diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | board/cradle/Makefile | 43 | ||||
| -rw-r--r-- | board/cradle/cradle.c | 236 | ||||
| -rw-r--r-- | board/cradle/flash.c | 361 | ||||
| -rw-r--r-- | boards.cfg | 1 | ||||
| -rw-r--r-- | doc/README.scrapyard | 1 | ||||
| -rw-r--r-- | include/configs/cradle.h | 358 |
7 files changed, 1 insertions, 1000 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 7a5407c..7d6c97e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -905,7 +905,6 @@ Sughosh Ganu <urwithsughosh@gmail.com> Unknown / orphaned boards: Board CPU Last known maintainer / Comment ......................................................................... - cradle xscale/pxa Kyle Harris <kharris@nexus-tech.net> / dead address lubbock xscale/pxa Kyle Harris <kharris@nexus-tech.net> / dead address imx31_phycore_eet i.MX31 Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned diff --git a/board/cradle/Makefile b/board/cradle/Makefile deleted file mode 100644 index bdc91d8..0000000 --- a/board/cradle/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := cradle.o flash.o - -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c deleted file mode 100644 index 2bbf2d5..0000000 --- a/board/cradle/cradle.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <asm/arch/pxa-regs.h> -#include <common.h> -#include <netdev.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - - -/* local prototypes */ -void set_led (int led, int color); -void error_code_halt (int code); -int init_sio (int led, unsigned long base); -inline void cradle_outb (unsigned short val, unsigned long base, - unsigned long reg); -inline unsigned char cradle_inb (unsigned long base, unsigned long reg); -inline void sleep (int i); - -inline void -/**********************************************************/ -sleep (int i) -/**********************************************************/ -{ - while (i--) { - udelay (1000000); - } -} - -void -/**********************************************************/ -error_code_halt (int code) -/**********************************************************/ -{ - while (1) { - led_code (code, RED); - sleep (1); - led_code (0, OFF); - sleep (1); - } -} - -void -/**********************************************************/ -led_code (int code, int color) -/**********************************************************/ -{ - int i; - - code &= 0xf; /* only 4 leds */ - - for (i = 0; i < 4; i++) { - if (code & (1 << i)) { - set_led (i, color); - } else { - set_led (i, OFF); - } - } -} - -void -/**********************************************************/ -set_led (int led, int color) -/**********************************************************/ -{ - int shift = led * 2; - unsigned long mask = 0x3 << shift; - - writel(mask, GPCR2); /* clear bits */ - writel((color << shift), GPSR2); /* set bits */ - udelay (5000); -} - -inline void -/**********************************************************/ -cradle_outb (unsigned short val, unsigned long base, unsigned long reg) -/**********************************************************/ -{ - *(volatile unsigned short *) (base + (reg * 2)) = val; -} - -inline unsigned char -/**********************************************************/ -cradle_inb (unsigned long base, unsigned long reg) -/**********************************************************/ -{ - unsigned short val; - - val = *(volatile unsigned short *) (base + (reg * 2)); - return (val & 0xff); -} - -int -/**********************************************************/ -init_sio (int led, unsigned long base) -/**********************************************************/ -{ - unsigned char val; - - set_led (led, YELLOW); - val = cradle_inb (base, CRADLE_SIO_INDEX); - val = cradle_inb (base, CRADLE_SIO_INDEX); - if (val != 0) { - set_led (led, RED); - return -1; - } - - /* map SCC2 to COM1 */ - cradle_outb (0x01, base, CRADLE_SIO_INDEX); - cradle_outb (0x00, base, CRADLE_SIO_DATA); - - /* enable SCC2 extended regs */ - cradle_outb (0x40, base, CRADLE_SIO_INDEX); - cradle_outb (0xa0, base, CRADLE_SIO_DATA); - - /* enable SCC2 clock multiplier */ - cradle_outb (0x51, base, CRADLE_SIO_INDEX); - cradle_outb (0x04, base, CRADLE_SIO_DATA); - - /* enable SCC2 */ - cradle_outb (0x00, base, CRADLE_SIO_INDEX); - cradle_outb (0x04, base, CRADLE_SIO_DATA); - - /* map SCC2 DMA to channel 0 */ - cradle_outb (0x4f, base, CRADLE_SIO_INDEX); - cradle_outb (0x09, base, CRADLE_SIO_DATA); - - /* read ID from SIO to check operation */ - cradle_outb (0xe4, base, 0x3f8 + 0x3); - val = cradle_inb (base, 0x3f8 + 0x0); - if ((val & 0xf0) != 0x20) { - set_led (led, RED); - /* disable SCC2 */ - cradle_outb (0, base, CRADLE_SIO_INDEX); - cradle_outb (0, base, CRADLE_SIO_DATA); - return -1; - } - /* set back to bank 0 */ - cradle_outb (0, base, 0x3f8 + 0x3); - set_led (led, GREEN); - return 0; -} - -/* - * Miscelaneous platform dependent initialisations - */ - -int -/**********************************************************/ -board_late_init (void) -/**********************************************************/ -{ - return (0); -} - -int -/**********************************************************/ -board_init (void) -/**********************************************************/ -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - led_code (0xf, YELLOW); - - /* arch number of HHP Cradle */ - gd->bd->bi_arch_number = MACH_TYPE_HHP_CRADLE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Init SIOs to enable SCC2 */ - udelay (100000); /* delay makes it look neat */ - init_sio (0, CRADLE_SIO1_PHYS); - udelay (100000); - init_sio (1, CRADLE_SIO2_PHYS); - udelay (100000); - init_sio (2, CRADLE_SIO3_PHYS); - udelay (100000); - set_led (3, GREEN); - - return 1; -} - -extern void pxa_dram_init(void); -int dram_init(void) -{ - pxa_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/cradle/flash.c b/board/cradle/flash.c deleted file mode 100644 index 1601782..0000000 --- a/board/cradle/flash.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#define FLASH_BANK_SIZE 0x400000 -#define MAIN_SECT_SIZE 0x20000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F128J3 & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - switch (i) { - case 0: - flashbase = PHYS_FLASH_1; - break; - case 1: - flashbase = PHYS_FLASH_2; - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = - flashbase + j * MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i, j; - - for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) { - switch (info->flash_id & FLASH_VENDMASK) { - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf ("Intel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (INTEL_ID_28F320J3A & FLASH_TYPEMASK): - printf ("28F320J3A (32Mbit)\n"); - break; - case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): - printf ("28F128J3 (128Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - info++; - } - -Done: ; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - int rc = ERR_OK; - ulong start; - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (INTEL_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - vu_short *addr = (vu_short *) (info->start[sect]); - - *addr = 0x20; /* erase setup */ - *addr = 0xD0; /* erase confirm */ - - while ((*addr & 0x80) != 0x80) { - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = 0xB0; /* suspend erase */ - *addr = 0xFF; /* reset to read mode */ - rc = ERR_TIMOUT; - goto outahere; - } - } - - /* clear status register command */ - *addr = 0x50; - /* reset to read mode */ - *addr = 0xFF; - } - printf ("ok.\n"); - } - if (ctrlc ()) - printf ("User Interrupt!\n"); - -outahere: - - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (flag) - enable_interrupts (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ushort data) -{ - vu_short *addr = (vu_short *) dest, val; - int rc = ERR_OK; - int flag; - ulong start; - - /* Check if Flash is (sufficiently) erased - */ - if ((*addr & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - /* clear status register command */ - *addr = 0x50; - - /* program set-up command */ - *addr = 0x40; - - /* latch address/data */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((val = *addr) & 0x80) != 0x80) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = ERR_TIMOUT; - /* suspend program command */ - *addr = 0xB0; - goto outahere; - } - } - - if (val & 0x1A) { /* check for error */ - printf ("\nFlash write error %02x at address %08lx\n", - (int) val, (unsigned long) dest); - if (val & (1 << 3)) { - printf ("Voltage range error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - if (val & (1 << 1)) { - printf ("Device protect error.\n"); - rc = ERR_PROTECTED; - goto outahere; - } - if (val & (1 << 4)) { - printf ("Programming error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - rc = ERR_PROG_ERROR; - goto outahere; - } - -outahere: - /* read array command */ - *addr = 0xFF; - - if (flag) - enable_interrupts (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - ushort data; - int l; - int i, rc; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - for (; i < 2 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((vu_short *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - return write_word (info, wp, data); -} @@ -217,7 +217,6 @@ actux4 arm ixp dvlhost arm ixp balloon3 arm pxa colibri_pxa270 arm pxa -cradle arm pxa lubbock arm pxa palmld arm pxa palmtc arm pxa diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 732d92d..3e7f113 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net> cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com> mpq101 powerpc mpc85xx - 2011-10-23 Alex Dubov <oakad@yahoo.com> ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de> diff --git a/include/configs/cradle.h b/include/configs/cradle.h deleted file mode 100644 index 25be616..0000000 --- a/include/configs/cradle.h +++ /dev/null @@ -1,358 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_HHP_CRADLE 1 /* on an Cradle Board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_SYS_TEXT_BASE 0x0 -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x10000300 -#define CONFIG_SMC91111_EXT_PHY -#define CONFIG_SMC_USE_32_BIT - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,115200" -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.21 -#define CONFIG_SERVERIP 192.168.0.250 -#define CONFIG_BOOTCOMMAND "bootm 40000" -#define CONFIG_CMDLINE_TAG - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 64 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x00020000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x20000 /* 8K ouch, this may later be */ - -/****************************************************************************** - * - * CPU specific defines - * - ******************************************************************************/ - -/* - * GPIO settings - * - * GPIO pin assignments - * GPIO Name Dir Out AF - * 0 NC - * 1 NC - * 2 SIRQ1 I - * 3 SIRQ2 I - * 4 SIRQ3 I - * 5 DMAACK1 O 0 - * 6 DMAACK2 O 0 - * 7 DMAACK3 O 0 - * 8 TC1 O 0 - * 9 TC2 O 0 - * 10 TC3 O 0 - * 11 nDMAEN O 1 - * 12 AENCTRL O 0 - * 13 PLDTC O 0 - * 14 ETHIRQ I - * 15 NC - * 16 NC - * 17 NC - * 18 RDY I - * 19 DMASIO I - * 20 ETHIRQ NC - * 21 NC - * 22 PGMEN O 1 FIXME for debug only enable flash - * 23 NC - * 24 NC - * 25 NC - * 26 NC - * 27 NC - * 28 NC - * 29 NC - * 30 NC - * 31 NC - * 32 NC - * 33 NC - * 34 FFRXD I 01 - * 35 FFCTS I 01 - * 36 FFDCD I 01 - * 37 FFDSR I 01 - * 38 FFRI I 01 - * 39 FFTXD O 1 10 - * 40 FFDTR O 0 10 - * 41 FFRTS O 0 10 - * 42 RS232FOFF O 0 00 - * 43 NC - * 44 NC - * 45 IRSL0 O 0 - * 46 IRRX0 I 01 - * 47 IRTX0 O 0 10 - * 48 NC - * 49 nIOWE O 0 - * 50 NC - * 51 NC - * 52 NC - * 53 NC - * 54 NC - * 55 NC - * 56 NC - * 57 NC - * 58 DKDIRQ I - * 59 NC - * 60 NC - * 61 NC - * 62 NC - * 63 NC - * 64 COMLED O 0 - * 65 COMLED O 0 - * 66 COMLED O 0 - * 67 COMLED O 0 - * 68 COMLED O 0 - * 69 COMLED O 0 - * 70 COMLED O 0 - * 71 COMLED O 0 - * 72 NC - * 73 NC - * 74 NC - * 75 NC - * 76 NC - * 77 NC - * 78 CSIO O 1 - * 79 NC - * 80 CSETH O 1 - * - * NOTE: All NC's are defined to be outputs - * - */ -/* Pin direction control */ -/* NOTE GPIO 0, 61, 62 are set for inputs due to CPLD SPAREs */ -#define CONFIG_SYS_GPDR0_VAL 0xfff3bf02 -#define CONFIG_SYS_GPDR1_VAL 0xfbffbf83 -#define CONFIG_SYS_GPDR2_VAL 0x0001ffff -/* Set and Clear registers */ -#define CONFIG_SYS_GPSR0_VAL 0x00400800 -#define CONFIG_SYS_GPSR1_VAL 0x00000480 -#define CONFIG_SYS_GPSR2_VAL 0x00014000 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -/* Edge detect registers (these are set by the kernel) */ -#define CONFIG_SYS_GRER0_VAL 0x00000000 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 -#define CONFIG_SYS_GFER0_VAL 0x00000000 -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 -/* Alternate function registers */ -#define CONFIG_SYS_GAFR0_L_VAL 0x00000000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00000010 -#define CONFIG_SYS_GAFR1_L_VAL 0x900a9550 -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0x20000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -/* - * Clocks, power control and interrupts - */ -#define CONFIG_SYS_PSSR_VAL 0x00000020 -#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */ -#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ - -/* FIXME - * - * RTC settings - * Watchdog - * - */ - -/* - * Memory settings - * - * FIXME Can ethernet be burst read and/or write?? This is set for lubbock - * Verify timings on all - */ -#define CONFIG_SYS_MSC0_VAL 0x000023FA /* flash bank (cs0) */ -/*#define CONFIG_SYS_MSC1_VAL 0x00003549 / * SuperIO bank (cs2) */ -#define CONFIG_SYS_MSC1_VAL 0x0000354c /* SuperIO bank (cs2) */ -#define CONFIG_SYS_MSC2_VAL 0x00001224 /* Ethernet bank (cs4) */ -#ifdef REDBOOT_WAY -#define CONFIG_SYS_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */ -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_MDREFR_VAL 0x00018018 -#else -#define CONFIG_SYS_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */ -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */ -#endif -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - -/* Board specific defines */ - -/* LED defines */ -#define YELLOW 0x03 -#define RED 0x02 -#define GREEN 0x01 -#define OFF 0x00 -#define LED_IRDA0 0 -#define LED_IRDA1 2 -#define LED_IRDA2 4 -#define LED_IRDA3 6 - -/* SuperIO defines */ -#define CRADLE_SIO_INDEX 0x2e -#define CRADLE_SIO_DATA 0x2f - -/* IO defines */ -#define CRADLE_CPLD_PHYS 0x08000000 -#define CRADLE_SIO1_PHYS 0x08100000 -#define CRADLE_SIO2_PHYS 0x08200000 -#define CRADLE_SIO3_PHYS 0x08300000 -#define CRADLE_ETH_PHYS 0x10000000 - -#ifndef __ASSEMBLY__ - -/* global prototypes */ -void led_code(int code, int color); - -#endif - -#endif /* __CONFIG_H */ |