diff options
Diffstat (limited to 'arch/x86/cpu')
35 files changed, 3491 insertions, 96 deletions
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index 6296b55..5b40838 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -41,6 +41,7 @@ extra-y += call32.o endif obj-y += intel_common/ +obj-$(CONFIG_INTEL_APOLLOLAKE) += apollolake/ obj-$(CONFIG_INTEL_BAYTRAIL) += baytrail/ obj-$(CONFIG_INTEL_BRASWELL) += braswell/ obj-$(CONFIG_INTEL_BROADWELL) += broadwell/ @@ -53,7 +54,8 @@ obj-$(CONFIG_INTEL_QUARK) += quark/ obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/ obj-$(CONFIG_INTEL_TANGIER) += tangier/ obj-$(CONFIG_APIC) += lapic.o ioapic.o -obj-y += irq.o +obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o +obj-$(CONFIG_QFW) += qfw_cpu.o ifndef CONFIG_$(SPL_)X86_64 obj-$(CONFIG_SMP) += mp_init.o endif diff --git a/arch/x86/cpu/apollolake/Kconfig b/arch/x86/cpu/apollolake/Kconfig new file mode 100644 index 0000000..fcff176 --- /dev/null +++ b/arch/x86/cpu/apollolake/Kconfig @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright 2019 Google LLC +# + +config INTEL_APOLLOLAKE + bool + select FSP_VERSION2 + select HAVE_FSP + select ARCH_MISC_INIT + select USE_CAR + select INTEL_PMC + select TPL_X86_TSC_TIMER_NATIVE + select SPL_PCH_SUPPORT + select TPL_PCH_SUPPORT + select PCH_SUPPORT + select P2SB + imply ENABLE_MRC_CACHE + imply AHCI_PCI + imply SCSI + imply SCSI_AHCI + imply SPI_FLASH + imply USB + imply USB_EHCI_HCD + imply TPL + imply SPL + imply TPL_X86_16BIT_INIT + imply TPL_OF_PLATDATA + imply ACPI_PMC + imply MMC + imply DM_MMC + imply MMC_PCI + imply MMC_SDHCI + imply CMD_MMC + imply VIDEO_FSP + imply PINCTRL_INTEL + imply PINCTRL_INTEL_APL + imply HAVE_VBT + imply HAVE_X86_FIT + imply INTEL_GPIO + imply SMP + +if INTEL_APOLLOLAKE + +config DCACHE_RAM_BASE + default 0xfef00000 + +config DCACHE_RAM_SIZE + default 0xc0000 + +config DCACHE_RAM_MRC_VAR_SIZE + default 0xb0000 + +config CPU_SPECIFIC_OPTIONS + def_bool y + select SMM_TSEG + select X86_RAMTEST + +config SMM_TSEG_SIZE + hex + default 0x800000 + +config MMCONF_BASE_ADDRESS + hex + default 0xe0000000 + +config TPL_SIZE_LIMIT + default 0x7800 + +config CPU_ADDR_BITS + default 39 + +config APL_SPI_FLASH_BOOT + bool "Support booting with SPI-flash driver instead memory-mapped SPI" + select TPL_SPI_FLASH_SUPPORT + select TPL_SPI_SUPPORT + help + This enables SPI and SPI flash in TPL. Without the this only + available boot method is to use memory-mapped SPI. Since this is + actually fast and produces a TPL which is 7KB smaller, memory-mapped + SPI is the default. + +config APL_BOOT_FROM_FAST_SPI_FLASH + bool "Boot using SPI flash driver" + select APL_SPI_FLASH_BOOT + help + This option is separate from APL_SPI_FLASH_BOOT since it is useful to + be able to compare booting speed with the same build. Enable this to + use the SPI-flash driver to load SPL, U-Boot and FSP-M. For technical + reasons FSP-S is currently always loaded from memory-mapped SPI. See + Apollo Lake's arch_fsp_init_r() for details about that. + +config VBT_ADDR + default 0xff3f1000 + +endif diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile new file mode 100644 index 0000000..1760df5 --- /dev/null +++ b/arch/x86/cpu/apollolake/Makefile @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2019 Google LLC + +obj-$(CONFIG_SPL_BUILD) += cpu_spl.o +obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_SPL_BUILD) += systemagent.o +obj-y += cpu_common.o + +ifndef CONFIG_TPL_BUILD +obj-y += cpu.o +obj-y += punit.o +ifdef CONFIG_SPL_BUILD +obj-y += fsp_m.o +endif +endif +ifndef CONFIG_SPL_BUILD +obj-y += fsp_s.o +endif + +obj-y += hostbridge.o +obj-y += itss.o +obj-y += lpc.o +obj-y += p2sb.o +obj-y += pch.o +obj-y += pmc.o +obj-y += uart.o diff --git a/arch/x86/cpu/apollolake/cpu.c b/arch/x86/cpu/apollolake/cpu.c new file mode 100644 index 0000000..3d05c82 --- /dev/null +++ b/arch/x86/cpu/apollolake/cpu.c @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + */ + +#include <common.h> +#include <cpu.h> +#include <dm.h> +#include <asm/cpu_common.h> +#include <asm/cpu_x86.h> + +static int apl_get_info(struct udevice *dev, struct cpu_info *info) +{ + return cpu_intel_get_info(info, INTEL_BCLK_MHZ); +} + +static int apl_get_count(struct udevice *dev) +{ + return 4; +} + +static const struct cpu_ops cpu_x86_apl_ops = { + .get_desc = cpu_x86_get_desc, + .get_info = apl_get_info, + .get_count = apl_get_count, + .get_vendor = cpu_x86_get_vendor, +}; + +static const struct udevice_id cpu_x86_apl_ids[] = { + { .compatible = "intel,apl-cpu" }, + { } +}; + +U_BOOT_DRIVER(cpu_x86_apl_drv) = { + .name = "cpu_x86_apl", + .id = UCLASS_CPU, + .of_match = cpu_x86_apl_ids, + .bind = cpu_x86_bind, + .ops = &cpu_x86_apl_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/arch/x86/cpu/apollolake/cpu_common.c b/arch/x86/cpu/apollolake/cpu_common.c new file mode 100644 index 0000000..ba6bda3 --- /dev/null +++ b/arch/x86/cpu/apollolake/cpu_common.c @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + */ + +#include <common.h> +#include <asm/cpu_common.h> +#include <asm/msr.h> + +void cpu_flush_l1d_to_l2(void) +{ + struct msr_t msr; + + msr = msr_read(MSR_POWER_MISC); + msr.lo |= FLUSH_DL1_L2; + msr_write(MSR_POWER_MISC, msr); +} diff --git a/arch/x86/cpu/apollolake/cpu_spl.c b/arch/x86/cpu/apollolake/cpu_spl.c new file mode 100644 index 0000000..8a39c31 --- /dev/null +++ b/arch/x86/cpu/apollolake/cpu_spl.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + * + * Portions taken from coreboot + */ + +#include <common.h> +#include <acpi_s3.h> +#include <dm.h> +#include <ec_commands.h> +#include <log.h> +#include <spi_flash.h> +#include <spl.h> +#include <syscon.h> +#include <asm/cpu.h> +#include <asm/cpu_common.h> +#include <asm/cpu_x86.h> +#include <asm/fast_spi.h> +#include <asm/intel_pinctrl.h> +#include <asm/intel_regs.h> +#include <asm/io.h> +#include <asm/msr.h> +#include <asm/mtrr.h> +#include <asm/pci.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/iomap.h> +#include <asm/arch/lpc.h> +#include <asm/arch/pch.h> +#include <asm/arch/systemagent.h> +#include <asm/arch/uart.h> +#include <asm/fsp2/fsp_api.h> +#include <linux/sizes.h> +#include <power/acpi_pmc.h> + +/* Define this here to avoid referencing any drivers for the debug UART 1 */ +#define PCH_DEV_P2SB PCI_BDF(0, 0x0d, 0) + +static void pch_uart_init(void) +{ + /* + * Set up the pinmux so that the UART rx/tx signals are connected + * outside the SoC. + * + * There are about 500 lines of code required to program the GPIO + * configuration for the UARTs. But it boils down to four writes, and + * for the debug UART we want the minimum possible amount of code before + * the UART is running. So just add the magic writes here. See + * apl_hostbridge_early_init_pinctrl() for the full horror. + */ + if (PCI_FUNC(PCH_DEV_UART) == 1) { + writel(0x40000402, 0xd0c50650); + writel(0x3c47, 0xd0c50654); + writel(0x40000400, 0xd0c50658); + writel(0x3c48, 0xd0c5065c); + } else { /* UART2 */ + writel(0x40000402, 0xd0c50670); + writel(0x3c4b, 0xd0c50674); + writel(0x40000400, 0xd0c50678); + writel(0x3c4c, 0xd0c5067c); + } + +#ifdef CONFIG_DEBUG_UART + apl_uart_init(PCH_DEV_UART, CONFIG_DEBUG_UART_BASE); +#endif +} + +static void p2sb_enable_bar(ulong bar) +{ + /* Enable PCR Base address in PCH */ + pci_x86_write_config(PCH_DEV_P2SB, PCI_BASE_ADDRESS_0, bar, + PCI_SIZE_32); + pci_x86_write_config(PCH_DEV_P2SB, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32); + + /* Enable P2SB MSE */ + pci_x86_write_config(PCH_DEV_P2SB, PCI_COMMAND, + PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY, + PCI_SIZE_8); +} + +/* + * board_debug_uart_init() - Init the debug UART ready for use + * + * This is the minimum init needed to get the UART running. It avoids any + * drivers or complex code, so that the UART is running as soon as possible. + */ +void board_debug_uart_init(void) +{ + p2sb_enable_bar(IOMAP_P2SB_BAR); + pch_uart_init(); +} + +static int fast_spi_cache_bios_region(void) +{ + uint map_size, offset; + ulong map_base, base; + int ret; + + ret = fast_spi_early_init(PCH_DEV_SPI, IOMAP_SPI_BASE); + if (ret) + return log_msg_ret("early_init", ret); + + ret = fast_spi_get_bios_mmap(PCH_DEV_SPI, &map_base, &map_size, + &offset); + if (ret) + return log_msg_ret("get_mmap", ret); + + base = SZ_4G - map_size; + mtrr_set_next_var(MTRR_TYPE_WRPROT, base, map_size); + log_debug("BIOS cache base=%lx, size=%x\n", base, (uint)map_size); + + return 0; +} + +static void enable_pm_timer_emulation(struct udevice *pmc) +{ + struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(pmc); + msr_t msr; + + /* + * The derived frequency is calculated as follows: + * (CTC_FREQ * msr[63:32]) >> 32 = target frequency. + * + * Back-solve the multiplier so the 3.579545MHz ACPI timer frequency is + * used. + */ + msr.hi = (3579545ULL << 32) / CTC_FREQ; + + /* Set PM1 timer IO port and enable */ + msr.lo = EMULATE_PM_TMR_EN | (upriv->acpi_base + R_ACPI_PM1_TMR); + debug("PM timer %x %x\n", msr.hi, msr.lo); + msr_write(MSR_EMULATE_PM_TIMER, msr); +} + +static void google_chromeec_ioport_range(uint *out_basep, uint *out_sizep) +{ + uint base; + uint size; + + if (IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC_MEC)) { + base = MEC_EMI_BASE; + size = MEC_EMI_SIZE; + } else { + base = EC_HOST_CMD_REGION0; + size = 2 * EC_HOST_CMD_REGION_SIZE; + /* Make sure MEMMAP region follows host cmd region */ + assert(base + size == EC_LPC_ADDR_MEMMAP); + size += EC_MEMMAP_SIZE; + } + + *out_basep = base; + *out_sizep = size; +} + +static void early_ec_init(void) +{ + uint base, size; + + /* + * Set up LPC decoding for the Chrome OS EC I/O port ranges: + * - Ports 62/66, 60/64, and 200->208 + * - Chrome OS EC communication I/O ports + */ + lpc_enable_fixed_io_ranges(LPC_IOE_EC_62_66 | LPC_IOE_KBC_60_64 | + LPC_IOE_LGE_200); + google_chromeec_ioport_range(&base, &size); + lpc_open_pmio_window(base, size); +} + +static int arch_cpu_init_tpl(void) +{ + struct udevice *pmc, *sa, *p2sb, *serial, *spi, *lpc; + int ret; + + ret = uclass_first_device_err(UCLASS_ACPI_PMC, &pmc); + if (ret) + return log_msg_ret("PMC", ret); + + /* Clear global reset promotion bit */ + ret = pmc_global_reset_set_enable(pmc, false); + if (ret) + return log_msg_ret("disable global reset", ret); + + enable_pm_timer_emulation(pmc); + + ret = uclass_first_device_err(UCLASS_P2SB, &p2sb); + if (ret) + return log_msg_ret("p2sb", ret); + ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &sa); + if (ret) + return log_msg_ret("northbridge", ret); + gd->baudrate = CONFIG_BAUDRATE; + ret = uclass_first_device_err(UCLASS_SERIAL, &serial); + if (ret) + return log_msg_ret("serial", ret); + if (CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT)) { + ret = uclass_first_device_err(UCLASS_SPI, &spi); + if (ret) + return log_msg_ret("SPI", ret); + } else { + /* Alternative code if we don't have SPI in TPL */ + if (IS_ENABLED(CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH)) + printf("Warning: Enable APL_SPI_FLASHBOOT to use SPI-flash driver in TPL"); + ret = fast_spi_cache_bios_region(); + if (ret) + return log_msg_ret("BIOS cache", ret); + } + ret = pmc_disable_tco(pmc); + if (ret) + return log_msg_ret("disable TCO", ret); + ret = pmc_gpe_init(pmc); + if (ret) + return log_msg_ret("pmc_gpe", ret); + ret = uclass_first_device_err(UCLASS_LPC, &lpc); + if (ret) + return log_msg_ret("lpc", ret); + + early_ec_init(); + + return 0; +} + +/* + * Enables several BARs and devices which are needed for memory init + * - MCH_BASE_ADDR is needed in order to talk to the memory controller + * - HPET is enabled because FSP wants to store a pointer to global data in the + * HPET comparator register + */ +static int arch_cpu_init_spl(void) +{ + struct udevice *pmc, *p2sb; + int ret; + + ret = uclass_first_device_err(UCLASS_ACPI_PMC, &pmc); + if (ret) + return log_msg_ret("Could not probe PMC", ret); + ret = uclass_first_device_err(UCLASS_P2SB, &p2sb); + if (ret) + return log_msg_ret("Cannot set up p2sb", ret); + + lpc_io_setup_comm_a_b(); + + /* TODO(sjg@chromium.org): Enable upper RTC bank here */ + + ret = pmc_init(pmc); + if (ret < 0) + return log_msg_ret("Could not init PMC", ret); +#ifdef CONFIG_HAVE_ACPI_RESUME + ret = pmc_prev_sleep_state(pmc); + if (ret < 0) + return log_msg_ret("Could not get PMC sleep state", ret); + gd->arch.prev_sleep_state = ret; +#endif + + return 0; +} + +int arch_cpu_init(void) +{ + int ret = 0; + + if (spl_phase() == PHASE_TPL) + ret = arch_cpu_init_tpl(); + else if (spl_phase() == PHASE_SPL) + ret = arch_cpu_init_spl(); + if (ret) + printf("%s: Error %d\n", __func__, ret); + + return ret; +} diff --git a/arch/x86/cpu/apollolake/fsp_m.c b/arch/x86/cpu/apollolake/fsp_m.c new file mode 100644 index 0000000..5308af8 --- /dev/null +++ b/arch/x86/cpu/apollolake/fsp_m.c @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Google