18 files changed, 634 insertions, 699 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 20434dc..7c5012ac 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -825,6 +825,9 @@ config ARCH_ZYNQ
 	select SPL_SEPARATE_BSS if SPL
 	select DM_USB if USB
 	select BLK
+	select CLK
+	select SPL_CLK
+	select CLK_ZYNQ
 
 config ARCH_ZYNQMP
 	bool "Support Xilinx ZynqMP Platform"
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index fa9ee27..34fc6e5 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -248,12 +248,14 @@
 		};
 
 		slcr: slcr@f8000000 {
+			u-boot,dm-pre-reloc;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
+				u-boot,dm-pre-reloc;
 				#clock-cells = <1>;
 				compatible = "xlnx,ps7-clkc";
 				fclk-enable = <0>;
diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
index 8c54fce..7b11895 100644
--- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
@@ -8,13 +8,6 @@
 #ifndef _ASM_ARCH_SYS_PROTO_H
 #define _ASM_ARCH_SYS_PROTO_H
 
-#ifndef CONFIG_CLK_ZYNQMP
-/* Setup clk for network */
-static inline void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
-{
-}
-#endif
-
 int zynq_slcr_get_mio_pin_status(const char *periph);
 
 unsigned int zynqmp_get_silicon_version(void);
diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c
index 40383c1..1369cd0 100644
--- a/arch/arm/mach-zynq/clk.c
+++ b/arch/arm/mach-zynq/clk.c
@@ -4,645 +4,65 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
+#include <clk.h>
 #include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <dm.h>
 #include <asm/arch/clk.h>
 
-/* Board oscillator frequency */
-#ifndef CONFIG_ZYNQ_PS_CLK_FREQ
-# define CONFIG_ZYNQ_PS_CLK_FREQ	33333333UL
-#endif
-
-/* Register bitfield defines */
-#define PLLCTRL_FBDIV_MASK	0x7f000
-#define PLLCTRL_FBDIV_SHIFT	12
-#define PLLCTRL_BPFORCE_MASK	(1 << 4)
-#define PLLCTRL_PWRDWN_MASK	2
-#define PLLCTRL_PWRDWN_SHIFT	1
-#define PLLCTRL_RESET_MASK	1
-#define PLLCTRL_RESET_SHIFT	0
-
-#define ZYNQ_CLK_MAXDIV		0x3f
-#define CLK_CTRL_DIV1_SHIFT	20
-#define CLK_CTRL_DIV1_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
-#define CLK_CTRL_DIV0_SHIFT	8
-#define CLK_CTRL_DIV0_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
-#define CLK_CTRL_SRCSEL_SHIFT	4
-#define CLK_CTRL_SRCSEL_MASK	(0x3 << CLK_CTRL_SRCSEL_SHIFT)
-
-#define CLK_CTRL_DIV2X_SHIFT	26
-#define CLK_CTRL_DIV2X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT)
-#define CLK_CTRL_DIV3X_SHIFT	20
-#define CLK_CTRL_DIV3X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT)
-
-#define ZYNQ_CLKMUX_SEL_0	0
-#define ZYNQ_CLKMUX_SEL_1	1
-#define ZYNQ_CLKMUX_SEL_2	2
-#define ZYNQ_CLKMUX_SEL_3	3
-
 DECLARE_GLOBAL_DATA_PTR;
 
