diff options
| -rw-r--r-- | arch/powerpc/include/asm/processor.h | 12 | ||||
| -rw-r--r-- | board/hidden_dragon/Makefile | 8 | ||||
| -rw-r--r-- | board/hidden_dragon/README | 60 | ||||
| -rw-r--r-- | board/hidden_dragon/flash.c | 559 | ||||
| -rw-r--r-- | board/hidden_dragon/hidden_dragon.c | 85 | ||||
| -rw-r--r-- | boards.cfg | 1 | ||||
| -rw-r--r-- | doc/README.scrapyard | 1 | ||||
| -rw-r--r-- | include/configs/HIDDEN_DRAGON.h | 371 |
8 files changed, 1 insertions, 1096 deletions
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index edd7375..a5e7a61 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1346,26 +1346,14 @@ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); #if defined(CONFIG_8xx) #define _machine _MACH_8xx #define have_of 0 -#elif defined(CONFIG_OAK) -#define _machine _MACH_oak -#define have_of 0 #elif defined(CONFIG_WALNUT) #define _machine _MACH_walnut #define have_of 0 -#elif defined(CONFIG_APUS) -#define _machine _MACH_apus -#define have_of 0 -#elif defined(CONFIG_GEMINI) -#define _machine _MACH_gemini -#define have_of 0 #elif defined(CONFIG_MPC8260) #define _machine _MACH_8260 #define have_of 0 #elif defined(CONFIG_SANDPOINT) #define _machine _MACH_sandpoint -#elif defined(CONFIG_HIDDEN_DRAGON) -#define _machine _MACH_hidden_dragon -#define have_of 0 #else #error "Machine not defined correctly" #endif diff --git a/board/hidden_dragon/Makefile b/board/hidden_dragon/Makefile deleted file mode 100644 index eb1c5fd..0000000 --- a/board/hidden_dragon/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = hidden_dragon.o flash.o diff --git a/board/hidden_dragon/README b/board/hidden_dragon/README deleted file mode 100644 index 529fe2b..0000000 --- a/board/hidden_dragon/README +++ /dev/null @@ -1,60 +0,0 @@ -U-Boot for Hidden Dragon board ------------------------------- - -Hidden Dragon is a MPC824x-based board by Motorola. For the most -part it is similar to Sandpoint8245 board. So unless otherwise -mentioned, the codes in this directory are adapted from ../sandpoint -directory. - -Apparently there are very few of this board out there. Even Motorola -website does not have any info on it. - -RAM: - start = 0x0000 0000 - size = 0x0200 0000 (32 MB) - -Flash: - BANK ONE: - start = 0xFFE0 0000 - size = 0x0020 0000 (2 MB) - flash chip = 29LV160TE (1x16 Mbits or 2x8 Mbits) - flash sectors = 16K, 2x8K, 32K, 31x64K - - BANK TWO: - NONE - -The processor interrupt vectors reside on the first 256 bytes -starting from address 0xFFF00000. The "reset vector" (first -instruction executed after reset) is located on 0xFFF0 0100. - -U-Boot is configured to reside in flash starting at the address of -0xFFF00000. The environment space is located in flash separately from -U-Boot, at the second sector of the first flash bank, starting from -0xFFE04000 until 0xFFE06000 (8KB). - -Network: - - RTL8139 chip on the base board (SUPPORTED) - - RTL8129 chip on the processor board (NOT SUPPORTED) - -Serial: - - Two NS16550 compatible UART on the processor board (SUPPORTED) - - One NS16550 compatible UART on the base board (UNTESTED) - -Misc: - VIA686A PCI SuperIO peripheral controller - - 2 USB ports (UNTESTED) - - 2 PS2 ports (UNTESTED) - - Parallel port (UNTESTED) - - IDE & floppy interface (UNTESTED) - - S3 Savage4 video card (UNTESTED) - -TODO: ------ -- Support for the VIA686A based peripherals -- The RTL8139 driver frequently gives rx error. -- Support for RTL8129 network controller. (Why is the support removed from - rtl8139.c driver?) - -(C) Copyright 2004 -Yusdi Santoso, Adaptec Inc., yusdi_santoso@adaptec.com diff --git a/board/hidden_dragon/flash.c b/board/hidden_dragon/flash.c deleted file mode 100644 index fc91a03..0000000 --- a/board/hidden_dragon/flash.c +++ /dev/null @@ -1,559 +0,0 @@ -/* - * (C) Copyright 2004 - * Yusdi Santoso, Adaptec Inc., yusdi_santoso@adaptec.com - * - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc824x.h> -#include <asm/processor.h> -#include <asm/pci_io.h> -#include <w83c553f.h> - -#define ROM_CS0_START 0xFF800000 -#define ROM_CS1_START 