diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/Kconfig | 3 | ||||
| -rw-r--r-- | arch/arm/dts/qcom-ipq4019.dtsi | 93 | ||||
| -rw-r--r-- | arch/arm/mach-ipq40xx/clock-ipq4019.c | 4 |
3 files changed, 98 insertions, 2 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 80702c2..68d6d1a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -767,8 +767,11 @@ config ARCH_IPQ40XX select DM select DM_GPIO select DM_SERIAL + select DM_RESET + select MSM_SMEM select PINCTRL select CLK + select SMEM select OF_CONTROL imply CMD_DM diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi index 5f78bc5..e0e4188 100644 --- a/arch/arm/dts/qcom-ipq4019.dtsi +++ b/arch/arm/dts/qcom-ipq4019.dtsi @@ -10,6 +10,8 @@ #include "skeleton.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/pinctrl-snapdragon.h> +#include <dt-bindings/clock/qcom,ipq4019-gcc.h> +#include <dt-bindings/reset/qcom,ipq4019-reset.h> / { #address-cells = <1>; @@ -38,6 +40,11 @@ }; }; + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -52,6 +59,14 @@ u-boot,dm-pre-reloc; }; + reset: gcc-reset@1800000 { + compatible = "qcom,gcc-reset-ipq4019"; + reg = <0x1800000 0x60000>; + #clock-cells = <1>; + #reset-cells = <1>; + u-boot,dm-pre-reloc; + }; + pinctrl: qcom,tlmm@1000000 { compatible = "qcom,tlmm-ipq4019"; reg = <0x1000000 0x300000>; @@ -61,7 +76,7 @@ blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78af000 0x200>; - clock = <&gcc 26>; + clock = <&gcc GCC_BLSP1_UART1_APPS_CLK>; bit-rate = <0xFF>; status = "disabled"; u-boot,dm-pre-reloc; @@ -75,5 +90,81 @@ gpio-bank-name="soc"; #gpio-cells = <2>; }; + + usb3_ss_phy: ssphy@9a000 { + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; + reg = <0x9a000 0x800>; + reg-names = "phy_base"; + resets = <&reset USB3_UNIPHY_PHY_ARES>; + reset-names = "por_rst"; + status = "disabled"; + }; + + usb3_hs_phy: hsphy@a6000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa6000 0x40>; + reg-names = "phy_base"; + resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb3: usb3@8af8800 { + compatible = "qcom,dwc3"; + reg = <0x8af8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB3_MASTER_CLK>, + <&gcc GCC_USB3_SLEEP_CLK>, + <&gcc GCC_USB3_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xf8000>; + phys = <&usb3_hs_phy>, <&usb3_ss_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + maximum-speed = "super-speed"; + snps,dis_u2_susphy_quirk; + }; + }; + + usb2_hs_phy: hsphy@a8000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa8000 0x40>; + reg-names = "phy_base"; + resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb2: usb2@60f8800 { + compatible = "qcom,dwc3"; + reg = <0x60f8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB2_MASTER_CLK>, + <&gcc GCC_USB2_SLEEP_CLK>, + <&gcc GCC_USB2_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@6000000 { + compatible = "snps,dwc3"; + reg = <0x6000000 0xf8000>; + phys = <&usb2_hs_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + }; + }; }; }; diff --git a/arch/arm/mach-ipq40xx/clock-ipq4019.c b/arch/arm/mach-ipq40xx/clock-ipq4019.c index 7cf98a2..83a688e 100644 --- a/arch/arm/mach-ipq40xx/clock-ipq4019.c +++ b/arch/arm/mach-ipq40xx/clock-ipq4019.c @@ -13,6 +13,8 @@ #include <dm.h> #include <errno.h> +#include <dt-bindings/clock/qcom,ipq4019-gcc.h> + struct msm_clk_priv { phys_addr_t base; }; @@ -20,7 +22,7 @@ struct msm_clk_priv { ulong msm_set_rate(struct clk *clk, ulong rate) { switch (clk->id) { - case 26: /*UART1*/ + case GCC_BLSP1_UART1_APPS_CLK: /*UART1*/ /* This clock is already initialized by SBL1 */ return 0; break; |