diff options
Diffstat (limited to 'arch')
23 files changed, 53 insertions, 53 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index d0103fc..1a359d0 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -1147,7 +1147,7 @@ int arch_early_init_r(void) #endif #ifdef CONFIG_SYS_FSL_HAS_RGMII /* some dpmacs in armv8a based freescale layerscape SOCs can be - * configured via both serdes(sgmii, xfi, xlaui etc) bits and via + * configured via both serdes(sgmii, 10gbase-r, xlaui etc) bits and via * EC*_PMUX(rgmii) bits in RCW. * e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from * serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc index f33d05d..f2efd4c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc @@ -31,7 +31,7 @@ The LS1043A SoC includes the following function and features: - Hardware buffer management for buffer allocation and de-allocation (BMan) - Cryptography acceleration (SEC) - Ethernet interfaces by FMan - - Up to 1 x XFI supporting 10G interface + - Up to 1 x 10GBase-R supporting 10G interface - Up to 1 x QSGMII - Up to 4 x SGMII supporting 1000Mbps - Up to 2 x SGMII supporting 2500Mbps @@ -190,7 +190,7 @@ The LS1046A SoC includes the following function and features: - Two PLLs per four-lane SerDes - Support for 10G operation - Ethernet interfaces by FMan - - Up to 2 x XFI supporting 10G interface (MAC 9, 10) + - Up to 2 x 10GBase-R supporting 10G interface (MAC 9, 10) - Up to 1 x QSGMII (MAC 5, 6, 10, 1) - Up to 4 x SGMII supporting 1000Mbps (MAC 5, 6, 9, 10) - Up to 3 x SGMII supporting 2500Mbps (MAC 5, 9, 10) @@ -295,7 +295,7 @@ The LX2160A SoC includes the following function and features: Single WRIOP tile supporting 130Gbps using 18 MACs Support for 10G-SXGMII (aka USXGMII). Support for SGMII (and 1000Base-KX) - Support for XFI (and 10GBase-KR) + Support for 10GBase-R (and 10GBase-KR) Support for CAUI4 (100G); CAUI2 (50G) and 25G-AUI(25G). Support for XLAUI (and 40GBase-KR4) for 40G. Support for two RGMII parallel interfaces. @@ -400,7 +400,7 @@ The LX2162A SoC includes the following function and features: Ethernet interfaces Support for 10G-SXGMII (aka USXGMII). Support for SGMII (and 1000Base-KX) - Support for XFI (and 10GBase-KR) + Support for 10GBase-R (and 10GBase-KR) Support for CAUI2 (50G) and 25G-AUI(25G). Support for XLAUI (and 40GBase-KR4) for 40G. Support for two RGMII parallel interfaces. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c index 280afbb..26f8a49 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c @@ -100,7 +100,7 @@ enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) return 0; /* - * LS1044A/1048A support only one XFI port + * LS1044A/1048A support only one 10GBase-R port * Disable MAC1 for LS1044A/1048A */ if (serdes == FSL_SRDS_1 && lane == 2) { diff --git a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi index 23816da..4063d9a 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 1xxx * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* diff --git a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi index c6558ae..548ab2b 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 6xxx * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* @@ -14,6 +14,6 @@ &enetc0 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi index 5a0f060..3991fb7 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 7777 * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* @@ -30,25 +30,25 @@ &mscc_felix_port0 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>; }; &mscc_felix_port1 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>; }; &mscc_felix_port2 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; &mscc_felix_port3 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi index 39a83e1..d68c8c2 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 7xx7 * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ &slot1 { @@ -19,13 +19,13 @@ &mscc_felix_port0 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; }; &mscc_felix_port3 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi index 7d4702e..94b5081 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 8xxx * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi index 021fe3f..3b85026 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 9999 * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi index b6704d8..eb63214 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 9999 * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP * */ diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi index 8c10897..ed86da6 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW x3xx * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi index 1d800da..c9de4ec 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW x5xx * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi index 1fb2cdf..7f78550 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 7777 * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ &slot2 { @@ -19,7 +19,7 @@ &mscc_felix_port1 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi index 2333f74..0fbe772 100644 --- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi @@ -2,7 +2,7 @@ /* * NXP