0xFF000000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*----------------------------------------------------------------------- - * Functions - */ -static int write_word (flash_info_t *info, ulong dest, ulong data); - -/*flash command address offsets*/ - -#define ADDR0 (0xAAA) -#define ADDR1 (0x555) -#define ADDR3 (0x001) - -#define FLASH_WORD_SIZE unsigned char - -/*----------------------------------------------------------------------- - */ - -static unsigned long flash_id (unsigned char mfct, unsigned char chip) - __attribute__ ((const)); - -typedef struct { - FLASH_WORD_SIZE extval; - unsigned short intval; -} map_entry; - -static unsigned long flash_id (unsigned char mfct, unsigned char chip) -{ - static const map_entry mfct_map[] = { - {(FLASH_WORD_SIZE) AMD_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)}, - {(FLASH_WORD_SIZE) FUJ_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)}, - {(FLASH_WORD_SIZE) STM_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)}, - {(FLASH_WORD_SIZE) MT_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)}, - {(FLASH_WORD_SIZE) INTEL_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}, - {(FLASH_WORD_SIZE) INTEL_ALT_MANU, - (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)} - }; - - static const map_entry chip_map[] = { - {AMD_ID_F040B, FLASH_AM040}, - {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB} - }; - - const map_entry *p; - unsigned long result = FLASH_UNKNOWN; - - /* find chip id */ - for (p = &chip_map[0]; - p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++) - if (p->extval == chip) { - result = FLASH_VENDMASK | p->intval; - break; - } - - /* find vendor id */ - for (p = &mfct_map[0]; - p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++) - if (p->extval == mfct) { - result &= ~FLASH_VENDMASK; - result |= (unsigned long) p->intval << 16; - break; - } - - return result; -} - -unsigned long flash_init (void) -{ - unsigned long i; - unsigned char j; - static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - flash_info_t *const pflinfo = &flash_info[i]; - - pflinfo->flash_id = FLASH_UNKNOWN; - pflinfo->size = 0; - pflinfo->sector_count = 0; - } - - /* Enable writes to Hidden Dragon flash */ - { - register unsigned char temp; - - CONFIG_READ_BYTE (CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, - temp); - temp &= ~0x20; /* clear BIOSWP bit */ - CONFIG_WRITE_BYTE (CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, - temp); - } - - for (i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++) { - flash_info_t *const pflinfo = &flash_info[i]; - const unsigned long base_address = flash_banks[i]; - volatile FLASH_WORD_SIZE *const flash = - (FLASH_WORD_SIZE *) base_address; - - flash[0xAAA << (3 * i)] = 0xaa; - flash[0x555 << (3 * i)] = 0x55; - flash[0xAAA << (3 * i)] = 0x90; - __asm__ __volatile__ ("sync"); - - pflinfo->flash_id = - flash_id (flash[0x0], flash[0x2 + 14 * i]); - - switch (pflinfo->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - pflinfo->size = 0x00080000; - pflinfo->sector_count = 8; - for (j = 0; j < 8; j++) { - pflinfo->start[j] = - base_address + 0x00010000 * j; - pflinfo->protect[j] = flash[(j << 16) | 0x2]; - } - break; - case FLASH_STM800AB: - pflinfo->size = 0x00100000; - pflinfo->sector_count = 19; - pflinfo->start[0] = base_address; - pflinfo->start[1] = base_address + 0x4000; - pflinfo->start[2] = base_address + 0x6000; - pflinfo->start[3] = base_address + 0x8000; - for (j = 1; j < 16; j++) { - pflinfo->start[j + 3] = - base_address + 0x00010000 * j; - } - break; - default: - /* The chip used is not listed in flash_id - TODO: Change this to explicitly detect the flash type - */ - { - int sector_addr = base_address; - - pflinfo->size = 0x00200000; - pflinfo->sector_count = 35; - pflinfo->start[0] = sector_addr; - sector_addr += 0x4000; /* 16K */ - pflinfo->start[1] = sector_addr; - sector_addr += 0x2000; /* 8K */ - pflinfo->start[2] = sector_addr; - sector_addr += 0x2000; /* 8K */ - pflinfo->start[3] = sector_addr; - sector_addr += 0x8000; /* 32K */ - - for (j = 4; j < 35; j++) { - pflinfo->start[j] = sector_addr; - sector_addr += 