aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Kconfig10
-rw-r--r--cmd/bdinfo.c4
-rw-r--r--common/Makefile4
-rw-r--r--common/board_f.c4
-rw-r--r--common/board_r.c2
-rw-r--r--common/dlmalloc.c12
-rw-r--r--common/init/board_init.c8
-rw-r--r--common/spl/spl.c8
-rw-r--r--drivers/core/Kconfig8
-rw-r--r--drivers/serial/serial-uclass.c4
-rw-r--r--include/asm-generic/global_data.h2
-rw-r--r--lib/asm-offsets.c2
-rw-r--r--lib/efi/efi_app.c2
13 files changed, 41 insertions, 29 deletions
diff --git a/Kconfig b/Kconfig
index bb80ada..c1451bc 100644
--- a/Kconfig
+++ b/Kconfig
@@ -95,6 +95,16 @@ config SYS_MALLOC_F_LEN
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
+config SPL_SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool in spl before relocation"
+ depends on SYS_MALLOC_F
+ default SYS_MALLOC_F_LEN
+ help
+ Before relocation, memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 8971697..81ac78d 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -344,9 +344,9 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
#ifdef CONFIG_BOARD_TYPES
printf("Board Type = %ld\n", gd->board_type);
#endif
-#ifdef CONFIG_SYS_MALLOC_F
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
- CONFIG_SYS_MALLOC_F_LEN);
+ CONFIG_VAL(SYS_MALLOC_F_LEN));
#endif
if (gd->fdt_blob)
printf("fdt_blob = %p\n", gd->fdt_blob);
diff --git a/common/Makefile b/common/Makefile
index 17a92ea..60681c8 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -139,9 +139,11 @@ obj-y += console.o
endif
obj-$(CONFIG_CROS_EC) += cros_ec.o
obj-y += dlmalloc.o
-ifdef CONFIG_SYS_MALLOC_F_LEN
+ifdef CONFIG_SYS_MALLOC_F
+ifneq ($(CONFIG_$(SPL_)SYS_MALLOC_F_LEN),0)
obj-y += malloc_simple.o
endif
+endif
obj-y += image.o
obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o
obj-$(CONFIG_$(SPL_)OF_LIBFDT) += image-fdt.o
diff --git a/common/board_f.c b/common/board_f.c
index 49c8bc8..19b8055 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -727,7 +727,7 @@ static int initf_bootstage(void)
static int initf_console_record(void)
{
-#if defined(CONFIG_CONSOLE_RECORD) && defined(CONFIG_SYS_MALLOC_F_LEN)
+#if defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN)
return console_record_init();
#else
return 0;
@@ -736,7 +736,7 @@ static int initf_console_record(void)
static int initf_dm(void)
{
-#if defined(CONFIG_DM) && defined(CONFIG_SYS_MALLOC_F_LEN)
+#if defined(CONFIG_DM) && CONFIG_VAL(SYS_MALLOC_F_LEN)
int ret;
bootstage_start(BOOTSTATE_ID_ACCUM_DM_F, "dm_f");
diff --git a/common/board_r.c b/common/board_r.c
index ecca1ed..985aa95 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -256,7 +256,7 @@ static int initr_malloc(void)
{
ulong malloc_start;
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
gd->malloc_ptr / 1024);
#endif
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index fc1e8b3..c37979b 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -1254,7 +1254,7 @@ Void_t* mALLOc(bytes) size_t bytes;
INTERNAL_SIZE_T nb;
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT))
return malloc_simple(bytes);
#endif
@@ -1522,7 +1522,7 @@ void fREe(mem) Void_t* mem;
mchunkptr fwd; /* misc temp for linking */
int islr; /* track whether merging with last_remainder */
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
/* free() is a no-op - all the memory will be freed on relocation */
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT))
return;
@@ -1679,7 +1679,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes;
/* realloc of null is supposed to be same as malloc */
if (oldmem == NULL) return mALLOc(bytes);
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
/* This is harder to support and should not be needed */
panic("pre-reloc realloc() is not supported");
@@ -2074,7 +2074,7 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size;
return NULL;
else
{
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
MALLOC_ZERO(mem, sz);
return mem;
@@ -2375,9 +2375,9 @@ int mALLOPt(param_number, value) int param_number; int value;
int initf_malloc(void)
{
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
assert(gd->malloc_base); /* Set up by crt0.S */
- gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
+ gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN);
gd->malloc_ptr = 0;
#endif
diff --git a/common/init/board_init.c b/common/init/board_init.c
index bf4255b..4a391be 100644
--- a/common/init/board_init.c
+++ b/common/init/board_init.c
@@ -46,8 +46,8 @@ __weak void arch_setup_gd(struct global_data *gd_ptr)
ulong board_init_f_alloc_reserve(ulong top)
{
/* Reserve early malloc arena */
-#if defined(CONFIG_SYS_MALLOC_F)
- top -= CONFIG_SYS_MALLOC_F_LEN;
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+ top -= CONFIG_VAL(SYS_MALLOC_F_LEN);
#endif
/* LAST : reserve GD (rounded up to a multiple of 16 bytes) */
top = rounddown(top-sizeof(struct global_data), 16);
@@ -121,11 +121,11 @@ void board_init_f_init_reserve(ulong base)
* Use gd as it is now properly set for all architectures.
