diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 165 |
1 files changed, 0 insertions, 165 deletions
@@ -2134,171 +2134,6 @@ The following options need to be configured: A better solution is to properly configure the firewall, but sometimes that is not allowed. -- Show boot progress: - CONFIG_SHOW_BOOT_PROGRESS - - Defining this option allows to add some board- - specific code (calling a user-provided function - "show_boot_progress(int)") that enables you to show - the system's boot progress on some display (for - example, some LED's) on your board. At the moment, - the following checkpoints are implemented: - - -Legacy uImage format: - - Arg Where When - 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number - 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum - 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum - 4 common/cmd_bootm.c Image data has correct checksum - -4 common/cmd_bootm.c Image is for unsupported architecture - 5 common/cmd_bootm.c Architecture check OK - -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) - 6 common/cmd_bootm.c Image Type check OK - -6 common/cmd_bootm.c gunzip uncompression error - -7 common/cmd_bootm.c Unimplemented compression type - 7 common/cmd_bootm.c Uncompression OK - 8 common/cmd_bootm.c No uncompress/copy overwrite error - -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) - - 9 common/image.c Start initial ramdisk verification - -10 common/image.c Ramdisk header has bad magic number - -11 common/image.c Ramdisk header has bad checksum - 10 common/image.c Ramdisk header is OK - -12 common/image.c Ramdisk data has bad checksum - 11 common/image.c Ramdisk data has correct checksum - 12 common/image.c Ramdisk verification complete, start loading - -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) - 13 common/image.c Start multifile image verification - 14 common/image.c No initial ramdisk, no multifile, continue. - - 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS - - -30 arch/powerpc/lib/board.c Fatal error, hang the system - -31 post/post.c POST test failed, detected by post_output_backlog() - -32 post/post.c POST test failed, detected by post_run_single() - - 34 common/cmd_doc.c before loading a Image from a DOC device - -35 common/cmd_doc.c Bad usage of "doc" command - 35 common/cmd_doc.c correct usage of "doc" command - -36 common/cmd_doc.c No boot device - 36 common/cmd_doc.c correct boot device - -37 common/cmd_doc.c Unknown Chip ID on boot device - 37 common/cmd_doc.c correct chip ID found, device available - -38 common/cmd_doc.c Read Error on boot device - 38 common/cmd_doc.c reading Image header from DOC device OK - -39 common/cmd_doc.c Image header has bad magic number - 39 common/cmd_doc.c Image header has correct magic number - -40 common/cmd_doc.c Error reading Image from DOC device - 40 common/cmd_doc.c Image header has correct magic number - 41 common/cmd_ide.c before loading a Image from a IDE device - -42 common/cmd_ide.c Bad usage of "ide" command - 42 common/cmd_ide.c correct usage of "ide" command - -43 common/cmd_ide.c No boot device - 43 common/cmd_ide.c boot device found - -44 common/cmd_ide.c Device not available - 44 common/cmd_ide.c Device available - -45 common/cmd_ide.c wrong partition selected - 45 common/cmd_ide.c partition selected - -46 common/cmd_ide.c Unknown partition table - 46 common/cmd_ide.c valid partition table found - -47 common/cmd_ide.c Invalid partition type - 47 common/cmd_ide.c correct partition type - -48 common/cmd_ide.c Error reading Image Header on boot device - 48 common/cmd_ide.c reading Image Header from IDE device OK - -49 common/cmd_ide.c Image header has bad magic number - 49 common/cmd_ide.c Image header has correct magic number - -50 common/cmd_ide.c Image header has bad checksum - 50 common/cmd_ide.c Image header has correct checksum - -51 common/cmd_ide.c Error reading Image from IDE device - 51 common/cmd_ide.c reading Image from IDE device OK - 52 common/cmd_nand.c before loading a Image from a NAND device - -53 common/cmd_nand.c Bad usage of "nand" command - 53 common/cmd_nand.c correct usage of "nand" command - -54 common/cmd_nand.c No boot device - 54 common/cmd_nand.c boot device found - -55 common/cmd_nand.c Unknown Chip ID on boot device - 55 common/cmd_nand.c correct chip ID found, device available - -56 common/cmd_nand.c Error reading Image Header on boot device - 56 common/cmd_nand.c reading Image Header from NAND device OK - -57 common/cmd_nand.c Image header has bad magic number - 57 common/cmd_nand.c Image header has correct magic number - -58 common/cmd_nand.c Error reading Image from NAND device - 58 common/cmd_nand.c reading Image from NAND device OK - - -60 common/env_common.c Environment has a bad CRC, using default - - 64 net/eth.c starting with Ethernet configuration. - -64 net/eth.c no Ethernet found. - 65 net/eth.c Ethernet found. - - -80 common/cmd_net.c usage wrong - 80 common/cmd_net.c before calling net_loop() - -81 common/cmd_net.c some error in net_loop() occurred - 81 common/cmd_net.c net_loop() back without error - -82 common/cmd_net.c size == 0 (File with size 0 loaded) - 82 common/cmd_net.c trying automatic boot - 83 common/cmd_net.c running "source" command - -83 common/cmd_net.c some error in automatic boot or "source" command - 84 common/cmd_net.c end without errors - -FIT uImage format: - - Arg Where When - 100 common/cmd_bootm.c Kernel FIT Image has correct format - -100 common/cmd_bootm.c Kernel FIT Image has incorrect format - 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration - -101 common/cmd_bootm.c Can't get configuration for kernel subimage - 102 common/cmd_bootm.c Kernel unit name specified - -103 common/cmd_bootm.c Can't get kernel subimage node offset - 103 common/cmd_bootm.c Found configuration node - 104 common/cmd_bootm.c Got kernel subimage node offset - -104 common/cmd_bootm.c Kernel subimage hash verification failed - 105 common/cmd_bootm.c Kernel subimage hash verification OK - -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture - 106 common/cmd_bootm.c Architecture check OK - -106 common/cmd_bootm.c Kernel subimage has wrong type - 107 common/cmd_bootm.c Kernel subimage type OK - -107 common/cmd_bootm.c Can't get kernel subimage data/size - 108 common/cmd_bootm.c Got kernel subimage data/size - -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) - -109 common/cmd_bootm.c Can't get kernel subimage type - -110 common/cmd_bootm.c Can't get kernel subimage comp - -111 common/cmd_bootm.c Can't get kernel subimage os - -112 common/cmd_bootm.c Can't get kernel subimage load address - -113 common/cmd_bootm.c Image uncompress/copy overwrite error - - 120 common/image.c Start initial ramdisk verification - -120 common/image.c Ramdisk FIT image has incorrect format - 121 common/image.c Ramdisk FIT image has correct format - 122 common/image.c No ramdisk subimage unit name, using configuration - -122 common/image.c Can't get configuration for ramdisk subimage - 123 common/image.c Ramdisk unit name specified - -124 common/image.c Can't get ramdisk subimage node offset - 125 common/image.c Got ramdisk subimage node offset - -125 common/image.c Ramdisk subimage hash verification failed - 126 common/image.c Ramdisk subimage hash verification OK - -126 common/image.c Ramdisk subimage for unsupported architecture - 127 common/image.c Architecture check OK - -127 common/image.c Can't get ramdisk subimage data/size - 128 common/image.c Got ramdisk subimage data/size - 129 common/image.c Can't get ramdisk load address - -129 common/image.c Got ramdisk load address - - -130 common/cmd_doc.c Incorrect FIT image format - 131 common/cmd_doc.c FIT image format OK - - -140 common/cmd_ide.c Incorrect FIT image format - 141 common/cmd_ide.c FIT image format OK - - -150 common/cmd_nand.c Incorrect FIT image format - 151 common/cmd_nand.c FIT image format OK - -- Standalone program support: CONFIG_STANDALONE_LOAD_ADDR This option defines a board specific value for the |