diff options
-rw-r--r-- | arch/arm/include/asm/arch-mx6/imx-regs.h | 3 | ||||
-rw-r--r-- | board/wandboard/spl.c | 125 | ||||
-rw-r--r-- | board/wandboard/wandboard.c | 6 | ||||
-rw-r--r-- | include/configs/wandboard.h | 2 |
4 files changed, 132 insertions, 4 deletions
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 86e2670..624ccec 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -346,6 +346,9 @@ #define IOMUXC_SNVS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x90000) #define SNVS_GPR_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x94000) #endif + +#define NOC_DDR_BASE_ADDR (GPV0_BASE_ADDR + 0xB0000) + /* Only for i.MX6SX */ #define LCDIF2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x24000) #define MX6SX_LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000) diff --git a/board/wandboard/spl.c b/board/wandboard/spl.c index 00c75d0..d6f568b 100644 --- a/board/wandboard/spl.c +++ b/board/wandboard/spl.c @@ -32,6 +32,7 @@ DECLARE_GLOBAL_DATA_PTR; #define IMX6DQ_DRIVE_STRENGTH 0x30 #define IMX6SDL_DRIVE_STRENGTH 0x28 +#define IMX6QP_DRIVE_STRENGTH 0x28 /* configure MX6Q/DUAL mmdc DDR io registers */ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { @@ -63,6 +64,36 @@ static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, }; +/* configure MX6QP mmdc DDR io registers */ +static struct mx6dq_iomux_ddr_regs mx6qp_ddr_ioregs = { + .dram_sdclk_0 = IMX6QP_DRIVE_STRENGTH, + .dram_sdclk_1 = IMX6QP_DRIVE_STRENGTH, + .dram_cas = IMX6QP_DRIVE_STRENGTH, + .dram_ras = IMX6QP_DRIVE_STRENGTH, + .dram_reset = IMX6QP_DRIVE_STRENGTH, + .dram_sdcke0 = IMX6QP_DRIVE_STRENGTH, + .dram_sdcke1 = IMX6QP_DRIVE_STRENGTH, + .dram_sdba2 = 0x00000000, + .dram_sdodt0 = IMX6QP_DRIVE_STRENGTH, + .dram_sdodt1 = IMX6QP_DRIVE_STRENGTH, + .dram_sdqs0 = IMX6QP_DRIVE_STRENGTH, + .dram_sdqs1 = IMX6QP_DRIVE_STRENGTH, + .dram_sdqs2 = IMX6QP_DRIVE_STRENGTH, + .dram_sdqs3 = IMX6QP_DRIVE_STRENGTH, + .dram_sdqs4 = IMX6QP_DRIVE_STRENGTH, + .dram_sdqs5 = IMX6QP_DRIVE_STRENGTH, + .dram_sdqs6 = IMX6QP_DRIVE_STRENGTH, + .dram_sdqs7 = IMX6QP_DRIVE_STRENGTH, + .dram_dqm0 = IMX6QP_DRIVE_STRENGTH, + .dram_dqm1 = IMX6QP_DRIVE_STRENGTH, + .dram_dqm2 = IMX6QP_DRIVE_STRENGTH, + .dram_dqm3 = IMX6QP_DRIVE_STRENGTH, + .dram_dqm4 = IMX6QP_DRIVE_STRENGTH, + .dram_dqm5 = IMX6QP_DRIVE_STRENGTH, + .dram_dqm6 = IMX6QP_DRIVE_STRENGTH, + .dram_dqm7 = IMX6QP_DRIVE_STRENGTH, +}; + /* configure MX6Q/DUAL mmdc GRP io registers */ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { .grp_ddr_type = 0x000c0000, @@ -81,6 +112,24 @@ static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { .grp_b7ds = IMX6DQ_DRIVE_STRENGTH, }; +/* configure MX6QP mmdc GRP io registers */ +static struct mx6dq_iomux_grp_regs mx6qp_grp_ioregs = { + .grp_ddr_type = 0x000c0000, + .grp_ddrmode_ctl = 0x00020000, + .grp_ddrpke = 