diff options
Diffstat (limited to 'arch/arm/dts/sun8i-a23-a33.dtsi')
| -rw-r--r-- | arch/arm/dts/sun8i-a23-a33.dtsi | 308 |
1 files changed, 245 insertions, 63 deletions
diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index 44f3cad..a42fac6 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-a23-a33-ccu.h> @@ -51,13 +49,15 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; chosen { #address-cells = <1>; #size-cells = <1>; ranges; - simplefb_lcd: framebuffer@0 { + simplefb_lcd: framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -68,6 +68,12 @@ }; }; + de: display-engine { + /* compatible gets set in SoC specific dtsi file */ + allwinner,pipelines = <&fe0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -118,12 +124,34 @@ }; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + system-control@1c00000 { + compatible = "allwinner,sun8i-a23-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x80000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-a23-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; @@ -133,6 +161,60 @@ #dma-cells = <1>; }; + nfc: nand-controller@1c03000 { + compatible = "allwinner,sun8i-a23-nand-controller"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + dmas = <&dma 5>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tcon0: lcd-controller@1c0c000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 12>; + clocks = <&ccu CLK_BUS_LCD>, + <&ccu CLK_LCD_CH0>, + <&ccu 13>; + clock-names = "ahb", + "tcon-ch0", + "lvds-alt"; + clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; + resets = <&ccu RST_BUS_LCD>, + <&ccu RST_BUS_LVDS>; + reset-names = "lcd", + "lvds"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + reg = <0>; + + tcon0_in_drc0: endpoint { + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + reg = <1>; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -147,6 +229,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -190,21 +274,6 @@ #size-cells = <0>; }; - nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_NAND>; - reset-names = "ahb"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - usb_otg: usb@1c19000 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c19000 0x0400>; @@ -215,6 +284,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -276,22 +346,30 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - uart0_pins_a: uart0@0 { - pins = "PF2", "PF4"; - function = "uart0"; + i2c0_pins: i2c0-pins { + pins = "PH2", "PH3"; + function = "i2c0"; }; - uart1_pins_a: uart1@0 { - pins = "PG6", "PG7"; - function = "uart1"; + i2c1_pins: i2c1-pins { + pins = "PH4", "PH5"; + function = "i2c1"; }; - uart1_pins_cts_rts_a: uart1-cts-rts@0 { - pins = "PG8", "PG9"; - function = "uart1"; + i2c2_pins: i2c2-pins { + pins = "PE12", "PE13"; + function = "i2c2"; }; - mmc0_pins_a: mmc0@0 { + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; + + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -299,7 +377,7 @@ bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pg_pins: mmc1-pg-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -307,7 +385,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -324,61 +402,53 @@ function = "nand0"; }; - nand_pins_cs0: nand-pins-cs0 { + nand_cs0_pin: nand-cs0-pin { pins = "PC4"; function = "nand0"; bias-pull-up; }; - nand_pins_cs1: nand-pins-cs1 { + nand_cs1_pin: nand-cs1-pin { pins = "PC3"; function = "nand0"; bias-pull-up; }; - nand_pins_rb0: nand-pins-rb0 { + nand_rb0_pin: nand-rb0-pin { pins = "PC6"; function = "nand0"; bias-pull-up; }; - nand_pins_rb1: nand-pins-rb1 { + nand_rb1_pin: nand-rb1-pin { pins = "PC7"; function = "nand0"; bias-pull-up; }; - pwm0_pins: pwm0 { + pwm0_pin: pwm0-pin { pins = "PH0"; function = "pwm0"; }; - i2c0_pins_a: i2c0@0 { - pins = "PH2", "PH3"; - function = "i2c0"; - }; - - i2c1_pins_a: i2c1@0 { - pins = "PH4", "PH5"; - function = "i2c1"; + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; }; - i2c2_pins_a: i2c2@0 { - pins = "PE12", "PE13"; - function = "i2c2"; + uart1_pg_pins: uart1-pg-pins { + pins = "PG6", "PG7"; + function = "uart1"; }; - lcd_rgb666_pins: lcd-rgb666@0 { - pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - function = "lcd0"; + uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins { + pins = "PG8", "PG9"; + function = "uart1"; }; }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -389,6 +459,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; pwm: pwm@1c21400 { @@ -477,6 +548,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -488,6 +561,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -499,6 +574,8 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -532,7 +609,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -542,17 +619,104 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + fe0: display-frontend@1e00000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e00000 0x20000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_FE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + reg = <1>; + + fe0_out_be0: endpoint { + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e60000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_BE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + reg = <0>; + + be0_in_fe0: endpoint { + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + reg = <1>; + + be0_out_drc0: endpoint { + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@1e70000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, + <&ccu CLK_DRAM_DRC>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_DRC>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + reg = <0>; + + drc0_in_be0: endpoint { + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + reg = <1>; + + drc0_out_tcon0: endpoint { + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + compatible = "allwinner,sun8i-a23-rtc"; + reg = <0x01f00000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clock-output-names = "osc32k"; + clock-output-names = "osc32k", "osc32k-out"; clocks = <&ext_osc32k>; #clock-cells = <1>; }; - nmi_intc: interrupt-controller@1f00c00 { + r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; @@ -624,6 +788,20 @@ status = "disabled"; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun8i-a23-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + clocks = <&apb0_gates 6>; + resets = <&apb0_rst 6>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -634,18 +812,22 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <0>; #gpio-cells = <3>; - r_rsb_pins: r_rsb { + r_i2c_pins: r-i2c-pins { + pins = "PL0", "PL1"; + function = "s_i2c"; + bias-pull-up; + }; + + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; drive-strength = <20>; bias-pull-up; }; - r_uart_pins_a: r_uart@0 { + r_uart_pins_a: r-uart-pins { pins = "PL2", "PL3"; function = "s_uart"; }; |