diff options
568 files changed, 9481 insertions, 1759 deletions
@@ -91,7 +91,7 @@ config SYS_EXTRA_OPTIONS depends on !SPL_BUILD help The old configuration infrastructure (= mkconfig + boards.cfg) - provided the extra options field. It you have something like + provided the extra options field. If you have something like "HAS_BAR,BAZ=64", the optional options #define CONFIG_HAS #define CONFIG_BAZ 64 @@ -103,3 +103,15 @@ config SYS_EXTRA_OPTIONS endmenu # Boot images source "arch/Kconfig" + +source "common/Kconfig" + +source "dts/Kconfig" + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "lib/Kconfig" diff --git a/MAINTAINERS b/MAINTAINERS index af194ca..aafa061 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -149,6 +149,15 @@ F: arch/arm/include/asm/arch-davinci/ F: arch/arm/include/asm/arch-omap*/ F: arch/arm/include/asm/ti-common/ +ARM UNIPHIER +M: Masahiro Yamada <yamada.m@jp.panasonic.com> +S: Maintained +T: git git://git.denx.de/u-boot-uniphier.git +F: arch/arm/cpu/armv7/uniphier/ +F: arch/arm/include/asm/arch-uniphier/ +F: configs/ph1_*_defconfig +F: drivers/serial/serial_uniphier.c + ARM ZYNQ M: Michal Simek <monstr@monstr.eu> S: Maintained @@ -613,11 +613,9 @@ libs-y += fs/ libs-y += net/ libs-y += disk/ libs-y += drivers/ -libs-$(CONFIG_DM) += drivers/core/ libs-y += drivers/dma/ libs-y += drivers/gpio/ libs-y += drivers/i2c/ -libs-y += drivers/input/ libs-y += drivers/mmc/ libs-y += drivers/mtd/ libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ @@ -649,7 +647,6 @@ libs-$(CONFIG_API) += api/ libs-$(CONFIG_HAS_POST) += post/ libs-y += test/ libs-y += test/dm/ -libs-$(CONFIG_DM_DEMO) += drivers/demo/ ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) libs-y += arch/$(ARCH)/imx-common/ @@ -272,7 +272,7 @@ board. This allows feature development which is not board- or architecture- specific to be undertaken on a native platform. The sandbox is also used to run some of U-Boot's tests. -See board/sandbox/sandbox/README.sandbox for more details. +See board/sandbox/README.sandbox for more details. Configuration Options: @@ -538,6 +538,12 @@ The following options need to be configured: interleaving mode, handled by Dickens for Freescale layerscape SoCs with ARM core. + CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS + Number of controllers used as main memory. + + CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS + Number of controllers used for other than main memory. + - Intel Monahans options: CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO @@ -1629,6 +1635,16 @@ The following options need to be configured: downloads. This buffer should be as large as possible for a platform. Define this to the size available RAM for fastboot. + CONFIG_FASTBOOT_FLASH + The fastboot protocol includes a "flash" command for writing + the downloaded image to a non-volatile storage device. Define + this to enable the "fastboot flash" command. + + CONFIG_FASTBOOT_FLASH_MMC_DEV + The fastboot "flash" command requires additional information + regarding the non-volatile storage device. Define this to + the eMMC device that fastboot should use to store the image. + - Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, CONFIG_JFFS2_NAND_DEV @@ -3849,12 +3865,9 @@ Configuration Settings: The memory will be freed (or in fact just forgotton) when U-Boot relocates itself. - Pre-relocation malloc() is only supported on sandbox + Pre-relocation malloc() is only supported on ARM and sandbox at present but is fairly easy to enable for other archs. - Pre-relocation malloc() is only supported on ARM at present - but is fairly easy to enable for other archs. - - CONFIG_SYS_BOOTM_LEN: Normally compressed uImages are limited to an uncompressed size of 8 MBytes. If this is not enough, diff --git a/arch/Kconfig b/arch/Kconfig index c9ccb7d..bf26764 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -7,6 +7,7 @@ config ARC config ARM bool "ARM architecture" + select SUPPORT_OF_CONTROL config AVR32 bool "AVR32 architecture" @@ -19,6 +20,7 @@ config M68K config MICROBLAZE bool "MicroBlaze architecture" + select SUPPORT_OF_CONTROL config MIPS bool "MIPS architecture" @@ -37,6 +39,7 @@ config PPC config SANDBOX bool "Sandbox" + select SUPPORT_OF_CONTROL config SH bool "SuperH architecture" @@ -46,6 +49,7 @@ config SPARC config X86 bool "x86 architecture" + select SUPPORT_OF_CONTROL endchoice diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8face21..7365fca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -465,6 +465,7 @@ config ZYNQ config TEGRA bool "NVIDIA Tegra" select SPL + select OF_CONTROL if !SPL_BUILD config TARGET_VEXPRESS_AEMV8A bool "Support vexpress_aemv8a" @@ -523,6 +524,9 @@ config TARGET_COLIBRI_PXA270 config TARGET_JORNADA bool "Support jornada" +config ARCH_UNIPHIER + bool "Panasonic UniPhier platform" + endchoice source "arch/arm/cpu/armv8/Kconfig" @@ -551,6 +555,8 @@ source "arch/arm/cpu/armv7/rmobile/Kconfig" source "arch/arm/cpu/armv7/tegra-common/Kconfig" +source "arch/arm/cpu/armv7/uniphier/Kconfig" + source "arch/arm/cpu/arm926ejs/versatile/Kconfig" source "arch/arm/cpu/armv7/zynq/Kconfig" diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c index 3708b6f..47c23bb 100644 --- a/arch/arm/cpu/arm1176/tnetv107x/clock.c +++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c @@ -362,7 +362,7 @@ static void init_pll(const struct pll_init_data *data) pllctl_reg_write(data->pll, ctl, tmp); mult = data->pll_freq / fpll; - for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) { + for (mult = max(mult, 1); mult <= MAX_MULT; mult++) { div = (fpll * mult) / data->pll_freq; if (div < 1 || div > MAX_DIV) continue; diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index d132f03..e7c93d8 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -23,18 +23,23 @@ config TARGET_ODROID config TARGET_ARNDALE bool "Exynos5250 Arndale board" + select OF_CONTROL if !SPL_BUILD config TARGET_SMDK5250 bool "SMDK5250 board" + select OF_CONTROL if !SPL_BUILD config TARGET_SNOW bool "Snow board" + select OF_CONTROL if !SPL_BUILD config TARGET_SMDK5420 bool "SMDK5420 board" + select OF_CONTROL if !SPL_BUILD config TARGET_PEACH_PIT bool "Peach Pi board" + select OF_CONTROL if !SPL_BUILD endchoice diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 7b5c1e4..7a9b03a 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -247,47 +247,47 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, switch (ddr3_cfg->mem_speed) { case 800: - txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(50000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } break; case 1066: - txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(37500, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } else { tfaw = DIV_ROUND_UP(50000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } break; case 1333: - txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(45000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } break; case 1600: - txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5000), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5000), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } break; default: @@ -295,18 +295,18 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, hang(); break; } - txpdll = DIV_ROUND_UP(MAX(10 * clkper, 24000), clkper) - 1; - tcksre = DIV_ROUND_UP(MAX(5 * clkper, 10000), clkper); + txpdll = DIV_ROUND_UP(max(10 * clkper, 24000), clkper) - 1; + tcksre = DIV_ROUND_UP(max(5 * clkper, 10000), clkper); taonpd = DIV_ROUND_UP(2000, clkper) - 1; tcksrx = tcksre; taofpd = taonpd; twr = DIV_ROUND_UP(15000, clkper) - 1; - tmrd = DIV_ROUND_UP(MAX(12 * clkper, 15000), clkper) - 1; + tmrd = DIV_ROUND_UP(max(12 * clkper, 15000), clkper) - 1; trc = DIV_ROUND_UP(ddr3_cfg->trcmin, clkper / 10) - 1; tras = DIV_ROUND_UP(ddr3_cfg->trasmin, clkper / 10) - 1; tcl = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 3; trp = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 1; - twtr = ROUND(MAX(4 * clkper, 7500) / clkper, 1) - 1; + twtr = ROUND(max(4 * clkper, 7500) / clkper, 1) - 1; trcd = trp; trtp = twtr; cs0_end = 4 * sysinfo->cs_density - 1; diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig new file mode 100644 index 0000000..34f5496 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -0,0 +1,32 @@ +menu "Panasonic UniPhier platform" + depends on ARCH_UNIPHIER + +config SYS_CPU + string + default "armv7" + +config SYS_SOC + string + default "uniphier" + +config SYS_CONFIG_NAME + string + default "ph1_pro4" if MACH_PH1_PRO4 + default "ph1_ld4" if MACH_PH1_LD4 + default "ph1_sld8" if MACH_PH1_SLD8 + +choice + prompt "UniPhier SoC select" + +config MACH_PH1_PRO4 + bool "PH1-Pro4" + +config MACH_PH1_LD4 + bool "PH1-LD4" + +config MACH_PH1_SLD8 + bool "PH1-sLD8" + +endchoice + +endmenu diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile new file mode 100644 index 0000000..7ceddda --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/Makefile @@ -0,0 +1,23 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_SPL_BUILD) += lowlevel_init.o init_page_table.o +obj-$(CONFIG_SPL_BUILD) += spl.o + +obj-y += timer.o +obj-y += reset.o +obj-y += cache_uniphier.o +obj-y += dram_init.o +obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o +obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o +obj-$(CONFIG_UNIPHIER_SMP) += smp.o +obj-$(if $(CONFIG_SPL_BUILD),,y) += cmd_pinmon.o + +obj-y += board_common.o +obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o +obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o + +obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ +obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ +obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ diff --git a/arch/arm/cpu/armv7/uniphier/board_common.c b/arch/arm/cpu/armv7/uniphier/board_common.c new file mode 100644 index 0000000..3fb26c6 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/board_common.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/led.h> + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + led_write(U, B, O, O); + + return 0; +} + +#if CONFIG_NR_DRAM_BANKS >= 2 +void dram_init_banksize(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE; + gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE; + gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE; + gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE; +} +#endif diff --git a/arch/arm/cpu/armv7/uniphier/board_late_init.c b/arch/arm/cpu/armv7/uniphier/board_late_init.c new file mode 100644 index 0000000..3730020 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/board_late_init.c @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <nand.h> +#include <asm/io.h> +#include <../drivers/mtd/nand/denali.h> + +static void nand_denali_wp_disable(void) +{ +#ifdef CONFIG_NAND_DENALI + /* + * Since the boot rom enables the write protection for NAND boot mode, + * it must be disabled somewhere for "nand write", "nand erase", etc. + * The workaround is here to not disturb the Denali NAND controller + * driver just for a really SoC-specific thing. + */ + void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; + + writel(WRITE_PROTECT__FLAG, denali_reg + WRITE_PROTECT); +#endif +} + +static void nand_denali_fixup(void) +{ +#if defined(CONFIG_NAND_DENALI) && \ + (defined(CONFIG_MACH_PH1_SLD8) || defined(CONFIG_MACH_PH1_PRO4)) + /* + * The Denali NAND controller on some of UniPhier SoCs does not + * automatically query the device parameters. For those SoCs, + * some registers must be set after the device is probed. + */ + void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; + struct mtd_info *mtd; + struct nand_chip *chip; + + if (nand_curr_device < 0 || + nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE) { + /* NAND was not detected. Just return. */ + return; + } + + mtd = &nand_info[nand_curr_device]; + chip = mtd->priv; + + writel(mtd->erasesize / mtd->writesize, denali_reg + PAGES_PER_BLOCK); + writel(0, denali_reg + DEVICE_WIDTH); + writel(mtd->writesize, denali_reg + DEVICE_MAIN_AREA_SIZE); + writel(mtd->oobsize, denali_reg + DEVICE_SPARE_AREA_SIZE); + writel(1, denali_reg + DEVICES_CONNECTED); + + /* + * chip->scan_bbt in nand_scan_tail() has been skipped. + * It should be done in here. + */ + chip->scan_bbt(mtd); +#endif +} + +int board_late_init(void) +{ + puts("MODE: "); + + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC1: + printf("eMMC Boot\n"); + setenv("bootmode", "emmcboot"); + nand_denali_fixup(); + break; + case BOOT_DEVICE_NAND: + printf("NAND Boot\n"); + setenv("bootmode", "nandboot"); + nand_denali_wp_disable(); + break; + case BOOT_DEVICE_NOR: + printf("NOR Boot\n"); + setenv("bootmode", "norboot"); + nand_denali_fixup(); + break; + default: + printf("Unsupported Boot Mode\n"); + return -1; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/uniphier/cache_uniphier.c b/arch/arm/cpu/armv7/uniphier/cache_uniphier.c new file mode 100644 index 0000000..e47f977 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/cache_uniphier.c @@ -0,0 +1,154 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/armv7.h> +#include <asm/arch/ssc-regs.h> + +#ifdef CONFIG_UNIPHIER_L2CACHE_ON +static void uniphier_cache_maint_all(u32 operation) +{ + /* try until the command is successfully set */ + do { + writel(SSCOQM_S_ALL | SSCOQM_CE | operation, SSCOQM); + } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE)); + + /* wait until the operation is completed */ + while (readl(SSCOLPQS) != SSCOLPQS_EF) + ; + + /* clear the complete notification flag */ + writel(SSCOLPQS_EF, SSCOLPQS); + + writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */ + readl(SSCOPE); /* need a read back to confirm */ +} + +void v7_outer_cache_flush_all(void) +{ + uniphier_cache_maint_all(SSCOQM_CM_WB_INV); +} + +void v7_outer_cache_inval_all(void) +{ + uniphier_cache_maint_all(SSCOQM_CM_INV); +} + +static void __uniphier_cache_maint_range(u32 start, u32 size, u32 operation) +{ + /* try until the command is successfully set */ + do { + writel(SSCOQM_S_ADDRESS | SSCOQM_CE | operation, SSCOQM); + writel(start, SSCOQAD); + writel(size, SSCOQSZ); + + } while (readl(SSCOPPQSEF) & (SSCOPPQSEF_FE | SSCOPPQSEF_OE)); + + /* wait until the operation is completed */ + while (readl(SSCOLPQS) != SSCOLPQS_EF) + ; + + /* clear the complete notification flag */ + writel(SSCOLPQS_EF, SSCOLPQS); +} + +static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation) +{ + u32 size; + + /* + * If start address is not aligned to cache-line, + * do cache operation for the first cache-line + */ + start = start & ~(SSC_LINE_SIZE - 1); + + if (start == 0 && end >= (u32)(-SSC_LINE_SIZE)) { + /* this means cache operation for all range */ + uniphier_cache_maint_all(operation); + return; + } + + /* + * If end address is not aligned to cache-line, + * do cache operation for the last cache-line + */ + size = (end - start + SSC_LINE_SIZE - 1) & ~(SSC_LINE_SIZE - 1); + + while (size) { + u32 chunk_size = size > SSC_RANGE_OP_MAX_SIZE ? + SSC_RANGE_OP_MAX_SIZE : size; + __uniphier_cache_maint_range(start, chunk_size, operation); + + start += chunk_size; + size -= chunk_size; + } + + writel(SSCOPE_CM_SYNC, SSCOPE); /* drain internal buffers */ + readl(SSCOPE); /* need a read back to confirm */ +} + +void v7_outer_cache_flush_range(u32 start, u32 end) +{ + uniphier_cache_maint_range(start, end, SSCOQM_CM_WB_INV); +} + +void v7_outer_cache_inval_range(u32 start, u32 end) +{ + uniphier_cache_maint_range(start, end, SSCOQM_CM_INV); +} + +void v7_outer_cache_enable(void) +{ + u32 tmp; + tmp = readl(SSCC); + tmp |= SSCC_ON; + writel(tmp, SSCC); +} +#endif + +void v7_outer_cache_disable(void) +{ + u32 tmp; + tmp = readl(SSCC); + tmp &= ~SSCC_ON; + writel(tmp, SSCC); +} + +void wakeup_secondary(void); + +void enable_caches(void) +{ + uint32_t reg; + +#ifdef CONFIG_UNIPHIER_SMP + /* + * The secondary CPU must move to DDR, + * before L2 disable. + * On SPL, the Page Table is located on the L2. + */ + wakeup_secondary(); +#endif + /* + * UniPhier SoCs must use L2 cache for init stack pointer. + * We disable L2 and L1 in this order. + * If CONFIG_SYS_DCACHE_OFF is not defined, + * caches are enabled again with a new page table. + */ + + /* L2 disable */ + v7_outer_cache_disable(); + + /* L1 disable */ + reg = get_cr(); + reg &= ~(CR_C | CR_M); + set_cr(reg); + +#ifndef CONFIG_SYS_DCACHE_OFF + dcache_enable(); +#endif +} diff --git a/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c b/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c new file mode 100644 index 0000000..eef9f39 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/boot-device.h> + +static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct boot_device_info *table; + u32 mode_sel, n = 0; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (table = boot_device_table; strlen(table->info); table++) { + printf(" %c %02x %s\n", n == mode_sel ? '*' : ' ', n, + table->info); + n++; + } + + return 0; +} + +U_BOOT_CMD( + pinmon, 1, 1, do_pinmon, + "pin monitor", + "" +); diff --git a/arch/arm/cpu/armv7/uniphier/cpu_info.c b/arch/arm/cpu/armv7/uniphier/cpu_info.c new file mode 100644 index 0000000..86d079a --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/cpu_info.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2013-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sg-regs.h> + +int print_cpuinfo(void) +{ + u32 revision, type, model, rev, required_model = 1, required_rev = 1; + + revision = readl(SG_REVISION); + type = (revision & SG_REVISION_TYPE_MASK) >> SG_REVISION_TYPE_SHIFT; + model = (revision & SG_REVISION_MODEL_MASK) >> SG_REVISION_MODEL_SHIFT; + rev = (revision & SG_REVISION_REV_MASK) >> SG_REVISION_REV_SHIFT; + + puts("CPU: "); + + switch (type) { + case 0x25: + puts("PH1-sLD3 (MN2WS0220)"); + required_model = 2; + break; + case 0x26: + puts("PH1-LD4 (MN2WS0250)"); + required_rev = 2; + break; + case 0x28: + puts("PH1-Pro4 (MN2WS0230)"); + break; + case 0x29: + puts("PH1-sLD8 (MN2WS0270)"); + break; + default: + printf("Unknown Processor ID (0x%x)\n", revision); + return -1; + } + + if (model > 1) + printf(" model %d", model); + + printf(" (rev. %d)\n", rev); + + if (model < required_model) { + printf("Sorry, this model is not supported.\n"); + printf("Required model is %d.", required_model); + return -1; + } else if (rev < required_rev) { + printf("Sorry, this revision is not supported.\n"); + printf("Required revision is %d.", required_rev); + return -1; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/uniphier/dram_init.c b/arch/arm/cpu/armv7/uniphier/dram_init.c new file mode 100644 index 0000000..5465a0e --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/dram_init.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/led.h> + +int umc_init(void); +void enable_dpll_ssc(void); + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + +#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) + led_write(B, 4, , ); + + { + int res; + + res = umc_init(); + if (res < 0) + return res; + } + led_write(B, 5, , ); + + enable_dpll_ssc(); +#endif + + led_write(B, 6, , ); + + return 0; +} diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.c b/arch/arm/cpu/armv7/uniphier/init_page_table.c new file mode 100644 index 0000000..d273835 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/init_page_table.c @@ -0,0 +1,1068 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +/* encoding without TEX remap */ +#define NO_MAP 0x00000000 /* No Map */ +#define DEVICE 0x00002002 /* Non-shareable Device */ +#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */ + +#define SSC NORMAL /* System Cache: Normal */ +#define EXT DEVICE /* External Bus: Device */ +#define REG DEVICE /* IO Register: Device */ +#define DDR DEVICE /* DDR SDRAM: Device */ + +#ifdef CONFIG_SPL_BUILD +#define IS_SPL_TEXT_AREA(x) ((x) == ((CONFIG_SPL_TEXT_BASE) >> 20)) +#else +#define IS_SPL_TEXT_AREA(x) ((x) == ((CONFIG_SYS_TEXT_BASE) >> 20)) +#endif + +#define IS_INIT_STACK_AREA(x) ((x) == ((CONFIG_SYS_INIT_SP_ADDR) >> 20)) + +#define IS_SSC(x) ((IS_SPL_TEXT_AREA(x)) || \ + (IS_INIT_STACK_AREA(x))) +#define IS_EXT(x) ((x) < 0x100) +#define IS_REG(x) (0x500 <= (x) && (x) < 0x700) +#define IS_DDR(x) (0x800 <= (x) && (x) < 0xf00) + +#define MMU_FLAGS(x) (IS_SSC(x)) ? SSC : \ + (IS_EXT(x)) ? EXT : \ + (IS_REG(x)) ? REG : \ + (IS_DDR(x)) ? DDR : \ + NO_MAP + +#define TBL_ENTRY(x) (((x) << 20) | (MMU_FLAGS(x))) + +const u32 __aligned(PGTABLE_SIZE) init_page_table[PGTABLE_SIZE / sizeof(u32)] + = { + TBL_ENTRY(0x000), TBL_ENTRY(0x001), TBL_ENTRY(0x002), TBL_ENTRY(0x003), + TBL_ENTRY(0x004), TBL_ENTRY(0x005), TBL_ENTRY(0x006), TBL_ENTRY(0x007), + TBL_ENTRY(0x008), TBL_ENTRY(0x009), TBL_ENTRY(0x00a), TBL_ENTRY(0x00b), + TBL_ENTRY(0x00c), TBL_ENTRY(0x00d), TBL_ENTRY(0x00e), TBL_ENTRY(0x00f), + TBL_ENTRY(0x010), TBL_ENTRY(0x011), TBL_ENTRY(0x012), TBL_ENTRY(0x013), + TBL_ENTRY(0x014), TBL_ENTRY(0x015), TBL_ENTRY(0x016), TBL_ENTRY(0x017), + TBL_ENTRY(0x018), TBL_ENTRY(0x019), TBL_ENTRY(0x01a), TBL_ENTRY(0x01b), + TBL_ENTRY(0x01c), TBL_ENTRY(0x01d), TBL_ENTRY(0x01e), TBL_ENTRY(0x01f), + TBL_ENTRY(0x020), TBL_ENTRY(0x021), TBL_ENTRY(0x022), TBL_ENTRY(0x023), + TBL_ENTRY(0x024), TBL_ENTRY(0x025), TBL_ENTRY(0x026), TBL_ENTRY(0x027), + TBL_ENTRY(0x028), TBL_ENTRY(0x029), TBL_ENTRY(0x02a), TBL_ENTRY(0x02b), + TBL_ENTRY(0x02c), TBL_ENTRY(0x02d), TBL_ENTRY(0x02e), TBL_ENTRY(0x02f), + TBL_ENTRY(0x030), TBL_ENTRY(0x031), TBL_ENTRY(0x032), TBL_ENTRY(0x033), + TBL_ENTRY(0x034), TBL_ENTRY(0x035), TBL_ENTRY(0x036), TBL_ENTRY(0x037), + TBL_ENTRY(0x038), TBL_ENTRY(0x039), TBL_ENTRY(0x03a), TBL_ENTRY(0x03b), + TBL_ENTRY(0x03c), TBL_ENTRY(0x03d), TBL_ENTRY(0x03e), TBL_ENTRY(0x03f), + TBL_ENTRY(0x040), TBL_ENTRY(0x041), TBL_ENTRY(0x042), TBL_ENTRY(0x043), + TBL_ENTRY(0x044), TBL_ENTRY(0x045), TBL_ENTRY(0x046), TBL_ENTRY(0x047), + TBL_ENTRY(0x048), TBL_ENTRY(0x049), TBL_ENTRY(0x04a), TBL_ENTRY(0x04b), + TBL_ENTRY(0x04c), TBL_ENTRY(0x04d), TBL_ENTRY(0x04e), TBL_ENTRY(0x04f), + TBL_ENTRY(0x050), TBL_ENTRY(0x051), TBL_ENTRY(0x052), TBL_ENTRY(0x053), + TBL_ENTRY(0x054), TBL_ENTRY(0x055), TBL_ENTRY(0x056), TBL_ENTRY(0x057), + TBL_ENTRY(0x058), TBL_ENTRY(0x059), TBL_ENTRY(0x05a), TBL_ENTRY(0x05b), + TBL_ENTRY(0x05c), TBL_ENTRY(0x05d), TBL_ENTRY(0x05e), TBL_ENTRY(0x05f), + TBL_ENTRY(0x060), TBL_ENTRY(0x061), TBL_ENTRY(0x062), TBL_ENTRY(0x063), + TBL_ENTRY(0x064), TBL_ENTRY(0x065), TBL_ENTRY(0x066), TBL_ENTRY(0x067), + TBL_ENTRY(0x068), TBL_ENTRY(0x069), TBL_ENTRY(0x06a), TBL_ENTRY(0x06b), + TBL_ENTRY(0x06c), TBL_ENTRY(0x06d), TBL_ENTRY(0x06e), TBL_ENTRY(0x06f), + TBL_ENTRY(0x070), TBL_ENTRY(0x071), TBL_ENTRY(0x072), TBL_ENTRY(0x073), + TBL_ENTRY(0x074), TBL_ENTRY(0x075), TBL_ENTRY(0x076), TBL_ENTRY(0x077), + TBL_ENTRY(0x078), TBL_ENTRY(0x079), TBL_ENTRY(0x07a), TBL_ENTRY(0x07b), + TBL_ENTRY(0x07c), TBL_ENTRY(0x07d), TBL_ENTRY(0x07e), TBL_ENTRY(0x07f), + TBL_ENTRY(0x080), TBL_ENTRY(0x081), TBL_ENTRY(0x082), TBL_ENTRY(0x083), + TBL_ENTRY(0x084), TBL_ENTRY(0x085), TBL_ENTRY(0x086), TBL_ENTRY(0x087), + TBL_ENTRY(0x088), TBL_ENTRY(0x089), TBL_ENTRY(0x08a), TBL_ENTRY(0x08b), + TBL_ENTRY(0x08c), TBL_ENTRY(0x08d), TBL_ENTRY(0x08e), TBL_ENTRY(0x08f), + TBL_ENTRY(0x090), TBL_ENTRY(0x091), TBL_ENTRY(0x092), TBL_ENTRY(0x093), + TBL_ENTRY(0x094), TBL_ENTRY(0x095), TBL_ENTRY(0x096), TBL_ENTRY(0x097), + TBL_ENTRY(0x098), TBL_ENTRY(0x099), TBL_ENTRY(0x09a), TBL_ENTRY(0x09b), + TBL_ENTRY(0x09c), TBL_ENTRY(0x09d), TBL_ENTRY(0x09e), TBL_ENTRY(0x09f), + TBL_ENTRY(0x0a0), TBL_ENTRY(0x0a1), TBL_ENTRY(0x0a2), TBL_ENTRY(0x0a3), + TBL_ENTRY(0x0a4), TBL_ENTRY(0x0a5), TBL_ENTRY(0x0a6), TBL_ENTRY(0x0a7), + TBL_ENTRY(0x0a8), TBL_ENTRY(0x0a9), TBL_ENTRY(0x0aa), TBL_ENTRY(0x0ab), + TBL_ENTRY(0x0ac), TBL_ENTRY(0x0ad), TBL_ENTRY(0x0ae), TBL_ENTRY(0x0af), + TBL_ENTRY(0x0b0), TBL_ENTRY(0x0b1), TBL_ENTRY(0x0b2), TBL_ENTRY(0x0b3), + TBL_ENTRY(0x0b4), TBL_ENTRY(0x0b5), TBL_ENTRY(0x0b6), TBL_ENTRY(0x0b7), + TBL_ENTRY(0x0b8), TBL_ENTRY(0x0b9), TBL_ENTRY(0x0ba), TBL_ENTRY(0x0bb), + TBL_ENTRY(0x0bc), TBL_ENTRY(0x0bd), TBL_ENTRY(0x0be), TBL_ENTRY(0x0bf), + TBL_ENTRY(0x0c0), TBL_ENTRY(0x0c1), TBL_ENTRY(0x0c2), TBL_ENTRY(0x0c3), + TBL_ENTRY(0x0c4), TBL_ENTRY(0x0c5), TBL_ENTRY(0x0c6), TBL_ENTRY(0x0c7), + TBL_ENTRY(0x0c8), TBL_ENTRY(0x0c9), TBL_ENTRY(0x0ca), TBL_ENTRY(0x0cb), + TBL_ENTRY(0x0cc), TBL_ENTRY(0x0cd), TBL_ENTRY(0x0ce), TBL_ENTRY(0x0cf), + TBL_ENTRY(0x0d0), TBL_ENTRY(0x0d1), TBL_ENTRY(0x0d2), TBL_ENTRY(0x0d3), + TBL_ENTRY(0x0d4), TBL_ENTRY(0x0d5), TBL_ENTRY(0x0d6), TBL_ENTRY(0x0d7), + TBL_ENTRY(0x0d8), TBL_ENTRY(0x0d9), TBL_ENTRY(0x0da), TBL_ENTRY(0x0db), + TBL_ENTRY(0x0dc), TBL_ENTRY(0x0dd), TBL_ENTRY(0x0de), TBL_ENTRY(0x0df), + TBL_ENTRY(0x0e0), TBL_ENTRY(0x0e1), TBL_ENTRY(0x0e2), TBL_ENTRY(0x0e3), + TBL_ENTRY(0x0e4), TBL_ENTRY(0x0e5), TBL_ENTRY(0x0e6), TBL_ENTRY(0x0e7), + TBL_ENTRY(0x0e8), TBL_ENTRY(0x0e9), TBL_ENTRY(0x0ea), TBL_ENTRY(0x0eb), + TBL_ENTRY(0x0ec), TBL_ENTRY(0x0ed), TBL_ENTRY(0x0ee), TBL_ENTRY(0x0ef), + TBL_ENTRY(0x0f0), TBL_ENTRY(0x0f1), TBL_ENTRY(0x0f2), TBL_ENTRY(0x0f3), + TBL_ENTRY(0x0f4), TBL_ENTRY(0x0f5), TBL_ENTRY(0x0f6), TBL_ENTRY(0x0f7), + TBL_ENTRY(0x0f8), TBL_ENTRY(0x0f9), TBL_ENTRY(0x0fa), TBL_ENTRY(0x0fb), + TBL_ENTRY(0x0fc), TBL_ENTRY(0x0fd), TBL_ENTRY(0x0fe), TBL_ENTRY(0x0ff), + TBL_ENTRY(0x100), TBL_ENTRY(0x101), TBL_ENTRY(0x102), TBL_ENTRY(0x103), + TBL_ENTRY(0x104), TBL_ENTRY(0x105), TBL_ENTRY(0x106), TBL_ENTRY(0x107), + TBL_ENTRY(0x108), TBL_ENTRY(0x109), TBL_ENTRY(0x10a), TBL_ENTRY(0x10b), + TBL_ENTRY(0x10c), TBL_ENTRY(0x10d), TBL_ENTRY(0x10e), TBL_ENTRY(0x10f), + TBL_ENTRY(0x110), TBL_ENTRY(0x111), TBL_ENTRY(0x112), TBL_ENTRY(0x113), + TBL_ENTRY(0x114), TBL_ENTRY(0x115), TBL_ENTRY(0x116), TBL_ENTRY(0x117), + TBL_ENTRY(0x118), TBL_ENTRY(0x119), TBL_ENTRY(0x11a), TBL_ENTRY(0x11b), + TBL_ENTRY(0x11c), TBL_ENTRY(0x11d), TBL_ENTRY(0x11e), TBL_ENTRY(0x11f), + TBL_ENTRY(0x120), TBL_ENTRY(0x121), TBL_ENTRY(0x122), TBL_ENTRY(0x123), + TBL_ENTRY(0x124), TBL_ENTRY(0x125), TBL_ENTRY(0x126), TBL_ENTRY(0x127), + TBL_ENTRY(0x128), TBL_ENTRY(0x129), TBL_ENTRY(0x12a), TBL_ENTRY(0x12b), + TBL_ENTRY(0x12c), TBL_ENTRY(0x12d), TBL_ENTRY(0x12e), TBL_ENTRY(0x12f), + TBL_ENTRY(0x130), TBL_ENTRY(0x131), TBL_ENTRY(0x132), TBL_ENTRY(0x133), + TBL_ENTRY(0x134), TBL_ENTRY(0x135), TBL_ENTRY(0x136), TBL_ENTRY(0x137), + TBL_ENTRY(0x138), TBL_ENTRY(0x139), TBL_ENTRY(0x13a), TBL_ENTRY(0x13b), + TBL_ENTRY(0x13c), TBL_ENTRY(0x13d), TBL_ENTRY(0x13e), TBL_ENTRY(0x13f), + TBL_ENTRY(0x140), TBL_ENTRY(0x141), TBL_ENTRY(0x142), TBL_ENTRY(0x143), + TBL_ENTRY(0x144), TBL_ENTRY(0x145), TBL_ENTRY(0x146), TBL_ENTRY(0x147), + TBL_ENTRY(0x148), TBL_ENTRY(0x149), TBL_ENTRY(0x14a), TBL_ENTRY(0x14b), + TBL_ENTRY(0x14c), TBL_ENTRY(0x14d), TBL_ENTRY(0x14e), TBL_ENTRY(0x14f), + TBL_ENTRY(0x150), TBL_ENTRY(0x151), TBL_ENTRY(0x152), TBL_ENTRY(0x153), + TBL_ENTRY(0x154), TBL_ENTRY(0x155), TBL_ENTRY(0x156), TBL_ENTRY(0x157), + TBL_ENTRY(0x158), TBL_ENTRY(0x159), TBL_ENTRY(0x15a), TBL_ENTRY(0x15b), + TBL_ENTRY(0x15c), TBL_ENTRY(0x15d), TBL_ENTRY(0x15e), TBL_ENTRY(0x15f), + TBL_ENTRY(0x160), TBL_ENTRY(0x161), TBL_ENTRY(0x162), TBL_ENTRY(0x163), + TBL_ENTRY(0x164), TBL_ENTRY(0x165), TBL_ENTRY(0x166), TBL_ENTRY(0x167), + TBL_ENTRY(0x168), TBL_ENTRY(0x169), TBL_ENTRY(0x16a), TBL_ENTRY(0x16b), + TBL_ENTRY(0x16c), TBL_ENTRY(0x16d), TBL_ENTRY(0x16e), TBL_ENTRY(0x16f), + TBL_ENTRY(0x170), TBL_ENTRY(0x171), TBL_ENTRY(0x172), TBL_ENTRY(0x173), + TBL_ENTRY(0x174), TBL_ENTRY(0x175), TBL_ENTRY(0x176), TBL_ENTRY(0x177), + TBL_ENTRY(0x178), TBL_ENTRY(0x179), TBL_ENTRY(0x17a), TBL_ENTRY(0x17b), + TBL_ENTRY(0x17c), TBL_ENTRY(0x17d), TBL_ENTRY(0x17e), TBL_ENTRY(0x17f), + TBL_ENTRY(0x180), TBL_ENTRY(0x181), TBL_ENTRY(0x182), TBL_ENTRY(0x183), + TBL_ENTRY(0x184), TBL_ENTRY(0x185), TBL_ENTRY(0x186), TBL_ENTRY(0x187), + TBL_ENTRY(0x188), TBL_ENTRY(0x189), TBL_ENTRY(0x18a), TBL_ENTRY(0x18b), + TBL_ENTRY(0x18c), TBL_ENTRY(0x18d), TBL_ENTRY(0x18e), TBL_ENTRY(0x18f), + TBL_ENTRY(0x190), TBL_ENTRY(0x191), TBL_ENTRY(0x192), TBL_ENTRY(0x193), + TBL_ENTRY(0x194), TBL_ENTRY(0x195), TBL_ENTRY(0x196), TBL_ENTRY(0x197), + TBL_ENTRY(0x198), TBL_ENTRY(0x199), TBL_ENTRY(0x19a), TBL_ENTRY(0x19b), + TBL_ENTRY(0x19c), TBL_ENTRY(0x19d), TBL_ENTRY(0x19e), TBL_ENTRY(0x19f), + TBL_ENTRY(0x1a0), TBL_ENTRY(0x1a1), TBL_ENTRY(0x1a2), TBL_ENTRY(0x1a3), + TBL_ENTRY(0x1a4), TBL_ENTRY(0x1a5), TBL_ENTRY(0x1a6), TBL_ENTRY(0x1a7), + TBL_ENTRY(0x1a8), TBL_ENTRY(0x1a9), TBL_ENTRY(0x1aa), TBL_ENTRY(0x1ab), + TBL_ENTRY(0x1ac), TBL_ENTRY(0x1ad), TBL_ENTRY(0x1ae), TBL_ENTRY(0x1af), + TBL_ENTRY(0x1b0), TBL_ENTRY(0x1b1), TBL_ENTRY(0x1b2), TBL_ENTRY(0x1b3), + TBL_ENTRY(0x1b4), TBL_ENTRY(0x1b5), TBL_ENTRY(0x1b6), TBL_ENTRY(0x1b7), + TBL_ENTRY(0x1b8), TBL_ENTRY(0x1b9), TBL_ENTRY(0x1ba), TBL_ENTRY(0x1bb), + TBL_ENTRY(0x1bc), TBL_ENTRY(0x1bd), TBL_ENTRY(0x1be), TBL_ENTRY(0x1bf), + TBL_ENTRY(0x1c0), TBL_ENTRY(0x1c1), TBL_ENTRY(0x1c2), TBL_ENTRY(0x1c3), + TBL_ENTRY(0x1c4), TBL_ENTRY(0x1c5), TBL_ENTRY(0x1c6), TBL_ENTRY(0x1c7), + TBL_ENTRY(0x1c8), TBL_ENTRY(0x1c9), TBL_ENTRY(0x1ca), TBL_ENTRY(0x1cb), + TBL_ENTRY(0x1cc), TBL_ENTRY(0x1cd), TBL_ENTRY(0x1ce), TBL_ENTRY(0x1cf), + TBL_ENTRY(0x1d0), TBL_ENTRY(0x1d1), TBL_ENTRY(0x1d2), TBL_ENTRY(0x1d3), + TBL_ENTRY(0x1d4), TBL_ENTRY(0x1d5), TBL_ENTRY(0x1d6), TBL_ENTRY(0x1d7), + TBL_ENTRY(0x1d8), TBL_ENTRY(0x1d9), TBL_ENTRY(0x1da), TBL_ENTRY(0x1db), + TBL_ENTRY(0x1dc), TBL_ENTRY(0x1dd), TBL_ENTRY(0x1de), TBL_ENTRY(0x1df), + TBL_ENTRY(0x1e0), TBL_ENTRY(0x1e1), TBL_ENTRY(0x1e2), TBL_ENTRY(0x1e3), + TBL_ENTRY(0x1e4), TBL_ENTRY(0x1e5), TBL_ENTRY(0x1e6), TBL_ENTRY(0x1e7), + TBL_ENTRY(0x1e8), TBL_ENTRY(0x1e9), TBL_ENTRY(0x1ea), TBL_ENTRY(0x1eb), + TBL_ENTRY(0x1ec), TBL_ENTRY(0x1ed), TBL_ENTRY(0x1ee), TBL_ENTRY(0x1ef), + TBL_ENTRY(0x1f0), TBL_ENTRY(0x1f1), TBL_ENTRY(0x1f2), TBL_ENTRY(0x1f3), + TBL_ENTRY(0x1f4), TBL_ENTRY(0x1f5), TBL_ENTRY(0x1f6), TBL_ENTRY(0x1f7), + TBL_ENTRY(0x1f8), TBL_ENTRY(0x1f9), TBL_ENTRY(0x1fa), TBL_ENTRY(0x1fb), + TBL_ENTRY(0x1fc), TBL_ENTRY(0x1fd), TBL_ENTRY(0x1fe), TBL_ENTRY(0x1ff), + TBL_ENTRY(0x200), TBL_ENTRY(0x201), TBL_ENTRY(0x202), TBL_ENTRY(0x203), + TBL_ENTRY(0x204), TBL_ENTRY(0x205), TBL_ENTRY(0x206), TBL_ENTRY(0x207), + TBL_ENTRY(0x208), TBL_ENTRY(0x209), TBL_ENTRY(0x20a), TBL_ENTRY(0x20b), + TBL_ENTRY(0x20c), TBL_ENTRY(0x20d), TBL_ENTRY(0x20e), TBL_ENTRY(0x20f), + TBL_ENTRY(0x210), TBL_ENTRY(0x211), TBL_ENTRY(0x212), TBL_ENTRY(0x213), + TBL_ENTRY(0x214), TBL_ENTRY(0x215), TBL_ENTRY(0x216), TBL_ENTRY(0x217), + TBL_ENTRY(0x218), TBL_ENTRY(0x219), TBL_ENTRY(0x21a), TBL_ENTRY(0x21b), + TBL_ENTRY(0x21c), TBL_ENTRY(0x21d), TBL_ENTRY(0x21e), TBL_ENTRY(0x21f), + TBL_ENTRY(0x220), TBL_ENTRY(0x221), TBL_ENTRY(0x222), TBL_ENTRY(0x223), + TBL_ENTRY(0x224), TBL_ENTRY(0x225), TBL_ENTRY(0x226), TBL_ENTRY(0x227), + TBL_ENTRY(0x228), TBL_ENTRY(0x229), TBL_ENTRY(0x22a), TBL_ENTRY(0x22b), + TBL_ENTRY(0x22c), TBL_ENTRY(0x22d), TBL_ENTRY(0x22e), TBL_ENTRY(0x22f), + TBL_ENTRY(0x230), TBL_ENTRY(0x231), TBL_ENTRY(0x232), TBL_ENTRY(0x233), + TBL_ENTRY(0x234), TBL_ENTRY(0x235), TBL_ENTRY(0x236), TBL_ENTRY(0x237), + TBL_ENTRY(0x238), TBL_ENTRY(0x239), TBL_ENTRY(0x23a), TBL_ENTRY(0x23b), + TBL_ENTRY(0x23c), TBL_ENTRY(0x23d), TBL_ENTRY(0x23e), TBL_ENTRY(0x23f), + TBL_ENTRY(0x240), TBL_ENTRY(0x241), TBL_ENTRY(0x242), TBL_ENTRY(0x243), + TBL_ENTRY(0x244), TBL_ENTRY(0x245), TBL_ENTRY(0x246), TBL_ENTRY(0x247), + TBL_ENTRY(0x248), TBL_ENTRY(0x249), TBL_ENTRY(0x24a), TBL_ENTRY(0x24b), + TBL_ENTRY(0x24c), TBL_ENTRY(0x24d), TBL_ENTRY(0x24e), TBL_ENTRY(0x24f), + TBL_ENTRY(0x250), TBL_ENTRY(0x251), TBL_ENTRY(0x252), TBL_ENTRY(0x253), + TBL_ENTRY(0x254), TBL_ENTRY(0x255), TBL_ENTRY(0x256), TBL_ENTRY(0x257), + TBL_ENTRY(0x258), TBL_ENTRY(0x259), TBL_ENTRY(0x25a), TBL_ENTRY(0x25b), + TBL_ENTRY(0x25c), TBL_ENTRY(0x25d), TBL_ENTRY(0x25e), TBL_ENTRY(0x25f), + TBL_ENTRY(0x260), TBL_ENTRY(0x261), TBL_ENTRY(0x262), TBL_ENTRY(0x263), + TBL_ENTRY(0x264), TBL_ENTRY(0x265), TBL_ENTRY(0x266), TBL_ENTRY(0x267), + TBL_ENTRY(0x268), TBL_ENTRY(0x269), TBL_ENTRY(0x26a), TBL_ENTRY(0x26b), + TBL_ENTRY(0x26c), TBL_ENTRY(0x26d), TBL_ENTRY(0x26e), TBL_ENTRY(0x26f), + TBL_ENTRY(0x270), TBL_ENTRY(0x271), TBL_ENTRY(0x272), TBL_ENTRY(0x273), + TBL_ENTRY(0x274), TBL_ENTRY(0x275), TBL_ENTRY(0x276), TBL_ENTRY(0x277), + TBL_ENTRY(0x278), TBL_ENTRY(0x279), TBL_ENTRY(0x27a), TBL_ENTRY(0x27b), + TBL_ENTRY(0x27c), TBL_ENTRY(0x27d), TBL_ENTRY(0x27e), TBL_ENTRY(0x27f), + TBL_ENTRY(0x280), TBL_ENTRY(0x281), TBL_ENTRY(0x282), TBL_ENTRY(0x283), + TBL_ENTRY(0x284), TBL_ENTRY(0x285), TBL_ENTRY(0x286), TBL_ENTRY(0x287), + TBL_ENTRY(0x288), TBL_ENTRY(0x289), TBL_ENTRY(0x28a), TBL_ENTRY(0x28b), + TBL_ENTRY(0x28c), TBL_ENTRY(0x28d), TBL_ENTRY(0x28e), TBL_ENTRY(0x28f), + TBL_ENTRY(0x290), TBL_ENTRY(0x291), TBL_ENTRY(0x292), TBL_ENTRY(0x293), + TBL_ENTRY(0x294), TBL_ENTRY(0x295), TBL_ENTRY(0x296), TBL_ENTRY(0x297), + TBL_ENTRY(0x298), TBL_ENTRY(0x299), TBL_ENTRY(0x29a), TBL_ENTRY(0x29b), + TBL_ENTRY(0x29c), TBL_ENTRY(0x29d), TBL_ENTRY(0x29e), TBL_ENTRY(0x29f), + TBL_ENTRY(0x2a0), TBL_ENTRY(0x2a1), TBL_ENTRY(0x2a2), TBL_ENTRY(0x2a3), + TBL_ENTRY(0x2a4), TBL_ENTRY(0x2a5), TBL_ENTRY(0x2a6), TBL_ENTRY(0x2a7), + TBL_ENTRY(0x2a8), TBL_ENTRY(0x2a9), TBL_ENTRY(0x2aa), TBL_ENTRY(0x2ab), + TBL_ENTRY(0x2ac), TBL_ENTRY(0x2ad), TBL_ENTRY(0x2ae), TBL_ENTRY(0x2af), + TBL_ENTRY(0x2b0), TBL_ENTRY(0x2b1), TBL_ENTRY(0x2b2), TBL_ENTRY(0x2b3), + TBL_ENTRY(0x2b4), TBL_ENTRY(0x2b5), TBL_ENTRY(0x2b6), TBL_ENTRY(0x2b7), + TBL_ENTRY(0x2b8), TBL_ENTRY(0x2b9), TBL_ENTRY(0x2ba), TBL_ENTRY(0x2bb), + TBL_ENTRY(0x2bc), TBL_ENTRY(0x2bd), TBL_ENTRY(0x2be), TBL_ENTRY(0x2bf), + TBL_ENTRY(0x2c0), TBL_ENTRY(0x2c1), TBL_ENTRY(0x2c2), TBL_ENTRY(0x2c3), + TBL_ENTRY(0x2c4), TBL_ENTRY(0x2c5), TBL_ENTRY(0x2c6), TBL_ENTRY(0x2c7), + TBL_ENTRY(0x2c8), TBL_ENTRY(0x2c9), TBL_ENTRY(0x2ca), TBL_ENTRY(0x2cb), + TBL_ENTRY(0x2cc), TBL_ENTRY(0x2cd), TBL_ENTRY(0x2ce), TBL_ENTRY(0x2cf), + TBL_ENTRY(0x2d0), TBL_ENTRY(0x2d1), TBL_ENTRY(0x2d2), TBL_ENTRY(0x2d3), + TBL_ENTRY(0x2d4), TBL_ENTRY(0x2d5), TBL_ENTRY(0x2d6), TBL_ENTRY(0x2d7), + TBL_ENTRY(0x2d8), TBL_ENTRY(0x2d9), TBL_ENTRY(0x2da), TBL_ENTRY(0x2db), + TBL_ENTRY(0x2dc), TBL_ENTRY(0x2dd), TBL_ENTRY(0x2de), TBL_ENTRY(0x2df), + TBL_ENTRY(0x2e0), TBL_ENTRY(0x2e1), TBL_ENTRY(0x2e2), TBL_ENTRY(0x2e3), + TBL_ENTRY(0x2e4), TBL_ENTRY(0x2e5), TBL_ENTRY(0x2e6), TBL_ENTRY(0x2e7), + TBL_ENTRY(0x2e8), TBL_ENTRY(0x2e9), TBL_ENTRY(0x2ea), TBL_ENTRY(0x2eb), + TBL_ENTRY(0x2ec), TBL_ENTRY(0x2ed), TBL_ENTRY(0x2ee), TBL_ENTRY(0x2ef), + TBL_ENTRY(0x2f0), TBL_ENTRY(0x2f1), TBL_ENTRY(0x2f2), TBL_ENTRY(0x2f3), + TBL_ENTRY(0x2f4), TBL_ENTRY(0x2f5), TBL_ENTRY(0x2f6), TBL_ENTRY(0x2f7), + TBL_ENTRY(0x2f8), TBL_ENTRY(0x2f9), TBL_ENTRY(0x2fa), TBL_ENTRY(0x2fb), + TBL_ENTRY(0x2fc), TBL_ENTRY(0x2fd), TBL_ENTRY(0x2fe), TBL_ENTRY(0x2ff), + TBL_ENTRY(0x300), TBL_ENTRY(0x301), TBL_ENTRY(0x302), TBL_ENTRY(0x303), + TBL_ENTRY(0x304), TBL_ENTRY(0x305), TBL_ENTRY(0x306), TBL_ENTRY(0x307), + TBL_ENTRY(0x308), TBL_ENTRY(0x309), TBL_ENTRY(0x30a), TBL_ENTRY(0x30b), + TBL_ENTRY(0x30c), TBL_ENTRY(0x30d), TBL_ENTRY(0x30e), TBL_ENTRY(0x30f), + TBL_ENTRY(0x310), TBL_ENTRY(0x311), TBL_ENTRY(0x312), TBL_ENTRY(0x313), + TBL_ENTRY(0x314), TBL_ENTRY(0x315), TBL_ENTRY(0x316), TBL_ENTRY(0x317), + TBL_ENTRY(0x318), TBL_ENTRY(0x319), TBL_ENTRY(0x31a), TBL_ENTRY(0x31b), + TBL_ENTRY(0x31c), TBL_ENTRY(0x31d), TBL_ENTRY(0x31e), TBL_ENTRY(0x31f), + TBL_ENTRY(0x320), TBL_ENTRY(0x321), TBL_ENTRY(0x322), TBL_ENTRY(0x323), + TBL_ENTRY(0x324), TBL_ENTRY(0x325), TBL_ENTRY(0x326), TBL_ENTRY(0x327), + TBL_ENTRY(0x328), TBL_ENTRY(0x329), TBL_ENTRY(0x32a), TBL_ENTRY(0x32b), + TBL_ENTRY(0x32c), TBL_ENTRY(0x32d), TBL_ENTRY(0x32e), TBL_ENTRY(0x32f), + TBL_ENTRY(0x330), TBL_ENTRY(0x331), TBL_ENTRY(0x332), TBL_ENTRY(0x333), + TBL_ENTRY(0x334), TBL_ENTRY(0x335), TBL_ENTRY(0x336), TBL_ENTRY(0x337), + TBL_ENTRY(0x338), TBL_ENTRY(0x339), TBL_ENTRY(0x33a), TBL_ENTRY(0x33b), + TBL_ENTRY(0x33c), TBL_ENTRY(0x33d), TBL_ENTRY(0x33e), TBL_ENTRY(0x33f), + TBL_ENTRY(0x340), TBL_ENTRY(0x341), TBL_ENTRY(0x342), TBL_ENTRY(0x343), + TBL_ENTRY(0x344), TBL_ENTRY(0x345), TBL_ENTRY(0x346), TBL_ENTRY(0x347), + TBL_ENTRY(0x348), TBL_ENTRY(0x349), TBL_ENTRY(0x34a), TBL_ENTRY(0x34b), + TBL_ENTRY(0x34c), TBL_ENTRY(0x34d), TBL_ENTRY(0x34e), TBL_ENTRY(0x34f), + TBL_ENTRY(0x350), TBL_ENTRY(0x351), TBL_ENTRY(0x352), TBL_ENTRY(0x353), + TBL_ENTRY(0x354), TBL_ENTRY(0x355), TBL_ENTRY(0x356), TBL_ENTRY(0x357), + TBL_ENTRY(0x358), TBL_ENTRY(0x359), TBL_ENTRY(0x35a), TBL_ENTRY(0x35b), + TBL_ENTRY(0x35c), TBL_ENTRY(0x35d), TBL_ENTRY(0x35e), TBL_ENTRY(0x35f), + TBL_ENTRY(0x360), TBL_ENTRY(0x361), TBL_ENTRY(0x362), TBL_ENTRY(0x363), + TBL_ENTRY(0x364), TBL_ENTRY(0x365), TBL_ENTRY(0x366), TBL_ENTRY(0x367), + TBL_ENTRY(0x368), TBL_ENTRY(0x369), TBL_ENTRY(0x36a), TBL_ENTRY(0x36b), + TBL_ENTRY(0x36c), TBL_ENTRY(0x36d), TBL_ENTRY(0x36e), TBL_ENTRY(0x36f), + TBL_ENTRY(0x370), TBL_ENTRY(0x371), TBL_ENTRY(0x372), TBL_ENTRY(0x373), + TBL_ENTRY(0x374), TBL_ENTRY(0x375), TBL_ENTRY(0x376), TBL_ENTRY(0x377), + TBL_ENTRY(0x378), TBL_ENTRY(0x379), TBL_ENTRY(0x37a), TBL_ENTRY(0x37b), + TBL_ENTRY(0x37c), TBL_ENTRY(0x37d), TBL_ENTRY(0x37e), TBL_ENTRY(0x37f), + TBL_ENTRY(0x380), TBL_ENTRY(0x381), TBL_ENTRY(0x382), TBL_ENTRY(0x383), + TBL_ENTRY(0x384), TBL_ENTRY(0x385), TBL_ENTRY(0x386), TBL_ENTRY(0x387), + TBL_ENTRY(0x388), TBL_ENTRY(0x389), TBL_ENTRY(0x38a), TBL_ENTRY(0x38b), + TBL_ENTRY(0x38c), TBL_ENTRY(0x38d), TBL_ENTRY(0x38e), TBL_ENTRY(0x38f), + TBL_ENTRY(0x390), TBL_ENTRY(0x391), TBL_ENTRY(0x392), TBL_ENTRY(0x393), + TBL_ENTRY(0x394), TBL_ENTRY(0x395), TBL_ENTRY(0x396), TBL_ENTRY(0x397), + TBL_ENTRY(0x398), TBL_ENTRY(0x399), TBL_ENTRY(0x39a), TBL_ENTRY(0x39b), + TBL_ENTRY(0x39c), TBL_ENTRY(0x39d), TBL_ENTRY(0x39e), TBL_ENTRY(0x39f), + TBL_ENTRY(0x3a0), TBL_ENTRY(0x3a1), TBL_ENTRY(0x3a2), TBL_ENTRY(0x3a3), + TBL_ENTRY(0x3a4), TBL_ENTRY(0x3a5), TBL_ENTRY(0x3a6), TBL_ENTRY(0x3a7), + TBL_ENTRY(0x3a8), TBL_ENTRY(0x3a9), TBL_ENTRY(0x3aa), TBL_ENTRY(0x3ab), + TBL_ENTRY(0x3ac), TBL_ENTRY(0x3ad), TBL_ENTRY(0x3ae), TBL_ENTRY(0x3af), + TBL_ENTRY(0x3b0), TBL_ENTRY(0x3b1), TBL_ENTRY(0x3b2), TBL_ENTRY(0x3b3), + TBL_ENTRY(0x3b4), TBL_ENTRY(0x3b5), TBL_ENTRY(0x3b6), TBL_ENTRY(0x3b7), + TBL_ENTRY(0x3b8), TBL_ENTRY(0x3b9), TBL_ENTRY(0x3ba), TBL_ENTRY(0x3bb), + TBL_ENTRY(0x3bc), TBL_ENTRY(0x3bd), TBL_ENTRY(0x3be), TBL_ENTRY(0x3bf), + TBL_ENTRY(0x3c0), TBL_ENTRY(0x3c1), TBL_ENTRY(0x3c2), TBL_ENTRY(0x3c3), + TBL_ENTRY(0x3c4), TBL_ENTRY(0x3c5), TBL_ENTRY(0x3c6), TBL_ENTRY(0x3c7), + TBL_ENTRY(0x3c8), TBL_ENTRY(0x3c9), TBL_ENTRY(0x3ca), TBL_ENTRY(0x3cb), + TBL_ENTRY(0x3cc), TBL_ENTRY(0x3cd), TBL_ENTRY(0x3ce), TBL_ENTRY(0x3cf), + TBL_ENTRY(0x3d0), TBL_ENTRY(0x3d1), TBL_ENTRY(0x3d2), TBL_ENTRY(0x3d3), + TBL_ENTRY(0x3d4), TBL_ENTRY(0x3d5), TBL_ENTRY(0x3d6), TBL_ENTRY(0x3d7), + TBL_ENTRY(0x3d8), TBL_ENTRY(0x3d9), TBL_ENTRY(0x3da), TBL_ENTRY(0x3db), + TBL_ENTRY(0x3dc), TBL_ENTRY(0x3dd), TBL_ENTRY(0x3de), TBL_ENTRY(0x3df), + TBL_ENTRY(0x3e0), TBL_ENTRY(0x3e1), TBL_ENTRY(0x3e2), TBL_ENTRY(0x3e3), + TBL_ENTRY(0x3e4), TBL_ENTRY(0x3e5), TBL_ENTRY(0x3e6), TBL_ENTRY(0x3e7), + TBL_ENTRY(0x3e8), TBL_ENTRY(0x3e9), TBL_ENTRY(0x3ea), TBL_ENTRY(0x3eb), + TBL_ENTRY(0x3ec), TBL_ENTRY(0x3ed), TBL_ENTRY(0x3ee), TBL_ENTRY(0x3ef), + TBL_ENTRY(0x3f0), TBL_ENTRY(0x3f1), TBL_ENTRY(0x3f2), TBL_ENTRY(0x3f3), + TBL_ENTRY(0x3f4), TBL_ENTRY(0x3f5), TBL_ENTRY(0x3f6), TBL_ENTRY(0x3f7), + TBL_ENTRY(0x3f8), TBL_ENTRY(0x3f9), TBL_ENTRY(0x3fa), TBL_ENTRY(0x3fb), + TBL_ENTRY(0x3fc), TBL_ENTRY(0x3fd), TBL_ENTRY(0x3fe), TBL_ENTRY(0x3ff), + TBL_ENTRY(0x400), TBL_ENTRY(0x401), TBL_ENTRY(0x402), TBL_ENTRY(0x403), + TBL_ENTRY(0x404), TBL_ENTRY(0x405), TBL_ENTRY(0x406), TBL_ENTRY(0x407), + TBL_ENTRY(0x408), TBL_ENTRY(0x409), TBL_ENTRY(0x40a), TBL_ENTRY(0x40b), + TBL_ENTRY(0x40c), TBL_ENTRY(0x40d), TBL_ENTRY(0x40e), TBL_ENTRY(0x40f), + TBL_ENTRY(0x410), TBL_ENTRY(0x411), TBL_ENTRY(0x412), TBL_ENTRY(0x413), + TBL_ENTRY(0x414), TBL_ENTRY(0x415), TBL_ENTRY(0x416), TBL_ENTRY(0x417), + TBL_ENTRY(0x418), TBL_ENTRY(0x419), TBL_ENTRY(0x41a), TBL_ENTRY(0x41b), + TBL_ENTRY(0x41c), TBL_ENTRY(0x41d), TBL_ENTRY(0x41e), TBL_ENTRY(0x41f), + TBL_ENTRY(0x420), TBL_ENTRY(0x421), TBL_ENTRY(0x422), TBL_ENTRY(0x423), + TBL_ENTRY(0x424), TBL_ENTRY(0x425), TBL_ENTRY(0x426), TBL_ENTRY(0x427), + TBL_ENTRY(0x428), TBL_ENTRY(0x429), TBL_ENTRY(0x42a), TBL_ENTRY(0x42b), + TBL_ENTRY(0x42c), TBL_ENTRY(0x42d), TBL_ENTRY(0x42e), TBL_ENTRY(0x42f), + TBL_ENTRY(0x430), TBL_ENTRY(0x431), TBL_ENTRY(0x432), TBL_ENTRY(0x433), + TBL_ENTRY(0x434), TBL_ENTRY(0x435), TBL_ENTRY(0x436), TBL_ENTRY(0x437), + TBL_ENTRY(0x438), TBL_ENTRY(0x439), TBL_ENTRY(0x43a), TBL_ENTRY(0x43b), + TBL_ENTRY(0x43c), TBL_ENTRY(0x43d), TBL_ENTRY(0x43e), TBL_ENTRY(0x43f), + TBL_ENTRY(0x440), TBL_ENTRY(0x441), TBL_ENTRY(0x442), TBL_ENTRY(0x443), + TBL_ENTRY(0x444), TBL_ENTRY(0x445), TBL_ENTRY(0x446), TBL_ENTRY(0x447), + TBL_ENTRY(0x448), TBL_ENTRY(0x449), TBL_ENTRY(0x44a), TBL_ENTRY(0x44b), + TBL_ENTRY(0x44c), TBL_ENTRY(0x44d), TBL_ENTRY(0x44e), TBL_ENTRY(0x44f), + TBL_ENTRY(0x450), TBL_ENTRY(0x451), TBL_ENTRY(0x452), TBL_ENTRY(0x453), + TBL_ENTRY(0x454), TBL_ENTRY(0x455), TBL_ENTRY(0x456), TBL_ENTRY(0x457), + TBL_ENTRY(0x458), TBL_ENTRY(0x459), TBL_ENTRY(0x45a), TBL_ENTRY(0x45b), + TBL_ENTRY(0x45c), TBL_ENTRY(0x45d), TBL_ENTRY(0x45e), TBL_ENTRY(0x45f), + TBL_ENTRY(0x460), TBL_ENTRY(0x461), TBL_ENTRY(0x462), TBL_ENTRY(0x463), + TBL_ENTRY(0x464), TBL_ENTRY(0x465), TBL_ENTRY(0x466), TBL_ENTRY(0x467), + TBL_ENTRY(0x468), TBL_ENTRY(0x469), TBL_ENTRY(0x46a), TBL_ENTRY(0x46b), + TBL_ENTRY(0x46c), TBL_ENTRY(0x46d), TBL_ENTRY(0x46e), TBL_ENTRY(0x46f), + TBL_ENTRY(0x470), TBL_ENTRY(0x471), TBL_ENTRY(0x472), TBL_ENTRY(0x473), + TBL_ENTRY(0x474), TBL_ENTRY(0x475), TBL_ENTRY(0x476), TBL_ENTRY(0x477), + TBL_ENTRY(0x478), TBL_ENTRY(0x479), TBL_ENTRY(0x47a), TBL_ENTRY(0x47b), + TBL_ENTRY(0x47c), TBL_ENTRY(0x47d), TBL_ENTRY(0x47e), TBL_ENTRY(0x47f), + TBL_ENTRY(0x480), TBL_ENTRY(0x481), TBL_ENTRY(0x482), TBL_ENTRY(0x483), + TBL_ENTRY(0x484), TBL_ENTRY(0x485), TBL_ENTRY(0x486), TBL_ENTRY(0x487), + TBL_ENTRY(0x488), TBL_ENTRY(0x489), TBL_ENTRY(0x48a), TBL_ENTRY(0x48b), + TBL_ENTRY(0x48c), TBL_ENTRY(0x48d), TBL_ENTRY(0x48e), TBL_ENTRY(0x48f), + TBL_ENTRY(0x490), TBL_ENTRY(0x491), TBL_ENTRY(0x492), TBL_ENTRY(0x493), + TBL_ENTRY(0x494), TBL_ENTRY(0x495), TBL_ENTRY(0x496), TBL_ENTRY(0x497), + TBL_ENTRY(0x498), TBL_ENTRY(0x499), TBL_ENTRY(0x49a), TBL_ENTRY(0x49b), + TBL_ENTRY(0x49c), TBL_ENTRY(0x49d), TBL_ENTRY(0x49e), TBL_ENTRY(0x49f), + TBL_ENTRY(0x4a0), TBL_ENTRY(0x4a1), TBL_ENTRY(0x4a2), TBL_ENTRY(0x4a3), + TBL_ENTRY(0x4a4), TBL_ENTRY(0x4a5), TBL_ENTRY(0x4a6), TBL_ENTRY(0x4a7), + TBL_ENTRY(0x4a8), TBL_ENTRY(0x4a9), TBL_ENTRY(0x4aa), TBL_ENTRY(0x4ab), + TBL_ENTRY(0x4ac), TBL_ENTRY(0x4ad), TBL_ENTRY(0x4ae), TBL_ENTRY(0x4af), + TBL_ENTRY(0x4b0), TBL_ENTRY(0x4b1), TBL_ENTRY(0x4b2), TBL_ENTRY(0x4b3), + TBL_ENTRY(0x4b4), TBL_ENTRY(0x4b5), TBL_ENTRY(0x4b6), TBL_ENTRY(0x4b7), + TBL_ENTRY(0x4b8), TBL_ENTRY(0x4b9), TBL_ENTRY(0x4ba), TBL_ENTRY(0x4bb), + TBL_ENTRY(0x4bc), TBL_ENTRY(0x4bd), TBL_ENTRY(0x4be), TBL_ENTRY(0x4bf), + TBL_ENTRY(0x4c0), TBL_ENTRY(0x4c1), TBL_ENTRY(0x4c2), TBL_ENTRY(0x4c3), + TBL_ENTRY(0x4c4), TBL_ENTRY(0x4c5), TBL_ENTRY(0x4c6), TBL_ENTRY(0x4c7), + TBL_ENTRY(0x4c8), TBL_ENTRY(0x4c9), TBL_ENTRY(0x4ca), TBL_ENTRY(0x4cb), + TBL_ENTRY(0x4cc), TBL_ENTRY(0x4cd), TBL_ENTRY(0x4ce), TBL_ENTRY(0x4cf), + TBL_ENTRY(0x4d0), TBL_ENTRY(0x4d1), TBL_ENTRY(0x4d2), TBL_ENTRY(0x4d3), + TBL_ENTRY(0x4d4), TBL_ENTRY(0x4d5), TBL_ENTRY(0x4d6), TBL_ENTRY(0x4d7), + TBL_ENTRY(0x4d8), TBL_ENTRY(0x4d9), TBL_ENTRY(0x4da), TBL_ENTRY(0x4db), + TBL_ENTRY(0x4dc), TBL_ENTRY(0x4dd), TBL_ENTRY(0x4de), TBL_ENTRY(0x4df), + TBL_ENTRY(0x4e0), TBL_ENTRY(0x4e1), TBL_ENTRY(0x4e2), TBL_ENTRY(0x4e3), + TBL_ENTRY(0x4e4), TBL_ENTRY(0x4e5), TBL_ENTRY(0x4e6), TBL_ENTRY(0x4e7), + TBL_ENTRY(0x4e8), TBL_ENTRY(0x4e9), TBL_ENTRY(0x4ea), TBL_ENTRY(0x4eb), + TBL_ENTRY(0x4ec), TBL_ENTRY(0x4ed), TBL_ENTRY(0x4ee), TBL_ENTRY(0x4ef), + TBL_ENTRY(0x4f0), TBL_ENTRY(0x4f1), TBL_ENTRY(0x4f2), TBL_ENTRY(0x4f3), + TBL_ENTRY(0x4f4), TBL_ENTRY(0x4f5), TBL_ENTRY(0x4f6), TBL_ENTRY(0x4f7), + TBL_ENTRY(0x4f8), TBL_ENTRY(0x4f9), TBL_ENTRY(0x4fa), TBL_ENTRY(0x4fb), + TBL_ENTRY(0x4fc), TBL_ENTRY(0x4fd), TBL_ENTRY(0x4fe), TBL_ENTRY(0x4ff), + TBL_ENTRY(0x500), TBL_ENTRY(0x501), TBL_ENTRY(0x502), TBL_ENTRY(0x503), + TBL_ENTRY(0x504), TBL_ENTRY(0x505), TBL_ENTRY(0x506), TBL_ENTRY(0x507), + TBL_ENTRY(0x508), TBL_ENTRY(0x509), TBL_ENTRY(0x50a), TBL_ENTRY(0x50b), + TBL_ENTRY(0x50c), TBL_ENTRY(0x50d), TBL_ENTRY(0x50e), TBL_ENTRY(0x50f), + TBL_ENTRY(0x510), TBL_ENTRY(0x511), TBL_ENTRY(0x512), TBL_ENTRY(0x513), + TBL_ENTRY(0x514), TBL_ENTRY(0x515), TBL_ENTRY(0x516), TBL_ENTRY(0x517), + TBL_ENTRY(0x518), TBL_ENTRY(0x519), TBL_ENTRY(0x51a), TBL_ENTRY(0x51b), + TBL_ENTRY(0x51c), TBL_ENTRY(0x51d), TBL_ENTRY(0x51e), TBL_ENTRY(0x51f), + TBL_ENTRY(0x520), TBL_ENTRY(0x521), TBL_ENTRY(0x522), TBL_ENTRY(0x523), + TBL_ENTRY(0x524), TBL_ENTRY(0x525), TBL_ENTRY(0x526), TBL_ENTRY(0x527), + TBL_ENTRY(0x528), TBL_ENTRY(0x529), TBL_ENTRY(0x52a), TBL_ENTRY(0x52b), + TBL_ENTRY(0x52c), TBL_ENTRY(0x52d), TBL_ENTRY(0x52e), TBL_ENTRY(0x52f), + TBL_ENTRY(0x530), TBL_ENTRY(0x531), TBL_ENTRY(0x532), TBL_ENTRY(0x533), + TBL_ENTRY(0x534), TBL_ENTRY(0x535), TBL_ENTRY(0x536), TBL_ENTRY(0x537), + TBL_ENTRY(0x538), TBL_ENTRY(0x539), TBL_ENTRY(0x53a), TBL_ENTRY(0x53b), + TBL_ENTRY(0x53c), TBL_ENTRY(0x53d), TBL_ENTRY(0x53e), TBL_ENTRY(0x53f), + TBL_ENTRY(0x540), TBL_ENTRY(0x541), TBL_ENTRY(0x542), TBL_ENTRY(0x543), + TBL_ENTRY(0x544), TBL_ENTRY(0x545), TBL_ENTRY(0x546), TBL_ENTRY(0x547), + TBL_ENTRY(0x548), TBL_ENTRY(0x549), TBL_ENTRY(0x54a), TBL_ENTRY(0x54b), + TBL_ENTRY(0x54c), TBL_ENTRY(0x54d), TBL_ENTRY(0x54e), TBL_ENTRY(0x54f), + TBL_ENTRY(0x550), TBL_ENTRY(0x551), TBL_ENTRY(0x552), TBL_ENTRY(0x553), + TBL_ENTRY(0x554), TBL_ENTRY(0x555), TBL_ENTRY(0x556), TBL_ENTRY(0x557), + TBL_ENTRY(0x558), TBL_ENTRY(0x559), TBL_ENTRY(0x55a), TBL_ENTRY(0x55b), + TBL_ENTRY(0x55c), TBL_ENTRY(0x55d), TBL_ENTRY(0x55e), TBL_ENTRY(0x55f), + TBL_ENTRY(0x560), TBL_ENTRY(0x561), TBL_ENTRY(0x562), TBL_ENTRY(0x563), + TBL_ENTRY(0x564), TBL_ENTRY(0x565), TBL_ENTRY(0x566), TBL_ENTRY(0x567), + TBL_ENTRY(0x568), TBL_ENTRY(0x569), TBL_ENTRY(0x56a), TBL_ENTRY(0x56b), + TBL_ENTRY(0x56c), TBL_ENTRY(0x56d), TBL_ENTRY(0x56e), TBL_ENTRY(0x56f), + TBL_ENTRY(0x570), TBL_ENTRY(0x571), TBL_ENTRY(0x572), TBL_ENTRY(0x573), + TBL_ENTRY(0x574), TBL_ENTRY(0x575), TBL_ENTRY(0x576), TBL_ENTRY(0x577), + TBL_ENTRY(0x578), TBL_ENTRY(0x579), TBL_ENTRY(0x57a), TBL_ENTRY(0x57b), + TBL_ENTRY(0x57c), TBL_ENTRY(0x57d), TBL_ENTRY(0x57e), TBL_ENTRY(0x57f), + TBL_ENTRY(0x580), TBL_ENTRY(0x581), TBL_ENTRY(0x582), TBL_ENTRY(0x583), + TBL_ENTRY(0x584), TBL_ENTRY(0x585), TBL_ENTRY(0x586), TBL_ENTRY(0x587), + TBL_ENTRY(0x588), TBL_ENTRY(0x589), TBL_ENTRY(0x58a), TBL_ENTRY(0x58b), + TBL_ENTRY(0x58c), TBL_ENTRY(0x58d), TBL_ENTRY(0x58e), TBL_ENTRY(0x58f), + TBL_ENTRY(0x590), TBL_ENTRY(0x591), TBL_ENTRY(0x592), TBL_ENTRY(0x593), + TBL_ENTRY(0x594), TBL_ENTRY(0x595), TBL_ENTRY(0x596), TBL_ENTRY(0x597), + TBL_ENTRY(0x598), TBL_ENTRY(0x599), TBL_ENTRY(0x59a), TBL_ENTRY(0x59b), + TBL_ENTRY(0x59c), TBL_ENTRY(0x59d), TBL_ENTRY(0x59e), TBL_ENTRY(0x59f), + TBL_ENTRY(0x5a0), TBL_ENTRY(0x5a1), TBL_ENTRY(0x5a2), TBL_ENTRY(0x5a3), + TBL_ENTRY(0x5a4), TBL_ENTRY(0x5a5), TBL_ENTRY(0x5a6), TBL_ENTRY(0x5a7), + TBL_ENTRY(0x5a8), TBL_ENTRY(0x5a9), TBL_ENTRY(0x5aa), TBL_ENTRY(0x5ab), + TBL_ENTRY(0x5ac), TBL_ENTRY(0x5ad), TBL_ENTRY(0x5ae), TBL_ENTRY(0x5af), + TBL_ENTRY(0x5b0), TBL_ENTRY(0x5b1), TBL_ENTRY(0x5b2), TBL_ENTRY(0x5b3), + TBL_ENTRY(0x5b4), TBL_ENTRY(0x5b5), TBL_ENTRY(0x5b6), TBL_ENTRY(0x5b7), + TBL_ENTRY(0x5b8), TBL_ENTRY(0x5b9), TBL_ENTRY(0x5ba), TBL_ENTRY(0x5bb), + TBL_ENTRY(0x5bc), TBL_ENTRY(0x5bd), TBL_ENTRY(0x5be), TBL_ENTRY(0x5bf), + TBL_ENTRY(0x5c0), TBL_ENTRY(0x5c1), TBL_ENTRY(0x5c2), TBL_ENTRY(0x5c3), + TBL_ENTRY(0x5c4), TBL_ENTRY(0x5c5), TBL_ENTRY(0x5c6), TBL_ENTRY(0x5c7), + TBL_ENTRY(0x5c8), TBL_ENTRY(0x5c9), TBL_ENTRY(0x5ca), TBL_ENTRY(0x5cb), + TBL_ENTRY(0x5cc), TBL_ENTRY(0x5cd), TBL_ENTRY(0x5ce), TBL_ENTRY(0x5cf), + TBL_ENTRY(0x5d0), TBL_ENTRY(0x5d1), TBL_ENTRY(0x5d2), TBL_ENTRY(0x5d3), + TBL_ENTRY(0x5d4), TBL_ENTRY(0x5d5), TBL_ENTRY(0x5d6), TBL_ENTRY(0x5d7), + TBL_ENTRY(0x5d8), TBL_ENTRY(0x5d9), TBL_ENTRY(0x5da), TBL_ENTRY(0x5db), + TBL_ENTRY(0x5dc), TBL_ENTRY(0x5dd), TBL_ENTRY(0x5de), TBL_ENTRY(0x5df), + TBL_ENTRY(0x5e0), TBL_ENTRY(0x5e1), TBL_ENTRY(0x5e2), TBL_ENTRY(0x5e3), + TBL_ENTRY(0x5e4), TBL_ENTRY(0x5e5), TBL_ENTRY(0x5e6), TBL_ENTRY(0x5e7), + TBL_ENTRY(0x5e8), TBL_ENTRY(0x5e9), TBL_ENTRY(0x5ea), TBL_ENTRY(0x5eb), + TBL_ENTRY(0x5ec), TBL_ENTRY(0x5ed), TBL_ENTRY(0x5ee), TBL_ENTRY(0x5ef), + TBL_ENTRY(0x5f0), TBL_ENTRY(0x5f1), TBL_ENTRY(0x5f2), TBL_ENTRY(0x5f3), + TBL_ENTRY(0x5f4), TBL_ENTRY(0x5f5), TBL_ENTRY(0x5f6), TBL_ENTRY(0x5f7), + TBL_ENTRY(0x5f8), TBL_ENTRY(0x5f9), TBL_ENTRY(0x5fa), TBL_ENTRY(0x5fb), + TBL_ENTRY(0x5fc), TBL_ENTRY(0x5fd), TBL_ENTRY(0x5fe), TBL_ENTRY(0x5ff), + TBL_ENTRY(0x600), TBL_ENTRY(0x601), TBL_ENTRY(0x602), TBL_ENTRY(0x603), + TBL_ENTRY(0x604), TBL_ENTRY(0x605), TBL_ENTRY(0x606), TBL_ENTRY(0x607), + TBL_ENTRY(0x608), TBL_ENTRY(0x609), TBL_ENTRY(0x60a), TBL_ENTRY(0x60b), + TBL_ENTRY(0x60c), TBL_ENTRY(0x60d), TBL_ENTRY(0x60e), TBL_ENTRY(0x60f), + TBL_ENTRY(0x610), TBL_ENTRY(0x611), TBL_ENTRY(0x612), TBL_ENTRY(0x613), + TBL_ENTRY(0x614), TBL_ENTRY(0x615), TBL_ENTRY(0x616), TBL_ENTRY(0x617), + TBL_ENTRY(0x618), TBL_ENTRY(0x619), TBL_ENTRY(0x61a), TBL_ENTRY(0x61b), + TBL_ENTRY(0x61c), TBL_ENTRY(0x61d), TBL_ENTRY(0x61e), TBL_ENTRY(0x61f), + TBL_ENTRY(0x620), TBL_ENTRY(0x621), TBL_ENTRY(0x622), TBL_ENTRY(0x623), + TBL_ENTRY(0x624), TBL_ENTRY(0x625), TBL_ENTRY(0x626), TBL_ENTRY(0x627), + TBL_ENTRY(0x628), TBL_ENTRY(0x629), TBL_ENTRY(0x62a), TBL_ENTRY(0x62b), + TBL_ENTRY(0x62c), TBL_ENTRY(0x62d), TBL_ENTRY(0x62e), TBL_ENTRY(0x62f), + TBL_ENTRY(0x630), TBL_ENTRY(0x631), TBL_ENTRY(0x632), TBL_ENTRY(0x633), + TBL_ENTRY(0x634), TBL_ENTRY(0x635), TBL_ENTRY(0x636), TBL_ENTRY(0x637), + TBL_ENTRY(0x638), TBL_ENTRY(0x639), TBL_ENTRY(0x63a), TBL_ENTRY(0x63b), + TBL_ENTRY(0x63c), TBL_ENTRY(0x63d), TBL_ENTRY(0x63e), TBL_ENTRY(0x63f), + TBL_ENTRY(0x640), TBL_ENTRY(0x641), TBL_ENTRY(0x642), TBL_ENTRY(0x643), + TBL_ENTRY(0x644), TBL_ENTRY(0x645), TBL_ENTRY(0x646), TBL_ENTRY(0x647), + TBL_ENTRY(0x648), TBL_ENTRY(0x649), TBL_ENTRY(0x64a), TBL_ENTRY(0x64b), + TBL_ENTRY(0x64c), TBL_ENTRY(0x64d), TBL_ENTRY(0x64e), TBL_ENTRY(0x64f), + TBL_ENTRY(0x650), TBL_ENTRY(0x651), TBL_ENTRY(0x652), TBL_ENTRY(0x653), + TBL_ENTRY(0x654), TBL_ENTRY(0x655), TBL_ENTRY(0x656), TBL_ENTRY(0x657), + TBL_ENTRY(0x658), TBL_ENTRY(0x659), TBL_ENTRY(0x65a), TBL_ENTRY(0x65b), + TBL_ENTRY(0x65c), TBL_ENTRY(0x65d), TBL_ENTRY(0x65e), TBL_ENTRY(0x65f), + TBL_ENTRY(0x660), TBL_ENTRY(0x661), TBL_ENTRY(0x662), TBL_ENTRY(0x663), + TBL_ENTRY(0x664), TBL_ENTRY(0x665), TBL_ENTRY(0x666), TBL_ENTRY(0x667), + TBL_ENTRY(0x668), TBL_ENTRY(0x669), TBL_ENTRY(0x66a), TBL_ENTRY(0x66b), + TBL_ENTRY(0x66c), TBL_ENTRY(0x66d), TBL_ENTRY(0x66e), TBL_ENTRY(0x66f), + TBL_ENTRY(0x670), TBL_ENTRY(0x671), TBL_ENTRY(0x672), TBL_ENTRY(0x673), + TBL_ENTRY(0x674), TBL_ENTRY(0x675), TBL_ENTRY(0x676), TBL_ENTRY(0x677), + TBL_ENTRY(0x678), TBL_ENTRY(0x679), TBL_ENTRY(0x67a), TBL_ENTRY(0x67b), + TBL_ENTRY(0x67c), TBL_ENTRY(0x67d), TBL_ENTRY(0x67e), TBL_ENTRY(0x67f), + TBL_ENTRY(0x680), TBL_ENTRY(0x681), TBL_ENTRY(0x682), TBL_ENTRY(0x683), + TBL_ENTRY(0x684), TBL_ENTRY(0x685), TBL_ENTRY(0x686), TBL_ENTRY(0x687), + TBL_ENTRY(0x688), TBL_ENTRY(0x689), TBL_ENTRY(0x68a), TBL_ENTRY(0x68b), + TBL_ENTRY(0x68c), TBL_ENTRY(0x68d), TBL_ENTRY(0x68e), TBL_ENTRY(0x68f), + TBL_ENTRY(0x690), TBL_ENTRY(0x691), TBL_ENTRY(0x692), TBL_ENTRY(0x693), + TBL_ENTRY(0x694), TBL_ENTRY(0x695), TBL_ENTRY(0x696), TBL_ENTRY(0x697), + TBL_ENTRY(0x698), TBL_ENTRY(0x699), TBL_ENTRY(0x69a), TBL_ENTRY(0x69b), + TBL_ENTRY(0x69c), TBL_ENTRY(0x69d), TBL_ENTRY(0x69e), TBL_ENTRY(0x69f), + TBL_ENTRY(0x6a0), TBL_ENTRY(0x6a1), TBL_ENTRY(0x6a2), TBL_ENTRY(0x6a3), + TBL_ENTRY(0x6a4), TBL_ENTRY(0x6a5), TBL_ENTRY(0x6a6), TBL_ENTRY(0x6a7), + TBL_ENTRY(0x6a8), TBL_ENTRY(0x6a9), TBL_ENTRY(0x6aa), TBL_ENTRY(0x6ab), + TBL_ENTRY(0x6ac), TBL_ENTRY(0x6ad), TBL_ENTRY(0x6ae), TBL_ENTRY(0x6af), + TBL_ENTRY(0x6b0), TBL_ENTRY(0x6b1), TBL_ENTRY(0x6b2), TBL_ENTRY(0x6b3), + TBL_ENTRY(0x6b4), TBL_ENTRY(0x6b5), TBL_ENTRY(0x6b6), TBL_ENTRY(0x6b7), + TBL_ENTRY(0x6b8), TBL_ENTRY(0x6b9), TBL_ENTRY(0x6ba), TBL_ENTRY(0x6bb), + TBL_ENTRY(0x6bc), TBL_ENTRY(0x6bd), TBL_ENTRY(0x6be), TBL_ENTRY(0x6bf), + TBL_ENTRY(0x6c0), TBL_ENTRY(0x6c1), TBL_ENTRY(0x6c2), TBL_ENTRY(0x6c3), + TBL_ENTRY(0x6c4), TBL_ENTRY(0x6c5), TBL_ENTRY(0x6c6), TBL_ENTRY(0x6c7), + TBL_ENTRY(0x6c8), TBL_ENTRY(0x6c9), TBL_ENTRY(0x6ca), TBL_ENTRY(0x6cb), + TBL_ENTRY(0x6cc), TBL_ENTRY(0x6cd), TBL_ENTRY(0x6ce), TBL_ENTRY(0x6cf), + TBL_ENTRY(0x6d0), TBL_ENTRY(0x6d1), TBL_ENTRY(0x6d2), TBL_ENTRY(0x6d3), + TBL_ENTRY(0x6d4), TBL_ENTRY(0x6d5), TBL_ENTRY(0x6d6), TBL_ENTRY(0x6d7), + TBL_ENTRY(0x6d8), TBL_ENTRY(0x6d9), TBL_ENTRY(0x6da), TBL_ENTRY(0x6db), + TBL_ENTRY(0x6dc), TBL_ENTRY(0x6dd), TBL_ENTRY(0x6de), TBL_ENTRY(0x6df), + TBL_ENTRY(0x6e0), TBL_ENTRY(0x6e1), TBL_ENTRY(0x6e2), TBL_ENTRY(0x6e3), + TBL_ENTRY(0x6e4), TBL_ENTRY(0x6e5), TBL_ENTRY(0x6e6), TBL_ENTRY(0x6e7), + TBL_ENTRY(0x6e8), TBL_ENTRY(0x6e9), TBL_ENTRY(0x6ea), TBL_ENTRY(0x6eb), + TBL_ENTRY(0x6ec), TBL_ENTRY(0x6ed), TBL_ENTRY(0x6ee), TBL_ENTRY(0x6ef), + TBL_ENTRY(0x6f0), TBL_ENTRY(0x6f1), TBL_ENTRY(0x6f2), TBL_ENTRY(0x6f3), + TBL_ENTRY(0x6f4), TBL_ENTRY(0x6f5), TBL_ENTRY(0x6f6), TBL_ENTRY(0x6f7), + TBL_ENTRY(0x6f8), TBL_ENTRY(0x6f9), TBL_ENTRY(0x6fa), TBL_ENTRY(0x6fb), + TBL_ENTRY(0x6fc), TBL_ENTRY(0x6fd), TBL_ENTRY(0x6fe), TBL_ENTRY(0x6ff), + TBL_ENTRY(0x700), TBL_ENTRY(0x701), TBL_ENTRY(0x702), TBL_ENTRY(0x703), + TBL_ENTRY(0x704), TBL_ENTRY(0x705), TBL_ENTRY(0x706), TBL_ENTRY(0x707), + TBL_ENTRY(0x708), TBL_ENTRY(0x709), TBL_ENTRY(0x70a), TBL_ENTRY(0x70b), + TBL_ENTRY(0x70c), TBL_ENTRY(0x70d), TBL_ENTRY(0x70e), TBL_ENTRY(0x70f), + TBL_ENTRY(0x710), TBL_ENTRY(0x711), TBL_ENTRY(0x712), TBL_ENTRY(0x713), + TBL_ENTRY(0x714), TBL_ENTRY(0x715), TBL_ENTRY(0x716), TBL_ENTRY(0x717), + TBL_ENTRY(0x718), TBL_ENTRY(0x719), TBL_ENTRY(0x71a), TBL_ENTRY(0x71b), + TBL_ENTRY(0x71c), TBL_ENTRY(0x71d), TBL_ENTRY(0x71e), TBL_ENTRY(0x71f), + TBL_ENTRY(0x720), TBL_ENTRY(0x721), TBL_ENTRY(0x722), TBL_ENTRY(0x723), + TBL_ENTRY(0x724), TBL_ENTRY(0x725), TBL_ENTRY(0x726), TBL_ENTRY(0x727), + TBL_ENTRY(0x728), TBL_ENTRY(0x729), TBL_ENTRY(0x72a), TBL_ENTRY(0x72b), + TBL_ENTRY(0x72c), TBL_ENTRY(0x72d), TBL_ENTRY(0x72e), TBL_ENTRY(0x72f), + TBL_ENTRY(0x730), TBL_ENTRY(0x731), TBL_ENTRY(0x732), TBL_ENTRY(0x733), + TBL_ENTRY(0x734), TBL_ENTRY(0x735), TBL_ENTRY(0x736), TBL_ENTRY(0x737), + TBL_ENTRY(0x738), TBL_ENTRY(0x739), TBL_ENTRY(0x73a), TBL_ENTRY(0x73b), + TBL_ENTRY(0x73c), TBL_ENTRY(0x73d), TBL_ENTRY(0x73e), TBL_ENTRY(0x73f), + TBL_ENTRY(0x740), TBL_ENTRY(0x741), TBL_ENTRY(0x742), TBL_ENTRY(0x743), + TBL_ENTRY(0x744), TBL_ENTRY(0x745), TBL_ENTRY(0x746), TBL_ENTRY(0x747), + TBL_ENTRY(0x748), TBL_ENTRY(0x749), TBL_ENTRY(0x74a), TBL_ENTRY(0x74b), + TBL_ENTRY(0x74c), TBL_ENTRY(0x74d), TBL_ENTRY(0x74e), TBL_ENTRY(0x74f), + TBL_ENTRY(0x750), TBL_ENTRY(0x751), TBL_ENTRY(0x752), TBL_ENTRY(0x753), + TBL_ENTRY(0x754), TBL_ENTRY(0x755), TBL_ENTRY(0x756), TBL_ENTRY(0x757), + TBL_ENTRY(0x758), TBL_ENTRY(0x759), TBL_ENTRY(0x75a), TBL_ENTRY(0x75b), + TBL_ENTRY(0x75c), TBL_ENTRY(0x75d), TBL_ENTRY(0x75e), TBL_ENTRY(0x75f), + TBL_ENTRY(0x760), TBL_ENTRY(0x761), TBL_ENTRY(0x762), TBL_ENTRY(0x763), + TBL_ENTRY(0x764), TBL_ENTRY(0x765), TBL_ENTRY(0x766), TBL_ENTRY(0x767), + TBL_ENTRY(0x768), TBL_ENTRY(0x769), TBL_ENTRY(0x76a), TBL_ENTRY(0x76b), + TBL_ENTRY(0x76c), TBL_ENTRY(0x76d), TBL_ENTRY(0x76e), TBL_ENTRY(0x76f), + TBL_ENTRY(0x770), TBL_ENTRY(0x771), TBL_ENTRY(0x772), TBL_ENTRY(0x773), + TBL_ENTRY(0x774), TBL_ENTRY(0x775), TBL_ENTRY(0x776), TBL_ENTRY(0x777), + TBL_ENTRY(0x778), TBL_ENTRY(0x779), TBL_ENTRY(0x77a), TBL_ENTRY(0x77b), + TBL_ENTRY(0x77c), TBL_ENTRY(0x77d), TBL_ENTRY(0x77e), TBL_ENTRY(0x77f), + TBL_ENTRY(0x780), TBL_ENTRY(0x781), TBL_ENTRY(0x782), TBL_ENTRY(0x783), + TBL_ENTRY(0x784), TBL_ENTRY(0x785), TBL_ENTRY(0x786), TBL_ENTRY(0x787), + TBL_ENTRY(0x788), TBL_ENTRY(0x789), TBL_ENTRY(0x78a), TBL_ENTRY(0x78b), + TBL_ENTRY(0x78c), TBL_ENTRY(0x78d), TBL_ENTRY(0x78e), TBL_ENTRY(0x78f), + TBL_ENTRY(0x790), TBL_ENTRY(0x791), TBL_ENTRY(0x792), TBL_ENTRY(0x793), + TBL_ENTRY(0x794), TBL_ENTRY(0x795), TBL_ENTRY(0x796), TBL_ENTRY(0x797), + TBL_ENTRY(0x798), TBL_ENTRY(0x799), TBL_ENTRY(0x79a), TBL_ENTRY(0x79b), + TBL_ENTRY(0x79c), TBL_ENTRY(0x79d), TBL_ENTRY(0x79e), TBL_ENTRY(0x79f), + TBL_ENTRY(0x7a0), TBL_ENTRY(0x7a1), TBL_ENTRY(0x7a2), TBL_ENTRY(0x7a3), + TBL_ENTRY(0x7a4), TBL_ENTRY(0x7a5), TBL_ENTRY(0x7a6), TBL_ENTRY(0x7a7), + TBL_ENTRY(0x7a8), TBL_ENTRY(0x7a9), TBL_ENTRY(0x7aa), TBL_ENTRY(0x7ab), + TBL_ENTRY(0x7ac), TBL_ENTRY(0x7ad), TBL_ENTRY(0x7ae), TBL_ENTRY(0x7af), + TBL_ENTRY(0x7b0), TBL_ENTRY(0x7b1), TBL_ENTRY(0x7b2), TBL_ENTRY(0x7b3), + TBL_ENTRY(0x7b4), TBL_ENTRY(0x7b5), TBL_ENTRY(0x7b6), TBL_ENTRY(0x7b7), + TBL_ENTRY(0x7b8), TBL_ENTRY(0x7b9), TBL_ENTRY(0x7ba), TBL_ENTRY(0x7bb), + TBL_ENTRY(0x7bc), TBL_ENTRY(0x7bd), TBL_ENTRY(0x7be), TBL_ENTRY(0x7bf), + TBL_ENTRY(0x7c0), TBL_ENTRY(0x7c1), TBL_ENTRY(0x7c2), TBL_ENTRY(0x7c3), + TBL_ENTRY(0x7c4), TBL_ENTRY(0x7c5), TBL_ENTRY(0x7c6), TBL_ENTRY(0x7c7), + TBL_ENTRY(0x7c8), TBL_ENTRY(0x7c9), TBL_ENTRY(0x7ca), TBL_ENTRY(0x7cb), + TBL_ENTRY(0x7cc), TBL_ENTRY(0x7cd), TBL_ENTRY(0x7ce), TBL_ENTRY(0x7cf), + TBL_ENTRY(0x7d0), TBL_ENTRY(0x7d1), TBL_ENTRY(0x7d2), TBL_ENTRY(0x7d3), + TBL_ENTRY(0x7d4), TBL_ENTRY(0x7d5), TBL_ENTRY(0x7d6), TBL_ENTRY(0x7d7), + TBL_ENTRY(0x7d8), TBL_ENTRY(0x7d9), TBL_ENTRY(0x7da), TBL_ENTRY(0x7db), + TBL_ENTRY(0x7dc), TBL_ENTRY(0x7dd), TBL_ENTRY(0x7de), TBL_ENTRY(0x7df), + TBL_ENTRY(0x7e0), TBL_ENTRY(0x7e1), TBL_ENTRY(0x7e2), TBL_ENTRY(0x7e3), + TBL_ENTRY(0x7e4), TBL_ENTRY(0x7e5), TBL_ENTRY(0x7e6), TBL_ENTRY(0x7e7), + TBL_ENTRY(0x7e8), TBL_ENTRY(0x7e9), TBL_ENTRY(0x7ea), TBL_ENTRY(0x7eb), + TBL_ENTRY(0x7ec), TBL_ENTRY(0x7ed), TBL_ENTRY(0x7ee), TBL_ENTRY(0x7ef), + TBL_ENTRY(0x7f0), TBL_ENTRY(0x7f1), TBL_ENTRY(0x7f2), TBL_ENTRY(0x7f3), + TBL_ENTRY(0x7f4), TBL_ENTRY(0x7f5), TBL_ENTRY(0x7f6), TBL_ENTRY(0x7f7), + TBL_ENTRY(0x7f8), TBL_ENTRY(0x7f9), TBL_ENTRY(0x7fa), TBL_ENTRY(0x7fb), + TBL_ENTRY(0x7fc), TBL_ENTRY(0x7fd), TBL_ENTRY(0x7fe), TBL_ENTRY(0x7ff), + TBL_ENTRY(0x800), TBL_ENTRY(0x801), TBL_ENTRY(0x802), TBL_ENTRY(0x803), + TBL_ENTRY(0x804), TBL_ENTRY(0x805), TBL_ENTRY(0x806), TBL_ENTRY(0x807), + TBL_ENTRY(0x808), TBL_ENTRY(0x809), TBL_ENTRY(0x80a), TBL_ENTRY(0x80b), + TBL_ENTRY(0x80c), TBL_ENTRY(0x80d), TBL_ENTRY(0x80e), TBL_ENTRY(0x80f), + TBL_ENTRY(0x810), TBL_ENTRY(0x811), TBL_ENTRY(0x812), TBL_ENTRY(0x813), + TBL_ENTRY(0x814), TBL_ENTRY(0x815), TBL_ENTRY(0x816), TBL_ENTRY(0x817), + TBL_ENTRY(0x818), TBL_ENTRY(0x819), TBL_ENTRY(0x81a), TBL_ENTRY(0x81b), + TBL_ENTRY(0x81c), TBL_ENTRY(0x81d), TBL_ENTRY(0x81e), TBL_ENTRY(0x81f), + TBL_ENTRY(0x820), TBL_ENTRY(0x821), TBL_ENTRY(0x822), TBL_ENTRY(0x823), + TBL_ENTRY(0x824), TBL_ENTRY(0x825), TBL_ENTRY(0x826), TBL_ENTRY(0x827), + TBL_ENTRY(0x828), TBL_ENTRY(0x829), TBL_ENTRY(0x82a), TBL_ENTRY(0x82b), + TBL_ENTRY(0x82c), TBL_ENTRY(0x82d), TBL_ENTRY(0x82e), TBL_ENTRY(0x82f), + TBL_ENTRY(0x830), TBL_ENTRY(0x831), TBL_ENTRY(0x832), TBL_ENTRY(0x833), + TBL_ENTRY(0x834), TBL_ENTRY(0x835), TBL_ENTRY(0x836), TBL_ENTRY(0x837), + TBL_ENTRY(0x838), TBL_ENTRY(0x839), TBL_ENTRY(0x83a), TBL_ENTRY(0x83b), + TBL_ENTRY(0x83c), TBL_ENTRY(0x83d), TBL_ENTRY(0x83e), TBL_ENTRY(0x83f), + TBL_ENTRY(0x840), TBL_ENTRY(0x841), TBL_ENTRY(0x842), TBL_ENTRY(0x843), + TBL_ENTRY(0x844), TBL_ENTRY(0x845), TBL_ENTRY(0x846), TBL_ENTRY(0x847), + TBL_ENTRY(0x848), TBL_ENTRY(0x849), TBL_ENTRY(0x84a), TBL_ENTRY(0x84b), + TBL_ENTRY(0x84c), TBL_ENTRY(0x84d), TBL_ENTRY(0x84e), TBL_ENTRY(0x84f), + TBL_ENTRY(0x850), TBL_ENTRY(0x851), TBL_ENTRY(0x852), TBL_ENTRY(0x853), + TBL_ENTRY(0x854), TBL_ENTRY(0x855), TBL_ENTRY(0x856), TBL_ENTRY(0x857), + TBL_ENTRY(0x858), TBL_ENTRY(0x859), TBL_ENTRY(0x85a), TBL_ENTRY(0x85b), + TBL_ENTRY(0x85c), TBL_ENTRY(0x85d), TBL_ENTRY(0x85e), TBL_ENTRY(0x85f), + TBL_ENTRY(0x860), TBL_ENTRY(0x861), TBL_ENTRY(0x862), TBL_ENTRY(0x863), + TBL_ENTRY(0x864), TBL_ENTRY(0x865), TBL_ENTRY(0x866), TBL_ENTRY(0x867), + TBL_ENTRY(0x868), TBL_ENTRY(0x869), TBL_ENTRY(0x86a), TBL_ENTRY(0x86b), + TBL_ENTRY(0x86c), TBL_ENTRY(0x86d), TBL_ENTRY(0x86e), TBL_ENTRY(0x86f), + TBL_ENTRY(0x870), TBL_ENTRY(0x871), TBL_ENTRY(0x872), TBL_ENTRY(0x873), + TBL_ENTRY(0x874), TBL_ENTRY(0x875), TBL_ENTRY(0x876), TBL_ENTRY(0x877), + TBL_ENTRY(0x878), TBL_ENTRY(0x879), TBL_ENTRY(0x87a), TBL_ENTRY(0x87b), + TBL_ENTRY(0x87c), TBL_ENTRY(0x87d), TBL_ENTRY(0x87e), TBL_ENTRY(0x87f), + TBL_ENTRY(0x880), TBL_ENTRY(0x881), TBL_ENTRY(0x882), TBL_ENTRY(0x883), + TBL_ENTRY(0x884), TBL_ENTRY(0x885), TBL_ENTRY(0x886), TBL_ENTRY(0x887), + TBL_ENTRY(0x888), TBL_ENTRY(0x889), TBL_ENTRY(0x88a), TBL_ENTRY(0x88b), + TBL_ENTRY(0x88c), TBL_ENTRY(0x88d), TBL_ENTRY(0x88e), TBL_ENTRY(0x88f), + TBL_ENTRY(0x890), TBL_ENTRY(0x891