diff options
| -rw-r--r-- | arch/arm/mach-imx/mx6/Kconfig | 2 | ||||
| -rw-r--r-- | board/liebherr/display5/display5.c | 48 | ||||
| -rw-r--r-- | configs/display5_defconfig | 14 | ||||
| -rw-r--r-- | include/configs/display5.h | 8 |
4 files changed, 16 insertions, 56 deletions
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 01f0121..ba2ab51 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -197,6 +197,8 @@ config TARGET_DHCOMIMX6 config TARGET_DISPLAY5 bool "LWN DISPLAY5 board" select DM + select DM_I2C + select DM_GPIO select DM_SERIAL select SUPPORT_SPL imply CMD_DM diff --git a/board/liebherr/display5/display5.c b/board/liebherr/display5/display5.c index 037c4e6..5ebc852 100644 --- a/board/liebherr/display5/display5.c +++ b/board/liebherr/display5/display5.c @@ -18,7 +18,6 @@ #include <asm/gpio.h> #include <malloc.h> #include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/mxc_i2c.h> #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/spi.h> #include <mmc.h> @@ -119,49 +118,6 @@ int dram_init(void) return 0; } -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* I2C1: TFA9879 */ -struct i2c_pads_info i2c_pad_info0 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, - .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC, - .gp = IMX_GPIO_NR(3, 21) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC, - .gp = IMX_GPIO_NR(3, 28) - } -}; - -/* I2C2: TIVO TM4C123 */ -struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, - .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, - .gp = IMX_GPIO_NR(2, 30) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC, - .gp = IMX_GPIO_NR(3, 16) - } -}; - -/* I2C3: PMIC PF0100, EEPROM AT24C256C */ -struct i2c_pads_info i2c_pad_info2 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, - .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, - .gp = IMX_GPIO_NR(3, 17) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, - .gp = IMX_GPIO_NR(3, 18) - } -}; - iomux_v3_cfg_t const misc_pads[] = { /* Prod ID GPIO pins */ MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -369,10 +325,6 @@ int board_init(void) udelay(25); - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); - return 0; } diff --git a/configs/display5_defconfig b/configs/display5_defconfig index 6703251..8de5ec6 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -67,6 +67,19 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2 +CONFIG_SYS_I2C_MXC=y +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x50 +CONFIG_SYS_I2C_EEPROM_BUS=2 +CONFIG_SYS_EEPROM_SIZE=32768 +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_USDHC=y CONFIG_MTD_DEVICE=y @@ -85,4 +98,5 @@ CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_MXC_SPI=y +CONFIG_I2C_EDID=y CONFIG_IMX_WATCHDOG=y diff --git a/include/configs/display5.h b/include/configs/display5.h index e503e4a..59f6c64 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -57,15 +57,7 @@ #define CONFIG_MXC_UART_BASE UART5_BASE /* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 -#define CONFIG_SYS_I2C_MXC_I2C2 -#define CONFIG_SYS_I2C_MXC_I2C3 #define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_I2C_EDID -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Ethernet */ #ifdef CONFIG_FEC_MXC |