aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README4
-rw-r--r--arch/arm/lib/board.c3
-rw-r--r--doc/README.fdt-control12
3 files changed, 19 insertions, 0 deletions
diff --git a/README b/README
index 558f011..a3b62e1 100644
--- a/README
+++ b/README
@@ -3499,6 +3499,10 @@ List of environment variables (most likely not complete):
add the information it needs into it, and the memory
must be accessible by the kernel.
+ fdtcontroladdr- if set this is the address of the control flattened
+ device tree used by U-Boot when CONFIG_OF_CONTROL is
+ defined.
+
i2cfast - (PPC405GP|PPC405EP only)
if set to 'y' configures Linux I2C driver for fast
mode (400kHZ). This environment variable is used in
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index bd6d4e3..bae2892 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -286,6 +286,9 @@ void board_init_f(ulong bootflag)
/* FDT is at end of image */
gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE);
#endif
+ /* Allow the early environment to override the fdt address */
+ gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
+ (uintptr_t)gd->fdt_blob);
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
if ((*init_fnc_ptr)() != 0) {
diff --git a/doc/README.fdt-control b/doc/README.fdt-control
index 3f8bb5a..85bda03 100644
--- a/doc/README.fdt-control
+++ b/doc/README.fdt-control
@@ -144,6 +144,18 @@ and then flash image.bin onto your board.
You cannot use both of these options at the same time.
+If you wish to put the fdt at a different address in memory, you can
+define the "fdtcontroladdr" environment variable. This is the hex
+address of the fdt binary blob, and will override either of the options.
+Be aware that this environment variable is checked prior to relocation,
+when only the compiled-in environment is available. Therefore it is not
+possible to define this variable in the saved SPI/NAND flash
+environment, for example (it will be ignored).
+
+To use this, put something like this in your board header file:
+
+#define CONFIG_EXTRA_ENV_SETTINGS "fdtcontroladdr=10000\0"
+
Limitations
-----------