), TBL_ENTRY(0x892), TBL_ENTRY(0x893), + TBL_ENTRY(0x894), TBL_ENTRY(0x895), TBL_ENTRY(0x896), TBL_ENTRY(0x897), + TBL_ENTRY(0x898), TBL_ENTRY(0x899), TBL_ENTRY(0x89a), TBL_ENTRY(0x89b), + TBL_ENTRY(0x89c), TBL_ENTRY(0x89d), TBL_ENTRY(0x89e), TBL_ENTRY(0x89f), + TBL_ENTRY(0x8a0), TBL_ENTRY(0x8a1), TBL_ENTRY(0x8a2), TBL_ENTRY(0x8a3), + TBL_ENTRY(0x8a4), TBL_ENTRY(0x8a5), TBL_ENTRY(0x8a6), TBL_ENTRY(0x8a7), + TBL_ENTRY(0x8a8), TBL_ENTRY(0x8a9), TBL_ENTRY(0x8aa), TBL_ENTRY(0x8ab), + TBL_ENTRY(0x8ac), TBL_ENTRY(0x8ad), TBL_ENTRY(0x8ae), TBL_ENTRY(0x8af), + TBL_ENTRY(0x8b0), TBL_ENTRY(0x8b1), TBL_ENTRY(0x8b2), TBL_ENTRY(0x8b3), + TBL_ENTRY(0x8b4), TBL_ENTRY(0x8b5), TBL_ENTRY(0x8b6), TBL_ENTRY(0x8b7), + TBL_ENTRY(0x8b8), TBL_ENTRY(0x8b9), TBL_ENTRY(0x8ba), TBL_ENTRY(0x8bb), + TBL_ENTRY(0x8bc), TBL_ENTRY(0x8bd), TBL_ENTRY(0x8be), TBL_ENTRY(0x8bf), + TBL_ENTRY(0x8c0), TBL_ENTRY(0x8c1), TBL_ENTRY(0x8c2), TBL_ENTRY(0x8c3), + TBL_ENTRY(0x8c4), TBL_ENTRY(0x8c5), TBL_ENTRY(0x8c6), TBL_ENTRY(0x8c7), + TBL_ENTRY(0x8c8), TBL_ENTRY(0x8c9), TBL_ENTRY(0x8ca), TBL_ENTRY(0x8cb), + TBL_ENTRY(0x8cc), TBL_ENTRY(0x8cd), TBL_ENTRY(0x8ce), TBL_ENTRY(0x8cf), + TBL_ENTRY(0x8d0), TBL_ENTRY(0x8d1), TBL_ENTRY(0x8d2), TBL_ENTRY(0x8d3), + TBL_ENTRY(0x8d4), TBL_ENTRY(0x8d5), TBL_ENTRY(0x8d6), TBL_ENTRY(0x8d7), + TBL_ENTRY(0x8d8), TBL_ENTRY(0x8d9), TBL_ENTRY(0x8da), TBL_ENTRY(0x8db), + TBL_ENTRY(0x8dc), TBL_ENTRY(0x8dd), TBL_ENTRY(0x8de), TBL_ENTRY(0x8df), + TBL_ENTRY(0x8e0), TBL_ENTRY(0x8e1), TBL_ENTRY(0x8e2), TBL_ENTRY(0x8e3), + TBL_ENTRY(0x8e4), TBL_ENTRY(0x8e5), TBL_ENTRY(0x8e6), TBL_ENTRY(0x8e7), + TBL_ENTRY(0x8e8), TBL_ENTRY(0x8e9), TBL_ENTRY(0x8ea), TBL_ENTRY(0x8eb), + TBL_ENTRY(0x8ec), TBL_ENTRY(0x8ed), TBL_ENTRY(0x8ee), TBL_ENTRY(0x8ef), + TBL_ENTRY(0x8f0), TBL_ENTRY(0x8f1), TBL_ENTRY(0x8f2), TBL_ENTRY(0x8f3), + TBL_ENTRY(0x8f4), TBL_ENTRY(0x8f5), TBL_ENTRY(0x8f6), TBL_ENTRY(0x8f7), + TBL_ENTRY(0x8f8), TBL_ENTRY(0x8f9), TBL_ENTRY(0x8fa), TBL_ENTRY(0x8fb), + TBL_ENTRY(0x8fc), TBL_ENTRY(0x8fd), TBL_ENTRY(0x8fe), TBL_ENTRY(0x8ff), + TBL_ENTRY(0x900), TBL_ENTRY(0x901), TBL_ENTRY(0x902), TBL_ENTRY(0x903), + TBL_ENTRY(0x904), TBL_ENTRY(0x905), TBL_ENTRY(0x906), TBL_ENTRY(0x907), + TBL_ENTRY(0x908), TBL_ENTRY(0x909), TBL_ENTRY(0x90a), TBL_ENTRY(0x90b), + TBL_ENTRY(0x90c), TBL_ENTRY(0x90d), TBL_ENTRY(0x90e), TBL_ENTRY(0x90f), + TBL_ENTRY(0x910), TBL_ENTRY(0x911), TBL_ENTRY(0x912), TBL_ENTRY(0x913), + TBL_ENTRY(0x914), TBL_ENTRY(0x915), TBL_ENTRY(0x916), TBL_ENTRY(0x917), + TBL_ENTRY(0x918), TBL_ENTRY(0x919), TBL_ENTRY(0x91a), TBL_ENTRY(0x91b), + TBL_ENTRY(0x91c), TBL_ENTRY(0x91d), TBL_ENTRY(0x91e), TBL_ENTRY(0x91f), + TBL_ENTRY(0x920), TBL_ENTRY(0x921), TBL_ENTRY(0x922), TBL_ENTRY(0x923), + TBL_ENTRY(0x924), TBL_ENTRY(0x925), TBL_ENTRY(0x926), TBL_ENTRY(0x927), + TBL_ENTRY(0x928), TBL_ENTRY(0x929), TBL_ENTRY(0x92a), TBL_ENTRY(0x92b), + TBL_ENTRY(0x92c), TBL_ENTRY(0x92d), TBL_ENTRY(0x92e), TBL_ENTRY(0x92f), + TBL_ENTRY(0x930), TBL_ENTRY(0x931), TBL_ENTRY(0x932), TBL_ENTRY(0x933), + TBL_ENTRY(0x934), TBL_ENTRY(0x935), TBL_ENTRY(0x936), TBL_ENTRY(0x937), + TBL_ENTRY(0x938), TBL_ENTRY(0x939), TBL_ENTRY(0x93a), TBL_ENTRY(0x93b), + TBL_ENTRY(0x93c), TBL_ENTRY(0x93d), TBL_ENTRY(0x93e), TBL_ENTRY(0x93f), + TBL_ENTRY(0x940), TBL_ENTRY(0x941), TBL_ENTRY(0x942), TBL_ENTRY(0x943), + TBL_ENTRY(0x944), TBL_ENTRY(0x945), TBL_ENTRY(0x946), TBL_ENTRY(0x947), + TBL_ENTRY(0x948), TBL_ENTRY(0x949), TBL_ENTRY(0x94a), TBL_ENTRY(0x94b), + TBL_ENTRY(0x94c), TBL_ENTRY(0x94d), TBL_ENTRY(0x94e), TBL_ENTRY(0x94f), + TBL_ENTRY(0x950), TBL_ENTRY(0x951), TBL_ENTRY(0x952), TBL_ENTRY(0x953), + TBL_ENTRY(0x954), TBL_ENTRY(0x955), TBL_ENTRY(0x956), TBL_ENTRY(0x957), + TBL_ENTRY(0x958), TBL_ENTRY(0x959), TBL_ENTRY(0x95a), TBL_ENTRY(0x95b), + TBL_ENTRY(0x95c), TBL_ENTRY(0x95d), TBL_ENTRY(0x95e), TBL_ENTRY(0x95f), + TBL_ENTRY(0x960), TBL_ENTRY(0x961), TBL_ENTRY(0x962), TBL_ENTRY(0x963), + TBL_ENTRY(0x964), TBL_ENTRY(0x965), TBL_ENTRY(0x966), TBL_ENTRY(0x967), + TBL_ENTRY(0x968), TBL_ENTRY(0x969), TBL_ENTRY(0x96a), TBL_ENTRY(0x96b), + TBL_ENTRY(0x96c), TBL_ENTRY(0x96d), TBL_ENTRY(0x96e), TBL_ENTRY(0x96f), + TBL_ENTRY(0x970), TBL_ENTRY(0x971), TBL_ENTRY(0x972), TBL_ENTRY(0x973), + TBL_ENTRY(0x974), TBL_ENTRY(0x975), TBL_ENTRY(0x976), TBL_ENTRY(0x977), + TBL_ENTRY(0x978), TBL_ENTRY(0x979), TBL_ENTRY(0x97a), TBL_ENTRY(0x97b), + TBL_ENTRY(0x97c), TBL_ENTRY(0x97d), TBL_ENTRY(0x97e), TBL_ENTRY(0x97f), + TBL_ENTRY(0x980), TBL_ENTRY(0x981), TBL_ENTRY(0x982), TBL_ENTRY(0x983), + TBL_ENTRY(0x984), TBL_ENTRY(0x985), TBL_ENTRY(0x986), TBL_ENTRY(0x987), + TBL_ENTRY(0x988), TBL_ENTRY(0x989), TBL_ENTRY(0x98a), TBL_ENTRY(0x98b), + TBL_ENTRY(0x98c), TBL_ENTRY(0x98d), TBL_ENTRY(0x98e), TBL_ENTRY(0x98f), + TBL_ENTRY(0x990), TBL_ENTRY(0x991), TBL_ENTRY(0x992), TBL_ENTRY(0x993), + TBL_ENTRY(0x994), TBL_ENTRY(0x995), TBL_ENTRY(0x996), TBL_ENTRY(0x997), + TBL_ENTRY(0x998), TBL_ENTRY(0x999), TBL_ENTRY(0x99a), TBL_ENTRY(0x99b), + TBL_ENTRY(0x99c), TBL_ENTRY(0x99d), TBL_ENTRY(0x99e), TBL_ENTRY(0x99f), + TBL_ENTRY(0x9a0), TBL_ENTRY(0x9a1), TBL_ENTRY(0x9a2), TBL_ENTRY(0x9a3), + TBL_ENTRY(0x9a4), TBL_ENTRY(0x9a5), TBL_ENTRY(0x9a6), TBL_ENTRY(0x9a7), + TBL_ENTRY(0x9a8), TBL_ENTRY(0x9a9), TBL_ENTRY(0x9aa), TBL_ENTRY(0x9ab), + TBL_ENTRY(0x9ac), TBL_ENTRY(0x9ad), TBL_ENTRY(0x9ae), TBL_ENTRY(0x9af), + TBL_ENTRY(0x9b0), TBL_ENTRY(0x9b1), TBL_ENTRY(0x9b2), TBL_ENTRY(0x9b3), + TBL_ENTRY(0x9b4), TBL_ENTRY(0x9b5), TBL_ENTRY(0x9b6), TBL_ENTRY(0x9b7), + TBL_ENTRY(0x9b8), TBL_ENTRY(0x9b9), TBL_ENTRY(0x9ba), TBL_ENTRY(0x9bb), + TBL_ENTRY(0x9bc), TBL_ENTRY(0x9bd), TBL_ENTRY(0x9be), TBL_ENTRY(0x9bf), + TBL_ENTRY(0x9c0), TBL_ENTRY(0x9c1), TBL_ENTRY(0x9c2), TBL_ENTRY(0x9c3), + TBL_ENTRY(0x9c4), TBL_ENTRY(0x9c5), TBL_ENTRY(0x9c6), TBL_ENTRY(0x9c7), + TBL_ENTRY(0x9c8), TBL_ENTRY(0x9c9), TBL_ENTRY(0x9ca), TBL_ENTRY(0x9cb), + TBL_ENTRY(0x9cc), TBL_ENTRY(0x9cd), TBL_ENTRY(0x9ce), TBL_ENTRY(0x9cf), + TBL_ENTRY(0x9d0), TBL_ENTRY(0x9d1), TBL_ENTRY(0x9d2), TBL_ENTRY(0x9d3), + TBL_ENTRY(0x9d4), TBL_ENTRY(0x9d5), TBL_ENTRY(0x9d6), TBL_ENTRY(0x9d7), + TBL_ENTRY(0x9d8), TBL_ENTRY(0x9d9), TBL_ENTRY(0x9da), TBL_ENTRY(0x9db), + TBL_ENTRY(0x9dc), TBL_ENTRY(0x9dd), TBL_ENTRY(0x9de), TBL_ENTRY(0x9df), + TBL_ENTRY(0x9e0), TBL_ENTRY(0x9e1), TBL_ENTRY(0x9e2), TBL_ENTRY(0x9e3), + TBL_ENTRY(0x9e4), TBL_ENTRY(0x9e5), TBL_ENTRY(0x9e6), TBL_ENTRY(0x9e7), + TBL_ENTRY(0x9e8), TBL_ENTRY(0x9e9), TBL_ENTRY(0x9ea), TBL_ENTRY(0x9eb), + TBL_ENTRY(0x9ec), TBL_ENTRY(0x9ed), TBL_ENTRY(0x9ee), TBL_ENTRY(0x9ef), + TBL_ENTRY(0x9f0), TBL_ENTRY(0x9f1), TBL_ENTRY(0x9f2), TBL_ENTRY(0x9f3), + TBL_ENTRY(0x9f4), TBL_ENTRY(0x9f5), TBL_ENTRY(0x9f6), TBL_ENTRY(0x9f7), + TBL_ENTRY(0x9f8), TBL_ENTRY(0x9f9), TBL_ENTRY(0x9fa), TBL_ENTRY(0x9fb), + TBL_ENTRY(0x9fc), TBL_ENTRY(0x9fd), TBL_ENTRY(0x9fe), TBL_ENTRY(0x9ff), + TBL_ENTRY(0xa00), TBL_ENTRY(0xa01), TBL_ENTRY(0xa02), TBL_ENTRY(0xa03), + TBL_ENTRY(0xa04), TBL_ENTRY(0xa05), TBL_ENTRY(0xa06), TBL_ENTRY(0xa07), + TBL_ENTRY(0xa08), TBL_ENTRY(0xa09), TBL_ENTRY(0xa0a), TBL_ENTRY(0xa0b), + TBL_ENTRY(0xa0c), TBL_ENTRY(0xa0d), TBL_ENTRY(0xa0e), TBL_ENTRY(0xa0f), + TBL_ENTRY(0xa10), TBL_ENTRY(0xa11), TBL_ENTRY(0xa12), TBL_ENTRY(0xa13), + TBL_ENTRY(0xa14), TBL_ENTRY(0xa15), TBL_ENTRY(0xa16), TBL_ENTRY(0xa17), + TBL_ENTRY(0xa18), TBL_ENTRY(0xa19), TBL_ENTRY(0xa1a), TBL_ENTRY(0xa1b), + TBL_ENTRY(0xa1c), TBL_ENTRY(0xa1d), TBL_ENTRY(0xa1e), TBL_ENTRY(0xa1f), + TBL_ENTRY(0xa20), TBL_ENTRY(0xa21), TBL_ENTRY(0xa22), TBL_ENTRY(0xa23), + TBL_ENTRY(0xa24), TBL_ENTRY(0xa25), TBL_ENTRY(0xa26), TBL_ENTRY(0xa27), + TBL_ENTRY(0xa28), TBL_ENTRY(0xa29), TBL_ENTRY(0xa2a), TBL_ENTRY(0xa2b), + TBL_ENTRY(0xa2c), TBL_ENTRY(0xa2d), TBL_ENTRY(0xa2e), TBL_ENTRY(0xa2f), + TBL_ENTRY(0xa30), TBL_ENTRY(0xa31), TBL_ENTRY(0xa32), TBL_ENTRY(0xa33), + TBL_ENTRY(0xa34), TBL_ENTRY(0xa35), TBL_ENTRY(0xa36), TBL_ENTRY(0xa37), + TBL_ENTRY(0xa38), TBL_ENTRY(0xa39), TBL_ENTRY(0xa3a), TBL_ENTRY(0xa3b), + TBL_ENTRY(0xa3c), TBL_ENTRY(0xa3d), TBL_ENTRY(0xa3e), TBL_ENTRY(0xa3f), + TBL_ENTRY(0xa40), TBL_ENTRY(0xa41), TBL_ENTRY(0xa42), TBL_ENTRY(0xa43), + TBL_ENTRY(0xa44), TBL_ENTRY(0xa45), TBL_ENTRY(0xa46), TBL_ENTRY(0xa47), + TBL_ENTRY(0xa48), TBL_ENTRY(0xa49), TBL_ENTRY(0xa4a), TBL_ENTRY(0xa4b), + TBL_ENTRY(0xa4c), TBL_ENTRY(0xa4d), TBL_ENTRY(0xa4e), TBL_ENTRY(0xa4f), + TBL_ENTRY(0xa50), TBL_ENTRY(0xa51), TBL_ENTRY(0xa52), TBL_ENTRY(0xa53), + TBL_ENTRY(0xa54), TBL_ENTRY(0xa55), TBL_ENTRY(0xa56), TBL_ENTRY(0xa57), + TBL_ENTRY(0xa58), TBL_ENTRY(0xa59), TBL_ENTRY(0xa5a), TBL_ENTRY(0xa5b), + TBL_ENTRY(0xa5c), TBL_ENTRY(0xa5d), TBL_ENTRY(0xa5e), TBL_ENTRY(0xa5f), + TBL_ENTRY(0xa60), TBL_ENTRY(0xa61), TBL_ENTRY(0xa62), TBL_ENTRY(0xa63), + TBL_ENTRY(0xa64), TBL_ENTRY(0xa65), TBL_ENTRY(0xa66), TBL_ENTRY(0xa67), + TBL_ENTRY(0xa68), TBL_ENTRY(0xa69), TBL_ENTRY(0xa6a), TBL_ENTRY(0xa6b), + TBL_ENTRY(0xa6c), TBL_ENTRY(0xa6d), TBL_ENTRY(0xa6e), TBL_ENTRY(0xa6f), + TBL_ENTRY(0xa70), TBL_ENTRY(0xa71), TBL_ENTRY(0xa72), TBL_ENTRY(0xa73), + TBL_ENTRY(0xa74), TBL_ENTRY(0xa75), TBL_ENTRY(0xa76), TBL_ENTRY(0xa77), + TBL_ENTRY(0xa78), TBL_ENTRY(0xa79), TBL_ENTRY(0xa7a), TBL_ENTRY(0xa7b), + TBL_ENTRY(0xa7c), TBL_ENTRY(0xa7d), TBL_ENTRY(0xa7e), TBL_ENTRY(0xa7f), + TBL_ENTRY(0xa80), TBL_ENTRY(0xa81), TBL_ENTRY(0xa82), TBL_ENTRY(0xa83), + TBL_ENTRY(0xa84), TBL_ENTRY(0xa85), TBL_ENTRY(0xa86), TBL_ENTRY(0xa87), + TBL_ENTRY(0xa88), TBL_ENTRY(0xa89), TBL_ENTRY(0xa8a), TBL_ENTRY(0xa8b), + TBL_ENTRY(0xa8c), TBL_ENTRY(0xa8d), TBL_ENTRY(0xa8e), TBL_ENTRY(0xa8f), + TBL_ENTRY(0xa90), TBL_ENTRY(0xa91), TBL_ENTRY(0xa92), TBL_ENTRY(0xa93), + TBL_ENTRY(0xa94), TBL_ENTRY(0xa95), TBL_ENTRY(0xa96), TBL_ENTRY(0xa97), + TBL_ENTRY(0xa98), TBL_ENTRY(0xa99), TBL_ENTRY(0xa9a), TBL_ENTRY(0xa9b), + TBL_ENTRY(0xa9c), TBL_ENTRY(0xa9d), TBL_ENTRY(0xa9e), TBL_ENTRY(0xa9f), + TBL_ENTRY(0xaa0), TBL_ENTRY(0xaa1), TBL_ENTRY(0xaa2), TBL_ENTRY(0xaa3), + TBL_ENTRY(0xaa4), TBL_ENTRY(0xaa5), TBL_ENTRY(0xaa6), TBL_ENTRY(0xaa7), + TBL_ENTRY(0xaa8), TBL_ENTRY(0xaa9), TBL_ENTRY(0xaaa), TBL_ENTRY(0xaab), + TBL_ENTRY(0xaac), TBL_ENTRY(0xaad), TBL_ENTRY(0xaae), TBL_ENTRY(0xaaf), + TBL_ENTRY(0xab0), TBL_ENTRY(0xab1), TBL_ENTRY(0xab2), TBL_ENTRY(0xab3), + TBL_ENTRY(0xab4), TBL_ENTRY(0xab5), TBL_ENTRY(0xab6), TBL_ENTRY(0xab7), + TBL_ENTRY(0xab8), TBL_ENTRY(0xab9), TBL_ENTRY(0xaba), TBL_ENTRY(0xabb), + TBL_ENTRY(0xabc), TBL_ENTRY(0xabd), TBL_ENTRY(0xabe), TBL_ENTRY(0xabf), + TBL_ENTRY(0xac0), TBL_ENTRY(0xac1), TBL_ENTRY(0xac2), TBL_ENTRY(0xac3), + TBL_ENTRY(0xac4), TBL_ENTRY(0xac5), TBL_ENTRY(0xac6), TBL_ENTRY(0xac7), + TBL_ENTRY(0xac8), TBL_ENTRY(0xac9), TBL_ENTRY(0xaca), TBL_ENTRY(0xacb), + TBL_ENTRY(0xacc), TBL_ENTRY(0xacd), TBL_ENTRY(0xace), TBL_ENTRY(0xacf), + TBL_ENTRY(0xad0), TBL_ENTRY(0xad1), TBL_ENTRY(0xad2), TBL_ENTRY(0xad3), + TBL_ENTRY(0xad4), TBL_ENTRY(0xad5), TBL_ENTRY(0xad6), TBL_ENTRY(0xad7), + TBL_ENTRY(0xad8), TBL_ENTRY(0xad9), TBL_ENTRY(0xada), TBL_ENTRY(0xadb), + TBL_ENTRY(0xadc), TBL_ENTRY(0xadd), TBL_ENTRY(0xade), TBL_ENTRY(0xadf), + TBL_ENTRY(0xae0), TBL_ENTRY(0xae1), TBL_ENTRY(0xae2), TBL_ENTRY(0xae3), + TBL_ENTRY(0xae4), TBL_ENTRY(0xae5), TBL_ENTRY(0xae6), TBL_ENTRY(0xae7), + TBL_ENTRY(0xae8), TBL_ENTRY(0xae9), TBL_ENTRY(0xaea), TBL_ENTRY(0xaeb), + TBL_ENTRY(0xaec), TBL_ENTRY(0xaed), TBL_ENTRY(0xaee), TBL_ENTRY(0xaef), + TBL_ENTRY(0xaf0), TBL_ENTRY(0xaf1), TBL_ENTRY(0xaf2), TBL_ENTRY(0xaf3), + TBL_ENTRY(0xaf4), TBL_ENTRY(0xaf5), TBL_ENTRY(0xaf6), TBL_ENTRY(0xaf7), + TBL_ENTRY(0xaf8), TBL_ENTRY(0xaf9), TBL_ENTRY(0xafa), TBL_ENTRY(0xafb), + TBL_ENTRY(0xafc), TBL_ENTRY(0xafd), TBL_ENTRY(0xafe), TBL_ENTRY(0xaff), + TBL_ENTRY(0xb00), TBL_ENTRY(0xb01), TBL_ENTRY(0xb02), TBL_ENTRY(0xb03), + TBL_ENTRY(0xb04), TBL_ENTRY(0xb05), TBL_ENTRY(0xb06), TBL_ENTRY(0xb07), + TBL_ENTRY(0xb08), TBL_ENTRY(0xb09), TBL_ENTRY(0xb0a), TBL_ENTRY(0xb0b), + TBL_ENTRY(0xb0c), TBL_ENTRY(0xb0d), TBL_ENTRY(0xb0e), TBL_ENTRY(0xb0f), + TBL_ENTRY(0xb10), TBL_ENTRY(0xb11), TBL_ENTRY(0xb12), TBL_ENTRY(0xb13), + TBL_ENTRY(0xb14), TBL_ENTRY(0xb15), TBL_ENTRY(0xb16), TBL_ENTRY(0xb17), + TBL_ENTRY(0xb18), TBL_ENTRY(0xb19), TBL_ENTRY(0xb1a), TBL_ENTRY(0xb1b), + TBL_ENTRY(0xb1c), TBL_ENTRY(0xb1d), TBL_ENTRY(0xb1e), TBL_ENTRY(0xb1f), + TBL_ENTRY(0xb20), TBL_ENTRY(0xb21), TBL_ENTRY(0xb22), TBL_ENTRY(0xb23), + TBL_ENTRY(0xb24), TBL_ENTRY(0xb25), TBL_ENTRY(0xb26), TBL_ENTRY(0xb27), + TBL_ENTRY(0xb28), TBL_ENTRY(0xb29), TBL_ENTRY(0xb2a), TBL_ENTRY(0xb2b), + TBL_ENTRY(0xb2c), TBL_ENTRY(0xb2d), TBL_ENTRY(0xb2e), TBL_ENTRY(0xb2f), + TBL_ENTRY(0xb30), TBL_ENTRY(0xb31), TBL_ENTRY(0xb32), TBL_ENTRY(0xb33), + TBL_ENTRY(0xb34), TBL_ENTRY(0xb35), TBL_ENTRY(0xb36), TBL_ENTRY(0xb37), + TBL_ENTRY(0xb38), TBL_ENTRY(0xb39), TBL_ENTRY(0xb3a), TBL_ENTRY(0xb3b), + TBL_ENTRY(0xb3c), TBL_ENTRY(0xb3d), TBL_ENTRY(0xb3e), TBL_ENTRY(0xb3f), + TBL_ENTRY(0xb40), TBL_ENTRY(0xb41), TBL_ENTRY(0xb42), TBL_ENTRY(0xb43), + TBL_ENTRY(0xb44), TBL_ENTRY(0xb45), TBL_ENTRY(0xb46), TBL_ENTRY(0xb47), + TBL_ENTRY(0xb48), TBL_ENTRY(0xb49), TBL_ENTRY(0xb4a), TBL_ENTRY(0xb4b), + TBL_ENTRY(0xb4c), TBL_ENTRY(0xb4d), TBL_ENTRY(0xb4e), TBL_ENTRY(0xb4f), + TBL_ENTRY(0xb50), TBL_ENTRY(0xb51), TBL_ENTRY(0xb52), TBL_ENTRY(0xb53), + TBL_ENTRY(0xb54), TBL_ENTRY(0xb55), TBL_ENTRY(0xb56), TBL_ENTRY(0xb57), + TBL_ENTRY(0xb58), TBL_ENTRY(0xb59), TBL_ENTRY(0xb5a), TBL_ENTRY(0xb5b), + TBL_ENTRY(0xb5c), TBL_ENTRY(0xb5d), TBL_ENTRY(0xb5e), TBL_ENTRY(0xb5f), + TBL_ENTRY(0xb60), TBL_ENTRY(0xb61), TBL_ENTRY(0xb62), TBL_ENTRY(0xb63), + TBL_ENTRY(0xb64), TBL_ENTRY(0xb65), TBL_ENTRY(0xb66), TBL_ENTRY(0xb67), + TBL_ENTRY(0xb68), TBL_ENTRY(0xb69), TBL_ENTRY(0xb6a), TBL_ENTRY(0xb6b), + TBL_ENTRY(0xb6c), TBL_ENTRY(0xb6d), TBL_ENTRY(0xb6e), TBL_ENTRY(0xb6f), + TBL_ENTRY(0xb70), TBL_ENTRY(0xb71), TBL_ENTRY(0xb72), TBL_ENTRY(0xb73), + TBL_ENTRY(0xb74), TBL_ENTRY(0xb75), TBL_ENTRY(0xb76), TBL_ENTRY(0xb77), + TBL_ENTRY(0xb78), TBL_ENTRY(0xb79), TBL_ENTRY(0xb7a), TBL_ENTRY(0xb7b), + TBL_ENTRY(0xb7c), TBL_ENTRY(0xb7d), TBL_ENTRY(0xb7e), TBL_ENTRY(0xb7f), + TBL_ENTRY(0xb80), TBL_ENTRY(0xb81), TBL_ENTRY(0xb82), TBL_ENTRY(0xb83), + TBL_ENTRY(0xb84), TBL_ENTRY(0xb85), TBL_ENTRY(0xb86), TBL_ENTRY(0xb87), + TBL_ENTRY(0xb88), TBL_ENTRY(0xb89), TBL_ENTRY(0xb8a), TBL_ENTRY(0xb8b), + TBL_ENTRY(0xb8c), TBL_ENTRY(0xb8d), TBL_ENTRY(0xb8e), TBL_ENTRY(0xb8f), + TBL_ENTRY(0xb90), TBL_ENTRY(0xb91), TBL_ENTRY(0xb92), TBL_ENTRY(0xb93), + TBL_ENTRY(0xb94), TBL_ENTRY(0xb95), TBL_ENTRY(0xb96), TBL_ENTRY(0xb97), + TBL_ENTRY(0xb98), TBL_ENTRY(0xb99), TBL_ENTRY(0xb9a), TBL_ENTRY(0xb9b), + TBL_ENTRY(0xb9c), TBL_ENTRY(0xb9d), TBL_ENTRY(0xb9e), TBL_ENTRY(0xb9f), + TBL_ENTRY(0xba0), TBL_ENTRY(0xba1), TBL_ENTRY(0xba2), TBL_ENTRY(0xba3), + TBL_ENTRY(0xba4), TBL_ENTRY(0xba5), TBL_ENTRY(0xba6), TBL_ENTRY(0xba7), + TBL_ENTRY(0xba8), TBL_ENTRY(0xba9), TBL_ENTRY(0xbaa), TBL_ENTRY(0xbab), + TBL_ENTRY(0xbac), TBL_ENTRY(0xbad), TBL_ENTRY(0xbae), TBL_ENTRY(0xbaf), + TBL_ENTRY(0xbb0), TBL_ENTRY(0xbb1), TBL_ENTRY(0xbb2), TBL_ENTRY(0xbb3), + TBL_ENTRY(0xbb4), TBL_ENTRY(0xbb5), TBL_ENTRY(0xbb6), TBL_ENTRY(0xbb7), + TBL_ENTRY(0xbb8), TBL_ENTRY(0xbb9), TBL_ENTRY(0xbba), TBL_ENTRY(0xbbb), + TBL_ENTRY(0xbbc), TBL_ENTRY(0xbbd), TBL_ENTRY(0xbbe), TBL_ENTRY(0xbbf), + TBL_ENTRY(0xbc0), TBL_ENTRY(0xbc1), TBL_ENTRY(0xbc2), TBL_ENTRY(0xbc3), + TBL_ENTRY(0xbc4), TBL_ENTRY(0xbc5), TBL_ENTRY(0xbc6), TBL_ENTRY(0xbc7), + TBL_ENTRY(0xbc8), TBL_ENTRY(0xbc9), TBL_ENTRY(0xbca), TBL_ENTRY(0xbcb), + TBL_ENTRY(0xbcc), TBL_ENTRY(0xbcd), TBL_ENTRY(0xbce), TBL_ENTRY(0xbcf), + TBL_ENTRY(0xbd0), TBL_ENTRY(0xbd1), TBL_ENTRY(0xbd2), TBL_ENTRY(0xbd3), + TBL_ENTRY(0xbd4), TBL_ENTRY(0xbd5), TBL_ENTRY(0xbd6), TBL_ENTRY(0xbd7), + TBL_ENTRY(0xbd8), TBL_ENTRY(0xbd9), TBL_ENTRY(0xbda), TBL_ENTRY(0xbdb), + TBL_ENTRY(0xbdc), TBL_ENTRY(0xbdd), TBL_ENTRY(0xbde), TBL_ENTRY(0xbdf), + TBL_ENTRY(0xbe0), TBL_ENTRY(0xbe1), TBL_ENTRY(0xbe2), TBL_ENTRY(0xbe3), + TBL_ENTRY(0xbe4), TBL_ENTRY(0xbe5), TBL_ENTRY(0xbe6), TBL_ENTRY(0xbe7), + TBL_ENTRY(0xbe8), TBL_ENTRY(0xbe9), TBL_ENTRY(0xbea), TBL_ENTRY(0xbeb), + TBL_ENTRY(0xbec), TBL_ENTRY(0xbed), TBL_ENTRY(0xbee), TBL_ENTRY(0xbef), + TBL_ENTRY(0xbf0), TBL_ENTRY(0xbf1), TBL_ENTRY(0xbf2), TBL_ENTRY(0xbf3), + TBL_ENTRY(0xbf4), TBL_ENTRY(0xbf5), TBL_ENTRY(0xbf6), TBL_ENTRY(0xbf7), + TBL_ENTRY(0xbf8), TBL_ENTRY(0xbf9), TBL_ENTRY(0xbfa), TBL_ENTRY(0xbfb), + TBL_ENTRY(0xbfc), TBL_ENTRY(0xbfd), TBL_ENTRY(0xbfe), TBL_ENTRY(0xbff), + TBL_ENTRY(0xc00), TBL_ENTRY(0xc01), TBL_ENTRY(0xc02), TBL_ENTRY(0xc03), + TBL_ENTRY(0xc04), TBL_ENTRY(0xc05), TBL_ENTRY(0xc06), TBL_ENTRY(0xc07), + TBL_ENTRY(0xc08), TBL_ENTRY(0xc09), TBL_ENTRY(0xc0a), TBL_ENTRY(0xc0b), + TBL_ENTRY(0xc0c), TBL_ENTRY(0xc0d), TBL_ENTRY(0xc0e), TBL_ENTRY(0xc0f), + TBL_ENTRY(0xc10), TBL_ENTRY(0xc11), TBL_ENTRY(0xc12), TBL_ENTRY(0xc13), + TBL_ENTRY(0xc14), TBL_ENTRY(0xc15), TBL_ENTRY(0xc16), TBL_ENTRY(0xc17), + TBL_ENTRY(0xc18), TBL_ENTRY(0xc19), TBL_ENTRY(0xc1a), TBL_ENTRY(0xc1b), + TBL_ENTRY(0xc1c), TBL_ENTRY(0xc1d), TBL_ENTRY(0xc1e), TBL_ENTRY(0xc1f), + TBL_ENTRY(0xc20), TBL_ENTRY(0xc21), TBL_ENTRY(0xc22), TBL_ENTRY(0xc23), + TBL_ENTRY(0xc24), TBL_ENTRY(0xc25), TBL_ENTRY(0xc26), TBL_ENTRY(0xc27), + TBL_ENTRY(0xc28), TBL_ENTRY(0xc29), TBL_ENTRY(0xc2a), TBL_ENTRY(0xc2b), + TBL_ENTRY(0xc2c), TBL_ENTRY(0xc2d), TBL_ENTRY(0xc2e), TBL_ENTRY(0xc2f), + TBL_ENTRY(0xc30), TBL_ENTRY(0xc31), TBL_ENTRY(0xc32), TBL_ENTRY(0xc33), + TBL_ENTRY(0xc34), TBL_ENTRY(0xc35), TBL_ENTRY(0xc36), TBL_ENTRY(0xc37), + TBL_ENTRY(0xc38), TBL_ENTRY(0xc39), TBL_ENTRY(0xc3a), TBL_ENTRY(0xc3b), + TBL_ENTRY(0xc3c), TBL_ENTRY(0xc3d), TBL_ENTRY(0xc3e), TBL_ENTRY(0xc3f), + TBL_ENTRY(0xc40), TBL_ENTRY(0xc41), TBL_ENTRY(0xc42), TBL_ENTRY(0xc43), + TBL_ENTRY(0xc44), TBL_ENTRY(0xc45), TBL_ENTRY(0xc46), TBL_ENTRY(0xc47), + TBL_ENTRY(0xc48), TBL_ENTRY(0xc49), TBL_ENTRY(0xc4a), TBL_ENTRY(0xc4b), + TBL_ENTRY(0xc4c), TBL_ENTRY(0xc4d), TBL_ENTRY(0xc4e), TBL_ENTRY(0xc4f), + TBL_ENTRY(0xc50), TBL_ENTRY(0xc51), TBL_ENTRY(0xc52), TBL_ENTRY(0xc53), + TBL_ENTRY(0xc54), TBL_ENTRY(0xc55), TBL_ENTRY(0xc56), TBL_ENTRY(0xc57), + TBL_ENTRY(0xc58), TBL_ENTRY(0xc59), TBL_ENTRY(0xc5a), TBL_ENTRY(0xc5b), + TBL_ENTRY(0xc5c), TBL_ENTRY(0xc5d), TBL_ENTRY(0xc5e), TBL_ENTRY(0xc5f), + TBL_ENTRY(0xc60), TBL_ENTRY(0xc61), TBL_ENTRY(0xc62), TBL_ENTRY(0xc63), + TBL_ENTRY(0xc64), TBL_ENTRY(0xc65), TBL_ENTRY(0xc66), TBL_ENTRY(0xc67), + TBL_ENTRY(0xc68), TBL_ENTRY(0xc69), TBL_ENTRY(0xc6a), TBL_ENTRY(0xc6b), + TBL_ENTRY(0xc6c), TBL_ENTRY(0xc6d), TBL_ENTRY(0xc6e), TBL_ENTRY(0xc6f), + TBL_ENTRY(0xc70), TBL_ENTRY(0xc71), TBL_ENTRY(0xc72), TBL_ENTRY(0xc73), + TBL_ENTRY(0xc74), TBL_ENTRY(0xc75), TBL_ENTRY(0xc76), TBL_ENTRY(0xc77), + TBL_ENTRY(0xc78), TBL_ENTRY(0xc79), TBL_ENTRY(0xc7a), TBL_ENTRY(0xc7b), + TBL_ENTRY(0xc7c), TBL_ENTRY(0xc7d), TBL_ENTRY(0xc7e), TBL_ENTRY(0xc7f), + TBL_ENTRY(0xc80), TBL_ENTRY(0xc81), TBL_ENTRY(0xc82), TBL_ENTRY(0xc83), + TBL_ENTRY(0xc84), TBL_ENTRY(0xc85), TBL_ENTRY(0xc86), TBL_ENTRY(0xc87), + TBL_ENTRY(0xc88), TBL_ENTRY(0xc89), TBL_ENTRY(0xc8a), TBL_ENTRY(0xc8b), + TBL_ENTRY(0xc8c), TBL_ENTRY(0xc8d), TBL_ENTRY(0xc8e), TBL_ENTRY(0xc8f), + TBL_ENTRY(0xc90), TBL_ENTRY(0xc91), TBL_ENTRY(0xc92), TBL_ENTRY(0xc93), + TBL_ENTRY(0xc94), TBL_ENTRY(0xc95), TBL_ENTRY(0xc96), TBL_ENTRY(0xc97), + TBL_ENTRY(0xc98), TBL_ENTRY(0xc99), TBL_ENTRY(0xc9a), TBL_ENTRY(0xc9b), + TBL_ENTRY(0xc9c), TBL_ENTRY(0xc9d), TBL_ENTRY(0xc9e), TBL_ENTRY(0xc9f), + TBL_ENTRY(0xca0), TBL_ENTRY(0xca1), TBL_ENTRY(0xca2), TBL_ENTRY(0xca3), + TBL_ENTRY(0xca4), TBL_ENTRY(0xca5), TBL_ENTRY(0xca6), TBL_ENTRY(0xca7), + TBL_ENTRY(0xca8), TBL_ENTRY(0xca9), TBL_ENTRY(0xcaa), TBL_ENTRY(0xcab), + TBL_ENTRY(0xcac), TBL_ENTRY(0xcad), TBL_ENTRY(0xcae), TBL_ENTRY(0xcaf), + TBL_ENTRY(0xcb0), TBL_ENTRY(0xcb1), TBL_ENTRY(0xcb2), TBL_ENTRY(0xcb3), + TBL_ENTRY(0xcb4), TBL_ENTRY(0xcb5), TBL_ENTRY(0xcb6), TBL_ENTRY(0xcb7), + TBL_ENTRY(0xcb8), TBL_ENTRY(0xcb9), TBL_ENTRY(0xcba), TBL_ENTRY(0xcbb), + TBL_ENTRY(0xcbc), TBL_ENTRY(0xcbd), TBL_ENTRY(0xcbe), TBL_ENTRY(0xcbf), + TBL_ENTRY(0xcc0), TBL_ENTRY(0xcc1), TBL_ENTRY(0xcc2), TBL_ENTRY(0xcc3), + TBL_ENTRY(0xcc4), TBL_ENTRY(0xcc5), TBL_ENTRY(0xcc6), TBL_ENTRY(0xcc7), + TBL_ENTRY(0xcc8), TBL_ENTRY(0xcc9), TBL_ENTRY(0xcca), TBL_ENTRY(0xccb), + TBL_ENTRY(0xccc), TBL_ENTRY(0xccd), TBL_ENTRY(0xcce), TBL_ENTRY(0xccf), + TBL_ENTRY(0xcd0), TBL_ENTRY(0xcd1), TBL_ENTRY(0xcd2), TBL_ENTRY(0xcd3), + TBL_ENTRY(0xcd4), TBL_ENTRY(0xcd5), TBL_ENTRY(0xcd6), TBL_ENTRY(0xcd7), + TBL_ENTRY(0xcd8), TBL_ENTRY(0xcd9), TBL_ENTRY(0xcda), TBL_ENTRY(0xcdb), + TBL_ENTRY(0xcdc), TBL_ENTRY(0xcdd), TBL_ENTRY(0xcde), TBL_ENTRY(0xcdf), + TBL_ENTRY(0xce0), TBL_ENTRY(0xce1), TBL_ENTRY(0xce2), TBL_ENTRY(0xce3), + TBL_ENTRY(0xce4), TBL_ENTRY(0xce5), TBL_ENTRY(0xce6), TBL_ENTRY(0xce7), + TBL_ENTRY(0xce8), TBL_ENTRY(0xce9), TBL_ENTRY(0xcea), TBL_ENTRY(0xceb), + TBL_ENTRY(0xcec), TBL_ENTRY(0xced), TBL_ENTRY(0xcee), TBL_ENTRY(0xcef), + TBL_ENTRY(0xcf0), TBL_ENTRY(0xcf1), TBL_ENTRY(0xcf2), TBL_ENTRY(0xcf3), + TBL_ENTRY(0xcf4), TBL_ENTRY(0xcf5), TBL_ENTRY(0xcf6), TBL_ENTRY(0xcf7), + TBL_ENTRY(0xcf8), TBL_ENTRY(0xcf9), TBL_ENTRY(0xcfa), TBL_ENTRY(0xcfb), + TBL_ENTRY(0xcfc), TBL_ENTRY(0xcfd), TBL_ENTRY(0xcfe), TBL_ENTRY(0xcff), + TBL_ENTRY(0xd00), TBL_ENTRY(0xd01), TBL_ENTRY(0xd02), TBL_ENTRY(0xd03), + TBL_ENTRY(0xd04), TBL_ENTRY(0xd05), TBL_ENTRY(0xd06), TBL_ENTRY(0xd07), + TBL_ENTRY(0xd08), TBL_ENTRY(0xd09), TBL_ENTRY(0xd0a), TBL_ENTRY(0xd0b), + TBL_ENTRY(0xd0c), TBL_ENTRY(0xd0d), TBL_ENTRY(0xd0e), TBL_ENTRY(0xd0f), + TBL_ENTRY(0xd10), TBL_ENTRY(0xd11), TBL_ENTRY(0xd12), TBL_ENTRY(0xd13), + TBL_ENTRY(0xd14), TBL_ENTRY(0xd15), TBL_ENTRY(0xd16), TBL_ENTRY(0xd17), + TBL_ENTRY(0xd18), TBL_ENTRY(0xd19), TBL_ENTRY(0xd1a), TBL_ENTRY(0xd1b), + TBL_ENTRY(0xd1c), TBL_ENTRY(0xd1d), TBL_ENTRY(0xd1e), TBL_ENTRY(0xd1f), + TBL_ENTRY(0xd20), TBL_ENTRY(0xd21), TBL_ENTRY(0xd22), TBL_ENTRY(0xd23), + TBL_ENTRY(0xd24), TBL_ENTRY(0xd25), TBL_ENTRY(0xd26), TBL_ENTRY(0xd27), + TBL_ENTRY(0xd28), TBL_ENTRY(0xd29), TBL_ENTRY(0xd2a), TBL_ENTRY(0xd2b), + TBL_ENTRY(0xd2c), TBL_ENTRY(0xd2d), TBL_ENTRY(0xd2e), TBL_ENTRY(0xd2f), + TBL_ENTRY(0xd30), TBL_ENTRY(0xd31), TBL_ENTRY(0xd32), TBL_ENTRY(0xd33), + TBL_ENTRY(0xd34), TBL_ENTRY(0xd35), TBL_ENTRY(0xd36), TBL_ENTRY(0xd37), + TBL_ENTRY(0xd38), TBL_ENTRY(0xd39), TBL_ENTRY(0xd3a), TBL_ENTRY(0xd3b), + TBL_ENTRY(0xd3c), TBL_ENTRY(0xd3d), TBL_ENTRY(0xd3e), TBL_ENTRY(0xd3f), + TBL_ENTRY(0xd40), TBL_ENTRY(0xd41), TBL_ENTRY(0xd42), TBL_ENTRY(0xd43), + TBL_ENTRY(0xd44), TBL_ENTRY(0xd45), TBL_ENTRY(0xd46), TBL_ENTRY(0xd47), + TBL_ENTRY(0xd48), TBL_ENTRY(0xd49), TBL_ENTRY(0xd4a), TBL_ENTRY(0xd4b), + TBL_ENTRY(0xd4c), TBL_ENTRY(0xd4d), TBL_ENTRY(0xd4e), TBL_ENTRY(0xd4f), + TBL_ENTRY(0xd50), TBL_ENTRY(0xd51), TBL_ENTRY(0xd52), TBL_ENTRY(0xd53), + TBL_ENTRY(0xd54), TBL_ENTRY(0xd55), TBL_ENTRY(0xd56), TBL_ENTRY(0xd57), + TBL_ENTRY(0xd58), TBL_ENTRY(0xd59), TBL_ENTRY(0xd5a), TBL_ENTRY(0xd5b), + TBL_ENTRY(0xd5c), TBL_ENTRY(0xd5d), TBL_ENTRY(0xd5e), TBL_ENTRY(0xd5f), + TBL_ENTRY(0xd60), TBL_ENTRY(0xd61), TBL_ENTRY(0xd62), TBL_ENTRY(0xd63), + TBL_ENTRY(0xd64), TBL_ENTRY(0xd65), TBL_ENTRY(0xd66), TBL_ENTRY(0xd67), + TBL_ENTRY(0xd68), TBL_ENTRY(0xd69), TBL_ENTRY(0xd6a), TBL_ENTRY(0xd6b), + TBL_ENTRY(0xd6c), TBL_ENTRY(0xd6d), TBL_ENTRY(0xd6e), TBL_ENTRY(0xd6f), + TBL_ENTRY(0xd70), TBL_ENTRY(0xd71), TBL_ENTRY(0xd72), TBL_ENTRY(0xd73), + TBL_ENTRY(0xd74), TBL_ENTRY(0xd75), TBL_ENTRY(0xd76), TBL_ENTRY(0xd77), + TBL_ENTRY(0xd78), TBL_ENTRY(0xd79), TBL_ENTRY(0xd7a), TBL_ENTRY(0xd7b), + TBL_ENTRY(0xd7c), TBL_ENTRY(0xd7d), TBL_ENTRY(0xd7e), TBL_ENTRY(0xd7f), + TBL_ENTRY(0xd80), TBL_ENTRY(0xd81), TBL_ENTRY(0xd82), TBL_ENTRY(0xd83), + TBL_ENTRY(0xd84), TBL_ENTRY(0xd85), TBL_ENTRY(0xd86), TBL_ENTRY(0xd87), + TBL_ENTRY(0xd88), TBL_ENTRY(0xd89), TBL_ENTRY(0xd8a), TBL_ENTRY(0xd8b), + TBL_ENTRY(0xd8c), TBL_ENTRY(0xd8d), TBL_ENTRY(0xd8e), TBL_ENTRY(0xd8f), + TBL_ENTRY(0xd90), TBL_ENTRY(0xd91), TBL_ENTRY(0xd92), TBL_ENTRY(0xd93), + TBL_ENTRY(0xd94), TBL_ENTRY(0xd95), TBL_ENTRY(0xd96), TBL_ENTRY(0xd97), + TBL_ENTRY(0xd98), TBL_ENTRY(0xd99), TBL_ENTRY(0xd9a), TBL_ENTRY(0xd9b), + TBL_ENTRY(0xd9c), TBL_ENTRY(0xd9d), TBL_ENTRY(0xd9e), TBL_ENTRY(0xd9f), + TBL_ENTRY(0xda0), TBL_ENTRY(0xda1), TBL_ENTRY(0xda2), TBL_ENTRY(0xda3), + TBL_ENTRY(0xda4), TBL_ENTRY(0xda5), TBL_ENTRY(0xda6), TBL_ENTRY(0xda7), + TBL_ENTRY(0xda8), TBL_ENTRY(0xda9), TBL_ENTRY(0xdaa), TBL_ENTRY(0xdab), + TBL_ENTRY(0xdac), TBL_ENTRY(0xdad), TBL_ENTRY(0xdae), TBL_ENTRY(0xdaf), + TBL_ENTRY(0xdb0), TBL_ENTRY(0xdb1), TBL_ENTRY(0xdb2), TBL_ENTRY(0xdb3), + TBL_ENTRY(0xdb4), TBL_ENTRY(0xdb5), TBL_ENTRY(0xdb6), TBL_ENTRY(0xdb7), + TBL_ENTRY(0xdb8), TBL_ENTRY(0xdb9), TBL_ENTRY(0xdba), TBL_ENTRY(0xdbb), + TBL_ENTRY(0xdbc), TBL_ENTRY(0xdbd), TBL_ENTRY(0xdbe), TBL_ENTRY(0xdbf), + TBL_ENTRY(0xdc0), TBL_ENTRY(0xdc1), TBL_ENTRY(0xdc2), TBL_ENTRY(0xdc3), + TBL_ENTRY(0xdc4), TBL_ENTRY(0xdc5), TBL_ENTRY(0xdc6), TBL_ENTRY(0xdc7), + TBL_ENTRY(0xdc8), TBL_ENTRY(0xdc9), TBL_ENTRY(0xdca), TBL_ENTRY(0xdcb), + TBL_ENTRY(0xdcc), TBL_ENTRY(0xdcd), TBL_ENTRY(0xdce), TBL_ENTRY(0xdcf), + TBL_ENTRY(0xdd0), TBL_ENTRY(0xdd1), TBL_ENTRY(0xdd2), TBL_ENTRY(0xdd3), + TBL_ENTRY(0xdd4), TBL_ENTRY(0xdd5), TBL_ENTRY(0xdd6), TBL_ENTRY(0xdd7), + TBL_ENTRY(0xdd8), TBL_ENTRY(0xdd9), TBL_ENTRY(0xdda), TBL_ENTRY(0xddb), + TBL_ENTRY(0xddc), TBL_ENTRY(0xddd), TBL_ENTRY(0xdde), TBL_ENTRY(0xddf), + TBL_ENTRY(0xde0), TBL_ENTRY(0xde1), TBL_ENTRY(0xde2), TBL_ENTRY(0xde3), + TBL_ENTRY(0xde4), TBL_ENTRY(0xde5), TBL_ENTRY(0xde6), TBL_ENTRY(0xde7), + TBL_ENTRY(0xde8), TBL_ENTRY(0xde9), TBL_ENTRY(0xdea), TBL_ENTRY(0xdeb), + TBL_ENTRY(0xdec), TBL_ENTRY(0xded), TBL_ENTRY(0xdee), TBL_ENTRY(0xdef), + TBL_ENTRY(0xdf0), TBL_ENTRY(0xdf1), TBL_ENTRY(0xdf2), TBL_ENTRY(0xdf3), + TBL_ENTRY(0xdf4), TBL_ENTRY(0xdf5), TBL_ENTRY(0xdf6), TBL_ENTRY(0xdf7), + TBL_ENTRY(0xdf8), TBL_ENTRY(0xdf9), TBL_ENTRY(0xdfa), TBL_ENTRY(0xdfb), + TBL_ENTRY(0xdfc), TBL_ENTRY(0xdfd), TBL_ENTRY(0xdfe), TBL_ENTRY(0xdff), + TBL_ENTRY(0xe00), TBL_ENTRY(0xe01), TBL_ENTRY(0xe02), TBL_ENTRY(0xe03), + TBL_ENTRY(0xe04), TBL_ENTRY(0xe05), TBL_ENTRY(0xe06), TBL_ENTRY(0xe07), + TBL_ENTRY(0xe08), TBL_ENTRY(0xe09), TBL_ENTRY(0xe0a), TBL_ENTRY(0xe0b), + TBL_ENTRY(0xe0c), TBL_ENTRY(0xe0d), TBL_ENTRY(0xe0e), TBL_ENTRY(0xe0f), + TBL_ENTRY(0xe10), TBL_ENTRY(0xe11), TBL_ENTRY(0xe12), TBL_ENTRY(0xe13), + TBL_ENTRY(0xe14), TBL_ENTRY(0xe15), TBL_ENTRY(0xe16), TBL_ENTRY(0xe17), + TBL_ENTRY(0xe18), TBL_ENTRY(0xe19), TBL_ENTRY(0xe1a), TBL_ENTRY(0xe1b), + TBL_ENTRY(0xe1c), TBL_ENTRY(0xe1d), TBL_ENTRY(0xe1e), TBL_ENTRY(0xe1f), + TBL_ENTRY(0xe20), TBL_ENTRY(0xe21), TBL_ENTRY(0xe22), TBL_ENTRY(0xe23), + TBL_ENTRY(0xe24), TBL_ENTRY(0xe25), TBL_ENTRY(0xe26), TBL_ENTRY(0xe27), + TBL_ENTRY(0xe28), TBL_ENTRY(0xe29), TBL_ENTRY(0xe2a), TBL_ENTRY(0xe2b), + TBL_ENTRY(0xe2c), TBL_ENTRY(0xe2d), TBL_ENTRY(0xe2e), TBL_ENTRY(0xe2f), + TBL_ENTRY(0xe30), TBL_ENTRY(0xe31), TBL_ENTRY(0xe32), TBL_ENTRY(0xe33), + TBL_ENTRY(0xe34), TBL_ENTRY(0xe35), TBL_ENTRY(0xe36), TBL_ENTRY(0xe37), + TBL_ENTRY(0xe38), TBL_ENTRY(0xe39), TBL_ENTRY(0xe3a), TBL_ENTRY(0xe3b), + TBL_ENTRY(0xe3c), TBL_ENTRY(0xe3d), TBL_ENTRY(0xe3e), TBL_ENTRY(0xe3f), + TBL_ENTRY(0xe40), TBL_ENTRY(0xe41), TBL_ENTRY(0xe42), TBL_ENTRY(0xe43), + TBL_ENTRY(0xe44), TBL_ENTRY(0xe45), TBL_ENTRY(0xe46), TBL_ENTRY(0xe47), + TBL_ENTRY(0xe48), TBL_ENTRY(0xe49), TBL_ENTRY(0xe4a), TBL_ENTRY(0xe4b), + TBL_ENTRY(0xe4c), TBL_ENTRY(0xe4d), TBL_ENTRY(0xe4e), TBL_ENTRY(0xe4f), + TBL_ENTRY(0xe50), TBL_ENTRY(0xe51), TBL_ENTRY(0xe52), TBL_ENTRY(0xe53), + TBL_ENTRY(0xe54), TBL_ENTRY(0xe55), TBL_ENTRY(0xe56), TBL_ENTRY(0xe57), + TBL_ENTRY(0xe58), TBL_ENTRY(0xe59), TBL_ENTRY(0xe5a), TBL_ENTRY(0xe5b), + TBL_ENTRY(0xe5c), TBL_ENTRY(0xe5d), TBL_ENTRY(0xe5e), TBL_ENTRY(0xe5f), + TBL_ENTRY(0xe60), TBL_ENTRY(0xe61), TBL_ENTRY(0xe62), TBL_ENTRY(0xe63), + TBL_ENTRY(0xe64), TBL_ENTRY(0xe65), TBL_ENTRY(0xe66), TBL_ENTRY(0xe67), + TBL_ENTRY(0xe68), TBL_ENTRY(0xe69), TBL_ENTRY(0xe6a), TBL_ENTRY(0xe6b), + TBL_ENTRY(0xe6c), TBL_ENTRY(0xe6d), TBL_ENTRY(0xe6e), TBL_ENTRY(0xe6f), + TBL_ENTRY(0xe70), TBL_ENTRY(0xe71), TBL_ENTRY(0xe72), TBL_ENTRY(0xe73), + TBL_ENTRY(0xe74), TBL_ENTRY(0xe75), TBL_ENTRY(0xe76), TBL_ENTRY(0xe77), + TBL_ENTRY(0xe78), TBL_ENTRY(0xe79), TBL_ENTRY(0xe7a), TBL_ENTRY(0xe7b), + TBL_ENTRY(0xe7c), TBL_ENTRY(0xe7d), TBL_ENTRY(0xe7e), TBL_ENTRY(0xe7f), + TBL_ENTRY(0xe80), TBL_ENTRY(0xe81), TBL_ENTRY(0xe82), TBL_ENTRY(0xe83), + TBL_ENTRY(0xe84), TBL_ENTRY(0xe85), TBL_ENTRY(0xe86), TBL_ENTRY(0xe87), + TBL_ENTRY(0xe88), TBL_ENTRY(0xe89), TBL_ENTRY(0xe8a), TBL_ENTRY(0xe8b), + TBL_ENTRY(0xe8c), TBL_ENTRY(0xe8d), TBL_ENTRY(0xe8e), TBL_ENTRY(0xe8f), + TBL_ENTRY(0xe90), TBL_ENTRY(0xe91), TBL_ENTRY(0xe92), TBL_ENTRY(0xe93), + TBL_ENTRY(0xe94), TBL_ENTRY(0xe95), TBL_ENTRY(0xe96), TBL_ENTRY(0xe97), + TBL_ENTRY(0xe98), TBL_ENTRY(0xe99), TBL_ENTRY(0xe9a), TBL_ENTRY(0xe9b), + TBL_ENTRY(0xe9c), TBL_ENTRY(0xe9d), TBL_ENTRY(0xe9e), TBL_ENTRY(0xe9f), + TBL_ENTRY(0xea0), TBL_ENTRY(0xea1), TBL_ENTRY(0xea2), TBL_ENTRY(0xea3), + TBL_ENTRY(0xea4), TBL_ENTRY(0xea5), TBL_ENTRY(0xea6), TBL_ENTRY(0xea7), + TBL_ENTRY(0xea8), TBL_ENTRY(0xea9), TBL_ENTRY(0xeaa), TBL_ENTRY(0xeab), + TBL_ENTRY(0xeac), TBL_ENTRY(0xead), TBL_ENTRY(0xeae), TBL_ENTRY(0xeaf), + TBL_ENTRY(0xeb0), TBL_ENTRY(0xeb1), TBL_ENTRY(0xeb2), TBL_ENTRY(0xeb3), + TBL_ENTRY(0xeb4), TBL_ENTRY(0xeb5), TBL_ENTRY(0xeb6), TBL_ENTRY(0xeb7), + TBL_ENTRY(0xeb8), TBL_ENTRY(0xeb9), TBL_ENTRY(0xeba), TBL_ENTRY(0xebb), + TBL_ENTRY(0xebc), TBL_ENTRY(0xebd), TBL_ENTRY(0xebe), TBL_ENTRY(0xebf), + TBL_ENTRY(0xec0), TBL_ENTRY(0xec1), TBL_ENTRY(0xec2), TBL_ENTRY(0xec3), + TBL_ENTRY(0xec4), TBL_ENTRY(0xec5), TBL_ENTRY(0xec6), TBL_ENTRY(0xec7), + TBL_ENTRY(0xec8), TBL_ENTRY(0xec9), TBL_ENTRY(0xeca), TBL_ENTRY(0xecb), + TBL_ENTRY(0xecc), TBL_ENTRY(0xecd), TBL_ENTRY(0xece), TBL_ENTRY(0xecf), + TBL_ENTRY(0xed0), TBL_ENTRY(0xed1), TBL_ENTRY(0xed2), TBL_ENTRY(0xed3), + TBL_ENTRY(0xed4), TBL_ENTRY(0xed5), TBL_ENTRY(0xed6), TBL_ENTRY(0xed7), + TBL_ENTRY(0xed8), TBL_ENTRY(0xed9), TBL_ENTRY(0xeda), TBL_ENTRY(0xedb), + TBL_ENTRY(0xedc), TBL_ENTRY(0xedd), TBL_ENTRY(0xede), TBL_ENTRY(0xedf), + TBL_ENTRY(0xee0), TBL_ENTRY(0xee1), TBL_ENTRY(0xee2), TBL_ENTRY(0xee3), + TBL_ENTRY(0xee4), TBL_ENTRY(0xee5), TBL_ENTRY(0xee6), TBL_ENTRY(0xee7), + TBL_ENTRY(0xee8), TBL_ENTRY(0xee9), TBL_ENTRY(0xeea), TBL_ENTRY(0xeeb), + TBL_ENTRY(0xeec), TBL_ENTRY(0xeed), TBL_ENTRY(0xeee), TBL_ENTRY(0xeef), + TBL_ENTRY(0xef0), TBL_ENTRY(0xef1), TBL_ENTRY(0xef2), TBL_ENTRY(0xef3), + TBL_ENTRY(0xef4), TBL_ENTRY(0xef5), TBL_ENTRY(0xef6), TBL_ENTRY(0xef7), + TBL_ENTRY(0xef8), TBL_ENTRY(0xef9), TBL_ENTRY(0xefa), TBL_ENTRY(0xefb), + TBL_ENTRY(0xefc), TBL_ENTRY(0xefd), TBL_ENTRY(0xefe), TBL_ENTRY(0xeff), + TBL_ENTRY(0xf00), TBL_ENTRY(0xf01), TBL_ENTRY(0xf02), TBL_ENTRY(0xf03), + TBL_ENTRY(0xf04), TBL_ENTRY(0xf05), TBL_ENTRY(0xf06), TBL_ENTRY(0xf07), + TBL_ENTRY(0xf08), TBL_ENTRY(0xf09), TBL_ENTRY(0xf0a), TBL_ENTRY(0xf0b), + TBL_ENTRY(0xf0c), TBL_ENTRY(0xf0d), TBL_ENTRY(0xf0e), TBL_ENTRY(0xf0f), + TBL_ENTRY(0xf10), TBL_ENTRY(0xf11), TBL_ENTRY(0xf12), TBL_ENTRY(0xf13), + TBL_ENTRY(0xf14), TBL_ENTRY(0xf15), TBL_ENTRY(0xf16), TBL_ENTRY(0xf17), + TBL_ENTRY(0xf18), TBL_ENTRY(0xf19), TBL_ENTRY(0xf1a), TBL_ENTRY(0xf1b), + TBL_ENTRY(0xf1c), TBL_ENTRY(0xf1d), TBL_ENTRY(0xf1e), TBL_ENTRY(0xf1f), + TBL_ENTRY(0xf20), TBL_ENTRY(0xf21), TBL_ENTRY(0xf22), TBL_ENTRY(0xf23), + TBL_ENTRY(0xf24), TBL_ENTRY(0xf25), TBL_ENTRY(0xf26), TBL_ENTRY(0xf27), + TBL_ENTRY(0xf28), TBL_ENTRY(0xf29), TBL_ENTRY(0xf2a), TBL_ENTRY(0xf2b), + TBL_ENTRY(0xf2c), TBL_ENTRY(0xf2d), TBL_ENTRY(0xf2e), TBL_ENTRY(0xf2f), + TBL_ENTRY(0xf30), TBL_ENTRY(0xf31), TBL_ENTRY(0xf32), TBL_ENTRY(0xf33), + TBL_ENTRY(0xf34), TBL_ENTRY(0xf35), TBL_ENTRY(0xf36), TBL_ENTRY(0xf37), + TBL_ENTRY(0xf38), TBL_ENTRY(0xf39), TBL_ENTRY(0xf3a), TBL_ENTRY(0xf3b), + TBL_ENTRY(0xf3c), TBL_ENTRY(0xf3d), TBL_ENTRY(0xf3e), TBL_ENTRY(0xf3f), + TBL_ENTRY(0xf40), TBL_ENTRY(0xf41), TBL_ENTRY(0xf42), TBL_ENTRY(0xf43), + TBL_ENTRY(0xf44), TBL_ENTRY(0xf45), TBL_ENTRY(0xf46), TBL_ENTRY(0xf47), + TBL_ENTRY(0xf48), TBL_ENTRY(0xf49), TBL_ENTRY(0xf4a), TBL_ENTRY(0xf4b), + TBL_ENTRY(0xf4c), TBL_ENTRY(0xf4d), TBL_ENTRY(0xf4e), TBL_ENTRY(0xf4f), + TBL_ENTRY(0xf50), TBL_ENTRY(0xf51), TBL_ENTRY(0xf52), TBL_ENTRY(0xf53), + TBL_ENTRY(0xf54), TBL_ENTRY(0xf55), TBL_ENTRY(0xf56), TBL_ENTRY(0xf57), + TBL_ENTRY(0xf58), TBL_ENTRY(0xf59), TBL_ENTRY(0xf5a), TBL_ENTRY(0xf5b), + TBL_ENTRY(0xf5c), TBL_ENTRY(0xf5d), TBL_ENTRY(0xf5e), TBL_ENTRY(0xf5f), + TBL_ENTRY(0xf60), TBL_ENTRY(0xf61), TBL_ENTRY(0xf62), TBL_ENTRY(0xf63), + TBL_ENTRY(0xf64), TBL_ENTRY(0xf65), TBL_ENTRY(0xf66), TBL_ENTRY(0xf67), + TBL_ENTRY(0xf68), TBL_ENTRY(0xf69), TBL_ENTRY(0xf6a), TBL_ENTRY(0xf6b), + TBL_ENTRY(0xf6c), TBL_ENTRY(0xf6d), TBL_ENTRY(0xf6e), TBL_ENTRY(0xf6f), + TBL_ENTRY(0xf70), TBL_ENTRY(0xf71), TBL_ENTRY(0xf72), TBL_ENTRY(0xf73), + TBL_ENTRY(0xf74), TBL_ENTRY(0xf75), TBL_ENTRY(0xf76), TBL_ENTRY(0xf77), + TBL_ENTRY(0xf78), TBL_ENTRY(0xf79), TBL_ENTRY(0xf7a), TBL_ENTRY(0xf7b), + TBL_ENTRY(0xf7c), TBL_ENTRY(0xf7d), TBL_ENTRY(0xf7e), TBL_ENTRY(0xf7f), + TBL_ENTRY(0xf80), TBL_ENTRY(0xf81), TBL_ENTRY(0xf82), TBL_ENTRY(0xf83), + TBL_ENTRY(0xf84), TBL_ENTRY(0xf85), TBL_ENTRY(0xf86), TBL_ENTRY(0xf87), + TBL_ENTRY(0xf88), TBL_ENTRY(0xf89), TBL_ENTRY(0xf8a), TBL_ENTRY(0xf8b), + TBL_ENTRY(0xf8c), TBL_ENTRY(0xf8d), TBL_ENTRY(0xf8e), TBL_ENTRY(0xf8f), + TBL_ENTRY(0xf90), TBL_ENTRY(0xf91), TBL_ENTRY(0xf92), TBL_ENTRY(0xf93), + TBL_ENTRY(0xf94), TBL_ENTRY(0xf95), TBL_ENTRY(0xf96), TBL_ENTRY(0xf97), + TBL_ENTRY(0xf98), TBL_ENTRY(0xf99), TBL_ENTRY(0xf9a), TBL_ENTRY(0xf9b), + TBL_ENTRY(0xf9c), TBL_ENTRY(0xf9d), TBL_ENTRY(0xf9e), TBL_ENTRY(0xf9f), + TBL_ENTRY(0xfa0), TBL_ENTRY(0xfa1), TBL_ENTRY(0xfa2), TBL_ENTRY(0xfa3), + TBL_ENTRY(0xfa4), TBL_ENTRY(0xfa5), TBL_ENTRY(0xfa6), TBL_ENTRY(0xfa7), + TBL_ENTRY(0xfa8), TBL_ENTRY(0xfa9), TBL_ENTRY(0xfaa), TBL_ENTRY(0xfab), + TBL_ENTRY(0xfac), TBL_ENTRY(0xfad), TBL_ENTRY(0xfae), TBL_ENTRY(0xfaf), + TBL_ENTRY(0xfb0), TBL_ENTRY(0xfb1), TBL_ENTRY(0xfb2), TBL_ENTRY(0xfb3), + TBL_ENTRY(0xfb4), TBL_ENTRY(0xfb5), TBL_ENTRY(0xfb6), TBL_ENTRY(0xfb7), + TBL_ENTRY(0xfb8), TBL_ENTRY(0xfb9), TBL_ENTRY(0xfba), TBL_ENTRY(0xfbb), + TBL_ENTRY(0xfbc), TBL_ENTRY(0xfbd), TBL_ENTRY(0xfbe), TBL_ENTRY(0xfbf), + TBL_ENTRY(0xfc0), TBL_ENTRY(0xfc1), TBL_ENTRY(0xfc2), TBL_ENTRY(0xfc3), + TBL_ENTRY(0xfc4), TBL_ENTRY(0xfc5), TBL_ENTRY(0xfc6), TBL_ENTRY(0xfc7), + TBL_ENTRY(0xfc8), TBL_ENTRY(0xfc9), TBL_ENTRY(0xfca), TBL_ENTRY(0xfcb), + TBL_ENTRY(0xfcc), TBL_ENTRY(0xfcd), TBL_ENTRY(0xfce), TBL_ENTRY(0xfcf), + TBL_ENTRY(0xfd0), TBL_ENTRY(0xfd1), TBL_ENTRY(0xfd2), TBL_ENTRY(0xfd3), + TBL_ENTRY(0xfd4), TBL_ENTRY(0xfd5), TBL_ENTRY(0xfd6), TBL_ENTRY(0xfd7), + TBL_ENTRY(0xfd8), TBL_ENTRY(0xfd9), TBL_ENTRY(0xfda), TBL_ENTRY(0xfdb), + TBL_ENTRY(0xfdc), TBL_ENTRY(0xfdd), TBL_ENTRY(0xfde), TBL_ENTRY(0xfdf), + TBL_ENTRY(0xfe0), TBL_ENTRY(0xfe1), TBL_ENTRY(0xfe2), TBL_ENTRY(0xfe3), + TBL_ENTRY(0xfe4), TBL_ENTRY(0xfe5), TBL_ENTRY(0xfe6), TBL_ENTRY(0xfe7), + TBL_ENTRY(0xfe8), TBL_ENTRY(0xfe9), TBL_ENTRY(0xfea), TBL_ENTRY(0xfeb), + TBL_ENTRY(0xfec), TBL_ENTRY(0xfed), TBL_ENTRY(0xfee), TBL_ENTRY(0xfef), + TBL_ENTRY(0xff0), TBL_ENTRY(0xff1), TBL_ENTRY(0xff2), TBL_ENTRY(0xff3), + TBL_ENTRY(0xff4), TBL_ENTRY(0xff5), TBL_ENTRY(0xff6), TBL_ENTRY(0xff7), + TBL_ENTRY(0xff8), TBL_ENTRY(0xff9), TBL_ENTRY(0xffa), TBL_ENTRY(0xffb), + TBL_ENTRY(0xffc), TBL_ENTRY(0xffd), TBL_ENTRY(0xffe), TBL_ENTRY(0xfff), +}; diff --git a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S b/arch/arm/cpu/armv7/uniphier/lowlevel_init.S new file mode 100644 index 0000000..0ea12d3 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/lowlevel_init.S @@ -0,0 +1,159 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <linux/linkage.h> +#include <asm/system.h> +#include <asm/arch/led.h> +#include <asm/arch/arm-mpcore.h> +#include <asm/arch/sbc-regs.h> + +ENTRY(lowlevel_init) + mov r8, lr @ persevere link reg across call + + /* + * The UniPhier Boot ROM loads SPL code to the L2 cache. + * But CPUs can only do instruction fetch now because start.S has + * cleared C and M bits. + * First we need to turn on MMU and Dcache again to get back + * data access to L2. + */ + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache + mcr p15, 0, r0, c1, c0, 0 + + /* + * Now we are using the page table embedded in the Boot ROM. + * It is not handy since it is not a straight mapped table for sLD3. + * What we need to do next is to switch over to the page table in SPL. + */ + ldr r3, =init_page_table @ page table must be 16KB aligned + + /* Disable MMU and Dcache before switching Page Table */ + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache + mcr p15, 0, r0, c1, c0, 0 + + bl enable_mmu + +#ifdef CONFIG_UNIPHIER_SMP + /* + * ACTLR (Auxiliary Control Register) for Cortex-A9 + * bit[9] Parity on + * bit[8] Alloc in one way + * bit[7] EXCL (Exclusive cache bit) + * bit[6] SMP + * bit[3] Write full line of zeros mode + * bit[2] L1 Prefetch enable + * bit[1] L2 prefetch enable + * bit[0] FW (Cache and TLB maintenance broadcast) + */ + mrc p15, 0, r0, c1, c0, 1 @ ACTLR (Auxiliary Control Register) + orr r0, r0, #0x41 @ enable SMP, FW bit + mcr p15, 0, r0, c1, c0, 1 + + /* branch by CPU ID */ + mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Register) + and r0, r0, #0x3 + cmp r0, #0x0 + beq primary_cpu + ldr r1, =ROM_BOOT_ROMRSV2 + mov r0, #0 + str r0, [r1] +0: wfe + ldr r0, [r1] + cmp r0, #0 + beq 0b + bx r0 @ r0: entry point of U-Boot main for the secondary CPU +primary_cpu: + ldr r1, =ROM_BOOT_ROMRSV2 + ldr r0, =_start @ entry for the secondary CPU + str r0, [r1] + ldr r0, [r1] @ make sure str is complete before sev + sev @ kick the sedoncary CPU + mrc p15, 4, r1, c15, c0, 0 @ Configuration Base Address Register + bfc r1, #0, #13 @ clear bit 12-0 + mov r0, #-1 + str r0, [r1, #SCU_INV_ALL] @ SCU Invalidate All Register + mov r0, #1 @ SCU enable + str r0, [r1, #SCU_CTRL] @ SCU Control Register +#endif + + bl setup_init_ram @ RAM area for temporary stack pointer + + mov lr, r8 @ restore link + mov pc, lr @ back to my caller +ENDPROC(lowlevel_init) + +ENTRY(enable_mmu) + mrc p15, 0, r0, c2, c0, 2 @ TTBCR (Translation Table Base Control Register) + bic r0, r0, #0x37 + orr r0, r0, #0x20 @ disable TTBR1 + mcr p15, 0, r0, c2, c0, 2 + + orr r0, r3, #0x8 @ Outer Cacheability for table walks: WBWA + mcr p15, 0, r0, c2, c0, 0 @ TTBR0 + + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs + + mov r0, #-1 @ manager for all domains (No permission check) + mcr p15, 0, r0, c3, c0, 0 @ DACR (Domain Access Control Register) + + dsb + isb + /* + * MMU on: + * TLBs was already invalidated in "../start.S" + * So, we don't need to invalidate it here. + */ + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable + mcr p15, 0, r0, c1, c0, 0 + + mov pc, lr +ENDPROC(enable_mmu) + +#include <asm/arch/ssc-regs.h> + +#define BOOT_RAM_SIZE (SSC_WAY_SIZE) +#define BOOT_WAY_BITS (0x00000100) /* way 8 */ + +ENTRY(setup_init_ram) + /* + * Touch to zero for the boot way + */ +0: + /* + * set SSCOQM, SSCOQAD, SSCOQSZ, SSCOQWN in this order + */ + ldr r0, = 0x00408006 @ touch to zero with address range + ldr r1, = SSCOQM + str r0, [r1] + ldr r0, = (CONFIG_SYS_INIT_SP_ADDR - BOOT_RAM_SIZE) @ base address + ldr r1, = SSCOQAD + str r0, [r1] + ldr r0, = BOOT_RAM_SIZE + ldr r1, = SSCOQSZ + str r0, [r1] + ldr r0, = BOOT_WAY_BITS + ldr r1, = SSCOQWN + str r0, [r1] + ldr r1, = SSCOPPQSEF + ldr r0, [r1] + cmp r0, #0 @ check if the command is successfully set + bne 0b @ try again if an error occurres + + ldr r1, = SSCOLPQS +1: + ldr r0, [r1] + cmp r0, #0x4 + bne 1b @ wait until the operation is completed + str r0, [r1] @ clear the complete notification flag + + mov pc, lr +ENDPROC(setup_init_ram) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile new file mode 100644 index 0000000..b385e19 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -0,0 +1,10 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += boot-mode.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ + sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o +obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ + umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c new file mode 100644 index 0000000..85f37f2 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/bcu-regs.h> + +#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) + +void bcu_init(void) +{ + int shift; + + writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */ + writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */ + + /* Specify DDR channel */ + shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; + writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c new file mode 100644 index 0000000..27d772e --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/board.h> + +int checkboard(void) +{ + puts("Board: PH1-LD4 Board\n"); + + return check_support_card(); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c new file mode 100644 index 0000000..4302277 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/led.h> +#include <asm/arch/board.h> + +void bcu_init(void); +void sbc_init(void); +void sg_init(void); +void pll_init(void); +void pin_init(void); +void clkrst_init(void); + +int board_postclk_init(void) +{ + bcu_init(); + + sbc_init(); + + sg_init(); + + pll_init(); + + uniphier_board_init(); + + led_write(B, 1, , ); + + clkrst_init(); + + led_write(B, 2, , ); + + pin_init(); + + led_write(B, 3, , ); + + return 0; +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c new file mode 100644 index 0000000..d359b56 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c @@ -0,0 +1 @@ +#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c new file mode 100644 index 0000000..18965a9 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sc-regs.h> + +void clkrst_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); + tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 + | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC + | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c new file mode 100644 index 0000000..a742940 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sg-regs.h> + +void pin_init(void) +{ + u32 tmp; + + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */ + sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */ + + sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */ + sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */ + + sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */ + sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */ + + sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ + sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ +#endif + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */ + sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */ + sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */ + sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */ + sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */ + sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */ + sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */ + sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */ + sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */ + sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */ + sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */ + sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */ + sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */ + sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */ + sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */ + sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */ + /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */ +#endif + + tmp = readl(SG_IECTRL); + tmp |= 0x41; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c new file mode 100644 index 0000000..68b9d5f --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sc-regs.h> +#include <asm/arch/sg-regs.h> + +#undef DPLL_SSC_RATE_1PER + +void dpll_init(void) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT (DPLLCTRL.bit[29:20]) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~0x000f0000; +#if CONFIG_DDR_FREQ == 1600 + tmp |= 0x000c0000; +#elif CONFIG_DDR_FREQ == 1333 + tmp |= 0x000d0000; +#else +# error "Unknown frequency" +#endif + +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~SC_DPLLCTRL_SSC_RATE; +#else + tmp |= SC_DPLLCTRL_SSC_RATE; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); +} + +void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void pll_init(void) +{ + dpll_init(); + upll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 10 usec in upll_init() and vpll_init() + * so 20 usec can be saved here. + */ + udelay(480); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c new file mode 100644 index 0000000..837b2a8 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c @@ -0,0 +1 @@ +#include "../ph1-pro4/pll_spectrum.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c new file mode 100644 index 0000000..a37ed16 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sbc-regs.h> +#include <asm/arch/sg-regs.h> + +void sbc_init(void) +{ + /* XECS1: sub/boot memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + +#if !defined(CONFIG_SPL_BUILD) + /* XECS0: boot/sub memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); +#endif + /* XECS3: peripherals */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); + + /* base address regsiters */ + writel(0x0000bc01, SBBASE0); + writel(0x0400bc01, SBBASE1); + writel(0x0800bf01, SBBASE3); + +#if !defined(CONFIG_SPL_BUILD) + /* enable access to sub memory when boot swap is on */ + sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ +#endif + sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c new file mode 100644 index 0000000..b4dd799 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sg-regs.h> + +void sg_init(void) +{ + u32 tmp; + + /* Set DDR size */ + tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); + tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); +#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE + tmp |= SG_MEMCONF_SPARSEMEM; +#endif + writel(tmp, SG_MEMCONF); + + /* Input ports must be enabled deasserting reset of cores */ + tmp = readl(SG_IECTRL); + tmp |= 0x1; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c new file mode 100644 index 0000000..1344ac1 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/umc-regs.h> + +static inline void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000000, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x000fffcf, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_FRCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ + if (freq == 1333) { + writel(0x45990b11, dramcont + UMC_CMDCTLA); + writel(0x16958924, dramcont + UMC_CMDCTLB); + writel(0x5101046A, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x27028B0A, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x38028B0A, dramcont + UMC_INITCTLB); + + writel(0x000FF0FF, dramcont + UMC_INITCTLC); + writel(0x00000b51, dramcont + UMC_DRMMR0); + } else if (freq == 1600) { + writel(0x36BB0F17, dramcont + UMC_CMDCTLA); + writel(0x18C6AA24, dramcont + UMC_CMDCTLB); + writel(0x5101387F, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x2F030D3F, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x43030D3F, dramcont + UMC_INITCTLB); + + writel(0x00FF00FF, dramcont + UMC_INITCTLC); + writel(0x00000d71, dramcont + UMC_DRMMR0); + } + + writel(0x00000006, dramcont + UMC_DRMMR1); + + if (freq == 1333) + writel(0x00000290, dramcont + UMC_DRMMR2); + else if (freq == 1600) + writel(0x00000298, dramcont + UMC_DRMMR2); + + writel(0x00000800, dramcont + UMC_DRMMR3); + + if (freq == 1333) { + if (size == 1) + writel(0x00240512, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x00350512, dramcont + UMC_SPCCTLA); + + writel(0x00ff0006, dramcont + UMC_SPCCTLB); + writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); + } else if (freq == 1600) { + if (size == 1) + writel(0x002B0617, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x003F0617, dramcont + UMC_SPCCTLA); + + writel(0x00ff0008, dramcont + UMC_SPCCTLB); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); + } + + writel(0x04060806, dramcont + UMC_WDATACTL_D0); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x00000003, dramcont + 0x7000); + writel(0x0000000f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000071, dramcont + 0x8008); + writel(0x0000003b, dramcont + UMC_DICGCTLA); + writel(0x020a0808, dramcont + UMC_DICGCTLB); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00000000, dramcont + UMC_SPCSETD); + writel(0x00000520, dramcont + UMC_DFICUPDCTLA); +} + +static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int umc_init(void) +{ + return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, + CONFIG_SDRAM1_SIZE / 0x08000000); +} + +#if CONFIG_DDR_FREQ != 1333 && CONFIG_DDR_FREQ != 1600 +#error Unsupported DDR Frequency. +#endif + +#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ + (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ + CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 +/* OK */ +#else +#error Unsupported DDR configuration. +#endif diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile new file mode 100644 index 0000000..712afd1 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -0,0 +1,10 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += boot-mode.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \ + sg_init.o pll_init.o clkrst_init.o pinctrl.o +obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ + umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c new file mode 100644 index 0000000..325a4f6 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/board.h> + +int checkboard(void) +{ + puts("Board: PH1-Pro4 Board\n"); + + return check_support_card(); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c new file mode 100644 index 0000000..7198829 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/led.h> +#include <asm/arch/board.h> + +void sbc_init(void); +void sg_init(void); +void pll_init(void); +void pin_init(void); +void clkrst_init(void); + +int board_postclk_init(void) +{ + sbc_init(); + + sg_init(); + + pll_init(); + + uniphier_board_init(); + + led_write(B, 1, , ); + + clkrst_init(); + + led_write(B, 2, , ); + + pin_init(); + + led_write(B, 3, , ); + + return 0; +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c new file mode 100644 index 0000000..33bccff --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/boot-device.h> +#include <asm/arch/sg-regs.h> +#include <asm/arch/sbc-regs.h> + +struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, ""} +}; + +u32 get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 spl_boot_device(void) +{ + u32 boot_mode; + + if (boot_is_swapped()) + return BOOT_DEVICE_NOR; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c new file mode 100644 index 0000000..18965a9 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sc-regs.h> + +void clkrst_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); + tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 + | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC + | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c new file mode 100644 index 0000000..503c247 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sg-regs.h> + +void pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ + sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ + sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ + sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ + sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ + sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ + sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ + sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ +#endif + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ + sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ + sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ + sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ + sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ + sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ + sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ + sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ + sg_set_pinsel(48, 0); /* NFALE -> NFALE */ + sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ + sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ + sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ + sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ + sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c new file mode 100644 index 0000000..2dcc089 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sc-regs.h> +#include <asm/arch/sg-regs.h> + +#undef DPLL_SSC_RATE_1PER + +void dpll_init(void) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT ( DPLLCTRL.bit[29:20] ) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~(0x000f0000); +#if CONFIG_DDR_FREQ == 1600 + tmp |= 0x000c0000; +#elif CONFIG_DDR_FREQ == 1333 + tmp |= 0x000d0000; +#else +# error "Unsupported frequency" +#endif + + /* + * Set Moduration rate + * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) + */ +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~0x00008000; +#else + tmp |= 0x00008000; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); +} + +void stop_mpll(void) +{ + u32 tmp; + + tmp = readl(SC_MPLLOSCCTL); + + if (!(tmp & SC_MPLLOSCCTL_MPLLST)) + return; /* already stopped */ + + tmp &= ~SC_MPLLOSCCTL_MPLLEN; + writel(tmp, SC_MPLLOSCCTL); + + while (readl(SC_MPLLOSCCTL) & SC_MPLLOSCCTL_MPLLST) + ; +} + +void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + /* Set VPLL27A & VPLL27B */ + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + +#if defined(CONFIG_MACH_PH1_PRO4) + /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) + return; +#endif + + /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Unset VPLA_K_LD and VPLB_K_LD bit */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set VPLA_M and VPLB_M to 0x20 */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { + /* Set VPLA_K and VPLB_K for AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* wait 1 usec */ + udelay(1); + + /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Unset VPLA_SNRST and VPLB_SNRST bit */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void pll_init(void) +{ + dpll_init(); + stop_mpll(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 1 usec in vpll_init() so 1 usec can be saved here. + */ + udelay(499); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c new file mode 100644 index 0000000..4538d1a --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sc-regs.h> + +void enable_dpll_ssc(void) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c new file mode 100644 index 0000000..f113db5 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sbc-regs.h> +#include <asm/arch/sg-regs.h> + +void sbc_init(void) +{ +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (readl(SBBASE0) & 0x1) { + /* + * Boot Swap Off: boot from mask ROM + * 0x00000000-0x01ffffff: mask ROM + * 0x02000000-0x3effffff: memory bank (31MB) + * 0x03f00000-0x3fffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } else { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * + * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank + * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } +#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +#if !defined(CONFIG_SPL_BUILD) + /* XECS0: boot/sub memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); +#endif + /* XECS1: sub/boot memory (boot swap = off/on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + + /* XECS3: peripherals */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); + + writel(0x0000bc01, SBBASE0); /* boot memory */ + writel(0x0400bc01, SBBASE1); /* sub memory */ + writel(0x0800bf01, SBBASE3); /* peripherals */ + +#if !defined(CONFIG_SPL_BUILD) + sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ +#endif + sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ + writel(0x00000001, SG_LOADPINCTRL); + +#endif /* CONFIG_XXX_MICRO_SUPPORT_CARD */ +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c new file mode 100644 index 0000000..b4dd799 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sg-regs.h> + +void sg_init(void) +{ + u32 tmp; + + /* Set DDR size */ + tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); + tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); +#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE + tmp |= SG_MEMCONF_SPARSEMEM; +#endif + writel(tmp, SG_MEMCONF); + + /* Input ports must be enabled deasserting reset of cores */ + tmp = readl(SG_IECTRL); + tmp |= 0x1; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c new file mode 100644 index 0000000..dd46287 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c @@ -0,0 +1,136 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/umc-regs.h> + +static inline void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000001, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x07ffffff, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + + writel(0x03010100, ssif_base + UMC_HDMCHSEL); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DVCCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */ + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_HDMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_HDDRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_GIORST); + writel(0x00000001, ssif_base + UMC_HD2RST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_DVCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_VPERST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ + writel(0x66bb0f17, dramcont + UMC_CMDCTLA); + writel(0x18c6aa44, dramcont + UMC_CMDCTLB); + writel(0x5101387f, dramcont + UMC_INITCTLA); + writel(0x43030d3f, dramcont + UMC_INITCTLB); + writel(0x00ff00ff, dramcont + UMC_INITCTLC); + writel(0x00000d71, dramcont + UMC_DRMMR0); + writel(0x00000006, dramcont + UMC_DRMMR1); + writel(0x00000298, dramcont + UMC_DRMMR2); + writel(0x00000000, dramcont + UMC_DRMMR3); + writel(0x003f0617, dramcont + UMC_SPCCTLA); + writel(0x00ff0008, dramcont + UMC_SPCCTLB); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D1); + writel(0x04060802, dramcont + UMC_WDATACTL_D0); + writel(0x04060802, dramcont + UMC_WDATACTL_D1); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x0000000f, dramcont + 0x7000); + writel(0x0000000f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000071, dramcont + 0x8008); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x00000000, dramcont + 0x0060); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00010000, dramcont + UMC_SPCSETD); + writel(0x80000020, dramcont + UMC_DFICUPDCTLA); +} + +static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + writel(0x00000103, dramcont0 + UMC_DIOCTLA); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + writel(0x00000103, dramcont1 + UMC_DIOCTLA); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int umc_init(void) +{ + return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, + CONFIG_SDRAM1_SIZE / 0x08000000); +} + +#if CONFIG_DDR_FREQ != 1600 +#error Unsupported DDR frequency. +#endif + +#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ + (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ + ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ + (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) +/* OK */ +#else + #error Unsupported DDR configuration. +#endif diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile new file mode 100644 index 0000000..b385e19 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -0,0 +1,10 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += boot-mode.