*/
-#if defined(CONFIG_SYS_MALLOC_F)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
/* go down one 'early malloc arena' */
gd->malloc_base = base;
/* next alloc will be higher by one 'early malloc arena' size */
- base += CONFIG_SYS_MALLOC_F_LEN;
+ base += CONFIG_VAL(SYS_MALLOC_F_LEN);
#endif
}
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 7f3fd92..c56cc6f 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -220,12 +220,12 @@ static int spl_common_init(bool setup_malloc)
debug("spl_early_init()\n");
-#if defined(CONFIG_SYS_MALLOC_F_LEN)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (setup_malloc) {
#ifdef CONFIG_MALLOC_F_ADDR
gd->malloc_base = CONFIG_MALLOC_F_ADDR;
#endif
- gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
+ gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN);
gd->malloc_ptr = 0;
}
#endif
@@ -419,7 +419,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
default:
debug("Unsupported OS image.. Jumping nevertheless..\n");
}
-#if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
gd->malloc_ptr / 1024);
#endif
@@ -486,7 +486,7 @@ ulong spl_relocate_stack_gd(void)
gd_t *new_gd;
ulong ptr = CONFIG_SPL_STACK_R_ADDR;
-#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
+#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_SPL_SYS_MALLOC_F_LEN
if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) {
ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN;
gd->malloc_base = ptr;
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index fb5c4e8..f8b19a4 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -16,10 +16,10 @@ config SPL_DM
suitable malloc() implementation. If you are not using the
full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
- must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
+ must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size.
In most cases driver model will only allocate a few uclasses
and devices in SPL, so 1KB should be enable. See
- CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
+ CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it.
config TPL_DM
bool "Enable Driver Model for TPL"
@@ -29,10 +29,10 @@ config TPL_DM
suitable malloc() implementation. If you are not using the
full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
- must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
+ must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size.
In most cases driver model will only allocate a few uclasses
and devices in SPL, so 1KB should be enough. See
- CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
+ CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it.
Disable this for very small implementations.
config DM_WARN
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index f360534..9cae9fb 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -23,8 +23,8 @@ DECLARE_GLOBAL_DATA_PTR;
*/
static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
-#ifndef CONFIG_SYS_MALLOC_F_LEN
-#error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work"
+#if !CONFIG_VAL(SYS_MALLOC_F_LEN)
+#error "Serial is required before relocation - define CONFIG_$(SPL_)SYS_MALLOC_F_LEN to make this work"
#endif
static int serial_check_stdout(const void *blob, struct udevice **devp)
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index fb90be9..86bf656 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -88,7 +88,7 @@ typedef struct global_data {
#endif
unsigned int timebase_h;
unsigned int timebase_l;
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
unsigned long malloc_base; /* base address of early malloc() */
unsigned long malloc_limit; /* limit address */
unsigned long malloc_ptr; /* current address */
diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c
index 221ebbf..b04f7c6 100644
--- a/lib/asm-offsets.c
+++ b/lib/asm-offsets.c
@@ -28,7 +28,7 @@ int main(void)
DEFINE(GD_SIZE, sizeof(struct global_data));
DEFINE(GD_BD, offsetof(struct global_data, bd));
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base));
#endif
diff --git a/lib/efi/efi_app.c b/lib/efi/efi_app.c
index 452ab5d..f1afd9c 100644
--- a/lib/efi/efi_app.c
+++ b/lib/efi/efi_app.c
@@ -48,7 +48,7 @@ static efi_status_t setup_memory(struct efi_priv *priv)
return ret;
memset(gd, '\0', sizeof(*gd));
- gd->malloc_base = (ulong)efi_malloc(priv, CONFIG_SYS_MALLOC_F_LEN,
+ gd->malloc_base = (ulong)efi_malloc(priv, CONFIG_VAL(SYS_MALLOC_F_LEN),
&ret);
if (!gd->malloc_base)
return ret;