diff options
165 files changed, 719 insertions, 328 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5ab9cbe..05606d9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -936,6 +936,7 @@ config ARCH_SUNXI select SPL_STACK_R if SPL select SPL_SYS_MALLOC_SIMPLE if SPL select SPL_SYS_THUMB_BUILD if !ARM64 + select SUNXI_GPIO select SYS_NS16550 select SYS_THUMB_BUILD if !ARM64 select USB if DISTRO_DEFAULTS diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 39cf4c3..f553507 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -482,6 +482,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts new file mode 100644 index 0000000..25540b7 --- /dev/null +++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts @@ -0,0 +1,216 @@ +/* + * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Beelink X2"; + compatible = "roofull,beelink-x2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + ethernet0 = &emac; + ethernet1 = &sdiowifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "beelink-x2:blue:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + red { + label = "beelink-x2:red:standby"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; + + sound_spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + sdiowifi: sdio_wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on except for the OTG port */ + status = "okay"; + usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */ + usb0_vbus-supply = <®_usb0_vbus>; +}; diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h index eeb4da5..0a1da02 100644 --- a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h +++ b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h @@ -9,6 +9,8 @@ #ifndef _SUNXI_DRAM_SUN50I_H6_H #define _SUNXI_DRAM_SUN50I_H6_H +#include <stdbool.h> + enum sunxi_dram_type { SUNXI_DRAM_TYPE_DDR3 = 3, SUNXI_DRAM_TYPE_DDR4, @@ -16,6 +18,11 @@ enum sunxi_dram_type { SUNXI_DRAM_TYPE_LPDDR3, }; +static inline bool sunxi_dram_is_lpddr(int type) +{ + return type >= SUNXI_DRAM_TYPE_LPDDR2; +} + /* * The following information is mainly retrieved by disassembly and some FPGA * test code of sun50iw3 platform. @@ -286,6 +293,32 @@ check_member(sunxi_mctl_phy_reg, dx[3].reserved_0xf0, 0xaf0); #define DCR_DDR3 (3 << 0) #define DCR_DDR4 (4 << 0) #define DCR_DDR8BANK BIT(3) +#define DCR_DDR2T BIT(28) + +/* + * The delay parameters allow to allegedly specify delay times of some + * unknown unit for each individual bit trace in each of the four data bytes + * the 32-bit wide access consists of. Also three control signals can be + * adjusted individually. + */ +#define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE) +/* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable and DQSN */ +#define WR_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 4) +/* + * The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable, DQSN, + * Termination and Power down + */ +#define RD_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 6) +struct dram_para { + u32 clk; + enum sunxi_dram_type type; + u8 cols; + u8 rows; + u8 ranks; + const u8 dx_read_delays[NR_OF_BYTE_LANES][RD_LINES_PER_BYTE_LANE]; + const u8 dx_write_delays[NR_OF_BYTE_LANES][WR_LINES_PER_BYTE_LANE]; +}; + static inline int ns_to_t(int nanoseconds) { @@ -294,4 +327,6 @@ static inline int ns_to_t(int nanoseconds) return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000); } +void mctl_set_timing_params(struct dram_para *para); + #endif /* _SUNXI_DRAM_SUN50I_H6_H */ diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 1669e62..ffdf09f 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -300,6 +300,7 @@ config MACH_SUN50I_H6 select ARM64 select SUPPORT_SPL select FIT + select PHY_SUN4I_USB select SPL_LOAD_FIT select DRAM_SUN50I_H6 @@ -340,7 +341,7 @@ config ARM_BOOT_HOOK_RMR This allows both the SPL and the U-Boot proper to be entered in either mode and switch to AArch64 if needed. -if SUNXI_DRAM_DW +if SUNXI_DRAM_DW || DRAM_SUN50I_H6 config SUNXI_DRAM_DDR3 bool @@ -370,6 +371,22 @@ config SUNXI_DRAM_LPDDR3_STOCK This option is the LPDDR3 timing used by the stock boot0 by Allwinner. +config SUNXI_DRAM_H6_LPDDR3 + bool "LPDDR3 DRAM chips on the H6 DRAM controller" + select SUNXI_DRAM_LPDDR3 + depends on DRAM_SUN50I_H6 + ---help--- + This option is the LPDDR3 timing used by the stock boot0 by + Allwinner. + +config SUNXI_DRAM_H6_DDR3_1333 + bool "DDR3-1333 boot0 timings on the H6 DRAM controller" + select SUNXI_DRAM_DDR3 + depends on DRAM_SUN50I_H6 + ---help--- + This option is the DDR3 timing used by the boot0 on H6 TV boxes + which use a DDR3-1333 timing. + config SUNXI_DRAM_DDR2_V3S bool "DDR2 found in V3s chip" select SUNXI_DRAM_DDR2 diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 43a93e3..d129f33 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -39,4 +39,5 @@ obj-$(CONFIG_SPL_SPI_SUNXI) += spl_spi_sunxi.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/ obj-$(CONFIG_DRAM_SUN50I_H6) += dram_sun50i_h6.o +obj-$(CONFIG_DRAM_SUN50I_H6) += dram_timings/ endif diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c index 5da90a2..2a8275d 100644 --- a/arch/arm/mach-sunxi/dram_sun50i_h6.c +++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c @@ -32,33 +32,8 @@ * similar PHY is ZynqMP. */ -/* - * The delay parameters below allow to allegedly specify delay times of some - * unknown unit for each individual bit trace in each of the four data bytes - * the 32-bit wide access consists of. Also three control signals can be - * adjusted individually. - */ -#define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE) -/* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable and DQSN */ -#define WR_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 4) -/* - * The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable, DQSN, - * Termination and Power down - */ -#define RD_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 6) -struct dram_para { - u32 clk; - enum sunxi_dram_type type; - u8 cols; - u8 rows; - u8 ranks; - const u8 dx_read_delays[NR_OF_BYTE_LANES][RD_LINES_PER_BYTE_LANE]; - const u8 dx_write_delays[NR_OF_BYTE_LANES][WR_LINES_PER_BYTE_LANE]; -}; - static void mctl_sys_init(struct dram_para *para); static void mctl_com_init(struct dram_para *para); -static void mctl_set_timing_lpddr3(struct dram_para *para); static void mctl_channel_init(struct dram_para *para); static void mctl_core_init(struct dram_para *para) @@ -67,7 +42,8 @@ static void mctl_core_init(struct dram_para *para) mctl_com_init(para); switch (para->type) { case SUNXI_DRAM_TYPE_LPDDR3: - mctl_set_timing_lpddr3(para); + case SUNXI_DRAM_TYPE_DDR3: + mctl_set_timing_params(para); break; default: panic("Unsupported DRAM type!"); @@ -75,12 +51,14 @@ static void mctl_core_init(struct dram_para *para) mctl_channel_init(para); } +/* PHY initialisation */ static void mctl_phy_pir_init(u32 val) { struct sunxi_mctl_phy_reg * const mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; - writel(val | BIT(0), &mctl_phy->pir); + writel(val, &mctl_phy->pir); + writel(val | BIT(0), &mctl_phy->pir); /* Start initialisation. */ mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0)); } @@ -169,125 +147,6 @@ static void mctl_set_master_priority(void) MBUS_CONF(HDCP2, true, HIGH, 2, 100, 64, 32); } -static u32 mr_lpddr3[12] = { - 0x00000000, 0x00000043, 0x0000001a, 0x00000001, - 0x00000000, 0x00000000, 0x00000048, 0x00000000, - 0x00000000, 0x00000000, 0x00000000, 0x00000003, -}; - -/* TODO: flexible timing */ -static void mctl_set_timing_lpddr3(struct dram_para *para) -{ - struct sunxi_mctl_ctl_reg * const mctl_ctl = - (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; - struct sunxi_mctl_phy_reg * const mctl_phy = - (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; - - u8 tccd = 2; - u8 tfaw = max(ns_to_t(50), 4); - u8 trrd = max(ns_to_t(10), 2); - u8 trcd = max(ns_to_t(24), 2); - u8 trc = ns_to_t(70); - u8 txp = max(ns_to_t(8), 2); - u8 twtr = max(ns_to_t(8), 2); - u8 trtp = max(ns_to_t(8), 2); - u8 twr = max(ns_to_t(15), 2); - u8 trp = ns_to_t(18); - u8 tras = ns_to_t(42); - u8 twtr_sa = ns_to_t(5); - u8 tcksrea = ns_to_t(11); - u16 trefi = ns_to_t(3900) / 32; - u16 trfc = ns_to_t(210); - u16 txsr = ns_to_t(220); - - if (CONFIG_DRAM_CLK % 400 == 0) { - /* Round up these parameters */ - twtr_sa++; - tcksrea++; - } - - u8 tmrw = 5; - u8 tmrd = 5; - u8 tmod = 12; - u8 tcke = 3; - u8 tcksrx = 5; - u8 tcksre = 5; - u8 tckesr = 5; - u8 trasmax = CONFIG_DRAM_CLK / 60; - u8 txs = 4; - u8 txsdll = 4; - u8 txsabort = 4; - u8 txsfast = 4; - - u8 tcl = 5; /* CL 10 */ - u8 tcwl = 3; /* CWL 6 */ - u8 t_rdata_en = twtr_sa + 8; - - u32 tdinit0 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */ - u32 tdinit1 = (100 * CONFIG_DRAM_CLK) / 1000 + 1; /* 100ns */ - u32 tdinit2 = (11 * CONFIG_DRAM_CLK) + 1; /* 11us */ - u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */ - - u8 twtp = tcwl + 4 + twr + 1; - /* - * The code below for twr2rd and trd2wr follows the IP core's - * document from ZynqMP and i.MX7. The BSP has both number - * substracted by 2. - */ - u8 twr2rd = tcwl + 4 + 1 + twtr; - u8 trd2wr = tcl + 4 + (tcksrea >> 1) - tcwl + 1; - - /* set mode register */ - memcpy(mctl_phy->mr, mr_lpddr3, sizeof(mr_lpddr3)); - - /* set DRAM timing */ - writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras, - &mctl_ctl->dramtmg[0]); - writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]); - writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd, - &mctl_ctl->dramtmg[2]); - writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]); - writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp, - &mctl_ctl->dramtmg[4]); - writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke, - &mctl_ctl->dramtmg[5]); - /* Value suggested by ZynqMP manual and used by libdram */ - writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]); - writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs, - &mctl_ctl->dramtmg[8]); - writel(txsr, &mctl_ctl->dramtmg[14]); - - clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30)); - writel(0, &mctl_ctl->dfimisc); - clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660); - - /* - * Set timing registers of the PHY. - * Note: the PHY is clocked 2x from the DRAM frequency. - */ - writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1), - &mctl_phy->dtpr[0]); - writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]); - writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]); - writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8), - &mctl_phy->dtpr[3]); - writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]); - writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]); - writel(0x0505, &mctl_phy->dtpr[6]); - - /* Configure DFI timing */ - writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000, - &mctl_ctl->dfitmg0); - writel(0x040201, &mctl_ctl->dfitmg1); - - /* Configure PHY timing */ - writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]); - writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]); - - /* set refresh timing */ - writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg); -} - static void mctl_sys_init(struct dram_para *para) { struct sunxi_ccm_reg * const ccm = @@ -426,14 +285,11 @@ static void mctl_com_init(struct dram_para *para) mctl_set_addrmap(para); setbits_le32(&mctl_com->cr, BIT(31)); - /* - * This address is magic; it's in SID memory area, but there's no - * known definition of it. - * On my Pine H64 board it has content 7. - */ - if (readl(0x03006100) == 7) + + /* The bonding ID seems to be always 7. */ + if (readl(SUNXI_SIDC_BASE + 0x100) == 7) /* bonding ID */ clrbits_le32(&mctl_com->cr, BIT(27)); - else if (readl(0x03006100) == 3) + else if (readl(SUNXI_SIDC_BASE + 0x100) == 3) setbits_le32(&mctl_com->cr, BIT(27)); if (para->clk > 408) @@ -444,22 +300,37 @@ static void mctl_com_init(struct dram_para *para) reg_val = 0x3f00; clrsetbits_le32(&mctl_com->unk_0x008, 0x3f00, reg_val); - /* TODO: half DQ, non-LPDDR3 types */ - writel(MSTR_DEVICETYPE_LPDDR3 | MSTR_BUSWIDTH_FULL | - MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks) | - 0x80000000, &mctl_ctl->mstr); - writel(DCR_LPDDR3 | DCR_DDR8BANK | 0x400, &mctl_phy->dcr); + /* TODO: half DQ, DDR4 */ + reg_val = MSTR_BUSWIDTH_FULL | MSTR_BURST_LENGTH(8) | + MSTR_ACTIVE_RANKS(para->ranks); + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) + reg_val |= MSTR_DEVICETYPE_LPDDR3; + if (para->type == SUNXI_DRAM_TYPE_DDR3) + reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE; + writel(reg_val | BIT(31), &mctl_ctl->mstr); + + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) + reg_val = DCR_LPDDR3 | DCR_DDR8BANK; + if (para->type == SUNXI_DRAM_TYPE_DDR3) + reg_val = DCR_DDR3 | DCR_DDR8BANK | DCR_DDR2T; + writel(reg_val | 0x400, &mctl_phy->dcr); if (para->ranks == 2) writel(0x0303, &mctl_ctl->odtmap); else writel(0x0201, &mctl_ctl->odtmap); - /* TODO: non-LPDDR3 types */ - tmp = para->clk * 7 / 2000; - reg_val = 0x0400; - reg_val |= (tmp + 7) << 24; - reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16; + /* TODO: DDR4 */ + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { + tmp = para->clk * 7 / 2000; + reg_val = 0x0400; + reg_val |= (tmp + 7) << 24; + reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16; + } else if (para->type == SUNXI_DRAM_TYPE_DDR3) { + reg_val = 0x06000400; /* TODO?: Use CL - CWL value in [7:0] */ + } else { + panic("Only (LP)DDR3 supported (type = %d)\n", para->type); + } writel(reg_val, &mctl_ctl->odtcfg); /* TODO: half DQ */ @@ -514,6 +385,9 @@ static void mctl_bit_delay_set(struct dram_para *para) setbits_le32(&mctl_phy->pgcr[0], BIT(26)); udelay(1); + if (para->type != SUNXI_DRAM_TYPE_LPDDR3) + return; + for (i = 1; i < 14; i++) { val = readl(&mctl_phy->acbdlr[i]); val += 0x0a0a0a0a; @@ -561,7 +435,8 @@ static void mctl_channel_init(struct dram_para *para) else clrsetbits_le32(&mctl_phy->dtcr[1], 0x30000, 0x10000); - clrbits_le32(&mctl_phy->dtcr[1], BIT(1)); + if (sunxi_dram_is_lpddr(para->type)) + clrbits_le32(&mctl_phy->dtcr[1], BIT(1)); if (para->ranks == 2) { writel(0x00010001, &mctl_phy->rankidr); writel(0x20000, &mctl_phy->odtcr); @@ -570,8 +445,11 @@ static void mctl_channel_init(struct dram_para *para) writel(0x10000, &mctl_phy->odtcr); } - /* TODO: non-LPDDR3 types */ - clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040); + /* set bits [3:0] to 1? 0 not valid in ZynqMP d/s */ + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) + clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040); + else + clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000000); if (para->clk <= 792) { if (para->clk <= 672) { if (para->clk <= 600) @@ -601,12 +479,13 @@ static void mctl_channel_init(struct dram_para *para) writel(0x06060606, &mctl_phy->acbdlr[i]); } - /* TODO: non-LPDDR3 types */ - mctl_phy_pir_init(PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT | - PIR_QSGATE | PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE | - PIR_WREYE); + val = PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT | PIR_QSGATE | + PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE | PIR_WREYE; + if (para->type == SUNXI_DRAM_TYPE_DDR3) + val |= PIR_DRAMRST | PIR_WL; + mctl_phy_pir_init(val); - /* TODO: non-LPDDR3 types */ + /* TODO: DDR4 types ? */ for (i = 0; i < 4; i++) writel(0x00000909, &mctl_phy->dx[i].gcr[5]); @@ -662,7 +541,8 @@ static void mctl_channel_init(struct dram_para *para) panic("Error while initializing DRAM PHY!