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ + sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o +obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ + umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c new file mode 100644 index 0000000..69b172e --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c @@ -0,0 +1 @@ +#include "../ph1-ld4/bcu_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c new file mode 100644 index 0000000..15dc289 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/board.h> + +int checkboard(void) +{ + puts("Board: PH1-sLD8 Board\n"); + + return check_support_card(); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c new file mode 100644 index 0000000..287b33c --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c @@ -0,0 +1 @@ +#include "../ph1-ld4/board_postclk_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c new file mode 100644 index 0000000..d359b56 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c @@ -0,0 +1 @@ +#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c new file mode 100644 index 0000000..18965a9 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sc-regs.h> + +void clkrst_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); + tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 + | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC + | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c new file mode 100644 index 0000000..2b6403f --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sg-regs.h> + +void pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */ + sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */ + + sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */ + sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */ + + sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */ + sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */ + + sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ + sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ +#endif + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ + sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ + sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */ + sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */ + sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */ + sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */ + sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */ + sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */ + sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */ + sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */ + sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */ + sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */ + sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */ + sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */ + sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */ + sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(114, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ + /* sg_set_pinsel(115, 4); */ /* RXD1 -> USB2OD */ +#endif +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c new file mode 100644 index 0000000..4d87053 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sc-regs.h> +#include <asm/arch/sg-regs.h> + +void dpll_init(void) +{ + u32 tmp; + /* + * Set DPLL SSC parameters for DPLLCTRL3 + * [23] DIVN_TEST 0x1 + * [22:16] DIVN 0x50 + * [10] FREFSEL_TEST 0x1 + * [9:8] FREFSEL 0x2 + * [4] ICPD_TEST 0x1 + * [3:0] ICPD 0xb + */ + tmp = readl(SC_DPLLCTRL3); + tmp &= ~0x00ff0717; + tmp |= 0x00d0061b; + writel(tmp, SC_DPLLCTRL3); + + /* + * Set DPLL SSC parameters for DPLLCTRL + * <-1%> <-2%> + * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084) + * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~0x3ff07fff; +#ifdef CONFIG_DPLL_SSC_RATE_1PER + tmp |= 0x084018bf; +#else + tmp |= 0x084031a6; +#endif + writel(tmp, SC_DPLLCTRL); + + /* + * Set DPLL SSC parameters for DPLLCTRL2 + * [31:29] SSC_STEP 0 + * [27] SSC_REG_REF 1 + * [26:20] SSC_M 79 (0x4f) + * [19:0] SSC_K 964689 (0xeb851) + */ + tmp = readl(SC_DPLLCTRL2); + tmp &= ~0xefffffff; + tmp |= 0x0cfeb851; + writel(tmp, SC_DPLLCTRL2); +} + +void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +void pll_init(void) +{ + dpll_init(); + upll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 10 usec in upll_init() and vpll_init() + * so 20 usec can be saved here. + */ + udelay(480); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c new file mode 100644 index 0000000..9b8c485 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c @@ -0,0 +1 @@ +#include "../ph1-ld4/pll_spectrum.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c new file mode 100644 index 0000000..af44dee --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sbc-regs.h> +#include <asm/arch/sg-regs.h> + +void sbc_init(void) +{ +#if !defined(CONFIG_SPL_BUILD) + /* XECS0 : dummy */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); +#endif + /* XECS1 : boot memory (always boot swap = on) */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + + /* XECS4 : sub memory */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); + + /* XECS5 : peripherals */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); + + /* base address regsiters */ + writel(0x0000bc01, SBBASE0); /* boot memory */ + writel(0x0900bfff, SBBASE1); /* dummy */ + writel(0x0400bc01, SBBASE4); /* sub memory */ + writel(0x0800bf01, SBBASE5); /* peripherals */ + + sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ + sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ + + /* dummy read to assure write process */ + readl(SG_PINCTRL(33)); +} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c new file mode 100644 index 0000000..a808289 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c @@ -0,0 +1 @@ +#include "../ph1-ld4/sg_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c new file mode 100644 index 0000000..ff2dcb1 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/umc-regs.h> + +static inline void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000000, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x000fffcf, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_FRCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ +#ifdef CONFIG_DDR_STANDARD + writel(0x55990b11, dramcont + UMC_CMDCTLA); + writel(0x16958944, dramcont + UMC_CMDCTLB); +#else + writel(0x45990b11, dramcont + UMC_CMDCTLA); + writel(0x16958924, dramcont + UMC_CMDCTLB); +#endif + + writel(0x5101046A, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x27028B0A, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x38028B0A, dramcont + UMC_INITCTLB); + + writel(0x00FF00FF, dramcont + UMC_INITCTLC); + writel(0x00000b51, dramcont + UMC_DRMMR0); + writel(0x00000006, dramcont + UMC_DRMMR1); + writel(0x00000290, dramcont + UMC_DRMMR2); + +#ifdef CONFIG_DDR_STANDARD + writel(0x00000000, dramcont + UMC_DRMMR3); +#else + writel(0x00000800, dramcont + UMC_DRMMR3); +#endif + + if (size == 1) + writel(0x00240512, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x00350512, dramcont + UMC_SPCCTLA); + + writel(0x00ff0006, dramcont + UMC_SPCCTLB); + writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); + writel(0x04060806, dramcont + UMC_WDATACTL_D0); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x00000003, dramcont + 0x7000); + writel(0x0000004f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000077, dramcont + 0x8008); + writel(0x0000003b, dramcont + UMC_DICGCTLA); + writel(0x020a0808, dramcont + UMC_DICGCTLB); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00000000, dramcont + UMC_SPCSETD); + writel(0x00000520, dramcont + UMC_DFICUPDCTLA); +} + +static inline int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int umc_init(void) +{ + return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, + CONFIG_SDRAM1_SIZE / 0x08000000); +} + +#if CONFIG_DDR_FREQ != 1333 +#error Unsupported DDR frequency. +#endif + +#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ + (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ + CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 +/* OK */ +#else +#error Unsupported DDR configuration. +#endif diff --git a/arch/arm/cpu/armv7/uniphier/reset.c b/arch/arm/cpu/armv7/uniphier/reset.c new file mode 100644 index 0000000..b0dc967 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/reset.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sc-regs.h> +#include <asm/arch/board.h> + +void reset_cpu(unsigned long ignored) +{ + u32 tmp; + + uniphier_board_reset(); + + writel(5, SC_IRQTIMSET); /* default value */ + + tmp = readl(SC_SLFRSTSEL); + tmp &= ~0x3; /* mask [1:0] */ + tmp |= 0x0; /* XRST reboot */ + writel(tmp, SC_SLFRSTSEL); + + tmp = readl(SC_SLFRSTCTL); + tmp |= 0x1; + writel(tmp, SC_SLFRSTCTL); +} diff --git a/arch/arm/cpu/armv7/uniphier/smp.S b/arch/arm/cpu/armv7/uniphier/smp.S new file mode 100644 index 0000000..25ba981 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/smp.S @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2013 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <linux/linkage.h> +#include <asm/system.h> +#include <asm/arch/led.h> +#include <asm/arch/sbc-regs.h> + +/* Entry point of U-Boot main program for the secondary CPU */ +LENTRY(secondary_entry) + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register) + bic r0, r0, #(CR_C | CR_M) @ MMU and Dcache disable + mcr p15, 0, r0, c1, c0, 0 + mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r0, c7, c5, 0 @ invalidate icache + dsb + led_write(C,0,,) + ldr r1, =ROM_BOOT_ROMRSV2 + mov r0, #0 + str r0, [r1] +0: wfe + ldr r4, [r1] @ r4: entry point for secondary CPUs + cmp r4, #0 + beq 0b + led_write(C, P, U, 1) + bx r4 @ secondary CPUs jump to linux +ENDPROC(secondary_entry) + +ENTRY(wakeup_secondary) + ldr r1, =ROM_BOOT_ROMRSV2 +0: ldr r0, [r1] + cmp r0, #0 + bne 0b + + /* set entry address and send event to the secondary CPU */ + ldr r0, =secondary_entry + str r0, [r1] + ldr r0, [r1] @ make sure store is complete + mov r0, #0x100 +0: subs r0, r0, #1 @ I don't know the reason, but without this wait + bne 0b @ fails to wake up the secondary CPU + sev + + /* wait until the secondary CPU reach to secondary_entry */ +0: ldr r0, [r1] + cmp r0, #0 + bne 0b + bx lr +ENDPROC(wakeup_secondary) diff --git a/arch/arm/cpu/armv7/uniphier/spl.c b/arch/arm/cpu/armv7/uniphier/spl.c new file mode 100644 index 0000000..40d28ad --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/spl.c @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> + +void spl_board_init(void) +{ +#if defined(CONFIG_BOARD_POSTCLK_INIT) + board_postclk_init(); +#endif + dram_init(); +} diff --git a/arch/arm/cpu/armv7/uniphier/support_card.c b/arch/arm/cpu/armv7/uniphier/support_card.c new file mode 100644 index 0000000..40d4940 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/support_card.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/board.h> + +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) + +#define PFC_MICRO_SUPPORT_CARD_RESET \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) +#define PFC_MICRO_SUPPORT_CARD_REVISION \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) +/* + * 0: reset deassert, 1: reset + * + * bit[0]: LAN, I2C, LED + * bit[1]: UART + */ +void support_card_reset_deassert(void) +{ + writel(0, PFC_MICRO_SUPPORT_CARD_RESET); +} + +void support_card_reset(void) +{ + writel(3, PFC_MICRO_SUPPORT_CARD_RESET); +} + +static int support_card_show_revision(void) +{ + u32 revision; + + revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); + printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); + return 0; +} +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) + +#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) +#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) +#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) +#define DCC_MICRO_SUPPORT_CARD_REVISION \ + ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) + +void support_card_reset_deassert(void) +{ + writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ + writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ + writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ +} + +void support_card_reset(void) +{ + writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ + writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ + writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ +} + +static int support_card_show_revision(void) +{ + u32 revision; + + revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); + + if (revision >= 0x67) { + printf("(DCC CPLD version 3.%d.%d)\n", + revision >> 4, revision & 0xf); + return 0; + } else { + printf("(DCC CPLD unknown version)\n"); + return -1; + } +} +#endif + +void support_card_init(void) +{ + /* + * After power on, we need to keep the LAN controller in reset state + * for a while. (200 usec) + * Fortunatelly, enough wait time is already inserted in pll_init() + * function. So we do not have to wait here. + */ + support_card_reset_deassert(); +} + +int check_support_card(void) +{ + printf("SC: Micro Support Card "); + return support_card_show_revision(); +} + +#if defined(CONFIG_SMC911X) +#include <netdev.h> + +int board_eth_init(bd_t *bis) +{ + return smc911x_initialize(0, CONFIG_SMC911X_BASE); +} +#endif + +#if !defined(CONFIG_SYS_NO_FLASH) + +#include <mtd/cfi_flash.h> + +#if CONFIG_SYS_MAX_FLASH_BANKS > 1 +static phys_addr_t flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS] = + CONFIG_SYS_FLASH_BANKS_LIST; + +phys_addr_t cfi_flash_bank_addr(int i) +{ + return flash_banks_list[i]; +} +#endif + +int mem_is_flash(phys_addr_t base) +{ + const int loop = 128; + u32 *scratch_addr; + u32 saved_value; + int ret = 1; + int i; + + scratch_addr = map_physmem(base + 0x01e00000, + sizeof(u32) * loop, MAP_NOCACHE); + + for (i = 0; i < loop; i++, scratch_addr++) { + saved_value = readl(scratch_addr); + writel(~saved_value, scratch_addr); + if (readl(scratch_addr) != saved_value) { + /* We assume no memory or SRAM here. */ + writel(saved_value, scratch_addr); + ret = 0; + break; + } + } + + unmap_physmem(scratch_addr, MAP_NOCACHE); + + return ret; +} + +int board_flash_wp_on(void) +{ + int i; + int ret = 1; + + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { + if (mem_is_flash(cfi_flash_bank_addr(i))) { + /* + * We found at least one flash. + * We need to return 0 and call flash_init(). + */ + ret = 0; + } +#if CONFIG_SYS_MAX_FLASH_BANKS > 1 + else { + /* + * We might have a SRAM here. + * To prevent SRAM data from being destroyed, + * we set dummy address (SDRAM). + */ + flash_banks_list[i] = 0x80000000 + 0x10000 * i; + } +#endif + } + + return ret; +} +#endif diff --git a/arch/arm/cpu/armv7/uniphier/timer.c b/arch/arm/cpu/armv7/uniphier/timer.c new file mode 100644 index 0000000..6edc084 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/timer.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/arm-mpcore.h> + +#define PERIPHCLK (50 * 1000 * 1000) /* 50 MHz */ +#define PRESCALER ((PERIPHCLK) / (CONFIG_SYS_TIMER_RATE) - 1) + +static void *get_global_timer_base(void) +{ + void *val; + + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (val) : : "memory"); + + return val + GLOBAL_TIMER_OFFSET; +} + +unsigned long timer_read_counter(void) +{ + /* + * ARM 64bit Global Timer is too much for our purpose. + * We use only lower 32 bit of the timer counter. + */ + return readl(get_global_timer_base() + GTIMER_CNT_L); +} + +int timer_init(void) +{ + /* enable timer */ + writel(PRESCALER << 8 | 1, get_global_timer_base() + GTIMER_CTRL); + + return 0; +} diff --git a/arch/arm/cpu/armv8/fsl-lsch3/Makefile b/arch/arm/cpu/armv8/fsl-lsch3/Makefile index 9249537..f920eeb 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/Makefile +++ b/arch/arm/cpu/armv8/fsl-lsch3/Makefile @@ -7,3 +7,5 @@ obj-y += cpu.o obj-y += lowlevel.o obj-y += speed.o +obj-$(CONFIG_MP) += mp.o +obj-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c index c129d03..47b947f 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c @@ -11,6 +11,7 @@ #include <asm/io.h> #include <asm/arch-fsl-lsch3/immap_lsch3.h> #include "cpu.h" +#include "mp.h" #include "speed.h" #include <fsl_mc.h> @@ -434,3 +435,15 @@ int cpu_eth_init(bd_t *bis) #endif return error; } + + +int arch_early_init_r(void) +{ + int rv; + rv = fsl_lsch3_wake_seconday_cores(); + + if (rv) + printf("Did not wake secondary cores\n"); + + return 0; +} diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.h b/arch/arm/cpu/armv8/fsl-lsch3/cpu.h index 28544d7..2e3312b 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.h +++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.h @@ -5,3 +5,4 @@ */ int fsl_qoriq_core_to_cluster(unsigned int core); +u32 cpu_mask(void); diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c new file mode 100644 index 0000000..e392eb9 --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c @@ -0,0 +1,58 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <libfdt.h> +#include <fdt_support.h> +#include "mp.h" + +#ifdef CONFIG_MP +void ft_fixup_cpu(void *blob) +{ + int off; + __maybe_unused u64 spin_tbl_addr = (u64)get_spin_tbl_addr(); + fdt32_t *reg; + int addr_cells; + u64 val; + size_t *boot_code_size = &(__secondary_boot_code_size); + + off = fdt_path_offset(blob, "/cpus"); + if (off < 0) { + puts("couldn't find /cpus node\n"); + return; + } + of_bus_default_count_cells(blob, off, &addr_cells, NULL); + + off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); + while (off != -FDT_ERR_NOTFOUND) { + reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0); + if (reg) { + val = spin_tbl_addr; + val += id_to_core(of_read_number(reg, addr_cells)) + * SPIN_TABLE_ELEM_SIZE; + val = cpu_to_fdt64(val); + fdt_setprop_string(blob, off, "enable-method", + "spin-table"); + fdt_setprop(blob, off, "cpu-release-addr", + &val, sizeof(val)); + } else { + puts("Warning: found cpu node without reg property\n"); + } + off = fdt_node_offset_by_prop_value(blob, off, "device_type", + "cpu", 4); + } + + fdt_add_mem_rsv(blob, (uintptr_t)&secondary_boot_code, + *boot_code_size); +} +#endif + +void ft_cpu_setup(void *blob, bd_t *bd) +{ +#ifdef CONFIG_MP + ft_fixup_cpu(blob); +#endif +} diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S index ad32b6c..2a88aab 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S @@ -8,7 +8,9 @@ #include <config.h> #include <linux/linkage.h> +#include <asm/gic.h> #include <asm/macro.h> +#include "mp.h" ENTRY(lowlevel_init) mov x29, lr /* Save LR */ @@ -35,31 +37,114 @@ ENTRY(lowlevel_init) #endif #endif - branch_if_master x0, x1, 1f + branch_if_master x0, x1, 2f + ldr x0, =secondary_boot_func + blr x0 +2: + mov lr, x29 /* Restore LR */ + ret +ENDPROC(lowlevel_init) + + /* Keep literals not used by the secondary boot code outside it */ + .ltorg + + /* Using 64 bit alignment since the spin table is accessed as data */ + .align 4 + .global secondary_boot_code + /* Secondary Boot Code starts here */ +secondary_boot_code: + .global __spin_table +__spin_table: + .space CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE + + .align 2 +ENTRY(secondary_boot_func) /* - * Slave should wait for master clearing spin table. - * This sync prevent salves observing incorrect - * value of spin table and jumping to wrong place. + * MPIDR_EL1 Fields: + * MPIDR[1:0] = AFF0_CPUID <- Core ID (0,1) + * MPIDR[7:2] = AFF0_RES + * MPIDR[15:8] = AFF1_CLUSTERID <- Cluster ID (0,1,2,3) + * MPIDR[23:16] = AFF2_CLUSTERID + * MPIDR[24] = MT + * MPIDR[29:25] = RES0 + * MPIDR[30] = U + * MPIDR[31] = ME + * MPIDR[39:32] = AFF3 + * + * Linear Processor ID (LPID) calculation from MPIDR_EL1: + * (We only use AFF0_CPUID and AFF1_CLUSTERID for now + * until AFF2_CLUSTERID and AFF3 have non-zero values) + * + * LPID = MPIDR[15:8] | MPIDR[1:0] */ -#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) -#ifdef CONFIG_GICV2 - ldr x0, =GICC_BASE -#endif - bl gic_wait_for_interrupt -#endif - + mrs x0, mpidr_el1 + ubfm x1, x0, #8, #15 + ubfm x2, x0, #0, #1 + orr x10, x2, x1, lsl #2 /* x10 has LPID */ + ubfm x9, x0, #0, #15 /* x9 contains MPIDR[15:0] */ /* - * All processors will enter EL2 and optionally EL1. + * offset of the spin table element for this core from start of spin + * table (each elem is padded to 64 bytes) */ - bl armv8_switch_to_el2 + lsl x1, x10, #6 + ldr x0, =__spin_table + /* physical address of this cpus spin table element */ + add x11, x1, x0 + + str x9, [x11, #16] /* LPID */ + mov x4, #1 + str x4, [x11, #8] /* STATUS */ + dsb sy +#if defined(CONFIG_GICV3) + gic_wait_for_interrupt_m x0 +#elif defined(CONFIG_GICV2) + ldr x0, =GICC_BASE + gic_wait_for_interrupt_m x0, w1 +#endif + + bl secondary_switch_to_el2 #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - bl armv8_switch_to_el1 + bl secondary_switch_to_el1 #endif - b 2f -1: -2: - mov lr, x29 /* Restore LR */ - ret -ENDPROC(lowlevel_init) +slave_cpu: + wfe + ldr x0, [x11] + cbz x0, slave_cpu +#ifndef CONFIG_ARMV8_SWITCH_TO_EL1 + mrs x1, sctlr_el2 +#else + mrs x1, sctlr_el1 +#endif + tbz x1, #25, cpu_is_le + rev x0, x0 /* BE to LE conversion */ +cpu_is_le: + br x0 /* branch to the given address */ +ENDPROC(secondary_boot_func) + +ENTRY(secondary_switch_to_el2) + switch_el x0, 1f, 0f, 0f +0: ret +1: armv8_switch_to_el2_m x0 +ENDPROC(secondary_switch_to_el2) + +ENTRY(secondary_switch_to_el1) + switch_el x0, 0f, 1f, 0f +0: ret +1: armv8_switch_to_el1_m x0, x1 +ENDPROC(secondary_switch_to_el1) + + /* Ensure that the literals used by the secondary boot code are + * assembled within it (this is required so that we can protect + * this area with a single memreserve region + */ + .ltorg + + /* 64 bit alignment for elements accessed as data */ + .align 4 + .globl __secondary_boot_code_size + .type __secondary_boot_code_size, %object + /* Secondary Boot Code ends here */ +__secondary_boot_code_size: + .quad .-secondary_boot_code diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.c b/arch/arm/cpu/armv8/fsl-lsch3/mp.c new file mode 100644 index 0000000..94998bf --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.c @@ -0,0 +1,168 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/arch-fsl-lsch3/immap_lsch3.h> +#include "mp.h" + +DECLARE_GLOBAL_DATA_PTR; + +void *get_spin_tbl_addr(void) +{ + return &__spin_table; +} + +phys_addr_t determine_mp_bootpg(void) +{ + return (phys_addr_t)&secondary_boot_code; +} + +int fsl_lsch3_wake_seconday_cores(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR); + u32 cores, cpu_up_mask = 1; + int i, timeout = 10; + u64 *table = get_spin_tbl_addr(); + + cores = cpu_mask(); + /* Clear spin table so that secondary processors + * observe the correct value after waking up from wfe. + */ + memset(table, 0, CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE); + flush_dcache_range((unsigned long)table, + (unsigned long)table + + (CONFIG_MAX_CPUS*SPIN_TABLE_ELEM_SIZE)); + + printf("Waking secondary cores to start from %lx\n", gd->relocaddr); + out_le32(&gur->bootlocptrh, (u32)(gd->relocaddr >> 32)); + out_le32(&gur->bootlocptrl, (u32)gd->relocaddr); + out_le32(&gur->scratchrw[6], 1); + asm volatile("dsb st" : : : "memory"); + rst->brrl = cores; + asm volatile("dsb st" : : : "memory"); + + /* This is needed as a precautionary measure. + * If some code before this has accidentally released the secondary + * cores then the pre-bootloader code will trap them in a "wfe" unless + * the scratchrw[6] is set. In this case we need a sev here to get these + * cores moving again. + */ + asm volatile("sev"); + + while (timeout--) { + flush_dcache_range((unsigned long)table, (unsigned long)table + + CONFIG_MAX_CPUS * 64); + for (i = 1; i < CONFIG_MAX_CPUS; i++) { + if (table[i * WORDS_PER_SPIN_TABLE_ENTRY + + SPIN_TABLE_ELEM_STATUS_IDX]) + cpu_up_mask |= 1 << i; + } + if (hweight32(cpu_up_mask) == hweight32(cores)) + break; + udelay(10); + } + if (timeout <= 0) { + printf("Not all cores (0x%x) are up (0x%x)\n", + cores, cpu_up_mask); + return 1; + } + printf("All (%d) cores are up.\n", hweight32(cores)); + + return 0; +} + +int is_core_valid(unsigned int core) +{ + return !!((1 << core) & cpu_mask()); +} + +int cpu_reset(int nr) +{ + puts("Feature is not implemented.\n"); + + return 0; +} + +int cpu_disable(int nr) +{ + puts("Feature is not implemented.\n"); + + return 0; +} + +int core_to_pos(int nr) +{ + u32 cores = cpu_mask(); + int i, count = 0; + + if (nr == 0) { + return 0; + } else if (nr >= hweight32(cores)) { + puts("Not a valid core number.\n"); + return -1; + } + + for (i = 1; i < 32; i++) { + if (is_core_valid(i)) { + count++; + if (count == nr) + break; + } + } + + return count; +} + +int cpu_status(int nr) +{ + u64 *table; + int pos; + + if (nr == 0) { + table = (u64 *)get_spin_tbl_addr(); + printf("table base @ 0x%p\n", table); + } else { + pos = core_to_pos(nr); + if (pos < 0) + return -1; + table = (u64 *)get_spin_tbl_addr() + pos * + WORDS_PER_SPIN_TABLE_ENTRY; + printf("table @ 0x%p\n", table); + printf(" addr - 0x%016llx\n", + table[SPIN_TABLE_ELEM_ENTRY_ADDR_IDX]); + printf(" status - 0x%016llx\n", + table[SPIN_TABLE_ELEM_STATUS_IDX]); + printf(" lpid - 0x%016llx\n", + table[SPIN_TABLE_ELEM_LPID_IDX]); + } + + return 0; +} + +int cpu_release(int nr, int argc, char * const argv[]) +{ + u64 boot_addr; + u64 *table = (u64 *)get_spin_tbl_addr(); + int pos; + + pos = core_to_pos(nr); + if (pos <= 0) + return -1; + + table += pos * WORDS_PER_SPIN_TABLE_ENTRY; + boot_addr = simple_strtoull(argv[0], NULL, 16); + table[SPIN_TABLE_ELEM_ENTRY_ADDR_IDX] = boot_addr; + flush_dcache_range((unsigned long)table, + (unsigned long)table + SPIN_TABLE_ELEM_SIZE); + asm volatile("dsb st"); + smp_kick_all_cpus(); /* only those with entry addr set will run */ + + return 0; +} diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.h b/arch/arm/cpu/armv8/fsl-lsch3/mp.h new file mode 100644 index 0000000..06ac0bc --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.h @@ -0,0 +1,36 @@ +/* + * Copyright 2014, Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FSL_CH3_MP_H +#define _FSL_CH3_MP_H + +/* +* Each spin table element is defined as +* struct { +* uint64_t entry_addr; +* uint64_t status; +* uint64_t lpid; +* }; +* we pad this struct to 64 bytes so each entry is in its own cacheline +* the actual spin table is an array of these structures +*/ +#define SPIN_TABLE_ELEM_ENTRY_ADDR_IDX 0 +#define SPIN_TABLE_ELEM_STATUS_IDX 1 +#define SPIN_TABLE_ELEM_LPID_IDX 2 +#define WORDS_PER_SPIN_TABLE_ENTRY 8 /* pad to 64 bytes */ +#define SPIN_TABLE_ELEM_SIZE 64 + +#define id_to_core(x) ((x & 3) | (x >> 6)) +#ifndef __ASSEMBLY__ +extern u64 __spin_table[]; +extern u64 *secondary_boot_code; +extern size_t __secondary_boot_code_size; +int fsl_lsch3_wake_seconday_cores(void); +void *get_spin_tbl_addr(void); +phys_addr_t determine_mp_bootpg(void); +void secondary_boot_func(void); +#endif +#endif /* _FSL_CH3_MP_H */ diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S index 38dea5c..ade1cde 100644 --- a/arch/arm/cpu/armv8/transition.S +++ b/arch/arm/cpu/armv8/transition.S @@ -14,70 +14,11 @@ ENTRY(armv8_switch_to_el2) switch_el x0, 1f, 0f, 0f 0: ret -1: - mov x0, #0x5b1 /* Non-secure EL0/EL1 | HVC | 64bit EL2 */ - msr scr_el3, x0 - msr cptr_el3, xzr /* Disable coprocessor traps to EL3 */ - mov x0, #0x33ff - msr cptr_el2, x0 /* Disable coprocessor traps to EL2 */ - - /* Initialize SCTLR_EL2 */ - msr sctlr_el2, xzr - - /* Return to the EL2_SP2 mode from EL3 */ - mov x0, sp - msr sp_el2, x0 /* Migrate SP */ - mrs x0, vbar_el3 - msr vbar_el2, x0 /* Migrate VBAR */ - mov x0, #0x3c9 - msr spsr_el3, x0 /* EL2_SP2 | D | A | I | F */ - msr elr_el3, lr - eret +1: armv8_switch_to_el2_m x0 ENDPROC(armv8_switch_to_el2) ENTRY(armv8_switch_to_el1) switch_el x0, 0f, 1f, 0f 0: ret -1: - /* Initialize Generic Timers */ - mrs x0, cnthctl_el2 - orr x0, x0, #0x3 /* Enable EL1 access to timers */ - msr cnthctl_el2, x0 - msr cntvoff_el2, xzr - mrs x0, cntkctl_el1 - orr x0, x0, #0x3 /* Enable EL0 access to timers */ - msr cntkctl_el1, x0 - - /* Initilize MPID/MPIDR registers */ - mrs x0, midr_el1 - mrs x1, mpidr_el1 - msr vpidr_el2, x0 - msr vmpidr_el2, x1 - - /* Disable coprocessor traps */ - mov x0, #0x33ff - msr cptr_el2, x0 /* Disable coprocessor traps to EL2 */ - msr hstr_el2, xzr /* Disable coprocessor traps to EL2 */ - mov x0, #3 << 20 - msr cpacr_el1, x0 /* Enable FP/SIMD at EL1 */ - - /* Initialize HCR_EL2 */ - mov x0, #(1 << 31) /* 64bit EL1 */ - orr x0, x0, #(1 << 29) /* Disable HVC */ - msr hcr_el2, x0 - - /* SCTLR_EL1 initialization */ - mov x0, #0x0800 - movk x0, #0x30d0, lsl #16 - msr sctlr_el1, x0 - - /* Return to the EL1_SP1 mode from EL2 */ - mov x0, sp - msr sp_el1, x0 /* Migrate SP */ - mrs x0, vbar_el2 - msr vbar_el1, x0 /* Migrate VBAR */ - mov x0, #0x3c5 - msr spsr_el2, x0 /* EL1_SP1 | D | A | I | F */ - msr elr_el2, lr - eret +1: armv8_switch_to_el1_m x0, x1 ENDPROC(armv8_switch_to_el1) diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h index b17410a..da551e8 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/config.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h @@ -8,7 +8,7 @@ #define _ASM_ARMV8_FSL_LSCH3_CONFIG_ #include <fsl_ddrc_version.h> - +#define CONFIG_MP #define CONFIG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */ /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) @@ -16,8 +16,10 @@ #define CONFIG_SYS_IMMR 0x01000000 #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) #define CONFIG_SYS_FSL_DDR2_ADDR (CONFIG_SYS_IMMR + 0x00090000) +#define CONFIG_SYS_FSL_DDR3_ADDR 0x08210000 #define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00E00000) #define CONFIG_SYS_FSL_PMU_ADDR (CONFIG_SYS_IMMR + 0x00E30000) +#define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00E60000) #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR (CONFIG_SYS_IMMR + 0x00300000) #define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR (CONFIG_SYS_IMMR + 0x00310000) #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR (CONFIG_SYS_IMMR + 0x00370000) @@ -60,7 +62,7 @@ #ifdef CONFIG_LS2085A #define CONFIG_MAX_CPUS 16 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_NUM_DDR_CONTROLLERS 3 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 } #else #error SoC not defined diff --git a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h index 18e66bd..ee1d651 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h @@ -113,4 +113,39 @@ struct ccsr_clk_ctrl { u8 res_04[0x20-0x04]; } clkcncsr[8]; }; + +struct ccsr_reset { + u32 rstcr; /* 0x000 */ + u32 rstcrsp; /* 0x004 */ + u8 res_008[0x10-0x08]; /* 0x008 */ + u32 rstrqmr1; /* 0x010 */ + u32 rstrqmr2; /* 0x014 */ + u32 rstrqsr1; /* 0x018 */ + u32 rstrqsr2; /* 0x01c */ + u32 rstrqwdtmrl; /* 0x020 */ + u32 rstrqwdtmru; /* 0x024 */ + u8 res_028[0x30-0x28]; /* 0x028 */ + u32 rstrqwdtsrl; /* 0x030 */ + u32 rstrqwdtsru; /* 0x034 */ + u8 res_038[0x60-0x38]; /* 0x038 */ + u32 brrl; /* 0x060 */ + u32 brru; /* 0x064 */ + u8 res_068[0x80-0x68]; /* 0x068 */ + u32 pirset; /* 0x080 */ + u32 pirclr; /* 0x084 */ + u8 res_088[0x90-0x88]; /* 0x088 */ + u32 brcorenbr; /* 0x090 */ + u8 res_094[0x100-0x94]; /* 0x094 */ + u32 rcw_reqr; /* 0x100 */ + u32 rcw_completion; /* 0x104 */ + u8 res_108[0x110-0x108]; /* 0x108 */ + u32 pbi_reqr; /* 0x110 */ + u32 pbi_completion; /* 0x114 */ + u8 res_118[0xa00-0x118]; /* 0x118 */ + u32 qmbm_warmrst; /* 0xa00 */ + u32 soc_warmrst; /* 0xa04 */ + u8 res_a08[0xbf8-0xa08]; /* 0xa08 */ + u32 ip_rev1; /* 0xbf8 */ + u32 ip_rev2; /* 0xbfc */ +}; #endif /* __ARCH_FSL_LSCH3_IMMAP_H */ diff --git a/arch/arm/include/asm/arch-kirkwood/spi.h b/arch/arm/include/asm/arch-kirkwood/spi.h index b1cf614..e512dce 100644 --- a/arch/arm/include/asm/arch-kirkwood/spi.h +++ b/arch/arm/include/asm/arch-kirkwood/spi.h @@ -43,10 +43,10 @@ struct kwspi_registers { #define KWSPI_XFERLEN_2BYTE (1 << 5) #define KWSPI_XFERLEN_MASK (1 << 5) #define KWSPI_ADRLEN_1BYTE 0 -#define KWSPI_ADRLEN_2BYTE 1 << 8 -#define KWSPI_ADRLEN_3BYTE 2 << 8 -#define KWSPI_ADRLEN_4BYTE 3 << 8 -#define KWSPI_ADRLEN_MASK 3 << 8 +#define KWSPI_ADRLEN_2BYTE (1 << 8) +#define KWSPI_ADRLEN_3BYTE (2 << 8) +#define KWSPI_ADRLEN_4BYTE (3 << 8) +#define KWSPI_ADRLEN_MASK (3 << 8) #define KWSPI_TIMEOUT 10000 #endif /* __KW_SPI_H__ */ diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index ed78c33..a500b5b 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -50,7 +50,11 @@ #ifdef CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR_BE #define CONFIG_VERY_BIG_RAM +#ifdef CONFIG_SYS_FSL_DDR4 +#define CONFIG_SYS_FSL_DDRC_GEN4 +#else #define CONFIG_SYS_FSL_DDRC_ARM_GEN3 +#endif #define CONFIG_SYS_FSL_DDR #define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE @@ -71,6 +75,7 @@ #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-uniphier/arm-mpcore.h b/arch/arm/include/asm/arch-uniphier/arm-mpcore.h new file mode 100644 index 0000000..cf7cd46 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/arm-mpcore.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_ARM_MPCORE_H +#define ARCH_ARM_MPCORE_H + +/* Snoop Control Unit */ +#define SCU_OFFSET 0x00 + +/* SCU Control Register */ +#define SCU_CTRL 0x00 +/* SCU Configuration Register */ +#define SCU_CONF 0x04 +/* SCU CPU Power Status Register */ +#define SCU_PWR_STATUS 0x08 +/* SCU Invalidate All Registers in Secure State */ +#define SCU_INV_ALL 0x0C +/* SCU Filtering Start Address Register */ +#define SCU_FILTER_START 0x40 +/* SCU Filtering End Address Register */ +#define SCU_FILTER_END 0x44 +/* SCU Access Control Register */ +#define SCU_SAC 0x50 +/* SCU Non-secure Access Control Register */ +#define SCU_SNSAC 0x54 + +/* Global Timer */ +#define GLOBAL_TIMER_OFFSET 0x200 + +/* Global Timer Counter Registers */ +#define GTIMER_CNT_L 0x00 +#define GTIMER_CNT_H 0x04 +/* Global Timer Control Register */ +#define GTIMER_CTRL 0x08 +/* Global Timer Interrupt Status Register */ +#define GTIMER_STAT 0x0C +/* Comparator Value Registers */ +#define GTIMER_CMP_L 0x10 +#define GTIMER_CMP_H 0x14 +/* Auto-increment Register */ +#define GTIMER_INC 0x18 + +#endif /* ARCH_ARM_MPCORE_H */ diff --git a/arch/arm/include/asm/arch-uniphier/bcu-regs.h b/arch/arm/include/asm/arch-uniphier/bcu-regs.h new file mode 100644 index 0000000..0dfd94e --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/bcu-regs.h @@ -0,0 +1,30 @@ +/* + * UniPhier BCU (Bus Control Unit) registers + * + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_BCU_REGS_H +#define ARCH_BCU_REGS_H + +#define BCU_BASE 0x50080000 + +#define BCSCR(x) (BCU_BASE + 0x180 + (x) * 4) +#define BCSCR0 (BCSCR(0)) +#define BCSCR1 (BCSCR(1)) +#define BCSCR2 (BCSCR(2)) +#define BCSCR3 (BCSCR(3)) +#define BCSCR4 (BCSCR(4)) +#define BCSCR5 (BCSCR(5)) + +#define BCIPPCCHR(x) (BCU_BASE + 0x0280 + (x) * 4) +#define BCIPPCCHR0 (BCIPPCCHR(0)) +#define BCIPPCCHR1 (BCIPPCCHR(1)) +#define BCIPPCCHR2 (BCIPPCCHR(2)) +#define BCIPPCCHR3 (BCIPPCCHR(3)) +#define BCIPPCCHR4 (BCIPPCCHR(4)) +#define BCIPPCCHR5 (BCIPPCCHR(5)) + +#endif /* ARCH_BCU_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/board.h b/arch/arm/include/asm/arch-uniphier/board.h new file mode 100644 index 0000000..e6ba4e4 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/board.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_BOARD_H +#define ARCH_BOARD_H + +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \ + defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +void support_card_reset(void); +void support_card_init(void); +int check_support_card(void); +#else +#define support_card_reset() do {} while (0) +#define support_card_init() do {} while (0) +static inline int check_support_card(void) +{ + return 0; +} +#endif + +static inline void uniphier_board_reset(void) +{ + support_card_reset(); +} + +static inline void uniphier_board_init(void) +{ + support_card_init(); +} + +#endif /* ARCH_BOARD_H */ diff --git a/arch/arm/include/asm/arch-uniphier/boot-device.h b/arch/arm/include/asm/arch-uniphier/boot-device.h new file mode 100644 index 0000000..6987f57 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/boot-device.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2011-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_BOOT_DEVICE_H_ +#define _ASM_BOOT_DEVICE_H_ + +u32 get_boot_mode_sel(void); + +struct boot_device_info { + u32 type; + char *info; +}; + +extern struct boot_device_info boot_device_table[]; + +#endif /* _ASM_BOOT_DEVICE_H_ */ diff --git a/arch/arm/include/asm/arch-uniphier/led.h b/arch/arm/include/asm/arch-uniphier/led.h new file mode 100644 index 0000000..21277da --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/led.h @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_LED_H +#define ARCH_LED_H + +#include <config.h> + +#define LED_CHAR_0 0x7e +#define LED_CHAR_1 0x0c +#define LED_CHAR_2 0xb6 +#define LED_CHAR_3 0x9e +#define LED_CHAR_4 0xcc +#define LED_CHAR_5 0xda +#define LED_CHAR_6 0xfa +#define LED_CHAR_7 0x4e +#define LED_CHAR_8 0xfe +#define LED_CHAR_9 0xde + +#define LED_CHAR_A 0xee +#define LED_CHAR_B 0xf8 +#define LED_CHAR_C 0x72 +#define LED_CHAR_D 0xbc +#define LED_CHAR_E 0xf2 +#define LED_CHAR_F 0xe2 +#define LED_CHAR_G 0x7a +#define LED_CHAR_H 0xe8 +#define LED_CHAR_I 0x08 +#define LED_CHAR_J 0x3c +#define LED_CHAR_K 0xea +#define LED_CHAR_L 0x70 +#define LED_CHAR_M 0x6e +#define LED_CHAR_N 0xa8 +#define LED_CHAR_O 0xb8 +#define LED_CHAR_P 0xe6 +#define LED_CHAR_Q 0xce +#define LED_CHAR_R 0xa0 +#define LED_CHAR_S 0xc8 +#define LED_CHAR_T 0x8c +#define LED_CHAR_U 0x7c +#define LED_CHAR_V 0x54 +#define LED_CHAR_W 0xfc +#define LED_CHAR_X 0xec +#define LED_CHAR_Y 0xdc +#define LED_CHAR_Z 0xa4 + +#define LED_CHAR_SPACE 0x00 +#define LED_CHAR_DOT 0x01 + +#define LED_CHAR_ (LED_CHAR_SPACE) + +/** Macro to translate 4 characters into integer to display led */ +#define LED_C2I(C0, C1, C2, C3) \ + (~( \ + (LED_CHAR_##C0 << 24) | \ + (LED_CHAR_##C1 << 16) | \ + (LED_CHAR_##C2 << 8) | \ + (LED_CHAR_##C3) \ + )) + +#if defined(CONFIG_SUPPORT_CARD_LED_BASE) + +#define LED_ADDR CONFIG_SUPPORT_CARD_LED_BASE + +#ifdef __ASSEMBLY__ + +#define led_write(C0, C1, C2, C3) raw_led_write LED_C2I(C0, C1, C2, C3) +.macro raw_led_write data + ldr r0, =\data + ldr r1, =LED_ADDR + str r0, [r1] +.endm + +#else /* __ASSEMBLY__ */ + +#include <asm/io.h> + +#define led_write(C0, C1, C2, C3) \ +do { \ + raw_led_write(LED_C2I(C0, C1, C2, C3)); \ +} while (0) + +static inline void raw_led_write(u32 data) +{ + writel(data, LED_ADDR); +} + +#endif /* __ASSEMBLY__ */ + +#else /* CONFIG_SUPPORT_CARD_LED_BASE */ + +#define led_write(C0, C1, C2, C3) +#define raw_led_write(x) + +#endif /* CONFIG_SUPPORT_CARD_LED_BASE */ + +#endif /* ARCH_LED_H */ diff --git a/arch/arm/include/asm/arch-uniphier/sbc-regs.h b/arch/arm/include/asm/arch-uniphier/sbc-regs.h new file mode 100644 index 0000000..8e41078 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/sbc-regs.h @@ -0,0 +1,108 @@ +/* + * UniPhier SBC (System Bus Controller) registers + * + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_SBC_REGS_H +#define ARCH_SBC_REGS_H + +#define SBBASE_BASE 0x58c00100 +#define SBBASE(x) (SBBASE_BASE + (x) * 0x10) + +#define SBBASE0 (SBBASE(0)) +#define SBBASE1 (SBBASE(1)) +#define SBBASE2 (SBBASE(2)) +#define SBBASE3 (SBBASE(3)) +#define SBBASE4 (SBBASE(4)) +#define SBBASE5 (SBBASE(5)) +#define SBBASE6 (SBBASE(6)) +#define SBBASE7 (SBBASE(7)) + +#define SBBASE_BANK_ENABLE (0x00000001) + +#define SBCTRL_BASE 0x58c00200 +#define SBCTRL(x, y) (SBCTRL_BASE + (x) * 0x10 + (y) * 4) + +#define SBCTRL00 SBCTRL(0, 0) +#define SBCTRL01 SBCTRL(0, 1) +#define SBCTRL02 SBCTRL(0, 2) +#define SBCTRL03 SBCTRL(0, 3) +#define SBCTRL04 (SBCTRL_BASE + 0x100) + +#define SBCTRL10 SBCTRL(1, 0) +#define SBCTRL11 SBCTRL(1, 1) +#define SBCTRL12 SBCTRL(1, 2) +#define SBCTRL13 SBCTRL(1, 3) +#define SBCTRL14 (SBCTRL_BASE + 0x110) + +#define SBCTRL20 SBCTRL(2, 0) +#define SBCTRL21 SBCTRL(2, 1) +#define SBCTRL22 SBCTRL(2, 2) +#define SBCTRL23 SBCTRL(2, 3) +#define SBCTRL24 (SBCTRL_BASE + 0x120) + +#define SBCTRL30 SBCTRL(3, 0) +#define SBCTRL31 SBCTRL(3, 1) +#define SBCTRL32 SBCTRL(3, 2) +#define SBCTRL33 SBCTRL(3, 3) +#define SBCTRL34 (SBCTRL_BASE + 0x130) + +#define SBCTRL40 SBCTRL(4, 0) +#define SBCTRL41 SBCTRL(4, 1) +#define SBCTRL42 SBCTRL(4, 2) +#define SBCTRL43 SBCTRL(4, 3) +#define SBCTRL44 (SBCTRL_BASE + 0x140) + +#define SBCTRL50 SBCTRL(5, 0) +#define SBCTRL51 SBCTRL(5, 1) +#define SBCTRL52 SBCTRL(5, 2) +#define SBCTRL53 SBCTRL(5, 3) +#define SBCTRL54 (SBCTRL_BASE + 0x150) + +#define SBCTRL60 SBCTRL(6, 0) +#define SBCTRL61 SBCTRL(6, 1) +#define SBCTRL62 SBCTRL(6, 2) +#define SBCTRL63 SBCTRL(6, 3) +#define SBCTRL64 (SBCTRL_BASE + 0x160) + +#define SBCTRL70 SBCTRL(7, 0) +#define SBCTRL71 SBCTRL(7, 1) +#define SBCTRL72 SBCTRL(7, 2) +#define SBCTRL73 SBCTRL(7, 3) +#define SBCTRL74 (SBCTRL_BASE + 0x170) + +/* slower but LED works */ +#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000 +#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00 +#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009 +#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110 + +/* faster but LED does not work */ +#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000 +#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700 +/* NOR flash needs more wait counts than SRAM */ +#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009 +#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210 + +#define SBCTRL0_ADMULTIPLX_PERI_VALUE 0x33120000 +#define SBCTRL1_ADMULTIPLX_PERI_VALUE 0x03005500 +#define SBCTRL2_ADMULTIPLX_PERI_VALUE 0x14000020 + +#define SBCTRL0_ADMULTIPLX_MEM_VALUE 0x33120000 +#define SBCTRL1_ADMULTIPLX_MEM_VALUE 0x03005500 +#define SBCTRL2_ADMULTIPLX_MEM_VALUE 0x14000010 + +#define ROM_BOOT_ROMRSV2 0x59801208 + +#ifndef __ASSEMBLY__ +#include <asm/io.h> +static inline int boot_is_swapped(void) +{ + return !(readl(SBBASE0) & SBBASE_BANK_ENABLE); +} +#endif + +#endif /* ARCH_SBC_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/sc-regs.h b/arch/arm/include/asm/arch-uniphier/sc-regs.h new file mode 100644 index 0000000..1197bb5 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/sc-regs.h @@ -0,0 +1,62 @@ +/* + * UniPhier SC (System Control) block registers + * + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_SC_REGS_H +#define ARCH_SC_REGS_H + +#define SC_BASE_ADDR 0x61840000 + +#define SC_MPLLOSCCTL (SC_BASE_ADDR | 0x1184) +#define SC_MPLLOSCCTL_MPLLEN (0x1 << 0) +#define SC_MPLLOSCCTL_MPLLST (0x1 << 1) + +#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) +#define SC_DPLLCTRL_SSC_EN (0x1 << 31) +#define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16) +#define SC_DPLLCTRL_SSC_RATE (0x1 << 15) + +#define SC_DPLLCTRL2 (SC_BASE_ADDR | 0x1204) +#define SC_DPLLCTRL2_NRSTDS (0x1 << 28) + +#define SC_DPLLCTRL3 (SC_BASE_ADDR | 0x1208) +#define SC_DPLLCTRL3_LPFSEL_COEF2 (0x0 << 31) +#define SC_DPLLCTRL3_LPFSEL_COEF3 (0x1 << 31) + +#define SC_UPLLCTRL (SC_BASE_ADDR | 0x1210) + +#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1270) +#define SC_VPLL27ACTRL2 (SC_BASE_ADDR | 0x1274) +#define SC_VPLL27ACTRL3 (SC_BASE_ADDR | 0x1278) + +#define SC_VPLL27BCTRL (SC_BASE_ADDR | 0x1290) +#define SC_VPLL27BCTRL2 (SC_BASE_ADDR | 0x1294) +#define SC_VPLL27BCTRL3 (SC_BASE_ADDR | 0x1298) + +#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000) +#define SC_RSTCTRL_NRST_ETHER (0x1 << 12) +#define SC_RSTCTRL_NRST_UMC1 (0x1 << 5) +#define SC_RSTCTRL_NRST_UMC0 (0x1 << 4) +#define SC_RSTCTRL_NRST_NAND (0x1 << 2) + +#define SC_RSTCTRL2 (SC_BASE_ADDR | 0x2004) +#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) + +#define SC_CLKCTRL (SC_BASE_ADDR | 0x2104) +#define SC_CLKCTRL_CLK_ETHER (0x1 << 12) +#define SC_CLKCTRL_CLK_MIO (0x1 << 11) +#define SC_CLKCTRL_CLK_UMC (0x1 << 4) +#define SC_CLKCTRL_CLK_NAND (0x1 << 2) +#define SC_CLKCTRL_CLK_SBC (0x1 << 1) +#define SC_CLKCTRL_CLK_PERI (0x1 << 0) + +/* System reset control register */ +#define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000) +#define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010) +#define SC_SLFRSTCTL (SC_BASE_ADDR | 0x3014) + +#endif /* ARCH_SC_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/sg-regs.h b/arch/arm/include/asm/arch-uniphier/sg-regs.h new file mode 100644 index 0000000..79d7ec7 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/sg-regs.h @@ -0,0 +1,182 @@ +/* + * UniPhier SG (SoC Glue) block registers + * + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_SG_REGS_H +#define ARCH_SG_REGS_H + +/* Base Address */ +#define SG_CTRL_BASE 0x5f800000 +#define SG_DBG_BASE 0x5f900000 + +/* Revision */ +#define SG_REVISION (SG_CTRL_BASE | 0x0000) +#define SG_REVISION_TYPE_SHIFT 16 +#define SG_REVISION_TYPE_MASK (0xff << SG_REVISION_TYPE_SHIFT) +#define SG_REVISION_MODEL_SHIFT 8 +#define SG_REVISION_MODEL_MASK (0x3 << SG_REVISION_MODEL_SHIFT) +#define SG_REVISION_REV_SHIFT 0 +#define SG_REVISION_REV_MASK (0x1f << SG_REVISION_REV_SHIFT) + +/* Memory Configuration */ +#define SG_MEMCONF (SG_CTRL_BASE | 0x0400) + +#define SG_MEMCONF_CH0_SIZE_64MB ((0x0 << 10) | (0x01 << 0)) +#define SG_MEMCONF_CH0_SIZE_128MB ((0x0 << 10) | (0x02 << 0)) +#define SG_MEMCONF_CH0_SIZE_256MB ((0x0 << 10) | (0x03 << 0)) +#define SG_MEMCONF_CH0_SIZE_512MB ((0x1 << 10) | (0x00 << 0)) +#define SG_MEMCONF_CH0_SIZE_1024MB ((0x1 << 10) | (0x01 << 0)) +#define SG_MEMCONF_CH0_NUM_1 (0x1 << 8) +#define SG_MEMCONF_CH0_NUM_2 (0x0 << 8) + +#define SG_MEMCONF_CH1_SIZE_64MB ((0x0 << 11) | (0x01 << 2)) +#define SG_MEMCONF_CH1_SIZE_128MB ((0x0 << 11) | (0x02 << 2)) +#define SG_MEMCONF_CH1_SIZE_256MB ((0x0 << 11) | (0x03 << 2)) +#define SG_MEMCONF_CH1_SIZE_512MB ((0x1 << 11) | (0x00 << 2)) +#define SG_MEMCONF_CH1_SIZE_1024MB ((0x1 << 11) | (0x01 << 2)) +#define SG_MEMCONF_CH1_NUM_1 (0x1 << 9) +#define SG_MEMCONF_CH1_NUM_2 (0x0 << 9) + +#define SG_MEMCONF_SPARSEMEM (0x1 << 4) + +/* Pin Control */ +#define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000) + +#if defined(CONFIG_MACH_PH1_PRO4) +# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8) +#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4) +#endif + +#if defined(CONFIG_MACH_PH1_PRO4) +#define SG_PINSELBITS 4 +#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#define SG_PINSELBITS 8 +#endif + +#define SG_PINSEL_ADDR(n) (SG_PINCTRL((n) * (SG_PINSELBITS) / 32)) +#define SG_PINSEL_MASK(n) (~(((1 << (SG_PINSELBITS)) - 1) << \ + ((n) * (SG_PINSELBITS) % 32))) +#define SG_PINSEL_MODE(n, mode) ((mode) << ((n) * (SG_PINSELBITS) % 32)) + +/* Only for PH1-Pro4 */ +#define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700) + +/* Input Enable */ +#define SG_IECTRL (SG_CTRL_BASE | 0x1d00) + +/* Pin Monitor */ +#define SG_PINMON0 (SG_DBG_BASE | 0x0100) + +#define SG_PINMON0_CLK_MODE_UPLLSRC_MASK (0x3 << 19) +#define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT (0x0 << 19) +#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27A (0x2 << 19) +#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27B (0x3 << 19) + +#define SG_PINMON0_CLK_MODE_AXOSEL_MASK (0x3 << 16) +#define SG_PINMON0_CLK_MODE_AXOSEL_24576KHZ (0x0 << 16) +#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ (0x1 << 16) +#define SG_PINMON0_CLK_MODE_AXOSEL_6144KHZ (0x2 << 16) +#define SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ (0x3 << 16) + +#define SG_PINMON0_CLK_MODE_AXOSEL_DEFAULT (0x0 << 16) +#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U (0x1 << 16) +#define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16) +#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16) + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#include <asm/io.h> + +static inline void sg_set_pinsel(int n, int value) +{ + writel((readl(SG_PINSEL_ADDR(n)) & SG_PINSEL_MASK(n)) + | SG_PINSEL_MODE(n, value), SG_PINSEL_ADDR(n)); +} + +static inline u32 sg_memconf_val_ch0(unsigned long size, int num) +{ + int size_mb = (size >> 20) / num; + u32 ret; + + switch (size_mb) { + case 64: + ret = SG_MEMCONF_CH0_SIZE_64MB; + break; + case 128: + ret = SG_MEMCONF_CH0_SIZE_128MB; + break; + case 256: + ret = SG_MEMCONF_CH0_SIZE_256MB; + break; + case 512: + ret = SG_MEMCONF_CH0_SIZE_512MB; + break; + case 1024: + ret = SG_MEMCONF_CH0_SIZE_1024MB; + break; + default: + BUG(); + break; + } + + switch (num) { + case 1: + ret |= SG_MEMCONF_CH0_NUM_1; + break; + case 2: + ret |= SG_MEMCONF_CH0_NUM_2; + break; + default: + BUG(); + break; + } + return ret; +} + +static inline u32 sg_memconf_val_ch1(unsigned long size, int num) +{ + int size_mb = (size >> 20) / num; + u32 ret; + + switch (size_mb) { + case 64: + ret = SG_MEMCONF_CH1_SIZE_64MB; + break; + case 128: + ret = SG_MEMCONF_CH1_SIZE_128MB; + break; + case 256: + ret = SG_MEMCONF_CH1_SIZE_256MB; + break; + case 512: + ret = SG_MEMCONF_CH1_SIZE_512MB; + break; + case 1024: + ret = SG_MEMCONF_CH1_SIZE_1024MB; + break; + default: + BUG(); + break; + } + + switch (num) { + case 1: + ret |= SG_MEMCONF_CH1_NUM_1; + break; + case 2: + ret |= SG_MEMCONF_CH1_NUM_2; + break; + default: + BUG(); + break; + } + return ret; +} +#endif /* __ASSEMBLY__ */ + +#endif /* ARCH_SG_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/ssc-regs.h b/arch/arm/include/asm/arch-uniphier/ssc-regs.h new file mode 100644 index 0000000..77b3470 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/ssc-regs.h @@ -0,0 +1,67 @@ +/* + * UniPhier System Cache (L2 Cache) registers + * + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_SSC_REGS_H +#define ARCH_SSC_REGS_H + +#define SSCC 0x500c0000 +#define SSCC_BST (0x1 << 20) +#define SSCC_ACT (0x1 << 19) +#define SSCC_WTG (0x1 << 18) +#define SSCC_PRD (0x1 << 17) +#define SSCC_WBWA (0x1 << 16) +#define SSCC_EX (0x1 << 13) +#define SSCC_ON (0x1 << 0) + +#define SSCLPDAWCR 0x500c0030 + +#define SSCOPE 0x506c0244 +#define SSCOPE_CM_SYNC 0x00000008 + +#define SSCOQM 0x506c0248 +#define SSCOQM_TID_MASK (0x3 << 21) +#define SSCOQM_TID_BY_WAY (0x2 << 21) +#define SSCOQM_TID_BY_INST_WAY (0x1 << 21) +#define SSCOQM_TID_BY_DATA_WAY (0x0 << 21) +#define SSCOQM_S_MASK (0x3 << 17) +#define SSCOQM_S_WAY (0x2 << 17) +#define SSCOQM_S_ALL (0x1 << 17) +#define SSCOQM_S_ADDRESS (0x0 << 17) +#define SSCOQM_CE (0x1 << 15) +#define SSCOQM_CW (0x1 << 14) +#define SSCOQM_CM_MASK (0x7) +#define SSCOQM_CM_DIRT_TOUCH (0x7) +#define SSCOQM_CM_ZERO_TOUCH (0x6) +#define SSCOQM_CM_NORM_TOUCH (0x5) +#define SSCOQM_CM_PREF_FETCH (0x4) +#define SSCOQM_CM_SSC_FETCH (0x3) +#define SSCOQM_CM_WB_INV (0x2) +#define SSCOQM_CM_WB (0x1) +#define SSCOQM_CM_INV (0x0) + +#define SSCOQAD 0x506c024c +#define SSCOQSZ 0x506c0250 +#define SSCOQWN 0x506c0258 + +#define SSCOPPQSEF 0x506c025c +#define SSCOPPQSEF_FE (0x1 << 1) +#define SSCOPPQSEF_OE (0x1 << 0) + +#define SSCOLPQS 0x506c0260 +#define SSCOLPQS_EF (0x1 << 2) +#define SSCOLPQS_EST (0x1 << 1) +#define SSCOLPQS_QST (0x1 << 0) + +#define SSCOQCE0 0x506c0270 + +#define SSC_LINE_SIZE 128 +#define SSC_NUM_ENTRIES 256 +#define SSC_WAY_SIZE ((SSC_LINE_SIZE) * (SSC_NUM_ENTRIES)) +#define SSC_RANGE_OP_MAX_SIZE (0x00400000 - (SSC_LINE_SIZE)) + +#endif /* ARCH_SSC_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/umc-regs.h b/arch/arm/include/asm/arch-uniphier/umc-regs.h new file mode 100644 index 0000000..6159281 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/umc-regs.h @@ -0,0 +1,119 @@ +/* + * UniPhier UMC (Universal Memory Controller) registers + * + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_UMC_REGS_H +#define ARCH_UMC_REGS_H + +#define UMC_BASE 0x5b800000 + +/* SSIF registers */ +#define UMC_SSIF_BASE UMC_BASE + +#define UMC_CPURST 0x00000700 +#define UMC_IDSRST 0x0000070C +#define UMC_IXMRST 0x00000714 +#define UMC_HDMRST 0x00000718 +#define UMC_MDMRST 0x0000071C +#define UMC_HDDRST 0x00000720 +#define UMC_MDDRST 0x00000724 +#define UMC_SIORST 0x00000728 +#define UMC_GIORST 0x0000072C +#define UMC_HD2RST 0x00000734 +#define UMC_VIORST 0x0000073C +#define UMC_FRCRST 0x00000748 /* LD4/sLD8 */ +#define UMC_DVCRST 0x00000748 /* Pro4 */ +#define UMC_RGLRST 0x00000750 +#define UMC_VPERST 0x00000758 +#define UMC_AIORST 0x00000764 +#define UMC_DMDRST 0x00000770 + +#define UMC_HDMCHSEL 0x00000898 +#define UMC_MDMCHSEL 0x0000089C +#define UMC_DVCCHSEL 0x000008C8 +#define UMC_DMDCHSEL 0x000008F0 + +#define UMC_CLKEN_SSIF_FETCH 0x0000C060 +#define UMC_CLKEN_SSIF_COMQUE0 0x0000C064 +#define UMC_CLKEN_SSIF_COMWC0 0x0000C068 +#define UMC_CLKEN_SSIF_COMRC0 0x0000C06C +#define UMC_CLKEN_SSIF_COMQUE1 0x0000C070 +#define UMC_CLKEN_SSIF_COMWC1 0x0000C074 +#define UMC_CLKEN_SSIF_COMRC1 0x0000C078 +#define UMC_CLKEN_SSIF_WC 0x0000C07C +#define UMC_CLKEN_SSIF_RC 0x0000C080 +#define UMC_CLKEN_SSIF_DST 0x0000C084 + +/* CA registers */ +#define UMC_CA_BASE(ch) (UMC_BASE + 0x00001000 + 0x00001000 * (ch)) + +/* DRAM controller registers */ +#define UMC_DRAMCONT_BASE(ch) (UMC_BASE + 0x00400000 + 0x00200000 * (ch)) + +#define UMC_CMDCTLA 0x00000000 +#define UMC_CMDCTLB 0x00000004 +#define UMC_INITCTLA 0x00000008 +#define UMC_INITCTLB 0x0000000C +#define UMC_INITCTLC 0x00000010 +#define UMC_INITSET 0x00000014 +#define UMC_INITSTAT 0x00000018 +#define UMC_DRMMR0 0x0000001C +#define UMC_DRMMR1 0x00000020 +#define UMC_DRMMR2 0x00000024 +#define UMC_DRMMR3 0x00000028 +#define UMC_SPCCTLA 0x00000030 +#define UMC_SPCCTLB 0x00000034 +#define UMC_SPCSETA 0x00000038 +#define UMC_SPCSETB 0x0000003C +#define UMC_SPCSETC 0x00000040 +#define UMC_SPCSETD 0x00000044 +#define UMC_SPCSTATA 0x00000050 +#define UMC_SPCSTATB 0x00000054 +#define UMC_SPCSTATC 0x00000058 +#define UMC_ACSSETA 0x00000060 +#define UMC_FLOWCTLA 0x00000400 +#define UMC_FLOWCTLB 0x00000404 +#define UMC_FLOWCTLC 0x00000408 +#define UMC_FLOWCTLG 0x00000508 +#define UMC_RDATACTL_D0 0x00000600 +#define UMC_WDATACTL_D0 0x00000604 +#define UMC_RDATACTL_D1 0x00000608 +#define UMC_WDATACTL_D1 0x0000060C +#define UMC_DATASET 0x00000610 +#define UMC_DCCGCTL 0x00000720 +#define UMC_DICGCTLA 0x00000724 +#define UMC_DICGCTLB 0x00000728 +#define UMC_DIOCTLA 0x00000C00 +#define UMC_DFICUPDCTLA 0x00000C20 + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +static inline void umc_polling(u32 address, u32 expval, u32 mask) +{ + u32 nmask = ~mask; + u32 data; + do { + data = readl(address) & nmask; + } while (data != expval); +} + +static inline void umc_dram_init_start(void __iomem *dramcont) +{ + writel(0x00000002, dramcont + UMC_INITSET); +} + +static inline void umc_dram_init_poll(void __iomem *dramcont) +{ + while ((readl(dramcont + UMC_INITSTAT) & 0x00000002)) + ; +} + +#endif + +#endif diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h index bb00217..9d797db 100644 --- a/arch/arm/include/asm/arch-vf610/imx-regs.h +++ b/arch/arm/include/asm/arch-vf610/imx-regs.h @@ -103,9 +103,11 @@ /* DDRMC */ #define DDRMC_PHY_DQ_TIMING 0x00002613 #define DDRMC_PHY_DQS_TIMING 0x00002615 -#define DDRMC_PHY_CTRL 0x01210080 +#define DDRMC_PHY_CTRL 0x00210000 #define DDRMC_PHY_MASTER_CTRL 0x0001012a -#define DDRMC_PHY_SLAVE_CTRL 0x00012020 +#define DDRMC_PHY_SLAVE_CTRL 0x00002000 +#define DDRMC_PHY_OFF 0x00000000 +#define DDRMC_PHY_PROC_PAD_ODT 0x00010101 #define DDRMC_PHY50_DDR3_MODE (1 << 12) #define DDRMC_PHY50_EN_SW_HALF_CYCLE (1 << 8) @@ -138,7 +140,7 @@ #define DDRMC_CR21_CCMAP_EN 1 #define DDRMC_CR22_TDAL(v) (((v) & 0x3f) << 16) #define DDRMC_CR23_BSTLEN(v) (((v) & 0x7) << 24) -#define DDRMC_CR23_TDLL(v) ((v) & 0xff) +#define DDRMC_CR23_TDLL(v) ((v) & 0xffff) #define DDRMC_CR24_TRP_AB(v) ((v) & 0x1f) #define DDRMC_CR25_TREF_EN (1 << 16) #define DDRMC_CR26_TREF(v) (((v) & 0xffff) << 16) @@ -151,7 +153,7 @@ #define DDRMC_CR33_EN_QK_SREF (1 << 16) #define DDRMC_CR34_CKSRX(v) (((v) & 0xf) << 16) #define DDRMC_CR34_CKSRE(v) (((v) & 0xf) << 8) -#define DDRMC_CR38_FREQ_CHG_EN (1 << 8) +#define DDRMC_CR38_FREQ_CHG_EN(v) (((v) & 0x1) << 8) #define DDRMC_CR39_PHY_INI_COM(v) (((v) & 0xffff) << 16) #define DDRMC_CR39_PHY_INI_STA(v) (((v) & 0xff) << 8) #define DDRMC_CR39_FRQ_CH_DLLOFF(v) ((v) & 0x3) @@ -163,7 +165,7 @@ #define DDRMC_CR67_ZQCS(v) ((v) & 0xfff) #define DDRMC_CR69_ZQ_ON_SREF_EX(v) (((v) & 0xf) << 8) #define DDRMC_CR70_REF_PER_ZQ(v) (v) -#define DDRMC_CR72_ZQCS_ROTATE (1 << 24) +#define DDRMC_CR72_ZQCS_ROTATE(v) (((v) & 0x1) << 24) #define DDRMC_CR73_APREBIT(v) (((v) & 0xf) << 24) #define DDRMC_CR73_COL_DIFF(v) (((v) & 0x7) << 16) #define DDRMC_CR73_ROW_DIFF(v) (((v) & 0x3) << 8) @@ -182,9 +184,10 @@ #define DDRMC_CR77_CS_MAP (1 << 24) #define DDRMC_CR77_DI_RD_INTLEAVE (1 << 8) #define DDRMC_CR77_SWAP_EN 1 +#define DDRMC_CR78_Q_FULLNESS(v) (((v) & 0x7) << 24) #define DDRMC_CR78_BUR_ON_FLY_BIT(v) ((v) & 0xf) -#define DDRMC_CR79_CTLUPD_AREF (1 << 24) -#define DDRMC_CR82_INT_MASK 0x1fffffff +#define DDRMC_CR79_CTLUPD_AREF(v) (((v) & 0x1) << 24) +#define DDRMC_CR82_INT_MASK 0x10000000 #define DDRMC_CR87_ODT_WR_MAPCS0 (1 << 24) #define DDRMC_CR87_ODT_RD_MAPCS0 (1 << 16) #define DDRMC_CR88_TODTL_CMD(v) (((v) & 0x1f) << 16) @@ -192,9 +195,17 @@ #define DDRMC_CR91_R2W_SMCSDL(v) (((v) & 0x7) << 16) #define DDRMC_CR96_WLMRD(v) (((v) & 0x3f) << 8) #define DDRMC_CR96_WLDQSEN(v) ((v) & 0x3f) +#define DDRMC_CR97_WRLVL_EN (1 << 24) +#define DDRMC_CR98_WRLVL_DL_0 (0) +#define DDRMC_CR99_WRLVL_DL_1 (0) +#define DDRMC_CR102_RDLVL_GT_REGEN (1 << 16) +#define DDRMC_CR102_RDLVL_REG_EN (1 << 8) #define DDRMC_CR105_RDLVL_DL_0(v) (((v) & 0xff) << 8) +#define DDRMC_CR106_RDLVL_GTDL_0(v) ((v) & 0xff) #define DDRMC_CR110_RDLVL_DL_1(v) ((v) & 0xff) +#define DDRMC_CR110_RDLVL_GTDL_1(v) (((v) & 0xff) << 16) #define DDRMC_CR114_RDLVL_GTDL_2(v) (((v) & 0xffff) << 8) +#define DDRMC_CR115_RDLVL_GTDL_2(v) ((v) & 0xff) #define DDRMC_CR117_AXI0_W_PRI(v) (((v) & 0x3) << 8) #define DDRMC_CR117_AXI0_R_PRI(v) ((v) & 0x3) #define DDRMC_CR118_AXI1_W_PRI(v) (((v) & 0x3) << 24) @@ -208,20 +219,42 @@ #define DDRMC_CR122_AXI0_PRIRLX(v) ((v) & 0x3ff) #define DDRMC_CR123_AXI1_PRI3_RPRI(v) (((v) & 0xf) << 8) #define DDRMC_CR123_AXI1_PRI2_RPRI(v) ((v) & 0xf) +#define DDRMC_CR123_AXI1_P_ODR_EN (1 << 16) #define DDRMC_CR124_AXI1_PRIRLX(v) ((v) & 0x3ff) #define DDRMC_CR126_PHY_RDLAT(v) (((v) & 0x3f) << 8) #define DDRMC_CR132_WRLAT_ADJ(v) (((v) & 0x1f) << 8) #define DDRMC_CR132_RDLAT_ADJ(v) ((v) & 0x3f) +#define DDRMC_CR137_PHYCTL_DL(v) (((v) & 0xf) << 16) +#define DDRMC_CR138_PHY_WRLV_MXDL(v) (((v) & 0xffff) << 16) +#define DDRMC_CR138_PHYDRAM_CK_EN(v) (((v) & 0x8) << 8) #define DDRMC_CR139_PHY_WRLV_RESPLAT(v) (((v) & 0xff) << 24) #define DDRMC_CR139_PHY_WRLV_LOAD(v) (((v) & 0xff) << 16) #define DDRMC_CR139_PHY_WRLV_DLL(v) (((v) & 0xff) << 8) #define DDRMC_CR139_PHY_WRLV_EN(v) ((v) & 0xff) +#define DDRMC_CR140_PHY_WRLV_WW(v) ((v) & 0x3ff) +#define DDRMC_CR143_RDLV_GAT_MXDL(v) (((v) & 0xffff) << 16) +#define DDRMC_CR143_RDLV_MXDL(v) ((v) & 0xffff) +#define DDRMC_CR144_PHY_RDLVL_RES(v) (((v) & 0xff) << 24) +#define DDRMC_CR144_PHY_RDLV_LOAD(v) (((v) & 0xff) << 16) +#define DDRMC_CR144_PHY_RDLV_DLL(v) (((v) & 0xff) << 8) +#define DDRMC_CR144_PHY_RDLV_EN(v) ((v) & 0xff) +#define DDRMC_CR145_PHY_RDLV_RR(v) ((v) & 0x3ff) +#define DDRMC_CR146_PHY_RDLVL_RESP(v) (v) +#define DDRMC_CR147_RDLV_RESP_MASK(v) ((v) & 0xfffff) +#define DDRMC_CR148_RDLV_GATE_RESP_MASK(v) ((v) & 0xfffff) +#define DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(v) (((v) & 0xf) << 8) +#define DDRMC_CR151_RDLVL_DQ_ZERO_CNT(v) ((v) & 0xf) #define DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(v) (((v) & 0x1f) << 27) #define DDRMC_CR154_PAD_ZQ_MODE(v) (((v) & 0x3) << 21) #define DDRMC_CR154_DDR_SEL_PAD_CONTR(v) (((v) & 0x3) << 18) +#define DDRMC_CR154_PAD_ZQ_HW_FOR(v) (((v) & 0x1) << 14) #define DDRMC_CR155_AXI0_AWCACHE (1 << 10) -#define DDRMC_CR155_PAD_ODT_BYTE1(v) ((v) & 0x7) +#define DDRMC_CR155_PAD_ODT_BYTE1(v) (((v) & 0x7) << 3) +#define DDRMC_CR155_PAD_ODT_BYTE0(v) ((v) & 0x7) #define DDRMC_CR158_TWR(v) ((v) & 0x3f) +#define DDRMC_CR161_ODT_EN(v) (((v) & 0x1) << 16) +#define DDRMC_CR161_TODTH_RD(v) (((v) & 0xf) << 8) +#define DDRMC_CR161_TODTH_WR(v) ((v) & 0xf) #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h index 7464da8..9226e69 100644 --- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h +++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h @@ -17,6 +17,8 @@ #define VF610_ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \ PAD_CTL_OBE_IBE_ENABLE) #define VF610_DDR_PAD_CTRL PAD_CTL_DSE_25ohm +#define VF610_DDR_PAD_CTRL_1 (PAD_CTL_DSE_25ohm | \ + PAD_CTL_INPUT_DIFFERENTIAL) #define VF610_I2C_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \ PAD_CTL_SPEED_HIGH | PAD_CTL_OBE_IBE_ENABLE) #define VF610_NFC_IO_PAD_CTRL (PAD_CTL_SPEED_MED | PAD_CTL_SRE | \ @@ -102,6 +104,7 @@ enum { VF610_PAD_PTC28__NF_CLE = IOMUX_PAD(0x0194, 0x0194, 6, __NA_, 0, VF610_NFC_CN_PAD_CTRL), + VF610_PAD_DDR_RESETB = IOMUX_PAD(0x021c, 0x021c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_A15__DDR_A_15 = IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_A14__DDR_A_14 = IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_A13__DDR_A_13 = IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL), @@ -117,6 +120,7 @@ enum { VF610_PAD_DDR_A3__DDR_A_3 = IOMUX_PAD(0x0250, 0x0250, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_A2__DDR_A_2 = IOMUX_PAD(0x0254, 0x0254, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_A1__DDR_A_1 = IOMUX_PAD(0x0258, 0x0258, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A0__DDR_A_0 = IOMUX_PAD(0x025c, 0x025c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_BA2__DDR_BA_2 = IOMUX_PAD(0x0260, 0x0260, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_BA1__DDR_BA_1 = IOMUX_PAD(0x0264, 0x0264, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_BA0__DDR_BA_0 = IOMUX_PAD(0x0268, 0x0268, 0, __NA_, 0, VF610_DDR_PAD_CTRL), @@ -124,26 +128,26 @@ enum { VF610_PAD_DDR_CKE__DDR_CKE_0 = IOMUX_PAD(0x0270, 0x0270, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_CLK__DDR_CLK_0 = IOMUX_PAD(0x0274, 0x0274, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_CS__DDR_CS_B_0 = IOMUX_PAD(0x0278, 0x0278, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D15__DDR_D_15 = IOMUX_PAD(0x027c, 0x027c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D14__DDR_D_14 = IOMUX_PAD(0x0280, 0x0280, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D13__DDR_D_13 = IOMUX_PAD(0x0284, 0x0284, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D12__DDR_D_12 = IOMUX_PAD(0x0288, 0x0288, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D11__DDR_D_11 = IOMUX_PAD(0x028c, 0x028c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D10__DDR_D_10 = IOMUX_PAD(0x0290, 0x0290, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D9__DDR_D_9 = IOMUX_PAD(0x0294, 0x0294, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D8__DDR_D_8 = IOMUX_PAD(0x0298, 0x0298, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D7__DDR_D_7 = IOMUX_PAD(0x029c, 0x029c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D6__DDR_D_6 = IOMUX_PAD(0x02a0, 0x02a0, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D5__DDR_D_5 = IOMUX_PAD(0x02a4, 0x02a4, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D4__DDR_D_4 = IOMUX_PAD(0x02a8, 0x02a8, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D3__DDR_D_3 = IOMUX_PAD(0x02ac, 0x02ac, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D2__DDR_D_2 = IOMUX_PAD(0x02b0, 0x02b0, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D1__DDR_D_1 = IOMUX_PAD(0x02b4, 0x02b4, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_D0__DDR_D_0 = IOMUX_PAD(0x02b8, 0x02b8, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_DQM1__DDR_DQM_1 = IOMUX_PAD(0x02bc, 0x02bc, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_DQM0__DDR_DQM_0 = IOMUX_PAD(0x02c0, 0x02c0, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_DQS1__DDR_DQS_1 = IOMUX_PAD(0x02c4, 0x02c4, 0, __NA_, 0, VF610_DDR_PAD_CTRL), - VF610_PAD_DDR_DQS0__DDR_DQS_0 = IOMUX_PAD(0x02c8, 0x02c8, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D15__DDR_D_15 = IOMUX_PAD(0x027c, 0x027c, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D14__DDR_D_14 = IOMUX_PAD(0x0280, 0x0280, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D13__DDR_D_13 = IOMUX_PAD(0x0284, 0x0284, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D12__DDR_D_12 = IOMUX_PAD(0x0288, 0x0288, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D11__DDR_D_11 = IOMUX_PAD(0x028c, 0x028c, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D10__DDR_D_10 = IOMUX_PAD(0x0290, 0x0290, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D9__DDR_D_9 = IOMUX_PAD(0x0294, 0x0294, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D8__DDR_D_8 = IOMUX_PAD(0x0298, 0x0298, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D7__DDR_D_7 = IOMUX_PAD(0x029c, 0x029c, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D6__DDR_D_6 = IOMUX_PAD(0x02a0, 0x02a0, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D5__DDR_D_5 = IOMUX_PAD(0x02a4, 0x02a4, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D4__DDR_D_4 = IOMUX_PAD(0x02a8, 0x02a8, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D3__DDR_D_3 = IOMUX_PAD(0x02ac, 0x02ac, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D2__DDR_D_2 = IOMUX_PAD(0x02b0, 0x02b0, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D1__DDR_D_1 = IOMUX_PAD(0x02b4, 0x02b4, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_D0__DDR_D_0 = IOMUX_PAD(0x02b8, 0x02b8, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_DQM1__DDR_DQM_1 = IOMUX_PAD(0x02bc, 0x02bc, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_DQM0__DDR_DQM_0 = IOMUX_PAD(0x02c0, 0x02c0, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_DQS1__DDR_DQS_1 = IOMUX_PAD(0x02c4, 0x02c4, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), + VF610_PAD_DDR_DQS0__DDR_DQS_0 = IOMUX_PAD(0x02c8, 0x02c8, 0, __NA_, 0, VF610_DDR_PAD_CTRL_1), VF610_PAD_DDR_RAS__DDR_RAS_B = IOMUX_PAD(0x02cc, 0x02cc, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_WE__DDR_WE_B = IOMUX_PAD(0x02d0, 0x02d0, 0, __NA_, 0, VF610_DDR_PAD_CTRL), VF610_PAD_DDR_ODT1__DDR_ODT_0 = IOMUX_PAD(0x02d4, 0x02d4, 0, __NA_, 0, VF610_DDR_PAD_CTRL), diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 70ee86c..a8ca49c 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -120,6 +120,8 @@ typedef u64 iomux_v3_cfg_t; #define PAD_MUX_MODE_SHIFT 20 +#define PAD_CTL_INPUT_DIFFERENTIAL (1 << 16) + #define PAD_CTL_SPEED_MED (1 << 12) #define PAD_CTL_SPEED_HIGH (3 << 12) diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h index f77e4b8..541b443 100644 --- a/arch/arm/include/asm/macro.h +++ b/arch/arm/include/asm/macro.h @@ -105,6 +105,99 @@ lr .req x30 cbz \xreg1, \master_label .endm +.macro armv8_switch_to_el2_m, xreg1 + /* 64bit EL2 | HCE | SMD | RES1 (Bits[5:4]) | Non-secure EL0/EL1 */ + mov \xreg1, #0x5b1 + msr scr_el3, \xreg1 + msr cptr_el3, xzr /* Disable coprocessor traps to EL3 */ + mov \xreg1, #0x33ff + msr cptr_el2, \xreg1 /* Disable coprocessor traps to EL2 */ + + /* Initialize SCTLR_EL2 + * + * setting RES1 bits (29,28,23,22,18,16,11,5,4) to 1 + * and RES0 bits (31,30,27,26,24,21,20,17,15-13,10-6) + + * EE,WXN,I,SA,C,A,M to 0 + */ + mov \xreg1, #0x0830 + movk \xreg1, #0x30C5, lsl #16 + msr sctlr_el2, \xreg1 + + /* Return to the EL2_SP2 mode from EL3 */ + mov \xreg1, sp + msr sp_el2, \xreg1 /* Migrate SP */ + mrs \xreg1, vbar_el3 + msr vbar_el2, \xreg1 /* Migrate VBAR */ + mov \xreg1, #0x3c9 + msr spsr_el3, \xreg1 /* EL2_SP2 | D | A | I | F */ + msr elr_el3, lr + eret +.endm + +.macro armv8_switch_to_el1_m, xreg1, xreg2 + /* Initialize Generic Timers */ + mrs \xreg1, cnthctl_el2 + orr \xreg1, \xreg1, #0x3 /* Enable EL1 access to timers */ + msr cnthctl_el2, \xreg1 + msr cntvoff_el2, xzr + + /* Initilize MPID/MPIDR registers */ + mrs \xreg1, midr_el1 + mrs \xreg2, mpidr_el1 + msr vpidr_el2, \xreg1 + msr vmpidr_el2, \xreg2 + + /* Disable coprocessor traps */ + mov \xreg1, #0x33ff + msr cptr_el2, \xreg1 /* Disable coprocessor traps to EL2 */ + msr hstr_el2, xzr /* Disable coprocessor traps to EL2 */ + mov \xreg1, #3 << 20 + msr cpacr_el1, \xreg1 /* Enable FP/SIMD at EL1 */ + + /* Initialize HCR_EL2 */ + mov \xreg1, #(1 << 31) /* 64bit EL1 */ + orr \xreg1, \xreg1, #(1 << 29) /* Disable HVC */ + msr hcr_el2, \xreg1 + + /* SCTLR_EL1 initialization + * + * setting RES1 bits (29,28,23,22,20,11) to 1 + * and RES0 bits (31,30,27,21,17,13,10,6) + + * UCI,EE,EOE,WXN,nTWE,nTWI,UCT,DZE,I,UMA,SED,ITD, + * CP15BEN,SA0,SA,C,A,M to 0 + */ + mov \xreg1, #0x0800 + movk \xreg1, #0x30d0, lsl #16 + msr sctlr_el1, \xreg1 + + /* Return to the EL1_SP1 mode from EL2 */ + mov \xreg1, sp + msr sp_el1, \xreg1 /* Migrate SP */ + mrs \xreg1, vbar_el2 + msr vbar_el1, \xreg1 /* Migrate VBAR */ + mov \xreg1, #0x3c5 + msr spsr_el2, \xreg1 /* EL1_SP1 | D | A | I | F */ + msr elr_el2, lr + eret +.endm + +#if defined(CONFIG_GICV3) +.macro gic_wait_for_interrupt_m xreg1 +0 : wfi + mrs \xreg1, ICC_IAR1_EL1 + msr ICC_EOIR1_EL1, \xreg1 + cbnz \xreg1, 0b +.endm +#elif defined(CONFIG_GICV2) +.macro gic_wait_for_interrupt_m xreg1, wreg2 +0 : wfi + ldr \wreg2, [\xreg1, GICC_AIAR] + str \wreg2, [\xreg1, GICC_AEOIR] + and \wreg2, \wreg2, #3ff + cbnz \wreg2, 0b +.endm +#endif + #endif /* CONFIG_ARM64 */ #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/lib/gic_64.S b/arch/arm/lib/gic_64.S index d56396e..a3e18f7 100644 --- a/arch/arm/lib/gic_64.S +++ b/arch/arm/lib/gic_64.S @@ -10,8 +10,8 @@ #include <asm-offsets.h> #include <config.h> #include <linux/linkage.h> -#include <asm/macro.h> #include <asm/gic.h> +#include <asm/macro.h> /************************************************************************* @@ -181,14 +181,10 @@ ENDPROC(gic_kick_secondary_cpus) * *************************************************************************/ ENTRY(gic_wait_for_interrupt) -0: wfi #if defined(CONFIG_GICV3) - mrs x9, ICC_IAR1_EL1 - msr ICC_EOIR1_EL1, x9 + gic_wait_for_interrupt_m x9 #elif defined(CONFIG_GICV2) - ldr w9, [x0, GICC_AIAR] - str w9, [x0, GICC_AEOIR] + gic_wait_for_interrupt_m x0, w9 #endif - cbnz w9, 0b ret ENDPROC(gic_wait_for_interrupt) diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 6329b6c..fec02f2 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -11,6 +11,7 @@ endif CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 LDFLAGS_FINAL += --gc-sections +LDFLAGS_FINAL += --bss-plt PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections \ -meabi PLATFORM_CPPFLAGS += -D__powerpc__ -ffixed-r2 diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 6274f92..3d6ec84 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -441,7 +441,7 @@ phys_size_t initdram(int board_type) /* Board-specific functions defined in each board's ddr.c */ void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num); + unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl); void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn); unsigned int @@ -459,7 +459,7 @@ static void dump_spd_ddr_reg(void) spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR]; for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) - fsl_ddr_get_spd(spd[i], i); + fsl_ddr_get_spd(spd[i], i, CONFIG_DIMM_SLOTS_PER_CTLR); puts("SPD data of all dimms (zero vaule is omitted)...