0x10000; /* 64K */ - } - } - break; - } - /* Protect monitor and environment sectors - */ -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[0]); -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); -#endif - - /* reset device to read mode */ - flash[0x0000] = 0xf0; - __asm__ __volatile__ ("sync"); - } - - /* only have 1 bank */ - return flash_info[0].size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - static const char unk[] = "Unknown"; - const char *mfct = unk, *type = unk; - unsigned int i; - - if (info->flash_id != FLASH_UNKNOWN) { - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - mfct = "AMD"; - break; - case FLASH_MAN_FUJ: - mfct = "FUJITSU"; - break; - case FLASH_MAN_STM: - mfct = "STM"; - break; - case FLASH_MAN_SST: - mfct = "SST"; - break; - case FLASH_MAN_BM: - mfct = "Bright Microelectonics"; - break; - case FLASH_MAN_INTEL: - mfct = "Intel"; - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - type = "AM29F040B (512K * 8, uniform sector size)"; - break; - case FLASH_AM400B: - type = "AM29LV400B (4 Mbit, bottom boot sect)"; - break; - case FLASH_AM400T: - type = "AM29LV400T (4 Mbit, top boot sector)"; - break; - case FLASH_AM800B: - type = "AM29LV800B (8 Mbit, bottom boot sect)"; - break; - case FLASH_AM800T: - type = "AM29LV800T (8 Mbit, top boot sector)"; - break; - case FLASH_AM160T: - type = "AM29LV160T (16 Mbit, top boot sector)"; - break; - case FLASH_AM320B: - type = "AM29LV320B (32 Mbit, bottom boot sect)"; - break; - case FLASH_AM320T: - type = "AM29LV320T (32 Mbit, top boot sector)"; - break; - case FLASH_STM800AB: - type = "M29W800AB (8 Mbit, bottom boot sect)"; - break; - case FLASH_SST800A: - type = "SST39LF/VF800 (8 Mbit, uniform sector size)"; - break; - case FLASH_SST160A: - type = "SST39LF/VF160 (16 Mbit, uniform sector size)"; - break; - } - } - - printf ("\n Brand: %s Type: %s\n" - " Size: %lu KB in %d Sectors\n", - mfct, type, info->size >> 10, info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i = 0; i < info->sector_count; i++) { - unsigned long size; - unsigned int erased; - unsigned long *flash = (unsigned long *) info->start[i]; - - /* - * Check if whole sector is erased - */ - size = (i != (info->sector_count - 1)) ? - (info->start[i + 1] - info->start[i]) >> 2 : - (info->start[0] + info->size - info->start[i]) >> 2; - - for (flash = (unsigned long *) info->start[i], erased = 1; - (flash != (unsigned long *) info->start[i] + size) - && erased; flash++) - erased = *flash == ~0x0UL; - - printf ("%s %08lX %s %s", - (i % 5) ? "" : "\n ", - info->start[i], - erased ? "E" : " ", info->protect[i] ? "RO" : " "); - } - - puts ("\n"); - return; -} - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - unsigned char sh8b; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Check the ROM CS */ - if ((info->start[0] >= ROM_CS1_START) - && (info->start[0] < ROM_CS0_START)) - sh8b = 3; - else - sh8b = 0; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080; - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (FLASH_WORD_SIZE *) (info->start[0] + - ((info->start[sect] - - info->start[0]) << sh8b)); - if (info->flash_id & FLASH_MAN_SST) { - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = - (FLASH_WORD_SIZE) 0x00550055; - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00800080; - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = - (FLASH_WORD_SIZE) 0x00550055; - addr[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */ - udelay (30000); /* wait 30 ms */ - } else - addr[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */ - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->start[l_sect] - - info-> - start[0]) << sh8b)); - while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != - (FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - addr = (FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_word (info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) info->start[0]; - volatile FLASH_WORD_SIZE *dest2; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; - ulong start; - int flag; - int i; - unsigned char sh8b; - - /* Check the ROM CS */ - if ((info->start[0] >= ROM_CS1_START) - && (info->start[0] < ROM_CS0_START)) - sh8b = 3; - else - sh8b = 0; - - dest2 = (FLASH_WORD_SIZE *) (((dest - info->start[0]) << sh8b) + - info->start[0]); - - /* Check if Flash is (sufficiently) erased */ - if ((*dest2 & (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { - addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i << sh8b] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} diff --git a/board/hidden_dragon/hidden_dragon.c b/board/hidden_dragon/hidden_dragon.c deleted file mode 100644 index 8d47f37..0000000 --- a/board/hidden_dragon/hidden_dragon.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2004 - * Yusdi Santoso, Adaptec Inc., yusdi_santoso@adaptec.com - * - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc824x.h> -#include <pci.h> -#include <netdev.h> - -int checkboard (void) -{ - /*TODO: Check processor type */ - - puts ( "Board: Hidden Dragon " -#ifdef CONFIG_MPC8240 - "8240" -#endif -#ifdef CONFIG_MPC8245 - "8245" -#endif - " ##Test not implemented yet##\n"); - /* TODO: Implement board test */ - return 0; -} - -phys_size_t initdram (int board_type) -{ - long size; - long new_bank0_end; - long mear1; - long emear1; - - size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE); - - new_bank0_end = size - 1; - mear1 = mpc824x_mpc107_getreg(MEAR1); - emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - return (size); -} - -/* - * Initialize PCI Devices, report devices found. - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_hidden_dragon_config_table[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID, - pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID, - pci_cfgfunc_config_device, { PCI_ENET1_IOADDR, - PCI_ENET1_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, - { } -}; -#endif - -struct pci_controller hose = { -#ifndef CONFIG_PCI_PNP - config_table: pci_hidden_dragon_config_table, -#endif -}; - -void pci_init_board(void) -{ - pci_mpc824x_init(&hose); -} - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} @@ -1239,7 +1239,6 @@ Orphan blackfin blackfin - - - Orphan blackfin blackfin - - - tcm-bf537 - Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> Orphan powerpc mpc5xxx - matrix_vision mvbc_p MVBC_P MVBC_P:MVBC_P Andre Schwarz <andre.schwarz@matrix-vision.de> Orphan powerpc mpc5xxx - matrix_vision mvsmr MVSMR - Andre Schwarz <andre.schwarz@matrix-vision.de> -Orphan powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso <yusdi_santoso@adaptec.com> Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK - Anton Vorontsov <avorontsov@ru.mvista.com> Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK_33 MPC8360ERDK:CLKIN_33MHZ Anton Vorontsov <avorontsov@ru.mvista.com> Orphan powerpc mpc83xx - matrix_vision mergerbox MERGERBOX - Andre Schwarz <andre.schwarz@matrix-vision.de> diff --git a/doc/README.scrapyard b/doc/README.scrapyard index cbc373b..e2157e0 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +hidden_dragon powerpc mpc824x - - Yusdi Santoso <yusdi_santoso@adaptec.com> debris powerpc mpc824x - - Sangmoon Kim <dogoil@etinsys.com> kvme080 powerpc mpc824x - - Sangmoon Kim <dogoil@etinsys.com> ep8248 powerpc mpc8260 - - Yuli Barcohen <yuli@arabellasw.com> diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h deleted file mode 100644 index e0a233b..0000000 --- a/include/configs/HIDDEN_DRAGON.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - * (C) Copyright 2004 - * Yusdi Santoso, Adaptec Inc., yusdi_santoso@adaptec.com - * - * (C) Copyright 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_HIDDEN_DRAGON 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#if 0 -#define USE_DINK32 1 -#else -#undef USE_DINK32 -#endif - -#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */ -#define CONFIG_BAUDRATE 9600 -#define CONFIG_DRAM_SPEED 100 /* MHz */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP - - -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET0_MEMADDR 0x80000000 -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET1_MEMADDR 0x81000000 - -#define CONFIG_RTL8139 - -/* Make