-struct clk;
-
-/**
- * struct zynq_clk_ops:
- * @set_rate:	Function pointer to set_rate() implementation
- * @get_rate:	Function pointer to get_rate() implementation
- */
-struct zynq_clk_ops {
-	int (*set_rate)(struct clk *clk, unsigned long rate);
-	unsigned long (*get_rate)(struct clk *clk);
-};
-
-/**
- * struct clk:
- * @name:	Clock name
- * @frequency:	Currenct frequency
- * @parent:	Parent clock
- * @flags:	Clock flags
- * @reg:	Clock control register
- * @ops:	Clock operations
- */
-struct clk {
-	char		*name;
-	unsigned long	frequency;
-	enum zynq_clk	parent;
-	unsigned int	flags;
-	u32		*reg;
-	struct zynq_clk_ops	ops;
+static const char * const clk_names[clk_max] = {
+	"armpll", "ddrpll", "iopll",
+	"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
+	"ddr2x", "ddr3x", "dci",
+	"lqspi", "smc", "pcap", "gem0", "gem1",
+	"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+	"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma",
+	"usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper",
+	"sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper",
+	"can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper",
+	"uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper",
+	"smc_aper", "swdt", "dbg_trc", "dbg_apb"
 };
-#define ZYNQ_CLK_FLAGS_HAS_2_DIVS	1
-
-static struct clk clks[clk_max];
-
-/**
- * __zynq_clk_cpu_get_parent() - Decode clock multiplexer
- * @srcsel:	Mux select value
- * Returns the clock identifier associated with the selected mux input.
- */
-static int __zynq_clk_cpu_get_parent(unsigned int srcsel)
-{
-	unsigned int ret;
-
-	switch (srcsel) {
-	case ZYNQ_CLKMUX_SEL_0:
-	case ZYNQ_CLKMUX_SEL_1:
-		ret = armpll_clk;
-		break;
-	case ZYNQ_CLKMUX_SEL_2:
-		ret = ddrpll_clk;
-		break;
-	case ZYNQ_CLKMUX_SEL_3:
-		ret = iopll_clk;
-		break;
-	default:
-		ret = armpll_clk;
-		break;
-	}
-
-	return ret;
-}
-
-/**
- * ddr2x_get_rate() - Get clock rate of DDR2x clock
- * @clk:	Clock handle
- * Returns the current clock rate of @clk.
- */
-static unsigned long ddr2x_get_rate(struct clk *clk)
-{
-	u32 clk_ctrl = readl(clk->reg);
-	u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
-
-	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
-}
-
-/**
- * ddr3x_get_rate() - Get clock rate of DDR3x clock
- * @clk:	Clock handle
- * Returns the current clock rate of @clk.
- */
-static unsigned long ddr3x_get_rate(struct clk *clk)
-{
-	u32 clk_ctrl = readl(clk->reg);
-	u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
-
-	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
-}
-
-static void init_ddr_clocks(void)
-{
-	u32 div0, div1;
-	unsigned long prate = zynq_clk_get_rate(ddrpll_clk);
-	u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
-
-	/* DDR2x */
-	clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl;
-	clks[ddr2x_clk].parent = ddrpll_clk;
-	clks[ddr2x_clk].name = "ddr_2x";
-	clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]);
-	clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate;
-
-	/* DDR3x */
-	clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl;
-	clks[ddr3x_clk].parent = ddrpll_clk;
-	clks[ddr3x_clk].name = "ddr_3x";
-	clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]);
-	clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate;
-
-	/* DCI */
-	clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
-	div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
-	clks[dci_clk].reg = &slcr_base->dci_clk_ctrl;
-	clks[dci_clk].parent = ddrpll_clk;
-	clks[dci_clk].frequency = DIV_ROUND_CLOSEST(
-			DIV_ROUND_CLOSEST(prate, div0), div1);
-	clks[dci_clk].name = "dci";
-
-	gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000;
-}
-
-static void init_cpu_clocks(void)
-{
-	int clk_621;
-	u32 reg, div, srcsel;
-	enum zynq_clk parent;
-
-	reg = readl(&slcr_base->arm_clk_ctrl);
-	clk_621 = readl(&slcr_base->clk_621_true) & 1;
-	div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-	parent = __zynq_clk_cpu_get_parent(srcsel);
-
-	/* cpu clocks */
-	clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl;
-	clks[cpu_6or4x_clk].parent = parent;
-	clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST(
-			zynq_clk_get_rate(parent), div);
-	clks[cpu_6or4x_clk].name = "cpu_6or4x";
-
-	clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl;
-	clks[cpu_3or2x_clk].parent = cpu_6or4x_clk;
-	clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2;
-	clks[cpu_3or2x_clk].name = "cpu_3or2x";
-
-	clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl;
-	clks[cpu_2x_clk].parent = cpu_6or4x_clk;
-	clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
-			(2 + clk_621);
-	clks[cpu_2x_clk].name = "cpu_2x";
-
-	clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl;
-	clks[cpu_1x_clk].parent = cpu_6or4x_clk;
-	clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
-			(4 + 2 * clk_621);
-	clks[cpu_1x_clk].name = "cpu_1x";
-}
-
-/**
- * periph_calc_two_divs() - Calculate clock dividers
- * @cur_rate:	Current clock rate
- * @tgt_rate:	Target clock rate
- * @prate:	Parent clock rate
- * @div0:	First divider (output)
- * @div1:	Second divider (output)
- * Returns the actual clock rate possible.
- *
- * Calculates clock dividers for clocks with two 6-bit dividers.
- */
-static unsigned long periph_calc_two_divs(unsigned long cur_rate,
-		unsigned long tgt_rate, unsigned long prate, u32 *div0,
-		u32 *div1)
-{
-	long err, best_err = (long)(~0UL >> 1);
-	unsigned long rate, best_rate = 0;
-	u32 d0, d1;
-
-	for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
-		for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
-			rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0),
-					d1);
-			err = abs(rate - tgt_rate);
-
-			if (err < best_err) {
-				*div0 = d0;
-				*div1 = d1;
-				best_err = err;
-				best_rate = rate;
-			}
-		}
-	}
-
-	return best_rate;
-}
-
-/**
- * zynq_clk_periph_set_rate() - Set clock rate
- * @clk:	Handle of the peripheral clock
- * @rate:	New clock rate
- * Sets the clock frequency of @clk to @rate. Returns zero on success.
- */
-static int zynq_clk_periph_set_rate(struct clk *clk,
-		unsigned long rate)
-{
-	u32 ctrl, div0 = 0, div1 = 0;
-	unsigned long prate, new_rate, cur_rate = clk->frequency;
-
-	ctrl = readl(clk->reg);
-	prate = zynq_clk_get_rate(clk->parent);
-	ctrl &= ~CLK_CTRL_DIV0_MASK;
-
-	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) {
-		ctrl &= ~CLK_CTRL_DIV1_MASK;
-		new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0,
-				&div1);
-		ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
-	} else {
-		div0 = DIV_ROUND_CLOSEST(prate, rate);
-		div0 &= ZYNQ_CLK_MAXDIV;
-		new_rate = DIV_ROUND_CLOSEST(rate, div0);
-	}
-
-	/* write new divs to hardware */
-	ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
-	writel(ctrl, clk->reg);
-
-	/* update frequency in clk framework */
-	clk->frequency = new_rate;
-
-	return 0;
-}
-
-/**
- * zynq_clk_periph_get_rate() - Get clock rate
- * @clk:	Handle of the peripheral clock
- * Returns the current clock rate of @clk.
- */
-static unsigned long zynq_clk_periph_get_rate(struct clk *clk)
-{
-	u32 clk_ctrl = readl(clk->reg);
-	u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	u32 div1 = 1;
-
-	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS)
-		div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
-
-	/* a register value of zero == division by 1 */
-	if (!div0)
-		div0 = 1;
-	if (!div1)
-		div1 = 1;
-
-	return
-		DIV_ROUND_CLOSEST(
-			DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0),
-			div1);
-}
-
-/**
- * __zynq_clk_periph_get_parent() - Decode clock multiplexer
- * @srcsel:	Mux select value
- * Returns the clock identifier associated with the selected mux input.
- */
-static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel)
-{
-	switch (srcsel) {
-	case ZYNQ_CLKMUX_SEL_0:
-	case ZYNQ_CLKMUX_SEL_1:
-		return iopll_clk;
-	case ZYNQ_CLKMUX_SEL_2:
-		return armpll_clk;
