aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/MAI/AmigaOneG3SE/AmigaOneG3SE.c86
-rw-r--r--board/MAI/AmigaOneG3SE/enet.c601
-rw-r--r--board/MAI/AmigaOneG3SE/interrupts.c6
-rw-r--r--board/MAI/AmigaOneG3SE/ps2kbd.c455
-rw-r--r--board/MAI/AmigaOneG3SE/start.txt4
-rw-r--r--board/MAI/AmigaOneG3SE/u-boot.lds8
-rw-r--r--board/MAI/AmigaOneG3SE/usb_uhci.c2
-rw-r--r--board/MAI/AmigaOneG3SE/via686.c8
-rw-r--r--board/MAI/menu/menu.h92
-rw-r--r--board/Marvell/common/bootseq.txt4
-rw-r--r--board/Marvell/common/flash.c2
-rw-r--r--board/Marvell/db64360/mpsc.c2
-rw-r--r--board/Marvell/db64360/mpsc.h6
-rw-r--r--board/Marvell/db64360/mv_eth.c62
-rw-r--r--board/Marvell/db64360/u-boot.lds8
-rw-r--r--board/Marvell/db64460/mpsc.c2
-rw-r--r--board/Marvell/db64460/mpsc.h6
-rw-r--r--board/Marvell/db64460/mv_eth.c62
-rw-r--r--board/Marvell/db64460/u-boot.lds8
-rw-r--r--board/MigoR/lowlevel_init.S24
-rw-r--r--board/RPXClassic/u-boot.lds8
-rw-r--r--board/RPXClassic/u-boot.lds.debug8
-rw-r--r--board/RPXlite/flash.c2
-rw-r--r--board/RPXlite/u-boot.lds8
-rw-r--r--board/RPXlite/u-boot.lds.debug8
-rw-r--r--board/RPXlite_dw/RPXlite_dw.c2
-rw-r--r--board/RPXlite_dw/flash.c6
-rw-r--r--board/RPXlite_dw/u-boot.lds8
-rw-r--r--board/RPXlite_dw/u-boot.lds.debug8
-rw-r--r--board/RRvision/u-boot.lds8
-rw-r--r--board/a3000/Makefile2
-rw-r--r--board/a3000/a3000.c2
-rw-r--r--board/adder/u-boot.lds8
-rw-r--r--board/ads5121/u-boot.lds8
-rw-r--r--board/amcc/acadia/u-boot-nand.lds8
-rw-r--r--board/amcc/acadia/u-boot.lds8
-rw-r--r--board/amcc/bamboo/bamboo.c126
-rw-r--r--board/amcc/bamboo/u-boot-nand.lds8
-rw-r--r--board/amcc/bamboo/u-boot.lds8
-rw-r--r--board/amcc/bubinga/u-boot.lds8
-rw-r--r--board/amcc/canyonlands/u-boot-nand.lds8
-rw-r--r--board/amcc/canyonlands/u-boot.lds8
-rw-r--r--board/amcc/ebony/u-boot.lds8
-rw-r--r--board/amcc/katmai/katmai.c22
-rw-r--r--board/amcc/kilauea/Makefile2
-rw-r--r--board/amcc/kilauea/init.S6
-rw-r--r--board/amcc/kilauea/kilauea.c22
-rw-r--r--board/amcc/kilauea/u-boot-nand.lds8
-rw-r--r--board/amcc/kilauea/u-boot.lds8
-rw-r--r--board/amcc/luan/u-boot.lds8
-rw-r--r--board/amcc/makalu/Makefile2
-rw-r--r--board/amcc/makalu/init.S6
-rw-r--r--board/amcc/makalu/makalu.c22
-rw-r--r--board/amcc/makalu/u-boot.lds8
-rw-r--r--board/amcc/ocotea/u-boot.lds8
-rw-r--r--board/amcc/sequoia/u-boot-nand.lds8
-rw-r--r--board/amcc/sequoia/u-boot.lds8
-rw-r--r--board/amcc/taihu/u-boot.lds8
-rw-r--r--board/amcc/taishan/u-boot.lds8
-rw-r--r--board/amcc/walnut/u-boot.lds8
-rw-r--r--board/amcc/yosemite/u-boot.lds8
-rw-r--r--board/amcc/yucca/yucca.c30
-rw-r--r--board/amirix/ap1000/u-boot.lds8
-rw-r--r--board/apollon/apollon.c2
-rw-r--r--board/armadillo/lowlevel_init.S4
-rw-r--r--board/assabet/assabet.c2
-rw-r--r--board/atmel/at91sam9260ek/at91sam9260ek.c2
-rw-r--r--board/atum8548/u-boot.lds8
-rw-r--r--board/barco/speed.h4
-rw-r--r--board/bc3450/cmd_bc3450.c2
-rw-r--r--board/bf533-ezkit/flash-defines.h8
-rw-r--r--board/bf533-stamp/bf533-stamp.h10
-rw-r--r--board/bmw/README2
-rw-r--r--board/bmw/early_init.S6
-rw-r--r--board/c2mon/pcmcia.c4
-rw-r--r--board/c2mon/u-boot.lds8
-rw-r--r--board/c2mon/u-boot.lds.debug8
-rw-r--r--board/cerf250/lowlevel_init.S260
-rw-r--r--board/cm5200/u-boot.lds8
-rw-r--r--board/cmc_pu2/cmc_pu2.c2
-rw-r--r--board/cmi/flash.c8
-rw-r--r--board/cobra5272/u-boot.lds8
-rw-r--r--board/cogent/lcd.h2
-rw-r--r--board/cogent/u-boot.lds8
-rw-r--r--board/cogent/u-boot.lds.debug8
-rw-r--r--board/cpc45/plx9030.c6
-rw-r--r--board/cray/L1/L1.h4
-rw-r--r--board/cray/L1/u-boot.lds8
-rw-r--r--board/cray/L1/u-boot.lds.debug8
-rw-r--r--board/csb226/lowlevel_init.S8
-rw-r--r--board/csb272/u-boot.lds8
-rw-r--r--board/csb472/u-boot.lds8
-rw-r--r--board/dave/B2/B2.c8
-rw-r--r--board/dave/PPChameleonEVB/u-boot.lds8
-rw-r--r--board/davinci/dv-evm/dv_board.c2
-rw-r--r--board/davinci/schmoogie/dv_board.c2
-rw-r--r--board/davinci/sonata/dv_board.c2
-rw-r--r--board/eltec/bab7xx/u-boot.lds8
-rw-r--r--board/eltec/elppc/u-boot.lds8
-rw-r--r--board/eltec/mhpc/u-boot.lds8
-rw-r--r--board/eltec/mhpc/u-boot.lds.debug8
-rw-r--r--board/emk/top860/u-boot.lds8
-rw-r--r--board/emk/top860/u-boot.lds.debug8
-rw-r--r--board/ep8260/flash.c6
-rw-r--r--board/ep82xxm/ep82xxm.c266
-rw-r--r--board/ep88x/u-boot.lds8
-rw-r--r--board/eric/flash.c195
-rw-r--r--board/eric/u-boot.lds8
-rw-r--r--board/esd/adciop/u-boot.lds8
-rw-r--r--board/esd/apc405/u-boot.lds8
-rw-r--r--board/esd/ar405/u-boot.lds8
-rw-r--r--board/esd/ash405/u-boot.lds8
-rw-r--r--board/esd/canbt/u-boot.lds8
-rw-r--r--board/esd/cms700/cms700.c2
-rw-r--r--board/esd/cms700/u-boot.lds8
-rw-r--r--board/esd/cpci2dp/u-boot.lds8
-rw-r--r--board/esd/cpci405/u-boot.lds8
-rw-r--r--board/esd/cpci5200/Makefile4
-rw-r--r--board/esd/cpci750/mpsc.c2
-rw-r--r--board/esd/cpci750/mpsc.h6
-rw-r--r--board/esd/cpci750/mv_eth.c62
-rw-r--r--board/esd/cpci750/sdram_init.c259
-rw-r--r--board/esd/cpci750/u-boot.lds8
-rw-r--r--board/esd/cpciiser4/u-boot.lds8
-rw-r--r--board/esd/dasa_sim/u-boot.lds8
-rw-r--r--board/esd/dp405/u-boot.lds8
-rw-r--r--board/esd/du405/u-boot.lds8
-rw-r--r--board/esd/du440/u-boot.lds8
-rw-r--r--board/esd/hh405/hh405.c2
-rw-r--r--board/esd/hh405/u-boot.lds8
-rw-r--r--board/esd/hub405/u-boot.lds8
-rw-r--r--board/esd/ocrtc/u-boot.lds8
-rw-r--r--board/esd/pci405/cmd_pci405.c2
-rw-r--r--board/esd/pci405/u-boot.lds8
-rw-r--r--board/esd/pf5200/Makefile4
-rw-r--r--board/esd/plu405/u-boot.lds8
-rw-r--r--board/esd/pmc405/u-boot.lds8
-rw-r--r--board/esd/pmc440/u-boot-nand.lds8
-rw-r--r--board/esd/pmc440/u-boot.lds8
-rw-r--r--board/esd/tasreg/u-boot.lds8
-rw-r--r--board/esd/voh405/u-boot.lds8
-rw-r--r--board/esd/vom405/u-boot.lds8
-rw-r--r--board/esd/wuh405/u-boot.lds8
-rw-r--r--board/esteem192e/flash.c1030
-rw-r--r--board/esteem192e/u-boot.lds8
-rw-r--r--board/etin/debris/debris.c2
-rw-r--r--board/etin/debris/speed.h4
-rw-r--r--board/etx094/u-boot.lds8
-rw-r--r--board/etx094/u-boot.lds.debug8
-rw-r--r--board/evb64260/bootseq.txt4
-rw-r--r--board/evb64260/eth.c2
-rw-r--r--board/evb64260/mpsc.c4
-rw-r--r--board/evb64260/mpsc.h6
-rw-r--r--board/evb64260/u-boot.lds8
-rw-r--r--board/evb64260/zuma_pbb_mbox.c2
-rw-r--r--board/exbitgen/exbitgen.h18
-rw-r--r--board/exbitgen/init.S6
-rw-r--r--board/exbitgen/u-boot.lds8
-rw-r--r--board/fads/fads.h6
-rw-r--r--board/fads/pcmcia.c2
-rw-r--r--board/fads/u-boot.lds8
-rw-r--r--board/fads/u-boot.lds.debug8
-rw-r--r--board/flagadm/u-boot.lds8
-rw-r--r--board/flagadm/u-boot.lds.debug8
-rw-r--r--board/freescale/common/fsl_diu_fb.c6
-rw-r--r--board/freescale/common/pixis.c2
-rw-r--r--board/freescale/common/sys_eeprom.c10
-rw-r--r--board/freescale/m52277evb/u-boot.lds8
-rw-r--r--board/freescale/m5235evb/u-boot.168
-rw-r--r--board/freescale/m5235evb/u-boot.328
-rw-r--r--board/freescale/m5235evb/u-boot.lds8
-rw-r--r--board/freescale/m5249evb/u-boot.lds8
-rw-r--r--board/freescale/m5253evbe/u-boot.lds8
-rw-r--r--board/freescale/m5275evb/u-boot.lds2
-rw-r--r--board/freescale/m5329evb/u-boot.lds8
-rw-r--r--board/freescale/m5373evb/u-boot.lds8
-rw-r--r--board/freescale/m54455evb/u-boot.atm8
-rw-r--r--board/freescale/m54455evb/u-boot.int8
-rw-r--r--board/freescale/m54455evb/u-boot.lds8
-rw-r--r--board/freescale/m547xevb/u-boot.lds8
-rw-r--r--board/freescale/m548xevb/u-boot.lds8
-rw-r--r--board/freescale/mpc7448hpc2/asm_init.S2
-rw-r--r--board/freescale/mpc7448hpc2/tsi108_init.c2
-rw-r--r--board/freescale/mpc7448hpc2/u-boot.lds8
-rw-r--r--board/freescale/mpc8260ads/mpc8260ads.c2
-rw-r--r--board/freescale/mpc8349emds/pci.c2
-rw-r--r--board/freescale/mpc8349itx/mpc8349itx.c6
-rw-r--r--board/freescale/mpc8540ads/u-boot.lds8
-rw-r--r--board/freescale/mpc8541cds/u-boot.lds8
-rw-r--r--board/freescale/mpc8544ds/u-boot.lds8
-rw-r--r--board/freescale/mpc8548cds/u-boot.lds8
-rw-r--r--board/freescale/mpc8555cds/u-boot.lds8
-rw-r--r--board/freescale/mpc8560ads/u-boot.lds8
-rw-r--r--board/freescale/mpc8568mds/bcsr.h12
-rw-r--r--board/freescale/mpc8568mds/tlb.c2
-rw-r--r--board/freescale/mpc8568mds/u-boot.lds8
-rw-r--r--board/freescale/mpc8641hpcn/u-boot.lds8
-rw-r--r--board/g2000/u-boot.lds8
-rw-r--r--board/gen860t/README2
-rw-r--r--board/gen860t/beeper.c104
-rw-r--r--board/gen860t/beeper.h2
-rw-r--r--board/gen860t/flash.c22
-rw-r--r--board/gen860t/fpga.c2
-rw-r--r--board/gen860t/fpga.h2
-rw-r--r--board/gen860t/ioport.c16
-rw-r--r--board/gen860t/ioport.h2
-rw-r--r--board/gen860t/u-boot-flashenv.lds8
-rw-r--r--board/gen860t/u-boot.lds8
-rw-r--r--board/genietv/flash.c8
-rw-r--r--board/genietv/u-boot.lds8
-rw-r--r--board/genietv/u-boot.lds.debug8
-rw-r--r--board/gth/flash.c2
-rw-r--r--board/gth/u-boot.lds8
-rw-r--r--board/hermes/u-boot.lds8
-rw-r--r--board/hermes/u-boot.lds.debug8
-rw-r--r--board/hidden_dragon/speed.h4
-rw-r--r--board/hymod/hymod.c6
-rw-r--r--board/hymod/u-boot.lds8
-rw-r--r--board/hymod/u-boot.lds.debug8
-rw-r--r--board/icu862/pcmcia.c4
-rw-r--r--board/icu862/u-boot.lds8
-rw-r--r--board/icu862/u-boot.lds.debug8
-rw-r--r--board/idmr/u-boot.lds8
-rw-r--r--board/imx31_litekit/lowlevel_init.S4
-rw-r--r--board/imx31_phycore/lowlevel_init.S4
-rw-r--r--board/innokom/flash.c6
-rw-r--r--board/innokom/lowlevel_init.S8
-rw-r--r--board/integratorap/memsetup.S2
-rwxr-xr-xboard/integratorap/split_by_variant.sh28
-rw-r--r--board/integratorcp/flash.c2
-rw-r--r--board/integratorcp/memsetup.S2
-rwxr-xr-xboard/integratorcp/split_by_variant.sh42
-rw-r--r--board/ip860/u-boot.lds8
-rw-r--r--board/ip860/u-boot.lds.debug8
-rw-r--r--board/ivm/u-boot.lds8
-rw-r--r--board/ivm/u-boot.lds.debug8
-rw-r--r--board/ixdp425/flash.c18
-rw-r--r--board/jse/u-boot.lds8
-rw-r--r--board/korat/u-boot-F7FC.lds8
-rw-r--r--board/korat/u-boot.lds8
-rw-r--r--board/kup/common/pcmcia.c2
-rw-r--r--board/kup/kup4k/u-boot.lds8
-rw-r--r--board/kup/kup4k/u-boot.lds.debug8
-rw-r--r--board/kup/kup4x/u-boot.lds8
-rw-r--r--board/kup/kup4x/u-boot.lds.debug8
-rw-r--r--board/lantec/u-boot.lds8
-rw-r--r--board/lantec/u-boot.lds.debug8
-rw-r--r--board/linkstation/avr.c4
-rw-r--r--board/logodl/flash.c2
-rw-r--r--board/logodl/lowlevel_init.S8
-rw-r--r--board/lpc2292sodimm/lowlevel_init.S12
-rw-r--r--board/lpd7a40x/lowlevel_init.S4
-rw-r--r--board/lubbock/lowlevel_init.S2
-rw-r--r--board/lwmon/pcmcia.c6
-rw-r--r--board/lwmon/u-boot.lds8
-rw-r--r--board/lwmon/u-boot.lds.debug8
-rw-r--r--board/lwmon5/u-boot.lds8
-rw-r--r--board/m5271evb/u-boot.lds8
-rw-r--r--board/m5272c3/u-boot.lds8
-rw-r--r--board/m5282evb/u-boot.lds8
-rw-r--r--board/mbx8xx/u-boot.lds8
-rw-r--r--board/mbx8xx/u-boot.lds.debug8
-rw-r--r--board/mgsuvd/u-boot.lds8
-rw-r--r--board/ml2/u-boot.lds8
-rw-r--r--board/ml2/u-boot.lds.debug8
-rw-r--r--board/mousse/u-boot.lds8
-rw-r--r--board/mousse/u-boot.lds.ram6
-rw-r--r--board/mousse/u-boot.lds.rom8
-rw-r--r--board/mpc8540eval/u-boot.lds8
-rw-r--r--board/mpl/common/common_util.c14
-rw-r--r--board/mpl/common/common_util.h2
-rw-r--r--board/mpl/common/flash.c2
-rw-r--r--board/mpl/common/kbd.c256
-rw-r--r--board/mpl/common/memtst.c14
-rw-r--r--board/mpl/common/pci.c2
-rw-r--r--board/mpl/common/pci_parts.h36
-rw-r--r--board/mpl/common/usb_uhci.c2
-rw-r--r--board/mpl/mip405/cmd_mip405.c10
-rw-r--r--board/mpl/mip405/mip405.c12
-rw-r--r--board/mpl/mip405/mip405.h28
-rw-r--r--board/mpl/mip405/u-boot.lds8
-rw-r--r--board/mpl/pati/cmd_pati.c6
-rw-r--r--board/mpl/pati/pati.c2
-rw-r--r--board/mpl/pati/pati.h50
-rw-r--r--board/mpl/pati/pci_eeprom.h102
-rw-r--r--board/mpl/pip405/cmd_pip405.c10
-rw-r--r--board/mpl/pip405/pip405.h20
-rw-r--r--board/mpl/pip405/u-boot.lds8
-rw-r--r--board/mpl/pip405/u-boot.lds.debug8
-rw-r--r--board/mpl/vcma9/cmd_vcma9.c4
-rw-r--r--board/mpl/vcma9/lowlevel_init.S142
-rw-r--r--board/ms7722se/lowlevel_init.S24
-rw-r--r--board/munices/u-boot.lds8
-rw-r--r--board/musenki/musenki.c2
-rw-r--r--board/mvblue/flash.c10
-rw-r--r--board/mvs1/flash.c4
-rw-r--r--board/mvs1/u-boot.lds8
-rw-r--r--board/mvs1/u-boot.lds.debug8
-rw-r--r--board/mx1ads/lowlevel_init.S10
-rw-r--r--board/mx1ads/mx1ads.c4
-rw-r--r--board/mx1ads/syncflash.c62
-rw-r--r--board/mx1fs2/flash.c2
-rw-r--r--board/mx1fs2/lowlevel_init.S18
-rw-r--r--board/nc650/u-boot.lds8
-rw-r--r--board/nc650/u-boot.lds.debug8
-rw-r--r--board/netphone/netphone.c2
-rw-r--r--board/netphone/u-boot.lds10
-rw-r--r--board/netphone/u-boot.lds.debug8
-rw-r--r--board/netstal/hcu4/u-boot.lds8
-rw-r--r--board/netstal/hcu5/hcu5.c4
-rw-r--r--board/netstal/hcu5/init.S4
-rw-r--r--board/netstal/hcu5/u-boot.lds8
-rw-r--r--board/netstal/mcu25/u-boot.lds8
-rw-r--r--board/netstar/crcek.S4
-rw-r--r--board/netstar/eeprom_start.S4
-rw-r--r--board/netstar/setup.S2
-rw-r--r--board/netta/dsp.c2
-rw-r--r--board/netta/pcmcia.c10
-rw-r--r--board/netta/u-boot.lds12
-rw-r--r--board/netta/u-boot.lds.debug8
-rw-r--r--board/netta2/u-boot.lds12
-rw-r--r--board/netta2/u-boot.lds.debug8
-rw-r--r--board/netvia/u-boot.lds12
-rw-r--r--board/netvia/u-boot.lds.debug8
-rw-r--r--board/ns9750dev/ns9750dev.c2
-rw-r--r--board/nx823/u-boot.lds8
-rw-r--r--board/nx823/u-boot.lds.debug8
-rw-r--r--board/omap1610inn/lowlevel_init.S16
-rw-r--r--board/omap1610inn/omap1610innovator.c4
-rw-r--r--board/omap2420h4/mem.c2
-rw-r--r--board/omap2420h4/omap2420h4.c2
-rw-r--r--board/omap5912osk/lowlevel_init.S6
-rw-r--r--board/omap730p2/lowlevel_init.S10
-rw-r--r--board/oxc/flash.c2
-rw-r--r--board/pcippc2/cpc710_init_ram.c362
-rw-r--r--board/pcippc2/fpga_serial.h10
-rw-r--r--board/pcippc2/pcippc2.h6
-rw-r--r--board/pcippc2/sconsole.h25
-rw-r--r--board/pcippc2/u-boot.lds8
-rw-r--r--board/pcs440ep/pcs440ep.c8
-rw-r--r--board/pcs440ep/u-boot.lds8
-rw-r--r--board/pm520/flash.c42
-rw-r--r--board/pm854/pm854.c2
-rw-r--r--board/pm854/u-boot.lds8
-rw-r--r--board/pm856/pm856.c2
-rw-r--r--board/pm856/u-boot.lds8
-rw-r--r--board/pn62/pn62.h28
-rw-r--r--board/ppmc7xx/u-boot.lds8
-rw-r--r--board/prodrive/alpr/u-boot.lds8
-rw-r--r--board/prodrive/p3mx/mpsc.c2
-rw-r--r--board/prodrive/p3mx/mpsc.h6
-rw-r--r--board/prodrive/p3mx/u-boot.lds8
-rw-r--r--board/prodrive/p3p440/u-boot.lds8
-rw-r--r--board/purple/purple.c31
-rw-r--r--board/purple/sconsole.h21
-rw-r--r--board/pxa255_idp/lowlevel_init.S12
-rw-r--r--board/quantum/fpga.h1
-rw-r--r--board/quantum/u-boot.lds8
-rw-r--r--board/quantum/u-boot.lds.debug8
-rw-r--r--board/r360mpi/pcmcia.c4
-rw-r--r--board/r360mpi/u-boot.lds8
-rw-r--r--board/r7780mp/lowlevel_init.S6
-rw-r--r--board/rbc823/flash.c8
-rw-r--r--board/rbc823/u-boot.lds8
-rw-r--r--board/rmu/u-boot.lds8
-rw-r--r--board/rmu/u-boot.lds.debug8
-rw-r--r--board/rsdproto/flash.c44
-rw-r--r--board/rsdproto/u-boot.lds8
-rw-r--r--board/sandburst/karef/u-boot.lds8
-rw-r--r--board/sandburst/karef/u-boot.lds.debug8
-rw-r--r--board/sandburst/metrobox/u-boot.lds8
-rw-r--r--board/sandburst/metrobox/u-boot.lds.debug8
-rw-r--r--board/sandpoint/sandpoint.c2
-rw-r--r--board/sandpoint/speed.h4
-rw-r--r--board/sbc405/u-boot.lds8
-rw-r--r--board/sbc8548/law.c2
-rw-r--r--board/sbc8548/sbc8548.c2
-rw-r--r--board/sbc8548/u-boot.lds8
-rw-r--r--board/sbc8560/u-boot.lds8
-rw-r--r--board/sbc8641d/u-boot.lds8
-rw-r--r--board/sc3/sc3.c2
-rw-r--r--board/sc3/sc3.h2
-rw-r--r--board/sc3/u-boot.lds8
-rw-r--r--board/sc520_cdp/sc520_cdp.c6
-rw-r--r--board/sc520_cdp/sc520_cdp_asm.S2
-rw-r--r--board/sc520_cdp/u-boot.lds2
-rw-r--r--board/sc520_spunk/sc520_spunk.c24
-rw-r--r--board/sc520_spunk/sc520_spunk_asm.S2
-rw-r--r--board/sc520_spunk/u-boot.lds2
-rw-r--r--board/siemens/CCM/u-boot.lds8
-rw-r--r--board/siemens/CCM/u-boot.lds.debug8
-rw-r--r--board/siemens/IAD210/u-boot.lds8
-rw-r--r--board/siemens/SMN42/lowlevel_init.S10
-rw-r--r--board/siemens/pcu_e/u-boot.lds8
-rw-r--r--board/siemens/pcu_e/u-boot.lds.debug8
-rw-r--r--board/sixnet/u-boot.lds8
-rw-r--r--board/sl8245/Makefile2
-rw-r--r--board/smdk2410/lowlevel_init.S146
-rw-r--r--board/snmc/qs850/u-boot.lds8
-rw-r--r--board/snmc/qs860t/flash.c221
-rw-r--r--board/snmc/qs860t/u-boot.lds8
-rw-r--r--board/spc1920/u-boot.lds8
-rw-r--r--board/spd8xx/u-boot.lds8
-rw-r--r--board/spd8xx/u-boot.lds.debug8
-rw-r--r--board/stxgp3/u-boot.lds8
-rw-r--r--board/stxssa/u-boot.lds8
-rw-r--r--board/stxxtc/u-boot.lds12
-rw-r--r--board/stxxtc/u-boot.lds.debug8
-rw-r--r--board/svm_sc8xx/u-boot.lds8
-rw-r--r--board/svm_sc8xx/u-boot.lds.debug8
-rw-r--r--board/total5200/total5200.c2
-rw-r--r--board/tqm5200/cmd_stk52xx.c6
-rw-r--r--board/tqm8260/tqm8260.c2
-rw-r--r--board/tqm834x/pci.c2
-rw-r--r--board/tqm8xx/u-boot.lds8
-rw-r--r--board/tqm8xx/u-boot.lds.debug8
-rw-r--r--board/trab/lowlevel_init.S2
-rw-r--r--board/trab/memory.c2
-rw-r--r--board/trab/trab.c12
-rw-r--r--board/trab/tsc2000.h93
-rw-r--r--board/trab/vfd.c8
-rw-r--r--board/uc100/u-boot.lds8
-rw-r--r--board/uc100/u-boot.lds.debug8
-rw-r--r--board/uc100/uc100.c2
-rw-r--r--board/utx8245/flash.c2
-rw-r--r--board/v37/flash.c2
-rw-r--r--board/v37/u-boot.lds8
-rw-r--r--board/v37/v37.c4
-rw-r--r--board/versatile/flash.c2
-rw-r--r--board/versatile/versatile.c2
-rw-r--r--board/voiceblue/setup.S2
-rw-r--r--board/w7o/post1.S64
-rw-r--r--board/w7o/u-boot.lds8
-rw-r--r--board/w7o/u-boot.lds.debug8
-rw-r--r--board/wepep250/lowlevel_init.S8
-rw-r--r--board/westel/amx860/u-boot.lds8
-rw-r--r--board/westel/amx860/u-boot.lds.debug8
-rw-r--r--board/xilinx/common/xdma_channel.c10
-rw-r--r--board/xilinx/common/xdma_channel.h4
-rw-r--r--board/xilinx/ml300/u-boot.lds8
-rw-r--r--board/xilinx/ml300/u-boot.lds.debug8
-rw-r--r--board/xpedite1k/u-boot.lds8
-rw-r--r--board/xpedite1k/u-boot.lds.debug8
-rw-r--r--board/xsengine/lowlevel_init.S4
-rw-r--r--board/zeus/u-boot.lds8
-rw-r--r--common/cmd_autoscript.c2
-rw-r--r--common/cmd_dcr.c2
-rw-r--r--common/cmd_fdc.c136
-rw-r--r--common/cmd_fdt.c4
-rw-r--r--common/cmd_i2c.c16
-rw-r--r--common/cmd_ide.c6
-rw-r--r--common/cmd_mem.c60
-rw-r--r--common/cmd_pci.c2
-rw-r--r--common/cmd_reginfo.c112
-rw-r--r--common/cmd_scsi.c2
-rw-r--r--common/cmd_usb.c2
-rw-r--r--common/cmd_vfd.c8
-rw-r--r--common/command.c34
-rw-r--r--common/console.c2
-rw-r--r--common/env_dataflash.c2
-rw-r--r--common/env_nand.c2
-rw-r--r--common/hush.c1
-rw-r--r--common/lists.c4
-rw-r--r--common/usb.c6
-rw-r--r--common/usb_kbd.c4
-rw-r--r--common/virtex2.c2
-rw-r--r--config.mk2
-rw-r--r--cpu/arm1136/mx31/serial.c70
-rw-r--r--cpu/arm1136/start.S2
-rw-r--r--cpu/arm720t/interrupts.c2
-rw-r--r--cpu/arm720t/serial_netarm.c2
-rw-r--r--cpu/arm920t/at91rm9200/ether.c4
-rw-r--r--cpu/arm920t/imx/serial.c4
-rw-r--r--cpu/arm920t/s3c24x0/usb_ohci.c16
-rw-r--r--cpu/arm920t/s3c24x0/usb_ohci.h293
-rw-r--r--cpu/arm920t/start.S20
-rw-r--r--cpu/arm925t/start.S22
-rw-r--r--cpu/arm926ejs/davinci/dp83848.c2
-rw-r--r--cpu/arm926ejs/davinci/ether.c99
-rw-r--r--cpu/arm926ejs/davinci/lowlevel_init.S4
-rw-r--r--cpu/arm926ejs/davinci/nand.c22
-rw-r--r--cpu/arm926ejs/interrupts.c2
-rw-r--r--cpu/arm926ejs/start.S6
-rw-r--r--cpu/arm946es/start.S6
-rw-r--r--cpu/arm_intcm/start.S6
-rw-r--r--cpu/blackfin/flush.S2
-rw-r--r--cpu/blackfin/i2c.c2
-rw-r--r--cpu/blackfin/serial.c2
-rw-r--r--cpu/i386/sc520.c2
-rw-r--r--cpu/i386/sc520_asm.S8
-rw-r--r--cpu/i386/start.S12
-rw-r--r--cpu/i386/start16.S82
-rw-r--r--cpu/ixp/npe/IxEthAcc.c6
-rw-r--r--cpu/ixp/npe/IxEthAccCommon.c22
-rw-r--r--cpu/ixp/npe/IxEthAccDataPlane.c2
-rw-r--r--cpu/ixp/npe/IxEthAccMac.c6
-rw-r--r--cpu/ixp/npe/IxEthAccMii.c2
-rw-r--r--cpu/ixp/npe/IxNpeDlImageMgr.c2
-rw-r--r--cpu/ixp/npe/IxNpeDlNpeMgrUtils.c6
-rw-r--r--cpu/ixp/npe/IxOsalIoMem.c4
-rw-r--r--cpu/ixp/npe/IxQMgrAqmIf.c2
-rw-r--r--cpu/ixp/npe/IxQMgrQAccess.c2
-rw-r--r--cpu/ixp/npe/include/IxDmaAcc.h12
-rw-r--r--cpu/ixp/npe/include/IxEthAcc.h6
-rw-r--r--cpu/ixp/npe/include/IxEthAccMii_p.h6
-rw-r--r--cpu/ixp/npe/include/IxEthAcc_p.h2
-rw-r--r--cpu/ixp/npe/include/IxEthMii.h14
-rw-r--r--cpu/ixp/npe/include/IxI2cDrv.h4
-rw-r--r--cpu/ixp/npe/include/IxOsalAssert.h2
-rw-r--r--cpu/ixp/npe/include/IxOsalBackwardBufferMgt.h2
-rw-r--r--cpu/ixp/npe/include/IxOsalBackwardMemMap.h2
-rw-r--r--cpu/ixp/npe/include/IxOsalIoMem.h2
-rw-r--r--cpu/ixp/npe/include/IxOsalMemAccess.h6
-rw-r--r--cpu/ixp/npe/include/IxOsalTypes.h2
-rw-r--r--cpu/ixp/npe/include/IxQMgr.h4
-rw-r--r--cpu/ixp/npe/include/IxQMgrAqmIf_p.h10
-rw-r--r--cpu/ixp/npe/include/IxQueueAssignments.h2
-rw-r--r--cpu/ixp/pci.c2
-rw-r--r--cpu/ixp/start.S24
-rw-r--r--cpu/leon2/start.S22
-rw-r--r--cpu/leon3/start.S24
-rw-r--r--cpu/lh7a40x/start.S20
-rw-r--r--cpu/mcf523x/start.S2
-rw-r--r--cpu/mcf52x2/start.S6
-rw-r--r--cpu/mcf532x/start.S2
-rw-r--r--cpu/mcf5445x/start.S2
-rw-r--r--cpu/mcf547x_8x/start.S2
-rw-r--r--cpu/mips/asc_serial.c4
-rw-r--r--cpu/mips/au1x00_usb_ohci.h264
-rw-r--r--cpu/mips/incaip_wdt.S2
-rw-r--r--cpu/mips/start.S2
-rw-r--r--cpu/mpc512x/start.S2
-rw-r--r--cpu/mpc5xx/config.mk2
-rw-r--r--cpu/mpc5xx/cpu_init.c4
-rw-r--r--cpu/mpc5xx/serial.c4
-rw-r--r--cpu/mpc5xx/speed.c4
-rw-r--r--cpu/mpc5xx/spi.c18
-rw-r--r--cpu/mpc5xx/traps.c4
-rw-r--r--cpu/mpc5xx/u-boot.lds8
-rw-r--r--cpu/mpc5xxx/fec.c2
-rw-r--r--cpu/mpc5xxx/u-boot-customlayout.lds8
-rw-r--r--cpu/mpc5xxx/u-boot.lds8
-rw-r--r--cpu/mpc8220/u-boot.lds8
-rw-r--r--cpu/mpc824x/drivers/epic/epic2.S2
-rw-r--r--cpu/mpc824x/drivers/errors.h30
-rw-r--r--cpu/mpc824x/u-boot.lds8
-rw-r--r--cpu/mpc8260/i2c.c10
-rw-r--r--cpu/mpc8260/speed.h4
-rw-r--r--cpu/mpc8260/u-boot.lds8
-rw-r--r--cpu/mpc83xx/cpu_init.c2
-rw-r--r--cpu/mpc83xx/spd_sdram.c2
-rw-r--r--cpu/mpc83xx/u-boot.lds8
-rw-r--r--cpu/mpc85xx/qe_io.c2
-rw-r--r--cpu/mpc85xx/start.S2
-rw-r--r--cpu/mpc86xx/spd_sdram.c2
-rw-r--r--cpu/mpc86xx/start.S14
-rw-r--r--cpu/mpc8xx/i2c.c2
-rw-r--r--cpu/mpc8xx/scc.c2
-rw-r--r--cpu/mpc8xx/video.c4
-rw-r--r--cpu/nios/asmi.c2
-rw-r--r--cpu/nios/start.S2
-rw-r--r--cpu/nios2/start.S10
-rw-r--r--cpu/ppc4xx/4xx_pci.c2
-rw-r--r--cpu/ppc4xx/4xx_pcie.c4
-rw-r--r--cpu/ppc4xx/i2c.c2
-rw-r--r--cpu/ppc4xx/kgdb.S2
-rw-r--r--cpu/ppc4xx/speed.c2
-rw-r--r--cpu/ppc4xx/start.S58
-rw-r--r--cpu/ppc4xx/usb_ohci.c2
-rw-r--r--cpu/pxa/i2c.c8
-rw-r--r--cpu/s3c44b0/start.S4
-rw-r--r--cpu/sa1100/start.S20
-rw-r--r--cpu/sh4/cache.c4
-rw-r--r--disk/part_iso.c6
-rw-r--r--disk/part_iso.h102
-rw-r--r--doc/README-i3868
-rw-r--r--doc/README-integrator4
-rw-r--r--doc/README.RPXlite6
-rw-r--r--doc/README.adnpesc12
-rw-r--r--doc/README.adnpesc1_base324
-rw-r--r--doc/README.console6
-rw-r--r--doc/README.m54455evb4
-rw-r--r--doc/README.m68k10
-rw-r--r--doc/README.marubun-pcmcia8
-rw-r--r--doc/README.mpc8313erdb2
-rw-r--r--doc/README.mpc8349itx6
-rw-r--r--doc/README.mpc8360emds2
-rw-r--r--doc/README.mpc837xemds2
-rw-r--r--doc/README.mpc8641hpcn2
-rw-r--r--doc/README.video2
-rw-r--r--drivers/bios_emulator/bios.c4
-rw-r--r--drivers/block/Makefile6
-rw-r--r--drivers/block/sym53c8xx.c202
-rw-r--r--drivers/dma/Makefile6
-rw-r--r--drivers/i2c/Makefile6
-rw-r--r--drivers/input/Makefile6
-rw-r--r--drivers/input/keyboard.c12
-rw-r--r--drivers/misc/Makefile6
-rw-r--r--drivers/misc/ali512x.c2
-rw-r--r--drivers/mtd/at45.c26
-rw-r--r--drivers/mtd/nand/Makefile6
-rw-r--r--drivers/mtd/nand/diskonchip.c10
-rw-r--r--drivers/mtd/nand/nand_base.c20
-rw-r--r--drivers/mtd/nand/nand_bbt.c8
-rw-r--r--drivers/mtd/nand/nand_ids.c118
-rw-r--r--drivers/mtd/nand_legacy/Makefile8
-rw-r--r--drivers/mtd/nand_legacy/nand_legacy.c30
-rw-r--r--drivers/net/3c589.c6
-rw-r--r--drivers/net/3c589.h2
-rw-r--r--drivers/net/Makefile6
-rw-r--r--drivers/net/bcm570x.c2
-rw-r--r--drivers/net/bfin_mac.c2
-rw-r--r--drivers/net/dc2114x.c47
-rw-r--r--drivers/net/dm9000x.c18
-rw-r--r--drivers/net/e1000.h946
-rw-r--r--drivers/net/lan91c96.h20
-rw-r--r--drivers/net/mcffec.c2
-rw-r--r--drivers/net/natsemi.c158
-rw-r--r--drivers/net/nicext.h2
-rw-r--r--drivers/net/ns8382x.c84
-rw-r--r--drivers/net/plb2800_eth.c2
-rw-r--r--drivers/net/rtl8019.h153
-rw-r--r--drivers/net/sk98lin/h/skdebug.h4
-rw-r--r--drivers/net/sk98lin/h/skdrv2nd.h4
-rw-r--r--drivers/net/sk98lin/h/skgedrv.h18
-rw-r--r--drivers/net/sk98lin/h/skgehw.h144
-rw-r--r--drivers/net/sk98lin/h/skgei2c.h10
-rw-r--r--drivers/net/sk98lin/h/skgeinit.h2
-rw-r--r--drivers/net/sk98lin/h/skgepnm2.h2
-rw-r--r--drivers/net/sk98lin/h/skgepnmi.h417
-rw-r--r--drivers/net/sk98lin/h/skvpd.h12
-rw-r--r--drivers/net/sk98lin/h/xmac_ii.h14
-rw-r--r--drivers/net/sk98lin/skge.c80
-rw-r--r--drivers/net/sk98lin/skgeinit.c11
-rw-r--r--drivers/net/sk98lin/skgepnmi.c128
-rw-r--r--drivers/net/sk98lin/skgesirq.c6
-rw-r--r--drivers/net/sk98lin/ski2c.c4
-rw-r--r--drivers/net/sk98lin/sklm80.c2
-rw-r--r--drivers/net/sk98lin/skproc.c71
-rw-r--r--drivers/net/sk98lin/skrlmt.c4
-rw-r--r--drivers/net/sk98lin/skvpd.c4
-rw-r--r--drivers/net/sk98lin/skxmac2.c32
-rw-r--r--drivers/net/smc91111.h88
-rw-r--r--drivers/net/smc911x.c8
-rw-r--r--drivers/net/tigon3.h2
-rw-r--r--drivers/net/tsec.h182
-rw-r--r--drivers/net/uli526x.c2
-rw-r--r--drivers/pci/Makefile6
-rw-r--r--drivers/pci/pci.c8
-rw-r--r--drivers/pci/pci_indirect.c24
-rw-r--r--drivers/pci/pci_sh7780.c4
-rw-r--r--drivers/pci/w83c553f.c2
-rw-r--r--drivers/pcmcia/Makefile6
-rw-r--r--drivers/pcmcia/marubun_pcmcia.c2
-rw-r--r--drivers/pcmcia/mpc8xx_pcmcia.c12
-rw-r--r--drivers/pcmcia/tqm8xx_pcmcia.c4
-rw-r--r--drivers/qe/Makefile8
-rw-r--r--drivers/qe/qe.h96
-rw-r--r--drivers/qe/uccf.c2
-rw-r--r--drivers/qe/uec.c2
-rw-r--r--drivers/qe/uec.h2
-rw-r--r--drivers/rtc/date.c4
-rw-r--r--drivers/rtc/ds12887.c10
-rw-r--r--drivers/rtc/ds1302.c4
-rw-r--r--drivers/rtc/mc146818.c36
-rw-r--r--drivers/serial/Makefile6
-rw-r--r--drivers/serial/serial_max3100.c2
-rw-r--r--drivers/serial/serial_sh.c32
-rw-r--r--drivers/serial/usbtty.c30
-rw-r--r--drivers/serial/usbtty.h6
-rw-r--r--drivers/spi/mxc_spi.c2
-rw-r--r--drivers/usb/Makefile6
-rw-r--r--drivers/usb/isp116x-hcd.c2
-rw-r--r--drivers/usb/sl811_usb.c2
-rw-r--r--drivers/video/Makefile6
-rw-r--r--drivers/video/ati_radeon_fb.h14
-rw-r--r--examples/sched.c6
-rw-r--r--examples/smc91111_eeprom.c2
-rw-r--r--examples/timer.c2
-rw-r--r--fs/jffs2/jffs2_1pass.c18
-rw-r--r--fs/jffs2/jffs2_nand_1pass.c2
-rw-r--r--fs/reiserfs/dev.c2
-rw-r--r--fs/reiserfs/mode_string.c1
-rw-r--r--fs/reiserfs/reiserfs_private.h140
-rw-r--r--include/ACEX1K.h4
-rw-r--r--include/SA-1100.h3394
-rw-r--r--include/ahci.h10
-rw-r--r--include/armcoremodule.h10
-rw-r--r--include/asm-arm/arch-arm720t/netarm_mem_module.h18
-rw-r--r--include/asm-arm/arch-arm720t/netarm_ser_module.h32
-rw-r--r--include/asm-arm/arch-arm720t/s3c4510b.h10
-rw-r--r--include/asm-arm/arch-at91rm9200/AT91RM9200.h382
-rw-r--r--include/asm-arm/arch-at91sam9/gpio.h4
-rw-r--r--include/asm-arm/arch-ixp/ixp425.h76
-rw-r--r--include/asm-arm/arch-omap24xx/clocks.h12
-rw-r--r--include/asm-arm/arch-pxa/bitfield.h44
-rw-r--r--include/asm-arm/arch-pxa/mmc.h107
-rw-r--r--include/asm-arm/arch-s3c24x0/memory.h8
-rw-r--r--include/asm-arm/arch-sa1100/bitfield.h44
-rw-r--r--include/asm-arm/u-boot.h2
-rw-r--r--include/asm-avr32/arch-at32ap700x/mmc.h6
-rw-r--r--include/asm-blackfin/cplb.h4
-rw-r--r--include/asm-blackfin/shared_resources.h2
-rw-r--r--include/asm-i386/ic/sc520.h390
-rw-r--r--include/asm-m68k/m5249.h2
-rw-r--r--include/asm-m68k/m5282.h18
-rw-r--r--include/asm-microblaze/asm.h4
-rw-r--r--include/asm-mips/au1x00.h2
-rw-r--r--include/asm-mips/cacheops.h2
-rw-r--r--include/asm-mips/mipsregs.h30
-rw-r--r--include/asm-nios/io.h6
-rw-r--r--include/asm-ppc/4xx_pci.h2
-rw-r--r--include/asm-ppc/5xx_immap.h36
-rw-r--r--include/asm-ppc/e300.h122
-rw-r--r--include/asm-ppc/immap_85xx.h60
-rw-r--r--include/asm-ppc/immap_86xx.h6
-rw-r--r--include/asm-ppc/mmu.h4
-rw-r--r--include/asm-ppc/ppc4xx-intvec.h6
-rw-r--r--include/asm-ppc/ptrace.h2
-rw-r--r--include/asm-ppc/sigcontext.h2
-rw-r--r--include/asm-ppc/u-boot.h12
-rw-r--r--include/asm-sh/cpu_sh7750.h212
-rw-r--r--include/asm-sh/ptrace.h2
-rw-r--r--include/asm-sh/system.h32
-rw-r--r--include/bcm5221.h2
-rw-r--r--include/bedbug/ppc.h2
-rw-r--r--include/bedbug/tables.h604
-rw-r--r--include/clps7111.h2
-rw-r--r--include/command.h2
-rw-r--r--include/commproc.h26
-rw-r--r--include/config_cmd_all.h6
-rw-r--r--include/config_cmd_default.h2
-rw-r--r--include/configs/A3000.h22
-rw-r--r--include/configs/ADNPESC1.h6
-rw-r--r--include/configs/ADNPESC1_base_32.h4
-rw-r--r--include/configs/AMX860.h2
-rw-r--r--include/configs/APC405.h2
-rw-r--r--include/configs/AR405.h2
-rw-r--r--include/configs/ATUM8548.h6
-rw-r--r--include/configs/Adder.h10
-rw-r--r--include/configs/B2.h2
-rw-r--r--include/configs/CCM.h2
-rw-r--r--include/configs/CPU86.h6
-rw-r--r--include/configs/CRAYL1.h12
-rw-r--r--include/configs/CU824.h2
-rw-r--r--include/configs/DK1C20.h6
-rw-r--r--include/configs/DK1S10.h6
-rw-r--r--include/configs/DK1S10_mtx_ldk_20.h2
-rw-r--r--include/configs/DU440.h6
-rw-r--r--include/configs/EB+MCF-EV123.h10
-rw-r--r--include/configs/EP88x.h8
-rw-r--r--include/configs/ERIC.h2
-rw-r--r--include/configs/ETX094.h2
-rw-r--r--include/configs/EVB64260.h10
-rw-r--r--include/configs/EXBITGEN.h2
-rw-r--r--include/configs/FADS823.h8
-rw-r--r--include/configs/GEN860T.h86
-rw-r--r--include/configs/GENIETV.h20
-rw-r--r--include/configs/GTH.h4
-rw-r--r--include/configs/HH405.h2
-rw-r--r--include/configs/IAD210.h14
-rw-r--r--include/configs/ICU862.h8
-rw-r--r--include/configs/IPHASE4539.h2
-rw-r--r--include/configs/ISPAN.h2
-rw-r--r--include/configs/IVML24.h8
-rw-r--r--include/configs/IVMS8.h8
-rw-r--r--include/configs/IceCube.h4
-rw-r--r--include/configs/M5235EVB.h2
-rw-r--r--include/configs/M5271EVB.h2
-rw-r--r--include/configs/M5272C3.h2
-rw-r--r--include/configs/M5282EVB.h8
-rw-r--r--include/configs/M5329EVB.h2
-rw-r--r--include/configs/M5373EVB.h2
-rw-r--r--include/configs/M5475EVB.h2
-rw-r--r--include/configs/M5485EVB.h2
-rw-r--r--include/configs/MIP405.h16
-rw-r--r--include/configs/MOUSSE.h16
-rw-r--r--include/configs/MPC8313ERDB.h24
-rw-r--r--include/configs/MPC832XEMDS.h2
-rw-r--r--include/configs/MPC8349EMDS.h4
-rw-r--r--include/configs/MPC8349ITX.h26
-rw-r--r--include/configs/MPC8360ERDK.h8
-rw-r--r--include/configs/MPC8540ADS.h22
-rw-r--r--include/configs/MPC8540EVAL.h38
-rw-r--r--include/configs/MPC8541CDS.h24
-rw-r--r--include/configs/MPC8555CDS.h24
-rw-r--r--include/configs/MPC8560ADS.h30
-rw-r--r--include/configs/MPC8568MDS.h34
-rw-r--r--include/configs/MPC8610HPCD.h2
-rw-r--r--include/configs/MPC8641HPCN.h252
-rw-r--r--include/configs/MPC86xADS.h2
-rw-r--r--include/configs/MUSENKI.h2
-rw-r--r--include/configs/MVBLUE.h44
-rw-r--r--include/configs/MVS1.h31
-rw-r--r--include/configs/NC650.h10
-rw-r--r--include/configs/NETPHONE.h26
-rw-r--r--include/configs/NETTA.h32
-rw-r--r--include/configs/NETTA2.h30
-rw-r--r--include/configs/NETVIA.h8
-rw-r--r--include/configs/NSCU.h4
-rw-r--r--include/configs/NX823.h2
-rw-r--r--include/configs/P3G4.h6
-rw-r--r--include/configs/PATI.h42
-rw-r--r--include/configs/PCI5441.h14
-rw-r--r--include/configs/PIP405.h4
-rw-r--r--include/configs/PM520.h2
-rw-r--r--include/configs/PM826.h6
-rw-r--r--include/configs/PM856.h22
-rw-r--r--include/configs/PN62.h14
-rw-r--r--include/configs/QS823.h4
-rw-r--r--include/configs/QS850.h4
-rw-r--r--include/configs/R360MPI.h6
-rw-r--r--include/configs/RBC823.h6
-rw-r--r--include/configs/RPXClassic.h8
-rw-r--r--include/configs/RPXlite.h10
-rw-r--r--include/configs/RRvision.h2
-rw-r--r--include/configs/Rattler.h14
-rw-r--r--include/configs/SBC8540.h2
-rw-r--r--include/configs/SCM.h8
-rw-r--r--include/configs/SL8245.h4
-rw-r--r--include/configs/SM850.h6
-rw-r--r--include/configs/SXNI855T.h4
-rw-r--r--include/configs/TOP5200.h2
-rw-r--r--include/configs/TOP860.h10
-rw-r--r--include/configs/TQM834x.h4
-rw-r--r--include/configs/Total5200.h2
-rw-r--r--include/configs/VCMA9.h12
-rw-r--r--include/configs/VoVPN-GW.h2
-rw-r--r--include/configs/W7OLMC.h8
-rw-r--r--include/configs/W7OLMG.h8
-rw-r--r--include/configs/ZPC1900.h14
-rw-r--r--include/configs/ads5121.h2
-rw-r--r--include/configs/adsvix.h2
-rw-r--r--[-rwxr-xr-x]include/configs/apollon.h2
-rw-r--r--include/configs/armadillo.h6
-rw-r--r--include/configs/atc.h8
-rw-r--r--include/configs/barco.h14
-rw-r--r--include/configs/bf533-stamp.h8
-rw-r--r--include/configs/bf537-stamp.h14
-rw-r--r--include/configs/bf561-ezkit.h17
-rw-r--r--include/configs/bubinga.h2
-rw-r--r--include/configs/c2mon.h6
-rw-r--r--include/configs/canmb.h4
-rw-r--r--include/configs/cerf250.h36
-rw-r--r--include/configs/cmi_mpc5xx.h46
-rw-r--r--include/configs/cobra5272.h4
-rw-r--r--include/configs/csb226.h2
-rw-r--r--include/configs/csb272.h4
-rw-r--r--include/configs/csb472.h4
-rw-r--r--include/configs/davinci_dvevm.h6
-rw-r--r--include/configs/davinci_schmoogie.h2
-rw-r--r--include/configs/davinci_sonata.h6
-rw-r--r--include/configs/dnp1110.h2
-rw-r--r--include/configs/ep7312.h6
-rw-r--r--include/configs/ep8248.h14
-rw-r--r--include/configs/ep8260.h20
-rw-r--r--include/configs/ep82xxm.h16
-rw-r--r--include/configs/evb4510.h2
-rw-r--r--include/configs/gr_cpci_ax2000.h2
-rw-r--r--include/configs/gr_ep2s60.h4
-rw-r--r--include/configs/gr_xc3s_1500.h2
-rw-r--r--include/configs/grsim.h2
-rw-r--r--include/configs/grsim_leon2.h2
-rw-r--r--include/configs/hcu4.h4
-rw-r--r--include/configs/hcu5.h20
-rw-r--r--include/configs/hermes.h10
-rw-r--r--include/configs/idmr.h2
-rw-r--r--include/configs/impa7.h4
-rw-r--r--include/configs/innokom.h10
-rw-r--r--include/configs/integratorcp.h6
-rw-r--r--include/configs/ixdp425.h6
-rw-r--r--include/configs/ixdpg425.h6
-rw-r--r--include/configs/jupiter.h2
-rw-r--r--include/configs/kilauea.h2
-rw-r--r--include/configs/korat.h6
-rw-r--r--include/configs/lart.h2
-rw-r--r--include/configs/linkstation.h26
-rw-r--r--include/configs/logodl.h2
-rw-r--r--include/configs/makalu.h2
-rw-r--r--include/configs/mcu25.h10
-rw-r--r--include/configs/mecp5200.h2
-rw-r--r--include/configs/mgcoge.h14
-rw-r--r--include/configs/modnet50.h3
-rw-r--r--include/configs/ms7720se.h2
-rw-r--r--include/configs/ms7722se.h8
-rw-r--r--include/configs/ms7750se.h8
-rw-r--r--include/configs/netstar.h8
-rw-r--r--include/configs/ns9750dev.h4
-rw-r--r--include/configs/p3mx.h4
-rw-r--r--include/configs/pcu_e.h4
-rw-r--r--include/configs/pdnb3.h4
-rw-r--r--include/configs/ppmc8260.h2
-rw-r--r--include/configs/r7780mp.h2
-rw-r--r--include/configs/rmu.h8
-rw-r--r--include/configs/rsdproto.h14
-rw-r--r--include/configs/sacsng.h2
-rw-r--r--include/configs/sbc2410x.h6
-rw-r--r--include/configs/sbc8260.h2
-rw-r--r--include/configs/sbc8548.h2
-rw-r--r--include/configs/sbc8641d.h24
-rw-r--r--include/configs/sc520_cdp.h2
-rw-r--r--include/configs/sc520_spunk.h8
-rw-r--r--include/configs/sequoia.h6
-rw-r--r--include/configs/shannon.h2
-rw-r--r--include/configs/smdk2400.h8
-rw-r--r--include/configs/smdk2410.h2
-rw-r--r--include/configs/sorcery.h10
-rw-r--r--include/configs/stxgp3.h60
-rw-r--r--include/configs/stxssa.h16
-rw-r--r--include/configs/stxxtc.h18
-rw-r--r--include/configs/svm_sc8xx.h10
-rw-r--r--include/configs/taihu.h2
-rw-r--r--include/configs/trab.h6
-rw-r--r--include/configs/trizepsiv.h6
-rw-r--r--include/configs/uc100.h2
-rw-r--r--include/configs/utx8245.h6
-rw-r--r--include/configs/v37.h10
-rw-r--r--include/configs/versatile.h2
-rw-r--r--include/configs/wepep250.h6
-rw-r--r--include/configs/xaeniax.h2
-rw-r--r--include/configs/xupv2p.h10
-rw-r--r--include/div64.h8
-rw-r--r--include/dm9161.h4
-rw-r--r--include/elf.h8
-rw-r--r--include/fat.h2
-rw-r--r--include/flash.h4
-rw-r--r--include/fpga.h42
-rw-r--r--include/galileo/gt64260R.h2012
-rw-r--r--include/i2c.h8
-rw-r--r--include/libfdt.h22
-rw-r--r--include/linux/mtd/bbm.h4
-rw-r--r--include/linux/mtd/doc2000.h70
-rw-r--r--include/linux/mtd/mtd-abi.h4
-rw-r--r--include/linux/mtd/mtd.h4
-rw-r--r--include/linux/mtd/nand_legacy.h10
-rw-r--r--include/linux/mtd/nftl.h6
-rw-r--r--include/lists.h4
-rw-r--r--include/lxt971a.h128
-rw-r--r--include/mpc106.h12
-rw-r--r--include/net.h18
-rw-r--r--include/nios2-epcs.h2
-rw-r--r--include/nios2-io.h6
-rw-r--r--include/ns7520_eth.h8
-rw-r--r--include/ns9750_bbus.h22
-rw-r--r--include/ns9750_eth.h268
-rw-r--r--include/ns9750_mem.h46
-rw-r--r--include/ns9750_ser.h26
-rw-r--r--include/ns9750_sys.h38
-rw-r--r--include/pc_keyb.h12
-rw-r--r--include/ppc405.h1726
-rw-r--r--include/ppc440.h2
-rw-r--r--include/ppc4xx_enet.h4
-rw-r--r--include/rtc.h2
-rw-r--r--include/s_record.h6
-rw-r--r--include/scsi.h6
-rw-r--r--include/sed13806.h2
-rw-r--r--include/spartan2.h16
-rw-r--r--include/spartan3.h22
-rw-r--r--include/sym53c8xx.h8
-rw-r--r--include/usbdcore_mpc8xx.h2
-rw-r--r--include/video_easylogo.h2
-rw-r--r--include/video_logo.h6
-rw-r--r--include/virtex2.h6
-rw-r--r--include/xilinx.h68
-rw-r--r--lib_arm/Makefile2
-rw-r--r--lib_arm/_udivsi3.S2
-rw-r--r--lib_arm/_umodsi3.S6
-rw-r--r--lib_blackfin/Makefile2
-rw-r--r--lib_generic/Makefile2
-rw-r--r--lib_generic/string.c2
-rw-r--r--lib_generic/zlib.c2
-rw-r--r--lib_i386/Makefile2
-rw-r--r--lib_i386/bios.S12
-rw-r--r--lib_i386/bios.h2
-rw-r--r--lib_i386/bios_pci.S54
-rw-r--r--lib_i386/pci.c4
-rw-r--r--lib_i386/pci_type1.c16
-rw-r--r--lib_i386/realmode_switch.S60
-rw-r--r--lib_m68k/Makefile2
-rw-r--r--lib_m68k/board.c2
-rw-r--r--lib_microblaze/Makefile2
-rw-r--r--lib_mips/Makefile2
-rw-r--r--lib_nios/Makefile2
-rw-r--r--lib_nios/math.h2
-rw-r--r--lib_nios2/Makefile2
-rw-r--r--lib_nios2/math.h2
-rw-r--r--lib_ppc/Makefile2
-rw-r--r--lib_sh/Makefile2
-rw-r--r--lib_sparc/Makefile2
-rw-r--r--libfdt/Makefile2
-rw-r--r--libfdt/README4
-rw-r--r--net/net.c6
-rw-r--r--post/drivers/memory.c2
-rw-r--r--post/lib_ppc/andi.c8
-rw-r--r--post/lib_ppc/cmp.c2
-rw-r--r--post/lib_ppc/cmpi.c2
-rw-r--r--post/lib_ppc/cpu_asm.h2
-rw-r--r--post/lib_ppc/rlwimi.c28
-rw-r--r--post/lib_ppc/rlwinm.c28
-rw-r--r--post/lib_ppc/rlwnm.c28
-rw-r--r--post/lib_ppc/srawi.c30
-rw-r--r--post/lib_ppc/three.c60
-rw-r--r--post/lib_ppc/threei.c14
-rw-r--r--post/lib_ppc/threex.c50
-rw-r--r--post/lib_ppc/twox.c38
-rw-r--r--post/rules.mk2
-rw-r--r--tools/Makefile2
-rw-r--r--tools/easylogo/easylogo.c2
-rw-r--r--tools/env/fw_env.h6
-rw-r--r--tools/gdb/remote.c2
1010 files changed, 13530 insertions, 13519 deletions
diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
index b472176..3bbc09d 100644
--- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
+++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
@@ -14,7 +14,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -30,48 +30,48 @@
#include "memio.h"
#include "via686.h"
-__asm__(" .globl send_kb \n "
- "send_kb: \n "
- " lis r9, 0xfe00 \n "
- " \n "
- " li r4, 0x10 # retries \n "
- " mtctr r4 \n "
- " \n "
- "idle: \n "
- " lbz r4, 0x64(r9) \n "
- " andi. r4, r4, 0x02 \n "
- " bne idle \n "
-
- "ready: \n "
- " stb r3, 0x60(r9) \n "
- " \n "
- "check: \n "
- " lbz r4, 0x64(r9) \n "
- " andi. r4, r4, 0x01 \n "
- " beq check \n "
- " \n "
- " lbz r4, 0x60(r9) \n "
- " cmpwi r4, 0xfa \n "
- " beq done \n "
-
- " bdnz idle \n "
-
- " li r3, 0 \n "
- " blr \n "
-
- "done: \n "
- " li r3, 1 \n "
- " blr \n "
-
- ".globl test_kb \n "
- "test_kb: \n "
- " mflr r10 \n "
- " li r3, 0xed \n "
- " bl send_kb \n "
- " li r3, 0x01 \n "
- " bl send_kb \n "
- " mtlr r10 \n "
- " blr "
+__asm__(" .globl send_kb \n "
+ "send_kb: \n "
+ " lis r9, 0xfe00 \n "
+ " \n "
+ " li r4, 0x10 # retries \n "
+ " mtctr r4 \n "
+ " \n "
+ "idle: \n "
+ " lbz r4, 0x64(r9) \n "
+ " andi. r4, r4, 0x02 \n "
+ " bne idle \n "
+
+ "ready: \n "
+ " stb r3, 0x60(r9) \n "
+ " \n "
+ "check: \n "
+ " lbz r4, 0x64(r9) \n "
+ " andi. r4, r4, 0x01 \n "
+ " beq check \n "
+ " \n "
+ " lbz r4, 0x60(r9) \n "
+ " cmpwi r4, 0xfa \n "
+ " beq done \n "
+
+ " bdnz idle \n "
+
+ " li r3, 0 \n "
+ " blr \n "
+
+ "done: \n "
+ " li r3, 1 \n "
+ " blr \n "
+
+ ".globl test_kb \n "
+ "test_kb: \n "
+ " mflr r10 \n "
+ " li r3, 0xed \n "
+ " bl send_kb \n "
+ " li r3, 0x01 \n "
+ " bl send_kb \n "
+ " mtlr r10 \n "
+ " blr \n "
);
diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c
index ad2bcde..5a90cc5 100644
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@@ -90,8 +90,8 @@
#define DMADone (1<<8)
#define DownComplete (1<<9)
#define UpComplete (1<<10)
-#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
-#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
+#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
+#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
/* Polling Registers */
@@ -100,17 +100,17 @@
/* Register window 0 offets */
-#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
-#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
-#define IntrStatus 0x0E /* Valid in all windows. */
+#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
+#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
+#define IntrStatus 0x0E /* Valid in all windows. */
/* Register window 0 EEPROM bits */
#define EEPROM_Read 0x80
#define EEPROM_WRITE 0x40
#define EEPROM_ERASE 0xC0
-#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
-#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
+#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
+#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
/* EEPROM locations. */
@@ -135,7 +135,7 @@
#define RxStatus 0x18
#define Timer 0x1A
#define TxStatus 0x1B
-#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
+#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
/* Register Window 2 */
@@ -143,23 +143,23 @@
/* Register Window 3: MAC/config bits */
-#define Wn3_Config 0 /* Internal Configuration */
+#define Wn3_Config 0 /* Internal Configuration */
#define Wn3_MAC_Ctrl 6
#define Wn3_Options 8
#define BFEXT(value, offset, bitcount) \
((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
-#define BFINS(lhs, rhs, offset, bitcount) \
+#define BFINS(lhs, rhs, offset, bitcount) \
(((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
(((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
-#define RAM_SIZE(v) BFEXT(v, 0, 3)
+#define RAM_SIZE(v) BFEXT(v, 0, 3)
#define RAM_WIDTH(v) BFEXT(v, 3, 1)
-#define RAM_SPEED(v) BFEXT(v, 4, 2)
-#define ROM_SIZE(v) BFEXT(v, 6, 2)
+#define RAM_SPEED(v) BFEXT(v, 4, 2)
+#define ROM_SIZE(v) BFEXT(v, 6, 2)
#define RAM_SPLIT(v) BFEXT(v, 16, 2)
-#define XCVR(v) BFEXT(v, 20, 4)
+#define XCVR(v) BFEXT(v, 20, 4)
#define AUTOSELECT(v) BFEXT(v, 24, 1)
/* Register Window 4: Xcvr/media bits */
@@ -186,20 +186,20 @@
#define DownListPtr 0x24
#define FragAddr 0x28
#define FragLen 0x2c
-#define TxFreeThreshold 0x2f
+#define TxFreeThreshold 0x2f
#define UpPktStatus 0x30
-#define UpListPtr 0x38
+#define UpListPtr 0x38
/* The Rx and Tx descriptor lists. */
-#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */
-#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */
+#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */
+#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */
struct rx_desc_3com {
- u32 next; /* Last entry points to 0 */
- u32 status; /* FSH -> Frame Start Header */
- u32 addr; /* Up to 63 addr/len pairs possible */
- u32 length; /* Set LAST_FRAG to indicate last pair */
+ u32 next; /* Last entry points to 0 */
+ u32 status; /* FSH -> Frame Start Header */
+ u32 addr; /* Up to 63 addr/len pairs possible */
+ u32 length; /* Set LAST_FRAG to indicate last pair */
};
/* Values for the Rx status entry. */
@@ -214,8 +214,8 @@ struct rx_desc_3com {
#define UDPChksumValid (1<<31)
struct tx_desc_3com {
- u32 next; /* Last entry points to 0 */
- u32 status; /* bits 0:12 length, others see below */
+ u32 next; /* Last entry points to 0 */
+ u32 status; /* bits 0:12 length, others see below */
u32 addr;
u32 length;
};
@@ -227,7 +227,7 @@ struct tx_desc_3com {
#define AddIPChksum 0x02000000
#define AddTCPChksum 0x04000000
#define AddUDPChksum 0x08000000
-#define TxIntrUploaded 0x80000000 /* IRQ when in FIFO, but maybe not sent. */
+#define TxIntrUploaded 0x80000000 /* IRQ when in FIFO, but maybe not sent. */
/* XCVR Types */
@@ -240,19 +240,19 @@ struct tx_desc_3com {
#define XCVR_MII 6
#define XCVR_NWAY 8
#define XCVR_ExtMII 9
-#define XCVR_Default 10 /* I don't think this is correct -> should have been 0x10 if Auto Negotiate */
+#define XCVR_Default 10 /* I don't think this is correct -> should have been 0x10 if Auto Negotiate */
-struct descriptor { /* A generic descriptor. */
- u32 next; /* Last entry points to 0 */
- u32 status; /* FSH -> Frame Start Header */
- u32 addr; /* Up to 63 addr/len pairs possible */
- u32 length; /* Set LAST_FRAG to indicate last pair */
+struct descriptor { /* A generic descriptor. */
+ u32 next; /* Last entry points to 0 */
+ u32 status; /* FSH -> Frame Start Header */
+ u32 addr; /* Up to 63 addr/len pairs possible */
+ u32 length; /* Set LAST_FRAG to indicate last pair */
};
/* Misc. definitions */
-#define NUM_RX_DESC PKTBUFSRX * 10
-#define NUM_TX_DESC 1 /* Number of TX descriptors */
+#define NUM_RX_DESC PKTBUFSRX * 10
+#define NUM_TX_DESC 1 /* Number of TX descriptors */
#define TOUT_LOOP 1000000
@@ -266,17 +266,17 @@ struct descriptor { /* A generic descriptor. */
#undef ETH_DEBUG
#ifdef ETH_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
+#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
-static struct rx_desc_3com *rx_ring; /* RX descriptor ring */
-static struct tx_desc_3com *tx_ring; /* TX descriptor ring */
-static u8 rx_buffer[NUM_RX_DESC][PKTSIZE_ALIGN]; /* storage for the incoming messages */
-static int rx_next = 0; /* RX descriptor ring pointer */
-static int tx_next = 0; /* TX descriptor ring pointer */
+static struct rx_desc_3com *rx_ring; /* RX descriptor ring */
+static struct tx_desc_3com *tx_ring; /* TX descriptor ring */
+static u8 rx_buffer[NUM_RX_DESC][PKTSIZE_ALIGN];/* storage for the incoming messages */
+static int rx_next = 0; /* RX descriptor ring pointer */
+static int tx_next = 0; /* TX descriptor ring pointer */
static int tx_threshold;
static void init_rx_ring(struct eth_device* dev);
@@ -369,171 +369,163 @@ static int issue_and_wait(struct eth_device* dev, int command)
return 0;
}
-/* Determine network media type and set up 3com accordingly */
+/* Determine network media type and set up 3com accordingly */
/* I think I'm going to start with something known first like 10baseT */
-static int auto_negotiate(struct eth_device* dev)
+static int auto_negotiate (struct eth_device *dev)
{
- int i;
+ int i;
- EL3WINDOW(dev, 1);
+ EL3WINDOW (dev, 1);
- /* Wait for Auto negotiation to complete */
- for (i = 0; i <= 1000; i++)
- {
- if (ETH_INW(dev, 2) & 0x04)
- break;
- udelay(100);
+ /* Wait for Auto negotiation to complete */
+ for (i = 0; i <= 1000; i++) {
+ if (ETH_INW (dev, 2) & 0x04)
+ break;
+ udelay (100);
- if (i == 1000)
- {
- PRINTF("Error: Auto negotiation failed\n");
- return 0;
+ if (i == 1000) {
+ PRINTF ("Error: Auto negotiation failed\n");
+ return 0;
+ }
}
- }
- return 1;
+ return 1;
}
-void eth_interrupt(struct eth_device *dev)
+void eth_interrupt (struct eth_device *dev)
{
- u16 status = ETH_STATUS(dev);
+ u16 status = ETH_STATUS (dev);
- printf("eth0: status = 0x%04x\n", status);
+ printf ("eth0: status = 0x%04x\n", status);
- if (!(status & IntLatch))
- return;
+ if (!(status & IntLatch))
+ return;
+
+ if (status & (1 << 6)) {
+ ETH_CMD (dev, AckIntr | (1 << 6));
+ printf ("Acknowledged Interrupt command\n");
+ }
+
+ if (status & DownComplete) {
+ ETH_CMD (dev, AckIntr | DownComplete);
+ printf ("Acknowledged DownComplete\n");
+ }
+
+ if (status & UpComplete) {
+ ETH_CMD (dev, AckIntr | UpComplete);
+ printf ("Acknowledged UpComplete\n");
+ }
- if (status & (1<<6))
- {
- ETH_CMD(dev, AckIntr | (1<<6));
- printf("Acknowledged Interrupt command\n");
- }
-
- if (status & DownComplete)
- {
- ETH_CMD(dev, AckIntr | DownComplete);
- printf("Acknowledged DownComplete\n");
- }
-
- if (status & UpComplete)
- {
- ETH_CMD(dev, AckIntr | UpComplete);
- printf("Acknowledged UpComplete\n");
- }
-
- ETH_CMD(dev, AckIntr | IntLatch);
- printf("Acknowledged IntLatch\n");
+ ETH_CMD (dev, AckIntr | IntLatch);
+ printf ("Acknowledged IntLatch\n");
}
-int eth_3com_initialize(bd_t *bis)
+int eth_3com_initialize (bd_t * bis)
{
u32 eth_iobase = 0, status;
int card_number = 0, ret;
- struct eth_device* dev;
+ struct eth_device *dev;
pci_dev_t devno;
char *s;
- s = getenv("3com_base");
+ s = getenv ("3com_base");
/* Find ethernet controller on the PCI bus */
- if ((devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0)) < 0)
- {
- PRINTF("Error: Cannot find the ethernet device on the PCI bus\n");
+ if ((devno =
+ pci_find_device (PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C,
+ 0)) < 0) {
+ PRINTF ("Error: Cannot find the ethernet device on the PCI bus\n");
goto Done;
}
- if (s)
- {
- unsigned long base = atoi(s);
- pci_write_config_dword(devno, PCI_BASE_ADDRESS_0, base | 0x01);
+ if (s) {
+ unsigned long base = atoi (s);
+
+ pci_write_config_dword (devno, PCI_BASE_ADDRESS_0,
+ base | 0x01);
}
- ret = pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &eth_iobase);
+ ret = pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &eth_iobase);
eth_iobase &= ~0xf;
- PRINTF("eth: 3Com Found at Address: 0x%x\n", eth_iobase);
+ PRINTF ("eth: 3Com Found at Address: 0x%x\n", eth_iobase);
- pci_write_config_dword(devno, PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ pci_write_config_dword (devno, PCI_COMMAND,
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER);
- /* Check if I/O accesses and Bus Mastering are enabled */
+ /* Check if I/O accesses and Bus Mastering are enabled */
- ret = pci_read_config_dword(devno, PCI_COMMAND, &status);
+ ret = pci_read_config_dword (devno, PCI_COMMAND, &status);
- if (!(status & PCI_COMMAND_IO))
- {
- printf("Error: Cannot enable IO access.\n");
+ if (!(status & PCI_COMMAND_IO)) {
+ printf ("Error: Cannot enable IO access.\n");
goto Done;
}
- if (!(status & PCI_COMMAND_MEMORY))
- {
- printf("Error: Cannot enable MEMORY access.\n");
+ if (!(status & PCI_COMMAND_MEMORY)) {
+ printf ("Error: Cannot enable MEMORY access.\n");
goto Done;
}
- if (!(status & PCI_COMMAND_MASTER))
- {
- printf("Error: Cannot enable Bus Mastering.\n");
+ if (!(status & PCI_COMMAND_MASTER)) {
+ printf ("Error: Cannot enable Bus Mastering.\n");
goto Done;
}
- dev = (struct eth_device*) malloc(sizeof(*dev)); /*struct eth_device)); */
+ dev = (struct eth_device *) malloc (sizeof (*dev)); /*struct eth_device)); */
- sprintf(dev->name, "3Com 3c920c#%d", card_number);
+ sprintf (dev->name, "3Com 3c920c#%d", card_number);
dev->iobase = eth_iobase;
- dev->priv = (void*) devno;
- dev->init = eth_3com_init;
- dev->halt = eth_3com_halt;
- dev->send = eth_3com_send;
- dev->recv = eth_3com_recv;
+ dev->priv = (void *) devno;
+ dev->init = eth_3com_init;
+ dev->halt = eth_3com_halt;
+ dev->send = eth_3com_send;
+ dev->recv = eth_3com_recv;
- eth_register(dev);
+ eth_register (dev);
-/* { */
-/* char interrupt; */
-/* devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0); */
-/* pci_read_config_byte(devno, PCI_INTERRUPT_LINE, &interrupt); */
+/* { */
+/* char interrupt; */
+/* devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0); */
+/* pci_read_config_byte(devno, PCI_INTERRUPT_LINE, &interrupt); */
-/* printf("Installing eth0 interrupt handler to %d\n", interrupt); */
-/* irq_install_handler(interrupt, eth_interrupt, dev); */
-/* } */
+/* printf("Installing eth0 interrupt handler to %d\n", interrupt); */
+/* irq_install_handler(interrupt, eth_interrupt, dev); */
+/* } */
card_number++;
/* Set the latency timer for value */
- s = getenv("3com_latency");
- if (s)
- {
- ret = pci_write_config_byte(devno, PCI_LATENCY_TIMER, (unsigned char)atoi(s));
- }
- else ret = pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x0a);
+ s = getenv ("3com_latency");
+ if (s) {
+ ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER,
+ (unsigned char) atoi (s));
+ } else
+ ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x0a);
- read_hw_addr(dev, bis); /* get the MAC address from Window 2*/
+ read_hw_addr (dev, bis); /* get the MAC address from Window 2 */
/* Reset the ethernet controller */
PRINTF ("Issuing reset command....\n");
- if (!issue_and_wait(dev, TotalReset))
- {
- printf("Error: Cannot reset ethernet controller.\n");
+ if (!issue_and_wait (dev, TotalReset)) {
+ printf ("Error: Cannot reset ethernet controller.\n");
goto Done;
- }
- else
+ } else
PRINTF ("Ethernet controller reset.\n");
/* allocate memory for rx and tx rings */
- if(!(rx_ring = memalign(sizeof(struct rx_desc_3com) * NUM_RX_DESC, 16)))
- {
+ if (!(rx_ring = memalign (sizeof (struct rx_desc_3com) * NUM_RX_DESC, 16))) {
PRINTF ("Cannot allocate memory for RX_RING.....\n");
goto Done;
}
- if (!(tx_ring = memalign(sizeof(struct tx_desc_3com) * NUM_TX_DESC, 16)))
- {
+ if (!(tx_ring = memalign (sizeof (struct tx_desc_3com) * NUM_TX_DESC, 16))) {
PRINTF ("Cannot allocate memory for TX_RING.....\n");
goto Done;
}
@@ -543,219 +535,208 @@ Done:
}
-static int eth_3com_init(struct eth_device* dev, bd_t *bis)
+static int eth_3com_init (struct eth_device *dev, bd_t * bis)
{
int i, status = 0;
int tx_cur, loop;
u16 status_enable, intr_enable;
struct descriptor *ias_cmd;
- /* Determine what type of network the machine is connected to */
- /* presently drops the connect to 10Mbps */
+ /* Determine what type of network the machine is connected to */
+ /* presently drops the connect to 10Mbps */
- if (!auto_negotiate(dev))
- {
- printf("Error: Cannot determine network media.\n");
+ if (!auto_negotiate (dev)) {
+ printf ("Error: Cannot determine network media.\n");
goto Done;
}
- issue_and_wait(dev, TxReset);
- issue_and_wait(dev, RxReset|0x04);
+ issue_and_wait (dev, TxReset);
+ issue_and_wait (dev, RxReset | 0x04);
/* Switch to register set 7 for normal use. */
- EL3WINDOW(dev, 7);
+ EL3WINDOW (dev, 7);
/* Initialize Rx and Tx rings */
- init_rx_ring(dev);
- purge_tx_ring(dev);
+ init_rx_ring (dev);
+ purge_tx_ring (dev);
- ETH_CMD(dev, SetRxFilter | RxStation | RxBroadcast | RxProm);
+ ETH_CMD (dev, SetRxFilter | RxStation | RxBroadcast | RxProm);
- issue_and_wait(dev,SetTxStart|0x07ff);
+ issue_and_wait (dev, SetTxStart | 0x07ff);
/* Below sets which indication bits to be seen. */
- status_enable = SetStatusEnb | HostError | DownComplete | UpComplete | (1<<6);
- ETH_CMD(dev, status_enable);
+ status_enable =
+ SetStatusEnb | HostError | DownComplete | UpComplete | (1 <<
+ 6);
+ ETH_CMD (dev, status_enable);
/* Below sets no bits are to cause an interrupt since this is just polling */
- intr_enable = SetIntrEnb;
+ intr_enable = SetIntrEnb;
/* intr_enable = SetIntrEnb | (1<<9) | (1<<10) | (1<<6); */
- ETH_CMD(dev, intr_enable);
- ETH_OUTB(dev, 127, UpPoll);
+ ETH_CMD (dev, intr_enable);
+ ETH_OUTB (dev, 127, UpPoll);
/* Ack all pending events, and set active indicator mask */
- ETH_CMD(dev, AckIntr | IntLatch | TxAvailable | RxEarly | IntReq);
- ETH_CMD(dev, intr_enable);
+ ETH_CMD (dev, AckIntr | IntLatch | TxAvailable | RxEarly | IntReq);
+ ETH_CMD (dev, intr_enable);
/* Tell the adapter where the RX ring is located */
- issue_and_wait(dev,UpStall); /* Stall and set the UplistPtr */
- ETH_OUTL(dev, (u32)&rx_ring[rx_next], UpListPtr);
- ETH_CMD(dev, RxEnable); /* Enable the receiver. */
- issue_and_wait(dev,UpUnstall);
+ issue_and_wait (dev, UpStall); /* Stall and set the UplistPtr */
+ ETH_OUTL (dev, (u32) & rx_ring[rx_next], UpListPtr);
+ ETH_CMD (dev, RxEnable); /* Enable the receiver. */
+ issue_and_wait (dev, UpUnstall);
/* Send the Individual Address Setup frame */
- tx_cur = tx_next;
- tx_next = ((tx_next+1) % NUM_TX_DESC);
+ tx_cur = tx_next;
+ tx_next = ((tx_next + 1) % NUM_TX_DESC);
- ias_cmd = (struct descriptor *)&tx_ring[tx_cur];
- ias_cmd->status = cpu_to_le32(1<<31); /* set DnIndicate bit. */
- ias_cmd->next = 0;
- ias_cmd->addr = cpu_to_le32((u32)&bis->bi_enetaddr[0]);
- ias_cmd->length = cpu_to_le32(6 | LAST_FRAG);
+ ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
+ ias_cmd->status = cpu_to_le32 (1 << 31); /* set DnIndicate bit. */
+ ias_cmd->next = 0;
+ ias_cmd->addr = cpu_to_le32 ((u32) & bis->bi_enetaddr[0]);
+ ias_cmd->length = cpu_to_le32 (6 | LAST_FRAG);
/* Tell the adapter where the TX ring is located */
- ETH_CMD(dev, TxEnable); /* Enable transmitter. */
- issue_and_wait(dev, DownStall); /* Stall and set the DownListPtr. */
- ETH_OUTL(dev, (u32)&tx_ring[tx_cur], DownListPtr);
- issue_and_wait(dev, DownUnstall);
- for (i=0; !(ETH_STATUS(dev) & DownComplete); i++)
- {
- if (i >= TOUT_LOOP)
- {
- PRINTF("TX Ring status (Init): 0x%4x\n", le32_to_cpu(tx_ring[tx_cur].status));
- PRINTF("ETH_STATUS: 0x%x\n", ETH_STATUS(dev));
+ ETH_CMD (dev, TxEnable); /* Enable transmitter. */
+ issue_and_wait (dev, DownStall); /* Stall and set the DownListPtr. */
+ ETH_OUTL (dev, (u32) & tx_ring[tx_cur], DownListPtr);
+ issue_and_wait (dev, DownUnstall);
+ for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) {
+ if (i >= TOUT_LOOP) {
+ PRINTF ("TX Ring status (Init): 0x%4x\n",
+ le32_to_cpu (tx_ring[tx_cur].status));
+ PRINTF ("ETH_STATUS: 0x%x\n", ETH_STATUS (dev));
goto Done;
}
}
- if (ETH_STATUS(dev) & DownComplete) /* If DownLoad Complete ACK the bit */
- {
- ETH_CMD(dev, AckIntr | DownComplete); /* acknowledge the indication bit */
- issue_and_wait(dev, DownStall); /* stall and clear DownListPtr */
- ETH_OUTL(dev, 0, DownListPtr);
- issue_and_wait(dev, DownUnstall);
+ if (ETH_STATUS (dev) & DownComplete) { /* If DownLoad Complete ACK the bit */
+ ETH_CMD (dev, AckIntr | DownComplete); /* acknowledge the indication bit */
+ issue_and_wait (dev, DownStall); /* stall and clear DownListPtr */
+ ETH_OUTL (dev, 0, DownListPtr);
+ issue_and_wait (dev, DownUnstall);
}
status = 1;
-
Done:
return status;
}
-int eth_3com_send(struct eth_device* dev, volatile void *packet, int length)
+int eth_3com_send (struct eth_device *dev, volatile void *packet, int length)
{
int i, status = 0;
int tx_cur;
- if (length <= 0)
- {
- PRINTF("eth: bad packet size: %d\n", length);
+ if (length <= 0) {
+ PRINTF ("eth: bad packet size: %d\n", length);
goto Done;
}
- tx_cur = tx_next;
- tx_next = (tx_next+1) % NUM_TX_DESC;
+ tx_cur = tx_next;
+ tx_next = (tx_next + 1) % NUM_TX_DESC;
- tx_ring[tx_cur].status = cpu_to_le32(1<<31); /* set DnIndicate bit */
- tx_ring[tx_cur].next = 0;
- tx_ring[tx_cur].addr = cpu_to_le32(((u32) packet));
- tx_ring[tx_cur].length = cpu_to_le32(length | LAST_FRAG);
+ tx_ring[tx_cur].status = cpu_to_le32 (1 << 31); /* set DnIndicate bit */
+ tx_ring[tx_cur].next = 0;
+ tx_ring[tx_cur].addr = cpu_to_le32 (((u32) packet));
+ tx_ring[tx_cur].length = cpu_to_le32 (length | LAST_FRAG);
/* Send the packet */
- issue_and_wait(dev, DownStall); /* stall and set the DownListPtr */
- ETH_OUTL(dev, (u32) &tx_ring[tx_cur], DownListPtr);
- issue_and_wait(dev, DownUnstall);
+ issue_and_wait (dev, DownStall); /* stall and set the DownListPtr */
+ ETH_OUTL (dev, (u32) & tx_ring[tx_cur], DownListPtr);
+ issue_and_wait (dev, DownUnstall);
- for (i=0; !(ETH_STATUS(dev) & DownComplete); i++)
- {
- if (i >= TOUT_LOOP)
- {
- PRINTF("TX Ring status (send): 0x%4x\n", le32_to_cpu(tx_ring[tx_cur].status));
+ for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) {
+ if (i >= TOUT_LOOP) {
+ PRINTF ("TX Ring status (send): 0x%4x\n",
+ le32_to_cpu (tx_ring[tx_cur].status));
goto Done;
}
}
- if (ETH_STATUS(dev) & DownComplete) /* If DownLoad Complete ACK the bit */
- {
- ETH_CMD(dev, AckIntr | DownComplete); /* acknowledge the indication bit */
- issue_and_wait(dev, DownStall); /* stall and clear DownListPtr */
- ETH_OUTL(dev, 0, DownListPtr);
- issue_and_wait(dev, DownUnstall);
+ if (ETH_STATUS (dev) & DownComplete) { /* If DownLoad Complete ACK the bit */
+ ETH_CMD (dev, AckIntr | DownComplete); /* acknowledge the indication bit */
+ issue_and_wait (dev, DownStall); /* stall and clear DownListPtr */
+ ETH_OUTL (dev, 0, DownListPtr);
+ issue_and_wait (dev, DownUnstall);
}
- status=1;
- Done:
+ status = 1;
+Done:
return status;
}
-void PrintPacket (uchar *packet, int length)
+void PrintPacket (uchar * packet, int length)
{
-int loop;
-uchar *ptr;
+ int loop;
+ uchar *ptr;
printf ("Printing packet of length %x.\n\n", length);
ptr = packet;
- for (loop = 1; loop <= length; loop++)
- {
+ for (loop = 1; loop <= length; loop++) {
printf ("%2x ", *ptr++);
- if ((loop % 40)== 0)
+ if ((loop % 40) == 0)
printf ("\n");
}
}
-int eth_3com_recv(struct eth_device* dev)
+int eth_3com_recv (struct eth_device *dev)
{
u16 stat = 0;
u32 status;
int rx_prev, length = 0;
- while (!(ETH_STATUS(dev) & UpComplete)) /* wait on receipt of packet */
+ while (!(ETH_STATUS (dev) & UpComplete)) /* wait on receipt of packet */
;
- status = le32_to_cpu(rx_ring[rx_next].status); /* packet status */
+ status = le32_to_cpu (rx_ring[rx_next].status); /* packet status */
- while (status & (1<<15))
- {
+ while (status & (1 << 15)) {
/* A packet has been received */
- if (status & (1<<15))
- {
+ if (status & (1 << 15)) {
/* A valid frame received */
- length = le32_to_cpu(rx_ring[rx_next].status) & 0x1fff; /* length is in bits 0 - 12 */
+ length = le32_to_cpu (rx_ring[rx_next].status) & 0x1fff; /* length is in bits 0 - 12 */
/* Pass the packet up to the protocol layers */
- NetReceive((uchar *)le32_to_cpu(rx_ring[rx_next].addr), length);
- rx_ring[rx_next].status = 0; /* clear the status word */
- ETH_CMD(dev, AckIntr | UpComplete);
- issue_and_wait(dev, UpUnstall);
- }
- else
- if (stat & HostError)
- {
+ NetReceive ((uchar *)
+ le32_to_cpu (rx_ring[rx_next].addr),
+ length);
+ rx_ring[rx_next].status = 0; /* clear the status word */
+ ETH_CMD (dev, AckIntr | UpComplete);
+ issue_and_wait (dev, UpUnstall);
+ } else if (stat & HostError) {
/* There was an error */
- printf("Rx error status: 0x%4x\n", stat);
- init_rx_ring(dev);
+ printf ("Rx error status: 0x%4x\n", stat);
+ init_rx_ring (dev);
goto Done;
}
rx_prev = rx_next;
rx_next = (rx_next + 1) % NUM_RX_DESC;
- stat = ETH_STATUS(dev); /* register status */
- status = le32_to_cpu(rx_ring[rx_next].status); /* packet status */
+ stat = ETH_STATUS (dev); /* register status */
+ status = le32_to_cpu (rx_ring[rx_next].status); /* packet status */
}
-
Done:
return length;
}
-void eth_3com_halt(struct eth_device* dev)
+void eth_3com_halt (struct eth_device *dev)
{
- if (!(dev->iobase))
- {
+ if (!(dev->iobase)) {
goto Done;
}
- issue_and_wait(dev, DownStall); /* shut down transmit and receive */
- issue_and_wait(dev, UpStall);
- issue_and_wait(dev, RxDisable);
- issue_and_wait(dev, TxDisable);
+ issue_and_wait (dev, DownStall); /* shut down transmit and receive */
+ issue_and_wait (dev, UpStall);
+ issue_and_wait (dev, RxDisable);
+ issue_and_wait (dev, TxDisable);
/* free(tx_ring); /###* release memory allocated to the DPD and UPD rings */
/* free(rx_ring); */
@@ -764,41 +745,41 @@ Done:
return;
}
-static void init_rx_ring(struct eth_device* dev)
+static void init_rx_ring (struct eth_device *dev)
{
int i;
- PRINTF("Initializing rx_ring. rx_buffer = %p\n", rx_buffer);
- issue_and_wait(dev, UpStall);
+ PRINTF ("Initializing rx_ring. rx_buffer = %p\n", rx_buffer);
+ issue_and_wait (dev, UpStall);
- for (i = 0; i < NUM_RX_DESC; i++)
- {
- rx_ring[i].next = cpu_to_le32(((u32) &rx_ring[(i+1) % NUM_RX_DESC]));
- rx_ring[i].status = 0;
- rx_ring[i].addr = cpu_to_le32(((u32) &rx_buffer[i][0]));
- rx_ring[i].length = cpu_to_le32(PKTSIZE_ALIGN | LAST_FRAG);
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ rx_ring[i].next =
+ cpu_to_le32 (((u32) &
+ rx_ring[(i + 1) % NUM_RX_DESC]));
+ rx_ring[i].status = 0;
+ rx_ring[i].addr = cpu_to_le32 (((u32) & rx_buffer[i][0]));
+ rx_ring[i].length = cpu_to_le32 (PKTSIZE_ALIGN | LAST_FRAG);
}
rx_next = 0;
}
-static void purge_tx_ring(struct eth_device* dev)
+static void purge_tx_ring (struct eth_device *dev)
{
int i;
- PRINTF("Purging tx_ring.\n");
+ PRINTF ("Purging tx_ring.\n");
- tx_next = 0;
+ tx_next = 0;
- for (i = 0; i < NUM_TX_DESC; i++)
- {
- tx_ring[i].next = 0;
- tx_ring[i].status = 0;
- tx_ring[i].addr = 0;
- tx_ring[i].length = 0;
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ tx_ring[i].next = 0;
+ tx_ring[i].status = 0;
+ tx_ring[i].addr = 0;
+ tx_ring[i].length = 0;
}
}
-static void read_hw_addr(struct eth_device* dev, bd_t *bis)
+static void read_hw_addr (struct eth_device *dev, bd_t * bis)
{
u8 hw_addr[ETH_ALEN];
unsigned int eeprom[0x40];
@@ -807,77 +788,77 @@ static void read_hw_addr(struct eth_device* dev, bd_t *bis)
/* Read the station address from the EEPROM. */
- EL3WINDOW(dev, 0);
- for (i = 0; i < 0x40; i++)
- {
- ETH_OUTW(dev, EEPROM_Read + i, Wn0EepromCmd);
+ EL3WINDOW (dev, 0);
+ for (i = 0; i < 0x40; i++) {
+ ETH_OUTW (dev, EEPROM_Read + i, Wn0EepromCmd);
/* Pause for at least 162 us. for the read to take place. */
- for (timer = 10; timer >= 0; timer--)
- {
- udelay(162);
- if ((ETH_INW(dev, Wn0EepromCmd) & 0x8000) == 0)
+ for (timer = 10; timer >= 0; timer--) {
+ udelay (162);
+ if ((ETH_INW (dev, Wn0EepromCmd) & 0x8000) == 0)
break;
}
- eeprom[i] = ETH_INW(dev, Wn0EepromData);
+ eeprom[i] = ETH_INW (dev, Wn0EepromData);
}
/* Checksum calculation. I'm not sure about this part and there seems to be a bug on the 3com side of things */
for (i = 0; i < 0x21; i++)
- checksum ^= eeprom[i];
+ checksum ^= eeprom[i];
checksum = (checksum ^ (checksum >> 8)) & 0xff;
if (checksum != 0xbb)
- printf(" *** INVALID EEPROM CHECKSUM %4.4x *** \n", checksum);
+ printf (" *** INVALID EEPROM CHECKSUM %4.4x *** \n",
+ checksum);
- for (i = 0, j = 0; i < 3; i++)
- {
- hw_addr[j++] = (u8)((eeprom[i+10] >> 8) & 0xff);
- hw_addr[j++] = (u8)(eeprom[i+10] & 0xff);
+ for (i = 0, j = 0; i < 3; i++) {
+ hw_addr[j++] = (u8) ((eeprom[i + 10] >> 8) & 0xff);
+ hw_addr[j++] = (u8) (eeprom[i + 10] & 0xff);
}
/* MAC Address is in window 2, write value from EEPROM to window 2 */
- EL3WINDOW(dev, 2);
+ EL3WINDOW (dev, 2);
for (i = 0; i < 6; i++)
- ETH_OUTB(dev, hw_addr[i], i);
+ ETH_OUTB (dev, hw_addr[i], i);
- for (j = 0; j < ETH_ALEN; j+=2)
- {
- hw_addr[j] = (u8)(ETH_INW(dev, j) & 0xff);
- hw_addr[j+1] = (u8)((ETH_INW(dev, j) >> 8) & 0xff);
+ for (j = 0; j < ETH_ALEN; j += 2) {
+ hw_addr[j] = (u8) (ETH_INW (dev, j) & 0xff);
+ hw_addr[j + 1] = (u8) ((ETH_INW (dev, j) >> 8) & 0xff);
}
- for (i=0;i<ETH_ALEN;i++)
- {
- if (hw_addr[i] != bis->bi_enetaddr[i])
- {
-/* printf("Warning: HW address don't match:\n"); */
-/* printf("Address in 3Com Window 2 is " */
-/* "%02X:%02X:%02X:%02X:%02X:%02X\n", */
-/* hw_addr[0], hw_addr[1], hw_addr[2], */
-/* hw_addr[3], hw_addr[4], hw_addr[5]); */
-/* printf("Address used by U-Boot is " */
-/* "%02X:%02X:%02X:%02X:%02X:%02X\n", */
-/* bis->bi_enetaddr[0], bis->bi_enetaddr[1], */
-/* bis->bi_enetaddr[2], bis->bi_enetaddr[3], */
-/* bis->bi_enetaddr[4], bis->bi_enetaddr[5]); */
-/* goto Done; */
- char buffer[256];
- if (bis->bi_enetaddr[0] == 0 && bis->bi_enetaddr[1] == 0 &&
- bis->bi_enetaddr[2] == 0 && bis->bi_enetaddr[3] == 0 &&
- bis->bi_enetaddr[4] == 0 && bis->bi_enetaddr[5] == 0)
- {
-
- sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X",
- hw_addr[0], hw_addr[1], hw_addr[2],
- hw_addr[3], hw_addr[4], hw_addr[5]);
- setenv("ethaddr", buffer);
- }
+ for (i = 0; i < ETH_ALEN; i++) {
+ if (hw_addr[i] != bis->bi_enetaddr[i]) {
+/* printf("Warning: HW address don't match:\n"); */
+/* printf("Address in 3Com Window 2 is " */
+/* "%02X:%02X:%02X:%02X:%02X:%02X\n", */
+/* hw_addr[0], hw_addr[1], hw_addr[2], */
+/* hw_addr[3], hw_addr[4], hw_addr[5]); */
+/* printf("Address used by U-Boot is " */
+/* "%02X:%02X:%02X:%02X:%02X:%02X\n", */
+/* bis->bi_enetaddr[0], bis->bi_enetaddr[1], */
+/* bis->bi_enetaddr[2], bis->bi_enetaddr[3], */
+/* bis->bi_enetaddr[4], bis->bi_enetaddr[5]); */
+/* goto Done; */
+ char buffer[256];
+
+ if (bis->bi_enetaddr[0] == 0
+ && bis->bi_enetaddr[1] == 0
+ && bis->bi_enetaddr[2] == 0
+ && bis->bi_enetaddr[3] == 0
+ && bis->bi_enetaddr[4] == 0
+ && bis->bi_enetaddr[5] == 0) {
+
+ sprintf (buffer,
+ "%02X:%02X:%02X:%02X:%02X:%02X",
+ hw_addr[0], hw_addr[1], hw_addr[2],
+ hw_addr[3], hw_addr[4], hw_addr[5]);
+ setenv ("ethaddr", buffer);
+ }
}
}
- for(i=0; i<ETH_ALEN; i++) dev->enetaddr[i] = hw_addr[i];
+ for (i = 0; i < ETH_ALEN; i++)
+ dev->enetaddr[i] = hw_addr[i];
Done:
return;
diff --git a/board/MAI/AmigaOneG3SE/interrupts.c b/board/MAI/AmigaOneG3SE/interrupts.c
index 5b314a8..86b4415 100644
--- a/board/MAI/AmigaOneG3SE/interrupts.c
+++ b/board/MAI/AmigaOneG3SE/interrupts.c
@@ -176,9 +176,9 @@ external_interrupt(struct pt_regs *regs)
else {
PRINTF ("\nBogus External Interrupt IRQ %d\n", irq);
/*
- * turn off the bogus interrupt, otherwise it
- * might repeat forever
- */
+ * turn off the bogus interrupt, otherwise it
+ * might repeat forever
+ */
unmask = 0;
}
diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.c b/board/MAI/AmigaOneG3SE/ps2kbd.c
index cf4f4d0..39d8149 100644
--- a/board/MAI/AmigaOneG3SE/ps2kbd.c
+++ b/board/MAI/AmigaOneG3SE/ps2kbd.c
@@ -58,7 +58,7 @@ void i8259_unmask_irq(unsigned int irq);
#define KBD_STAT_KOBF 0x01
#define KBD_STAT_IBF 0x02
#define KBD_STAT_SYS 0x04
-#define KBD_STAT_CD 0x08
+#define KBD_STAT_CD 0x08
#define KBD_STAT_LOCK 0x10
#define KBD_STAT_MOBF 0x20
#define KBD_STAT_TI_OUT 0x40
@@ -71,50 +71,50 @@ void i8259_unmask_irq(unsigned int irq);
* Keyboard Controller Commands
*/
-#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
-#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
-#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */
+#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
+#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
+#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */
#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */
-#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */
-#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */
-#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */
-#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */
-#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */
-#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */
+#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */
+#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */
+#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */
+#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */
+#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */
+#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */
#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if
initiated by the auxiliary device */
-#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
+#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
/*
* Keyboard Commands
*/
-#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
-#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
-#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
-#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */
-#define KBD_CMD_RESET 0xFF /* Reset */
+#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
+#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
+#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
+#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */
+#define KBD_CMD_RESET 0xFF /* Reset */
/*
* Keyboard Replies
*/
-#define KBD_REPLY_POR 0xAA /* Power on reset */
-#define KBD_REPLY_ACK 0xFA /* Command ACK */
-#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */
+#define KBD_REPLY_POR 0xAA /* Power on reset */
+#define KBD_REPLY_ACK 0xFA /* Command ACK */
+#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */
/*
* Status Register Bits
*/
-#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
-#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
-#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
-#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
-#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
-#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
-#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
-#define KBD_STAT_PERR 0x80 /* Parity error */
+#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
+#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
+#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
+#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
+#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
+#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
+#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
+#define KBD_STAT_PERR 0x80 /* Parity error */
#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
@@ -122,24 +122,24 @@ void i8259_unmask_irq(unsigned int irq);
* Controller Mode Register Bits
*/
-#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
-#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
-#define KBD_MODE_SYS 0x04 /* The system flag (?) */
-#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
-#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
+#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
+#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
+#define KBD_MODE_SYS 0x04 /* The system flag (?) */
+#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
+#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */
-#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
-#define KBD_MODE_RFU 0x80
+#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
+#define KBD_MODE_RFU 0x80
-#define KDB_DATA_PORT 0x60
+#define KDB_DATA_PORT 0x60
#define KDB_COMMAND_PORT 0x64
-#define LED_SCR 0x01 /* scroll lock led */
-#define LED_CAP 0x04 /* caps lock led */
-#define LED_NUM 0x02 /* num lock led */
+#define LED_SCR 0x01 /* scroll lock led */
+#define LED_CAP 0x04 /* caps lock led */
+#define LED_NUM 0x02 /* num lock led */
-#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */
+#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */
static volatile char kbd_buffer[KBD_BUFFER_LEN];
@@ -194,21 +194,22 @@ static unsigned char kbd_ctrl_xlate[] = {
* Init
******************************************************************/
-int isa_kbd_init(void)
+int isa_kbd_init (void)
{
- char* result;
- result=kbd_initialize();
- if (result != NULL)
- {
- result = kbd_initialize();
+ char *result;
+
+ result = kbd_initialize ();
+ if (result != NULL) {
+ result = kbd_initialize ();
}
- if(result==NULL) {
- printf("AT Keyboard initialized\n");
- irq_install_handler(KBD_INTERRUPT, (interrupt_handler_t *)kbd_interrupt, NULL);
+ if (result == NULL) {
+ printf ("AT Keyboard initialized\n");
+ irq_install_handler (KBD_INTERRUPT,
+ (interrupt_handler_t *) kbd_interrupt,
+ NULL);
return (1);
- }
- else {
- printf("%s\n",result);
+ } else {
+ printf ("%s\n", result);
return (-1);
}
}
@@ -225,20 +226,20 @@ int overwrite_console (void)
int drv_isa_kbd_init (void)
{
int error;
- device_t kbddev ;
+ device_t kbddev ;
char *stdinname = getenv ("stdin");
if(isa_kbd_init()==-1)
return -1;
- memset (&kbddev, 0, sizeof(kbddev));
- strcpy(kbddev.name, DEVNAME);
- kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
- kbddev.putc = NULL ;
+ memset (&kbddev, 0, sizeof(kbddev));
+ strcpy(kbddev.name, DEVNAME);
+ kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+ kbddev.putc = NULL ;
kbddev.puts = NULL ;
kbddev.getc = kbd_getc ;
kbddev.tstc = kbd_testc ;
- error = device_register (&kbddev);
+ error = device_register (&kbddev);
if(error==0) {
/* check if this is the standard input device */
if(strcmp(stdinname,DEVNAME)==0) {
@@ -301,7 +302,6 @@ int kbd_getc(void)
}
-
/* set LEDs */
void kbd_set_leds(void)
@@ -322,140 +322,139 @@ void kbd_set_leds(void)
kbd_send_data(leds);
}
-
-void handle_keyboard_event(unsigned char scancode)
+void handle_keyboard_event (unsigned char scancode)
{
unsigned char keycode;
/* Convert scancode to keycode */
- PRINTF("scancode %x\n",scancode);
- if(scancode==0xe0) {
- e0=1; /* special charakters */
+ PRINTF ("scancode %x\n", scancode);
+ if (scancode == 0xe0) {
+ e0 = 1; /* special charakters */
return;
}
- if(e0==1) {
- e0=0; /* delete flag */
- if(!( ((scancode&0x7F)==0x38)|| /* the right ctrl key */
- ((scancode&0x7F)==0x1D)|| /* the right alt key */
- ((scancode&0x7F)==0x35)|| /* the right '/' key */
- ((scancode&0x7F)==0x1C)|| /* the right enter key */
- ((scancode)==0x48)|| /* arrow up */
- ((scancode)==0x50)|| /* arrow down */
- ((scancode)==0x4b)|| /* arrow left */
- ((scancode)==0x4d))) /* arrow right */
+ if (e0 == 1) {
+ e0 = 0; /* delete flag */
+ if (!(((scancode & 0x7F) == 0x38) || /* the right ctrl key */
+ ((scancode & 0x7F) == 0x1D) || /* the right alt key */
+ ((scancode & 0x7F) == 0x35) || /* the right '/' key */
+ ((scancode & 0x7F) == 0x1C) || /* the right enter key */
+ ((scancode) == 0x48) || /* arrow up */
+ ((scancode) == 0x50) || /* arrow down */
+ ((scancode) == 0x4b) || /* arrow left */
+ ((scancode) == 0x4d)))
+ /* arrow right */
/* we swallow unknown e0 codes */
return;
}
/* special cntrl keys */
- switch(scancode)
- {
+ switch (scancode) {
case 0x48:
- kbd_put_queue(27);
- kbd_put_queue(91);
- kbd_put_queue('A');
- return;
+ kbd_put_queue (27);
+ kbd_put_queue (91);
+ kbd_put_queue ('A');
+ return;
case 0x50:
- kbd_put_queue(27);
- kbd_put_queue(91);
- kbd_put_queue('B');
- return;
+ kbd_put_queue (27);
+ kbd_put_queue (91);
+ kbd_put_queue ('B');
+ return;
case 0x4b:
- kbd_put_queue(27);
- kbd_put_queue(91);
- kbd_put_queue('D');
- return;
+ kbd_put_queue (27);
+ kbd_put_queue (91);
+ kbd_put_queue ('D');
+ return;
case 0x4D:
- kbd_put_queue(27);
- kbd_put_queue(91);
- kbd_put_queue('C');
- return;
- case 0x58: /* F12 key */
- if (ctrl == 1)
- {
- extern int console_changed;
- setenv("stdin", DEVNAME);
- setenv("stdout", "vga");
- console_changed = 1;
- }
- return;
+ kbd_put_queue (27);
+ kbd_put_queue (91);
+ kbd_put_queue ('C');
+ return;
+ case 0x58: /* F12 key */
+ if (ctrl == 1) {
+ extern int console_changed;
+
+ setenv ("stdin", DEVNAME);
+ setenv ("stdout", "vga");
+ console_changed = 1;
+ }
+ return;
case 0x2A:
- case 0x36: /* shift pressed */
- shift=1;
- return; /* do nothing else */
- case 0xAA:
- case 0xB6: /* shift released */
- shift=0;
- return; /* do nothing else */
- case 0x38: /* alt pressed */
- alt=1;
- return; /* do nothing else */
- case 0xB8: /* alt released */
- alt=0;
- return; /* do nothing else */
- case 0x1d: /* ctrl pressed */
- ctrl=1;
- return; /* do nothing else */
- case 0x9d: /* ctrl released */
- ctrl=0;
- return; /* do nothing else */
- case 0x46: /* scrollock pressed */
- scroll_lock=~scroll_lock;
- kbd_set_leds();
- return; /* do nothing else */
- case 0x3A: /* capslock pressed */
- caps_lock=~caps_lock;
- kbd_set_leds();
- return;
- case 0x45: /* numlock pressed */
- num_lock=~num_lock;
- kbd_set_leds();
- return;
- case 0xC6: /* scroll lock released */
- case 0xC5: /* num lock released */
- case 0xBA: /* caps lock released */
- return; /* just swallow */
+ case 0x36: /* shift pressed */
+ shift = 1;
+ return; /* do nothing else */
+ case 0xAA:
+ case 0xB6: /* shift released */
+ shift = 0;
+ return; /* do nothing else */
+ case 0x38: /* alt pressed */
+ alt = 1;
+ return; /* do nothing else */
+ case 0xB8: /* alt released */
+ alt = 0;
+ return; /* do nothing else */
+ case 0x1d: /* ctrl pressed */
+ ctrl = 1;
+ return; /* do nothing else */
+ case 0x9d: /* ctrl released */
+ ctrl = 0;
+ return; /* do nothing else */
+ case 0x46: /* scrollock pressed */
+ scroll_lock = ~scroll_lock;
+ kbd_set_leds ();
+ return; /* do nothing else */
+ case 0x3A: /* capslock pressed */
+ caps_lock = ~caps_lock;
+ kbd_set_leds ();
+ return;
+ case 0x45: /* numlock pressed */
+ num_lock = ~num_lock;
+ kbd_set_leds ();
+ return;
+ case 0xC6: /* scroll lock released */
+ case 0xC5: /* num lock released */
+ case 0xBA: /* caps lock released */
+ return; /* just swallow */
}
- if((scancode&0x80)==0x80) /* key released */
+ if ((scancode & 0x80) == 0x80) /* key released */
return;
/* now, decide which table we need */
- if(scancode > (sizeof(kbd_plain_xlate)/sizeof(kbd_plain_xlate[0]))) { /* scancode not in list */
- PRINTF("unkown scancode %X\n",scancode);
- return; /* swallow it */
+ if (scancode > (sizeof (kbd_plain_xlate) / sizeof (kbd_plain_xlate[0]))) { /* scancode not in list */
+ PRINTF ("unkown scancode %X\n", scancode);
+ return; /* swallow it */
}
/* setup plain code first */
- keycode=kbd_plain_xlate[scancode];
- if(caps_lock==1) { /* caps_lock is pressed, overwrite plain code */
- if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */
- PRINTF("unkown caps-locked scancode %X\n",scancode);
- return; /* swallow it */
+ keycode = kbd_plain_xlate[scancode];
+ if (caps_lock == 1) { /* caps_lock is pressed, overwrite plain code */
+ if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) { /* scancode not in list */
+ PRINTF ("unkown caps-locked scancode %X\n", scancode);
+ return; /* swallow it */
}
- keycode=kbd_shift_xlate[scancode];
- if(keycode<'A') { /* we only want the alphas capital */
- keycode=kbd_plain_xlate[scancode];
+ keycode = kbd_shift_xlate[scancode];
+ if (keycode < 'A') { /* we only want the alphas capital */
+ keycode = kbd_plain_xlate[scancode];
}
}
- if(shift==1) { /* shift overwrites caps_lock */
- if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */
- PRINTF("unkown shifted scancode %X\n",scancode);
- return; /* swallow it */
+ if (shift == 1) { /* shift overwrites caps_lock */
+ if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) { /* scancode not in list */
+ PRINTF ("unkown shifted scancode %X\n", scancode);
+ return; /* swallow it */
}
- keycode=kbd_shift_xlate[scancode];
+ keycode = kbd_shift_xlate[scancode];
}
- if(ctrl==1) { /* ctrl overwrites caps_lock and shift */
- if(scancode > (sizeof(kbd_ctrl_xlate)/sizeof(kbd_ctrl_xlate[0]))) { /* scancode not in list */
- PRINTF("unkown ctrl scancode %X\n",scancode);
- return; /* swallow it */
+ if (ctrl == 1) { /* ctrl overwrites caps_lock and shift */
+ if (scancode > (sizeof (kbd_ctrl_xlate) / sizeof (kbd_ctrl_xlate[0]))) { /* scancode not in list */
+ PRINTF ("unkown ctrl scancode %X\n", scancode);
+ return; /* swallow it */
}
- keycode=kbd_ctrl_xlate[scancode];
+ keycode = kbd_ctrl_xlate[scancode];
}
/* check if valid keycode */
- if(keycode==0xff) {
- PRINTF("unkown scancode %X\n",scancode);
- return; /* swallow unknown codes */
+ if (keycode == 0xff) {
+ PRINTF ("unkown scancode %X\n", scancode);
+ return; /* swallow unknown codes */
}
- kbd_put_queue(keycode);
- PRINTF("%x\n",keycode);
+ kbd_put_queue (keycode);
+ PRINTF ("%x\n", keycode);
}
/*
@@ -463,34 +462,31 @@ void handle_keyboard_event(unsigned char scancode)
* appropriate action.
*
*/
-unsigned char handle_kbd_event(void)
+unsigned char handle_kbd_event (void)
{
- unsigned char status = kbd_read_status();
+ unsigned char status = kbd_read_status ();
unsigned int work = 10000;
while ((--work > 0) && (status & KBD_STAT_OBF)) {
unsigned char scancode;
- scancode = kbd_read_input();
+ scancode = kbd_read_input ();
/* Error bytes must be ignored to make the
Synaptics touchpads compaq use work */
/* Ignore error bytes */
- if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR)))
- {
- if (status & KBD_STAT_MOUSE_OBF)
- ; /* not supported: handle_mouse_event(scancode); */
+ if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) {
+ if (status & KBD_STAT_MOUSE_OBF); /* not supported: handle_mouse_event(scancode); */
else
- handle_keyboard_event(scancode);
+ handle_keyboard_event (scancode);
}
- status = kbd_read_status();
+ status = kbd_read_status ();
}
if (!work)
- PRINTF("pc_keyb: controller jammed (0x%02X).\n", status);
+ PRINTF ("pc_keyb: controller jammed (0x%02X).\n", status);
return status;
}
-
/******************************************************************************
* Lowlevel Part of keyboard section
*/
@@ -529,90 +525,91 @@ int kbd_read_data(void)
return val;
}
-int kbd_wait_for_input(void)
+int kbd_wait_for_input (void)
{
unsigned long timeout;
int val;
timeout = KBD_TIMEOUT;
- val=kbd_read_data();
- while(val < 0)
- {
- if(timeout--==0)
+ val = kbd_read_data ();
+ while (val < 0) {
+ if (timeout-- == 0)
return -1;
- udelay(1000);
- val=kbd_read_data();
+ udelay (1000);
+ val = kbd_read_data ();
}
return val;
}
-int kb_wait(void)
+int kb_wait (void)
{
unsigned long timeout = KBC_TIMEOUT * 10;
do {
- unsigned char status = handle_kbd_event();
+ unsigned char status = handle_kbd_event ();
+
if (!(status & KBD_STAT_IBF))
- return 0; /* ok */
- udelay(1000);
+ return 0; /* ok */
+ udelay (1000);
timeout--;
} while (timeout);
return 1;
}
-void kbd_write_command_w(int data)
+void kbd_write_command_w (int data)
{
- if(kb_wait())
- PRINTF("timeout in kbd_write_command_w\n");
- kbd_write_command(data);
+ if (kb_wait ())
+ PRINTF ("timeout in kbd_write_command_w\n");
+ kbd_write_command (data);
}
-void kbd_write_output_w(int data)
+void kbd_write_output_w (int data)
{
- if(kb_wait())
- PRINTF("timeout in kbd_write_output_w\n");
- kbd_write_output(data);
+ if (kb_wait ())
+ PRINTF ("timeout in kbd_write_output_w\n");
+ kbd_write_output (data);
}
-void kbd_send_data(unsigned char data)
+void kbd_send_data (unsigned char data)
{
unsigned char status;
- i8259_mask_irq(KBD_INTERRUPT); /* disable interrupt */
- kbd_write_output_w(data);
- status = kbd_wait_for_input();
+
+ i8259_mask_irq (KBD_INTERRUPT); /* disable interrupt */
+ kbd_write_output_w (data);
+ status = kbd_wait_for_input ();
if (status == KBD_REPLY_ACK)
- i8259_unmask_irq(KBD_INTERRUPT); /* enable interrupt */
+ i8259_unmask_irq (KBD_INTERRUPT); /* enable interrupt */
}
-char * kbd_initialize(void)
+char *kbd_initialize (void)
{
int status;
- in_pointer = 0; /* delete in Buffer */
+ in_pointer = 0; /* delete in Buffer */
out_pointer = 0;
/*
* Test the keyboard interface.
* This seems to be the only way to get it going.
* If the test is successful a x55 is placed in the input buffer.
*/
- kbd_write_command_w(KBD_CCMD_SELF_TEST);
- if (kbd_wait_for_input() != 0x55)
+ kbd_write_command_w (KBD_CCMD_SELF_TEST);
+ if (kbd_wait_for_input () != 0x55)
return "Kbd: failed self test";
/*
* Perform a keyboard interface test. This causes the controller
* to test the keyboard clock and data lines. The results of the
* test are placed in the input buffer.
*/
- kbd_write_command_w(KBD_CCMD_KBD_TEST);
- if (kbd_wait_for_input() != 0x00)
+ kbd_write_command_w (KBD_CCMD_KBD_TEST);
+ if (kbd_wait_for_input () != 0x00)
return "Kbd: interface failed self test";
/*
* Enable the keyboard by allowing the keyboard clock to run.
*/
- kbd_write_command_w(KBD_CCMD_KBD_ENABLE);
- status = kbd_wait_for_input();
+ kbd_write_command_w (KBD_CCMD_KBD_ENABLE);
+ status = kbd_wait_for_input ();
/*
* Reset keyboard. If the read times out
* then the assumption is that no keyboard is
@@ -622,17 +619,16 @@ char * kbd_initialize(void)
* Set up to try again if the keyboard asks for RESEND.
*/
do {
- kbd_write_output_w(KBD_CMD_RESET);
- status = kbd_wait_for_input();
+ kbd_write_output_w (KBD_CMD_RESET);
+ status = kbd_wait_for_input ();
if (status == KBD_REPLY_ACK)
break;
- if (status != KBD_REPLY_RESEND)
- {
- PRINTF("status: %X\n",status);
+ if (status != KBD_REPLY_RESEND) {
+ PRINTF ("status: %X\n", status);
return "Kbd: reset failed, no ACK";
}
} while (1);
- if (kbd_wait_for_input() != KBD_REPLY_POR)
+ if (kbd_wait_for_input () != KBD_REPLY_POR)
return "Kbd: reset failed, no POR";
/*
@@ -642,44 +638,43 @@ char * kbd_initialize(void)
* Set up to try again if the keyboard asks for RESEND.
*/
do {
- kbd_write_output_w(KBD_CMD_DISABLE);
- status = kbd_wait_for_input();
+ kbd_write_output_w (KBD_CMD_DISABLE);
+ status = kbd_wait_for_input ();
if (status == KBD_REPLY_ACK)
break;
if (status != KBD_REPLY_RESEND)
return "Kbd: disable keyboard: no ACK";
} while (1);
- kbd_write_command_w(KBD_CCMD_WRITE_MODE);
- kbd_write_output_w(KBD_MODE_KBD_INT
- | KBD_MODE_SYS
- | KBD_MODE_DISABLE_MOUSE
- | KBD_MODE_KCC);
+ kbd_write_command_w (KBD_CCMD_WRITE_MODE);
+ kbd_write_output_w (KBD_MODE_KBD_INT
+ | KBD_MODE_SYS
+ | KBD_MODE_DISABLE_MOUSE | KBD_MODE_KCC);
/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
- kbd_write_command_w(KBD_CCMD_READ_MODE);
- if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
+ kbd_write_command_w (KBD_CCMD_READ_MODE);
+ if (!(kbd_wait_for_input () & KBD_MODE_KCC)) {
/*
* If the controller does not support conversion,
* Set the keyboard to scan-code set 1.
*/
- kbd_write_output_w(0xF0);
- kbd_wait_for_input();
- kbd_write_output_w(0x01);
- kbd_wait_for_input();
+ kbd_write_output_w (0xF0);
+ kbd_wait_for_input ();
+ kbd_write_output_w (0x01);
+ kbd_wait_for_input ();
}
- kbd_write_output_w(KBD_CMD_ENABLE);
- if (kbd_wait_for_input() != KBD_REPLY_ACK)
+ kbd_write_output_w (KBD_CMD_ENABLE);
+ if (kbd_wait_for_input () != KBD_REPLY_ACK)
return "Kbd: enable keyboard: no ACK";
/*
* Finally, set the typematic rate to maximum.
*/
- kbd_write_output_w(KBD_CMD_SET_RATE);
- if (kbd_wait_for_input() != KBD_REPLY_ACK)
+ kbd_write_output_w (KBD_CMD_SET_RATE);
+ if (kbd_wait_for_input () != KBD_REPLY_ACK)
return "Kbd: Set rate: no ACK";
- kbd_write_output_w(0x00);
- if (kbd_wait_for_input() != KBD_REPLY_ACK)
+ kbd_write_output_w (0x00);
+ if (kbd_wait_for_input () != KBD_REPLY_ACK)
return "Kbd: Set rate: no ACK";
return NULL;
}
diff --git a/board/MAI/AmigaOneG3SE/start.txt b/board/MAI/AmigaOneG3SE/start.txt
index e421462..2526ed2 100644
--- a/board/MAI/AmigaOneG3SE/start.txt
+++ b/board/MAI/AmigaOneG3SE/start.txt
@@ -39,11 +39,11 @@
DIM0_TIM_CTL_0 = 0x737d737d (0xc9)
/* DRAM timing control for dimm0 & dimm1; set wait one clock */
- /* cycle for next data access */
+ /* cycle for next data access */
DIM2_TIM_CTL_0 = 0x737d737d (0xca)
/* DRAM timing control for dimm2 & dimm3; set wait one clock */
- /* cycle for next data access */
+ /* cycle for next data access */
DIM0_BNK0_CTL_0 = BNK0_RAM_SIZ_128MB (0x90)
/* set dimm0 bank0 for 128 MB */
diff --git a/board/MAI/AmigaOneG3SE/u-boot.lds b/board/MAI/AmigaOneG3SE/u-boot.lds
index 11b28d7..7386ea7 100644
--- a/board/MAI/AmigaOneG3SE/u-boot.lds
+++ b/board/MAI/AmigaOneG3SE/u-boot.lds
@@ -40,11 +40,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.c b/board/MAI/AmigaOneG3SE/usb_uhci.c
index 14e8043..479beed 100644
--- a/board/MAI/AmigaOneG3SE/usb_uhci.c
+++ b/board/MAI/AmigaOneG3SE/usb_uhci.c
@@ -522,7 +522,7 @@ void usb_check_int_chain(void)
link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
td=(uhci_td_t *)link; /* assign it */
/* all interrupt TDs are finally linked to the td_int[0].
- * so we process all until we find the td_int[0].
+ * so we process all until we find the td_int[0].
* if int0 chain points to a QH, we're also done
*/
while(((i>0) && (link != (unsigned long)&td_int[0])) ||
diff --git a/board/MAI/AmigaOneG3SE/via686.c b/board/MAI/AmigaOneG3SE/via686.c
index 3606db8..2427ce5 100644
--- a/board/MAI/AmigaOneG3SE/via686.c
+++ b/board/MAI/AmigaOneG3SE/via686.c
@@ -97,7 +97,7 @@ void via_isa_init(pci_dev_t dev, struct pci_config_table *table)
pci_write_config_byte(dev, 0x80, 0);
pci_write_config_byte(dev, 0x85, 0x01);
-/* pci_write_config_byte(dev, 0x77, 0x00); */
+/* pci_write_config_byte(dev, 0x77, 0x00); */
}
}
@@ -212,7 +212,7 @@ void via_cfgfunc_via686(struct pci_controller *host, pci_dev_t dev, struct pci_c
}
__asm (" .globl via_calibrate_time_base \n"
- "via_calibrate_time_base: \n"
+ "via_calibrate_time_base: \n"
" lis 9, 0xfe00 \n"
" li 0, 0x00 \n"
" mttbu 0 \n"
@@ -262,9 +262,9 @@ void ide_led(uchar led, uchar status)
/* unsigned char c = in_byte(0x92); */
/* if (!status) */
-/* out_byte(0x92, c | 0xC0); */
+/* out_byte(0x92, c | 0xC0); */
/* else */
-/* out_byte(0x92, c & ~0xC0); */
+/* out_byte(0x92, c & ~0xC0); */
}
diff --git a/board/MAI/menu/menu.h b/board/MAI/menu/menu.h
index 8aebb7d..23d89a7 100644
--- a/board/MAI/menu/menu.h
+++ b/board/MAI/menu/menu.h
@@ -4,15 +4,14 @@
/* A single menu */
typedef void (*menu_finish_callback)(struct menu_s *menu);
-typedef struct menu_s
-{
- char *name; /* Menu name */
- int num_options; /* Number of options in this menu */
- int flags; /* Various flags - see below */
- int option_align; /* Aligns options to a field width of this much characters if != 0 */
-
- struct menu_option_s **options; /* Pointer to this menu's options */
- menu_finish_callback callback; /* Called when the menu closes */
+typedef struct menu_s {
+ char *name; /* Menu name */
+ int num_options; /* Number of options in this menu */
+ int flags; /* Various flags - see below */
+ int option_align; /* Aligns options to a field width of this much characters if != 0 */
+
+ struct menu_option_s **options; /* Pointer to this menu's options */
+ menu_finish_callback callback; /* Called when the menu closes */
} menu_t;
/*
@@ -23,13 +22,12 @@ typedef struct menu_s
* sys : pointer for system-specific data, init to NULL and don't touch
*/
-#define OPTION_PREAMBLE \
- int type; \
- char *name; \
- char *help; \
- int id; \
- void *sys; \
-
+#define OPTION_PREAMBLE \
+ int type; \
+ char *name; \
+ char *help; \
+ int id; \
+ void *sys;
/*
* Menu option types.
@@ -110,59 +108,49 @@ typedef struct menu_text_s
#define MENU_SELECTION_TYPE 3
-typedef struct menu_select_option_s
-{
- char *map_from; /* Map this variable contents ... */
- char *map_to; /* ... to this menu text and vice versa */
+typedef struct menu_select_option_s {
+ char *map_from; /* Map this variable contents ... */
+ char *map_to; /* ... to this menu text and vice versa */
} menu_select_option_t;
-typedef struct menu_select_s
-{
- OPTION_PREAMBLE
-
- int num_options; /* Number of mappings */
- menu_select_option_t **options;
- /* Option list array */
+typedef struct menu_select_s {
+ OPTION_PREAMBLE int num_options; /* Number of mappings */
+ menu_select_option_t **options;
+ /* Option list array */
} menu_select_t;
#define MENU_ROUTINE_TYPE 4
-typedef void (*menu_routine_callback)(struct menu_routine_s *);
+typedef void (*menu_routine_callback) (struct menu_routine_s *);
-typedef struct menu_routine_s
-{
- OPTION_PREAMBLE
- menu_routine_callback callback;
- /* routine to be called */
- void *user_data; /* User data, don't care for system */
+typedef struct menu_routine_s {
+ OPTION_PREAMBLE menu_routine_callback callback;
+ /* routine to be called */
+ void *user_data; /* User data, don't care for system */
} menu_routine_t;
#define MENU_CUSTOM_TYPE 5
-typedef void (*menu_custom_draw)(struct menu_custom_s *);
-typedef void (*menu_custom_key)(struct menu_custom_s *, int);
+typedef void (*menu_custom_draw) (struct menu_custom_s *);
+typedef void (*menu_custom_key) (struct menu_custom_s *, int);
-typedef struct menu_custom_s
-{
- OPTION_PREAMBLE
- menu_custom_draw drawfunc;
- menu_custom_key keyfunc;
- void *user_data;
+typedef struct menu_custom_s {
+ OPTION_PREAMBLE menu_custom_draw drawfunc;
+ menu_custom_key keyfunc;
+ void *user_data;
} menu_custom_t;
/*
* The menu option superstructure
*/
-typedef struct menu_option_s
-{
- union
- {
- menu_submenu_t m_sub_menu;
- menu_boolean_t m_boolean;
- menu_text_t m_text;
- menu_select_t m_select;
- menu_routine_t m_routine;
- };
+typedef struct menu_option_s {
+ union {
+ menu_submenu_t m_sub_menu;
+ menu_boolean_t m_boolean;
+ menu_text_t m_text;
+ menu_select_t m_select;
+ menu_routine_t m_routine;
+ };
} menu_option_t;
/* Init the menu system. Returns <0 on error */
diff --git a/board/Marvell/common/bootseq.txt b/board/Marvell/common/bootseq.txt
index 391d49a..290aed9 100644
--- a/board/Marvell/common/bootseq.txt
+++ b/board/Marvell/common/bootseq.txt
@@ -56,7 +56,7 @@ in_flash:
setup stack pointer (r1)
setup GOT
call cpu_init_f
- debug leds
+ debug leds
board_init_f: (common/board.c)
board_early_init_f:
remap gt regs?
@@ -74,7 +74,7 @@ in_flash:
dram_size()
setup PCI slave memory mappings
setup SCS
- setup monitor
+ setup monitor
alloc board info struct
init bd struct
relocate_code: (cpu/mpc7xxx/start.S)
diff --git a/board/Marvell/common/flash.c b/board/Marvell/common/flash.c
index a8add85..3603372 100644
--- a/board/Marvell/common/flash.c
+++ b/board/Marvell/common/flash.c
@@ -23,7 +23,7 @@
/*
* flash.c - flash support for the 512k, 8bit boot flash
- and the 8MB 32bit extra flash on the DB64360
+ and the 8MB 32bit extra flash on the DB64360
* most of this file was based on the existing U-Boot
* flash drivers.
*
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
index d8acd31..923d955 100644
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -425,7 +425,7 @@ void mpsc_sdma_init (void)
(MV64360_SDMA_WIN_ACCESS_FULL <<
(MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-/* Setup MPSC internal address space base address */
+/* Setup MPSC internal address space base address */
GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
/* no high address remap*/
diff --git a/board/Marvell/db64360/mpsc.h b/board/Marvell/db64360/mpsc.h
index f95f8c0..4b537ea 100644
--- a/board/Marvell/db64360/mpsc.h
+++ b/board/Marvell/db64360/mpsc.h
@@ -67,9 +67,9 @@ extern int (*mpsc_test_char)(void);
#define TX_STOP 0x00010000
#define RX_ENABLE 0x00000080
-#define SDMA_RX_ABORT (1 << 15)
-#define SDMA_TX_ABORT (1 << 31)
-#define MPSC_TX_ABORT (1 << 7)
+#define SDMA_RX_ABORT (1 << 15)
+#define SDMA_TX_ABORT (1 << 31)
+#define MPSC_TX_ABORT (1 << 7)
#define MPSC_RX_ABORT (1 << 23)
#define MPSC_ENTER_HUNT (1 << 31)
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c
index e5a87ad..dfc0bf7 100644
--- a/board/Marvell/db64360/mv_eth.c
+++ b/board/Marvell/db64360/mv_eth.c
@@ -1391,7 +1391,7 @@ u32 mv_get_internal_sram_base (void)
* port_phy_addr).
*
* INPUT:
-* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
*
* OUTPUT:
* See description.
@@ -1551,7 +1551,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
* ether_init_rx_desc_ring for Rx queues).
*
* INPUT:
-* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
*
* OUTPUT:
* Ethernet port is ready to receive and transmit.
@@ -1641,7 +1641,7 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
* INPUT:
* ETH_PORT eth_port_num Port number.
* char * p_addr Address to be set
-* ETH_QUEUE queue Rx queue number for this MAC address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
*
* OUTPUT:
* Set MAC address low and high registers. also calls eth_port_uc_addr()
@@ -1679,10 +1679,10 @@ static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
* parameters.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
+* ETH_PORT eth_port_num Port number.
* unsigned char uc_nibble Unicast MAC Address last nibble.
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* This function add/removes MAC addresses from the port unicast address
@@ -1761,10 +1761,10 @@ static bool eth_port_uc_addr (ETH_PORT eth_port_num,
* In this case, the function calculates the CRC-8bit value and calls
* eth_port_omc_addr() routine to set the Other Multicast Table.
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char *p_addr Unicast MAC Address.
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char *p_addr Unicast MAC Address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -1895,10 +1895,10 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num,
* according to the argument given.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -1959,10 +1959,10 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num,
* CRC-8 argument given.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -2203,7 +2203,7 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num)
* eth_port_reset - Reset Ethernet port
*
* DESCRIPTION:
- * This routine resets the chip by aborting any SDMA engine activity and
+ * This routine resets the chip by aborting any SDMA engine activity and
* clearing the MIB counters. The Receiver and the Transmit unit are in
* idle state after this command is performed and the port is disabled.
*
@@ -2556,9 +2556,9 @@ static void eth_set_access_control (ETH_PORT eth_port_num,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
- * int rx_desc_num Number of Rx descriptors
- * int rx_buff_size Size of Rx buffer
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * int rx_desc_num Number of Rx descriptors
+ * int rx_buff_size Size of Rx buffer
* unsigned int rx_desc_base_addr Rx descriptors memory area base addr.
* unsigned int rx_buff_base_addr Rx buffer memory area base addr.
*
@@ -2650,9 +2650,9 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
- * int tx_desc_num Number of Tx descriptors
- * int tx_buff_size Size of Tx buffer
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * int tx_desc_num Number of Tx descriptors
+ * int tx_buff_size Size of Tx buffer
* unsigned int tx_desc_base_addr Tx descriptors memory area base addr.
* unsigned int tx_buff_base_addr Tx buffer memory area base addr.
*
@@ -2745,7 +2745,7 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
+ * ETH_QUEUE tx_queue Number of Tx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2861,7 +2861,7 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
+ * ETH_QUEUE tx_queue Number of Tx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2930,7 +2930,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
* eth_port_receive - Get received information from Rx ring.
*
* DESCRIPTION:
- * This routine returns the received data to the caller. There is no
+ * This routine returns the received data to the caller. There is no
* data copying during routine operation. All information is returned
* using pointer to packet information struct passed from the caller.
* If the routine exhausts Rx ring resources then the resource error flag
@@ -2938,7 +2938,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
+ * ETH_QUEUE rx_queue Number of Rx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2980,7 +2980,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
/* Nothing to receive... */
if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/* DP(printf("Rx: command_status: %08x\n", command_status)); */
+/* DP(printf("Rx: command_status: %08x\n", command_status)); */
D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
/* DP(printf("\nETH_END_OF_JOB ...\n"));*/
return ETH_END_OF_JOB;
@@ -3019,7 +3019,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
+ * ETH_QUEUE rx_queue Number of Rx queue.
* PKT_INFO *p_pkt_info Information on the returned buffer.
*
* OUTPUT:
diff --git a/board/Marvell/db64360/u-boot.lds b/board/Marvell/db64360/u-boot.lds
index 25e16de..1a95755 100644
--- a/board/Marvell/db64360/u-boot.lds
+++ b/board/Marvell/db64360/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
index b783aff..359b831 100644
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -425,7 +425,7 @@ void mpsc_sdma_init (void)
(MV64460_SDMA_WIN_ACCESS_FULL <<
(MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-/* Setup MPSC internal address space base address */
+/* Setup MPSC internal address space base address */
GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
/* no high address remap*/
diff --git a/board/Marvell/db64460/mpsc.h b/board/Marvell/db64460/mpsc.h
index 3cc0c0f..b8462cb 100644
--- a/board/Marvell/db64460/mpsc.h
+++ b/board/Marvell/db64460/mpsc.h
@@ -67,9 +67,9 @@ extern int (*mpsc_test_char)(void);
#define TX_STOP 0x00010000
#define RX_ENABLE 0x00000080
-#define SDMA_RX_ABORT (1 << 15)
-#define SDMA_TX_ABORT (1 << 31)
-#define MPSC_TX_ABORT (1 << 7)
+#define SDMA_RX_ABORT (1 << 15)
+#define SDMA_TX_ABORT (1 << 31)
+#define MPSC_TX_ABORT (1 << 7)
#define MPSC_RX_ABORT (1 << 23)
#define MPSC_ENTER_HUNT (1 << 31)
diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c
index b2c7835..0458164 100644
--- a/board/Marvell/db64460/mv_eth.c
+++ b/board/Marvell/db64460/mv_eth.c
@@ -1390,7 +1390,7 @@ u32 mv_get_internal_sram_base (void)
* port_phy_addr).
*
* INPUT:
-* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
*
* OUTPUT:
* See description.
@@ -1550,7 +1550,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
* ether_init_rx_desc_ring for Rx queues).
*
* INPUT:
-* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
*
* OUTPUT:
* Ethernet port is ready to receive and transmit.
@@ -1640,7 +1640,7 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
* INPUT:
* ETH_PORT eth_port_num Port number.
* char * p_addr Address to be set
-* ETH_QUEUE queue Rx queue number for this MAC address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
*
* OUTPUT:
* Set MAC address low and high registers. also calls eth_port_uc_addr()
@@ -1678,10 +1678,10 @@ static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
* parameters.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
+* ETH_PORT eth_port_num Port number.
* unsigned char uc_nibble Unicast MAC Address last nibble.
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* This function add/removes MAC addresses from the port unicast address
@@ -1760,10 +1760,10 @@ static bool eth_port_uc_addr (ETH_PORT eth_port_num,
* In this case, the function calculates the CRC-8bit value and calls
* eth_port_omc_addr() routine to set the Other Multicast Table.
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char *p_addr Unicast MAC Address.
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char *p_addr Unicast MAC Address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -1894,10 +1894,10 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num,
* according to the argument given.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -1958,10 +1958,10 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num,
* CRC-8 argument given.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -2202,7 +2202,7 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num)
* eth_port_reset - Reset Ethernet port
*
* DESCRIPTION:
- * This routine resets the chip by aborting any SDMA engine activity and
+ * This routine resets the chip by aborting any SDMA engine activity and
* clearing the MIB counters. The Receiver and the Transmit unit are in
* idle state after this command is performed and the port is disabled.
*
@@ -2555,9 +2555,9 @@ static void eth_set_access_control (ETH_PORT eth_port_num,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
- * int rx_desc_num Number of Rx descriptors
- * int rx_buff_size Size of Rx buffer
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * int rx_desc_num Number of Rx descriptors
+ * int rx_buff_size Size of Rx buffer
* unsigned int rx_desc_base_addr Rx descriptors memory area base addr.
* unsigned int rx_buff_base_addr Rx buffer memory area base addr.
*
@@ -2649,9 +2649,9 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
- * int tx_desc_num Number of Tx descriptors
- * int tx_buff_size Size of Tx buffer
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * int tx_desc_num Number of Tx descriptors
+ * int tx_buff_size Size of Tx buffer
* unsigned int tx_desc_base_addr Tx descriptors memory area base addr.
* unsigned int tx_buff_base_addr Tx buffer memory area base addr.
*
@@ -2744,7 +2744,7 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
+ * ETH_QUEUE tx_queue Number of Tx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2860,7 +2860,7 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
+ * ETH_QUEUE tx_queue Number of Tx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2929,7 +2929,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
* eth_port_receive - Get received information from Rx ring.
*
* DESCRIPTION:
- * This routine returns the received data to the caller. There is no
+ * This routine returns the received data to the caller. There is no
* data copying during routine operation. All information is returned
* using pointer to packet information struct passed from the caller.
* If the routine exhausts Rx ring resources then the resource error flag
@@ -2937,7 +2937,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
+ * ETH_QUEUE rx_queue Number of Rx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2979,7 +2979,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
/* Nothing to receive... */
if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/* DP(printf("Rx: command_status: %08x\n", command_status)); */
+/* DP(printf("Rx: command_status: %08x\n", command_status)); */
D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
/* DP(printf("\nETH_END_OF_JOB ...\n"));*/
return ETH_END_OF_JOB;
@@ -3018,7 +3018,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
+ * ETH_QUEUE rx_queue Number of Rx queue.
* PKT_INFO *p_pkt_info Information on the returned buffer.
*
* OUTPUT:
diff --git a/board/Marvell/db64460/u-boot.lds b/board/Marvell/db64460/u-boot.lds
index 25e16de..1a95755 100644
--- a/board/Marvell/db64460/u-boot.lds
+++ b/board/Marvell/db64460/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/MigoR/lowlevel_init.S b/board/MigoR/lowlevel_init.S
index 2ec8e04..e48f7b3 100644
--- a/board/MigoR/lowlevel_init.S
+++ b/board/MigoR/lowlevel_init.S
@@ -87,7 +87,7 @@ lowlevel_init:
mov.w r0, @r1
mov.l DLLFRQ_A, r1 ! 20080115
- mov.l DLLFRQ_D, r0 ! 20080115
+ mov.l DLLFRQ_D, r0 ! 20080115
mov.l r0, @r1
mov.l FRQCR_A, r1 ! 0xA4150000 Frequency control register
@@ -100,11 +100,11 @@ lowlevel_init:
bsc_init:
mov.l CMNCR_A, r1 ! CMNCR address -> R1
- mov.l CMNCR_D, r0 ! CMNCR data -> R0
+ mov.l CMNCR_D, r0 ! CMNCR data -> R0
mov.l r0, @r1 ! CMNCR set
mov.l CS0BCR_A, r1 ! CS0BCR address -> R1
- mov.l CS0BCR_D, r0 ! CS0BCR data -> R0
+ mov.l CS0BCR_D, r0 ! CS0BCR data -> R0
mov.l r0, @r1 ! CS0BCR set
mov.l CS4BCR_A, r1 ! CS4BCR address -> R1
@@ -112,35 +112,35 @@ bsc_init:
mov.l r0, @r1 ! CS4BCR set
mov.l CS5ABCR_A, r1 ! CS5ABCR address -> R1
- mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0
+ mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0
mov.l r0, @r1 ! CS5ABCR set
mov.l CS5BBCR_A, r1 ! CS5BBCR address -> R1
- mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0
+ mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0
mov.l r0, @r1 ! CS5BBCR set
mov.l CS6ABCR_A, r1 ! CS6ABCR address -> R1
- mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0
+ mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0
mov.l r0, @r1 ! CS6ABCR set
mov.l CS0WCR_A, r1 ! CS0WCR address -> R1
- mov.l CS0WCR_D, r0 ! CS0WCR data -> R0
+ mov.l CS0WCR_D, r0 ! CS0WCR data -> R0
mov.l r0, @r1 ! CS0WCR set
mov.l CS4WCR_A, r1 ! CS4WCR address -> R1
- mov.l CS4WCR_D, r0 ! CS4WCR data -> R0
+ mov.l CS4WCR_D, r0 ! CS4WCR data -> R0
mov.l r0, @r1 ! CS4WCR set
mov.l CS5AWCR_A, r1 ! CS5AWCR address -> R1
- mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0
+ mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0
mov.l r0, @r1 ! CS5AWCR set
mov.l CS5BWCR_A, r1 ! CS5BWCR address -> R1
- mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0
+ mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0
mov.l r0, @r1 ! CS5BWCR set
mov.l CS6AWCR_A, r1 ! CS6AWCR address -> R1
- mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0
+ mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0
mov.l r0, @r1 ! CS6AWCR set
! SDRAM initialization
@@ -173,7 +173,7 @@ bsc_init:
mov.l r0, @r1
mov.l SDMR3_A, r1 ! SDMR3 address -> R1
- mov #0x00, r0 ! SDMR3 data -> R0
+ mov #0x00, r0 ! SDMR3 data -> R0
mov.b r0, @r1 ! SDMR3 set
! BL bit off (init = ON) (?!?)
diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds
index dbea90c..1f9a191 100644
--- a/board/RPXClassic/u-boot.lds
+++ b/board/RPXClassic/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug
index 753411f..c33581d 100644
--- a/board/RPXClassic/u-boot.lds.debug
+++ b/board/RPXClassic/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/RPXlite/flash.c b/board/RPXlite/flash.c
index 846794d..659d60a 100644
--- a/board/RPXlite/flash.c
+++ b/board/RPXlite/flash.c
@@ -31,7 +31,7 @@
* are not tested.
*
* (?) Does an RPXLite board which
- * does not use AM29LV800 flash memory exist ?
+ * does not use AM29LV800 flash memory exist ?
* I don't know...
*/
diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds
index dbea90c..1f9a191 100644
--- a/board/RPXlite/u-boot.lds
+++ b/board/RPXlite/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug
index 753411f..c33581d 100644
--- a/board/RPXlite/u-boot.lds.debug
+++ b/board/RPXlite/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/RPXlite_dw/RPXlite_dw.c b/board/RPXlite_dw/RPXlite_dw.c
index 237c58a..d3dc081 100644
--- a/board/RPXlite_dw/RPXlite_dw.c
+++ b/board/RPXlite_dw/RPXlite_dw.c
@@ -124,7 +124,7 @@ long int initdram (int board_type)
memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
/*Disable Periodic timer A. */
- udelay(200);
+ udelay(200);
/* perform SDRAM initializsation sequence */
diff --git a/board/RPXlite_dw/flash.c b/board/RPXlite_dw/flash.c
index 1cbd537..41cb036 100644
--- a/board/RPXlite_dw/flash.c
+++ b/board/RPXlite_dw/flash.c
@@ -31,7 +31,7 @@
* are not tested.
*
* (?) Does an RPXLite board which
- * does not use AM29LV800 flash memory exist ?
+ * does not use AM29LV800 flash memory exist ?
* I don't know...
*/
@@ -178,8 +178,8 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
value = addr[0] ;
switch (value & 0x00FF00FF) {
- case AMD_MANUFACT: /* AMD_MANUFACT=0x00010001 in flash.h. */
- info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h.*/
+ case AMD_MANUFACT: /* AMD_MANUFACT =0x00010001 in flash.h */
+ info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h */
break;
case FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds
index 4d0d8a7..2ee1206 100644
--- a/board/RPXlite_dw/u-boot.lds
+++ b/board/RPXlite_dw/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug
index 4942c42..f6d1537 100644
--- a/board/RPXlite_dw/u-boot.lds.debug
+++ b/board/RPXlite_dw/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds
index 854912e..9e767ee 100644
--- a/board/RRvision/u-boot.lds
+++ b/board/RRvision/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/a3000/Makefile b/board/a3000/Makefile
index d3db1a9..dcb1907 100644
--- a/board/a3000/Makefile
+++ b/board/a3000/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c
index ab707ae..737d35d 100644
--- a/board/a3000/a3000.c
+++ b/board/a3000/a3000.c
@@ -82,7 +82,7 @@ static struct pci_config_table pci_a3000_config_table[] = {
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x15, PCI_ANY_ID, /* PCI slot2 */
+ PCI_ANY_ID, 0x15, PCI_ANY_ID, /* PCI slot2 */
pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
PCI_ENET2_MEMADDR,
PCI_COMMAND_IO |
diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds
index f0d7567..25aaa7d 100644
--- a/board/adder/u-boot.lds
+++ b/board/adder/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ads5121/u-boot.lds b/board/ads5121/u-boot.lds
index 1418952..f2f6e14 100644
--- a/board/ads5121/u-boot.lds
+++ b/board/ads5121/u-boot.lds
@@ -30,11 +30,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds
index e5de203..cbdc0b0 100644
--- a/board/amcc/acadia/u-boot-nand.lds
+++ b/board/amcc/acadia/u-boot-nand.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds
index f1b7ec7..d52b51a 100644
--- a/board/amcc/acadia/u-boot.lds
+++ b/board/amcc/acadia/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index c4eace5..5077187 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -280,86 +280,86 @@ const unsigned char cfg_simulate_spd_eeprom[128] = {
#define EBC0_BNAP_SMALL_FLASH \
EBC0_BNAP_BME_DISABLED | \
EBC0_BNAP_TWT_ENCODE(6) | \
- EBC0_BNAP_CSN_ENCODE(0) | \
- EBC0_BNAP_OEN_ENCODE(1) | \
- EBC0_BNAP_WBN_ENCODE(1) | \
- EBC0_BNAP_WBF_ENCODE(3) | \
- EBC0_BNAP_TH_ENCODE(1) | \
- EBC0_BNAP_RE_ENABLED | \
- EBC0_BNAP_SOR_DELAYED | \
- EBC0_BNAP_BEM_WRITEONLY | \
+ EBC0_BNAP_CSN_ENCODE(0) | \
+ EBC0_BNAP_OEN_ENCODE(1) | \
+ EBC0_BNAP_WBN_ENCODE(1) | \
+ EBC0_BNAP_WBF_ENCODE(3) | \
+ EBC0_BNAP_TH_ENCODE(1) | \
+ EBC0_BNAP_RE_ENABLED | \
+ EBC0_BNAP_SOR_DELAYED | \
+ EBC0_BNAP_BEM_WRITEONLY | \
EBC0_BNAP_PEN_DISABLED
#define EBC0_BNCR_SMALL_FLASH_CS0 \
- EBC0_BNCR_BAS_ENCODE(0xFFF00000) | \
- EBC0_BNCR_BS_1MB | \
- EBC0_BNCR_BU_RW | \
+ EBC0_BNCR_BAS_ENCODE(0xFFF00000) | \
+ EBC0_BNCR_BS_1MB | \
+ EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_8BIT
#define EBC0_BNCR_SMALL_FLASH_CS4 \
- EBC0_BNCR_BAS_ENCODE(0x87F00000) | \
- EBC0_BNCR_BS_1MB | \
- EBC0_BNCR_BU_RW | \
+ EBC0_BNCR_BAS_ENCODE(0x87F00000) | \
+ EBC0_BNCR_BS_1MB | \
+ EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_8BIT
/* Large Flash or SRAM */
#define EBC0_BNAP_LARGE_FLASH_OR_SRAM \
- EBC0_BNAP_BME_DISABLED | \
- EBC0_BNAP_TWT_ENCODE(8) | \
- EBC0_BNAP_CSN_ENCODE(0) | \
- EBC0_BNAP_OEN_ENCODE(1) | \
- EBC0_BNAP_WBN_ENCODE(1) | \
- EBC0_BNAP_WBF_ENCODE(1) | \
- EBC0_BNAP_TH_ENCODE(2) | \
- EBC0_BNAP_SOR_DELAYED | \
- EBC0_BNAP_BEM_RW | \
+ EBC0_BNAP_BME_DISABLED | \
+ EBC0_BNAP_TWT_ENCODE(8) | \
+ EBC0_BNAP_CSN_ENCODE(0) | \
+ EBC0_BNAP_OEN_ENCODE(1) | \
+ EBC0_BNAP_WBN_ENCODE(1) | \
+ EBC0_BNAP_WBF_ENCODE(1) | \
+ EBC0_BNAP_TH_ENCODE(2) | \
+ EBC0_BNAP_SOR_DELAYED | \
+ EBC0_BNAP_BEM_RW | \
EBC0_BNAP_PEN_DISABLED
-#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0 \
- EBC0_BNCR_BAS_ENCODE(0xFF800000) | \
- EBC0_BNCR_BS_8MB | \
- EBC0_BNCR_BU_RW | \
+#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0 \
+ EBC0_BNCR_BAS_ENCODE(0xFF800000) | \
+ EBC0_BNCR_BS_8MB | \
+ EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_16BIT
-#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4 \
- EBC0_BNCR_BAS_ENCODE(0x87800000) | \
- EBC0_BNCR_BS_8MB | \
- EBC0_BNCR_BU_RW | \
+#define EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS4 \
+ EBC0_BNCR_BAS_ENCODE(0x87800000) | \
+ EBC0_BNCR_BS_8MB | \
+ EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_16BIT
/* NVRAM - FPGA */
#define EBC0_BNAP_NVRAM_FPGA \
- EBC0_BNAP_BME_DISABLED | \
- EBC0_BNAP_TWT_ENCODE(9) | \
- EBC0_BNAP_CSN_ENCODE(0) | \
- EBC0_BNAP_OEN_ENCODE(1) | \
- EBC0_BNAP_WBN_ENCODE(1) | \
- EBC0_BNAP_WBF_ENCODE(0) | \
- EBC0_BNAP_TH_ENCODE(2) | \
- EBC0_BNAP_RE_ENABLED | \
- EBC0_BNAP_SOR_DELAYED | \
- EBC0_BNAP_BEM_WRITEONLY | \
+ EBC0_BNAP_BME_DISABLED | \
+ EBC0_BNAP_TWT_ENCODE(9) | \
+ EBC0_BNAP_CSN_ENCODE(0) | \
+ EBC0_BNAP_OEN_ENCODE(1) | \
+ EBC0_BNAP_WBN_ENCODE(1) | \
+ EBC0_BNAP_WBF_ENCODE(0) | \
+ EBC0_BNAP_TH_ENCODE(2) | \
+ EBC0_BNAP_RE_ENABLED | \
+ EBC0_BNAP_SOR_DELAYED | \
+ EBC0_BNAP_BEM_WRITEONLY | \
EBC0_BNAP_PEN_DISABLED
#define EBC0_BNCR_NVRAM_FPGA_CS5 \
- EBC0_BNCR_BAS_ENCODE(0x80000000) | \
- EBC0_BNCR_BS_1MB | \
- EBC0_BNCR_BU_RW | \
+ EBC0_BNCR_BAS_ENCODE(0x80000000) | \
+ EBC0_BNCR_BS_1MB | \
+ EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_8BIT
/* Nand Flash */
#define EBC0_BNAP_NAND_FLASH \
- EBC0_BNAP_BME_DISABLED | \
- EBC0_BNAP_TWT_ENCODE(3) | \
- EBC0_BNAP_CSN_ENCODE(0) | \
- EBC0_BNAP_OEN_ENCODE(0) | \
- EBC0_BNAP_WBN_ENCODE(0) | \
- EBC0_BNAP_WBF_ENCODE(0) | \
- EBC0_BNAP_TH_ENCODE(1) | \
- EBC0_BNAP_RE_ENABLED | \
- EBC0_BNAP_SOR_NOT_DELAYED | \
- EBC0_BNAP_BEM_RW | \
+ EBC0_BNAP_BME_DISABLED | \
+ EBC0_BNAP_TWT_ENCODE(3) | \
+ EBC0_BNAP_CSN_ENCODE(0) | \
+ EBC0_BNAP_OEN_ENCODE(0) | \
+ EBC0_BNAP_WBN_ENCODE(0) | \
+ EBC0_BNAP_WBF_ENCODE(0) | \
+ EBC0_BNAP_TH_ENCODE(1) | \
+ EBC0_BNAP_RE_ENABLED | \
+ EBC0_BNAP_SOR_NOT_DELAYED | \
+ EBC0_BNAP_BEM_RW | \
EBC0_BNAP_PEN_DISABLED
@@ -367,22 +367,22 @@ const unsigned char cfg_simulate_spd_eeprom[128] = {
/* NAND0 */
#define EBC0_BNCR_NAND_FLASH_CS1 \
- EBC0_BNCR_BAS_ENCODE(0x90000000) | \
- EBC0_BNCR_BS_1MB | \
- EBC0_BNCR_BU_RW | \
+ EBC0_BNCR_BAS_ENCODE(0x90000000) | \
+ EBC0_BNCR_BS_1MB | \
+ EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_32BIT
/* NAND1 - Bank2 */
#define EBC0_BNCR_NAND_FLASH_CS2 \
- EBC0_BNCR_BAS_ENCODE(0x94000000) | \
- EBC0_BNCR_BS_1MB | \
- EBC0_BNCR_BU_RW | \
+ EBC0_BNCR_BAS_ENCODE(0x94000000) | \
+ EBC0_BNCR_BS_1MB | \
+ EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_32BIT
/* NAND1 - Bank3 */
#define EBC0_BNCR_NAND_FLASH_CS3 \
- EBC0_BNCR_BAS_ENCODE(0x94000000) | \
- EBC0_BNCR_BS_1MB | \
- EBC0_BNCR_BU_RW | \
+ EBC0_BNCR_BAS_ENCODE(0x94000000) | \
+ EBC0_BNCR_BS_1MB | \
+ EBC0_BNCR_BU_RW | \
EBC0_BNCR_BW_32BIT
int board_early_init_f(void)
diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds
index e5de203..cbdc0b0 100644
--- a/board/amcc/bamboo/u-boot-nand.lds
+++ b/board/amcc/bamboo/u-boot-nand.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/bamboo/u-boot.lds b/board/amcc/bamboo/u-boot.lds
index 53617b2..25d917a 100644
--- a/board/amcc/bamboo/u-boot.lds
+++ b/board/amcc/bamboo/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/bubinga/u-boot.lds b/board/amcc/bubinga/u-boot.lds
index f1b7ec7..d52b51a 100644
--- a/board/amcc/bubinga/u-boot.lds
+++ b/board/amcc/bubinga/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds
index 332e3aa..8a4b7f5 100644
--- a/board/amcc/canyonlands/u-boot-nand.lds
+++ b/board/amcc/canyonlands/u-boot-nand.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/canyonlands/u-boot.lds b/board/amcc/canyonlands/u-boot.lds
index f4c13f4..1783bc7 100644
--- a/board/amcc/canyonlands/u-boot.lds
+++ b/board/amcc/canyonlands/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds
index 557cae7..6be4bd1 100644
--- a/board/amcc/ebony/u-boot.lds
+++ b/board/amcc/ebony/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index e41caaf..193083f 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -441,27 +441,27 @@ void pcie_setup_hoses(int busno)
pci_register_hose(hose);
if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
+ ppc4xx_setup_pcie_endpoint(hose, i);
/*
* Reson for no scanning is endpoint can not generate
* upstream configuration accesses.
- */
+ */
} else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
+ ppc4xx_setup_pcie_rootpoint(hose, i);
env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
+ if (env != NULL) {
+ delay = simple_strtoul(env, NULL, 10);
if (delay > 5)
- printf("Warning, expect noticable delay before "
+ printf("Warning, expect noticable delay before "
"PCIe scan due to 'pciscandelay' value!\n");
mdelay(delay * 1000);
}
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+ bus = hose->last_busno + 1;
}
}
}
diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile
index b8da25f..39328c2 100644
--- a/board/amcc/kilauea/Makefile
+++ b/board/amcc/kilauea/Makefile
@@ -28,7 +28,7 @@ LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o cmd_pll.o memory.o
SOBJS = init.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
diff --git a/board/amcc/kilauea/init.S b/board/amcc/kilauea/init.S
index 053fe19..8cd534c 100644
--- a/board/amcc/kilauea/init.S
+++ b/board/amcc/kilauea/init.S
@@ -29,10 +29,10 @@
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
-#define mtsdram_as(reg, value) \
- addi r4,0,reg ; \
+#define mtsdram_as(reg, value) \
+ addi r4,0,reg ; \
mtdcr memcfga,r4 ; \
- addis r4,0,value@h ; \
+ addis r4,0,value@h ; \
ori r4,r4,value@l ; \
mtdcr memcfgd,r4 ;
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
index d806a41..f30dc8f 100644
--- a/board/amcc/kilauea/kilauea.c
+++ b/board/amcc/kilauea/kilauea.c
@@ -338,27 +338,27 @@ void pcie_setup_hoses(int busno)
pci_register_hose(hose);
if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
+ ppc4xx_setup_pcie_endpoint(hose, i);
/*
* Reson for no scanning is endpoint can not generate
* upstream configuration accesses.
- */
+ */
} else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
+ ppc4xx_setup_pcie_rootpoint(hose, i);
env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
+ if (env != NULL) {
+ delay = simple_strtoul(env, NULL, 10);
if (delay > 5)
- printf("Warning, expect noticable delay before "
+ printf("Warning, expect noticable delay before "
"PCIe scan due to 'pciscandelay' value!\n");
mdelay(delay * 1000);
}
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+ bus = hose->last_busno + 1;
}
}
}
diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds
index e5de203..cbdc0b0 100644
--- a/board/amcc/kilauea/u-boot-nand.lds
+++ b/board/amcc/kilauea/u-boot-nand.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/kilauea/u-boot.lds b/board/amcc/kilauea/u-boot.lds
index b6ca3bc..fe51ca1 100644
--- a/board/amcc/kilauea/u-boot.lds
+++ b/board/amcc/kilauea/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/luan/u-boot.lds b/board/amcc/luan/u-boot.lds
index 0a476cf..7911785 100644
--- a/board/amcc/luan/u-boot.lds
+++ b/board/amcc/luan/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/makalu/Makefile b/board/amcc/makalu/Makefile
index b8da25f..39328c2 100644
--- a/board/amcc/makalu/Makefile
+++ b/board/amcc/makalu/Makefile
@@ -28,7 +28,7 @@ LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o cmd_pll.o memory.o
SOBJS = init.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
diff --git a/board/amcc/makalu/init.S b/board/amcc/makalu/init.S
index 5e9a5e0..11c5b19 100644
--- a/board/amcc/makalu/init.S
+++ b/board/amcc/makalu/init.S
@@ -29,10 +29,10 @@
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
-#define mtsdram_as(reg, value) \
- addi r4,0,reg ; \
+#define mtsdram_as(reg, value) \
+ addi r4,0,reg ; \
mtdcr memcfga,r4 ; \
- addis r4,0,value@h ; \
+ addis r4,0,value@h ; \
ori r4,r4,value@l ; \
mtdcr memcfgd,r4 ;
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
index 25dd715..9baec9a 100644
--- a/board/amcc/makalu/makalu.c
+++ b/board/amcc/makalu/makalu.c
@@ -294,27 +294,27 @@ void pcie_setup_hoses(int busno)
pci_register_hose(hose);
if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
+ ppc4xx_setup_pcie_endpoint(hose, i);
/*
* Reson for no scanning is endpoint can not generate
* upstream configuration accesses.
- */
+ */
} else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
+ ppc4xx_setup_pcie_rootpoint(hose, i);
env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
+ if (env != NULL) {
+ delay = simple_strtoul(env, NULL, 10);
if (delay > 5)
- printf("Warning, expect noticable delay before "
+ printf("Warning, expect noticable delay before "
"PCIe scan due to 'pciscandelay' value!\n");
mdelay(delay * 1000);
}
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+ bus = hose->last_busno + 1;
}
}
}
diff --git a/board/amcc/makalu/u-boot.lds b/board/amcc/makalu/u-boot.lds
index b6ca3bc..fe51ca1 100644
--- a/board/amcc/makalu/u-boot.lds
+++ b/board/amcc/makalu/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds
index 76d1aef..298aba8 100644
--- a/board/amcc/ocotea/u-boot.lds
+++ b/board/amcc/ocotea/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds
index 94dd754..ae2e18d 100644
--- a/board/amcc/sequoia/u-boot-nand.lds
+++ b/board/amcc/sequoia/u-boot-nand.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds
index da2a400..b20fb1c 100644
--- a/board/amcc/sequoia/u-boot.lds
+++ b/board/amcc/sequoia/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds
index f1b7ec7..d52b51a 100644
--- a/board/amcc/taihu/u-boot.lds
+++ b/board/amcc/taihu/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/taishan/u-boot.lds b/board/amcc/taishan/u-boot.lds
index a0e9e96..85d3759 100644
--- a/board/amcc/taishan/u-boot.lds
+++ b/board/amcc/taishan/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/walnut/u-boot.lds b/board/amcc/walnut/u-boot.lds
index c36346a..5d07e44 100644
--- a/board/amcc/walnut/u-boot.lds
+++ b/board/amcc/walnut/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/yosemite/u-boot.lds b/board/amcc/yosemite/u-boot.lds
index 92cf177..c12aad7 100644
--- a/board/amcc/yosemite/u-boot.lds
+++ b/board/amcc/yosemite/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index 52486cc..11d1743 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -737,27 +737,27 @@ void yucca_setup_pcie_fpga_rootpoint(int port)
case 0:
rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
endpoint = 0;
- power = FPGA_REG1A_PE0_PWRON;
+ power = FPGA_REG1A_PE0_PWRON;
green_led = FPGA_REG1A_PE0_GLED;
- clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
+ clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
yellow_led = FPGA_REG1A_PE0_YLED;
reset_off = FPGA_REG1C_PE0_PERST;
break;
case 1:
rootpoint = 0;
endpoint = FPGA_REG1C_PE1_ENDPOINT;
- power = FPGA_REG1A_PE1_PWRON;
+ power = FPGA_REG1A_PE1_PWRON;
green_led = FPGA_REG1A_PE1_GLED;
- clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
+ clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
yellow_led = FPGA_REG1A_PE1_YLED;
reset_off = FPGA_REG1C_PE1_PERST;
break;
case 2:
rootpoint = 0;
endpoint = FPGA_REG1C_PE2_ENDPOINT;
- power = FPGA_REG1A_PE2_PWRON;
+ power = FPGA_REG1A_PE2_PWRON;
green_led = FPGA_REG1A_PE2_GLED;
- clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
+ clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
yellow_led = FPGA_REG1A_PE2_YLED;
reset_off = FPGA_REG1C_PE2_PERST;
break;
@@ -794,27 +794,27 @@ void yucca_setup_pcie_fpga_endpoint(int port)
case 0:
rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
endpoint = 0;
- power = FPGA_REG1A_PE0_PWRON;
+ power = FPGA_REG1A_PE0_PWRON;
green_led = FPGA_REG1A_PE0_GLED;
- clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
+ clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
yellow_led = FPGA_REG1A_PE0_YLED;
reset_off = FPGA_REG1C_PE0_PERST;
break;
case 1:
rootpoint = 0;
endpoint = FPGA_REG1C_PE1_ENDPOINT;
- power = FPGA_REG1A_PE1_PWRON;
+ power = FPGA_REG1A_PE1_PWRON;
green_led = FPGA_REG1A_PE1_GLED;
- clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
+ clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
yellow_led = FPGA_REG1A_PE1_YLED;
reset_off = FPGA_REG1C_PE1_PERST;
break;
case 2:
rootpoint = 0;
endpoint = FPGA_REG1C_PE2_ENDPOINT;
- power = FPGA_REG1A_PE2_PWRON;
+ power = FPGA_REG1A_PE2_PWRON;
green_led = FPGA_REG1A_PE2_GLED;
- clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
+ clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
yellow_led = FPGA_REG1A_PE2_YLED;
reset_off = FPGA_REG1C_PE2_PERST;
break;
@@ -884,21 +884,21 @@ void pcie_setup_hoses(int busno)
/*
* Reson for no scanning is endpoint can not generate
* upstream configuration accesses.
- */
+ */
} else {
ppc4xx_setup_pcie_rootpoint(hose, i);
env = getenv("pciscandelay");
if (env != NULL) {
delay = simple_strtoul(env, NULL, 10);
if (delay > 5)
- printf("Warning, expect noticable delay before "
+ printf("Warning, expect noticable delay before "
"PCIe scan due to 'pciscandelay' value!\n");
mdelay(delay * 1000);
}
/*
* Config access can only go down stream
- */
+ */
hose->last_busno = pci_hose_scan(hose);
bus = hose->last_busno + 1;
}
diff --git a/board/amirix/ap1000/u-boot.lds b/board/amirix/ap1000/u-boot.lds
index 766e2bb..a939e03 100644
--- a/board/amirix/ap1000/u-boot.lds
+++ b/board/amirix/ap1000/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
index 383b064..7e39817 100644
--- a/board/apollon/apollon.c
+++ b/board/apollon/apollon.c
@@ -140,7 +140,7 @@ void wait_for_command_complete(unsigned int wd_base)
/*******************************************************************
* Routine:ether_init
* Description: take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
+ * for the EEPROM load to complete.
******************************************************************/
void ether_init(void)
{
diff --git a/board/armadillo/lowlevel_init.S b/board/armadillo/lowlevel_init.S
index 6cf6426..e7d373d 100644
--- a/board/armadillo/lowlevel_init.S
+++ b/board/armadillo/lowlevel_init.S
@@ -29,8 +29,8 @@
/* some parameters for the board */
/* setting up the memory */
-#define SRAM_START 0x60000000
-#define SRAM_SIZE 0x0000c000
+#define SRAM_START 0x60000000
+#define SRAM_SIZE 0x0000c000
.globl lowlevel_init
lowlevel_init:
diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c
index 4f84a58..6f02db2 100644
--- a/board/assabet/assabet.c
+++ b/board/assabet/assabet.c
@@ -46,7 +46,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define ECSR_PWRDWN 0x04
#define ECSR_INT 0x02
#define SMC_IO_SHIFT 2
-#define NCR_0 (*((volatile u_char *)(0x100000a0)))
+#define NCR_0 (*((volatile u_char *)(0x100000a0)))
#define NCR_ENET_OSC_EN (1<<3)
static inline u8
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 21479ac..b30aad8 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -126,7 +126,7 @@ static void at91sam9260ek_macb_hw_init(void)
/*
* Disable pull-up on:
* RXDV (PA17) => PHY normal mode (not Test mode)
- * ERX0 (PA14) => PHY ADDR0
+ * ERX0 (PA14) => PHY ADDR0
* ERX1 (PA15) => PHY ADDR1
* ERX2 (PA25) => PHY ADDR2
* ERX3 (PA26) => PHY ADDR3
diff --git a/board/atum8548/u-boot.lds b/board/atum8548/u-boot.lds
index dd5375b..46c45d7 100644
--- a/board/atum8548/u-boot.lds
+++ b/board/atum8548/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/barco/speed.h b/board/barco/speed.h
index 46860e8..e883dfb 100644
--- a/board/barco/speed.h
+++ b/board/barco/speed.h
@@ -52,10 +52,10 @@
* SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
*
* SPEED_FCOUNT2 timer 2 counting frequency
- * GCLK CPU clock
+ * GCLK CPU clock
* SPEED_TMR2_PS prescaler
*/
-#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
/*-----------------------------------------------------------------------
* Timer value for PIT
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index 1455953..f7f0013 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -69,7 +69,7 @@ struct therm {
#define SM501_POWER_MODE0_GATE 0x00000040UL
#define SM501_POWER_MODE1_GATE 0x00000048UL
#define POWER_MODE_GATE_GPIO_PWM_I2C 0x00000040UL
-#define SM501_GPIO_DATA_LOW 0x00010000UL
+#define SM501_GPIO_DATA_LOW 0x00010000UL
#define SM501_GPIO_DATA_HIGH 0x00010004UL
#define SM501_GPIO_DATA_DIR_LOW 0x00010008UL
#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL
diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h
index bd9e859..4e043e0 100644
--- a/board/bf533-ezkit/flash-defines.h
+++ b/board/bf533-ezkit/flash-defines.h
@@ -44,11 +44,11 @@
#define ERASE_SECT 6
#define READ 7
#define GET_SECTNUM 8
-#define FLASH_START_L 0x0000
-#define FLASH_START_H 0x2000
+#define FLASH_START_L 0x0000
+#define FLASH_START_H 0x2000
#define FLASH_TOT_SECT 40
-#define FLASH_SIZE 0x220000
-#define FLASH_MAN_ST 2
+#define FLASH_SIZE 0x220000
+#define FLASH_MAN_ST 2
#define CFG_FLASH0_BASE 0x20000000
#define RESET_VAL 0xF0
diff --git a/board/bf533-stamp/bf533-stamp.h b/board/bf533-stamp/bf533-stamp.h
index 1e58e47..3b0d620 100644
--- a/board/bf533-stamp/bf533-stamp.h
+++ b/board/bf533-stamp/bf533-stamp.h
@@ -38,13 +38,13 @@ extern unsigned long pll_div_fact;
extern void serial_setbrg(void);
/* Definitions used in Compact Flash Boot support */
-#define FIO_EDGE_CF_BITS 0x0000
-#define FIO_POLAR_CF_BITS 0x0000
-#define FIO_EDGE_BITS 0x1E0
-#define FIO_POLAR_BITS 0x160
+#define FIO_EDGE_CF_BITS 0x0000
+#define FIO_POLAR_CF_BITS 0x0000
+#define FIO_EDGE_BITS 0x1E0
+#define FIO_POLAR_BITS 0x160
/* Compact flash status bits in status register */
-#define CF_STAT_BITS 0x00000060
+#define CF_STAT_BITS 0x00000060
/* CF Flags used to switch between expansion and external
* memory banks
diff --git a/board/bmw/README b/board/bmw/README
index 70bc813..1f04b1b 100644
--- a/board/bmw/README
+++ b/board/bmw/README
@@ -89,7 +89,7 @@ Interrupt Mappings
BMW uses MPC8245 discrete mode interrupts. With the following
hardwired mappings:
-BCM5701 10/100/1000 Ethernet IRQ1
+BCM5701 10/100/1000 Ethernet IRQ1
CompactPCI Interrupt A IRQ2
RTC/Watchdog Interrupt IRQ3
Internal NS16552 UART IRQ4
diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S
index e6400c3..57a06a9 100644
--- a/board/bmw/early_init.S
+++ b/board/bmw/early_init.S
@@ -246,7 +246,7 @@ early_init_f:
#if 1 /* Turn off floating point (remove to keep FP on) */
andi. r3, r3, 0
sync
- mtmsr r3
+ mtmsr r3
isync
#endif
@@ -1137,7 +1137,7 @@ early_init_f:
/* delay */
lis r7, 1
mtctr r7
-label1: bdnz label1
+label1: bdnz label1
/* Set memgo bit */
/* MCCR1 */
@@ -1151,7 +1151,7 @@ label1: bdnz label1
/* delay again */
lis r7, 1
mtctr r7
-label2: bdnz label2
+label2: bdnz label2
#if 0
/* DEBUG: Infinite loop, write then read */
loop:
diff --git a/board/c2mon/pcmcia.c b/board/c2mon/pcmcia.c
index c389c67..57846b1 100644
--- a/board/c2mon/pcmcia.c
+++ b/board/c2mon/pcmcia.c
@@ -235,14 +235,14 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
sreg |= TPS2211_VPPD0 | TPS2211_VPPD1; /* VAVPP always Hi-Z */
switch(vcc) {
- case 0: break; /* Switch off */
+ case 0: break; /* Switch off */
case 33: sreg |= TPS2211_VCCD0; /* Switch on 3.3V */
sreg &= ~TPS2211_VCCD1;
break;
case 50: sreg &= ~TPS2211_VCCD0; /* Switch on 5.0V */
sreg |= TPS2211_VCCD1;
break;
- default: goto done;
+ default: goto done;
}
/* Checking supported voltages */
diff --git a/board/c2mon/u-boot.lds b/board/c2mon/u-boot.lds
index ee598c2..10b38ec 100644
--- a/board/c2mon/u-boot.lds
+++ b/board/c2mon/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/c2mon/u-boot.lds.debug b/board/c2mon/u-boot.lds.debug
index 1a25a98..85072fe 100644
--- a/board/c2mon/u-boot.lds.debug
+++ b/board/c2mon/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/cerf250/lowlevel_init.S b/board/cerf250/lowlevel_init.S
index c9b68d7..ad3c59f 100644
--- a/board/cerf250/lowlevel_init.S
+++ b/board/cerf250/lowlevel_init.S
@@ -40,7 +40,7 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
/*
- * Memory setup
+ * Memory setup
*/
.globl lowlevel_init
@@ -48,69 +48,69 @@ lowlevel_init:
/* Set up GPIO pins first ----------------------------------------- */
- ldr r0, =GPSR0
- ldr r1, =CFG_GPSR0_VAL
- str r1, [r0]
+ ldr r0, =GPSR0
+ ldr r1, =CFG_GPSR0_VAL
+ str r1, [r0]
- ldr r0, =GPSR1
- ldr r1, =CFG_GPSR1_VAL
- str r1, [r0]
+ ldr r0, =GPSR1
+ ldr r1, =CFG_GPSR1_VAL
+ str r1, [r0]
- ldr r0, =GPSR2
- ldr r1, =CFG_GPSR2_VAL
- str r1, [r0]
+ ldr r0, =GPSR2
+ ldr r1, =CFG_GPSR2_VAL
+ str r1, [r0]
- ldr r0, =GPCR0
- ldr r1, =CFG_GPCR0_VAL
- str r1, [r0]
+ ldr r0, =GPCR0
+ ldr r1, =CFG_GPCR0_VAL
+ str r1, [r0]
- ldr r0, =GPCR1
- ldr r1, =CFG_GPCR1_VAL
- str r1, [r0]
+ ldr r0, =GPCR1
+ ldr r1, =CFG_GPCR1_VAL
+ str r1, [r0]
- ldr r0, =GPCR2
- ldr r1, =CFG_GPCR2_VAL
- str r1, [r0]
+ ldr r0, =GPCR2
+ ldr r1, =CFG_GPCR2_VAL
+ str r1, [r0]
- ldr r0, =GPDR0
- ldr r1, =CFG_GPDR0_VAL
- str r1, [r0]
+ ldr r0, =GPDR0
+ ldr r1, =CFG_GPDR0_VAL
+ str r1, [r0]
- ldr r0, =GPDR1
- ldr r1, =CFG_GPDR1_VAL
- str r1, [r0]
+ ldr r0, =GPDR1
+ ldr r1, =CFG_GPDR1_VAL
+ str r1, [r0]
- ldr r0, =GPDR2
- ldr r1, =CFG_GPDR2_VAL
- str r1, [r0]
+ ldr r0, =GPDR2
+ ldr r1, =CFG_GPDR2_VAL
+ str r1, [r0]
- ldr r0, =GAFR0_L
- ldr r1, =CFG_GAFR0_L_VAL
- str r1, [r0]
+ ldr r0, =GAFR0_L
+ ldr r1, =CFG_GAFR0_L_VAL
+ str r1, [r0]
- ldr r0, =GAFR0_U
- ldr r1, =CFG_GAFR0_U_VAL
- str r1, [r0]
+ ldr r0, =GAFR0_U
+ ldr r1, =CFG_GAFR0_U_VAL
+ str r1, [r0]
- ldr r0, =GAFR1_L
- ldr r1, =CFG_GAFR1_L_VAL
- str r1, [r0]
+ ldr r0, =GAFR1_L
+ ldr r1, =CFG_GAFR1_L_VAL
+ str r1, [r0]
- ldr r0, =GAFR1_U
- ldr r1, =CFG_GAFR1_U_VAL
- str r1, [r0]
+ ldr r0, =GAFR1_U
+ ldr r1, =CFG_GAFR1_U_VAL
+ str r1, [r0]
- ldr r0, =GAFR2_L
- ldr r1, =CFG_GAFR2_L_VAL
- str r1, [r0]
+ ldr r0, =GAFR2_L
+ ldr r1, =CFG_GAFR2_L_VAL
+ str r1, [r0]
- ldr r0, =GAFR2_U
- ldr r1, =CFG_GAFR2_U_VAL
- str r1, [r0]
+ ldr r0, =GAFR2_U
+ ldr r1, =CFG_GAFR2_U_VAL
+ str r1, [r0]
- ldr r0, =PSSR /* enable GPIO pins */
- ldr r1, =CFG_PSSR_VAL
- str r1, [r0]
+ ldr r0, =PSSR /* enable GPIO pins */
+ ldr r1, =CFG_PSSR_VAL
+ str r1, [r0]
/* ---------------------------------------------------------------- */
/* Enable memory interface */
@@ -126,19 +126,19 @@ lowlevel_init:
/* FIXME: can be optimized later */
/* ---------------------------------------------------------------- */
- ldr r3, =OSCR /* reset the OS Timer Count to zero */
- mov r2, #0
- str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
- /* so 0x300 should be plenty */
+ ldr r3, =OSCR /* reset the OS Timer Count to zero */
+ mov r2, #0
+ str r2, [r3]
+ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
+ /* so 0x300 should be plenty */
1:
- ldr r2, [r3]
- cmp r4, r2
- bgt 1b
+ ldr r2, [r3]
+ cmp r4, r2
+ bgt 1b
mem_init:
- ldr r1, =MEMC_BASE /* get memory controller base addr. */
+ ldr r1, =MEMC_BASE /* get memory controller base addr. */
/* ---------------------------------------------------------------- */
/* Step 2a: Initialize Asynchronous static memory controller */
@@ -147,58 +147,58 @@ mem_init:
/* MSC registers: timing, bus width, mem type */
/* MSC0: nCS(0,1) */
- ldr r2, =CFG_MSC0_VAL
- str r2, [r1, #MSC0_OFFSET]
- ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
+ ldr r2, =CFG_MSC0_VAL
+ str r2, [r1, #MSC0_OFFSET]
+ ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
/* that data latches */
/* MSC1: nCS(2,3) */
- ldr r2, =CFG_MSC1_VAL
- str r2, [r1, #MSC1_OFFSET]
- ldr r2, [r1, #MSC1_OFFSET]
+ ldr r2, =CFG_MSC1_VAL
+ str r2, [r1, #MSC1_OFFSET]
+ ldr r2, [r1, #MSC1_OFFSET]
/* MSC2: nCS(4,5) */
- ldr r2, =CFG_MSC2_VAL
- str r2, [r1, #MSC2_OFFSET]
- ldr r2, [r1, #MSC2_OFFSET]
+ ldr r2, =CFG_MSC2_VAL
+ str r2, [r1, #MSC2_OFFSET]
+ ldr r2, [r1, #MSC2_OFFSET]
/* ---------------------------------------------------------------- */
/* Step 2b: Initialize Card Interface */
/* ---------------------------------------------------------------- */
/* MECR: Memory Expansion Card Register */
- ldr r2, =CFG_MECR_VAL
- str r2, [r1, #MECR_OFFSET]
- ldr r2, [r1, #MECR_OFFSET]
+ ldr r2, =CFG_MECR_VAL
+ str r2, [r1, #MECR_OFFSET]
+ ldr r2, [r1, #MECR_OFFSET]
/* MCMEM0: Card Interface slot 0 timing */
- ldr r2, =CFG_MCMEM0_VAL
- str r2, [r1, #MCMEM0_OFFSET]
- ldr r2, [r1, #MCMEM0_OFFSET]
+ ldr r2, =CFG_MCMEM0_VAL
+ str r2, [r1, #MCMEM0_OFFSET]
+ ldr r2, [r1, #MCMEM0_OFFSET]
/* MCMEM1: Card Interface slot 1 timing */
- ldr r2, =CFG_MCMEM1_VAL
- str r2, [r1, #MCMEM1_OFFSET]
- ldr r2, [r1, #MCMEM1_OFFSET]
+ ldr r2, =CFG_MCMEM1_VAL
+ str r2, [r1, #MCMEM1_OFFSET]
+ ldr r2, [r1, #MCMEM1_OFFSET]
/* MCATT0: Card Interface Attribute Space Timing, slot 0 */
- ldr r2, =CFG_MCATT0_VAL
- str r2, [r1, #MCATT0_OFFSET]
- ldr r2, [r1, #MCATT0_OFFSET]
+ ldr r2, =CFG_MCATT0_VAL
+ str r2, [r1, #MCATT0_OFFSET]
+ ldr r2, [r1, #MCATT0_OFFSET]
/* MCATT1: Card Interface Attribute Space Timing, slot 1 */
- ldr r2, =CFG_MCATT1_VAL
- str r2, [r1, #MCATT1_OFFSET]
- ldr r2, [r1, #MCATT1_OFFSET]
+ ldr r2, =CFG_MCATT1_VAL
+ str r2, [r1, #MCATT1_OFFSET]
+ ldr r2, [r1, #MCATT1_OFFSET]
/* MCIO0: Card Interface I/O Space Timing, slot 0 */
- ldr r2, =CFG_MCIO0_VAL
- str r2, [r1, #MCIO0_OFFSET]
- ldr r2, [r1, #MCIO0_OFFSET]
+ ldr r2, =CFG_MCIO0_VAL
+ str r2, [r1, #MCIO0_OFFSET]
+ ldr r2, [r1, #MCIO0_OFFSET]
/* MCIO1: Card Interface I/O Space Timing, slot 1 */
- ldr r2, =CFG_MCIO1_VAL
- str r2, [r1, #MCIO1_OFFSET]
- ldr r2, [r1, #MCIO1_OFFSET]
+ ldr r2, =CFG_MCIO1_VAL
+ str r2, [r1, #MCIO1_OFFSET]
+ ldr r2, [r1, #MCIO1_OFFSET]
/* ---------------------------------------------------------------- */
/* Step 2c: Write FLYCNFG FIXME: what's that??? */
@@ -212,16 +212,16 @@ mem_init:
/* Before accessing MDREFR we need a valid DRI field, so we set */
/* this to power on defaults + DRI field, set SDRAM clocks free running */
- ldr r3, =CFG_MDREFR_VAL
- ldr r2, =0xFFF
- and r3, r3, r2
+ ldr r3, =CFG_MDREFR_VAL
+ ldr r2, =0xFFF
+ and r3, r3, r2
- ldr r0, [r1, #MDREFR_OFFSET]
- bic r0, r0, r2
- bic r0, r0, #(MDREFR_K0FREE|MDREFR_K1FREE|MDREFR_K2FREE)
- orr r0, r0, r3
+ ldr r0, [r1, #MDREFR_OFFSET]
+ bic r0, r0, r2
+ bic r0, r0, #(MDREFR_K0FREE|MDREFR_K1FREE|MDREFR_K2FREE)
+ orr r0, r0, r3
- str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */
/* ---------------------------------------------------------------- */
@@ -244,18 +244,18 @@ mem_init:
/* set MDREFR according to user define with exception of a few bits */
ldr r4, =CFG_MDREFR_VAL
- ldr r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\
+ ldr r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\
MDREFR_K2RUN |MDREFR_K2DB2)
- and r4, r4, r2
- bic r0, r0, r2
- orr r0, r0, r4
+ and r4, r4, r2
+ bic r0, r0, r2
+ orr r0, r0, r4
str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */
ldr r0, [r1, #MDREFR_OFFSET]
/* Step 4b: de-assert MDREFR:SLFRSH. */
- bic r0, r0, #(MDREFR_SLFRSH)
+ bic r0, r0, #(MDREFR_SLFRSH)
str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */
ldr r0, [r1, #MDREFR_OFFSET]
@@ -263,10 +263,10 @@ mem_init:
/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE */
ldr r4, =CFG_MDREFR_VAL
- ldr r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \
- MDREFR_K1FREE | MDREFR_K2FREE)
- and r4, r4, r2
- orr r0, r0, r4
+ ldr r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \
+ MDREFR_K1FREE | MDREFR_K2FREE)
+ and r4, r4, r2
+ orr r0, r0, r4
str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */
ldr r0, [r1, #MDREFR_OFFSET]
@@ -274,9 +274,9 @@ mem_init:
/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */
/* configure but not enable each SDRAM partition pair. */
- ldr r4, =CFG_MDCNFG_VAL
- bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
- bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
+ ldr r4, =CFG_MDCNFG_VAL
+ bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
+ bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */
ldr r4, [r1, #MDCNFG_OFFSET]
@@ -284,15 +284,15 @@ mem_init:
/* Step 4e: Wait for the clock to the SDRAMs to stabilize, */
/* 100..200 µsec. */
- ldr r3, =OSCR /* reset the OS Timer Count to zero */
- mov r2, #0
- str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
+ ldr r3, =OSCR /* reset the OS Timer Count to zero */
+ mov r2, #0
+ str r2, [r3]
+ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
/* so 0x300 should be plenty */
1:
- ldr r2, [r3]
- cmp r4, r2
- bgt 1b
+ ldr r2, [r3]
+ cmp r4, r2
+ bgt 1b
/* Step 4f: Trigger a number (usually 8) refresh cycles by */
@@ -301,16 +301,16 @@ mem_init:
/* documented in SDRAM data sheets. The address(es) used */
/* for this purpose must not be cacheable. */
- ldr r3, =CFG_DRAM_BASE
+ ldr r3, =CFG_DRAM_BASE
.rept 8
- str r2, [r3]
+ str r2, [r3]
.endr
/* Step 4g: Write MDCNFG with enable bits asserted */
/* (MDCNFG:DEx set to 1). */
ldr r3, [r1, #MDCNFG_OFFSET]
- orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1)
+ orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1)
str r3, [r1, #MDCNFG_OFFSET]
/* Step 4h: Write MDMRS. */
@@ -378,27 +378,27 @@ initclks:
/* ---------------------------------------------------------------- */
/* Save SDRAM size */
- ldr r1, =DRAM_SIZE
- str r8, [r1]
+ ldr r1, =DRAM_SIZE
+ str r8, [r1]
/* Interrupt init: Mask all interrupts */
- ldr r0, =ICMR /* enable no sources */
- mov r1, #0
- str r1, [r0]
+ ldr r0, =ICMR /* enable no sources */
+ mov r1, #0
+ str r1, [r0]
/* FIXME */
#define NODEBUG
#ifdef NODEBUG
/*Disable software and data breakpoints */
- mov r0,#0
- mcr p15,0,r0,c14,c8,0 /* ibcr0 */
- mcr p15,0,r0,c14,c9,0 /* ibcr1 */
- mcr p15,0,r0,c14,c4,0 /* dbcon */
+ mov r0,#0
+ mcr p15,0,r0,c14,c8,0 /* ibcr0 */
+ mcr p15,0,r0,c14,c9,0 /* ibcr1 */
+ mcr p15,0,r0,c14,c4,0 /* dbcon */
/*Enable all debug functionality */
- mov r0,#0x80000000
- mcr p14,0,r0,c10,c0,0 /* dcsr */
+ mov r0,#0x80000000
+ mcr p14,0,r0,c10,c0,0 /* dcsr */
#endif
@@ -408,4 +408,4 @@ initclks:
endlowlevel_init:
- mov pc, lr
+ mov pc, lr
diff --git a/board/cm5200/u-boot.lds b/board/cm5200/u-boot.lds
index 5d2efad..87f37de 100644
--- a/board/cm5200/u-boot.lds
+++ b/board/cm5200/u-boot.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c
index 374cd07..3ad756d 100644
--- a/board/cmc_pu2/cmc_pu2.c
+++ b/board/cmc_pu2/cmc_pu2.c
@@ -73,7 +73,7 @@ int board_init (void)
pioc->PIO_PPUDR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
AT91C_PIO_PC2 | AT91C_PIO_PC3;
pioc->PIO_PER = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
+ AT91C_PIO_PC2 | AT91C_PIO_PC3;
/*
* On CMC-PU2 board configure PB3-PB6 to input without pull ups to
diff --git a/board/cmi/flash.c b/board/cmi/flash.c
index f7c25f4..f57d8ec 100644
--- a/board/cmi/flash.c
+++ b/board/cmi/flash.c
@@ -25,7 +25,7 @@
* File: flash.c
*
* Discription: This Driver is for 28F320J3A, 28F640J3A and
- * 28F128J3A Intel flashs working in 16 Bit mode.
+ * 28F128J3A Intel flashs working in 16 Bit mode.
* They are single bank flashs.
*
* Most of this code is taken from existing u-boot
@@ -67,9 +67,9 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
/*
* Local function prototypes
*/
-static ulong flash_get_size (vu_short *addr, flash_info_t *info);
-static int write_short (flash_info_t *info, ulong dest, ushort data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
+static ulong flash_get_size (vu_short *addr, flash_info_t *info);
+static int write_short (flash_info_t *info, ulong dest, ushort data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
/*
* Initialize flash
diff --git a/board/cobra5272/u-boot.lds b/board/cobra5272/u-boot.lds
index 8f719ea..f99a236 100644
--- a/board/cobra5272/u-boot.lds
+++ b/board/cobra5272/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/cogent/lcd.h b/board/cogent/lcd.h
index 1056eea..9e6157e 100644
--- a/board/cogent/lcd.h
+++ b/board/cogent/lcd.h
@@ -70,7 +70,7 @@
/* LCD status values */
#define LCD_OK 0x00
-#define LCD_ERR 0x01
+#define LCD_ERR 0x01
#define LCD_LINE0 0x00
#define LCD_LINE1 0x40
diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds
index 8d9c08e..59d62e1 100644
--- a/board/cogent/u-boot.lds
+++ b/board/cogent/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug
index 753411f..c33581d 100644
--- a/board/cogent/u-boot.lds.debug
+++ b/board/cogent/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/cpc45/plx9030.c b/board/cpc45/plx9030.c
index 99ec39a..3711ccb 100644
--- a/board/cpc45/plx9030.c
+++ b/board/cpc45/plx9030.c
@@ -54,7 +54,7 @@ registers (CS3) on CPC45.
/* PLX9030 register offsets */
#define P9030_LAS0RR 0x00
-#define P9030_LAS1RR 0x04
+#define P9030_LAS1RR 0x04
#define P9030_LAS2RR 0x08
#define P9030_LAS3RR 0x0c
#define P9030_EROMRR 0x10
@@ -72,8 +72,8 @@ registers (CS3) on CPC45.
#define P9030_CS1BASE 0x40
#define P9030_CS2BASE 0x44
#define P9030_CS3BASE 0x48
-#define P9030_INTCSR 0x4c
-#define P9030_CNTRL 0x50
+#define P9030_INTCSR 0x4c
+#define P9030_CNTRL 0x50
#define P9030_GPIOC 0x54
/* typedefs */
diff --git a/board/cray/L1/L1.h b/board/cray/L1/L1.h
index 1b41824..c3a0b8f 100644
--- a/board/cray/L1/L1.h
+++ b/board/cray/L1/L1.h
@@ -26,7 +26,7 @@
*
* Start Address Length
* +++++++++++++++++++++++++ 0xFFC0_0000 Start of Flash -----------------
- * | Failsafe Linux Image | (1M)
+ * | Failsafe Linux Image | (1M)
* +=======================+ 0xFFD0_0000
* | (Reserved FlashFiles) | (1M)
* +=======================+ 0xFFE0_0000
@@ -36,7 +36,7 @@
* | U N U S E D |
* | |
* +-----------------------+ 0xFFFD_0000 U-Boot image header (64 bytes)
- * | environment settings | (64k)
+ * | environment settings | (64k)
* +-----------------------+ 0xFFFE_0000 U-Boot image header (64 bytes)
* | U-Boot | 0xFFFE_0040 _start of U-Boot
* | | 0xFFFE_FFFC reset vector - branch to _start
diff --git a/board/cray/L1/u-boot.lds b/board/cray/L1/u-boot.lds
index 56c6cdb..a6bbef3 100644
--- a/board/cray/L1/u-boot.lds
+++ b/board/cray/L1/u-boot.lds
@@ -39,11 +39,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug
index 88dcaf9..0552994 100644
--- a/board/cray/L1/u-boot.lds.debug
+++ b/board/cray/L1/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/csb226/lowlevel_init.S b/board/csb226/lowlevel_init.S
index aa9dcba..4c9f10f 100644
--- a/board/csb226/lowlevel_init.S
+++ b/board/csb226/lowlevel_init.S
@@ -43,7 +43,7 @@ _TEXT_BASE:
/*
- * Memory setup
+ * Memory setup
*/
.globl lowlevel_init
@@ -129,8 +129,8 @@ lowlevel_init:
/*loop: */
/* */
/* ldr r0, =0xB0070001 */
-/* ldr r1, =_LED */
-/* str r0, [r1] / hex display */
+/* ldr r1, =_LED */
+/* str r0, [r1] / hex display */
/* ---------------------------------------------------------------- */
@@ -239,7 +239,7 @@ mem_init:
/* Before accessing MDREFR we need a valid DRI field, so we set */
/* this to power on defaults + DRI field. */
- ldr r3, =CFG_MDREFR_VAL
+ ldr r3, =CFG_MDREFR_VAL
ldr r2, =0xFFF
and r3, r3, r2
ldr r4, =0x03ca4000
diff --git a/board/csb272/u-boot.lds b/board/csb272/u-boot.lds
index 44af70e..947fbd6 100644
--- a/board/csb272/u-boot.lds
+++ b/board/csb272/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/csb472/u-boot.lds b/board/csb472/u-boot.lds
index 0021918..de3643e 100644
--- a/board/csb472/u-boot.lds
+++ b/board/csb472/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c
index 64fe948..ec742ad 100644
--- a/board/dave/B2/B2.c
+++ b/board/dave/B2/B2.c
@@ -78,16 +78,16 @@ int board_init (void)
INTCON = 0x05;
/*
- Configure chip ethernet interrupt as High level
- Port G EINT 0-7 EINT0 -> CHIP ETHERNET
+ Configure chip ethernet interrupt as High level
+ Port G EINT 0-7 EINT0 -> CHIP ETHERNET
*/
temp = EXTINT;
- temp &= ~0x7;
+ temp &= ~0x7;
temp |= 0x1; /*LEVEL_HIGH*/
EXTINT = temp;
/*
- Reset SMSC LAN91C96 chip
+ Reset SMSC LAN91C96 chip
*/
temp= PCONF;
temp |= 0x00000040;
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
index 289bff2..3037a04 100644
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c
index dce821b..88b1e57 100644
--- a/board/davinci/dv-evm/dv_board.c
+++ b/board/davinci/dv-evm/dv_board.c
@@ -73,7 +73,7 @@ void lpsc_on(unsigned int id)
(id == DAVINCI_LPSC_McBSP) ||
(id == DAVINCI_LPSC_GPIO)
)
- *mdctl |= 0x200;
+ *mdctl |= 0x200;
REG(PSC_PTCMD) = 0x01;
diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/dv_board.c
index 0a07523..13d2195 100644
--- a/board/davinci/schmoogie/dv_board.c
+++ b/board/davinci/schmoogie/dv_board.c
@@ -73,7 +73,7 @@ void lpsc_on(unsigned int id)
(id == DAVINCI_LPSC_McBSP) ||
(id == DAVINCI_LPSC_GPIO)
)
- *mdctl |= 0x200;
+ *mdctl |= 0x200;
REG(PSC_PTCMD) = 0x01;
diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c
index cd2dac6..e8665e5 100644
--- a/board/davinci/sonata/dv_board.c
+++ b/board/davinci/sonata/dv_board.c
@@ -73,7 +73,7 @@ void lpsc_on(unsigned int id)
(id == DAVINCI_LPSC_McBSP) ||
(id == DAVINCI_LPSC_GPIO)
)
- *mdctl |= 0x200;
+ *mdctl |= 0x200;
REG(PSC_PTCMD) = 0x01;
diff --git a/board/eltec/bab7xx/u-boot.lds b/board/eltec/bab7xx/u-boot.lds
index 25e16de..1a95755 100644
--- a/board/eltec/bab7xx/u-boot.lds
+++ b/board/eltec/bab7xx/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/eltec/elppc/u-boot.lds b/board/eltec/elppc/u-boot.lds
index 25e16de..1a95755 100644
--- a/board/eltec/elppc/u-boot.lds
+++ b/board/eltec/elppc/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds
index 94ab745..85117aa 100644
--- a/board/eltec/mhpc/u-boot.lds
+++ b/board/eltec/mhpc/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug
index 1a25a98..85072fe 100644
--- a/board/eltec/mhpc/u-boot.lds.debug
+++ b/board/eltec/mhpc/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds
index 2168087..97ef89a 100644
--- a/board/emk/top860/u-boot.lds
+++ b/board/emk/top860/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/emk/top860/u-boot.lds.debug b/board/emk/top860/u-boot.lds.debug
index 25bbd26..5d97095 100644
--- a/board/emk/top860/u-boot.lds.debug
+++ b/board/emk/top860/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ep8260/flash.c b/board/ep8260/flash.c
index 278d606..966a345 100644
--- a/board/ep8260/flash.c
+++ b/board/ep8260/flash.c
@@ -72,7 +72,7 @@ ulong flash_get_size( ulong baseaddr, flash_info_t *info )
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
- return (0); /* no or unknown flash */
+ return (0); /* no or unknown flash */
}
flashtest_h = V_ULONG(baseaddr + 8); /* device ID */
@@ -91,11 +91,11 @@ ulong flash_get_size( ulong baseaddr, flash_info_t *info )
case AMD_ID_LV640U: /* AMDLV640 and AMDLV641 have same ID */
info->flash_id += FLASH_AMLV640U;
info->sector_count = 128;
- info->size = 0x02000000; /* 4 * 8 MB = 32 MB */
+ info->size = 0x02000000; /* 4 * 8 MB = 32 MB */
break;
default:
info->flash_id = FLASH_UNKNOWN;
- return(0); /* no or unknown flash */
+ return(0); /* no or unknown flash */
}
if(flashtest_h == AMD_ID_LV640U) {
diff --git a/board/ep82xxm/ep82xxm.c b/board/ep82xxm/ep82xxm.c
index fe3f78e..27443d3 100644
--- a/board/ep82xxm/ep82xxm.c
+++ b/board/ep82xxm/ep82xxm.c
@@ -46,146 +46,146 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* Port A */
{ /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 0, 0, 0, 0, 0, 1 }, /* PA31 */
- /* PA30 */ { 0, 0, 0, 0, 0, 1 }, /* PA30 */
- /* PA29 */ { 0, 0, 0, 0, 0, 1 }, /* PA29 */
- /* PA28 */ { 0, 0, 0, 0, 0, 1 }, /* PA28 */
- /* PA27 */ { 0, 0, 0, 0, 0, 1 }, /* PA27 */
- /* PA26 */ { 0, 0, 0, 0, 0, 1 }, /* PA26 */
- /* PA25 */ { 0, 0, 0, 0, 0, 1 }, /* PA25 */
- /* PA24 */ { 0, 0, 0, 0, 0, 1 }, /* PA24 */
- /* PA23 */ { 0, 0, 0, 0, 0, 1 }, /* PA23 */
- /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
- /* PA21 */ { 0, 0, 0, 0, 0, 1 }, /* PA21 */
- /* PA20 */ { 0, 0, 0, 0, 0, 1 }, /* PA20 */
- /* PA19 */ { 0, 0, 0, 0, 0, 1 }, /* PA19 */
- /* PA18 */ { 0, 0, 0, 0, 0, 1 }, /* PA18 */
- /* PA17 */ { 0, 0, 0, 0, 0, 1 }, /* PA17 */
- /* PA16 */ { 0, 0, 0, 0, 0, 1 }, /* PA16 */
- /* PA15 */ { 0, 0, 0, 0, 0, 1 }, /* PA15 */
- /* PA14 */ { 0, 0, 0, 0, 0, 1 }, /* PA14 */
- /* PA13 */ { 0, 0, 0, 0, 0, 1 }, /* PA13 */
- /* PA12 */ { 0, 0, 0, 0, 0, 1 }, /* PA12 */
- /* PA11 */ { 0, 0, 0, 0, 0, 1 }, /* PA11 */
- /* PA10 */ { 0, 0, 0, 0, 0, 1 }, /* PA10 */
- /* PA9 */ { 1, 1, 0, 1, 0, 1 }, /* SMC2 TxD */
- /* PA8 */ { 1, 1, 0, 0, 0, 1 }, /* SMC2 RxD */
- /* PA7 */ { 0, 0, 0, 0, 0, 1 }, /* PA7 */
- /* PA6 */ { 0, 0, 0, 0, 0, 1 }, /* PA6 */
- /* PA5 */ { 0, 0, 0, 0, 0, 1 }, /* PA5 */
- /* PA4 */ { 0, 0, 0, 0, 0, 1 }, /* PA4 */
- /* PA3 */ { 0, 0, 0, 0, 0, 1 }, /* PA3 */
- /* PA2 */ { 0, 0, 0, 0, 0, 1 }, /* PA2 */
- /* PA1 */ { 0, 0, 0, 0, 0, 1 }, /* PA1 */
- /* PA0 */ { 0, 0, 0, 0, 0, 1 } /* PA0 */
+ /* PA31 */ { 0, 0, 0, 0, 0, 1 }, /* PA31 */
+ /* PA30 */ { 0, 0, 0, 0, 0, 1 }, /* PA30 */
+ /* PA29 */ { 0, 0, 0, 0, 0, 1 }, /* PA29 */
+ /* PA28 */ { 0, 0, 0, 0, 0, 1 }, /* PA28 */
+ /* PA27 */ { 0, 0, 0, 0, 0, 1 }, /* PA27 */
+ /* PA26 */ { 0, 0, 0, 0, 0, 1 }, /* PA26 */
+ /* PA25 */ { 0, 0, 0, 0, 0, 1 }, /* PA25 */
+ /* PA24 */ { 0, 0, 0, 0, 0, 1 }, /* PA24 */
+ /* PA23 */ { 0, 0, 0, 0, 0, 1 }, /* PA23 */
+ /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
+ /* PA21 */ { 0, 0, 0, 0, 0, 1 }, /* PA21 */
+ /* PA20 */ { 0, 0, 0, 0, 0, 1 }, /* PA20 */
+ /* PA19 */ { 0, 0, 0, 0, 0, 1 }, /* PA19 */
+ /* PA18 */ { 0, 0, 0, 0, 0, 1 }, /* PA18 */
+ /* PA17 */ { 0, 0, 0, 0, 0, 1 }, /* PA17 */
+ /* PA16 */ { 0, 0, 0, 0, 0, 1 }, /* PA16 */
+ /* PA15 */ { 0, 0, 0, 0, 0, 1 }, /* PA15 */
+ /* PA14 */ { 0, 0, 0, 0, 0, 1 }, /* PA14 */
+ /* PA13 */ { 0, 0, 0, 0, 0, 1 }, /* PA13 */
+ /* PA12 */ { 0, 0, 0, 0, 0, 1 }, /* PA12 */
+ /* PA11 */ { 0, 0, 0, 0, 0, 1 }, /* PA11 */
+ /* PA10 */ { 0, 0, 0, 0, 0, 1 }, /* PA10 */
+ /* PA9 */ { 1, 1, 0, 1, 0, 1 }, /* SMC2 TxD */
+ /* PA8 */ { 1, 1, 0, 0, 0, 1 }, /* SMC2 RxD */
+ /* PA7 */ { 0, 0, 0, 0, 0, 1 }, /* PA7 */
+ /* PA6 */ { 0, 0, 0, 0, 0, 1 }, /* PA6 */
+ /* PA5 */ { 0, 0, 0, 0, 0, 1 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 0, 0, 1 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 0, 0, 1 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 0, 0, 1 }, /* PA2 */
+ /* PA1 */ { 0, 0, 0, 0, 0, 1 }, /* PA1 */
+ /* PA0 */ { 0, 0, 0, 0, 0, 1 } /* PA0 */
},
/* Port B */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
- /* PB30 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
- /* PB29 */ { CFG_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
- /* PB28 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
- /* PB27 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
- /* PB26 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
- /* PB25 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
- /* PB24 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
- /* PB23 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
- /* PB22 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
- /* PB21 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
- /* PB20 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
- /* PB19 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
- /* PB18 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
- /* PB17 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
- /* PB16 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
- /* PB15 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
- /* PB14 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
- /* PB13 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:COL */
- /* PB12 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
- /* PB11 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB10 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB9 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB8 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
- /* PB6 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB5 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB4 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { CFG_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
+ /* PB16 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
+ /* PB15 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
+ /* PB14 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
+ /* PB13 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:COL */
+ /* PB12 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
+ /* PB11 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB10 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB9 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB8 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
+ /* PB6 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB5 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB4 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
},
/* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
- /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
- /* PC29 */ { 1, 1, 1, 0, 0, 0 }, /* SCC1 CTS# */
- /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
- /* PC27 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3: TXD[0] */
- /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
- /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
- /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
- /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
- /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
- /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */
- /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */
- /* PC19 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* RxClk (CLK13) */
- /* PC18 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* TxClk (CLK14) */
- /* PC17 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* RxClk (CLK15) */
- /* PC16 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* TxClk (CLK16) */
- /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */
- /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 CD# */
- /* PC13 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 CTS# */
- /* PC12 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 CD# */
- /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */
- /* PC10 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 CD# */
- /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */
- /* PC8 */ { 1, 1, 1, 0, 0, 0 }, /* SCC3 CTS# */
- /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
- /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
- /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
- /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
- /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
- /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
- /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
- /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
+ /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
+ /* PC29 */ { 1, 1, 1, 0, 0, 0 }, /* SCC1 CTS# */
+ /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
+ /* PC27 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3: TXD[0] */
+ /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
+ /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
+ /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
+ /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
+ /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
+ /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */
+ /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */
+ /* PC19 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* RxClk (CLK13) */
+ /* PC18 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* TxClk (CLK14) */
+ /* PC17 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* RxClk (CLK15) */
+ /* PC16 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* TxClk (CLK16) */
+ /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */
+ /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 CD# */
+ /* PC13 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 CTS# */
+ /* PC12 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 CD# */
+ /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */
+ /* PC10 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 CD# */
+ /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */
+ /* PC8 */ { 1, 1, 1, 0, 0, 0 }, /* SCC3 CTS# */
+ /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
+ /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
+ /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
+ /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
+ /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
+ /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
+ /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
},
/* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RXD */
- /* PD30 */ { 1, 1, 1, 1, 0, 1 }, /* SCC1 TXD */
- /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS# */
- /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RXD */
- /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TXD */
- /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS# */
- /* PD25 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RXD */
- /* PD24 */ { 1, 1, 0, 1, 0, 0 }, /* SCC3 TXD */
- /* PD23 */ { 1, 1, 0, 1, 0, 0 }, /* SCC3 RTS# */
- /* PD22 */ { 0, 0, 0, 0, 0, 1 }, /* PD22 */
- /* PD21 */ { 0, 0, 0, 0, 0, 1 }, /* PD21 */
- /* PD20 */ { 0, 0, 0, 0, 0, 1 }, /* PD20 */
- /* PD19 */ { 0, 0, 0, 0, 0, 1 }, /* PD19 */
- /* PD18 */ { 0, 0, 0, 0, 0, 1 }, /* PD18 */
- /* PD17 */ { 0, 0, 0, 0, 0, 1 }, /* PD17 */
- /* PD16 */ { 0, 0, 0, 0, 0, 1 }, /* PD16 */
- /* PD15 */ { 1, 1, 1, 0, 1, 1 }, /* I2C SDA */
- /* PD14 */ { 1, 1, 1, 0, 1, 1 }, /* I2C SCL */
- /* PD13 */ { 0, 0, 0, 0, 0, 1 }, /* PD13 */
- /* PD12 */ { 0, 0, 0, 0, 0, 1 }, /* PD12 */
- /* PD11 */ { 0, 0, 0, 0, 0, 1 }, /* PD11 */
- /* PD10 */ { 0, 0, 0, 0, 0, 1 }, /* PD10 */
- /* PD9 */ { 1, 1, 0, 1, 0, 1 }, /* SMC1 TxD */
- /* PD8 */ { 1, 1, 0, 0, 0, 1 }, /* SMC1 RxD */
- /* PD7 */ { 1, 1, 0, 0, 0, 1 }, /* SMC1 SMSYN */
- /* PD6 */ { 0, 0, 0, 0, 0, 1 }, /* PD6 */
- /* PD5 */ { 0, 0, 0, 0, 0, 1 }, /* PD5 */
- /* PD4 */ { 0, 0, 0, 0, 0, 1 }, /* PD4 */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RXD */
+ /* PD30 */ { 1, 1, 1, 1, 0, 1 }, /* SCC1 TXD */
+ /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS# */
+ /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RXD */
+ /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TXD */
+ /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS# */
+ /* PD25 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RXD */
+ /* PD24 */ { 1, 1, 0, 1, 0, 0 }, /* SCC3 TXD */
+ /* PD23 */ { 1, 1, 0, 1, 0, 0 }, /* SCC3 RTS# */
+ /* PD22 */ { 0, 0, 0, 0, 0, 1 }, /* PD22 */
+ /* PD21 */ { 0, 0, 0, 0, 0, 1 }, /* PD21 */
+ /* PD20 */ { 0, 0, 0, 0, 0, 1 }, /* PD20 */
+ /* PD19 */ { 0, 0, 0, 0, 0, 1 }, /* PD19 */
+ /* PD18 */ { 0, 0, 0, 0, 0, 1 }, /* PD18 */
+ /* PD17 */ { 0, 0, 0, 0, 0, 1 }, /* PD17 */
+ /* PD16 */ { 0, 0, 0, 0, 0, 1 }, /* PD16 */
+ /* PD15 */ { 1, 1, 1, 0, 1, 1 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 1 }, /* I2C SCL */
+ /* PD13 */ { 0, 0, 0, 0, 0, 1 }, /* PD13 */
+ /* PD12 */ { 0, 0, 0, 0, 0, 1 }, /* PD12 */
+ /* PD11 */ { 0, 0, 0, 0, 0, 1 }, /* PD11 */
+ /* PD10 */ { 0, 0, 0, 0, 0, 1 }, /* PD10 */
+ /* PD9 */ { 1, 1, 0, 1, 0, 1 }, /* SMC1 TxD */
+ /* PD8 */ { 1, 1, 0, 0, 0, 1 }, /* SMC1 RxD */
+ /* PD7 */ { 1, 1, 0, 0, 0, 1 }, /* SMC1 SMSYN */
+ /* PD6 */ { 0, 0, 0, 0, 0, 1 }, /* PD6 */
+ /* PD5 */ { 0, 0, 0, 0, 0, 1 }, /* PD5 */
+ /* PD4 */ { 0, 0, 0, 0, 0, 1 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
}
};
@@ -230,8 +230,8 @@ long int initdram(int board_type)
uint psdmr = CFG_PSDMR;
int i;
- unsigned char ramtmp;
- unsigned char *ramptr1 = (unsigned char *)0x00000110;
+ unsigned char ramtmp;
+ unsigned char *ramptr1 = (unsigned char *)0x00000110;
memctl->memc_mptpr = CFG_MPTPR;
diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds
index 2a763ad..3545142 100644
--- a/board/ep88x/u-boot.lds
+++ b/board/ep88x/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/eric/flash.c b/board/eric/flash.c
index c08a760..2c7d2a0 100644
--- a/board/eric/flash.c
+++ b/board/eric/flash.c
@@ -564,17 +564,17 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x00400000;
- break; /* => 32 MBit */
+ break; /* => 32 MBit */
case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
- break; /* => 64 MBit */
+ break; /* => 64 MBit */
case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
- break; /* => 128 MBit */
+ break; /* => 128 MBit */
default:
/* FIXME*/
@@ -981,148 +981,151 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
* 2 - Flash not erased
*/
#ifndef CFG_FLASH_16BIT
-static int write_word (flash_info_t *info, ulong dest, ulong data)
+static int write_word (flash_info_t * info, ulong dest, ulong data)
{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start,barf;
+ vu_long *addr = (vu_long *) (info->start[0]);
+ ulong start, barf;
int flag;
/* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
+ if ((*((vu_long *) dest) & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ flag = disable_interrupts ();
- if(info->flash_id > FLASH_AMD_COMP) {
- /* AMD stuff */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
- } else {
- /* intel stuff */
- *addr = 0x00400040;
- }
- *((vu_long *)dest) = data;
+ if (info->flash_id > FLASH_AMD_COMP) {
+ /* AMD stuff */
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+ } else {
+ /* intel stuff */
+ *addr = 0x00400040;
+ }
+ *((vu_long *) dest) = data;
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts ();
/* data polling for D7 */
start = get_timer (0);
- if(info->flash_id > FLASH_AMD_COMP) {
+ if (info->flash_id > FLASH_AMD_COMP) {
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
+ while ((*((vu_long *) dest) & 0x00800080) !=
+ (data & 0x00800080)) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
}
- }
- } else {
+ } else {
- while(!(addr[0] & 0x00800080)){ /* wait for error or finish */
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
+ while (!(addr[0] & 0x00800080)) { /* wait for error or finish */
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
- if( addr[0] & 0x003A003A) { /* check for error */
- barf = addr[0] & 0x003A0000;
- if( barf ) {
- barf >>=16;
- } else {
- barf = addr[0] & 0x0000003A;
- }
- printf("\nFlash write error at address %lx\n",(unsigned long)dest);
- if(barf & 0x0002) printf("Block locked, not erased.\n");
- if(barf & 0x0010) printf("Programming error.\n");
- if(barf & 0x0008) printf("Vpp Low error.\n");
- return(2);
- }
+ if (addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if (barf) {
+ barf >>= 16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
+ printf ("\nFlash write error at address %lx\n",
+ (unsigned long) dest);
+ if (barf & 0x0002)
+ printf ("Block locked, not erased.\n");
+ if (barf & 0x0010)
+ printf ("Programming error.\n");
+ if (barf & 0x0008)
+ printf ("Vpp Low error.\n");
+ return (2);
+ }
- }
+ }
- return (0);
+ return (0);
-}
+ }
#else
-static int write_short (flash_info_t *info, ulong dest, ushort data)
+static int write_short (flash_info_t * info, ulong dest, ushort data)
{
- vu_short *addr = (vu_short*)(info->start[0]);
- ulong start,barf;
+ vu_short *addr = (vu_short *) (info->start[0]);
+ ulong start, barf;
int flag;
/* Check if Flash is (sufficiently) erased */
- if ((*((vu_short *)dest) & data) != data) {
+ if ((*((vu_short *) dest) & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ flag = disable_interrupts ();
- if(info->flash_id < FLASH_AMD_COMP) {
- /* AMD stuff */
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
- addr[0x0555] = 0x00A0;
- } else {
- /* intel stuff */
- *addr = 0x00D0;
- *addr = 0x0040;
- }
- *((vu_short *)dest) = data;
+ if (info->flash_id < FLASH_AMD_COMP) {
+ /* AMD stuff */
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x00A0;
+ } else {
+ /* intel stuff */
+ *addr = 0x00D0;
+ *addr = 0x0040;
+ }
+ *((vu_short *) dest) = data;
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts ();
/* data polling for D7 */
start = get_timer (0);
- if(info->flash_id < FLASH_AMD_COMP) {
- /* AMD stuff */
- while ((*((vu_short *)dest) & 0x0080) != (data & 0x0080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
+ if (info->flash_id < FLASH_AMD_COMP) {
+ /* AMD stuff */
+ while ((*((vu_short *) dest) & 0x0080) != (data & 0x0080)) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
}
- }
- } else {
- /* intel stuff */
- while(!(addr[0] & 0x0080)){ /* wait for error or finish */
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
- }
+ } else {
+ /* intel stuff */
+ while (!(addr[0] & 0x0080)) { /* wait for error or finish */
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+ return (1);
+ }
- if( addr[0] & 0x003A) { /* check for error */
- barf = addr[0] & 0x003A;
- printf("\nFlash write error at address %lx\n",(unsigned long)dest);
- if(barf & 0x0002) printf("Block locked, not erased.\n");
- if(barf & 0x0010) printf("Programming error.\n");
- if(barf & 0x0008) printf("Vpp Low error.\n");
- return(2);
- }
- *addr = 0x00B0;
- *addr = 0x0070;
- while(!(addr[0] & 0x0080)){ /* wait for error or finish */
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+ if (addr[0] & 0x003A) { /* check for error */
+ barf = addr[0] & 0x003A;
+ printf ("\nFlash write error at address %lx\n",
+ (unsigned long) dest);
+ if (barf & 0x0002)
+ printf ("Block locked, not erased.\n");
+ if (barf & 0x0010)
+ printf ("Programming error.\n");
+ if (barf & 0x0008)
+ printf ("Vpp Low error.\n");
+ return (2);
+ }
+ *addr = 0x00B0;
+ *addr = 0x0070;
+ while (!(addr[0] & 0x0080)) { /* wait for error or finish */
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+ return (1);
+ }
+ *addr = 0x00FF;
}
-
- *addr = 0x00FF;
-
- }
-
return (0);
-
}
-
-
#endif
-
-/*-----------------------------------------------------------------------
- */
+/*-----------------------------------------------------------------------*/
diff --git a/board/eric/u-boot.lds b/board/eric/u-boot.lds
index 799002f..00e35a6 100644
--- a/board/eric/u-boot.lds
+++ b/board/eric/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/adciop/u-boot.lds b/board/esd/adciop/u-boot.lds
index 50250b1..db65fe6 100644
--- a/board/esd/adciop/u-boot.lds
+++ b/board/esd/adciop/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/apc405/u-boot.lds b/board/esd/apc405/u-boot.lds
index f5daaef..21547ac 100644
--- a/board/esd/apc405/u-boot.lds
+++ b/board/esd/apc405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/ar405/u-boot.lds b/board/esd/ar405/u-boot.lds
index f4b5e3a..b072bbb 100644
--- a/board/esd/ar405/u-boot.lds
+++ b/board/esd/ar405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/ash405/u-boot.lds b/board/esd/ash405/u-boot.lds
index 1c5d891..644174a 100644
--- a/board/esd/ash405/u-boot.lds
+++ b/board/esd/ash405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/canbt/u-boot.lds b/board/esd/canbt/u-boot.lds
index 07e8110..e66db5d 100644
--- a/board/esd/canbt/u-boot.lds
+++ b/board/esd/canbt/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 2cdd7be..3d4f237 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -92,7 +92,7 @@ int misc_init_r (void)
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
- /*
+ /*
* Setup and enable EEPROM write protection
*/
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
diff --git a/board/esd/cms700/u-boot.lds b/board/esd/cms700/u-boot.lds
index f5daaef..21547ac 100644
--- a/board/esd/cms700/u-boot.lds
+++ b/board/esd/cms700/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/cpci2dp/u-boot.lds b/board/esd/cpci2dp/u-boot.lds
index f5daaef..21547ac 100644
--- a/board/esd/cpci2dp/u-boot.lds
+++ b/board/esd/cpci2dp/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/cpci405/u-boot.lds b/board/esd/cpci405/u-boot.lds
index f5daaef..21547ac 100644
--- a/board/esd/cpci405/u-boot.lds
+++ b/board/esd/cpci405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/cpci5200/Makefile b/board/esd/cpci5200/Makefile
index 276eabb..673a5b9 100644
--- a/board/esd/cpci5200/Makefile
+++ b/board/esd/cpci5200/Makefile
@@ -30,8 +30,8 @@ LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
# CPLD = ../common/xilinx_jtag/lenval.o \
-# ../common/xilinx_jtag/micro.o \
-# ../common/xilinx_jtag/ports.o
+# ../common/xilinx_jtag/micro.o \
+# ../common/xilinx_jtag/ports.o
# COBJS = $(BOARD).o flash.o $(CPLD)
COBJS = $(BOARD).o strataflash.o
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c
index 25c10e0..fa8d3bd 100644
--- a/board/esd/cpci750/mpsc.c
+++ b/board/esd/cpci750/mpsc.c
@@ -426,7 +426,7 @@ void mpsc_sdma_init (void)
(MV64360_SDMA_WIN_ACCESS_FULL <<
(MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
-/* Setup MPSC internal address space base address */
+/* Setup MPSC internal address space base address */
GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
/* no high address remap*/
diff --git a/board/esd/cpci750/mpsc.h b/board/esd/cpci750/mpsc.h
index a03d1cc..aa0f862 100644
--- a/board/esd/cpci750/mpsc.h
+++ b/board/esd/cpci750/mpsc.h
@@ -67,9 +67,9 @@ extern int (*mpsc_test_char)(void);
#define TX_STOP 0x00010000
#define RX_ENABLE 0x00000080
-#define SDMA_RX_ABORT (1 << 15)
-#define SDMA_TX_ABORT (1 << 31)
-#define MPSC_TX_ABORT (1 << 7)
+#define SDMA_RX_ABORT (1 << 15)
+#define SDMA_TX_ABORT (1 << 31)
+#define MPSC_TX_ABORT (1 << 7)
#define MPSC_RX_ABORT (1 << 23)
#define MPSC_ENTER_HUNT (1 << 31)
diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c
index bc84ef0..1c21527 100644
--- a/board/esd/cpci750/mv_eth.c
+++ b/board/esd/cpci750/mv_eth.c
@@ -1392,7 +1392,7 @@ u32 mv_get_internal_sram_base (void)
* port_phy_addr).
