diff options
| -rw-r--r-- | arch/arm/include/asm/fsl_secure_boot.h | 16 | ||||
| -rw-r--r-- | board/freescale/ls1088a/MAINTAINERS | 5 | ||||
| -rw-r--r-- | configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 44 | ||||
| -rw-r--r-- | include/configs/ls1088a_common.h | 15 |
4 files changed, 71 insertions, 9 deletions
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index ec6463d..3f30470 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -26,6 +26,14 @@ #define CONFIG_KEY_REVOCATION +#if defined(CONFIG_FSL_LAYERSCAPE) +/* + * For fsl layerscape based platforms, ESBC image Address in Header + * is 64 bit. + */ +#define CONFIG_ESBC_ADDR_64BIT +#endif + #ifndef CONFIG_SPL_BUILD #ifndef CONFIG_SYS_RAMBOOT /* The key used for verification of next level images @@ -42,14 +50,6 @@ #endif -#if defined(CONFIG_FSL_LAYERSCAPE) -/* - * For fsl layerscape based platforms, ESBC image Address in Header - * is 64 bit. - */ -#define CONFIG_ESBC_ADDR_64BIT -#endif - #ifdef CONFIG_ARCH_LS2080A #define CONFIG_EXTRA_ENV \ "setenv fdt_high 0xa0000000;" \ diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS index de3961d..371e5db 100644 --- a/board/freescale/ls1088a/MAINTAINERS +++ b/board/freescale/ls1088a/MAINTAINERS @@ -27,3 +27,8 @@ M: Udit Agarwal <udit.agarwal@nxp.com> M: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> S: Maintained F: configs/ls1088ardb_qspi_SECURE_BOOT_defconfig + +LS1088ARDB_SD_SECURE_BOOT BOARD +M: Sumit Garg <sumit.garg@nxp.com> +S: Maintained +F: configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig new file mode 100644 index 0000000..a7466f1 --- /dev/null +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -0,0 +1,44 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1088ARDB=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SECURE_BOOT=y +CONFIG_FSL_LS_PPA=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" +CONFIG_DISTRO_DEFAULTS=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI" +CONFIG_SD_BOOT=y +# CONFIG_USE_BOOTCOMMAND is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 +CONFIG_SPL_CRYPTO_SUPPORT=y +CONFIG_SPL_HASH_SUPPORT=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SCSI_AHCI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_RSA=y +CONFIG_SPL_RSA=y diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 13b5e8b..e684884 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -254,7 +254,20 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) +/* + * HDR would be appended at end of image and copied to DDR along + * with U-Boot image. Here u-boot max. size is 512K. So if binary + * size increases then increase this size in case of secure boot as + * it uses raw u-boot image instead of fit image. + */ +#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) +#else +#define CONFIG_SYS_MONITOR_LEN 0x100000 +#endif /* ifdef CONFIG_SECURE_BOOT */ + #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ |