diff options
| -rw-r--r-- | README | 13 | ||||
| -rw-r--r-- | board/freescale/common/Makefile | 2 | ||||
| -rw-r--r-- | board/freescale/common/diu_ch7301.c | 217 | ||||
| -rw-r--r-- | board/freescale/common/diu_ch7301.h | 12 | ||||
| -rw-r--r-- | board/freescale/t104xrdb/Makefile | 1 | ||||
| -rw-r--r-- | board/freescale/t104xrdb/diu.c | 83 | ||||
| -rw-r--r-- | drivers/video/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/fsl_diu_fb.c | 415 | ||||
| -rw-r--r-- | include/configs/T102xRDB.h | 11 | ||||
| -rw-r--r-- | include/configs/T104xRDB.h | 19 | ||||
| -rw-r--r-- | include/fsl_diu_fb.h | 14 | ||||
| -rw-r--r-- | scripts/config_whitelist.txt | 3 |
12 files changed, 0 insertions, 791 deletions
@@ -970,19 +970,6 @@ The following options need to be configured: - Keyboard Support: See Kconfig help for available keyboard drivers. -- Video support: - CONFIG_FSL_DIU_FB - Enable the Freescale DIU video driver. Reference boards for - SOCs that have a DIU should define this macro to enable DIU - support, and should also define these other macros: - - CONFIG_SYS_DIU_ADDR - - The DIU driver will look for the 'video-mode' environment - variable, and if defined, enable the DIU as a console during - boot. See the documentation file doc/README.video for a - description of this variable. - - LCD Support: CONFIG_LCD Define this to enable LCD support (for output to LCD diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index c8f62bf..f13965d 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -44,8 +44,6 @@ ifndef CONFIG_RAMBOOT_PBL obj-$(CONFIG_FSL_FIXED_MMC_LOCATION) += sdhc_boot.o endif -obj-$(CONFIG_FSL_DIU_CH7301) += diu_ch7301.o - ifdef CONFIG_ARM obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o else diff --git a/board/freescale/common/diu_ch7301.c b/board/freescale/common/diu_ch7301.c deleted file mode 100644 index 05e6a3a..0000000 --- a/board/freescale/common/diu_ch7301.c +++ /dev/null @@ -1,217 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * Copyright 2019 NXP - * Authors: Priyanka Jain <Priyanka.Jain@freescale.com> - * Wang Dongsheng <dongsheng.wang@freescale.com> - * - * This file is copied and modified from the original t1040qds/diu.c. - * Encoder can be used in T104x and LSx Platform. - */ - -#include <common.h> -#include <stdio_dev.h> -#include <i2c.h> -#include <linux/delay.h> - -#define I2C_DVI_INPUT_DATA_FORMAT_REG 0x1F -#define I2C_DVI_PLL_CHARGE_CNTL_REG 0x33 -#define I2C_DVI_PLL_DIVIDER_REG 0x34 -#define I2C_DVI_PLL_SUPPLY_CNTL_REG 0x35 -#define I2C_DVI_PLL_FILTER_REG 0x36 -#define I2C_DVI_TEST_PATTERN_REG 0x48 -#define I2C_DVI_POWER_MGMT_REG 0x49 -#define I2C_DVI_LOCK_STATE_REG 0x4D -#define I2C_DVI_SYNC_POLARITY_REG 0x56 - -/* - * Set VSYNC/HSYNC to active high. This is polarity of sync signals - * from DIU->DVI. The DIU default is active igh, so DVI is set to - * active high. - */ -#define I2C_DVI_INPUT_DATA_FORMAT_VAL 0x98 - -#define I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL 0x06 -#define I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL 0x26 -#define I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL 0xA0 -#define I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL 0x08 -#define I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL 0x16 -#define I2C_DVI_PLL_FILTER_LOW_SPEED_VAL 0x60 - -/* Clear test pattern */ -#define I2C_DVI_TEST_PATTERN_VAL 0x18 -/* Exit Power-down mode */ -#define I2C_DVI_POWER_MGMT_VAL 0xC0 - -/* Monitor polarity is handled via DVI Sync Polarity Register */ -#define I2C_DVI_SYNC_POLARITY_VAL 0x00 - -/* Programming of HDMI Chrontel CH7301 connector */ -int diu_set_dvi_encoder(unsigned int pixclock) -{ - int ret; - u8 temp; - - temp = I2C_DVI_TEST_PATTERN_VAL; -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *dev; - - ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_DVI_BUS_NUM, - CONFIG_SYS_I2C_DVI_ADDR, - 1, &dev); - if (ret) { - printf("%s: Cannot find udev for a bus %d\n", __func__, - CONFIG_SYS_I2C_DVI_BUS_NUM); - return ret; - } - ret = dm_i2c_write(dev, I2C_DVI_TEST_PATTERN_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select proper dvi test pattern\n"); - return ret; - } - temp = I2C_DVI_INPUT_DATA_FORMAT_VAL; - ret = dm_i2c_write(dev, I2C_DVI_INPUT_DATA_FORMAT_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi input data format\n"); - return ret; - } - - /* Set Sync polarity register */ - temp = I2C_DVI_SYNC_POLARITY_VAL; - ret = dm_i2c_write(dev, I2C_DVI_SYNC_POLARITY_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi syc polarity\n"); - return ret; - } - - /* Set PLL registers based on pixel clock rate*/ - if (pixclock > 65000000) { - temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_CHARGE_CNTL_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_DIVIDER_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_FILTER_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } else { - temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_CHARGE_CNTL_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_DIVIDER_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_FILTER_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } - - temp = I2C_DVI_POWER_MGMT_VAL; - ret = dm_i2c_write(dev, I2C_DVI_POWER_MGMT_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi power mgmt\n"); - return ret; - } -#else - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_TEST_PATTERN_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select proper dvi test pattern\n"); - return ret; - } - temp = I2C_DVI_INPUT_DATA_FORMAT_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_INPUT_DATA_FORMAT_REG, - 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi input data format\n"); - return ret; - } - - /* Set Sync polarity register */ - temp = I2C_DVI_SYNC_POLARITY_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_SYNC_POLARITY_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select dvi syc polarity\n"); - return ret; - } - - /* Set PLL registers based on pixel clock rate*/ - if (pixclock > 65000000) { - temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_FILTER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } else { - temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_FILTER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } - - temp = I2C_DVI_POWER_MGMT_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_POWER_MGMT_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select dvi power mgmt\n"); - return ret; - } -#endif - - udelay(500); - - return 0; -} diff --git a/board/freescale/common/diu_ch7301.h b/board/freescale/common/diu_ch7301.h deleted file mode 100644 index f35661c..0000000 --- a/board/freescale/common/diu_ch7301.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - */ - -#ifndef __DIU_HDMI_CH7301__ -#define __DIU_HDMI_CH7301__ - -/* Programming of HDMI Chrontel CH7301 connector */ -int diu_set_dvi_encoder(unsigned int pixclock); - -#endif diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index d67e941..a949501 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -8,7 +8,6 @@ else obj-y += t104xrdb.o obj-y += cpld.o obj-y += eth.o -obj-$(CONFIG_FSL_DIU_FB)+= diu.o endif obj-y += ddr.o obj-y += law.o diff --git a/board/freescale/t104xrdb/diu.c b/board/freescale/t104xrdb/diu.c deleted file mode 100644 index 022d329..0000000 --- a/board/freescale/t104xrdb/diu.c +++ /dev/null @@ -1,83 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * Author: Priyanka Jain <Priyanka.Jain@freescale.com> - */ - -#include <clock_legacy.h> -#include <asm/io.h> -#include <common.h> -#include <command.h> -#include <fsl_diu_fb.h> -#include <linux/ctype.h> - -#include "../common/diu_ch7301.h" - -#include "cpld.h" -#include "t104xrdb.h" - -/* - * DIU Area Descriptor - * - * Note that we need to byte-swap the value before it's written to the AD - * register. So even though the registers don't look like they're in the same - * bit positions as they are on the MPC8610, the same value is written to the - * AD register on the MPC8610 and on the P1022. - */ -#define AD_BYTE_F 0x10000000 -#define AD_ALPHA_C_SHIFT 25 -#define AD_BLUE_C_SHIFT 23 -#define AD_GREEN_C_SHIFT 21 -#define AD_RED_C_SHIFT 19 -#define AD_PIXEL_S_SHIFT 16 -#define AD_COMP_3_SHIFT 12 -#define AD_COMP_2_SHIFT 8 -#define AD_COMP_1_SHIFT 4 -#define AD_COMP_0_SHIFT 0 - -void diu_set_pixel_clock(unsigned int pixclock) -{ - unsigned long speed_ccb, temp; - u32 pixval; - int ret; - - speed_ccb = get_bus_freq(0); - temp = 1000000000 / pixclock; - temp *= 1000; - pixval = speed_ccb / temp; - - /* Program HDMI encoder */ - ret = diu_set_dvi_encoder(temp); - if (ret) { - puts("Failed to set DVI encoder\n"); - return; - } - - /* Program pixel clock */ - out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, - ((pixval << PXCK_BITS_START) & PXCK_MASK)); - - /* enable clock*/ - out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK | - ((pixval << PXCK_BITS_START) & PXCK_MASK)); -} - -int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) -{ - u32 pixel_format; - u8 sw; - - /*Configure Display ouput port as HDMI*/ - sw = CPLD_READ(sfp_ctl_status); - CPLD_WRITE(sfp_ctl_status , sw & ~(CPLD_DIU_SEL_DFP)); - - pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) | - (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) | - (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) | - (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) | - (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT)); - - printf("DIU: Switching to monitor DVI @ %ux%u\n", xres, yres); - - return fsl_diu_init(xres, yres, pixel_format, 0); -} diff --git a/drivers/video/Makefile b/drivers/video/Makefile index dc51e04..616e76f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -31,7 +31,6 @@ obj-y += ti/ obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o obj-$(CONFIG_FORMIKE) += formike.o -obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o obj-$(CONFIG_IHS_VIDEO_OUT) += ihs_video_out.o obj-$(CONFIG_LD9040) += ld9040.o obj-$(CONFIG_LG4573) += lg4573.o diff --git a/drivers/video/fsl_diu_fb.c b/drivers/video/fsl_diu_fb.c deleted file mode 100644 index 6e335b5..0000000 --- a/drivers/video/fsl_diu_fb.c +++ /dev/null @@ -1,415 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc. - * Authors: York Sun <yorksun@freescale.com> - * Timur Tabi <timur@freescale.com> - * - * FSL DIU Framebuffer driver - */ - -#include <common.h> -#include <malloc.h> -#include <asm/io.h> - -#include "videomodes.h" -#include <fsl_diu_fb.h> -#include <linux/list.h> -#include <linux/fb.h> - -/* This setting is used for the ifm pdm360ng with PRIMEVIEW PM070WL3 */ -static struct fb_videomode fsl_diu_mode_800_480 = { - .name = "800x480-60", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 31250, - .left_margin = 86, - .right_margin = 42, - .upper_margin = 33, - .lower_margin = 10, - .hsync_len = 128, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -}; - -/* For the SHARP LQ084S3LG01, used on the P1022DS board */ -static struct fb_videomode fsl_diu_mode_800_600 = { - .name = "800x600-60", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .left_margin = 88, - .right_margin = 40, - .upper_margin = 23, - .lower_margin = 1, - .hsync_len = 128, - .vsync_len = 4, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -/* - * These parameters give default parameters - * for video output 1024x768, - * FIXME - change timing to proper amounts - * hsync 31.5kHz, vsync 60Hz - */ -static struct fb_videomode fsl_diu_mode_1024_768 = { - .name = "1024x768-60", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15385, - .left_margin = 160, - .right_margin = 24, - .upper_margin = 29, - .lower_margin = 3, - .hsync_len = 136, - .vsync_len = 6, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_videomode fsl_diu_mode_1280_1024 = { - .name = "1280x1024-60", - .refresh = 60, - .xres = 1280, - .yres = 1024, - .pixclock = 9375, - .left_margin = 38, - .right_margin = 128, - .upper_margin = 2, - .lower_margin = 7, - .hsync_len = 216, - .vsync_len = 37, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_videomode fsl_diu_mode_1280_720 = { - .name = "1280x720-60", - .refresh = 60, - .xres = 1280, - .yres = 720, - .pixclock = 13426, - .left_margin = 192, - .right_margin = 64, - .upper_margin = 22, - .lower_margin = 1, - .hsync_len = 136, - .vsync_len = 3, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_videomode fsl_diu_mode_1920_1080 = { - .name = "1920x1080-60", - .refresh = 60, - .xres = 1920, - .yres = 1080, - .pixclock = 5787, - .left_margin = 328, - .right_margin = 120, - .upper_margin = 34, - .lower_margin = 1, - .hsync_len = 208, - .vsync_len = 3, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -/* - * These are the fields of area descriptor(in DDR memory) for every plane - */ -struct diu_ad { - /* Word 0(32-bit) in DDR memory */ - __le32 pix_fmt; /* hard coding pixel format */ - /* Word 1(32-bit) in DDR memory */ - __le32 addr; - /* Word 2(32-bit) in DDR memory */ - __le32 src_size_g_alpha; - /* Word 3(32-bit) in DDR memory */ - __le32 aoi_size; - /* Word 4(32-bit) in DDR memory */ - __le32 offset_xyi; - /* Word 5(32-bit) in DDR memory */ - __le32 offset_xyd; - /* Word 6(32-bit) in DDR memory */ - __le32 ckmax_r:8; - __le32 ckmax_g:8; - __le32 ckmax_b:8; - __le32 res9:8; - /* Word 7(32-bit) in DDR memory */ - __le32 ckmin_r:8; - __le32 ckmin_g:8; - __le32 ckmin_b:8; - __le32 res10:8; - /* Word 8(32-bit) in DDR memory */ - __le32 next_ad; - /* Word 9(32-bit) in DDR memory, just for 64-bit aligned */ - __le32 res[3]; -} __attribute__ ((packed)); - -/* - * DIU register map - */ -struct diu { - __be32 desc[3]; - __be32 gamma; - __be32 pallete; - __be32 cursor; - __be32 curs_pos; - __be32 diu_mode; - __be32 bgnd; - __be32 bgnd_wb; - __be32 disp_size; - __be32 wb_size; - __be32 wb_mem_addr; - __be32 hsyn_para; - __be32 vsyn_para; - __be32 syn_pol; - __be32 thresholds; - __be32 int_status; - __be32 int_mask; - __be32 colorbar[8]; - __be32 filling; - __be32 plut; -} __attribute__ ((packed)); - -struct diu_addr { - void *vaddr; /* Virtual address */ - u32 paddr; /* 32-bit physical address */ - unsigned int offset; /* Alignment offset */ -}; - -static struct fb_info info; - -/* - * Align to 64-bit(8-byte), 32-byte, etc. - */ -static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) -{ - u32 offset, ssize; - u32 mask; - - ssize = size + bytes_align; - buf->vaddr = malloc(ssize); - if (!buf->vaddr) - return -1; - - memset(buf->vaddr, 0, ssize); - mask = bytes_align - 1; - offset = (u32)buf->vaddr & mask; - if (offset) { - buf->offset = bytes_align - offset; - buf->vaddr += offset; - } else - buf->offset = 0; - - buf->paddr = virt_to_phys(buf->vaddr); - return 0; -} - -/* - * Allocate a framebuffer and an Area Descriptor that points to it. Both - * are created in the same memory block. The Area Descriptor is updated to - * point to the framebuffer memory. Memory is aligned as needed. - */ -static struct diu_ad *allocate_fb(unsigned int xres, unsigned int yres, - unsigned int depth, char **fb) -{ - unsigned long size = xres * yres * depth; - struct diu_addr addr; - struct diu_ad *ad; - size_t ad_size = roundup(sizeof(struct diu_ad), 