sure the ethaddr can be overwritten - TODO: Remove this on final product -*/ -#define CONFIG_ENV_OVERWRITE - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x02000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#if defined (USE_DINK32) -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE 0x00090000 -#define CONFIG_SYS_RAMBOOT 1 -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#endif - -#define CONFIG_SYS_FLASH_BASE 0xFFE00000 -#define CONFIG_SYS_FLASH_SIZE (2 * 1024 * 1024) /* Unity has onboard 1MByte flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */ - -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_ISA_MEM 0xFD000000 -#define CONFIG_SYS_ISA_IO 0xFE000000 - -#define CONFIG_SYS_FLASH_RANGE_BASE 0xFFE00000 /* flash memory address range */ -#define CONFIG_SYS_FLASH_RANGE_SIZE 0x00200000 -#define FLASH_BASE0_PRELIM 0xFFE00000 /* processor board flash */ - -/* - * select i2c support configuration - * - * Supported configurations are {none, software, hardware} drivers. - * If the software driver is chosen, there are some additional - * configuration items that the driver uses to drive the port pins. - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#ifdef CONFIG_SYS_I2C_SOFT -#error "Soft I2C is not configured properly. Please review!" -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SYS_I2C_SOFT */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM } - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - - -/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */ -#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */ -#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */ -#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */ - -#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ - -/* TODO: Change this to VIA686A */ - -/* - * NS87308 Configuration - */ -#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */ - -#define CONFIG_SYS_NS87308_BADDR_10 1 - -#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \ - CONFIG_SYS_NS87308_UART2 | \ - CONFIG_SYS_NS87308_POWRMAN | \ - CONFIG_SYS_NS87308_RTC_APC ) - -#undef CONFIG_SYS_NS87308_PS2MOD - -#define CONFIG_SYS_NS87308_CS0_BASE 0x0076 -#define CONFIG_SYS_NS87308_CS0_CONF 0x30 -#define CONFIG_SYS_NS87308_CS1_BASE 0x0075 -#define CONFIG_SYS_NS87308_CS1_CONF 0x30 -#define CONFIG_SYS_NS87308_CS2_BASE 0x0074 -#define CONFIG_SYS_NS87308_CS2_CONF 0x30 - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#if (CONFIG_CONS_INDEX > 2) -#define CONFIG_SYS_NS16550_CLK CONFIG_DRAM_SPEED*1000000 -#else -#define CONFIG_SYS_NS16550_CLK 1843200 -#endif - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_EUMB_ADDR + 0x4600) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ - -#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */ - -#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */ - -/* the following are for SDRAM only*/ -#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */ -#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 4 /* data latency from read command */ -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#if 0 -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */ -#endif - -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - - -/* memory bank settings*/ -/* - * only bits 20-29 are actually used from these vales to set the - * start/end address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 -/* - * Memory bank enable bitmask, specifying which of the banks defined above - are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in DCACHE @ 1GB (no backing mem) */ -#if defined(USE_DINK32) -#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 ) -#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K ) -#else -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#endif - -/* PCI memory */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 36 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* values according to the manual */ -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ - -#undef NR_8259_INTS -#define NR_8259_INTS 1 - -#define CONFIG_DISK_SPINUP_TIME 1000000 - -#endif /* __CONFIG_H */ |