*
* INPUT:
-* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
*
* OUTPUT:
* See description.
@@ -1552,7 +1552,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl)
* ether_init_rx_desc_ring for Rx queues).
*
* INPUT:
-* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
+* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct
*
* OUTPUT:
* Ethernet port is ready to receive and transmit.
@@ -1642,7 +1642,7 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl)
* INPUT:
* ETH_PORT eth_port_num Port number.
* char * p_addr Address to be set
-* ETH_QUEUE queue Rx queue number for this MAC address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
*
* OUTPUT:
* Set MAC address low and high registers. also calls eth_port_uc_addr()
@@ -1680,10 +1680,10 @@ static void eth_port_uc_addr_set (ETH_PORT eth_port_num,
* parameters.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
+* ETH_PORT eth_port_num Port number.
* unsigned char uc_nibble Unicast MAC Address last nibble.
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* This function add/removes MAC addresses from the port unicast address
@@ -1762,10 +1762,10 @@ static bool eth_port_uc_addr (ETH_PORT eth_port_num,
* In this case, the function calculates the CRC-8bit value and calls
* eth_port_omc_addr() routine to set the Other Multicast Table.
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char *p_addr Unicast MAC Address.
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char *p_addr Unicast MAC Address.
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -1896,10 +1896,10 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num,
* according to the argument given.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -1960,10 +1960,10 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num,
* CRC-8 argument given.
*
* INPUT:
-* ETH_PORT eth_port_num Port number.
-* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
-* ETH_QUEUE queue Rx queue number for this MAC address.
-* int option 0 = Add, 1 = remove address.
+* ETH_PORT eth_port_num Port number.
+* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+* ETH_QUEUE queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
*
* OUTPUT:
* See description.
@@ -2204,7 +2204,7 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num)
* eth_port_reset - Reset Ethernet port
*
* DESCRIPTION:
- * This routine resets the chip by aborting any SDMA engine activity and
+ * This routine resets the chip by aborting any SDMA engine activity and
* clearing the MIB counters. The Receiver and the Transmit unit are in
* idle state after this command is performed and the port is disabled.
*
@@ -2557,9 +2557,9 @@ static void eth_set_access_control (ETH_PORT eth_port_num,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
- * int rx_desc_num Number of Rx descriptors
- * int rx_buff_size Size of Rx buffer
+ * ETH_QUEUE rx_queue Number of Rx queue.
+ * int rx_desc_num Number of Rx descriptors
+ * int rx_buff_size Size of Rx buffer
* unsigned int rx_desc_base_addr Rx descriptors memory area base addr.
* unsigned int rx_buff_base_addr Rx buffer memory area base addr.
*
@@ -2651,9 +2651,9 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
- * int tx_desc_num Number of Tx descriptors
- * int tx_buff_size Size of Tx buffer
+ * ETH_QUEUE tx_queue Number of Tx queue.
+ * int tx_desc_num Number of Tx descriptors
+ * int tx_buff_size Size of Tx buffer
* unsigned int tx_desc_base_addr Tx descriptors memory area base addr.
* unsigned int tx_buff_base_addr Tx buffer memory area base addr.
*
@@ -2746,7 +2746,7 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
+ * ETH_QUEUE tx_queue Number of Tx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2862,7 +2862,7 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE tx_queue Number of Tx queue.
+ * ETH_QUEUE tx_queue Number of Tx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2931,7 +2931,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
* eth_port_receive - Get received information from Rx ring.
*
* DESCRIPTION:
- * This routine returns the received data to the caller. There is no
+ * This routine returns the received data to the caller. There is no
* data copying during routine operation. All information is returned
* using pointer to packet information struct passed from the caller.
* If the routine exhausts Rx ring resources then the resource error flag
@@ -2939,7 +2939,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO *
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
+ * ETH_QUEUE rx_queue Number of Rx queue.
* PKT_INFO *p_pkt_info User packet buffer.
*
* OUTPUT:
@@ -2981,7 +2981,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
/* Nothing to receive... */
if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
-/* DP(printf("Rx: command_status: %08x\n", command_status)); */
+/* DP(printf("Rx: command_status: %08x\n", command_status)); */
D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0);
/* DP(printf("\nETH_END_OF_JOB ...\n"));*/
return ETH_END_OF_JOB;
@@ -3020,7 +3020,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl,
*
* INPUT:
* ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct.
- * ETH_QUEUE rx_queue Number of Rx queue.
+ * ETH_QUEUE rx_queue Number of Rx queue.
* PKT_INFO *p_pkt_info Information on the returned buffer.
*
* OUTPUT:
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index 78d1880..f43e83f 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -106,7 +106,7 @@ memory_map_bank(unsigned int bankNo,
return 0;
}
-#define GB (1 << 30)
+#define GB (1 << 30)
/* much of this code is based on (or is) the code in the pip405 port */
/* thanks go to the authors of said port - Josh */
@@ -134,86 +134,85 @@ typedef enum _max_CL_supported_SD {SD_CL_1=1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL
/* SDRAM/DDR information struct */
-typedef struct _gtMemoryDimmInfo
-{
- MEMORY_TYPE memoryType;
- unsigned int numOfRowAddresses;
- unsigned int numOfColAddresses;
- unsigned int numOfModuleBanks;
- unsigned int dataWidth;
- VOLTAGE_INTERFACE voltageInterface;
- unsigned int errorCheckType; /* ECC , PARITY..*/
- unsigned int sdramWidth; /* 4,8,16 or 32 */;
- unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */
- unsigned int minClkDelay;
- unsigned int burstLengthSupported;
- unsigned int numOfBanksOnEachDevice;
- unsigned int suportedCasLatencies;
- unsigned int RefreshInterval;
- unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */
- unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns)*/
- MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
- MAX_CL_SUPPORTED_SD maxClSupported_SD;
- unsigned int moduleBankDensity;
- /* module attributes (true for yes) */
- bool bufferedAddrAndControlInputs;
- bool registeredAddrAndControlInputs;
- bool onCardPLL;
- bool bufferedDQMBinputs;
- bool registeredDQMBinputs;
- bool differentialClockInput;
- bool redundantRowAddressing;
-
- /* module general attributes */
- bool suportedAutoPreCharge;
- bool suportedPreChargeAll;
- bool suportedEarlyRasPreCharge;
- bool suportedWrite1ReadBurst;
- bool suported5PercentLowVCC;
- bool suported5PercentUpperVCC;
- /* module timing parameters */
- unsigned int minRasToCasDelay;
- unsigned int minRowActiveRowActiveDelay;
- unsigned int minRasPulseWidth;
- unsigned int minRowPrechargeTime; /* measured in ns */
-
- int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */
- int addrAndCommandSetupTime; /* (measured in ns/100) */
- int dataInputSetupTime; /* LoP left of point (measured in ns) */
- int dataInputHoldTime; /* LoP left of point (measured in ns) */
+typedef struct _gtMemoryDimmInfo {
+ MEMORY_TYPE memoryType;
+ unsigned int numOfRowAddresses;
+ unsigned int numOfColAddresses;
+ unsigned int numOfModuleBanks;
+ unsigned int dataWidth;
+ VOLTAGE_INTERFACE voltageInterface;
+ unsigned int errorCheckType; /* ECC , PARITY.. */
+ unsigned int sdramWidth; /* 4,8,16 or 32 */ ;
+ unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */
+ unsigned int minClkDelay;
+ unsigned int burstLengthSupported;
+ unsigned int numOfBanksOnEachDevice;
+ unsigned int suportedCasLatencies;
+ unsigned int RefreshInterval;
+ unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */
+ unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns) */
+ MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
+ MAX_CL_SUPPORTED_SD maxClSupported_SD;
+ unsigned int moduleBankDensity;
+ /* module attributes (true for yes) */
+ bool bufferedAddrAndControlInputs;
+ bool registeredAddrAndControlInputs;
+ bool onCardPLL;
+ bool bufferedDQMBinputs;
+ bool registeredDQMBinputs;
+ bool differentialClockInput;
+ bool redundantRowAddressing;
+
+ /* module general attributes */
+ bool suportedAutoPreCharge;
+ bool suportedPreChargeAll;
+ bool suportedEarlyRasPreCharge;
+ bool suportedWrite1ReadBurst;
+ bool suported5PercentLowVCC;
+ bool suported5PercentUpperVCC;
+ /* module timing parameters */
+ unsigned int minRasToCasDelay;
+ unsigned int minRowActiveRowActiveDelay;
+ unsigned int minRasPulseWidth;
+ unsigned int minRowPrechargeTime; /* measured in ns */
+
+ int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */
+ int addrAndCommandSetupTime; /* (measured in ns/100) */
+ int dataInputSetupTime; /* LoP left of point (measured in ns) */
+ int dataInputHoldTime; /* LoP left of point (measured in ns) */
/* tAC times for highest 2nd and 3rd highest CAS Latency values */
- unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */
- unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns)*/
- unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */
- unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns)*/
- unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */
- unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns)*/
-
- unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns)*/
-
- unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns)*/
-
- unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */
- unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns)*/
-
- /* Parameters calculated from
- the extracted DIMM information */
- unsigned int size;
- unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */
- unsigned int numberOfDevices;
- uchar drb_size; /* DRAM size in n*64Mbit */
- uchar slot; /* Slot Number this module is inserted in */
- uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */
+ unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns) */
+ unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns) */
+ unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */
+ unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns) */
+
+ unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns) */
+
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns) */
+
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */
+ unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns) */
+
+ /* Parameters calculated from
+ the extracted DIMM information */
+ unsigned int size;
+ unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */
+ unsigned int numberOfDevices;
+ uchar drb_size; /* DRAM size in n*64Mbit */
+ uchar slot; /* Slot Number this module is inserted in */
+ uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */
#ifdef DEBUG
- uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */
- uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */
- uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */
- unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */
- unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */
- unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */
- uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */
+ uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */
+ uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */
+ uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */
+ unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */
+ unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */
+ unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */
+ uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */
#endif
} AUX_MEM_DIMM_INFO;
@@ -364,31 +363,31 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
dimmInfo->manufactura[i] = data[64 + i];
}
- printf ("\nThis RAM-Module is produced by: %s\n",
+ printf ("\nThis RAM-Module is produced by: %s\n",
dimmInfo->manufactura);
/* find Manul-ID of Dimm Module */
for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
dimmInfo->modul_id[i] = data[73 + i];
}
- printf ("The Module-ID of this RAM-Module is: %s\n",
+ printf ("The Module-ID of this RAM-Module is: %s\n",
dimmInfo->modul_id);
/* find Vendor-Data of Dimm Module */
for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
dimmInfo->vendor_data[i] = data[99 + i];
}
- printf ("Vendor Data of this RAM-Module is: %s\n",
+ printf ("Vendor Data of this RAM-Module is: %s\n",
dimmInfo->vendor_data);
/* find modul_serial_no of Dimm Module */
dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
- printf ("Serial No. of this RAM-Module is: %ld (%lx)\n",
+ printf ("Serial No. of this RAM-Module is: %ld (%lx)\n",
dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
/* find Manufac-Data of Dimm Module */
dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
- printf ("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data[94]); /*dimmInfo->manufac_date */
+ printf ("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data[94]); /*dimmInfo->manufac_date */
/* find modul_revision of Dimm Module */
dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
@@ -396,7 +395,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
/* find manufac_place of Dimm Module */
dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
- printf ("manufac_place of this RAM-Module is: %d\n",
+ printf ("manufac_place of this RAM-Module is: %d\n",
dimmInfo->manufac_place);
#endif
@@ -426,11 +425,11 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
#ifdef DEBUG
if (dimmInfo->memoryType == 0)
DP (printf
- ("Dram_type in slot %d is: SDRAM\n",
+ ("Dram_type in slot %d is: SDRAM\n",
dimmInfo->slot));
if (dimmInfo->memoryType == 1)
DP (printf
- ("Dram_type in slot %d is: DDRAM\n",
+ ("Dram_type in slot %d is: DDRAM\n",
dimmInfo->slot));
#endif
break;
@@ -439,7 +438,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 3: /* Number Of Row Addresses */
dimmInfo->numOfRowAddresses = data[i];
DP (printf
- ("Module Number of row addresses: %d\n",
+ ("Module Number of row addresses: %d\n",
dimmInfo->numOfRowAddresses));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -447,7 +446,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 4: /* Number Of Column Addresses */
dimmInfo->numOfColAddresses = data[i];
DP (printf
- ("Module Number of col addresses: %d\n",
+ ("Module Number of col addresses: %d\n",
dimmInfo->numOfColAddresses));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -463,7 +462,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 6: /* Data Width */
dimmInfo->dataWidth = data[i];
DP (printf
- ("Module Data Width: %d\n",
+ ("Module Data Width: %d\n",
dimmInfo->dataWidth));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -518,7 +517,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
rightOfPoint;
DP (printf
- ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",
+ ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n",
leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -533,7 +532,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->clockToDataOut_LoP = leftOfPoint;
dimmInfo->clockToDataOut_RoP = rightOfPoint;
DP (printf
- ("Clock To Data Out: %d.%2d [ns]\n",
+ ("Clock To Data Out: %d.%2d [ns]\n",
leftOfPoint, rightOfPoint));
/*dimmInfo->clockToDataOut */
break;
@@ -543,7 +542,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 11: /* Error Check Type */
dimmInfo->errorCheckType = data[i];
DP (printf
- ("Error Check Type (0=NONE): %d\n",
+ ("Error Check Type (0=NONE): %d\n",
dimmInfo->errorCheckType));
break;
#endif
@@ -560,7 +559,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 13: /* Sdram Width */
dimmInfo->sdramWidth = data[i];
DP (printf
- ("Sdram Width: %d\n",
+ ("Sdram Width: %d\n",
dimmInfo->sdramWidth));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -568,7 +567,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 14: /* Error Check Data Width */
dimmInfo->errorCheckDataWidth = data[i];
DP (printf
- ("Error Check Data Width: %d\n",
+ ("Error Check Data Width: %d\n",
dimmInfo->errorCheckDataWidth));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -576,7 +575,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 15: /* Minimum Clock Delay */
dimmInfo->minClkDelay = data[i];
DP (printf
- ("Minimum Clock Delay: %d\n",
+ ("Minimum Clock Delay: %d\n",
dimmInfo->minClkDelay));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -585,7 +584,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
/******-******-******-*******
* bit3 | bit2 | bit1 | bit0 *
*******-******-******-*******
- burst length = * 8 | 4 | 2 | 1 *
+ burst length = * 8 | 4 | 2 | 1 *
*****************************
If for example bit0 and bit2 are set, the burst
@@ -594,7 +593,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->burstLengthSupported = data[i];
#ifdef DEBUG
DP (printf
- ("Burst Length Supported: "));
+ ("Burst Length Supported: "));
if (dimmInfo->burstLengthSupported & 0x01)
DP (printf ("1, "));
if (dimmInfo->burstLengthSupported & 0x02)
@@ -611,7 +610,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 17: /* Number Of Banks On Each Device */
dimmInfo->numOfBanksOnEachDevice = data[i];
DP (printf
- ("Number Of Banks On Each Chip: %d\n",
+ ("Number Of Banks On Each Chip: %d\n",
dimmInfo->numOfBanksOnEachDevice));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -622,24 +621,24 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
*******-******-******-******-******-******-******-*******
* bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
*******-******-******-******-******-******-******-*******
- CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
+ CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
*********************************************************
SDRAM:
*******-******-******-******-******-******-******-*******
* bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
*******-******-******-******-******-******-******-*******
- CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
+ CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
********************************************************/
dimmInfo->suportedCasLatencies = data[i];
#ifdef DEBUG
DP (printf
- ("Suported Cas Latencies: (CL) "));
+ ("Suported Cas Latencies: (CL) "));
if (dimmInfo->memoryType == 0) { /* SDRAM */
for (k = 0; k <= 7; k++) {
if (dimmInfo->
suportedCasLatencies & (1 << k))
DP (printf
- ("%d, ",
+ ("%d, ",
k + 1));
}
@@ -738,7 +737,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
maxCASlatencySupported_RoP
= 0;
DP (printf
- ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
+ ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
dimmInfo->
maxCASlatencySupported_LoP,
dimmInfo->
@@ -746,7 +745,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
break;
case SDRAM:
/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
- dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */
+ dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */
DP (printf
("Max. Cas Latencies (SD): %d\n",
dimmInfo->
@@ -886,7 +885,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
(" - lower VCC tolerance: 5 Percent \n"));
else
DP (printf
- (" - lower VCC tolerance: 10 Percent \n"));
+ (" - lower VCC tolerance: 10 Percent \n"));
if (dimmInfo->suported5PercentUpperVCC == 1)
DP (printf
@@ -986,7 +985,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n",
tmemclk, tmemclk / 100, tmemclk % 100));
DP (printf
- ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n",
+ ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n",
leftOfPoint, rightOfPoint, trp_clocks));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1005,7 +1004,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
(dimmInfo->minRowActiveRowActiveDelay +
(tmemclk - 1)) / tmemclk;
DP (printf
- ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n",
+ ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n",
leftOfPoint, rightOfPoint, trp_clocks));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1024,7 +1023,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
(dimmInfo->minRowActiveRowActiveDelay +
(tmemclk - 1)) / tmemclk;
DP (printf
- ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n",
+ ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n",
leftOfPoint, rightOfPoint, trp_clocks));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1035,7 +1034,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
(NSto10PS (data[i]) +
(tmemclk - 1)) / tmemclk;
DP (printf
- ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n",
+ ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n",
dimmInfo->minRasPulseWidth, tras_clocks));
break;
@@ -1044,7 +1043,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
case 31: /* Module Bank Density */
dimmInfo->moduleBankDensity = data[i];
DP (printf
- ("Module Bank Density: %d\n",
+ ("Module Bank Density: %d\n",
dimmInfo->moduleBankDensity));
#ifdef DEBUG
DP (printf
@@ -1095,7 +1094,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->addrAndCommandSetupTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
DP (printf
- ("Address And Command Setup Time [ns]: %d.%d\n",
+ ("Address And Command Setup Time [ns]: %d.%d\n",
sign * leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1122,7 +1121,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->addrAndCommandHoldTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
DP (printf
- ("Address And Command Hold Time [ns]: %d.%d\n",
+ ("Address And Command Hold Time [ns]: %d.%d\n",
sign * leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1149,7 +1148,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->dataInputSetupTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
DP (printf
- ("Data Input Setup Time [ns]: %d.%d\n",
+ ("Data Input Setup Time [ns]: %d.%d\n",
sign * leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1176,7 +1175,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
dimmInfo->dataInputHoldTime =
(leftOfPoint * 100 + rightOfPoint) * sign;
DP (printf
- ("Data Input Hold Time [ns]: %d.%d\n\n",
+ ("Data Input Hold Time [ns]: %d.%d\n\n",
sign * leftOfPoint, rightOfPoint));
break;
/*------------------------------------------------------------------------------------------------------------------------------*/
@@ -1212,7 +1211,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
(dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
tmp *= dimmInfo->numOfModuleBanks;
tmp *= dimmInfo->sdramWidth;
- tmp = tmp >> 24; /* div by 0x4000000 (64M) */
+ tmp = tmp >> 24; /* div by 0x4000000 (64M) */
dimmInfo->drb_size = (uchar) tmp;
DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
@@ -1328,7 +1327,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
DP (printf
("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
tmp_sdram_mode, tmp_dunit_control_low));
- } else { /* clk sync. bypassed */
+ } else { /* clk sync. bypassed */
tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */
tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */
@@ -1345,7 +1344,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
DP (printf
("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
tmp_sdram_mode, tmp_dunit_control_low));
- } else { /* Not sync. */
+ } else { /* Not sync. */
tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk */
tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */
@@ -1504,7 +1503,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
/* for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
{
- int l, l1;
+ int l, l1;
i = info->slot;
DP (printf
@@ -1518,31 +1517,31 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
GT_REG_WRITE (EXTENDED_DRAM_MODE, 0x0);
GT_REG_WRITE (SDRAM_OPERATION, 0x4);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
+ DP (printf
("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
}
GT_REG_WRITE (SDRAM_MODE, tmp | 0x80);
GT_REG_WRITE (SDRAM_OPERATION, 0x3);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
+ DP (printf
("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
}
l1 = 0;
for (l=0;l<200;l++)
- l1 += GTREGREAD (SDRAM_OPERATION);
+ l1 += GTREGREAD (SDRAM_OPERATION);
GT_REG_WRITE (SDRAM_MODE, tmp);
GT_REG_WRITE (SDRAM_OPERATION, 0x3);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
+ DP (printf
("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
}
/* switch back to normal operation mode */
GT_REG_WRITE (SDRAM_OPERATION, 0x5);
while (GTREGREAD (SDRAM_OPERATION) != 0) {
- DP (printf
+ DP (printf
("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
}
@@ -1677,16 +1676,16 @@ initdram(int board_type)
}
/* ***************************************************************************************
-! * SDRAM INIT *
-! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb *
-! * This procedure fits only the Atlantis *
-! * *
+! * SDRAM INIT *
+! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb *
+! * This procedure fits only the Atlantis *
+! * *
! *************************************************************************************** */
/* ***************************************************************************************
-! * DFCDL initialize MV643xx Design Considerations *
-! * *
+! * DFCDL initialize MV643xx Design Considerations *
+! * *
! *************************************************************************************** */
int set_dfcdlInit (void)
{
diff --git a/board/esd/cpci750/u-boot.lds b/board/esd/cpci750/u-boot.lds
index 25e16de..1a95755 100644
--- a/board/esd/cpci750/u-boot.lds
+++ b/board/esd/cpci750/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/cpciiser4/u-boot.lds b/board/esd/cpciiser4/u-boot.lds
index f5daaef..21547ac 100644
--- a/board/esd/cpciiser4/u-boot.lds
+++ b/board/esd/cpciiser4/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds
index 2b5e33d..67d72f7 100644
--- a/board/esd/dasa_sim/u-boot.lds
+++ b/board/esd/dasa_sim/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/dp405/u-boot.lds b/board/esd/dp405/u-boot.lds
index 196f88c..d70d379 100644
--- a/board/esd/dp405/u-boot.lds
+++ b/board/esd/dp405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/du405/u-boot.lds b/board/esd/du405/u-boot.lds
index 71ab63d..46ef7e7 100644
--- a/board/esd/du405/u-boot.lds
+++ b/board/esd/du405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/du440/u-boot.lds b/board/esd/du440/u-boot.lds
index da2a400..b20fb1c 100644
--- a/board/esd/du440/u-boot.lds
+++ b/board/esd/du440/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 67b5d54..279d921 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -471,7 +471,7 @@ int misc_init_r (void)
*/
*fpga_ctrl |= gd->board_type & 0x0003;
- /*
+ /*
* Setup and enable EEPROM write protection
*/
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
diff --git a/board/esd/hh405/u-boot.lds b/board/esd/hh405/u-boot.lds
index f5daaef..21547ac 100644
--- a/board/esd/hh405/u-boot.lds
+++ b/board/esd/hh405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/hub405/u-boot.lds b/board/esd/hub405/u-boot.lds
index 46e8f3e..f21c7aa 100644
--- a/board/esd/hub405/u-boot.lds
+++ b/board/esd/hub405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/ocrtc/u-boot.lds b/board/esd/ocrtc/u-boot.lds
index eca720c..5fb9699 100644
--- a/board/esd/ocrtc/u-boot.lds
+++ b/board/esd/ocrtc/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index 9a0bf1e..5c717e25 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -735,7 +735,7 @@ U_BOOT_CMD(
);
-#define SECTOR_SIZE 32 /* 32 byte cache line */
+#define SECTOR_SIZE 32 /* 32 byte cache line */
#define SECTOR_MASK 0x1F
void my_flush_dcache(ulong lcl_addr, ulong count)
diff --git a/board/esd/pci405/u-boot.lds b/board/esd/pci405/u-boot.lds
index f5daaef..21547ac 100644
--- a/board/esd/pci405/u-boot.lds
+++ b/board/esd/pci405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/pf5200/Makefile b/board/esd/pf5200/Makefile
index a47cd3d..2e54315 100644
--- a/board/esd/pf5200/Makefile
+++ b/board/esd/pf5200/Makefile
@@ -31,8 +31,8 @@ LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
# CPLD = ../common/xilinx_jtag/lenval.o \
-# ../common/xilinx_jtag/micro.o \
-# ../common/xilinx_jtag/ports.o
+# ../common/xilinx_jtag/micro.o \
+# ../common/xilinx_jtag/ports.o
# COBJS = $(BOARD).o flash.o $(CPLD)
COBJS = $(BOARD).o flash.o
diff --git a/board/esd/plu405/u-boot.lds b/board/esd/plu405/u-boot.lds
index 196f88c..d70d379 100644
--- a/board/esd/plu405/u-boot.lds
+++ b/board/esd/plu405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/pmc405/u-boot.lds b/board/esd/pmc405/u-boot.lds
index 5b9321e..81ee614 100644
--- a/board/esd/pmc405/u-boot.lds
+++ b/board/esd/pmc405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds
index 94dd754..ae2e18d 100644
--- a/board/esd/pmc440/u-boot-nand.lds
+++ b/board/esd/pmc440/u-boot-nand.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/pmc440/u-boot.lds b/board/esd/pmc440/u-boot.lds
index da2a400..b20fb1c 100644
--- a/board/esd/pmc440/u-boot.lds
+++ b/board/esd/pmc440/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/tasreg/u-boot.lds b/board/esd/tasreg/u-boot.lds
index d21ecd4..afdb720 100644
--- a/board/esd/tasreg/u-boot.lds
+++ b/board/esd/tasreg/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/voh405/u-boot.lds b/board/esd/voh405/u-boot.lds
index 196f88c..d70d379 100644
--- a/board/esd/voh405/u-boot.lds
+++ b/board/esd/voh405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/vom405/u-boot.lds b/board/esd/vom405/u-boot.lds
index f5daaef..21547ac 100644
--- a/board/esd/vom405/u-boot.lds
+++ b/board/esd/vom405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esd/wuh405/u-boot.lds b/board/esd/wuh405/u-boot.lds
index 1c5d891..644174a 100644
--- a/board/esd/wuh405/u-boot.lds
+++ b/board/esd/wuh405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/esteem192e/flash.c b/board/esteem192e/flash.c
index 5465dea..d5eb201 100644
--- a/board/esteem192e/flash.c
+++ b/board/esteem192e/flash.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <mpc8xx.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#ifdef CONFIG_FLASH_16BIT
#define FLASH_WORD_SIZE unsigned short
@@ -38,97 +38,101 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
* Functions
*/
-ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info);
+ulong flash_get_size (volatile FLASH_WORD_SIZE * addr, flash_info_t * info);
+
#ifndef CONFIG_FLASH_16BIT
-static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int write_word (flash_info_t * info, ulong dest, ulong data);
#else
-static int write_short (flash_info_t *info, ulong dest, ushort data);
+static int write_short (flash_info_t * info, ulong dest, ushort data);
#endif
/*int flash_write (uchar *, ulong, ulong); */
/*flash_info_t *addr2info (ulong); */
-static void flash_get_offsets (ulong base, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size_b0, size_b1;
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
- size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE0_PRELIM,
- &flash_info[0]);
+ size_b0 =
+ flash_get_size ((volatile FLASH_WORD_SIZE *)
+ FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size_b0, size_b0 << 20);
}
- size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE1_PRELIM,
- &flash_info[1]);
+ size_b1 =
+ flash_get_size ((volatile FLASH_WORD_SIZE *)
+ FLASH_BASE1_PRELIM, &flash_info[1]);
if (size_b1 > size_b0) {
printf ("## ERROR: "
"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,
- size_b0, size_b0<<20
- );
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
+ size_b1, size_b1 << 20, size_b0, size_b0 << 20);
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
return (0);
}
/* Remap FLASH according to real size */
memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
- memctl->memc_br0 = CFG_FLASH_BASE | 0x00000801; /* (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;*/
+ memctl->memc_br0 = CFG_FLASH_BASE | 0x00000801; /* (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; */
/* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)CFG_FLASH_BASE,
- &flash_info[0]);
+ size_b0 = flash_get_size ((volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE,
+ &flash_info[0]);
flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
+ (void) flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
#endif
if (size_b1) {
- memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
- memctl->memc_br1 = (CFG_FLASH_BASE | 0x00000801) + (size_b0 & BR_BA_MSK);
- /*((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
- BR_MS_GPCM | BR_V;*/
+ memctl->memc_or1 =
+ CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+ memctl->memc_br1 =
+ (CFG_FLASH_BASE | 0x00000801) + (size_b0 & BR_BA_MSK);
+ /*((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_MS_GPCM | BR_V; */
/* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)(CFG_FLASH_BASE + size_b0),
- &flash_info[1]);
+ size_b1 =
+ flash_get_size ((volatile FLASH_WORD_SIZE
+ *) (CFG_FLASH_BASE + size_b0),
+ &flash_info[1]);
flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
+ (void) flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len -
+ 1, &flash_info[1]);
#endif
} else {
- memctl->memc_br1 = 0; /* invalidate bank */
+ memctl->memc_br1 = 0; /* invalidate bank */
flash_info[1].flash_id = FLASH_UNKNOWN;
flash_info[1].sector_count = -1;
@@ -142,110 +146,112 @@ unsigned long flash_init (void)
/*-----------------------------------------------------------------------
*/
-static void flash_get_offsets (ulong base, flash_info_t *info)
+static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
/* set up sector start adress table */
if (info->flash_id & FLASH_BTYPE) {
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
#ifndef CONFIG_FLASH_16BIT
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00008000;
- info->start[3] = base + 0x0000C000;
- info->start[4] = base + 0x00010000;
- info->start[5] = base + 0x00014000;
- info->start[6] = base + 0x00018000;
- info->start[7] = base + 0x0001C000;
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x000E0000;
- }
- }
- else {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00008000;
+ info->start[3] = base + 0x0000C000;
+ info->start[4] = base + 0x00010000;
+ info->start[5] = base + 0x00014000;
+ info->start[6] = base + 0x00018000;
+ info->start[7] = base + 0x0001C000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00020000) - 0x000E0000;
+ }
+ } else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00020000) - 0x00060000;
+ }
}
- }
#else
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00002000;
- info->start[2] = base + 0x00004000;
- info->start[3] = base + 0x00006000;
- info->start[4] = base + 0x00008000;
- info->start[5] = base + 0x0000A000;
- info->start[6] = base + 0x0000C000;
- info->start[7] = base + 0x0000E000;
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00070000;
- }
- }
- else {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00002000;
+ info->start[2] = base + 0x00004000;
+ info->start[3] = base + 0x00006000;
+ info->start[4] = base + 0x00008000;
+ info->start[5] = base + 0x0000A000;
+ info->start[6] = base + 0x0000C000;
+ info->start[7] = base + 0x0000E000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00070000;
+ }
+ } else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
}
- }
#endif
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
#ifndef CONFIG_FLASH_16BIT
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- info->start[i--] = base + info->size - 0x00014000;
- info->start[i--] = base + info->size - 0x00018000;
- info->start[i--] = base + info->size - 0x0001C000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00014000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x0001C000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
- } else {
+ } else {
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
}
- }
#else
- info->start[i--] = base + info->size - 0x00002000;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000A000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x0000E000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000A000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x0000E000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
- } else {
+ } else {
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
}
- }
#endif
}
@@ -254,12 +260,12 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
/*-----------------------------------------------------------------------
*/
-void flash_print_info (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
{
int i;
uchar *boottype;
- uchar botboot[]=", bottom boot sect)\n";
- uchar topboot[]=", top boot sector)\n";
+ uchar botboot[] = ", bottom boot sect)\n";
+ uchar topboot[] = ", top boot sector)\n";
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
@@ -267,73 +273,100 @@ void flash_print_info (flash_info_t *info)
}
switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
+ case FLASH_MAN_AMD:
+ printf ("AMD ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf ("FUJITSU ");
+ break;
+ case FLASH_MAN_SST:
+ printf ("SST ");
+ break;
+ case FLASH_MAN_STM:
+ printf ("STM ");
+ break;
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
}
- if (info->flash_id & 0x0001 ) {
- boottype = botboot;
+ if (info->flash_id & 0x0001) {
+ boottype = botboot;
} else {
- boottype = topboot;
+ boottype = topboot;
}
switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit%s",boottype);
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit%s",boottype);
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit%s",boottype);
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit%s",boottype);
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit%s",boottype);
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit%s",boottype);
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit%s",boottype);
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit%s",boottype);
- break;
- case FLASH_INTEL800B: printf ("INTEL28F800B (8 Mbit%s",boottype);
- break;
- case FLASH_INTEL800T: printf ("INTEL28F800T (8 Mbit%s",boottype);
- break;
- case FLASH_INTEL160B: printf ("INTEL28F160B (16 Mbit%s",boottype);
- break;
- case FLASH_INTEL160T: printf ("INTEL28F160T (16 Mbit%s",boottype);
- break;
- case FLASH_INTEL320B: printf ("INTEL28F320B (32 Mbit%s",boottype);
- break;
- case FLASH_INTEL320T: printf ("INTEL28F320T (32 Mbit%s",boottype);
- break;
-
-#if 0 /* enable when devices are available */
-
- case FLASH_INTEL640B: printf ("INTEL28F640B (64 Mbit%s",boottype);
- break;
- case FLASH_INTEL640T: printf ("INTEL28F640T (64 Mbit%s",boottype);
- break;
+ case FLASH_AM400B:
+ printf ("AM29LV400B (4 Mbit%s", boottype);
+ break;
+ case FLASH_AM400T:
+ printf ("AM29LV400T (4 Mbit%s", boottype);
+ break;
+ case FLASH_AM800B:
+ printf ("AM29LV800B (8 Mbit%s", boottype);
+ break;
+ case FLASH_AM800T:
+ printf ("AM29LV800T (8 Mbit%s", boottype);
+ break;
+ case FLASH_AM160B:
+ printf ("AM29LV160B (16 Mbit%s", boottype);
+ break;
+ case FLASH_AM160T:
+ printf ("AM29LV160T (16 Mbit%s", boottype);
+ break;
+ case FLASH_AM320B:
+ printf ("AM29LV320B (32 Mbit%s", boottype);
+ break;
+ case FLASH_AM320T:
+ printf ("AM29LV320T (32 Mbit%s", boottype);
+ break;
+ case FLASH_INTEL800B:
+ printf ("INTEL28F800B (8 Mbit%s", boottype);
+ break;
+ case FLASH_INTEL800T:
+ printf ("INTEL28F800T (8 Mbit%s", boottype);
+ break;
+ case FLASH_INTEL160B:
+ printf ("INTEL28F160B (16 Mbit%s", boottype);
+ break;
+ case FLASH_INTEL160T:
+ printf ("INTEL28F160T (16 Mbit%s", boottype);
+ break;
+ case FLASH_INTEL320B:
+ printf ("INTEL28F320B (32 Mbit%s", boottype);
+ break;
+ case FLASH_INTEL320T:
+ printf ("INTEL28F320T (32 Mbit%s", boottype);
+ break;
+
+#if 0 /* enable when devices are available */
+
+ case FLASH_INTEL640B:
+ printf ("INTEL28F640B (64 Mbit%s", boottype);
+ break;
+ case FLASH_INTEL640T:
+ printf ("INTEL28F640T (64 Mbit%s", boottype);
+ break;
#endif
- default: printf ("Unknown Chip Type\n");
- break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
+ for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
+ info->start[i], info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
return;
@@ -349,10 +382,10 @@ void flash_print_info (flash_info_t *info)
/*
* The following code cannot be run from FLASH!
*/
-ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
+ulong flash_get_size (volatile FLASH_WORD_SIZE * addr, flash_info_t * info)
{
short i;
- ulong base = (ulong)addr;
+ ulong base = (ulong) addr;
FLASH_WORD_SIZE value;
/* Write auto select command: read Manufacturer ID */
@@ -367,7 +400,7 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
*/
addr[0x0000] = 0x00900090;
- if(addr[0x0000] != 0x00890089){
+ if (addr[0x0000] != 0x00890089) {
addr[0x0555] = 0x00AA00AA;
addr[0x02AA] = 0x00550055;
addr[0x0555] = 0x00900090;
@@ -381,7 +414,7 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
addr[0x0000] = 0x0090;
- if(addr[0x0000] != 0x0089){
+ if (addr[0x0000] != 0x0089) {
addr[0x0555] = 0x00AA;
addr[0x02AA] = 0x0055;
addr[0x0555] = 0x0090;
@@ -409,11 +442,11 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
- return (0); /* no or unknown flash */
+ return (0); /* no or unknown flash */
}
- value = addr[1]; /* device ID */
+ value = addr[1]; /* device ID */
switch (value) {
@@ -421,206 +454,208 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
info->size = 0x00100000;
- break; /* => 1 MB */
+ break; /* => 1 MB */
case (AMD_ID_LV400B & FLASH_ID_MASK):
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
info->size = 0x00100000;
- break; /* => 1 MB */
+ break; /* => 1 MB */
case (AMD_ID_LV800T & FLASH_ID_MASK):
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
info->size = 0x00200000;
- break; /* => 2 MB */
+ break; /* => 2 MB */
case (AMD_ID_LV800B & FLASH_ID_MASK):
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
info->size = 0x00200000;
- break; /* => 2 MB */
+ break; /* => 2 MB */
case (AMD_ID_LV160T & FLASH_ID_MASK):
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
info->size = 0x00400000;
- break; /* => 4 MB */
+ break; /* => 4 MB */
case (AMD_ID_LV160B & FLASH_ID_MASK):
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
case (AMD_ID_LV320T & FLASH_ID_MASK):
info->flash_id += FLASH_AM320T;
info->sector_count = 67;
info->size = 0x00800000;
- break; /* => 8 MB */
+ break; /* => 8 MB */
case (AMD_ID_LV320B & FLASH_ID_MASK):
info->flash_id += FLASH_AM320B;
info->sector_count = 67;
info->size = 0x00800000;
- break; /* => 8 MB */
+ break; /* => 8 MB */
#endif
case (INTEL_ID_28F800B3T & FLASH_ID_MASK):
info->flash_id += FLASH_INTEL800T;
info->sector_count = 23;
info->size = 0x00200000;
- break; /* => 2 MB */
+ break; /* => 2 MB */
case (INTEL_ID_28F800B3B & FLASH_ID_MASK):
info->flash_id += FLASH_INTEL800B;
info->sector_count = 23;
info->size = 0x00200000;
- break; /* => 2 MB */
+ break; /* => 2 MB */
case (INTEL_ID_28F160B3T & FLASH_ID_MASK):
info->flash_id += FLASH_INTEL160T;
info->sector_count = 39;
info->size = 0x00400000;
- break; /* => 4 MB */
+ break; /* => 4 MB */
case (INTEL_ID_28F160B3B & FLASH_ID_MASK):
info->flash_id += FLASH_INTEL160B;
info->sector_count = 39;
info->size = 0x00400000;
- break; /* => 4 MB */
+ break; /* => 4 MB */
case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
info->flash_id += FLASH_INTEL320T;
info->sector_count = 71;
info->size = 0x00800000;
- break; /* => 8 MB */
+ break; /* => 8 MB */
case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
info->flash_id += FLASH_AM320B;
info->sector_count = 71;
info->size = 0x00800000;
- break; /* => 8 MB */
+ break; /* => 8 MB */
-#if 0 /* enable when devices are available */
+#if 0 /* enable when devices are available */
case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
info->flash_id += FLASH_INTEL320T;
info->sector_count = 135;
info->size = 0x01000000;
- break; /* => 16 MB */
+ break; /* => 16 MB */
case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
info->flash_id += FLASH_AM320B;
info->sector_count = 135;
info->size = 0x01000000;
- break; /* => 16 MB */
+ break; /* => 16 MB */
#endif
default:
info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
+ return (0); /* => no or unknown flash */
}
/* set up sector start adress table */
if (info->flash_id & FLASH_BTYPE) {
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
#ifndef CONFIG_FLASH_16BIT
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00008000;
- info->start[3] = base + 0x0000C000;
- info->start[4] = base + 0x00010000;
- info->start[5] = base + 0x00014000;
- info->start[6] = base + 0x00018000;
- info->start[7] = base + 0x0001C000;
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x000E0000;
- }
- }
- else {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00008000;
+ info->start[3] = base + 0x0000C000;
+ info->start[4] = base + 0x00010000;
+ info->start[5] = base + 0x00014000;
+ info->start[6] = base + 0x00018000;
+ info->start[7] = base + 0x0001C000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00020000) - 0x000E0000;
+ }
+ } else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00020000) - 0x00060000;
+ }
}
- }
#else
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00002000;
- info->start[2] = base + 0x00004000;
- info->start[3] = base + 0x00006000;
- info->start[4] = base + 0x00008000;
- info->start[5] = base + 0x0000A000;
- info->start[6] = base + 0x0000C000;
- info->start[7] = base + 0x0000E000;
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00070000;
- }
- }
- else {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00002000;
+ info->start[2] = base + 0x00004000;
+ info->start[3] = base + 0x00006000;
+ info->start[4] = base + 0x00008000;
+ info->start[5] = base + 0x0000A000;
+ info->start[6] = base + 0x0000C000;
+ info->start[7] = base + 0x0000E000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00070000;
+ }
+ } else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
}
- }
#endif
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
#ifndef CONFIG_FLASH_16BIT
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- info->start[i--] = base + info->size - 0x00014000;
- info->start[i--] = base + info->size - 0x00018000;
- info->start[i--] = base + info->size - 0x0001C000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00014000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x0001C000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
- } else {
+ } else {
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
}
- }
#else
- info->start[i--] = base + info->size - 0x00002000;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000A000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x0000E000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000A000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x0000E000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
- } else {
+ } else {
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
}
- }
#endif
}
@@ -628,7 +663,7 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ addr = (volatile FLASH_WORD_SIZE *) (info->start[i]);
info->protect[i] = addr[2] & 1;
}
@@ -636,11 +671,11 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
* Prevent writes to uninitialized FLASH.
*/
if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- if( (info->flash_id & 0xFF00) == FLASH_MAN_INTEL){
- *addr = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+ addr = (volatile FLASH_WORD_SIZE *) info->start[0];
+ if ((info->flash_id & 0xFF00) == FLASH_MAN_INTEL) {
+ *addr = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
} else {
- *addr = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+ *addr = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
}
}
@@ -651,10 +686,11 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
- volatile FLASH_WORD_SIZE *addr=(volatile FLASH_WORD_SIZE*)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr =
+ (volatile FLASH_WORD_SIZE *) (info->start[0]);
int flag, prot, sect, l_sect, barf;
ulong start, now, last;
int rcode = 0;
@@ -670,21 +706,20 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
if ((info->flash_id == FLASH_UNKNOWN) ||
((info->flash_id > FLASH_AMD_COMP) &&
- ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
+ ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL))) {
printf ("Can't erase unknown flash type - aborted\n");
return 1;
}
prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
+ for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
@@ -692,109 +727,111 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
l_sect = -1;
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
- if(info->flash_id < FLASH_AMD_COMP) {
+ flag = disable_interrupts ();
+ if (info->flash_id < FLASH_AMD_COMP) {
#ifndef CONFIG_FLASH_16BIT
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
#else
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
- addr[0x0555] = 0x0080;
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x0080;
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
#endif
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
- addr[0] = (0x00300030 & FLASH_ID_MASK);
- l_sect = sect;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (volatile FLASH_WORD_SIZE *) (info->start[sect]);
+ addr[0] = (0x00300030 & FLASH_ID_MASK);
+ l_sect = sect;
+ }
}
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- start = get_timer (0);
- last = start;
- addr = (volatile FLASH_WORD_SIZE*)(info->start[l_sect]);
- while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
- (0x00800080&FLASH_ID_MASK) )
- {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (volatile FLASH_WORD_SIZE *) (info->start[l_sect]);
+ while ((addr[0] & (0x00800080 & FLASH_ID_MASK)) !=
+ (0x00800080 & FLASH_ID_MASK)) {
+ if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
}
- }
-DONE:
- /* reset to read mode */
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
- } else {
+ DONE:
+ /* reset to read mode */
+ addr = (volatile FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+ } else {
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- barf = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ barf = 0;
#ifndef CONFIG_FLASH_16BIT
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00200020;
- addr[0] = 0x00D000D0;
- while(!(addr[0] & 0x00800080)); /* wait for error or finish */
- if( addr[0] & 0x003A003A) { /* check for error */
- barf = addr[0] & 0x003A0000;
- if( barf ) {
- barf >>=16;
- } else {
- barf = addr[0] & 0x0000003A;
+ addr = (vu_long *) (info->start[sect]);
+ addr[0] = 0x00200020;
+ addr[0] = 0x00D000D0;
+ while (!(addr[0] & 0x00800080)); /* wait for error or finish */
+ if (addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if (barf) {
+ barf >>= 16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
}
- }
#else
- addr = (vu_short*)(info->start[sect]);
- addr[0] = 0x0020;
- addr[0] = 0x00D0;
- while(!(addr[0] & 0x0080)); /* wait for error or finish */
- if( addr[0] & 0x003A) /* check for error */
- barf = addr[0] & 0x003A;
+ addr = (vu_short *) (info->start[sect]);
+ addr[0] = 0x0020;
+ addr[0] = 0x00D0;
+ while (!(addr[0] & 0x0080)); /* wait for error or finish */
+ if (addr[0] & 0x003A) /* check for error */
+ barf = addr[0] & 0x003A;
#endif
- if(barf) {
- printf("\nFlash error in sector at %lx\n",(unsigned long)addr);
- if(barf & 0x0002) printf("Block locked, not erased.\n");
- if((barf & 0x0030) == 0x0030)
- printf("Command Sequence error.\n");
- if((barf & 0x0030) == 0x0020)
- printf("Block Erase error.\n");
- if(barf & 0x0008) printf("Vpp Low error.\n");
- rcode = 1;
- } else printf(".");
- l_sect = sect;
+ if (barf) {
+ printf ("\nFlash error in sector at %lx\n", (unsigned long) addr);
+ if (barf & 0x0002)
+ printf ("Block locked, not erased.\n");
+ if ((barf & 0x0030) == 0x0030)
+ printf ("Command Sequence error.\n");
+ if ((barf & 0x0030) == 0x0020)
+ printf ("Block Erase error.\n");
+ if (barf & 0x0008)
+ printf ("Vpp Low error.\n");
+ rcode = 1;
+ } else
+ printf (".");
+ l_sect = sect;
+ }
+ addr = (volatile FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+
}
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
}
-
- }
printf (" done\n");
return rcode;
}
@@ -809,7 +846,7 @@ DONE:
* 2 - Flash not erased
*/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
#ifndef CONFIG_FLASH_16BIT
ulong cp, wp, data;
@@ -830,19 +867,19 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
*/
if ((l = addr - wp) != 0) {
data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- for (; i<4 && cnt>0; ++i) {
+ for (; i < 4 && cnt > 0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- if ((rc = write_word(info, wp, data)) != 0) {
+ if ((rc = write_word (info, wp, data)) != 0) {
return (rc);
}
wp += 4;
@@ -853,13 +890,13 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
*/
while (cnt >= 4) {
data = 0;
- for (i=0; i<4; ++i) {
+ for (i = 0; i < 4; ++i) {
data = (data << 8) | *src++;
}
- if ((rc = write_word(info, wp, data)) != 0) {
+ if ((rc = write_word (info, wp, data)) != 0) {
return (rc);
}
- wp += 4;
+ wp += 4;
cnt -= 4;
}
@@ -871,15 +908,15 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
* handle unaligned tail bytes
*/
data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ for (; i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- return (write_word(info, wp, data));
+ return (write_word (info, wp, data));
#else
wp = (addr & ~1); /* get lower word aligned address */
@@ -891,7 +928,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
data = 0;
data = (data << 8) | *src++;
--cnt;
- if ((rc = write_short(info, wp, data)) != 0) {
+ if ((rc = write_short (info, wp, data)) != 0) {
return (rc);
}
wp += 2;
@@ -903,7 +940,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
/* l = 0; used for debuging */
while (cnt >= 2) {
data = 0;
- for (i=0; i<2; ++i) {
+ for (i = 0; i < 2; ++i) {
data = (data << 8) | *src++;
}
@@ -912,10 +949,10 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
l = 1;
} used for debuging */
- if ((rc = write_short(info, wp, data)) != 0) {
+ if ((rc = write_short (info, wp, data)) != 0) {
return (rc);
}
- wp += 2;
+ wp += 2;
cnt -= 2;
}
@@ -927,15 +964,15 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
* handle unaligned tail bytes
*/
data = 0;
- for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
- for (; i<2; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ for (; i < 2; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- return (write_short(info, wp, data));
+ return (write_short (info, wp, data));
#endif
@@ -948,148 +985,151 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
* 2 - Flash not erased
*/
#ifndef CONFIG_FLASH_16BIT
-static int write_word (flash_info_t *info, ulong dest, ulong data)
+static int write_word (flash_info_t * info, ulong dest, ulong data)
{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start,barf;
+ vu_long *addr = (vu_long *) (info->start[0]);
+ ulong start, barf;
int flag;
/* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
+ if ((*((vu_long *) dest) & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- if(info->flash_id > FLASH_AMD_COMP) {
- /* AMD stuff */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
- } else {
- /* intel stuff */
- *addr = 0x00400040;
- }
- *((vu_long *)dest) = data;
+ flag = disable_interrupts ();
+
+ if (info->flash_id > FLASH_AMD_COMP) {
+ /* AMD stuff */
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+ } else {
+ /* intel stuff */
+ *addr = 0x00400040;
+ }
+ *((vu_long *) dest) = data;
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts ();
/* data polling for D7 */
start = get_timer (0);
- if(info->flash_id > FLASH_AMD_COMP) {
+ if (info->flash_id > FLASH_AMD_COMP) {
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
+ while ((*((vu_long *) dest) & 0x00800080) !=
+ (data & 0x00800080)) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
}
- }
- } else {
+ } else {
- while(!(addr[0] & 0x00800080)){ /* wait for error or finish */
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
+ while (!(addr[0] & 0x00800080)) { /* wait for error or finish */
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
- if( addr[0] & 0x003A003A) { /* check for error */
- barf = addr[0] & 0x003A0000;
- if( barf ) {
- barf >>=16;
- } else {
- barf = addr[0] & 0x0000003A;
- }
- printf("\nFlash write error at address %lx\n",(unsigned long)dest);
- if(barf & 0x0002) printf("Block locked, not erased.\n");
- if(barf & 0x0010) printf("Programming error.\n");
- if(barf & 0x0008) printf("Vpp Low error.\n");
- return(2);
- }
+ if (addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if (barf) {
+ barf >>= 16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
+ printf ("\nFlash write error at address %lx\n", (unsigned long) dest);
+ if (barf & 0x0002)
+ printf ("Block locked, not erased.\n");
+ if (barf & 0x0010)
+ printf ("Programming error.\n");
+ if (barf & 0x0008)
+ printf ("Vpp Low error.\n");
+ return (2);
+ }
- }
+ }
- return (0);
+ return (0);
-}
+ }
#else
-static int write_short (flash_info_t *info, ulong dest, ushort data)
+static int write_short (flash_info_t * info, ulong dest, ushort data)
{
- vu_short *addr = (vu_short*)(info->start[0]);
- ulong start,barf;
+ vu_short *addr = (vu_short *) (info->start[0]);
+ ulong start, barf;
int flag;
/* Check if Flash is (sufficiently) erased */
- if ((*((vu_short *)dest) & data) != data) {
+ if ((*((vu_short *) dest) & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- if(info->flash_id < FLASH_AMD_COMP) {
- /* AMD stuff */
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
- addr[0x0555] = 0x00A0;
- } else {
- /* intel stuff */
- *addr = 0x00D0;
- *addr = 0x0040;
- }
- *((vu_short *)dest) = data;
+ flag = disable_interrupts ();
+
+ if (info->flash_id < FLASH_AMD_COMP) {
+ /* AMD stuff */
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x00A0;
+ } else {
+ /* intel stuff */
+ *addr = 0x00D0;
+ *addr = 0x0040;
+ }
+ *((vu_short *) dest) = data;
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts ();
/* data polling for D7 */
start = get_timer (0);
- if(info->flash_id < FLASH_AMD_COMP) {
- /* AMD stuff */
- while ((*((vu_short *)dest) & 0x0080) != (data & 0x0080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
+ if (info->flash_id < FLASH_AMD_COMP) {
+ /* AMD stuff */
+ while ((*((vu_short *) dest) & 0x0080) != (data & 0x0080)) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
}
- }
- } else {
- /* intel stuff */
- while(!(addr[0] & 0x0080)){ /* wait for error or finish */
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
- }
+ } else {
+ /* intel stuff */
+ while (!(addr[0] & 0x0080)) { /* wait for error or finish */
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+ return (1);
+ }
- if( addr[0] & 0x003A) { /* check for error */
- barf = addr[0] & 0x003A;
- printf("\nFlash write error at address %lx\n",(unsigned long)dest);
- if(barf & 0x0002) printf("Block locked, not erased.\n");
- if(barf & 0x0010) printf("Programming error.\n");
- if(barf & 0x0008) printf("Vpp Low error.\n");
- return(2);
- }
- *addr = 0x00B0;
- *addr = 0x0070;
- while(!(addr[0] & 0x0080)){ /* wait for error or finish */
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+ if (addr[0] & 0x003A) { /* check for error */
+ barf = addr[0] & 0x003A;
+ printf ("\nFlash write error at address %lx\n",
+ (unsigned long) dest);
+ if (barf & 0x0002)
+ printf ("Block locked, not erased.\n");
+ if (barf & 0x0010)
+ printf ("Programming error.\n");
+ if (barf & 0x0008)
+ printf ("Vpp Low error.\n");
+ return (2);
+ }
+ *addr = 0x00B0;
+ *addr = 0x0070;
+ while (!(addr[0] & 0x0080)) { /* wait for error or finish */
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+ return (1);
+ }
+ *addr = 0x00FF;
}
-
- *addr = 0x00FF;
-
- }
-
return (0);
-
}
-
#endif
-
-/*-----------------------------------------------------------------------
- */
+/*-----------------------------------------------------------------------*/
diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds
index 2a8d9e2..acaf4e3 100644
--- a/board/esteem192e/u-boot.lds
+++ b/board/esteem192e/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c
index 08ed635..67375e9 100644
--- a/board/etin/debris/debris.c
+++ b/board/etin/debris/debris.c
@@ -43,7 +43,7 @@ int checkboard (void)
return 0;
}
-#if 0 /* NOT USED */
+#if 0 /* NOT USED */
int checkflash (void)
{
/* TODO: XXX XXX XXX */
diff --git a/board/etin/debris/speed.h b/board/etin/debris/speed.h
index b66393b..3f32a14 100644
--- a/board/etin/debris/speed.h
+++ b/board/etin/debris/speed.h
@@ -28,10 +28,10 @@
* SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
*
* SPEED_FCOUNT2 timer 2 counting frequency
- * GCLK CPU clock
+ * GCLK CPU clock
* SPEED_TMR2_PS prescaler
*/
-#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
/*-----------------------------------------------------------------------
* Timer value for PIT
diff --git a/board/etx094/u-boot.lds b/board/etx094/u-boot.lds
index 0e7bd37..5313bd4 100644
--- a/board/etx094/u-boot.lds
+++ b/board/etx094/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/etx094/u-boot.lds.debug b/board/etx094/u-boot.lds.debug
index a0121ce..06115ea 100644
--- a/board/etx094/u-boot.lds.debug
+++ b/board/etx094/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/evb64260/bootseq.txt b/board/evb64260/bootseq.txt
index 391d49a..290aed9 100644
--- a/board/evb64260/bootseq.txt
+++ b/board/evb64260/bootseq.txt
@@ -56,7 +56,7 @@ in_flash:
setup stack pointer (r1)
setup GOT
call cpu_init_f
- debug leds
+ debug leds
board_init_f: (common/board.c)
board_early_init_f:
remap gt regs?
@@ -74,7 +74,7 @@ in_flash:
dram_size()
setup PCI slave memory mappings
setup SCS
- setup monitor
+ setup monitor
alloc board info struct
init bd struct
relocate_code: (cpu/mpc7xxx/start.S)
diff --git a/board/evb64260/eth.c b/board/evb64260/eth.c
index add2b3d..618af6f 100644
--- a/board/evb64260/eth.c
+++ b/board/evb64260/eth.c
@@ -529,7 +529,7 @@ gt6426x_eth_probe(void *v, bd_t *bis)
#endif
/* 31 28 27 24 23 20 19 16
- * 0000 0000 0000 0000 [0004]
+ * 0000 0000 0000 0000 [0004]
* 15 12 11 8 7 4 3 0
* 1000 1101 0000 0000 [4d00]
* 20 - 0=MII 1=RMII
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
index 98ac7f6..9e8bfe0 100644
--- a/board/evb64260/mpsc.c
+++ b/board/evb64260/mpsc.c
@@ -309,9 +309,9 @@ mpsc_init(int baud)
/* COMM_MPSC CONFIG */
#ifdef SOFTWARE_CACHE_MANAGEMENT
- galmpsc_set_snoop(CHANNEL, 0); /* disable snoop */
+ galmpsc_set_snoop(CHANNEL, 0); /* disable snoop */
#else
- galmpsc_set_snoop(CHANNEL, 1); /* enable snoop */
+ galmpsc_set_snoop(CHANNEL, 1); /* enable snoop */
#endif
return 0;
diff --git a/board/evb64260/mpsc.h b/board/evb64260/mpsc.h
index 54b642a..c71258c 100644
--- a/board/evb64260/mpsc.h
+++ b/board/evb64260/mpsc.h
@@ -55,9 +55,9 @@ extern int (*mpsc_putchar)(char ch);
#define TX_STOP 0x00010000
#define RX_ENABLE 0x00000080
-#define SDMA_RX_ABORT (1 << 15)
-#define SDMA_TX_ABORT (1 << 31)
-#define MPSC_TX_ABORT (1 << 7)
+#define SDMA_RX_ABORT (1 << 15)
+#define SDMA_TX_ABORT (1 << 31)
+#define MPSC_TX_ABORT (1 << 7)
#define MPSC_RX_ABORT (1 << 23)
#define MPSC_ENTER_HUNT (1 << 31)
diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds
index 25e16de..1a95755 100644
--- a/board/evb64260/u-boot.lds
+++ b/board/evb64260/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/evb64260/zuma_pbb_mbox.c b/board/evb64260/zuma_pbb_mbox.c
index 2b9a469..6f5df6e 100644
--- a/board/evb64260/zuma_pbb_mbox.c
+++ b/board/evb64260/zuma_pbb_mbox.c
@@ -148,7 +148,7 @@ zuma_mbox_setenv(void)
}
/**
- * zuma_mbox_init:
+ * zuma_mbox_init:
*/
int zuma_mbox_init(void)
diff --git a/board/exbitgen/exbitgen.h b/board/exbitgen/exbitgen.h
index 058ad48..dceaf6d 100644
--- a/board/exbitgen/exbitgen.h
+++ b/board/exbitgen/exbitgen.h
@@ -25,15 +25,15 @@
#define CPLD_BASE 0x10000000 /* t.b.m. */
-#define DEBUG_LEDS_ADDR CPLD_BASE + 0x01
-#define HW_ID_ADDR CPLD_BASE + 0x02
-#define DIP_SWITCH_ADDR CPLD_BASE + 0x04
-#define PHY_CTRL_ADDR CPLD_BASE + 0x05
-#define SPI_OUT_ADDR CPLD_BASE + 0x07
-#define SPI_IN_ADDR CPLD_BASE + 0x08
-#define MDIO_OUT_ADDR CPLD_BASE + 0x09
-#define MDIO_IN_ADDR CPLD_BASE + 0x0A
-#define MISC_OUT_ADDR CPLD_BASE + 0x0B
+#define DEBUG_LEDS_ADDR CPLD_BASE + 0x01
+#define HW_ID_ADDR CPLD_BASE + 0x02
+#define DIP_SWITCH_ADDR CPLD_BASE + 0x04
+#define PHY_CTRL_ADDR CPLD_BASE + 0x05
+#define SPI_OUT_ADDR CPLD_BASE + 0x07
+#define SPI_IN_ADDR CPLD_BASE + 0x08
+#define MDIO_OUT_ADDR CPLD_BASE + 0x09
+#define MDIO_IN_ADDR CPLD_BASE + 0x0A
+#define MISC_OUT_ADDR CPLD_BASE + 0x0B
/* Addresses used on I2C bus */
#define LM75_CHIP_ADDR 0x9C
diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S
index 0e6cd04..71aefb9 100644
--- a/board/exbitgen/init.S
+++ b/board/exbitgen/init.S
@@ -184,11 +184,11 @@ ext_bus_cntlr_init:
ori r3, r3, HW_ID_ADDR@l
lbz r3,0x0000(r3)
cmpi 0, r3, 1 /* if (HW_ID==1) */
- beq setup_h2evalboard /* then jump */
+ beq setup_h2evalboard /* then jump */
cmpi 0, r3, 2 /* if (HW_ID==2) */
- beq setup_genieboard /* then jump */
+ beq setup_genieboard /* then jump */
cmpi 0, r3, 3 /* if (HW_ID==3) */
- beq setup_genieboard /* then jump */
+ beq setup_genieboard /* then jump */
setup_genieboard:
/*--------------------------------------------------------------- */
diff --git a/board/exbitgen/u-boot.lds b/board/exbitgen/u-boot.lds
index 99068e7..e4faa44 100644
--- a/board/exbitgen/u-boot.lds
+++ b/board/exbitgen/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/fads/fads.h b/board/fads/fads.h
index ffa72cb..0a8b983 100644
--- a/board/fads/fads.h
+++ b/board/fads/fads.h
@@ -143,7 +143,7 @@
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x00100000
+#define CFG_LOAD_ADDR 0x00100000
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
@@ -176,7 +176,7 @@
*/
#define CFG_SDRAM_BASE 0x00000000
#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */
-#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */
+#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */
/*
* 2048 SDRAM rows
* 1000 factor s -> ms
@@ -195,7 +195,7 @@
#if (CFG_SDRAM_SIZE)
#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
#else
-#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
+#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
#endif /* CFG_SDRAM_SIZE */
/*
diff --git a/board/fads/pcmcia.c b/board/fads/pcmcia.c
index 57a2454..99fe0b4 100644
--- a/board/fads/pcmcia.c
+++ b/board/fads/pcmcia.c
@@ -62,7 +62,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
*((uint *)BCSR1) |= reg;
#endif
- *((uint *)BCSR1) |= reg << 20;
+ *((uint *)BCSR1) |= reg << 20;
return 0;
}
diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds
index 51db490..c7571e4 100644
--- a/board/fads/u-boot.lds
+++ b/board/fads/u-boot.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/fads/u-boot.lds.debug b/board/fads/u-boot.lds.debug
index 96c4e22..fd2245f 100644
--- a/board/fads/u-boot.lds.debug
+++ b/board/fads/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds
index ca8ffb0..f098412 100644
--- a/board/flagadm/u-boot.lds
+++ b/board/flagadm/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug
index 1a25a98..85072fe 100644
--- a/board/flagadm/u-boot.lds.debug
+++ b/board/flagadm/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c
index 2336f6b..6189ec9 100644
--- a/board/freescale/common/fsl_diu_fb.c
+++ b/board/freescale/common/fsl_diu_fb.c
@@ -160,7 +160,7 @@ struct diu_hw {
struct diu_addr {
unsigned char * paddr; /* Virtual address */
- unsigned int offset;
+ unsigned int offset;
};
#define FSL_DIU_BASE_OFFSET 0x2C000 /* Offset of Display Interface Unit */
@@ -286,7 +286,7 @@ int fsl_diu_init(int xres,
ad->src_size_g_alpha
= cpu_to_le32((var->yres << 12) | var->xres);
/* fix me. AOI should not be greater than display size */
- ad->aoi_size = cpu_to_le32(( var->yres << 16) | var->xres);
+ ad->aoi_size = cpu_to_le32(( var->yres << 16) | var->xres);
ad->offset_xyi = 0;
ad->offset_xyd = 0;
@@ -325,7 +325,7 @@ int fsl_diu_init(int xres,
hw->gamma = (unsigned int) gamma.paddr;
hw->cursor= (unsigned int) cursor.paddr;
hw->bgnd = 0x007F7F7F; /* BGND */
- hw->bgnd_wb = 0; /* BGND_WB */
+ hw->bgnd_wb = 0; /* BGND_WB */
hw->disp_size = var->yres << 16 | var->xres; /* DISP SIZE */
hw->wb_size = 0; /* WB SIZE */
hw->wb_mem_addr = 0; /* WB MEM ADDR */
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index bff6a82..64e2e08 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -397,7 +397,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
* Check that cf has all required parms
*/
if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
- || unknown_param) {
+ || unknown_param) {
puts(cmdtp->help);
return 1;
}
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index c8e17d0..8b13d06 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -32,15 +32,15 @@ typedef struct {
u8 sn[12]; /* 0x0004 - 0x000F Serial Number */
u8 errata[5]; /* 0x0010 - 0x0014 Errata Level */
u8 date[6]; /* 0x0015 - 0x001a Build Date */
- u8 res_0; /* 0x001b Reserved */
+ u8 res_0; /* 0x001b Reserved */
u8 version[4]; /* 0x001c - 0x001f Version */
u8 tempcal[8]; /* 0x0020 - 0x0027 Temperature Calibration Factors*/
- u8 tempcalsys[2]; /* 0x0028 - 0x0029 System Temperature Calibration Factors*/
+ u8 tempcalsys[2]; /* 0x0028 - 0x0029 System Temperature Calibration Factors*/
u8 res_1[22]; /* 0x0020 - 0x003f Reserved */
- u8 mac_size; /* 0x0040 Mac table size */
- u8 mac_flag; /* 0x0041 Mac table flags */
+ u8 mac_size; /* 0x0040 Mac table size */
+ u8 mac_flag; /* 0x0041 Mac table flags */
u8 mac[8][6]; /* 0x0042 - 0x0071 Mac addresses */
- u32 crc; /* 0x0072 crc32 checksum */
+ u32 crc; /* 0x0072 crc32 checksum */
} EEPROM_data;
static EEPROM_data mac_data;
diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds
index 9fda0ca..098e9d3 100644
--- a/board/freescale/m52277evb/u-boot.lds
+++ b/board/freescale/m52277evb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m5235evb/u-boot.16 b/board/freescale/m5235evb/u-boot.16
index c8c215c..4ca026f 100644
--- a/board/freescale/m5235evb/u-boot.16
+++ b/board/freescale/m5235evb/u-boot.16
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m5235evb/u-boot.32 b/board/freescale/m5235evb/u-boot.32
index 95b10c7..eeffdfb 100644
--- a/board/freescale/m5235evb/u-boot.32
+++ b/board/freescale/m5235evb/u-boot.32
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds
index ba07426..33133a0f 100644
--- a/board/freescale/m5235evb/u-boot.lds
+++ b/board/freescale/m5235evb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds
index d21ecd4..afdb720 100644
--- a/board/freescale/m5249evb/u-boot.lds
+++ b/board/freescale/m5249evb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds
index 089dc10..6d225f5 100644
--- a/board/freescale/m5253evbe/u-boot.lds
+++ b/board/freescale/m5253evbe/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds
index 51c008f..d810ebc 100644
--- a/board/freescale/m5275evb/u-boot.lds
+++ b/board/freescale/m5275evb/u-boot.lds
@@ -49,7 +49,7 @@ SECTIONS
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
- .plt : { *(.plt) }
+ .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds
index cf9730d..1ddfbc4 100644
--- a/board/freescale/m5329evb/u-boot.lds
+++ b/board/freescale/m5329evb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds
index 47e1f67..d30a401 100644
--- a/board/freescale/m5373evb/u-boot.lds
+++ b/board/freescale/m5373evb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m54455evb/u-boot.atm b/board/freescale/m54455evb/u-boot.atm
index 6562fd1..22c6048 100644
--- a/board/freescale/m54455evb/u-boot.atm
+++ b/board/freescale/m54455evb/u-boot.atm
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m54455evb/u-boot.int b/board/freescale/m54455evb/u-boot.int
index 70cb7e2..4d504a2 100644
--- a/board/freescale/m54455evb/u-boot.int
+++ b/board/freescale/m54455evb/u-boot.int
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds
index c0ca451..1aa53c2 100644
--- a/board/freescale/m54455evb/u-boot.lds
+++ b/board/freescale/m54455evb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds
index f87e4be..cc7f3eb 100644
--- a/board/freescale/m547xevb/u-boot.lds
+++ b/board/freescale/m547xevb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds
index f87e4be..cc7f3eb 100644
--- a/board/freescale/m548xevb/u-boot.lds
+++ b/board/freescale/m548xevb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc7448hpc2/asm_init.S b/board/freescale/mpc7448hpc2/asm_init.S
index a7a40a1..521301f 100644
--- a/board/freescale/mpc7448hpc2/asm_init.S
+++ b/board/freescale/mpc7448hpc2/asm_init.S
@@ -415,7 +415,7 @@ set_default_values:
#ifdef SDC_AUTOPRECH_EN
oris r5,r5,0x0001 /* set auto precharge EN bit */
#endif
- stw r5,SD_D0_CTRL(r4)
+ stw r5,SD_D0_CTRL(r4)
LOAD_U32(r5,VAL_SD_D0_BAR)
stw r5,SD_D0_BAR(r4)
sync
diff --git a/board/freescale/mpc7448hpc2/tsi108_init.c b/board/freescale/mpc7448hpc2/tsi108_init.c
index 30ae17d..efa952c 100644
--- a/board/freescale/mpc7448hpc2/tsi108_init.c
+++ b/board/freescale/mpc7448hpc2/tsi108_init.c
@@ -616,7 +616,7 @@ int misc_init_r (void)
0x802e0044); /* D=0.25% */
out32 (CFG_TSI108_CSR_BASE +
TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
- 0x80000000 | pll0_config[i].ctrl0);
+ 0x80000000 | pll0_config[i].ctrl0);
#endif /* CFG_CLK_SPREAD */
#ifdef CFG_L2
diff --git a/board/freescale/mpc7448hpc2/u-boot.lds b/board/freescale/mpc7448hpc2/u-boot.lds
index 77dfad6..6b228f7 100644
--- a/board/freescale/mpc7448hpc2/u-boot.lds
+++ b/board/freescale/mpc7448hpc2/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc8260ads/mpc8260ads.c b/board/freescale/mpc8260ads/mpc8260ads.c
index 93550e2..548d813 100644
--- a/board/freescale/mpc8260ads/mpc8260ads.c
+++ b/board/freescale/mpc8260ads/mpc8260ads.c
@@ -340,7 +340,7 @@ long int initdram (int board_type)
#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */
memctl->memc_or3 = 0xFF803280;
memctl->memc_br3 = CFG_LSDRAM_BASE | 0x00001861;
-#else /* CS4 */
+#else /* CS4 */
memctl->memc_or4 = 0xFFC01480;
memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861;
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c
index 564e436..ecc67b6 100644
--- a/board/freescale/mpc8349emds/pci.c
+++ b/board/freescale/mpc8349emds/pci.c
@@ -43,7 +43,7 @@ DECLARE_GLOBAL_DATA_PTR;
static struct pci_config_table pci_mpc8349emds_config_table[] = {
{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+ pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
}
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index 704f963..0317bfe 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -273,13 +273,13 @@ int misc_init_r(void)
static u8 eeprom_data[] = /* HRCW data */
{
0xAA, 0x55, 0xAA, /* Preamble */
- 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */
- 0x02, 0x40, /* RCWL ADDR=0x0_0900 */
+ 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */
+ 0x02, 0x40, /* RCWL ADDR=0x0_0900 */
(CFG_HRCW_LOW >> 24) & 0xFF,
(CFG_HRCW_LOW >> 16) & 0xFF,
(CFG_HRCW_LOW >> 8) & 0xFF,
CFG_HRCW_LOW & 0xFF,
- 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */
+ 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */
0x02, 0x41, /* RCWH ADDR=0x0_0904 */
(CFG_HRCW_HIGH >> 24) & 0xFF,
(CFG_HRCW_HIGH >> 16) & 0xFF,
diff --git a/board/freescale/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds
index 075d8f3..f200810 100644
--- a/board/freescale/mpc8540ads/u-boot.lds
+++ b/board/freescale/mpc8540ads/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc8541cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds
index d0ba43c..5f4dcf0 100644
--- a/board/freescale/mpc8541cds/u-boot.lds
+++ b/board/freescale/mpc8541cds/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds
index b551339..785a006 100644
--- a/board/freescale/mpc8544ds/u-boot.lds
+++ b/board/freescale/mpc8544ds/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds
index 03f62b8..eba7e8a 100644
--- a/board/freescale/mpc8548cds/u-boot.lds
+++ b/board/freescale/mpc8548cds/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc8555cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds
index d0ba43c..5f4dcf0 100644
--- a/board/freescale/mpc8555cds/u-boot.lds
+++ b/board/freescale/mpc8555cds/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds
index 31412e3..cb30ea9 100644
--- a/board/freescale/mpc8560ads/u-boot.lds
+++ b/board/freescale/mpc8560ads/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc8568mds/bcsr.h b/board/freescale/mpc8568mds/bcsr.h
index f7f70bc..046025b 100644
--- a/board/freescale/mpc8568mds/bcsr.h
+++ b/board/freescale/mpc8568mds/bcsr.h
@@ -32,8 +32,8 @@
7 cfg boot seq
* BCSR 1 *
- 0:2 cfg rom lock
- 3:5 cfg host agent
+ 0:2 cfg rom lock
+ 3:5 cfg host agent
6 PCI IO
7 cfg RIO size
@@ -46,7 +46,7 @@
0 TSEC1 reduce
1 TSEC2 reduce
2:3 TSEC1 protocol
- 4:5 TSEC2 protocol
+ 4:5 TSEC2 protocol
6 PHY1 slave
7 PHY2 slave
@@ -70,9 +70,9 @@
7 Power on reset
* BCSR 7 *
- 2 board host mode indication
- 5 enable TSEC1 PHY
- 6 enable TSEC2 PHY
+ 2 board host mode indication
+ 5 enable TSEC1 PHY
+ 6 enable TSEC2 PHY
* BCSR 8 *
0 UCC GETH1 enable
diff --git a/board/freescale/mpc8568mds/tlb.c b/board/freescale/mpc8568mds/tlb.c
index a866c52..7565176 100644
--- a/board/freescale/mpc8568mds/tlb.c
+++ b/board/freescale/mpc8568mds/tlb.c
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
/*
* TLBe 2: 1G Non-cacheable, guarded
* 0x80000000 512M PCI1 MEM
- * 0xa0000000 512M PCIe MEM
+ * 0xa0000000 512M PCIe MEM
*/
SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
diff --git a/board/freescale/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds
index 40f6d3b..1b83834 100644
--- a/board/freescale/mpc8568mds/u-boot.lds
+++ b/board/freescale/mpc8568mds/u-boot.lds
@@ -45,11 +45,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/freescale/mpc8641hpcn/u-boot.lds b/board/freescale/mpc8641hpcn/u-boot.lds
index 06d491b..4f884f9 100644
--- a/board/freescale/mpc8641hpcn/u-boot.lds
+++ b/board/freescale/mpc8641hpcn/u-boot.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/g2000/u-boot.lds b/board/g2000/u-boot.lds
index 196f88c..d70d379 100644
--- a/board/g2000/u-boot.lds
+++ b/board/g2000/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/gen860t/README b/board/gen860t/README
index 7205afb..e20680d 100644
--- a/board/gen860t/README
+++ b/board/gen860t/README
@@ -142,5 +142,3 @@ Sr. Staff Engineer
Microvision, Inc.
<keith_outwater@mvis.com>
<outwater@eskimo.com>
-
-vim: set ts=4 sw=4 tw=78:
diff --git a/board/gen860t/beeper.c b/board/gen860t/beeper.c
index 46fe66b..b4c2c89 100644
--- a/board/gen860t/beeper.c
+++ b/board/gen860t/beeper.c
@@ -34,7 +34,6 @@
* drives the amplifier input.
*/
-
/*
* Initialize beeper-related hardware. Initialize timer 1 for use with
* the beeper. Use 66 Mhz internal clock with prescale of 33 to get
@@ -42,66 +41,59 @@
* FIXME: we should really compute the prescale based on the reported
* core clock frequency.
*/
-void
-init_beeper(void)
+void init_beeper (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
immap->im_cpmtimer.cpmt_tgcr &= ~TGCR_RST1 | TGCR_STP1;
immap->im_cpmtimer.cpmt_tmr1 = ((33 << TMR_PS_SHIFT) & TMR_PS_MSK)
- | TMR_OM | TMR_FRR | TMR_ICLK_IN_GEN;
+ | TMR_OM | TMR_FRR | TMR_ICLK_IN_GEN;
immap->im_cpmtimer.cpmt_tcn1 = 0;
immap->im_cpmtimer.cpmt_ter1 = 0xffff;
immap->im_cpmtimer.cpmt_tgcr |= TGCR_RST1;
}
-
/*
* Set beeper frequency. Max allowed frequency is 2.5 KHz. This limit
* is mostly arbitrary, but the beeper isn't really much good beyond this
* frequency.
*/
-void
-set_beeper_frequency(uint frequency)
+void set_beeper_frequency (uint frequency)
{
#define FREQ_LIMIT 2500
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
/*
* Compute timer ticks given desired frequency. The timer is set up
* to count 0.5 uS per tick and it takes two ticks per cycle (Hz).
*/
- if (frequency > FREQ_LIMIT) frequency = FREQ_LIMIT;
- frequency = 1000000/frequency;
- immap->im_cpmtimer.cpmt_trr1 = (ushort)frequency;
+ if (frequency > FREQ_LIMIT)
+ frequency = FREQ_LIMIT;
+ frequency = 1000000 / frequency;
+ immap->im_cpmtimer.cpmt_trr1 = (ushort) frequency;
}
-
/*
* Turn the beeper on
*/
-void
-beeper_on(void)
+void beeper_on (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
immap->im_cpmtimer.cpmt_tgcr &= ~TGCR_STP1;
}
-
/*
* Turn the beeper off
*/
-void
-beeper_off(void)
+void beeper_off (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
immap->im_cpmtimer.cpmt_tgcr |= TGCR_STP1;
}
-
/*
* Increase or decrease the beeper volume. Volume can be set
* from off to full in 64 steps. To increase volume, the output
@@ -110,75 +102,71 @@ beeper_off(void)
* change pin mode to tristate) then output a high to go back to
* tristate.
*/
-void
-set_beeper_volume(int steps)
+void set_beeper_volume (int steps)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
int i;
if (steps >= 0) {
for (i = 0; i < (steps >= 64 ? 64 : steps); i++) {
immap->im_cpm.cp_pbodr &= ~(0x80000000 >> 19);
- udelay(1);
+ udelay (1);
immap->im_cpm.cp_pbodr |= (0x80000000 >> 19);
- udelay(1);
+ udelay (1);
}
- }
- else {
+ } else {
for (i = 0; i > (steps <= -64 ? -64 : steps); i--) {
immap->im_cpm.cp_pbdat &= ~(0x80000000 >> 19);
- udelay(1);
+ udelay (1);
immap->im_cpm.cp_pbdat |= (0x80000000 >> 19);
- udelay(1);
+ udelay (1);
}
}
}
-
/*
* Check the environment to see if the beeper needs beeping.
* Controlled by a sequence of the form:
* freq/delta volume/on time/off time;... where:
- * freq = frequency in Hz (0 - 2500)
+ * freq = frequency in Hz (0 - 2500)
* delta volume = volume steps up or down (-64 <= vol <= 64)
* on time = time in mS
* off time = time in mS
*
* Return 1 on success, 0 on failure
*/
-int
-do_beeper(char *sequence)
+int do_beeper (char *sequence)
{
#define DELIMITER ';'
-int args[4];
-int i;
-int val;
-char *p = sequence;
-char *tp;
+ int args[4];
+ int i;
+ int val;
+ char *p = sequence;
+ char *tp;
/*
* Parse the control sequence. This is a really simple parser
* without any real error checking. You can probably blow it
* up really easily.
*/
- if (*p == '\0' || !isdigit(*p)) {
- printf("%s:%d: null or invalid string (%s)\n",
- __FILE__, __LINE__, p);
+ if (*p == '\0' || !isdigit (*p)) {
+ printf ("%s:%d: null or invalid string (%s)\n",
+ __FILE__, __LINE__, p);
return 0;
}
i = 0;
while (*p != '\0') {
while (*p != DELIMITER) {
- if (i > 3) i = 0;
- val = (int) simple_strtol(p, &tp, 0);
+ if (i > 3)
+ i = 0;
+ val = (int) simple_strtol (p, &tp, 0);
if (tp == p) {
- printf("%s:%d: no digits or bad format\n",
- __FILE__,__LINE__);
+ printf ("%s:%d: no digits or bad format\n",
+ __FILE__, __LINE__);
return 0;
- }
- else {
+ } else {
args[i] = val;
}
@@ -195,19 +183,17 @@ char *tp;
*/
#if 0
for (i = 0; i < 4; i++) {
- printf("%s:%d:arg %d = %d\n", __FILE__, __LINE__, i, args[i]);
+ printf ("%s:%d:arg %d = %d\n", __FILE__, __LINE__, i,
+ args[i]);
}
- printf("\n");
+ printf ("\n");
#endif
-
- set_beeper_frequency(args[0]);
- set_beeper_volume(args[1]);
- beeper_on();
- udelay(1000 * args[2]);
- beeper_off();
- udelay(1000 * args[3]);
+ set_beeper_frequency (args[0]);
+ set_beeper_volume (args[1]);
+ beeper_on ();
+ udelay (1000 * args[2]);
+ beeper_off ();
+ udelay (1000 * args[3]);
}
return 1;
}
-
-/* vim: set ts=4 sw=4 tw=78: */
diff --git a/board/gen860t/beeper.h b/board/gen860t/beeper.h
index 535ee6c..125b90f 100644
--- a/board/gen860t/beeper.h
+++ b/board/gen860t/beeper.h
@@ -27,5 +27,3 @@ void beeper_on(void);
void beeper_off(void);
void set_beeper_volume(int steps);
int do_beeper(char *sequence);
-
-/* vim: set ts=4 tw=78 sw=4: */
diff --git a/board/gen860t/flash.c b/board/gen860t/flash.c
index ec32d07..13faaf3 100644
--- a/board/gen860t/flash.c
+++ b/board/gen860t/flash.c
@@ -156,9 +156,9 @@ flash_init (void)
* Monitor protection is ON by default
*/
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
#endif
#ifdef CFG_ENV_IS_IN_FLASH
@@ -166,9 +166,9 @@ flash_init (void)
* Environment protection ON by default
*/
flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
#endif
PRINTF("## Final Flash bank size: 0x%08lx\n",size_b0);
@@ -190,14 +190,14 @@ flash_get_offsets (ulong base, flash_info_t *info)
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL:
- for (i = 0; i < info->sector_count; i++) {
+ for (i = 0; i < info->sector_count; i++) {
info->start[i] = base;
base += 1024 * 128;
- }
- return;
+ }
+ return;
default:
- printf ("Don't know sector offsets for FLASH"
+ printf ("Don't know sector offsets for FLASH"
" type 0x%lx\n", info->flash_id);
return;
}
@@ -436,7 +436,7 @@ write_flash_buffer8(flash_info_t *info_p, vu_char *src_p, vu_char *dest_p,
* We assume that the block does not cross a boundary (we'll check before
* calling this function).
*/
- for (i = 0; i < info_p->sector_count; ++i) {
+ for (i = 0; i < info_p->sector_count; ++i) {
if ( ((ulong)dest_p >= info_p->start[i]) &&
((ulong)dest_p < (info_p->start[i] + blocksize)) ) {
PRINTF("%s:%d: Dest addr 0x%p is in block %d @ 0x%.8lx\n",
diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c
index 3816e52..1e6bdf1 100644
--- a/board/gen860t/fpga.c
+++ b/board/gen860t/fpga.c
@@ -376,5 +376,3 @@ int fpga_busy_fn (int cookie)
return 0;
}
#endif
-
-/* vim: set ts=4 tw=78 sw=4: */
diff --git a/board/gen860t/fpga.h b/board/gen860t/fpga.h
index 01967a4..18deb73 100644
--- a/board/gen860t/fpga.h
+++ b/board/gen860t/fpga.h
@@ -41,5 +41,3 @@ extern int fpga_busy_fn(int cookie);
extern int fpga_abort_fn(int cookie );
extern int fpga_pre_config_fn(int cookie );
extern int fpga_post_config_fn(int cookie );
-
-/* vim: set ts=4 sw=4 tw=78: */
diff --git a/board/gen860t/ioport.c b/board/gen860t/ioport.c
index 1fc9545..d8c3006 100644
--- a/board/gen860t/ioport.c
+++ b/board/gen860t/ioport.c
@@ -43,10 +43,10 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
/*
* Port A configuration
* Pin Signal Type Active Initial state
- * PA7 fpgaProgramLowOut Out Low High
- * PA1 fpgaCoreVoltageFailLow In Low N/A
+ * PA7 fpgaProgramLowOut Out Low High
+ * PA1 fpgaCoreVoltageFailLow In Low N/A
*/
- { /* conf ppar psor pdir podr pdat pint function */
+ { /* conf ppar psor pdir podr pdat pint function */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */
/* PA15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
@@ -83,7 +83,7 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
* PB23 batteryOkSig In High X
* PB31 pulseCatcherClr Out High 0
*/
- { /* conf ppar psor pdir podr pdat pint function */
+ { /* conf ppar psor pdir podr pdat pint function */
#if !defined(CONFIG_SC)
/* PB31 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
#else
@@ -116,7 +116,7 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
#if !defined(CONFIG_SC)
/* PB14 */ { 1, 0, 0, 0, 0, 0, 0 } /* docBusyLow */
#else
- /* PB14 */ { 0, 0, 0, 0, 0, 0, 0 } /* */
+ /* PB14 */ { 0, 0, 0, 0, 0, 0, 0 } /* */
#endif
},
@@ -132,7 +132,7 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
* PC12 systemBitOkIn In High X
* PC15 selfDreqLow In Low X
*/
- { /* conf ppar psor pdir podr pdat pint function */
+ { /* conf ppar psor pdir podr pdat pint function */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PC15 */ { 1, 0, 0, 0, 0, 0, 0 }, /* selfDreqLowIn */
@@ -141,7 +141,7 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
#if !defined(CONFIG_SC)
/* PC12 */ { 1, 0, 0, 0, 0, 0, 0 }, /* systemBitOkIn */
#else
- /* PC12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ /* PC12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
#endif
/* PC11 */ { 1, 0, 0, 1, 0, 1, 0 }, /* fpgaResetLowOut */
#if !defined(CONFIG_SC)
@@ -173,7 +173,7 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
/*
* Port D configuration
*/
- { /* conf ppar psor pdir podr pdat pint function */
+ { /* conf ppar psor pdir podr pdat pint function */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PD15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
diff --git a/board/gen860t/ioport.h b/board/gen860t/ioport.h
index 34a2d7b..3af0bc9 100644
--- a/board/gen860t/ioport.h
+++ b/board/gen860t/ioport.h
@@ -40,5 +40,3 @@ typedef struct {
} mpc8xx_iop_conf_t;
extern void config_mpc8xx_ioports(volatile immap_t *immr);
-
-/* vim: set ts=4 tw=78 sw=4: */
diff --git a/board/gen860t/u-boot-flashenv.lds b/board/gen860t/u-boot-flashenv.lds
index aa124f9..bb03d3a 100644
--- a/board/gen860t/u-boot-flashenv.lds
+++ b/board/gen860t/u-boot-flashenv.lds
@@ -36,11 +36,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds
index ce1ffe0..d33aa2e 100644
--- a/board/gen860t/u-boot.lds
+++ b/board/gen860t/u-boot.lds
@@ -35,11 +35,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/genietv/flash.c b/board/genietv/flash.c
index 1c1728b..7292c9c 100644
--- a/board/genietv/flash.c
+++ b/board/genietv/flash.c
@@ -131,11 +131,11 @@ void flash_print_info (flash_info_t *info)
if (info->size >> 20) {
printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
+ info->size >> 20,
info->sector_count);
} else {
printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10,
+ info->size >> 10,
info->sector_count);
}
@@ -213,7 +213,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x00080000;
- break; /* => 512Kb */
+ break; /* => 512Kb */
default:
info->flash_id = FLASH_UNKNOWN;
@@ -448,7 +448,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts();
/* data polling for D7 */
start = get_timer (0);
diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds
index 0c6417f..3573608 100644
--- a/board/genietv/u-boot.lds
+++ b/board/genietv/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug
index 3251ec3..8dedba8 100644
--- a/board/genietv/u-boot.lds.debug
+++ b/board/genietv/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/gth/flash.c b/board/gth/flash.c
index 41a5c50..11e105e 100644
--- a/board/gth/flash.c
+++ b/board/gth/flash.c
@@ -75,7 +75,7 @@ unsigned long flash_init (void)
if (size_b1 > size_b0) {
printf ("## ERROR: Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,size_b0, size_b0<<20);
+ size_b1, size_b1<<20,size_b0, size_b0<<20);
flash_info[0].flash_id = FLASH_UNKNOWN;
flash_info[1].flash_id = FLASH_UNKNOWN;
diff --git a/board/gth/u-boot.lds b/board/gth/u-boot.lds
index facb88a..95f9445 100644
--- a/board/gth/u-boot.lds
+++ b/board/gth/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds
index 45e812c..5f5fb0d 100644
--- a/board/hermes/u-boot.lds
+++ b/board/hermes/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug
index f87bd07..41d603f 100644
--- a/board/hermes/u-boot.lds.debug
+++ b/board/hermes/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/hidden_dragon/speed.h b/board/hidden_dragon/speed.h
index b66393b..3f32a14 100644
--- a/board/hidden_dragon/speed.h
+++ b/board/hidden_dragon/speed.h
@@ -28,10 +28,10 @@
* SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
*
* SPEED_FCOUNT2 timer 2 counting frequency
- * GCLK CPU clock
+ * GCLK CPU clock
* SPEED_TMR2_PS prescaler
*/
-#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
/*-----------------------------------------------------------------------
* Timer value for PIT
diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c
index 5e98e9e..13e60e2 100644
--- a/board/hymod/hymod.c
+++ b/board/hymod/hymod.c
@@ -86,7 +86,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
{ 1, 0, 0, 1, 0, 0 }, /* PA03: VM ENABLE */
{ 1, 0, 0, 0, 1, 0 }, /* PA02: VM DONE */
{ 1, 0, 0, 1, 1, 0 }, /* PA01: VM INIT */
- { 1, 0, 0, 1, 0, 0 } /* PA00: VM ~PROG */
+ { 1, 0, 0, 1, 0, 0 } /* PA00: VM ~PROG */
},
/* Port B configuration */
@@ -414,10 +414,10 @@ initdram (int board_type)
/* ------------------------------------------------------------------------- */
/* miscellaneous initialisations after relocation into ram (misc_init_r) */
-/* */
+/* */
/* loads the data in the main board and mezzanine board eeproms into */
/* the hymod configuration struct stored in the board information area. */
-/* */
+/* */
/* if the contents of either eeprom is invalid, prompts for a serial */
/* number (and an ethernet address if required) then fetches a file */
/* containing information to be stored in the eeprom from the tftp server */
diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds
index 6189149..cb7b4ea 100644
--- a/board/hymod/u-boot.lds
+++ b/board/hymod/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug
index 753411f..c33581d 100644
--- a/board/hymod/u-boot.lds.debug
+++ b/board/hymod/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/icu862/pcmcia.c b/board/icu862/pcmcia.c
index 11de183..20922d8 100644
--- a/board/icu862/pcmcia.c
+++ b/board/icu862/pcmcia.c
@@ -223,10 +223,10 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
reg = cp->cp_pbdat;
switch(vcc) {
- case 0: break; /* Switch off */
+ case 0: break; /* Switch off */
case 33: reg &= ~TPS2205_VCC3; break; /* Switch on 3.3V */
case 50: reg &= ~TPS2205_VCC5; break; /* Switch on 5.0V */
- default: goto done;
+ default: goto done;
}
/* Checking supported voltages */
diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds
index cd388d0..be4bf72 100644
--- a/board/icu862/u-boot.lds
+++ b/board/icu862/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug
index 452c6c0..7a7a40c 100644
--- a/board/icu862/u-boot.lds.debug
+++ b/board/icu862/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds
index bc83534..c07d023 100644
--- a/board/idmr/u-boot.lds
+++ b/board/idmr/u-boot.lds
@@ -34,11 +34,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/imx31_litekit/lowlevel_init.S b/board/imx31_litekit/lowlevel_init.S
index 88b5261..9d96db8 100644
--- a/board/imx31_litekit/lowlevel_init.S
+++ b/board/imx31_litekit/lowlevel_init.S
@@ -62,9 +62,9 @@ lowlevel_init:
REG 0x43FAC26C, 0 /* SDCLK */
REG 0x43FAC270, 0 /* CAS */
REG 0x43FAC274, 0 /* RAS */
- REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
+ REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
REG 0x43FAC284, 0 /* DQM3 */
- REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
+ REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
REG 0x43FAC28C, 0
REG 0x43FAC290, 0
REG 0x43FAC294, 0
diff --git a/board/imx31_phycore/lowlevel_init.S b/board/imx31_phycore/lowlevel_init.S
index 4895b6a..70f30c0 100644
--- a/board/imx31_phycore/lowlevel_init.S
+++ b/board/imx31_phycore/lowlevel_init.S
@@ -63,9 +63,9 @@ lowlevel_init:
REG 0x43FAC26C, 0 /* SDCLK */
REG 0x43FAC270, 0 /* CAS */
REG 0x43FAC274, 0 /* RAS */
- REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
+ REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
REG 0x43FAC284, 0 /* DQM3 */
- REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
+ REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
REG 0x43FAC28C, 0
REG 0x43FAC290, 0
REG 0x43FAC294, 0
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index 298acc8..8fc6e5b 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -88,8 +88,8 @@ ulong flash_init(void)
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
@@ -350,7 +350,7 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
* @param info:
* @param src: source of copy transaction
* @param addr: where to copy to
- * @param cnt: number of bytes to copy
+ * @param cnt: number of bytes to copy
*
* @return error code
*/
diff --git a/board/innokom/lowlevel_init.S b/board/innokom/lowlevel_init.S
index aa9dcba..4c9f10f 100644
--- a/board/innokom/lowlevel_init.S
+++ b/board/innokom/lowlevel_init.S
@@ -43,7 +43,7 @@ _TEXT_BASE:
/*
- * Memory setup
+ * Memory setup
*/
.globl lowlevel_init
@@ -129,8 +129,8 @@ lowlevel_init:
/*loop: */
/* */
/* ldr r0, =0xB0070001 */
-/* ldr r1, =_LED */
-/* str r0, [r1] / hex display */
+/* ldr r1, =_LED */
+/* str r0, [r1] / hex display */
/* ---------------------------------------------------------------- */
@@ -239,7 +239,7 @@ mem_init:
/* Before accessing MDREFR we need a valid DRI field, so we set */
/* this to power on defaults + DRI field. */
- ldr r3, =CFG_MDREFR_VAL
+ ldr r3, =CFG_MDREFR_VAL
ldr r2, =0xFFF
and r3, r3, r2
ldr r4, =0x03ca4000
diff --git a/board/integratorap/memsetup.S b/board/integratorap/memsetup.S
index dfdc784..da43cb6 100644
--- a/board/integratorap/memsetup.S
+++ b/board/integratorap/memsetup.S
@@ -20,7 +20,7 @@
* MA 02111-1307 USA
*/
/*
- * Memory setup
+ * Memory setup
* - the reset defaults are assumed sufficient
*/
diff --git a/board/integratorap/split_by_variant.sh b/board/integratorap/split_by_variant.sh
index 4b94d8f..8c54250 100755
--- a/board/integratorap/split_by_variant.sh
+++ b/board/integratorap/split_by_variant.sh
@@ -3,7 +3,7 @@
# Set the platform defines
# ---------------------------------------------------------
echo -n "/* Integrator configuration implied " > tmp.fil
-echo " by Makefile target */" >> tmp.fil
+echo " by Makefile target */" >> tmp.fil
echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil
echo " /* Integrator board */" >> tmp.fil
echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil
@@ -42,22 +42,22 @@ else
ap720t_config)
cpu="arm720t"
- echo -n "#define CONFIG_CM720T" >> tmp.fil
- echo " 1 /* CPU core is ARM720T */ " >> tmp.fil
+ echo -n "#define CONFIG_CM720T" >> tmp.fil
+ echo " 1 /* CPU core is ARM720T */ " >> tmp.fil
variant="Core module CM720T"
;;
ap922_XA10_config)
cpu="arm_intcm"
variant="unported core module CM922T_XA10"
- echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil
- echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil
+ echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil
+ echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil
;;
ap920t_config)
cpu="arm920t"
variant="Core module CM920T"
- echo -n "#define CONFIG_CM920T" >> tmp.fil
+ echo -n "#define CONFIG_CM920T" >> tmp.fil
echo " 1 /* CPU core is ARM920T */" >> tmp.fil
;;
@@ -89,19 +89,19 @@ then
echo "/* Core module undefined/not ported */" >> tmp.fil
echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
+ echo -n " /* CM may not have " >> tmp.fil
echo "multiple SSRAM mapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
- echo -n " /* CM may not support SPD " >> tmp.fil
+ echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
+ echo -n " /* CM may not support SPD " >> tmp.fil
echo "query */" >> tmp.fil
- echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil
+ echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil
echo -n " /* CM may not support " >> tmp.fil
- echo "remapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_INIT " >> tmp.fil
+ echo "remapping */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_INIT " >> tmp.fil
echo -n " /* CM may not have " >> tmp.fil
echo "initialization reg */" >> tmp.fil
- echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
- echo " /* CM may not have TCRAM */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
+ echo " /* CM may not have TCRAM */" >> tmp.fil
fi
mkdir -p ${obj}include
diff --git a/board/integratorcp/flash.c b/board/integratorcp/flash.c
index 4d6eff0..b653c05 100644
--- a/board/integratorcp/flash.c
+++ b/board/integratorcp/flash.c
@@ -73,7 +73,7 @@ OrgDef OrgIntel_28F256L18T[] = {
};
/* CP control register base address */
-#define CPCR_BASE 0xCB000000
+#define CPCR_BASE 0xCB000000
#define CPCR_EXTRABANK 0x8
#define CPCR_FLASHSIZE 0x4
#define CPCR_FLWREN 0x2
diff --git a/board/integratorcp/memsetup.S b/board/integratorcp/memsetup.S
index dfdc784..da43cb6 100644
--- a/board/integratorcp/memsetup.S
+++ b/board/integratorcp/memsetup.S
@@ -20,7 +20,7 @@
* MA 02111-1307 USA
*/
/*
- * Memory setup
+ * Memory setup
* - the reset defaults are assumed sufficient
*/
diff --git a/board/integratorcp/split_by_variant.sh b/board/integratorcp/split_by_variant.sh
index 79a6a9d..3f0a447 100755
--- a/board/integratorcp/split_by_variant.sh
+++ b/board/integratorcp/split_by_variant.sh
@@ -3,11 +3,11 @@
# Set the platform defines
# ---------------------------------------------------------
echo -n "/* Integrator configuration implied " > tmp.fil
-echo " by Makefile target */" >> tmp.fil
-echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil
-echo " /* Integrator board */" >> tmp.fil
+echo " by Makefile target */" >> tmp.fil
+echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil
+echo " /* Integrator board */" >> tmp.fil
echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil
-echo " 1 /* Integrator/CP */" >> tmp.fil
+echo " 1 /* Integrator/CP */" >> tmp.fil
cpu="arm_intcm"
variant="unknown core module"
@@ -36,14 +36,14 @@ else
cp922_XA10_config)
cpu="arm_intcm"
variant="unported core module CM922T_XA10"
- echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil
- echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil
+ echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil
+ echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil
;;
cp920t_config)
cpu="arm920t"
variant="Core module CM920T"
- echo -n "#define CONFIG_CM920T" >> tmp.fil
+ echo -n "#define CONFIG_CM920T" >> tmp.fil
echo " 1 /* CPU core is ARM920T */" >> tmp.fil
;;
@@ -82,21 +82,21 @@ fi
if [ "$cpu" = "arm_intcm" ]
then
echo "/* Core module undefined/not ported */" >> tmp.fil
- echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
+ echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
- echo "multiple SSRAM mapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
- echo -n " /* CM may not support SPD " >> tmp.fil
- echo "query */" >> tmp.fil
- echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil
- echo -n " /* CM may not support " >> tmp.fil
- echo "remapping */" >> tmp.fil
- echo -n "#undef CONFIG_CM_INIT " >> tmp.fil
- echo -n " /* CM may not have " >> tmp.fil
- echo "initialization reg */" >> tmp.fil
- echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
- echo " /* CM may not have TCRAM */" >> tmp.fil
+ echo -n " /* CM may not have " >> tmp.fil
+ echo "multiple SSRAM mapping */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
+ echo -n " /* CM may not support SPD " >> tmp.fil
+ echo "query */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil
+ echo -n " /* CM may not support " >> tmp.fil
+ echo "remapping */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_INIT " >> tmp.fil
+ echo -n " /* CM may not have " >> tmp.fil
+ echo "initialization reg */" >> tmp.fil
+ echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
+ echo " /* CM may not have TCRAM */" >> tmp.fil
fi
mkdir -p ${obj}include
diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds
index 6556ed5..ef88297 100644
--- a/board/ip860/u-boot.lds
+++ b/board/ip860/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug
index f571350..ad685e6 100644
--- a/board/ip860/u-boot.lds.debug
+++ b/board/ip860/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds
index bbd93ee..d7f360f 100644
--- a/board/ivm/u-boot.lds
+++ b/board/ivm/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug
index c6f2ad5..995fc83 100644
--- a/board/ivm/u-boot.lds.debug
+++ b/board/ivm/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ixdp425/flash.c b/board/ixdp425/flash.c
index 1d958c8..704dea8 100644
--- a/board/ixdp425/flash.c
+++ b/board/ixdp425/flash.c
@@ -35,19 +35,19 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#define FLASH_PORT_WIDTH16
#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) x
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) x
#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) __swab32(x)
#endif
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
-#define mb() __asm__ __volatile__ ("" : : : "memory")
+#define mb() __asm__ __volatile__ ("" : : : "memory")
/*-----------------------------------------------------------------------
* Functions
diff --git a/board/jse/u-boot.lds b/board/jse/u-boot.lds
index 96101ec..7e060cb 100644
--- a/board/jse/u-boot.lds
+++ b/board/jse/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds
index 174060e..6dccf95 100644
--- a/board/korat/u-boot-F7FC.lds
+++ b/board/korat/u-boot-F7FC.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/korat/u-boot.lds b/board/korat/u-boot.lds
index da2a400..b20fb1c 100644
--- a/board/korat/u-boot.lds
+++ b/board/korat/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/kup/common/pcmcia.c b/board/kup/common/pcmcia.c
index def38f1..8f0cf17 100644
--- a/board/kup/common/pcmcia.c
+++ b/board/kup/common/pcmcia.c
@@ -188,7 +188,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3; /* active low */
switch(vcc) {
- case 0: break;
+ case 0: break;
case 33:
cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
debug ("PCMCIA powered at 3.3V\n");
diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds
index e0ae224..2e9169c 100644
--- a/board/kup/kup4k/u-boot.lds
+++ b/board/kup/kup4k/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug
index 4942c42..f6d1537 100644
--- a/board/kup/kup4k/u-boot.lds.debug
+++ b/board/kup/kup4k/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds
index e0ae224..2e9169c 100644
--- a/board/kup/kup4x/u-boot.lds
+++ b/board/kup/kup4x/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug
index 4942c42..f6d1537 100644
--- a/board/kup/kup4x/u-boot.lds.debug
+++ b/board/kup/kup4x/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/lantec/u-boot.lds b/board/lantec/u-boot.lds
index 688846b..2d26643 100644
--- a/board/lantec/u-boot.lds
+++ b/board/lantec/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/lantec/u-boot.lds.debug b/board/lantec/u-boot.lds.debug
index a39ee9d..7dc4408 100644
--- a/board/lantec/u-boot.lds.debug
+++ b/board/lantec/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/linkstation/avr.c b/board/linkstation/avr.c
index 68bc545..a689c63 100644
--- a/board/linkstation/avr.c
+++ b/board/linkstation/avr.c
@@ -35,7 +35,7 @@
/* LED commands */
#define PWRBLINKSTRT '[' /* Blink power LED */
#define PWRBLINKSTOP 'Z' /* Solid power LED */
-#define HDDLEDON 'W' /* HDD LED on */
+#define HDDLEDON 'W' /* HDD LED on */
#define HDDLEDOFF 'V' /* HDD LED off */
#define HDDBLINKSTRT 'Y' /* HDD LED start blink */
#define HDDBLINKSTOP 'X' /* HDD LED stop blink */
@@ -57,7 +57,7 @@ static char *consoles[] = {
"nc",
#endif
};
-#define MAX_CONS_CHOICE (sizeof(consoles)/sizeof(char *))
+#define MAX_CONS_CHOICE (sizeof(consoles)/sizeof(char *))
#if !defined(CONFIG_NETCONSOLE)
#define DEF_CONS_CHOICE 0
diff --git a/board/logodl/flash.c b/board/logodl/flash.c
index a947731..0807b80 100644
--- a/board/logodl/flash.c
+++ b/board/logodl/flash.c
@@ -593,7 +593,7 @@ int bad_write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
* @param info:
* @param src: source of copy transaction
* @param addr: where to copy to
- * @param cnt: number of bytes to copy
+ * @param cnt: number of bytes to copy
*
* @return error code
*/
diff --git a/board/logodl/lowlevel_init.S b/board/logodl/lowlevel_init.S
index aa9dcba..4c9f10f 100644
--- a/board/logodl/lowlevel_init.S
+++ b/board/logodl/lowlevel_init.S
@@ -43,7 +43,7 @@ _TEXT_BASE:
/*
- * Memory setup
+ * Memory setup
*/
.globl lowlevel_init
@@ -129,8 +129,8 @@ lowlevel_init:
/*loop: */
/* */
/* ldr r0, =0xB0070001 */
-/* ldr r1, =_LED */
-/* str r0, [r1] / hex display */
+/* ldr r1, =_LED */
+/* str r0, [r1] / hex display */
/* ---------------------------------------------------------------- */
@@ -239,7 +239,7 @@ mem_init:
/* Before accessing MDREFR we need a valid DRI field, so we set */
/* this to power on defaults + DRI field. */
- ldr r3, =CFG_MDREFR_VAL
+ ldr r3, =CFG_MDREFR_VAL
ldr r2, =0xFFF
and r3, r3, r2
ldr r4, =0x03ca4000
diff --git a/board/lpc2292sodimm/lowlevel_init.S b/board/lpc2292sodimm/lowlevel_init.S
index a0e9747..4e8eb89 100644
--- a/board/lpc2292sodimm/lowlevel_init.S
+++ b/board/lpc2292sodimm/lowlevel_init.S
@@ -23,19 +23,19 @@
/* some parameters for the board */
/* setting up the memory */
-#define SRAM_START 0x40000000
-#define SRAM_SIZE 0x00004000
-#define BCFG0_VALUE 0x1000ffef
-#define BCFG1_VALUE 0x10001C61
+#define SRAM_START 0x40000000
+#define SRAM_SIZE 0x00004000
+#define BCFG0_VALUE 0x1000ffef
+#define BCFG1_VALUE 0x10001C61
_TEXT_BASE:
.word TEXT_BASE
MEMMAP_ADR:
.word MEMMAP
BCFG0_ADR:
- .word BCFG0
+ .word BCFG0
_BCFG0_VALUE:
- .word BCFG0_VALUE
+ .word BCFG0_VALUE
BCFG1_ADR:
.word BCFG1
_BCFG1_VALUE:
diff --git a/board/lpd7a40x/lowlevel_init.S b/board/lpd7a40x/lowlevel_init.S
index b3ed55c..780b931 100644
--- a/board/lpd7a40x/lowlevel_init.S
+++ b/board/lpd7a40x/lowlevel_init.S
@@ -38,7 +38,7 @@
#define BCRX_IDCY_SHIFT (0)
/* Bank0 Async Flash */
-#define BCR0 (0x80002000)
+#define BCR0 (0x80002000)
#define BCR0_FLASH (BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT))
/* Bank1 Open */
@@ -55,7 +55,7 @@
/* Bank5 PC Card2 */
/* Bank6 CPLD IO Controller Peripherals (slow) */
-#define BCR6 (0x80002018)
+#define BCR6 (0x80002018)
#define BCR6_CPLD_SLOW (BCRX_DEFAULT | BCRX_MW_16)
/* Bank7 CPLD IO Controller Peripherals (fast) */
diff --git a/board/lubbock/lowlevel_init.S b/board/lubbock/lowlevel_init.S
index 15276e8..2a9bcbf 100644
--- a/board/lubbock/lowlevel_init.S
+++ b/board/lubbock/lowlevel_init.S
@@ -40,7 +40,7 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
/*
- * Memory setup
+ * Memory setup
*/
.globl lowlevel_init
diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c
index ebca7a2..8825bd9 100644
--- a/board/lwmon/pcmcia.c
+++ b/board/lwmon/pcmcia.c
@@ -204,10 +204,10 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
val = 0;
switch(vcc) {
- case 0: break;
+ case 0: break;
case 33: val = MAX1604_VCC_35; break;
- case 50: break;
- default: goto done;
+ case 50: break;
+ default: goto done;
}
/* Checking supported voltages */
diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds
index 9301571..bc1ea73 100644
--- a/board/lwmon/u-boot.lds
+++ b/board/lwmon/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug
index 44bae70..2ee8237 100644
--- a/board/lwmon/u-boot.lds.debug
+++ b/board/lwmon/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/lwmon5/u-boot.lds b/board/lwmon5/u-boot.lds
index da2a400..b20fb1c 100644
--- a/board/lwmon5/u-boot.lds
+++ b/board/lwmon5/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/m5271evb/u-boot.lds b/board/m5271evb/u-boot.lds
index bc83534..c07d023 100644
--- a/board/m5271evb/u-boot.lds
+++ b/board/m5271evb/u-boot.lds
@@ -34,11 +34,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/m5272c3/u-boot.lds b/board/m5272c3/u-boot.lds
index 884ff2d..8420c91 100644
--- a/board/m5272c3/u-boot.lds
+++ b/board/m5272c3/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/m5282evb/u-boot.lds b/board/m5282evb/u-boot.lds
index eea3230..dd2666b 100644
--- a/board/m5282evb/u-boot.lds
+++ b/board/m5282evb/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds
index 3ccdd33..2998e83 100644
--- a/board/mbx8xx/u-boot.lds
+++ b/board/mbx8xx/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug
index 96c4e22..fd2245f 100644
--- a/board/mbx8xx/u-boot.lds.debug
+++ b/board/mbx8xx/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mgsuvd/u-boot.lds b/board/mgsuvd/u-boot.lds
index 7ab29ef..8c46e46 100644
--- a/board/mgsuvd/u-boot.lds
+++ b/board/mgsuvd/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ml2/u-boot.lds b/board/ml2/u-boot.lds
index 9a05a61..c9406ad 100644
--- a/board/ml2/u-boot.lds
+++ b/board/ml2/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ml2/u-boot.lds.debug b/board/ml2/u-boot.lds.debug
index 88dcaf9..0552994 100644
--- a/board/ml2/u-boot.lds.debug
+++ b/board/ml2/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds
index 4e3b89d..86a1d85 100644
--- a/board/mousse/u-boot.lds
+++ b/board/mousse/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mousse/u-boot.lds.ram b/board/mousse/u-boot.lds.ram
index 68c4cca..46b98a0 100644
--- a/board/mousse/u-boot.lds.ram
+++ b/board/mousse/u-boot.lds.ram
@@ -24,9 +24,9 @@
OUTPUT_ARCH(powerpc)
MEMORY {
- ram (!rx) : org = 0x00000000 , LENGTH = 8M
- code (!rx) : org = 0x00002000 , LENGTH = (4M - 0x2000)
- rom (rx) : org = 0xfff00000 , LENGTH = 512K
+ ram (!rx) : org = 0x00000000 , LENGTH = 8M
+ code (!rx) : org = 0x00002000 , LENGTH = (4M - 0x2000)
+ rom (rx) : org = 0xfff00000 , LENGTH = 512K
}
SECTIONS
diff --git a/board/mousse/u-boot.lds.rom b/board/mousse/u-boot.lds.rom
index 952bf01..3ba7c3c 100644
--- a/board/mousse/u-boot.lds.rom
+++ b/board/mousse/u-boot.lds.rom
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mpc8540eval/u-boot.lds b/board/mpc8540eval/u-boot.lds
index ef4ea97..dadfc7d 100644
--- a/board/mpc8540eval/u-boot.lds
+++ b/board/mpc8540eval/u-boot.lds
@@ -35,11 +35,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 785d204..11d4345 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -219,7 +219,7 @@ mpl_prg_image(uchar *ld_addr)
uchar *buf;
/* reserve space for uncompressed image */
if ((buf = malloc(IMAGE_SIZE)) == NULL) {
- puts("Insufficient space for decompression\n");
+ puts("Insufficient space for decompression\n");
return 1;
}
@@ -461,7 +461,7 @@ void show_stdio_dev(void)
int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- ulong size,src,ld_addr;
+ ulong size,src,ld_addr;
int result;
#if !defined(CONFIG_PATI)
backup_t back;
@@ -473,11 +473,11 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
#if defined(CONFIG_CMD_FDC)
if (strcmp(argv[2], "floppy") == 0) {
- char *local_args[3];
+ char *local_args[3];
extern int do_fdcboot (cmd_tbl_t *, int, int, char *[]);
puts("\nupdating bootloader image from floppy\n");
local_args[0] = argv[0];
- if(argc==4) {
+ if(argc==4) {
local_args[1] = argv[3];
local_args[2] = NULL;
ld_addr=simple_strtoul(argv[3], NULL, 16);
@@ -493,7 +493,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
#endif
if (strcmp(argv[2], "mem") == 0) {
- if(argc==4) {
+ if(argc==4) {
ld_addr=simple_strtoul(argv[3], NULL, 16);
}
else {
@@ -524,7 +524,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
src&=0xfff00000;
size=0;
do {
- size++;
+ size++;
printf("\n\nPass %ld\n",size);
mem_test(CFG_MEMTEST_START,src,1);
if(ctrlc())
@@ -538,7 +538,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#if !defined(CONFIG_PATI)
if (strcmp(argv[1], "clearenvvalues") == 0)
{
- if (strcmp(argv[2], "yes") == 0)
+ if (strcmp(argv[2], "yes") == 0)
{
clear_env_values();
return 0;
diff --git a/board/mpl/common/common_util.h b/board/mpl/common/common_util.h
index d4b1f68..46573da 100644
--- a/board/mpl/common/common_util.h
+++ b/board/mpl/common/common_util.h
@@ -26,7 +26,7 @@
typedef struct {
char signature[4];
- char serial_name[17]; /* "MIP405_1000xxxxx" */
+ char serial_name[17]; /* "MIP405_1000xxxxx" */
char eth_addr[21]; /* "00:60:C2:0a:00:00" */
} backup_t;
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index 6f53192..a437dab 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -398,7 +398,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
return (0); /* no or unknown flash */
}
value = addr2[1]; /* device ID */
- /* printf("Device value %x\n",value); */
+ /* printf("Device value %x\n",value); */
switch (value) {
case (FLASH_WORD_SIZE)AMD_ID_F040B:
info->flash_id += FLASH_AM040;
diff --git a/board/mpl/common/kbd.c b/board/mpl/common/kbd.c
index 7724e24..931ed43 100644
--- a/board/mpl/common/kbd.c
+++ b/board/mpl/common/kbd.c
@@ -53,63 +53,63 @@ void enable_8259A_irq(unsigned int irq);
#define KBD_STAT_KOBF 0x01
#define KBD_STAT_IBF 0x02
#define KBD_STAT_SYS 0x04
-#define KBD_STAT_CD 0x08
+#define KBD_STAT_CD 0x08
#define KBD_STAT_LOCK 0x10
#define KBD_STAT_MOBF 0x20
-#define KBD_STAT_TI_OUT 0x40
-#define KBD_STAT_PARERR 0x80
+#define KBD_STAT_TI_OUT 0x40
+#define KBD_STAT_PARERR 0x80
-#define KBD_INIT_TIMEOUT 1000 /* Timeout in ms for initializing the keyboard */
-#define KBC_TIMEOUT 250 /* Timeout in ms for sending to keyboard controller */
-#define KBD_TIMEOUT 2000 /* Timeout in ms for keyboard command acknowledge */
+#define KBD_INIT_TIMEOUT 1000 /* Timeout in ms for initializing the keyboard */
+#define KBC_TIMEOUT 250 /* Timeout in ms for sending to keyboard controller */
+#define KBD_TIMEOUT 2000 /* Timeout in ms for keyboard command acknowledge */
/*
* Keyboard Controller Commands
*/
-#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
-#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
-#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */
+#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
+#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
+#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */
#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */
-#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */
-#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */
-#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */
-#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */
-#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */
-#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */
+#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */
+#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */
+#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */
+#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */
+#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */
+#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */
#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if
initiated by the auxiliary device */
-#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
+#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
/*
* Keyboard Commands
*/
-#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
-#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
-#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
-#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */
-#define KBD_CMD_RESET 0xFF /* Reset */
+#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
+#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
+#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
+#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */
+#define KBD_CMD_RESET 0xFF /* Reset */
/*
* Keyboard Replies
*/
-#define KBD_REPLY_POR 0xAA /* Power on reset */
-#define KBD_REPLY_ACK 0xFA /* Command ACK */
-#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */
+#define KBD_REPLY_POR 0xAA /* Power on reset */
+#define KBD_REPLY_ACK 0xFA /* Command ACK */
+#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */
/*
* Status Register Bits
*/
-#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
-#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
-#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
-#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
-#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
-#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
-#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
-#define KBD_STAT_PERR 0x80 /* Parity error */
+#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
+#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
+#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
+#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
+#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
+#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
+#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
+#define KBD_STAT_PERR 0x80 /* Parity error */
#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
@@ -117,24 +117,24 @@ void enable_8259A_irq(unsigned int irq);
* Controller Mode Register Bits
*/
-#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
-#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
-#define KBD_MODE_SYS 0x04 /* The system flag (?) */
-#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
-#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
+#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
+#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
+#define KBD_MODE_SYS 0x04 /* The system flag (?) */
+#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
+#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */
-#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
-#define KBD_MODE_RFU 0x80
+#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
+#define KBD_MODE_RFU 0x80
-#define KDB_DATA_PORT 0x60
+#define KDB_DATA_PORT 0x60
#define KDB_COMMAND_PORT 0x64
-#define LED_SCR 0x01 /* scroll lock led */
-#define LED_CAP 0x04 /* caps lock led */
-#define LED_NUM 0x02 /* num lock led */
+#define LED_SCR 0x01 /* scroll lock led */
+#define LED_CAP 0x04 /* caps lock led */
+#define LED_NUM 0x02 /* num lock led */
-#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */
+#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */
static volatile char kbd_buffer[KBD_BUFFER_LEN];
@@ -197,8 +197,7 @@ int isa_kbd_init(void)
irq_install_handler(25, (interrupt_handler_t *)handle_isa_int, NULL);
isa_irq_install_handler(KBD_INTERRUPT, (interrupt_handler_t *)kbd_interrupt, NULL);
return (1);
- }
- else {
+ } else {
printf("%s\n",result);
return (-1);
}
@@ -216,20 +215,20 @@ int overwrite_console (void)
int drv_isa_kbd_init (void)
{
int error;
- device_t kbddev ;
+ device_t kbddev ;
char *stdinname = getenv ("stdin");
if(isa_kbd_init()==-1)
return -1;
- memset (&kbddev, 0, sizeof(kbddev));
- strcpy(kbddev.name, DEVNAME);
- kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
- kbddev.putc = NULL ;
+ memset (&kbddev, 0, sizeof(kbddev));
+ strcpy(kbddev.name, DEVNAME);
+ kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+ kbddev.putc = NULL ;
kbddev.puts = NULL ;
kbddev.getc = kbd_getc ;
kbddev.tstc = kbd_testc ;
- error = device_register (&kbddev);
+ error = device_register (&kbddev);
if(error==0) {
/* check if this is the standard input device */
if(strcmp(stdinname,DEVNAME)==0) {
@@ -313,106 +312,106 @@ void kbd_set_leds(void)
}
-void handle_keyboard_event(unsigned char scancode)
+void handle_keyboard_event (unsigned char scancode)
{
unsigned char keycode;
/* Convert scancode to keycode */
- PRINTF("scancode %x\n",scancode);
- if(scancode==0xe0) {
- e0=1; /* special charakters */
+ PRINTF ("scancode %x\n", scancode);
+ if (scancode == 0xe0) {
+ e0 = 1; /* special charakters */
return;
}
- if(e0==1) {
- e0=0; /* delete flag */
- if(!( ((scancode&0x7F)==0x38)|| /* the right ctrl key */
- ((scancode&0x7F)==0x1D)|| /* the right alt key */
- ((scancode&0x7F)==0x35)|| /* the right '/' key */
- ((scancode&0x7F)==0x1C) )) /* the right enter key */
+ if (e0 == 1) {
+ e0 = 0; /* delete flag */
+ if (!(((scancode & 0x7F) == 0x38) || /* the right ctrl key */
+ ((scancode & 0x7F) == 0x1D) || /* the right alt key */
+ ((scancode & 0x7F) == 0x35) || /* the right '/' key */
+ ((scancode & 0x7F) == 0x1C)))
+ /* the right enter key */
/* we swallow unknown e0 codes */
return;
}
/* special cntrl keys */
- switch(scancode)
- {
- case 0x2A:
- case 0x36: /* shift pressed */
- shift=1;
- return; /* do nothing else */
- case 0xAA:
- case 0xB6: /* shift released */
- shift=0;
- return; /* do nothing else */
- case 0x38: /* alt pressed */
- alt=1;
- return; /* do nothing else */
- case 0xB8: /* alt released */
- alt=0;
- return; /* do nothing else */
- case 0x1d: /* ctrl pressed */
- ctrl=1;
- return; /* do nothing else */
- case 0x9d: /* ctrl released */
- ctrl=0;
- return; /* do nothing else */
- case 0x46: /* scrollock pressed */
- scroll_lock=~scroll_lock;
- kbd_set_leds();
- return; /* do nothing else */
- case 0x3A: /* capslock pressed */
- caps_lock=~caps_lock;
- kbd_set_leds();
- return;
- case 0x45: /* numlock pressed */
- num_lock=~num_lock;
- kbd_set_leds();
- return;
- case 0xC6: /* scroll lock released */
- case 0xC5: /* num lock released */
- case 0xBA: /* caps lock released */
- return; /* just swallow */
+ switch (scancode) {
+ case 0x2A:
+ case 0x36: /* shift pressed */
+ shift = 1;
+ return; /* do nothing else */
+ case 0xAA:
+ case 0xB6: /* shift released */
+ shift = 0;
+ return; /* do nothing else */
+ case 0x38: /* alt pressed */
+ alt = 1;
+ return; /* do nothing else */
+ case 0xB8: /* alt released */
+ alt = 0;
+ return; /* do nothing else */
+ case 0x1d: /* ctrl pressed */
+ ctrl = 1;
+ return; /* do nothing else */
+ case 0x9d: /* ctrl released */
+ ctrl = 0;
+ return; /* do nothing else */
+ case 0x46: /* scrollock pressed */
+ scroll_lock = ~scroll_lock;
+ kbd_set_leds ();
+ return; /* do nothing else */
+ case 0x3A: /* capslock pressed */
+ caps_lock = ~caps_lock;
+ kbd_set_leds ();
+ return;
+ case 0x45: /* numlock pressed */
+ num_lock = ~num_lock;
+ kbd_set_leds ();
+ return;
+ case 0xC6: /* scroll lock released */
+ case 0xC5: /* num lock released */
+ case 0xBA: /* caps lock released */
+ return; /* just swallow */
}
- if((scancode&0x80)==0x80) /* key released */
+ if ((scancode & 0x80) == 0x80) /* key released */
return;
/* now, decide which table we need */
- if(scancode > (sizeof(kbd_plain_xlate)/sizeof(kbd_plain_xlate[0]))) { /* scancode not in list */
- PRINTF("unkown scancode %X\n",scancode);
- return; /* swallow it */
+ if (scancode > (sizeof (kbd_plain_xlate) / sizeof (kbd_plain_xlate[0]))) { /* scancode not in list */
+ PRINTF ("unkown scancode %X\n", scancode);
+ return; /* swallow it */
}
/* setup plain code first */
- keycode=kbd_plain_xlate[scancode];
- if(caps_lock==1) { /* caps_lock is pressed, overwrite plain code */
- if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */
- PRINTF("unkown caps-locked scancode %X\n",scancode);
- return; /* swallow it */
+ keycode = kbd_plain_xlate[scancode];
+ if (caps_lock == 1) { /* caps_lock is pressed, overwrite plain code */
+ if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) { /* scancode not in list */
+ PRINTF ("unkown caps-locked scancode %X\n", scancode);
+ return; /* swallow it */
}
- keycode=kbd_shift_xlate[scancode];
- if(keycode<'A') { /* we only want the alphas capital */
- keycode=kbd_plain_xlate[scancode];
+ keycode = kbd_shift_xlate[scancode];
+ if (keycode < 'A') { /* we only want the alphas capital */
+ keycode = kbd_plain_xlate[scancode];
}
}
- if(shift==1) { /* shift overwrites caps_lock */
- if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */
- PRINTF("unkown shifted scancode %X\n",scancode);
- return; /* swallow it */
+ if (shift == 1) { /* shift overwrites caps_lock */
+ if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) { /* scancode not in list */
+ PRINTF ("unkown shifted scancode %X\n", scancode);
+ return; /* swallow it */
}
- keycode=kbd_shift_xlate[scancode];
+ keycode = kbd_shift_xlate[scancode];
}
- if(ctrl==1) { /* ctrl overwrites caps_lock and shift */
- if(scancode > (sizeof(kbd_ctrl_xlate)/sizeof(kbd_ctrl_xlate[0]))) { /* scancode not in list */
- PRINTF("unkown ctrl scancode %X\n",scancode);
- return; /* swallow it */
+ if (ctrl == 1) { /* ctrl overwrites caps_lock and shift */
+ if (scancode > (sizeof (kbd_ctrl_xlate) / sizeof (kbd_ctrl_xlate[0]))) { /* scancode not in list */
+ PRINTF ("unkown ctrl scancode %X\n", scancode);
+ return; /* swallow it */
}
- keycode=kbd_ctrl_xlate[scancode];
+ keycode = kbd_ctrl_xlate[scancode];
}
/* check if valid keycode */
- if(keycode==0xff) {
- PRINTF("unkown scancode %X\n",scancode);
- return; /* swallow unknown codes */
+ if (keycode == 0xff) {
+ PRINTF ("unkown scancode %X\n", scancode);
+ return; /* swallow unknown codes */
}
- kbd_put_queue(keycode);
- PRINTF("%x\n",keycode);
+ kbd_put_queue (keycode);
+ PRINTF ("%x\n", keycode);
}
/*
@@ -583,8 +582,7 @@ char * kbd_initialize(void)
status = kbd_wait_for_input();
if (status == KBD_REPLY_ACK)
break;
- if (status != KBD_REPLY_RESEND)
- {
+ if (status != KBD_REPLY_RESEND) {
PRINTF("status: %X\n",status);
return "Kbd: reset failed, no ACK";
}
diff --git a/board/mpl/common/memtst.c b/board/mpl/common/memtst.c
index 1d28513..1393ea1 100644
--- a/board/mpl/common/memtst.c
+++ b/board/mpl/common/memtst.c
@@ -55,9 +55,9 @@ DECLARE_GLOBAL_DATA_PTR;
#define FALSE 0
#define TRUE 1
-#define TEST_QUIET 8
-#define TEST_SHOW_PROG 4
-#define TEST_SHOW_ERR 2
+#define TEST_QUIET 8
+#define TEST_SHOW_PROG 4
+#define TEST_SHOW_ERR 2
#define TEST_SHOW_ALL 1
#define TESTPAT1 0xAA55AA55
@@ -473,19 +473,19 @@ void mem_test_reloc(void)
unsigned long addr;
int i;
for (i=0; i< TEST_STAGES; i++) {
- addr = (ulong) (test_stage[i].test_write) + gd->reloc_off;
+ addr = (ulong) (test_stage[i].test_write) + gd->reloc_off;
test_stage[i].test_write=
(void (*) (unsigned long startaddr, unsigned long size,
unsigned long *pat))addr;
- addr = (ulong) (test_stage[i].test_write_desc) + gd->reloc_off;
+ addr = (ulong) (test_stage[i].test_write_desc) + gd->reloc_off;
test_stage[i].test_write_desc=(char *)addr;
- if(test_stage[i].test_check1) {
+ if(test_stage[i].test_check1) {
addr = (ulong) (test_stage[i].test_check1) + gd->reloc_off;
test_stage[i].test_check1=
(void *(*) (int mode, unsigned long startaddr,
unsigned long size, unsigned long *pat))addr;
}
- if(test_stage[i].test_check2) {
+ if(test_stage[i].test_check2) {
addr = (ulong) (test_stage[i].test_check2) + gd->reloc_off;
test_stage[i].test_check2=
(void *(*) (int mode, unsigned long startaddr,
diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c
index bde14be..bfd6428 100644
--- a/board/mpl/common/pci.c
+++ b/board/mpl/common/pci.c
@@ -97,7 +97,7 @@ static void reloc_pci_cfg_table(struct pci_config_table *table)
unsigned long addr;
for (; table && table->vendor; table++) {
- addr = (ulong) (table->config_device) + gd->reloc_off;
+ addr = (ulong) (table->config_device) + gd->reloc_off;
#ifdef DEBUG
printf ("device \"%d\": 0x%08lx => 0x%08lx\n",
table->device, (ulong) (table->config_device), addr);
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
index 60008e2..7bca961 100644
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -80,9 +80,9 @@
*/
struct pci_pip405_config_entry {
- int index; /* address */
- unsigned long val; /* value */
- int width; /* data size */
+ int index; /* address */
+ unsigned long val; /* value */
+ int width; /* data size */
};
extern void pci_pip405_write_regs(struct pci_controller *,
@@ -95,37 +95,37 @@ static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = {
{PCI_CFG_PIIX4_GENCFG, 0x00018041, 4}, /* enable SERIRQs, ISA, PNP, GPI11 */
{PCI_CFG_PIIX4_TOM, 0xFE, 1}, /* Top of Memory */
{PCI_CFG_PIIX4_XBCS, 0x02C4, 2}, /* disable all peri CS */
- {PCI_CFG_PIIX4_RTCCFG, 0x21, 1}, /* enable RTC */
+ {PCI_CFG_PIIX4_RTCCFG, 0x21, 1}, /* enable RTC */
#if defined(CONFIG_PIP405)
- {PCI_CFG_PIIX4_MBDMA, 0x82, 1}, /* set MBDMA0 to DMA 2 */
- {PCI_CFG_PIIX4_MBDMA+1, 0x83, 1}, /* set MBDMA1 to DMA 3 */
+ {PCI_CFG_PIIX4_MBDMA, 0x82, 1}, /* set MBDMA0 to DMA 2 */
+ {PCI_CFG_PIIX4_MBDMA+1, 0x83, 1}, /* set MBDMA1 to DMA 3 */
#endif
{PCI_CFG_PIIX4_DLC, 0x0, 1}, /* disable passive release feature */
- { } /* end of device table */
+ { } /* end of device table */
};
/* PIIX4 IDE Controller Function 1 */
static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
{PCI_CFG_PIIX4_BMIBA, 0x0001000, 4}, /* set BMI to a valid address */
- {PCI_COMMAND, 0x0001, 2}, /* enable IO access */
+ {PCI_COMMAND, 0x0001, 2}, /* enable IO access */
#if !defined(CONFIG_MIP405T)
{PCI_CFG_PIIX4_IDETIM, 0x80008000, 4}, /* enable Both IDE channels */
#else
{PCI_CFG_PIIX4_IDETIM, 0x00008000, 4}, /* enable IDE channel0 */
#endif
- { } /* end of device table */
+ { } /* end of device table */
};
/* PIIX4 USB Controller Function 2 */
static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {
#if !defined(CONFIG_MIP405T)
- {PCI_INTERRUPT_LINE, 31, 1}, /* Int vector = 31 */
+ {PCI_INTERRUPT_LINE, 31, 1}, /* Int vector = 31 */
{PCI_BASE_ADDRESS_4, 0x0000E001, 4}, /* Set IO Address to 0xe000 to 0xe01F */
- {PCI_LATENCY_TIMER, 0x80, 1}, /* Latency Timer 0x80 */
- {0xC0, 0x2000, 2}, /* Legacy support */
+ {PCI_LATENCY_TIMER, 0x80, 1}, /* Latency Timer 0x80 */
+ {0xC0, 0x2000, 2}, /* Legacy support */
{PCI_COMMAND, 0x0005, 2}, /* enable IO access and Master */
#endif
- { } /* end of device table */
+ { } /* end of device table */
};
/* PIIX4 Power Management Function 3 */
@@ -133,12 +133,12 @@ static struct pci_pip405_config_entry piix4_pmm_cntrl_f3[] = {
{PCI_CFG_PIIX4_PMBA, 0x00004000, 4}, /* set PMBA to "valid" value */
{PCI_CFG_PIIX4_SMBBA, 0x00005000, 4}, /* set SMBBA to "valid" value */
{PCI_CFG_PIIX4_PMMISC, 0x01, 1}, /* enable PMBA IO access */
- {PCI_COMMAND, 0x0001, 2}, /* enable IO access */
- { } /* end of device table */
+ {PCI_COMMAND, 0x0001, 2}, /* enable IO access */
+ { } /* end of device table */
};
/* PPC405 Dummy only used to prevent autosetup on this host bridge */
static struct pci_pip405_config_entry ppc405_dummy[] = {
- { } /* end of device table */
+ { } /* end of device table */
};
void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
@@ -146,13 +146,13 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
static struct pci_config_table pci_pip405_config_table[]={
- {PCI_VENDOR_ID_IBM, /* 405 dummy */
+ {PCI_VENDOR_ID_IBM, /* 405 dummy */
PCI_DEVICE_ID_IBM_405GP,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID, 0,
pci_pip405_write_regs, {(unsigned long) ppc405_dummy}},
- {PCI_VENDOR_ID_INTEL, /* PIIX4 ISA Bridge Function 0 */
+ {PCI_VENDOR_ID_INTEL, /* PIIX4 ISA Bridge Function 0 */
PCI_DEVICE_ID_INTEL_82371AB_0,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID, 0,
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
index 84c91c4..6778e40 100644
--- a/board/mpl/common/usb_uhci.c
+++ b/board/mpl/common/usb_uhci.c
@@ -540,7 +540,7 @@ void usb_check_int_chain(void)
link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
td=(uhci_td_t *)link; /* assign it */
/* all interrupt TDs are finally linked to the td_int[0].
- * so we process all until we find the td_int[0].
+ * so we process all until we find the td_int[0].
* if int0 chain points to a QH, we're also done
*/
while(((i>0) && (link != (unsigned long)&td_int[0])) ||
diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c
index 6fbc585..6ad95b5 100644
--- a/board/mpl/mip405/cmd_mip405.c
+++ b/board/mpl/mip405/cmd_mip405.c
@@ -38,19 +38,19 @@ extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
int do_mip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- ulong led_on;
+ ulong led_on;
if (strcmp(argv[1], "info") == 0)
{
print_mip405_info();
- return 0;
- }
- if (strcmp(argv[1], "led") == 0)
+ return 0;
+ }
+ if (strcmp(argv[1], "led") == 0)
{
led_on = (ulong)simple_strtoul(argv[2], NULL, 10);
user_led0(led_on);
return 0;
- }
+ }
return (do_mplcommon(cmdtp, flag, argc, argv));
}
U_BOOT_CMD(
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 4b1c1c0..9e8f9bb 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -89,12 +89,12 @@ extern ldiv_t ldiv (long int __numer, long int __denom);
#endif
-#define PLD_PART_REG PER_PLD_ADDR + 0
-#define PLD_VERS_REG PER_PLD_ADDR + 1
-#define PLD_BOARD_CFG_REG PER_PLD_ADDR + 2
-#define PLD_IRQ_REG PER_PLD_ADDR + 3
-#define PLD_COM_MODE_REG PER_PLD_ADDR + 4
-#define PLD_EXT_CONF_REG PER_PLD_ADDR + 5
+#define PLD_PART_REG PER_PLD_ADDR + 0
+#define PLD_VERS_REG PER_PLD_ADDR + 1
+#define PLD_BOARD_CFG_REG PER_PLD_ADDR + 2
+#define PLD_IRQ_REG PER_PLD_ADDR + 3
+#define PLD_COM_MODE_REG PER_PLD_ADDR + 4
+#define PLD_EXT_CONF_REG PER_PLD_ADDR + 5
#define MEGA_BYTE (1024*1024)
diff --git a/board/mpl/mip405/mip405.h b/board/mpl/mip405/mip405.h
index b1d91de..fd7e78a 100644
--- a/board/mpl/mip405/mip405.h
+++ b/board/mpl/mip405/mip405.h
@@ -35,7 +35,7 @@ void user_led0(unsigned char on);
#endif
/* timings */
/* PLD (CS7) */
-#define PLD_BME 0 /* Burst disable */
+#define PLD_BME 0 /* Burst disable */
#define PLD_TWE 5 /* 5 * 30ns 120ns Waitstates (access=TWT+1+TH) */
#define PLD_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
#define PLD_OEN 1 /* Cycles from CS low to OE low */
@@ -46,7 +46,7 @@ void user_led0(unsigned char on);
#define PLD_SOR 1 /* Sample on Ready disabled */
#define PLD_BEM 0 /* Byte Write only active on Write cycles */
#define PLD_PEN 0 /* Parity disable */
-#define PLD_AP ((PLD_BME << 31) + (PLD_TWE << 23) + (PLD_CSN << 18) + (PLD_OEN << 16) + (PLD_WBN << 14) + \
+#define PLD_AP ((PLD_BME << 31) + (PLD_TWE << 23) + (PLD_CSN << 18) + (PLD_OEN << 16) + (PLD_WBN << 14) + \
(PLD_WBF << 12) + (PLD_TH << 9) + (PLD_RE << 8) + (PLD_SOR << 7) + (PLD_BEM << 6) + (PLD_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
@@ -62,7 +62,7 @@ void user_led0(unsigned char on);
#define PER_BOARD_ADDR (PER_UART1_ADDR+(1024*1024))
/* Dummy CS to get the board revision */
-#define BOARD_BME 0 /* Burst disable */
+#define BOARD_BME 0 /* Burst disable */
#define BOARD_TWE 255 /* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */
#define BOARD_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
#define BOARD_OEN 1 /* Cycles from CS low to OE low */
@@ -73,7 +73,7 @@ void user_led0(unsigned char on);
#define BOARD_SOR 1 /* Sample on Ready disabled */
#define BOARD_BEM 0 /* Byte Write only active on Write cycles */
#define BOARD_PEN 0 /* Parity disable */
-#define BOARD_AP ((BOARD_BME << 31) + (BOARD_TWE << 23) + (BOARD_CSN << 18) + (BOARD_OEN << 16) + (BOARD_WBN << 14) + \
+#define BOARD_AP ((BOARD_BME << 31) + (BOARD_TWE << 23) + (BOARD_CSN << 18) + (BOARD_OEN << 16) + (BOARD_WBN << 14) + \
(BOARD_WBF << 12) + (BOARD_TH << 9) + (BOARD_RE << 8) + (BOARD_SOR << 7) + (BOARD_BEM << 6) + (BOARD_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
@@ -86,7 +86,7 @@ void user_led0(unsigned char on);
/* UART0 CS2 */
-#define UART0_BME 0 /* Burst disable */
+#define UART0_BME 0 /* Burst disable */
#define UART0_TWE 7 /* 7 * 30ns 210ns Waitstates (access=TWT+1+TH) */
#define UART0_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
#define UART0_OEN 1 /* Cycles from CS low to OE low */
@@ -97,7 +97,7 @@ void user_led0(unsigned char on);
#define UART0_SOR 1 /* Sample on Ready disabled */
#define UART0_BEM 0 /* Byte Write only active on Write cycles */
#define UART0_PEN 0 /* Parity disable */
-#define UART0_AP ((UART0_BME << 31) + (UART0_TWE << 23) + (UART0_CSN << 18) + (UART0_OEN << 16) + (UART0_WBN << 14) + \
+#define UART0_AP ((UART0_BME << 31) + (UART0_TWE << 23) + (UART0_CSN << 18) + (UART0_OEN << 16) + (UART0_WBN << 14) + \
(UART0_WBF << 12) + (UART0_TH << 9) + (UART0_RE << 8) + (UART0_SOR << 7) + (UART0_BEM << 6) + (UART0_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
@@ -115,10 +115,10 @@ void user_led0(unsigned char on);
/* Flash CS0 or CS 1 */
/* 0x7F8FFE80 slowest timing at all... */
-#define FLASH_BME_B 1 /* Burst enable */
+#define FLASH_BME_B 1 /* Burst enable */
#define FLASH_FWT_B 0x6 /* 6 * 30ns 210ns First Wait Access */
#define FLASH_BWT_B 0x6 /* 6 * 30ns 210ns Burst Wait Access */
-#define FLASH_BME 0 /* Burst disable */
+#define FLASH_BME 0 /* Burst disable */
#define FLASH_TWE 0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
#define FLASH_CSN 0 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
#define FLASH_OEN 1 /* Cycles from CS low to OE low */
@@ -130,10 +130,10 @@ void user_led0(unsigned char on);
#define FLASH_BEM 0 /* Byte Write only active on Write cycles */
#define FLASH_PEN 0 /* Parity disable */
/* Access Parameter Register for non Boot */
-#define FLASH_AP ((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
+#define FLASH_AP ((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
/* Access Parameter Register for Boot */
-#define FLASH_AP_B ((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
+#define FLASH_AP_B ((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
@@ -149,10 +149,10 @@ void user_led0(unsigned char on);
/* MPS CS1 or CS0 */
/* Boot CS: */
-#define MPS_BME_B 1 /* Burst enable */
+#define MPS_BME_B 1 /* Burst enable */
#define MPS_FWT_B 0x6/* 6 * 30ns 210ns First Wait Access */
#define MPS_BWT_B 0x6 /* 6 * 30ns 210ns Burst Wait Access */
-#define MPS_BME 0 /* Burst disable */
+#define MPS_BME 0 /* Burst disable */
#define MPS_TWE 0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
#define MPS_CSN 0 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
#define MPS_OEN 1 /* Cycles from CS low to OE low */
@@ -164,10 +164,10 @@ void user_led0(unsigned char on);
#define MPS_BEM 0 /* Byte Write only active on Write cycles */
#define MPS_PEN 0 /* Parity disable */
/* Access Parameter Register for non Boot */
-#define MPS_AP ((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
+#define MPS_AP ((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
/* Access Parameter Register for Boot */
-#define MPS_AP_B ((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
+#define MPS_AP_B ((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
diff --git a/board/mpl/mip405/u-boot.lds b/board/mpl/mip405/u-boot.lds
index ffdf467..7932b9f 100644
--- a/board/mpl/mip405/u-boot.lds
+++ b/board/mpl/mip405/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
index 98429c0..91683a3 100644
--- a/board/mpl/pati/cmd_pati.c
+++ b/board/mpl/pati/cmd_pati.c
@@ -360,12 +360,12 @@ int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (strcmp(argv[1], "info") == 0)
{
show_pld_regs();
- return 0;
+ return 0;
}
if (strcmp(argv[1], "pci") == 0)
{
display_pci_regs();
- return 0;
+ return 0;
}
if (strcmp(argv[1], "led") == 0)
{
@@ -377,7 +377,7 @@ int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
user_led1(led_on);
return 0;
- }
+ }
#if defined(CFG_PCI_CON_DEVICE)
if (strcmp(argv[1], "con") == 0) {
pci_con_connect();
diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
index 0355b65..7893d61 100644
--- a/board/mpl/pati/pati.c
+++ b/board/mpl/pati/pati.c
@@ -484,7 +484,7 @@ int pci_con_getc(void)
else
diff=r_ptr-w_ptr;
if((diff<(REC_BUFFER_SIZE-4)) && buff_full) {
- /* clear Mail box */
+ /* clear Mail box */
buff_full=0;
PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
}
diff --git a/board/mpl/pati/pati.h b/board/mpl/pati/pati.h
index d521772..86c7a41 100644
--- a/board/mpl/pati/pati.h
+++ b/board/mpl/pati/pati.h
@@ -89,7 +89,7 @@
#define SDRAM_CAL 9
#define SDRAM_RCD 10
#define SDRAM_WREQ 11
-#define SDRAM_PR 12
+#define SDRAM_PR 12
#define SDRAM_RC 13
#define SDRAM_LMR 14
#define SDRAM_IIP 19
@@ -128,7 +128,7 @@
#define SDRAM_MUX0 9
#define SDRAM_MUX1 10
#define SDRAM_PDIS 11
-#define SDRAM_RES1 12
+#define SDRAM_RES1 12
#define SDRAM_RES2 13
#define SDRAM_RES3 14
#define SDRAM_RES4 19
@@ -177,7 +177,7 @@
#define SDRAM_RES5 9
#define SDRAM_CFG1 10
#define SDRAM_CFG2 11
-#define SDRAM_CFG3 12
+#define SDRAM_CFG3 12
#define SDRAM_RES6 13
#define SDRAM_CFG5 14
#define SDRAM_CFG6 19
@@ -214,7 +214,7 @@
* MISC Defines
***************************************************************/
-#define PCI_VENDOR_ID_MPL 0x18E6
+#define PCI_VENDOR_ID_MPL 0x18E6
#define PCI_DEVICE_ID_PATI 0x00DA
#if defined(CONFIG_MIP405)
@@ -269,12 +269,12 @@
/* Config Area */
#define PATI_LOC_CFG_ADDR 0x07000000 /* Local Address */
-#define PATI_LOC_CFG_MASK 0xFFFFFF00 /* 256 Bytes */
+#define PATI_LOC_CFG_MASK 0xFFFFFF00 /* 256 Bytes */
/* Attributes */
-#define PATI_LOC_CFG_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
-#define PATI_LOC_CFG_BURST 0 /* No Burst */
-#define PATI_LOC_CFG_NO_PREFETCH 1 /* No Prefetch */
-#define PATI_LOC_CFG_TA_ENABLE 1 /* Enable TA */
+#define PATI_LOC_CFG_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
+#define PATI_LOC_CFG_BURST 0 /* No Burst */
+#define PATI_LOC_CFG_NO_PREFETCH 1 /* No Prefetch */
+#define PATI_LOC_CFG_TA_ENABLE 1 /* Enable TA */
#define PATI_LOC_CFG_SPACE0_ATTR ( \
PATI_LOC_CFG_BUS_SIZE | \
@@ -295,10 +295,10 @@
#define PATI_LOC_SDRAM_ADDR 0x06000000 /* Local Address */
#define PATI_LOC_SDRAM_MASK 0xFFF00000 /* 1MByte */
/* Attributes */
-#define PATI_LOC_SDRAM_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
-#define PATI_LOC_SDRAM_BURST 0 /* No Burst */
-#define PATI_LOC_SDRAM_NO_PREFETCH 0 /* Prefetch */
-#define PATI_LOC_SDRAM_TA_ENABLE 1 /* Enable TA */
+#define PATI_LOC_SDRAM_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
+#define PATI_LOC_SDRAM_BURST 0 /* No Burst */
+#define PATI_LOC_SDRAM_NO_PREFETCH 0 /* Prefetch */
+#define PATI_LOC_SDRAM_TA_ENABLE 1 /* Enable TA */
/* should never be used */
#define PATI_LOC_SDRAM_SPACE0_ATTR ( \
@@ -319,10 +319,10 @@
#define PATI_LOC_FLASH_ADDR 0x03000000 /* Local Address */
#define PATI_LOC_FLASH_MASK 0xFFF00000 /* 1MByte */
/* Attributes */
-#define PATI_LOC_FLASH_BUS_SIZE PATI_BUS_SIZE_16 /* 16 Bit */
-#define PATI_LOC_FLASH_BURST 0 /* No Burst */
-#define PATI_LOC_FLASH_NO_PREFETCH 1 /* No Prefetch */
-#define PATI_LOC_FLASH_TA_ENABLE 1 /* Enable TA */
+#define PATI_LOC_FLASH_BUS_SIZE PATI_BUS_SIZE_16 /* 16 Bit */
+#define PATI_LOC_FLASH_BURST 0 /* No Burst */
+#define PATI_LOC_FLASH_NO_PREFETCH 1 /* No Prefetch */
+#define PATI_LOC_FLASH_TA_ENABLE 1 /* Enable TA */
/* should never be used */
#define PATI_LOC_FLASH_SPACE0_ATTR ( \
@@ -343,7 +343,7 @@
#define PATI_LOC_CPU_ADDR 0x01000000 /* Local Address */
#define PATI_LOC_CPU_MASK 0xFFF00000 /* 1Mbyte */
/* Attributes */
-#define PATI_LOC_CPU_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
+#define PATI_LOC_CPU_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
#define PATI_LOC_CPU_BURST 0 /* No Burst */
#define PATI_LOC_CPU_NO_PREFETCH 1 /* No Prefetch */
#define PATI_LOC_CPU_TA_ENABLE 1 /* Enable TA */
@@ -393,9 +393,9 @@
#define PATI_HW_START ((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF))
-#define PATI_HW_PCI_ONLY ((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
+#define PATI_HW_PCI_ONLY ((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
#define PATI_HW_CPU_ACC ((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
-#define PATI_HW_CPU_SLAVE ((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY | LOCAL_CPU_SLAVE))
+#define PATI_HW_CPU_SLAVE ((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY | LOCAL_CPU_SLAVE))
/***************************************************
* Direct Master Config
@@ -404,12 +404,12 @@
#define PATI_BUS_MASTER 1
-#define PATI_DMASTER_MASK 0xFFF00000 /* 1MByte */
-#define PATI_DMASTER_ADDR 0x01000000 /* Local Address */
+#define PATI_DMASTER_MASK 0xFFF00000 /* 1MByte */
+#define PATI_DMASTER_ADDR 0x01000000 /* Local Address */
-#define PATI_DMASTER_MEMORY_EN 0x00000001 /* 0x00000001 */
-#define PATI_DMASTER_READ_AHEAD 0x00000004 /* 0x00000004 */
-#define PATI_DMASTER_READ_NOT_AHEAD 0x00000000 /* 0x00000004 */
+#define PATI_DMASTER_MEMORY_EN 0x00000001 /* 0x00000001 */
+#define PATI_DMASTER_READ_AHEAD 0x00000004 /* 0x00000004 */
+#define PATI_DMASTER_READ_NOT_AHEAD 0x00000000 /* 0x00000004 */
#define PATI_DMASTER_PRE_SIZE_CNTRL_0 0x00000000
#define PATI_DMASTER_PRE_SIZE_CNTRL_4 0x00000008
#define PATI_DMASTER_PRE_SIZE_CNTRL_8 0x00001000
diff --git a/board/mpl/pati/pci_eeprom.h b/board/mpl/pati/pci_eeprom.h
index 9658808..af34b86 100644
--- a/board/mpl/pati/pci_eeprom.h
+++ b/board/mpl/pati/pci_eeprom.h
@@ -35,57 +35,57 @@ typedef struct pci_eeprom_t {
} pci_eeprom;
static pci_eeprom pati_eeprom[] = {
- { 0x00,PCI_DEVICE_ID_PATI }, /* PCI Device ID PCIIDR[31:16] */
- { 0x02,PCI_VENDOR_ID_MPL }, /* PCI Vendor ID PCIIDR[15:0] */
- { 0x04,PCI_CLASS_PROCESSOR_POWERPC }, /* PCI Class Code PCICCR[23:8] */
- { 0x06,0x00BA }, /* PCI Class Code / PCI Revision ID PCICCR[7:0] / PCIREV[7:0] */
- { 0x08,0x0007 }, /* PCI Maximum Latency / PCI Minimum Grant PCIMLR[7:0] / PCIMGR[7:0] */
- { 0x0A,0x0100 }, /* PCI Interrupt Pin / PCI Interrupt Line PCIIPR[7:0] / PCIILR[7:0] */
- { 0x0C,0x0000 }, /* MSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[31:16] */
- { 0x0E,0x0000 }, /* LSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[15:0] */
- { 0x10,0x0000 }, /* MSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[31:16] */
- { 0x12,0x0000 }, /* LSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[15:0] */
- { 0x14,HIGH_WORD(PATI_LOC_CFG_MASK) }, /* MSW of Direct Slave Local Address Space 0 Range LAS0RR[31:16] */
- { 0x16,LOW_WORD(PATI_LOC_CFG_MASK) }, /* LSW of Direct Slave Local Address Space 0 Range LAS0RR[15:0] */
- { 0x18,HIGH_WORD(PATI_LOC_CFG_ADDR) }, /* MSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[31:16] (CFG) */
- { 0x1A,LOW_WORD(PATI_LOC_CFG_ADDR)|1 }, /* LSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[15:2, 0], Reserved [1] */
- { 0x1C,0x0000 }, /* MSW of Mode/DMA Arbitration MARBR[31, 29:16] or DMAARB[31, 29:16], Reserved [30] */
- { 0x1E,0x0000 }, /* LSW of Mode/DMA Arbitration MARBR[15:0] or DMAARB[15:0] */
- { 0x20,0x0030 }, /* Local Miscellaneous Control 2 / Serial EEPROM WP Addr Boundary LMISC2[5:0], Res[7:6] / PROT_AREA[6:0], Res[7] */
- { 0x22,0x0510 }, /* Local Miscellaneous Control 1 / Local Bus Big/Little Endian Descriptor LMISC1[7:0] / BIGEND[7:0] */
- { 0x24,0x0000 }, /* MSW of Direct Slave Expansion ROM Range EROMRR[31:16] */
- { 0x26,0x0000 }, /* LSW of Direct Slave Expansion ROM Range EROMRR[15:11, 0], Reserved [10:1] */
- { 0x28,0x0000 }, /* MSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[31:16] */
- { 0x2A,0x0000 }, /* LSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[15:11, 5:0], Reserved [10:6] */
- { 0x2C,(0x4243 | HIGH_WORD((PATI_LOC_CFG_SPACE0_ATTR))) }, /* MSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[31:16] */
- { 0x2E,LOW_WORD(PATI_LOC_CFG_SPACE0_ATTR) }, /* LSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[15:0] */
- { 0x30,HIGH_WORD(PATI_DMASTER_MASK) }, /* MSW of Local Range for Direct Master-to-PCI DMRR[31:16] */
- { 0x32,LOW_WORD(PATI_DMASTER_MASK) }, /* LSW of Local Range for Direct Master-to-PCI (Reserved) DMRR[15:0] */
- { 0x34,HIGH_WORD(PATI_DMASTER_ADDR) }, /* MSW of Local Base Address for Direct Master-to-PCI Memory DMLBAM[31:16] */
- { 0x36,LOW_WORD(PATI_DMASTER_ADDR) }, /* LSW of Local Base Address for Direct Master-to-PCI Memory (Reserved) DMLBAM[15:0] */
- { 0x38,0x0000 }, /* MSW of Local Bus Address for Direct Master-to-PCI I/O Configuration DMLBAI[31:16] */
- { 0x3A,0x0000 }, /* LSW of Local Bus Address for Direct Master-to-PCI I/O Configuration (Reserved) DMLBAI[15:0] */
- { 0x3C,0x0000 }, /* MSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[31:16] */
- { 0x3E,0x0000 }, /* LSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[15:0] */
- { 0x40,0x0000 }, /* MSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[31, 23:16] Reserved [30:24]*/
- { 0x42,0x0000 }, /* LSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[15:0] */
- { 0x44,0x0000 }, /* PCI Subsystem ID PCISID[15:0] */
- { 0x46,0x0000 }, /* PCI Subsystem Vendor ID PCISVID[15:0] */
- { 0x48,HIGH_WORD(PATI_LOC_SDRAM_MASK) }, /* MSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[31:16] */
- { 0x4A,LOW_WORD(PATI_LOC_SDRAM_MASK) }, /* LSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[15:0] */
- { 0x4C,HIGH_WORD(PATI_LOC_SDRAM_ADDR) }, /* MSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[31:16] (SDRAM) */
- { 0x4E,LOW_WORD(PATI_LOC_SDRAM_ADDR) | 0x1 }, /* LSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[15:2, 0], Reserved [1] */
- { 0x50,HIGH_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, /* MSW of Local Address Space 1 Bus Region Descriptor LBRD1[31:16] */
- { 0x52,LOW_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, /* LSW of Local Address Space 1 Bus Region Descriptor (Reserved) LBRD1[15:0] */
- { 0x54,0x0000 }, /* Hot Swap Control/Status (Reserved) Reserved */
- { 0x56,0x0000 }, /* Hot Swap Next Capability Pointer / Hot Swap Control HS_NEXT[7:0] / HS_CNTL[7:0] */
- { 0x58,0x0000 }, /* Reserved Reserved */
- { 0x5A,0x0000 }, /* PCI Arbiter Control PCIARB[3:0], Reserved [15:4] */
- { 0x5C,0x0000 }, /* Power Management Capabilities PMC[15:9, 2:0] */
- { 0x5E,0x0000 }, /* Power Management Next Capability Pointer (Reserved) / Power Management Capability ID (Reserved) Reserved*/
- { 0x60,0x0000 }, /* Power Management Data / PMCSR Bridge Support Extension (Reserved) PMDATA[7:0] / Reserved */
- { 0x62,0x0000 }, /* Power Management Control/Status PMCSR[14:8] */
- { 0xFFFF,0xFFFF} /* terminaror */
+ { 0x00,PCI_DEVICE_ID_PATI }, /* PCI Device ID PCIIDR[31:16] */
+ { 0x02,PCI_VENDOR_ID_MPL }, /* PCI Vendor ID PCIIDR[15:0] */
+ { 0x04,PCI_CLASS_PROCESSOR_POWERPC }, /* PCI Class Code PCICCR[23:8] */
+ { 0x06,0x00BA }, /* PCI Class Code / PCI Revision ID PCICCR[7:0] / PCIREV[7:0] */
+ { 0x08,0x0007 }, /* PCI Maximum Latency / PCI Minimum Grant PCIMLR[7:0] / PCIMGR[7:0] */
+ { 0x0A,0x0100 }, /* PCI Interrupt Pin / PCI Interrupt Line PCIIPR[7:0] / PCIILR[7:0] */
+ { 0x0C,0x0000 }, /* MSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[31:16] */
+ { 0x0E,0x0000 }, /* LSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[15:0] */
+ { 0x10,0x0000 }, /* MSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[31:16] */
+ { 0x12,0x0000 }, /* LSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[15:0] */
+ { 0x14,HIGH_WORD(PATI_LOC_CFG_MASK) }, /* MSW of Direct Slave Local Address Space 0 Range LAS0RR[31:16] */
+ { 0x16,LOW_WORD(PATI_LOC_CFG_MASK) }, /* LSW of Direct Slave Local Address Space 0 Range LAS0RR[15:0] */
+ { 0x18,HIGH_WORD(PATI_LOC_CFG_ADDR) }, /* MSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[31:16] (CFG) */
+ { 0x1A,LOW_WORD(PATI_LOC_CFG_ADDR)|1 }, /* LSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[15:2, 0], Reserved [1] */
+ { 0x1C,0x0000 }, /* MSW of Mode/DMA Arbitration MARBR[31, 29:16] or DMAARB[31, 29:16], Reserved [30] */
+ { 0x1E,0x0000 }, /* LSW of Mode/DMA Arbitration MARBR[15:0] or DMAARB[15:0] */
+ { 0x20,0x0030 }, /* Local Miscellaneous Control 2 / Serial EEPROM WP Addr Boundary LMISC2[5:0], Res[7:6] / PROT_AREA[6:0], Res[7] */
+ { 0x22,0x0510 }, /* Local Miscellaneous Control 1 / Local Bus Big/Little Endian Descriptor LMISC1[7:0] / BIGEND[7:0] */
+ { 0x24,0x0000 }, /* MSW of Direct Slave Expansion ROM Range EROMRR[31:16] */
+ { 0x26,0x0000 }, /* LSW of Direct Slave Expansion ROM Range EROMRR[15:11, 0], Reserved [10:1] */
+ { 0x28,0x0000 }, /* MSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[31:16] */
+ { 0x2A,0x0000 }, /* LSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[15:11, 5:0], Reserved [10:6] */
+ { 0x2C,(0x4243 | HIGH_WORD((PATI_LOC_CFG_SPACE0_ATTR))) }, /* MSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[31:16] */
+ { 0x2E,LOW_WORD(PATI_LOC_CFG_SPACE0_ATTR) }, /* LSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[15:0] */
+ { 0x30,HIGH_WORD(PATI_DMASTER_MASK) }, /* MSW of Local Range for Direct Master-to-PCI DMRR[31:16] */
+ { 0x32,LOW_WORD(PATI_DMASTER_MASK) }, /* LSW of Local Range for Direct Master-to-PCI (Reserved) DMRR[15:0] */
+ { 0x34,HIGH_WORD(PATI_DMASTER_ADDR) }, /* MSW of Local Base Address for Direct Master-to-PCI Memory DMLBAM[31:16] */
+ { 0x36,LOW_WORD(PATI_DMASTER_ADDR) }, /* LSW of Local Base Address for Direct Master-to-PCI Memory (Reserved) DMLBAM[15:0] */
+ { 0x38,0x0000 }, /* MSW of Local Bus Address for Direct Master-to-PCI I/O Configuration DMLBAI[31:16] */
+ { 0x3A,0x0000 }, /* LSW of Local Bus Address for Direct Master-to-PCI I/O Configuration (Reserved) DMLBAI[15:0] */
+ { 0x3C,0x0000 }, /* MSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[31:16] */
+ { 0x3E,0x0000 }, /* LSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[15:0] */
+ { 0x40,0x0000 }, /* MSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[31, 23:16] Reserved [30:24]*/
+ { 0x42,0x0000 }, /* LSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[15:0] */
+ { 0x44,0x0000 }, /* PCI Subsystem ID PCISID[15:0] */
+ { 0x46,0x0000 }, /* PCI Subsystem Vendor ID PCISVID[15:0] */
+ { 0x48,HIGH_WORD(PATI_LOC_SDRAM_MASK) }, /* MSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[31:16] */
+ { 0x4A,LOW_WORD(PATI_LOC_SDRAM_MASK) }, /* LSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[15:0] */
+ { 0x4C,HIGH_WORD(PATI_LOC_SDRAM_ADDR) }, /* MSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[31:16] (SDRAM) */
+ { 0x4E,LOW_WORD(PATI_LOC_SDRAM_ADDR) | 0x1 }, /* LSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[15:2, 0], Reserved [1] */
+ { 0x50,HIGH_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, /* MSW of Local Address Space 1 Bus Region Descriptor LBRD1[31:16] */
+ { 0x52,LOW_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, /* LSW of Local Address Space 1 Bus Region Descriptor (Reserved) LBRD1[15:0] */
+ { 0x54,0x0000 }, /* Hot Swap Control/Status (Reserved) Reserved */
+ { 0x56,0x0000 }, /* Hot Swap Next Capability Pointer / Hot Swap Control HS_NEXT[7:0] / HS_CNTL[7:0] */
+ { 0x58,0x0000 }, /* Reserved Reserved */
+ { 0x5A,0x0000 }, /* PCI Arbiter Control PCIARB[3:0], Reserved [15:4] */
+ { 0x5C,0x0000 }, /* Power Management Capabilities PMC[15:9, 2:0] */
+ { 0x5E,0x0000 }, /* Power Management Next Capability Pointer (Reserved) / Power Management Capability ID (Reserved) Reserved*/
+ { 0x60,0x0000 }, /* Power Management Data / PMCSR Bridge Support Extension (Reserved) PMDATA[7:0] / Reserved */
+ { 0x62,0x0000 }, /* Power Management Control/Status PMCSR[14:8] */
+ { 0xFFFF,0xFFFF} /* terminaror */
};
#define PATI_EEPROM_LAST_OFFSET 0x64
#endif /* #ifndef __PCI_EEPROM_H_ */
diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c
index 1bf4d7b..945e5c9 100644
--- a/board/mpl/pip405/cmd_pip405.c
+++ b/board/mpl/pip405/cmd_pip405.c
@@ -38,14 +38,14 @@ extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
int do_pip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- ulong led_on,led_nr;
+ ulong led_on,led_nr;
if (strcmp(argv[1], "info") == 0)
{
print_pip405_info();
- return 0;
- }
- if (strcmp(argv[1], "led") == 0)
+ return 0;
+ }
+ if (strcmp(argv[1], "led") == 0)
{
led_nr = (ulong)simple_strtoul(argv[2], NULL, 10);
led_on = (ulong)simple_strtoul(argv[3], NULL, 10);
@@ -54,7 +54,7 @@ int do_pip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
user_led1(led_on);
return 0;
- }
+ }
return (do_mplcommon(cmdtp, flag, argc, argv));
}
diff --git a/board/mpl/pip405/pip405.h b/board/mpl/pip405/pip405.h
index b41c5bb..5815786 100644
--- a/board/mpl/pip405/pip405.h
+++ b/board/mpl/pip405/pip405.h
@@ -56,7 +56,7 @@ void user_led1(unsigned char on);
/* timings */
/* CS Config register (CS7) */
-#define CONFIG_PORT_BME 0 /* Burst disable */
+#define CONFIG_PORT_BME 0 /* Burst disable */
#define CONFIG_PORT_TWE 255 /* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */
#define CONFIG_PORT_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
#define CONFIG_PORT_OEN 1 /* Cycles from CS low to OE low */
@@ -67,7 +67,7 @@ void user_led1(unsigned char on);
#define CONFIG_PORT_SOR 1 /* Sample on Ready disabled */
#define CONFIG_PORT_BEM 0 /* Byte Write only active on Write cycles */
#define CONFIG_PORT_PEN 0 /* Parity disable */
-#define CONFIG_PORT_AP ((CONFIG_PORT_BME << 31) + (CONFIG_PORT_TWE << 23) + (CONFIG_PORT_CSN << 18) + (CONFIG_PORT_OEN << 16) + (CONFIG_PORT_WBN << 14) + \
+#define CONFIG_PORT_AP ((CONFIG_PORT_BME << 31) + (CONFIG_PORT_TWE << 23) + (CONFIG_PORT_CSN << 18) + (CONFIG_PORT_OEN << 16) + (CONFIG_PORT_WBN << 14) + \
(CONFIG_PORT_WBF << 12) + (CONFIG_PORT_TH << 9) + (CONFIG_PORT_RE << 8) + (CONFIG_PORT_SOR << 7) + (CONFIG_PORT_BEM << 6) + (CONFIG_PORT_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
@@ -80,10 +80,10 @@ void user_led1(unsigned char on);
/* Flash CS0 or CS 1 */
/* 0x7F8FFE80 slowest timing at all... */
-#define FLASH_BME_B 1 /* Burst enable */
+#define FLASH_BME_B 1 /* Burst enable */
#define FLASH_FWT_B 0x6 /* 6 * 30ns 210ns First Wait Access */
#define FLASH_BWT_B 0x6 /* 6 * 30ns 210ns Burst Wait Access */
-#define FLASH_BME 0 /* Burst disable */
+#define FLASH_BME 0 /* Burst disable */
#define FLASH_TWE 0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
#define FLASH_CSN 0 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
#define FLASH_OEN 1 /* Cycles from CS low to OE low */
@@ -95,10 +95,10 @@ void user_led1(unsigned char on);
#define FLASH_BEM 0 /* Byte Write only active on Write cycles */
#define FLASH_PEN 0 /* Parity disable */
/* Access Parameter Register for non Boot */
-#define FLASH_AP ((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
+#define FLASH_AP ((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
/* Access Parameter Register for Boot */
-#define FLASH_AP_B ((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
+#define FLASH_AP_B ((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \
(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
@@ -114,10 +114,10 @@ void user_led1(unsigned char on);
/* MPS CS1 or CS0 */
/* Boot CS: */
-#define MPS_BME_B 1 /* Burst enable */
+#define MPS_BME_B 1 /* Burst enable */
#define MPS_FWT_B 0x6/* 6 * 30ns 210ns First Wait Access */
#define MPS_BWT_B 0x6 /* 6 * 30ns 210ns Burst Wait Access */
-#define MPS_BME 0 /* Burst disable */
+#define MPS_BME 0 /* Burst disable */
#define MPS_TWE 0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */
#define MPS_CSN 0 /* Chipselect is driven inactive for 1 Cycle BTW transfers */
#define MPS_OEN 1 /* Cycles from CS low to OE low */
@@ -129,10 +129,10 @@ void user_led1(unsigned char on);
#define MPS_BEM 0 /* Byte Write only active on Write cycles */
#define MPS_PEN 0 /* Parity disable */
/* Access Parameter Register for non Boot */
-#define MPS_AP ((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
+#define MPS_AP ((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
/* Access Parameter Register for Boot */
-#define MPS_AP_B ((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
+#define MPS_AP_B ((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \
(MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5))
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
diff --git a/board/mpl/pip405/u-boot.lds b/board/mpl/pip405/u-boot.lds
index c7ae4d0..fb71064 100644
--- a/board/mpl/pip405/u-boot.lds
+++ b/board/mpl/pip405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug
index 88dcaf9..0552994 100644
--- a/board/mpl/pip405/u-boot.lds.debug
+++ b/board/mpl/pip405/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index 90a1b08..d3629c5 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -58,8 +58,8 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (strcmp(argv[1], "info") == 0)
{
print_vcma9_info();
- return 0;
- }
+ return 0;
+ }
#if defined(CONFIG_DRIVER_CS8900)
if (strcmp(argv[1], "cs8900") == 0) {
if (strcmp(argv[2], "read") == 0) {
diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S
index a023353..e3af073 100644
--- a/board/mpl/vcma9/lowlevel_init.S
+++ b/board/mpl/vcma9/lowlevel_init.S
@@ -39,92 +39,92 @@
#define SDRAM_REG 0x2C000106
/* BWSCON */
-#define DW8 (0x0)
-#define DW16 (0x1)
-#define DW32 (0x2)
-#define WAIT (0x1<<2)
-#define UBLB (0x1<<3)
+#define DW8 (0x0)
+#define DW16 (0x1)
+#define DW32 (0x2)
+#define WAIT (0x1<<2)
+#define UBLB (0x1<<3)
/* BANKSIZE */
#define BURST_EN (0x1<<7)
-#define B1_BWSCON (DW16)
-#define B2_BWSCON (DW32)
-#define B3_BWSCON (DW32)
-#define B4_BWSCON (DW16 + WAIT + UBLB)
-#define B5_BWSCON (DW8 + UBLB)
-#define B6_BWSCON (DW32)
-#define B7_BWSCON (DW32)
+#define B1_BWSCON (DW16)
+#define B2_BWSCON (DW32)
+#define B3_BWSCON (DW32)
+#define B4_BWSCON (DW16 + WAIT + UBLB)
+#define B5_BWSCON (DW8 + UBLB)
+#define B6_BWSCON (DW32)
+#define B7_BWSCON (DW32)
/* BANK0CON */
-#define B0_Tacs 0x0 /* 0clk */
-#define B0_Tcos 0x1 /* 1clk */
+#define B0_Tacs 0x0 /* 0clk */
+#define B0_Tcos 0x1 /* 1clk */
/*#define B0_Tcos 0x0 0clk */
-#define B0_Tacc 0x7 /* 14clk */
+#define B0_Tacc 0x7 /* 14clk */
/*#define B0_Tacc 0x5 8clk */
-#define B0_Tcoh 0x0 /* 0clk */
-#define B0_Tah 0x0 /* 0clk */
-#define B0_Tacp 0x0 /* page mode is not used */
-#define B0_PMC 0x0 /* page mode disabled */
+#define B0_Tcoh 0x0 /* 0clk */
+#define B0_Tah 0x0 /* 0clk */
+#define B0_Tacp 0x0 /* page mode is not used */
+#define B0_PMC 0x0 /* page mode disabled */
/* BANK1CON */
-#define B1_Tacs 0x0 /* 0clk */
-#define B1_Tcos 0x1 /* 1clk */
+#define B1_Tacs 0x0 /* 0clk */
+#define B1_Tcos 0x1 /* 1clk */
/*#define B1_Tcos 0x0 0clk */
#define B1_Tacc 0x7 /* 14clk */
/*#define B1_Tacc 0x5 8clk */
-#define B1_Tcoh 0x0 /* 0clk */
-#define B1_Tah 0x0 /* 0clk */
-#define B1_Tacp 0x0 /* page mode is not used */
-#define B1_PMC 0x0 /* page mode disabled */
-
-#define B2_Tacs 0x3 /* 4clk */
-#define B2_Tcos 0x3 /* 4clk */
-#define B2_Tacc 0x7 /* 14clk */
-#define B2_Tcoh 0x3 /* 4clk */
-#define B2_Tah 0x3 /* 4clk */
-#define B2_Tacp 0x0 /* page mode is not used */
-#define B2_PMC 0x0 /* page mode disabled */
-
-#define B3_Tacs 0x3 /* 4clk */
-#define B3_Tcos 0x3 /* 4clk */
-#define B3_Tacc 0x7 /* 14clk */
-#define B3_Tcoh 0x3 /* 4clk */
-#define B3_Tah 0x3 /* 4clk */
-#define B3_Tacp 0x0 /* page mode is not used */
-#define B3_PMC 0x0 /* page mode disabled */
-
-#define B4_Tacs 0x3 /* 4clk */
-#define B4_Tcos 0x1 /* 1clk */
-#define B4_Tacc 0x7 /* 14clk */
-#define B4_Tcoh 0x1 /* 1clk */
-#define B4_Tah 0x0 /* 0clk */
-#define B4_Tacp 0x0 /* page mode is not used */
-#define B4_PMC 0x0 /* page mode disabled */
-
-#define B5_Tacs 0x0 /* 0clk */
-#define B5_Tcos 0x3 /* 4clk */
-#define B5_Tacc 0x5 /* 8clk */
-#define B5_Tcoh 0x2 /* 2clk */
-#define B5_Tah 0x1 /* 1clk */
-#define B5_Tacp 0x0 /* page mode is not used */
-#define B5_PMC 0x0 /* page mode disabled */
-
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1 /* 3clk */
-#define B6_SCAN 0x2 /* 10bit */
-
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x2 /* 10bit */
+#define B1_Tcoh 0x0 /* 0clk */
+#define B1_Tah 0x0 /* 0clk */
+#define B1_Tacp 0x0 /* page mode is not used */
+#define B1_PMC 0x0 /* page mode disabled */
+
+#define B2_Tacs 0x3 /* 4clk */
+#define B2_Tcos 0x3 /* 4clk */
+#define B2_Tacc 0x7 /* 14clk */
+#define B2_Tcoh 0x3 /* 4clk */
+#define B2_Tah 0x3 /* 4clk */
+#define B2_Tacp 0x0 /* page mode is not used */
+#define B2_PMC 0x0 /* page mode disabled */
+
+#define B3_Tacs 0x3 /* 4clk */
+#define B3_Tcos 0x3 /* 4clk */
+#define B3_Tacc 0x7 /* 14clk */
+#define B3_Tcoh 0x3 /* 4clk */
+#define B3_Tah 0x3 /* 4clk */
+#define B3_Tacp 0x0 /* page mode is not used */
+#define B3_PMC 0x0 /* page mode disabled */
+
+#define B4_Tacs 0x3 /* 4clk */
+#define B4_Tcos 0x1 /* 1clk */
+#define B4_Tacc 0x7 /* 14clk */
+#define B4_Tcoh 0x1 /* 1clk */
+#define B4_Tah 0x0 /* 0clk */
+#define B4_Tacp 0x0 /* page mode is not used */
+#define B4_PMC 0x0 /* page mode disabled */
+
+#define B5_Tacs 0x0 /* 0clk */
+#define B5_Tcos 0x3 /* 4clk */
+#define B5_Tacc 0x5 /* 8clk */
+#define B5_Tcoh 0x2 /* 2clk */
+#define B5_Tah 0x1 /* 1clk */
+#define B5_Tacp 0x0 /* page mode is not used */
+#define B5_PMC 0x0 /* page mode disabled */
+
+#define B6_MT 0x3 /* SDRAM */
+#define B6_Trcd 0x1 /* 3clk */
+#define B6_SCAN 0x2 /* 10bit */
+
+#define B7_MT 0x3 /* SDRAM */
+#define B7_Trcd 0x1 /* 3clk */
+#define B7_SCAN 0x2 /* 10bit */
/* REFRESH parameter */
-#define REFEN 0x1 /* Refresh enable */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-#define Trp 0x0 /* 2clk */
-#define Trc 0x3 /* 7clk */
-#define Tchr 0x2 /* 3clk */
-#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
+#define REFEN 0x1 /* Refresh enable */
+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
+#define Trp 0x0 /* 2clk */
+#define Trc 0x3 /* 7clk */
+#define Tchr 0x2 /* 3clk */
+#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
/**************************************/
_TEXT_BASE:
diff --git a/board/ms7722se/lowlevel_init.S b/board/ms7722se/lowlevel_init.S
index 2024e27..332f65a 100644
--- a/board/ms7722se/lowlevel_init.S
+++ b/board/ms7722se/lowlevel_init.S
@@ -114,11 +114,11 @@ bsc_init:
mov.w r0, @r1
mov.l CMNCR_A, r1 ! CMNCR address -> R1
- mov.l CMNCR_D, r0 ! CMNCR data -> R0
+ mov.l CMNCR_D, r0 ! CMNCR data -> R0
mov.l r0, @r1 ! CMNCR set
mov.l CS0BCR_A, r1 ! CS0BCR address -> R1
- mov.l CS0BCR_D, r0 ! CS0BCR data -> R0
+ mov.l CS0BCR_D, r0 ! CS0BCR data -> R0
mov.l r0, @r1 ! CS0BCR set
mov.l CS2BCR_A, r1 ! CS2BCR address -> R1
@@ -130,39 +130,39 @@ bsc_init:
mov.l r0, @r1 ! CS4BCR set
mov.l CS5ABCR_A, r1 ! CS5ABCR address -> R1
- mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0
+ mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0
mov.l r0, @r1 ! CS5ABCR set
mov.l CS5BBCR_A, r1 ! CS5BBCR address -> R1
- mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0
+ mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0
mov.l r0, @r1 ! CS5BBCR set
mov.l CS6ABCR_A, r1 ! CS6ABCR address -> R1
- mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0
+ mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0
mov.l r0, @r1 ! CS6ABCR set
mov.l CS0WCR_A, r1 ! CS0WCR address -> R1
- mov.l CS0WCR_D, r0 ! CS0WCR data -> R0
+ mov.l CS0WCR_D, r0 ! CS0WCR data -> R0
mov.l r0, @r1 ! CS0WCR set
mov.l CS2WCR_A, r1 ! CS2WCR address -> R1
- mov.l CS2WCR_D, r0 ! CS2WCR data -> R0
+ mov.l CS2WCR_D, r0 ! CS2WCR data -> R0
mov.l r0, @r1 ! CS2WCR set
mov.l CS4WCR_A, r1 ! CS4WCR address -> R1
- mov.l CS4WCR_D, r0 ! CS4WCR data -> R0
+ mov.l CS4WCR_D, r0 ! CS4WCR data -> R0
mov.l r0, @r1 ! CS4WCR set
mov.l CS5AWCR_A, r1 ! CS5AWCR address -> R1
- mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0
+ mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0
mov.l r0, @r1 ! CS5AWCR set
mov.l CS5BWCR_A, r1 ! CS5BWCR address -> R1
- mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0
+ mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0
mov.l r0, @r1 ! CS5BWCR set
mov.l CS6AWCR_A, r1 ! CS6AWCR address -> R1
- mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0
+ mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0
mov.l r0, @r1 ! CS6AWCR set
! SDRAM initialization
@@ -187,7 +187,7 @@ bsc_init:
mov.l r0, @r1 ! SB_RTCSR set
mov.l SDMR3_A, r1 ! SDMR3 address -> R1
- mov #0x00, r0 ! SDMR3 data -> R0
+ mov #0x00, r0 ! SDMR3 data -> R0
mov.b r0, @r1 ! SDMR3 set
! BL bit off (init = ON) (?!?)
diff --git a/board/munices/u-boot.lds b/board/munices/u-boot.lds
index 6fe615b..e9b3be8 100644
--- a/board/munices/u-boot.lds
+++ b/board/munices/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/musenki/musenki.c b/board/musenki/musenki.c
index 88ef83a..4408b07 100644
--- a/board/musenki/musenki.c
+++ b/board/musenki/musenki.c
@@ -35,7 +35,7 @@ int checkboard (void)
}
-#if 0 /* NOT USED */
+#if 0 /* NOT USED */
int checkflash (void)
{
/* TODO: XXX XXX XXX */
diff --git a/board/mvblue/flash.c b/board/mvblue/flash.c
index 8df573a..0c0738c 100644
--- a/board/mvblue/flash.c
+++ b/board/mvblue/flash.c
@@ -337,9 +337,9 @@ static ulong flash_get_size (vu_long *address, flash_info_t *info)
#define ERASE_DATA4 ERASE_DATA1
#define ERASE_DATA5 ERASE_DATA2
-#define ERASE_SECTOR_DATA (0x00300030 & FLASH_DATA_MASK)
-#define ERASE_CHIP_DATA (0x00100010 & FLASH_DATA_MASK)
-#define ERASE_CONFIRM_DATA (0x00800080 & FLASH_DATA_MASK)
+#define ERASE_SECTOR_DATA (0x00300030 & FLASH_DATA_MASK)
+#define ERASE_CHIP_DATA (0x00100010 & FLASH_DATA_MASK)
+#define ERASE_CONFIRM_DATA (0x00800080 & FLASH_DATA_MASK)
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
@@ -559,7 +559,7 @@ static int write_char (flash_info_t *info, ulong dest, uchar data)
return (1);
}
}
- mvdebug (("-write_byte\n"));
+ mvdebug (("-write_byte\n"));
return (0);
}
@@ -577,7 +577,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
mvdebug (("+write_word : 0x%08lx @ 0x%08lx\n", data, dest));
for ( i=0; (i < 4) && (result == 0); i++, dest+=1 )
result = write_char (info, dest, (data >> (8*(3-i))) & 0xff );
- mvdebug (("-write_word\n"));
+ mvdebug (("-write_word\n"));
return result;
}
/*---------------------------------------------------------------- */
diff --git a/board/mvs1/flash.c b/board/mvs1/flash.c
index 0845943..a52fe55 100644
--- a/board/mvs1/flash.c
+++ b/board/mvs1/flash.c
@@ -649,7 +649,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
}
}
- mvdebug (("-write_word\n"));
+ mvdebug (("-write_word\n"));
return (0);
}
#else /* CONFIG_MVS_16BIT_FLASH */
@@ -691,7 +691,7 @@ static int write_halfword (flash_info_t *info, ulong dest, ushort data)
return (1);
}
}
- mvdebug (("-write_halfword\n"));
+ mvdebug (("-write_halfword\n"));
return (0);
}
diff --git a/board/mvs1/u-boot.lds b/board/mvs1/u-boot.lds
index 76dfeba..55a9c3a 100644
--- a/board/mvs1/u-boot.lds
+++ b/board/mvs1/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mvs1/u-boot.lds.debug b/board/mvs1/u-boot.lds.debug
index 753411f..c33581d 100644
--- a/board/mvs1/u-boot.lds.debug
+++ b/board/mvs1/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/mx1ads/lowlevel_init.S b/board/mx1ads/lowlevel_init.S
index 09c260d..6967fb2 100644
--- a/board/mx1ads/lowlevel_init.S
+++ b/board/mx1ads/lowlevel_init.S
@@ -35,7 +35,7 @@ _TEXT_BASE:
.globl lowlevel_init
lowlevel_init:
-/* memory controller init */
+/* memory controller init */
ldr r1, =SDCTL0
@@ -50,7 +50,7 @@ lowlevel_init:
ldr r3, =0x8200000
ldr r2, [r3]
-/* Set AutoRefresh Command */
+/* Set AutoRefresh Command */
ldr r3, =0xA2120200
str r3, [r1]
@@ -65,17 +65,17 @@ lowlevel_init:
ldr r2, [r3]
ldr r2, [r3]
-/* Set Mode Register */
+/* Set Mode Register */
ldr r3, =0xB2120200
str r3, [r1]
/* Issue Mode Register Command */
- ldr r3, =0x08111800 /* Mode Register Value */
+ ldr r3, =0x08111800 /* Mode Register Value */
ldr r2, [r3]
/* Set Normal Mode */
ldr r3, =0x82124200
str r3, [r1]
-/* everything is fine now */
+/* everything is fine now */
mov pc, lr
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
index abf2fd5..ba152e2 100644
--- a/board/mx1ads/mx1ads.c
+++ b/board/mx1ads/mx1ads.c
@@ -85,8 +85,8 @@ int board_init (void)
GPCR = 0x000003AB; /* I/O pad driving strength */
- /* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */
-/* MX1_CS1L = 0x11110601; */
+ /* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */
+/* MX1_CS1L = 0x11110601; */
MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
index eb7fde5..fae9fbb 100644
--- a/board/mx1ads/syncflash.c
+++ b/board/mx1ads/syncflash.c
@@ -40,13 +40,13 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#define SYNCFLASH_A10 (0x00100000)
#define CMD_NORMAL (0x81020300) /* Normal Mode */
-#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */
-#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */
-#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */
-#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */
+#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */
+#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */
+#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */
+#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */
#define CMD_PROGRAM (CMD_NORMAL + 0x70000000)
-#define MODE_REG_VAL (CFG_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */
+#define MODE_REG_VAL (CFG_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */
/* LCR Command */
#define LCR_READSTATUS (0x0001C000) /* 0x70 */
@@ -55,22 +55,22 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */
#define LCR_SR_CLEAR (0x00014000) /* 0x50 */
-/* Get Status register */
+/* Get Status register */
u32 SF_SR(void) {
u32 tmp,tmp1;
reg_SFCTL = CMD_PROGRAM;
- tmp = __REG(CFG_FLASH_BASE);
+ tmp = __REG(CFG_FLASH_BASE);
reg_SFCTL = CMD_NORMAL;
- reg_SFCTL = CMD_LCR; /* Activate LCR Mode */
- tmp1 = __REG(CFG_FLASH_BASE + LCR_SR_CLEAR);
+ reg_SFCTL = CMD_LCR; /* Activate LCR Mode */
+ tmp1 = __REG(CFG_FLASH_BASE + LCR_SR_CLEAR);
return tmp;
}
-/* check if SyncFlash is ready */
+/* check if SyncFlash is ready */
u8 SF_Ready(void) {
u32 tmp;
@@ -84,19 +84,19 @@ u8 SF_Ready(void) {
printf ("SyncFlash Error code %08x\n",tmp);
};
- if (tmp == 0x00800080) /* Test Bit 7 of SR */
+ if (tmp == 0x00800080) /* Test Bit 7 of SR */
return 1;
else
return 0;
}
-/* Issue the precharge all command */
+/* Issue the precharge all command */
void SF_PrechargeAll(void) {
u32 tmp;
- reg_SFCTL = CMD_PREC; /* Set Precharge Command */
- tmp = __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
+ reg_SFCTL = CMD_PREC; /* Set Precharge Command */
+ tmp = __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
}
/* set SyncFlash to normal mode */
@@ -107,21 +107,21 @@ void SF_Normal(void) {
reg_SFCTL = CMD_NORMAL;
}
-/* Erase SyncFlash */
+/* Erase SyncFlash */
void SF_Erase(u32 RowAddress) {
u32 tmp;
reg_SFCTL = CMD_NORMAL;
- tmp = __REG(RowAddress);
+ tmp = __REG(RowAddress);
reg_SFCTL = CMD_PREC;
- tmp = __REG(RowAddress);
+ tmp = __REG(RowAddress);
- reg_SFCTL = CMD_LCR; /* Set LCR mode */
- __REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */
+ reg_SFCTL = CMD_LCR; /* Set LCR mode */
+ __REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */
- reg_SFCTL = CMD_NORMAL; /* return to Normal mode */
- __REG(RowAddress) = 0xD0D0D0D0; /* Confirm */
+ reg_SFCTL = CMD_NORMAL; /* return to Normal mode */
+ __REG(RowAddress) = 0xD0D0D0D0; /* Confirm */
while(!SF_Ready());
}
@@ -132,8 +132,8 @@ void SF_NvmodeErase(void) {
reg_SFCTL = CMD_LCR; /* Set to LCR mode */
__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */
- reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
- __REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */
+ reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
+ __REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */
while(!SF_Ready());
}
@@ -141,11 +141,11 @@ void SF_NvmodeErase(void) {
void SF_NvmodeWrite(void) {
SF_PrechargeAll();
- reg_SFCTL = CMD_LCR; /* Set to LCR mode */
+ reg_SFCTL = CMD_LCR; /* Set to LCR mode */
__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */
- reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
- __REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */
+ reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
+ __REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */
}
/****************************************************************************************/
@@ -156,19 +156,19 @@ ulong flash_init(void) {
/* Turn on CSD1 for negating RESETSF of SyncFLash */
- reg_SFCTL |= 0x80000000; /* enable CSD1 for SyncFlash */
+ reg_SFCTL |= 0x80000000; /* enable CSD1 for SyncFlash */
udelay(200);
- reg_SFCTL = CMD_LMR; /* Set Load Mode Register Command */
- tmp = __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */
+ reg_SFCTL = CMD_LMR; /* Set Load Mode Register Command */
+ tmp = __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */
SF_Normal();
i = 0;
- flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC;
+ flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC;
- flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
index 47885bc..73ce895 100644
--- a/board/mx1fs2/flash.c
+++ b/board/mx1fs2/flash.c
@@ -612,7 +612,7 @@ bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
* @param info:
* @param src: source of copy transaction
* @param addr: where to copy to
- * @param cnt: number of bytes to copy
+ * @param cnt: number of bytes to copy
*
* @return error code
*/
diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S
index 8211beb..4b2cb48 100644
--- a/board/mx1fs2/lowlevel_init.S
+++ b/board/mx1fs2/lowlevel_init.S
@@ -166,22 +166,22 @@ lowlevel_init:
ldr r1,=0x00221000 /* adr of SDCTRL0 */
ldr r0,=0x92120200
str r0,[r1,#0] /* put in precharge command mode */
- ldr r2,=0x08200000 /* adr for precharge cmd */
+ ldr r2,=0x08200000 /* adr for precharge cmd */
ldr r0,[r2,#0] /* precharge */
ldr r0,=0xA2120200
ldr r2,=0x08000000 /* start of SDRAM */
str r0,[r1,#0] /* put in auto-refresh mode */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
ldr r0,=0xB2120200
ldr r2,=0x08111800
str r0,[r1,#0] /* setup for mode register of SDRAM */
- ldr r0,[r2,#0] /* program mode register */
+ ldr r0,[r2,#0] /* program mode register */
ldr r0,=0x82124267
str r0,[r1,#0] /* back to normal operation */
diff --git a/board/nc650/u-boot.lds b/board/nc650/u-boot.lds
index 159224f..09a442a 100644
--- a/board/nc650/u-boot.lds
+++ b/board/nc650/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/nc650/u-boot.lds.debug b/board/nc650/u-boot.lds.debug
index 40e4bd0..079a55a 100644
--- a/board/nc650/u-boot.lds.debug
+++ b/board/nc650/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/netphone/netphone.c b/board/netphone/netphone.c
index ccc8b3e..1072b3f 100644
--- a/board/netphone/netphone.c
+++ b/board/netphone/netphone.c
@@ -691,7 +691,7 @@ int last_stage_init(void)
i = CFG_HZ * 2;
while (i > 0) {
- if (tstc()) {
+ if (tstc()) {
getc();
break;
}
diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds
index ea39cd9..271102b 100644
--- a/board/netphone/u-boot.lds
+++ b/board/netphone/u-boot.lds
@@ -33,10 +33,10 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
@@ -49,8 +49,8 @@ SECTIONS
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
- .plt : { *(.plt) }
- .text :
+ .plt : { *(.plt) }
+ .text :
{
cpu/mpc8xx/start.o (.text)
cpu/mpc8xx/traps.o (.text)
diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug
index 80bcbfc..5bf1a66 100644
--- a/board/netphone/u-boot.lds.debug
+++ b/board/netphone/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/netstal/hcu4/u-boot.lds b/board/netstal/hcu4/u-boot.lds
index ab0b18a..3bcfea2 100644
--- a/board/netstal/hcu4/u-boot.lds
+++ b/board/netstal/hcu4/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index 55e4cc6..4ecdb25 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -310,8 +310,8 @@ int misc_init_r(void)
if (mfspr(dbcr0) & 0x80000000) {
/* External debugger alive
* enable trace facilty for Lauterbach
- * CCR0[DTB]=0 Enable broadcast of trace information
- * SDR0_PFC0[TRE] Trace signals are enabled instead of
+ * CCR0[DTB]=0 Enable broadcast of trace information
+ * SDR0_PFC0[TRE] Trace signals are enabled instead of
* GPIO49-63
*/
mtspr(ccr0, mfspr(ccr0) &~ (CCR0_DTB));
diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S
index 188272e..d73c861 100644
--- a/board/netstal/hcu5/init.S
+++ b/board/netstal/hcu5/init.S
@@ -85,7 +85,7 @@ tlbtab:
/* TLB#9: */
tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
- /* CAN */
+ /* CAN */
/* TLB#10: */
tlbentry( CFG_CS_1, SZ_1K, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
@@ -96,7 +96,7 @@ tlbtab:
tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1,
AC_R|AC_W|AC_X|SA_G|SA_I )
- /* IMC-Fast 32 MB */
+ /* IMC-Fast 32 MB */
/* TLB#13: */
tlbentry( CFG_CS_3, SZ_16M, CFG_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB#14: */
diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds
index 6c0ebbb..c72e5ba 100644
--- a/board/netstal/hcu5/u-boot.lds
+++ b/board/netstal/hcu5/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/netstal/mcu25/u-boot.lds b/board/netstal/mcu25/u-boot.lds
index a9532c4..740bc9c 100644
--- a/board/netstal/mcu25/u-boot.lds
+++ b/board/netstal/mcu25/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S
index a74abf9..af35662 100644
--- a/board/netstar/crcek.S
+++ b/board/netstar/crcek.S
@@ -33,7 +33,7 @@
ldr r4, [r3, r4, lsl#2]
eor r0, r4, r0, lsr#8
subs r2, r2, #0x1
- bne 1b
+ bne 1b
eor r0, r0, r5
.endm
@@ -58,7 +58,7 @@
mov \reg, #0x100000
3:
subs \reg, \reg, #0x1
- bne 3b
+ bne 3b
.endm
.text
diff --git a/board/netstar/eeprom_start.S b/board/netstar/eeprom_start.S
index 75d9f05..1306485 100644
--- a/board/netstar/eeprom_start.S
+++ b/board/netstar/eeprom_start.S
@@ -29,7 +29,7 @@ _start: b eeprom
ldr r4, [r3, r4, lsl#2]
eor r0, r4, r0, lsr#8
subs r2, r2, #0x1
- bne 1b
+ bne 1b
eor r0, r0, r5
.endm
@@ -58,7 +58,7 @@ _start: b eeprom
mov \reg, #0x1000
3:
subs \reg, \reg, #0x1
- bne 3b
+ bne 3b
.endm
.text
diff --git a/board/netstar/setup.S b/board/netstar/setup.S
index 5dacc9c..3c2d467 100644
--- a/board/netstar/setup.S
+++ b/board/netstar/setup.S
@@ -277,7 +277,7 @@ ulocking:
mov r0, #0x4000
sdelay:
subs r0, r0, #0x1
- bne sdelay
+ bne sdelay
/* back to arch calling code */
mov pc, lr
diff --git a/board/netta/dsp.c b/board/netta/dsp.c
index 66e0b85..3739e16 100644
--- a/board/netta/dsp.c
+++ b/board/netta/dsp.c
@@ -1031,7 +1031,7 @@ const struct host_init hi_default = {
.clk_divider = {
[0] = 47, /* must be 2048Hz */
- [1] = 47,
+ [1] = 47,
},
.initmode = 1,
diff --git a/board/netta/pcmcia.c b/board/netta/pcmcia.c
index 86b3cfb..66e6e51 100644
--- a/board/netta/pcmcia.c
+++ b/board/netta/pcmcia.c
@@ -231,12 +231,12 @@ int pcmcia_hardware_enable(int slot)
(reg&PCMCIA_VS2(slot))?"n":"ff");
if ((pipr & mask) == mask) {
- set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */
- set_vccd(0, 0); set_vccd(1, 1); /* 5V on, 3V off */
+ set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */
+ set_vccd(0, 0); set_vccd(1, 1); /* 5V on, 3V off */
puts (" 5.0V card found: ");
} else {
- set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */
- set_vccd(0, 1); set_vccd(1, 0); /* 5V off, 3V on */
+ set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */
+ set_vccd(0, 1); set_vccd(1, 0); /* 5V off, 3V on */
puts (" 3.3V card found: ");
}
@@ -244,7 +244,7 @@ int pcmcia_hardware_enable(int slot)
for (i=0; i<5000; ++i) {
if (!get_oc()) {
printf (" *** Overcurrent - Safety shutdown ***\n");
- set_vccd(0, 0); set_vccd(1, 0); /* VAVPP => Hi-Z */
+ set_vccd(0, 0); set_vccd(1, 0); /* VAVPP => Hi-Z */
return (1);
}
udelay (100);
diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds
index ea39cd9..f560189 100644
--- a/board/netta/u-boot.lds
+++ b/board/netta/u-boot.lds
@@ -28,15 +28,15 @@ SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
+ .interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
@@ -49,8 +49,8 @@ SECTIONS
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
- .plt : { *(.plt) }
- .text :
+ .plt : { *(.plt) }
+ .text :
{
cpu/mpc8xx/start.o (.text)
cpu/mpc8xx/traps.o (.text)
diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug
index 80bcbfc..5bf1a66 100644
--- a/board/netta/u-boot.lds.debug
+++ b/board/netta/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds
index ea39cd9..f560189 100644
--- a/board/netta2/u-boot.lds
+++ b/board/netta2/u-boot.lds
@@ -28,15 +28,15 @@ SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
+ .interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
@@ -49,8 +49,8 @@ SECTIONS
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
- .plt : { *(.plt) }
- .text :
+ .plt : { *(.plt) }
+ .text :
{
cpu/mpc8xx/start.o (.text)
cpu/mpc8xx/traps.o (.text)
diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug
index 80bcbfc..5bf1a66 100644
--- a/board/netta2/u-boot.lds.debug
+++ b/board/netta2/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds
index 79399f8..b4f210e 100644
--- a/board/netvia/u-boot.lds
+++ b/board/netvia/u-boot.lds
@@ -28,15 +28,15 @@ SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
+ .interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
@@ -49,8 +49,8 @@ SECTIONS
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
- .plt : { *(.plt) }
- .text :
+ .plt : { *(.plt) }
+ .text :
{
cpu/mpc8xx/start.o (.text)
cpu/mpc8xx/traps.o (.text)
diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug
index dda52a9..1014ec6 100644
--- a/board/netvia/u-boot.lds.debug
+++ b/board/netvia/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c
index 1dd348a..fc46244 100644
--- a/board/ns9750dev/ns9750dev.c
+++ b/board/ns9750dev/ns9750dev.c
@@ -102,7 +102,7 @@ void flash__init (void)
/*************************************************************
Routine:ether__init
Description: take the Ethernet controller out of reset and wait
- for the EEPROM load to complete.
+ for the EEPROM load to complete.
*************************************************************/
void ether__init (void)
{
diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds
index 94ab745..85117aa 100644
--- a/board/nx823/u-boot.lds
+++ b/board/nx823/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug
index 1a25a98..85072fe 100644
--- a/board/nx823/u-boot.lds.debug
+++ b/board/nx823/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/omap1610inn/lowlevel_init.S b/board/omap1610inn/lowlevel_init.S
index cc8347f..e4ed9f3 100644
--- a/board/omap1610inn/lowlevel_init.S
+++ b/board/omap1610inn/lowlevel_init.S
@@ -58,7 +58,7 @@ lowlevel_init:
str r1, [r0]
/*------------------------------------------------------*
- * Set up ARM CLM registers (IDLECT2) *
+ * Set up ARM CLM registers (IDLECT2) *
*------------------------------------------------------*/
ldr r0, REG_ARM_IDLECT2
ldr r1, VAL_ARM_IDLECT2
@@ -123,7 +123,7 @@ lock_end:
/*------------------------------------------------------*
* Turn off the watchdog during init... *
- *------------------------------------------------------*/
+ *------------------------------------------------------*/
disable_wd:
ldr r0, REG_WATCHDOG
ldr r1, WATCHDOG_VAL1
@@ -156,13 +156,13 @@ watch2Wait:
* and branch to appropriate initialization code.
*/
/* Load physical SDRAM base. */
- mov r0, #0x10000000
+ mov r0, #0x10000000
/* Get current execution location. */
- mov r1, pc
+ mov r1, pc
/* Compare. */
- cmp r1, r0
+ cmp r1, r0
/* Skip over EMIF-fast initialization if running from SDRAM. */
- bge skip_sdram
+ bge skip_sdram
/*
* Delay for SDRAM initialization.
@@ -170,7 +170,7 @@ watch2Wait:
mov r3, #0x1800 /* value should be checked */
3:
subs r3, r3, #0x1 /* Decrement count */
- bne 3b
+ bne 3b
/*
@@ -270,7 +270,7 @@ common_tc:
#ifdef CONFIG_H2_OMAP1610
/* inserting additional 2 clock cycle hold time for LAN */
ldr r0, REG_TC_EMIFS_CS1_ADVANCED
- ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
+ ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
str r1, [r0]
#endif
/* Start MPU Timer 1 */
diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c
index 8dbe686..2e04ad4 100644
--- a/board/omap1610inn/omap1610innovator.c
+++ b/board/omap1610inn/omap1610innovator.c
@@ -116,7 +116,7 @@ void flash__init (void)
/*************************************************************
Routine:ether__init
Description: take the Ethernet controller out of reset and wait
- for the EEPROM load to complete.
+ for the EEPROM load to complete.
*************************************************************/
void ether__init (void)
{
@@ -162,7 +162,7 @@ int dram_init (void)
/******************************************************
Routine: set_muxconf_regs
Description: Setting up the configuration Mux registers
- specific to the hardware
+ specific to the hardware
*******************************************************/
void set_muxconf_regs (void)
{
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
index 62eb6e3..a3295fd 100644
--- a/board/omap2420h4/mem.c
+++ b/board/omap2420h4/mem.c
@@ -253,7 +253,7 @@ next_mem_type:
a = H4_242x_SDRC_ACTIM_CTRLA_0_ES1;
b = H4_242x_SDRC_ACTIM_CTRLB_0_ES1;
r = H4_242x_SDRC_RFR_CTRL_ES1;
- }
+ }
if (cs0) {
__raw_writel(a, SDRC_ACTIM_CTRLA_0);
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index 1b917b3..09b070d 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -152,7 +152,7 @@ void wait_for_command_complete(unsigned int wd_base)
/*******************************************************************
* Routine:ether_init
* Description: take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
+ * for the EEPROM load to complete.
******************************************************************/
void ether_init (void)
{
diff --git a/board/omap5912osk/lowlevel_init.S b/board/omap5912osk/lowlevel_init.S
index a1fa097..7bfdb26 100644
--- a/board/omap5912osk/lowlevel_init.S
+++ b/board/omap5912osk/lowlevel_init.S
@@ -125,7 +125,7 @@ lock_end:
/*------------------------------------------------------*
* Turn off the watchdog during init... *
- *------------------------------------------------------*/
+ *------------------------------------------------------*/
ldr r0, REG_WATCHDOG
ldr r1, WATCHDOG_VAL1
str r1, [r0]
@@ -191,7 +191,7 @@ skip_TMP_Patch:
mov r0, #0x1800 /* value should be checked */
3:
subs r0, r0, #0x1 /* Decrement count */
- bne 3b
+ bne 3b
/*
* Set SDRAM control values. Disable refresh before MRS command.
@@ -294,7 +294,7 @@ common_tc:
#ifdef CONFIG_H2_OMAP1610
/* inserting additional 2 clock cycle hold time for LAN */
ldr r0, REG_TC_EMIFS_CS1_ADVANCED
- ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
+ ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
str r1, [r0]
#endif
/* Start MPU Timer 1 */
diff --git a/board/omap730p2/lowlevel_init.S b/board/omap730p2/lowlevel_init.S
index 9ab71cf..d4e97a5 100644
--- a/board/omap730p2/lowlevel_init.S
+++ b/board/omap730p2/lowlevel_init.S
@@ -65,7 +65,7 @@ lowlevel_init:
str r1, [r0]
/*------------------------------------------------------*
- * Set up ARM CLM registers (IDLECT2) *
+ * Set up ARM CLM registers (IDLECT2) *
*------------------------------------------------------*/
ldr r0, REG_ARM_IDLECT2
ldr r1, VAL_ARM_IDLECT2
@@ -123,7 +123,7 @@ lock_end:
/*------------------------------------------------------*
* Turn off the watchdog during init... *
- *------------------------------------------------------*/
+ *------------------------------------------------------*/
ldr r0, REG_WATCHDOG
ldr r1, WATCHDOG_VAL1
str r1, [r0]
@@ -158,7 +158,7 @@ watch2Wait:
/* Compare. */
cmp r0, #0
/* Skip over EMIF-fast initialization if running from SDRAM. */
- bne skip_sdram
+ bne skip_sdram
/*
* Delay for SDRAM initialization.
@@ -166,7 +166,7 @@ watch2Wait:
mov r3, #0x1800 /* value should be checked */
3:
subs r3, r3, #0x1 /* Decrement count */
- bne 3b
+ bne 3b
ldr r0, REG_SDRAM_CONFIG
ldr r1, SDRAM_CONFIG_VAL
@@ -239,7 +239,7 @@ common_tc:
#ifdef CONFIG_P2_OMAP1610
/* inserting additional 2 clock cycle hold time for LAN */
ldr r0, REG_TC_EMIFS_CS1_ADVANCED
- ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
+ ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
str r1, [r0]
#endif
/* Start MPU Timer 1 */
diff --git a/board/oxc/flash.c b/board/oxc/flash.c
index 795b7cc..296c01d 100644
--- a/board/oxc/flash.c
+++ b/board/oxc/flash.c
@@ -163,7 +163,7 @@ static ulong flash_get_size (vu_char *addr, flash_info_t *info)
}
if (devid == FLASH_STM320DB) {
- /* MPC8240 can address maximum 2Mb of flash, that is why the MSB
+ /* MPC8240 can address maximum 2Mb of flash, that is why the MSB
* lead is grounded and we can access only 2 first Mb */
info->flash_id = vendor << 16 | devid;
info->sector_count = 32;
diff --git a/board/pcippc2/cpc710_init_ram.c b/board/pcippc2/cpc710_init_ram.c
index 57ed8f0..171f06c 100644
--- a/board/pcippc2/cpc710_init_ram.c
+++ b/board/pcippc2/cpc710_init_ram.c
@@ -28,227 +28,205 @@
#include "pcippc2.h"
#include "i2c.h"
-typedef struct cpc710_mem_org_s
-{
- u8 rows;
- u8 cols;
- u8 banks2;
- u8 org;
+typedef struct cpc710_mem_org_s {
+ u8 rows;
+ u8 cols;
+ u8 banks2;
+ u8 org;
} cpc710_mem_org_t;
-static int cpc710_compute_mcer (u32 * mcer,
- unsigned long *
- size,
- unsigned int sdram);
-static int cpc710_eeprom_checksum (unsigned int sdram);
-static u8 cpc710_eeprom_read (unsigned int sdram,
- unsigned int offset);
-
-static u32 cpc710_mcer_mem [] =
-{
- 0x000003f3, /* 18 lines, 4 Mb */
- 0x000003e3, /* 19 lines, 8 Mb */
- 0x000003c3, /* 20 lines, 16 Mb */
- 0x00000383, /* 21 lines, 32 Mb */
- 0x00000303, /* 22 lines, 64 Mb */
- 0x00000203, /* 23 lines, 128 Mb */
- 0x00000003, /* 24 lines, 256 Mb */
- 0x00000002, /* 25 lines, 512 Mb */
- 0x00000001 /* 26 lines, 1024 Mb */
+static int cpc710_compute_mcer (u32 * mcer,
+ unsigned long *size, unsigned int sdram);
+static int cpc710_eeprom_checksum (unsigned int sdram);
+static u8 cpc710_eeprom_read (unsigned int sdram, unsigned int offset);
+
+static u32 cpc710_mcer_mem[] = {
+ 0x000003f3, /* 18 lines, 4 Mb */
+ 0x000003e3, /* 19 lines, 8 Mb */
+ 0x000003c3, /* 20 lines, 16 Mb */
+ 0x00000383, /* 21 lines, 32 Mb */
+ 0x00000303, /* 22 lines, 64 Mb */
+ 0x00000203, /* 23 lines, 128 Mb */
+ 0x00000003, /* 24 lines, 256 Mb */
+ 0x00000002, /* 25 lines, 512 Mb */
+ 0x00000001 /* 26 lines, 1024 Mb */
};
-static cpc710_mem_org_t cpc710_mem_org [] =
-{
- { 0x0c, 0x09, 0x02, 0x00 }, /* 0000: 12/ 9/2 */
- { 0x0d, 0x09, 0x02, 0x00 }, /* 0000: 13/ 9/2 */
- { 0x0d, 0x0a, 0x02, 0x00 }, /* 0000: 13/10/2 */
- { 0x0d, 0x0b, 0x02, 0x00 }, /* 0000: 13/11/2 */
- { 0x0d, 0x0c, 0x02, 0x00 }, /* 0000: 13/12/2 */
- { 0x0e, 0x0c, 0x02, 0x00 }, /* 0000: 14/12/2 */
- { 0x0b, 0x08, 0x02, 0x01 }, /* 0001: 11/ 8/2 */
- { 0x0b, 0x09, 0x01, 0x02 }, /* 0010: 11/ 9/1 */
- { 0x0b, 0x0a, 0x01, 0x03 }, /* 0011: 11/10/1 */
- { 0x0c, 0x08, 0x02, 0x04 }, /* 0100: 12/ 8/2 */
- { 0x0c, 0x0a, 0x02, 0x05 }, /* 0101: 12/10/2 */
- { 0x0d, 0x08, 0x01, 0x06 }, /* 0110: 13/ 8/1 */
- { 0x0d, 0x08, 0x02, 0x07 }, /* 0111: 13/ 8/2 */
- { 0x0d, 0x09, 0x01, 0x08 }, /* 1000: 13/ 9/1 */
- { 0x0d, 0x0a, 0x01, 0x09 }, /* 1001: 13/10/1 */
- { 0x0b, 0x08, 0x01, 0x0a }, /* 1010: 11/ 8/1 */
- { 0x0c, 0x08, 0x01, 0x0b }, /* 1011: 12/ 8/1 */
- { 0x0c, 0x09, 0x01, 0x0c }, /* 1100: 12/ 9/1 */
- { 0x0e, 0x09, 0x02, 0x0d }, /* 1101: 14/ 9/2 */
- { 0x0e, 0x0a, 0x02, 0x0e }, /* 1110: 14/10/2 */
- { 0x0e, 0x0b, 0x02, 0x0f } /* 1111: 14/11/2 */
+static cpc710_mem_org_t cpc710_mem_org[] = {
+ {0x0c, 0x09, 0x02, 0x00}, /* 0000: 12/ 9/2 */
+ {0x0d, 0x09, 0x02, 0x00}, /* 0000: 13/ 9/2 */
+ {0x0d, 0x0a, 0x02, 0x00}, /* 0000: 13/10/2 */
+ {0x0d, 0x0b, 0x02, 0x00}, /* 0000: 13/11/2 */
+ {0x0d, 0x0c, 0x02, 0x00}, /* 0000: 13/12/2 */
+ {0x0e, 0x0c, 0x02, 0x00}, /* 0000: 14/12/2 */
+ {0x0b, 0x08, 0x02, 0x01}, /* 0001: 11/ 8/2 */
+ {0x0b, 0x09, 0x01, 0x02}, /* 0010: 11/ 9/1 */
+ {0x0b, 0x0a, 0x01, 0x03}, /* 0011: 11/10/1 */
+ {0x0c, 0x08, 0x02, 0x04}, /* 0100: 12/ 8/2 */
+ {0x0c, 0x0a, 0x02, 0x05}, /* 0101: 12/10/2 */
+ {0x0d, 0x08, 0x01, 0x06}, /* 0110: 13/ 8/1 */
+ {0x0d, 0x08, 0x02, 0x07}, /* 0111: 13/ 8/2 */
+ {0x0d, 0x09, 0x01, 0x08}, /* 1000: 13/ 9/1 */
+ {0x0d, 0x0a, 0x01, 0x09}, /* 1001: 13/10/1 */
+ {0x0b, 0x08, 0x01, 0x0a}, /* 1010: 11/ 8/1 */
+ {0x0c, 0x08, 0x01, 0x0b}, /* 1011: 12/ 8/1 */
+ {0x0c, 0x09, 0x01, 0x0c}, /* 1100: 12/ 9/1 */
+ {0x0e, 0x09, 0x02, 0x0d}, /* 1101: 14/ 9/2 */
+ {0x0e, 0x0a, 0x02, 0x0e}, /* 1110: 14/10/2 */
+ {0x0e, 0x0b, 0x02, 0x0f} /* 1111: 14/11/2 */
};
unsigned long cpc710_ram_init (void)
{
- unsigned long memsize = 0;
- unsigned long bank_size;
- u32 mcer;
+ unsigned long memsize = 0;
+ unsigned long bank_size;
+ u32 mcer;
#ifndef CFG_RAMBOOT
- /* Clear memory banks
- */
- out32(REG(SDRAM0, MCER0), 0);
- out32(REG(SDRAM0, MCER1), 0);
- out32(REG(SDRAM0, MCER2), 0);
- out32(REG(SDRAM0, MCER3), 0);
- out32(REG(SDRAM0, MCER4), 0);
- out32(REG(SDRAM0, MCER5), 0);
- out32(REG(SDRAM0, MCER6), 0);
- out32(REG(SDRAM0, MCER7), 0);
- iobarrier_rw();
-
- /* Disable memory
- */
- out32(REG(SDRAM0,MCCR), 0x13b06000);
- iobarrier_rw();
+ /* Clear memory banks
+ */
+ out32 (REG (SDRAM0, MCER0), 0);
+ out32 (REG (SDRAM0, MCER1), 0);
+ out32 (REG (SDRAM0, MCER2), 0);
+ out32 (REG (SDRAM0, MCER3), 0);
+ out32 (REG (SDRAM0, MCER4), 0);
+ out32 (REG (SDRAM0, MCER5), 0);
+ out32 (REG (SDRAM0, MCER6), 0);
+ out32 (REG (SDRAM0, MCER7), 0);
+ iobarrier_rw ();
+
+ /* Disable memory
+ */
+ out32 (REG (SDRAM0, MCCR), 0x13b06000);
+ iobarrier_rw ();
#endif
- /* Only the first memory bank is initialised now
- */
- if (! cpc710_compute_mcer(& mcer, & bank_size, 0))
- {
- puts("Unsupported SDRAM type !\n");
- hang();
- }
- memsize += bank_size;
+ /* Only the first memory bank is initialised now
+ */
+ if (!cpc710_compute_mcer (&mcer, &bank_size, 0)) {
+ puts ("Unsupported SDRAM type !\n");
+ hang ();
+ }
+ memsize += bank_size;
#ifndef CFG_RAMBOOT
- /* Enable bank, zero start
- */
- out32(REG(SDRAM0, MCER0), mcer | 0x80000000);
- iobarrier_rw();
+ /* Enable bank, zero start
+ */
+ out32 (REG (SDRAM0, MCER0), mcer | 0x80000000);
+ iobarrier_rw ();
#endif
#ifndef CFG_RAMBOOT
- /* Enable memory
- */
- out32(REG(SDRAM0, MCCR), in32(REG(SDRAM0, MCCR)) | 0x80000000);
-
- /* Wait until initialisation finished
- */
- while (! (in32 (REG(SDRAM0, MCCR)) & 0x20000000))
- {
- iobarrier_rw();
- }
-
- /* Clear Memory Error Status and Address registers
- */
- out32(REG(SDRAM0, MESR), 0);
- out32(REG(SDRAM0, MEAR), 0);
- iobarrier_rw();
-
- /* ECC is not configured now
- */
+ /* Enable memory
+ */
+ out32 (REG (SDRAM0, MCCR), in32 (REG (SDRAM0, MCCR)) | 0x80000000);
+
+ /* Wait until initialisation finished
+ */
+ while (!(in32 (REG (SDRAM0, MCCR)) & 0x20000000)) {
+ iobarrier_rw ();
+ }
+
+ /* Clear Memory Error Status and Address registers
+ */
+ out32 (REG (SDRAM0, MESR), 0);
+ out32 (REG (SDRAM0, MEAR), 0);
+ iobarrier_rw ();
+
+ /* ECC is not configured now
+ */
#endif
- /* Memory size counter
- */
- out32(REG(CPC0, RGBAN1), memsize);
+ /* Memory size counter
+ */
+ out32 (REG (CPC0, RGBAN1), memsize);
- return memsize;
+ return memsize;
}
-static int cpc710_compute_mcer (
- u32 * mcer,
- unsigned long * size,
- unsigned int sdram)
+static int cpc710_compute_mcer (u32 * mcer, unsigned long *size, unsigned int sdram)
{
- u8 rows;
- u8 cols;
- u8 banks2;
- unsigned int lines;
- u32 mc = 0;
- unsigned int i;
- cpc710_mem_org_t * org = 0;
-
-
- if (! i2c_reset())
- {
- puts("Can't reset I2C!\n");
- hang();
- }
-
- if (! cpc710_eeprom_checksum(sdram))
- {
- puts("Invalid EEPROM checksum !\n");
- hang();
- }
-
- rows = cpc710_eeprom_read(sdram, 3);
- cols = cpc710_eeprom_read(sdram, 4);
- /* Can be 2 or 4 banks; divide by 2
- */
- banks2 = cpc710_eeprom_read(sdram, 17) / 2;
-
- lines = rows + cols + banks2;
-
- if (lines < 18 || lines > 26)
- {
- /* Unsupported configuration
- */
- return 0;
- }
-
-
- mc |= cpc710_mcer_mem [lines - 18] << 6;
-
- for (i = 0; i < sizeof(cpc710_mem_org) / sizeof(cpc710_mem_org_t); i++)
- {
- cpc710_mem_org_t * corg = cpc710_mem_org + i;
-
- if (corg->rows == rows && corg->cols == cols && corg->banks2 == banks2)
- {
- org = corg;
-
- break;
- }
- }
-
- if (! org)
- {
- /* Unsupported configuration
- */
- return 0;
- }
-
- mc |= (u32) org->org << 2;
-
- /* Supported configuration
- */
- *mcer = mc;
- *size = 1l << (lines + 4);
-
- return 1;
+ u8 rows;
+ u8 cols;
+ u8 banks2;
+ unsigned int lines;
+ u32 mc = 0;
+ unsigned int i;
+ cpc710_mem_org_t *org = 0;
+
+ if (!i2c_reset ()) {
+ puts ("Can't reset I2C!\n");
+ hang ();
+ }
+
+ if (!cpc710_eeprom_checksum (sdram)) {
+ puts ("Invalid EEPROM checksum !\n");
+ hang ();
+ }
+
+ rows = cpc710_eeprom_read (sdram, 3);
+ cols = cpc710_eeprom_read (sdram, 4);
+ /* Can be 2 or 4 banks; divide by 2
+ */
+ banks2 = cpc710_eeprom_read (sdram, 17) / 2;
+
+ lines = rows + cols + banks2;
+
+ if (lines < 18 || lines > 26) {
+ /* Unsupported configuration
+ */
+ return 0;
+ }
+
+ mc |= cpc710_mcer_mem[lines - 18] << 6;
+
+ for (i = 0; i < sizeof (cpc710_mem_org) / sizeof (cpc710_mem_org_t);
+ i++) {
+ cpc710_mem_org_t *corg = cpc710_mem_org + i;
+
+ if (corg->rows == rows && corg->cols == cols
+ && corg->banks2 == banks2) {
+ org = corg;
+
+ break;
+ }
+ }
+
+ if (!org) {
+ /* Unsupported configuration
+ */
+ return 0;
+ }
+
+ mc |= (u32) org->org << 2;
+
+ /* Supported configuration
+ */
+ *mcer = mc;
+ *size = 1l << (lines + 4);
+
+ return 1;
}
-static int cpc710_eeprom_checksum (
- unsigned int sdram)
+static int cpc710_eeprom_checksum (unsigned int sdram)
{
- u8 sum = 0;
- unsigned int i;
+ u8 sum = 0;
+ unsigned int i;
- for (i = 0; i < 63; i++)
- {
- sum += cpc710_eeprom_read(sdram, i);
- }
+ for (i = 0; i < 63; i++) {
+ sum += cpc710_eeprom_read (sdram, i);
+ }
- return sum == cpc710_eeprom_read(sdram, 63);
+ return sum == cpc710_eeprom_read (sdram, 63);
}
-static u8 cpc710_eeprom_read (
- unsigned int sdram,
- unsigned int offset)
+static u8 cpc710_eeprom_read (unsigned int sdram, unsigned int offset)
{
- u8 dev = (sdram << 1) | 0xa0;
- u8 data;
+ u8 dev = (sdram << 1) | 0xa0;
+ u8 data;
- if (! i2c_read_byte(& data, dev,offset))
- {
- puts("I2C error !\n");
- hang();
- }
+ if (!i2c_read_byte (&data, dev, offset)) {
+ puts ("I2C error !\n");
+ hang ();
+ }
- return data;
+ return data;
}
diff --git a/board/pcippc2/fpga_serial.h b/board/pcippc2/fpga_serial.h
index 92c9cdd..5275014 100644
--- a/board/pcippc2/fpga_serial.h
+++ b/board/pcippc2/fpga_serial.h
@@ -25,10 +25,10 @@
#define _FPGA_SERIAL_H_
extern void fpga_serial_init (int);
-extern void fpga_serial_putc (char);
-extern void fpga_serial_puts (const char *);
-extern int fpga_serial_getc (void);
-extern int fpga_serial_tstc (void);
-extern void fpga_serial_setbrg (void);
+extern void fpga_serial_putc (char);
+extern void fpga_serial_puts (const char *);
+extern int fpga_serial_getc (void);
+extern int fpga_serial_tstc (void);
+extern void fpga_serial_setbrg (void);
#endif
diff --git a/board/pcippc2/pcippc2.h b/board/pcippc2/pcippc2.h
index 3820bbe..a1366ef 100644
--- a/board/pcippc2/pcippc2.h
+++ b/board/pcippc2/pcippc2.h
@@ -38,11 +38,11 @@ extern u32 pcippc2_fpga1_phys;
extern u32 pcippc2_sdram_size (void);
-extern void pcippc2_fpga_init (void);
+extern void pcippc2_fpga_init (void);
-extern void pcippc2_cpci3264_init (void);
+extern void pcippc2_cpci3264_init (void);
-extern void cpc710_pci_init (void);
+extern void cpc710_pci_init (void);
extern void cpc710_pci_enable_timeout (void);
extern unsigned long
diff --git a/board/pcippc2/sconsole.h b/board/pcippc2/sconsole.h
index 40fd75b..5d850a5 100644
--- a/board/pcippc2/sconsole.h
+++ b/board/pcippc2/sconsole.h
@@ -26,24 +26,23 @@
#include <config.h>
-typedef struct sconsole_buffer_s
-{
- unsigned long size;
- unsigned long max_size;
- unsigned long pos;
- unsigned long baud;
- char data [1];
+typedef struct sconsole_buffer_s {
+ unsigned long size;
+ unsigned long max_size;
+ unsigned long pos;
+ unsigned long baud;
+ char data[1];
} sconsole_buffer_t;
#define SCONSOLE_BUFFER ((sconsole_buffer_t *) CFG_SCONSOLE_ADDR)
-extern void (* sconsole_putc) (char);
-extern void (* sconsole_puts) (const char *);
-extern int (* sconsole_getc) (void);
-extern int (* sconsole_tstc) (void);
-extern void (* sconsole_setbrg) (void);
+extern void (* sconsole_putc) (char);
+extern void (* sconsole_puts) (const char *);
+extern int (* sconsole_getc) (void);
+extern int (* sconsole_tstc) (void);
+extern void (* sconsole_setbrg) (void);
extern void sconsole_flush (void);
-extern int sconsole_get_baudrate (void);
+extern int sconsole_get_baudrate (void);
#endif
diff --git a/board/pcippc2/u-boot.lds b/board/pcippc2/u-boot.lds
index 1959807..ebb1b6d 100644
--- a/board/pcippc2/u-boot.lds
+++ b/board/pcippc2/u-boot.lds
@@ -40,11 +40,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 96adbc9..620000a 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -798,8 +798,8 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(
- led, 2, 1, do_led,
- "led [bitmask] - set the DIAG-LED\n",
+ led, 2, 1, do_led,
+ "led [bitmask] - set the DIAG-LED\n",
"[bitmask] 0x01 = DIAG 1 on\n"
" 0x02 = DIAG 2 on\n"
" 0x04 = DIAG 3 on\n"
@@ -860,8 +860,8 @@ int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(
- sha1, 4, 1, do_sha1,
- "sha1 - calculate the SHA1 Sum\n",
+ sha1, 4, 1, do_sha1,
+ "sha1 - calculate the SHA1 Sum\n",
"address len [addr] calculate the SHA1 sum [save at addr]\n"
" -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
" -c check the U-Boot image in flash\n"
diff --git a/board/pcs440ep/u-boot.lds b/board/pcs440ep/u-boot.lds
index 0a8ed67..ed61359 100644
--- a/board/pcs440ep/u-boot.lds
+++ b/board/pcs440ep/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/pm520/flash.c b/board/pm520/flash.c
index 38f579b..4301b8c 100644
--- a/board/pm520/flash.c
+++ b/board/pm520/flash.c
@@ -35,36 +35,36 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#undef FLASH_PORT_WIDTH16
#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) (x)
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) (x)
#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) (x)
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) (x)
#endif
/* Intel-compatible flash ID */
-#define INTEL_COMPAT 0x00890089
-#define INTEL_ALT 0x00B000B0
+#define INTEL_COMPAT 0x00890089
+#define INTEL_ALT 0x00B000B0
/* Intel-compatible flash commands */
-#define INTEL_PROGRAM 0x00100010
-#define INTEL_ERASE 0x00200020
-#define INTEL_CLEAR 0x00500050
-#define INTEL_LOCKBIT 0x00600060
-#define INTEL_PROTECT 0x00010001
-#define INTEL_STATUS 0x00700070
-#define INTEL_READID 0x00900090
-#define INTEL_CONFIRM 0x00D000D0
-#define INTEL_RESET 0xFFFFFFFF
+#define INTEL_PROGRAM 0x00100010
+#define INTEL_ERASE 0x00200020
+#define INTEL_CLEAR 0x00500050
+#define INTEL_LOCKBIT 0x00600060
+#define INTEL_PROTECT 0x00010001
+#define INTEL_STATUS 0x00700070
+#define INTEL_READID 0x00900090
+#define INTEL_CONFIRM 0x00D000D0
+#define INTEL_RESET 0xFFFFFFFF
/* Intel-compatible flash status bits */
-#define INTEL_FINISHED 0x00800080
-#define INTEL_OK 0x00800080
+#define INTEL_FINISHED 0x00800080
+#define INTEL_OK 0x00800080
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
#define mb() __asm__ __volatile__ ("" : : : "memory")
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index 5e7bf34..5d32525 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -93,7 +93,7 @@ initdram(int board_type)
udelay (200);
while (gur->ddrdllcr != 0x81000100)
{
- gur->devdisr = gur->devdisr | 0x00010000;
+ gur->devdisr = gur->devdisr | 0x00010000;
asm("sync;isync;msync");
for (i=0; i<x; i++)
;
diff --git a/board/pm854/u-boot.lds b/board/pm854/u-boot.lds
index 075d8f3..f200810 100644
--- a/board/pm854/u-boot.lds
+++ b/board/pm854/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index 792d1e5..6386abc 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -248,7 +248,7 @@ initdram(int board_type)
udelay (200);
while (gur->ddrdllcr != 0x81000100)
{
- gur->devdisr = gur->devdisr | 0x00010000;
+ gur->devdisr = gur->devdisr | 0x00010000;
asm("sync;isync;msync");
for (i=0; i<x; i++)
;
diff --git a/board/pm856/u-boot.lds b/board/pm856/u-boot.lds
index d52a325..01727d1 100644
--- a/board/pm856/u-boot.lds
+++ b/board/pm856/u-boot.lds
@@ -44,11 +44,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/pn62/pn62.h b/board/pn62/pn62.h
index 7bda0ad..f356a40 100644
--- a/board/pn62/pn62.h
+++ b/board/pn62/pn62.h
@@ -26,8 +26,8 @@
/*
* Definitions for the Intel Bridge 21554 or 21555.
*/
-#define I2155X_VPD_ADDR 0xe6
-#define I2155X_VPD_DATA 0xe8
+#define I2155X_VPD_ADDR 0xe6
+#define I2155X_VPD_DATA 0xe8
#define I2155X_VPD_START 0x80
#define I2155X_VPD_SN_START 0x80
@@ -65,17 +65,17 @@
* Definitions for boot protocol using Scratchpad registers.
*/
#define BOOT_DONE 0
-#define BOOT_DONE_CLEAR 0x00dead00
-#define BOOT_DONE_ERROR 0xbad0dead
-#define BOOT_DONE_U_BOOT 0x12345678
-#define BOOT_DONE_LINUX 0x87654321
-#define BOOT_CMD 1
-#define BOOT_CMD_MOVE 0x1
-#define BOOT_CMD_BOOT 0x2
+#define BOOT_DONE_CLEAR 0x00dead00
+#define BOOT_DONE_ERROR 0xbad0dead
+#define BOOT_DONE_U_BOOT 0x12345678
+#define BOOT_DONE_LINUX 0x87654321
+#define BOOT_CMD 1
+#define BOOT_CMD_MOVE 0x1
+#define BOOT_CMD_BOOT 0x2
#define BOOT_DATA 2
#define BOOT_PROTO 3
-#define BOOT_PROTO_READY 0x23456789
-#define BOOT_PROTO_CLEAR 0x00000000
+#define BOOT_PROTO_READY 0x23456789
+#define BOOT_PROTO_CLEAR 0x00000000
#define BOOT_STATUS 4
/*
@@ -145,15 +145,15 @@
/*
* Forward declarations
*/
-int i2155x_init (void);
+int i2155x_init (void);
void i2155x_write_scrapad(int idx, u32 val);
u32 i2155x_read_scrapad (int idx);
void i2155x_set_bar_base (int bar, u32 addr);
-int i2155x_read_vpd (int offset, int size, unsigned char *data);
+int i2155x_read_vpd (int offset, int size, unsigned char *data);
int am79c95x_init (void);
-void set_led (unsigned int number, unsigned int function);
+void set_led (unsigned int number, unsigned int function);
void fatal_error (unsigned int error_code);
void show_startup_phase (int phase);
diff --git a/board/ppmc7xx/u-boot.lds b/board/ppmc7xx/u-boot.lds
index 3231325..5239b35 100644
--- a/board/ppmc7xx/u-boot.lds
+++ b/board/ppmc7xx/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds
index 9b1d91c..d114bd6 100644
--- a/board/prodrive/alpr/u-boot.lds
+++ b/board/prodrive/alpr/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/prodrive/p3mx/mpsc.c b/board/prodrive/p3mx/mpsc.c
index da95cfa..2494ec6 100644
--- a/board/prodrive/p3mx/mpsc.c
+++ b/board/prodrive/p3mx/mpsc.c
@@ -421,7 +421,7 @@ void mpsc_sdma_init (void)
(MV64460_SDMA_WIN_ACCESS_FULL <<
(MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
- /* Setup MPSC internal address space base address */
+ /* Setup MPSC internal address space base address */
GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
/* no high address remap*/
diff --git a/board/prodrive/p3mx/mpsc.h b/board/prodrive/p3mx/mpsc.h
index a03d1cc..aa0f862 100644
--- a/board/prodrive/p3mx/mpsc.h
+++ b/board/prodrive/p3mx/mpsc.h
@@ -67,9 +67,9 @@ extern int (*mpsc_test_char)(void);
#define TX_STOP 0x00010000
#define RX_ENABLE 0x00000080
-#define SDMA_RX_ABORT (1 << 15)
-#define SDMA_TX_ABORT (1 << 31)
-#define MPSC_TX_ABORT (1 << 7)
+#define SDMA_RX_ABORT (1 << 15)
+#define SDMA_TX_ABORT (1 << 31)
+#define MPSC_TX_ABORT (1 << 7)
#define MPSC_RX_ABORT (1 << 23)
#define MPSC_ENTER_HUNT (1 << 31)
diff --git a/board/prodrive/p3mx/u-boot.lds b/board/prodrive/p3mx/u-boot.lds
index 25e16de..1a95755 100644
--- a/board/prodrive/p3mx/u-boot.lds
+++ b/board/prodrive/p3mx/u-boot.lds
@@ -37,11 +37,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/prodrive/p3p440/u-boot.lds b/board/prodrive/p3p440/u-boot.lds
index 2843642..0e6c878 100644
--- a/board/prodrive/p3p440/u-boot.lds
+++ b/board/prodrive/p3p440/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/purple/purple.c b/board/purple/purple.c
index 13a1455..4401aa2 100644
--- a/board/purple/purple.c
+++ b/board/purple/purple.c
@@ -33,25 +33,25 @@
#include "sconsole.h"
-#define cache_unroll(base,op) \
- __asm__ __volatile__(" \
- .set noreorder; \
- .set mips3; \
- cache %1, (%0); \
- .set mips0; \
- .set reorder" \
- : \
- : "r" (base), \
+#define cache_unroll(base,op) \
+ __asm__ __volatile__(" \
+ .set noreorder; \
+ .set mips3; \
+ cache %1, (%0); \
+ .set mips0; \
+ .set reorder" \
+ : \
+ : "r" (base), \
"i" (op));
typedef void (*FUNCPTR)(ulong *source, ulong *destination, ulong nlongs);
extern void asc_serial_init (void);
-extern void asc_serial_putc (char);
-extern void asc_serial_puts (const char *);
-extern int asc_serial_getc (void);
-extern int asc_serial_tstc (void);
-extern void asc_serial_setbrg (void);
+extern void asc_serial_putc (char);
+extern void asc_serial_puts (const char *);
+extern int asc_serial_getc (void);
+extern int asc_serial_tstc (void);
+extern void asc_serial_setbrg (void);
void _machine_restart(void)
{
@@ -184,8 +184,7 @@ static void copydwords (ulong *source, ulong *destination, ulong nlongs)
ulong temp,temp1;
ulong *dstend = destination + nlongs;
- while (destination < dstend)
- {
+ while (destination < dstend) {
temp = *source++;
/* dummy read from sdram */
temp1 = *(ulong *)0xa0000000;
diff --git a/board/purple/sconsole.h b/board/purple/sconsole.h
index d441f37..e130ad4 100644
--- a/board/purple/sconsole.h
+++ b/board/purple/sconsole.h
@@ -26,21 +26,20 @@
#include <config.h>
-typedef struct sconsole_buffer_s
-{
- unsigned long size;
- unsigned long max_size;
- unsigned long pos;
- char data [1];
+typedef struct sconsole_buffer_s {
+ unsigned long size;
+ unsigned long max_size;
+ unsigned long pos;
+ char data[1];
} sconsole_buffer_t;
#define SCONSOLE_BUFFER ((sconsole_buffer_t *) CFG_SCONSOLE_ADDR)
-extern void (* sconsole_putc) (char);
-extern void (* sconsole_puts) (const char *);
-extern int (* sconsole_getc) (void);
-extern int (* sconsole_tstc) (void);
-extern void (* sconsole_setbrg) (void);
+extern void (* sconsole_putc) (char);
+extern void (* sconsole_puts) (const char *);
+extern int (* sconsole_getc) (void);
+extern int (* sconsole_tstc) (void);
+extern void (* sconsole_setbrg) (void);
extern void sconsole_flush (void);
diff --git a/board/pxa255_idp/lowlevel_init.S b/board/pxa255_idp/lowlevel_init.S
index aaa4d8e..80b5182 100644
--- a/board/pxa255_idp/lowlevel_init.S
+++ b/board/pxa255_idp/lowlevel_init.S
@@ -39,7 +39,7 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
.endm
/*
- * Memory setup
+ * Memory setup
*/
.globl lowlevel_init
lowlevel_init:
@@ -118,7 +118,7 @@ lowlevel_init:
#ifdef DEBUG_BLINK_ENABLE
/* 4th debug blink */
- bl blink
+ bl blink
#endif
/* ---------------------------------------------------------------- */
@@ -211,7 +211,7 @@ mem_init:
#ifdef DEBUG_BLINK_ENABLE
/* 5th blink */
- bl blink
+ bl blink
#endif
/* ---------------------------------------------------------------- */
@@ -326,14 +326,14 @@ mem_init:
#if 0
/* FIXME turn on serial ports */
/* look into moving this to board_init() */
- ldr r2, =(PXA_CS5_PHYS + 0x03C0002c)
+ ldr r2, =(PXA_CS5_PHYS + 0x03C0002c)
mov r3, #0x13
str r3, [r2]
#endif
#ifdef DEBUG_BLINK_ENABLE
/* 6th blink */
- bl blink
+ bl blink
#endif
/* ---------------------------------------------------------------- */
@@ -423,7 +423,7 @@ initclks:
#ifdef DEBUG_BLINK_ENABLE
/* 7th blink */
- bl blink
+ bl blink
#endif
endlowlevel_init:
diff --git a/board/quantum/fpga.h b/board/quantum/fpga.h
index 2ef45e5..79b73b5 100644
--- a/board/quantum/fpga.h
+++ b/board/quantum/fpga.h
@@ -31,4 +31,3 @@ int fpga_boot(unsigned char *fpgadata, int size);
#define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */
#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */
#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */
-/* vim: set ts=4 sw=4 tw=78: */
diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds
index dbea90c..1f9a191 100644
--- a/board/quantum/u-boot.lds
+++ b/board/quantum/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/quantum/u-boot.lds.debug b/board/quantum/u-boot.lds.debug
index 5cedcb1..0cd053a 100644
--- a/board/quantum/u-boot.lds.debug
+++ b/board/quantum/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c
index a83ca8d..4fd9d12 100644
--- a/board/r360mpi/pcmcia.c
+++ b/board/r360mpi/pcmcia.c
@@ -195,10 +195,10 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
reg = 0;
switch(vcc) {
- case 0: break;
+ case 0: break;
case 33: reg |= 0x0200; break;
case 50: reg |= 0x0400; break;
- default: goto done;
+ default: goto done;
}
/* Checking supported voltages */
diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds
index c3708bf..5fcd5c9 100644
--- a/board/r360mpi/u-boot.lds
+++ b/board/r360mpi/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/r7780mp/lowlevel_init.S b/board/r7780mp/lowlevel_init.S
index eb5d8b7..05c075b 100644
--- a/board/r7780mp/lowlevel_init.S
+++ b/board/r7780mp/lowlevel_init.S
@@ -326,11 +326,11 @@ RWTCSR_D_1: .word 0xA507
RWTCSR_D_2: .word 0xA507
RWTCNT_D: .word 0x5A00
-BBG_PMMR_A: .long 0xFF800010
+BBG_PMMR_A: .long 0xFF800010
BBG_PMSR1_A: .long 0xFF800014
BBG_PMSR2_A: .long 0xFF800018
BBG_PMSR3_A: .long 0xFF80001C
-BBG_PMSR4_A: .long 0xFF800020
+BBG_PMSR4_A: .long 0xFF800020
BBG_PMSRG_A: .long 0xFF800024
BBG_PMMR_D_PMSR1: .long 0xffffbffd
@@ -339,7 +339,7 @@ BBG_PMMR_D_PMSR2: .long 0xfc21a7ff
BBG_PMSR2_D: .long 0x03de5800
BBG_PMMR_D_PMSR3: .long 0xfffffff8
BBG_PMSR3_D: .long 0x00000007
-BBG_PMMR_D_PMSR4: .long 0xdffdfff9
+BBG_PMMR_D_PMSR4: .long 0xdffdfff9
BBG_PMSR4_D: .long 0x20020006
BBG_PMMR_D_PMSRG: .long 0xffffffff
BBG_PMSRG_D: .long 0x00000000
diff --git a/board/rbc823/flash.c b/board/rbc823/flash.c
index 84ae5c1..26ebcae 100644
--- a/board/rbc823/flash.c
+++ b/board/rbc823/flash.c
@@ -131,11 +131,11 @@ void flash_print_info (flash_info_t *info)
if (info->size >> 20) {
printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
+ info->size >> 20,
info->sector_count);
} else {
printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10,
+ info->size >> 10,
info->sector_count);
}
@@ -213,7 +213,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x00080000;
- break; /* => 512Kb */
+ break; /* => 512Kb */
default:
info->flash_id = FLASH_UNKNOWN;
@@ -448,7 +448,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts();
/* data polling for D7 */
start = get_timer (0);
diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds
index 8350eda..e417825 100644
--- a/board/rbc823/u-boot.lds
+++ b/board/rbc823/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/rmu/u-boot.lds b/board/rmu/u-boot.lds
index dbea90c..1f9a191 100644
--- a/board/rmu/u-boot.lds
+++ b/board/rmu/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/rmu/u-boot.lds.debug b/board/rmu/u-boot.lds.debug
index 5cedcb1..0cd053a 100644
--- a/board/rmu/u-boot.lds.debug
+++ b/board/rmu/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/rsdproto/flash.c b/board/rsdproto/flash.c
index 5ad3218..4e43b29 100644
--- a/board/rsdproto/flash.c
+++ b/board/rsdproto/flash.c
@@ -76,17 +76,17 @@ unsigned long flash_init (void)
unsigned long long *f_addr = (unsigned long long *)PHYS_FLASH;
unsigned long long f_command, vendor, device;
/* Perform Autoselect */
- f_command = 0x00AA00AA00AA00AAULL;
+ f_command = 0x00AA00AA00AA00AAULL;
ull_write(&f_addr[0x555], &f_command);
- f_command = 0x0055005500550055ULL;
+ f_command = 0x0055005500550055ULL;
ull_write(&f_addr[0x2AA], &f_command);
- f_command = 0x0090009000900090ULL;
+ f_command = 0x0090009000900090ULL;
ull_write(&f_addr[0x555], &f_command);
ull_read(&f_addr[0], &vendor);
vendor &= 0xffff;
ull_read(&f_addr[1], &device);
device &= 0xffff;
- f_command = 0x00F000F000F000F0ULL;
+ f_command = 0x00F000F000F000F0ULL;
ull_write(&f_addr[0x555], &f_command);
if (vendor != VENDOR_AMD || device != AMD_29DL323C_B)
return 0;
@@ -225,16 +225,16 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
printf ("\n");
}
- f_addr = (unsigned long long *)info->start[0];
- f_command = 0x00AA00AA00AA00AAULL;
+ f_addr = (unsigned long long *)info->start[0];
+ f_command = 0x00AA00AA00AA00AAULL;
ull_write(&f_addr[0x555], &f_command);
- f_command = 0x0055005500550055ULL;
+ f_command = 0x0055005500550055ULL;
ull_write(&f_addr[0x2AA], &f_command);
- f_command = 0x0080008000800080ULL;
+ f_command = 0x0080008000800080ULL;
ull_write(&f_addr[0x555], &f_command);
- f_command = 0x00AA00AA00AA00AAULL;
+ f_command = 0x00AA00AA00AA00AAULL;
ull_write(&f_addr[0x555], &f_command);
- f_command = 0x0055005500550055ULL;
+ f_command = 0x0055005500550055ULL;
ull_write(&f_addr[0x2AA], &f_command);
/* Disable interrupts which might cause a timeout here */
@@ -244,9 +244,9 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
for (l_sect = -1, sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- f_addr =
+ f_addr =
(unsigned long long *)(info->start[sect]);
- f_command = 0x0030003000300030ULL;
+ f_command = 0x0030003000300030ULL;
ull_write(f_addr, &f_command);
l_sect = sect;
}
@@ -264,7 +264,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
/* this command turns the flash back to read mode */
f_addr =
(unsigned long long *)(info->start[l_sect]);
- f_command = 0x00F000F000F000F0ULL;
+ f_command = 0x00F000F000F000F0ULL;
ull_write(f_addr, &f_command);
printf (" timeout\n");
return 1;
@@ -357,7 +357,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
*
* PARAMETERS: 32 bit long pointer to address, 64 bit long pointer to data
*
-* RETURNS: 0 if OK, 1 if timeout, 4 if parameter error
+* RETURNS: 0 if OK, 1 if timeout, 4 if parameter error
*--------------------------------------------------------------------------*/
static unsigned char write_ull(flash_info_t *info,
@@ -372,16 +372,16 @@ static unsigned char write_ull(flash_info_t *info,
if (address & 0x7)
return ERR_ALIGN;
- f_addr = (unsigned long long *)info->start[0];
- f_command = 0x00AA00AA00AA00AAULL;
+ f_addr = (unsigned long long *)info->start[0];
+ f_command = 0x00AA00AA00AA00AAULL;
ull_write(&f_addr[0x555], &f_command);
- f_command = 0x0055005500550055ULL;
+ f_command = 0x0055005500550055ULL;
ull_write(&f_addr[0x2AA], &f_command);
- f_command = 0x00A000A000A000A0ULL;
+ f_command = 0x00A000A000A000A0ULL;
ull_write(&f_addr[0x555], &f_command);
- f_addr = (unsigned long long *)address;
- f_command = data;
+ f_addr = (unsigned long long *)address;
+ f_command = data;
ull_write(f_addr, &f_command);
start = get_timer (0);
@@ -391,8 +391,8 @@ static unsigned char write_ull(flash_info_t *info,
{
/* write reset command, command address is unimportant */
/* this command turns the flash back to read mode */
- f_addr = (unsigned long long *)info->start[0];
- f_command = 0x00F000F000F000F0ULL;
+ f_addr = (unsigned long long *)info->start[0];
+ f_command = 0x00F000F000F000F0ULL;
ull_write(f_addr, &f_command);
return ERR_TIMOUT;
}
diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds
index 63dda1f..07a7277 100644
--- a/board/rsdproto/u-boot.lds
+++ b/board/rsdproto/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sandburst/karef/u-boot.lds b/board/sandburst/karef/u-boot.lds
index bc628d9..216f9c64 100644
--- a/board/sandburst/karef/u-boot.lds
+++ b/board/sandburst/karef/u-boot.lds
@@ -44,11 +44,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
index a2352a3..af7d5c0 100644
--- a/board/sandburst/karef/u-boot.lds.debug
+++ b/board/sandburst/karef/u-boot.lds.debug
@@ -34,11 +34,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sandburst/metrobox/u-boot.lds b/board/sandburst/metrobox/u-boot.lds
index ebc44d9..6abf3f3 100644
--- a/board/sandburst/metrobox/u-boot.lds
+++ b/board/sandburst/metrobox/u-boot.lds
@@ -44,11 +44,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
index 8f4c6d7..527c264 100644
--- a/board/sandburst/metrobox/u-boot.lds.debug
+++ b/board/sandburst/metrobox/u-boot.lds.debug
@@ -34,11 +34,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sandpoint/sandpoint.c b/board/sandpoint/sandpoint.c
index d3445bd..aeb10a7 100644
--- a/board/sandpoint/sandpoint.c
+++ b/board/sandpoint/sandpoint.c
@@ -40,7 +40,7 @@ int checkboard (void)
return 0;
}
-#if 0 /* NOT USED */
+#if 0 /* NOT USED */
int checkflash (void)
{
/* TODO: XXX XXX XXX */
diff --git a/board/sandpoint/speed.h b/board/sandpoint/speed.h
index b66393b..3f32a14 100644
--- a/board/sandpoint/speed.h
+++ b/board/sandpoint/speed.h
@@ -28,10 +28,10 @@
* SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
*
* SPEED_FCOUNT2 timer 2 counting frequency
- * GCLK CPU clock
+ * GCLK CPU clock
* SPEED_TMR2_PS prescaler
*/
-#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
/*-----------------------------------------------------------------------
* Timer value for PIT
diff --git a/board/sbc405/u-boot.lds b/board/sbc405/u-boot.lds
index a969673..7b1c6b2 100644
--- a/board/sbc405/u-boot.lds
+++ b/board/sbc405/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sbc8548/law.c b/board/sbc8548/law.c
index d903cdc..bcf3468 100644
--- a/board/sbc8548/law.c
+++ b/board/sbc8548/law.c
@@ -40,7 +40,7 @@
* 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
*
* Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*/
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 46496da..9c8c673 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -310,7 +310,7 @@ long int fixed_sdram (void)
ddr->sdram_interval = 0x05080100;
ddr->sdram_md_cntl = 0x00000000;
ddr->sdram_data_init = 0x00000000;
- ddr->sdram_clk_cntl = 0x03800000;
+ ddr->sdram_clk_cntl = 0x03800000;
asm("sync;isync;msync");
udelay(500);
diff --git a/board/sbc8548/u-boot.lds b/board/sbc8548/u-boot.lds
index 03f62b8..eba7e8a 100644
--- a/board/sbc8548/u-boot.lds
+++ b/board/sbc8548/u-boot.lds
@@ -42,11 +42,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sbc8560/u-boot.lds b/board/sbc8560/u-boot.lds
index 4b31797..ba5ce0b 100644
--- a/board/sbc8560/u-boot.lds
+++ b/board/sbc8560/u-boot.lds
@@ -46,11 +46,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sbc8641d/u-boot.lds b/board/sbc8641d/u-boot.lds
index be362ee..a9e9d80 100644
--- a/board/sbc8641d/u-boot.lds
+++ b/board/sbc8641d/u-boot.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c
index 0940764..fbdc1d7 100644
--- a/board/sc3/sc3.c
+++ b/board/sc3/sc3.c
@@ -446,7 +446,7 @@ static void printCSConfig(int reg,unsigned long ap,unsigned long cr)
printf(" at 0x%08lX", cr & 0xFFF00000U);
printf(" size: %u MB", banks[(cr & 0x000E0000) >> 17]);
printf(" rights: %s", bankaccess[(cr & 0x00018000) >> 15]);
- if (ap & 0x80000000) {
+ if (ap & 0x80000000) {
printf("\n -Burst device (%luns/%luns)",
(((ap & 0x7C000000) >> 26) + 1) * CYCLE,
(((ap & 0x03800000) >> 23) + 1) * CYCLE);
diff --git a/board/sc3/sc3.h b/board/sc3/sc3.h
index cf920f9..060aece 100644
--- a/board/sc3/sc3.h
+++ b/board/sc3/sc3.h
@@ -85,7 +85,7 @@ static unsigned long inline hcReadDWord (unsigned long base, unsigned int offset
/* control and status registers isp1161 */
#define HcRevision 0x00
-#define HcControl 0x01
+#define HcControl 0x01
#define HcCommandStatus 0x02
#define HcInterruptStatus 0x03
#define HcInterruptEnable 0x04
diff --git a/board/sc3/u-boot.lds b/board/sc3/u-boot.lds
index 24cf46c..27cc0b9 100644
--- a/board/sc3/u-boot.lds
+++ b/board/sc3/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index f6f0e72..8050aa6 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -233,9 +233,9 @@ static void bus_init(void)
{
/* set up the GP IO pins */
- write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */
- write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin function 15-0 reg */
- write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */
write_mmcr_byte(SC520_CLKSEL, 0x70);
diff --git a/board/sc520_cdp/sc520_cdp_asm.S b/board/sc520_cdp/sc520_cdp_asm.S
index 7f70d65..6ac5a5d 100644
--- a/board/sc520_cdp/sc520_cdp_asm.S
+++ b/board/sc520_cdp/sc520_cdp_asm.S
@@ -73,7 +73,7 @@ done: movb $0x88, %al
movw $0x680, %dx
out %al, %dx
- jmp *%ebp /* return to caller */
+ jmp *%ebp /* return to caller */
.globl show_boot_progress
diff --git a/board/sc520_cdp/u-boot.lds b/board/sc520_cdp/u-boot.lds
index 12c850f..9609326 100644
--- a/board/sc520_cdp/u-boot.lds
+++ b/board/sc520_cdp/u-boot.lds
@@ -33,7 +33,7 @@ SECTIONS
. = ALIGN(4);
.rodata : { *(.rodata) *(.rodata.str1.1) *(.rodata.str1.32) }
- . = 0x400000; /* Ram data segment to use */
+ . = 0x400000; /* Ram data segment to use */
_i386boot_romdata_dest = ABSOLUTE(.);
.data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
_i386boot_romdata_start = LOADADDR(.data);
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
index d119a7d..038d479 100644
--- a/board/sc520_spunk/sc520_spunk.c
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -256,11 +256,11 @@ static void bus_init(void)
if (version) {
/* set up the GP IO pins (for the Spunk board) */
- write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */
- write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */
- write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */
- write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */
- write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */
+ write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */
write_mmcr_byte(SC520_CLKSEL, 0x70);
write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */
@@ -268,11 +268,11 @@ static void bus_init(void)
} else {
/* set up the GP IO pins (for the Hyglo board) */
- write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */
- write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */
- write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */
- write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */
- write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */
+ write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */
write_mmcr_byte(SC520_CLKSEL, 0x70);
write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */
@@ -656,7 +656,7 @@ ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
offset |= addr[i];
}
- return read_mmcr_byte(SC520_SYSINFO) ?
+ return read_mmcr_byte(SC520_SYSINFO) ?
spi_eeprom_read(1, offset, buffer, len) :
mw_eeprom_read(1, offset, buffer, len);
}
@@ -672,7 +672,7 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
offset |= addr[i];
}
- return read_mmcr_byte(SC520_SYSINFO) ?
+ return read_mmcr_byte(SC520_SYSINFO) ?
spi_eeprom_write(1, offset, buffer, len) :
mw_eeprom_write(1, offset, buffer, len);
}
diff --git a/board/sc520_spunk/sc520_spunk_asm.S b/board/sc520_spunk/sc520_spunk_asm.S
index 0127076..3430b6a 100644
--- a/board/sc520_spunk/sc520_spunk_asm.S
+++ b/board/sc520_spunk/sc520_spunk_asm.S
@@ -70,7 +70,7 @@ next: addl $8, %esi /* advance esi */
done: movl $0xfffefc32,%edx
movw $0000,(%edx)
- jmp *%ebp /* return to caller */
+ jmp *%ebp /* return to caller */
.globl show_boot_progress
diff --git a/board/sc520_spunk/u-boot.lds b/board/sc520_spunk/u-boot.lds
index 887e0a0..33480d3 100644
--- a/board/sc520_spunk/u-boot.lds
+++ b/board/sc520_spunk/u-boot.lds
@@ -34,7 +34,7 @@ SECTIONS
. = ALIGN(4);
.rodata : { *(.rodata) }
- . = 0x400000; /* Ram data segment to use */
+ . = 0x400000; /* Ram data segment to use */
_i386boot_romdata_dest = ABSOLUTE(.);
.data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
_i386boot_romdata_start = LOADADDR(.data);
diff --git a/board/siemens/CCM/u-boot.lds b/board/siemens/CCM/u-boot.lds
index ee598c2..10b38ec 100644
--- a/board/siemens/CCM/u-boot.lds
+++ b/board/siemens/CCM/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/siemens/CCM/u-boot.lds.debug b/board/siemens/CCM/u-boot.lds.debug
index d799f93..bf63991 100644
--- a/board/siemens/CCM/u-boot.lds.debug
+++ b/board/siemens/CCM/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds
index 6a1e718..291f6b3 100644
--- a/board/siemens/IAD210/u-boot.lds
+++ b/board/siemens/IAD210/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/siemens/SMN42/lowlevel_init.S b/board/siemens/SMN42/lowlevel_init.S
index 11abb63..f13d9b9 100644
--- a/board/siemens/SMN42/lowlevel_init.S
+++ b/board/siemens/SMN42/lowlevel_init.S
@@ -26,11 +26,11 @@
/* some parameters for the board */
/* setting up the CPU-internal memory */
-#define SRAM_START 0x40000000
-#define SRAM_SIZE 0x00004000
-#define BCFG0_VALUE 0x1000ffef
-#define BCFG1_VALUE 0x10005D2F
-#define BCFG2_VALUE 0x10005D2F
+#define SRAM_START 0x40000000
+#define SRAM_SIZE 0x00004000
+#define BCFG0_VALUE 0x1000ffef
+#define BCFG1_VALUE 0x10005D2F
+#define BCFG2_VALUE 0x10005D2F
/*
* For P0.18 to set ZZ to the SRAMs to 1. Also set P0.2 (SCL) and P0.3 (SDA)
* for the bit-banger I2C driver correctly.
diff --git a/board/siemens/pcu_e/u-boot.lds b/board/siemens/pcu_e/u-boot.lds
index 9301571..bc1ea73 100644
--- a/board/siemens/pcu_e/u-boot.lds
+++ b/board/siemens/pcu_e/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/siemens/pcu_e/u-boot.lds.debug b/board/siemens/pcu_e/u-boot.lds.debug
index 44bae70..2ee8237 100644
--- a/board/siemens/pcu_e/u-boot.lds.debug
+++ b/board/siemens/pcu_e/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds
index 343c4d7..b91c44a 100644
--- a/board/sixnet/u-boot.lds
+++ b/board/sixnet/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/sl8245/Makefile b/board/sl8245/Makefile
index d3db1a9..dcb1907 100644
--- a/board/sl8245/Makefile
+++ b/board/sl8245/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/smdk2410/lowlevel_init.S b/board/smdk2410/lowlevel_init.S
index 310f2a0..ab6afdd 100644
--- a/board/smdk2410/lowlevel_init.S
+++ b/board/smdk2410/lowlevel_init.S
@@ -45,85 +45,85 @@
#define BWSCON 0x48000000
/* BWSCON */
-#define DW8 (0x0)
-#define DW16 (0x1)
-#define DW32 (0x2)
-#define WAIT (0x1<<2)
-#define UBLB (0x1<<3)
-
-#define B1_BWSCON (DW32)
-#define B2_BWSCON (DW16)
-#define B3_BWSCON (DW16 + WAIT + UBLB)
-#define B4_BWSCON (DW16)
-#define B5_BWSCON (DW16)
-#define B6_BWSCON (DW32)
-#define B7_BWSCON (DW32)
+#define DW8 (0x0)
+#define DW16 (0x1)
+#define DW32 (0x2)
+#define WAIT (0x1<<2)
+#define UBLB (0x1<<3)
+
+#define B1_BWSCON (DW32)
+#define B2_BWSCON (DW16)
+#define B3_BWSCON (DW16 + WAIT + UBLB)
+#define B4_BWSCON (DW16)
+#define B5_BWSCON (DW16)
+#define B6_BWSCON (DW32)
+#define B7_BWSCON (DW32)
/* BANK0CON */
-#define B0_Tacs 0x0 /* 0clk */
-#define B0_Tcos 0x0 /* 0clk */
-#define B0_Tacc 0x7 /* 14clk */
-#define B0_Tcoh 0x0 /* 0clk */
-#define B0_Tah 0x0 /* 0clk */
-#define B0_Tacp 0x0
-#define B0_PMC 0x0 /* normal */
+#define B0_Tacs 0x0 /* 0clk */
+#define B0_Tcos 0x0 /* 0clk */
+#define B0_Tacc 0x7 /* 14clk */
+#define B0_Tcoh 0x0 /* 0clk */
+#define B0_Tah 0x0 /* 0clk */
+#define B0_Tacp 0x0
+#define B0_PMC 0x0 /* normal */
/* BANK1CON */
-#define B1_Tacs 0x0 /* 0clk */
-#define B1_Tcos 0x0 /* 0clk */
-#define B1_Tacc 0x7 /* 14clk */
-#define B1_Tcoh 0x0 /* 0clk */
-#define B1_Tah 0x0 /* 0clk */
-#define B1_Tacp 0x0
-#define B1_PMC 0x0
-
-#define B2_Tacs 0x0
-#define B2_Tcos 0x0
-#define B2_Tacc 0x7
-#define B2_Tcoh 0x0
-#define B2_Tah 0x0
-#define B2_Tacp 0x0
-#define B2_PMC 0x0
-
-#define B3_Tacs 0x0 /* 0clk */
-#define B3_Tcos 0x3 /* 4clk */
-#define B3_Tacc 0x7 /* 14clk */
-#define B3_Tcoh 0x1 /* 1clk */
-#define B3_Tah 0x0 /* 0clk */
-#define B3_Tacp 0x3 /* 6clk */
-#define B3_PMC 0x0 /* normal */
-
-#define B4_Tacs 0x0 /* 0clk */
-#define B4_Tcos 0x0 /* 0clk */
-#define B4_Tacc 0x7 /* 14clk */
-#define B4_Tcoh 0x0 /* 0clk */
-#define B4_Tah 0x0 /* 0clk */
-#define B4_Tacp 0x0
-#define B4_PMC 0x0 /* normal */
-
-#define B5_Tacs 0x0 /* 0clk */
-#define B5_Tcos 0x0 /* 0clk */
-#define B5_Tacc 0x7 /* 14clk */
-#define B5_Tcoh 0x0 /* 0clk */
-#define B5_Tah 0x0 /* 0clk */
-#define B5_Tacp 0x0
-#define B5_PMC 0x0 /* normal */
-
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1
-#define B6_SCAN 0x1 /* 9bit */
-
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x1 /* 9bit */
+#define B1_Tacs 0x0 /* 0clk */
+#define B1_Tcos 0x0 /* 0clk */
+#define B1_Tacc 0x7 /* 14clk */
+#define B1_Tcoh 0x0 /* 0clk */
+#define B1_Tah 0x0 /* 0clk */
+#define B1_Tacp 0x0
+#define B1_PMC 0x0
+
+#define B2_Tacs 0x0
+#define B2_Tcos 0x0
+#define B2_Tacc 0x7
+#define B2_Tcoh 0x0
+#define B2_Tah 0x0
+#define B2_Tacp 0x0
+#define B2_PMC 0x0
+
+#define B3_Tacs 0x0 /* 0clk */
+#define B3_Tcos 0x3 /* 4clk */
+#define B3_Tacc 0x7 /* 14clk */
+#define B3_Tcoh 0x1 /* 1clk */
+#define B3_Tah 0x0 /* 0clk */
+#define B3_Tacp 0x3 /* 6clk */
+#define B3_PMC 0x0 /* normal */
+
+#define B4_Tacs 0x0 /* 0clk */
+#define B4_Tcos 0x0 /* 0clk */
+#define B4_Tacc 0x7 /* 14clk */
+#define B4_Tcoh 0x0 /* 0clk */
+#define B4_Tah 0x0 /* 0clk */
+#define B4_Tacp 0x0
+#define B4_PMC 0x0 /* normal */
+
+#define B5_Tacs 0x0 /* 0clk */
+#define B5_Tcos 0x0 /* 0clk */
+#define B5_Tacc 0x7 /* 14clk */
+#define B5_Tcoh 0x0 /* 0clk */
+#define B5_Tah 0x0 /* 0clk */
+#define B5_Tacp 0x0
+#define B5_PMC 0x0 /* normal */
+
+#define B6_MT 0x3 /* SDRAM */
+#define B6_Trcd 0x1
+#define B6_SCAN 0x1 /* 9bit */
+
+#define B7_MT 0x3 /* SDRAM */
+#define B7_Trcd 0x1 /* 3clk */
+#define B7_SCAN 0x1 /* 9bit */
/* REFRESH parameter */
-#define REFEN 0x1 /* Refresh enable */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-#define Trp 0x0 /* 2clk */
-#define Trc 0x3 /* 7clk */
-#define Tchr 0x2 /* 3clk */
-#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
+#define REFEN 0x1 /* Refresh enable */
+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
+#define Trp 0x0 /* 2clk */
+#define Trc 0x3 /* 7clk */
+#define Tchr 0x2 /* 3clk */
+#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
/**************************************/
_TEXT_BASE:
diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds
index ba6f388..2410d5f 100644
--- a/board/snmc/qs850/u-boot.lds
+++ b/board/snmc/qs850/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/snmc/qs860t/flash.c b/board/snmc/qs860t/flash.c
index c84d08d..aa2e856 100644
--- a/board/snmc/qs860t/flash.c
+++ b/board/snmc/qs860t/flash.c
@@ -79,8 +79,7 @@ unsigned long flash_init (void)
}
/* Only one bank */
- if (CFG_MAX_FLASH_BANKS == 1)
- {
+ if (CFG_MAX_FLASH_BANKS == 1) {
/* Setup offsets */
flash_get_offsets (FLASH_BASE1_PRELIM, &flash_info[0]);
@@ -98,15 +97,11 @@ unsigned long flash_init (void)
#endif
size_b1 = 0 ;
flash_info[0].size = size_b0;
- }
- /* 2 banks */
- else
- {
+ } else { /* 2 banks */
size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE1_PRELIM, &flash_info[1]);
/* Re-do sizing to get full correct info */
- if (size_b1)
- {
+ if (size_b1) {
mtdcr(ebccfga, pb0cr);
pbcr = mfdcr(ebccfgd);
mtdcr(ebccfga, pb0cr);
@@ -115,8 +110,7 @@ unsigned long flash_init (void)
mtdcr(ebccfgd, pbcr);
}
- if (size_b0)
- {
+ if (size_b0) {
mtdcr(ebccfga, pb1cr);
pbcr = mfdcr(ebccfgd);
mtdcr(ebccfga, pb1cr);
@@ -566,17 +560,17 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x00400000;
- break; /* => 32 MBit */
+ break; /* => 32 MBit */
case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
- break; /* => 64 MBit */
+ break; /* => 64 MBit */
case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
- break; /* => 128 MBit */
+ break; /* => 128 MBit */
default:
/* FIXME*/
@@ -613,10 +607,11 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
- volatile FLASH_WORD_SIZE *addr=(volatile FLASH_WORD_SIZE*)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr =
+ (volatile FLASH_WORD_SIZE *) (info->start[0]);
int flag, prot, sect, l_sect, barf;
ulong start, now, last;
int rcode = 0;
@@ -631,22 +626,21 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
}
if ((info->flash_id == FLASH_UNKNOWN) ||
- ((info->flash_id > FLASH_AMD_COMP) &&
- ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
+ ((info->flash_id > FLASH_AMD_COMP) &&
+ ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL))) {
printf ("Can't erase unknown flash type - aborted\n");
return 1;
}
prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
+ for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
@@ -654,109 +648,112 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
l_sect = -1;
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
- if(info->flash_id < FLASH_AMD_COMP) {
+ flag = disable_interrupts ();
+ if (info->flash_id < FLASH_AMD_COMP) {
#ifndef CFG_FLASH_16BIT
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
#else
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
- addr[0x0555] = 0x0080;
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x0080;
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
#endif
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
- addr[0] = (0x00300030 & FLASH_ID_MASK);
- l_sect = sect;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (volatile FLASH_WORD_SIZE *) (info->start[sect]);
+ addr[0] = (0x00300030 & FLASH_ID_MASK);
+ l_sect = sect;
+ }
}
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (volatile FLASH_WORD_SIZE*)(info->start[l_sect]);
- while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
- (0x00800080&FLASH_ID_MASK) )
- {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (volatile FLASH_WORD_SIZE *) (info->start[l_sect]);
+ while ((addr[0] & (0x00800080 & FLASH_ID_MASK)) !=
+ (0x00800080 & FLASH_ID_MASK)) {
+ if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
}
- }
-DONE:
- /* reset to read mode */
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
- } else {
+ DONE:
+ /* reset to read mode */
+ addr = (volatile FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+ } else {
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- barf = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ barf = 0;
#ifndef CFG_FLASH_16BIT
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00200020;
- addr[0] = 0x00D000D0;
- while(!(addr[0] & 0x00800080)); /* wait for error or finish */
- if( addr[0] & 0x003A003A) { /* check for error */
- barf = addr[0] & 0x003A0000;
- if( barf ) {
- barf >>=16;
- } else {
- barf = addr[0] & 0x0000003A;
+ addr = (vu_long *) (info->start[sect]);
+ addr[0] = 0x00200020;
+ addr[0] = 0x00D000D0;
+ while (!(addr[0] & 0x00800080)); /* wait for error or finish */
+ if (addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if (barf) {
+ barf >>= 16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
}
- }
#else
- addr = (vu_short*)(info->start[sect]);
- addr[0] = 0x0020;
- addr[0] = 0x00D0;
- while(!(addr[0] & 0x0080)); /* wait for error or finish */
- if( addr[0] & 0x003A) /* check for error */
- barf = addr[0] & 0x003A;
+ addr = (vu_short *) (info->start[sect]);
+ addr[0] = 0x0020;
+ addr[0] = 0x00D0;
+ while (!(addr[0] & 0x0080)); /* wait for error or finish */
+ if (addr[0] & 0x003A) /* check for error */
+ barf = addr[0] & 0x003A;
#endif
- if(barf) {
- printf("\nFlash error in sector at %lx\n",(unsigned long)addr);
- if(barf & 0x0002) printf("Block locked, not erased.\n");
- if((barf & 0x0030) == 0x0030)
- printf("Command Sequence error.\n");
- if((barf & 0x0030) == 0x0020)
- printf("Block Erase error.\n");
- if(barf & 0x0008) printf("Vpp Low error.\n");
- rcode = 1;
- } else printf(".");
- l_sect = sect;
+ if (barf) {
+ printf ("\nFlash error in sector at %lx\n",
+ (unsigned long) addr);
+ if (barf & 0x0002)
+ printf ("Block locked, not erased.\n");
+ if ((barf & 0x0030) == 0x0030)
+ printf ("Command Sequence error.\n");
+ if ((barf & 0x0030) == 0x0020)
+ printf ("Block Erase error.\n");
+ if (barf & 0x0008)
+ printf ("Vpp Low error.\n");
+ rcode = 1;
+ } else
+ printf (".");
+ l_sect = sect;
+ }
+ addr = (volatile FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+
}
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
}
-
- }
printf (" done\n");
return rcode;
}
@@ -1023,7 +1020,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
}
}
} else {
- while(!(addr[0] & 0x00800080)) { /* wait for error or finish */
+ while(!(addr[0] & 0x00800080)) { /* wait for error or finish */
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
return (1);
}
@@ -1091,7 +1088,7 @@ static int write_short (flash_info_t *info, ulong dest, ushort data)
} else {
/* intel stuff */
- while(!(addr[0] & 0x0080)){ /* wait for error or finish */
+ while(!(addr[0] & 0x0080)){ /* wait for error or finish */
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
}
@@ -1105,7 +1102,7 @@ static int write_short (flash_info_t *info, ulong dest, ushort data)
}
*addr = 0x00B0;
*addr = 0x0070;
- while(!(addr[0] & 0x0080)){ /* wait for error or finish */
+ while(!(addr[0] & 0x0080)){ /* wait for error or finish */
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
}
*addr = 0x00FF;
@@ -1113,8 +1110,6 @@ static int write_short (flash_info_t *info, ulong dest, ushort data)
return (0);
}
-
#endif
-/*-----------------------------------------------------------------------
- */
+/*-----------------------------------------------------------------------*/
diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds
index ba6f388..2410d5f 100644
--- a/board/snmc/qs860t/u-boot.lds
+++ b/board/snmc/qs860t/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds
index 7ab29ef..8c46e46 100644
--- a/board/spc1920/u-boot.lds
+++ b/board/spc1920/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds
index 16e2cd0..13b2908 100644
--- a/board/spd8xx/u-boot.lds
+++ b/board/spd8xx/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug
index 96c4e22..fd2245f 100644
--- a/board/spd8xx/u-boot.lds.debug
+++ b/board/spd8xx/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/stxgp3/u-boot.lds b/board/stxgp3/u-boot.lds
index 8c590b9..9cc4997 100644
--- a/board/stxgp3/u-boot.lds
+++ b/board/stxgp3/u-boot.lds
@@ -48,11 +48,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/stxssa/u-boot.lds b/board/stxssa/u-boot.lds
index 9381688..b0a9d68 100644
--- a/board/stxssa/u-boot.lds
+++ b/board/stxssa/u-boot.lds
@@ -48,11 +48,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/stxxtc/u-boot.lds b/board/stxxtc/u-boot.lds
index ea39cd9..f560189 100644
--- a/board/stxxtc/u-boot.lds
+++ b/board/stxxtc/u-boot.lds
@@ -28,15 +28,15 @@ SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
+ .interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
@@ -49,8 +49,8 @@ SECTIONS
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
- .plt : { *(.plt) }
- .text :
+ .plt : { *(.plt) }
+ .text :
{
cpu/mpc8xx/start.o (.text)
cpu/mpc8xx/traps.o (.text)
diff --git a/board/stxxtc/u-boot.lds.debug b/board/stxxtc/u-boot.lds.debug
index 80bcbfc..5bf1a66 100644
--- a/board/stxxtc/u-boot.lds.debug
+++ b/board/stxxtc/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds
index 35267dc..14ff179 100644
--- a/board/svm_sc8xx/u-boot.lds
+++ b/board/svm_sc8xx/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/svm_sc8xx/u-boot.lds.debug b/board/svm_sc8xx/u-boot.lds.debug
index 5cedcb1..0cd053a 100644
--- a/board/svm_sc8xx/u-boot.lds.debug
+++ b/board/svm_sc8xx/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index f32dadf..c8d4c67 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -118,7 +118,7 @@ void init_ide_reset (void)
{
debug ("init_ide_reset\n");
- /* Configure IRDA_1 (PSC6_3) as GPIO output for ATA reset */
+ /* Configure IRDA_1 (PSC6_3) as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_GPIO_ENABLE |= GPIO_IRDA_1;
*(vu_long *) MPC5XXX_GPIO_DIR |= GPIO_IRDA_1;
}
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index 27a6c41..7472ca9 100644
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -46,7 +46,7 @@
#define SM501_POWER_MODE0_GATE 0x00000040UL
#define SM501_POWER_MODE1_GATE 0x00000048UL
#define POWER_MODE_GATE_GPIO_PWM_I2C 0x00000040UL
-#define SM501_GPIO_DATA_LOW 0x00010000UL
+#define SM501_GPIO_DATA_LOW 0x00010000UL
#define SM501_GPIO_DATA_HIGH 0x00010004UL
#define SM501_GPIO_DATA_DIR_LOW 0x00010008UL
#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL
@@ -586,7 +586,7 @@ int do_led(char *argv[])
struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
- switch (simple_strtoul(argv[2], NULL, 10)) {
+ switch (simple_strtoul(argv[2], NULL, 10)) {
case 0:
if (strcmp (argv[3], "on") == 0) {
@@ -1000,7 +1000,7 @@ int do_rs232(char *argv[])
struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
- switch (simple_strtoul(argv[2], NULL, 10)) {
+ switch (simple_strtoul(argv[2], NULL, 10)) {
case 1:
/* check RTS <-> CTS loop */
diff --git a/board/tqm8260/tqm8260.c b/board/tqm8260/tqm8260.c
index 029863b..736c410 100644
--- a/board/tqm8260/tqm8260.c
+++ b/board/tqm8260/tqm8260.c
@@ -304,7 +304,7 @@ long int initdram (int board_type)
ulong start = memctl->memc_ ## brX & 0xFFFF8000; \
ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF; \
printf ("\n" \
- #brX " 0x%08x " #orX " 0x%08x " \
+ #brX " 0x%08x " #orX " 0x%08x " \
"==> 0x%08lx ... 0x%08lx = %ld MB\n", \
memctl->memc_ ## brX, memctl->memc_ ## orX, \
start, start+sizem, (sizem+1)>>20); \
diff --git a/board/tqm834x/pci.c b/board/tqm834x/pci.c
index d896f17..e3d0309 100644
--- a/board/tqm834x/pci.c
+++ b/board/tqm834x/pci.c
@@ -37,7 +37,7 @@
static struct pci_config_table pci_tqm834x_config_table[] = {
{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+ pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
}
diff --git a/board/tqm8xx/u-boot.lds b/board/tqm8xx/u-boot.lds
index 7ab29ef..8c46e46 100644
--- a/board/tqm8xx/u-boot.lds
+++ b/board/tqm8xx/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/tqm8xx/u-boot.lds.debug b/board/tqm8xx/u-boot.lds.debug
index 753411f..c33581d 100644
--- a/board/tqm8xx/u-boot.lds.debug
+++ b/board/tqm8xx/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/trab/lowlevel_init.S b/board/trab/lowlevel_init.S
index 128ae7e..bc7142a 100644
--- a/board/trab/lowlevel_init.S
+++ b/board/trab/lowlevel_init.S
@@ -128,7 +128,7 @@
#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
#define Trp 0x0 /* 2 clk */
#define Trc 0x3 /* 7 clk */
-#define Tchr 0x2 /* 3 clk */
+#define Tchr 0x2 /* 3 clk */
#ifdef CONFIG_TRAB_50MHZ
#define REFCNT 1269 /* period=15.6 us, HCLK=50Mhz, (2048+1-15.6*50) */
diff --git a/board/trab/memory.c b/board/trab/memory.c
index 58bd995..8614be7 100644
--- a/board/trab/memory.c
+++ b/board/trab/memory.c
@@ -282,7 +282,7 @@ static int memory_post_addrline(ulong *testaddr, ulong *base, ulong size)
#endif
if(readback == *testaddr) {
printf ("Memory (address line) error at %08lx<->%08lx, "
- "XOR value %08lx !\n",
+ "XOR value %08lx !\n",
(ulong)testaddr, (ulong)target,
xor);
ret = -1;
diff --git a/board/trab/trab.c b/board/trab/trab.c
index d8a726b..b869023 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -89,7 +89,7 @@ int board_init ()
gpio->PBCON = 0xaaaaaaaa;
gpio->PBUP = 0xffff;
/* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0] */
- /* 00, 10, 10, 10, 10, 10, 10 */
+ /* 00, 10, 10, 10, 10, 10, 10 */
gpio->PFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10);
#ifdef CONFIG_HWFLOW
/* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */
@@ -130,7 +130,7 @@ int board_init ()
#ifdef CONFIG_DRIVER_S3C24X0_I2C
/* Configure I/O ports PG5 und PG6 for I2C */
- gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00;
+ gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00;
#endif /* CONFIG_DRIVER_S3C24X0_I2C */
return 0;
@@ -321,9 +321,9 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(
- kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
- NULL
+ kbd, 1, 1, do_kbd,
+ "kbd - read keyboard status\n",
+ NULL
);
#ifdef CONFIG_MODEM_SUPPORT
@@ -356,7 +356,7 @@ static void spi_init(void)
int i;
/* Configure I/O ports. */
- gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
+ gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000;
gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000;
gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000;
diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h
index aac9c0c..af1b644 100644
--- a/board/trab/tsc2000.h
+++ b/board/trab/tsc2000.h
@@ -29,45 +29,45 @@
#define _TSC2000_H_
/* temperature channel multiplexer definitions */
-#define CON_MUX0 (gpio->PCCON = (gpio->PCCON & 0x0FFFFFCFF) | 0x00000100)
-#define CLR_MUX0 (gpio->PCDAT &= 0x0FFEF)
-#define SET_MUX0 (gpio->PCDAT |= 0x00010)
+#define CON_MUX0 (gpio->PCCON = (gpio->PCCON & 0x0FFFFFCFF) | 0x00000100)
+#define CLR_MUX0 (gpio->PCDAT &= 0x0FFEF)
+#define SET_MUX0 (gpio->PCDAT |= 0x00010)
-#define CON_MUX1 (gpio->PCCON = (gpio->PCCON & 0x0FFFFF3FF) | 0x00000400)
-#define CLR_MUX1 (gpio->PCDAT &= 0x0FFDF)
-#define SET_MUX1 (gpio->PCDAT |= 0x00020)
+#define CON_MUX1 (gpio->PCCON = (gpio->PCCON & 0x0FFFFF3FF) | 0x00000400)
+#define CLR_MUX1 (gpio->PCDAT &= 0x0FFDF)
+#define SET_MUX1 (gpio->PCDAT |= 0x00020)
-#define CON_MUX1_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFFCFFF) | 0x00001000)
-#define CLR_MUX1_ENABLE (gpio->PCDAT |= 0x00040)
-#define SET_MUX1_ENABLE (gpio->PCDAT &= 0x0FFBF)
+#define CON_MUX1_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFFCFFF) | 0x00001000)
+#define CLR_MUX1_ENABLE (gpio->PCDAT |= 0x00040)
+#define SET_MUX1_ENABLE (gpio->PCDAT &= 0x0FFBF)
-#define CON_MUX2_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFF3FFF) | 0x00004000)
-#define CLR_MUX2_ENABLE (gpio->PCDAT |= 0x00080)
-#define SET_MUX2_ENABLE (gpio->PCDAT &= 0x0FF7F)
+#define CON_MUX2_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFF3FFF) | 0x00004000)
+#define CLR_MUX2_ENABLE (gpio->PCDAT |= 0x00080)
+#define SET_MUX2_ENABLE (gpio->PCDAT &= 0x0FF7F)
-#define CON_MUX3_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFCFFFF) | 0x00010000)
-#define CLR_MUX3_ENABLE (gpio->PCDAT |= 0x00100)
-#define SET_MUX3_ENABLE (gpio->PCDAT &= 0x0FEFF)
+#define CON_MUX3_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFCFFFF) | 0x00010000)
+#define CLR_MUX3_ENABLE (gpio->PCDAT |= 0x00100)
+#define SET_MUX3_ENABLE (gpio->PCDAT &= 0x0FEFF)
-#define CON_MUX4_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFF3FFFF) | 0x00040000)
-#define CLR_MUX4_ENABLE (gpio->PCDAT |= 0x00200)
-#define SET_MUX4_ENABLE (gpio->PCDAT &= 0x0FDFF)
+#define CON_MUX4_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFF3FFFF) | 0x00040000)
+#define CLR_MUX4_ENABLE (gpio->PCDAT |= 0x00200)
+#define SET_MUX4_ENABLE (gpio->PCDAT &= 0x0FDFF)
-#define CON_SEL_TEMP_V_0 (gpio->PCCON = (gpio->PCCON & 0x0FFCFFFFF) | 0x00100000)
-#define CLR_SEL_TEMP_V_0 (gpio->PCDAT &= 0x0FBFF)
-#define SET_SEL_TEMP_V_0 (gpio->PCDAT |= 0x00400)
+#define CON_SEL_TEMP_V_0 (gpio->PCCON = (gpio->PCCON & 0x0FFCFFFFF) | 0x00100000)
+#define CLR_SEL_TEMP_V_0 (gpio->PCDAT &= 0x0FBFF)
+#define SET_SEL_TEMP_V_0 (gpio->PCDAT |= 0x00400)
-#define CON_SEL_TEMP_V_1 (gpio->PCCON = (gpio->PCCON & 0x0FF3FFFFF) | 0x00400000)
-#define CLR_SEL_TEMP_V_1 (gpio->PCDAT &= 0x0F7FF)
-#define SET_SEL_TEMP_V_1 (gpio->PCDAT |= 0x00800)
+#define CON_SEL_TEMP_V_1 (gpio->PCCON = (gpio->PCCON & 0x0FF3FFFFF) | 0x00400000)
+#define CLR_SEL_TEMP_V_1 (gpio->PCDAT &= 0x0F7FF)
+#define SET_SEL_TEMP_V_1 (gpio->PCDAT |= 0x00800)
-#define CON_SEL_TEMP_V_2 (gpio->PCCON = (gpio->PCCON & 0x0FCFFFFFF) | 0x01000000)
-#define CLR_SEL_TEMP_V_2 (gpio->PCDAT &= 0x0EFFF)
-#define SET_SEL_TEMP_V_2 (gpio->PCDAT |= 0x01000)
+#define CON_SEL_TEMP_V_2 (gpio->PCCON = (gpio->PCCON & 0x0FCFFFFFF) | 0x01000000)
+#define CLR_SEL_TEMP_V_2 (gpio->PCDAT &= 0x0EFFF)
+#define SET_SEL_TEMP_V_2 (gpio->PCDAT |= 0x01000)
-#define CON_SEL_TEMP_V_3 (gpio->PCCON = (gpio->PCCON & 0x0F3FFFFFF) | 0x04000000)
-#define CLR_SEL_TEMP_V_3 (gpio->PCDAT &= 0x0DFFF)
-#define SET_SEL_TEMP_V_3 (gpio->PCDAT |= 0x02000)
+#define CON_SEL_TEMP_V_3 (gpio->PCCON = (gpio->PCCON & 0x0F3FFFFFF) | 0x04000000)
+#define CLR_SEL_TEMP_V_3 (gpio->PCDAT &= 0x0DFFF)
+#define SET_SEL_TEMP_V_3 (gpio->PCDAT |= 0x02000)
/* TSC2000 register definition */
#define TSC2000_REG_X ((0 << 11) | (0 << 5))
@@ -89,21 +89,21 @@
#define TSC2000_REG_CONFIG ((1 << 11) | (5 << 5))
/* bit definition of TSC2000 ADC register */
-#define TC_PSM (1 << 15)
-#define TC_STS (1 << 14)
-#define TC_AD3 (1 << 13)
-#define TC_AD2 (1 << 12)
-#define TC_AD1 (1 << 11)
-#define TC_AD0 (1 << 10)
-#define TC_RS1 (1 << 9)
-#define TC_RS0 (1 << 8)
-#define TC_AV1 (1 << 7)
-#define TC_AV0 (1 << 6)
-#define TC_CL1 (1 << 5)
-#define TC_CL0 (1 << 4)
-#define TC_PV2 (1 << 3)
-#define TC_PV1 (1 << 2)
-#define TC_PV0 (1 << 1)
+#define TC_PSM (1 << 15)
+#define TC_STS (1 << 14)
+#define TC_AD3 (1 << 13)
+#define TC_AD2 (1 << 12)
+#define TC_AD1 (1 << 11)
+#define TC_AD0 (1 << 10)
+#define TC_RS1 (1 << 9)
+#define TC_RS0 (1 << 8)
+#define TC_AV1 (1 << 7)
+#define TC_AV0 (1 << 6)
+#define TC_CL1 (1 << 5)
+#define TC_CL0 (1 << 4)
+#define TC_PV2 (1 << 3)
+#define TC_PV1 (1 << 2)
+#define TC_PV0 (1 << 1)
/* default value for TSC2000 ADC register for use with touch functions */
#define DEFAULT_ADC (TC_PV1 | TC_AV0 | TC_AV1 | TC_RS0)
@@ -111,8 +111,7 @@
#define TSC2000_DELAY_BASE 500
#define TSC2000_NO_SENSOR -0x10000
-#define ERROR_BATTERY 220 /* must be adjusted, if R68 is changed on
- * TRAB */
+#define ERROR_BATTERY 220 /* must be adjusted, if R68 is changed on TRAB */
void tsc2000_write(unsigned short, unsigned short);
unsigned short tsc2000_read (unsigned short);
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index b6798fd..eb506f3 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -104,7 +104,7 @@ void init_grid_ctrl(void)
bit = grid_cycle * 256 * 4 +
(grid_cycle + 200) * 4 +
frame_buf_offs + display;
- /* wrap arround if offset (see manual S3C2400) */
+ /* wrap arround if offset (see manual S3C2400) */
if (bit>=FRAME_BUF_SIZE*8)
bit = bit - (FRAME_BUF_SIZE * 8);
adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8);
@@ -117,7 +117,7 @@ void init_grid_ctrl(void)
if(grid_cycle<55)
bit = grid_cycle*256*4+(grid_cycle+201)*4+frame_buf_offs+display;
else
- bit = grid_cycle*256*4+200*4+frame_buf_offs+display-4; /* grid nr. 0 */
+ bit = grid_cycle*256*4+200*4+frame_buf_offs+display-4; /* grid nr. 0 */
/* wrap arround if offset (see manual S3C2400) */
if (bit>=FRAME_BUF_SIZE*8)
bit = bit-(FRAME_BUF_SIZE*8);
@@ -190,7 +190,7 @@ void create_vfd_table(void)
/* Display 0 red pixels */
vfd_table[x][y][1][display][0] =
(x==0) ? y*16+512+display
- : (x%4)*4+y*16+((x-1)/2)*1024+512+display;
+ : (x%4)*4+y*16+((x-1)/2)*1024+512+display;
}
}
}
@@ -488,7 +488,7 @@ int drv_vfd_init(void)
lcd->LCDCON1 = 0x00000000;
/* frame buffer startadr */
lcd->LCDSADDR1 = gd->fb_base >> 1;
- /* frame buffer endadr */
+ /* frame buffer endadr */
lcd->LCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
lcd->LCDSADDR3 = ((256/4));
lcd->LCDCON2 = 0x000DC000;
diff --git a/board/uc100/u-boot.lds b/board/uc100/u-boot.lds
index 2554abc..db29342 100644
--- a/board/uc100/u-boot.lds
+++ b/board/uc100/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/uc100/u-boot.lds.debug b/board/uc100/u-boot.lds.debug
index 5aede10..25702a5 100644
--- a/board/uc100/u-boot.lds.debug
+++ b/board/uc100/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/uc100/uc100.c b/board/uc100/uc100.c
index 4f2cff6..a5dd95d 100644
--- a/board/uc100/uc100.c
+++ b/board/uc100/uc100.c
@@ -188,7 +188,7 @@ long int initdram (int board_type)
memctl->memc_mptpr = 0x0200; /* Divide by 32 WV */
memctl->memc_mamr = CFG_MAMR_VAL & 0xFF7FFFFF; /* Bit 8 := "0" Kein Refresh WV */
- memctl->memc_mbmr = CFG_MBMR_VAL;
+ memctl->memc_mbmr = CFG_MBMR_VAL;
/*---------------------------------------------------------------------*/
/* Initialize the Memory Controller registers, MPTPR, Chip Select 1 */
diff --git a/board/utx8245/flash.c b/board/utx8245/flash.c
index 3271827..199f619 100644
--- a/board/utx8245/flash.c
+++ b/board/utx8245/flash.c
@@ -46,7 +46,7 @@
#endif
#define FLASH_BANK_SIZE ((uint)(16 * 1024 * 1024)) /* max 16Mbyte */
-#define MAIN_SECT_SIZE 0x10000
+#define MAIN_SECT_SIZE 0x10000
#define SECT_SIZE_32KB 0x8000
#define SECT_SIZE_8KB 0x2000
diff --git a/board/v37/flash.c b/board/v37/flash.c
index 6a31972..d845f65 100644
--- a/board/v37/flash.c
+++ b/board/v37/flash.c
@@ -31,7 +31,7 @@
* are not tested.
*
* (?) Does an RPXLite board which
- * does not use AM29LV800 flash memory exist ?
+ * does not use AM29LV800 flash memory exist ?
* I don't know...
*/
diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds
index 8253a25..7bcf061 100644
--- a/board/v37/u-boot.lds
+++ b/board/v37/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/v37/v37.c b/board/v37/v37.c
index 1ef879d..2e47573 100644
--- a/board/v37/v37.c
+++ b/board/v37/v37.c
@@ -38,8 +38,8 @@ static long int dram_size (void);
/* ------------------------------------------------------------------------- */
-#define MBYTE (1024*1024)
-#define DRAM_DELAY 0x00000379 /* DRAM delay count */
+#define MBYTE (1024*1024)
+#define DRAM_DELAY 0x00000379 /* DRAM delay count */
#define _NOT_USED_ 0xFFFFCC25
const uint sdram_table[] =
diff --git a/board/versatile/flash.c b/board/versatile/flash.c
index 7153371..ca77c8a 100644
--- a/board/versatile/flash.c
+++ b/board/versatile/flash.c
@@ -92,7 +92,7 @@ static void flash_vpp(int on)
if (on)
tmp |= VERSATILE_FLASHPROG_FLVPPEN;
else
- tmp &= ~VERSATILE_FLASHPROG_FLVPPEN;
+ tmp &= ~VERSATILE_FLASHPROG_FLVPPEN;
*(unsigned int *)(VERSATILE_FLASHCTRL) = tmp;
}
diff --git a/board/versatile/versatile.c b/board/versatile/versatile.c
index 9d1a25e..3b9b020 100644
--- a/board/versatile/versatile.c
+++ b/board/versatile/versatile.c
@@ -104,7 +104,7 @@ void flash__init (void)
/*************************************************************
Routine:ether__init
Description: take the Ethernet controller out of reset and wait
- for the EEPROM load to complete.
+ for the EEPROM load to complete.
*************************************************************/
void ether__init (void)
{
diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S
index 78cd2b6..cc50e8c 100644
--- a/board/voiceblue/setup.S
+++ b/board/voiceblue/setup.S
@@ -273,7 +273,7 @@ ulocking:
mov r0, #0x4000
sdelay:
subs r0, r0, #0x1
- bne sdelay
+ bne sdelay
/* back to arch calling code */
mov pc, lr
diff --git a/board/w7o/post1.S b/board/w7o/post1.S
index 21d206e..a6f46c8 100644
--- a/board/w7o/post1.S
+++ b/board/w7o/post1.S
@@ -62,7 +62,7 @@
* Switch to .data section.
*/
.section ".data"
-err_str: .asciz "*** POST ERROR = "
+err_str: .asciz "*** POST ERROR = "
warn_str: .asciz "*** POST WARNING = "
end_str: .asciz "\r\n"
@@ -93,7 +93,7 @@ test_led:
stw r0, +16(r1) /* Save link register */
stw r4, +8(r1) /* save R4 */
- WATCHDOG_RESET /* Reset the watchdog */
+ WATCHDOG_RESET /* Reset the watchdog */
addi r3, 0, ERR_FF /* first test value is ffff */
addi r4, r3, 0 /* save copy of pattern */
@@ -155,7 +155,7 @@ l2_loop:
addi r31, r3, 0 /* save original size */
/* now kick the dog and test the mem */
- WATCHDOG_RESET /* Reset the watchdog */
+ WATCHDOG_RESET /* Reset the watchdog */
bl Data_Buster /* test crossed/shorted data lines */
addi r3, r30, 0 /* get log2(memsize) */
addi r4, r31, 0 /* get memsize */
@@ -257,7 +257,7 @@ clr_loop:
addi r28, r28, 4 /* Increment to next word */
andi. r27, r28, 0xffff /* check for 2^16 loops */
bne clr_skip /* if not there, then skip */
- WATCHDOG_RESET /* kick the dog every now and then */
+ WATCHDOG_RESET /* kick the dog every now and then */
clr_skip:
bdnz clr_loop /* Round and round... */
@@ -272,7 +272,7 @@ outside:
* thus the sequence 0,1,2,4,8,..,2^(n-1)
* setting the bit is done with the following shift functions.
*/
- WATCHDOG_RESET /* Reset the watchdog */
+ WATCHDOG_RESET /* Reset the watchdog */
addi r31, 0, 1 /* r31 = 1 */
slw r28, r31, r30 /* set bit coresponding to loop cnt */
@@ -301,20 +301,20 @@ inside:
bne Casper /* we found a ghost! */
/* now close ghost ( inner ) loop */
- addi r29, r29, 1 /* increment inner loop counter */
- cmpw r29, r26 /* check for last inner loop */
+ addi r29, r29, 1 /* increment inner loop counter */
+ cmpw r29, r26 /* check for last inner loop */
blt inside /* do more inner loops */
/* now close referance ( outer ) loop */
- addi r31, 0, 0 /* r31 = zero */
+ addi r31, 0, 0 /* r31 = zero */
stb r31, 0(28) /* zero out the altered address loc. */
/*
* Increment and check for end, count is zero based.
* With the ble, this gives us one more loops than
* address bits for sequence 0,1,2,4,8,...2^(n-1)
*/
- addi r30, r30, 1 /* increment outer loop counter */
- cmpw r30, r26 /* check for last inner loop */
+ addi r30, r30, 1 /* increment outer loop counter */
+ cmpw r30, r26 /* check for last inner loop */
ble outside /* do more outer loops */
/* were done, lets go home */
@@ -391,7 +391,7 @@ fill_test:
mr r28, r4
mr r29, r5
- WATCHDOG_RESET /* Reset the watchdog */
+ WATCHDOG_RESET /* Reset the watchdog */
/* first fill memory with Value */
srawi r31, r29, 2 /* convert bytes to longs */
@@ -401,10 +401,10 @@ ft_0: stw r28, 0(r30) /* Store value */
addi r30, r30, 4 /* Increment to next word */
andi. r31, r30, 0xffff /* check for 2^16 loops */
bne ft_0a /* if not there, then skip */
- WATCHDOG_RESET /* kick the dog every now and then */
+ WATCHDOG_RESET /* kick the dog every now and then */
ft_0a: bdnz ft_0 /* Round and round... */
- WATCHDOG_RESET /* Reset the watchdog */
+ WATCHDOG_RESET /* Reset the watchdog */
/* Now confirm Value is in memory */
srawi r31, r29, 2 /* convert bytes to longs */
@@ -419,7 +419,7 @@ ft_1: lwz r31, 0(r30) /* get value from memory */
WATCHDOG_RESET /* kick the dog every now and then */
ft_1a: bdnz ft_1 /* Round and round... */
- WATCHDOG_RESET /* Reset the watchdog */
+ WATCHDOG_RESET /* Reset the watchdog */
b fill_done /* restore and return */
@@ -608,9 +608,9 @@ temp_uart_init:
/* output a few line feeds */
addi r3, 0, '\n' /* load line feed */
- bl post_putc /* output the char */
+ bl post_putc /* output the char */
addi r3, 0, '\n' /* load line feed */
- bl post_putc /* output the char */
+ bl post_putc /* output the char */
/* restore stack and return */
lwz r0, +12(r1) /* Get saved link register */
@@ -637,15 +637,15 @@ post_putc:
addis r31, 0, 0xef60 /* Point to uart base */
ori r31, r31, 0x0300
- addis r30, 0, 152 /* Load about 10,000,000 ticks. */
+ addis r30, 0, 152 /* Load about 10,000,000 ticks. */
pputc_lp:
- lbz r29, 5(r31) /* Read Line Status Register */
+ lbz r29, 5(r31) /* Read Line Status Register */
andi. r29, r29, 0x20 /* Check THRE status */
bne thre_set /* Branch if FIFO empty */
addic. r30, r30, -1 /* Decrement and check if empty. */
bne pputc_lp /* Try, try again */
addi r3, 0, -1 /* Load error code for timeout */
- b pputc_done /* Bail out with error code set */
+ b pputc_done /* Bail out with error code set */
thre_set:
stb r3, 0(r31) /* Store character to UART */
addi r3, 0, 0 /* clear error code */
@@ -671,7 +671,7 @@ post_puts:
stw r0, +16(r1) /* Save link register */
stw r31, 8(r1) /* save r31 - char pointer */
- addi r31, r3, 0 /* move pointer to R31 */
+ addi r31, r3, 0 /* move pointer to R31 */
pputs_nxt:
lbz r3, 0(r31) /* Get next character */
addic. r3, r3, 0 /* Check for zero */
@@ -679,13 +679,13 @@ pputs_nxt:
bl post_putc /* output the char */
addic. r3, r3, 0 /* check for error */
bne pputs_err
- addi r31, r31, 1 /* point to next char */
- b pputs_nxt /* loop till term */
+ addi r31, r31, 1 /* point to next char */
+ b pputs_nxt /* loop till term */
pputs_err:
- addi r3, 0, -1 /* set error code */
+ addi r3, 0, -1 /* set error code */
b pputs_end /* were outa here */
pputs_term:
- addi r3, 0, 1 /* set success code */
+ addi r3, 0, 1 /* set success code */
/* restore stack and return */
pputs_end:
lwz r31, 8(r1) /* restore r27 - r31 from stack */
@@ -711,20 +711,20 @@ disp_hex:
stmw r30, 8(r1) /* save r30 - r31 on stack */
/* r31 output char */
/* r30 uart base address */
- addi r30, 0, 8 /* Go through 8 nibbles. */
- addi r31, r3, 0
+ addi r30, 0, 8 /* Go through 8 nibbles. */
+ addi r31, r3, 0
pputh_nxt:
rlwinm r31, r31, 4, 0, 31 /* Rotate next nibble into position */
- andi. r3, r31, 0x0f /* Get nibble. */
- addi r3, r3, 0x30 /* Add zero's ASCII code. */
+ andi. r3, r31, 0x0f /* Get nibble. */
+ addi r3, r3, 0x30 /* Add zero's ASCII code. */
cmpwi r3, 0x03a
blt pputh_out
- addi r3, r3, 0x07 /* 0x27 for lower case. */
+ addi r3, r3, 0x07 /* 0x27 for lower case. */
pputh_out:
- cmpw r30, r4
+ cmpw r30, r4
bgt pputh_skip
bl post_putc
- addic. r3, r3, 0 /* check for error */
+ addic. r3, r3, 0 /* check for error */
bne pputh_err
pputh_skip:
addic. r30, r30, -1
@@ -732,7 +732,7 @@ pputh_skip:
xor r3, r3, r3 /* Clear error code */
b pputh_done
pputh_err:
- addi r3, 0, -1 /* set error code */
+ addi r3, 0, -1 /* set error code */
pputh_done:
/* restore stack and return */
lmw r30, 8(r1) /* restore r30 - r31 from stack */
diff --git a/board/w7o/u-boot.lds b/board/w7o/u-boot.lds
index c88bfd1..3373793 100644
--- a/board/w7o/u-boot.lds
+++ b/board/w7o/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug
index 834d68d..d3ffed3 100644
--- a/board/w7o/u-boot.lds.debug
+++ b/board/w7o/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/wepep250/lowlevel_init.S b/board/wepep250/lowlevel_init.S
index b172cea..9bb091f 100644
--- a/board/wepep250/lowlevel_init.S
+++ b/board/wepep250/lowlevel_init.S
@@ -41,9 +41,9 @@ lowlevel_init:
mov r10, lr
/* setup memory - see 6.12 in [1]
- * Step 1 - wait 200 us
+ * Step 1 - wait 200 us
*/
- mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */
+ mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */
1: subs r0, r0, #1
bne 1b
/* TODO: complete step 1 for Synchronous Static memory*/
@@ -51,7 +51,7 @@ lowlevel_init:
ldr r0, =0x48000000 /* MC_BASE */
-/* step 1.a - setup MSCx
+/* step 1.a - setup MSCx
*/
ldr r1, =0x000012B3 /* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */
str r1, [r0, #0x8] /* MSC0_OFFSET */
@@ -111,7 +111,7 @@ lowlevel_init:
/* Step 5 - wait at least 200 us for SDRAM
* see section B. in [2]
*/
- mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */
+ mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */
1: subs r2, r2, #1
bne 1b
diff --git a/board/westel/amx860/u-boot.lds b/board/westel/amx860/u-boot.lds
index ee598c2..10b38ec 100644
--- a/board/westel/amx860/u-boot.lds
+++ b/board/westel/amx860/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/westel/amx860/u-boot.lds.debug b/board/westel/amx860/u-boot.lds.debug
index 452c6c0..7a7a40c 100644
--- a/board/westel/amx860/u-boot.lds.debug
+++ b/board/westel/amx860/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/xilinx/common/xdma_channel.c b/board/xilinx/common/xdma_channel.c
index 3d5fc75..f816138 100644
--- a/board/xilinx/common/xdma_channel.c
+++ b/board/xilinx/common/xdma_channel.c
@@ -226,7 +226,7 @@ XDmaChannel_GetVersion(XDmaChannel * InstancePtr)
* XST_SUCCESS is returned if the self test is successful, or one of the
* following errors.
*
-* XST_DMA_RESET_REGISTER_ERROR Indicates the control register value
+* XST_DMA_RESET_REGISTER_ERROR Indicates the control register value
* after a reset was not correct
*
* NOTES:
@@ -475,7 +475,7 @@ XDmaChannel_GetStatus(XDmaChannel * InstancePtr)
* XDC_IXR_DMA_DONE_MASK The dma operation is done
* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
* XDC_IXR_PKT_DONE_MASK A packet is complete
-* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
+* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
* XDC_IXR_BD_MASK A buffer descriptor is done
@@ -533,7 +533,7 @@ XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status)
* XDC_IXR_DMA_DONE_MASK The dma operation is done
* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
* XDC_IXR_PKT_DONE_MASK A packet is complete
-* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
+* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
* XDC_IXR_SG_END_MASK Current descriptor was the end of the list
@@ -584,7 +584,7 @@ XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr)
* XDC_IXR_DMA_DONE_MASK The dma operation is done
* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
* XDC_IXR_PKT_DONE_MASK A packet is complete
-* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
+* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
* XDC_IXR_SG_END_MASK Current descriptor was the end of the list
@@ -638,7 +638,7 @@ XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable)
* XDC_IXR_DMA_DONE_MASK The dma operation is done
* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
* XDC_IXR_PKT_DONE_MASK A packet is complete
-* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
+* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
* XDC_IXR_BD_MASK A buffer descriptor is done
diff --git a/board/xilinx/common/xdma_channel.h b/board/xilinx/common/xdma_channel.h
index 06976c3..4685982 100644
--- a/board/xilinx/common/xdma_channel.h
+++ b/board/xilinx/common/xdma_channel.h
@@ -96,7 +96,7 @@
* 1. Create a scatter gather list for the DMA channel which puts empty buffer
* descriptors into the list.
* 2. Create buffer descriptors which describe the buffers to be filled with
-* receive data or the buffers which contain data to be sent.
+* receive data or the buffers which contain data to be sent.
* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
* gather operations are requested.
* 4. Commit the buffer descriptors in the list such that they are ready to be
@@ -208,7 +208,7 @@
#define XDC_IXR_DMA_DONE_MASK 0x1UL /* dma operation done */
#define XDC_IXR_DMA_ERROR_MASK 0x2UL /* dma operation error */
#define XDC_IXR_PKT_DONE_MASK 0x4UL /* packet done */
-#define XDC_IXR_PKT_THRESHOLD_MASK 0x8UL /* packet count threshold */
+#define XDC_IXR_PKT_THRESHOLD_MASK 0x8UL /* packet count threshold */
#define XDC_IXR_PKT_WAIT_BOUND_MASK 0x10UL /* packet wait bound reached */
#define XDC_IXR_SG_DISABLE_ACK_MASK 0x20UL /* scatter gather disable
acknowledge occurred */
diff --git a/board/xilinx/ml300/u-boot.lds b/board/xilinx/ml300/u-boot.lds
index 815d81d..2d32225 100644
--- a/board/xilinx/ml300/u-boot.lds
+++ b/board/xilinx/ml300/u-boot.lds
@@ -34,11 +34,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/xilinx/ml300/u-boot.lds.debug b/board/xilinx/ml300/u-boot.lds.debug
index 88dcaf9..0552994 100644
--- a/board/xilinx/ml300/u-boot.lds.debug
+++ b/board/xilinx/ml300/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/xpedite1k/u-boot.lds b/board/xpedite1k/u-boot.lds
index 044511b..70b1e38 100644
--- a/board/xpedite1k/u-boot.lds
+++ b/board/xpedite1k/u-boot.lds
@@ -43,11 +43,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/xpedite1k/u-boot.lds.debug b/board/xpedite1k/u-boot.lds.debug
index e0e20ca..e0da854 100644
--- a/board/xpedite1k/u-boot.lds.debug
+++ b/board/xpedite1k/u-boot.lds.debug
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/xsengine/lowlevel_init.S b/board/xsengine/lowlevel_init.S
index 309faab..b0b1561 100644
--- a/board/xsengine/lowlevel_init.S
+++ b/board/xsengine/lowlevel_init.S
@@ -109,7 +109,7 @@ lowlevel_init:
ldr r3, =OSCR /* reset the OS Timer Count to zero */
mov r2, #0
str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, so 0x300 should be plenty */
+ ldr r4, =0x300 /* really 0x2E1 is about 200usec, so 0x300 should be plenty */
1:
ldr r2, [r3]
cmp r4, r2
@@ -144,7 +144,7 @@ mem_init:
ldr r3, =OSCR /* reset the OS Timer Count to zero */
mov r2, #0
str r2, [r3]
- ldr r4, =0x300 /* about 200 usec */
+ ldr r4, =0x300 /* about 200 usec */
1:
ldr r2, [r3]
cmp r4, r2
diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds
index 670c943..d803625 100644
--- a/board/zeus/u-boot.lds
+++ b/board/zeus/u-boot.lds
@@ -38,11 +38,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/common/cmd_autoscript.c b/common/cmd_autoscript.c
index 932f638..13af93e 100644
--- a/common/cmd_autoscript.c
+++ b/common/cmd_autoscript.c
@@ -52,7 +52,7 @@
int
autoscript (ulong addr, const char *fit_uname)
{
- ulong len;
+ ulong len;
image_header_t *hdr;
ulong *data;
char *cmd;
diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c
index a053343..439d07a 100644
--- a/common/cmd_dcr.c
+++ b/common/cmd_dcr.c
@@ -123,7 +123,7 @@ int do_getidcr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (argc < 3) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
- }
+ }
/* Find out whether ther is '.' (dot) symbol in the first parameter. */
strncpy (buf, argv[1], sizeof(buf)-1);
diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c
index bf28370..0293d18 100644
--- a/common/cmd_fdc.c
+++ b/common/cmd_fdc.c
@@ -46,24 +46,23 @@
#define FALSE 0
#endif
-
/*#if defined(CONFIG_CMD_DATE) */
/*#include <rtc.h> */
/*#endif */
#if defined(CONFIG_CMD_FDC) || defined(CONFIG_CMD_FDOS)
-
typedef struct {
- int flags; /* connected drives ect */
- unsigned long blnr; /* Logical block nr */
- uchar drive; /* drive no */
- uchar cmdlen; /* cmd length */
- uchar cmd[16]; /* cmd desc */
- uchar dma; /* if > 0 dma enabled */
- uchar result[11];/* status information */
- uchar resultlen; /* lenght of result */
+ int flags; /* connected drives ect */
+ unsigned long blnr; /* Logical block nr */
+ uchar drive; /* drive no */
+ uchar cmdlen; /* cmd length */
+ uchar cmd[16]; /* cmd desc */
+ uchar dma; /* if > 0 dma enabled */
+ uchar result[11]; /* status information */
+ uchar resultlen; /* lenght of result */
} FDC_COMMAND_STRUCT;
+
/* flags: only the lower 8bit used:
* bit 0 if set drive 0 is present
* bit 1 if set drive 1 is present
@@ -75,31 +74,30 @@ typedef struct {
* bit 7 if set disk in drive 4 is inserted
*/
-
/* cmd indexes */
-#define COMMAND 0
-#define DRIVE 1
+#define COMMAND 0
+#define DRIVE 1
#define CONFIG0 1
-#define SPEC_HUTSRT 1
-#define TRACK 2
+#define SPEC_HUTSRT 1
+#define TRACK 2
#define CONFIG1 2
#define SPEC_HLT 2
-#define HEAD 3
+#define HEAD 3
#define CONFIG2 3
-#define SECTOR 4
-#define SECTOR_SIZE 5
-#define LAST_TRACK 6
-#define GAP 7
-#define DTL 8
+#define SECTOR 4
+#define SECTOR_SIZE 5
+#define LAST_TRACK 6
+#define GAP 7
+#define DTL 8
/* result indexes */
-#define STATUS_0 0
-#define STATUS_PCN 1
-#define STATUS_1 1
-#define STATUS_2 2
-#define STATUS_TRACK 3
-#define STATUS_HEAD 4
-#define STATUS_SECT 5
-#define STATUS_SECT_SIZE 6
+#define STATUS_0 0
+#define STATUS_PCN 1
+#define STATUS_1 1
+#define STATUS_2 2
+#define STATUS_TRACK 3
+#define STATUS_HEAD 4
+#define STATUS_SECT 5
+#define STATUS_SECT_SIZE 6
/* Register addresses */
@@ -114,34 +112,34 @@ typedef struct {
#define FDC_DIR FDC_BASE + 6 /* Digital Input Register */
#define FDC_CCR FDC_BASE + 7 /* Configuration Control */
/* Commands */
-#define FDC_CMD_SENSE_INT 0x08
-#define FDC_CMD_CONFIGURE 0x13
-#define FDC_CMD_SPECIFY 0x03
-#define FDC_CMD_RECALIBRATE 0x07
-#define FDC_CMD_READ 0x06
-#define FDC_CMD_READ_TRACK 0x02
-#define FDC_CMD_READ_ID 0x0A
-#define FDC_CMD_DUMP_REG 0x0E
-#define FDC_CMD_SEEK 0x0F
-
-#define FDC_CMD_SENSE_INT_LEN 0x01
-#define FDC_CMD_CONFIGURE_LEN 0x04
-#define FDC_CMD_SPECIFY_LEN 0x03
-#define FDC_CMD_RECALIBRATE_LEN 0x02
-#define FDC_CMD_READ_LEN 0x09
-#define FDC_CMD_READ_TRACK_LEN 0x09
-#define FDC_CMD_READ_ID_LEN 0x02
-#define FDC_CMD_DUMP_REG_LEN 0x01
-#define FDC_CMD_SEEK_LEN 0x03
-
-#define FDC_FIFO_THR 0x0C
-#define FDC_FIFO_DIS 0x00
+#define FDC_CMD_SENSE_INT 0x08
+#define FDC_CMD_CONFIGURE 0x13
+#define FDC_CMD_SPECIFY 0x03
+#define FDC_CMD_RECALIBRATE 0x07
+#define FDC_CMD_READ 0x06
+#define FDC_CMD_READ_TRACK 0x02
+#define FDC_CMD_READ_ID 0x0A
+#define FDC_CMD_DUMP_REG 0x0E
+#define FDC_CMD_SEEK 0x0F
+
+#define FDC_CMD_SENSE_INT_LEN 0x01
+#define FDC_CMD_CONFIGURE_LEN 0x04
+#define FDC_CMD_SPECIFY_LEN 0x03
+#define FDC_CMD_RECALIBRATE_LEN 0x02
+#define FDC_CMD_READ_LEN 0x09
+#define FDC_CMD_READ_TRACK_LEN 0x09
+#define FDC_CMD_READ_ID_LEN 0x02
+#define FDC_CMD_DUMP_REG_LEN 0x01
+#define FDC_CMD_SEEK_LEN 0x03
+
+#define FDC_FIFO_THR 0x0C
+#define FDC_FIFO_DIS 0x00
#define FDC_IMPLIED_SEEK 0x01
-#define FDC_POLL_DIS 0x00
-#define FDC_PRE_TRK 0x00
-#define FDC_CONFIGURE FDC_FIFO_THR | (FDC_POLL_DIS<<4) | (FDC_FIFO_DIS<<5) | (FDC_IMPLIED_SEEK << 6)
-#define FDC_MFM_MODE 0x01 /* MFM enable */
-#define FDC_SKIP_MODE 0x00 /* skip enable */
+#define FDC_POLL_DIS 0x00
+#define FDC_PRE_TRK 0x00
+#define FDC_CONFIGURE FDC_FIFO_THR | (FDC_POLL_DIS<<4) | (FDC_FIFO_DIS<<5) | (FDC_IMPLIED_SEEK << 6)
+#define FDC_MFM_MODE 0x01 /* MFM enable */
+#define FDC_SKIP_MODE 0x00 /* skip enable */
#define FDC_TIME_OUT 100000 /* time out */
#define FDC_RW_RETRIES 3 /* read write retries */
@@ -150,18 +148,18 @@ typedef struct {
/* Disk structure */
typedef struct {
- unsigned int size; /* nr of sectors total */
- unsigned int sect; /* sectors per track */
- unsigned int head; /* nr of heads */
- unsigned int track; /* nr of tracks */
- unsigned int stretch; /* !=0 means double track steps */
- unsigned char gap; /* gap1 size */
- unsigned char rate; /* data rate. |= 0x40 for perpendicular */
- unsigned char spec1; /* stepping rate, head unload time */
- unsigned char fmt_gap; /* gap2 size */
- unsigned char hlt; /* head load time */
- unsigned char sect_code; /* Sector Size code */
- const char * name; /* used only for predefined formats */
+ unsigned int size; /* nr of sectors total */
+ unsigned int sect; /* sectors per track */
+ unsigned int head; /* nr of heads */
+ unsigned int track; /* nr of tracks */
+ unsigned int stretch; /* !=0 means double track steps */
+ unsigned char gap; /* gap1 size */
+ unsigned char rate; /* data rate. |= 0x40 for perpendicular */
+ unsigned char spec1; /* stepping rate, head unload time */
+ unsigned char fmt_gap;/* gap2 size */
+ unsigned char hlt; /* head load time */
+ unsigned char sect_code;/* Sector Size code */
+ const char * name; /* used only for predefined formats */
} FD_GEO_STRUCT;
@@ -342,7 +340,7 @@ int fdc_issue_cmd(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
case FDC_CMD_CONFIGURE:
pCMD->cmd[CONFIG0]=0;
pCMD->cmd[CONFIG1]=FDC_CONFIGURE; /* FIFO Threshold, Poll, Enable FIFO */
- pCMD->cmd[CONFIG2]=FDC_PRE_TRK; /* Precompensation Track */
+ pCMD->cmd[CONFIG2]=FDC_PRE_TRK; /* Precompensation Track */
pCMD->cmdlen=FDC_CMD_CONFIGURE_LEN;
pCMD->resultlen=0; /* no result */
break;
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 7436a95..ede65ae 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -464,13 +464,13 @@ static int fdt_valid(void)
/*
* Parse the user's input, partially heuristic. Valid formats:
* <0x00112233 4 05> - an array of cells. Numbers follow standard
- * C conventions.
+ * C conventions.
* [00 11 22 .. nn] - byte stream
* "string" - If the the value doesn't start with "<" or "[", it is
* treated as a string. Note that the quotes are
* stripped by the parser before we get the string.
* newval: An array of strings containing the new property as specified
- * on the command line
+ * on the command line
* count: The number of strings in the array
* data: A bytestream to be placed in the property
* len: The length of the resulting bytestream
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c60ec99..aac7e9a 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -266,8 +266,8 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
/*
- * Chip is always specified.
- */
+ * Chip is always specified.
+ */
chip = simple_strtoul(argv[1], NULL, 16);
/*
@@ -353,8 +353,8 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
/*
- * Chip is always specified.
- */
+ * Chip is always specified.
+ */
chip = simple_strtoul(argv[1], NULL, 16);
/*
@@ -444,8 +444,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
size = cmd_get_data_size(argv[0], 1);
/*
- * Chip is always specified.
- */
+ * Chip is always specified.
+ */
chip = simple_strtoul(argv[1], NULL, 16);
/*
@@ -1256,7 +1256,7 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
#if defined(CONFIG_I2C_CMD_TREE)
U_BOOT_CMD(
i2c, 6, 1, do_i2c,
- "i2c - I2C sub-system\n",
+ "i2c - I2C sub-system\n",
#if defined(CONFIG_I2C_MULTI_BUS)
"dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
@@ -1280,7 +1280,7 @@ U_BOOT_CMD(
);
U_BOOT_CMD(
- imm, 3, 1, do_i2c_mm,
+ imm, 3, 1, do_i2c_mm,
"imm - i2c memory modify (auto-incrementing)\n",
"chip address[.0, .1, .2]\n"
" - memory modify, auto increment address\n"
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index cac99d5..6560702 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -1233,7 +1233,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
dev_desc->blksz=ATA_BLOCKSIZE;
dev_desc->lun=0; /* just to fill something in... */
-#if 0 /* only used to test the powersaving mode,
+#if 0 /* only used to test the powersaving mode,
* if enabled, the drive goes after 5 sec
* in standby mode */
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
@@ -1783,7 +1783,7 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha
}
output_data_shorts (device, (unsigned short *)ccb,ccblen/2); /* write command block */
- /* ATAPI Command written wait for completition */
+ /* ATAPI Command written wait for completition */
udelay (5000); /* device must set bsy */
mask = ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR;
@@ -1852,7 +1852,7 @@ AI_OUT:
* returns, an request_sense will be issued
*/
-#define ATAPI_DRIVE_NOT_READY 100
+#define ATAPI_DRIVE_NOT_READY 100
#define ATAPI_UNIT_ATTN 10
unsigned char atapi_issue_autoreq (int device,
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 51aa71f..2606986 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1201,56 +1201,56 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/**************************************************/
#if defined(CONFIG_CMD_MEMORY)
U_BOOT_CMD(
- md, 3, 1, do_mem_md,
- "md - memory display\n",
- "[.b, .w, .l] address [# of objects]\n - memory display\n"
+ md, 3, 1, do_mem_md,
+ "md - memory display\n",
+ "[.b, .w, .l] address [# of objects]\n - memory display\n"
);
U_BOOT_CMD(
- mm, 2, 1, do_mem_mm,
- "mm - memory modify (auto-incrementing)\n",
+ mm, 2, 1, do_mem_mm,
+ "mm - memory modify (auto-incrementing)\n",
"[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
);
U_BOOT_CMD(
- nm, 2, 1, do_mem_nm,
- "nm - memory modify (constant address)\n",
+ nm, 2, 1, do_mem_nm,
+ "nm - memory modify (constant address)\n",
"[.b, .w, .l] address\n - memory modify, read and keep address\n"
);
U_BOOT_CMD(
- mw, 4, 1, do_mem_mw,
- "mw - memory write (fill)\n",
- "[.b, .w, .l] address value [count]\n - write memory\n"
+ mw, 4, 1, do_mem_mw,
+ "mw - memory write (fill)\n",
+ "[.b, .w, .l] address value [count]\n - write memory\n"
);
U_BOOT_CMD(
- cp, 4, 1, do_mem_cp,
- "cp - memory copy\n",
+ cp, 4, 1, do_mem_cp,
+ "cp - memory copy\n",
"[.b, .w, .l] source target count\n - copy memory\n"
);
U_BOOT_CMD(
- cmp, 4, 1, do_mem_cmp,
- "cmp - memory compare\n",
+ cmp, 4, 1, do_mem_cmp,
+ "cmp - memory compare\n",
"[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
);
#ifndef CONFIG_CRC32_VERIFY
U_BOOT_CMD(
- crc32, 4, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ crc32, 4, 1, do_mem_crc,
+ "crc32 - checksum calculation\n",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
);
#else /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- crc32, 5, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ crc32, 5, 1, do_mem_crc,
+ "crc32 - checksum calculation\n",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
"-v address count crc\n - verify crc of memory area\n"
);
@@ -1258,45 +1258,45 @@ U_BOOT_CMD(
#endif /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- base, 2, 1, do_mem_base,
- "base - print or set address offset\n",
+ base, 2, 1, do_mem_base,
+ "base - print or set address offset\n",
"\n - print address offset for memory commands\n"
"base off\n - set address offset for memory commands to 'off'\n"
);
U_BOOT_CMD(
- loop, 3, 1, do_mem_loop,
- "loop - infinite loop on address range\n",
+ loop, 3, 1, do_mem_loop,
+ "loop - infinite loop on address range\n",
"[.b, .w, .l] address number_of_objects\n"
" - loop on a set of addresses\n"
);
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
- loopw, 4, 1, do_mem_loopw,
- "loopw - infinite write loop on address range\n",
+ loopw, 4, 1, do_mem_loopw,
+ "loopw - infinite write loop on address range\n",
"[.b, .w, .l] address number_of_objects data_to_write\n"
" - loop on a set of addresses\n"
);
#endif /* CONFIG_LOOPW */
U_BOOT_CMD(
- mtest, 4, 1, do_mem_mtest,
- "mtest - simple RAM test\n",
+ mtest, 4, 1, do_mem_mtest,
+ "mtest - simple RAM test\n",
"[start [end [pattern]]]\n"
" - simple RAM read/write test\n"
);
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
- mdc, 4, 1, do_mem_mdc,
- "mdc - memory display cyclic\n",
+ mdc, 4, 1, do_mem_mdc,
+ "mdc - memory display cyclic\n",
"[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
);
U_BOOT_CMD(
- mwc, 4, 1, do_mem_mwc,
- "mwc - memory write cyclic\n",
+ mwc, 4, 1, do_mem_mwc,
+ "mwc - memory write cyclic\n",
"[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
);
#endif /* CONFIG_MX_CYCLIC */
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index 82d9717..8968701 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -173,7 +173,7 @@ static char *pci_classes_str(u8 class)
* Subroutine: pci_header_show_brief
*
* Description: Reads and prints the header of the
- * specified PCI device in short form.
+ * specified PCI device in short form.
*
* Inputs: dev Bus+Device+Function number
*
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index dd808ed..1669d74 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -109,24 +109,24 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
puts ("\nMemory (SDRAM) Configuration\n"
"besra besrsa besrb besrsb bear mcopt1 rtr pmit\n");
- mtdcr(memcfga,mem_besra); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_besra); printf ("%08x ", mfdcr(memcfgd));
mtdcr(memcfga,mem_besrsa); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_besrb); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_besrsb); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_bear); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_mcopt1); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_rtr); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_pmit); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_besrb); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_besrsb); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_bear); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_mcopt1); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_rtr); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_pmit); printf ("%08x ", mfdcr(memcfgd));
puts ("\n"
"mb0cf mb1cf mb2cf mb3cf sdtr1 ecccf eccerr\n");
- mtdcr(memcfga,mem_mb0cf); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_mb1cf); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_mb2cf); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_mb3cf); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_sdtr1); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_ecccf); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_eccerr); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_mb0cf); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_mb1cf); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_mb2cf); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_mb3cf); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_sdtr1); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_ecccf); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_eccerr); printf ("%08x ", mfdcr(memcfgd));
printf ("\n\n"
"DMA Channels\n"
@@ -149,32 +149,32 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
puts ("\n"
"External Bus\n"
"pbear pbesr0 pbesr1 epcr\n");
- mtdcr(ebccfga,pbear); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pbesr0); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pbesr1); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,epcr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pbear); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pbesr0); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pbesr1); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,epcr); printf ("%08x ", mfdcr(ebccfgd));
puts ("\n"
"pb0cr pb0ap pb1cr pb1ap pb2cr pb2ap pb3cr pb3ap\n");
- mtdcr(ebccfga,pb0cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb0ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb1cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb1ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb2cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb2ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb3cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb3ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb0cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb0ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb1cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb1ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb2cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb2ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb3cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb3ap); printf ("%08x ", mfdcr(ebccfgd));
puts ("\n"
"pb4cr pb4ap pb5cr bp5ap pb6cr pb6ap pb7cr pb7ap\n");
- mtdcr(ebccfga,pb4cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb4ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb5cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb5ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb6cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb6ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb7cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb7ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb4cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb4ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb5cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb5ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb6cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb6ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb7cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb7ap); printf ("%08x ", mfdcr(ebccfgd));
puts ("\n\n");
@@ -196,12 +196,12 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
puts ("\nMemory (SDRAM) Configuration\n"
"mcopt1 rtr pmit mb0cf mb1cf sdtr1\n");
- mtdcr(memcfga,mem_mcopt1); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_rtr); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_pmit); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_mb0cf); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_mb1cf); printf ("%08x ", mfdcr(memcfgd));
- mtdcr(memcfga,mem_sdtr1); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_mcopt1); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_rtr); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_pmit); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_mb0cf); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_mb1cf); printf ("%08x ", mfdcr(memcfgd));
+ mtdcr(memcfga,mem_sdtr1); printf ("%08x ", mfdcr(memcfgd));
printf ("\n\n"
"DMA Channels\n"
@@ -221,31 +221,31 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
puts ("\n"
"External Bus\n"
"pbear pbesr0 pbesr1 epcr\n");
- mtdcr(ebccfga,pbear); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pbesr0); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pbesr1); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,epcr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pbear); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pbesr0); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pbesr1); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,epcr); printf ("%08x ", mfdcr(ebccfgd));
puts ("\n"
"pb0cr pb0ap pb1cr pb1ap pb2cr pb2ap pb3cr pb3ap\n");
- mtdcr(ebccfga,pb0cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb0ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb1cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb1ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb2cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb2ap); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb3cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb3ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb0cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb0ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb1cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb1ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb2cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb2ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb3cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb3ap); printf ("%08x ", mfdcr(ebccfgd));
puts ("\n"
"pb4cr pb4ap\n");
- mtdcr(ebccfga,pb4cr); printf ("%08x ", mfdcr(ebccfgd));
- mtdcr(ebccfga,pb4ap); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb4cr); printf ("%08x ", mfdcr(ebccfgd));
+ mtdcr(ebccfga,pb4ap); printf ("%08x ", mfdcr(ebccfgd));
puts ("\n\n");
#elif defined(CONFIG_5xx)
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile memctl5xx_t *memctl = &immap->im_memctl;
volatile sysconf5xx_t *sysconf = &immap->im_siu_conf;
volatile sit5xx_t *timers = &immap->im_sit;
@@ -382,7 +382,7 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#if defined(CONFIG_CMD_REGINFO)
U_BOOT_CMD(
- reginfo, 2, 1, do_reginfo,
+ reginfo, 2, 1, do_reginfo,
"reginfo - print register information\n",
);
#endif
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index f49531e..69028f3 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -393,7 +393,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
- case 3:
+ case 3:
if (strncmp(argv[1],"dev",3) == 0) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
printf ("\nSCSI device %d: ", dev);
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 23413b5..9be86b8 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -475,7 +475,7 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#ifdef CONFIG_USB_STORAGE
/* try to recognize storage devices immediately */
if (i >= 0)
- usb_stor_curr_dev = usb_stor_scan(1);
+ usb_stor_curr_dev = usb_stor_scan(1);
#endif
return 0;
}
diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c
index 29c349d..104c310 100644
--- a/common/cmd_vfd.c
+++ b/common/cmd_vfd.c
@@ -66,10 +66,10 @@ int do_vfd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(
- vfd, 2, 0, do_vfd,
- "vfd - load a bitmap to the VFDs on TRAB\n",
- "/N\n"
- " - load bitmap N to the VFDs (N is _decimal_ !!!)\n"
+ vfd, 2, 0, do_vfd,
+ "vfd - load a bitmap to the VFDs on TRAB\n",
+ "/N\n"
+ " - load bitmap N to the VFDs (N is _decimal_ !!!)\n"
"vfd ADDR\n"
" - load bitmap at address ADDR\n"
);
diff --git a/common/command.c b/common/command.c
index af2f8cb..861796d 100644
--- a/common/command.c
+++ b/common/command.c
@@ -38,7 +38,7 @@ do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
version, 1, 1, do_version,
- "version - print monitor version\n",
+ "version - print monitor version\n",
NULL
);
@@ -71,8 +71,8 @@ do_echo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
echo, CFG_MAXARGS, 1, do_echo,
- "echo - echo args to console\n",
- "[args..]\n"
+ "echo - echo args to console\n",
+ "[args..]\n"
" - echo args to console; \\c suppresses newline\n"
);
@@ -196,17 +196,15 @@ do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
expr = !expr;
-#if 0
- printf(": returns %d\n", expr);
-#endif
+ debug (": returns %d\n", expr);
return expr;
}
U_BOOT_CMD(
test, CFG_MAXARGS, 1, do_test,
- "test - minimal test like /bin/sh\n",
- "[args..]\n"
+ "test - minimal test like /bin/sh\n",
+ "[args..]\n"
" - test functionality\n"
);
@@ -224,7 +222,7 @@ do_exit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
exit, 2, 1, do_exit,
- "exit - exit script\n",
+ "exit - exit script\n",
" - exit functionality\n"
);
@@ -317,12 +315,12 @@ int do_help (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
help, CFG_MAXARGS, 1, do_help,
- "help - print online help\n",
- "[command ...]\n"
- " - show help information (for 'command')\n"
- "'help' prints online help for the monitor commands.\n\n"
- "Without arguments, it prints a short usage message for all commands.\n\n"
- "To get detailed help information for specific commands you can type\n"
+ "help - print online help\n",
+ "[command ...]\n"
+ " - show help information (for 'command')\n"
+ "'help' prints online help for the monitor commands.\n\n"
+ "Without arguments, it prints a short usage message for all commands.\n\n"
+ "To get detailed help information for specific commands you can type\n"
"'help' with one or more command names as arguments.\n"
);
@@ -330,13 +328,13 @@ U_BOOT_CMD(
#ifdef CFG_LONGHELP
cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
"?", CFG_MAXARGS, 1, do_help,
- "? - alias for 'help'\n",
+ "? - alias for 'help'\n",
NULL
};
#else
cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
"?", CFG_MAXARGS, 1, do_help,
- "? - alias for 'help'\n"
+ "? - alias for 'help'\n"
};
#endif /* CFG_LONGHELP */
@@ -498,7 +496,7 @@ static int make_argv(char *s, int argvsz, char *argv[])
while ((*s == ' ') || (*s == '\t'))
++s;
- if (*s == '\0') /* end of s, no more args */
+ if (*s == '\0') /* end of s, no more args */
break;
argv[argc++] = s; /* begin of argument string */
diff --git a/common/console.c b/common/console.c
index d8a0cb6..1b095b1 100644
--- a/common/console.c
+++ b/common/console.c
@@ -415,7 +415,7 @@ int console_init_r (void)
stdoutname = getenv ("stdout");
stderrname = getenv ("stderr");
- if (OVERWRITE_CONSOLE == 0) { /* if not overwritten by config switch */
+ if (OVERWRITE_CONSOLE == 0) { /* if not overwritten by config switch */
inputdev = search_device (DEV_FLAGS_INPUT, stdinname);
outputdev = search_device (DEV_FLAGS_OUTPUT, stdoutname);
errdev = search_device (DEV_FLAGS_OUTPUT, stderrname);
diff --git a/common/env_dataflash.c b/common/env_dataflash.c
index 8a94432..2945364 100644
--- a/common/env_dataflash.c
+++ b/common/env_dataflash.c
@@ -98,7 +98,7 @@ int env_init(void)
}
}
- return (0);
+ return (0);
}
#endif /* CFG_ENV_IS_IN_DATAFLASH */
diff --git a/common/env_nand.c b/common/env_nand.c
index 49742f5..70d05ad 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -273,7 +273,7 @@ void env_relocate_spec (void)
total = CFG_ENV_SIZE;
ret = nand_read(&nand_info[0], CFG_ENV_OFFSET, &total, (u_char*)env_ptr);
- if (ret || total != CFG_ENV_SIZE)
+ if (ret || total != CFG_ENV_SIZE)
return use_default();
if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc)
diff --git a/common/hush.c b/common/hush.c
index 582635c..b43f618 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -1,4 +1,3 @@
-/* vi: set sw=4 ts=4: */
/*
* sh.c -- a prototype Bourne shell grammar parser
* Intended to follow the original Thompson and Ritchie
diff --git a/common/lists.c b/common/lists.c
index 3f117b5..0dc090a 100644
--- a/common/lists.c
+++ b/common/lists.c
@@ -2,8 +2,8 @@
#include <malloc.h>
#include <lists.h>
-#define MAX(a,b) (((a)>(b)) ? (a) : (b))
-#define MIN(a,b) (((a)<(b)) ? (a) : (b))
+#define MAX(a,b) (((a)>(b)) ? (a) : (b))
+#define MIN(a,b) (((a)<(b)) ? (a) : (b))
#define CAT4CHARS(a,b,c,d) ((a<<24) | (b<<16) | (c<<8) | d)
/* increase list size by 10% every time it is full */
diff --git a/common/usb.c b/common/usb.c
index 2fa5254..52e8472 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -180,7 +180,7 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe,
setup_packet.value = swap_16(value);
setup_packet.index = swap_16(index);
setup_packet.length = swap_16(size);
- USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X\nvalue 0x%X index 0x%X length 0x%X\n",
+ USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X\nvalue 0x%X index 0x%X length 0x%X\n",
request,requesttype,value,index,size);
dev->status=USB_ST_NOT_PROC; /*not yet processed */
@@ -387,7 +387,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe)
int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char index, void *buf, int size)
{
int res;
- res = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ res = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
(type << 8) + index, 0,
buf, size, USB_CNTL_TIMEOUT);
@@ -399,7 +399,7 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char
*/
int usb_get_configuration_no(struct usb_device *dev,unsigned char *buffer,int cfgno)
{
- int result;
+ int result;
unsigned int tmp;
struct usb_config_descriptor *config;
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index 1703b23..11e861d 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -238,7 +238,7 @@ static void usb_kbd_setled(struct usb_device *dev)
leds|=1;
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0x200, iface->bInterfaceNumber,(void *)&leds, 1, 0);
+ 0x200, iface->bInterfaceNumber,(void *)&leds, 1, 0);
}
@@ -251,7 +251,7 @@ static int usb_kbd_translate(unsigned char scancode,unsigned char modifier,int p
if(pressed==0) {
/* key released */
- repeat_delay=0;
+ repeat_delay=0;
return 0;
}
if(pressed==2) {
diff --git a/common/virtex2.c b/common/virtex2.c
index 1283ff6..665a503 100644
--- a/common/virtex2.c
+++ b/common/virtex2.c
@@ -84,7 +84,7 @@
* an XC2V1000, if anyone can ever get ahold of one.
*/
#ifndef CFG_FPGA_WAIT_INIT
-#define CFG_FPGA_WAIT_INIT CFG_HZ/2 /* 500 ms */
+#define CFG_FPGA_WAIT_INIT CFG_HZ/2 /* 500 ms */
#endif
/*
diff --git a/config.mk b/config.mk
index 62fc1d5..b08b7a7 100644
--- a/config.mk
+++ b/config.mk
@@ -162,7 +162,7 @@ CPPFLAGS += -I$(OBJTREE)/include2 -I$(OBJTREE)/include
endif
CPPFLAGS += -I$(TOPDIR)/include
-CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \
+CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \
-isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
ifdef BUILD_TAG
diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
index a829ba7..1cad8f9 100644
--- a/cpu/arm1136/mx31/serial.c
+++ b/cpu/arm1136/mx31/serial.c
@@ -77,9 +77,9 @@
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#define UCR1_DOZE (1<<1) /* Doze */
#define UCR1_UARTEN (1<<0) /* UART enabled */
-#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
-#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
-#define UCR2_CTSC (1<<13) /* CTS pin control */
+#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
+#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
+#define UCR2_CTSC (1<<13) /* CTS pin control */
#define UCR2_CTS (1<<12) /* Clear to send */
#define UCR2_ESCEN (1<<11) /* Escape enable */
#define UCR2_PREN (1<<8) /* Parity enable */
@@ -89,8 +89,8 @@
#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
#define UCR2_TXEN (1<<2) /* Transmitter enabled */
#define UCR2_RXEN (1<<1) /* Receiver enabled */
-#define UCR2_SRST (1<<0) /* SW reset */
-#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
+#define UCR2_SRST (1<<0) /* SW reset */
+#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
#define UCR3_PARERREN (1<<12) /* Parity enable */
#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
#define UCR3_DSR (1<<10) /* Data set ready */
@@ -100,51 +100,51 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
-#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
-#define UCR3_BPEN (1<<0) /* Preset registers enable */
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
+#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
-#define UCR4_INVR (1<<9) /* Inverted infrared reception */
-#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
-#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
-#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
-#define UCR4_IRSC (1<<5) /* IR special case */
-#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
-#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
-#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
-#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
+#define UCR4_INVR (1<<9) /* Inverted infrared reception */
+#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
+#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
+#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
+#define UCR4_IRSC (1<<5) /* IR special case */
+#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
+#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
+#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
+#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
-#define USR1_RTSS (1<<14) /* RTS pin status */
-#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
-#define USR1_RTSD (1<<12) /* RTS delta */
-#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
+#define USR1_RTSS (1<<14) /* RTS pin status */
+#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
+#define USR1_RTSD (1<<12) /* RTS delta */
+#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
-#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
+#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
-#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
-#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
-#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
-#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
-#define USR2_IDLE (1<<12) /* Idle condition */
-#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
-#define USR2_WAKE (1<<7) /* Wake */
-#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
-#define USR2_TXDC (1<<3) /* Transmitter complete */
-#define USR2_BRCD (1<<2) /* Break condition */
+#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
+#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
+#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
+#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
+#define USR2_IDLE (1<<12) /* Idle condition */
+#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
+#define USR2_WAKE (1<<7) /* Wake */
+#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
+#define USR2_TXDC (1<<3) /* Transmitter complete */
+#define USR2_BRCD (1<<2) /* Break condition */
#define USR2_ORE (1<<1) /* Overrun error */
#define USR2_RDR (1<<0) /* Recv data ready */
#define UTS_FRCPERR (1<<13) /* Force parity error */
#define UTS_LOOP (1<<12) /* Loop tx and rx */
#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
-#define UTS_TXFULL (1<<4) /* TxFIFO full */
-#define UTS_RXFULL (1<<3) /* RxFIFO full */
+#define UTS_TXFULL (1<<4) /* TxFIFO full */
+#define UTS_RXFULL (1<<3) /* RxFIFO full */
#define UTS_SOFTRST (1<<0) /* Software reset */
DECLARE_GLOBAL_DATA_PTR;
diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S
index 56009d0..51b664d 100644
--- a/cpu/arm1136/start.S
+++ b/cpu/arm1136/start.S
@@ -131,7 +131,7 @@ reset:
#ifdef CONFIG_OMAP2420H4
/* Copy vectors to mask ROM indirect addr */
adr r0, _start /* r0 <- current position of code */
- add r0, r0, #4 /* skip reset vector */
+ add r0, r0, #4 /* skip reset vector */
mov r2, #64 /* r2 <- size to copy */
add r2, r0, r2 /* r2 <- source end address */
mov r1, #SRAM_OFFSET0 /* build vect addr */
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index 475607d..9854016 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -182,7 +182,7 @@ int interrupt_init (void)
PUT32(T0IR, 0); /* disable all timer0 interrupts */
PUT32(T0TCR, 0); /* disable timer0 */
PUT32(T0PR, CFG_SYS_CLK_FREQ / CFG_HZ);
- PUT32(T0MCR, 0);
+ PUT32(T0MCR, 0);
PUT32(T0TC, 0);
PUT32(T0TCR, 1); /* enable timer0 */
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
index bc6bf30..a593cbc 100644
--- a/cpu/arm720t/serial_netarm.c
+++ b/cpu/arm720t/serial_netarm.c
@@ -44,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR;
#endif
/* wait until transmitter is ready for another character */
-#define TXWAITRDY(registers) \
+#define TXWAITRDY(registers) \
{ \
ulong tmo = get_timer(0) + 1 * CFG_HZ; \
while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \
diff --git a/cpu/arm920t/at91rm9200/ether.c b/cpu/arm920t/at91rm9200/ether.c
index c8f56aa..f20e070 100644
--- a/cpu/arm920t/at91rm9200/ether.c
+++ b/cpu/arm920t/at91rm9200/ether.c
@@ -105,7 +105,7 @@ void at91rm9200_EmacDisableMDIO (AT91PS_EMAC p_mac)
* Arguments:
* dev - pointer to struct net_device
* RegisterAddress - unsigned char
- * pInput - pointer to value read from register
+ * pInput - pointer to value read from register
* Return value:
* TRUE - if data read successfully
*/
@@ -134,7 +134,7 @@ UCHAR at91rm9200_EmacReadPhy (AT91PS_EMAC p_mac,
* Arguments:
* dev - pointer to struct net_device
* RegisterAddress - unsigned char
- * pOutput - pointer to value to be written in the register
+ * pOutput - pointer to value to be written in the register
* Return value:
* TRUE - if data read successfully
*/
diff --git a/cpu/arm920t/imx/serial.c b/cpu/arm920t/imx/serial.c
index 9dbaa56..6c56acb 100644
--- a/cpu/arm920t/imx/serial.c
+++ b/cpu/arm920t/imx/serial.c
@@ -115,7 +115,7 @@ int serial_init (void)
/* Enable FIFOs */
base->ucr2 |= UCR2_SRST | UCR2_RXEN | UCR2_TXEN;
- /* Clear status flags */
+ /* Clear status flags */
base->usr2 |= USR2_ADET |
USR2_DTRF |
USR2_IDLE |
@@ -126,7 +126,7 @@ int serial_init (void)
USR2_ORE |
USR2_RDR;
- /* Clear status flags */
+ /* Clear status flags */
base->usr1 |= USR1_PARITYERR |
USR1_RTSD |
USR1_ESCF |
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index 96e43d0..b57c2d8 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -971,13 +971,13 @@ static unsigned char root_hub_str_index1[] =
/*-------------------------------------------------------------------------*/
-#define OK(x) len = (x); break
+#define OK(x) len = (x); break
#ifdef DEBUG
-#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
+#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
#else
-#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
#endif
#define RD_RH_STAT roothub_status(&gohci)
#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
@@ -1163,7 +1163,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
data_buf [1] = 0x29;
data_buf [2] = temp & RH_A_NDP;
data_buf [3] = 0;
- if (temp & RH_A_PSM) /* per-port power switching? */
+ if (temp & RH_A_PSM) /* per-port power switching? */
data_buf [3] |= 0x1;
if (temp & RH_A_NOCP) /* no overcurrent reporting? */
data_buf [3] |= 0x10;
@@ -1188,9 +1188,9 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
OK (len);
}
- case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
+ case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
- case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
+ case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
default:
dbg ("unsupported root hub command");
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.h b/cpu/arm920t/s3c24x0/usb_ohci.h
index 5e9a0fd..3af5fca 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.h
+++ b/cpu/arm920t/s3c24x0/usb_ohci.h
@@ -11,30 +11,30 @@
static int cc_to_error[16] = {
/* mapping of the OHCI CC status to error codes */
- /* No Error */ 0,
- /* CRC Error */ USB_ST_CRC_ERR,
- /* Bit Stuff */ USB_ST_BIT_ERR,
- /* Data Togg */ USB_ST_CRC_ERR,
- /* Stall */ USB_ST_STALLED,
- /* DevNotResp */ -1,
- /* PIDCheck */ USB_ST_BIT_ERR,
- /* UnExpPID */ USB_ST_BIT_ERR,
- /* DataOver */ USB_ST_BUF_ERR,
- /* DataUnder */ USB_ST_BUF_ERR,
- /* reservd */ -1,
- /* reservd */ -1,
- /* BufferOver */ USB_ST_BUF_ERR,
- /* BuffUnder */ USB_ST_BUF_ERR,
- /* Not Access */ -1,
- /* Not Access */ -1
+ /* No Error */ 0,
+ /* CRC Error */ USB_ST_CRC_ERR,
+ /* Bit Stuff */ USB_ST_BIT_ERR,
+ /* Data Togg */ USB_ST_CRC_ERR,
+ /* Stall */ USB_ST_STALLED,
+ /* DevNotResp */ -1,
+ /* PIDCheck */ USB_ST_BIT_ERR,
+ /* UnExpPID */ USB_ST_BIT_ERR,
+ /* DataOver */ USB_ST_BUF_ERR,
+ /* DataUnder */ USB_ST_BUF_ERR,
+ /* reservd */ -1,
+ /* reservd */ -1,
+ /* BufferOver */ USB_ST_BUF_ERR,
+ /* BuffUnder */ USB_ST_BUF_ERR,
+ /* Not Access */ -1,
+ /* Not Access */ -1
};
/* ED States */
-#define ED_NEW 0x00
-#define ED_UNLINK 0x01
+#define ED_NEW 0x00
+#define ED_UNLINK 0x01
#define ED_OPER 0x02
#define ED_DEL 0x04
-#define ED_URB_DEL 0x08
+#define ED_URB_DEL 0x08
/* usb_ohci_ed */
struct ed {
@@ -60,53 +60,53 @@ typedef struct ed ed_t;
/* TD info field */
-#define TD_CC 0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC 0x0C000000
-#define TD_T 0x03000000
-#define TD_T_DATA0 0x02000000
-#define TD_T_DATA1 0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R 0x00040000
-#define TD_DI 0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP 0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN 0x00100000
-#define TD_DP_OUT 0x00080000
-
-#define TD_ISO 0x00010000
-#define TD_DEL 0x00020000
+#define TD_CC 0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC 0x0C000000
+#define TD_T 0x03000000
+#define TD_T_DATA0 0x02000000
+#define TD_T_DATA1 0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R 0x00040000
+#define TD_DI 0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP 0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN 0x00100000
+#define TD_DP_OUT 0x00080000
+
+#define TD_ISO 0x00010000
+#define TD_DEL 0x00020000
/* CC Codes */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
-#define TD_NOTACCESSED 0x0F
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+#define TD_NOTACCESSED 0x0F
#define MAXPSW 1
struct td {
__u32 hwINFO;
- __u32 hwCBP; /* Current Buffer Pointer */
- __u32 hwNextTD; /* Next TD Pointer */
- __u32 hwBE; /* Memory Buffer End Pointer */
-
- __u8 unused;
- __u8 index;
- struct ed *ed;
- struct td *next_dl_td;
+ __u32 hwCBP; /* Current Buffer Pointer */
+ __u32 hwNextTD; /* Next TD Pointer */
+ __u32 hwBE; /* Memory Buffer End Pointer */
+
+ __u8 unused;
+ __u8 index;
+ struct ed *ed;
+ struct td *next_dl_td;
struct usb_device *usb_dev;
int transfer_len;
__u32 data;
@@ -129,7 +129,7 @@ struct ohci_hcca {
__u16 frame_no; /* current frame number */
__u16 pad1; /* set to 0 on each frame_no change */
__u32 done_head; /* info returned for an interrupt */
- u8 reserved_for_hc[116];
+ u8 reserved_for_hc[116];
} __attribute((aligned(256)));
@@ -140,7 +140,7 @@ struct ohci_hcca {
/*
* This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
+ * region. This is Memory Mapped I/O. You must use the readl() and
* writel() macros defined in asm/io.h to access these!!
*/
struct ohci_regs {
@@ -200,10 +200,10 @@ struct ohci_regs {
* HcCommandStatus (cmdstatus) register masks
*/
#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
/*
* masks used with interrupt registers:
@@ -234,93 +234,93 @@ struct virt_root_hub {
/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
#define RH_SET_ADDRESS 0x0500
#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
+#define RH_SET_DESCRIPTOR 0x0700
#define RH_GET_CONFIGURATION 0x0880
#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
+#define RH_SET_EP 0x2000
/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
/* OHCI ROOT HUB REGISTER MASKS */
/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
/* roothub.status bits */
-#define RH_HS_LPS 0x00000001 /* local power status */
-#define RH_HS_OCI 0x00000002 /* over current indicator */
-#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC 0x00010000 /* local power status change */
-#define RH_HS_OCIC 0x00020000 /* over current indicator change */
-#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
/* roothub.b masks */
-#define RH_B_DR 0x0000ffff /* device removable flags */
-#define RH_B_PPCM 0xffff0000 /* port power control mask */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
/* roothub.a masks */
-#define RH_A_NDP (0xff << 0) /* number of downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* over current protection mode */
-#define RH_A_NOCP (1 << 12) /* no over current protection */
-#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
/* urb */
#define N_URB_TD 48
@@ -345,39 +345,39 @@ typedef struct
typedef struct ohci {
- struct ohci_hcca *hcca; /* hcca */
- /*dma_addr_t hcca_dma;*/
+ struct ohci_hcca *hcca; /* hcca */
+ /*dma_addr_t hcca_dma; */
int irq;
- int disabled; /* e.g. got a UE, we're hung */
+ int disabled; /* e.g. got a UE, we're hung */
int sleeping;
- unsigned long flags; /* for HC bugs */
+ unsigned long flags; /* for HC bugs */
struct ohci_regs *regs; /* OHCI controller's memory */
- ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
- ed_t *ed_bulktail; /* last endpoint of bulk list */
- ed_t *ed_controltail; /* last endpoint of control list */
+ ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
+ ed_t *ed_bulktail; /* last endpoint of bulk list */
+ ed_t *ed_controltail; /* last endpoint of control list */
int intrstatus;
- __u32 hc_control; /* copy of the hc control reg */
+ __u32 hc_control; /* copy of the hc control reg */
struct usb_device *dev[32];
struct virt_root_hub rh;
- const char *slot_name;
+ const char *slot_name;
} ohci_t;
#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
struct ohci_device {
- ed_t ed[NUM_EDS];
+ ed_t ed[NUM_EDS];
int ed_cnt;
};
/* hcd */
/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe);
+static int ep_link (ohci_t * ohci, ed_t * ed);
+static int ep_unlink (ohci_t * ohci, ed_t * ed);
+static ed_t *ep_add_ed (struct usb_device *usb_dev, unsigned long pipe);
/*-------------------------------------------------------------------------*/
@@ -385,22 +385,20 @@ static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe);
#define NUM_TD 64
/* +1 so we can align the storage */
-td_t gtd[NUM_TD+1];
+td_t gtd[NUM_TD + 1];
+
/* pointers to aligned storage */
td_t *ptd;
/* TDs ... */
-static inline struct td *
-td_alloc (struct usb_device *usb_dev)
+static inline struct td *td_alloc (struct usb_device *usb_dev)
{
int i;
- struct td *td;
+ struct td *td;
td = NULL;
- for (i = 0; i < NUM_TD; i++)
- {
- if (ptd[i].usb_dev == NULL)
- {
+ for (i = 0; i < NUM_TD; i++) {
+ if (ptd[i].usb_dev == NULL) {
td = &ptd[i];
td->usb_dev = usb_dev;
break;
@@ -410,8 +408,7 @@ td_alloc (struct usb_device *usb_dev)
return td;
}
-static inline void
-ed_free (struct ed *ed)
+static inline void ed_free (struct ed *ed)
{
ed->usb_dev = NULL;
}
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index acc00ad..62231f8 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -212,7 +212,7 @@ stack_setup:
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
@@ -377,31 +377,31 @@ cpu_init_crit:
undefined_instruction:
get_bad_stack
bad_save_user_regs
- bl do_undefined_instruction
+ bl do_undefined_instruction
.align 5
software_interrupt:
get_bad_stack
bad_save_user_regs
- bl do_software_interrupt
+ bl do_software_interrupt
.align 5
prefetch_abort:
get_bad_stack
bad_save_user_regs
- bl do_prefetch_abort
+ bl do_prefetch_abort
.align 5
data_abort:
get_bad_stack
bad_save_user_regs
- bl do_data_abort
+ bl do_data_abort
.align 5
not_used:
get_bad_stack
bad_save_user_regs
- bl do_not_used
+ bl do_not_used
#ifdef CONFIG_USE_IRQ
@@ -409,7 +409,7 @@ not_used:
irq:
get_irq_stack
irq_save_user_regs
- bl do_irq
+ bl do_irq
irq_restore_user_regs
.align 5
@@ -417,7 +417,7 @@ fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
- bl do_fiq
+ bl do_fiq
irq_restore_user_regs
#else
@@ -426,12 +426,12 @@ fiq:
irq:
get_bad_stack
bad_save_user_regs
- bl do_irq
+ bl do_irq
.align 5
fiq:
get_bad_stack
bad_save_user_regs
- bl do_fiq
+ bl do_fiq
#endif
diff --git a/cpu/arm925t/start.S b/cpu/arm925t/start.S
index acd7742..5ddda54 100644
--- a/cpu/arm925t/start.S
+++ b/cpu/arm925t/start.S
@@ -9,7 +9,7 @@
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
- * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -200,7 +200,7 @@ stack_setup:
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
@@ -357,31 +357,31 @@ cpu_init_crit:
undefined_instruction:
get_bad_stack
bad_save_user_regs
- bl do_undefined_instruction
+ bl do_undefined_instruction
.align 5
software_interrupt:
get_bad_stack
bad_save_user_regs
- bl do_software_interrupt
+ bl do_software_interrupt
.align 5
prefetch_abort:
get_bad_stack
bad_save_user_regs
- bl do_prefetch_abort
+ bl do_prefetch_abort
.align 5
data_abort:
get_bad_stack
bad_save_user_regs
- bl do_data_abort
+ bl do_data_abort
.align 5
not_used:
get_bad_stack
bad_save_user_regs
- bl do_not_used
+ bl do_not_used
#ifdef CONFIG_USE_IRQ
@@ -389,7 +389,7 @@ not_used:
irq:
get_irq_stack
irq_save_user_regs
- bl do_irq
+ bl do_irq
irq_restore_user_regs
.align 5
@@ -397,7 +397,7 @@ fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
- bl do_fiq
+ bl do_fiq
irq_restore_user_regs
#else
@@ -406,13 +406,13 @@ fiq:
irq:
get_bad_stack
bad_save_user_regs
- bl do_irq
+ bl do_irq
.align 5
fiq:
get_bad_stack
bad_save_user_regs
- bl do_fiq
+ bl do_fiq
#endif
diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c
index 5719845..2aa9ef1 100644
--- a/cpu/arm926ejs/davinci/dp83848.c
+++ b/cpu/arm926ejs/davinci/dp83848.c
@@ -125,7 +125,7 @@ int dp83848_auto_negotiate(int phy_addr)
* 10BaseTFD and HD, IEEE 802.3
*/
tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
- DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
+ DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c
index 766bc7d..d286ec0 100644
--- a/cpu/arm926ejs/davinci/ether.c
+++ b/cpu/arm926ejs/davinci/ether.c
@@ -489,7 +489,7 @@ static void dm644x_eth_ch_teardown(int ch)
dly--;
udelay(1);
if (dly == 0)
- break;
+ break;
}
adap_emac->TX0CP = cnt;
adap_emac->TX0HDP = 0;
@@ -504,7 +504,7 @@ static void dm644x_eth_ch_teardown(int ch)
dly--;
udelay(1);
if (dly == 0)
- break;
+ break;
}
adap_emac->RX0CP = cnt;
adap_emac->RX0HDP = 0;
@@ -535,83 +535,85 @@ static int tx_send_loop = 0;
* This function sends a single packet on the network and returns
* positive number (number of bytes transmitted) or negative for error
*/
-static int dm644x_eth_send_packet(volatile void *packet, int length)
+static int dm644x_eth_send_packet (volatile void *packet, int length)
{
int ret_status = -1;
+
tx_send_loop = 0;
/* Return error if no link */
- if (!phy.get_link_speed(active_phy_addr))
- {
- printf("WARN: emac_send_packet: No link\n");
+ if (!phy.get_link_speed (active_phy_addr)) {
+ printf ("WARN: emac_send_packet: No link\n");
return (ret_status);
}
/* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */
- if (length < EMAC_MIN_ETHERNET_PKT_SIZE)
- {
+ if (length < EMAC_MIN_ETHERNET_PKT_SIZE) {
length = EMAC_MIN_ETHERNET_PKT_SIZE;
}
/* Populate the TX descriptor */
- emac_tx_desc->next = 0;
- emac_tx_desc->buffer = (u_int8_t *)packet;
+ emac_tx_desc->next = 0;
+ emac_tx_desc->buffer = (u_int8_t *) packet;
emac_tx_desc->buff_off_len = (length & 0xffff);
emac_tx_desc->pkt_flag_len = ((length & 0xffff) |
- EMAC_CPPI_SOP_BIT |
- EMAC_CPPI_OWNERSHIP_BIT |
- EMAC_CPPI_EOP_BIT);
+ EMAC_CPPI_SOP_BIT |
+ EMAC_CPPI_OWNERSHIP_BIT |
+ EMAC_CPPI_EOP_BIT);
/* Send the packet */
- adap_emac->TX0HDP = (unsigned int)emac_tx_desc;
+ adap_emac->TX0HDP = (unsigned int) emac_tx_desc;
/* Wait for packet to complete or link down */
while (1) {
- if (!phy.get_link_speed(active_phy_addr)) {
- dm644x_eth_ch_teardown(EMAC_CH_TX);
- return (ret_status);
- }
- if (adap_emac->TXINTSTATRAW & 0x01) {
- ret_status = length;
- break;
+ if (!phy.get_link_speed (active_phy_addr)) {
+ dm644x_eth_ch_teardown (EMAC_CH_TX);
+ return (ret_status);
+ }
+ if (adap_emac->TXINTSTATRAW & 0x01) {
+ ret_status = length;
+ break;
}
- tx_send_loop++;
+ tx_send_loop++;
}
- return(ret_status);
+ return (ret_status);
}
/*
* This function handles receipt of a packet from the network
*/
-static int dm644x_eth_rcv_packet(void)
+static int dm644x_eth_rcv_packet (void)
{
- volatile emac_desc *rx_curr_desc;
- volatile emac_desc *curr_desc;
- volatile emac_desc *tail_desc;
- int status, ret = -1;
+ volatile emac_desc *rx_curr_desc;
+ volatile emac_desc *curr_desc;
+ volatile emac_desc *tail_desc;
+ int status, ret = -1;
rx_curr_desc = emac_rx_active_head;
status = rx_curr_desc->pkt_flag_len;
if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) {
- if (status & EMAC_CPPI_RX_ERROR_FRAME) {
- /* Error in packet - discard it and requeue desc */
- printf("WARN: emac_rcv_pkt: Error in packet\n");
+ if (status & EMAC_CPPI_RX_ERROR_FRAME) {
+ /* Error in packet - discard it and requeue desc */
+ printf ("WARN: emac_rcv_pkt: Error in packet\n");
} else {
- NetReceive(rx_curr_desc->buffer, (rx_curr_desc->buff_off_len & 0xffff));
+ NetReceive (rx_curr_desc->buffer,
+ (rx_curr_desc->buff_off_len & 0xffff));
ret = rx_curr_desc->buff_off_len & 0xffff;
- }
+ }
- /* Ack received packet descriptor */
- adap_emac->RX0CP = (unsigned int)rx_curr_desc;
- curr_desc = rx_curr_desc;
- emac_rx_active_head = (volatile emac_desc *)rx_curr_desc->next;
+ /* Ack received packet descriptor */
+ adap_emac->RX0CP = (unsigned int) rx_curr_desc;
+ curr_desc = rx_curr_desc;
+ emac_rx_active_head =
+ (volatile emac_desc *) rx_curr_desc->next;
- if (status & EMAC_CPPI_EOQ_BIT) {
- if (emac_rx_active_head) {
- adap_emac->RX0HDP = (unsigned int)emac_rx_active_head;
+ if (status & EMAC_CPPI_EOQ_BIT) {
+ if (emac_rx_active_head) {
+ adap_emac->RX0HDP =
+ (unsigned int) emac_rx_active_head;
} else {
emac_rx_queue_active = 0;
- printf("INFO:emac_rcv_packet: RX Queue not active\n");
+ printf ("INFO:emac_rcv_packet: RX Queue not active\n");
}
}
@@ -621,28 +623,29 @@ static int dm644x_eth_rcv_packet(void)
rx_curr_desc->next = 0;
if (emac_rx_active_head == 0) {
- printf("INFO: emac_rcv_pkt: active queue head = 0\n");
+ printf ("INFO: emac_rcv_pkt: active queue head = 0\n");
emac_rx_active_head = curr_desc;
emac_rx_active_tail = curr_desc;
if (emac_rx_queue_active != 0) {
- adap_emac->RX0HDP = (unsigned int)emac_rx_active_head;
- printf("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
+ adap_emac->RX0HDP =
+ (unsigned int) emac_rx_active_head;
+ printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
emac_rx_queue_active = 1;
}
} else {
tail_desc = emac_rx_active_tail;
emac_rx_active_tail = curr_desc;
- tail_desc->next = (unsigned int)curr_desc;
+ tail_desc->next = (unsigned int) curr_desc;
status = tail_desc->pkt_flag_len;
if (status & EMAC_CPPI_EOQ_BIT) {
- adap_emac->RX0HDP = (unsigned int)curr_desc;
+ adap_emac->RX0HDP = (unsigned int) curr_desc;
status &= ~EMAC_CPPI_EOQ_BIT;
tail_desc->pkt_flag_len = status;
}
}
- return(ret);
+ return (ret);
}
- return(0);
+ return (0);
}
#endif /* CONFIG_CMD_NET */
diff --git a/cpu/arm926ejs/davinci/lowlevel_init.S b/cpu/arm926ejs/davinci/lowlevel_init.S
index a87c112..0a4b2cf 100644
--- a/cpu/arm926ejs/davinci/lowlevel_init.S
+++ b/cpu/arm926ejs/davinci/lowlevel_init.S
@@ -110,7 +110,7 @@ checkGemStatClkStop:
str r10, [r6]
/*------------------------------------------------------*
- * DDR2 PLL Initialization *
+ * DDR2 PLL Initialization *
*------------------------------------------------------*/
/* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
@@ -547,7 +547,7 @@ VTP1Lock:
/*
* Call board-specific lowlevel init.
- * That MUST be present and THAT returns
+ * That MUST be present and THAT returns
* back to arch calling code with "mov pc, lr."
*/
b dv_board_init
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
index 127be9f..ffc770f 100644
--- a/cpu/arm926ejs/davinci/nand.c
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -325,17 +325,17 @@ static void nand_flash_init(void)
* *
*------------------------------------------------------------------*/
acfg1 = 0
- | (0 << 31 ) /* selectStrobe */
- | (0 << 30 ) /* extWait */
- | (1 << 26 ) /* writeSetup 10 ns */
- | (3 << 20 ) /* writeStrobe 40 ns */
- | (1 << 17 ) /* writeHold 10 ns */
- | (1 << 13 ) /* readSetup 10 ns */
- | (5 << 7 ) /* readStrobe 60 ns */
- | (1 << 4 ) /* readHold 10 ns */
- | (3 << 2 ) /* turnAround ?? ns */
- | (0 << 0 ) /* asyncSize 8-bit bus */
- ;
+ | (0 << 31 ) /* selectStrobe */
+ | (0 << 30 ) /* extWait */
+ | (1 << 26 ) /* writeSetup 10 ns */
+ | (3 << 20 ) /* writeStrobe 40 ns */
+ | (1 << 17 ) /* writeHold 10 ns */
+ | (1 << 13 ) /* readSetup 10 ns */
+ | (5 << 7 ) /* readStrobe 60 ns */
+ | (1 << 4 ) /* readHold 10 ns */
+ | (3 << 2 ) /* turnAround ?? ns */
+ | (0 << 0 ) /* asyncSize 8-bit bus */
+ ;
emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c
index 1819f6b..7a41f0b 100644
--- a/cpu/arm926ejs/interrupts.c
+++ b/cpu/arm926ejs/interrupts.c
@@ -49,7 +49,7 @@ int interrupt_init (void)
{
extern void timer_init(void);
- timer_init();
+ timer_init();
return 0;
}
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index 297efe0..a61fa18 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -175,7 +175,7 @@ stack_setup:
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
@@ -370,7 +370,7 @@ not_used:
irq:
get_irq_stack
irq_save_user_regs
- bl do_irq
+ bl do_irq
irq_restore_user_regs
.align 5
@@ -378,7 +378,7 @@ fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
- bl do_fiq
+ bl do_fiq
irq_restore_user_regs
#else
diff --git a/cpu/arm946es/start.S b/cpu/arm946es/start.S
index e8c908b..9e97f53 100644
--- a/cpu/arm946es/start.S
+++ b/cpu/arm946es/start.S
@@ -167,7 +167,7 @@ stack_setup:
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
@@ -358,7 +358,7 @@ not_used:
irq:
get_irq_stack
irq_save_user_regs
- bl do_irq
+ bl do_irq
irq_restore_user_regs
.align 5
@@ -366,7 +366,7 @@ fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
- bl do_fiq
+ bl do_fiq
irq_restore_user_regs
#else
diff --git a/cpu/arm_intcm/start.S b/cpu/arm_intcm/start.S
index 75fe917..d5778a0 100644
--- a/cpu/arm_intcm/start.S
+++ b/cpu/arm_intcm/start.S
@@ -165,7 +165,7 @@ stack_setup:
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
@@ -339,7 +339,7 @@ not_used:
irq:
get_irq_stack
irq_save_user_regs
- bl do_irq
+ bl do_irq
irq_restore_user_regs
.align 5
@@ -348,7 +348,7 @@ fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
- bl do_fiq
+ bl do_fiq
irq_restore_user_regs
#else
diff --git a/cpu/blackfin/flush.S b/cpu/blackfin/flush.S
index 8072b86..417f798 100644
--- a/cpu/blackfin/flush.S
+++ b/cpu/blackfin/flush.S
@@ -223,7 +223,7 @@ ENDPROC(_dcplb_flush)
.align 4;
page_prefix_table:
-.byte4 0xFFFFFC00; /* 1K */
+.byte4 0xFFFFFC00; /* 1K */
.byte4 0xFFFFF000; /* 4K */
.byte4 0xFFF00000; /* 1M */
.byte4 0xFFC00000; /* 4M */
diff --git a/cpu/blackfin/i2c.c b/cpu/blackfin/i2c.c
index 47be258..60f03d4 100644
--- a/cpu/blackfin/i2c.c
+++ b/cpu/blackfin/i2c.c
@@ -302,7 +302,7 @@ void i2c_init(int speed, int slaveaddr)
* i2c_probe: - Test if a chip answers for a given i2c address
*
* @chip: address of the chip which is searched for
- * @return: 0 if a chip was found, -1 otherwhise
+ * @return: 0 if a chip was found, -1 otherwhise
*/
int i2c_probe(uchar chip)
diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c
index 0dfee51..406d9d0 100644
--- a/cpu/blackfin/serial.c
+++ b/cpu/blackfin/serial.c
@@ -4,7 +4,7 @@
* Copyright (c) 2005-2008 Analog Devices Inc.
*
* Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>,
- * BuyWays B.V. (www.buyways.nl)
+ * BuyWays B.V. (www.buyways.nl)
*
* Based heavily on:
* blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index d0a7341..640b255 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -406,7 +406,7 @@ void reset_timer(void)
ulong get_timer(ulong base)
{
/* fixme: 30 or 33 */
- return read_mmcr_word(SC520_GPTMR0CNT) / 33;
+ return read_mmcr_word(SC520_GPTMR0CNT) / 33;
}
void set_timer(ulong t)
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index 8fc713d..34322ea 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -512,7 +512,7 @@ dram_done:
shrl $2, %eax
movl %eax, %ebx
-bank2: movl (%edi), %eax
+bank2: movl (%edi), %eax
movl %eax, %ecx
andl $0x00800000, %ecx
jz bank1
@@ -520,7 +520,7 @@ bank2: movl (%edi), %eax
shll $6, %eax
movl %eax, %ebx
-bank1: movl (%edi), %eax
+bank1: movl (%edi), %eax
movl %eax, %ecx
andl $0x00008000, %ecx
jz bank0
@@ -528,7 +528,7 @@ bank1: movl (%edi), %eax
shll $14, %eax
movl %eax, %ebx
-bank0: movl (%edi), %eax
+bank0: movl (%edi), %eax
movl %eax, %ecx
andl $0x00000080, %ecx
jz done
@@ -563,7 +563,7 @@ set_ecc:
xorl %eax, %eax
shrl $2, %ecx
cld
- rep stosl
+ rep stosl
/* enable read, write buffers */
movb $0x11, %al
movl $DBCTL, %edi
diff --git a/cpu/i386/start.S b/cpu/i386/start.S
index 51a27aa..264ac09 100644
--- a/cpu/i386/start.S
+++ b/cpu/i386/start.S
@@ -34,8 +34,8 @@
.globl _i386boot_start
_i386boot_start:
_start:
- movl $0x18,%eax /* Load our segement registes, the
- * gdt have already been loaded by start16.S */
+ movl $0x18,%eax /* Load our segement registes, the
+ * gdt have already been loaded by start16.S */
movw %ax,%fs
movw %ax,%ds
movw %ax,%gs
@@ -76,7 +76,7 @@ mem_init_ret:
movl $.progress0a, %ebp
jmp show_boot_progress
.progress0a:
- jmp die
+ jmp die
mem_ok:
/* indicate progress */
@@ -138,7 +138,7 @@ data_fail:
movl $.progress2a, %ebp
jmp show_boot_progress
.progress2a:
- jmp die
+ jmp die
data_ok:
@@ -162,7 +162,7 @@ bss:
movl $0, (%edi)
add $4, %edi
loop bss
- jmp bss_ok
+ jmp bss_ok
bss_fail:
/* indicate (lack of) progress */
@@ -170,7 +170,7 @@ bss_fail:
movl $.progress3a, %ebp
jmp show_boot_progress
.progress3a:
- jmp die
+ jmp die
bss_ok:
diff --git a/cpu/i386/start16.S b/cpu/i386/start16.S
index 239f2ff..1ebb6bc 100644
--- a/cpu/i386/start16.S
+++ b/cpu/i386/start16.S
@@ -39,74 +39,74 @@ start16:
board_init16_ret:
/* Turn of cache (this might require a 486-class CPU) */
- movl %cr0, %eax
- orl $0x60000000,%eax
- movl %eax, %cr0
+ movl %cr0, %eax
+ orl $0x60000000,%eax
+ movl %eax, %cr0
wbinvd
/* load the descriptor tables */
o32 cs lidt idt_ptr
-o32 cs lgdt gdt_ptr
+o32 cs lgdt gdt_ptr
/* Now, we enter protected mode */
- movl %cr0, %eax
- orl $1,%eax
- movl %eax, %cr0
+ movl %cr0, %eax
+ orl $1,%eax
+ movl %eax, %cr0
/* Flush the prefetch queue */
- jmp ff
+ jmp ff
ff:
/* Finally jump to the 32bit initialization code */
movw $code32start, %ax
- movw %ax,%bp
+ movw %ax,%bp
o32 cs ljmp *(%bp)
/* 48-bit far pointer */
code32start:
- .long _start /* offset */
- .word 0x10 /* segment */
+ .long _start /* offset */
+ .word 0x10 /* segment */
idt_ptr:
- .word 0 /* limit */
- .long 0 /* base */
+ .word 0 /* limit */
+ .long 0 /* base */
gdt_ptr:
- .word 0x30 /* limit (48 bytes = 6 GDT entries) */
- .long BOOT_SEG + gdt /* base */
+ .word 0x30 /* limit (48 bytes = 6 GDT entries) */
+ .long BOOT_SEG + gdt /* base */
/* The GDT table ...
*
- * Selector Type
- * 0x00 NULL
- * 0x08 Unused
+ * Selector Type
+ * 0x00 NULL
+ * 0x08 Unused
* 0x10 32bit code
* 0x18 32bit data/stack
* 0x20 16bit code
- * 0x28 16bit data/stack
+ * 0x28 16bit data/stack
*/
gdt:
- .word 0, 0, 0, 0 /* NULL */
- .word 0, 0, 0, 0 /* unused */
-
- .word 0xFFFF /* 4Gb - (0x100000*0x1000 = 4Gb) */
- .word 0 /* base address = 0 */
- .word 0x9B00 /* code read/exec */
- .word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
-
- .word 0xFFFF /* 4Gb - (0x100000*0x1000 = 4Gb) */
- .word 0x0 /* base address = 0 */
- .word 0x9300 /* data read/write */
- .word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
-
- .word 0xFFFF /* 64kb */
- .word 0 /* base address = 0 */
- .word 0x9b00 /* data read/write */
- .word 0x0010 /* granularity = 1 (+5th nibble of limit) */
-
- .word 0xFFFF /* 64kb */
- .word 0 /* base address = 0 */
- .word 0x9300 /* data read/write */
- .word 0x0010 /* granularity = 1 (+5th nibble of limit) */
+ .word 0, 0, 0, 0 /* NULL */
+ .word 0, 0, 0, 0 /* unused */
+
+ .word 0xFFFF /* 4Gb - (0x100000*0x1000 = 4Gb) */
+ .word 0 /* base address = 0 */
+ .word 0x9B00 /* code read/exec */
+ .word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
+
+ .word 0xFFFF /* 4Gb - (0x100000*0x1000 = 4Gb) */
+ .word 0x0 /* base address = 0 */
+ .word 0x9300 /* data read/write */
+ .word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
+
+ .word 0xFFFF /* 64kb */
+ .word 0 /* base address = 0 */
+ .word 0x9b00 /* data read/write */
+ .word 0x0010 /* granularity = 1 (+5th nibble of limit) */
+
+ .word 0xFFFF /* 64kb */
+ .word 0 /* base address = 0 */
+ .word 0x9300 /* data read/write */
+ .word 0x0010 /* granularity = 1 (+5th nibble of limit) */
diff --git a/cpu/ixp/npe/IxEthAcc.c b/cpu/ixp/npe/IxEthAcc.c
index d981649..061b24b 100644
--- a/cpu/ixp/npe/IxEthAcc.c
+++ b/cpu/ixp/npe/IxEthAcc.c
@@ -215,7 +215,7 @@ PUBLIC IxEthAccStatus ixEthAccPortInit( IxEthAccPortId portId)
if ( ! IX_ETH_ACC_IS_SERVICE_INITIALIZED() )
{
- return(IX_ETH_ACC_FAIL);
+ return(IX_ETH_ACC_FAIL);
}
/*
@@ -235,8 +235,8 @@ PUBLIC IxEthAccStatus ixEthAccPortInit( IxEthAccPortId portId)
if ( IX_ETH_IS_PORT_INITIALIZED(portId) )
{
- /* Already initialized */
- return(IX_ETH_ACC_FAIL);
+ /* Already initialized */
+ return(IX_ETH_ACC_FAIL);
}
if(ixEthAccMacInit(portId)!=IX_ETH_ACC_SUCCESS)
diff --git a/cpu/ixp/npe/IxEthAccCommon.c b/cpu/ixp/npe/IxEthAccCommon.c
index bda2c44..211203d 100644
--- a/cpu/ixp/npe/IxEthAccCommon.c
+++ b/cpu/ixp/npe/IxEthAccCommon.c
@@ -96,7 +96,7 @@ extern IxEthAccInfo ixEthAccDataInfo;
IX_ETH_ACC_PRIVATE
IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate =
{
- IX_ETH_ACC_RX_FRAME_ETH_Q, /**< Queue ID */
+ IX_ETH_ACC_RX_FRAME_ETH_Q, /**< Queue ID */
"Eth Rx Q",
ixEthRxFrameQMCallback, /**< Functional callback */
(IxQMgrCallbackId) 0, /**< Callback tag */
@@ -104,7 +104,7 @@ IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate =
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
TRUE, /**< Enable Q notification at startup */
IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
+ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */
};
@@ -116,7 +116,7 @@ IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate =
IX_ETH_ACC_PRIVATE
IxEthAccQregInfo ixEthAccQmgrRxSmallTemplate =
{
- IX_ETH_ACC_RX_FRAME_ETH_Q, /**< Queue ID */
+ IX_ETH_ACC_RX_FRAME_ETH_Q, /**< Queue ID */
"Eth Rx Q",
ixEthRxFrameQMCallback, /**< Functional callback */
(IxQMgrCallbackId) 0, /**< Callback tag */
@@ -124,7 +124,7 @@ IxEthAccQregInfo ixEthAccQmgrRxSmallTemplate =
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
TRUE, /**< Enable Q notification at startup */
IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
+ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */
};
@@ -146,7 +146,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE, /**< Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /***< Q Low water mark */
+ IX_QMGR_Q_WM_LEVEL0, /***< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
},
@@ -159,7 +159,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE, /**< Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
+ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
},
#ifdef __ixp46X
@@ -172,7 +172,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE, /**< Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
+ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
},
#endif
@@ -185,7 +185,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE, /**< Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
+ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
},
@@ -198,7 +198,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE, /**< Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
+ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
},
#ifdef __ixp46X
@@ -211,7 +211,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
IX_QMGR_Q_ENTRY_SIZE1, /** Queue Entry Sizes - all Q entries are single ord entries */
FALSE, /** Disable Q notification at startup */
IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE, /** Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /* No queues use almost empty */
+ IX_QMGR_Q_WM_LEVEL0, /* No queues use almost empty */
IX_QMGR_Q_WM_LEVEL64, /** Q High water mark - needed used */
},
#endif
@@ -224,7 +224,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
TRUE, /**< Enable Q notification at startup */
IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE, /**< Q Condition to drive callback */
- IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
+ IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL2, /**< Q High water mark - needed by NPE */
},
diff --git a/cpu/ixp/npe/IxEthAccDataPlane.c b/cpu/ixp/npe/IxEthAccDataPlane.c
index e46fc9b..b62f0d0 100644
--- a/cpu/ixp/npe/IxEthAccDataPlane.c
+++ b/cpu/ixp/npe/IxEthAccDataPlane.c
@@ -544,7 +544,7 @@ ixEthAccMbufFromRxQ(IX_OSAL_MBUF *mbuf)
IX_OSAL_MBUF_MLEN(ptr) = (len >> IX_ETHNPE_ACC_LENGTH_OFFSET);
/* get the next pointer */
- PTR_NPE2VIRT(IX_OSAL_MBUF *,IX_ETHACC_NE_NEXT(ptr), nextPtr);
+ PTR_NPE2VIRT(IX_OSAL_MBUF *,IX_ETHACC_NE_NEXT(ptr), nextPtr);
if (nextPtr != NULL)
{
nextPtr = (IX_OSAL_MBUF *)((UINT8 *)nextPtr - offsetof(IX_OSAL_MBUF,ix_ne));
diff --git a/cpu/ixp/npe/IxEthAccMac.c b/cpu/ixp/npe/IxEthAccMac.c
index d57e716..369ee91 100644
--- a/cpu/ixp/npe/IxEthAccMac.c
+++ b/cpu/ixp/npe/IxEthAccMac.c
@@ -2423,14 +2423,14 @@ ixEthAccMacStateUpdate(IxEthAccPortId portId)
REG_READ(ixEthAccMacBase[portId],
IX_ETH_ACC_MAC_RX_CNTRL1,
regval);
- REG_WRITE(ixEthAccMacBase[portId],
+ REG_WRITE(ixEthAccMacBase[portId],
IX_ETH_ACC_MAC_RX_CNTRL1,
regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN);
REG_READ(ixEthAccMacBase[portId],
IX_ETH_ACC_MAC_TX_CNTRL1,
regval);
- REG_WRITE(ixEthAccMacBase[portId],
+ REG_WRITE(ixEthAccMacBase[portId],
IX_ETH_ACC_MAC_TX_CNTRL1,
regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN);
}
@@ -2493,7 +2493,7 @@ ixEthAccMacStateUpdate(IxEthAccPortId portId)
REG_READ(ixEthAccMacBase[portId],
IX_ETH_ACC_MAC_TX_CNTRL1,
regval);
- REG_WRITE(ixEthAccMacBase[portId],
+ REG_WRITE(ixEthAccMacBase[portId],
IX_ETH_ACC_MAC_TX_CNTRL1,
regval | IX_ETH_ACC_TX_CNTRL1_TX_EN);
}
diff --git a/cpu/ixp/npe/IxEthAccMii.c b/cpu/ixp/npe/IxEthAccMii.c
index 86368a4..d282aa6 100644
--- a/cpu/ixp/npe/IxEthAccMii.c
+++ b/cpu/ixp/npe/IxEthAccMii.c
@@ -324,7 +324,7 @@ ixEthAccMiiWriteRtn (UINT8 phyAddr,
/*The "GO" bit is reset to 0 when the write completes*/
if((regval & IX_ETH_ACC_MII_GO) == 0x0)
- {
+ {
break;
}
/* Sleep for a while */
diff --git a/cpu/ixp/npe/IxNpeDlImageMgr.c b/cpu/ixp/npe/IxNpeDlImageMgr.c
index 75b42f2..ccc0da7 100644
--- a/cpu/ixp/npe/IxNpeDlImageMgr.c
+++ b/cpu/ixp/npe/IxNpeDlImageMgr.c
@@ -164,7 +164,7 @@ ixNpeDlImageMgrImageIdCompare (IxNpeDlImageId *imageIdA,
PRIVATE BOOL
ixNpeDlImageMgrNpeFunctionIdCompare (IxNpeDlImageId *imageIdA,
- IxNpeDlImageId *imageIdB);
+ IxNpeDlImageId *imageIdB);
#if 0
PRIVATE IX_STATUS
diff --git a/cpu/ixp/npe/IxNpeDlNpeMgrUtils.c b/cpu/ixp/npe/IxNpeDlNpeMgrUtils.c
index 9dcf3c1..18cac50 100644
--- a/cpu/ixp/npe/IxNpeDlNpeMgrUtils.c
+++ b/cpu/ixp/npe/IxNpeDlNpeMgrUtils.c
@@ -613,9 +613,9 @@ ixNpeDlNpeMgrLogicalRegWrite (
if (verify)
{
- status = ixNpeDlNpeMgrLogicalRegRead (npeBaseAddress, regAddr,
- regSize, ctxtNum, &retRegVal);
-
+ status = ixNpeDlNpeMgrLogicalRegRead (npeBaseAddress, regAddr,
+ regSize, ctxtNum, &retRegVal);
+
if (IX_SUCCESS == status)
{
if (regVal != retRegVal)
diff --git a/cpu/ixp/npe/IxOsalIoMem.c b/cpu/ixp/npe/IxOsalIoMem.c
index 9e540c1..34df92b 100644
--- a/cpu/ixp/npe/IxOsalIoMem.c
+++ b/cpu/ixp/npe/IxOsalIoMem.c
@@ -281,7 +281,7 @@ ixOsalIoMemUnmap (UINT32 requestedAddress, UINT32 endianType)
* Return value: corresponding physical address, or NULL
* if there is no physical address addressable
* by the given virtual address
- * OS: VxWorks, Linux, WinCE, QNX, eCos
+ * OS: VxWorks, Linux, WinCE, QNX, eCos
* Reentrant: Yes
* IRQ safe: Yes
*/
@@ -310,7 +310,7 @@ ixOsalIoMemVirtToPhys (UINT32 virtualAddress, UINT32 requestedCoherency)
* Return value: corresponding physical address, or NULL
* if there is no physical address addressable
* by the given virtual address
- * OS: VxWorks, Linux, WinCE, QNX, eCos
+ * OS: VxWorks, Linux, WinCE, QNX, eCos
* Reentrant: Yes
* IRQ safe: Yes
*/
diff --git a/cpu/ixp/npe/IxQMgrAqmIf.c b/cpu/ixp/npe/IxQMgrAqmIf.c
index b27b3a2..7386513 100644
--- a/cpu/ixp/npe/IxQMgrAqmIf.c
+++ b/cpu/ixp/npe/IxQMgrAqmIf.c
@@ -209,7 +209,7 @@ ixQMgrAqmIfInit (void)
*/
/* AQM Queue access reg addresses, per queue */
- ixQMgrAqmIfQueAccRegAddr[i] =
+ ixQMgrAqmIfQueAccRegAddr[i] =
(UINT32 *)(aqmBaseAddress + IX_QMGR_Q_ACCESS_ADDR_GET(i));
ixQMgrQInlinedReadWriteInfo[i].qAccRegAddr =
(volatile UINT32 *)(aqmBaseAddress + IX_QMGR_Q_ACCESS_ADDR_GET(i));
diff --git a/cpu/ixp/npe/IxQMgrQAccess.c b/cpu/ixp/npe/IxQMgrQAccess.c
index 2c3e302..8885736 100644
--- a/cpu/ixp/npe/IxQMgrQAccess.c
+++ b/cpu/ixp/npe/IxQMgrQAccess.c
@@ -360,7 +360,7 @@ ixQMgrQNumEntriesGet (IxQMgrQId qId,
}
else
{
- /* The queue is either empty, either moving,
+ /* The queue is either empty, either moving,
* Client can retry if they wish
*/
*numEntriesPtr = 0;
diff --git a/cpu/ixp/npe/include/IxDmaAcc.h b/cpu/ixp/npe/include/IxDmaAcc.h
index 53d2625..45c7527 100644
--- a/cpu/ixp/npe/include/IxDmaAcc.h
+++ b/cpu/ixp/npe/include/IxDmaAcc.h
@@ -172,7 +172,7 @@ typedef UINT32 IxDmaAccRequestId;
#define IX_DMA_REQUEST_FULL 16
/**
- * @ingroup IxDmaAcc
+ * @ingroup IxDmaAcc
* @brief DMA completion notification
* This function is called to notify a client that the DMA has been completed
* @param status @ref IxDmaReturnStatus [out] - reporting to client
@@ -181,11 +181,11 @@ typedef UINT32 IxDmaAccRequestId;
typedef void (*IxDmaAccDmaCompleteCallback) (IxDmaReturnStatus status);
/**
- * @ingroup IxDmaAcc
+ * @ingroup IxDmaAcc
*
* @fn ixDmaAccInit(IxNpeDlNpeId npeId)
*
- * @brief Initialise the DMA Access component
+ * @brief Initialise the DMA Access component
* This function will initialise the DMA Access component internals
* @param npeId @ref IxNpeDlNpeId [in] - NPE to use for Dma Transfer
* @return @li IX_SUCCESS succesfully initialised the component
@@ -196,7 +196,7 @@ PUBLIC IX_STATUS
ixDmaAccInit(IxNpeDlNpeId npeId);
/**
- * @ingroup IxDmaAcc
+ * @ingroup IxDmaAcc
*
* @fn ixDmaAccDmaTransfer(
IxDmaAccDmaCompleteCallback callback,
@@ -225,8 +225,8 @@ ixDmaAccInit(IxNpeDlNpeId npeId);
* @param AddressingMode @ref IxDmaAddressingMode [in] - The DMA addressing mode
* @param TransferWidth @ref IxDmaTransferWidth [in] - The DMA transfer width
*
- * @return @li IX_DMA_SUCCESS Notification that the DMA request is succesful
- * @return @li IX_DMA_FAIL IxDmaAcc not yet initialised or some internal error has occured
+ * @return @li IX_DMA_SUCCESS Notification that the DMA request is succesful
+ * @return @li IX_DMA_FAIL IxDmaAcc not yet initialised or some internal error has occured
* @return @li IX_DMA_INVALID_TRANSFER_WIDTH Transfer width is nit valid
* @return @li IX_DMA_INVALID_TRANSFER_LENGTH Transfer length outside of valid range
* @return @li IX_DMA_INVALID_TRANSFER_MODE Transfer Mode not valid
diff --git a/cpu/ixp/npe/include/IxEthAcc.h b/cpu/ixp/npe/include/IxEthAcc.h
index b424648..ff706c4 100644
--- a/cpu/ixp/npe/include/IxEthAcc.h
+++ b/cpu/ixp/npe/include/IxEthAcc.h
@@ -626,8 +626,8 @@ PUBLIC void ixEthAccUnload(void);
* required features.
*
* Dependant on Services: (Must be initialized before using this service may be initialized)
- * ixNPEmh - NPE Message handling service.
- * ixQmgr - Queue Manager component.
+ * ixNPEmh - NPE Message handling service.
+ * ixQmgr - Queue Manager component.
*
* @param portId @ref IxEthAccPortId [in]
*
@@ -745,7 +745,7 @@ typedef void (*IxEthAccPortTxDoneCallback) ( UINT32 callbackTag, IX_OSAL_MBUF *b
*
* @fn ixEthAccPortTxDoneCallbackRegister( IxEthAccPortId portId,
IxEthAccPortTxDoneCallback txCallbackFn,
- UINT32 callbackTag)
+ UINT32 callbackTag)
*
* @brief Register a callback function to allow
* the transmitted buffers to return to the user.
diff --git a/cpu/ixp/npe/include/IxEthAccMii_p.h b/cpu/ixp/npe/include/IxEthAccMii_p.h
index aa42f9c..568d4a0 100644
--- a/cpu/ixp/npe/include/IxEthAccMii_p.h
+++ b/cpu/ixp/npe/include/IxEthAccMii_p.h
@@ -81,13 +81,13 @@
#define IX_ETH_ACC_MII_STAT_REG 0x1 /* Status Register */
#define IX_ETH_ACC_MII_PHY_ID1_REG 0x2 /* PHY identifier 1 Register */
#define IX_ETH_ACC_MII_PHY_ID2_REG 0x3 /* PHY identifier 2 Register */
-#define IX_ETH_ACC_MII_AN_ADS_REG 0x4 /* Auto-Negotiation */
+#define IX_ETH_ACC_MII_AN_ADS_REG 0x4 /* Auto-Negotiation */
/* Advertisement Register */
-#define IX_ETH_ACC_MII_AN_PRTN_REG 0x5 /* Auto-Negotiation */
+#define IX_ETH_ACC_MII_AN_PRTN_REG 0x5 /* Auto-Negotiation */
/* partner ability Register */
#define IX_ETH_ACC_MII_AN_EXP_REG 0x6 /* Auto-Negotiation */
/* Expansion Register */
-#define IX_ETH_ACC_MII_AN_NEXT_REG 0x7 /* Auto-Negotiation */
+#define IX_ETH_ACC_MII_AN_NEXT_REG 0x7 /* Auto-Negotiation */
/* next-page transmit Register */
IxEthAccStatus ixEthAccMdioShow (void);
diff --git a/cpu/ixp/npe/include/IxEthAcc_p.h b/cpu/ixp/npe/include/IxEthAcc_p.h
index 37c5560..0ee4123 100644
--- a/cpu/ixp/npe/include/IxEthAcc_p.h
+++ b/cpu/ixp/npe/include/IxEthAcc_p.h
@@ -262,7 +262,7 @@ typedef struct
{
IxEthAccPortTxDoneCallback txBufferDoneCallbackFn;
UINT32 txCallbackTag;
- IxEthAccDataPlaneQList txQ[IX_ETH_ACC_NUM_TX_PRIORITIES]; /**< Transmit Q */
+ IxEthAccDataPlaneQList txQ[IX_ETH_ACC_NUM_TX_PRIORITIES]; /**< Transmit Q */
IxEthAccSchedulerDiscipline schDiscipline; /**< Transmit Xscale QoS */
IxQMgrQId txQueue; /**< txQueue for this port */
IxEthAccTxDataStats stats; /**< Transmit s/w stats */
diff --git a/cpu/ixp/npe/include/IxEthMii.h b/cpu/ixp/npe/include/IxEthMii.h
index a1bfe06..397253a 100644
--- a/cpu/ixp/npe/include/IxEthMii.h
+++ b/cpu/ixp/npe/include/IxEthMii.h
@@ -106,9 +106,9 @@ PUBLIC IX_STATUS ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount);
* @ingroup IxEthMii
*
* @fn ixEthMiiPhyConfig(UINT32 phyAddr,
- BOOL speed100,
- BOOL fullDuplex,
- BOOL autonegotiate)
+ BOOL speed100,
+ BOOL fullDuplex,
+ BOOL autonegotiate)
*
*
* @brief Configure a PHY
@@ -209,10 +209,10 @@ PUBLIC IX_STATUS ixEthMiiPhyReset(UINT32 phyAddr);
* @ingroup IxEthMii
*
* @fn ixEthMiiLinkStatus(UINT32 phyAddr,
- BOOL *linkUp,
- BOOL *speed100,
- BOOL *fullDuplex,
- BOOL *autoneg)
+ BOOL *linkUp,
+ BOOL *speed100,
+ BOOL *fullDuplex,
+ BOOL *autoneg)
*
* @brief Retrieve the current status of a PHY
* Retrieve the link, speed, duplex and autonegotiation status of a PHY
diff --git a/cpu/ixp/npe/include/IxI2cDrv.h b/cpu/ixp/npe/include/IxI2cDrv.h
index 2472f31..92c6b24 100644
--- a/cpu/ixp/npe/include/IxI2cDrv.h
+++ b/cpu/ixp/npe/include/IxI2cDrv.h
@@ -64,8 +64,8 @@
/**
* @ingroup IxI2cDrv
* @brief The interval of micro/mili seconds the IXP will wait before it polls for
- * status from the ixI2cIntrXferStatus; Every 20us is 1 byte @
- * 400Kbps and 4 bytes @ 100Kbps. This is dependent on delay type selected
+ * status from the ixI2cIntrXferStatus; Every 20us is 1 byte @
+ * 400Kbps and 4 bytes @ 100Kbps. This is dependent on delay type selected
* through the API ixI2cDrvDelayTypeSelect.
*/
#define IX_I2C_US_POLL_FOR_XFER_STATUS 20
diff --git a/cpu/ixp/npe/include/IxOsalAssert.h b/cpu/ixp/npe/include/IxOsalAssert.h
index 45cebcd..04a4f51 100644
--- a/cpu/ixp/npe/include/IxOsalAssert.h
+++ b/cpu/ixp/npe/include/IxOsalAssert.h
@@ -1,6 +1,6 @@
/*
* @file IxOsalAssert.h
- * @author Intel Corporation
+ * @author Intel Corporation
* @date 25-08-2004
*
* @brief description goes here
diff --git a/cpu/ixp/npe/include/IxOsalBackwardBufferMgt.h b/cpu/ixp/npe/include/IxOsalBackwardBufferMgt.h
index 5ac3f0c..4cf80d3 100644
--- a/cpu/ixp/npe/include/IxOsalBackwardBufferMgt.h
+++ b/cpu/ixp/npe/include/IxOsalBackwardBufferMgt.h
@@ -76,7 +76,7 @@ typedef IX_OSAL_MBUF_POOL IX_MBUF_POOL;
#define IX_MBUF_MTYPE(m_blk_ptr) \
IX_OSAL_MBUF_MTYPE(m_blk_ptr)
-#define IX_MBUF_FLAGS(m_blk_ptr) \
+#define IX_MBUF_FLAGS(m_blk_ptr) \
IX_OSAL_MBUF_FLAGS(m_blk_ptr)
diff --git a/cpu/ixp/npe/include/IxOsalBackwardMemMap.h b/cpu/ixp/npe/include/IxOsalBackwardMemMap.h
index 18f8f24..3881a3b 100644
--- a/cpu/ixp/npe/include/IxOsalBackwardMemMap.h
+++ b/cpu/ixp/npe/include/IxOsalBackwardMemMap.h
@@ -136,6 +136,6 @@
#define IX_OSSERV_MEM_MAP(physAddr, size) IX_OSAL_MEM_MAP(physAddr, size)
-#define IX_OSSERV_MEM_UNMAP(virtAddr) IX_OSAL_MEM_UNMAP(virtAddr)
+#define IX_OSSERV_MEM_UNMAP(virtAddr) IX_OSAL_MEM_UNMAP(virtAddr)
#endif /* IX_OSAL_BACKWARD_MEM_MAP_H */
diff --git a/cpu/ixp/npe/include/IxOsalIoMem.h b/cpu/ixp/npe/include/IxOsalIoMem.h
index ac0ce65..ea6d64d 100644
--- a/cpu/ixp/npe/include/IxOsalIoMem.h
+++ b/cpu/ixp/npe/include/IxOsalIoMem.h
@@ -1,6 +1,6 @@
/*
* @file IxOsalIoMem.h
- * @author Intel Corporation
+ * @author Intel Corporation
* @date 25-08-2004
*
* @brief description goes here
diff --git a/cpu/ixp/npe/include/IxOsalMemAccess.h b/cpu/ixp/npe/include/IxOsalMemAccess.h
index 2ad0ccf..9e7fb87 100644
--- a/cpu/ixp/npe/include/IxOsalMemAccess.h
+++ b/cpu/ixp/npe/include/IxOsalMemAccess.h
@@ -410,7 +410,7 @@ ixOsalDataCoherentShortWriteSwap (volatile UINT16 * sAddr, UINT16 sData)
#define IX_OSAL_READ_LONG(wAddr) IX_OSAL_READ_LONG_BE(wAddr)
#define IX_OSAL_READ_SHORT(sAddr) IX_OSAL_READ_SHORT_BE(sAddr)
#define IX_OSAL_READ_BYTE(bAddr) IX_OSAL_READ_BYTE_BE(bAddr)
-#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_BE(wAddr, wData)
+#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_BE(wAddr, wData)
#define IX_OSAL_WRITE_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_BE(sAddr, sData)
#define IX_OSAL_WRITE_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_BE(bAddr, bData)
@@ -419,7 +419,7 @@ ixOsalDataCoherentShortWriteSwap (volatile UINT16 * sAddr, UINT16 sData)
#define IX_OSAL_READ_LONG(wAddr) IX_OSAL_READ_LONG_LE_AC(wAddr)
#define IX_OSAL_READ_SHORT(sAddr) IX_OSAL_READ_SHORT_LE_AC(sAddr)
#define IX_OSAL_READ_BYTE(bAddr) IX_OSAL_READ_BYTE_LE_AC(bAddr)
-#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_LE_AC(wAddr, wData)
+#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_LE_AC(wAddr, wData)
#define IX_OSAL_WRITE_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_LE_AC(sAddr, sData)
#define IX_OSAL_WRITE_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_LE_AC(bAddr, bData)
@@ -428,7 +428,7 @@ ixOsalDataCoherentShortWriteSwap (volatile UINT16 * sAddr, UINT16 sData)
#define IX_OSAL_READ_LONG(wAddr) IX_OSAL_READ_LONG_LE_DC(wAddr)
#define IX_OSAL_READ_SHORT(sAddr) IX_OSAL_READ_SHORT_LE_DC(sAddr)
#define IX_OSAL_READ_BYTE(bAddr) IX_OSAL_READ_BYTE_LE_DC(bAddr)
-#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_LE_DC(wAddr, wData)
+#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_LE_DC(wAddr, wData)
#define IX_OSAL_WRITE_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_LE_DC(sAddr, sData)
#define IX_OSAL_WRITE_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_LE_DC(bAddr, bData)
diff --git a/cpu/ixp/npe/include/IxOsalTypes.h b/cpu/ixp/npe/include/IxOsalTypes.h
index c617ec5..a190a70 100644
--- a/cpu/ixp/npe/include/IxOsalTypes.h
+++ b/cpu/ixp/npe/include/IxOsalTypes.h
@@ -175,7 +175,7 @@ typedef volatile INT32 VINT32;
#ifndef __inline__
-#define __inline__ IX_OSAL_INLINE
+#define __inline__ IX_OSAL_INLINE
#endif
diff --git a/cpu/ixp/npe/include/IxQMgr.h b/cpu/ixp/npe/include/IxQMgr.h
index c083a2b..165ed96 100644
--- a/cpu/ixp/npe/include/IxQMgr.h
+++ b/cpu/ixp/npe/include/IxQMgr.h
@@ -1134,7 +1134,7 @@ ixQMgrQRead (IxQMgrQId qId,
* day scenario there are many entries in the queue
* and the counter does not reach zero.
*/
- if (infoPtr->qReadCount-- == 0)
+ if (infoPtr->qReadCount-- == 0)
{
/* There is maybe no entry in the queue
* qReadCount is now negative, but will be corrected before
@@ -1475,7 +1475,7 @@ ixQMgrQWrite (IxQMgrQId qId,
++entry;
IX_QMGR_INLINE_WRITE_LONG(++qAccRegAddr, *entry);
}
- entrySize = infoPtr->qEntrySizeInWords;
+ entrySize = infoPtr->qEntrySizeInWords;
}
/* overflow is available for lower queues only */
diff --git a/cpu/ixp/npe/include/IxQMgrAqmIf_p.h b/cpu/ixp/npe/include/IxQMgrAqmIf_p.h
index 7f5733c..4f0f64d 100644
--- a/cpu/ixp/npe/include/IxQMgrAqmIf_p.h
+++ b/cpu/ixp/npe/include/IxQMgrAqmIf_p.h
@@ -498,7 +498,7 @@ ixQMgrAqmIfQPop (IxQMgrQId qId,
volatile UINT32 *accRegAddr;
accRegAddr = (UINT32*)(aqmBaseAddress +
- IX_QMGR_Q_ACCESS_ADDR_GET(qId));
+ IX_QMGR_Q_ACCESS_ADDR_GET(qId));
switch (numWords)
{
@@ -533,7 +533,7 @@ ixQMgrAqmIfQPush (IxQMgrQId qId,
volatile UINT32 *accRegAddr;
accRegAddr = (UINT32*)(aqmBaseAddress +
- IX_QMGR_Q_ACCESS_ADDR_GET(qId));
+ IX_QMGR_Q_ACCESS_ADDR_GET(qId));
switch (numWords)
{
@@ -683,9 +683,9 @@ ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId,
* multiple queues split accross registers
*/
registerAddress = (UINT32*)(aqmBaseAddress +
- registerBaseAddrOffset +
- ((qId / queuesPerRegWord) *
- IX_QMGR_NUM_BYTES_PER_WORD));
+ registerBaseAddrOffset +
+ ((qId / queuesPerRegWord) *
+ IX_QMGR_NUM_BYTES_PER_WORD));
/*
* Get the status word
diff --git a/cpu/ixp/npe/include/IxQueueAssignments.h b/cpu/ixp/npe/include/IxQueueAssignments.h
index 0c1543f..f7194e7 100644
--- a/cpu/ixp/npe/include/IxQueueAssignments.h
+++ b/cpu/ixp/npe/include/IxQueueAssignments.h
@@ -409,7 +409,7 @@
* @note THIS IS NOT USED - the Rx queues are read from EthDB QoS configuration
*
*/
-#define IX_ETH_ACC_RX_FRAME_ETH_Q (IX_QMGR_QUEUE_4)
+#define IX_ETH_ACC_RX_FRAME_ETH_Q (IX_QMGR_QUEUE_4)
/**
*
diff --git a/cpu/ixp/pci.c b/cpu/ixp/pci.c
index 84c4339..8c6b0b2 100644
--- a/cpu/ixp/pci.c
+++ b/cpu/ixp/pci.c
@@ -259,7 +259,7 @@ void pci_ixp_init (struct pci_controller *hose)
/*
==========================================================
- Init IXP PCI
+ Init IXP PCI
==========================================================
*/
REG_READ (PCI_CSR_BASE, PCI_CSR_OFFSET, regval);
diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S
index 757cfaa..d4c8e33 100644
--- a/cpu/ixp/start.S
+++ b/cpu/ixp/start.S
@@ -140,7 +140,7 @@ reset:
CPWAIT r0
/* invalidate I & Data TLB */
- mcr p15, 0, r0, c8, c7, 0
+ mcr p15, 0, r0, c8, c7, 0
CPWAIT r0
/* drain write and fill buffers */
@@ -160,22 +160,22 @@ reset:
/* make sure flash is visible at 0 */
#if 0
- ldr r2, =IXP425_EXP_CFG0
+ ldr r2, =IXP425_EXP_CFG0
ldr r1, [r2]
orr r1, r1, #0x80000000
str r1, [r2]
#endif
- mov r1, #CFG_SDR_CONFIG
+ mov r1, #CFG_SDR_CONFIG
ldr r2, =IXP425_SDR_CONFIG
str r1, [r2]
/* disable refresh cycles */
- mov r1, #0
+ mov r1, #0
ldr r3, =IXP425_SDR_REFRESH
str r1, [r3]
/* send nop command */
- mov r1, #3
+ mov r1, #3
ldr r4, =IXP425_SDR_IR
str r1, [r4]
DELAY_FOR 0x4000, r0
@@ -226,7 +226,7 @@ reset:
CPWAIT r0
/* invalidate I & Data TLB */
- mcr p15, 0, r0, c8, c7, 0
+ mcr p15, 0, r0, c8, c7, 0
CPWAIT r0
/* drain write and fill buffers */
@@ -234,7 +234,7 @@ reset:
CPWAIT r0
/* move flash to 0x50000000 */
- ldr r2, =IXP425_EXP_CFG0
+ ldr r2, =IXP425_EXP_CFG0
ldr r1, [r2]
bic r1, r1, #0x80000000
str r1, [r2]
@@ -247,7 +247,7 @@ reset:
nop
/* invalidate I & Data TLB */
- mcr p15, 0, r0, c8, c7, 0
+ mcr p15, 0, r0, c8, c7, 0
CPWAIT r0
/* enable I cache */
@@ -293,7 +293,7 @@ stack_setup:
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
@@ -482,13 +482,13 @@ fiq:
.globl reset_cpu
reset_cpu:
- ldr r1, =0x482e
+ ldr r1, =0x482e
ldr r2, =IXP425_OSWK
str r1, [r2]
- ldr r1, =0x0fff
+ ldr r1, =0x0fff
ldr r2, =IXP425_OSWT
str r1, [r2]
- ldr r1, =0x5
+ ldr r1, =0x5
ldr r2, =IXP425_OSWE
str r1, [r2]
b reset_endless
diff --git a/cpu/leon2/start.S b/cpu/leon2/start.S
index 60d3fad..f23f499 100644
--- a/cpu/leon2/start.S
+++ b/cpu/leon2/start.S
@@ -31,10 +31,10 @@
/* Entry for traps which jump to a programmer-specified trap handler. */
#define TRAPR(H) \
- wr %g0, 0xfe0, %psr; \
- mov %g0, %tbr; \
- ba (H); \
- mov %g0, %wim;
+ wr %g0, 0xfe0, %psr; \
+ mov %g0, %tbr; \
+ ba (H); \
+ mov %g0, %wim;
#define TRAP(H) \
mov %psr, %l0; \
@@ -42,10 +42,10 @@
nop; nop;
#define TRAPI(ilevel) \
- mov ilevel, %l7; \
- mov %psr, %l0; \
- b _irq_entry; \
- mov %wim, %l3
+ mov ilevel, %l7; \
+ mov %psr, %l0; \
+ b _irq_entry; \
+ mov %wim, %l3
/* Unexcpected trap will halt the processor by forcing it to error state */
#undef BAD_TRAP
@@ -76,7 +76,7 @@ MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
.section ".start", "ax"
- .globl _start, start, _trap_table
+ .globl _start, start, _trap_table
.globl _irq_entry, nmi_trap
.globl _reset_reloc
@@ -515,7 +515,7 @@ _window_underflow:
nop; nop; nop
restore ! Two restores to get into the
restore ! window to restore
- ld [%sp + 0], %l0; ! Restore window from the stack
+ ld [%sp + 0], %l0; ! Restore window from the stack
ld [%sp + 4], %l1;
ld [%sp + 8], %l2;
ld [%sp + 12], %l3;
@@ -547,7 +547,7 @@ _hwerr:
ta 0
nop
nop
- b _hwerr ! loop infinite
+ b _hwerr ! loop infinite
nop
/* Registers to not touch at all. */
diff --git a/cpu/leon3/start.S b/cpu/leon3/start.S
index 2f1d099..d421898 100644
--- a/cpu/leon3/start.S
+++ b/cpu/leon3/start.S
@@ -31,10 +31,10 @@
/* Entry for traps which jump to a programmer-specified trap handler. */
#define TRAPR(H) \
- wr %g0, 0xfe0, %psr; \
- mov %g0, %tbr; \
- ba (H); \
- mov %g0, %wim;
+ wr %g0, 0xfe0, %psr; \
+ mov %g0, %tbr; \
+ ba (H); \
+ mov %g0, %wim;
#define TRAP(H) \
mov %psr, %l0; \
@@ -42,10 +42,10 @@
nop; nop;
#define TRAPI(ilevel) \
- mov ilevel, %l7; \
- mov %psr, %l0; \
- b _irq_entry; \
- mov %wim, %l3
+ mov ilevel, %l7; \
+ mov %psr, %l0; \
+ b _irq_entry; \
+ mov %wim, %l3
/* Unexcpected trap will halt the processor by forcing it to error state */
#undef BAD_TRAP
@@ -76,7 +76,7 @@ MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
.section ".start", "ax"
- .globl _start, start, _trap_table
+ .globl _start, start, _trap_table
.globl _irq_entry, nmi_trap
.globl _reset_reloc
@@ -118,7 +118,7 @@ _trap_table:
TRAPI(13); ! 1d IRQ level 13
TRAPI(14); ! 1e IRQ level 14
TRAP(_nmi_trap); ! 1f IRQ level 15 /
- ! NMI (non maskable interrupt)
+ ! NMI (non maskable interrupt)
BAD_TRAP; ! 20 r_register_access_error
BAD_TRAP; ! 21 instruction access error
BAD_TRAP; ! 22
@@ -470,7 +470,7 @@ _window_underflow:
nop; nop; nop
restore ! Two restores to get into the
restore ! window to restore
- ld [%sp + 0], %l0; ! Restore window from the stack
+ ld [%sp + 0], %l0; ! Restore window from the stack
ld [%sp + 4], %l1;
ld [%sp + 8], %l2;
ld [%sp + 12], %l3;
@@ -502,7 +502,7 @@ _hwerr:
ta 0
nop
nop
- b _hwerr ! loop infinite
+ b _hwerr ! loop infinite
nop
/* Registers to not touch at all. */
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
index fb748cf..e4655d6 100644
--- a/cpu/lh7a40x/start.S
+++ b/cpu/lh7a40x/start.S
@@ -184,7 +184,7 @@ clear_bss:
@add r0, r0, #4 /* start at first byte of bss */
/* why inc. 4 bytes past then? */
ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
@@ -347,31 +347,31 @@ cpu_init_crit:
undefined_instruction:
get_bad_stack
bad_save_user_regs
- bl do_undefined_instruction
+ bl do_undefined_instruction
.align 5
software_interrupt:
get_bad_stack
bad_save_user_regs
- bl do_software_interrupt
+ bl do_software_interrupt
.align 5
prefetch_abort:
get_bad_stack
bad_save_user_regs
- bl do_prefetch_abort
+ bl do_prefetch_abort
.align 5
data_abort:
get_bad_stack
bad_save_user_regs
- bl do_data_abort
+ bl do_data_abort
.align 5
not_used:
get_bad_stack
bad_save_user_regs
- bl do_not_used
+ bl do_not_used
#ifdef CONFIG_USE_IRQ
@@ -379,7 +379,7 @@ not_used:
irq:
get_irq_stack
irq_save_user_regs
- bl do_irq
+ bl do_irq
irq_restore_user_regs
.align 5
@@ -387,7 +387,7 @@ fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
- bl do_fiq
+ bl do_fiq
irq_restore_user_regs
#else
@@ -396,13 +396,13 @@ fiq:
irq:
get_bad_stack
bad_save_user_regs
- bl do_irq
+ bl do_irq
.align 5
fiq:
get_bad_stack
bad_save_user_regs
- bl do_fiq
+ bl do_fiq
#endif
diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S
index ad04c09..2b638df 100644
--- a/cpu/mcf523x/start.S
+++ b/cpu/mcf523x/start.S
@@ -49,7 +49,7 @@
_vectors:
INITSP: .long 0x00000000 /* Initial SP */
-INITPC: .long _START /* Initial PC */
+INITPC: .long _START /* Initial PC */
vector02: .long _FAULT /* Access Error */
vector03: .long _FAULT /* Address Error */
vector04: .long _FAULT /* Illegal Instruction */
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 2bc0df3..a054904 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -248,14 +248,14 @@ relocate_code:
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
- move.l %a0, %a1
+ move.l %a0, %a1
add.l #(in_ram - CFG_MONITOR_BASE), %a1
jmp (%a1)
in_ram:
clear_bss:
- /*
+ /*
* Now clear BSS segment
*/
move.l %a0, %a1
@@ -416,7 +416,7 @@ icache_enable:
* Note: The 5249 Documentation doesn't give a bit position for CINV!
* From the 5272 and the 5307 documentation, I have deduced that it is
* probably CACR[24]. Should someone say something to Motorola?
- * ~Jeremy
+ * ~Jeremy
*/
move.l #0x01000000, %d0 /* Invalidate whole cache */
move.c %d0,%CACR
diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S
index a524f70..c806f7a 100644
--- a/cpu/mcf532x/start.S
+++ b/cpu/mcf532x/start.S
@@ -49,7 +49,7 @@
_vectors:
INITSP: .long 0x00000000 /* Initial SP */
-INITPC: .long _START /* Initial PC */
+INITPC: .long _START /* Initial PC */
vector02: .long _FAULT /* Access Error */
vector03: .long _FAULT /* Address Error */
vector04: .long _FAULT /* Illegal Instruction */
diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S
index 0c5194a..3241b27 100644
--- a/cpu/mcf5445x/start.S
+++ b/cpu/mcf5445x/start.S
@@ -54,7 +54,7 @@
_vectors:
INITSP: .long 0x00000000 /* Initial SP */
-INITPC: .long _START /* Initial PC */
+INITPC: .long _START /* Initial PC */
vector02: .long _FAULT /* Access Error */
vector03: .long _FAULT /* Address Error */
vector04: .long _FAULT /* Illegal Instruction */
diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S
index c12d7a0..8b8708d 100644
--- a/cpu/mcf547x_8x/start.S
+++ b/cpu/mcf547x_8x/start.S
@@ -54,7 +54,7 @@
_vectors:
INITSP: .long 0x00000000 /* Initial SP */
-INITPC: .long _START /* Initial PC */
+INITPC: .long _START /* Initial PC */
vector02: .long _FAULT /* Access Error */
vector03: .long _FAULT /* Address Error */
vector04: .long _FAULT /* Illegal Instruction */
diff --git a/cpu/mips/asc_serial.c b/cpu/mips/asc_serial.c
index d95ec3f..3498b61 100644
--- a/cpu/mips/asc_serial.c
+++ b/cpu/mips/asc_serial.c
@@ -34,10 +34,10 @@
/* Interrupt status register bits */
#define FBS_ISR_AT 0x00000040 /* ASC transmit interrupt */
-#define FBS_ISR_AR 0x00000020 /* ASC receive interrupt */
+#define FBS_ISR_AR 0x00000020 /* ASC receive interrupt */
#define FBS_ISR_AE 0x00000010 /* ASC error interrupt */
#define FBS_ISR_AB 0x00000008 /* ASC transmit buffer interrupt */
-#define FBS_ISR_AS 0x00000004 /* ASC start of autobaud detection interrupt */
+#define FBS_ISR_AS 0x00000004 /* ASC start of autobaud detection interrupt */
#define FBS_ISR_AF 0x00000002 /* ASC end of autobaud detection interrupt */
#else
diff --git a/cpu/mips/au1x00_usb_ohci.h b/cpu/mips/au1x00_usb_ohci.h
index 4ef06ff..a606d45 100644
--- a/cpu/mips/au1x00_usb_ohci.h
+++ b/cpu/mips/au1x00_usb_ohci.h
@@ -11,31 +11,31 @@
static int cc_to_error[16] = {
/* mapping of the OHCI CC status to error codes */
- /* No Error */ 0,
- /* CRC Error */ USB_ST_CRC_ERR,
- /* Bit Stuff */ USB_ST_BIT_ERR,
- /* Data Togg */ USB_ST_CRC_ERR,
- /* Stall */ USB_ST_STALLED,
- /* DevNotResp */ -1,
- /* PIDCheck */ USB_ST_BIT_ERR,
- /* UnExpPID */ USB_ST_BIT_ERR,
- /* DataOver */ USB_ST_BUF_ERR,
- /* DataUnder */ USB_ST_BUF_ERR,
- /* reservd */ -1,
- /* reservd */ -1,
- /* BufferOver */ USB_ST_BUF_ERR,
- /* BuffUnder */ USB_ST_BUF_ERR,
- /* Not Access */ -1,
- /* Not Access */ -1
+ /* No Error */ 0,
+ /* CRC Error */ USB_ST_CRC_ERR,
+ /* Bit Stuff */ USB_ST_BIT_ERR,
+ /* Data Togg */ USB_ST_CRC_ERR,
+ /* Stall */ USB_ST_STALLED,
+ /* DevNotResp */ -1,
+ /* PIDCheck */ USB_ST_BIT_ERR,
+ /* UnExpPID */ USB_ST_BIT_ERR,
+ /* DataOver */ USB_ST_BUF_ERR,
+ /* DataUnder */ USB_ST_BUF_ERR,
+ /* reservd */ -1,
+ /* reservd */ -1,
+ /* BufferOver */ USB_ST_BUF_ERR,
+ /* BuffUnder */ USB_ST_BUF_ERR,
+ /* Not Access */ -1,
+ /* Not Access */ -1
};
/* ED States */
-#define ED_NEW 0x00
-#define ED_UNLINK 0x01
+#define ED_NEW 0x00
+#define ED_UNLINK 0x01
#define ED_OPER 0x02
#define ED_DEL 0x04
-#define ED_URB_DEL 0x08
+#define ED_URB_DEL 0x08
/* usb_ohci_ed */
struct ed {
@@ -61,54 +61,54 @@ typedef struct ed ed_t;
/* TD info field */
-#define TD_CC 0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC 0x0C000000
-#define TD_T 0x03000000
-#define TD_T_DATA0 0x02000000
-#define TD_T_DATA1 0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R 0x00040000
-#define TD_DI 0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP 0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN 0x00100000
-#define TD_DP_OUT 0x00080000
-
-#define TD_ISO 0x00010000
-#define TD_DEL 0x00020000
+#define TD_CC 0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC 0x0C000000
+#define TD_T 0x03000000
+#define TD_T_DATA0 0x02000000
+#define TD_T_DATA1 0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R 0x00040000
+#define TD_DI 0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP 0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN 0x00100000
+#define TD_DP_OUT 0x00080000
+
+#define TD_ISO 0x00010000
+#define TD_DEL 0x00020000
/* CC Codes */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
-#define TD_NOTACCESSED 0x0F
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+#define TD_NOTACCESSED 0x0F
#define MAXPSW 1
struct td {
__u32 hwINFO;
- __u32 hwCBP; /* Current Buffer Pointer */
- __u32 hwNextTD; /* Next TD Pointer */
- __u32 hwBE; /* Memory Buffer End Pointer */
-
- __u16 hwPSW[MAXPSW];
- __u8 unused;
- __u8 index;
- struct ed *ed;
- struct td *next_dl_td;
+ __u32 hwCBP; /* Current Buffer Pointer */
+ __u32 hwNextTD; /* Next TD Pointer */
+ __u32 hwBE; /* Memory Buffer End Pointer */
+
+ __u16 hwPSW[MAXPSW];
+ __u8 unused;
+ __u8 index;
+ struct ed *ed;
+ struct td *next_dl_td;
struct usb_device *usb_dev;
int transfer_len;
__u32 data;
@@ -142,7 +142,7 @@ struct ohci_hcca {
/*
* This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
+ * region. This is Memory Mapped I/O. You must use the readl() and
* writel() macros defined in asm/io.h to access these!!
*/
struct ohci_regs {
@@ -202,10 +202,10 @@ struct ohci_regs {
* HcCommandStatus (cmdstatus) register masks
*/
#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
/*
* masks used with interrupt registers:
@@ -236,101 +236,101 @@ struct virt_root_hub {
/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
#define RH_SET_ADDRESS 0x0500
#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
+#define RH_SET_DESCRIPTOR 0x0700
#define RH_GET_CONFIGURATION 0x0880
#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
+#define RH_SET_EP 0x2000
/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
/* OHCI ROOT HUB REGISTER MASKS */
/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
/* roothub.status bits */
-#define RH_HS_LPS 0x00000001 /* local power status */
-#define RH_HS_OCI 0x00000002 /* over current indicator */
-#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC 0x00010000 /* local power status change */
-#define RH_HS_OCIC 0x00020000 /* over current indicator change */
-#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
/* roothub.b masks */
-#define RH_B_DR 0x0000ffff /* device removable flags */
-#define RH_B_PPCM 0xffff0000 /* port power control mask */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
/* roothub.a masks */
-#define RH_A_NDP (0xff << 0) /* number of downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* over current protection mode */
-#define RH_A_NOCP (1 << 12) /* no over current protection */
-#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
/* urb */
#define N_URB_TD 48
typedef struct
{
ed_t *ed;
- __u16 length; /* number of tds associated with this request */
- __u16 td_cnt; /* number of tds already serviced */
+ __u16 length; /* number of tds associated with this request */
+ __u16 td_cnt; /* number of tds already serviced */
int state;
unsigned long pipe;
int actual_length;
@@ -355,11 +355,11 @@ typedef struct ohci {
int sleeping;
unsigned long flags; /* for HC bugs */
- struct ohci_regs *regs; /* OHCI controller's memory */
+ struct ohci_regs *regs; /* OHCI controller's memory */
- ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
- ed_t *ed_bulktail; /* last endpoint of bulk list */
- ed_t *ed_controltail; /* last endpoint of control list */
+ ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
+ ed_t *ed_bulktail; /* last endpoint of bulk list */
+ ed_t *ed_controltail; /* last endpoint of control list */
int intrstatus;
__u32 hc_control; /* copy of the hc control reg */
struct usb_device *dev[32];
@@ -371,7 +371,7 @@ typedef struct ohci {
#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
struct ohci_device {
- ed_t ed[NUM_EDS];
+ ed_t ed[NUM_EDS];
int ed_cnt;
};
diff --git a/cpu/mips/incaip_wdt.S b/cpu/mips/incaip_wdt.S
index 2ebcc91..329386b 100644
--- a/cpu/mips/incaip_wdt.S
+++ b/cpu/mips/incaip_wdt.S
@@ -51,7 +51,7 @@ disable_incaip_wdt:
and t3, 0xFFFFFF01
or t3, t2
- or t3, 0xF0
+ or t3, 0xF0
sw t3, WD_CON0(t0) /* write password */
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index 947128d..d881879 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -345,7 +345,7 @@ relocate_code:
jr t0
nop
- .word _gp
+ .word _gp
.word _GLOBAL_OFFSET_TABLE_
.word uboot_end_data
.word uboot_end
diff --git a/cpu/mpc512x/start.S b/cpu/mpc512x/start.S
index 5a9d868..fb8acb5 100644
--- a/cpu/mpc512x/start.S
+++ b/cpu/mpc512x/start.S
@@ -219,7 +219,7 @@ boot_cold:
* The SRAM window has a fixed size (256K), so only the start address
* is necessary
*/
- lis r4, START_REG(CFG_SRAM_BASE) & 0xff00
+ lis r4, START_REG(CFG_SRAM_BASE) & 0xff00
stw r4, SRAMBAR(r3)
/*
diff --git a/cpu/mpc5xx/config.mk b/cpu/mpc5xx/config.mk
index 6d66c32..157ddc5 100644
--- a/cpu/mpc5xx/config.mk
+++ b/cpu/mpc5xx/config.mk
@@ -28,7 +28,7 @@
#
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float
diff --git a/cpu/mpc5xx/cpu_init.c b/cpu/mpc5xx/cpu_init.c
index f4cd24b..5bbb798 100644
--- a/cpu/mpc5xx/cpu_init.c
+++ b/cpu/mpc5xx/cpu_init.c
@@ -23,7 +23,7 @@
* File: cpu_init.c
*
* Discription: Contains initialisation functions to setup
- * the cpu properly
+ * the cpu properly
*
*/
@@ -118,6 +118,6 @@ void cpu_init_f (volatile immap_t * immr)
*/
int cpu_init_r (void)
{
- /* Nothing to do at the moment */
+ /* Nothing to do at the moment */
return (0);
}
diff --git a/cpu/mpc5xx/serial.c b/cpu/mpc5xx/serial.c
index ac5556f..39f57a1 100644
--- a/cpu/mpc5xx/serial.c
+++ b/cpu/mpc5xx/serial.c
@@ -24,8 +24,8 @@
* File: serial.c
*
* Discription: Serial interface driver for SCI1 and SCI2.
- * Since this code will be called from ROM use
- * only non-static local variables.
+ * Since this code will be called from ROM use
+ * only non-static local variables.
*
*/
diff --git a/cpu/mpc5xx/speed.c b/cpu/mpc5xx/speed.c
index 6a1fa15..7b7c5b9 100644
--- a/cpu/mpc5xx/speed.c
+++ b/cpu/mpc5xx/speed.c
@@ -49,8 +49,8 @@ int get_clocks (void)
if(immr->im_clkrst.car_plprcr & PLPRCR_CSRC_MSK) {
gd->cpu_clk = vcoout / (2^(((immr->im_clkrst.car_sccr & SCCR_DFNL_MSK) >> SCCR_DFNL_SHIFT) + 1));
} else {
- gd->cpu_clk = vcoout / (2^(immr->im_clkrst.car_sccr & SCCR_DFNH_MSK));
- }
+ gd->cpu_clk = vcoout / (2^(immr->im_clkrst.car_sccr & SCCR_DFNH_MSK));
+ }
#else /* CONFIG_5xx_GCLK_FREQ */
gd->bus_clk = CONFIG_5xx_GCLK_FREQ;
diff --git a/cpu/mpc5xx/spi.c b/cpu/mpc5xx/spi.c
index 81c9ddb..3c187be 100644
--- a/cpu/mpc5xx/spi.c
+++ b/cpu/mpc5xx/spi.c
@@ -208,9 +208,9 @@ void spi_init_f (void)
* Setup RAM
*/
for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
}
return;
}
@@ -238,9 +238,9 @@ ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
immr = (immap_t *) CFG_IMMR;
qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
}
qsmcm->qsmcm_tranram[0] = SPI_EEPROM_WREN; /* write enable */
spi_xfer(1);
@@ -312,9 +312,9 @@ ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
}
i=0;
qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */
diff --git a/cpu/mpc5xx/traps.c b/cpu/mpc5xx/traps.c
index d22b89a..78c820a 100644
--- a/cpu/mpc5xx/traps.c
+++ b/cpu/mpc5xx/traps.c
@@ -223,8 +223,8 @@ void UnknownException(struct pt_regs *regs)
void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
+ show_regs(regs);
#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
+ do_bedbug_breakpoint( regs );
#endif
}
diff --git a/cpu/mpc5xx/u-boot.lds b/cpu/mpc5xx/u-boot.lds
index 386a6e0..7434e3f 100644
--- a/cpu/mpc5xx/u-boot.lds
+++ b/cpu/mpc5xx/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 2aded1a..82640ab 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -884,7 +884,7 @@ int mpc5xxx_fec_initialize(bd_t * bis)
fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec));
dev = (struct eth_device *)malloc(sizeof(*dev));
- memset(dev, 0, sizeof *dev);
+ memset(dev, 0, sizeof *dev);
fec->eth = (ethernet_regs *)MPC5XXX_FEC;
fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
diff --git a/cpu/mpc5xxx/u-boot-customlayout.lds b/cpu/mpc5xxx/u-boot-customlayout.lds
index bbb6cf8..3847860 100644
--- a/cpu/mpc5xxx/u-boot-customlayout.lds
+++ b/cpu/mpc5xxx/u-boot-customlayout.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/cpu/mpc5xxx/u-boot.lds b/cpu/mpc5xxx/u-boot.lds
index db6c6f2..13fffb8 100644
--- a/cpu/mpc5xxx/u-boot.lds
+++ b/cpu/mpc5xxx/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/cpu/mpc8220/u-boot.lds b/cpu/mpc8220/u-boot.lds
index ff4f3dc..e34a9d4 100644
--- a/cpu/mpc8220/u-boot.lds
+++ b/cpu/mpc8220/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/cpu/mpc824x/drivers/epic/epic2.S b/cpu/mpc824x/drivers/epic/epic2.S
index 8cc2fc6..52d19aa 100644
--- a/cpu/mpc824x/drivers/epic/epic2.S
+++ b/cpu/mpc824x/drivers/epic/epic2.S
@@ -169,7 +169,7 @@ epic_exception:
xor r3,r3,r3
xor r4,r4,r4
or r3, r3, r6 /* eumbbar in r3 */
- andi. r4,r7,0x00ff /* Mask off bits, vector in r4 */
+ andi. r4,r7,0x00ff /* Mask off bits, vector in r4 */
stw r4,0x04(r1) /* save the vector value */
diff --git a/cpu/mpc824x/drivers/errors.h b/cpu/mpc824x/drivers/errors.h
index 887f284..20794a2 100644
--- a/cpu/mpc824x/drivers/errors.h
+++ b/cpu/mpc824x/drivers/errors.h
@@ -61,7 +61,7 @@ to standardize the error handling in the current project */
message back to the user.
*/
/*----------------------------------------------------------------------*/
-/* these are specifically for the parser routines */
+/* these are specifically for the parser routines */
#define UNKNOWN_COMMAND 0xfb00 /* "unrecognized command " */
#define UNKNOWN_REGISTER 0xfb01 /* "unknown register "*/
@@ -73,8 +73,8 @@ to standardize the error handling in the current project */
#define UNIMPLEMENTED_STAGE 0xfb05 /* invalid rd or rmm parameter format */
#define REG_NOT_WRITEABLE 0xfb06 /* "unknown operator in arguements"*/
#define INVALID_FILENAME 0xfb07 /* "invalid download filename" */
-#define INVALID_BAUD_RATE 0xfb08 /* invalid baud rate from sb command */
-#define UNSUPPORTED_REGISTER 0xfb09 /* Special register is not supported */
+#define INVALID_BAUD_RATE 0xfb08 /* invalid baud rate from sb command */
+#define UNSUPPORTED_REGISTER 0xfb09 /* Special register is not supported */
#define FOR_BOARD_ONLY 0xfb0a /* "Not available for Unix." */
@@ -140,20 +140,20 @@ to standardize the error handling in the current project */
#define INVALID_FLAG 0xfd0c /* invalid flag */
/*----------------------------------------------------------------------*/
-/* these are for the getarg toolbox */
+/* these are for the getarg toolbox */
-#define INVALID_NUMBER_ARGS 0xFE00 /* invalid number of commd arguements */
+#define INVALID_NUMBER_ARGS 0xFE00 /* invalid number of commd arguements */
#define UNKNOWN_PARAMETER 0xFE01 /* "unknown type of parameter "*/
/*----------------------------------------------------------------------*/
-/* these are for the tokenizer toolbox */
+/* these are for the tokenizer toolbox */
-#define ILLEGAL_CHARACTER 0xFF00 /* unrecognized char. in input stream*/
-#define TTL_NOT_SORTED 0xFF01 /* token translation list not sorted */
-#define TTL_NOT_DEFINED 0xFF02 /* token translation list not assigned*/
-#define INVALID_STRING 0xFF03 /* unable to extract string from input */
-#define BUFFER_EMPTY 0xFF04 /* "input buffer is empty" */
+#define ILLEGAL_CHARACTER 0xFF00 /* unrecognized char. in input stream*/
+#define TTL_NOT_SORTED 0xFF01 /* token translation list not sorted */
+#define TTL_NOT_DEFINED 0xFF02 /* token translation list not assigned*/
+#define INVALID_STRING 0xFF03 /* unable to extract string from input */
+#define BUFFER_EMPTY 0xFF04 /* "input buffer is empty" */
#define INVALID_MODE 0xFF05 /* input buf is in an unrecognized mode*/
#define TOK_INTERNAL_ERROR 0xFF06 /* "internal tokenizer error" */
#define TOO_MANY_IBS 0xFF07 /* "too many open input buffers" */
@@ -172,7 +172,7 @@ to standardize the error handling in the current project */
/* THESE are for the downloader */
-#define NOT_IN_S_RECORD_FORMAT 0xf900 /* "not in S-Record Format" */
+#define NOT_IN_S_RECORD_FORMAT 0xf900 /* "not in S-Record Format" */
#define UNREC_RECORD_TYPE 0xf901 /* "unrecognized record type" */
#define CONVERSION_ERROR 0xf902 /* "ascii to int conversion error" */
#define INVALID_MEMORY 0xf903 /* "bad s-record memory address " */
@@ -190,7 +190,7 @@ to standardize the error handling in the current project */
/* these are for the DUART handling things */
/* "unrecognized serial port configuration" */
-#define UNKNOWN_PORT_STATE 0xf700
+#define UNKNOWN_PORT_STATE 0xf700
/* these are for the register toolbox */
@@ -208,5 +208,5 @@ to standardize the error handling in the current project */
/*----------------------------------------------------------------------*/
-/* these are specifically for the flash routines */
-#define FLASH_ERROR 0xf100 /* general flash error */
+/* these are specifically for the flash routines */
+#define FLASH_ERROR 0xf100 /* general flash error */
diff --git a/cpu/mpc824x/u-boot.lds b/cpu/mpc824x/u-boot.lds
index 1f2e7d7..aa3050d 100644
--- a/cpu/mpc824x/u-boot.lds
+++ b/cpu/mpc824x/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
index 34bd389..c3af7b6 100644
--- a/cpu/mpc8260/i2c.c
+++ b/cpu/mpc8260/i2c.c
@@ -191,10 +191,10 @@ static int i2c_setrate(int hz, int speed)
if ((diff >= 0) && (diff < bestspeed_diff))
{
- bestspeed_diff = diff ;
- bestspeed_modval = modval;
- bestspeed_brgval = brgval;
- bestspeed_filter = filter;
+ bestspeed_diff = diff ;
+ bestspeed_modval = modval;
+ bestspeed_brgval = brgval;
+ bestspeed_filter = filter;
}
}
}
@@ -242,7 +242,7 @@ void i2c_init(int speed, int slaveadd)
/*
* initialise data in dual port ram:
*
- * dpaddr -> parameter ram (64 bytes)
+ * dpaddr -> parameter ram (64 bytes)
* rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes)
* tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes)
* tx buffer (MAX_TX_SPACE bytes)
diff --git a/cpu/mpc8260/speed.h b/cpu/mpc8260/speed.h
index b66393b..3f32a14 100644
--- a/cpu/mpc8260/speed.h
+++ b/cpu/mpc8260/speed.h
@@ -28,10 +28,10 @@
* SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
*
* SPEED_FCOUNT2 timer 2 counting frequency
- * GCLK CPU clock
+ * GCLK CPU clock
* SPEED_TMR2_PS prescaler
*/
-#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
+#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
/*-----------------------------------------------------------------------
* Timer value for PIT
diff --git a/cpu/mpc8260/u-boot.lds b/cpu/mpc8260/u-boot.lds
index 6f500c4..39f2ce9 100644
--- a/cpu/mpc8260/u-boot.lds
+++ b/cpu/mpc8260/u-boot.lds
@@ -33,11 +33,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index fba5b02..fb184d8 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -218,7 +218,7 @@ void cpu_init_f (volatile immap_t * im)
im->sysconf.lblaw[0].bar = CFG_LBLAWBAR0_PRELIM;
im->sysconf.lblaw[0].ar = CFG_LBLAWAR0_PRELIM;
#else
-#error CFG_BR0_PRELIM, CFG_OR0_PRELIM, CFG_LBLAWBAR0_PRELIM & CFG_LBLAWAR0_PRELIM must be defined
+#error CFG_BR0_PRELIM, CFG_OR0_PRELIM, CFG_LBLAWBAR0_PRELIM & CFG_LBLAWAR0_PRELIM must be defined
#endif
#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 70cd410..76f2474 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -510,7 +510,7 @@ long int spd_sdram()
ddr->timing_cfg_1 =
(((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | /* PRETOACT */
((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | /* ACTTOPRE */
- (trcd_clk << 20 ) | /* ACTTORW */
+ (trcd_clk << 20 ) | /* ACTTORW */
(caslat_ctrl << 16 ) | /* CASLAT */
(trfc_low << 12 ) | /* REFEC */
((twr_clk & 0x07) << 8) | /* WRRREC */
diff --git a/cpu/mpc83xx/u-boot.lds b/cpu/mpc83xx/u-boot.lds
index 8da6f14..99ad675 100644
--- a/cpu/mpc83xx/u-boot.lds
+++ b/cpu/mpc83xx/u-boot.lds
@@ -31,11 +31,11 @@ SECTIONS
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c
index 98075bb..21ea38b 100644
--- a/cpu/mpc85xx/qe_io.c
+++ b/cpu/mpc85xx/qe_io.c
@@ -34,7 +34,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
u32 pin_2bit_assign;
u32 pin_1bit_mask;
u32 tmp_val;
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
volatile par_io_t *par_io = (volatile par_io_t *)
&(gur->qe_par_io);
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 15b804d..2b5d90e 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -89,7 +89,7 @@ _start_e500:
/* L1 */
li r0,2
mtspr L1CSR0,r0 /* invalidate d-cache */
- mtspr L1CSR1,r0 /* invalidate i-cache */
+ mtspr L1CSR1,r0 /* invalidate i-cache */
mfspr r1,DBSR
mtspr DBSR,r1 /* Clear all valid bits */
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index 8485841..5cc0c26 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -528,7 +528,7 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
caslat -= 1;
else if (busfreq > max_data_rate) {
printf("DDR: Bus freq %d MHz is not fit for DDR rate %d MHz\n",
- busfreq, max_data_rate);
+ busfreq, max_data_rate);
return 0;
}
}
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index c71c926..c39dc46 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -486,25 +486,25 @@ setup_bats:
.globl early_bats
early_bats:
/* IBAT 5 */
- lis r4, CFG_IBAT5L@h
+ lis r4, CFG_IBAT5L@h
ori r4, r4, CFG_IBAT5L@l
- lis r3, CFG_IBAT5U@h
+ lis r3, CFG_IBAT5U@h
ori r3, r3, CFG_IBAT5U@l
mtspr IBAT5L, r4
mtspr IBAT5U, r3
isync
/* DBAT 5 */
- lis r4, CFG_DBAT5L@h
+ lis r4, CFG_DBAT5L@h
ori r4, r4, CFG_DBAT5L@l
- lis r3, CFG_DBAT5U@h
+ lis r3, CFG_DBAT5U@h
ori r3, r3, CFG_DBAT5U@l
mtspr DBAT5L, r4
mtspr DBAT5U, r3
isync
/* IBAT 6 */
- lis r4, CFG_IBAT6L@h
+ lis r4, CFG_IBAT6L@h
ori r4, r4, CFG_IBAT6L@l
lis r3, CFG_IBAT6U@h
ori r3, r3, CFG_IBAT6U@l
@@ -513,9 +513,9 @@ early_bats:
isync
/* DBAT 6 */
- lis r4, CFG_DBAT6L@h
+ lis r4, CFG_DBAT6L@h
ori r4, r4, CFG_DBAT6L@l
- lis r3, CFG_DBAT6U@h
+ lis r3, CFG_DBAT6U@h
ori r3, r3, CFG_DBAT6U@l
mtspr DBAT6L, r4
mtspr DBAT6U, r3
diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c
index 6c59374..f05b666 100644
--- a/cpu/mpc8xx/i2c.c
+++ b/cpu/mpc8xx/i2c.c
@@ -590,7 +590,7 @@ i2c_test_callback(int flags, int xnum)
int i2c_probe(uchar chip)
{
i2c_state_t state;
- int rc;
+ int rc;
uchar buf[1];
i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
diff --git a/cpu/mpc8xx/scc.c b/cpu/mpc8xx/scc.c
index 744dcdd..09a3db1 100644
--- a/cpu/mpc8xx/scc.c
+++ b/cpu/mpc8xx/scc.c
@@ -1,7 +1,7 @@
/*
* File: scc.c
* Description:
- * Basic ET HW initialization and packet RX/TX routines
+ * Basic ET HW initialization and packet RX/TX routines
*
* NOTE <<<IMPORTANT: PLEASE READ>>>:
* Do not cache Rx/Tx buffers!
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
index 918de67..8bf8e46 100644
--- a/cpu/mpc8xx/video.c
+++ b/cpu/mpc8xx/video.c
@@ -115,9 +115,9 @@ DECLARE_GLOBAL_DATA_PTR;
#define VIDEO_BURST_LEN (VIDEO_COLS/8)
#ifdef VIDEO_MODE_YUYV
-#define VIDEO_BG_COL 0x80D880D8 /* Background color in YUYV format */
+#define VIDEO_BG_COL 0x80D880D8 /* Background color in YUYV format */
#else
-#define VIDEO_BG_COL 0xF8F8F8F8 /* Background color in RGB format */
+#define VIDEO_BG_COL 0xF8F8F8F8 /* Background color in RGB format */
#endif
/************************************************************************/
diff --git a/cpu/nios/asmi.c b/cpu/nios/asmi.c
index ce2863e..c2cd8fe 100644
--- a/cpu/nios/asmi.c
+++ b/cpu/nios/asmi.c
@@ -183,7 +183,7 @@ static void asmi_status_wr (unsigned char status)
* Device information
***********************************************************************/
typedef struct asmi_devinfo_t {
- const char *name; /* Device name */
+ const char *name; /* Device name */
unsigned char id; /* Device silicon id */
unsigned char size; /* Total size log2(bytes)*/
unsigned char num_sects; /* Number of sectors */
diff --git a/cpu/nios/start.S b/cpu/nios/start.S
index cb1af3c..9e73941 100644
--- a/cpu/nios/start.S
+++ b/cpu/nios/start.S
@@ -208,7 +208,7 @@ __start:
* A control register that counts system clock cycles would be
* a handy feature -- hint for Altera ;-)
*/
- .globl dly_clks
+ .globl dly_clks
/* Each loop is 4 instructions as delay slot is always
* executed. Each instruction is approximately 4 clocks
* (according to some lame info from Altera). So ...
diff --git a/cpu/nios2/start.S b/cpu/nios2/start.S
index 4c6e470..6c6f294 100644
--- a/cpu/nios2/start.S
+++ b/cpu/nios2/start.S
@@ -178,20 +178,20 @@ _reloc:
* Instruction performance varies based on the core. For cores
* with icache and static/dynamic branch prediction (II/f, II/s):
*
- * Normal ALU (e.g. add, cmp, etc): 1 cycle
- * Branch (correctly predicted, taken): 2 cycles
+ * Normal ALU (e.g. add, cmp, etc): 1 cycle
+ * Branch (correctly predicted, taken): 2 cycles
* Negative offset is predicted (II/s).
*
* For cores without icache and no branch prediction (II/e):
*
- * Normal ALU (e.g. add, cmp, etc): 6 cycles
- * Branch (no prediction): 6 cycles
+ * Normal ALU (e.g. add, cmp, etc): 6 cycles
+ * Branch (no prediction): 6 cycles
*
* For simplicity, if an instruction cache is implemented we
* assume II/f or II/s. Otherwise, we use the II/e.
*
*/
- .globl dly_clks
+ .globl dly_clks
dly_clks:
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index 941d4dc..c28c7ac 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -46,7 +46,7 @@
* 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB
* 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not
* really required after a reset since PMMxMAs are already
- * disabled but is a good practice nonetheless. JWB
+ * disabled but is a good practice nonetheless. JWB
* 12-Jun-01 stefan.roese@esd-electronics.com
* - PCI host/adapter handling reworked
* 09-Jul-01 stefan.roese@esd-electronics.com
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index f9a1988..503facc 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -444,8 +444,8 @@ static void ppc4xx_setup_utl(u32 port)
/*
* TODO: double check PCI express SDR based on the latest user manual
- * Some registers specified here no longer exist.. has to be
- * updated based on the final EAS spec.
+ * Some registers specified here no longer exist.. has to be
+ * updated based on the final EAS spec.
*/
static int check_error(void)
{
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index 47c264e..d8be2ce 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -61,7 +61,7 @@ static void _i2c_bus_reset(void)
/* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
out_8((u8 *)IIC_EXTSTS, 0x8F);
- /* Place chip in the reset state */
+ /* Place chip in the reset state */
out_8((u8 *)IIC_XTCNTLSS, IIC_XTCNTLSS_SRST);
/* Check if bus is free */
diff --git a/cpu/ppc4xx/kgdb.S b/cpu/ppc4xx/kgdb.S
index 42b9546..4227a4c 100644
--- a/cpu/ppc4xx/kgdb.S
+++ b/cpu/ppc4xx/kgdb.S
@@ -45,7 +45,7 @@ kgdb_flush_cache_all:
iccci r0,r0 /* iccci invalidates the entire I cache */
/* dcache */
addi r6,0,0x0000 /* clear GPR 6 */
- addi r7,r0, 128 /* do loop for # of dcache lines */
+ addi r7,r0, 128 /* do loop for # of dcache lines */
/* NOTE: dccci invalidates both */
mtctr r7 /* ways in the D cache */
..dcloop:
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 8b4e64a..ef47ffc 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -1126,7 +1126,7 @@ void get_sys_info (sys_info_t * sysInfo)
m = sysInfo->pllFwdDiv * plb2xDiv * 2
* sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
break;
- case PLL_FBK_PLL_LOCAL:
+ case PLL_FBK_PLL_LOCAL:
break;
default:
printf("%s unknown m\n", __FUNCTION__);
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index a513b45..0008170 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -852,7 +852,7 @@ _start:
mtdccr r1 /* data cache */
addis r1,r0,CFG_INIT_RAM_ADDR@h
- ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */
+ ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
@@ -947,11 +947,11 @@ _start:
/*----------------------------------------------------------------------- */
/* DMA Status, clear to come up clean */
/*----------------------------------------------------------------------- */
- addis r3,r0, 0xFFFF /* Clear all existing DMA status */
+ addis r3,r0, 0xFFFF /* Clear all existing DMA status */
ori r3,r3, 0xFFFF
mtdcr dmasr, r3
- bl ppc405ep_init /* do ppc405ep specific init */
+ bl ppc405ep_init /* do ppc405ep specific init */
#endif /* CONFIG_405EP */
#if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
@@ -1809,13 +1809,13 @@ ppc405ep_init:
!-----------------------------------------------------------------------
*/
mfdcr r5, CPC0_PLLMR1
- rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
+ rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
cmpi cr0,0,r4,0x1
- beq pll_done /* if SSCS =b'1' then PLL has */
- /* already been set */
- /* and CPU has been reset */
- /* so skip to next section */
+ beq pll_done /* if SSCS =b'1' then PLL has */
+ /* already been set */
+ /* and CPU has been reset */
+ /* so skip to next section */
#ifdef CONFIG_BUBINGA
/*
@@ -1837,13 +1837,13 @@ ppc405ep_init:
lwz r4, 0(r3)
addis r5,0,NVRVFY1@h
addi r5,r5,NVRVFY1@l
- cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
+ cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
bne ..no_pllset
addi r3,r3,4
lwz r4, 0(r3)
addis r5,0,NVRVFY2@h
addi r5,r5,NVRVFY2@l
- cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
+ cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
bne ..no_pllset
addi r3,r3,8 /* Skip over conf_size */
lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
@@ -1867,7 +1867,7 @@ ppc405ep_init:
#if defined(CONFIG_ZEUS)
mfdcr r4, CPC0_BOOT
andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
+ bne strap_1 /* serial eeprom present */
lis r3,0x0000
addi r3,r3,0x3030
lis r4,0x8042
@@ -1879,10 +1879,10 @@ strap_1:
b 1f
#endif
- addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
- ori r3,r3,PLLMR0_DEFAULT@l /* */
- addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
- ori r4,r4,PLLMR1_DEFAULT@l /* */
+ addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
+ ori r3,r3,PLLMR0_DEFAULT@l /* */
+ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
+ ori r4,r4,PLLMR1_DEFAULT@l /* */
#ifdef CONFIG_TAIHU
b 1f
@@ -1898,7 +1898,7 @@ strap_1:
#endif /* CONFIG_TAIHU */
1:
- b pll_write /* Write the CPC0_PLLMR with new value */
+ b pll_write /* Write the CPC0_PLLMR with new value */
pll_done:
/*
@@ -1915,7 +1915,7 @@ pll_done:
pci_wait:
bdnz pci_wait
- blr /* return to main code */
+ blr /* return to main code */
/*
!-----------------------------------------------------------------------------
@@ -1936,20 +1936,20 @@ pci_wait:
pll_write:
mfdcr r5, CPC0_UCR
andis. r5,r5,0xFFFF
- ori r5,r5,0x0101 /* Stop the UART clocks */
- mtdcr CPC0_UCR,r5 /* Before changing PLL */
+ ori r5,r5,0x0101 /* Stop the UART clocks */
+ mtdcr CPC0_UCR,r5 /* Before changing PLL */
mfdcr r5, CPC0_PLLMR1
- rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
+ rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
mtdcr CPC0_PLLMR1,r5
- oris r5,r5,0x4000 /* Set PLL Reset */
+ oris r5,r5,0x4000 /* Set PLL Reset */
mtdcr CPC0_PLLMR1,r5
- mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
- rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
- rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
+ mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
+ rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
+ oris r5,r5,0x4000 /* Set PLL Reset */
+ mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
+ rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
mtdcr CPC0_PLLMR1,r5
/*
@@ -1970,9 +1970,9 @@ pll_wait:
* Not sure if this is needed...
*/
addis r3,0,0x1000
- mtspr dbcr0,r3 /* This will cause a CPU core reset, and */
- /* execution will continue from the poweron */
- /* vector of 0xfffffffc */
+ mtspr dbcr0,r3 /* This will cause a CPU core reset, and */
+ /* execution will continue from the poweron */
+ /* vector of 0xfffffffc */
#endif /* CONFIG_405EP */
#if defined(CONFIG_440)
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index 7dbb288..5dbd842 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -1600,7 +1600,7 @@ int usb_lowlevel_init(void)
gohci.sleeping = 0;
gohci.irq = -1;
#if defined(CONFIG_440EP)
- gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+ gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
#elif defined(CONFIG_440EPX) || defined(CFG_USB_HOST)
gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
#endif
diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
index 92dd19f..df537c4 100644
--- a/cpu/pxa/i2c.c
+++ b/cpu/pxa/i2c.c
@@ -45,7 +45,7 @@
#include <asm/arch/pxa-regs.h>
#include <i2c.h>
-/*#define DEBUG_I2C 1 /###* activate local debugging output */
+/*#define DEBUG_I2C 1 /###* activate local debugging output */
#define I2C_PXA_SLAVE_ADDR 0x1 /* slave pxa unit address */
#if (CFG_I2C_SPEED == 400000)
@@ -191,8 +191,8 @@ int i2c_transfer(struct i2c_msg *msg)
/* start receive */
ICR &= ~ICR_START;
ICR &= ~ICR_STOP;
- if (msg->condition == I2C_COND_START) ICR |= ICR_START;
- if (msg->condition == I2C_COND_STOP) ICR |= ICR_STOP;
+ if (msg->condition == I2C_COND_START) ICR |= ICR_START;
+ if (msg->condition == I2C_COND_STOP) ICR |= ICR_STOP;
if (msg->acknack == I2C_ACKNAK_SENDNAK) ICR |= ICR_ACKNAK;
if (msg->acknack == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
ICR &= ~ICR_ALDIE;
@@ -267,7 +267,7 @@ void i2c_init(int speed, int slaveaddr)
* i2c_probe: - Test if a chip answers for a given i2c address
*
* @chip: address of the chip which is searched for
- * @return: 0 if a chip was found, -1 otherwhise
+ * @return: 0 if a chip was found, -1 otherwhise
*/
int i2c_probe(uchar chip)
diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S
index 7affe87..1d88c1c 100644
--- a/cpu/s3c44b0/start.S
+++ b/cpu/s3c44b0/start.S
@@ -188,7 +188,7 @@ _start_armboot: .word start_armboot
#define WTCON (0x01c00000+0x130000)
cpu_init_crit:
/* disable watch dog */
- ldr r0, =WTCON
+ ldr r0, =WTCON
ldr r1, =0x0
str r1, [r0]
@@ -211,7 +211,7 @@ cpu_init_crit:
ldr r1, =PLLCON
#if CONFIG_S3C44B0_CLOCK_SPEED==66
- ldr r0, =0x34031 /* 66MHz (Quartz=11MHz) */
+ ldr r0, =0x34031 /* 66MHz (Quartz=11MHz) */
#elif CONFIG_S3C44B0_CLOCK_SPEED==75
ldr r0, =0x610c1 /*B2: Xtal=20mhz Fclk=75MHz */
#else
diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S
index 431ee65..910650d 100644
--- a/cpu/sa1100/start.S
+++ b/cpu/sa1100/start.S
@@ -157,7 +157,7 @@ stack_setup:
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
@@ -349,31 +349,31 @@ cpu_init_crit:
undefined_instruction:
get_bad_stack
bad_save_user_regs
- bl do_undefined_instruction
+ bl do_undefined_instruction
.align 5
software_interrupt:
get_bad_stack
bad_save_user_regs
- bl do_software_interrupt
+ bl do_software_interrupt
.align 5
prefetch_abort:
get_bad_stack
bad_save_user_regs
- bl do_prefetch_abort
+ bl do_prefetch_abort
.align 5
data_abort:
get_bad_stack
bad_save_user_regs
- bl do_data_abort
+ bl do_data_abort
.align 5
not_used:
get_bad_stack
bad_save_user_regs
- bl do_not_used
+ bl do_not_used
#ifdef CONFIG_USE_IRQ
@@ -381,7 +381,7 @@ not_used:
irq:
get_irq_stack
irq_save_user_regs
- bl do_irq
+ bl do_irq
irq_restore_user_regs
.align 5
@@ -389,7 +389,7 @@ fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
- bl do_fiq
+ bl do_fiq
irq_restore_user_regs
#else
@@ -398,13 +398,13 @@ fiq:
irq:
get_bad_stack
bad_save_user_regs
- bl do_irq
+ bl do_irq
.align 5
fiq:
get_bad_stack
bad_save_user_regs
- bl do_fiq
+ bl do_fiq
#endif
diff --git a/cpu/sh4/cache.c b/cpu/sh4/cache.c
index 4e744d7..377005c 100644
--- a/cpu/sh4/cache.c
+++ b/cpu/sh4/cache.c
@@ -72,9 +72,9 @@ static inline void cache_wback_all(void)
jump_to_P2();
for (i = 0; i < CACHE_OC_NUM_ENTRIES; i++){
for (j = 0; j < CACHE_OC_NUM_WAYS; j++) {
- addr = CACHE_OC_ADDRESS_ARRAY | (j << CACHE_OC_WAY_SHIFT)
+ addr = CACHE_OC_ADDRESS_ARRAY | (j << CACHE_OC_WAY_SHIFT)
| (i << CACHE_OC_ENTRY_SHIFT);
- data = inl(addr);
+ data = inl(addr);
if (data & CACHE_UPDATED) {
data &= ~CACHE_UPDATED;
outl(data, addr);
diff --git a/disk/part_iso.c b/disk/part_iso.c
index 4894630..72ff868 100644
--- a/disk/part_iso.c
+++ b/disk/part_iso.c
@@ -81,7 +81,7 @@ int get_partition_info_iso_verb(block_dev_desc_t * dev_desc, int part_num, disk_
/* the first sector (sector 0x10) must be a primary volume desc */
blkaddr=PVD_OFFSET;
if (dev_desc->block_read (dev_desc->dev, PVD_OFFSET, 1, (ulong *) tmpbuf) != 1)
- return (-1);
+ return (-1);
if(ppr->desctype!=0x01) {
if(verb)
printf ("** First descriptor is NOT a primary desc on %d:%d **\n",
@@ -103,7 +103,7 @@ int get_partition_info_iso_verb(block_dev_desc_t * dev_desc, int part_num, disk_
for(i=blkaddr;i<lastsect;i++) {
PRINTF("Reading block %d\n", i);
if (dev_desc->block_read (dev_desc->dev, i, 1, (ulong *) tmpbuf) != 1)
- return (-1);
+ return (-1);
if(ppr->desctype==0x00)
break; /* boot entry found */
if(ppr->desctype==0xff) {
@@ -113,7 +113,7 @@ int get_partition_info_iso_verb(block_dev_desc_t * dev_desc, int part_num, disk_
return (-1);
}
}
- /* boot entry found */
+ /* boot entry found */
if(strncmp(pbr->ident_str,"EL TORITO SPECIFICATION",23)!=0) {
if(verb)
printf ("** Wrong El Torito ident: %s on %d:%d **\n",
diff --git a/disk/part_iso.h b/disk/part_iso.h
index 2663578..c139d4b 100644
--- a/disk/part_iso.h
+++ b/disk/part_iso.h
@@ -41,8 +41,8 @@ typedef struct iso_pri_rec {
unsigned char desctype; /* type of Volume descriptor: 0 = boot record, 1 = primary, 2 = Supplement, 3 = volume part 0xff trminator */
unsigned char stand_ident[5]; /* "CD001" */
unsigned char vers; /* Version */
- unsigned char unused;
- char sysid[32]; /* system Identifier */
+ unsigned char unused;
+ char sysid[32]; /* system Identifier */
char volid[32]; /* volume Identifier */
unsigned char zeros1[8]; /* unused */
unsigned long volsiz_LE; /* volume size Little Endian */
@@ -57,69 +57,69 @@ typedef struct iso_pri_rec {
unsigned long pathtablen_LE;/* Path Table size LE */
unsigned long pathtablen_BE;/* Path Table size BE */
unsigned long firstsek_LEpathtab1_LE; /* location of first occurrence of little endian type path table */
- unsigned long firstsek_LEpathtab2_LE; /* location of optional occurrence of little endian type path table */
- unsigned long firstsek_BEpathtab1_BE; /* location of first occurrence of big endian type path table */
- unsigned long firstsek_BEpathtab2_BE; /* location of optional occurrence of big endian type path table */
- unsigned char rootdir[34]; /* directory record for root dir */
- char volsetid[128];/* Volume set identifier */
- char pubid[128]; /* Publisher identifier */
- char dataprepid[128]; /* data preparer identifier */
- char appid[128]; /* application identifier */
- char copyr[37]; /* copyright string */
- char abstractfileid[37]; /* abstract file identifier */
- char bibliofileid[37]; /* bibliographic file identifier */
- unsigned char creationdate[17]; /* creation date */
- unsigned char modify[17]; /* modification date */
- unsigned char expire[17]; /* expiring date */
- unsigned char effective[17];/* effective date */
- unsigned char filestruc_ver; /* file structur version */
+ unsigned long firstsek_LEpathtab2_LE; /* location of optional occurrence of little endian type path table */
+ unsigned long firstsek_BEpathtab1_BE; /* location of first occurrence of big endian type path table */
+ unsigned long firstsek_BEpathtab2_BE; /* location of optional occurrence of big endian type path table */
+ unsigned char rootdir[34]; /* directory record for root dir */
+ char volsetid[128];/* Volume set identifier */
+ char pubid[128]; /* Publisher identifier */
+ char dataprepid[128]; /* data preparer identifier */
+ char appid[128]; /* application identifier */
+ char copyr[37]; /* copyright string */
+ char abstractfileid[37]; /* abstract file identifier */
+ char bibliofileid[37]; /* bibliographic file identifier */
+ unsigned char creationdate[17]; /* creation date */
+ unsigned char modify[17]; /* modification date */
+ unsigned char expire[17]; /* expiring date */
+ unsigned char effective[17];/* effective date */
+ unsigned char filestruc_ver; /* file structur version */
} iso_pri_rec_t;
typedef struct iso_sup_rec {
unsigned char desctype; /* type of Volume descriptor: 0 = boot record, 1 = primary, 2 = Supplement, 3 = volume part 0xff trminator */
unsigned char stand_ident[5]; /* "CD001" */
unsigned char vers; /* Version */
- unsigned char volumeflags; /* if bit 0 = 0 => all escape sequences are according ISO 2375 */
- char sysid[32]; /* system Identifier */
+ unsigned char volumeflags; /* if bit 0 = 0 => all escape sequences are according ISO 2375 */
+ char sysid[32]; /* system Identifier */
char volid[32]; /* volume Identifier */
unsigned char zeros1[8]; /* unused */
- unsigned long volsiz_LE; /* volume size Little Endian */
- unsigned long volsiz_BE; /* volume size Big Endian */
- unsigned char escapeseq[32];/* Escape sequences */
+ unsigned long volsiz_LE; /* volume size Little Endian */
+ unsigned long volsiz_BE; /* volume size Big Endian */
+ unsigned char escapeseq[32];/* Escape sequences */
unsigned short setsize_LE; /* volume set size LE */
- unsigned short setsize_BE; /* volume set size BE */
- unsigned short seqnum_LE; /* volume sequence number LE */
- unsigned short seqnum_BE; /* volume sequence number BE */
- unsigned short secsize_LE; /* sector size LE */
- unsigned short secsize_BE; /* sector size BE */
+ unsigned short setsize_BE; /* volume set size BE */
+ unsigned short seqnum_LE; /* volume sequence number LE */
+ unsigned short seqnum_BE; /* volume sequence number BE */
+ unsigned short secsize_LE; /* sector size LE */
+ unsigned short secsize_BE; /* sector size BE */
unsigned long pathtablen_LE;/* Path Table size LE */
unsigned long pathtablen_BE;/* Path Table size BE */
unsigned long firstsek_LEpathtab1_LE; /* location of first occurrence of little endian type path table */
- unsigned long firstsek_LEpathtab2_LE; /* location of optional occurrence of little endian type path table */
- unsigned long firstsek_BEpathtab1_BE; /* location of first occurrence of big endian type path table */
- unsigned long firstsek_BEpathtab2_BE; /* location of optional occurrence of big endian type path table */
- unsigned char rootdir[34]; /* directory record for root dir */
- char volsetid[128];/* Volume set identifier */
- char pubid[128]; /* Publisher identifier */
- char dataprepid[128]; /* data preparer identifier */
- char appid[128]; /* application identifier */
- char copyr[37]; /* copyright string */
- char abstractfileid[37]; /* abstract file identifier */
- char bibliofileid[37]; /* bibliographic file identifier */
- unsigned char creationdate[17]; /* creation date */
- unsigned char modify[17]; /* modification date */
- unsigned char expire[17]; /* expiring date */
- unsigned char effective[17];/* effective date */
- unsigned char filestruc_ver; /* file structur version */
+ unsigned long firstsek_LEpathtab2_LE; /* location of optional occurrence of little endian type path table */
+ unsigned long firstsek_BEpathtab1_BE; /* location of first occurrence of big endian type path table */
+ unsigned long firstsek_BEpathtab2_BE; /* location of optional occurrence of big endian type path table */
+ unsigned char rootdir[34]; /* directory record for root dir */
+ char volsetid[128];/* Volume set identifier */
+ char pubid[128]; /* Publisher identifier */
+ char dataprepid[128]; /* data preparer identifier */
+ char appid[128]; /* application identifier */
+ char copyr[37]; /* copyright string */
+ char abstractfileid[37]; /* abstract file identifier */
+ char bibliofileid[37]; /* bibliographic file identifier */
+ unsigned char creationdate[17]; /* creation date */
+ unsigned char modify[17]; /* modification date */
+ unsigned char expire[17]; /* expiring date */
+ unsigned char effective[17];/* effective date */
+ unsigned char filestruc_ver; /* file structur version */
}iso_sup_rec_t;
typedef struct iso_part_rec {
unsigned char desctype; /* type of Volume descriptor: 0 = boot record, 1 = primary, 2 = Supplement, 3 = volume part 0xff trminator */
unsigned char stand_ident[5]; /* "CD001" */
unsigned char vers; /* Version */
- unsigned char unused;
- char sysid[32]; /* system Identifier */
- char volid[32]; /* volume partition Identifier */
+ unsigned char unused;
+ char sysid[32]; /* system Identifier */
+ char volid[32]; /* volume partition Identifier */
unsigned long partloc_LE; /* volume partition location LE */
unsigned long partloc_BE; /* volume partition location BE */
unsigned long partsiz_LE; /* volume partition size LE */
@@ -131,8 +131,8 @@ typedef struct iso_val_entry {
unsigned char header_id; /* Header ID must be 0x01 */
unsigned char platform; /* Platform: 0=x86, 1=PowerPC, 2=MAC */
unsigned char res[2]; /* reserved */
- char manu_str[0x18]; /* Ident String of manufacturer/developer */
- unsigned char chk_sum[2]; /* Check sum (all words must be zero) */
+ char manu_str[0x18]; /* Ident String of manufacturer/developer */
+ unsigned char chk_sum[2]; /* Check sum (all words must be zero) */
unsigned char key[2]; /* key[0]=55, key[1]=0xAA */
} iso_val_entry_t;
@@ -140,7 +140,7 @@ typedef struct iso_header_entry {
unsigned char header_id; /* Header ID must be 0x90 or 0x91 */
unsigned char platform; /* Platform: 0=x86, 1=PowerPC, 2=MAC */
unsigned char numentry[2]; /* number of entries */
- char id_str[0x1C]; /* Ident String of sectionr */
+ char id_str[0x1C]; /* Ident String of sectionr */
} iso_header_entry_t;
@@ -148,7 +148,7 @@ typedef struct iso_init_def_entry {
unsigned char boot_ind; /* Boot indicator 0x88=bootable 0=not bootable */
unsigned char boot_media; /* boot Media Type: 0=no Emulation, 1=1.2MB floppy, 2=1.44MB floppy, 3=2.88MB floppy 4=hd (0x80) */
unsigned char ld_seg[2]; /* Load segment (flat model=addr/10) */
- unsigned char systype; /* System Type copy of byte5 of part table */
+ unsigned char systype; /* System Type copy of byte5 of part table */
unsigned char res; /* reserved */
unsigned char sec_cnt[2]; /* sector count in VIRTUAL Blocks (0x200) */
unsigned char rel_block_addr[4]; /* relative Block address */
diff --git a/doc/README-i386 b/doc/README-i386
index 02b753c..c560d22 100644
--- a/doc/README-i386
+++ b/doc/README-i386
@@ -57,9 +57,9 @@ Daniel Engström, Omicron Ceti AB, daniel@omicron.se
--- linux-2.4.19-orig/init/do_mounts.c Sat Aug 3 02:39:46 2002
+++ linux-2.4.19/init/do_mounts.c Mon Sep 23 16:21:33 2002
@@ -224,6 +224,14 @@
- { "ftlc", 0x2c10 },
- { "ftld", 0x2c18 },
- { "mtdblock", 0x1f00 },
+ { "ftlc", 0x2c10 },
+ { "ftld", 0x2c18 },
+ { "mtdblock", 0x1f00 },
+ { "mtdblock0", 0x1f00 },
+ { "mtdblock1", 0x1f01 },
+ { "mtdblock2", 0x1f02 },
@@ -68,7 +68,7 @@ Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ { "mtdblock5", 0x1f05 },
+ { "mtdblock6", 0x1f06 },
+ { "mtdblock7", 0x1f07 },
- { NULL, 0 }
+ { NULL, 0 }
};
-------------------
diff --git a/doc/README-integrator b/doc/README-integrator
index ce8a9d2..4daf341 100644
--- a/doc/README-integrator
+++ b/doc/README-integrator
@@ -86,12 +86,12 @@ using the generic "arm_intcm" core:
ap966_config Integrator Core Module for ARM966E-S TM
ap922_config Integrator Core Module for ARM922T TM with ETM
ap922_XA10_config Integrator Core Module for ARM922T using Altera Excalibur
-ap7_config ** CM7TDMI
+ap7_config ** CM7TDMI
integratorap_config
ap_config
-cp966_config Integrator Core Module for ARM966E-S TM
+cp966_config Integrator Core Module for ARM966E-S TM
cp922_config Integrator Core Module for ARM922T TM with ETM
cp922_XA10_config Integrator Core Module for ARM922T using Altera Excalibur
cp1026_config Integrator Core Module ARM1026EJ-S TM
diff --git a/doc/README.RPXlite b/doc/README.RPXlite
index c8ccc41..c0238ae 100644
--- a/doc/README.RPXlite
+++ b/doc/README.RPXlite
@@ -451,7 +451,7 @@ reg_config.txt:
PS = 00
PARE = 0
WP = 0
- MS = 1 /* UPMA */
+ MS = 1 /* UPMA */
V = 1 /* Valid */
=> 0x0000 0081
@@ -486,7 +486,7 @@ reg_config.txt:
PS = 00
PARE = 0
WP = 0
- MS = 0 /* GPCM */
+ MS = 0 /* GPCM */
V = 1 /* Valid */
=> 0xFA40 0001
@@ -513,7 +513,7 @@ reg_config.txt:
PS = 01
PARE = 0
WP = 0
- MS = 0 /* GPCM */
+ MS = 0 /* GPCM */
V = 1 /* Valid */
=> 0xFA00 0401
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1
index ded5321..5257f18 100644
--- a/doc/README.adnpesc1
+++ b/doc/README.adnpesc1
@@ -184,7 +184,7 @@ you have to check-up the next environment variables:
- default is '0' (zero)
NOTE: You should avoid to save this variable with non zero
- value to Flash. Otherwise it would be allow any
+ value to Flash. Otherwise it would be allow any
update process at any time!
2. appl_entry_addr
diff --git a/doc/README.adnpesc1_base32 b/doc/README.adnpesc1_base32
index 6576044..145e8cd 100644
--- a/doc/README.adnpesc1_base32
+++ b/doc/README.adnpesc1_base32
@@ -192,7 +192,7 @@ IDE: (TODO)
: gap :
| |
0x00010020 ---32-----------16|15------------0-
- | | \
+ | | \
| register bank | |
| size = (real_size << 1) | |
| real_size = 0x10 | |
@@ -308,7 +308,7 @@ IDE: (TODO)
+ 0x18 |- - - - - - - - - - - - - - - -| |
| slaveselect (1 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
- SPI0 | (reserved) | |
+ SPI0 | (reserved) | |
[4] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| control (11 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
diff --git a/doc/README.console b/doc/README.console
index 6d477df..25c4f1d 100644
--- a/doc/README.console
+++ b/doc/README.console
@@ -97,8 +97,8 @@ SUPPORTED DRIVERS
Working drivers:
- serial (architecture dependent serial stuff)
- video (mpc8xx video controller)
+ serial (architecture dependent serial stuff)
+ video (mpc8xx video controller)
Work in progress:
@@ -114,5 +114,5 @@ TESTED CONFIGURATIONS
The driver has been tested with the following configurations (see
CREDITS for other contact informations):
-- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it
+- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it
- GENIETV with AD7177 on a PAL TV (YCbYCr) - arsenio@tin.it
diff --git a/doc/README.m54455evb b/doc/README.m54455evb
index 119a19d..5c01f0d 100644
--- a/doc/README.m54455evb
+++ b/doc/README.m54455evb
@@ -83,7 +83,7 @@ CONFIG_CMD_DATE -- enable to use date feature in u-boot
CONFIG_MCFFEC -- define to use common CF FEC driver
CONFIG_NET_MULTI -- define to use multi FEC in u-boot
CONFIG_MII -- enable to use MII driver
-CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
+CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
CFG_DISCOVER_PHY -- enable PHY discovery
CFG_RX_ETH_BUFFER -- Set FEC Receive buffer
CFG_FAULT_ECHO_LINK_DOWN--
@@ -107,7 +107,7 @@ CFG_ATA_IDE0_OFFSET -- define ATA IDE0 offset
CFG_ATA_DATA_OFFSET -- define ATA data IO
CFG_ATA_REG_OFFSET -- define for normal register accesses
CFG_ATA_ALT_OFFSET -- define for alternate registers
-CFG_ATA_STRIDE -- define for Interval between registers
+CFG_ATA_STRIDE -- define for Interval between registers
_IO_BASE -- define for IO base address
CONFIG_MCFTMR -- define to use DMA timer
diff --git a/doc/README.m68k b/doc/README.m68k
index 6dea2b5..0c533f3 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -4,9 +4,9 @@ U-Boot for Motorola M68K
====================================================================
History
-August 08,2005; Jens Scharsig <esw@bus-elektronik.de>
+August 08,2005; Jens Scharsig <esw@bus-elektronik.de>
MCF5282 implementation without preloader
-January 12, 2004; <josef.baumgartner@telex.de>
+January 12, 2004; <josef.baumgartner@telex.de>
====================================================================
This file contains status information for the port of U-Boot to the
@@ -82,8 +82,8 @@ Board specific code is located in: board/bus/EB+MCF-EV123
To configure the board, type:
-make EB+MCF-EV123_config for external FLASH
-make EB+MCF-EV123_internal_config for internal FLASH
+make EB+MCF-EV123_config for external FLASH
+make EB+MCF-EV123_internal_config for internal FLASH
4. CONFIGURATION OPTIONS/SETTINGS
@@ -149,7 +149,7 @@ CFG_RFD -- defines the PLL Reduce Frecuency Devider
CFG_CSx_BASE -- defines the base address of chip select x
CFG_CSx_SIZE -- defines the memory size (address range) of chip select x
CFG_CSx_WIDTH -- defines the bus with of chip select x
-CFG_CSx_RO -- if set to 0 chip select x is read/wirte
+CFG_CSx_RO -- if set to 0 chip select x is read/wirte
else chipselct is read only
CFG_CSx_WS -- defines the number of wait states of chip select x
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
index 3ed5cd3..6099da2 100644
--- a/doc/README.marubun-pcmcia
+++ b/doc/README.marubun-pcmcia
@@ -19,7 +19,7 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
1. base source code
The code is based on sources from the Linux kernel
- ( arch/sh/kernel/cf-enabler.c ).
+ ( arch/sh/kernel/cf-enabler.c ).
2. How to use
The options you have to specify in the config file are (with the
@@ -27,14 +27,14 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
* CONFIG_MARUBUN_PCCARD
If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
- ex. #define CONFIG_MARUBUN_PCCARD
+ ex. #define CONFIG_MARUBUN_PCCARD
* CONFIG_PCMCIA_SLOT_A
- Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
+ Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
ex. #define CONFIG_PCMCIA_SLOT_A 1
* CFG_MARUBUN_MRSHPC
- This is MR-SHPC-01 PCMCIA controler base address.
+ This is MR-SHPC-01 PCMCIA controler base address.
You should do the setting matched to your environment.
ex. #define CFG_MARUBUN_MRSHPC 0xb03fffe0
( for MS7722SE01 environment )
diff --git a/doc/README.mpc8313erdb b/doc/README.mpc8313erdb
index 21580f9..cd56689 100644
--- a/doc/README.mpc8313erdb
+++ b/doc/README.mpc8313erdb
@@ -22,7 +22,7 @@ Freescale MPC8313ERDB Board
0x8000_0000 0x8fff_ffff PCI MEM 256M
0x9000_0000 0x9fff_ffff PCI_MMIO 256M
0xe000_0000 0xe00f_ffff IMMR 1M
- 0xe200_0000 0xe20f_ffff PCI IO 16M
+ 0xe200_0000 0xe20f_ffff PCI IO 16M
0xe280_0000 0xe280_7fff NAND FLASH (CS1) 32K
0xf000_0000 0xf001_ffff VSC7385 (CS2) 128K
0xfa00_0000 0xfa00_7fff Board Status/ 32K
diff --git a/doc/README.mpc8349itx b/doc/README.mpc8349itx
index 4ae03ae..7f24623 100644
--- a/doc/README.mpc8349itx
+++ b/doc/README.mpc8349itx
@@ -17,7 +17,7 @@ Freescale MPC8349E-mITX and MPC8349E-mITX-GP Boards
2. Board Switches and Jumpers
-2.0 Descriptions for all of the board jumpers can be found in the User
+2.0 Descriptions for all of the board jumpers can be found in the User
Guide. Of particular interest to U-Boot developers is jumper J22:
Pos. Name Default Description
@@ -88,8 +88,8 @@ Freescale MPC8349E-mITX and MPC8349E-mITX-GP Boards
include/configs/MPC8349ITX.h
- CONFIG_MPC83XX MPC83xx family
- CONFIG_MPC8349 MPC8349 specific
+ CONFIG_MPC83XX MPC83xx family
+ CONFIG_MPC8349 MPC8349 specific
CONFIG_MPC8349ITX MPC8349E-mITX
CONFIG_MPC8349ITXGP MPC8349E-mITX-GP
diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds
index 5f20247..7c841ce 100644
--- a/doc/README.mpc8360emds
+++ b/doc/README.mpc8360emds
@@ -1,7 +1,7 @@
Freescale MPC8360EMDS Board
-----------------------------------------
1. Board Switches and Jumpers
-1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
+1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
For some reason, the HW designers describe the switch settings
in terms of 0 and 1, and then map that to physical switches where
the label "On" refers to logic 0 and "Off" is logic 1.
diff --git a/doc/README.mpc837xemds b/doc/README.mpc837xemds
index 7823595..a14da0f 100644
--- a/doc/README.mpc837xemds
+++ b/doc/README.mpc837xemds
@@ -1,7 +1,7 @@
Freescale MPC837xEMDS Board
-----------------------------------------
1. Board Switches and Jumpers
-1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board
+1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board
For some reason, the HW designers describe the switch settings
in terms of 0 and 1, and then map that to physical switches where
the label "On" refers to logic 0 and "Off" is logic 1.
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
index ac56cca..1c41d77 100644
--- a/doc/README.mpc8641hpcn
+++ b/doc/README.mpc8641hpcn
@@ -55,7 +55,7 @@ Switches:
halves (virtual banks)
0 :: normal
SW5(3) = 0 CFG_FLASHWP = 0 :: not protected
- SW5(4) = 0 CFG_PORTDIV = 1 :: 2:1 for PD4
+ SW5(4) = 0 CFG_PORTDIV = 1 :: 2:1 for PD4
1:1 for PD6
SW5(5-6) = 11 CFG_PIXISOPT = 11 :: s/w determined
SW5(7-8) = 11 CFG_LADOPT = 11 :: s/w determined
diff --git a/doc/README.video b/doc/README.video
index c145d9b..34e199c 100644
--- a/doc/README.video
+++ b/doc/README.video
@@ -26,5 +26,5 @@ U-Boot MPC8xx video controller driver
The driver has been tested with the following configurations:
-- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it
+- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it
- GENIETV with AD7177 on a PAL TV (YCbYCr) - arsenio@tin.it
diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c
index 70e9ce1..d41511c 100644
--- a/drivers/bios_emulator/bios.c
+++ b/drivers/bios_emulator/bios.c
@@ -36,8 +36,8 @@
*
* Description: Module implementing the BIOS specific functions.
*
-* Jason ported this file to u-boot to run the ATI video card
-* video BIOS.
+* Jason ported this file to u-boot to run the ATI video card
+* video BIOS.
*
****************************************************************************/
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index dca3547..5f1298d 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libblock.a
+LIB := $(obj)libblock.a
COBJS-y += ahci.o
COBJS-y += ata_piix.o
@@ -34,8 +34,8 @@ COBJS-y += sym53c8xx.o
COBJS-y += systemace.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c
index 29eeccd..87b63b7 100644
--- a/drivers/block/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
@@ -83,11 +83,11 @@ static unsigned int len_script_reselection;
#endif
-static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */
+static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */
static unsigned char script_int_mask; /* shadow register for SCRIPT related interrupts */
-static unsigned long script_select[8]; /* script for selection */
-static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */
-static unsigned long script_msgin[14]; /* script for message in phase */
+static unsigned long script_select[8]; /* script for selection */
+static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */
+static unsigned long script_msgin[14]; /* script for message in phase */
static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */
static unsigned long script_cmd[18]; /* script for command phase */
static unsigned long script_data_in[8]; /* script for data in phase */
@@ -119,63 +119,146 @@ void handle_scsi_int(void);
/********************************************************************************
* reports SCSI errors to the user
*/
-void scsi_print_error(ccb *pccb)
+void scsi_print_error (ccb * pccb)
{
int i;
- printf("SCSI Error: Target %d LUN %d Command %02X\n",pccb->target, pccb->lun, pccb->cmd[0]);
- printf(" CCB: ");
- for(i=0;i<pccb->cmdlen;i++)
- printf("%02X ",pccb->cmd[i]);
- printf("(len=%d)\n",pccb->cmdlen);
- printf(" Cntrl: ");
- switch(pccb->contr_stat) {
- case SIR_COMPLETE: printf("Complete (no Error)\n"); break;
- case SIR_SEL_ATN_NO_MSG_OUT: printf("Selected with ATN no MSG out phase\n"); break;
- case SIR_CMD_OUT_ILL_PH: printf("Command out illegal phase\n"); break;
- case SIR_MSG_RECEIVED: printf("MSG received Error\n"); break;
- case SIR_DATA_IN_ERR: printf("Data in Error\n"); break;
- case SIR_DATA_OUT_ERR: printf("Data out Error\n"); break;
- case SIR_SCRIPT_ERROR: printf("Script Error\n"); break;
- case SIR_MSG_OUT_NO_CMD: printf("MSG out no Command phase\n"); break;
- case SIR_MSG_OVER7: printf("MSG in over 7 bytes\n"); break;
- case INT_ON_FY: printf("Interrupt on fly\n"); break;
- case SCSI_SEL_TIME_OUT: printf("SCSI Selection Timeout\n"); break;
- case SCSI_HNS_TIME_OUT: printf("SCSI Handshake Timeout\n"); break;
- case SCSI_MA_TIME_OUT: printf("SCSI Phase Error\n"); break;
- case SCSI_UNEXP_DIS: printf("SCSI unexpected disconnect\n"); break;
- default: printf("unknown status %lx\n",pccb->contr_stat); break;
+
+ printf ("SCSI Error: Target %d LUN %d Command %02X\n", pccb->target,
+ pccb->lun, pccb->cmd[0]);
+ printf (" CCB: ");
+ for (i = 0; i < pccb->cmdlen; i++)
+ printf ("%02X ", pccb->cmd[i]);
+ printf ("(len=%d)\n", pccb->cmdlen);
+ printf (" Cntrl: ");
+ switch (pccb->contr_stat) {
+ case SIR_COMPLETE:
+ printf ("Complete (no Error)\n");
+ break;
+ case SIR_SEL_ATN_NO_MSG_OUT:
+ printf ("Selected with ATN no MSG out phase\n");
+ break;
+ case SIR_CMD_OUT_ILL_PH:
+ printf ("Command out illegal phase\n");
+ break;
+ case SIR_MSG_RECEIVED:
+ printf ("MSG received Error\n");
+ break;
+ case SIR_DATA_IN_ERR:
+ printf ("Data in Error\n");
+ break;
+ case SIR_DATA_OUT_ERR:
+ printf ("Data out Error\n");
+ break;
+ case SIR_SCRIPT_ERROR:
+ printf ("Script Error\n");
+ break;
+ case SIR_MSG_OUT_NO_CMD:
+ printf ("MSG out no Command phase\n");
+ break;
+ case SIR_MSG_OVER7:
+ printf ("MSG in over 7 bytes\n");
+ break;
+ case INT_ON_FY:
+ printf ("Interrupt on fly\n");
+ break;
+ case SCSI_SEL_TIME_OUT:
+ printf ("SCSI Selection Timeout\n");
+ break;
+ case SCSI_HNS_TIME_OUT:
+ printf ("SCSI Handshake Timeout\n");
+ break;
+ case SCSI_MA_TIME_OUT:
+ printf ("SCSI Phase Error\n");
+ break;
+ case SCSI_UNEXP_DIS:
+ printf ("SCSI unexpected disconnect\n");
+ break;
+ default:
+ printf ("unknown status %lx\n", pccb->contr_stat);
+ break;
}
- printf(" Sense: SK %x (",pccb->sense_buf[2]&0x0f);
- switch(pccb->sense_buf[2]&0xf) {
- case SENSE_NO_SENSE: printf("No Sense)"); break;
- case SENSE_RECOVERED_ERROR: printf("Recovered Error)"); break;
- case SENSE_NOT_READY: printf("Not Ready)"); break;
- case SENSE_MEDIUM_ERROR: printf("Medium Error)"); break;
- case SENSE_HARDWARE_ERROR: printf("Hardware Error)"); break;
- case SENSE_ILLEGAL_REQUEST: printf("Illegal request)"); break;
- case SENSE_UNIT_ATTENTION: printf("Unit Attention)"); break;
- case SENSE_DATA_PROTECT: printf("Data Protect)"); break;
- case SENSE_BLANK_CHECK: printf("Blank check)"); break;
- case SENSE_VENDOR_SPECIFIC: printf("Vendor specific)"); break;
- case SENSE_COPY_ABORTED: printf("Copy aborted)"); break;
- case SENSE_ABORTED_COMMAND: printf("Aborted Command)"); break;
- case SENSE_VOLUME_OVERFLOW: printf("Volume overflow)"); break;
- case SENSE_MISCOMPARE: printf("Misscompare\n"); break;
- default: printf("Illegal Sensecode\n"); break;
+ printf (" Sense: SK %x (", pccb->sense_buf[2] & 0x0f);
+ switch (pccb->sense_buf[2] & 0xf) {
+ case SENSE_NO_SENSE:
+ printf ("No Sense)");
+ break;
+ case SENSE_RECOVERED_ERROR:
+ printf ("Recovered Error)");
+ break;
+ case SENSE_NOT_READY:
+ printf ("Not Ready)");
+ break;
+ case SENSE_MEDIUM_ERROR:
+ printf ("Medium Error)");
+ break;
+ case SENSE_HARDWARE_ERROR:
+ printf ("Hardware Error)");
+ break;
+ case SENSE_ILLEGAL_REQUEST:
+ printf ("Illegal request)");
+ break;
+ case SENSE_UNIT_ATTENTION:
+ printf ("Unit Attention)");
+ break;
+ case SENSE_DATA_PROTECT:
+ printf ("Data Protect)");
+ break;
+ case SENSE_BLANK_CHECK:
+ printf ("Blank check)");
+ break;
+ case SENSE_VENDOR_SPECIFIC:
+ printf ("Vendor specific)");
+ break;
+ case SENSE_COPY_ABORTED:
+ printf ("Copy aborted)");
+ break;
+ case SENSE_ABORTED_COMMAND:
+ printf ("Aborted Command)");
+ break;
+ case SENSE_VOLUME_OVERFLOW:
+ printf ("Volume overflow)");
+ break;
+ case SENSE_MISCOMPARE:
+ printf ("Misscompare\n");
+ break;
+ default:
+ printf ("Illegal Sensecode\n");
+ break;
}
- printf(" ASC %x ASCQ %x\n",pccb->sense_buf[12],pccb->sense_buf[13]);
- printf(" Status: ");
- switch(pccb->status) {
- case S_GOOD : printf("Good\n"); break;
- case S_CHECK_COND: printf("Check condition\n"); break;
- case S_COND_MET: printf("Condition Met\n"); break;
- case S_BUSY: printf("Busy\n"); break;
- case S_INT: printf("Intermediate\n"); break;
- case S_INT_COND_MET: printf("Intermediate condition met\n"); break;
- case S_CONFLICT: printf("Reservation conflict\n"); break;
- case S_TERMINATED: printf("Command terminated\n"); break;
- case S_QUEUE_FULL: printf("Task set full\n"); break;
- default: printf("unknown: %02X\n",pccb->status); break;
+ printf (" ASC %x ASCQ %x\n", pccb->sense_buf[12],
+ pccb->sense_buf[13]);
+ printf (" Status: ");
+ switch (pccb->status) {
+ case S_GOOD:
+ printf ("Good\n");
+ break;
+ case S_CHECK_COND:
+ printf ("Check condition\n");
+ break;
+ case S_COND_MET:
+ printf ("Condition Met\n");
+ break;
+ case S_BUSY:
+ printf ("Busy\n");
+ break;
+ case S_INT:
+ printf ("Intermediate\n");
+ break;
+ case S_INT_COND_MET:
+ printf ("Intermediate condition met\n");
+ break;
+ case S_CONFLICT:
+ printf ("Reservation conflict\n");
+ break;
+ case S_TERMINATED:
+ printf ("Command terminated\n");
+ break;
+ case S_QUEUE_FULL:
+ printf ("Task set full\n");
+ break;
+ default:
+ printf ("unknown: %02X\n", pccb->status);
+ break;
}
}
@@ -252,8 +335,7 @@ void handle_scsi_int(void)
if((stat & DIP)==DIP) { /* DMA Interrupt pending */
stat1=scsi_read_byte(DSTAT);
#ifdef SCSI_SINGLE_STEP
- if((stat1 & SSI)==SSI)
- {
+ if((stat1 & SSI)==SSI) {
tt=in32r(scsi_mem_addr+DSP);
if(((tt)>=start_script_select) && ((tt)<start_script_select+len_script_select)) {
printf("select %d\n",(tt-start_script_select)>>2);
@@ -589,7 +671,7 @@ void scsi_issue(ccb *pccb)
int busdevfunc = pccb->priv;
int i;
unsigned short sstat;
- int retrycnt; /* retry counter */
+ int retrycnt; /* retry counter */
for(i=0;i<3;i++)
int_stat[i]=0; /* delete all int status */
/* struct pccb must be set-up correctly */
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 2dd5a0e..7e17360 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -23,13 +23,13 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libdma.a
+LIB := $(obj)libdma.a
COBJS-y += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 071ef00..534c015 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libi2c.a
+LIB := $(obj)libi2c.a
COBJS-y += fsl_i2c.o
COBJS-y += omap1510_i2c.o
@@ -32,8 +32,8 @@ COBJS-y += tsi108_i2c.o
COBJS-y += mxc_i2c.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index df22cf9..2933cb6 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -23,15 +23,15 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libinput.a
+LIB := $(obj)libinput.a
COBJS-y += i8042.o
COBJS-y += keyboard.o
COBJS-y += pc_keyb.o ps2ser.o ps2mult.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/input/keyboard.c b/drivers/input/keyboard.c
index 9975202..54182a7 100644
--- a/drivers/input/keyboard.c
+++ b/drivers/input/keyboard.c
@@ -270,20 +270,20 @@ extern int overwrite_console (void);
int kbd_init (void)
{
int error;
- device_t kbddev ;
+ device_t kbddev ;
char *stdinname = getenv ("stdin");
if(kbd_init_hw()==-1)
return -1;
- memset (&kbddev, 0, sizeof(kbddev));
- strcpy(kbddev.name, DEVNAME);
- kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
- kbddev.putc = NULL ;
+ memset (&kbddev, 0, sizeof(kbddev));
+ strcpy(kbddev.name, DEVNAME);
+ kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+ kbddev.putc = NULL ;
kbddev.puts = NULL ;
kbddev.getc = kbd_getc ;
kbddev.tstc = kbd_testc ;
- error = device_register (&kbddev);
+ error = device_register (&kbddev);
if(error==0) {
/* check if this is the standard input device */
if(strcmp(stdinname,DEVNAME)==0) {
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 67521720..fe8d3d8 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libmisc.a
+LIB := $(obj)libmisc.a
COBJS-y += ali512x.o
COBJS-y += ns87308.o
@@ -31,8 +31,8 @@ COBJS-y += status_led.o
COBJS-$(CONFIG_FSL_LAW) += fsl_law.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/misc/ali512x.c b/drivers/misc/ali512x.c
index 7b7edc0..90b45d9 100644
--- a/drivers/misc/ali512x.c
+++ b/drivers/misc/ali512x.c
@@ -262,7 +262,7 @@ void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
* SIO reigster 3 (CIO Address Selection) bit definitions:
* bit 7 CIO index and data registers enabled
* bit 1-0 CIO indirect registers port address select
- * 0 index = 0xE0 data = 0xE1
+ * 0 index = 0xE0 data = 0xE1
* 1 index = 0xE2 data = 0xE3
* 2 index = 0xE4 data = 0xE5
* 3 index = 0xEA data = 0xEB
diff --git a/drivers/mtd/at45.c b/drivers/mtd/at45.c
index dac987a..a9d13ff 100644
--- a/drivers/mtd/at45.c
+++ b/drivers/mtd/at45.c
@@ -140,8 +140,8 @@ AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc
}
/*--------------------------------------------------------------------------*/
-/* Function Name : AT91F_DataFlashContinuousRead */
-/* Object : Continuous stream Read */
+/* Function Name : AT91F_DataFlashContinuousRead */
+/* Object : Continuous stream Read */
/* Input Parameters : DataFlash Service */
/* : <src> = dataflash address */
/* : <*dataBuffer> = data buffer pointer */
@@ -205,7 +205,7 @@ AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(AT91PS_DataFlash pDataFlash,
/* Object : Read a page in the SRAM Buffer 1 or 2 */
/* Input Parameters : DataFlash Service */
/* : Page concerned */
-/* : */
+/* : */
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
@@ -303,10 +303,10 @@ AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer(
/*---------------------------------------------------------------------------*/
/* Function Name : AT91F_PageErase */
-/* Object : Erase a page */
+/* Object : Erase a page */
/* Input Parameters : DataFlash Service */
/* : Page concerned */
-/* : */
+/* : */
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
AT91S_DataFlashStatus AT91F_PageErase(
@@ -328,10 +328,10 @@ AT91S_DataFlashStatus AT91F_PageErase(
/*---------------------------------------------------------------------------*/
/* Function Name : AT91F_BlockErase */
-/* Object : Erase a Block */
+/* Object : Erase a Block */
/* Input Parameters : DataFlash Service */
/* : Page concerned */
-/* : */
+/* : */
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
AT91S_DataFlashStatus AT91F_BlockErase(
@@ -510,10 +510,10 @@ AT91S_DataFlashStatus AT91F_DataFlashWrite(AT91PS_DataFlash pDataFlash,
}
/*---------------------------------------------------------------------------*/
-/* Function Name : AT91F_DataFlashRead */
+/* Function Name : AT91F_DataFlashRead */
/* Object : Read a block in dataflash */
-/* Input Parameters : */
-/* Return value : */
+/* Input Parameters : */
+/* Return value : */
/*---------------------------------------------------------------------------*/
int AT91F_DataFlashRead(AT91PS_DataFlash pDataFlash,
unsigned long addr, unsigned long size, char *buffer)
@@ -548,9 +548,9 @@ int AT91F_DataFlashRead(AT91PS_DataFlash pDataFlash,
}
/*---------------------------------------------------------------------------*/
-/* Function Name : AT91F_DataflashProbe */
-/* Object : */
-/* Input Parameters : */
+/* Function Name : AT91F_DataflashProbe */
+/* Object : */
+/* Input Parameters : */
/* Return value : Dataflash status register */
/*---------------------------------------------------------------------------*/
int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 244fa09..7bd22a0 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libnand.a
+LIB := $(obj)libnand.a
COBJS-y += nand.o
COBJS-y += nand_base.o
@@ -35,8 +35,8 @@ COBJS-y += nand_util.o
COBJS-y += fsl_upm.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e17af70..fdd85c1 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -187,7 +187,7 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
/* Calc s[i] = s[i] / alpha^(v + i) */
for (i = 0; i < NROOTS; i++) {
if (syn[i])
- syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
+ syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
}
/* Call the decoder library */
nerr = decode_rs16(rs, NULL, NULL, 1019, syn, 0, errpos, 0, errval);
@@ -357,7 +357,7 @@ static void doc2000_readbuf(struct mtd_info *mtd,
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
- int i;
+ int i;
if (debug)printk("readbuf of %d bytes: ", len);
@@ -372,7 +372,7 @@ static void doc2000_readbuf_dword(struct mtd_info *mtd,
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
- int i;
+ int i;
if (debug) printk("readbuf_dword of %d bytes: ", len);
@@ -1710,7 +1710,7 @@ fail:
static void release_nanddoc(void)
{
- struct mtd_info *mtd, *nextmtd;
+ struct mtd_info *mtd, *nextmtd;
struct nand_chip *nand;
struct doc_priv *doc;
@@ -1739,7 +1739,7 @@ static int __init init_nanddoc(void)
* generator polinomial degree = 4
*/
rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS);
- if (!rs_decoder) {
+ if (!rs_decoder) {
printk (KERN_ERR "DiskOnChip: Could not create a RS decoder\n");
return -ENOMEM;
}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 2da1d46..5aef31c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -10,7 +10,7 @@
* http://www.linux-mtd.infradead.org/tech/nand.html
*
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- * 2002 Thomas Gleixner (tglx@linutronix.de)
+ * 2002 Thomas Gleixner (tglx@linutronix.de)
*
* 02-08-2004 tglx: support for strange chips, which cannot auto increment
* pages on read / read_oob
@@ -838,7 +838,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
unsigned long timeo;
if (state == FL_ERASING)
- timeo = (CFG_HZ * 400) / 1000;
+ timeo = (CFG_HZ * 400) / 1000;
else
timeo = (CFG_HZ * 20) / 1000;
@@ -876,7 +876,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
* nand_write_page - [GENERIC] write one page
* @mtd: MTD device structure
* @this: NAND chip structure
- * @page: startpage inside the chip, must be called with (page & this->pagemask)
+ * @page: startpage inside the chip, must be called with (page & this->pagemask)
* @oob_buf: out of band data buffer
* @oobsel: out of band selecttion structre
* @cached: 1 = enable cached programming if supported by chip
@@ -890,10 +890,10 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page,
u_char *oob_buf, struct nand_oobinfo *oobsel, int cached)
{
- int i, status;
+ int i, status;
u_char ecc_code[32];
int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
- uint *oob_config = oobsel->eccpos;
+ uint *oob_config = oobsel->eccpos;
int datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
int eccbytes = 0;
@@ -970,7 +970,7 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
* nand_verify_pages - [GENERIC] verify the chip contents after a write
* @mtd: MTD device structure
* @this: NAND chip structure
- * @page: startpage inside the chip, must be called with (page & this->pagemask)
+ * @page: startpage inside the chip, must be called with (page & this->pagemask)
* @numpages: number of pages to verify
* @oob_buf: out of band data buffer
* @oobsel: out of band selecttion structre
@@ -988,10 +988,10 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode)
{
- int i, j, datidx = 0, oobofs = 0, res = -EIO;
+ int i, j, datidx = 0, oobofs = 0, res = -EIO;
int eccsteps = this->eccsteps;
int hweccbytes;
- u_char oobdata[64];
+ u_char oobdata[64];
hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0;
@@ -1035,7 +1035,7 @@ static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int
int idx = oobsel->eccpos[i];
if (oobdata[idx] != oob_buf[oobofs + idx] ) {
DEBUG (MTD_DEBUG_LEVEL0,
- "%s: Failed ECC write "
+ "%s: Failed ECC write "
"verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
goto out;
}
@@ -1739,7 +1739,7 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
/* Verify the remaining pages */
cmp:
this->data_poi = bufstart;
- ret = nand_verify_pages (mtd, this, startpage, totalpages,
+ ret = nand_verify_pages (mtd, this, startpage, totalpages,
oobbuf, oobsel, chipnr, (eccbuf != NULL));
if (!ret)
*retlen = written;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 19a9bc2..eff76d7 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -34,9 +34,9 @@
* number which indicates which of both tables is more up to date.
*
* The table uses 2 bits per block
- * 11b: block is good
- * 00b: block is factory marked bad
- * 01b, 10b: block is marked bad due to wear
+ * 11b: block is good
+ * 00b: block is factory marked bad
+ * 01b, 10b: block is marked bad due to wear
*
* The memory bad block table uses the following scheme:
* 00b: block is good
@@ -739,7 +739,7 @@ static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
for (i = 0; i < chips; i++) {
if ((td->options & NAND_BBT_ABSPAGE) ||
!(td->options & NAND_BBT_WRITE)) {
- if (td->pages[i] == -1) continue;
+ if (td->pages[i] == -1) continue;
block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
block <<= 1;
oldval = this->bbt[(block >> 3)];
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 524b6b1..7363490 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -23,82 +23,82 @@
* Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
* options
*
-* Pagesize; 0, 256, 512
-* 0 get this information from the extended chip ID
+* Pagesize; 0, 256, 512
+* 0 get this information from the extended chip ID
+ 256 256 Byte page size
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
/* These are the new chips with large page size. The pagesize
* and the erasesize is determined from the extended id bytes
*/
/* 1 Gigabit */
- {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
/* 2 Gigabit */
- {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
/* 4 Gigabit */
- {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
/* 8 Gigabit */
- {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
/* 16 Gigabit */
- {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
- {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
- {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+ {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+ {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
/* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout !
* The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
diff --git a/drivers/mtd/nand_legacy/Makefile b/drivers/mtd/nand_legacy/Makefile
index 95314d8..4e29c36 100644
--- a/drivers/mtd/nand_legacy/Makefile
+++ b/drivers/mtd/nand_legacy/Makefile
@@ -23,12 +23,12 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libnand_legacy.a
+LIB := $(obj)libnand_legacy.a
-COBJS := nand_legacy.o
+COBJS := nand_legacy.o
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/mtd/nand_legacy/nand_legacy.c b/drivers/mtd/nand_legacy/nand_legacy.c
index 49d2ebb..fafefad 100644
--- a/drivers/mtd/nand_legacy/nand_legacy.c
+++ b/drivers/mtd/nand_legacy/nand_legacy.c
@@ -438,7 +438,7 @@ static int NanD_IdentChip(struct nand_chip *nand, int floor, int chip)
nand->erasesize = nand_flash_ids[i].erasesize;
nand->chips_name = nand_flash_ids[i].name;
nand->bus16 = nand_flash_ids[i].bus16;
- return 1;
+ return 1;
}
return 0;
}
@@ -638,10 +638,10 @@ static int nand_read_ecc(struct nand_chip *nand, size_t start, size_t len,
/* Send the read command */
NanD_Command(nand, NAND_CMD_READ0);
if (nand->bus16) {
- NanD_Address(nand, ADDR_COLUMN_PAGE,
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
(page << nand->page_shift) + (col >> 1));
} else {
- NanD_Address(nand, ADDR_COLUMN_PAGE,
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
(page << nand->page_shift) + col);
}
@@ -989,7 +989,7 @@ static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
NAND_WP_OFF();
#endif
- NAND_ENABLE_CE(nand); /* set pin low */
+ NAND_ENABLE_CE(nand); /* set pin low */
/* Check the WP bit */
NanD_Command(nand, NAND_CMD_STATUS);
@@ -1037,7 +1037,7 @@ out:
/* De-select the NAND device */
NAND_DISABLE_CE(nand); /* set pin high */
#ifdef CONFIG_OMAP1510
- archflashwp(0,1);
+ archflashwp(0,1);
#endif
#ifdef CFG_NAND_WP
NAND_WP_ON();
@@ -1070,9 +1070,9 @@ int nand_read_oob(struct nand_chip* nand, size_t ofs, size_t len,
NAND_ENABLE_CE(nand); /* set pin low */
NanD_Command(nand, NAND_CMD_READOOB);
if (nand->bus16) {
- NanD_Address(nand, ADDR_COLUMN_PAGE,
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
((ofs >> nand->page_shift) << nand->page_shift) +
- ((ofs & (nand->oobblock - 1)) >> 1));
+ ((ofs & (nand->oobblock - 1)) >> 1));
} else {
NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
}
@@ -1126,11 +1126,11 @@ int nand_write_oob(struct nand_chip* nand, size_t ofs, size_t len,
/* issue the Read2 command to set the pointer to the Spare Data Area. */
NanD_Command(nand, NAND_CMD_READOOB);
if (nand->bus16) {
- NanD_Address(nand, ADDR_COLUMN_PAGE,
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
((ofs >> nand->page_shift) << nand->page_shift) +
- ((ofs & (nand->oobblock - 1)) >> 1));
+ ((ofs & (nand->oobblock - 1)) >> 1));
} else {
- NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
}
/* update address for 2M x 8bit devices. OOB starts on the second */
@@ -1145,11 +1145,11 @@ int nand_write_oob(struct nand_chip* nand, size_t ofs, size_t len,
/* issue the Serial Data In command to initial the Page Program process */
NanD_Command(nand, NAND_CMD_SEQIN);
if (nand->bus16) {
- NanD_Address(nand, ADDR_COLUMN_PAGE,
+ NanD_Address(nand, ADDR_COLUMN_PAGE,
((ofs >> nand->page_shift) << nand->page_shift) +
- ((ofs & (nand->oobblock - 1)) >> 1));
+ ((ofs & (nand->oobblock - 1)) >> 1));
} else {
- NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+ NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
}
/* treat crossing 8-byte OOB data for 2M x 8bit devices */
@@ -1163,7 +1163,7 @@ int nand_write_oob(struct nand_chip* nand, size_t ofs, size_t len,
NanD_Command(nand, NAND_CMD_PAGEPROG);
NanD_Command(nand, NAND_CMD_STATUS);
#ifdef NAND_NO_RB
- { u_char ret_val;
+ { u_char ret_val;
do {
ret_val = READ_NAND(nandptr); /* wait till ready */
} while ((ret_val & 0x40) != 0x40);
@@ -1322,7 +1322,7 @@ out:
/* De-select the NAND device */
NAND_DISABLE_CE(nand); /* set pin high */
#ifdef CONFIG_OMAP1510
- archflashwp(0,1);
+ archflashwp(0,1);
#endif
#ifdef CFG_NAND_WP
NAND_WP_ON();
diff --git a/drivers/net/3c589.c b/drivers/net/3c589.c
index 080b686..3f1e770 100644
--- a/drivers/net/3c589.c
+++ b/drivers/net/3c589.c
@@ -99,7 +99,7 @@ typedef unsigned long int dword;
})
#define insw(args...) mmio_insw(args)
-#define mmio_insw(r,b,l) ({ int __i ; \
+#define mmio_insw(r,b,l) ({ int __i ; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
@@ -154,8 +154,8 @@ enum RxFilter {
/* Register window 1 offsets, the window used in normal operation. */
#define TX_FIFO 0x00
#define RX_FIFO 0x00
-#define RX_STATUS 0x08
-#define TX_STATUS 0x0B
+#define RX_STATUS 0x08
+#define TX_STATUS 0x0B
#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */
diff --git a/drivers/net/3c589.h b/drivers/net/3c589.h
index 6735bf9..8f8cf5b 100644
--- a/drivers/net/3c589.h
+++ b/drivers/net/3c589.h
@@ -64,7 +64,7 @@
/*
* some macros to acces long named fields
*/
-#define BASE (EL_BASE_ADDR)
+#define BASE (EL_BASE_ADDR)
/*
* Commands to read/write EEPROM trough EEPROM command register (Window 0,
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4131aad..5b031c9 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libnet.a
+LIB := $(obj)libnet.a
COBJS-y += 3c589.o
COBJS-y += bcm570x.o bcm570x_autoneg.o 5701rls.o
@@ -68,8 +68,8 @@ COBJS-$(CONFIG_XILINX_EMAC) += xilinx_emac.o
COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/net/bcm570x.c b/drivers/net/bcm570x.c
index c8f4064..5ad31d1 100644
--- a/drivers/net/bcm570x.c
+++ b/drivers/net/bcm570x.c
@@ -27,7 +27,7 @@
/*
* PCI memory base for Ethernet device as well as device Interrupt.
*/
-#define BCM570X_MBAR 0x80100000
+#define BCM570X_MBAR 0x80100000
#define BCM570X_ILINE 1
#define SECOND_USEC 1000000
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index afe122a..fe56949 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -35,7 +35,7 @@
#define TXBUF_BASE_ADDR 0xFF800000
#define TX_BUF_CNT 1
-#define TOUT_LOOP 1000000
+#define TOUT_LOOP 1000000
ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT];
ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX];
diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
index 7238922..1d728d8 100644
--- a/drivers/net/dc2114x.c
+++ b/drivers/net/dc2114x.c
@@ -212,14 +212,14 @@ static struct pci_device_id supported[] = {
int dc21x4x_initialize(bd_t *bis)
{
- int idx=0;
- int card_number = 0;
- unsigned int cfrv;
- unsigned char timer;
+ int idx=0;
+ int card_number = 0;
+ unsigned int cfrv;
+ unsigned char timer;
pci_dev_t devbusfn;
unsigned int iobase;
unsigned short status;
- struct eth_device* dev;
+ struct eth_device* dev;
while(1) {
devbusfn = pci_find_devices(supported, idx++);
@@ -490,7 +490,7 @@ static void send_setup_frame(struct eth_device* dev, bd_t *bis)
{
int i;
char setup_frame[SETUP_FRAME_LEN];
- char *pa = &setup_frame[0];
+ char *pa = &setup_frame[0];
memset(pa, 0xff, SETUP_FRAME_LEN);
@@ -738,22 +738,22 @@ static void update_srom(struct eth_device *dev, bd_t *bis)
{
int i;
static unsigned short eeprom[0x40] = {
- 0x140b, 0x6610, 0x0000, 0x0000, /* 00 */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 04 */
- 0x00a3, 0x0103, 0x0000, 0x0000, /* 08 */
- 0x0000, 0x1f00, 0x0000, 0x0000, /* 0c */
- 0x0108, 0x038d, 0x0000, 0x0000, /* 10 */
- 0xe078, 0x0001, 0x0040, 0x0018, /* 14 */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 18 */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 1c */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 20 */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 24 */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 28 */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 2c */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 34 */
- 0x0000, 0x0000, 0x0000, 0x0000, /* 38 */
- 0x0000, 0x0000, 0x0000, 0x4e07, /* 3c */
+ 0x140b, 0x6610, 0x0000, 0x0000, /* 00 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 04 */
+ 0x00a3, 0x0103, 0x0000, 0x0000, /* 08 */
+ 0x0000, 0x1f00, 0x0000, 0x0000, /* 0c */
+ 0x0108, 0x038d, 0x0000, 0x0000, /* 10 */
+ 0xe078, 0x0001, 0x0040, 0x0018, /* 14 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 18 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 1c */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 20 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 24 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 28 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 2c */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 34 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 38 */
+ 0x0000, 0x0000, 0x0000, 0x4e07, /* 3c */
};
/* Ethernet Addr... */
@@ -761,8 +761,7 @@ static void update_srom(struct eth_device *dev, bd_t *bis)
eeprom[0x0b] = ((bis->bi_enetaddr[3] & 0xff) << 8) | (bis->bi_enetaddr[2] & 0xff);
eeprom[0x0c] = ((bis->bi_enetaddr[5] & 0xff) << 8) | (bis->bi_enetaddr[4] & 0xff);
- for (i=0; i<0x40; i++)
- {
+ for (i=0; i<0x40; i++) {
write_srom(dev, DE4X5_APROM, i, eeprom[i]);
}
}
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 6131b5c..01e2f14 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -17,17 +17,17 @@
(C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match
- 06/22/2001 Support DM9801 progrmming
- E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
- E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
- R17 = (R17 & 0xfff0) | NF + 3
- E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
- R17 = (R17 & 0xfff0) | NF
-
-v1.00 modify by simon 2001.9.5
+ 06/22/2001 Support DM9801 progrmming
+ E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
+ E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
+ R17 = (R17 & 0xfff0) | NF + 3
+ E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
+ R17 = (R17 & 0xfff0) | NF
+
+v1.00 modify by simon 2001.9.5
change for kernel 2.4.x
-v1.1 11/09/2001 fix force mode bug
+v1.1 11/09/2001 fix force mode bug
v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
Fixed phy reset.
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index 822afc5..851467d 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -15,7 +15,7 @@
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
The full GNU General Public License is included in this distribution in the
file called LICENSE.
@@ -44,7 +44,7 @@
#ifdef E1000_DEBUG
#define E1000_DBG(args...) printf("e1000: " args)
#define DEBUGOUT(fmt,args...) printf(fmt ,##args)
-#define DEBUGFUNC() printf("%s\n", __FUNCTION__);
+#define DEBUGFUNC() printf("%s\n", __FUNCTION__);
#else
#define E1000_DBG(args...)
#define DEBUGFUNC()
@@ -193,35 +193,35 @@ struct e1000_phy_stats {
};
/* Error Codes */
-#define E1000_SUCCESS 0
-#define E1000_ERR_EEPROM 1
-#define E1000_ERR_PHY 2
-#define E1000_ERR_CONFIG 3
-#define E1000_ERR_PARAM 4
-#define E1000_ERR_MAC_TYPE 5
-#define E1000_ERR_PHY_TYPE 6
-#define E1000_ERR_NOLINK 7
-#define E1000_ERR_TIMEOUT 8
-#define E1000_ERR_RESET 9
-#define E1000_ERR_MASTER_REQUESTS_PENDING 10
-#define E1000_ERR_HOST_INTERFACE_COMMAND 11
-#define E1000_BLK_PHY_RESET 12
+#define E1000_SUCCESS 0
+#define E1000_ERR_EEPROM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_TYPE 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_NOLINK 7
+#define E1000_ERR_TIMEOUT 8
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
/* PCI Device IDs */
-#define E1000_DEV_ID_82542 0x1000
+#define E1000_DEV_ID_82542 0x1000
#define E1000_DEV_ID_82543GC_FIBER 0x1001
#define E1000_DEV_ID_82543GC_COPPER 0x1004
#define E1000_DEV_ID_82544EI_COPPER 0x1008
#define E1000_DEV_ID_82544EI_FIBER 0x1009
#define E1000_DEV_ID_82544GC_COPPER 0x100C
#define E1000_DEV_ID_82544GC_LOM 0x100D
-#define E1000_DEV_ID_82540EM 0x100E
+#define E1000_DEV_ID_82540EM 0x100E
#define E1000_DEV_ID_82540EM_LOM 0x1015
#define E1000_DEV_ID_82545EM_COPPER 0x100F
#define E1000_DEV_ID_82545EM_FIBER 0x1011
#define E1000_DEV_ID_82546EB_COPPER 0x1010
#define E1000_DEV_ID_82546EB_FIBER 0x1012
-#define E1000_DEV_ID_82541ER 0x1078
+#define E1000_DEV_ID_82541ER 0x1078
#define NUM_DEV_IDS 14
#define NODE_ADDRESS_SIZE 6
@@ -240,24 +240,24 @@ struct e1000_phy_stats {
#define FULL_DUPLEX 2
/* The sizes (in bytes) of a ethernet packet */
-#define ENET_HEADER_SIZE 14
+#define ENET_HEADER_SIZE 14
#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */
#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
-#define ETHERNET_FCS_SIZE 4
+#define ETHERNET_FCS_SIZE 4
#define MAXIMUM_ETHERNET_PACKET_SIZE \
(MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define MINIMUM_ETHERNET_PACKET_SIZE \
(MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
-#define CRC_LENGTH ETHERNET_FCS_SIZE
-#define MAX_JUMBO_FRAME_SIZE 0x3F00
+#define CRC_LENGTH ETHERNET_FCS_SIZE
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
/* 802.1q VLAN Packet Sizes */
-#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
/* Ethertype field values */
#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
-#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
-#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
+#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
+#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
/* Packet Header defines */
#define IP_PROTOCOL_TCP 6
@@ -269,7 +269,7 @@ struct e1000_phy_stats {
* o RXSEQ = Receive Sequence Error
*/
#define POLL_IMS_ENABLE_MASK ( \
- E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXDMT0 | \
E1000_IMS_RXSEQ)
/* This defines the bits that are set in the Interrupt Mask
@@ -281,10 +281,10 @@ struct e1000_phy_stats {
* o LSC = Link Status Change
*/
#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
E1000_IMS_LSC)
/* The number of high/low register pairs in the RAR. The RAR (Receive Address
@@ -308,32 +308,32 @@ struct e1000_rx_desc {
};
/* Receive Decriptor bit definitions */
-#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
-#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
-#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
-#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
-#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
-#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
-#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
-#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
-#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
-#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
-#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
-#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
#define E1000_RXD_SPC_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */
-#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
#define E1000_RXD_SPC_CFI_SHIFT 0x000C /* CFI is bit 12 */
/* mask to determine if packets should be dropped due to frame errors */
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
- E1000_RXD_ERR_CE | \
- E1000_RXD_ERR_SE | \
- E1000_RXD_ERR_SEQ | \
- E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
E1000_RXD_ERR_RXE)
/* Transmit Descriptor */
@@ -430,8 +430,8 @@ struct e1000_data_desc {
};
/* Filters */
-#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
-#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
+#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
/* Receive Address Register */
@@ -451,8 +451,8 @@ struct e1000_ipv4_at_entry {
/* Four wakeup IP addresses are supported */
#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
-#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
-#define E1000_IP6AT_SIZE 1
+#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP6AT_SIZE 1
/* IPv6 Address Table Entry */
struct e1000_ipv6_at_entry {
@@ -481,7 +481,7 @@ struct e1000_ffvt_entry {
#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
/* Each Flexible Filter is at most 128 (0x80) bytes in length */
-#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
@@ -636,7 +636,7 @@ struct e1000_ffvt_entry {
#define E1000_82542_FCAH E1000_FCAH
#define E1000_82542_FCT E1000_FCT
#define E1000_82542_VET E1000_VET
-#define E1000_82542_RA 0x00040
+#define E1000_82542_RA 0x00040
#define E1000_82542_ICR E1000_ICR
#define E1000_82542_ITR E1000_ITR
#define E1000_82542_ICS E1000_ICS
@@ -685,7 +685,7 @@ struct e1000_ffvt_entry {
#define E1000_82542_MCC E1000_MCC
#define E1000_82542_LATECOL E1000_LATECOL
#define E1000_82542_COLC E1000_COLC
-#define E1000_82542_DC E1000_DC
+#define E1000_82542_DC E1000_DC
#define E1000_82542_TNCRS E1000_TNCRS
#define E1000_82542_SEC E1000_SEC
#define E1000_82542_CEXTERR E1000_CEXTERR
@@ -886,14 +886,14 @@ struct e1000_hw {
/* Register Bit Masks */
/* Device Control */
-#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
-#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
-#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
@@ -910,30 +910,30 @@ struct e1000_hw {
#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
-#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
-#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
-#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
/* Device Status */
-#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
-#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
-#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
-#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
-#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
#define E1000_STATUS_SPEED_MASK 0x000000C0
-#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
-#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
-#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
-#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
-#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
/* Constants used to intrepret the masked PCI-X bus speed. */
@@ -942,17 +942,17 @@ struct e1000_hw {
#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
/* EEPROM/Flash Control */
-#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
-#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
-#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
-#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
+#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
+#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
#define E1000_EECD_FWE_MASK 0x00000030
#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
#define E1000_EECD_FWE_SHIFT 4
#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
-#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
-#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
+#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
/* EEPROM Read */
@@ -964,27 +964,27 @@ struct e1000_hw {
#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
/* Extended Device Control */
-#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
-#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
-#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
-#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
-#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
-#define E1000_CTRL_EXT_SWDPIN6 0x00000040 /* SWDPIN 6 value */
+#define E1000_CTRL_EXT_SWDPIN6 0x00000040 /* SWDPIN 6 value */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
-#define E1000_CTRL_EXT_SWDPIN7 0x00000080 /* SWDPIN 7 value */
+#define E1000_CTRL_EXT_SWDPIN7 0x00000080 /* SWDPIN 7 value */
#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
-#define E1000_CTRL_EXT_SWDPIO6 0x00000400 /* SWDPIN 6 Input or output */
+#define E1000_CTRL_EXT_SWDPIO6 0x00000400 /* SWDPIN 6 Input or output */
#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
-#define E1000_CTRL_EXT_SWDPIO7 0x00000800 /* SWDPIN 7 Input or output */
-#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
-#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
-#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SWDPIO7 0x00000800 /* SWDPIN 7 Input or output */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
@@ -1010,152 +1010,152 @@ struct e1000_hw {
/* LED Control */
#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
#define E1000_LEDCTL_LED0_MODE_SHIFT 0
-#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
#define E1000_LEDCTL_LED0_BLINK 0x00000080
#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
#define E1000_LEDCTL_LED1_MODE_SHIFT 8
-#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
#define E1000_LEDCTL_LED1_BLINK 0x00008000
#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
#define E1000_LEDCTL_LED2_MODE_SHIFT 16
-#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
#define E1000_LEDCTL_LED2_BLINK 0x00800000
#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
#define E1000_LEDCTL_LED3_MODE_SHIFT 24
-#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
#define E1000_LEDCTL_LED3_BLINK 0x80000000
-#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
-#define E1000_LEDCTL_MODE_LINK_UP 0x2
-#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
-#define E1000_LEDCTL_MODE_LINK_10 0x5
-#define E1000_LEDCTL_MODE_LINK_100 0x6
-#define E1000_LEDCTL_MODE_LINK_1000 0x7
-#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
-#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
-#define E1000_LEDCTL_MODE_COLLISION 0xA
-#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
-#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
-#define E1000_LEDCTL_MODE_PAUSED 0xD
-#define E1000_LEDCTL_MODE_LED_ON 0xE
-#define E1000_LEDCTL_MODE_LED_OFF 0xF
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
/* Receive Address */
#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
/* Interrupt Cause Read */
-#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
-#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
-#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
-#define E1000_ICR_RXO 0x00000040 /* rx overrun */
-#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
-#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
#define E1000_ICR_TXD_LOW 0x00008000
-#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_SRPD 0x00010000
/* Interrupt Cause Set */
-#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
-#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_SRPD E1000_ICR_SRPD
/* Interrupt Mask Set */
-#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
-#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_SRPD E1000_ICR_SRPD
/* Interrupt Mask Clear */
-#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
-#define E1000_IMC_SRPD E1000_ICR_SRPD
+#define E1000_IMC_SRPD E1000_ICR_SRPD
/* Receive Control */
-#define E1000_RCTL_RST 0x00000001 /* Software reset */
-#define E1000_RCTL_EN 0x00000002 /* enable */
-#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
-#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
-#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
-#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
-#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
-#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
-#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
-#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
-#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
-#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
-#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
-#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
-#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
-#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
-#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
-#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
-#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
-#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
-#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
-#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
-#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
-#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
-#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
-#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
-#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
-#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
-#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
-#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
/* Receive Descriptor */
#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
-#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
+#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
-#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
-#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
+#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
+#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
/* Flow Control */
#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
@@ -1178,35 +1178,35 @@ struct e1000_hw {
#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
/* Transmit Configuration Word */
-#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
-#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
-#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
-#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
-#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
-#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
-#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
/* Receive Configuration Word */
-#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
-#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
-#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
-#define E1000_RXCW_CC 0x10000000 /* Receive config change */
-#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
-#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
/* Transmit Control */
-#define E1000_TCTL_RST 0x00000001 /* software reset */
-#define E1000_TCTL_EN 0x00000002 /* enable tx */
-#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
-#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
-#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
-#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
@@ -1218,18 +1218,18 @@ struct e1000_hw {
/* Definitions for power management and wakeup registers */
/* Wake Up Control */
-#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
/* Wake Up Filter Control */
#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
@@ -1256,26 +1256,26 @@ struct e1000_hw {
#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
/* Management Control */
-#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
-#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
-#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
-#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
-#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
-#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
-#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
-#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
* Filtering */
-#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
-#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
-#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
-#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
-#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
-#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
-#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
@@ -1283,7 +1283,7 @@ struct e1000_hw {
/* Wake Up Packet Length */
#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
-#define E1000_MDALIGN 4096
+#define E1000_MDALIGN 4096
/* EEPROM Commands */
#define EEPROM_READ_OPCODE 0x6 /* EERPOM read opcode */
@@ -1293,17 +1293,17 @@ struct e1000_hw {
#define EEPROM_EWDS_OPCODE 0x10 /* EERPOM erast/write disable */
/* EEPROM Word Offsets */
-#define EEPROM_COMPAT 0x0003
-#define EEPROM_ID_LED_SETTINGS 0x0004
+#define EEPROM_COMPAT 0x0003
+#define EEPROM_ID_LED_SETTINGS 0x0004
#define EEPROM_INIT_CONTROL1_REG 0x000A
#define EEPROM_INIT_CONTROL2_REG 0x000F
-#define EEPROM_FLASH_VERSION 0x0032
-#define EEPROM_CHECKSUM_REG 0x003F
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
/* Word definitions for ID LED Settings */
#define ID_LED_RESERVED_0000 0x0000
#define ID_LED_RESERVED_FFFF 0xFFFF
-#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
(ID_LED_OFF1_OFF2 << 8) | \
(ID_LED_DEF1_DEF2 << 4) | \
(ID_LED_DEF1_DEF2))
@@ -1311,7 +1311,7 @@ struct e1000_hw {
#define ID_LED_DEF1_ON2 0x2
#define ID_LED_DEF1_OFF2 0x3
#define ID_LED_ON1_DEF2 0x4
-#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_ON2 0x5
#define ID_LED_ON1_OFF2 0x6
#define ID_LED_OFF1_DEF2 0x7
#define ID_LED_OFF1_ON2 0x8
@@ -1330,9 +1330,9 @@ struct e1000_hw {
/* Mask bits for fields in Word 0x0f of the EEPROM */
#define EEPROM_WORD0F_PAUSE_MASK 0x3000
-#define EEPROM_WORD0F_PAUSE 0x1000
-#define EEPROM_WORD0F_ASM_DIR 0x2000
-#define EEPROM_WORD0F_ANE 0x0800
+#define EEPROM_WORD0F_PAUSE 0x1000
+#define EEPROM_WORD0F_ASM_DIR 0x2000
+#define EEPROM_WORD0F_ANE 0x0800
#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
@@ -1340,19 +1340,19 @@ struct e1000_hw {
/* EEPROM Map defines (WORD OFFSETS)*/
#define EEPROM_NODE_ADDRESS_BYTE_0 0
-#define EEPROM_PBA_BYTE_1 8
+#define EEPROM_PBA_BYTE_1 8
/* EEPROM Map Sizes (Byte Counts) */
#define PBA_SIZE 4
/* Collision related configuration parameters */
-#define E1000_COLLISION_THRESHOLD 16
-#define E1000_CT_SHIFT 4
-#define E1000_COLLISION_DISTANCE 64
-#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
-#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_COLLISION_THRESHOLD 16
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 64
+#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
#define E1000_GB_HDX_COLLISION_DISTANCE 512
-#define E1000_COLD_SHIFT 12
+#define E1000_COLD_SHIFT 12
/* The number of Transmit and Receive Descriptors must be a multiple of 8 */
#define REQ_TX_DESCRIPTOR_MULTIPLE 8
@@ -1369,11 +1369,11 @@ struct e1000_hw {
#define DEFAULT_82542_TIPG_IPGR1 2
#define DEFAULT_82543_TIPG_IPGR1 8
-#define E1000_TIPG_IPGR1_SHIFT 10
+#define E1000_TIPG_IPGR1_SHIFT 10
#define DEFAULT_82542_TIPG_IPGR2 10
#define DEFAULT_82543_TIPG_IPGR2 6
-#define E1000_TIPG_IPGR2_SHIFT 20
+#define E1000_TIPG_IPGR2_SHIFT 20
#define E1000_TXDMAC_DPP 0x00000001
@@ -1384,11 +1384,11 @@ struct e1000_hw {
#define TX_THRESHOLD_STOP 190
#define TX_THRESHOLD_DISABLE 0
#define TX_THRESHOLD_TIMER_MS 10000
-#define MIN_NUM_XMITS 1000
-#define IFS_MAX 80
-#define IFS_STEP 10
-#define IFS_MIN 40
-#define IFS_RATIO 4
+#define MIN_NUM_XMITS 1000
+#define IFS_MAX 80
+#define IFS_STEP 10
+#define IFS_MIN 40
+#define IFS_RATIO 4
/* PBA constants */
#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
@@ -1399,12 +1399,12 @@ struct e1000_hw {
/* Flow Control Constants */
#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
-#define FLOW_CONTROL_TYPE 0x8808
+#define FLOW_CONTROL_TYPE 0x8808
/* The historical defaults for the flow control values are given below. */
-#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
-#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
-#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
/* Flow Control High-Watermark: 43464 bytes */
#define E1000_FC_HIGH_THRESH 0xA9C8
@@ -1414,7 +1414,7 @@ struct e1000_hw {
#define E1000_FC_PAUSE_TIME 0x0680
/* PCIX Config space */
-#define PCIX_COMMAND_REGISTER 0xE6
+#define PCIX_COMMAND_REGISTER 0xE6
#define PCIX_STATUS_REGISTER_LO 0xE8
#define PCIX_STATUS_REGISTER_HI 0xEA
@@ -1453,7 +1453,7 @@ struct e1000_hw {
#define RECEIVE_BUFFER_ALIGN_SIZE (256)
/* The number of milliseconds we wait for auto-negotiation to complete */
-#define LINK_UP_TIMEOUT 500
+#define LINK_UP_TIMEOUT 500
#define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
@@ -1463,14 +1463,14 @@ struct e1000_hw {
/* TBI_ACCEPT macro definition:
*
* This macro requires:
- * adapter = a pointer to struct e1000_hw
- * status = the 8 bit status field of the RX descriptor with EOP set
- * error = the 8 bit error field of the RX descriptor with EOP set
- * length = the sum of all the length fields of the RX descriptors that
- * make up the current frame
- * last_byte = the last byte of the frame DMAed by the hardware
- * max_frame_length = the maximum frame length we want to accept.
- * min_frame_length = the minimum frame length we want to accept.
+ * adapter = a pointer to struct e1000_hw
+ * status = the 8 bit status field of the RX descriptor with EOP set
+ * error = the 8 bit error field of the RX descriptor with EOP set
+ * length = the sum of all the length fields of the RX descriptors that
+ * make up the current frame
+ * last_byte = the last byte of the frame DMAed by the hardware
+ * max_frame_length = the maximum frame length we want to accept.
+ * min_frame_length = the minimum frame length we want to accept.
*
* This macro is a conditional that should be used in the interrupt
* handler's Rx processing routine when RxErrors have been detected.
@@ -1478,11 +1478,11 @@ struct e1000_hw {
* Typical use:
* ...
* if (TBI_ACCEPT) {
- * accept_frame = TRUE;
- * e1000_tbi_adjust_stats(adapter, MacAddress);
- * frame_length--;
+ * accept_frame = TRUE;
+ * e1000_tbi_adjust_stats(adapter, MacAddress);
+ * frame_length--;
* } else {
- * accept_frame = FALSE;
+ * accept_frame = FALSE;
* }
* ...
*/
@@ -1502,237 +1502,237 @@ struct e1000_hw {
/* Bit definitions for the Management Data IO (MDIO) and Management Data
* Clock (MDC) pins in the Device Control Register.
*/
-#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
-#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
-#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
-#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
-#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
-#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
-#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
-#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
-#define PHY_CTRL 0x00 /* Control Register */
-#define PHY_STATUS 0x01 /* Status Regiser */
-#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
-#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
-#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
-#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Regiser */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
/* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
-#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
-#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
-#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
-#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
-#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
-#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
/* IGP01E1000 specifics */
-#define IGP01E1000_IEEE_REGS_PAGE 0x0000
+#define IGP01E1000_IEEE_REGS_PAGE 0x0000
#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
-#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
+#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
/* IGP01E1000 Specific Registers */
-#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
-#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
-#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
-#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
-#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
-#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
-#define IGP02E1000_PHY_POWER_MGMT 0x19
-#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP02E1000_PHY_POWER_MGMT 0x19
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
/* PHY Control Register */
-#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
-#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN 0x0800 /* Power down */
-#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
/* PHY Status Register */
-#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
-#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
/* Autoneg Advertisement Register */
-#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
-#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
-#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
-#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
-#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
-#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
-#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
/* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
-#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
-#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
-#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
-#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
-#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
-#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
-#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
-#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
-#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
/* Autoneg Expansion Register */
-#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
-#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
-#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
-#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
-#define NWAY_ER_PAR_DETECT_FAULT 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0100 /* LP is 100TX Full Duplex Capable */
/* Next Page TX Register */
-#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
- * of different NP
- */
-#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
- * 0 = cannot comply with msg
- */
-#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
-#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
- * 0 = sending last NP
- */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
/* Link Partner Next Page Register */
-#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
- * of different NP
- */
-#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
- * 0 = cannot comply with msg
- */
-#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
-#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
-#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
- * 0 = sending last NP
- */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
/* 1000BASE-T Control Register */
-#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
-#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
-#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
- /* 0=DTE device */
-#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
- /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
- /* 0=Automatic Master/Slave config */
-#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
-#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
-#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
-#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
/* 1000BASE-T Status Register */
-#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
-#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
-#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
-#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
-#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
-#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
-#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
/* Extended Status Register */
-#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
-#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
-#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
-#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
-#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
-#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
+#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
-#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
- /* (0=enable, 1=disable) */
+#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
+ /* (0=enable, 1=disable) */
/* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
-#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
* 0=CLK125 toggling
*/
-#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
- /* Manual MDI configuration */
-#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
-#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
* 100BASE-TX/10BASE-T:
* MDI Mode
*/
-#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
* all speeds.
*/
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
- /* 1=Enable Extended 10BASE-T distance
- * (Lower 10BASE-T RX Threshold)
- * 0=Normal 10BASE-T RX Threshold */
-#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
- /* 1=5-Bit interface in 100BASE-TX
- * 0=MII interface in 100BASE-TX */
-#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
-#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
-
-#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
-#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
+ /* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+ /* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
/* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
-#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
-#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
- * 3=110-140M;4=>140M */
-#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
-#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
-#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
-#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
-#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
-#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
-#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
+ * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
-#define M88E1000_PSSR_MDIX_SHIFT 6
+#define M88E1000_PSSR_MDIX_SHIFT 6
#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
/* M88E1000 Extended PHY Specific Control Register */
-#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
-#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
* Will assert lost lock and bring
* link down if idle not seen
* within 1ms in 1000BASE-T
@@ -1751,41 +1751,41 @@ struct e1000_hw {
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
-#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
-#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
-#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
/* Bit definitions for valid PHY IDs. */
-#define M88E1000_E_PHY_ID 0x01410C50
-#define M88E1000_I_PHY_ID 0x01410C30
-#define M88E1011_I_PHY_ID 0x01410C20
-#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
-#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
-#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
+#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
+#define IGP01E1000_I_PHY_ID 0x02A80380
/* Miscellaneous PHY bit definitions. */
-#define PHY_PREAMBLE 0xFFFFFFFF
-#define PHY_SOF 0x01
-#define PHY_OP_READ 0x02
-#define PHY_OP_WRITE 0x01
-#define PHY_TURNAROUND 0x02
-#define PHY_PREAMBLE_SIZE 32
-#define MII_CR_SPEED_1000 0x0040
-#define MII_CR_SPEED_100 0x2000
-#define MII_CR_SPEED_10 0x0000
-#define E1000_PHY_ADDRESS 0x01
-#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
-#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
-#define PHY_REVISION_MASK 0xFFFFFFF0
-#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
-#define REG4_SPEED_MASK 0x01E0
-#define REG9_SPEED_MASK 0x0300
-#define ADVERTISE_10_HALF 0x0001
-#define ADVERTISE_10_FULL 0x0002
-#define ADVERTISE_100_HALF 0x0004
-#define ADVERTISE_100_FULL 0x0008
-#define ADVERTISE_1000_HALF 0x0010
-#define ADVERTISE_1000_FULL 0x0020
+#define PHY_PREAMBLE 0xFFFFFFFF
+#define PHY_SOF 0x01
+#define PHY_OP_READ 0x02
+#define PHY_OP_WRITE 0x01
+#define PHY_TURNAROUND 0x02
+#define PHY_PREAMBLE_SIZE 32
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+#define E1000_PHY_ADDRESS 0x01
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
+#define REG4_SPEED_MASK 0x01E0
+#define REG9_SPEED_MASK 0x0300
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
-#endif /* _E1000_HW_H_ */
+#endif /* _E1000_HW_H_ */
diff --git a/drivers/net/lan91c96.h b/drivers/net/lan91c96.h
index 7d33a82..5beddda 100644
--- a/drivers/net/lan91c96.h
+++ b/drivers/net/lan91c96.h
@@ -31,7 +31,7 @@
* information under www.smsc.com.
*
* Authors
- * Erik Stahlman ( erik@vt.edu )
+ * Erik Stahlman ( erik@vt.edu )
* Daris A Nevil ( dnevil@snmc.com )
*
* History
@@ -58,7 +58,7 @@ void smc_set_mac_addr(const unsigned char *addr);
typedef unsigned char byte;
typedef unsigned short word;
-typedef unsigned long int dword;
+typedef unsigned long int dword;
/*
* DEBUGGING LEVELS
@@ -88,8 +88,8 @@ typedef unsigned long int dword;
#define SMCREG(r) (SMC_BASE_ADDRESS+((r)<<SMC_IO_SHIFT))
-#define SMC_inl(r) (*((volatile dword *)SMCREG(r)))
-#define SMC_inw(r) (*((volatile word *)SMCREG(r)))
+#define SMC_inl(r) (*((volatile dword *)SMCREG(r)))
+#define SMC_inw(r) (*((volatile word *)SMCREG(r)))
#define SMC_inb(p) ({ \
unsigned int __p = p; \
unsigned int __v = SMC_inw(__p & ~1); \
@@ -122,7 +122,7 @@ typedef unsigned long int dword;
} \
})
-#define SMC_insl(r,b,l) ({ int __i ; \
+#define SMC_insl(r,b,l) ({ int __i ; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
@@ -131,7 +131,7 @@ typedef unsigned long int dword;
}; \
})
-#define SMC_insw(r,b,l) ({ int __i ; \
+#define SMC_insw(r,b,l) ({ int __i ; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
@@ -140,7 +140,7 @@ typedef unsigned long int dword;
}; \
})
-#define SMC_insb(r,b,l) ({ int __i ; \
+#define SMC_insb(r,b,l) ({ int __i ; \
byte *__b2; \
__b2 = (byte *) b; \
for (__i = 0; __i < l; __i++) { \
@@ -155,7 +155,7 @@ typedef unsigned long int dword;
* We have only 16 Bit PCMCIA access on Socket 0
*/
-#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF)
#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
@@ -178,9 +178,9 @@ typedef unsigned long int dword;
#endif
#if 0
-#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
+#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
#else
-#define SMC_insw(r,b,l) ({ int __i ; \
+#define SMC_insw(r,b,l) ({ int __i ; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index 71d1960..5ab4726 100644
--- a/drivers/net/mcffec.c
+++ b/drivers/net/mcffec.c
@@ -208,7 +208,7 @@ int fec_recv(struct eth_device *dev)
for (;;) {
#ifdef CFG_UNIFY_CACHE
- icache_invalid();
+ icache_invalid();
#endif
/* section 16.9.23.2 */
if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 075d6c5..a523959 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -62,58 +62,58 @@
/* defines */
#define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/
-#define DSIZE 0x00000FFF
+#define DSIZE 0x00000FFF
#define ETH_ALEN 6
-#define CRC_SIZE 4
-#define TOUT_LOOP 500000
-#define TX_BUF_SIZE 1536
-#define RX_BUF_SIZE 1536
-#define NUM_RX_DESC 4 /* Number of Rx descriptor registers. */
+#define CRC_SIZE 4
+#define TOUT_LOOP 500000
+#define TX_BUF_SIZE 1536
+#define RX_BUF_SIZE 1536
+#define NUM_RX_DESC 4 /* Number of Rx descriptor registers. */
/* Offsets to the device registers.
Unlike software-only systems, device drivers interact with complex hardware.
It's not useful to define symbolic names for every register bit in the
device. */
enum register_offsets {
- ChipCmd = 0x00,
- ChipConfig = 0x04,
- EECtrl = 0x08,
- IntrMask = 0x14,
- IntrEnable = 0x18,
- TxRingPtr = 0x20,
- TxConfig = 0x24,
- RxRingPtr = 0x30,
- RxConfig = 0x34,
- ClkRun = 0x3C,
- RxFilterAddr = 0x48,
- RxFilterData = 0x4C,
- SiliconRev = 0x58,
- PCIPM = 0x44,
+ ChipCmd = 0x00,
+ ChipConfig = 0x04,
+ EECtrl = 0x08,
+ IntrMask = 0x14,
+ IntrEnable = 0x18,
+ TxRingPtr = 0x20,
+ TxConfig = 0x24,
+ RxRingPtr = 0x30,
+ RxConfig = 0x34,
+ ClkRun = 0x3C,
+ RxFilterAddr = 0x48,
+ RxFilterData = 0x4C,
+ SiliconRev = 0x58,
+ PCIPM = 0x44,
BasicControl = 0x80,
BasicStatus = 0x84,
/* These are from the spec, around page 78... on a separate table. */
- PGSEL = 0xCC,
- PMDCSR = 0xE4,
- TSTDAT = 0xFC,
- DSPCFG = 0xF4,
- SDCFG = 0x8C
+ PGSEL = 0xCC,
+ PMDCSR = 0xE4,
+ TSTDAT = 0xFC,
+ DSPCFG = 0xF4,
+ SDCFG = 0x8C
};
/* Bit in ChipCmd. */
enum ChipCmdBits {
- ChipReset = 0x100,
- RxReset = 0x20,
- TxReset = 0x10,
- RxOff = 0x08,
- RxOn = 0x04,
- TxOff = 0x02,
- TxOn = 0x01
+ ChipReset = 0x100,
+ RxReset = 0x20,
+ TxReset = 0x10,
+ RxOff = 0x08,
+ RxOn = 0x04,
+ TxOff = 0x02,
+ TxOn = 0x01
};
enum ChipConfigBits {
- LinkSts = 0x80000000,
- HundSpeed = 0x40000000,
- FullDuplex = 0x20000000,
+ LinkSts = 0x80000000,
+ HundSpeed = 0x40000000,
+ FullDuplex = 0x20000000,
TenPolarity = 0x10000000,
AnegDone = 0x08000000,
AnegEnBothBoth = 0x0000E000,
@@ -127,58 +127,58 @@ enum ChipConfigBits {
SpeedMask = 0x00004000,
AnegMask = 0x00002000,
AnegDis10Half = 0x00000000,
- ExtPhy = 0x00001000,
- PhyRst = 0x00000400,
- PhyDis = 0x00000200,
+ ExtPhy = 0x00001000,
+ PhyRst = 0x00000400,
+ PhyDis = 0x00000200,
BootRomDisable = 0x00000004,
- BEMode = 0x00000001,
+ BEMode = 0x00000001,
};
enum TxConfig_bits {
- TxDrthMask = 0x3f,
- TxFlthMask = 0x3f00,
+ TxDrthMask = 0x3f,
+ TxFlthMask = 0x3f00,
TxMxdmaMask = 0x700000,
- TxMxdma_512 = 0x0,
- TxMxdma_4 = 0x100000,
- TxMxdma_8 = 0x200000,
- TxMxdma_16 = 0x300000,
- TxMxdma_32 = 0x400000,
- TxMxdma_64 = 0x500000,
- TxMxdma_128 = 0x600000,
- TxMxdma_256 = 0x700000,
- TxCollRetry = 0x800000,
- TxAutoPad = 0x10000000,
- TxMacLoop = 0x20000000,
- TxHeartIgn = 0x40000000,
- TxCarrierIgn = 0x80000000
+ TxMxdma_512 = 0x0,
+ TxMxdma_4 = 0x100000,
+ TxMxdma_8 = 0x200000,
+ TxMxdma_16 = 0x300000,
+ TxMxdma_32 = 0x400000,
+ TxMxdma_64 = 0x500000,
+ TxMxdma_128 = 0x600000,
+ TxMxdma_256 = 0x700000,
+ TxCollRetry = 0x800000,
+ TxAutoPad = 0x10000000,
+ TxMacLoop = 0x20000000,
+ TxHeartIgn = 0x40000000,
+ TxCarrierIgn = 0x80000000
};
enum RxConfig_bits {
- RxDrthMask = 0x3e,
- RxMxdmaMask = 0x700000,
- RxMxdma_512 = 0x0,
- RxMxdma_4 = 0x100000,
- RxMxdma_8 = 0x200000,
- RxMxdma_16 = 0x300000,
- RxMxdma_32 = 0x400000,
- RxMxdma_64 = 0x500000,
- RxMxdma_128 = 0x600000,
- RxMxdma_256 = 0x700000,
- RxAcceptLong = 0x8000000,
- RxAcceptTx = 0x10000000,
- RxAcceptRunt = 0x40000000,
- RxAcceptErr = 0x80000000
+ RxDrthMask = 0x3e,
+ RxMxdmaMask = 0x700000,
+ RxMxdma_512 = 0x0,
+ RxMxdma_4 = 0x100000,
+ RxMxdma_8 = 0x200000,
+ RxMxdma_16 = 0x300000,
+ RxMxdma_32 = 0x400000,
+ RxMxdma_64 = 0x500000,
+ RxMxdma_128 = 0x600000,
+ RxMxdma_256 = 0x700000,
+ RxAcceptLong = 0x8000000,
+ RxAcceptTx = 0x10000000,
+ RxAcceptRunt = 0x40000000,
+ RxAcceptErr = 0x80000000
};
/* Bits in the RxMode register. */
enum rx_mode_bits {
- AcceptErr = 0x20,
- AcceptRunt = 0x10,
- AcceptBroadcast = 0xC0000000,
- AcceptMulticast = 0x00200000,
- AcceptAllMulticast = 0x20000000,
- AcceptAllPhys = 0x10000000,
- AcceptMyPhys = 0x08000000
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0xC0000000,
+ AcceptMulticast = 0x00200000,
+ AcceptAllMulticast = 0x20000000,
+ AcceptAllPhys = 0x10000000,
+ AcceptMyPhys = 0x08000000
};
typedef struct _BufferDesc {
@@ -377,7 +377,7 @@ natsemi_initialize(bd_t * bis)
chip_config = INL(dev, ChipConfig);
#ifdef NATSEMI_DEBUG
printf("%s: Transceiver status %#08X advertising %#08X\n",
- dev->name, (int) INL(dev, BasicStatus), advertising);
+ dev->name, (int) INL(dev, BasicStatus), advertising);
printf("%s: Transceiver default autoneg. %s 10%s %s duplex.\n",
dev->name, chip_config & AnegMask ? "enabled, advertise" :
"disabled, force", chip_config & SpeedMask ? "0" : "",
@@ -550,7 +550,7 @@ mdio_read(struct eth_device *dev, int phy_id, int location)
*
* Arguments: struct eth_device *dev: NIC data structure
*
- * returns: int.
+ * returns: int.
*/
static int
@@ -693,8 +693,8 @@ natsemi_init_rxd(struct eth_device *dev)
#ifdef NATSEMI_DEBUG
printf
("natsemi_init_rxd: rxd[%d]=%p link=%X cmdsts=%lX bufptr=%X\n",
- i, &rxd[i], le32_to_cpu(rxd[i].link),
- rxd[i].cmdsts, rxd[i].bufptr);
+ i, &rxd[i], le32_to_cpu(rxd[i].link),
+ rxd[i].cmdsts, rxd[i].bufptr);
#endif
}
diff --git a/drivers/net/nicext.h b/drivers/net/nicext.h
index 4074972..ff422e7 100644
--- a/drivers/net/nicext.h
+++ b/drivers/net/nicext.h
@@ -30,7 +30,7 @@
/*
* ioctl for NICE
*/
-#define SIOCNICE SIOCDEVPRIVATE+7
+#define SIOCNICE SIOCDEVPRIVATE+7
/*
* SIOCNICE:
diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c
index f8b143a..c807dd4 100644
--- a/drivers/net/ns8382x.c
+++ b/drivers/net/ns8382x.c
@@ -42,11 +42,11 @@
/* Revision History
* October 2002 mar 1.0
* Initial U-Boot Release.
- * Tested with Netgear GA622T (83820)
- * and SMC9452TX (83821)
- * NOTE: custom boards with these chips may (likely) require
- * a programmed EEPROM device (if present) in order to work
- * correctly.
+ * Tested with Netgear GA622T (83820)
+ * and SMC9452TX (83821)
+ * NOTE: custom boards with these chips may (likely) require
+ * a programmed EEPROM device (if present) in order to work
+ * correctly.
*/
/* Includes */
@@ -115,50 +115,50 @@ enum ChipConfigBits {
#define SpeedStatus_Polarity ( GigSpeed | HundSpeed | FullDuplex)
enum TxConfig_bits {
- TxDrthMask = 0x000000ff,
- TxFlthMask = 0x0000ff00,
+ TxDrthMask = 0x000000ff,
+ TxFlthMask = 0x0000ff00,
TxMxdmaMask = 0x00700000,
- TxMxdma_8 = 0x00100000,
- TxMxdma_16 = 0x00200000,
- TxMxdma_32 = 0x00300000,
- TxMxdma_64 = 0x00400000,
- TxMxdma_128 = 0x00500000,
- TxMxdma_256 = 0x00600000,
- TxMxdma_512 = 0x00700000,
- TxMxdma_1024 = 0x00000000,
- TxCollRetry = 0x00800000,
- TxAutoPad = 0x10000000,
- TxMacLoop = 0x20000000,
- TxHeartIgn = 0x40000000,
- TxCarrierIgn = 0x80000000
+ TxMxdma_8 = 0x00100000,
+ TxMxdma_16 = 0x00200000,
+ TxMxdma_32 = 0x00300000,
+ TxMxdma_64 = 0x00400000,
+ TxMxdma_128 = 0x00500000,
+ TxMxdma_256 = 0x00600000,
+ TxMxdma_512 = 0x00700000,
+ TxMxdma_1024 = 0x00000000,
+ TxCollRetry = 0x00800000,
+ TxAutoPad = 0x10000000,
+ TxMacLoop = 0x20000000,
+ TxHeartIgn = 0x40000000,
+ TxCarrierIgn = 0x80000000
};
enum RxConfig_bits {
- RxDrthMask = 0x0000003e,
- RxMxdmaMask = 0x00700000,
- RxMxdma_8 = 0x00100000,
- RxMxdma_16 = 0x00200000,
- RxMxdma_32 = 0x00300000,
- RxMxdma_64 = 0x00400000,
- RxMxdma_128 = 0x00500000,
- RxMxdma_256 = 0x00600000,
- RxMxdma_512 = 0x00700000,
- RxMxdma_1024 = 0x00000000,
- RxAcceptLenErr = 0x04000000,
- RxAcceptLong = 0x08000000,
- RxAcceptTx = 0x10000000,
- RxStripCRC = 0x20000000,
- RxAcceptRunt = 0x40000000,
- RxAcceptErr = 0x80000000,
+ RxDrthMask = 0x0000003e,
+ RxMxdmaMask = 0x00700000,
+ RxMxdma_8 = 0x00100000,
+ RxMxdma_16 = 0x00200000,
+ RxMxdma_32 = 0x00300000,
+ RxMxdma_64 = 0x00400000,
+ RxMxdma_128 = 0x00500000,
+ RxMxdma_256 = 0x00600000,
+ RxMxdma_512 = 0x00700000,
+ RxMxdma_1024 = 0x00000000,
+ RxAcceptLenErr = 0x04000000,
+ RxAcceptLong = 0x08000000,
+ RxAcceptTx = 0x10000000,
+ RxStripCRC = 0x20000000,
+ RxAcceptRunt = 0x40000000,
+ RxAcceptErr = 0x80000000,
};
/* Bits in the RxMode register. */
enum rx_mode_bits {
- RxFilterEnable = 0x80000000,
- AcceptAllBroadcast = 0x40000000,
- AcceptAllMulticast = 0x20000000,
- AcceptAllUnicast = 0x10000000,
- AcceptPerfectMatch = 0x08000000,
+ RxFilterEnable = 0x80000000,
+ AcceptAllBroadcast = 0x40000000,
+ AcceptAllMulticast = 0x20000000,
+ AcceptAllUnicast = 0x10000000,
+ AcceptPerfectMatch = 0x08000000,
};
typedef struct _BufferDesc {
@@ -527,7 +527,7 @@ mdio_write(struct eth_device *dev, int phy_id, int addr, int value)
* Description: resets the ethernet controller chip and configures
* registers and data structures required for sending and receiving packets.
* Arguments: struct eth_device *dev: NIC data structure
- * returns: int.
+ * returns: int.
*/
static int
diff --git a/drivers/net/plb2800_eth.c b/drivers/net/plb2800_eth.c
index 0ae5d80..b8cc57a 100644
--- a/drivers/net/plb2800_eth.c
+++ b/drivers/net/plb2800_eth.c
@@ -333,7 +333,7 @@ static void plb2800_set_mac_addr(struct eth_device *dev, unsigned char * addr)
DA_LOOKUP = temp;
/* Set MA_LEARN register */
- temp = 50 << MA_DEST_SHF; /* static entry */
+ temp = 50 << MA_DEST_SHF; /* static entry */
MA_LEARN = temp;
/* set destination address */
diff --git a/drivers/net/rtl8019.h b/drivers/net/rtl8019.h
index 38116ad..ae5163c 100644
--- a/drivers/net/rtl8019.h
+++ b/drivers/net/rtl8019.h
@@ -30,88 +30,85 @@
#include <asm/types.h>
#include <config.h>
-
#ifdef CONFIG_DRIVER_RTL8019
-#define RTL8019_REG_00 (RTL8019_BASE + 0x00)
-#define RTL8019_REG_01 (RTL8019_BASE + 0x01)
-#define RTL8019_REG_02 (RTL8019_BASE + 0x02)
-#define RTL8019_REG_03 (RTL8019_BASE + 0x03)
-#define RTL8019_REG_04 (RTL8019_BASE + 0x04)
-#define RTL8019_REG_05 (RTL8019_BASE + 0x05)
-#define RTL8019_REG_06 (RTL8019_BASE + 0x06)
-#define RTL8019_REG_07 (RTL8019_BASE + 0x07)
-#define RTL8019_REG_08 (RTL8019_BASE + 0x08)
-#define RTL8019_REG_09 (RTL8019_BASE + 0x09)
-#define RTL8019_REG_0a (RTL8019_BASE + 0x0a)
-#define RTL8019_REG_0b (RTL8019_BASE + 0x0b)
-#define RTL8019_REG_0c (RTL8019_BASE + 0x0c)
-#define RTL8019_REG_0d (RTL8019_BASE + 0x0d)
-#define RTL8019_REG_0e (RTL8019_BASE + 0x0e)
-#define RTL8019_REG_0f (RTL8019_BASE + 0x0f)
-#define RTL8019_REG_10 (RTL8019_BASE + 0x10)
-#define RTL8019_REG_1f (RTL8019_BASE + 0x1f)
-
-#define RTL8019_COMMAND RTL8019_REG_00
-#define RTL8019_PAGESTART RTL8019_REG_01
-#define RTL8019_PAGESTOP RTL8019_REG_02
-#define RTL8019_BOUNDARY RTL8019_REG_03
-#define RTL8019_TRANSMITSTATUS RTL8019_REG_04
-#define RTL8019_TRANSMITPAGE RTL8019_REG_04
-#define RTL8019_TRANSMITBYTECOUNT0 RTL8019_REG_05
-#define RTL8019_NCR RTL8019_REG_05
-#define RTL8019_TRANSMITBYTECOUNT1 RTL8019_REG_06
-#define RTL8019_INTERRUPTSTATUS RTL8019_REG_07
-#define RTL8019_CURRENT RTL8019_REG_07
-#define RTL8019_REMOTESTARTADDRESS0 RTL8019_REG_08
-#define RTL8019_CRDMA0 RTL8019_REG_08
-#define RTL8019_REMOTESTARTADDRESS1 RTL8019_REG_09
-#define RTL8019_CRDMA1 RTL8019_REG_09
-#define RTL8019_REMOTEBYTECOUNT0 RTL8019_REG_0a
-#define RTL8019_REMOTEBYTECOUNT1 RTL8019_REG_0b
-#define RTL8019_RECEIVESTATUS RTL8019_REG_0c
-#define RTL8019_RECEIVECONFIGURATION RTL8019_REG_0c
-#define RTL8019_TRANSMITCONFIGURATION RTL8019_REG_0d
-#define RTL8019_FAE_TALLY RTL8019_REG_0d
-#define RTL8019_DATACONFIGURATION RTL8019_REG_0e
-#define RTL8019_CRC_TALLY RTL8019_REG_0e
-#define RTL8019_INTERRUPTMASK RTL8019_REG_0f
-#define RTL8019_MISS_PKT_TALLY RTL8019_REG_0f
-#define RTL8019_PHYSICALADDRESS0 RTL8019_REG_01
-#define RTL8019_PHYSICALADDRESS1 RTL8019_REG_02
-#define RTL8019_PHYSICALADDRESS2 RTL8019_REG_03
-#define RTL8019_PHYSICALADDRESS3 RTL8019_REG_04
-#define RTL8019_PHYSICALADDRESS4 RTL8019_REG_05
-#define RTL8019_PHYSICALADDRESS5 RTL8019_REG_06
-#define RTL8019_MULTIADDRESS0 RTL8019_REG_08
-#define RTL8019_MULTIADDRESS1 RTL8019_REG_09
-#define RTL8019_MULTIADDRESS2 RTL8019_REG_0a
-#define RTL8019_MULTIADDRESS3 RTL8019_REG_0b
-#define RTL8019_MULTIADDRESS4 RTL8019_REG_0c
-#define RTL8019_MULTIADDRESS5 RTL8019_REG_0d
-#define RTL8019_MULTIADDRESS6 RTL8019_REG_0e
-#define RTL8019_MULTIADDRESS7 RTL8019_REG_0f
-#define RTL8019_DMA_DATA RTL8019_REG_10
-#define RTL8019_RESET RTL8019_REG_1f
-
+#define RTL8019_REG_00 (RTL8019_BASE + 0x00)
+#define RTL8019_REG_01 (RTL8019_BASE + 0x01)
+#define RTL8019_REG_02 (RTL8019_BASE + 0x02)
+#define RTL8019_REG_03 (RTL8019_BASE + 0x03)
+#define RTL8019_REG_04 (RTL8019_BASE + 0x04)
+#define RTL8019_REG_05 (RTL8019_BASE + 0x05)
+#define RTL8019_REG_06 (RTL8019_BASE + 0x06)
+#define RTL8019_REG_07 (RTL8019_BASE + 0x07)
+#define RTL8019_REG_08 (RTL8019_BASE + 0x08)
+#define RTL8019_REG_09 (RTL8019_BASE + 0x09)
+#define RTL8019_REG_0a (RTL8019_BASE + 0x0a)
+#define RTL8019_REG_0b (RTL8019_BASE + 0x0b)
+#define RTL8019_REG_0c (RTL8019_BASE + 0x0c)
+#define RTL8019_REG_0d (RTL8019_BASE + 0x0d)
+#define RTL8019_REG_0e (RTL8019_BASE + 0x0e)
+#define RTL8019_REG_0f (RTL8019_BASE + 0x0f)
+#define RTL8019_REG_10 (RTL8019_BASE + 0x10)
+#define RTL8019_REG_1f (RTL8019_BASE + 0x1f)
-#define RTL8019_PAGE0 0x22
-#define RTL8019_PAGE1 0x62
-#define RTL8019_PAGE0DMAWRITE 0x12
-#define RTL8019_PAGE2DMAWRITE 0x92
-#define RTL8019_REMOTEDMAWR 0x12
-#define RTL8019_REMOTEDMARD 0x0A
-#define RTL8019_ABORTDMAWR 0x32
-#define RTL8019_ABORTDMARD 0x2A
-#define RTL8019_PAGE0STOP 0x21
-#define RTL8019_PAGE1STOP 0x61
-#define RTL8019_TRANSMIT 0x26
-#define RTL8019_TXINPROGRESS 0x04
-#define RTL8019_SEND 0x1A
+#define RTL8019_COMMAND RTL8019_REG_00
+#define RTL8019_PAGESTART RTL8019_REG_01
+#define RTL8019_PAGESTOP RTL8019_REG_02
+#define RTL8019_BOUNDARY RTL8019_REG_03
+#define RTL8019_TRANSMITSTATUS RTL8019_REG_04
+#define RTL8019_TRANSMITPAGE RTL8019_REG_04
+#define RTL8019_TRANSMITBYTECOUNT0 RTL8019_REG_05
+#define RTL8019_NCR RTL8019_REG_05
+#define RTL8019_TRANSMITBYTECOUNT1 RTL8019_REG_06
+#define RTL8019_INTERRUPTSTATUS RTL8019_REG_07
+#define RTL8019_CURRENT RTL8019_REG_07
+#define RTL8019_REMOTESTARTADDRESS0 RTL8019_REG_08
+#define RTL8019_CRDMA0 RTL8019_REG_08
+#define RTL8019_REMOTESTARTADDRESS1 RTL8019_REG_09
+#define RTL8019_CRDMA1 RTL8019_REG_09
+#define RTL8019_REMOTEBYTECOUNT0 RTL8019_REG_0a
+#define RTL8019_REMOTEBYTECOUNT1 RTL8019_REG_0b
+#define RTL8019_RECEIVESTATUS RTL8019_REG_0c
+#define RTL8019_RECEIVECONFIGURATION RTL8019_REG_0c
+#define RTL8019_TRANSMITCONFIGURATION RTL8019_REG_0d
+#define RTL8019_FAE_TALLY RTL8019_REG_0d
+#define RTL8019_DATACONFIGURATION RTL8019_REG_0e
+#define RTL8019_CRC_TALLY RTL8019_REG_0e
+#define RTL8019_INTERRUPTMASK RTL8019_REG_0f
+#define RTL8019_MISS_PKT_TALLY RTL8019_REG_0f
+#define RTL8019_PHYSICALADDRESS0 RTL8019_REG_01
+#define RTL8019_PHYSICALADDRESS1 RTL8019_REG_02
+#define RTL8019_PHYSICALADDRESS2 RTL8019_REG_03
+#define RTL8019_PHYSICALADDRESS3 RTL8019_REG_04
+#define RTL8019_PHYSICALADDRESS4 RTL8019_REG_05
+#define RTL8019_PHYSICALADDRESS5 RTL8019_REG_06
+#define RTL8019_MULTIADDRESS0 RTL8019_REG_08
+#define RTL8019_MULTIADDRESS1 RTL8019_REG_09
+#define RTL8019_MULTIADDRESS2 RTL8019_REG_0a
+#define RTL8019_MULTIADDRESS3 RTL8019_REG_0b
+#define RTL8019_MULTIADDRESS4 RTL8019_REG_0c
+#define RTL8019_MULTIADDRESS5 RTL8019_REG_0d
+#define RTL8019_MULTIADDRESS6 RTL8019_REG_0e
+#define RTL8019_MULTIADDRESS7 RTL8019_REG_0f
+#define RTL8019_DMA_DATA RTL8019_REG_10
+#define RTL8019_RESET RTL8019_REG_1f
-#define RTL8019_PSTART 0x4c
-#define RTL8019_PSTOP 0x80
-#define RTL8019_TPSTART 0x40
+#define RTL8019_PAGE0 0x22
+#define RTL8019_PAGE1 0x62
+#define RTL8019_PAGE0DMAWRITE 0x12
+#define RTL8019_PAGE2DMAWRITE 0x92
+#define RTL8019_REMOTEDMAWR 0x12
+#define RTL8019_REMOTEDMARD 0x0A
+#define RTL8019_ABORTDMAWR 0x32
+#define RTL8019_ABORTDMARD 0x2A
+#define RTL8019_PAGE0STOP 0x21
+#define RTL8019_PAGE1STOP 0x61
+#define RTL8019_TRANSMIT 0x26
+#define RTL8019_TXINPROGRESS 0x04
+#define RTL8019_SEND 0x1A
+#define RTL8019_PSTART 0x4c
+#define RTL8019_PSTOP 0x80
+#define RTL8019_TPSTART 0x40
#endif /*end of CONFIG_DRIVER_RTL8019*/
diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h
index cf5b5ad..5feda92 100644
--- a/drivers/net/sk98lin/h/skdebug.h
+++ b/drivers/net/sk98lin/h/skdebug.h
@@ -73,8 +73,8 @@
#ifdef DEBUG
#ifndef SK_DBG_MSG
#define SK_DBG_MSG(pAC,comp,cat,arg) \
- if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \
- ((cat) & SK_DBG_CHKCAT(pAC)) ) { \
+ if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \
+ ((cat) & SK_DBG_CHKCAT(pAC)) ) { \
SK_DBG_PRINTF arg ; \
}
#endif
diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
index a311827..a55005f 100644
--- a/drivers/net/sk98lin/h/skdrv2nd.h
+++ b/drivers/net/sk98lin/h/skdrv2nd.h
@@ -283,7 +283,7 @@ struct s_TxD {
/* definition of flags in descriptor control field */
-#define RX_CTRL_OWN_BMU UINT32_C(0x80000000)
+#define RX_CTRL_OWN_BMU UINT32_C(0x80000000)
#define RX_CTRL_STF UINT32_C(0x40000000)
#define RX_CTRL_EOF UINT32_C(0x20000000)
#define RX_CTRL_EOB_IRQ UINT32_C(0x10000000)
@@ -295,7 +295,7 @@ struct s_TxD {
#define RX_CTRL_CHECK_CSUM UINT32_C(0x00560000)
#define RX_CTRL_LEN_MASK UINT32_C(0x0000FFFF)
-#define TX_CTRL_OWN_BMU UINT32_C(0x80000000)
+#define TX_CTRL_OWN_BMU UINT32_C(0x80000000)
#define TX_CTRL_STF UINT32_C(0x40000000)
#define TX_CTRL_EOF UINT32_C(0x20000000)
#define TX_CTRL_EOB_IRQ UINT32_C(0x10000000)
diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h
index 72ba9ce..9810b39 100644
--- a/drivers/net/sk98lin/h/skgedrv.h
+++ b/drivers/net/sk98lin/h/skgedrv.h
@@ -58,15 +58,15 @@
* Usually the events are defined by the destination module.
* In case of the driver we put the definition of the events here.
*/
-#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */
-#define SK_DRV_NET_UP 2 /* The net is operational */
-#define SK_DRV_NET_DOWN 3 /* The net is down */
-#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */
-#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */
-#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */
-#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */
-#define SK_DRV_PORT_FAIL 8 /* One port fails */
+#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */
+#define SK_DRV_NET_UP 2 /* The net is operational */
+#define SK_DRV_NET_DOWN 3 /* The net is down */
+#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */
+#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */
+#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */
+#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */
+#define SK_DRV_PORT_FAIL 8 /* One port fails */
#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */
-#define SK_DRV_POWER_DOWN 10 /* Power down mode */
+#define SK_DRV_POWER_DOWN 10 /* Power down mode */
#endif /* __INC_SKGEDRV_H_ */
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
index 2c98427..52dc83f 100644
--- a/drivers/net/sk98lin/h/skgehw.h
+++ b/drivers/net/sk98lin/h/skgehw.h
@@ -110,10 +110,10 @@
*
* Revision 1.29 1999/01/26 08:55:48 malthoff
* Bugfix: The 16 bit field relations inside the descriptor are
- * endianess dependend if the descriptor reversal feature
- * (PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled.
- * Drivers which use this feature has to set the define
- * SK_USE_REV_DESC.
+ * endianess dependend if the descriptor reversal feature
+ * (PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled.
+ * Drivers which use this feature has to set the define
+ * SK_USE_REV_DESC.
*
* Revision 1.28 1998/12/10 11:10:22 malthoff
* bug fix: IS_IRQ_STAT and IS_IRQ_MST_ERR has been twisted.
@@ -274,7 +274,7 @@ extern "C" {
#define BIT_10S (1 << 10)
#define BIT_9S (1 << 9)
#define BIT_8S (1 << 8)
-#define BIT_7S (1 << 7)
+#define BIT_7S (1 << 7)
#define BIT_6S (1 << 6)
#define BIT_5S (1 << 5)
#define BIT_4S (1 << 4)
@@ -340,27 +340,27 @@ extern "C" {
#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */
#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */
#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */
-#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */
+#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */
/* Byte 35..3b: reserved */
#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */
#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */
#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */
#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */
/* Device Dependent Region */
-#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */
-#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */
+#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */
+#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */
/* Power Management Region */
-#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */
-#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */
-#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */
-#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */
+#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */
+#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */
+#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */
+#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */
/* Byte 0x4e: reserved */
-#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */
+#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */
/* VPD Region */
-#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */
-#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */
-#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */
-#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */
+#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */
+#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */
+#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */
+#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */
/* Byte 0x58..0xff: reserved */
/*
@@ -530,7 +530,7 @@ extern "C" {
#define PCI_PM_STATE_D0 0 /* D0: Operational (default) */
#define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */
#define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */
-#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */
+#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */
/* VPD Region */
/* PCI_VPD_ADR_REG 16 bit VPD Address Register */
@@ -602,7 +602,7 @@ extern "C" {
#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */
#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */
#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */
-#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */
+#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */
/* Eprom registers are currently of no use */
#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */
#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */
@@ -623,7 +623,7 @@ extern "C" {
#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */
#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */
#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */
-#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */
+#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */
#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */
/* 0x0154 - 0x0157: reserved */
#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */
@@ -805,7 +805,7 @@ extern "C" {
* use MR_ADDR() to access
*/
#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */
-#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */
+#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */
/* 0x0c08 - 0x0c0b: reserved */
#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */
#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */
@@ -837,13 +837,13 @@ extern "C" {
#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */
#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */
/* 0x0c54 - 0x0c5f: reserved */
-#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */
+#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */
/* 0x0c64 - 0x0c67: reserved */
-#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */
+#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */
/* 0x0c6c - 0x0c6f: reserved */
-#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */
+#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */
/* 0x0c74 - 0x0c77: reserved */
-#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */
+#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */
/* 0x0c7c - 0x0c7f: reserved */
/*
@@ -860,7 +860,7 @@ extern "C" {
* use MR_ADDR() to access
*/
#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */
-#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */
+#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */
#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */
#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */
#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */
@@ -883,13 +883,13 @@ extern "C" {
#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */
/* 0x0d4c - 0x0d5f: reserved */
-#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */
-#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */
-#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */
+#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */
+#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */
+#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */
/* 0x0d6c - 0x0d6f: reserved */
-#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */
-#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */
-#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */
+#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */
+#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */
+#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */
/* 0x0d7c - 0x0d7f: reserved */
/*
@@ -1039,8 +1039,8 @@ extern "C" {
/* B0_ISRC 32 bit Interrupt Source Register */
/* B0_IMSK 32 bit Interrupt Mask Register */
/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */
-/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
-#define IS_ALL_MSK 0xbfffffffL /* All Interrupt bits */
+/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
+#define IS_ALL_MSK 0xbfffffffL /* All Interrupt bits */
#define IS_HW_ERR BIT_31 /* Interrupt HW Error */
/* Bit 30: reserved */
#define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */
@@ -1085,7 +1085,7 @@ extern "C" {
/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */
/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */
/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
-#define IS_ERR_MSK 0x00000fffL /* All Error bits */
+#define IS_ERR_MSK 0x00000fffL /* All Error bits */
/* Bit 31..14: reserved */
#define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */
#define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */
@@ -1112,7 +1112,7 @@ extern "C" {
#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */
#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/
-/* B2_CHIP_ID 8 bit Chip Identification Number */
+/* B2_CHIP_ID 8 bit Chip Identification Number */
#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */
#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */
@@ -1157,7 +1157,7 @@ extern "C" {
#define DPT_START BIT_1S /* Start Descriptor Poll Timer */
#define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */
-/* B2_E_3 8 bit lower 4 bits used for HW self test result */
+/* B2_E_3 8 bit lower 4 bits used for HW self test result */
#define B2_E3_RES_MASK 0x0f
/* B2_TST_CTRL1 8 bit Test Control Register 1 */
@@ -1210,7 +1210,7 @@ extern "C" {
#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */
#define I2C_DEV_SIZE (7L<<1) /* Bit 3.. 1: I2C Device Size */
#define I2C_025K_DEV (0L<<1) /* 0: 256 Bytes or smal. */
-#define I2C_05K_DEV (1L<<1) /* 1: 512 Bytes */
+#define I2C_05K_DEV (1L<<1) /* 1: 512 Bytes */
#define I2C_1K_DEV (2L<<1) /* 2: 1024 Bytes */
#define I2C_2K_DEV (3L<<1) /* 3: 2048 Bytes */
#define I2C_4K_DEV (4L<<1) /* 4: 4096 Bytes */
@@ -1417,7 +1417,7 @@ extern "C" {
#define F_WM_REACHED BIT_25 /* Watermark reached */
/* reserved */
#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */
- /* Bit 15..11: reserved */
+ /* Bit 15..11: reserved */
#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */
/* Q_T1 32 bit Test Register 1 */
@@ -1501,12 +1501,12 @@ extern "C" {
/* Receive and Transmit MAC FIFO Registers (GENESIS only) */
/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */
-/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */
+/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */
/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */
/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */
/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */
/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */
-/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */
+/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */
/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */
/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */
/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */
@@ -1553,8 +1553,8 @@ extern "C" {
#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
-/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */
-/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */
+/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */
+/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */
/* Bit 7: reserved */
#define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */
#define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */
@@ -1564,8 +1564,8 @@ extern "C" {
#define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */
#define MFF_PC_INC BIT_0S /* Packet Counter Increment */
-/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */
-/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */
+/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */
+/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */
/* Bit 7: reserved */
#define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */
#define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */
@@ -1593,7 +1593,7 @@ extern "C" {
#define LED_START BIT_2S /* Start Timer */
#define LED_STOP BIT_1S /* Stop Timer */
#define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */
-#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */
+#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */
/* RX_LED_TST 8 bit Receive LED Cnt Test Register */
/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */
@@ -1603,7 +1603,7 @@ extern "C" {
#define LED_T_OFF BIT_1S /* LED Counter Test mode Off */
#define LED_T_STEP BIT_0S /* LED Counter Step */
-/* LNK_LED_REG 8 bit Link LED Register */
+/* LNK_LED_REG 8 bit Link LED Register */
/* Bit 7.. 6: reserved */
#define LED_BLK_ON BIT_5S /* Link LED Blinking On */
#define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */
@@ -1616,18 +1616,18 @@ extern "C" {
/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */
/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */
-/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */
-/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */
-/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */
-/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */
+/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */
+/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */
+/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */
+/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */
/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */
/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
-/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */
-/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */
-/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */
-/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */
-/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */
-/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */
+/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */
+/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */
+/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */
+/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */
+/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */
+/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */
/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
/* Bits 31..15: reserved */
@@ -2211,11 +2211,11 @@ typedef struct s_HwRxd {
* PHY_WRITE() write a 16 bit value to the PHY
*
* para:
- * IoC I/O context needed for SK I/O macros
- * pPort Pointer to port struct for PhyAddr
- * Mac XMAC to access values: MAC_1 or MAC_2
- * PhyReg PHY Register to read or write
- * (p)Val Value or pointer to the value which should be read or
+ * IoC I/O context needed for SK I/O macros
+ * pPort Pointer to port struct for PhyAddr
+ * Mac XMAC to access values: MAC_1 or MAC_2
+ * PhyReg PHY Register to read or write
+ * (p)Val Value or pointer to the value which should be read or
* written.
*
* usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value);
@@ -2224,26 +2224,26 @@ typedef struct s_HwRxd {
*/
#ifndef DEBUG
#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
- SK_U16 Mmu; \
+ SK_U16 Mmu; \
\
XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
if ((pPort)->PhyType != SK_PHY_XMAC) { \
- do { \
+ do { \
XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
} while ((Mmu & XM_MMU_PHY_RDY) == 0); \
XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
- } \
+ } \
}
#else
#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
- SK_U16 Mmu; \
+ SK_U16 Mmu; \
int __i = 0; \
\
XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
if ((pPort)->PhyType != SK_PHY_XMAC) { \
- do { \
+ do { \
XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
__i++; \
if (__i > 100000) { \
@@ -2254,7 +2254,7 @@ typedef struct s_HwRxd {
} \
} while ((Mmu & XM_MMU_PHY_RDY) == 0); \
XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
- } \
+ } \
}
#endif /* DEBUG */
@@ -2262,17 +2262,17 @@ typedef struct s_HwRxd {
SK_U16 Mmu; \
\
if ((pPort)->PhyType != SK_PHY_XMAC) { \
- do { \
+ do { \
XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
} while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
- } \
+ } \
XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \
if ((pPort)->PhyType != SK_PHY_XMAC) { \
- do { \
+ do { \
XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
} while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
- } \
+ } \
}
/*
diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h
index e639f73..78c25f8 100644
--- a/drivers/net/sk98lin/h/skgei2c.h
+++ b/drivers/net/sk98lin/h/skgei2c.h
@@ -186,7 +186,7 @@
* To watch the statemachine (JS) use the timer in two ways instead of one as hitherto
*/
#define SK_TIMER_WATCH_STATEMACHINE 0 /* Watch the statemachine to finish in a specific time */
-#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */
+#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */
/*
@@ -200,7 +200,7 @@
#define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */
/* VCC which should be 5 V */
-#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */
+#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */
#define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */
#define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */
#define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */
@@ -270,10 +270,10 @@
/*
* ASIC Core 1V5 voltage (YUKON only)
*/
-#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */
+#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */
#define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */
#define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */
-#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */
+#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */
/*
* FAN 1 speed
@@ -285,7 +285,7 @@
*/
#define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */
#define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */
-#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */
+#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */
#define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */
/*
diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
index cdddef9..ef101d7 100644
--- a/drivers/net/sk98lin/h/skgeinit.h
+++ b/drivers/net/sk98lin/h/skgeinit.h
@@ -486,7 +486,7 @@ extern "C" {
/* Link Speed Current State */
#define SK_LSPEED_STAT_UNKNOWN 1
#define SK_LSPEED_STAT_10MBPS 2
-#define SK_LSPEED_STAT_100MBPS 3
+#define SK_LSPEED_STAT_100MBPS 3
#define SK_LSPEED_STAT_1000MBPS 4
#define SK_LSPEED_STAT_INDETERMINATED 5
diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h
index 5c44f47..e812f28 100644
--- a/drivers/net/sk98lin/h/skgepnm2.h
+++ b/drivers/net/sk98lin/h/skgepnm2.h
@@ -248,7 +248,7 @@ typedef struct s_OidTabEntry {
enum SK_MACSTATS {
SK_PNMI_HTX = 0,
SK_PNMI_HTX_OCTET,
- SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET,
+ SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET,
SK_PNMI_HTX_OCTETLOW,
SK_PNMI_HTX_BROADCAST,
SK_PNMI_HTX_MULTICAST,
diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h
index 7532313..c93e99c 100644
--- a/drivers/net/sk98lin/h/skgepnmi.h
+++ b/drivers/net/sk98lin/h/skgepnmi.h
@@ -67,7 +67,7 @@
* Changed macro PHYS2INST. Added pAC to Interface
*
* Revision 1.47 2001/02/07 08:28:23 mkunz
- * - Added Oids: OID_SKGE_DIAG_ACTION
+ * - Added Oids: OID_SKGE_DIAG_ACTION
* OID_SKGE_DIAG_RESULT
* OID_SKGE_MULTICAST_LIST
* OID_SKGE_CURRENT_PACKET_FILTER
@@ -253,22 +253,22 @@
/*
* Event definitions
*/
-#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */
-#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */
-#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */
-#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */
-#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */
-#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */
+#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */
+#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */
+#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */
+#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */
+#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */
+#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */
#define SK_PNMI_EVT_UTILIZATION_TIMER 7 /* Timer event for Utiliza. */
-#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */
-#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */
+#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */
+#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */
-#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */
-#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */
+#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */
+#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */
#define SK_PNMI_EVT_RLMT_SEGMENTATION 13 /* Two SP root bridges found */
#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN 14 /* Port went logically down */
-#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */
-#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets
+#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */
+#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets
1 = single net; 2 = dual net */
#define SK_PNMI_EVT_VCT_RESET 17 /* VCT port reset timer event started with SET. */
@@ -276,14 +276,14 @@
/*
* Return values
*/
-#define SK_PNMI_ERR_OK 0
-#define SK_PNMI_ERR_GENERAL 1
+#define SK_PNMI_ERR_OK 0
+#define SK_PNMI_ERR_GENERAL 1
#define SK_PNMI_ERR_TOO_SHORT 2
#define SK_PNMI_ERR_BAD_VALUE 3
#define SK_PNMI_ERR_READ_ONLY 4
#define SK_PNMI_ERR_UNKNOWN_OID 5
#define SK_PNMI_ERR_UNKNOWN_INST 6
-#define SK_PNMI_ERR_UNKNOWN_NET 7
+#define SK_PNMI_ERR_UNKNOWN_NET 7
/*
@@ -329,11 +329,11 @@
*/
#ifndef _NDIS_ /* Check, whether NDIS already included OIDs */
-#define OID_GEN_XMIT_OK 0x00020101
-#define OID_GEN_RCV_OK 0x00020102
-#define OID_GEN_XMIT_ERROR 0x00020103
-#define OID_GEN_RCV_ERROR 0x00020104
-#define OID_GEN_RCV_NO_BUFFER 0x00020105
+#define OID_GEN_XMIT_OK 0x00020101
+#define OID_GEN_RCV_OK 0x00020102
+#define OID_GEN_XMIT_ERROR 0x00020103
+#define OID_GEN_RCV_ERROR 0x00020104
+#define OID_GEN_RCV_NO_BUFFER 0x00020105
/* #define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 */
#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202
@@ -342,27 +342,27 @@
/* #define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 */
#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206
/* #define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 */
-#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208
+#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208
/* #define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 */
#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A
/* #define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B */
#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C
-#define OID_GEN_RCV_CRC_ERROR 0x0002020D
+#define OID_GEN_RCV_CRC_ERROR 0x0002020D
#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E
-#define OID_802_3_PERMANENT_ADDRESS 0x01010101
-#define OID_802_3_CURRENT_ADDRESS 0x01010102
-/* #define OID_802_3_MULTICAST_LIST 0x01010103 */
+#define OID_802_3_PERMANENT_ADDRESS 0x01010101
+#define OID_802_3_CURRENT_ADDRESS 0x01010102
+/* #define OID_802_3_MULTICAST_LIST 0x01010103 */
/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */
-/* #define OID_802_3_MAC_OPTIONS 0x01010105 */
+/* #define OID_802_3_MAC_OPTIONS 0x01010105 */
#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101
#define OID_802_3_XMIT_ONE_COLLISION 0x01020102
#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103
-#define OID_802_3_XMIT_DEFERRED 0x01020201
+#define OID_802_3_XMIT_DEFERRED 0x01020201
#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202
-#define OID_802_3_RCV_OVERRUN 0x01020203
-#define OID_802_3_XMIT_UNDERRUN 0x01020204
+#define OID_802_3_RCV_OVERRUN 0x01020203
+#define OID_802_3_XMIT_UNDERRUN 0x01020204
#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206
#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207
@@ -370,193 +370,193 @@
* PnP and PM OIDs
*/
#ifdef SK_POWER_MGMT
-#define OID_PNP_CAPABILITIES 0xFD010100
-#define OID_PNP_SET_POWER 0xFD010101
-#define OID_PNP_QUERY_POWER 0xFD010102
-#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103
+#define OID_PNP_CAPABILITIES 0xFD010100
+#define OID_PNP_SET_POWER 0xFD010101
+#define OID_PNP_QUERY_POWER 0xFD010102
+#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103
#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104
-#define OID_PNP_ENABLE_WAKE_UP 0xFD010106
+#define OID_PNP_ENABLE_WAKE_UP 0xFD010106
#endif /* SK_POWER_MGMT */
#endif /* _NDIS_ */
-#define OID_SKGE_MDB_VERSION 0xFF010100
-#define OID_SKGE_SUPPORTED_LIST 0xFF010101
-#define OID_SKGE_VPD_FREE_BYTES 0xFF010102
-#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103
-#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104
-#define OID_SKGE_VPD_KEY 0xFF010105
-#define OID_SKGE_VPD_VALUE 0xFF010106
-#define OID_SKGE_VPD_ACCESS 0xFF010107
-#define OID_SKGE_VPD_ACTION 0xFF010108
-
-#define OID_SKGE_PORT_NUMBER 0xFF010110
-#define OID_SKGE_DEVICE_TYPE 0xFF010111
-#define OID_SKGE_DRIVER_DESCR 0xFF010112
-#define OID_SKGE_DRIVER_VERSION 0xFF010113
-#define OID_SKGE_HW_DESCR 0xFF010114
-#define OID_SKGE_HW_VERSION 0xFF010115
-#define OID_SKGE_CHIPSET 0xFF010116
-#define OID_SKGE_ACTION 0xFF010117
-#define OID_SKGE_RESULT 0xFF010118
-#define OID_SKGE_BUS_TYPE 0xFF010119
-#define OID_SKGE_BUS_SPEED 0xFF01011A
-#define OID_SKGE_BUS_WIDTH 0xFF01011B
+#define OID_SKGE_MDB_VERSION 0xFF010100
+#define OID_SKGE_SUPPORTED_LIST 0xFF010101
+#define OID_SKGE_VPD_FREE_BYTES 0xFF010102
+#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103
+#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104
+#define OID_SKGE_VPD_KEY 0xFF010105
+#define OID_SKGE_VPD_VALUE 0xFF010106
+#define OID_SKGE_VPD_ACCESS 0xFF010107
+#define OID_SKGE_VPD_ACTION 0xFF010108
+
+#define OID_SKGE_PORT_NUMBER 0xFF010110
+#define OID_SKGE_DEVICE_TYPE 0xFF010111
+#define OID_SKGE_DRIVER_DESCR 0xFF010112
+#define OID_SKGE_DRIVER_VERSION 0xFF010113
+#define OID_SKGE_HW_DESCR 0xFF010114
+#define OID_SKGE_HW_VERSION 0xFF010115
+#define OID_SKGE_CHIPSET 0xFF010116
+#define OID_SKGE_ACTION 0xFF010117
+#define OID_SKGE_RESULT 0xFF010118
+#define OID_SKGE_BUS_TYPE 0xFF010119
+#define OID_SKGE_BUS_SPEED 0xFF01011A
+#define OID_SKGE_BUS_WIDTH 0xFF01011B
/* 0xFF01011C unused */
-#define OID_SKGE_DIAG_ACTION 0xFF01011D
-#define OID_SKGE_DIAG_RESULT 0xFF01011E
-#define OID_SKGE_MTU 0xFF01011F
-#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120
-#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121
-#define OID_SKGE_PMD 0xFF010122
-#define OID_SKGE_CONNECTOR 0xFF010123
-#define OID_SKGE_LINK_CAP 0xFF010124
-#define OID_SKGE_LINK_MODE 0xFF010125
-#define OID_SKGE_LINK_MODE_STATUS 0xFF010126
-#define OID_SKGE_LINK_STATUS 0xFF010127
-#define OID_SKGE_FLOWCTRL_CAP 0xFF010128
-#define OID_SKGE_FLOWCTRL_MODE 0xFF010129
-#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A
-#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B
-#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C
+#define OID_SKGE_DIAG_ACTION 0xFF01011D
+#define OID_SKGE_DIAG_RESULT 0xFF01011E
+#define OID_SKGE_MTU 0xFF01011F
+#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120
+#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121
+#define OID_SKGE_PMD 0xFF010122
+#define OID_SKGE_CONNECTOR 0xFF010123
+#define OID_SKGE_LINK_CAP 0xFF010124
+#define OID_SKGE_LINK_MODE 0xFF010125
+#define OID_SKGE_LINK_MODE_STATUS 0xFF010126
+#define OID_SKGE_LINK_STATUS 0xFF010127
+#define OID_SKGE_FLOWCTRL_CAP 0xFF010128
+#define OID_SKGE_FLOWCTRL_MODE 0xFF010129
+#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A
+#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B
+#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C
#define OID_SKGE_PHY_OPERATION_STATUS 0xFF01012D
-#define OID_SKGE_MULTICAST_LIST 0xFF01012E
+#define OID_SKGE_MULTICAST_LIST 0xFF01012E
#define OID_SKGE_CURRENT_PACKET_FILTER 0xFF01012F
-#define OID_SKGE_TRAP 0xFF010130
-#define OID_SKGE_TRAP_NUMBER 0xFF010131
+#define OID_SKGE_TRAP 0xFF010130
+#define OID_SKGE_TRAP_NUMBER 0xFF010131
-#define OID_SKGE_RLMT_MODE 0xFF010140
-#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141
-#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142
+#define OID_SKGE_RLMT_MODE 0xFF010140
+#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141
+#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142
#define OID_SKGE_RLMT_PORT_PREFERRED 0xFF010143
#define OID_SKGE_INTERMEDIATE_SUPPORT 0xFF010160
-#define OID_SKGE_SPEED_CAP 0xFF010170
-#define OID_SKGE_SPEED_MODE 0xFF010171
-#define OID_SKGE_SPEED_STATUS 0xFF010172
+#define OID_SKGE_SPEED_CAP 0xFF010170
+#define OID_SKGE_SPEED_MODE 0xFF010171
+#define OID_SKGE_SPEED_STATUS 0xFF010172
-#define OID_SKGE_SENSOR_NUMBER 0xFF020100
-#define OID_SKGE_SENSOR_INDEX 0xFF020101
-#define OID_SKGE_SENSOR_DESCR 0xFF020102
-#define OID_SKGE_SENSOR_TYPE 0xFF020103
-#define OID_SKGE_SENSOR_VALUE 0xFF020104
+#define OID_SKGE_SENSOR_NUMBER 0xFF020100
+#define OID_SKGE_SENSOR_INDEX 0xFF020101
+#define OID_SKGE_SENSOR_DESCR 0xFF020102
+#define OID_SKGE_SENSOR_TYPE 0xFF020103
+#define OID_SKGE_SENSOR_VALUE 0xFF020104
#define OID_SKGE_SENSOR_WAR_THRES_LOW 0xFF020105
#define OID_SKGE_SENSOR_WAR_THRES_UPP 0xFF020106
#define OID_SKGE_SENSOR_ERR_THRES_LOW 0xFF020107
#define OID_SKGE_SENSOR_ERR_THRES_UPP 0xFF020108
-#define OID_SKGE_SENSOR_STATUS 0xFF020109
-#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A
-#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B
-#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C
-#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D
-
-#define OID_SKGE_CHKSM_NUMBER 0xFF020110
-#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111
+#define OID_SKGE_SENSOR_STATUS 0xFF020109
+#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A
+#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B
+#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C
+#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D
+
+#define OID_SKGE_CHKSM_NUMBER 0xFF020110
+#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111
#define OID_SKGE_CHKSM_RX_UNABLE_CTS 0xFF020112
-#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113
-#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114
+#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113
+#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114
#define OID_SKGE_CHKSM_TX_UNABLE_CTS 0xFF020115
-#define OID_SKGE_STAT_TX 0xFF020120
-#define OID_SKGE_STAT_TX_OCTETS 0xFF020121
-#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122
-#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123
-#define OID_SKGE_STAT_TX_UNICAST 0xFF020124
-#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125
-#define OID_SKGE_STAT_TX_BURST 0xFF020126
-#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127
-#define OID_SKGE_STAT_TX_FLOWC 0xFF020128
-#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129
-#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A
-#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B
-#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C
-#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D
-#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E
-#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F
-#define OID_SKGE_STAT_TX_CARRIER 0xFF020130
-/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */
-#define OID_SKGE_STAT_TX_64 0xFF020132
-#define OID_SKGE_STAT_TX_127 0xFF020133
-#define OID_SKGE_STAT_TX_255 0xFF020134
-#define OID_SKGE_STAT_TX_511 0xFF020135
-#define OID_SKGE_STAT_TX_1023 0xFF020136
-#define OID_SKGE_STAT_TX_MAX 0xFF020137
-#define OID_SKGE_STAT_TX_SYNC 0xFF020138
+#define OID_SKGE_STAT_TX 0xFF020120
+#define OID_SKGE_STAT_TX_OCTETS 0xFF020121
+#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122
+#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123
+#define OID_SKGE_STAT_TX_UNICAST 0xFF020124
+#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125
+#define OID_SKGE_STAT_TX_BURST 0xFF020126
+#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127
+#define OID_SKGE_STAT_TX_FLOWC 0xFF020128
+#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129
+#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A
+#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B
+#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C
+#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D
+#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E
+#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F
+#define OID_SKGE_STAT_TX_CARRIER 0xFF020130
+/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */
+#define OID_SKGE_STAT_TX_64 0xFF020132
+#define OID_SKGE_STAT_TX_127 0xFF020133
+#define OID_SKGE_STAT_TX_255 0xFF020134
+#define OID_SKGE_STAT_TX_511 0xFF020135
+#define OID_SKGE_STAT_TX_1023 0xFF020136
+#define OID_SKGE_STAT_TX_MAX 0xFF020137
+#define OID_SKGE_STAT_TX_SYNC 0xFF020138
#define OID_SKGE_STAT_TX_SYNC_OCTETS 0xFF020139
-#define OID_SKGE_STAT_RX 0xFF02013A
-#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B
-#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C
-#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D
-#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E
-#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F
-#define OID_SKGE_STAT_RX_FLOWC 0xFF020140
-#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141
+#define OID_SKGE_STAT_RX 0xFF02013A
+#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B
+#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C
+#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D
+#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E
+#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F
+#define OID_SKGE_STAT_RX_FLOWC 0xFF020140
+#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141
#define OID_SKGE_STAT_RX_FLOWC_UNKWN 0xFF020142
-#define OID_SKGE_STAT_RX_BURST 0xFF020143
-#define OID_SKGE_STAT_RX_MISSED 0xFF020144
-#define OID_SKGE_STAT_RX_FRAMING 0xFF020145
-#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146
-#define OID_SKGE_STAT_RX_JABBER 0xFF020147
-#define OID_SKGE_STAT_RX_CARRIER 0xFF020148
-#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149
-#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A
-#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B
-#define OID_SKGE_STAT_RX_RUNT 0xFF02014C
-#define OID_SKGE_STAT_RX_CEXT 0xFF02014D
-#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E
-#define OID_SKGE_STAT_RX_FCS 0xFF02014F
-/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */
-#define OID_SKGE_STAT_RX_64 0xFF020151
-#define OID_SKGE_STAT_RX_127 0xFF020152
-#define OID_SKGE_STAT_RX_255 0xFF020153
-#define OID_SKGE_STAT_RX_511 0xFF020154
-#define OID_SKGE_STAT_RX_1023 0xFF020155
-#define OID_SKGE_STAT_RX_MAX 0xFF020156
-#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157
-
-#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160
-#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161
-#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162
-#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163
-
-#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164
-#define OID_SKGE_RLMT_STATUS 0xFF020165
-#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166
-#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167
-#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168
-#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169
+#define OID_SKGE_STAT_RX_BURST 0xFF020143
+#define OID_SKGE_STAT_RX_MISSED 0xFF020144
+#define OID_SKGE_STAT_RX_FRAMING 0xFF020145
+#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146
+#define OID_SKGE_STAT_RX_JABBER 0xFF020147
+#define OID_SKGE_STAT_RX_CARRIER 0xFF020148
+#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149
+#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A
+#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B
+#define OID_SKGE_STAT_RX_RUNT 0xFF02014C
+#define OID_SKGE_STAT_RX_CEXT 0xFF02014D
+#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E
+#define OID_SKGE_STAT_RX_FCS 0xFF02014F
+/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */
+#define OID_SKGE_STAT_RX_64 0xFF020151
+#define OID_SKGE_STAT_RX_127 0xFF020152
+#define OID_SKGE_STAT_RX_255 0xFF020153
+#define OID_SKGE_STAT_RX_511 0xFF020154
+#define OID_SKGE_STAT_RX_1023 0xFF020155
+#define OID_SKGE_STAT_RX_MAX 0xFF020156
+#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157
+
+#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160
+#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161
+#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162
+#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163
+
+#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164
+#define OID_SKGE_RLMT_STATUS 0xFF020165
+#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166
+#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167
+#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168
+#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169
#define OID_SKGE_RLMT_MONITOR_NUMBER 0xFF010150
-#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151
-#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152
-#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153
+#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151
+#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152
+#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153
#define OID_SKGE_RLMT_MONITOR_TIMESTAMP 0xFF010154
-#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155
-
-#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170
-#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171
-#define OID_SKGE_TX_RETRY 0xFF020172
-#define OID_SKGE_RX_INTR_CTS 0xFF020173
-#define OID_SKGE_TX_INTR_CTS 0xFF020174
-#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175
-#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176
-#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177
-#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178
+#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155
+
+#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170
+#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171
+#define OID_SKGE_TX_RETRY 0xFF020172
+#define OID_SKGE_RX_INTR_CTS 0xFF020173
+#define OID_SKGE_TX_INTR_CTS 0xFF020174
+#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175
+#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176
+#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177
+#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178
#define OID_SKGE_RX_OCTETS_DELIV_CTS 0xFF020179
-#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A
-#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B
-#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C
-#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D
-#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E
-#define OID_SKGE_SYSUPTIME 0xFF02017F
+#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A
+#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B
+#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C
+#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D
+#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E
+#define OID_SKGE_SYSUPTIME 0xFF02017F
-#define OID_SKGE_ALL_DATA 0xFF020190
+#define OID_SKGE_ALL_DATA 0xFF020190
/* Defines for VCT. */
-#define OID_SKGE_VCT_GET 0xFF020200
-#define OID_SKGE_VCT_SET 0xFF020201
-#define OID_SKGE_VCT_STATUS 0xFF020202
+#define OID_SKGE_VCT_GET 0xFF020200
+#define OID_SKGE_VCT_SET 0xFF020201
+#define OID_SKGE_VCT_STATUS 0xFF020202
/* VCT struct to store a backup copy of VCT data after a port reset. */
@@ -578,20 +578,20 @@ typedef struct s_PnmiVct {
/* VCT cable test status. */
-#define SK_PNMI_VCT_NORMAL_CABLE 0
-#define SK_PNMI_VCT_SHORT_CABLE 1
-#define SK_PNMI_VCT_OPEN_CABLE 2
-#define SK_PNMI_VCT_TEST_FAIL 3
-#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4
-
-#define OID_SKGE_TRAP_SEN_WAR_LOW 500
-#define OID_SKGE_TRAP_SEN_WAR_UPP 501
-#define OID_SKGE_TRAP_SEN_ERR_LOW 502
-#define OID_SKGE_TRAP_SEN_ERR_UPP 503
+#define SK_PNMI_VCT_NORMAL_CABLE 0
+#define SK_PNMI_VCT_SHORT_CABLE 1
+#define SK_PNMI_VCT_OPEN_CABLE 2
+#define SK_PNMI_VCT_TEST_FAIL 3
+#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4
+
+#define OID_SKGE_TRAP_SEN_WAR_LOW 500
+#define OID_SKGE_TRAP_SEN_WAR_UPP 501
+#define OID_SKGE_TRAP_SEN_ERR_LOW 502
+#define OID_SKGE_TRAP_SEN_ERR_UPP 503
#define OID_SKGE_TRAP_RLMT_CHANGE_THRES 520
#define OID_SKGE_TRAP_RLMT_CHANGE_PORT 521
#define OID_SKGE_TRAP_RLMT_PORT_DOWN 522
-#define OID_SKGE_TRAP_RLMT_PORT_UP 523
+#define OID_SKGE_TRAP_RLMT_PORT_UP 523
#define OID_SKGE_TRAP_RLMT_SEGMENTATION 524
@@ -775,7 +775,7 @@ typedef struct s_PnmiVct {
/*
* Structure definition for SkPnmiGetStruct and SkPnmiSetStruct
*/
-#define SK_PNMI_VPD_KEY_SIZE 5
+#define SK_PNMI_VPD_KEY_SIZE 5
#define SK_PNMI_VPD_BUFSIZE (VPD_SIZE)
#define SK_PNMI_VPD_ENTRIES (VPD_SIZE / 4)
#define SK_PNMI_VPD_DATALEN 128 /* Number of data bytes */
@@ -783,12 +783,12 @@ typedef struct s_PnmiVct {
#define SK_PNMI_MULTICAST_LISTLEN 64
#define SK_PNMI_SENSOR_ENTRIES (SK_MAX_SENSORS)
#define SK_PNMI_CHECKSUM_ENTRIES 3
-#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1)
+#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1)
#define SK_PNMI_MONITOR_ENTRIES 20
#define SK_PNMI_TRAP_ENTRIES 10
-#define SK_PNMI_TRAPLEN 128
-#define SK_PNMI_STRINGLEN1 80
-#define SK_PNMI_STRINGLEN2 25
+#define SK_PNMI_TRAPLEN 128
+#define SK_PNMI_STRINGLEN1 80
+#define SK_PNMI_STRINGLEN2 25
#define SK_PNMI_TRAP_QUEUE_LEN 512
typedef struct s_PnmiVpd {
@@ -992,12 +992,12 @@ typedef struct s_PnmiStrucData {
/*
* Various definitions
*/
-#define SK_PNMI_MAX_PROTOS 3
+#define SK_PNMI_MAX_PROTOS 3
-#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum
- * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK
- * for check while init phase 1
- */
+#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum
+ * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK
+ * for check while init phase 1
+ */
/*
* Estimate data structure
@@ -1091,7 +1091,6 @@ typedef struct s_PnmiData {
SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS];
} SK_PNMI;
-
/*
* Function prototypes
*/
diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
index 1be34c5..3159e27 100644
--- a/drivers/net/sk98lin/h/skvpd.h
+++ b/drivers/net/sk98lin/h/skvpd.h
@@ -126,7 +126,7 @@
* Define READ and WRITE Constants.
*/
-#define VPD_DEV_ID_GENESIS 0x4300
+#define VPD_DEV_ID_GENESIS 0x4300
#define VPD_SIZE_YUKON 256
#define VPD_SIZE_GENESIS 512
@@ -223,19 +223,19 @@ typedef struct s_vpd_key {
if ((pAC)->DgT.DgUseCfgCycle) \
SkPciWriteCfgDWord(pAC,Addr,Val); \
else \
- SK_OUT32(pAC,PCI_C(Addr),Val); \
+ SK_OUT32(pAC,PCI_C(Addr),Val); \
}
#define VPD_IN8(pAC,Ioc,Addr,pVal) { \
- if ((pAC)->DgT.DgUseCfgCycle) \
+ if ((pAC)->DgT.DgUseCfgCycle) \
SkPciReadCfgByte(pAC,Addr,pVal); \
else \
- SK_IN8(pAC,PCI_C(Addr),pVal); \
+ SK_IN8(pAC,PCI_C(Addr),pVal); \
}
#define VPD_IN16(pAC,Ioc,Addr,pVal) { \
- if ((pAC)->DgT.DgUseCfgCycle) \
+ if ((pAC)->DgT.DgUseCfgCycle) \
SkPciReadCfgWord(pAC,Addr,pVal); \
else \
- SK_IN16(pAC,PCI_C(Addr),pVal); \
+ SK_IN16(pAC,PCI_C(Addr),pVal); \
}
#define VPD_IN32(pAC,Ioc,Addr,pVal) { \
if ((pAC)->DgT.DgUseCfgCycle) \
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
index 2ef903a..09e21d6 100644
--- a/drivers/net/sk98lin/h/xmac_ii.h
+++ b/drivers/net/sk98lin/h/xmac_ii.h
@@ -237,7 +237,7 @@ extern "C" {
#define XM_RX_CMD 0x0030 /* 16 bit r/w Receive Command Register */
#define XM_PHY_ADDR 0x0034 /* 16 bit r/w PHY Address Register */
#define XM_PHY_DATA 0x0038 /* 16 bit r/w PHY Data Register */
- /* 0x003c: reserved */
+ /* 0x003c: reserved */
#define XM_GP_PORT 0x0040 /* 32 bit r/w General Purpose Port Register */
#define XM_IMSK 0x0044 /* 16 bit r/w Interrupt Mask Register */
#define XM_ISRC 0x0048 /* 16 bit r/o Interrupt Status Register */
@@ -248,14 +248,14 @@ extern "C" {
#define XM_TX_THR 0x0064 /* 16 bit r/w Tx Request Threshold */
#define XM_HT_THR 0x0066 /* 16 bit r/w Host Request Threshold */
#define XM_PAUSE_DA 0x0068 /* NA reg r/w Pause Destination Address */
- /* 0x006e: reserved */
+ /* 0x006e: reserved */
#define XM_CTL_PARA 0x0070 /* 32 bit r/w Control Parameter Register */
#define XM_MAC_OPCODE 0x0074 /* 16 bit r/w Opcode for MAC control frames */
#define XM_MAC_PTIME 0x0076 /* 16 bit r/w Pause time for MAC ctrl frames*/
#define XM_TX_STAT 0x0078 /* 32 bit r/o Tx Status LIFO Register */
/* 0x0080 - 0x00fc: 16 NA reg r/w Exact Match Address Registers */
- /* use the XM_EXM() macro to address */
+ /* use the XM_EXM() macro to address */
#define XM_EXM_START 0x0080 /* r/w Start Address of the EXM Regs */
/*
@@ -413,7 +413,7 @@ extern "C" {
#define XM_RX_IPG_CAP (1<<6) /* Bit 6 repl. type field with IPG */
#define XM_RX_TP_MD (1<<5) /* Bit 5: Enable transparent Mode */
#define XM_RX_STRIP_FCS (1<<4) /* Bit 4: Enable FCS Stripping */
-#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */
+#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */
#define XM_RX_SAM_LINE (1<<2) /* Bit 2: (sc) Start utilization calculation */
#define XM_RX_STRIP_PAD (1<<1) /* Bit 1: Strip pad bytes of Rx frames */
#define XM_RX_DIS_CEXT (1<<0) /* Bit 0: Disable carrier ext. check */
@@ -510,7 +510,7 @@ extern "C" {
/* Bit 31..27: reserved */
#define XM_MD_ENA_REJ (1L<<26) /* Bit 26: Enable Frame Reject */
#define XM_MD_SPOE_E (1L<<25) /* Bit 25: Send Pause on Edge */
- /* extern generated */
+ /* extern generated */
#define XM_MD_TX_REP (1L<<24) /* Bit 24: Transmit Repeater Mode */
#define XM_MD_SPOFF_I (1L<<23) /* Bit 23: Send Pause on FIFO full */
/* intern generated */
@@ -548,7 +548,7 @@ extern "C" {
/* Bit 16..6: reserved */
#define XM_SC_SNP_RXC (1<<5) /* Bit 5: (sc) Snap Rx Counters */
#define XM_SC_SNP_TXC (1<<4) /* Bit 4: (sc) Snap Tx Counters */
-#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */
+#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */
#define XM_SC_CP_TXC (1<<2) /* Bit 2: Copy Tx Counters Continuously */
#define XM_SC_CLR_RXC (1<<1) /* Bit 1: (sc) Clear Rx Counters */
#define XM_SC_CLR_TXC (1<<0) /* Bit 0: (sc) Clear Tx Counters */
@@ -1316,7 +1316,7 @@ extern "C" {
#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */
#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x)
-#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */
+#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */
#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */
#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 61a6094..e1d7e87 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -3,7 +3,7 @@
* Name: skge.c
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.46 $
- * Date: $Date: 2003/02/25 14:16:36 $
+ * Date: $Date: 2003/02/25 14:16:36 $
* Purpose: The main driver source module
*
******************************************************************************/
@@ -348,7 +348,7 @@
#if 0
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
+#include <linux/proc_fs.h>
#endif
#include "h/skdrv1st.h"
#include "h/skdrv2nd.h"
@@ -501,7 +501,7 @@ static struct pci_device_id supported[] = {
/*****************************************************************************
*
- * skge_probe - find all SK-98xx adapters
+ * skge_probe - find all SK-98xx adapters
*
* Description:
* This function scans the PCI bus for SK-98xx adapters. Resources for
@@ -646,7 +646,7 @@ int skge_probe (struct eth_device ** ret_dev)
dev->set_mac_address = &SkGeSetMacAddr;
dev->do_ioctl = &SkGeIoctl;
dev->change_mtu = &SkGeChangeMtu;
- dev->flags &= ~IFF_RUNNING;
+ dev->flags &= ~IFF_RUNNING;
#endif
#ifdef SK_ZEROCOPY
@@ -793,7 +793,7 @@ int skge_probe (struct eth_device ** ret_dev)
dev->set_mac_address = &SkGeSetMacAddr;
dev->do_ioctl = &SkGeIoctl;
dev->change_mtu = &SkGeChangeMtu;
- dev->flags &= ~IFF_RUNNING;
+ dev->flags &= ~IFF_RUNNING;
#endif
#ifdef SK_ZEROCOPY
@@ -857,7 +857,7 @@ int skge_probe (struct eth_device ** ret_dev)
/*****************************************************************************
*
- * FreeResources - release resources allocated for adapter
+ * FreeResources - release resources allocated for adapter
*
* Description:
* This function releases the IRQ, unmaps the IO and
@@ -992,7 +992,7 @@ static int options[SK_MAX_CARD_PARAM] = {0, }; /* not used */
/*****************************************************************************
*
- * skge_init_module - module initialization function
+ * skge_init_module - module initialization function
*
* Description:
* Very simple, only call skge_probe and return approriate result.
@@ -1020,7 +1020,7 @@ static int __init skge_init_module(void)
/*****************************************************************************
*
- * skge_cleanup_module - module unload function
+ * skge_cleanup_module - module unload function
*
* Description:
* Disable adapter if it is still running, free resources,
@@ -1098,7 +1098,7 @@ module_exit(skge_cleanup_module);
/*****************************************************************************
*
- * SkGeBoardInit - do level 0 and 1 initialization
+ * SkGeBoardInit - do level 0 and 1 initialization
*
* Description:
* This function prepares the board hardware for running. The desriptor
@@ -1262,7 +1262,7 @@ SK_BOOL DualNet;
/*****************************************************************************
*
- * BoardAllocMem - allocate the memory for the descriptor rings
+ * BoardAllocMem - allocate the memory for the descriptor rings
*
* Description:
* This function allocates the memory for all descriptor rings.
@@ -1360,7 +1360,7 @@ size_t AllocLength; /* length of complete descriptor area */
/*****************************************************************************
*
- * BoardInitMem - initiate the descriptor rings
+ * BoardInitMem - initiate the descriptor rings
*
* Description:
* This function sets the descriptor rings up in memory.
@@ -1408,7 +1408,7 @@ int TxDescrSize; /* the size of a tx descriptor rounded up to alignment*/
/*****************************************************************************
*
- * SetupRing - create one descriptor ring
+ * SetupRing - create one descriptor ring
*
* Description:
* This function creates one descriptor ring in the given memory area.
@@ -1477,7 +1477,7 @@ uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */
/*****************************************************************************
*
- * PortReInitBmu - re-initiate the descriptor rings for one port
+ * PortReInitBmu - re-initiate the descriptor rings for one port
*
* Description:
* This function reinitializes the descriptor rings of one port
@@ -1998,7 +1998,7 @@ struct SK_NET_DEVICE *dev)
/*****************************************************************************
*
- * SkGeXmit - Linux frame transmit function
+ * SkGeXmit - Linux frame transmit function
*
* Description:
* The system calls this function to send frames onto the wire.
@@ -2078,7 +2078,7 @@ int Rc; /* return code of XmitFrame */
/*****************************************************************************
*
- * XmitFrame - fill one socket buffer into the transmit ring
+ * XmitFrame - fill one socket buffer into the transmit ring
*
* Description:
* This function puts a message into the transmit descriptor ring
@@ -2099,7 +2099,7 @@ int Rc; /* return code of XmitFrame */
* < 0 - on failure: other problems ( -> return failure to upper layers)
*/
static int XmitFrame(
-SK_AC *pAC, /* pointer to adapter context */
+SK_AC *pAC, /* pointer to adapter context */
TX_PORT *pTxPort, /* pointer to struct of port to send to */
struct sk_buff *pMessage) /* pointer to send-message */
{
@@ -2186,7 +2186,7 @@ int BytesSend;
/*****************************************************************************
*
- * XmitFrameSG - fill one socket buffer into the transmit ring
+ * XmitFrameSG - fill one socket buffer into the transmit ring
* (use SG and TCP/UDP hardware checksumming)
*
* Description:
@@ -2201,12 +2201,12 @@ int BytesSend;
*/
#if 0
static int XmitFrameSG(
-SK_AC *pAC, /* pointer to adapter context */
+SK_AC *pAC, /* pointer to adapter context */
TX_PORT *pTxPort, /* pointer to struct of port to send to */
struct sk_buff *pMessage) /* pointer to send-message */
{
- int i;
+ int i;
int BytesSend;
int hlength;
int protocol;
@@ -2374,7 +2374,7 @@ void dump_frag( SK_U8 *data, int length)
/*****************************************************************************
*
- * FreeTxDescriptors - release descriptors from the descriptor ring
+ * FreeTxDescriptors - release descriptors from the descriptor ring
*
* Description:
* This function releases descriptors from a transmit ring if they
@@ -2444,7 +2444,7 @@ SK_U64 PhysAddr; /* address of DMA mapping */
/*****************************************************************************
*
- * FillRxRing - fill the receive ring with valid descriptors
+ * FillRxRing - fill the receive ring with valid descriptors
*
* Description:
* This function fills the receive ring descriptors with data
@@ -2476,7 +2476,7 @@ unsigned long Flags;
/*****************************************************************************
*
- * FillRxDescriptor - fill one buffer into the receive ring
+ * FillRxDescriptor - fill one buffer into the receive ring
*
* Description:
* The function allocates a new receive buffer and
@@ -2532,7 +2532,7 @@ SK_U64 PhysAddr; /* physical address of a rx buffer */
/*****************************************************************************
*
- * ReQueueRxBuffer - fill one buffer back into the receive ring
+ * ReQueueRxBuffer - fill one buffer back into the receive ring
*
* Description:
* Fill a given buffer back into the rx ring. The buffer
@@ -2566,7 +2566,7 @@ SK_U16 Length; /* data fragment length */
/*****************************************************************************
*
- * ReceiveIrq - handle a receive IRQ
+ * ReceiveIrq - handle a receive IRQ
*
* Description:
* This function is called when a receive IRQ is set.
@@ -2598,7 +2598,7 @@ unsigned int NumBytes;
unsigned int ForRlmt;
SK_BOOL IsBc;
SK_BOOL IsMc;
-SK_BOOL IsBadFrame; /* Bad frame */
+SK_BOOL IsBadFrame; /* Bad frame */
SK_U32 FrameStat;
unsigned short Csum1;
@@ -2935,7 +2935,7 @@ rx_failed:
/*****************************************************************************
*
- * ClearAndStartRx - give a start receive command to BMU, clear IRQ
+ * ClearAndStartRx - give a start receive command to BMU, clear IRQ
*
* Description:
* This function sends a start command and a clear interrupt
@@ -2955,7 +2955,7 @@ int PortIndex) /* index of the receive port (XMAC) */
/*****************************************************************************
*
- * ClearTxIrq - give a clear transmit IRQ command to BMU
+ * ClearTxIrq - give a clear transmit IRQ command to BMU
*
* Description:
* This function sends a clear tx IRQ command for one
@@ -2975,7 +2975,7 @@ int Prio) /* priority or normal queue */
/*****************************************************************************
*
- * ClearRxRing - remove all buffers from the receive ring
+ * ClearRxRing - remove all buffers from the receive ring
*
* Description:
* This function removes all receive buffers from the ring.
@@ -3052,7 +3052,7 @@ unsigned long Flags;
#if 0
/*****************************************************************************
*
- * SetQueueSizes - configure the sizes of rx and tx queues
+ * SetQueueSizes - configure the sizes of rx and tx queues
*
* Description:
* This function assigns the sizes for active and passive port
@@ -3145,7 +3145,7 @@ if (pAC->RlmtNets == 1) {
/*****************************************************************************
*
- * SkGeSetMacAddr - Set the hardware MAC address
+ * SkGeSetMacAddr - Set the hardware MAC address
*
* Description:
* This function sets the MAC address used by the adapter.
@@ -3188,7 +3188,7 @@ unsigned long Flags;
/*****************************************************************************
*
- * SkGeSetRxMode - set receive mode
+ * SkGeSetRxMode - set receive mode
*
* Description:
* This function sets the receive mode of an adapter. The adapter
@@ -3264,7 +3264,7 @@ unsigned long Flags;
/*****************************************************************************
*
- * SkGeChangeMtu - set the MTU to another value
+ * SkGeChangeMtu - set the MTU to another value
*
* Description:
* This function sets is called whenever the MTU size is changed
@@ -3282,7 +3282,7 @@ DEV_NET *pOtherNet;
SK_AC *pAC;
unsigned long Flags;
int i;
-SK_EVPARA EvPara;
+SK_EVPARA EvPara;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
("SkGeChangeMtu starts now...\n"));
@@ -3487,7 +3487,7 @@ SK_EVPARA EvPara;
/*****************************************************************************
*
- * SkGeStats - return ethernet device statistics
+ * SkGeStats - return ethernet device statistics
*
* Description:
* This function return statistic data about the ethernet device
@@ -3560,7 +3560,7 @@ unsigned long Flags; /* for spin lock */
/*****************************************************************************
*
- * SkGeIoctl - IO-control function
+ * SkGeIoctl - IO-control function
*
* Description:
* This function is called if an ioctl is issued on the device.
@@ -3619,7 +3619,7 @@ int Size;
/*****************************************************************************
*
- * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message
+ * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message
*
* Description:
* This function reads/writes the MIB data using PNMI (Private Network
@@ -3673,7 +3673,7 @@ SK_AC *pAC;
/*****************************************************************************
*
- * GetConfiguration - read configuration information
+ * GetConfiguration - read configuration information
*
* Description:
* This function reads per-adapter configuration information from
@@ -3717,7 +3717,7 @@ int Capabilities[3][3] =
/* settings for port A */
/* settings link speed */
- LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
+ LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
if (Speed_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
Speed_A[pAC->Index] != NULL) {
if (strcmp(Speed_A[pAC->Index],"")==0) {
@@ -3876,7 +3876,7 @@ int Capabilities[3][3] =
/* settings for port B */
/* settings link speed */
- LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
+ LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */
if (Speed_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
Speed_B[pAC->Index] != NULL) {
if (strcmp(Speed_B[pAC->Index],"")==0) {
@@ -4100,7 +4100,7 @@ int Capabilities[3][3] =
/*****************************************************************************
*
- * ProductStr - return a adapter identification string from vpd
+ * ProductStr - return a adapter identification string from vpd
*
* Description:
* This function reads the product name string from the vpd area
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index a18dc0a..e49685b 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -585,7 +585,7 @@ int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */
* 1: configuration error
*/
static int DoCalcAddr(
-SK_AC *pAC, /* adapter context */
+SK_AC *pAC, /* adapter context */
SK_GEPORT *pPrt, /* port index */
int QuSize, /* size of the queue to configure in kB */
SK_U32 *StartVal, /* start value for address calculation */
@@ -1263,9 +1263,8 @@ int Port) /* Port Index (MAC_1 + n) */
pPrt = &pAC->GIni.GP[Port];
if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) {
- RxQType = SK_RX_SRAM_Q; /* small Rx Queue */
- }
- else {
+ RxQType = SK_RX_SRAM_Q; /* small Rx Queue */
+ } else {
RxQType = SK_RX_BRAM_Q; /* big Rx Queue */
}
@@ -1354,7 +1353,7 @@ int Port) /* Port Index (MAC_1 + n) */
/*
* Tx Queue: Release all local resets if the queue is used !
- * set watermark
+ * set watermark
*/
if (pPrt->PXSQSize != 0) {
SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET);
@@ -1416,7 +1415,7 @@ int QuIoOffs) /* Queue IO Address Offset */
* It is possible to stop the receive and transmit path separate or
* both together.
*
- * Dir = SK_STOP_TX Stops the transmit path only and resets the MAC.
+ * Dir = SK_STOP_TX Stops the transmit path only and resets the MAC.
* The receive queue is still active and
* the pending Rx frames may be still transferred
* into the RxD.
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
index b5d32b0..16fa352 100644
--- a/drivers/net/sk98lin/skgepnmi.c
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -537,70 +537,70 @@ PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32);
* mask returned by the pFnMacOverflow function
*/
PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = {
-/* Bit0 */ { SK_PNMI_HTX, SK_PNMI_HTX_UNICAST},
-/* Bit1 */ { SK_PNMI_HTX_OCTETHIGH, SK_PNMI_HTX_BROADCAST},
-/* Bit2 */ { SK_PNMI_HTX_OCTETLOW, SK_PNMI_HTX_PMACC},
-/* Bit3 */ { SK_PNMI_HTX_BROADCAST, SK_PNMI_HTX_MULTICAST},
-/* Bit4 */ { SK_PNMI_HTX_MULTICAST, SK_PNMI_HTX_OCTETLOW},
-/* Bit5 */ { SK_PNMI_HTX_UNICAST, SK_PNMI_HTX_OCTETHIGH},
-/* Bit6 */ { SK_PNMI_HTX_LONGFRAMES, SK_PNMI_HTX_64},
-/* Bit7 */ { SK_PNMI_HTX_BURST, SK_PNMI_HTX_127},
-/* Bit8 */ { SK_PNMI_HTX_PMACC, SK_PNMI_HTX_255},
-/* Bit9 */ { SK_PNMI_HTX_MACC, SK_PNMI_HTX_511},
-/* Bit10 */ { SK_PNMI_HTX_SINGLE_COL, SK_PNMI_HTX_1023},
-/* Bit11 */ { SK_PNMI_HTX_MULTI_COL, SK_PNMI_HTX_MAX},
-/* Bit12 */ { SK_PNMI_HTX_EXCESS_COL, SK_PNMI_HTX_LONGFRAMES},
-/* Bit13 */ { SK_PNMI_HTX_LATE_COL, SK_PNMI_HTX_RESERVED},
-/* Bit14 */ { SK_PNMI_HTX_DEFFERAL, SK_PNMI_HTX_COL},
-/* Bit15 */ { SK_PNMI_HTX_EXCESS_DEF, SK_PNMI_HTX_LATE_COL},
-/* Bit16 */ { SK_PNMI_HTX_UNDERRUN, SK_PNMI_HTX_EXCESS_COL},
-/* Bit17 */ { SK_PNMI_HTX_CARRIER, SK_PNMI_HTX_MULTI_COL},
-/* Bit18 */ { SK_PNMI_HTX_UTILUNDER, SK_PNMI_HTX_SINGLE_COL},
-/* Bit19 */ { SK_PNMI_HTX_UTILOVER, SK_PNMI_HTX_UNDERRUN},
-/* Bit20 */ { SK_PNMI_HTX_64, SK_PNMI_HTX_RESERVED},
-/* Bit21 */ { SK_PNMI_HTX_127, SK_PNMI_HTX_RESERVED},
-/* Bit22 */ { SK_PNMI_HTX_255, SK_PNMI_HTX_RESERVED},
-/* Bit23 */ { SK_PNMI_HTX_511, SK_PNMI_HTX_RESERVED},
-/* Bit24 */ { SK_PNMI_HTX_1023, SK_PNMI_HTX_RESERVED},
-/* Bit25 */ { SK_PNMI_HTX_MAX, SK_PNMI_HTX_RESERVED},
-/* Bit26 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
-/* Bit27 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
-/* Bit28 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
-/* Bit29 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
-/* Bit30 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
-/* Bit31 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
-/* Bit32 */ { SK_PNMI_HRX, SK_PNMI_HRX_UNICAST},
-/* Bit33 */ { SK_PNMI_HRX_OCTETHIGH, SK_PNMI_HRX_BROADCAST},
-/* Bit34 */ { SK_PNMI_HRX_OCTETLOW, SK_PNMI_HRX_PMACC},
-/* Bit35 */ { SK_PNMI_HRX_BROADCAST, SK_PNMI_HRX_MULTICAST},
-/* Bit36 */ { SK_PNMI_HRX_MULTICAST, SK_PNMI_HRX_FCS},
-/* Bit37 */ { SK_PNMI_HRX_UNICAST, SK_PNMI_HRX_RESERVED},
-/* Bit38 */ { SK_PNMI_HRX_PMACC, SK_PNMI_HRX_OCTETLOW},
-/* Bit39 */ { SK_PNMI_HRX_MACC, SK_PNMI_HRX_OCTETHIGH},
-/* Bit40 */ { SK_PNMI_HRX_PMACC_ERR, SK_PNMI_HRX_BADOCTETLOW},
+/* Bit0 */ { SK_PNMI_HTX, SK_PNMI_HTX_UNICAST},
+/* Bit1 */ { SK_PNMI_HTX_OCTETHIGH, SK_PNMI_HTX_BROADCAST},
+/* Bit2 */ { SK_PNMI_HTX_OCTETLOW, SK_PNMI_HTX_PMACC},
+/* Bit3 */ { SK_PNMI_HTX_BROADCAST, SK_PNMI_HTX_MULTICAST},
+/* Bit4 */ { SK_PNMI_HTX_MULTICAST, SK_PNMI_HTX_OCTETLOW},
+/* Bit5 */ { SK_PNMI_HTX_UNICAST, SK_PNMI_HTX_OCTETHIGH},
+/* Bit6 */ { SK_PNMI_HTX_LONGFRAMES, SK_PNMI_HTX_64},
+/* Bit7 */ { SK_PNMI_HTX_BURST, SK_PNMI_HTX_127},
+/* Bit8 */ { SK_PNMI_HTX_PMACC, SK_PNMI_HTX_255},
+/* Bit9 */ { SK_PNMI_HTX_MACC, SK_PNMI_HTX_511},
+/* Bit10 */ { SK_PNMI_HTX_SINGLE_COL, SK_PNMI_HTX_1023},
+/* Bit11 */ { SK_PNMI_HTX_MULTI_COL, SK_PNMI_HTX_MAX},
+/* Bit12 */ { SK_PNMI_HTX_EXCESS_COL, SK_PNMI_HTX_LONGFRAMES},
+/* Bit13 */ { SK_PNMI_HTX_LATE_COL, SK_PNMI_HTX_RESERVED},
+/* Bit14 */ { SK_PNMI_HTX_DEFFERAL, SK_PNMI_HTX_COL},
+/* Bit15 */ { SK_PNMI_HTX_EXCESS_DEF, SK_PNMI_HTX_LATE_COL},
+/* Bit16 */ { SK_PNMI_HTX_UNDERRUN, SK_PNMI_HTX_EXCESS_COL},
+/* Bit17 */ { SK_PNMI_HTX_CARRIER, SK_PNMI_HTX_MULTI_COL},
+/* Bit18 */ { SK_PNMI_HTX_UTILUNDER, SK_PNMI_HTX_SINGLE_COL},
+/* Bit19 */ { SK_PNMI_HTX_UTILOVER, SK_PNMI_HTX_UNDERRUN},
+/* Bit20 */ { SK_PNMI_HTX_64, SK_PNMI_HTX_RESERVED},
+/* Bit21 */ { SK_PNMI_HTX_127, SK_PNMI_HTX_RESERVED},
+/* Bit22 */ { SK_PNMI_HTX_255, SK_PNMI_HTX_RESERVED},
+/* Bit23 */ { SK_PNMI_HTX_511, SK_PNMI_HTX_RESERVED},
+/* Bit24 */ { SK_PNMI_HTX_1023, SK_PNMI_HTX_RESERVED},
+/* Bit25 */ { SK_PNMI_HTX_MAX, SK_PNMI_HTX_RESERVED},
+/* Bit26 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit27 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit28 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit29 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit30 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit31 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED},
+/* Bit32 */ { SK_PNMI_HRX, SK_PNMI_HRX_UNICAST},
+/* Bit33 */ { SK_PNMI_HRX_OCTETHIGH, SK_PNMI_HRX_BROADCAST},
+/* Bit34 */ { SK_PNMI_HRX_OCTETLOW, SK_PNMI_HRX_PMACC},
+/* Bit35 */ { SK_PNMI_HRX_BROADCAST, SK_PNMI_HRX_MULTICAST},
+/* Bit36 */ { SK_PNMI_HRX_MULTICAST, SK_PNMI_HRX_FCS},
+/* Bit37 */ { SK_PNMI_HRX_UNICAST, SK_PNMI_HRX_RESERVED},
+/* Bit38 */ { SK_PNMI_HRX_PMACC, SK_PNMI_HRX_OCTETLOW},
+/* Bit39 */ { SK_PNMI_HRX_MACC, SK_PNMI_HRX_OCTETHIGH},
+/* Bit40 */ { SK_PNMI_HRX_PMACC_ERR, SK_PNMI_HRX_BADOCTETLOW},
/* Bit41 */ { SK_PNMI_HRX_MACC_UNKWN, SK_PNMI_HRX_BADOCTETHIGH},
-/* Bit42 */ { SK_PNMI_HRX_BURST, SK_PNMI_HRX_UNDERSIZE},
-/* Bit43 */ { SK_PNMI_HRX_MISSED, SK_PNMI_HRX_RUNT},
-/* Bit44 */ { SK_PNMI_HRX_FRAMING, SK_PNMI_HRX_64},
-/* Bit45 */ { SK_PNMI_HRX_OVERFLOW, SK_PNMI_HRX_127},
-/* Bit46 */ { SK_PNMI_HRX_JABBER, SK_PNMI_HRX_255},
-/* Bit47 */ { SK_PNMI_HRX_CARRIER, SK_PNMI_HRX_511},
-/* Bit48 */ { SK_PNMI_HRX_IRLENGTH, SK_PNMI_HRX_1023},
-/* Bit49 */ { SK_PNMI_HRX_SYMBOL, SK_PNMI_HRX_MAX},
-/* Bit50 */ { SK_PNMI_HRX_SHORTS, SK_PNMI_HRX_LONGFRAMES},
-/* Bit51 */ { SK_PNMI_HRX_RUNT, SK_PNMI_HRX_TOO_LONG},
-/* Bit52 */ { SK_PNMI_HRX_TOO_LONG, SK_PNMI_HRX_JABBER},
-/* Bit53 */ { SK_PNMI_HRX_FCS, SK_PNMI_HRX_RESERVED},
-/* Bit54 */ { SK_PNMI_HRX_RESERVED, SK_PNMI_HRX_OVERFLOW},
-/* Bit55 */ { SK_PNMI_HRX_CEXT, SK_PNMI_HRX_RESERVED},
-/* Bit56 */ { SK_PNMI_HRX_UTILUNDER, SK_PNMI_HRX_RESERVED},
-/* Bit57 */ { SK_PNMI_HRX_UTILOVER, SK_PNMI_HRX_RESERVED},
-/* Bit58 */ { SK_PNMI_HRX_64, SK_PNMI_HRX_RESERVED},
-/* Bit59 */ { SK_PNMI_HRX_127, SK_PNMI_HRX_RESERVED},
-/* Bit60 */ { SK_PNMI_HRX_255, SK_PNMI_HRX_RESERVED},
-/* Bit61 */ { SK_PNMI_HRX_511, SK_PNMI_HRX_RESERVED},
-/* Bit62 */ { SK_PNMI_HRX_1023, SK_PNMI_HRX_RESERVED},
-/* Bit63 */ { SK_PNMI_HRX_MAX, SK_PNMI_HRX_RESERVED}
+/* Bit42 */ { SK_PNMI_HRX_BURST, SK_PNMI_HRX_UNDERSIZE},
+/* Bit43 */ { SK_PNMI_HRX_MISSED, SK_PNMI_HRX_RUNT},
+/* Bit44 */ { SK_PNMI_HRX_FRAMING, SK_PNMI_HRX_64},
+/* Bit45 */ { SK_PNMI_HRX_OVERFLOW, SK_PNMI_HRX_127},
+/* Bit46 */ { SK_PNMI_HRX_JABBER, SK_PNMI_HRX_255},
+/* Bit47 */ { SK_PNMI_HRX_CARRIER, SK_PNMI_HRX_511},
+/* Bit48 */ { SK_PNMI_HRX_IRLENGTH, SK_PNMI_HRX_1023},
+/* Bit49 */ { SK_PNMI_HRX_SYMBOL, SK_PNMI_HRX_MAX},
+/* Bit50 */ { SK_PNMI_HRX_SHORTS, SK_PNMI_HRX_LONGFRAMES},
+/* Bit51 */ { SK_PNMI_HRX_RUNT, SK_PNMI_HRX_TOO_LONG},
+/* Bit52 */ { SK_PNMI_HRX_TOO_LONG, SK_PNMI_HRX_JABBER},
+/* Bit53 */ { SK_PNMI_HRX_FCS, SK_PNMI_HRX_RESERVED},
+/* Bit54 */ { SK_PNMI_HRX_RESERVED, SK_PNMI_HRX_OVERFLOW},
+/* Bit55 */ { SK_PNMI_HRX_CEXT, SK_PNMI_HRX_RESERVED},
+/* Bit56 */ { SK_PNMI_HRX_UTILUNDER, SK_PNMI_HRX_RESERVED},
+/* Bit57 */ { SK_PNMI_HRX_UTILOVER, SK_PNMI_HRX_RESERVED},
+/* Bit58 */ { SK_PNMI_HRX_64, SK_PNMI_HRX_RESERVED},
+/* Bit59 */ { SK_PNMI_HRX_127, SK_PNMI_HRX_RESERVED},
+/* Bit60 */ { SK_PNMI_HRX_255, SK_PNMI_HRX_RESERVED},
+/* Bit61 */ { SK_PNMI_HRX_511, SK_PNMI_HRX_RESERVED},
+/* Bit62 */ { SK_PNMI_HRX_1023, SK_PNMI_HRX_RESERVED},
+/* Bit63 */ { SK_PNMI_HRX_MAX, SK_PNMI_HRX_RESERVED}
};
/*
@@ -8253,7 +8253,7 @@ char *pBuf,
SK_U32 Offset,
SK_U32 PhysPortIndex)
{
- SK_GEPORT *pPrt;
+ SK_GEPORT *pPrt;
SK_PNMI_VCT *pVctData;
SK_U32 RetCode;
SK_U8 LinkSpeedUsed;
diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c
index e5a4f7e..c9763e7 100644
--- a/drivers/net/sk98lin/skgesirq.c
+++ b/drivers/net/sk98lin/skgesirq.c
@@ -830,10 +830,10 @@ SK_U32 Istatus) /* Interrupt status word */
SK_EVPARA Para;
SK_U32 RegVal32; /* Read register value */
SK_GEPORT *pPrt; /* GIni Port struct pointer */
- unsigned Len;
+ unsigned Len;
SK_U64 Octets;
- SK_U16 PhyInt;
- SK_U16 PhyIMsk;
+ SK_U16 PhyInt;
+ SK_U16 PhyIMsk;
int i;
if ((Istatus & IS_HW_ERR) != 0) {
diff --git a/drivers/net/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c
index 2ab635a..0c5d9b4 100644
--- a/drivers/net/sk98lin/ski2c.c
+++ b/drivers/net/sk98lin/ski2c.c
@@ -281,7 +281,7 @@ static const char SysKonnectFileId[] =
. +-----------------+
. | Temperature and |
. | Voltage Sensor |
-. | LM80 |
+. | LM80 |
. +-----------------+
. |
. |
@@ -323,7 +323,7 @@ intro()
*/
#ifndef I2C_SLOW_TIMING
#define T_CLK_LOW 1300L /* clock low time in ns */
-#define T_CLK_HIGH 600L /* clock high time in ns */
+#define T_CLK_HIGH 600L /* clock high time in ns */
#define T_DATA_IN_SETUP 100L /* data in Set-up Time */
#define T_START_HOLD 600L /* start condition hold time */
#define T_START_SETUP 600L /* start condition Set-up time */
diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
index 687572b..0229877 100644
--- a/drivers/net/sk98lin/sklm80.c
+++ b/drivers/net/sk98lin/sklm80.c
@@ -122,7 +122,7 @@ static const char SysKonnectFileId[] =
/*
* read the register 'Reg' from the device 'Dev'
*
- * return read error -1
+ * return read error -1
* success the read value
*/
int SkLm80RcvReg(
diff --git a/drivers/net/sk98lin/skproc.c b/drivers/net/sk98lin/skproc.c
index 4e34073..94a6a56 100644
--- a/drivers/net/sk98lin/skproc.c
+++ b/drivers/net/sk98lin/skproc.c
@@ -86,21 +86,20 @@
#define SPECIALX 32 /* 0x */
#define LARGE 64
-extern SK_AC *pACList;
-extern struct net_device *SkGeRootDev;
+extern SK_AC *pACList;
+extern struct net_device *SkGeRootDev;
-extern char * SkNumber(
- char * str,
- long long num,
- int base,
- int size,
- int precision,
- int type);
+extern char *SkNumber (char *str,
+ long long num,
+ int base,
+ int size,
+ int precision,
+ int type);
/*****************************************************************************
*
- * proc_read - print "summaries" entry
+ * proc_read - print "summaries" entry
*
* Description:
* This function fills the proc entry with statistic data about
@@ -120,16 +119,16 @@ void *data)
int len = 0;
int t;
int i;
- DEV_NET *pNet;
- SK_AC *pAC;
- char test_buf[100];
- char sens_msg[50];
- unsigned long Flags;
- unsigned int Size;
- struct SK_NET_DEVICE *next;
- struct SK_NET_DEVICE *SkgeProcDev = SkGeRootDev;
-
- SK_PNMI_STRUCT_DATA *pPnmiStruct;
+ DEV_NET *pNet;
+ SK_AC *pAC;
+ char test_buf[100];
+ char sens_msg[50];
+ unsigned long Flags;
+ unsigned int Size;
+ struct SK_NET_DEVICE *next;
+ struct SK_NET_DEVICE *SkgeProcDev = SkGeRootDev;
+
+ SK_PNMI_STRUCT_DATA *pPnmiStruct;
SK_PNMI_STAT *pPnmiStat;
struct proc_dir_entry *file = (struct proc_dir_entry*) data;
@@ -393,31 +392,31 @@ void *data)
*/
static long SkDoDiv (long long Dividend, int Divisor, long long *pErg)
{
- long Rest;
- long long Ergebnis;
- long Akku;
+ long Rest;
+ long long Ergebnis;
+ long Akku;
- Akku = Dividend >> 32;
+ Akku = Dividend >> 32;
- Ergebnis = ((long long) (Akku / Divisor)) << 32;
- Rest = Akku % Divisor ;
+ Ergebnis = ((long long) (Akku / Divisor)) << 32;
+ Rest = Akku % Divisor;
- Akku = Rest << 16;
- Akku |= ((Dividend & 0xFFFF0000) >> 16);
+ Akku = Rest << 16;
+ Akku |= ((Dividend & 0xFFFF0000) >> 16);
- Ergebnis += ((long long) (Akku / Divisor)) << 16;
- Rest = Akku % Divisor ;
+ Ergebnis += ((long long) (Akku / Divisor)) << 16;
+ Rest = Akku % Divisor;
- Akku = Rest << 16;
- Akku |= (Dividend & 0xFFFF);
+ Akku = Rest << 16;
+ Akku |= (Dividend & 0xFFFF);
- Ergebnis += (Akku / Divisor);
- Rest = Akku % Divisor ;
+ Ergebnis += (Akku / Divisor);
+ Rest = Akku % Divisor;
- *pErg = Ergebnis;
- return (Rest);
+ *pErg = Ergebnis;
+ return (Rest);
}
diff --git a/drivers/net/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c
index f8a3b41..14a6f40 100644
--- a/drivers/net/sk98lin/skrlmt.c
+++ b/drivers/net/sk98lin/skrlmt.c
@@ -350,7 +350,7 @@ extern "C" {
/* ----- Private RLMT defaults ----- */
#define SK_RLMT_DEF_PREF_PORT 0 /* "Lower" port. */
-#define SK_RLMT_DEF_MODE SK_RLMT_CHECK_LINK /* Default RLMT Mode. */
+#define SK_RLMT_DEF_MODE SK_RLMT_CHECK_LINK /* Default RLMT Mode. */
/* ----- Private RLMT checking states ----- */
@@ -530,7 +530,7 @@ typedef struct s_SpTreeRlmtPacket {
SK_MAC_ADDR SkRlmtMcAddr = {{0x01, 0x00, 0x5A, 0x52, 0x4C, 0x4D}};
SK_MAC_ADDR BridgeMcAddr = {{0x01, 0x80, 0xC2, 0x00, 0x00, 0x00}};
-SK_MAC_ADDR BcAddr = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}};
+SK_MAC_ADDR BcAddr = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}};
/* local variables ************************************************************/
diff --git a/drivers/net/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c
index 3b81e67..429da82 100644
--- a/drivers/net/sk98lin/skvpd.c
+++ b/drivers/net/sk98lin/skvpd.c
@@ -288,10 +288,10 @@ int addr) /* VPD address */
. write 1.8 ms 3.6 ms
. internal write cyles 0.7 ms 7.0 ms
. -------------------------------------------------------------------
-. over all program time 2.5 ms 10.6 ms
+. over all program time 2.5 ms 10.6 ms
. read 1.3 ms 2.6 ms
. -------------------------------------------------------------------
-. over all 3.8 ms 13.2 ms
+. over all 3.8 ms 13.2 ms
.
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index e6b5a95..7946000 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -1247,7 +1247,7 @@ int Port) /* Port Index (MAC_1 + n) */
* (Timing requirements: Broadcom: 400ns, Level One: none, National: 80ns).
*
* ATTENTION:
- * It is absolutely necessary to reset the SW_RST Bit first
+ * It is absolutely necessary to reset the SW_RST Bit first
* before calling this function.
*
* Returns:
@@ -1351,7 +1351,7 @@ int Port) /* Port Index (MAC_1 + n) */
* Description:
*
* ATTENTION:
- * It is absolutely necessary to reset the SW_RST Bit first
+ * It is absolutely necessary to reset the SW_RST Bit first
* before calling this function.
*
* Returns:
@@ -1919,7 +1919,7 @@ int Port) /* Port Index (MAC_1 + n) */
/* Configuration Actions for Half Duplex Mode */
/*
* XM_BURST = default value. We are probable not quick
- * enough at the 'XMAC' bus to burst 8kB.
+ * enough at the 'XMAC' bus to burst 8kB.
* The XMAC stops bursting if no transmit frames
* are available or the burst limit is exceeded.
*/
@@ -2879,8 +2879,8 @@ SK_U16 PhyStat) /* PHY Status word to analyse */
*
* Returns:
* SK_AND_OK o.k.
- * SK_AND_DUP_CAP Duplex capability error happened
- * SK_AND_OTHER Other error happened
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
*/
static int SkXmAutoNegDoneXmac(
SK_AC *pAC, /* adapter context */
@@ -2962,8 +2962,8 @@ int Port) /* Port Index (MAC_1 + n) */
*
* Returns:
* SK_AND_OK o.k.
- * SK_AND_DUP_CAP Duplex capability error happened
- * SK_AND_OTHER Other error happened
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
*/
static int SkXmAutoNegDoneBcom(
SK_AC *pAC, /* adapter context */
@@ -3063,8 +3063,8 @@ int Port) /* Port Index (MAC_1 + n) */
*
* Returns:
* SK_AND_OK o.k.
- * SK_AND_DUP_CAP Duplex capability error happened
- * SK_AND_OTHER Other error happened
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
*/
static int SkGmAutoNegDoneMarv(
SK_AC *pAC, /* adapter context */
@@ -3168,8 +3168,8 @@ int Port) /* Port Index (MAC_1 + n) */
*
* Returns:
* SK_AND_OK o.k.
- * SK_AND_DUP_CAP Duplex capability error happened
- * SK_AND_OTHER Other error happened
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
*/
static int SkXmAutoNegDoneLone(
SK_AC *pAC, /* adapter context */
@@ -3273,8 +3273,8 @@ int Port) /* Port Index (MAC_1 + n) */
*
* Returns:
* SK_AND_OK o.k.
- * SK_AND_DUP_CAP Duplex capability error happened
- * SK_AND_OTHER Other error happened
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
*/
static int SkXmAutoNegDoneNat(
SK_AC *pAC, /* adapter context */
@@ -3295,8 +3295,8 @@ int Port) /* Port Index (MAC_1 + n) */
*
* Returns:
* SK_AND_OK o.k.
- * SK_AND_DUP_CAP Duplex capability error happened
- * SK_AND_OTHER Other error happened
+ * SK_AND_DUP_CAP Duplex capability error happened
+ * SK_AND_OTHER Other error happened
*/
int SkMacAutoNegDone(
SK_AC *pAC, /* adapter context */
@@ -4323,7 +4323,7 @@ SK_U64 *pStatus) /* ptr for return overflow status value */
*/
int SkGmCableDiagStatus(
SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
+SK_IOC IoC, /* IO context */
int Port, /* Port Index (MAC_1 + n) */
SK_BOOL StartTest) /* flag for start / get result */
{
diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h
index 96ff04d..967addd 100644
--- a/drivers/net/smc91111.h
+++ b/drivers/net/smc91111.h
@@ -31,7 +31,7 @@
. information under www.smsc.com.
.
. Authors
- . Erik Stahlman ( erik@vt.edu )
+ . Erik Stahlman ( erik@vt.edu )
. Daris A Nevil ( dnevil@snmc.com )
.
. History
@@ -56,7 +56,7 @@ void smc_set_mac_addr (const unsigned char *addr);
typedef unsigned char byte;
typedef unsigned short word;
-typedef unsigned long int dword;
+typedef unsigned long int dword;
/*
. DEBUGGING LEVELS
@@ -77,8 +77,8 @@ typedef unsigned long int dword;
#ifdef CONFIG_PXA250
#ifdef CONFIG_XSENGINE
-#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))))
-#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r<<1))))
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r<<1))))
#define SMC_inb(p) ({ \
unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p<<1)); \
unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \
@@ -99,8 +99,8 @@ typedef unsigned long int dword;
else ___v &= 0xff; \
___v; })
#else
-#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
-#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
#define SMC_inb(p) ({ \
unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p)); \
unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \
@@ -149,28 +149,28 @@ typedef unsigned long int dword;
} \
})
-#define SMC_insl(r,b,l) ({ int __i ; \
+#define SMC_insl(r,b,l) ({ int __i ; \
dword *__b2; \
- __b2 = (dword *) b; \
- for (__i = 0; __i < l; __i++) { \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inl(r); \
SMC_inl(0); \
}; \
})
-#define SMC_insw(r,b,l) ({ int __i ; \
+#define SMC_insw(r,b,l) ({ int __i ; \
word *__b2; \
- __b2 = (word *) b; \
- for (__i = 0; __i < l; __i++) { \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inw(r); \
SMC_inw(0); \
}; \
})
-#define SMC_insb(r,b,l) ({ int __i ; \
+#define SMC_insb(r,b,l) ({ int __i ; \
byte *__b2; \
- __b2 = (byte *) b; \
- for (__i = 0; __i < l; __i++) { \
+ __b2 = (byte *) b; \
+ for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inb(r); \
SMC_inb(0); \
}; \
@@ -187,10 +187,10 @@ typedef unsigned long int dword;
((0x00FF0000UL & _x) >> 8) | \
(_x >> 24)); })
-#define SMC_inl(r) (SMC_LEON_SWAP32((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0)))))
-#define SMC_inl_nosw(r) ((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))))
-#define SMC_inw(r) (SMC_LEON_SWAP16((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0)))))
-#define SMC_inw_nosw(r) ((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))))
+#define SMC_inl(r) (SMC_LEON_SWAP32((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0)))))
+#define SMC_inl_nosw(r) ((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))))
+#define SMC_inw(r) (SMC_LEON_SWAP16((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0)))))
+#define SMC_inw_nosw(r) ((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))))
#define SMC_inb(p) ({ \
word ___v = SMC_inw((p) & ~1); \
if ((p) & 1) ___v >>= 8; \
@@ -221,7 +221,7 @@ typedef unsigned long int dword;
SMC_outw_nosw( *(__b2 + __i), r); \
} \
}while(0)
-#define SMC_insl(r,b,l) do{ int __i ; \
+#define SMC_insl(r,b,l) do{ int __i ; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
@@ -229,7 +229,7 @@ typedef unsigned long int dword;
}; \
}while(0)
-#define SMC_insw(r,b,l) do{ int __i ; \
+#define SMC_insw(r,b,l) do{ int __i ; \
word *__b2; \
__b2 = (word *) b; \
for (__i = 0; __i < l; __i++) { \
@@ -237,7 +237,7 @@ typedef unsigned long int dword;
}; \
}while(0)
-#define SMC_insb(r,b,l) do{ int __i ; \
+#define SMC_insb(r,b,l) do{ int __i ; \
byte *__b2; \
__b2 = (byte *) b; \
for (__i = 0; __i < l; __i++) { \
@@ -253,11 +253,11 @@ typedef unsigned long int dword;
*/
#ifdef CONFIG_ADNPESC1
-#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+((r)<<1))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+((r)<<1))))
#elif CONFIG_BLACKFIN
-#define SMC_inw(r) ({ word __v = (*((volatile word *)(SMC_BASE_ADDRESS+(r)))); SSYNC(); __v;})
+#define SMC_inw(r) ({ word __v = (*((volatile word *)(SMC_BASE_ADDRESS+(r)))); SSYNC(); __v;})
#else
-#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
#endif
#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF)
@@ -287,12 +287,12 @@ typedef unsigned long int dword;
#endif
#if 0
-#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
+#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
#else
-#define SMC_insw(r,b,l) ({ int __i ; \
+#define SMC_insw(r,b,l) ({ int __i ; \
word *__b2; \
- __b2 = (word *) b; \
- for (__i = 0; __i < l; __i++) { \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inw(r); \
SMC_inw(0); \
}; \
@@ -304,15 +304,15 @@ typedef unsigned long int dword;
#if defined(CONFIG_SMC_USE_32_BIT)
#ifdef CONFIG_XSENGINE
-#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))))
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))))
#else
-#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
#endif
-#define SMC_insl(r,b,l) ({ int __i ; \
+#define SMC_insl(r,b,l) ({ int __i ; \
dword *__b2; \
- __b2 = (dword *) b; \
- for (__i = 0; __i < l; __i++) { \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inl(r); \
SMC_inl(0); \
}; \
@@ -352,21 +352,21 @@ typedef unsigned long int dword;
. Bank Select Register:
.
. yyyy yyyy 0000 00xx
- . xx = bank number
+ . xx = bank number
. yyyy yyyy = 0x33, for identification purposes.
*/
#define BANK_SELECT 14
/* Transmit Control Register */
/* BANK 0 */
-#define TCR_REG 0x0000 /* transmit control register */
+#define TCR_REG 0x0000 /* transmit control register */
#define TCR_ENABLE 0x0001 /* When 1 we can transmit */
#define TCR_LOOP 0x0002 /* Controls output pin LBK */
#define TCR_FORCOL 0x0004 /* When 1 will force a collision */
#define TCR_PAD_EN 0x0080 /* When 1 will pad tx frames < 64 bytes w/0 */
#define TCR_NOCRC 0x0100 /* When 1 will not append CRC to tx frames */
#define TCR_MON_CSN 0x0400 /* When 1 tx monitors carrier */
-#define TCR_FDUPLX 0x0800 /* When 1 enables full duplex operation */
+#define TCR_FDUPLX 0x0800 /* When 1 enables full duplex operation */
#define TCR_STP_SQET 0x1000 /* When 1 stops tx if Signal Quality Error */
#define TCR_EPH_LOOP 0x2000 /* When 1 enables EPH block loopback */
#define TCR_SWFDUP 0x8000 /* When 1 enables Switched Full Duplex mode */
@@ -374,7 +374,7 @@ typedef unsigned long int dword;
#define TCR_CLEAR 0 /* do NOTHING */
/* the default settings for the TCR register : */
/* QUESTION: do I want to enable padding of short packets ? */
-#define TCR_DEFAULT TCR_ENABLE
+#define TCR_DEFAULT TCR_ENABLE
/* EPH Status Register */
@@ -406,7 +406,7 @@ typedef unsigned long int dword;
#define RCR_STRIP_CRC 0x0200 /* When set strips CRC from rx packets */
#define RCR_ABORT_ENB 0x0200 /* When set will abort rx on collision */
#define RCR_FILT_CAR 0x0400 /* When set filters leading 12 bit s of carrier */
-#define RCR_SOFTRST 0x8000 /* resets the chip */
+#define RCR_SOFTRST 0x8000 /* resets the chip */
/* the normal settings for the RCR register : */
#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
@@ -507,11 +507,11 @@ typedef unsigned long int dword;
#define MMU_CMD_REG 0x0000
#define MC_BUSY 1 /* When 1 the last release has not completed */
#define MC_NOP (0<<5) /* No Op */
-#define MC_ALLOC (1<<5) /* OR with number of 256 byte packets */
+#define MC_ALLOC (1<<5) /* OR with number of 256 byte packets */
#define MC_RESET (2<<5) /* Reset MMU to initial state */
-#define MC_REMOVE (3<<5) /* Remove the current rx packet */
-#define MC_RELEASE (4<<5) /* Remove and release the current rx packet */
-#define MC_FREEPKT (5<<5) /* Release packet in PNR register */
+#define MC_REMOVE (3<<5) /* Remove the current rx packet */
+#define MC_RELEASE (4<<5) /* Remove and release the current rx packet */
+#define MC_FREEPKT (5<<5) /* Release packet in PNR register */
#define MC_ENQUEUE (6<<5) /* Enqueue the packet for transmit */
#define MC_RSTTXFIFO (7<<5) /* Reset the TX FIFOs */
@@ -543,7 +543,7 @@ typedef unsigned long int dword;
/* BANK 2 */
#define PTR_REG 0x0006
#define PTR_RCV 0x8000 /* 1=Receive area, 0=Transmit area */
-#define PTR_AUTOINC 0x4000 /* Auto increment the pointer on each access */
+#define PTR_AUTOINC 0x4000 /* Auto increment the pointer on each access */
#define PTR_READ 0x2000 /* When 1 the operation is a read */
#define PTR_NOTEMPTY 0x0800 /* When 1 _do not_ write fifo DATA REG */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index c17dcf4..5302cb5 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -79,7 +79,7 @@ static inline void reg_write(u32 addr, u32 val)
#define RX_STS_MII_ERR 0x00000008
#define RX_STS_DRIBBLING 0x00000004
#define RX_STS_CRC_ERR 0x00000002
-#define RX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x44)
+#define RX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x44)
#define TX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x48)
#define TX_STS_TAG 0xFFFF0000
#define TX_STS_ES 0x00008000
@@ -196,9 +196,9 @@ static inline void reg_write(u32 addr, u32 val)
#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */
#define HW_CFG_TR 0x00003000 /* R/W */
#define HW_CFG_PHY_CLK_SEL 0x00000060 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */
+#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */
+#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */
+#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */
#define HW_CFG_SMI_SEL 0x00000010 /* R/W */
#define HW_CFG_EXT_PHY_DET 0x00000008 /* RO */
#define HW_CFG_EXT_PHY_EN 0x00000004 /* R/W */
diff --git a/drivers/net/tigon3.h b/drivers/net/tigon3.h
index c03347f..551107b 100644
--- a/drivers/net/tigon3.h
+++ b/drivers/net/tigon3.h
@@ -3238,7 +3238,7 @@ LM_VOID LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr,
#define REG_WR_OFFSET(pDevice, Offset, Value32) \
(((Offset >=0x200 ) && (Offset < 0x400)) || \
- ((pDevice)->EnablePciXFix == FALSE)) ? \
+ ((pDevice)->EnablePciXFix == FALSE)) ? \
(void) writel(Value32, ((LM_UINT8 *) (pDevice)->pMemView + Offset)) : \
LM_RegWrInd(pDevice, Offset, Value32)
diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h
index 597ea1d..6a2338b 100644
--- a/drivers/net/tsec.h
+++ b/drivers/net/tsec.h
@@ -36,9 +36,9 @@
#define MAC_ADDR_LEN 6
-/* #define TSEC_TIMEOUT 1000000 */
+/* #define TSEC_TIMEOUT 1000000 */
#define TSEC_TIMEOUT 1000
-#define TOUT_LOOP 1000000
+#define TOUT_LOOP 1000000
#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
@@ -58,12 +58,12 @@
#define MACCFG2_INIT_SETTINGS 0x00007205
#define MACCFG2_FULL_DUPLEX 0x00000001
-#define MACCFG2_IF 0x00000300
+#define MACCFG2_IF 0x00000300
#define MACCFG2_GMII 0x00000200
-#define MACCFG2_MII 0x00000100
+#define MACCFG2_MII 0x00000100
#define ECNTRL_INIT_SETTINGS 0x00001000
-#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_TBI_MODE 0x00000020
#define ECNTRL_R100 0x00000008
#define ECNTRL_SGMII_MODE 0x00000002
@@ -76,21 +76,21 @@
#define MIIMCFG_INIT_VALUE 0x00000003
#define MIIMCFG_RESET 0x80000000
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
-#define MIIM_CONTROL 0x00
+#define MIIM_CONTROL 0x00
#define MIIM_CONTROL_RESET 0x00009140
-#define MIIM_CONTROL_INIT 0x00001140
-#define MIIM_CONTROL_RESTART 0x00001340
-#define MIIM_ANEN 0x00001000
+#define MIIM_CONTROL_INIT 0x00001140
+#define MIIM_CONTROL_RESTART 0x00001340
+#define MIIM_ANEN 0x00001000
-#define MIIM_CR 0x00
+#define MIIM_CR 0x00
#define MIIM_CR_RST 0x00008000
-#define MIIM_CR_INIT 0x00001000
+#define MIIM_CR_INIT 0x00001000
#define MIIM_STATUS 0x1
-#define MIIM_STATUS_AN_DONE 0x00000020
+#define MIIM_STATUS_AN_DONE 0x00000020
#define MIIM_STATUS_LINK 0x0004
#define PHY_BMSR_AUTN_ABLE 0x0008
#define PHY_BMSR_AUTN_COMP 0x0020
@@ -120,16 +120,16 @@
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT 0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100 0x0008
+#define MIIM_CIS8201_AUX_CONSTAT 0x1c
+#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004
+#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018
+#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010
+#define MIIM_CIS8201_AUXCONSTAT_100 0x0008
/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1 0x17
-#define MIIM_CIS8201_EXTCON1_INIT 0x0000
+#define MIIM_CIS8201_EXT_CON1 0x17
+#define MIIM_CIS8201_EXTCON1_INIT 0x0000
/* Cicada 8204 Extended PHY Control Register 1 */
#define MIIM_CIS8204_EPHY_CON 0x17
@@ -145,21 +145,21 @@
/* Entry for Vitesse VSC8244 regs starts here */
/* Vitesse VSC8244 Auxiliary Control/Status Register */
-#define MIIM_VSC8244_AUX_CONSTAT 0x1c
-#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000
-#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018
-#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010
-#define MIIM_VSC8244_AUXCONSTAT_100 0x0008
-#define MIIM_CONTROL_INIT_LOOPBACK 0x4000
+#define MIIM_VSC8244_AUX_CONSTAT 0x1c
+#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000
+#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018
+#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010
+#define MIIM_VSC8244_AUXCONSTAT_100 0x0008
+#define MIIM_CONTROL_INIT_LOOPBACK 0x4000
/* Vitesse VSC8244 Extended PHY Control Register 1 */
-#define MIIM_VSC8244_EPHY_CON 0x17
-#define MIIM_VSC8244_EPHYCON_INIT 0x0006
+#define MIIM_VSC8244_EPHY_CON 0x17
+#define MIIM_VSC8244_EPHYCON_INIT 0x0006
/* Vitesse VSC8244 Serial LED Control Register */
-#define MIIM_VSC8244_LED_CON 0x1b
-#define MIIM_VSC8244_LEDCON_INIT 0xF011
+#define MIIM_VSC8244_LED_CON 0x1b
+#define MIIM_VSC8244_LEDCON_INIT 0xF011
/* Entry for Vitesse VSC8601 regs starts here (Not complete) */
/* Vitesse VSC8601 Extended PHY Control Register 1 */
@@ -168,11 +168,11 @@
#define MIIM_VSC8601_SKEW_CTRL 0x1c
/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS 0x11
-#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
-#define MIIM_88E1011_PHYSTAT_100 0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
+#define MIIM_88E1011_PHY_STATUS 0x11
+#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
+#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
+#define MIIM_88E1011_PHYSTAT_100 0x4000
+#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
#define MIIM_88E1011_PHYSTAT_LINK 0x0400
@@ -189,7 +189,7 @@
#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
-#define MIIM_88E1145_PHY_PAGE 29
+#define MIIM_88E1145_PHY_PAGE 29
#define MIIM_88E1145_PHY_CAL_OV 30
/* RTL8211B PHY Status Register */
@@ -220,12 +220,12 @@
#define MIIM_DM9161_10BTCSR_INIT 0x7800
/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
+#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
-#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
+#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
+#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
/* DP83865 Control register values */
#define MIIM_DP83865_CR_INIT 0x9200
@@ -237,18 +237,18 @@
#define MIIM_DP83865_SPD_100 0x0008
#define MIIM_DP83865_DPX_FULL 0x0002
-#define MIIM_READ_COMMAND 0x00000001
+#define MIIM_READ_COMMAND 0x00000001
#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN
#define MINFLR_INIT_SETTINGS 0x00000040
-#define DMACTRL_INIT_SETTINGS 0x000000c3
-#define DMACTRL_GRS 0x00000010
-#define DMACTRL_GTS 0x00000008
+#define DMACTRL_INIT_SETTINGS 0x000000c3
+#define DMACTRL_GRS 0x00000010
+#define DMACTRL_GTS 0x00000008
-#define TSTAT_CLEAR_THALT 0x80000000
-#define RSTAT_CLEAR_RHALT 0x00800000
+#define TSTAT_CLEAR_THALT 0x80000000
+#define RSTAT_CLEAR_RHALT 0x00800000
#define IEVENT_INIT_CLEAR 0xffffffff
@@ -274,7 +274,7 @@
#define IMASK_INIT_CLEAR 0x00000000
#define IMASK_TXEEN 0x00400000
#define IMASK_TXBEN 0x00200000
-#define IMASK_TXFEN 0x00100000
+#define IMASK_TXFEN 0x00100000
#define IMASK_RXFEN0 0x00000080
@@ -296,7 +296,7 @@
#define TXBD_RETRYLIMIT 0x0040
#define TXBD_RETRYCOUNTMASK 0x003c
#define TXBD_UNDERRUN 0x0002
-#define TXBD_STATS 0x03ff
+#define TXBD_STATS 0x03ff
/* RxBD status field bits */
#define RXBD_EMPTY 0x8000
@@ -318,16 +318,16 @@
typedef struct txbd8
{
- ushort status; /* Status Fields */
- ushort length; /* Buffer length */
- uint bufPtr; /* Buffer Pointer */
+ ushort status; /* Status Fields */
+ ushort length; /* Buffer length */
+ uint bufPtr; /* Buffer Pointer */
} txbd8_t;
typedef struct rxbd8
{
- ushort status; /* Status Fields */
- ushort length; /* Buffer Length */
- uint bufPtr; /* Buffer Pointer */
+ ushort status; /* Status Fields */
+ ushort length; /* Buffer Length */
+ uint bufPtr; /* Buffer Pointer */
} rxbd8_t;
typedef struct rmon_mib
@@ -431,21 +431,21 @@ typedef struct tsec
/* Transmit Control and Status Registers (0x2_n100) */
uint tctrl; /* Transmit Control */
- uint tstat; /* Transmit Status */
+ uint tstat; /* Transmit Status */
uint res108;
uint tbdlen; /* Tx BD Data Length */
uint res110[5];
- uint ctbptr; /* Current TxBD Pointer */
+ uint ctbptr; /* Current TxBD Pointer */
uint res128[23];
uint tbptr; /* TxBD Pointer */
uint res188[30];
/* (0x2_n200) */
- uint res200;
+ uint res200;
uint tbase; /* TxBD Base Address */
uint res208[42];
uint ostbd; /* Out of Sequence TxBD */
uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */
- uint res2b8[18];
+ uint res2b8[18];
/* Receive Control and Status Registers (0x2_n300) */
uint rctrl; /* Receive Control */
@@ -453,17 +453,17 @@ typedef struct tsec
uint res308;
uint rbdlen; /* RxBD Data Length */
uint res310[4];
- uint res320;
- uint crbptr; /* Current Receive Buffer Pointer */
+ uint res320;
+ uint crbptr; /* Current Receive Buffer Pointer */
uint res328[6];
- uint mrblr; /* Maximum Receive Buffer Length */
+ uint mrblr; /* Maximum Receive Buffer Length */
uint res344[16];
- uint rbptr; /* RxBD Pointer */
- uint res388[30];
+ uint rbptr; /* RxBD Pointer */
+ uint res388[30];
/* (0x2_n400) */
- uint res400;
- uint rbase; /* RxBD Base Address */
- uint res408[62];
+ uint res400;
+ uint rbase; /* RxBD Base Address */
+ uint res408[62];
/* MAC Registers (0x2_n500) */
uint maccfg1; /* MAC Configuration #1 */
@@ -500,12 +500,12 @@ typedef struct tsec
/* Hash Function Registers (0x2_n800) */
tsec_hash_t hash;
- uint res900[128];
+ uint res900[128];
/* Pattern Registers (0x2_nb00) */
- uint resb00[62];
- uint attr; /* Default Attribute Register */
- uint attreli; /* Default Attribute Extract Length and Index */
+ uint resb00[62];
+ uint attr; /* Default Attribute Register */
+ uint attreli; /* Default Attribute Extract Length and Index */
/* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */
uint resc00[256];
@@ -535,18 +535,18 @@ struct tsec_private {
* mii_reg: The register to read or write
*
* mii_data: For writes, the value to put in the register.