-	case ZYNQ_CLKMUX_SEL_3:
-		return ddrpll_clk;
-	default:
-		return 0;
-	}
-}
-
-/**
- * zynq_clk_periph_get_parent() - Decode clock multiplexer
- * @clk:	Clock handle
- * Returns the clock identifier associated with the selected mux input.
- */
-static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk)
-{
-	u32 clk_ctrl = readl(clk->reg);
-	u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-
-	return __zynq_clk_periph_get_parent(srcsel);
-}
-
-/**
- * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework
- * @clk:	Pointer to struct clk for the clock
- * @ctrl:	Clock control register
- * @name:	PLL name
- * @two_divs:	Indicates whether the clock features one or two dividers
- */
-static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, char *name,
-		bool two_divs)
-{
-	clk->name = name;
-	clk->reg = ctrl;
-	if (two_divs)
-		clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS;
-	clk->parent = zynq_clk_periph_get_parent(clk);
-	clk->frequency = zynq_clk_periph_get_rate(clk);
-	clk->ops.get_rate = zynq_clk_periph_get_rate;
-	clk->ops.set_rate = zynq_clk_periph_set_rate;
-
-	return 0;
-}
-
-static void init_periph_clocks(void)
-{
-	zynq_clk_register_periph_clk(&clks[gem0_clk], &slcr_base->gem0_clk_ctrl,
-				     "gem0", 1);
-	zynq_clk_register_periph_clk(&clks[gem1_clk], &slcr_base->gem1_clk_ctrl,
-				     "gem1", 1);
-
-	zynq_clk_register_periph_clk(&clks[smc_clk], &slcr_base->smc_clk_ctrl,
-				     "smc", 0);
-
-	zynq_clk_register_periph_clk(&clks[lqspi_clk],
-				     &slcr_base->lqspi_clk_ctrl, "lqspi", 0);
-
-	zynq_clk_register_periph_clk(&clks[sdio0_clk],
-				     &slcr_base->sdio_clk_ctrl, "sdio0", 0);
-	zynq_clk_register_periph_clk(&clks[sdio1_clk],
-				     &slcr_base->sdio_clk_ctrl, "sdio1", 0);
-
-	zynq_clk_register_periph_clk(&clks[spi0_clk], &slcr_base->spi_clk_ctrl,
-				     "spi0", 0);
-	zynq_clk_register_periph_clk(&clks[spi1_clk], &slcr_base->spi_clk_ctrl,
-				     "spi1", 0);
-
-	zynq_clk_register_periph_clk(&clks[uart0_clk],
-				     &slcr_base->uart_clk_ctrl, "uart0", 0);
-	zynq_clk_register_periph_clk(&clks[uart1_clk],
-				     &slcr_base->uart_clk_ctrl, "uart1", 0);
-
-	zynq_clk_register_periph_clk(&clks[dbg_trc_clk],
-				     &slcr_base->dbg_clk_ctrl, "dbg_trc", 0);
-	zynq_clk_register_periph_clk(&clks[dbg_apb_clk],
-				     &slcr_base->dbg_clk_ctrl, "dbg_apb", 0);
-
-	zynq_clk_register_periph_clk(&clks[pcap_clk],
-				     &slcr_base->pcap_clk_ctrl, "pcap", 0);
-
-	zynq_clk_register_periph_clk(&clks[fclk0_clk],
-				     &slcr_base->fpga0_clk_ctrl, "fclk0", 1);
-	zynq_clk_register_periph_clk(&clks[fclk1_clk],
-				     &slcr_base->fpga1_clk_ctrl, "fclk1", 1);
-	zynq_clk_register_periph_clk(&clks[fclk2_clk],
-				     &slcr_base->fpga2_clk_ctrl, "fclk2", 1);
-	zynq_clk_register_periph_clk(&clks[fclk3_clk],
-				     &slcr_base->fpga3_clk_ctrl, "fclk3", 1);
-}
-
-/**
- * zynq_clk_register_aper_clk() - Set up a APER clock with the framework
- * @clk:	Pointer to struct clk for the clock
- * @ctrl:	Clock control register
- * @name:	PLL name
- */
-static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl, char *name)
-{
-	clk->name = name;
-	clk->reg = ctrl;
-	clk->parent = cpu_1x_clk;
-	clk->frequency = zynq_clk_get_rate(clk->parent);
-}
-
-static void init_aper_clocks(void)
-{
-	zynq_clk_register_aper_clk(&clks[usb0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "usb0_aper");
-	zynq_clk_register_aper_clk(&clks[usb1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "usb1_aper");
-
-	zynq_clk_register_aper_clk(&clks[gem0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "gem0_aper");
-	zynq_clk_register_aper_clk(&clks[gem1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "gem1_aper");
-
-	zynq_clk_register_aper_clk(&clks[sdio0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "sdio0_aper");
-	zynq_clk_register_aper_clk(&clks[sdio1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "sdio1_aper");
-
-	zynq_clk_register_aper_clk(&clks[spi0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "spi0_aper");
-	zynq_clk_register_aper_clk(&clks[spi1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "spi1_aper");
-
-	zynq_clk_register_aper_clk(&clks[can0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "can0_aper");
-	zynq_clk_register_aper_clk(&clks[can1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "can1_aper");
-
-	zynq_clk_register_aper_clk(&clks[i2c0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "i2c0_aper");
-	zynq_clk_register_aper_clk(&clks[i2c1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "i2c1_aper");
-
-	zynq_clk_register_aper_clk(&clks[uart0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "uart0_aper");
-	zynq_clk_register_aper_clk(&clks[uart1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "uart1_aper");
-
-	zynq_clk_register_aper_clk(&clks[gpio_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "gpio_aper");
-
-	zynq_clk_register_aper_clk(&clks[lqspi_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "lqspi_aper");
-
-	zynq_clk_register_aper_clk(&clks[smc_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "smc_aper");
-}
-
-/**
- * __zynq_clk_pll_get_rate() - Get PLL rate
- * @addr:	Address of the PLL's control register
- * Returns the current PLL output rate.
- */
-static unsigned long __zynq_clk_pll_get_rate(u32 *addr)
-{
-	u32 reg, mul, bypass;
-
-	reg = readl(addr);
-	bypass = reg & PLLCTRL_BPFORCE_MASK;
-	if (bypass)
-		mul = 1;
-	else
-		mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
-
-	return CONFIG_ZYNQ_PS_CLK_FREQ * mul;
-}
-
-/**
- * zynq_clk_pll_get_rate() - Get PLL rate
- * @pll:	Handle of the PLL
- * Returns the current clock rate of @pll.
- */
-static unsigned long zynq_clk_pll_get_rate(struct clk *pll)
-{
-	return __zynq_clk_pll_get_rate(pll->reg);
-}
-
-/**
- * zynq_clk_register_pll() - Set up a PLL with the framework
- * @clk:	Pointer to struct clk for the PLL
- * @ctrl:	PLL control register
- * @name:	PLL name
- * @prate:	PLL input clock rate
- */
-static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, char *name,
-		unsigned long prate)
-{
-	clk->name = name;
-	clk->reg = ctrl;
-	clk->frequency = zynq_clk_pll_get_rate(clk);
-	clk->ops.get_rate = zynq_clk_pll_get_rate;
-}
-
-/**
- * clkid_2_register() - Get clock control register
- * @id:	Clock identifier of one of the PLLs
- * Returns the address of the requested PLL's control register.
- */
-static u32 *clkid_2_register(enum zynq_clk id)
-{
-	switch (id) {
-	case armpll_clk:
-		return &slcr_base->arm_pll_ctrl;
-	case ddrpll_clk:
-		return &slcr_base->ddr_pll_ctrl;
-	case iopll_clk:
-		return &slcr_base->io_pll_ctrl;
-	default:
-		return &slcr_base->io_pll_ctrl;
-	}
-}
-
-/* API */
-/**
- * zynq_clk_early_init() - Early init for the clock framework
- *
- * This function is called from before relocation and sets up the CPU clock
- * frequency in the global data struct.
- */
-void zynq_clk_early_init(void)
-{
-	u32 reg = readl(&slcr_base->arm_clk_ctrl);
-	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-	enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel);
-	u32 *pllreg = clkid_2_register(parent);
-	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
-
-	if (!div)
-		div = 1;
-
-	gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div);
-}
-
-/**
- * get_uart_clk() - Get UART input frequency
- * @dev_index:	UART ID
- * Returns UART input clock frequency in Hz.
- *
- * Compared to zynq_clk_get_rate() this function is designed to work before
- * relocation and can be called when the serial UART is set up.
- */
-unsigned long get_uart_clk(int dev_index)
-{
-	u32 reg = readl(&slcr_base->uart_clk_ctrl);
-	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-	enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel);
-	u32 *pllreg = clkid_2_register(parent);
-	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
-
-	if (!div)
-		div = 1;
-
-	return DIV_ROUND_CLOSEST(prate, div);
-}
 