\n"); } - clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40); + if (sunxi_dram_is_lpddr(para->type)) + clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40); clrbits_le32(&mctl_phy->pgcr[1], 0x40); clrbits_le32(&mctl_ctl->dfimisc, BIT(0)); writel(1, &mctl_ctl->swctl); @@ -714,29 +594,46 @@ unsigned long mctl_calc_size(struct dram_para *para) return (1ULL << (para->cols + para->rows + 3)) * 4 * para->ranks; } -#define SUN50I_H6_DX_WRITE_DELAYS \ +#define SUN50I_H6_LPDDR3_DX_WRITE_DELAYS \ {{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 4, 0 }, \ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }} -#define SUN50I_H6_DX_READ_DELAYS \ +#define SUN50I_H6_LPDDR3_DX_READ_DELAYS \ {{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }} +#define SUN50I_H6_DDR3_DX_WRITE_DELAYS \ + {{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }} +#define SUN50I_H6_DDR3_DX_READ_DELAYS \ + {{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }} + unsigned long sunxi_dram_init(void) { struct sunxi_mctl_com_reg * const mctl_com = (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; struct dram_para para = { .clk = CONFIG_DRAM_CLK, - .type = SUNXI_DRAM_TYPE_LPDDR3, .ranks = 2, .cols = 11, .rows = 14, - .dx_read_delays = SUN50I_H6_DX_READ_DELAYS, - .dx_write_delays = SUN50I_H6_DX_WRITE_DELAYS, +#ifdef CONFIG_SUNXI_DRAM_H6_LPDDR3 + .type = SUNXI_DRAM_TYPE_LPDDR3, + .dx_read_delays = SUN50I_H6_LPDDR3_DX_READ_DELAYS, + .dx_write_delays = SUN50I_H6_LPDDR3_DX_WRITE_DELAYS, +#elif defined(CONFIG_SUNXI_DRAM_H6_DDR3_1333) + .type = SUNXI_DRAM_TYPE_DDR3, + .dx_read_delays = SUN50I_H6_DDR3_DX_READ_DELAYS, + .dx_write_delays = SUN50I_H6_DDR3_DX_WRITE_DELAYS, +#endif }; unsigned long size; diff --git a/arch/arm/mach-sunxi/dram_timings/Makefile b/arch/arm/mach-sunxi/dram_timings/Makefile index 278a8a1..0deb991 100644 --- a/arch/arm/mach-sunxi/dram_timings/Makefile +++ b/arch/arm/mach-sunxi/dram_timings/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_SUNXI_DRAM_DDR3_1333) += ddr3_1333.o obj-$(CONFIG_SUNXI_DRAM_LPDDR3_STOCK) += lpddr3_stock.o obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S) += ddr2_v3s.o +obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o +obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o diff --git a/arch/arm/mach-sunxi/dram_timings/h6_ddr3_1333.c b/arch/arm/mach-sunxi/dram_timings/h6_ddr3_1333.c new file mode 100644 index 0000000..611eaa3 --- /dev/null +++ b/arch/arm/mach-sunxi/dram_timings/h6_ddr3_1333.c @@ -0,0 +1,144 @@ +/* + * sun50i H6 DDR3-1333 timings, as programmed by Allwinner's boot0 + * for some TV boxes with the H6 and DDR3 memory. + * + * The chips are probably able to be driven by a faster clock, but boot0 + * uses a more conservative timing (as usual). + * + * (C) Copyright 2018,2019 Arm Ltd. + * based on previous work by: + * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io> + * + * References used: + * - JEDEC DDR3 SDRAM standard: JESD79-3F.pdf + * - Samsung K4B2G0446D datasheet + * - ZynqMP UG1087 register DDRC/PHY documentation + * + * Many thanks to Jernej Skrabec for contributing some fixes! + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/dram.h> +#include <asm/arch/cpu.h> + +/* + * Only the first four are used for DDR3(?) + * MR0: BL8, seq. read burst, no test, fast exit (DLL on), no DLL reset, + * CAS latency (CL): 11, write recovery (WR): 12 + * MR1: DLL enabled, output strength RZQ/6, Rtt_norm RZQ/2, + * write levelling disabled, TDQS disabled, output buffer enabled + * MR2: manual full array self refresh, dynamic ODT off, + * CAS write latency (CWL): 8 + */ +static u32 mr_ddr3[7] = { + 0x00001c70, 0x00000040, 0x00000018, 0x00000000, + 0x00000000, 0x00000400, 0x00000848, +}; + +/* TODO: flexible timing */ +void mctl_set_timing_params(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + struct sunxi_mctl_phy_reg * const mctl_phy = + (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; + int i; + + u8 tccd = 2; /* JEDEC: 4nCK */ + u8 tfaw = ns_to_t(50); /* JEDEC: 30 ns w/ 1K pages */ + u8 trrd = max(ns_to_t(6), 4); /* JEDEC: max(6 ns, 4nCK) */ + u8 trcd = ns_to_t(15); /* JEDEC: 13.5 ns */ + u8 trc = ns_to_t(53); /* JEDEC: 49.5 ns */ + u8 txp = max(ns_to_t(6), 3); /* JEDEC: max(6 ns, 3nCK) */ + u8 twtr = max(ns_to_t(8), 2); /* JEDEC: max(7.5 ns, 4nCK) */ + u8 trtp = max(ns_to_t(8), 2); /* JEDEC: max(7.5 ns, 4nCK) */ + u8 twr = ns_to_t(15); /* JEDEC: 15 ns */ + u8 trp = ns_to_t(15); /* JEDEC: >= 13.75 ns */ + u8 tras = ns_to_t(38); /* JEDEC >= 36 ns, <= 9*trefi */ + u8 twtr_sa = 2; /* ? */ + u8 tcksrea = 4; /* ? */ + u16 trefi = ns_to_t(7800) / 32; /* JEDEC: 7.8us@Tcase <= 85C */ + u16 trfc = ns_to_t(350); /* JEDEC: 160 ns for 2Gb */ + u16 txsr = 4; /* ? */ + + u8 tmrw = 0; /* ? */ + u8 tmrd = 4; /* JEDEC: 4nCK */ + u8 tmod = max(ns_to_t(15), 12); /* JEDEC: max(15 ns, 12nCK) */ + u8 tcke = max(ns_to_t(6), 3); /* JEDEC: max(5.625 ns, 3nCK) */ + u8 tcksrx = max(ns_to_t(10), 5); /* JEDEC: max(10 ns, 5nCK) */ + u8 tcksre = max(ns_to_t(10), 5); /* JEDEC: max(10 ns, 5nCK) */ + u8 tckesr = tcke + 1; /* JEDEC: tCKE(min) + 1nCK */ + u8 trasmax = 24; /* JEDEC: tREFI * 9 */ + u8 txs = ns_to_t(360) / 32; /* JEDEC: max(5nCK,tRFC+10ns) */ + u8 txsdll = 4; /* JEDEC: 512 nCK */ + u8 txsabort = 4; /* ? */ + u8 txsfast = 4; /* ? */ + u8 tcl = 6; /* JEDEC: CL / 2 => 6 */ + u8 tcwl = 4; /* JEDEC: 8 */ + u8 t_rdata_en = 7; /* ? */ + + u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */ + u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; + u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; + u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */ + + u8 twtp = tcwl + 2 + twr; /* (WL + BL / 2 + tWR) / 2 */ + u8 twr2rd = tcwl + 2 + twtr; /* (WL + BL / 2 + tWTR) / 2 */ + u8 trd2wr = 5; /* (RL + BL / 2 + 2 - WL) / 2 */ + + if (tcl + 1 >= trtp + trp) + trtp = tcl + 2 - trp; + + /* set mode registers */ + for (i = 0; i < ARRAY_SIZE(mr_ddr3); i++) + writel(mr_ddr3[i], &mctl_phy->mr[i]); + + /* set DRAM timing */ + writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras, + &mctl_ctl->dramtmg[0]); + writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]); + writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd, + &mctl_ctl->dramtmg[2]); + writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]); + writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp, + &mctl_ctl->dramtmg[4]); + writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke, + &mctl_ctl->dramtmg[5]); + /* Value suggested by ZynqMP manual and used by libdram */ + writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]); + writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs, + &mctl_ctl->dramtmg[8]); + writel(txsr, &mctl_ctl->dramtmg[14]); + + clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30)); + writel(0, &mctl_ctl->dfimisc); + clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660); + + /* + * Set timing registers of the PHY. + * Note: the PHY is clocked 2x from the DRAM frequency. + */ + writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1), + &mctl_phy->dtpr[0]); + writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]); + writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]); + writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8), + &mctl_phy->dtpr[3]); + writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]); + writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]); + writel(0x0505, &mctl_phy->dtpr[6]); + + /* Configure DFI timing */ + writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000, + &mctl_ctl->dfitmg0); + writel(0x040201, &mctl_ctl->dfitmg1); + + /* Configure PHY timing. Zynq uses different registers. */ + writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]); + writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]); + + /* set refresh timing */ + writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg); +} diff --git a/arch/arm/mach-sunxi/dram_timings/h6_lpddr3.c b/arch/arm/mach-sunxi/dram_timings/h6_lpddr3.c new file mode 100644 index 0000000..1000860 --- /dev/null +++ b/arch/arm/mach-sunxi/dram_timings/h6_lpddr3.c @@ -0,0 +1,132 @@ +/* + * sun50i H6 LPDDR3 timings + * + * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/dram.h> +#include <asm/arch/cpu.h> + +static u32 mr_lpddr3[12] = { + 0x00000000, 0x00000043, 0x0000001a, 0x00000001, + 0x00000000, 0x00000000, 0x00000048, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000003, +}; + +/* TODO: flexible timing */ +void mctl_set_timing_params(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + struct sunxi_mctl_phy_reg * const mctl_phy = + (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; + int i; + + u8 tccd = 2; + u8 tfaw = max(ns_to_t(50), 4); + u8 trrd = max(ns_to_t(10), 2); + u8 trcd = max(ns_to_t(24), 2); + u8 trc = ns_to_t(70); + u8 txp = max(ns_to_t(8), 2); + u8 twtr = max(ns_to_t(8), 2); + u8 trtp = max(ns_to_t(8), 2); + u8 twr = max(ns_to_t(15), 2); + u8 trp = ns_to_t(18); + u8 tras = ns_to_t(42); + u8 twtr_sa = ns_to_t(5); + u8 tcksrea = ns_to_t(11); + u16 trefi = ns_to_t(3900) / 32; + u16 trfc = ns_to_t(210); + u16 txsr = ns_to_t(220); + + if (CONFIG_DRAM_CLK % 400 == 0) { + /* Round up these parameters */ + twtr_sa++; + tcksrea++; + } + + u8 tmrw = 5; + u8 tmrd = 5; + u8 tmod = 12; + u8 tcke = 3; + u8 tcksrx = 5; + u8 tcksre = 5; + u8 tckesr = 5; + u8 trasmax = CONFIG_DRAM_CLK / 60; + u8 txs = 4; + u8 txsdll = 4; + u8 txsabort = 4; + u8 txsfast = 4; + + u8 tcl = 5; /* CL 10 */ + u8 tcwl = 3; /* CWL 6 */ + u8 t_rdata_en = twtr_sa + 8; + + u32 tdinit0 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */ + u32 tdinit1 = (100 * CONFIG_DRAM_CLK) / 1000 + 1; /* 100ns */ + u32 tdinit2 = (11 * CONFIG_DRAM_CLK) + 1; /* 11us */ + u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */ + + u8 twtp = tcwl + 4 + twr + 1; + /* + * The code below for twr2rd and trd2wr follows the IP core's + * document from ZynqMP and i.MX7. The BSP has both number + * substracted by 2. + */ + u8 twr2rd = tcwl + 4 + 1 + twtr; + u8 trd2wr = tcl + 4 + (tcksrea >> 1) - tcwl + 1; + + /* set mode registers */ + for (i = 0; i < ARRAY_SIZE(mr_lpddr3); i++) + writel(mr_lpddr3[i], &mctl_phy->mr[i]); + + /* set DRAM timing */ + writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras, + &mctl_ctl->dramtmg[0]); + writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]); + writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd, + &mctl_ctl->dramtmg[2]); + writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]); + writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp, + &mctl_ctl->dramtmg[4]); + writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke, + &mctl_ctl->dramtmg[5]); + /* Value suggested by ZynqMP manual and used by libdram */ + writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]); + writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs, + &mctl_ctl->dramtmg[8]); + writel(txsr, &mctl_ctl->dramtmg[14]); + + clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30)); + writel(0, &mctl_ctl->dfimisc); + clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660); + + /* + * Set timing registers of the PHY. + * Note: the PHY is clocked 2x from the DRAM frequency. + */ + writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1), + &mctl_phy->dtpr[0]); + writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]); + writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]); + writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8), + &mctl_phy->dtpr[3]); + writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]); + writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]); + writel(0x0505, &mctl_phy->dtpr[6]); + + /* Configure DFI timing */ + writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000, + &mctl_ctl->dfitmg0); + writel(0x040201, &mctl_ctl->dfitmg1); + + /* Configure PHY timing */ + writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]); + writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]); + + /* set refresh timing */ + writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg); +} diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index bdd1854..c7e9d3e 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -172,6 +172,12 @@ S: Maintained F: configs/beelink_gs1_defconfig F: arch/arm/dts/sun50i-h6-beelink-gs1.dts +BEELINK X2 BOARD +M: Marcus Cooper <codekipper@gmail.com> +S: Maintained +F: configs/beelink_x2_defconfig +F: arch/arm/dts/sun8i-h3-beelink-x2.dts + COLOMBUS BOARD M: Maxime Ripard <maxime.ripard@bootlin.com> S: Maintained diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 126931b..7122c06 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -116,6 +116,9 @@ config SPL_LDSCRIPT config SPL_TEXT_BASE hex "SPL Text Base" default ISW_ENTRY_ADDR if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE + default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I + default 0x20060 if MACH_SUN50I_H6 + default 0x00060 if ARCH_SUNXI default 0x0 help The address in memory that SPL will be running from. diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 61b38b6..a986bf8 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -11,7 +11,6 @@ CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index 7cc8b83..26c927f 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -9,7 +9,6 @@ CONFIG_MMC1_CD_PIN="PG13" CONFIG_MMC_SUNXI_SLOT_EXTRA=1 CONFIG_USB1_VBUS_PIN="PB10" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 1f8023e..1d48214 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y CONFIG_VIDEO_LCD_POWER="PB10" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 0010d09..63c8a2a 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -15,7 +15,6 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index ed270f0..b00fcf3 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -13,7 +13,6 @@ CONFIG_SATAPWR="PC3" CONFIG_SPL_SPI_SUNXI=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index ec702ce..db1c25c 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -11,7 +11,6 @@ CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 87badd6..e1e72ed 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -9,7 +9,6 @@ CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig index 39d3d7f..62d878f 100644 --- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig +++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig @@ -11,7 +11,6 @@ CONFIG_VIDEO_VGA=y CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 3967303..29efaf6 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -12,7 +12,6 @@ CONFIG_VIDEO_VGA=y CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index bad6911..59dfdcc 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -13,7 +13,6 @@ CONFIG_USB0_VBUS_DET="PH5" CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig index f343bb6..c41e435 100644 --- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig +++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig @@ -13,7 +13,6 @@ CONFIG_SATAPWR="PC3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig index 8f9d350..38cc65b 100644 --- a/configs/A20-Olimex-SOM204-EVB_defconfig +++ b/configs/A20-Olimex-SOM204-EVB_defconfig @@ -12,7 +12,6 @@ CONFIG_SATAPWR="PC3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig index 893a5f2..4389856 100644 --- a/configs/A33-OLinuXino_defconfig +++ b/configs/A33-OLinuXino_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_BL_EN="PB2" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index f2db707..c44050f 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index f1c3b2e..0a27747 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig index 5d55ccf..c0fb547 100644 --- a/configs/Auxtek-T003_defconfig +++ b/configs/Auxtek-T003_defconfig @@ -8,7 +8,6 @@ CONFIG_DRAM_EMR1=0 CONFIG_USB1_VBUS_PIN="PB10" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index be2a94a..ae320b7 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="PG13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index 