\n"); puts("Byte (hex) "); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index d1fc76a..8edf5bb 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -186,11 +186,6 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) #endif cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; - /* Is serdes enabled at all? */ - if (!cfg) { - printf("SERDES%d is not enabled\n", sd + 1); - return 0; - } /* Erratum A-007186 * Freescale Scratch Pad Fuse Register n (SFP_FSPFR0) diff --git a/board/ip860/u-boot.lds b/arch/powerpc/cpu/mpc8xx/u-boot.lds index 0eb2fba..0eb2fba 100644 --- a/board/ip860/u-boot.lds +++ b/arch/powerpc/cpu/mpc8xx/u-boot.lds diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 9273745..4cec5e1 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2012 Freescale Semiconductor, Inc. + * Copyright 2009-2014 Freescale Semiconductor, Inc. * * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains @@ -123,14 +123,14 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) { const char *modes[] = { "host", "peripheral", "otg" }; const char *phys[] = { "ulpi", "utmi" }; - const char *dr_mode_type = NULL; - const char *dr_phy_type = NULL; int usb_mode_off = -1; int usb_phy_off = -1; char str[5]; int i, j; for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; int mode_idx = -1, phy_idx = -1; snprintf(str, 5, "%s%d", "usb", i); if (hwconfig(str)) { @@ -150,18 +150,16 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) } } - if (mode_idx < 0 || phy_idx < 0) { - puts("ERROR: wrong usb mode/phy defined!!\n"); - return; - } - - dr_mode_type = modes[mode_idx]; - dr_phy_type = phys[phy_idx]; - if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); return; } + + if (mode_idx > -1) + dr_mode_type = modes[mode_idx]; + + if (phy_idx > -1) + dr_phy_type = phys[phy_idx]; } usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c index 59b3fe9..b57b2c3 100644 --- a/arch/x86/lib/physmem.c +++ b/arch/x86/lib/physmem.c @@ -189,7 +189,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size) /* Handle memory below 4GB. */ if (start <= max_addr) { - phys_size_t low_size = MIN(max_addr + 1 - start, size); + phys_size_t low_size = min(max_addr + 1 - start, size); void *start_ptr = (void *)(uintptr_t)start; assert(((phys_addr_t)(uintptr_t)start) == start); @@ -208,7 +208,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size) /* Handle the first partial page. */ if (offset) { phys_addr_t end = - MIN(map_addr + LARGE_PAGE_SIZE, start + size); + min(map_addr + LARGE_PAGE_SIZE, start + size); phys_size_t cur_size = end - start; x86_phys_memset_page(map_addr, offset, c, cur_size); size -= cur_size; diff --git a/board/LaCie/net2big_v2/MAINTAINERS b/board/LaCie/net2big_v2/MAINTAINERS index 1afaa5c..205c75e4 100644 --- a/board/LaCie/net2big_v2/MAINTAINERS +++ b/board/LaCie/net2big_v2/MAINTAINERS @@ -1,5 +1,5 @@ NET2BIG_V2 BOARD -M: - +#M: - S: Maintained F: board/LaCie/net2big_v2/ F: include/configs/lacie_kw.h diff --git a/board/LaCie/netspace_v2/MAINTAINERS b/board/LaCie/netspace_v2/MAINTAINERS index ad3dfa1..55fd50d 100644 --- a/board/LaCie/netspace_v2/MAINTAINERS +++ b/board/LaCie/netspace_v2/MAINTAINERS @@ -8,7 +8,7 @@ F: configs/netspace_max_v2_defconfig F: configs/netspace_v2_defconfig NETSPACE_LITE_V2 BOARD -M: - +#M: - S: Maintained F: configs/netspace_lite_v2_defconfig F: configs/netspace_mini_v2_defconfig diff --git a/board/LaCie/wireless_space/MAINTAINERS b/board/LaCie/wireless_space/MAINTAINERS index 8b36bff..8a27b9a 100644 --- a/board/LaCie/wireless_space/MAINTAINERS +++ b/board/LaCie/wireless_space/MAINTAINERS @@ -1,5 +1,5 @@ WIRELESS_SPACE BOARD -M: - +#M: - S: Maintained F: board/LaCie/wireless_space/ F: include/configs/wireless_space.h diff --git a/board/Marvell/db64360/MAINTAINERS b/board/Marvell/db64360/MAINTAINERS index 7383207..af3eb24 100644 --- a/board/Marvell/db64360/MAINTAINERS +++ b/board/Marvell/db64360/MAINTAINERS @@ -1,5 +1,5 @@ DB64360 BOARD -M: - +#M: - S: Maintained F: board/Marvell/db64360/ F: include/configs/DB64360.h diff --git a/board/Marvell/db64460/MAINTAINERS b/board/Marvell/db64460/MAINTAINERS index 751aac2..a30c51c 100644 --- a/board/Marvell/db64460/MAINTAINERS +++ b/board/Marvell/db64460/MAINTAINERS @@ -1,5 +1,5 @@ DB64460 BOARD -M: - +#M: - S: Maintained F: board/Marvell/db64460/ F: include/configs/DB64460.h diff --git a/board/Marvell/openrd/MAINTAINERS b/board/Marvell/openrd/MAINTAINERS index 7a52a8e..7a189ab 100644 --- a/board/Marvell/openrd/MAINTAINERS +++ b/board/Marvell/openrd/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/openrd.h F: configs/openrd_base_defconfig OPENRD_CLIENT BOARD -M: - +#M: - S: Maintained F: configs/openrd_client_defconfig F: configs/openrd_ultimate_defconfig diff --git a/board/a3000/MAINTAINERS b/board/a3000/MAINTAINERS index 2d8560f..303e5fd 100644 --- a/board/a3000/MAINTAINERS +++ b/board/a3000/MAINTAINERS @@ -1,5 +1,5 @@ A3000 BOARD -M: - +#M: - S: Maintained F: board/a3000/ F: include/configs/A3000.h diff --git a/board/amcc/bluestone/MAINTAINERS b/board/amcc/bluestone/MAINTAINERS index 4a329e9..9eb9bbd 100644 --- a/board/amcc/bluestone/MAINTAINERS +++ b/board/amcc/bluestone/MAINTAINERS @@ -1,5 +1,5 @@ BLUESTONE BOARD -M: Tirumala Marri <tmarri@apm.com> +#M: Tirumala Marri <tmarri@apm.com> S: Orphan (since 2014-03) F: board/amcc/bluestone/ F: include/configs/bluestone.h diff --git a/board/amcc/bubinga/MAINTAINERS b/board/amcc/bubinga/MAINTAINERS index 9d5ace2..3299cc3 100644 --- a/board/amcc/bubinga/MAINTAINERS +++ b/board/amcc/bubinga/MAINTAINERS @@ -1,5 +1,5 @@ BUBINGA BOARD -M: - +#M: - S: Maintained F: board/amcc/bubinga/ F: include/configs/bubinga.h diff --git a/board/amcc/yucca/MAINTAINERS b/board/amcc/yucca/MAINTAINERS index 0663003..1cbdb0e7 100644 --- a/board/amcc/yucca/MAINTAINERS +++ b/board/amcc/yucca/MAINTAINERS @@ -1,5 +1,5 @@ YUCCA BOARD -M: - +#M: - S: Maintained F: board/amcc/yucca/ F: include/configs/yucca.h diff --git a/board/armltd/versatile/MAINTAINERS b/board/armltd/versatile/MAINTAINERS index f390e53..a56dd99 100644 --- a/board/armltd/versatile/MAINTAINERS +++ b/board/armltd/versatile/MAINTAINERS @@ -1,5 +1,5 @@ VERSATILE BOARD -M: - +#M: - S: Maintained F: board/armltd/versatile/ F: include/configs/versatile.h diff --git a/board/armltd/vexpress/MAINTAINERS b/board/armltd/vexpress/MAINTAINERS index e730f4f..a6943d7 100644 --- a/board/armltd/vexpress/MAINTAINERS +++ b/board/armltd/vexpress/MAINTAINERS @@ -1,12 +1,12 @@ VEXPRESS BOARD -M: - +#M: - S: Maintained F: board/armltd/vexpress/ F: include/configs/vexpress_ca15_tc2.h F: configs/vexpress_ca15_tc2_defconfig VEXPRESS_CA5X2 BOARD -M: Matt Waddel <matt.waddel@linaro.org> +#M: Matt Waddel <matt.waddel@linaro.org> S: Orphan (since 2014-08) F: include/configs/vexpress_ca5x2.h F: configs/vexpress_ca5x2_defconfig diff --git a/board/atmel/atngw100/MAINTAINERS b/board/atmel/atngw100/MAINTAINERS index dd698ea..1c319f6 100644 --- a/board/atmel/atngw100/MAINTAINERS +++ b/board/atmel/atngw100/MAINTAINERS @@ -1,5 +1,5 @@ ATNGW100 BOARD -M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +#M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> S: Orphan (since 2014-06) F: board/atmel/atngw100/ F: include/configs/atngw100.h diff --git a/board/atmel/atstk1000/MAINTAINERS b/board/atmel/atstk1000/MAINTAINERS index 76365b0..378e1b3 100644 --- a/board/atmel/atstk1000/MAINTAINERS +++ b/board/atmel/atstk1000/MAINTAINERS @@ -1,5 +1,5 @@ ATSTK1000 BOARD -M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +#M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> S: Orphan (since 2014-06) F: board/atmel/atstk1000/ F: include/configs/atstk1002.h diff --git a/board/bc3450/MAINTAINERS b/board/bc3450/MAINTAINERS index e2a8363..81a7076 100644 --- a/board/bc3450/MAINTAINERS +++ b/board/bc3450/MAINTAINERS @@ -1,5 +1,5 @@ BC3450 BOARD -M: - +#M: - S: Maintained F: board/bc3450/ F: include/configs/BC3450.h diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 2762fcf..951b820 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -335,6 +335,11 @@ int board_mmc_init(bd_t *bis) #endif #ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1; +} + static iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), diff --git a/board/calao/sbc35_a9g20/MAINTAINERS b/board/calao/sbc35_a9g20/MAINTAINERS index d275230..0ac8225 100644 --- a/board/calao/sbc35_a9g20/MAINTAINERS +++ b/board/calao/sbc35_a9g20/MAINTAINERS @@ -1,5 +1,5 @@ SBC35_A9G20 BOARD -M: Albin Tonnerre <albin.tonnerre@free-electrons.com> +#M: Albin Tonnerre <albin.tonnerre@free-electrons.com> S: Orphan (since 2014-06) F: board/calao/sbc35_a9g20/ F: include/configs/sbc35_a9g20.h diff --git a/board/calao/tny_a9260/MAINTAINERS b/board/calao/tny_a9260/MAINTAINERS index 5a71b8e..1f24e39 100644 --- a/board/calao/tny_a9260/MAINTAINERS +++ b/board/calao/tny_a9260/MAINTAINERS @@ -1,5 +1,5 @@ TNY_A9260 BOARD -M: Albin Tonnerre <albin.tonnerre@free-electrons.com> +#M: Albin Tonnerre <albin.tonnerre@free-electrons.com> S: Orphan (since 2014-06) F: board/calao/tny_a9260/ F: include/configs/tny_a9260.h diff --git a/board/canmb/MAINTAINERS b/board/canmb/MAINTAINERS index aa4eb30..71750ea 100644 --- a/board/canmb/MAINTAINERS +++ b/board/canmb/MAINTAINERS @@ -1,5 +1,5 @@ CANMB BOARD -M: - +#M: - S: Maintained F: board/canmb/ F: include/configs/canmb.h diff --git a/board/cm-bf527/MAINTAINERS b/board/cm-bf527/MAINTAINERS index 789f5c4..fefcfcf 100644 --- a/board/cm-bf527/MAINTAINERS +++ b/board/cm-bf527/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF527 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf527/ F: include/configs/cm-bf527.h diff --git a/board/cm-bf533/MAINTAINERS b/board/cm-bf533/MAINTAINERS index f643043..0bf51fb 100644 --- a/board/cm-bf533/MAINTAINERS +++ b/board/cm-bf533/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF533 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf533/ F: include/configs/cm-bf533.h diff --git a/board/cm-bf537e/MAINTAINERS b/board/cm-bf537e/MAINTAINERS index 44735fa..63d2428 100644 --- a/board/cm-bf537e/MAINTAINERS +++ b/board/cm-bf537e/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF537E BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf537e/ F: include/configs/cm-bf537e.h diff --git a/board/cm-bf537u/MAINTAINERS b/board/cm-bf537u/MAINTAINERS index da925f8..a89cfca 100644 --- a/board/cm-bf537u/MAINTAINERS +++ b/board/cm-bf537u/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF537U BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf537u/ F: include/configs/cm-bf537u.h diff --git a/board/cm-bf548/MAINTAINERS b/board/cm-bf548/MAINTAINERS index 4cd83df..b7f5779 100644 --- a/board/cm-bf548/MAINTAINERS +++ b/board/cm-bf548/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF548 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf548/ F: include/configs/cm-bf548.h diff --git a/board/cm-bf561/MAINTAINERS b/board/cm-bf561/MAINTAINERS index a4606ff..9c86c8d 100644 --- a/board/cm-bf561/MAINTAINERS +++ b/board/cm-bf561/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF561 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf561/ F: include/configs/cm-bf561.h diff --git a/board/cm41xx/MAINTAINERS b/board/cm41xx/MAINTAINERS index f308b0f..f10eeb5 100644 --- a/board/cm41xx/MAINTAINERS +++ b/board/cm41xx/MAINTAINERS @@ -1,5 +1,5 @@ CM41XX BOARD -M: - +#M: - S: Maintained F: board/cm41xx/ F: include/configs/cm41xx.h diff --git a/board/cm5200/MAINTAINERS b/board/cm5200/MAINTAINERS index 9fc5365..1e1df3f 100644 --- a/board/cm5200/MAINTAINERS +++ b/board/cm5200/MAINTAINERS @@ -1,5 +1,5 @@ CM5200 BOARD -M: - +#M: - S: Maintained F: board/cm5200/ F: include/configs/cm5200.h diff --git a/board/cmi/MAINTAINERS b/board/cmi/MAINTAINERS index ab33d5d..60701bf 100644 --- a/board/cmi/MAINTAINERS +++ b/board/cmi/MAINTAINERS @@ -1,5 +1,5 @@ CMI BOARD -M: - +#M: - S: Maintained F: board/cmi/ F: include/configs/cmi_mpc5xx.h diff --git a/board/cobra5272/MAINTAINERS b/board/cobra5272/MAINTAINERS index 00942fc..a064da2 100644 --- a/board/cobra5272/MAINTAINERS +++ b/board/cobra5272/MAINTAINERS @@ -1,5 +1,5 @@ COBRA5272 BOARD -M: - +#M: - S: Maintained F: board/cobra5272/ F: include/configs/cobra5272.h diff --git a/board/congatec/cgtqmx6eval/MAINTAINERS b/board/congatec/cgtqmx6eval/MAINTAINERS index 53ad759..35f4a2a 100644 --- a/board/congatec/cgtqmx6eval/MAINTAINERS +++ b/board/congatec/cgtqmx6eval/MAINTAINERS @@ -1,5 +1,5 @@ CGTQMX6EVAL BOARD -M: Leo Sartre <lsartre@adeneo-embedded.com> +#M: Leo Sartre <lsartre@adeneo-embedded.com> S: Orphan (since 2014-06) F: board/congatec/cgtqmx6eval/ F: include/configs/cgtqmx6eval.h diff --git a/board/cpu87/MAINTAINERS b/board/cpu87/MAINTAINERS index 6e84f60..32804ea 100644 --- a/board/cpu87/MAINTAINERS +++ b/board/cpu87/MAINTAINERS @@ -1,5 +1,5 @@ CPU87 BOARD -M: - +#M: - S: Maintained F: board/cpu87/ F: include/configs/CPU87.h diff --git a/board/cray/L1/MAINTAINERS b/board/cray/L1/MAINTAINERS index e93819e..e43e91f 100644 --- a/board/cray/L1/MAINTAINERS +++ b/board/cray/L1/MAINTAINERS @@ -1,5 +1,5 @@ L1 BOARD -M: David Updegraff <dave@cray.com> +#M: David Updegraff <dave@cray.com> S: Orphan (since 2014-03) F: board/cray/L1/ F: include/configs/CRAYL1.h diff --git a/board/dave/PPChameleonEVB/MAINTAINERS b/board/dave/PPChameleonEVB/MAINTAINERS index 3af5b57..d43c6d0 100644 --- a/board/dave/PPChameleonEVB/MAINTAINERS +++ b/board/dave/PPChameleonEVB/MAINTAINERS @@ -1,5 +1,5 @@ PPCHAMELEONEVB BOARD -M: - +#M: - S: Maintained F: board/dave/PPChameleonEVB/ F: include/configs/CATcenter.h diff --git a/board/davinci/dm355evm/MAINTAINERS b/board/davinci/dm355evm/MAINTAINERS index ef586b3..c017e09 100644 --- a/board/davinci/dm355evm/MAINTAINERS +++ b/board/davinci/dm355evm/MAINTAINERS @@ -1,5 +1,5 @@ DM355EVM BOARD -M: Sandeep Paulraj <s-paulraj@ti.com> +#M: Sandeep Paulraj <s-paulraj@ti.com> S: Orphan (since 2014-08) F: board/davinci/dm355evm/ F: include/configs/davinci_dm355evm.h diff --git a/board/davinci/dm355leopard/MAINTAINERS b/board/davinci/dm355leopard/MAINTAINERS index 2fc1e00..ed04d43 100644 --- a/board/davinci/dm355leopard/MAINTAINERS +++ b/board/davinci/dm355leopard/MAINTAINERS @@ -1,5 +1,5 @@ DM355LEOPARD BOARD -M: Sandeep Paulraj <s-paulraj@ti.com> +#M: Sandeep Paulraj <s-paulraj@ti.com> S: Orphan (since 2014-08) F: board/davinci/dm355leopard/ F: include/configs/davinci_dm355leopard.h diff --git a/board/davinci/dm365evm/MAINTAINERS b/board/davinci/dm365evm/MAINTAINERS index 0bfe02d..97c3ed3 100644 --- a/board/davinci/dm365evm/MAINTAINERS +++ b/board/davinci/dm365evm/MAINTAINERS @@ -1,5 +1,5 @@ DM365EVM BOARD -M: Sandeep Paulraj <s-paulraj@ti.com> +#M: Sandeep Paulraj <s-paulraj@ti.com> S: Orphan (since 2014-08) F: board/davinci/dm365evm/ F: include/configs/davinci_dm365evm.h diff --git a/board/davinci/dm6467evm/MAINTAINERS b/board/davinci/dm6467evm/MAINTAINERS index bb40536..8ca53c4 100644 --- a/board/davinci/dm6467evm/MAINTAINERS +++ b/board/davinci/dm6467evm/MAINTAINERS @@ -1,5 +1,5 @@ DM6467EVM BOARD -M: Sandeep Paulraj <s-paulraj@ti.com> +#M: Sandeep Paulraj <s-paulraj@ti.com> S: Orphan (since 2014-08) F: board/davinci/dm6467evm/ F: include/configs/davinci_dm6467evm.h diff --git a/board/davinci/dvevm/MAINTAINERS b/board/davinci/dvevm/MAINTAINERS index 4b3ce45..a718b90 100644 --- a/board/davinci/dvevm/MAINTAINERS +++ b/board/davinci/dvevm/MAINTAINERS @@ -1,5 +1,5 @@ DVEVM BOARD -M: - +#M: - S: Maintained F: board/davinci/dvevm/ F: include/configs/davinci_dvevm.h diff --git a/board/davinci/schmoogie/MAINTAINERS b/board/davinci/schmoogie/MAINTAINERS index b1fc29c..808e7fc 100644 --- a/board/davinci/schmoogie/MAINTAINERS +++ b/board/davinci/schmoogie/MAINTAINERS @@ -1,5 +1,5 @@ SCHMOOGIE BOARD -M: - +#M: - S: Maintained F: board/davinci/schmoogie/ F: include/configs/davinci_schmoogie.h diff --git a/board/davinci/sffsdr/MAINTAINERS b/board/davinci/sffsdr/MAINTAINERS index 428d003..5c7e132 100644 --- a/board/davinci/sffsdr/MAINTAINERS +++ b/board/davinci/sffsdr/MAINTAINERS @@ -1,5 +1,5 @@ SFFSDR BOARD -M: - +#M: - S: Maintained F: board/davinci/sffsdr/ F: include/configs/davinci_sffsdr.h diff --git a/board/davinci/sonata/MAINTAINERS b/board/davinci/sonata/MAINTAINERS index 625978c..40659e5 100644 --- a/board/davinci/sonata/MAINTAINERS +++ b/board/davinci/sonata/MAINTAINERS @@ -1,5 +1,5 @@ SONATA BOARD -M: - +#M: - S: Maintained F: board/davinci/sonata/ F: include/configs/davinci_sonata.h diff --git a/board/earthlcd/favr-32-ezkit/MAINTAINERS b/board/earthlcd/favr-32-ezkit/MAINTAINERS index 30453c6..89ba862 100644 --- a/board/earthlcd/favr-32-ezkit/MAINTAINERS +++ b/board/earthlcd/favr-32-ezkit/MAINTAINERS @@ -1,5 +1,5 @@ FAVR-32-EZKIT BOARD -M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> +#M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> S: Orphan (since 2014-06) F: board/earthlcd/favr-32-ezkit/ F: include/configs/favr-32-ezkit.h diff --git a/board/eltec/elppc/MAINTAINERS b/board/eltec/elppc/MAINTAINERS index 5258b3a..e3b35f1 100644 --- a/board/eltec/elppc/MAINTAINERS +++ b/board/eltec/elppc/MAINTAINERS @@ -1,5 +1,5 @@ ELPPC BOARD -M: - +#M: - S: Maintained F: board/eltec/elppc/ F: include/configs/ELPPC.h diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds deleted file mode 100644 index 7ae91ff..0000000 --- a/board/eltec/mhpc/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2001-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c index 530ea4f..a725f15 100644 --- a/board/embest/mx6boards/mx6boards.c +++ b/board/embest/mx6boards/mx6boards.c @@ -285,6 +285,11 @@ iomux_v3_cfg_t const ecspi1_pads[] = { MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1; +} + static void setup_spi(void) { imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds deleted file mode 100644 index 79fcbf4..0000000 --- a/board/emk/top860/u-boot.lds +++ /dev/null @@ -1,83 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/ep8260/MAINTAINERS b/board/ep8260/MAINTAINERS index bb273df..bfa923c 100644 --- a/board/ep8260/MAINTAINERS +++ b/board/ep8260/MAINTAINERS @@ -1,5 +1,5 @@ EP8260 BOARD -M: Frank Panno <fpanno@delphintech.com> +#M: Frank Panno <fpanno@delphintech.com> S: Orphan (since 2014-06) F: board/ep8260/ F: include/configs/ep8260.h diff --git a/board/ep82xxm/MAINTAINERS b/board/ep82xxm/MAINTAINERS index 822261b..c053df9 100644 --- a/board/ep82xxm/MAINTAINERS +++ b/board/ep82xxm/MAINTAINERS @@ -1,5 +1,5 @@ EP82XXM BOARD -M: - +#M: - S: Maintained F: board/ep82xxm/ F: include/configs/ep82xxm.h diff --git a/board/esg/ima3-mx53/MAINTAINERS b/board/esg/ima3-mx53/MAINTAINERS index c434eb9..96de081 100644 --- a/board/esg/ima3-mx53/MAINTAINERS +++ b/board/esg/ima3-mx53/MAINTAINERS @@ -1,5 +1,5 @@ IMA3-MX53 BOARD -M: - +#M: - S: Maintained F: board/esg/ima3-mx53/ F: include/configs/ima3-mx53.h diff --git a/board/espt/MAINTAINERS b/board/espt/MAINTAINERS index ff6e20c..fdbbc3e 100644 --- a/board/espt/MAINTAINERS +++ b/board/espt/MAINTAINERS @@ -1,5 +1,5 @@ ESPT BOARD -M: - +#M: - S: Maintained F: board/espt/ F: include/configs/espt.h diff --git a/board/evb64260/MAINTAINERS b/board/evb64260/MAINTAINERS index f8307cc..d50dda5 100644 --- a/board/evb64260/MAINTAINERS +++ b/board/evb64260/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/P3G4.h F: configs/P3G4_defconfig ZUMA BOARD -M: Nye Liu <nyet@zumanetworks.com> +#M: Nye Liu <nyet@zumanetworks.com> S: Orphan (since 2014-04) F: include/configs/ZUMA.h F: configs/ZUMA_defconfig diff --git a/board/exmeritus/hww1u1a/MAINTAINERS b/board/exmeritus/hww1u1a/MAINTAINERS index e2fe2a6..b37f10b 100644 --- a/board/exmeritus/hww1u1a/MAINTAINERS +++ b/board/exmeritus/hww1u1a/MAINTAINERS @@ -1,5 +1,5 @@ HWW1U1A BOARD -M: Kyle Moffett <Kyle.D.Moffett@boeing.com> +#M: Kyle Moffett <Kyle.D.Moffett@boeing.com> S: Orphan (since 2014-06) F: board/exmeritus/hww1u1a/ F: include/configs/HWW1U1A.h diff --git a/board/freescale/b4860qds/MAINTAINERS b/board/freescale/b4860qds/MAINTAINERS index 9f9a612..ac02bb7 100644 --- a/board/freescale/b4860qds/MAINTAINERS +++ b/board/freescale/b4860qds/MAINTAINERS @@ -1,5 +1,5 @@ B4860QDS BOARD -M: - +#M: - S: Maintained F: board/freescale/b4860qds/ F: include/configs/B4860QDS.h diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c index 6789efb..e683be3 100644 --- a/board/freescale/common/ics307_clk.c +++ b/board/freescale/common/ics307_clk.c @@ -67,7 +67,7 @@ unsigned long ics307_sysclk_calculator(unsigned long out_freq) continue; /* Calculate the temp out frequency */ tmp_out = input_freq * 2 * vdw / (rdw * od * 1000); - diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out); + diff = max(out_freq, tmp_out) - min(out_freq, tmp_out); /* * calculate the percent, the precision is 1/1000 * If greater than 1/1000, continue diff --git a/board/freescale/corenet_ds/MAINTAINERS b/board/freescale/corenet_ds/MAINTAINERS index 841d82f..c8ca674 100644 --- a/board/freescale/corenet_ds/MAINTAINERS +++ b/board/freescale/corenet_ds/MAINTAINERS @@ -1,5 +1,5 @@ CORENET_DS BOARD -M: - +#M: - S: Maintained F: board/freescale/corenet_ds/ F: include/configs/P3041DS.h diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS index 021d82b..ccf4513 100644 --- a/board/freescale/ls1021aqds/MAINTAINERS +++ b/board/freescale/ls1021aqds/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/freescale/ls1021aqds/ F: include/configs/ls1021aqds.h F: configs/ls1021aqds_nor_defconfig +F: configs/ls1021aqds_ddr4_nor_defconfig diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c index 679c654..5898e33 100644 --- a/board/freescale/ls1021aqds/ddr.c +++ b/board/freescale/ls1021aqds/ddr.c @@ -79,7 +79,6 @@ found: */ popts->wrlvl_override = 1; popts->wrlvl_sample = 0xf; - popts->cswl_override = DDR_CSWL_CS0; /* * Rtt and Rtt_WR override @@ -89,9 +88,17 @@ found: /* Enable ZQ calibration */ popts->zq_en = 1; +#ifdef CONFIG_SYS_FSL_DDR4 + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) | + DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */ +#else + popts->cswl_override = DDR_CSWL_CS0; + /* DHC_EN =1, ODT = 75 Ohm */ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +#endif } #ifdef CONFIG_SYS_DDR_RAW_TIMING diff --git a/board/freescale/ls1021aqds/ddr.h b/board/freescale/ls1021aqds/ddr.h index 16d87cb..f819c99 100644 --- a/board/freescale/ls1021aqds/ddr.h +++ b/board/freescale/ls1021aqds/ddr.h @@ -30,6 +30,13 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ +#ifdef CONFIG_SYS_FSL_DDR4 + {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,}, + {1, 1666, 0, 4, 8, 0x090A0B0B, 0x0C0D0E0C,}, + {1, 1900, 0, 4, 9, 0x0A0B0C0B, 0x0D0E0F0D,}, + {1, 2200, 0, 4, 10, 0x0B0C0D0C, 0x0E0F110E,}, +#elif defined(CONFIG_SYS_FSL_DDR3) {1, 833, 1, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, {1, 1350, 1, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, {1, 833, 2, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, @@ -39,6 +46,9 @@ static const struct board_specific_parameters udimm0[] = { {2, 1350, 0, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, {2, 1666, 4, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, {2, 1666, 0, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, +#else +#error DDR type not defined +#endif {} }; diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2085a/ddr.c index 257bc16..b4a3fc9 100644 --- a/board/freescale/ls2085a/ddr.c +++ b/board/freescale/ls2085a/ddr.c @@ -30,9 +30,9 @@ void fsl_ddr_board_options(memctl_options_t *popts, * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; */ if (popts->registered_dimm_en) - pbsp = rdimms[0]; + pbsp = rdimms[ctrl_num]; else - pbsp = udimms[0]; + pbsp = udimms[ctrl_num]; /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr @@ -72,6 +72,12 @@ found: pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, pbsp->wrlvl_ctl_3); + if (ctrl_num == CONFIG_DP_DDR_CTRL) { + /* force DDR bus width to 32 bits */ + popts->data_bus_width = 1; + popts->otf_burst_chop_en = 0; + popts->burst_length = DDR_BL8; + } /* * Factors to consider for half-strength driver enable: * - number of DIMMs installed @@ -163,6 +169,10 @@ phys_size_t initdram(int board_type) void dram_init_banksize(void) { +#ifdef CONFIG_SYS_DP_DDR_BASE_PHY + phys_size_t dp_ddr_size; +#endif + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; @@ -172,4 +182,24 @@ void dram_init_banksize(void) } else { gd->bd->bi_dram[0].size = gd->ram_size; } + +#ifdef CONFIG_SYS_DP_DDR_BASE_PHY + /* initialize DP-DDR here */ + puts("DP-DDR: "); + /* + * DDR controller use 0 as the base address for binding. + * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. + */ + dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, + CONFIG_DP_DDR_CTRL, + CONFIG_DP_DDR_NUM_CTRLS, + CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR, + NULL, NULL, NULL); + if (dp_ddr_size) { + gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; + gd->bd->bi_dram[2].size = dp_ddr_size; + } else { + puts("Not detected"); + } +#endif } diff --git a/board/freescale/ls2085a/ddr.h b/board/freescale/ls2085a/ddr.h index 77f6aaf..9958a68 100644 --- a/board/freescale/ls2085a/ddr.h +++ b/board/freescale/ls2085a/ddr.h @@ -33,6 +33,18 @@ static const struct board_specific_parameters udimm0[] = { {} }; +/* DP-DDR DIMM */ +static const struct board_specific_parameters udimm2[] = { + /* + * memory controller 2 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 2140, 0, 4, 4, 0x0, 0x0}, + {1, 2140, 0, 4, 4, 0x0, 0x0}, + {} +}; + static const struct board_specific_parameters rdimm0[] = { /* * memory controller 0 @@ -45,12 +57,29 @@ static const struct board_specific_parameters rdimm0[] = { {} }; +/* DP-DDR DIMM */ +static const struct board_specific_parameters rdimm2[] = { + /* + * memory controller 2 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {4, 2140, 0, 5, 4, 0x0, 0x0}, + {2, 2140, 0, 5, 4, 0x0, 0x0}, + {1, 2140, 0, 4, 4, 0x0, 0x0}, + {} +}; + static const struct board_specific_parameters *udimms[] = { udimm0, + udimm0, + udimm2, }; static const struct board_specific_parameters *rdimms[] = { rdimm0, + rdimm0, + rdimm2, }; diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c index a18db1d..2c79a71 100644 --- a/board/freescale/ls2085a/ls2085a.c +++ b/board/freescale/ls2085a/ls2085a.c @@ -13,12 +13,18 @@ #include <fdt_support.h> #include <libfdt.h> #include <fsl_mc.h> +#include <environment.h> DECLARE_GLOBAL_DATA_PTR; int board_init(void) { init_final_memctl_regs(); + +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + return 0; } @@ -29,9 +35,20 @@ int board_early_init_f(void) return 0; } +void detail_board_ddr_info(void) +{ + puts("\nDDR "); + print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); + print_ddr_info(0); + if (gd->bd->bi_dram[2].size) { + puts("\nDP-DDR "); + print_size(gd->bd->bi_dram[2].size, ""); + print_ddr_info(CONFIG_DP_DDR_CTRL); + } +} + int dram_init(void) { - printf("DRAM: "); gd->ram_size = initdram(0); return 0; @@ -88,6 +105,8 @@ void ft_board_setup(void *blob, bd_t *bd) phys_addr_t base; phys_size_t size; + ft_cpu_setup(blob, bd); + /* limit the memory size to bank 1 until Linux can handle 40-bit PA */ base = getenv_bootm_low(); size = getenv_bootm_size(); diff --git a/board/freescale/m5208evbe/MAINTAINERS b/board/freescale/m5208evbe/MAINTAINERS index 65d04df..c9c3c88 100644 --- a/board/freescale/m5208evbe/MAINTAINERS +++ b/board/freescale/m5208evbe/MAINTAINERS @@ -1,5 +1,5 @@ M5208EVBE BOARD -M: - +#M: - S: Maintained F: board/freescale/m5208evbe/ F: include/configs/M5208EVBE.h diff --git a/board/freescale/m5249evb/MAINTAINERS b/board/freescale/m5249evb/MAINTAINERS index 22301b7..c2273c3 100644 --- a/board/freescale/m5249evb/MAINTAINERS +++ b/board/freescale/m5249evb/MAINTAINERS @@ -1,5 +1,5 @@ M5249EVB BOARD -M: - +#M: - S: Maintained F: board/freescale/m5249evb/ F: include/configs/M5249EVB.h diff --git a/board/freescale/m5253evbe/MAINTAINERS b/board/freescale/m5253evbe/MAINTAINERS index 1c21b03..74acd1e 100644 --- a/board/freescale/m5253evbe/MAINTAINERS +++ b/board/freescale/m5253evbe/MAINTAINERS @@ -1,5 +1,5 @@ M5253EVBE BOARD -M: Hayden Fraser <Hayden.Fraser@freescale.com> +#M: Hayden Fraser <Hayden.Fraser@freescale.com> S: Orphan (since 2014-06) F: board/freescale/m5253evbe/ F: include/configs/M5253EVBE.h diff --git a/board/freescale/m5272c3/MAINTAINERS b/board/freescale/m5272c3/MAINTAINERS index aa4739f..e586630 100644 --- a/board/freescale/m5272c3/MAINTAINERS +++ b/board/freescale/m5272c3/MAINTAINERS @@ -1,5 +1,5 @@ M5272C3 BOARD -M: - +#M: - S: Maintained F: board/freescale/m5272c3/ F: include/configs/M5272C3.h diff --git a/board/freescale/m5275evb/MAINTAINERS b/board/freescale/m5275evb/MAINTAINERS index b87d52c..4e6dbb1 100644 --- a/board/freescale/m5275evb/MAINTAINERS +++ b/board/freescale/m5275evb/MAINTAINERS @@ -1,5 +1,5 @@ M5275EVB BOARD -M: - +#M: - S: Maintained F: board/freescale/m5275evb/ F: include/configs/M5275EVB.h diff --git a/board/freescale/m5282evb/MAINTAINERS b/board/freescale/m5282evb/MAINTAINERS index f945ab4..305e748 100644 --- a/board/freescale/m5282evb/MAINTAINERS +++ b/board/freescale/m5282evb/MAINTAINERS @@ -1,5 +1,5 @@ M5282EVB BOARD -M: - +#M: - S: Maintained F: board/freescale/m5282evb/ F: include/configs/M5282EVB.h diff --git a/board/freescale/m54418twr/MAINTAINERS b/board/freescale/m54418twr/MAINTAINERS index 37b24c7..f88aed9 100644 --- a/board/freescale/m54418twr/MAINTAINERS +++ b/board/freescale/m54418twr/MAINTAINERS @@ -1,5 +1,5 @@ M54418TWR BOARD -M: - +#M: - S: Maintained F: board/freescale/m54418twr/ F: include/configs/M54418TWR.h diff --git a/board/freescale/m54451evb/MAINTAINERS b/board/freescale/m54451evb/MAINTAINERS index be14549..52a2681 100644 --- a/board/freescale/m54451evb/MAINTAINERS +++ b/board/freescale/m54451evb/MAINTAINERS @@ -1,5 +1,5 @@ M54451EVB BOARD -M: - +#M: - S: Maintained F: board/freescale/m54451evb/ F: include/configs/M54451EVB.h diff --git a/board/freescale/mpc5121ads/MAINTAINERS b/board/freescale/mpc5121ads/MAINTAINERS index 0c7f682..d4aab8f 100644 --- a/board/freescale/mpc5121ads/MAINTAINERS +++ b/board/freescale/mpc5121ads/MAINTAINERS @@ -1,5 +1,5 @@ MPC5121ADS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc5121ads/ F: include/configs/mpc5121ads.h diff --git a/board/freescale/mpc8313erdb/MAINTAINERS b/board/freescale/mpc8313erdb/MAINTAINERS index 923ba95..807fb0b 100644 --- a/board/freescale/mpc8313erdb/MAINTAINERS +++ b/board/freescale/mpc8313erdb/MAINTAINERS @@ -1,5 +1,5 @@ MPC8313ERDB BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8313erdb/ F: include/configs/MPC8313ERDB.h diff --git a/board/freescale/mpc8349itx/MAINTAINERS b/board/freescale/mpc8349itx/MAINTAINERS index ed6e4e5..d0388ad 100644 --- a/board/freescale/mpc8349itx/MAINTAINERS +++ b/board/freescale/mpc8349itx/MAINTAINERS @@ -1,5 +1,5 @@ MPC8349ITX BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8349itx/ F: include/configs/MPC8349ITX.h diff --git a/board/freescale/mpc8360erdk/MAINTAINERS b/board/freescale/mpc8360erdk/MAINTAINERS index cb075d6..e5b5995 100644 --- a/board/freescale/mpc8360erdk/MAINTAINERS +++ b/board/freescale/mpc8360erdk/MAINTAINERS @@ -1,5 +1,5 @@ MPC8360ERDK BOARD -M: Anton Vorontsov <avorontsov@ru.mvista.com> +#M: Anton Vorontsov <avorontsov@ru.mvista.com> S: Orphan (since 2014-03) F: board/freescale/mpc8360erdk/ F: include/configs/MPC8360ERDK.h diff --git a/board/freescale/mpc837xerdb/MAINTAINERS b/board/freescale/mpc837xerdb/MAINTAINERS index c216d8d..8592a2c 100644 --- a/board/freescale/mpc837xerdb/MAINTAINERS +++ b/board/freescale/mpc837xerdb/MAINTAINERS @@ -1,5 +1,5 @@ MPC837XERDB BOARD -M: Joe D'Abbraccio <ljd015@freescale.com> +#M: Joe D'Abbraccio <ljd015@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc837xerdb/ F: include/configs/MPC837XERDB.h diff --git a/board/freescale/mpc8536ds/MAINTAINERS b/board/freescale/mpc8536ds/MAINTAINERS index 51d7cd7..953072c 100644 --- a/board/freescale/mpc8536ds/MAINTAINERS +++ b/board/freescale/mpc8536ds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8536DS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8536ds/ F: include/configs/MPC8536DS.h diff --git a/board/freescale/mpc8540ads/MAINTAINERS b/board/freescale/mpc8540ads/MAINTAINERS index 41a2191..acc4821 100644 --- a/board/freescale/mpc8540ads/MAINTAINERS +++ b/board/freescale/mpc8540ads/MAINTAINERS @@ -1,5 +1,5 @@ MPC8540ADS BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8540ads/ F: include/configs/MPC8540ADS.h diff --git a/board/freescale/mpc8541cds/MAINTAINERS b/board/freescale/mpc8541cds/MAINTAINERS index 073210d..d421b12 100644 --- a/board/freescale/mpc8541cds/MAINTAINERS +++ b/board/freescale/mpc8541cds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8541CDS BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8541cds/ F: include/configs/MPC8541CDS.h diff --git a/board/freescale/mpc8544ds/MAINTAINERS b/board/freescale/mpc8544ds/MAINTAINERS index 81b664c..328be7f 100644 --- a/board/freescale/mpc8544ds/MAINTAINERS +++ b/board/freescale/mpc8544ds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8544DS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8544ds/ F: include/configs/MPC8544DS.h diff --git a/board/freescale/mpc8548cds/MAINTAINERS b/board/freescale/mpc8548cds/MAINTAINERS index 89b2425..6f22922 100644 --- a/board/freescale/mpc8548cds/MAINTAINERS +++ b/board/freescale/mpc8548cds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8548CDS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8548cds/ F: include/configs/MPC8548CDS.h diff --git a/board/freescale/mpc8555cds/MAINTAINERS b/board/freescale/mpc8555cds/MAINTAINERS index 14470d7..1ef6690 100644 --- a/board/freescale/mpc8555cds/MAINTAINERS +++ b/board/freescale/mpc8555cds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8555CDS BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8555cds/ F: include/configs/MPC8555CDS.h diff --git a/board/freescale/mpc8560ads/MAINTAINERS b/board/freescale/mpc8560ads/MAINTAINERS index 836def2..96e6da2 100644 --- a/board/freescale/mpc8560ads/MAINTAINERS +++ b/board/freescale/mpc8560ads/MAINTAINERS @@ -1,5 +1,5 @@ MPC8560ADS BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8560ads/ F: include/configs/MPC8560ADS.h diff --git a/board/freescale/mpc8568mds/MAINTAINERS b/board/freescale/mpc8568mds/MAINTAINERS index 72c25f5..379d8cc 100644 --- a/board/freescale/mpc8568mds/MAINTAINERS +++ b/board/freescale/mpc8568mds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8568MDS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8568mds/ F: include/configs/MPC8568MDS.h diff --git a/board/freescale/mpc8569mds/MAINTAINERS b/board/freescale/mpc8569mds/MAINTAINERS index b5478db..c181407 100644 --- a/board/freescale/mpc8569mds/MAINTAINERS +++ b/board/freescale/mpc8569mds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8569MDS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8569mds/ F: include/configs/MPC8569MDS.h diff --git a/board/freescale/mpc8610hpcd/MAINTAINERS b/board/freescale/mpc8610hpcd/MAINTAINERS index 993c02a..de6ab89 100644 --- a/board/freescale/mpc8610hpcd/MAINTAINERS +++ b/board/freescale/mpc8610hpcd/MAINTAINERS @@ -1,5 +1,5 @@ MPC8610HPCD BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8610hpcd/ F: include/configs/MPC8610HPCD.h diff --git a/board/freescale/mpc8641hpcn/MAINTAINERS b/board/freescale/mpc8641hpcn/MAINTAINERS index 34bcc6c..9790247 100644 --- a/board/freescale/mpc8641hpcn/MAINTAINERS +++ b/board/freescale/mpc8641hpcn/MAINTAINERS @@ -1,5 +1,5 @@ MPC8641HPCN BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8641hpcn/ F: include/configs/MPC8641HPCN.h diff --git a/board/freescale/mx31ads/MAINTAINERS b/board/freescale/mx31ads/MAINTAINERS index e9c8fe7..5f6ec26 100644 --- a/board/freescale/mx31ads/MAINTAINERS +++ b/board/freescale/mx31ads/MAINTAINERS @@ -1,5 +1,5 @@ MX31ADS BOARD -M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> +#M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> S: Orphan (since 2013-09) F: board/freescale/mx31ads/ F: include/configs/mx31ads.h diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index dd6d2a6..1cb7561 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -259,6 +259,13 @@ int board_init(void) return 0; } +#ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1; +} +#endif + #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 80c8ebd..81dcd6e 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -513,6 +513,13 @@ static int pfuze_init(void) return 0; } +#ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1; +} +#endif + #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index a990b4c..a0832f4 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -82,6 +82,11 @@ static iomux_v3_cfg_t ecspi1_pads[] = { MX6_PAD_ECSPI1_SS0__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 11)) : -1; +} + static void setup_spi(void) { imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); diff --git a/board/freescale/p1010rdb/MAINTAINERS b/board/freescale/p1010rdb/MAINTAINERS index 579e775..db00143 100644 --- a/board/freescale/p1010rdb/MAINTAINERS +++ b/board/freescale/p1010rdb/MAINTAINERS @@ -1,5 +1,5 @@ P1010RDB BOARD -M: - +#M: - S: Maintained F: board/freescale/p1010rdb/ F: include/configs/P1010RDB.h diff --git a/board/freescale/p1023rdb/MAINTAINERS b/board/freescale/p1023rdb/MAINTAINERS index 81501aa..c06bac6 100644 --- a/board/freescale/p1023rdb/MAINTAINERS +++ b/board/freescale/p1023rdb/MAINTAINERS @@ -1,5 +1,5 @@ P1023RDB BOARD -M: - +#M: - S: Maintained F: board/freescale/p1023rdb/ F: include/configs/P1023RDB.h diff --git a/board/freescale/p1_p2_rdb/MAINTAINERS b/board/freescale/p1_p2_rdb/MAINTAINERS index ad0a858..aabf587 100644 --- a/board/freescale/p1_p2_rdb/MAINTAINERS +++ b/board/freescale/p1_p2_rdb/MAINTAINERS @@ -1,5 +1,5 @@ P1_P2_RDB BOARD -M: - +#M: - S: Maintained F: board/freescale/p1_p2_rdb/ F: include/configs/P1_P2_RDB.h diff --git a/board/freescale/p1_p2_rdb_pc/MAINTAINERS b/board/freescale/p1_p2_rdb_pc/MAINTAINERS index 4d429fe..c2e9247 100644 --- a/board/freescale/p1_p2_rdb_pc/MAINTAINERS +++ b/board/freescale/p1_p2_rdb_pc/MAINTAINERS @@ -1,5 +1,5 @@ P1_P2_RDB_PC BOARD -M: - +#M: - S: Maintained F: board/freescale/p1_p2_rdb_pc/ F: include/configs/p1_p2_rdb_pc.h diff --git a/board/freescale/p1_twr/MAINTAINERS b/board/freescale/p1_twr/MAINTAINERS index 2d7d7e1..c19d436 100644 --- a/board/freescale/p1_twr/MAINTAINERS +++ b/board/freescale/p1_twr/MAINTAINERS @@ -1,5 +1,5 @@ P1_TWR BOARD -M: - +#M: - S: Maintained F: board/freescale/p1_twr/ F: include/configs/p1_twr.h diff --git a/board/freescale/p2020ds/MAINTAINERS b/board/freescale/p2020ds/MAINTAINERS index 42cb18d..cb61fc5 100644 --- a/board/freescale/p2020ds/MAINTAINERS +++ b/board/freescale/p2020ds/MAINTAINERS @@ -1,5 +1,5 @@ P2020DS BOARD -M: - +#M: - S: Maintained F: board/freescale/p2020ds/ F: include/configs/P2020DS.h diff --git a/board/freescale/p2041rdb/MAINTAINERS b/board/freescale/p2041rdb/MAINTAINERS index bb5bb83..d93cb0b 100644 --- a/board/freescale/p2041rdb/MAINTAINERS +++ b/board/freescale/p2041rdb/MAINTAINERS @@ -1,5 +1,5 @@ P2041RDB BOARD -M: - +#M: - S: Maintained F: board/freescale/p2041rdb/ F: include/configs/P2041RDB.h diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c index 1929bba..06d9086 100644 --- a/board/freescale/t1040qds/eth.c +++ b/board/freescale/t1040qds/eth.c @@ -241,6 +241,8 @@ static void initialize_lane_to_slot(void) break; case 0xA7: lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; lane_to_slot[7] = 7; break; case 0xAA: @@ -410,6 +412,8 @@ void t1040_handle_phy_interface_sgmii(int i) fm_info_set_phy_address(i, riser_phy_addr[1]); if (FM1_DTSEC3 == i) fm_info_set_phy_address(i, riser_phy_addr[2]); + if (FM1_DTSEC5 == i) + fm_info_set_phy_address(i, riser_phy_addr[3]); mdio_mux[i] = EMI1_SLOT7; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS index 364b0a9..b61e1c0 100644 --- a/board/freescale/t104xrdb/MAINTAINERS +++ b/board/freescale/t104xrdb/MAINTAINERS @@ -6,12 +6,13 @@ F: include/configs/T104xRDB.h F: configs/T1040RDB_defconfig F: configs/T1040RDB_NAND_defconfig F: configs/T1040RDB_SPIFLASH_defconfig +F: configs/T1042RDB_defconfig F: configs/T1042RDB_PI_defconfig F: configs/T1042RDB_PI_NAND_defconfig F: configs/T1042RDB_PI_SPIFLASH_defconfig T1040RDB_SDCARD BOARD -M: - +#M: - S: Maintained F: configs/T1040RDB_SDCARD_defconfig F: configs/T1042RDB_PI_SDCARD_defconfig diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index cdbe1fa..ac95b5e 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -4,10 +4,23 @@ The T1040RDB is a Freescale reference board that hosts the T1040 SoC (and variants). Variants inclued T1042 presonality of T1040, in which case T1040RDB can also be called T1042RDB. +The T1042RDB is a Freescale reference board that hosts the T1042 SoC +(and variants). The board is similar to T1040RDB, T1040 is a reduced +personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch). + The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC. (a personality of T1040 SoC). The board is similar to T1040RDB but is designed specially with low power features targeted for Printing Image Market. +Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB +------------------------------------------------------------------------- +Board Si Protocol Targeted Market +------------------------------------------------------------------------- +T1040RDB T1040 0x66 Networking +T1040RDB T1042 0x86 Networking +T1042RDB_PI T1042 0x06 Printing & Imaging + + T1040 SoC Overview ------------------ The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA @@ -194,10 +207,10 @@ The below commands apply to the board Commands for switching to alternate bank. 1. To change from vbank0 to vbank4 - => qixis_reset altbank (it will boot using vbank4) + => cpld reset altbank (it will boot using vbank4) 2.To change from vbank4 to vbank0 - => qixis reset (it will boot using vbank0) + => cpld reset (it will boot using vbank0) NAND boot with 2 Stage boot loader ---------------------------------- @@ -259,15 +272,15 @@ Switch Settings: (ON is 0, OFF is 1) =============== NAND boot SW setting: SW1: 10001000 -SW2: 00111001 +SW2: 00111011 SW3: 11110001 SPI boot SW setting: SW1: 00100010 -SW2: 10111001 +SW2: 10111011 SW3: 11100001 SD boot SW setting: SW1: 00100000 -SW2: 00111001 +SW2: 00111011 SW3: 11100001 diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c index 34c9224..2c331ee 100644 --- a/board/freescale/t104xrdb/ddr.c +++ b/board/freescale/t104xrdb/ddr.c @@ -105,8 +105,8 @@ found: popts->zq_en = 1; /* DHC_EN =1, ODT = 75 Ohm */ - popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF); - popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF); + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); } phys_size_t initdram(int board_type) diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index 63e5f90..c8b6c67 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -43,6 +43,16 @@ int board_eth_init(bd_t *bis) CONFIG_SYS_SGMII1_PHY_ADDR); break; #endif +#ifdef CONFIG_T1042RDB + case PHY_INTERFACE_MODE_SGMII: + /* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */ + if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i)) + fm_info_set_phy_address(i, 0); + /* T1042RDB only supports SGMII on DTSEC3 */ + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_SGMII1_PHY_ADDR); + break; +#endif case PHY_INTERFACE_MODE_RGMII: if (FM1_DTSEC4 == i) phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; diff --git a/board/freescale/t104xrdb/t1042_pi_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_rcw.cfg new file mode 100644 index 0000000..57de89a --- /dev/null +++ b/board/freescale/t104xrdb/t1042_pi_rcw.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +# serdes protocol 0x06 +0c18000e 0e000000 00000000 00000000 +06000002 00400002 e8106000 01000000 +00000000 00000000 00000000 00030810 +00000000 01fe0a06 00000000 00000000 diff --git a/board/freescale/t104xrdb/t1042_rcw.cfg b/board/freescale/t104xrdb/t1042_rcw.cfg index a3ea8ad..db4d52f 100644 --- a/board/freescale/t104xrdb/t1042_rcw.cfg +++ b/board/freescale/t104xrdb/t1042_rcw.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 010e0100 -# serdes protocol 0x66 +# serdes protocol 0x86 0c18000e 0e000000 00000000 00000000 -06000002 00400002 e8106000 01000000 -00000000 00000000 00000000 00030810 -00000000 01fe0a06 00000000 00000000 +86000002 80000002 ec027000 01000000 +00000000 00000000 00000000 00032810 +00000000 0342500f 00000000 00000000 diff --git a/board/freescale/t208xqds/MAINTAINERS b/board/freescale/t208xqds/MAINTAINERS index 643926f..deda092 100644 --- a/board/freescale/t208xqds/MAINTAINERS +++ b/board/freescale/t208xqds/MAINTAINERS @@ -1,5 +1,5 @@ T208XQDS BOARD -M: - +#M: - S: Maintained F: board/freescale/t208xqds/ F: include/configs/T208xQDS.h diff --git a/board/freescale/t208xrdb/MAINTAINERS b/board/freescale/t208xrdb/MAINTAINERS index 5987143..1642879 100644 --- a/board/freescale/t208xrdb/MAINTAINERS +++ b/board/freescale/t208xrdb/MAINTAINERS @@ -1,5 +1,5 @@ T208XRDB BOARD -M: - +#M: - S: Maintained F: board/freescale/t208xrdb/ F: include/configs/T208xRDB.h diff --git a/board/freescale/t4qds/MAINTAINERS b/board/freescale/t4qds/MAINTAINERS index da796bd..f88ee7d 100644 --- a/board/freescale/t4qds/MAINTAINERS +++ b/board/freescale/t4qds/MAINTAINERS @@ -1,5 +1,5 @@ T4QDS BOARD -M: - +#M: - S: Maintained F: board/freescale/t4qds/ F: include/configs/T4240QDS.h diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c index 4d09796..b634965 100644 --- a/board/freescale/vf610twr/vf610twr.c +++ b/board/freescale/vf610twr/vf610twr.c @@ -45,6 +45,7 @@ void setup_iomux_ddr(void) VF610_PAD_DDR_A3__DDR_A_3, VF610_PAD_DDR_A2__DDR_A_2, VF610_PAD_DDR_A1__DDR_A_1, + VF610_PAD_DDR_A0__DDR_A_0, VF610_PAD_DDR_BA2__DDR_BA_2, VF610_PAD_DDR_BA1__DDR_BA_1, VF610_PAD_DDR_BA0__DDR_BA_0, @@ -76,6 +77,7 @@ void setup_iomux_ddr(void) VF610_PAD_DDR_WE__DDR_WE_B, VF610_PAD_DDR_ODT1__DDR_ODT_0, VF610_PAD_DDR_ODT0__DDR_ODT_1, + VF610_PAD_DDR_RESETB, }; imx_iomux_v3_setup_multiple_pads(ddr_pads, ARRAY_SIZE(ddr_pads)); @@ -88,30 +90,30 @@ void ddr_phy_init(void) writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[0]); writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[16]); writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[32]); - writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[48]); writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[1]); writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[17]); - writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[33]); - writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[49]); writel(DDRMC_PHY_CTRL, &ddrmr->phy[2]); writel(DDRMC_PHY_CTRL, &ddrmr->phy[18]); writel(DDRMC_PHY_CTRL, &ddrmr->phy[34]); - writel(DDRMC_PHY_CTRL, &ddrmr->phy[50]); writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[3]); writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[19]); writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[35]); - writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[51]); writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[4]); writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[20]); writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[36]); - writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[52]); + + /* LPDDR2 only parameter */ + writel(DDRMC_PHY_OFF, &ddrmr->phy[49]); writel(DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE, &ddrmr->phy[50]); + + /* Processor Pad ODT settings */ + writel(DDRMC_PHY_PROC_PAD_ODT, &ddrmr->phy[52]); } void ddr_ctrl_init(void) @@ -120,12 +122,12 @@ void ddr_ctrl_init(void) writel(DDRMC_CR00_DRAM_CLASS_DDR3, &ddrmr->cr[0]); writel(DDRMC_CR02_DRAM_TINIT(32), &ddrmr->cr[2]); - writel(DDRMC_CR10_TRST_PWRON(124), &ddrmr->cr[10]); + writel(DDRMC_CR10_TRST_PWRON(80000), &ddrmr->cr[10]); - writel(DDRMC_CR11_CKE_INACTIVE(80000), &ddrmr->cr[11]); + writel(DDRMC_CR11_CKE_INACTIVE(200000), &ddrmr->cr[11]); writel(DDRMC_CR12_WRLAT(5) | DDRMC_CR12_CASLAT_LIN(12), &ddrmr->cr[12]); - writel(DDRMC_CR13_TRC(21) | DDRMC_CR13_TRRD(4) | DDRMC_CR13_TCCD(4) | - DDRMC_CR13_TBST_INT_INTERVAL(4), &ddrmr->cr[13]); + writel(DDRMC_CR13_TRC(21) | DDRMC_CR13_TRRD(4) | DDRMC_CR13_TCCD(4), + &ddrmr->cr[13]); writel(DDRMC_CR14_TFAW(20) | DDRMC_CR14_TRP(6) | DDRMC_CR14_TWTR(4) | DDRMC_CR14_TRAS_MIN(15), &ddrmr->cr[14]); writel(DDRMC_CR16_TMRD(4) | DDRMC_CR16_TRTP(4), &ddrmr->cr[16]); @@ -134,24 +136,23 @@ void ddr_ctrl_init(void) writel(DDRMC_CR18_TCKESR(4) | DDRMC_CR18_TCKE(3), &ddrmr->cr[18]); writel(DDRMC_CR20_AP_EN, &ddrmr->cr[20]); - writel(DDRMC_CR21_TRCD_INT(6) | DDRMC_CR21_TRAS_LOCKOUT | - DDRMC_CR21_CCMAP_EN, &ddrmr->cr[21]); + writel(DDRMC_CR21_TRCD_INT(6) | DDRMC_CR21_CCMAP_EN, &ddrmr->cr[21]); - writel(DDRMC_CR22_TDAL(11), &ddrmr->cr[22]); + writel(DDRMC_CR22_TDAL(12), &ddrmr->cr[22]); writel(DDRMC_CR23_BSTLEN(3) | DDRMC_CR23_TDLL(512), &ddrmr->cr[23]); writel(DDRMC_CR24_TRP_AB(6), &ddrmr->cr[24]); writel(DDRMC_CR25_TREF_EN, &ddrmr->cr[25]); - writel(DDRMC_CR26_TREF(3112) | DDRMC_CR26_TRFC(44), &ddrmr->cr[26]); - writel(DDRMC_CR28_TREF_INT(5), &ddrmr->cr[28]); + writel(DDRMC_CR26_TREF(3120) | DDRMC_CR26_TRFC(44), &ddrmr->cr[26]); + writel(DDRMC_CR28_TREF_INT(0), &ddrmr->cr[28]); writel(DDRMC_CR29_TPDEX(3), &ddrmr->cr[29]); writel(DDRMC_CR30_TXPDLL(10), &ddrmr->cr[30]); - writel(DDRMC_CR31_TXSNR(68) | DDRMC_CR31_TXSR(512), &ddrmr->cr[31]); + writel(DDRMC_CR31_TXSNR(48) | DDRMC_CR31_TXSR(468), &ddrmr->cr[31]); writel(DDRMC_CR33_EN_QK_SREF, &ddrmr->cr[33]); writel(DDRMC_CR34_CKSRX(5) | DDRMC_CR34_CKSRE(5), &ddrmr->cr[34]); - writel(DDRMC_CR38_FREQ_CHG_EN, &ddrmr->cr[38]); + writel(DDRMC_CR38_FREQ_CHG_EN(0), &ddrmr->cr[38]); writel(DDRMC_CR39_PHY_INI_COM(1024) | DDRMC_CR39_PHY_INI_STA(16) | DDRMC_CR39_FRQ_CH_DLLOFF(2), &ddrmr->cr[39]); @@ -164,37 +165,45 @@ void ddr_ctrl_init(void) writel(DDRMC_CR69_ZQ_ON_SREF_EX(2), &ddrmr->cr[69]); writel(DDRMC_CR70_REF_PER_ZQ(64), &ddrmr->cr[70]); - writel(DDRMC_CR72_ZQCS_ROTATE, &ddrmr->cr[72]); + writel(DDRMC_CR72_ZQCS_ROTATE(0), &ddrmr->cr[72]); writel(DDRMC_CR73_APREBIT(10) | DDRMC_CR73_COL_DIFF(1) | DDRMC_CR73_ROW_DIFF(3), &ddrmr->cr[73]); writel(DDRMC_CR74_BANKSPLT_EN | DDRMC_CR74_ADDR_CMP_EN | - DDRMC_CR74_CMD_AGE_CNT(255) | DDRMC_CR74_AGE_CNT(255), + DDRMC_CR74_CMD_AGE_CNT(64) | DDRMC_CR74_AGE_CNT(64), &ddrmr->cr[74]); writel(DDRMC_CR75_RW_PG_EN | DDRMC_CR75_RW_EN | DDRMC_CR75_PRI_EN | DDRMC_CR75_PLEN, &ddrmr->cr[75]); writel(DDRMC_CR76_NQENT_ACTDIS(3) | DDRMC_CR76_D_RW_G_BKCN(3) | - DDRMC_CR76_W2R_SPLT_EN | DDRMC_CR76_CS_EN, &ddrmr->cr[76]); + DDRMC_CR76_W2R_SPLT_EN, &ddrmr->cr[76]); writel(DDRMC_CR77_CS_MAP | DDRMC_CR77_DI_RD_INTLEAVE | DDRMC_CR77_SWAP_EN, &ddrmr->cr[77]); - writel(DDRMC_CR78_BUR_ON_FLY_BIT(12), &ddrmr->cr[78]); - writel(DDRMC_CR79_CTLUPD_AREF, &ddrmr->cr[79]); + writel(DDRMC_CR78_Q_FULLNESS(7) | DDRMC_CR78_BUR_ON_FLY_BIT(12), + &ddrmr->cr[78]); + writel(DDRMC_CR79_CTLUPD_AREF(0), &ddrmr->cr[79]); writel(DDRMC_CR82_INT_MASK, &ddrmr->cr[82]); - writel(DDRMC_CR87_ODT_WR_MAPCS0 | DDRMC_CR87_ODT_RD_MAPCS0, - &ddrmr->cr[87]); + writel(DDRMC_CR87_ODT_WR_MAPCS0, &ddrmr->cr[87]); writel(DDRMC_CR88_TODTL_CMD(4), &ddrmr->cr[88]); writel(DDRMC_CR89_AODT_RWSMCS(2), &ddrmr->cr[89]); writel(DDRMC_CR91_R2W_SMCSDL(2), &ddrmr->cr[91]); writel(DDRMC_CR96_WLMRD(40) | DDRMC_CR96_WLDQSEN(25), &ddrmr->cr[96]); + writel(DDRMC_CR97_WRLVL_EN, &ddrmr->cr[97]); + writel(DDRMC_CR98_WRLVL_DL_0, &ddrmr->cr[98]); + writel(DDRMC_CR99_WRLVL_DL_1, &ddrmr->cr[99]); + + writel(DDRMC_CR102_RDLVL_GT_REGEN | DDRMC_CR102_RDLVL_REG_EN, + &ddrmr->cr[102]); - writel(DDRMC_CR105_RDLVL_DL_0(32), &ddrmr->cr[105]); - writel(DDRMC_CR110_RDLVL_DL_1(32), &ddrmr->cr[110]); - writel(DDRMC_CR114_RDLVL_GTDL_2(8224), &ddrmr->cr[114]); + writel(DDRMC_CR105_RDLVL_DL_0(0), &ddrmr->cr[105]); + writel(DDRMC_CR106_RDLVL_GTDL_0(4), &ddrmr->cr[106]); + writel(DDRMC_CR110_RDLVL_GTDL_1(4), &ddrmr->cr[110]); + writel(DDRMC_CR114_RDLVL_GTDL_2(0), &ddrmr->cr[114]); + writel(DDRMC_CR115_RDLVL_GTDL_2(0), &ddrmr->cr[115]); - writel(DDRMC_CR117_AXI0_W_PRI(1) | DDRMC_CR117_AXI0_R_PRI(1), + writel(DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), &ddrmr->cr[117]); writel(DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), &ddrmr->cr[118]); @@ -205,23 +214,40 @@ void ddr_ctrl_init(void) &ddrmr->cr[121]); writel(DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) | DDRMC_CR122_AXI0_PRIRLX(100), &ddrmr->cr[122]); - writel(DDRMC_CR123_AXI1_PRI3_RPRI(1) | DDRMC_CR123_AXI1_PRI2_RPRI(1), - &ddrmr->cr[123]); + writel(DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) | + DDRMC_CR123_AXI1_PRI2_RPRI(1), &ddrmr->cr[123]); writel(DDRMC_CR124_AXI1_PRIRLX(100), &ddrmr->cr[124]); - writel(DDRMC_CR126_PHY_RDLAT(11), &ddrmr->cr[126]); + writel(DDRMC_CR126_PHY_RDLAT(8), &ddrmr->cr[126]); writel(DDRMC_CR132_WRLAT_ADJ(5) | DDRMC_CR132_RDLAT_ADJ(6), &ddrmr->cr[132]); + writel(DDRMC_CR137_PHYCTL_DL(2), &ddrmr->cr[137]); + writel(DDRMC_CR138_PHY_WRLV_MXDL(256) | DDRMC_CR138_PHYDRAM_CK_EN(1), + &ddrmr->cr[138]); writel(DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) | DDRMC_CR139_PHY_WRLV_DLL(3) | DDRMC_CR139_PHY_WRLV_EN(3), &ddrmr->cr[139]); + writel(DDRMC_CR140_PHY_WRLV_WW(64), &ddrmr->cr[140]); + writel(DDRMC_CR143_RDLV_GAT_MXDL(1536) | DDRMC_CR143_RDLV_MXDL(128), + &ddrmr->cr[143]); + writel(DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) | + DDRMC_CR144_PHY_RDLV_DLL(3) | DDRMC_CR144_PHY_RDLV_EN(3), + &ddrmr->cr[144]); + writel(DDRMC_CR145_PHY_RDLV_RR(64), &ddrmr->cr[145]); + writel(DDRMC_CR146_PHY_RDLVL_RESP(64), &ddrmr->cr[146]); + writel(DDRMC_CR147_RDLV_RESP_MASK(983040), &ddrmr->cr[147]); + writel(DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), &ddrmr->cr[148]); + writel(DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) | + DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), &ddrmr->cr[151]); writel(DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | - DDRMC_CR154_PAD_ZQ_MODE(1) | - DDRMC_CR154_DDR_SEL_PAD_CONTR(3), &ddrmr->cr[154]); - writel(DDRMC_CR155_AXI0_AWCACHE | DDRMC_CR155_PAD_ODT_BYTE1(2), + DDRMC_CR154_PAD_ZQ_MODE(1) | DDRMC_CR154_DDR_SEL_PAD_CONTR(3) | + DDRMC_CR154_PAD_ZQ_HW_FOR(1), &ddrmr->cr[154]); + writel(DDRMC_CR155_PAD_ODT_BYTE1(2) | DDRMC_CR155_PAD_ODT_BYTE0(2), &ddrmr->cr[155]); writel(DDRMC_CR158_TWR(6), &ddrmr->cr[158]); + writel(DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) | + DDRMC_CR161_TODTH_WR(2), &ddrmr->cr[161]); ddr_phy_init(); diff --git a/board/funkwerk/vovpn-gw/MAINTAINERS b/board/funkwerk/vovpn-gw/MAINTAINERS index 9af5f78..34d1cc12 100644 --- a/board/funkwerk/vovpn-gw/MAINTAINERS +++ b/board/funkwerk/vovpn-gw/MAINTAINERS @@ -1,5 +1,5 @@ VOVPN-GW BOARD -M: - +#M: - S: Maintained F: board/funkwerk/vovpn-gw/ F: include/configs/VoVPN-GW.h diff --git a/board/gaisler/gr_cpci_ax2000/MAINTAINERS b/board/gaisler/gr_cpci_ax2000/MAINTAINERS index 493c31e..df55a4c 100644 --- a/board/gaisler/gr_cpci_ax2000/MAINTAINERS +++ b/board/gaisler/gr_cpci_ax2000/MAINTAINERS @@ -1,5 +1,5 @@ GR_CPCI_AX2000 BOARD -M: - +#M: - S: Maintained F: board/gaisler/gr_cpci_ax2000/ F: include/configs/gr_cpci_ax2000.h diff --git a/board/gaisler/gr_ep2s60/MAINTAINERS b/board/gaisler/gr_ep2s60/MAINTAINERS index 151bef1..7acd5f4 100644 --- a/board/gaisler/gr_ep2s60/MAINTAINERS +++ b/board/gaisler/gr_ep2s60/MAINTAINERS @@ -1,5 +1,5 @@ GR_EP2S60 BOARD -M: - +#M: - S: Maintained F: board/gaisler/gr_ep2s60/ F: include/configs/gr_ep2s60.h diff --git a/board/gaisler/gr_xc3s_1500/MAINTAINERS b/board/gaisler/gr_xc3s_1500/MAINTAINERS index 187f323..c4179d2 100644 --- a/board/gaisler/gr_xc3s_1500/MAINTAINERS +++ b/board/gaisler/gr_xc3s_1500/MAINTAINERS @@ -1,5 +1,5 @@ GR_XC3S_1500 BOARD -M: - +#M: - S: Maintained F: board/gaisler/gr_xc3s_1500/ F: include/configs/gr_xc3s_1500.h diff --git a/board/gaisler/grsim/MAINTAINERS b/board/gaisler/grsim/MAINTAINERS index acb863c..4b3312e 100644 --- a/board/gaisler/grsim/MAINTAINERS +++ b/board/gaisler/grsim/MAINTAINERS @@ -1,5 +1,5 @@ GRSIM BOARD -M: - +#M: - S: Maintained F: board/gaisler/grsim/ F: include/configs/grsim.h diff --git a/board/gaisler/grsim_leon2/MAINTAINERS b/board/gaisler/grsim_leon2/MAINTAINERS index 6da9b78..bf4a950 100644 --- a/board/gaisler/grsim_leon2/MAINTAINERS +++ b/board/gaisler/grsim_leon2/MAINTAINERS @@ -1,5 +1,5 @@ GRSIM_LEON2 BOARD -M: - +#M: - S: Maintained F: board/gaisler/grsim_leon2/ F: include/configs/grsim_leon2.h diff --git a/board/galaxy5200/MAINTAINERS b/board/galaxy5200/MAINTAINERS index f070132..614625d 100644 --- a/board/galaxy5200/MAINTAINERS +++ b/board/galaxy5200/MAINTAINERS @@ -1,5 +1,5 @@ GALAXY5200 BOARD -M: Eric Millbrandt <emillbrandt@dekaresearch.com> +#M: Eric Millbrandt <emillbrandt@dekaresearch.com> S: Orphan (since 2014-06) F: board/galaxy5200/ F: include/configs/galaxy5200.h diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 8d086f8..1038d9d 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -356,9 +356,14 @@ iomux_v3_cfg_t const ecspi1_pads[] = { IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)), }; +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1; +} + static void setup_spi(void) { - gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1); + gpio_direction_output(IMX_GPIO_NR(3, 19), 1); SETUP_IOMUX_PADS(ecspi1_pads); } #endif diff --git a/board/genesi/mx51_efikamx/MAINTAINERS b/board/genesi/mx51_efikamx/MAINTAINERS index a85df77..f1398c4 100644 --- a/board/genesi/mx51_efikamx/MAINTAINERS +++ b/board/genesi/mx51_efikamx/MAINTAINERS @@ -1,5 +1,5 @@ MX51_EFIKAMX BOARD -M: - +#M: - S: Maintained F: board/genesi/mx51_efikamx/ F: include/configs/mx51_efikamx.h diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index 16769e5..137e4ed 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -152,6 +152,11 @@ static iomux_v3_cfg_t const efikamx_spi_pads[] = { * PMIC configuration */ #ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 1) ? 