diff options
Diffstat (limited to 'board/amlogic/s400/README')
-rw-r--r-- | board/amlogic/s400/README | 109 |
1 files changed, 0 insertions, 109 deletions
diff --git a/board/amlogic/s400/README b/board/amlogic/s400/README deleted file mode 100644 index a48db22..0000000 --- a/board/amlogic/s400/README +++ /dev/null @@ -1,109 +0,0 @@ -U-Boot for Amlogic S400 -======================= - -S400 is a reference board manufactured by Amlogic with the following -specifications: - - - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz - - 1GB DDR4 SDRAM - - 10/100 Ethernet - - 2 x USB 2.0 Host - - eMMC - - Infrared receiver - - SDIO WiFi Module - - MIPI DSI Connector - - Audio HAT Connector - - PCI-E M.2 Connectors - -Schematics are available from Amlogic on demand. - -Currently the u-boot port supports the following devices: - - serial - - eMMC - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make s400_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make axg_s400_v1_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/axg/bl2.bin fip/ - > cp $FIPDIR/axg/acs.bin fip/ - > cp $FIPDIR/axg/bl21.bin fip/ - > cp $FIPDIR/axg/bl30.bin fip/ - > cp $FIPDIR/axg/bl301.bin fip/ - > cp $FIPDIR/axg/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/axg/aml_encrypt_axg --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 |