1 files changed, 0 insertions, 364 deletions
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
deleted file mode 100644
index d10160d..0000000
--- a/board/freescale/p1022ds/p1022ds.c
+++ /dev/null
@@ -1,364 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2012 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- *          Timur Tabi <timur@freescale.com>
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <image.h>
-#include <init.h>
-#include <log.h>
-#include <net.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <asm/fsl_law.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <hwconfig.h>
-
-#include "../common/ngpixis.h"
-
-int board_early_init_f(void)
-{
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-	/* Set pmuxcr to allow both i2c1 and i2c2 */
-	setbits_be32(&gur->pmuxcr, 0x1000);
-#ifdef CONFIG_SYS_RAMBOOT
-	setbits_be32(&gur->pmuxcr,
-		in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
-#endif
-
-	/* Read back the register to synchronize the write. */
-	in_be32(&gur->pmuxcr);
-
-	/* Set the pin muxing to enable ETSEC2. */
-	clrbits_be32(&gur->pmuxcr2, 0x001F8000);
-
-	/* Enable the SPI */
-	clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	u8 sw;
-
-	printf("Board: P1022DS Sys ID: 0x%02x, "
-	       "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-		in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
-
-	sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
-
-	switch ((sw & PIXIS_LBMAP_MASK) >> 6) {
-	case 0:
-		printf ("vBank: %u\n", ((sw & 0x30) >> 4));
-		break;
-	case 1:
-		printf ("NAND\n");
-		break;
-	case 2:
-	case 3:
-		puts ("Promjet\n");
-		break;
-	}
-
-	return 0;
-}
-
-#define CONFIG_TFP410_I2C_ADDR	0x38
-
-/* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */
-#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK	0x0c
-#define CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK	0x03
-
-/* Route the I2C1 pins to the SSI port instead. */
-#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI	0x08
-
-/* Choose the 12.288Mhz codec reference clock */
-#define CONFIG_PIXIS_BRDCFG1_AUDCLK_12		0x02
-
-/* Choose the 11.2896Mhz codec reference clock */
-#define CONFIG_PIXIS_BRDCFG1_AUDCLK_11		0x01
-
-/* Connect to USB2 */
-#define CONFIG_PIXIS_BRDCFG0_USB2		0x10
-/* Connect to TFM bus */
-#define CONFIG_PIXIS_BRDCFG1_TDM		0x0c
-/* Connect to SPI */
-#define CONFIG_PIXIS_BRDCFG0_SPI		0x80
-
-int misc_init_r(void)
-{
-	u8 temp;
-	const char *audclk;
-	size_t arglen;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	/* For DVI, enable the TFP410 Encoder. */
-
-	temp = 0xBF;
-	if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
-		return -1;
-	if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
-		return -1;
-	debug("DVI Encoder Read: 0x%02x\n", temp);
-
-	temp = 0x10;
-	if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
-		return -1;
-	if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
-		return -1;
-	debug("DVI Encoder Read: 0x%02x\n",temp);
-
-	/* Enable the USB2 in PMUXCR2 and FGPA */
-	if (hwconfig("usb2")) {
-		clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK,
-			MPC85xx_PMUXCR2_USB);
-		setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2);
-	}
-
-	/* tdm and audio can not enable simultaneous*/
-	if (hwconfig("tdm") && hwconfig("audclk")){
-		printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n");
-		return -1;
-	}
-
-	/* Enable the TDM in PMUXCR and FGPA */
-	if (hwconfig("tdm")) {
-		clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK,
-			MPC85xx_PMUXCR_TDM);
-		setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM);
-		/* TDM need some configration option by SPI */
-		clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK,
-			MPC85xx_PMUXCR_SPI);
-		setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI);
-	}
-
-	/*
-	 * Enable the reference clock for the WM8776 codec, and route the MUX
-	 * pins for SSI. The default is the 12.288 MHz clock
-	 */
-
-	if (hwconfig("audclk")) {
-		temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
-			CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
-		temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
-
-		audclk = hwconfig_arg("audclk", &arglen);
-		/* Check the first two chars only */
-		if (audclk && (strncmp(audclk, "11", 2) == 0))
-			temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
-		else
-			temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
-		setbits_8(&pixis->brdcfg1, temp);
-	}
-
-	return 0;
-}
-
-/*
- * A list of PCI and SATA slots
- */
-enum slot_id {
-	SLOT_PCIE1 = 1,
-	SLOT_PCIE2,
-	SLOT_PCIE3,
-	SLOT_PCIE4,
-	SLOT_PCIE5,
-	SLOT_SATA1,
-	SLOT_SATA2
-};
-
-/*
- * This array maps the slot identifiers to their names on the P1022DS board.