- * A value of -1 indicates this is a read.
+ * A value of -1 indicates this is a read.
*
* funct: A function pointer which is invoked for each command.
- * For reads, this function will be passed the value read
+ * For reads, this function will be passed the value read
* from the PHY, and process it.
* For writes, the result of this function will be written
* to the PHY register
*/
struct phy_cmd {
- uint mii_reg;
- uint mii_data;
- uint (*funct) (uint mii_reg, struct tsec_private* priv);
+ uint mii_reg;
+ uint mii_data;
+ uint (*funct) (uint mii_reg, struct tsec_private * priv);
};
/* struct phy_info: a structure which defines attributes for a PHY
@@ -562,18 +562,18 @@ struct phy_cmd {
* commands which tell the driver what to do to the PHY.
*/
struct phy_info {
- uint id;
- char *name;
- uint shift;
- /* Called to configure the PHY, and modify the controller
- * based on the results */
- struct phy_cmd *config;
-
- /* Called when starting up the controller */
- struct phy_cmd *startup;
-
- /* Called when bringing down the controller */
- struct phy_cmd *shutdown;
+ uint id;
+ char *name;
+ uint shift;
+ /* Called to configure the PHY, and modify the controller
+ * based on the results */
+ struct phy_cmd *config;
+
+ /* Called when starting up the controller */
+ struct phy_cmd *startup;
+
+ /* Called when bringing down the controller */
+ struct phy_cmd *shutdown;
};
#endif /* __TSEC_H */
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index d64845f..79d29ae 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -412,7 +412,7 @@ static void uli526x_init(struct eth_device *dev)
}
/* Media Mode Process */
if (!(db->media_mode & ULI526X_AUTO))
- db->op_mode = db->media_mode; /* Force Mode */
+ db->op_mode = db->media_mode; /* Force Mode */
/* Initialize Transmit/Receive decriptor and CR3/4 */
uli526x_descriptor_init(db, db->ioaddr);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ad1b7dd..dec93b9 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libpci.a
+LIB := $(obj)libpci.a
COBJS-y += fsl_pci_init.o
COBJS-y += pci.o
@@ -36,8 +36,8 @@ COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b820d5e..b3ae3b1 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -38,8 +38,8 @@
#include <pci.h>
#define PCI_HOSE_OP(rw, size, type) \
-int pci_hose_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, \
+int pci_hose_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, \
int offset, type value) \
{ \
return hose->rw##_##size(hose, dev, offset, value); \
@@ -77,7 +77,7 @@ PCI_OP(write, dword, u32, )
#define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \
int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
- pci_dev_t dev, \
+ pci_dev_t dev, \
int offset, type val) \
{ \
u32 val32; \
@@ -94,7 +94,7 @@ int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \
int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\
- pci_dev_t dev, \
+ pci_dev_t dev, \
int offset, type val) \
{ \
u32 val32, mask, ldata, shift; \
diff --git a/drivers/pci/pci_indirect.c b/drivers/pci/pci_indirect.c
index a8220fb..55517a8 100644
--- a/drivers/pci/pci_indirect.c
+++ b/drivers/pci/pci_indirect.c
@@ -33,17 +33,17 @@ extern void out_le32 (volatile unsigned *addr, unsigned int val);
#if defined(CONFIG_MPC8260)
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
-indirect_##rw##_config_##size(struct pci_controller *hose, \
+indirect_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
u32 b, d,f; \
b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \
b = b - hose->first_busno; \
dev = PCI_BDF(b, d, f); \
- out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
+ out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
sync(); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- return 0; \
+ return 0; \
}
#elif defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
@@ -63,7 +63,7 @@ indirect_##rw##_config_##size(struct pci_controller *hose, \
#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
-indirect_##rw##_config_##size(struct pci_controller *hose, \
+indirect_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
u32 b, d,f; \
@@ -75,36 +75,36 @@ indirect_##rw##_config_##size(struct pci_controller *hose, \
else \
out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- return 0; \
+ return 0; \
}
#else
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
-indirect_##rw##_config_##size(struct pci_controller *hose, \
+indirect_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
u32 b, d,f; \
b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \
b = b - hose->first_busno; \
dev = PCI_BDF(b, d, f); \
- out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
+ out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- return 0; \
+ return 0; \
}
#endif
#define INDIRECT_PCI_OP_ERRATA6(rw, size, type, op, mask) \
static int \
-indirect_##rw##_config_##size(struct pci_controller *hose, \
+indirect_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
unsigned int msr = mfmsr(); \
mtmsr(msr & ~(MSR_EE | MSR_CE)); \
- out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
+ out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- out_le32(hose->cfg_addr, 0x00000000); \
+ out_le32(hose->cfg_addr, 0x00000000); \
mtmsr(msr); \
- return 0; \
+ return 0; \
}
INDIRECT_PCI_OP(read, byte, u8 *, in_8, 3)
diff --git a/drivers/pci/pci_sh7780.c b/drivers/pci/pci_sh7780.c
index d63d67d..2d04b4f 100644
--- a/drivers/pci/pci_sh7780.c
+++ b/drivers/pci/pci_sh7780.c
@@ -42,9 +42,9 @@
#define SH7780_PCICR_CFIN 0x00000001
#define p4_in(addr) *((vu_long *)addr)
-#define p4_out(data,addr) *(vu_long *)(addr) = (data)
+#define p4_out(data,addr) *(vu_long *)(addr) = (data)
#define p4_inw(addr) *((vu_short *)addr)
-#define p4_outw(data,addr) *(vu_short *)(addr) = (data)
+#define p4_outw(data,addr) *(vu_short *)(addr) = (data)
int pci_sh4_read_config_dword(struct pci_controller *hose,
pci_dev_t dev, int offset, u32 *value)
diff --git a/drivers/pci/w83c553f.c b/drivers/pci/w83c553f.c
index 5d82ed4..9ea08a2 100644
--- a/drivers/pci/w83c553f.c
+++ b/drivers/pci/w83c553f.c
@@ -182,7 +182,7 @@ void initialise_dma(void)
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL);
break;
- case 1:
+ case 1:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
break;
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 53a485d..ac4378a 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libpcmcia.a
+LIB := $(obj)libpcmcia.a
COBJS-$(CONFIG_I82365) += i82365.o
COBJS-y += mpc8xx_pcmcia.o
@@ -34,8 +34,8 @@ COBJS-y += tqm8xx_pcmcia.o
COBJS-y += marubun_pcmcia.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c
index 2479a66..a213092 100644
--- a/drivers/pcmcia/marubun_pcmcia.c
+++ b/drivers/pcmcia/marubun_pcmcia.c
@@ -39,7 +39,7 @@
&& (defined(CONFIG_MARUBUN_PCCARD))
/* MR-SHPC-01 register */
-#define MRSHPC_MODE (CFG_MARUBUN_MRSHPC + 4)
+#define MRSHPC_MODE (CFG_MARUBUN_MRSHPC + 4)
#define MRSHPC_OPTION (CFG_MARUBUN_MRSHPC + 6)
#define MRSHPC_CSR (CFG_MARUBUN_MRSHPC + 8)
#define MRSHPC_ISR (CFG_MARUBUN_MRSHPC + 10)
diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
index 8a34cd3..14477a4 100644
--- a/drivers/pcmcia/mpc8xx_pcmcia.c
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
@@ -61,18 +61,18 @@ static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
#ifdef CONFIG_HMI10
#define HMI10_FRAM_TIMING ( PCMCIA_SHT(2) \
- | PCMCIA_SST(2) \
- | PCMCIA_SL(4))
+ | PCMCIA_SST(2) \
+ | PCMCIA_SL(4))
#endif
#if defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
#define CFG_PCMCIA_TIMING ( PCMCIA_SHT(9) \
- | PCMCIA_SST(3) \
- | PCMCIA_SL(12))
+ | PCMCIA_SST(3) \
+ | PCMCIA_SL(12))
#else
#define CFG_PCMCIA_TIMING ( PCMCIA_SHT(2) \
- | PCMCIA_SST(4) \
- | PCMCIA_SL(9))
+ | PCMCIA_SST(4) \
+ | PCMCIA_SL(9))
#endif
/* -------------------------------------------------------------------- */
diff --git a/drivers/pcmcia/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c
index 132c7a5..cc980c2 100644
--- a/drivers/pcmcia/tqm8xx_pcmcia.c
+++ b/drivers/pcmcia/tqm8xx_pcmcia.c
@@ -296,10 +296,10 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
power_off(slot);
switch(vcc) {
- case 0: break;
+ case 0: break;
case 33: power_on_3_3(slot); break;
case 50: power_on_5_0(slot); break;
- default: goto done;
+ default: goto done;
}
/* Checking supported voltages */
diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile
index ec5aa73..45a2fff 100644
--- a/drivers/qe/Makefile
+++ b/drivers/qe/Makefile
@@ -22,13 +22,13 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)qe.a
+LIB := $(obj)qe.a
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS := qe.o uccf.o uec.o uec_phy.o $(COBJS-y)
+COBJS := qe.o uccf.o uec.o uec_phy.o $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index 741ed7f..a55555f 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -40,7 +40,7 @@ typedef enum qe_snum_state {
} qe_snum_state_e;
typedef struct qe_snum {
- u8 num; /* snum */
+ u8 num; /* snum */
qe_snum_state_e state; /* state */
} qe_snum_t;
@@ -154,30 +154,30 @@ typedef enum qe_clock {
QE_BRG14, /* Baud Rate Generator 14 */
QE_BRG15, /* Baud Rate Generator 15 */
QE_BRG16, /* Baud Rate Generator 16 */
- QE_CLK1, /* Clock 1 */
- QE_CLK2, /* Clock 2 */
- QE_CLK3, /* Clock 3 */
- QE_CLK4, /* Clock 4 */
- QE_CLK5, /* Clock 5 */
- QE_CLK6, /* Clock 6 */
- QE_CLK7, /* Clock 7 */
- QE_CLK8, /* Clock 8 */
- QE_CLK9, /* Clock 9 */
- QE_CLK10, /* Clock 10 */
- QE_CLK11, /* Clock 11 */
- QE_CLK12, /* Clock 12 */
- QE_CLK13, /* Clock 13 */
- QE_CLK14, /* Clock 14 */
- QE_CLK15, /* Clock 15 */
- QE_CLK16, /* Clock 16 */
- QE_CLK17, /* Clock 17 */
- QE_CLK18, /* Clock 18 */
- QE_CLK19, /* Clock 19 */
- QE_CLK20, /* Clock 20 */
- QE_CLK21, /* Clock 21 */
- QE_CLK22, /* Clock 22 */
- QE_CLK23, /* Clock 23 */
- QE_CLK24, /* Clock 24 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
QE_CLK_DUMMY
} qe_clock_e;
@@ -237,34 +237,34 @@ typedef enum qe_clock {
*/
struct qe_firmware {
struct qe_header {
- u32 length; /* Length of the entire structure, in bytes */
- u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
- u8 version; /* Version of this layout. First ver is '1' */
+ u32 length; /* Length of the entire structure, in bytes */
+ u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
+ u8 version; /* Version of this layout. First ver is '1' */
} header;
- u8 id[62]; /* Null-terminated identifier string */
- u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
- u8 count; /* Number of microcode[] structures */
+ u8 id[62]; /* Null-terminated identifier string */
+ u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
+ u8 count; /* Number of microcode[] structures */
struct {
- u16 model; /* The SOC model */
- u8 major; /* The SOC revision major */
- u8 minor; /* The SOC revision minor */
+ u16 model; /* The SOC model */
+ u8 major; /* The SOC revision major */
+ u8 minor; /* The SOC revision minor */
} __attribute__ ((packed)) soc;
- u8 padding[4]; /* Reserved, for alignment */
- u64 extended_modes; /* Extended modes */
+ u8 padding[4]; /* Reserved, for alignment */
+ u64 extended_modes; /* Extended modes */
u32 vtraps[8]; /* Virtual trap addresses */
- u8 reserved[4]; /* Reserved, for future expansion */
+ u8 reserved[4]; /* Reserved, for future expansion */
struct qe_microcode {
- u8 id[32]; /* Null-terminated identifier */
- u32 traps[16]; /* Trap addresses, 0 == ignore */
- u32 eccr; /* The value for the ECCR register */
- u32 iram_offset; /* Offset into I-RAM for the code */
- u32 count; /* Number of 32-bit words of the code */
- u32 code_offset; /* Offset of the actual microcode */
- u8 major; /* The microcode version major */
- u8 minor; /* The microcode version minor */
- u8 revision; /* The microcode version revision */
- u8 padding; /* Reserved, for alignment */
- u8 reserved[4]; /* Reserved, for future expansion */
+ u8 id[32]; /* Null-terminated identifier */
+ u32 traps[16]; /* Trap addresses, 0 == ignore */
+ u32 eccr; /* The value for the ECCR register */
+ u32 iram_offset;/* Offset into I-RAM for the code */
+ u32 count; /* Number of 32-bit words of the code */
+ u32 code_offset;/* Offset of the actual microcode */
+ u8 major; /* The microcode version major */
+ u8 minor; /* The microcode version minor */
+ u8 revision; /* The microcode version revision */
+ u8 padding; /* Reserved, for alignment */
+ u8 reserved[4]; /* Reserved, for future expansion */
} __attribute__ ((packed)) microcode[1];
/* All microcode binaries should be located here */
/* CRC32 should be located here, after the microcode binaries */
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c
index c5477e0..4a327ab 100644
--- a/drivers/qe/uccf.c
+++ b/drivers/qe/uccf.c
@@ -369,7 +369,7 @@ int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret)
out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT);
out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT);
out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT);
- out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT);
+ out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT);
}
/* Rx clock routing */
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index d34430c..d2c430b 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -381,7 +381,7 @@ static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
{
enet_interface_e enet_if_mode;
- uec_info_t *uec_info;
+ uec_info_t *uec_info;
uec_t *uec_regs;
u32 upsmr;
u32 maccfg2;
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 7762de6..e357a92 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -709,7 +709,7 @@ typedef struct uec_private {
int grace_stopped_rx;
int the_first_run;
/* PHY specific */
- struct uec_mii_info *mii_info;
+ struct uec_mii_info *mii_info;
int oldspeed;
int oldduplex;
int oldlink;
diff --git a/drivers/rtc/date.c b/drivers/rtc/date.c
index a83a723..d30ad92 100644
--- a/drivers/rtc/date.c
+++ b/drivers/rtc/date.c
@@ -36,8 +36,8 @@
#define SECDAY 86400L
#define SECYR (SECDAY * 365)
#define leapyear(year) ((year) % 4 == 0)
-#define days_in_year(a) (leapyear(a) ? 366 : 365)
-#define days_in_month(a) (month_days[(a) - 1])
+#define days_in_year(a) (leapyear(a) ? 366 : 365)
+#define days_in_month(a) (month_days[(a) - 1])
static int month_days[12] = {
31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
diff --git a/drivers/rtc/ds12887.c b/drivers/rtc/ds12887.c
index 57a446d..990ebba 100644
--- a/drivers/rtc/ds12887.c
+++ b/drivers/rtc/ds12887.c
@@ -35,14 +35,14 @@
#define RTC_MINUTES 0x02
#define RTC_MINUTES_ALARM 0x03
#define RTC_HOURS 0x04
-#define RTC_HOURS_ALARM 0x05
-#define RTC_DAY_OF_WEEK 0x06
+#define RTC_HOURS_ALARM 0x05
+#define RTC_DAY_OF_WEEK 0x06
#define RTC_DATE_OF_MONTH 0x07
#define RTC_MONTH 0x08
#define RTC_YEAR 0x09
-#define RTC_CONTROL_A 0x0A
-#define RTC_CONTROL_B 0x0B
-#define RTC_CONTROL_C 0x0C
+#define RTC_CONTROL_A 0x0A
+#define RTC_CONTROL_B 0x0B
+#define RTC_CONTROL_C 0x0C
#define RTC_CONTROL_D 0x0D
#define RTC_CA_UIP 0x80
diff --git a/drivers/rtc/ds1302.c b/drivers/rtc/ds1302.c
index 3a856c8..e4e9154 100644
--- a/drivers/rtc/ds1302.c
+++ b/drivers/rtc/ds1302.c
@@ -66,7 +66,7 @@ struct ds1302_st
unsigned char month:4;
unsigned char zero4:5;
- unsigned char day:3; /* day of week */
+ unsigned char day:3; /* day of week */
unsigned char year10:4;
unsigned char year:4;
@@ -191,7 +191,7 @@ write_ser_drv(unsigned char addr, unsigned char *buf, int count)
void
rtc_init(void)
{
- struct ds1302_st bbclk;
+ struct ds1302_st bbclk;
unsigned char b;
int mod;
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index 70f7017..7c4fe36 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -38,21 +38,21 @@ static void rtc_write (uchar reg, uchar val);
static uchar bin2bcd (unsigned int n);
static unsigned bcd2bin(uchar c);
-#define RTC_PORT_MC146818 CFG_ISA_IO_BASE_ADDRESS + 0x70
-#define RTC_SECONDS 0x00
-#define RTC_SECONDS_ALARM 0x01
-#define RTC_MINUTES 0x02
-#define RTC_MINUTES_ALARM 0x03
-#define RTC_HOURS 0x04
-#define RTC_HOURS_ALARM 0x05
-#define RTC_DAY_OF_WEEK 0x06
-#define RTC_DATE_OF_MONTH 0x07
-#define RTC_MONTH 0x08
-#define RTC_YEAR 0x09
-#define RTC_CONFIG_A 0x0A
-#define RTC_CONFIG_B 0x0B
-#define RTC_CONFIG_C 0x0C
-#define RTC_CONFIG_D 0x0D
+#define RTC_PORT_MC146818 CFG_ISA_IO_BASE_ADDRESS + 0x70
+#define RTC_SECONDS 0x00
+#define RTC_SECONDS_ALARM 0x01
+#define RTC_MINUTES 0x02
+#define RTC_MINUTES_ALARM 0x03
+#define RTC_HOURS 0x04
+#define RTC_HOURS_ALARM 0x05
+#define RTC_DAY_OF_WEEK 0x06
+#define RTC_DATE_OF_MONTH 0x07
+#define RTC_MONTH 0x08
+#define RTC_YEAR 0x09
+#define RTC_CONFIG_A 0x0A
+#define RTC_CONFIG_B 0x0B
+#define RTC_CONFIG_C 0x0C
+#define RTC_CONFIG_D 0x0D
/* ------------------------------------------------------------------------- */
@@ -62,12 +62,12 @@ int rtc_get (struct rtc_time *tmp)
uchar sec, min, hour, mday, wday, mon, year;
/* here check if rtc can be accessed */
while((rtc_read(RTC_CONFIG_A)&0x80)==0x80);
- sec = rtc_read (RTC_SECONDS);
- min = rtc_read (RTC_MINUTES);
+ sec = rtc_read (RTC_SECONDS);
+ min = rtc_read (RTC_MINUTES);
hour = rtc_read (RTC_HOURS);
mday = rtc_read (RTC_DATE_OF_MONTH);
wday = rtc_read (RTC_DAY_OF_WEEK);
- mon = rtc_read (RTC_MONTH);
+ mon = rtc_read (RTC_MONTH);
year = rtc_read (RTC_YEAR);
#ifdef CONFIG_AMIGAONEG3SE
wday -= 1; /* VIA 686 stores Sunday = 1, Monday = 2, ... */
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index ee2b780..c9e797e 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libserial.a
+LIB := $(obj)libserial.a
COBJS-y += atmel_usart.o
COBJS-y += mcfuart.o
@@ -39,8 +39,8 @@ COBJS-y += serial_sh.o
COBJS-y += usbtty.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/serial/serial_max3100.c b/drivers/serial/serial_max3100.c
index 35c5596..0611fc1 100644
--- a/drivers/serial/serial_max3100.c
+++ b/drivers/serial/serial_max3100.c
@@ -94,7 +94,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define MAX3100_CTS (1 << 9) /* clear-to-send bit (inverted ~CTS pin) */
/* data register bits (both directions) */
-#define MAX3100_R (1 << 15) /* receive bit */
+#define MAX3100_R (1 << 15) /* receive bit */
#define MAX3100_T (1 << 14) /* transmit bit */
#define MAX3100_P (1 << 8) /* parity bit */
#define MAX3100_D_MASK 0x00FF /* data bits mask */
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 522f96d..aa4ff35 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -42,7 +42,7 @@
# define SCFRDR (vu_char *)(SCIF_BASE + 0x24)
#else
# define SCFTDR (vu_char *)(SCIF_BASE + 0xC)
-# define SCFSR (vu_short *)(SCIF_BASE + 0x10)
+# define SCFSR (vu_short *)(SCIF_BASE + 0x10)
# define SCFRDR (vu_char *)(SCIF_BASE + 0x14)
#endif
@@ -50,19 +50,19 @@
defined(CONFIG_CPU_SH7785)
# define SCRFDR (vu_short *)(SCIF_BASE + 0x20)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x24)
-# define SCLSR (vu_short *)(SCIF_BASE + 0x28)
+# define SCLSR (vu_short *)(SCIF_BASE + 0x28)
# define SCRER (vu_short *)(SCIF_BASE + 0x2C)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0xFF
#elif defined(CONFIG_CPU_SH7750) || \
defined(CONFIG_CPU_SH7751) || \
defined(CONFIG_CPU_SH7722)
-# define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
-# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
+# define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
+# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0x1F
#elif defined(CONFIG_CPU_SH7720)
-# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
+# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 0x0200
# define FIFOLEVEL_MASK 0x1F
#elif defined(CONFIG_CPU_SH7710)
@@ -79,17 +79,17 @@
# define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
#endif
-#define SCR_RE (1 << 4)
-#define SCR_TE (1 << 5)
+#define SCR_RE (1 << 4)
+#define SCR_TE (1 << 5)
#define FCR_RFRST (1 << 1) /* RFCL */
#define FCR_TFRST (1 << 2) /* TFCL */
-#define FSR_DR (1 << 0)
-#define FSR_RDF (1 << 1)
-#define FSR_FER (1 << 3)
-#define FSR_BRK (1 << 4)
-#define FSR_FER (1 << 3)
-#define FSR_TEND (1 << 6)
-#define FSR_ER (1 << 7)
+#define FSR_DR (1 << 0)
+#define FSR_RDF (1 << 1)
+#define FSR_FER (1 << 3)
+#define FSR_BRK (1 << 4)
+#define FSR_FER (1 << 3)
+#define FSR_TEND (1 << 6)
+#define FSR_ER (1 << 7)
/*----------------------------------------------------------------------*/
@@ -156,8 +156,8 @@ int serial_tstc (void)
return serial_rx_fifo_level() ? 1 : 0;
}
-#define FSR_ERR_CLEAR 0x0063
-#define RDRF_CLEAR 0x00fc
+#define FSR_ERR_CLEAR 0x0063
+#define RDRF_CLEAR 0x00fc
void handle_error( void ){
(void)*SCFSR ;
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index a3b5013..cc2bdac 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -31,7 +31,7 @@
#include "usb_cdc_acm.h"
#include "usbdescriptors.h"
#include <config.h> /* If defined, override Linux identifiers with
- * vendor specific ones */
+ * vendor specific ones */
#if 0
#define TTYDBG(fmt,args...)\
@@ -123,7 +123,7 @@ static struct usb_configuration_descriptor *configuration_descriptor = 0;
static struct usb_device_descriptor device_descriptor = {
.bLength = sizeof(struct usb_device_descriptor),
.bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = cpu_to_le16(USB_BCD_VERSION),
+ .bcdUSB = cpu_to_le16(USB_BCD_VERSION),
.bDeviceSubClass = 0x00,
.bDeviceProtocol = 0x00,
.bMaxPacketSize0 = EP0_MAX_PACKET_SIZE,
@@ -163,11 +163,11 @@ static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
.configuration_desc ={
.bLength =
sizeof(struct usb_configuration_descriptor),
- .bDescriptorType = USB_DT_CONFIG,
+ .bDescriptorType = USB_DT_CONFIG,
.wTotalLength =
cpu_to_le16(sizeof(struct acm_config_desc)),
- .bNumInterfaces = NUM_ACM_INTERFACES,
- .bConfigurationValue = 1,
+ .bNumInterfaces = NUM_ACM_INTERFACES,
+ .bConfigurationValue = 1,
.iConfiguration = STR_CONFIG,
.bmAttributes =
BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
@@ -269,9 +269,9 @@ static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
};
static struct rs232_emu rs232_desc={
- .dter = 115200,
- .stop_bits = 0x00,
- .parity = 0x00,
+ .dter = 115200,
+ .stop_bits = 0x00,
+ .parity = 0x00,
.data_bits = 0x08
};
@@ -322,7 +322,7 @@ gserial_configuration_descriptors[NUM_CONFIGS] ={
COMMUNICATIONS_NO_PROTOCOL,
.iInterface = STR_DATA_INTERFACE
},
- },
+ },
.data_endpoints = {
{
.bLength =
@@ -342,7 +342,7 @@ gserial_configuration_descriptors[NUM_CONFIGS] ={
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize =
cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
- .bInterval = 0xFF,
+ .bInterval = 0xFF,
},
{
.bLength =
@@ -350,7 +350,7 @@ gserial_configuration_descriptors[NUM_CONFIGS] ={
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x03 | USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize =
+ .wMaxPacketSize =
cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
.bInterval = 0xFF,
},
@@ -953,14 +953,14 @@ int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb)
{
switch (request->bRequest){
- case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */
+ case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */
break;
- case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */
+ case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */
break;
case ACM_SET_LINE_ENCODING : /* DTE stop/parity bits
* per character */
break;
- case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */
+ case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */
break;
case ACM_GET_LINE_ENCODING : /* request DTE rate,
* stop/parity bits */
@@ -968,7 +968,7 @@ int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb)
urb->actual_length = sizeof(rs232_desc);
break;
- default:
+ default:
return 1;
}
return 0;
diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h
index 8154e30..71c47bc 100644
--- a/drivers/serial/usbtty.h
+++ b/drivers/serial/usbtty.h
@@ -36,7 +36,7 @@
/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
* DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
-#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
+#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */
#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */
#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
@@ -55,8 +55,8 @@
#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
-#define USBTTY_BCD_DEVICE 0x00
-#define USBTTY_MAXPOWER 0x00
+#define USBTTY_BCD_DEVICE 0x00
+#define USBTTY_MAXPOWER 0x00
#define STR_LANG 0x00
#define STR_MANUFACTURER 0x01
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index b2e3ab9..c166ec5 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -48,7 +48,7 @@
#define MXC_CSPICTRL_POL (1 << 4)
#define MXC_CSPICTRL_PHA (1 << 5)
#define MXC_CSPICTRL_SSCTL (1 << 6)
-#define MXC_CSPICTRL_SSPOL (1 << 7)
+#define MXC_CSPICTRL_SSPOL (1 << 7)
#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 24)
#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0x1f) << 8)
#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index f8ea167..252b00e 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libusb.a
+LIB := $(obj)libusb.a
COBJS-y += isp116x-hcd.o
COBJS-y += sl811_usb.o
@@ -34,8 +34,8 @@ COBJS-y += usbdcore_mpc8xx.o
COBJS-y += usbdcore_omap1510.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/usb/isp116x-hcd.c b/drivers/usb/isp116x-hcd.c
index ac67030..6b9b23b 100644
--- a/drivers/usb/isp116x-hcd.c
+++ b/drivers/usb/isp116x-hcd.c
@@ -135,7 +135,7 @@ static int isp116x_reset(struct isp116x *isp116x);
r, isp116x_read_reg32(d, r)); \
} else { \
DBG("%-12s[%02x]: %04x", #r, \
- r, isp116x_read_reg16(d, r)); \
+ r, isp116x_read_reg16(d, r)); \
} \
}
diff --git a/drivers/usb/sl811_usb.c b/drivers/usb/sl811_usb.c
index c1f8427..159cc25 100644
--- a/drivers/usb/sl811_usb.c
+++ b/drivers/usb/sl811_usb.c
@@ -264,7 +264,7 @@ static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *b
ctrl &= ~SL811_USB_CTRL_SOF;
sl811_write(SL811_CTRL_A, ctrl);
- while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
+ while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
if (5*CFG_HZ < get_timer(time_start)) {
printf("USB transmit timed out\n");
return -USB_ST_CRC_ERR;
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0e40f2a..9d2f65b 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB := $(obj)libvideo.a
+LIB := $(obj)libvideo.a
COBJS-y += ati_radeon_fb.o
COBJS-y += cfb_console.o
@@ -36,8 +36,8 @@ COBJS-y += smiLynxEM.o
COBJS-y += videomodes.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
diff --git a/drivers/video/ati_radeon_fb.h b/drivers/video/ati_radeon_fb.h
index b5c4b8b..e981f95 100644
--- a/drivers/video/ati_radeon_fb.h
+++ b/drivers/video/ati_radeon_fb.h
@@ -47,20 +47,20 @@ struct radeonfb_info {
char name[20];
struct pci_device_id pdev;
- u16 family;
+ u16 family;
- u32 fb_base_phys;
- u32 mmio_base_phys;
+ u32 fb_base_phys;
+ u32 mmio_base_phys;
- void *mmio_base;
- void *fb_base;
+ void *mmio_base;
+ void *fb_base;
u32 video_ram;
u32 mapped_vram;
int vram_width;
int vram_ddr;
- u32 fb_local_base;
+ u32 fb_local_base;
};
#define INREG8(addr) readb((rinfo->mmio_base)+addr)
@@ -202,7 +202,7 @@ struct radeon_regs {
u32 crtc2_pitch;
/* Flat panel regs */
- u32 fp_crtc_h_total_disp;
+ u32 fp_crtc_h_total_disp;
u32 fp_crtc_v_total_disp;
u32 fp_gen_cntl;
u32 fp2_gen_cntl;
diff --git a/examples/sched.c b/examples/sched.c
index ae01e0b..b32766f 100644
--- a/examples/sched.c
+++ b/examples/sched.c
@@ -199,7 +199,7 @@ static void thread_yield (void)
PDEBUG ("thread_yield: current tid=%d", current_tid);
-#define SWITCH(new) \
+#define SWITCH(new) \
if(lthreads[new].state == STATE_RUNNABLE) { \
PDEBUG("thread_yield: %d match, ctx=0x%08x", \
new, \
@@ -207,11 +207,11 @@ static void thread_yield (void)
if(setjmp(lthreads[current_tid].context) == 0) { \
current_tid = new; \
PDEBUG("thread_yield: tid %d returns 0", \
- new); \
+ new); \
longjmp(lthreads[new].context, 1); \
} else { \
PDEBUG("thread_yield: tid %d returns 1", \
- new); \
+ new); \
return; \
} \
}
diff --git a/examples/smc91111_eeprom.c b/examples/smc91111_eeprom.c
index f5d8c6a..62347c7 100644
--- a/examples/smc91111_eeprom.c
+++ b/examples/smc91111_eeprom.c
@@ -41,7 +41,7 @@
#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
#define EEPROM 0x1;
#define MAC 0x2;
-#define UNKNOWN 0x4;
+#define UNKNOWN 0x4;
void dump_reg (void);
void dump_eeprom (void);
diff --git a/examples/timer.c b/examples/timer.c
index 13ec06f..6628b21 100644
--- a/examples/timer.c
+++ b/examples/timer.c
@@ -253,7 +253,7 @@ int timer (int argc, char *argv[])
);
#endif
} else {
- printf ("\nEnter: q - quit, b - start timer, e - stop timer, ? - get status\n");
+ printf ("\nEnter: q - quit, b - start timer, e - stop timer, ? - get status\n");
}
printf (usage);
}
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index a330438..1993dc2 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -52,7 +52,7 @@
* for a bootloader as small and simple as possible. Instead of worring about
* unneccesary data copies, node scans, etc, I just optimized for the known
* common case, a kernel, which looks like:
- * (1) most pages are 4096 bytes
+ * (1) most pages are 4096 bytes
* (2) version numbers are somewhat sorted in acsending order
* (3) multiple compressed blocks making up one page is uncommon
*
@@ -125,13 +125,13 @@
#include "jffs2_private.h"
-#define NODE_CHUNK 1024 /* size of memory allocation chunk in b_nodes */
-#define SPIN_BLKSIZE 18 /* spin after having scanned 1<<BLKSIZE bytes */
+#define NODE_CHUNK 1024 /* size of memory allocation chunk in b_nodes */
+#define SPIN_BLKSIZE 18 /* spin after having scanned 1<<BLKSIZE bytes */
/* Debugging switches */
#undef DEBUG_DIRENTS /* print directory entry list after scan */
#undef DEBUG_FRAGMENTS /* print fragment list after scan */
-#undef DEBUG /* enable debugging messages */
+#undef DEBUG /* enable debugging messages */
#ifdef DEBUG
@@ -741,7 +741,7 @@ jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
}
if (jDir->version == version && inode != 0) {
- /* I'm pretty sure this isn't legal */
+ /* I'm pretty sure this isn't legal */
putstr(" ** ERROR ** ");
putnstr(jDir->name, jDir->nsize);
putLabeledWord(" has dup version =", version);
@@ -959,13 +959,13 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
for(b = pL->dir.listHead; b; b = b->next) {
jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
if (ino == jDir->ino) {
- if (jDir->version < version) {
+ if (jDir->version < version) {
put_fl_mem(jDir);
continue;
}
if (jDir->version == version && jDirFoundType) {
- /* I'm pretty sure this isn't legal */
+ /* I'm pretty sure this isn't legal */
putstr(" ** ERROR ** ");
putnstr(jDir->name, jDir->nsize);
putLabeledWord(" has dup version (resolve) = ",
@@ -1151,7 +1151,7 @@ dump_dirents(struct b_lists *pL)
putLabeledWord("\tbuild_list: type = ", jDir->type);
putLabeledWord("\tbuild_list: node_crc = ", jDir->node_crc);
putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc);
- putLabeledWord("\tbuild_list: offset = ", b->offset); /* FIXME: ? [RS] */
+ putLabeledWord("\tbuild_list: offset = ", b->offset); /* FIXME: ? [RS] */
b = b->next;
put_fl_mem(jDir);
}
@@ -1183,7 +1183,7 @@ jffs2_1pass_build_lists(struct part_info * part)
/* start at the beginning of the partition */
while (offset < max) {
- if ((oldoffset >> SPIN_BLKSIZE) != (offset >> SPIN_BLKSIZE)) {
+ if ((oldoffset >> SPIN_BLKSIZE) != (offset >> SPIN_BLKSIZE)) {
printf("\b\b%c ", spinner[counter++ % sizeof(spinner)]);
oldoffset = offset;
}
diff --git a/fs/jffs2/jffs2_nand_1pass.c b/fs/jffs2/jffs2_nand_1pass.c
index 3a4c649..d95f551 100644
--- a/fs/jffs2/jffs2_nand_1pass.c
+++ b/fs/jffs2/jffs2_nand_1pass.c
@@ -758,7 +758,7 @@ dump_dirents(struct b_lists *pL)
putLabeledWord("\tbuild_list: type = ", jDir->type);
putLabeledWord("\tbuild_list: node_crc = ", jDir->node_crc);
putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc);
- putLabeledWord("\tbuild_list: offset = ", b->offset); /* FIXME: ? [RS] */
+ putLabeledWord("\tbuild_list: offset = ", b->offset); /* FIXME: ? [RS] */
b = b->next;
put_fl_mem(jDir);
}
diff --git a/fs/reiserfs/dev.c b/fs/reiserfs/dev.c
index 6b36c06..46dc414 100644
--- a/fs/reiserfs/dev.c
+++ b/fs/reiserfs/dev.c
@@ -35,7 +35,7 @@ int reiserfs_set_blk_dev(block_dev_desc_t *rbdd, int part)
reiserfs_block_dev_desc = rbdd;
if (part == 0) {
- /* disk doesn't use partition table */
+ /* disk doesn't use partition table */
part_info.start = 0;
part_info.size = rbdd->lba;
part_info.blksz = rbdd->blksz;
diff --git a/fs/reiserfs/mode_string.c b/fs/reiserfs/mode_string.c
index ae98834..3e57ee4 100644
--- a/fs/reiserfs/mode_string.c
+++ b/fs/reiserfs/mode_string.c
@@ -1,4 +1,3 @@
-/* vi: set sw=4 ts=4: */
/*
* mode_string implementation for busybox
*
diff --git a/fs/reiserfs/reiserfs_private.h b/fs/reiserfs/reiserfs_private.h
index d0197cb..ef7eaf0 100644
--- a/fs/reiserfs/reiserfs_private.h
+++ b/fs/reiserfs/reiserfs_private.h
@@ -44,37 +44,37 @@
/* This is the new super block of a journaling reiserfs system */
struct reiserfs_super_block
{
- __u32 s_block_count; /* blocks count */
- __u32 s_free_blocks; /* free blocks count */
- __u32 s_root_block; /* root block number */
- __u32 s_journal_block; /* journal block number */
- __u32 s_journal_dev; /* journal device number */
- __u32 s_journal_size; /* size of the journal on FS creation. used to make sure they don't overflow it */
- __u32 s_journal_trans_max; /* max number of blocks in a transaction. */
- __u32 s_journal_magic; /* random value made on fs creation */
- __u32 s_journal_max_batch; /* max number of blocks to batch into a trans */
- __u32 s_journal_max_commit_age; /* in seconds, how old can an async commit be */
- __u32 s_journal_max_trans_age; /* in seconds, how old can a transaction be */
- __u16 s_blocksize; /* block size */
- __u16 s_oid_maxsize; /* max size of object id array */
+ __u32 s_block_count; /* blocks count */
+ __u32 s_free_blocks; /* free blocks count */
+ __u32 s_root_block; /* root block number */
+ __u32 s_journal_block; /* journal block number */
+ __u32 s_journal_dev; /* journal device number */
+ __u32 s_journal_size; /* size of the journal on FS creation. used to make sure they don't overflow it */
+ __u32 s_journal_trans_max; /* max number of blocks in a transaction. */
+ __u32 s_journal_magic; /* random value made on fs creation */
+ __u32 s_journal_max_batch; /* max number of blocks to batch into a trans */
+ __u32 s_journal_max_commit_age; /* in seconds, how old can an async commit be */
+ __u32 s_journal_max_trans_age; /* in seconds, how old can a transaction be */
+ __u16 s_blocksize; /* block size */
+ __u16 s_oid_maxsize; /* max size of object id array */
__u16 s_oid_cursize; /* current size of object id array */
- __u16 s_state; /* valid or error */
- char s_magic[16]; /* reiserfs magic string indicates that file system is reiserfs */
- __u16 s_tree_height; /* height of disk tree */
- __u16 s_bmap_nr; /* amount of bitmap blocks needed to address each block of file system */
+ __u16 s_state; /* valid or error */
+ char s_magic[16]; /* reiserfs magic string indicates that file system is reiserfs */
+ __u16 s_tree_height; /* height of disk tree */
+ __u16 s_bmap_nr; /* amount of bitmap blocks needed to address each block of file system */
__u16 s_version;
char s_unused[128]; /* zero filled by mkreiserfs */
};
-#define sb_root_block(sbp) (__le32_to_cpu((sbp)->s_root_block))
-#define sb_journal_block(sbp) (__le32_to_cpu((sbp)->s_journal_block))
+#define sb_root_block(sbp) (__le32_to_cpu((sbp)->s_root_block))
+#define sb_journal_block(sbp) (__le32_to_cpu((sbp)->s_journal_block))
#define set_sb_journal_block(sbp,v) ((sbp)->s_journal_block = __cpu_to_le32(v))
-#define sb_journal_size(sbp) (__le32_to_cpu((sbp)->s_journal_size))
-#define sb_blocksize(sbp) (__le16_to_cpu((sbp)->s_blocksize))
+#define sb_journal_size(sbp) (__le32_to_cpu((sbp)->s_journal_size))
+#define sb_blocksize(sbp) (__le16_to_cpu((sbp)->s_blocksize))
#define set_sb_blocksize(sbp,v) ((sbp)->s_blocksize = __cpu_to_le16(v))
-#define sb_version(sbp) (__le16_to_cpu((sbp)->s_version))
-#define set_sb_version(sbp,v) ((sbp)->s_version = __cpu_to_le16(v))
+#define sb_version(sbp) (__le16_to_cpu((sbp)->s_version))
+#define set_sb_version(sbp,v) ((sbp)->s_version = __cpu_to_le16(v))
#define REISERFS_MAX_SUPPORTED_VERSION 2
@@ -137,7 +137,7 @@ struct offset_v1
* hashing the name and using few bits (23 or more) of the resulting
* hash, and generation number that allows distinguishing names with
* hash collisions. If number of collisions overflows generation
- * number, we return EEXIST. High order bit is 0 always
+ * number, we return EEXIST. High order bit is 0 always
*/
__u32 k_offset;
__u32 k_uniqueness;
@@ -153,7 +153,7 @@ struct offset_v2 {
* hashing the name and using few bits (23 or more) of the resulting
* hash, and generation number that allows distinguishing names with
* hash collisions. If number of collisions overflows generation
- * number, we return EEXIST. High order bit is 0 always
+ * number, we return EEXIST. High order bit is 0 always
*/
#if defined(__LITTLE_ENDIAN_BITFIELD)
@@ -192,8 +192,8 @@ static inline loff_t offset_v2_k_offset( const struct offset_v2 *v2 )
return tmp.offset_v2.k_offset;
}
#elif (__BYTE_ORDER == __LITTLE_ENDIAN)
-# define offset_v2_k_type(v2) ((v2)->k_type)
-# define offset_v2_k_offset(v2) ((v2)->k_offset)
+# define offset_v2_k_type(v2) ((v2)->k_type)
+# define offset_v2_k_offset(v2) ((v2)->k_offset)
#else
#error "__BYTE_ORDER must be __LITTLE_ENDIAN or __BIG_ENDIAN"
#endif
@@ -219,14 +219,14 @@ struct key
or internal node, and not the header of an unformatted node. */
struct block_head
{
- __u16 blk_level; /* Level of a block in the tree. */
- __u16 blk_nr_item; /* Number of keys/items in a block. */
+ __u16 blk_level; /* Level of a block in the tree. */
+ __u16 blk_nr_item; /* Number of keys/items in a block. */
__u16 blk_free_space; /* Block free space in bytes. */
struct key blk_right_delim_key; /* Right delimiting key for this block (supported for leaf level nodes
only) */
};
#define BLKH_SIZE (sizeof (struct block_head))
-#define DISK_LEAF_NODE_LEVEL 1 /* Leaf node level. */
+#define DISK_LEAF_NODE_LEVEL 1 /* Leaf node level. */
struct item_head
{
@@ -245,7 +245,7 @@ struct item_head
number of directory entries in the directory item. */
__u16 ih_entry_count;
} __attribute__ ((__packed__)) u;
- __u16 ih_item_len; /* total size of the item body */
+ __u16 ih_item_len; /* total size of the item body */
__u16 ih_item_location; /* an offset to the item body
* within the block */
__u16 ih_version; /* 0 for all old items, 2 for new
@@ -254,13 +254,13 @@ struct item_head
done */
} __attribute__ ((__packed__));
-/* size of item header */
+/* size of item header */
#define IH_SIZE (sizeof (struct item_head))
#define ITEM_VERSION_1 0
#define ITEM_VERSION_2 1
-#define ih_version(ih) (__le16_to_cpu((ih)->ih_version))
+#define ih_version(ih) (__le16_to_cpu((ih)->ih_version))
#define IH_KEY_OFFSET(ih) (ih_version(ih) == ITEM_VERSION_1 \
? __le32_to_cpu((ih)->ih_key.u.v1.k_offset) \
@@ -271,13 +271,13 @@ struct item_head
: offset_v2_k_type(&((ih)->ih_key.u.v2)) == V2_##type)
/***************************************************************************/
-/* DISK CHILD */
+/* DISK CHILD */
/***************************************************************************/
/* Disk child pointer: The pointer from an internal node of the tree
to a node that is on disk. */
struct disk_child {
- __u32 dc_block_number; /* Disk child's block number. */
- __u16 dc_size; /* Disk child's used space. */
+ __u32 dc_block_number; /* Disk child's block number. */
+ __u16 dc_size; /* Disk child's used space. */
__u16 dc_reserved;
};
@@ -297,7 +297,7 @@ struct stat_data_v1
__u16 sd_gid; /* group */
__u32 sd_size; /* file size */
__u32 sd_atime; /* time of last access */
- __u32 sd_mtime; /* time file was last modified */
+ __u32 sd_mtime; /* time file was last modified */
__u32 sd_ctime; /* time inode (stat data) was last changed (except changes to sd_atime and sd_mtime) */
union {
__u32 sd_rdev;
@@ -314,25 +314,25 @@ struct stat_data_v1
policy. Someday. -Hans */
} __attribute__ ((__packed__));
-#define stat_data_v1(ih) (ih_version(ih) == ITEM_VERSION_1)
-#define sd_v1_mode(sdp) ((sdp)->sd_mode)
-#define sd_v1_nlink(sdp) (__le16_to_cpu((sdp)->sd_nlink))
-#define sd_v1_uid(sdp) (__le16_to_cpu((sdp)->sd_uid))
-#define sd_v1_gid(sdp) (__le16_to_cpu((sdp)->sd_gid))
-#define sd_v1_size(sdp) (__le32_to_cpu((sdp)->sd_size))
-#define sd_v1_mtime(sdp) (__le32_to_cpu((sdp)->sd_mtime))
+#define stat_data_v1(ih) (ih_version(ih) == ITEM_VERSION_1)
+#define sd_v1_mode(sdp) ((sdp)->sd_mode)
+#define sd_v1_nlink(sdp) (__le16_to_cpu((sdp)->sd_nlink))
+#define sd_v1_uid(sdp) (__le16_to_cpu((sdp)->sd_uid))
+#define sd_v1_gid(sdp) (__le16_to_cpu((sdp)->sd_gid))
+#define sd_v1_size(sdp) (__le32_to_cpu((sdp)->sd_size))
+#define sd_v1_mtime(sdp) (__le32_to_cpu((sdp)->sd_mtime))
/* Stat Data on disk (reiserfs version of UFS disk inode minus the
address blocks) */
struct stat_data {
__u16 sd_mode; /* file type, permissions */
- __u16 sd_attrs; /* persistent inode flags */
+ __u16 sd_attrs; /* persistent inode flags */
__u32 sd_nlink; /* number of hard links */
__u64 sd_size; /* file size */
__u32 sd_uid; /* owner */
__u32 sd_gid; /* group */
__u32 sd_atime; /* time of last access */
- __u32 sd_mtime; /* time file was last modified */
+ __u32 sd_mtime; /* time file was last modified */
__u32 sd_ctime; /* time inode (stat data) was last changed (except changes to sd_atime and sd_mtime) */
__u32 sd_blocks;
union {
@@ -350,16 +350,16 @@ struct stat_data {
} __attribute__ ((__packed__)) u;
} __attribute__ ((__packed__));
-#define stat_data_v2(ih) (ih_version(ih) == ITEM_VERSION_2)
-#define sd_v2_mode(sdp) (__le16_to_cpu((sdp)->sd_mode))
-#define sd_v2_nlink(sdp) (__le32_to_cpu((sdp)->sd_nlink))
-#define sd_v2_size(sdp) (__le64_to_cpu((sdp)->sd_size))
-#define sd_v2_uid(sdp) (__le32_to_cpu((sdp)->sd_uid))
-#define sd_v2_gid(sdp) (__le32_to_cpu((sdp)->sd_gid))
-#define sd_v2_mtime(sdp) (__le32_to_cpu((sdp)->sd_mtime))
+#define stat_data_v2(ih) (ih_version(ih) == ITEM_VERSION_2)
+#define sd_v2_mode(sdp) (__le16_to_cpu((sdp)->sd_mode))
+#define sd_v2_nlink(sdp) (__le32_to_cpu((sdp)->sd_nlink))
+#define sd_v2_size(sdp) (__le64_to_cpu((sdp)->sd_size))
+#define sd_v2_uid(sdp) (__le32_to_cpu((sdp)->sd_uid))
+#define sd_v2_gid(sdp) (__le32_to_cpu((sdp)->sd_gid))
+#define sd_v2_mtime(sdp) (__le32_to_cpu((sdp)->sd_mtime))
-#define sd_mode(sdp) (__le16_to_cpu((sdp)->sd_mode))
-#define sd_size(sdp) (__le32_to_cpu((sdp)->sd_size))
+#define sd_mode(sdp) (__le16_to_cpu((sdp)->sd_mode))
+#define sd_size(sdp) (__le32_to_cpu((sdp)->sd_size))
#define sd_size_hi(sdp) (__le32_to_cpu((sdp)->sd_size_hi))
struct reiserfs_de_head
@@ -376,11 +376,11 @@ struct reiserfs_de_head
};
#define DEH_SIZE (sizeof (struct reiserfs_de_head))
-#define deh_offset(p_deh) (__le32_to_cpu((p_deh)->deh_offset))
-#define deh_dir_id(p_deh) (__le32_to_cpu((p_deh)->deh_dir_id))
-#define deh_objectid(p_deh) (__le32_to_cpu((p_deh)->deh_objectid))
-#define deh_location(p_deh) (__le16_to_cpu((p_deh)->deh_location))
-#define deh_state(p_deh) (__le16_to_cpu((p_deh)->deh_state))
+#define deh_offset(p_deh) (__le32_to_cpu((p_deh)->deh_offset))
+#define deh_dir_id(p_deh) (__le32_to_cpu((p_deh)->deh_dir_id))
+#define deh_objectid(p_deh) (__le32_to_cpu((p_deh)->deh_objectid))
+#define deh_location(p_deh) (__le16_to_cpu((p_deh)->deh_location))
+#define deh_state(p_deh) (__le16_to_cpu((p_deh)->deh_state))
#define DEH_Statdata (1 << 0) /* not used now */
@@ -413,7 +413,7 @@ struct reiserfs_de_head
#define S_ISLNK(mode) (((mode) & 0170000) == 0120000)
#define PATH_MAX 1024 /* include/linux/limits.h */
-#define MAX_LINK_COUNT 5 /* number of symbolic links to follow */
+#define MAX_LINK_COUNT 5 /* number of symbolic links to follow */
/* The size of the node cache */
#define FSYSREISER_CACHE_SIZE 24*1024
@@ -449,9 +449,9 @@ struct fsys_reiser_info
/* The current depth of the reiser tree. */
__u16 tree_depth;
/* SECTOR_SIZE << blocksize_shift == blocksize. */
- __u8 blocksize_shift;
+ __u8 blocksize_shift;
/* 1 << full_blocksize_shift == blocksize. */
- __u8 fullblocksize_shift;
+ __u8 fullblocksize_shift;
/* The reiserfs block size (must be a power of 2) */
__u16 blocksize;
/* The number of cached tree nodes */
@@ -466,14 +466,14 @@ struct fsys_reiser_info
/* The cached s+tree blocks in FSYS_BUF, see below
* for a more detailed description.
*/
-#define ROOT ((char *) ((int) FSYS_BUF))
+#define ROOT ((char *) ((int) FSYS_BUF))
#define CACHE(i) (ROOT + ((i) << INFO->fullblocksize_shift))
-#define LEAF CACHE (DISK_LEAF_NODE_LEVEL)
+#define LEAF CACHE (DISK_LEAF_NODE_LEVEL)
#define BLOCKHEAD(cache) ((struct block_head *) cache)
-#define ITEMHEAD ((struct item_head *) ((int) LEAF + BLKH_SIZE))
-#define KEY(cache) ((struct key *) ((int) cache + BLKH_SIZE))
-#define DC(cache) ((struct disk_child *) \
+#define ITEMHEAD ((struct item_head *) ((int) LEAF + BLKH_SIZE))
+#define KEY(cache) ((struct key *) ((int) cache + BLKH_SIZE))
+#define DC(cache) ((struct disk_child *) \
((int) cache + BLKH_SIZE + KEY_SIZE * nr_item))
/* The fsys_reiser_info block.
*/
@@ -487,8 +487,8 @@ struct fsys_reiser_info
* this list is stopped with a 0xffffffff marker and the remaining
* uncommitted transactions aren't cached.
*/
-#define JOURNAL_START ((__u32 *) (INFO + 1))
-#define JOURNAL_END ((__u32 *) (FSYS_BUF + FSYS_BUFLEN))
+#define JOURNAL_START ((__u32 *) (INFO + 1))
+#define JOURNAL_END ((__u32 *) (FSYS_BUF + FSYS_BUFLEN))
static __inline__ unsigned long
diff --git a/include/ACEX1K.h b/include/ACEX1K.h
index f249d64..6ea0eed 100644
--- a/include/ACEX1K.h
+++ b/include/ACEX1K.h
@@ -73,9 +73,9 @@ typedef struct {
* Filesize of an *.rbf file is 166965 Bytes
*/
#if 0
-#define Altera_EP1K100_SIZE 1337000/8 /* 167125 Bytes */
+#define Altera_EP1K100_SIZE 1337000/8 /* 167125 Bytes */
#endif
-#define Altera_EP1K100_SIZE (166965*8)
+#define Altera_EP1K100_SIZE (166965*8)
#define Altera_EP2C35_SIZE 883905
diff --git a/include/SA-1100.h b/include/SA-1100.h
index 9985783..7589df2 100644
--- a/include/SA-1100.h
+++ b/include/SA-1100.h
@@ -1,20 +1,20 @@
/*
- * FILE SA-1100.h
+ * FILE SA-1100.h
*
- * Version 1.2
- * Author Copyright (c) Marc A. Viredaz, 1998
- * DEC Western Research Laboratory, Palo Alto, CA
- * Date January 1998 (April 1997)
- * System StrongARM SA-1100
+ * Version 1.2
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date January 1998 (April 1997)
+ * System StrongARM SA-1100
* Language C or ARM Assembly
- * Purpose Definition of constants related to the StrongARM
- * SA-1100 microprocessor (Advanced RISC Machine (ARM)
- * architecture version 4). This file is based on the
- * StrongARM SA-1100 data sheet version 2.2.
+ * Purpose Definition of constants related to the StrongARM
+ * SA-1100 microprocessor (Advanced RISC Machine (ARM)
+ * architecture version 4). This file is based on the
+ * StrongARM SA-1100 data sheet version 2.2.
*
- * Language-specific definitions are selected by the
- * macro "LANGUAGE", which should be defined as either
- * "C" (default) or "Assembly".
+ * Language-specific definitions are selected by the
+ * macro "LANGUAGE", which should be defined as either
+ * "C" (default) or "Assembly".
*/
@@ -32,17 +32,17 @@
#include <asm/arch-sa1100/bitfield.h>
-#define C 0
+#define C 0
#define Assembly 1
#if LANGUAGE == C
-typedef unsigned short Word16 ;
-typedef unsigned int Word32 ;
-typedef Word32 Word ;
-typedef Word Quad [4] ;
-typedef void *Address ;
-typedef void (*ExcpHndlr) (void) ;
+typedef unsigned short Word16 ;
+typedef unsigned int Word32 ;
+typedef Word32 Word ;
+typedef Word Quad [4] ;
+typedef void *Address ;
+typedef void (*ExcpHndlr) (void) ;
#endif /* LANGUAGE == C */
@@ -50,65 +50,65 @@ typedef void (*ExcpHndlr) (void) ;
* Memory
*/
-#define MemBnkSp 0x08000000 /* Memory Bank Space [byte] */
+#define MemBnkSp 0x08000000 /* Memory Bank Space [byte] */
#define StMemBnkSp MemBnkSp /* Static Memory Bank Space [byte] */
-#define StMemBnk0Sp StMemBnkSp /* Static Memory Bank 0 Space */
- /* [byte] */
-#define StMemBnk1Sp StMemBnkSp /* Static Memory Bank 1 Space */
- /* [byte] */
-#define StMemBnk2Sp StMemBnkSp /* Static Memory Bank 2 Space */
- /* [byte] */
-#define StMemBnk3Sp StMemBnkSp /* Static Memory Bank 3 Space */
- /* [byte] */
-
-#define DRAMBnkSp MemBnkSp /* DRAM Bank Space [byte] */
-#define DRAMBnk0Sp DRAMBnkSp /* DRAM Bank 0 Space [byte] */
-#define DRAMBnk1Sp DRAMBnkSp /* DRAM Bank 1 Space [byte] */
-#define DRAMBnk2Sp DRAMBnkSp /* DRAM Bank 2 Space [byte] */
-#define DRAMBnk3Sp DRAMBnkSp /* DRAM Bank 3 Space [byte] */
+#define StMemBnk0Sp StMemBnkSp /* Static Memory Bank 0 Space */
+ /* [byte] */
+#define StMemBnk1Sp StMemBnkSp /* Static Memory Bank 1 Space */
+ /* [byte] */
+#define StMemBnk2Sp StMemBnkSp /* Static Memory Bank 2 Space */
+ /* [byte] */
+#define StMemBnk3Sp StMemBnkSp /* Static Memory Bank 3 Space */
+ /* [byte] */
+
+#define DRAMBnkSp MemBnkSp /* DRAM Bank Space [byte] */
+#define DRAMBnk0Sp DRAMBnkSp /* DRAM Bank 0 Space [byte] */
+#define DRAMBnk1Sp DRAMBnkSp /* DRAM Bank 1 Space [byte] */
+#define DRAMBnk2Sp DRAMBnkSp /* DRAM Bank 2 Space [byte] */
+#define DRAMBnk3Sp DRAMBnkSp /* DRAM Bank 3 Space [byte] */
#define ZeroMemSp MemBnkSp /* Zero Memory bank Space [byte] */
-#define _StMemBnk(Nb) /* Static Memory Bank [0..3] */ \
+#define _StMemBnk(Nb) /* Static Memory Bank [0..3] */ \
(0x00000000 + (Nb)*StMemBnkSp)
-#define _StMemBnk0 _StMemBnk (0) /* Static Memory Bank 0 */
-#define _StMemBnk1 _StMemBnk (1) /* Static Memory Bank 1 */
-#define _StMemBnk2 _StMemBnk (2) /* Static Memory Bank 2 */
-#define _StMemBnk3 _StMemBnk (3) /* Static Memory Bank 3 */
+#define _StMemBnk0 _StMemBnk (0) /* Static Memory Bank 0 */
+#define _StMemBnk1 _StMemBnk (1) /* Static Memory Bank 1 */
+#define _StMemBnk2 _StMemBnk (2) /* Static Memory Bank 2 */
+#define _StMemBnk3 _StMemBnk (3) /* Static Memory Bank 3 */
#if LANGUAGE == C
-typedef Quad StMemBnkType [StMemBnkSp/sizeof (Quad)] ;
-#define StMemBnk /* Static Memory Bank [0..3] */ \
+typedef Quad StMemBnkType [StMemBnkSp/sizeof (Quad)] ;
+#define StMemBnk /* Static Memory Bank [0..3] */ \
((StMemBnkType *) io_p2v (_StMemBnk (0)))
-#define StMemBnk0 (StMemBnk [0]) /* Static Memory Bank 0 */
-#define StMemBnk1 (StMemBnk [1]) /* Static Memory Bank 1 */
-#define StMemBnk2 (StMemBnk [2]) /* Static Memory Bank 2 */
-#define StMemBnk3 (StMemBnk [3]) /* Static Memory Bank 3 */
+#define StMemBnk0 (StMemBnk [0]) /* Static Memory Bank 0 */
+#define StMemBnk1 (StMemBnk [1]) /* Static Memory Bank 1 */
+#define StMemBnk2 (StMemBnk [2]) /* Static Memory Bank 2 */
+#define StMemBnk3 (StMemBnk [3]) /* Static Memory Bank 3 */
#endif /* LANGUAGE == C */
-#define _DRAMBnk(Nb) /* DRAM Bank [0..3] */ \
+#define _DRAMBnk(Nb) /* DRAM Bank [0..3] */ \
(0xC0000000 + (Nb)*DRAMBnkSp)
-#define _DRAMBnk0 _DRAMBnk (0) /* DRAM Bank 0 */
-#define _DRAMBnk1 _DRAMBnk (1) /* DRAM Bank 1 */
-#define _DRAMBnk2 _DRAMBnk (2) /* DRAM Bank 2 */
-#define _DRAMBnk3 _DRAMBnk (3) /* DRAM Bank 3 */
+#define _DRAMBnk0 _DRAMBnk (0) /* DRAM Bank 0 */
+#define _DRAMBnk1 _DRAMBnk (1) /* DRAM Bank 1 */
+#define _DRAMBnk2 _DRAMBnk (2) /* DRAM Bank 2 */
+#define _DRAMBnk3 _DRAMBnk (3) /* DRAM Bank 3 */
#if LANGUAGE == C
-typedef Quad DRAMBnkType [DRAMBnkSp/sizeof (Quad)] ;
-#define DRAMBnk /* DRAM Bank [0..3] */ \
+typedef Quad DRAMBnkType [DRAMBnkSp/sizeof (Quad)] ;
+#define DRAMBnk /* DRAM Bank [0..3] */ \
((DRAMBnkType *) io_p2v (_DRAMBnk (0)))
-#define DRAMBnk0 (DRAMBnk [0]) /* DRAM Bank 0 */
-#define DRAMBnk1 (DRAMBnk [1]) /* DRAM Bank 1 */
-#define DRAMBnk2 (DRAMBnk [2]) /* DRAM Bank 2 */
-#define DRAMBnk3 (DRAMBnk [3]) /* DRAM Bank 3 */
+#define DRAMBnk0 (DRAMBnk [0]) /* DRAM Bank 0 */
+#define DRAMBnk1 (DRAMBnk [1]) /* DRAM Bank 1 */
+#define DRAMBnk2 (DRAMBnk [2]) /* DRAM Bank 2 */
+#define DRAMBnk3 (DRAMBnk [3]) /* DRAM Bank 3 */
#endif /* LANGUAGE == C */
-#define _ZeroMem 0xE0000000 /* Zero Memory bank */
+#define _ZeroMem 0xE0000000 /* Zero Memory bank */
#if LANGUAGE == C
-typedef Quad ZeroMemType [ZeroMemSp/sizeof (Quad)] ;
-#define ZeroMem /* Zero Memory bank */ \
+typedef Quad ZeroMemType [ZeroMemSp/sizeof (Quad)] ;
+#define ZeroMem /* Zero Memory bank */ \
(*((ZeroMemType *) io_p2v (_ZeroMem)))
#endif /* LANGUAGE == C */
@@ -118,60 +118,60 @@ typedef Quad ZeroMemType [ZeroMemSp/sizeof (Quad)] ;
*/
#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
-#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
-#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
-#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
-#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
-#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
-#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
-#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
-#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
(0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
-#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
-#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
-#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
-#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
+#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
-#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
-#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
-#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
-#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
#if LANGUAGE == C
-typedef Quad PCMCIAPrtType [PCMCIAPrtSp/sizeof (Quad)] ;
+typedef Quad PCMCIAPrtType [PCMCIAPrtSp/sizeof (Quad)] ;
typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
-#define PCMCIA0 /* PCMCIA 0 */ \
+#define PCMCIA0 /* PCMCIA 0 */ \
(*((PCMCIAType *) io_p2v (_PCMCIA0)))
-#define PCMCIA0IO /* PCMCIA 0 I/O */ \
+#define PCMCIA0IO /* PCMCIA 0 I/O */ \
(*((PCMCIAPrtType *) io_p2v (_PCMCIA0IO)))
-#define PCMCIA0Attr /* PCMCIA 0 Attribute */ \
+#define PCMCIA0Attr /* PCMCIA 0 Attribute */ \
(*((PCMCIAPrtType *) io_p2v (_PCMCIA0Attr)))
-#define PCMCIA0Mem /* PCMCIA 0 Memory */ \
+#define PCMCIA0Mem /* PCMCIA 0 Memory */ \
(*((PCMCIAPrtType *) io_p2v (_PCMCIA0Mem)))
-#define PCMCIA1 /* PCMCIA 1 */ \
+#define PCMCIA1 /* PCMCIA 1 */ \
(*((PCMCIAType *) io_p2v (_PCMCIA1)))
-#define PCMCIA1IO /* PCMCIA 1 I/O */ \
+#define PCMCIA1IO /* PCMCIA 1 I/O */ \
(*((PCMCIAPrtType *) io_p2v (_PCMCIA1IO)))
-#define PCMCIA1Attr /* PCMCIA 1 Attribute */ \
+#define PCMCIA1Attr /* PCMCIA 1 Attribute */ \
(*((PCMCIAPrtType *) io_p2v (_PCMCIA1Attr)))
-#define PCMCIA1Mem /* PCMCIA 1 Memory */ \
+#define PCMCIA1Mem /* PCMCIA 1 Memory */ \
(*((PCMCIAPrtType *) io_p2v (_PCMCIA1Mem)))
#endif /* LANGUAGE == C */
@@ -181,254 +181,254 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* Universal Serial Bus (USB) Device Controller (UDC) control registers
*
* Registers
- * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Control Register (read/write).
- * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Address Register (read/write).
+ * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control Register (read/write).
+ * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Address Register (read/write).
* Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Output Maximum Packet size register
- * (read/write).
+ * Controller (UDC) Output Maximum Packet size register
+ * (read/write).
* Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Input Maximum Packet size register
- * (read/write).
+ * Controller (UDC) Input Maximum Packet size register
+ * (read/write).
* Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Control/Status register end-point 0
- * (read/write).
+ * Controller (UDC) Control/Status register end-point 0
+ * (read/write).
* Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Control/Status register end-point 1
- * (output, read/write).
+ * Controller (UDC) Control/Status register end-point 1
+ * (output, read/write).
* Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Control/Status register end-point 2
- * (input, read/write).
- * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Data register end-point 0
- * (read/write).
- * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Write Count register end-point 0
- * (read).
- * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Data Register (read/write).
- * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Status Register (read/write).
+ * Controller (UDC) Control/Status register end-point 2
+ * (input, read/write).
+ * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Data register end-point 0
+ * (read/write).
+ * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Write Count register end-point 0
+ * (read).
+ * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Data Register (read/write).
+ * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Status Register (read/write).
*/
#define _Ser0UDCCR 0x80000000 /* Ser. port 0 UDC Control Reg. */
#define _Ser0UDCAR 0x80000004 /* Ser. port 0 UDC Address Reg. */
#define _Ser0UDCOMP 0x80000008 /* Ser. port 0 UDC Output Maximum */
- /* Packet size reg. */
+ /* Packet size reg. */
#define _Ser0UDCIMP 0x8000000C /* Ser. port 0 UDC Input Maximum */
- /* Packet size reg. */
+ /* Packet size reg. */
#define _Ser0UDCCS0 0x80000010 /* Ser. port 0 UDC Control/Status */
- /* reg. end-point 0 */
+ /* reg. end-point 0 */
#define _Ser0UDCCS1 0x80000014 /* Ser. port 0 UDC Control/Status */
- /* reg. end-point 1 (output) */
+ /* reg. end-point 1 (output) */
#define _Ser0UDCCS2 0x80000018 /* Ser. port 0 UDC Control/Status */
- /* reg. end-point 2 (input) */
-#define _Ser0UDCD0 0x8000001C /* Ser. port 0 UDC Data reg. */
- /* end-point 0 */
-#define _Ser0UDCWC 0x80000020 /* Ser. port 0 UDC Write Count */
- /* reg. end-point 0 */
-#define _Ser0UDCDR 0x80000028 /* Ser. port 0 UDC Data Reg. */
-#define _Ser0UDCSR 0x80000030 /* Ser. port 0 UDC Status Reg. */
+ /* reg. end-point 2 (input) */
+#define _Ser0UDCD0 0x8000001C /* Ser. port 0 UDC Data reg. */
+ /* end-point 0 */
+#define _Ser0UDCWC 0x80000020 /* Ser. port 0 UDC Write Count */
+ /* reg. end-point 0 */
+#define _Ser0UDCDR 0x80000028 /* Ser. port 0 UDC Data Reg. */
+#define _Ser0UDCSR 0x80000030 /* Ser. port 0 UDC Status Reg. */
#if LANGUAGE == C
-#define Ser0UDCCR /* Ser. port 0 UDC Control Reg. */ \
+#define Ser0UDCCR /* Ser. port 0 UDC Control Reg. */ \
(*((volatile Word *) io_p2v (_Ser0UDCCR)))
-#define Ser0UDCAR /* Ser. port 0 UDC Address Reg. */ \
+#define Ser0UDCAR /* Ser. port 0 UDC Address Reg. */ \
(*((volatile Word *) io_p2v (_Ser0UDCAR)))
-#define Ser0UDCOMP /* Ser. port 0 UDC Output Maximum */ \
- /* Packet size reg. */ \
+#define Ser0UDCOMP /* Ser. port 0 UDC Output Maximum */ \
+ /* Packet size reg. */ \
(*((volatile Word *) io_p2v (_Ser0UDCOMP)))
-#define Ser0UDCIMP /* Ser. port 0 UDC Input Maximum */ \
- /* Packet size reg. */ \
+#define Ser0UDCIMP /* Ser. port 0 UDC Input Maximum */ \
+ /* Packet size reg. */ \
(*((volatile Word *) io_p2v (_Ser0UDCIMP)))
-#define Ser0UDCCS0 /* Ser. port 0 UDC Control/Status */ \
- /* reg. end-point 0 */ \
+#define Ser0UDCCS0 /* Ser. port 0 UDC Control/Status */ \
+ /* reg. end-point 0 */ \
(*((volatile Word *) io_p2v (_Ser0UDCCS0)))
-#define Ser0UDCCS1 /* Ser. port 0 UDC Control/Status */ \
- /* reg. end-point 1 (output) */ \
+#define Ser0UDCCS1 /* Ser. port 0 UDC Control/Status */ \
+ /* reg. end-point 1 (output) */ \
(*((volatile Word *) io_p2v (_Ser0UDCCS1)))
-#define Ser0UDCCS2 /* Ser. port 0 UDC Control/Status */ \
- /* reg. end-point 2 (input) */ \
+#define Ser0UDCCS2 /* Ser. port 0 UDC Control/Status */ \
+ /* reg. end-point 2 (input) */ \
(*((volatile Word *) io_p2v (_Ser0UDCCS2)))
-#define Ser0UDCD0 /* Ser. port 0 UDC Data reg. */ \
- /* end-point 0 */ \
+#define Ser0UDCD0 /* Ser. port 0 UDC Data reg. */ \
+ /* end-point 0 */ \
(*((volatile Word *) io_p2v (_Ser0UDCD0)))
-#define Ser0UDCWC /* Ser. port 0 UDC Write Count */ \
- /* reg. end-point 0 */ \
+#define Ser0UDCWC /* Ser. port 0 UDC Write Count */ \
+ /* reg. end-point 0 */ \
(*((volatile Word *) io_p2v (_Ser0UDCWC)))
-#define Ser0UDCDR /* Ser. port 0 UDC Data Reg. */ \
+#define Ser0UDCDR /* Ser. port 0 UDC Data Reg. */ \
(*((volatile Word *) io_p2v (_Ser0UDCDR)))
-#define Ser0UDCSR /* Ser. port 0 UDC Status Reg. */ \
+#define Ser0UDCSR /* Ser. port 0 UDC Status Reg. */ \
(*((volatile Word *) io_p2v (_Ser0UDCSR)))
#endif /* LANGUAGE == C */
-#define UDCCR_UDD 0x00000001 /* UDC Disable */
-#define UDCCR_UDA 0x00000002 /* UDC Active (read) */
+#define UDCCR_UDD 0x00000001 /* UDC Disable */
+#define UDCCR_UDA 0x00000002 /* UDC Active (read) */
#define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */
-#define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */
- /* (disable) */
-#define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */
- /* (disable) */
-#define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */
- /* (disable) */
+#define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */
+ /* (disable) */
+#define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */
+ /* (disable) */
+#define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */
+ /* (disable) */
#define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */
- /* (disable) */
+ /* (disable) */
#define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */
#define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */
-#define UDCAR_ADD Fld (7, 0) /* function ADDress */
+#define UDCAR_ADD Fld (7, 0) /* function ADDress */
#define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */
- /* [byte] */
-#define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \
- /* [1..256 byte] */ \
+ /* [byte] */
+#define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \
+ /* [1..256 byte] */ \
(((Size) - 1) << FShft (UDCOMP_OUTMAXP))
#define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */
- /* [byte] */
-#define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \
- /* [1..256 byte] */ \
+ /* [byte] */
+#define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \
+ /* [1..256 byte] */ \
(((Size) - 1) << FShft (UDCIMP_INMAXP))
-#define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */
-#define UDCCS0_IPR 0x00000002 /* Input Packet Ready */
-#define UDCCS0_SST 0x00000004 /* Sent STall */
-#define UDCCS0_FST 0x00000008 /* Force STall */
-#define UDCCS0_DE 0x00000010 /* Data End */
-#define UDCCS0_SE 0x00000020 /* Setup End (read) */
+#define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */
+#define UDCCS0_IPR 0x00000002 /* Input Packet Ready */
+#define UDCCS0_SST 0x00000004 /* Sent STall */
+#define UDCCS0_FST 0x00000008 /* Force STall */
+#define UDCCS0_DE 0x00000010 /* Data End */
+#define UDCCS0_SE 0x00000020 /* Setup End (read) */
#define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */
- /* (write) */
-#define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */
+ /* (write) */
+#define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */
#define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */
- /* Service request (read) */
-#define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */
-#define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */
-#define UDCCS1_SST 0x00000008 /* Sent STall */
-#define UDCCS1_FST 0x00000010 /* Force STall */
+ /* Service request (read) */
+#define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */
+#define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */
+#define UDCCS1_SST 0x00000008 /* Sent STall */
+#define UDCCS1_FST 0x00000010 /* Force STall */
#define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */
#define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */
- /* Service request (read) */
-#define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */
+ /* Service request (read) */
+#define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */
#define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */
-#define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */
-#define UDCCS2_SST 0x00000010 /* Sent STall */
-#define UDCCS2_FST 0x00000020 /* Force STall */
+#define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */
+#define UDCCS2_SST 0x00000010 /* Sent STall */
+#define UDCCS2_FST 0x00000020 /* Force STall */
-#define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-#define UDCWC_WC Fld (4, 0) /* Write Count */
+#define UDCWC_WC Fld (4, 0) /* Write Count */
-#define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
#define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */
-#define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */
-#define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */
-#define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */
-#define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */
-#define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */
+#define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */
+#define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */
+#define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */
+#define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */
+#define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */
/*
* Universal Asynchronous Receiver/Transmitter (UART) control registers
*
* Registers
- * Ser1UTCR0 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 0
- * (read/write).
- * Ser1UTCR1 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 1
- * (read/write).
- * Ser1UTCR2 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 2
- * (read/write).
- * Ser1UTCR3 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 3
- * (read/write).
- * Ser1UTDR Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Data Register
- * (read/write).
- * Ser1UTSR0 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 0
- * (read/write).
- * Ser1UTSR1 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 1 (read).
+ * Ser1UTCR0 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser1UTCR1 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser1UTCR2 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser1UTCR3 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser1UTDR Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser1UTSR0 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser1UTSR1 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
*
- * Ser2UTCR0 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 0
- * (read/write).
- * Ser2UTCR1 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 1
- * (read/write).
- * Ser2UTCR2 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 2
- * (read/write).
- * Ser2UTCR3 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 3
- * (read/write).
- * Ser2UTCR4 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 4
- * (read/write).
- * Ser2UTDR Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Data Register
- * (read/write).
- * Ser2UTSR0 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 0
- * (read/write).
- * Ser2UTSR1 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 1 (read).
+ * Ser2UTCR0 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser2UTCR1 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser2UTCR2 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser2UTCR3 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser2UTCR4 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 4
+ * (read/write).
+ * Ser2UTDR Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser2UTSR0 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser2UTSR1 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
*
- * Ser3UTCR0 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 0
- * (read/write).
- * Ser3UTCR1 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 1
- * (read/write).
- * Ser3UTCR2 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 2
- * (read/write).
- * Ser3UTCR3 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 3
- * (read/write).
- * Ser3UTDR Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Data Register
- * (read/write).
- * Ser3UTSR0 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 0
- * (read/write).
- * Ser3UTSR1 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 1 (read).
+ * Ser3UTCR0 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser3UTCR1 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser3UTCR2 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser3UTCR3 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser3UTDR Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser3UTSR0 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser3UTSR1 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
*
* Clocks
* fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
- * or 3.5795 MHz).
- * fua, Tua Frequency, period of the UART communication.
+ * or 3.5795 MHz).
+ * fua, Tua Frequency, period of the UART communication.
*/
-#define _UTCR0(Nb) /* UART Control Reg. 0 [1..3] */ \
+#define _UTCR0(Nb) /* UART Control Reg. 0 [1..3] */ \
(0x80010000 + ((Nb) - 1)*0x00020000)
-#define _UTCR1(Nb) /* UART Control Reg. 1 [1..3] */ \
+#define _UTCR1(Nb) /* UART Control Reg. 1 [1..3] */ \
(0x80010004 + ((Nb) - 1)*0x00020000)
-#define _UTCR2(Nb) /* UART Control Reg. 2 [1..3] */ \
+#define _UTCR2(Nb) /* UART Control Reg. 2 [1..3] */ \
(0x80010008 + ((Nb) - 1)*0x00020000)
-#define _UTCR3(Nb) /* UART Control Reg. 3 [1..3] */ \
+#define _UTCR3(Nb) /* UART Control Reg. 3 [1..3] */ \
(0x8001000C + ((Nb) - 1)*0x00020000)
-#define _UTCR4(Nb) /* UART Control Reg. 4 [2] */ \
+#define _UTCR4(Nb) /* UART Control Reg. 4 [2] */ \
(0x80010010 + ((Nb) - 1)*0x00020000)
-#define _UTDR(Nb) /* UART Data Reg. [1..3] */ \
+#define _UTDR(Nb) /* UART Data Reg. [1..3] */ \
(0x80010014 + ((Nb) - 1)*0x00020000)
-#define _UTSR0(Nb) /* UART Status Reg. 0 [1..3] */ \
+#define _UTSR0(Nb) /* UART Status Reg. 0 [1..3] */ \
(0x8001001C + ((Nb) - 1)*0x00020000)
-#define _UTSR1(Nb) /* UART Status Reg. 1 [1..3] */ \
+#define _UTSR1(Nb) /* UART Status Reg. 1 [1..3] */ \
(0x80010020 + ((Nb) - 1)*0x00020000)
#define _Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */
#define _Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */
#define _Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */
#define _Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */
-#define _Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */
+#define _Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */
#define _Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */
#define _Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */
@@ -437,7 +437,7 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
#define _Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */
#define _Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */
#define _Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */
-#define _Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */
+#define _Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */
#define _Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */
#define _Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */
@@ -445,57 +445,57 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
#define _Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */
#define _Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */
#define _Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */
-#define _Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */
+#define _Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */
#define _Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */
#define _Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */
#if LANGUAGE == C
-#define Ser1UTCR0 /* Ser. port 1 UART Control Reg. 0 */ \
+#define Ser1UTCR0 /* Ser. port 1 UART Control Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser1UTCR0)))
-#define Ser1UTCR1 /* Ser. port 1 UART Control Reg. 1 */ \
+#define Ser1UTCR1 /* Ser. port 1 UART Control Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser1UTCR1)))
-#define Ser1UTCR2 /* Ser. port 1 UART Control Reg. 2 */ \
+#define Ser1UTCR2 /* Ser. port 1 UART Control Reg. 2 */ \
(*((volatile Word *) io_p2v (_Ser1UTCR2)))
-#define Ser1UTCR3 /* Ser. port 1 UART Control Reg. 3 */ \
+#define Ser1UTCR3 /* Ser. port 1 UART Control Reg. 3 */ \
(*((volatile Word *) io_p2v (_Ser1UTCR3)))
-#define Ser1UTDR /* Ser. port 1 UART Data Reg. */ \
+#define Ser1UTDR /* Ser. port 1 UART Data Reg. */ \
(*((volatile Word *) io_p2v (_Ser1UTDR)))
-#define Ser1UTSR0 /* Ser. port 1 UART Status Reg. 0 */ \
+#define Ser1UTSR0 /* Ser. port 1 UART Status Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser1UTSR0)))
-#define Ser1UTSR1 /* Ser. port 1 UART Status Reg. 1 */ \
+#define Ser1UTSR1 /* Ser. port 1 UART Status Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser1UTSR1)))
-#define Ser2UTCR0 /* Ser. port 2 UART Control Reg. 0 */ \
+#define Ser2UTCR0 /* Ser. port 2 UART Control Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser2UTCR0)))
-#define Ser2UTCR1 /* Ser. port 2 UART Control Reg. 1 */ \
+#define Ser2UTCR1 /* Ser. port 2 UART Control Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser2UTCR1)))
-#define Ser2UTCR2 /* Ser. port 2 UART Control Reg. 2 */ \
+#define Ser2UTCR2 /* Ser. port 2 UART Control Reg. 2 */ \
(*((volatile Word *) io_p2v (_Ser2UTCR2)))
-#define Ser2UTCR3 /* Ser. port 2 UART Control Reg. 3 */ \
+#define Ser2UTCR3 /* Ser. port 2 UART Control Reg. 3 */ \
(*((volatile Word *) io_p2v (_Ser2UTCR3)))
-#define Ser2UTCR4 /* Ser. port 2 UART Control Reg. 4 */ \
+#define Ser2UTCR4 /* Ser. port 2 UART Control Reg. 4 */ \
(*((volatile Word *) io_p2v (_Ser2UTCR4)))
-#define Ser2UTDR /* Ser. port 2 UART Data Reg. */ \
+#define Ser2UTDR /* Ser. port 2 UART Data Reg. */ \
(*((volatile Word *) io_p2v (_Ser2UTDR)))
-#define Ser2UTSR0 /* Ser. port 2 UART Status Reg. 0 */ \
+#define Ser2UTSR0 /* Ser. port 2 UART Status Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser2UTSR0)))
-#define Ser2UTSR1 /* Ser. port 2 UART Status Reg. 1 */ \
+#define Ser2UTSR1 /* Ser. port 2 UART Status Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser2UTSR1)))
-#define Ser3UTCR0 /* Ser. port 3 UART Control Reg. 0 */ \
+#define Ser3UTCR0 /* Ser. port 3 UART Control Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser3UTCR0)))
-#define Ser3UTCR1 /* Ser. port 3 UART Control Reg. 1 */ \
+#define Ser3UTCR1 /* Ser. port 3 UART Control Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser3UTCR1)))
-#define Ser3UTCR2 /* Ser. port 3 UART Control Reg. 2 */ \
+#define Ser3UTCR2 /* Ser. port 3 UART Control Reg. 2 */ \
(*((volatile Word *) io_p2v (_Ser3UTCR2)))
-#define Ser3UTCR3 /* Ser. port 3 UART Control Reg. 3 */ \
+#define Ser3UTCR3 /* Ser. port 3 UART Control Reg. 3 */ \
(*((volatile Word *) io_p2v (_Ser3UTCR3)))
-#define Ser3UTDR /* Ser. port 3 UART Data Reg. */ \
+#define Ser3UTDR /* Ser. port 3 UART Data Reg. */ \
(*((volatile Word *) io_p2v (_Ser3UTDR)))
-#define Ser3UTSR0 /* Ser. port 3 UART Status Reg. 0 */ \
+#define Ser3UTSR0 /* Ser. port 3 UART Status Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser3UTSR0)))
-#define Ser3UTSR1 /* Ser. port 3 UART Status Reg. 1 */ \
+#define Ser3UTSR1 /* Ser. port 3 UART Status Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser3UTSR1)))
#elif LANGUAGE == Assembly
@@ -526,89 +526,89 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
#endif /* LANGUAGE == C */
-#define UTCR0_PE 0x00000001 /* Parity Enable */
-#define UTCR0_OES 0x00000002 /* Odd/Even parity Select */
-#define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */
-#define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */
-#define UTCR0_SBS 0x00000004 /* Stop Bit Select */
-#define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */
-#define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */
-#define UTCR0_DSS 0x00000008 /* Data Size Select */
-#define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */
-#define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */
-#define UTCR0_SCE 0x00000010 /* Sample Clock Enable */
- /* (ser. port 1: GPIO [18], */
- /* ser. port 3: GPIO [20]) */
-#define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */
-#define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */
-#define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */
-#define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */
-#define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */
+#define UTCR0_PE 0x00000001 /* Parity Enable */
+#define UTCR0_OES 0x00000002 /* Odd/Even parity Select */
+#define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */
+#define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */
+#define UTCR0_SBS 0x00000004 /* Stop Bit Select */
+#define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */
+#define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */
+#define UTCR0_DSS 0x00000008 /* Data Size Select */
+#define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */
+#define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */
+#define UTCR0_SCE 0x00000010 /* Sample Clock Enable */
+ /* (ser. port 1: GPIO [18], */
+ /* ser. port 3: GPIO [20]) */
+#define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */
+#define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */
+#define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */
+#define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */
+#define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */
#define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */
-#define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \
+#define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \
(UTCR0_1StpBit + UTCR0_8BitData)
#define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
#define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
/* fua = fxtl/(16*(BRD[11:0] + 1)) */
/* Tua = 16*(BRD [11:0] + 1)*Txtl */
-#define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+#define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
(((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
FShft (UTCR1_BRD))
-#define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+#define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
(((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
FShft (UTCR2_BRD))
/* fua = fxtl/(16*Floor (Div/16)) */
/* Tua = 16*Floor (Div/16)*Txtl */
-#define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+#define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
(((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
FShft (UTCR1_BRD))
-#define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+#define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
(((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
FShft (UTCR2_BRD))
/* fua = fxtl/(16*Ceil (Div/16)) */
/* Tua = 16*Ceil (Div/16)*Txtl */
-#define UTCR3_RXE 0x00000001 /* Receive Enable */
-#define UTCR3_TXE 0x00000002 /* Transmit Enable */
-#define UTCR3_BRK 0x00000004 /* BReaK mode */
+#define UTCR3_RXE 0x00000001 /* Receive Enable */
+#define UTCR3_TXE 0x00000002 /* Transmit Enable */
+#define UTCR3_BRK 0x00000004 /* BReaK mode */
#define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
- /* more Interrupt Enable */
+ /* more Interrupt Enable */
#define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
- /* Interrupt Enable */
-#define UTCR3_LBM 0x00000020 /* Look-Back Mode */
-#define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \
+ /* Interrupt Enable */
+#define UTCR3_LBM 0x00000020 /* Look-Back Mode */
+#define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \
/* TIE, LBM can be set or cleared) */ \
(UTCR3_RXE + UTCR3_TXE)
#define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */
- /* (HP-SIR) modulation Enable */
+ /* (HP-SIR) modulation Enable */
#define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */
-#define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */
-#define UTCR4_LPM 0x00000002 /* Low-Power Mode */
-#define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */
-#define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */
+#define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */
+#define UTCR4_LPM 0x00000002 /* Low-Power Mode */
+#define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */
+#define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */
-#define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-#if 0 /* Hidden receive FIFO bits */
+#define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
#define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */
#define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */
#define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
#endif /* 0 */
#define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */
- /* Service request (read) */
+ /* Service request (read) */
#define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */
- /* more Service request (read) */
-#define UTSR0_RID 0x00000004 /* Receiver IDle */
-#define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */
-#define UTSR0_REB 0x00000010 /* Receive End of Break */
-#define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */
+ /* more Service request (read) */
+#define UTSR0_RID 0x00000004 /* Receiver IDle */
+#define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */
+#define UTSR0_REB 0x00000010 /* Receive End of Break */
+#define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */
-#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
+#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
#define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */
#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
-#define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */
+#define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */
#define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */
#define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */
@@ -617,27 +617,27 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* Synchronous Data Link Controller (SDLC) control registers
*
* Registers
- * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 0 (read/write).
- * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 1 (read/write).
- * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 2 (read/write).
- * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 3 (read/write).
- * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 4 (read/write).
- * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC)
- * Data Register (read/write).
- * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Status Register 0 (read/write).
- * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Status Register 1 (read/write).
+ * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 0 (read/write).
+ * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 1 (read/write).
+ * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 2 (read/write).
+ * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 3 (read/write).
+ * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 4 (read/write).
+ * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Data Register (read/write).
+ * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Status Register 0 (read/write).
+ * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Status Register 1 (read/write).
*
* Clocks
* fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
- * or 3.5795 MHz).
- * fsd, Tsd Frequency, period of the SDLC communication.
+ * or 3.5795 MHz).
+ * fsd, Tsd Frequency, period of the SDLC communication.
*/
#define _Ser1SDCR0 0x80020060 /* Ser. port 1 SDLC Control Reg. 0 */
@@ -645,110 +645,110 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
#define _Ser1SDCR2 0x80020068 /* Ser. port 1 SDLC Control Reg. 2 */
#define _Ser1SDCR3 0x8002006C /* Ser. port 1 SDLC Control Reg. 3 */
#define _Ser1SDCR4 0x80020070 /* Ser. port 1 SDLC Control Reg. 4 */
-#define _Ser1SDDR 0x80020078 /* Ser. port 1 SDLC Data Reg. */
+#define _Ser1SDDR 0x80020078 /* Ser. port 1 SDLC Data Reg. */
#define _Ser1SDSR0 0x80020080 /* Ser. port 1 SDLC Status Reg. 0 */
#define _Ser1SDSR1 0x80020084 /* Ser. port 1 SDLC Status Reg. 1 */
#if LANGUAGE == C
-#define Ser1SDCR0 /* Ser. port 1 SDLC Control Reg. 0 */ \
+#define Ser1SDCR0 /* Ser. port 1 SDLC Control Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser1SDCR0)))
-#define Ser1SDCR1 /* Ser. port 1 SDLC Control Reg. 1 */ \
+#define Ser1SDCR1 /* Ser. port 1 SDLC Control Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser1SDCR1)))
-#define Ser1SDCR2 /* Ser. port 1 SDLC Control Reg. 2 */ \
+#define Ser1SDCR2 /* Ser. port 1 SDLC Control Reg. 2 */ \
(*((volatile Word *) io_p2v (_Ser1SDCR2)))
-#define Ser1SDCR3 /* Ser. port 1 SDLC Control Reg. 3 */ \
+#define Ser1SDCR3 /* Ser. port 1 SDLC Control Reg. 3 */ \
(*((volatile Word *) io_p2v (_Ser1SDCR3)))
-#define Ser1SDCR4 /* Ser. port 1 SDLC Control Reg. 4 */ \
+#define Ser1SDCR4 /* Ser. port 1 SDLC Control Reg. 4 */ \
(*((volatile Word *) io_p2v (_Ser1SDCR4)))
-#define Ser1SDDR /* Ser. port 1 SDLC Data Reg. */ \
+#define Ser1SDDR /* Ser. port 1 SDLC Data Reg. */ \
(*((volatile Word *) io_p2v (_Ser1SDDR)))
-#define Ser1SDSR0 /* Ser. port 1 SDLC Status Reg. 0 */ \
+#define Ser1SDSR0 /* Ser. port 1 SDLC Status Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser1SDSR0)))
-#define Ser1SDSR1 /* Ser. port 1 SDLC Status Reg. 1 */ \
+#define Ser1SDSR1 /* Ser. port 1 SDLC Status Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser1SDSR1)))
#endif /* LANGUAGE == C */
-#define SDCR0_SUS 0x00000001 /* SDLC/UART Select */
-#define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */
-#define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */
+#define SDCR0_SUS 0x00000001 /* SDLC/UART Select */
+#define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */
+#define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */
#define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */
-#define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */
-#define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */
-#define SDCR0_LBM 0x00000004 /* Look-Back Mode */
-#define SDCR0_BMS 0x00000008 /* Bit Modulation Select */
-#define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */
+#define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */
+#define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */
+#define SDCR0_LBM 0x00000004 /* Look-Back Mode */
+#define SDCR0_BMS 0x00000008 /* Bit Modulation Select */
+#define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */
#define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */
#define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */
#define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */
- /* (GPIO [16]) */
-#define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */
-#define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */
-#define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */
-#define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */
-#define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */
-#define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */
-#define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */
+ /* (GPIO [16]) */
+#define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */
+#define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */
+#define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */
+#define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */
+#define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */
+#define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */
+#define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */
#define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */
-#define SDCR1_AAF 0x00000001 /* Abort After Frame enable */
- /* (GPIO [17]) */
-#define SDCR1_TXE 0x00000002 /* Transmit Enable */
-#define SDCR1_RXE 0x00000004 /* Receive Enable */
+#define SDCR1_AAF 0x00000001 /* Abort After Frame enable */
+ /* (GPIO [17]) */
+#define SDCR1_TXE 0x00000002 /* Transmit Enable */
+#define SDCR1_RXE 0x00000004 /* Receive Enable */
#define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
- /* more Interrupt Enable */
+ /* more Interrupt Enable */
#define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
- /* Interrupt Enable */
-#define SDCR1_AME 0x00000020 /* Address Match Enable */
+ /* Interrupt Enable */
+#define SDCR1_AME 0x00000020 /* Address Match Enable */
#define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */
-#define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */
-#define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */
+#define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */
+#define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */
#define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */
-#define SDCR2_AMV Fld (8, 0) /* Address Match Value */
+#define SDCR2_AMV Fld (8, 0) /* Address Match Value */
#define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
#define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
/* fsd = fxtl/(16*(BRD[11:0] + 1)) */
/* Tsd = 16*(BRD[11:0] + 1)*Txtl */
-#define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+#define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
(((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
FShft (SDCR3_BRD))
-#define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+#define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
(((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
FShft (SDCR4_BRD))
/* fsd = fxtl/(16*Floor (Div/16)) */
/* Tsd = 16*Floor (Div/16)*Txtl */
-#define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+#define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
(((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
FShft (SDCR3_BRD))
-#define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+#define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
(((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
FShft (SDCR4_BRD))
/* fsd = fxtl/(16*Ceil (Div/16)) */
/* Tsd = 16*Ceil (Div/16)*Txtl */
-#define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-#if 0 /* Hidden receive FIFO bits */
+#define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
#define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
-#define SDDR_CRE 0x00000200 /* receive CRC Error (read) */
+#define SDDR_CRE 0x00000200 /* receive CRC Error (read) */
#define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
#endif /* 0 */
-#define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */
-#define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
-#define SDSR0_RAB 0x00000004 /* Receive ABort */
+#define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */
+#define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
+#define SDSR0_RAB 0x00000004 /* Receive ABort */
#define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
- /* Service request (read) */
+ /* Service request (read) */
#define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */
- /* more Service request (read) */
+ /* more Service request (read) */
#define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
-#define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */
+#define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */
#define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
#define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
-#define SDSR1_RTD 0x00000010 /* Receive Transition Detected */
-#define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */
-#define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */
+#define SDSR1_RTD 0x00000010 /* Receive Transition Detected */
+#define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */
+#define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */
#define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */
@@ -756,159 +756,159 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* High-Speed Serial to Parallel controller (HSSP) control registers
*
* Registers
- * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Control Register 0 (read/write).
- * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Control Register 1 (read/write).
- * Ser2HSDR Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Data Register (read/write).
- * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Status Register 0 (read/write).
- * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Status Register 1 (read).
- * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Control Register 2 (read/write).
- * [The HSCR2 register is only implemented in
- * versions 2.0 (rev. = 8) and higher of the StrongARM
- * SA-1100.]
+ * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 0 (read/write).
+ * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 1 (read/write).
+ * Ser2HSDR Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Data Register (read/write).
+ * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Status Register 0 (read/write).
+ * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Status Register 1 (read).
+ * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 2 (read/write).
+ * [The HSCR2 register is only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
*/
#define _Ser2HSCR0 0x80040060 /* Ser. port 2 HSSP Control Reg. 0 */
#define _Ser2HSCR1 0x80040064 /* Ser. port 2 HSSP Control Reg. 1 */
-#define _Ser2HSDR 0x8004006C /* Ser. port 2 HSSP Data Reg. */
+#define _Ser2HSDR 0x8004006C /* Ser. port 2 HSSP Data Reg. */
#define _Ser2HSSR0 0x80040074 /* Ser. port 2 HSSP Status Reg. 0 */
#define _Ser2HSSR1 0x80040078 /* Ser. port 2 HSSP Status Reg. 1 */
#define _Ser2HSCR2 0x90060028 /* Ser. port 2 HSSP Control Reg. 2 */
#if LANGUAGE == C
-#define Ser2HSCR0 /* Ser. port 2 HSSP Control Reg. 0 */ \
+#define Ser2HSCR0 /* Ser. port 2 HSSP Control Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser2HSCR0)))
-#define Ser2HSCR1 /* Ser. port 2 HSSP Control Reg. 1 */ \
+#define Ser2HSCR1 /* Ser. port 2 HSSP Control Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser2HSCR1)))
-#define Ser2HSDR /* Ser. port 2 HSSP Data Reg. */ \
+#define Ser2HSDR /* Ser. port 2 HSSP Data Reg. */ \
(*((volatile Word *) io_p2v (_Ser2HSDR)))
-#define Ser2HSSR0 /* Ser. port 2 HSSP Status Reg. 0 */ \
+#define Ser2HSSR0 /* Ser. port 2 HSSP Status Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser2HSSR0)))
-#define Ser2HSSR1 /* Ser. port 2 HSSP Status Reg. 1 */ \
+#define Ser2HSSR1 /* Ser. port 2 HSSP Status Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser2HSSR1)))
-#define Ser2HSCR2 /* Ser. port 2 HSSP Control Reg. 2 */ \
+#define Ser2HSCR2 /* Ser. port 2 HSSP Control Reg. 2 */ \
(*((volatile Word *) io_p2v (_Ser2HSCR2)))
#endif /* LANGUAGE == C */
-#define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */
+#define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */
#define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */
-#define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */
-#define HSCR0_LBM 0x00000002 /* Look-Back Mode */
+#define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */
+#define HSCR0_LBM 0x00000002 /* Look-Back Mode */
#define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */
-#define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */
-#define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */
-#define HSCR0_TXE 0x00000008 /* Transmit Enable */
-#define HSCR0_RXE 0x00000010 /* Receive Enable */
+#define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */
+#define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */
+#define HSCR0_TXE 0x00000008 /* Transmit Enable */
+#define HSCR0_RXE 0x00000010 /* Receive Enable */
#define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */
- /* more Interrupt Enable */
+ /* more Interrupt Enable */
#define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */
- /* Interrupt Enable */
-#define HSCR0_AME 0x00000080 /* Address Match Enable */
+ /* Interrupt Enable */
+#define HSCR0_AME 0x00000080 /* Address Match Enable */
-#define HSCR1_AMV Fld (8, 0) /* Address Match Value */
+#define HSCR1_AMV Fld (8, 0) /* Address Match Value */
-#define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-#if 0 /* Hidden receive FIFO bits */
+#define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
#define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
-#define HSDR_CRE 0x00000200 /* receive CRC Error (read) */
+#define HSDR_CRE 0x00000200 /* receive CRC Error (read) */
#define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
#endif /* 0 */
-#define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */
-#define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
-#define HSSR0_RAB 0x00000004 /* Receive ABort */
+#define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */
+#define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
+#define HSSR0_RAB 0x00000004 /* Receive ABort */
#define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
- /* Service request (read) */
+ /* Service request (read) */
#define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */
- /* more Service request (read) */
-#define HSSR0_FRE 0x00000020 /* receive FRaming Error */
+ /* more Service request (read) */
+#define HSSR0_FRE 0x00000020 /* receive FRaming Error */
#define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
-#define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */
+#define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */
#define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
#define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
-#define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */
-#define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */
+#define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */
+#define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */
#define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */
#define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */
-#define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */
- /* (inverted) */
-#define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */
- /* (non-inverted) */
+#define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */
+ /* (inverted) */
+#define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */
+ /* (non-inverted) */
#define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */
-#define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */
- /* (inverted) */
-#define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */
- /* (non-inverted) */
+#define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */
+ /* (inverted) */
+#define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */
+ /* (non-inverted) */
/*
* Multi-media Communications Port (MCP) control registers
*
* Registers
- * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP)
- * Control Register 0 (read/write).
- * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP)
- * Data Register 0 (audio, read/write).
- * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP)
- * Data Register 1 (telecom, read/write).
- * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP)
- * Data Register 2 (CODEC registers, read/write).
- * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP)
- * Status Register (read/write).
- * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP)
- * Control Register 1 (read/write).
- * [The MCCR1 register is only implemented in
- * versions 2.0 (rev. = 8) and higher of the StrongARM
- * SA-1100.]
+ * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP)
+ * Control Register 0 (read/write).
+ * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 0 (audio, read/write).
+ * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 1 (telecom, read/write).
+ * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 2 (CODEC registers, read/write).
+ * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP)
+ * Status Register (read/write).
+ * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP)
+ * Control Register 1 (read/write).
+ * [The MCCR1 register is only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
*
* Clocks
- * fmc, Tmc Frequency, period of the MCP communication (10 MHz,
- * 12 MHz, or GPIO [21]).
+ * fmc, Tmc Frequency, period of the MCP communication (10 MHz,
+ * 12 MHz, or GPIO [21]).
* faud, Taud Frequency, period of the audio sampling.
* ftcm, Ttcm Frequency, period of the telecom sampling.
*/
#define _Ser4MCCR0 0x80060000 /* Ser. port 4 MCP Control Reg. 0 */
-#define _Ser4MCDR0 0x80060008 /* Ser. port 4 MCP Data Reg. 0 */
- /* (audio) */
-#define _Ser4MCDR1 0x8006000C /* Ser. port 4 MCP Data Reg. 1 */
- /* (telecom) */
-#define _Ser4MCDR2 0x80060010 /* Ser. port 4 MCP Data Reg. 2 */
- /* (CODEC reg.) */
-#define _Ser4MCSR 0x80060018 /* Ser. port 4 MCP Status Reg. */
+#define _Ser4MCDR0 0x80060008 /* Ser. port 4 MCP Data Reg. 0 */
+ /* (audio) */
+#define _Ser4MCDR1 0x8006000C /* Ser. port 4 MCP Data Reg. 1 */
+ /* (telecom) */
+#define _Ser4MCDR2 0x80060010 /* Ser. port 4 MCP Data Reg. 2 */
+ /* (CODEC reg.) */
+#define _Ser4MCSR 0x80060018 /* Ser. port 4 MCP Status Reg. */
#define _Ser4MCCR1 0x90060030 /* Ser. port 4 MCP Control Reg. 1 */
#if LANGUAGE == C
-#define Ser4MCCR0 /* Ser. port 4 MCP Control Reg. 0 */ \
+#define Ser4MCCR0 /* Ser. port 4 MCP Control Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser4MCCR0)))
-#define Ser4MCDR0 /* Ser. port 4 MCP Data Reg. 0 */ \
- /* (audio) */ \
+#define Ser4MCDR0 /* Ser. port 4 MCP Data Reg. 0 */ \
+ /* (audio) */ \
(*((volatile Word *) io_p2v (_Ser4MCDR0)))
-#define Ser4MCDR1 /* Ser. port 4 MCP Data Reg. 1 */ \
- /* (telecom) */ \
+#define Ser4MCDR1 /* Ser. port 4 MCP Data Reg. 1 */ \
+ /* (telecom) */ \
(*((volatile Word *) io_p2v (_Ser4MCDR1)))
-#define Ser4MCDR2 /* Ser. port 4 MCP Data Reg. 2 */ \
- /* (CODEC reg.) */ \
+#define Ser4MCDR2 /* Ser. port 4 MCP Data Reg. 2 */ \
+ /* (CODEC reg.) */ \
(*((volatile Word *) io_p2v (_Ser4MCDR2)))
-#define Ser4MCSR /* Ser. port 4 MCP Status Reg. */ \
+#define Ser4MCSR /* Ser. port 4 MCP Status Reg. */ \
(*((volatile Word *) io_p2v (_Ser4MCSR)))
-#define Ser4MCCR1 /* Ser. port 4 MCP Control Reg. 1 */ \
+#define Ser4MCCR1 /* Ser. port 4 MCP Control Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser4MCCR1)))
#endif /* LANGUAGE == C */
#define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */
- /* [6..127] */
- /* faud = fmc/(32*ASD) */
- /* Taud = 32*ASD*Tmc */
-#define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \
- /* [192..4064] */ \
+ /* [6..127] */
+ /* faud = fmc/(32*ASD) */
+ /* Taud = 32*ASD*Tmc */
+#define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \
+ /* [192..4064] */ \
((Div)/32 << FShft (MCCR0_ASD))
/* faud = fmc/(32*Floor (Div/32)) */
/* Taud = 32*Floor (Div/32)*Tmc */
@@ -916,12 +916,12 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
(((Div) + 31)/32 << FShft (MCCR0_ASD))
/* faud = fmc/(32*Ceil (Div/32)) */
/* Taud = 32*Ceil (Div/32)*Tmc */
-#define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */
- /* Divisor/32 [16..127] */
- /* ftcm = fmc/(32*TSD) */
- /* Ttcm = 32*TSD*Tmc */
-#define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \
- /* [512..4064] */ \
+#define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */
+ /* Divisor/32 [16..127] */
+ /* ftcm = fmc/(32*TSD) */
+ /* Ttcm = 32*TSD*Tmc */
+#define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \
+ /* [512..4064] */ \
((Div)/32 << FShft (MCCR0_TSD))
/* ftcm = fmc/(32*Floor (Div/32)) */
/* Ttcm = 32*Floor (Div/32)*Tmc */
@@ -929,460 +929,460 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
(((Div) + 31)/32 << FShft (MCCR0_TSD))
/* ftcm = fmc/(32*Ceil (Div/32)) */
/* Ttcm = 32*Ceil (Div/32)*Tmc */
-#define MCCR0_MCE 0x00010000 /* MCP Enable */
-#define MCCR0_ECS 0x00020000 /* External Clock Select */
+#define MCCR0_MCE 0x00010000 /* MCP Enable */
+#define MCCR0_ECS 0x00020000 /* External Clock Select */
#define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */
-#define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */
-#define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */
- /* sampling/storing Mode */
-#define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */
+#define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */
+#define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */
+ /* sampling/storing Mode */
+#define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */
#define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */
#define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */
- /* or less interrupt Enable */
+ /* or less interrupt Enable */
#define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */
- /* or more interrupt Enable */
+ /* or more interrupt Enable */
#define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */
- /* or less interrupt Enable */
+ /* or less interrupt Enable */
#define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */
- /* more interrupt Enable */
-#define MCCR0_LBM 0x00800000 /* Look-Back Mode */
+ /* more interrupt Enable */
+#define MCCR0_LBM 0x00800000 /* Look-Back Mode */
#define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */
-#define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \
+#define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \
(((Div) - 1) << FShft (MCCR0_ECP))
-#define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */
- /* FIFOs */
+#define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */
+ /* FIFOs */
#define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */
- /* FIFOs */
+ /* FIFOs */
- /* receive/transmit CODEC reg. */
- /* FIFOs: */
-#define MCDR2_DATA Fld (16, 0) /* reg. DATA */
-#define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */
-#define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */
-#define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */
-#define MCDR2_ADD Fld (4, 17) /* reg. ADDress */
+ /* receive/transmit CODEC reg. */
+ /* FIFOs: */
+#define MCDR2_DATA Fld (16, 0) /* reg. DATA */
+#define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */
+#define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */
+#define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */
+#define MCDR2_ADD Fld (4, 17) /* reg. ADDress */
#define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */
/* or less Service request (read) */
#define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */
- /* more Service request (read) */
+ /* more Service request (read) */
#define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */
/* or less Service request (read) */
#define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */
/* or more Service request (read) */
#define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */
-#define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */
+#define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */
#define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */
#define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */
#define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */
- /* (read) */
+ /* (read) */
#define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */
- /* (read) */
+ /* (read) */
#define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */
- /* (read) */
+ /* (read) */
#define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */
- /* (read) */
+ /* (read) */
#define MCSR_CWC 0x00001000 /* CODEC register Write Completed */
- /* (read) */
+ /* (read) */
#define MCSR_CRC 0x00002000 /* CODEC register Read Completed */
- /* (read) */
-#define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */
+ /* (read) */
+#define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */
#define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */
-#define MCCR1_CFS 0x00100000 /* Clock Freq. Select */
-#define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */
- /* (11.981 MHz) */
-#define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */
- /* (9.585 MHz) */
+#define MCCR1_CFS 0x00100000 /* Clock Freq. Select */
+#define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */
+ /* (11.981 MHz) */
+#define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */
+ /* (9.585 MHz) */
/*
* Synchronous Serial Port (SSP) control registers
*
* Registers
- * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control
- * Register 0 (read/write).
- * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control
- * Register 1 (read/write).
- * [Bits SPO and SP are only implemented in versions 2.0
- * (rev. = 8) and higher of the StrongARM SA-1100.]
- * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data
- * Register (read/write).
- * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status
- * Register (read/write).
+ * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control
+ * Register 0 (read/write).
+ * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control
+ * Register 1 (read/write).
+ * [Bits SPO and SP are only implemented in versions 2.0
+ * (rev. = 8) and higher of the StrongARM SA-1100.]
+ * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data
+ * Register (read/write).
+ * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status
+ * Register (read/write).
*
* Clocks
* fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
- * or 3.5795 MHz).
- * fss, Tss Frequency, period of the SSP communication.
+ * or 3.5795 MHz).
+ * fss, Tss Frequency, period of the SSP communication.
*/
#define _Ser4SSCR0 0x80070060 /* Ser. port 4 SSP Control Reg. 0 */
#define _Ser4SSCR1 0x80070064 /* Ser. port 4 SSP Control Reg. 1 */
-#define _Ser4SSDR 0x8007006C /* Ser. port 4 SSP Data Reg. */
-#define _Ser4SSSR 0x80070074 /* Ser. port 4 SSP Status Reg. */
+#define _Ser4SSDR 0x8007006C /* Ser. port 4 SSP Data Reg. */
+#define _Ser4SSSR 0x80070074 /* Ser. port 4 SSP Status Reg. */
#if LANGUAGE == C
-#define Ser4SSCR0 /* Ser. port 4 SSP Control Reg. 0 */ \
+#define Ser4SSCR0 /* Ser. port 4 SSP Control Reg. 0 */ \
(*((volatile Word *) io_p2v (_Ser4SSCR0)))
-#define Ser4SSCR1 /* Ser. port 4 SSP Control Reg. 1 */ \
+#define Ser4SSCR1 /* Ser. port 4 SSP Control Reg. 1 */ \
(*((volatile Word *) io_p2v (_Ser4SSCR1)))
-#define Ser4SSDR /* Ser. port 4 SSP Data Reg. */ \
+#define Ser4SSDR /* Ser. port 4 SSP Data Reg. */ \
(*((volatile Word *) io_p2v (_Ser4SSDR)))
-#define Ser4SSSR /* Ser. port 4 SSP Status Reg. */ \
+#define Ser4SSSR /* Ser. port 4 SSP Status Reg. */ \
(*((volatile Word *) io_p2v (_Ser4SSSR)))
#endif /* LANGUAGE == C */
#define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */
-#define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \
+#define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \
(((Size) - 1) << FShft (SSCR0_DSS))
-#define SSCR0_FRF Fld (2, 4) /* FRame Format */
-#define SSCR0_Motorola /* Motorola Serial Peripheral */ \
- /* Interface (SPI) format */ \
+#define SSCR0_FRF Fld (2, 4) /* FRame Format */
+#define SSCR0_Motorola /* Motorola Serial Peripheral */ \
+ /* Interface (SPI) format */ \
(0 << FShft (SSCR0_FRF))
-#define SSCR0_TI /* Texas Instruments Synchronous */ \
- /* Serial format */ \
+#define SSCR0_TI /* Texas Instruments Synchronous */ \
+ /* Serial format */ \
(1 << FShft (SSCR0_FRF))
-#define SSCR0_National /* National Microwire format */ \
+#define SSCR0_National /* National Microwire format */ \
(2 << FShft (SSCR0_FRF))
-#define SSCR0_SSE 0x00000080 /* SSP Enable */
+#define SSCR0_SSE 0x00000080 /* SSP Enable */
#define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */
- /* fss = fxtl/(2*(SCR + 1)) */
- /* Tss = 2*(SCR + 1)*Txtl */
-#define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \
+ /* fss = fxtl/(2*(SCR + 1)) */
+ /* Tss = 2*(SCR + 1)*Txtl */
+#define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \
(((Div) - 2)/2 << FShft (SSCR0_SCR))
/* fss = fxtl/(2*Floor (Div/2)) */
- /* Tss = 2*Floor (Div/2)*Txtl */
+ /* Tss = 2*Floor (Div/2)*Txtl */
#define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \
(((Div) - 1)/2 << FShft (SSCR0_SCR))
/* fss = fxtl/(2*Ceil (Div/2)) */
- /* Tss = 2*Ceil (Div/2)*Txtl */
+ /* Tss = 2*Ceil (Div/2)*Txtl */
#define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */
- /* Interrupt Enable */
+ /* Interrupt Enable */
#define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */
- /* Interrupt Enable */
-#define SSCR1_LBM 0x00000004 /* Look-Back Mode */
+ /* Interrupt Enable */
+#define SSCR1_LBM 0x00000004 /* Look-Back Mode */
#define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */
-#define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */
-#define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */
-#define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */
+#define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */
+#define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */
+#define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */
#define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */
/* after frame (SFRM, 1st edge) */
#define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */
/* after frame (SFRM, 1st edge) */
-#define SSCR1_ECS 0x00000020 /* External Clock Select */
-#define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */
-#define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */
+#define SSCR1_ECS 0x00000020 /* External Clock Select */
+#define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */
+#define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */
-#define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */
+#define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */
#define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */
#define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
-#define SSSR_BSY 0x00000008 /* SSP BuSY (read) */
+#define SSSR_BSY 0x00000008 /* SSP BuSY (read) */
#define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */
- /* Service request (read) */
+ /* Service request (read) */
#define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */
- /* Service request (read) */
-#define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */
+ /* Service request (read) */
+#define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */
/*
* Operating System (OS) timer control registers
*
* Registers
- * OSMR0 Operating System (OS) timer Match Register 0
- * (read/write).
- * OSMR1 Operating System (OS) timer Match Register 1
- * (read/write).
- * OSMR2 Operating System (OS) timer Match Register 2
- * (read/write).
- * OSMR3 Operating System (OS) timer Match Register 3
- * (read/write).
- * OSCR Operating System (OS) timer Counter Register
- * (read/write).
- * OSSR Operating System (OS) timer Status Register
- * (read/write).
- * OWER Operating System (OS) timer Watch-dog Enable Register
- * (read/write).
- * OIER Operating System (OS) timer Interrupt Enable Register
- * (read/write).
+ * OSMR0 Operating System (OS) timer Match Register 0
+ * (read/write).
+ * OSMR1 Operating System (OS) timer Match Register 1
+ * (read/write).
+ * OSMR2 Operating System (OS) timer Match Register 2
+ * (read/write).
+ * OSMR3 Operating System (OS) timer Match Register 3
+ * (read/write).
+ * OSCR Operating System (OS) timer Counter Register
+ * (read/write).
+ * OSSR Operating System (OS) timer Status Register
+ * (read/write).
+ * OWER Operating System (OS) timer Watch-dog Enable Register
+ * (read/write).
+ * OIER Operating System (OS) timer Interrupt Enable Register
+ * (read/write).
*/
-#define _OSMR(Nb) /* OS timer Match Reg. [0..3] */ \
+#define _OSMR(Nb) /* OS timer Match Reg. [0..3] */ \
(0x90000000 + (Nb)*4)
-#define _OSMR0 _OSMR (0) /* OS timer Match Reg. 0 */
-#define _OSMR1 _OSMR (1) /* OS timer Match Reg. 1 */
-#define _OSMR2 _OSMR (2) /* OS timer Match Reg. 2 */
-#define _OSMR3 _OSMR (3) /* OS timer Match Reg. 3 */
-#define _OSCR 0x90000010 /* OS timer Counter Reg. */
-#define _OSSR 0x90000014 /* OS timer Status Reg. */
-#define _OWER 0x90000018 /* OS timer Watch-dog Enable Reg. */
-#define _OIER 0x9000001C /* OS timer Interrupt Enable Reg. */
+#define _OSMR0 _OSMR (0) /* OS timer Match Reg. 0 */
+#define _OSMR1 _OSMR (1) /* OS timer Match Reg. 1 */
+#define _OSMR2 _OSMR (2) /* OS timer Match Reg. 2 */
+#define _OSMR3 _OSMR (3) /* OS timer Match Reg. 3 */
+#define _OSCR 0x90000010 /* OS timer Counter Reg. */
+#define _OSSR 0x90000014 /* OS timer Status Reg. */
+#define _OWER 0x90000018 /* OS timer Watch-dog Enable Reg. */
+#define _OIER 0x9000001C /* OS timer Interrupt Enable Reg. */
#if LANGUAGE == C
-#define OSMR /* OS timer Match Reg. [0..3] */ \
+#define OSMR /* OS timer Match Reg. [0..3] */ \
((volatile Word *) io_p2v (_OSMR (0)))
-#define OSMR0 (OSMR [0]) /* OS timer Match Reg. 0 */
-#define OSMR1 (OSMR [1]) /* OS timer Match Reg. 1 */
-#define OSMR2 (OSMR [2]) /* OS timer Match Reg. 2 */
-#define OSMR3 (OSMR [3]) /* OS timer Match Reg. 3 */
-#define OSCR /* OS timer Counter Reg. */ \
+#define OSMR0 (OSMR [0]) /* OS timer Match Reg. 0 */
+#define OSMR1 (OSMR [1]) /* OS timer Match Reg. 1 */
+#define OSMR2 (OSMR [2]) /* OS timer Match Reg. 2 */
+#define OSMR3 (OSMR [3]) /* OS timer Match Reg. 3 */
+#define OSCR /* OS timer Counter Reg. */ \
(*((volatile Word *) io_p2v (_OSCR)))
-#define OSSR /* OS timer Status Reg. */ \
+#define OSSR /* OS timer Status Reg. */ \
(*((volatile Word *) io_p2v (_OSSR)))
-#define OWER /* OS timer Watch-dog Enable Reg. */ \
+#define OWER /* OS timer Watch-dog Enable Reg. */ \
(*((volatile Word *) io_p2v (_OWER)))
-#define OIER /* OS timer Interrupt Enable Reg. */ \
+#define OIER /* OS timer Interrupt Enable Reg. */ \
(*((volatile Word *) io_p2v (_OIER)))
#endif /* LANGUAGE == C */
-#define OSSR_M(Nb) /* Match detected [0..3] */ \
+#define OSSR_M(Nb) /* Match detected [0..3] */ \
(0x00000001 << (Nb))
-#define OSSR_M0 OSSR_M (0) /* Match detected 0 */
-#define OSSR_M1 OSSR_M (1) /* Match detected 1 */
-#define OSSR_M2 OSSR_M (2) /* Match detected 2 */
-#define OSSR_M3 OSSR_M (3) /* Match detected 3 */
+#define OSSR_M0 OSSR_M (0) /* Match detected 0 */
+#define OSSR_M1 OSSR_M (1) /* Match detected 1 */
+#define OSSR_M2 OSSR_M (2) /* Match detected 2 */
+#define OSSR_M3 OSSR_M (3) /* Match detected 3 */
-#define OWER_WME 0x00000001 /* Watch-dog Match Enable */
- /* (set only) */
+#define OWER_WME 0x00000001 /* Watch-dog Match Enable */
+ /* (set only) */
-#define OIER_E(Nb) /* match interrupt Enable [0..3] */ \
+#define OIER_E(Nb) /* match interrupt Enable [0..3] */ \
(0x00000001 << (Nb))
-#define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */
-#define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */
-#define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */
-#define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */
+#define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */
+#define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */
+#define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */
+#define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */
/*
* Real-Time Clock (RTC) control registers
*
* Registers
- * RTAR Real-Time Clock (RTC) Alarm Register (read/write).
- * RCNR Real-Time Clock (RTC) CouNt Register (read/write).
- * RTTR Real-Time Clock (RTC) Trim Register (read/write).
- * RTSR Real-Time Clock (RTC) Status Register (read/write).
+ * RTAR Real-Time Clock (RTC) Alarm Register (read/write).
+ * RCNR Real-Time Clock (RTC) CouNt Register (read/write).
+ * RTTR Real-Time Clock (RTC) Trim Register (read/write).
+ * RTSR Real-Time Clock (RTC) Status Register (read/write).
*
* Clocks
* frtx, Trtx Frequency, period of the real-time clock crystal
- * (32.768 kHz nominal).
+ * (32.768 kHz nominal).
* frtc, Trtc Frequency, period of the real-time clock counter
- * (1 Hz nominal).
+ * (1 Hz nominal).
*/
-#define _RTAR 0x90010000 /* RTC Alarm Reg. */
-#define _RCNR 0x90010004 /* RTC CouNt Reg. */
-#define _RTTR 0x90010008 /* RTC Trim Reg. */
-#define _RTSR 0x90010010 /* RTC Status Reg. */
+#define _RTAR 0x90010000 /* RTC Alarm Reg. */
+#define _RCNR 0x90010004 /* RTC CouNt Reg. */
+#define _RTTR 0x90010008 /* RTC Trim Reg. */
+#define _RTSR 0x90010010 /* RTC Status Reg. */
#if LANGUAGE == C
-#define RTAR /* RTC Alarm Reg. */ \
+#define RTAR /* RTC Alarm Reg. */ \
(*((volatile Word *) io_p2v (_RTAR)))
-#define RCNR /* RTC CouNt Reg. */ \
+#define RCNR /* RTC CouNt Reg. */ \
(*((volatile Word *) io_p2v (_RCNR)))
-#define RTTR /* RTC Trim Reg. */ \
+#define RTTR /* RTC Trim Reg. */ \
(*((volatile Word *) io_p2v (_RTTR)))
-#define RTSR /* RTC Status Reg. */ \
+#define RTSR /* RTC Status Reg. */ \
(*((volatile Word *) io_p2v (_RTSR)))
#endif /* LANGUAGE == C */
-#define RTTR_C Fld (16, 0) /* clock divider Count - 1 */
-#define RTTR_D Fld (10, 16) /* trim Delete count */
+#define RTTR_C Fld (16, 0) /* clock divider Count - 1 */
+#define RTTR_D Fld (10, 16) /* trim Delete count */
/* frtc = (1023*(C + 1) - D)*frtx/ */
- /* (1023*(C + 1)^2) */
+ /* (1023*(C + 1)^2) */
/* Trtc = (1023*(C + 1)^2)*Trtx/ */
- /* (1023*(C + 1) - D) */
+ /* (1023*(C + 1) - D) */
-#define RTSR_AL 0x00000001 /* ALarm detected */
-#define RTSR_HZ 0x00000002 /* 1 Hz clock detected */
-#define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */
-#define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */
+#define RTSR_AL 0x00000001 /* ALarm detected */
+#define RTSR_HZ 0x00000002 /* 1 Hz clock detected */
+#define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */
+#define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */
/*
* Power Manager (PM) control registers
*
* Registers
- * PMCR Power Manager (PM) Control Register (read/write).
- * PSSR Power Manager (PM) Sleep Status Register (read/write).
- * PSPR Power Manager (PM) Scratch-Pad Register (read/write).
- * PWER Power Manager (PM) Wake-up Enable Register
- * (read/write).
- * PCFR Power Manager (PM) general ConFiguration Register
- * (read/write).
- * PPCR Power Manager (PM) Phase-Locked Loop (PLL)
- * Configuration Register (read/write).
- * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO)
- * Sleep state Register (read/write, see GPIO pins).
- * POSR Power Manager (PM) Oscillator Status Register (read).
+ * PMCR Power Manager (PM) Control Register (read/write).
+ * PSSR Power Manager (PM) Sleep Status Register (read/write).
+ * PSPR Power Manager (PM) Scratch-Pad Register (read/write).
+ * PWER Power Manager (PM) Wake-up Enable Register
+ * (read/write).
+ * PCFR Power Manager (PM) general ConFiguration Register
+ * (read/write).
+ * PPCR Power Manager (PM) Phase-Locked Loop (PLL)
+ * Configuration Register (read/write).
+ * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO)
+ * Sleep state Register (read/write, see GPIO pins).
+ * POSR Power Manager (PM) Oscillator Status Register (read).
*
* Clocks
* fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
- * or 3.5795 MHz).
+ * or 3.5795 MHz).
* fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
*/
-#define _PMCR 0x90020000 /* PM Control Reg. */
-#define _PSSR 0x90020004 /* PM Sleep Status Reg. */
-#define _PSPR 0x90020008 /* PM Scratch-Pad Reg. */
-#define _PWER 0x9002000C /* PM Wake-up Enable Reg. */
-#define _PCFR 0x90020010 /* PM general ConFiguration Reg. */
-#define _PPCR 0x90020014 /* PM PLL Configuration Reg. */
-#define _PGSR 0x90020018 /* PM GPIO Sleep state Reg. */
-#define _POSR 0x9002001C /* PM Oscillator Status Reg. */
+#define _PMCR 0x90020000 /* PM Control Reg. */
+#define _PSSR 0x90020004 /* PM Sleep Status Reg. */
+#define _PSPR 0x90020008 /* PM Scratch-Pad Reg. */
+#define _PWER 0x9002000C /* PM Wake-up Enable Reg. */
+#define _PCFR 0x90020010 /* PM general ConFiguration Reg. */
+#define _PPCR 0x90020014 /* PM PLL Configuration Reg. */
+#define _PGSR 0x90020018 /* PM GPIO Sleep state Reg. */
+#define _POSR 0x9002001C /* PM Oscillator Status Reg. */
#if LANGUAGE == C
-#define PMCR /* PM Control Reg. */ \
+#define PMCR /* PM Control Reg. */ \
(*((volatile Word *) io_p2v (_PMCR)))
-#define PSSR /* PM Sleep Status Reg. */ \
+#define PSSR /* PM Sleep Status Reg. */ \
(*((volatile Word *) io_p2v (_PSSR)))
-#define PSPR /* PM Scratch-Pad Reg. */ \
+#define PSPR /* PM Scratch-Pad Reg. */ \
(*((volatile Word *) io_p2v (_PSPR)))
-#define PWER /* PM Wake-up Enable Reg. */ \
+#define PWER /* PM Wake-up Enable Reg. */ \
(*((volatile Word *) io_p2v (_PWER)))
-#define PCFR /* PM general ConFiguration Reg. */ \
+#define PCFR /* PM general ConFiguration Reg. */ \
(*((volatile Word *) io_p2v (_PCFR)))
-#define PPCR /* PM PLL Configuration Reg. */ \
+#define PPCR /* PM PLL Configuration Reg. */ \
(*((volatile Word *) io_p2v (_PPCR)))
-#define PGSR /* PM GPIO Sleep state Reg. */ \
+#define PGSR /* PM GPIO Sleep state Reg. */ \
(*((volatile Word *) io_p2v (_PGSR)))
-#define POSR /* PM Oscillator Status Reg. */ \
+#define POSR /* PM Oscillator Status Reg. */ \
(*((volatile Word *) io_p2v (_POSR)))
#elif LANGUAGE == Assembly
-#define PMCR (io_p2v (_PMCR))
-#define PSSR (io_p2v (_PSSR))
-#define PSPR (io_p2v (_PSPR))
-#define PWER (io_p2v (_PWER))
-#define PCFR (io_p2v (_PCFR))
-#define PPCR (io_p2v (_PPCR))
-#define PGSR (io_p2v (_PGSR))
-#define POSR (io_p2v (_POSR))
+#define PMCR (io_p2v (_PMCR))
+#define PSSR (io_p2v (_PSSR))
+#define PSPR (io_p2v (_PSPR))
+#define PWER (io_p2v (_PWER))
+#define PCFR (io_p2v (_PCFR))
+#define PPCR (io_p2v (_PPCR))
+#define PGSR (io_p2v (_PGSR))
+#define POSR (io_p2v (_POSR))
#endif /* LANGUAGE == C */
-#define PMCR_SF 0x00000001 /* Sleep Force (set only) */
+#define PMCR_SF 0x00000001 /* Sleep Force (set only) */
-#define PSSR_SS 0x00000001 /* Software Sleep */
-#define PSSR_BFS 0x00000002 /* Battery Fault Status */
- /* (BATT_FAULT) */
+#define PSSR_SS 0x00000001 /* Software Sleep */
+#define PSSR_BFS 0x00000002 /* Battery Fault Status */
+ /* (BATT_FAULT) */
#define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */
-#define PSSR_DH 0x00000008 /* DRAM control Hold */
-#define PSSR_PH 0x00000010 /* Peripheral control Hold */
-
-#define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */
-#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
-#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
-#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
-#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
-#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
-#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
-#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
-#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
-#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
-#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
-#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
-#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
-#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
-#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
-#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
-#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
-#define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */
-#define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */
-#define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */
-#define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */
-#define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */
-#define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */
-#define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */
-#define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */
-#define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */
-#define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */
-#define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */
-#define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */
-#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+#define PSSR_DH 0x00000008 /* DRAM control Hold */
+#define PSSR_PH 0x00000010 /* Peripheral control Hold */
+
+#define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */
+#define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */
+#define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */
+#define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */
+#define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */
+#define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */
+#define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */
+#define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */
+#define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */
+#define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */
+#define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */
+#define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
#define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */
#define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */
#define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */
-#define PCFR_FP 0x00000002 /* Float PCMCIA pins */
-#define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */
-#define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */
-#define PCFR_FS 0x00000004 /* Float Static memory pins */
+#define PCFR_FP 0x00000002 /* Float PCMCIA pins */
+#define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */
+#define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */
+#define PCFR_FS 0x00000004 /* Float Static memory pins */
#define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */
#define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */
-#define PCFR_FO 0x00000008 /* Force RTC oscillator */
- /* (32.768 kHz) enable On */
+#define PCFR_FO 0x00000008 /* Force RTC oscillator */
+ /* (32.768 kHz) enable On */
-#define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */
-#define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \
+#define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */
+#define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \
(0x00 << FShft (PPCR_CCF))
-#define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \
+#define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \
(0x01 << FShft (PPCR_CCF))
-#define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \
+#define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \
(0x02 << FShft (PPCR_CCF))
-#define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \
+#define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \
(0x03 << FShft (PPCR_CCF))
-#define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \
+#define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \
(0x04 << FShft (PPCR_CCF))
-#define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \
+#define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \
(0x05 << FShft (PPCR_CCF))
-#define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \
+#define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \
(0x06 << FShft (PPCR_CCF))
-#define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \
+#define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \
(0x07 << FShft (PPCR_CCF))
-#define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \
+#define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \
(0x08 << FShft (PPCR_CCF))
-#define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \
+#define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \
(0x09 << FShft (PPCR_CCF))
-#define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \
+#define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \
(0x0A << FShft (PPCR_CCF))
-#define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \
+#define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \
(0x0B << FShft (PPCR_CCF))
-#define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \
+#define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \
(0x0C << FShft (PPCR_CCF))
-#define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \
+#define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \
(0x0D << FShft (PPCR_CCF))
-#define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \
+#define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \
(0x0E << FShft (PPCR_CCF))
-#define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \
+#define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \
(0x0F << FShft (PPCR_CCF))
- /* 3.6864 MHz crystal (fxtl): */
-#define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */
-#define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */
-#define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */
-#define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */
-#define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */
-#define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */
-#define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */
-#define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */
-#define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */
-#define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */
-#define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */
-#define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */
-#define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */
-#define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */
-#define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */
-#define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */
- /* 3.5795 MHz crystal (fxtl): */
-#define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */
-#define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */
-#define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */
-#define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */
-#define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */
-#define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */
-#define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */
-#define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */
-#define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */
-#define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */
-#define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */
-#define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */
-#define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */
-#define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */
-#define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */
-#define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */
+ /* 3.6864 MHz crystal (fxtl): */
+#define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */
+#define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */
+#define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */
+#define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */
+#define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */
+#define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */
+#define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */
+#define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */
+#define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */
+#define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */
+#define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */
+#define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */
+#define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */
+#define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */
+#define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */
+#define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */
+ /* 3.5795 MHz crystal (fxtl): */
+#define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */
+#define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */
+#define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */
+#define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */
+#define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */
+#define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */
+#define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */
+#define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */
+#define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */
+#define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */
+#define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */
+#define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */
+#define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */
+#define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */
+#define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */
+#define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */
#define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */
@@ -1391,75 +1391,75 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* Reset Controller (RC) control registers
*
* Registers
- * RSRR Reset Controller (RC) Software Reset Register
- * (read/write).
- * RCSR Reset Controller (RC) Status Register (read/write).
+ * RSRR Reset Controller (RC) Software Reset Register
+ * (read/write).
+ * RCSR Reset Controller (RC) Status Register (read/write).
*/
-#define _RSRR 0x90030000 /* RC Software Reset Reg. */
-#define _RCSR 0x90030004 /* RC Status Reg. */
+#define _RSRR 0x90030000 /* RC Software Reset Reg. */
+#define _RCSR 0x90030004 /* RC Status Reg. */
#if LANGUAGE == C
-#define RSRR /* RC Software Reset Reg. */ \
+#define RSRR /* RC Software Reset Reg. */ \
(*((volatile Word *) io_p2v (_RSRR)))
-#define RCSR /* RC Status Reg. */ \
+#define RCSR /* RC Status Reg. */ \
(*((volatile Word *) io_p2v (_RCSR)))
#endif /* LANGUAGE == C */
-#define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */
+#define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */
-#define RCSR_HWR 0x00000001 /* HardWare Reset */
-#define RCSR_SWR 0x00000002 /* SoftWare Reset */
-#define RCSR_WDR 0x00000004 /* Watch-Dog Reset */
-#define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */
+#define RCSR_HWR 0x00000001 /* HardWare Reset */
+#define RCSR_SWR 0x00000002 /* SoftWare Reset */
+#define RCSR_WDR 0x00000004 /* Watch-Dog Reset */
+#define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */
/*
* Test unit control registers
*
* Registers
- * TUCR Test Unit Control Register (read/write).
+ * TUCR Test Unit Control Register (read/write).
*/
-#define _TUCR 0x90030008 /* Test Unit Control Reg. */
+#define _TUCR 0x90030008 /* Test Unit Control Reg. */
#if LANGUAGE == C
-#define TUCR /* Test Unit Control Reg. */ \
+#define TUCR /* Test Unit Control Reg. */ \
(*((volatile Word *) io_p2v (_TUCR)))
#endif /* LANGUAGE == C */
-#define TUCR_TIC 0x00000040 /* TIC mode */
-#define TUCR_TTST 0x00000080 /* Trim TeST mode */
-#define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */
- /* Check */
-#define TUCR_PMD 0x00000200 /* Power Management Disable */
-#define TUCR_MR 0x00000400 /* Memory Request mode */
+#define TUCR_TIC 0x00000040 /* TIC mode */
+#define TUCR_TTST 0x00000080 /* Trim TeST mode */
+#define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */
+ /* Check */
+#define TUCR_PMD 0x00000200 /* Power Management Disable */
+#define TUCR_MR 0x00000400 /* Memory Request mode */
#define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */
#define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */
/* grant (MBGNT) on GPIO [22:21] */
-#define TUCR_CTB Fld (3, 20) /* Clock Test Bits */
-#define TUCR_FDC 0x00800000 /* RTC Force Delete Count */
+#define TUCR_CTB Fld (3, 20) /* Clock Test Bits */
+#define TUCR_FDC 0x00800000 /* RTC Force Delete Count */
#define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */
#define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */
-#define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */
+#define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */
#define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */
-#define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \
+#define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \
(0 << FShft (TUCR_TSEL))
-#define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \
+#define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \
(1 << FShft (TUCR_TSEL))
-#define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \
+#define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \
(2 << FShft (TUCR_TSEL))
-#define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \
+#define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \
(3 << FShft (TUCR_TSEL))
-#define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \
- /* Clocks on GPIO [26:27] */ \
+#define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \
+ /* Clocks on GPIO [26:27] */ \
(4 << FShft (TUCR_TSEL))
-#define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \
- /* (Alternative) */ \
+#define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \
+ /* (Alternative) */ \
(5 << FShft (TUCR_TSEL))
-#define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \
+#define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \
(6 << FShft (TUCR_TSEL))
-#define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \
+#define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \
(7 << FShft (TUCR_TSEL))
@@ -1467,52 +1467,52 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* General-Purpose Input/Output (GPIO) control registers
*
* Registers
- * GPLR General-Purpose Input/Output (GPIO) Pin Level
- * Register (read).
- * GPDR General-Purpose Input/Output (GPIO) Pin Direction
- * Register (read/write).
- * GPSR General-Purpose Input/Output (GPIO) Pin output Set
- * Register (write).
- * GPCR General-Purpose Input/Output (GPIO) Pin output Clear
- * Register (write).
- * GRER General-Purpose Input/Output (GPIO) Rising-Edge
- * detect Register (read/write).
- * GFER General-Purpose Input/Output (GPIO) Falling-Edge
- * detect Register (read/write).
- * GEDR General-Purpose Input/Output (GPIO) Edge Detect
- * status Register (read/write).
- * GAFR General-Purpose Input/Output (GPIO) Alternate
- * Function Register (read/write).
+ * GPLR General-Purpose Input/Output (GPIO) Pin Level
+ * Register (read).
+ * GPDR General-Purpose Input/Output (GPIO) Pin Direction
+ * Register (read/write).
+ * GPSR General-Purpose Input/Output (GPIO) Pin output Set
+ * Register (write).
+ * GPCR General-Purpose Input/Output (GPIO) Pin output Clear
+ * Register (write).
+ * GRER General-Purpose Input/Output (GPIO) Rising-Edge
+ * detect Register (read/write).
+ * GFER General-Purpose Input/Output (GPIO) Falling-Edge
+ * detect Register (read/write).
+ * GEDR General-Purpose Input/Output (GPIO) Edge Detect
+ * status Register (read/write).
+ * GAFR General-Purpose Input/Output (GPIO) Alternate
+ * Function Register (read/write).
*
* Clock
* fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
*/
-#define _GPLR 0x90040000 /* GPIO Pin Level Reg. */
-#define _GPDR 0x90040004 /* GPIO Pin Direction Reg. */
-#define _GPSR 0x90040008 /* GPIO Pin output Set Reg. */
-#define _GPCR 0x9004000C /* GPIO Pin output Clear Reg. */
-#define _GRER 0x90040010 /* GPIO Rising-Edge detect Reg. */
-#define _GFER 0x90040014 /* GPIO Falling-Edge detect Reg. */
-#define _GEDR 0x90040018 /* GPIO Edge Detect status Reg. */
-#define _GAFR 0x9004001C /* GPIO Alternate Function Reg. */
+#define _GPLR 0x90040000 /* GPIO Pin Level Reg. */
+#define _GPDR 0x90040004 /* GPIO Pin Direction Reg. */
+#define _GPSR 0x90040008 /* GPIO Pin output Set Reg. */
+#define _GPCR 0x9004000C /* GPIO Pin output Clear Reg. */
+#define _GRER 0x90040010 /* GPIO Rising-Edge detect Reg. */
+#define _GFER 0x90040014 /* GPIO Falling-Edge detect Reg. */
+#define _GEDR 0x90040018 /* GPIO Edge Detect status Reg. */
+#define _GAFR 0x9004001C /* GPIO Alternate Function Reg. */
#if LANGUAGE == C
-#define GPLR /* GPIO Pin Level Reg. */ \
+#define GPLR /* GPIO Pin Level Reg. */ \
(*((volatile Word *) io_p2v (_GPLR)))
-#define GPDR /* GPIO Pin Direction Reg. */ \
+#define GPDR /* GPIO Pin Direction Reg. */ \
(*((volatile Word *) io_p2v (_GPDR)))
-#define GPSR /* GPIO Pin output Set Reg. */ \
+#define GPSR /* GPIO Pin output Set Reg. */ \
(*((volatile Word *) io_p2v (_GPSR)))
-#define GPCR /* GPIO Pin output Clear Reg. */ \
+#define GPCR /* GPIO Pin output Clear Reg. */ \
(*((volatile Word *) io_p2v (_GPCR)))
-#define GRER /* GPIO Rising-Edge detect Reg. */ \
+#define GRER /* GPIO Rising-Edge detect Reg. */ \
(*((volatile Word *) io_p2v (_GRER)))
-#define GFER /* GPIO Falling-Edge detect Reg. */ \
+#define GFER /* GPIO Falling-Edge detect Reg. */ \
(*((volatile Word *) io_p2v (_GFER)))
-#define GEDR /* GPIO Edge Detect status Reg. */ \
+#define GEDR /* GPIO Edge Detect status Reg. */ \
(*((volatile Word *) io_p2v (_GEDR)))
-#define GAFR /* GPIO Alternate Function Reg. */ \
+#define GAFR /* GPIO Alternate Function Reg. */ \
(*((volatile Word *) io_p2v (_GAFR)))
#elif LANGUAGE == Assembly
@@ -1530,280 +1530,280 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
#define GPIO_MIN (0)
#define GPIO_MAX (27)
-#define GPIO_GPIO(Nb) /* GPIO [0..27] */ \
+#define GPIO_GPIO(Nb) /* GPIO [0..27] */ \
(0x00000001 << (Nb))
-#define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */
-#define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */
-#define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */
-#define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */
-#define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */
-#define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */
-#define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */
-#define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */
-#define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */
-#define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */
-#define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */
-#define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */
-#define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */
-#define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */
-#define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */
-#define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */
-#define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */
-#define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */
-#define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */
-#define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */
-#define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */
-#define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */
-#define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */
-#define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */
-#define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */
-#define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */
-#define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */
-#define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */
-
-#define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \
+#define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */
+#define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */
+#define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */
+#define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */
+#define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */
+#define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */
+#define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */
+#define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */
+#define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */
+#define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */
+#define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */
+#define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */
+#define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */
+#define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */
+#define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */
+#define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */
+#define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */
+#define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */
+#define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */
+#define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */
+#define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */
+#define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */
+#define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */
+#define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */
+#define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */
+#define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */
+#define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */
+#define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */
+
+#define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \
GPIO_GPIO ((Nb) - 6)
-#define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */
-#define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */
-#define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */
-#define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */
-#define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */
-#define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */
-#define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */
-#define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */
- /* ser. port 4: */
-#define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */
-#define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */
-#define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */
-#define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */
- /* ser. port 1: */
-#define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */
-#define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */
-#define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */
-#define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */
-#define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */
- /* ser. port 4: */
-#define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */
- /* ser. port 3: */
-#define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */
- /* ser. port 4: */
-#define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */
- /* test controller: */
-#define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */
-#define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */
-#define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */
-#define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */
-#define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */
-#define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */
+#define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */
+#define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */
+#define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */
+#define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */
+#define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */
+#define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */
+#define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */
+#define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */
+ /* ser. port 4: */
+#define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */
+#define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */
+#define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */
+#define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */
+ /* ser. port 1: */
+#define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */
+#define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */
+#define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */
+#define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */
+#define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */
+ /* ser. port 4: */
+#define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */
+ /* ser. port 3: */
+#define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */
+ /* ser. port 4: */
+#define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */
+ /* test controller: */
+#define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */
+#define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */
+#define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */
+#define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */
+#define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */
+#define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */
#define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */
-#define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */
+#define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */
-#define GPDR_In 0 /* Input */
-#define GPDR_Out 1 /* Output */
+#define GPDR_In 0 /* Input */
+#define GPDR_Out 1 /* Output */
/*
* Interrupt Controller (IC) control registers
*
* Registers
- * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ)
- * Pending register (read).
- * ICMR Interrupt Controller (IC) Mask Register (read/write).
- * ICLR Interrupt Controller (IC) Level Register (read/write).
- * ICCR Interrupt Controller (IC) Control Register
- * (read/write).
- * [The ICCR register is only implemented in versions 2.0
- * (rev. = 8) and higher of the StrongARM SA-1100.]
- * ICFP Interrupt Controller (IC) Fast Interrupt reQuest
- * (FIQ) Pending register (read).
- * ICPR Interrupt Controller (IC) Pending Register (read).
- * [The ICPR register is active low (inverted) in
- * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- * StrongARM SA-1100, it is active high (non-inverted) in
- * versions 2.0 (rev. = 8) and higher.]
+ * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ)
+ * Pending register (read).
+ * ICMR Interrupt Controller (IC) Mask Register (read/write).
+ * ICLR Interrupt Controller (IC) Level Register (read/write).
+ * ICCR Interrupt Controller (IC) Control Register
+ * (read/write).
+ * [The ICCR register is only implemented in versions 2.0
+ * (rev. = 8) and higher of the StrongARM SA-1100.]
+ * ICFP Interrupt Controller (IC) Fast Interrupt reQuest
+ * (FIQ) Pending register (read).
+ * ICPR Interrupt Controller (IC) Pending Register (read).
+ * [The ICPR register is active low (inverted) in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it is active high (non-inverted) in
+ * versions 2.0 (rev. = 8) and higher.]
*/
-#define _ICIP 0x90050000 /* IC IRQ Pending reg. */
-#define _ICMR 0x90050004 /* IC Mask Reg. */
-#define _ICLR 0x90050008 /* IC Level Reg. */
-#define _ICCR 0x9005000C /* IC Control Reg. */
-#define _ICFP 0x90050010 /* IC FIQ Pending reg. */
-#define _ICPR 0x90050020 /* IC Pending Reg. */
+#define _ICIP 0x90050000 /* IC IRQ Pending reg. */
+#define _ICMR 0x90050004 /* IC Mask Reg. */
+#define _ICLR 0x90050008 /* IC Level Reg. */
+#define _ICCR 0x9005000C /* IC Control Reg. */
+#define _ICFP 0x90050010 /* IC FIQ Pending reg. */
+#define _ICPR 0x90050020 /* IC Pending Reg. */
#if LANGUAGE == C
-#define ICIP /* IC IRQ Pending reg. */ \
+#define ICIP /* IC IRQ Pending reg. */ \
(*((volatile Word *) io_p2v (_ICIP)))
-#define ICMR /* IC Mask Reg. */ \
+#define ICMR /* IC Mask Reg. */ \
(*((volatile Word *) io_p2v (_ICMR)))
-#define ICLR /* IC Level Reg. */ \
+#define ICLR /* IC Level Reg. */ \
(*((volatile Word *) io_p2v (_ICLR)))
-#define ICCR /* IC Control Reg. */ \
+#define ICCR /* IC Control Reg. */ \
(*((volatile Word *) io_p2v (_ICCR)))
-#define ICFP /* IC FIQ Pending reg. */ \
+#define ICFP /* IC FIQ Pending reg. */ \
(*((volatile Word *) io_p2v (_ICFP)))
-#define ICPR /* IC Pending Reg. */ \
+#define ICPR /* IC Pending Reg. */ \
(*((volatile Word *) io_p2v (_ICPR)))
#endif /* LANGUAGE == C */
-#define IC_GPIO(Nb) /* GPIO [0..10] */ \
+#define IC_GPIO(Nb) /* GPIO [0..10] */ \
(0x00000001 << (Nb))
-#define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */
-#define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */
-#define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */
-#define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */
-#define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */
-#define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */
-#define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */
-#define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */
-#define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */
-#define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */
-#define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */
-#define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */
-#define IC_LCD 0x00001000 /* LCD controller */
-#define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */
-#define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */
-#define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */
-#define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */
-#define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */
-#define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */
-#define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */
-#define IC_DMA(Nb) /* DMA controller channel [0..5] */ \
+#define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */
+#define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */
+#define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */
+#define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */
+#define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */
+#define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */
+#define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */
+#define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */
+#define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */
+#define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */
+#define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */
+#define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */
+#define IC_LCD 0x00001000 /* LCD controller */
+#define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */
+#define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */
+#define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */
+#define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */
+#define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */
+#define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */
+#define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */
+#define IC_DMA(Nb) /* DMA controller channel [0..5] */ \
(0x00100000 << (Nb))
-#define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */
-#define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */
-#define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */
-#define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */
-#define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */
-#define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */
-#define IC_OST(Nb) /* OS Timer match [0..3] */ \
+#define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */
+#define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */
+#define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */
+#define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */
+#define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */
+#define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */
+#define IC_OST(Nb) /* OS Timer match [0..3] */ \
(0x04000000 << (Nb))
-#define IC_OST0 IC_OST (0) /* OS Timer match 0 */
-#define IC_OST1 IC_OST (1) /* OS Timer match 1 */
-#define IC_OST2 IC_OST (2) /* OS Timer match 2 */
-#define IC_OST3 IC_OST (3) /* OS Timer match 3 */
-#define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */
-#define IC_RTCAlrm 0x80000000 /* RTC Alarm */
-
-#define ICLR_IRQ 0 /* Interrupt ReQuest */
-#define ICLR_FIQ 1 /* Fast Interrupt reQuest */
-
-#define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */
- /* Mask */
+#define IC_OST0 IC_OST (0) /* OS Timer match 0 */
+#define IC_OST1 IC_OST (1) /* OS Timer match 1 */
+#define IC_OST2 IC_OST (2) /* OS Timer match 2 */
+#define IC_OST3 IC_OST (3) /* OS Timer match 3 */
+#define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */
+#define IC_RTCAlrm 0x80000000 /* RTC Alarm */
+
+#define ICLR_IRQ 0 /* Interrupt ReQuest */
+#define ICLR_FIQ 1 /* Fast Interrupt reQuest */
+
+#define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */
+ /* Mask */
#define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */
- /* (ICMR ignored) */
+ /* (ICMR ignored) */
#define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */
- /* enable (ICMR used) */
+ /* enable (ICMR used) */
/*
* Peripheral Pin Controller (PPC) control registers
*
* Registers
- * PPDR Peripheral Pin Controller (PPC) Pin Direction
- * Register (read/write).
- * PPSR Peripheral Pin Controller (PPC) Pin State Register
- * (read/write).
- * PPAR Peripheral Pin Controller (PPC) Pin Assignment
- * Register (read/write).
- * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin
- * Direction Register (read/write).
- * PPFR Peripheral Pin Controller (PPC) Pin Flag Register
- * (read).
+ * PPDR Peripheral Pin Controller (PPC) Pin Direction
+ * Register (read/write).
+ * PPSR Peripheral Pin Controller (PPC) Pin State Register
+ * (read/write).
+ * PPAR Peripheral Pin Controller (PPC) Pin Assignment
+ * Register (read/write).
+ * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin
+ * Direction Register (read/write).
+ * PPFR Peripheral Pin Controller (PPC) Pin Flag Register
+ * (read).
*/
-#define _PPDR 0x90060000 /* PPC Pin Direction Reg. */
-#define _PPSR 0x90060004 /* PPC Pin State Reg. */
-#define _PPAR 0x90060008 /* PPC Pin Assignment Reg. */
-#define _PSDR 0x9006000C /* PPC Sleep-mode pin Direction */
- /* Reg. */
-#define _PPFR 0x90060010 /* PPC Pin Flag Reg. */
+#define _PPDR 0x90060000 /* PPC Pin Direction Reg. */
+#define _PPSR 0x90060004 /* PPC Pin State Reg. */
+#define _PPAR 0x90060008 /* PPC Pin Assignment Reg. */
+#define _PSDR 0x9006000C /* PPC Sleep-mode pin Direction */
+ /* Reg. */
+#define _PPFR 0x90060010 /* PPC Pin Flag Reg. */
#if LANGUAGE == C
-#define PPDR /* PPC Pin Direction Reg. */ \
+#define PPDR /* PPC Pin Direction Reg. */ \
(*((volatile Word *) io_p2v (_PPDR)))
-#define PPSR /* PPC Pin State Reg. */ \
+#define PPSR /* PPC Pin State Reg. */ \
(*((volatile Word *) io_p2v (_PPSR)))
-#define PPAR /* PPC Pin Assignment Reg. */ \
+#define PPAR /* PPC Pin Assignment Reg. */ \
(*((volatile Word *) io_p2v (_PPAR)))
-#define PSDR /* PPC Sleep-mode pin Direction */ \
- /* Reg. */ \
+#define PSDR /* PPC Sleep-mode pin Direction */ \
+ /* Reg. */ \
(*((volatile Word *) io_p2v (_PSDR)))
-#define PPFR /* PPC Pin Flag Reg. */ \
+#define PPFR /* PPC Pin Flag Reg. */ \
(*((volatile Word *) io_p2v (_PPFR)))
#endif /* LANGUAGE == C */
-#define PPC_LDD(Nb) /* LCD Data [0..7] */ \
+#define PPC_LDD(Nb) /* LCD Data [0..7] */ \
(0x00000001 << (Nb))
-#define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */
-#define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */
-#define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */
-#define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */
-#define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */
-#define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */
-#define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */
-#define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */
-#define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */
-#define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */
-#define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */
-#define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */
- /* ser. port 1: */
-#define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */
-#define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */
- /* ser. port 2: */
-#define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */
-#define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */
- /* ser. port 3: */
-#define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */
-#define PPC_RXD3 0x00020000 /* UART Receive Data 3 */
- /* ser. port 4: */
-#define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */
-#define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */
-#define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */
-#define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */
-
-#define PPDR_In 0 /* Input */
-#define PPDR_Out 1 /* Output */
-
- /* ser. port 1: */
-#define PPAR_UPR 0x00001000 /* UART Pin Reassignment */
-#define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */
-#define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */
- /* ser. port 4: */
-#define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */
+#define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */
+#define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */
+#define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */
+#define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */
+#define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */
+#define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */
+#define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */
+#define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */
+#define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */
+#define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */
+#define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */
+#define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */
+ /* ser. port 1: */
+#define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */
+#define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */
+ /* ser. port 2: */
+#define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */
+#define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */
+ /* ser. port 3: */
+#define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */
+#define PPC_RXD3 0x00020000 /* UART Receive Data 3 */
+ /* ser. port 4: */
+#define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */
+#define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */
+#define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */
+#define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */
+
+#define PPDR_In 0 /* Input */
+#define PPDR_Out 1 /* Output */
+
+ /* ser. port 1: */
+#define PPAR_UPR 0x00001000 /* UART Pin Reassignment */
+#define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */
+#define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */
+ /* ser. port 4: */
+#define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */
#define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */
- /* & SFRM_C */
-#define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */
+ /* & SFRM_C */
+#define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */
-#define PSDR_OutL 0 /* Output Low in sleep mode */
-#define PSDR_Flt 1 /* Floating (input) in sleep mode */
+#define PSDR_OutL 0 /* Output Low in sleep mode */
+#define PSDR_Flt 1 /* Floating (input) in sleep mode */
-#define PPFR_LCD 0x00000001 /* LCD controller */
+#define PPFR_LCD 0x00000001 /* LCD controller */
#define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */
#define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */
-#define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */
-#define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */
-#define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */
-#define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */
-#define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */
-#define PPFR_PerEn 0 /* Peripheral Enabled */
-#define PPFR_PPCEn 1 /* PPC Enabled */
+#define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */
+#define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */
+#define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */
+#define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */
+#define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */
+#define PPFR_PerEn 0 /* Peripheral Enabled */
+#define PPFR_PPCEn 1 /* PPC Enabled */
/*
* Dynamic Random-Access Memory (DRAM) control registers
*
* Registers
- * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM)
- * CoNFiGuration register (read/write).
- * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM)
- * Column Address Strobe (CAS) shift register 0
- * (read/write).
- * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM)
- * Column Address Strobe (CAS) shift register 1
- * (read/write).
- * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM)
- * Column Address Strobe (CAS) shift register 2
- * (read/write).
+ * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM)
+ * CoNFiGuration register (read/write).
+ * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 0
+ * (read/write).
+ * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 1
+ * (read/write).
+ * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 2
+ * (read/write).
*
* Clocks
* fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
@@ -1811,23 +1811,23 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* fcas, Tcas Frequency, period of the DRAM CAS shift registers.
*/
- /* Memory system: */
-#define _MDCNFG 0xA0000000 /* DRAM CoNFiGuration reg. */
-#define _MDCAS(Nb) /* DRAM CAS shift reg. [0..3] */ \
+ /* Memory system: */
+#define _MDCNFG 0xA0000000 /* DRAM CoNFiGuration reg. */
+#define _MDCAS(Nb) /* DRAM CAS shift reg. [0..3] */ \
(0xA0000004 + (Nb)*4)
-#define _MDCAS0 _MDCAS (0) /* DRAM CAS shift reg. 0 */
-#define _MDCAS1 _MDCAS (1) /* DRAM CAS shift reg. 1 */
-#define _MDCAS2 _MDCAS (2) /* DRAM CAS shift reg. 2 */
+#define _MDCAS0 _MDCAS (0) /* DRAM CAS shift reg. 0 */
+#define _MDCAS1 _MDCAS (1) /* DRAM CAS shift reg. 1 */
+#define _MDCAS2 _MDCAS (2) /* DRAM CAS shift reg. 2 */
#if LANGUAGE == C
- /* Memory system: */
-#define MDCNFG /* DRAM CoNFiGuration reg. */ \
+ /* Memory system: */
+#define MDCNFG /* DRAM CoNFiGuration reg. */ \
(*((volatile Word *) io_p2v (_MDCNFG)))
-#define MDCAS /* DRAM CAS shift reg. [0..3] */ \
+#define MDCAS /* DRAM CAS shift reg. [0..3] */ \
((volatile Word *) io_p2v (_MDCAS (0)))
-#define MDCAS0 (MDCAS [0]) /* DRAM CAS shift reg. 0 */
-#define MDCAS1 (MDCAS [1]) /* DRAM CAS shift reg. 1 */
-#define MDCAS2 (MDCAS [2]) /* DRAM CAS shift reg. 2 */
+#define MDCAS0 (MDCAS [0]) /* DRAM CAS shift reg. 0 */
+#define MDCAS1 (MDCAS [1]) /* DRAM CAS shift reg. 1 */
+#define MDCAS2 (MDCAS [2]) /* DRAM CAS shift reg. 2 */
#elif LANGUAGE == Assembly
@@ -1836,58 +1836,58 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
#endif /* LANGUAGE == C */
/* SA1100 MDCNFG values */
-#define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \
+#define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \
(0x00000001 << (Nb))
-#define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */
-#define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */
-#define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */
-#define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */
-#define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */
-#define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \
+#define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */
+#define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */
+#define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */
+#define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */
+#define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */
+#define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \
(((Add) - 9) << FShft (MDCNFG_DRAC))
#define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */
- /* (fcas = fcpu/2) */
+ /* (fcas = fcpu/2) */
#define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */
-#define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \
+#define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \
(((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
-#define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \
+#define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \
(((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
-#define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */
-#define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \
+#define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */
+#define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \
(((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
-#define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \
+#define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \
(((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
-#define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */
-#define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \
+#define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */
+#define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \
((Tcpu) << FShft (MDCNFG_TDL))
#define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */
- /* [Tmem] */
-#define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \
- /* [0..262136 Tcpu] */ \
+ /* [Tmem] */
+#define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \
+ /* [0..262136 Tcpu] */ \
((Tcpu)/8 << FShft (MDCNFG_DRI))
/* SA1110 MDCNFG values */
-#define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */
-#define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */
+#define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */
+#define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */
#define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */
-#define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */
+#define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */
#define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */
- /* bank 0/1 */
+ /* bank 0/1 */
#define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */
-#define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */
+#define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */
#define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/
- /* deassertion 0/1 */
+ /* deassertion 0/1 */
#define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */
-#define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */
-#define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */
+#define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */
+#define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */
#define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */
-#define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */
+#define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */
#define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */
- /* bank 0/1 */
+ /* bank 0/1 */
#define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */
-#define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */
+#define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */
#define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/
- /* deassertion 0/1 */
+ /* deassertion 0/1 */
#define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */
@@ -1895,32 +1895,32 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* Static memory control registers
*
* Registers
- * MSC0 Memory system: Static memory Control register 0
- * (read/write).
- * MSC1 Memory system: Static memory Control register 1
- * (read/write).
+ * MSC0 Memory system: Static memory Control register 0
+ * (read/write).
+ * MSC1 Memory system: Static memory Control register 1
+ * (read/write).
*
* Clocks
* fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
* fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
*/
- /* Memory system: */
-#define _MSC(Nb) /* Static memory Control reg. */ \
- /* [0..1] */ \
+ /* Memory system: */
+#define _MSC(Nb) /* Static memory Control reg. */ \
+ /* [0..1] */ \
(0xA0000010 + (Nb)*4)
-#define _MSC0 _MSC (0) /* Static memory Control reg. 0 */
-#define _MSC1 _MSC (1) /* Static memory Control reg. 1 */
+#define _MSC0 _MSC (0) /* Static memory Control reg. 0 */
+#define _MSC1 _MSC (1) /* Static memory Control reg. 1 */
#define _MSC2 0xA000002C /* Static memory Control reg. 2, not contiguous */
#if LANGUAGE == C
- /* Memory system: */
-#define MSC /* Static memory Control reg. */ \
- /* [0..1] */ \
+ /* Memory system: */
+#define MSC /* Static memory Control reg. */ \
+ /* [0..1] */ \
((volatile Word *) io_p2v (_MSC (0)))
-#define MSC0 (MSC [0]) /* Static memory Control reg. 0 */
-#define MSC1 (MSC [1]) /* Static memory Control reg. 1 */
-#define MSC2 (*(volatile Word *) io_p2v (_MSC2)) /* Static memory Control reg. 2 */
+#define MSC0 (MSC [0]) /* Static memory Control reg. 0 */
+#define MSC1 (MSC [1]) /* Static memory Control reg. 1 */
+#define MSC2 (*(volatile Word *) io_p2v (_MSC2)) /* Static memory Control reg. 2 */
#elif LANGUAGE == Assembly
@@ -1930,54 +1930,54 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
#endif /* LANGUAGE == C */
-#define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \
+#define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \
Fld (16, ((Nb) Modulo 2)*16)
-#define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */
-#define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */
-#define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */
-#define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */
+#define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */
+#define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */
+#define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */
+#define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */
-#define MSC_RT Fld (2, 0) /* ROM/static memory Type */
-#define MSC_NonBrst /* Non-Burst static memory */ \
+#define MSC_RT Fld (2, 0) /* ROM/static memory Type */
+#define MSC_NonBrst /* Non-Burst static memory */ \
(0 << FShft (MSC_RT))
-#define MSC_SRAM /* 32-bit byte-writable SRAM */ \
+#define MSC_SRAM /* 32-bit byte-writable SRAM */ \
(1 << FShft (MSC_RT))
-#define MSC_Brst4 /* Burst-of-4 static memory */ \
+#define MSC_Brst4 /* Burst-of-4 static memory */ \
(2 << FShft (MSC_RT))
-#define MSC_Brst8 /* Burst-of-8 static memory */ \
+#define MSC_Brst8 /* Burst-of-8 static memory */ \
(3 << FShft (MSC_RT))
-#define MSC_RBW 0x0004 /* ROM/static memory Bus Width */
-#define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */
-#define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */
-#define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */
- /* First access - 1(.5) [Tmem] */
-#define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \
+#define MSC_RBW 0x0004 /* ROM/static memory Bus Width */
+#define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */
+#define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */
+#define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */
+ /* First access - 1(.5) [Tmem] */
+#define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \
/* static memory) [3..65 Tcpu] */ \
((((Tcpu) - 3)/2) << FShft (MSC_RDF))
-#define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \
+#define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \
((((Tcpu) - 2)/2) << FShft (MSC_RDF))
-#define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \
+#define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \
/* static memory) [2..64 Tcpu] */ \
((((Tcpu) - 2)/2) << FShft (MSC_RDF))
-#define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \
+#define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \
((((Tcpu) - 1)/2) << FShft (MSC_RDF))
-#define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */
- /* Next access - 1 [Tmem] */
-#define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \
+#define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */
+ /* Next access - 1 [Tmem] */
+#define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \
/* static memory) [2..64 Tcpu] */ \
((((Tcpu) - 2)/2) << FShft (MSC_RDN))
-#define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \
+#define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \
((((Tcpu) - 1)/2) << FShft (MSC_RDN))
-#define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \
+#define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \
/* static memory) [2..64 Tcpu] */ \
((((Tcpu) - 2)/2) << FShft (MSC_RDN))
-#define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \
+#define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \
((((Tcpu) - 1)/2) << FShft (MSC_RDN))
-#define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */
- /* time/2 [Tmem] */
-#define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \
+#define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */
+ /* time/2 [Tmem] */
+#define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \
(((Tcpu)/4) << FShft (MSC_RRR))
-#define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \
+#define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \
((((Tcpu) + 3)/4) << FShft (MSC_RRR))
@@ -1986,8 +1986,8 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* register
*
* Register
- * MECR Memory system: Expansion memory bus (PCMCIA)
- * Configuration Register (read/write).
+ * MECR Memory system: Expansion memory bus (PCMCIA)
+ * Configuration Register (read/write).
*
* Clocks
* fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
@@ -1995,37 +1995,37 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK).
*/
- /* Memory system: */
-#define _MECR 0xA0000018 /* Expansion memory bus (PCMCIA) */
- /* Configuration Reg. */
+ /* Memory system: */
+#define _MECR 0xA0000018 /* Expansion memory bus (PCMCIA) */
+ /* Configuration Reg. */
#if LANGUAGE == C
- /* Memory system: */
-#define MECR /* Expansion memory bus (PCMCIA) */ \
- /* Configuration Reg. */ \
+ /* Memory system: */
+#define MECR /* Expansion memory bus (PCMCIA) */ \
+ /* Configuration Reg. */ \
(*((volatile Word *) io_p2v (_MECR)))
#endif /* LANGUAGE == C */
-#define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \
+#define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \
Fld (15, (Nb)*16)
-#define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */
-#define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */
+#define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */
+#define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */
-#define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */
-#define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \
+#define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */
+#define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \
((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
-#define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \
+#define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \
((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
-#define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */
- /* [Tmem] */
-#define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \
+#define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */
+ /* [Tmem] */
+#define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \
((((Tcpu) - 2)/2) << FShft (MECR_BSA))
-#define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \
+#define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \
((((Tcpu) - 1)/2) << FShft (MECR_BSA))
#define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */
-#define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \
+#define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \
((((Tcpu) - 2)/2) << FShft (MECR_BSM))
-#define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \
+#define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \
((((Tcpu) - 1)/2) << FShft (MECR_BSM))
/*
@@ -2035,7 +2035,7 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
#define _MDREFR 0xA000001C
#if LANGUAGE == C
- /* Memory system: */
+ /* Memory system: */
#define MDREFR \
(*((volatile Word *) io_p2v (_MDREFR)))
@@ -2064,769 +2064,769 @@ typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
* Direct Memory Access (DMA) control registers
*
* Registers
- * DDAR0 Direct Memory Access (DMA) Device Address Register
- * channel 0 (read/write).
- * DCSR0 Direct Memory Access (DMA) Control and Status
- * Register channel 0 (read/write).
- * DBSA0 Direct Memory Access (DMA) Buffer Start address
- * register A channel 0 (read/write).
- * DBTA0 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 0 (read/write).
- * DBSB0 Direct Memory Access (DMA) Buffer Start address
- * register B channel 0 (read/write).
- * DBTB0 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 0 (read/write).
+ * DDAR0 Direct Memory Access (DMA) Device Address Register
+ * channel 0 (read/write).
+ * DCSR0 Direct Memory Access (DMA) Control and Status
+ * Register channel 0 (read/write).
+ * DBSA0 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 0 (read/write).
+ * DBTA0 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 0 (read/write).
+ * DBSB0 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 0 (read/write).
+ * DBTB0 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 0 (read/write).
*
- * DDAR1 Direct Memory Access (DMA) Device Address Register
- * channel 1 (read/write).
- * DCSR1 Direct Memory Access (DMA) Control and Status
- * Register channel 1 (read/write).
- * DBSA1 Direct Memory Access (DMA) Buffer Start address
- * register A channel 1 (read/write).
- * DBTA1 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 1 (read/write).
- * DBSB1 Direct Memory Access (DMA) Buffer Start address
- * register B channel 1 (read/write).
- * DBTB1 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 1 (read/write).
+ * DDAR1 Direct Memory Access (DMA) Device Address Register
+ * channel 1 (read/write).
+ * DCSR1 Direct Memory Access (DMA) Control and Status
+ * Register channel 1 (read/write).
+ * DBSA1 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 1 (read/write).
+ * DBTA1 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 1 (read/write).
+ * DBSB1 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 1 (read/write).
+ * DBTB1 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 1 (read/write).
*
- * DDAR2 Direct Memory Access (DMA) Device Address Register
- * channel 2 (read/write).
- * DCSR2 Direct Memory Access (DMA) Control and Status
- * Register channel 2 (read/write).
- * DBSA2 Direct Memory Access (DMA) Buffer Start address
- * register A channel 2 (read/write).
- * DBTA2 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 2 (read/write).
- * DBSB2 Direct Memory Access (DMA) Buffer Start address
- * register B channel 2 (read/write).
- * DBTB2 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 2 (read/write).
+ * DDAR2 Direct Memory Access (DMA) Device Address Register
+ * channel 2 (read/write).
+ * DCSR2 Direct Memory Access (DMA) Control and Status
+ * Register channel 2 (read/write).
+ * DBSA2 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 2 (read/write).
+ * DBTA2 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 2 (read/write).
+ * DBSB2 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 2 (read/write).
+ * DBTB2 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 2 (read/write).
*
- * DDAR3 Direct Memory Access (DMA) Device Address Register
- * channel 3 (read/write).
- * DCSR3 Direct Memory Access (DMA) Control and Status
- * Register channel 3 (read/write).
- * DBSA3 Direct Memory Access (DMA) Buffer Start address
- * register A channel 3 (read/write).
- * DBTA3 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 3 (read/write).
- * DBSB3 Direct Memory Access (DMA) Buffer Start address
- * register B channel 3 (read/write).
- * DBTB3 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 3 (read/write).
+ * DDAR3 Direct Memory Access (DMA) Device Address Register
+ * channel 3 (read/write).
+ * DCSR3 Direct Memory Access (DMA) Control and Status
+ * Register channel 3 (read/write).
+ * DBSA3 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 3 (read/write).
+ * DBTA3 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 3 (read/write).
+ * DBSB3 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 3 (read/write).
+ * DBTB3 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 3 (read/write).
*
- * DDAR4 Direct Memory Access (DMA) Device Address Register
- * channel 4 (read/write).
- * DCSR4 Direct Memory Access (DMA) Control and Status
- * Register channel 4 (read/write).
- * DBSA4 Direct Memory Access (DMA) Buffer Start address
- * register A channel 4 (read/write).
- * DBTA4 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 4 (read/write).
- * DBSB4 Direct Memory Access (DMA) Buffer Start address
- * register B channel 4 (read/write).
- * DBTB4 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 4 (read/write).
+ * DDAR4 Direct Memory Access (DMA) Device Address Register
+ * channel 4 (read/write).
+ * DCSR4 Direct Memory Access (DMA) Control and Status
+ * Register channel 4 (read/write).
+ * DBSA4 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 4 (read/write).
+ * DBTA4 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 4 (read/write).
+ * DBSB4 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 4 (read/write).
+ * DBTB4 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 4 (read/write).
*
- * DDAR5 Direct Memory Access (DMA) Device Address Register
- * channel 5 (read/write).
- * DCSR5 Direct Memory Access (DMA) Control and Status
- * Register channel 5 (read/write).
- * DBSA5 Direct Memory Access (DMA) Buffer Start address
- * register A channel 5 (read/write).
- * DBTA5 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 5 (read/write).
- * DBSB5 Direct Memory Access (DMA) Buffer Start address
- * register B channel 5 (read/write).
- * DBTB5 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 5 (read/write).
+ * DDAR5 Direct Memory Access (DMA) Device Address Register
+ * channel 5 (read/write).
+ * DCSR5 Direct Memory Access (DMA) Control and Status
+ * Register channel 5 (read/write).
+ * DBSA5 Direct Memory Access (DMA) Buffer Start address
+ * register A channel 5 (read/write).
+ * DBTA5 Direct Memory Access (DMA) Buffer Transfer count
+ * register A channel 5 (read/write).
+ * DBSB5 Direct Memory Access (DMA) Buffer Start address
+ * register B channel 5 (read/write).
+ * DBTB5 Direct Memory Access (DMA) Buffer Transfer count
+ * register B channel 5 (read/write).
*/
-#define DMASp 0x00000020 /* DMA control reg. Space [byte] */
+#define DMASp 0x00000020 /* DMA control reg. Space [byte] */
-#define _DDAR(Nb) /* DMA Device Address Reg. */ \
- /* channel [0..5] */ \
+#define _DDAR(Nb) /* DMA Device Address Reg. */ \
+ /* channel [0..5] */ \
(0xB0000000 + (Nb)*DMASp)
-#define _SetDCSR(Nb) /* Set DMA Control & Status Reg. */ \
- /* channel [0..5] (write) */ \
+#define _SetDCSR(Nb) /* Set DMA Control & Status Reg. */ \
+ /* channel [0..5] (write) */ \
(0xB0000004 + (Nb)*DMASp)
-#define _ClrDCSR(Nb) /* Clear DMA Control & Status Reg. */ \
- /* channel [0..5] (write) */ \
+#define _ClrDCSR(Nb) /* Clear DMA Control & Status Reg. */ \
+ /* channel [0..5] (write) */ \
(0xB0000008 + (Nb)*DMASp)
-#define _RdDCSR(Nb) /* Read DMA Control & Status Reg. */ \
- /* channel [0..5] (read) */ \
+#define _RdDCSR(Nb) /* Read DMA Control & Status Reg. */ \
+ /* channel [0..5] (read) */ \
(0xB000000C + (Nb)*DMASp)
-#define _DBSA(Nb) /* DMA Buffer Start address reg. A */ \
- /* channel [0..5] */ \
+#define _DBSA(Nb) /* DMA Buffer Start address reg. A */ \
+ /* channel [0..5] */ \
(0xB0000010 + (Nb)*DMASp)
-#define _DBTA(Nb) /* DMA Buffer Transfer count */ \
- /* reg. A channel [0..5] */ \
+#define _DBTA(Nb) /* DMA Buffer Transfer count */ \
+ /* reg. A channel [0..5] */ \
(0xB0000014 + (Nb)*DMASp)
-#define _DBSB(Nb) /* DMA Buffer Start address reg. B */ \
- /* channel [0..5] */ \
+#define _DBSB(Nb) /* DMA Buffer Start address reg. B */ \
+ /* channel [0..5] */ \
(0xB0000018 + (Nb)*DMASp)
-#define _DBTB(Nb) /* DMA Buffer Transfer count */ \
- /* reg. B channel [0..5] */ \
+#define _DBTB(Nb) /* DMA Buffer Transfer count */ \
+ /* reg. B channel [0..5] */ \
(0xB000001C + (Nb)*DMASp)
-#define _DDAR0 _DDAR (0) /* DMA Device Address Reg. */
- /* channel 0 */
+#define _DDAR0 _DDAR (0) /* DMA Device Address Reg. */
+ /* channel 0 */
#define _SetDCSR0 _SetDCSR (0) /* Set DMA Control & Status Reg. */
- /* channel 0 (write) */
+ /* channel 0 (write) */
#define _ClrDCSR0 _ClrDCSR (0) /* Clear DMA Control & Status Reg. */
- /* channel 0 (write) */
+ /* channel 0 (write) */
#define _RdDCSR0 _RdDCSR (0) /* Read DMA Control & Status Reg. */
- /* channel 0 (read) */
-#define _DBSA0 _DBSA (0) /* DMA Buffer Start address reg. A */
- /* channel 0 */
-#define _DBTA0 _DBTA (0) /* DMA Buffer Transfer count */
- /* reg. A channel 0 */
-#define _DBSB0 _DBSB (0) /* DMA Buffer Start address reg. B */
- /* channel 0 */
-#define _DBTB0 _DBTB (0) /* DMA Buffer Transfer count */
- /* reg. B channel 0 */
-
-#define _DDAR1 _DDAR (1) /* DMA Device Address Reg. */
- /* channel 1 */
+ /* channel 0 (read) */
+#define _DBSA0 _DBSA (0) /* DMA Buffer Start address reg. A */
+ /* channel 0 */
+#define _DBTA0 _DBTA (0) /* DMA Buffer Transfer count */
+ /* reg. A channel 0 */
+#define _DBSB0 _DBSB (0) /* DMA Buffer Start address reg. B */
+ /* channel 0 */
+#define _DBTB0 _DBTB (0) /* DMA Buffer Transfer count */
+ /* reg. B channel 0 */
+
+#define _DDAR1 _DDAR (1) /* DMA Device Address Reg. */
+ /* channel 1 */
#define _SetDCSR1 _SetDCSR (1) /* Set DMA Control & Status Reg. */
- /* channel 1 (write) */
+ /* channel 1 (write) */
#define _ClrDCSR1 _ClrDCSR (1) /* Clear DMA Control & Status Reg. */
- /* channel 1 (write) */
+ /* channel 1 (write) */
#define _RdDCSR1 _RdDCSR (1) /* Read DMA Control & Status Reg. */
- /* channel 1 (read) */
-#define _DBSA1 _DBSA (1) /* DMA Buffer Start address reg. A */
- /* channel 1 */
-#define _DBTA1 _DBTA (1) /* DMA Buffer Transfer count */
- /* reg. A channel 1 */
-#define _DBSB1 _DBSB (1) /* DMA Buffer Start address reg. B */
- /* channel 1 */
-#define _DBTB1 _DBTB (1) /* DMA Buffer Transfer count */
- /* reg. B channel 1 */
-
-#define _DDAR2 _DDAR (2) /* DMA Device Address Reg. */
- /* channel 2 */
+ /* channel 1 (read) */
+#define _DBSA1 _DBSA (1) /* DMA Buffer Start address reg. A */
+ /* channel 1 */
+#define _DBTA1 _DBTA (1) /* DMA Buffer Transfer count */
+ /* reg. A channel 1 */
+#define _DBSB1 _DBSB (1) /* DMA Buffer Start address reg. B */
+ /* channel 1 */
+#define _DBTB1 _DBTB (1) /* DMA Buffer Transfer count */
+ /* reg. B channel 1 */
+
+#define _DDAR2 _DDAR (2) /* DMA Device Address Reg. */
+ /* channel 2 */
#define _SetDCSR2 _SetDCSR (2) /* Set DMA Control & Status Reg. */
- /* channel 2 (write) */
+ /* channel 2 (write) */
#define _ClrDCSR2 _ClrDCSR (2) /* Clear DMA Control & Status Reg. */
- /* channel 2 (write) */
+ /* channel 2 (write) */
#define _RdDCSR2 _RdDCSR (2) /* Read DMA Control & Status Reg. */
- /* channel 2 (read) */
-#define _DBSA2 _DBSA (2) /* DMA Buffer Start address reg. A */
- /* channel 2 */
-#define _DBTA2 _DBTA (2) /* DMA Buffer Transfer count */
- /* reg. A channel 2 */
-#define _DBSB2 _DBSB (2) /* DMA Buffer Start address reg. B */
- /* channel 2 */
-#define _DBTB2 _DBTB (2) /* DMA Buffer Transfer count */
- /* reg. B channel 2 */
-
-#define _DDAR3 _DDAR (3) /* DMA Device Address Reg. */
- /* channel 3 */
+ /* channel 2 (read) */
+#define _DBSA2 _DBSA (2) /* DMA Buffer Start address reg. A */
+ /* channel 2 */
+#define _DBTA2 _DBTA (2) /* DMA Buffer Transfer count */
+ /* reg. A channel 2 */
+#define _DBSB2 _DBSB (2) /* DMA Buffer Start address reg. B */
+ /* channel 2 */
+#define _DBTB2 _DBTB (2) /* DMA Buffer Transfer count */
+ /* reg. B channel 2 */
+
+#define _DDAR3 _DDAR (3) /* DMA Device Address Reg. */
+ /* channel 3 */
#define _SetDCSR3 _SetDCSR (3) /* Set DMA Control & Status Reg. */
- /* channel 3 (write) */
+ /* channel 3 (write) */
#define _ClrDCSR3 _ClrDCSR (3) /* Clear DMA Control & Status Reg. */
- /* channel 3 (write) */
+ /* channel 3 (write) */
#define _RdDCSR3 _RdDCSR (3) /* Read DMA Control & Status Reg. */
- /* channel 3 (read) */
-#define _DBSA3 _DBSA (3) /* DMA Buffer Start address reg. A */
- /* channel 3 */
-#define _DBTA3 _DBTA (3) /* DMA Buffer Transfer count */
- /* reg. A channel 3 */
-#define _DBSB3 _DBSB (3) /* DMA Buffer Start address reg. B */
- /* channel 3 */
-#define _DBTB3 _DBTB (3) /* DMA Buffer Transfer count */
- /* reg. B channel 3 */
-
-#define _DDAR4 _DDAR (4) /* DMA Device Address Reg. */
- /* channel 4 */
+ /* channel 3 (read) */
+#define _DBSA3 _DBSA (3) /* DMA Buffer Start address reg. A */
+ /* channel 3 */
+#define _DBTA3 _DBTA (3) /* DMA Buffer Transfer count */
+ /* reg. A channel 3 */
+#define _DBSB3 _DBSB (3) /* DMA Buffer Start address reg. B */
+ /* channel 3 */
+#define _DBTB3 _DBTB (3) /* DMA Buffer Transfer count */
+ /* reg. B channel 3 */
+
+#define _DDAR4 _DDAR (4) /* DMA Device Address Reg. */
+ /* channel 4 */
#define _SetDCSR4 _SetDCSR (4) /* Set DMA Control & Status Reg. */
- /* channel 4 (write) */
+ /* channel 4 (write) */
#define _ClrDCSR4 _ClrDCSR (4) /* Clear DMA Control & Status Reg. */
- /* channel 4 (write) */
+ /* channel 4 (write) */
#define _RdDCSR4 _RdDCSR (4) /* Read DMA Control & Status Reg. */
- /* channel 4 (read) */
-#define _DBSA4 _DBSA (4) /* DMA Buffer Start address reg. A */
- /* channel 4 */
-#define _DBTA4 _DBTA (4) /* DMA Buffer Transfer count */
- /* reg. A channel 4 */
-#define _DBSB4 _DBSB (4) /* DMA Buffer Start address reg. B */
- /* channel 4 */
-#define _DBTB4 _DBTB (4) /* DMA Buffer Transfer count */
- /* reg. B channel 4 */
-
-#define _DDAR5 _DDAR (5) /* DMA Device Address Reg. */
- /* channel 5 */
+ /* channel 4 (read) */
+#define _DBSA4 _DBSA (4) /* DMA Buffer Start address reg. A */
+ /* channel 4 */
+#define _DBTA4 _DBTA (4) /* DMA Buffer Transfer count */
+ /* reg. A channel 4 */
+#define _DBSB4 _DBSB (4) /* DMA Buffer Start address reg. B */
+ /* channel 4 */
+#define _DBTB4 _DBTB (4) /* DMA Buffer Transfer count */
+ /* reg. B channel 4 */
+
+#define _DDAR5 _DDAR (5) /* DMA Device Address Reg. */
+ /* channel 5 */
#define _SetDCSR5 _SetDCSR (5) /* Set DMA Control & Status Reg. */
- /* channel 5 (write) */
+ /* channel 5 (write) */
#define _ClrDCSR5 _ClrDCSR (5) /* Clear DMA Control & Status Reg. */
- /* channel 5 (write) */
+ /* channel 5 (write) */
#define _RdDCSR5 _RdDCSR (5) /* Read DMA Control & Status Reg. */
- /* channel 5 (read) */
-#define _DBSA5 _DBSA (5) /* DMA Buffer Start address reg. A */
- /* channel 5 */
-#define _DBTA5 _DBTA (5) /* DMA Buffer Transfer count */
- /* reg. A channel 5 */
-#define _DBSB5 _DBSB (5) /* DMA Buffer Start address reg. B */
- /* channel 5 */
-#define _DBTB5 _DBTB (5) /* DMA Buffer Transfer count */
- /* reg. B channel 5 */
+ /* channel 5 (read) */
+#define _DBSA5 _DBSA (5) /* DMA Buffer Start address reg. A */
+ /* channel 5 */
+#define _DBTA5 _DBTA (5) /* DMA Buffer Transfer count */
+ /* reg. A channel 5 */
+#define _DBSB5 _DBSB (5) /* DMA Buffer Start address reg. B */
+ /* channel 5 */
+#define _DBTB5 _DBTB (5) /* DMA Buffer Transfer count */
+ /* reg. B channel 5 */
#if LANGUAGE == C
-#define DDAR0 /* DMA Device Address Reg. */ \
- /* channel 0 */ \
+#define DDAR0 /* DMA Device Address Reg. */ \
+ /* channel 0 */ \
(*((volatile Word *) io_p2v (_DDAR0)))
-#define SetDCSR0 /* Set DMA Control & Status Reg. */ \
- /* channel 0 (write) */ \
+#define SetDCSR0 /* Set DMA Control & Status Reg. */ \
+ /* channel 0 (write) */ \
(*((volatile Word *) io_p2v (_SetDCSR0)))
-#define ClrDCSR0 /* Clear DMA Control & Status Reg. */ \
- /* channel 0 (write) */ \
+#define ClrDCSR0 /* Clear DMA Control & Status Reg. */ \
+ /* channel 0 (write) */ \
(*((volatile Word *) io_p2v (_ClrDCSR0)))
-#define RdDCSR0 /* Read DMA Control & Status Reg. */ \
- /* channel 0 (read) */ \
+#define RdDCSR0 /* Read DMA Control & Status Reg. */ \
+ /* channel 0 (read) */ \
(*((volatile Word *) io_p2v (_RdDCSR0)))
-#define DBSA0 /* DMA Buffer Start address reg. A */ \
- /* channel 0 */ \
+#define DBSA0 /* DMA Buffer Start address reg. A */ \
+ /* channel 0 */ \
(*((volatile Address *) io_p2v (_DBSA0)))
-#define DBTA0 /* DMA Buffer Transfer count */ \
- /* reg. A channel 0 */ \
+#define DBTA0 /* DMA Buffer Transfer count */ \
+ /* reg. A channel 0 */ \
(*((volatile Word *) io_p2v (_DBTA0)))
-#define DBSB0 /* DMA Buffer Start address reg. B */ \
- /* channel 0 */ \
+#define DBSB0 /* DMA Buffer Start address reg. B */ \
+ /* channel 0 */ \
(*((volatile Address *) io_p2v (_DBSB0)))
-#define DBTB0 /* DMA Buffer Transfer count */ \
- /* reg. B channel 0 */ \
+#define DBTB0 /* DMA Buffer Transfer count */ \
+ /* reg. B channel 0 */ \
(*((volatile Word *) io_p2v (_DBTB0)))
-#define DDAR1 /* DMA Device Address Reg. */ \
- /* channel 1 */ \
+#define DDAR1 /* DMA Device Address Reg. */ \
+ /* channel 1 */ \
(*((volatile Word *) io_p2v (_DDAR1)))
-#define SetDCSR1 /* Set DMA Control & Status Reg. */ \
- /* channel 1 (write) */ \
+#define SetDCSR1 /* Set DMA Control & Status Reg. */ \
+ /* channel 1 (write) */ \
(*((volatile Word *) io_p2v (_SetDCSR1)))
-#define ClrDCSR1 /* Clear DMA Control & Status Reg. */ \
- /* channel 1 (write) */ \
+#define ClrDCSR1 /* Clear DMA Control & Status Reg. */ \
+ /* channel 1 (write) */ \
(*((volatile Word *) io_p2v (_ClrDCSR1)))
-#define RdDCSR1 /* Read DMA Control & Status Reg. */ \
- /* channel 1 (read) */ \
+#define RdDCSR1 /* Read DMA Control & Status Reg. */ \
+ /* channel 1 (read) */ \
(*((volatile Word *) io_p2v (_RdDCSR1)))
-#define DBSA1 /* DMA Buffer Start address reg. A */ \
- /* channel 1 */ \
+#define DBSA1 /* DMA Buffer Start address reg. A */ \
+ /* channel 1 */ \
(*((volatile Address *) io_p2v (_DBSA1)))
-#define DBTA1 /* DMA Buffer Transfer count */ \
- /* reg. A channel 1 */ \
+#define DBTA1 /* DMA Buffer Transfer count */ \
+ /* reg. A channel 1 */ \
(*((volatile Word *) io_p2v (_DBTA1)))
-#define DBSB1 /* DMA Buffer Start address reg. B */ \
- /* channel 1 */ \
+#define DBSB1 /* DMA Buffer Start address reg. B */ \
+ /* channel 1 */ \
(*((volatile Address *) io_p2v (_DBSB1)))
-#define DBTB1 /* DMA Buffer Transfer count */ \
- /* reg. B channel 1 */ \
+#define DBTB1 /* DMA Buffer Transfer count */ \
+ /* reg. B channel 1 */ \
(*((volatile Word *) io_p2v (_DBTB1)))
-#define DDAR2 /* DMA Device Address Reg. */ \
- /* channel 2 */ \
+#define DDAR2 /* DMA Device Address Reg. */ \
+ /* channel 2 */ \
(*((volatile Word *) io_p2v (_DDAR2)))
-#define SetDCSR2 /* Set DMA Control & Status Reg. */ \
- /* channel 2 (write) */ \
+#define SetDCSR2 /* Set DMA Control & Status Reg. */ \
+ /* channel 2 (write) */ \
(*((volatile Word *) io_p2v (_SetDCSR2)))
-#define ClrDCSR2 /* Clear DMA Control & Status Reg. */ \
- /* channel 2 (write) */ \
+#define ClrDCSR2 /* Clear DMA Control & Status Reg. */ \
+ /* channel 2 (write) */ \
(*((volatile Word *) io_p2v (_ClrDCSR2)))
-#define RdDCSR2 /* Read DMA Control & Status Reg. */ \
- /* channel 2 (read) */ \
+#define RdDCSR2 /* Read DMA Control & Status Reg. */ \
+ /* channel 2 (read) */ \
(*((volatile Word *) io_p2v (_RdDCSR2)))
-#define DBSA2 /* DMA Buffer Start address reg. A */ \
- /* channel 2 */ \
+#define DBSA2 /* DMA Buffer Start address reg. A */ \
+ /* channel 2 */ \
(*((volatile Address *) io_p2v (_DBSA2)))
-#define DBTA2 /* DMA Buffer Transfer count */ \
- /* reg. A channel 2 */ \
+#define DBTA2 /* DMA Buffer Transfer count */ \
+ /* reg. A channel 2 */ \
(*((volatile Word *) io_p2v (_DBTA2)))
-#define DBSB2 /* DMA Buffer Start address reg. B */ \
- /* channel 2 */ \
+#define DBSB2 /* DMA Buffer Start address reg. B */ \
+ /* channel 2 */ \
(*((volatile Address *) io_p2v (_DBSB2)))
-#define DBTB2 /* DMA Buffer Transfer count */ \
- /* reg. B channel 2 */ \
+#define DBTB2 /* DMA Buffer Transfer count */ \
+ /* reg. B channel 2 */ \
(*((volatile Word *) io_p2v (_DBTB2)))
-#define DDAR3 /* DMA Device Address Reg. */ \
- /* channel 3 */ \
+#define DDAR3 /* DMA Device Address Reg. */ \
+ /* channel 3 */ \
(*((volatile Word *) io_p2v (_DDAR3)))
-#define SetDCSR3 /* Set DMA Control & Status Reg. */ \
- /* channel 3 (write) */ \
+#define SetDCSR3 /* Set DMA Control & Status Reg. */ \
+ /* channel 3 (write) */ \
(*((volatile Word *) io_p2v (_SetDCSR3)))
-#define ClrDCSR3 /* Clear DMA Control & Status Reg. */ \
- /* channel 3 (write) */ \
+#define ClrDCSR3 /* Clear DMA Control & Status Reg. */ \
+ /* channel 3 (write) */ \
(*((volatile Word *) io_p2v (_ClrDCSR3)))
-#define RdDCSR3 /* Read DMA Control & Status Reg. */ \
- /* channel 3 (read) */ \
+#define RdDCSR3 /* Read DMA Control & Status Reg. */ \
+ /* channel 3 (read) */ \
(*((volatile Word *) io_p2v (_RdDCSR3)))
-#define DBSA3 /* DMA Buffer Start address reg. A */ \
- /* channel 3 */ \
+#define DBSA3 /* DMA Buffer Start address reg. A */ \
+ /* channel 3 */ \
(*((volatile Address *) io_p2v (_DBSA3)))
-#define DBTA3 /* DMA Buffer Transfer count */ \
- /* reg. A channel 3 */ \
+#define DBTA3 /* DMA Buffer Transfer count */ \
+ /* reg. A channel 3 */ \
(*((volatile Word *) io_p2v (_DBTA3)))
-#define DBSB3 /* DMA Buffer Start address reg. B */ \
- /* channel 3 */ \
+#define DBSB3 /* DMA Buffer Start address reg. B */ \
+ /* channel 3 */ \
(*((volatile Address *) io_p2v (_DBSB3)))
-#define DBTB3 /* DMA Buffer Transfer count */ \
- /* reg. B channel 3 */ \
+#define DBTB3 /* DMA Buffer Transfer count */ \
+ /* reg. B channel 3 */ \
(*((volatile Word *) io_p2v (_DBTB3)))
-#define DDAR4 /* DMA Device Address Reg. */ \
- /* channel 4 */ \
+#define DDAR4 /* DMA Device Address Reg. */ \
+ /* channel 4 */ \
(*((volatile Word *) io_p2v (_DDAR4)))
-#define SetDCSR4 /* Set DMA Control & Status Reg. */ \
- /* channel 4 (write) */ \
+#define SetDCSR4 /* Set DMA Control & Status Reg. */ \
+ /* channel 4 (write) */ \
(*((volatile Word *) io_p2v (_SetDCSR4)))
-#define ClrDCSR4 /* Clear DMA Control & Status Reg. */ \
- /* channel 4 (write) */ \
+#define ClrDCSR4 /* Clear DMA Control & Status Reg. */ \
+ /* channel 4 (write) */ \
(*((volatile Word *) io_p2v (_ClrDCSR4)))
-#define RdDCSR4 /* Read DMA Control & Status Reg. */ \
- /* channel 4 (read) */ \
+#define RdDCSR4 /* Read DMA Control & Status Reg. */ \
+ /* channel 4 (read) */ \
(*((volatile Word *) io_p2v (_RdDCSR4)))
-#define DBSA4 /* DMA Buffer Start address reg. A */ \
- /* channel 4 */ \
+#define DBSA4 /* DMA Buffer Start address reg. A */ \
+ /* channel 4 */ \
(*((volatile Address *) io_p2v (_DBSA4)))
-#define DBTA4 /* DMA Buffer Transfer count */ \
- /* reg. A channel 4 */ \
+#define DBTA4 /* DMA Buffer Transfer count */ \
+ /* reg. A channel 4 */ \
(*((volatile Word *) io_p2v (_DBTA4)))
-#define DBSB4 /* DMA Buffer Start address reg. B */ \
- /* channel 4 */ \
+#define DBSB4 /* DMA Buffer Start address reg. B */ \
+ /* channel 4 */ \
(*((volatile Address *) io_p2v (_DBSB4)))
-#define DBTB4 /* DMA Buffer Transfer count */ \
- /* reg. B channel 4 */ \
+#define DBTB4 /* DMA Buffer Transfer count */ \
+ /* reg. B channel 4 */ \
(*((volatile Word *) io_p2v (_DBTB4)))
-#define DDAR5 /* DMA Device Address Reg. */ \
- /* channel 5 */ \
+#define DDAR5 /* DMA Device Address Reg. */ \
+ /* channel 5 */ \
(*((volatile Word *) io_p2v (_DDAR5)))
-#define SetDCSR5 /* Set DMA Control & Status Reg. */ \
- /* channel 5 (write) */ \
+#define SetDCSR5 /* Set DMA Control & Status Reg. */ \
+ /* channel 5 (write) */ \
(*((volatile Word *) io_p2v (_SetDCSR5)))
-#define ClrDCSR5 /* Clear DMA Control & Status Reg. */ \
- /* channel 5 (write) */ \
+#define ClrDCSR5 /* Clear DMA Control & Status Reg. */ \
+ /* channel 5 (write) */ \
(*((volatile Word *) io_p2v (_ClrDCSR5)))
-#define RdDCSR5 /* Read DMA Control & Status Reg. */ \
- /* channel 5 (read) */ \
+#define RdDCSR5 /* Read DMA Control & Status Reg. */ \
+ /* channel 5 (read) */ \
(*((volatile Word *) io_p2v (_RdDCSR5)))
-#define DBSA5 /* DMA Buffer Start address reg. A */ \
- /* channel 5 */ \
+#define DBSA5 /* DMA Buffer Start address reg. A */ \
+ /* channel 5 */ \
(*((volatile Address *) io_p2v (_DBSA5)))
-#define DBTA5 /* DMA Buffer Transfer count */ \
- /* reg. A channel 5 */ \
+#define DBTA5 /* DMA Buffer Transfer count */ \
+ /* reg. A channel 5 */ \
(*((volatile Word *) io_p2v (_DBTA5)))
-#define DBSB5 /* DMA Buffer Start address reg. B */ \
- /* channel 5 */ \
+#define DBSB5 /* DMA Buffer Start address reg. B */ \
+ /* channel 5 */ \
(*((volatile Address *) io_p2v (_DBSB5)))
-#define DBTB5 /* DMA Buffer Transfer count */ \
- /* reg. B channel 5 */ \
+#define DBTB5 /* DMA Buffer Transfer count */ \
+ /* reg. B channel 5 */ \
(*((volatile Word *) io_p2v (_DBTB5)))
#endif /* LANGUAGE == C */
-#define DDAR_RW 0x00000001 /* device data Read/Write */
-#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */
- /* (memory -> device) */
-#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */
- /* (device -> memory) */
-#define DDAR_E 0x00000002 /* big/little Endian device */
-#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */
-#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */
-#define DDAR_BS 0x00000004 /* device Burst Size */
-#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */
-#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */
-#define DDAR_DW 0x00000008 /* device Data Width */
-#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */
-#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */
-#define DDAR_DS Fld (4, 4) /* Device Select */
-#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \
+#define DDAR_RW 0x00000001 /* device data Read/Write */
+#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */
+ /* (memory -> device) */
+#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */
+ /* (device -> memory) */
+#define DDAR_E 0x00000002 /* big/little Endian device */
+#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */
+#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */
+#define DDAR_BS 0x00000004 /* device Burst Size */
+#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */
+#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */
+#define DDAR_DW 0x00000008 /* device Data Width */
+#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */
+#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */
+#define DDAR_DS Fld (4, 4) /* Device Select */
+#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \
(0x0 << FShft (DDAR_DS))
-#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \
+#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \
(0x1 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \
+#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \
(0x2 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \
+#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \
(0x3 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \
+#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \
(0x4 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \
+#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \
(0x5 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \
+#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \
(0x6 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \
+#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \
(0x7 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \
+#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \
(0x8 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \
+#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \
(0x9 << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \
- /* (audio) */ \
+#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \
+ /* (audio) */ \
(0xA << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \
- /* (audio) */ \
+#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \
+ /* (audio) */ \
(0xB << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \
- /* (telecom) */ \
+#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \
+ /* (telecom) */ \
(0xC << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \
- /* (telecom) */ \
+#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \
+ /* (telecom) */ \
(0xD << FShft (DDAR_DS))
-#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \
+#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \
(0xE << FShft (DDAR_DS))
-#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \
+#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \
(0xF << FShft (DDAR_DS))
-#define DDAR_DA Fld (24, 8) /* Device Address */
-#define DDAR_DevAdd(Add) /* Device Address */ \
+#define DDAR_DA Fld (24, 8) /* Device Address */
+#define DDAR_DevAdd(Add) /* Device Address */ \
(((Add) & 0xF0000000) | \
(((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
-#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \
+#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \
(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
DDAR_Ser0UDCTr + DDAR_DevAdd (_Ser0UDCDR))
-#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \
+#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \
(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
DDAR_Ser0UDCRc + DDAR_DevAdd (_Ser0UDCDR))
-#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \
+#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \
(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
DDAR_Ser1UARTTr + DDAR_DevAdd (_Ser1UTDR))
-#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \
+#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \
(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
DDAR_Ser1UARTRc + DDAR_DevAdd (_Ser1UTDR))
-#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \
+#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \
(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
DDAR_Ser1SDLCTr + DDAR_DevAdd (_Ser1SDDR))
-#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \
+#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \
(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
DDAR_Ser1SDLCRc + DDAR_DevAdd (_Ser1SDDR))
-#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \
+#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \
(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
DDAR_Ser2ICPTr + DDAR_DevAdd (_Ser2UTDR))
-#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \
+#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \
(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
DDAR_Ser2ICPRc + DDAR_DevAdd (_Ser2UTDR))
-#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \
+#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \
(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
DDAR_Ser2ICPTr + DDAR_DevAdd (_Ser2HSDR))
-#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \
+#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \
(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
DDAR_Ser2ICPRc + DDAR_DevAdd (_Ser2HSDR))
-#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \
+#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \
(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
DDAR_Ser3UARTTr + DDAR_DevAdd (_Ser3UTDR))
-#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \
+#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \
(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
DDAR_Ser3UARTRc + DDAR_DevAdd (_Ser3UTDR))
-#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \
+#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \
(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
DDAR_Ser4MCP0Tr + DDAR_DevAdd (_Ser4MCDR0))
-#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \
+#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \
(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
DDAR_Ser4MCP0Rc + DDAR_DevAdd (_Ser4MCDR0))
-#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \
- /* (telecom) */ \
+#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \
+ /* (telecom) */ \
(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
DDAR_Ser4MCP1Tr + DDAR_DevAdd (_Ser4MCDR1))
-#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \
- /* (telecom) */ \
+#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \
+ /* (telecom) */ \
(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
DDAR_Ser4MCP1Rc + DDAR_DevAdd (_Ser4MCDR1))
-#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \
+#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \
(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
DDAR_Ser4SSPTr + DDAR_DevAdd (_Ser4SSDR))
-#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \
+#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \
(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
DDAR_Ser4SSPRc + DDAR_DevAdd (_Ser4SSDR))
-#define DCSR_RUN 0x00000001 /* DMA RUNing */
-#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */
-#define DCSR_ERROR 0x00000004 /* DMA ERROR */
-#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */
+#define DCSR_RUN 0x00000001 /* DMA RUNing */
+#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */
+#define DCSR_ERROR 0x00000004 /* DMA ERROR */
+#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */
#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */
-#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */
+#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */
#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */
-#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */
-#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */
-#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */
+#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */
+#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */
+#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */
-#define DBT_TC Fld (13, 0) /* Transfer Count */
-#define DBTA_TCA DBT_TC /* Transfer Count buffer A */
-#define DBTB_TCB DBT_TC /* Transfer Count buffer B */
+#define DBT_TC Fld (13, 0) /* Transfer Count */
+#define DBTA_TCA DBT_TC /* Transfer Count buffer A */
+#define DBTB_TCB DBT_TC /* Transfer Count buffer B */
/*
* Liquid Crystal Display (LCD) control registers
*
* Registers
- * LCCR0 Liquid Crystal Display (LCD) Control Register 0
- * (read/write).
- * [Bits LDM, BAM, and ERM are only implemented in
- * versions 2.0 (rev. = 8) and higher of the StrongARM
- * SA-1100.]
- * LCSR Liquid Crystal Display (LCD) Status Register
- * (read/write).
- * [Bit LDD can be only read in versions 1.0 (rev. = 1)
- * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
- * read and written (cleared) in versions 2.0 (rev. = 8)
- * and higher.]
- * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access
- * (DMA) Base Address Register channel 1 (read/write).
- * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access
- * (DMA) Current Address Register channel 1 (read).
- * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access
- * (DMA) Base Address Register channel 2 (read/write).
- * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access
- * (DMA) Current Address Register channel 2 (read).
- * LCCR1 Liquid Crystal Display (LCD) Control Register 1
- * (read/write).
- * [The LCCR1 register can be only written in
- * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- * StrongARM SA-1100, it can be written and read in
- * versions 2.0 (rev. = 8) and higher.]
- * LCCR2 Liquid Crystal Display (LCD) Control Register 2
- * (read/write).
- * [The LCCR1 register can be only written in
- * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- * StrongARM SA-1100, it can be written and read in
- * versions 2.0 (rev. = 8) and higher.]
- * LCCR3 Liquid Crystal Display (LCD) Control Register 3
- * (read/write).
- * [The LCCR1 register can be only written in
- * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- * StrongARM SA-1100, it can be written and read in
- * versions 2.0 (rev. = 8) and higher. Bit PCP is only
- * implemented in versions 2.0 (rev. = 8) and higher of
- * the StrongARM SA-1100.]
+ * LCCR0 Liquid Crystal Display (LCD) Control Register 0
+ * (read/write).
+ * [Bits LDM, BAM, and ERM are only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
+ * LCSR Liquid Crystal Display (LCD) Status Register
+ * (read/write).
+ * [Bit LDD can be only read in versions 1.0 (rev. = 1)
+ * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
+ * read and written (cleared) in versions 2.0 (rev. = 8)
+ * and higher.]
+ * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Base Address Register channel 1 (read/write).
+ * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Current Address Register channel 1 (read).
+ * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Base Address Register channel 2 (read/write).
+ * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Current Address Register channel 2 (read).
+ * LCCR1 Liquid Crystal Display (LCD) Control Register 1
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher.]
+ * LCCR2 Liquid Crystal Display (LCD) Control Register 2
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher.]
+ * LCCR3 Liquid Crystal Display (LCD) Control Register 3
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher. Bit PCP is only
+ * implemented in versions 2.0 (rev. = 8) and higher of
+ * the StrongARM SA-1100.]
*
* Clocks
* fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
* fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
* fpix, Tpix Frequency, period of the pixel clock.
- * fln, Tln Frequency, period of the line clock.
- * fac, Tac Frequency, period of the AC bias clock.
+ * fln, Tln Frequency, period of the line clock.
+ * fac, Tac Frequency, period of the AC bias clock.