121 : -1; +} + static void power_init(void) { unsigned int val; diff --git a/board/icecube/MAINTAINERS b/board/icecube/MAINTAINERS index 02e6c04..8a24eb4 100644 --- a/board/icecube/MAINTAINERS +++ b/board/icecube/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/IceCube.h F: configs/icecube_5200_defconfig ICECUBE_5200_DDR BOARD -M: - +#M: - S: Maintained F: configs/icecube_5200_DDR_defconfig F: configs/icecube_5200_DDR_LOWBOOT_defconfig diff --git a/board/imx31_phycore/MAINTAINERS b/board/imx31_phycore/MAINTAINERS index efd5e77..41f6cae 100644 --- a/board/imx31_phycore/MAINTAINERS +++ b/board/imx31_phycore/MAINTAINERS @@ -1,11 +1,11 @@ IMX31_PHYCORE BOARD -M: - +#M: - S: Maintained F: board/imx31_phycore/ F: include/configs/imx31_phycore.h F: configs/imx31_phycore_defconfig IMX31_PHYCORE_EET BOARD -M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> +#M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> S: Orphan (since 2013-09) F: configs/imx31_phycore_eet_defconfig diff --git a/board/ip04/MAINTAINERS b/board/ip04/MAINTAINERS index 278072b..c37b011 100644 --- a/board/ip04/MAINTAINERS +++ b/board/ip04/MAINTAINERS @@ -1,5 +1,5 @@ IP04 BOARD -M: Brent Kandetzki <brentk@teleco.com> +#M: Brent Kandetzki <brentk@teleco.com> S: Orphan (since 2014-06) F: board/ip04/ F: include/configs/ip04.h diff --git a/board/isee/igep00x0/MAINTAINERS b/board/isee/igep00x0/MAINTAINERS index fe4a8cd..3fc2c6c 100644 --- a/board/isee/igep00x0/MAINTAINERS +++ b/board/isee/igep00x0/MAINTAINERS @@ -8,7 +8,7 @@ F: configs/igep0030_defconfig F: configs/igep0032_defconfig IGEP0020_NAND BOARD -M: - +#M: - S: Maintained F: configs/igep0020_nand_defconfig F: configs/igep0030_nand_defconfig diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds deleted file mode 100644 index 3d4fc8a..0000000 --- a/board/ivm/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/karo/tk71/MAINTAINERS b/board/karo/tk71/MAINTAINERS index 39b2b1d..ac85d6b 100644 --- a/board/karo/tk71/MAINTAINERS +++ b/board/karo/tk71/MAINTAINERS @@ -1,5 +1,5 @@ TK71 BOARD -M: - +#M: - S: Maintained F: board/karo/tk71/ F: include/configs/tk71.h diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds deleted file mode 100644 index 0eb2fba..0000000 --- a/board/kup/kup4k/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/logicpd/imx31_litekit/MAINTAINERS b/board/logicpd/imx31_litekit/MAINTAINERS index 98cc7bd..8e3608e 100644 --- a/board/logicpd/imx31_litekit/MAINTAINERS +++ b/board/logicpd/imx31_litekit/MAINTAINERS @@ -1,5 +1,5 @@ IMX31_LITEKIT BOARD -M: - +#M: - S: Maintained F: board/logicpd/imx31_litekit/ F: include/configs/imx31_litekit.h diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds deleted file mode 100644 index 90e2e2e..0000000 --- a/board/lwmon/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2001-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/manroland/hmi1001/MAINTAINERS b/board/manroland/hmi1001/MAINTAINERS index bdfdc01..a66a981 100644 --- a/board/manroland/hmi1001/MAINTAINERS +++ b/board/manroland/hmi1001/MAINTAINERS @@ -1,5 +1,5 @@ HMI1001 BOARD -M: - +#M: - S: Maintained F: board/manroland/hmi1001/ F: include/configs/hmi1001.h diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds deleted file mode 100644 index 47f2de8..0000000 --- a/board/manroland/uc100/u-boot.lds +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/matrix_vision/mergerbox/MAINTAINERS b/board/matrix_vision/mergerbox/MAINTAINERS index 22be981..20bd073 100644 --- a/board/matrix_vision/mergerbox/MAINTAINERS +++ b/board/matrix_vision/mergerbox/MAINTAINERS @@ -1,5 +1,5 @@ MERGERBOX BOARD -M: Andre Schwarz <andre.schwarz@matrix-vision.de> +#M: Andre Schwarz <andre.schwarz@matrix-vision.de> S: Orphan (since 2014-03) F: board/matrix_vision/mergerbox/ F: include/configs/MERGERBOX.h diff --git a/board/matrix_vision/mvbc_p/MAINTAINERS b/board/matrix_vision/mvbc_p/MAINTAINERS index 9e76b57..aad14ed 100644 --- a/board/matrix_vision/mvbc_p/MAINTAINERS +++ b/board/matrix_vision/mvbc_p/MAINTAINERS @@ -1,5 +1,5 @@ MVBC_P BOARD -M: Andre Schwarz <andre.schwarz@matrix-vision.de> +#M: Andre Schwarz <andre.schwarz@matrix-vision.de> S: Orphan (since 2014-03) F: board/matrix_vision/mvbc_p/ F: include/configs/MVBC_P.h diff --git a/board/matrix_vision/mvblm7/MAINTAINERS b/board/matrix_vision/mvblm7/MAINTAINERS index 4f7ca50..947a14e 100644 --- a/board/matrix_vision/mvblm7/MAINTAINERS +++ b/board/matrix_vision/mvblm7/MAINTAINERS @@ -1,5 +1,5 @@ MVBLM7 BOARD -M: Andre Schwarz <andre.schwarz@matrix-vision.de> +#M: Andre Schwarz <andre.schwarz@matrix-vision.de> S: Orphan (since 2014-03) F: board/matrix_vision/mvblm7/ F: include/configs/MVBLM7.h diff --git a/board/matrix_vision/mvsmr/MAINTAINERS b/board/matrix_vision/mvsmr/MAINTAINERS index 9659730..ae3cf9c 100644 --- a/board/matrix_vision/mvsmr/MAINTAINERS +++ b/board/matrix_vision/mvsmr/MAINTAINERS @@ -1,5 +1,5 @@ MVSMR BOARD -M: Andre Schwarz <andre.schwarz@matrix-vision.de> +#M: Andre Schwarz <andre.schwarz@matrix-vision.de> S: Orphan (since 2014-03) F: board/matrix_vision/mvsmr/ F: include/configs/MVSMR.h diff --git a/board/mcc200/MAINTAINERS b/board/mcc200/MAINTAINERS index 3d02bc6..a59a498 100644 --- a/board/mcc200/MAINTAINERS +++ b/board/mcc200/MAINTAINERS @@ -1,5 +1,5 @@ MCC200 BOARD -M: - +#M: - S: Maintained F: board/mcc200/ F: include/configs/mcc200.h diff --git a/board/micronas/vct/MAINTAINERS b/board/micronas/vct/MAINTAINERS index 4b825d3..cbaa585 100644 --- a/board/micronas/vct/MAINTAINERS +++ b/board/micronas/vct/MAINTAINERS @@ -1,5 +1,5 @@ VCT BOARD -M: - +#M: - S: Maintained F: board/micronas/vct/ F: include/configs/vct.h diff --git a/board/motionpro/MAINTAINERS b/board/motionpro/MAINTAINERS index 10a97cc..2f8b5cb 100644 --- a/board/motionpro/MAINTAINERS +++ b/board/motionpro/MAINTAINERS @@ -1,5 +1,5 @@ MOTIONPRO BOARD -M: - +#M: - S: Maintained F: board/motionpro/ F: include/configs/motionpro.h diff --git a/board/mpl/pati/MAINTAINERS b/board/mpl/pati/MAINTAINERS index f7c1bd8..19ad05d 100644 --- a/board/mpl/pati/MAINTAINERS +++ b/board/mpl/pati/MAINTAINERS @@ -1,5 +1,5 @@ PATI BOARD -M: - +#M: - S: Maintained F: board/mpl/pati/ F: include/configs/PATI.h diff --git a/board/munices/MAINTAINERS b/board/munices/MAINTAINERS index b8f5761..50d3e7e 100644 --- a/board/munices/MAINTAINERS +++ b/board/munices/MAINTAINERS @@ -1,5 +1,5 @@ MUNICES BOARD -M: - +#M: - S: Maintained F: board/munices/ F: include/configs/munices.h diff --git a/board/musenki/MAINTAINERS b/board/musenki/MAINTAINERS index 03a1fe7..4196c80 100644 --- a/board/musenki/MAINTAINERS +++ b/board/musenki/MAINTAINERS @@ -1,5 +1,5 @@ MUSENKI BOARD -M: Jim Thompson <jim@musenki.com> +#M: Jim Thompson <jim@musenki.com> S: Orphan (since 2014-04) F: board/musenki/ F: include/configs/MUSENKI.h diff --git a/board/mvblue/MAINTAINERS b/board/mvblue/MAINTAINERS index a809ba5..5955f1a 100644 --- a/board/mvblue/MAINTAINERS +++ b/board/mvblue/MAINTAINERS @@ -1,5 +1,5 @@ MVBLUE BOARD -M: - +#M: - S: Maintained F: board/mvblue/ F: include/configs/MVBLUE.h diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds deleted file mode 100644 index 0dff5a4..0000000 --- a/board/netvia/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/palmtreo680/MAINTAINERS b/board/palmtreo680/MAINTAINERS index bdc034e..b0ff9d0 100644 --- a/board/palmtreo680/MAINTAINERS +++ b/board/palmtreo680/MAINTAINERS @@ -1,5 +1,5 @@ PALMTREO680 BOARD -M: Mike Dunn <mikedunn@newsguy.com> +#M: Mike Dunn <mikedunn@newsguy.com> S: Orphan (since 2014-06) F: board/palmtreo680/ F: include/configs/palmtreo680.h diff --git a/board/pb1x00/MAINTAINERS b/board/pb1x00/MAINTAINERS index 6c5c2bb..8326cc7 100644 --- a/board/pb1x00/MAINTAINERS +++ b/board/pb1x00/MAINTAINERS @@ -1,5 +1,5 @@ PB1X00 BOARD -M: - +#M: - S: Maintained F: board/pb1x00/ F: include/configs/pb1x00.h diff --git a/board/pm828/MAINTAINERS b/board/pm828/MAINTAINERS index 767a84d..97c1ccc 100644 --- a/board/pm828/MAINTAINERS +++ b/board/pm828/MAINTAINERS @@ -1,5 +1,5 @@ PM828 BOARD -M: - +#M: - S: Maintained F: board/pm828/ F: include/configs/PM828.h diff --git a/board/ppmc7xx/MAINTAINERS b/board/ppmc7xx/MAINTAINERS index 5b21aa7..a0c1f44 100644 --- a/board/ppmc7xx/MAINTAINERS +++ b/board/ppmc7xx/MAINTAINERS @@ -1,5 +1,5 @@ PPMC7XX BOARD -M: - +#M: - S: Maintained F: board/ppmc7xx/ F: include/configs/ppmc7xx.h diff --git a/board/ppmc8260/MAINTAINERS b/board/ppmc8260/MAINTAINERS index 768d092..8b896af 100644 --- a/board/ppmc8260/MAINTAINERS +++ b/board/ppmc8260/MAINTAINERS @@ -1,5 +1,5 @@ PPMC8260 BOARD -M: Brad Kemp <Brad.Kemp@seranoa.com> +#M: Brad Kemp <Brad.Kemp@seranoa.com> S: Orphan (since 2014-04) F: board/ppmc8260/ F: include/configs/ppmc8260.h diff --git a/board/qemu-mips/MAINTAINERS b/board/qemu-mips/MAINTAINERS index 079949a..334f9d8 100644 --- a/board/qemu-mips/MAINTAINERS +++ b/board/qemu-mips/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/qemu-mips.h F: configs/qemu_mips_defconfig QEMU_MIPSEL BOARD -M: - +#M: - S: Maintained F: configs/qemu_mipsel_defconfig F: include/configs/qemu-mips64.h diff --git a/board/renesas/MigoR/MAINTAINERS b/board/renesas/MigoR/MAINTAINERS index 9368b05..21ee5e2 100644 --- a/board/renesas/MigoR/MAINTAINERS +++ b/board/renesas/MigoR/MAINTAINERS @@ -1,5 +1,5 @@ MIGOR BOARD -M: - +#M: - S: Maintained F: board/renesas/MigoR/ F: include/configs/MigoR.h diff --git a/board/renesas/rsk7269/MAINTAINERS b/board/renesas/rsk7269/MAINTAINERS index d3c77c3..698fbdb 100644 --- a/board/renesas/rsk7269/MAINTAINERS +++ b/board/renesas/rsk7269/MAINTAINERS @@ -1,5 +1,5 @@ RSK7269 BOARD -M: - +#M: - S: Maintained F: board/renesas/rsk7269/ F: include/configs/rsk7269.h diff --git a/board/renesas/sh7752evb/MAINTAINERS b/board/renesas/sh7752evb/MAINTAINERS index 8910669..9840477 100644 --- a/board/renesas/sh7752evb/MAINTAINERS +++ b/board/renesas/sh7752evb/MAINTAINERS @@ -1,5 +1,5 @@ SH7752EVB BOARD -M: - +#M: - S: Maintained F: board/renesas/sh7752evb/ F: include/configs/sh7752evb.h diff --git a/board/renesas/sh7753evb/MAINTAINERS b/board/renesas/sh7753evb/MAINTAINERS index 03e6c8c..b6c85ee 100644 --- a/board/renesas/sh7753evb/MAINTAINERS +++ b/board/renesas/sh7753evb/MAINTAINERS @@ -1,5 +1,5 @@ SH7753EVB BOARD -M: - +#M: - S: Maintained F: board/renesas/sh7753evb/ F: include/configs/sh7753evb.h diff --git a/board/renesas/sh7757lcr/MAINTAINERS b/board/renesas/sh7757lcr/MAINTAINERS index bbdd6d0..20aca67 100644 --- a/board/renesas/sh7757lcr/MAINTAINERS +++ b/board/renesas/sh7757lcr/MAINTAINERS @@ -1,5 +1,5 @@ SH7757LCR BOARD -M: - +#M: - S: Maintained F: board/renesas/sh7757lcr/ F: include/configs/sh7757lcr.h diff --git a/board/renesas/sh7785lcr/MAINTAINERS b/board/renesas/sh7785lcr/MAINTAINERS index 0d99de6..17578e0 100644 --- a/board/renesas/sh7785lcr/MAINTAINERS +++ b/board/renesas/sh7785lcr/MAINTAINERS @@ -1,5 +1,5 @@ SH7785LCR BOARD -M: - +#M: - S: Maintained F: board/renesas/sh7785lcr/ F: include/configs/sh7785lcr.h diff --git a/board/sacsng/MAINTAINERS b/board/sacsng/MAINTAINERS index c2c8ee3..b76e462 100644 --- a/board/sacsng/MAINTAINERS +++ b/board/sacsng/MAINTAINERS @@ -1,5 +1,5 @@ SACSNG BOARD -M: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com> +#M: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com> S: Orphan (since 2014-06) F: board/sacsng/ F: include/configs/sacsng.h diff --git a/board/sandbox/README.sandbox b/board/sandbox/README.sandbox index 529c447..5f879f5 100644 --- a/board/sandbox/README.sandbox +++ b/board/sandbox/README.sandbox @@ -19,7 +19,7 @@ create unit tests which we can run to test this upper level code. CONFIG_SANDBOX is defined when building a native board. The chosen vendor and board names are also 'sandbox', so there is a single -board in board/sandbox/sandbox. +board in board/sandbox. CONFIG_SANDBOX_BIG_ENDIAN should be defined when running on big-endian machines. @@ -32,7 +32,7 @@ Basic Operation To run sandbox U-Boot use something like: - make sandbox_config all + make sandbox_defconfig all ./u-boot Note: @@ -41,7 +41,7 @@ Note: build sandbox without SDL (i.e. no display/keyboard support) by removing the CONFIG_SANDBOX_SDL line in include/configs/sandbox.h or using: - make sandbox_config all NO_SDL=1 + make sandbox_defconfig all NO_SDL=1 ./u-boot diff --git a/board/sandburst/karef/MAINTAINERS b/board/sandburst/karef/MAINTAINERS index 4c29ae7..21510e8 100644 --- a/board/sandburst/karef/MAINTAINERS +++ b/board/sandburst/karef/MAINTAINERS @@ -1,5 +1,5 @@ KAREF BOARD -M: Travis Sawyer <travis.sawyer@sandburst.com> +#M: Travis Sawyer <travis.sawyer@sandburst.com> S: Orphan (since 2014-03) F: board/sandburst/karef/ F: include/configs/KAREF.h diff --git a/board/sandburst/metrobox/MAINTAINERS b/board/sandburst/metrobox/MAINTAINERS index f5734ba..71d18f9 100644 --- a/board/sandburst/metrobox/MAINTAINERS +++ b/board/sandburst/metrobox/MAINTAINERS @@ -1,5 +1,5 @@ METROBOX BOARD -M: Travis Sawyer <travis.sawyer@sandburst.com> +#M: Travis Sawyer <travis.sawyer@sandburst.com> S: Orphan (since 2014-03) F: board/sandburst/metrobox/ F: include/configs/METROBOX.h diff --git a/board/sandpoint/MAINTAINERS b/board/sandpoint/MAINTAINERS index f28c309..569cf42 100644 --- a/board/sandpoint/MAINTAINERS +++ b/board/sandpoint/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/Sandpoint8240.h F: configs/Sandpoint8240_defconfig SANDPOINT8245 BOARD -M: Jim Thompson <jim@musenki.com> +#M: Jim Thompson <jim@musenki.com> S: Orphan (since 2014-04) F: include/configs/Sandpoint8245.h F: configs/Sandpoint8245_defconfig diff --git a/board/sbc405/MAINTAINERS b/board/sbc405/MAINTAINERS index dbb4451..2abad25 100644 --- a/board/sbc405/MAINTAINERS +++ b/board/sbc405/MAINTAINERS @@ -1,5 +1,5 @@ SBC405 BOARD -M: - +#M: - S: Maintained F: board/sbc405/ F: include/configs/sbc405.h diff --git a/board/socrates/MAINTAINERS b/board/socrates/MAINTAINERS index fc3e11d..293b8e6 100644 --- a/board/socrates/MAINTAINERS +++ b/board/socrates/MAINTAINERS @@ -1,5 +1,5 @@ SOCRATES BOARD -M: - +#M: - S: Maintained F: board/socrates/ F: include/configs/socrates.h diff --git a/board/spear/spear300/MAINTAINERS b/board/spear/spear300/MAINTAINERS index 15164fe..07152ae 100644 --- a/board/spear/spear300/MAINTAINERS +++ b/board/spear/spear300/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/spear3xx_evb.h F: configs/spear300_defconfig SPEAR300_NAND BOARD -M: - +#M: - S: Maintained F: configs/spear300_nand_defconfig F: configs/spear300_usbtty_defconfig diff --git a/board/spear/spear310/MAINTAINERS b/board/spear/spear310/MAINTAINERS index 3a7e610..4f9aa15 100644 --- a/board/spear/spear310/MAINTAINERS +++ b/board/spear/spear310/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/spear3xx_evb.h F: configs/spear310_defconfig SPEAR310_NAND BOARD -M: - +#M: - S: Maintained F: configs/spear310_nand_defconfig F: configs/spear310_pnor_defconfig diff --git a/board/spear/spear320/MAINTAINERS b/board/spear/spear320/MAINTAINERS index 414beca..bf78092 100644 --- a/board/spear/spear320/MAINTAINERS +++ b/board/spear/spear320/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/spear3xx_evb.h F: configs/spear320_defconfig SPEAR320_NAND BOARD -M: - +#M: - S: Maintained F: configs/spear320_nand_defconfig F: configs/spear320_pnor_defconfig diff --git a/board/spear/spear600/MAINTAINERS b/board/spear/spear600/MAINTAINERS index a978fdd..ddcd11a 100644 --- a/board/spear/spear600/MAINTAINERS +++ b/board/spear/spear600/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/spear6xx_evb.h F: configs/spear600_defconfig SPEAR600_NAND BOARD -M: - +#M: - S: Maintained F: configs/spear600_nand_defconfig F: configs/spear600_usbtty_defconfig diff --git a/board/st-ericsson/u8500/MAINTAINERS b/board/st-ericsson/u8500/MAINTAINERS index 54e7921..e2581eb 100644 --- a/board/st-ericsson/u8500/MAINTAINERS +++ b/board/st-ericsson/u8500/MAINTAINERS @@ -1,5 +1,5 @@ U8500 BOARD -M: - +#M: - S: Maintained F: board/st-ericsson/u8500/ F: include/configs/u8500_href.h diff --git a/board/stx/stxgp3/MAINTAINERS b/board/stx/stxgp3/MAINTAINERS index 6f485d4..bd5743c 100644 --- a/board/stx/stxgp3/MAINTAINERS +++ b/board/stx/stxgp3/MAINTAINERS @@ -1,5 +1,5 @@ STXGP3 BOARD -M: Dan Malek <dan@embeddedalley.com> +#M: Dan Malek <dan@embeddedalley.com> S: Orphan (since 2014-06) F: board/stx/stxgp3/ F: include/configs/stxgp3.h diff --git a/board/stx/stxssa/MAINTAINERS b/board/stx/stxssa/MAINTAINERS index f56adf0..b7cc89b 100644 --- a/board/stx/stxssa/MAINTAINERS +++ b/board/stx/stxssa/MAINTAINERS @@ -1,5 +1,5 @@ STXSSA BOARD -M: Dan Malek <dan@embeddedalley.com> +#M: Dan Malek <dan@embeddedalley.com> S: Orphan (since 2014-06) F: board/stx/stxssa/ F: include/configs/stxssa.h diff --git a/board/tcm-bf518/MAINTAINERS b/board/tcm-bf518/MAINTAINERS index f649b06..1690122 100644 --- a/board/tcm-bf518/MAINTAINERS +++ b/board/tcm-bf518/MAINTAINERS @@ -1,5 +1,5 @@ TCM-BF518 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/tcm-bf518/ F: include/configs/tcm-bf518.h diff --git a/board/tcm-bf537/MAINTAINERS b/board/tcm-bf537/MAINTAINERS index 9ee557d..1cd4845 100644 --- a/board/tcm-bf537/MAINTAINERS +++ b/board/tcm-bf537/MAINTAINERS @@ -1,5 +1,5 @@ TCM-BF537 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/tcm-bf537/ F: include/configs/tcm-bf537.h diff --git a/board/ti/evm/MAINTAINERS b/board/ti/evm/MAINTAINERS index b2ebadc..d0b2788 100644 --- a/board/ti/evm/MAINTAINERS +++ b/board/ti/evm/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/omap3_evm.h F: configs/omap3_evm_defconfig OMAP3_EVM_QUICK_MMC BOARD -M: - +#M: - S: Maintained F: include/configs/omap3_evm_quick_mmc.h F: configs/omap3_evm_quick_mmc_defconfig diff --git a/board/ti/ti816x/MAINTAINERS b/board/ti/ti816x/MAINTAINERS index 8bf6122..d3de144 100644 --- a/board/ti/ti816x/MAINTAINERS +++ b/board/ti/ti816x/MAINTAINERS @@ -1,5 +1,5 @@ TI816X BOARD -M: - +#M: - S: Maintained F: board/ti/ti816x/ F: include/configs/ti816x_evm.h diff --git a/board/ti/tnetv107xevm/MAINTAINERS b/board/ti/tnetv107xevm/MAINTAINERS index 76ccfdc..8a92c6b 100644 --- a/board/ti/tnetv107xevm/MAINTAINERS +++ b/board/ti/tnetv107xevm/MAINTAINERS @@ -1,5 +1,5 @@ TNETV107XEVM BOARD -M: Chan-Taek Park <c-park@ti.com> +#M: Chan-Taek Park <c-park@ti.com> S: Orphan (since 2014-06) F: board/ti/tnetv107xevm/ F: include/configs/tnetv107x_evm.h diff --git a/board/total5200/MAINTAINERS b/board/total5200/MAINTAINERS index 983b96d..afb0058 100644 --- a/board/total5200/MAINTAINERS +++ b/board/total5200/MAINTAINERS @@ -1,5 +1,5 @@ TOTAL5200 BOARD -M: - +#M: - S: Maintained F: board/total5200/ F: include/configs/Total5200.h diff --git a/board/tqc/tqm5200/MAINTAINERS b/board/tqc/tqm5200/MAINTAINERS index 581ef95..d3eb543 100644 --- a/board/tqc/tqm5200/MAINTAINERS +++ b/board/tqc/tqm5200/MAINTAINERS @@ -1,5 +1,5 @@ TQM5200 BOARD -M: - +#M: - S: Maintained F: board/tqc/tqm5200/ F: include/configs/aev.h diff --git a/board/tqc/tqm8272/MAINTAINERS b/board/tqc/tqm8272/MAINTAINERS index a660de1..988d2b1 100644 --- a/board/tqc/tqm8272/MAINTAINERS +++ b/board/tqc/tqm8272/MAINTAINERS @@ -1,5 +1,5 @@ TQM8272 BOARD -M: - +#M: - S: Maintained F: board/tqc/tqm8272/ F: include/configs/TQM8272.h diff --git a/board/tqc/tqm834x/MAINTAINERS b/board/tqc/tqm834x/MAINTAINERS index 10c14f3..543ab1b 100644 --- a/board/tqc/tqm834x/MAINTAINERS +++ b/board/tqc/tqm834x/MAINTAINERS @@ -1,5 +1,5 @@ TQM834X BOARD -M: - +#M: - S: Maintained F: board/tqc/tqm834x/ F: include/configs/TQM834x.h diff --git a/board/tqc/tqm8xx/MAINTAINERS b/board/tqc/tqm8xx/MAINTAINERS index 161fa68..fe4a212 100644 --- a/board/tqc/tqm8xx/MAINTAINERS +++ b/board/tqc/tqm8xx/MAINTAINERS @@ -39,7 +39,7 @@ F: configs/virtlab2_defconfig F: configs/wtk_defconfig NSCU BOARD -M: - +#M: - S: Maintained F: include/configs/NSCU.h F: configs/NSCU_defconfig diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index b4d3994..b5249e7 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -144,6 +144,11 @@ static void setup_uart(void) } #ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 1) ? 121 : -1; +} + void spi_io_init(void) { static const iomux_v3_cfg_t spi_pads[] = { diff --git a/board/v38b/MAINTAINERS b/board/v38b/MAINTAINERS index 1b12d0b..d1a6ae6 100644 --- a/board/v38b/MAINTAINERS +++ b/board/v38b/MAINTAINERS @@ -1,5 +1,5 @@ V38B BOARD -M: - +#M: - S: Maintained F: board/v38b/ F: include/configs/v38b.h diff --git a/board/woodburn/MAINTAINERS b/board/woodburn/MAINTAINERS index 715f2ca..4fbf6bb 100644 --- a/board/woodburn/MAINTAINERS +++ b/board/woodburn/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/woodburn.h F: configs/woodburn_defconfig WOODBURN_SD BOARD -M: - +#M: - S: Maintained F: include/configs/woodburn_sd.h F: configs/woodburn_sd_defconfig diff --git a/board/xaeniax/MAINTAINERS b/board/xaeniax/MAINTAINERS index f2fa4bf..44bb588 100644 --- a/board/xaeniax/MAINTAINERS +++ b/board/xaeniax/MAINTAINERS @@ -1,5 +1,5 @@ XAENIAX BOARD -M: - +#M: - S: Maintained F: board/xaeniax/ F: include/configs/xaeniax.h diff --git a/board/xes/xpedite517x/MAINTAINERS b/board/xes/xpedite517x/MAINTAINERS index c74fdf4..035cb14 100644 --- a/board/xes/xpedite517x/MAINTAINERS +++ b/board/xes/xpedite517x/MAINTAINERS @@ -1,5 +1,5 @@ XPEDITE517X BOARD -M: - +#M: - S: Maintained F: board/xes/xpedite517x/ F: include/configs/xpedite517x.h diff --git a/board/xes/xpedite520x/MAINTAINERS b/board/xes/xpedite520x/MAINTAINERS index 7f9bf9a..2fd4ac0 100644 --- a/board/xes/xpedite520x/MAINTAINERS +++ b/board/xes/xpedite520x/MAINTAINERS @@ -1,5 +1,5 @@ XPEDITE520X BOARD -M: - +#M: - S: Maintained F: board/xes/xpedite520x/ F: include/configs/xpedite520x.h diff --git a/board/xes/xpedite537x/MAINTAINERS b/board/xes/xpedite537x/MAINTAINERS index a13dcf1..45a420d 100644 --- a/board/xes/xpedite537x/MAINTAINERS +++ b/board/xes/xpedite537x/MAINTAINERS @@ -1,5 +1,5 @@ XPEDITE537X BOARD -M: - +#M: - S: Maintained F: board/xes/xpedite537x/ F: include/configs/xpedite537x.h diff --git a/board/xes/xpedite550x/MAINTAINERS b/board/xes/xpedite550x/MAINTAINERS index 12d321e..b22f0e6 100644 --- a/board/xes/xpedite550x/MAINTAINERS +++ b/board/xes/xpedite550x/MAINTAINERS @@ -1,5 +1,5 @@ XPEDITE550X BOARD -M: - +#M: - S: Maintained F: board/xes/xpedite550x/ F: include/configs/xpedite550x.h diff --git a/common/Kconfig b/common/Kconfig new file mode 100644 index 0000000..216a8de --- /dev/null +++ b/common/Kconfig @@ -0,0 +1,34 @@ +menu "Command line interface" + depends on !SPL_BUILD + +config CMD_BOOTM + bool "Enable bootm command" + default y + help + Boot an application image from the memory. + +config CMD_CRC32 + bool "Enable crc32 command" + default y + help + Compute CRC32. + +config CMD_EXPORTENV + bool "Enable env export command" + default y + help + Export environments. + +config CMD_IMPORTENV + bool "Enable env import command" + default y + help + Import environments. + +config CMD_GO + bool "Enable go command" + default y + help + Start an application at a given address. + +endmenu diff --git a/common/Makefile b/common/Makefile index aca0f7f..b19d379 100644 --- a/common/Makefile +++ b/common/Makefile @@ -243,13 +243,8 @@ obj-y += cmd_nvedit.o #environment obj-y += env_common.o #others -ifdef CONFIG_DDR_SPD -SPD := y -endif -ifdef CONFIG_SPD_EEPROM -SPD := y -endif -obj-$(SPD) += ddr_spd.o +obj-$(CONFIG_DDR_SPD) += ddr_spd.o +obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o obj-$(CONFIG_HWCONFIG) += hwconfig.o obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o obj-y += console.o @@ -264,4 +259,10 @@ obj-$(CONFIG_IO_TRACE) += iotrace.o obj-y += memsize.o obj-y += stdio.o +# This option is not just y/n - it can have a numeric value +ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV +obj-y += aboot.o +obj-y += fb_mmc.o +endif + CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null) diff --git a/common/cmd_fastboot.c b/common/cmd_fastboot.c index 83fa7bd..909616d 100644 --- a/common/cmd_fastboot.c +++ b/common/cmd_fastboot.c @@ -30,7 +30,8 @@ static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) } U_BOOT_CMD( - fastboot, 1, 1, do_fastboot, - "fastboot - enter USB Fastboot protocol", - "" + fastboot, 1, 0, do_fastboot, + "use USB Fastboot protocol", + "\n" + " - run as a fastboot usb device" ); diff --git a/common/cmd_nand.c b/common/cmd_nand.c index f9ced9d..7f962dc 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -647,8 +647,6 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ printf("\nNAND %s: ", read ? "read" : "write"); - nand = &nand_info[dev]; - s = strchr(cmd, '.'); if (s && !strcmp(s, ".raw")) { @@ -657,6 +655,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (arg_off(argv[3], &dev, &off, &size, &maxsize)) return 1; + nand = &nand_info[dev]; + if (argc > 4 && !str2long(argv[4], &pagecount)) { printf("'%s' is not a number\n", argv[4]); return 1; @@ -679,6 +679,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) rwsize = size; } + nand = &nand_info[dev]; + if (!s || !strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i")) { if (read) diff --git a/common/cmd_sf.c b/common/cmd_sf.c index b4ceb71..c60e8d1 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -13,19 +13,6 @@ #include <asm/io.h> -#ifndef CONFIG_SF_DEFAULT_SPEED -# define CONFIG_SF_DEFAULT_SPEED 1000000 -#endif -#ifndef CONFIG_SF_DEFAULT_MODE -# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 -#endif -#ifndef CONFIG_SF_DEFAULT_CS -# define CONFIG_SF_DEFAULT_CS 0 -#endif -#ifndef CONFIG_SF_DEFAULT_BUS -# define CONFIG_SF_DEFAULT_BUS 0 -#endif - static struct spi_flash *flash; diff --git a/common/cmd_spi.c b/common/cmd_spi.c index 3c8e913..be5709c 100644 --- a/common/cmd_spi.c +++ b/common/cmd_spi.c @@ -11,6 +11,7 @@ #include <common.h> #include <command.h> +#include <errno.h> #include <spi.h> /*----------------------------------------------------------------------- @@ -38,6 +39,35 @@ static int bitlen; static uchar dout[MAX_SPI_BYTES]; static uchar din[MAX_SPI_BYTES]; +static int do_spi_xfer(int bus, int cs) +{ + struct spi_slave *slave; + int rcode = 0; + + slave = spi_setup_slave(bus, cs, 1000000, mode); + if (!slave) { + printf("Invalid device %d:%d\n", bus, cs); + return -EINVAL; + } + + spi_claim_bus(slave); + if (spi_xfer(slave, bitlen, dout, din, + SPI_XFER_BEGIN | SPI_XFER_END) != 0) { + printf("Error during SPI transaction\n"); + rcode = -EIO; + } else { + int j; + + for (j = 0; j < ((bitlen + 7) / 8); j++) + printf("%02X", din[j]); + printf("\n"); + } + spi_release_bus(slave); + spi_free_slave(slave); + + return rcode; +} + /* * SPI read/write * @@ -51,11 +81,9 @@ static uchar din[MAX_SPI_BYTES]; int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - struct spi_slave *slave; char *cp = 0; uchar tmp; int j; - int rcode = 0; /* * We use the last specified parameters, unless new ones are @@ -103,27 +131,10 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - slave = spi_setup_slave(bus, cs, 1000000, mode); - if (!slave) { - printf("Invalid device %d:%d\n", bus, cs); + if (do_spi_xfer(bus, cs)) return 1; - } - - spi_claim_bus(slave); - if(spi_xfer(slave, bitlen, dout, din, - SPI_XFER_BEGIN | SPI_XFER_END) != 0) { - printf("Error during SPI transaction\n"); - rcode = 1; - } else { - for(j = 0; j < ((bitlen + 7) / 8); j++) { - printf("%02X", din[j]); - } - printf("\n"); - } - spi_release_bus(slave); - spi_free_slave(slave); - return rcode; + return 0; } /***************************************************/ diff --git a/common/console.c b/common/console.c index 898da39..5a2f411 100644 --- a/common/console.c +++ b/common/console.c @@ -524,6 +524,7 @@ static int ctrlc_disabled = 0; /* see disable_ctrl() */ static int ctrlc_was_pressed = 0; int ctrlc(void) { +#ifndef CONFIG_SANDBOX if (!ctrlc_disabled && gd->have_console) { if (tstc()) { switch (getc()) { @@ -535,6 +536,8 @@ int ctrlc(void) } } } +#endif + return 0; } /* Reads user's confirmation. diff --git a/common/fb_mmc.c b/common/fb_mmc.c new file mode 100644 index 0000000..fb06d8a --- /dev/null +++ b/common/fb_mmc.c @@ -0,0 +1,92 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fb_mmc.h> +#include <part.h> +#include <aboot.h> +#include <sparse_format.h> + +/* The 64 defined bytes plus the '\0' */ +#define RESPONSE_LEN (64 + 1) + +static char *response_str; + +void fastboot_fail(const char *s) +{ + strncpy(response_str, "FAIL", 4); + strncat(response_str, s, RESPONSE_LEN - 4 - 1); +} + +void fastboot_okay(const char *s) +{ + strncpy(response_str, "OKAY", 4); + strncat(response_str, s, RESPONSE_LEN - 4 - 1); +} + +static void write_raw_image(block_dev_desc_t *dev_desc, disk_partition_t *info, + const char *part_name, void *buffer, + unsigned int download_bytes) +{ + lbaint_t blkcnt; + lbaint_t blks; + + /* determine number of blocks to write */ + blkcnt = ((download_bytes + (info->blksz - 1)) & ~(info->blksz - 1)); + blkcnt = blkcnt / info->blksz; + + if (blkcnt > info->size) { + error("too large for partition: '%s'\n", part_name); + fastboot_fail("too large for partition"); + return; + } + + puts("Flashing Raw Image\n"); + + blks = dev_desc->block_write(dev_desc->dev, info->start, blkcnt, + buffer); + if (blks != blkcnt) { + error("failed writing to device %d\n", dev_desc->dev); + fastboot_fail("failed writing to device"); + return; + } + + printf("........ wrote " LBAFU " bytes to '%s'\n", blkcnt * info->blksz, + part_name); + fastboot_okay(""); +} + +void fb_mmc_flash_write(const char *cmd, void *download_buffer, + unsigned int download_bytes, char *response) +{ + int ret; + block_dev_desc_t *dev_desc; + disk_partition_t info; + + /* initialize the response buffer */ + response_str = response; + + dev_desc = get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV); + if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) { + error("invalid mmc device\n"); + fastboot_fail("invalid mmc device"); + return; + } + + ret = get_partition_info_efi_by_name(dev_desc, cmd, &info); + if (ret) { + error("cannot find partition: '%s'\n", cmd); + fastboot_fail("cannot find partition"); + return; + } + + if (is_sparse_image(download_buffer)) + write_sparse_image(dev_desc, &info, cmd, download_buffer, + download_bytes); + else + write_raw_image(dev_desc, &info, cmd, download_buffer, + download_bytes); +} diff --git a/common/fdt_support.c b/common/fdt_support.c index 784a570..3f64156 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -930,15 +930,6 @@ void fdt_del_node_and_alias(void *blob, const char *alias) fdt_delprop(blob, off, alias); } -/* Helper to read a big number; size is in cells (not bytes) */ -static inline u64 of_read_number(const fdt32_t *cell, int size) -{ - u64 r = 0; - while (size--) - r = (r << 32) | fdt32_to_cpu(*(cell++)); - return r; -} - #define PRu64 "%llx" /* Max address size we deal with */ @@ -972,7 +963,7 @@ struct of_bus { }; /* Default translator (generic bus) */ -static void of_bus_default_count_cells(void *blob, int parentoffset, +void of_bus_default_count_cells(void *blob, int parentoffset, int *addrc, int *sizec) { const fdt32_t *prop; @@ -53,6 +53,10 @@ ifdef BOARD sinclude $(srctree)/board/$(BOARDDIR)/config.mk # include board specific rules endif +ifdef FTRACE +PLATFORM_CPPFLAGS += -finstrument-functions -DFTRACE +endif + ######################################################################### RELFLAGS := $(PLATFORM_RELFLAGS) diff --git a/configs/T1042RDB_defconfig b/configs/T1042RDB_defconfig new file mode 100644 index 0000000..85eceb9 --- /dev/null +++ b/configs/T1042RDB_defconfig @@ -0,0 +1,4 @@ +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index 00317c4..e257143 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT,ENABLE_VBOOT" +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="am335x-boneblack" diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 7ea5c0d..fc30508 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_ARNDALE=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale" diff --git a/configs/bct-brettl2_defconfig b/configs/bct-brettl2_defconfig index 3676306..26b145d 100644 --- a/configs/bct-brettl2_defconfig +++ b/configs/bct-brettl2_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BCT_BRETTL2=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 7c9d94b..ab615a8 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_BEAVER=y +CONFIG_DEFAULT_DEVICE_TREE="tegra30-beaver" diff --git a/configs/bf506f-ezkit_defconfig b/configs/bf506f-ezkit_defconfig index f81f412..f164e06 100644 --- a/configs/bf506f-ezkit_defconfig +++ b/configs/bf506f-ezkit_defconfig @@ -1,2 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF506F_EZKIT=y +# CONFIG_CMD_BOOTM is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set diff --git a/configs/bf518f-ezbrd_defconfig b/configs/bf518f-ezbrd_defconfig index a93eed0..fb35ad0 100644 --- a/configs/bf518f-ezbrd_defconfig +++ b/configs/bf518f-ezbrd_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF518F_EZBRD=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf526-ezbrd_defconfig b/configs/bf526-ezbrd_defconfig index 4a45223..da06d3a 100644 --- a/configs/bf526-ezbrd_defconfig +++ b/configs/bf526-ezbrd_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF526_EZBRD=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ad7160-eval_defconfig b/configs/bf527-ad7160-eval_defconfig index d9db715..47f53c9 100644 --- a/configs/bf527-ad7160-eval_defconfig +++ b/configs/bf527-ad7160-eval_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_AD7160_EVAL=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ezkit-v2_defconfig b/configs/bf527-ezkit-v2_defconfig index aedbb96..e250e10 100644 --- a/configs/bf527-ezkit-v2_defconfig +++ b/configs/bf527-ezkit-v2_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="BF527_EZKIT_REV_2_1" CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ezkit_defconfig b/configs/bf527-ezkit_defconfig index 3ed77a6..69f6ef7 100644 --- a/configs/bf527-ezkit_defconfig +++ b/configs/bf527-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-sdp_defconfig b/configs/bf527-sdp_defconfig index 0f8c28c..57f47e9 100644 --- a/configs/bf527-sdp_defconfig +++ b/configs/bf527-sdp_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_SDP=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf533-ezkit_defconfig b/configs/bf533-ezkit_defconfig index 217d4c3..57f8da1 100644 --- a/configs/bf533-ezkit_defconfig +++ b/configs/bf533-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF533_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf533-stamp_defconfig b/configs/bf533-stamp_defconfig index a99b3c7..1bcf3d3 100644 --- a/configs/bf533-stamp_defconfig +++ b/configs/bf533-stamp_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF533_STAMP=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf537-stamp_defconfig b/configs/bf537-stamp_defconfig index d9daf7e..9b9a92f 100644 --- a/configs/bf537-stamp_defconfig +++ b/configs/bf537-stamp_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_STAMP=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf538f-ezkit_defconfig b/configs/bf538f-ezkit_defconfig index 0507cb2..1892151 100644 --- a/configs/bf538f-ezkit_defconfig +++ b/configs/bf538f-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF538F_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf548-ezkit_defconfig b/configs/bf548-ezkit_defconfig index 7bb4064..5236984 100644 --- a/configs/bf548-ezkit_defconfig +++ b/configs/bf548-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF548_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf561-acvilon_defconfig b/configs/bf561-acvilon_defconfig index ba8a418..098f31f 100644 --- a/configs/bf561-acvilon_defconfig +++ b/configs/bf561-acvilon_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF561_ACVILON=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf561-ezkit_defconfig b/configs/bf561-ezkit_defconfig index 7ceb1d9..5665288 100644 --- a/configs/bf561-ezkit_defconfig +++ b/configs/bf561-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF561_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/br4_defconfig b/configs/br4_defconfig index 9d91933..5655d54 100644 --- a/configs/br4_defconfig +++ b/configs/br4_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BR4=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index bb042b4..4466e98 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_CARDHU=y +CONFIG_DEFAULT_DEVICE_TREE="tegra30-cardhu" diff --git a/configs/cm-bf527_defconfig b/configs/cm-bf527_defconfig index cb5110c..a6830b5 100644 --- a/configs/cm-bf527_defconfig +++ b/configs/cm-bf527_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF527=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf533_defconfig b/configs/cm-bf533_defconfig index aa38d0e..b9508ae 100644 --- a/configs/cm-bf533_defconfig +++ b/configs/cm-bf533_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF533=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf537e_defconfig b/configs/cm-bf537e_defconfig index b9deaae..a44eab7 100644 --- a/configs/cm-bf537e_defconfig +++ b/configs/cm-bf537e_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF537E=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf537u_defconfig b/configs/cm-bf537u_defconfig index 16f7ae1..29c33b9 100644 --- a/configs/cm-bf537u_defconfig +++ b/configs/cm-bf537u_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF537U=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf548_defconfig b/configs/cm-bf548_defconfig index e60306a..525f2e7 100644 --- a/configs/cm-bf548_defconfig +++ b/configs/cm-bf548_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF548=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf561_defconfig b/configs/cm-bf561_defconfig index 1b9301c..062bfeb 100644 --- a/configs/cm-bf561_defconfig +++ b/configs/cm-bf561_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF561=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/colibri_t20_iris_defconfig b/configs/colibri_t20_iris_defconfig index b2a21e1..b76f78b 100644 --- a/configs/colibri_t20_iris_defconfig +++ b/configs/colibri_t20_iris_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_COLIBRI_T20_IRIS=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri_t20_iris" diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index abb41f3..b955303 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_COLIBRI_T30=y +CONFIG_DEFAULT_DEVICE_TREE="tegra30-colibri" diff --git a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig index be1a371..c8695ab 100644 --- a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig +++ b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig @@ -2,3 +2,4 @@ CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP" CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y +# CONFIG_CMD_BOOTM is not set diff --git a/configs/controlcenterd_TRAILBLAZER_defconfig b/configs/controlcenterd_TRAILBLAZER_defconfig index ab548a6..730b96e 100644 --- a/configs/controlcenterd_TRAILBLAZER_defconfig +++ b/configs/controlcenterd_TRAILBLAZER_defconfig @@ -2,3 +2,4 @@ CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH" CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y +# CONFIG_CMD_BOOTM is not set diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig index a06c527..6249db7 100644 --- a/configs/coreboot-x86_defconfig +++ b/configs/coreboot-x86_defconfig @@ -1,3 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x01110000" CONFIG_X86=y CONFIG_TARGET_COREBOOT=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="link" diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 70677aa..f704c75 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA114=y +S:CONFIG_TARGET_DALMORE=y +CONFIG_DEFAULT_DEVICE_TREE="tegra114-dalmore" diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index a52231b..d99b429 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_HARMONY=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-harmony" diff --git a/configs/ip04_defconfig b/configs/ip04_defconfig index 4f9895a..ba737ae 100644 --- a/configs/ip04_defconfig +++ b/configs/ip04_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_IP04=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index 00eac92..ef1d41c 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA124=y +S:CONFIG_TARGET_JETSON_TK1=y +CONFIG_DEFAULT_DEVICE_TREE="tegra124-jetson-tk1" diff --git a/configs/kwb_defconfig b/configs/kwb_defconfig index 5082ff7..106a24f 100644 --- a/configs/kwb_defconfig +++ b/configs/kwb_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +S:CONFIG_ARM=y +S:CONFIG_TARGET_KWB=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig new file mode 100644 index 0000000..3c57481 --- /dev/null +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" +CONFIG_ARM=y +CONFIG_TARGET_LS1021AQDS=y diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index e9a3930..35963e9 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_MEDCOM_WIDE=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide" diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 7f23786..5cfd596 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -1,3 +1,6 @@ CONFIG_SPL=y +S:CONFIG_MICROBLAZE=y +S:CONFIG_TARGET_MICROBLAZE_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y +CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index a1c7ac5..a842837 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ODROID=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid" diff --git a/configs/origen_defconfig b/configs/origen_defconfig index aa92381..2a7f83b 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_ORIGEN=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4210-origen" diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index 05974eb..d2d36a5 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_PAZ00=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-paz00" diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index 797d5e0..b944b3b 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_PEACH_PIT=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit" diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig new file mode 100644 index 0000000..53f3126 --- /dev/null +++ b/configs/ph1_ld4_defconfig @@ -0,0 +1,8 @@ +CONFIG_SPL=y ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_UNIPHIER=y ++S:CONFIG_MACH_PH1_LD4=y +CONFIG_NAND_DENALI=y +CONFIG_SYS_NAND_DENALI_64BIT=y +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +S:CONFIG_SPL_NAND_DENALI=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig new file mode 100644 index 0000000..209466e --- /dev/null +++ b/configs/ph1_pro4_defconfig @@ -0,0 +1,8 @@ +CONFIG_SPL=y ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_UNIPHIER=y ++S:CONFIG_MACH_PH1_PRO4=y +CONFIG_NAND_DENALI=y +CONFIG_SYS_NAND_DENALI_64BIT=y +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +S:CONFIG_SPL_NAND_DENALI=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig new file mode 100644 index 0000000..658977b --- /dev/null +++ b/configs/ph1_sld8_defconfig @@ -0,0 +1,8 @@ +CONFIG_SPL=y ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_UNIPHIER=y ++S:CONFIG_MACH_PH1_SLD8=y +CONFIG_NAND_DENALI=y +CONFIG_SYS_NAND_DENALI_64BIT=y +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +S:CONFIG_SPL_NAND_DENALI=y diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 60e80ff..d2743b8 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_PLUTUX=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-plutux" diff --git a/configs/pr1_defconfig b/configs/pr1_defconfig index a8784c1..793a4e8 100644 --- a/configs/pr1_defconfig +++ b/configs/pr1_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_PR1=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index a9a3446..cdce39f 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_S5PC210_UNIVERSAL=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210" diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index e69de29..47d8400 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -0,0 +1,3 @@ +CONFIG_OF_CONTROL=y +CONFIG_OF_HOSTFILE=y +CONFIG_DEFAULT_DEVICE_TREE="sandbox" diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 516e760..ddf2cd6 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_SEABOARD=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard" diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index 465a75a..9b76d0d 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_SMDK5250=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250" diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index 9dc43f2..8cf673d 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_SMDK5420=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420" diff --git a/configs/snow_defconfig b/configs/snow_defconfig index 2d59046..14ed793 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_SNOW=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" diff --git a/configs/tcm-bf518_defconfig b/configs/tcm-bf518_defconfig index a9d5da0..0c9ae4d 100644 --- a/configs/tcm-bf518_defconfig +++ b/configs/tcm-bf518_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_TCM_BF518=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/tcm-bf537_defconfig b/configs/tcm-bf537_defconfig index fe9de13..6d604b6 100644 --- a/configs/tcm-bf537_defconfig +++ b/configs/tcm-bf537_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_TCM_BF537=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index e4a31cc..fabd34a 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_TEC_NG=y +CONFIG_DEFAULT_DEVICE_TREE="tegra30-tec-ng" diff --git a/configs/tec_defconfig b/configs/tec_defconfig index 62a9542..d3cafa7 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_TEC=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-tec" diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index fa82724..1b98b73 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS2=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" diff --git a/configs/trats_defconfig b/configs/trats_defconfig index f888a51..901a014 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index 94f23e3..0b2a6d0 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_TRIMSLICE=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice" diff --git a/configs/tseries_mmc_defconfig b/configs/tseries_mmc_defconfig index ea70705..6eda869 100644 --- a/configs/tseries_mmc_defconfig +++ b/configs/tseries_mmc_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" +S:CONFIG_ARM=y +S:CONFIG_TARGET_TSERIES=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/tseries_nand_defconfig b/configs/tseries_nand_defconfig index 599d52c..bd06d83 100644 --- a/configs/tseries_nand_defconfig +++ b/configs/tseries_nand_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" +S:CONFIG_ARM=y +S:CONFIG_TARGET_TSERIES=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig index 7e57020..32ccc4e 100644 --- a/configs/tseries_spi_defconfig +++ b/configs/tseries_spi_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" +S:CONFIG_ARM=y +S:CONFIG_TARGET_TSERIES=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinum_onenand_small_defconfig b/configs/vct_platinum_onenand_small_defconfig index f7b3a91..58c7995 100644 --- a/configs/vct_platinum_onenand_small_defconfig +++ b/configs/vct_platinum_onenand_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinum_small_defconfig b/configs/vct_platinum_small_defconfig index 15eef48..f4f56c4 100644 --- a/configs/vct_platinum_small_defconfig +++ b/configs/vct_platinum_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUM,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinumavc_onenand_small_defconfig b/configs/vct_platinumavc_onenand_small_defconfig index e0e8e44..31b4c9a 100644 --- a/configs/vct_platinumavc_onenand_small_defconfig +++ b/configs/vct_platinumavc_onenand_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinumavc_small_defconfig b/configs/vct_platinumavc_small_defconfig index d8209d1..23f6561 100644 --- a/configs/vct_platinumavc_small_defconfig +++ b/configs/vct_platinumavc_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUMAVC,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_premium_onenand_small_defconfig b/configs/vct_premium_onenand_small_defconfig index 220f875..354793e 100644 --- a/configs/vct_premium_onenand_small_defconfig +++ b/configs/vct_premium_onenand_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_premium_small_defconfig b/configs/vct_premium_small_defconfig index 5335472..a23ddb7 100644 --- a/configs/vct_premium_small_defconfig +++ b/configs/vct_premium_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PREMIUM,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index dfc5407..c12dae9 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA124=y +S:CONFIG_TARGET_VENICE2=y +CONFIG_DEFAULT_DEVICE_TREE="tegra124-venice2" diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 845e241..f62ab6b 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_VENTANA=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-ventana" diff --git a/configs/vexpress_aemv8a_defconfig b/configs/vexpress_aemv8a_defconfig index 9e0a175..b463a33 100644 --- a/configs/vexpress_aemv8a_defconfig +++ b/configs/vexpress_aemv8a_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS_AEMV8A=y +CONFIG_DEFAULT_DEVICE_TREE="vexpress64" diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 8fdf4e0..0035ccd 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SEMIHOSTING,BASE_FVP" CONFIG_ARM=y CONFIG_TARGET_VEXPRESS_AEMV8A=y +CONFIG_DEFAULT_DEVICE_TREE="vexpress64" diff --git a/configs/whistler_defconfig b/configs/whistler_defconfig index 8c07c18..9553eb8 100644 --- a/configs/whistler_defconfig +++ b/configs/whistler_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_WHISTLER=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-whistler" diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 3aedb35..9588849 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_MICROZED=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-microzed" diff --git a/configs/zynq_zc70x_defconfig b/configs/zynq_zc70x_defconfig index 04c8def..cf50730 100644 --- a/configs/zynq_zc70x_defconfig +++ b/configs/zynq_zc70x_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC70X=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702" diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 1178b40..8bb405d 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -3,3 +3,5 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010" +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010" diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 52c2121..0ba5da5 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -3,3 +3,5 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012" diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index 836809a..13f8112 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -3,3 +3,5 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013" +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013" diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 2337906..eb057fa 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZED=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zed" diff --git a/disk/part.c b/disk/part.c index ecc5e7e..cfd77b0 100644 --- a/disk/part.c +++ b/disk/part.c @@ -133,7 +133,7 @@ typedef lbaint_t lba512_t; * Overflowless variant of (block_count * mul_by / div_by) * when div_by > mul_by */ -static lba512_t lba512_muldiv (lba512_t block_count, lba512_t mul_by, lba512_t div_by) +static lba512_t lba512_muldiv(lba512_t block_count, lba512_t mul_by, lba512_t div_by) { lba512_t bc_quot, bc_rem; @@ -215,7 +215,8 @@ void dev_print (block_dev_desc_t *dev_desc) lba512 = (lba * (dev_desc->blksz/512)); /* round to 1 digit */ - mb = lba512_muldiv(lba512, 10, 2048); /* 2048 = (1024 * 1024) / 512 MB */ + /* 2048 = (1024 * 1024) / 512 MB */ + mb = lba512_muldiv(lba512, 10, 2048); mb_quot = mb / 10; mb_rem = mb - (10 * mb_quot); @@ -248,7 +249,7 @@ void dev_print (block_dev_desc_t *dev_desc) #ifdef HAVE_BLOCK_DEVICE -void init_part (block_dev_desc_t * dev_desc) +void init_part(block_dev_desc_t *dev_desc) { #ifdef CONFIG_ISO_PARTITION if (test_part_iso(dev_desc) == 0) { @@ -295,7 +296,7 @@ void init_part (block_dev_desc_t * dev_desc) defined(CONFIG_AMIGA_PARTITION) || \ defined(CONFIG_EFI_PARTITION) -static void print_part_header (const char *type, block_dev_desc_t * dev_desc) +static void print_part_header(const char *type, block_dev_desc_t *dev_desc) { puts ("\nPartition Map for "); switch (dev_desc->if_type) { diff --git a/doc/README.android-fastboot b/doc/README.android-fastboot index 4045727..1677609 100644 --- a/doc/README.android-fastboot +++ b/doc/README.android-fastboot @@ -6,8 +6,9 @@ Overview The protocol that is used over USB is described in README.android-fastboot-protocol in same directory. -The current implementation does not yet support the flash and erase -commands. +The current implementation does not yet support the erase command or the +"oem format" command, and there is minimal support for the flash command; +it only supports eMMC devices. Client installation =================== diff --git a/doc/README.clang b/doc/README.clang index 9ad689f..52495d3 100644 --- a/doc/README.clang +++ b/doc/README.clang @@ -34,21 +34,21 @@ make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrat FreeBSD 11 (Current): -------------------- Since llvm 3.4 is currently in the base system, the integrated as is -incapable of building U-Boot. Therefore gas from devel/arm-eabi-binutils +incapable of building U-Boot. Therefore gas from devel/arm-gnueabi-binutils is used instead. It needs a symlinks to be picked up correctly though: -ln -s /usr/local/bin/arm-eabi-as /usr/bin/arm-freebsd-eabi-as +ln -s /usr/local/bin/arm-gnueabi-freebsd-as /usr/bin/arm-freebsd-eabi-as # The following commands compile U-Boot using the clang xdev toolchain. # NOTE: CROSS_COMPILE and target differ on purpose! -export CROSS_COMPILE=arm-eabi- +export CROSS_COMPILE=arm-gnueabi-freebsd- gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_b_defconfig gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" -j8 Given that u-boot will default to gcc, above commands can be simplified with a simple wrapper script, listed below. -/usr/local/bin/arm-eabi-gcc +/usr/local/bin/arm-gnueabi-freebsd-gcc --- #!