1 files changed, 0 insertions, 100 deletions
diff --git a/arch/arm/dts/meson-gxbb-p200.dts b/arch/arm/dts/meson-gxbb-p200.dts
deleted file mode 100644
index 3c93d18..0000000
--- a/arch/arm/dts/meson-gxbb-p200.dts
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Andreas Färber
- * Copyright (c) 2016 BayLibre, Inc.
- * Author: Kevin Hilman <khilman@kernel.org>
- */
-
-/dts-v1/;
-
-#include "meson-gxbb-p20x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "amlogic,p200", "amlogic,meson-gxbb";
-	model = "Amlogic Meson GXBB P200 Development Board";
-
-	avdd18_usb_adc: regulator-avdd18_usb_adc {
-		compatible = "regulator-fixed";
-		regulator-name = "AVDD18_USB_ADC";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	adc_keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-
-		button-home {
-			label = "Home";
-			linux,code = <KEY_HOME>;
-			press-threshold-microvolt = <900000>; /* 50% */
-		};
-
-		button-esc {
-			label = "Esc";
-			linux,code = <KEY_ESC>;
-			press-threshold-microvolt = <684000>; /* 38% */
-		};
-
-		button-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			press-threshold-microvolt = <468000>; /* 26% */
-		};
-
-		button-down {
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-			press-threshold-microvolt = <252000>; /* 14% */
-		};
-
-		button-menu {
-			label = "Menu";
-			linux,code = <KEY_MENU>;
-			press-threshold-microvolt = <0>; /* 0% */
-		};
-	};
-};
-
-&ethmac {
-	status = "okay";
-	pinctrl-0 = <&eth_rgmii_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&eth_phy0>;
-	phy-mode = "rgmii";
-
-	amlogic,tx-delay-ns = <2>;
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eth_phy0: ethernet-phy@3 {
-			/* Micrel KSZ9031 (0x00221620) */
-			reg = <3>;
-
-			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
-			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
-
-			interrupt-parent = <&gpio_intc>;
-			/* MAC_INTR on GPIOZ_15 */
-			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
-
-&i2c_B {
-	status = "okay";
-	pinctrl-0 = <&i2c_b_pins>;
-	pinctrl-names = "default";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&avdd18_usb_adc>;
-};