LLC + * Written by Simon Glass <sjg@chromium.org> + */ + +#include <common.h> +#include <dm.h> +#include <asm/arch/iomap.h> +#include <asm/arch/fsp/fsp_configs.h> +#include <asm/arch/fsp/fsp_m_upd.h> +#include <asm/fsp2/fsp_internal.h> +#include <dm/uclass-internal.h> + +/* + * ODT settings: + * If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A and HIGH for ODT_B, + * choose ODT_A_B_HIGH_HIGH. If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A + * and LOW for ODT_B, choose ODT_A_B_HIGH_LOW. + * + * Note that the enum values correspond to the interpreted UPD fields + * within Ch[3:0]_OdtConfig parameters. + */ +enum { + ODT_A_B_HIGH_LOW = 0 << 1, + ODT_A_B_HIGH_HIGH = 1 << 1, + N_WR_24 = 1 << 5, +}; + +/* + * LPDDR4 helper routines for configuring the memory UPD for LPDDR4 operation. + * There are four physical LPDDR4 channels, each 32-bits wide. There are two + * logical channels using two physical channels together to form a 64-bit + * interface to memory for each logical channel. + */ + +enum { + LP4_PHYS_CH0A, + LP4_PHYS_CH0B, + LP4_PHYS_CH1A, + LP4_PHYS_CH1B, + + LP4_NUM_PHYS_CHANNELS, +}; + +/* + * The DQs within a physical channel can be bit-swizzled within each byte. + * Within a channel the bytes can be swapped, but the DQs need to be routed + * with the corresponding DQS (strobe). + */ +enum { + LP4_DQS0, + LP4_DQS1, + LP4_DQS2, + LP4_DQS3, + + LP4_NUM_BYTE_LANES, + DQ_BITS_PER_DQS = 8, +}; + +/* Provide bit swizzling per DQS and byte swapping within a channel */ +struct lpddr4_chan_swizzle_cfg { + u8 dqs[LP4_NUM_BYTE_LANES][DQ_BITS_PER_DQS]; +}; + +struct lpddr4_swizzle_cfg { + struct lpddr4_chan_swizzle_cfg phys[LP4_NUM_PHYS_CHANNELS]; +}; + +static void setup_sdram(struct fsp_m_config *cfg, + const struct lpddr4_swizzle_cfg *swizzle_cfg) +{ + const struct lpddr4_chan_swizzle_cfg *sch; + /* Number of bytes to copy per DQS */ + const size_t sz = DQ_BITS_PER_DQS; + int chan; + + cfg->memory_down = 1; + cfg->scrambler_support = 1; + cfg->channel_hash_mask = 0x36; + cfg->slice_hash_mask = 9; + cfg->interleaved_mode = 2; + cfg->channels_slices_enable = 0; + cfg->min_ref_rate2x_enable = 0; + cfg->dual_rank_support_enable = 1; + + /* LPDDR4 is memory down so no SPD addresses */ + cfg->dimm0_spd_address = 0; + cfg->dimm1_spd_address = 0; + + for (chan = 0; chan < 4; chan++) { + struct fsp_ram_channel *ch = &cfg->chan[chan]; + + ch->rank_enable = 1; + ch->device_width = 1; + ch->dram_density = 2; + ch->option = 3; + ch->odt_config = ODT_A_B_HIGH_HIGH; + } + + /* + * CH0_DQB byte lanes in the bit swizzle configuration field are + * not 1:1. The mapping within the swizzling field is: + * indices [0:7] - byte lane 1 (DQS1) DQ[8:15] + * indices [8:15] - byte lane 0 (DQS0) DQ[0:7] + * indices [16:23] - byte lane 3 (DQS3) DQ[24:31] + * indices [24:31] - byte lane 2 (DQS2) DQ[16:23] + */ + sch = &swizzle_cfg->phys[LP4_PHYS_CH0B]; + memcpy(&cfg->ch_bit_swizzling[0][0], &sch->dqs[LP4_DQS1], sz); + memcpy(&cfg->ch_bit_swizzling[0][8], &sch->dqs[LP4_DQS0], sz); + memcpy(&cfg->ch_bit_swizzling[0][16], &sch->dqs[LP4_DQS3], sz); + memcpy(&cfg->ch_bit_swizzling[0][24], &sch->dqs[LP4_DQS2], sz); + + /* + * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1. + */ + sch = &swizzle_cfg->phys[LP4_PHYS_CH0A]; + memcpy(&cfg->ch_bit_swizzling[1][0], &sch->dqs[LP4_DQS0], sz); + memcpy(&cfg->ch_bit_swizzling[1][8], &sch->dqs[LP4_DQS1], sz); + memcpy(&cfg->ch_bit_swizzling[1][16], &sch->dqs[LP4_DQS2], sz); + memcpy(&cfg->ch_bit_swizzling[1][24], &sch->dqs[LP4_DQS3], sz); + + sch = &swizzle_cfg->phys[LP4_PHYS_CH1B]; + memcpy(&cfg->ch_bit_swizzling[2][0], &sch->dqs[LP4_DQS1], sz); + memcpy(&cfg->ch_bit_swizzling[2][8], &sch->dqs[LP4_DQS0], sz); + memcpy(&cfg->ch_bit_swizzling[2][16], &sch->dqs[LP4_DQS3], sz); + memcpy(&cfg->ch_bit_swizzling[2][24], &sch->dqs[LP4_DQS2], sz); + + /* + * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1. + */ + sch = &swizzle_cfg->phys[LP4_PHYS_CH1A]; + memcpy(&cfg->ch_bit_swizzling[3][0], &sch->dqs[LP4_DQS0], sz); + memcpy(&cfg->ch_bit_swizzling[3][8], &sch->dqs[LP4_DQS1], sz); + memcpy(&cfg->ch_bit_swizzling[3][16], &sch->dqs[LP4_DQS2], sz); + memcpy(&cfg->ch_bit_swizzling[3][24], &sch->dqs[LP4_DQS3], sz); +} + +int fspm_update_config(struct udevice *dev, struct fspm_upd *upd) +{ + struct fsp_m_config *cfg = &upd->config; + struct fspm_arch_upd *arch = &upd->arch; + + arch->nvs_buffer_ptr = NULL; + prepare_mrc_cache(upd); + arch->stack_base = (void *)0xfef96000; + arch->boot_loader_tolum_size = 0; + + arch->boot_mode = FSP_BOOT_WITH_FULL_CONFIGURATION; + cfg->serial_debug_port_type = 2; + cfg->serial_debug_port_device = 2; + cfg->serial_debug_port_stride_size = 2; + cfg->serial_debug_port_address = 0; + + cfg->package = 1; + /* Don't enforce a memory size limit */ + cfg->memory_size_limit = 0; + cfg->low_memory_max_value = 2048; /* 2 GB */ + /* No restrictions on memory above 4GiB */ + cfg->high_memory_max_value = 0; + + /* Always default to attempt to use saved training data */ + cfg->disable_fast_boot = 0; + + const u8 *swizzle_data; + + swizzle_data = dev_read_u8_array_ptr(dev, "lpddr4-swizzle", + LP4_NUM_BYTE_LANES * + DQ_BITS_PER_DQS * + LP4_NUM_PHYS_CHANNELS); + if (!swizzle_data) + return log_msg_ret("Cannot read swizzel data", -EINVAL); + + setup_sdram(cfg, (struct lpddr4_swizzle_cfg *)swizzle_data); + + cfg->pre_mem_gpio_table_ptr = 0; + + cfg->profile = 0xb; + cfg->msg_level_mask = 0; + + /* other */ + cfg->skip_cse_rbp = 1; + cfg->periodic_retraining_disable = 0; + cfg->enable_s3_heci2 = 0; + + return 0; +} + +/* + * The FSP-M binary appears to break the SPI controller. It can be fixed by + * writing the BAR again, so do that here + */ +int fspm_done(struct udevice *dev) +{ + struct udevice *spi; + int ret; + + /* Don't probe the device, since that reads the BAR */ + ret = uclass_find_first_device(UCLASS_SPI, &spi); + if (ret) + return log_msg_ret("SPI", ret); + if (!spi) + return log_msg_ret("no SPI", -ENODEV); + + dm_pci_write_config32(spi, PCI_BASE_ADDRESS_0, + IOMAP_SPI_BASE | PCI_BASE_ADDRESS_SPACE_MEMORY); + + return 0; +} diff --git a/arch/x86/cpu/apollolake/fsp_s.c b/arch/x86/cpu/apollolake/fsp_s.c new file mode 100644 index 0000000..9804227 --- /dev/null +++ b/arch/x86/cpu/apollolake/fsp_s.c @@ -0,0 +1,661 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Google LLC + * Written by Simon Glass <sjg@chromium.org> + */ + +#include <common.h> +#include <acpi_s3.h> +#include <binman.h> +#include <dm.h> +#include <irq.h> +#include <asm/intel_pinctrl.h> +#include <asm/io.h> +#include <asm/intel_regs.h> +#include <asm/msr.h> +#include <asm/msr-index.h> +#include <asm/pci.h> +#include <asm/arch/cpu.h> +#include <asm/arch/systemagent.h> +#include <asm/arch/fsp/fsp_configs.h> +#include <asm/arch/fsp/fsp_s_upd.h> + +#define PCH_P2SB_E0 0xe0 +#define HIDE_BIT BIT(0) + +#define INTEL_GSPI_MAX 3 +#define INTEL_I2C_DEV_MAX 8 +#define MAX_USB2_PORTS 8 + +enum { + CHIPSET_LOCKDOWN_FSP = 0, /* FSP handles locking per UPDs */ + CHIPSET_LOCKDOWN_COREBOOT, /* coreboot handles locking */ +}; + +enum i2c_speed { + I2C_SPEED_STANDARD = 100000, + I2C_SPEED_FAST = 400000, + I2C_SPEED_FAST_PLUS = 1000000, + I2C_SPEED_HIGH = 3400000, + I2C_SPEED_FAST_ULTRA = 5000000, +}; + +/* + * Timing values are in units of clock period, with the clock speed + * provided by the SOC + * + * TODO(sjg@chromium.org): Connect this up to the I2C driver + */ +struct dw_i2c_speed_config { + enum i2c_speed speed; + /* SCL high and low period count */ + u16 scl_lcnt; + u16 scl_hcnt; + /* + * SDA hold time should be 300ns in standard and fast modes + * and long enough for deterministic logic level change in + * fast-plus and high speed modes. + * + * [15:0] SDA TX Hold Time + * [23:16] SDA RX Hold Time + */ + u32 sda_hold; +}; + +/* Serial IRQ control. SERIRQ_QUIET is the default (0) */ +enum serirq_mode { + SERIRQ_QUIET, + SERIRQ_CONTINUOUS, + SERIRQ_OFF, +}; + +/* + * This I2C controller has support for 3 independent speed configs but can + * support both FAST_PLUS and HIGH speeds through the same set of speed + * config registers. These are treated separately so the speed config values + * can be provided via ACPI to the OS. + */ +#define DW_I2C_SPEED_CONFIG_COUNT 4 + +struct dw_i2c_bus_config { + /* Bus should be enabled in TPL with temporary base */ + int early_init; + /* Bus speed in Hz, default is I2C_SPEED_FAST (400 KHz) */ + enum i2c_speed speed; + /* + * If rise_time_ns is non-zero the calculations for lcnt and hcnt + * registers take into account the times of the bus. However, if + * there is a match in speed_config those register values take + * precedence + */ + int rise_time_ns; + int fall_time_ns; + int data_hold_time_ns; + /* Specific bus speed configuration */ + struct dw_i2c_speed_config speed_config[DW_I2C_SPEED_CONFIG_COUNT]; +}; + +struct gspi_cfg { + /* Bus speed in MHz */ + u32 speed_mhz; + /* Bus should be enabled prior to ramstage with temporary base */ + u8 early_init; +}; + +/* + * This structure will hold data required by common blocks. + * These are soc specific configurations which will be filled by soc. + * We'll fill this structure once during init and use the data in common block. + */ +struct soc_intel_common_config { + int chipset_lockdown; + struct gspi_cfg gspi[INTEL_GSPI_MAX]; + struct dw_i2c_bus_config i2c[INTEL_I2C_DEV_MAX]; +}; + +enum pnp_settings { + PNP_PERF, + PNP_POWER, + PNP_PERF_POWER, +}; + +struct usb2_eye_per_port { + u8 per_port_tx_pe_half; + u8 per_port_pe_txi_set; + u8 per_port_txi_set; + u8 hs_skew_sel; + u8 usb_tx_emphasis_en; + u8 per_port_rxi_set; + u8 hs_npre_drv_sel; + u8 override_en; +}; + +struct apl_config { + /* Common structure containing soc config data required by common code*/ + struct soc_intel_common_config common_soc_config; + + /* + * Mapping from PCIe root port to CLKREQ input on the SOC. The SOC has + * four CLKREQ inputs, but six root ports. Root ports without an + * associated CLKREQ signal must be marked with "CLKREQ_DISABLED" + */ + u8 pcie_rp_clkreq_pin[MAX_PCIE_PORTS]; + + /* Enable/disable hot-plug for root ports (0 = disable, 1 = enable) */ + u8 pcie_rp_hotplug_enable[MAX_PCIE_PORTS]; + + /* De-emphasis enable configuration for each PCIe root port */ + u8 pcie_rp_deemphasis_enable[MAX_PCIE_PORTS]; + + /* + * [14:8] DDR mode Number of dealy elements.Each = 125pSec. + * [6:0] SDR mode Number of dealy elements.Each = 125pSec. + */ + u32 emmc_tx_cmd_cntl; + + /* + * [14:8] HS400 mode Number of dealy elements.Each = 125pSec. + * [6:0] SDR104/HS200 mode Number of dealy elements.Each = 125pSec. + */ + u32 emmc_tx_data_cntl1; + + /* + * [30:24] SDR50 mode Number of dealy elements.Each = 125pSec. + * [22:16] DDR50 mode Number of dealy elements.Each = 125pSec. + * [14:8] SDR25/HS50 mode Number of dealy elements.Each = 125pSec. + * [6:0] SDR12/Compatibility mode Number of dealy elements. + * Each = 125pSec. + */ + u32 emmc_tx_data_cntl2; + + /* + * [30:24] SDR50 mode Number of dealy elements.Each = 125pSec. + * [22:16] DDR50 mode Number of dealy elements.Each = 125pSec. + * [14:8] SDR25/HS50 mode Number of dealy elements.Each = 125pSec. + * [6:0] SDR12/Compatibility mode Number of dealy elements. + * Each = 125pSec. + */ + u32 emmc_rx_cmd_data_cntl1; + + /* + * [14:8] HS400 mode 1 Number of dealy elements.Each = 125pSec. + * [6:0] HS400 mode 2 Number of dealy elements.Each = 125pSec. + */ + u32 emmc_rx_strobe_cntl; + + /* + * [13:8] Auto Tuning mode Number of dealy elements.Each = 125pSec. + * [6:0] SDR104/HS200 Number of dealy elements.Each = 125pSec. + */ + u32 emmc_rx_cmd_data_cntl2; + + /* Select the eMMC max speed allowed */ + u32 emmc_host_max_speed; + + /* Specifies on which IRQ the SCI will internally appear */ + u32 sci_irq; + + /* Configure serial IRQ (SERIRQ) line */ + enum serirq_mode serirq_mode; + + /* Configure LPSS S0ix Enable */ + bool lpss_s0ix_enable; + + /* Enable DPTF support */ + bool dptf_enable; + + /* TCC activation offset value in degrees Celsius */ + int tcc_offset; + + /* + * Configure Audio clk gate and power gate + * IOSF-SB port ID 92 offset 0x530 [5] and [3] + */ + bool hdaudio_clk_gate_enable; + bool hdaudio_pwr_gate_enable; + bool hdaudio_bios_config_lockdown; + + /* SLP S3 minimum assertion width */ + int slp_s3_assertion_width_usecs; + + /* GPIO pin for PERST_0 */ + u32 prt0_gpio; + + /* USB2 eye diagram settings per port */ + struct usb2_eye_per_port usb2eye[MAX_USB2_PORTS]; + + /* GPIO SD card detect pin */ + unsigned int sdcard_cd_gpio; + + /* + * PRMRR size setting with three options + * 0x02000000 - 32MiB + * 0x04000000 - 64MiB + * 0x08000000 - 128MiB + */ + u32 PrmrrSize; + + /* + * Enable SGX feature. + * Enabling SGX feature is 2 step process, + * (1) set sgx_enable = 1 + * (2) set PrmrrSize to supported size + */ + bool sgx_enable; + + /* + * Select PNP Settings. + * (0) Performance, + * (1) Power + * (2) Power & Performance + */ + enum pnp_settings pnp_settings; + + /* + * PMIC PCH_PWROK delay configuration - IPC Configuration + * Upd for changing PCH_PWROK delay configuration : I2C_Slave_Address + * (31:24) + Register_Offset (23:16) + OR Value (15:8) + AND Value (7:0) + */ + u32 pmic_pmc_ipc_ctrl; + + /* + * Options to disable XHCI Link Compliance Mode. Default is FALSE to not + * disable Compliance Mode. Set TRUE to disable Compliance Mode. + * 0:FALSE(Default), 1:True. + */ + bool disable_compliance_mode; + + /* + * Options to change USB3 ModPhy setting for the Integrated Filter (IF) + * value. Default is 0 to not changing default IF value (0x12). Set + * value with the range from 0x01 to 0xff to change IF value. + */ + u32 mod_phy_if_value; + + /* + * Options to bump USB3 LDO voltage. Default is FALSE to not increasing + * LDO voltage. Set TRUE to increase LDO voltage with 40mV. + * 0:FALSE (default), 1:True. + */ + bool mod_phy_voltage_bump; + + /* + * Options to adjust PMIC Vdd2 voltage. Default is 0 to not adjusting + * the PMIC Vdd2 default voltage 1.20v. Upd for changing Vdd2 Voltage + * configuration: I2C_Slave_Address (31:23) + Register_Offset (23:16) + * + OR Value (15:8) + AND Value (7:0) through BUCK5_VID[3:2]: + * 00=1.10v, 01=1.15v, 10=1.24v, 11=1.20v (default). + */ + u32 pmic_vdd2_voltage; + + /* Option to enable VTD feature */ + bool enable_vtd; +}; + +static int get_config(struct udevice *dev, struct apl_config *apl) +{ + const u8 *ptr; + ofnode node; + u32 emmc[4]; + int ret; + + memset(apl, '\0', sizeof(*apl)); + + node = dev_read_subnode(dev, "fsp-s"); + if (!ofnode_valid(node)) + return log_msg_ret("fsp-s settings", -ENOENT); + + ptr = ofnode_read_u8_array_ptr(node, "pcie-rp-clkreq-pin", + MAX_PCIE_PORTS); + if (!ptr) + return log_msg_ret("pcie-rp-clkreq-pin", -EINVAL); + memcpy(apl->pcie_rp_clkreq_pin, ptr, MAX_PCIE_PORTS); + + ret = ofnode_read_u32(node, "prt0-gpio", &apl->prt0_gpio); + if (ret) + return log_msg_ret("prt0-gpio", ret); + ret = ofnode_read_u32(node, "sdcard-cd-gpio", &apl->sdcard_cd_gpio); + if (ret) + return log_msg_ret("sdcard-cd-gpio", ret); + + ret = ofnode_read_u32_array(node, "emmc", emmc, ARRAY_SIZE(emmc)); + if (ret) + return log_msg_ret("emmc", ret); + apl->emmc_tx_data_cntl1 = emmc[0]; + apl->emmc_tx_data_cntl2 = emmc[1]; + apl->emmc_rx_cmd_data_cntl1 = emmc[2]; + apl->emmc_rx_cmd_data_cntl2 = emmc[3]; + + apl->dptf_enable = ofnode_read_bool(node, "dptf-enable"); + + apl->hdaudio_clk_gate_enable = ofnode_read_bool(node, + "hdaudio-clk-gate-enable"); + apl->hdaudio_pwr_gate_enable = ofnode_read_bool(node, + "hdaudio-pwr-gate-enable"); + apl->hdaudio_bios_config_lockdown = ofnode_read_bool(node, + "hdaudio-bios-config-lockdown"); + apl->lpss_s0ix_enable = ofnode_read_bool(node, "lpss-s0ix-enable"); + + /* Santa */ + apl->usb2eye[1].per_port_pe_txi_set = 7; + apl->usb2eye[1].per_port_txi_set = 2; + + return 0; +} + +static void apl_fsp_silicon_init_params_cb(struct apl_config *apl, + struct fsp_s_config *cfg) +{ + u8 port; + + for (port = 0; port < MAX_USB2_PORTS; port++) { + if (apl->usb2eye[port].per_port_tx_pe_half) + cfg->port_usb20_per_port_tx_pe_half[port] = + apl->usb2eye[port].per_port_tx_pe_half; + + if (apl->usb2eye[port].per_port_pe_txi_set) + cfg->port_usb20_per_port_pe_txi_set[port] = + apl->usb2eye[port].per_port_pe_txi_set; + + if (apl->usb2eye[port].per_port_txi_set) + cfg->port_usb20_per_port_txi_set[port] = + apl->usb2eye[port].per_port_txi_set; + + if (apl->usb2eye[port].hs_skew_sel) + cfg->port_usb20_hs_skew_sel[port] = + apl->usb2eye[port].hs_skew_sel; + + if (apl->usb2eye[port].usb_tx_emphasis_en) + cfg->port_usb20_i_usb_tx_emphasis_en[port] = + apl->usb2eye[port].usb_tx_emphasis_en; + + if (apl->usb2eye[port].per_port_rxi_set) + cfg->port_usb20_per_port_rxi_set[port] = + apl->usb2eye[port].per_port_rxi_set; + + if (apl->usb2eye[port].hs_npre_drv_sel) + cfg->port_usb20_hs_npre_drv_sel[port] = + apl->usb2eye[port].hs_npre_drv_sel; + } +} + +int fsps_update_config(struct udevice *dev, ulong rom_offset, + struct fsps_upd *upd) +{ + struct fsp_s_config *cfg = &upd->config; + struct apl_config *apl; + struct binman_entry vbt; + void *buf; + int ret; + + ret = binman_entry_find("intel-vbt", &vbt); + if (ret) + return log_msg_ret("Cannot find VBT", ret); + vbt.image_pos += rom_offset; + buf = malloc(vbt.size); + if (!buf) + return log_msg_ret("Alloc VBT", -ENOMEM); + + /* + * Load VBT before devicetree-specific config. This only supports + * memory-mapped SPI at present. + */ + bootstage_start(BOOTSTAGE_ID_ACCUM_MMAP_SPI, "mmap_spi"); + memcpy(buf, (void *)vbt.image_pos, vbt.size); + bootstage_accum(BOOTSTAGE_ID_ACCUM_MMAP_SPI); + if (*(u32 *)buf != VBT_SIGNATURE) + return log_msg_ret("VBT signature", -EINVAL); + cfg->graphics_config_ptr = (ulong)buf; + + apl = malloc(sizeof(*apl)); + if (!apl) + return log_msg_ret("config", -ENOMEM); + get_config(dev, apl); + + cfg->ish_enable = 0; + cfg->enable_sata = 0; + cfg->pcie_root_port_en[2] = 0; + cfg->pcie_rp_hot_plug[2] = 0; + cfg->pcie_root_port_en[3] = 0; + cfg->pcie_rp_hot_plug[3] = 0; + cfg->pcie_root_port_en[4] = 0; + cfg->pcie_rp_hot_plug[4] = 0; + cfg->pcie_root_port_en[5] = 0; + cfg->pcie_rp_hot_plug[5] = 0; + cfg->pcie_root_port_en[1] = 0; + cfg->pcie_rp_hot_plug[1] = 0; + cfg->usb_otg = 0; + cfg->i2c6_enable = 0; + cfg->i2c7_enable = 0; + cfg->hsuart3_enable = 0; + cfg->spi1_enable = 0; + cfg->spi2_enable = 0; + cfg->sdio_enabled = 0; + + memcpy(cfg->pcie_rp_clk_req_number, apl->pcie_rp_clkreq_pin, + sizeof(cfg->pcie_rp_clk_req_number)); + + memcpy(cfg->pcie_rp_hot_plug, apl->pcie_rp_hotplug_enable, + sizeof(cfg->pcie_rp_hot_plug)); + + switch (apl->serirq_mode) { + case SERIRQ_QUIET: + cfg->sirq_enable = 1; + cfg->sirq_mode = 0; + break; + case SERIRQ_CONTINUOUS: + cfg->sirq_enable = 1; + cfg->sirq_mode = 1; + break; + case SERIRQ_OFF: + default: + cfg->sirq_enable = 0; + break; + } + + if (apl->emmc_tx_cmd_cntl) + cfg->emmc_tx_cmd_cntl = apl->emmc_tx_cmd_cntl; + if (apl->emmc_tx_data_cntl1) + cfg->emmc_tx_data_cntl1 = apl->emmc_tx_data_cntl1; + if (apl->emmc_tx_data_cntl2) + cfg->emmc_tx_data_cntl2 = apl->emmc_tx_data_cntl2; + if (apl->emmc_rx_cmd_data_cntl1) + cfg->emmc_rx_cmd_data_cntl1 = apl->emmc_rx_cmd_data_cntl1; + if (apl->emmc_rx_strobe_cntl) + cfg->emmc_rx_strobe_cntl = apl->emmc_rx_strobe_cntl; + if (apl->emmc_rx_cmd_data_cntl2) + cfg->emmc_rx_cmd_data_cntl2 = apl->emmc_rx_cmd_data_cntl2; + if (apl->emmc_host_max_speed) + cfg->e_mmc_host_max_speed = apl->emmc_host_max_speed; + + cfg->lpss_s0ix_enable = apl->lpss_s0ix_enable; + + cfg->skip_mp_init = true; + + /* Disable setting of EISS bit in FSP */ + cfg->spi_eiss = 0; + + /* Disable FSP from locking access to the RTC NVRAM */ + cfg->rtc_lock = 0; + + /* Enable Audio clk gate and power gate */ + cfg->hd_audio_clk_gate = apl->hdaudio_clk_gate_enable; + cfg->hd_audio_pwr_gate = apl->hdaudio_pwr_gate_enable; + /* Bios config lockdown Audio clk and power gate */ + cfg->bios_cfg_lock_down = apl->hdaudio_bios_config_lockdown; + apl_fsp_silicon_init_params_cb(apl, cfg); + + cfg->usb_otg = true; + cfg->vtd_enable = apl->enable_vtd; + + return 0; +} + +static void p2sb_set_hide_bit(pci_dev_t dev, int hide) +{ + pci_x86_clrset_config(dev, PCH_P2SB_E0 + 1, HIDE_BIT, + hide ? HIDE_BIT : 0, PCI_SIZE_8); +} + +/* Configure package power limits */ +static int set_power_limits(struct udevice *dev) +{ + msr_t rapl_msr_reg, limit; + u32 power_unit; + u32 tdp, min_power, max_power; + u32 pl2_val; + u32 override_tdp[2]; + int ret; + + /* Get units */ + rapl_msr_reg = msr_read(MSR_PKG_POWER_SKU_UNIT); + power_unit = 1 << (rapl_msr_reg.lo & 0xf); + + /* Get power defaults for this SKU */ + rapl_msr_reg = msr_read(MSR_PKG_POWER_SKU); + tdp = rapl_msr_reg.lo & PKG_POWER_LIMIT_MASK; + pl2_val = rapl_msr_reg.hi & PKG_POWER_LIMIT_MASK; + min_power = (rapl_msr_reg.lo >> 16) & PKG_POWER_LIMIT_MASK; + max_power = rapl_msr_reg.hi & PKG_POWER_LIMIT_MASK; + + if (min_power > 0 && tdp < min_power) + tdp = min_power; + + if (max_power > 0 && tdp > max_power) + tdp = max_power; + + ret = dev_read_u32_array(dev, "tdp-pl-override-mw", override_tdp, + ARRAY_SIZE(override_tdp)); + if (ret) + return log_msg_ret("tdp-pl-override-mw", ret); + + /* Set PL1 override value */ + if (override_tdp[0]) + tdp = override_tdp[0] * power_unit / 1000; + + /* Set PL2 override value */ + if (override_tdp[1]) + pl2_val = override_tdp[1] * power_unit / 1000; + + /* Set long term power limit to TDP */ + limit.lo = tdp & PKG_POWER_LIMIT_MASK; + /* Set PL1 Pkg Power clamp bit */ + limit.lo |= PKG_POWER_LIMIT_CLAMP; + + limit.lo |= PKG_POWER_LIMIT_EN; + limit.lo |= (MB_POWER_LIMIT1_TIME_DEFAULT & + PKG_POWER_LIMIT_TIME_MASK) << PKG_POWER_LIMIT_TIME_SHIFT; + + /* Set short term power limit PL2 */ + limit.hi = pl2_val & PKG_POWER_LIMIT_MASK; + limit.hi |= PKG_POWER_LIMIT_EN; + + /* Program package power limits in RAPL MSR */ + msr_write(MSR_PKG_POWER_LIMIT, limit); + log_info("RAPL PL1 %d.%dW\n", tdp / power_unit, + 100 * (tdp % power_unit) / power_unit); + log_info("RAPL PL2 %d.%dW\n", pl2_val / power_unit, + 100 * (pl2_val % power_unit) / power_unit); + + /* + * Sett RAPL MMIO register for Power limits. RAPL driver is using MSR + * instead of MMIO, so disable LIMIT_EN bit for MMIO + */ + writel(limit.lo & ~PKG_POWER_LIMIT_EN, MCHBAR_REG(MCHBAR_RAPL_PPL)); + writel(limit.hi & ~PKG_POWER_LIMIT_EN, MCHBAR_REG(MCHBAR_RAPL_PPL + 4)); + + return 0; +} + +int p2sb_unhide(void) +{ + pci_dev_t dev = PCI_BDF(0, 0xd, 0); + ulong val; + + p2sb_set_hide_bit(dev, 0); + + pci_x86_read_config(dev, PCI_VENDOR_ID, &val, PCI_SIZE_16); + + if (val != PCI_VENDOR_ID_INTEL) + return log_msg_ret("p2sb unhide", -EIO); + + return 0; +} + +/* Overwrites the SCI IRQ if another IRQ number is given by device tree */ +static void set_sci_irq(void) +{ + /* Skip this for now */ +} + +int arch_fsps_preinit(void) +{ + struct udevice *itss; + int ret; + + ret = uclass_first_device_err(UCLASS_IRQ, &itss); + if (ret) + return log_msg_ret("no itss", ret); + /* + * Snapshot the current GPIO IRQ polarities. FSP is setting a default + * policy that doesn't honour boards' requirements + */ + irq_snapshot_polarities(itss); + + /* + * Clear the GPI interrupt status and enable registers. These + * registers do not get reset to default state when booting from S5. + */ + ret = pinctrl_gpi_clear_int_cfg(); + if (ret) + return log_msg_ret("gpi_clear", ret); + + return 0; +} + +int arch_fsp_init_r(void) +{ +#ifdef CONFIG_HAVE_ACPI_RESUME + bool s3wake = gd->arch.prev_sleep_state == ACPI_S3; +#else + bool s3wake = false; +#endif + struct udevice *dev, *itss; + int ret; + + /* + * This must be called before any devices are probed. Put any probing + * into arch_fsps_preinit() above. + * + * We don't use CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH here since it will + * force PCI to be probed. + */ + ret = fsp_silicon_init(s3wake, false); + if (ret) + return ret; + + ret = uclass_first_device_err(UCLASS_IRQ, &itss); + if (ret) + return log_msg_ret("no itss", ret); + /* Restore GPIO IRQ polarities back to previous settings */ + irq_restore_polarities(itss); + + /* soc_init() */ + ret = p2sb_unhide(); + if (ret) + return log_msg_ret("unhide p2sb", ret); + + /* Set RAPL MSR for Package power limits*/ + ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &dev); + if (ret) + return log_msg_ret("Cannot get northbridge", ret); + set_power_limits(dev); + + /* + * FSP-S routes SCI to IRQ 9. With the help of this function you can + * select another IRQ for SCI. + */ + set_sci_irq(); + + return 0; +} diff --git a/arch/x86/cpu/apollolake/hostbridge.c b/arch/x86/cpu/apollolake/hostbridge.c new file mode 100644 index 0000000..793853d --- /dev/null +++ b/arch/x86/cpu/apollolake/hostbridge.