0x00000000, + .grp_addds = IMX6QP_DRIVE_STRENGTH, + .grp_ctlds = IMX6QP_DRIVE_STRENGTH, + .grp_ddrmode = 0x00020000, + .grp_b0ds = IMX6QP_DRIVE_STRENGTH, + .grp_b1ds = IMX6QP_DRIVE_STRENGTH, + .grp_b2ds = IMX6QP_DRIVE_STRENGTH, + .grp_b3ds = IMX6QP_DRIVE_STRENGTH, + .grp_b4ds = IMX6QP_DRIVE_STRENGTH, + .grp_b5ds = IMX6QP_DRIVE_STRENGTH, + .grp_b6ds = IMX6QP_DRIVE_STRENGTH, + .grp_b7ds = IMX6QP_DRIVE_STRENGTH, +}; + /* configure MX6SOLO/DUALLITE mmdc DDR io registers */ struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { .dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH, @@ -260,15 +309,87 @@ static void ccgr_init(void) writel(0x00C03F3F, &ccm->CCGR0); writel(0x0030FC03, &ccm->CCGR1); writel(0x0FFFC000, &ccm->CCGR2); - writel(0x3FF00000, &ccm->CCGR3); + writel(0x3FF03000, &ccm->CCGR3); writel(0x00FFF300, &ccm->CCGR4); writel(0x0F0000C3, &ccm->CCGR5); writel(0x000003FF, &ccm->CCGR6); } +static void spl_dram_init_imx6qp_lpddr3(void) +{ + /* MMDC0_MDSCR set the Configuration request bit during MMDC set up */ + writel(0x00008000, MMDC_P0_BASE_ADDR + 0x01c); + /* Calibrations - ZQ */ + writel(0xa1390003, MMDC_P0_BASE_ADDR + 0x800); + /* write leveling */ + writel(0x00060004, MMDC_P0_BASE_ADDR + 0x80c); + writel(0x000B0004, MMDC_P0_BASE_ADDR + 0x810); + writel(0x00000004, MMDC_P1_BASE_ADDR + 0x80c); + writel(0x00000000, MMDC_P1_BASE_ADDR + 0x810); + /* + * DQS gating, read delay, write delay calibration values + * based on calibration compare of 0x00ffff00 + */ + writel(0x03040314, MMDC_P0_BASE_ADDR + 0x83c); + writel(0x03080300, MMDC_P0_BASE_ADDR + 0x840); + writel(0x03000310, MMDC_P1_BASE_ADDR + 0x83c); + writel(0x0268023C, MMDC_P1_BASE_ADDR + 0x840); + writel(0x4034363A, MMDC_P0_BASE_ADDR + 0x848); + writel(0x36302C3C, MMDC_P1_BASE_ADDR + 0x848); + writel(0x3E3E4046, MMDC_P0_BASE_ADDR + 0x850); + writel(0x483A4844, MMDC_P1_BASE_ADDR + 0x850); + writel(0x33333333, MMDC_P0_BASE_ADDR + 0x81c); + writel(0x33333333, MMDC_P0_BASE_ADDR + 0x820); + writel(0x33333333, MMDC_P0_BASE_ADDR + 0x824); + writel(0x33333333, MMDC_P0_BASE_ADDR + 0x828); + writel(0x33333333, MMDC_P1_BASE_ADDR + 0x81c); + writel(0x33333333, MMDC_P1_BASE_ADDR + 0x820); + writel(0x33333333, MMDC_P1_BASE_ADDR + 0x824); + writel(0x33333333, MMDC_P1_BASE_ADDR + 0x828); + writel(0x24912489, MMDC_P0_BASE_ADDR + 0x8c0); + writel(0x24914452, MMDC_P1_BASE_ADDR + 0x8c0); + writel(0x00000800, MMDC_P0_BASE_ADDR + 0x8b8); + writel(0x00000800, MMDC_P1_BASE_ADDR + 0x8b8); + /* MMDC init: in DDR3, 64-bit mode, only MMDC0 is initiated */ + writel(0x00020036, MMDC_P0_BASE_ADDR + 0x004); + writel(0x09444040, MMDC_P0_BASE_ADDR + 0x008); + writel(0x898E79A4, MMDC_P0_BASE_ADDR + 0x00c); + writel(0xDB538F64, MMDC_P0_BASE_ADDR + 0x010); + writel(0x01FF00DD, MMDC_P0_BASE_ADDR + 0x014); + writel(0x00011740, MMDC_P0_BASE_ADDR + 