*/
-#define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */
-#define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \
- /* [byte] */ \
+#define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */
+#define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \
+ /* [byte] */ \
(16*LCD_PEntrySp)
-#define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \
- /* [byte] */ \
+#define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \
+ /* [byte] */ \
(256*LCD_PEntrySp)
-#define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \
- /* dummy-Palette Space [byte] */ \
+#define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \
+ /* dummy-Palette Space [byte] */ \
(16*LCD_PEntrySp)
#define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */
#define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */
#define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */
-#define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */
-#define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */
-#define LCD_4Bit /* LCD 4-Bit pixel mode */ \
+#define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */
+#define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */
+#define LCD_4Bit /* LCD 4-Bit pixel mode */ \
(0 << FShft (LCD_PBS))
-#define LCD_8Bit /* LCD 8-Bit pixel mode */ \
+#define LCD_8Bit /* LCD 8-Bit pixel mode */ \
(1 << FShft (LCD_PBS))
-#define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \
+#define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \
(2 << FShft (LCD_PBS))
-#define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */
-#define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */
-#define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */
-#define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */
-#define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */
-#define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */
-#define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */
-#define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */
-#define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */
-#define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */
-#define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */
-#define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */
-#define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */
-#define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */
-#define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */
-#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */
- /* (Alternative) */
-
-#define _LCCR0 0xB0100000 /* LCD Control Reg. 0 */
-#define _LCSR 0xB0100004 /* LCD Status Reg. */
-#define _DBAR1 0xB0100010 /* LCD DMA Base Address Reg. */
- /* channel 1 */
-#define _DCAR1 0xB0100014 /* LCD DMA Current Address Reg. */
- /* channel 1 */
-#define _DBAR2 0xB0100018 /* LCD DMA Base Address Reg. */
- /* channel 2 */
-#define _DCAR2 0xB010001C /* LCD DMA Current Address Reg. */
- /* channel 2 */
-#define _LCCR1 0xB0100020 /* LCD Control Reg. 1 */
-#define _LCCR2 0xB0100024 /* LCD Control Reg. 2 */
-#define _LCCR3 0xB0100028 /* LCD Control Reg. 3 */
+#define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */
+#define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */
+#define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */
+#define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */
+#define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */
+#define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */
+#define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */
+#define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */
+#define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */
+#define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */
+#define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */
+#define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */
+#define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */
+#define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */
+#define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */
+#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */
+ /* (Alternative) */
+
+#define _LCCR0 0xB0100000 /* LCD Control Reg. 0 */
+#define _LCSR 0xB0100004 /* LCD Status Reg. */
+#define _DBAR1 0xB0100010 /* LCD DMA Base Address Reg. */
+ /* channel 1 */
+#define _DCAR1 0xB0100014 /* LCD DMA Current Address Reg. */
+ /* channel 1 */
+#define _DBAR2 0xB0100018 /* LCD DMA Base Address Reg. */
+ /* channel 2 */
+#define _DCAR2 0xB010001C /* LCD DMA Current Address Reg. */
+ /* channel 2 */
+#define _LCCR1 0xB0100020 /* LCD Control Reg. 1 */
+#define _LCCR2 0xB0100024 /* LCD Control Reg. 2 */
+#define _LCCR3 0xB0100028 /* LCD Control Reg. 3 */
#if LANGUAGE == C
-#define LCCR0 /* LCD Control Reg. 0 */ \
+#define LCCR0 /* LCD Control Reg. 0 */ \
(*((volatile Word *) io_p2v (_LCCR0)))
-#define LCSR /* LCD Status Reg. */ \
+#define LCSR /* LCD Status Reg. */ \
(*((volatile Word *) io_p2v (_LCSR)))
-#define DBAR1 /* LCD DMA Base Address Reg. */ \
- /* channel 1 */ \
+#define DBAR1 /* LCD DMA Base Address Reg. */ \
+ /* channel 1 */ \
(*((volatile Address *) io_p2v (_DBAR1)))
-#define DCAR1 /* LCD DMA Current Address Reg. */ \
- /* channel 1 */ \
+#define DCAR1 /* LCD DMA Current Address Reg. */ \
+ /* channel 1 */ \
(*((volatile Address *) io_p2v (_DCAR1)))
-#define DBAR2 /* LCD DMA Base Address Reg. */ \
- /* channel 2 */ \
+#define DBAR2 /* LCD DMA Base Address Reg. */ \
+ /* channel 2 */ \
(*((volatile Address *) io_p2v (_DBAR2)))
-#define DCAR2 /* LCD DMA Current Address Reg. */ \
- /* channel 2 */ \
+#define DCAR2 /* LCD DMA Current Address Reg. */ \
+ /* channel 2 */ \
(*((volatile Address *) io_p2v (_DCAR2)))
-#define LCCR1 /* LCD Control Reg. 1 */ \
+#define LCCR1 /* LCD Control Reg. 1 */ \
(*((volatile Word *) io_p2v (_LCCR1)))
-#define LCCR2 /* LCD Control Reg. 2 */ \
+#define LCCR2 /* LCD Control Reg. 2 */ \
(*((volatile Word *) io_p2v (_LCCR2)))
-#define LCCR3 /* LCD Control Reg. 3 */ \
+#define LCCR3 /* LCD Control Reg. 3 */ \
(*((volatile Word *) io_p2v (_LCCR3)))
#endif /* LANGUAGE == C */
-#define LCCR0_LEN 0x00000001 /* LCD ENable */
+#define LCCR0_LEN 0x00000001 /* LCD ENable */
#define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */
-#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
-#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
-#define LCCR0_SDS 0x00000004 /* Single/Dual panel display */
- /* Select */
-#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
-#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
-#define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */
- /* interrupt Mask (disable) */
-#define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */
- /* interrupt Mask (disable) */
+#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
+#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
+#define LCCR0_SDS 0x00000004 /* Single/Dual panel display */
+ /* Select */
+#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
+#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
+#define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */
+ /* interrupt Mask (disable) */
+#define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */
+ /* interrupt Mask (disable) */
#define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */
/* IUU, OOL, OUL, OOU, and OUU) */
- /* interrupt Mask (disable) */
+ /* interrupt Mask (disable) */
#define LCCR0_PAS 0x00000080 /* Passive/Active display Select */
-#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
-#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
-#define LCCR0_BLE 0x00000100 /* Big/Little Endian select */
-#define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */
-#define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */
+#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
+#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
+#define LCCR0_BLE 0x00000100 /* Big/Little Endian select */
+#define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */
+#define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */
#define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */
- /* display mode) */
-#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
- /* display */
-#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
- /* display */
-#define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */
- /* [Tmem] */
-#define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \
- /* [0..510 Tcpu] */ \
+ /* display mode) */
+#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
+ /* display */
+#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
+ /* display */
+#define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */
+ /* [Tmem] */
+#define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \
+ /* [0..510 Tcpu] */ \
((Tcpu)/2 << FShft (LCCR0_PDD))
-#define LCSR_LDD 0x00000001 /* LCD Disable Done */
-#define LCSR_BAU 0x00000002 /* Base Address Update (read) */
-#define LCSR_BER 0x00000004 /* Bus ERror */
-#define LCSR_ABC 0x00000008 /* AC Bias clock Count */
-#define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */
- /* panel */
-#define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */
- /* panel */
-#define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */
- /* panel */
-#define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */
- /* panel */
-#define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */
- /* panel */
-#define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */
- /* panel */
-#define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */
- /* panel */
-#define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */
- /* panel */
-
-#define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */
-#define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \
+#define LCSR_LDD 0x00000001 /* LCD Disable Done */
+#define LCSR_BAU 0x00000002 /* Base Address Update (read) */
+#define LCSR_BER 0x00000004 /* Bus ERror */
+#define LCSR_ABC 0x00000008 /* AC Bias clock Count */
+#define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */
+ /* panel */
+#define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */
+ /* panel */
+#define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */
+ /* panel */
+#define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */
+ /* panel */
+#define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */
+ /* panel */
+#define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */
+ /* panel */
+#define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */
+ /* panel */
+#define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */
+ /* panel */
+
+#define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */
+#define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \
(((Pixel) - 16)/16 << FShft (LCCR1_PPL))
-#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
+#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
/* pulse Width - 2 [Tpix] (L_LCLK) */
-#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
- /* pulse Width [2..65 Tpix] */ \
+#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
+ /* pulse Width [2..65 Tpix] */ \
(((Tpix) - 2) << FShft (LCCR1_HSW))
#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
- /* count - 1 [Tpix] */
-#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
- /* [1..256 Tpix] */ \
+ /* count - 1 [Tpix] */
+#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
+ /* [1..256 Tpix] */ \
(((Tpix) - 1) << FShft (LCCR1_ELW))
#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
- /* Wait count - 1 [Tpix] */
-#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
- /* [1..256 Tpix] */ \
+ /* Wait count - 1 [Tpix] */
+#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
+ /* [1..256 Tpix] */ \
(((Tpix) - 1) << FShft (LCCR1_BLW))
-#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
+#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
(((Line) - 1) << FShft (LCCR2_LPP))
#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
- /* Width - 1 [Tln] (L_FCLK) */
-#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
- /* Width [1..64 Tln] */ \
+ /* Width - 1 [Tln] (L_FCLK) */
+#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
+ /* Width [1..64 Tln] */ \
(((Tln) - 1) << FShft (LCCR2_VSW))
#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
- /* count [Tln] */
-#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
- /* [0..255 Tln] */ \
+ /* count [Tln] */
+#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
+ /* [0..255 Tln] */ \
((Tln) << FShft (LCCR2_EFW))
#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
- /* Wait count [Tln] */
-#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
- /* [0..255 Tln] */ \
+ /* Wait count [Tln] */
+#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
+ /* [0..255 Tln] */ \
((Tln) << FShft (LCCR2_BFW))
-#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */
- /* [1..255] (L_PCLK) */
- /* fpix = fcpu/(2*(PCD + 2)) */
- /* Tpix = 2*(PCD + 2)*Tcpu */
-#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \
+#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */
+ /* [1..255] (L_PCLK) */
+ /* fpix = fcpu/(2*(PCD + 2)) */
+ /* Tpix = 2*(PCD + 2)*Tcpu */
+#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \
(((Div) - 4)/2 << FShft (LCCR3_PCD))
/* fpix = fcpu/(2*Floor (Div/2)) */
/* Tpix = 2*Floor (Div/2)*Tcpu */
#define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \
(((Div) - 3)/2 << FShft (LCCR3_PCD))
/* fpix = fcpu/(2*Ceil (Div/2)) */
- /* Tpix = 2*Ceil (Div/2)*Tcpu */
+ /* Tpix = 2*Ceil (Div/2)*Tcpu */
#define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */
- /* [Tln] (L_BIAS) */
-#define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \
+ /* [Tln] (L_BIAS) */
+#define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \
(((Div) - 2)/2 << FShft (LCCR3_ACB))
/* fac = fln/(2*Floor (Div/2)) */
- /* Tac = 2*Floor (Div/2)*Tln */
-#define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \
+ /* Tac = 2*Floor (Div/2)*Tln */
+#define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \
(((Div) - 1)/2 << FShft (LCCR3_ACB))
- /* fac = fln/(2*Ceil (Div/2)) */
- /* Tac = 2*Ceil (Div/2)*Tln */
-#define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */
- /* Interrupt */
-#define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \
- /* Off */ \
+ /* fac = fln/(2*Ceil (Div/2)) */
+ /* Tac = 2*Ceil (Div/2)*Tln */
+#define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */
+ /* Interrupt */
+#define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \
+ /* Off */ \
(0 << FShft (LCCR3_API))
-#define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \
- /* [1..15] */ \
+#define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \
+ /* [1..15] */ \
((Trans) << FShft (LCCR3_API))
#define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */
- /* Polarity (L_FCLK) */
+ /* Polarity (L_FCLK) */
#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
- /* active High */
+ /* active High */
#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
- /* active Low */
-#define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */
- /* pulse Polarity (L_LCLK) */
-#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
- /* pulse active High */
-#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
- /* pulse active Low */
+ /* active Low */
+#define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */
+ /* pulse Polarity (L_LCLK) */
+#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
+ /* pulse active High */
+#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
+ /* pulse active Low */
#define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
+#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
#define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */
- /* active display mode) */
-#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
-#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
+ /* active display mode) */
+#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
+#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
#undef C
diff --git a/include/ahci.h b/include/ahci.h
index 80701e2..b363ee1 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -91,12 +91,12 @@
#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
-#define PORT_IRQ_FATAL PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_ERR \
+#define PORT_IRQ_FATAL PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_ERR \
| PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_ERR
-#define DEF_PORT_IRQ PORT_IRQ_FATAL | PORT_IRQ_PHYRDY \
- | PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE \
- | PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS \
+#define DEF_PORT_IRQ PORT_IRQ_FATAL | PORT_IRQ_PHYRDY \
+ | PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE \
+ | PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS \
| PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS \
| PORT_IRQ_D2H_REG_FIS
@@ -172,7 +172,7 @@ struct ahci_ioports {
};
struct ahci_probe_ent {
- pci_dev_t dev;
+ pci_dev_t dev;
struct ahci_ioports port[AHCI_MAX_PORTS];
u32 n_ports;
u32 hard_port_no;
diff --git a/include/armcoremodule.h b/include/armcoremodule.h
index 7dac6f8..f1ded85 100644
--- a/include/armcoremodule.h
+++ b/include/armcoremodule.h
@@ -28,20 +28,20 @@
#ifndef __ARMCOREMODULE_H
#define __ARMCOREMODULE_H
-#define CM_BASE 0x10000000
+#define CM_BASE 0x10000000
/* CM registers common to all CMs */
/* Note that observed values after reboot into the ARM Boot Monitor
have been used as defaults, rather than the POR values */
-#define OS_CTRL 0x0000000C
+#define OS_CTRL 0x0000000C
#define CMMASK_REMAP 0x00000005 /* set remap & led */
#define CMMASK_RESET 0x00000008
-#define OS_LOCK 0x00000014
-#define CMVAL_LOCK1 0x0000A000 /* locking value */
+#define OS_LOCK 0x00000014
+#define CMVAL_LOCK1 0x0000A000 /* locking value */
#define CMVAL_LOCK2 0x0000005F /* locking value */
#define CMVAL_UNLOCK 0x00000000 /* any value != CM_LOCKVAL */
#define OS_SDRAM 0x00000020
-#define OS_INIT 0x00000024
+#define OS_INIT 0x00000024
#define CMMASK_MAP_SIMPLE 0xFFFDFFFF /* simple mapping */
#define CMMASK_TCRAM_DISABLE 0xFFFEFFFF /* TCRAM disabled */
#define CMMASK_LOWVEC 0x00000000 /* vectors @ 0x00000000 */
diff --git a/include/asm-arm/arch-arm720t/netarm_mem_module.h b/include/asm-arm/arch-arm720t/netarm_mem_module.h
index f0529fd..c650c3b 100644
--- a/include/asm-arm/arch-arm720t/netarm_mem_module.h
+++ b/include/asm-arm/arch-arm720t/netarm_mem_module.h
@@ -170,15 +170,15 @@
/* Option B Registers (0xFFC0_00x8) */
#define NETARM_MEM_OPTB_SYNC_1_STAGE (0x00000001)
#define NETARM_MEM_OPTB_SYNC_2_STAGE (0x00000002)
-#define NETARM_MEM_OPTB_BCYC_PLUS0 (0x00000000)
-#define NETARM_MEM_OPTB_BCYC_PLUS4 (0x00000004)
-#define NETARM_MEM_OPTB_BCYC_PLUS8 (0x00000008)
-#define NETARM_MEM_OPTB_BCYC_PLUS12 (0x0000000C)
-
-#define NETARM_MEM_OPTB_WAIT_PLUS0 (0x00000000)
-#define NETARM_MEM_OPTB_WAIT_PLUS16 (0x00000010)
-#define NETARM_MEM_OPTB_WAIT_PLUS32 (0x00000020)
-#define NETARM_MEM_OPTB_WAIT_PLUS48 (0x00000030)
+#define NETARM_MEM_OPTB_BCYC_PLUS0 (0x00000000)
+#define NETARM_MEM_OPTB_BCYC_PLUS4 (0x00000004)
+#define NETARM_MEM_OPTB_BCYC_PLUS8 (0x00000008)
+#define NETARM_MEM_OPTB_BCYC_PLUS12 (0x0000000C)
+
+#define NETARM_MEM_OPTB_WAIT_PLUS0 (0x00000000)
+#define NETARM_MEM_OPTB_WAIT_PLUS16 (0x00000010)
+#define NETARM_MEM_OPTB_WAIT_PLUS32 (0x00000020)
+#define NETARM_MEM_OPTB_WAIT_PLUS48 (0x00000030)
#endif
#endif
diff --git a/include/asm-arm/arch-arm720t/netarm_ser_module.h b/include/asm-arm/arch-arm720t/netarm_ser_module.h
index fceabd1..6fbae11 100644
--- a/include/asm-arm/arch-arm720t/netarm_ser_module.h
+++ b/include/asm-arm/arch-arm720t/netarm_ser_module.h
@@ -284,21 +284,21 @@ typedef struct {
/* from section 7.5.4 of HW Ref Guide */
/* #ifdef CONFIG_NETARM_PLL_BYPASS */
-#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
- NETARM_SER_BR_RX_CLK_INT | \
- NETARM_SER_BR_TX_CLK_INT | \
- NETARM_SER_BR_CLK_EXT_5 | \
- ( ( ( ( NETARM_XTAL_FREQ / \
- ( x * 10 ) ) - 1 ) / 16 ) & \
+#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
+ NETARM_SER_BR_RX_CLK_INT | \
+ NETARM_SER_BR_TX_CLK_INT | \
+ NETARM_SER_BR_CLK_EXT_5 | \
+ ( ( ( ( NETARM_XTAL_FREQ / \
+ ( x * 10 ) ) - 1 ) / 16 ) & \
NETARM_SER_BR_MASK ) )
/*
#else
-#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
- NETARM_SER_BR_RX_CLK_INT | \
- NETARM_SER_BR_TX_CLK_INT | \
- NETARM_SER_BR_CLK_SYSTEM | \
- ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / \
- ( x * 2 ) ) - 1 ) / 16 ) & \
+#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
+ NETARM_SER_BR_RX_CLK_INT | \
+ NETARM_SER_BR_TX_CLK_INT | \
+ NETARM_SER_BR_CLK_SYSTEM | \
+ ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / \
+ ( x * 2 ) ) - 1 ) / 16 ) & \
NETARM_SER_BR_MASK ) )
#endif
*/
@@ -313,13 +313,13 @@ typedef struct {
/* #ifdef CONFIG_NETARM_PLL_BYPASS */
#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
( ( ( ( 10 * NETARM_XTAL_FREQ ) / \
- ( x * 5 * 512 ) ) - 1 ) & \
+ ( x * 5 * 512 ) ) - 1 ) & \
NETARM_SER_RX_GAP_MASK ) )
/*
#else
#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \
- ( x * 512 ) ) - 1 ) & \
+ ( x * 512 ) ) - 1 ) & \
NETARM_SER_RX_GAP_MASK ) )
#endif
*/
@@ -327,11 +327,11 @@ typedef struct {
#if 0
#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \
- ( x * 5 * 512 ) ) - 1 ) & \
+ ( x * 5 * 512 ) ) - 1 ) & \
NETARM_SER_RX_GAP_MASK ) )
#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
( ( ( ( 10 * NETARM_XTAL_FREQ ) / \
- ( x * 512 ) ) - 1 ) & \
+ ( x * 512 ) ) - 1 ) & \
NETARM_SER_RX_GAP_MASK ) )
#endif
diff --git a/include/asm-arm/arch-arm720t/s3c4510b.h b/include/asm-arm/arch-arm720t/s3c4510b.h
index 73a3b6d..6b8c8ed 100644
--- a/include/asm-arm/arch-arm720t/s3c4510b.h
+++ b/include/asm-arm/arch-arm720t/s3c4510b.h
@@ -35,7 +35,7 @@
/* Special Register Start Address After System Reset */
#define REG_BASE (0x03ff0000)
-#define SPSTR (REG_BASE)
+#define SPSTR (REG_BASE)
/* *********************** */
/* System Manager Register */
@@ -100,7 +100,7 @@
#define REG_I2C_CON (REG_BASE+0xf000)
#define REG_I2C_BUF (REG_BASE+0xf004)
#define REG_I2C_PS (REG_BASE+0xf008)
-#define REG_I2C_COUNT (REG_BASE+0xf00c)
+#define REG_I2C_COUNT (REG_BASE+0xf00c)
/********************/
/* GDMA 0 */
@@ -149,7 +149,7 @@
/********************/
/* Timer Register */
/********************/
-#define REG_TMOD (REG_BASE+0x6000)
+#define REG_TMOD (REG_BASE+0x6000)
#define REG_TDATA0 (REG_BASE+0x6004)
#define REG_TDATA1 (REG_BASE+0x6008)
#define REG_TCNT0 (REG_BASE+0x600c)
@@ -159,8 +159,8 @@
/* I/O Port Interface */
/**********************/
#define REG_IOPMODE (REG_BASE+0x5000)
-#define REG_IOPCON (REG_BASE+0x5004)
-#define REG_IOPDATA (REG_BASE+0x5008)
+#define REG_IOPCON (REG_BASE+0x5004)
+#define REG_IOPDATA (REG_BASE+0x5008)
/*********************************/
/* Interrupt Controller Register */
diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
index 0e01005..2f7f710 100644
--- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h
+++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
@@ -32,17 +32,17 @@ typedef volatile unsigned int AT91_REG; /* Hardware register definition */
/*****************************************************************************/
typedef struct _AT91S_TC
{
- AT91_REG TC_CCR; /* Channel Control Register */
- AT91_REG TC_CMR; /* Channel Mode Register */
- AT91_REG Reserved0[2]; /* */
- AT91_REG TC_CV; /* Counter Value */
- AT91_REG TC_RA; /* Register A */
- AT91_REG TC_RB; /* Register B */
- AT91_REG TC_RC; /* Register C */
- AT91_REG TC_SR; /* Status Register */
- AT91_REG TC_IER; /* Interrupt Enable Register */
- AT91_REG TC_IDR; /* Interrupt Disable Register */
- AT91_REG TC_IMR; /* Interrupt Mask Register */
+ AT91_REG TC_CCR; /* Channel Control Register */
+ AT91_REG TC_CMR; /* Channel Mode Register */
+ AT91_REG Reserved0[2]; /* */
+ AT91_REG TC_CV; /* Counter Value */
+ AT91_REG TC_RA; /* Register A */
+ AT91_REG TC_RB; /* Register B */
+ AT91_REG TC_RC; /* Register C */
+ AT91_REG TC_SR; /* Status Register */
+ AT91_REG TC_IER; /* Interrupt Enable Register */
+ AT91_REG TC_IDR; /* Interrupt Disable Register */
+ AT91_REG TC_IMR; /* Interrupt Mask Register */
} AT91S_TC, *AT91PS_TC;
#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */
@@ -65,33 +65,33 @@ typedef struct _AT91S_TC
/*****************************************************************************/
typedef struct _AT91S_USART
{
- AT91_REG US_CR; /* Control Register */
- AT91_REG US_MR; /* Mode Register */
- AT91_REG US_IER; /* Interrupt Enable Register */
- AT91_REG US_IDR; /* Interrupt Disable Register */
- AT91_REG US_IMR; /* Interrupt Mask Register */
- AT91_REG US_CSR; /* Channel Status Register */
- AT91_REG US_RHR; /* Receiver Holding Register */
- AT91_REG US_THR; /* Transmitter Holding Register */
- AT91_REG US_BRGR; /* Baud Rate Generator Register */
- AT91_REG US_RTOR; /* Receiver Time-out Register */
- AT91_REG US_TTGR; /* Transmitter Time-guard Register */
- AT91_REG Reserved0[5]; /* */
- AT91_REG US_FIDI; /* FI_DI_Ratio Register */
- AT91_REG US_NER; /* Nb Errors Register */
- AT91_REG US_XXR; /* XON_XOFF Register */
- AT91_REG US_IF; /* IRDA_FILTER Register */
+ AT91_REG US_CR; /* Control Register */
+ AT91_REG US_MR; /* Mode Register */
+ AT91_REG US_IER; /* Interrupt Enable Register */
+ AT91_REG US_IDR; /* Interrupt Disable Register */
+ AT91_REG US_IMR; /* Interrupt Mask Register */
+ AT91_REG US_CSR; /* Channel Status Register */
+ AT91_REG US_RHR; /* Receiver Holding Register */
+ AT91_REG US_THR; /* Transmitter Holding Register */
+ AT91_REG US_BRGR; /* Baud Rate Generator Register */
+ AT91_REG US_RTOR; /* Receiver Time-out Register */
+ AT91_REG US_TTGR; /* Transmitter Time-guard Register */
+ AT91_REG Reserved0[5]; /* */
+ AT91_REG US_FIDI; /* FI_DI_Ratio Register */
+ AT91_REG US_NER; /* Nb Errors Register */
+ AT91_REG US_XXR; /* XON_XOFF Register */
+ AT91_REG US_IF; /* IRDA_FILTER Register */
AT91_REG Reserved1[44]; /* */
- AT91_REG US_RPR; /* Receive Pointer Register */
- AT91_REG US_RCR; /* Receive Counter Register */
- AT91_REG US_TPR; /* Transmit Pointer Register */
- AT91_REG US_TCR; /* Transmit Counter Register */
- AT91_REG US_RNPR; /* Receive Next Pointer Register */
- AT91_REG US_RNCR; /* Receive Next Counter Register */
- AT91_REG US_TNPR; /* Transmit Next Pointer Register */
- AT91_REG US_TNCR; /* Transmit Next Counter Register */
- AT91_REG US_PTCR; /* PDC Transfer Control Register */
- AT91_REG US_PTSR; /* PDC Transfer Status Register */
+ AT91_REG US_RPR; /* Receive Pointer Register */
+ AT91_REG US_RCR; /* Receive Counter Register */
+ AT91_REG US_TPR; /* Transmit Pointer Register */
+ AT91_REG US_TCR; /* Transmit Counter Register */
+ AT91_REG US_RNPR; /* Receive Next Pointer Register */
+ AT91_REG US_RNCR; /* Receive Next Counter Register */
+ AT91_REG US_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG US_TNCR; /* Transmit Next Counter Register */
+ AT91_REG US_PTCR; /* PDC Transfer Control Register */
+ AT91_REG US_PTSR; /* PDC Transfer Status Register */
} AT91S_USART, *AT91PS_USART;
/*****************************************************************************/
@@ -99,10 +99,10 @@ typedef struct _AT91S_USART
/*****************************************************************************/
typedef struct _AT91S_CKGR
{
- AT91_REG CKGR_MOR; /* Main Oscillator Register */
- AT91_REG CKGR_MCFR; /* Main Clock Frequency Register */
- AT91_REG CKGR_PLLAR; /* PLL A Register */
- AT91_REG CKGR_PLLBR; /* PLL B Register */
+ AT91_REG CKGR_MOR; /* Main Oscillator Register */
+ AT91_REG CKGR_MCFR; /* Main Clock Frequency Register */
+ AT91_REG CKGR_PLLAR; /* PLL A Register */
+ AT91_REG CKGR_PLLBR; /* PLL B Register */
} AT91S_CKGR, *AT91PS_CKGR;
/* -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- */
@@ -146,41 +146,41 @@ typedef struct _AT91S_CKGR
/*****************************************************************************/
typedef struct _AT91S_PIO
{
- AT91_REG PIO_PER; /* PIO Enable Register */
- AT91_REG PIO_PDR; /* PIO Disable Register */
- AT91_REG PIO_PSR; /* PIO Status Register */
- AT91_REG Reserved0[1]; /* */
- AT91_REG PIO_OER; /* Output Enable Register */
- AT91_REG PIO_ODR; /* Output Disable Registerr */
- AT91_REG PIO_OSR; /* Output Status Register */
- AT91_REG Reserved1[1]; /* */
- AT91_REG PIO_IFER; /* Input Filter Enable Register */
- AT91_REG PIO_IFDR; /* Input Filter Disable Register */
- AT91_REG PIO_IFSR; /* Input Filter Status Register */
- AT91_REG Reserved2[1]; /* */
- AT91_REG PIO_SODR; /* Set Output Data Register */
- AT91_REG PIO_CODR; /* Clear Output Data Register */
- AT91_REG PIO_ODSR; /* Output Data Status Register */
- AT91_REG PIO_PDSR; /* Pin Data Status Register */
- AT91_REG PIO_IER; /* Interrupt Enable Register */
- AT91_REG PIO_IDR; /* Interrupt Disable Register */
- AT91_REG PIO_IMR; /* Interrupt Mask Register */
- AT91_REG PIO_ISR; /* Interrupt Status Register */
- AT91_REG PIO_MDER; /* Multi-driver Enable Register */
- AT91_REG PIO_MDDR; /* Multi-driver Disable Register */
- AT91_REG PIO_MDSR; /* Multi-driver Status Register */
- AT91_REG Reserved3[1]; /* */
- AT91_REG PIO_PPUDR; /* Pull-up Disable Register */
- AT91_REG PIO_PPUER; /* Pull-up Enable Register */
- AT91_REG PIO_PPUSR; /* Pad Pull-up Status Register */
- AT91_REG Reserved4[1]; /* */
- AT91_REG PIO_ASR; /* Select A Register */
- AT91_REG PIO_BSR; /* Select B Register */
- AT91_REG PIO_ABSR; /* AB Select Status Register */
- AT91_REG Reserved5[9]; /* */
- AT91_REG PIO_OWER; /* Output Write Enable Register */
- AT91_REG PIO_OWDR; /* Output Write Disable Register */
- AT91_REG PIO_OWSR; /* Output Write Status Register */
+ AT91_REG PIO_PER; /* PIO Enable Register */
+ AT91_REG PIO_PDR; /* PIO Disable Register */
+ AT91_REG PIO_PSR; /* PIO Status Register */
+ AT91_REG Reserved0[1]; /* */
+ AT91_REG PIO_OER; /* Output Enable Register */
+ AT91_REG PIO_ODR; /* Output Disable Registerr */
+ AT91_REG PIO_OSR; /* Output Status Register */
+ AT91_REG Reserved1[1]; /* */
+ AT91_REG PIO_IFER; /* Input Filter Enable Register */
+ AT91_REG PIO_IFDR; /* Input Filter Disable Register */
+ AT91_REG PIO_IFSR; /* Input Filter Status Register */
+ AT91_REG Reserved2[1]; /* */
+ AT91_REG PIO_SODR; /* Set Output Data Register */
+ AT91_REG PIO_CODR; /* Clear Output Data Register */
+ AT91_REG PIO_ODSR; /* Output Data Status Register */
+ AT91_REG PIO_PDSR; /* Pin Data Status Register */
+ AT91_REG PIO_IER; /* Interrupt Enable Register */
+ AT91_REG PIO_IDR; /* Interrupt Disable Register */
+ AT91_REG PIO_IMR; /* Interrupt Mask Register */
+ AT91_REG PIO_ISR; /* Interrupt Status Register */
+ AT91_REG PIO_MDER; /* Multi-driver Enable Register */
+ AT91_REG PIO_MDDR; /* Multi-driver Disable Register */
+ AT91_REG PIO_MDSR; /* Multi-driver Status Register */
+ AT91_REG Reserved3[1]; /* */
+ AT91_REG PIO_PPUDR; /* Pull-up Disable Register */
+ AT91_REG PIO_PPUER; /* Pull-up Enable Register */
+ AT91_REG PIO_PPUSR; /* Pad Pull-up Status Register */
+ AT91_REG Reserved4[1]; /* */
+ AT91_REG PIO_ASR; /* Select A Register */
+ AT91_REG PIO_BSR; /* Select B Register */
+ AT91_REG PIO_ABSR; /* AB Select Status Register */
+ AT91_REG Reserved5[9]; /* */
+ AT91_REG PIO_OWER; /* Output Write Enable Register */
+ AT91_REG PIO_OWDR; /* Output Write Disable Register */
+ AT91_REG PIO_OWSR; /* Output Write Status Register */
} AT91S_PIO, *AT91PS_PIO;
@@ -189,30 +189,30 @@ typedef struct _AT91S_PIO
/*****************************************************************************/
typedef struct _AT91S_DBGU
{
- AT91_REG DBGU_CR; /* Control Register */
- AT91_REG DBGU_MR; /* Mode Register */
- AT91_REG DBGU_IER; /* Interrupt Enable Register */
- AT91_REG DBGU_IDR; /* Interrupt Disable Register */
- AT91_REG DBGU_IMR; /* Interrupt Mask Register */
- AT91_REG DBGU_CSR; /* Channel Status Register */
- AT91_REG DBGU_RHR; /* Receiver Holding Register */
- AT91_REG DBGU_THR; /* Transmitter Holding Register */
- AT91_REG DBGU_BRGR; /* Baud Rate Generator Register */
- AT91_REG Reserved0[7]; /* */
- AT91_REG DBGU_C1R; /* Chip ID1 Register */
- AT91_REG DBGU_C2R; /* Chip ID2 Register */
- AT91_REG DBGU_FNTR; /* Force NTRST Register */
- AT91_REG Reserved1[45]; /* */
- AT91_REG DBGU_RPR; /* Receive Pointer Register */
- AT91_REG DBGU_RCR; /* Receive Counter Register */
- AT91_REG DBGU_TPR; /* Transmit Pointer Register */
- AT91_REG DBGU_TCR; /* Transmit Counter Register */
- AT91_REG DBGU_RNPR; /* Receive Next Pointer Register */
- AT91_REG DBGU_RNCR; /* Receive Next Counter Register */
- AT91_REG DBGU_TNPR; /* Transmit Next Pointer Register */
- AT91_REG DBGU_TNCR; /* Transmit Next Counter Register */
- AT91_REG DBGU_PTCR; /* PDC Transfer Control Register */
- AT91_REG DBGU_PTSR; /* PDC Transfer Status Register */
+ AT91_REG DBGU_CR; /* Control Register */
+ AT91_REG DBGU_MR; /* Mode Register */
+ AT91_REG DBGU_IER; /* Interrupt Enable Register */
+ AT91_REG DBGU_IDR; /* Interrupt Disable Register */
+ AT91_REG DBGU_IMR; /* Interrupt Mask Register */
+ AT91_REG DBGU_CSR; /* Channel Status Register */
+ AT91_REG DBGU_RHR; /* Receiver Holding Register */
+ AT91_REG DBGU_THR; /* Transmitter Holding Register */
+ AT91_REG DBGU_BRGR; /* Baud Rate Generator Register */
+ AT91_REG Reserved0[7]; /* */
+ AT91_REG DBGU_C1R; /* Chip ID1 Register */
+ AT91_REG DBGU_C2R; /* Chip ID2 Register */
+ AT91_REG DBGU_FNTR; /* Force NTRST Register */
+ AT91_REG Reserved1[45]; /* */
+ AT91_REG DBGU_RPR; /* Receive Pointer Register */
+ AT91_REG DBGU_RCR; /* Receive Counter Register */
+ AT91_REG DBGU_TPR; /* Transmit Pointer Register */
+ AT91_REG DBGU_TCR; /* Transmit Counter Register */
+ AT91_REG DBGU_RNPR; /* Receive Next Pointer Register */
+ AT91_REG DBGU_RNCR; /* Receive Next Counter Register */
+ AT91_REG DBGU_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG DBGU_TNCR; /* Transmit Next Counter Register */
+ AT91_REG DBGU_PTCR; /* PDC Transfer Control Register */
+ AT91_REG DBGU_PTSR; /* PDC Transfer Status Register */
} AT91S_DBGU, *AT91PS_DBGU;
/* -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- */
@@ -247,7 +247,7 @@ typedef struct _AT91S_DBGU
/*****************************************************************************/
typedef struct _AT91S_SMC2
{
- AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */
+ AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */
} AT91S_SMC2, *AT91PS_SMC2;
/* -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- */
@@ -272,21 +272,21 @@ typedef struct _AT91S_SMC2
/*****************************************************************************/
typedef struct _AT91S_PMC
{
- AT91_REG PMC_SCER; /* System Clock Enable Register */
- AT91_REG PMC_SCDR; /* System Clock Disable Register */
- AT91_REG PMC_SCSR; /* System Clock Status Register */
- AT91_REG Reserved0[1]; /* */
- AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */
- AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */
- AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */
- AT91_REG Reserved1[5]; /* */
- AT91_REG PMC_MCKR; /* Master Clock Register */
- AT91_REG Reserved2[3]; /* */
- AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */
- AT91_REG PMC_IER; /* Interrupt Enable Register */
- AT91_REG PMC_IDR; /* Interrupt Disable Register */
- AT91_REG PMC_SR; /* Status Register */
- AT91_REG PMC_IMR; /* Interrupt Mask Register */
+ AT91_REG PMC_SCER; /* System Clock Enable Register */
+ AT91_REG PMC_SCDR; /* System Clock Disable Register */
+ AT91_REG PMC_SCSR; /* System Clock Status Register */
+ AT91_REG Reserved0[1]; /* */
+ AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */
+ AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */
+ AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */
+ AT91_REG Reserved1[5]; /* */
+ AT91_REG PMC_MCKR; /* Master Clock Register */
+ AT91_REG Reserved2[3]; /* */
+ AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */
+ AT91_REG PMC_IER; /* Interrupt Enable Register */
+ AT91_REG PMC_IDR; /* Interrupt Disable Register */
+ AT91_REG PMC_SR; /* Status Register */
+ AT91_REG PMC_IMR; /* Interrupt Mask Register */
} AT91S_PMC, *AT91PS_PMC;
/*------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------*/
@@ -346,49 +346,49 @@ typedef struct _AT91S_PMC
/*****************************************************************************/
typedef struct _AT91S_EMAC
{
- AT91_REG EMAC_CTL; /* Network Control Register */
- AT91_REG EMAC_CFG; /* Network Configuration Register */
- AT91_REG EMAC_SR; /* Network Status Register */
- AT91_REG EMAC_TAR; /* Transmit Address Register */
- AT91_REG EMAC_TCR; /* Transmit Control Register */
- AT91_REG EMAC_TSR; /* Transmit Status Register */
- AT91_REG EMAC_RBQP; /* Receive Buffer Queue Pointer */
- AT91_REG Reserved0[1]; /* */
- AT91_REG EMAC_RSR; /* Receive Status Register */
- AT91_REG EMAC_ISR; /* Interrupt Status Register */
- AT91_REG EMAC_IER; /* Interrupt Enable Register */
- AT91_REG EMAC_IDR; /* Interrupt Disable Register */
- AT91_REG EMAC_IMR; /* Interrupt Mask Register */
- AT91_REG EMAC_MAN; /* PHY Maintenance Register */
- AT91_REG Reserved1[2]; /* */
- AT91_REG EMAC_FRA; /* Frames Transmitted OK Register */
- AT91_REG EMAC_SCOL; /* Single Collision Frame Register */
- AT91_REG EMAC_MCOL; /* Multiple Collision Frame Register */
- AT91_REG EMAC_OK; /* Frames Received OK Register */
- AT91_REG EMAC_SEQE; /* Frame Check Sequence Error Register */
- AT91_REG EMAC_ALE; /* Alignment Error Register */
- AT91_REG EMAC_DTE; /* Deferred Transmission Frame Register */
- AT91_REG EMAC_LCOL; /* Late Collision Register */
- AT91_REG EMAC_ECOL; /* Excessive Collision Register */
- AT91_REG EMAC_CSE; /* Carrier Sense Error Register */
- AT91_REG EMAC_TUE; /* Transmit Underrun Error Register */
- AT91_REG EMAC_CDE; /* Code Error Register */
- AT91_REG EMAC_ELR; /* Excessive Length Error Register */
- AT91_REG EMAC_RJB; /* Receive Jabber Register */
- AT91_REG EMAC_USF; /* Undersize Frame Register */
- AT91_REG EMAC_SQEE; /* SQE Test Error Register */
- AT91_REG EMAC_DRFC; /* Discarded RX Frame Register */
- AT91_REG Reserved2[3]; /* */
- AT91_REG EMAC_HSH; /* Hash Address High[63:32] */
- AT91_REG EMAC_HSL; /* Hash Address Low[31:0] */
- AT91_REG EMAC_SA1L; /* Specific Address 1 Low, First 4 bytes */
- AT91_REG EMAC_SA1H; /* Specific Address 1 High, Last 2 bytes */
- AT91_REG EMAC_SA2L; /* Specific Address 2 Low, First 4 bytes */
- AT91_REG EMAC_SA2H; /* Specific Address 2 High, Last 2 bytes */
- AT91_REG EMAC_SA3L; /* Specific Address 3 Low, First 4 bytes */
- AT91_REG EMAC_SA3H; /* Specific Address 3 High, Last 2 bytes */
- AT91_REG EMAC_SA4L; /* Specific Address 4 Low, First 4 bytes */
- AT91_REG EMAC_SA4H; /* Specific Address 4 High, Last 2 bytesr */
+ AT91_REG EMAC_CTL; /* Network Control Register */
+ AT91_REG EMAC_CFG; /* Network Configuration Register */
+ AT91_REG EMAC_SR; /* Network Status Register */
+ AT91_REG EMAC_TAR; /* Transmit Address Register */
+ AT91_REG EMAC_TCR; /* Transmit Control Register */
+ AT91_REG EMAC_TSR; /* Transmit Status Register */
+ AT91_REG EMAC_RBQP; /* Receive Buffer Queue Pointer */
+ AT91_REG Reserved0[1]; /* */
+ AT91_REG EMAC_RSR; /* Receive Status Register */
+ AT91_REG EMAC_ISR; /* Interrupt Status Register */
+ AT91_REG EMAC_IER; /* Interrupt Enable Register */
+ AT91_REG EMAC_IDR; /* Interrupt Disable Register */
+ AT91_REG EMAC_IMR; /* Interrupt Mask Register */
+ AT91_REG EMAC_MAN; /* PHY Maintenance Register */
+ AT91_REG Reserved1[2]; /* */
+ AT91_REG EMAC_FRA; /* Frames Transmitted OK Register */
+ AT91_REG EMAC_SCOL; /* Single Collision Frame Register */
+ AT91_REG EMAC_MCOL; /* Multiple Collision Frame Register */
+ AT91_REG EMAC_OK; /* Frames Received OK Register */
+ AT91_REG EMAC_SEQE; /* Frame Check Sequence Error Register */
+ AT91_REG EMAC_ALE; /* Alignment Error Register */
+ AT91_REG EMAC_DTE; /* Deferred Transmission Frame Register */
+ AT91_REG EMAC_LCOL; /* Late Collision Register */
+ AT91_REG EMAC_ECOL; /* Excessive Collision Register */
+ AT91_REG EMAC_CSE; /* Carrier Sense Error Register */
+ AT91_REG EMAC_TUE; /* Transmit Underrun Error Register */
+ AT91_REG EMAC_CDE; /* Code Error Register */
+ AT91_REG EMAC_ELR; /* Excessive Length Error Register */
+ AT91_REG EMAC_RJB; /* Receive Jabber Register */
+ AT91_REG EMAC_USF; /* Undersize Frame Register */
+ AT91_REG EMAC_SQEE; /* SQE Test Error Register */
+ AT91_REG EMAC_DRFC; /* Discarded RX Frame Register */
+ AT91_REG Reserved2[3]; /* */
+ AT91_REG EMAC_HSH; /* Hash Address High[63:32] */
+ AT91_REG EMAC_HSL; /* Hash Address Low[31:0] */
+ AT91_REG EMAC_SA1L; /* Specific Address 1 Low, First 4 bytes */
+ AT91_REG EMAC_SA1H; /* Specific Address 1 High, Last 2 bytes */
+ AT91_REG EMAC_SA2L; /* Specific Address 2 Low, First 4 bytes */
+ AT91_REG EMAC_SA2H; /* Specific Address 2 High, Last 2 bytes */
+ AT91_REG EMAC_SA3L; /* Specific Address 3 Low, First 4 bytes */
+ AT91_REG EMAC_SA3H; /* Specific Address 3 High, Last 2 bytes */
+ AT91_REG EMAC_SA4L; /* Specific Address 4 Low, First 4 bytes */
+ AT91_REG EMAC_SA4H; /* Specific Address 4 High, Last 2 bytesr */
} AT91S_EMAC, *AT91PS_EMAC;
/* -------- EMAC_CTL : (EMAC Offset: 0x0) -------- */
@@ -476,27 +476,27 @@ typedef struct _AT91S_EMAC
/*****************************************************************************/
typedef struct _AT91S_SPI
{
- AT91_REG SPI_CR; /* Control Register */
- AT91_REG SPI_MR; /* Mode Register */
- AT91_REG SPI_RDR; /* Receive Data Register */
- AT91_REG SPI_TDR; /* Transmit Data Register */
- AT91_REG SPI_SR; /* Status Register */
- AT91_REG SPI_IER; /* Interrupt Enable Register */
- AT91_REG SPI_IDR; /* Interrupt Disable Register */
- AT91_REG SPI_IMR; /* Interrupt Mask Register */
- AT91_REG Reserved0[4]; /* */
- AT91_REG SPI_CSR[4]; /* Chip Select Register */
+ AT91_REG SPI_CR; /* Control Register */
+ AT91_REG SPI_MR; /* Mode Register */
+ AT91_REG SPI_RDR; /* Receive Data Register */
+ AT91_REG SPI_TDR; /* Transmit Data Register */
+ AT91_REG SPI_SR; /* Status Register */
+ AT91_REG SPI_IER; /* Interrupt Enable Register */
+ AT91_REG SPI_IDR; /* Interrupt Disable Register */
+ AT91_REG SPI_IMR; /* Interrupt Mask Register */
+ AT91_REG Reserved0[4]; /* */
+ AT91_REG SPI_CSR[4]; /* Chip Select Register */
AT91_REG Reserved1[48]; /* */
- AT91_REG SPI_RPR; /* Receive Pointer Register */
- AT91_REG SPI_RCR; /* Receive Counter Register */
- AT91_REG SPI_TPR; /* Transmit Pointer Register */
- AT91_REG SPI_TCR; /* Transmit Counter Register */
- AT91_REG SPI_RNPR; /* Receive Next Pointer Register */
- AT91_REG SPI_RNCR; /* Receive Next Counter Register */
- AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */
- AT91_REG SPI_TNCR; /* Transmit Next Counter Register */
- AT91_REG SPI_PTCR; /* PDC Transfer Control Register */
- AT91_REG SPI_PTSR; /* PDC Transfer Status Register */
+ AT91_REG SPI_RPR; /* Receive Pointer Register */
+ AT91_REG SPI_RCR; /* Receive Counter Register */
+ AT91_REG SPI_TPR; /* Transmit Pointer Register */
+ AT91_REG SPI_TCR; /* Transmit Counter Register */
+ AT91_REG SPI_RNPR; /* Receive Next Pointer Register */
+ AT91_REG SPI_RNCR; /* Receive Next Counter Register */
+ AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG SPI_TNCR; /* Transmit Next Counter Register */
+ AT91_REG SPI_PTCR; /* PDC Transfer Control Register */
+ AT91_REG SPI_PTSR; /* PDC Transfer Status Register */
} AT91S_SPI, *AT91PS_SPI;
/* -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- */
@@ -560,16 +560,16 @@ typedef struct _AT91S_SPI
/*****************************************************************************/
typedef struct _AT91S_PDC
{
- AT91_REG PDC_RPR; /* Receive Pointer Register */
- AT91_REG PDC_RCR; /* Receive Counter Register */
- AT91_REG PDC_TPR; /* Transmit Pointer Register */
- AT91_REG PDC_TCR; /* Transmit Counter Register */
- AT91_REG PDC_RNPR; /* Receive Next Pointer Register */
- AT91_REG PDC_RNCR; /* Receive Next Counter Register */
- AT91_REG PDC_TNPR; /* Transmit Next Pointer Register */
- AT91_REG PDC_TNCR; /* Transmit Next Counter Register */
- AT91_REG PDC_PTCR; /* PDC Transfer Control Register */
- AT91_REG PDC_PTSR; /* PDC Transfer Status Register */
+ AT91_REG PDC_RPR; /* Receive Pointer Register */
+ AT91_REG PDC_RCR; /* Receive Counter Register */
+ AT91_REG PDC_TPR; /* Transmit Pointer Register */
+ AT91_REG PDC_TCR; /* Transmit Counter Register */
+ AT91_REG PDC_RNPR; /* Receive Next Pointer Register */
+ AT91_REG PDC_RNCR; /* Receive Next Counter Register */
+ AT91_REG PDC_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG PDC_TNCR; /* Transmit Next Counter Register */
+ AT91_REG PDC_PTCR; /* PDC Transfer Control Register */
+ AT91_REG PDC_PTSR; /* PDC Transfer Status Register */
} AT91S_PDC, *AT91PS_PDC;
/* -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- */
@@ -700,7 +700,7 @@ typedef struct _AT91S_PDC
#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) /* Pin Controlled by PB5 */
#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */
#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) /* Pin Controlled by PB7 */
-#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) /* Pin Controlled by PB22 */
+#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) /* Pin Controlled by PB22 */
#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */
#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */
#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) /* Ethernet MAC Force 100 Mbits */
@@ -775,7 +775,7 @@ typedef struct _AT91S_PDC
#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) /* (TCB0) TC Block Control Register */
#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) /* (PIOC) PIO Disable Register */
#define AT91C_PIOC_PER ((AT91_REG *) 0xFFFFF800) /* (PIOC) PIO Enable Register */
-#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) /* (PIOC) Output Disable Registerr */
+#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) /* (PIOC) Output Disable Registerr */
#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) /* (PIOB) PIO Enable Register */
#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */
#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */
diff --git a/include/asm-arm/arch-at91sam9/gpio.h b/include/asm-arm/arch-at91sam9/gpio.h
index c157e10..c4d7b97 100644
--- a/include/asm-arm/arch-at91sam9/gpio.h
+++ b/include/asm-arm/arch-at91sam9/gpio.h
@@ -218,7 +218,7 @@ static inline unsigned pin_to_mask(unsigned pin)
*/
static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
{
- void *pio = pin_to_controller(pin);
+ void *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
@@ -232,7 +232,7 @@ static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
*/
static inline int at91_set_A_periph(unsigned pin, int use_pullup)
{
- void *pio = pin_to_controller(pin);
+ void *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
diff --git a/include/asm-arm/arch-ixp/ixp425.h b/include/asm-arm/arch-ixp/ixp425.h
index 11dc356..2114437 100644
--- a/include/asm-arm/arch-ixp/ixp425.h
+++ b/include/asm-arm/arch-ixp/ixp425.h
@@ -53,13 +53,13 @@
*
* 0x6000000 0x00004000 0x4000 0xFFFEB000 QMgr
*
- * 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG
+ * 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG
*
* 0xC4000000 0x100 0x1000 0xFFFDE000 EXP CFG
*
* 0xC8000000 0xC000 0xC000 0xFFFDF000 PERIPHERAL
*
- * 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG
+ * 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG
*/
/*
@@ -171,17 +171,17 @@
#define IXP425_SDR_REFRESH_OFFSET 0x04
#define IXP425_SDR_IR_OFFSET 0x08
-#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x))
+#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x))
#define IXP425_SDR_CONFIG IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET)
-#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
-#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
+#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
+#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
/*
* UART registers
*/
-#define IXP425_UART1 0
-#define IXP425_UART2 0x1000
+#define IXP425_UART1 0
+#define IXP425_UART2 0x1000
#define IXP425_UART_RBR_OFFSET 0x00
#define IXP425_UART_THR_OFFSET 0x00
@@ -476,49 +476,49 @@
*/
/* CSR bit definitions */
-#define PCI_CSR_HOST BIT(0)
-#define PCI_CSR_ARBEN BIT(1)
-#define PCI_CSR_ADS BIT(2)
-#define PCI_CSR_PDS BIT(3)
-#define PCI_CSR_ABE BIT(4)
-#define PCI_CSR_DBT BIT(5)
-#define PCI_CSR_ASE BIT(8)
-#define PCI_CSR_IC BIT(15)
+#define PCI_CSR_HOST BIT(0)
+#define PCI_CSR_ARBEN BIT(1)
+#define PCI_CSR_ADS BIT(2)
+#define PCI_CSR_PDS BIT(3)
+#define PCI_CSR_ABE BIT(4)
+#define PCI_CSR_DBT BIT(5)
+#define PCI_CSR_ASE BIT(8)
+#define PCI_CSR_IC BIT(15)
/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE BIT(0)
-#define PCI_ISR_PFE BIT(1)
-#define PCI_ISR_PPE BIT(2)
-#define PCI_ISR_AHBE BIT(3)
-#define PCI_ISR_APDC BIT(4)
-#define PCI_ISR_PADC BIT(5)
-#define PCI_ISR_ADB BIT(6)
-#define PCI_ISR_PDB BIT(7)
+#define PCI_ISR_PSE BIT(0)
+#define PCI_ISR_PFE BIT(1)
+#define PCI_ISR_PPE BIT(2)
+#define PCI_ISR_AHBE BIT(3)
+#define PCI_ISR_APDC BIT(4)
+#define PCI_ISR_PADC BIT(5)
+#define PCI_ISR_ADB BIT(6)
+#define PCI_ISR_PDB BIT(7)
/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE BIT(0)
-#define PCI_INTEN_PFE BIT(1)
-#define PCI_INTEN_PPE BIT(2)
-#define PCI_INTEN_AHBE BIT(3)
-#define PCI_INTEN_APDC BIT(4)
-#define PCI_INTEN_PADC BIT(5)
-#define PCI_INTEN_ADB BIT(6)
-#define PCI_INTEN_PDB BIT(7)
+#define PCI_INTEN_PSE BIT(0)
+#define PCI_INTEN_PFE BIT(1)
+#define PCI_INTEN_PPE BIT(2)
+#define PCI_INTEN_AHBE BIT(3)
+#define PCI_INTEN_APDC BIT(4)
+#define PCI_INTEN_PADC BIT(5)
+#define PCI_INTEN_ADB BIT(6)
+#define PCI_INTEN_PDB BIT(7)
/*
* Shift value for byte enable on NP cmd/byte enable register
*/
-#define IXP425_PCI_NP_CBE_BESL 4
+#define IXP425_PCI_NP_CBE_BESL 4
/*
* PCI commands supported by NP access unit
*/
-#define NP_CMD_IOREAD 0x2
-#define NP_CMD_IOWRITE 0x3
-#define NP_CMD_CONFIGREAD 0xa
-#define NP_CMD_CONFIGWRITE 0xb
-#define NP_CMD_MEMREAD 0x6
-#define NP_CMD_MEMWRITE 0x7
+#define NP_CMD_IOREAD 0x2
+#define NP_CMD_IOWRITE 0x3
+#define NP_CMD_CONFIGREAD 0xa
+#define NP_CMD_CONFIGWRITE 0xb
+#define NP_CMD_MEMREAD 0x6
+#define NP_CMD_MEMWRITE 0x7
#if 0
#ifndef __ASSEMBLY__
diff --git a/include/asm-arm/arch-omap24xx/clocks.h b/include/asm-arm/arch-omap24xx/clocks.h
index 2a95af1..2e92569 100644
--- a/include/asm-arm/arch-omap24xx/clocks.h
+++ b/include/asm-arm/arch-omap24xx/clocks.h
@@ -35,9 +35,9 @@
; PRCM Scheme II
;
; Enable clocks and DPLL for:
-; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50
-; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
-; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0]
+; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50
+; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
+; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0]
; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0]
; DSPI=100 6 CM_CLKSEL_DSP[6:5]
; DSP_S bypass CM_CLKSEL_DSP[7]
@@ -64,9 +64,9 @@
; PRCM Scheme III
;
; Enable clocks and DPLL for:
-; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266
-; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
-; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0]
+; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266
+; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
+; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0]
; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0]
; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5]
; DSP_S ACTIVATED CM_CLKSEL_DSP[7]
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/include/asm-arm/arch-pxa/bitfield.h
index 2ac5ea2..104a21c 100644
--- a/include/asm-arm/arch-pxa/bitfield.h
+++ b/include/asm-arm/arch-pxa/bitfield.h
@@ -1,13 +1,13 @@
/*
- * FILE bitfield.h
+ * FILE bitfield.h
*
- * Version 1.1
- * Author Copyright (c) Marc A. Viredaz, 1998
- * DEC Western Research Laboratory, Palo Alto, CA
- * Date April 1998 (April 1997)
- * System Advanced RISC Machine (ARM)
+ * Version 1.1
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date April 1998 (April 1997)
+ * System Advanced RISC Machine (ARM)
* Language C or ARM Assembly
- * Purpose Definition of macros to operate on bit fields.
+ * Purpose Definition of macros to operate on bit fields.
*/
@@ -35,11 +35,11 @@
* line-size limit).
*
* Input
- * Size Size of the bit field, in number of bits.
- * Shft Shift value of the bit field with respect to bit 0.
+ * Size Size of the bit field, in number of bits.
+ * Shft Shift value of the bit field with respect to bit 0.
*
* Output
- * Fld Encoded bit field.
+ * Fld Encoded bit field.
*/
#define Fld(Size, Shft) (((Size) << 16) + (Shft))
@@ -54,14 +54,14 @@
* bit field.
*
* Input
- * Field Encoded bit field (using the macro "Fld").
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FSize Size of the bit field, in number of bits.
- * FShft Shift value of the bit field with respect to bit 0.
- * FMsk Mask for the bit field.
- * FAlnMsk Mask for the bit field, aligned on bit 0.
- * F1stBit First bit of the bit field.
+ * FSize Size of the bit field, in number of bits.
+ * FShft Shift value of the bit field with respect to bit 0.
+ * FMsk Mask for the bit field.
+ * FAlnMsk Mask for the bit field, aligned on bit 0.
+ * F1stBit First bit of the bit field.
*/
#define FSize(Field) ((Field) >> 16)
@@ -79,11 +79,11 @@
* former appropriately.
*
* Input
- * Value Bit-field value.
- * Field Encoded bit field (using the macro "Fld").
+ * Value Bit-field value.
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FInsrt Bit-field value positioned appropriately.
+ * FInsrt Bit-field value positioned appropriately.
*/
#define FInsrt(Value, Field) \
@@ -98,11 +98,11 @@
* shifting it appropriately.
*
* Input
- * Data Data containing the bit-field to be extracted.
- * Field Encoded bit field (using the macro "Fld").
+ * Data Data containing the bit-field to be extracted.
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FExtr Bit-field value.
+ * FExtr Bit-field value.
*/
#define FExtr(Data, Field) \
diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
index b9304b1..9440d80 100644
--- a/include/asm-arm/arch-pxa/mmc.h
+++ b/include/asm-arm/arch-pxa/mmc.h
@@ -16,95 +16,95 @@
/* PXA-250 MMC controller registers */
/* MMC_STRPCL */
-#define MMC_STRPCL_STOP_CLK (0x0001UL)
+#define MMC_STRPCL_STOP_CLK (0x0001UL)
#define MMC_STRPCL_START_CLK (0x0002UL)
/* MMC_STAT */
#define MMC_STAT_END_CMD_RES (0x0001UL << 13)
-#define MMC_STAT_PRG_DONE (0x0001UL << 12)
-#define MMC_STAT_DATA_TRAN_DONE (0x0001UL << 11)
-#define MMC_STAT_CLK_EN (0x0001UL << 8)
-#define MMC_STAT_RECV_FIFO_FULL (0x0001UL << 7)
-#define MMC_STAT_XMIT_FIFO_EMPTY (0x0001UL << 6)
-#define MMC_STAT_RES_CRC_ERROR (0x0001UL << 5)
+#define MMC_STAT_PRG_DONE (0x0001UL << 12)
+#define MMC_STAT_DATA_TRAN_DONE (0x0001UL << 11)
+#define MMC_STAT_CLK_EN (0x0001UL << 8)
+#define MMC_STAT_RECV_FIFO_FULL (0x0001UL << 7)
+#define MMC_STAT_XMIT_FIFO_EMPTY (0x0001UL << 6)
+#define MMC_STAT_RES_CRC_ERROR (0x0001UL << 5)
#define MMC_STAT_SPI_READ_ERROR_TOKEN (0x0001UL << 4)
-#define MMC_STAT_CRC_READ_ERROR (0x0001UL << 3)
-#define MMC_STAT_CRC_WRITE_ERROR (0x0001UL << 2)
-#define MMC_STAT_TIME_OUT_RESPONSE (0x0001UL << 1)
-#define MMC_STAT_READ_TIME_OUT (0x0001UL)
+#define MMC_STAT_CRC_READ_ERROR (0x0001UL << 3)
+#define MMC_STAT_CRC_WRITE_ERROR (0x0001UL << 2)
+#define MMC_STAT_TIME_OUT_RESPONSE (0x0001UL << 1)
+#define MMC_STAT_READ_TIME_OUT (0x0001UL)
#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR|MMC_STAT_SPI_READ_ERROR_TOKEN\
|MMC_STAT_CRC_READ_ERROR|MMC_STAT_TIME_OUT_RESPONSE\
|MMC_STAT_READ_TIME_OUT|MMC_STAT_CRC_WRITE_ERROR)
/* MMC_CLKRT */
-#define MMC_CLKRT_20MHZ (0x0000UL)
-#define MMC_CLKRT_10MHZ (0x0001UL)
-#define MMC_CLKRT_5MHZ (0x0002UL)
+#define MMC_CLKRT_20MHZ (0x0000UL)
+#define MMC_CLKRT_10MHZ (0x0001UL)
+#define MMC_CLKRT_5MHZ (0x0002UL)
#define MMC_CLKRT_2_5MHZ (0x0003UL)
-#define MMC_CLKRT_1_25MHZ (0x0004UL)
-#define MMC_CLKRT_0_625MHZ (0x0005UL)
-#define MMC_CLKRT_0_3125MHZ (0x0006UL)
+#define MMC_CLKRT_1_25MHZ (0x0004UL)
+#define MMC_CLKRT_0_625MHZ (0x0005UL)
+#define MMC_CLKRT_0_3125MHZ (0x0006UL)
/* MMC_SPI */
-#define MMC_SPI_DISABLE (0x00UL)
-#define MMC_SPI_EN (0x01UL)
-#define MMC_SPI_CS_EN (0x01UL << 2)
-#define MMC_SPI_CS_ADDRESS (0x01UL << 3)
-#define MMC_SPI_CRC_ON (0x01UL << 1)
+#define MMC_SPI_DISABLE (0x00UL)
+#define MMC_SPI_EN (0x01UL)
+#define MMC_SPI_CS_EN (0x01UL << 2)
+#define MMC_SPI_CS_ADDRESS (0x01UL << 3)
+#define MMC_SPI_CRC_ON (0x01UL << 1)
/* MMC_CMDAT */
#define MMC_CMDAT_SD_4DAT (0x0001UL << 8)
#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7)
-#define MMC_CMDAT_INIT (0x0001UL << 6)
-#define MMC_CMDAT_BUSY (0x0001UL << 5)
-#define MMC_CMDAT_BCR (0x0003UL << 5)
+#define MMC_CMDAT_INIT (0x0001UL << 6)
+#define MMC_CMDAT_BUSY (0x0001UL << 5)
+#define MMC_CMDAT_BCR (0x0003UL << 5)
#define MMC_CMDAT_STREAM (0x0001UL << 4)
-#define MMC_CMDAT_BLOCK (0x0000UL << 4)
-#define MMC_CMDAT_WRITE (0x0001UL << 3)
-#define MMC_CMDAT_READ (0x0000UL << 3)
-#define MMC_CMDAT_DATA_EN (0x0001UL << 2)
-#define MMC_CMDAT_R0 (0)
-#define MMC_CMDAT_R1 (0x0001UL)
-#define MMC_CMDAT_R2 (0x0002UL)
-#define MMC_CMDAT_R3 (0x0003UL)
+#define MMC_CMDAT_BLOCK (0x0000UL << 4)
+#define MMC_CMDAT_WRITE (0x0001UL << 3)
+#define MMC_CMDAT_READ (0x0000UL << 3)
+#define MMC_CMDAT_DATA_EN (0x0001UL << 2)
+#define MMC_CMDAT_R0 (0)
+#define MMC_CMDAT_R1 (0x0001UL)
+#define MMC_CMDAT_R2 (0x0002UL)
+#define MMC_CMDAT_R3 (0x0003UL)
/* MMC_RESTO */
-#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */
+#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */
/* MMC_RDTO */
-#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */
+#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */
/* MMC_BLKLEN */
-#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */
+#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */
/* MMC_PRTBUF */
-#define MMC_PRTBUF_BUF_PART_FULL (0x01UL)
+#define MMC_PRTBUF_BUF_PART_FULL (0x01UL)
#define MMC_PRTBUF_BUF_FULL (0x00UL )
/* MMC_I_MASK */
#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6)
#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5)
-#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4)
-#define MMC_I_MASK_STOP_CMD (0x01UL << 3)
-#define MMC_I_MASK_END_CMD_RES (0x01UL << 2)
-#define MMC_I_MASK_PRG_DONE (0x01UL << 1)
+#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4)
+#define MMC_I_MASK_STOP_CMD (0x01UL << 3)
+#define MMC_I_MASK_END_CMD_RES (0x01UL << 2)
+#define MMC_I_MASK_PRG_DONE (0x01UL << 1)
#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL)
-#define MMC_I_MASK_ALL (0x07fUL)
+#define MMC_I_MASK_ALL (0x07fUL)
/* MMC_I_REG */
-#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6)
-#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5)
+#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6)
+#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5)
#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4)
-#define MMC_I_REG_STOP_CMD (0x01UL << 3)
-#define MMC_I_REG_END_CMD_RES (0x01UL << 2)
-#define MMC_I_REG_PRG_DONE (0x01UL << 1)
-#define MMC_I_REG_DATA_TRAN_DONE (0x01UL)
-#define MMC_I_REG_ALL (0x007fUL)
+#define MMC_I_REG_STOP_CMD (0x01UL << 3)
+#define MMC_I_REG_END_CMD_RES (0x01UL << 2)
+#define MMC_I_REG_PRG_DONE (0x01UL << 1)
+#define MMC_I_REG_DATA_TRAN_DONE (0x01UL)
+#define MMC_I_REG_ALL (0x007fUL)
/* MMC_CMD */
-#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */
+#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */
#define CMD(x) (x)
#define MMC_DEFAULT_RCA 1
@@ -112,11 +112,11 @@
#define MMC_BLOCK_SIZE 512
#define MMC_CMD_RESET 0
#define MMC_CMD_SEND_OP_COND 1
-#define MMC_CMD_ALL_SEND_CID 2
+#define MMC_CMD_ALL_SEND_CID 2
#define MMC_CMD_SET_RCA 3
#define MMC_CMD_SELECT_CARD 7
-#define MMC_CMD_SEND_CSD 9
-#define MMC_CMD_SEND_CID 10
+#define MMC_CMD_SEND_CSD 9
+#define MMC_CMD_SEND_CID 10
#define MMC_CMD_SEND_STATUS 13
#define MMC_CMD_SET_BLOCKLEN 16
#define MMC_CMD_READ_BLOCK 17
@@ -203,5 +203,4 @@ typedef struct mmc_csd
ecc:2;
} mmc_csd_t;
-
#endif /* __MMC_PXA_P_H__ */
diff --git a/include/asm-arm/arch-s3c24x0/memory.h b/include/asm-arm/arch-s3c24x0/memory.h
index 333f218..5e254d2 100644
--- a/include/asm-arm/arch-s3c24x0/memory.h
+++ b/include/asm-arm/arch-s3c24x0/memory.h
@@ -103,10 +103,10 @@ extern unsigned long __phys_to_virt(unsigned long ppage);
* The nodes are matched with the physical memory bank addresses which are
* incidentally the same as virtual addresses.
*
- * node 0: 0xc0000000 - 0xc7ffffff
- * node 1: 0xc8000000 - 0xcfffffff
- * node 2: 0xd0000000 - 0xd7ffffff
- * node 3: 0xd8000000 - 0xdfffffff
+ * node 0: 0xc0000000 - 0xc7ffffff
+ * node 1: 0xc8000000 - 0xcfffffff
+ * node 2: 0xd0000000 - 0xd7ffffff
+ * node 3: 0xd8000000 - 0xdfffffff
*/
#define NR_NODES 4
diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/include/asm-arm/arch-sa1100/bitfield.h
index 2ac5ea2..104a21c 100644
--- a/include/asm-arm/arch-sa1100/bitfield.h
+++ b/include/asm-arm/arch-sa1100/bitfield.h
@@ -1,13 +1,13 @@
/*
- * FILE bitfield.h
+ * FILE bitfield.h
*
- * Version 1.1
- * Author Copyright (c) Marc A. Viredaz, 1998
- * DEC Western Research Laboratory, Palo Alto, CA
- * Date April 1998 (April 1997)
- * System Advanced RISC Machine (ARM)
+ * Version 1.1
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date April 1998 (April 1997)
+ * System Advanced RISC Machine (ARM)
* Language C or ARM Assembly
- * Purpose Definition of macros to operate on bit fields.
+ * Purpose Definition of macros to operate on bit fields.
*/
@@ -35,11 +35,11 @@
* line-size limit).
*
* Input
- * Size Size of the bit field, in number of bits.
- * Shft Shift value of the bit field with respect to bit 0.
+ * Size Size of the bit field, in number of bits.
+ * Shft Shift value of the bit field with respect to bit 0.
*
* Output
- * Fld Encoded bit field.
+ * Fld Encoded bit field.
*/
#define Fld(Size, Shft) (((Size) << 16) + (Shft))
@@ -54,14 +54,14 @@
* bit field.
*
* Input
- * Field Encoded bit field (using the macro "Fld").
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FSize Size of the bit field, in number of bits.
- * FShft Shift value of the bit field with respect to bit 0.
- * FMsk Mask for the bit field.
- * FAlnMsk Mask for the bit field, aligned on bit 0.
- * F1stBit First bit of the bit field.
+ * FSize Size of the bit field, in number of bits.
+ * FShft Shift value of the bit field with respect to bit 0.
+ * FMsk Mask for the bit field.
+ * FAlnMsk Mask for the bit field, aligned on bit 0.
+ * F1stBit First bit of the bit field.
*/
#define FSize(Field) ((Field) >> 16)
@@ -79,11 +79,11 @@
* former appropriately.
*
* Input
- * Value Bit-field value.
- * Field Encoded bit field (using the macro "Fld").
+ * Value Bit-field value.
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FInsrt Bit-field value positioned appropriately.
+ * FInsrt Bit-field value positioned appropriately.
*/
#define FInsrt(Value, Field) \
@@ -98,11 +98,11 @@
* shifting it appropriately.
*
* Input
- * Data Data containing the bit-field to be extracted.
- * Field Encoded bit field (using the macro "Fld").
+ * Data Data containing the bit-field to be extracted.
+ * Field Encoded bit field (using the macro "Fld").
*
* Output
- * FExtr Bit-field value.
+ * FExtr Bit-field value.
*/
#define FExtr(Data, Field) \
diff --git a/include/asm-arm/u-boot.h b/include/asm-arm/u-boot.h
index c120312..b11d555 100644
--- a/include/asm-arm/u-boot.h
+++ b/include/asm-arm/u-boot.h
@@ -47,7 +47,7 @@ typedef struct bd_info {
{
ulong start;
ulong size;
- } bi_dram[CONFIG_NR_DRAM_BANKS];
+ } bi_dram[CONFIG_NR_DRAM_BANKS];
#ifdef CONFIG_HAS_ETH1
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];
diff --git a/include/asm-avr32/arch-at32ap700x/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h
index fcfbbb3..6a33fef 100644
--- a/include/asm-avr32/arch-at32ap700x/mmc.h
+++ b/include/asm-avr32/arch-at32ap700x/mmc.h
@@ -74,13 +74,13 @@ struct mmc_csd
/* MMC Command numbers */
#define MMC_CMD_GO_IDLE_STATE 0
#define MMC_CMD_SEND_OP_COND 1
-#define MMC_CMD_ALL_SEND_CID 2
+#define MMC_CMD_ALL_SEND_CID 2
#define MMC_CMD_SET_RELATIVE_ADDR 3
#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3
#define MMC_CMD_SET_DSR 4
#define MMC_CMD_SELECT_CARD 7
-#define MMC_CMD_SEND_CSD 9
-#define MMC_CMD_SEND_CID 10
+#define MMC_CMD_SEND_CSD 9
+#define MMC_CMD_SEND_CID 10
#define MMC_CMD_SEND_STATUS 13
#define MMC_CMD_SET_BLOCKLEN 16
#define MMC_CMD_READ_SINGLE_BLOCK 17
diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h
index 7aa712f..e36af2d 100644
--- a/include/asm-blackfin/cplb.h
+++ b/include/asm-blackfin/cplb.h
@@ -42,8 +42,8 @@
#define CPLB_D_PAGE_MGMT CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID
#define CPLB_DNOCACHE CPLB_ALL_ACCESS | CPLB_VALID
#define CPLB_DDOCACHE CPLB_DNOCACHE | CPLB_DEF_CACHE
-#define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID
-#define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL
+#define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID
+#define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL
/* Data Attibutes*/
diff --git a/include/asm-blackfin/shared_resources.h b/include/asm-blackfin/shared_resources.h
index d280ffe..2ac8990 100644
--- a/include/asm-blackfin/shared_resources.h
+++ b/include/asm-blackfin/shared_resources.h
@@ -27,7 +27,7 @@
void swap_to(int device_id);
-#define FLASH 0
+#define FLASH 0
#define ETHERNET 1
#endif /* _SHARED_RESOURCES_H_ */
diff --git a/include/asm-i386/ic/sc520.h b/include/asm-i386/ic/sc520.h
index d5abbbe..0f7e7a5 100644
--- a/include/asm-i386/ic/sc520.h
+++ b/include/asm-i386/ic/sc520.h
@@ -25,209 +25,209 @@
#define _ASM_IC_SC520_H_ 1
/* Memory mapped configuration registers, MMCR */
-#define SC520_REVID 0x0000 /* ElanSC520 Microcontroller Revision ID Register */
-#define SC520_CPUCTL 0x0002 /* Am5x86 CPU Control Register */
-#define SC520_DRCCTL 0x0010 /* SDRAM Control Register */
-#define SC520_DRCTMCTL 0x0012 /* SDRAM Timing Control Register */
-#define SC520_DRCCFG 0x0014 /* SDRAM Bank Configuration Register*/
-#define SC520_DRCBENDADR 0x0018 /* SDRAM Bank 0-3 Ending Address Register*/
-#define SC520_ECCCTL 0x0020 /* ECC Control Register */
-#define SC520_ECCSTA 0x0021 /* ECC Status Register */
-#define SC520_ECCCKBPOS 0x0022 /* ECC Check Bit Position Register */
-#define SC520_ECCSBADD 0x0024 /* ECC Single-Bit Error Address Register */
-#define SC520_DBCTL 0x0040 /* SDRAM Buffer Control Register */
-#define SC520_BOOTCSCTL 0x0050 /* /BOOTCS Control Register */
-#define SC520_ROMCS1CTL 0x0054 /* /ROMCS1 Control Register */
-#define SC520_ROMCS2CTL 0x0056 /* /ROMCS2 Control Register */
-#define SC520_HBCTL 0x0060 /* Host Bridge Control Register */
-#define SC520_HBTGTIRQCTL 0x0062 /* Host Bridge Target Interrupt Control Register */
-#define SC520_HBTGTIRQSTA 0x0064 /* Host Bridge Target Interrupt Status Register */
-#define SC520_HBMSTIRQCTL 0x0066 /* Host Bridge Target Interrupt Control Register */
-#define SC520_HBMSTIRQSTA 0x0068 /* Host Bridge Master Interrupt Status Register */
-#define SC520_MSTINTADD 0x006c /* Host Bridge Master Interrupt Address Register */
-#define SC520_SYSARBCTL 0x0070 /* System Arbiter Control Register */
-#define SC520_PCIARBSTA 0x0071 /* PCI Bus Arbiter Status Register */
-#define SC520_SYSARBMENB 0x0072 /* System Arbiter Master Enable Register */
-#define SC520_ARBPRICTL 0x0074 /* Arbiter Priority Control Register */
-#define SC520_ADDDECCTL 0x0080 /* Address Decode Control Register */
-#define SC520_WPVSTA 0x0082 /* Write-Protect Violation Status Register */
-#define SC520_PAR0 0x0088 /* Programmable Address Region 0 Register */
-#define SC520_PAR1 0x008c /* Programmable Address Region 1 Register */
-#define SC520_PAR2 0x0090 /* Programmable Address Region 2 Register */
-#define SC520_PAR3 0x0094 /* Programmable Address Region 3 Register */
-#define SC520_PAR4 0x0098 /* Programmable Address Region 4 Register */
-#define SC520_PAR5 0x009c /* Programmable Address Region 5 Register */
-#define SC520_PAR6 0x00a0 /* Programmable Address Region 6 Register */
-#define SC520_PAR7 0x00a4 /* Programmable Address Region 7 Register */
-#define SC520_PAR8 0x00a8 /* Programmable Address Region 8 Register */
-#define SC520_PAR9 0x00ac /* Programmable Address Region 9 Register */
-#define SC520_PAR10 0x00b0 /* Programmable Address Region 10 Register */
-#define SC520_PAR11 0x00b4 /* Programmable Address Region 11 Register */
-#define SC520_PAR12 0x00b8 /* Programmable Address Region 12 Register */
-#define SC520_PAR13 0x00bc /* Programmable Address Region 13 Register */
-#define SC520_PAR14 0x00c0 /* Programmable Address Region 14 Register */
-#define SC520_PAR15 0x00c4 /* Programmable Address Region 15 Register */
-#define SC520_GPECHO 0x0c00 /* GP Echo Mode Register */
-#define SC520_GPCSDW 0x0c01 /* GP Chip Select Data Width Register */
-#define SC520_GPCSQUAL 0x0c02 /* GP Chip Select Qualification Register */
-#define SC520_GPCSRT 0x0c08 /* GP Chip Select Recovery Time Register */
-#define SC520_GPCSPW 0x0c09 /* GP Chip Select Pulse Width Register */
-#define SC520_GPCSOFF 0x0c0a /* GP Chip Select Offset Register */
-#define SC520_GPRDW 0x0c0b /* GP Read Pulse Width Register */
-#define SC520_GPRDOFF 0x0c0c /* GP Read Offset Register */
-#define SC520_GPWRW 0x0c0d /* GP Write Pulse Width Register */
-#define SC520_GPWROFF 0x0c0e /* GP Write Offset Register */
-#define SC520_GPALEW 0x0c0f /* GP ALE Pulse Width Register */
-#define SC520_GPALEOFF 0x0c10 /* GP ALE Offset Register */
-#define SC520_PIOPFS15_0 0x0c20 /* PIO15-PIO0 Pin Function Select */
-#define SC520_PIOPFS31_16 0x0c22 /* PIO31-PIO16 Pin Function Select */
-#define SC520_CSPFS 0x0c24 /* Chip Select Pin Function Select */
-#define SC520_CLKSEL 0x0c26 /* Clock Select */
-#define SC520_DSCTL 0x0c28 /* Drive Strength Control */
-#define SC520_PIODIR15_0 0x0c2a /* PIO15-PIO0 Direction */
-#define SC520_PIODIR31_16 0x0c2c /* PIO31-PIO16 Direction */
-#define SC520_PIODATA15_0 0x0c30 /* PIO15-PIO0 Data */
-#define SC520_PIODATA31_16 0x0c32 /* PIO31-PIO16 Data */
-#define SC520_PIOSET15_0 0x0c34 /* PIO15-PIO0 Set */
-#define SC520_PIOSET31_16 0x0c36 /* PIO31-PIO16 Set */
-#define SC520_PIOCLR15_0 0x0c38 /* PIO15-PIO0 Clear */
-#define SC520_PIOCLR31_16 0x0c3a /* PIO31-PIO16 Clear */
-#define SC520_SWTMRMILLI 0x0c60 /* Software Timer Millisecond Count */
-#define SC520_SWTMRMICRO 0x0c62 /* Software Timer Microsecond Count */
-#define SC520_SWTMRCFG 0x0c64 /* Software Timer Configuration */
-#define SC520_GPTMRSTA 0x0c70 /* GP Timers Status Register */
-#define SC520_GPTMR0CTL 0x0c72 /* GP Timer 0 Mode/Control Register */
-#define SC520_GPTMR0CNT 0x0c74 /* GP Timer 0 Count Register */
-#define SC520_GPTMR0MAXCMPA 0x0c76 /* GP Timer 0 Maxcount Compare A Register */
-#define SC520_GPTMR0MAXCMPB 0x0c78 /* GP Timer 0 Maxcount Compare B Register */
-#define SC520_GPTMR1CTL 0x0c7a /* GP Timer 1 Mode/Control Register */
-#define SC520_GPTMR1CNT 0x0c7c /* GP Timer 1 Count Register */
-#define SC520_GPTMR1MAXCMPA 0x0c7e /* GP Timer 1 Maxcount Compare Register A */
-#define SC520_GPTMR1MAXCMPB 0x0c80 /* GP Timer 1 Maxcount Compare B Register */
-#define SC520_GPTMR2CTL 0x0c82 /* GP Timer 2 Mode/Control Register */
-#define SC520_GPTMR2CNT 0x0c84 /* GP Timer 2 Count Register */
-#define SC520_GPTMR2MAXCMPA 0x0c8e /* GP Timer 2 Maxcount Compare A Register */
-#define SC520_WDTMRCTL 0x0cb0 /* Watchdog Timer Control Register */
-#define SC520_WDTMRCNTL 0x0cb2 /* Watchdog Timer Count Low Register */
-#define SC520_WDTMRCNTH 0x0cb4 /* Watchdog Timer Count High Register */
-#define SC520_UART1CTL 0x0cc0 /* UART 1 General Control Register */
-#define SC520_UART1STA 0x0cc1 /* UART 1 General Status Register */
-#define SC520_UART1FCRSHAD 0x0cc2 /* UART 1 FIFO Control Shadow Register */
-#define SC520_UART2CTL 0x0cc4 /* UART 2 General Control Register */
-#define SC520_UART2STA 0x0cc5 /* UART 2 General Status Register */
-#define SC520_UART2FCRSHAD 0x0cc6 /* UART 2 FIFO Control Shadow Register */
-#define SC520_SSICTL 0x0cd0 /* SSI Control */
-#define SC520_SSIXMIT 0x0cd1 /* SSI Transmit */
-#define SC520_SSICMD 0x0cd2 /* SSI Command */
-#define SC520_SSISTA 0x0cd3 /* SSI Status */
-#define SC520_SSIRCV 0x0cd4 /* SSI Receive */
-#define SC520_PICICR 0x0d00 /* Interrupt Control Register */
-#define SC520_MPICMODE 0x0d02 /* Master PIC Interrupt Mode Register */
-#define SC520_SL1PICMODE 0x0d03 /* Slave 1 PIC Interrupt Mode Register */
-#define SC520_SL2PICMODE 0x0d04 /* Slave 2 PIC Interrupt Mode Register */
-#define SC520_SWINT16_1 0x0d08 /* Software Interrupt 16-1 Control Register */
-#define SC520_SWINT22_17 0x0d0a /* Software Interrupt 22-17/NMI Control Register */
-#define SC520_INTPINPOL 0x0d10 /* Interrupt Pin Polarity Register */
-#define SC520_PCIHOSTMAP 0x0d14 /* PCI Host Bridge Interrupt Mappin Register */
-#define SC520_ECCMAP 0x0d18 /* ECC Interrupt Mapping Register */
-#define SC520_GPTMR0MAP 0x0d1a /* GP Timer 0 Interrupt Mapping Register */
-#define SC520_GPTMR1MAP 0x0d1b /* GP Timer 1 Interrupt Mapping Register */
-#define SC520_GPTMR2MAP 0x0d1c /* GP Timer 2 Interrupt Mapping Register */
-#define SC520_PIT0MAP 0x0d20 /* PIT0 Interrupt Mapping Register */
-#define SC520_PIT1MAP 0x0d21 /* PIT1 Interrupt Mapping Register */
-#define SC520_PIT2MAP 0x0d22 /* PIT2 Interrupt Mapping Register */
-#define SC520_UART1MAP 0x0d28 /* UART 1 Interrupt Mapping Register */
-#define SC520_UART2MAP 0x0d29 /* UART 2 Interrupt Mapping Register */
-#define SC520_PCIINTAMAP 0x0d30 /* PCI Interrupt A Mapping Register */
-#define SC520_PCIINTBMAP 0x0d31 /* PCI Interrupt B Mapping Register */
-#define SC520_PCIINTCMAP 0x0d32 /* PCI Interrupt C Mapping Register */
-#define SC520_PCIINTDMAP 0x0d33 /* PCI Interrupt D Mapping Register */
-#define SC520_DMABCINTMAP 0x0d40 /* DMA Buffer Chaining Interrupt Mapping Register */
-#define SC520_SSIMAP 0x0d41 /* SSI Interrupt Mapping Register */
-#define SC520_WDTMAP 0x0d42 /* Watchdog Timer Interrupt Mapping Register */
-#define SC520_RTCMAP 0x0d43 /* RTC Interrupt Mapping Register */
-#define SC520_WPVMAP 0x0d44 /* Write-Protect Interrupt Mapping Register */
-#define SC520_ICEMAP 0x0d45 /* AMDebug JTAG RX/TX Interrupt Mapping Register */
-#define SC520_FERRMAP 0x0d46 /* Floating Point Error Interrupt Mapping Register */
-#define SC520_GP0IMAP 0x0d50 /* GPIRQ0 Interrupt Mapping Register */
-#define SC520_GP1IMAP 0x0d51 /* GPIRQ1 Interrupt Mapping Register */
-#define SC520_GP2IMAP 0x0d52 /* GPIRQ2 Interrupt Mapping Register */
-#define SC520_GP3IMAP 0x0d53 /* GPIRQ3 Interrupt Mapping Register */
-#define SC520_GP4IMAP 0x0d54 /* GPIRQ4 Interrupt Mapping Register */
-#define SC520_GP5IMAP 0x0d55 /* GPIRQ5 Interrupt Mapping Register */
-#define SC520_GP6IMAP 0x0d56 /* GPIRQ6 Interrupt Mapping Register */
-#define SC520_GP7IMAP 0x0d57 /* GPIRQ7 Interrupt Mapping Register */
-#define SC520_GP8IMAP 0x0d58 /* GPIRQ8 Interrupt Mapping Register */
-#define SC520_GP9IMAP 0x0d59 /* GPIRQ9 Interrupt Mapping Register */
-#define SC520_GP10IMAP 0x0d5a /* GPIRQ10 Interrupt Mapping Register */
-#define SC520_SYSINFO 0x0d70 /* System Board Information Register */
-#define SC520_RESCFG 0x0d72 /* Reset Configuration Register */
-#define SC520_RESSTA 0x0d74 /* Reset Status Register */
-#define SC520_GPDMAMMIO 0x0d81 /* GP-DMA Memory-Mapped I/O Register */
-#define SC520_GPDMAEXTCHMAPA 0x0d82 /* GP-DMA Resource Channel Map A */
-#define SC520_GPDMAEXTCHMAPB 0x0d84 /* GP-DMA Resource Channel Map B */
-#define SC520_GPDMAEXTPG0 0x0d86 /* GP-DMA Channel 0 Extended Page */
-#define SC520_GPDMAEXTPG1 0x0d87 /* GP-DMA Channel 1 Extended Page */
-#define SC520_GPDMAEXTPG2 0x0d88 /* GP-DMA Channel 2 Extended Page */
-#define SC520_GPDMAEXTPG3 0x0d89 /* GP-DMA Channel 3 Extended Page */
-#define SC520_GPDMAEXTPG5 0x0d8a /* GP-DMA Channel 5 Extended Page */
-#define SC520_GPDMAEXTPG6 0x0d8b /* GP-DMA Channel 6 Extended Page */
-#define SC520_GPDMAEXTPG7 0x0d8c /* GP-DMA Channel 7 Extended Page */
-#define SC520_GPDMAEXTTC3 0x0d90 /* GP-DMA Channel 3 Extender Transfer count */
-#define SC520_GPDMAEXTTC5 0x0d91 /* GP-DMA Channel 5 Extender Transfer count */
-#define SC520_GPDMAEXTTC6 0x0d92 /* GP-DMA Channel 6 Extender Transfer count */
-#define SC520_GPDMAEXTTC7 0x0d93 /* GP-DMA Channel 7 Extender Transfer count */
-#define SC520_GPDMABCCTL 0x0d98 /* Buffer Chaining Control */
-#define SC520_GPDMABCSTA 0x0d99 /* Buffer Chaining Status */
-#define SC520_GPDMABSINTENB 0x0d9a /* Buffer Chaining Interrupt Enable */
-#define SC520_GPDMABCVAL 0x0d9b /* Buffer Chaining Valid */
-#define SC520_GPDMANXTADDL3 0x0da0 /* GP-DMA Channel 3 Next Address Low */
-#define SC520_GPDMANXTADDH3 0x0da2 /* GP-DMA Channel 3 Next Address High */
-#define SC520_GPDMANXTADDL5 0x0da4 /* GP-DMA Channel 5 Next Address Low */
-#define SC520_GPDMANXTADDH5 0x0da6 /* GP-DMA Channel 5 Next Address High */
-#define SC520_GPDMANXTADDL6 0x0da8 /* GP-DMA Channel 6 Next Address Low */
-#define SC520_GPDMANXTADDH6 0x0daa /* GP-DMA Channel 6 Next Address High */
-#define SC520_GPDMANXTADDL7 0x0dac /* GP-DMA Channel 7 Next Address Low */
-#define SC520_GPDMANXTADDH7 0x0dae /* GP-DMA Channel 7 Next Address High */
-#define SC520_GPDMANXTTCL3 0x0db0 /* GP-DMA Channel 3 Next Transfer Count Low */
-#define SC520_GPDMANXTTCH3 0x0db2 /* GP-DMA Channel 3 Next Transfer Count High */
-#define SC520_GPDMANXTTCL5 0x0db4 /* GP-DMA Channel 5 Next Transfer Count Low */
-#define SC520_GPDMANXTTCH5 0x0db6 /* GP-DMA Channel 5 Next Transfer Count High */
-#define SC520_GPDMANXTTCL6 0x0db8 /* GP-DMA Channel 6 Next Transfer Count Low */
-#define SC520_GPDMANXTTCH6 0x0dba /* GP-DMA Channel 6 Next Transfer Count High */
-#define SC520_GPDMANXTTCL7 0x0dbc /* GP-DMA Channel 7 Next Transfer Count Low */
-#define SC520_GPDMANXTTCH7 0x0dbe /* GP-DMA Channel 7 Next Transfer Count High */
+#define SC520_REVID 0x0000 /* ElanSC520 Microcontroller Revision ID Register */
+#define SC520_CPUCTL 0x0002 /* Am5x86 CPU Control Register */
+#define SC520_DRCCTL 0x0010 /* SDRAM Control Register */
+#define SC520_DRCTMCTL 0x0012 /* SDRAM Timing Control Register */
+#define SC520_DRCCFG 0x0014 /* SDRAM Bank Configuration Register*/
+#define SC520_DRCBENDADR 0x0018 /* SDRAM Bank 0-3 Ending Address Register*/
+#define SC520_ECCCTL 0x0020 /* ECC Control Register */
+#define SC520_ECCSTA 0x0021 /* ECC Status Register */
+#define SC520_ECCCKBPOS 0x0022 /* ECC Check Bit Position Register */
+#define SC520_ECCSBADD 0x0024 /* ECC Single-Bit Error Address Register */
+#define SC520_DBCTL 0x0040 /* SDRAM Buffer Control Register */
+#define SC520_BOOTCSCTL 0x0050 /* /BOOTCS Control Register */
+#define SC520_ROMCS1CTL 0x0054 /* /ROMCS1 Control Register */
+#define SC520_ROMCS2CTL 0x0056 /* /ROMCS2 Control Register */
+#define SC520_HBCTL 0x0060 /* Host Bridge Control Register */
+#define SC520_HBTGTIRQCTL 0x0062 /* Host Bridge Target Interrupt Control Register */
+#define SC520_HBTGTIRQSTA 0x0064 /* Host Bridge Target Interrupt Status Register */
+#define SC520_HBMSTIRQCTL 0x0066 /* Host Bridge Target Interrupt Control Register */
+#define SC520_HBMSTIRQSTA 0x0068 /* Host Bridge Master Interrupt Status Register */
+#define SC520_MSTINTADD 0x006c /* Host Bridge Master Interrupt Address Register */
+#define SC520_SYSARBCTL 0x0070 /* System Arbiter Control Register */
+#define SC520_PCIARBSTA 0x0071 /* PCI Bus Arbiter Status Register */
+#define SC520_SYSARBMENB 0x0072 /* System Arbiter Master Enable Register */
+#define SC520_ARBPRICTL 0x0074 /* Arbiter Priority Control Register */
+#define SC520_ADDDECCTL 0x0080 /* Address Decode Control Register */
+#define SC520_WPVSTA 0x0082 /* Write-Protect Violation Status Register */
+#define SC520_PAR0 0x0088 /* Programmable Address Region 0 Register */
+#define SC520_PAR1 0x008c /* Programmable Address Region 1 Register */
+#define SC520_PAR2 0x0090 /* Programmable Address Region 2 Register */
+#define SC520_PAR3 0x0094 /* Programmable Address Region 3 Register */
+#define SC520_PAR4 0x0098 /* Programmable Address Region 4 Register */
+#define SC520_PAR5 0x009c /* Programmable Address Region 5 Register */
+#define SC520_PAR6 0x00a0 /* Programmable Address Region 6 Register */
+#define SC520_PAR7 0x00a4 /* Programmable Address Region 7 Register */
+#define SC520_PAR8 0x00a8 /* Programmable Address Region 8 Register */
+#define SC520_PAR9 0x00ac /* Programmable Address Region 9 Register */
+#define SC520_PAR10 0x00b0 /* Programmable Address Region 10 Register */
+#define SC520_PAR11 0x00b4 /* Programmable Address Region 11 Register */
+#define SC520_PAR12 0x00b8 /* Programmable Address Region 12 Register */
+#define SC520_PAR13 0x00bc /* Programmable Address Region 13 Register */
+#define SC520_PAR14 0x00c0 /* Programmable Address Region 14 Register */
+#define SC520_PAR15 0x00c4 /* Programmable Address Region 15 Register */
+#define SC520_GPECHO 0x0c00 /* GP Echo Mode Register */
+#define SC520_GPCSDW 0x0c01 /* GP Chip Select Data Width Register */
+#define SC520_GPCSQUAL 0x0c02 /* GP Chip Select Qualification Register */
+#define SC520_GPCSRT 0x0c08 /* GP Chip Select Recovery Time Register */
+#define SC520_GPCSPW 0x0c09 /* GP Chip Select Pulse Width Register */
+#define SC520_GPCSOFF 0x0c0a /* GP Chip Select Offset Register */
+#define SC520_GPRDW 0x0c0b /* GP Read Pulse Width Register */
+#define SC520_GPRDOFF 0x0c0c /* GP Read Offset Register */
+#define SC520_GPWRW 0x0c0d /* GP Write Pulse Width Register */
+#define SC520_GPWROFF 0x0c0e /* GP Write Offset Register */
+#define SC520_GPALEW 0x0c0f /* GP ALE Pulse Width Register */
+#define SC520_GPALEOFF 0x0c10 /* GP ALE Offset Register */
+#define SC520_PIOPFS15_0 0x0c20 /* PIO15-PIO0 Pin Function Select */
+#define SC520_PIOPFS31_16 0x0c22 /* PIO31-PIO16 Pin Function Select */
+#define SC520_CSPFS 0x0c24 /* Chip Select Pin Function Select */
+#define SC520_CLKSEL 0x0c26 /* Clock Select */
+#define SC520_DSCTL 0x0c28 /* Drive Strength Control */
+#define SC520_PIODIR15_0 0x0c2a /* PIO15-PIO0 Direction */
+#define SC520_PIODIR31_16 0x0c2c /* PIO31-PIO16 Direction */
+#define SC520_PIODATA15_0 0x0c30 /* PIO15-PIO0 Data */
+#define SC520_PIODATA31_16 0x0c32 /* PIO31-PIO16 Data */
+#define SC520_PIOSET15_0 0x0c34 /* PIO15-PIO0 Set */
+#define SC520_PIOSET31_16 0x0c36 /* PIO31-PIO16 Set */
+#define SC520_PIOCLR15_0 0x0c38 /* PIO15-PIO0 Clear */
+#define SC520_PIOCLR31_16 0x0c3a /* PIO31-PIO16 Clear */
+#define SC520_SWTMRMILLI 0x0c60 /* Software Timer Millisecond Count */
+#define SC520_SWTMRMICRO 0x0c62 /* Software Timer Microsecond Count */
+#define SC520_SWTMRCFG 0x0c64 /* Software Timer Configuration */
+#define SC520_GPTMRSTA 0x0c70 /* GP Timers Status Register */
+#define SC520_GPTMR0CTL 0x0c72 /* GP Timer 0 Mode/Control Register */
+#define SC520_GPTMR0CNT 0x0c74 /* GP Timer 0 Count Register */
+#define SC520_GPTMR0MAXCMPA 0x0c76 /* GP Timer 0 Maxcount Compare A Register */
+#define SC520_GPTMR0MAXCMPB 0x0c78 /* GP Timer 0 Maxcount Compare B Register */
+#define SC520_GPTMR1CTL 0x0c7a /* GP Timer 1 Mode/Control Register */
+#define SC520_GPTMR1CNT 0x0c7c /* GP Timer 1 Count Register */
+#define SC520_GPTMR1MAXCMPA 0x0c7e /* GP Timer 1 Maxcount Compare Register A */
+#define SC520_GPTMR1MAXCMPB 0x0c80 /* GP Timer 1 Maxcount Compare B Register */
+#define SC520_GPTMR2CTL 0x0c82 /* GP Timer 2 Mode/Control Register */
+#define SC520_GPTMR2CNT 0x0c84 /* GP Timer 2 Count Register */
+#define SC520_GPTMR2MAXCMPA 0x0c8e /* GP Timer 2 Maxcount Compare A Register */
+#define SC520_WDTMRCTL 0x0cb0 /* Watchdog Timer Control Register */
+#define SC520_WDTMRCNTL 0x0cb2 /* Watchdog Timer Count Low Register */
+#define SC520_WDTMRCNTH 0x0cb4 /* Watchdog Timer Count High Register */
+#define SC520_UART1CTL 0x0cc0 /* UART 1 General Control Register */
+#define SC520_UART1STA 0x0cc1 /* UART 1 General Status Register */
+#define SC520_UART1FCRSHAD 0x0cc2 /* UART 1 FIFO Control Shadow Register */
+#define SC520_UART2CTL 0x0cc4 /* UART 2 General Control Register */
+#define SC520_UART2STA 0x0cc5 /* UART 2 General Status Register */
+#define SC520_UART2FCRSHAD 0x0cc6 /* UART 2 FIFO Control Shadow Register */
+#define SC520_SSICTL 0x0cd0 /* SSI Control */
+#define SC520_SSIXMIT 0x0cd1 /* SSI Transmit */
+#define SC520_SSICMD 0x0cd2 /* SSI Command */
+#define SC520_SSISTA 0x0cd3 /* SSI Status */
+#define SC520_SSIRCV 0x0cd4 /* SSI Receive */
+#define SC520_PICICR 0x0d00 /* Interrupt Control Register */
+#define SC520_MPICMODE 0x0d02 /* Master PIC Interrupt Mode Register */
+#define SC520_SL1PICMODE 0x0d03 /* Slave 1 PIC Interrupt Mode Register */
+#define SC520_SL2PICMODE 0x0d04 /* Slave 2 PIC Interrupt Mode Register */
+#define SC520_SWINT16_1 0x0d08 /* Software Interrupt 16-1 Control Register */
+#define SC520_SWINT22_17 0x0d0a /* Software Interrupt 22-17/NMI Control Register */
+#define SC520_INTPINPOL 0x0d10 /* Interrupt Pin Polarity Register */
+#define SC520_PCIHOSTMAP 0x0d14 /* PCI Host Bridge Interrupt Mappin Register */
+#define SC520_ECCMAP 0x0d18 /* ECC Interrupt Mapping Register */
+#define SC520_GPTMR0MAP 0x0d1a /* GP Timer 0 Interrupt Mapping Register */
+#define SC520_GPTMR1MAP 0x0d1b /* GP Timer 1 Interrupt Mapping Register */
+#define SC520_GPTMR2MAP 0x0d1c /* GP Timer 2 Interrupt Mapping Register */
+#define SC520_PIT0MAP 0x0d20 /* PIT0 Interrupt Mapping Register */
+#define SC520_PIT1MAP 0x0d21 /* PIT1 Interrupt Mapping Register */
+#define SC520_PIT2MAP 0x0d22 /* PIT2 Interrupt Mapping Register */
+#define SC520_UART1MAP 0x0d28 /* UART 1 Interrupt Mapping Register */
+#define SC520_UART2MAP 0x0d29 /* UART 2 Interrupt Mapping Register */
+#define SC520_PCIINTAMAP 0x0d30 /* PCI Interrupt A Mapping Register */
+#define SC520_PCIINTBMAP 0x0d31 /* PCI Interrupt B Mapping Register */
+#define SC520_PCIINTCMAP 0x0d32 /* PCI Interrupt C Mapping Register */
+#define SC520_PCIINTDMAP 0x0d33 /* PCI Interrupt D Mapping Register */
+#define SC520_DMABCINTMAP 0x0d40 /* DMA Buffer Chaining Interrupt Mapping Register */
+#define SC520_SSIMAP 0x0d41 /* SSI Interrupt Mapping Register */
+#define SC520_WDTMAP 0x0d42 /* Watchdog Timer Interrupt Mapping Register */
+#define SC520_RTCMAP 0x0d43 /* RTC Interrupt Mapping Register */
+#define SC520_WPVMAP 0x0d44 /* Write-Protect Interrupt Mapping Register */
+#define SC520_ICEMAP 0x0d45 /* AMDebug JTAG RX/TX Interrupt Mapping Register */
+#define SC520_FERRMAP 0x0d46 /* Floating Point Error Interrupt Mapping Register */
+#define SC520_GP0IMAP 0x0d50 /* GPIRQ0 Interrupt Mapping Register */
+#define SC520_GP1IMAP 0x0d51 /* GPIRQ1 Interrupt Mapping Register */
+#define SC520_GP2IMAP 0x0d52 /* GPIRQ2 Interrupt Mapping Register */
+#define SC520_GP3IMAP 0x0d53 /* GPIRQ3 Interrupt Mapping Register */
+#define SC520_GP4IMAP 0x0d54 /* GPIRQ4 Interrupt Mapping Register */
+#define SC520_GP5IMAP 0x0d55 /* GPIRQ5 Interrupt Mapping Register */
+#define SC520_GP6IMAP 0x0d56 /* GPIRQ6 Interrupt Mapping Register */
+#define SC520_GP7IMAP 0x0d57 /* GPIRQ7 Interrupt Mapping Register */
+#define SC520_GP8IMAP 0x0d58 /* GPIRQ8 Interrupt Mapping Register */
+#define SC520_GP9IMAP 0x0d59 /* GPIRQ9 Interrupt Mapping Register */
+#define SC520_GP10IMAP 0x0d5a /* GPIRQ10 Interrupt Mapping Register */
+#define SC520_SYSINFO 0x0d70 /* System Board Information Register */
+#define SC520_RESCFG 0x0d72 /* Reset Configuration Register */
+#define SC520_RESSTA 0x0d74 /* Reset Status Register */
+#define SC520_GPDMAMMIO 0x0d81 /* GP-DMA Memory-Mapped I/O Register */
+#define SC520_GPDMAEXTCHMAPA 0x0d82 /* GP-DMA Resource Channel Map A */
+#define SC520_GPDMAEXTCHMAPB 0x0d84 /* GP-DMA Resource Channel Map B */
+#define SC520_GPDMAEXTPG0 0x0d86 /* GP-DMA Channel 0 Extended Page */
+#define SC520_GPDMAEXTPG1 0x0d87 /* GP-DMA Channel 1 Extended Page */
+#define SC520_GPDMAEXTPG2 0x0d88 /* GP-DMA Channel 2 Extended Page */
+#define SC520_GPDMAEXTPG3 0x0d89 /* GP-DMA Channel 3 Extended Page */
+#define SC520_GPDMAEXTPG5 0x0d8a /* GP-DMA Channel 5 Extended Page */
+#define SC520_GPDMAEXTPG6 0x0d8b /* GP-DMA Channel 6 Extended Page */
+#define SC520_GPDMAEXTPG7 0x0d8c /* GP-DMA Channel 7 Extended Page */
+#define SC520_GPDMAEXTTC3 0x0d90 /* GP-DMA Channel 3 Extender Transfer count */
+#define SC520_GPDMAEXTTC5 0x0d91 /* GP-DMA Channel 5 Extender Transfer count */
+#define SC520_GPDMAEXTTC6 0x0d92 /* GP-DMA Channel 6 Extender Transfer count */
+#define SC520_GPDMAEXTTC7 0x0d93 /* GP-DMA Channel 7 Extender Transfer count */
+#define SC520_GPDMABCCTL 0x0d98 /* Buffer Chaining Control */
+#define SC520_GPDMABCSTA 0x0d99 /* Buffer Chaining Status */
+#define SC520_GPDMABSINTENB 0x0d9a /* Buffer Chaining Interrupt Enable */
+#define SC520_GPDMABCVAL 0x0d9b /* Buffer Chaining Valid */
+#define SC520_GPDMANXTADDL3 0x0da0 /* GP-DMA Channel 3 Next Address Low */
+#define SC520_GPDMANXTADDH3 0x0da2 /* GP-DMA Channel 3 Next Address High */
+#define SC520_GPDMANXTADDL5 0x0da4 /* GP-DMA Channel 5 Next Address Low */
+#define SC520_GPDMANXTADDH5 0x0da6 /* GP-DMA Channel 5 Next Address High */
+#define SC520_GPDMANXTADDL6 0x0da8 /* GP-DMA Channel 6 Next Address Low */
+#define SC520_GPDMANXTADDH6 0x0daa /* GP-DMA Channel 6 Next Address High */
+#define SC520_GPDMANXTADDL7 0x0dac /* GP-DMA Channel 7 Next Address Low */
+#define SC520_GPDMANXTADDH7 0x0dae /* GP-DMA Channel 7 Next Address High */
+#define SC520_GPDMANXTTCL3 0x0db0 /* GP-DMA Channel 3 Next Transfer Count Low */
+#define SC520_GPDMANXTTCH3 0x0db2 /* GP-DMA Channel 3 Next Transfer Count High */
+#define SC520_GPDMANXTTCL5 0x0db4 /* GP-DMA Channel 5 Next Transfer Count Low */
+#define SC520_GPDMANXTTCH5 0x0db6 /* GP-DMA Channel 5 Next Transfer Count High */
+#define SC520_GPDMANXTTCL6 0x0db8 /* GP-DMA Channel 6 Next Transfer Count Low */
+#define SC520_GPDMANXTTCH6 0x0dba /* GP-DMA Channel 6 Next Transfer Count High */
+#define SC520_GPDMANXTTCL7 0x0dbc /* GP-DMA Channel 7 Next Transfer Count Low */
+#define SC520_GPDMANXTTCH7 0x0dbe /* GP-DMA Channel 7 Next Transfer Count High */
/* MMCR Register bits (not all of them :) ) */
/* SSI Stuff */
-#define CTL_CLK_SEL_4 0x00 /* Nominal Bit Rate = 8 MHz */
-#define CTL_CLK_SEL_8 0x10 /* Nominal Bit Rate = 4 MHz */
-#define CTL_CLK_SEL_16 0x20 /* Nominal Bit Rate = 2 MHz */
-#define CTL_CLK_SEL_32 0x30 /* Nominal Bit Rate = 1 MHz */
-#define CTL_CLK_SEL_64 0x40 /* Nominal Bit Rate = 512 KHz */
-#define CTL_CLK_SEL_128 0x50 /* Nominal Bit Rate = 256 KHz */
-#define CTL_CLK_SEL_256 0x60 /* Nominal Bit Rate = 128 KHz */
-#define CTL_CLK_SEL_512 0x70 /* Nominal Bit Rate = 64 KHz */
+#define CTL_CLK_SEL_4 0x00 /* Nominal Bit Rate = 8 MHz */
+#define CTL_CLK_SEL_8 0x10 /* Nominal Bit Rate = 4 MHz */
+#define CTL_CLK_SEL_16 0x20 /* Nominal Bit Rate = 2 MHz */
+#define CTL_CLK_SEL_32 0x30 /* Nominal Bit Rate = 1 MHz */
+#define CTL_CLK_SEL_64 0x40 /* Nominal Bit Rate = 512 KHz */
+#define CTL_CLK_SEL_128 0x50 /* Nominal Bit Rate = 256 KHz */
+#define CTL_CLK_SEL_256 0x60 /* Nominal Bit Rate = 128 KHz */
+#define CTL_CLK_SEL_512 0x70 /* Nominal Bit Rate = 64 KHz */
-#define TC_INT_ENB 0x08 /* Transaction Complete Interrupt Enable */
-#define PHS_INV_ENB 0x04 /* SSI Inverted Phase Mode Enable */
-#define CLK_INV_ENB 0x02 /* SSI Inverted Clock Mode Enable */
-#define MSBF_ENB 0x01 /* SSI Most Significant Bit First Mode Enable */
+#define TC_INT_ENB 0x08 /* Transaction Complete Interrupt Enable */
+#define PHS_INV_ENB 0x04 /* SSI Inverted Phase Mode Enable */
+#define CLK_INV_ENB 0x02 /* SSI Inverted Clock Mode Enable */
+#define MSBF_ENB 0x01 /* SSI Most Significant Bit First Mode Enable */
-#define SSICMD_CMD_SEL_XMITRCV 0x03 /* Simultaneous Transmit / Receive Transaction */
-#define SSICMD_CMD_SEL_RCV 0x02 /* Receive Transaction */
-#define SSICMD_CMD_SEL_XMIT 0x01 /* Transmit Transaction */
-#define SSISTA_BSY 0x02 /* SSI Busy */
-#define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */
+#define SSICMD_CMD_SEL_XMITRCV 0x03 /* Simultaneous Transmit / Receive Transaction */
+#define SSICMD_CMD_SEL_RCV 0x02 /* Receive Transaction */
+#define SSICMD_CMD_SEL_XMIT 0x01 /* Transmit Transaction */
+#define SSISTA_BSY 0x02 /* SSI Busy */
+#define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */
/* BITS for SC520_ADDDECCTL: */
-#define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */
-#define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */
-#define RTC_DIS 0x04 /* RTC Disable */
-#define UART2_DIS 0x02 /* UART2 Disable */
-#define UART1_DIS 0x01 /* UART1 Disable */
+#define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */
+#define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */
+#define RTC_DIS 0x04 /* RTC Disable */
+#define UART2_DIS 0x02 /* UART2 Disable */
+#define UART1_DIS 0x01 /* UART1 Disable */
/* bus mapping constants (used for PCI core initialization) */ /* bus mapping constants */
#define SC520_REG_ADDR 0x00000cf8
@@ -256,7 +256,7 @@
/* PCI bus memory from 0x10000000 to 0x26ffffff
* (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */
#define SC520_PCI_MEM_PHYS 0x10000000
-#define SC520_PCI_MEM_BUS 0x10000000
+#define SC520_PCI_MEM_BUS 0x10000000
#define SC520_PCI_MEM_SIZE 0x17000000
/* 0x28000000 - 0x3fffffff is used by the flash banks */
diff --git a/include/asm-m68k/m5249.h b/include/asm-m68k/m5249.h
index 5ed3cbc..facf0c9 100644
--- a/include/asm-m68k/m5249.h
+++ b/include/asm-m68k/m5249.h
@@ -58,7 +58,7 @@
#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w) */
#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
-#define MCFSIM_MPARK 0x0c /* Bus master park register (r/w) */
+#define MCFSIM_MPARK 0x0c /* Bus master park register (r/w) */
#define MCFSIM_SIMR 0x00 /* SIM Config reg (r/w) */
#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h
index 7473bb9..f6a6b04 100644
--- a/include/asm-m68k/m5282.h
+++ b/include/asm-m68k/m5282.h
@@ -382,15 +382,15 @@
#define MCFCCM_CIR (*(vu_short *)(CFG_MBAR+0x0011000A))
/* Bit level definitions and macros */
-#define MCFCCM_CCR_LOAD (0x8000)
-#define MCFCCM_CCR_MODE(x) (((x)&0x0007)<<8)
-#define MCFCCM_CCR_SZEN (0x0040)
-#define MCFCCM_CCR_PSTEN (0x0020)
-#define MCFCCM_CCR_BME (0x0008)
-#define MCFCCM_CCR_BMT(x) (((x)&0x0007))
+#define MCFCCM_CCR_LOAD (0x8000)
+#define MCFCCM_CCR_MODE(x) (((x)&0x0007)<<8)
+#define MCFCCM_CCR_SZEN (0x0040)
+#define MCFCCM_CCR_PSTEN (0x0020)
+#define MCFCCM_CCR_BME (0x0008)
+#define MCFCCM_CCR_BMT(x) (((x)&0x0007))
-#define MCFCCM_CIR_PIN_MASK (0xFF00)
-#define MCFCCM_CIR_PRN_MASK (0x00FF)
+#define MCFCCM_CIR_PIN_MASK (0xFF00)
+#define MCFCCM_CIR_PRN_MASK (0x00FF)
/* Clock Module */
@@ -554,7 +554,7 @@
#define MCFGPT_GPTIE_C1I (0x02)
#define MCFGPT_GPTIE_C0I (0x01)
-#define MCFGPT_GPTSCR2_TOI (0x80)
+#define MCFGPT_GPTSCR2_TOI (0x80)
#define MCFGPT_GPTSCR2_PUPT (0x20)
#define MCFGPT_GPTSCR2_RDPT (0x10)
#define MCFGPT_GPTSCR2_TCRE (0x08)
diff --git a/include/asm-microblaze/asm.h b/include/asm-microblaze/asm.h
index f10f89c..deb23e0 100644
--- a/include/asm-microblaze/asm.h
+++ b/include/asm-microblaze/asm.h
@@ -74,7 +74,7 @@
{ \
register unsigned tmp; \
__asm__ __volatile__ (" \
- mfs %0, rmsr; \
+ mfs %0, rmsr; \
ori %0, %0, "#val"; \
mts rmsr, %0; \
nop;" \
@@ -87,7 +87,7 @@
{ \
register unsigned tmp; \
__asm__ __volatile__ (" \
- mfs %0, rmsr; \
+ mfs %0, rmsr; \
andi %0, %0, ~"#val"; \
mts rmsr, %0; \
nop;" \
diff --git a/include/asm-mips/au1x00.h b/include/asm-mips/au1x00.h
index a4e9947..6a33197 100644
--- a/include/asm-mips/au1x00.h
+++ b/include/asm-mips/au1x00.h
@@ -5,7 +5,7 @@
*
* Copyright 2000,2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/include/asm-mips/cacheops.h b/include/asm-mips/cacheops.h
index 256ad2c..70bcad7 100644
--- a/include/asm-mips/cacheops.h
+++ b/include/asm-mips/cacheops.h
@@ -21,7 +21,7 @@
#define Index_Store_Tag_I 0x08
#define Index_Store_Tag_D 0x09
#if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I 0x00
+#define Hit_Invalidate_I 0x00
#else
#define Hit_Invalidate_I 0x10
#endif
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 0586c53d..61a0dac 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -283,7 +283,7 @@ set_cp0_##name(unsigned int set) \
\
res = read_32bit_cp0_register(register); \
res |= set; \
- write_32bit_cp0_register(register, res); \
+ write_32bit_cp0_register(register, res); \
\
return res; \
} \
@@ -332,7 +332,7 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
# define KSU_KERNEL 0x00000000
#define ST0_UX 0x00000020
#define ST0_SX 0x00000040
-#define ST0_KX 0x00000080
+#define ST0_KX 0x00000080
#define ST0_DE 0x00010000
#define ST0_CE 0x00020000
@@ -362,22 +362,22 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
*/
#define TX39_CONF_ICS_SHIFT 19
#define TX39_CONF_ICS_MASK 0x00380000
-#define TX39_CONF_ICS_1KB 0x00000000
-#define TX39_CONF_ICS_2KB 0x00080000
-#define TX39_CONF_ICS_4KB 0x00100000
-#define TX39_CONF_ICS_8KB 0x00180000
-#define TX39_CONF_ICS_16KB 0x00200000
+#define TX39_CONF_ICS_1KB 0x00000000
+#define TX39_CONF_ICS_2KB 0x00080000
+#define TX39_CONF_ICS_4KB 0x00100000
+#define TX39_CONF_ICS_8KB 0x00180000
+#define TX39_CONF_ICS_16KB 0x00200000
#define TX39_CONF_DCS_SHIFT 16
#define TX39_CONF_DCS_MASK 0x00070000
-#define TX39_CONF_DCS_1KB 0x00000000
-#define TX39_CONF_DCS_2KB 0x00010000
-#define TX39_CONF_DCS_4KB 0x00020000
-#define TX39_CONF_DCS_8KB 0x00030000
-#define TX39_CONF_DCS_16KB 0x00040000
-
-#define TX39_CONF_CWFON 0x00004000
-#define TX39_CONF_WBON 0x00002000
+#define TX39_CONF_DCS_1KB 0x00000000
+#define TX39_CONF_DCS_2KB 0x00010000
+#define TX39_CONF_DCS_4KB 0x00020000
+#define TX39_CONF_DCS_8KB 0x00030000
+#define TX39_CONF_DCS_16KB 0x00040000
+
+#define TX39_CONF_CWFON 0x00004000
+#define TX39_CONF_WBON 0x00002000
#define TX39_CONF_RF_SHIFT 10
#define TX39_CONF_RF_MASK 0x00000c00
#define TX39_CONF_DOZE 0x00000200
diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h
index 12a0bd9..8b78806 100644
--- a/include/asm-nios/io.h
+++ b/include/asm-nios/io.h
@@ -34,21 +34,21 @@
#define readb(addr)\
({unsigned char val;\
asm volatile( " pfxio 0 \n"\
- " ld %0, [%1] \n"\
+ " ld %0, [%1] \n"\
" ext8d %0, %1 \n"\
:"=r"(val) : "r" (addr)); val;})
#define readw(addr)\
({unsigned short val;\
asm volatile( " pfxio 0 \n"\
- " ld %0, [%1] \n"\
+ " ld %0, [%1] \n"\
" ext16d %0, %1 \n"\
:"=r"(val) : "r" (addr)); val;})
#define readl(addr)\
({unsigned long val;\
asm volatile( " pfxio 0 \n"\
- " ld %0, [%1] \n"\
+ " ld %0, [%1] \n"\
:"=r"(val) : "r" (addr)); val;})
#define writeb(addr,val)\
diff --git a/include/asm-ppc/4xx_pci.h b/include/asm-ppc/4xx_pci.h
index 3c1adec..30125a1 100644
--- a/include/asm-ppc/4xx_pci.h
+++ b/include/asm-ppc/4xx_pci.h
@@ -47,6 +47,6 @@
#define PTM2MS 0xEF400038
#define PTM2LA 0xEF40003C
-#define PCIDEVID_405GP 0x0
+#define PCIDEVID_405GP 0x0
#endif
diff --git a/include/asm-ppc/5xx_immap.h b/include/asm-ppc/5xx_immap.h
index 8e57057..72cbab4 100644
--- a/include/asm-ppc/5xx_immap.h
+++ b/include/asm-ppc/5xx_immap.h
@@ -408,31 +408,31 @@ typedef struct uimb {
/* Internal Memory Map MPC555
*/
typedef struct immap {
- char res1[262144]; /* CMF Flash A 256 Kbytes */
- char res2[196608]; /* CMF Flash B 192 Kbytes */
- char res3[2670592]; /* Reserved for Flash */
- sysconf5xx_t im_siu_conf; /* SIU Configuration */
+ char res1[262144]; /* CMF Flash A 256 Kbytes */
+ char res2[196608]; /* CMF Flash B 192 Kbytes */
+ char res3[2670592]; /* Reserved for Flash */
+ sysconf5xx_t im_siu_conf; /* SIU Configuration */
memctl5xx_t im_memctl; /* Memory Controller */
sit5xx_t im_sit; /* System Integration Timers */
car5xx_t im_clkrst; /* Clocks and Reset */
- sitk5xx_t im_sitk; /* System Integration Timer Keys*/
- cark8xx_t im_clkrstk; /* Clocks and Resert Keys */
+ sitk5xx_t im_sitk; /* System Integration Timer Keys*/
+ cark8xx_t im_clkrstk; /* Clocks and Resert Keys */
fl5xx_t im_fla; /* Flash Module A */
fl5xx_t im_flb; /* Flash Module B */
- char res4[14208]; /* Reserved for SIU */
- dprc5xx_t im_dprc; /* Dpram Control Register */
- char res5[8180]; /* Reserved */
- char dptram[6144]; /* Dptram */
- char res6[2048]; /* Reserved */
+ char res4[14208]; /* Reserved for SIU */
+ dprc5xx_t im_dprc; /* Dpram Control Register */
+ char res5[8180]; /* Reserved */
+ char dptram[6144]; /* Dptram */
+ char res6[2048]; /* Reserved */
tpu5xx_t im_tpua; /* Time Proessing Unit A */
- tpu5xx_t im_tpub; /* Time Processing Unit B */
- qadc5xx_t im_qadca; /* QADC A */
- qadc5xx_t im_qadcb; /* QADC B */
+ tpu5xx_t im_tpub; /* Time Processing Unit B */
+ qadc5xx_t im_qadca; /* QADC A */
+ qadc5xx_t im_qadcb; /* QADC B */
qsmcm5xx_t im_qsmcm; /* SCI and SPI */
- mios5xx_t im_mios; /* MIOS */
- tcan5xx_t im_tcana; /* Toucan A */
- tcan5xx_t im_tcanb; /* Toucan B */
- char res7[1792]; /* Reserved */
+ mios5xx_t im_mios; /* MIOS */
+ tcan5xx_t im_tcana; /* Toucan A */
+ tcan5xx_t im_tcanb; /* Toucan B */
+ char res7[1792]; /* Reserved */
uimb5xx_t im_uimb; /* UIMB */
} immap_t;
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index de82399..05db0de 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -16,59 +16,59 @@
*/
/* #define HID0 1008 already defined in processor.h */
-#define HID0_MASK_MACHINE_CHECK 0x00000000
-#define HID0_ENABLE_MACHINE_CHECK 0x80000000
+#define HID0_MASK_MACHINE_CHECK 0x00000000
+#define HID0_ENABLE_MACHINE_CHECK 0x80000000
-#define HID0_DISABLE_CACHE_PARITY 0x00000000
-#define HID0_ENABLE_CACHE_PARITY 0x40000000
+#define HID0_DISABLE_CACHE_PARITY 0x00000000
+#define HID0_ENABLE_CACHE_PARITY 0x40000000
-#define HID0_DISABLE_ADDRESS_PARITY 0x00000000 /* on mpc8349ads must be disabled */
-#define HID0_ENABLE_ADDRESS_PARITY 0x20000000
+#define HID0_DISABLE_ADDRESS_PARITY 0x00000000 /* on mpc8349ads must be disabled */
+#define HID0_ENABLE_ADDRESS_PARITY 0x20000000
-#define HID0_DISABLE_DATA_PARITY 0x00000000 /* on mpc8349ads must be disabled */
-#define HID0_ENABLE_DATE_PARITY 0x10000000
+#define HID0_DISABLE_DATA_PARITY 0x00000000 /* on mpc8349ads must be disabled */
+#define HID0_ENABLE_DATE_PARITY 0x10000000
-#define HID0_CORE_CLK_OUT 0x00000000
-#define HID0_CORE_CLK_OUT_DIV_2 0x08000000
+#define HID0_CORE_CLK_OUT 0x00000000
+#define HID0_CORE_CLK_OUT_DIV_2 0x08000000
#define HID0_ENABLE_ARTRY_OUT_PRECHARGE 0x00000000 /* on mpc8349ads must be enabled */
#define HID0_DISABLE_ARTRY_OUT_PRECHARGE 0x01000000
-#define HID0_DISABLE_DOSE_MODE 0x00000000
-#define HID0_ENABLE_DOSE_MODE 0x00800000
+#define HID0_DISABLE_DOSE_MODE 0x00000000
+#define HID0_ENABLE_DOSE_MODE 0x00800000
-#define HID0_DISABLE_NAP_MODE 0x00000000
-#define HID0_ENABLE_NAP_MODE 0x00400000
+#define HID0_DISABLE_NAP_MODE 0x00000000
+#define HID0_ENABLE_NAP_MODE 0x00400000
-#define HID0_DISABLE_SLEEP_MODE 0x00000000
-#define HID0_ENABLE_SLEEP_MODE 0x00200000
+#define HID0_DISABLE_SLEEP_MODE 0x00000000
+#define HID0_ENABLE_SLEEP_MODE 0x00200000
#define HID0_DISABLE_DYNAMIC_POWER_MANAGMENT 0x00000000
#define HID0_ENABLE_DYNAMIC_POWER_MANAGMENT 0x00100000
-#define HID0_SOFT_RESET 0x00010000
+#define HID0_SOFT_RESET 0x00010000
-#define HID0_DISABLE_INSTRUCTION_CACHE 0x00000000
-#define HID0_ENABLE_INSTRUCTION_CACHE 0x00008000
+#define HID0_DISABLE_INSTRUCTION_CACHE 0x00000000
+#define HID0_ENABLE_INSTRUCTION_CACHE 0x00008000
-#define HID0_DISABLE_DATA_CACHE 0x00000000
-#define HID0_ENABLE_DATA_CACHE 0x00004000
+#define HID0_DISABLE_DATA_CACHE 0x00000000
+#define HID0_ENABLE_DATA_CACHE 0x00004000
-#define HID0_LOCK_INSTRUCTION_CACHE 0x00002000
+#define HID0_LOCK_INSTRUCTION_CACHE 0x00002000
-#define HID0_LOCK_DATA_CACHE 0x00001000
+#define HID0_LOCK_DATA_CACHE 0x00001000
#define HID0_INVALIDATE_INSTRUCTION_CACHE 0x00000800
-#define HID0_INVALIDATE_DATA_CACHE 0x00000400
+#define HID0_INVALIDATE_DATA_CACHE 0x00000400
-#define HID0_DISABLE_M_BIT 0x00000000
-#define HID0_ENABLE_M_BIT 0x00000080
+#define HID0_DISABLE_M_BIT 0x00000000
+#define HID0_ENABLE_M_BIT 0x00000080
-#define HID0_FBIOB 0x00000010
+#define HID0_FBIOB 0x00000010
-#define HID0_DISABLE_ADDRESS_BROADCAST 0x00000000
-#define HID0_ENABLE_ADDRESS_BROADCAST 0x00000008
+#define HID0_DISABLE_ADDRESS_BROADCAST 0x00000000
+#define HID0_ENABLE_ADDRESS_BROADCAST 0x00000008
#define HID0_ENABLE_NOOP_DCACHE_INSTRUCTION 0x00000000
#define HID0_DISABLE_NOOP_DCACHE_INSTRUCTION 0x00000001
@@ -90,37 +90,37 @@
/* BAT (block address translation */
-#define BATU_BEPI_MSK 0xfffe0000
-#define BATU_BL_MSK 0x00001ffc
-
-#define BATU_BL_128K 0x00000000
-#define BATU_BL_256K 0x00000004
-#define BATU_BL_512K 0x0000000c
-#define BATU_BL_1M 0x0000001c
-#define BATU_BL_2M 0x0000003c
-#define BATU_BL_4M 0x0000007c
-#define BATU_BL_8M 0x000000fc
-#define BATU_BL_16M 0x000001fc
-#define BATU_BL_32M 0x000003fc
-#define BATU_BL_64M 0x000007fc
-#define BATU_BL_128M 0x00000ffc
-#define BATU_BL_256M 0x00001ffc
-
-#define BATU_VS 0x00000002
-#define BATU_VP 0x00000001
-
-#define BATL_BRPN_MSK 0xfffe0000
-#define BATL_WIMG_MSK 0x00000078
-
-#define BATL_WRITETHROUGH 0x00000040
-#define BATL_CACHEINHIBIT 0x00000020
-#define BATL_MEMCOHERENCE 0x00000010
-#define BATL_GUARDEDSTORAGE 0x00000008
-
-#define BATL_PP_MSK 0x00000003
-#define BATL_PP_00 0x00000000 /* No access */
-#define BATL_PP_01 0x00000001 /* Read-only */
-#define BATL_PP_10 0x00000002 /* Read-write */
-#define BATL_PP_11 0x00000003
+#define BATU_BEPI_MSK 0xfffe0000
+#define BATU_BL_MSK 0x00001ffc
+
+#define BATU_BL_128K 0x00000000
+#define BATU_BL_256K 0x00000004
+#define BATU_BL_512K 0x0000000c
+#define BATU_BL_1M 0x0000001c
+#define BATU_BL_2M 0x0000003c
+#define BATU_BL_4M 0x0000007c
+#define BATU_BL_8M 0x000000fc
+#define BATU_BL_16M 0x000001fc
+#define BATU_BL_32M 0x000003fc
+#define BATU_BL_64M 0x000007fc
+#define BATU_BL_128M 0x00000ffc
+#define BATU_BL_256M 0x00001ffc
+
+#define BATU_VS 0x00000002
+#define BATU_VP 0x00000001
+
+#define BATL_BRPN_MSK 0xfffe0000
+#define BATL_WIMG_MSK 0x00000078
+
+#define BATL_WRITETHROUGH 0x00000040
+#define BATL_CACHEINHIBIT 0x00000020
+#define BATL_MEMCOHERENCE 0x00000010
+#define BATL_GUARDEDSTORAGE 0x00000008
+
+#define BATL_PP_MSK 0x00000003
+#define BATL_PP_00 0x00000000 /* No access */
+#define BATL_PP_01 0x00000001 /* Read-only */
+#define BATL_PP_10 0x00000002 /* Read-write */
+#define BATL_PP_11 0x00000003
#endif /* __E300_H__ */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 2d07625..113ba48 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1054,7 +1054,7 @@ typedef struct ccsr_cpm {
* 0x9000-0x90bff: General SIU
*/
typedef struct ccsr_cpm_siu {
- char res1[80];
+ char res1[80];
uint smaer;
uint smser;
uint smevr;
@@ -1143,9 +1143,9 @@ typedef struct ccsr_cpm_timer {
/* 0x91018-0x912ff: SDMA */
typedef struct ccsr_cpm_sdma {
uchar sdsr;
- char res1[3];
- uchar sdmr;
- char res2[739];
+ char res1[3];
+ uchar sdmr;
+ char res2[739];
} ccsr_cpm_sdma_t;
/* 0x91300-0x9131f: FCC1 */
@@ -1228,7 +1228,7 @@ typedef struct ccsr_cpm_fcc3_ext {
/* 0x91400-0x915ef: TC layers */
typedef struct ccsr_cpm_tmp1 {
- char res[496];
+ char res[496];
} ccsr_cpm_tmp1_t;
/* 0x915f0-0x9185f: BRGs:5,6,7,8 */
@@ -1296,7 +1296,7 @@ typedef struct ccsr_cpm_scc {
/* 0x91a80-0x91a9f */
typedef struct ccsr_cpm_tmp2 {
- char res[32];
+ char res[32];
} ccsr_cpm_tmp2_t;
/* 0x91aa0-0x91aff: SPI */
@@ -1338,16 +1338,16 @@ typedef struct ccsr_cpm {
/* Some references are into the unique and known dpram spaces,
* others are from the generic base.
*/
-#define im_dprambase im_dpram1
- u_char im_dpram1[16*1024];
- char res1[16*1024];
- u_char im_dpram2[16*1024];
- char res2[16*1024];
- ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
- ccsr_cpm_intctl_t im_cpm_intctl; /* Interrupt Controller */
- ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
- ccsr_cpm_timer_t im_cpm_timer; /* CPM timers */
- ccsr_cpm_sdma_t im_cpm_sdma; /* SDMA control/status */
+#define im_dprambase im_dpram1
+ u_char im_dpram1[16*1024];
+ char res1[16*1024];
+ u_char im_dpram2[16*1024];
+ char res2[16*1024];
+ ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
+ ccsr_cpm_intctl_t im_cpm_intctl; /* Interrupt Controller */
+ ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
+ ccsr_cpm_timer_t im_cpm_timer; /* CPM timers */
+ ccsr_cpm_sdma_t im_cpm_sdma; /* SDMA control/status */
ccsr_cpm_fcc1_t im_cpm_fcc1;
ccsr_cpm_fcc2_t im_cpm_fcc2;
ccsr_cpm_fcc3_t im_cpm_fcc3;
@@ -1553,7 +1553,7 @@ typedef struct par_io {
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
-#define MPC85xx_PORBMSR_HA 0x00070000
+#define MPC85xx_PORBMSR_HA 0x00070000
uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
@@ -1561,13 +1561,13 @@ typedef struct ccsr_gur {
#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
#define MPC85xx_PORDEVSR_IO_SEL 0x00380000
-#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
-#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
-#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
-#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
-#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
+#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
+#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
+#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
+#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
+#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
-#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
+#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
uint pordevsr2; /* 0xe0014 - POR I/O device status regsiter 2 */
@@ -1593,13 +1593,13 @@ typedef struct ccsr_gur {
#define MPC85xx_DEVDISR_SEC 0x01000000
#define MPC85xx_DEVDISR_SRIO 0x00080000
#define MPC85xx_DEVDISR_RMSG 0x00040000
-#define MPC85xx_DEVDISR_DDR 0x00010000
-#define MPC85xx_DEVDISR_CPU 0x00008000
-#define MPC85xx_DEVDISR_CPU0 MPC85xx_DEVDISR_CPU
-#define MPC85xx_DEVDISR_TB 0x00004000
-#define MPC85xx_DEVDISR_TB0 MPC85xx_DEVDISR_TB
-#define MPC85xx_DEVDISR_CPU1 0x00002000
-#define MPC85xx_DEVDISR_TB1 0x00001000
+#define MPC85xx_DEVDISR_DDR 0x00010000
+#define MPC85xx_DEVDISR_CPU 0x00008000
+#define MPC85xx_DEVDISR_CPU0 MPC85xx_DEVDISR_CPU
+#define MPC85xx_DEVDISR_TB 0x00004000
+#define MPC85xx_DEVDISR_TB0 MPC85xx_DEVDISR_TB
+#define MPC85xx_DEVDISR_CPU1 0x00002000
+#define MPC85xx_DEVDISR_TB1 0x00001000
#define MPC85xx_DEVDISR_DMA 0x00000400
#define MPC85xx_DEVDISR_TSEC1 0x00000080
#define MPC85xx_DEVDISR_TSEC2 0x00000040
diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h
index 0b78c94..c03b4b8 100644
--- a/include/asm-ppc/immap_86xx.h
+++ b/include/asm-ppc/immap_86xx.h
@@ -119,7 +119,7 @@ typedef struct ccsr_ddr {
uint sdram_mode_2; /* 0x211c - DDR SDRAM Mode Configuration 2 */
uint sdram_mode_cntl; /* 0x2120 - DDR SDRAM Mode Control */
uint sdram_interval; /* 0x2124 - DDR SDRAM Interval Configuration */
- uint sdram_data_init; /* 0x2128 - DDR SDRAM Data Initialization */
+ uint sdram_data_init; /* 0x2128 - DDR SDRAM Data Initialization */
char res8[4];
uint sdram_clk_cntl; /* 0x2130 - DDR SDRAM Clock Control */
char res9[12];
@@ -464,7 +464,7 @@ typedef struct ccsr_dma {
/* tsec1-4: 24000-28000 */
typedef struct ccsr_tsec {
- uint id; /* 0x24000 - Controller ID Register */
+ uint id; /* 0x24000 - Controller ID Register */
char res1[12];
uint ievent; /* 0x24010 - Interrupt Event Register */
uint imask; /* 0x24014 - Interrupt Mask Register */
@@ -538,7 +538,7 @@ typedef struct ccsr_tsec {
uint rbifx; /* 0x24330 - Receive bit field extract control Register */
uint rqfar; /* 0x24334 - Receive queue filing table address Register */
uint rqfcr; /* 0x24338 - Receive queue filing table control Register */
- uint rqfpr; /* 0x2433c - Receive queue filing table property Register */
+ uint rqfpr; /* 0x2433c - Receive queue filing table property Register */
uint mrblr; /* 0x24340 - Maximum Receive Buffer Length Register */
char res28[56];
uint rbdbph; /* 0x2437C - Receive Data Buffer Pointer High */
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 49d6860..4f78ca7 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -343,7 +343,7 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
#define MAS0_NV(x) ((x) & 0x00000FFF)
-#define MAS1_VALID 0x80000000
+#define MAS1_VALID 0x80000000
#define MAS1_IPROT 0x40000000
#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
#define MAS1_TS 0x00001000
@@ -685,7 +685,7 @@ extern int num_tlb_entries;
#define MSYNC .long 0x7c000000|\
(598<<1)
-#define MBAR_INST .long 0x7c000000|\
+#define MBAR_INST .long 0x7c000000|\
(854<<1)
#ifndef __ASSEMBLY__
diff --git a/include/asm-ppc/ppc4xx-intvec.h b/include/asm-ppc/ppc4xx-intvec.h
index e218119..5b45de4 100644
--- a/include/asm-ppc/ppc4xx-intvec.h
+++ b/include/asm-ppc/ppc4xx-intvec.h
@@ -323,9 +323,9 @@
#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */
#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */
-#define VECNUM_MS 18 /* MAL_SERR_INT */
-#define VECNUM_TXDE 18 /* MAL_TXDE_INT */
-#define VECNUM_RXDE 18 /* MAL_RXDE_INT */
+#define VECNUM_MS 18 /* MAL_SERR_INT */
+#define VECNUM_TXDE 18 /* MAL_TXDE_INT */
+#define VECNUM_RXDE 18 /* MAL_RXDE_INT */
#define VECNUM_MTE 19 /* MAL TXEOB */
#define VECNUM_MTE1 20 /* MAL TXEOB1 */
diff --git a/include/asm-ppc/ptrace.h b/include/asm-ppc/ptrace.h
index 3c2f4e6..196613b 100644
--- a/include/asm-ppc/ptrace.h
+++ b/include/asm-ppc/ptrace.h
@@ -39,7 +39,7 @@ struct pt_regs {
PPC_REG trap; /* Reason for being here */
PPC_REG dar; /* Fault registers */
PPC_REG dsisr;
- PPC_REG result; /* Result of a system call */
+ PPC_REG result; /* Result of a system call */
};
#endif
diff --git a/include/asm-ppc/sigcontext.h b/include/asm-ppc/sigcontext.h
index 4bd66a7..715c868 100644
--- a/include/asm-ppc/sigcontext.h
+++ b/include/asm-ppc/sigcontext.h
@@ -9,7 +9,7 @@ struct sigcontext_struct {
int signal;
unsigned long handler;
unsigned long oldmask;
- struct pt_regs *regs;
+ struct pt_regs *regs;
};
#endif
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 786ba03..83af2f5 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -126,14 +126,14 @@ typedef struct bd_info {
#if defined(CONFIG_4xx)
#if defined(CONFIG_440GX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
- int bi_phynum[4]; /* Determines phy mapping */
- int bi_phymode[4]; /* Determines phy mode */
+ int bi_phynum[4]; /* Determines phy mapping */
+ int bi_phymode[4]; /* Determines phy mode */
#elif defined(CONFIG_405EP) || defined(CONFIG_440)
- int bi_phynum[2]; /* Determines phy mapping */
- int bi_phymode[2]; /* Determines phy mode */
+ int bi_phynum[2]; /* Determines phy mapping */
+ int bi_phymode[2]; /* Determines phy mode */
#else
- int bi_phynum[1]; /* Determines phy mapping */
- int bi_phymode[1]; /* Determines phy mode */
+ int bi_phynum[1]; /* Determines phy mapping */
+ int bi_phymode[1]; /* Determines phy mode */
#endif
#endif /* defined(CONFIG_4xx) */
} bd_t;
diff --git a/include/asm-sh/cpu_sh7750.h b/include/asm-sh/cpu_sh7750.h
index 3c3c309..4e43a46 100644
--- a/include/asm-sh/cpu_sh7750.h
+++ b/include/asm-sh/cpu_sh7750.h
@@ -32,108 +32,108 @@
#endif
/* OCN */
-#define PTEH 0xFF000000
-#define PTEL 0xFF000004
-#define TTB 0xFF000008
-#define TEA 0xFF00000C
-#define MMUCR 0xFF000010
-#define BASRA 0xFF000014
+#define PTEH 0xFF000000
+#define PTEL 0xFF000004
+#define TTB 0xFF000008
+#define TEA 0xFF00000C
+#define MMUCR 0xFF000010
+#define BASRA 0xFF000014
#define BASRB 0xFF000018
#define CCR 0xFF00001C
-#define TRA 0xFF000020
-#define EXPEVT 0xFF000024
-#define INTEVT 0xFF000028
-#define PTEA 0xFF000034
-#define QACR0 0xFF000038
-#define QACR1 0xFF00003C
+#define TRA 0xFF000020
+#define EXPEVT 0xFF000024
+#define INTEVT 0xFF000028
+#define PTEA 0xFF000034
+#define QACR0 0xFF000038
+#define QACR1 0xFF00003C
/* UBC */
-#define BARA 0xFF200000
-#define BAMRA 0xFF200004
-#define BBRA 0xFF200008
-#define BARB 0xFF20000C
-#define BAMRB 0xFF200010
-#define BBRB 0xFF200014
-#define BDRB 0xFF200018
-#define BDMRB 0xFF20001C
-#define BRCR 0xFF200020
+#define BARA 0xFF200000
+#define BAMRA 0xFF200004
+#define BBRA 0xFF200008
+#define BARB 0xFF20000C
+#define BAMRB 0xFF200010
+#define BBRB 0xFF200014
+#define BDRB 0xFF200018
+#define BDMRB 0xFF20001C
+#define BRCR 0xFF200020
/* BSC */
#define BCR1 0xFF800000
#define BCR2 0xFF800004
-#define BCR3 0xFF800050
+#define BCR3 0xFF800050
#define BCR4 0xFE0A00F0
-#define WCR1 0xFF800008
-#define WCR2 0xFF80000C
-#define WCR3 0xFF800010
-#define MCR 0xFF800014
-#define PCR 0xFF800018
-#define RTCSR 0xFF80001C
-#define RTCNT 0xFF800020
-#define RTCOR 0xFF800024
-#define RFCR 0xFF800028
-#define PCTRA 0xFF80002C
-#define PDTRA 0xFF800030
-#define PCTRB 0xFF800040
-#define PDTRB 0xFF800044
-#define GPIOIC 0xFF800048
+#define WCR1 0xFF800008
+#define WCR2 0xFF80000C
+#define WCR3 0xFF800010
+#define MCR 0xFF800014
+#define PCR 0xFF800018
+#define RTCSR 0xFF80001C
+#define RTCNT 0xFF800020
+#define RTCOR 0xFF800024
+#define RFCR 0xFF800028
+#define PCTRA 0xFF80002C
+#define PDTRA 0xFF800030
+#define PCTRB 0xFF800040
+#define PDTRB 0xFF800044
+#define GPIOIC 0xFF800048
/* DMAC */
-#define SAR0 0xFFA00000
-#define DAR0 0xFFA00004
+#define SAR0 0xFFA00000
+#define DAR0 0xFFA00004
#define DMATCR0 0xFFA00008
#define CHCR0 0xFFA0000C
-#define SAR1 0xFFA00010
-#define DAR1 0xFFA00014
+#define SAR1 0xFFA00010
+#define DAR1 0xFFA00014
#define DMATCR1 0xFFA00018
-#define CHCR1 0xFFA0001C
-#define SAR2 0xFFA00020
-#define DAR2 0xFFA00024
+#define CHCR1 0xFFA0001C
+#define SAR2 0xFFA00020
+#define DAR2 0xFFA00024
#define DMATCR2 0xFFA00028
-#define CHCR2 0xFFA0002C
-#define SAR3 0xFFA00030
-#define DAR3 0xFFA00034
+#define CHCR2 0xFFA0002C
+#define SAR3 0xFFA00030
+#define DAR3 0xFFA00034
#define DMATCR3 0xFFA00038
-#define CHCR3 0xFFA0003C
-#define DMAOR 0xFFA00040
+#define CHCR3 0xFFA0003C
+#define DMAOR 0xFFA00040
#define SAR4 0xFFA00050
-#define DAR4 0xFFA00054
+#define DAR4 0xFFA00054
#define DMATCR4 0xFFA00058
/* CPG */
-#define FRQCR 0xFFC00000
-#define STBCR 0xFFC00004
-#define WTCNT 0xFFC00008
-#define WTCSR 0xFFC0000C
-#define STBCR2 0xFFC00010
+#define FRQCR 0xFFC00000
+#define STBCR 0xFFC00004
+#define WTCNT 0xFFC00008
+#define WTCSR 0xFFC0000C
+#define STBCR2 0xFFC00010
/* RTC */
#define R64CNT 0xFFC80000
#define RSECCNT 0xFFC80004
#define RMINCNT 0xFFC80008
-#define RHRCNT 0xFFC8000C
-#define RWKCNT 0xFFC80010
+#define RHRCNT 0xFFC8000C
+#define RWKCNT 0xFFC80010
#define RDAYCNT 0xFFC80014
#define RMONCNT 0xFFC80018
-#define RYRCNT 0xFFC8001C
-#define RSECAR 0xFFC80020
-#define RMINAR 0xFFC80024
-#define RHRAR 0xFFC80028
-#define RWKAR 0xFFC8002C
-#define RDAYAR 0xFFC80030
-#define RMONAR 0xFFC80034
-#define RCR1 0xFFC80038
-#define RCR2 0xFFC8003C
-#define RCR3 0xFFC80050
-#define RYRAR 0xFFC80054
+#define RYRCNT 0xFFC8001C
+#define RSECAR 0xFFC80020
+#define RMINAR 0xFFC80024
+#define RHRAR 0xFFC80028
+#define RWKAR 0xFFC8002C
+#define RDAYAR 0xFFC80030
+#define RMONAR 0xFFC80034
+#define RCR1 0xFFC80038
+#define RCR2 0xFFC8003C
+#define RCR3 0xFFC80050
+#define RYRAR 0xFFC80054
/* ICR */
-#define ICR 0xFFD00000
-#define IPRA 0xFFD00004
-#define IPRB 0xFFD00008
+#define ICR 0xFFD00000
+#define IPRA 0xFFD00004
+#define IPRB 0xFFD00008
#define IPRC 0xFFD0000C
-#define IPRD 0xFFD00010
-#define INTPRI 0xFE080000
+#define IPRD 0xFFD00010
+#define INTPRI 0xFE080000
#define INTREQ 0xFE080020
#define INTMSK 0xFE080040
#define INTMSKCL 0xFE080060
@@ -143,54 +143,54 @@
#define CLKSTPCLR 0xFE0A0008
/* TMU */
-#define TSTR2 0xFE100004
-#define TCOR3 0xFE100008
-#define TCNT3 0xFE10000C
-#define TCR3 0xFE100010
-#define TCOR4 0xFE100014
-#define TCNT4 0xFE100018
-#define TCR4 0xFE10001C
-#define TOCR 0xFFD80000
-#define TSTR0 0xFFD80004
+#define TSTR2 0xFE100004
+#define TCOR3 0xFE100008
+#define TCNT3 0xFE10000C
+#define TCR3 0xFE100010
+#define TCOR4 0xFE100014
+#define TCNT4 0xFE100018
+#define TCR4 0xFE10001C
+#define TOCR 0xFFD80000
+#define TSTR0 0xFFD80004
#define TCOR0 0xFFD80008
-#define TCNT0 0xFFD8000C
-#define TCR0 0xFFD80010
-#define TCOR1 0xFFD80014
-#define TCNT1 0xFFD80018
-#define TCR1 0xFFD8001C
-#define TCOR2 0xFFD80020
-#define TCNT2 0xFFD80024
-#define TCR2 0xFFD80028
-#define TCPR2 0xFFD8002C
+#define TCNT0 0xFFD8000C
+#define TCR0 0xFFD80010
+#define TCOR1 0xFFD80014
+#define TCNT1 0xFFD80018
+#define TCR1 0xFFD8001C
+#define TCOR2 0xFFD80020
+#define TCNT2 0xFFD80024
+#define TCR2 0xFFD80028
+#define TCPR2 0xFFD8002C
#define TSTR TSTR0
/* SCI */
-#define SCSMR1 0xFFE00000
-#define SCBRR1 0xFFE00004
-#define SCSCR1 0xFFE00008
-#define SCTDR1 0xFFE0000C
-#define SCSSR1 0xFFE00010
-#define SCRDR1 0xFFE00014
+#define SCSMR1 0xFFE00000
+#define SCBRR1 0xFFE00004
+#define SCSCR1 0xFFE00008
+#define SCTDR1 0xFFE0000C
+#define SCSSR1 0xFFE00010
+#define SCRDR1 0xFFE00014
#define SCSCMR1 0xFFE00018
#define SCSPTR1 0xFFE0001C
#define SCF0_BASE SCSMR1
/* SCIF */
-#define SCSMR2 0xFFE80000
-#define SCBRR2 0xFFE80004
-#define SCSCR2 0xFFE80008
+#define SCSMR2 0xFFE80000
+#define SCBRR2 0xFFE80004
+#define SCSCR2 0xFFE80008
#define SCFTDR2 0xFFE8000C
-#define SCFSR2 0xFFE80010
+#define SCFSR2 0xFFE80010
#define SCFRDR2 0xFFE80014
-#define SCFCR2 0xFFE80018
-#define SCFDR2 0xFFE8001C
+#define SCFCR2 0xFFE80018
+#define SCFDR2 0xFFE8001C
#define SCSPTR2 0xFFE80020
-#define SCLSR2 0xFFE80024
+#define SCLSR2 0xFFE80024
#define SCIF1_BASE SCSMR2
/* H-UDI */
-#define SDIR 0xFFF00000
-#define SDDR 0xFFF00008
-#define SDINT 0xFFF00014
+#define SDIR 0xFFF00000
+#define SDDR 0xFFF00008
+#define SDINT 0xFFF00014
#endif /* _ASM_CPU_SH7750_H_ */
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
index 14cc1ac..16252cc 100644
--- a/include/asm-sh/ptrace.h
+++ b/include/asm-sh/ptrace.h
@@ -28,7 +28,7 @@
#define REG_PR 17
#define REG_SR 18
-#define REG_GBR 19
+#define REG_GBR 19
#define REG_MACH 20
#define REG_MACL 21
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
index b353bc5..a62c422 100644
--- a/include/asm-sh/system.h
+++ b/include/asm-sh/system.h
@@ -23,21 +23,21 @@
register unsigned long *__ts5 __asm__ ("r5") = (unsigned long *)next; \
register unsigned long *__ts6 __asm__ ("r6") = &next->thread.sp; \
register unsigned long __ts7 __asm__ ("r7") = next->thread.pc; \
- __asm__ __volatile__ (".balign 4\n\t" \
- "stc.l gbr, @-r15\n\t" \
- "sts.l pr, @-r15\n\t" \
- "mov.l r8, @-r15\n\t" \
- "mov.l r9, @-r15\n\t" \
- "mov.l r10, @-r15\n\t" \
- "mov.l r11, @-r15\n\t" \
- "mov.l r12, @-r15\n\t" \
- "mov.l r13, @-r15\n\t" \
- "mov.l r14, @-r15\n\t" \
+ __asm__ __volatile__ (".balign 4\n\t" \
+ "stc.l gbr, @-r15\n\t" \
+ "sts.l pr, @-r15\n\t" \
+ "mov.l r8, @-r15\n\t" \
+ "mov.l r9, @-r15\n\t" \
+ "mov.l r10, @-r15\n\t" \
+ "mov.l r11, @-r15\n\t" \
+ "mov.l r12, @-r15\n\t" \
+ "mov.l r13, @-r15\n\t" \
+ "mov.l r14, @-r15\n\t" \
"mov.l r15, @r1 ! save SP\n\t" \
"mov.l @r6, r15 ! change to new stack\n\t" \
- "mova 1f, %0\n\t" \
- "mov.l %0, @r2 ! save PC\n\t" \
- "mov.l 2f, %0\n\t" \
+ "mova 1f, %0\n\t" \
+ "mov.l %0, @r2 ! save PC\n\t" \
+ "mov.l 2f, %0\n\t" \
"jmp @%0 ! call __switch_to\n\t" \
" lds r7, pr ! with return to new PC\n\t" \
".balign 4\n" \
@@ -54,8 +54,8 @@
"lds.l @r15+, pr\n\t" \
"ldc.l @r15+, gbr\n\t" \
: "=z" (__last) \
- : "r" (__ts1), "r" (__ts2), "r" (__ts4), \
- "r" (__ts5), "r" (__ts6), "r" (__ts7) \
+ : "r" (__ts1), "r" (__ts2), "r" (__ts4), \
+ "r" (__ts5), "r" (__ts6), "r" (__ts7) \
: "r3", "t"); \
last = __last; \
} while (0)
@@ -145,7 +145,7 @@ do { \
"mov.l 1f, %0\n\t" \
"or %1, %0\n\t" \
"jmp @%0\n\t" \
- " nop\n\t" \
+ " nop\n\t" \
".balign 4\n" \
"1: .long 2f\n" \
"2:" \
diff --git a/include/bcm5221.h b/include/bcm5221.h
index 6fb94aa..61424b1 100644
--- a/include/bcm5221.h
+++ b/include/bcm5221.h
@@ -23,7 +23,7 @@
* MA 02111-1307 USA
*/
-#define BCM5221_BMCR 0 /* Basic Mode Control Register */
+#define BCM5221_BMCR 0 /* Basic Mode Control Register */
#define BCM5221_BMSR 1 /* Basic Mode Status Register */
#define BCM5221_PHYID1 2 /* PHY Identifier Register 1 */
#define BCM5221_PHYID2 3 /* PHY Identifier Register 2 */
diff --git a/include/bedbug/ppc.h b/include/bedbug/ppc.h
index 9cc8f9f..46bf8db 100644
--- a/include/bedbug/ppc.h
+++ b/include/bedbug/ppc.h
@@ -321,7 +321,7 @@ struct opcode {
array are the operand identifiers */
int (*hfunc)(struct ppc_ctx *);
- /* Address of a function to handle the given
+ /* Address of a function to handle the given
mnemonic */
char * name; /* The symbolic name of this opcode */
diff --git a/include/bedbug/tables.h b/include/bedbug/tables.h
index 66cf8ea..e675de3 100644
--- a/include/bedbug/tables.h
+++ b/include/bedbug/tables.h
@@ -12,43 +12,43 @@
*/
struct operand operands[] = {
- /*Field Name Bits Shift Hint Position */
- /*----- ------ ----- ----- ---- ------------ */
- { O_AA, "O_AA", 1, 1, OH_SILENT }, /* 30 */
+ /*Field Name Bits Shift Hint Position */
+ /*----- ------ ----- ----- ---- ------------ */
+ { O_AA, "O_AA", 1, 1, OH_SILENT }, /* 30 */
{ O_BD, "O_BD", 14, 2, OH_ADDR }, /* 16-29 */
- { O_BI, "O_BI", 5, 16, 0 }, /* 11-15 */
- { O_BO, "O_BO", 5, 21, 0 }, /* 6-10 */
- { O_crbD, "O_crbD", 5, 21, 0 }, /* 6-10 */
- { O_crbA, "O_crbA", 5, 16, 0 }, /* 11-15 */
- { O_crbB, "O_crbB", 5, 11, 0 }, /* 16-20 */
- { O_CRM, "O_CRM", 8, 12, 0 }, /* 12-19 */
+ { O_BI, "O_BI", 5, 16, 0 }, /* 11-15 */
+ { O_BO, "O_BO", 5, 21, 0 }, /* 6-10 */
+ { O_crbD, "O_crbD", 5, 21, 0 }, /* 6-10 */
+ { O_crbA, "O_crbA", 5, 16, 0 }, /* 11-15 */
+ { O_crbB, "O_crbB", 5, 11, 0 }, /* 16-20 */
+ { O_CRM, "O_CRM", 8, 12, 0 }, /* 12-19 */
{ O_d, "O_d", 15, 0, OH_OFFSET }, /* 16-31 */
- { O_frC, "O_frC", 5, 6, 0 }, /* 21-25 */
- { O_frD, "O_frD", 5, 21, 0 }, /* 6-10 */
- { O_frS, "O_frS", 5, 21, 0 }, /* 6-10 */
- { O_IMM, "O_IMM", 4, 12, 0 }, /* 16-19 */
+ { O_frC, "O_frC", 5, 6, 0 }, /* 21-25 */
+ { O_frD, "O_frD", 5, 21, 0 }, /* 6-10 */
+ { O_frS, "O_frS", 5, 21, 0 }, /* 6-10 */
+ { O_IMM, "O_IMM", 4, 12, 0 }, /* 16-19 */
{ O_LI, "O_LI", 24, 2, OH_ADDR }, /* 6-29 */
- { O_LK, "O_LK", 1, 0, OH_SILENT }, /* 31 */
- { O_MB, "O_MB", 5, 6, 0 }, /* 21-25 */
- { O_ME, "O_ME", 5, 1, 0 }, /* 26-30 */
- { O_NB, "O_NB", 5, 11, 0 }, /* 16-20 */
- { O_OE, "O_OE", 1, 10, OH_SILENT }, /* 21 */
- { O_rA, "O_rA", 5, 16, OH_REG }, /* 11-15 */
- { O_rB, "O_rB", 5, 11, OH_REG }, /* 16-20 */
- { O_Rc, "O_Rc", 1, 0, OH_SILENT }, /* 31 */
- { O_rD, "O_rD", 5, 21, OH_REG }, /* 6-10 */
- { O_rS, "O_rS", 5, 21, OH_REG }, /* 6-10 */
- { O_SH, "O_SH", 5, 11, 0 }, /* 16-20 */
+ { O_LK, "O_LK", 1, 0, OH_SILENT }, /* 31 */
+ { O_MB, "O_MB", 5, 6, 0 }, /* 21-25 */
+ { O_ME, "O_ME", 5, 1, 0 }, /* 26-30 */
+ { O_NB, "O_NB", 5, 11, 0 }, /* 16-20 */
+ { O_OE, "O_OE", 1, 10, OH_SILENT }, /* 21 */
+ { O_rA, "O_rA", 5, 16, OH_REG }, /* 11-15 */
+ { O_rB, "O_rB", 5, 11, OH_REG }, /* 16-20 */
+ { O_Rc, "O_Rc", 1, 0, OH_SILENT }, /* 31 */
+ { O_rD, "O_rD", 5, 21, OH_REG }, /* 6-10 */
+ { O_rS, "O_rS", 5, 21, OH_REG }, /* 6-10 */
+ { O_SH, "O_SH", 5, 11, 0 }, /* 16-20 */
{ O_SIMM, "O_SIMM", 16, 0, 0 }, /* 16-31 */
- { O_SR, "O_SR", 4, 16, 0 }, /* 12-15 */
- { O_TO, "O_TO", 5, 21, 0 }, /* 6-10 */
+ { O_SR, "O_SR", 4, 16, 0 }, /* 12-15 */
+ { O_TO, "O_TO", 5, 21, 0 }, /* 6-10 */
{ O_UIMM, "O_UIMM", 16, 0, 0 }, /* 16-31 */
- { O_crfD, "O_crfD", 3, 23, 0 }, /* 6- 8 */
- { O_crfS, "O_crfS", 3, 18, 0 }, /* 11-13 */
- { O_L, "O_L", 1, 21, 0 }, /* 10 */
+ { O_crfD, "O_crfD", 3, 23, 0 }, /* 6- 8 */
+ { O_crfS, "O_crfS", 3, 18, 0 }, /* 11-13 */
+ { O_L, "O_L", 1, 21, 0 }, /* 10 */
{ O_spr, "O_spr", 10, 11, OH_SPR }, /* 11-20 */
{ O_tbr, "O_tbr", 10, 11, OH_TBR }, /* 11-20 */
- { O_cr2, "O_cr2", 0, 0, OH_LITERAL }, /* "cr2" */
+ { O_cr2, "O_cr2", 0, 0, OH_LITERAL }, /* "cr2" */
};
const unsigned int n_operands = sizeof(operands) / sizeof(operands[0]);
@@ -64,418 +64,418 @@ const unsigned int n_operands = sizeof(operands) / sizeof(operands[0]);
bit locations */
struct opcode opcodes[] = {
- { D_OPCODE(3), D_MASK, {O_TO, O_rA, O_SIMM, 0},
- 0, "twi", 0 },
- { D_OPCODE(7), D_MASK, {O_rD, O_rA, O_SIMM, 0},
- 0, "mulli", 0 },
- { D_OPCODE(8), D_MASK, {O_rD, O_rA, O_SIMM, 0},
- 0, "subfic", 0 },
- { D_OPCODE(10), D_MASK, {O_crfD, O_L, O_rA, O_UIMM, 0},
- 0, "cmpli", 0 },
- { D_OPCODE(11), D_MASK, {O_crfD, O_L, O_rA, O_SIMM, 0},
- 0, "cmpi", 0 },
- { D_OPCODE(12), D_MASK, {O_rD, O_rA, O_SIMM, 0},
- 0, "addic", 0 },
- { D_OPCODE(13), D_MASK, {O_rD, O_rA, O_SIMM, 0},
- 0, "addic.", 0 },
- { D_OPCODE(14), D_MASK, {O_rD, O_rA, O_SIMM, 0},
- 0, "addi", H_RA0_IS_0 },
- { D_OPCODE(15), D_MASK, {O_rD, O_rA, O_SIMM, 0},
- 0, "addis", H_RA0_IS_0|H_IMM_HIGH },
- { B_OPCODE(16,0,0), B_MASK, {O_BO, O_BI, O_BD, O_AA, O_LK, 0},
- handle_bc, "bc", H_RELATIVE },
- { B_OPCODE(16,0,1), B_MASK, {O_BO, O_BI, O_BD, O_AA, O_LK, 0},
- 0, "bcl", H_RELATIVE },
- { B_OPCODE(16,1,0), B_MASK, {O_BO, O_BI, O_BD, O_AA, O_LK, 0},
- 0, "bca", 0 },
- { B_OPCODE(16,1,1), B_MASK, {O_BO, O_BI, O_BD, O_AA, O_LK, 0},
- 0, "bcla", 0 },
- { SC_OPCODE(17), SC_MASK, {0},
- 0, "sc", 0 },
- { I_OPCODE(18,0,0), I_MASK, {O_LI, O_AA, O_LK, 0},
- 0, "b", H_RELATIVE },
- { I_OPCODE(18,0,1), I_MASK, {O_LI, O_AA, O_LK, 0},
- 0, "bl", H_RELATIVE },
- { I_OPCODE(18,1,0), I_MASK, {O_LI, O_AA, O_LK, 0},
- 0, "ba", 0 },
- { I_OPCODE(18,1,1), I_MASK, {O_LI, O_AA, O_LK, 0},
- 0, "bla", 0 },
- { XL_OPCODE(19,0,0), XL_MASK, {O_crfD, O_crfS},
- 0, "mcrf", 0 },
+ { D_OPCODE(3), D_MASK, {O_TO, O_rA, O_SIMM, 0},
+ 0, "twi", 0 },
+ { D_OPCODE(7), D_MASK, {O_rD, O_rA, O_SIMM, 0},
+ 0, "mulli", 0 },
+ { D_OPCODE(8), D_MASK, {O_rD, O_rA, O_SIMM, 0},
+ 0, "subfic", 0 },
+ { D_OPCODE(10), D_MASK, {O_crfD, O_L, O_rA, O_UIMM, 0},
+ 0, "cmpli", 0 },
+ { D_OPCODE(11), D_MASK, {O_crfD, O_L, O_rA, O_SIMM, 0},
+ 0, "cmpi", 0 },
+ { D_OPCODE(12), D_MASK, {O_rD, O_rA, O_SIMM, 0},
+ 0, "addic", 0 },
+ { D_OPCODE(13), D_MASK, {O_rD, O_rA, O_SIMM, 0},
+ 0, "addic.", 0 },
+ { D_OPCODE(14), D_MASK, {O_rD, O_rA, O_SIMM, 0},
+ 0, "addi", H_RA0_IS_0 },
+ { D_OPCODE(15), D_MASK, {O_rD, O_rA, O_SIMM, 0},
+ 0, "addis", H_RA0_IS_0|H_IMM_HIGH },
+ { B_OPCODE(16,0,0), B_MASK, {O_BO, O_BI, O_BD, O_AA, O_LK, 0},
+ handle_bc, "bc", H_RELATIVE },
+ { B_OPCODE(16,0,1), B_MASK, {O_BO, O_BI, O_BD, O_AA, O_LK, 0},
+ 0, "bcl", H_RELATIVE },
+ { B_OPCODE(16,1,0), B_MASK, {O_BO, O_BI, O_BD, O_AA, O_LK, 0},
+ 0, "bca", 0 },
+ { B_OPCODE(16,1,1), B_MASK, {O_BO, O_BI, O_BD, O_AA, O_LK, 0},
+ 0, "bcla", 0 },
+ { SC_OPCODE(17), SC_MASK, {0},
+ 0, "sc", 0 },
+ { I_OPCODE(18,0,0), I_MASK, {O_LI, O_AA, O_LK, 0},
+ 0, "b", H_RELATIVE },
+ { I_OPCODE(18,0,1), I_MASK, {O_LI, O_AA, O_LK, 0},
+ 0, "bl", H_RELATIVE },
+ { I_OPCODE(18,1,0), I_MASK, {O_LI, O_AA, O_LK, 0},
+ 0, "ba", 0 },
+ { I_OPCODE(18,1,1), I_MASK, {O_LI, O_AA, O_LK, 0},
+ 0, "bla", 0 },
+ { XL_OPCODE(19,0,0), XL_MASK, {O_crfD, O_crfS},
+ 0, "mcrf", 0 },
{ XL_OPCODE(19,16,0), XL_MASK, {O_BO, O_BI, O_LK, 0},
- 0, "bclr", 0 },
+ 0, "bclr", 0 },
{ XL_OPCODE(19,16,1), XL_MASK, {O_BO, O_BI, O_LK, 0},
- 0, "bclrl", 0 },
+ 0, "bclrl", 0 },
{ XL_OPCODE(19,33,0), XL_MASK, {O_crbD, O_crbA, O_crbB, 0},
- 0, "crnor", 0 },
+ 0, "crnor", 0 },
{ XL_OPCODE(19,50,0), XL_MASK, {0},
- 0, "rfi", 0 },
+ 0, "rfi", 0 },
{ XL_OPCODE(19,129,0), XL_MASK, {O_crbD, O_crbA, O_crbB, 0},
- 0, "crandc", 0 },
+ 0, "crandc", 0 },
{ XL_OPCODE(19,150,0), XL_MASK, {0},
- 0, "isync", 0 },
+ 0, "isync", 0 },
{ XL_OPCODE(19,193,0), XL_MASK, {O_crbD, O_crbA, O_crbB, 0},
- 0, "crxor", 0 },
+ 0, "crxor", 0 },
{ XL_OPCODE(19,225,0), XL_MASK, {O_crbD, O_crbA, O_crbB, 0},
- 0, "crnand", 0 },
+ 0, "crnand", 0 },
{ XL_OPCODE(19,257,0), XL_MASK, {O_crbD, O_crbA, O_crbB, 0},
- 0, "crand", 0 },
+ 0, "crand", 0 },
{ XL_OPCODE(19,289,0), XL_MASK, {O_crbD, O_crbA, O_crbB, 0},
- 0, "creqv", 0 },
+ 0, "creqv", 0 },
{ XL_OPCODE(19,417,0), XL_MASK, {O_crbD, O_crbA, O_crbB, 0},
- 0, "crorc", 0 },
+ 0, "crorc", 0 },
{ XL_OPCODE(19,449,0), XL_MASK, {O_crbD, O_crbA, O_crbB, 0},
- 0, "cror", 0 },
+ 0, "cror", 0 },
{ XL_OPCODE(19,528,0), XL_MASK, {O_BO, O_BI, O_LK, 0},
- 0, "bcctr", 0 },
+ 0, "bcctr", 0 },
{ XL_OPCODE(19,528,1), XL_MASK, {O_BO, O_BI, O_LK, 0},
- 0, "bcctrl", 0 },
- { M_OPCODE(20,0), M_MASK, {O_rA, O_rS, O_SH, O_MB, O_ME, O_Rc, 0},
- 0, "rlwimi", 0 },
- { M_OPCODE(20,1), M_MASK, {O_rA, O_rS, O_SH, O_MB, O_ME, O_Rc, 0},
- 0, "rlwimi.", 0 },
- { M_OPCODE(21,0), M_MASK, {O_rA, O_rS, O_SH, O_MB, O_ME, O_Rc, 0},
- 0, "rlwinm", 0 },
- { M_OPCODE(21,1), M_MASK, {O_rA, O_rS, O_SH, O_MB, O_ME, O_Rc, 0},
- 0, "rlwinm.", 0 },
- { M_OPCODE(23,0), M_MASK, {O_rA, O_rS, O_rB, O_MB, O_ME, O_Rc, 0},
- 0, "rlwnm", 0 },
- { M_OPCODE(23,1), M_MASK, {O_rA, O_rS, O_rB, O_MB, O_ME, O_Rc, 0},
- 0, "rlwnm.", 0 },
- { D_OPCODE(24), D_MASK, {O_rA, O_rS, O_UIMM, 0},
- 0, "ori", 0 },
- { D_OPCODE(25), D_MASK, {O_rA, O_rS, O_UIMM, 0},
- 0, "oris", H_IMM_HIGH },
- { D_OPCODE(26), D_MASK, {O_rA, O_rS, O_UIMM, 0},
- 0, "xori", 0 },
- { D_OPCODE(27), D_MASK, {O_rA, O_rS, O_UIMM, 0},
- 0, "xoris", H_IMM_HIGH },
- { D_OPCODE(28), D_MASK, {O_rA, O_rS, O_UIMM, 0},
- 0, "andi.", 0 },
- { D_OPCODE(29), D_MASK, {O_rA, O_rS, O_UIMM, 0},
- 0, "andis.", H_IMM_HIGH },
- { X_OPCODE(31,0,0), X_MASK, {O_crfD, O_L, O_rA, O_rB, 0},
- 0, "cmp", 0 },
- { X_OPCODE(31,4,0), X_MASK, {O_TO, O_rA, O_rB, 0},
- 0, "tw", 0 },
+ 0, "bcctrl", 0 },
+ { M_OPCODE(20,0), M_MASK, {O_rA, O_rS, O_SH, O_MB, O_ME, O_Rc, 0},
+ 0, "rlwimi", 0 },
+ { M_OPCODE(20,1), M_MASK, {O_rA, O_rS, O_SH, O_MB, O_ME, O_Rc, 0},
+ 0, "rlwimi.", 0 },
+ { M_OPCODE(21,0), M_MASK, {O_rA, O_rS, O_SH, O_MB, O_ME, O_Rc, 0},
+ 0, "rlwinm", 0 },
+ { M_OPCODE(21,1), M_MASK, {O_rA, O_rS, O_SH, O_MB, O_ME, O_Rc, 0},
+ 0, "rlwinm.", 0 },
+ { M_OPCODE(23,0), M_MASK, {O_rA, O_rS, O_rB, O_MB, O_ME, O_Rc, 0},
+ 0, "rlwnm", 0 },
+ { M_OPCODE(23,1), M_MASK, {O_rA, O_rS, O_rB, O_MB, O_ME, O_Rc, 0},
+ 0, "rlwnm.", 0 },
+ { D_OPCODE(24), D_MASK, {O_rA, O_rS, O_UIMM, 0},
+ 0, "ori", 0 },
+ { D_OPCODE(25), D_MASK, {O_rA, O_rS, O_UIMM, 0},
+ 0, "oris", H_IMM_HIGH },
+ { D_OPCODE(26), D_MASK, {O_rA, O_rS, O_UIMM, 0},
+ 0, "xori", 0 },
+ { D_OPCODE(27), D_MASK, {O_rA, O_rS, O_UIMM, 0},
+ 0, "xoris", H_IMM_HIGH },
+ { D_OPCODE(28), D_MASK, {O_rA, O_rS, O_UIMM, 0},
+ 0, "andi.", 0 },
+ { D_OPCODE(29), D_MASK, {O_rA, O_rS, O_UIMM, 0},
+ 0, "andis.", H_IMM_HIGH },
+ { X_OPCODE(31,0,0), X_MASK, {O_crfD, O_L, O_rA, O_rB, 0},
+ 0, "cmp", 0 },
+ { X_OPCODE(31,4,0), X_MASK, {O_TO, O_rA, O_rB, 0},
+ 0, "tw", 0 },
{ XO_OPCODE(31,8,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfc", 0 },
+ 0, "subfc", 0 },
{ XO_OPCODE(31,8,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfc.", 0 },
+ 0, "subfc.", 0 },
{ XO_OPCODE(31,10,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "addc", 0 },
+ 0, "addc", 0 },
{ XO_OPCODE(31,10,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "addc.", 0 },
+ 0, "addc.", 0 },
{ XO_OPCODE(31,11,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_Rc, 0},
- 0, "mulhwu", 0 },
+ 0, "mulhwu", 0 },
{ XO_OPCODE(31,11,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_Rc, 0},
- 0, "mulhwu.", 0 },
- { X_OPCODE(31,19,0), X_MASK, {O_rD, 0},
- 0, "mfcr", 0 },
- { X_OPCODE(31,20,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lwarx", H_RA0_IS_0 },
- { X_OPCODE(31,23,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lwzx", H_RA0_IS_0 },
- { X_OPCODE(31,24,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "slw", 0 },
- { X_OPCODE(31,24,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "slw.", 0 },
- { X_OPCODE(31,26,0), X_MASK, {O_rA, O_rS, O_Rc, 0 },
- 0, "cntlzw", 0 },
- { X_OPCODE(31,26,1), X_MASK, {O_rA, O_rS, O_Rc, 0},
- 0, "cntlzw.", 0 },
- { X_OPCODE(31,28,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "and", 0 },
- { X_OPCODE(31,28,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "and.", 0 },
- { X_OPCODE(31,32,0), X_MASK, {O_crfD, O_L, O_rA, O_rB, 0},
- 0, "cmpl", 0 },
+ 0, "mulhwu.", 0 },
+ { X_OPCODE(31,19,0), X_MASK, {O_rD, 0},
+ 0, "mfcr", 0 },
+ { X_OPCODE(31,20,0), X_MASK, {O_rD, O_rA, O_rB, 0},
+ 0, "lwarx", H_RA0_IS_0 },
+ { X_OPCODE(31,23,0), X_MASK, {O_rD, O_rA, O_rB, 0},
+ 0, "lwzx", H_RA0_IS_0 },
+ { X_OPCODE(31,24,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
+ 0, "slw", 0 },
+ { X_OPCODE(31,24,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
+ 0, "slw.", 0 },
+ { X_OPCODE(31,26,0), X_MASK, {O_rA, O_rS, O_Rc, 0 },
+ 0, "cntlzw", 0 },
+ { X_OPCODE(31,26,1), X_MASK, {O_rA, O_rS, O_Rc, 0},
+ 0, "cntlzw.", 0 },
+ { X_OPCODE(31,28,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
+ 0, "and", 0 },
+ { X_OPCODE(31,28,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
+ 0, "and.", 0 },
+ { X_OPCODE(31,32,0), X_MASK, {O_crfD, O_L, O_rA, O_rB, 0},
+ 0, "cmpl", 0 },
{ XO_OPCODE(31,40,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subf", 0 },
+ 0, "subf", 0 },
{ XO_OPCODE(31,40,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subf.", 0 },
- { X_OPCODE(31,54,0), X_MASK, {O_rA, O_rB, 0},
- 0, "dcbst", H_RA0_IS_0 },
- { X_OPCODE(31,55,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lwzux", 0 },
- { X_OPCODE(31,60,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "andc", 0 },
- { X_OPCODE(31,60,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "andc.", 0 },
+ 0, "subf.", 0 },
+ { X_OPCODE(31,54,0), X_MASK, {O_rA, O_rB, 0},
+ 0, "dcbst", H_RA0_IS_0 },
+ { X_OPCODE(31,55,0), X_MASK, {O_rD, O_rA, O_rB, 0},
+ 0, "lwzux", 0 },
+ { X_OPCODE(31,60,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
+ 0, "andc", 0 },
+ { X_OPCODE(31,60,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
+ 0, "andc.", 0 },
{ XO_OPCODE(31,75,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_Rc, 0},
- 0, "mulhw", 0 },
+ 0, "mulhw", 0 },
{ XO_OPCODE(31,75,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_Rc, 0},
- 0, "mulhw.", 0 },
- { X_OPCODE(31,83,0), X_MASK, {O_rD, 0},
- 0, "mfmsr", 0 },
- { X_OPCODE(31,86,0), X_MASK, {O_rA, O_rB, 0},
- 0, "dcbf", H_RA0_IS_0 },
- { X_OPCODE(31,87,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lbzx", H_RA0_IS_0 },
+ 0, "mulhw.", 0 },
+ { X_OPCODE(31,83,0), X_MASK, {O_rD, 0},
+ 0, "mfmsr", 0 },
+ { X_OPCODE(31,86,0), X_MASK, {O_rA, O_rB, 0},
+ 0, "dcbf", H_RA0_IS_0 },
+ { X_OPCODE(31,87,0), X_MASK, {O_rD, O_rA, O_rB, 0},
+ 0, "lbzx", H_RA0_IS_0 },
{ XO_OPCODE(31,104,0,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "neg", 0 },
+ 0, "neg", 0 },
{ XO_OPCODE(31,104,0,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "neg.", 0 },
+ 0, "neg.", 0 },
{ X_OPCODE(31,119,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lbzux", 0 },
+ 0, "lbzux", 0 },
{ X_OPCODE(31,124,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "nor", 0 },
+ 0, "nor", 0 },
{ X_OPCODE(31,124,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "nor.", 0 },
+ 0, "nor.", 0 },
{ XO_OPCODE(31,136,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfe", 0 },
+ 0, "subfe", 0 },
{ XO_OPCODE(31,136,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfe.", 0 },
+ 0, "subfe.", 0 },
{ XO_OPCODE(31,138,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "adde", 0 },
+ 0, "adde", 0 },
{ XO_OPCODE(31,138,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "adde.", 0 },
+ 0, "adde.", 0 },
{ XFX_OPCODE(31,144,0), XFX_MASK, {O_CRM, O_rS, 0},
- 0, "mtcrf", 0 },
+ 0, "mtcrf", 0 },
{ X_OPCODE(31,146,0), X_MASK, {O_rS, 0},
- 0, "mtmsr", 0 },
+ 0, "mtmsr", 0 },
{ X_OPCODE(31,150,1), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "stwcx.", 0 },
+ 0, "stwcx.", 0 },
{ X_OPCODE(31,151,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "stwx", 0 },
+ 0, "stwx", 0 },
{ X_OPCODE(31,183,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "stwux", 0 },
+ 0, "stwux", 0 },
{ XO_OPCODE(31,200,0,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "subfze", 0 },
+ 0, "subfze", 0 },
{ XO_OPCODE(31,200,0,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "subfze.", 0 },
+ 0, "subfze.", 0 },
{ XO_OPCODE(31,202,0,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "addze", 0 },
+ 0, "addze", 0 },
{ XO_OPCODE(31,202,0,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "addze.", 0 },
+ 0, "addze.", 0 },
{ X_OPCODE(31,210,0), X_MASK, {O_SR, O_rS, 0},
- 0, "mtsr", 0 },
+ 0, "mtsr", 0 },
{ X_OPCODE(31,215,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "stbx", H_RA0_IS_0 },
+ 0, "stbx", H_RA0_IS_0 },
{ XO_OPCODE(31,232,0,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "subfme", 0 },
+ 0, "subfme", 0 },
{ XO_OPCODE(31,232,0,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "subfme.", 0 },
+ 0, "subfme.", 0 },
{ XO_OPCODE(31,234,0,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "addme", 0 },
+ 0, "addme", 0 },
{ XO_OPCODE(31,234,0,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "addme.", 0 },
+ 0, "addme.", 0 },
{ XO_OPCODE(31,235,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "mullw", 0 },
+ 0, "mullw", 0 },
{ XO_OPCODE(31,235,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "mullw.", 0 },
+ 0, "mullw.", 0 },
{ X_OPCODE(31,242,0), X_MASK, {O_rS, O_rB, 0},
- 0, "mtsrin", 0 },
+ 0, "mtsrin", 0 },
{ X_OPCODE(31,246,0), X_MASK, {O_rA, O_rB, 0},
- 0, "dcbtst", H_RA0_IS_0 },
+ 0, "dcbtst", H_RA0_IS_0 },
{ X_OPCODE(31,247,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "stbux", 0 },
+ 0, "stbux", 0 },
{ XO_OPCODE(31,266,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "add", 0 },
+ 0, "add", 0 },
{ XO_OPCODE(31,266,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "add.", 0 },
+ 0, "add.", 0 },
{ X_OPCODE(31,278,0), X_MASK, {O_rA, O_rB, 0},
- 0, "dcbt", H_RA0_IS_0 },
+ 0, "dcbt", H_RA0_IS_0 },
{ X_OPCODE(31,279,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lhzx", H_RA0_IS_0 },
+ 0, "lhzx", H_RA0_IS_0 },
{ X_OPCODE(31,284,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "eqv", 0 },
+ 0, "eqv", 0 },
{ X_OPCODE(31,284,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "eqv.", 0 },
+ 0, "eqv.", 0 },
{ X_OPCODE(31,306,0), X_MASK, {O_rB, 0},
- 0, "tlbie", 0 },
+ 0, "tlbie", 0 },
{ X_OPCODE(31,310,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "eciwx", H_RA0_IS_0 },
+ 0, "eciwx", H_RA0_IS_0 },
{ X_OPCODE(31,311,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lhzux", 0 },
+ 0, "lhzux", 0 },
{ X_OPCODE(31,316,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "xor", 0 },
+ 0, "xor", 0 },
{ X_OPCODE(31,316,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "xor.", 0 },
+ 0, "xor.", 0 },
{ XFX_OPCODE(31,339,0), XFX_MASK, {O_rD, O_spr, 0},
- 0, "mfspr", 0 },
+ 0, "mfspr", 0 },
{ X_OPCODE(31,343,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lhax", H_RA0_IS_0 },
+ 0, "lhax", H_RA0_IS_0 },
{ X_OPCODE(31,370,0), X_MASK, {0},
- 0, "tlbia", 0 },
+ 0, "tlbia", 0 },
{ XFX_OPCODE(31,371,0), XFX_MASK, {O_rD, O_tbr, 0},
- 0, "mftb", 0 },
+ 0, "mftb", 0 },
{ X_OPCODE(31,375,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lhaux", 0 },
+ 0, "lhaux", 0 },
{ X_OPCODE(31,407,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "sthx", H_RA0_IS_0 },
+ 0, "sthx", H_RA0_IS_0 },
{ X_OPCODE(31,412,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "orc", 0 },
+ 0, "orc", 0 },
{ X_OPCODE(31,412,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "orc.", 0 },
+ 0, "orc.", 0 },
{ X_OPCODE(31,438,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "ecowx", H_RA0_IS_0 },
+ 0, "ecowx", H_RA0_IS_0 },
{ X_OPCODE(31,439,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "sthux", 0 },
+ 0, "sthux", 0 },
{ X_OPCODE(31,444,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "or", 0 },
+ 0, "or", 0 },
{ X_OPCODE(31,444,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "or.", 0 },
+ 0, "or.", 0 },
{ XO_OPCODE(31,459,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "divwu", 0 },
+ 0, "divwu", 0 },
{ XO_OPCODE(31,459,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "divwu.", 0 },
+ 0, "divwu.", 0 },
{ XFX_OPCODE(31,467,0), XFX_MASK, {O_spr, O_rS, 0},
- 0, "mtspr", 0 },
+ 0, "mtspr", 0 },
{ X_OPCODE(31,470,0), X_MASK, {O_rA, O_rB, 0},
- 0, "dcbi", H_RA0_IS_0 },
+ 0, "dcbi", H_RA0_IS_0 },
{ X_OPCODE(31,476,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "nand", 0 },
+ 0, "nand", 0 },
{ X_OPCODE(31,476,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc,0},
- 0, "nand.", 0 },
+ 0, "nand.", 0 },
{ XO_OPCODE(31,491,0,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "divw", 0 },
+ 0, "divw", 0 },
{ XO_OPCODE(31,491,0,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "divw.", 0 },
+ 0, "divw.", 0 },
{ X_OPCODE(31,512,0), X_MASK, {O_crfD, 0},
- 0, "mcrxr", 0 },
+ 0, "mcrxr", 0 },
{ XO_OPCODE(31,8,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfco", 0 },
+ 0, "subfco", 0 },
{ XO_OPCODE(31,8,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfco.", 0 },
+ 0, "subfco.", 0 },
{ XO_OPCODE(31,10,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "addco", 0 },
+ 0, "addco", 0 },
{ XO_OPCODE(31,10,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "addco.", 0 },
+ 0, "addco.", 0 },
{ X_OPCODE(31,533,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lswx", H_RA0_IS_0 },
+ 0, "lswx", H_RA0_IS_0 },
{ X_OPCODE(31,534,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lwbrx", H_RA0_IS_0 },
+ 0, "lwbrx", H_RA0_IS_0 },
{ X_OPCODE(31,536,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "srw", 0 },
+ 0, "srw", 0 },
{ X_OPCODE(31,536,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "srw.", 0 },
+ 0, "srw.", 0 },
{ XO_OPCODE(31,40,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfo", 0 },
+ 0, "subfo", 0 },
{ XO_OPCODE(31,40,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfo.", 0 },
+ 0, "subfo.", 0 },
{ X_OPCODE(31,566,0), X_MASK, {0},
- 0, "tlbsync", 0 },
+ 0, "tlbsync", 0 },
{ X_OPCODE(31,595,0), X_MASK, {O_rD, O_SR, 0},
- 0, "mfsr", 0 },
+ 0, "mfsr", 0 },
{ X_OPCODE(31,597,0), X_MASK, {O_rD, O_rA, O_NB, 0},
- 0, "lswi", H_RA0_IS_0 },
+ 0, "lswi", H_RA0_IS_0 },
{ X_OPCODE(31,598,0), X_MASK, {0},
- 0, "sync", 0 },
+ 0, "sync", 0 },
{ XO_OPCODE(31,104,1,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "nego", 0 },
+ 0, "nego", 0 },
{ XO_OPCODE(31,104,1,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "nego.", 0 },
+ 0, "nego.", 0 },
{ XO_OPCODE(31,136,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfeo", 0 },
+ 0, "subfeo", 0 },
{ XO_OPCODE(31,136,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "subfeo.", 0 },
+ 0, "subfeo.", 0 },
{ XO_OPCODE(31,138,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "addeo", 0 },
+ 0, "addeo", 0 },
{ XO_OPCODE(31,138,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "addeo.", 0 },
+ 0, "addeo.", 0 },
{ X_OPCODE(31,659,0), X_MASK, {O_rD, O_rB, 0},
- 0, "mfsrin", 0 },
+ 0, "mfsrin", 0 },
{ X_OPCODE(31,661,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "stswx", H_RA0_IS_0 },
+ 0, "stswx", H_RA0_IS_0 },
{ X_OPCODE(31,662,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "stwbrx", H_RA0_IS_0 },
+ 0, "stwbrx", H_RA0_IS_0 },
{ XO_OPCODE(31,200,1,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "subfzeo", 0 },
+ 0, "subfzeo", 0 },
{ XO_OPCODE(31,200,1,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "subfzeo.", 0 },
+ 0, "subfzeo.", 0 },
{ XO_OPCODE(31,202,1,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "addzeo", 0 },
+ 0, "addzeo", 0 },
{ XO_OPCODE(31,202,1,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "addzeo.", 0 },
+ 0, "addzeo.", 0 },
{ X_OPCODE(31,725,0), X_MASK, {O_rS, O_rA, O_NB, 0},
- 0, "stswi", H_RA0_IS_0 },
+ 0, "stswi", H_RA0_IS_0 },
{ XO_OPCODE(31,232,1,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "subfmeo", 0 },
+ 0, "subfmeo", 0 },
{ XO_OPCODE(31,232,1,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "subfmeo.", 0 },
+ 0, "subfmeo.", 0 },
{ XO_OPCODE(31,234,1,0), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "addmeo", 0 },
+ 0, "addmeo", 0 },
{ XO_OPCODE(31,234,1,1), XO_MASK, {O_rD, O_rA, O_OE, O_Rc, 0},
- 0, "addmeo.", 0 },
+ 0, "addmeo.", 0 },
{ XO_OPCODE(31,235,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "mullwo", 0 },
+ 0, "mullwo", 0 },
{ XO_OPCODE(31,235,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "mullwo.", 0 },
+ 0, "mullwo.", 0 },
{ XO_OPCODE(31,266,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "addo", 0 },
+ 0, "addo", 0 },
{ XO_OPCODE(31,266,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "addo.", 0 },
+ 0, "addo.", 0 },
{ X_OPCODE(31,790,0), X_MASK, {O_rD, O_rA, O_rB, 0},
- 0, "lhbrx", H_RA0_IS_0 },
+ 0, "lhbrx", H_RA0_IS_0 },
{ X_OPCODE(31,792,0), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "sraw", 0 },
+ 0, "sraw", 0 },
{ X_OPCODE(31,792,1), X_MASK, {O_rA, O_rS, O_rB, O_Rc, 0},
- 0, "sraw.", 0 },
+ 0, "sraw.", 0 },
{ X_OPCODE(31,824,0), X_MASK, {O_rA, O_rS, O_SH, O_Rc, 0},
- 0, "srawi", 0 },
+ 0, "srawi", 0 },
{ X_OPCODE(31,824,1), X_MASK, {O_rA, O_rS, O_SH, O_Rc, 0},
- 0, "srawi.", 0 },
+ 0, "srawi.", 0 },
{ X_OPCODE(31,854,0), X_MASK, {0},
- 0, "eieio", 0 },
+ 0, "eieio", 0 },
{ X_OPCODE(31,918,0), X_MASK, {O_rS, O_rA, O_rB, 0},
- 0, "sthbrx", H_RA0_IS_0 },
+ 0, "sthbrx", H_RA0_IS_0 },
{ X_OPCODE(31,922,0), X_MASK, {O_rA, O_rS, O_Rc, 0},
- 0, "extsh", 0 },
+ 0, "extsh", 0 },
{ X_OPCODE(31,922,1), X_MASK, {O_rA, O_rS, O_Rc, 0},
- 0, "extsh.", 0 },
+ 0, "extsh.", 0 },
{ X_OPCODE(31,954,0), X_MASK, {O_rA, O_rS, O_Rc, 0},
- 0, "extsb", 0 },
+ 0, "extsb", 0 },
{ X_OPCODE(31,954,1), X_MASK, {O_rA, O_rS, O_Rc, 0},
- 0, "extsb.", 0 },
+ 0, "extsb.", 0 },
{ XO_OPCODE(31,459,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "divwuo", 0 },
+ 0, "divwuo", 0 },
{ XO_OPCODE(31,459,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "divwuo.", 0 },
+ 0, "divwuo.", 0 },
{ X_OPCODE(31,978,0), X_MASK, {O_rB, 0},
- 0, "tlbld", 0 },
+ 0, "tlbld", 0 },
{ X_OPCODE(31,982,0), X_MASK, {O_rA, O_rB, 0},
- 0, "icbi", H_RA0_IS_0 },
+ 0, "icbi", H_RA0_IS_0 },
{ XO_OPCODE(31,491,1,0), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "divwo", 0 },
+ 0, "divwo", 0 },
{ XO_OPCODE(31,491,1,1), XO_MASK, {O_rD, O_rA, O_rB, O_OE, O_Rc, 0},
- 0, "divwo.", 0 },
+ 0, "divwo.", 0 },
{ X_OPCODE(31,1010,0), X_MASK, {O_rB, 0},
- 0, "tlbli", 0 },
+ 0, "tlbli", 0 },
{ X_OPCODE(31,1014,0), X_MASK, {O_rA, O_rB, 0},
- 0, "dcbz", H_RA0_IS_0 },
- { D_OPCODE(32), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lwz", H_RA0_IS_0 },
- { D_OPCODE(33), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lwzu", 0 },
- { D_OPCODE(34), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lbz", H_RA0_IS_0 },
- { D_OPCODE(35), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lbzu", 0 },
- { D_OPCODE(36), D_MASK, {O_rS, O_d, O_rA, 0},
- 0, "stw", H_RA0_IS_0 },
- { D_OPCODE(37), D_MASK, {O_rS, O_d, O_rA, 0},
- 0, "stwu", 0 },
- { D_OPCODE(38), D_MASK, {O_rS, O_d, O_rA, 0},
- 0, "stb", H_RA0_IS_0 },
- { D_OPCODE(39), D_MASK, {O_rS, O_d, O_rA, 0},
- 0, "stbu", 0 },
- { D_OPCODE(40), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lhz", H_RA0_IS_0 },
- { D_OPCODE(41), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lhzu", 0 },
- { D_OPCODE(42), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lha", H_RA0_IS_0 },
- { D_OPCODE(43), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lhau", 0 },
- { D_OPCODE(44), D_MASK, {O_rS, O_d, O_rA, 0},
- 0, "sth", H_RA0_IS_0 },
- { D_OPCODE(45), D_MASK, {O_rS, O_d, O_rA, 0},
- 0, "sthu", 0 },
- { D_OPCODE(46), D_MASK, {O_rD, O_d, O_rA, 0},
- 0, "lmw", H_RA0_IS_0 },
- { D_OPCODE(47), D_MASK, {O_rS, O_d, O_rA, 0},
- 0, "stmw", H_RA0_IS_0 },
+ 0, "dcbz", H_RA0_IS_0 },
+ { D_OPCODE(32), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lwz", H_RA0_IS_0 },
+ { D_OPCODE(33), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lwzu", 0 },
+ { D_OPCODE(34), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lbz", H_RA0_IS_0 },
+ { D_OPCODE(35), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lbzu", 0 },
+ { D_OPCODE(36), D_MASK, {O_rS, O_d, O_rA, 0},
+ 0, "stw", H_RA0_IS_0 },
+ { D_OPCODE(37), D_MASK, {O_rS, O_d, O_rA, 0},
+ 0, "stwu", 0 },
+ { D_OPCODE(38), D_MASK, {O_rS, O_d, O_rA, 0},
+ 0, "stb", H_RA0_IS_0 },
+ { D_OPCODE(39), D_MASK, {O_rS, O_d, O_rA, 0},
+ 0, "stbu", 0 },
+ { D_OPCODE(40), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lhz", H_RA0_IS_0 },
+ { D_OPCODE(41), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lhzu", 0 },
+ { D_OPCODE(42), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lha", H_RA0_IS_0 },
+ { D_OPCODE(43), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lhau", 0 },
+ { D_OPCODE(44), D_MASK, {O_rS, O_d, O_rA, 0},
+ 0, "sth", H_RA0_IS_0 },
+ { D_OPCODE(45), D_MASK, {O_rS, O_d, O_rA, 0},
+ 0, "sthu", 0 },
+ { D_OPCODE(46), D_MASK, {O_rD, O_d, O_rA, 0},
+ 0, "lmw", H_RA0_IS_0 },
+ { D_OPCODE(47), D_MASK, {O_rS, O_d, O_rA, 0},
+ 0, "stmw", H_RA0_IS_0 },
};
const unsigned int n_opcodes = sizeof(opcodes) / sizeof(opcodes[0]);
diff --git a/include/clps7111.h b/include/clps7111.h
index d122d84..baf6007 100644
--- a/include/clps7111.h
+++ b/include/clps7111.h
@@ -231,7 +231,7 @@
#define IO_RTCDR IO_WORD(RTCDR)
#define IO_RTCMR IO_WORD(RTCMR)
#define IO_PMPCON IO_WORD(PMPCON)
-#define IO_CODR IO_BYTE(CODR)
+#define IO_CODR IO_BYTE(CODR)
#define IO_UARTDR IO_WORD(UARTDR)
#define IO_UBRLCR IO_WORD(UBRLCR)
#define IO_SYNCIO IO_WORD(SYNCIO)
diff --git a/include/command.h b/include/command.h
index 0597c10..c3ef51d 100644
--- a/include/command.h
+++ b/include/command.h
@@ -74,7 +74,7 @@ extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *
* void function (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
*/
-typedef void command_t (cmd_tbl_t *, int, int, char *[]);
+typedef void command_t (cmd_tbl_t *, int, int, char *[]);
#endif /* __ASSEMBLY__ */
diff --git a/include/commproc.h b/include/commproc.h
index 32a3e1c..0a4e817 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -786,19 +786,19 @@ typedef struct scc_enet {
#undef SCC_ENET
#define FEC_ENET
-#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
-#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
-#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
-#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
-#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
-#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
-#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
-#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
-#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
-#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
-#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
-#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
-#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
+#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
+#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
+#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
+#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
+#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
+#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
+#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
+#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
+#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
+#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
+#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
+#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
+#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3-15 */
#endif /* CONFIG_GEN860T */
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index d1b5ffb..c2bb094 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -16,13 +16,13 @@
#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */
#define CONFIG_CMD_ASKENV /* ask for env variable */
#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
-#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BDI /* bdinfo */
#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
#define CONFIG_CMD_BMP /* BMP support */
#define CONFIG_CMD_BOOTD /* bootd */
#define CONFIG_CMD_BSP /* Board Specific functions */
#define CONFIG_CMD_CACHE /* icache, dcache */
-#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
+#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
#define CONFIG_CMD_CONSOLE /* coninfo */
#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
#define CONFIG_CMD_DHCP /* DHCP Support */
@@ -71,7 +71,7 @@
#define CONFIG_CMD_SAVES /* save S record dump */
#define CONFIG_CMD_SCSI /* SCSI Support */
#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
-#define CONFIG_CMD_SETEXPR /* setexpr support */
+#define CONFIG_CMD_SETEXPR /* setexpr support */
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_CMD_SNTP /* SNTP support */
#define CONFIG_CMD_SPI /* SPI utility */
diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h
index f61cfc9..b556706 100644
--- a/include/config_cmd_default.h
+++ b/include/config_cmd_default.h
@@ -17,7 +17,7 @@
*/
#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
-#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BDI /* bdinfo */
#define CONFIG_CMD_BOOTD /* bootd */
#define CONFIG_CMD_CONSOLE /* coninfo */
#define CONFIG_CMD_ECHO /* echo arguments */
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index 0a9a1ff..dba1bf7 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -87,7 +87,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
@@ -95,9 +95,9 @@
* PCI stuff
*-----------------------------------------------------------------------
*/
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
@@ -120,11 +120,11 @@
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank on RCS#0 */
-#define CFG_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */
-#define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM
+#define CFG_FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank on RCS#0 */
+#define CFG_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */
+#define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM
#define CFG_FLASH_BANKS { CFG_FLASH_BASE0_PRELIM }
/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
@@ -170,7 +170,7 @@
* Definitions for initial stack pointer and data area
*/
-/* #define CFG_MONITOR_BASE TEXT_BASE */
+/* #define CFG_MONITOR_BASE TEXT_BASE */
/*#define CFG_GBL_DATA_SIZE 256*/
#define CFG_GBL_DATA_SIZE 128
#define CFG_INIT_RAM_ADDR 0x40000000
@@ -192,7 +192,7 @@
*/
#define CFG_ROMNAL 7
#define CFG_ROMFAL 11
-#define CFG_DBUS_SIZE 0x3
+#define CFG_DBUS_SIZE 0x3
/* Bit-field values for MCCR2.
*/
@@ -218,7 +218,7 @@
#define CFG_EXTROM 1
#define CFG_REGDIMM 0
-#define CFG_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+#define CFG_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
index c45c395..01ee72b 100644
--- a/include/configs/ADNPESC1.h
+++ b/include/configs/ADNPESC1.h
@@ -81,9 +81,9 @@
* appropriately -- this is very important if you plan to move your
* memory to another place as configured at this time !!!).
*
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
+ * -The heap is placed below the monitor.
+ * -Global data is placed below the heap.
+ * -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
diff --git a/include/configs/ADNPESC1_base_32.h b/include/configs/ADNPESC1_base_32.h
index 55210eb..c8428b4 100644
--- a/include/configs/ADNPESC1_base_32.h
+++ b/include/configs/ADNPESC1_base_32.h
@@ -370,10 +370,10 @@
#define CFG_NIOS_CPU_IDE_NUMS 2 /* number of IDE contr. */
#define CFG_NIOS_CPU_IDE0 0x00001000 /* IDE0 addr */
-#define CFG_NIOS_CPU_IDE0_IRQ 36 /* IRQ */
+#define CFG_NIOS_CPU_IDE0_IRQ 36 /* IRQ */
#define CFG_NIOS_CPU_IDE1 0x00001020 /* IDE1 addr */
-#define CFG_NIOS_CPU_IDE1_IRQ 37 /* IRQ */
+#define CFG_NIOS_CPU_IDE1_IRQ 37 /* IRQ */
/* memory accessibility */
#undef CFG_NIOS_CPU_SRAM_BASE /* board SRAM addr */
diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h
index 6f64038..035ebc6 100644
--- a/include/configs/AMX860.h
+++ b/include/configs/AMX860.h
@@ -115,7 +115,7 @@
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
#define CFG_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */
-#define CFG_LOAD_ADDR 0x00100000
+#define CFG_LOAD_ADDR 0x00100000
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 8ad33f1..02f0c76 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -36,7 +36,7 @@
*/
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_APCG405 1 /* ...on a APC405 board */
+#define CONFIG_APCG405 1 /* ...on a APC405 board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_BOARD_EARLY_INIT_R 1
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 50f09b0..0602381 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -208,7 +208,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR 0xFFFB0000 /* Address of Environment Sector*/
#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
-#define CFG_ENV_SIZE 0x04000 /* Size of Environment */
+#define CFG_ENV_SIZE 0x04000 /* Size of Environment */
#define CFG_ENV_ADDR_REDUND 0xFFFA0000
#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
index 0d644da..f05c1d5 100644
--- a/include/configs/ATUM8548.h
+++ b/include/configs/ATUM8548.h
@@ -55,7 +55,7 @@
#define CONFIG_TSEC_ENET 1 /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for DDR setup*/
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for DDR setup*/
#undef CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
#define CONFIG_DDR_ECC /* only for ECC DDR module */
@@ -84,7 +84,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#define CONFIG_CMD_SDRAM 1 /* SDRAM DIMM SPD info printout */
+#define CONFIG_CMD_SDRAM 1 /* SDRAM DIMM SPD info printout */
#define CONFIG_ENABLE_36BIT_PHYS 1
#undef CFG_DRAM_TEST
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
@@ -276,7 +276,7 @@
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#if defined(CONFIG_PCI)
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index 8a76c26..7389c38 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -149,7 +149,7 @@
/* Environment is in flash */
#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CONFIG_ENV_OVERWRITE
@@ -191,16 +191,16 @@
#define CFG_TBSCR (TBSCR_TBF | TBSCR_TBE)
/* PISCR - Periodic Interrupt Status and Control */
-#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
/* PLPRCR - PLL, Low-Power, and Reset Control Register */
-/* #define CFG_PLPRCR PLPRCR_TEXPS */
+/* #define CFG_PLPRCR PLPRCR_TEXPS */
/* SCCR - System Clock and reset Control Register */
-#define SCCR_MASK SCCR_EBDF11
+#define SCCR_MASK SCCR_EBDF11
#define CFG_SCCR SCCR_RTSEL
-#define CFG_DER 0
+#define CFG_DER 0
/*-----------------------------------------------------------------------
* Cache Configuration
diff --git a/include/configs/B2.h b/include/configs/B2.h
index f1411db..d6ab1ad 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -37,7 +37,7 @@
#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
#define CONFIG_B2 1 /* on an B2 Board */
#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/
diff --git a/include/configs/CCM.h b/include/configs/CCM.h
index 9f06957..6194c5c 100644
--- a/include/configs/CCM.h
+++ b/include/configs/CCM.h
@@ -137,7 +137,7 @@
#define CFG_LOAD_ADDR 0x00100000 /* default load address */
/* Ethernet hardware configuration done using port pins */
-#define CFG_PA_ETH_RESET 0x0200 /* PA 6 */
+#define CFG_PA_ETH_RESET 0x0200 /* PA 6 */
#define CFG_PA_ETH_MDDIS 0x4000 /* PA 1 */
#define CFG_PB_ETH_POWERDOWN 0x00000800 /* PB 20 */
#define CFG_PB_ETH_CFG1 0x00000400 /* PB 21 */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index 9763e64..10cebc9 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -115,9 +115,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
/*-----------------------------------------------------------------------
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 2356858..604779a 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -130,16 +130,16 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_LOAD_ADDR 0x100000/* where to load what we get from TFTP */
+#define CFG_LOAD_ADDR 0x100000 /* where to load what we get from TFTP */
#define CFG_TFTP_LOADADDR CFG_LOAD_ADDR
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_DRAM_TEST 1
/*-----------------------------------------------------------------------
@@ -218,7 +218,7 @@
#else
#define CFG_OCM_DATA_ADDR 0xF0000000
#define CFG_OCM_DATA_SIZE 0x1000
-#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index 8b50087..f36d8da 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -305,7 +305,7 @@
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
-#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP
#define CONFIG_TULIP_USE_IO
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index eb78080..fb06689 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -76,9 +76,9 @@
* a memory resource (so you must make sure TEXT_BASE is chosen
* appropriately).
*
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
+ * -The heap is placed below the monitor.
+ * -Global data is placed below the heap.
+ * -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index bd36071..7a9ef79 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -84,9 +84,9 @@
* a memory resource (so you must make sure TEXT_BASE is chosen
* appropriately).
*
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
+ * -The heap is placed below the monitor.
+ * -Global data is placed below the heap.
+ * -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
diff --git a/include/configs/DK1S10_mtx_ldk_20.h b/include/configs/DK1S10_mtx_ldk_20.h
index 4eb9629..0115699 100644
--- a/include/configs/DK1S10_mtx_ldk_20.h
+++ b/include/configs/DK1S10_mtx_ldk_20.h
@@ -147,7 +147,7 @@
/* IDE i/f */
#define CFG_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
#define CFG_NIOS_CPU_IDE0 0x00000900 /* IDE0 addr */
-#define CFG_NIOS_CPU_IDE0_IRQ 25 /* IRQ */
+#define CFG_NIOS_CPU_IDE0_IRQ 25 /* IRQ */
/* memory accessibility */
#undef CFG_NIOS_CPU_SRAM_BASE /* board SRAM addr */
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index d54da97..0f5f85c 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -375,11 +375,11 @@ int du440_phy_addr(int devnum);
#define CFG_FLASH CFG_FLASH_BASE
#define CFG_CPLD_BASE 0xC0000000
-#define CFG_CPLD_RANGE 0x00000010
+#define CFG_CPLD_RANGE 0x00000010
#define CFG_DUMEM_BASE 0xC0100000
-#define CFG_DUMEM_RANGE 0x00100000
+#define CFG_DUMEM_RANGE 0x00100000
#define CFG_DUIO_BASE 0xC0200000
-#define CFG_DUIO_RANGE 0x00010000
+#define CFG_DUIO_RANGE 0x00010000
#define CFG_NAND0_CS 2 /* NAND chip connected to CSx */
#define CFG_NAND1_CS 3 /* NAND chip connected to CSx */
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 5ba7585..417099e 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -95,7 +95,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
@@ -157,7 +157,7 @@
*/
#define CFG_INIT_RAM_ADDR 0x20000000
#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
@@ -219,13 +219,13 @@
#define CFG_CS0_BASE CFG_FLASH_BASE
#define CFG_CS0_SIZE 2*1024*1024
#define CFG_CS0_WIDTH 16
-#define CFG_CS0_RO 0
+#define CFG_CS0_RO 0
#define CFG_CS0_WS 6
#define CFG_CS3_BASE 0xE0000000
#define CFG_CS3_SIZE 1*1024*1024
#define CFG_CS3_WIDTH 16
-#define CFG_CS3_RO 0
+#define CFG_CS3_RO 0
#define CFG_CS3_WS 6
/*-----------------------------------------------------------------------
@@ -250,7 +250,7 @@
#define CFG_PEHLPAR 0xC0
#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */
#define CFG_DDRUA 0x05
-#define CFG_PJPAR 0xFF;
+#define CFG_PJPAR 0xFF;
/*-----------------------------------------------------------------------
* CCM configuration
diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h
index c2ab18a..7824b90 100644
--- a/include/configs/EP88x.h
+++ b/include/configs/EP88x.h
@@ -144,7 +144,7 @@
/* Environment is in flash */
#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x20000 /* We use one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* We use one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_OR0_PRELIM 0xFC000160
@@ -192,13 +192,13 @@
#define CFG_TBSCR (TBSCR_TBF | TBSCR_TBE)
/* PISCR - Periodic Interrupt Status and Control */
-#define CFG_PISCR PISCR_PS
+#define CFG_PISCR PISCR_PS
/* SCCR - System Clock and reset Control Register */
-#define SCCR_MASK SCCR_EBDF11
+#define SCCR_MASK SCCR_EBDF11
#define CFG_SCCR SCCR_RTSEL
-#define CFG_DER 0
+#define CFG_DER 0
/*-----------------------------------------------------------------------
* Cache Configuration
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index dc15b0c..bfdcf6a 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -330,7 +330,7 @@
* BR0/1 and OR0/1 (FLASH)
*/
-#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 8MB */
+#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 8MB */
#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h
index ed439b1..525051f 100644
--- a/include/configs/ETX094.h
+++ b/include/configs/ETX094.h
@@ -51,7 +51,7 @@
#define CONFIG_BOARD_TYPES 1 /* support board types */
#define CONFIG_FLASH_16BIT /* for board with 16bit wide flash */
-#undef SB_ETX094 /* only for SB-Board with 16MB SDRAM */
+#undef SB_ETX094 /* only for SB-Board with 16MB SDRAM */
#define CONFIG_BOOTP_RANDOM_DELAY /* graceful BOOTP recovery mode */
#define CONFIG_ETHADDR 08:00:06:00:00:00
diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h
index 1c44a0c..c9d8c27 100644
--- a/include/configs/EVB64260.h
+++ b/include/configs/EVB64260.h
@@ -42,7 +42,7 @@
#define CONFIG_EVB64260 1 /* this is an EVB64260 board */
#define CFG_GT_6426x GT_64260 /* with a 64260 system controller */
-#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
+#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
#undef CONFIG_ECC /* enable ECC support */
/* #define CONFIG_EVB64260_750CX 1 */ /* Support the EVB-64260-750CX Board */
@@ -91,7 +91,7 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp && " \
+ "bootp && " \
"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:" \
"$netmask:$hostname:eth0:none; && " \
@@ -412,10 +412,10 @@
#define CFG_L2
#ifdef CONFIG_750CX
-#define L2_INIT 0
+#define L2_INIT 0
#else
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
+#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
#endif
#define L2_ENABLE (L2_INIT | L2CR_L2E)
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index 251227c..99d1cf25 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -33,7 +33,7 @@
* (easy to change)
*/
-#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
+#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
#define CONFIG_EXBITGEN 1 /* on a Exbit Generic board */
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index 86cbe58..6f3e6a7 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -93,10 +93,10 @@
#define CONFIG_LOADS_ECHO 0 /* Dont echoes received characters */
#define CONFIG_BOOTARGS ""
#define CONFIG_BOOTCOMMAND \
-"bootp ;" \
-"setenv bootargs console=tty0 console=ttyS0 " \
-"root=/dev/nfs nfsroot=${serverip}:${rootpath} " \
-"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off ;" \
+"bootp ;" \
+"setenv bootargs console=tty0 console=ttyS0 " \
+"root=/dev/nfs nfsroot=${serverip}:${rootpath} " \
+"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off ;" \
"bootm"
#else
#define CONFIG_BOOTDELAY 0 /* autoboot disabled */
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index c8b5a6d..037b115 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -39,9 +39,9 @@
* Identify the board
*/
#if !defined(CONFIG_SC)
-#define CONFIG_IDENT_STRING " B2"
+#define CONFIG_IDENT_STRING " B2"
#else
-#define CONFIG_IDENT_STRING " SC"
+#define CONFIG_IDENT_STRING " SC"
#endif
/*
@@ -50,26 +50,26 @@
* generated by the DS1337 - and the DS1337 clock can be turned off.
*/
#if !defined(CONFIG_SC)
-#define CONFIG_8xx_GCLK_FREQ 66600000
+#define CONFIG_8xx_GCLK_FREQ 66600000
#else
-#define CONFIG_8xx_GCLK_FREQ 48000000
+#define CONFIG_8xx_GCLK_FREQ 48000000
#endif
/*
* The RS-232 console port is on SMC1
*/
#define CONFIG_8xx_CONS_SMC1
-#define CONFIG_BAUDRATE 38400
+#define CONFIG_BAUDRATE 38400
/*
* Set allowable console baud rates
*/
-#define CFG_BAUDRATE_TABLE { 9600, \
- 19200, \
- 38400, \
- 57600, \
- 115200, \
- }
+#define CFG_BAUDRATE_TABLE { 9600, \
+ 19200, \
+ 38400, \
+ 57600, \
+ 115200, \
+ }
/*
* Print console information
@@ -148,7 +148,7 @@
#define CFG_DISCOVER_PHY
#define CONFIG_MII
#define CONFIG_MII_INIT 1
-#define CONFIG_PHY_ADDR 0
+#define CONFIG_PHY_ADDR 0
/*
* Set default IP stuff just to get bootstrap entries into the
@@ -172,7 +172,7 @@
* Enable I2C and select the hardware/software driver
*/
#define CONFIG_HARD_I2C 1 /* CPM based I2C */
-#undef CONFIG_SOFT_I2C /* Bit-banged I2C */
+#undef CONFIG_SOFT_I2C /* Bit-banged I2C */
#ifdef CONFIG_HARD_I2C
#define CFG_I2C_SPEED 100000 /* clock speed in Hz */
@@ -181,7 +181,7 @@
#ifdef CONFIG_SOFT_I2C
#define PB_SCL 0x00000020 /* PB 26 */
-#define PB_SDA 0x00000010 /* PB 27 */
+#define PB_SDA 0x00000010 /* PB 27 */
#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
@@ -388,7 +388,7 @@
*/
#define CFG_INIT_RAM_ADDR CFG_IMMR
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
-#define CFG_INIT_DATA_SIZE 64 /* # bytes reserved for initial data*/
+#define CFG_INIT_DATA_SIZE 64 /* # bytes reserved for initial data*/
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
@@ -480,18 +480,18 @@
*/
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR ( SYPCR_SWTC | \
- SYPCR_BMT | \
- SYPCR_BME | \
- SYPCR_SWF | \
- SYPCR_SWE | \
+ SYPCR_BMT | \
+ SYPCR_BME | \
+ SYPCR_SWF | \
+ SYPCR_SWE | \
SYPCR_SWRI | \
SYPCR_SWP \
)
#else
#define CFG_SYPCR ( SYPCR_SWTC | \
- SYPCR_BMT | \
- SYPCR_BME | \
- SYPCR_SWF | \
+ SYPCR_BMT | \
+ SYPCR_BME | \
+ SYPCR_SWF | \
SYPCR_SWP \
)
#endif
@@ -557,18 +557,18 @@
#define SCCR_MASK SCCR_EBDF11
#if !defined(CONFIG_SC)
-#define CFG_SCCR ( SCCR_TBS | /* timebase = GCLK/2 */ \
- SCCR_COM00 | /* full strength CLKOUT */ \
- SCCR_DFSYNC00 | /* SYNCLK / 1 (normal) */ \
- SCCR_DFBRG00 | /* BRGCLK / 1 (normal) */ \
+#define CFG_SCCR ( SCCR_TBS | /* timebase = GCLK/2 */ \
+ SCCR_COM00 | /* full strength CLKOUT */ \
+ SCCR_DFSYNC00 | /* SYNCLK / 1 (normal) */ \
+ SCCR_DFBRG00 | /* BRGCLK / 1 (normal) */ \
SCCR_DFNL000 | \
SCCR_DFNH000 \
)
#else
-#define CFG_SCCR ( SCCR_TBS | /* timebase = GCLK/2 */ \
- SCCR_COM00 | /* full strength CLKOUT */ \
- SCCR_DFSYNC00 | /* SYNCLK / 1 (normal) */ \
- SCCR_DFBRG00 | /* BRGCLK / 1 (normal) */ \
+#define CFG_SCCR ( SCCR_TBS | /* timebase = GCLK/2 */ \
+ SCCR_COM00 | /* full strength CLKOUT */ \
+ SCCR_DFSYNC00 | /* SYNCLK / 1 (normal) */ \
+ SCCR_DFBRG00 | /* BRGCLK / 1 (normal) */ \
SCCR_DFNL000 | \
SCCR_DFNH000 | \
SCCR_RTDIV | \
@@ -614,7 +614,7 @@
#define CFG_BR0_PRELIM ( (FLASH_BASE0_PRELIM & BR_BA_MSK) | \
BR_MS_GPCM | \
BR_PS_8 | \
- BR_V \
+ BR_V \
)
/*
@@ -626,9 +626,9 @@
)
#define CFG_BR1 ( (SDRAM_BASE & BR_BA_MSK) | \
- BR_MS_UPMA | \
- BR_PS_32 | \
- BR_V \
+ BR_MS_UPMA | \
+ BR_PS_32 | \
+ BR_V \
)
/*
@@ -646,9 +646,9 @@
* MAMR settings for SDRAM
*/
#define CFG_MAMR_8COL ( (CFG_MAMR_PTA << MAMR_PTA_SHIFT) | \
- MAMR_PTAE | \
+ MAMR_PTAE | \
MAMR_AMA_TYPE_1 | \
- MAMR_DSA_1_CYCL | \
+ MAMR_DSA_1_CYCL | \
MAMR_G0CLA_A10 | \
MAMR_RLFA_1X | \
MAMR_WLFA_1X | \
@@ -660,7 +660,7 @@
* 33 MHz bus with TRLX=1, ACS=11, CSNT=1, EBDF=1, SCY=2, EHTR=1,
* no burst.
*/
-#define CFG_OR2_PRELIM ( (0xffff0000 & OR_AM_MSK) | \
+#define CFG_OR2_PRELIM ( (0xffff0000 & OR_AM_MSK) | \
OR_CSNT_SAM | \
OR_ACS_DIV2 | \
OR_BI | \
@@ -685,20 +685,20 @@
*/
#define CFG_OR3_PRELIM ( (0xfc000000 & OR_AM_MSK) | \
OR_SCY_15_CLK | \
- OR_BI \
+ OR_BI \
)
#define CFG_BR3_PRELIM ( (FPGA_BASE & BR_BA_MSK) | \
BR_PS_32 | \
BR_MS_GPCM | \
- BR_V \
+ BR_V \
)
/*
* CS4* configuration for FPGA SelectMap configuration interface.
* 33 MHz bus, UPMB, no burst. Do not assert GPLB5 on falling edge
* of GCLK1_50
*/
-#define CFG_OR4_PRELIM ( (0xffff0000 & OR_AM_MSK) | \
+#define CFG_OR4_PRELIM ( (0xffff0000 & OR_AM_MSK) | \
OR_G5LS | \
OR_BI \
)
@@ -706,7 +706,7 @@
#define CFG_BR4_PRELIM ( (SELECTMAP_BASE & BR_BA_MSK) | \
BR_PS_8 | \
BR_MS_UPMB | \
- BR_V \
+ BR_V \
)
/*
@@ -728,7 +728,7 @@
#define CFG_BR5_PRELIM ( (M1553_BASE & BR_BA_MSK) | \
BR_PS_16 | \
BR_MS_GPCM | \
- BR_V \
+ BR_V \
)
/*
@@ -760,5 +760,3 @@
#endif
#endif /* __CONFIG_GEN860T_H */
-
-/* vim: set ts=4 tw=78 ai shiftwidth=4: */
diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h
index 3a660ed..f6d6ae0 100644
--- a/include/configs/GENIETV.h
+++ b/include/configs/GENIETV.h
@@ -80,10 +80,10 @@
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 9600
-#define MPC8XX_FACT 12 /* Multiply by 12 */
-#define MPC8XX_XIN 5000000 /* 4 MHz clock */
+#define MPC8XX_FACT 12 /* Multiply by 12 */
+#define MPC8XX_XIN 5000000 /* 4 MHz clock */
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
+#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
#define CFG_PLPRCR_MF ((MPC8XX_FACT-1) << 20)
#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ /* Force it - dont measure it */
@@ -95,9 +95,9 @@
#define CONFIG_BOOTARGS ""
#define CONFIG_BOOTCOMMAND \
"bootp; tftp; " \
-"setenv bootargs console=tty0 console=ttyS0 " \
-"root=/dev/nfs nfsroot=${serverip}:${rootpath} " \
-"ip=${ipaddr}:${serverip}:${gatewayip}:${subnetmask}:${hostname}:eth0:off ;" \
+"setenv bootargs console=tty0 console=ttyS0 " \
+"root=/dev/nfs nfsroot=${serverip}:${rootpath} " \
+"ip=${ipaddr}:${serverip}:${gatewayip}:${subnetmask}:${hostname}:eth0:off ;" \
"bootm "
#else
#define CONFIG_BOOTDELAY 0 /* autoboot disabled */
@@ -197,7 +197,7 @@
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
+#define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector (64k)*/
/* values according to the manual */
@@ -291,15 +291,15 @@
#define FLASH_BASE0_PRELIM 0x02800000 /* FLASH bank #0 */
-#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
+#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask (512Kb) */
/* FLASH timing */
-#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
+#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
OR_SCY_15_CLK | OR_TRLX )
/*#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) */
-#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 0xfff80ff4 */
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 0xfff80ff4 */
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8) /* 0x02800401 */
/*
diff --git a/include/configs/GTH.h b/include/configs/GTH.h
index 79f5714..00e09f7 100644
--- a/include/configs/GTH.h
+++ b/include/configs/GTH.h
@@ -135,7 +135,7 @@
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
/* Default location to load data from net */
-#define CFG_LOAD_ADDR 0x100000
+#define CFG_LOAD_ADDR 0x100000
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
@@ -196,7 +196,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#undef CFG_ENV_IS_IN_EEPROM
#define CFG_ENV_OFFSET 0x000E0000
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x50000 /* see README - env sector total size */
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 18e5b3c..8ea1ac3 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -41,7 +41,7 @@
#define CONFIG_405EP 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_HH405 1 /* ...on a HH405 board */
+#define CONFIG_HH405 1 /* ...on a HH405 board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index 7f3f16d..87827ea 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -70,15 +70,15 @@
#undef CONFIG_BOOTARGS
/* #define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
+ "bootp;" \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
+ "bootm"
*/
#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/nfs" \
- "ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; " \
+ "setenv bootargs root=/dev/nfs" \
+ "ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; " \
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -159,7 +159,7 @@
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-#define CFG_LOAD_ADDR 0x00100000
+#define CFG_LOAD_ADDR 0x00100000
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index 9c88d7c..f693956 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -72,9 +72,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
+ "bootp;" \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
"bootm"
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -164,7 +164,7 @@
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-#define CFG_LOAD_ADDR 0x00100000
+#define CFG_LOAD_ADDR 0x00100000
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index bb2c96a..7d564a0 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -274,7 +274,7 @@
* HID1 has only read-only information - nothing to set.
*/
#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
- HID0_IFEM|HID0_ABE)
+ HID0_IFEM|HID0_ABE)
#define CFG_HID0_FINAL (HID0_IFEM|HID0_ABE)
#define CFG_HID2 0
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 965b515..760f7cc 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -186,7 +186,7 @@
/* Environment is in flash, there is little space left in Serial EEPROM */
#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index 1142f2a..0ffdfac 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -205,7 +205,7 @@
# if defined (CONFIG_IVML24_16M)
# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
# elif defined (CONFIG_IVML24_32M)
# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
SYPCR_SWE | SYPCR_SWP)
@@ -265,7 +265,7 @@
/* 0x01800014 */
#define CFG_SCCR (SCCR_COM01 | /*SCCR_TBS|*/ \
SCCR_RTDIV | SCCR_RTSEL | \
- /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
+ /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
SCCR_EBDF00 | SCCR_DFSYNC00 | \
SCCR_DFBRG00 | SCCR_DFNL000 | \
SCCR_DFNH000 | SCCR_DFLCD101 | \
@@ -458,8 +458,8 @@
#if defined (CONFIG_IVML24_16M)
/* 8 column SDRAM */
# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
- MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
- MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVML24_32M)
/* 128 MBit SDRAM */
# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index bd19dad..ea3ffe0 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -200,7 +200,7 @@
#if defined(CONFIG_WATCHDOG)
# if defined (CONFIG_IVMS8_16M)
# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
# elif defined (CONFIG_IVMS8_32M)
# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
SYPCR_SWE | SYPCR_SWP)
@@ -259,7 +259,7 @@
/* 0x01800014 */
#define CFG_SCCR (SCCR_COM01 | /*SCCR_TBS|*/ \
SCCR_RTDIV | SCCR_RTSEL | \
- /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
+ /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
SCCR_EBDF00 | SCCR_DFSYNC00 | \
SCCR_DFBRG00 | SCCR_DFNL000 | \
SCCR_DFNH000 | SCCR_DFLCD101 | \
@@ -440,8 +440,8 @@
#if defined (CONFIG_IVMS8_16M)
/* 8 column SDRAM */
# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
- MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
- MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVMS8_32M)
/* 128 MBit SDRAM */
#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 38a0226..f85cff7 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -172,9 +172,9 @@
* IPB Bus clocking configuration.