 /**
- * set_cpu_clk_info() - Initialize clock framework
- * Always returns zero.
+ * set_cpu_clk_info() - Setup clock information
  *
  * This function is called from common code after relocation and sets up the
- * clock framework. The framework must not be used before this function had been
- * called.
+ * clock information.
  */
 int set_cpu_clk_info(void)
 {
-	zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl,
-			      "armpll", CONFIG_ZYNQ_PS_CLK_FREQ);
-	zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl,
-			      "ddrpll", CONFIG_ZYNQ_PS_CLK_FREQ);
-	zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl,
-			      "iopll", CONFIG_ZYNQ_PS_CLK_FREQ);
-
-	init_ddr_clocks();
-	init_cpu_clocks();
-	init_periph_clocks();
-	init_aper_clocks();
-
-	gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+	struct clk clk;
+	struct udevice *dev;
+	ulong rate;
+	int i, ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+		DM_GET_DRIVER(zynq_clk), &dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < 2; i++) {
+		clk.id = i ? ddr3x_clk : cpu_6or4x_clk;
+		ret = clk_request(dev, &clk);
+		if (ret < 0)
+			return ret;
+
+		rate = clk_get_rate(&clk) / 1000000;
+		if (i)
+			gd->bd->bi_ddr_freq = rate;
+		else
+			gd->bd->bi_arm_freq = rate;
+
+		clk_free(&clk);
+	}
 	gd->bd->bi_dsp_freq = 0;
 