LS1028A-QDS device tree fragment for RCW 7777 * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ &slot3 { @@ -19,7 +19,7 @@ &mscc_felix_port2 { status = "okay"; - phy-mode = "sgmii-2500"; + phy-mode = "2500base-x"; phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>; }; diff --git a/arch/arm/dts/fsl-ls1088a-qds-sd1-21.dtsi b/arch/arm/dts/fsl-ls1088a-qds-sd1-21.dtsi index e0a6c04..df39cca 100644 --- a/arch/arm/dts/fsl-ls1088a-qds-sd1-21.dtsi +++ b/arch/arm/dts/fsl-ls1088a-qds-sd1-21.dtsi @@ -9,12 +9,12 @@ &dpmac1 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac2 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac4 { diff --git a/arch/arm/dts/fsl-ls1088a-qds-sd1-29.dtsi b/arch/arm/dts/fsl-ls1088a-qds-sd1-29.dtsi index 65e9530..99f74c2 100644 --- a/arch/arm/dts/fsl-ls1088a-qds-sd1-29.dtsi +++ b/arch/arm/dts/fsl-ls1088a-qds-sd1-29.dtsi @@ -9,10 +9,10 @@ &dpmac1 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac2 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; diff --git a/arch/arm/dts/fsl-ls2080a-qds-sd1-42.dtsi b/arch/arm/dts/fsl-ls2080a-qds-sd1-42.dtsi index ccbb5de..72297f4 100644 --- a/arch/arm/dts/fsl-ls2080a-qds-sd1-42.dtsi +++ b/arch/arm/dts/fsl-ls2080a-qds-sd1-42.dtsi @@ -9,40 +9,40 @@ &dpmac1 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac2 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac3 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac4 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac5 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac6 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac7 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac8 { status = "okay"; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; diff --git a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts index 179ed19..9e68c14 100644 --- a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts +++ b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts @@ -24,49 +24,49 @@ &dpmac1 { status = "okay"; phy-handle = <&mdio1_phy1>; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac2 { status = "okay"; phy-handle = <&mdio1_phy2>; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac3 { status = "okay"; phy-handle = <&mdio1_phy3>; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac4 { status = "okay"; phy-handle = <&mdio1_phy4>; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac5 { status = "okay"; phy-handle = <&mdio2_phy1>; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac6 { status = "okay"; phy-handle = <&mdio2_phy2>; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac7 { status = "okay"; phy-handle = <&mdio2_phy3>; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &dpmac8 { status = "okay"; phy-handle = <&mdio2_phy4>; - phy-connection-type = "xfi"; + phy-connection-type = "10gbase-r"; }; &emdio1 { diff --git a/arch/arm/dts/fsl-sch-24801.dtsi b/arch/arm/dts/fsl-sch-24801.dtsi index 304afda..d1b43aa 100644 --- a/arch/arm/dts/fsl-sch-24801.dtsi +++ b/arch/arm/dts/fsl-sch-24801.dtsi @@ -2,7 +2,7 @@ /* * Device tree fragment for RCW SCH-24801 card * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* diff --git a/arch/arm/dts/fsl-sch-28021.dtsi b/arch/arm/dts/fsl-sch-28021.dtsi index 584f3fa..6124528 100644 --- a/arch/arm/dts/fsl-sch-28021.dtsi +++ b/arch/arm/dts/fsl-sch-28021.dtsi @@ -2,7 +2,7 @@ /* * Device tree fragment for RCW SCH-28021 card * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* diff --git a/arch/arm/dts/fsl-sch-30841.dtsi b/arch/arm/dts/fsl-sch-30841.dtsi index ca437d1..28b1bec 100644 --- a/arch/arm/dts/fsl-sch-30841.dtsi +++ b/arch/arm/dts/fsl-sch-30841.dtsi @@ -2,14 +2,14 @@ /* * Device tree fragment for RCW SCH-30841 card * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* * SCH-30841 is a 4 port add-on card used with various FSL QDS boards. * It integrates a AQR412C quad PHY which supports 4 interfaces either muxed * together on a single lane or mapped 1:1 to serdes lanes. - * It supports several protocols - SGMII, SGMII-2500, USXGMII, M-USX, XFI. + * It supports several protocols - SGMII, 2500base-X, USXGMII, M-USX, 10GBase-R. * PHY addresses are 0x00 - 0x03. * On the card the first port is the bottom port (closest to PEX connector). */ diff --git a/arch/arm/dts/fsl-sch-30842.dtsi b/arch/arm/dts/fsl-sch-30842.dtsi index fa0f2cd..bff9e76 100644 --- a/arch/arm/dts/fsl-sch-30842.dtsi +++ b/arch/arm/dts/fsl-sch-30842.dtsi @@ -2,13 +2,13 @@ /* * Device tree fragment for RCW SCH-30842 card * - * Copyright 2019-2021 NXP Semiconductors + * Copyright 2019-2021 NXP */ /* * SCH-30842 is a single port add-on card used with various FSL QDS boards. * It integrates a AQR112 PHY, which supports several protocols - SGMII, - * SGMII-2500, USXGMII, XFI. + * 2500base-x, USXGMII, 10GBase-R. * PHY address is 0x02. */ phy@02 { diff --git a/arch/arm/dts/ls1021a-tsn.dts b/arch/arm/dts/ls1021a-tsn.dts index f633074..8e0f4ea 100644 --- a/arch/arm/dts/ls1021a-tsn.dts +++ b/arch/arm/dts/ls1021a-tsn.dts @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright 2016-2018 NXP Semiconductors +/* Copyright 2016-2018 NXP * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> */ |