diff options
-rw-r--r-- | MAINTAINERS | 7 | ||||
-rw-r--r-- | common/Kconfig | 56 | ||||
-rw-r--r-- | common/Makefile | 1 | ||||
-rw-r--r-- | common/log.c | 244 | ||||
-rw-r--r-- | include/asm-generic/global_data.h | 5 | ||||
-rw-r--r-- | include/log.h | 242 |
6 files changed, 555 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c024b41..7cda689 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -310,6 +310,13 @@ S: Maintained T: git git://git.denx.de/u-boot-i2c.git F: drivers/i2c/ +LOGGING +M: Simon Glass <sjg@chromium.org> +S: Maintained +T: git git://git.denx.de/u-boot.git +F: common/log.c +F: cmd/log.c + MICROBLAZE M: Michal Simek <monstr@monstr.eu> S: Maintained diff --git a/common/Kconfig b/common/Kconfig index c50d6eb..9747443 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -420,6 +420,62 @@ config SYS_STDIO_DEREGISTER endmenu +menu "Logging" + +config LOG + bool "Enable logging support" + help + This enables support for logging of status and debug messages. These + can be displayed on the console, recorded in a memory buffer, or + discarded if not needed. Logging supports various categories and + levels of severity. + +config SPL_LOG + bool "Enable logging support in SPL" + help + This enables support for logging of status and debug messages. These + can be displayed on the console, recorded in a memory buffer, or + discarded if not needed. Logging supports various categories and + levels of severity. + +config LOG_MAX_LEVEL + int "Maximum log level to record" + depends on LOG + default 5 + help + This selects the maximum log level that will be recorded. Any value + higher than this will be ignored. If possible log statements below + this level will be discarded at build time. Levels: + + 0 - panic + 1 - critical + 2 - error + 3 - warning + 4 - note + 5 - info + 6 - detail + 7 - debug + +config SPL_LOG_MAX_LEVEL + int "Maximum log level to record in SPL" + depends on SPL_LOG + default 3 + help + This selects the maximum log level that will be recorded. Any value + higher than this will be ignored. If possible log statements below + this level will be discarded at build time. Levels: + + 0 - panic + 1 - critical + 2 - error + 3 - warning + 4 - note + 5 - info + 6 - detail + 7 - debug + +endmenu + config DEFAULT_FDT_FILE string "Default fdt file" help diff --git a/common/Makefile b/common/Makefile index cec506f..f4b6327 100644 --- a/common/Makefile +++ b/common/Makefile @@ -128,5 +128,6 @@ obj-y += cli.o obj-$(CONFIG_FSL_DDR_INTERACTIVE) += cli_simple.o cli_readline.o obj-$(CONFIG_CMD_DFU) += dfu.o obj-y += command.o +obj-$(CONFIG_$(SPL_)LOG) += log.o obj-y += s_record.o obj-y += xyzModem.o diff --git a/common/log.c b/common/log.c new file mode 100644 index 0000000..8f36c79 --- /dev/null +++ b/common/log.c @@ -0,0 +1,244 @@ +/* + * Logging support + * + * Copyright (c) 2017 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <log.h> +#include <malloc.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct log_device *log_device_find_by_name(const char *drv_name) +{ + struct log_device *ldev; + + list_for_each_entry(ldev, &gd->log_head, sibling_node) { + if (!strcmp(drv_name, ldev->drv->name)) + return ldev; + } + + return NULL; +} + +/** + * log_has_cat() - check if a log category exists within a list + * + * @cat_list: List of categories to check, at most LOGF_MAX_CATEGORIES entries + * long, terminated by LC_END if fewer + * @cat: Category to search for + * @return true if @cat is in @cat_list, else false + */ +static bool log_has_cat(enum log_category_t cat_list[], enum log_category_t cat) +{ + int i; + + for (i = 0; i < LOGF_MAX_CATEGORIES && cat_list[i] != LOGC_END; i++) { + if (cat_list[i] == cat) + return true; + } + + return false; +} + +/** + * log_has_file() - check if a file is with a list + * + * @file_list: List of files to check, separated by comma + * @file: File to check for. This string is matched against the end of each + * file in the list, i.e. ignoring any preceding path. The list is + * intended to consist of relative pathnames, e.g. common/main.c,cmd/log.c + * @return true if @file is in @file_list, else false + */ +static bool log_has_file(const char *file_list, const char *file) +{ + int file_len = strlen(file); + const char *s, *p; + int substr_len; + + for (s = file_list; *s; s = p + (*p != '\0')) { + p = strchrnul(s, ','); + substr_len = p - s; + if (file_len >= substr_len && + !strncmp(file + file_len - substr_len, s, substr_len)) + return true; + } + + return false; +} + +/** + * log_passes_filters() - check if a log record passes the filters for a device + * + * @ldev: Log device to check + * @rec: Log record to check + * @return true if @rec is not blocked by the filters in @ldev, false if it is + */ +static bool log_passes_filters(struct log_device *ldev, struct log_rec *rec) +{ + struct log_filter *filt; + + /* If there are no filters, filter on the default log level */ + if (list_empty(&ldev->filter_head)) { + if (rec->level > gd->default_log_level) + return false; + return true; + } + + list_for_each_entry(filt, &ldev->filter_head, sibling_node) { + if (rec->level > filt->max_level) + continue; + if ((filt->flags & LOGFF_HAS_CAT) && + !log_has_cat(filt->cat_list, rec->cat)) + continue; + if (filt->file_list && + !log_has_file(filt->file_list, rec->file)) + continue; + return true; + } + + return false; +} + +/** + * log_dispatch() - Send a log record to all log devices for processing + * + * The log record is sent to each log device in turn, skipping those which have + * filters which block the record + * + * @rec: Log record to dispatch + * @return 0 (meaning success) + */ +static int log_dispatch(struct log_rec *rec) +{ + struct log_device *ldev; + + list_for_each_entry(ldev, &gd->log_head, sibling_node) { + if (log_passes_filters(ldev, rec)) + ldev->drv->emit(ldev, rec); + } + + return 0; +} + +int _log(enum log_category_t cat, enum log_level_t level, const char *file, + int line, const char *func, const char *fmt, ...) +{ + char buf[CONFIG_SYS_CBSIZE]; + struct log_rec rec; + va_list args; + + rec.cat = cat; + rec.level = level; + rec.file = file; + rec.line = line; + rec.func = func; + va_start(args, fmt); + vsnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + rec.msg = buf; + if (!gd || !(gd->flags & GD_FLG_LOG_READY)) { + if (gd) + gd->log_drop_count++; + return -ENOSYS; + } + log_dispatch(&rec); + + return 0; +} + +int log_add_filter(const char *drv_name, enum log_category_t cat_list[], + enum log_level_t max_level, const char *file_list) +{ + struct log_filter *filt; + struct log_device *ldev; + int i; + + ldev = log_device_find_by_name(drv_name); + if (!ldev) + return -ENOENT; + filt = (struct log_filter *)calloc(1, sizeof(*filt)); + if (!filt) + return -ENOMEM; + + if (cat_list) { + filt->flags |= LOGFF_HAS_CAT; + for (i = 0; ; i++) { + if (i == ARRAY_SIZE(filt->cat_list)) + return -ENOSPC; + filt->cat_list[i] = cat_list[i]; + if (cat_list[i] == LOGC_END) + break; + } + } + filt->max_level = max_level; + if (file_list) { + filt->file_list = strdup(file_list); + if (!filt->file_list) + goto nomem; + } + filt->filter_num = ldev->next_filter_num++; + list_add_tail(&filt->sibling_node, &ldev->filter_head); + + return filt->filter_num; + +nomem: + free(filt); + return -ENOMEM; +} + +int log_remove_filter(const char *drv_name, int filter_num) +{ + struct log_filter *filt; + struct log_device *ldev; + + ldev = log_device_find_by_name(drv_name); + if (!ldev) + return -ENOENT; + + list_for_each_entry(filt, &ldev->filter_head, sibling_node) { + if (filt->filter_num == filter_num) { + list_del(&filt->sibling_node); + free(filt); + + return 0; + } + } + + return -ENOENT; +} + +int log_init(void) +{ + struct log_driver *drv = ll_entry_start(struct log_driver, log_driver); + const int count = ll_entry_count(struct log_driver, log_driver); + struct log_driver *end = drv + count; + + /* + * We cannot add runtime data to the driver since it is likely stored + * in rodata. Instead, set up a 'device' corresponding to each driver. + * We only support having a single device. + */ + INIT_LIST_HEAD((struct list_head *)&gd->log_head); + while (drv < end) { + struct log_device *ldev; + + ldev = calloc(1, sizeof(*ldev)); + if (!ldev) { + debug("%s: Cannot allocate memory\n", __func__); + return -ENOMEM; + } + INIT_LIST_HEAD(&ldev->filter_head); + ldev->drv = drv; + list_add_tail(&ldev->sibling_node, + (struct list_head *)&gd->log_head); + drv++; + } + gd->default_log_level = LOGL_INFO; + + return 0; +} diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 79197ac..77755db 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -114,6 +114,11 @@ typedef struct global_data { struct bootstage_data *bootstage; /* Bootstage information */ struct bootstage_data *new_bootstage; /* Relocated bootstage info */ #endif +#ifdef CONFIG_LOG + int log_drop_count; /* Number of dropped log messages */ + int default_log_level; /* For devices with no filters */ + struct list_head log_head; /* List of struct log_device */ +#endif } gd_t; #endif diff --git a/include/log.h b/include/log.h index 08ad44c..1e9124c 100644 --- a/include/log.h +++ b/include/log.h @@ -10,6 +10,94 @@ #ifndef __LOG_H #define __LOG_H +#include <dm/uclass-id.h> +#include <linux/list.h> + +/** Log levels supported, ranging from most to least important */ +enum log_level_t { + LOGL_EMERG = 0, /*U-Boot is unstable */ + LOGL_ALERT, /* Action must be taken immediately */ + LOGL_CRIT, /* Critical conditions */ + LOGL_ERR, /* Error that prevents something from working */ + LOGL_WARNING, /* Warning may prevent optimial operation */ + LOGL_NOTICE, /* Normal but significant condition, printf() */ + LOGL_INFO, /* General information message */ + LOGL_DEBUG, /* Basic debug-level message */ + LOGL_DEBUG_CONTENT, /* Debug message showing full message content */ + LOGL_DEBUG_IO, /* Debug message showing hardware I/O access */ + + LOGL_COUNT, + LOGL_FIRST = LOGL_EMERG, + LOGL_MAX = LOGL_DEBUG, +}; + +/** + * Log categories supported. Most of these correspond to uclasses (i.e. + * enum uclass_id) but there are also some more generic categories + */ +enum log_category_t { + LOGC_FIRST = 0, /* First part mirrors UCLASS_... */ + + LOGC_NONE = UCLASS_COUNT, + LOGC_ARCH, + LOGC_BOARD, + LOGC_CORE, + LOGC_DT, + + LOGC_COUNT, + LOGC_END, +}; + +/* Helper to cast a uclass ID to a log category */ +static inline int log_uc_cat(enum uclass_id id) +{ + return (enum log_category_t)id; +} + +/** + * _log() - Internal function to emit a new log record + * + * @cat: Category of log record (indicating which subsystem generated it) + * @level: Level of log record (indicating its severity) + * @file: File name of file where log record was generated + * @line: Line number in file where log record was generated + * @func: Function where log record was generated + * @fmt: printf() format string for log record + * @...: Optional parameters, according to the format string @fmt + * @return 0 if log record was emitted, -ve on error + */ +int _log(enum log_category_t cat, enum log_level_t level, const char *file, + int line, const char *func, const char *fmt, ...); + +/* Define this at the top of a file to add a prefix to debug messages */ +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + +/* Use a default category if this file does not supply one */ +#ifndef LOG_CATEGORY +#define LOG_CATEGORY LOGC_NONE +#endif + +/* + * This header may be including when CONFIG_LOG is disabled, in which case + * CONFIG_LOG_MAX_LEVEL is not defined. Add a check for this. + */ +#if CONFIG_IS_ENABLED(LOG) +#define _LOG_MAX_LEVEL CONFIG_VAL(LOG_MAX_LEVEL) +#else +#define _LOG_MAX_LEVEL LOGL_INFO +#endif + +/* Emit a log record if the level is less that the maximum */ +#define log(_cat, _level, _fmt, _args...) ({ \ + int _l = _level; \ + if (_l <= _LOG_MAX_LEVEL) \ + _log((enum log_category_t)(_cat), _l, __FILE__, __LINE__, \ + __func__, \ + pr_fmt(_fmt), ##_args); \ + }) + #ifdef DEBUG #define _DEBUG 1 #else @@ -22,6 +110,16 @@ #define _SPL_BUILD 0 #endif +#if !_DEBUG && CONFIG_IS_ENABLED(LOG) + +#define debug_cond(cond, fmt, args...) \ + do { \ + if (1) \ + log(LOG_CATEGORY, LOGL_DEBUG, fmt, ##args); \ + } while (0) + +#else /* _DEBUG */ + /* * Output a debug text when condition "cond" is met. The "cond" should be * computed by a preprocessor in the best case, allowing for the best @@ -33,6 +131,8 @@ printf(pr_fmt(fmt), ##args); \ } while (0) +#endif /* _DEBUG */ + /* Show a message if DEBUG is defined in a file */ #define debug(fmt, args...) \ debug_cond(_DEBUG, fmt, ##args) @@ -56,4 +156,146 @@ void __assert_fail(const char *assertion, const char *file, unsigned int line, ({ if (!