 	return 0;
 }
 
 /**
- * zynq_clk_get_rate() - Get clock rate
- * @clk:	Clock identifier
- * Returns the current clock rate of @clk on success or zero for an invalid
- * clock id.
- */
-unsigned long zynq_clk_get_rate(enum zynq_clk clk)
-{
-	if (clk < 0 || clk >= clk_max)
-		return 0;
-
-	return clks[clk].frequency;
-}
-
-/**
- * zynq_clk_set_rate() - Set clock rate
- * @clk:	Clock identifier
- * @rate:	Requested clock rate
- * Passes on the return value from the clock's set_rate() function or negative
- * errno.
- */
-int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate)
-{
-	if (clk < 0 || clk >= clk_max)
-		return -ENODEV;
-
-	if (clks[clk].ops.set_rate)
-		return clks[clk].ops.set_rate(&clks[clk], rate);
-
-	return -ENXIO;
-}
-
-/**
- * zynq_clk_get_name() - Get clock name
- * @clk:	Clock identifier
- * Returns the name of @clk.
- */
-const char *zynq_clk_get_name(enum zynq_clk clk)
-{
-	return clks[clk].name;
-}
-
-/**
  * soc_clk_dump() - Print clock frequencies
  * Returns zero on success
  *
@@ -650,13 +70,35 @@ const char *zynq_clk_get_name(enum zynq_clk clk)
  */
 int soc_clk_dump(void)
 {
-	int i;
+	struct udevice *dev;
+	int i, ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+		DM_GET_DRIVER(zynq_clk), &dev);
+	if (ret)
+		return ret;
 
 	printf("clk\t\tfrequency\n");
 	for (i = 0; i < clk_max; i++) {
-		const char *name = zynq_clk_get_name(i);
-		if (name)
-			printf("%10s%20lu\n", name, zynq_clk_get_rate(i));
+		const char *name = clk_names[i];
+		if (name) {
+			struct clk clk;
+			unsigned long rate;
+
+			clk.id = i;
+			ret = clk_request(dev, &clk);
+			if (ret < 0)
+				return ret;
+
+			rate = clk_get_rate(&clk);
+
+			clk_free(&clk);
+
+			if (rate == (unsigned long)-ENOSYS)
+				printf("%10s%20s\n", name, "unknown");
+			else
+				printf("%10s%20lu\n", name, rate);
+		}
 	}
 
 	return 0;
diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c
index ba9171e..ee1c1a9 100644
--- a/arch/arm/mach-zynq/cpu.c
+++ b/arch/arm/mach-zynq/cpu.c
@@ -35,7 +35,6 @@ int arch_cpu_init(void)
 	writel(0xC, &slcr_base->ddr_urgent);
 #endif
 #endif
-	zynq_clk_early_init();
 	zynq_slcr_lock();
 
 	return 0;
diff --git a/arch/arm/mach-zynq/include/mach/clk.h b/arch/arm/mach-zynq/include/mach/clk.h
index 250c5bc..8a039ae 100644
--- a/arch/arm/mach-zynq/include/mach/clk.h
+++ b/arch/arm/mach-zynq/include/mach/clk.h
@@ -20,10 +20,4 @@ enum zynq_clk {
 	uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk,
 	smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
 
-void zynq_clk_early_init(void);
-int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate);
-unsigned long zynq_clk_get_rate(enum zynq_clk clk);
-const char *zynq_clk_get_name(enum zynq_clk clk);
-unsigned long get_uart_clk(int dev_id);
-
 #endif
diff --git a/arch/arm/mach-zynq/include/mach/sys_proto.h b/arch/arm/mach-zynq/include/mach/sys_proto.h
index 44c9b50..67238e7 100644
--- a/arch/arm/mach-zynq/include/mach/sys_proto.h
+++ b/arch/arm/mach-zynq/include/mach/sys_proto.h
@@ -10,7 +10,6 @@
 extern void zynq_slcr_lock(void);
 extern void zynq_slcr_unlock(void);
 extern void zynq_slcr_cpu_reset(void);
-extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate);
 extern void zynq_slcr_devcfg_disable(void);
 extern void zynq_slcr_devcfg_enable(void);
 extern u32 zynq_slcr_get_boot_mode(void);
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 2d3bf2a..2a207ae 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -9,7 +9,6 @@
 #include <malloc.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/clk.h>
 