/bin/sh diff --git a/doc/git-mailrc b/doc/git-mailrc index 0fba100..35f2eb2 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -63,6 +63,7 @@ alias sunxi uboot, ijc, jwrdegoede alias tegra uboot, sjg, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com> alias tegra2 tegra alias ti uboot, trini +alias uniphier uboot, masahiro alias zynq uboot, monstr alias avr32 uboot, abiessmann diff --git a/drivers/Kconfig b/drivers/Kconfig new file mode 100644 index 0000000..128736d --- /dev/null +++ b/drivers/Kconfig @@ -0,0 +1,51 @@ +menu "Device Drivers" + +source "drivers/core/Kconfig" + +source "drivers/pci/Kconfig" + +source "drivers/pcmcia/Kconfig" + +source "drivers/mtd/Kconfig" + +source "drivers/block/Kconfig" + +source "drivers/misc/Kconfig" + +source "drivers/net/Kconfig" + +source "drivers/input/Kconfig" + +source "drivers/serial/Kconfig" + +source "drivers/tpm/Kconfig" + +source "drivers/i2c/Kconfig" + +source "drivers/spi/Kconfig" + +source "drivers/gpio/Kconfig" + +source "drivers/power/Kconfig" + +source "drivers/hwmon/Kconfig" + +source "drivers/watchdog/Kconfig" + +source "drivers/video/Kconfig" + +source "drivers/sound/Kconfig" + +source "drivers/usb/Kconfig" + +source "drivers/dfu/Kconfig" + +source "drivers/mmc/Kconfig" + +source "drivers/rtc/Kconfig" + +source "drivers/dma/Kconfig" + +source "drivers/crypto/Kconfig" + +endmenu diff --git a/drivers/Makefile b/drivers/Makefile index b22b109..d8361d9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -1,3 +1,5 @@ +obj-$(CONFIG_DM) += core/ +obj-$(CONFIG_DM_DEMO) += demo/ obj-$(CONFIG_BIOSEMU) += bios_emulator/ obj-y += block/ obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/ @@ -16,3 +18,4 @@ obj-y += watchdog/ obj-$(CONFIG_QE) += qe/ obj-y += memory/ obj-y += pwm/ +obj-y += input/ diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/block/Kconfig diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/core/Kconfig diff --git a/drivers/core/Makefile b/drivers/core/Makefile index 90b2a7f..c7905b1 100644 --- a/drivers/core/Makefile +++ b/drivers/core/Makefile @@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_DM) := device.o lists.o root.o uclass.o util.o +obj-y := device.o lists.o root.o uclass.o util.o diff --git a/drivers/core/device.c b/drivers/core/device.c index 166b073..32e80e8 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -106,13 +106,18 @@ int device_bind(struct udevice *parent, struct driver *drv, const char *name, * a 'requested' sequence, and will be resolved (and ->seq updated) * when the device is probed. */ - dev->req_seq = fdtdec_get_int(gd->fdt_blob, of_offset, "reg", -1); dev->seq = -1; +#ifdef CONFIG_OF_CONTROL + dev->req_seq = fdtdec_get_int(gd->fdt_blob, of_offset, "reg", -1); + if (!IS_ERR_VALUE(dev->req_seq)) + dev->req_seq &= INT_MAX; if (uc->uc_drv->name && of_offset != -1) { fdtdec_get_alias_seq(gd->fdt_blob, uc->uc_drv->name, of_offset, &dev->req_seq); } - +#else + dev->req_seq = -1; +#endif if (!dev->platdata && drv->platdata_auto_alloc_size) dev->flags |= DM_FLAG_ALLOC_PDATA; diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/crypto/Kconfig diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index d9cac22..9a156bf 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -297,10 +297,13 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, unsigned char taxpd_mclk = 0; /* Mode register set cycle time (tMRD). */ unsigned char tmrd_mclk; +#if defined(CONFIG_SYS_FSL_DDR4) || defined(CONFIG_SYS_FSL_DDR3) + const unsigned int mclk_ps = get_memory_clk_period_ps(); +#endif #ifdef CONFIG_SYS_FSL_DDR4 /* tXP=max(4nCK, 6ns) */ - int txp = max((get_memory_clk_period_ps() * 4), 6000); /* unit=ps */ + int txp = max(mclk_ps * 4, 6000); /* unit=ps */ trwt_mclk = 2; twrt_mclk = 1; act_pd_exit_mclk = picos_to_mclk(txp); @@ -311,16 +314,19 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, */ tmrd_mclk = max(24, picos_to_mclk(15000)); #elif defined(CONFIG_SYS_FSL_DDR3) + unsigned int data_rate = get_ddr_freq(0); + int txp; /* * (tXARD and tXARDS). Empirical? * The DDR3 spec has not tXARD, * we use the tXP instead of it. - * tXP=max(3nCK, 7.5ns) for DDR3. + * tXP=max(3nCK, 7.5ns) for DDR3-800, 1066 + * max(3nCK, 6ns) for DDR3-1333, 1600, 1866, 2133 * spec has not the tAXPD, we use * tAXPD=1, need design to confirm. */ - int txp = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ - unsigned int data_rate = get_ddr_freq(0); + txp = max(mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000)); + tmrd_mclk = 4; /* set the turnaround time */ @@ -578,6 +584,9 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned char cke_pls; /* Window for four activates (tFAW) */ unsigned short four_act; +#ifdef CONFIG_SYS_FSL_DDR3 + const unsigned int mclk_ps = get_memory_clk_period_ps(); +#endif /* FIXME add check that this must be less than acttorw_mclk */ add_lat_mclk = additive_latency; @@ -619,10 +628,17 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, #ifdef CONFIG_SYS_FSL_DDR4 cpo = 0; cke_pls = max(3, picos_to_mclk(5000)); +#elif defined(CONFIG_SYS_FSL_DDR3) + /* + * cke pulse = max(3nCK, 7.5ns) for DDR3-800 + * max(3nCK, 5.625ns) for DDR3-1066, 1333 + * max(3nCK, 5ns) for DDR3-1600, 1866, 2133 + */ + cke_pls = max(3, picos_to_mclk(mclk_ps > 1870 ? 7500 : + (mclk_ps > 1245 ? 5625 : 5000))); #else - cke_pls = picos_to_mclk(popts->tcke_clock_pulse_width_ps); + cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR; #endif - four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps); ddr->timing_cfg_2 = (0 @@ -1886,9 +1902,12 @@ static void set_timing_cfg_9(fsl_ddr_cfg_regs_t *ddr) debug("FSLDDR: timing_cfg_9 = 0x%08x\n", ddr->timing_cfg_9); } +/* This function needs to be called after set_ddr_sdram_cfg() is called */ static void set_ddr_dq_mapping(fsl_ddr_cfg_regs_t *ddr, const dimm_params_t *dimm_params) { + unsigned int acc_ecc_en = (ddr->ddr_sdram_cfg >> 2) & 0x1; + ddr->dq_map_0 = ((dimm_params->dq_mapping[0] & 0x3F) << 26) | ((dimm_params->dq_mapping[1] & 0x3F) << 20) | ((dimm_params->dq_mapping[2] & 0x3F) << 14) | @@ -1907,9 +1926,11 @@ static void set_ddr_dq_mapping(fsl_ddr_cfg_regs_t *ddr, ((dimm_params->dq_mapping[15] & 0x3F) << 8) | ((dimm_params->dq_mapping[16] & 0x3F) << 2); + /* dq_map for ECC[4:7] is set to 0 if accumulated ECC is enabled */ ddr->dq_map_3 = ((dimm_params->dq_mapping[17] & 0x3F) << 26) | ((dimm_params->dq_mapping[8] & 0x3F) << 20) | - ((dimm_params->dq_mapping[9] & 0x3F) << 14) | + (acc_ecc_en ? 0 : + (dimm_params->dq_mapping[9] & 0x3F) << 14) | dimm_params->dq_mapping_ors; debug("FSLDDR: dq_map_0 = 0x%08x\n", ddr->dq_map_0); @@ -2276,7 +2297,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, if (ip_rev > 0x40400) unq_mrs_en = 1; - if (ip_rev > 0x40700) + if ((ip_rev > 0x40700) && (popts->cswl_override != 0)) ddr->debug[18] = popts->cswl_override; set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en); diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c index 4745b7f..2418dca 100644 --- a/drivers/ddr/fsl/ddr4_dimm_params.c +++ b/drivers/ddr/fsl/ddr4_dimm_params.c @@ -113,7 +113,7 @@ compute_ranksize(const struct ddr4_spd_eeprom_s *spd) #define spd_to_ps(mtb, ftb) \ (mtb * pdimm->mtb_ps + (ftb * pdimm->ftb_10th_ps) / 10) /* - * ddr_compute_dimm_parameters for DDR3 SPD + * ddr_compute_dimm_parameters for DDR4 SPD * * Compute DIMM parameters based upon the SPD information in spd. * Writes the results to the dimm_params_t structure pointed by pdimm. @@ -165,17 +165,17 @@ ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd, + pdimm->ec_sdram_width; pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); - /* These are the types defined by the JEDEC DDR3 SPD spec */ + /* These are the types defined by the JEDEC SPD spec */ pdimm->mirrored_dimm = 0; pdimm->registered_dimm = 0; - switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) { - case DDR3_SPD_MODULETYPE_RDIMM: + switch (spd->module_type & DDR4_SPD_MODULETYPE_MASK) { + case DDR4_SPD_MODULETYPE_RDIMM: /* Registered/buffered DIMMs */ pdimm->registered_dimm = 1; break; - case DDR3_SPD_MODULETYPE_UDIMM: - case DDR3_SPD_MODULETYPE_SO_DIMM: + case DDR4_SPD_MODULETYPE_UDIMM: + case DDR4_SPD_MODULETYPE_SO_DIMM: /* Unbuffered DIMMs */ if (spd->mod_section.unbuffered.addr_mapping & 0x1) pdimm->mirrored_dimm = 1; diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c index bfc76b3..e024db9 100644 --- a/drivers/ddr/fsl/fsl_ddr_gen4.c +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -216,7 +216,7 @@ step2: * For example, 2GB on 666MT/s 64-bit bus takes about 402ms * Let's wait for 800ms */ - bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK) >> SDRAM_CFG_DBW_SHIFT); timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / (get_ddr_freq(0) >> 20)) << 2; @@ -233,5 +233,4 @@ step2: if (timeout <= 0) printf("Waiting for D_INIT timeout. Memory may not work.\n"); - } diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c index 6aa16b2..32ba6d8 100644 --- a/drivers/ddr/fsl/interactive.c +++ b/drivers/ddr/fsl/interactive.c @@ -517,7 +517,6 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(rcw_2), CTRL_OPTIONS(ddr_cdr1), CTRL_OPTIONS(ddr_cdr2), - CTRL_OPTIONS(tcke_clock_pulse_width_ps), CTRL_OPTIONS(tfaw_window_four_activates_ps), CTRL_OPTIONS(trwt_override), CTRL_OPTIONS(trwt), @@ -808,7 +807,6 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(rcw_2), CTRL_OPTIONS_HEX(ddr_cdr1), CTRL_OPTIONS_HEX(ddr_cdr2), - CTRL_OPTIONS(tcke_clock_pulse_width_ps), CTRL_OPTIONS(tfaw_window_four_activates_ps), CTRL_OPTIONS(trwt_override), CTRL_OPTIONS(trwt), diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 5e001fc..b43b669 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -135,7 +135,7 @@ __attribute__((weak, alias("__get_spd"))) void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address); void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) + unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl) { unsigned int i; unsigned int i2c_address = 0; @@ -145,14 +145,14 @@ void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, return; } - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + for (i = 0; i < dimm_slots_per_ctrl; i++) { i2c_address = spd_i2c_addr[ctrl_num][i]; get_spd(&(ctrl_dimms_spd[i]), i2c_address); } } #else void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) + unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl) { } #endif /* SPD_EEPROM_ADDRESSx */ @@ -231,9 +231,11 @@ const char * step_to_string(unsigned int step) { static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, unsigned int dbw_cap_adj[]) { - int i, j; + unsigned int i, j; unsigned long long total_mem, current_mem_base, total_ctlr_mem; unsigned long long rank_density, ctlr_density = 0; + unsigned int first_ctrl = pinfo->first_ctrl; + unsigned int last_ctrl = first_ctrl + pinfo->num_ctrls - 1; /* * If a reduced data width is requested, but the SPD @@ -241,7 +243,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, * computed dimm capacities accordingly before * assigning addresses. */ - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { unsigned int found = 0; switch (pinfo->memctl_opts[i].data_bus_width) { @@ -295,12 +297,12 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]); } - current_mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY; + current_mem_base = pinfo->mem_base; total_mem = 0; - if (pinfo->memctl_opts[0].memctl_interleaving) { - rank_density = pinfo->dimm_params[0][0].rank_density >> - dbw_cap_adj[0]; - switch (pinfo->memctl_opts[0].ba_intlv_ctl & + if (pinfo->memctl_opts[first_ctrl].memctl_interleaving) { + rank_density = pinfo->dimm_params[first_ctrl][0].rank_density >> + dbw_cap_adj[first_ctrl]; + switch (pinfo->memctl_opts[first_ctrl].ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: ctlr_density = 4 * rank_density; @@ -316,7 +318,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, } debug("rank density is 0x%llx, ctlr density is 0x%llx\n", rank_density, ctlr_density); - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { if (pinfo->memctl_opts[i].memctl_interleaving) { switch (pinfo->memctl_opts[i].memctl_interleaving_mode) { case FSL_DDR_256B_INTERLEAVING: @@ -372,7 +374,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, * Simple linear assignment if memory * controllers are not interleaved. */ - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { total_ctlr_mem = 0; pinfo->common_timing_params[i].base_address = current_mem_base; @@ -408,18 +410,23 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, { unsigned int i, j; unsigned long long total_mem = 0; - int assert_reset; + int assert_reset = 0; + unsigned int first_ctrl = pinfo->first_ctrl; + unsigned int last_ctrl = first_ctrl + pinfo->num_ctrls - 1; + __maybe_unused int retval; + __maybe_unused bool goodspd = false; + __maybe_unused int dimm_slots_per_ctrl = pinfo->dimm_slots_per_ctrl; fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg; common_timing_params_t *timing_params = pinfo->common_timing_params; - assert_reset = board_need_mem_reset(); + if (pinfo->board_need_mem_reset) + assert_reset = pinfo->board_need_mem_reset(); /* data bus width capacity adjust shift amount */ unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS]; - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) dbw_capacity_adjust[i] = 0; - } debug("starting at step %u (%s)\n", start_step, step_to_string(start_step)); @@ -428,28 +435,28 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, case STEP_GET_SPD: #if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM) /* STEP 1: Gather all DIMM SPD data */ - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { - fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i); + for (i = first_ctrl; i <= last_ctrl; i++) { + fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i, + dimm_slots_per_ctrl); } case STEP_COMPUTE_DIMM_PARMS: /* STEP 2: Compute DIMM parameters from SPD data */ - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { - unsigned int retval; generic_spd_eeprom_t *spd = &(pinfo->spd_installed_dimms[i][j]); dimm_params_t *pdimm = &(pinfo->dimm_params[i][j]); - retval = compute_dimm_parameters(spd, pdimm, i); #ifdef CONFIG_SYS_DDR_RAW_TIMING if (!i && !j && retval) { printf("SPD error on controller %d! " "Trying fallback to raw timing " "calculation\n", i); - fsl_ddr_get_dimm_params(pdimm, i, j); + retval = fsl_ddr_get_dimm_params(pdimm, + i, j); } #else if (retval == 2) { @@ -463,13 +470,26 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, debug("Warning: compute_dimm_parameters" " non-zero return value for memctl=%u " "dimm=%u\n", i, j); + } else { + goodspd = true; } } } + if (!goodspd) { + /* + * No valid SPD found + * Throw an error if this is for main memory, i.e. + * first_ctrl == 0. Otherwise, siliently return 0 + * as the memory size. + */ + if (first_ctrl == 0) + printf("Error: No valid SPD detected.\n"); + return 0; + } #elif defined(CONFIG_SYS_DDR_RAW_TIMING) case STEP_COMPUTE_DIMM_PARMS: - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { dimm_params_t *pdimm = &(pinfo->dimm_params[i][j]); @@ -483,7 +503,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, * STEP 3: Compute a common set of timing parameters * suitable for all of the DIMMs on each memory controller */ - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { debug("Computing lowest common DIMM" " parameters for memctl=%u\n", i); compute_lowest_common_dimm_parameters( @@ -494,7 +514,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, case STEP_GATHER_OPTS: /* STEP 4: Gather configuration requirements from user */ - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { debug("Reloading memory controller " "configuration options for memctl=%u\n", i); /* @@ -516,9 +536,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, if (timing_params[i].all_dimms_registered) assert_reset = 1; } - if (assert_reset) { - debug("Asserting mem reset\n"); - board_assert_mem_reset(); + if (assert_reset && !size_only) { + if (pinfo->board_mem_reset) { + debug("Asserting mem reset\n"); + pinfo->board_mem_reset(); + } else { + debug("Asserting mem reset missing\n"); + } } case STEP_ASSIGN_ADDRESSES: @@ -530,7 +554,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, case STEP_COMPUTE_REGS: /* STEP 6: compute controller register values */ debug("FSL Memory ctrl register computation\n"); - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { if (timing_params[i].ndimms_present == 0) { memset(&ddr_reg[i], 0, sizeof(fsl_ddr_cfg_regs_t)); @@ -558,7 +582,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, */ unsigned int max_end = 0; - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) { fsl_ddr_cfg_regs_t *reg = &ddr_reg[i]; if (reg->cs[j].config & 0x80000000) { @@ -578,53 +602,45 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, } total_mem = 1 + (((unsigned long long)max_end << 24ULL) | - 0xFFFFFFULL) - CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY; + 0xFFFFFFULL) - pinfo->mem_base; } return total_mem; } -/* - * fsl_ddr_sdram() -- this is the main function to be called by - * initdram() in the board file. - * - * It returns amount of memory configured in bytes. - */ -phys_size_t fsl_ddr_sdram(void) +phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) { - unsigned int i; + unsigned int i, first_ctrl, last_ctrl; #ifdef CONFIG_PPC unsigned int law_memctl = LAW_TRGT_IF_DDR_1; #endif unsigned long long total_memory; - fsl_ddr_info_t info; - int deassert_reset; + int deassert_reset = 0; - /* Reset info structure. */ - memset(&info, 0, sizeof(fsl_ddr_info_t)); + first_ctrl = pinfo->first_ctrl; + last_ctrl = first_ctrl + pinfo->num_ctrls - 1; /* Compute it once normally. */ #ifdef CONFIG_FSL_DDR_INTERACTIVE if (tstc() && (getc() == 'd')) { /* we got a key press of 'd' */ - total_memory = fsl_ddr_interactive(&info, 0); + total_memory = fsl_ddr_interactive(pinfo, 0); } else if (fsl_ddr_interactive_env_var_exists()) { - total_memory = fsl_ddr_interactive(&info, 1); + total_memory = fsl_ddr_interactive(pinfo, 1); } else #endif - total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0); + total_memory = fsl_ddr_compute(pinfo, STEP_GET_SPD, 0); /* setup 3-way interleaving before enabling DDRC */ - if (info.memctl_opts[0].memctl_interleaving) { - switch (info.memctl_opts[0].memctl_interleaving_mode) { - case FSL_DDR_3WAY_1KB_INTERLEAVING: - case FSL_DDR_3WAY_4KB_INTERLEAVING: - case FSL_DDR_3WAY_8KB_INTERLEAVING: - fsl_ddr_set_intl3r( - info.memctl_opts[0].memctl_interleaving_mode); - break; - default: - break; - } + switch (pinfo->memctl_opts[first_ctrl].memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r( + pinfo->memctl_opts[first_ctrl]. + memctl_interleaving_mode); + break; + default: + break; } /* @@ -637,14 +653,15 @@ phys_size_t fsl_ddr_sdram(void) * For non-registered DIMMs, initialization can go through but it is * also OK to follow the same flow. */ - deassert_reset = board_need_mem_reset(); - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { - if (info.common_timing_params[i].all_dimms_registered) + if (pinfo->board_need_mem_reset) + deassert_reset = pinfo->board_need_mem_reset(); + for (i = first_ctrl; i <= last_ctrl; i++) { + if (pinfo->common_timing_params[i].all_dimms_registered) deassert_reset = 1; } - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + for (i = first_ctrl; i <= last_ctrl; i++) { debug("Programming controller %u\n", i); - if (info.common_timing_params[i].ndimms_present == 0) { + if (pinfo->common_timing_params[i].ndimms_present == 0) { debug("No dimms present on controller %u; " "skipping programming\n", i); continue; @@ -653,45 +670,58 @@ phys_size_t fsl_ddr_sdram(void) * The following call with step = 1 returns before enabling * the controller. It has to finish with step = 2 later. */ - fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i, + fsl_ddr_set_memctl_regs(&(pinfo->fsl_ddr_config_reg[i]), i, deassert_reset ? 1 : 0); } if (deassert_reset) { /* Use board FPGA or GPIO to deassert reset signal */ - debug("Deasserting mem reset\n"); - board_deassert_mem_reset(); - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if (pinfo->board_mem_de_reset) { + debug("Deasserting mem reset\n"); + pinfo->board_mem_de_reset(); + } else { + debug("Deasserting mem reset missing\n"); + } + for (i = first_ctrl; i <= last_ctrl; i++) { /* Call with step = 2 to continue initialization */ - fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), + fsl_ddr_set_memctl_regs(&(pinfo->fsl_ddr_config_reg[i]), i, 2); } } #ifdef CONFIG_PPC /* program LAWs */ - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { - if (info.memctl_opts[i].memctl_interleaving) { - switch (info.memctl_opts[i].memctl_interleaving_mode) { + for (i = first_ctrl; i <= last_ctrl; i++) { + if (pinfo->memctl_opts[i].memctl_interleaving) { + switch (pinfo->memctl_opts[i]. + memctl_interleaving_mode) { case FSL_DDR_CACHE_LINE_INTERLEAVING: case FSL_DDR_PAGE_INTERLEAVING: case FSL_DDR_BANK_INTERLEAVING: case FSL_DDR_SUPERBANK_INTERLEAVING: + if (i % 2) + break; if (i == 0) { law_memctl = LAW_TRGT_IF_DDR_INTRLV; - fsl_ddr_set_lawbar(&info.common_timing_params[i], + fsl_ddr_set_lawbar( + &pinfo->common_timing_params[i], law_memctl, i); - } else if (i == 2) { + } +#if CONFIG_NUM_DDR_CONTROLLERS > 3 + else if (i == 2) { law_memctl = LAW_TRGT_IF_DDR_INTLV_34; - fsl_ddr_set_lawbar(&info.common_timing_params[i], + fsl_ddr_set_lawbar( + &pinfo->common_timing_params[i], law_memctl, i); } +#endif break; case FSL_DDR_3WAY_1KB_INTERLEAVING: case FSL_DDR_3WAY_4KB_INTERLEAVING: case FSL_DDR_3WAY_8KB_INTERLEAVING: law_memctl = LAW_TRGT_IF_DDR_INTLV_123; if (i == 0) { - fsl_ddr_set_lawbar(&info.common_timing_params[i], + fsl_ddr_set_lawbar( + &pinfo->common_timing_params[i], law_memctl, i); } break; @@ -700,7 +730,8 @@ phys_size_t fsl_ddr_sdram(void) case FSL_DDR_4WAY_8KB_INTERLEAVING: law_memctl = LAW_TRGT_IF_DDR_INTLV_1234; if (i == 0) - fsl_ddr_set_lawbar(&info.common_timing_params[i], + fsl_ddr_set_lawbar( + &pinfo->common_timing_params[i], law_memctl, i); /* place holder for future 4-way interleaving */ break; @@ -724,8 +755,8 @@ phys_size_t fsl_ddr_sdram(void) default: break; } - fsl_ddr_set_lawbar(&info.common_timing_params[i], - law_memctl, i); + fsl_ddr_set_lawbar(&pinfo->common_timing_params[i], + law_memctl, i); } } #endif @@ -734,7 +765,7 @@ phys_size_t fsl_ddr_sdram(void) #if !defined(CONFIG_PHYS_64BIT) /* Check for 4G or more. Bad. */ - if (total_memory >= (1ull << 32)) { + if ((first_ctrl == 0) && (total_memory >= (1ull << 32))) { puts("Detected "); print_size(total_memory, " of memory\n"); printf(" This U-Boot only supports < 4G of DDR\n"); @@ -748,8 +779,56 @@ phys_size_t fsl_ddr_sdram(void) } /* - * fsl_ddr_sdram_size() - This function only returns the size of the total - * memory without setting ddr control registers. + * fsl_ddr_sdram(void) -- this is the main function to be + * called by initdram() in the board file. + * + * It returns amount of memory configured in bytes. + */ +phys_size_t fsl_ddr_sdram(void) +{ + fsl_ddr_info_t info; + + /* Reset info structure. */ + memset(&info, 0, sizeof(fsl_ddr_info_t)); + info.mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY; + info.first_ctrl = 0; + info.num_ctrls = CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS; + info.dimm_slots_per_ctrl = CONFIG_DIMM_SLOTS_PER_CTLR; + info.board_need_mem_reset = board_need_mem_reset; + info.board_mem_reset = board_assert_mem_reset; + info.board_mem_de_reset = board_deassert_mem_reset; + + return __fsl_ddr_sdram(&info); +} + +#ifdef CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS +phys_size_t fsl_other_ddr_sdram(unsigned long long base, + unsigned int first_ctrl, + unsigned int num_ctrls, + unsigned int dimm_slots_per_ctrl, + int (*board_need_reset)(void), + void (*board_reset)(void), + void (*board_de_reset)(void)) +{ + fsl_ddr_info_t info; + + /* Reset info structure. */ + memset(&info, 0, sizeof(fsl_ddr_info_t)); + info.mem_base = base; + info.first_ctrl = first_ctrl; + info.num_ctrls = num_ctrls; + info.dimm_slots_per_ctrl = dimm_slots_per_ctrl; + info.board_need_mem_reset = board_need_reset; + info.board_mem_reset = board_reset; + info.board_mem_de_reset = board_de_reset; + + return __fsl_ddr_sdram(&info); +} +#endif + +/* + * fsl_ddr_sdram_size(first_ctrl, last_intlv) - This function only returns the + * size of the total memory without setting ddr control registers. */ phys_size_t fsl_ddr_sdram_size(void) @@ -758,6 +837,11 @@ fsl_ddr_sdram_size(void) unsigned long long total_memory = 0; memset(&info, 0 , sizeof(fsl_ddr_info_t)); + info.mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY; + info.first_ctrl = 0; + info.num_ctrls = CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS; + info.dimm_slots_per_ctrl = CONFIG_DIMM_SLOTS_PER_CTLR; + info.board_need_mem_reset = NULL; /* Compute it once normally. */ total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 1); diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c index 5986e1a..6d098d1 100644 --- a/drivers/ddr/fsl/options.c +++ b/drivers/ddr/fsl/options.c @@ -777,10 +777,6 @@ unsigned int populate_memctl_options(int all_dimms_registered, */ popts->bstopre = 0x100; - /* Minimum CKE pulse width -- tCKE(MIN) */ - popts->tcke_clock_pulse_width_ps - = mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR); - /* * Window for four activates -- tFAW * @@ -1065,18 +1061,21 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) unsigned int check_intlv, check_n_row_addr, check_n_col_addr; unsigned long long check_rank_density; struct dimm_params_s *dimm; + int first_ctrl = pinfo->first_ctrl; + int last_ctrl = first_ctrl + pinfo->num_ctrls - 1; + /* * Check if all controllers are configured for memory * controller interleaving. Identical dimms are recommended. At least * the size, row and col address should be checked. */ j = 0; - check_n_ranks = pinfo->dimm_params[0][0].n_ranks; - check_rank_density = pinfo->dimm_params[0][0].rank_density; - check_n_row_addr = pinfo->dimm_params[0][0].n_row_addr; - check_n_col_addr = pinfo->dimm_params[0][0].n_col_addr; - check_intlv = pinfo->memctl_opts[0].memctl_interleaving_mode; - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + check_n_ranks = pinfo->dimm_params[first_ctrl][0].n_ranks; + check_rank_density = pinfo->dimm_params[first_ctrl][0].rank_density; + check_n_row_addr = pinfo->dimm_params[first_ctrl][0].n_row_addr; + check_n_col_addr = pinfo->dimm_params[first_ctrl][0].n_col_addr; + check_intlv = pinfo->memctl_opts[first_ctrl].memctl_interleaving_mode; + for (i = first_ctrl; i <= last_ctrl; i++) { dimm = &pinfo->dimm_params[i][0]; if (!pinfo->memctl_opts[i].memctl_interleaving) { continue; @@ -1094,7 +1093,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) } if (intlv_invalid) { - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) + for (i = first_ctrl; i <= last_ctrl; i++) pinfo->memctl_opts[i].memctl_interleaving = 0; printf("Not all DIMMs are identical. " "Memory controller interleaving disabled.\n"); @@ -1123,10 +1122,10 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) } debug("%d of %d controllers are interleaving.\n", j, k); if (j && (j != k)) { - for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) + for (i = first_ctrl; i <= last_ctrl; i++) pinfo->memctl_opts[i].memctl_interleaving = 0; - printf("Not all controllers have compatible " - "interleaving mode. All disabled.\n"); + if ((last_ctrl - first_ctrl) > 1) + puts("Not all controllers have compatible interleaving mode. All disabled.\n"); } } debug("Checking interleaving options completed\n"); diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c index 7a22aa3..58b519b 100644 --- a/drivers/ddr/fsl/util.c +++ b/drivers/ddr/fsl/util.c @@ -149,7 +149,7 @@ u32 fsl_ddr_get_intl3r(void) return val; } -void board_add_ram_info(int use_default) +void print_ddr_info(unsigned int start_ctrl) { struct ccsr_ddr __iomem *ddr = (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); @@ -164,17 +164,25 @@ void board_add_ram_info(int use_default) int cas_lat; #if CONFIG_NUM_DDR_CONTROLLERS >= 2 - if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) || + (start_ctrl == 1)) { ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR; sdram_cfg = ddr_in32(&ddr->sdram_cfg); } #endif #if CONFIG_NUM_DDR_CONTROLLERS >= 3 - if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) || + (start_ctrl == 2)) { ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR; sdram_cfg = ddr_in32(&ddr->sdram_cfg); } #endif + + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + puts(" (DDR not enabled)\n"); + return; + } + puts(" (DDR"); switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) { @@ -241,7 +249,7 @@ void board_add_ram_info(int use_default) #endif #endif #if (CONFIG_NUM_DDR_CONTROLLERS >= 2) - if (cs0_config & 0x20000000) { + if ((cs0_config & 0x20000000) && (start_ctrl == 0)) { puts("\n"); puts(" DDR Controller Interleaving Mode: "); @@ -290,3 +298,13 @@ void board_add_ram_info(int use_default) } } } + +void __weak detail_board_ddr_info(void) +{ + print_ddr_info(0); +} + +void board_add_ram_info(int use_default) +{ + detail_board_ddr_info(); +} diff --git a/drivers/demo/Makefile b/drivers/demo/Makefile index baaa2ba..171ddf3 100644 --- a/drivers/demo/Makefile +++ b/drivers/demo/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_DM_DEMO) += demo-uclass.o demo-pdata.o +obj-y += demo-uclass.o demo-pdata.o obj-$(CONFIG_DM_DEMO_SIMPLE) += demo-simple.o obj-$(CONFIG_DM_DEMO_SHAPE) += demo-shape.o diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/dfu/Kconfig diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/dma/Kconfig diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c index 45e49c7..7ef7f12 100644 --- a/drivers/dma/fsl_dma.c +++ b/drivers/dma/fsl_dma.c @@ -96,7 +96,7 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { uint xfer_size; while (count) { - xfer_size = MIN(FSL_DMA_MAX_SIZE, count); + xfer_size = min(FSL_DMA_MAX_SIZE, count); out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF)); out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF)); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/gpio/Kconfig diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/hwmon/Kconfig diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/i2c/Kconfig diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c index fe66ce2..19fbe59 100644 --- a/drivers/i2c/ihs_i2c.c +++ b/drivers/i2c/ihs_i2c.c @@ -84,7 +84,7 @@ static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus) int shift = (alen-1) * 8; while (alen) { - int transfer = MIN(alen, 2); + int transfer = min(alen, 2); uchar buf[2]; bool is_last = alen <= transfer; @@ -113,7 +113,7 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr, return 1; while (len) { - int transfer = MIN(len, 2); + int transfer = min(len, 2); if (ihs_i2c_transfer(chip, buffer, transfer, read, len <= transfer)) diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/input/Kconfig diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/misc/Kconfig diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/mmc/Kconfig diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 97d0389..26406072 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -610,7 +610,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) #endif cfg->cfg.f_min = 400000; - cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000); + cfg->cfg.f_max = min(gd->arch.sdhc_clk, 52000000); cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig new file mode 100644 index 0000000..415ab4e --- /dev/null +++ b/drivers/mtd/Kconfig @@ -0,0 +1 @@ +source "drivers/mtd/nand/Kconfig" diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig new file mode 100644 index 0000000..75c2c06 --- /dev/null +++ b/drivers/mtd/nand/Kconfig @@ -0,0 +1,42 @@ +menu "NAND Device Support" + +if !SPL_BUILD + +config NAND_DENALI + bool "Support Denali NAND controller" + help + Enable support for the Denali NAND controller. + +config SYS_NAND_DENALI_64BIT + bool "Use 64-bit variant of Denali NAND controller" + depends on NAND_DENALI + help + The Denali NAND controller IP has some variations in terms of + the bus interface. The DMA setup sequence is completely differenct + between 32bit / 64bit AXI bus variants. + + If your Denali NAND controller is the 64-bit variant, say Y. + Otherwise (32 bit), say N. + +config NAND_DENALI_SPARE_AREA_SKIP_BYTES + int "Number of bytes skipped in OOB area" + depends on NAND_DENALI + range 0 63 + help + This option specifies the number of bytes to skip from the beginning + of OOB area before last ECC sector data starts. This is potentially + used to preserve the bad block marker in the OOB area. + +endif + +if SPL_BUILD + +config SPL_NAND_DENALI + bool "Support Denali NAND controller for SPL" + help + This is a small implementation of the Denali NAND controller + for use on SPL. + +endif + +endmenu diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index eef86d1..1f02bfc 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -12,6 +12,7 @@ NORMAL_DRIVERS=y endif obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o +obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o obj-$(CONFIG_SPL_NAND_DOCG4) += docg4_spl.o obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o @@ -42,6 +43,7 @@ obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o +obj-$(CONFIG_NAND_DENALI) += denali.o obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c index ce65d8e..bf8b2ee 100644 --- a/drivers/mtd/nand/am335x_spl_bch.c +++ b/drivers/mtd/nand/am335x_spl_bch.c @@ -64,14 +64,18 @@ static int nand_command(int block, int page, uint32_t offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ hwctrl(&nand_info[0], (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ /* Row address */ - hwctrl(&nand_info[0], (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ - hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff), + if (cmd != NAND_CMD_RNDOUT) { + hwctrl(&nand_info[0], (page_addr & 0xff), + NAND_CTRL_ALE); /* A[19:12] */ + hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff), NAND_CTRL_ALE); /* A[27:20] */ #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE - /* One more address cycle for devices > 128MiB */ - hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f, + /* One more address cycle for devices > 128MiB */ + hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f, NAND_CTRL_ALE); /* A[31:28] */ #endif + } + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); if (cmd == NAND_CMD_READ0) { diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c new file mode 100644 index 0000000..ba3de1a --- /dev/null +++ b/drivers/mtd/nand/denali.c @@ -0,0 +1,1205 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Copyright (C) 2013-2014, Altera Corporation <www.altera.com> + * Copyright (C) 2009-2010, Intel Corporation and its suppliers. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <nand.h> +#include <asm/errno.h> +#include <asm/io.h> + +#include "denali.h" + +#define NAND_DEFAULT_TIMINGS -1 + +static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; + +/* We define a macro here that combines all interrupts this driver uses into + * a single constant value, for convenience. */ +#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \ + INTR_STATUS__ECC_TRANSACTION_DONE | \ + INTR_STATUS__ECC_ERR | \ + INTR_STATUS__PROGRAM_FAIL | \ + INTR_STATUS__LOAD_COMP | \ + INTR_STATUS__PROGRAM_COMP | \ + INTR_STATUS__TIME_OUT | \ + INTR_STATUS__ERASE_FAIL | \ + INTR_STATUS__RST_COMP | \ + INTR_STATUS__ERASE_COMP | \ + INTR_STATUS__ECC_UNCOR_ERR | \ + INTR_STATUS__INT_ACT | \ + INTR_STATUS__LOCKED_BLK) + +/* indicates whether or not the internal value for the flash bank is + * valid or not */ +#define CHIP_SELECT_INVALID -1 + +#define SUPPORT_8BITECC 1 + +/* + * this macro allows us to convert from an MTD structure to our own + * device context (denali) structure. + */ +#define mtd_to_denali(m) (((struct nand_chip *)mtd->priv)->priv) + +/* These constants are defined by the driver to enable common driver + * configuration options. */ +#define SPARE_ACCESS 0x41 +#define MAIN_ACCESS 0x42 +#define MAIN_SPARE_ACCESS 0x43 + +#define DENALI_UNLOCK_START 0x10 +#define DENALI_UNLOCK_END 0x11 +#define DENALI_LOCK 0x21 +#define DENALI_LOCK_TIGHT 0x31 +#define DENALI_BUFFER_LOAD 0x60 +#define DENALI_BUFFER_WRITE 0x62 + +#define DENALI_READ 0 +#define DENALI_WRITE 0x100 + +/* types of device accesses. We can issue commands and get status */ +#define COMMAND_CYCLE 0 +#define ADDR_CYCLE 1 +#define STATUS_CYCLE 2 + +/* this is a helper macro that allows us to + * format the bank into the proper bits for the controller */ +#define BANK(x) ((x) << 24) + +/* Interrupts are cleared by writing a 1 to the appropriate status bit */ +static inline void clear_interrupt(struct denali_nand_info *denali, + uint32_t irq_mask) +{ + uint32_t intr_status_reg; + + intr_status_reg = INTR_STATUS(denali->flash_bank); + + writel(irq_mask, denali->flash_reg + intr_status_reg); +} + +static uint32_t read_interrupt_status(struct denali_nand_info *denali) +{ + uint32_t intr_status_reg; + + intr_status_reg = INTR_STATUS(denali->flash_bank); + + return readl(denali->flash_reg + intr_status_reg); +} + +static void clear_interrupts(struct denali_nand_info *denali) +{ + uint32_t status; + + status = read_interrupt_status(denali); + clear_interrupt(denali, status); + + denali->irq_status = 0; +} + +static void denali_irq_enable(struct denali_nand_info *denali, + uint32_t int_mask) +{ + int i; + + for (i = 0; i < denali->max_banks; ++i) + writel(int_mask, denali->flash_reg + INTR_EN(i)); +} + +static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) +{ + unsigned long timeout = 1000000; + uint32_t intr_status; + + do { + intr_status = read_interrupt_status(denali) & DENALI_IRQ_ALL; + if (intr_status & irq_mask) { + denali->irq_status &= ~irq_mask; + /* our interrupt was detected */ + break; + } + udelay(1); + timeout--; + } while (timeout != 0); + + if (timeout == 0) { + /* timeout */ + printf("Denali timeout with interrupt status %08x\n", + read_interrupt_status(denali)); + intr_status = 0; + } + return intr_status; +} + +/* + * Certain operations for the denali NAND controller use an indexed mode to + * read/write data. The operation is performed by writing the address value + * of the command to the device memory followed by the data. This function + * abstracts this common operation. +*/ +static void index_addr(struct denali_nand_info *denali, + uint32_t address, uint32_t data) +{ + writel(address, denali->flash_mem + INDEX_CTRL_REG); + writel(data, denali->flash_mem + INDEX_DATA_REG); +} + +/* Perform an indexed read of the device */ +static void index_addr_read_data(struct denali_nand_info *denali, + uint32_t address, uint32_t *pdata) +{ + writel(address, denali->flash_mem + INDEX_CTRL_REG); + *pdata = readl(denali->flash_mem + INDEX_DATA_REG); +} + +/* We need to buffer some data for some of the NAND core routines. + * The operations manage buffering that data. */ +static void reset_buf(struct denali_nand_info *denali) +{ + denali->buf.head = 0; + denali->buf.tail = 0; +} + +static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) +{ + denali->buf.buf[denali->buf.tail++] = byte; +} + +/* resets a specific device connected to the core */ +static void reset_bank(struct denali_nand_info *denali) +{ + uint32_t irq_status; + uint32_t irq_mask = INTR_STATUS__RST_COMP | + INTR_STATUS__TIME_OUT; + + clear_interrupts(denali); + + writel(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET); + + irq_status = wait_for_irq(denali, irq_mask); + if (irq_status & INTR_STATUS__TIME_OUT) + debug("reset bank failed.\n"); +} + +/* Reset the flash controller */ +static uint32_t denali_nand_reset(struct denali_nand_info *denali) +{ + uint32_t i; + + for (i = 0; i < denali->max_banks; i++) + writel(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, + denali->flash_reg + INTR_STATUS(i)); + + for (i = 0; i < denali->max_banks; i++) { + writel(1 << i, denali->flash_reg + DEVICE_RESET); + while (!(readl(denali->flash_reg + INTR_STATUS(i)) & + (INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT))) + if (readl(denali->flash_reg + INTR_STATUS(i)) & + INTR_STATUS__TIME_OUT) + debug("NAND Reset operation timed out on bank" + " %d\n", i); + } + + for (i = 0; i < denali->max_banks; i++) + writel(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, + denali->flash_reg + INTR_STATUS(i)); + + return 0; +} + +/* + * this routine calculates the ONFI timing values for a given mode and + * programs the clocking register accordingly. The mode is determined by + * the get_onfi_nand_para routine. + */ +static void nand_onfi_timing_set(struct denali_nand_info *denali, + uint16_t mode) +{ + uint32_t trea[6] = {40, 30, 25, 20, 20, 16}; + uint32_t trp[6] = {50, 25, 17, 15, 12, 10}; + uint32_t treh[6] = {30, 15, 15, 10, 10, 7}; + uint32_t trc[6] = {100, 50, 35, 30, 25, 20}; + uint32_t trhoh[6] = {0, 15, 15, 15, 15, 15}; + uint32_t trloh[6] = {0, 0, 0, 0, 5, 5}; + uint32_t tcea[6] = {100, 45, 30, 25, 25, 25}; + uint32_t tadl[6] = {200, 100, 100, 100, 70, 70}; + uint32_t trhw[6] = {200, 100, 100, 100, 100, 100}; + uint32_t trhz[6] = {200, 100, 100, 100, 100, 100}; + uint32_t twhr[6] = {120, 80, 80, 60, 60, 60}; + uint32_t tcs[6] = {70, 35, 25, 25, 20, 15}; + + uint32_t tclsrising = 1; + uint32_t data_invalid_rhoh, data_invalid_rloh, data_invalid; + uint32_t dv_window = 0; + uint32_t en_lo, en_hi; + uint32_t acc_clks; + uint32_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; + + en_lo = DIV_ROUND_UP(trp[mode], CLK_X); + en_hi = DIV_ROUND_UP(treh[mode], CLK_X); + if ((en_hi * CLK_X) < (treh[mode] + 2)) + en_hi++; + + if ((en_lo + en_hi) * CLK_X < trc[mode]) + en_lo += DIV_ROUND_UP((trc[mode] - (en_lo + en_hi) * CLK_X), + CLK_X); + + if ((en_lo + en_hi) < CLK_MULTI) + en_lo += CLK_MULTI - en_lo - en_hi; + + while (dv_window < 8) { + data_invalid_rhoh = en_lo * CLK_X + trhoh[mode]; + + data_invalid_rloh = (en_lo + en_hi) * CLK_X + trloh[mode]; + + data_invalid = + data_invalid_rhoh < + data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh; + + dv_window = data_invalid - trea[mode]; + + if (dv_window < 8) + en_lo++; + } + + acc_clks = DIV_ROUND_UP(trea[mode], CLK_X); + + while (((acc_clks * CLK_X) - trea[mode]) < 3) + acc_clks++; + + if ((data_invalid - acc_clks * CLK_X) < 2) + debug("%s, Line %d: Warning!\n", __FILE__, __LINE__); + + addr_2_data = DIV_ROUND_UP(tadl[mode], CLK_X); + re_2_we = DIV_ROUND_UP(trhw[mode], CLK_X); + re_2_re = DIV_ROUND_UP(trhz[mode], CLK_X); + we_2_re = DIV_ROUND_UP(twhr[mode], CLK_X); + cs_cnt = DIV_ROUND_UP((tcs[mode] - trp[mode]), CLK_X); + if (!tclsrising) + cs_cnt = DIV_ROUND_UP(tcs[mode], CLK_X); + if (cs_cnt == 0) + cs_cnt = 1; + + if (tcea[mode]) { + while (((cs_cnt * CLK_X) + trea[mode]) < tcea[mode]) + cs_cnt++; + } + + /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */ + if ((readl(denali->flash_reg + MANUFACTURER_ID) == 0) && + (readl(denali->flash_reg + DEVICE_ID) == 0x88)) + acc_clks = 6; + + writel(acc_clks, denali->flash_reg + ACC_CLKS); + writel(re_2_we, denali->flash_reg + RE_2_WE); + writel(re_2_re, denali->flash_reg + RE_2_RE); + writel(we_2_re, denali->flash_reg + WE_2_RE); + writel(addr_2_data, denali->flash_reg + ADDR_2_DATA); + writel(en_lo, denali->flash_reg + RDWR_EN_LO_CNT); + writel(en_hi, denali->flash_reg + RDWR_EN_HI_CNT); + writel(cs_cnt, denali->flash_reg + CS_SETUP_CNT); +} + +/* queries the NAND device to see what ONFI modes it supports. */ +static uint32_t get_onfi_nand_para(struct denali_nand_info *denali) +{ + int i; + /* + * we needn't to do a reset here because driver has already + * reset all the banks before + */ + if (!(readl(denali->flash_reg + ONFI_TIMING_MODE) & + ONFI_TIMING_MODE__VALUE)) + return -EIO; + + for (i = 5; i > 0; i--) { + if (readl(denali->flash_reg + ONFI_TIMING_MODE) & + (0x01 << i)) + break; + } + + nand_onfi_timing_set(denali, i); + + /* By now, all the ONFI devices we know support the page cache */ + /* rw feature. So here we enable the pipeline_rw_ahead feature */ + return 0; +} + +static void get_samsung_nand_para(struct denali_nand_info *denali, + uint8_t device_id) +{ + if (device_id == 0xd3) { /* Samsung K9WAG08U1A */ + /* Set timing register values according to datasheet */ + writel(5, denali->flash_reg + ACC_CLKS); + writel(20, denali->flash_reg + RE_2_WE); + writel(12, denali->flash_reg + WE_2_RE); + writel(14, denali->flash_reg + ADDR_2_DATA); + writel(3, denali->flash_reg + RDWR_EN_LO_CNT); + writel(2, denali->flash_reg + RDWR_EN_HI_CNT); + writel(2, denali->flash_reg + CS_SETUP_CNT); + } +} + +static void get_toshiba_nand_para(struct denali_nand_info *denali) +{ + uint32_t tmp; + + /* Workaround to fix a controller bug which reports a wrong */ + /* spare area size for some kind of Toshiba NAND device */ + if ((readl(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) && + (readl(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) { + writel(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + tmp = readl(denali->flash_reg + DEVICES_CONNECTED) * + readl(denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + writel(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); + } +} + +static void get_hynix_nand_para(struct denali_nand_info *denali, + uint8_t device_id) +{ + uint32_t main_size, spare_size; + + switch (device_id) { + case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */ + case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */ + writel(128, denali->flash_reg + PAGES_PER_BLOCK); + writel(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); + writel(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + main_size = 4096 * + readl(denali->flash_reg + DEVICES_CONNECTED); + spare_size = 224 * + readl(denali->flash_reg + DEVICES_CONNECTED); + writel(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE); + writel(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); + writel(0, denali->flash_reg + DEVICE_WIDTH); + break; + default: + debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x)." + "Will use default parameter values instead.\n", + device_id); + } +} + +/* + * determines how many NAND chips are connected to the controller. Note for + * Intel CE4100 devices we don't support more than one device. + */ +static void find_valid_banks(struct denali_nand_info *denali) +{ + uint32_t id[denali->max_banks]; + int i; + + denali->total_used_banks = 1; + for (i = 0; i < denali->max_banks; i++) { + index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90); + index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0); + index_addr_read_data(denali, + (uint32_t)(MODE_11 | (i << 24) | 2), + &id[i]); + + if (i == 0) { + if (!(id[i] & 0x0ff)) + break; + } else { + if ((id[i] & 0x0ff) == (id[0] & 0x0ff)) + denali->total_used_banks++; + else + break; + } + } +} + +/* + * Use the configuration feature register to determine the maximum number of + * banks that the hardware supports. + */ +static void detect_max_banks(struct denali_nand_info *denali) +{ + uint32_t features = readl(denali->flash_reg + FEATURES); + denali->max_banks = 2 << (features & FEATURES__N_BANKS); +} + +static void detect_partition_feature(struct denali_nand_info *denali) +{ + /* + * For MRST platform, denali->fwblks represent the + * number of blocks firmware is taken, + * FW is in protect partition and MTD driver has no + * permission to access it. So let driver know how many + * blocks it can't touch. + */ + if (readl(denali->flash_reg + FEATURES) & FEATURES__PARTITION) { + if ((readl(denali->flash_reg + PERM_SRC_ID(1)) & + PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) { + denali->fwblks = + ((readl(denali->flash_reg + MIN_MAX_BANK(1)) & + MIN_MAX_BANK__MIN_VALUE) * + denali->blksperchip) + + + (readl(denali->flash_reg + MIN_BLK_ADDR(1)) & + MIN_BLK_ADDR__VALUE); + } else { + denali->fwblks = SPECTRA_START_BLOCK; + } + } else { + denali->fwblks = SPECTRA_START_BLOCK; + } +} + +static uint32_t denali_nand_timing_set(struct denali_nand_info *denali) +{ + uint32_t id_bytes[5], addr; + uint8_t i, maf_id, device_id; + + /* Use read id method to get device ID and other + * params. For some NAND chips, controller can't + * report the correct device ID by reading from + * DEVICE_ID register + * */ + addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); + index_addr(denali, (uint32_t)addr | 0, 0x90); + index_addr(denali, (uint32_t)addr | 1, 0); + for (i = 0; i < 5; i++) + index_addr_read_data(denali, addr | 2, &id_bytes[i]); + maf_id = id_bytes[0]; + device_id = id_bytes[1]; + + if (readl(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) & + ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */ + if (get_onfi_nand_para(denali)) + return -EIO; + } else if (maf_id == 0xEC) { /* Samsung NAND */ + get_samsung_nand_para(denali, device_id); + } else if (maf_id == 0x98) { /* Toshiba NAND */ + get_toshiba_nand_para(denali); + } else if (maf_id == 0xAD) { /* Hynix NAND */ + get_hynix_nand_para(denali, device_id); + } + + find_valid_banks(denali); + + detect_partition_feature(denali); + + /* If the user specified to override the default timings + * with a specific ONFI mode, we apply those changes here. + */ + if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) + nand_onfi_timing_set(denali, onfi_timing_mode); + + return 0; +} + +/* validation function to verify that the controlling software is making + * a valid request + */ +static inline bool is_flash_bank_valid(int flash_bank) +{ + return flash_bank >= 0 && flash_bank < 4; +} + +static void denali_irq_init(struct denali_nand_info *denali) +{ + uint32_t int_mask = 0; + int i; + + /* Disable global interrupts */ + writel(0, denali->flash_reg + GLOBAL_INT_ENABLE); + + int_mask = DENALI_IRQ_ALL; + + /* Clear all status bits */ + for (i = 0; i < denali->max_banks; ++i) + writel(0xFFFF, denali->flash_reg + INTR_STATUS(i)); + + denali_irq_enable(denali, int_mask); +} + +/* This helper function setups the registers for ECC and whether or not + * the spare area will be transferred. */ +static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, + bool transfer_spare) +{ + int ecc_en_flag = 0, transfer_spare_flag = 0; + + /* set ECC, transfer spare bits if needed */ + ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; + transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; + + /* Enable spare area/ECC per user's request. */ + writel(ecc_en_flag, denali->flash_reg + ECC_ENABLE); + /* applicable for MAP01 only */ + writel(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); +} + +/* sends a pipeline command operation to the controller. See the Denali NAND + * controller's user guide for more information (section 4.2.3.6). + */ +static int denali_send_pipeline_cmd(struct denali_nand_info *denali, + bool ecc_en, bool transfer_spare, + int access_type, int op) +{ + uint32_t addr, cmd, irq_status; + static uint32_t page_count = 1; + + setup_ecc_for_xfer(denali, ecc_en, transfer_spare); + + /* clear interrupts */ + clear_interrupts(denali); + + addr = BANK(denali->flash_bank) | denali->page; + + /* setup the acccess type */ + cmd = MODE_10 | addr; + index_addr(denali, cmd, access_type); + + /* setup the pipeline command */ + index_addr(denali, cmd, 0x2000 | op | page_count); + + cmd = MODE_01 | addr; + writel(cmd, denali->flash_mem + INDEX_CTRL_REG); + + if (op == DENALI_READ) { + /* wait for command to be accepted */ + irq_status = wait_for_irq(denali, INTR_STATUS__LOAD_COMP); + + if (irq_status == 0) + return -EIO; + } + + return 0; +} + +/* helper function that simply writes a buffer to the flash */ +static int write_data_to_flash_mem(struct denali_nand_info *denali, + const uint8_t *buf, int len) +{ + uint32_t i = 0, *buf32; + + /* verify that the len is a multiple of 4. see comment in + * read_data_from_flash_mem() */ + BUG_ON((len % 4) != 0); + + /* write the data to the flash memory */ + buf32 = (uint32_t *)buf; + for (i = 0; i < len / 4; i++) + writel(*buf32++, denali->flash_mem + INDEX_DATA_REG); + return i * 4; /* intent is to return the number of bytes read */ +} + +/* helper function that simply reads a buffer from the flash */ +static int read_data_from_flash_mem(struct denali_nand_info *denali, + uint8_t *buf, int len) +{ + uint32_t i, *buf32; + + /* + * we assume that len will be a multiple of 4, if not + * it would be nice to know about it ASAP rather than + * have random failures... + * This assumption is based on the fact that this + * function is designed to be used to read flash pages, + * which are typically multiples of 4... + */ + + BUG_ON((len % 4) != 0); + + /* transfer the data from the flash */ + buf32 = (uint32_t *)buf; + for (i = 0; i < len / 4; i++) + *buf32++ = readl(denali->flash_mem + INDEX_DATA_REG); + + return i * 4; /* intent is to return the number of bytes read */ +} + +static void denali_mode_main_access(struct denali_nand_info *denali) +{ + uint32_t addr, cmd; + + addr = BANK(denali->flash_bank) | denali->page; + cmd = MODE_10 | addr; + index_addr(denali, cmd, MAIN_ACCESS); +} + +static void denali_mode_main_spare_access(struct denali_nand_info *denali) +{ + uint32_t addr, cmd; + + addr = BANK(denali->flash_bank) | denali->page; + cmd = MODE_10 | addr; + index_addr(denali, cmd, MAIN_SPARE_ACCESS); +} + +/* writes OOB data to the device */ +static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t irq_status; + uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP | + INTR_STATUS__PROGRAM_FAIL; + int status = 0; + + denali->page = page; + + if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, + DENALI_WRITE) == 0) { + write_data_to_flash_mem(denali, buf, mtd->oobsize); + + /* wait for operation to complete */ + irq_status = wait_for_irq(denali, irq_mask); + + if (irq_status == 0) { + dev_err(denali->dev, "OOB write failed\n"); + status = -EIO; + } + } else { + printf("unable to send pipeline command\n"); + status = -EIO; + } + return status; +} + +/* reads OOB data from the device */ +static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t irq_mask = INTR_STATUS__LOAD_COMP, + irq_status = 0, addr = 0x0, cmd = 0x0; + + denali->page = page; + + if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, + DENALI_READ) == 0) { + read_data_from_flash_mem(denali, buf, mtd->oobsize); + + /* wait for command to be accepted + * can always use status0 bit as the mask is identical for each + * bank. */ + irq_status = wait_for_irq(denali, irq_mask); + + if (irq_status == 0) + printf("page on OOB timeout %d\n", denali->page); + + /* We set the device back to MAIN_ACCESS here as I observed + * instability with the controller if you do a block erase + * and the last transaction was a SPARE_ACCESS. Block erase + * is reliable (according to the MTD test infrastructure) + * if you are in MAIN_ACCESS. + */ + addr = BANK(denali->flash_bank) | denali->page; + cmd = MODE_10 | addr; + index_addr(denali, cmd, MAIN_ACCESS); + } +} + +/* this function examines buffers to see if they contain data that + * indicate that the buffer is part of an erased region of flash. + */ +static bool is_erased(uint8_t *buf, int len) +{ + int i = 0; + for (i = 0; i < len; i++) + if (buf[i] != 0xFF) + return false; + return true; +} + +/* programs the controller to either enable/disable DMA transfers */ +static void denali_enable_dma(struct denali_nand_info *denali, bool en) +{ + uint32_t reg_val = 0x0; + + if (en) + reg_val = DMA_ENABLE__FLAG; + + writel(reg_val, denali->flash_reg + DMA_ENABLE); + readl(denali->flash_reg + DMA_ENABLE); +} + +/* setups the HW to perform the data DMA */ +static void denali_setup_dma(struct denali_nand_info *denali, int op) +{ + uint32_t mode; + const int page_count = 1; + uint32_t addr = (uint32_t)denali->buf.dma_buf; + + flush_dcache_range(addr, addr + sizeof(denali->buf.dma_buf)); + +/* For Denali controller that is 64 bit bus IP core */ +#ifdef CONFIG_SYS_NAND_DENALI_64BIT + mode = MODE_10 | BANK(denali->flash_bank) | denali->page; + + /* DMA is a three step process */ + + /* 1. setup transfer type, interrupt when complete, + burst len = 64 bytes, the number of pages */ + index_addr(denali, mode, 0x01002000 | (64 << 16) | op | page_count); + + /* 2. set memory low address bits 31:0 */ + index_addr(denali, mode, addr); + + /* 3. set memory high address bits 64:32 */ + index_addr(denali, mode, 0); +#else + mode = MODE_10 | BANK(denali->flash_bank); + + /* DMA is a four step process */ + + /* 1. setup transfer type and # of pages */ + index_addr(denali, mode | denali->page, 0x2000 | op | page_count); + + /* 2. set memory high address bits 23:8 */ + index_addr(denali, mode | ((uint32_t)(addr >> 16) << 8), 0x2200); + + /* 3. set memory low address bits 23:8 */ + index_addr(denali, mode | ((uint32_t)addr << 8), 0x2300); + + /* 4. interrupt when complete, burst len = 64 bytes*/ + index_addr(denali, mode | 0x14000, 0x2400); +#endif +} + +/* Common DMA function */ +static uint32_t denali_dma_configuration(struct denali_nand_info *denali, + uint32_t ops, bool raw_xfer, + uint32_t irq_mask, int oob_required) +{ + uint32_t irq_status = 0; + /* setup_ecc_for_xfer(bool ecc_en, bool transfer_spare) */ + setup_ecc_for_xfer(denali, !raw_xfer, oob_required); + + /* clear any previous interrupt flags */ + clear_interrupts(denali); + + /* enable the DMA */ + denali_enable_dma(denali, true); + + /* setup the DMA */ + denali_setup_dma(denali, ops); + + /* wait for operation to complete */ + irq_status = wait_for_irq(denali, irq_mask); + + /* if ECC fault happen, seems we need delay before turning off DMA. + * If not, the controller will go into non responsive condition */ + if (irq_status & INTR_STATUS__ECC_UNCOR_ERR) + udelay(100); + + /* disable the DMA */ + denali_enable_dma(denali, false); + + return irq_status; +} + +static int write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, bool raw_xfer, int oob_required) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + uint32_t irq_status = 0; + uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP; + + denali->status = 0; + + /* copy buffer into DMA buffer */ + memcpy(denali->buf.dma_buf, buf, mtd->writesize); + + /* need extra memcpy for raw transfer */ + if (raw_xfer) + memcpy(denali->buf.dma_buf + mtd->writesize, + chip->oob_poi, mtd->oobsize); + + /* setting up DMA */ + irq_status = denali_dma_configuration(denali, DENALI_WRITE, raw_xfer, + irq_mask, oob_required); + + /* if timeout happen, error out */ + if (!(irq_status & INTR_STATUS__DMA_CMD_COMP)) { + debug("DMA timeout for denali write_page\n"); + denali->status = NAND_STATUS_FAIL; + return -EIO; + } + + if (irq_status & INTR_STATUS__LOCKED_BLK) { + debug("Failed as write to locked block\n"); + denali->status = NAND_STATUS_FAIL; + return -EIO; + } + return 0; +} + +/* NAND core entry points */ + +/* + * this is the callback that the NAND core calls to write a page. Since + * writing a page with ECC or without is similar, all the work is done + * by write_page above. + */ +static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + /* + * for regular page writes, we let HW handle all the ECC + * data written to the device. + */ + if (oob_required) + /* switch to main + spare access */ + denali_mode_main_spare_access(denali); + else + /* switch to main access only */ + denali_mode_main_access(denali); + + return write_page(mtd, chip, buf, false, oob_required); +} + +/* + * This is the callback that the NAND core calls to write a page without ECC. + * raw access is similar to ECC page writes, so all the work is done in the + * write_page() function above. + */ +static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + /* + * for raw page writes, we want to disable ECC and simply write + * whatever data is in the buffer. + */ + + if (oob_required) + /* switch to main + spare access */ + denali_mode_main_spare_access(denali); + else + /* switch to main access only */ + denali_mode_main_access(denali); + + return write_page(mtd, chip, buf, true, oob_required); +} + +static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + return write_oob_data(mtd, chip->oob_poi, page); +} + +/* raw include ECC value and all the spare area */ +static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + uint32_t irq_status, irq_mask = INTR_STATUS__DMA_CMD_COMP; + + if (denali->page != page) { + debug("Missing NAND_CMD_READ0 command\n"); + return -EIO; + } + + if (oob_required) + /* switch to main + spare access */ + denali_mode_main_spare_access(denali); + else + /* switch to main access only */ + denali_mode_main_access(denali); + + /* setting up the DMA where ecc_enable is false */ + irq_status = denali_dma_configuration(denali, DENALI_READ, true, + irq_mask, oob_required); + + /* if timeout happen, error out */ + if (!