0x018); + writel(0x00008000, MMDC_P0_BASE_ADDR + 0x01c); + writel(0x000026D2, MMDC_P0_BASE_ADDR + 0x02c); + writel(0x008E1023, MMDC_P0_BASE_ADDR + 0x030); + writel(0x00000047, MMDC_P0_BASE_ADDR + 0x040); + writel(0x14420000, MMDC_P0_BASE_ADDR + 0x400); + writel(0x841A0000, MMDC_P0_BASE_ADDR + 0x000); + writel(0x00400c58, MMDC_P0_BASE_ADDR + 0x890); + /* add NOC DDR configuration */ + writel(0x00000000, NOC_DDR_BASE_ADDR + 0x008); + writel(0x2871C39B, NOC_DDR_BASE_ADDR + 0x00c); + writel(0x000005B4, NOC_DDR_BASE_ADDR + 0x038); + writel(0x00000040, NOC_DDR_BASE_ADDR + 0x014); + writel(0x00000020, NOC_DDR_BASE_ADDR + 0x028); + writel(0x00000020, NOC_DDR_BASE_ADDR + 0x02c); + writel(0x02088032, MMDC_P0_BASE_ADDR + 0x01c); + writel(0x00008033, MMDC_P0_BASE_ADDR + 0x01c); + writel(0x00048031, MMDC_P0_BASE_ADDR + 0x01c); + writel(0x19308030, MMDC_P0_BASE_ADDR + 0x01c); + writel(0x04008040, MMDC_P0_BASE_ADDR + 0x01c); + writel(0x00007800, MMDC_P0_BASE_ADDR + 0x020); + writel(0x00022227, MMDC_P0_BASE_ADDR + 0x818); + writel(0x00022227, MMDC_P1_BASE_ADDR + 0x818); + writel(0x00025576, MMDC_P0_BASE_ADDR + 0x004); + writel(0x00011006, MMDC_P0_BASE_ADDR + 0x404); + writel(0x00000000, MMDC_P0_BASE_ADDR + 0x01c); +} + static void spl_dram_init(void) { - if (is_cpu_type(MXC_CPU_MX6SOLO)) { + if (is_mx6dqp()) { + mx6dq_dram_iocfg(64, &mx6qp_ddr_ioregs, &mx6qp_grp_ioregs); + spl_dram_init_imx6qp_lpddr3(); + } else if (is_cpu_type(MXC_CPU_MX6SOLO)) { mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs); mx6_dram_cfg(&mem_s, &mx6s_512m_mmdc_calib, &h5tq2g63dfr); } else if (is_cpu_type(MXC_CPU_MX6DL)) { diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 6d2609c..051560f 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -512,7 +512,9 @@ int board_late_init(void) #endif #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - if (is_mx6dq()) + if (is_mx6dqp()) + env_set("board_rev", "MX6QP"); + else if (is_mx6dq()) env_set("board_rev", "MX6Q"); else env_set("board_rev", "MX6DL"); @@ -534,7 +536,7 @@ int board_init(void) #if defined(CONFIG_VIDEO_IPUV3) setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info); - if (is_mx6dq()) { + if (is_mx6dq() || is_mx6dqp()) { setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c2_pad_info); setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c3_pad_info); } else { diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index ba88d02..8fdfc02 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -109,6 +109,8 @@ "fi; " \ "fi\0" \ "findfdt="\ + "if test $board_name = D1 && test $board_rev = MX6QP ; then " \ + "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \ "if test $board_name = D1 && test $board_rev = MX6Q ; then " \ "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \ "if test $board_name = D1 && test $board_rev = MX6DL ; then " \ |