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + */ + +#include <common.h> +#include <dm.h> +#include <dt-structs.h> +#include <spl.h> +#include <asm/intel_pinctrl.h> +#include <asm/intel_regs.h> +#include <asm/pci.h> +#include <asm/arch/systemagent.h> + +/** + * struct apl_hostbridge_platdata - platform data for hostbridge + * + * @dtplat: Platform data for of-platdata + * @early_pads: Early pad data to set up, each (pad, cfg0, cfg1) + * @early_pads_count: Number of pads to process + * @pciex_region_size: BAR length in bytes + * @bdf: Bus/device/function of hostbridge + */ +struct apl_hostbridge_platdata { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_intel_apl_hostbridge dtplat; +#endif + u32 *early_pads; + int early_pads_count; + uint pciex_region_size; + pci_dev_t bdf; +}; + +enum { + PCIEXBAR = 0x60, + PCIEXBAR_LENGTH_256MB = 0, + PCIEXBAR_LENGTH_128MB, + PCIEXBAR_LENGTH_64MB, + + PCIEXBAR_PCIEXBAREN = 1 << 0, + + TSEG = 0xb8, /* TSEG base */ +}; + +static int apl_hostbridge_early_init_pinctrl(struct udevice *dev) +{ + struct apl_hostbridge_platdata *plat = dev_get_platdata(dev); + struct udevice *pinctrl; + int ret; + + ret = uclass_first_device_err(UCLASS_PINCTRL, &pinctrl); + if (ret) + return log_msg_ret("no hostbridge pinctrl", ret); + + return pinctrl_config_pads(pinctrl, plat->early_pads, + plat->early_pads_count); +} + +static int apl_hostbridge_early_init(struct udevice *dev) +{ + struct apl_hostbridge_platdata *plat = dev_get_platdata(dev); + u32 region_size; + ulong base; + u32 reg; + int ret; + + /* Set up the MCHBAR */ + pci_x86_read_config(plat->bdf, MCHBAR, &base, PCI_SIZE_32); + base = MCH_BASE_ADDRESS; + pci_x86_write_config(plat->bdf, MCHBAR, base | 1, PCI_SIZE_32); + + /* + * The PCIEXBAR is assumed to live in the memory mapped IO space under + * 4GiB + */ + pci_x86_write_config(plat->bdf, PCIEXBAR + 4, 0, PCI_SIZE_32); + + switch (plat->pciex_region_size >> 20) { + default: + case 256: + region_size = PCIEXBAR_LENGTH_256MB; + break; + case 128: + region_size = PCIEXBAR_LENGTH_128MB; + break; + case 64: + region_size = PCIEXBAR_LENGTH_64MB; + break; + } + + reg = CONFIG_MMCONF_BASE_ADDRESS | (region_size << 1) + | PCIEXBAR_PCIEXBAREN; + pci_x86_write_config(plat->bdf, PCIEXBAR, reg, PCI_SIZE_32); + + /* + * TSEG defines the base of SMM range. BIOS determines the base + * of TSEG memory which must be at or below Graphics base of GTT + * Stolen memory, hence its better to clear TSEG register early + * to avoid power on default non-zero value (if any). + */ + pci_x86_write_config(plat->bdf, TSEG, 0, PCI_SIZE_32); + + ret = apl_hostbridge_early_init_pinctrl(dev); + if (ret) + return log_msg_ret("pinctrl", ret); + + return 0; +} + +static int apl_hostbridge_ofdata_to_platdata(struct udevice *dev) +{ + struct apl_hostbridge_platdata *plat = dev_get_platdata(dev); + struct udevice *pinctrl; + int ret; + + /* + * The host bridge holds the early pad data needed to get through TPL. + * This is a small amount of data, enough to fit in TPL, so we keep it + * separate from the full pad data, stored in the fsp-s subnode. That + * subnode is not present in TPL, to save space. + */ + ret = uclass_first_device_err(UCLASS_PINCTRL, &pinctrl); + if (ret) + return log_msg_ret("no hostbridge PINCTRL", ret); +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + int root; + + /* Get length of PCI Express Region */ + plat->pciex_region_size = dev_read_u32_default(dev, "pciex-region-size", + 256 << 20); + + root = pci_get_devfn(dev); + if (root < 0) + return log_msg_ret("Cannot get host-bridge PCI address", root); + plat->bdf = root; + + ret = pinctrl_read_pads(pinctrl, dev_ofnode(dev), "early-pads", + &plat->early_pads, &plat->early_pads_count); + if (ret) + return log_msg_ret("early-pads", ret); +#else + struct dtd_intel_apl_hostbridge *dtplat = &plat->dtplat; + int size; + + plat->pciex_region_size = dtplat->pciex_region_size; + plat->bdf = pci_ofplat_get_devfn(dtplat->reg[0]); + + /* Assume that if everything is 0, it is empty */ + plat->early_pads = dtplat->early_pads; + size = ARRAY_SIZE(dtplat->early_pads); + plat->early_pads_count = pinctrl_count_pads(pinctrl, plat->early_pads, + size); + +#endif + + return 0; +} + +static int apl_hostbridge_probe(struct udevice *dev) +{ + if (spl_phase() == PHASE_TPL) + return apl_hostbridge_early_init(dev); + + return 0; +} + +static const struct udevice_id apl_hostbridge_ids[] = { + { .compatible = "intel,apl-hostbridge" }, + { } +}; + +U_BOOT_DRIVER(apl_hostbridge_drv) = { + .name = "intel_apl_hostbridge", + .id = UCLASS_NORTHBRIDGE, + .of_match = apl_hostbridge_ids, + .ofdata_to_platdata = apl_hostbridge_ofdata_to_platdata, + .probe = apl_hostbridge_probe, + .platdata_auto_alloc_size = sizeof(struct apl_hostbridge_platdata), +}; diff --git a/arch/x86/cpu/apollolake/itss.c b/arch/x86/cpu/apollolake/itss.c new file mode 100644 index 0000000..8789f8e --- /dev/null +++ b/arch/x86/cpu/apollolake/itss.c @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Something to do with Interrupts, but I don't know what ITSS stands for + * + * Copyright (C) 2017 Intel Corporation. + * Copyright (C) 2017 Siemens AG + * Copyright 2019 Google LLC + * + * Taken from coreboot itss.c + */ + +#include <common.h> +#include <dm.h> +#include <dt-structs.h> +#include <irq.h> +#include <p2sb.h> +#include <spl.h> +#include <asm/arch/itss.h> + +struct apl_itss_platdata { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + /* Put this first since driver model will copy the data here */ + struct dtd_intel_apl_itss dtplat; +#endif +}; + +/* struct pmc_route - Routing for PMC to GPIO */ +struct pmc_route { + u32 pmc; + u32 gpio; +}; + +struct apl_itss_priv { + struct pmc_route *route; + uint route_count; + u32 irq_snapshot[NUM_IPC_REGS]; +}; + +static int apl_set_polarity(struct udevice *dev, uint irq, bool active_low) +{ + u32 mask; + uint reg; + + if (irq > ITSS_MAX_IRQ) + return -EINVAL; + + reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * (irq / IRQS_PER_IPC); + mask = 1 << (irq % IRQS_PER_IPC); + + pcr_clrsetbits32(dev, reg, mask, active_low ? mask : 0); + + return 0; +} + +#ifndef CONFIG_TPL_BUILD +static int apl_snapshot_polarities(struct udevice *dev) +{ + struct apl_itss_priv *priv = dev_get_priv(dev); + const int start = GPIO_IRQ_START; + const int end = GPIO_IRQ_END; + int reg_start; + int reg_end; + int i; + + reg_start = start / IRQS_PER_IPC; + reg_end = (end + IRQS_PER_IPC - 1) / IRQS_PER_IPC; + + for (i = reg_start; i < reg_end; i++) { + uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i; + + priv->irq_snapshot[i] = pcr_read32(dev, reg); + } + + return 0; +} + +static void show_polarities(struct udevice *dev, const char *msg) +{ + int i; + + log_info("ITSS IRQ Polarities %s:\n", msg); + for (i = 0; i < NUM_IPC_REGS; i++) { + uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i; + + log_info("IPC%d: 0x%08x\n", i, pcr_read32(dev, reg)); + } +} + +static int apl_restore_polarities(struct udevice *dev) +{ + struct apl_itss_priv *priv = dev_get_priv(dev); + const int start = GPIO_IRQ_START; + const int end = GPIO_IRQ_END; + int reg_start; + int reg_end; + int i; + + show_polarities(dev, "Before"); + + reg_start = start / IRQS_PER_IPC; + reg_end = (end + IRQS_PER_IPC - 1) / IRQS_PER_IPC; + + for (i = reg_start; i < reg_end; i++) { + u32 mask; + u16 reg; + int irq_start; + int irq_end; + + irq_start = i * IRQS_PER_IPC; + irq_end = min(irq_start + IRQS_PER_IPC - 1, ITSS_MAX_IRQ); + + if (start > irq_end) + continue; + if (end < irq_start) + break; + + /* Track bits within the bounds of of the register */ + irq_start = max(start, irq_start) % IRQS_PER_IPC; + irq_end = min(end, irq_end) % IRQS_PER_IPC; + + /* Create bitmask of the inclusive range of start and end */ + mask = (((1U << irq_end) - 1) | (1U << irq_end)); + mask &= ~((1U << irq_start) - 1); + + reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i; + pcr_clrsetbits32(dev, reg, mask, mask & priv->irq_snapshot[i]); + } + + show_polarities(dev, "After"); + + return 0; +} +#endif + +static int apl_route_pmc_gpio_gpe(struct udevice *dev, uint pmc_gpe_num) +{ + struct apl_itss_priv *priv = dev_get_priv(dev); + struct pmc_route *route; + int i; + + for (i = 0, route = priv->route; i < priv->route_count; i++, route++) { + if (pmc_gpe_num == route->pmc) + return route->gpio; + } + + return -ENOENT; +} + +static int apl_itss_ofdata_to_platdata(struct udevice *dev) +{ + struct apl_itss_priv *priv = dev_get_priv(dev); + int ret; + +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct apl_itss_platdata *plat = dev_get_platdata(dev); + struct dtd_intel_apl_itss *dtplat = &plat->dtplat; + + /* + * It would be nice to do this in the bind() method, but with + * of-platdata binding happens in the order that DM finds things in the + * linker list (i.e. alphabetical order by driver name). So the GPIO + * device may well be bound before its parent (p2sb), and this call + * will fail if p2sb is not bound yet. + * + * TODO(sjg@chromium.org): Add a parent pointer to child devices in dtoc + */ + ret = p2sb_set_port_id(dev, dtplat->intel_p2sb_port_id); + if (ret) + return log_msg_ret("Could not set port id", ret); + priv->route = (struct pmc_route *)dtplat->intel_pmc_routes; + priv->route_count = ARRAY_SIZE(dtplat->intel_pmc_routes) / + sizeof(struct pmc_route); +#else + int size; + + size = dev_read_size(dev, "intel,pmc-routes"); + if (size < 0) + return size; + priv->route = malloc(size); + if (!priv->route) + return -ENOMEM; + ret = dev_read_u32_array(dev, "intel,pmc-routes", (u32 *)priv->route, + size / sizeof(fdt32_t)); + if (ret) + return log_msg_ret("Cannot read pmc-routes", ret); + priv->route_count = size / sizeof(struct pmc_route); +#endif + + return 0; +} + +static const struct irq_ops apl_itss_ops = { + .route_pmc_gpio_gpe = apl_route_pmc_gpio_gpe, + .set_polarity = apl_set_polarity, +#ifndef CONFIG_TPL_BUILD + .snapshot_polarities = apl_snapshot_polarities, + .restore_polarities = apl_restore_polarities, +#endif +}; + +static const struct udevice_id apl_itss_ids[] = { + { .compatible = "intel,apl-itss"}, + { } +}; + +U_BOOT_DRIVER(apl_itss_drv) = { + .name = "intel_apl_itss", + .id = UCLASS_IRQ, + .of_match = apl_itss_ids, + .ops = &apl_itss_ops, + .ofdata_to_platdata = apl_itss_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct apl_itss_platdata), + .priv_auto_alloc_size = sizeof(struct apl_itss_priv), +}; diff --git a/arch/x86/cpu/apollolake/lpc.c b/arch/x86/cpu/apollolake/lpc.c new file mode 100644 index 0000000..45b2144 --- /dev/null +++ b/arch/x86/cpu/apollolake/lpc.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + * + * From coreboot Apollo Lake support lpc.c + */ + +#include <common.h> +#include <dm.h> +#include <spl.h> +#include <asm/lpc_common.h> +#include <asm/pci.h> +#include <asm/arch/iomap.h> +#include <asm/arch/lpc.h> +#include <linux/log2.h> + +void lpc_enable_fixed_io_ranges(uint io_enables) +{ + pci_x86_clrset_config(PCH_DEV_LPC, LPC_IO_ENABLES, 0, io_enables, + PCI_SIZE_16); +} + +/* + * Find the first unused IO window. + * Returns -1 if not found, 0 for reg 0x84, 1 for reg 0x88 ... + */ +static int find_unused_pmio_window(void) +{ + int i; + ulong lgir; + + for (i = 0; i < LPC_NUM_GENERIC_IO_RANGES; i++) { + pci_x86_read_config(PCH_DEV_LPC, LPC_GENERIC_IO_RANGE(i), + &lgir, PCI_SIZE_32); + + if (!(lgir & LPC_LGIR_EN)) + return i; + } + + return -1; +} + +int lpc_open_pmio_window(uint base, uint size) +{ + int i, lgir_reg_num; + u32 lgir_reg_offset, lgir, window_size, alignment; + ulong bridged_size, bridge_base; + ulong reg; + + log_debug("LPC: Trying to open IO window from %x size %x\n", base, + size); + + bridged_size = 0; + bridge_base = base; + + while (bridged_size < size) { + /* Each IO range register can only open a 256-byte window */ + window_size = min(size, (uint)LPC_LGIR_MAX_WINDOW_SIZE); + + /* Window size must be a power of two for the AMASK to work */ + alignment = 1UL << (order_base_2(window_size)); + window_size = ALIGN(window_size, alignment); + + /* Address[15:2] in LGIR[15:12] and Mask[7:2] in LGIR[23:18] */ + lgir = (bridge_base & LPC_LGIR_ADDR_MASK) | LPC_LGIR_EN; + lgir |= ((window_size - 1) << 16) & LPC_LGIR_AMASK_MASK; + + /* Skip programming if same range already programmed */ + for (i = 0; i < LPC_NUM_GENERIC_IO_RANGES; i++) { + pci_x86_read_config(PCH_DEV_LPC, + LPC_GENERIC_IO_RANGE(i), ®, + PCI_SIZE_32); + if (lgir == reg) + return -EALREADY; + } + + lgir_reg_num = find_unused_pmio_window(); + if (lgir_reg_num < 0) { + log_err("LPC: Cannot open IO window: %lx size %lx\n", + bridge_base, size - bridged_size); + log_err("No more IO windows\n"); + + return -ENOSPC; + } + lgir_reg_offset = LPC_GENERIC_IO_RANGE(lgir_reg_num); + + pci_x86_write_config(PCH_DEV_LPC, lgir_reg_offset, lgir, + PCI_SIZE_32); + + log_debug("LPC: Opened IO window LGIR%d: base %lx size %x\n", + lgir_reg_num, bridge_base, window_size); + + bridged_size += window_size; + bridge_base += window_size; + } + + return 0; +} + +void lpc_io_setup_comm_a_b(void) +{ + /* ComA Range 3F8h-3FFh [2:0] */ + u16 com_ranges = LPC_IOD_COMA_RANGE; + u16 com_enable = LPC_IOE_COMA_EN; + + /* Setup I/O Decode Range Register for LPC */ + pci_write_config16(PCH_DEV_LPC, LPC_IO_DECODE, com_ranges); + /* Enable ComA and ComB Port */ + lpc_enable_fixed_io_ranges(com_enable); +} + +static const struct udevice_id apl_lpc_ids[] = { + { .compatible = "intel,apl-lpc" }, + { } +}; + +/* All pads are LPC already configured by the hostbridge, so no probing here */ +U_BOOT_DRIVER(apl_lpc_drv) = { + .name = "intel_apl_lpc", + .id = UCLASS_LPC, + .of_match = apl_lpc_ids, +}; diff --git a/arch/x86/cpu/apollolake/p2sb.c b/arch/x86/cpu/apollolake/p2sb.c new file mode 100644 index 0000000..eb27861 --- /dev/null +++ b/arch/x86/cpu/apollolake/p2sb.