aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--doc/README.enetaddr6
-rw-r--r--drivers/net/designware.c4
-rw-r--r--drivers/net/fec_mxc.c8
-rw-r--r--drivers/net/fm/eth.c9
-rw-r--r--drivers/net/phy/micrel.c15
-rw-r--r--drivers/net/phy/phy.c5
-rw-r--r--drivers/net/sh_eth.c6
-rw-r--r--drivers/net/tsec.c8
-rw-r--r--drivers/net/xilinx_axi_emac.c6
-rw-r--r--drivers/net/xilinx_ll_temac.c8
-rw-r--r--drivers/usb/eth/asix.c30
-rw-r--r--include/configs/mx6qsabrelite.h1
-rw-r--r--net/eth.c14
-rw-r--r--net/tftp.c2
14 files changed, 96 insertions, 26 deletions
diff --git a/doc/README.enetaddr b/doc/README.enetaddr
index 2d8e24f..1eaeaf9 100644
--- a/doc/README.enetaddr
+++ b/doc/README.enetaddr
@@ -32,7 +32,11 @@ Correct flow of setting up the MAC address (summarized):
1. Read from hardware in initialize() function
2. Read from environment in net/eth.c after initialize()
-3. Give priority to the value in the environment if a conflict
+3. The environment variable will be compared to the driver initialized
+ struct eth_device->enetaddr. If they differ, a warning is printed, and the
+ environment variable will be used unchanged.
+ If the environment variable is not set, it will be initialized from
+ eth_device->enetaddr, and a warning will be printed.
4. Program the address into hardware if the following conditions are met:
a) The relevant driver has a 'write_addr' function
b) The user hasn't set an 'ethmacskip' environment variable
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 326d550..bf21a08 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -171,8 +171,8 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis)
writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
&dma_p->busmode);
- writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
- writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
+ writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD |
+ TXSECONDFRAME, &dma_p->opmode);
conf = FRAMEBURSTENABLE | DISABLERXOWN;
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index eee41d7..5700552 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -510,7 +510,13 @@ static int fec_open(struct eth_device *edev)
fec_eth_phy_config(edev);
if (fec->phydev) {
/* Start up the PHY */
- phy_startup(fec->phydev);
+ int ret = phy_startup(fec->phydev);
+
+ if (ret) {
+ printf("Could not initialize PHY %s\n",
+ fec->phydev->dev->name);
+ return ret;
+ }
speed = fec->phydev->speed;
} else {
speed = _100BASET;
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index f34f4db..2b616ad 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -363,6 +363,9 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd)
{
struct fm_eth *fm_eth;
struct fsl_enet_mac *mac;
+#ifdef CONFIG_PHYLIB
+ int ret;
+#endif
fm_eth = (struct fm_eth *)dev->priv;
mac = fm_eth->mac;
@@ -384,7 +387,11 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd)
fmc_tx_port_graceful_stop_disable(fm_eth);
#ifdef CONFIG_PHYLIB
- phy_startup(fm_eth->phydev);
+ ret = phy_startup(fm_eth->phydev);
+ if (ret) {
+ printf("%s: Could not initialize\n", fm_eth->phydev->dev->name);
+ return ret;
+ }
#else
fm_eth->phydev->speed = SPEED_1000;
fm_eth->phydev->link = 1;
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index e3043df..30f3264 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -35,6 +35,12 @@ static struct phy_driver KSZ804_driver = {
.shutdown = &genphy_shutdown,
};
+#ifndef CONFIG_PHY_MICREL_KSZ9021
+/*
+ * I can't believe Micrel used the exact same part number
+ * for the KSZ9021
+ * Shame Micrel, Shame!!!!!