278e54f..384820d 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -9,7 +9,6 @@ CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra" diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 5be660a..86cc3a2 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -9,7 +9,6 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig index 7daaaa0..87e2d34 100644 --- a/configs/Bananapi_m2m_defconfig +++ b/configs/Bananapi_m2m_defconfig @@ -10,7 +10,6 @@ CONFIG_MMC0_CD_PIN="PB4" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_ID_DET="PH8" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_PARTITION_UUIDS is not set diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 5de48ae..8636eab 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -11,7 +11,6 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig index f94de1f..95c564c 100644 --- a/configs/CHIP_defconfig +++ b/configs/CHIP_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN5I=y CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y CONFIG_USB0_VBUS_PIN="PB10" CONFIG_VIDEO_COMPOSITE=y -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig index 5fd7998..6cd500f 100644 --- a/configs/CHIP_pro_defconfig +++ b/configs/CHIP_pro_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y CONFIG_USB0_VBUS_PIN="PB10" -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTDPARTS=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index d5e9ae5..d1ba5c8 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index efe45c1..acd931c 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 64c7f81..5e52388 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -17,7 +17,6 @@ CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23" CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24" CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index c9bc1a8..d1ff8fd 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig index 2abbd33..0134820 100644 --- a/configs/Cubieboard4_defconfig +++ b/configs/Cubieboard4_defconfig @@ -12,7 +12,6 @@ CONFIG_USB0_ID_DET="PH16" CONFIG_USB1_VBUS_PIN="PH14" CONFIG_USB3_VBUS_PIN="PH15" CONFIG_AXP_GPIO=y -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 36b1a89..1ff7270 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 6088549..ed8fbe9 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -13,7 +13,6 @@ CONFIG_SATAPWR="PH12" CONFIG_GMAC_TX_DELAY=1 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig index ef6a9d5..0573c1f 100644 --- a/configs/Cubietruck_plus_defconfig +++ b/configs/Cubietruck_plus_defconfig @@ -16,7 +16,6 @@ CONFIG_I2C0_ENABLE=y CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig index 07f32e2..f5dd96d 100644 --- a/configs/Empire_electronix_d709_defconfig +++ b/configs/Empire_electronix_d709_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Empire_electronix_m712_defconfig b/configs/Empire_electronix_m712_defconfig index 82a4a06..b8c3c56 100644 --- a/configs/Empire_electronix_m712_defconfig +++ b/configs/Empire_electronix_m712_defconfig @@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 6d8a9a3..f7a7b73 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -9,7 +9,6 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_VIDEO_VGA_VIA_LCD=y CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 89ae241..2b1b1cc 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index a5c7d62..f44fc9e 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index da8a835..0ce8c11 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -10,7 +10,6 @@ CONFIG_SATAPWR="PB3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig index e71f06b..760cb1b 100644 --- a/configs/LicheePi_Zero_defconfig +++ b/configs/LicheePi_Zero_defconfig @@ -4,7 +4,6 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN8I_V3S=y CONFIG_DRAM_CLK=360 -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index 5fce2b1..3277461 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -10,7 +10,6 @@ CONFIG_SATAPWR="PH2" CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 1208237..ce07a8c 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -8,7 +8,6 @@ CONFIG_DRAM_ZQ=122 CONFIG_SATAPWR="PH2" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index 7b73413..9685757 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index 23da4da..2da7a85 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index e48e1a1..746e568 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -10,7 +10,6 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 1396784..5eaf24a 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index b0d0c35..2666f1b 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index d321e94..4d900c1 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -8,7 +8,6 @@ CONFIG_INITIAL_USB_SCAN_DELAY=2000 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 672f4fe..fe6c0fa 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -8,7 +8,6 @@ CONFIG_VIDEO_VGA=y CONFIG_VIDEO_COMPOSITE=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index e1e628d..10c151f 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_ZQ=120 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index c400f13..b3b38a5 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -9,7 +9,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_VIDEO_VGA=y CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index f565dbc..57b25ba 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -9,7 +9,6 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_VIDEO_COMPOSITE=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index 7202bfd..70facee 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_ZQ=120 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index cc09533..288b5e6 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -12,7 +12,6 @@ CONFIG_USB0_ID_DET="PH3" CONFIG_USB1_VBUS_PIN="PH4" CONFIG_USB3_VBUS_PIN="PH5" CONFIG_AXP_GPIO=y -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 03fa81e..6000e39 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y CONFIG_USB0_VBUS_PIN="PB9" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Nintendo_NES_Classic_Edition_defconfig b/configs/Nintendo_NES_Classic_Edition_defconfig index 099a2bd..d0a7889 100644 --- a/configs/Nintendo_NES_Classic_Edition_defconfig +++ b/configs/Nintendo_NES_Classic_Edition_defconfig @@ -9,7 +9,6 @@ CONFIG_DRAM_ODT_EN=y CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTDPARTS=y # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index b1a7cbd..2a7bfff 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -12,7 +12,6 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 35f1b34..9f41fab 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -14,7 +14,6 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig index 31aa768..0714430 100644 --- a/configs/Sinlinx_SinA31s_defconfig +++ b/configs/Sinlinx_SinA31s_defconfig @@ -11,7 +11,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index 586be35..978e856 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig index d1ee98b..46ef97d 100644 --- a/configs/Sinovoip_BPI_M2_defconfig +++ b/configs/Sinovoip_BPI_M2_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig index 5174e28..914fc9d 100644 --- a/configs/Sinovoip_BPI_M3_defconfig +++ b/configs/Sinovoip_BPI_M3_defconfig @@ -17,7 +17,6 @@ CONFIG_AXP_GPIO=y CONFIG_SATAPWR="PD25" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/Sunchip_CX-A99_defconfig b/configs/Sunchip_CX-A99_defconfig index 8a9a072..c884d8f 100644 --- a/configs/Sunchip_CX-A99_defconfig +++ b/configs/Sunchip_CX-A99_defconfig @@ -12,7 +12,6 @@ CONFIG_USB0_VBUS_PIN="PH15" CONFIG_USB1_VBUS_PIN="PL7" CONFIG_USB3_VBUS_PIN="PL8" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index 78cd62c..5be41f1 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -20,7 +20,6 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_TL059WV5C0=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index