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Primary-to-Sideband Bridge + * + * Copyright 2019 Google LLC + */ + +#define LOG_CATEGORY UCLASS_P2SB + +#include <common.h> +#include <dm.h> +#include <dt-structs.h> +#include <p2sb.h> +#include <spl.h> +#include <asm/pci.h> + +struct p2sb_platdata { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_intel_apl_p2sb dtplat; +#endif + ulong mmio_base; + pci_dev_t bdf; +}; + +/* PCI config space registers */ +#define HPTC_OFFSET 0x60 +#define HPTC_ADDR_ENABLE_BIT BIT(7) + +/* High Performance Event Timer Configuration */ +#define P2SB_HPTC 0x60 +#define P2SB_HPTC_ADDRESS_ENABLE BIT(7) + +/* + * ADDRESS_SELECT ENCODING_RANGE + * 0 0xfed0 0000 - 0xfed0 03ff + * 1 0xfed0 1000 - 0xfed0 13ff + * 2 0xfed0 2000 - 0xfed0 23ff + * 3 0xfed0 3000 - 0xfed0 33ff + */ +#define P2SB_HPTC_ADDRESS_SELECT_0 (0 << 0) +#define P2SB_HPTC_ADDRESS_SELECT_1 (1 << 0) +#define P2SB_HPTC_ADDRESS_SELECT_2 (2 << 0) +#define P2SB_HPTC_ADDRESS_SELECT_3 (3 << 0) + +/* + * apl_p2sb_early_init() - Enable decoding for HPET range + * + * This is needed by FSP-M which uses the High Precision Event Timer. + * + * @dev: P2SB device + * @return 0 if OK, -ve on error + */ +static int apl_p2sb_early_init(struct udevice *dev) +{ + struct p2sb_platdata *plat = dev_get_platdata(dev); + pci_dev_t pdev = plat->bdf; + + /* + * Enable decoding for HPET memory address range. + * HPTC_OFFSET(0x60) bit 7, when set the P2SB will decode + * the High Performance Timer memory address range + * selected by bits 1:0 + */ + pci_x86_write_config(pdev, HPTC_OFFSET, HPTC_ADDR_ENABLE_BIT, + PCI_SIZE_8); + + /* Enable PCR Base address in PCH */ + pci_x86_write_config(pdev, PCI_BASE_ADDRESS_0, plat->mmio_base, + PCI_SIZE_32); + pci_x86_write_config(pdev, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32); + + /* Enable P2SB MSE */ + pci_x86_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY, PCI_SIZE_8); + + return 0; +} + +static int apl_p2sb_spl_init(struct udevice *dev) +{ + /* Enable decoding for HPET. Needed for FSP global pointer storage */ + dm_pci_write_config(dev, P2SB_HPTC, P2SB_HPTC_ADDRESS_SELECT_0 | + P2SB_HPTC_ADDRESS_ENABLE, PCI_SIZE_8); + + return 0; +} + +int apl_p2sb_ofdata_to_platdata(struct udevice *dev) +{ + struct p2sb_uc_priv *upriv = dev_get_uclass_priv(dev); + struct p2sb_platdata *plat = dev_get_platdata(dev); + +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + int ret; + + if (spl_phase() == PHASE_TPL) { + u32 base[2]; + + /* TPL sets up the initial BAR */ + ret = dev_read_u32_array(dev, "early-regs", base, + ARRAY_SIZE(base)); + if (ret) + return log_msg_ret("Missing/short early-regs", ret); + plat->mmio_base = base[0]; + plat->bdf = pci_get_devfn(dev); + if (plat->bdf < 0) + return log_msg_ret("Cannot get p2sb PCI address", + plat->bdf); + } else { + plat->mmio_base = dev_read_addr_pci(dev); + /* Don't set BDF since it should not be used */ + if (!plat->mmio_base || plat->mmio_base == FDT_ADDR_T_NONE) + return -EINVAL; + } +#else + plat->mmio_base = plat->dtplat.early_regs[0]; + plat->bdf = pci_ofplat_get_devfn(plat->dtplat.reg[0]); +#endif + upriv->mmio_base = plat->mmio_base; + debug("p2sb: mmio_base=%x\n", (uint)plat->mmio_base); + + return 0; +} + +static int apl_p2sb_probe(struct udevice *dev) +{ + if (spl_phase() == PHASE_TPL) + return apl_p2sb_early_init(dev); + else if (spl_phase() == PHASE_SPL) + return apl_p2sb_spl_init(dev); + + return 0; +} + +static int p2sb_child_post_bind(struct udevice *dev) +{ +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev); + int ret; + u32 pid; + + ret = dev_read_u32(dev, "intel,p2sb-port-id", &pid); + if (ret) + return ret; + pplat->pid = pid; +#endif + + return 0; +} + +static const struct udevice_id apl_p2sb_ids[] = { + { .compatible = "intel,apl-p2sb" }, + { } +}; + +U_BOOT_DRIVER(apl_p2sb_drv) = { + .name = "intel_apl_p2sb", + .id = UCLASS_P2SB, + .of_match = apl_p2sb_ids, + .probe = apl_p2sb_probe, + .ofdata_to_platdata = apl_p2sb_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct p2sb_platdata), + .per_child_platdata_auto_alloc_size = + sizeof(struct p2sb_child_platdata), + .child_post_bind = p2sb_child_post_bind, +}; diff --git a/arch/x86/cpu/apollolake/pch.c b/arch/x86/cpu/apollolake/pch.c new file mode 100644 index 0000000..1a5a985 --- /dev/null +++ b/arch/x86/cpu/apollolake/pch.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + */ + +#include <common.h> +#include <dm.h> +#include <pch.h> +#include <spl.h> +#include <asm/lpc_common.h> + +#define BIOS_CTRL 0xdc + +static int apl_set_spi_protect(struct udevice *dev, bool protect) +{ + if (spl_phase() == PHASE_SPL) + return lpc_set_spi_protect(dev, BIOS_CTRL, protect); + + return 0; +} + +static const struct pch_ops apl_pch_ops = { + .set_spi_protect = apl_set_spi_protect, +}; + +static const struct udevice_id apl_pch_ids[] = { + { .compatible = "intel,apl-pch" }, + { } +}; + +U_BOOT_DRIVER(apl_pch) = { + .name = "apl_pch", + .id = UCLASS_PCH, + .of_match = apl_pch_ids, + .ops = &apl_pch_ops, +}; diff --git a/arch/x86/cpu/apollolake/pmc.c b/arch/x86/cpu/apollolake/pmc.c new file mode 100644 index 0000000..683c608 --- /dev/null +++ b/arch/x86/cpu/apollolake/pmc.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Intel Corporation. + * Copyright 2019 Google LLC + * + * Modified from coreboot pmclib.c, pmc.c and pmutil.c + */ + +#define LOG_CATEGORY UCLASS_ACPI_PMC + +#include <common.h> +#include <acpi_s3.h> +#include <dt-structs.h> +#include <dm.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <power/acpi_pmc.h> + +#define GPIO_GPE_CFG 0x1050 + +/* Memory mapped IO registers behind PMC_BASE_ADDRESS */ +#define PRSTS 0x1000 +#define GEN_PMCON1 0x1020 +#define COLD_BOOT_STS BIT(27) +#define COLD_RESET_STS BIT(26) +#define WARM_RESET_STS BIT(25) +#define GLOBAL_RESET_STS BIT(24) +#define SRS BIT(20) +#define MS4V BIT(18) +#define RPS BIT(2) +#define GEN_PMCON1_CLR1_BITS (COLD_BOOT_STS | COLD_RESET_STS | \ + WARM_RESET_STS | GLOBAL_RESET_STS | \ + SRS | MS4V) +#define GEN_PMCON2 0x1024 +#define GEN_PMCON3 0x1028 + +/* Offset of TCO registers from ACPI base I/O address */ +#define TCO_REG_OFFSET 0x60 +#define TCO1_STS 0x64 +#define DMISCI_STS BIT(9) +#define BOOT_STS BIT(18) +#define TCO2_STS 0x66 +#define TCO1_CNT 0x68 +#define TCO_LOCK BIT(12) +#define TCO2_CNT 0x6a + +enum { + ETR = 0x1048, + CF9_LOCK = 1UL << 31, + CF9_GLB_RST = 1 << 20, +}; + +struct apl_pmc_platdata { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_intel_apl_pmc dtplat; +#endif + pci_dev_t bdf; +}; + +static int apl_pmc_fill_power_state(struct udevice *dev) +{ + struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); + + upriv->tco1_sts = inw(upriv->acpi_base + TCO1_STS); + upriv->tco2_sts = inw(upriv->acpi_base + TCO2_STS); + + upriv->prsts = readl(upriv->pmc_bar0 + PRSTS); + upriv->gen_pmcon1 = readl(upriv->pmc_bar0 + GEN_PMCON1); + upriv->gen_pmcon2 = readl(upriv->pmc_bar0 + GEN_PMCON2); + upriv->gen_pmcon3 = readl(upriv->pmc_bar0 + GEN_PMCON3); + + return 0; +} + +static int apl_prev_sleep_state(struct udevice *dev, int prev_sleep_state) +{ + struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); + + /* WAK_STS bit will not be set when waking from G3 state */ + if (!(upriv->pm1_sts & WAK_STS) && + (upriv->gen_pmcon1 & COLD_BOOT_STS)) + prev_sleep_state = ACPI_S5; + + return prev_sleep_state; +} + +static int apl_disable_tco(struct udevice *dev) +{ + struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); + + pmc_disable_tco_base(upriv->acpi_base + TCO_REG_OFFSET); + + return 0; +} + +static int apl_global_reset_set_enable(struct udevice *dev, bool enable) +{ + struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); + + if (enable) + setbits_le32(upriv->pmc_bar0 + ETR, CF9_GLB_RST); + else + clrbits_le32(upriv->pmc_bar0 + ETR, CF9_GLB_RST); + + return 0; +} + +int apl_pmc_ofdata_to_uc_platdata(struct udevice *dev) +{ + struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); + struct apl_pmc_platdata *plat = dev_get_platdata(dev); + +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + u32 base[6]; + int size; + int ret; + + ret = dev_read_u32_array(dev, "early-regs", base, ARRAY_SIZE(base)); + if (ret) + return log_msg_ret("Missing/short early-regs", ret); + upriv->pmc_bar0 = (void *)base[0]; + upriv->pmc_bar2 = (void *)base[2]; + upriv->acpi_base = base[4]; + + /* Since PCI is not enabled, we must get the BDF manually */ + plat->bdf = pci_get_devfn(dev); + if (plat->bdf < 0) + return log_msg_ret("Cannot get PMC PCI address", plat->bdf); + + /* Get the dwX values for pmc gpe settings */ + size = dev_read_size(dev, "gpe0-dw"); + if (size < 0) + return log_msg_ret("Cannot read gpe0-dm", size); + upriv->gpe0_count = size / sizeof(u32); + ret = dev_read_u32_array(dev, "gpe0-dw", upriv->gpe0_dw, + upriv->gpe0_count); + if (ret) + return log_msg_ret("Bad gpe0-dw", ret); + + return pmc_ofdata_to_uc_platdata(dev); +#else + struct dtd_intel_apl_pmc *dtplat = &plat->dtplat; + + plat->bdf = pci_ofplat_get_devfn(dtplat->reg[0]); + upriv->pmc_bar0 = (void *)dtplat->early_regs[0]; + upriv->pmc_bar2 = (void *)dtplat->early_regs[2]; + upriv->acpi_base = dtplat->early_regs[4]; + upriv->gpe0_dwx_mask = dtplat->gpe0_dwx_mask; + upriv->gpe0_dwx_shift_base = dtplat->gpe0_dwx_shift_base; + upriv->gpe0_sts_reg = dtplat->gpe0_sts; + upriv->gpe0_sts_reg += upriv->acpi_base; + upriv->gpe0_en_reg = dtplat->gpe0_en; + upriv->gpe0_en_reg += upriv->acpi_base; + upriv->gpe0_count = min((int)ARRAY_SIZE(dtplat->gpe0_dw), GPE0_REG_MAX); + memcpy(upriv->gpe0_dw, dtplat->gpe0_dw, sizeof(dtplat->gpe0_dw)); +#endif + upriv->gpe_cfg = (u32 *)(upriv->pmc_bar0 + GPIO_GPE_CFG); + + return 0; +} + +static int enable_pmcbar(struct udevice *dev) +{ + struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); + struct apl_pmc_platdata *priv = dev_get_platdata(dev); + pci_dev_t pmc = priv->bdf; + + /* + * Set PMC base addresses and enable decoding. BARs 1 and 3 are 64-bit + * BARs. + */ + pci_x86_write_config(pmc, PCI_BASE_ADDRESS_0, (ulong)upriv->pmc_bar0, + PCI_SIZE_32); + pci_x86_write_config(pmc, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32); + pci_x86_write_config(pmc, PCI_BASE_ADDRESS_2, (ulong)upriv->pmc_bar2, + PCI_SIZE_32); + pci_x86_write_config(pmc, PCI_BASE_ADDRESS_3, 0, PCI_SIZE_32); + pci_x86_write_config(pmc, PCI_BASE_ADDRESS_4, upriv->acpi_base, + PCI_SIZE_16); + pci_x86_write_config(pmc, PCI_COMMAND, PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, + PCI_SIZE_16); + + return 0; +} + +static int apl_pmc_probe(struct udevice *dev) +{ + if (spl_phase() == PHASE_TPL) + return enable_pmcbar(dev); + + return 0; +} + +static struct acpi_pmc_ops apl_pmc_ops = { + .init = apl_pmc_fill_power_state, + .prev_sleep_state = apl_prev_sleep_state, + .disable_tco = apl_disable_tco, + .global_reset_set_enable = apl_global_reset_set_enable, +}; + +static const struct udevice_id apl_pmc_ids[] = { + { .compatible = "intel,apl-pmc" }, + { } +}; + +U_BOOT_DRIVER(apl_pmc) = { + .name = "intel_apl_pmc", + .id = UCLASS_ACPI_PMC, + .of_match = apl_pmc_ids, + .ofdata_to_platdata = apl_pmc_ofdata_to_uc_platdata, + .probe = apl_pmc_probe, + .ops = &apl_pmc_ops, + .platdata_auto_alloc_size = sizeof(struct apl_pmc_platdata), +}; diff --git a/arch/x86/cpu/apollolake/punit.c b/arch/x86/cpu/apollolake/punit.c new file mode 100644 index 0000000..1a131fb --- /dev/null +++ b/arch/x86/cpu/apollolake/punit.c @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + */ + +#include <common.h> +#include <dm.h> +#include <spl.h> +#include <asm/cpu.h> +#include <asm/cpu_common.h> +#include <asm/intel_regs.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <asm/arch/systemagent.h> + +/* + * Punit Initialisation code. This all isn't documented, but + * this is the recipe. + */ +static int punit_init(struct udevice *dev) +{ + struct udevice *cpu; + u32 reg; + ulong start; + int ret; + + /* Thermal throttle activation offset */ + ret = uclass_first_device_err(UCLASS_CPU, &cpu); + if (ret) + return log_msg_ret("Cannot find CPU", ret); + cpu_configure_thermal_target(cpu); + + /* + * Software Core Disable Mask (P_CR_CORE_DISABLE_MASK_0_0_0_MCHBAR). + * Enable all cores here. + */ + writel(0, MCHBAR_REG(CORE_DISABLE_MASK)); + + /* P-Unit bring up */ + reg = readl(MCHBAR_REG(BIOS_RESET_CPL)); + if (reg == 0xffffffff) { + /* P-unit not found */ + debug("Punit MMIO not available\n"); + return -ENOENT; + } + + /* Set Punit interrupt pin IPIN offset 3D */ + dm_pci_write_config8(dev, PCI_INTERRUPT_PIN, 0x2); + + /* Set PUINT IRQ to 24 and INTPIN LOCK */ + writel(PUINT_THERMAL_DEVICE_IRQ_VEC_NUMBER | + PUINT_THERMAL_DEVICE_IRQ_LOCK, + MCHBAR_REG(PUNIT_THERMAL_DEVICE_IRQ)); + + /* Stage0 BIOS Reset Complete (RST_CPL) */ + enable_bios_reset_cpl(); + + /* + * Poll for bit 8 to check if PCODE has completed its action in response + * to BIOS Reset complete. We wait here till 1 ms for the bit to get + * set. + */ + start = get_timer(0); + while (!