(x) && _DEBUG) \ __assert_fail(#x, __FILE__, __LINE__, __func__); }) +/** + * struct log_rec - a single log record + * + * Holds information about a single record in the log + * + * Members marked as 'not allocated' are stored as pointers and the caller is + * responsible for making sure that the data pointed to is not overwritten. + * Memebers marked as 'allocated' are allocated (e.g. via strdup()) by the log + * system. + * + * @cat: Category, representing a uclass or part of U-Boot + * @level: Severity level, less severe is higher + * @file: Name of file where the log record was generated (not allocated) + * @line: Line number where the log record was generated + * @func: Function where the log record was generated (not allocated) + * @msg: Log message (allocated) + */ +struct log_rec { + enum log_category_t cat; + enum log_level_t level; + const char *file; + int line; + const char *func; + const char *msg; +}; + +struct log_device; + +/** + * struct log_driver - a driver which accepts and processes log records + * + * @name: Name of driver + */ +struct log_driver { + const char *name; + /** + * emit() - emit a log record + * + * Called by the log system to pass a log record to a particular driver + * for processing. The filter is checked before calling this function. + */ + int (*emit)(struct log_device *ldev, struct log_rec *rec); +}; + +/** + * struct log_device - an instance of a log driver + * + * Since drivers are set up at build-time we need to have a separate device for + * the run-time aspects of drivers (currently just a list of filters to apply + * to records send to this device). + * + * @next_filter_num: Seqence number of next filter filter added (0=no filters + * yet). This increments with each new filter on the device, but never + * decrements + * @drv: Pointer to driver for this device + * @filter_head: List of filters for this device + * @sibling_node: Next device in the list of all devices + */ +struct log_device { + int next_filter_num; + struct log_driver *drv; + struct list_head filter_head; + struct list_head sibling_node; +}; + +enum { + LOGF_MAX_CATEGORIES = 5, /* maximum categories per filter */ +}; + +enum log_filter_flags { + LOGFF_HAS_CAT = 1 << 0, /* Filter has a category list */ +}; + +/** + * struct log_filter - criterial to filter out log messages + * + * @filter_num: Sequence number of this filter. This is returned when adding a + * new filter, and must be provided when removing a previously added + * filter. + * @flags: Flags for this filter (LOGFF_...) + * @cat_list: List of categories to allow (terminated by LOGC_none). If empty + * then all categories are permitted. Up to LOGF_MAX_CATEGORIES entries + * can be provided + * @max_level: Maximum log level to allow + * @file_list: List of files to allow, separated by comma. If NULL then all + * files are permitted + * @sibling_node: Next filter in the list of filters for this log device + */ +struct log_filter { + int filter_num; + int flags; + enum log_category_t cat_list[LOGF_MAX_CATEGORIES]; + enum log_level_t max_level; + const char *file_list; + struct list_head sibling_node; +}; + +#define LOG_DRIVER(_name) \ + ll_entry_declare(struct log_driver, _name, log_driver) + +/** + * log_add_filter() - Add a new filter to a log device + * + * @drv_name: Driver name to add the filter to (since each driver only has a + * single device) + * @cat_list: List of categories to allow (terminated by LOGC_none). If empty + * then all categories are permitted. Up to LOGF_MAX_CATEGORIES entries + * can be provided + * @max_level: Maximum log level to allow + * @file_list: List of files to allow, separated by comma. If NULL then all + * files are permitted + * @return the sequence number of the new filter (>=0) if the filter was added, + * or a -ve value on error + */ +int log_add_filter(const char *drv_name, enum log_category_t cat_list[], + enum log_level_t max_level, const char *file_list); + +/** + * log_remove_filter() - Remove a filter from a log device + * + * @drv_name: Driver name to remove the filter from (since each driver only has + * a single device) + * @filter_num: Filter number to remove (as returned by log_add_filter()) + * @return 0 if the filter was removed, -ENOENT if either the driver or the + * filter number was not found + */ +int log_remove_filter(const char *drv_name, int filter_num); + +#if CONFIG_IS_ENABLED(LOG) +/** + * log_init() - Set up the log system ready for use + * + * @return 0 if OK, -ENOMEM if out of memory + */ +int log_init(void); +#else +static inline int log_init(void) +{ + return 0; +} +#endif + #endif |