diff options
-rw-r--r-- | drivers/net/bcm6368-eth.c | 109 |
1 files changed, 62 insertions, 47 deletions
diff --git a/drivers/net/bcm6368-eth.c b/drivers/net/bcm6368-eth.c index a31efba..110985e 100644 --- a/drivers/net/bcm6368-eth.c +++ b/drivers/net/bcm6368-eth.c @@ -309,6 +309,43 @@ static int bcm6368_eth_start(struct udevice *dev) struct bcm6368_eth_priv *priv = dev_get_priv(dev); uint8_t i; + /* disable all ports */ + for (i = 0; i < priv->num_ports; i++) { + setbits_8(priv->base + ETH_PORTOV_REG(i), + ETH_PORTOV_ENABLE_MASK); + setbits_8(priv->base + ETH_PTCTRL_REG(i), + ETH_PTCTRL_RXDIS_MASK | ETH_PTCTRL_TXDIS_MASK); + priv->sw_port_link[i] = 0; + } + + /* enable external ports */ + for (i = ETH_RGMII_PORT0; i < priv->num_ports; i++) { + u8 rgmii_ctrl = ETH_RGMII_CTRL_GMII_CLK_EN; + + if (!priv->used_ports[i].used) + continue; + + if (priv->rgmii_override) + rgmii_ctrl |= ETH_RGMII_CTRL_MII_OVERRIDE_EN; + if (priv->rgmii_timing) + rgmii_ctrl |= ETH_RGMII_CTRL_TIMING_SEL_EN; + + setbits_8(priv->base + ETH_RGMII_CTRL_REG(i), rgmii_ctrl); + } + + /* reset mib */ + setbits_8(priv->base + ETH_GMCR_REG, ETH_GMCR_RST_MIB_MASK); + mdelay(1); + clrbits_8(priv->base + ETH_GMCR_REG, ETH_GMCR_RST_MIB_MASK); + mdelay(1); + + /* force CPU port state */ + setbits_8(priv->base + ETH_IMPOV_REG, + ETH_IMPOV_FORCE_MASK | ETH_IMPOV_LINKUP_MASK); + + /* enable switch forward engine */ + setbits_8(priv->base + ETH_SWMODE_REG, ETH_SWMODE_FWD_EN_MASK); + /* prepare rx dma buffers */ for (i = 0; i < ETH_RX_DESC; i++) { int ret = dma_prepare_rcv_buf(&priv->rx_dma, net_rx_packets[i], @@ -368,6 +405,31 @@ static int bcm6368_eth_start(struct udevice *dev) static void bcm6368_eth_stop(struct udevice *dev) { struct bcm6368_eth_priv *priv = dev_get_priv(dev); + uint8_t i; + + /* disable all ports */ + for (i = 0; i < priv->num_ports; i++) { + setbits_8(priv->base + ETH_PORTOV_REG(i), + ETH_PORTOV_ENABLE_MASK); + setbits_8(priv->base + ETH_PTCTRL_REG(i), + ETH_PTCTRL_RXDIS_MASK | ETH_PTCTRL_TXDIS_MASK); + } + + /* disable external ports */ + for (i = ETH_RGMII_PORT0; i < priv->num_ports; i++) { + if (!priv->used_ports[i].used) + continue; + + clrbits_8(priv->base + ETH_RGMII_CTRL_REG(i), + ETH_RGMII_CTRL_GMII_CLK_EN); + } + + /* disable CPU port */ + clrbits_8(priv->base + ETH_IMPOV_REG, + ETH_IMPOV_FORCE_MASK | ETH_IMPOV_LINKUP_MASK); + + /* disable switch forward engine */ + clrbits_8(priv->base + ETH_SWMODE_REG, ETH_SWMODE_FWD_EN_MASK); /* disable dma rx channel */ dma_disable(&priv->rx_dma); @@ -444,7 +506,6 @@ static int bcm6368_eth_probe(struct udevice *dev) struct eth_pdata *pdata = dev_get_platdata(dev); struct bcm6368_eth_priv *priv = dev_get_priv(dev); int num_ports, ret, i; - uint32_t val; ofnode node; /* get base address */ @@ -561,52 +622,6 @@ static int bcm6368_eth_probe(struct udevice *dev) if (ret) return ret; - /* disable all ports */ - for (i = 0; i < priv->num_ports; i++) { - writeb_be(ETH_PORTOV_ENABLE_MASK, - priv->base + ETH_PORTOV_REG(i)); - writeb_be(ETH_PTCTRL_RXDIS_MASK | - ETH_PTCTRL_TXDIS_MASK, - priv->base + ETH_PTCTRL_REG(i)); - - priv->sw_port_link[i] = 0; - } - - /* enable external ports */ - for (i = ETH_RGMII_PORT0; i < priv->num_ports; i++) { - u8 rgmii_ctrl; - - if (!priv->used_ports[i].used) - continue; - - rgmii_ctrl = readb_be(priv->base + ETH_RGMII_CTRL_REG(i)); - rgmii_ctrl |= ETH_RGMII_CTRL_GMII_CLK_EN; - if (priv->rgmii_override) - rgmii_ctrl |= ETH_RGMII_CTRL_MII_OVERRIDE_EN; - if (priv->rgmii_timing) - rgmii_ctrl |= ETH_RGMII_CTRL_TIMING_SEL_EN; - writeb_be(rgmii_ctrl, priv->base + ETH_RGMII_CTRL_REG(i)); - } - - /* reset mib */ - val = readb_be(priv->base + ETH_GMCR_REG); - val |= ETH_GMCR_RST_MIB_MASK; - writeb_be(val, priv->base + ETH_GMCR_REG); - mdelay(1); - val &= ~ETH_GMCR_RST_MIB_MASK; - writeb_be(val, priv->base + ETH_GMCR_REG); - mdelay(1); - - /* force CPU port state */ - val = readb_be(priv->base + ETH_IMPOV_REG); - val |= ETH_IMPOV_FORCE_MASK | ETH_IMPOV_LINKUP_MASK; - writeb_be(val, priv->base + ETH_IMPOV_REG); - - /* enable switch forward engine */ - val = readb_be(priv->base + ETH_SWMODE_REG); - val |= ETH_SWMODE_FWD_EN_MASK; - writeb_be(val, priv->base + ETH_SWMODE_REG); - /* enable jumbo on all ports */ writel_be(0x1ff, priv->base + ETH_JMBCTL_PORT_REG); writew_be(9728, priv->base + ETH_JMBCTL_MAXSIZE_REG); |