+ */
static struct phy_driver KS8721_driver = {
.name = "Micrel KS8721BL",
.uid = 0x221610,
@@ -44,7 +50,9 @@ static struct phy_driver KS8721_driver = {
.startup = &genphy_startup,
.shutdown = &genphy_shutdown,
};
+#endif
+#ifdef CONFIG_PHY_MICREL_KSZ9021
/* ksz9021 PHY Registers */
#define MII_KSZ9021_EXTENDED_CTRL 0x0b
#define MII_KSZ9021_EXTENDED_DATAW 0x0c
@@ -127,12 +135,15 @@ static struct phy_driver ksz9021_driver = {
.startup = &ksz9021_startup,
.shutdown = &genphy_shutdown,
};
+#endif
int phy_micrel_init(void)
{
phy_register(&KSZ804_driver);
- phy_register(&KS8721_driver);
+#ifdef CONFIG_PHY_MICREL_KSZ9021
phy_register(&ksz9021_driver);
-
+#else
+ phy_register(&KS8721_driver);
+#endif
return 0;
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 7d327f7..baef60f 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -723,10 +723,13 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
return phydev;
}
+/*
+ * Start the PHY. Returns 0 on success, or a negative error code.
+ */
int phy_startup(struct phy_device *phydev)
{
if (phydev->drv->startup)
- phydev->drv->startup(phydev);
+ return phydev->drv->startup(phydev);
return 0;
}
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index bb57e4d..268d884 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -415,7 +415,11 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
goto err_phy_cfg;
}
phy = port_info->phydev;
- phy_startup(phy);
+ ret = phy_startup(phy);
+ if (ret) {
+ printf(SHETHER_NAME ": phy startup failure\n");
+ return ret;
+ }
val = 0;
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 3c1c8f0..f5e314b 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -480,6 +480,7 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
int i;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
tsec_t *regs = priv->regs;
+ int ret;
/* Make sure the controller is stopped */
tsec_halt(dev);
@@ -511,7 +512,12 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
startup_tsec(dev);
/* Start up the PHY */
- phy_startup(priv->phydev);
+ ret = phy_startup(priv->phydev);
+ if (ret) {
+ printf("Could not initialize PHY %s\n",
+ priv->phydev->dev->name);
+ return ret;
+ }
adjust_link(priv, priv->phydev);
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index 7854a04..d777144 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -272,7 +272,11 @@ static int setup_phy(struct eth_device *dev)
phydev->advertising = phydev->supported;
priv->phydev = phydev;
phy_config(phydev);
- phy_startup(phydev);
+ if (phy_startup(phydev)) {
+ printf("axiemac: could not initialize PHY %s\n",
+ phydev->dev->name);
+ return 0;
+ }
switch (phydev->speed) {
case 1000:
diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c
index 27dafc1..b67153b 100644
--- a/drivers/net/xilinx_ll_temac.c
+++ b/drivers/net/xilinx_ll_temac.c
@@ -232,6 +232,7 @@ static void ll_temac_halt(struct eth_device *dev)
static int ll_temac_init(struct eth_device *dev, bd_t *bis)
{
struct ll_temac *ll_temac = dev->priv;
+ int ret;
printf("%s: Xilinx XPS LocalLink Tri-Mode Ether MAC #%d at 0x%08X.\n",
dev->name, dev->index, dev->iobase);
@@ -240,7 +241,12 @@ static int ll_temac_init(struct eth_device *dev, bd_t *bis)
return -1;
/* Start up the PHY */
- phy_startup(ll_temac->phydev);
+ ret = phy_startup(ll_temac->phydev);
+ if (ret) {
+ printf("%s: Could not initialize PHY %s\n",
+ dev->name, ll_temac->phydev->dev->name);
+ return ret;
+ }
if (!ll_temac_adjust_link(dev)) {
ll_temac_halt(dev);
diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c
index a3bf51a..8fb7fc8 100644
--- a/drivers/usb/eth/asix.c
+++ b/drivers/usb/eth/asix.c
@@ -168,27 +168,28 @@ static inline int asix_set_hw_mii(struct ueth_data *dev)
static int asix_mdio_read(struct ueth_data *dev, int phy_id, int loc)
{
- __le16 res;
+ ALLOC_CACHE_ALIGN_BUFFER(__le16, res, 1);
asix_set_sw_mii(dev);
- asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
+ asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, res);
asix_set_hw_mii(dev);
