diff options
| -rw-r--r-- | CHANGELOG | 5 | ||||
| -rw-r--r-- | README | 19 | ||||
| -rw-r--r-- | net/tftp.c | 10 |
3 files changed, 34 insertions, 0 deletions
@@ -2,6 +2,11 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Allow to force TFTP to use a fixed UDP port + (Add a configuration option CONFIG_TFTP_PORT and optional env + variable tftpport) + Patch by Jerry Van Baren, 10 Jan 2005 + * Fix ethernet timeouts on dbau1550 and other au1x00 systems Patch by Leif Lindholm, 29 Dec 2004 @@ -1487,6 +1487,22 @@ The following options need to be configured: When SystemACE support is added, the "ace" device type becomes available to the fat commands, i.e. fatls. +- TFTP Fixed UDP Port: + CONFIG_TFTP_PORT + + If this is defined, the environment variable tftpport + is used to supply the TFTP UDP source port value. + If tftpport isn't defined, the normal pseudo-random port + number generator is used. + + The purpose for this is to allow a TFTP server to + blindly start the TFTP transfer using the pre-configured + target IP address and UDP port. This has the effect of + "punching through" the (Windows XP) firewall, allowing + the remainder of the TFTP transfer to proceed normally. + A better solution is to properly configure the firewall, + but sometimes that is not allowed. + - Show boot progress: CONFIG_SHOW_BOOT_PROGRESS @@ -2452,6 +2468,9 @@ Some configuration options can be set using Environment Variables: Useful on scripts which control the retry operation themselves. + tftpport - If this is set, the value is used for TFTP's + UDP source port. + vlan - When set to a value < 4095 the traffic over ethernet is encapsulated/received over 802.1q VLAN tagged frames. @@ -313,6 +313,10 @@ TftpTimeout (void) void TftpStart (void) { +#ifdef CONFIG_TFTP_PORT + char *ep; /* Environment pointer */ +#endif + if (BootFile[0] == '\0') { sprintf(default_filename, "%02lX%02lX%02lX%02lX.img", NetOurIP & 0xFF, @@ -364,7 +368,13 @@ TftpStart (void) TftpServerPort = WELL_KNOWN_PORT; TftpTimeoutCount = 0; TftpState = STATE_RRQ; + /* Use a pseudo-random port unless a specific port is set */ TftpOurPort = 1024 + (get_timer(0) % 3072); +#ifdef CONFIG_TFTP_PORT + if ((ep = getenv("tftpport")) != NULL) { + TftpOurPort= simple_strtol(ep, NULL, 10); + } +#endif TftpBlock = 0; /* zero out server ether in case the server ip has changed */ |