diff options
Diffstat (limited to 'arch/arm/dts/sun50i-a64-teres-i.dts')
| -rw-r--r-- | arch/arm/dts/sun50i-a64-teres-i.dts | 138 |
1 files changed, 125 insertions, 13 deletions
diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts index c455b24..f5df5f7 100644 --- a/arch/arm/dts/sun50i-a64-teres-i.dts +++ b/arch/arm/dts/sun50i-a64-teres-i.dts @@ -1,13 +1,11 @@ -/* - * Copyright (C) Harald Geyer <harald@ccbib.org> - * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com> - * - * SPDX-License-Identifier: (GPL-2.0 OR MIT) - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) Harald Geyer <harald@ccbib.org> +// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -21,6 +19,15 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 0>; + power-supply = <®_dcdc1>; + brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>; + default-brightness-level = <5>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + }; + chosen { stdout-path = "serial0:115200n8"; @@ -70,6 +77,45 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */ + sound-name-prefix = "Speaker Amp"; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; }; &ehci1 { @@ -77,14 +123,31 @@ }; -/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline) - * driver for this chip at the moment, the bootloader initializes it. - * However it can be accessed with the i2c-dev driver from user space. - */ &i2c0 { clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_dldo3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + anx6345_in: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + }; + }; +}; + +&mixer0 { status = "okay"; }; @@ -131,6 +194,10 @@ status = "okay"; }; +&pwm { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -145,6 +212,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <2800000>; @@ -239,7 +314,7 @@ }; /* - * The A64 chip cannot work without this regulator off, although + * The A64 chip cannot work with this regulator off, although * it seems to be only driving the AR100 core. * Maybe we don't still know well about CPUs domain. */ @@ -258,6 +333,43 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Headset Microphone", + "Microphone", "Internal Microphone", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Internal Microphone", "MBIAS", + "MIC1", "Internal Microphone", + "Headset Microphone", "HBIAS", + "MIC2", "Headset Microphone"; + status = "okay"; +}; + +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + + status = "okay"; +}; + +&tcon0_out { + tcon0_out_anx6345: endpoint@0 { + reg = <0>; + remote-endpoint = <&anx6345_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; |