 #define SLCR_LOCK_MAGIC		0x767B
 #define SLCR_UNLOCK_MAGIC	0xDF0D
@@ -124,34 +123,6 @@ void zynq_slcr_cpu_reset(void)
 	writel(1, &slcr_base->pss_rst_ctrl);
 }
 
-/* Setup clk for network */
-void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
-{
-	int ret;
-
-	zynq_slcr_unlock();
-
-	if (gem_id > 1) {
-		printf("Non existing GEM id %d\n", gem_id);
-		goto out;
-	}
-
-	ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
-	if (ret)
-		goto out;
-
-	if (gem_id) {
-		/* Configure GEM_RCLK_CTRL */
-		writel(1, &slcr_base->gem1_rclk_ctrl);
-	} else {
-		/* Configure GEM_RCLK_CTRL */
-		writel(1, &slcr_base->gem0_rclk_ctrl);
-	}
-	udelay(100000);
-out:
-	zynq_slcr_lock();
-}
-
 void zynq_slcr_devcfg_disable(void)
 {
 	u32 reg_val;
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index 8ff82dc..b1bb3b8 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -1,4 +1,7 @@
 /*
+ * Copyright (C) 2017 Weidmüller Interface GmbH & Co. KG
+ * Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
+ *
  * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
  * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
  *
@@ -25,8 +28,10 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <clk.h>
 #include <common.h>
 #include <div64.h>
+#include <dm.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/clk.h>
@@ -56,6 +61,24 @@ int timer_init(void)
 			(TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
 			SCUTIMER_CONTROL_ENABLE_MASK;
 
+	struct udevice *dev;
+	struct clk clk;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_CLK,
+		DM_GET_DRIVER(zynq_clk), &dev);
+	if (ret)
+		return ret;
+
+	clk.id = cpu_6or4x_clk;
+	ret = clk_request(dev, &clk);
+	if (ret < 0)
+		return ret;
+
+	gd->cpu_clk = clk_get_rate(&clk);
+
+	clk_free(&clk);
+
 	gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
 
 	/* Load the timer counter register */
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 335ef9e..5ca958c 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -28,6 +28,14 @@ config CLK_BOSTON
 	help
 	  Enable this to support the clocks
 
+config CLK_ZYNQ
+	bool "Enable clock driver support for Zynq"
+	depends on CLK && ARCH_ZYNQ
+	default y
+	help
+	  This clock driver adds support for clock realted settings for
+	  Zynq platform.
+
 config CLK_ZYNQMP
 	bool "Enable clock driver support for ZynqMP"
 	depends on ARCH_ZYNQMP
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 884c21c..40df3cd 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
 obj-$(CONFIG_SANDBOX) += clk_sandbox.o
 obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o
 obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
+obj-$(CONFIG_CLK_ZYNQ) += clk_zynq.o
 obj-$(CONFIG_CLK_ZYNQMP) += clk_zynqmp.o
 