(irq_status & INTR_STATUS__DMA_CMD_COMP)) { + debug("DMA timeout for denali_read_page_raw\n"); + return -EIO; + } + + /* splitting the content to destination buffer holder */ + memcpy(chip->oob_poi, (denali->buf.dma_buf + mtd->writesize), + mtd->oobsize); + memcpy(buf, denali->buf.dma_buf, mtd->writesize); + + return 0; +} + +static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t irq_status, irq_mask = INTR_STATUS__DMA_CMD_COMP; + + if (denali->page != page) { + debug("Missing NAND_CMD_READ0 command\n"); + return -EIO; + } + + if (oob_required) + /* switch to main + spare access */ + denali_mode_main_spare_access(denali); + else + /* switch to main access only */ + denali_mode_main_access(denali); + + /* setting up the DMA where ecc_enable is true */ + irq_status = denali_dma_configuration(denali, DENALI_READ, false, + irq_mask, oob_required); + + memcpy(buf, denali->buf.dma_buf, mtd->writesize); + + /* check whether any ECC error */ + if (irq_status & INTR_STATUS__ECC_UNCOR_ERR) { + /* is the ECC cause by erase page, check using read_page_raw */ + debug(" Uncorrected ECC detected\n"); + denali_read_page_raw(mtd, chip, buf, oob_required, + denali->page); + + if (is_erased(buf, mtd->writesize) == true && + is_erased(chip->oob_poi, mtd->oobsize) == true) { + debug(" ECC error cause by erased block\n"); + /* false alarm, return the 0xFF */ + } else { + return -EIO; + } + } + memcpy(buf, denali->buf.dma_buf, mtd->writesize); + return 0; +} + +static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + read_oob_data(mtd, chip->oob_poi, page); + + return 0; +} + +static uint8_t denali_read_byte(struct mtd_info *mtd) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t addr, result; + + addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); + index_addr_read_data(denali, addr | 2, &result); + return (uint8_t)result & 0xFF; +} + +static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t i, addr, result; + + /* delay for tR (data transfer from Flash array to data register) */ + udelay(25); + + /* ensure device completed else additional delay and polling */ + wait_for_irq(denali, INTR_STATUS__INT_ACT); + + addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); + for (i = 0; i < len; i++) { + index_addr_read_data(denali, (uint32_t)addr | 2, &result); + write_byte_to_buf(denali, result); + } + memcpy(buf, denali->buf.buf, len); +} + +static void denali_select_chip(struct mtd_info *mtd, int chip) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + denali->flash_bank = chip; +} + +static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + int status = denali->status; + denali->status = 0; + + return status; +} + +static void denali_erase(struct mtd_info *mtd, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t cmd, irq_status; + + /* clear interrupts */ + clear_interrupts(denali); + + /* setup page read request for access type */ + cmd = MODE_10 | BANK(denali->flash_bank) | page; + index_addr(denali, cmd, 0x1); + + /* wait for erase to complete or failure to occur */ + irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP | + INTR_STATUS__ERASE_FAIL); + + if (irq_status & INTR_STATUS__ERASE_FAIL || + irq_status & INTR_STATUS__LOCKED_BLK) + denali->status = NAND_STATUS_FAIL; + else + denali->status = 0; +} + +static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, + int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t addr; + + switch (cmd) { + case NAND_CMD_PAGEPROG: + break; + case NAND_CMD_STATUS: + addr = MODE_11 | BANK(denali->flash_bank); + index_addr(denali, addr | 0, cmd); + break; + case NAND_CMD_PARAM: + clear_interrupts(denali); + case NAND_CMD_READID: + reset_buf(denali); + /* sometimes ManufactureId read from register is not right + * e.g. some of Micron MT29F32G08QAA MLC NAND chips + * So here we send READID cmd to NAND insteand + * */ + addr = MODE_11 | BANK(denali->flash_bank); + index_addr(denali, addr | 0, cmd); + index_addr(denali, addr | 1, col & 0xFF); + break; + case NAND_CMD_READ0: + case NAND_CMD_SEQIN: + denali->page = page; + break; + case NAND_CMD_RESET: + reset_bank(denali); + break; + case NAND_CMD_READOOB: + /* TODO: Read OOB data */ + break; + case NAND_CMD_ERASE1: + /* + * supporting block erase only, not multiblock erase as + * it will cross plane and software need complex calculation + * to identify the block count for the cross plane + */ + denali_erase(mtd, page); + break; + case NAND_CMD_ERASE2: + /* nothing to do here as it was done during NAND_CMD_ERASE1 */ + break; + case NAND_CMD_UNLOCK1: + addr = MODE_10 | BANK(denali->flash_bank) | page; + index_addr(denali, addr | 0, DENALI_UNLOCK_START); + break; + case NAND_CMD_UNLOCK2: + addr = MODE_10 | BANK(denali->flash_bank) | page; + index_addr(denali, addr | 0, DENALI_UNLOCK_END); + break; + case NAND_CMD_LOCK: + addr = MODE_10 | BANK(denali->flash_bank); + index_addr(denali, addr | 0, DENALI_LOCK); + break; + default: + printf(": unsupported command received 0x%x\n", cmd); + break; + } +} +/* end NAND core entry points */ + +/* Initialization code to bring the device up to a known good state */ +static void denali_hw_init(struct denali_nand_info *denali) +{ + /* + * tell driver how many bit controller will skip before writing + * ECC code in OOB. This is normally used for bad block marker + */ + writel(CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES, + denali->flash_reg + SPARE_AREA_SKIP_BYTES); + detect_max_banks(denali); + denali_nand_reset(denali); + writel(0x0F, denali->flash_reg + RB_PIN_ENABLED); + writel(CHIP_EN_DONT_CARE__FLAG, + denali->flash_reg + CHIP_ENABLE_DONT_CARE); + writel(0xffff, denali->flash_reg + SPARE_AREA_MARKER); + + /* Should set value for these registers when init */ + writel(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); + writel(1, denali->flash_reg + ECC_ENABLE); + denali_nand_timing_set(denali); + denali_irq_init(denali); +} + +static struct nand_ecclayout nand_oob; + +static int denali_nand_init(struct nand_chip *nand) +{ + struct denali_nand_info *denali; + + denali = malloc(sizeof(*denali)); + if (!denali) + return -ENOMEM; + + nand->priv = denali; + + denali->flash_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; + denali->flash_mem = (void __iomem *)CONFIG_SYS_NAND_DATA_BASE; + +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT + /* check whether flash got BBT table (located at end of flash). As we + * use NAND_BBT_NO_OOB, the BBT page will start with + * bbt_pattern. We will have mirror pattern too */ + nand->bbt_options |= NAND_BBT_USE_FLASH; + /* + * We are using main + spare with ECC support. As BBT need ECC support, + * we need to ensure BBT code don't write to OOB for the BBT pattern. + * All BBT info will be stored into data area with ECC support. + */ + nand->bbt_options |= NAND_BBT_NO_OOB; +#endif + + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.size = CONFIG_NAND_DENALI_ECC_SIZE; + nand->ecc.read_oob = denali_read_oob; + nand->ecc.write_oob = denali_write_oob; + nand->ecc.read_page = denali_read_page; + nand->ecc.read_page_raw = denali_read_page_raw; + nand->ecc.write_page = denali_write_page; + nand->ecc.write_page_raw = denali_write_page_raw; + /* + * Tell driver the ecc strength. This register may be already set + * correctly. So we read this value out. + */ + nand->ecc.strength = readl(denali->flash_reg + ECC_CORRECTION); + switch (nand->ecc.size) { + case 512: + nand->ecc.bytes = (nand->ecc.strength * 13 + 15) / 16 * 2; + break; + case 1024: + nand->ecc.bytes = (nand->ecc.strength * 14 + 15) / 16 * 2; + break; + default: + pr_err("Unsupported ECC size\n"); + return -EINVAL; + } + nand_oob.eccbytes = nand->ecc.bytes; + nand->ecc.layout = &nand_oob; + + /* Set address of hardware control function */ + nand->cmdfunc = denali_cmdfunc; + nand->read_byte = denali_read_byte; + nand->read_buf = denali_read_buf; + nand->select_chip = denali_select_chip; + nand->waitfunc = denali_waitfunc; + denali_hw_init(denali); + return 0; +} + +int board_nand_init(struct nand_chip *chip) +{ + return denali_nand_init(chip); +} diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h new file mode 100644 index 0000000..3277da7 --- /dev/null +++ b/drivers/mtd/nand/denali.h @@ -0,0 +1,467 @@ +/* + * Copyright (C) 2013-2014 Altera Corporation <www.altera.com> + * Copyright (C) 2009-2010, Intel Corporation and its suppliers. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/mtd/nand.h> + +#define DEVICE_RESET 0x0 +#define DEVICE_RESET__BANK0 0x0001 +#define DEVICE_RESET__BANK1 0x0002 +#define DEVICE_RESET__BANK2 0x0004 +#define DEVICE_RESET__BANK3 0x0008 + +#define TRANSFER_SPARE_REG 0x10 +#define TRANSFER_SPARE_REG__FLAG 0x0001 + +#define LOAD_WAIT_CNT 0x20 +#define LOAD_WAIT_CNT__VALUE 0xffff + +#define PROGRAM_WAIT_CNT 0x30 +#define PROGRAM_WAIT_CNT__VALUE 0xffff + +#define ERASE_WAIT_CNT 0x40 +#define ERASE_WAIT_CNT__VALUE 0xffff + +#define INT_MON_CYCCNT 0x50 +#define INT_MON_CYCCNT__VALUE 0xffff + +#define RB_PIN_ENABLED 0x60 +#define RB_PIN_ENABLED__BANK0 0x0001 +#define RB_PIN_ENABLED__BANK1 0x0002 +#define RB_PIN_ENABLED__BANK2 0x0004 +#define RB_PIN_ENABLED__BANK3 0x0008 + +#define MULTIPLANE_OPERATION 0x70 +#define MULTIPLANE_OPERATION__FLAG 0x0001 + +#define MULTIPLANE_READ_ENABLE 0x80 +#define MULTIPLANE_READ_ENABLE__FLAG 0x0001 + +#define COPYBACK_DISABLE 0x90 +#define COPYBACK_DISABLE__FLAG 0x0001 + +#define CACHE_WRITE_ENABLE 0xa0 +#define CACHE_WRITE_ENABLE__FLAG 0x0001 + +#define CACHE_READ_ENABLE 0xb0 +#define CACHE_READ_ENABLE__FLAG 0x0001 + +#define PREFETCH_MODE 0xc0 +#define PREFETCH_MODE__PREFETCH_EN 0x0001 +#define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0 + +#define CHIP_ENABLE_DONT_CARE 0xd0 +#define CHIP_EN_DONT_CARE__FLAG 0x01 + +#define ECC_ENABLE 0xe0 +#define ECC_ENABLE__FLAG 0x0001 + +#define GLOBAL_INT_ENABLE 0xf0 +#define GLOBAL_INT_EN_FLAG 0x01 + +#define WE_2_RE 0x100 +#define WE_2_RE__VALUE 0x003f + +#define ADDR_2_DATA 0x110 +#define ADDR_2_DATA__VALUE 0x003f + +#define RE_2_WE 0x120 +#define RE_2_WE__VALUE 0x003f + +#define ACC_CLKS 0x130 +#define ACC_CLKS__VALUE 0x000f + +#define NUMBER_OF_PLANES 0x140 +#define NUMBER_OF_PLANES__VALUE 0x0007 + +#define PAGES_PER_BLOCK 0x150 +#define PAGES_PER_BLOCK__VALUE 0xffff + +#define DEVICE_WIDTH 0x160 +#define DEVICE_WIDTH__VALUE 0x0003 + +#define DEVICE_MAIN_AREA_SIZE 0x170 +#define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff + +#define DEVICE_SPARE_AREA_SIZE 0x180 +#define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff + +#define TWO_ROW_ADDR_CYCLES 0x190 +#define TWO_ROW_ADDR_CYCLES__FLAG 0x0001 + +#define MULTIPLANE_ADDR_RESTRICT 0x1a0 +#define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001 + +#define ECC_CORRECTION 0x1b0 +#define ECC_CORRECTION__VALUE 0x001f + +#define READ_MODE 0x1c0 +#define READ_MODE__VALUE 0x000f + +#define WRITE_MODE 0x1d0 +#define WRITE_MODE__VALUE 0x000f + +#define COPYBACK_MODE 0x1e0 +#define COPYBACK_MODE__VALUE 0x000f + +#define RDWR_EN_LO_CNT 0x1f0 +#define RDWR_EN_LO_CNT__VALUE 0x001f + +#define RDWR_EN_HI_CNT 0x200 +#define RDWR_EN_HI_CNT__VALUE 0x001f + +#define MAX_RD_DELAY 0x210 +#define MAX_RD_DELAY__VALUE 0x000f + +#define CS_SETUP_CNT 0x220 +#define CS_SETUP_CNT__VALUE 0x001f + +#define SPARE_AREA_SKIP_BYTES 0x230 +#define SPARE_AREA_SKIP_BYTES__VALUE 0x003f + +#define SPARE_AREA_MARKER 0x240 +#define SPARE_AREA_MARKER__VALUE 0xffff + +#define DEVICES_CONNECTED 0x250 +#define DEVICES_CONNECTED__VALUE 0x0007 + +#define DIE_MASK 0x260 +#define DIE_MASK__VALUE 0x00ff + +#define FIRST_BLOCK_OF_NEXT_PLANE 0x270 +#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff + +#define WRITE_PROTECT 0x280 +#define WRITE_PROTECT__FLAG 0x0001 + +#define RE_2_RE 0x290 +#define RE_2_RE__VALUE 0x003f + +#define MANUFACTURER_ID 0x300 +#define MANUFACTURER_ID__VALUE 0x00ff + +#define DEVICE_ID 0x310 +#define DEVICE_ID__VALUE 0x00ff + +#define DEVICE_PARAM_0 0x320 +#define DEVICE_PARAM_0__VALUE 0x00ff + +#define DEVICE_PARAM_1 0x330 +#define DEVICE_PARAM_1__VALUE 0x00ff + +#define DEVICE_PARAM_2 0x340 +#define DEVICE_PARAM_2__VALUE 0x00ff + +#define LOGICAL_PAGE_DATA_SIZE 0x350 +#define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff + +#define LOGICAL_PAGE_SPARE_SIZE 0x360 +#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff + +#define REVISION 0x370 +#define REVISION__VALUE 0xffff + +#define ONFI_DEVICE_FEATURES 0x380 +#define ONFI_DEVICE_FEATURES__VALUE 0x003f + +#define ONFI_OPTIONAL_COMMANDS 0x390 +#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f + +#define ONFI_TIMING_MODE 0x3a0 +#define ONFI_TIMING_MODE__VALUE 0x003f + +#define ONFI_PGM_CACHE_TIMING_MODE 0x3b0 +#define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f + +#define ONFI_DEVICE_NO_OF_LUNS 0x3c0 +#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff +#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100 + +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0 +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff + +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0 +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff + +#define FEATURES 0x3f0 +#define FEATURES__N_BANKS 0x0003 +#define FEATURES__ECC_MAX_ERR 0x003c +#define FEATURES__DMA 0x0040 +#define FEATURES__CMD_DMA 0x0080 +#define FEATURES__PARTITION 0x0100 +#define FEATURES__XDMA_SIDEBAND 0x0200 +#define FEATURES__GPREG 0x0400 +#define FEATURES__INDEX_ADDR 0x0800 + +#define TRANSFER_MODE 0x400 +#define TRANSFER_MODE__VALUE 0x0003 + +#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50)) +#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50)) + +/* + * Some versions of the IP have the ECC fixup handled in hardware. In this + * configuration we only get interrupted when the error is uncorrectable. + * Unfortunately this bit replaces INTR_STATUS__ECC_TRANSACTION_DONE from the + * old IP. + */ +#define INTR_STATUS__ECC_UNCOR_ERR 0x0001 +#define INTR_STATUS__ECC_TRANSACTION_DONE 0x0001 +#define INTR_STATUS__ECC_ERR 0x0002 +#define INTR_STATUS__DMA_CMD_COMP 0x0004 +#define INTR_STATUS__TIME_OUT 0x0008 +#define INTR_STATUS__PROGRAM_FAIL 0x0010 +#define INTR_STATUS__ERASE_FAIL 0x0020 +#define INTR_STATUS__LOAD_COMP 0x0040 +#define INTR_STATUS__PROGRAM_COMP 0x0080 +#define INTR_STATUS__ERASE_COMP 0x0100 +#define INTR_STATUS__PIPE_CPYBCK_CMD_COMP 0x0200 +#define INTR_STATUS__LOCKED_BLK 0x0400 +#define INTR_STATUS__UNSUP_CMD 0x0800 +#define INTR_STATUS__INT_ACT 0x1000 +#define INTR_STATUS__RST_COMP 0x2000 +#define INTR_STATUS__PIPE_CMD_ERR 0x4000 +#define INTR_STATUS__PAGE_XFER_INC 0x8000 + +#define INTR_EN__ECC_TRANSACTION_DONE 0x0001 +#define INTR_EN__ECC_ERR 0x0002 +#define INTR_EN__DMA_CMD_COMP 0x0004 +#define INTR_EN__TIME_OUT 0x0008 +#define INTR_EN__PROGRAM_FAIL 0x0010 +#define INTR_EN__ERASE_FAIL 0x0020 +#define INTR_EN__LOAD_COMP 0x0040 +#define INTR_EN__PROGRAM_COMP 0x0080 +#define INTR_EN__ERASE_COMP 0x0100 +#define INTR_EN__PIPE_CPYBCK_CMD_COMP 0x0200 +#define INTR_EN__LOCKED_BLK 0x0400 +#define INTR_EN__UNSUP_CMD 0x0800 +#define INTR_EN__INT_ACT 0x1000 +#define INTR_EN__RST_COMP 0x2000 +#define INTR_EN__PIPE_CMD_ERR 0x4000 +#define INTR_EN__PAGE_XFER_INC 0x8000 + +#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50)) +#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50)) +#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50)) + +#define DATA_INTR 0x550 +#define DATA_INTR__WRITE_SPACE_AV 0x0001 +#define DATA_INTR__READ_DATA_AV 0x0002 + +#define DATA_INTR_EN 0x560 +#define DATA_INTR_EN__WRITE_SPACE_AV 0x0001 +#define DATA_INTR_EN__READ_DATA_AV 0x0002 + +#define GPREG_0 0x570 +#define GPREG_0__VALUE 0xffff + +#define GPREG_1 0x580 +#define GPREG_1__VALUE 0xffff + +#define GPREG_2 0x590 +#define GPREG_2__VALUE 0xffff + +#define GPREG_3 0x5a0 +#define GPREG_3__VALUE 0xffff + +#define ECC_THRESHOLD 0x600 +#define ECC_THRESHOLD__VALUE 0x03ff + +#define ECC_ERROR_BLOCK_ADDRESS 0x610 +#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff + +#define ECC_ERROR_PAGE_ADDRESS 0x620 +#define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff +#define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000 + +#define ECC_ERROR_ADDRESS 0x630 +#define ECC_ERROR_ADDRESS__OFFSET 0x0fff +#define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000 + +#define ERR_CORRECTION_INFO 0x640 +#define ERR_CORRECTION_INFO__BYTEMASK 0x00ff +#define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00 +#define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000 +#define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000 + +#define DMA_ENABLE 0x700 +#define DMA_ENABLE__FLAG 0x0001 + +#define IGNORE_ECC_DONE 0x710 +#define IGNORE_ECC_DONE__FLAG 0x0001 + +#define DMA_INTR 0x720 +#define DMA_INTR__TARGET_ERROR 0x0001 +#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002 +#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004 +#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008 +#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010 +#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020 + +#define DMA_INTR_EN 0x730 +#define DMA_INTR_EN__TARGET_ERROR 0x0001 +#define DMA_INTR_EN__DESC_COMP_CHANNEL0 0x0002 +#define DMA_INTR_EN__DESC_COMP_CHANNEL1 0x0004 +#define DMA_INTR_EN__DESC_COMP_CHANNEL2 0x0008 +#define DMA_INTR_EN__DESC_COMP_CHANNEL3 0x0010 +#define DMA_INTR_EN__MEMCOPY_DESC_COMP 0x0020 + +#define TARGET_ERR_ADDR_LO 0x740 +#define TARGET_ERR_ADDR_LO__VALUE 0xffff + +#define TARGET_ERR_ADDR_HI 0x750 +#define TARGET_ERR_ADDR_HI__VALUE 0xffff + +#define CHNL_ACTIVE 0x760 +#define CHNL_ACTIVE__CHANNEL0 0x0001 +#define CHNL_ACTIVE__CHANNEL1 0x0002 +#define CHNL_ACTIVE__CHANNEL2 0x0004 +#define CHNL_ACTIVE__CHANNEL3 0x0008 + +#define ACTIVE_SRC_ID 0x800 +#define ACTIVE_SRC_ID__VALUE 0x00ff + +#define PTN_INTR 0x810 +#define PTN_INTR__CONFIG_ERROR 0x0001 +#define PTN_INTR__ACCESS_ERROR_BANK0 0x0002 +#define PTN_INTR__ACCESS_ERROR_BANK1 0x0004 +#define PTN_INTR__ACCESS_ERROR_BANK2 0x0008 +#define PTN_INTR__ACCESS_ERROR_BANK3 0x0010 +#define PTN_INTR__REG_ACCESS_ERROR 0x0020 + +#define PTN_INTR_EN 0x820 +#define PTN_INTR_EN__CONFIG_ERROR 0x0001 +#define PTN_INTR_EN__ACCESS_ERROR_BANK0 0x0002 +#define PTN_INTR_EN__ACCESS_ERROR_BANK1 0x0004 +#define PTN_INTR_EN__ACCESS_ERROR_BANK2 0x0008 +#define PTN_INTR_EN__ACCESS_ERROR_BANK3 0x0010 +#define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020 + +#define PERM_SRC_ID(__bank) (0x830 + ((__bank) * 0x40)) +#define PERM_SRC_ID__SRCID 0x00ff +#define PERM_SRC_ID__DIRECT_ACCESS_ACTIVE 0x0800 +#define PERM_SRC_ID__WRITE_ACTIVE 0x2000 +#define PERM_SRC_ID__READ_ACTIVE 0x4000 +#define PERM_SRC_ID__PARTITION_VALID 0x8000 + +#define MIN_BLK_ADDR(__bank) (0x840 + ((__bank) * 0x40)) +#define MIN_BLK_ADDR__VALUE 0xffff + +#define MAX_BLK_ADDR(__bank) (0x850 + ((__bank) * 0x40)) +#define MAX_BLK_ADDR__VALUE 0xffff + +#define MIN_MAX_BANK(__bank) (0x860 + ((__bank) * 0x40)) +#define MIN_MAX_BANK__MIN_VALUE 0x0003 +#define MIN_MAX_BANK__MAX_VALUE 0x000c + +/* lld.h */ +#define GOOD_BLOCK 0 +#define DEFECTIVE_BLOCK 1 +#define READ_ERROR 2 + +#define CLK_X 5 +#define CLK_MULTI 4 + +/* spectraswconfig.h */ +#define CMD_DMA 0 + +#define SPECTRA_PARTITION_ID 0 +/**** Block Table and Reserved Block Parameters *****/ +#define SPECTRA_START_BLOCK 3 +#define NUM_FREE_BLOCKS_GATE 30 + +/* KBV - Updated to LNW scratch register address */ +#define SCRATCH_REG_ADDR CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR +#define SCRATCH_REG_SIZE 64 + +#define GLOB_HWCTL_DEFAULT_BLKS 2048 + +#define CUSTOM_CONF_PARAMS 0 + +#ifndef _LLD_NAND_ +#define _LLD_NAND_ + +#define INDEX_CTRL_REG 0x0 +#define INDEX_DATA_REG 0x10 + +#define MODE_00 0x00000000 +#define MODE_01 0x04000000 +#define MODE_10 0x08000000 +#define MODE_11 0x0C000000 + + +#define DATA_TRANSFER_MODE 0 +#define PROTECTION_PER_BLOCK 1 +#define LOAD_WAIT_COUNT 2 +#define PROGRAM_WAIT_COUNT 3 +#define ERASE_WAIT_COUNT 4 +#define INT_MONITOR_CYCLE_COUNT 5 +#define READ_BUSY_PIN_ENABLED 6 +#define MULTIPLANE_OPERATION_SUPPORT 7 +#define PRE_FETCH_MODE 8 +#define CE_DONT_CARE_SUPPORT 9 +#define COPYBACK_SUPPORT 10 +#define CACHE_WRITE_SUPPORT 11 +#define CACHE_READ_SUPPORT 12 +#define NUM_PAGES_IN_BLOCK 13 +#define ECC_ENABLE_SELECT 14 +#define WRITE_ENABLE_2_READ_ENABLE 15 +#define ADDRESS_2_DATA 16 +#define READ_ENABLE_2_WRITE_ENABLE 17 +#define TWO_ROW_ADDRESS_CYCLES 18 +#define MULTIPLANE_ADDRESS_RESTRICT 19 +#define ACC_CLOCKS 20 +#define READ_WRITE_ENABLE_LOW_COUNT 21 +#define READ_WRITE_ENABLE_HIGH_COUNT 22 + +#define ECC_SECTOR_SIZE 512 + +#define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) + +struct nand_buf { + int head; + int tail; + /* seprating dma_buf as buf can be used for status read purpose */ + uint8_t dma_buf[DENALI_BUF_SIZE] __aligned(64); + uint8_t buf[DENALI_BUF_SIZE]; +}; + +#define INTEL_CE4100 1 +#define INTEL_MRST 2 +#define DT 3 + +struct denali_nand_info { + struct mtd_info mtd; + struct nand_chip *nand; + + int flash_bank; /* currently selected chip */ + int status; + int platform; + struct nand_buf buf; + struct device *dev; + int total_used_banks; + uint32_t block; /* stored for future use */ + uint32_t page; + void __iomem *flash_reg; /* Mapped io reg base address */ + void __iomem *flash_mem; /* Mapped io reg base address */ + + /* elements used by ISR */ + /*struct completion complete;*/ + + uint32_t irq_status; + int irq_debug_array[32]; + int idx; + int irq; + + uint32_t devnum; /* represent how many nands connected */ + uint32_t fwblks; /* represent how many blocks FW used */ + uint32_t totalblks; + uint32_t blksperchip; + uint32_t bbtskipbytes; + uint32_t max_banks; +}; + +#endif /*_LLD_NAND_*/ diff --git a/drivers/mtd/nand/denali_spl.c b/drivers/mtd/nand/denali_spl.c new file mode 100644 index 0000000..65fdde8 --- /dev/null +++ b/drivers/mtd/nand/denali_spl.c @@ -0,0 +1,231 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/unaligned.h> +#include <linux/mtd/nand.h> +#include "denali.h" + +#define SPARE_ACCESS 0x41 +#define MAIN_ACCESS 0x42 +#define PIPELINE_ACCESS 0x2000 + +#define BANK(x) ((x) << 24) + +static void __iomem *denali_flash_mem = + (void __iomem *)CONFIG_SYS_NAND_DATA_BASE; +static void __iomem *denali_flash_reg = + (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; + +static const int flash_bank; +static uint8_t page_buffer[NAND_MAX_PAGESIZE]; +static int page_size, oob_size, pages_per_block; + +static void index_addr(uint32_t address, uint32_t data) +{ + writel(address, denali_flash_mem + INDEX_CTRL_REG); + writel(data, denali_flash_mem + INDEX_DATA_REG); +} + +static int wait_for_irq(uint32_t irq_mask) +{ + unsigned long timeout = 1000000; + uint32_t intr_status; + + do { + intr_status = readl(denali_flash_reg + INTR_STATUS(flash_bank)); + + if (intr_status & INTR_STATUS__ECC_UNCOR_ERR) { + debug("Uncorrected ECC detected\n"); + return -EIO; + } + + if (intr_status & irq_mask) + break; + + udelay(1); + timeout--; + } while (timeout); + + if (!timeout) { + debug("Timeout with interrupt status %08x\n", intr_status); + return -EIO; + } + + return 0; +} + +static void read_data_from_flash_mem(uint8_t *buf, int len) +{ + int i; + uint32_t *buf32; + + /* transfer the data from the flash */ + buf32 = (uint32_t *)buf; + + /* + * Let's take care of unaligned access although it rarely happens. + * Avoid put_unaligned() for the normal use cases since it leads to + * a bit performance regression. + */ + if ((unsigned long)buf32 % 4) { + for (i = 0; i < len / 4; i++) + put_unaligned(readl(denali_flash_mem + INDEX_DATA_REG), + buf32++); + } else { + for (i = 0; i < len / 4; i++) + *buf32++ = readl(denali_flash_mem + INDEX_DATA_REG); + } + + if (len % 4) { + u32 tmp; + + tmp = cpu_to_le32(readl(denali_flash_mem + INDEX_DATA_REG)); + buf = (uint8_t *)buf32; + for (i = 0; i < len % 4; i++) { + *buf++ = tmp; + tmp >>= 8; + } + } +} + +int denali_send_pipeline_cmd(int page, int ecc_en, int access_type) +{ + uint32_t addr, cmd; + static uint32_t page_count = 1; + + writel(ecc_en, denali_flash_reg + ECC_ENABLE); + + /* clear all bits of intr_status. */ + writel(0xffff, denali_flash_reg + INTR_STATUS(flash_bank)); + + addr = BANK(flash_bank) | page; + + /* setup the acccess type */ + cmd = MODE_10 | addr; + index_addr(cmd, access_type); + + /* setup the pipeline command */ + index_addr(cmd, PIPELINE_ACCESS | page_count); + + cmd = MODE_01 | addr; + writel(cmd, denali_flash_mem + INDEX_CTRL_REG); + + return wait_for_irq(INTR_STATUS__LOAD_COMP); +} + +static int nand_read_oob(void *buf, int page) +{ + int ret; + + ret = denali_send_pipeline_cmd(page, 0, SPARE_ACCESS); + if (ret < 0) + return ret; + + read_data_from_flash_mem(buf, oob_size); + + return 0; +} + +static int nand_read_page(void *buf, int page) +{ + int ret; + + ret = denali_send_pipeline_cmd(page, 1, MAIN_ACCESS); + if (ret < 0) + return ret; + + read_data_from_flash_mem(buf, page_size); + + return 0; +} + +static int nand_block_isbad(int block) +{ + int ret; + + ret = nand_read_oob(page_buffer, block * pages_per_block); + if (ret < 0) + return ret; + + return page_buffer[CONFIG_SYS_NAND_BAD_BLOCK_POS] != 0xff; +} + +/* nand_init() - initialize data to make nand usable by SPL */ +void nand_init(void) +{ + /* access to main area */ + writel(0, denali_flash_reg + TRANSFER_SPARE_REG); + + /* + * These registers are expected to be already set by the hardware + * or earlier boot code. So we read these values out. + */ + page_size = readl(denali_flash_reg + DEVICE_MAIN_AREA_SIZE); + oob_size = readl(denali_flash_reg + DEVICE_SPARE_AREA_SIZE); + pages_per_block = readl(denali_flash_reg + PAGES_PER_BLOCK); +} + +int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) +{ + int block, page, column, readlen; + int ret; + int force_bad_block_check = 1; + + page = offs / page_size; + column = offs % page_size; + + block = page / pages_per_block; + page = page % pages_per_block; + + while (size) { + if (force_bad_block_check || page == 0) { + ret = nand_block_isbad(block); + if (ret < 0) + return ret; + + if (ret) { + block++; + continue; + } + } + + force_bad_block_check = 0; + + if (unlikely(column || size < page_size)) { + /* Partial page read */ + ret = nand_read_page(page_buffer, + block * pages_per_block + page); + if (ret < 0) + return ret; + + readlen = min(page_size - column, size); + memcpy(dst, page_buffer, readlen); + + column = 0; + } else { + ret = nand_read_page(dst, + block * pages_per_block + page); + if (ret < 0) + return ret; + + readlen = page_size; + } + + size -= readlen; + dst += readlen; + page++; + if (page == pages_per_block) { + block++; + page = 0; + } + } + + return 0; +} + +void nand_deselect(void) {} diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 7e1e6ec..3372b64 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -37,7 +37,6 @@ #define MAX_BANKS 8 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */ -#define FCM_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for FCM */ #define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) @@ -199,7 +198,8 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; fsl_lbc_t *lbc = ctrl->regs; - long long end_tick; + u32 timeo = (CONFIG_SYS_HZ * 10) / 1000; + u32 time_start; u32 ltesr; /* Setup the FMR[OP] to execute without write protection */ @@ -218,10 +218,10 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) out_be32(&lbc->lsor, priv->bank); /* wait for FCM complete flag or timeout */ - end_tick = usec2ticks(FCM_TIMEOUT_MSECS * 1000) + get_ticks(); + time_start = get_timer(0); ltesr = 0; - while (end_tick > get_ticks()) { + while (get_timer(time_start) < timeo) { ltesr = in_be32(&lbc->ltesr); if (ltesr & LTESR_CC) break; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 2f04c69..81b5070 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -26,8 +26,6 @@ #define MAX_BANKS CONFIG_SYS_FSL_IFC_BANK_COUNT #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */ -#define IFC_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for IFC - NAND Machine */ struct fsl_ifc_ctrl; @@ -292,7 +290,8 @@ static int fsl_ifc_run_command(struct mtd_info *mtd) struct fsl_ifc_mtd *priv = chip->priv; struct fsl_ifc_ctrl *ctrl = priv->ctrl; struct fsl_ifc *ifc = ctrl->regs; - long long end_tick; + u32 timeo = (CONFIG_SYS_HZ * 10) / 1000; + u32 time_start; u32 eccstat[4]; int i; @@ -304,9 +303,9 @@ static int fsl_ifc_run_command(struct mtd_info *mtd) IFC_NAND_SEQ_STRT_FIR_STRT); /* wait for NAND Machine complete flag or timeout */ - end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks(); + time_start = get_timer(0); - while (end_tick > get_ticks()) { + while (get_timer(time_start) < timeo) { ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); if (ctrl->status & IFC_NAND_EVTER_STAT_OPC) @@ -812,15 +811,16 @@ static int fsl_ifc_sram_init(uint32_t ver) struct fsl_ifc *ifc = ifc_ctrl->regs; uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0; uint32_t ncfgr = 0; - long long end_tick; + u32 timeo = (CONFIG_SYS_HZ * 10) / 1000; + u32 time_start; if (ver > FSL_IFC_V1_1_0) { ncfgr = ifc_in32(&ifc->ifc_nand.ncfgr); ifc_out32(&ifc->ifc_nand.ncfgr, ncfgr | IFC_NAND_SRAM_INIT_EN); /* wait for SRAM_INIT bit to be clear or timeout */ - end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks(); - while (end_tick > get_ticks()) { + time_start = get_timer(0); + while (get_timer(time_start) < timeo) { ifc_ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); @@ -863,10 +863,9 @@ static int fsl_ifc_sram_init(uint32_t ver) /* start read seq */ ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT); - /* wait for NAND Machine complete flag or timeout */ - end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks(); + time_start = get_timer(0); - while (end_tick > get_ticks()) { + while (get_timer(time_start) < timeo) { ifc_ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); if (ifc_ctrl->status & IFC_NAND_EVTER_STAT_OPC) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7153e3c..0b6e7ee 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -308,8 +308,7 @@ static void ioread16_rep(void *addr, void *buf, int len) { int i; u16 *p = (u16 *) buf; - len >>= 1; - + for (i = 0; i < len; i++) p[i] = readw(addr); } @@ -318,7 +317,6 @@ static void iowrite16_rep(void *addr, void *buf, int len) { int i; u16 *p = (u16 *) buf; - len >>= 1; for (i = 0; i < len; i++) writew(p[i], addr); diff --git a/drivers/mtd/spi/sandbox.c b/drivers/mtd/spi/sandbox.c index a62ef4c..98e0a34 100644 --- a/drivers/mtd/spi/sandbox.c +++ b/drivers/mtd/spi/sandbox.c @@ -51,46 +51,7 @@ static const char *sandbox_sf_state_name(enum sandbox_sf_state state) /* Assume all SPI flashes have 3 byte addresses since they do atm */ #define SF_ADDR_LEN 3 -struct sandbox_spi_flash_erase_commands { - u8 cmd; - u32 size; -}; -#define IDCODE_LEN 5 -#define MAX_ERASE_CMDS 3 -struct sandbox_spi_flash_data { - const char *name; - u8 idcode[IDCODE_LEN]; - u32 size; - const struct sandbox_spi_flash_erase_commands - erase_cmds[MAX_ERASE_CMDS]; -}; - -/* Structure describing all the flashes we know how to emulate */ -static const struct sandbox_spi_flash_data sandbox_sf_flashes[] = { - { - "M25P16", { 0x20, 0x20, 0x15 }, (2 << 20), - { /* erase commands */ - { 0xd8, (64 << 10), }, /* sector */ - { 0xc7, (2 << 20), }, /* bulk */ - }, - }, - { - "W25Q32", { 0xef, 0x40, 0x16 }, (4 << 20), - { /* erase commands */ - { 0x20, (4 << 10), }, /* 4KB */ - { 0xd8, (64 << 10), }, /* sector */ - { 0xc7, (4 << 20), }, /* bulk */ - }, - }, - { - "W25Q128", { 0xef, 0x40, 0x18 }, (16 << 20), - { /* erase commands */ - { 0x20, (4 << 10), }, /* 4KB */ - { 0xd8, (64 << 10), }, /* sector */ - { 0xc7, (16 << 20), }, /* bulk */ - }, - }, -}; +#define IDCODE_LEN 3 /* Used to quickly bulk erase backing store */ static u8 sandbox_sf_0xff[0x1000]; @@ -109,7 +70,8 @@ struct sandbox_spi_flash { */ enum sandbox_sf_state state; uint cmd; - const void *cmd_data; + /* Erase size of current erase command */ + uint erase_size; /* Current position in the flash; used when reading/writing/etc... */ uint off; /* How many address bytes we've consumed */ @@ -117,7 +79,7 @@ struct sandbox_spi_flash { /* The current flash status (see STAT_XXX defines above) */ u16 status; /* Data describing the flash we're emulating */ - const struct sandbox_spi_flash_data *data; + const struct spi_flash_params *data; /* The file on disk to serv up data from */ int fd; }; @@ -127,8 +89,8 @@ static int sandbox_sf_setup(void **priv, const char *spec) /* spec = idcode:file */ struct sandbox_spi_flash *sbsf; const char *file; - size_t i, len, idname_len; - const struct sandbox_spi_flash_data *data; + size_t len, idname_len; + const struct spi_flash_params *data; file = strchr(spec, ':'); if (!file) { @@ -138,15 +100,14 @@ static int sandbox_sf_setup(void **priv, const char *spec) idname_len = file - spec; ++file; - for (i = 0; i < ARRAY_SIZE(sandbox_sf_flashes); ++i) { - data = &sandbox_sf_flashes[i]; + for (data = spi_flash_params_table; data->name; data++) { len = strlen(data->name); if (idname_len != len) continue; if (!memcmp(spec, data->name, len)) break; } - if (i == ARRAY_SIZE(sandbox_sf_flashes)) { + if (!data->name) { printf("sandbox_sf: unknown flash '%*s'\n", (int)idname_len, spec); goto error; @@ -223,7 +184,6 @@ static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx, sbsf->pad_addr_bytes = 1; case CMD_READ_ARRAY_SLOW: case CMD_PAGE_PROGRAM: - state_addr: sbsf->state = SF_ADDR; break; case CMD_WRITE_DISABLE: @@ -241,24 +201,25 @@ static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx, sbsf->status |= STAT_WEL; break; default: { - size_t i; - - /* handle erase commands first */ - for (i = 0; i < MAX_ERASE_CMDS; ++i) { - const struct sandbox_spi_flash_erase_commands * - erase_cmd = &sbsf->data->erase_cmds[i]; - - if (erase_cmd->cmd == 0x00) - continue; - if (sbsf->cmd != erase_cmd->cmd) - continue; - - sbsf->cmd_data = erase_cmd; - goto state_addr; + int flags = sbsf->data->flags; + + /* we only support erase here */ + if (sbsf->cmd == CMD_ERASE_CHIP) { + sbsf->erase_size = sbsf->data->sector_size * + sbsf->data->nr_sectors; + } else if (sbsf->cmd == CMD_ERASE_4K && (flags & SECT_4K)) { + sbsf->erase_size = 4 << 10; + } else if (sbsf->cmd == CMD_ERASE_32K && (flags & SECT_32K)) { + sbsf->erase_size = 32 << 10; + } else if (sbsf->cmd == CMD_ERASE_64K && + !(flags & (SECT_4K | SECT_32K))) { + sbsf->erase_size = 64 << 10; + } else { + debug(" cmd unknown: %#x\n", sbsf->cmd); + return 1; } - - debug(" cmd unknown: %#x\n", sbsf->cmd); - return 1; + sbsf->state = SF_ADDR; + break; } } @@ -309,11 +270,14 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, u8 id; debug(" id: off:%u tx:", sbsf->off); - if (sbsf->off < IDCODE_LEN) - id = sbsf->data->idcode[sbsf->off]; - else + if (sbsf->off < IDCODE_LEN) { + /* Extract correct byte from ID 0x00aabbcc */ + id = sbsf->data->jedec >> + (8 * (IDCODE_LEN - 1 - sbsf->off)); + } else { id = 0; - debug("%02x\n", id); + } + debug("%d %02x\n", sbsf->off, id); tx[pos++] = id; ++sbsf->off; break; @@ -406,24 +370,22 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, break; case SF_ERASE: case_sf_erase: { - const struct sandbox_spi_flash_erase_commands * - erase_cmd = sbsf->cmd_data; - if (!(sbsf->status & STAT_WEL)) { puts("sandbox_sf: write enable not set before erase\n"); goto done; } /* verify address is aligned */ - if (sbsf->off & (erase_cmd->size - 1)) { + if (sbsf->off & (sbsf->erase_size - 1)) { debug(" sector erase: cmd:%#x needs align:%#x, but we got %#x\n", - erase_cmd->cmd, erase_cmd->size, + sbsf->cmd, sbsf->erase_size, sbsf->off); sbsf->status &= ~STAT_WEL; goto done; } - debug(" sector erase addr: %u\n", sbsf->off); + debug(" sector erase addr: %u, size: %u\n", sbsf->off, + sbsf->erase_size); cnt = bytes - pos; sandbox_spi_tristate(&tx[pos], cnt); @@ -433,7 +395,7 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, * TODO(vapier@gentoo.org): latch WIP in status, and * delay before clearing it ? */ - ret = sandbox_erase_part(sbsf, erase_cmd->size); + ret = sandbox_erase_part(sbsf, sbsf->erase_size); sbsf->status &= ~STAT_WEL; if (ret) { debug("sandbox_sf: Erase failed\n"); diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index ac886fd..453edf0 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -68,9 +68,12 @@ const struct spi_flash_params spi_flash_params_table[] = { {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0, 0}, {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0, 0}, {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0, 0}, + {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, 0, 0}, + {"M25PX16", 0x207115, 0x1000, 64 * 1024, 32, RD_EXTN, 0}, {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0}, {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0}, {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0}, + {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, 0, SECT_4K}, {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, @@ -116,6 +119,7 @@ const struct spi_flash_params spi_flash_params_table[] = { {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, #endif + {}, /* Empty entry to terminate the list */ /* * Note: * Below paired flash devices has similar spi_flash params. diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c index 1954b7e..59cca0f 100644 --- a/drivers/mtd/spi/spi_spl_load.c +++ b/drivers/mtd/spi/spi_spl_load.c @@ -56,8 +56,10 @@ void spl_spi_load_image(void) * Load U-Boot image from SPI flash into RAM */ - flash = spi_flash_probe(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS, - CONFIG_SF_DEFAULT_SPEED, SPI_MODE_3); + flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, + CONFIG_SF_DEFAULT_CS, + CONFIG_SF_DEFAULT_SPEED, + CONFIG_SF_DEFAULT_MODE); if (!flash) { puts("SPI probe failed.\n"); hang(); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/net/Kconfig diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 0eba57c..6e8765c 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -5362,7 +5362,9 @@ e1000_initialize(bd_t * bis) hw->autoneg_failed = 0; hw->autoneg = 1; hw->get_link_status = true; +#ifndef CONFIG_E1000_NO_NVM hw->eeprom_semaphore_present = true; +#endif hw->hw_addr = pci_map_bar(devno, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); hw->mac_type = e1000_undefined; diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c index bcc871d..4cce46d 100644 --- a/drivers/net/fm/t1040.c +++ b/drivers/net/fm/t1040.c @@ -49,8 +49,6 @@ phy_interface_t fman_port_enet_if(enum fm_port port) else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII) return PHY_INTERFACE_MODE_MII; - else - return PHY_INTERFACE_MODE_NONE; } switch (port) { diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/pci/Kconfig diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/pcmcia/Kconfig diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/power/Kconfig diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/rtc/Kconfig diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/serial/Kconfig diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 853a8c6..b4f299b 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o obj-$(CONFIG_MXS_AUART) += mxs_auart.o obj-$(CONFIG_ARC_SERIAL) += serial_arc.o obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o +obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index d04104e..1ac943f 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -25,6 +25,7 @@ struct udevice *cur_dev __attribute__ ((section(".data"))); static void serial_find_console_or_panic(void) { +#ifdef CONFIG_OF_CONTROL int node; /* Check for a chosen console */ @@ -44,7 +45,7 @@ static void serial_find_console_or_panic(void) return; cur_dev = NULL; } - +#endif /* * Failing that, get the device with sequence number 0, or in extremis * just the first serial device we can find. But we insist on having diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index bbe60af..82fbbd9 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -157,6 +157,7 @@ serial_initfunc(sh_serial_initialize); serial_initfunc(arm_dcc_initialize); serial_initfunc(mxs_auart_initialize); serial_initfunc(arc_serial_initialize); +serial_initfunc(uniphier_serial_initialize); /** * serial_register() - Register serial driver with serial driver core @@ -250,6 +251,7 @@ void serial_initialize(void) arm_dcc_initialize(); mxs_auart_initialize(); arc_serial_initialize(); + uniphier_serial_initialize(); serial_assign(default_serial_console()->name); } diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c new file mode 100644 index 0000000..f8c9d92 --- /dev/null +++ b/drivers/serial/serial_uniphier.c @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * Based on serial_ns16550.c + * (C) Copyright 2000 + * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <serial.h> + +#define UART_REG(x) \ + u8 x; \ + u8 postpad_##x[3]; + +/* + * Note: Register map is slightly different from that of 16550. + */ +struct uniphier_serial { + UART_REG(rbr); /* 0x00 */ + UART_REG(ier); /* 0x04 */ + UART_REG(iir); /* 0x08 */ + UART_REG(fcr); /* 0x0c */ + u8 mcr; /* 0x10 */ + u8 lcr; + u16 __postpad; + UART_REG(lsr); /* 0x14 */ + UART_REG(msr); /* 0x18 */ + u32 __none1; + u32 __none2; + u16 dlr; + u16 __postpad2; +}; + +#define thr rbr + +/* + * These are the definitions for the Line Control Register + */ +#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_DR 0x01 /* Data ready */ +#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ + +DECLARE_GLOBAL_DATA_PTR; + +static void uniphier_serial_init(struct uniphier_serial *port) +{ + const unsigned int mode_x_div = 16; + unsigned int divisor; + + writeb(UART_LCR_WLS_8, &port->lcr); + + divisor = DIV_ROUND_CLOSEST(CONFIG_SYS_UNIPHIER_UART_CLK, + mode_x_div * gd->baudrate); + + writew(divisor, &port->dlr); +} + +static void uniphier_serial_setbrg(struct uniphier_serial *port) +{ + uniphier_serial_init(port); +} + +static int uniphier_serial_tstc(struct uniphier_serial *port) +{ + return (readb(&port->lsr) & UART_LSR_DR) != 0; +} + +static int uniphier_serial_getc(struct uniphier_serial *port) +{ + while (!uniphier_serial_tstc(port)) + ; + + return readb(&port->rbr); +} + +static void uniphier_serial_putc(struct uniphier_serial *port, const char c) +{ + if (c == '\n') + uniphier_serial_putc(port, '\r'); + + while (!(readb(&port->lsr) & UART_LSR_THRE)) + ; + + writeb(c, &port->thr); +} + +static struct uniphier_serial *serial_ports[4] = { +#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE0 + (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE0, +#else + NULL, +#endif +#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE1 + (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE1, +#else + NULL, +#endif +#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE2 + (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE2, +#else + NULL, +#endif +#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE3 + (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE3, +#else + NULL, +#endif +}; + +/* Multi serial device functions */ +#define DECLARE_ESERIAL_FUNCTIONS(port) \ + static int eserial##port##_init(void) \ + { \ + uniphier_serial_init(serial_ports[port]); \ + return 0 ; \ + } \ + static void eserial##port##_setbrg(void) \ + { \ + uniphier_serial_setbrg(serial_ports[port]); \ + } \ + static int eserial##port##_getc(void) \ + { \ + return uniphier_serial_getc(serial_ports[port]); \ + } \ + static int eserial##port##_tstc(void) \ + { \ + return uniphier_serial_tstc(serial_ports[port]); \ + } \ + static void eserial##port##_putc(const char c) \ + { \ + uniphier_serial_putc(serial_ports[port], c); \ + } + +/* Serial device descriptor */ +#define INIT_ESERIAL_STRUCTURE(port, __name) { \ + .name = __name, \ + .start = eserial##port##_init, \ + .stop = NULL, \ + .setbrg = eserial##port##_setbrg, \ + .getc = eserial##port##_getc, \ + .tstc = eserial##port##_tstc, \ + .putc = eserial##port##_putc, \ + .puts = default_serial_puts, \ +} + +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) +DECLARE_ESERIAL_FUNCTIONS(0); +struct serial_device uniphier_serial0_device = + INIT_ESERIAL_STRUCTURE(0, "ttyS0"); +#endif +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) +DECLARE_ESERIAL_FUNCTIONS(1); +struct serial_device uniphier_serial1_device = + INIT_ESERIAL_STRUCTURE(1, "ttyS1"); +#endif +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) +DECLARE_ESERIAL_FUNCTIONS(2); +struct serial_device uniphier_serial2_device = + INIT_ESERIAL_STRUCTURE(2, "ttyS2"); +#endif +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) +DECLARE_ESERIAL_FUNCTIONS(3); +struct serial_device uniphier_serial3_device = + INIT_ESERIAL_STRUCTURE(3, "ttyS3"); +#endif + +__weak struct serial_device *default_serial_console(void) +{ +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) + return &uniphier_serial0_device; +#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) + return &uniphier_serial1_device; +#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) + return &uniphier_serial2_device; +#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) + return &uniphier_serial3_device; +#else +#error "No uniphier serial ports configured." +#endif +} + +void uniphier_serial_initialize(void) +{ +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) + serial_register(&uniphier_serial0_device); +#endif +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) + serial_register(&uniphier_serial1_device); +#endif +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) + serial_register(&uniphier_serial2_device); +#endif +#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) + serial_register(&uniphier_serial3_device); +#endif +} diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index b030526..7fb0b92 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -475,7 +475,7 @@ static void __usbtty_puts (const char *str, int len) if (space) { write_buffer (&usbtty_output); - n = MIN (space, MIN (len, maxlen)); + n = min(space, min(len, maxlen)); buf_push (&usbtty_output, str, n); str += n; @@ -882,7 +882,7 @@ static int write_buffer (circbuf_t * buf) space_avail = current_urb->buffer_length - current_urb->actual_length; - popnum = MIN (space_avail, buf->size); + popnum = min(space_avail, buf->size); if (popnum == 0) break; diff --git a/drivers/sound/Kconfig b/drivers/sound/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/sound/Kconfig diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/spi/Kconfig diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index 942a208..3d58bcc 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -18,7 +18,7 @@ static struct kwspi_registers *spireg = (struct kwspi_registers *)KW_SPI_BASE; -u32 cs_spi_mpp_back[2]; +static u32 cs_spi_mpp_back[2]; struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) @@ -37,7 +37,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!slave) return NULL; - writel(~KWSPI_CSN_ACT | KWSPI_SMEMRDY, &spireg->ctrl); + writel(KWSPI_SMEMRDY, &spireg->ctrl); /* calculate spi clock prescaller using max_hz */ data = ((CONFIG_SYS_TCLK / 2) / max_hz) + 0x10; @@ -46,7 +46,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, /* program spi clock prescaller using max_hz */ writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg); - debug("data = 0x%08x \n", data); + debug("data = 0x%08x\n", data); writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause); writel(KWSPI_IRQMASK, &spireg->irq_mask); @@ -100,7 +100,6 @@ int spi_claim_bus(struct spi_slave *slave) /* set new spi mpp and save current mpp config */ kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup); - #endif return board_spi_claim_bus(slave); @@ -127,7 +126,7 @@ void spi_release_bus(struct spi_slave *slave) */ int spi_cs_is_valid(unsigned int bus, unsigned int cs) { - return (bus == 0 && (cs == 0 || cs == 1)); + return bus == 0 && (cs == 0 || cs == 1); } #endif @@ -137,12 +136,12 @@ void spi_init(void) void spi_cs_activate(struct spi_slave *slave) { - writel(readl(&spireg->ctrl) | KWSPI_IRQUNMASK, &spireg->ctrl); + setbits_le32(&spireg->ctrl, KWSPI_CSN_ACT); } void spi_cs_deactivate(struct spi_slave *slave) { - writel(readl(&spireg->ctrl) & KWSPI_IRQMASK, &spireg->ctrl); + clrbits_le32(&spireg->ctrl, KWSPI_CSN_ACT); } int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, @@ -161,8 +160,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, * handle data in 8-bit chunks * TBD: 2byte xfer mode to be enabled */ - writel(((readl(&spireg->cfg) & ~KWSPI_XFERLEN_MASK) | - KWSPI_XFERLEN_1BYTE), &spireg->cfg); + clrsetbits_le32(&spireg->cfg, KWSPI_XFERLEN_MASK, KWSPI_XFERLEN_1BYTE); while (bitlen > 4) { debug("loopstart bitlen %d\n", bitlen); @@ -170,9 +168,9 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, /* Shift data so it's msb-justified */ if (dout) - tmpdout = *(u32 *) dout & 0x0ff; + tmpdout = *(u32 *)dout & 0xff; - writel(~KWSPI_SMEMRDIRQ, &spireg->irq_cause); + clrbits_le32(&spireg->irq_cause, KWSPI_SMEMRDIRQ); writel(tmpdout, &spireg->dout); /* Write the data out */ debug("*** spi_xfer: ... %08x written, bitlen %d\n", tmpdout, bitlen); @@ -186,12 +184,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, if (readl(&spireg->irq_cause) & KWSPI_SMEMRDIRQ) { isread = 1; tmpdin = readl(&spireg->din); - debug - ("spi_xfer: din %p..%08x read\n", - din, tmpdin); + debug("spi_xfer: din %p..%08x read\n", + din, tmpdin); if (din) { - *((u8 *) din) = (u8) tmpdin; + *((u8 *)din) = (u8)tmpdin; din += 1; } if (dout) diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 2d5f385..026f680 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -25,6 +25,11 @@ static unsigned long spi_bases[] = { MXC_SPI_BASE_ADDRESSES }; +__weak int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return -1; +} + #define OUT MXC_GPIO_DIRECTION_OUT #define reg_read readl @@ -371,31 +376,30 @@ void spi_init(void) { } -static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs) +/* + * Some SPI devices require active chip-select over multiple + * transactions, we achieve this using a GPIO. Still, the SPI + * controller has to be configured to use one of its own chipselects. + * To use this feature you have to implement board_spi_cs_gpio() to assign + * a gpio value for each cs (-1 if cs doesn't need to use gpio). + * You must use some unused on this SPI controller cs between 0 and 3. + */ +static int setup_cs_gpio(struct mxc_spi_slave *mxcs, + unsigned int bus, unsigned int cs) { int ret; - /* - * Some SPI devices require active chip-select over multiple - * transactions, we achieve this using a GPIO. Still, the SPI - * controller has to be configured to use one of its own chipselects. - * To use this feature you have to call spi_setup_slave() with - * cs = internal_cs | (gpio << 8), and you have to use some unused - * on this SPI controller cs between 0 and 3. - */ - if (cs > 3) { - mxcs->gpio = cs >> 8; - cs &= 3; - ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol)); - if (ret) { - printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio); - return -EINVAL; - } - } else { - mxcs->gpio = -1; + mxcs->gpio = board_spi_cs_gpio(bus, cs); + if (mxcs->gpio == -1) + return 0; + + ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol)); + if (ret) { + printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio); + return -EINVAL; } - return cs; + return 0; } struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, @@ -415,14 +419,12 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0; - ret = decode_cs(mxcs, cs); + ret = setup_cs_gpio(mxcs, bus, cs); if (ret < 0) { free(mxcs); return NULL; } - cs = ret; - mxcs->base = spi_bases[bus]; ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); diff --git a/drivers/tpm/Kconfig b/drivers/tpm/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/tpm/Kconfig diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/usb/Kconfig diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c index b7c1038..3559400 100644 --- a/drivers/usb/gadget/designware_udc.c +++ b/drivers/usb/gadget/designware_udc.c @@ -269,7 +269,7 @@ static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d", urb->buffer, urb->buffer_length, urb->actual_length); - last = MIN(urb->actual_length - endpoint->sent, + last = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize); if (last) { @@ -285,7 +285,7 @@ static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance align = ((ulong)cp % sizeof(int)); if (align) - last = MIN(last, sizeof(int) - align); + last = min(last, sizeof(int) - align); UDCDBGA("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); diff --git a/drivers/usb/gadget/ep0.c b/drivers/usb/gadget/ep0.c index b321488..4ba2f3d 100644 --- a/drivers/usb/gadget/ep0.c +++ b/drivers/usb/gadget/ep0.c @@ -315,7 +315,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device, /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */ if (max - urb->actual_length > 0) { int length = - MIN (report_descriptor->wLength, + min(report_descriptor->wLength, max - urb->actual_length); memcpy (urb->buffer + urb->actual_length, &report_descriptor->bData[0], length); diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..38c0965 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -10,6 +10,7 @@ * * SPDX-License-Identifier: GPL-2.0+ */ +#include <config.h> #include <common.h> #include <errno.h> #include <malloc.h> @@ -19,6 +20,9 @@ #include <linux/compiler.h> #include <version.h> #include <g_dnl.h> +#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV +#include <fb_mmc.h> +#endif #define FASTBOOT_VERSION "0.4" @@ -38,7 +42,7 @@ struct f_fastboot { struct usb_function usb_function; - /* IN/OUT EP's and correspoinding requests */ + /* IN/OUT EP's and corresponding requests */ struct usb_ep *in_ep, *out_ep; struct usb_request *in_req, *out_req; }; @@ -290,7 +294,7 @@ static int fastboot_add(struct usb_configuration *c) } DECLARE_GADGET_BIND_CALLBACK(usb_dnl_fastboot, fastboot_add); -int fastboot_tx_write(const char *buffer, unsigned int buffer_size) +static int fastboot_tx_write(const char *buffer, unsigned int buffer_size) { struct usb_request *in_req = fastboot_func->in_req; int ret; @@ -338,6 +342,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); if (!cmd) { + error("missing variable\n"); fastboot_tx_write_str("FAILmissing var"); return; } @@ -358,6 +363,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) else strcpy(response, "FAILValue not set"); } else { + error("unknown variable: %s\n", cmd); strcpy(response, "FAILVariable not implemented"); } fastboot_tx_write_str(response); @@ -469,6 +475,28 @@ static void cb_boot(struct usb_ep *ep, struct usb_request *req) fastboot_tx_write_str("OKAY"); } +#ifdef CONFIG_FASTBOOT_FLASH +static void cb_flash(struct usb_ep *ep, struct usb_request *req) +{ + char *cmd = req->buf; + char response[RESPONSE_LEN]; + + strsep(&cmd, ":"); + if (!cmd) { + error("missing partition name\n"); + fastboot_tx_write_str("FAILmissing partition name"); + return; + } + + strcpy(response, "FAILno flash device defined"); +#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV + fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, + download_bytes, response); +#endif + fastboot_tx_write_str(response); +} +#endif + struct cmd_dispatch_info { char *cmd; void (*cb)(struct usb_ep *ep, struct usb_request *req); @@ -488,6 +516,12 @@ static const struct cmd_dispatch_info cmd_dispatch_info[] = { .cmd = "boot", .cb = cb_boot, }, +#ifdef CONFIG_FASTBOOT_FLASH + { + .cmd = "flash", + .cb = cb_flash, + }, +#endif }; static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) @@ -503,10 +537,12 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) } } - if (!func_cb) + if (!func_cb) { + error("unknown command: %s\n", cmdbuf); fastboot_tx_write_str("FAILunknown command"); - else + } else { func_cb(ep, req); + } if (req->status == 0) { *cmdbuf = '\0'; diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c index 7f72972..b3e178a 100644 --- a/drivers/usb/gadget/mpc8xx_udc.c +++ b/drivers/usb/gadget/mpc8xx_udc.c @@ -897,7 +897,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) pkt_len = urb->actual_length - epi->sent; if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) { - pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT); + pkt_len = min(epi->tx_packetSize, EP_MAX_PKT); } for (x = 0; x < pkt_len; x++) { @@ -942,7 +942,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */ epi->sent += pkt_len; - epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize); + epi->last = min(urb->actual_length - epi->sent, epi->tx_packetSize); TOGGLE_TX_PID (ep_ref[ep].pid); if (epi->sent >= epi->tx_urb->actual_length) { diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 733558d..efd5c7f 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -65,7 +65,7 @@ static int udc_write_urb(struct usb_endpoint_instance *endpoint) if (!urb || !urb->actual_length) return -1; - n = MIN(urb->actual_length - endpoint->sent, endpoint->tx_packetSize); + n = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize); if (n <= 0) return -1; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/video/Kconfig diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/watchdog/Kconfig diff --git a/dts/Kconfig b/dts/Kconfig new file mode 100644 index 0000000..83ba7a6 --- /dev/null +++ b/dts/Kconfig @@ -0,0 +1,55 @@ +# +# Device Tree Control +# +# TODO: +# This feature is not currently supported for SPL, +# but this restriction should be removed in the future. + +config SUPPORT_OF_CONTROL + bool + +menu "Device Tree Control" + depends on !SPL_BUILD + depends on SUPPORT_OF_CONTROL + +config OF_CONTROL + bool "Run-time configuration via Device Tree" + help + This feature provides for run-time configuration of U-Boot + via a flattened device tree. + +choice + prompt "Provider of DTB for DT control" + depends on OF_CONTROL + +config OF_SEPARATE + bool "Separate DTB for DT control" + depends on !SANDBOX + help + If this option is enabled, the device tree will be built and + placed as a separate u-boot.dtb file alongside the U-Boot image. + +config OF_EMBED + bool "Embedded DTB for DT control" + help + If this option is enabled, the device tree will be picked up and + built into the U-Boot image. + +config OF_HOSTFILE + bool "Host filed DTB for DT control" + depends on SANDBOX + help + If this option is enabled, DTB will be read from a file on startup. + This is only useful for Sandbox. Use the -d flag to U-Boot to + specify the file to read. + +endchoice + +config DEFAULT_DEVICE_TREE + string "Default Device Tree for DT control" + help + This option specifies the default Device Tree used for DT control. + It can be overrided from the command line: + $ make DEVICE_TREE=<device-tree-name> + +endmenu diff --git a/fs/Kconfig b/fs/Kconfig new file mode 100644 index 0000000..41bb0b9 --- /dev/null +++ b/fs/Kconfig @@ -0,0 +1,19 @@ +# +# File system configuration +# + +menu "File systems" + +source "fs/ext4/Kconfig" + +source "fs/reiserfs/Kconfig" + +source "fs/fat/Kconfig" + +source "fs/jffs2/Kconfig" + +source "fs/ubifs/Kconfig" + +source "fs/cramfs/Kconfig" + +endmenu diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/cramfs/Kconfig diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/ext4/Kconfig diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/fat/Kconfig diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/jffs2/Kconfig diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/reiserfs/Kconfig diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/ubifs/Kconfig diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c index 099d517..818d3d9 100644 --- a/fs/zfs/zfs.c +++ b/fs/zfs/zfs.c @@ -772,7 +772,7 @@ zap_leaf_array_equal(zap_leaf_phys_t *l, zfs_endian_t endian, while (bseen < array_len) { struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array; - int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); + int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft)) return 0; @@ -794,7 +794,7 @@ zap_leaf_array_get(zap_leaf_phys_t *l, zfs_endian_t endian, int blksft, while (bseen < array_len) { struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array; - int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); + int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft)) /* Don't use errno because this error is to be ignored. */ @@ -2118,7 +2118,7 @@ zfs_read(zfs_file_t file, char *buf, uint64_t len) data->file_start = blkid * blksz; data->file_end = data->file_start + blksz; - movesize = MIN(length, data->file_end - (int) file->offset - red); + movesize = min(length, data->file_end - (int)file->offset - red); memmove(buf, data->file_buf + file->offset + red - data->file_start, movesize); diff --git a/include/common.h b/include/common.h index 97c04df..d5020c8 100644 --- a/include/common.h +++ b/include/common.h @@ -181,9 +181,6 @@ typedef void (interrupt_handler_t)(void *); typeof(Y) __y = (Y); \ (__x > __y) ? __x : __y; }) -#define MIN(x, y) min(x, y) -#define MAX(x, y) max(x, y) - #define min3(X, Y, Z) \ ({ typeof(X) __x = (X); \ typeof(Y) __y = (Y); \ @@ -198,9 +195,6 @@ typedef void (interrupt_handler_t)(void *); __x > __y ? (__x > __z ? __x : __z) : \ (__y > __z ? __y : __z); }) -#define MIN3(x, y, z) min3(x, y, z) -#define MAX3(x, y, z) max3(x, y, z) - /* * Return the absolute value of a number. * diff --git a/include/compiler.h b/include/compiler.h index 9afc11b..1451916 100644 --- a/include/compiler.h +++ b/include/compiler.h @@ -129,9 +129,6 @@ typedef unsigned long int uintptr_t; #endif /* USE_HOSTCC */ -/* compiler options */ -#define uninitialized_var(x) x = x - #define likely(x) __builtin_expect(!!(x), 1) #define unlikely(x) __builtin_expect(!!(x), 0) diff --git a/include/config_cmd_defaults.h b/include/config_cmd_defaults.h deleted file mode 100644 index a55b268..0000000 --- a/include/config_cmd_defaults.