diff options
Diffstat (limited to 'board/BuR')
| -rw-r--r-- | board/BuR/brxre1/MAINTAINERS | 1 | ||||
| -rw-r--r-- | board/BuR/brxre1/board.c | 77 | ||||
| -rw-r--r-- | board/BuR/common/common.c | 7 |
3 files changed, 52 insertions, 33 deletions
diff --git a/board/BuR/brxre1/MAINTAINERS b/board/BuR/brxre1/MAINTAINERS index a10d9c1..eb0fe8b 100644 --- a/board/BuR/brxre1/MAINTAINERS +++ b/board/BuR/brxre1/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/BuR/brxre1/ F: include/configs/brxre1.h F: configs/brxre1_defconfig +F: arch/arm/dts/am335x-brxre1.dts diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c index 82c53d5..2d0ed41 100644 --- a/board/BuR/brxre1/board.c +++ b/board/BuR/brxre1/board.c @@ -22,6 +22,7 @@ #include <asm/io.h> #include <asm/emif.h> #include <asm/gpio.h> +#include <dm.h> #include <i2c.h> #include <power/tps65217.h> #include "../common/bur_common.h" @@ -48,6 +49,25 @@ DECLARE_GLOBAL_DATA_PTR; +static int rstctrl_rw(u8 reg, unsigned char rnw, void *pdat, int size) +{ + struct udevice *i2cdev; + int rc; + + rc = i2c_get_chip_for_busnum(0, RSTCTRL_ADDR, 1, &i2cdev); + if (rc >= 0) { + if (rnw) + rc = dm_i2c_read(i2cdev, reg, pdat, size); + else + rc = dm_i2c_write(i2cdev, reg, pdat, size); + } else { + printf("%s: cannot get udevice for chip 0x%02x!\n", + __func__, RSTCTRL_ADDR); + } + + return rc; +} + #if defined(CONFIG_SPL_BUILD) /* TODO: check ram-timing ! */ static const struct ddr_data ddr3_data = { @@ -89,8 +109,8 @@ const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1}; void am33xx_spl_board_init(void) { - unsigned int oldspeed; unsigned short buf; + int rc; struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; @@ -114,23 +134,19 @@ void am33xx_spl_board_init(void) }; do_enable_clocks(clk_domains, clk_modules_xre1specific, 1); /* power-OFF LCD-Display */ - gpio_direction_output(LCD_PWR, 0); + if (gpio_request(LCD_PWR, "LCD_PWR") != 0) + printf("cannot request gpio for LCD_PWR!\n"); + else if (gpio_direction_output(LCD_PWR, 0) != 0) + printf("cannot set direction output on LCD_PWR!\n"); /* setup I2C */ enable_i2c_pin_mux(); - i2c_set_bus_num(0); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - /* power-ON 3V3 via Resetcontroller */ - oldspeed = i2c_get_bus_speed(); - if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) { - buf = RSTCTRL_FORCE_PWR_NEN | RSTCTRL_CAN_STB; - i2c_write(RSTCTRL_ADDR, RSTCTRL_CTRLREG, 1, - (uint8_t *)&buf, sizeof(buf)); - i2c_set_bus_speed(oldspeed); - } else { - puts("ERROR: i2c_set_bus_speed failed! (turn on PWR_nEN)\n"); - } + /* power-ON 3V3 via Resetcontroller */ + buf = RSTCTRL_FORCE_PWR_NEN | RSTCTRL_CAN_STB; + rc = rstctrl_rw(RSTCTRL_CTRLREG, 0, (uint8_t *)&buf, sizeof(buf)); + if (rc != 0) + printf("ERROR: cannot write to resetc (turn on PWR_nEN)\n"); pmicsetup(0, 0); } @@ -153,7 +169,9 @@ void sdram_init(void) */ int board_init(void) { - gpmc_init(); + if (power_tps65217_init(0)) + printf("WARN: cannot setup PMIC 0x24 @ bus #0, not found!.\n"); + return 0; } @@ -164,19 +182,16 @@ int board_late_init(void) unsigned int cnt = 3; unsigned short buf = 0xAAAA; unsigned char scratchreg = 0; - unsigned int oldspeed; + int rc; /* try to read out some boot-instruction from resetcontroller */ - oldspeed = i2c_get_bus_speed(); - if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) { - i2c_read(RSTCTRL_ADDR, RSTCTRL_SCRATCHREG, 1, - &scratchreg, sizeof(scratchreg)); - i2c_set_bus_speed(oldspeed); - } else { - puts("ERROR: i2c_set_bus_speed failed! (scratchregister)\n"); - } + rc = rstctrl_rw(RSTCTRL_SCRATCHREG, 1, &scratchreg, sizeof(scratchreg)); + if (rc != 0) + printf("ERROR: read scratchregister (resetc) failed!\n"); - if (gpio_get_value(ESC_KEY)) { + if (gpio_request(ESC_KEY, "boot-key") != 0) { + printf("cannot request boot-key!\n"); + } else if (gpio_get_value(ESC_KEY)) { do { lcd_position_cursor(1, 8); switch (cnt) { @@ -266,14 +281,10 @@ int board_late_init(void) break; } /* write bootinfo into scratchregister of resetcontroller */ - oldspeed = i2c_get_bus_speed(); - if (i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC) >= 0) { - i2c_write(RSTCTRL_ADDR, RSTCTRL_SCRATCHREG, 1, - (uint8_t *)&buf, sizeof(buf)); - i2c_set_bus_speed(oldspeed); - } else { - puts("ERROR: i2c_set_bus_speed failed! (scratchregister)\n"); - } + rc = rstctrl_rw(RSTCTRL_SCRATCHREG, 0, (uint8_t *)&buf, sizeof(buf)); + if (rc != 0) + printf("ERROR: write scratchregister (resetc) failed!\n"); + /* setup othbootargs for bootvx-command (vxWorks bootline) */ char othbootargs[128]; snprintf(othbootargs, sizeof(othbootargs), diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index a1f7c44..602c571 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -181,6 +181,7 @@ void br_summaryscreen(void) void lcdpower(int on) { u32 pin, swval, i; + char buf[16] = { 0 }; pin = env_get_ulong("ds1_pwr", 16, ~0UL); @@ -191,6 +192,12 @@ void lcdpower(int on) for (i = 0; i < 3; i++) { if (pin != 0) { + snprintf(buf, sizeof(buf), "ds1_pwr#%d", i); + if (gpio_request(pin & 0x7F, buf) != 0) { + printf("%s: not able to request gpio %s", + __func__, buf); + continue; + } swval = pin & 0x80 ? 0 : 1; if (on) gpio_direction_output(pin & 0x7F, swval); |