*/
#if defined(CONFIG_LITE5200B)
-#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#else
-#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
#endif /* CONFIG_MPC5200 */
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 3ee2b39..8af1c52 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -84,7 +84,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index e1cc720..a6fac4c 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -95,7 +95,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 2b8734b..7edd322 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -97,7 +97,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 826778c..df46ee4 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -82,7 +82,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
@@ -215,13 +215,13 @@
#define CFG_CS0_BASE CFG_FLASH_BASE
#define CFG_CS0_SIZE 2*1024*1024
#define CFG_CS0_WIDTH 16
-#define CFG_CS0_RO 0
+#define CFG_CS0_RO 0
#define CFG_CS0_WS 6
/*
#define CFG_CS3_BASE 0xE0000000
#define CFG_CS3_SIZE 1*1024*1024
#define CFG_CS3_WIDTH 16
-#define CFG_CS3_RO 0
+#define CFG_CS3_RO 0
#define CFG_CS3_WS 6
*/
/*-----------------------------------------------------------------------
@@ -246,6 +246,6 @@
#define CFG_PEHLPAR 0xC0
#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */
#define CFG_DDRUA 0x05
-#define CFG_PJPAR 0xFF;
+#define CFG_PJPAR 0xFF;
#endif /* _CONFIG_M5282EVB_H */
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 42692d6..b30d99c 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -77,7 +77,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 3b9da17..a710c6d 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -77,7 +77,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index fea7551..a19c342 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -83,7 +83,7 @@
# define CFG_FEC1_PINMUX 0
# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 454d0a2..b73e2e0 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -83,7 +83,7 @@
# define CFG_FEC1_PINMUX 0
# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 9ddf82b..d683b87 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -123,7 +123,7 @@
* (to get SDRAM settings)
***************************************************************/
/*#define SDRAM_EEPROM_WRITE_ADDRESS 0xA0
-#define SDRAM_EEPROM_READ_ADDRESS 0xA1
+#define SDRAM_EEPROM_READ_ADDRESS 0xA1
*/
/**************************************************************
* Environment definitions
@@ -132,7 +132,7 @@
#define CONFIG_BOOTDELAY 5
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
@@ -260,7 +260,7 @@
/*-----------------------------------------------------------------------
* Logbuffer Configuration
*/
-#undef CONFIG_LOGBUFFER /* supported but not enabled */
+#undef CONFIG_LOGBUFFER /* supported but not enabled */
/*-----------------------------------------------------------------------
* Bootcountlimit Configuration
*/
@@ -271,8 +271,8 @@
*/
#if 0 /* enable this if POST is desired (is supported but not enabled) */
#define CONFIG_POST (CFG_POST_MEMORY | \
- CFG_POST_CPU | \
- CFG_POST_RTC | \
+ CFG_POST_CPU | \
+ CFG_POST_RTC | \
CFG_POST_I2C)
#endif
@@ -292,7 +292,7 @@
#define PER_UART1_ADDR 0xF4200000 /* smallest window is 1MByte 0x10 0000*/
#define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
-#define CONFIG_PORT_ADDR PER_PLD_ADDR + 5
+#define CONFIG_PORT_ADDR PER_PLD_ADDR + 5
/*-----------------------------------------------------------------------
@@ -301,7 +301,7 @@
#define CFG_TEMP_STACK_OCM 1
#define CFG_OCM_DATA_ADDR 0xF0000000
#define CFG_OCM_DATA_SIZE 0x1000
-#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
@@ -362,7 +362,7 @@
#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
#define CFG_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */
#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */
-#define CFG_ATA_REG_OFFSET 0 /* reg offset */
+#define CFG_ATA_REG_OFFSET 0 /* reg offset */
#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h
index 9370c24..021729b 100644
--- a/include/configs/MOUSSE.h
+++ b/include/configs/MOUSSE.h
@@ -265,18 +265,18 @@
#else
#define CFG_IBAT1L (PORTX_DEV_BASE | BATL_PP_10 |BATL_CACHEINHIBIT)
#endif
-#define CFG_DBAT1U CFG_IBAT1U
-#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT1L CFG_IBAT1L
/* PCI Memory region 1: 0x8XXX_XXXX PCI Mem space: EUMBAR, etc - 16MB */
-#define CFG_IBAT2U (PCI_MEM_SPACE1_START|BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L (PCI_MEM_SPACE1_START|BATL_PP_10 | BATL_GUARDEDSTORAGE|BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (PCI_MEM_SPACE1_START|BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (PCI_MEM_SPACE1_START|BATL_PP_10 | BATL_GUARDEDSTORAGE|BATL_CACHEINHIBIT)
#define CFG_DBAT2U CFG_IBAT2U
#define CFG_DBAT2L CFG_IBAT2L
/* PCI Memory region 2: PCI Devices in 0xFD space */
-#define CFG_IBAT3U (PCI_MEM_SPACE2_START|BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_IBAT3L (PCI_MEM_SPACE2_START|BATL_PP_10 | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (PCI_MEM_SPACE2_START|BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L (PCI_MEM_SPACE2_START|BATL_PP_10 | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
#define CFG_DBAT3U CFG_IBAT3U
#define CFG_DBAT3L CFG_IBAT3L
@@ -299,7 +299,7 @@
#if 0
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x8000 /* Offset of the Environment Sector */
+#define CFG_ENV_OFFSET 0x8000 /* Offset of the Environment Sector */
#define CFG_ENV_SIZE 0x4000 /* Size of the Environment Sector */
#else
#define CFG_ENV_IS_IN_NVRAM 1
@@ -339,7 +339,7 @@
#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
-#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index f9fa535..610151f 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -217,7 +217,7 @@
| (0xFF << LBCR_BMT_SHIFT) \
| 0xF ) /* 0x0004ff0f */
-#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */
+#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */
/* drivers/mtd/nand/nand.c */
#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */
@@ -549,28 +549,28 @@
#define MK_STR(x) XMK_STR(x)
#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
"ethprime=TSEC1\0" \
- "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
- "tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
"fdtaddr=400000\0" \
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
"console=ttyS0\0" \
"setbootargs=setenv bootargs " \
"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
- "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
+ "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"root=$rootdev rw console=$console,$baudrate $othbootargs\0"
#define CONFIG_NFSBOOTCOMMAND \
"setenv rootdev /dev/nfs;" \
- "run setbootargs;" \
- "run setipargs;" \
+ "run setbootargs;" \
+ "run setipargs;" \
"tftp $loadaddr $bootfile;" \
"tftp $fdtaddr $fdtfile;" \
"bootm $loadaddr - $fdtaddr"
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index ddefa5e..1276a12 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -574,7 +574,7 @@
#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index cf552c2..119e7ac 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -39,7 +39,7 @@
#define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */
#undef CONFIG_PCI
-#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
+#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
#define PCI_66M
#ifdef PCI_66M
@@ -414,7 +414,7 @@
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xFIXME
#define PCI_ENET0_MEMADDR 0xFIXME
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index be8850a..c72de03 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -149,8 +149,8 @@
* DDR Setup
*/
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
-#define CFG_SDRAM_BASE CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
#define CFG_83XX_DDR_USES_CS0
#define CFG_MEMTEST_START 0x1000 /* memtest region */
#define CFG_MEMTEST_END 0x2000
@@ -187,7 +187,7 @@
boards, we say we have two, but don't display a message if we find only one. */
#define CFG_FLASH_QUIET_TEST
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
-#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
#define CFG_FLASH_SIZE 16 /* FLASH size in MB */
#define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */
@@ -671,21 +671,21 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_BOOTARGS \
"root=/dev/nfs rw" \
" nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \
- " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
+ " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
" console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=" MK_STR(CONFIG_CONSOLE) "\0" \
- "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
- "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
- "tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "console=" MK_STR(CONFIG_CONSOLE) "\0" \
+ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
"fdtaddr=400000\0" \
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index a4f6af6..7b7d6f5 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -535,11 +535,11 @@
"ubootfile=u-boot.bin\0"\
"mtdparts=mtdparts=60000000.nand-flash:4096k(kernel),128k(dtb),-(rootfs)\0"\
"setbootargs=setenv bootargs console=$consoledev,$baudrate "\
- "$mtdparts panic=1\0"\
+ "$mtdparts panic=1\0"\
"adddhcpargs=setenv bootargs $bootargs ip=on\0"\
"addnfsargs=setenv bootargs $bootargs ip=$ipaddr:$serverip:"\
- "$gatewayip:$netmask:$hostname:$netdev:off "\
- "root=/dev/nfs rw nfsroot=$serverip:$rootpath\0"\
+ "$gatewayip:$netmask:$hostname:$netdev:off "\
+ "root=/dev/nfs rw nfsroot=$serverip:$rootpath\0"\
"addnandargs=setenv bootargs $bootargs root=/dev/mtdblock3 "\
"rootfstype=jffs2 rw\0"\
"tftp_get_uboot=tftp 100000 $ubootfile\0"\
@@ -555,7 +555,7 @@
"nand_read_kernel=nand read.jffs2 $loadaddr 0 400000\0"\
"nand_read_dtb=nand read.jffs2 $fdtaddr 400000 20000\0"\
"nor_reflash=protect off ff800000 ff87ffff ; erase ff800000 ff87ffff ; "\
- "cp.b 100000 ff800000 $filesize\0"\
+ "cp.b 100000 ff800000 $filesize\0"\
"nand_reflash_kernel=run tftp_get_kernel nand_erase_kernel "\
"nand_write_kernel\0"\
"nand_reflash_dtb=run tftp_get_dtb nand_erase_dtb nand_write_dtb\0"\
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 85934d7..5719759 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -46,7 +46,7 @@
#endif
#define CONFIG_PCI
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
@@ -98,7 +98,7 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -147,7 +147,7 @@
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
@@ -268,16 +268,16 @@
#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000)
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
@@ -337,7 +337,7 @@
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -345,7 +345,7 @@
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
@@ -357,7 +357,7 @@
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 77eea73..b13c81c 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -30,14 +30,14 @@
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
-#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_BOOKE 1 /* BOOKE */
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
#define CONFIG_MPC8540 1 /* MPC8540 specific */
#define CONFIG_MPC8540EVAL 1 /* MPC8540EVAL board specific */
-#undef CONFIG_PCI /* pci ethernet support */
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#undef CONFIG_PCI /* pci ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
@@ -63,7 +63,7 @@
#endif
/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
#undef CONFIG_BTB /* toggle branch predition */
#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */
@@ -81,8 +81,8 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -113,7 +113,7 @@
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/
#define CFG_FLASH_CFI 1
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
@@ -150,16 +150,16 @@
#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000)
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
-#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
@@ -168,7 +168,7 @@
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK get_bus_freq(0)
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
@@ -203,17 +203,17 @@
#define CONFIG_NET_MULTI
#undef CONFIG_EEPRO100
#define CONFIG_TULIP
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
-#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
+#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/
#endif
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
#define CFG_PCI_SUBSYS_DEVICEID 0x0008
#elif defined(CONFIG_TSEC_ENET)
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC1 1
#define CONFIG_HAS_ETH0
@@ -262,7 +262,7 @@
#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"
#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
+#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -318,7 +318,7 @@
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 3f3f741..5b3ea05 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -38,7 +38,7 @@
#define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */
#define CONFIG_PCI
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
@@ -69,7 +69,7 @@ extern unsigned long get_clock_freq(void);
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
@@ -83,7 +83,7 @@ extern unsigned long get_clock_freq(void);
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -155,7 +155,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -284,16 +284,16 @@ extern unsigned long get_clock_freq(void);
#define CFG_OR3_PRELIM 0xfff00ff7
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 2
@@ -362,7 +362,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_MPC85XX_PCI2
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -376,7 +376,7 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
@@ -455,7 +455,7 @@ extern unsigned long get_clock_freq(void);
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/*
* Internal Definitions
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 500b57c..e838345 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -38,7 +38,7 @@
#define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */
#define CONFIG_PCI
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL /* possible DLL fix needed */
@@ -69,7 +69,7 @@ extern unsigned long get_clock_freq(void);
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
@@ -83,7 +83,7 @@ extern unsigned long get_clock_freq(void);
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -155,7 +155,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -284,16 +284,16 @@ extern unsigned long get_clock_freq(void);
#define CFG_OR3_PRELIM 0xfff00ff7
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 2
@@ -361,7 +361,7 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_MPC85XX_PCI2
#undef CONFIG_EEPRO100
@@ -376,7 +376,7 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
@@ -455,7 +455,7 @@ extern unsigned long get_clock_freq(void);
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/*
* Internal Definitions
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index e30302c..9c95cc6 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -42,7 +42,7 @@
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */
#define CONFIG_PCI
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
@@ -93,7 +93,7 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -142,7 +142,7 @@
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
@@ -263,23 +263,23 @@
#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000)
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
#undef CONFIG_CONS_NONE /* define if console on something else */
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
@@ -325,7 +325,7 @@
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -333,7 +333,7 @@
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
@@ -345,7 +345,7 @@
#ifdef CONFIG_TSEC_ENET
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#ifndef CONFIG_MII
@@ -367,9 +367,9 @@
#endif /* CONFIG_TSEC_ENET */
-#ifdef CONFIG_ETHER_ON_FCC /* CPM FCC Ethernet */
+#ifdef CONFIG_ETHER_ON_FCC /* CPM FCC Ethernet */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
+#undef CONFIG_ETHER_NONE /* define if ether on something else */
#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
#if (CONFIG_ETHER_INDEX == 2)
@@ -387,7 +387,7 @@
#elif (CONFIG_ETHER_INDEX == 3)
/* need more definitions here for FE3 */
#define FETH3_RST 0x80
-#endif /* CONFIG_ETHER_INDEX */
+#endif /* CONFIG_ETHER_INDEX */
#ifndef CONFIG_MII
#define CONFIG_MII 1 /* MII PHY management */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 7bb20e5..a7c69d2 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -38,7 +38,7 @@
#define CONFIG_PCIE1 1 /* PCIE controller */
#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_QE /* Enable QE */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
@@ -68,7 +68,7 @@ extern unsigned long get_clock_freq(void);
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
@@ -88,7 +88,7 @@ extern unsigned long get_clock_freq(void);
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -166,7 +166,7 @@ extern unsigned long get_clock_freq(void);
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -184,10 +184,10 @@ extern unsigned long get_clock_freq(void);
#define CFG_BR2_PRELIM 0xf0001861
#define CFG_OR2_PRELIM 0xfc006901
-#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
-#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
-#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
+#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
+#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
+#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
/*
* LSDMR masks
@@ -267,16 +267,16 @@ extern unsigned long get_clock_freq(void);
#define CFG_OR5_PRELIM 0xffff69f7
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
@@ -350,7 +350,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_eTSEC_MDIO_BUS
#ifdef CONFIG_eTSEC_MDIO_BUS
-#define CONFIG_MIIM_ADDRESS 0xE0024520
+#define CONFIG_MIIM_ADDRESS 0xE0024520
#endif
#define CONFIG_UEC_ETH1 /* GETH1 */
@@ -379,7 +379,7 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -395,7 +395,7 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_PCI */
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#if defined(CONFIG_TSEC_ENET)
@@ -480,7 +480,7 @@ extern unsigned long get_clock_freq(void);
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/*
* Internal Definitions
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 585411c..15ff0ea 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -330,7 +330,7 @@
#define CONFIG_USB_KEYBOARD 1
#define CFG_DEVICE_DEREGISTER
#define CFG_USB_EVENT_POLL 1
-#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
+#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
#define CFG_OHCI_SWAP_REG_ACCESS 1
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index a8d0077..9acc3da 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -36,11 +36,11 @@
#define CONFIG_MPC86xx 1 /* MPC86xx */
#define CONFIG_MPC8641 1 /* MPC8641 specific */
#define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */
-#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */
-#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
+#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */
+#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
#ifdef RUN_DIAG
-#define CFG_DIAG_ADDR 0xff800000
+#define CFG_DIAG_ADDR 0xff800000
#endif
#define CFG_RESET_ADDRESS 0xfff00100
@@ -51,7 +51,7 @@
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_LAW 1 /* Use common FSL law init code */
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
@@ -61,14 +61,14 @@
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_NUM_DDR_CONTROLLERS 2
-/* #define CONFIG_DDR_INTERLEAVE 1 */
+/* #define CONFIG_DDR_INTERLEAVE 1 */
#define CACHE_LINE_INTERLEAVING 0x20000000
#define PAGE_INTERLEAVING 0x21000000
#define BANK_INTERLEAVING 0x22000000
#define SUPER_BANK_INTERLEAVING 0x23000000
-#define CONFIG_ALTIVEC 1
+#define CONFIG_ALTIVEC 1
/*
* L2CR setup -- make sure this is right for your board!
@@ -81,7 +81,7 @@
#ifndef __ASSEMBLY__
extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif
-#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
#endif
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
@@ -94,7 +94,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -127,18 +127,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_SDRAM_SIZE 256 /* DDR is 256MB */
#define CFG_DDR_CS0_BNDS 0x0000000F
- #define CFG_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */
+ #define CFG_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */
#define CFG_DDR_EXT_REFRESH 0x00000000
- #define CFG_DDR_TIMING_0 0x00260802
+ #define CFG_DDR_TIMING_0 0x00260802
#define CFG_DDR_TIMING_1 0x39357322
#define CFG_DDR_TIMING_2 0x14904cc8
#define CFG_DDR_MODE_1 0x00480432
#define CFG_DDR_MODE_2 0x00000000
#define CFG_DDR_INTERVAL 0x06090100
- #define CFG_DDR_DATA_INIT 0xdeadbeef
- #define CFG_DDR_CLK_CTRL 0x03800000
- #define CFG_DDR_OCD_CTRL 0x00000000
- #define CFG_DDR_OCD_STATUS 0x00000000
+ #define CFG_DDR_DATA_INIT 0xdeadbeef
+ #define CFG_DDR_CLK_CTRL 0x03800000
+ #define CFG_DDR_OCD_CTRL 0x00000000
+ #define CFG_DDR_OCD_STATUS 0x00000000
#define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */
#define CFG_DDR_CONTROL2 0x04400000
@@ -170,7 +170,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
*
* Note that, on switching the boot location, fef00000 becomes fff00000.
*/
-#define CFG_FLASH_BASE 0xfe800000 /* start of FLASH 32M */
+#define CFG_FLASH_BASE 0xfe800000 /* start of FLASH 32M */
#define CFG_FLASH_BASE2 0xff800000
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
@@ -189,7 +189,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */
-#define PIXIS_BASE 0xf8100000 /* PIXIS registers */
+#define PIXIS_BASE 0xf8100000 /* PIXIS registers */
#define PIXIS_ID 0x0 /* Board ID at offset 0 */
#define PIXIS_VER 0x1 /* Board version at offset 1 */
#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */
@@ -204,7 +204,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
-#define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/
+#define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
@@ -212,7 +212,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -221,7 +221,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#else
-#undef CFG_RAMBOOT
+#undef CFG_RAMBOOT
#endif
#if defined(CFG_RAMBOOT)
@@ -238,32 +238,32 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#else
#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */
#endif
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK get_bus_freq(0)
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
/* Use the HUSH parser */
#define CFG_HUSH_PARSER
-#ifdef CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
@@ -286,7 +286,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3100
/*
@@ -308,13 +308,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS 0x00000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x80000000
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
/* For RTL8139 */
#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
-#define _IO_BASE 0x00000000
+#define _IO_BASE 0x00000000
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
@@ -325,12 +325,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI)
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#undef CFG_SCSI_SCAN_BUS_REVERSE
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_RTL8139
@@ -340,19 +340,19 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/************************************************************
* USB support
************************************************************/
-#define CONFIG_PCI_OHCI 1
+#define CONFIG_PCI_OHCI 1
#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_USB_KEYBOARD 1
+#define CONFIG_USB_KEYBOARD 1
#define CFG_DEVICE_DEREGISTER
-#define CFG_USB_EVENT_POLL 1
-#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_USB_EVENT_POLL 1
+#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
#define CFG_OHCI_SWAP_REG_ACCESS 1
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
/*PCIE video card used*/
@@ -384,7 +384,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SATA_ULI5288
#define CFG_SCSI_MAX_SCSI_ID 4
#define CFG_SCSI_MAX_LUN 1
-#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
#endif
@@ -395,19 +395,19 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "eTSEC1"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "eTSEC2"
-#define CONFIG_TSEC3 1
-#define CONFIG_TSEC3_NAME "eTSEC3"
-#define CONFIG_TSEC4 1
-#define CONFIG_TSEC4_NAME "eTSEC4"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
+#define CONFIG_TSEC4 1
+#define CONFIG_TSEC4_NAME "eTSEC4"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
@@ -427,76 +427,76 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif /* CONFIG_TSEC_ENET */
/*
- * BAT0 2G Cacheable, non-guarded
- * 0x0000_0000 2G DDR
+ * BAT0 2G Cacheable, non-guarded
+ * 0x0000_0000 2G DDR
*/
-#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP)
-#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE )
-#define CFG_IBAT0U CFG_DBAT0U
+#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP)
+#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CFG_IBAT0U CFG_DBAT0U
/*
- * BAT1 1G Cache-inhibited, guarded
- * 0x8000_0000 512M PCI-Express 1 Memory
- * 0xa000_0000 512M PCI-Express 2 Memory
+ * BAT1 1G Cache-inhibited, guarded
+ * 0x8000_0000 512M PCI-Express 1 Memory
+ * 0xa000_0000 512M PCI-Express 2 Memory
* Changed it for operating from 0xd0000000
*/
-#define CFG_DBAT1L ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \
+#define CFG_DBAT1L ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U CFG_DBAT1U
+#define CFG_IBAT1U CFG_DBAT1U
/*
- * BAT2 512M Cache-inhibited, guarded
- * 0xc000_0000 512M RapidIO Memory
+ * BAT2 512M Cache-inhibited, guarded
+ * 0xc000_0000 512M RapidIO Memory
*/
-#define CFG_DBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW \
+#define CFG_DBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT2U (CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
#define CFG_IBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U CFG_DBAT2U
+#define CFG_IBAT2U CFG_DBAT2U
/*
- * BAT3 4M Cache-inhibited, guarded
- * 0xf800_0000 4M CCSR
+ * BAT3 4M Cache-inhibited, guarded
+ * 0xf800_0000 4M CCSR
*/
-#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \
+#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U CFG_DBAT3U
+#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U CFG_DBAT3U
/*
- * BAT4 32M Cache-inhibited, guarded
- * 0xe200_0000 16M PCI-Express 1 I/O
- * 0xe300_0000 16M PCI-Express 2 I/0
+ * BAT4 32M Cache-inhibited, guarded
+ * 0xe200_0000 16M PCI-Express 1 I/O
+ * 0xe300_0000 16M PCI-Express 2 I/0
* Note that this is at 0xe0000000
*/
-#define CFG_DBAT4L ( CFG_PCI1_IO_PHYS | BATL_PP_RW \
+#define CFG_DBAT4L ( CFG_PCI1_IO_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT4U (CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
#define CFG_IBAT4L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U CFG_DBAT4U
+#define CFG_IBAT4U CFG_DBAT4U
/*
- * BAT5 128K Cacheable, non-guarded
- * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory)
+ * BAT5 128K Cacheable, non-guarded
+ * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory)
*/
-#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_IBAT5L CFG_DBAT5L
-#define CFG_IBAT5U CFG_DBAT5U
+#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_IBAT5L CFG_DBAT5L
+#define CFG_IBAT5U CFG_DBAT5U
/*
- * BAT6 32M Cache-inhibited, guarded
- * 0xfe00_0000 32M FLASH
+ * BAT6 32M Cache-inhibited, guarded
+ * 0xfe00_0000 32M FLASH
*/
-#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
+#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U CFG_DBAT6U
+#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U CFG_DBAT6U
#define CFG_DBAT7L 0x00000000
#define CFG_DBAT7U 0x00000000
@@ -557,7 +557,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
@@ -598,7 +598,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR 00:E0:0C:00:00:01
+#define CONFIG_ETHADDR 00:E0:0C:00:00:01
#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
@@ -624,45 +624,45 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_LOADADDR 1000000
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_BAUDRATE 115200
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
- "tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=2000000\0" \
- "ramdiskfile=your.ramdisk.u-boot\0" \
- "fdtaddr=c00000\0" \
- "fdtfile=mpc8641_hpcn.dtb\0" \
- "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
- "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
- "maxcpus=2"
-
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=your.ramdisk.u-boot\0" \
+ "fdtaddr=c00000\0" \
+ "fdtfile=mpc8641_hpcn.dtb\0" \
+ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
+ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+ "maxcpus=2"
+
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
index 831cc5e..e0e8554 100644
--- a/include/configs/MPC86xADS.h
+++ b/include/configs/MPC86xADS.h
@@ -22,7 +22,7 @@
#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */
/* CPU type - pick one of these */
-#define CONFIG_MPC866T 1
+#define CONFIG_MPC866T 1
#undef CONFIG_MPC866P
#undef CONFIG_MPC859T
#undef CONFIG_MPC859DSL
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
index f8cf01e..4319e6c 100644
--- a/include/configs/MUSENKI.h
+++ b/include/configs/MUSENKI.h
@@ -86,7 +86,7 @@
* PCI stuff
*-----------------------------------------------------------------------
*/
-#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI /* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index d799f54..d08d795 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -28,16 +28,16 @@
#define MV_VERSION "v0.2.0"
/* LED0 = Power , LED1 = Error , LED2-5 = error code, LED6-7=00 -->PPCBoot error */
-#define ERR_NONE 0
-#define ERR_ENV 1
-#define ERR_BOOTM_BADMAGIC 2
-#define ERR_BOOTM_BADCRC 3
-#define ERR_BOOTM_GUNZIP 4
+#define ERR_NONE 0
+#define ERR_ENV 1
+#define ERR_BOOTM_BADMAGIC 2
+#define ERR_BOOTM_BADCRC 3
+#define ERR_BOOTM_GUNZIP 4
#define ERR_BOOTP_TIMEOUT 5
-#define ERR_DHCP 6
-#define ERR_TFTP 7
-#define ERR_NOLAN 8
-#define ERR_LANDRV 9
+#define ERR_DHCP 6
+#define ERR_TFTP 7
+#define ERR_NOLAN 8
+#define ERR_LANDRV 9
#define CONFIG_BOARD_TYPES 1
#define MVBLUE_BOARD_BOX 1
@@ -45,10 +45,10 @@
#if 0
#define ERR_LED(code) do { if (code) \
- *(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \
- else \
- *(volatile char *)(0xff000003) = ( 1 ); \
- } while(0)
+ *(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \
+ else \
+ *(volatile char *)(0xff000003) = ( 1 ); \
+} while(0)
#else
#define ERR_LED(code)
#endif
@@ -116,19 +116,19 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS 16 /* Max number of command args */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_MAXARGS 16 /* Max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
-#define CONFIG_BOOTCOMMAND "run nfsboot"
+#define CONFIG_BOOTCOMMAND "run nfsboot"
#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ro rootfstype=jffs2"
-#define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm"
+#define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console_nr=0\0" \
@@ -156,11 +156,11 @@
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_NET_MULTI
-#define CONFIG_NET_RETRY_COUNT 5
+#define CONFIG_NET_RETRY_COUNT 5
#define CONFIG_TULIP
#define CONFIG_TULIP_FIX_DAVICOM 1
-#define CONFIG_ETHADDR b6:b4:45:eb:fb:c0
+#define CONFIG_ETHADDR b6:b4:45:eb:fb:c0
#define CONFIG_HW_WATCHDOG
@@ -224,7 +224,7 @@
*/
#define CONFIG_SYS_CLK_FREQ 33000000
-#define CFG_HZ 10000
+#define CFG_HZ 10000
/* Bit-field values for MCCR1. */
#define CFG_ROMNAL 7
diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h
index 75efd1e..87458e3 100644
--- a/include/configs/MVS1.h
+++ b/include/configs/MVS1.h
@@ -43,16 +43,19 @@
#undef CONFIG_8xx_CONS_SMC1 /* Console is *NOT* on SMC1 */
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 115200 /* console baudrate */
+#define CONFIG_BAUDRATE 115200 /* console baudrate */
#define CONFIG_BOOTDELAY 5 /* autoboot after this many seconds */
-#define CONFIG_PREBOOT "echo;echo To mount root over NFS use \"run bootnet\";echo To mount root from FLASH use \"run bootflash\";echo"
+#define CONFIG_PREBOOT "echo;" \
+ "echo To mount root over NFS use \"run bootnet\";" \
+ "echo To mount root from FLASH use \"run bootflash\";" \
+ "echo"
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw"
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
+#define CONFIG_BOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
@@ -61,7 +64,7 @@
#undef CONFIG_STATUS_LED /* Status LED disabled/enabled */
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
+#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*
@@ -100,9 +103,9 @@
#undef CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#undef CFG_HUSH_PARSER /* Hush parse for U-Boot ?? */
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#undef CFG_HUSH_PARSER /* Hush parse for U-Boot ?? */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
#endif
#if defined(CONFIG_CMD_KGDB)
@@ -193,7 +196,7 @@
*/
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
#endif
@@ -267,8 +270,8 @@
#define CONFIG_IDE_PCCARD 0 /* **DON'T** Use IDE with PC Card Adapter */
-#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
#define CFG_IDE_MAXBUS 0 /* max. no. of IDE buses */
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index 5346545..0b09482 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -76,12 +76,12 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
+ "bootp;" \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
"bootm"
-#define CONFIG_WATCHDOG /* watchdog enabled */
+#define CONFIG_WATCHDOG /* watchdog enabled */
#undef CONFIG_STATUS_LED /* Status LED disabled */
@@ -175,7 +175,7 @@
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-#define CFG_LOAD_ADDR 0x00100000
+#define CFG_LOAD_ADDR 0x00100000
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index e3c6fd3..27e7ab9 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -66,7 +66,7 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
+ "tftpboot; " \
"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
"bootm"
@@ -97,7 +97,7 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
+#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define FEC_ENET 1 /* eth.c needs it that way... */
#undef CFG_DISCOVER_PHY
#define CONFIG_MII 1
@@ -105,7 +105,7 @@
#define CONFIG_RMII 1 /* use RMII interface */
#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
+#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
#define CONFIG_FEC1_PHY_NORXERR 1
#define CONFIG_ETHER_ON_FEC2 1
@@ -292,27 +292,27 @@
#if MPC8XX_HZ == 120000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 100000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 50000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 25000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 40000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 75000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#else
#error unsupported CPU freq for XIN = 10MHz
#endif
@@ -322,15 +322,15 @@
#if MPC8XX_HZ == 120000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 100000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 66666666
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#else
#error unsupported CPU freq for XIN = 50MHz
#endif
@@ -514,7 +514,7 @@
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 20404a3..56c76d3 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -64,7 +64,7 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
+ "tftpboot; " \
"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
"bootm"
@@ -93,7 +93,7 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
+#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define FEC_ENET 1 /* eth.c needs it that way... */
#undef CFG_DISCOVER_PHY /* do not discover phys */
#define CONFIG_MII 1
@@ -102,15 +102,15 @@
#if defined(CONFIG_NETTA_ISDN)
#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 1 /* phy address of FEC1 */
+#define CONFIG_FEC1_PHY 1 /* phy address of FEC1 */
#define CONFIG_FEC1_PHY_NORXERR 1
#undef CONFIG_ETHER_ON_FEC2
#else
#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC1 */
+#define CONFIG_FEC1_PHY 8 /* phy address of FEC1 */
#define CONFIG_FEC1_PHY_NORXERR 1
#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 1 /* phy address of FEC2 */
+#define CONFIG_FEC2_PHY 1 /* phy address of FEC2 */
#define CONFIG_FEC2_PHY_NORXERR 1
#endif
@@ -296,27 +296,27 @@
#if MPC8XX_HZ == 120000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 100000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 50000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 25000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 40000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 75000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#else
#error unsupported CPU freq for XIN = 10MHz
#endif
@@ -326,19 +326,19 @@
#if MPC8XX_HZ == 120000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 100000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 80000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 50000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#else
#error unsupported CPU freq for XIN = 50MHz
#endif
@@ -633,7 +633,7 @@
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index cf66e04..b8c4848 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -66,9 +66,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "tftpboot; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_AUTOSCRIPT
@@ -98,7 +98,7 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
+#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define FEC_ENET 1 /* eth.c needs it that way... */
#undef CFG_DISCOVER_PHY
#define CONFIG_MII 1
@@ -106,7 +106,7 @@
#define CONFIG_RMII 1 /* use RMII interface */
#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
+#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
#define CONFIG_FEC1_PHY_NORXERR 1
#define CONFIG_ETHER_ON_FEC2 1
@@ -293,27 +293,27 @@
#if MPC8XX_HZ == 120000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 100000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 50000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 25000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 40000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 75000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#else
#error unsupported CPU freq for XIN = 10MHz
#endif
@@ -323,15 +323,15 @@
#if MPC8XX_HZ == 120000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 100000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 66666666
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#else
#error unsupported CPU freq for XIN = 50MHz
#endif
@@ -515,7 +515,7 @@
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index af5339e..1293fb0 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -63,9 +63,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "tftpboot; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
@@ -411,7 +411,7 @@
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 3929a84..11e5c63 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -295,8 +295,8 @@
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
#define CFG_PCMCIA_IO_ADDR (0xEC000000)
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
-#define PCMCIA_MEM_WIN_NO 8 /* override default 4 in pcmcia.h */
-#define PCMCIA_SOCKETS_NO 2 /* we have two sockets */
+#define PCMCIA_MEM_WIN_NO 8 /* override default 4 in pcmcia.h */
+#define PCMCIA_SOCKETS_NO 2 /* we have two sockets */
#undef NSCU_OE_INV /* PCMCIA_GCRX_CXOE was inverted on early boards */
/*-----------------------------------------------------------------------
diff --git a/include/configs/NX823.h b/include/configs/NX823.h
index da1c173..2a4bd47 100644
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -127,7 +127,7 @@
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0x40000000
-#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
+#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index e85e1b9..5a2d157 100644
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -42,7 +42,7 @@
#define CONFIG_P3G4 1 /* this is a P3G4 board */
#define CFG_GT_6426x GT_64260 /* with a 64260 system controller */
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115200 */
+#define CONFIG_BAUDRATE 115200 /* console baudrate = 115200 */
#undef CONFIG_ECC /* enable ECC support */
/* #define CONFIG_EVB64260_750CX 1 */ /* Support the EVB-64260-750CX Board */
@@ -417,8 +417,8 @@
#define CFG_L2
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
+#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
+ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
#define L2_ENABLE (L2_INIT | L2CR_L2E)
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index 0de7591..4b37eca 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -32,7 +32,7 @@
*/
#define CONFIG_MPC555 1 /* This is an MPC555 CPU */
-#define CONFIG_PATI 1 /* ...On a PATI board */
+#define CONFIG_PATI 1 /* ...On a PATI board */
/* Serial Console Configuration */
#define CONFIG_5xx_CONS_SCI1
#undef CONFIG_5xx_CONS_SCI2
@@ -74,11 +74,11 @@
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
-#define CONFIG_BOOTCOMMAND "" /* autoboot command */
+#define CONFIG_BOOTCOMMAND "" /* autoboot command */
#define CONFIG_BOOTARGS "" /* */
-#define CONFIG_WATCHDOG /* turn on platform specific watchdog */
+#define CONFIG_WATCHDOG /* turn on platform specific watchdog */
/*#define CONFIG_STATUS_LED 1 */ /* Enable status led */
@@ -123,30 +123,30 @@
/*
* Internal Memory Mapped (This is not the IMMR content)
*/
-#define CFG_IMMR 0x01C00000 /* Physical start adress of internal memory map */
+#define CFG_IMMR 0x01C00000 /* Physical start adress of internal memory map */
/*
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
-#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
-#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial global data */
+#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
+#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
+#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial global data */
#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
-#define CFG_INIT_SP_ADDR (CFG_IMMR + 0x03fa000) /* Physical start adress of inital stack */
+#define CFG_INIT_SP_ADDR (CFG_IMMR + 0x03fa000) /* Physical start adress of inital stack */
/*
* Start addresses for the final memory configuration
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
+#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
#define CFG_FLASH_BASE 0xffC00000 /* External flash */
#define PCI_BASE 0x03000000 /* PCI Base (CS2) */
#define PCI_CONFIG_BASE 0x04000000 /* PCI & PLD (CS3) */
#define PLD_CONFIG_BASE 0x04001000 /* PLD (CS3) */
#define CFG_MONITOR_BASE 0xFFF00000
-/* CFG_FLASH_BASE */ /* TEXT_BASE is defined in the board config.mk file. */
- /* This adress is given to the linker with -Ttext to */
- /* locate the text section at this adress. */
+/* CFG_FLASH_BASE */ /* TEXT_BASE is defined in the board config.mk file. */
+ /* This adress is given to the linker with -Ttext to */
+ /* locate the text section at this adress. */
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 192 kB for Monitor */
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
@@ -167,9 +167,9 @@
*/
#define CFG_MAX_FLASH_BANKS 1 /* Max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* Max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
+#define CFG_MAX_FLASH_SECT 128 /* Max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
#define CFG_ENV_IS_IN_EEPROM
@@ -180,8 +180,8 @@
#undef CFG_ENV_IS_IN_FLASH
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SIZE 0x00002000 /* Set whole sector as env */
-#define CFG_ENV_OFFSET ((0 - CFG_FLASH_BASE) - CFG_ENV_SIZE) /* Environment starts at this adress */
+#define CFG_ENV_SIZE 0x00002000 /* Set whole sector as env */
+#define CFG_ENV_OFFSET ((0 - CFG_FLASH_BASE) - CFG_ENV_SIZE) /* Environment starts at this adress */
#endif
@@ -233,7 +233,7 @@
*-----------------------------------------------------------------------
* Data show cycle
*/
-#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle */
+#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle */
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register
@@ -241,7 +241,7 @@
* Set all bits to 40 Mhz
*
*/
-#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
+#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
#define CFG_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0)
@@ -251,12 +251,12 @@
*-----------------------------------------------------------------------
*
*/
-#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
+#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
/*-----------------------------------------------------------------------
* ICTRL - I-Bus Support Control Register
*/
-#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
+#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
/*-----------------------------------------------------------------------
* USIU - Memory Controller Register
diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
index 24b25d9..abb9bfc 100644
--- a/include/configs/PCI5441.h
+++ b/include/configs/PCI5441.h
@@ -54,10 +54,10 @@
/*------------------------------------------------------------------------
* MEMORY ORGANIZATION
- * -Monitor at top.
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
+ * -Monitor at top.
+ * -The heap is placed below the monitor.
+ * -Global data is placed below the heap.
+ * -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */
#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
@@ -87,7 +87,7 @@
#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN)
+#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN)
/*------------------------------------------------------------------------
* CONSOLE
@@ -155,8 +155,8 @@
#define CFG_LONGHELP /* Provide extended help*/
#define CFG_PROMPT "==> " /* Command prompt */
#define CFG_CBSIZE 256 /* Console I/O buf size */
-#define CFG_MAXARGS 16 /* Max command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */
+#define CFG_MAXARGS 16 /* Max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */
#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index b83520d..5890012 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -123,7 +123,7 @@
#define CONFIG_BOOTDELAY 5
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
@@ -252,7 +252,7 @@
#define CFG_TEMP_STACK_OCM 1
#define CFG_OCM_DATA_ADDR 0xF0000000
#define CFG_OCM_DATA_SIZE 0x1000
-#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index ad480a6..6eb6444 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -159,7 +159,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
/*
* I2C configuration
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index cf7314d..36e9aa5 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -47,9 +47,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
/* enable I2C and select the hardware/software driver */
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 38a26dc..9355aaf 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -43,7 +43,7 @@
#define CONFIG_PM856 1 /* PM856 board specific */
#define CONFIG_PCI
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#undef CONFIG_SPD_EEPROM /* do not use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_ECC /* only for ECC DDR module */
@@ -92,7 +92,7 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -141,7 +141,7 @@
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
@@ -167,16 +167,16 @@
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
@@ -236,7 +236,7 @@
#if defined(CONFIG_PCI)
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -244,7 +244,7 @@
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
@@ -256,7 +256,7 @@
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 72acf5a..da7d8b8 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -73,7 +73,7 @@
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#define CONFIG_SERVERIP 10.0.0.201
-#define CONFIG_IPADDR 10.0.0.200
+#define CONFIG_IPADDR 10.0.0.200
#define CONFIG_ROOTPATH /opt/eldk/ppc_82xx
#define CONFIG_NETMASK 255.255.255.0
#undef CONFIG_BOOTARGS
@@ -81,7 +81,7 @@
/* Boot Linux with NFS root filesystem */
#define CONFIG_BOOTCOMMAND \
"setenv verify y;" \
- "setenv bootargs console=ttyS0,19200 mem=31M quiet " \
+ "setenv bootargs console=ttyS0,19200 mem=31M quiet " \
"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
"ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \
"loadp 100000; bootm"
@@ -90,7 +90,7 @@
/* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */
#define CONFIG_BOOTCOMMAND \
"setenv verify n;" \
- "setenv bootargs console=ttyS0,19200 mem=31M quiet " \
+ "setenv bootargs console=ttyS0,19200 mem=31M quiet " \
"root=/dev/ram rw " \
"ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \
"loadp 200000; bootm"
@@ -128,7 +128,7 @@
/*
* Networking stuff
*/
-#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_PCNET /* there are 2 AMD PCnet 79C973 */
#define CONFIG_PCNET_79C973
@@ -153,9 +153,9 @@
/*#define CFG_GBL_DATA_SIZE 256*/
#define CFG_GBL_DATA_SIZE 128
-#define CFG_INIT_RAM_ADDR 0x40000000
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_NO_FLASH 1 /* There is no FLASH memory */
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
index 3dd84e8..cef9f42 100644
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -492,12 +492,12 @@
/* For boards with 16M of SDRAM */
#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */
-#define CFG_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
+#define CFG_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
/* For boards with 32M of SDRAM */
#define SDRAM_32M_MAX_SIZE 0x02000000 /* max 32MB SDRAM */
-#define CFG_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
+#define CFG_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
index 7dd6eca..ba5827a 100644
--- a/include/configs/QS850.h
+++ b/include/configs/QS850.h
@@ -492,12 +492,12 @@
/* For boards with 16M of SDRAM */
#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */
-#define CFG_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
+#define CFG_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
/* For boards with 32M of SDRAM */
#define SDRAM_32M_MAX_SIZE 0x02000000 /* max 32MB SDRAM */
-#define CFG_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
+#define CFG_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index f4aecfc..a653cca 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -62,9 +62,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#undef CONFIG_SCC1_ENET
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index e3c7561..9222d21 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -65,9 +65,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 793b1db..706e2aa 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -78,9 +78,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "tftpboot; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -467,7 +467,7 @@
#define BCSR3 0xFA400003
#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
-#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
+#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */
#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */
#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index 3c5e6b8..671094b 100644
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -51,9 +51,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -156,7 +156,7 @@
#define CFG_DIRECT_FLASH_TFTP
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */
+#define CFG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CONFIG_ENV_OVERWRITE
@@ -361,7 +361,7 @@
#define BCSR3 0xFA400003
#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
-#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
+#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */
#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */
#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index 32e2285..6a71801 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -119,7 +119,7 @@
/* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_SOFT_I2C /* I2C bit-banged */
# define CFG_I2C_SPEED 50000 /* 50 kHz is supposed to work */
# define CFG_I2C_SLAVE 0xFE
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index 428c0c2..01ebc8f 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -250,13 +250,13 @@
/* Hard reset configuration word */
#define CFG_HRCW_MASTER 0x0A06875A /* Not used - provided by FPGA */
/* No slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 946b3c2..ff64378 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -48,7 +48,7 @@
#define CONFIG_CPM2 1 /* has CPM2 */
-#define CONFIG_SBC8540 1 /* configuration for SBC8560 board */
+#define CONFIG_SBC8540 1 /* configuration for SBC8560 board */
#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index bc5389f..febfc39 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -67,9 +67,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
/* enable I2C and select the hardware/software driver */
@@ -165,7 +165,7 @@
* - Enable Full Duplex in FSMR
*/
# define CFG_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
# define CFG_CPMFCR_RAMTYPE 0
# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
diff --git a/include/configs/SL8245.h b/include/configs/SL8245.h
index 4d9d41b..31853c8 100644
--- a/include/configs/SL8245.h
+++ b/include/configs/SL8245.h
@@ -90,10 +90,10 @@
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank on RCS#0 */
-#define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM
+#define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM
#define CFG_FLASH_BANKS { CFG_FLASH_BASE0_PRELIM }
#define CFG_RESET_ADDRESS 0xFFF00100
diff --git a/include/configs/SM850.h b/include/configs/SM850.h
index 41a54f0..465db47 100644
--- a/include/configs/SM850.h
+++ b/include/configs/SM850.h
@@ -54,9 +54,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 8f2a5ec..3aee45c 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -204,7 +204,7 @@
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
@@ -250,7 +250,7 @@
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-#define CFG_LOAD_ADDR 0x00100000
+#define CFG_LOAD_ADDR 0x00100000
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 1affcfd..71fa36b 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -176,7 +176,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* I2C configuration
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 8237ba1..151c407 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -201,10 +201,10 @@
* defines we need to get FEC running
*/
#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
-#define CONFIG_FEC_ENET 1 /* Ethernet only via FEC */
-#define FEC_ENET 1 /* eth.c needs it that way... */
+#define CONFIG_FEC_ENET 1 /* Ethernet only via FEC */
+#define FEC_ENET 1 /* eth.c needs it that way... */
#define CFG_DISCOVER_PHY 1
-#define CONFIG_MII 1
+#define CONFIG_MII 1
#define CONFIG_MII_INIT 1
#define CONFIG_PHY_ADDR 31
@@ -287,7 +287,7 @@
*-----------------------------------------------------------------------
* set up SYPCR:
* 16 SWTC 0xffff Software watchdog timer count
- * 8 BMT 0xff Bus monitor timing
+ * 8 BMT 0xff Bus monitor timing
* 1 BME 1 Bus monitor enable
* 3 0 000
* 1 SWF 1 Software watchdog freeze
@@ -297,7 +297,7 @@
*/
#if defined (CONFIG_WATCHDOG)
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
#endif
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 02a16ac..a86939e 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -176,7 +176,7 @@ extern int tqm834x_num_flash_banks;
#define CFG_INIT_RAM_ADDR 0x20000000 /* Initial RAM address */
#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
-#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
@@ -231,7 +231,7 @@ extern int tqm834x_num_flash_banks;
/*
* TSEC
*/
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_MII
#define CFG_TSEC1_OFFSET 0x24000
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 2507d77..31f10dd 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -178,7 +178,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
/*
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index df6894f..ad8db61 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -44,7 +44,7 @@
#define USE_920T_MMU 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
@@ -84,8 +84,8 @@
* address 0x50 with 16bit addressing
***********************************************************/
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#define CFG_I2C_SPEED 100000 /* I2C speed */
-#define CFG_I2C_SLAVE 0x7F /* I2C slave addr */
+#define CFG_I2C_SPEED 100000 /* I2C speed */
+#define CFG_I2C_SLAVE 0x7F /* I2C slave addr */
#define CFG_I2C_EEPROM_ADDR 0x50
#define CFG_I2C_EEPROM_ADDR_LEN 2
@@ -111,7 +111,7 @@
*/
#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
#define CS8900_BASE 0x20000300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
#define CONFIG_DRIVER_S3C24X0_I2C 1 /* we use the buildin I2C controller */
@@ -145,7 +145,7 @@
#define CONFIG_BOOTDELAY 5
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.0.0.110
@@ -262,7 +262,7 @@
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index 1405784..db05d82 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -369,7 +369,7 @@
/*
* MEMORY MAP
* ----------
- * CS0 - FLASH 8MB/8Bit base=0xff800000 (boot: 0xfe000000, 8x mirrored)
+ * CS0 - FLASH 8MB/8Bit base=0xff800000 (boot: 0xfe000000, 8x mirrored)
* CS1 - SDRAM 32MB/64Bit base=0x00000000
* CS2 - DSP/SL1 1MB/16Bit base=0xf0100000
* CS3 - DSP/SL2 1MB/16Bit base=0xf0200000
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 7017fff..bb6b6b9 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -154,10 +154,10 @@
#define CFG_PCI_SUBSYS_DEVICEID 0x0156 /* PCI Device ID: 405GP */
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
/*-----------------------------------------------------------------------
* Set up values for external bus controller
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index bfb3156..3050caf 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -161,10 +161,10 @@
#define CFG_PCI_SUBSYS_DEVICEID 0x0156 /* PCI Device ID: 405GP */
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
/*-----------------------------------------------------------------------
* Set up values for external bus controller
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 7c1a5b9..b04be76 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -200,13 +200,13 @@
HRCW_MODCK_H0111 \
) /* 0x16848207 */
/* No slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index 81e7c1e..f55d91f 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -161,7 +161,7 @@
#define CFG_FLASH_USE_BUFFER_WRITE
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
-#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
#undef CFG_FLASH_CHECKSUM
diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h
index 703d312..427b548 100644
--- a/include/configs/adsvix.h
+++ b/include/configs/adsvix.h
@@ -359,7 +359,7 @@
/* Flash environment locations */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */
-#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */
+#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
#endif /* __CONFIG_H */
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index 294cd26..8973296 100755..100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -174,7 +174,7 @@
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
+#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
index 73a8885..98a83db 100644
--- a/include/configs/armadillo.h
+++ b/include/configs/armadillo.h
@@ -41,9 +41,9 @@
* (easy to change)
*/
#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARMADILLO 1 /* on an Armadillo Board */
+#define CONFIG_ARMADILLO 1 /* on an Armadillo Board */
#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
#undef CONFIG_USE_IRQ /* don't need them anymore */
@@ -88,7 +88,7 @@
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
+#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
#define CONFIG_BOOTCOMMAND "bootm 40000 180000"
diff --git a/include/configs/atc.h b/include/configs/atc.h
index 4ef50c2..285b4e4 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -111,7 +111,7 @@
#define CONFIG_BOOTCOMMAND \
"bootp;" \
"setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath} " \
+ "nfsroot=${serverip}:${rootpath} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"\
"bootm"
@@ -182,9 +182,9 @@
#define CONFIG_RTC_DS12887
-#define RTC_BASE_ADDR 0xF5000000
-#define RTC_PORT_ADDR RTC_BASE_ADDR + 0x800
-#define RTC_PORT_DATA RTC_BASE_ADDR + 0x808
+#define RTC_BASE_ADDR 0xF5000000
+#define RTC_PORT_ADDR RTC_BASE_ADDR + 0x800
+#define RTC_PORT_DATA RTC_BASE_ADDR + 0x808
#define CONFIG_MISC_INIT_R
diff --git a/include/configs/barco.h b/include/configs/barco.h
index 0bb446f..4f57067 100644
--- a/include/configs/barco.h
+++ b/include/configs/barco.h
@@ -96,8 +96,8 @@
#define CONFIG_HUSH_PARSER 1 /* use "hush" command parser */
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_BOOTCOMMAND "boot_default"
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_BOOTCOMMAND "boot_default"
/*
* Miscellaneous configurable options
@@ -135,9 +135,9 @@
#define CONFIG_LOGBUFFER
#ifdef CONFIG_LOGBUFFER
-#define CFG_STDOUT_ADDR 0x1FFC000
+#define CFG_STDOUT_ADDR 0x1FFC000
#else
-#define CFG_STDOUT_ADDR 0x2B9000
+#define CFG_STDOUT_ADDR 0x2B9000
#endif
#define CFG_RESET_ADDRESS 0xFFF00100
@@ -158,9 +158,9 @@
#define CFG_GBL_DATA_SIZE 128
-#define CFG_INIT_RAM_ADDR 0x40000000
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#endif
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 66a0af6..d70aa10 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -25,7 +25,7 @@
#define CONFIG_SMC91111_BASE 0x20300300
/* FLASH/ETHERNET uses the same address range */
-#define SHARED_RESOURCES 1
+#define SHARED_RESOURCES 1
/* Is I2C bit-banged? */
#define CONFIG_SOFT_I2C 1
@@ -112,7 +112,7 @@
#endif
#define CFG_ENV_SIZE 0x2000
-#define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */
#define ENV_IS_EMBEDDED
#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */
@@ -123,7 +123,7 @@
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_NUM_BANKS 1
/* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR 11
+#define CFG_JFFS2_FIRST_SECTOR 11
/*
* following timeouts shall be used once the
@@ -148,7 +148,7 @@
#define CFG_MEMTEST_END (CFG_MAX_RAM_SIZE - 0x80000 - 1)
#define CONFIG_LOADADDR 0x01000000
-#define CFG_LOAD_ADDR CONFIG_LOADADDR
+#define CFG_LOAD_ADDR CONFIG_LOADADDR
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_GBL_DATA_SIZE 0x4000 /* Reserve 16k for Global Data */
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 39c7359..a881d53 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -103,11 +103,11 @@
#define CFG_LONGHELP 1
#define CONFIG_BOOTDELAY 5
#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */
-#define CONFIG_BOOTCOMMAND "run ramboot"
+#define CONFIG_BOOTCOMMAND "run ramboot"
#if defined(CONFIG_POST_TEST)
/* POST support */
-#define CONFIG_POST ( CFG_POST_MEMORY | \
+#define CONFIG_POST ( CFG_POST_MEMORY | \
CFG_POST_UART | \
CFG_POST_FLASH | \
CFG_POST_ETHER | \
@@ -208,7 +208,7 @@
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024*1024)
+#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024*1024)
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -281,10 +281,10 @@
#define NAND_MAX_CHIPS 1
#define BFIN_NAND_READY PF3
-#define NAND_WAIT_READY(nand) \
- do { \
- int timeout = 0; \
- while(!(*pPORTFIO & PF3)) \
+#define NAND_WAIT_READY(nand) \
+ do { \
+ int timeout = 0; \
+ while(!(*pPORTFIO & PF3)) \
if (timeout++ > 100000) \
break; \
} while (0)
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 641548d..e99e979 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -148,28 +148,27 @@
#if (CONFIG_DRIVER_SMC91111)
#define CONFIG_EXTRA_ENV_SETTINGS \
- "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
+ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \
- "$(rootpath) console=ttyBF0,57600\0" \
+ "$(rootpath) console=ttyBF0,57600\0" \
"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
"$(gatewayip):$(netmask):$(hostname):eth0:off\0" \
- "ramboot=tftpboot $(loadaddr) linux; " \
+ "ramboot=tftpboot $(loadaddr) linux; " \
"run ramargs; run addip; bootelf\0" \
- "nfsboot=tftpboot $(loadaddr) linux; " \
+ "nfsboot=tftpboot $(loadaddr) linux; " \
"run nfsargs; run addip; bootelf\0" \
- "update=tftpboot $(loadaddr) u-boot.bin; " \
+ "update=tftpboot $(loadaddr) u-boot.bin; " \
"protect off 0x20000000 0x2003FFFF; " \
"erase 0x20000000 0x2003FFFF; " \
- "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
+ "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
""
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
- "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
+ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
"flashboot=bootm 0x20100000\0" \
""
#endif
-
/*
* BOOTP options
*/
@@ -178,7 +177,6 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
@@ -193,7 +191,6 @@
#define CONFIG_CMD_DHCP
#endif
-
/*
* Console settings
*/
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index cbd74a0..75dd4e7 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -302,7 +302,7 @@
#define CFG_FLASH_WORD_SIZE unsigned char
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h
index a5621b8..6f0d4b0 100644
--- a/include/configs/c2mon.h
+++ b/include/configs/c2mon.h
@@ -54,9 +54,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 440972c..0f7bb61 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -31,7 +31,7 @@
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
-#define CONFIG_CANMB 1 /* ... on canmb board - we need this for FEC.C */
+#define CONFIG_CANMB 1 /* ... on canmb board - we need this for FEC.C */
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
@@ -115,7 +115,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
/*
* Flash configuration, expect one 16 Megabyte Bank at most
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
index e06735d..c801f03 100644
--- a/include/configs/cerf250.h
+++ b/include/configs/cerf250.h
@@ -39,7 +39,7 @@
#define BOARD_LATE_INIT 1
#define CONFIG_BAUDRATE 38400
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/*
* Size of malloc() pool
@@ -104,7 +104,7 @@
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#endif
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
/* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -137,21 +137,21 @@
/*
* Physical Memory Map
*/
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
+#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
+#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
+#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
+#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
+#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
+#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
+#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
+#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
+#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
#define CFG_DRAM_BASE 0xa0000000
#define CFG_DRAM_SIZE 0x04000000
@@ -210,7 +210,7 @@
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index a869364..ac2b7a1 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -24,7 +24,7 @@
* File: cmi_mpc5xx.h
*
* Discription: Config header file for cmi
- * board using an MPC5xx CPU
+ * board using an MPC5xx CPU
*
*/
@@ -36,7 +36,7 @@
*/
#define CONFIG_MPC555 1 /* This is an MPC555 CPU */
-#define CONFIG_CMI 1 /* Using the customized cmi board */
+#define CONFIG_CMI 1 /* Using the customized cmi board */
/* Serial Console Configuration */
#define CONFIG_5xx_CONS_SCI1
@@ -79,11 +79,11 @@
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
-#define CONFIG_BOOTCOMMAND "go 02034004" /* autoboot command */
+#define CONFIG_BOOTCOMMAND "go 02034004" /* autoboot command */
#define CONFIG_BOOTARGS "" /* Assuming OS Image in 4 flash sector at offset 4004 */
-#define CONFIG_WATCHDOG /* turn on platform specific watchdog */
+#define CONFIG_WATCHDOG /* turn on platform specific watchdog */
#define CONFIG_STATUS_LED 1 /* Enable status led */
@@ -121,30 +121,30 @@
/*
* Internal Memory Mapped (This is not the IMMR content)
*/
-#define CFG_IMMR 0x01000000 /* Physical start adress of internal memory map */
+#define CFG_IMMR 0x01000000 /* Physical start adress of internal memory map */
/*
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
-#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
-#define CFG_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */
+#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
+#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
+#define CFG_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */
#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
-#define CFG_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */
+#define CFG_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */
/*
* Start addresses for the final memory configuration
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
+#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
#define CFG_FLASH_BASE 0x02000000 /* External flash */
#define PLD_BASE 0x03000000 /* PLD */
#define ANYBUS_BASE 0x03010000 /* Anybus Module */
#define CFG_RESET_ADRESS 0x01000000 /* Adress which causes reset */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* TEXT_BASE is defined in the board config.mk file. */
- /* This adress is given to the linker with -Ttext to */
- /* locate the text section at this adress. */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* TEXT_BASE is defined in the board config.mk file. */
+ /* This adress is given to the linker with -Ttext to */
+ /* locate the text section at this adress. */
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#define CFG_MALLOC_LEN (64 << 10) /* Reserve 128 kB for malloc() */
@@ -163,16 +163,16 @@
*/
#define CFG_MAX_FLASH_BANKS 1 /* Max number of memory banks */
-#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
+#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
#define CFG_FLASH_PROTECTION 1 /* Physically section protection on */
#define CFG_ENV_IS_IN_FLASH 1
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */
-#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */
+#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */
+#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
#endif
@@ -219,7 +219,7 @@
*-----------------------------------------------------------------------
* Data show cycle
*/
-#define CFG_SIUMCR (SIUMCR_DBGC00) /* Disable data show cycle */
+#define CFG_SIUMCR (SIUMCR_DBGC00) /* Disable data show cycle */
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register
@@ -227,7 +227,7 @@
* Set all bits to 40 Mhz
*
*/
-#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
+#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
#define CFG_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0)
@@ -236,12 +236,12 @@
*-----------------------------------------------------------------------
*
*/
-#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
+#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
/*-----------------------------------------------------------------------
* ICTRL - I-Bus Support Control Register
*/
-#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
+#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
/*-----------------------------------------------------------------------
* USIU - Memory Controller Register
@@ -256,7 +256,7 @@
#define CFG_OR2_PRELIM (OR_ADDR_MK_FF)
#define CFG_BR3_PRELIM (PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
#define CFG_OR3_PRELIM (OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
- OR_ACS_10 | OR_ETHR | OR_CSNT)
+ OR_ACS_10 | OR_ETHR | OR_CSNT)
#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* We don't realign the flash */
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index c7e3899..649b053 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -101,7 +101,7 @@
* bootloader residing in flash ('chainloading'); if you want to use
* chainloading or want to compile a u-boot binary that can be loaded into
* RAM via BDM set
- * "#if 0" to "#if 1"
+ * "#if 0" to "#if 1"
* You will need a first stage bootloader then, e. g. colilo or a working BDM
* cable (Background Debug Mode)
*
@@ -165,7 +165,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index 0be0f21..a807d00 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -37,7 +37,7 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
+#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_CSB226 1 /* on a CSB226 board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index a24478d..15bf177 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -33,7 +33,7 @@
* (easy to change)
*/
-#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
+#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
#define CONFIG_CSB272 1 /* on a Cogent CSB272 board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */
@@ -182,7 +182,7 @@
*/
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
-#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
+#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
/* 32usec min. for LXT971A */
#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 064650c..b06c0a2 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -33,7 +33,7 @@
* (easy to change)
*/
-#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
+#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
#define CONFIG_CSB472 1 /* on a Cogent CSB472 board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */
@@ -181,7 +181,7 @@
*/
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
-#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
+#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
/* 32usec min. for LXT971A */
#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 8ecd059..632c4c2 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -145,16 +145,16 @@
#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
-#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
#endif
/*==============================*/
/* U-Boot general configuration */
/*==============================*/
-#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_MISC_INIT_R
#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 96c9a30..10166a1 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -102,7 +102,7 @@
/*==============================*/
/* U-Boot general configuration */
/*==============================*/
-#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_MISC_INIT_R
#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index de8c4fa..ba68605 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -140,16 +140,16 @@
#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */
#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2)
-#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
#endif
/*==============================*/
/* U-Boot general configuration */
/*==============================*/
-#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_MISC_INIT_R
#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index d32e046..e7873e9 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -83,7 +83,7 @@
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
+#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
#define CONFIG_ETHADDR 02:80:ad:20:31:b8
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_IPADDR 172.22.2.23
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index f5cf477..5433082 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -34,7 +34,7 @@
#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
#define CONFIG_EP7312 1 /* on an EP7312 Board */
#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
#undef CONFIG_USE_IRQ /* don't need them anymore */
@@ -81,8 +81,8 @@
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
-#define CONFIG_ETHADDR 08:00:3e:21:c7:f7
+#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
+#define CONFIG_ETHADDR 08:00:3e:21:c7:f7
/*#define CONFIG_NETMASK 255.255.0.0 */
/*#define CONFIG_IPADDR 172.22.2.128 */
/*#define CONFIG_SERVERIP 172.22.2.126 */
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index cebe849..8a220b6 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -234,13 +234,13 @@
/* Hard reset configuration word */
#define CFG_HRCW_MASTER 0x0C40025A /* Not used - provided by FPGA */
/* No slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 490db5f..0ce6b80 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -28,17 +28,17 @@
* board/config.h - configuration options, board specific
*
* "EP8260 H, V.1.1"
- * - 64M 60x Bus SDRAM
- * - 32M Local Bus SDRAM
- * - 16M Flash (4 x AM29DL323DB90WDI)
- * - 128k NVRAM with RTC
+ * - 64M 60x Bus SDRAM
+ * - 32M Local Bus SDRAM
+ * - 16M Flash (4 x AM29DL323DB90WDI)
+ * - 128k NVRAM with RTC
*
* "EP8260 H2, V.1.3" (CFG_EP8260_H2)
- * - 300MHz/133MHz/66MHz
- * - 64M 60x Bus SDRAM
- * - 32M Local Bus SDRAM
- * - 32M Flash
- * - 128k NVRAM with RTC
+ * - 300MHz/133MHz/66MHz
+ * - 64M 60x Bus SDRAM
+ * - 32M Local Bus SDRAM
+ * - 32M Flash
+ * - 128k NVRAM with RTC
*/
#ifndef __CONFIG_H
@@ -408,7 +408,7 @@
CFG_SBC_HRCW_IMMR |\
HRCW_APPC10 |\
HRCW_CS10PC01 |\
- CFG_SBC_MODCK_H |\
+ CFG_SBC_MODCK_H |\
CFG_SBC_HRCW_BOOT_FLAGS)
#else
#define CFG_HRCW_MASTER 0x10400245
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index 8e5d6e5..ac5847c 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -229,7 +229,7 @@
#endif /* CFG_ENV_IS_IN_EEPROM */
/* RTC Configuration */
-#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */
+#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */
#define CFG_I2C_RTC_ADDR 0x68
#define CONFIG_M41T11_BASE_YEAR 1900
@@ -353,13 +353,13 @@
/* Hard reset configuration word */
#define CFG_HRCW_MASTER 0 /*0x1C800641*/ /* Not used - provided by CPLD */
/* No slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index 66500c2..1571477 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -98,7 +98,7 @@
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTCOMMAND "tftp 100000 uImage"
-/* #define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
+/* #define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index 1276f4d..ffe7671 100644
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -58,7 +58,7 @@
#define CONFIG_LEON_RAM_SELECT CONFIG_LEON_RAM_SRAM
/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 20000000 /* 20MHz */
+#define CONFIG_SYS_CLK_FREQ 20000000 /* 20MHz */
/* Number of SPARC register windows */
#define CFG_SPARC_NWINDOWS 8
diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
index 710a082..7b1d582 100644
--- a/include/configs/gr_ep2s60.h
+++ b/include/configs/gr_ep2s60.h
@@ -39,10 +39,10 @@
#define CONFIG_LEON3 /* This is an LEON3 CPU */
#define CONFIG_LEON 1 /* This is an LEON CPU */
/* Altera NIOS Development board, Stratix II board */
-#define CONFIG_GR_EP2S60 1
+#define CONFIG_GR_EP2S60 1
/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 96000000 /* 96MHz */
+#define CONFIG_SYS_CLK_FREQ 96000000 /* 96MHz */
/* Number of SPARC register windows */
#define CFG_SPARC_NWINDOWS 8
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index 1fdef3d..6fe2b7c 100644
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -39,7 +39,7 @@
#define CONFIG_GRXC3S1500 1 /* ... on GR-XC3S-1500 board */
/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
+#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
/* Number of SPARC register windows */
#define CFG_SPARC_NWINDOWS 8
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index 60ad396..3fb8eb3 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -46,7 +46,7 @@
#define CONFIG_TSIM 1 /* ... running on TSIM */
/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
+#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
/* Number of SPARC register windows */
#define CFG_SPARC_NWINDOWS 8
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index 2ad5b95..406ce3d 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -45,7 +45,7 @@
#define CONFIG_TSIM 1 /* ... running on TSIM */
/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
+#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
/* Number of SPARC register windows */
#define CFG_SPARC_NWINDOWS 8
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index 4ecaf90..13b0358 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -127,14 +127,14 @@
#ifdef CFG_ENV_IS_IN_EEPROM
/* Put the environment after the SDRAM configuration */
-#define PROM_SIZE 2048
+#define PROM_SIZE 2048
#define CFG_ENV_OFFSET 512
#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
#endif
#ifdef CFG_ENV_IS_IN_FLASH
/* Put the environment in Flash */
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 8*1024 /* 8 KB Environment Sector */
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index f5f1197..2080868 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -113,7 +113,7 @@
#ifdef CFG_ENV_IS_IN_EEPROM
/* Put the environment after the SDRAM and bootstrap configuration */
-#define PROM_SIZE 2048
+#define PROM_SIZE 2048
#define CFG_BOOSTRAP_OPTION_OFFSET 512
#define CFG_ENV_OFFSET (CFG_BOOSTRAP_OPTION_OFFSET + 0x10)
#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
@@ -134,7 +134,7 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */
+#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */
#define CFG_DDR_CACHED_ADDR 0x50000000 /* setup 2nd TLB cached here */
#undef CONFIG_DDR_DATA_EYE /* Do not use DDR2 optimization */
#define CONFIG_DDR_ECC 1 /* enable ECC */
@@ -176,13 +176,13 @@
/* Setup some board specific values for the default environment variables */
#define CONFIG_HOSTNAME hcu5
#define CONFIG_IPADDR 172.25.1.99
-#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
+#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
#define CONFIG_OVERWRITE_ETHADDR_ONCE
#define CONFIG_SERVERIP 172.25.1.3
#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=0x01000000\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -192,11 +192,11 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
- "bootfile=hcu5/uImage\0" \
- "rootpath=/home/hcu/eldk/ppc_4xxFP\0" \
- "load=tftp 100000 hcu5/u-boot.bin\0" \
+ "bootfile=hcu5/uImage\0" \
+ "rootpath=/home/hcu/eldk/ppc_4xxFP\0" \
+ "load=tftp 100000 hcu5/u-boot.bin\0" \
"update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;" \
"cp.b 100000 FFFB0000 50000\0" \
"upd=run load update\0" \
@@ -204,9 +204,9 @@
"vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0" \
"vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}" \
" h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0" \
- "usbargs=setenv bootargs root=/dev/sda1 ro\0" \
+ "usbargs=setenv bootargs root=/dev/sda1 ro\0" \
"linux=usb start; ext2load usb 0 ${loadaddr} /boot/uImage;" \
- "run usbargs addip addtty; bootm\0" \
+ "run usbargs addip addtty; bootm\0" \
"net_nfs_fdt=tftp 200000 ${bootfile};" \
"tftp ${fdt_addr} ${fdt_file};" \
"run nfsargs addip addtty;" \
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
index e3a2ed2..48b23bd 100644
--- a/include/configs/hermes.h
+++ b/include/configs/hermes.h
@@ -54,9 +54,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -105,7 +105,7 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CFG_ALLOC_DPRAM 1 /* use allocation routines */
+#define CFG_ALLOC_DPRAM 1 /* use allocation routines */
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
@@ -227,7 +227,7 @@
/* +0x0282 => 0x03800000 */
#define CFG_SCCR (SCCR_COM00 | SCCR_TBS | \
SCCR_RTDIV | SCCR_RTSEL | \
- /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
+ /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
SCCR_EBDF00 | SCCR_DFSYNC00 | \
SCCR_DFBRG00 | SCCR_DFNL000 | \
SCCR_DFNH000)
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index 2ed51f7..7c3ebad 100644
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -164,7 +164,7 @@
# define CFG_FEC0_PINMUX 0
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
+# define MCFFEC_TOUT_LOOP 50000
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
# ifndef CFG_DISCOVER_PHY
# define FECDUPLEX FULL
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
index 0e52ffe..e9704fc 100644
--- a/include/configs/impa7.h
+++ b/include/configs/impa7.h
@@ -34,7 +34,7 @@
#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
#define CONFIG_IMPA7 1 /* on an impA7 Board */
#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#define CONFIG_ARM7_REVD 1 /* enable ARM720 REV.D Workarounds */
+#define CONFIG_ARM7_REVD 1 /* enable ARM720 REV.D Workarounds */
#undef CONFIG_USE_IRQ /* don't need them anymore */
@@ -80,7 +80,7 @@
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
+#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5a */
/*#define CONFIG_NETMASK 255.255.0.0 */
/*#define CONFIG_IPADDR 172.22.2.128 */
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 5310e0d..2b65052 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -34,7 +34,7 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
+#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_INNOKOM 1 /* on an Auerswald Innokom board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@@ -136,11 +136,11 @@
/*
* I2C bus
*/
-#define CONFIG_HARD_I2C 1
-#define CFG_I2C_SPEED 50000
-#define CFG_I2C_SLAVE 0xfe
+#define CONFIG_HARD_I2C 1
+#define CFG_I2C_SPEED 50000
+#define CFG_I2C_SLAVE 0xfe
-#define CFG_ENV_IS_IN_EEPROM 1
+#define CFG_ENV_IS_IN_EEPROM 1
#define CFG_ENV_OFFSET 0x00 /* environment starts here */
#define CFG_ENV_SIZE 1024 /* 1 KiB */
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index e1d1483..347fa02 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -140,7 +140,7 @@ SIB at Block62 End Block62 address 0x24f80000
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
/*-----------------------------------------------------------------------
* FLASH and environment organization
@@ -156,9 +156,9 @@ SIB at Block62 End Block62 address 0x24f80000
*/
#define CFG_FLASH_BASE 0x24000000
-#define CFG_MAX_FLASH_SECT 64
+#define CFG_MAX_FLASH_SECT 64
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
+#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index bc5f9e1..b7c43fe 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -165,7 +165,7 @@
*/
#define CFG_SDR_CONFIG 0xd
#define CFG_SDR_MODE_CONFIG 0x1
-#define CFG_SDRAM_REFRESH_CNT 0x81a
+#define CFG_SDRAM_REFRESH_CNT 0x81a
/*
* GPIO settings
@@ -178,7 +178,7 @@
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
#define CFG_FLASH_CFI /* The flash is CFI compatible */
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
@@ -193,7 +193,7 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
index a3be0b5..05dc841 100644
--- a/include/configs/ixdpg425.h
+++ b/include/configs/ixdpg425.h
@@ -201,13 +201,13 @@
*/
#define CFG_SDR_CONFIG 0x18
#define CFG_SDR_MODE_CONFIG 0x1
-#define CFG_SDRAM_REFRESH_CNT 0x81a
+#define CFG_SDRAM_REFRESH_CNT 0x81a
/*
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
#define CFG_FLASH_CFI /* The flash is CFI compatible */
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
@@ -225,7 +225,7 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 0ac3e7e..980e9fe 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -142,7 +142,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
#if 0
/* pass open firmware flat tree */
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index c7c42a4..a596768 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -108,7 +108,7 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 48d73ac..7655666 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -225,7 +225,7 @@
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx */
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx */
/* buffers & descriptors */
#define CONFIG_NET_MULTI 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
@@ -308,7 +308,7 @@
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
- /* Print Buffer Size */
+ /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -339,7 +339,7 @@
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */
/* CFG_PCI_MEMBASE */
/* Board-specific PCI */
#define CFG_PCI_TARGET_INIT
diff --git a/include/configs/lart.h b/include/configs/lart.h
index 8f18c9f..4570398 100644
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -76,7 +76,7 @@
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600"
+#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_IPADDR 172.22.2.131
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index 518186b..d3908b9 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -114,9 +114,9 @@
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */
-#define CONFIG_BOOTCOMMAND "run bootcmd1"
+#define CONFIG_BOOTCOMMAND "run bootcmd1"
#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug"
-#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm"
+#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm"
#define CFG_CONSOLE_IS_IN_ENV
@@ -214,28 +214,28 @@
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xFFC00000
+#define CFG_FLASH_BASE 0xFFC00000
#define CFG_FLASH_SIZE 0x00400000
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_RESET_ADDRESS 0xFFF00100
-#define CFG_EUMB_ADDR 0x80000000
+#define CFG_RESET_ADDRESS 0xFFF00100
+#define CFG_EUMB_ADDR 0x80000000
#define CFG_PCI_MEM_ADDR 0xB0000000
#define CFG_MISC_REGION_ADDR 0xFE000000
-#define CFG_MONITOR_LEN 0x00040000 /* 256 kB */
-#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
+#define CFG_MONITOR_LEN 0x00040000 /* 256 kB */
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
/* Maximum amount of RAM */
#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define CFG_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */
+#define CFG_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */
#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CFG_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */
+#define CFG_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */
#else
#error Unknown LinkStation type
#endif
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
index 2b2d377..047b4a4 100644
--- a/include/configs/logodl.h
+++ b/include/configs/logodl.h
@@ -34,7 +34,7 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
+#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_GEALOG 1 /* on a Logotronic GEALOG SG board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
index 67243d4..af066f3 100644
--- a/include/configs/makalu.h
+++ b/include/configs/makalu.h
@@ -101,7 +101,7 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h
index c5b6e8f..4e9645e 100644
--- a/include/configs/mcu25.h
+++ b/include/configs/mcu25.h
@@ -45,7 +45,7 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Monitor */
+#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Monitor */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
@@ -54,13 +54,13 @@
#define CFG_MONITOR_BASE TEXT_BASE
/* ... with on-chip memory here (4KBytes) */
-#define CFG_OCM_DATA_ADDR 0xF4000000
-#define CFG_OCM_DATA_SIZE 0x00001000
+#define CFG_OCM_DATA_ADDR 0xF4000000
+#define CFG_OCM_DATA_SIZE 0x00001000
/* Do not set up locked dcache as init ram. */
#undef CFG_INIT_DCACHE_CS
/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
-#define CFG_TEMP_STACK_OCM 1
+#define CFG_TEMP_STACK_OCM 1
#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* OCM */
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE
@@ -127,7 +127,7 @@
#ifdef CFG_ENV_IS_IN_EEPROM
/* Put the environment after the SDRAM configuration */
-#define PROM_SIZE 2048
+#define PROM_SIZE 2048
#define CFG_ENV_OFFSET 512
#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
#endif
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 49919fb..5218d9c 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -154,7 +154,7 @@
/*
* IPB Bus clocking configuration.
*/
-#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
#endif
/*
* I2C configuration
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 2924acc..59ff96b 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -188,13 +188,13 @@
#define CFG_HRCW_MASTER 0x0604b211
/* No slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index 4461bdf..5159897 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -90,7 +90,8 @@
/*#define CONFIG_BOOTDELAY 10*/
/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */
#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000"
-#define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
+#define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K " \
+ "root=/dev/ram keepinitrd"
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index 9c94c4e..5e79a27 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -96,7 +96,7 @@
#define CFG_ENV_SECT_SIZE (64 * 1024)
#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_ERASE_TOUT 120000
#define CFG_FLASH_WRITE_TOUT 500
/* Board Clock */
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index 8538037..8d92a13 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -39,7 +39,7 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
+#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.0.22
#define CONFIG_SERVERIP 192.168.0.1
@@ -86,7 +86,7 @@
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */
#define CFG_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
- in Flash (NOT run time address in SDRAM) ?!? */
+ in Flash (NOT run time address in SDRAM) ?!? */
#define CFG_MONITOR_LEN (128 * 1024) /* */
#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */
@@ -101,7 +101,7 @@
#define CFG_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */
#define CFG_MAX_FLASH_SECT 150 /* Max number of sectors on each
- Flash chip */
+ Flash chip */
/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
#define CFG_MAX_FLASH_BANKS 2
@@ -123,7 +123,7 @@
#define CFG_ENV_SECT_SIZE (8 * 1024)
#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE))
-#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) /* Offset of env Flash sector relative to CFG_FLASH_BASE */
+#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) /* Offset of env Flash sector relative to CFG_FLASH_BASE */
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index a25364d..3000c77 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -48,7 +48,7 @@
#define BOARD_LATE_INIT 1
#define CONFIG_BOOTDELAY -1
-#define CONFIG_BOOTARGS "console=ttySC0,38400"
+#define CONFIG_BOOTARGS "console=ttySC0,38400"
#define CONFIG_ENV_OVERWRITE 1
/* SDRAM */
@@ -71,8 +71,8 @@
/* #define CFG_FLASH_BASE (0xA1000000)*/
#define CFG_FLASH_BASE (0xA0000000)
#define CFG_MAX_FLASH_BANKS (1) /* Max number of
- * Flash memory banks
- */
+ * Flash memory banks
+ */
#define CFG_MAX_FLASH_SECT 142
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
@@ -96,7 +96,7 @@
#define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_ERASE_TOUT 120000
#define CFG_FLASH_WRITE_TOUT 500
/* Board Clock */
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index a48893d..d4deda4 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -180,16 +180,16 @@
"if test -n $swapos; then " \
"setenv swapos; saveenv; " \
"else " \
- "if test $ospart -eq 0; then setenv ospart 1;" \
- "else setenv ospart 0; fi; " \
+ "if test $ospart -eq 0; then setenv ospart 1;" \
+ "else setenv ospart 0; fi; " \
"fi\0" \
"nfsargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
"nfsroot=$rootpath root=/dev/nfs\0" \
"flashargs=run setpart;setenv bootargs $bootargs " \
"root=mtd:rootfs$ospart ro " \
"rootfstype=jffs2\0" \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
"fboot=run flashargs;nboot kernel$ospart\0" \
"nboot=bootp;run nfsargs;tftp\0"
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
index 1d691f9..f30cb46 100644
--- a/include/configs/ns9750dev.h
+++ b/include/configs/ns9750dev.h
@@ -62,7 +62,7 @@
/*
* select serial console configuration
*/
-#define CONFIG_CONS_INDEX 1 /* Port B */
+#define CONFIG_CONS_INDEX 1 /* Port B */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
@@ -93,7 +93,7 @@
#define CONFIG_BOOTDELAY 3
-/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
+/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */
#define CONFIG_NETMASK 255.255.255.0
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 45dc343..0dac516 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -138,9 +138,9 @@
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#if defined (CONFIG_P3M750)
-#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (1 device)*/
+#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (1 device) */
#elif defined (CONFIG_P3M7448)
-#define CFG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */
+#define CFG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */
#endif
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index e3c8843..7e393f7 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -228,7 +228,7 @@
#if 0
/* Start port with environment in flash; switch to SPI EEPROM later */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment */
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment */
#define CFG_ENV_ADDR 0xFFFFE000 /* Address of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x2000 /* use the top-most 8k boot sector */
#define CFG_ENV_IS_EMBEDDED 1 /* short-cut compile-time test */
@@ -313,7 +313,7 @@
/* 0x01800000 */
#define CFG_SCCR (SCCR_COM00 | /*SCCR_TBS|*/ \
SCCR_RTDIV | SCCR_RTSEL | \
- /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
+ /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
SCCR_EBDF00 | SCCR_DFSYNC00 | \
SCCR_DFBRG00 | SCCR_DFNL000 | \
SCCR_DFNH000 | SCCR_DFLCD100 | \
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index ac72f98..aca70dc 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -211,7 +211,7 @@
*/
#define CFG_SDR_CONFIG 0x18
#define CFG_SDR_MODE_CONFIG 0x1
-#define CFG_SDRAM_REFRESH_CNT 0x81a
+#define CFG_SDRAM_REFRESH_CNT 0x81a
/*
* FLASH and environment organization
@@ -251,7 +251,7 @@
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
#else
-#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */
#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index fb5ae99..56b4d92 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -237,7 +237,7 @@
/* Define a command string that is automatically executed when no character
* is read on the console interface withing "Boot Delay" after reset.
*/
-#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */
+#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */
#define CONFIG_BOOT_ROOT_NFS /* Use a NFS mounted root file system */
#ifdef CONFIG_BOOT_ROOT_INITRD
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 42787f4..4e89580 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -113,7 +113,7 @@
#define CFG_ENV_SECT_SIZE (16 * 1024)
#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT 120000
+#define CFG_FLASH_ERASE_TOUT 120000
#define CFG_FLASH_WRITE_TOUT 500
/* Board Clock */
diff --git a/include/configs/rmu.h b/include/configs/rmu.h
index 2ca60b7..28fb7c3 100644
--- a/include/configs/rmu.h
+++ b/include/configs/rmu.h
@@ -51,9 +51,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -399,7 +399,7 @@
#define BCSR3 (CFG_BCSR_BASE + 3)
#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
-#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
+#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */
#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */
#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 40a05fa..6251383 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -53,7 +53,7 @@
*/
#undef CONFIG_CONS_ON_SMC /* define if console on SMC */
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on neither */
+#undef CONFIG_CONS_NONE /* define if console on neither */
#define CONFIG_CONS_INDEX 1 /* which SMC/SCC channel for console */
/*
@@ -91,7 +91,7 @@
#define CONFIG_ENV_OVERWRITE
/* enable I2C */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#define CFG_I2C_SPEED 50000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x30
@@ -128,7 +128,7 @@
#define CFG_RSD_BOOT_LOW 1
#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTARGS "devfs=mount root=ramfs"
+#define CONFIG_BOOTARGS "devfs=mount root=ramfs"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5a
#define CONFIG_NETMASK 255.255.0.0
@@ -176,14 +176,14 @@
#define PHYS_SDRAM_LOCAL 0x40000000 /* SDRAM (Local Bus) */
#define PHYS_SDRAM_LOCAL_SIZE 0x04000000 /* 64 MB */
-#define PHYS_DPRAM_PCI 0xE8000000 /* DPRAM PPC/PCI */
-#define PHYS_DPRAM_PCI_SIZE 0x00020000 /* 128 KB */
+#define PHYS_DPRAM_PCI 0xE8000000 /* DPRAM PPC/PCI */
+#define PHYS_DPRAM_PCI_SIZE 0x00020000 /* 128 KB */
/*#define PHYS_DPRAM_PCI_SEM 0x04020000 / * DPRAM PPC/PCI Semaphore */
/*#define PHYS_DPRAM_PCI_SEM_SIZE 0x00000001 / * 1 Byte */
-#define PHYS_DPRAM_SHARC 0xE8100000 /* DPRAM PPC/Sharc */
-#define PHYS_DPRAM_SHARC_SIZE 0x00040000 /* 256 KB */
+#define PHYS_DPRAM_SHARC 0xE8100000 /* DPRAM PPC/Sharc */
+#define PHYS_DPRAM_SHARC_SIZE 0x00040000 /* 256 KB */
/*#define PHYS_DPRAM_SHARC_SEM 0x04140000 / * DPRAM PPC/Sharc Semaphore */
/*#define PHYS_DPRAM_SHARC_SEM_SIZE 0x00000001 / * 1 Byte */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index ec7d34a..4974fb4 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -441,7 +441,7 @@
/* Define a command string that is automatically executed when no character
* is read on the console interface withing "Boot Delay" after reset.
*/
-#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */
+#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */
#define CONFIG_BOOT_ROOT_NFS /* Use a NFS mounted root file system */
#ifdef CONFIG_BOOT_ROOT_INITRD
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index 9b05bd6..08cadf6 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -106,7 +106,9 @@
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
+#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs " \
+ "nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv " \
+ "ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.0.69
@@ -205,7 +207,7 @@
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index 6063398..7993137 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -387,7 +387,7 @@
/* Define a command string that is automatically executed when no character
* is read on the console interface withing "Boot Delay" after reset.
*/
-#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */
+#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */
#define CONFIG_BOOT_ROOT_NFS /* Use a NFS mounted root file system */
#ifdef CONFIG_BOOT_ROOT_INITRD
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index c84b70a..358fc02 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -176,7 +176,7 @@
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 20da73e..3cd9ff8 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -55,13 +55,13 @@
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/
#undef CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_NUM_DDR_CONTROLLERS 2
@@ -94,7 +94,7 @@
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -219,7 +219,7 @@
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
@@ -236,14 +236,14 @@
#else
#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */
#endif
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 1
@@ -323,7 +323,7 @@
#undef CFG_SCSI_SCAN_BUS_REVERSE
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -331,7 +331,7 @@
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
@@ -343,7 +343,7 @@
#define CONFIG_SATA_ULI5288
#define CFG_SCSI_MAX_SCSI_ID 4
#define CFG_SCSI_MAX_LUN 1
-#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
#endif
@@ -352,7 +352,7 @@
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
/* #define CONFIG_MII 1 */ /* MII PHY management */
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 4df461d..0e830b8 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -87,7 +87,7 @@
#define CONFIG_CMD_EEPROM
#define CONFIG_BOOTDELAY 15
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600"
/* #define CONFIG_BOOTCOMMAND "bootm 38000000" */
#if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index c6f7f15..051b2e0 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -88,8 +88,12 @@
#define CONFIG_BOOTDELAY 15
-#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
-#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 " \
+ "mtdparts=phys:7936k(root),256k(uboot) "
+#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf " \
+ "console=ttyS0,9600 " \
+ "mtdparts=phys:7808k(root),128k(env),256k(uboot);" \
+ "bootp;bootm"
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 555316f..48251f3 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -318,7 +318,7 @@
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx */
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx */
/* buffers & descriptors */
#define CONFIG_NET_MULTI 1
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
@@ -417,7 +417,7 @@
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
- /* Print Buffer Size */
+ /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -443,7 +443,7 @@
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */
/* CFG_PCI_MEMBASE */
/* Board-specific PCI */
#define CFG_PCI_TARGET_INIT
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index c1fa53f..8bbc730 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -83,7 +83,7 @@
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
+#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_BOOTCOMMAND "help"
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index 05f6053..ac1642e 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -114,17 +114,9 @@
#define CONFIG_BOOTDELAY 3
-#if 0
-#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600"
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#endif
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 134.98.93.36
#define CONFIG_SERVERIP 134.98.93.22
-#if 0
-#define CONFIG_BOOTFILE "elinos-lart"
-#define CONFIG_BOOTCOMMAND "tftp; bootm"
-#endif
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 18a036c..efe4693 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -93,7 +93,7 @@
#define CONFIG_BOOTDELAY 3
-/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
+/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.0.0.110
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index b622a30..c62b977 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -189,7 +189,7 @@
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \
CFG_FLASH_BASE+0x04000000 } /* two banks */
/*
@@ -243,12 +243,12 @@
/* SDRAM configuration (for SPD) */
#define CFG_SDRAM_TOTAL_BANKS 1
-#define CFG_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */
+#define CFG_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */
#define CFG_SDRAM_SPD_SIZE 0x100
-#define CFG_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */
+#define CFG_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */
/* SDRAM drive strength register (for SSTL_2 class II)*/
-#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \
+#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \
(DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
(DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \
(DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \
@@ -285,7 +285,7 @@
#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
#if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index fc5d0cc..ec04a30 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -42,8 +42,8 @@
#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/
-#undef CONFIG_PCI /* pci ethernet support */
-#define CONFIG_TSEC_ENET /* tsec ethernet support*/
+#undef CONFIG_PCI /* pci ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support*/
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
@@ -100,7 +100,7 @@
#define CFG_OR1_PRELIM 0xffff0ff7 /* 64K is enough */
#define CFG_LBC_LCLDEVS_BASE 0xfc000000 /* Base of localbus devices */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
@@ -109,9 +109,9 @@
#endif
#ifdef CFG_RAMBOOT
-#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
+#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
#else
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#endif
#define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
@@ -129,14 +129,14 @@
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
-#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */
+#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */
#undef CONFIG_CLOCKS_IN_MHZ
/* local bus definitions */
#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
#define CFG_OR2_PRELIM 0xfc006901
-#define CFG_LBC_LCRR 0x00030004 /* local bus freq */
+#define CFG_LBC_LCRR 0x00030004 /* local bus freq */
#define CFG_LBC_LBCR 0x00000000
#define CFG_LBC_LSRT 0x20000000
#define CFG_LBC_MRTPR 0x20000000
@@ -147,23 +147,23 @@
#define CFG_LBC_LSDMR_5 0x4061b723
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_LOCK 1
#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
-#define CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
-#define CONFIG_CONS_INDEX 2 /* which serial channel for console */
+#define CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on something else */
+#define CONFIG_CONS_INDEX 2 /* which serial channel for console */
-#define CONFIG_BAUDRATE 38400
+#define CONFIG_BAUDRATE 38400
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
@@ -205,18 +205,18 @@
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE 0x01000000 /* 16 M */
-#if defined(CONFIG_PCI) /* PCI Ethernet card */
+#if defined(CONFIG_PCI) /* PCI Ethernet card */
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
+ #define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
#undef CONFIG_PCI_SCAN_SHOW
@@ -227,7 +227,7 @@
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
@@ -270,7 +270,7 @@
#elif (CONFIG_ETHER_INDEX == 3)
/* need more definitions here for FE3 */
#define FETH3_RST 0x80
-#endif /* CONFIG_ETHER_INDEX */
+#endif /* CONFIG_ETHER_INDEX */
/* MDIO is done through the TSEC0 control.
*/
@@ -375,20 +375,20 @@
/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
#define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
+#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b
+#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b
#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c
+#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c
#endif
-#define CONFIG_SERVERIP 192.168.85.1
-#define CONFIG_IPADDR 192.168.85.60
+#define CONFIG_SERVERIP 192.168.85.1
+#define CONFIG_IPADDR 192.168.85.60
#define CONFIG_GATEWAYIP 192.168.85.1
#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_HOSTNAME STX_GP3
-#define CONFIG_ROOTPATH /gppproot
-#define CONFIG_BOOTFILE uImage
+#define CONFIG_HOSTNAME STX_GP3
+#define CONFIG_ROOTPATH /gppproot
+#define CONFIG_BOOTFILE uImage
#define CONFIG_LOADADDR 0x1000000
#endif /* __CONFIG_H */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 15f690a..d033c86 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -69,10 +69,10 @@
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#undef CFG_DRAM_TEST /* memory test, takes time */
-#define CFG_MEMTEST_START 0x00200000 /* memtest region */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest region */
#define CFG_MEMTEST_END 0x00400000
@@ -232,7 +232,7 @@
#define CFG_PCI2_IO_PHYS 0xe3000000
#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */
-#if defined(CONFIG_PCI) /* PCI Ethernet card */
+#if defined(CONFIG_PCI) /* PCI Ethernet card */
#define CONFIG_MPC85XX_PCI2 1
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
@@ -428,13 +428,13 @@
#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
#define CONFIG_BOOTCOMMAND "bootm 0xffc00000 0xffd00000"
#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
-#define CONFIG_SERVERIP 192.168.85.1
+#define CONFIG_SERVERIP 192.168.85.1
#define CONFIG_IPADDR 192.168.85.60
#define CONFIG_GATEWAYIP 192.168.85.1
#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_HOSTNAME STX_SSA
-#define CONFIG_ROOTPATH /gppproot
-#define CONFIG_BOOTFILE uImage
+#define CONFIG_HOSTNAME STX_SSA
+#define CONFIG_ROOTPATH /gppproot
+#define CONFIG_BOOTFILE uImage
#define CONFIG_LOADADDR 0x1000000
#else /* ENV IS IN FLASH -- use a full-blown envionment */
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index a3ab798..97a1032 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -63,9 +63,9 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "tftpboot; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_AUTOSCRIPT
@@ -93,7 +93,7 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
+#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define FEC_ENET 1 /* eth.c needs it that way... */
#undef CFG_DISCOVER_PHY
#define CONFIG_MII 1
@@ -101,7 +101,7 @@
#undef CONFIG_RMII
#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 1 /* phy address of FEC */
+#define CONFIG_FEC1_PHY 1 /* phy address of FEC */
#undef CONFIG_FEC1_PHY_NORXERR
#define CONFIG_ETHER_ON_FEC2 1
@@ -214,7 +214,7 @@
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
-#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
+#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
@@ -283,11 +283,11 @@
#if MPC8XX_HZ == 50000000
#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#elif MPC8XX_HZ == 66666666
#define CFG_PLPRCR ((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \
(1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
+ PLPRCR_TEXPS)
#else
#error unsupported CPU freq for XIN = 10MHz
#endif
@@ -462,7 +462,7 @@
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 3b90f3c..70336b5 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -68,7 +68,7 @@
#undef CONFIG_WATCHDOG /* watchdog */
-#define CONFIG_SVM_SC8xx 1 /* ...on SVM SC8xx series */
+#define CONFIG_SVM_SC8xx 1 /* ...on SVM SC8xx series */
#ifdef CONFIG_LCD /* with LCD controller ? */
/* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display */
@@ -109,8 +109,8 @@
"ramdisk_addr=48100000\0" \
""
#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"tftpboot 0x210000 pImage-sc855t;bootm 0x210000"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -363,14 +363,14 @@
*-----------------------------------------------------------------------
*/
-#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
#define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */
#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
#define CFG_ATA_BASE_ADDR 0xFE100010
#define CFG_ATA_IDE0_OFFSET 0x0000
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
index 8a1ff1a..c060b1e 100644
--- a/include/configs/taihu.h
+++ b/include/configs/taihu.h
@@ -363,7 +363,7 @@ unsigned char spi_read(void);
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \
diff --git a/include/configs/trab.h b/include/configs/trab.h
index b9088a8..de36fca 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -69,8 +69,8 @@
* address 0x54 with 8bit addressing
***********************************************************/
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#define CFG_I2C_SPEED 100000 /* I2C speed */
-#define CFG_I2C_SLAVE 0x7F /* I2C slave addr */
+#define CFG_I2C_SPEED 100000 /* I2C speed */
+#define CFG_I2C_SLAVE 0x7F /* I2C slave addr */
#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM address */
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* 1 address byte */
@@ -237,7 +237,7 @@
"mdm_init2=ATS0=1\0" \
"mdm_flow_control=rts/cts\0"
#endif /* CFG_HUSH_PARSER */
-#else /* CONFIG_FLASH_8MB => 8 MB flash */
+#else /* CONFIG_FLASH_8MB => 8 MB flash */
#ifdef CFG_HUSH_PARSER
#define CONFIG_EXTRA_ENV_SETTINGS \
"nfs_args=setenv bootargs root=/dev/nfs rw " \
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 7a15d97..25155ad 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -303,7 +303,7 @@
#define CFG_MONITOR_LEN 0x40000
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
@@ -314,8 +314,8 @@
/* Flash environment locations */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */
-#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment */
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */
+#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment */
#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 3c2de40..e74b1bb 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -243,7 +243,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (CFG_MONITOR_BASE+CFG_MONITOR_LEN)
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index cd00c49..287a618 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -58,7 +58,7 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 2
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
#define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */
#define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */
@@ -255,7 +255,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
mem_freq = 100MHz */
#define CFG_BANK7_ROW 0 /* SDRAM bank 7-0 row address */
-#define CFG_BANK6_ROW 0 /* bit count */
+#define CFG_BANK6_ROW 0 /* bit count */
#define CFG_BANK5_ROW 0
#define CFG_BANK4_ROW 0
#define CFG_BANK3_ROW 0
@@ -278,7 +278,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
#define CFG_ACTTOPRE 7 /* trcd + (burst length - 1) + trdl */
#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type, sequential */
-#define CFG_ACTORW 2 /* trcd min */
+#define CFG_ACTORW 2 /* trcd min */
#define CFG_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */
#define CFG_REGISTERD_TYPE_BUFFER 1
#define CFG_EXTROM 0 /* we don't need extended ROM space */
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 47851c2..751d702 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -34,7 +34,7 @@
*/
#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
-#define CONFIG_V37 1 /* ...on a Marel V37 board */
+#define CONFIG_V37 1 /* ...on a Marel V37 board */
#define CONFIG_LCD
#define CONFIG_SHARP_LQ084V1DG21
@@ -63,10 +63,10 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
+ "tftpboot; " \
"setenv bootargs console=tty0 " \
- "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -333,7 +333,7 @@
#define CFG_PRELIM_OR_AM 0xFE000000 /* OR addr mask */
-#define CFG_OR_TIMING_FLASH 0xF56
+#define CFG_OR_TIMING_FLASH 0xF56
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V)
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index d250150..a88d356 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -80,7 +80,7 @@
#define CONFIG_DRIVER_SMC91111
#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC91111_BASE 0x10010000
+#define CONFIG_SMC91111_BASE 0x10010000
#undef CONFIG_SMC91111_EXT_PHY
/*
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index c67b301..f2efe9f 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -132,9 +132,9 @@
/*
* Configuration for FLASH memory
*/
-#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
-#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
-#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
+#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
#define WEP_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank*/
#define WEP_FLASH_SECT_SIZE 0x0040000 /* size of erase sector */
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 7418986..dc0ee0b2 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -97,7 +97,7 @@
#define CONFIG_BOOTCOMMAND "bootm 0x00100000"
#define CONFIG_BOOTARGS "console=ttyS1,115200"
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index c738567..570d6a8 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -124,7 +124,7 @@
* 0x3FFB_F000 CFG_MONITOR_BASE
* MONITOR_CODE 256kB Env
* 0x3FFF_F000 CFG_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
+ * GLOBAL_DATA 4kB bd, gd
* 0x4000_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
*/
@@ -194,13 +194,13 @@
#define CFG_LONGHELP
#define CFG_LOAD_ADDR 0x12000000 /* default load address */
-#define CONFIG_BOOTDELAY 30
+#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
#define CONFIG_HOSTNAME "xupv2p"
-#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
+#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
-#define CONFIG_SERVERIP 192.168.0.5
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.5
+#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
/* architecture dependent code */
diff --git a/include/div64.h b/include/div64.h
index 2e0ba83..c495aef 100644
--- a/include/div64.h
+++ b/include/div64.h
@@ -8,9 +8,9 @@
*
* uint32_t do_div(uint64_t *n, uint32_t base)
* {
- * uint32_t remainder = *n % base;
- * *n = *n / base;
- * return remainder;
+ * uint32_t remainder = *n % base;
+ * *n = *n / base;
+ * return remainder;
* }
*
* NOTE: macro parameter n is evaluated multiple times,
@@ -31,7 +31,7 @@ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
if (((n) >> 32) == 0) { \
__rem = (uint32_t)(n) % __base; \
(n) = (uint32_t)(n) / __base; \
- } else \
+ } else \
__rem = __div64_32(&(n), __base); \
__rem; \
})
diff --git a/include/dm9161.h b/include/dm9161.h
index d5d0e8d..218f15c 100644
--- a/include/dm9161.h
+++ b/include/dm9161.h
@@ -15,7 +15,7 @@
/* DAVICOM PHYSICAL LAYER TRANSCEIVER DM9161 */
-#define DM9161_BMCR 0 /* Basic Mode Control Register */
+#define DM9161_BMCR 0 /* Basic Mode Control Register */
#define DM9161_BMSR 1 /* Basic Mode Status Register */
#define DM9161_PHYID1 2 /* PHY Idendifier Register 1 */
#define DM9161_PHYID2 3 /* PHY Idendifier Register 2 */
@@ -32,7 +32,7 @@
/* --Bit definitions: DM9161_BMCR */
-#define DM9161_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */
+#define DM9161_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */
#define DM9161_LOOPBACK (1 << 14) /* 1=loopback Enabled; 0=Normal Operation */
#define DM9161_SPEED_SELECT (1 << 13) /* 1=100Mbps; 0=10Mbps */
#define DM9161_AUTONEG (1 << 12)
diff --git a/include/elf.h b/include/elf.h
index d0febc5..a9839df 100644
--- a/include/elf.h
+++ b/include/elf.h
@@ -43,9 +43,9 @@
#include <stdint.h>
#elif defined(__WIN32__)
#include <unistd.h>
-typedef unsigned char uint8_t;
-typedef unsigned short uint16_t;
-typedef unsigned int uint32_t;
+typedef unsigned char uint8_t;
+typedef unsigned short uint16_t;
+typedef unsigned int uint32_t;
#endif
/*
@@ -415,7 +415,7 @@ typedef struct
/* Extract relocation info - r_info */
#define ELF32_R_SYM(i) ((i) >> 8)
#define ELF32_R_TYPE(i) ((unsigned char) (i))
-#define ELF32_R_INFO(s,t) (((s) << 8) + (unsigned char)(t))
+#define ELF32_R_INFO(s,t) (((s) << 8) + (unsigned char)(t))
/* Program Header */
typedef struct {
diff --git a/include/fat.h b/include/fat.h
index f993cca..59de3fb 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -101,7 +101,7 @@
#else
#define FAT2CPU16(x) ((((x) & 0x00ff) << 8) | (((x) & 0xff00) >> 8))
#define FAT2CPU32(x) ((((x) & 0x000000ff) << 24) | \
- (((x) & 0x0000ff00) << 8) | \
+ (((x) & 0x0000ff00) << 8) | \
(((x) & 0x00ff0000) >> 8) | \
(((x) & 0xff000000) >> 24))
#endif
diff --git a/include/flash.h b/include/flash.h
index 2ed1e20..af8a7c0 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -51,10 +51,10 @@ typedef struct {
ushort device_id2; /* extended device id */
ushort ext_addr; /* extended query table address */
ushort cfi_version; /* cfi version */
- ushort cfi_offset; /* offset for cfi query */
+ ushort cfi_offset; /* offset for cfi query */
ulong addr_unlock1; /* unlock address 1 for AMD flash roms */
ulong addr_unlock2; /* unlock address 2 for AMD flash roms */
- const char *name; /* human-readable name */
+ const char *name; /* human-readable name */
#endif
} flash_info_t;
diff --git a/include/fpga.h b/include/fpga.h
index a038aa1..52d93b1 100644
--- a/include/fpga.h
+++ b/include/fpga.h
@@ -22,7 +22,7 @@
*
*/
-#include <linux/types.h> /* for ulong typedef */
+#include <linux/types.h> /* for ulong typedef */
#ifndef _FPGA_H_
#define _FPGA_H_
@@ -33,41 +33,41 @@
/* these probably belong somewhere else */
#ifndef FALSE
-#define FALSE (0)
+#define FALSE (0)
#endif
#ifndef TRUE
-#define TRUE (!FALSE)
+#define TRUE (!FALSE)
#endif
/* CONFIG_FPGA bit assignments */
-#define CFG_FPGA_MAN(x) (x)
-#define CFG_FPGA_DEV(x) ((x) << 8 )
-#define CFG_FPGA_IF(x) ((x) << 16 )
+#define CFG_FPGA_MAN(x) (x)
+#define CFG_FPGA_DEV(x) ((x) << 8 )
+#define CFG_FPGA_IF(x) ((x) << 16 )
/* FPGA Manufacturer bits in CONFIG_FPGA */
-#define CFG_FPGA_XILINX CFG_FPGA_MAN( 0x1 )
-#define CFG_FPGA_ALTERA CFG_FPGA_MAN( 0x2 )
+#define CFG_FPGA_XILINX CFG_FPGA_MAN( 0x1 )
+#define CFG_FPGA_ALTERA CFG_FPGA_MAN( 0x2 )
/* fpga_xxxx function return value definitions */
-#define FPGA_SUCCESS 0
-#define FPGA_FAIL -1
+#define FPGA_SUCCESS 0
+#define FPGA_FAIL -1
/* device numbers must be non-negative */
-#define FPGA_INVALID_DEVICE -1
+#define FPGA_INVALID_DEVICE -1
/* root data type defintions */
-typedef enum { /* typedef fpga_type */
- fpga_min_type, /* range check value */
- fpga_xilinx, /* Xilinx Family) */
- fpga_altera, /* unimplemented */
- fpga_undefined /* invalid range check value */
-} fpga_type; /* end, typedef fpga_type */
+typedef enum { /* typedef fpga_type */
+ fpga_min_type, /* range check value */
+ fpga_xilinx, /* Xilinx Family) */
+ fpga_altera, /* unimplemented */
+ fpga_undefined /* invalid range check value */
+} fpga_type; /* end, typedef fpga_type */
-typedef struct { /* typedef fpga_desc */
- fpga_type devtype; /* switch value to select sub-functions */
- void * devdesc; /* real device descriptor */
-} fpga_desc; /* end, typedef fpga_desc */
+typedef struct { /* typedef fpga_desc */
+ fpga_type devtype; /* switch value to select sub-functions */
+ void *devdesc; /* real device descriptor */
+} fpga_desc; /* end, typedef fpga_desc */
/* root function definitions */
diff --git a/include/galileo/gt64260R.h b/include/galileo/gt64260R.h
index ebf087a..c2cfb06 100644
--- a/include/galileo/gt64260R.h
+++ b/include/galileo/gt64260R.h
@@ -14,154 +14,154 @@
#define CPU_MASTER_CONTROL 0x160
/****************************************/
-/* Processor Address Space */
+/* Processor Address Space */
/****************************************/
/* Sdram's BAR'S */
-#define SCS_0_LOW_DECODE_ADDRESS 0x008
-#define SCS_0_HIGH_DECODE_ADDRESS 0x010
-#define SCS_1_LOW_DECODE_ADDRESS 0x208
-#define SCS_1_HIGH_DECODE_ADDRESS 0x210
-#define SCS_2_LOW_DECODE_ADDRESS 0x018
-#define SCS_2_HIGH_DECODE_ADDRESS 0x020
-#define SCS_3_LOW_DECODE_ADDRESS 0x218
-#define SCS_3_HIGH_DECODE_ADDRESS 0x220
+#define SCS_0_LOW_DECODE_ADDRESS 0x008
+#define SCS_0_HIGH_DECODE_ADDRESS 0x010
+#define SCS_1_LOW_DECODE_ADDRESS 0x208
+#define SCS_1_HIGH_DECODE_ADDRESS 0x210
+#define SCS_2_LOW_DECODE_ADDRESS 0x018
+#define SCS_2_HIGH_DECODE_ADDRESS 0x020
+#define SCS_3_LOW_DECODE_ADDRESS 0x218
+#define SCS_3_HIGH_DECODE_ADDRESS 0x220
/* Devices BAR'S */
-#define CS_0_LOW_DECODE_ADDRESS 0x028
-#define CS_0_HIGH_DECODE_ADDRESS 0x030
-#define CS_1_LOW_DECODE_ADDRESS 0x228
-#define CS_1_HIGH_DECODE_ADDRESS 0x230
-#define CS_2_LOW_DECODE_ADDRESS 0x248
-#define CS_2_HIGH_DECODE_ADDRESS 0x250
-#define CS_3_LOW_DECODE_ADDRESS 0x038
-#define CS_3_HIGH_DECODE_ADDRESS 0x040
-#define BOOTCS_LOW_DECODE_ADDRESS 0x238
-#define BOOTCS_HIGH_DECODE_ADDRESS 0x240
-
-#define PCI_0I_O_LOW_DECODE_ADDRESS 0x048
-#define PCI_0I_O_HIGH_DECODE_ADDRESS 0x050
-#define PCI_0MEMORY0_LOW_DECODE_ADDRESS 0x058
-#define PCI_0MEMORY0_HIGH_DECODE_ADDRESS 0x060
-#define PCI_0MEMORY1_LOW_DECODE_ADDRESS 0x080
-#define PCI_0MEMORY1_HIGH_DECODE_ADDRESS 0x088
-#define PCI_0MEMORY2_LOW_DECODE_ADDRESS 0x258
-#define PCI_0MEMORY2_HIGH_DECODE_ADDRESS 0x260
-#define PCI_0MEMORY3_LOW_DECODE_ADDRESS 0x280
-#define PCI_0MEMORY3_HIGH_DECODE_ADDRESS 0x288
-
-#define PCI_1I_O_LOW_DECODE_ADDRESS 0x090
-#define PCI_1I_O_HIGH_DECODE_ADDRESS 0x098
-#define PCI_1MEMORY0_LOW_DECODE_ADDRESS 0x0a0
-#define PCI_1MEMORY0_HIGH_DECODE_ADDRESS 0x0a8
-#define PCI_1MEMORY1_LOW_DECODE_ADDRESS 0x0b0
-#define PCI_1MEMORY1_HIGH_DECODE_ADDRESS 0x0b8
-#define PCI_1MEMORY2_LOW_DECODE_ADDRESS 0x2a0
-#define PCI_1MEMORY2_HIGH_DECODE_ADDRESS 0x2a8
-#define PCI_1MEMORY3_LOW_DECODE_ADDRESS 0x2b0
-#define PCI_1MEMORY3_HIGH_DECODE_ADDRESS 0x2b8
+#define CS_0_LOW_DECODE_ADDRESS 0x028
+#define CS_0_HIGH_DECODE_ADDRESS 0x030
+#define CS_1_LOW_DECODE_ADDRESS 0x228
+#define CS_1_HIGH_DECODE_ADDRESS 0x230
+#define CS_2_LOW_DECODE_ADDRESS 0x248
+#define CS_2_HIGH_DECODE_ADDRESS 0x250
+#define CS_3_LOW_DECODE_ADDRESS 0x038
+#define CS_3_HIGH_DECODE_ADDRESS 0x040
+#define BOOTCS_LOW_DECODE_ADDRESS 0x238
+#define BOOTCS_HIGH_DECODE_ADDRESS 0x240
+
+#define PCI_0I_O_LOW_DECODE_ADDRESS 0x048
+#define PCI_0I_O_HIGH_DECODE_ADDRESS 0x050
+#define PCI_0MEMORY0_LOW_DECODE_ADDRESS 0x058
+#define PCI_0MEMORY0_HIGH_DECODE_ADDRESS 0x060
+#define PCI_0MEMORY1_LOW_DECODE_ADDRESS 0x080
+#define PCI_0MEMORY1_HIGH_DECODE_ADDRESS 0x088
+#define PCI_0MEMORY2_LOW_DECODE_ADDRESS 0x258
+#define PCI_0MEMORY2_HIGH_DECODE_ADDRESS 0x260
+#define PCI_0MEMORY3_LOW_DECODE_ADDRESS 0x280
+#define PCI_0MEMORY3_HIGH_DECODE_ADDRESS 0x288
+
+#define PCI_1I_O_LOW_DECODE_ADDRESS 0x090
+#define PCI_1I_O_HIGH_DECODE_ADDRESS 0x098
+#define PCI_1MEMORY0_LOW_DECODE_ADDRESS 0x0a0
+#define PCI_1MEMORY0_HIGH_DECODE_ADDRESS 0x0a8
+#define PCI_1MEMORY1_LOW_DECODE_ADDRESS 0x0b0
+#define PCI_1MEMORY1_HIGH_DECODE_ADDRESS 0x0b8
+#define PCI_1MEMORY2_LOW_DECODE_ADDRESS 0x2a0
+#define PCI_1MEMORY2_HIGH_DECODE_ADDRESS 0x2a8
+#define PCI_1MEMORY3_LOW_DECODE_ADDRESS 0x2b0
+#define PCI_1MEMORY3_HIGH_DECODE_ADDRESS 0x2b8
-#define INTERNAL_SPACE_DECODE 0x068
+#define INTERNAL_SPACE_DECODE 0x068
-#define CPU_0_LOW_DECODE_ADDRESS 0x290
-#define CPU_0_HIGH_DECODE_ADDRESS 0x298
-#define CPU_1_LOW_DECODE_ADDRESS 0x2c0
-#define CPU_1_HIGH_DECODE_ADDRESS 0x2c8
+#define CPU_0_LOW_DECODE_ADDRESS 0x290
+#define CPU_0_HIGH_DECODE_ADDRESS 0x298
+#define CPU_1_LOW_DECODE_ADDRESS 0x2c0
+#define CPU_1_HIGH_DECODE_ADDRESS 0x2c8
-#define PCI_0I_O_ADDRESS_REMAP 0x0f0
-#define PCI_0MEMORY0_ADDRESS_REMAP 0x0f8
-#define PCI_0MEMORY0_HIGH_ADDRESS_REMAP 0x320
-#define PCI_0MEMORY1_ADDRESS_REMAP 0x100
-#define PCI_0MEMORY1_HIGH_ADDRESS_REMAP 0x328
-#define PCI_0MEMORY2_ADDRESS_REMAP 0x2f8
-#define PCI_0MEMORY2_HIGH_ADDRESS_REMAP 0x330
-#define PCI_0MEMORY3_ADDRESS_REMAP 0x300
-#define PCI_0MEMORY3_HIGH_ADDRESS_REMAP 0x338
+#define PCI_0I_O_ADDRESS_REMAP 0x0f0
+#define PCI_0MEMORY0_ADDRESS_REMAP 0x0f8
+#define PCI_0MEMORY0_HIGH_ADDRESS_REMAP 0x320
+#define PCI_0MEMORY1_ADDRESS_REMAP 0x100
+#define PCI_0MEMORY1_HIGH_ADDRESS_REMAP 0x328
+#define PCI_0MEMORY2_ADDRESS_REMAP 0x2f8
+#define PCI_0MEMORY2_HIGH_ADDRESS_REMAP 0x330
+#define PCI_0MEMORY3_ADDRESS_REMAP 0x300
+#define PCI_0MEMORY3_HIGH_ADDRESS_REMAP 0x338
-#define PCI_1I_O_ADDRESS_REMAP 0x108
-#define PCI_1MEMORY0_ADDRESS_REMAP 0x110
-#define PCI_1MEMORY0_HIGH_ADDRESS_REMAP 0x340
-#define PCI_1MEMORY1_ADDRESS_REMAP 0x118
-#define PCI_1MEMORY1_HIGH_ADDRESS_REMAP 0x348
-#define PCI_1MEMORY2_ADDRESS_REMAP 0x310
-#define PCI_1MEMORY2_HIGH_ADDRESS_REMAP 0x350
-#define PCI_1MEMORY3_ADDRESS_REMAP 0x318
-#define PCI_1MEMORY3_HIGH_ADDRESS_REMAP 0x358
+#define PCI_1I_O_ADDRESS_REMAP 0x108
+#define PCI_1MEMORY0_ADDRESS_REMAP 0x110
+#define PCI_1MEMORY0_HIGH_ADDRESS_REMAP 0x340
+#define PCI_1MEMORY1_ADDRESS_REMAP 0x118
+#define PCI_1MEMORY1_HIGH_ADDRESS_REMAP 0x348
+#define PCI_1MEMORY2_ADDRESS_REMAP 0x310
+#define PCI_1MEMORY2_HIGH_ADDRESS_REMAP 0x350
+#define PCI_1MEMORY3_ADDRESS_REMAP 0x318
+#define PCI_1MEMORY3_HIGH_ADDRESS_REMAP 0x358
/****************************************/
-/* CPU Sync Barrier */
+/* CPU Sync Barrier */
/****************************************/
-#define PCI_0SYNC_BARIER_VIRTUAL_REGISTER 0x0c0
-#define PCI_1SYNC_BARIER_VIRTUAL_REGISTER 0x0c8
+#define PCI_0SYNC_BARIER_VIRTUAL_REGISTER 0x0c0
+#define PCI_1SYNC_BARIER_VIRTUAL_REGISTER 0x0c8
/****************************************/
-/* CPU Access Protect */
+/* CPU Access Protect */
/****************************************/
-#define CPU_LOW_PROTECT_ADDRESS_0 0x180
-#define CPU_HIGH_PROTECT_ADDRESS_0 0x188
-#define CPU_LOW_PROTECT_ADDRESS_1 0x190
-#define CPU_HIGH_PROTECT_ADDRESS_1 0x198
-#define CPU_LOW_PROTECT_ADDRESS_2 0x1a0
-#define CPU_HIGH_PROTECT_ADDRESS_2 0x1a8
-#define CPU_LOW_PROTECT_ADDRESS_3 0x1b0
-#define CPU_HIGH_PROTECT_ADDRESS_3 0x1b8
-#define CPU_LOW_PROTECT_ADDRESS_4 0x1c0
-#define CPU_HIGH_PROTECT_ADDRESS_4 0x1c8
-#define CPU_LOW_PROTECT_ADDRESS_5 0x1d0
-#define CPU_HIGH_PROTECT_ADDRESS_5 0x1d8
-#define CPU_LOW_PROTECT_ADDRESS_6 0x1e0
-#define CPU_HIGH_PROTECT_ADDRESS_6 0x1e8
-#define CPU_LOW_PROTECT_ADDRESS_7 0x1f0
-#define CPU_HIGH_PROTECT_ADDRESS_7 0x1f8
+#define CPU_LOW_PROTECT_ADDRESS_0 0x180
+#define CPU_HIGH_PROTECT_ADDRESS_0 0x188
+#define CPU_LOW_PROTECT_ADDRESS_1 0x190
+#define CPU_HIGH_PROTECT_ADDRESS_1 0x198
+#define CPU_LOW_PROTECT_ADDRESS_2 0x1a0
+#define CPU_HIGH_PROTECT_ADDRESS_2 0x1a8
+#define CPU_LOW_PROTECT_ADDRESS_3 0x1b0
+#define CPU_HIGH_PROTECT_ADDRESS_3 0x1b8
+#define CPU_LOW_PROTECT_ADDRESS_4 0x1c0
+#define CPU_HIGH_PROTECT_ADDRESS_4 0x1c8
+#define CPU_LOW_PROTECT_ADDRESS_5 0x1d0
+#define CPU_HIGH_PROTECT_ADDRESS_5 0x1d8
+#define CPU_LOW_PROTECT_ADDRESS_6 0x1e0
+#define CPU_HIGH_PROTECT_ADDRESS_6 0x1e8
+#define CPU_LOW_PROTECT_ADDRESS_7 0x1f0
+#define CPU_HIGH_PROTECT_ADDRESS_7 0x1f8
/****************************************/
-/* Snoop Control */
+/* Snoop Control */
/****************************************/
-#define SNOOP_BASE_ADDRESS_0 0x380
-#define SNOOP_TOP_ADDRESS_0 0x388
-#define SNOOP_BASE_ADDRESS_1 0x390
-#define SNOOP_TOP_ADDRESS_1 0x398
-#define SNOOP_BASE_ADDRESS_2 0x3a0
-#define SNOOP_TOP_ADDRESS_2 0x3a8
-#define SNOOP_BASE_ADDRESS_3 0x3b0
-#define SNOOP_TOP_ADDRESS_3 0x3b8
+#define SNOOP_BASE_ADDRESS_0 0x380
+#define SNOOP_TOP_ADDRESS_0 0x388
+#define SNOOP_BASE_ADDRESS_1 0x390
+#define SNOOP_TOP_ADDRESS_1 0x398
+#define SNOOP_BASE_ADDRESS_2 0x3a0
+#define SNOOP_TOP_ADDRESS_2 0x3a8
+#define SNOOP_BASE_ADDRESS_3 0x3b0
+#define SNOOP_TOP_ADDRESS_3 0x3b8
/****************************************/
-/* CPU Error Report */
+/* CPU Error Report */
/****************************************/
-#define CPU_ERROR_ADDRESS_LOW 0x070
-#define CPU_ERROR_ADDRESS_HIGH 0x078
-#define CPU_ERROR_DATA_LOW 0x128
-#define CPU_ERROR_DATA_HIGH 0x130
-#define CPU_ERROR_PARITY 0x138
-#define CPU_ERROR_CAUSE 0x140
-#define CPU_ERROR_MASK 0x148
+#define CPU_ERROR_ADDRESS_LOW 0x070
+#define CPU_ERROR_ADDRESS_HIGH 0x078
+#define CPU_ERROR_DATA_LOW 0x128
+#define CPU_ERROR_DATA_HIGH 0x130
+#define CPU_ERROR_PARITY 0x138
+#define CPU_ERROR_CAUSE 0x140
+#define CPU_ERROR_MASK 0x148
/****************************************/
-/* Pslave Debug */
+/* Pslave Debug */
/****************************************/
-#define X_0_ADDRESS 0x360
-#define X_0_COMMAND_ID 0x368
-#define X_1_ADDRESS 0x370
-#define X_1_COMMAND_ID 0x378
-#define WRITE_DATA_LOW 0x3c0
-#define WRITE_DATA_HIGH 0x3c8
-#define WRITE_BYTE_ENABLE 0x3e0
-#define READ_DATA_LOW 0x3d0
-#define READ_DATA_HIGH 0x3d8
-#define READ_ID 0x3e8
+#define X_0_ADDRESS 0x360
+#define X_0_COMMAND_ID 0x368
+#define X_1_ADDRESS 0x370
+#define X_1_COMMAND_ID 0x378
+#define WRITE_DATA_LOW 0x3c0
+#define WRITE_DATA_HIGH 0x3c8
+#define WRITE_BYTE_ENABLE 0x3e0
+#define READ_DATA_LOW 0x3d0
+#define READ_DATA_HIGH 0x3d8
+#define READ_ID 0x3e8
/****************************************/
-/* SDRAM and Device Address Space */
+/* SDRAM and Device Address Space */
/****************************************/
@@ -191,1004 +191,1004 @@
/****************************************/
-/* SDRAM Error Report */
+/* SDRAM Error Report */
/****************************************/
-#define SDRAM_ERROR_DATA_LOW 0x484
-#define SDRAM_ERROR_DATA_HIGH 0x480
-#define SDRAM_AND_DEVICE_ERROR_ADDRESS 0x490
-#define SDRAM_RECEIVED_ECC 0x488
-#define SDRAM_CALCULATED_ECC 0x48c
-#define SDRAM_ECC_CONTROL 0x494
-#define SDRAM_ECC_ERROR_COUNTER 0x498
+#define SDRAM_ERROR_DATA_LOW 0x484
+#define SDRAM_ERROR_DATA_HIGH 0x480
+#define SDRAM_AND_DEVICE_ERROR_ADDRESS 0x490
+#define SDRAM_RECEIVED_ECC 0x488
+#define SDRAM_CALCULATED_ECC 0x48c
+#define SDRAM_ECC_CONTROL 0x494
+#define SDRAM_ECC_ERROR_COUNTER 0x498
/****************************************/
/* SDunit Debug (for internal use) */
/****************************************/
-#define X0_ADDRESS 0x500
-#define X0_COMMAND_AND_ID 0x504
-#define X0_WRITE_DATA_LOW 0x508
-#define X0_WRITE_DATA_HIGH 0x50c
-#define X0_WRITE_BYTE_ENABLE 0x518
-#define X0_READ_DATA_LOW 0x510
-#define X0_READ_DATA_HIGH 0x514
-#define X0_READ_ID 0x51c
-#define X1_ADDRESS 0x520
-#define X1_COMMAND_AND_ID 0x524
-#define X1_WRITE_DATA_LOW 0x528
-#define X1_WRITE_DATA_HIGH 0x52c
-#define X1_WRITE_BYTE_ENABLE 0x538
-#define X1_READ_DATA_LOW 0x530
-#define X1_READ_DATA_HIGH 0x534
-#define X1_READ_ID 0x53c
-#define X0_SNOOP_ADDRESS 0x540
-#define X0_SNOOP_COMMAND 0x544
-#define X1_SNOOP_ADDRESS 0x548
-#define X1_SNOOP_COMMAND 0x54c
-
-
-/****************************************/
-/* Device Parameters */
-/****************************************/
-
-#define DEVICE_BANK0PARAMETERS 0x45c
-#define DEVICE_BANK1PARAMETERS 0x460
-#define DEVICE_BANK2PARAMETERS 0x464
-#define DEVICE_BANK3PARAMETERS 0x468
-#define DEVICE_BOOT_BANK_PARAMETERS 0x46c
-#define DEVICE_CONTROL 0x4c0
-#define DEVICE_CROSS_BAR_CONTROL_LOW 0x4c8
-#define DEVICE_CROSS_BAR_CONTROL_HIGH 0x4cc
-#define DEVICE_CROSS_BAR_TIMEOUT 0x4c4
-
-
-/****************************************/
-/* Device Interrupt */
-/****************************************/
-
-#define DEVICE_INTERRUPT_CAUSE 0x4d0
-#define DEVICE_INTERRUPT_MASK 0x4d4
-#define DEVICE_ERROR_ADDRESS 0x4d8
-
-/****************************************/
-/* DMA Record */
-/****************************************/
-
-#define CHANNEL0_DMA_BYTE_COUNT 0x800
-#define CHANNEL1_DMA_BYTE_COUNT 0x804
-#define CHANNEL2_DMA_BYTE_COUNT 0x808
-#define CHANNEL3_DMA_BYTE_COUNT 0x80C
-#define CHANNEL4_DMA_BYTE_COUNT 0x900
-#define CHANNEL5_DMA_BYTE_COUNT 0x904
-#define CHANNEL6_DMA_BYTE_COUNT 0x908
-#define CHANNEL7_DMA_BYTE_COUNT 0x90C
-#define CHANNEL0_DMA_SOURCE_ADDRESS 0x810
-#define CHANNEL1_DMA_SOURCE_ADDRESS 0x814
-#define CHANNEL2_DMA_SOURCE_ADDRESS 0x818
-#define CHANNEL3_DMA_SOURCE_ADDRESS 0x81C
-#define CHANNEL4_DMA_SOURCE_ADDRESS 0x910
-#define CHANNEL5_DMA_SOURCE_ADDRESS 0x914
-#define CHANNEL6_DMA_SOURCE_ADDRESS 0x918
-#define CHANNEL7_DMA_SOURCE_ADDRESS 0x91C
-#define CHANNEL0_DMA_DESTINATION_ADDRESS 0x820
-#define CHANNEL1_DMA_DESTINATION_ADDRESS 0x824
-#define CHANNEL2_DMA_DESTINATION_ADDRESS 0x828
-#define CHANNEL3_DMA_DESTINATION_ADDRESS 0x82C
-#define CHANNEL4_DMA_DESTINATION_ADDRESS 0x920
-#define CHANNEL5_DMA_DESTINATION_ADDRESS 0x924
-#define CHANNEL6_DMA_DESTINATION_ADDRESS 0x928
-#define CHANNEL7_DMA_DESTINATION_ADDRESS 0x92C
-#define CHANNEL0NEXT_RECORD_POINTER 0x830
-#define CHANNEL1NEXT_RECORD_POINTER 0x834
-#define CHANNEL2NEXT_RECORD_POINTER 0x838
-#define CHANNEL3NEXT_RECORD_POINTER 0x83C
-#define CHANNEL4NEXT_RECORD_POINTER 0x930
-#define CHANNEL5NEXT_RECORD_POINTER 0x934
-#define CHANNEL6NEXT_RECORD_POINTER 0x938
-#define CHANNEL7NEXT_RECORD_POINTER 0x93C
-#define CHANNEL0CURRENT_DESCRIPTOR_POINTER 0x870
-#define CHANNEL1CURRENT_DESCRIPTOR_POINTER 0x874
-#define CHANNEL2CURRENT_DESCRIPTOR_POINTER 0x878
-#define CHANNEL3CURRENT_DESCRIPTOR_POINTER 0x87C
-#define CHANNEL4CURRENT_DESCRIPTOR_POINTER 0x970
-#define CHANNEL5CURRENT_DESCRIPTOR_POINTER 0x974
-#define CHANNEL6CURRENT_DESCRIPTOR_POINTER 0x978
-#define CHANNEL7CURRENT_DESCRIPTOR_POINTER 0x97C
-#define CHANNEL0_DMA_SOURCE_HIGH_PCI_ADDRESS 0x890
-#define CHANNEL1_DMA_SOURCE_HIGH_PCI_ADDRESS 0x894
-#define CHANNEL2_DMA_SOURCE_HIGH_PCI_ADDRESS 0x898
-#define CHANNEL3_DMA_SOURCE_HIGH_PCI_ADDRESS 0x89c
-#define CHANNEL4_DMA_SOURCE_HIGH_PCI_ADDRESS 0x990
-#define CHANNEL5_DMA_SOURCE_HIGH_PCI_ADDRESS 0x994
-#define CHANNEL6_DMA_SOURCE_HIGH_PCI_ADDRESS 0x998
-#define CHANNEL7_DMA_SOURCE_HIGH_PCI_ADDRESS 0x99c
-#define CHANNEL0_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a0
-#define CHANNEL1_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a4
-#define CHANNEL2_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a8
-#define CHANNEL3_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8ac
-#define CHANNEL4_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a0
-#define CHANNEL5_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a4
-#define CHANNEL6_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a8
-#define CHANNEL7_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9ac
-#define CHANNEL0_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b0
-#define CHANNEL1_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b4
-#define CHANNEL2_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b8
-#define CHANNEL3_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8bc
-#define CHANNEL4_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b0
-#define CHANNEL5_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b4
-#define CHANNEL6_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b8
-#define CHANNEL7_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9bc
-
-/****************************************/
-/* DMA Channel Control */
-/****************************************/
-
-#define CHANNEL0CONTROL 0x840
-#define CHANNEL0CONTROL_HIGH 0x880
-#define CHANNEL1CONTROL 0x844
-#define CHANNEL1CONTROL_HIGH 0x884
-#define CHANNEL2CONTROL 0x848
-#define CHANNEL2CONTROL_HIGH 0x888
-#define CHANNEL3CONTROL 0x84C
-#define CHANNEL3CONTROL_HIGH 0x88C
-
-#define CHANNEL4CONTROL 0x940
-#define CHANNEL4CONTROL_HIGH 0x980
-#define CHANNEL5CONTROL 0x944
-#define CHANNEL5CONTROL_HIGH 0x984
-#define CHANNEL6CONTROL 0x948
-#define CHANNEL6CONTROL_HIGH 0x988
-#define CHANNEL7CONTROL 0x94C
-#define CHANNEL7CONTROL_HIGH 0x98C
-
-
-/****************************************/
-/* DMA Arbiter */
-/****************************************/
-
-#define ARBITER_CONTROL_0_3 0x860
-#define ARBITER_CONTROL_4_7 0x960
-
-
-/****************************************/
-/* DMA Interrupt */
-/****************************************/
-
-#define CHANELS0_3_INTERRUPT_CAUSE 0x8c0
-#define CHANELS0_3_INTERRUPT_MASK 0x8c4
-#define CHANELS0_3_ERROR_ADDRESS 0x8c8
-#define CHANELS0_3_ERROR_SELECT 0x8cc
-#define CHANELS4_7_INTERRUPT_CAUSE 0x9c0
-#define CHANELS4_7_INTERRUPT_MASK 0x9c4
-#define CHANELS4_7_ERROR_ADDRESS 0x9c8
-#define CHANELS4_7_ERROR_SELECT 0x9cc
-
-
-/****************************************/
-/* DMA Debug (for internal use) */
-/****************************************/
-
-#define DMA_X0_ADDRESS 0x8e0
-#define DMA_X0_COMMAND_AND_ID 0x8e4
-#define DMA_X0_WRITE_DATA_LOW 0x8e8
-#define DMA_X0_WRITE_DATA_HIGH 0x8ec
-#define DMA_X0_WRITE_BYTE_ENABLE 0x8f8
-#define DMA_X0_READ_DATA_LOW 0x8f0
-#define DMA_X0_READ_DATA_HIGH 0x8f4
-#define DMA_X0_READ_ID 0x8fc
-#define DMA_X1_ADDRESS 0x9e0
-#define DMA_X1_COMMAND_AND_ID 0x9e4
-#define DMA_X1_WRITE_DATA_LOW 0x9e8
-#define DMA_X1_WRITE_DATA_HIGH 0x9ec
-#define DMA_X1_WRITE_BYTE_ENABLE 0x9f8
-#define DMA_X1_READ_DATA_LOW 0x9f0
-#define DMA_X1_READ_DATA_HIGH 0x9f4
-#define DMA_X1_READ_ID 0x9fc
-
-/****************************************/
-/* Timer_Counter */
-/****************************************/
-
-#define TIMER_COUNTER0 0x850
-#define TIMER_COUNTER1 0x854
-#define TIMER_COUNTER2 0x858
-#define TIMER_COUNTER3 0x85C
-#define TIMER_COUNTER_0_3_CONTROL 0x864
-#define TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868
-#define TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c
-#define TIMER_COUNTER4 0x950
-#define TIMER_COUNTER5 0x954
-#define TIMER_COUNTER6 0x958
-#define TIMER_COUNTER7 0x95C
-#define TIMER_COUNTER_4_7_CONTROL 0x964
-#define TIMER_COUNTER_4_7_INTERRUPT_CAUSE 0x968
-#define TIMER_COUNTER_4_7_INTERRUPT_MASK 0x96c
-
-/****************************************/
-/* PCI Slave Address Decoding */
-/****************************************/
-
-#define PCI_0SCS_0_BANK_SIZE 0xc08
-#define PCI_1SCS_0_BANK_SIZE 0xc88
-#define PCI_0SCS_1_BANK_SIZE 0xd08
-#define PCI_1SCS_1_BANK_SIZE 0xd88
-#define PCI_0SCS_2_BANK_SIZE 0xc0c
-#define PCI_1SCS_2_BANK_SIZE 0xc8c
-#define PCI_0SCS_3_BANK_SIZE 0xd0c
-#define PCI_1SCS_3_BANK_SIZE 0xd8c
-#define PCI_0CS_0_BANK_SIZE 0xc10
-#define PCI_1CS_0_BANK_SIZE 0xc90
-#define PCI_0CS_1_BANK_SIZE 0xd10
-#define PCI_1CS_1_BANK_SIZE 0xd90
-#define PCI_0CS_2_BANK_SIZE 0xd18
-#define PCI_1CS_2_BANK_SIZE 0xd98
-#define PCI_0CS_3_BANK_SIZE 0xc14
-#define PCI_1CS_3_BANK_SIZE 0xc94
-#define PCI_0CS_BOOT_BANK_SIZE 0xd14
-#define PCI_1CS_BOOT_BANK_SIZE 0xd94
-#define PCI_0P2P_MEM0_BAR_SIZE 0xd1c
-#define PCI_1P2P_MEM0_BAR_SIZE 0xd9c
-#define PCI_0P2P_MEM1_BAR_SIZE 0xd20
-#define PCI_1P2P_MEM1_BAR_SIZE 0xda0
-#define PCI_0P2P_I_O_BAR_SIZE 0xd24
-#define PCI_1P2P_I_O_BAR_SIZE 0xda4
-#define PCI_0CPU_BAR_SIZE 0xd28
-#define PCI_1CPU_BAR_SIZE 0xda8
-#define PCI_0DAC_SCS_0_BANK_SIZE 0xe00
-#define PCI_1DAC_SCS_0_BANK_SIZE 0xe80
-#define PCI_0DAC_SCS_1_BANK_SIZE 0xe04
-#define PCI_1DAC_SCS_1_BANK_SIZE 0xe84
-#define PCI_0DAC_SCS_2_BANK_SIZE 0xe08
-#define PCI_1DAC_SCS_2_BANK_SIZE 0xe88
-#define PCI_0DAC_SCS_3_BANK_SIZE 0xe0c
-#define PCI_1DAC_SCS_3_BANK_SIZE 0xe8c
-#define PCI_0DAC_CS_0_BANK_SIZE 0xe10
-#define PCI_1DAC_CS_0_BANK_SIZE 0xe90
-#define PCI_0DAC_CS_1_BANK_SIZE 0xe14
-#define PCI_1DAC_CS_1_BANK_SIZE 0xe94
-#define PCI_0DAC_CS_2_BANK_SIZE 0xe18
-#define PCI_1DAC_CS_2_BANK_SIZE 0xe98
-#define PCI_0DAC_CS_3_BANK_SIZE 0xe1c
-#define PCI_1DAC_CS_3_BANK_SIZE 0xe9c
-#define PCI_0DAC_BOOTCS_BANK_SIZE 0xe20
-#define PCI_1DAC_BOOTCS_BANK_SIZE 0xea0
-#define PCI_0DAC_P2P_MEM0_BAR_SIZE 0xe24
-#define PCI_1DAC_P2P_MEM0_BAR_SIZE 0xea4
-#define PCI_0DAC_P2P_MEM1_BAR_SIZE 0xe28
-#define PCI_1DAC_P2P_MEM1_BAR_SIZE 0xea8
-#define PCI_0DAC_CPU_BAR_SIZE 0xe2c
-#define PCI_1DAC_CPU_BAR_SIZE 0xeac
-#define PCI_0EXPANSION_ROM_BAR_SIZE 0xd2c
-#define PCI_1EXPANSION_ROM_BAR_SIZE 0xdac
-#define PCI_0BASE_ADDRESS_REGISTERS_ENABLE 0xc3c
-#define PCI_1BASE_ADDRESS_REGISTERS_ENABLE 0xcbc
-#define PCI_0SCS_0_BASE_ADDRESS_REMAP 0xc48
-#define PCI_1SCS_0_BASE_ADDRESS_REMAP 0xcc8
-#define PCI_0SCS_1_BASE_ADDRESS_REMAP 0xd48
-#define PCI_1SCS_1_BASE_ADDRESS_REMAP 0xdc8
-#define PCI_0SCS_2_BASE_ADDRESS_REMAP 0xc4c
-#define PCI_1SCS_2_BASE_ADDRESS_REMAP 0xccc
-#define PCI_0SCS_3_BASE_ADDRESS_REMAP 0xd4c
-#define PCI_1SCS_3_BASE_ADDRESS_REMAP 0xdcc
-#define PCI_0CS_0_BASE_ADDRESS_REMAP 0xc50
-#define PCI_1CS_0_BASE_ADDRESS_REMAP 0xcd0
-#define PCI_0CS_1_BASE_ADDRESS_REMAP 0xd50
-#define PCI_1CS_1_BASE_ADDRESS_REMAP 0xdd0
-#define PCI_0CS_2_BASE_ADDRESS_REMAP 0xd58
-#define PCI_1CS_2_BASE_ADDRESS_REMAP 0xdd8
-#define PCI_0CS_3_BASE_ADDRESS_REMAP 0xc54
-#define PCI_1CS_3_BASE_ADDRESS_REMAP 0xcd4
-#define PCI_0CS_BOOTCS_BASE_ADDRESS_REMAP 0xd54
-#define PCI_1CS_BOOTCS_BASE_ADDRESS_REMAP 0xdd4
-#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xd5c
-#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xddc
-#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xd60
-#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xde0
-#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xd64
-#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xde4
-#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xd68
-#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xde8
-#define PCI_0P2P_I_O_BASE_ADDRESS_REMAP 0xd6c
-#define PCI_1P2P_I_O_BASE_ADDRESS_REMAP 0xdec
-#define PCI_0CPU_BASE_ADDRESS_REMAP 0xd70
-#define PCI_1CPU_BASE_ADDRESS_REMAP 0xdf0
-#define PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP 0xf00
-#define PCI_1DAC_SCS_0_BASE_ADDRESS_REMAP 0xff0
-#define PCI_0DAC_SCS_1_BASE_ADDRESS_REMAP 0xf04
-#define PCI_1DAC_SCS_1_BASE_ADDRESS_REMAP 0xf84
-#define PCI_0DAC_SCS_2_BASE_ADDRESS_REMAP 0xf08
-#define PCI_1DAC_SCS_2_BASE_ADDRESS_REMAP 0xf88
-#define PCI_0DAC_SCS_3_BASE_ADDRESS_REMAP 0xf0c
-#define PCI_1DAC_SCS_3_BASE_ADDRESS_REMAP 0xf8c
-#define PCI_0DAC_CS_0_BASE_ADDRESS_REMAP 0xf10
-#define PCI_1DAC_CS_0_BASE_ADDRESS_REMAP 0xf90
-#define PCI_0DAC_CS_1_BASE_ADDRESS_REMAP 0xf14
-#define PCI_1DAC_CS_1_BASE_ADDRESS_REMAP 0xf94
-#define PCI_0DAC_CS_2_BASE_ADDRESS_REMAP 0xf18
-#define PCI_1DAC_CS_2_BASE_ADDRESS_REMAP 0xf98
-#define PCI_0DAC_CS_3_BASE_ADDRESS_REMAP 0xf1c
-#define PCI_1DAC_CS_3_BASE_ADDRESS_REMAP 0xf9c
-#define PCI_0DAC_BOOTCS_BASE_ADDRESS_REMAP 0xf20
-#define PCI_1DAC_BOOTCS_BASE_ADDRESS_REMAP 0xfa0
-#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xf24
-#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xfa4
-#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xf28
-#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xfa8
-#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xf2c
-#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xfac
-#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xf30
-#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xfb0
-#define PCI_0DAC_CPU_BASE_ADDRESS_REMAP 0xf34
-#define PCI_1DAC_CPU_BASE_ADDRESS_REMAP 0xfb4
-#define PCI_0EXPANSION_ROM_BASE_ADDRESS_REMAP 0xf38
-#define PCI_1EXPANSION_ROM_BASE_ADDRESS_REMAP 0xfb8
-#define PCI_0ADDRESS_DECODE_CONTROL 0xd3c
-#define PCI_1ADDRESS_DECODE_CONTROL 0xdbc
-
-/****************************************/
-/* PCI Control */
-/****************************************/
-
-#define PCI_0COMMAND 0xc00
-#define PCI_1COMMAND 0xc80
-#define PCI_0MODE 0xd00
-#define PCI_1MODE 0xd80
-#define PCI_0TIMEOUT_RETRY 0xc04
-#define PCI_1TIMEOUT_RETRY 0xc84
-#define PCI_0READ_BUFFER_DISCARD_TIMER 0xd04
-#define PCI_1READ_BUFFER_DISCARD_TIMER 0xd84
-#define MSI_0TRIGGER_TIMER 0xc38
-#define MSI_1TRIGGER_TIMER 0xcb8
-#define PCI_0ARBITER_CONTROL 0x1d00
-#define PCI_1ARBITER_CONTROL 0x1d80
+#define X0_ADDRESS 0x500
+#define X0_COMMAND_AND_ID 0x504
+#define X0_WRITE_DATA_LOW 0x508
+#define X0_WRITE_DATA_HIGH 0x50c
+#define X0_WRITE_BYTE_ENABLE 0x518
+#define X0_READ_DATA_LOW 0x510
+#define X0_READ_DATA_HIGH 0x514
+#define X0_READ_ID 0x51c
+#define X1_ADDRESS 0x520
+#define X1_COMMAND_AND_ID 0x524
+#define X1_WRITE_DATA_LOW 0x528
+#define X1_WRITE_DATA_HIGH 0x52c
+#define X1_WRITE_BYTE_ENABLE 0x538
+#define X1_READ_DATA_LOW 0x530
+#define X1_READ_DATA_HIGH 0x534
+#define X1_READ_ID 0x53c
+#define X0_SNOOP_ADDRESS 0x540
+#define X0_SNOOP_COMMAND 0x544
+#define X1_SNOOP_ADDRESS 0x548
+#define X1_SNOOP_COMMAND 0x54c
+
+
+/****************************************/
+/* Device Parameters */
+/****************************************/
+
+#define DEVICE_BANK0PARAMETERS 0x45c
+#define DEVICE_BANK1PARAMETERS 0x460
+#define DEVICE_BANK2PARAMETERS 0x464
+#define DEVICE_BANK3PARAMETERS 0x468
+#define DEVICE_BOOT_BANK_PARAMETERS 0x46c
+#define DEVICE_CONTROL 0x4c0
+#define DEVICE_CROSS_BAR_CONTROL_LOW 0x4c8
+#define DEVICE_CROSS_BAR_CONTROL_HIGH 0x4cc
+#define DEVICE_CROSS_BAR_TIMEOUT 0x4c4
+
+
+/****************************************/
+/* Device Interrupt */
+/****************************************/
+
+#define DEVICE_INTERRUPT_CAUSE 0x4d0
+#define DEVICE_INTERRUPT_MASK 0x4d4
+#define DEVICE_ERROR_ADDRESS 0x4d8
+
+/****************************************/
+/* DMA Record */
+/****************************************/
+
+#define CHANNEL0_DMA_BYTE_COUNT 0x800
+#define CHANNEL1_DMA_BYTE_COUNT 0x804
+#define CHANNEL2_DMA_BYTE_COUNT 0x808
+#define CHANNEL3_DMA_BYTE_COUNT 0x80C
+#define CHANNEL4_DMA_BYTE_COUNT 0x900
+#define CHANNEL5_DMA_BYTE_COUNT 0x904
+#define CHANNEL6_DMA_BYTE_COUNT 0x908
+#define CHANNEL7_DMA_BYTE_COUNT 0x90C
+#define CHANNEL0_DMA_SOURCE_ADDRESS 0x810
+#define CHANNEL1_DMA_SOURCE_ADDRESS 0x814
+#define CHANNEL2_DMA_SOURCE_ADDRESS 0x818
+#define CHANNEL3_DMA_SOURCE_ADDRESS 0x81C
+#define CHANNEL4_DMA_SOURCE_ADDRESS 0x910
+#define CHANNEL5_DMA_SOURCE_ADDRESS 0x914
+#define CHANNEL6_DMA_SOURCE_ADDRESS 0x918
+#define CHANNEL7_DMA_SOURCE_ADDRESS 0x91C
+#define CHANNEL0_DMA_DESTINATION_ADDRESS 0x820
+#define CHANNEL1_DMA_DESTINATION_ADDRESS 0x824
+#define CHANNEL2_DMA_DESTINATION_ADDRESS 0x828
+#define CHANNEL3_DMA_DESTINATION_ADDRESS 0x82C
+#define CHANNEL4_DMA_DESTINATION_ADDRESS 0x920
+#define CHANNEL5_DMA_DESTINATION_ADDRESS 0x924
+#define CHANNEL6_DMA_DESTINATION_ADDRESS 0x928
+#define CHANNEL7_DMA_DESTINATION_ADDRESS 0x92C
+#define CHANNEL0NEXT_RECORD_POINTER 0x830
+#define CHANNEL1NEXT_RECORD_POINTER 0x834
+#define CHANNEL2NEXT_RECORD_POINTER 0x838
+#define CHANNEL3NEXT_RECORD_POINTER 0x83C
+#define CHANNEL4NEXT_RECORD_POINTER 0x930
+#define CHANNEL5NEXT_RECORD_POINTER 0x934
+#define CHANNEL6NEXT_RECORD_POINTER 0x938
+#define CHANNEL7NEXT_RECORD_POINTER 0x93C
+#define CHANNEL0CURRENT_DESCRIPTOR_POINTER 0x870
+#define CHANNEL1CURRENT_DESCRIPTOR_POINTER 0x874
+#define CHANNEL2CURRENT_DESCRIPTOR_POINTER 0x878
+#define CHANNEL3CURRENT_DESCRIPTOR_POINTER 0x87C
+#define CHANNEL4CURRENT_DESCRIPTOR_POINTER 0x970
+#define CHANNEL5CURRENT_DESCRIPTOR_POINTER 0x974
+#define CHANNEL6CURRENT_DESCRIPTOR_POINTER 0x978
+#define CHANNEL7CURRENT_DESCRIPTOR_POINTER 0x97C
+#define CHANNEL0_DMA_SOURCE_HIGH_PCI_ADDRESS 0x890
+#define CHANNEL1_DMA_SOURCE_HIGH_PCI_ADDRESS 0x894
+#define CHANNEL2_DMA_SOURCE_HIGH_PCI_ADDRESS 0x898
+#define CHANNEL3_DMA_SOURCE_HIGH_PCI_ADDRESS 0x89c
+#define CHANNEL4_DMA_SOURCE_HIGH_PCI_ADDRESS 0x990
+#define CHANNEL5_DMA_SOURCE_HIGH_PCI_ADDRESS 0x994
+#define CHANNEL6_DMA_SOURCE_HIGH_PCI_ADDRESS 0x998
+#define CHANNEL7_DMA_SOURCE_HIGH_PCI_ADDRESS 0x99c
+#define CHANNEL0_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a0
+#define CHANNEL1_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a4
+#define CHANNEL2_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8a8
+#define CHANNEL3_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x8ac
+#define CHANNEL4_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a0
+#define CHANNEL5_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a4
+#define CHANNEL6_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9a8
+#define CHANNEL7_DMA_DESTINATION_HIGH_PCI_ADDRESS 0x9ac
+#define CHANNEL0_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b0
+#define CHANNEL1_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b4
+#define CHANNEL2_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8b8
+#define CHANNEL3_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x8bc
+#define CHANNEL4_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b0
+#define CHANNEL5_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b4
+#define CHANNEL6_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9b8
+#define CHANNEL7_DMA_NEXT_RECORD_POINTER_HIGH_PCI_ADDRESS 0x9bc
+
+/****************************************/
+/* DMA Channel Control */
+/****************************************/
+
+#define CHANNEL0CONTROL 0x840
+#define CHANNEL0CONTROL_HIGH 0x880
+#define CHANNEL1CONTROL 0x844
+#define CHANNEL1CONTROL_HIGH 0x884
+#define CHANNEL2CONTROL 0x848
+#define CHANNEL2CONTROL_HIGH 0x888
+#define CHANNEL3CONTROL 0x84C
+#define CHANNEL3CONTROL_HIGH 0x88C
+
+#define CHANNEL4CONTROL 0x940
+#define CHANNEL4CONTROL_HIGH 0x980
+#define CHANNEL5CONTROL 0x944
+#define CHANNEL5CONTROL_HIGH 0x984
+#define CHANNEL6CONTROL 0x948
+#define CHANNEL6CONTROL_HIGH 0x988
+#define CHANNEL7CONTROL 0x94C
+#define CHANNEL7CONTROL_HIGH 0x98C
+
+
+/****************************************/
+/* DMA Arbiter */
+/****************************************/
+
+#define ARBITER_CONTROL_0_3 0x860
+#define ARBITER_CONTROL_4_7 0x960
+
+
+/****************************************/
+/* DMA Interrupt */
+/****************************************/
+
+#define CHANELS0_3_INTERRUPT_CAUSE 0x8c0
+#define CHANELS0_3_INTERRUPT_MASK 0x8c4
+#define CHANELS0_3_ERROR_ADDRESS 0x8c8
+#define CHANELS0_3_ERROR_SELECT 0x8cc
+#define CHANELS4_7_INTERRUPT_CAUSE 0x9c0
+#define CHANELS4_7_INTERRUPT_MASK 0x9c4
+#define CHANELS4_7_ERROR_ADDRESS 0x9c8
+#define CHANELS4_7_ERROR_SELECT 0x9cc
+
+
+/****************************************/
+/* DMA Debug (for internal use) */
+/****************************************/
+
+#define DMA_X0_ADDRESS 0x8e0
+#define DMA_X0_COMMAND_AND_ID 0x8e4
+#define DMA_X0_WRITE_DATA_LOW 0x8e8
+#define DMA_X0_WRITE_DATA_HIGH 0x8ec
+#define DMA_X0_WRITE_BYTE_ENABLE 0x8f8
+#define DMA_X0_READ_DATA_LOW 0x8f0
+#define DMA_X0_READ_DATA_HIGH 0x8f4
+#define DMA_X0_READ_ID 0x8fc
+#define DMA_X1_ADDRESS 0x9e0
+#define DMA_X1_COMMAND_AND_ID 0x9e4
+#define DMA_X1_WRITE_DATA_LOW 0x9e8
+#define DMA_X1_WRITE_DATA_HIGH 0x9ec
+#define DMA_X1_WRITE_BYTE_ENABLE 0x9f8
+#define DMA_X1_READ_DATA_LOW 0x9f0
+#define DMA_X1_READ_DATA_HIGH 0x9f4
+#define DMA_X1_READ_ID 0x9fc
+
+/****************************************/
+/* Timer_Counter */
+/****************************************/
+
+#define TIMER_COUNTER0 0x850
+#define TIMER_COUNTER1 0x854
+#define TIMER_COUNTER2 0x858
+#define TIMER_COUNTER3 0x85C
+#define TIMER_COUNTER_0_3_CONTROL 0x864
+#define TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868
+#define TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c
+#define TIMER_COUNTER4 0x950
+#define TIMER_COUNTER5 0x954
+#define TIMER_COUNTER6 0x958
+#define TIMER_COUNTER7 0x95C
+#define TIMER_COUNTER_4_7_CONTROL 0x964
+#define TIMER_COUNTER_4_7_INTERRUPT_CAUSE 0x968
+#define TIMER_COUNTER_4_7_INTERRUPT_MASK 0x96c
+
+/****************************************/
+/* PCI Slave Address Decoding */
+/****************************************/
+
+#define PCI_0SCS_0_BANK_SIZE 0xc08
+#define PCI_1SCS_0_BANK_SIZE 0xc88
+#define PCI_0SCS_1_BANK_SIZE 0xd08
+#define PCI_1SCS_1_BANK_SIZE 0xd88
+#define PCI_0SCS_2_BANK_SIZE 0xc0c
+#define PCI_1SCS_2_BANK_SIZE 0xc8c
+#define PCI_0SCS_3_BANK_SIZE 0xd0c
+#define PCI_1SCS_3_BANK_SIZE 0xd8c
+#define PCI_0CS_0_BANK_SIZE 0xc10
+#define PCI_1CS_0_BANK_SIZE 0xc90
+#define PCI_0CS_1_BANK_SIZE 0xd10
+#define PCI_1CS_1_BANK_SIZE 0xd90
+#define PCI_0CS_2_BANK_SIZE 0xd18
+#define PCI_1CS_2_BANK_SIZE 0xd98
+#define PCI_0CS_3_BANK_SIZE 0xc14
+#define PCI_1CS_3_BANK_SIZE 0xc94
+#define PCI_0CS_BOOT_BANK_SIZE 0xd14
+#define PCI_1CS_BOOT_BANK_SIZE 0xd94
+#define PCI_0P2P_MEM0_BAR_SIZE 0xd1c
+#define PCI_1P2P_MEM0_BAR_SIZE 0xd9c
+#define PCI_0P2P_MEM1_BAR_SIZE 0xd20
+#define PCI_1P2P_MEM1_BAR_SIZE 0xda0
+#define PCI_0P2P_I_O_BAR_SIZE 0xd24
+#define PCI_1P2P_I_O_BAR_SIZE 0xda4
+#define PCI_0CPU_BAR_SIZE 0xd28
+#define PCI_1CPU_BAR_SIZE 0xda8
+#define PCI_0DAC_SCS_0_BANK_SIZE 0xe00
+#define PCI_1DAC_SCS_0_BANK_SIZE 0xe80
+#define PCI_0DAC_SCS_1_BANK_SIZE 0xe04
+#define PCI_1DAC_SCS_1_BANK_SIZE 0xe84
+#define PCI_0DAC_SCS_2_BANK_SIZE 0xe08
+#define PCI_1DAC_SCS_2_BANK_SIZE 0xe88
+#define PCI_0DAC_SCS_3_BANK_SIZE 0xe0c
+#define PCI_1DAC_SCS_3_BANK_SIZE 0xe8c
+#define PCI_0DAC_CS_0_BANK_SIZE 0xe10
+#define PCI_1DAC_CS_0_BANK_SIZE 0xe90
+#define PCI_0DAC_CS_1_BANK_SIZE 0xe14
+#define PCI_1DAC_CS_1_BANK_SIZE 0xe94
+#define PCI_0DAC_CS_2_BANK_SIZE 0xe18
+#define PCI_1DAC_CS_2_BANK_SIZE 0xe98
+#define PCI_0DAC_CS_3_BANK_SIZE 0xe1c
+#define PCI_1DAC_CS_3_BANK_SIZE 0xe9c
+#define PCI_0DAC_BOOTCS_BANK_SIZE 0xe20
+#define PCI_1DAC_BOOTCS_BANK_SIZE 0xea0
+#define PCI_0DAC_P2P_MEM0_BAR_SIZE 0xe24
+#define PCI_1DAC_P2P_MEM0_BAR_SIZE 0xea4
+#define PCI_0DAC_P2P_MEM1_BAR_SIZE 0xe28
+#define PCI_1DAC_P2P_MEM1_BAR_SIZE 0xea8
+#define PCI_0DAC_CPU_BAR_SIZE 0xe2c
+#define PCI_1DAC_CPU_BAR_SIZE 0xeac
+#define PCI_0EXPANSION_ROM_BAR_SIZE 0xd2c
+#define PCI_1EXPANSION_ROM_BAR_SIZE 0xdac
+#define PCI_0BASE_ADDRESS_REGISTERS_ENABLE 0xc3c
+#define PCI_1BASE_ADDRESS_REGISTERS_ENABLE 0xcbc
+#define PCI_0SCS_0_BASE_ADDRESS_REMAP 0xc48
+#define PCI_1SCS_0_BASE_ADDRESS_REMAP 0xcc8
+#define PCI_0SCS_1_BASE_ADDRESS_REMAP 0xd48
+#define PCI_1SCS_1_BASE_ADDRESS_REMAP 0xdc8
+#define PCI_0SCS_2_BASE_ADDRESS_REMAP 0xc4c
+#define PCI_1SCS_2_BASE_ADDRESS_REMAP 0xccc
+#define PCI_0SCS_3_BASE_ADDRESS_REMAP 0xd4c
+#define PCI_1SCS_3_BASE_ADDRESS_REMAP 0xdcc
+#define PCI_0CS_0_BASE_ADDRESS_REMAP 0xc50
+#define PCI_1CS_0_BASE_ADDRESS_REMAP 0xcd0
+#define PCI_0CS_1_BASE_ADDRESS_REMAP 0xd50
+#define PCI_1CS_1_BASE_ADDRESS_REMAP 0xdd0
+#define PCI_0CS_2_BASE_ADDRESS_REMAP 0xd58
+#define PCI_1CS_2_BASE_ADDRESS_REMAP 0xdd8
+#define PCI_0CS_3_BASE_ADDRESS_REMAP 0xc54
+#define PCI_1CS_3_BASE_ADDRESS_REMAP 0xcd4
+#define PCI_0CS_BOOTCS_BASE_ADDRESS_REMAP 0xd54
+#define PCI_1CS_BOOTCS_BASE_ADDRESS_REMAP 0xdd4
+#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xd5c
+#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xddc
+#define PCI_0P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xd60
+#define PCI_1P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xde0
+#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xd64
+#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xde4
+#define PCI_0P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xd68
+#define PCI_1P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xde8
+#define PCI_0P2P_I_O_BASE_ADDRESS_REMAP 0xd6c
+#define PCI_1P2P_I_O_BASE_ADDRESS_REMAP 0xdec
+#define PCI_0CPU_BASE_ADDRESS_REMAP 0xd70
+#define PCI_1CPU_BASE_ADDRESS_REMAP 0xdf0
+#define PCI_0DAC_SCS_0_BASE_ADDRESS_REMAP 0xf00
+#define PCI_1DAC_SCS_0_BASE_ADDRESS_REMAP 0xff0
+#define PCI_0DAC_SCS_1_BASE_ADDRESS_REMAP 0xf04
+#define PCI_1DAC_SCS_1_BASE_ADDRESS_REMAP 0xf84
+#define PCI_0DAC_SCS_2_BASE_ADDRESS_REMAP 0xf08
+#define PCI_1DAC_SCS_2_BASE_ADDRESS_REMAP 0xf88
+#define PCI_0DAC_SCS_3_BASE_ADDRESS_REMAP 0xf0c
+#define PCI_1DAC_SCS_3_BASE_ADDRESS_REMAP 0xf8c
+#define PCI_0DAC_CS_0_BASE_ADDRESS_REMAP 0xf10
+#define PCI_1DAC_CS_0_BASE_ADDRESS_REMAP 0xf90
+#define PCI_0DAC_CS_1_BASE_ADDRESS_REMAP 0xf14
+#define PCI_1DAC_CS_1_BASE_ADDRESS_REMAP 0xf94
+#define PCI_0DAC_CS_2_BASE_ADDRESS_REMAP 0xf18
+#define PCI_1DAC_CS_2_BASE_ADDRESS_REMAP 0xf98
+#define PCI_0DAC_CS_3_BASE_ADDRESS_REMAP 0xf1c
+#define PCI_1DAC_CS_3_BASE_ADDRESS_REMAP 0xf9c
+#define PCI_0DAC_BOOTCS_BASE_ADDRESS_REMAP 0xf20
+#define PCI_1DAC_BOOTCS_BASE_ADDRESS_REMAP 0xfa0
+#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xf24
+#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_LOW 0xfa4
+#define PCI_0DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xf28
+#define PCI_1DAC_P2P_MEM0_BASE_ADDRESS_REMAP_HIGH 0xfa8
+#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xf2c
+#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_LOW 0xfac
+#define PCI_0DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xf30
+#define PCI_1DAC_P2P_MEM1_BASE_ADDRESS_REMAP_HIGH 0xfb0
+#define PCI_0DAC_CPU_BASE_ADDRESS_REMAP 0xf34
+#define PCI_1DAC_CPU_BASE_ADDRESS_REMAP 0xfb4
+#define PCI_0EXPANSION_ROM_BASE_ADDRESS_REMAP 0xf38
+#define PCI_1EXPANSION_ROM_BASE_ADDRESS_REMAP 0xfb8
+#define PCI_0ADDRESS_DECODE_CONTROL 0xd3c
+#define PCI_1ADDRESS_DECODE_CONTROL 0xdbc
+
+/****************************************/
+/* PCI Control */
+/****************************************/
+
+#define PCI_0COMMAND 0xc00
+#define PCI_1COMMAND 0xc80
+#define PCI_0MODE 0xd00
+#define PCI_1MODE 0xd80
+#define PCI_0TIMEOUT_RETRY 0xc04
+#define PCI_1TIMEOUT_RETRY 0xc84
+#define PCI_0READ_BUFFER_DISCARD_TIMER 0xd04
+#define PCI_1READ_BUFFER_DISCARD_TIMER 0xd84
+#define MSI_0TRIGGER_TIMER 0xc38
+#define MSI_1TRIGGER_TIMER 0xcb8
+#define PCI_0ARBITER_CONTROL 0x1d00
+#define PCI_1ARBITER_CONTROL 0x1d80
/* changing untill here */
-#define PCI_0CROSS_BAR_CONTROL_LOW 0x1d08
-#define PCI_0CROSS_BAR_CONTROL_HIGH 0x1d0c
-#define PCI_0CROSS_BAR_TIMEOUT 0x1d04
-#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_LOW 0x1d18
-#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_HIGH 0x1d1c
-#define PCI_0SYNC_BARRIER_VIRTUAL_REGISTER 0x1d10
-#define PCI_0P2P_CONFIGURATION 0x1d14
-#define PCI_0ACCESS_CONTROL_BASE_0_LOW 0x1e00
-#define PCI_0ACCESS_CONTROL_BASE_0_HIGH 0x1e04
-#define PCI_0ACCESS_CONTROL_TOP_0 0x1e08
-#define PCI_0ACCESS_CONTROL_BASE_1_LOW 0x1e10
-#define PCI_0ACCESS_CONTROL_BASE_1_HIGH 0x1e14
-#define PCI_0ACCESS_CONTROL_TOP_1 0x1e18
-#define PCI_0ACCESS_CONTROL_BASE_2_LOW 0x1e20
-#define PCI_0ACCESS_CONTROL_BASE_2_HIGH 0x1e24
-#define PCI_0ACCESS_CONTROL_TOP_2 0x1e28
-#define PCI_0ACCESS_CONTROL_BASE_3_LOW 0x1e30
-#define PCI_0ACCESS_CONTROL_BASE_3_HIGH 0x1e34
-#define PCI_0ACCESS_CONTROL_TOP_3 0x1e38
-#define PCI_0ACCESS_CONTROL_BASE_4_LOW 0x1e40
-#define PCI_0ACCESS_CONTROL_BASE_4_HIGH 0x1e44
-#define PCI_0ACCESS_CONTROL_TOP_4 0x1e48
-#define PCI_0ACCESS_CONTROL_BASE_5_LOW 0x1e50
-#define PCI_0ACCESS_CONTROL_BASE_5_HIGH 0x1e54
-#define PCI_0ACCESS_CONTROL_TOP_5 0x1e58
-#define PCI_0ACCESS_CONTROL_BASE_6_LOW 0x1e60
-#define PCI_0ACCESS_CONTROL_BASE_6_HIGH 0x1e64
-#define PCI_0ACCESS_CONTROL_TOP_6 0x1e68
-#define PCI_0ACCESS_CONTROL_BASE_7_LOW 0x1e70
-#define PCI_0ACCESS_CONTROL_BASE_7_HIGH 0x1e74
-#define PCI_0ACCESS_CONTROL_TOP_7 0x1e78
-#define PCI_1CROSS_BAR_CONTROL_LOW 0x1d88
-#define PCI_1CROSS_BAR_CONTROL_HIGH 0x1d8c
-#define PCI_1CROSS_BAR_TIMEOUT 0x1d84
-#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_LOW 0x1d98
-#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_HIGH 0x1d9c
-#define PCI_1SYNC_BARRIER_VIRTUAL_REGISTER 0x1d90
-#define PCI_1P2P_CONFIGURATION 0x1d94
-#define PCI_1ACCESS_CONTROL_BASE_0_LOW 0x1e80
-#define PCI_1ACCESS_CONTROL_BASE_0_HIGH 0x1e84
-#define PCI_1ACCESS_CONTROL_TOP_0 0x1e88
-#define PCI_1ACCESS_CONTROL_BASE_1_LOW 0x1e90
-#define PCI_1ACCESS_CONTROL_BASE_1_HIGH 0x1e94
-#define PCI_1ACCESS_CONTROL_TOP_1 0x1e98
-#define PCI_1ACCESS_CONTROL_BASE_2_LOW 0x1ea0
-#define PCI_1ACCESS_CONTROL_BASE_2_HIGH 0x1ea4
-#define PCI_1ACCESS_CONTROL_TOP_2 0x1ea8
-#define PCI_1ACCESS_CONTROL_BASE_3_LOW 0x1eb0
-#define PCI_1ACCESS_CONTROL_BASE_3_HIGH 0x1eb4
-#define PCI_1ACCESS_CONTROL_TOP_3 0x1eb8
-#define PCI_1ACCESS_CONTROL_BASE_4_LOW 0x1ec0
-#define PCI_1ACCESS_CONTROL_BASE_4_HIGH 0x1ec4
-#define PCI_1ACCESS_CONTROL_TOP_4 0x1ec8
-#define PCI_1ACCESS_CONTROL_BASE_5_LOW 0x1ed0
-#define PCI_1ACCESS_CONTROL_BASE_5_HIGH 0x1ed4
-#define PCI_1ACCESS_CONTROL_TOP_5 0x1ed8
-#define PCI_1ACCESS_CONTROL_BASE_6_LOW 0x1ee0
-#define PCI_1ACCESS_CONTROL_BASE_6_HIGH 0x1ee4
-#define PCI_1ACCESS_CONTROL_TOP_6 0x1ee8
-#define PCI_1ACCESS_CONTROL_BASE_7_LOW 0x1ef0
-#define PCI_1ACCESS_CONTROL_BASE_7_HIGH 0x1ef4
-#define PCI_1ACCESS_CONTROL_TOP_7 0x1ef8
-
-/****************************************/
-/* PCI Snoop Control */
-/****************************************/
-
-#define PCI_0SNOOP_CONTROL_BASE_0_LOW 0x1f00
-#define PCI_0SNOOP_CONTROL_BASE_0_HIGH 0x1f04
-#define PCI_0SNOOP_CONTROL_TOP_0 0x1f08
-#define PCI_0SNOOP_CONTROL_BASE_1_0_LOW 0x1f10
-#define PCI_0SNOOP_CONTROL_BASE_1_0_HIGH 0x1f14
-#define PCI_0SNOOP_CONTROL_TOP_1 0x1f18
-#define PCI_0SNOOP_CONTROL_BASE_2_0_LOW 0x1f20
-#define PCI_0SNOOP_CONTROL_BASE_2_0_HIGH 0x1f24
-#define PCI_0SNOOP_CONTROL_TOP_2 0x1f28
-#define PCI_0SNOOP_CONTROL_BASE_3_0_LOW 0x1f30
-#define PCI_0SNOOP_CONTROL_BASE_3_0_HIGH 0x1f34
-#define PCI_0SNOOP_CONTROL_TOP_3 0x1f38
-#define PCI_1SNOOP_CONTROL_BASE_0_LOW 0x1f80
-#define PCI_1SNOOP_CONTROL_BASE_0_HIGH 0x1f84
-#define PCI_1SNOOP_CONTROL_TOP_0 0x1f88
-#define PCI_1SNOOP_CONTROL_BASE_1_0_LOW 0x1f90
-#define PCI_1SNOOP_CONTROL_BASE_1_0_HIGH 0x1f94
-#define PCI_1SNOOP_CONTROL_TOP_1 0x1f98
-#define PCI_1SNOOP_CONTROL_BASE_2_0_LOW 0x1fa0
-#define PCI_1SNOOP_CONTROL_BASE_2_0_HIGH 0x1fa4
-#define PCI_1SNOOP_CONTROL_TOP_2 0x1fa8
-#define PCI_1SNOOP_CONTROL_BASE_3_0_LOW 0x1fb0
-#define PCI_1SNOOP_CONTROL_BASE_3_0_HIGH 0x1fb4
-#define PCI_1SNOOP_CONTROL_TOP_3 0x1fb8
-
-/****************************************/
-/* PCI Configuration Address */
-/****************************************/
-
-#define PCI_0CONFIGURATION_ADDRESS 0xcf8
-#define PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER 0xcfc
-#define PCI_1CONFIGURATION_ADDRESS 0xc78
-#define PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER 0xc7c
-#define PCI_0INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER 0xc34
-#define PCI_1INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER 0xcb4
-
-/****************************************/
-/* PCI Error Report */
+#define PCI_0CROSS_BAR_CONTROL_LOW 0x1d08
+#define PCI_0CROSS_BAR_CONTROL_HIGH 0x1d0c
+#define PCI_0CROSS_BAR_TIMEOUT 0x1d04
+#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_LOW 0x1d18
+#define PCI_0READ_RESPONSE_CROSS_BAR_CONTROL_HIGH 0x1d1c
+#define PCI_0SYNC_BARRIER_VIRTUAL_REGISTER 0x1d10
+#define PCI_0P2P_CONFIGURATION 0x1d14
+#define PCI_0ACCESS_CONTROL_BASE_0_LOW 0x1e00
+#define PCI_0ACCESS_CONTROL_BASE_0_HIGH 0x1e04
+#define PCI_0ACCESS_CONTROL_TOP_0 0x1e08
+#define PCI_0ACCESS_CONTROL_BASE_1_LOW 0x1e10
+#define PCI_0ACCESS_CONTROL_BASE_1_HIGH 0x1e14
+#define PCI_0ACCESS_CONTROL_TOP_1 0x1e18
+#define PCI_0ACCESS_CONTROL_BASE_2_LOW 0x1e20
+#define PCI_0ACCESS_CONTROL_BASE_2_HIGH 0x1e24
+#define PCI_0ACCESS_CONTROL_TOP_2 0x1e28
+#define PCI_0ACCESS_CONTROL_BASE_3_LOW 0x1e30
+#define PCI_0ACCESS_CONTROL_BASE_3_HIGH 0x1e34
+#define PCI_0ACCESS_CONTROL_TOP_3 0x1e38
+#define PCI_0ACCESS_CONTROL_BASE_4_LOW 0x1e40
+#define PCI_0ACCESS_CONTROL_BASE_4_HIGH 0x1e44
+#define PCI_0ACCESS_CONTROL_TOP_4 0x1e48
+#define PCI_0ACCESS_CONTROL_BASE_5_LOW 0x1e50
+#define PCI_0ACCESS_CONTROL_BASE_5_HIGH 0x1e54
+#define PCI_0ACCESS_CONTROL_TOP_5 0x1e58
+#define PCI_0ACCESS_CONTROL_BASE_6_LOW 0x1e60
+#define PCI_0ACCESS_CONTROL_BASE_6_HIGH 0x1e64
+#define PCI_0ACCESS_CONTROL_TOP_6 0x1e68
+#define PCI_0ACCESS_CONTROL_BASE_7_LOW 0x1e70
+#define PCI_0ACCESS_CONTROL_BASE_7_HIGH 0x1e74
+#define PCI_0ACCESS_CONTROL_TOP_7 0x1e78
+#define PCI_1CROSS_BAR_CONTROL_LOW 0x1d88
+#define PCI_1CROSS_BAR_CONTROL_HIGH 0x1d8c
+#define PCI_1CROSS_BAR_TIMEOUT 0x1d84
+#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_LOW 0x1d98
+#define PCI_1READ_RESPONSE_CROSS_BAR_CONTROL_HIGH 0x1d9c
+#define PCI_1SYNC_BARRIER_VIRTUAL_REGISTER 0x1d90
+#define PCI_1P2P_CONFIGURATION 0x1d94
+#define PCI_1ACCESS_CONTROL_BASE_0_LOW 0x1e80
+#define PCI_1ACCESS_CONTROL_BASE_0_HIGH 0x1e84
+#define PCI_1ACCESS_CONTROL_TOP_0 0x1e88
+#define PCI_1ACCESS_CONTROL_BASE_1_LOW 0x1e90
+#define PCI_1ACCESS_CONTROL_BASE_1_HIGH 0x1e94
+#define PCI_1ACCESS_CONTROL_TOP_1 0x1e98
+#define PCI_1ACCESS_CONTROL_BASE_2_LOW 0x1ea0
+#define PCI_1ACCESS_CONTROL_BASE_2_HIGH 0x1ea4
+#define PCI_1ACCESS_CONTROL_TOP_2 0x1ea8
+#define PCI_1ACCESS_CONTROL_BASE_3_LOW 0x1eb0
+#define PCI_1ACCESS_CONTROL_BASE_3_HIGH 0x1eb4
+#define PCI_1ACCESS_CONTROL_TOP_3 0x1eb8
+#define PCI_1ACCESS_CONTROL_BASE_4_LOW 0x1ec0
+#define PCI_1ACCESS_CONTROL_BASE_4_HIGH 0x1ec4
+#define PCI_1ACCESS_CONTROL_TOP_4 0x1ec8
+#define PCI_1ACCESS_CONTROL_BASE_5_LOW 0x1ed0
+#define PCI_1ACCESS_CONTROL_BASE_5_HIGH 0x1ed4
+#define PCI_1ACCESS_CONTROL_TOP_5 0x1ed8
+#define PCI_1ACCESS_CONTROL_BASE_6_LOW 0x1ee0
+#define PCI_1ACCESS_CONTROL_BASE_6_HIGH 0x1ee4
+#define PCI_1ACCESS_CONTROL_TOP_6 0x1ee8
+#define PCI_1ACCESS_CONTROL_BASE_7_LOW 0x1ef0
+#define PCI_1ACCESS_CONTROL_BASE_7_HIGH 0x1ef4
+#define PCI_1ACCESS_CONTROL_TOP_7 0x1ef8
+
+/****************************************/
+/* PCI Snoop Control */
+/****************************************/
+
+#define PCI_0SNOOP_CONTROL_BASE_0_LOW 0x1f00
+#define PCI_0SNOOP_CONTROL_BASE_0_HIGH 0x1f04
+#define PCI_0SNOOP_CONTROL_TOP_0 0x1f08
+#define PCI_0SNOOP_CONTROL_BASE_1_0_LOW 0x1f10
+#define PCI_0SNOOP_CONTROL_BASE_1_0_HIGH 0x1f14
+#define PCI_0SNOOP_CONTROL_TOP_1 0x1f18
+#define PCI_0SNOOP_CONTROL_BASE_2_0_LOW 0x1f20
+#define PCI_0SNOOP_CONTROL_BASE_2_0_HIGH 0x1f24
+#define PCI_0SNOOP_CONTROL_TOP_2 0x1f28
+#define PCI_0SNOOP_CONTROL_BASE_3_0_LOW 0x1f30
+#define PCI_0SNOOP_CONTROL_BASE_3_0_HIGH 0x1f34
+#define PCI_0SNOOP_CONTROL_TOP_3 0x1f38
+#define PCI_1SNOOP_CONTROL_BASE_0_LOW 0x1f80
+#define PCI_1SNOOP_CONTROL_BASE_0_HIGH 0x1f84
+#define PCI_1SNOOP_CONTROL_TOP_0 0x1f88
+#define PCI_1SNOOP_CONTROL_BASE_1_0_LOW 0x1f90
+#define PCI_1SNOOP_CONTROL_BASE_1_0_HIGH 0x1f94
+#define PCI_1SNOOP_CONTROL_TOP_1 0x1f98
+#define PCI_1SNOOP_CONTROL_BASE_2_0_LOW 0x1fa0
+#define PCI_1SNOOP_CONTROL_BASE_2_0_HIGH 0x1fa4
+#define PCI_1SNOOP_CONTROL_TOP_2 0x1fa8
+#define PCI_1SNOOP_CONTROL_BASE_3_0_LOW 0x1fb0
+#define PCI_1SNOOP_CONTROL_BASE_3_0_HIGH 0x1fb4
+#define PCI_1SNOOP_CONTROL_TOP_3 0x1fb8
+
+/****************************************/
+/* PCI Configuration Address */
+/****************************************/
+
+#define PCI_0CONFIGURATION_ADDRESS 0xcf8
+#define PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER 0xcfc
+#define PCI_1CONFIGURATION_ADDRESS 0xc78
+#define PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER 0xc7c
+#define PCI_0INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER 0xc34
+#define PCI_1INTERRUPT_ACKNOWLEDGE_VIRTUAL_REGISTER 0xcb4
+
+/****************************************/
+/* PCI Error Report */
/****************************************/
#define PCI_0SERR_MASK 0xc28
-#define PCI_0ERROR_ADDRESS_LOW 0x1d40
-#define PCI_0ERROR_ADDRESS_HIGH 0x1d44
-#define PCI_0ERROR_DATA_LOW 0x1d48
-#define PCI_0ERROR_DATA_HIGH 0x1d4c
-#define PCI_0ERROR_COMMAND 0x1d50
-#define PCI_0ERROR_CAUSE 0x1d58
-#define PCI_0ERROR_MASK 0x1d5c
+#define PCI_0ERROR_ADDRESS_LOW 0x1d40
+#define PCI_0ERROR_ADDRESS_HIGH 0x1d44
+#define PCI_0ERROR_DATA_LOW 0x1d48
+#define PCI_0ERROR_DATA_HIGH 0x1d4c
+#define PCI_0ERROR_COMMAND 0x1d50
+#define PCI_0ERROR_CAUSE 0x1d58
+#define PCI_0ERROR_MASK 0x1d5c
#define PCI_1SERR_MASK 0xca8
-#define PCI_1ERROR_ADDRESS_LOW 0x1dc0
-#define PCI_1ERROR_ADDRESS_HIGH 0x1dc4
-#define PCI_1ERROR_DATA_LOW 0x1dc8
-#define PCI_1ERROR_DATA_HIGH 0x1dcc
-#define PCI_1ERROR_COMMAND 0x1dd0
-#define PCI_1ERROR_CAUSE 0x1dd8
-#define PCI_1ERROR_MASK 0x1ddc
+#define PCI_1ERROR_ADDRESS_LOW 0x1dc0
+#define PCI_1ERROR_ADDRESS_HIGH 0x1dc4
+#define PCI_1ERROR_DATA_LOW 0x1dc8
+#define PCI_1ERROR_DATA_HIGH 0x1dcc
+#define PCI_1ERROR_COMMAND 0x1dd0
+#define PCI_1ERROR_CAUSE 0x1dd8
+#define PCI_1ERROR_MASK 0x1ddc
/****************************************/
-/* Lslave Debug (for internal use) */
+/* Lslave Debug (for internal use) */
/****************************************/
-#define L_SLAVE_X0_ADDRESS 0x1d20
-#define L_SLAVE_X0_COMMAND_AND_ID 0x1d24
-#define L_SLAVE_X1_ADDRESS 0x1d28
-#define L_SLAVE_X1_COMMAND_AND_ID 0x1d2c
-#define L_SLAVE_WRITE_DATA_LOW 0x1d30
-#define L_SLAVE_WRITE_DATA_HIGH 0x1d34
-#define L_SLAVE_WRITE_BYTE_ENABLE 0x1d60
-#define L_SLAVE_READ_DATA_LOW 0x1d38
-#define L_SLAVE_READ_DATA_HIGH 0x1d3c
-#define L_SLAVE_READ_ID 0x1d64
+#define L_SLAVE_X0_ADDRESS 0x1d20
+#define L_SLAVE_X0_COMMAND_AND_ID 0x1d24
+#define L_SLAVE_X1_ADDRESS 0x1d28
+#define L_SLAVE_X1_COMMAND_AND_ID 0x1d2c
+#define L_SLAVE_WRITE_DATA_LOW 0x1d30
+#define L_SLAVE_WRITE_DATA_HIGH 0x1d34
+#define L_SLAVE_WRITE_BYTE_ENABLE 0x1d60
+#define L_SLAVE_READ_DATA_LOW 0x1d38
+#define L_SLAVE_READ_DATA_HIGH 0x1d3c
+#define L_SLAVE_READ_ID 0x1d64
/****************************************/
-/* PCI Configuration Function 0 */
+/* PCI Configuration Function 0 */
/****************************************/
-#define PCI_DEVICE_AND_VENDOR_ID 0x000
-#define PCI_STATUS_AND_COMMAND 0x004
-#define PCI_CLASS_CODE_AND_REVISION_ID 0x008
-#define PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C
-#define PCI_SCS_0_BASE_ADDRESS 0x010
-#define PCI_SCS_1_BASE_ADDRESS 0x014
-#define PCI_SCS_2_BASE_ADDRESS 0x018
-#define PCI_SCS_3_BASE_ADDRESS 0x01C
-#define PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS 0x020
-#define PCI_INTERNAL_REGISTERS_I_OMAPPED_BASE_ADDRESS 0x024
-#define PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02C
-#define PCI_EXPANSION_ROM_BASE_ADDRESS_REGISTER 0x030
-#define PCI_CAPABILTY_LIST_POINTER 0x034
-#define PCI_INTERRUPT_PIN_AND_LINE 0x03C
-#define PCI_POWER_MANAGEMENT_CAPABILITY 0x040
-#define PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044
-#define PCI_VPD_ADDRESS 0x048
-#define PCI_VPD_DATA 0x04c
-#define PCI_MSI_MESSAGE_CONTROL 0x050
-#define PCI_MSI_MESSAGE_ADDRESS 0x054
-#define PCI_MSI_MESSAGE_UPPER_ADDRESS 0x058
-#define PCI_MSI_MESSAGE_DATA 0x05c
-#define PCI_COMPACT_PCI_HOT_SWAP_CAPABILITY 0x058
+#define PCI_DEVICE_AND_VENDOR_ID 0x000
+#define PCI_STATUS_AND_COMMAND 0x004
+#define PCI_CLASS_CODE_AND_REVISION_ID 0x008
+#define PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C
+#define PCI_SCS_0_BASE_ADDRESS 0x010
+#define PCI_SCS_1_BASE_ADDRESS 0x014
+#define PCI_SCS_2_BASE_ADDRESS 0x018
+#define PCI_SCS_3_BASE_ADDRESS 0x01C
+#define PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS 0x020
+#define PCI_INTERNAL_REGISTERS_I_OMAPPED_BASE_ADDRESS 0x024
+#define PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02C
+#define PCI_EXPANSION_ROM_BASE_ADDRESS_REGISTER 0x030
+#define PCI_CAPABILTY_LIST_POINTER 0x034
+#define PCI_INTERRUPT_PIN_AND_LINE 0x03C
+#define PCI_POWER_MANAGEMENT_CAPABILITY 0x040
+#define PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044
+#define PCI_VPD_ADDRESS 0x048
+#define PCI_VPD_DATA 0x04c
+#define PCI_MSI_MESSAGE_CONTROL 0x050
+#define PCI_MSI_MESSAGE_ADDRESS 0x054
+#define PCI_MSI_MESSAGE_UPPER_ADDRESS 0x058
+#define PCI_MSI_MESSAGE_DATA 0x05c
+#define PCI_COMPACT_PCI_HOT_SWAP_CAPABILITY 0x058
/****************************************/
-/* PCI Configuration Function 1 */
+/* PCI Configuration Function 1 */
/****************************************/
-#define PCI_CS_0_BASE_ADDRESS 0x110
-#define PCI_CS_1_BASE_ADDRESS 0x114
-#define PCI_CS_2_BASE_ADDRESS 0x118
-#define PCI_CS_3_BASE_ADDRESS 0x11c
-#define PCI_BOOTCS_BASE_ADDRESS 0x120
+#define PCI_CS_0_BASE_ADDRESS 0x110
+#define PCI_CS_1_BASE_ADDRESS 0x114
+#define PCI_CS_2_BASE_ADDRESS 0x118
+#define PCI_CS_3_BASE_ADDRESS 0x11c
+#define PCI_BOOTCS_BASE_ADDRESS 0x120
/****************************************/
-/* PCI Configuration Function 2 */
+/* PCI Configuration Function 2 */
/****************************************/
-#define PCI_P2P_MEM0_BASE_ADDRESS 0x210
-#define PCI_P2P_MEM1_BASE_ADDRESS 0x214
-#define PCI_P2P_I_O_BASE_ADDRESS 0x218
-#define PCI_CPU_BASE_ADDRESS 0x21c
+#define PCI_P2P_MEM0_BASE_ADDRESS 0x210
+#define PCI_P2P_MEM1_BASE_ADDRESS 0x214
+#define PCI_P2P_I_O_BASE_ADDRESS 0x218
+#define PCI_CPU_BASE_ADDRESS 0x21c
/****************************************/
-/* PCI Configuration Function 4 */
+/* PCI Configuration Function 4 */
/****************************************/
-#define PCI_DAC_SCS_0_BASE_ADDRESS_LOW 0x410
-#define PCI_DAC_SCS_0_BASE_ADDRESS_HIGH 0x414
-#define PCI_DAC_SCS_1_BASE_ADDRESS_LOW 0x418
-#define PCI_DAC_SCS_1_BASE_ADDRESS_HIGH 0x41c
-#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_LOW 0x420
-#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_HIGH 0x424
-
-
-/****************************************/
-/* PCI Configuration Function 5 */
-/****************************************/
-
-#define PCI_DAC_SCS_2_BASE_ADDRESS_LOW 0x510
-#define PCI_DAC_SCS_2_BASE_ADDRESS_HIGH 0x514
-#define PCI_DAC_SCS_3_BASE_ADDRESS_LOW 0x518
-#define PCI_DAC_SCS_3_BASE_ADDRESS_HIGH 0x51c
-#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_LOW 0x520
-#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_HIGH 0x524
+#define PCI_DAC_SCS_0_BASE_ADDRESS_LOW 0x410
+#define PCI_DAC_SCS_0_BASE_ADDRESS_HIGH 0x414
+#define PCI_DAC_SCS_1_BASE_ADDRESS_LOW 0x418
+#define PCI_DAC_SCS_1_BASE_ADDRESS_HIGH 0x41c
+#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_LOW 0x420
+#define PCI_DAC_P2P_MEM0_BASE_ADDRESS_HIGH 0x424
+
+
+/****************************************/
+/* PCI Configuration Function 5 */
+/****************************************/
+
+#define PCI_DAC_SCS_2_BASE_ADDRESS_LOW 0x510
+#define PCI_DAC_SCS_2_BASE_ADDRESS_HIGH 0x514
+#define PCI_DAC_SCS_3_BASE_ADDRESS_LOW 0x518
+#define PCI_DAC_SCS_3_BASE_ADDRESS_HIGH 0x51c
+#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_LOW 0x520
+#define PCI_DAC_P2P_MEM1_BASE_ADDRESS_HIGH 0x524
-/****************************************/
-/* PCI Configuration Function 6 */
-/****************************************/
-
-#define PCI_DAC_CS_0_BASE_ADDRESS_LOW 0x610
-#define PCI_DAC_CS_0_BASE_ADDRESS_HIGH 0x614
-#define PCI_DAC_CS_1_BASE_ADDRESS_LOW 0x618
-#define PCI_DAC_CS_1_BASE_ADDRESS_HIGH 0x61c
-#define PCI_DAC_CS_2_BASE_ADDRESS_LOW 0x620
-#define PCI_DAC_CS_2_BASE_ADDRESS_HIGH 0x624
-
-/****************************************/
-/* PCI Configuration Function 7 */
-/****************************************/
-
-#define PCI_DAC_CS_3_BASE_ADDRESS_LOW 0x710
-#define PCI_DAC_CS_3_BASE_ADDRESS_HIGH 0x714
-#define PCI_DAC_BOOTCS_BASE_ADDRESS_LOW 0x718
-#define PCI_DAC_BOOTCS_BASE_ADDRESS_HIGH 0x71c
-#define PCI_DAC_CPU_BASE_ADDRESS_LOW 0x720
-#define PCI_DAC_CPU_BASE_ADDRESS_HIGH 0x724
-
-/****************************************/
-/* Interrupts */
-/****************************************/
-
-#define LOW_INTERRUPT_CAUSE_REGISTER 0xc18
-#define HIGH_INTERRUPT_CAUSE_REGISTER 0xc68
-#define CPU_INTERRUPT_MASK_REGISTER_LOW 0xc1c
-#define CPU_INTERRUPT_MASK_REGISTER_HIGH 0xc6c
-#define CPU_SELECT_CAUSE_REGISTER 0xc70
-#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW 0xc24
-#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0xc64
-#define PCI_0SELECT_CAUSE 0xc74
-#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW 0xca4
-#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0xce4
-#define PCI_1SELECT_CAUSE 0xcf4
-#define CPU_INT_0_MASK 0xe60
-#define CPU_INT_1_MASK 0xe64
-#define CPU_INT_2_MASK 0xe68
-#define CPU_INT_3_MASK 0xe6c
-
-/****************************************/
-/* I20 Support registers */
-/****************************************/
-
-#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x010
-#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x014
-#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x018
-#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x01C
-#define INBOUND_DOORBELL_REGISTER_PCI_SIDE 0x020
-#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x024
-#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x028
-#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE 0x02C
-#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x030
-#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x034
-#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x040
-#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x044
-#define QUEUE_CONTROL_REGISTER_PCI_SIDE 0x050
-#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE 0x054
-#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x060
-#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x064
-#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x068
-#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x06C
-#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x070
-#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x074
-#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x078
-#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x07C
-
-#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1C10
-#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1C14
-#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1C18
-#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1C1C
-#define INBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1C20
-#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1C24
-#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1C28
-#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1C2C
-#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1C30
-#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1C34
-#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1C40
-#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1C44
-#define QUEUE_CONTROL_REGISTER_CPU_SIDE 0x1C50
-#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE 0x1C54
-#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C60
-#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C64
-#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C68
-#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C6C
-#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C70
-#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C74
-#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C78
-#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C7C
-
-/****************************************/
-/* Communication Unit Registers */
-/****************************************/
-
-#define ETHERNET_0_ADDRESS_CONTROL_LOW 0xf200
-#define ETHERNET_0_ADDRESS_CONTROL_HIGH 0xf204
-#define ETHERNET_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf208
-#define ETHERNET_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf20c
-#define ETHERNET_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf210
-#define ETHERNET_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf214
-#define ETHERNET_0_HASH_TABLE_PCI_HIGH_ADDRESS 0xf218
-#define ETHERNET_1_ADDRESS_CONTROL_LOW 0xf220
-#define ETHERNET_1_ADDRESS_CONTROL_HIGH 0xf224
-#define ETHERNET_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf228
-#define ETHERNET_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf22c
-#define ETHERNET_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf230
-#define ETHERNET_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf234
-#define ETHERNET_1_HASH_TABLE_PCI_HIGH_ADDRESS 0xf238
-#define ETHERNET_2_ADDRESS_CONTROL_LOW 0xf240
-#define ETHERNET_2_ADDRESS_CONTROL_HIGH 0xf244
-#define ETHERNET_2_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf248
-#define ETHERNET_2_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf24c
-#define ETHERNET_2_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf250
-#define ETHERNET_2_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf254
-#define ETHERNET_2_HASH_TABLE_PCI_HIGH_ADDRESS 0xf258
-#define MPSC_0_ADDRESS_CONTROL_LOW 0xf280
-#define MPSC_0_ADDRESS_CONTROL_HIGH 0xf284
-#define MPSC_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf288
-#define MPSC_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf28c
-#define MPSC_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf290
-#define MPSC_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf294
-#define MPSC_1_ADDRESS_CONTROL_LOW 0xf2c0
-#define MPSC_1_ADDRESS_CONTROL_HIGH 0xf2c4
-#define MPSC_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf2c8
-#define MPSC_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf2cc
-#define MPSC_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf2d0
-#define MPSC_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf2d4
-#define SERIAL_INIT_PCI_HIGH_ADDRESS 0xf320
-#define SERIAL_INIT_LAST_DATA 0xf324
-#define SERIAL_INIT_STATUS_AND_CONTROL 0xf328
-#define COMM_UNIT_ARBITER_CONTROL 0xf300
-#define COMM_UNIT_CROSS_BAR_TIMEOUT 0xf304
-#define COMM_UNIT_INTERRUPT_CAUSE 0xf310
-#define COMM_UNIT_INTERRUPT_MASK 0xf314
-#define COMM_UNIT_ERROR_ADDRESS 0xf314
-
-/****************************************/
-/* Cunit Debug (for internal use) */
-/****************************************/
-
-#define CUNIT_ADDRESS 0xf340
-#define CUNIT_COMMAND_AND_ID 0xf344
-#define CUNIT_WRITE_DATA_LOW 0xf348
-#define CUNIT_WRITE_DATA_HIGH 0xf34c
-#define CUNIT_WRITE_BYTE_ENABLE 0xf358
-#define CUNIT_READ_DATA_LOW 0xf350
-#define CUNIT_READ_DATA_HIGH 0xf354
-#define CUNIT_READ_ID 0xf35c
-
-/****************************************/
-/* Fast Ethernet Unit Registers */
+/****************************************/
+/* PCI Configuration Function 6 */
+/****************************************/
+
+#define PCI_DAC_CS_0_BASE_ADDRESS_LOW 0x610
+#define PCI_DAC_CS_0_BASE_ADDRESS_HIGH 0x614
+#define PCI_DAC_CS_1_BASE_ADDRESS_LOW 0x618
+#define PCI_DAC_CS_1_BASE_ADDRESS_HIGH 0x61c
+#define PCI_DAC_CS_2_BASE_ADDRESS_LOW 0x620
+#define PCI_DAC_CS_2_BASE_ADDRESS_HIGH 0x624
+
+/****************************************/
+/* PCI Configuration Function 7 */
+/****************************************/
+
+#define PCI_DAC_CS_3_BASE_ADDRESS_LOW 0x710
+#define PCI_DAC_CS_3_BASE_ADDRESS_HIGH 0x714
+#define PCI_DAC_BOOTCS_BASE_ADDRESS_LOW 0x718
+#define PCI_DAC_BOOTCS_BASE_ADDRESS_HIGH 0x71c
+#define PCI_DAC_CPU_BASE_ADDRESS_LOW 0x720
+#define PCI_DAC_CPU_BASE_ADDRESS_HIGH 0x724
+
+/****************************************/
+/* Interrupts */
+/****************************************/
+
+#define LOW_INTERRUPT_CAUSE_REGISTER 0xc18
+#define HIGH_INTERRUPT_CAUSE_REGISTER 0xc68
+#define CPU_INTERRUPT_MASK_REGISTER_LOW 0xc1c
+#define CPU_INTERRUPT_MASK_REGISTER_HIGH 0xc6c
+#define CPU_SELECT_CAUSE_REGISTER 0xc70
+#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW 0xc24
+#define PCI_0INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0xc64
+#define PCI_0SELECT_CAUSE 0xc74
+#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_LOW 0xca4
+#define PCI_1INTERRUPT_CAUSE_MASK_REGISTER_HIGH 0xce4
+#define PCI_1SELECT_CAUSE 0xcf4
+#define CPU_INT_0_MASK 0xe60
+#define CPU_INT_1_MASK 0xe64
+#define CPU_INT_2_MASK 0xe68
+#define CPU_INT_3_MASK 0xe6c
+
+/****************************************/
+/* I20 Support registers */
+/****************************************/
+
+#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x010
+#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x014
+#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x018
+#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x01C
+#define INBOUND_DOORBELL_REGISTER_PCI_SIDE 0x020
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x024
+#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x028
+#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE 0x02C
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x030
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x034
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x040
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x044
+#define QUEUE_CONTROL_REGISTER_PCI_SIDE 0x050
+#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE 0x054
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x060
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x064
+#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x068
+#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x06C
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x070
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x074
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x078
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x07C
+
+#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1C10
+#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1C14
+#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1C18
+#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1C1C
+#define INBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1C20
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1C24
+#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1C28
+#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1C2C
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1C30
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1C34
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1C40
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1C44
+#define QUEUE_CONTROL_REGISTER_CPU_SIDE 0x1C50
+#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE 0x1C54
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C60
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C64
+#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C68
+#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C6C
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C70
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C74
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1C78
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1C7C
+
+/****************************************/
+/* Communication Unit Registers */
+/****************************************/
+
+#define ETHERNET_0_ADDRESS_CONTROL_LOW 0xf200
+#define ETHERNET_0_ADDRESS_CONTROL_HIGH 0xf204
+#define ETHERNET_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf208
+#define ETHERNET_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf20c
+#define ETHERNET_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf210
+#define ETHERNET_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf214
+#define ETHERNET_0_HASH_TABLE_PCI_HIGH_ADDRESS 0xf218
+#define ETHERNET_1_ADDRESS_CONTROL_LOW 0xf220
+#define ETHERNET_1_ADDRESS_CONTROL_HIGH 0xf224
+#define ETHERNET_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf228
+#define ETHERNET_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf22c
+#define ETHERNET_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf230
+#define ETHERNET_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf234
+#define ETHERNET_1_HASH_TABLE_PCI_HIGH_ADDRESS 0xf238
+#define ETHERNET_2_ADDRESS_CONTROL_LOW 0xf240
+#define ETHERNET_2_ADDRESS_CONTROL_HIGH 0xf244
+#define ETHERNET_2_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf248
+#define ETHERNET_2_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf24c
+#define ETHERNET_2_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf250
+#define ETHERNET_2_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf254
+#define ETHERNET_2_HASH_TABLE_PCI_HIGH_ADDRESS 0xf258
+#define MPSC_0_ADDRESS_CONTROL_LOW 0xf280
+#define MPSC_0_ADDRESS_CONTROL_HIGH 0xf284
+#define MPSC_0_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf288
+#define MPSC_0_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf28c
+#define MPSC_0_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf290
+#define MPSC_0_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf294
+#define MPSC_1_ADDRESS_CONTROL_LOW 0xf2c0
+#define MPSC_1_ADDRESS_CONTROL_HIGH 0xf2c4
+#define MPSC_1_RECEIVE_BUFFER_PCI_HIGH_ADDRESS 0xf2c8
+#define MPSC_1_TRANSMIT_BUFFER_PCI_HIGH_ADDRESS 0xf2cc
+#define MPSC_1_RECEIVE_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf2d0
+#define MPSC_1_TRANSMIT_DESCRIPTOR_PCI_HIGH_ADDRESS 0xf2d4
+#define SERIAL_INIT_PCI_HIGH_ADDRESS 0xf320
+#define SERIAL_INIT_LAST_DATA 0xf324
+#define SERIAL_INIT_STATUS_AND_CONTROL 0xf328
+#define COMM_UNIT_ARBITER_CONTROL 0xf300
+#define COMM_UNIT_CROSS_BAR_TIMEOUT 0xf304
+#define COMM_UNIT_INTERRUPT_CAUSE 0xf310
+#define COMM_UNIT_INTERRUPT_MASK 0xf314
+#define COMM_UNIT_ERROR_ADDRESS 0xf314
+
+/****************************************/
+/* Cunit Debug (for internal use) */
+/****************************************/
+
+#define CUNIT_ADDRESS 0xf340
+#define CUNIT_COMMAND_AND_ID 0xf344
+#define CUNIT_WRITE_DATA_LOW 0xf348
+#define CUNIT_WRITE_DATA_HIGH 0xf34c
+#define CUNIT_WRITE_BYTE_ENABLE 0xf358
+#define CUNIT_READ_DATA_LOW 0xf350
+#define CUNIT_READ_DATA_HIGH 0xf354
+#define CUNIT_READ_ID 0xf35c
+
+/****************************************/
+/* Fast Ethernet Unit Registers */
/****************************************/
/* Ethernet */
-#define ETHERNET_PHY_ADDRESS_REGISTER 0x2000
-#define ETHERNET_SMI_REGISTER 0x2010
+#define ETHERNET_PHY_ADDRESS_REGISTER 0x2000
+#define ETHERNET_SMI_REGISTER 0x2010
/* Ethernet 0 */
-#define ETHERNET0_PORT_CONFIGURATION_REGISTER 0x2400
-#define ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER 0x2408
-#define ETHERNET0_PORT_COMMAND_REGISTER 0x2410
-#define ETHERNET0_PORT_STATUS_REGISTER 0x2418
-#define ETHERNET0_SERIAL_PARAMETRS_REGISTER 0x2420
-#define ETHERNET0_HASH_TABLE_POINTER_REGISTER 0x2428
-#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2430
-#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2438
-#define ETHERNET0_SDMA_CONFIGURATION_REGISTER 0x2440
-#define ETHERNET0_SDMA_COMMAND_REGISTER 0x2448
-#define ETHERNET0_INTERRUPT_CAUSE_REGISTER 0x2450
-#define ETHERNET0_INTERRUPT_MASK_REGISTER 0x2458
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0 0x2480
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER1 0x2484
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER2 0x2488
-#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER3 0x248c
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0 0x24a0
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER1 0x24a4
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER2 0x24a8
-#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER3 0x24ac
-#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0 0x24e0
-#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER1 0x24e4
-#define ETHERNET0_MIB_COUNTER_BASE 0x2500
+#define ETHERNET0_PORT_CONFIGURATION_REGISTER 0x2400
+#define ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER 0x2408
+#define ETHERNET0_PORT_COMMAND_REGISTER 0x2410
+#define ETHERNET0_PORT_STATUS_REGISTER 0x2418
+#define ETHERNET0_SERIAL_PARAMETRS_REGISTER 0x2420
+#define ETHERNET0_HASH_TABLE_POINTER_REGISTER 0x2428
+#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2430
+#define ETHERNET0_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2438
+#define ETHERNET0_SDMA_CONFIGURATION_REGISTER 0x2440
+#define ETHERNET0_SDMA_COMMAND_REGISTER 0x2448
+#define ETHERNET0_INTERRUPT_CAUSE_REGISTER 0x2450
+#define ETHERNET0_INTERRUPT_MASK_REGISTER 0x2458
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0 0x2480
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER1 0x2484
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER2 0x2488
+#define ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER3 0x248c
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0 0x24a0
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER1 0x24a4
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER2 0x24a8
+#define ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER3 0x24ac
+#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0 0x24e0
+#define ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER1 0x24e4
+#define ETHERNET0_MIB_COUNTER_BASE 0x2500
/* Ethernet 1 */
-#define ETHERNET1_PORT_CONFIGURATION_REGISTER 0x2800
-#define ETHERNET1_PORT_CONFIGURATION_EXTEND_REGISTER 0x2808
-#define ETHERNET1_PORT_COMMAND_REGISTER 0x2810
-#define ETHERNET1_PORT_STATUS_REGISTER 0x2818
-#define ETHERNET1_SERIAL_PARAMETRS_REGISTER 0x2820
-#define ETHERNET1_HASH_TABLE_POINTER_REGISTER 0x2828
-#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2830
-#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2838
-#define ETHERNET1_SDMA_CONFIGURATION_REGISTER 0x2840
-#define ETHERNET1_SDMA_COMMAND_REGISTER 0x2848
-#define ETHERNET1_INTERRUPT_CAUSE_REGISTER 0x2850
-#define ETHERNET1_INTERRUPT_MASK_REGISTER 0x2858
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER0 0x2880
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER1 0x2884
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER2 0x2888
-#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER3 0x288c
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER0 0x28a0
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER1 0x28a4
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER2 0x28a8
-#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER3 0x28ac
-#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER0 0x28e0
-#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER1 0x28e4
-#define ETHERNET1_MIB_COUNTER_BASE 0x2900
+#define ETHERNET1_PORT_CONFIGURATION_REGISTER 0x2800
+#define ETHERNET1_PORT_CONFIGURATION_EXTEND_REGISTER 0x2808
+#define ETHERNET1_PORT_COMMAND_REGISTER 0x2810
+#define ETHERNET1_PORT_STATUS_REGISTER 0x2818
+#define ETHERNET1_SERIAL_PARAMETRS_REGISTER 0x2820
+#define ETHERNET1_HASH_TABLE_POINTER_REGISTER 0x2828
+#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2830
+#define ETHERNET1_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2838
+#define ETHERNET1_SDMA_CONFIGURATION_REGISTER 0x2840
+#define ETHERNET1_SDMA_COMMAND_REGISTER 0x2848
+#define ETHERNET1_INTERRUPT_CAUSE_REGISTER 0x2850
+#define ETHERNET1_INTERRUPT_MASK_REGISTER 0x2858
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER0 0x2880
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER1 0x2884
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER2 0x2888
+#define ETHERNET1_FIRST_RX_DESCRIPTOR_POINTER3 0x288c
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER0 0x28a0
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER1 0x28a4
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER2 0x28a8
+#define ETHERNET1_CURRENT_RX_DESCRIPTOR_POINTER3 0x28ac
+#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER0 0x28e0
+#define ETHERNET1_CURRENT_TX_DESCRIPTOR_POINTER1 0x28e4
+#define ETHERNET1_MIB_COUNTER_BASE 0x2900
/* Ethernet 2 */
-#define ETHERNET2_PORT_CONFIGURATION_REGISTER 0x2c00
-#define ETHERNET2_PORT_CONFIGURATION_EXTEND_REGISTER 0x2c08
-#define ETHERNET2_PORT_COMMAND_REGISTER 0x2c10
-#define ETHERNET2_PORT_STATUS_REGISTER 0x2c18
-#define ETHERNET2_SERIAL_PARAMETRS_REGISTER 0x2c20
-#define ETHERNET2_HASH_TABLE_POINTER_REGISTER 0x2c28
-#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2c30
-#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2c38
-#define ETHERNET2_SDMA_CONFIGURATION_REGISTER 0x2c40
-#define ETHERNET2_SDMA_COMMAND_REGISTER 0x2c48
-#define ETHERNET2_INTERRUPT_CAUSE_REGISTER 0x2c50
-#define ETHERNET2_INTERRUPT_MASK_REGISTER 0x2c58
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER0 0x2c80
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER1 0x2c84
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER2 0x2c88
-#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER3 0x2c8c
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER0 0x2ca0
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER1 0x2ca4
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER2 0x2ca8
-#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER3 0x2cac
-#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER0 0x2ce0
-#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER1 0x2ce4
-#define ETHERNET2_MIB_COUNTER_BASE 0x2d00
-
-/****************************************/
-/* SDMA Registers */
-/****************************************/
-
-#define SDMA_GROUP_CONFIGURATION_REGISTER 0xb1f0
-#define CHANNEL0_CONFIGURATION_REGISTER 0x4000
-#define CHANNEL0_COMMAND_REGISTER 0x4008
-#define CHANNEL0_RX_CMD_STATUS 0x4800
-#define CHANNEL0_RX_PACKET_AND_BUFFER_SIZES 0x4804
-#define CHANNEL0_RX_BUFFER_POINTER 0x4808
-#define CHANNEL0_RX_NEXT_POINTER 0x480c
-#define CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER 0x4810
-#define CHANNEL0_TX_CMD_STATUS 0x4C00
-#define CHANNEL0_TX_PACKET_SIZE 0x4C04
-#define CHANNEL0_TX_BUFFER_POINTER 0x4C08
-#define CHANNEL0_TX_NEXT_POINTER 0x4C0c
-#define CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER 0x4c10
-#define CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER 0x4c14
-#define CHANNEL1_CONFIGURATION_REGISTER 0x5000
-#define CHANNEL1_COMMAND_REGISTER 0x5008
-#define CHANNEL1_RX_CMD_STATUS 0x5800
-#define CHANNEL1_RX_PACKET_AND_BUFFER_SIZES 0x5804
-#define CHANNEL1_RX_BUFFER_POINTER 0x5808
-#define CHANNEL1_RX_NEXT_POINTER 0x580c
-#define CHANNEL1_TX_CMD_STATUS 0x5C00
-#define CHANNEL1_TX_PACKET_SIZE 0x5C04
-#define CHANNEL1_TX_BUFFER_POINTER 0x5C08
-#define CHANNEL1_TX_NEXT_POINTER 0x5C0c
-#define CHANNEL1_CURRENT_RX_DESCRIPTOR_POINTER 0x5810
-#define CHANNEL1_CURRENT_TX_DESCRIPTOR_POINTER 0x5c10
-#define CHANNEL1_FIRST_TX_DESCRIPTOR_POINTER 0x5c14
-#define CHANNEL2_CONFIGURATION_REGISTER 0x6000
-#define CHANNEL2_COMMAND_REGISTER 0x6008
-#define CHANNEL2_RX_CMD_STATUS 0x6800
-#define CHANNEL2_RX_PACKET_AND_BUFFER_SIZES 0x6804
-#define CHANNEL2_RX_BUFFER_POINTER 0x6808
-#define CHANNEL2_RX_NEXT_POINTER 0x680c
-#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER 0x6810
-#define CHANNEL2_TX_CMD_STATUS 0x6C00
-#define CHANNEL2_TX_PACKET_SIZE 0x6C04
-#define CHANNEL2_TX_BUFFER_POINTER 0x6C08
-#define CHANNEL2_TX_NEXT_POINTER 0x6C0c
-#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER 0x6810
-#define CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER 0x6c10
-#define CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER 0x6c14
+#define ETHERNET2_PORT_CONFIGURATION_REGISTER 0x2c00
+#define ETHERNET2_PORT_CONFIGURATION_EXTEND_REGISTER 0x2c08
+#define ETHERNET2_PORT_COMMAND_REGISTER 0x2c10
+#define ETHERNET2_PORT_STATUS_REGISTER 0x2c18
+#define ETHERNET2_SERIAL_PARAMETRS_REGISTER 0x2c20
+#define ETHERNET2_HASH_TABLE_POINTER_REGISTER 0x2c28
+#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_LOW 0x2c30
+#define ETHERNET2_FLOW_CONTROL_SOURCE_ADDRESS_HIGH 0x2c38
+#define ETHERNET2_SDMA_CONFIGURATION_REGISTER 0x2c40
+#define ETHERNET2_SDMA_COMMAND_REGISTER 0x2c48
+#define ETHERNET2_INTERRUPT_CAUSE_REGISTER 0x2c50
+#define ETHERNET2_INTERRUPT_MASK_REGISTER 0x2c58
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER0 0x2c80
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER1 0x2c84
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER2 0x2c88
+#define ETHERNET2_FIRST_RX_DESCRIPTOR_POINTER3 0x2c8c
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER0 0x2ca0
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER1 0x2ca4
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER2 0x2ca8
+#define ETHERNET2_CURRENT_RX_DESCRIPTOR_POINTER3 0x2cac
+#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER0 0x2ce0
+#define ETHERNET2_CURRENT_TX_DESCRIPTOR_POINTER1 0x2ce4
+#define ETHERNET2_MIB_COUNTER_BASE 0x2d00
+
+/****************************************/
+/* SDMA Registers */
+/****************************************/
+
+#define SDMA_GROUP_CONFIGURATION_REGISTER 0xb1f0
+#define CHANNEL0_CONFIGURATION_REGISTER 0x4000
+#define CHANNEL0_COMMAND_REGISTER 0x4008
+#define CHANNEL0_RX_CMD_STATUS 0x4800
+#define CHANNEL0_RX_PACKET_AND_BUFFER_SIZES 0x4804
+#define CHANNEL0_RX_BUFFER_POINTER 0x4808
+#define CHANNEL0_RX_NEXT_POINTER 0x480c
+#define CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER 0x4810
+#define CHANNEL0_TX_CMD_STATUS 0x4C00
+#define CHANNEL0_TX_PACKET_SIZE 0x4C04
+#define CHANNEL0_TX_BUFFER_POINTER 0x4C08
+#define CHANNEL0_TX_NEXT_POINTER 0x4C0c
+#define CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER 0x4c10
+#define CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER 0x4c14
+#define CHANNEL1_CONFIGURATION_REGISTER 0x5000
+#define CHANNEL1_COMMAND_REGISTER 0x5008
+#define CHANNEL1_RX_CMD_STATUS 0x5800
+#define CHANNEL1_RX_PACKET_AND_BUFFER_SIZES 0x5804
+#define CHANNEL1_RX_BUFFER_POINTER 0x5808
+#define CHANNEL1_RX_NEXT_POINTER 0x580c
+#define CHANNEL1_TX_CMD_STATUS 0x5C00
+#define CHANNEL1_TX_PACKET_SIZE 0x5C04
+#define CHANNEL1_TX_BUFFER_POINTER 0x5C08
+#define CHANNEL1_TX_NEXT_POINTER 0x5C0c
+#define CHANNEL1_CURRENT_RX_DESCRIPTOR_POINTER 0x5810
+#define CHANNEL1_CURRENT_TX_DESCRIPTOR_POINTER 0x5c10
+#define CHANNEL1_FIRST_TX_DESCRIPTOR_POINTER 0x5c14
+#define CHANNEL2_CONFIGURATION_REGISTER 0x6000
+#define CHANNEL2_COMMAND_REGISTER 0x6008
+#define CHANNEL2_RX_CMD_STATUS 0x6800
+#define CHANNEL2_RX_PACKET_AND_BUFFER_SIZES 0x6804
+#define CHANNEL2_RX_BUFFER_POINTER 0x6808
+#define CHANNEL2_RX_NEXT_POINTER 0x680c
+#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER 0x6810
+#define CHANNEL2_TX_CMD_STATUS 0x6C00
+#define CHANNEL2_TX_PACKET_SIZE 0x6C04
+#define CHANNEL2_TX_BUFFER_POINTER 0x6C08
+#define CHANNEL2_TX_NEXT_POINTER 0x6C0c
+#define CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER 0x6810
+#define CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER 0x6c10
+#define CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER 0x6c14
/* SDMA Interrupt */
-#define SDMA_CAUSE 0xb820
-#define SDMA_MASK 0xb8a0
+#define SDMA_CAUSE 0xb820
+#define SDMA_MASK 0xb8a0
/****************************************/
-/* Baude Rate Generators Registers */
+/* Baude Rate Generators Registers */
/****************************************/
/* BRG 0 */
-#define BRG0_CONFIGURATION_REGISTER 0xb200
-#define BRG0_BAUDE_TUNING_REGISTER 0xb204
+#define BRG0_CONFIGURATION_REGISTER 0xb200
+#define BRG0_BAUDE_TUNING_REGISTER 0xb204
/* BRG 1 */
-#define BRG1_CONFIGURATION_REGISTER 0xb208
-#define BRG1_BAUDE_TUNING_REGISTER 0xb20c
+#define BRG1_CONFIGURATION_REGISTER 0xb208
+#define BRG1_BAUDE_TUNING_REGISTER 0xb20c
/* BRG 2 */
-#define BRG2_CONFIGURATION_REGISTER 0xb210
-#define BRG2_BAUDE_TUNING_REGISTER 0xb214
+#define BRG2_CONFIGURATION_REGISTER 0xb210
+#define BRG2_BAUDE_TUNING_REGISTER 0xb214
/* BRG Interrupts */
-#define BRG_CAUSE_REGISTER 0xb834
-#define BRG_MASK_REGISTER 0xb8b4
+#define BRG_CAUSE_REGISTER 0xb834
+#define BRG_MASK_REGISTER 0xb8b4
/* MISC */
-#define MAIN_ROUTING_REGISTER 0xb400
-#define RECEIVE_CLOCK_ROUTING_REGISTER 0xb404
-#define TRANSMIT_CLOCK_ROUTING_REGISTER 0xb408
-#define COMM_UNIT_ARBITER_CONFIGURATION_REGISTER 0xb40c
-#define WATCHDOG_CONFIGURATION_REGISTER 0xb410
-#define WATCHDOG_VALUE_REGISTER 0xb414
+#define MAIN_ROUTING_REGISTER 0xb400
+#define RECEIVE_CLOCK_ROUTING_REGISTER 0xb404
+#define TRANSMIT_CLOCK_ROUTING_REGISTER 0xb408
+#define COMM_UNIT_ARBITER_CONFIGURATION_REGISTER 0xb40c
+#define WATCHDOG_CONFIGURATION_REGISTER 0xb410
+#define WATCHDOG_VALUE_REGISTER 0xb414
/****************************************/
-/* Flex TDM Registers */
+/* Flex TDM Registers */
/****************************************/
/* FTDM Port */
-#define FLEXTDM_TRANSMIT_READ_POINTER 0xa800
-#define FLEXTDM_RECEIVE_READ_POINTER 0xa804
-#define FLEXTDM_CONFIGURATION_REGISTER 0xa808
-#define FLEXTDM_AUX_CHANNELA_TX_REGISTER 0xa80c
-#define FLEXTDM_AUX_CHANNELA_RX_REGISTER 0xa810
-#define FLEXTDM_AUX_CHANNELB_TX_REGISTER 0xa814
-#define FLEXTDM_AUX_CHANNELB_RX_REGISTER 0xa818
+#define FLEXTDM_TRANSMIT_READ_POINTER 0xa800
+#define FLEXTDM_RECEIVE_READ_POINTER 0xa804
+#define FLEXTDM_CONFIGURATION_REGISTER 0xa808
+#define FLEXTDM_AUX_CHANNELA_TX_REGISTER 0xa80c
+#define FLEXTDM_AUX_CHANNELA_RX_REGISTER 0xa810
+#define FLEXTDM_AUX_CHANNELB_TX_REGISTER 0xa814
+#define FLEXTDM_AUX_CHANNELB_RX_REGISTER 0xa818
/* FTDM Interrupts */
-#define FTDM_CAUSE_REGISTER 0xb830
-#define FTDM_MASK_REGISTER 0xb8b0
+#define FTDM_CAUSE_REGISTER 0xb830
+#define FTDM_MASK_REGISTER 0xb8b0
/****************************************/
-/* GPP Interface Registers */
+/* GPP Interface Registers */
/****************************************/
-#define GPP_IO_CONTROL 0xf100
-#define GPP_LEVEL_CONTROL 0xf110
-#define GPP_VALUE 0xf104
-#define GPP_INTERRUPT_CAUSE 0xf108
-#define GPP_INTERRUPT_MASK 0xf10c
+#define GPP_IO_CONTROL 0xf100
+#define GPP_LEVEL_CONTROL 0xf110
+#define GPP_VALUE 0xf104
+#define GPP_INTERRUPT_CAUSE 0xf108
+#define GPP_INTERRUPT_MASK 0xf10c
-#define MPP_CONTROL0 0xf000
-#define MPP_CONTROL1 0xf004
-#define MPP_CONTROL2 0xf008
-#define MPP_CONTROL3 0xf00c
-#define DEBUG_PORT_MULTIPLEX 0xf014
-#define SERIAL_PORT_MULTIPLEX 0xf010
+#define MPP_CONTROL0 0xf000
+#define MPP_CONTROL1 0xf004
+#define MPP_CONTROL2 0xf008
+#define MPP_CONTROL3 0xf00c
+#define DEBUG_PORT_MULTIPLEX 0xf014
+#define SERIAL_PORT_MULTIPLEX 0xf010
/****************************************/
-/* I2C Registers */
+/* I2C Registers */
/****************************************/
-#define I2C_SLAVE_ADDRESS 0xc000
-#define I2C_EXTENDED_SLAVE_ADDRESS 0xc040
-#define I2C_DATA 0xc004
-#define I2C_CONTROL 0xc008
-#define I2C_STATUS_BAUDE_RATE 0xc00C
-#define I2C_SOFT_RESET 0xc01c
+#define I2C_SLAVE_ADDRESS 0xc000
+#define I2C_EXTENDED_SLAVE_ADDRESS 0xc040
+#define I2C_DATA 0xc004
+#define I2C_CONTROL 0xc008
+#define I2C_STATUS_BAUDE_RATE 0xc00C
+#define I2C_SOFT_RESET 0xc01c
/****************************************/
-/* MPSC Registers */
+/* MPSC Registers */
/****************************************/
/* MPSC0 */
-#define MPSC0_MAIN_CONFIGURATION_LOW 0x8000
-#define MPSC0_MAIN_CONFIGURATION_HIGH 0x8004
-#define MPSC0_PROTOCOL_CONFIGURATION 0x8008
-#define CHANNEL0_REGISTER1 0x800c
-#define CHANNEL0_REGISTER2 0x8010
-#define CHANNEL0_REGISTER3 0x8014
-#define CHANNEL0_REGISTER4 0x8018
-#define CHANNEL0_REGISTER5 0x801c
-#define CHANNEL0_REGISTER6 0x8020
-#define CHANNEL0_REGISTER7 0x8024
-#define CHANNEL0_REGISTER8 0x8028
-#define CHANNEL0_REGISTER9 0x802c
-#define CHANNEL0_REGISTER10 0x8030
-#define CHANNEL0_REGISTER11 0x8034
+#define MPSC0_MAIN_CONFIGURATION_LOW 0x8000
+#define MPSC0_MAIN_CONFIGURATION_HIGH 0x8004
+#define MPSC0_PROTOCOL_CONFIGURATION 0x8008
+#define CHANNEL0_REGISTER1 0x800c
+#define CHANNEL0_REGISTER2 0x8010
+#define CHANNEL0_REGISTER3 0x8014
+#define CHANNEL0_REGISTER4 0x8018
+#define CHANNEL0_REGISTER5 0x801c
+#define CHANNEL0_REGISTER6 0x8020
+#define CHANNEL0_REGISTER7 0x8024
+#define CHANNEL0_REGISTER8 0x8028
+#define CHANNEL0_REGISTER9 0x802c
+#define CHANNEL0_REGISTER10 0x8030
+#define CHANNEL0_REGISTER11 0x8034
/* MPSC1 */
-#define MPSC1_MAIN_CONFIGURATION_LOW 0x8840
-#define MPSC1_MAIN_CONFIGURATION_HIGH 0x8844
-#define MPSC1_PROTOCOL_CONFIGURATION 0x8848
-#define CHANNEL1_REGISTER1 0x884c
-#define CHANNEL1_REGISTER2 0x8850
-#define CHANNEL1_REGISTER3 0x8854
-#define CHANNEL1_REGISTER4 0x8858
-#define CHANNEL1_REGISTER5 0x885c
-#define CHANNEL1_REGISTER6 0x8860
-#define CHANNEL1_REGISTER7 0x8864
-#define CHANNEL1_REGISTER8 0x8868
-#define CHANNEL1_REGISTER9 0x886c
-#define CHANNEL1_REGISTER10 0x8870
-#define CHANNEL1_REGISTER11 0x8874
+#define MPSC1_MAIN_CONFIGURATION_LOW 0x8840
+#define MPSC1_MAIN_CONFIGURATION_HIGH 0x8844
+#define MPSC1_PROTOCOL_CONFIGURATION 0x8848
+#define CHANNEL1_REGISTER1 0x884c
+#define CHANNEL1_REGISTER2 0x8850
+#define CHANNEL1_REGISTER3 0x8854
+#define CHANNEL1_REGISTER4 0x8858
+#define CHANNEL1_REGISTER5 0x885c
+#define CHANNEL1_REGISTER6 0x8860
+#define CHANNEL1_REGISTER7 0x8864
+#define CHANNEL1_REGISTER8 0x8868
+#define CHANNEL1_REGISTER9 0x886c
+#define CHANNEL1_REGISTER10 0x8870
+#define CHANNEL1_REGISTER11 0x8874
/* MPSC2 */
-#define MPSC2_MAIN_CONFIGURATION_LOW 0x9040
-#define MPSC2_MAIN_CONFIGURATION_HIGH 0x9044
-#define MPSC2_PROTOCOL_CONFIGURATION 0x9048
-#define CHANNEL2_REGISTER1 0x904c
-#define CHANNEL2_REGISTER2 0x9050
-#define CHANNEL2_REGISTER3 0x9054
-#define CHANNEL2_REGISTER4 0x9058
-#define CHANNEL2_REGISTER5 0x905c
-#define CHANNEL2_REGISTER6 0x9060
-#define CHANNEL2_REGISTER7 0x9064
-#define CHANNEL2_REGISTER8 0x9068
-#define CHANNEL2_REGISTER9 0x906c
-#define CHANNEL2_REGISTER10 0x9070
-#define CHANNEL2_REGISTER11 0x9074
+#define MPSC2_MAIN_CONFIGURATION_LOW 0x9040
+#define MPSC2_MAIN_CONFIGURATION_HIGH 0x9044
+#define MPSC2_PROTOCOL_CONFIGURATION 0x9048
+#define CHANNEL2_REGISTER1 0x904c
+#define CHANNEL2_REGISTER2 0x9050
+#define CHANNEL2_REGISTER3 0x9054
+#define CHANNEL2_REGISTER4 0x9058
+#define CHANNEL2_REGISTER5 0x905c
+#define CHANNEL2_REGISTER6 0x9060
+#define CHANNEL2_REGISTER7 0x9064
+#define CHANNEL2_REGISTER8 0x9068
+#define CHANNEL2_REGISTER9 0x906c
+#define CHANNEL2_REGISTER10 0x9070
+#define CHANNEL2_REGISTER11 0x9074
/* MPSCs Interupts */
-#define MPSC0_CAUSE 0xb824
-#define MPSC0_MASK 0xb8a4
-#define MPSC1_CAUSE 0xb828
-#define MPSC1_MASK 0xb8a8
-#define MPSC2_CAUSE 0xb82c
-#define MPSC2_MASK 0xb8ac
+#define MPSC0_CAUSE 0xb824
+#define MPSC0_MASK 0xb8a4
+#define MPSC1_CAUSE 0xb828
+#define MPSC1_MASK 0xb8a8
+#define MPSC2_CAUSE 0xb82c
+#define MPSC2_MASK 0xb8ac
#endif /* __INCgt64260rh */
diff --git a/include/i2c.h b/include/i2c.h
index 6e6c845..a51c164 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -113,9 +113,9 @@ void i2c_reg_write(uchar chip, uchar reg, uchar val);
* Change the active I2C bus. Subsequent read/write calls will
* go to this one.
