diff options
Diffstat (limited to 'board/freescale/t208xrdb/eth_t208xrdb.c')
-rw-r--r-- | board/freescale/t208xrdb/eth_t208xrdb.c | 112 |
1 files changed, 34 insertions, 78 deletions
diff --git a/board/freescale/t208xrdb/eth_t208xrdb.c b/board/freescale/t208xrdb/eth_t208xrdb.c index b0ff4b1..e4592ea 100644 --- a/board/freescale/t208xrdb/eth_t208xrdb.c +++ b/board/freescale/t208xrdb/eth_t208xrdb.c @@ -26,84 +26,7 @@ #include <fsl_dtsec.h> #include <asm/fsl_serdes.h> -int board_eth_init(struct bd_info *bis) -{ -#if defined(CONFIG_FMAN_ENET) - int i, interface; - struct memac_mdio_info dtsec_mdio_info; - struct memac_mdio_info tgec_mdio_info; - struct mii_dev *dev; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 srds_s1; - - srds_s1 = in_be32(&gur->rcwsr[4]) & - FSL_CORENET2_RCWSR4_SRDS1_PRTCL; - srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; - - dtsec_mdio_info.regs = - (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; - - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - /* Register the 1G MDIO bus */ - fm_memac_mdio_init(bis, &dtsec_mdio_info); - - tgec_mdio_info.regs = - (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; - tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; - - /* Register the 10G MDIO bus */ - fm_memac_mdio_init(bis, &tgec_mdio_info); - - /* Set the two on-board RGMII PHY address */ - fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR); - - switch (srds_s1) { - case 0x66: - case 0x6b: - fm_info_set_phy_address(FM1_10GEC1, CORTINA_PHY_ADDR1); - fm_info_set_phy_address(FM1_10GEC2, CORTINA_PHY_ADDR2); - fm_info_set_phy_address(FM1_10GEC3, FM1_10GEC3_PHY_ADDR); - fm_info_set_phy_address(FM1_10GEC4, FM1_10GEC4_PHY_ADDR); - break; - default: - printf("SerDes1 protocol 0x%x is not supported on T208xRDB\n", - srds_s1); - break; - } - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - interface = fm_info_get_enet_if(i); - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); - fm_info_set_mdio(i, dev); - break; - default: - break; - } - } - - for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_XGMII: - dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); - fm_info_set_mdio(i, dev); - break; - default: - break; - } - } - - cpu_eth_init(bis); -#endif /* CONFIG_FMAN_ENET */ - - return pci_eth_init(bis); -} +extern u8 get_hw_revision(void); /* Disable the MAC5 and MAC6 "fsl,fman-memac" nodes and the two * "fsl,dpa-ethernet" nodes that reference them. @@ -139,6 +62,39 @@ void fdt_fixup_board_fman_ethernet(void *fdt) } } +/* Update the address of the second Aquantia PHY on boards revision D and up. + * Also rename the PHY node to align with the address change. + */ +void fdt_fixup_board_phy(void *fdt) +{ + const char phy_path[] = + "/soc@ffe000000/fman@400000/mdio@fd000/ethernet-phy@1"; + int ret, offset, new_addr = AQR113C_PHY_ADDR2; + char new_name[] = "ethernet-phy@00"; + + if (get_hw_revision() == 'C') + return; + + offset = fdt_path_offset(fdt, phy_path); + if (offset < 0) { + printf("ethernet-phy@1 node not found in the dts\n"); + return; + } + + ret = fdt_setprop(fdt, offset, "reg", &new_addr, sizeof(new_addr)); + if (ret < 0) { + printf("Unable to set 'reg' for node ethernet-phy@1: %s\n", + fdt_strerror(ret)); + return; + } + + sprintf(new_name, "ethernet-phy@%x", new_addr); + ret = fdt_set_name(fdt, offset, new_name); + if (ret < 0) + printf("Unable to rename node ethernet-phy@1: %s\n", + fdt_strerror(ret)); +} + void fdt_fixup_board_enet(void *fdt) { return; |