debug("asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
- phy_id, loc, le16_to_cpu(res));
+ phy_id, loc, le16_to_cpu(*res));
- return le16_to_cpu(res);
+ return le16_to_cpu(*res);
}
static void
asix_mdio_write(struct ueth_data *dev, int phy_id, int loc, int val)
{
- __le16 res = cpu_to_le16(val);
+ ALLOC_CACHE_ALIGN_BUFFER(__le16, res, 1);
+ *res = cpu_to_le16(val);
debug("asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
phy_id, loc, val);
asix_set_sw_mii(dev);
- asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
+ asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, res);
asix_set_hw_mii(dev);
}
@@ -210,7 +211,8 @@ static int asix_sw_reset(struct ueth_data *dev, u8 flags)
static inline int asix_get_phy_addr(struct ueth_data *dev)
{
- u8 buf[2];
+ ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 2);
+
int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
debug("asix_get_phy_addr()\n");
@@ -242,13 +244,14 @@ static int asix_write_medium_mode(struct ueth_data *dev, u16 mode)
static u16 asix_read_rx_ctl(struct ueth_data *dev)
{
- __le16 v;
- int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
+ ALLOC_CACHE_ALIGN_BUFFER(__le16, v, 1);
+
+ int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, v);
if (ret < 0)
debug("Error reading RX_CTL register: %02x\n", ret);
else
- ret = le16_to_cpu(v);
+ ret = le16_to_cpu(*v);
return ret;
}
@@ -313,7 +316,7 @@ static int mii_nway_restart(struct ueth_data *dev)
static int asix_init(struct eth_device *eth, bd_t *bd)
{
int embd_phy;
- unsigned char buf[ETH_ALEN];
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN);
u16 rx_ctl;
struct ueth_data *dev = (struct ueth_data *)eth->priv;
int timeout = 0;
@@ -425,7 +428,8 @@ static int asix_send(struct eth_device *eth, void *packet, int length)
int err;
u32 packet_len;
int actual_len;
- unsigned char msg[PKTSIZE + sizeof(packet_len)];
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
+ PKTSIZE + sizeof(packet_len));
debug("** %s(), len %d\n", __func__, length);
@@ -452,7 +456,7 @@ static int asix_send(struct eth_device *eth, void *packet, int length)
static int asix_recv(struct eth_device *eth)
{
struct ueth_data *dev = (struct ueth_data *)eth->priv;
- static unsigned char recv_buf[AX_RX_URB_SIZE];
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE);
unsigned char *buf_ptr;
int err;
int actual_len;
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index fbd10d6..e42fe6b 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -104,6 +104,7 @@
#define CONFIG_FEC_MXC_PHYADDR 6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
/* USB Configs */
#define CONFIG_CMD_USB
diff --git a/net/eth.c b/net/eth.c
index d526264..1a11ce1 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -62,6 +62,15 @@ int eth_getenv_enetaddr_by_index(const char *base_name, int index,
return eth_getenv_enetaddr(enetvar, enetaddr);
}
+static inline int eth_setenv_enetaddr_by_index(const char *base_name, int index,
+ uchar *enetaddr)
+{
+ char enetvar[32];
+ sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index);
+ return eth_setenv_enetaddr(enetvar, enetaddr);
+}
+
+
static int eth_mac_skip(int index)
{
char enetvar[15];
@@ -205,6 +214,11 @@ int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
}
memcpy(dev->enetaddr, env_enetaddr, 6);
+ } else if (is_valid_ether_addr(dev->enetaddr)) {
+ eth_setenv_enetaddr_by_index(base_name, eth_number,
+ dev->enetaddr);
+ printf("\nWarning: %s using MAC address from net device\n",
+ dev->name);
}
if (dev->write_hwaddr &&
diff --git a/net/tftp.c b/net/tftp.c
index b2e08b4..59a8ebb 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -156,7 +156,7 @@ mcast_cleanup(void)
#endif /* CONFIG_MCAST_TFTP */
static inline void
-store_block(unsigned block, uchar *src, unsigned len)
+store_block(int block, uchar *src, unsigned len)
{
ulong offset = block * TftpBlkSize + TftpBlockWrapOffset;
ulong newsize = offset + len;
generated by cgit v1.1 at 2024-11-11 01:01:06 +0000