(readl(MCHBAR_REG(BIOS_RESET_CPL)) & PCODE_INIT_DONE)) { + if (get_timer(start) > 1) { + debug("PCODE Init Done timeout\n"); + return -ETIMEDOUT; + } + udelay(100); + } + debug("PUNIT init complete\n"); + + return 0; +} + +static int apl_punit_probe(struct udevice *dev) +{ + if (spl_phase() == PHASE_SPL) + return punit_init(dev); + + return 0; +} + +static const struct udevice_id apl_syscon_ids[] = { + { .compatible = "intel,apl-punit", .data = X86_SYSCON_PUNIT }, + { } +}; + +U_BOOT_DRIVER(syscon_intel_punit) = { + .name = "intel_punit_syscon", + .id = UCLASS_SYSCON, + .of_match = apl_syscon_ids, + .probe = apl_punit_probe, +}; diff --git a/arch/x86/cpu/apollolake/spl.c b/arch/x86/cpu/apollolake/spl.c new file mode 100644 index 0000000..7ab7243 --- /dev/null +++ b/arch/x86/cpu/apollolake/spl.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + */ + +#include <common.h> +#include <binman_sym.h> +#include <dm.h> +#include <spi.h> +#include <spl.h> +#include <spi_flash.h> +#include <asm/fast_spi.h> +#include <asm/spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/iomap.h> +#include <dm/device-internal.h> +#include <dm/uclass-internal.h> + +/* This reads the next phase from mapped SPI flash */ +static int rom_load_image(struct spl_image_info *spl_image, + struct spl_boot_device *bootdev) +{ + ulong spl_pos = spl_get_image_pos(); + ulong spl_size = spl_get_image_size(); + struct udevice *dev; + ulong map_base; + size_t map_size; + uint offset; + int ret; + + spl_image->size = CONFIG_SYS_MONITOR_LEN; /* We don't know SPL size */ + spl_image->entry_point = spl_phase() == PHASE_TPL ? + CONFIG_SPL_TEXT_BASE : CONFIG_SYS_TEXT_BASE; + spl_image->load_addr = spl_image->entry_point; + spl_image->os = IH_OS_U_BOOT; + spl_image->name = "U-Boot"; + debug("Reading from mapped SPI %lx, size %lx", spl_pos, spl_size); + + if (CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT)) { + ret = uclass_find_first_device(UCLASS_SPI_FLASH, &dev); + if (ret) + return log_msg_ret("spi_flash", ret); + if (!dev) + return log_msg_ret("spi_flash dev", -ENODEV); + ret = dm_spi_get_mmap(dev, &map_base, &map_size, &offset); + if (ret) + return log_msg_ret("mmap", ret); + } else { + ret = fast_spi_get_bios_mmap(PCH_DEV_SPI, &map_base, &map_size, + &offset); + if (ret) + return ret; + } + spl_pos += map_base & ~0xff000000; + debug(", base %lx, pos %lx\n", map_base, spl_pos); + bootstage_start(BOOTSTAGE_ID_ACCUM_MMAP_SPI, "mmap_spi"); + memcpy((void *)spl_image->load_addr, (void *)spl_pos, spl_size); + cpu_flush_l1d_to_l2(); + bootstage_accum(BOOTSTAGE_ID_ACCUM_MMAP_SPI); + + return 0; +} +SPL_LOAD_IMAGE_METHOD("Mapped SPI", 2, BOOT_DEVICE_SPI_MMAP, rom_load_image); + +#if CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT) + +static int apl_flash_std_read(struct udevice *dev, u32 offset, size_t len, + void *buf) +{ + struct spi_flash *flash = dev_get_uclass_priv(dev); + struct mtd_info *mtd = &flash->mtd; + size_t retlen; + + return log_ret(mtd->_read(mtd, offset, len, &retlen, buf)); +} + +static int apl_flash_probe(struct udevice *dev) +{ + return spi_flash_std_probe(dev); +} + +/* + * Manually set the parent of the SPI flash to SPI, since dtoc doesn't. We also + * need to allocate the parent_platdata since by the time this function is + * called device_bind() has already gone past that step. + */ +static int apl_flash_bind(struct udevice *dev) +{ + if (CONFIG_IS_ENABLED(OF_PLATDATA)) { + struct dm_spi_slave_platdata *plat; + struct udevice *spi; + int ret; + + ret = uclass_first_device_err(UCLASS_SPI, &spi); + if (ret) + return ret; + dev->parent = spi; + + plat = calloc(sizeof(*plat), 1); + if (!plat) + return -ENOMEM; + dev->parent_platdata = plat; + } + + return 0; +} + +static const struct dm_spi_flash_ops apl_flash_ops = { + .read = apl_flash_std_read, +}; + +static const struct udevice_id apl_flash_ids[] = { + { .compatible = "jedec,spi-nor" }, + { } +}; + +U_BOOT_DRIVER(winbond_w25q128fw) = { + .name = "winbond_w25q128fw", + .id = UCLASS_SPI_FLASH, + .of_match = apl_flash_ids, + .bind = apl_flash_bind, + .probe = apl_flash_probe, + .priv_auto_alloc_size = sizeof(struct spi_flash), + .ops = &apl_flash_ops, +}; + +/* This uses a SPI flash device to read the next phase */ +static int spl_fast_spi_load_image(struct spl_image_info *spl_image, + struct spl_boot_device *bootdev) +{ + ulong spl_pos = spl_get_image_pos(); + ulong spl_size = spl_get_image_size(); + struct udevice *dev; + int ret; + + ret = uclass_first_device_err(UCLASS_SPI_FLASH, &dev); + if (ret) + return ret; + + spl_image->size = CONFIG_SYS_MONITOR_LEN; /* We don't know SPL size */ + spl_image->entry_point = spl_phase() == PHASE_TPL ? + CONFIG_SPL_TEXT_BASE : CONFIG_SYS_TEXT_BASE; + spl_image->load_addr = spl_image->entry_point; + spl_image->os = IH_OS_U_BOOT; + spl_image->name = "U-Boot"; + spl_pos &= ~0xff000000; + debug("Reading from flash %lx, size %lx\n", spl_pos, spl_size); + ret = spi_flash_read_dm(dev, spl_pos, spl_size, + (void *)spl_image->load_addr); + cpu_flush_l1d_to_l2(); + if (ret) + return ret; + + return 0; +} +SPL_LOAD_IMAGE_METHOD("Fast SPI", 1, BOOT_DEVICE_FAST_SPI, + spl_fast_spi_load_image); + +void board_boot_order(u32 *spl_boot_list) +{ + bool use_spi_flash = IS_ENABLED(CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH); + + if (use_spi_flash) { + spl_boot_list[0] = BOOT_DEVICE_FAST_SPI; + spl_boot_list[1] = BOOT_DEVICE_SPI_MMAP; + } else { + spl_boot_list[0] = BOOT_DEVICE_SPI_MMAP; + spl_boot_list[1] = BOOT_DEVICE_FAST_SPI; + } +} + +#else + +void board_boot_order(u32 *spl_boot_list) +{ + spl_boot_list[0] = BOOT_DEVICE_SPI_MMAP; +} +#endif diff --git a/arch/x86/cpu/apollolake/systemagent.c b/arch/x86/cpu/apollolake/systemagent.c new file mode 100644 index 0000000..b6bc2ba --- /dev/null +++ b/arch/x86/cpu/apollolake/systemagent.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Intel Corporation. + * Take from coreboot project file of the same name + */ + +#include <common.h> +#include <asm/intel_regs.h> +#include <asm/io.h> +#include <asm/arch/systemagent.h> + +void enable_bios_reset_cpl(void) +{ + /* + * Set bits 0+1 of BIOS_RESET_CPL to indicate to the CPU + * that BIOS has initialised memory and power management + * + * The FSP-S does not do this. If we leave this as zero then I believe + * the power-aware interrupts don't work in Linux, and CPU 0 always gets + * the interrupt. + */ + setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 3); +} diff --git a/arch/x86/cpu/apollolake/uart.c b/arch/x86/cpu/apollolake/uart.c new file mode 100644 index 0000000..f2b356e --- /dev/null +++ b/arch/x86/cpu/apollolake/uart.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Special driver to handle of-platdata + * + * Copyright 2019 Google LLC + * + * Some code from coreboot lpss.c + */ + +#include <common.h> +#include <dm.h> +#include <dt-structs.h> +#include <ns16550.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <asm/lpss.h> + +/* Low-power Subsystem (LPSS) clock register */ +enum { + LPSS_CLOCK_CTL_REG = 0x200, + LPSS_CNT_CLOCK_EN = 1, + LPSS_CNT_CLK_UPDATE = 1U << 31, + LPSS_CLOCK_DIV_N_SHIFT = 16, + LPSS_CLOCK_DIV_N_MASK = 0x7fff << LPSS_CLOCK_DIV_N_SHIFT, + LPSS_CLOCK_DIV_M_SHIFT = 1, + LPSS_CLOCK_DIV_M_MASK = 0x7fff << LPSS_CLOCK_DIV_M_SHIFT, + + /* These set the UART input clock speed */ + LPSS_UART_CLK_M_VAL = 0x25a, + LPSS_UART_CLK_N_VAL = 0x7fff, +}; + +static void lpss_clk_update(void *regs, u32 clk_m_val, u32 clk_n_val) +{ + u32 clk_sel; + + clk_sel = clk_n_val << LPSS_CLOCK_DIV_N_SHIFT | + clk_m_val << LPSS_CLOCK_DIV_M_SHIFT; + clk_sel |= LPSS_CNT_CLK_UPDATE | LPSS_CNT_CLOCK_EN; + + writel(clk_sel, regs + LPSS_CLOCK_CTL_REG); +} + +static void uart_lpss_init(void *regs) +{ + /* Take UART out of reset */ + lpss_reset_release(regs); + + /* Set M and N divisor inputs and enable clock */ + lpss_clk_update(regs, LPSS_UART_CLK_M_VAL, LPSS_UART_CLK_N_VAL); +} + +void apl_uart_init(pci_dev_t bdf, ulong base) +{ + /* Set UART base address */ + pci_x86_write_config(bdf, PCI_BASE_ADDRESS_0, base, PCI_SIZE_32); + + /* Enable memory access and bus master */ + pci_x86_write_config(bdf, PCI_COMMAND, PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER, PCI_SIZE_32); + + uart_lpss_init((void *)base); +} + +/* + * This driver uses its own compatible string but almost everything else from + * the standard ns16550 driver. This allows us to provide an of-platdata + * implementation, since the platdata produced by of-platdata does not match + * struct ns16550_platdata. + * + * When running with of-platdata (generally TPL), the platdata is converted to + * something that ns16550 expects. When running withoutof-platdata (SPL, U-Boot + * proper), we use ns16550's ofdata_to_platdata routine. + */ + +static int apl_ns16550_probe(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + + if (!CONFIG_IS_ENABLED(PCI)) + apl_uart_init(plat->bdf, plat->base); + + return ns16550_serial_probe(dev); +} + +static int apl_ns16550_ofdata_to_platdata(struct udevice *dev) +{ +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_intel_apl_ns16550 *dtplat = dev_get_platdata(dev); + struct ns16550_platdata *plat; + + /* + * Convert our platdata to the ns16550's platdata, so we can just use + * that driver + */ + plat = malloc(sizeof(*plat)); + if (!plat) + return -ENOMEM; + plat->base = dtplat->early_regs[0]; + plat->reg_width = 1; + plat->reg_shift = dtplat->reg_shift; + plat->reg_offset = 0; + plat->clock = dtplat->clock_frequency; + plat->fcr = UART_FCR_DEFVAL; + plat->bdf = pci_ofplat_get_devfn(dtplat->reg[0]); + dev->platdata = plat; +#else + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; +#endif /* OF_PLATDATA */ + + return 0; +} + +static const struct udevice_id apl_ns16550_serial_ids[] = { + { .compatible = "intel,apl-ns16550" }, + { }, +}; + +U_BOOT_DRIVER(apl_ns16550) = { + .name = "intel_apl_ns16550", + .id = UCLASS_SERIAL, + .of_match = apl_ns16550_serial_ids, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .ops = &ns16550_serial_ops, + .ofdata_to_platdata = apl_ns16550_ofdata_to_platdata, + .probe = apl_ns16550_probe, +}; diff --git a/arch/x86/cpu/broadwell/sdram.c b/arch/x86/cpu/broadwell/sdram.c index dfd8afc..15bfc58 100644 --- a/arch/x86/cpu/broadwell/sdram.c +++ b/arch/x86/cpu/broadwell/sdram.c @@ -83,7 +83,7 @@ static int prepare_mrc_cache(struct pei_data *pei_data) struct mrc_region entry; int ret; - ret = mrccache_get_region(NULL, &entry); + ret = mrccache_get_region(MRC_TYPE_NORMAL, NULL, &entry); if (ret) return ret; mrc_cache = mrccache_find_current(&entry); @@ -169,12 +169,14 @@ int dram_init(void) pei_data->data_to_save); /* S3 resume: don't save scrambler seed or MRC data */ if (pei_data->boot_mode != SLEEP_STATE_S3) { + struct mrc_output *mrc = &gd->arch.mrc[MRC_TYPE_NORMAL]; + /* * This will be copied to SDRAM in reserve_arch(), then written * to SPI flash in mrccache_save() */ - gd->arch.mrc_output = (char *)pei_data->data_to_save; - gd->arch.mrc_output_len = pei_data->data_to_save_size; + mrc->buf = (char *)pei_data->data_to_save; + mrc->len = pei_data->data_to_save_size; } gd->arch.pei_meminfo = pei_data->meminfo; diff --git a/arch/x86/cpu/coreboot/Kconfig b/arch/x86/cpu/coreboot/Kconfig index 93f61f2..c8e6a88 100644 --- a/arch/x86/cpu/coreboot/Kconfig +++ b/arch/x86/cpu/coreboot/Kconfig @@ -24,5 +24,6 @@ config SYS_COREBOOT imply CMD_CBFS imply FS_CBFS imply CBMEM_CONSOLE + imply X86_TSC_READ_BASE endif diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index 4e59476..d626e38 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -46,6 +46,7 @@ DECLARE_GLOBAL_DATA_PTR; +#ifndef CONFIG_TPL_BUILD static const char *const x86_vendor_name[] = { [X86_VENDOR_INTEL] = "Intel", [X86_VENDOR_CYRIX] = "Cyrix", @@ -58,6 +59,7 @@ static const char *const x86_vendor_name[] = { [X86_VENDOR_NSC] = "NSC", [X86_VENDOR_SIS] = "SiS", }; +#endif int __weak x86_cleanup_before_linux(void) { @@ -114,6 +116,7 @@ int icache_status(void) return 1; } +#ifndef CONFIG_TPL_BUILD const char *cpu_vendor_name(int vendor) { const char *name; @@ -124,6 +127,7 @@ const char *cpu_vendor_name(int vendor) return name; } +#endif char *cpu_get_name(char *name) { diff --git a/arch/x86/cpu/i386/Makefile b/arch/x86/cpu/i386/Makefile index 0c47252..18e15207 100644 --- a/arch/x86/cpu/i386/Makefile +++ b/arch/x86/cpu/i386/Makefile @@ -5,5 +5,7 @@ obj-y += call64.o obj-y += cpu.o +ifndef CONFIG_TPL_BUILD obj-y += interrupt.o +endif obj-y += setjmp.o diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c index c66382b..2b27617 100644 --- a/arch/x86/cpu/i386/cpu.c +++ b/arch/x86/cpu/i386/cpu.c @@ -21,6 +21,7 @@ #include <common.h> #include <cpu_func.h> #include <malloc.h> +#include <spl.h> #include <asm/control_regs.h> #include <asm/cpu.h> #include <asm/mp.h> @@ -58,6 +59,8 @@ struct cpuinfo_x86 { uint8_t x86_mask; }; +/* gcc 7.3 does not wwant to drop x86_vendors, so use #ifdef */ +#ifndef CONFIG_TPL_BUILD /* * List of cpu vendor strings along with their normalized * id values. @@ -78,6 +81,7 @@ static