f75606e..b721118 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index 4e37650..954a6b7 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -12,7 +12,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig index 92d851f..3a2c287 100644 --- a/configs/Wobo_i5_defconfig +++ b/configs/Wobo_i5_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=432 CONFIG_MMC0_CD_PIN="PB3" CONFIG_USB1_VBUS_PIN="PG12" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index 376fc2f..9a4743f 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -19,7 +19,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig index b8c923e..cd2b674 100644 --- a/configs/Yones_Toptech_BS1078_V2_defconfig +++ b/configs/Yones_Toptech_BS1078_V2_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig index afc8cff..65430c3 100644 --- a/configs/a64-olinuxino_defconfig +++ b/configs/a64-olinuxino_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/amarula_a64_relic_defconfig b/configs/amarula_a64_relic_defconfig index 4d546af..d41eb34 100644 --- a/configs/amarula_a64_relic_defconfig +++ b/configs/amarula_a64_relic_defconfig @@ -7,7 +7,6 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_VIDEO_DE2 is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index 49aa22c..dc47292 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -9,7 +9,6 @@ CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB2_VBUS_PIN="PH12" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/bananapi_m1_plus_defconfig b/configs/bananapi_m1_plus_defconfig index 96c3023..c534a54 100644 --- a/configs/bananapi_m1_plus_defconfig +++ b/configs/bananapi_m1_plus_defconfig @@ -9,7 +9,6 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig index 36a2fce..2799955 100644 --- a/configs/bananapi_m2_berry_defconfig +++ b/configs/bananapi_m2_berry_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=576 CONFIG_MMC0_CD_PIN="PH13" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry" diff --git a/configs/bananapi_m2_plus_h3_defconfig b/configs/bananapi_m2_plus_h3_defconfig index f45fd5e..87fa0a9 100644 --- a/configs/bananapi_m2_plus_h3_defconfig +++ b/configs/bananapi_m2_plus_h3_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=672 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/bananapi_m2_plus_h5_defconfig b/configs/bananapi_m2_plus_h5_defconfig index f7e23d4..bff6f37 100644 --- a/configs/bananapi_m2_plus_h5_defconfig +++ b/configs/bananapi_m2_plus_h5_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=672 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/bananapi_m2_zero_defconfig b/configs/bananapi_m2_zero_defconfig index 93d4880..8546674 100644 --- a/configs/bananapi_m2_zero_defconfig +++ b/configs/bananapi_m2_zero_defconfig @@ -5,7 +5,6 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 CONFIG_MMC0_CD_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig index 06d90dd..0f5d531 100644 --- a/configs/bananapi_m64_defconfig +++ b/configs/bananapi_m64_defconfig @@ -7,7 +7,6 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig index f16d0fe..f142cde 100644 --- a/configs/beelink_gs1_defconfig +++ b/configs/beelink_gs1_defconfig @@ -3,14 +3,16 @@ CONFIG_ARCH_SUNXI=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y +CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x20060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1" CONFIG_LED=y CONFIG_LED_GPIO=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y diff --git a/configs/beelink_x2_defconfig b/configs/beelink_x2_defconfig new file mode 100644 index 0000000..be94695 --- /dev/null +++ b/configs/beelink_x2_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN8I_H3=y +CONFIG_DRAM_CLK=567 +CONFIG_DRAM_ZQ=3881979 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-beelink-x2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_CONSOLE_MUX=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig index 7d6cd30..c9d5d4d 100644 --- a/configs/colorfly_e708_q1_defconfig +++ b/configs/colorfly_e708_q1_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/difrnce_dit4350_defconfig b/configs/difrnce_dit4350_defconfig index 02d233e..3600863 100644 --- a/configs/difrnce_dit4350_defconfig +++ b/configs/difrnce_dit4350_defconfig @@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig index e4f9d41..0a192a0 100644 --- a/configs/dserve_dsrv9703c_defconfig +++ b/configs/dserve_dsrv9703c_defconfig @@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/emlid_neutis_n5_devboard_defconfig b/configs/emlid_neutis_n5_devboard_defconfig index 3eb1ded..c1307aa 100644 --- a/configs/emlid_neutis_n5_devboard_defconfig +++ b/configs/emlid_neutis_n5_devboard_defconfig @@ -8,7 +8,6 @@ CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index ba86f48..d8eceac 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -17,7 +17,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index c440504..1cbee12 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig index d60576d..c1144c4 100644 --- a/configs/h8_homlet_v2_defconfig +++ b/configs/h8_homlet_v2_defconfig @@ -11,7 +11,6 @@ CONFIG_USB1_VBUS_PIN="PL6" CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 259bf4e..629aea9 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=384 CONFIG_MACPWR="PH21" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 935a11e..f7b2e4f 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index a829401..38d8048 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index 93bdddc..7144222 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/iNet_D978_rev2_defconfig b/configs/iNet_D978_rev2_defconfig index 1a8ee6b..c3fc0b2 100644 --- a/configs/iNet_D978_rev2_defconfig +++ b/configs/iNet_D978_rev2_defconfig @@ -17,7 +17,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig index ed54700..b745dac 100644 --- a/configs/icnova-a20-swac_defconfig +++ b/configs/icnova-a20-swac_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo CONFIG_VIDEO_LCD_POWER="PH22" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_UNZIP=y # CONFIG_CMD_FLASH is not set diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig index 25a907b..831b5d0 100644 --- a/configs/inet1_defconfig +++ b/configs/inet1_defconfig @@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/inet86dz_defconfig b/configs/inet86dz_defconfig index c007af9..77da929 100644 --- a/configs/inet86dz_defconfig +++ b/configs/inet86dz_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig index bc89a76..a5e4c6a 100644 --- a/configs/inet97fv2_defconfig +++ b/configs/inet97fv2_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig index b39c5f3..d96250d 100644 --- a/configs/inet98v_rev2_defconfig +++ b/configs/inet98v_rev2_defconfig @@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig index d46c99f..c19c10f 100644 --- a/configs/inet9f_rev03_defconfig +++ b/configs/inet9f_rev03_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig index 19a3c4c..66c7628 100644 --- a/configs/inet_q972_defconfig +++ b/configs/inet_q972_defconfig @@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 3bd4a18..974e63c 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -8,7 +8,6 @@ CONFIG_MACPWR="PH19" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/libretech_all_h3_cc_h2_plus_defconfig b/configs/libretech_all_h3_cc_h2_plus_defconfig index 7d7f542..7d42356 100644 --- a/configs/libretech_all_h3_cc_h2_plus_defconfig +++ b/configs/libretech_all_h3_cc_h2_plus_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/libretech_all_h3_cc_h3_defconfig b/configs/libretech_all_h3_cc_h3_defconfig index be82721..7ef0000 100644 --- a/configs/libretech_all_h3_cc_h3_defconfig +++ b/configs/libretech_all_h3_cc_h3_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig index ed2c6d5..1e22469 100644 --- a/configs/libretech_all_h3_cc_h5_defconfig +++ b/configs/libretech_all_h3_cc_h5_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=672 