 obj-y += tegra/
diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c
new file mode 100644
index 0000000..6edc4dc
--- /dev/null
+++ b/drivers/clk/clk_zynq.c
@@ -0,0 +1,488 @@
+/*
+ * Copyright (C) 2017 Weidmüller Interface GmbH & Co. KG
+ * Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
+ *
+ * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com>
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+
+/* Register bitfield defines */
+#define PLLCTRL_FBDIV_MASK	0x7f000
+#define PLLCTRL_FBDIV_SHIFT	12
+#define PLLCTRL_BPFORCE_MASK	(1 << 4)
+#define PLLCTRL_PWRDWN_MASK	2
+#define PLLCTRL_PWRDWN_SHIFT	1
+#define PLLCTRL_RESET_MASK	1
+#define PLLCTRL_RESET_SHIFT	0
+
+#define ZYNQ_CLK_MAXDIV		0x3f
+#define CLK_CTRL_DIV1_SHIFT	20
+#define CLK_CTRL_DIV1_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
+#define CLK_CTRL_DIV0_SHIFT	8
+#define CLK_CTRL_DIV0_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
+#define CLK_CTRL_SRCSEL_SHIFT	4
+#define CLK_CTRL_SRCSEL_MASK	(0x3 << CLK_CTRL_SRCSEL_SHIFT)
+
+#define CLK_CTRL_DIV2X_SHIFT	26
+#define CLK_CTRL_DIV2X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT)
+#define CLK_CTRL_DIV3X_SHIFT	20
+#define CLK_CTRL_DIV3X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SPL_BUILD
+enum zynq_clk_rclk {mio_clk, emio_clk};
+#endif
+
+struct zynq_clk_priv {
+	ulong ps_clk_freq;
+#ifndef CONFIG_SPL_BUILD
+	struct clk gem_emio_clk[2];
+#endif
+};
+
+static void *zynq_clk_get_register(enum zynq_clk id)
+{
+	switch (id) {
+	case armpll_clk:
+		return &slcr_base->arm_pll_ctrl;
+	case ddrpll_clk:
+		return &slcr_base->ddr_pll_ctrl;
+	case iopll_clk:
+		return &slcr_base->io_pll_ctrl;
+	case lqspi_clk:
+		return &slcr_base->lqspi_clk_ctrl;
+	case smc_clk:
+		return &slcr_base->smc_clk_ctrl;
+	case pcap_clk:
+		return &slcr_base->pcap_clk_ctrl;
+	case sdio0_clk ... sdio1_clk:
+		return &slcr_base->sdio_clk_ctrl;
+	case uart0_clk ... uart1_clk:
+		return &slcr_base->uart_clk_ctrl;
+	case spi0_clk ... spi1_clk:
+		return &slcr_base->spi_clk_ctrl;
+#ifndef CONFIG_SPL_BUILD
+	case dci_clk:
+		return &slcr_base->dci_clk_ctrl;
+	case gem0_clk:
+		return &slcr_base->gem0_clk_ctrl;
+	case gem1_clk:
+		return &slcr_base->gem1_clk_ctrl;
+	case fclk0_clk:
+		return &slcr_base->fpga0_clk_ctrl;
+	case fclk1_clk:
+		return &slcr_base->fpga1_clk_ctrl;
+	case fclk2_clk:
+		return &slcr_base->fpga2_clk_ctrl;
+	case fclk3_clk:
+		return &slcr_base->fpga3_clk_ctrl;
+	case can0_clk ... can1_clk:
+		return &slcr_base->can_clk_ctrl;
+	case dbg_trc_clk ... dbg_apb_clk:
+		/* fall through */
+#endif
+	default:
+		return &slcr_base->dbg_clk_ctrl;
+	}
+}
+
+static enum zynq_clk zynq_clk_get_cpu_pll(u32 clk_ctrl)
+{
+	u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+
+	switch (srcsel) {
+	case 2:
+		return ddrpll_clk;
+	case 3:
+		return iopll_clk;
+	case 0 ... 1:
+	default:
+		return armpll_clk;
+	}
+}
+
+static enum zynq_clk zynq_clk_get_peripheral_pll(u32 clk_ctrl)
+{
+	u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+
+	switch (srcsel) {
+	case 2:
+		return armpll_clk;
+	case 3:
+		return ddrpll_clk;
+	case 0 ... 1:
+	default:
+		return iopll_clk;
+	}
+}
+
+static ulong zynq_clk_get_pll_rate(struct zynq_clk_priv *priv, enum zynq_clk id)
+{
+	u32 clk_ctrl, reset, pwrdwn, mul, bypass;
+
+	clk_ctrl = readl(zynq_clk_get_register(id));
+
+	reset = (clk_ctrl & PLLCTRL_RESET_MASK) >> PLLCTRL_RESET_SHIFT;
+	pwrdwn = (clk_ctrl & PLLCTRL_PWRDWN_MASK) >> PLLCTRL_PWRDWN_SHIFT;
+	if (reset || pwrdwn)
+		return 0;
+
+	bypass = clk_ctrl & PLLCTRL_BPFORCE_MASK;
+	if (bypass)
+		mul = 1;
+	else
+		mul = (clk_ctrl & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
+
+	return priv->ps_clk_freq * mul;
+}
+
+#ifndef CONFIG_SPL_BUILD
+static enum zynq_clk_rclk zynq_clk_get_gem_rclk(enum zynq_clk id)
+{
+	u32 clk_ctrl, srcsel;
+
+	if (id == gem0_clk)
+		clk_ctrl = readl(&slcr_base->gem0_rclk_ctrl);
+	else
+		clk_ctrl = readl(&slcr_base->gem1_rclk_ctrl);
+
+	srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	if (srcsel)
+		return emio_clk;
+	else
+		return mio_clk;
+}
+#endif
+
+static ulong zynq_clk_get_cpu_rate(struct zynq_clk_priv *priv, enum zynq_clk id)
+{
+	u32 clk_621, clk_ctrl, div;
+	enum zynq_clk pll;
+
+	clk_ctrl = readl(&slcr_base->arm_clk_ctrl);
+
+	div = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+
+	switch (id) {
+	case cpu_1x_clk:
+		div *= 2;
+		/* fall through */
+	case cpu_2x_clk:
+		clk_621 = readl(&slcr_base->clk_621_true) & 1;
+		div *= 2 + clk_621;
+		break;
+	case cpu_3or2x_clk:
+		div *= 2;
+		/* fall through */
+	case cpu_6or4x_clk:
+		break;
+	default:
+		return 0;
+	}
+
+	pll = zynq_clk_get_cpu_pll(clk_ctrl);
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, pll), div);
+}
+
+#ifndef CONFIG_SPL_BUILD
+static ulong zynq_clk_get_ddr2x_rate(struct zynq_clk_priv *priv)
+{
+	u32 clk_ctrl, div;
+
+	clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
+
+	div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, ddrpll_clk), div);
+}
+#endif
+
+static ulong zynq_clk_get_ddr3x_rate(struct zynq_clk_priv *priv)
+{
+	u32 clk_ctrl, div;
+
+	clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
+
+	div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, ddrpll_clk), div);
+}
+
+#ifndef CONFIG_SPL_BUILD
+static ulong zynq_clk_get_dci_rate(struct zynq_clk_priv *priv)
+{
+	u32 clk_ctrl, div0, div1;
+
+	clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
+
+	div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+
+	return DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(
+		zynq_clk_get_pll_rate(priv, ddrpll_clk), div0), div1);
+}
+#endif
+
+static ulong zynq_clk_get_peripheral_rate(struct zynq_clk_priv *priv,
+					  enum zynq_clk id, bool two_divs)
+{
+	enum zynq_clk pll;
+	u32 clk_ctrl, div0;
+	u32 div1 = 1;
+
+	clk_ctrl = readl(zynq_clk_get_register(id));
+
+	div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	if (!div0)
+		div0 = 1;
+
+#ifndef CONFIG_SPL_BUILD
+	if (two_divs) {
+		div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+		if (!div1)
+			div1 = 1;
+	}
+#endif
+
+	pll = zynq_clk_get_peripheral_pll(clk_ctrl);
+
+	return
+		DIV_ROUND_CLOSEST(
+			DIV_ROUND_CLOSEST(
+				zynq_clk_get_pll_rate(priv, pll), div0),
+			div1);
+}
+
+#ifndef CONFIG_SPL_BUILD
+static ulong zynq_clk_get_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id)
+{
+	struct clk *parent;
+
+	if (zynq_clk_get_gem_rclk(id) == mio_clk)
+		return zynq_clk_get_peripheral_rate(priv, id, true);
+
+	parent = &priv->gem_emio_clk[id - gem0_clk];
+	if (parent->dev)
+		return clk_get_rate(parent);
+
+	debug("%s: gem%d emio rx clock source unknown\n", __func__,
+	      id - gem0_clk);
+
+	return -ENOSYS;
+}
+
+static unsigned long zynq_clk_calc_peripheral_two_divs(ulong rate,
+						       ulong pll_rate,
+						       u32 *div0, u32 *div1)
+{
+	long new_err, best_err = (long)(~0UL >> 1);
+	ulong new_rate, best_rate = 0;
+	u32 d0, d1;
+
+	for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
+		for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
+			new_rate = DIV_ROUND_CLOSEST(
+					DIV_ROUND_CLOSEST(pll_rate, d0), d1);
+			new_err = abs(new_rate - rate);
+
+			if (new_err < best_err) {
+				*div0 = d0;
+				*div1 = d1;
+				best_err = new_err;
+				best_rate = new_rate;
+			}
+		}
+	}
+
+	return best_rate;
+}
+
+static ulong zynq_clk_set_peripheral_rate(struct zynq_clk_priv *priv,
+					  enum zynq_clk id, ulong rate,
+					  bool two_divs)
+{
+	enum zynq_clk pll;
+	u32 clk_ctrl, div0 = 0, div1 = 0;
+	ulong pll_rate, new_rate;
+	u32 *reg;
+
+	reg = zynq_clk_get_register(id);
+	clk_ctrl = readl(reg);
+
+	pll = zynq_clk_get_peripheral_pll(clk_ctrl);
+	pll_rate = zynq_clk_get_pll_rate(priv, pll);
+	clk_ctrl &= ~CLK_CTRL_DIV0_MASK;
+	if (two_divs) {
+		clk_ctrl &= ~CLK_CTRL_DIV1_MASK;
+		new_rate = zynq_clk_calc_peripheral_two_divs(rate, pll_rate,
+				&div0, &div1);
+		clk_ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
+	} else {
+		div0 = DIV_ROUND_CLOSEST(pll_rate, rate);
+		if (div0 > ZYNQ_CLK_MAXDIV)
+			div0 = ZYNQ_CLK_MAXDIV;
+		new_rate = DIV_ROUND_CLOSEST(rate, div0);
+	}
+	clk_ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
+
+	zynq_slcr_unlock();
+	writel(clk_ctrl, reg);
+	zynq_slcr_lock();
+
+	return new_rate;
+}
+
+static ulong zynq_clk_set_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id,
+				   ulong rate)
+{
+	struct clk *parent;
+
+	if (zynq_clk_get_gem_rclk(id) == mio_clk)
+		return zynq_clk_set_peripheral_rate(priv, id, rate, true);
+
+	parent = &priv->gem_emio_clk[id - gem0_clk];
+	if (parent->dev)
+		return clk_set_rate(parent, rate);
+
+	debug("%s: gem%d emio rx clock source unknown\n", __func__,
+	      id - gem0_clk);
+
+	return -ENOSYS;
+}
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+static ulong zynq_clk_get_rate(struct clk *clk)
+{
+	struct zynq_clk_priv *priv = dev_get_priv(clk->dev);
+	enum zynq_clk id = clk->id;
+	bool two_divs = false;
+
+	switch (id) {
+	case armpll_clk ... iopll_clk:
+		return zynq_clk_get_pll_rate(priv, id);
+	case cpu_6or4x_clk ... cpu_1x_clk:
+		return zynq_clk_get_cpu_rate(priv, id);
+	case ddr2x_clk:
+		return zynq_clk_get_ddr2x_rate(priv);
+	case ddr3x_clk:
+		return zynq_clk_get_ddr3x_rate(priv);
+	case dci_clk:
+		return zynq_clk_get_dci_rate(priv);
+	case gem0_clk ... gem1_clk:
+		return zynq_clk_get_gem_rate(priv, id);
+	case fclk0_clk ... can1_clk:
+		two_divs = true;
+		/* fall through */
+	case dbg_trc_clk ... dbg_apb_clk:
+	case lqspi_clk ... pcap_clk:
+	case sdio0_clk ... spi1_clk:
+		return zynq_clk_get_peripheral_rate(priv, id, two_divs);
+	case dma_clk:
+		return zynq_clk_get_cpu_rate(priv, cpu_2x_clk);
+	case usb0_aper_clk ... smc_aper_clk:
+		return zynq_clk_get_cpu_rate(priv, cpu_1x_clk);
+	default:
+		return -ENXIO;
+	}
+}
+
+static ulong zynq_clk_set_rate(struct clk *clk, ulong rate)
+{
+	struct zynq_clk_priv *priv = dev_get_priv(clk->dev);
+	enum zynq_clk id = clk->id;
+	bool two_divs = false;
+
+	switch (id) {
+	case gem0_clk ... gem1_clk:
+		return zynq_clk_set_gem_rate(priv, id, rate);
+	case fclk0_clk ... can1_clk:
+		two_divs = true;
+		/* fall through */
+	case lqspi_clk ... pcap_clk:
+	case sdio0_clk ... spi1_clk:
+	case dbg_trc_clk ... dbg_apb_clk:
+		return zynq_clk_set_peripheral_rate(priv, id, rate, two_divs);
+	default:
+		return -ENXIO;
+	}
+}
+#else
+static ulong zynq_clk_get_rate(struct clk *clk)
+{
+	struct zynq_clk_priv *priv = dev_get_priv(clk->dev);
+	enum zynq_clk id = clk->id;
+
+	switch (id) {
+	case cpu_6or4x_clk ... cpu_1x_clk:
+		return zynq_clk_get_cpu_rate(priv, id);
+	case ddr3x_clk:
+		return zynq_clk_get_ddr3x_rate(priv);
+	case lqspi_clk ... pcap_clk:
+	case sdio0_clk ... spi1_clk:
+		return zynq_clk_get_peripheral_rate(priv, id, 0);
+	default:
+		return -ENXIO;
+	}
+}
+#endif
+
+static struct clk_ops zynq_clk_ops = {
+	.get_rate = zynq_clk_get_rate,
+#ifndef CONFIG_SPL_BUILD
+	.set_rate = zynq_clk_set_rate,
+#endif
+};
+
+static int zynq_clk_probe(struct udevice *dev)
+{
+	struct zynq_clk_priv *priv = dev_get_priv(dev);
+#ifndef CONFIG_SPL_BUILD
+	unsigned int i;
+	char name[16];
+	int ret;
+
+	for (i = 0; i < 2; i++) {
+		sprintf(name, "gem%d_emio_clk", i);
+		ret = clk_get_by_name(dev, name, &priv->gem_emio_clk[i]);
+		if (ret < 0 && ret != -FDT_ERR_NOTFOUND) {
+			dev_err(dev, "failed to get %s clock\n", name);
+			return ret;
+		}
+	}
+#endif
+
+	priv->ps_clk_freq = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
+					    "ps-clk-frequency", 33333333UL);
+
+	return 0;
+}
+
+static const struct udevice_id zynq_clk_ids[] = {
+	{ .compatible = "xlnx,ps7-clkc"},
+	{}
+};
+
+U_BOOT_DRIVER(zynq_clk) = {
+	.name		= "zynq_clk",
+	.id		= UCLASS_CLK,
+	.of_match	= zynq_clk_ids,
+	.flags		= DM_FLAG_PRE_RELOC,
+	.ops		= &zynq_clk_ops,
+	.priv_auto_alloc_size = sizeof(struct zynq_clk_priv),
+	.probe		= zynq_clk_probe,
+};
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 69efa38..28cedf0 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -6,6 +6,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <clk.h>
 #include <common.h>
 #include <dm.h>
 #include <fdtdec.h>
@@ -13,6 +14,8 @@
 #include <malloc.h>
 #include <sdhci.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ
 # define CONFIG_ZYNQ_SDHCI_MIN_FREQ	0
 #endif
@@ -20,6 +23,7 @@
 struct arasan_sdhci_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
+	unsigned int f_max;
 };
 