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * config_cmd_defaults.h - sane defaults for everyone - * - * Copyright (c) 2010-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _CONFIG_CMD_DEFAULTS_H_ -#define _CONFIG_CMD_DEFAULTS_H_ - -#define CONFIG_CMD_BOOTM 1 -#define CONFIG_CMD_CRC32 1 -#define CONFIG_CMD_EXPORTENV 1 -#define CONFIG_CMD_GO 1 -#define CONFIG_CMD_IMPORTENV 1 - -#endif diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 90d9901..be616e8 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -53,10 +53,23 @@ #endif #ifdef CONFIG_CMD_SCSI -#define BOOTENV_SHARED_SCSI BOOTENV_SHARED_BLKDEV(scsi) +#define BOOTENV_RUN_SCSI_INIT "run scsi_init; " +#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; " +#define BOOTENV_SHARED_SCSI \ + "scsi_init=" \ + "if ${scsi_need_init}; then " \ + "setenv scsi_need_init false; " \ + "scsi scan; " \ + "fi\0" \ + \ + "scsi_boot=" \ + BOOTENV_RUN_SCSI_INIT \ + BOOTENV_SHARED_BLKDEV_BODY(scsi) #define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV #else +#define BOOTENV_RUN_SCSI_INIT +#define BOOTENV_SET_SCSI_NEED_INIT #define BOOTENV_SHARED_SCSI #define BOOTENV_DEV_SCSI \ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI @@ -189,7 +202,7 @@ \ BOOT_TARGET_DEVICES(BOOTENV_DEV) \ \ - "bootcmd=" BOOTENV_SET_USB_NEED_INIT \ + "bootcmd=" BOOTENV_SET_USB_NEED_INIT BOOTENV_SET_SCSI_NEED_INIT \ "for target in ${boot_targets}; do " \ "run bootcmd_${target}; " \ "done\0" diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 953d06b..9063c57 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -227,6 +227,7 @@ unsigned long get_board_ddr_clk(void); #endif /* EEPROM */ +#define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 @@ -819,9 +820,16 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE ulpi +#ifdef CONFIG_PPC_B4860 +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," \ + "bank_intlv=cs0_cs1;" \ + "en_cpc:cpc2;" +#else +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=null," \ - "bank_intlv=cs0_cs1;" \ + HWCONFIG \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 0ee0ff2..5e2c100 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -19,6 +19,9 @@ #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg #endif #ifdef CONFIG_T1042RDB_PI +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg +#endif +#ifdef CONFIG_T1042RDB #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg #endif @@ -477,7 +480,7 @@ /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define I2C_MUX_CH_DEFAULT 0x8 #endif @@ -503,6 +506,7 @@ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_BAR #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -633,7 +637,7 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_QE #define CONFIG_U_QE #endif @@ -662,7 +666,7 @@ #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_QE_FW_ADDR 0x130000 #elif defined(CONFIG_SDCARD) @@ -686,7 +690,7 @@ #endif #ifdef CONFIG_FMAN_ENET -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 #endif #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 @@ -788,13 +792,14 @@ #define CONFIG_BAUDRATE 115200 #define __USB_PHY_TYPE utmi +#define RAMDISKFILE "t104xrdb/ramdisk.uboot" #ifdef CONFIG_T1040RDB #define FDTFILE "t1040rdb/t1040rdb.dtb" -#define RAMDISKFILE "t1040rdb/ramdisk.uboot" -#elif CONFIG_T1042RDB_PI -#define FDTFILE "t1040rdb_pi/t1040rdb_pi.dtb" -#define RAMDISKFILE "t1040rdb_pi/ramdisk.uboot" +#elif defined(CONFIG_T1042RDB_PI) +#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" +#elif defined(CONFIG_T1042RDB) +#define FDTFILE "t1042rdb/t1042rdb.dtb" #endif #ifdef CONFIG_FSL_DIU_FB diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index aef0ad3..e2f7ead 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -23,9 +23,6 @@ # define CONFIG_TIMESTAMP # define CONFIG_LZO # ifdef CONFIG_ENABLE_VBOOT -# define CONFIG_OF_CONTROL -# define CONFIG_OF_SEPARATE -# define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack # define CONFIG_FIT_SIGNATURE # define CONFIG_RSA # endif @@ -405,8 +402,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 75f9933..43077cf 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -22,8 +22,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE /* Allow tracing to be enabled */ #define CONFIG_TRACE @@ -226,7 +224,6 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_MAX77686 -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale #define CONFIG_PREBOOT diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index c1eda96..d0828d5 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -137,7 +137,6 @@ #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/beaver.h b/include/configs/beaver.h index d8ed717..164b2dd 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -24,11 +24,6 @@ /* VDD core PMIC */ #define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 -/* Enable fdt support for Beaver. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-beaver -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (Beaver) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Beaver" diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 5db1819..0b66cdb 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -85,8 +85,6 @@ */ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 0x400 -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV /* @@ -102,7 +100,6 @@ #define CONFIG_CMD_MEMORY #undef CONFIG_GZIP #undef CONFIG_ZLIB -#undef CONFIG_CMD_BOOTM #undef CONFIG_BOOTM_RTEMS #undef CONFIG_BOOTM_LINUX diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 9e374c4..20f6ed1 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -155,7 +155,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 972eca9..c33d035 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -153,7 +153,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index c0dfe26..b497f26 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -136,7 +136,6 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 92c183e..0bca53f 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -179,7 +179,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 458868a..9d43b81 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -112,7 +112,6 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index b503528..0fda967 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -110,7 +110,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 3d36d84..ae4d83a 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -186,7 +186,6 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* FLASH/ETHERNET uses the same async bank */ #define SHARED_RESOURCES 1 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index a302f83..29f9316 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -254,7 +254,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* Define if want to do post memory test */ #undef CONFIG_POST diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 32df5ec..a655282 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -135,7 +135,6 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 1a245a2..da5f029 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -181,7 +181,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 3db917e..6871d8c 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -160,7 +160,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BAUDRATE 57600 #define CONFIG_SYS_PROMPT "Acvilon> " -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 0a309d9..fb6f948 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -102,7 +102,6 @@ * Misc Settings */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Run core 1 from L1 SRAM start address when init uboot on core 0 diff --git a/include/configs/br4.h b/include/configs/br4.h index f8d3158..3f24008 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -135,7 +135,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 3f889f8..e9d5d01 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -151,7 +151,6 @@ #undef CONFIG_CMD_NFS #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_XIMG -#undef CONFIG_CMD_CRC32 /* define command we need always */ #define CONFIG_CMD_ECHO #define CONFIG_CMD_SOURCE diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 59f429c..09129c7 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -24,11 +24,6 @@ /* VDD core PMIC */ #define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 -/* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-cardhu -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (Cardhu) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu" diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 8d3ae49..f5351ad 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -128,7 +128,6 @@ #define FLASHBOOT_ENV_SETTINGS \ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index 8bd499a..485f01a 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -97,7 +97,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 47967d7..1729b44 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -146,7 +146,6 @@ "flashboot=flread 20040000 1000000 3c0000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 88c9982..272aa74 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -143,7 +143,6 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 346e27f..7f27eda 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -117,7 +117,6 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 5265e5f..96910a7 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -99,7 +99,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h index 6f9e08c..2b876fe 100644 --- a/include/configs/colibri_t20_iris.h +++ b/include/configs/colibri_t20_iris.h @@ -9,11 +9,6 @@ #include "tegra20-common.h" -/* Enable FDT support */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Colibri) # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris" diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index eacff5b..782b9d1 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -11,9 +11,6 @@ #include "tegra30-common.h" -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-colibri -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define V_PROMPT "Colibri T30 # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T30" diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 7eaaf69..bfcfa0c 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -434,7 +434,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT -#undef CONFIG_CMD_BOOTM #endif /* CONFIG_TRAILBLAZER */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index a1a63a0..936be14 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -28,9 +28,6 @@ #define CONFIG_LMB #define CONFIG_OF_LIBFDT -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE -#define CONFIG_DEFAULT_DEVICE_TREE link #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 1252d7a..5f85755 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -157,8 +157,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 #endif @@ -376,8 +374,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index fd774a3..ff7ec4a 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -21,11 +21,6 @@ #include "tegra114-common.h" -/* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra114 (Dalmore) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore" diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 4143a4d..2eaabde 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -116,8 +116,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index a7fd43b..185edbe 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -102,7 +102,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(2, 30) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h index 7dac1a3..99472ac 100644 --- a/include/configs/exynos4-dt.h +++ b/include/configs/exynos4-dt.h @@ -22,10 +22,6 @@ #define CONFIG_BOARD_COMMON #define CONFIG_SYS_GENERIC_BOARD -/* Enable fdt support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - #define CONFIG_SYS_CACHELINE_SIZE 32 /* input clock of PLL: EXYNOS4 boards have 24MHz input clock */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index a7c6292..1dc3002 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -24,10 +24,6 @@ #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_EXYNOS_SPL -/* Enable fdt support for Exynos5250 */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* Allow tracing to be enabled */ #define CONFIG_TRACE #define CONFIG_CMD_TRACE diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 0e5c200..620f950 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -61,7 +61,7 @@ #define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_BUS 0 - #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) + #define CONFIG_SF_DEFAULT_CS 0 /* GPIO 3-19 (21248) */ #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 9470ad6..109cee9 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -116,7 +116,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } -#define CONFIG_CMD_IMPORTENV 1 #define CONFIG_CMD_LOADB #define CONFIG_CMD_SOURCE #define CONFIG_CMD_RUN diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 3ec0e41..ff9fbc9 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Harmony. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-harmony -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Harmony) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony" diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 3767502..ec510bd 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -133,7 +133,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_MISC_INIT_R /* needed for MAC address */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #undef CONFIG_SHOW_BOOT_PROGRESS /* Enable this if bootretry required; currently it's disabled */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index d03a66c..d67c025 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -12,11 +12,6 @@ #include "tegra124-common.h" -/* Enable fdt support for Jetson TK1. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra124-jetson-tk1 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra124 (Jetson TK1) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Jetson TK1" diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 43db581..51926f7 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -58,8 +58,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/kwb.h b/include/configs/kwb.h index 0860434..29b263f 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -89,7 +89,6 @@ #undef CONFIG_BOOTM_RTEMS #undef CONFIG_GZIP #undef CONFIG_ZLIB -#undef CONFIG_CMD_CRC32 /* USB configuration */ #define CONFIG_USB_MUSB_DSPS diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 657e3b6..bb47813 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -49,10 +49,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DDR_SPD #define SPD_EEPROM_ADDRESS 0x51 #define CONFIG_SYS_SPD_BUS_NUM 0 -#define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ +#ifndef CONFIG_SYS_FSL_DDR4 #define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ +#define CONFIG_SYS_DDR_RAW_TIMING +#endif #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 2bd5a47..a72e1f3 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -15,9 +15,11 @@ #define CONFIG_GICV3 /* Link Definitions */ -#define CONFIG_SYS_TEXT_BASE 0x30000000 +#define CONFIG_SYS_TEXT_BASE 0x30001000 +#ifdef CONFIG_EMU #define CONFIG_SYS_NO_FLASH +#endif #define CONFIG_SUPPORT_RAW_INITRD @@ -45,13 +47,27 @@ #define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */ -/* SMP Definitions */ -#define CPU_RELEASE_ADDR CONFIG_SYS_INIT_SP_ADDR - #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 2 + +/* + * SMP Definitinos + */ +#define CPU_RELEASE_ADDR secondary_boot_func + +#define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS +#define CONFIG_SYS_DP_DDR_BASE 0x6000000000ULL +/* + * DDR controller use 0 as the base address for binding. + * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. + */ +#define CONFIG_SYS_DP_DDR_BASE_PHY 0 +#define CONFIG_DP_DDR_CTRL 2 +#define CONFIG_DP_DDR_NUM_CTRLS 1 +#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 12000000 /* 12MHz */ @@ -118,6 +134,66 @@ #define CONFIG_SYS_NOR_FTIM3 0x04000000 #define CONFIG_SYS_IFC_CCR 0x01000000 +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#endif + +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_MAX_ECCPOS 256 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_BASE 0x520000000 +#define CONFIG_SYS_NAND_BASE_PHYS 0x20000000 + +#define CONFIG_SYS_NAND_CSPR_EXT (0x0) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY #define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR @@ -167,6 +243,7 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) +#define CONFIG_ARCH_EARLY_INIT_R /* Physical Memory Map */ /* fixme: these need to be checked against the board */ @@ -174,7 +251,7 @@ #define CONFIG_SYS_CLK_FREQ 133333333 -#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_NR_DRAM_BANKS 3 #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h index a5cea63..487cd99 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2085a_emu.h @@ -13,6 +13,7 @@ #define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */ #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */ diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h index 46d47b0..0f40b78 100644 --- a/include/configs/ls2085a_simu.h +++ b/include/configs/ls2085a_simu.h @@ -13,4 +13,13 @@ #define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0x2210000) +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 + #endif /* __LS2_SIMU_H */ diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index bf5c1a1..a14bfe3 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -8,6 +8,8 @@ #ifndef _CONFIG_LSXL_H #define _CONFIG_LSXL_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ @@ -157,7 +159,7 @@ "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ "setenv ncip; setenv gatewayip; setenv ethact; " \ "setenv bootfile; setenv dnsip; " \ - "setenv bootsource hdd; run ser\0" \ + "setenv bootsource legacy; run ser\0" \ "restore_env=run standard_env; saveenv; reset\0" \ "ser=setenv stdin serial; setenv stdout serial; " \ "setenv stderr serial\0" \ diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index 40155c3..ac5208f 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Medcom-Wide. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-medcom-wide -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Medcom-Wide) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom-Wide" diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 1a82a57..bb07060 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -14,11 +14,6 @@ /* MicroBlaze CPU */ #define MICROBLAZE_V5 1 -/* Open Firmware DTS */ -#define CONFIG_OF_CONTROL 1 -#define CONFIG_OF_EMBED 1 -#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic - /* linear and spi flash memory */ #ifdef XILINX_FLASH_START #define FLASH diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index 0f2a4ef..fce7ead 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -96,11 +96,11 @@ #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST -#define CONFIG_SF_DEFAULT_CS (1 | 121 << 8) +#define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_ENV_SPI_CS (1 | 121 << 8) +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_ENV_SPI_MODE (SPI_MODE_0) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index e59a3b4..2d93d6c 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -74,7 +74,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 9) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 55b983c..fddedf1 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -205,7 +205,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 11) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 469591f..6d379ed 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -54,7 +54,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 25000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #endif diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 29dcc4a..b616ac2 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -16,8 +16,6 @@ #define CONFIG_SYS_PROMPT "Odroid # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-odroid #define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF diff --git a/include/configs/origen.h b/include/configs/origen.h index 5d24916..fb1536c 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_PROMPT "ORIGEN # " -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-origen /* High Level Configuration Options */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index dd0abf8..45bb470 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -20,11 +20,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Paz00. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-paz00 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Paz00) MOD # " #define CONFIG_TEGRA_BOARD_STRING "Compal Paz00" diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 5efcd76..7d102a4 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -128,8 +128,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #endif diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 88c093f..987cef5 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -13,8 +13,6 @@ #include <configs/exynos5420.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-peach-pit /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h new file mode 100644 index 0000000..a28d7b5 --- /dev/null +++ b/include/configs/ph1_ld4.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PH1_XXX_H +#define __PH1_XXX_H + +/* + * Support Card Select + * + * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. + * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. + * CPLD is re-programmed for ARIMA board compatibility. + * No define - No support card. + */ + +#if 0 +#define CONFIG_PFC_MICRO_SUPPORT_CARD +#else +#define CONFIG_DCC_MICRO_SUPPORT_CARD +#endif + +/* + * Serial Configuration + * SoC UART : enable CONFIG_UNIPHIER_SERIAL + * On-board UART: enable CONFIG_SYS_NS16550_SERIAL + */ +#if 1 +#define CONFIG_UNIPHIER_SERIAL +#else +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SYS_UNIPHIER_UART_CLK 36864000 + +#define CONFIG_SMC911X + +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +#define CONFIG_DDR_FREQ 1600 + +/* + * Memory Size & Mapping + */ +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 + +#define CONFIG_SPL_TEXT_BASE 0x40000 + +#include "uniphier-common.h" + +#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h new file mode 100644 index 0000000..b79967f --- /dev/null +++ b/include/configs/ph1_pro4.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PH1_XXX_H +#define __PH1_XXX_H + +/* + * Support Card Select + * + * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. + * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. + * CPLD is re-programmed for ARIMA board compatibility. + * No define - No support card. + */ + +#if 0 +#define CONFIG_PFC_MICRO_SUPPORT_CARD +#else +#define CONFIG_DCC_MICRO_SUPPORT_CARD +#endif + +/* + * Serial Configuration + * SoC UART : enable CONFIG_UNIPHIER_SERIAL + * On-board UART: enable CONFIG_SYS_NS16550_SERIAL + */ +#if 1 +#define CONFIG_UNIPHIER_SERIAL +#else +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SYS_UNIPHIER_UART_CLK 73728000 + +#define CONFIG_SMC911X + +#define CONFIG_DDR_NUM_CH0 2 +#define CONFIG_DDR_NUM_CH1 2 + +#define CONFIG_DDR_FREQ 1600 + +#define CONFIG_UNIPHIER_SMP + +/* + * Memory Size & Mapping + */ +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x20000000 +#define CONFIG_SDRAM1_BASE 0xa0000000 +#define CONFIG_SDRAM1_SIZE 0x20000000 + +#define CONFIG_SPL_TEXT_BASE 0x100000 + +#include "uniphier-common.h" + +#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h new file mode 100644 index 0000000..9d391f1 --- /dev/null +++ b/include/configs/ph1_sld8.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PH1_XXX_H +#define __PH1_XXX_H + +/* + * Support Card Select + * + * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. + * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. + * CPLD is re-programmed for ARIMA board compatibility. + * No define - No support card. + */ + +#if 0 +#define CONFIG_PFC_MICRO_SUPPORT_CARD +#else +#define CONFIG_DCC_MICRO_SUPPORT_CARD +#endif + +/* + * Serial Configuration + * SoC UART : enable CONFIG_UNIPHIER_SERIAL + * On-board UART: enable CONFIG_SYS_NS16550_SERIAL + */ +#if 1 +#define CONFIG_UNIPHIER_SERIAL +#else +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SYS_UNIPHIER_UART_CLK 80000000 + +#define CONFIG_SMC911X + +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +#define CONFIG_DDR_FREQ 1333 + +/* #define CONFIG_DDR_STANDARD */ + +/* + * Memory Size & Mapping + */ +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 + +#define CONFIG_SPL_TEXT_BASE 0x40000 + +#include "uniphier-common.h" + +#endif /* __PH1_XXX_H */ diff --git a/include/configs/plutux.h b/include/configs/plutux.h index a473f23..b663b89 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-plutux -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Plutux) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux" diff --git a/include/configs/pr1.h b/include/configs/pr1.h index e96ed4b..0f57e86 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -135,7 +135,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 20985da..082d51c 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-universal_c210 #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 0104d5f..c46baf2 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -298,8 +298,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index f5fa4b3..6972643 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -38,15 +38,12 @@ /* Number of bits in a C 'long' on this architecture */ #define CONFIG_SANDBOX_BITS_PER_LONG 64 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_HOSTFILE #define CONFIG_OF_LIBFDT #define CONFIG_LMB #define CONFIG_FIT #define CONFIG_FIT_SIGNATURE #define CONFIG_RSA #define CONFIG_CMD_FDT -#define CONFIG_DEFAULT_DEVICE_TREE sandbox #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FS_FAT @@ -94,7 +91,7 @@ #define CONFIG_ENV_SIZE 8192 #define CONFIG_ENV_IS_NOWHERE -/* SPI */ +/* SPI - enable all SPI flash types for testing purposes */ #define CONFIG_SANDBOX_SPI #define CONFIG_CMD_SF #define CONFIG_CMD_SF_TEST @@ -102,7 +99,13 @@ #define CONFIG_SPI_FLASH #define CONFIG_OF_SPI #define CONFIG_OF_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SPI_FLASH_EON +#define CONFIG_SPI_FLASH_GIGADEVICE +#define CONFIG_SPI_FLASH_MACRONIX #define CONFIG_SPI_FLASH_SANDBOX +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_SST #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index fc4f976..04e4f82 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -19,11 +19,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (SeaBoard) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 4747adf..71be823 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -1,5 +1,6 @@ /* - * (C) Copyright 2009 + * (C) Copyright 2009-2014 + * Gerald Kerma <dreagle@doukki.net> * Marvell Semiconductor <www.marvell.com> * Written-by: Prafulla Wadaskar <prafulla@marvell.com> * @@ -23,12 +24,26 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* + * Compression configuration + */ +#define CONFIG_BZIP2 +#define CONFIG_LZMA +#define CONFIG_LZO + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ + +/* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV +#define CONFIG_CMD_IDE #define CONFIG_CMD_MII #define CONFIG_CMD_MMC #define CONFIG_CMD_NAND @@ -54,8 +69,8 @@ * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x60000 -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ +#define CONFIG_ENV_ADDR 0x80000 +#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ /* * Default environment variables @@ -64,8 +79,10 @@ "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ "${x_bootcmd_usb}; bootm 0x6400000;" -#define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \ - "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0" +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:512K(uboot)," \ + "512K(env),1M(script),6M(kernel)," \ + "12M(ramdisk),4M(spare),-(rootfs)" #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ @@ -73,6 +90,11 @@ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" +#define MTDIDS_DEFAULT "nand0=orion_nand" + +#define MTDPARTS_DEFAULT \ + "mtdparts="CONFIG_MTDPARTS + /* * Ethernet Driver configuration */ @@ -92,9 +114,23 @@ #endif /* CONFIG_CMD_MMC */ /* + * SATA driver configuration + */ +#ifdef CONFIG_CMD_IDE +#define __io +#define CONFIG_IDE_PREINIT +#define CONFIG_DOS_PARTITION +#define CONFIG_MVSATA_IDE_USE_PORT0 +#define CONFIG_MVSATA_IDE_USE_PORT1 +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif /* CONFIG_CMD_IDE */ + +/* * File system */ #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 #define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBI diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index b8fb77e..bf9752f 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -167,8 +167,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 66fa179..6117094 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -11,8 +11,6 @@ #include <configs/exynos5250-dt.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250 /* Enable FIT support and comparison */ #define CONFIG_FIT diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 606739b..36a156f 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -15,8 +15,6 @@ #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-smdk5420 /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ diff --git a/include/configs/snow.h b/include/configs/snow.h index 673fa14..fbaaa59 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -11,8 +11,6 @@ #include <configs/exynos5250-dt.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow /* Enable FIT support and comparison */ #define CONFIG_FIT diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index a77ba69..6673026 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -116,7 +116,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index c4c1c57..9998343 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -145,7 +145,6 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 13baa76..51f87da 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -10,11 +10,6 @@ #include "tegra30-common.h" -/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-tec-ng -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (TEC-NG) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier" diff --git a/include/configs/tec.h b/include/configs/tec.h index 90e7b7a..9ea4ff4 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-tec -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (TEC) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index c337e30..23e3c8a 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -69,7 +69,6 @@ /* remove devicetree support */ #ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_CONTROL #endif /* remove I2C support */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 6fa646b..43751e7 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -16,8 +16,6 @@ #define CONFIG_TRATS -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-trats #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 1450865..e9a04f7 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -15,8 +15,6 @@ #define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-trats2 #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index f81cfa2..7c00642 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-trimslice -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (TrimSlice) # " #define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice" diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 1dd13fd..9a62070 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -222,8 +222,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h new file mode 100644 index 0000000..18fe277 --- /dev/null +++ b/include/configs/uniphier-common.h @@ -0,0 +1,266 @@ +/* + * Copyright (C) 2012-2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* U-boot - Common settings for UniPhier Family */ + +#ifndef __CONFIG_UNIPHIER_COMMON_H__ +#define __CONFIG_UNIPHIER_COMMON_H__ + +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \ + defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \ +are defined. Select only one of them." +#endif + +/* + * Support card address map + */ +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) +# define CONFIG_SUPPORT_CARD_BASE 0x03f00000 +# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) +# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) +# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000) +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +# define CONFIG_SUPPORT_CARD_BASE 0x08000000 +# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) +# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630) +# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000) +#endif + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE +#define CONFIG_SYS_NS16550_CLK 12288000 +#define CONFIG_SYS_NS16550_REG_SIZE -2 + +#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE +#define CONFIG_SMC911X_32_BIT + +#define CONFIG_SYS_UNIPHIER_SERIAL_BASE0 0x54006800 +#define CONFIG_SYS_UNIPHIER_SERIAL_BASE1 0x54006900 +#define CONFIG_SYS_UNIPHIER_SERIAL_BASE2 0x54006a00 +#define CONFIG_SYS_UNIPHIER_SERIAL_BASE3 0x54006b00 + +/*----------------------------------------------------------------------- + * MMU and Cache Setting + *----------------------------------------------------------------------*/ + +/* Comment out the following to enable L1 cache */ +/* #define CONFIG_SYS_ICACHE_OFF */ +/* #define CONFIG_SYS_DCACHE_OFF */ + +/* Comment out the following to enable L2 cache */ +#define CONFIG_UNIPHIER_L2CACHE_ON + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +#define CONFIG_TIMESTAMP + +/* FLASH related */ +#define CONFIG_MTD_DEVICE + +/* + * uncomment the following to disable FLASH related code. + */ +/* #define CONFIG_SYS_NO_FLASH */ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI + +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_MONITOR_BASE 0 +#define CONFIG_SYS_FLASH_BASE 0 + +/* + * flash_toggle does not work for out supoort card. + * We need to use flash_status_poll. + */ +#define CONFIG_SYS_CFI_FLASH_STATUS_POLL + +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000} +# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000} +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000} +# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000} +#endif + +/* serial console configuration */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_GENERIC_BOARD + +#if !defined(CONFIG_SPL_BUILD) +#define CONFIG_USE_ARCH_MEMSET +#define CONFIG_USE_ARCH_MEMCPY +#endif + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_CONS_INDEX 1 + +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/canyonlands/u-boot-nand.lds for details. + */ +/* #define CONFIG_ENV_IS_IN_NAND */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x0 +/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ + +/* Time clock 1MHz */ +#define CONFIG_SYS_TIMER_RATE 1000000 + +/* + * By default, ARP timeout is 5 sec. + * The first ARP request does not seem to work. + * So we need to retry ARP request anyway. + * We want to shrink the interval until the second ARP request. + */ +#define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_TIME +#define CONFIG_CMD_NAND /* NAND flash suppport */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 2 +#define CONFIG_SYS_NAND_ONFI_DETECTION + +#define CONFIG_NAND_DENALI_ECC_SIZE 1024 + +#define CONFIG_SYS_NAND_REGS_BASE 0x68100000 +#define CONFIG_SYS_NAND_DATA_BASE 0x68000000 + +#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) + +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 + +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * Network Configuration + */ +#define CONFIG_ETHADDR 00:21:83:24:00:00 +#define CONFIG_SERVERIP 192.168.11.1 +#define CONFIG_IPADDR 192.168.11.10 +#define CONFIG_GATEWAYIP 192.168.11.1 +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_LOADADDR 0x84000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_BOOTFILE "fit.itb" + +#define CONFIG_CMDLINE_EDITING /* add command line history */ + +#define CONFIG_BOOTCOMMAND "run $bootmode" + +#define CONFIG_ROOTPATH "/nfs/root/path" +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs $bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ + "tftpboot; bootm;" + +#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "image_offset=0x00080000\0" \ + "image_size=0x00f00000\0" \ + "verify=n\0" \ + "autostart=yes\0" \ + "norboot=run add_default_bootargs;" \ + "bootm $image_offset\0" \ + "nandboot=run add_default_bootargs;" \ + "nand read $loadaddr $image_offset $image_size;" \ + "bootm\0" \ + "add_default_bootargs=setenv bootargs $bootargs" \ + " console=ttyS0,$baudrate\0" \ + +/* FIT support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ + +/* Open Firmware flat tree */ +#define CONFIG_OF_LIBFDT + +#define CONFIG_HAVE_ARM_SECURE + +/* Memory Size & Mapping */ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE + +#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE +/* Thre is no memory hole */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE) +#else +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE) +#endif + +#define CONFIG_SYS_TEXT_BASE 0x84000000 + +#if defined(CONFIG_SPL_BUILD) +#define CONFIG_BOARD_POSTCLK_INIT +#else +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000) +#define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000) + +#define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000) + +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_NAND_SUPPORT + +#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ +#define CONFIG_SPL_LIBGENERIC_SUPPORT + +#define CONFIG_SPL_BOARD_INIT + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 + +#endif /* __CONFIG_UNIPHIER_COMMON_H__ */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 5ab4de3..217ba2f 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -296,7 +296,6 @@ int vct_gpio_get(int pin); #undef CONFIG_CMD_BEDBUG #undef CONFIG_CMD_CACHE #undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_CRC32 #undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_EEPROM diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 6d4e999..6897aa8 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -12,11 +12,6 @@ #include "tegra124-common.h" -/* Enable fdt support for Venice2. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra124-venice2 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra124 (Venice2) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2" diff --git a/include/configs/ventana.h b/include/configs/ventana.h index edf3720..f195f8a 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Ventana. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-ventana -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Ventana) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana" diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 0897932..f3af971 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -51,7 +51,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT -#define CONFIG_DEFAULT_DEVICE_TREE vexpress64 /* SMP Spin Table Definitions */ #ifdef CONFIG_BASE_FVP diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 6891bf8..3f35076 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -57,11 +57,11 @@ * Use gpio 4 pin 25 as chip select for SPI flash * This corresponds to gpio 121 */ -#define CONFIG_SF_DEFAULT_CS (1 | (121 << 8)) +#define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_ENV_SPI_CS (1 | (121 << 8)) +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 9e09f03..10e70d2 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-whistler -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Whistler) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler" diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 875cb43..0b4dd66 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -227,8 +227,6 @@ #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ /* FDT support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define CONFIG_DISPLAY_BOARDINFO_LATE /* RSA support */ @@ -273,18 +271,13 @@ #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT -#if defined(CONFIG_OF_CONTROL) && defined(CONFIG_OF_SEPARATE) -# define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -#else -# define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -#endif +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img" #endif /* Disable dcache for SPL just for sure */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_DCACHE_OFF #undef CONFIG_FPGA -#undef CONFIG_OF_CONTROL #endif /* Address in RAM where the parameters must be copied by SPL. */ @@ -303,9 +296,7 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 -#define CONFIG_SPL_SPI_CS 0 #endif /* for booting directly linux */ diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index b0328a2..549a664 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_SDHCI0 -#define CONFIG_DEFAULT_DEVICE_TREE zynq-microzed #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 291a5fe..b659054 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -23,7 +23,6 @@ #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQ_BOOT_FREEBSD -#define CONFIG_DEFAULT_DEVICE_TREE zynq-zc702 #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 8aa96e7..16b9047 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -20,18 +20,15 @@ # define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm010 #elif defined(CONFIG_ZC770_XM012) # define CONFIG_ZYNQ_SERIAL_UART1 # undef CONFIG_SYS_NO_FLASH -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm012 #elif defined(CONFIG_ZC770_XM013) # define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 # define CONFIG_ZYNQ_GEM_PHY_ADDR1 7 -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm013 #else # define CONFIG_ZYNQ_SERIAL_UART0 diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index ce17d40..946de95 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -21,7 +21,6 @@ #define CONFIG_ZYNQ_USB #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_BOOT_FREEBSD -#define CONFIG_DEFAULT_DEVICE_TREE zynq-zed #include <configs/zynq-common.h> diff --git a/include/fb_mmc.h b/include/fb_mmc.h new file mode 100644 index 0000000..1ad1d13 --- /dev/null +++ b/include/fb_mmc.h @@ -0,0 +1,8 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void fb_mmc_flash_write(const char *cmd, void *download_buffer, + unsigned int download_bytes, char *response); diff --git a/include/fdt_support.h b/include/fdt_support.h index 1bda686..c3d1fbc 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -133,6 +133,18 @@ static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); } +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const fdt32_t *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | fdt32_to_cpu(*(cell++)); + return r; +} + +void of_bus_default_count_cells(void *blob, int parentoffset, + int *addrc, int *sizec); + #endif /* ifdef CONFIG_OF_LIBFDT */ #ifdef USE_HOSTCC diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 5c49b22..675557a 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -15,6 +15,11 @@ #include <common_timing_params.h> +#ifndef CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS +/* All controllers are for main memory */ +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS CONFIG_NUM_DDR_CONTROLLERS +#endif + #ifdef CONFIG_SYS_FSL_DDR_LE #define ddr_in32(a) in_le32(a) #define ddr_out32(a, v) out_le32(a, v) @@ -57,6 +62,13 @@ typedef struct { memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS]; common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS]; fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS]; + unsigned int first_ctrl; + unsigned int num_ctrls; + unsigned long long mem_base; + unsigned int dimm_slots_per_ctrl; + int (*board_need_mem_reset)(void); + void (*board_mem_reset)(void); + void (*board_mem_de_reset)(void); } fsl_ddr_info_t; /* Compute steps */ @@ -72,7 +84,6 @@ typedef struct { unsigned long long fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, unsigned int size_only); - const char *step_to_string(unsigned int step); unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts, @@ -102,7 +113,7 @@ void fsl_ddr_set_lawbar( int fsl_ddr_interactive_env_var_exists(void); unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set); void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num); + unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl); int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr); diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index 987119b..5b03c14 100644 --- a/include/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -51,7 +51,6 @@ typedef ddr2_spd_eeprom_t generic_spd_eeprom_t; #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2 #endif #elif defined(CONFIG_SYS_FSL_DDR3) -#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #ifndef CONFIG_FSL_SDRAM_TYPE #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR3 @@ -352,7 +351,6 @@ typedef struct memctl_options_s { unsigned int twot_en; unsigned int threet_en; unsigned int bstopre; - unsigned int tcke_clock_pulse_width_ps; /* tCKE */ unsigned int tfaw_window_four_activates_ps; /* tFAW -- FOUR_ACT */ /* Rtt impedance */ @@ -379,12 +377,20 @@ typedef struct memctl_options_s { unsigned int trwt; /* read-to-write turnaround */ } memctl_options_t; -extern phys_size_t fsl_ddr_sdram(void); -extern phys_size_t fsl_ddr_sdram_size(void); +phys_size_t fsl_ddr_sdram(void); +phys_size_t fsl_ddr_sdram_size(void); +phys_size_t fsl_other_ddr_sdram(unsigned long long base, + unsigned int first_ctrl, + unsigned int num_ctrls, + unsigned int dimm_slots_per_ctrl, + int (*board_need_reset)(void), + void (*board_reset)(void), + void (*board_de_reset)(void)); extern int fsl_use_spd(void); -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num, int step); +void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num, int step); u32 fsl_ddr_get_intl3r(void); +void print_ddr_info(unsigned int start_ctrl); static void __board_assert_mem_reset(void) { diff --git a/include/linker_lists.h b/include/linker_lists.h index 557e627..507d61b 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -28,11 +28,11 @@ * together. Assuming _list and _entry are the list and entry names, * then the corresponding input section name is * - * _u_boot_list + _2_ + @_list + _2_ + @_entry + * .u_boot_list_ + 2_ + @_list + _2_ + @_entry * * and the C variable name is * - * .u_boot_list_ + 2_ + @_list + _2_ + @_entry + * _u_boot_list + _2_ + @_list + _2_ + @_entry * * This ensures uniqueness for both input section and C variable name. * diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 02ae99e..e057bd2 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -64,8 +64,12 @@ #endif #define __deprecated __attribute__((deprecated)) +#ifndef __packed #define __packed __attribute__((packed)) +#endif +#ifndef __weak #define __weak __attribute__((weak)) +#endif /* * it doesn't make sense on ARM (currently the only user of __naked) to trace @@ -91,8 +95,12 @@ * would be. * [...] */ +#ifndef __pure #define __pure __attribute__((pure)) +#endif +#ifndef __aligned #define __aligned(x) __attribute__((aligned(x))) +#endif #define __printf(a, b) __attribute__((format(printf, a, b))) #define __scanf(a, b) __attribute__((format(scanf, a, b))) #define noinline __attribute__((noinline)) @@ -115,4 +123,6 @@ */ #define uninitialized_var(x) x = x +#ifndef __always_inline #define __always_inline inline __attribute__((always_inline)) +#endif diff --git a/include/spi.h b/include/spi.h index ffd6647..b673be2 100644 --- a/include/spi.h +++ b/include/spi.h @@ -30,24 +30,24 @@ #define SPI_XFER_MMAP 0x08 /* Memory Mapped start */ #define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */ #define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END) -#define SPI_XFER_U_PAGE (1 << 5) +#define SPI_XFER_U_PAGE (1 << 5) /* SPI TX operation modes */ -#define SPI_OPM_TX_QPP 1 << 0 +#define SPI_OPM_TX_QPP (1 << 0) /* SPI RX operation modes */ -#define SPI_OPM_RX_AS 1 << 0 -#define SPI_OPM_RX_DOUT 1 << 1 -#define SPI_OPM_RX_DIO 1 << 2 -#define SPI_OPM_RX_QOF 1 << 3 -#define SPI_OPM_RX_QIOF 1 << 4 -#define SPI_OPM_RX_EXTN SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \ +#define SPI_OPM_RX_AS (1 << 0) +#define SPI_OPM_RX_DOUT (1 << 1) +#define SPI_OPM_RX_DIO (1 << 2) +#define SPI_OPM_RX_QOF (1 << 3) +#define SPI_OPM_RX_QIOF (1 << 4) +#define SPI_OPM_RX_EXTN (SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \ SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \ - SPI_OPM_RX_QIOF + SPI_OPM_RX_QIOF) -/* SPI bus connection options */ -#define SPI_CONN_DUAL_SHARED 1 << 0 -#define SPI_CONN_DUAL_SEPARATED 1 << 1 +/* SPI bus connection options - see enum spi_dual_flash */ +#define SPI_CONN_DUAL_SHARED (1 << 0) +#define SPI_CONN_DUAL_SEPARATED (1 << 1) /* Header byte that marks the start of the message */ #define SPI_PREAMBLE_END_BYTE 0xec diff --git a/include/spi_flash.h b/include/spi_flash.h index 2db53c7..408a5b4 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -19,6 +19,19 @@ #include <linux/types.h> #include <linux/compiler.h> +#ifndef CONFIG_SF_DEFAULT_SPEED +# define CONFIG_SF_DEFAULT_SPEED 1000000 +#endif +#ifndef CONFIG_SF_DEFAULT_MODE +# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#endif +#ifndef CONFIG_SF_DEFAULT_CS +# define CONFIG_SF_DEFAULT_CS 0 +#endif +#ifndef CONFIG_SF_DEFAULT_BUS +# define CONFIG_SF_DEFAULT_BUS 0 +#endif + /* sf param flags */ #define SECT_4K 1 << 1 #define SECT_32K 1 << 2 diff --git a/lib/Kconfig b/lib/Kconfig new file mode 100644 index 0000000..88e5da7 --- /dev/null +++ b/lib/Kconfig @@ -0,0 +1,11 @@ +menu "Library routines" + +config CC_OPTIMIZE_LIBS_FOR_SPEED + bool "Optimize libraries for speed" + help + Enabling this option will pass "-O2" to gcc when compiling + under "lib" directory. + + If unsure, say N. + +endmenu diff --git a/net/Kconfig b/net/Kconfig new file mode 100644 index 0000000..22b9eaa --- /dev/null +++ b/net/Kconfig @@ -0,0 +1,10 @@ +# +# Network configuration +# + +menuconfig NET + bool "Networking support" + +if NET + +endif # if NET diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf index 44c3997..ced2b9a 100644 --- a/scripts/Makefile.autoconf +++ b/scripts/Makefile.autoconf @@ -74,7 +74,6 @@ define filechk_config_h | sed '/=/ {s/=/ /;q; } ; { s/$$/ 1/; }'; \ done; \ echo \#define CONFIG_BOARDDIR board/$(if $(VENDOR),$(VENDOR)/)$(BOARD);\ - echo \#include \<config_cmd_defaults.h\>; \ echo \#include \<config_defaults.h\>; \ echo \#include \<configs/$(CONFIG_SYS_CONFIG_NAME).h\>; \ echo \#include \<asm/config.h\>; \ diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 3fed5e4..74db2e2 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2148,7 +2148,7 @@ sub process { "please, no space before tabs\n" . $herevet) && $fix) { while ($fixed[$linenr - 1] =~ - s/(^\+.*) {8,8}+\t/$1\t\t/) {} + s/(^\+.*) {8,8}\t/$1\t\t/) {} while ($fixed[$linenr - 1] =~ s/(^\+.*) +\t/$1\t/) {} } diff --git a/test/cmd_repeat.sh b/test/cmd_repeat.sh new file mode 100755 index 0000000..990e799 --- /dev/null +++ b/test/cmd_repeat.sh @@ -0,0 +1,29 @@ +#!/bin/sh + +# Test for U-Boot cli including command repeat + +BASE="$(dirname $0)" +. $BASE/common.sh + +run_test() { + ./${OUTPUT_DIR}/u-boot <<END +setenv ctrlc_ignore y +md 0 + +reset +END +} +check_results() { + echo "Check results" + + grep -q 00000100 ${tmp} || fail "Command did not repeat" +} + +echo "Test CLI repeat" +echo +tmp="$(tempfile)" +build_uboot +run_test >${tmp} +check_results ${tmp} +rm ${tmp} +echo "Test passed" diff --git a/test/common.sh b/test/common.sh new file mode 100644 index 0000000..702d1ed --- /dev/null +++ b/test/common.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +OUTPUT_DIR=sandbox + +fail() { + echo "Test failed: $1" + if [ -n ${tmp} ]; then + rm ${tmp} + fi + exit 1 +} + +build_uboot() { + echo "Build sandbox" + OPTS="O=${OUTPUT_DIR} $1" + NUM_CPUS=$(grep -c processor /proc/cpuinfo) + echo ${OPTS} + make ${OPTS} sandbox_config + make ${OPTS} -s -j${NUM_CPUS} +} diff --git a/test/trace/test-trace.sh b/test/trace/test-trace.sh index aa02f09..3e8651e 100755 --- a/test/trace/test-trace.sh +++ b/test/trace/test-trace.sh @@ -5,39 +5,25 @@ # Simple test script for tracing with sandbox -OUTPUT_DIR=sandbox TRACE_OPT="FTRACE=1" -fail() { - echo "Test failed: $1" - if [ -n ${tmp} ]; then - rm ${tmp} - fi - exit 1 -} - -build_uboot() { - echo "Build sandbox" - OPTS="O=${OUTPUT_DIR} ${TRACE_OPT}" - NUM_CPUS=$(grep -c processor /proc/cpuinfo) - make ${OPTS} sandbox_config - make ${OPTS} -s -j${NUM_CPUS} -} +BASE="$(dirname $0)/.." +. $BASE/common.sh run_trace() { echo "Run trace" ./${OUTPUT_DIR}/u-boot <<END - trace stats - hash sha256 0 10000 - trace pause - trace stats - hash sha256 0 10000 - trace stats - trace resume - hash sha256 0 10000 - trace pause - trace stats - reset +trace stats +hash sha256 0 10000 +trace pause +trace stats +hash sha256 0 10000 +trace stats +trace resume +hash sha256 0 10000 +trace pause +trace stats +reset END } @@ -69,7 +55,7 @@ check_results() { echo "Simple trace test / sanity check using sandbox" echo tmp="$(tempfile)" -build_uboot +build_uboot "${TRACE_OPT}" run_trace >${tmp} check_results ${tmp} rm ${tmp} diff --git a/tools/buildman/control.py b/tools/buildman/control.py index e97350f..8b8c826 100644 --- a/tools/buildman/control.py +++ b/tools/buildman/control.py @@ -244,13 +244,13 @@ def DoBuildman(options, args, toolchains=None, make_func=None, boards=None, Print(GetActionSummary(options.summary, commits, board_selected, options)) + # We can't show function sizes without board details at present + if options.show_bloat: + options.show_detail = True builder.SetDisplayOptions(options.show_errors, options.show_sizes, options.show_detail, options.show_bloat, options.list_error_boards) if options.summary: - # We can't show function sizes without board details at present - if options.show_bloat: - options.show_detail = True builder.ShowSummary(commits, board_selected) else: fail, warned = builder.BuildBoards(commits, board_selected, diff --git a/tools/env/Makefile b/tools/env/Makefile index 4927489..40164f7 100644 --- a/tools/env/Makefile +++ b/tools/env/Makefile @@ -21,14 +21,16 @@ HOST_EXTRACFLAGS += -DMTD_OLD endif always := fw_printenv -hostprogs-y := fw_printenv_unstripped +hostprogs-y := fw_printenv -fw_printenv_unstripped-objs := fw_env.o fw_env_main.o \ +fw_printenv-objs := fw_env.o fw_env_main.o \ crc32.o ctype.o linux_string.o \ env_attr.o env_flags.o aes.o -quiet_cmd_strip = STRIP $@ - cmd_strip = $(STRIP) -o $@ $< +quiet_cmd_crosstools_strip = STRIP $^ + cmd_crosstools_strip = $(STRIP) $^; touch $@ -$(obj)/fw_printenv: $(obj)/fw_printenv_unstripped FORCE - $(call if_changed,strip) +$(obj)/.strip: $(obj)/fw_printenv + $(call cmd,crosstools_strip) + +always += .strip diff --git a/tools/genboardscfg.py b/tools/genboardscfg.py index 654100b..23c956b 100755 --- a/tools/genboardscfg.py +++ b/tools/genboardscfg.py @@ -328,6 +328,9 @@ class MaintainersDatabase: maintainers = [] status = '-' for line in open(file): + # Check also commented maintainers + if line[:3] == '#M:': + line = line[1:] tag, rest = line[:2], line[2:].strip() if tag == 'M:': maintainers.append(rest) diff --git a/tools/patman/README b/tools/patman/README index 5fb508b..e466886 100644 --- a/tools/patman/README +++ b/tools/patman/README @@ -27,8 +27,8 @@ Series-to: fred.blogs@napier.co.nz in one of your commits, the series will be sent there. -In Linux this will also call get_maintainer.pl on each of your -patches automatically. +In Linux and U-Boot this will also call get_maintainer.pl on each of your +patches automatically (unless you use -m to disable this). How to use this tool diff --git a/tools/patman/patman.py b/tools/patman/patman.py index 2ab6b35..6c6473e 100755 --- a/tools/patman/patman.py +++ b/tools/patman/patman.py @@ -32,6 +32,9 @@ parser.add_option('-c', '--count', dest='count', type='int', parser.add_option('-i', '--ignore-errors', action='store_true', dest='ignore_errors', default=False, help='Send patches email even if patch errors are found') +parser.add_option('-m', '--no-maintainers', action='store_false', + dest='add_maintainers', default=True, + help="Don't cc the file maintainers automatically") parser.add_option('-n', '--dry-run', action='store_true', dest='dry_run', default=False, help="Do a dry run (create but don't email patches)") parser.add_option('-p', '--project', default=project.DetectProject(), @@ -142,7 +145,8 @@ else: ok = True cc_file = series.MakeCcFile(options.process_tags, cover_fname, - not options.ignore_bad_tags) + not options.ignore_bad_tags, + options.add_maintainers) # Email the patches out (giving the user time to check / cancel) cmd = '' diff --git a/tools/patman/series.py b/tools/patman/series.py index 88c0d87..b67f870 100644 --- a/tools/patman/series.py +++ b/tools/patman/series.py @@ -201,7 +201,8 @@ class Series(dict): str = 'Change log exists, but no version is set' print col.Color(col.RED, str) - def MakeCcFile(self, process_tags, cover_fname, raise_on_error): + def MakeCcFile(self, process_tags, cover_fname, raise_on_error, + add_maintainers): """Make a cc file for us to use for per-commit Cc automation Also stores in self._generated_cc to make ShowActions() faster. @@ -211,6 +212,7 @@ class Series(dict): cover_fname: If non-None the name of the cover letter. raise_on_error: True to raise an error when an alias fails to match, False to just print a message. + add_maintainers: Call the get_maintainers to CC maintainers Return: Filename of temp file created """ @@ -225,7 +227,8 @@ class Series(dict): raise_on_error=raise_on_error) list += gitutil.BuildEmailList(commit.cc_list, raise_on_error=raise_on_error) - list += get_maintainer.GetMaintainer(commit.patch) + if add_maintainers: + list += get_maintainer.GetMaintainer(commit.patch) all_ccs += list print >>fd, commit.patch, ', '.join(list) self._generated_cc[commit.patch] = list diff --git a/tools/reformat.py b/tools/reformat.py deleted file mode 100755 index 61306d0..0000000 --- a/tools/reformat.py +++ /dev/null @@ -1,132 +0,0 @@ -#! /usr/bin/python -######################################################################## -# -# reorder and reformat a file in columns -# -# this utility takes lines from its standard input and reproduces them, -# partially reordered and reformatted, on its standard output. -# -# It has the same effect as a 'sort | column -t', with the exception -# that empty lines, as well as lines which start with a '#' sign, are -# not affected, i.e. they keep their position and formatting, and act -# as separators, i.e. the parts before and after them are each sorted -# separately (but overall field widths are computed across the whole -# input). -# -# Options: -# -i: -# --ignore-case: -# Do not consider case when sorting. -# -d: -# --default: -# What to chage empty fields to. -# -s <N>: -# --split=<N>: -# Treat only the first N whitespace sequences as separators. -# line content after the Nth separator will count as only one -# field even if it contains whitespace. -# Example : '-s 2' causes input 'a b c d e' to be split into -# three fields, 'a', 'b', and 'c d e'. -# -# boards.cfg requires -ids 6. -# -######################################################################## - -import sys, getopt, locale - -# ensure we sort using the C locale. - -locale.setlocale(locale.LC_ALL, 'C') - -# check options - -maxsplit = 0 -ignore_case = 0 -default_field ='' - -try: - opts, args = getopt.getopt(sys.argv[1:], "id:s:", - ["ignore-case","default","split="]) -except getopt.GetoptError as err: - print str(err) # will print something like "option -a not recognized" - sys.exit(2) - -for o, a in opts: - if o in ("-s", "--split"): - maxsplit = eval(a) - elif o in ("-i", "--ignore-case"): - ignore_case = 1 - elif o in ("-d", "--default"): - default_field = a - else: - assert False, "unhandled option" - -# collect all lines from standard input and, for the ones which must be -# reformatted and sorted, count their fields and compute each field's -# maximum size - -input_lines = [] -field_width = [] - -for line in sys.stdin: - # remove final end of line - input_line = line.strip('\n') - if (len(input_line)>0) and (input_line[0] != '#'): - # sortable line: split into fields - fields = input_line.split(None,maxsplit) - # if there are new fields, top up field_widths - for f in range(len(field_width), len(fields)): - field_width.append(0) - # compute the maximum witdh of each field - for f in range(len(fields)): - field_width[f] = max(field_width[f],len(fields[f])) - # collect the line for next stage - input_lines.append(input_line) - -# run through collected input lines, collect the ones which must be -# reformatted and sorted, and whenever a non-reformattable, non-sortable -# line is met, sort the collected lines before it and append them to the -# output lines, then add the non-sortable line too. - -output_lines = [] -sortable_lines = [] -for input_line in input_lines: - if (len(input_line)>0) and (input_line[0] != '#'): - # this line should be reformatted and sorted - input_fields = input_line.split(None,maxsplit) - output_fields = []; - # reformat each field to this field's column width - for f in range(len(input_fields)): - output_field = input_fields[f]; - output_fields.append(output_field.ljust(field_width[f])) - # any missing field is set to default if it exists - if default_field != '': - for f in range(len(input_fields),len(field_width)): - output_fields.append(default_field.ljust(field_width[f])) - # join fields using two spaces, like column -t would - output_line = ' '.join(output_fields); - # collect line for later - sortable_lines.append(output_line) - else: - # this line is non-sortable - # sort collected sortable lines - if ignore_case!=0: - sortable_lines.sort(key=lambda x: str.lower(locale.strxfrm(x))) - else: - sortable_lines.sort(key=lambda x: locale.strxfrm(x)) - # append sortable lines to the final output - output_lines.extend(sortable_lines) - sortable_lines = [] - # append non-sortable line to the final output - output_lines.append(input_line) -# maybe we had sortable lines pending, so append them to the final output -if ignore_case!=0: - sortable_lines.sort(key=lambda x: str.lower(locale.strxfrm(x))) -else: - sortable_lines.sort(key=lambda x: locale.strxfrm(x)) -output_lines.extend(sortable_lines) - -# run through output lines and print them, except rightmost whitespace - -for output_line in output_lines: - print output_line.rstrip() |