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 8d286a2..4dce096 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -9,7 +9,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PH24" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index c9dfa04..48659db 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=0 CONFIG_USB1_VBUS_PIN="PB10" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 6ecabce..58986e3 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB2_VBUS_PIN="PH12" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 4474d03..243a195 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -4,7 +4,6 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN4I=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/nanopi_a64_defconfig b/configs/nanopi_a64_defconfig index 0845a5c..eb031e6 100644 --- a/configs/nanopi_a64_defconfig +++ b/configs/nanopi_a64_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/nanopi_m1_defconfig b/configs/nanopi_m1_defconfig index 1dc2538..f021d87 100644 --- a/configs/nanopi_m1_defconfig +++ b/configs/nanopi_m1_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/nanopi_m1_plus_defconfig b/configs/nanopi_m1_plus_defconfig index 90edbd9..c676579 100644 --- a/configs/nanopi_m1_plus_defconfig +++ b/configs/nanopi_m1_plus_defconfig @@ -8,7 +8,6 @@ CONFIG_MACPWR="PD6" CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/nanopi_neo2_defconfig b/configs/nanopi_neo2_defconfig index 953fe23..984d9dd 100644 --- a/configs/nanopi_neo2_defconfig +++ b/configs/nanopi_neo2_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig index 5ad90dd..bba31fc 100644 --- a/configs/nanopi_neo_air_defconfig +++ b/configs/nanopi_neo_air_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=408 # CONFIG_VIDEO_DE2 is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig index e7d6ce4..af36ad4 100644 --- a/configs/nanopi_neo_defconfig +++ b/configs/nanopi_neo_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=408 # CONFIG_VIDEO_DE2 is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig index 4096a61..3aa9cea 100644 --- a/configs/nanopi_neo_plus2_defconfig +++ b/configs/nanopi_neo_plus2_defconfig @@ -9,7 +9,6 @@ CONFIG_DRAM_ZQ=3881977 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/oceanic_5205_5inmfd_defconfig b/configs/oceanic_5205_5inmfd_defconfig index 645e02a..219de7a 100644 --- a/configs/oceanic_5205_5inmfd_defconfig +++ b/configs/oceanic_5205_5inmfd_defconfig @@ -10,7 +10,6 @@ CONFIG_DRAM_ZQ=3881949 CONFIG_MMC0_CD_PIN="" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig index 803c061..a561a11 100644 --- a/configs/orangepi_2_defconfig +++ b/configs/orangepi_2_defconfig @@ -7,7 +7,6 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 CONFIG_USB1_VBUS_PIN="PG13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig index e5c2846..74c11d8 100644 --- a/configs/orangepi_lite2_defconfig +++ b/configs/orangepi_lite2_defconfig @@ -3,11 +3,13 @@ CONFIG_ARCH_SUNXI=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y +CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MMC0_CD_PIN="PF6" # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x20060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2" +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_lite_defconfig b/configs/orangepi_lite_defconfig index 8621ca3..8b274e6 100644 --- a/configs/orangepi_lite_defconfig +++ b/configs/orangepi_lite_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig index d51491d..b56588a 100644 --- a/configs/orangepi_one_defconfig +++ b/configs/orangepi_one_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig index 65537c4..f86bb29 100644 --- a/configs/orangepi_one_plus_defconfig +++ b/configs/orangepi_one_plus_defconfig @@ -3,11 +3,13 @@ CONFIG_ARCH_SUNXI=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y +CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MMC0_CD_PIN="PF6" # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x20060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-one-plus" +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig index 1069cc7..15ad3af 100644 --- a/configs/orangepi_pc2_defconfig +++ b/configs/orangepi_pc2_defconfig @@ -9,7 +9,6 @@ CONFIG_DRAM_ZQ=3881977 CONFIG_MACPWR="PD6" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig index e4626f0..7fe516e 100644 --- a/configs/orangepi_pc_defconfig +++ b/configs/orangepi_pc_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=624 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/orangepi_pc_plus_defconfig b/configs/orangepi_pc_plus_defconfig index a9e00fc..8586bfc 100644 --- a/configs/orangepi_pc_plus_defconfig +++ b/configs/orangepi_pc_plus_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=624 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/orangepi_plus2e_defconfig b/configs/orangepi_plus2e_defconfig index 592fb9d..59294bc 100644 --- a/configs/orangepi_plus2e_defconfig +++ b/configs/orangepi_plus2e_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=672 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig index 6433d0b..e632954 100644 --- a/configs/orangepi_plus_defconfig +++ b/configs/orangepi_plus_defconfig @@ -9,7 +9,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PG13" CONFIG_SATAPWR="PG11" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig index d862674..8a82669 100644 --- a/configs/orangepi_prime_defconfig +++ b/configs/orangepi_prime_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig index 2b2d6f2..d80d83a 100644 --- a/configs/orangepi_r1_defconfig +++ b/configs/orangepi_r1_defconfig @@ -8,7 +8,6 @@ CONFIG_DRAM_CLK=624 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1" CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig index 59e9639..5b800b5 100644 --- a/configs/orangepi_win_defconfig +++ b/configs/orangepi_win_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig index c354c8b..69471de 100644 --- a/configs/orangepi_zero_defconfig +++ b/configs/orangepi_zero_defconfig @@ -8,7 +8,6 @@ CONFIG_DRAM_CLK=624 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-zero" CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index 7610179..ed417dc 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -9,7 +9,6 @@ CONFIG_DRAM_ZQ=3881977 CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/orangepi_zero_plus_defconfig b/configs/orangepi_zero_plus_defconfig index 671d871..ad3a6b7 100644 --- a/configs/orangepi_zero_plus_defconfig +++ b/configs/orangepi_zero_plus_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=624 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/parrot_r16_defconfig b/configs/parrot_r16_defconfig index 56b476b..5014745 100644 --- a/configs/parrot_r16_defconfig +++ b/configs/parrot_r16_defconfig @@ -12,7 +12,6 @@ CONFIG_USB0_ID_DET="PD10" CONFIG_USB1_VBUS_PIN="PD12" CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_PARTITION_UUIDS is not set diff --git a/configs/pine64-lts_defconfig b/configs/pine64-lts_defconfig index 0ee1e05..0da6b70 100644 --- a/configs/pine64-lts_defconfig +++ b/configs/pine64-lts_defconfig @@ -10,7 +10,6 @@ CONFIG_MMC0_CD_PIN="" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index c112ea0..65ea32d 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_PINE64_DT_SELECTION=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig index 5ac89b4..dd1368a 100644 --- a/configs/pine_h64_defconfig +++ b/configs/pine_h64_defconfig @@ -3,12 +3,15 @@ CONFIG_ARCH_SUNXI=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y +CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x20060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64" +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB3_VBUS_PIN="PL5" diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig index 75cb056..2760f8c 100644 --- a/configs/pinebook_defconfig +++ b/configs/pinebook_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_R_I2C_ENABLE=y -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/polaroid_mid2407pxe03_defconfig b/configs/polaroid_mid2407pxe03_defconfig index a2be518..0186a69 100644 --- a/configs/polaroid_mid2407pxe03_defconfig +++ b/configs/polaroid_mid2407pxe03_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig index 6ab4e4e..265e6b8 100644 --- a/configs/polaroid_mid2809pxe04_defconfig +++ b/configs/polaroid_mid2809pxe04_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig index d94b316..80cdacf 100644 --- a/configs/pov_protab2_ips9_defconfig +++ b/configs/pov_protab2_ips9_defconfig @@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig index 6607a48..8f81b9a 100644 --- a/configs/q8_a13_tablet_defconfig +++ b/configs/q8_a13_tablet_defconfig @@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index c2eb17f..0413268 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig index 2ceda4e..7367306 100644 --- a/configs/q8_a33_tablet_1024x600_defconfig +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig index 3cd7f8f..03006e3 100644 --- a/configs/q8_a33_tablet_800x480_defconfig +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 7fbe541..500d5e9 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=384 CONFIG_USB1_VBUS_PIN="PG13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig index acd6dd6..e47218c 100644 --- a/configs/sopine_baseboard_defconfig +++ b/configs/sopine_baseboard_defconfig @@ -11,7 +11,6 @@ CONFIG_MMC0_CD_PIN="" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig index ef1bd21..3543e95 100644 --- a/configs/sun8i_a23_evb_defconfig +++ b/configs/sun8i_a23_evb_defconfig @@ -9,7 +9,6 @@ CONFIG_USB0_VBUS_PIN="axp_drivebus" CONFIG_USB0_VBUS_DET="axp_vbus_detect" CONFIG_USB1_VBUS_PIN="PH7" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index 4bd6099..62b6838 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -11,7 +11,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/tbs_a711_defconfig b/configs/tbs_a711_defconfig index 5d6ffab..d56bf68 100644 --- a/configs/tbs_a711_defconfig +++ b/configs/tbs_a711_defconfig @@ -13,7 +13,6 @@ CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH11" CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_TEXT_BASE=0x60 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/configs/teres_i_defconfig b/configs/teres_i_defconfig index 1b57a48..421a8d3 100644 --- a/configs/teres_i_defconfig +++ b/configs/teres_i_defconfig @@ -7,7 +7,6 @@ CONFIG_DRAM_ZQ=3881949 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PL7" CONFIG_I2C0_ENABLE=y -CONFIG_SPL_TEXT_BASE=0x10060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set diff --git a/drivers/clk/sunxi/clk_h6.c b/drivers/clk/sunxi/clk_h6.c index 0bb00f4..105c15d 100644 --- a/drivers/clk/sunxi/clk_h6.c +++ b/drivers/clk/sunxi/clk_h6.c @@ -28,6 +28,22 @@ static struct ccu_clk_gate h6_gates[] = { [CLK_BUS_SPI1] = GATE(0x96c, BIT(1)), [CLK_BUS_EMAC] = GATE(0x97c, BIT(0)), + + [CLK_USB_PHY0] = GATE(0xa70, BIT(29)), + [CLK_USB_OHCI0] = GATE(0xa70, BIT(31)), + + [CLK_USB_PHY1] = GATE(0xa74, BIT(29)), + + [CLK_USB_HSIC] = GATE(0xa7c, BIT(26)), + [CLK_USB_HSIC_12M] = GATE(0xa7c, BIT(27)), + [CLK_USB_PHY3] = GATE(0xa7c, BIT(29)), + [CLK_USB_OHCI3] = GATE(0xa7c, BIT(31)), + + [CLK_BUS_OHCI0] = GATE(0xa8c, BIT(0)), + [CLK_BUS_OHCI3] = GATE(0xa8c, BIT(3)), + [CLK_BUS_EHCI0] = GATE(0xa8c, BIT(4)), + [CLK_BUS_EHCI3] = GATE(0xa8c, BIT(7)), + [CLK_BUS_OTG] = GATE(0xa8c, BIT(8)), }; static struct ccu_reset h6_resets[] = { @@ -43,6 +59,19 @@ static struct ccu_reset h6_resets[] = { [RST_BUS_SPI1] = RESET(0x96c, BIT(17)), [RST_BUS_EMAC] = RESET(0x97c, BIT(16)), + + [RST_USB_PHY0] = RESET(0xa70, BIT(30)), + + [RST_USB_PHY1] = RESET(0xa74, BIT(30)), + + [RST_USB_HSIC] = RESET(0xa7c, BIT(28)), + [RST_USB_PHY3] = RESET(0xa7c, BIT(30)), + + [RST_BUS_OHCI0] = RESET(0xa8c, BIT(16)), + [RST_BUS_OHCI3] = RESET(0xa8c, BIT(19)), + [RST_BUS_EHCI0] = RESET(0xa8c, BIT(20)), + [RST_BUS_EHCI3] = RESET(0xa8c, BIT(23)), + [RST_BUS_OTG] = RESET(0xa8c, BIT(24)), }; static const struct ccu_desc h6_ccu_desc = { diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 068c6d0..800584f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -215,6 +215,12 @@ config SANDBOX_GPIO_COUNT of 'anonymous' GPIOs that do not belong to any device or bank. Select a suitable value depending on your needs. +config SUNXI_GPIO + bool "Allwinner GPIO driver" + depends on ARCH_SUNXI + help + Support the GPIO device in Allwinner SoCs. + config XILINX_GPIO bool "Xilinx GPIO driver" depends on DM_GPIO diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index cbed8d4..719efc2 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -354,12 +354,14 @@ static const struct udevice_id sunxi_gpio_ids[] = { ID("allwinner,sun8i-v3s-pinctrl", a_all), ID("allwinner,sun9i-a80-pinctrl", a_all), ID("allwinner,sun50i-a64-pinctrl", a_all), + ID("allwinner,sun50i-h6-pinctrl", a_all), ID("allwinner,sun6i-a31-r-pinctrl", l_2), ID("allwinner,sun8i-a23-r-pinctrl", l_1), ID("allwinner,sun8i-a83t-r-pinctrl", l_1), ID("allwinner,sun8i-h3-r-pinctrl", l_1), ID("allwinner,sun9i-a80-r-pinctrl", l_3), ID("allwinner,sun50i-a64-r-pinctrl", l_1), + ID("allwinner,sun50i-h6-r-pinctrl", l_2), { } }; diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index f206fa3..5e8f877 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -75,6 +75,7 @@ enum sun4i_usb_phy_type { sun8i_h3_phy, sun8i_v3s_phy, sun50i_a64_phy, + sun50i_h6_phy, }; struct sun4i_usb_phy_cfg { @@ -85,6 +86,7 @@ struct sun4i_usb_phy_cfg { bool dedicated_clocks; bool enable_pmu_unk1; bool phy0_dual_route; + int missing_phys; }; struct sun4i_usb_phy_info { @@ -349,6 +351,9 @@ static int sun4i_usb_phy_xlate(struct phy *phy, if (args->args_count >= data->cfg->num_phys) return -EINVAL; + if (data->cfg->missing_phys & BIT(args->args[0])) + return -ENODEV; + if (args->args_count) phy->id = args->args[0]; else @@ -429,6 +434,9 @@ static int sun4i_usb_phy_probe(struct udevice *dev) struct sun4i_usb_phy_info *info = &phy_info[i]; char name[16]; + if (data->cfg->missing_phys & BIT(i)) + continue; + phy->gpio_vbus = sunxi_name_to_gpio(info->gpio_vbus); if (phy->gpio_vbus >= 0) { ret = gpio_request(phy->gpio_vbus, "usb_vbus"); @@ -583,6 +591,17 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .phy0_dual_route = true, }; +static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { + .num_phys = 4, + .type = sun50i_h6_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .enable_pmu_unk1 = true, + .phy0_dual_route = true, + .missing_phys = BIT(1) | BIT(2), +}; + static const struct udevice_id sun4i_usb_phy_ids[] = { { .compatible = "allwinner,sun4i-a10-usb-phy", .data = (ulong)&sun4i_a10_cfg }, { .compatible = "allwinner,sun5i-a13-usb-phy", .data = (ulong)&sun5i_a13_cfg }, @@ -594,6 +613,7 @@ static const struct udevice_id sun4i_usb_phy_ids[] = { { .compatible = "allwinner,sun8i-h3-usb-phy", .data = (ulong)&sun8i_h3_cfg }, { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = (ulong)&sun8i_v3s_cfg }, { .compatible = "allwinner,sun50i-a64-usb-phy", .data = (ulong)&sun50i_a64_cfg}, + { .compatible = "allwinner,sun50i-h6-usb-phy", .data = (ulong)&sun50i_h6_cfg}, { } }; diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index fceb812..7be94ee 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -257,9 +257,6 @@ extern int soft_i2c_gpio_scl; #endif #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ -/* GPIO */ -#define CONFIG_SUNXI_GPIO - #ifdef CONFIG_VIDEO_SUNXI /* * The amount of RAM to keep free at the top of RAM when relocating u-boot, diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 44c0396..79872ba 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1826,7 +1826,6 @@ CONFIG_STV0991 CONFIG_STV0991_HZ CONFIG_STV0991_HZ_CLOCK CONFIG_ST_SMI -CONFIG_SUNXI_GPIO CONFIG_SUNXI_MAX_FB_SIZE CONFIG_SUVD3 CONFIG_SXNI855T |