 static int arasan_sdhci_probe(struct udevice *dev)
@@ -27,8 +31,29 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
 	struct sdhci_host *host = dev_get_priv(dev);
+	struct clk clk;
+	unsigned long clock;
 	int ret;
 
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to get clock\n");
+		return ret;
+	}
+
+	clock = clk_get_rate(&clk);
+	if (IS_ERR_VALUE(clock)) {
+		dev_err(dev, "failed to get rate\n");
+		return clock;
+	}
+	debug("%s: CLK %ld\n", __func__, clock);
+
+	ret = clk_enable(&clk);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
 	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
 		       SDHCI_QUIRK_BROKEN_R1B;
 
@@ -36,9 +61,9 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
 #endif
 
-	host->max_clk = CONFIG_ZYNQ_SDHCI_MAX_FREQ;
+	host->max_clk = clock;
 
-	ret = sdhci_setup_cfg(&plat->cfg, host, 0,
+	ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
 			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
 	host->mmc = &plat->mmc;
 	if (ret)
@@ -52,11 +77,15 @@ static int arasan_sdhci_probe(struct udevice *dev)
 
 static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 {
+	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
 	struct sdhci_host *host = dev_get_priv(dev);
 
 	host->name = dev->name;
 	host->ioaddr = (void *)dev_get_addr(dev);
 
+	plat->f_max = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+				"max-frequency", CONFIG_ZYNQ_SDHCI_MAX_FREQ);
+
 	return 0;
 }
 
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index a160564..357f8c2 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -175,16 +175,13 @@ struct zynq_gem_priv {
 	u32 rxbd_current;
 	u32 rx_first_buf;
 	int phyaddr;
-	u32 emio;
 	int init;
 	struct zynq_gem_regs *iobase;
 	phy_interface_t interface;
 	struct phy_device *phydev;
 	int phy_of_handle;
 	struct mii_dev *bus;
-#ifdef CONFIG_CLK_ZYNQMP
 	struct clk clk;
-#endif
 };
 
 static u32 phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum,
@@ -457,16 +454,17 @@ static int zynq_gem_init(struct udevice *dev)
 		break;
 	}
 
-	/* Change the rclk and clk only not using EMIO interface */
-	if (!priv->emio)
-#ifndef CONFIG_CLK_ZYNQMP
-		zynq_slcr_gem_clk_setup((ulong)priv->iobase !=
-					ZYNQ_GEM_BASEADDR0, clk_rate);
-#else
-		ret = clk_set_rate(&priv->clk, clk_rate);
-		if (IS_ERR_VALUE(ret))
-			return -1;
-#endif
+	ret = clk_set_rate(&priv->clk, clk_rate);
+	if (IS_ERR_VALUE(ret) && ret != (unsigned long)-ENOSYS) {
+		dev_err(dev, "failed to set tx clock rate\n");
+		return ret;
+	}
+
+	ret = clk_enable(&priv->clk);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable tx clock\n");
+		return ret;
+	}
 
 	setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
 					ZYNQ_GEM_NWCTRL_TXEN_MASK);
@@ -639,13 +637,11 @@ static int zynq_gem_probe(struct udevice *dev)
 	priv->tx_bd = (struct emac_bd *)bd_space;
 	priv->rx_bd = (struct emac_bd *)((ulong)bd_space + BD_SEPRN_SPACE);
 
-#ifdef CONFIG_CLK_ZYNQMP
 	ret = clk_get_by_name(dev, "tx_clk", &priv->clk);
 	if (ret < 0) {
 		dev_err(dev, "failed to get clock\n");
 		return -EINVAL;
 	}
-#endif
 
 	priv->bus = mdio_alloc();
 	priv->bus->read = zynq_gem_miiphy_read;
@@ -690,7 +686,6 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev)
 	pdata->iobase = (phys_addr_t)dev_get_addr(dev);
 	priv->iobase = (struct zynq_gem_regs *)pdata->iobase;
 	/* Hardcode for now */
-	priv->emio = 0;
 	priv->phyaddr = -1;
 
 	priv->phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, node,
@@ -708,8 +703,6 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev)
 	}
 	priv->interface = pdata->phy_interface;
 
-	priv->emio = fdtdec_get_bool(gd->fdt_blob, node, "xlnx,emio");
-
 	printf("ZYNQ GEM: %lx, phyaddr %x, interface %s\n", (ulong)priv->iobase,
 	       priv->phyaddr, phy_string_for_interface(priv->interface));
 
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index 4f6e7e4..a2967c0 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -15,7 +15,6 @@
 #include <asm/io.h>
 #include <linux/compiler.h>
 #include <serial.h>
-#include <asm/arch/clk.h>
 #include <asm/arch/hardware.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -111,7 +110,6 @@ int zynq_serial_setbrg(struct udevice *dev, int baudrate)
 	struct zynq_uart_priv *priv = dev_get_priv(dev);
 	unsigned long clock;
 
-#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK)
 	int ret;
 	struct clk clk;
 
@@ -133,9 +131,7 @@ int zynq_serial_setbrg(struct udevice *dev, int baudrate)
 		dev_err(dev, "failed to enable clock\n");
 		return ret;
 	}
-#else
-	clock = get_uart_clk(0);
-#endif
+
 	_uart_zynq_serial_setbrg(priv->regs, clock, baudrate);
 
 	return 0;
diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index 42cfbb0..a56ceef 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -10,8 +10,6 @@
 #ifndef __CONFIG_TOPIC_MIAMI_H
 #define __CONFIG_TOPIC_MIAMI_H
 
-#define CONFIG_ZYNQ_PS_CLK_FREQ		33333333UL
-
 #define CONFIG_ZYNQ_I2C0
 #define CONFIG_ZYNQ_I2C1
 
diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h
index b9ff391..1488fd8 100644
--- a/include/configs/zynq_zybo.h
+++ b/include/configs/zynq_zybo.h
@@ -20,9 +20,6 @@
 #define CONFIG_DISPLAY
 #define CONFIG_I2C_EDID
 
-/* Define ZYBO PS Clock Frequency to 50MHz */
-#define CONFIG_ZYNQ_PS_CLK_FREQ	50000000UL
-
 #include <configs/zynq-common.h>
 
 #endif /* __CONFIG_ZYNQ_ZYBO_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index c4e5eb4..a62a601 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -6848,7 +6848,6 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET
 CONFIG_ZYNQ_HISPD_BROKEN
 CONFIG_ZYNQ_I2C0
 CONFIG_ZYNQ_I2C1
-CONFIG_ZYNQ_PS_CLK_FREQ
 CONFIG_ZYNQ_SDHCI0
 CONFIG_ZYNQ_SDHCI1
 CONFIG_ZYNQ_SDHCI_MAX_FREQ