32); - - /* - * Allocate a memory block that holds the Area Descriptor and the - * frame buffer right behind it. To keep the code simple, everything - * is aligned on a 32-byte address. - */ - if (allocate_buf(&addr, ad_size + size, 32) < 0) - return NULL; - - ad = addr.vaddr; - ad->addr = cpu_to_le32(addr.paddr + ad_size); - ad->aoi_size = cpu_to_le32((yres << 16) | xres); - ad->src_size_g_alpha = cpu_to_le32((yres << 12) | xres); - ad->offset_xyi = 0; - ad->offset_xyd = 0; - - if (fb) - *fb = addr.vaddr + ad_size; - - return ad; -} - -int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix) -{ - struct fb_videomode *fsl_diu_mode_db; - struct diu_ad *ad; - struct diu *hw = (struct diu *)CONFIG_SYS_DIU_ADDR; - u8 *gamma_table_base; - unsigned int i, j; - struct diu_addr gamma; - struct diu_addr cursor; - -/* Convert the X,Y resolution pair into a single number */ -#define RESOLUTION(x, y) (((u32)(x) << 16) | (y)) - - switch (RESOLUTION(xres, yres)) { - case RESOLUTION(800, 480): - fsl_diu_mode_db = &fsl_diu_mode_800_480; - break; - case RESOLUTION(800, 600): - fsl_diu_mode_db = &fsl_diu_mode_800_600; - break; - case RESOLUTION(1024, 768): - fsl_diu_mode_db = &fsl_diu_mode_1024_768; - break; - case RESOLUTION(1280, 1024): - fsl_diu_mode_db = &fsl_diu_mode_1280_1024; - break; - case RESOLUTION(1280, 720): - fsl_diu_mode_db = &fsl_diu_mode_1280_720; - break; - case RESOLUTION(1920, 1080): - fsl_diu_mode_db = &fsl_diu_mode_1920_1080; - break; - default: - printf("DIU: Unsupported resolution %ux%u\n", xres, yres); - return -1; - } - - /* read mode info */ - info.var.xres = fsl_diu_mode_db->xres; - info.var.yres = fsl_diu_mode_db->yres; - info.var.bits_per_pixel = 32; - info.var.pixclock = fsl_diu_mode_db->pixclock; - info.var.left_margin = fsl_diu_mode_db->left_margin; - info.var.right_margin = fsl_diu_mode_db->right_margin; - info.var.upper_margin = fsl_diu_mode_db->upper_margin; - info.var.lower_margin = fsl_diu_mode_db->lower_margin; - info.var.hsync_len = fsl_diu_mode_db->hsync_len; - info.var.vsync_len = fsl_diu_mode_db->vsync_len; - info.var.sync = fsl_diu_mode_db->sync; - info.var.vmode = fsl_diu_mode_db->vmode; - info.fix.line_length = info.var.xres * info.var.bits_per_pixel / 8; - - /* Memory allocation for framebuffer */ - info.screen_size = - info.var.xres * info.var.yres * (info.var.bits_per_pixel / 8); - ad = allocate_fb(info.var.xres, info.var.yres, - info.var.bits_per_pixel / 8, &info.screen_base); - if (!ad) { - printf("DIU: Out of memory\n"); - return -1; - } - - ad->pix_fmt = pixel_format; - - /* Disable chroma keying function */ - ad->ckmax_r = 0; - ad->ckmax_g = 0; - ad->ckmax_b = 0; - - ad->ckmin_r = 255; - ad->ckmin_g = 255; - ad->ckmin_b = 255; - - /* Initialize the gamma table */ - if (allocate_buf(&gamma, 256 * 3, 32) < 0) { - printf("DIU: Out of memory\n"); - return -1; - } - gamma_table_base = gamma.vaddr; - for (i = 0; i <= 2; i++) - for (j = 0; j < 256; j++) - *gamma_table_base++ = j; - - if (gamma_fix == 1) { /* fix the gamma */ - gamma_table_base = gamma.vaddr; - for (i = 0; i < 256 * 3; i++) { - gamma_table_base[i] = (gamma_table_base[i] << 2) - | ((gamma_table_base[i] >> 6) & 0x03); - } - } - - /* Initialize the cursor */ - if (allocate_buf(&cursor, 32 * 32 * 2, 32) < 0) { - printf("DIU: Can't alloc cursor data\n"); - return -1; - } - - /* Program DIU registers */ - out_be32(&hw->diu_mode, 0); /* Temporarily disable the DIU */ - - out_be32(&hw->gamma, gamma.paddr); - out_be32(&hw->cursor, cursor.paddr); - out_be32(&hw->bgnd, 0x007F7F7F); - out_be32(&hw->disp_size, info.var.yres << 16 | info.var.xres); - out_be32(&hw->hsyn_para, info.var.left_margin << 22 | - info.var.hsync_len << 11 | - info.var.right_margin); - - out_be32(&hw->vsyn_para, info.var.upper_margin << 22 | - info.var.vsync_len << 11 | - info.var.lower_margin); - - /* Pixel Clock configuration */ - diu_set_pixel_clock(info.var.pixclock); - - /* Set the frame buffers */ - out_be32(&hw->desc[0], virt_to_phys(ad)); - out_be32(&hw->desc[1], 0); - out_be32(&hw->desc[2], 0); - - /* Enable the DIU, set display to all three planes */ - out_be32(&hw->diu_mode, 1); - - return 0; -} - -void *video_hw_init(void) -{ - static GraphicDevice ctfb; - const char *options; - unsigned int depth = 0, freq = 0; - - if (!video_get_video_mode(&ctfb.winSizeX, &ctfb.winSizeY, &depth, &freq, - &options)) - return NULL; - - /* Find the monitor port, which is a required option */ - if (!options) - return NULL; - if (strncmp(options, "monitor=", 8) != 0) - return NULL; - - if (platform_diu_init(ctfb.winSizeX, ctfb.winSizeY, options + 8) < 0) - return NULL; - - /* fill in Graphic device struct */ - sprintf(ctfb.modeIdent, "%ix%ix%i %ikHz %iHz", - ctfb.winSizeX, ctfb.winSizeY, depth, 64, freq); - - ctfb.frameAdrs = (unsigned int)info.screen_base; - ctfb.plnSizeX = ctfb.winSizeX; - ctfb.plnSizeY = ctfb.winSizeY; - - ctfb.gdfBytesPP = 4; - ctfb.gdfIndex = GDF_32BIT_X888RGB; - - ctfb.isaBase = 0; - ctfb.pciBase = 0; - ctfb.memSize = info.screen_size; - - /* Cursor Start Address */ - ctfb.dprBase = 0; - ctfb.vprBase = 0; - ctfb.cprBase = 0; - - return &ctfb; -} diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 00fabd6..1fa1fc0 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -365,17 +365,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Video */ -#undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -/* - * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so - * disable empty flash sector detection, which is I/O-intensive. - */ -#undef CONFIG_SYS_FLASH_EMPTY_INFO -#endif - /* I2C */ #define I2C_PCA6408_BUS_NUM 1 diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 16298a7..562f7b3 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -345,18 +345,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB) -/* Video */ -#define CONFIG_FSL_DIU_FB - -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_FSL_DIU_CH7301 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#endif -#endif - -/* I2C */ - /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 #define I2C_MUX_CH_DEFAULT 0x8 @@ -558,18 +546,11 @@ #define FDTFILE "t1042rdb/t1042d4rdb.dtb" #endif -#ifdef CONFIG_FSL_DIU_FB -#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi" -#else -#define DIU_ENVIRONMENT -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "video-mode=" __stringify(DIU_ENVIRONMENT) "\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ diff --git a/include/fsl_diu_fb.h b/include/fsl_diu_fb.h deleted file mode 100644 index 139851b..0000000 --- a/include/fsl_diu_fb.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2007, 2011 Freescale Semiconductor, Inc. - * Authors: York Sun <yorksun@freescale.com> - * Timur Tabi <timur@freescale.com> - * - * FSL DIU Framebuffer driver - */ - -int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix); - -/* Prototypes for external board-specific functions */ -int platform_diu_init(unsigned int xres, unsigned int yres, const char *port); -void diu_set_pixel_clock(unsigned int pixclock); diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 62fce7c..ac0a949 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -158,8 +158,6 @@ CONFIG_FSL_CADMUS CONFIG_FSL_CORENET CONFIG_FSL_CPLD CONFIG_FSL_DEVICE_DISABLE -CONFIG_FSL_DIU_CH7301 -CONFIG_FSL_DIU_FB CONFIG_FSL_DSPI1 CONFIG_FSL_ESDHC_PIN_MUX CONFIG_FSL_FIXED_MMC_LOCATION @@ -988,7 +986,6 @@ CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS CONFIG_SYS_DIALOG_PMIC_I2C_ADDR CONFIG_SYS_DIRECT_FLASH_TFTP CONFIG_SYS_DISCOVER_PHY -CONFIG_SYS_DIU_ADDR CONFIG_SYS_DPAA_DCE CONFIG_SYS_DPAA_FMAN CONFIG_SYS_DPAA_PME |