const struct { { X86_VENDOR_NSC, "Geode by NSC", }, { X86_VENDOR_SIS, "SiS SiS SiS ", }, }; +#endif static void load_ds(u32 segment) { @@ -199,6 +203,7 @@ static inline int test_cyrix_52div(void) return (unsigned char) (test >> 8) == 0x02; } +#ifndef CONFIG_TPL_BUILD /* * Detect a NexGen CPU running without BIOS hypercode new enough * to have CPUID. (Thanks to Herbert Oppmann) @@ -219,6 +224,7 @@ static int deep_magic_nexgen_probe(void) : "=a" (ret) : : "cx", "dx"); return ret; } +#endif static bool has_cpuid(void) { @@ -230,6 +236,7 @@ static bool has_mtrr(void) return cpuid_edx(0x00000001) & (1 << 12) ? true : false; } +#ifndef CONFIG_TPL_BUILD static int build_vendor_name(char *vendor_name) { struct cpuid_result result; @@ -242,14 +249,40 @@ static int build_vendor_name(char *vendor_name) return result.eax; } +#endif static void identify_cpu(struct cpu_device_id *cpu) { + cpu->device = 0; /* fix gcc 4.4.4 warning */ + + /* + * Do a quick and dirty check to save space - Intel and AMD only and + * just the vendor. This is enough for most TPL code. + */ + if (spl_phase() == PHASE_TPL) { + struct cpuid_result result; + + result = cpuid(0x00000000); + switch (result.ecx >> 24) { + case 'l': /* GenuineIntel */ + cpu->vendor = X86_VENDOR_INTEL; + break; + case 'D': /* AuthenticAMD */ + cpu->vendor = X86_VENDOR_AMD; + break; + default: + cpu->vendor = X86_VENDOR_ANY; + break; + } + return; + } + +/* gcc 7.3 does not want to drop x86_vendors, so use #ifdef */ +#ifndef CONFIG_TPL_BUILD char vendor_name[16]; int i; vendor_name[0] = '\0'; /* Unset */ - cpu->device = 0; /* fix gcc 4.4.4 warning */ /* Find the id and vendor_name */ if (!has_cpuid()) { @@ -265,9 +298,8 @@ static void identify_cpu(struct cpu_device_id *cpu) /* Detect NexGen with old hypercode */ else if (deep_magic_nexgen_probe()) memcpy(vendor_name, "NexGenDriven", 13); - } - if (has_cpuid()) { - int cpuid_level; + } else { + int cpuid_level; cpuid_level = build_vendor_name(vendor_name); vendor_name[12] = '\0'; @@ -287,6 +319,7 @@ static void identify_cpu(struct cpu_device_id *cpu) break; } } +#endif } static inline void get_fms(struct cpuinfo_x86 *c, uint32_t tfms) diff --git a/arch/x86/cpu/intel_common/Makefile b/arch/x86/cpu/intel_common/Makefile index 07f27c2..cc4e1c9 100644 --- a/arch/x86/cpu/intel_common/Makefile +++ b/arch/x86/cpu/intel_common/Makefile @@ -8,8 +8,18 @@ obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += me_status.o obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += report_platform.o obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += mrc.o endif + +ifdef CONFIG_INTEL_CAR_CQOS +obj-$(CONFIG_TPL_BUILD) += car2.o +ifndef CONFIG_SPL_BUILD +obj-y += car2_uninit.o +endif +endif + obj-y += cpu.o +obj-y += fast_spi.o obj-y += lpc.o +obj-y += lpss.o ifndef CONFIG_TARGET_EFI_APP obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += microcode.o ifndef CONFIG_$(SPL_)X86_64 diff --git a/arch/x86/cpu/intel_common/car2.S b/arch/x86/cpu/intel_common/car2.S new file mode 100644 index 0000000..086f987 --- /dev/null +++ b/arch/x86/cpu/intel_common/car2.S @@ -0,0 +1,448 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This file was modified from the coreboot version. + * + * Copyright (C) 2015-2016 Intel Corp. + */ + +#include <config.h> +#include <asm/msr-index.h> +#include <asm/mtrr.h> +#include <asm/post.h> +#include <asm/processor.h> +#include <asm/processor-flags.h> + +#define KiB 1024 + +#define IS_POWER_OF_2(x) (!((x) & ((x) - 1))) + +.global car_init +car_init: + post_code(POST_CAR_START) + + /* + * Use the MTRR default type MSR as a proxy for detecting INIT#. + * Reset the system if any known bits are set in that MSR. That is + * an indication of the CPU not being properly reset. + */ +check_for_clean_reset: + mov $MTRR_DEF_TYPE_MSR, %ecx + rdmsr + and $(MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN), %eax + cmp $0, %eax + jz no_reset + /* perform warm reset */ + movw $IO_PORT_RESET, %dx + movb $(SYS_RST | RST_CPU), %al + outb %al, %dx + +no_reset: + post_code(POST_CAR_SIPI) + + /* Clear/disable fixed MTRRs */ + mov $fixed_mtrr_list_size, %ebx + xor %eax, %eax + xor %edx, %edx + +clear_fixed_mtrr: + add $-2, %ebx + movzwl fixed_mtrr_list(%ebx), %ecx + wrmsr + jnz clear_fixed_mtrr + + post_code(POST_CAR_MTRR) + + /* Figure put how many MTRRs we have, and clear them out */ + mov $MTRR_CAP_MSR, %ecx + rdmsr + movzb %al, %ebx /* Number of variable MTRRs */ + mov $MTRR_PHYS_BASE_MSR(0), %ecx + xor %eax, %eax + xor %edx, %edx + +clear_var_mtrr: + wrmsr + inc %ecx + wrmsr + inc %ecx + dec %ebx + jnz clear_var_mtrr + + post_code(POST_CAR_UNCACHEABLE) + + /* Configure default memory type to uncacheable (UC) */ + mov $MTRR_DEF_TYPE_MSR, %ecx + rdmsr + /* Clear enable bits and set default type to UC */ + and $~(MTRR_DEF_TYPE_MASK | MTRR_DEF_TYPE_EN | \ + MTRR_DEF_TYPE_FIX_EN), %eax + wrmsr + + /* + * Configure MTRR_PHYS_MASK_HIGH for proper addressing above 4GB + * based on the physical address size supported for this processor + * This is based on read from CPUID EAX = 080000008h, EAX bits [7:0] + * + * Examples: + * MTRR_PHYS_MASK_HIGH = 00000000Fh For 36 bit addressing + * MTRR_PHYS_MASK_HIGH = 0000000FFh For 40 bit addressing + */ + + movl $0x80000008, %eax /* Address sizes leaf */ + cpuid + sub $32, %al + movzx %al, %eax + xorl %esi, %esi + bts %eax, %esi + dec %esi /* esi <- MTRR_PHYS_MASK_HIGH */ + + post_code(POST_CAR_BASE_ADDRESS) + +#if IS_POWER_OF_2(CONFIG_DCACHE_RAM_SIZE) + /* Configure CAR region as write-back (WB) */ + mov $MTRR_PHYS_BASE_MSR(0), %ecx + mov $CONFIG_DCACHE_RAM_BASE, %eax + or $MTRR_TYPE_WRBACK, %eax + xor %edx,%edx + wrmsr + + /* Configure the MTRR mask for the size region */ + mov $MTRR_PHYS_MASK(0), %ecx + mov $CONFIG_DCACHE_RAM_SIZE, %eax /* size mask */ + dec %eax + not %eax + or $MTRR_PHYS_MASK_VALID, %eax + movl %esi, %edx /* edx <- MTRR_PHYS_MASK_HIGH */ + wrmsr +#elif (CONFIG_DCACHE_RAM_SIZE == 768 * KiB) /* 768 KiB */ + /* Configure CAR region as write-back (WB) */ + mov $MTRR_PHYS_BASE_MSR(0), %ecx + mov $CONFIG_DCACHE_RAM_BASE, %eax + or $MTRR_TYPE_WRBACK, %eax + xor %edx,%edx + wrmsr + + mov $MTRR_PHYS_MASK_MSR(0), %ecx + mov $(512 * KiB), %eax /* size mask */ + dec %eax + not %eax + or $MTRR_PHYS_MASK_VALID, %eax + movl %esi, %edx /* edx <- MTRR_PHYS_MASK_HIGH */ + wrmsr + + mov $MTRR_PHYS_BASE_MSR(1), %ecx + mov $(CONFIG_DCACHE_RAM_BASE + 512 * KiB), %eax + or $MTRR_TYPE_WRBACK, %eax + xor %edx,%edx + wrmsr + + mov $MTRR_PHYS_MASK_MSR(1), %ecx + mov $(256 * KiB), %eax /* size mask */ + dec %eax + not %eax + or $MTRR_PHYS_MASK_VALID, %eax + movl %esi, %edx /* edx <- MTRR_PHYS_MASK_HIGH */ + wrmsr +#else +#error "DCACHE_RAM_SIZE is not a power of 2 and setup code is missing" +#endif + post_code(POST_CAR_FILL) + + /* Enable variable MTRRs */ + mov $MTRR_DEF_TYPE_MSR, %ecx + rdmsr + or $MTRR_DEF_TYPE_EN, %eax + wrmsr + + /* Enable caching */ + mov %cr0, %eax + and $~(X86_CR0_CD | X86_CR0_NW), %eax + invd + mov %eax, %cr0 + +#if IS_ENABLED(CONFIG_INTEL_CAR_NEM) + jmp car_nem +#elif IS_ENABLED(CONFIG_INTEL_CAR_CQOS) + jmp car_cqos +#elif IS_ENABLED(CONFIG_INTEL_CAR_NEM_ENHANCED) + jmp car_nem_enhanced +#else +#error "No CAR mechanism selected: +#endif + jmp car_init_ret + +fixed_mtrr_list: + .word MTRR_FIX_64K_00000_MSR + .word MTRR_FIX_16K_80000_MSR + .word MTRR_FIX_16K_A0000_MSR + .word MTRR_FIX_4K_C0000_MSR + .word MTRR_FIX_4K_C8000_MSR + .word MTRR_FIX_4K_D0000_MSR + .word MTRR_FIX_4K_D8000_MSR + .word MTRR_FIX_4K_E0000_MSR + .word MTRR_FIX_4K_E8000_MSR + .word MTRR_FIX_4K_F0000_MSR + .word MTRR_FIX_4K_F8000_MSR +fixed_mtrr_list_size = . - fixed_mtrr_list + +#if IS_ENABLED(CONFIG_INTEL_CAR_NEM) +.global car_nem +car_nem: + /* Disable cache eviction (setup stage) */ + mov $MSR_EVICT_CTL, %ecx + rdmsr + or $0x1, %eax + wrmsr + + post_code(0x26) + + /* Clear the cache memory region. This will also fill up the cache */ + movl $CONFIG_DCACHE_RAM_BASE, %edi + movl $CONFIG_DCACHE_RAM_SIZE, %ecx + shr $0x02, %ecx + xor %eax, %eax + cld + rep stosl + + post_code(0x27) + + /* Disable cache eviction (run stage) */ + mov $MSR_EVICT_CTL, %ecx + rdmsr + or $0x2, %eax + wrmsr + + post_code(0x28) + + jmp car_init_ret + +#elif IS_ENABLED(CONFIG_INTEL_CAR_CQOS) +.global car_cqos +car_cqos: + /* + * Create CBM_LEN_MASK based on CBM_LEN + * Get CPUID.(EAX=10H, ECX=2H):EAX.CBM_LEN[bits 4:0] + */ + mov $0x10, %eax + mov $0x2, %ecx + cpuid + and $0x1f, %eax + add $1, %al + + mov $1, %ebx + mov %al, %cl + shl %cl, %ebx + sub $1, %ebx + + /* Store the CBM_LEN_MASK in mm3 for later use */ + movd %ebx, %mm3 + + /* + * Disable both L1 and L2 prefetcher. For yet-to-understood reason, + * prefetchers slow down filling cache with rep stos in CQOS mode. + */ + mov $MSR_PREFETCH_CTL, %ecx + rdmsr + or $(PREFETCH_L1_DISABLE | PREFETCH_L2_DISABLE), %eax + wrmsr + +#if (CONFIG_DCACHE_RAM_SIZE == CONFIG_L2_CACHE_SIZE) +/* + * If CAR size is set to full L2 size, mask is calculated as all-zeros. + * This is not supported by the CPU/uCode. + */ +#error "CQOS CAR may not use whole L2 cache area" +#endif + + /* Calculate how many bits to be used for CAR */ + xor %edx, %edx + mov $CONFIG_DCACHE_RAM_SIZE, %eax /* dividend */ + mov $CONFIG_CACHE_QOS_SIZE_PER_BIT, %ecx /* divisor */ + div %ecx /* result is in eax */ + mov %eax, %ecx /* save to ecx */ + mov $1, %ebx + shl %cl, %ebx + sub $1, %ebx /* resulting mask is is in ebx */ + + /* Set this mask for initial cache fill */ + mov $MSR_L2_QOS_MASK(0), %ecx + rdmsr + mov %ebx, %eax + wrmsr + + /* Set CLOS selector to 0 */ + mov $MSR_IA32_PQR_ASSOC, %ecx + rdmsr + and $~MSR_IA32_PQR_ASSOC_MASK, %edx /* select mask 0 */ + wrmsr + + /* We will need to block CAR region from evicts */ + mov $MSR_L2_QOS_MASK(1), %ecx + rdmsr + /* Invert bits that are to be used for cache */ + mov %ebx, %eax + xor $~0, %eax /* invert 32 bits */ + + /* + * Use CBM_LEN_MASK stored in mm3 to set bits based on Capacity Bit + * Mask Length. + */ + movd %mm3, %ebx + and %ebx, %eax + wrmsr + + post_code(0x26) + + /* Clear the cache memory region. This will also fill up the cache */ + movl $CONFIG_DCACHE_RAM_BASE, %edi + movl $CONFIG_DCACHE_RAM_SIZE, %ecx + shr $0x02, %ecx + xor %eax, %eax + cld + rep stosl + + post_code(0x27) + + /* Cache is populated. Use mask 1 that will block evicts */ + mov $MSR_IA32_PQR_ASSOC, %ecx + rdmsr + and $~MSR_IA32_PQR_ASSOC_MASK, %edx /* clear index bits first */ + or $1, %edx /* select mask 1 */ + wrmsr + + /* Enable prefetchers */ + mov $MSR_PREFETCH_CTL, %ecx + rdmsr + and $~(PREFETCH_L1_DISABLE | PREFETCH_L2_DISABLE), %eax + wrmsr + + post_code(0x28) + + jmp car_init_ret + +#elif IS_ENABLED(CONFIG_INTEL_CAR_NEM_ENHANCED) +.global car_nem_enhanced +car_nem_enhanced: + /* Disable cache eviction (setup stage) */ + mov $MSR_EVICT_CTL, %ecx + rdmsr + or $0x1, %eax + wrmsr + post_code(0x26) + + /* Create n-way set associativity of cache */ + xorl %edi, %edi +find_llc_subleaf: + movl %edi, %ecx + movl $0x04, %eax + cpuid + inc %edi + and $0xe0, %al /* EAX[7:5] = Cache Level */ + cmp $0x60, %al /* Check to see if it is LLC */ + jnz find_llc_subleaf + + /* + * Set MSR 0xC91 IA32_L3_MASK_! = 0xE/0xFE/0xFFE/0xFFFE + * for 4/8/16 way of LLC + */ + shr $22, %ebx + inc %ebx + /* Calculate n-way associativity of LLC */ + mov %bl, %cl + + /* + * Maximizing RO cacheability while locking in the CAR to a + * single way since that particular way won't be victim candidate + * for evictions. + * This has been done after programing LLC_WAY_MASK_1 MSR + * with desired LLC way as mentioned below. + * + * Hence create Code and Data Size as per request + * Code Size (RO) : Up to 16M + * Data Size (RW) : Up to 256K + */ + movl $0x01, %eax + /* + * LLC Ways -> LLC_WAY_MASK_1: + * 4: 0x000E + * 8: 0x00FE + * 12: 0x0FFE + * 16: 0xFFFE + * + * These MSRs contain one bit per each way of LLC + * - If this bit is '0' - the way is protected from eviction + * - If this bit is '1' - the way is not protected from eviction + */ + shl %cl, %eax + subl $0x02, %eax + movl $MSR_IA32_L3_MASK_1, %ecx + xorl %edx, %edx + wrmsr + /* + * Set MSR 0xC92 IA32_L3_MASK_2 = 0x1 + * + * For SKL SOC, data size remains 256K consistently. + * Hence, creating 1-way associative cache for Data + */ + mov $MSR_IA32_L3_MASK_2, %ecx + mov $0x01, %eax + xorl %edx, %edx + wrmsr + /* + * Set MSR_IA32_PQR_ASSOC = 0x02 + * + * Possible values: + * 0: Default value, no way mask should be applied + * 1: Apply way mask 1 to LLC + * 2: Apply way mask 2 to LLC + * 3: Shouldn't be use in NEM Mode + */ + movl $MSR_IA32_PQR_ASSOC, %ecx + movl $0x02, %eax + xorl %edx, %edx + wrmsr + + movl $CONFIG_DCACHE_RAM_BASE, %edi + movl $CONFIG_DCACHE_RAM_SIZE, %ecx + shr $0x02, %ecx + xor %eax, %eax + cld + rep stosl + /* + * Set MSR_IA32_PQR_ASSOC = 0x01 + * At this stage we apply LLC_WAY_MASK_1 to the cache. + * i.e. way 0 is protected from eviction. + */ + movl $MSR_IA32_PQR_ASSOC, %ecx + movl $0x01, %eax + xorl %edx, %edx + wrmsr + + post_code(0x27) + /* + * Enable No-Eviction Mode Run State by setting + * NO_EVICT_MODE MSR 2E0h bit [1] = '1'. + */ + + movl $MSR_EVICT_CTL, %ecx + rdmsr + orl $0x02, %eax + wrmsr + + post_code(0x28) + + jmp car_init_ret +#endif + +#if CONFIG_IS_ENABLED(X86_16BIT_INIT) +_dt_ucode_base_size: + /* These next two fields are filled in by binman */ +.globl ucode_base +ucode_base: /* Declared in microcode.h */ + .long 0 /* microcode base */ +.globl ucode_size +ucode_size: /* Declared in microcode.h */ + .long 0 /* microcode size */ + .long CONFIG_SYS_MONITOR_BASE /* code region base */ + .long CONFIG_SYS_MONITOR_LEN /* code region size */ +#endif diff --git a/arch/x86/cpu/intel_common/car2_uninit.S b/arch/x86/cpu/intel_common/car2_uninit.S new file mode 100644 index 0000000..aba3a53 --- /dev/null +++ b/arch/x86/cpu/intel_common/car2_uninit.S @@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2017 Intel Corp. + * Copyright 2019 Google LLC + * Taken from coreboot file exit_car.S + */ + +#include <config.h> +#include <asm/msr-index.h> +#include <asm/mtrr.h> + +.text +.global car_uninit +car_uninit: + + /* + * Retrieve return address from stack as it will get trashed below if + * execution is utilizing the cache-as-ram stack. + */ + pop %ebx + + /* Disable MTRRs */ + mov $(MTRR_DEF_TYPE_MSR), %ecx + rdmsr + and $(~(MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN)), %eax + wrmsr + +#ifdef CONFIG_INTEL_CAR_NEM +.global car_nem_teardown +car_nem_teardown: + + /* invalidate cache contents */ + invd + + /* Knock down bit 1 then bit 0 of NEM control not combining steps */ + mov $(MSR_EVICT_CTL), %ecx + rdmsr + and $(~(1 << 1)), %eax + wrmsr + and $(~(1 << 0)), %eax + wrmsr + +#elif IS_ENABLED(CONFIG_INTEL_CAR_CQOS) +.global car_cqos_teardown +car_cqos_teardown: + + /* Go back to all-evicting mode, set both masks to all-1s */ + mov $MSR_L2_QOS_MASK(0), %ecx + rdmsr + mov $~0, %al + wrmsr + + mov $MSR_L2_QOS_MASK(1), %ecx + rdmsr + mov $~0, %al + wrmsr + + /* Reset CLOS selector to 0 */ + mov $MSR_IA32_PQR_ASSOC, %ecx + rdmsr + and $~MSR_IA32_PQR_ASSOC_MASK, %edx + wrmsr + +#elif IS_ENABLED(CONFIG_INTEL_CAR_NEM_ENHANCED) +.global car_nem_enhanced_teardown +car_nem_enhanced_teardown: + + /* invalidate cache contents */ + invd + + /* Knock down bit 1 then bit 0 of NEM control not combining steps */ + mov $(MSR_EVICT_CTL), %ecx + rdmsr + and $(~(1 << 1)), %eax + wrmsr + and $(~(1 << 0)), %eax + wrmsr + + /* Reset CLOS selector to 0 */ + mov $IA32_PQR_ASSOC, %ecx + rdmsr + and $~IA32_PQR_ASSOC_MASK, %edx + wrmsr +#endif + + /* Return to caller */ + jmp *%ebx diff --git a/arch/x86/cpu/intel_common/fast_spi.c b/arch/x86/cpu/intel_common/fast_spi.c new file mode 100644 index 0000000..a6e3d0a --- /dev/null +++ b/arch/x86/cpu/intel_common/fast_spi.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/cpu_common.h> +#include <asm/fast_spi.h> +#include <asm/pci.h> + +/* + * Returns bios_start and fills in size of the BIOS region. + */ +static ulong fast_spi_get_bios_region(struct fast_spi_regs *regs, + uint *bios_size) +{ + ulong bios_start, bios_end; + + /* + * BIOS_BFPREG provides info about BIOS-Flash Primary Region Base and + * Limit. Base and Limit fields are in units of 4K. + */ + u32 val = readl(®s->bfp); + + bios_start = (val & SPIBAR_BFPREG_PRB_MASK) << 12; + bios_end = (((val & SPIBAR_BFPREG_PRL_MASK) >> + SPIBAR_BFPREG_PRL_SHIFT) + 1) << 12; + *bios_size = bios_end - bios_start; + + return bios_start; +} + +int fast_spi_get_bios_mmap(pci_dev_t pdev, ulong *map_basep, uint *map_sizep, + uint *offsetp) +{ + struct fast_spi_regs *regs; + ulong bar, base, mmio_base; + + /* Special case to find mapping without probing the device */ + pci_x86_read_config(pdev, PCI_BASE_ADDRESS_0, &bar, PCI_SIZE_32); + mmio_base = bar & PCI_BASE_ADDRESS_MEM_MASK; + regs = (struct fast_spi_regs *)mmio_base; + base = fast_spi_get_bios_region(regs, map_sizep); + *map_basep = (u32)-*map_sizep - base; + *offsetp = base; + + return 0; +} + +int fast_spi_early_init(pci_dev_t pdev, ulong mmio_base) +{ + /* Program Temporary BAR for SPI */ + pci_x86_write_config(pdev, PCI_BASE_ADDRESS_0, + mmio_base | PCI_BASE_ADDRESS_SPACE_MEMORY, + PCI_SIZE_32); + + /* Enable Bus Master and MMIO Space */ + pci_x86_clrset_config(pdev, PCI_COMMAND, 0, PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY, PCI_SIZE_8); + + /* + * Disable the BIOS write protect so write commands are allowed. + * Enable Prefetching and caching. + */ + pci_x86_clrset_config(pdev, SPIBAR_BIOS_CONTROL, + SPIBAR_BIOS_CONTROL_EISS | + SPIBAR_BIOS_CONTROL_CACHE_DISABLE, + SPIBAR_BIOS_CONTROL_WPD | + SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE, PCI_SIZE_8); + + return 0; +} diff --git a/arch/x86/cpu/intel_common/lpss.c b/arch/x86/cpu/intel_common/lpss.c new file mode 100644 index 0000000..26a2d2d --- /dev/null +++ b/arch/x86/cpu/intel_common/lpss.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Special driver to handle of-platdata + * + * Copyright 2019 Google LLC + * + * Some code from coreboot lpss.c + */ + +#include <common.h> +#include <dm.h> +#include <pci.h> +#include <asm/io.h> +#include <asm/lpss.h> + +enum { + LPSS_RESET_CTL_REG = 0x204, + + /* + * Bit 1:0 controls LPSS controller reset. + * + * 00 ->LPSS Host Controller is in reset (Reset Asserted) + * 01/10 ->Reserved + * 11 ->LPSS Host Controller is NOT at reset (Reset Released) + */ + LPSS_CNT_RST_RELEASE = 3, + + /* Power management control and status register */ + PME_CTRL_STATUS = 0x84, + + /* Bit 1:0 Powerstate, controls D0 and D3 state */ + POWER_STATE_MASK = 3, +}; + +/* Take controller out of reset */ +void lpss_reset_release(void *regs) +{ + writel(LPSS_CNT_RST_RELEASE, regs + LPSS_RESET_CTL_REG); +} + +void lpss_set_power_state(struct udevice *dev, enum lpss_pwr_state state) +{ + dm_pci_clrset_config8(dev, PME_CTRL_STATUS, POWER_STATE_MASK, state); +} diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c index 3adc155..ed9938f 100644 --- a/arch/x86/cpu/irq.c +++ b/arch/x86/cpu/irq.c @@ -350,14 +350,6 @@ int irq_router_probe(struct udevice *dev) return 0; } -ulong write_pirq_routing_table(ulong addr) -{ - if (!gd->arch.pirq_routing_table) - return addr; - - return copy_pirq_routing_table(addr, gd->arch.pirq_routing_table); -} - static const struct udevice_id irq_router_ids[] = { { .compatible = "intel,irq-router" }, { } @@ -370,8 +362,3 @@ U_BOOT_DRIVER(irq_router_drv) = { .probe = irq_router_probe, .priv_auto_alloc_size = sizeof(struct irq_router), }; - -UCLASS_DRIVER(irq) = { - .id = UCLASS_IRQ, - .name = "irq", -}; diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c index 51ca4ad..cf34f94 100644 --- a/arch/x86/cpu/ivybridge/sdram.c +++ b/arch/x86/cpu/ivybridge/sdram.c @@ -116,7 +116,7 @@ static int prepare_mrc_cache(struct pei_data *pei_data) ret = read_seed_from_cmos(pei_data); if (ret) return ret; - ret = mrccache_get_region(NULL, &entry); + ret = mrccache_get_region(MRC_TYPE_NORMAL, NULL, &entry); if (ret) return ret; mrc_cache = mrccache_find_current(&entry); @@ -538,12 +538,14 @@ int dram_init(void) /* S3 resume: don't save scrambler seed or MRC data */ if (pei_data->boot_mode != PEI_BOOT_RESUME) { + struct mrc_output *mrc = &gd->arch.mrc[MRC_TYPE_NORMAL]; + /* * This will be copied to SDRAM in reserve_arch(), then written * to SPI flash in mrccache_save() */ - gd->arch.mrc_output = (char *)pei_data->mrc_output; - gd->arch.mrc_output_len = pei_data->mrc_output_len; + mrc->buf = (char *)pei_data->mrc_output; + mrc->len = pei_data->mrc_output_len; ret = write_seeds_to_cmos(pei_data); if (ret) debug("Failed to write seeds to CMOS: %d\n", ret); diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c index fefbf8f..7b09f90 100644 --- a/arch/x86/cpu/mp_init.c +++ b/arch/x86/cpu/mp_init.c @@ -418,69 +418,6 @@ static int init_bsp(struct udevice **devp) return 0; } -#ifdef CONFIG_QFW -static int qemu_cpu_fixup(void) -{ - int ret; - int cpu_num; - int cpu_online; - struct udevice *dev, *pdev; - struct cpu_platdata *plat; - char *cpu; - - /* first we need to find '/cpus' */ - for (device_find_first_child(dm_root(), &pdev); - pdev; - device_find_next_child(&pdev)) { - if (!strcmp(pdev->name, "cpus")) - break; - } - if (!pdev) { - printf("unable to find cpus device\n"); - return -ENODEV; - } - - /* calculate cpus that are already bound */ - cpu_num = 0; - for (uclass_find_first_device(UCLASS_CPU, &dev); - dev; - uclass_find_next_device(&dev)) { - cpu_num++; - } - - /* get actual cpu number */ - cpu_online = qemu_fwcfg_online_cpus(); - if (cpu_online < 0) { - printf("unable to get online cpu number: %d\n", cpu_online); - return cpu_online; - } - - /* bind addtional cpus */ - dev = NULL; - for (; cpu_num < cpu_online; cpu_num++) { - /* - * allocate device name here as device_bind_driver() does - * not copy device name, 8 bytes are enough for - * sizeof("cpu@") + 3 digits cpu number + '\0' - */ - cpu = malloc(8); - if (!cpu) { - printf("unable to allocate device name\n"); - return -ENOMEM; - } - sprintf(cpu, "cpu@%d", cpu_num); - ret = device_bind_driver(pdev, "cpu_qemu", cpu, &dev); - if (ret) { - printf("binding cpu@%d failed: %d\n", cpu_num, ret); - return ret; - } - plat = dev_get_parent_platdata(dev); - plat->cpu_id = cpu_num; - } - return 0; -} -#endif - int mp_init(struct mp_params *p) { int num_aps; @@ -494,11 +431,11 @@ int mp_init(struct mp_params *p) if (ret) return ret; -#ifdef CONFIG_QFW - ret = qemu_cpu_fixup(); - if (ret) - return ret; -#endif + if (IS_ENABLED(CONFIG_QFW)) { + ret = qemu_cpu_fixup(); + if (ret) + return ret; + } ret = init_bsp(&cpu); if (ret) { diff --git a/arch/x86/cpu/qfw_cpu.c b/arch/x86/cpu/qfw_cpu.c new file mode 100644 index 0000000..49e9dfc --- /dev/null +++ b/arch/x86/cpu/qfw_cpu.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Google, Inc + */ + +#include <common.h> +#include <cpu.h> +#include <dm.h> +#include <qfw.h> +#include <dm/lists.h> +#include <dm/uclass-internal.h> +#include <dm/root.h> + +int qemu_cpu_fixup(void) +{ + int ret; + int cpu_num; + int cpu_online; + struct udevice *dev, *pdev; + struct cpu_platdata *plat; + char *cpu; + + /* first we need to find '/cpus' */ + for (device_find_first_child(dm_root(), &pdev); + pdev; + device_find_next_child(&pdev)) { + if (!strcmp(pdev->name, "cpus")) + break; + } + if (!pdev) { + printf("unable to find cpus device\n"); + return -ENODEV; + } + + /* calculate cpus that are already bound */ + cpu_num = 0; + for (uclass_find_first_device(UCLASS_CPU, &dev); + dev; + uclass_find_next_device(&dev)) { + cpu_num++; + } + + /* get actual cpu number */ + cpu_online = qemu_fwcfg_online_cpus(); + if (cpu_online < 0) { + printf("unable to get online cpu number: %d\n", cpu_online); + return cpu_online; + } + + /* bind addtional cpus */ + dev = NULL; + for (; cpu_num < cpu_online; cpu_num++) { + /* + * allocate device name here as device_bind_driver() does + * not copy device name, 8 bytes are enough for + * sizeof("cpu@") + 3 digits cpu number + '\0' + */ + cpu = malloc(8); + if (!cpu) { + printf("unable to allocate device name\n"); + return -ENOMEM; + } + sprintf(cpu, "cpu@%d", cpu_num); + ret = device_bind_driver(pdev, "cpu_qemu", cpu, &dev); + if (ret) { + printf("binding cpu@%d failed: %d\n", cpu_num, ret); + return ret; + } + plat = dev_get_parent_platdata(dev); + plat->cpu_id = cpu_num; + } + return 0; +} diff --git a/arch/x86/cpu/quark/dram.c b/arch/x86/cpu/quark/dram.c index 995e119..2bf90dc 100644 --- a/arch/x86/cpu/quark/dram.c +++ b/arch/x86/cpu/quark/dram.c @@ -24,7 +24,7 @@ static __maybe_unused int prepare_mrc_cache(struct mrc_params *mrc_params) struct mrc_region entry; int ret; - ret = mrccache_get_region(NULL, &entry); + ret = mrccache_get_region(MRC_TYPE_NORMAL, NULL, &entry); if (ret) return ret; @@ -154,9 +154,11 @@ int dram_init(void) #ifdef CONFIG_ENABLE_MRC_CACHE cache = malloc(sizeof(struct mrc_timings)); if (cache) { + struct mrc_output *mrc = &gd->arch.mrc[MRC_TYPE_NORMAL]; + memcpy(cache, &mrc_params.timings, sizeof(struct mrc_timings)); - gd->arch.mrc_output = cache; - gd->arch.mrc_output_len = sizeof(struct mrc_timings); + mrc->buf = cache; + mrc->len = sizeof(struct mrc_timings); } #endif diff --git a/arch/x86/cpu/slimbootloader/Kconfig b/arch/x86/cpu/slimbootloader/Kconfig index 3ea4c99..58a9ca0 100644 --- a/arch/x86/cpu/slimbootloader/Kconfig +++ b/arch/x86/cpu/slimbootloader/Kconfig @@ -17,3 +17,4 @@ config SYS_SLIMBOOTLOADER imply USB_EHCI_HCD imply USB_XHCI_HCD imply E1000 + imply X86_TSC_READ_BASE diff --git a/arch/x86/cpu/u-boot-spl.lds b/arch/x86/cpu/u-boot-spl.lds index c1e9bfb..e6c2289 100644 --- a/arch/x86/cpu/u-boot-spl.lds +++ b/arch/x86/cpu/u-boot-spl.lds @@ -17,7 +17,10 @@ SECTIONS . = IMAGE_TEXT_BASE; /* Location of bootcode in flash */ __text_start = .; - .text : { *(.text*); } + .text : { + __image_copy_start = .; + *(.text*); + } . = ALIGN(4); |