*
- * bus - bus index, zero based
+ * bus - bus index, zero based
*
- * Returns: 0 on success, not 0 on failure
+ * Returns: 0 on success, not 0 on failure
*
*/
int i2c_set_bus_num(unsigned int bus);
@@ -133,9 +133,9 @@ unsigned int i2c_get_bus_num(void);
*
* Change the speed of the active I2C bus
*
- * speed - bus speed in Hz
+ * speed - bus speed in Hz
*
- * Returns: 0 on success, not 0 on failure
+ * Returns: 0 on success, not 0 on failure
*
*/
int i2c_set_bus_speed(unsigned int);
diff --git a/include/libfdt.h b/include/libfdt.h
index beeacb2..2a2b23d 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -142,15 +142,15 @@ int fdt_next_node(const void *fdt, int offset, int *depth);
#define fdt_get_header(fdt, field) \
(fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
-#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
+#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize))
#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct))
#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings))
#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap))
#define fdt_version(fdt) (fdt_get_header(fdt, version))
-#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
-#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
-#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
+#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
+#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
+#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct))
#define __fdt_set_hdr(name) \
@@ -445,7 +445,7 @@ uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
* 0, on success
* buf contains the absolute path of the node at
* nodeoffset, as a NUL-terminated string.
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
* -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
* characters and will not fit in the given buffer.
* -FDT_ERR_BADMAGIC,
@@ -478,7 +478,7 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
* structure block offset of the node at node offset's ancestor
* of depth supernodedepth (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
@@ -501,7 +501,7 @@ int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
*
* returns:
* depth of the node at nodeoffset (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
@@ -524,7 +524,7 @@ int fdt_node_depth(const void *fdt, int nodeoffset);
* returns:
* stucture block offset of the parent of the node at nodeoffset
* (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
@@ -564,7 +564,7 @@ int fdt_parent_offset(const void *fdt, int nodeoffset);
* on success
* -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
* tree after startoffset
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
@@ -611,7 +611,7 @@ int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
* 1, if the node has a 'compatible' property, but it does not list
* the given string
* -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
- * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
@@ -648,7 +648,7 @@ int fdt_node_check_compatible(const void *fdt, int nodeoffset,
* on success
* -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
* tree after startoffset
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index f194cf1..bffb25b 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -26,8 +26,8 @@
* struct nand_bbt_descr - bad block table descriptor
* @param options options for this descriptor
* @param pages the page(s) where we find the bbt, used with
- * option BBT_ABSPAGE when bbt is searched,
- * then we store the found bbts pages here.
+ * option BBT_ABSPAGE when bbt is searched,
+ * then we store the found bbts pages here.
* Its an array and supports up to 8 chips now
* @param offs offset of the pattern in the oob area of the page
* @param veroffs offset of the bbt version counter in the oob are of the page
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index eeb1d7e..29f6767 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -19,8 +19,8 @@ struct DiskOnChip;
#define DoC_DOCControl 0x1002
#define DoC_FloorSelect 0x1003
#define DoC_CDSNControl 0x1004
-#define DoC_CDSNDeviceSelect 0x1005
-#define DoC_ECCConf 0x1006
+#define DoC_CDSNDeviceSelect 0x1005
+#define DoC_ECCConf 0x1006
#define DoC_2k_ECCStatus 0x1007
#define DoC_CDSNSlowIO 0x100d
@@ -30,15 +30,15 @@ struct DiskOnChip;
#define DoC_ECCSyndrome3 0x1013
#define DoC_ECCSyndrome4 0x1014
#define DoC_ECCSyndrome5 0x1015
-#define DoC_AliasResolution 0x101b
+#define DoC_AliasResolution 0x101b
#define DoC_ConfigInput 0x101c
-#define DoC_ReadPipeInit 0x101d
-#define DoC_WritePipeTerm 0x101e
-#define DoC_LastDataRead 0x101f
-#define DoC_NOP 0x1020
+#define DoC_ReadPipeInit 0x101d
+#define DoC_WritePipeTerm 0x101e
+#define DoC_LastDataRead 0x101f
+#define DoC_NOP 0x1020
-#define DoC_Mil_CDSN_IO 0x0800
-#define DoC_2k_CDSN_IO 0x1800
+#define DoC_Mil_CDSN_IO 0x0800
+#define DoC_2k_CDSN_IO 0x1800
#define ReadDOC_(adr, reg) ((volatile unsigned char)(*(volatile __u8 *)(((unsigned long)adr)+((reg)))))
#define WriteDOC_(d, adr, reg) do{ *(volatile __u8 *)(((unsigned long)adr)+((reg))) = (__u8)d; eieio();} while(0)
@@ -49,32 +49,32 @@ struct DiskOnChip;
#define ReadDOC(adr, reg) ReadDOC_(adr,DoC_##reg)
#define WriteDOC(d, adr, reg) WriteDOC_(d,adr,DoC_##reg)
-#define DOC_MODE_RESET 0
-#define DOC_MODE_NORMAL 1
-#define DOC_MODE_RESERVED1 2
-#define DOC_MODE_RESERVED2 3
-
-#define DOC_MODE_MDWREN 4
-#define DOC_MODE_CLR_ERR 0x80
-
-#define DOC_ChipID_UNKNOWN 0x00
-#define DOC_ChipID_Doc2k 0x20
-#define DOC_ChipID_DocMil 0x30
-
-#define CDSN_CTRL_FR_B 0x80
-#define CDSN_CTRL_ECC_IO 0x20
-#define CDSN_CTRL_FLASH_IO 0x10
-#define CDSN_CTRL_WP 0x08
-#define CDSN_CTRL_ALE 0x04
-#define CDSN_CTRL_CLE 0x02
-#define CDSN_CTRL_CE 0x01
-
-#define DOC_ECC_RESET 0
-#define DOC_ECC_ERROR 0x80
-#define DOC_ECC_RW 0x20
-#define DOC_ECC__EN 0x08
-#define DOC_TOGGLE_BIT 0x04
-#define DOC_ECC_RESV 0x02
+#define DOC_MODE_RESET 0
+#define DOC_MODE_NORMAL 1
+#define DOC_MODE_RESERVED1 2
+#define DOC_MODE_RESERVED2 3
+
+#define DOC_MODE_MDWREN 4
+#define DOC_MODE_CLR_ERR 0x80
+
+#define DOC_ChipID_UNKNOWN 0x00
+#define DOC_ChipID_Doc2k 0x20
+#define DOC_ChipID_DocMil 0x30
+
+#define CDSN_CTRL_FR_B 0x80
+#define CDSN_CTRL_ECC_IO 0x20
+#define CDSN_CTRL_FLASH_IO 0x10
+#define CDSN_CTRL_WP 0x08
+#define CDSN_CTRL_ALE 0x04
+#define CDSN_CTRL_CLE 0x02
+#define CDSN_CTRL_CE 0x01
+
+#define DOC_ECC_RESET 0
+#define DOC_ECC_ERROR 0x80
+#define DOC_ECC_RW 0x20
+#define DOC_ECC__EN 0x08
+#define DOC_TOGGLE_BIT 0x04
+#define DOC_ECC_RESV 0x02
#define DOC_ECC_IGNORE 0x01
/* We have to also set the reserved bit 1 for enable */
diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h
index 3d1d416..72d7341 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/linux/mtd/mtd-abi.h
@@ -46,7 +46,7 @@ struct mtd_oob_buf {
/* Types of automatic ECC/Checksum available */
-#define MTD_ECC_NONE 0 /* No automatic ECC available */
+#define MTD_ECC_NONE 0 /* No automatic ECC available */
#define MTD_ECC_RS_DiskOnChip 1 /* Automatic ECC on DiskOnChip */
#define MTD_ECC_SW 2 /* SW ECC for Toshiba & Samsung devices */
@@ -55,7 +55,7 @@ struct mtd_oob_buf {
#define MTD_NANDECC_PLACE 1 /* Use the given placement in the structure (YAFFS1 legacy mode) */
#define MTD_NANDECC_AUTOPLACE 2 /* Use the default placement scheme */
#define MTD_NANDECC_PLACEONLY 3 /* Use the given placement in the structure (Do not store ecc result on read) */
-#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */
+#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */
struct mtd_info_user {
uint8_t type;
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 13e9080..71cb2d5 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -13,7 +13,7 @@
#define MAX_MTD_DEVICES 16
-#define MTD_ERASE_PENDING 0x01
+#define MTD_ERASE_PENDING 0x01
#define MTD_ERASING 0x02
#define MTD_ERASE_SUSPEND 0x04
#define MTD_ERASE_DONE 0x08
@@ -202,7 +202,7 @@ static inline void mtd_erase_callback(struct erase_info *instr)
#ifdef CONFIG_MTD_DEBUG
#define DEBUG(n, args...) \
- do { \
+ do { \
if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
printk(KERN_INFO args); \
} while(0)
diff --git a/include/linux/mtd/nand_legacy.h b/include/linux/mtd/nand_legacy.h
index a8769e7..b05e726 100644
--- a/include/linux/mtd/nand_legacy.h
+++ b/include/linux/mtd/nand_legacy.h
@@ -104,12 +104,12 @@ struct Nand {
};
struct nand_chip {
- int page_shift;
- u_char *data_buf;
- u_char *data_cache;
+ int page_shift;
+ u_char *data_buf;
+ u_char *data_cache;
int cache_page;
- u_char ecc_code_buf[6];
- u_char reserved[2];
+ u_char ecc_code_buf[6];
+ u_char reserved[2];
char ChipID; /* Type of DiskOnChip */
struct Nand *chips;
int chipshift;
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index 4381306..b0337c3 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -89,11 +89,11 @@ struct NFTLrecord {
__u16 numvunits;
__u16 lastEUN; /* should be suppressed */
__u16 numfreeEUNs;
- __u16 LastFreeEUN; /* To speed up finding a free EUN */
+ __u16 LastFreeEUN; /* To speed up finding a free EUN */
__u32 nr_sects;
int head,sect,cyl;
- __u16 *EUNtable; /* [numvunits]: First EUN for each virtual unit */
- __u16 *ReplUnitTable; /* [numEUNs]: ReplUnitNumber for each */
+ __u16 *EUNtable; /* [numvunits]: First EUN for each virtual unit */
+ __u16 *ReplUnitTable; /* [numEUNs]: ReplUnitNumber for each */
unsigned int nb_blocks; /* number of physical blocks */
unsigned int nb_boot_blocks; /* number of blocks used by the bios */
};
diff --git a/include/lists.h b/include/lists.h
index 804b5cd..10a2a19 100644
--- a/include/lists.h
+++ b/include/lists.h
@@ -1,8 +1,8 @@
#ifndef _LISTS_H_
#define _LISTS_H_
-#define LIST_START -1 /* Handy Constants that substitute for item positions */
-#define LIST_END 0 /* END_OF_LIST means one past current length of list when */
+#define LIST_START -1 /* Handy Constants that substitute for item positions */
+#define LIST_END 0 /* END_OF_LIST means one past current length of list when */
/* inserting. Otherwise it refers the last item in the list. */
typedef struct
diff --git a/include/lxt971a.h b/include/lxt971a.h
index 2b5b6d4..f76c336 100644
--- a/include/lxt971a.h
+++ b/include/lxt971a.h
@@ -30,75 +30,75 @@
#define __LXT971A_H__
/* PHY definitions (LXT971A) [2] */
-#define PHY_COMMON_CTRL (0x00)
-#define PHY_COMMON_STAT (0x01)
-#define PHY_COMMON_ID1 (0x02)
-#define PHY_COMMON_ID2 (0x03)
-#define PHY_COMMON_AUTO_ADV (0x04)
-#define PHY_COMMON_AUTO_LNKB (0x05)
-#define PHY_COMMON_AUTO_EXP (0x06)
-#define PHY_COMMON_AUTO_NEXT (0x07)
-#define PHY_COMMON_AUTO_LNKN (0x08)
-#define PHY_LXT971_PORT_CFG (0x10)
-#define PHY_LXT971_STAT2 (0x11)
-#define PHY_LXT971_INT_ENABLE (0x12)
-#define PHY_LXT971_INT_STATUS (0x13)
-#define PHY_LXT971_LED_CFG (0x14)
-#define PHY_LXT971_DIG_CFG (0x1A)
-#define PHY_LXT971_TX_CTRL (0x1E)
+#define PHY_COMMON_CTRL (0x00)
+#define PHY_COMMON_STAT (0x01)
+#define PHY_COMMON_ID1 (0x02)
+#define PHY_COMMON_ID2 (0x03)
+#define PHY_COMMON_AUTO_ADV (0x04)
+#define PHY_COMMON_AUTO_LNKB (0x05)
+#define PHY_COMMON_AUTO_EXP (0x06)
+#define PHY_COMMON_AUTO_NEXT (0x07)
+#define PHY_COMMON_AUTO_LNKN (0x08)
+#define PHY_LXT971_PORT_CFG (0x10)
+#define PHY_LXT971_STAT2 (0x11)
+#define PHY_LXT971_INT_ENABLE (0x12)
+#define PHY_LXT971_INT_STATUS (0x13)
+#define PHY_LXT971_LED_CFG (0x14)
+#define PHY_LXT971_DIG_CFG (0x1A)
+#define PHY_LXT971_TX_CTRL (0x1E)
/* CTRL PHY Control Register Bit Fields */
-#define PHY_COMMON_CTRL_RESET (0x8000)
-#define PHY_COMMON_CTRL_LOOPBACK (0x4000)
-#define PHY_COMMON_CTRL_SPD_MA (0x2040)
-#define PHY_COMMON_CTRL_SPD_10 (0x0000)
-#define PHY_COMMON_CTRL_SPD_100 (0x2000)
-#define PHY_COMMON_CTRL_SPD_1000 (0x0040)
-#define PHY_COMMON_CTRL_SPD_RES (0x2040)
-#define PHY_COMMON_CTRL_AUTO_NEG (0x1000)
-#define PHY_COMMON_CTRL_POWER_DN (0x0800)
-#define PHY_COMMON_CTRL_ISOLATE (0x0400)
-#define PHY_COMMON_CTRL_RES_AUTO (0x0200)
-#define PHY_COMMON_CTRL_DUPLEX (0x0100)
-#define PHY_COMMON_CTRL_COL_TEST (0x0080)
-#define PHY_COMMON_CTRL_RES1 (0x003F)
+#define PHY_COMMON_CTRL_RESET (0x8000)
+#define PHY_COMMON_CTRL_LOOPBACK (0x4000)
+#define PHY_COMMON_CTRL_SPD_MA (0x2040)
+#define PHY_COMMON_CTRL_SPD_10 (0x0000)
+#define PHY_COMMON_CTRL_SPD_100 (0x2000)
+#define PHY_COMMON_CTRL_SPD_1000 (0x0040)
+#define PHY_COMMON_CTRL_SPD_RES (0x2040)
+#define PHY_COMMON_CTRL_AUTO_NEG (0x1000)
+#define PHY_COMMON_CTRL_POWER_DN (0x0800)
+#define PHY_COMMON_CTRL_ISOLATE (0x0400)
+#define PHY_COMMON_CTRL_RES_AUTO (0x0200)
+#define PHY_COMMON_CTRL_DUPLEX (0x0100)
+#define PHY_COMMON_CTRL_COL_TEST (0x0080)
+#define PHY_COMMON_CTRL_RES1 (0x003F)
/* STAT Status Register Bit Fields */
-#define PHY_COMMON_STAT_100BT4 (0x8000)
-#define PHY_COMMON_STAT_100BXFD (0x4000)
-#define PHY_COMMON_STAT_100BXHD (0x2000)
-#define PHY_COMMON_STAT_10BTFD (0x1000)
-#define PHY_COMMON_STAT_10BTHD (0x0800)
-#define PHY_COMMON_STAT_100BT2FD (0x0400)
-#define PHY_COMMON_STAT_100BT2HD (0x0200)
-#define PHY_COMMON_STAT_EXT_STAT (0x0100)
-#define PHY_COMMON_STAT_RES1 (0x0080)
-#define PHY_COMMON_STAT_MF_PSUP (0x0040)
-#define PHY_COMMON_STAT_AN_COMP (0x0020)
-#define PHY_COMMON_STAT_RMT_FLT (0x0010)
-#define PHY_COMMON_STAT_AN_CAP (0x0008)
-#define PHY_COMMON_STAT_LNK_STAT (0x0004)
-#define PHY_COMMON_STAT_JAB_DTCT (0x0002)
-#define PHY_COMMON_STAT_EXT_CAP (0x0001)
+#define PHY_COMMON_STAT_100BT4 (0x8000)
+#define PHY_COMMON_STAT_100BXFD (0x4000)
+#define PHY_COMMON_STAT_100BXHD (0x2000)
+#define PHY_COMMON_STAT_10BTFD (0x1000)
+#define PHY_COMMON_STAT_10BTHD (0x0800)
+#define PHY_COMMON_STAT_100BT2FD (0x0400)
+#define PHY_COMMON_STAT_100BT2HD (0x0200)
+#define PHY_COMMON_STAT_EXT_STAT (0x0100)
+#define PHY_COMMON_STAT_RES1 (0x0080)
+#define PHY_COMMON_STAT_MF_PSUP (0x0040)
+#define PHY_COMMON_STAT_AN_COMP (0x0020)
+#define PHY_COMMON_STAT_RMT_FLT (0x0010)
+#define PHY_COMMON_STAT_AN_CAP (0x0008)
+#define PHY_COMMON_STAT_LNK_STAT (0x0004)
+#define PHY_COMMON_STAT_JAB_DTCT (0x0002)
+#define PHY_COMMON_STAT_EXT_CAP (0x0001)
/* AUTO_ADV Auto-neg Advert Register Bit Fields */
-#define PHY_COMMON_AUTO_ADV_NP (0x8000)
+#define PHY_COMMON_AUTO_ADV_NP (0x8000)
#define PHY_COMMON_AUTO_ADV_RES1 (0x4000)
#define PHY_COMMON_AUTO_ADV_RMT_FLT (0x2000)
#define PHY_COMMON_AUTO_ADV_RES2 (0x1000)
#define PHY_COMMON_AUTO_ADV_AS_PAUSE (0x0800)
#define PHY_COMMON_AUTO_ADV_PAUSE (0x0400)
#define PHY_COMMON_AUTO_ADV_100BT4 (0x0200)
-#define PHY_COMMON_AUTO_ADV_100BTXFD (0x0100)
+#define PHY_COMMON_AUTO_ADV_100BTXFD (0x0100)
#define PHY_COMMON_AUTO_ADV_100BTX (0x0080)
-#define PHY_COMMON_AUTO_ADV_10BTFD (0x0040)
-#define PHY_COMMON_AUTO_ADV_10BT (0x0020)
+#define PHY_COMMON_AUTO_ADV_10BTFD (0x0040)
+#define PHY_COMMON_AUTO_ADV_10BT (0x0020)
#define PHY_COMMON_AUTO_ADV_SEL_FLD_MA (0x001F)
#define PHY_COMMON_AUTO_ADV_802_9 (0x0002)
#define PHY_COMMON_AUTO_ADV_802_3 (0x0001)
/* AUTO_LNKB Auto-neg Link Ability Register Bit Fields */
-#define PHY_COMMON_AUTO_LNKB_NP (0x8000)
+#define PHY_COMMON_AUTO_LNKB_NP (0x8000)
#define PHY_COMMON_AUTO_LNKB_ACK (0x4000)
#define PHY_COMMON_AUTO_LNKB_RMT_FLT (0x2000)
#define PHY_COMMON_AUTO_LNKB_RES2 (0x1000)
@@ -107,8 +107,8 @@
#define PHY_COMMON_AUTO_LNKB_100BT4 (0x0200)
#define PHY_COMMON_AUTO_LNKB_100BTXFD (0x0100)
#define PHY_COMMON_AUTO_LNKB_100BTX (0x0080)
-#define PHY_COMMON_AUTO_LNKB_10BTFD (0x0040)
-#define PHY_COMMON_AUTO_LNKB_10BT (0x0020)
+#define PHY_COMMON_AUTO_LNKB_10BTFD (0x0040)
+#define PHY_COMMON_AUTO_LNKB_10BT (0x0020)
#define PHY_COMMON_AUTO_LNKB_SEL_FLD_MA (0x001F)
#define PHY_COMMON_AUTO_LNKB_802_9 (0x0002)
#define PHY_COMMON_AUTO_LNKB_802_3 (0x0001)
@@ -159,20 +159,20 @@
#define PHY_LXT971_PORT_CFG_FIBER_SEL (0x0001)
/* STAT2 Status Register #2 Bit Fields */
-#define PHY_LXT971_STAT2_RES1 (0x8000)
-#define PHY_LXT971_STAT2_100BTX (0x4000)
+#define PHY_LXT971_STAT2_RES1 (0x8000)
+#define PHY_LXT971_STAT2_100BTX (0x4000)
#define PHY_LXT971_STAT2_TX_STATUS (0x2000)
#define PHY_LXT971_STAT2_RX_STATUS (0x1000)
#define PHY_LXT971_STAT2_COL_STATUS (0x0800)
-#define PHY_LXT971_STAT2_LINK (0x0400)
+#define PHY_LXT971_STAT2_LINK (0x0400)
#define PHY_LXT971_STAT2_DUPLEX_MODE (0x0200)
#define PHY_LXT971_STAT2_AUTO_NEG (0x0100)
-#define PHY_LXT971_STAT2_AUTO_NEG_COMP (0x0080)
-#define PHY_LXT971_STAT2_RES2 (0x0040)
+#define PHY_LXT971_STAT2_AUTO_NEG_COMP (0x0080)
+#define PHY_LXT971_STAT2_RES2 (0x0040)
#define PHY_LXT971_STAT2_POLARITY (0x0020)
-#define PHY_LXT971_STAT2_PAUSE (0x0010)
-#define PHY_LXT971_STAT2_ERROR (0x0008)
-#define PHY_LXT971_STAT2_RES3 (0x0007)
+#define PHY_LXT971_STAT2_PAUSE (0x0010)
+#define PHY_LXT971_STAT2_ERROR (0x0008)
+#define PHY_LXT971_STAT2_RES3 (0x0007)
/* INT_ENABLE Interrupt Enable Register Bit Fields */
#define PHY_LXT971_INT_ENABLE_RES1 (0xFF00)
@@ -225,11 +225,11 @@
#define PHY_LXT971_LED_CFG_SPEED (0x0000)
/* DIG_CFG Digitial Configuration Register Bit Fields */
-#define PHY_LXT971_DIG_CFG_RES1 (0xF000)
+#define PHY_LXT971_DIG_CFG_RES1 (0xF000)
#define PHY_LXT971_DIG_CFG_MII_DRIVE (0x0800)
-#define PHY_LXT971_DIG_CFG_RES2 (0x0400)
+#define PHY_LXT971_DIG_CFG_RES2 (0x0400)
#define PHY_LXT971_DIG_CFG_SHOW_SYMBOL (0x0200)
-#define PHY_LXT971_DIG_CFG_RES3 (0x01FF)
+#define PHY_LXT971_DIG_CFG_RES3 (0x01FF)
#define PHY_LXT971_MDIO_MAX_CLK (8000000)
#define PHY_MDIO_MAX_CLK (2500000)
diff --git a/include/mpc106.h b/include/mpc106.h
index ab6d57e..10ed0f4 100644
--- a/include/mpc106.h
+++ b/include/mpc106.h
@@ -28,7 +28,7 @@
* Defines for the MPC106 PCI Config address and data registers followed by
* defines for the standard PCI device configuration header.
*/
-#define PCIDEVID_MPC106 0x0
+#define PCIDEVID_MPC106 0x0
/*
* MPC106 Registers
@@ -36,7 +36,7 @@
#define MPC106_REG 0x80000000
#ifdef CFG_ADDRESS_MAP_A
-#define MPC106_REG_ADDR 0x80000cf8
+#define MPC106_REG_ADDR 0x80000cf8
#define MPC106_REG_DATA 0x80000cfc
#define MPC106_ISA_IO_PHYS 0x80000000
#define MPC106_ISA_IO_BUS 0x00000000
@@ -51,7 +51,7 @@
#define MPC106_PCI_MEMORY_BUS 0x80000000
#define MPC106_PCI_MEMORY_SIZE 0x80000000
#else
-#define MPC106_REG_ADDR 0xfec00cf8
+#define MPC106_REG_ADDR 0xfec00cf8
#define MPC106_REG_DATA 0xfee00cfc
#define MPC106_ISA_MEM_PHYS 0xfd000000
#define MPC106_ISA_MEM_BUS 0x00000000
@@ -77,9 +77,9 @@
#define PCI_STAT_NO_RSV_BITS 0xffff
-#define PCI_BUSNUM 0x40
-#define PCI_SUBBUSNUM 0x41
-#define PCI_DISCOUNT 0x42
+#define PCI_BUSNUM 0x40
+#define PCI_SUBBUSNUM 0x41
+#define PCI_DISCOUNT 0x42
#define PCI_PICR1 0xA8
#define PICR1_CF_CBA(value) ((value & 0xff) << 24)
diff --git a/include/net.h b/include/net.h
index 9a2f03f..79ddfa2 100644
--- a/include/net.h
+++ b/include/net.h
@@ -240,7 +240,7 @@ typedef struct
/*
* ICMP stuff (just enough to handle (host) redirect messages)
*/
-#define ICMP_ECHO_REPLY 0 /* Echo reply */
+#define ICMP_ECHO_REPLY 0 /* Echo reply */
#define ICMP_REDIRECT 5 /* Redirect (change route) */
#define ICMP_ECHO_REQUEST 8 /* Echo request */
@@ -327,12 +327,12 @@ extern unsigned NetIPID; /* IP ID (counting) */
extern uchar NetBcastAddr[6]; /* Ethernet boardcast address */
extern uchar NetEtherNullAddr[6];
-#define VLAN_NONE 4095 /* untagged */
-#define VLAN_IDMASK 0x0fff /* mask of valid vlan id */
-extern ushort NetOurVLAN; /* Our VLAN */
-extern ushort NetOurNativeVLAN; /* Our Native VLAN */
+#define VLAN_NONE 4095 /* untagged */
+#define VLAN_IDMASK 0x0fff /* mask of valid vlan id */
+extern ushort NetOurVLAN; /* Our VLAN */
+extern ushort NetOurNativeVLAN; /* Our Native VLAN */
-extern uchar NetCDPAddr[6]; /* Ethernet CDP address */
+extern uchar NetCDPAddr[6]; /* Ethernet CDP address */
extern ushort CDPNativeVLAN; /* CDP returned native VLAN */
extern ushort CDPApplianceVLAN; /* CDP returned appliance VLAN */
@@ -352,7 +352,7 @@ typedef enum { BOOTP, RARP, ARP, TFTP, DHCP, PING, DNS, NFS, CDP, NETCONS, SNTP
extern char BootFile[128]; /* Boot File name */
#if defined(CONFIG_CMD_PING)
-extern IPaddr_t NetPingIP; /* the ip address to ping */
+extern IPaddr_t NetPingIP; /* the ip address to ping */
#endif
#if defined(CONFIG_CMD_CDP)
@@ -362,7 +362,7 @@ extern ushort CDPApplianceVLAN;
#endif
#if defined(CONFIG_CMD_SNTP)
-extern IPaddr_t NetNtpServerIP; /* the ip address to NTP */
+extern IPaddr_t NetNtpServerIP; /* the ip address to NTP */
extern int NetTimeOffset; /* offset time from UTC */
#endif
@@ -376,7 +376,7 @@ extern void NetStop(void);
extern void NetStartAgain(void);
/* Get size of the ethernet header when we send */
-extern int NetEthHdrSize(void);
+extern int NetEthHdrSize(void);
/* Set ethernet header; returns the size of the header */
extern int NetSetEther(volatile uchar *, uchar *, uint);
diff --git a/include/nios2-epcs.h b/include/nios2-epcs.h
index 20e0c87..325cf71 100644
--- a/include/nios2-epcs.h
+++ b/include/nios2-epcs.h
@@ -29,7 +29,7 @@
#define __NIOS2_EPCS_H__
typedef struct epcs_devinfo_t {
- const char *name; /* Device name */
+ const char *name; /* Device name */
unsigned char id; /* Device silicon id */
unsigned char size; /* Total size log2(bytes)*/
unsigned char num_sects; /* Number of sectors */
diff --git a/include/nios2-io.h b/include/nios2-io.h
index d5c8652..dc87f1f 100644
--- a/include/nios2-io.h
+++ b/include/nios2-io.h
@@ -156,14 +156,14 @@ typedef volatile struct nios_jtag_t {
#define NIOS_JTAG_WI (1 << 9) /* write intr pending*/
#define NIOS_JTAG_AC (1 << 10) /* activity indicator */
#define NIOS_JTAG_RRDY (1 << 12) /* read available */
-#define NIOS_JTAG_WSPACE(d) ((d)>>16) /* Write space avail */
+#define NIOS_JTAG_WSPACE(d) ((d)>>16) /* Write space avail */
/*------------------------------------------------------------------------
* SYSTEM ID
*----------------------------------------------------------------------*/
typedef volatile struct nios_sysid_t {
- unsigned id; /* The system build id*/
- unsigned timestamp; /* Timestamp */
+ unsigned id; /* The system build id*/
+ unsigned timestamp; /* Timestamp */
}nios_sysid_t;
#endif /* __NIOS2IO_H__ */
diff --git a/include/ns7520_eth.h b/include/ns7520_eth.h
index 5019802..123e6f4 100644
--- a/include/ns7520_eth.h
+++ b/include/ns7520_eth.h
@@ -28,7 +28,7 @@
/* The port addresses */
-#define NS7520_ETH_MODULE_BASE (0xFF800000)
+#define NS7520_ETH_MODULE_BASE (0xFF800000)
#define get_eth_reg_addr(c) \
((volatile unsigned int*) ( NS7520_ETH_MODULE_BASE+(unsigned int) (c)))
@@ -153,7 +153,7 @@
/* MAC1 MAC Configuration Register 1 Bit Fields*/
-#define NS7520_ETH_MAC1_RES1 (0xFFFF0000) /* Reserved */
+#define NS7520_ETH_MAC1_RES1 (0xFFFF0000) /* Reserved */
#define NS7520_ETH_MAC1_SRST (0x00008000) /* Soft Reset */
#define NS7520_ETH_MAC1_SIMMRST (0x00004000) /* Simulation Reset */
#define NS7520_ETH_MAC1_RES2 (0x00003000) /* Reserved */
@@ -170,7 +170,7 @@
/* MAC Configuration Register 2 Bit Fields*/
-#define NS7520_ETH_MAC2_RES1 (0xFFFF8000) /* Reserved */
+#define NS7520_ETH_MAC2_RES1 (0xFFFF8000) /* Reserved */
#define NS7520_ETH_MAC2_EDEFER (0x00004000) /* Excess Deferral */
#define NS7520_ETH_MAC2_BACKP (0x00002000) /* Backpressure/NO back off */
#define NS7520_ETH_MAC2_NOBO (0x00001000) /* No back off */
@@ -179,7 +179,7 @@
#define NS7520_ETH_MAC2_PUREP (0x00000100) /* Pure preamble enforcement */
#define NS7520_ETH_MAC2_AUTOP (0x00000080) /* Auto detect PAD enable */
#define NS7520_ETH_MAC2_VLANP (0x00000040) /* VLAN pad enable */
-#define NS7520_ETH_MAC2_PADEN (0x00000020) /* PAD/CRC enable */
+#define NS7520_ETH_MAC2_PADEN (0x00000020) /* PAD/CRC enable */
#define NS7520_ETH_MAC2_CRCEN (0x00000010) /* CRC enable */
#define NS7520_ETH_MAC2_DELCRC (0x00000008) /* Delayed CRC */
#define NS7520_ETH_MAC2_HUGE (0x00000004) /* Huge frame enable */
diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h
index 0918931..9485338 100644
--- a/include/ns9750_bbus.h
+++ b/include/ns9750_bbus.h
@@ -44,7 +44,7 @@
They should be wrapped by cli()/sti() */
#define set_gpio_cfg_reg_val(pin,cfg) \
*get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \
- ~NS9750_GPIO_CFG_MASK((pin))) |\
+ ~NS9750_GPIO_CFG_MASK((pin))) |\
NS9750_GPIO_CFG_VAL((pin),(cfg));
#define NS9750_GPIO_CFG_MASK(pin) (NS9750_GPIO_CFG_VAL(pin, \
@@ -93,16 +93,16 @@
#define NS9750_BBUS_DMA_INT_BINT12 (0x00001000)
#define NS9750_BBUS_DMA_INT_BINT11 (0x00000800)
#define NS9750_BBUS_DMA_INT_BINT10 (0x00000400)
-#define NS9750_BBUS_DMA_INT_BINT9 (0x00000200)
-#define NS9750_BBUS_DMA_INT_BINT8 (0x00000100)
-#define NS9750_BBUS_DMA_INT_BINT7 (0x00000080)
-#define NS9750_BBUS_DMA_INT_BINT6 (0x00000040)
-#define NS9750_BBUS_DMA_INT_BINT5 (0x00000020)
-#define NS9750_BBUS_DMA_INT_BINT4 (0x00000010)
-#define NS9750_BBUS_DMA_INT_BINT3 (0x00000008)
-#define NS9750_BBUS_DMA_INT_BINT2 (0x00000004)
-#define NS9750_BBUS_DMA_INT_BINT1 (0x00000002)
-#define NS9750_BBUS_DMA_INT_BINT0 (0x00000001)
+#define NS9750_BBUS_DMA_INT_BINT9 (0x00000200)
+#define NS9750_BBUS_DMA_INT_BINT8 (0x00000100)
+#define NS9750_BBUS_DMA_INT_BINT7 (0x00000080)
+#define NS9750_BBUS_DMA_INT_BINT6 (0x00000040)
+#define NS9750_BBUS_DMA_INT_BINT5 (0x00000020)
+#define NS9750_BBUS_DMA_INT_BINT4 (0x00000010)
+#define NS9750_BBUS_DMA_INT_BINT3 (0x00000008)
+#define NS9750_BBUS_DMA_INT_BINT2 (0x00000004)
+#define NS9750_BBUS_DMA_INT_BINT1 (0x00000002)
+#define NS9750_BBUS_DMA_INT_BINT0 (0x00000001)
#define NS9750_BBUS_USB_CFG_OUTEN (0x00000008)
#define NS9750_BBUS_USB_CFG_SPEED (0x00000004)
diff --git a/include/ns9750_eth.h b/include/ns9750_eth.h
index 978c0bb..a6e5889 100644
--- a/include/ns9750_eth.h
+++ b/include/ns9750_eth.h
@@ -33,19 +33,19 @@
#include "lxt971a.h"
-#define NS9750_ETH_MODULE_BASE (0xA0600000)
+#define NS9750_ETH_MODULE_BASE (0xA0600000)
#define get_eth_reg_addr(c) \
((volatile unsigned int*) ( NS9750_ETH_MODULE_BASE+(unsigned int) (c)))
-#define NS9750_ETH_EGCR1 (0x0000)
-#define NS9750_ETH_EGCR2 (0x0004)
-#define NS9750_ETH_EGSR (0x0008)
-#define NS9750_ETH_FIFORX (0x000C)
-#define NS9750_ETH_FIFOTX (0x0010)
-#define NS9750_ETH_FIFOTXS (0x0014)
-#define NS9750_ETH_ETSR (0x0018)
-#define NS9750_ETH_ERSR (0x001C)
+#define NS9750_ETH_EGCR1 (0x0000)
+#define NS9750_ETH_EGCR2 (0x0004)
+#define NS9750_ETH_EGSR (0x0008)
+#define NS9750_ETH_FIFORX (0x000C)
+#define NS9750_ETH_FIFOTX (0x0010)
+#define NS9750_ETH_FIFOTXS (0x0014)
+#define NS9750_ETH_ETSR (0x0018)
+#define NS9750_ETH_ERSR (0x001C)
#define NS9750_ETH_MAC1 (0x0400)
#define NS9750_ETH_MAC2 (0x0404)
#define NS9750_ETH_IPGT (0x0408)
@@ -64,9 +64,9 @@
#define NS9750_ETH_SA2 (0x0444)
#define NS9750_ETH_SA3 (0x0448)
#define NS9750_ETH_SAFR (0x0500)
-#define NS9750_ETH_HT1 (0x0504)
-#define NS9750_ETH_HT2 (0x0508)
-#define NS9750_ETH_STAT_BASE (0x0680)
+#define NS9750_ETH_HT1 (0x0504)
+#define NS9750_ETH_HT2 (0x0508)
+#define NS9750_ETH_STAT_BASE (0x0680)
#define NS9750_ETH_RXAPTR (0x0A00)
#define NS9750_ETH_RXBPTR (0x0A04)
#define NS9750_ETH_RXCPTR (0x0A08)
@@ -87,26 +87,26 @@
/* register bit fields */
-#define NS9750_ETH_EGCR1_ERX (0x80000000)
-#define NS9750_ETH_EGCR1_ERXDMA (0x40000000)
-#define NS9750_ETH_EGCR1_ERXSHT (0x10000000)
-#define NS9750_ETH_EGCR1_ERXSIZ (0x08000000)
-#define NS9750_ETH_EGCR1_ETXSIZ (0x04000000)
+#define NS9750_ETH_EGCR1_ERX (0x80000000)
+#define NS9750_ETH_EGCR1_ERXDMA (0x40000000)
+#define NS9750_ETH_EGCR1_ERXSHT (0x10000000)
+#define NS9750_ETH_EGCR1_ERXSIZ (0x08000000)
+#define NS9750_ETH_EGCR1_ETXSIZ (0x04000000)
#define NS9750_ETH_EGCR1_ETXDIAG (0x02000000)
-#define NS9750_ETH_EGCR1_ERXBAD (0x01000000)
-#define NS9750_ETH_EGCR1_ETX (0x00800000)
-#define NS9750_ETH_EGCR1_ETXDMA (0x00400000)
-#define NS9750_ETH_EGCR1_ETXWM (0x00200000)
-#define NS9750_ETH_EGCR1_ERXADV (0x00100000)
+#define NS9750_ETH_EGCR1_ERXBAD (0x01000000)
+#define NS9750_ETH_EGCR1_ETX (0x00800000)
+#define NS9750_ETH_EGCR1_ETXDMA (0x00400000)
+#define NS9750_ETH_EGCR1_ETXWM (0x00200000)
+#define NS9750_ETH_EGCR1_ERXADV (0x00100000)
#define NS9750_ETH_EGCR1_ERXINIT (0x00080000)
-#define NS9750_ETH_EGCR1_PHY_MODE_MA (0x0000C000)
-#define NS9750_ETH_EGCR1_PHY_MODE_MII (0x00008000)
-#define NS9750_ETH_EGCR1_PHY_MODE_RMII (0x00004000)
-#define NS9750_ETH_EGCR1_RXCINV (0x00001000)
-#define NS9750_ETH_EGCR1_TXCINV (0x00000800)
+#define NS9750_ETH_EGCR1_PHY_MODE_MA (0x0000C000)
+#define NS9750_ETH_EGCR1_PHY_MODE_MII (0x00008000)
+#define NS9750_ETH_EGCR1_PHY_MODE_RMII (0x00004000)
+#define NS9750_ETH_EGCR1_RXCINV (0x00001000)
+#define NS9750_ETH_EGCR1_TXCINV (0x00000800)
#define NS9750_ETH_EGCR1_RXALIGN (0x00000400)
-#define NS9750_ETH_EGCR1_MAC_HRST (0x00000200)
-#define NS9750_ETH_EGCR1_ITXA (0x00000100)
+#define NS9750_ETH_EGCR1_MAC_HRST (0x00000200)
+#define NS9750_ETH_EGCR1_ITXA (0x00000100)
#define NS9750_ETH_EGCR2_TPTV_MA (0xFFFF0000)
#define NS9750_ETH_EGCR2_TPCF (0x00000040)
@@ -116,10 +116,10 @@
#define NS9750_ETH_EGCR2_CLRCNT (0x00000002)
#define NS9750_ETH_EGCR2_STEN (0x00000001)
-#define NS9750_ETH_EGSR_RXINIT (0x00100000)
-#define NS9750_ETH_EGSR_TXFIFONF (0x00080000)
-#define NS9750_ETH_EGSR_TXFIFOH (0x00040000)
-#define NS9750_ETH_EGSR_TXFIFOE (0x00010000)
+#define NS9750_ETH_EGSR_RXINIT (0x00100000)
+#define NS9750_ETH_EGSR_TXFIFONF (0x00080000)
+#define NS9750_ETH_EGSR_TXFIFOH (0x00040000)
+#define NS9750_ETH_EGSR_TXFIFOE (0x00010000)
#define NS9750_ETH_FIFOTXS_ALL (0x00000055)
#define NS9750_ETH_FIFOTXS_3 (0x000000d5)
@@ -127,116 +127,116 @@
#define NS9750_ETH_FIFOTXS_1 (0x0000000D)
#define NS9750_ETH_FIFOTXS_0 (0x00000003)
-#define NS9750_ETH_ETSR_TXOK (0x00008000)
-#define NS9750_ETH_ETSR_TXBR (0x00004000)
-#define NS9750_ETH_ETSR_TXMC (0x00002000)
-#define NS9750_ETH_ETSR_TXAL (0x00001000)
-#define NS9750_ETH_ETSR_TXAED (0x00000800)
-#define NS9750_ETH_ETSR_TXAEC (0x00000400)
-#define NS9750_ETH_ETSR_TXAUR (0x00000200)
-#define NS9750_ETH_ETSR_TXAJ (0x00000100)
-#define NS9750_ETH_ETSR_TXDEF (0x00000040)
-#define NS9750_ETH_ETSR_TXCRC (0x00000020)
-#define NS9750_ETH_ETSR_TXCOLC (0x0000000F)
+#define NS9750_ETH_ETSR_TXOK (0x00008000)
+#define NS9750_ETH_ETSR_TXBR (0x00004000)
+#define NS9750_ETH_ETSR_TXMC (0x00002000)
+#define NS9750_ETH_ETSR_TXAL (0x00001000)
+#define NS9750_ETH_ETSR_TXAED (0x00000800)
+#define NS9750_ETH_ETSR_TXAEC (0x00000400)
+#define NS9750_ETH_ETSR_TXAUR (0x00000200)
+#define NS9750_ETH_ETSR_TXAJ (0x00000100)
+#define NS9750_ETH_ETSR_TXDEF (0x00000040)
+#define NS9750_ETH_ETSR_TXCRC (0x00000020)
+#define NS9750_ETH_ETSR_TXCOLC (0x0000000F)
#define NS9750_ETH_ERSR_RXSIZE_MA (0x0FFF0000)
-#define NS9750_ETH_ERSR_RXCE (0x00008000)
-#define NS9750_ETH_ERSR_RXDV (0x00004000)
-#define NS9750_ETH_ERSR_RXOK (0x00002000)
-#define NS9750_ETH_ERSR_RXBR (0x00001000)
-#define NS9750_ETH_ERSR_RXMC (0x00000800)
-#define NS9750_ETH_ERSR_RXCRC (0x00000400)
-#define NS9750_ETH_ERSR_RXDR (0x00000200)
-#define NS9750_ETH_ERSR_RXCV (0x00000100)
-#define NS9750_ETH_ERSR_RXSHT (0x00000040)
-
-#define NS9750_ETH_MAC1_SRST (0x00008000)
-#define NS9750_ETH_MAC1_SIMMRST (0x00004000)
-#define NS9750_ETH_MAC1_RPEMCSR (0x00000800)
-#define NS9750_ETH_MAC1_RPERFUN (0x00000400)
-#define NS9750_ETH_MAC1_RPEMCST (0x00000200)
-#define NS9750_ETH_MAC1_RPETFUN (0x00000100)
-#define NS9750_ETH_MAC1_LOOPBK (0x00000010)
-#define NS9750_ETH_MAC1_TXFLOW (0x00000008)
-#define NS9750_ETH_MAC1_RXFLOW (0x00000004)
-#define NS9750_ETH_MAC1_PALLRX (0x00000002)
-#define NS9750_ETH_MAC1_RXEN (0x00000001)
-
-#define NS9750_ETH_MAC2_EDEFER (0x00004000)
-#define NS9750_ETH_MAC2_BACKP (0x00002000)
-#define NS9750_ETH_MAC2_NOBO (0x00001000)
-#define NS9750_ETH_MAC2_LONGP (0x00000200)
-#define NS9750_ETH_MAC2_PUREP (0x00000100)
-#define NS9750_ETH_MAC2_AUTOP (0x00000080)
-#define NS9750_ETH_MAC2_VLANP (0x00000040)
-#define NS9750_ETH_MAC2_PADEN (0x00000020)
-#define NS9750_ETH_MAC2_CRCEN (0x00000010)
-#define NS9750_ETH_MAC2_DELCRC (0x00000008)
-#define NS9750_ETH_MAC2_HUGE (0x00000004)
-#define NS9750_ETH_MAC2_FLENC (0x00000002)
-#define NS9750_ETH_MAC2_FULLD (0x00000001)
-
-#define NS9750_ETH_IPGT_MA (0x0000007F)
-
-#define NS9750_ETH_IPGR_IPGR1 (0x00007F00)
-#define NS9750_ETH_IPGR_IPGR2 (0x0000007F)
-
-#define NS9750_ETH_CLRT_CWIN (0x00003F00)
-#define NS9750_ETH_CLRT_RETX (0x0000000F)
-
-#define NS9750_ETH_MAXF_MAXF (0x0000FFFF)
-
-#define NS9750_ETH_SUPP_RPERMII (0x00008000)
-#define NS9750_ETH_SUPP_SPEED (0x00000080)
-
-#define NS9750_ETH_TEST_TBACK (0x00000004)
-#define NS9750_ETH_TEST_TPAUSE (0x00000002)
-#define NS9750_ETH_TEST_SPQ (0x00000001)
-
-#define NS9750_ETH_MCFG_RMIIM (0x00008000)
-#define NS9750_ETH_MCFG_CLKS_MA (0x0000001C)
-#define NS9750_ETH_MCFG_CLKS_4 (0x00000004)
-#define NS9750_ETH_MCFG_CLKS_6 (0x00000008)
-#define NS9750_ETH_MCFG_CLKS_8 (0x0000000C)
-#define NS9750_ETH_MCFG_CLKS_10 (0x00000010)
-#define NS9750_ETH_MCFG_CLKS_20 (0x00000014)
-#define NS9750_ETH_MCFG_CLKS_30 (0x00000018)
-#define NS9750_ETH_MCFG_CLKS_40 (0x0000001C)
-#define NS9750_ETH_MCFG_SPRE (0x00000002)
-#define NS9750_ETH_MCFG_SCANI (0x00000001)
-
-#define NS9750_ETH_MCMD_SCAN (0x00000002)
-#define NS9750_ETH_MCMD_READ (0x00000001)
-
-#define NS9750_ETH_MADR_DADR_MA (0x00001F00)
-#define NS9750_ETH_MADR_RADR_MA (0x0000001F)
-
-#define NS9750_ETH_MWTD_MA (0x0000FFFF)
-
-#define NS9750_ETH_MRRD_MA (0x0000FFFF)
+#define NS9750_ETH_ERSR_RXCE (0x00008000)
+#define NS9750_ETH_ERSR_RXDV (0x00004000)
+#define NS9750_ETH_ERSR_RXOK (0x00002000)
+#define NS9750_ETH_ERSR_RXBR (0x00001000)
+#define NS9750_ETH_ERSR_RXMC (0x00000800)
+#define NS9750_ETH_ERSR_RXCRC (0x00000400)
+#define NS9750_ETH_ERSR_RXDR (0x00000200)
+#define NS9750_ETH_ERSR_RXCV (0x00000100)
+#define NS9750_ETH_ERSR_RXSHT (0x00000040)
+
+#define NS9750_ETH_MAC1_SRST (0x00008000)
+#define NS9750_ETH_MAC1_SIMMRST (0x00004000)
+#define NS9750_ETH_MAC1_RPEMCSR (0x00000800)
+#define NS9750_ETH_MAC1_RPERFUN (0x00000400)
+#define NS9750_ETH_MAC1_RPEMCST (0x00000200)
+#define NS9750_ETH_MAC1_RPETFUN (0x00000100)
+#define NS9750_ETH_MAC1_LOOPBK (0x00000010)
+#define NS9750_ETH_MAC1_TXFLOW (0x00000008)
+#define NS9750_ETH_MAC1_RXFLOW (0x00000004)
+#define NS9750_ETH_MAC1_PALLRX (0x00000002)
+#define NS9750_ETH_MAC1_RXEN (0x00000001)
+
+#define NS9750_ETH_MAC2_EDEFER (0x00004000)
+#define NS9750_ETH_MAC2_BACKP (0x00002000)
+#define NS9750_ETH_MAC2_NOBO (0x00001000)
+#define NS9750_ETH_MAC2_LONGP (0x00000200)
+#define NS9750_ETH_MAC2_PUREP (0x00000100)
+#define NS9750_ETH_MAC2_AUTOP (0x00000080)
+#define NS9750_ETH_MAC2_VLANP (0x00000040)
+#define NS9750_ETH_MAC2_PADEN (0x00000020)
+#define NS9750_ETH_MAC2_CRCEN (0x00000010)
+#define NS9750_ETH_MAC2_DELCRC (0x00000008)
+#define NS9750_ETH_MAC2_HUGE (0x00000004)
+#define NS9750_ETH_MAC2_FLENC (0x00000002)
+#define NS9750_ETH_MAC2_FULLD (0x00000001)
+
+#define NS9750_ETH_IPGT_MA (0x0000007F)
+
+#define NS9750_ETH_IPGR_IPGR1 (0x00007F00)
+#define NS9750_ETH_IPGR_IPGR2 (0x0000007F)
+
+#define NS9750_ETH_CLRT_CWIN (0x00003F00)
+#define NS9750_ETH_CLRT_RETX (0x0000000F)
+
+#define NS9750_ETH_MAXF_MAXF (0x0000FFFF)
+
+#define NS9750_ETH_SUPP_RPERMII (0x00008000)
+#define NS9750_ETH_SUPP_SPEED (0x00000080)
+
+#define NS9750_ETH_TEST_TBACK (0x00000004)
+#define NS9750_ETH_TEST_TPAUSE (0x00000002)
+#define NS9750_ETH_TEST_SPQ (0x00000001)
+
+#define NS9750_ETH_MCFG_RMIIM (0x00008000)
+#define NS9750_ETH_MCFG_CLKS_MA (0x0000001C)
+#define NS9750_ETH_MCFG_CLKS_4 (0x00000004)
+#define NS9750_ETH_MCFG_CLKS_6 (0x00000008)
+#define NS9750_ETH_MCFG_CLKS_8 (0x0000000C)
+#define NS9750_ETH_MCFG_CLKS_10 (0x00000010)
+#define NS9750_ETH_MCFG_CLKS_20 (0x00000014)
+#define NS9750_ETH_MCFG_CLKS_30 (0x00000018)
+#define NS9750_ETH_MCFG_CLKS_40 (0x0000001C)
+#define NS9750_ETH_MCFG_SPRE (0x00000002)
+#define NS9750_ETH_MCFG_SCANI (0x00000001)
+
+#define NS9750_ETH_MCMD_SCAN (0x00000002)
+#define NS9750_ETH_MCMD_READ (0x00000001)
+
+#define NS9750_ETH_MADR_DADR_MA (0x00001F00)
+#define NS9750_ETH_MADR_RADR_MA (0x0000001F)
+
+#define NS9750_ETH_MWTD_MA (0x0000FFFF)
+
+#define NS9750_ETH_MRRD_MA (0x0000FFFF)
#define NS9750_ETH_MIND_MIILF (0x00000008)
#define NS9750_ETH_MIND_NVALID (0x00000004)
-#define NS9750_ETH_MIND_SCAN (0x00000002)
-#define NS9750_ETH_MIND_BUSY (0x00000001)
+#define NS9750_ETH_MIND_SCAN (0x00000002)
+#define NS9750_ETH_MIND_BUSY (0x00000001)
-#define NS9750_ETH_SA1_OCTET1_MA (0x0000FF00)
-#define NS9750_ETH_SA1_OCTET2_MA (0x000000FF)
+#define NS9750_ETH_SA1_OCTET1_MA (0x0000FF00)
+#define NS9750_ETH_SA1_OCTET2_MA (0x000000FF)
-#define NS9750_ETH_SA2_OCTET3_MA (0x0000FF00)
-#define NS9750_ETH_SA2_OCTET4_MA (0x000000FF)
+#define NS9750_ETH_SA2_OCTET3_MA (0x0000FF00)
+#define NS9750_ETH_SA2_OCTET4_MA (0x000000FF)
-#define NS9750_ETH_SA3_OCTET5_MA (0x0000FF00)
-#define NS9750_ETH_SA3_OCTET6_MA (0x000000FF)
+#define NS9750_ETH_SA3_OCTET5_MA (0x0000FF00)
+#define NS9750_ETH_SA3_OCTET6_MA (0x000000FF)
-#define NS9750_ETH_SAFR_PRO (0x00000008)
-#define NS9750_ETH_SAFR_PRM (0x00000004)
-#define NS9750_ETH_SAFR_PRA (0x00000002)
-#define NS9750_ETH_SAFR_BROAD (0x00000001)
+#define NS9750_ETH_SAFR_PRO (0x00000008)
+#define NS9750_ETH_SAFR_PRM (0x00000004)
+#define NS9750_ETH_SAFR_PRA (0x00000002)
+#define NS9750_ETH_SAFR_BROAD (0x00000001)
-#define NS9750_ETH_HT1_MA (0x0000FFFF)
+#define NS9750_ETH_HT1_MA (0x0000FFFF)
-#define NS9750_ETH_HT2_MA (0x0000FFFF)
+#define NS9750_ETH_HT2_MA (0x0000FFFF)
/* also valid for EINTREN */
#define NS9750_ETH_EINTR_RXOVL_DATA (0x02000000)
@@ -254,7 +254,7 @@
#define NS9750_ETH_EINTR_TXBUFC (0x00000010)
#define NS9750_ETH_EINTR_TXBUFNR (0x00000008)
#define NS9750_ETH_EINTR_TXDONE (0x00000004)
-#define NS9750_ETH_EINTR_TXERR (0x00000002)
+#define NS9750_ETH_EINTR_TXERR (0x00000002)
#define NS9750_ETH_EINTR_TXIDLE (0x00000001)
#define NS9750_ETH_EINTR_RX_MA \
(NS9750_ETH_EINTR_RXOVL_DATA | \
@@ -289,7 +289,7 @@
#define NS9750_ETH_RXFREE_A (0x00000001)
#ifndef NS9750_ETH_PHY_ADDRESS
-# define NS9750_ETH_PHY_ADDRESS (0x0001) /* suitable for UNC20 */
+# define NS9750_ETH_PHY_ADDRESS (0x0001) /* suitable for UNC20 */
#endif /* NETARM_ETH_PHY_ADDRESS */
#endif /* CONFIG_DRIVER_NS9750_ETHERNET */
diff --git a/include/ns9750_mem.h b/include/ns9750_mem.h
index 44c8ddc..666e412 100644
--- a/include/ns9750_mem.h
+++ b/include/ns9750_mem.h
@@ -35,23 +35,23 @@
/* the register addresses */
-#define NS9750_MEM_CTRL (0x0000)
-#define NS9750_MEM_STATUS (0x0004)
-#define NS9750_MEM_CFG (0x0008)
-#define NS9750_MEM_DYN_CTRL (0x0020)
-#define NS9750_MEM_DYN_REFRESH (0x0024)
+#define NS9750_MEM_CTRL (0x0000)
+#define NS9750_MEM_STATUS (0x0004)
+#define NS9750_MEM_CFG (0x0008)
+#define NS9750_MEM_DYN_CTRL (0x0020)
+#define NS9750_MEM_DYN_REFRESH (0x0024)
#define NS9750_MEM_DYN_READ_CFG (0x0028)
-#define NS9750_MEM_DYN_TRP (0x0030)
-#define NS9750_MEM_DYN_TRAS (0x0034)
-#define NS9750_MEM_DYN_TSREX (0x0038)
-#define NS9750_MEM_DYN_TAPR (0x003C)
-#define NS9750_MEM_DYN_TDAL (0x0040)
-#define NS9750_MEM_DYN_TWR (0x0044)
-#define NS9750_MEM_DYN_TRC (0x0048)
-#define NS9750_MEM_DYN_TRFC (0x004C)
-#define NS9750_MEM_DYN_TXSR (0x0050)
-#define NS9750_MEM_DYN_TRRD (0x0054)
-#define NS9750_MEM_DYN_TMRD (0x0058)
+#define NS9750_MEM_DYN_TRP (0x0030)
+#define NS9750_MEM_DYN_TRAS (0x0034)
+#define NS9750_MEM_DYN_TSREX (0x0038)
+#define NS9750_MEM_DYN_TAPR (0x003C)
+#define NS9750_MEM_DYN_TDAL (0x0040)
+#define NS9750_MEM_DYN_TWR (0x0044)
+#define NS9750_MEM_DYN_TRC (0x0048)
+#define NS9750_MEM_DYN_TRFC (0x004C)
+#define NS9750_MEM_DYN_TXSR (0x0050)
+#define NS9750_MEM_DYN_TRRD (0x0054)
+#define NS9750_MEM_DYN_TMRD (0x0058)
#define NS9750_MEM_STAT_EXT_WAIT (0x0080)
#define NS9750_MEM_DYN_CFG_BASE (0x0100)
#define NS9750_MEM_DYN_RAS_CAS_BASE (0x0104)
@@ -102,7 +102,7 @@
#define NS9750_MEM_DYN_REFRESH_MA (0x000007FF)
#define NS9750_MEM_DYN_READ_CFG_MA (0x00000003)
-#define NS9750_MEM_DYN_READ_CFG_DELAY0 (0x00000001)
+#define NS9750_MEM_DYN_READ_CFG_DELAY0 (0x00000001)
#define NS9750_MEM_DYN_READ_CFG_DELAY1 (0x00000002)
#define NS9750_MEM_DYN_READ_CFG_DELAY2 (0x00000003)
@@ -137,13 +137,13 @@
#define NS9750_MEM_DYN_CFG_MD (0x00000018)
#define NS9750_MEM_DYN_RAS_CAS_CAS_MA (0x00000300)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_1 (0x00000100)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_2 (0x00000200)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_3 (0x00000300)
+#define NS9750_MEM_DYN_RAS_CAS_CAS_1 (0x00000100)
+#define NS9750_MEM_DYN_RAS_CAS_CAS_2 (0x00000200)
+#define NS9750_MEM_DYN_RAS_CAS_CAS_3 (0x00000300)
#define NS9750_MEM_DYN_RAS_CAS_RAS_MA (0x00000003)
#define NS9750_MEM_DYN_RAS_CAS_RAS_1 (0x00000001)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_2 (0x00000002)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_3 (0x00000003)
+#define NS9750_MEM_DYN_RAS_CAS_RAS_2 (0x00000002)
+#define NS9750_MEM_DYN_RAS_CAS_RAS_3 (0x00000003)
#define NS9750_MEM_STAT_CFG_PSMC (0x00100000)
#define NS9750_MEM_STAT_CFG_BSMC (0x00080000)
@@ -153,7 +153,7 @@
#define NS9750_MEM_STAT_CFG_PM (0x00000008)
#define NS9750_MEM_STAT_CFG_MW_MA (0x00000003)
#define NS9750_MEM_STAT_CFG_MW_8 (0x00000000)
-#define NS9750_MEM_STAT_CFG_MW_16 (0x00000001)
+#define NS9750_MEM_STAT_CFG_MW_16 (0x00000001)
#define NS9750_MEM_STAT_CFG_MW_32 (0x00000002)
#define NS9750_MEM_STAT_WAIT_WEN_MA (0x0000000F)
diff --git a/include/ns9750_ser.h b/include/ns9750_ser.h
index e6ff3e1..b5c297e 100644
--- a/include/ns9750_ser.h
+++ b/include/ns9750_ser.h
@@ -75,7 +75,7 @@
#define NS9750_SER_CTRL_A_ERXDMA (0x00000100)
#define NS9750_SER_CTRL_A_RIC_MA (0x000000E0)
#define NS9750_SER_CTRL_A_TIC_MA (0x0000001E)
-#define NS9750_SER_CTRL_A_ETXDMA (0x00000001)
+#define NS9750_SER_CTRL_A_ETXDMA (0x00000001)
/* control B register */
@@ -130,21 +130,21 @@
#define NS9750_SER_STAT_A_TEMPTY (0x00000001)
#define NS9750_SER_STAT_A_RX_COND_ERR ( NS9750_SER_STAT_A_RFE | \
- NS9750_SER_STAT_A_ROVER | \
+ NS9750_SER_STAT_A_ROVER | \
NS9750_SER_STAT_A_RPE )
#define NS9750_SER_STAT_A_RX_COND_ALL ( NS9750_SER_STAT_A_RX_COND_ERR | \
NS9750_SER_STAT_A_RBRK | \
NS9750_SER_STAT_A_RRDY | \
- NS9750_SER_STAT_A_RHALF | \
- NS9750_SER_STAT_A_RBC | \
- NS9750_SER_STAT_A_DCDI | \
- NS9750_SER_STAT_A_RII | \
- NS9750_SER_STAT_A_DSRI | \
- NS9750_SER_STAT_A_CTSI )
+ NS9750_SER_STAT_A_RHALF | \
+ NS9750_SER_STAT_A_RBC | \
+ NS9750_SER_STAT_A_DCDI | \
+ NS9750_SER_STAT_A_RII | \
+ NS9750_SER_STAT_A_DSRI | \
+ NS9750_SER_STAT_A_CTSI )
#define NS9750_SER_STAT_A_TX_COND_ALL ( NS9750_SER_STAT_A_TRDY | \
NS9750_SER_STAT_A_THALF | \
NS9750_SER_STAT_A_TBC | \
- NS9750_SER_STAT_A_TEMPTY )
+ NS9750_SER_STAT_A_TEMPTY )
/* bit rate register */
#define NS9750_SER_BITRATE_EBIT (0x80000000)
@@ -161,13 +161,13 @@
#define NS9750_SER_BITRATE_TXCINV (0x00800000)
#define NS9750_SER_BITRATE_RXCINV (0x00400000)
#define NS9750_SER_BITRATE_TCDR_MA (0x00180000)
-#define NS9750_SER_BITRATE_TCDR_1 (0x00000000)
-#define NS9750_SER_BITRATE_TCDR_8 (0x00080000)
+#define NS9750_SER_BITRATE_TCDR_1 (0x00000000)
+#define NS9750_SER_BITRATE_TCDR_8 (0x00080000)
#define NS9750_SER_BITRATE_TCDR_16 (0x00100000)
#define NS9750_SER_BITRATE_TCDR_32 (0x00180000)
#define NS9750_SER_BITRATE_RCDR_MA (0x00070000)
-#define NS9750_SER_BITRATE_RCDR_1 (0x00000000)
-#define NS9750_SER_BITRATE_RCDR_8 (0x00020000)
+#define NS9750_SER_BITRATE_RCDR_1 (0x00000000)
+#define NS9750_SER_BITRATE_RCDR_8 (0x00020000)
#define NS9750_SER_BITRATE_RCDR_16 (0x00040000)
#define NS9750_SER_BITRATE_RCDR_32 (0x00060000)
#define NS9750_SER_BITRATE_TICS (0x00010000)
diff --git a/include/ns9750_sys.h b/include/ns9750_sys.h
index c563cad..f1dc2b2 100644
--- a/include/ns9750_sys.h
+++ b/include/ns9750_sys.h
@@ -38,9 +38,9 @@
#define NS9750_SYS_AHB_GEN (0x0000)
#define NS9750_SYS_BRC_BASE (0x0004)
#define NS9750_SYS_AHB_TIMEOUT (0x0014)
-#define NS9750_SYS_AHB_ERROR1 (0x0018)
-#define NS9750_SYS_AHB_ERROR2 (0x001C)
-#define NS9750_SYS_AHB_MON (0x0020)
+#define NS9750_SYS_AHB_ERROR1 (0x0018)
+#define NS9750_SYS_AHB_ERROR2 (0x001C)
+#define NS9750_SYS_AHB_MON (0x0020)
#define NS9750_SYS_TIMER_COUNT_BASE (0x0044)
#define NS9750_SYS_TIMER_READ_BASE (0x0084)
#define NS9750_SYS_INT_VEC_ADR_BASE (0x00C4)
@@ -120,27 +120,27 @@
/* need to be n*8bit to Int Level */
#define NS9750_SYS_INT_CFG_IE (0x00000080)
-#define NS9750_SYS_INT_CFG_IT (0x00000020)
+#define NS9750_SYS_INT_CFG_IT (0x00000020)
#define NS9750_SYS_INT_CFG_IAD_MA (0x0000001F)
-#define NS9750_SYS_TIMER_INT_STAT_MA (0x0000FFFF)
+#define NS9750_SYS_TIMER_INT_STAT_MA (0x0000FFFF)
#define NS9750_SYS_SW_WDOG_CFG_SWWE (0x00000080)
#define NS9750_SYS_SW_WDOG_CFG_SWWI (0x00000020)
#define NS9750_SYS_SW_WDOG_CFG_SWWIC (0x00000010)
#define NS9750_SYS_SW_WDOG_CFG_SWTCS_MA (0x00000007)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_2 (0x00000000)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_4 (0x00000001)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_8 (0x00000002)
+#define NS9750_SYS_SW_WDOG_CFG_SWTCS_2 (0x00000000)
+#define NS9750_SYS_SW_WDOG_CFG_SWTCS_4 (0x00000001)
+#define NS9750_SYS_SW_WDOG_CFG_SWTCS_8 (0x00000002)
#define NS9750_SYS_SW_WDOG_CFG_SWTCS_16 (0x00000003)
#define NS9750_SYS_SW_WDOG_CFG_SWTCS_32 (0x00000004)
#define NS9750_SYS_SW_WDOG_CFG_SWTCS_64 (0x00000005)
#define NS9750_SYS_CLOCK_LPCS_MA (0x00000380)
-#define NS9750_SYS_CLOCK_LPCS_1 (0x00000000)
-#define NS9750_SYS_CLOCK_LPCS_2 (0x00000080)
-#define NS9750_SYS_CLOCK_LPCS_4 (0x00000100)
-#define NS9750_SYS_CLOCK_LPCS_8 (0x00000180)
+#define NS9750_SYS_CLOCK_LPCS_1 (0x00000000)
+#define NS9750_SYS_CLOCK_LPCS_2 (0x00000080)
+#define NS9750_SYS_CLOCK_LPCS_4 (0x00000100)
+#define NS9750_SYS_CLOCK_LPCS_8 (0x00000180)
#define NS9750_SYS_CLOCK_LPCS_EXT (0x00000200)
#define NS9750_SYS_CLOCK_BBC (0x00000040)
#define NS9750_SYS_CLOCK_LCC (0x00000020)
@@ -185,22 +185,22 @@
#define NS9750_SYS_PLL_CPCC_MA (0x00000060)
#define NS9750_SYS_PLL_NDSW_MA (0x0000001F)
-#define NS9750_SYS_ACT_INT_STAT_MA (0x0000FFFF)
+#define NS9750_SYS_ACT_INT_STAT_MA (0x0000FFFF)
#define NS9750_SYS_TIMER_CTRL_TEN (0x00008000)
#define NS9750_SYS_TIMER_CTRL_INTC (0x00000200)
#define NS9750_SYS_TIMER_CTRL_TLCS_MA (0x000001C0)
-#define NS9750_SYS_TIMER_CTRL_TLCS_1 (0x00000000)
-#define NS9750_SYS_TIMER_CTRL_TLCS_2 (0x00000040)
-#define NS9750_SYS_TIMER_CTRL_TLCS_4 (0x00000080)
-#define NS9750_SYS_TIMER_CTRL_TLCS_8 (0x000000C0)
+#define NS9750_SYS_TIMER_CTRL_TLCS_1 (0x00000000)
+#define NS9750_SYS_TIMER_CTRL_TLCS_2 (0x00000040)
+#define NS9750_SYS_TIMER_CTRL_TLCS_4 (0x00000080)
+#define NS9750_SYS_TIMER_CTRL_TLCS_8 (0x000000C0)
#define NS9750_SYS_TIMER_CTRL_TLCS_16 (0x00000100)
#define NS9750_SYS_TIMER_CTRL_TLCS_32 (0x00000140)
#define NS9750_SYS_TIMER_CTRL_TLCS_64 (0x00000180)
#define NS9750_SYS_TIMER_CTRL_TLCS_EXT (0x000001C0)
#define NS9750_SYS_TIMER_CTRL_TM_MA (0x00000030)
-#define NS9750_SYS_TIMER_CTRL_TM_INT (0x00000000)
-#define NS9750_SYS_TIMER_CTRL_TM_LOW (0x00000010)
+#define NS9750_SYS_TIMER_CTRL_TM_INT (0x00000000)
+#define NS9750_SYS_TIMER_CTRL_TM_LOW (0x00000010)
#define NS9750_SYS_TIMER_CTRL_TM_HIGH (0x00000020)
#define NS9750_SYS_TIMER_CTRL_INTS (0x00000008)
#define NS9750_SYS_TIMER_CTRL_UDS (0x00000004)
diff --git a/include/pc_keyb.h b/include/pc_keyb.h
index ab51703..5ba99e3 100644
--- a/include/pc_keyb.h
+++ b/include/pc_keyb.h
@@ -68,14 +68,14 @@ extern unsigned char aux_device_present;
/*
* Status Register Bits
*/
-#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
-#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
+#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
+#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
-#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
-#define KBD_STAT_PERR 0x80 /* Parity error */
+#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
+#define KBD_STAT_PERR 0x80 /* Parity error */
#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
@@ -84,11 +84,11 @@ extern unsigned char aux_device_present;
*/
#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
-#define KBD_MODE_SYS 0x04 /* The system flag (?) */
+#define KBD_MODE_SYS 0x04 /* The system flag (?) */
#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */
-#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
+#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
#define KBD_MODE_RFU 0x80
/*
diff --git a/include/ppc405.h b/include/ppc405.h
index 37b121c..d953378 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -1,22 +1,22 @@
/*----------------------------------------------------------------------------+
|
-| This source code has been made available to you by IBM on an AS-IS
-| basis. Anyone receiving this source is licensed under IBM
-| copyrights to use it in any way he or she deems fit, including
-| copying it, modifying it, compiling it, and redistributing it either
-| with or without modifications. No license under IBM patents or
-| patent applications is to be implied by the copyright license.
+| This source code has been made available to you by IBM on an AS-IS
+| basis. Anyone receiving this source is licensed under IBM
+| copyrights to use it in any way he or she deems fit, including
+| copying it, modifying it, compiling it, and redistributing it either
+| with or without modifications. No license under IBM patents or
+| patent applications is to be implied by the copyright license.
|
-| Any user of this software should understand that IBM cannot provide
-| technical support for this software and will not be responsible for
-| any consequences resulting from the use of this software.
+| Any user of this software should understand that IBM cannot provide
+| technical support for this software and will not be responsible for
+| any consequences resulting from the use of this software.
|
-| Any person who transfers this source code or any derivative work
-| must include the IBM copyright notice, this paragraph, and the
-| preceding two paragraphs in the transferred software.
+| Any person who transfers this source code or any derivative work
+| must include the IBM copyright notice, this paragraph, and the
+| preceding two paragraphs in the transferred software.
|
-| COPYRIGHT I B M CORPORATION 1999
-| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+| COPYRIGHT I B M CORPORATION 1999
+| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+----------------------------------------------------------------------------*/
#ifndef __PPC405_H__
@@ -31,8 +31,8 @@
/*--------------------------------------------------------------------- */
/* Special Purpose Registers */
/*--------------------------------------------------------------------- */
- #define srr2 0x3de /* save/restore register 2 */
- #define srr3 0x3df /* save/restore register 3 */
+ #define srr2 0x3de /* save/restore register 2 */
+ #define srr3 0x3df /* save/restore register 3 */
/*
* 405 does not really have CSRR0/1 but SRR2/3 are used during critical
@@ -42,46 +42,46 @@
#define csrr0 srr2
#define csrr1 srr3
- #define dbsr 0x3f0 /* debug status register */
- #define dbcr0 0x3f2 /* debug control register 0 */
- #define dbcr1 0x3bd /* debug control register 1 */
- #define iac1 0x3f4 /* instruction address comparator 1 */
- #define iac2 0x3f5 /* instruction address comparator 2 */
- #define iac3 0x3b4 /* instruction address comparator 3 */
- #define iac4 0x3b5 /* instruction address comparator 4 */
- #define dac1 0x3f6 /* data address comparator 1 */
- #define dac2 0x3f7 /* data address comparator 2 */
- #define dccr 0x3fa /* data cache control register */
- #define iccr 0x3fb /* instruction cache control register */
- #define esr 0x3d4 /* execption syndrome register */
- #define dear 0x3d5 /* data exeption address register */
- #define evpr 0x3d6 /* exeption vector prefix register */
- #define tsr 0x3d8 /* timer status register */
- #define tcr 0x3da /* timer control register */
- #define pit 0x3db /* programmable interval timer */
- #define sgr 0x3b9 /* storage guarded reg */
- #define dcwr 0x3ba /* data cache write-thru reg*/
- #define sler 0x3bb /* storage little-endian reg */
- #define cdbcr 0x3d7 /* cache debug cntrl reg */
- #define icdbdr 0x3d3 /* instr cache dbug data reg*/
- #define ccr0 0x3b3 /* core configuration register */
- #define dvc1 0x3b6 /* data value compare register 1 */
- #define dvc2 0x3b7 /* data value compare register 2 */
- #define pid 0x3b1 /* process ID */
- #define su0r 0x3bc /* storage user-defined register 0 */
- #define zpr 0x3b0 /* zone protection regsiter */
-
- #define tbl 0x11c /* time base lower - privileged write */
- #define tbu 0x11d /* time base upper - privileged write */
-
- #define sprg4r 0x104 /* Special purpose general 4 - read only */
- #define sprg5r 0x105 /* Special purpose general 5 - read only */
- #define sprg6r 0x106 /* Special purpose general 6 - read only */
- #define sprg7r 0x107 /* Special purpose general 7 - read only */
- #define sprg4w 0x114 /* Special purpose general 4 - write only */
- #define sprg5w 0x115 /* Special purpose general 5 - write only */
- #define sprg6w 0x116 /* Special purpose general 6 - write only */
- #define sprg7w 0x117 /* Special purpose general 7 - write only */
+ #define dbsr 0x3f0 /* debug status register */
+ #define dbcr0 0x3f2 /* debug control register 0 */
+ #define dbcr1 0x3bd /* debug control register 1 */
+ #define iac1 0x3f4 /* instruction address comparator 1 */
+ #define iac2 0x3f5 /* instruction address comparator 2 */
+ #define iac3 0x3b4 /* instruction address comparator 3 */
+ #define iac4 0x3b5 /* instruction address comparator 4 */
+ #define dac1 0x3f6 /* data address comparator 1 */
+ #define dac2 0x3f7 /* data address comparator 2 */
+ #define dccr 0x3fa /* data cache control register */
+ #define iccr 0x3fb /* instruction cache control register */
+ #define esr 0x3d4 /* execption syndrome register */
+ #define dear 0x3d5 /* data exeption address register */
+ #define evpr 0x3d6 /* exeption vector prefix register */
+ #define tsr 0x3d8 /* timer status register */
+ #define tcr 0x3da /* timer control register */
+ #define pit 0x3db /* programmable interval timer */
+ #define sgr 0x3b9 /* storage guarded reg */
+ #define dcwr 0x3ba /* data cache write-thru reg*/
+ #define sler 0x3bb /* storage little-endian reg */
+ #define cdbcr 0x3d7 /* cache debug cntrl reg */
+ #define icdbdr 0x3d3 /* instr cache dbug data reg*/
+ #define ccr0 0x3b3 /* core configuration register */
+ #define dvc1 0x3b6 /* data value compare register 1 */
+ #define dvc2 0x3b7 /* data value compare register 2 */
+ #define pid 0x3b1 /* process ID */
+ #define su0r 0x3bc /* storage user-defined register 0 */
+ #define zpr 0x3b0 /* zone protection regsiter */
+
+ #define tbl 0x11c /* time base lower - privileged write */
+ #define tbu 0x11d /* time base upper - privileged write */
+
+ #define sprg4r 0x104 /* Special purpose general 4 - read only */
+ #define sprg5r 0x105 /* Special purpose general 5 - read only */
+ #define sprg6r 0x106 /* Special purpose general 6 - read only */
+ #define sprg7r 0x107 /* Special purpose general 7 - read only */
+ #define sprg4w 0x114 /* Special purpose general 4 - write only */
+ #define sprg5w 0x115 /* Special purpose general 5 - write only */
+ #define sprg6w 0x116 /* Special purpose general 6 - write only */
+ #define sprg7w 0x117 /* Special purpose general 7 - write only */
/******************************************************************************
* Special for PPC405GP
@@ -91,29 +91,29 @@
* DMA
******************************************************************************/
#define DMA_DCR_BASE 0x100
-#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
-#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
-#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */
-#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */
-#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */
-#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
-#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
-#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */
-#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */
-#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */
-#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
-#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
-#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */
-#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */
-#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */
-#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */
-#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */
-#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */
-#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */
-#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */
-#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
-#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
-#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */
+#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
+#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
+#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */
+#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */
+#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */
+#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
+#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
+#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */
+#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */
+#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */
+#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
+#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
+#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */
+#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */
+#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */
+#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */
+#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */
+#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */
+#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */
+#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */
+#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
+#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
+#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */
/******************************************************************************
* Universal interrupt controller
@@ -129,49 +129,49 @@
#define UIC_DCR_BASE 0xc0
#define UIC0_DCR_BASE UIC_DCR_BASE
-#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */
-#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */
-#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */
-#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */
-#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */
-#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */
-#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */
-#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */
-#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */
+#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */
+#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */
+#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */
+#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */
+#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */
+#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */
+#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */
+#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */
+#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */
#if defined(CONFIG_405EX)
-#define uic0sr uicsr /* UIC status */
-#define uic0srs uicsrs /* UIC status set */
-#define uic0er uicer /* UIC enable */
-#define uic0cr uiccr /* UIC critical */
-#define uic0pr uicpr /* UIC polarity */
-#define uic0tr uictr /* UIC triggering */
-#define uic0msr uicmsr /* UIC masked status */
-#define uic0vr uicvr /* UIC vector */
+#define uic0sr uicsr /* UIC status */
+#define uic0srs uicsrs /* UIC status set */
+#define uic0er uicer /* UIC enable */
+#define uic0cr uiccr /* UIC critical */
+#define uic0pr uicpr /* UIC polarity */
+#define uic0tr uictr /* UIC triggering */
+#define uic0msr uicmsr /* UIC masked status */
+#define uic0vr uicvr /* UIC vector */
#define uic0vcr uicvcr /* UIC vector configuration*/
#define UIC_DCR_BASE1 0xd0
#define UIC1_DCR_BASE 0xd0
-#define uic1sr (UIC_DCR_BASE1+0x0) /* UIC status */
-#define uic1srs (UIC_DCR_BASE1+0x1) /* UIC status set */
-#define uic1er (UIC_DCR_BASE1+0x2) /* UIC enable */
-#define uic1cr (UIC_DCR_BASE1+0x3) /* UIC critical */
-#define uic1pr (UIC_DCR_BASE1+0x4) /* UIC polarity */
-#define uic1tr (UIC_DCR_BASE1+0x5) /* UIC triggering */
+#define uic1sr (UIC_DCR_BASE1+0x0) /* UIC status */
+#define uic1srs (UIC_DCR_BASE1+0x1) /* UIC status set */
+#define uic1er (UIC_DCR_BASE1+0x2) /* UIC enable */
+#define uic1cr (UIC_DCR_BASE1+0x3) /* UIC critical */
+#define uic1pr (UIC_DCR_BASE1+0x4) /* UIC polarity */
+#define uic1tr (UIC_DCR_BASE1+0x5) /* UIC triggering */
#define uic1msr (UIC_DCR_BASE1+0x6) /* UIC masked status */
-#define uic1vr (UIC_DCR_BASE1+0x7) /* UIC vector */
+#define uic1vr (UIC_DCR_BASE1+0x7) /* UIC vector */
#define uic1vcr (UIC_DCR_BASE1+0x8) /* UIC vector configuration*/
#define UIC_DCR_BASE2 0xe0
#define UIC2_DCR_BASE 0xe0
-#define uic2sr (UIC_DCR_BASE2+0x0) /* UIC status */
-#define uic2srs (UIC_DCR_BASE2+0x1) /* UIC status set */
-#define uic2er (UIC_DCR_BASE2+0x2) /* UIC enable */
-#define uic2cr (UIC_DCR_BASE2+0x3) /* UIC critical */
-#define uic2pr (UIC_DCR_BASE2+0x4) /* UIC polarity */
-#define uic2tr (UIC_DCR_BASE2+0x5) /* UIC triggering */
+#define uic2sr (UIC_DCR_BASE2+0x0) /* UIC status */
+#define uic2srs (UIC_DCR_BASE2+0x1) /* UIC status set */
+#define uic2er (UIC_DCR_BASE2+0x2) /* UIC enable */
+#define uic2cr (UIC_DCR_BASE2+0x3) /* UIC critical */
+#define uic2pr (UIC_DCR_BASE2+0x4) /* UIC polarity */
+#define uic2tr (UIC_DCR_BASE2+0x5) /* UIC triggering */
#define uic2msr (UIC_DCR_BASE2+0x6) /* UIC masked status */
-#define uic2vr (UIC_DCR_BASE2+0x7) /* UIC vector */
+#define uic2vr (UIC_DCR_BASE2+0x7) /* UIC vector */
#define uic2vcr (UIC_DCR_BASE2+0x8) /* UIC vector configuration*/
#endif
@@ -221,145 +221,145 @@
#elif defined(CONFIG_405EX)
/* UIC 0 */
-#define UIC_U0 0x80000000 /* */
-#define UIC_U1 0x40000000 /* */
-#define UIC_IIC0 0x20000000 /* */
-#define UIC_PKA 0x10000000 /* */
-#define UIC_TRNG 0x08000000 /* */
-#define UIC_EBM 0x04000000 /* */
-#define UIC_BGI 0x02000000 /* */
-#define UIC_IIC1 0x01000000 /* */
-#define UIC_SPI 0x00800000 /* */
-#define UIC_EIRQ0 0x00400000 /**/
-#define UIC_MTE 0x00200000 /*MAL Tx EOB */
-#define UIC_MRE 0x00100000 /*MAL Rx EOB */
-#define UIC_DMA0 0x00080000 /* */
-#define UIC_DMA1 0x00040000 /* */
-#define UIC_DMA2 0x00020000 /* */
-#define UIC_DMA3 0x00010000 /* */
-#define UIC_PCIE0AL 0x00008000 /* */
-#define UIC_PCIE0VPD 0x00004000 /* */
-#define UIC_RPCIE0HRST 0x00002000 /* */
-#define UIC_FPCIE0HRST 0x00001000 /* */
-#define UIC_PCIE0TCR 0x00000800 /* */
-#define UIC_PCIEMSI0 0x00000400 /* */
-#define UIC_PCIEMSI1 0x00000200 /* */
-#define UIC_SECURITY 0x00000100 /* */
-#define UIC_ENET 0x00000080 /* */
-#define UIC_ENET1 0x00000040 /* */
-#define UIC_PCIEMSI2 0x00000020 /* */
-#define UIC_EIRQ4 0x00000010 /**/
-#define UICB0_UIC2NCI 0x00000008 /* */
-#define UICB0_UIC2CI 0x00000004 /* */
-#define UICB0_UIC1NCI 0x00000002 /* */
-#define UICB0_UIC1CI 0x00000001 /* */
+#define UIC_U0 0x80000000 /* */
+#define UIC_U1 0x40000000 /* */
+#define UIC_IIC0 0x20000000 /* */
+#define UIC_PKA 0x10000000 /* */
+#define UIC_TRNG 0x08000000 /* */
+#define UIC_EBM 0x04000000 /* */
+#define UIC_BGI 0x02000000 /* */
+#define UIC_IIC1 0x01000000 /* */
+#define UIC_SPI 0x00800000 /* */
+#define UIC_EIRQ0 0x00400000 /**/
+#define UIC_MTE 0x00200000 /*MAL Tx EOB */
+#define UIC_MRE 0x00100000 /*MAL Rx EOB */
+#define UIC_DMA0 0x00080000 /* */
+#define UIC_DMA1 0x00040000 /* */
+#define UIC_DMA2 0x00020000 /* */
+#define UIC_DMA3 0x00010000 /* */
+#define UIC_PCIE0AL 0x00008000 /* */
+#define UIC_PCIE0VPD 0x00004000 /* */
+#define UIC_RPCIE0HRST 0x00002000 /* */
+#define UIC_FPCIE0HRST 0x00001000 /* */
+#define UIC_PCIE0TCR 0x00000800 /* */
+#define UIC_PCIEMSI0 0x00000400 /* */
+#define UIC_PCIEMSI1 0x00000200 /* */
+#define UIC_SECURITY 0x00000100 /* */
+#define UIC_ENET 0x00000080 /* */
+#define UIC_ENET1 0x00000040 /* */
+#define UIC_PCIEMSI2 0x00000020 /* */
+#define UIC_EIRQ4 0x00000010 /**/
+#define UICB0_UIC2NCI 0x00000008 /* */
+#define UICB0_UIC2CI 0x00000004 /* */
+#define UICB0_UIC1NCI 0x00000002 /* */
+#define UICB0_UIC1CI 0x00000001 /* */
#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
UICB0_UIC1CI | UICB0_UIC2NCI)
-#define UIC_MAL_TXEOB UIC_MTE/* MAL TXEOB */
-#define UIC_MAL_RXEOB UIC_MRE/* MAL RXEOB */
+#define UIC_MAL_TXEOB UIC_MTE/* MAL TXEOB */
+#define UIC_MAL_RXEOB UIC_MRE/* MAL RXEOB */
/* UIC 1 */
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_PCIE0BMVC0 0x10000000 /* */
-#define UIC_PCIE0DCRERR 0x08000000 /* */
-#define UIC_EBC 0x04000000 /* */
-#define UIC_NDFC 0x02000000 /* */
-#define UIC_PCEI1DCRERR 0x01000000 /* */
-#define UIC_GPTCMPT8 0x00800000 /* */
-#define UIC_GPTCMPT9 0x00400000 /* */
-#define UIC_PCIE1AL 0x00200000 /* */
-#define UIC_PCIE1VPD 0x00100000 /* */
-#define UIC_RPCE1HRST 0x00080000 /* */
-#define UIC_FPCE1HRST 0x00040000 /* */
-#define UIC_PCIE1TCR 0x00020000 /* */
-#define UIC_PCIE1VC0 0x00010000 /* */
-#define UIC_GPTCMPT3 0x00008000 /* */
-#define UIC_GPTCMPT4 0x00004000 /* */
-#define UIC_EIRQ7 0x00002000 /* */
-#define UIC_EIRQ8 0x00001000 /* */
-#define UIC_EIRQ9 0x00000800 /* */
-#define UIC_GPTCMP5 0x00000400 /* */
-#define UIC_GPTCMP6 0x00000200 /* */
-#define UIC_GPTCMP7 0x00000100 /* */
-#define UIC_SROM 0x00000080 /* SERIAL ROM*/
-#define UIC_GPTDECPULS 0x00000040 /* GPT Decrement pulse*/
-#define UIC_EIRQ2 0x00000020 /* */
-#define UIC_EIRQ5 0x00000010 /* */
-#define UIC_EIRQ6 0x00000008 /* */
-#define UIC_EMAC0WAKE 0x00000004 /* */
-#define UIC_EIRQ1 0x00000002 /* */
-#define UIC_EMAC1WAKE 0x00000001 /* */
-#define UIC_MAL_SERR UIC_MS /* MAL SERR */
-#define UIC_MAL_TXDE UIC_MTDE /* MAL TXDE */
-#define UIC_MAL_RXDE UIC_MRDE /* MAL RXDE */
+#define UIC_MS 0x80000000 /* MAL SERR */
+#define UIC_MTDE 0x40000000 /* MAL TXDE */
+#define UIC_MRDE 0x20000000 /* MAL RXDE */
+#define UIC_PCIE0BMVC0 0x10000000 /* */
+#define UIC_PCIE0DCRERR 0x08000000 /* */
+#define UIC_EBC 0x04000000 /* */
+#define UIC_NDFC 0x02000000 /* */
+#define UIC_PCEI1DCRERR 0x01000000 /* */
+#define UIC_GPTCMPT8 0x00800000 /* */
+#define UIC_GPTCMPT9 0x00400000 /* */
+#define UIC_PCIE1AL 0x00200000 /* */
+#define UIC_PCIE1VPD 0x00100000 /* */
+#define UIC_RPCE1HRST 0x00080000 /* */
+#define UIC_FPCE1HRST 0x00040000 /* */
+#define UIC_PCIE1TCR 0x00020000 /* */
+#define UIC_PCIE1VC0 0x00010000 /* */
+#define UIC_GPTCMPT3 0x00008000 /* */
+#define UIC_GPTCMPT4 0x00004000 /* */
+#define UIC_EIRQ7 0x00002000 /* */
+#define UIC_EIRQ8 0x00001000 /* */
+#define UIC_EIRQ9 0x00000800 /* */
+#define UIC_GPTCMP5 0x00000400 /* */
+#define UIC_GPTCMP6 0x00000200 /* */
+#define UIC_GPTCMP7 0x00000100 /* */
+#define UIC_SROM 0x00000080 /* SERIAL ROM*/
+#define UIC_GPTDECPULS 0x00000040 /* GPT Decrement pulse*/
+#define UIC_EIRQ2 0x00000020 /* */
+#define UIC_EIRQ5 0x00000010 /* */
+#define UIC_EIRQ6 0x00000008 /* */
+#define UIC_EMAC0WAKE 0x00000004 /* */
+#define UIC_EIRQ1 0x00000002 /* */
+#define UIC_EMAC1WAKE 0x00000001 /* */
+#define UIC_MAL_SERR UIC_MS /* MAL SERR */
+#define UIC_MAL_TXDE UIC_MTDE /* MAL TXDE */
+#define UIC_MAL_RXDE UIC_MRDE /* MAL RXDE */
/* UIC 2 */
-#define UIC_PCIE0INTA 0x80000000 /* PCIE0 INTA*/
-#define UIC_PCIE0INTB 0x40000000 /* PCIE0 INTB*/
-#define UIC_PCIE0INTC 0x20000000 /* PCIE0 INTC*/
-#define UIC_PCIE0INTD 0x10000000 /* PCIE0 INTD*/
-#define UIC_EIRQ3 0x08000000 /* External IRQ 3*/
-#define UIC_DDRMCUE 0x04000000 /* */
-#define UIC_DDRMCCE 0x02000000 /* */
-#define UIC_MALINTCOATX0 0x01000000 /* Interrupt coalecence TX0*/
-#define UIC_MALINTCOATX1 0x00800000 /* Interrupt coalecence TX1*/
-#define UIC_MALINTCOARX0 0x00400000 /* Interrupt coalecence RX0*/
-#define UIC_MALINTCOARX1 0x00200000 /* Interrupt coalecence RX1*/
-#define UIC_PCIE1INTA 0x00100000 /* PCIE0 INTA*/
-#define UIC_PCIE1INTB 0x00080000 /* PCIE0 INTB*/
-#define UIC_PCIE1INTC 0x00040000 /* PCIE0 INTC*/
-#define UIC_PCIE1INTD 0x00020000 /* PCIE0 INTD*/
-#define UIC_RPCIEMSI2 0x00010000 /* MSI level 2 Note this looks same as uic0-26*/
-#define UIC_PCIEMSI3 0x00008000 /* MSI level 2*/
-#define UIC_PCIEMSI4 0x00004000 /* MSI level 2*/
-#define UIC_PCIEMSI5 0x00002000 /* MSI level 2*/
-#define UIC_PCIEMSI6 0x00001000 /* MSI level 2*/
-#define UIC_PCIEMSI7 0x00000800 /* MSI level 2*/
-#define UIC_PCIEMSI8 0x00000400 /* MSI level 2*/
-#define UIC_PCIEMSI9 0x00000200 /* MSI level 2*/
-#define UIC_PCIEMSI10 0x00000100 /* MSI level 2*/
-#define UIC_PCIEMSI11 0x00000080 /* MSI level 2*/
-#define UIC_PCIEMSI12 0x00000040 /* MSI level 2*/
-#define UIC_PCIEMSI13 0x00000020 /* MSI level 2*/
-#define UIC_PCIEMSI14 0x00000010 /* MSI level 2*/
-#define UIC_PCIEMSI15 0x00000008 /* MSI level 2*/
-#define UIC_PLB4XAHB 0x00000004 /* PLBxAHB bridge*/
-#define UIC_USBWAKE 0x00000002 /* USB wakup*/
-#define UIC_USBOTG 0x00000001 /* USB OTG*/
+#define UIC_PCIE0INTA 0x80000000 /* PCIE0 INTA*/
+#define UIC_PCIE0INTB 0x40000000 /* PCIE0 INTB*/
+#define UIC_PCIE0INTC 0x20000000 /* PCIE0 INTC*/
+#define UIC_PCIE0INTD 0x10000000 /* PCIE0 INTD*/
+#define UIC_EIRQ3 0x08000000 /* External IRQ 3*/
+#define UIC_DDRMCUE 0x04000000 /* */
+#define UIC_DDRMCCE 0x02000000 /* */
+#define UIC_MALINTCOATX0 0x01000000 /* Interrupt coalecence TX0*/
+#define UIC_MALINTCOATX1 0x00800000 /* Interrupt coalecence TX1*/
+#define UIC_MALINTCOARX0 0x00400000 /* Interrupt coalecence RX0*/
+#define UIC_MALINTCOARX1 0x00200000 /* Interrupt coalecence RX1*/
+#define UIC_PCIE1INTA 0x00100000 /* PCIE0 INTA*/
+#define UIC_PCIE1INTB 0x00080000 /* PCIE0 INTB*/
+#define UIC_PCIE1INTC 0x00040000 /* PCIE0 INTC*/
+#define UIC_PCIE1INTD 0x00020000 /* PCIE0 INTD*/
+#define UIC_RPCIEMSI2 0x00010000 /* MSI level 2 Note this looks same as uic0-26*/
+#define UIC_PCIEMSI3 0x00008000 /* MSI level 2*/
+#define UIC_PCIEMSI4 0x00004000 /* MSI level 2*/
+#define UIC_PCIEMSI5 0x00002000 /* MSI level 2*/
+#define UIC_PCIEMSI6 0x00001000 /* MSI level 2*/
+#define UIC_PCIEMSI7 0x00000800 /* MSI level 2*/
+#define UIC_PCIEMSI8 0x00000400 /* MSI level 2*/
+#define UIC_PCIEMSI9 0x00000200 /* MSI level 2*/
+#define UIC_PCIEMSI10 0x00000100 /* MSI level 2*/
+#define UIC_PCIEMSI11 0x00000080 /* MSI level 2*/
+#define UIC_PCIEMSI12 0x00000040 /* MSI level 2*/
+#define UIC_PCIEMSI13 0x00000020 /* MSI level 2*/
+#define UIC_PCIEMSI14 0x00000010 /* MSI level 2*/
+#define UIC_PCIEMSI15 0x00000008 /* MSI level 2*/
+#define UIC_PLB4XAHB 0x00000004 /* PLBxAHB bridge*/
+#define UIC_USBWAKE 0x00000002 /* USB wakup*/
+#define UIC_USBOTG 0x00000001 /* USB OTG*/
#define UIC_ETH0 UIC_ENET
#define UIC_ETH1 UIC_ENET1
#else /* !defined(CONFIG_405EZ) */
-#define UIC_UART0 0x80000000 /* UART 0 */
-#define UIC_UART1 0x40000000 /* UART 1 */
-#define UIC_IIC 0x20000000 /* IIC */
-#define UIC_EXT_MAST 0x10000000 /* External Master */
-#define UIC_PCI 0x08000000 /* PCI write to command reg */
-#define UIC_DMA0 0x04000000 /* DMA chan. 0 */
-#define UIC_DMA1 0x02000000 /* DMA chan. 1 */
-#define UIC_DMA2 0x01000000 /* DMA chan. 2 */
-#define UIC_DMA3 0x00800000 /* DMA chan. 3 */
-#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */
-#define UIC_MAL_SERR 0x00200000 /* MAL SERR */
-#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */
-#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */
-#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */
-#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */
-#define UIC_ENET 0x00010000 /* Ethernet0 */
-#define UIC_ENET1 0x00004000 /* Ethernet1 on 405EP */
+#define UIC_UART0 0x80000000 /* UART 0 */
+#define UIC_UART1 0x40000000 /* UART 1 */
+#define UIC_IIC 0x20000000 /* IIC */
+#define UIC_EXT_MAST 0x10000000 /* External Master */
+#define UIC_PCI 0x08000000 /* PCI write to command reg */
+#define UIC_DMA0 0x04000000 /* DMA chan. 0 */
+#define UIC_DMA1 0x02000000 /* DMA chan. 1 */
+#define UIC_DMA2 0x01000000 /* DMA chan. 2 */
+#define UIC_DMA3 0x00800000 /* DMA chan. 3 */
+#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */
+#define UIC_MAL_SERR 0x00200000 /* MAL SERR */
+#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */
+#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */
+#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */
+#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */
+#define UIC_ENET 0x00010000 /* Ethernet0 */
+#define UIC_ENET1 0x00004000 /* Ethernet1 on 405EP */
#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error on 405GP */
-#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */
-#define UIC_PCI_PM 0x00002000 /* PCI Power Management */
-#define UIC_EXT0 0x00000040 /* External interrupt 0 */
-#define UIC_EXT1 0x00000020 /* External interrupt 1 */
-#define UIC_EXT2 0x00000010 /* External interrupt 2 */
-#define UIC_EXT3 0x00000008 /* External interrupt 3 */
-#define UIC_EXT4 0x00000004 /* External interrupt 4 */
-#define UIC_EXT5 0x00000002 /* External interrupt 5 */
-#define UIC_EXT6 0x00000001 /* External interrupt 6 */
+#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */
+#define UIC_PCI_PM 0x00002000 /* PCI Power Management */
+#define UIC_EXT0 0x00000040 /* External interrupt 0 */
+#define UIC_EXT1 0x00000020 /* External interrupt 1 */
+#define UIC_EXT2 0x00000010 /* External interrupt 2 */
+#define UIC_EXT3 0x00000008 /* External interrupt 3 */
+#define UIC_EXT4 0x00000004 /* External interrupt 4 */
+#define UIC_EXT5 0x00000002 /* External interrupt 5 */
+#define UIC_EXT6 0x00000001 /* External interrupt 6 */
#endif /* defined(CONFIG_405EZ) */
/******************************************************************************
@@ -404,15 +404,15 @@
#define kaddr0 0x04 /* address decode definition regsiter 0 */
#define kaddr1 0x05 /* address decode definition regsiter 1 */
#define kconf 0x40 /* decompression core config register */
- #define kid 0x41 /* decompression core ID register */
- #define kver 0x42 /* decompression core version # reg */
- #define kpear 0x50 /* bus error addr reg (PLB addr) */
+ #define kid 0x41 /* decompression core ID register */
+ #define kver 0x42 /* decompression core version # reg */
+ #define kpear 0x50 /* bus error addr reg (PLB addr) */
#define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/
#define kesr0 0x52 /* bus error status reg 0 (R/clear) */
- #define kesr0s 0x53 /* bus error status reg 0 (set) */
+ #define kesr0s 0x53 /* bus error status reg 0 (set) */
/* There are 0x400 of the following registers, from krom0 to krom3ff*/
- /* Only the first one is given here. */
- #define krom0 0x400 /* SRAM/ROM read/write */
+ /* Only the first one is given here. */
+ #define krom0 0x400 /* SRAM/ROM read/write */
#endif
/******************************************************************************
@@ -423,23 +423,23 @@
#else
#define POWERMAN_DCR_BASE 0xb8
#endif
-#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */
-#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */
-#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */
+#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */
+#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */
+#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */
/******************************************************************************
* Extrnal Bus Controller
******************************************************************************/
/* values for ebccfga register - indirect addressing of these regs */
- #define pb0cr 0x00 /* periph bank 0 config reg */
- #define pb1cr 0x01 /* periph bank 1 config reg */
- #define pb2cr 0x02 /* periph bank 2 config reg */
- #define pb3cr 0x03 /* periph bank 3 config reg */
- #define pb4cr 0x04 /* periph bank 4 config reg */
+ #define pb0cr 0x00 /* periph bank 0 config reg */
+ #define pb1cr 0x01 /* periph bank 1 config reg */
+ #define pb2cr 0x02 /* periph bank 2 config reg */
+ #define pb3cr 0x03 /* periph bank 3 config reg */
+ #define pb4cr 0x04 /* periph bank 4 config reg */
#ifndef CONFIG_405EP
- #define pb5cr 0x05 /* periph bank 5 config reg */
- #define pb6cr 0x06 /* periph bank 6 config reg */
- #define pb7cr 0x07 /* periph bank 7 config reg */
+ #define pb5cr 0x05 /* periph bank 5 config reg */
+ #define pb6cr 0x06 /* periph bank 6 config reg */
+ #define pb7cr 0x07 /* periph bank 7 config reg */
#endif
#define pb0ap 0x10 /* periph bank 0 access parameters */
#define pb1ap 0x11 /* periph bank 1 access parameters */
@@ -451,10 +451,10 @@
#define pb6ap 0x16 /* periph bank 6 access parameters */
#define pb7ap 0x17 /* periph bank 7 access parameters */
#endif
- #define pbear 0x20 /* periph bus error addr reg */
- #define pbesr0 0x21 /* periph bus error status reg 0 */
- #define pbesr1 0x22 /* periph bus error status reg 1 */
- #define epcr 0x23 /* external periph control reg */
+ #define pbear 0x20 /* periph bus error addr reg */
+ #define pbesr0 0x21 /* periph bus error status reg 0 */
+ #define pbesr1 0x22 /* periph bus error status reg 1 */
+ #define epcr 0x23 /* external periph control reg */
#define EBC0_CFG 0x23 /* external bus configuration reg */
#ifdef CONFIG_405EP
@@ -462,210 +462,210 @@
* Control
******************************************************************************/
#define CNTRL_DCR_BASE 0x0f0
-#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */
-#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */
-#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */
-#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */
-#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */
-#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */
-
-#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
+#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */
+#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */
+#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */
+#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */
+#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */
+#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */
+
+#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */
-#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
+#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register*/
-#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */
-#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */
-#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */
-#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */
-#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */
-#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */
+#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */
+#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */
+#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */
+#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */
+#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */
+#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */
/* Bit definitions */
-#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */
-#define PLLMR0_CPU_DIV_BYPASS 0x00000000
-#define PLLMR0_CPU_DIV_2 0x00100000
-#define PLLMR0_CPU_DIV_3 0x00200000
-#define PLLMR0_CPU_DIV_4 0x00300000
-
-#define PLLMR0_CPU_TO_PLB_MASK 0x00030000 /* CPU:PLB Frequency Divisor */
-#define PLLMR0_CPU_PLB_DIV_1 0x00000000
-#define PLLMR0_CPU_PLB_DIV_2 0x00010000
-#define PLLMR0_CPU_PLB_DIV_3 0x00020000
-#define PLLMR0_CPU_PLB_DIV_4 0x00030000
-
-#define PLLMR0_OPB_TO_PLB_MASK 0x00003000 /* OPB:PLB Frequency Divisor */
-#define PLLMR0_OPB_PLB_DIV_1 0x00000000
-#define PLLMR0_OPB_PLB_DIV_2 0x00001000
-#define PLLMR0_OPB_PLB_DIV_3 0x00002000
-#define PLLMR0_OPB_PLB_DIV_4 0x00003000
-
-#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */
-#define PLLMR0_EXB_PLB_DIV_2 0x00000000
-#define PLLMR0_EXB_PLB_DIV_3 0x00000100
-#define PLLMR0_EXB_PLB_DIV_4 0x00000200
-#define PLLMR0_EXB_PLB_DIV_5 0x00000300
-
-#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */
-#define PLLMR0_MAL_PLB_DIV_1 0x00000000
-#define PLLMR0_MAL_PLB_DIV_2 0x00000010
-#define PLLMR0_MAL_PLB_DIV_3 0x00000020
-#define PLLMR0_MAL_PLB_DIV_4 0x00000030
-
-#define PLLMR0_PCI_TO_PLB_MASK 0x00000003 /* PCI:PLB Frequency Divisor */
-#define PLLMR0_PCI_PLB_DIV_1 0x00000000
-#define PLLMR0_PCI_PLB_DIV_2 0x00000001
-#define PLLMR0_PCI_PLB_DIV_3 0x00000002
-#define PLLMR0_PCI_PLB_DIV_4 0x00000003
-
-#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */
-#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */
-#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */
-#define PLLMR1_FBMUL_DIV_16 0x00000000
-#define PLLMR1_FBMUL_DIV_1 0x00100000
-#define PLLMR1_FBMUL_DIV_2 0x00200000
-#define PLLMR1_FBMUL_DIV_3 0x00300000
-#define PLLMR1_FBMUL_DIV_4 0x00400000
-#define PLLMR1_FBMUL_DIV_5 0x00500000
-#define PLLMR1_FBMUL_DIV_6 0x00600000
-#define PLLMR1_FBMUL_DIV_7 0x00700000
-#define PLLMR1_FBMUL_DIV_8 0x00800000
-#define PLLMR1_FBMUL_DIV_9 0x00900000
-#define PLLMR1_FBMUL_DIV_10 0x00A00000
-#define PLLMR1_FBMUL_DIV_11 0x00B00000
-#define PLLMR1_FBMUL_DIV_12 0x00C00000
-#define PLLMR1_FBMUL_DIV_13 0x00D00000
-#define PLLMR1_FBMUL_DIV_14 0x00E00000
-#define PLLMR1_FBMUL_DIV_15 0x00F00000
-
-#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */
-#define PLLMR1_FWDVA_DIV_8 0x00000000
-#define PLLMR1_FWDVA_DIV_7 0x00010000
-#define PLLMR1_FWDVA_DIV_6 0x00020000
-#define PLLMR1_FWDVA_DIV_5 0x00030000
-#define PLLMR1_FWDVA_DIV_4 0x00040000
-#define PLLMR1_FWDVA_DIV_3 0x00050000
-#define PLLMR1_FWDVA_DIV_2 0x00060000
-#define PLLMR1_FWDVA_DIV_1 0x00070000
-#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */
-#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */
+#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */
+#define PLLMR0_CPU_DIV_BYPASS 0x00000000
+#define PLLMR0_CPU_DIV_2 0x00100000
+#define PLLMR0_CPU_DIV_3 0x00200000
+#define PLLMR0_CPU_DIV_4 0x00300000
+
+#define PLLMR0_CPU_TO_PLB_MASK 0x00030000 /* CPU:PLB Frequency Divisor */
+#define PLLMR0_CPU_PLB_DIV_1 0x00000000
+#define PLLMR0_CPU_PLB_DIV_2 0x00010000
+#define PLLMR0_CPU_PLB_DIV_3 0x00020000
+#define PLLMR0_CPU_PLB_DIV_4 0x00030000
+
+#define PLLMR0_OPB_TO_PLB_MASK 0x00003000 /* OPB:PLB Frequency Divisor */
+#define PLLMR0_OPB_PLB_DIV_1 0x00000000
+#define PLLMR0_OPB_PLB_DIV_2 0x00001000
+#define PLLMR0_OPB_PLB_DIV_3 0x00002000
+#define PLLMR0_OPB_PLB_DIV_4 0x00003000
+
+#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */
+#define PLLMR0_EXB_PLB_DIV_2 0x00000000
+#define PLLMR0_EXB_PLB_DIV_3 0x00000100
+#define PLLMR0_EXB_PLB_DIV_4 0x00000200
+#define PLLMR0_EXB_PLB_DIV_5 0x00000300
+
+#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */
+#define PLLMR0_MAL_PLB_DIV_1 0x00000000
+#define PLLMR0_MAL_PLB_DIV_2 0x00000010
+#define PLLMR0_MAL_PLB_DIV_3 0x00000020
+#define PLLMR0_MAL_PLB_DIV_4 0x00000030
+
+#define PLLMR0_PCI_TO_PLB_MASK 0x00000003 /* PCI:PLB Frequency Divisor */
+#define PLLMR0_PCI_PLB_DIV_1 0x00000000
+#define PLLMR0_PCI_PLB_DIV_2 0x00000001
+#define PLLMR0_PCI_PLB_DIV_3 0x00000002
+#define PLLMR0_PCI_PLB_DIV_4 0x00000003
+
+#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */
+#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */
+#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */
+#define PLLMR1_FBMUL_DIV_16 0x00000000
+#define PLLMR1_FBMUL_DIV_1 0x00100000
+#define PLLMR1_FBMUL_DIV_2 0x00200000
+#define PLLMR1_FBMUL_DIV_3 0x00300000
+#define PLLMR1_FBMUL_DIV_4 0x00400000
+#define PLLMR1_FBMUL_DIV_5 0x00500000
+#define PLLMR1_FBMUL_DIV_6 0x00600000
+#define PLLMR1_FBMUL_DIV_7 0x00700000
+#define PLLMR1_FBMUL_DIV_8 0x00800000
+#define PLLMR1_FBMUL_DIV_9 0x00900000
+#define PLLMR1_FBMUL_DIV_10 0x00A00000
+#define PLLMR1_FBMUL_DIV_11 0x00B00000
+#define PLLMR1_FBMUL_DIV_12 0x00C00000
+#define PLLMR1_FBMUL_DIV_13 0x00D00000
+#define PLLMR1_FBMUL_DIV_14 0x00E00000
+#define PLLMR1_FBMUL_DIV_15 0x00F00000
+
+#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */
+#define PLLMR1_FWDVA_DIV_8 0x00000000
+#define PLLMR1_FWDVA_DIV_7 0x00010000
+#define PLLMR1_FWDVA_DIV_6 0x00020000
+#define PLLMR1_FWDVA_DIV_5 0x00030000
+#define PLLMR1_FWDVA_DIV_4 0x00040000
+#define PLLMR1_FWDVA_DIV_3 0x00050000
+#define PLLMR1_FWDVA_DIV_2 0x00060000
+#define PLLMR1_FWDVA_DIV_1 0x00070000
+#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */
+#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */
/* Defines for CPC0_EPRCSR register */
-#define CPC0_EPRCSR_E0NFE 0x80000000
-#define CPC0_EPRCSR_E1NFE 0x40000000
-#define CPC0_EPRCSR_E1RPP 0x00000080
-#define CPC0_EPRCSR_E0RPP 0x00000040
-#define CPC0_EPRCSR_E1ERP 0x00000020
-#define CPC0_EPRCSR_E0ERP 0x00000010
-#define CPC0_EPRCSR_E1PCI 0x00000002
-#define CPC0_EPRCSR_E0PCI 0x00000001
+#define CPC0_EPRCSR_E0NFE 0x80000000
+#define CPC0_EPRCSR_E1NFE 0x40000000
+#define CPC0_EPRCSR_E1RPP 0x00000080
+#define CPC0_EPRCSR_E0RPP 0x00000040
+#define CPC0_EPRCSR_E1ERP 0x00000020
+#define CPC0_EPRCSR_E0ERP 0x00000010
+#define CPC0_EPRCSR_E1PCI 0x00000002
+#define CPC0_EPRCSR_E0PCI 0x00000001
/* Defines for CPC0_PCI Register */
-#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */
-#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */
-#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled*/
+#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */
+#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */
+#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled*/
/* Defines for CPC0_BOOR Register */
-#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */
+#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */
/* Defines for CPC0_PLLMR1 Register fields */
-#define PLL_ACTIVE 0x80000000
-#define CPC0_PLLMR1_SSCS 0x80000000
-#define PLL_RESET 0x40000000
-#define CPC0_PLLMR1_PLLR 0x40000000
+#define PLL_ACTIVE 0x80000000
+#define CPC0_PLLMR1_SSCS 0x80000000
+#define PLL_RESET 0x40000000
+#define CPC0_PLLMR1_PLLR 0x40000000
/* Feedback multiplier */
-#define PLL_FBKDIV 0x00F00000
-#define CPC0_PLLMR1_FBDV 0x00F00000
-#define PLL_FBKDIV_16 0x00000000
-#define PLL_FBKDIV_1 0x00100000
-#define PLL_FBKDIV_2 0x00200000
-#define PLL_FBKDIV_3 0x00300000
-#define PLL_FBKDIV_4 0x00400000
-#define PLL_FBKDIV_5 0x00500000
-#define PLL_FBKDIV_6 0x00600000
-#define PLL_FBKDIV_7 0x00700000
-#define PLL_FBKDIV_8 0x00800000
-#define PLL_FBKDIV_9 0x00900000
-#define PLL_FBKDIV_10 0x00A00000
-#define PLL_FBKDIV_11 0x00B00000
-#define PLL_FBKDIV_12 0x00C00000
-#define PLL_FBKDIV_13 0x00D00000
-#define PLL_FBKDIV_14 0x00E00000
-#define PLL_FBKDIV_15 0x00F00000
+#define PLL_FBKDIV 0x00F00000
+#define CPC0_PLLMR1_FBDV 0x00F00000
+#define PLL_FBKDIV_16 0x00000000
+#define PLL_FBKDIV_1 0x00100000
+#define PLL_FBKDIV_2 0x00200000
+#define PLL_FBKDIV_3 0x00300000
+#define PLL_FBKDIV_4 0x00400000
+#define PLL_FBKDIV_5 0x00500000
+#define PLL_FBKDIV_6 0x00600000
+#define PLL_FBKDIV_7 0x00700000
+#define PLL_FBKDIV_8 0x00800000
+#define PLL_FBKDIV_9 0x00900000
+#define PLL_FBKDIV_10 0x00A00000
+#define PLL_FBKDIV_11 0x00B00000
+#define PLL_FBKDIV_12 0x00C00000
+#define PLL_FBKDIV_13 0x00D00000
+#define PLL_FBKDIV_14 0x00E00000
+#define PLL_FBKDIV_15 0x00F00000
/* Forward A divisor */
-#define PLL_FWDDIVA 0x00070000
-#define CPC0_PLLMR1_FWDVA 0x00070000
-#define PLL_FWDDIVA_8 0x00000000
-#define PLL_FWDDIVA_7 0x00010000
-#define PLL_FWDDIVA_6 0x00020000
-#define PLL_FWDDIVA_5 0x00030000
-#define PLL_FWDDIVA_4 0x00040000
-#define PLL_FWDDIVA_3 0x00050000
-#define PLL_FWDDIVA_2 0x00060000
-#define PLL_FWDDIVA_1 0x00070000
+#define PLL_FWDDIVA 0x00070000
+#define CPC0_PLLMR1_FWDVA 0x00070000
+#define PLL_FWDDIVA_8 0x00000000
+#define PLL_FWDDIVA_7 0x00010000
+#define PLL_FWDDIVA_6 0x00020000
+#define PLL_FWDDIVA_5 0x00030000
+#define PLL_FWDDIVA_4 0x00040000
+#define PLL_FWDDIVA_3 0x00050000
+#define PLL_FWDDIVA_2 0x00060000
+#define PLL_FWDDIVA_1 0x00070000
/* Forward B divisor */
-#define PLL_FWDDIVB 0x00007000
-#define CPC0_PLLMR1_FWDVB 0x00007000
-#define PLL_FWDDIVB_8 0x00000000
-#define PLL_FWDDIVB_7 0x00001000
-#define PLL_FWDDIVB_6 0x00002000
-#define PLL_FWDDIVB_5 0x00003000
-#define PLL_FWDDIVB_4 0x00004000
-#define PLL_FWDDIVB_3 0x00005000
-#define PLL_FWDDIVB_2 0x00006000
-#define PLL_FWDDIVB_1 0x00007000
+#define PLL_FWDDIVB 0x00007000
+#define CPC0_PLLMR1_FWDVB 0x00007000
+#define PLL_FWDDIVB_8 0x00000000
+#define PLL_FWDDIVB_7 0x00001000
+#define PLL_FWDDIVB_6 0x00002000
+#define PLL_FWDDIVB_5 0x00003000
+#define PLL_FWDDIVB_4 0x00004000
+#define PLL_FWDDIVB_3 0x00005000
+#define PLL_FWDDIVB_2 0x00006000
+#define PLL_FWDDIVB_1 0x00007000
/* PLL tune bits */
-#define PLL_TUNE_MASK 0x000003FF
-#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */
-#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */
-#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */
-#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */
-#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */
-#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */
-#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */
+#define PLL_TUNE_MASK 0x000003FF
+#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */
+#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */
+#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */
+#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */
+#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */
+#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */
+#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */
/* Defines for CPC0_PLLMR0 Register fields */
/* CPU divisor */
-#define PLL_CPUDIV 0x00300000
-#define CPC0_PLLMR0_CCDV 0x00300000
-#define PLL_CPUDIV_1 0x00000000
-#define PLL_CPUDIV_2 0x00100000
-#define PLL_CPUDIV_3 0x00200000
-#define PLL_CPUDIV_4 0x00300000
+#define PLL_CPUDIV 0x00300000
+#define CPC0_PLLMR0_CCDV 0x00300000
+#define PLL_CPUDIV_1 0x00000000
+#define PLL_CPUDIV_2 0x00100000
+#define PLL_CPUDIV_3 0x00200000
+#define PLL_CPUDIV_4 0x00300000
/* PLB divisor */
-#define PLL_PLBDIV 0x00030000
-#define CPC0_PLLMR0_CBDV 0x00030000
-#define PLL_PLBDIV_1 0x00000000
-#define PLL_PLBDIV_2 0x00010000
-#define PLL_PLBDIV_3 0x00020000
-#define PLL_PLBDIV_4 0x00030000
+#define PLL_PLBDIV 0x00030000
+#define CPC0_PLLMR0_CBDV 0x00030000
+#define PLL_PLBDIV_1 0x00000000
+#define PLL_PLBDIV_2 0x00010000
+#define PLL_PLBDIV_3 0x00020000
+#define PLL_PLBDIV_4 0x00030000
/* OPB divisor */
-#define PLL_OPBDIV 0x00003000
-#define CPC0_PLLMR0_OPDV 0x00003000
-#define PLL_OPBDIV_1 0x00000000
-#define PLL_OPBDIV_2 0x00001000
-#define PLL_OPBDIV_3 0x00002000
-#define PLL_OPBDIV_4 0x00003000
+#define PLL_OPBDIV 0x00003000
+#define CPC0_PLLMR0_OPDV 0x00003000
+#define PLL_OPBDIV_1 0x00000000
+#define PLL_OPBDIV_2 0x00001000
+#define PLL_OPBDIV_3 0x00002000
+#define PLL_OPBDIV_4 0x00003000
/* EBC divisor */
-#define PLL_EXTBUSDIV 0x00000300
-#define CPC0_PLLMR0_EPDV 0x00000300
-#define PLL_EXTBUSDIV_2 0x00000000
-#define PLL_EXTBUSDIV_3 0x00000100
-#define PLL_EXTBUSDIV_4 0x00000200
-#define PLL_EXTBUSDIV_5 0x00000300
+#define PLL_EXTBUSDIV 0x00000300
+#define CPC0_PLLMR0_EPDV 0x00000300
+#define PLL_EXTBUSDIV_2 0x00000000
+#define PLL_EXTBUSDIV_3 0x00000100
+#define PLL_EXTBUSDIV_4 0x00000200
+#define PLL_EXTBUSDIV_5 0x00000300
/* MAL divisor */
-#define PLL_MALDIV 0x00000030
-#define CPC0_PLLMR0_MPDV 0x00000030
-#define PLL_MALDIV_1 0x00000000
-#define PLL_MALDIV_2 0x00000010
-#define PLL_MALDIV_3 0x00000020
-#define PLL_MALDIV_4 0x00000030
+#define PLL_MALDIV 0x00000030
+#define CPC0_PLLMR0_MPDV 0x00000030
+#define PLL_MALDIV_1 0x00000000
+#define PLL_MALDIV_2 0x00000010
+#define PLL_MALDIV_3 0x00000020
+#define PLL_MALDIV_4 0x00000030
/* PCI divisor */
-#define PLL_PCIDIV 0x00000003
-#define CPC0_PLLMR0_PPFD 0x00000003
-#define PLL_PCIDIV_1 0x00000000
-#define PLL_PCIDIV_2 0x00000001
-#define PLL_PCIDIV_3 0x00000002
-#define PLL_PCIDIV_4 0x00000003
+#define PLL_PCIDIV 0x00000003
+#define CPC0_PLLMR0_PPFD 0x00000003
+#define PLL_PCIDIV_1 0x00000000
+#define PLL_PCIDIV_2 0x00000001
+#define PLL_PCIDIV_3 0x00000002
+#define PLL_PCIDIV_4 0x00000003
/*
*-------------------------------------------------------------------------------
@@ -681,37 +681,37 @@
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \
PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \
PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
PLL_MALDIV_1 | PLL_PCIDIV_2)
#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
PLL_MALDIV_1 | PLL_PCIDIV_3)
-#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
+#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
PLL_MALDIV_1 | PLL_PCIDIV_1)
#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
@@ -758,23 +758,23 @@
* Control
******************************************************************************/
/* CPR Registers */
-#define cprclkupd 0x020 /* CPR_CLKUPD */
-#define cprpllc 0x040 /* CPR_PLLC */
-#define cprplld 0x060 /* CPR_PLLD */
-#define cprprimad 0x080 /* CPR_PRIMAD */
-#define cprperd0 0x0e0 /* CPR_PERD0 */
-#define cprperd1 0x0e1 /* CPR_PERD1 */
-#define cprperc0 0x180 /* CPR_PERC0 */
-#define cprmisc0 0x181 /* CPR_MISC0 */
-#define cprmisc1 0x182 /* CPR_MISC1 */
+#define cprclkupd 0x020 /* CPR_CLKUPD */
+#define cprpllc 0x040 /* CPR_PLLC */
+#define cprplld 0x060 /* CPR_PLLD */
+#define cprprimad 0x080 /* CPR_PRIMAD */
+#define cprperd0 0x0e0 /* CPR_PERD0 */
+#define cprperd1 0x0e1 /* CPR_PERD1 */
+#define cprperc0 0x180 /* CPR_PERC0 */
+#define cprmisc0 0x181 /* CPR_MISC0 */
+#define cprmisc1 0x182 /* CPR_MISC1 */
#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */
#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */
#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
-#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
-#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
+#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
@@ -793,77 +793,77 @@
* Control
******************************************************************************/
#define CNTRL_DCR_BASE 0x0b0
-#define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */
-#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */
-#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */
-#define reset (CNTRL_DCR_BASE+0x3) /* reset register */
-#define strap (CNTRL_DCR_BASE+0x4) /* strap register */
+#define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */
+#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */
+#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */
+#define reset (CNTRL_DCR_BASE+0x3) /* reset register */
+#define strap (CNTRL_DCR_BASE+0x4) /* strap register */
-#define CPC0_CR0 (CNTRL_DCR_BASE+0x1) /* chip control register 0 */
-#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* chip control register 1 */
-#define CPC0_PSR (CNTRL_DCR_BASE+0x4) /* chip pin strapping register */
+#define CPC0_CR0 (CNTRL_DCR_BASE+0x1) /* chip control register 0 */
+#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* chip control register 1 */
+#define CPC0_PSR (CNTRL_DCR_BASE+0x4) /* chip pin strapping register */
/* CPC0_ECR/CPC0_EIRR: PPC405GPr only */
#define CPC0_EIRR (CNTRL_DCR_BASE+0x6) /* external interrupt routing register */
#define CPC0_ECR (0xaa) /* edge conditioner register */
-#define ecr (0xaa) /* edge conditioner register (405gpr) */
+#define ecr (0xaa) /* edge conditioner register (405gpr) */
/* Bit definitions */
-#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
-#define PLLMR_FWD_DIV_BYPASS 0xE0000000
-#define PLLMR_FWD_DIV_3 0xA0000000
-#define PLLMR_FWD_DIV_4 0x80000000
-#define PLLMR_FWD_DIV_6 0x40000000
-
-#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
-#define PLLMR_FB_DIV_1 0x02000000
-#define PLLMR_FB_DIV_2 0x04000000
-#define PLLMR_FB_DIV_3 0x06000000
-#define PLLMR_FB_DIV_4 0x08000000
-
-#define PLLMR_TUNING_MASK 0x01F80000
-
-#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
-#define PLLMR_CPU_PLB_DIV_1 0x00000000
-#define PLLMR_CPU_PLB_DIV_2 0x00020000
-#define PLLMR_CPU_PLB_DIV_3 0x00040000
-#define PLLMR_CPU_PLB_DIV_4 0x00060000
-
-#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
-#define PLLMR_OPB_PLB_DIV_1 0x00000000
-#define PLLMR_OPB_PLB_DIV_2 0x00008000
-#define PLLMR_OPB_PLB_DIV_3 0x00010000
-#define PLLMR_OPB_PLB_DIV_4 0x00018000
-
-#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
-#define PLLMR_PCI_PLB_DIV_1 0x00000000
-#define PLLMR_PCI_PLB_DIV_2 0x00002000
-#define PLLMR_PCI_PLB_DIV_3 0x00004000
-#define PLLMR_PCI_PLB_DIV_4 0x00006000
-
-#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
-#define PLLMR_EXB_PLB_DIV_2 0x00000000
-#define PLLMR_EXB_PLB_DIV_3 0x00000800
-#define PLLMR_EXB_PLB_DIV_4 0x00001000
-#define PLLMR_EXB_PLB_DIV_5 0x00001800
+#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
+#define PLLMR_FWD_DIV_BYPASS 0xE0000000
+#define PLLMR_FWD_DIV_3 0xA0000000
+#define PLLMR_FWD_DIV_4 0x80000000
+#define PLLMR_FWD_DIV_6 0x40000000
+
+#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
+#define PLLMR_FB_DIV_1 0x02000000
+#define PLLMR_FB_DIV_2 0x04000000
+#define PLLMR_FB_DIV_3 0x06000000
+#define PLLMR_FB_DIV_4 0x08000000
+
+#define PLLMR_TUNING_MASK 0x01F80000
+
+#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
+#define PLLMR_CPU_PLB_DIV_1 0x00000000
+#define PLLMR_CPU_PLB_DIV_2 0x00020000
+#define PLLMR_CPU_PLB_DIV_3 0x00040000
+#define PLLMR_CPU_PLB_DIV_4 0x00060000
+
+#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
+#define PLLMR_OPB_PLB_DIV_1 0x00000000
+#define PLLMR_OPB_PLB_DIV_2 0x00008000
+#define PLLMR_OPB_PLB_DIV_3 0x00010000
+#define PLLMR_OPB_PLB_DIV_4 0x00018000
+
+#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
+#define PLLMR_PCI_PLB_DIV_1 0x00000000
+#define PLLMR_PCI_PLB_DIV_2 0x00002000
+#define PLLMR_PCI_PLB_DIV_3 0x00004000
+#define PLLMR_PCI_PLB_DIV_4 0x00006000
+
+#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
+#define PLLMR_EXB_PLB_DIV_2 0x00000000
+#define PLLMR_EXB_PLB_DIV_3 0x00000800
+#define PLLMR_EXB_PLB_DIV_4 0x00001000
+#define PLLMR_EXB_PLB_DIV_5 0x00001800
/* definitions for PPC405GPr (new mode strapping) */
-#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
-
-#define PSR_PLL_FWD_MASK 0xC0000000
-#define PSR_PLL_FDBACK_MASK 0x30000000
-#define PSR_PLL_TUNING_MASK 0x0E000000
-#define PSR_PLB_CPU_MASK 0x01800000
-#define PSR_OPB_PLB_MASK 0x00600000
-#define PSR_PCI_PLB_MASK 0x00180000
-#define PSR_EB_PLB_MASK 0x00060000
-#define PSR_ROM_WIDTH_MASK 0x00018000
-#define PSR_ROM_LOC 0x00004000
-#define PSR_PCI_ASYNC_EN 0x00001000
+#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
+
+#define PSR_PLL_FWD_MASK 0xC0000000
+#define PSR_PLL_FDBACK_MASK 0x30000000
+#define PSR_PLL_TUNING_MASK 0x0E000000
+#define PSR_PLB_CPU_MASK 0x01800000
+#define PSR_OPB_PLB_MASK 0x00600000
+#define PSR_PCI_PLB_MASK 0x00180000
+#define PSR_EB_PLB_MASK 0x00060000
+#define PSR_ROM_WIDTH_MASK 0x00018000
+#define PSR_ROM_LOC 0x00004000
+#define PSR_PCI_ASYNC_EN 0x00001000
#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */
-#define PSR_PCI_ARBIT_EN 0x00000400
-#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
+#define PSR_PCI_ARBIT_EN 0x00000400
+#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
#ifndef CONFIG_IOP480
/*
@@ -994,44 +994,44 @@
#else /* !defined(CONFIG_405EZ) */
#define MAL_DCR_BASE 0x180
-#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
-#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
-#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
-#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
-#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
-#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
+#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
+#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
+#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
+#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
+#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
+#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
-#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
-#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
-#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
+#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
+#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
+#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
-#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
-#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
-#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
-#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
-#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
-#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
-#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
-#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
+#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
+#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
+#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
+#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
+#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
+#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
+#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
+#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
#endif /* defined(CONFIG_405EZ) */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
'----------------------------------------------------------------------------*/
-#define IICMDBUF 0x00
-#define IICSDBUF 0x02
-#define IICLMADR 0x04
-#define IICHMADR 0x05
-#define IICCNTL 0x06
-#define IICMDCNTL 0x07
-#define IICSTS 0x08
-#define IICEXTSTS 0x09
-#define IICLSADR 0x0A
-#define IICHSADR 0x0B
-#define IICCLKDIV 0x0C
-#define IICINTRMSK 0x0D
-#define IICXFRCNT 0x0E
-#define IICXTCNTLSS 0x0F
+#define IICMDBUF 0x00
+#define IICSDBUF 0x02
+#define IICLMADR 0x04
+#define IICHMADR 0x05
+#define IICCNTL 0x06
+#define IICMDCNTL 0x07
+#define IICSTS 0x08
+#define IICEXTSTS 0x09
+#define IICLSADR 0x0A
+#define IICHSADR 0x0B
+#define IICCLKDIV 0x0C
+#define IICINTRMSK 0x0D
+#define IICXFRCNT 0x0E
+#define IICXTCNTLSS 0x0F
#define IICDIRECTCNTL 0x10
/*-----------------------------------------------------------------------------
@@ -1040,40 +1040,40 @@
#define DATA_REG 0x00
#define DL_LSB 0x00
#define DL_MSB 0x01
-#define INT_ENABLE 0x01
-#define FIFO_CONTROL 0x02
-#define LINE_CONTROL 0x03
-#define MODEM_CONTROL 0x04
+#define INT_ENABLE 0x01
+#define FIFO_CONTROL 0x02
+#define LINE_CONTROL 0x03
+#define MODEM_CONTROL 0x04
#define LINE_STATUS 0x05
-#define MODEM_STATUS 0x06
-#define SCRATCH 0x07
+#define MODEM_STATUS 0x06
+#define SCRATCH 0x07
/******************************************************************************
* On Chip Memory
******************************************************************************/
#if defined(CONFIG_405EZ)
#define OCM_DCR_BASE 0x020
-#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */
-#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */
-#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */
-#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */
-#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */
-#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */
-#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */
-#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */
-#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */
-#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */
-#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */
-#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */
-#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/
-#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/
-#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/
+#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */
+#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */
+#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */
+#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */
+#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */
+#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */
+#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */
+#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */
+#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */
+#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */
+#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */
+#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */
+#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/
+#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/
+#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/
#else
#define OCM_DCR_BASE 0x018
-#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */
-#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */
-#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */
-#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */
+#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */
+#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */
+#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */
+#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */
#endif /* CONFIG_405EZ */
/******************************************************************************
@@ -1121,40 +1121,40 @@
#elif defined(CONFIG_405EX)
#define GPIO_BASE 0xEF600800
-#define GPIO0_OR (GPIO_BASE+0x0)
-#define GPIO0_TCR (GPIO_BASE+0x4)
-#define GPIO0_OSRL (GPIO_BASE+0x8)
-#define GPIO0_OSRH (GPIO_BASE+0xC)
-#define GPIO0_TSRL (GPIO_BASE+0x10)
-#define GPIO0_TSRH (GPIO_BASE+0x14)
-#define GPIO0_ODR (GPIO_BASE+0x18)
-#define GPIO0_IR (GPIO_BASE+0x1C)
-#define GPIO0_RR1 (GPIO_BASE+0x20)
-#define GPIO0_RR2 (GPIO_BASE+0x24)
-#define GPIO0_ISR1L (GPIO_BASE+0x30)
-#define GPIO0_ISR1H (GPIO_BASE+0x34)
-#define GPIO0_ISR2L (GPIO_BASE+0x38)
-#define GPIO0_ISR2H (GPIO_BASE+0x3C)
-#define GPIO0_ISR3L (GPIO_BASE+0x40)
-#define GPIO0_ISR3H (GPIO_BASE+0x44)
+#define GPIO0_OR (GPIO_BASE+0x0)
+#define GPIO0_TCR (GPIO_BASE+0x4)
+#define GPIO0_OSRL (GPIO_BASE+0x8)
+#define GPIO0_OSRH (GPIO_BASE+0xC)
+#define GPIO0_TSRL (GPIO_BASE+0x10)
+#define GPIO0_TSRH (GPIO_BASE+0x14)
+#define GPIO0_ODR (GPIO_BASE+0x18)
+#define GPIO0_IR (GPIO_BASE+0x1C)
+#define GPIO0_RR1 (GPIO_BASE+0x20)
+#define GPIO0_RR2 (GPIO_BASE+0x24)
+#define GPIO0_ISR1L (GPIO_BASE+0x30)
+#define GPIO0_ISR1H (GPIO_BASE+0x34)
+#define GPIO0_ISR2L (GPIO_BASE+0x38)
+#define GPIO0_ISR2H (GPIO_BASE+0x3C)
+#define GPIO0_ISR3L (GPIO_BASE+0x40)
+#define GPIO0_ISR3H (GPIO_BASE+0x44)
#else /* !405EZ */
#define GPIO_BASE 0xEF600700
-#define GPIO0_OR (GPIO_BASE+0x0)
-#define GPIO0_TCR (GPIO_BASE+0x4)
-#define GPIO0_OSRH (GPIO_BASE+0x8)
-#define GPIO0_OSRL (GPIO_BASE+0xC)
-#define GPIO0_TSRH (GPIO_BASE+0x10)
-#define GPIO0_TSRL (GPIO_BASE+0x14)
-#define GPIO0_ODR (GPIO_BASE+0x18)
-#define GPIO0_IR (GPIO_BASE+0x1C)
-#define GPIO0_RR1 (GPIO_BASE+0x20)
-#define GPIO0_RR2 (GPIO_BASE+0x24)
-#define GPIO0_ISR1H (GPIO_BASE+0x30)
-#define GPIO0_ISR1L (GPIO_BASE+0x34)
-#define GPIO0_ISR2H (GPIO_BASE+0x38)
-#define GPIO0_ISR2L (GPIO_BASE+0x3C)
+#define GPIO0_OR (GPIO_BASE+0x0)
+#define GPIO0_TCR (GPIO_BASE+0x4)
+#define GPIO0_OSRH (GPIO_BASE+0x8)
+#define GPIO0_OSRL (GPIO_BASE+0xC)
+#define GPIO0_TSRH (GPIO_BASE+0x10)
+#define GPIO0_TSRL (GPIO_BASE+0x14)
+#define GPIO0_ODR (GPIO_BASE+0x18)
+#define GPIO0_IR (GPIO_BASE+0x1C)
+#define GPIO0_RR1 (GPIO_BASE+0x20)
+#define GPIO0_RR2 (GPIO_BASE+0x24)
+#define GPIO0_ISR1H (GPIO_BASE+0x30)
+#define GPIO0_ISR1L (GPIO_BASE+0x34)
+#define GPIO0_ISR2H (GPIO_BASE+0x38)
+#define GPIO0_ISR2L (GPIO_BASE+0x3C)
#endif /* CONFIG_405EZ */
@@ -1169,376 +1169,376 @@
#define SDRAM_WMIRQ 0x06 /**/
#define SDRAM_PLBOPT 0x08 /**/
#define SDRAM_PUABA 0x09 /**/
-#define SDRAM_MCSTAT 0x1F /* memory controller status */
-#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
-#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
-#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
-#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
-#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
-#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
-#define SDRAM_CODT 0x26 /* on die termination for controller */
-#define SDRAM_VVPR 0x27 /* variable VRef programmming */
-#define SDRAM_OPARS 0x28 /* on chip driver control setup */
-#define SDRAM_OPART 0x29 /* on chip driver control trigger */
-#define SDRAM_RTR 0x30 /* refresh timer */
-#define SDRAM_PMIT 0x34 /* power management idle timer */
-#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
-#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
-#define SDRAM_MB2CF 0x48 /* memory bank 2 configuration */
-#define SDRAM_MB3CF 0x4C /* memory bank 3 configuration */
-#define SDRAM_INITPLR0 0x50 /* manual initialization control */
-#define SDRAM_INITPLR1 0x51 /* manual initialization control */
-#define SDRAM_INITPLR2 0x52 /* manual initialization control */
-#define SDRAM_INITPLR3 0x53 /* manual initialization control */
-#define SDRAM_INITPLR4 0x54 /* manual initialization control */
-#define SDRAM_INITPLR5 0x55 /* manual initialization control */
-#define SDRAM_INITPLR6 0x56 /* manual initialization control */
-#define SDRAM_INITPLR7 0x57 /* manual initialization control */
-#define SDRAM_INITPLR8 0x58 /* manual initialization control */
-#define SDRAM_INITPLR9 0x59 /* manual initialization control */
-#define SDRAM_INITPLR10 0x5a /* manual initialization control */
-#define SDRAM_INITPLR11 0x5b /* manual initialization control */
-#define SDRAM_INITPLR12 0x5c /* manual initialization control */
-#define SDRAM_INITPLR13 0x5d /* manual initialization control */
-#define SDRAM_INITPLR14 0x5e /* manual initialization control */
-#define SDRAM_INITPLR15 0x5f /* manual initialization control */
-#define SDRAM_RQDC 0x70 /* read DQS delay control */
-#define SDRAM_RFDC 0x74 /* read feedback delay control */
-#define SDRAM_RDCC 0x78 /* read data capture control */
-#define SDRAM_DLCR 0x7A /* delay line calibration */
-#define SDRAM_CLKTR 0x80 /* DDR clock timing */
-#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
-#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
-#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
-#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
-#define SDRAM_MMODE 0x88 /* memory mode */
-#define SDRAM_MEMODE 0x89 /* memory extended mode */
-#define SDRAM_ECCCR 0x98 /* ECC error status */
-#define SDRAM_RID 0xF8 /* revision ID */
+#define SDRAM_MCSTAT 0x1F /* memory controller status */
+#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
+#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
+#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
+#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
+#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
+#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
+#define SDRAM_CODT 0x26 /* on die termination for controller */
+#define SDRAM_VVPR 0x27 /* variable VRef programmming */
+#define SDRAM_OPARS 0x28 /* on chip driver control setup */
+#define SDRAM_OPART 0x29 /* on chip driver control trigger */
+#define SDRAM_RTR 0x30 /* refresh timer */
+#define SDRAM_PMIT 0x34 /* power management idle timer */
+#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
+#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
+#define SDRAM_MB2CF 0x48 /* memory bank 2 configuration */
+#define SDRAM_MB3CF 0x4C /* memory bank 3 configuration */
+#define SDRAM_INITPLR0 0x50 /* manual initialization control */
+#define SDRAM_INITPLR1 0x51 /* manual initialization control */
+#define SDRAM_INITPLR2 0x52 /* manual initialization control */
+#define SDRAM_INITPLR3 0x53 /* manual initialization control */
+#define SDRAM_INITPLR4 0x54 /* manual initialization control */
+#define SDRAM_INITPLR5 0x55 /* manual initialization control */
+#define SDRAM_INITPLR6 0x56 /* manual initialization control */
+#define SDRAM_INITPLR7 0x57 /* manual initialization control */
+#define SDRAM_INITPLR8 0x58 /* manual initialization control */
+#define SDRAM_INITPLR9 0x59 /* manual initialization control */
+#define SDRAM_INITPLR10 0x5a /* manual initialization control */
+#define SDRAM_INITPLR11 0x5b /* manual initialization control */
+#define SDRAM_INITPLR12 0x5c /* manual initialization control */
+#define SDRAM_INITPLR13 0x5d /* manual initialization control */
+#define SDRAM_INITPLR14 0x5e /* manual initialization control */
+#define SDRAM_INITPLR15 0x5f /* manual initialization control */
+#define SDRAM_RQDC 0x70 /* read DQS delay control */
+#define SDRAM_RFDC 0x74 /* read feedback delay control */
+#define SDRAM_RDCC 0x78 /* read data capture control */
+#define SDRAM_DLCR 0x7A /* delay line calibration */
+#define SDRAM_CLKTR 0x80 /* DDR clock timing */
+#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
+#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
+#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
+#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
+#define SDRAM_MMODE 0x88 /* memory mode */
+#define SDRAM_MEMODE 0x89 /* memory extended mode */
+#define SDRAM_ECCCR 0x98 /* ECC error status */
+#define SDRAM_RID 0xF8 /* revision ID */
/*-----------------------------------------------------------------------------+
| Memory Bank 0-7 configuration
+-----------------------------------------------------------------------------*/
-#define SDRAM_RXBAS_SDSZ_4 0x00000000 /* 4M */
-#define SDRAM_RXBAS_SDSZ_8 0x00001000 /* 8M */
-#define SDRAM_RXBAS_SDSZ_16 0x00002000 /* 16M */
-#define SDRAM_RXBAS_SDSZ_32 0x00003000 /* 32M */
-#define SDRAM_RXBAS_SDSZ_64 0x00004000 /* 64M */
-#define SDRAM_RXBAS_SDSZ_128 0x00005000 /* 128M */
-#define SDRAM_RXBAS_SDSZ_256 0x00006000 /* 256M */
-#define SDRAM_RXBAS_SDSZ_512 0x00007000 /* 512M */
-#define SDRAM_RXBAS_SDSZ_1024 0x00008000 /* 1024M */
-#define SDRAM_RXBAS_SDSZ_2048 0x00009000 /* 2048M */
-#define SDRAM_RXBAS_SDSZ_4096 0x0000a000 /* 4096M */
-#define SDRAM_RXBAS_SDSZ_8192 0x0000b000 /* 8192M */
+#define SDRAM_RXBAS_SDSZ_4 0x00000000 /* 4M */
+#define SDRAM_RXBAS_SDSZ_8 0x00001000 /* 8M */
+#define SDRAM_RXBAS_SDSZ_16 0x00002000 /* 16M */
+#define SDRAM_RXBAS_SDSZ_32 0x00003000 /* 32M */
+#define SDRAM_RXBAS_SDSZ_64 0x00004000 /* 64M */
+#define SDRAM_RXBAS_SDSZ_128 0x00005000 /* 128M */
+#define SDRAM_RXBAS_SDSZ_256 0x00006000 /* 256M */
+#define SDRAM_RXBAS_SDSZ_512 0x00007000 /* 512M */
+#define SDRAM_RXBAS_SDSZ_1024 0x00008000 /* 1024M */
+#define SDRAM_RXBAS_SDSZ_2048 0x00009000 /* 2048M */
+#define SDRAM_RXBAS_SDSZ_4096 0x0000a000 /* 4096M */
+#define SDRAM_RXBAS_SDSZ_8192 0x0000b000 /* 8192M */
/*-----------------------------------------------------------------------------+
| Memory Controller Status
+-----------------------------------------------------------------------------*/
-#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
-#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
-#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
-#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */
-#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
-#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */
+#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
+#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
+#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
+#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
+#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 1
+-----------------------------------------------------------------------------*/
-#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask */
-#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask */
+#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3)
-#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
-#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
-#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
-#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
-#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
-#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
-#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
-#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
-#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
-#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
-#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
-#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
-#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
+#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
+#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
+#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
+#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
+#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
+#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
+#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
+#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
+#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
+#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
+#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
+#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
+#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
-#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
-#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
-#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
-#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
-#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
-#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
-#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
-#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
-#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
-#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
-#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
-#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
-#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
-#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
+#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
+#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
+#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
+#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
+#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
+#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
+#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
+#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
+#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
+#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
+#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
+#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
+#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
+#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 2
+-----------------------------------------------------------------------------*/
-#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
-#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
-#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
-#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
-#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
-#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
-#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
-#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
+#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
+#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
+#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
+#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
+#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
+#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
+#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
+#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
-#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
+#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
-#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
+#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
-#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
-#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
+#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
+#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
+#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
/*-----------------------------------------------------------------------------+
| SDRAM Refresh Timer Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_RTR_RINT_MASK 0xFFF80000
-#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
-#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
+#define SDRAM_RTR_RINT_MASK 0xFFF80000
+#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
+#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
/*-----------------------------------------------------------------------------+
| SDRAM Read DQS Delay Control Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_RQDC_RQDE_MASK 0x80000000
-#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
-#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
-#define SDRAM_RQDC_RQFD_MASK 0x000001FF
-#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+#define SDRAM_RQDC_RQDE_MASK 0x80000000
+#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
+#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
+#define SDRAM_RQDC_RQFD_MASK 0x000001FF
+#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
-#define SDRAM_RQDC_RQFD_MAX 0xFF
+#define SDRAM_RQDC_RQFD_MAX 0xFF
/*-----------------------------------------------------------------------------+
| SDRAM Read Data Capture Control Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_RDCC_RDSS_MASK 0xC0000000
-#define SDRAM_RDCC_RDSS_T1 0x00000000
-#define SDRAM_RDCC_RDSS_T2 0x40000000
-#define SDRAM_RDCC_RDSS_T3 0x80000000
-#define SDRAM_RDCC_RDSS_T4 0xC0000000
-#define SDRAM_RDCC_RSAE_MASK 0x00000001
-#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
-#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
+#define SDRAM_RDCC_RDSS_MASK 0xC0000000
+#define SDRAM_RDCC_RDSS_T1 0x00000000
+#define SDRAM_RDCC_RDSS_T2 0x40000000
+#define SDRAM_RDCC_RDSS_T3 0x80000000
+#define SDRAM_RDCC_RDSS_T4 0xC0000000
+#define SDRAM_RDCC_RSAE_MASK 0x00000001
+#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
+#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM Read Feedback Delay Control Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_RFDC_ARSE_MASK 0x80000000
-#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
-#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
-#define SDRAM_RFDC_RFOS_MASK 0x007F0000
-#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define SDRAM_RFDC_RFFD_MASK 0x000003FF
-#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define SDRAM_RFDC_ARSE_MASK 0x80000000
+#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
+#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
+#define SDRAM_RFDC_RFOS_MASK 0x007F0000
+#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define SDRAM_RFDC_RFFD_MASK 0x000003FF
+#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define SDRAM_RFDC_RFFD_MAX 0x4FF
+#define SDRAM_RFDC_RFFD_MAX 0x4FF
/*-----------------------------------------------------------------------------+
| SDRAM Delay Line Calibration Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_DLCR_DCLM_MASK 0x80000000
-#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
-#define SDRAM_DLCR_DCLM_AUTO 0x00000000
-#define SDRAM_DLCR_DLCR_MASK 0x08000000
-#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
-#define SDRAM_DLCR_DLCR_IDLE 0x00000000
-#define SDRAM_DLCR_DLCS_MASK 0x07000000
-#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
-#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
-#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
-#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
-#define SDRAM_DLCR_DLCS_ERROR 0x04000000
-#define SDRAM_DLCR_DLCV_MASK 0x000001FF
-#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
-#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
+#define SDRAM_DLCR_DCLM_MASK 0x80000000
+#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
+#define SDRAM_DLCR_DCLM_AUTO 0x00000000
+#define SDRAM_DLCR_DLCR_MASK 0x08000000
+#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
+#define SDRAM_DLCR_DLCR_IDLE 0x00000000
+#define SDRAM_DLCR_DLCS_MASK 0x07000000
+#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
+#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
+#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
+#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
+#define SDRAM_DLCR_DLCS_ERROR 0x04000000
+#define SDRAM_DLCR_DLCV_MASK 0x000001FF
+#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
+#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
/*-----------------------------------------------------------------------------+
| SDRAM Controller On Die Termination Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_CODT_ODT_ON 0x80000000
-#define SDRAM_CODT_ODT_OFF 0x00000000
-#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
-#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
-#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
-#define SDRAM_CODT_DQS_MASK 0x00000010
-#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
-#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
-#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
-#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
-#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
-#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
-#define SDRAM_CODT_IO_HIZ 0x00000000
-#define SDRAM_CODT_IO_NMODE 0x00000001
+#define SDRAM_CODT_ODT_ON 0x80000000
+#define SDRAM_CODT_ODT_OFF 0x00000000
+#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
+#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
+#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
+#define SDRAM_CODT_DQS_MASK 0x00000010
+#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
+#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
+#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
+#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
+#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
+#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
+#define SDRAM_CODT_IO_HIZ 0x00000000
+#define SDRAM_CODT_IO_NMODE 0x00000001
/*-----------------------------------------------------------------------------+
| SDRAM Mode Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_MMODE_WR_MASK 0x00000E00
-#define SDRAM_MMODE_WR_DDR1 0x00000000
-#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
-#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
-#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
-#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
-#define SDRAM_MMODE_DCL_MASK 0x00000070
-#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
-#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
-#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
-#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
-#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
-#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
-#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
-#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
-#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
+#define SDRAM_MMODE_WR_MASK 0x00000E00
+#define SDRAM_MMODE_WR_DDR1 0x00000000
+#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
+#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
+#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
+#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
+#define SDRAM_MMODE_DCL_MASK 0x00000070
+#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
+#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
+#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
+#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
+#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
+#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
+#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
+#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
+#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
/*-----------------------------------------------------------------------------+
| SDRAM Extended Mode Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_MEMODE_DIC_MASK 0x00000002
-#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
-#define SDRAM_MEMODE_DIC_WEAK 0x00000002
-#define SDRAM_MEMODE_DLL_MASK 0x00000001
-#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
-#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
-#define SDRAM_MEMODE_RTT_MASK 0x00000044
-#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
-#define SDRAM_MEMODE_RTT_75OHM 0x00000004
-#define SDRAM_MEMODE_RTT_150OHM 0x00000040
-#define SDRAM_MEMODE_DQS_MASK 0x00000400
-#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
-#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
+#define SDRAM_MEMODE_DIC_MASK 0x00000002
+#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
+#define SDRAM_MEMODE_DIC_WEAK 0x00000002
+#define SDRAM_MEMODE_DLL_MASK 0x00000001
+#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
+#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
+#define SDRAM_MEMODE_RTT_MASK 0x00000044
+#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
+#define SDRAM_MEMODE_RTT_75OHM 0x00000004
+#define SDRAM_MEMODE_RTT_150OHM 0x00000040
+#define SDRAM_MEMODE_DQS_MASK 0x00000400
+#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
+#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM Clock Timing Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
-#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
-#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
+#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
+#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
+#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
/*-----------------------------------------------------------------------------+
| SDRAM Write Timing Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_WRDTR_WDTP_1_CYC 0x80000000
-#define SDRAM_WRDTR_LLWP_MASK 0x10000000
-#define SDRAM_WRDTR_LLWP_DIS 0x10000000
-#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
-#define SDRAM_WRDTR_WTR_MASK 0x0E000000
-#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
-#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
-#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
+#define SDRAM_WRDTR_WDTP_1_CYC 0x80000000
+#define SDRAM_WRDTR_LLWP_MASK 0x10000000
+#define SDRAM_WRDTR_LLWP_DIS 0x10000000
+#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
+#define SDRAM_WRDTR_WTR_MASK 0x0E000000
+#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
+#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
+#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM SDTR1 Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_SDTR1_LDOF_MASK 0x80000000
-#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
-#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
-#define SDRAM_SDTR1_RTW_MASK 0x00F00000
-#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
-#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
-#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
-#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
-#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
-#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
-#define SDRAM_SDTR1_RTRO_1_CLK 0x00000000
-#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
+#define SDRAM_SDTR1_LDOF_MASK 0x80000000
+#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
+#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
+#define SDRAM_SDTR1_RTW_MASK 0x00F00000
+#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
+#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
+#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
+#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
+#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
+#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
+#define SDRAM_SDTR1_RTRO_1_CLK 0x00000000
+#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
/*-----------------------------------------------------------------------------+
| SDRAM SDTR2 Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_SDTR2_RCD_MASK 0xF0000000
-#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
-#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
-#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
-#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
-#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
-#define SDRAM_SDTR2_WTR_MASK 0x0F000000
+#define SDRAM_SDTR2_RCD_MASK 0xF0000000
+#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
+#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
+#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
+#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
+#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
+#define SDRAM_SDTR2_WTR_MASK 0x0F000000
#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
-#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
+#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
-#define SDRAM_SDTR2_WPC_MASK 0x0000F000
+#define SDRAM_SDTR2_WPC_MASK 0x0000F000
#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12)
-#define SDRAM_SDTR2_RPC_MASK 0x00000F00
+#define SDRAM_SDTR2_RPC_MASK 0x00000F00
#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
-#define SDRAM_SDTR2_RP_MASK 0x000000F0
-#define SDRAM_SDTR2_RP_3_CLK 0x00000030
-#define SDRAM_SDTR2_RP_4_CLK 0x00000040
-#define SDRAM_SDTR2_RP_5_CLK 0x00000050
-#define SDRAM_SDTR2_RP_6_CLK 0x00000060
-#define SDRAM_SDTR2_RP_7_CLK 0x00000070
-#define SDRAM_SDTR2_RRD_MASK 0x0000000F
+#define SDRAM_SDTR2_RP_MASK 0x000000F0
+#define SDRAM_SDTR2_RP_3_CLK 0x00000030
+#define SDRAM_SDTR2_RP_4_CLK 0x00000040
+#define SDRAM_SDTR2_RP_5_CLK 0x00000050
+#define SDRAM_SDTR2_RP_6_CLK 0x00000060
+#define SDRAM_SDTR2_RP_7_CLK 0x00000070
+#define SDRAM_SDTR2_RRD_MASK 0x0000000F
#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
/*-----------------------------------------------------------------------------+
| SDRAM SDTR3 Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_SDTR3_RAS_MASK 0x1F000000
+#define SDRAM_SDTR3_RAS_MASK 0x1F000000
#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define SDRAM_SDTR3_RC_MASK 0x001F0000
+#define SDRAM_SDTR3_RC_MASK 0x001F0000
#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
-#define SDRAM_SDTR3_XCS_MASK 0x00001F00
-#define SDRAM_SDTR3_XCS 0x00000D00
-#define SDRAM_SDTR3_RFC_MASK 0x0000003F
+#define SDRAM_SDTR3_XCS_MASK 0x00001F00
+#define SDRAM_SDTR3_XCS 0x00000D00
+#define SDRAM_SDTR3_RFC_MASK 0x0000003F
#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
/*-----------------------------------------------------------------------------+
| Memory Bank 0-1 configuration
+-----------------------------------------------------------------------------*/
-#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
-#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
-#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
-#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
-#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
-#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
-#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
-#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
-#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
-#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
-#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
-#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
-#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
-#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
+#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
+#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
+#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
+#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
+#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
+#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
+#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
+#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
+#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
+#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
+#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
+#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
#define sdr_uart0 0x0120 /* UART0 Config */
#define sdr_uart1 0x0121 /* UART1 Config */
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
/* Defines for CPC0_EPRCSR register */
-#define CPC0_EPRCSR_E0NFE 0x80000000
-#define CPC0_EPRCSR_E1NFE 0x40000000
-#define CPC0_EPRCSR_E1RPP 0x00000080
-#define CPC0_EPRCSR_E0RPP 0x00000040
-#define CPC0_EPRCSR_E1ERP 0x00000020
-#define CPC0_EPRCSR_E0ERP 0x00000010
-#define CPC0_EPRCSR_E1PCI 0x00000002
-#define CPC0_EPRCSR_E0PCI 0x00000001
+#define CPC0_EPRCSR_E0NFE 0x80000000
+#define CPC0_EPRCSR_E1NFE 0x40000000
+#define CPC0_EPRCSR_E1RPP 0x00000080
+#define CPC0_EPRCSR_E0RPP 0x00000040
+#define CPC0_EPRCSR_E1ERP 0x00000020
+#define CPC0_EPRCSR_E0ERP 0x00000010
+#define CPC0_EPRCSR_E1PCI 0x00000002
+#define CPC0_EPRCSR_E0PCI 0x00000001
#define cpr0_clkupd 0x020
#define cpr0_pllc 0x040
@@ -1556,7 +1556,7 @@
#define SDR0_SDCS_SDD (0x80000000 >> 31)
/* CUST0 Customer Configuration Register0 */
-#define SDR0_CUST0 0x4000
+#define SDR0_CUST0 0x4000
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
@@ -1582,9 +1582,9 @@
#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
-#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
-#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
-#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
+#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
diff --git a/include/ppc440.h b/include/ppc440.h
index 2f6ed97..54b4553 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -2163,7 +2163,7 @@
#define UIC_UIC3NC 0x00008000 /* UIC3 non-critical interrupt */
#define UIC_UIC3C 0x00004000 /* UIC3 critical interrupt */
#define UIC_EIR1 0x00002000 /* External interrupt 1 */
-#define UIC_TRNGDA 0x00001000 /* TRNG data available */
+#define UIC_TRNGDA 0x00001000 /* TRNG data available */
#define UIC_PKAR1 0x00000800 /* PKA ready (PKA[1]) */
#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index 89ff26f..4c97b36 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -318,9 +318,9 @@ typedef struct emac_4xx_hw_st {
#endif
#else
#if defined(CONFIG_405EZ) || defined(CONFIG_405EX)
-#define EMAC_BASE 0xEF600900
+#define EMAC_BASE 0xEF600900
#else
-#define EMAC_BASE 0xEF600800
+#define EMAC_BASE 0xEF600800
#endif
#endif
diff --git a/include/rtc.h b/include/rtc.h
index 2995144..df2d35f 100644
--- a/include/rtc.h
+++ b/include/rtc.h
@@ -35,7 +35,7 @@
* Note that there are small but significant differences to the
* common "struct time":
*
- * struct time: struct rtc_time:
+ * struct time: struct rtc_time:
* tm_mon 0 ... 11 1 ... 12
* tm_year years since 1900 years since 0
*/
diff --git a/include/s_record.h b/include/s_record.h
index 07806d5..29d40b3 100644
--- a/include/s_record.h
+++ b/include/s_record.h
@@ -97,9 +97,9 @@
#define SREC_DATA3 2 /* Data Record with 3 byte address */
#define SREC_DATA4 3 /* Data Record with 4 byte address */
#define SREC_COUNT 5 /* Count Record (previously transmitted) */
-#define SREC_END4 7 /* End Record with 4 byte start address */
-#define SREC_END3 8 /* End Record with 3 byte start address */
-#define SREC_END2 9 /* End Record with 2 byte start address */
+#define SREC_END4 7 /* End Record with 4 byte start address */
+#define SREC_END3 8 /* End Record with 3 byte start address */
+#define SREC_END2 9 /* End Record with 2 byte start address */
#define SREC_EMPTY 10 /* Empty Record without any data */
#define SREC_REC_OK SREC_EMPTY /* last code without error condition */
diff --git a/include/scsi.h b/include/scsi.h
index 2be4d40..aaafc9c 100644
--- a/include/scsi.h
+++ b/include/scsi.h
@@ -32,7 +32,7 @@ typedef struct SCSI_cmd_block{
unsigned char lun; /* Target LUN */
unsigned char cmdlen; /* command len */
unsigned long datalen; /* Total data length */
- unsigned char * pdata; /* pointer to data */
+ unsigned char * pdata; /* pointer to data */
unsigned char msgout[12]; /* Messge out buffer (NOT USED) */
unsigned char msgin[12]; /* Message in buffer */
unsigned char sensecmdlen; /* Sense command len */
@@ -77,7 +77,7 @@ typedef struct SCSI_cmd_block{
#define M_HEAD_TAG (0x21)
#define M_ORDERED_TAG (0x22)
#define M_IGN_RESIDUE (0x23)
-#define M_IDENTIFY (0x80)
+#define M_IDENTIFY (0x80)
#define M_X_MODIFY_DP (0x00)
#define M_X_SYNC_REQ (0x01)
@@ -192,7 +192,7 @@ void scsi_init(void);
/* Hardware errors */
#define SCSI_SEL_TIME_OUT 0x00000101 /* Selection time out */
#define SCSI_HNS_TIME_OUT 0x00000102 /* Handshake */
-#define SCSI_MA_TIME_OUT 0x00000103 /* Phase error */
+#define SCSI_MA_TIME_OUT 0x00000103 /* Phase error */
#define SCSI_UNEXP_DIS 0x00000104 /* unexpected disconnect */
#define SCSI_INT_STATE 0x00010000 /* unknown Interrupt number is stored in 16 LSB */
diff --git a/include/sed13806.h b/include/sed13806.h
index 216e788..07f4576 100644
--- a/include/sed13806.h
+++ b/include/sed13806.h
@@ -34,7 +34,7 @@
#define DEFAULT_VIDEO_MEMORY_SIZE 0x140000 /* Video Memory Size */
-#define HWCURSORSIZE 1024 /* Size of memory reserved
+#define HWCURSORSIZE 1024 /* Size of memory reserved
for HW cursor*/
/* Offset of chipset registers */
diff --git a/include/spartan2.h b/include/spartan2.h
index bd159e1..7327857 100644
--- a/include/spartan2.h
+++ b/include/spartan2.h
@@ -47,7 +47,7 @@ typedef struct {
Xilinx_busy_fn busy;
Xilinx_abort_fn abort;
Xilinx_post_fn post;
- int relocated;
+ int relocated;
} Xilinx_Spartan2_Slave_Parallel_fns;
/* Slave Serial Implementation function table */
@@ -59,18 +59,18 @@ typedef struct {
Xilinx_done_fn done;
Xilinx_wr_fn wr;
Xilinx_post_fn post;
- int relocated;
+ int relocated;
} Xilinx_Spartan2_Slave_Serial_fns;
/* Device Image Sizes
*********************************************************************/
/* Spartan-II (2.5V) */
-#define XILINX_XC2S15_SIZE 197728/8
-#define XILINX_XC2S30_SIZE 336800/8
-#define XILINX_XC2S50_SIZE 559232/8
-#define XILINX_XC2S100_SIZE 781248/8
-#define XILINX_XC2S150_SIZE 1040128/8
-#define XILINX_XC2S200_SIZE 1335872/8
+#define XILINX_XC2S15_SIZE 197728/8
+#define XILINX_XC2S30_SIZE 336800/8
+#define XILINX_XC2S50_SIZE 559232/8
+#define XILINX_XC2S100_SIZE 781248/8
+#define XILINX_XC2S150_SIZE 1040128/8
+#define XILINX_XC2S200_SIZE 1335872/8
/* Spartan-IIE (1.8V) */
#define XILINX_XC2S50E_SIZE 630048/8
diff --git a/include/spartan3.h b/include/spartan3.h
index c203eeb..9a3a5d4 100644
--- a/include/spartan3.h
+++ b/include/spartan3.h
@@ -47,7 +47,7 @@ typedef struct {
Xilinx_busy_fn busy;
Xilinx_abort_fn abort;
Xilinx_post_fn post;
- int relocated;
+ int relocated;
} Xilinx_Spartan3_Slave_Parallel_fns;
/* Slave Serial Implementation function table */
@@ -59,20 +59,20 @@ typedef struct {
Xilinx_done_fn done;
Xilinx_wr_fn wr;
Xilinx_post_fn post;
- int relocated;
+ int relocated;
} Xilinx_Spartan3_Slave_Serial_fns;
/* Device Image Sizes
*********************************************************************/
/* Spartan-III (1.2V) */
-#define XILINX_XC3S50_SIZE 439264/8
-#define XILINX_XC3S200_SIZE 1047616/8
-#define XILINX_XC3S400_SIZE 1699136/8
-#define XILINX_XC3S1000_SIZE 3223488/8
-#define XILINX_XC3S1500_SIZE 5214784/8
-#define XILINX_XC3S2000_SIZE 7673024/8
-#define XILINX_XC3S4000_SIZE 11316864/8
-#define XILINX_XC3S5000_SIZE 13271936/8
+#define XILINX_XC3S50_SIZE 439264/8
+#define XILINX_XC3S200_SIZE 1047616/8
+#define XILINX_XC3S400_SIZE 1699136/8
+#define XILINX_XC3S1000_SIZE 3223488/8
+#define XILINX_XC3S1500_SIZE 5214784/8
+#define XILINX_XC3S2000_SIZE 7673024/8
+#define XILINX_XC3S4000_SIZE 11316864/8
+#define XILINX_XC3S5000_SIZE 13271936/8
/* Spartan-3E (v3.4) */
#define XILINX_XC3S100E_SIZE 581344/8
@@ -82,7 +82,7 @@ typedef struct {
#define XILINX_XC3S1600E_SIZE 5969696/8
/* Spartan-IIIE (1.2V) */
-#define XILINX_XC3S1200E_SIZE 3841184/8
+#define XILINX_XC3S1200E_SIZE 3841184/8
/* Descriptor Macros
*********************************************************************/
diff --git a/include/sym53c8xx.h b/include/sym53c8xx.h
index 0734fe4..7d3ded5 100644
--- a/include/sym53c8xx.h
+++ b/include/sym53c8xx.h
@@ -33,7 +33,7 @@
#define SCNTL0 0x00 /* full arb., ena parity, par->ATN */
#define SCNTL1 0x01 /* no reset */
- #define ISCON 0x10 /* connected to scsi */
+ #define ISCON 0x10 /* connected to scsi */
#define CRST 0x08 /* force reset */
#define IARB 0x02 /* immediate arbitration */
@@ -128,7 +128,7 @@
#define CTEST3 0x1b
#define FLF 0x08 /* cmd: flush dma fifo */
- #define CLF 0x04 /* cmd: clear dma fifo */
+ #define CLF 0x04 /* cmd: clear dma fifo */
#define FM 0x02 /* mod: fetch pin mode */
#define WRIE 0x01 /* mod: write and invalidate enable */
/* bits 4-7 rsvd for C1010 */
@@ -219,7 +219,7 @@
#define SIDL 0x50 /* Lowlevel: latched from scsi data */
#define STEST4 0x52
- #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
+ #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
#define SMODE_HVD 0x40 /* High Voltage Differential */
#define SMODE_SE 0x80 /* Single Ended */
#define SMODE_LVD 0xc0 /* Low Voltage Differential */
@@ -435,7 +435,7 @@
** LOAD_REG (reg, data) reg = <data>
** << 0 >>
**
-** LOAD_SFBR(data) SFBR = <data>
+** LOAD_SFBR(data) SFBR = <data>
** << 0 >>
**
**-----------------------------------------------------------
diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h
index 9df62f4..039d245 100644
--- a/include/usbdcore_mpc8xx.h
+++ b/include/usbdcore_mpc8xx.h
@@ -176,7 +176,7 @@ typedef struct endpoint_parameter_block_pointer{
char rfcr; /* Rx Function code */
char tfcr; /* Tx Function code */
ushort mrblr; /* Maximum Receive Buffer Length */
- ushort rbptr; /* RxBD pointer Next Buffer Descriptor */
+ ushort rbptr; /* RxBD pointer Next Buffer Descriptor */
ushort tbptr; /* TxBD pointer Next Buffer Descriptor */
ulong tstate; /* Transmit internal state */
ulong tptr; /* Transmit internal data pointer */
diff --git a/include/video_easylogo.h b/include/video_easylogo.h
index 1e00818..ce93868 100644
--- a/include/video_easylogo.h
+++ b/include/video_easylogo.h
@@ -15,7 +15,7 @@
#endif
typedef struct {
- unsigned char *data;
+ unsigned char *data;
int width;
int height;
int bpp;
diff --git a/include/video_logo.h b/include/video_logo.h
index c12e8f8..a0d2da4 100644
--- a/include/video_logo.h
+++ b/include/video_logo.h
@@ -4,9 +4,9 @@
/* To use this, include it and call: easylogo_plot(screen,&u_boot_logo, width,x,y) */
/* */
/* Where: 'screen' is the pointer to the frame buffer */
-/* 'width' is the screen width */
-/* 'x' is the horizontal position */
-/* 'y' is the vertical position */
+/* 'width' is the screen width */
+/* 'x' is the horizontal position */
+/* 'y' is the vertical position */
/* */
#include <video_easylogo.h>
diff --git a/include/virtex2.h b/include/virtex2.h
index f59227b..d116647 100644
--- a/include/virtex2.h
+++ b/include/virtex2.h
@@ -50,7 +50,7 @@ typedef struct {
Xilinx_busy_fn busy;
Xilinx_abort_fn abort;
Xilinx_post_fn post;
- int relocated;
+ int relocated;
} Xilinx_Virtex2_Slave_SelectMap_fns;
/* Slave Serial Implementation function table */
@@ -59,7 +59,7 @@ typedef struct {
Xilinx_clk_fn clk;
Xilinx_rdata_fn rdata;
Xilinx_wdata_fn wdata;
- int relocated;
+ int relocated;
} Xilinx_Virtex2_Slave_Serial_fns;
/* Device Image Sizes (in bytes)
@@ -116,5 +116,3 @@ typedef struct {
{ Xilinx_Virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie }
#endif /* _VIRTEX2_H_ */
-
-/* vim: set ts=4 tw=78: */
diff --git a/include/xilinx.h b/include/xilinx.h
index 95ebe3d..ad33e1f 100644
--- a/include/xilinx.h
+++ b/include/xilinx.h
@@ -29,55 +29,55 @@
/* Xilinx Model definitions
*********************************************************************/
-#define CFG_SPARTAN2 CFG_FPGA_DEV( 0x1 )
-#define CFG_VIRTEX_E CFG_FPGA_DEV( 0x2 )
+#define CFG_SPARTAN2 CFG_FPGA_DEV( 0x1 )
+#define CFG_VIRTEX_E CFG_FPGA_DEV( 0x2 )
#define CFG_VIRTEX2 CFG_FPGA_DEV( 0x4 )
-#define CFG_SPARTAN3 CFG_FPGA_DEV( 0x8 )
-#define CFG_XILINX_SPARTAN2 (CFG_FPGA_XILINX | CFG_SPARTAN2)
-#define CFG_XILINX_VIRTEX_E (CFG_FPGA_XILINX | CFG_VIRTEX_E)
+#define CFG_SPARTAN3 CFG_FPGA_DEV( 0x8 )
+#define CFG_XILINX_SPARTAN2 (CFG_FPGA_XILINX | CFG_SPARTAN2)
+#define CFG_XILINX_VIRTEX_E (CFG_FPGA_XILINX | CFG_VIRTEX_E)
#define CFG_XILINX_VIRTEX2 (CFG_FPGA_XILINX | CFG_VIRTEX2)
-#define CFG_XILINX_SPARTAN3 (CFG_FPGA_XILINX | CFG_SPARTAN3)
+#define CFG_XILINX_SPARTAN3 (CFG_FPGA_XILINX | CFG_SPARTAN3)
/* XXX - Add new models here */
/* Xilinx Interface definitions
*********************************************************************/
-#define CFG_XILINX_IF_SS CFG_FPGA_IF( 0x1 ) /* slave serial */
+#define CFG_XILINX_IF_SS CFG_FPGA_IF( 0x1 ) /* slave serial */
#define CFG_XILINX_IF_MS CFG_FPGA_IF( 0x2 ) /* master serial */
-#define CFG_XILINX_IF_SP CFG_FPGA_IF( 0x4 ) /* slave parallel */
-#define CFG_XILINX_IF_JTAG CFG_FPGA_IF( 0x8 ) /* jtag */
+#define CFG_XILINX_IF_SP CFG_FPGA_IF( 0x4 ) /* slave parallel */
+#define CFG_XILINX_IF_JTAG CFG_FPGA_IF( 0x8 ) /* jtag */
#define CFG_XILINX_IF_MSM CFG_FPGA_IF( 0x10 ) /* master selectmap */
#define CFG_XILINX_IF_SSM CFG_FPGA_IF( 0x20 ) /* slave selectmap */
/* Xilinx types
*********************************************************************/
-typedef enum { /* typedef Xilinx_iface */
- min_xilinx_iface_type, /* low range check value */
- slave_serial, /* serial data and external clock */
- master_serial, /* serial data w/ internal clock (not used) */
- slave_parallel, /* parallel data w/ external latch */
- jtag_mode, /* jtag/tap serial (not used ) */
- master_selectmap, /* master SelectMap (virtex2) */
- slave_selectmap, /* slave SelectMap (virtex2) */
- max_xilinx_iface_type /* insert all new types before this */
-} Xilinx_iface; /* end, typedef Xilinx_iface */
+typedef enum { /* typedef Xilinx_iface */
+ min_xilinx_iface_type, /* low range check value */
+ slave_serial, /* serial data and external clock */
+ master_serial, /* serial data w/ internal clock (not used) */
+ slave_parallel, /* parallel data w/ external latch */
+ jtag_mode, /* jtag/tap serial (not used ) */
+ master_selectmap, /* master SelectMap (virtex2) */
+ slave_selectmap, /* slave SelectMap (virtex2) */
+ max_xilinx_iface_type /* insert all new types before this */
+} Xilinx_iface; /* end, typedef Xilinx_iface */
-typedef enum { /* typedef Xilinx_Family */
- min_xilinx_type, /* low range check value */
- Xilinx_Spartan2, /* Spartan-II Family */
- Xilinx_VirtexE, /* Virtex-E Family */
- Xilinx_Virtex2, /* Virtex2 Family */
- Xilinx_Spartan3, /* Spartan-III Family */
- max_xilinx_type /* insert all new types before this */
-} Xilinx_Family; /* end, typedef Xilinx_Family */
+typedef enum { /* typedef Xilinx_Family */
+ min_xilinx_type, /* low range check value */
+ Xilinx_Spartan2, /* Spartan-II Family */
+ Xilinx_VirtexE, /* Virtex-E Family */
+ Xilinx_Virtex2, /* Virtex2 Family */
+ Xilinx_Spartan3, /* Spartan-III Family */
+ max_xilinx_type /* insert all new types before this */
+} Xilinx_Family; /* end, typedef Xilinx_Family */
-typedef struct { /* typedef Xilinx_desc */
- Xilinx_Family family; /* part type */
- Xilinx_iface iface; /* interface type */
- size_t size; /* bytes of data part can accept */
- void * iface_fns; /* interface function table */
- int cookie; /* implementation specific cookie */
-} Xilinx_desc; /* end, typedef Xilinx_desc */
+typedef struct { /* typedef Xilinx_desc */
+ Xilinx_Family family; /* part type */
+ Xilinx_iface iface; /* interface type */
+ size_t size; /* bytes of data part can accept */
+ void *iface_fns; /* interface function table */
+ int cookie; /* implementation specific cookie */
+} Xilinx_desc; /* end, typedef Xilinx_desc */
/* Generic Xilinx Functions
*********************************************************************/
diff --git a/lib_arm/Makefile b/lib_arm/Makefile
index 12a8748..c8795b2 100644
--- a/lib_arm/Makefile
+++ b/lib_arm/Makefile
@@ -38,7 +38,7 @@ COBJS-y += cache.o
COBJS-y += div0.o
COBJS-y += interrupts.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_arm/_udivsi3.S b/lib_arm/_udivsi3.S
index 2cdcd48..a3f9b59 100644
--- a/lib_arm/_udivsi3.S
+++ b/lib_arm/_udivsi3.S
@@ -61,7 +61,7 @@ Loop3:
bne Loop3
Lgot_result:
mov r0, result
- mov pc, lr
+ mov pc, lr
Ldiv0:
str lr, [sp, #-4]!
bl __div0 (PLT)
diff --git a/lib_arm/_umodsi3.S b/lib_arm/_umodsi3.S
index e4aebe8..8465ef0 100644
--- a/lib_arm/_umodsi3.S
+++ b/lib_arm/_umodsi3.S
@@ -19,7 +19,7 @@ curbit .req r3
beq Ldiv0
mov curbit, #1
cmp dividend, divisor
- movcc pc, lr
+ movcc pc, lr
Loop1:
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@@ -66,14 +66,14 @@ Loop3:
@ then none of the below will match, since the bit in ip will not be
@ in the bottom nibble.
ands overdone, overdone, #0xe0000000
- moveq pc, lr @ No fixups needed
+ moveq pc, lr @ No fixups needed
tst overdone, ip, ror #3
addne dividend, dividend, divisor, lsr #3
tst overdone, ip, ror #2
addne dividend, dividend, divisor, lsr #2
tst overdone, ip, ror #1
addne dividend, dividend, divisor, lsr #1
- mov pc, lr
+ mov pc, lr
Ldiv0:
str lr, [sp, #-4]!
bl __div0 (PLT)
diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile
index 3617104..3f69770 100644
--- a/lib_blackfin/Makefile
+++ b/lib_blackfin/Makefile
@@ -44,7 +44,7 @@ COBJS-y += post.o
COBJS-y += string.o
COBJS-y += tests.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_generic/Makefile b/lib_generic/Makefile
index abee19a..dca3a6c 100644
--- a/lib_generic/Makefile
+++ b/lib_generic/Makefile
@@ -43,7 +43,7 @@ COBJS-y += vsprintf.o
COBJS-y += zlib.o
COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
+SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_generic/string.c b/lib_generic/string.c
index e0b793a..181eda6 100644
--- a/lib_generic/string.c
+++ b/lib_generic/string.c
@@ -263,7 +263,7 @@ char * strdup(const char *s)
#ifndef __HAVE_ARCH_STRSPN
/**
* strspn - Calculate the length of the initial substring of @s which only
- * contain letters in @accept
+ * contain letters in @accept
* @s: The string to be searched
* @accept: The string to search for
*/
diff --git a/lib_generic/zlib.c b/lib_generic/zlib.c
index 668ac8f..2b01c8f 100644
--- a/lib_generic/zlib.c
+++ b/lib_generic/zlib.c
@@ -1115,7 +1115,7 @@ z_stream *z;
n -= t;
z->total_out += t;
s->read = q; /* drag read pointer forward */
-/* WRAP */ /* expand WRAP macro by hand to handle s->read */
+/* WRAP */ /* expand WRAP macro by hand to handle s->read */
if (q == s->end) {
s->read = q = s->window;
m = WAVAIL;
diff --git a/lib_i386/Makefile b/lib_i386/Makefile
index 4cc29f4..4fbcd08 100644
--- a/lib_i386/Makefile
+++ b/lib_i386/Makefile
@@ -39,7 +39,7 @@ COBJS-y += video_bios.o
COBJS-y += video.o
COBJS-y += zimage.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_i386/bios.S b/lib_i386/bios.S
index 4606419..d6ca3e3 100644
--- a/lib_i386/bios.S
+++ b/lib_i386/bios.S
@@ -248,7 +248,7 @@ Lhandeled:
/*
************************************************************
- * BIOS interrupt 10h -- VGA services
+ * BIOS interrupt 10h -- VGA services
************************************************************
*/
bios_10h:
@@ -293,7 +293,7 @@ gs movw %ax, OFFS_AX(%bp)
/*
************************************************************
- * BIOS interrupt 12h -- Get Memory Size
+ * BIOS interrupt 12h -- Get Memory Size
************************************************************
*/
bios_12h:
@@ -352,7 +352,7 @@ gs movw OFFS_AX(%bp), %ax
movw $0xffff, %ax
ret
-Lfunc_c0h: /* Return System Configuration Parameters (PS2 only) */
+Lfunc_c0h: /* Return System Configuration Parameters (PS2 only) */
gs movw OFFS_FLAGS(%bp), %ax
orw $1, %ax /* return carry -- function not supported */
gs movw %ax, OFFS_FLAGS(%bp)
@@ -377,7 +377,7 @@ cs movw ram_in_64kb_chunks, %ax
shlw $6, %ax /* multiply by 64 */
subw $0x400, %ax /* 1st meg does not count */
-gs movw %ax, OFFS_AX(%bp) /* return memory size between 1M and 16M in 1kb chunks in AX and CX */
+gs movw %ax, OFFS_AX(%bp) /* return memory size between 1M and 16M in 1kb chunks in AX and CX */
gs movw %ax, OFFS_CX(%bp)
gs movw $0, OFFS_BX(%bp) /* set BX and DX to 0*/
gs movw $0, OFFS_DX(%bp)
@@ -455,8 +455,8 @@ Lfunc_b1h:
.globl ram_in_64kb_chunks
ram_in_64kb_chunks:
- .word 0
+ .word 0
.globl bios_equipment
bios_equipment:
- .word 0
+ .word 0
diff --git a/lib_i386/bios.h b/lib_i386/bios.h
index 59143dd..4901f89 100644
--- a/lib_i386/bios.h
+++ b/lib_i386/bios.h
@@ -57,7 +57,7 @@
#define OFFS_FLAGS 44 /* 16bit */
#define SEGMENT 0x40
-#define STACK 0x800 /* stack at 0x40:0x800 -> 0x800 */
+#define STACK 0x800 /* stack at 0x40:0x800 -> 0x800 */
/* save general registers */
/* save some segments */
diff --git a/lib_i386/bios_pci.S b/lib_i386/bios_pci.S
index b57b726..67fd00b 100644
--- a/lib_i386/bios_pci.S
+++ b/lib_i386/bios_pci.S
@@ -84,14 +84,14 @@ gs movb %al, OFFS_AL(%bp) /* We support cfg type 1 */
gs movw %ax, OFFS_BX(%bp)
cs movb pci_last_bus, %al /* last bus number */
gs movb %al, OFFS_CL(%bp)
- jmp clear_carry
+ jmp clear_carry
/*****************************************************************************/
/* device 0-31, function 0-7 */
pci_bios_find_device:
#ifdef PCI_BIOS_DEBUG
-cs incl num_pci_bios_find_device
+cs incl num_pci_bios_find_device
#endif
gs movw OFFS_CX(%bp), %di
shll $16, %edi
@@ -214,12 +214,12 @@ pci_bios_read_cfg_byte:
cs incl num_pci_bios_read_cfg_byte
#endif
call pci_bios_select_register
-gs movw OFFS_DI(%bp), %dx
+gs movw OFFS_DI(%bp), %dx
andw $3, %dx
addw $0xcfc, %dx
inb %dx, %al
gs movb %al, OFFS_CL(%bp)
- jmp clear_carry
+ jmp clear_carry
/*****************************************************************************/
@@ -228,12 +228,12 @@ pci_bios_read_cfg_word:
cs incl num_pci_bios_read_cfg_word
#endif
call pci_bios_select_register
-gs movw OFFS_DI(%bp), %dx
+gs movw OFFS_DI(%bp), %dx
andw $2, %dx
addw $0xcfc, %dx
inw %dx, %ax
gs movw %ax, OFFS_CX(%bp)
- jmp clear_carry
+ jmp clear_carry
/*****************************************************************************/
@@ -246,7 +246,7 @@ cs incl num_pci_bios_read_cfg_dword
movw $0xcfc, %dx
inl %dx, %eax
gs movl %eax, OFFS_ECX(%bp)
- jmp clear_carry
+ jmp clear_carry
/*****************************************************************************/
@@ -255,12 +255,12 @@ pci_bios_write_cfg_byte:
cs incl num_pci_bios_write_cfg_byte
#endif
call pci_bios_select_register
-gs movw OFFS_DI(%bp), %dx
+gs movw OFFS_DI(%bp), %dx
gs movb OFFS_CL(%bp), %al
andw $3, %dx
addw $0xcfc, %dx
outb %al, %dx
- jmp clear_carry
+ jmp clear_carry
/*****************************************************************************/
@@ -269,12 +269,12 @@ pci_bios_write_cfg_word:
cs incl num_pci_bios_write_cfg_word
#endif
call pci_bios_select_register
-gs movw OFFS_DI(%bp), %dx
+gs movw OFFS_DI(%bp), %dx
gs movw OFFS_CX(%bp), %ax
andw $2, %dx
addw $0xcfc, %dx
outw %ax, %dx
- jmp clear_carry
+ jmp clear_carry
/*****************************************************************************/
@@ -286,7 +286,7 @@ cs incl num_pci_bios_write_cfg_dword
gs movl OFFS_ECX(%bp), %eax
movw $0xcfc, %dx
outl %eax, %dx
- jmp clear_carry
+ jmp clear_carry
/*****************************************************************************/
@@ -318,8 +318,8 @@ cs incl num_pci_bios_unknown_function
/*****************************************************************************/
pci_bios_select_register:
-gs movw OFFS_BX(%bp), %bx
-gs movw OFFS_DI(%bp), %ax
+gs movw OFFS_BX(%bp), %bx
+gs movw OFFS_DI(%bp), %ax
/* destroys eax, dx */
__pci_bios_select_register: /* BX holds device id, AX holds register index */
pushl %ebx
@@ -354,20 +354,20 @@ gs movw %ax, OFFS_FLAGS(%bp)
.globl pci_last_bus
pci_last_bus:
- .byte 0
+ .byte 0
#ifdef PCI_BIOS_DEBUG
.globl num_pci_bios_present
num_pci_bios_present:
- .long 0
+ .long 0
.globl num_pci_bios_find_device
num_pci_bios_find_device:
- .long 0
+ .long 0
.globl num_pci_bios_find_class
num_pci_bios_find_class:
- .long 0
+ .long 0
.globl num_pci_bios_generate_special_cycle
num_pci_bios_generate_special_cycle:
@@ -375,37 +375,37 @@ num_pci_bios_generate_special_cycle:
.globl num_pci_bios_read_cfg_byte
num_pci_bios_read_cfg_byte:
- .long 0
+ .long 0
.globl num_pci_bios_read_cfg_word
num_pci_bios_read_cfg_word:
- .long 0
+ .long 0
.globl num_pci_bios_read_cfg_dword
num_pci_bios_read_cfg_dword:
- .long 0
+ .long 0
.globl num_pci_bios_write_cfg_byte
num_pci_bios_write_cfg_byte:
- .long 0
+ .long 0
.globl num_pci_bios_write_cfg_word
num_pci_bios_write_cfg_word:
- .long 0
+ .long 0
.globl num_pci_bios_write_cfg_dword
num_pci_bios_write_cfg_dword:
- .long 0
+ .long 0
.globl num_pci_bios_get_irq_routing
num_pci_bios_get_irq_routing:
- .long 0
+ .long 0
.globl num_pci_bios_set_irq
num_pci_bios_set_irq:
- .long 0
+ .long 0
.globl num_pci_bios_unknown_function
num_pci_bios_unknown_function:
- .long 0
+ .long 0
#endif
diff --git a/lib_i386/pci.c b/lib_i386/pci.c
index a7f16aa..4331b04 100644
--- a/lib_i386/pci.c
+++ b/lib_i386/pci.c
@@ -52,7 +52,7 @@ int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
pci_read_config_word(dev, PCI_DEVICE_ID, &device);
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_code);
- class_code &= 0xffffff00;
+ class_code &= 0xffffff00;
class_code >>= 8;
#if 0
@@ -103,7 +103,7 @@ int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
printf("%s\n",
(readw(pci_data+0x15) &0x80)?
"Last image":"More images follow");
- switch (readb(pci_data+0x14)) {
+ switch (readb(pci_data+0x14)) {
case 0:
printf("X86 code\n");
break;
diff --git a/lib_i386/pci_type1.c b/lib_i386/pci_type1.c
index 5dfa8ab..8da8c1c 100644
--- a/lib_i386/pci_type1.c
+++ b/lib_i386/pci_type1.c
@@ -20,14 +20,14 @@
#define cfg_read(val, addr, op) *val = op((int)(addr))
#define cfg_write(val, addr, op) op((val), (int)(addr))
-#define TYPE1_PCI_OP(rw, size, type, op, mask) \
-static int \
-type1_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, int offset, type val) \
-{ \
- outl(dev | (offset & 0xfc) | 0x80000000, (int)hose->cfg_addr); \
- cfg_##rw(val, hose->cfg_data + (offset & mask), op); \
- return 0; \
+#define TYPE1_PCI_OP(rw, size, type, op, mask) \
+static int \
+type1_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, int offset, type val) \
+{ \
+ outl(dev | (offset & 0xfc) | 0x80000000, (int)hose->cfg_addr); \
+ cfg_##rw(val, hose->cfg_data + (offset & mask), op); \
+ return 0; \
}
diff --git a/lib_i386/realmode_switch.S b/lib_i386/realmode_switch.S
index 0433cd4..d6c74ec 100644
--- a/lib_i386/realmode_switch.S
+++ b/lib_i386/realmode_switch.S
@@ -26,7 +26,7 @@
/*
* Stack frame at 0xe00
- * e00 ebx;
+ * e00 ebx;
* e04 ecx;
* e08 edx;
* e0c esi;
@@ -56,13 +56,13 @@ realmode_enter:
o32 pusha
o32 pushf
cli
- sidt saved_idt
- sgdt saved_gdt
- movl %esp, %eax
- movl %eax, saved_protected_mode_esp
+ sidt saved_idt
+ sgdt saved_gdt
+ movl %esp, %eax
+ movl %eax, saved_protected_mode_esp
movl $0x10, %eax
- movl %eax, %esp
+ movl %eax, %esp
movw $0x28, %ax
movw %ax, %ds
movw %ax, %es
@@ -70,10 +70,10 @@ o32 pushf
movw %ax, %gs
lidt realmode_idt_ptr
- movl %cr0, %eax /* Go back into real mode by */
- andl $0x7ffffffe, %eax /* clearing PE to 0 */
+ movl %cr0, %eax /* Go back into real mode by */
+ andl $0x7ffffffe, %eax /* clearing PE to 0 */
movl %eax, %cr0
- ljmp $0x0,$do_realmode /* switch to real mode */
+ ljmp $0x0,$do_realmode /* switch to real mode */
do_realmode: /* realmode code from here */
movw %cs,%ax
@@ -115,20 +115,20 @@ o32 popf
popw %ss
movl %eax, %esp
cs movl temp_eax, %eax
- wbinvd /* self-modifying code,
+ wbinvd /* self-modifying code,
* better flush the cache */
.byte 0x9a /* lcall */
temp_ip:
- .word 0 /* new ip */
+ .word 0 /* new ip */
temp_cs:
- .word 0 /* new cs */
+ .word 0 /* new cs */
realmode_ret:
/* save eax, esp and ss */
cs movl %eax, saved_eax
movl %esp, %eax
cs movl %eax, saved_esp
- movw %ss, %ax
+ movw %ss, %ax
cs movw %ax, saved_ss
/* restore the stack, note that we set sp to 0x244;
@@ -170,26 +170,26 @@ cs movw temp_ip, %ax
pushl %ebx
o32 cs lidt saved_idt
-o32 cs lgdt saved_gdt /* Set GDTR */
+o32 cs lgdt saved_gdt /* Set GDTR */
- movl %cr0, %eax /* Go back into protected mode */
- orl $1,%eax /* reset PE to 1 */
- movl %eax, %cr0
- jmp next_line /* flush prefetch queue */
+ movl %cr0, %eax /* Go back into protected mode */
+ orl $1,%eax /* reset PE to 1 */
+ movl %eax, %cr0
+ jmp next_line /* flush prefetch queue */
next_line:
movw $return_ptr, %ax
- movw %ax,%bp
+ movw %ax,%bp
o32 cs ljmp *(%bp)
.code32
protected_mode:
- movl $0x18,%eax /* reload GDT[3] */
- movw %ax,%fs /* reset FS */
- movw %ax,%ds /* reset DS */
- movw %ax,%gs /* reset GS */
- movw %ax,%es /* reset ES */
- movw %ax,%ss /* reset SS */
- movl saved_protected_mode_esp, %eax
+ movl $0x18,%eax /* reload GDT[3] */
+ movw %ax,%fs /* reset FS */
+ movw %ax,%ds /* reset DS */
+ movw %ax,%gs /* reset GS */
+ movw %ax,%es /* reset ES */
+ movw %ax,%ss /* reset SS */
+ movl saved_protected_mode_esp, %eax
movl %eax, %esp
popf
popa
@@ -199,7 +199,7 @@ temp_eax:
.long 0
saved_ss:
- .word 0
+ .word 0
saved_esp:
.long 0
saved_eax:
@@ -210,12 +210,12 @@ realmode_idt_ptr:
.word 0x0, 0x0
saved_gdt:
- .word 0, 0, 0, 0
+ .word 0, 0, 0, 0
saved_idt:
- .word 0, 0, 0, 0
+ .word 0, 0, 0, 0
saved_protected_mode_esp:
- .long 0
+ .long 0
return_ptr:
.long protected_mode
diff --git a/lib_m68k/Makefile b/lib_m68k/Makefile
index f6924cd..6db35ed 100644
--- a/lib_m68k/Makefile
+++ b/lib_m68k/Makefile
@@ -34,7 +34,7 @@ COBJS-y += interrupts.o
COBJS-y += time.o
COBJS-y += traps.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 6654f97..ae942e5 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -354,7 +354,7 @@ board_init_f (ulong bootflag)
debug ("Reserving %d Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
- /* Reserve memory for boot params. */
+ /* Reserve memory for boot params. */
addr_sp -= CFG_BOOTPARAMS_LEN;
bd->bi_boot_params = addr_sp;
debug ("Reserving %dk for boot parameters at: %08lx\n",
diff --git a/lib_microblaze/Makefile b/lib_microblaze/Makefile
index 141b082..9b0f296 100644
--- a/lib_microblaze/Makefile
+++ b/lib_microblaze/Makefile
@@ -32,7 +32,7 @@ COBJS-y += bootm.o
COBJS-y += cache.o
COBJS-y += time.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_mips/Makefile b/lib_mips/Makefile
index 799eaf2..8176437 100644
--- a/lib_mips/Makefile
+++ b/lib_mips/Makefile
@@ -31,7 +31,7 @@ COBJS-y += board.o
COBJS-y += bootm.o
COBJS-y += time.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_nios/Makefile b/lib_nios/Makefile
index c41d981..f66e989 100644
--- a/lib_nios/Makefile
+++ b/lib_nios/Makefile
@@ -34,7 +34,7 @@ COBJS-y += divmod.o
COBJS-y += mult.o
COBJS-y += time.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_nios/math.h b/lib_nios/math.h
index ccffbbc..f0aed8e 100644
--- a/lib_nios/math.h
+++ b/lib_nios/math.h
@@ -1,6 +1,6 @@
#define BITS_PER_UNIT 8
-typedef int HItype __attribute__ ((mode (HI)));
+typedef int HItype __attribute__ ((mode (HI)));
typedef unsigned int UHItype __attribute__ ((mode (HI)));
typedef int SItype __attribute__ ((mode (SI)));
diff --git a/lib_nios2/Makefile b/lib_nios2/Makefile
index 717aa9b..b69bc38 100644
--- a/lib_nios2/Makefile
+++ b/lib_nios2/Makefile
@@ -33,7 +33,7 @@ COBJS-y += divmod.o
COBJS-y += mult.o
COBJS-y += time.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_nios2/math.h b/lib_nios2/math.h
index ccffbbc..f0aed8e 100644
--- a/lib_nios2/math.h
+++ b/lib_nios2/math.h
@@ -1,6 +1,6 @@
#define BITS_PER_UNIT 8
-typedef int HItype __attribute__ ((mode (HI)));
+typedef int HItype __attribute__ ((mode (HI)));
typedef unsigned int UHItype __attribute__ ((mode (HI)));
typedef int SItype __attribute__ ((mode (SI)));
diff --git a/lib_ppc/Makefile b/lib_ppc/Makefile
index 3d76b70..60ea0c9 100644
--- a/lib_ppc/Makefile
+++ b/lib_ppc/Makefile
@@ -38,7 +38,7 @@ COBJS-y += interrupts.o
COBJS-y += kgdb.o
COBJS-y += time.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_sh/Makefile b/lib_sh/Makefile
index a5772a0..0e4fdee 100644
--- a/lib_sh/Makefile
+++ b/lib_sh/Makefile
@@ -28,7 +28,7 @@ COBJS-y += board.o
COBJS-y += bootm.o
#COBJS-y += time.o
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
diff --git a/lib_sparc/Makefile b/lib_sparc/Makefile
index 1a354b6..040ca10 100644
--- a/lib_sparc/Makefile
+++ b/lib_sparc/Makefile
@@ -29,7 +29,7 @@ SOBJS =
COBJS = board.o cache.o interrupts.o time.o bootm.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
diff --git a/libfdt/Makefile b/libfdt/Makefile
index d166cce..ca2ad76 100644
--- a/libfdt/Makefile
+++ b/libfdt/Makefile
@@ -30,7 +30,7 @@ SOBJS =
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o
COBJS := $(COBJS-y)
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
diff --git a/libfdt/README b/libfdt/README
index f4cca34..e059876 100644
--- a/libfdt/README
+++ b/libfdt/README
@@ -1,12 +1,12 @@
The libfdt functionality was written by David Gibson. The original
source came from the git repository:
-URL: git://ozlabs.org/home/dgibson/git/libfdt.git
+URL: git://ozlabs.org/home/dgibson/git/libfdt.git
author David Gibson <dgibson@sneetch.(none)>
Fri, 23 Mar 2007 04:16:54 +0000 (15:16 +1100)
committer David Gibson <dgibson@sneetch.(none)>
- Fri, 23 Mar 2007 04:16:54 +0000 (15:16 +1100)
+ Fri, 23 Mar 2007 04:16:54 +0000 (15:16 +1100)
commit 857f54e79f74429af20c2b5ecc00ee98af6a3b8b
tree 2f648f0f88225a51ded452968d28b4402df8ade0
parent 07a12a08005f3b5cd9337900a6551e450c07b515
diff --git a/net/net.c b/net/net.c
index b6dad89..7812877 100644
--- a/net/net.c
+++ b/net/net.c
@@ -169,7 +169,7 @@ ushort NetOurNativeVLAN = 0xFFFF; /* ditto */
char BootFile[128]; /* Boot File name */
#if defined(CONFIG_CMD_PING)
-IPaddr_t NetPingIP; /* the ip address to ping */
+IPaddr_t NetPingIP; /* the ip address to ping */
static void PingStart(void);
#endif
@@ -207,7 +207,7 @@ IPaddr_t NetArpWaitReplyIP;
uchar *NetArpWaitPacketMAC; /* MAC address of waiting packet's destination */
uchar *NetArpWaitTxPacket; /* THE transmit packet */
int NetArpWaitTxPacketSize;
-uchar NetArpWaitPacketBuf[PKTSIZE_ALIGN + PKTALIGN];
+uchar NetArpWaitPacketBuf[PKTSIZE_ALIGN + PKTALIGN];
ulong NetArpWaitTimerStart;
int NetArpWaitTry;
@@ -751,7 +751,7 @@ int PingSend(void)
s = &ip->udp_src; /* XXX ICMP starts here */
s[0] = htons(0x0800); /* echo-request, code */
s[1] = 0; /* checksum */
- s[2] = 0; /* identifier */
+ s[2] = 0; /* identifier */
s[3] = htons(PingSeqNo++); /* sequence number */
s[1] = ~NetCksum((uchar *)s, 8/2);
diff --git a/post/drivers/memory.c b/post/drivers/memory.c
index e94d92c..e32020f 100644
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@ -282,7 +282,7 @@ static int memory_post_addrline(ulong *testaddr, ulong *base, ulong size)
#endif
if(readback == *testaddr) {
post_log ("Memory (address line) error at %08x<->%08x, "
- "XOR value %08x !\n",
+ "XOR value %08x !\n",
testaddr, target, xor);
ret = -1;
}
diff --git a/post/lib_ppc/andi.c b/post/lib_ppc/andi.c
index e3315bf..75ba7a6 100644
--- a/post/lib_ppc/andi.c
+++ b/post/lib_ppc/andi.c
@@ -49,13 +49,13 @@ static struct cpu_post_andi_s
} cpu_post_andi_table[] =
{
{
- OP_ANDI_,
+ OP_ANDI_,
0x80008000,
0xffff,
0x00008000
},
{
- OP_ANDIS_,
+ OP_ANDIS_,
0x80008000,
0xffff,
0x80000000
@@ -79,7 +79,7 @@ int cpu_post_test_andi (void)
unsigned int reg0 = (reg + 0) % 32;
unsigned int reg1 = (reg + 1) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long codecr[] =
+ unsigned long codecr[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -16),
@@ -112,7 +112,7 @@ int cpu_post_test_andi (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/lib_ppc/cmp.c b/post/lib_ppc/cmp.c
index 89f754a..8d80f86 100644
--- a/post/lib_ppc/cmp.c
+++ b/post/lib_ppc/cmp.c
@@ -106,7 +106,7 @@ int cpu_post_test_cmp (void)
for (i = 0; i < cpu_post_cmp_size && ret == 0; i++)
{
struct cpu_post_cmp_s *test = cpu_post_cmp_table + i;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_2C(test->cmd, test->cr, 3, 4),
ASM_MFCR(3),
diff --git a/post/lib_ppc/cmpi.c b/post/lib_ppc/cmpi.c
index 0afdd71..92b4d57 100644
--- a/post/lib_ppc/cmpi.c
+++ b/post/lib_ppc/cmpi.c
@@ -106,7 +106,7 @@ int cpu_post_test_cmpi (void)
for (i = 0; i < cpu_post_cmpi_size && ret == 0; i++)
{
struct cpu_post_cmpi_s *test = cpu_post_cmpi_table + i;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_1IC(test->cmd, test->cr, 3, test->op2),
ASM_MFCR(3),
diff --git a/post/lib_ppc/cpu_asm.h b/post/lib_ppc/cpu_asm.h
index 1cbaf41..ef6fe61 100644
--- a/post/lib_ppc/cpu_asm.h
+++ b/post/lib_ppc/cpu_asm.h
@@ -191,7 +191,7 @@
((imm2) << 6) + \
((imm3) << 1))
#define ASM_1O(opcode, off) ((opcode) + (off))
-#define ASM_3O(opcode, bo, bi, off) ((opcode) + \
+#define ASM_3O(opcode, bo, bi, off) ((opcode) + \
((bo) << 21) + \
((bi) << 16) + \
(off))
diff --git a/post/lib_ppc/rlwimi.c b/post/lib_ppc/rlwimi.c
index 1d8e61e..8662db1 100644
--- a/post/lib_ppc/rlwimi.c
+++ b/post/lib_ppc/rlwimi.c
@@ -53,7 +53,7 @@ static struct cpu_post_rlwimi_s
} cpu_post_rlwimi_table[] =
{
{
- OP_RLWIMI,
+ OP_RLWIMI,
0xff00ffff,
0x0000aa00,
8,
@@ -80,7 +80,7 @@ int cpu_post_test_rlwimi (void)
unsigned int reg0 = (reg + 0) % 32;
unsigned int reg1 = (reg + 1) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -20),
@@ -99,7 +99,7 @@ int cpu_post_test_rlwimi (void)
ASM_LWZ(stk, 1, -4),
ASM_BLR,
};
- unsigned long codecr[] =
+ unsigned long codecr[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -20),
@@ -124,26 +124,26 @@ int cpu_post_test_rlwimi (void)
if (ret == 0)
{
- cr = 0;
- cpu_post_exec_22 (code, & cr, & res, test->op0, test->op1);
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op0, test->op1);
- ret = res == test->res && cr == 0 ? 0 : -1;
+ ret = res == test->res && cr == 0 ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at rlwimi test %d !\n", i);
- }
+ }
}
if (ret == 0)
{
- cpu_post_exec_22 (codecr, & cr, & res, test->op0, test->op1);
+ cpu_post_exec_22 (codecr, & cr, & res, test->op0, test->op1);
- ret = res == test->res &&
+ ret = res == test->res &&
(cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at rlwimi test %d !\n", i);
}
}
@@ -151,7 +151,7 @@ int cpu_post_test_rlwimi (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/lib_ppc/rlwinm.c b/post/lib_ppc/rlwinm.c
index 113e79d..4398a10 100644
--- a/post/lib_ppc/rlwinm.c
+++ b/post/lib_ppc/rlwinm.c
@@ -51,7 +51,7 @@ static struct cpu_post_rlwinm_s
} cpu_post_rlwinm_table[] =
{
{
- OP_RLWINM,
+ OP_RLWINM,
0xffff0000,
24,
16,
@@ -77,7 +77,7 @@ int cpu_post_test_rlwinm (void)
unsigned int reg0 = (reg + 0) % 32;
unsigned int reg1 = (reg + 1) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -16),
@@ -94,7 +94,7 @@ int cpu_post_test_rlwinm (void)
ASM_LWZ(stk, 1, -4),
ASM_BLR,
};
- unsigned long codecr[] =
+ unsigned long codecr[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -16),
@@ -117,26 +117,26 @@ int cpu_post_test_rlwinm (void)
if (ret == 0)
{
- cr = 0;
- cpu_post_exec_21 (code, & cr, & res, test->op1);
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op1);
- ret = res == test->res && cr == 0 ? 0 : -1;
+ ret = res == test->res && cr == 0 ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at rlwinm test %d !\n", i);
- }
+ }
}
if (ret == 0)
{
- cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+ cpu_post_exec_21 (codecr, & cr, & res, test->op1);
- ret = res == test->res &&
+ ret = res == test->res &&
(cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at rlwinm test %d !\n", i);
}
}
@@ -144,7 +144,7 @@ int cpu_post_test_rlwinm (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/lib_ppc/rlwnm.c b/post/lib_ppc/rlwnm.c
index a6684bf..c547bd7 100644
--- a/post/lib_ppc/rlwnm.c
+++ b/post/lib_ppc/rlwnm.c
@@ -52,7 +52,7 @@ static struct cpu_post_rlwnm_s
} cpu_post_rlwnm_table[] =
{
{
- OP_RLWNM,
+ OP_RLWNM,
0xffff0000,
24,
16,
@@ -79,7 +79,7 @@ int cpu_post_test_rlwnm (void)
unsigned int reg1 = (reg + 1) % 32;
unsigned int reg2 = (reg + 2) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -24),
@@ -100,7 +100,7 @@ int cpu_post_test_rlwnm (void)
ASM_LWZ(stk, 1, -4),
ASM_BLR,
};
- unsigned long codecr[] =
+ unsigned long codecr[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -24),
@@ -127,26 +127,26 @@ int cpu_post_test_rlwnm (void)
if (ret == 0)
{
- cr = 0;
- cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
- ret = res == test->res && cr == 0 ? 0 : -1;
+ ret = res == test->res && cr == 0 ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at rlwnm test %d !\n", i);
- }
+ }
}
if (ret == 0)
{
- cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
- ret = res == test->res &&
+ ret = res == test->res &&
(cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at rlwnm test %d !\n", i);
}
}
@@ -154,7 +154,7 @@ int cpu_post_test_rlwnm (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/lib_ppc/srawi.c b/post/lib_ppc/srawi.c
index 8c70007..4a3dddb 100644
--- a/post/lib_ppc/srawi.c
+++ b/post/lib_ppc/srawi.c
@@ -49,13 +49,13 @@ static struct cpu_post_srawi_s
} cpu_post_srawi_table[] =
{
{
- OP_SRAWI,
+ OP_SRAWI,
0x8000,
3,
0x1000
},
{
- OP_SRAWI,
+ OP_SRAWI,
0x80000000,
3,
0xf0000000
@@ -79,7 +79,7 @@ int cpu_post_test_srawi (void)
unsigned int reg0 = (reg + 0) % 32;
unsigned int reg1 = (reg + 1) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -16),
@@ -96,7 +96,7 @@ int cpu_post_test_srawi (void)
ASM_LWZ(stk, 1, -4),
ASM_BLR,
};
- unsigned long codecr[] =
+ unsigned long codecr[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -16),
@@ -118,26 +118,26 @@ int cpu_post_test_srawi (void)
if (ret == 0)
{
- cr = 0;
- cpu_post_exec_21 (code, & cr, & res, test->op1);
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op1);
- ret = res == test->res && cr == 0 ? 0 : -1;
+ ret = res == test->res && cr == 0 ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at srawi test %d !\n", i);
- }
+ }
}
if (ret == 0)
{
- cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+ cpu_post_exec_21 (codecr, & cr, & res, test->op1);
- ret = res == test->res &&
+ ret = res == test->res &&
(cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at srawi test %d !\n", i);
}
}
@@ -145,7 +145,7 @@ int cpu_post_test_srawi (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/lib_ppc/three.c b/post/lib_ppc/three.c
index a7f1a86..3fa513b 100644
--- a/post/lib_ppc/three.c
+++ b/post/lib_ppc/three.c
@@ -53,103 +53,103 @@ static struct cpu_post_three_s
} cpu_post_three_table[] =
{
{
- OP_ADD,
+ OP_ADD,
100,
200,
300
},
{
- OP_ADD,
+ OP_ADD,
100,
-200,
-100
},
{
- OP_ADDC,
+ OP_ADDC,
100,
200,
300
},
{
- OP_ADDC,
+ OP_ADDC,
100,
-200,
-100
},
{
- OP_ADDE,
+ OP_ADDE,
100,
200,
300
},
{
- OP_ADDE,
+ OP_ADDE,
100,
-200,
-100
},
{
- OP_SUBF,
+ OP_SUBF,
100,
200,
100
},
{
- OP_SUBF,
+ OP_SUBF,
300,
200,
-100
},
{
- OP_SUBFC,
+ OP_SUBFC,
100,
200,
100
},
{
- OP_SUBFC,
+ OP_SUBFC,
300,
200,
-100
},
{
- OP_SUBFE,
+ OP_SUBFE,
100,
200,
200 + ~100
},
{
- OP_SUBFE,
+ OP_SUBFE,
300,
200,
200 + ~300
},
{
- OP_MULLW,
+ OP_MULLW,
200,
300,
200 * 300
},
{
- OP_MULHW,
+ OP_MULHW,
0x10000000,
0x10000000,
0x1000000
},
{
- OP_MULHWU,
+ OP_MULHWU,
0x80000000,
0x80000000,
0x40000000
},
{
- OP_DIVW,
+ OP_DIVW,
-20,
5,
-4
},
{
- OP_DIVWU,
+ OP_DIVWU,
0x8000,
0x200,
0x40
@@ -174,7 +174,7 @@ int cpu_post_test_three (void)
unsigned int reg1 = (reg + 1) % 32;
unsigned int reg2 = (reg + 2) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -24),
@@ -195,7 +195,7 @@ int cpu_post_test_three (void)
ASM_LWZ(stk, 1, -4),
ASM_BLR,
};
- unsigned long codecr[] =
+ unsigned long codecr[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -24),
@@ -221,26 +221,26 @@ int cpu_post_test_three (void)
if (ret == 0)
{
- cr = 0;
- cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
- ret = res == test->res && cr == 0 ? 0 : -1;
+ ret = res == test->res && cr == 0 ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at three test %d !\n", i);
- }
+ }
}
if (ret == 0)
{
- cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
- ret = res == test->res &&
+ ret = res == test->res &&
(cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at three test %d !\n", i);
}
}
@@ -248,7 +248,7 @@ int cpu_post_test_three (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/lib_ppc/threei.c b/post/lib_ppc/threei.c
index bbb4f50..89f8fc8 100644
--- a/post/lib_ppc/threei.c
+++ b/post/lib_ppc/threei.c
@@ -51,25 +51,25 @@ static struct cpu_post_threei_s
} cpu_post_threei_table[] =
{
{
- OP_ORI,
+ OP_ORI,
0x80000000,
0xffff,
0x8000ffff
},
{
- OP_ORIS,
+ OP_ORIS,
0x00008000,
0xffff,
0xffff8000
},
{
- OP_XORI,
+ OP_XORI,
0x8000ffff,
0xffff,
0x80000000
},
{
- OP_XORIS,
+ OP_XORIS,
0x00008000,
0xffff,
0xffff8000
@@ -93,7 +93,7 @@ int cpu_post_test_threei (void)
unsigned int reg0 = (reg + 0) % 32;
unsigned int reg1 = (reg + 1) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -16),
@@ -113,7 +113,7 @@ int cpu_post_test_threei (void)
ulong res;
ulong cr;
- cr = 0;
+ cr = 0;
cpu_post_exec_21 (code, & cr, & res, test->op1);
ret = res == test->res && cr == 0 ? 0 : -1;
@@ -126,7 +126,7 @@ int cpu_post_test_threei (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/lib_ppc/threex.c b/post/lib_ppc/threex.c
index 6aac937..1dfcc2c 100644
--- a/post/lib_ppc/threex.c
+++ b/post/lib_ppc/threex.c
@@ -53,73 +53,73 @@ static struct cpu_post_threex_s
} cpu_post_threex_table[] =
{
{
- OP_OR,
+ OP_OR,
0x1234,
0x5678,
0x1234 | 0x5678
},
{
- OP_ORC,
+ OP_ORC,
0x1234,
0x5678,
0x1234 | ~0x5678
},
{
- OP_XOR,
+ OP_XOR,
0x1234,
0x5678,
0x1234 ^ 0x5678
},
{
- OP_NAND,
+ OP_NAND,
0x1234,
0x5678,
~(0x1234 & 0x5678)
},
{
- OP_NOR,
+ OP_NOR,
0x1234,
0x5678,
~(0x1234 | 0x5678)
},
{
- OP_EQV,
+ OP_EQV,
0x1234,
0x5678,
~(0x1234 ^ 0x5678)
},
{
- OP_SLW,
+ OP_SLW,
0x80,
16,
0x800000
},
{
- OP_SLW,
+ OP_SLW,
0x80,
32,
0
},
{
- OP_SRW,
+ OP_SRW,
0x800000,
16,
0x80
},
{
- OP_SRW,
+ OP_SRW,
0x800000,
32,
0
},
{
- OP_SRAW,
+ OP_SRAW,
0x80000000,
3,
0xf0000000
},
{
- OP_SRAW,
+ OP_SRAW,
0x8000,
3,
0x1000
@@ -144,7 +144,7 @@ int cpu_post_test_threex (void)
unsigned int reg1 = (reg + 1) % 32;
unsigned int reg2 = (reg + 2) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -24),
@@ -165,7 +165,7 @@ int cpu_post_test_threex (void)
ASM_LWZ(stk, 1, -4),
ASM_BLR,
};
- unsigned long codecr[] =
+ unsigned long codecr[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -24),
@@ -191,26 +191,26 @@ int cpu_post_test_threex (void)
if (ret == 0)
{
- cr = 0;
- cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+ cr = 0;
+ cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
- ret = res == test->res && cr == 0 ? 0 : -1;
+ ret = res == test->res && cr == 0 ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at threex test %d !\n", i);
- }
+ }
}
if (ret == 0)
{
- cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+ cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
- ret = res == test->res &&
+ ret = res == test->res &&
(cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at threex test %d !\n", i);
}
}
@@ -218,7 +218,7 @@ int cpu_post_test_threex (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/lib_ppc/twox.c b/post/lib_ppc/twox.c
index 7417a36..519b432 100644
--- a/post/lib_ppc/twox.c
+++ b/post/lib_ppc/twox.c
@@ -51,32 +51,32 @@ static struct cpu_post_twox_s
} cpu_post_twox_table[] =
{
{
- OP_EXTSB,
+ OP_EXTSB,
3,
3
},
{
- OP_EXTSB,
+ OP_EXTSB,
0xff,
-1
},
{
- OP_EXTSH,
+ OP_EXTSH,
3,
3
},
{
- OP_EXTSH,
+ OP_EXTSH,
0xff,
0xff
},
{
- OP_EXTSH,
+ OP_EXTSH,
0xffff,
-1
},
{
- OP_CNTLZW,
+ OP_CNTLZW,
0x000fffff,
12
},
@@ -99,7 +99,7 @@ int cpu_post_test_twox (void)
unsigned int reg0 = (reg + 0) % 32;
unsigned int reg1 = (reg + 1) % 32;
unsigned int stk = reg < 16 ? 31 : 15;
- unsigned long code[] =
+ unsigned long code[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -16),
@@ -116,7 +116,7 @@ int cpu_post_test_twox (void)
ASM_LWZ(stk, 1, -4),
ASM_BLR,
};
- unsigned long codecr[] =
+ unsigned long codecr[] =
{
ASM_STW(stk, 1, -4),
ASM_ADDI(stk, 1, -16),
@@ -138,26 +138,26 @@ int cpu_post_test_twox (void)
if (ret == 0)
{
- cr = 0;
- cpu_post_exec_21 (code, & cr, & res, test->op);
+ cr = 0;
+ cpu_post_exec_21 (code, & cr, & res, test->op);
- ret = res == test->res && cr == 0 ? 0 : -1;
+ ret = res == test->res && cr == 0 ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at twox test %d !\n", i);
- }
+ }
}
if (ret == 0)
{
- cpu_post_exec_21 (codecr, & cr, & res, test->op);
+ cpu_post_exec_21 (codecr, & cr, & res, test->op);
- ret = res == test->res &&
+ ret = res == test->res &&
(cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
- if (ret != 0)
- {
+ if (ret != 0)
+ {
post_log ("Error at twox test %d !\n", i);
}
}
@@ -165,7 +165,7 @@ int cpu_post_test_twox (void)
}
if (flag)
- enable_interrupts();
+ enable_interrupts();
return ret;
}
diff --git a/post/rules.mk b/post/rules.mk
index 94e72be..1efc9c7 100644
--- a/post/rules.mk
+++ b/post/rules.mk
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
COBJS := $(COBJS-y)
AOBJS := $(AOBJS-y)
-SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
LIB := $(obj)$(LIB)
diff --git a/tools/Makefile b/tools/Makefile
index b897923..5285055 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -224,7 +224,7 @@ else
HOSTOS=$(HOSTOS) \
HOSTARCH=$(HOSTARCH) \
HOST_CFLAGS="$(HOST_CFLAGS)" \
- HOST_LDFLAGS="$(HOST_LDFLAGS)" \
+ HOST_LDFLAGS="$(HOST_LDFLAGS)" \
-C $$dir || exit 1 ; \
done
endif
diff --git a/tools/easylogo/easylogo.c b/tools/easylogo/easylogo.c
index c20e6a7..00a1e4e 100644
--- a/tools/easylogo/easylogo.c
+++ b/tools/easylogo/easylogo.c
@@ -332,7 +332,7 @@ int image_save_header (image_t * image, char *filename, char *varname)
if (col)
fprintf (file, "%s\n", str);
- /* End of declaration */
+ /* End of declaration */
fprintf (file, "};\n\n");
/* Variable */
fprintf (file, "fastimage_t %s = {\n", varname);
diff --git a/tools/env/fw_env.h b/tools/env/fw_env.h
index 248f58c..c04da54 100644
--- a/tools/env/fw_env.h
+++ b/tools/env/fw_env.h
@@ -42,9 +42,9 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
extern int fw_printenv(int argc, char *argv[]);
diff --git a/tools/gdb/remote.c b/tools/gdb/remote.c
index f40b6c6..c76a7ba 100644
--- a/tools/gdb/remote.c
+++ b/tools/gdb/remote.c
@@ -268,7 +268,7 @@ remote_continue(void)
remote restart RXX Restart the remote server
- extended ops ! Use the extended remote protocol.
+ extended ops ! Use the extended remote protocol.
Sticky -- only needs to be set once.
kill request k