- */
-static const char *slot_names[] = {
-	[SLOT_PCIE1] = "Slot 1",
-	[SLOT_PCIE2] = "Slot 2",
-	[SLOT_PCIE3] = "Slot 3",
-	[SLOT_PCIE4] = "Slot 4",
-	[SLOT_PCIE5] = "Mini-PCIe",
-	[SLOT_SATA1] = "SATA 1",
-	[SLOT_SATA2] = "SATA 2",
-};
-
-/*
- * This array maps a given SERDES configuration and SERDES device to the PCI or
- * SATA slot that it connects to.  This mapping is hard-coded in the FPGA.
- */
-static u8 serdes_dev_slot[][SATA2 + 1] = {
-	[0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
-	[0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
-	[0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
-		   [PCIE2] = SLOT_PCIE5 },
-	[0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
-		   [PCIE2] = SLOT_PCIE3,
-		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
-	[0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
-		   [PCIE2] = SLOT_PCIE3 },
-	[0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
-		   [PCIE2] = SLOT_PCIE3,
-		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
-	[0x1c] = { [PCIE1] = SLOT_PCIE1,
-		   [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
-	[0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
-	[0x1f] = { [PCIE1] = SLOT_PCIE1 },
-};
-
-
-/*
- * Returns the name of the slot to which the PCIe or SATA controller is
- * connected
- */
-const char *board_serdes_name(enum srds_prtcl device)
-{
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	u32 pordevsr = in_be32(&gur->pordevsr);
-	unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
-				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
-	enum slot_id slot = serdes_dev_slot[srds_cfg][device];
-	const char *name = slot_names[slot];
-
-	if (name)
-		return name;
-	else
-		return "Nothing";
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash + promjet */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	return 0;
-}
-
-/*
- * Initialize on-board and/or PCI Ethernet devices
- *
- * Returns:
- *      <0, error
- *       0, no ethernet devices found
- *      >0, number of ethernet devices initialized
- */
-int board_eth_init(bd_t *bis)
-{
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[2];
-	unsigned int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-/**
- * ft_codec_setup - fix up the clock-frequency property of the codec node
- *
- * Update the clock-frequency property based on the value of the 'audclk'
- * hwconfig option.  If audclk is not specified, then don't write anything
- * to the device tree, because it means that the codec clock is disabled.
- */
-static void ft_codec_setup(void *blob, const char *compatible)
-{
-	const char *audclk;
-	size_t arglen;
-	u32 freq;
-
-	audclk = hwconfig_arg("audclk", &arglen);
-	if (audclk) {
-		if (strncmp(audclk, "11", 2) == 0)
-			freq = 11289600;
-		else
-			freq = 12288000;
-
-		do_fixup_by_compat_u32(blob, compatible, "clock-frequency",
-				       freq, 1);
-	}
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = env_get_bootm_low();
-	size = env_get_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-	fsl_fdt_fixup_dr_usb(blob, bd);
-#endif
-
-	FT_FSL_PCI_SETUP;
-
-#ifdef CONFIG_FSL_SGMII_RISER
-	fsl_sgmii_riser_fdt_fixup(blob);
-#endif
-
-	/* Update the WM8776 node's clock frequency property */
-	ft_codec_setup(blob, "wlf,wm8776");
-
-	return 0;
-}
-#endif