aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README6
-rw-r--r--arch/arm/cpu/armv7/ls102xa/clock.c9
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/Kconfig1
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c10
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c10
-rw-r--r--arch/arm/dts/fsl-ls1046a.dtsi21
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/config.h3
-rw-r--r--arch/powerpc/cpu/mpc85xx/Kconfig71
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c38
-rw-r--r--arch/powerpc/cpu/mpc86xx/speed.c15
-rw-r--r--board/freescale/ls1012afrdm/ls1012afrdm.c35
-rw-r--r--board/freescale/ls1012aqds/ls1012aqds.c36
-rw-r--r--board/freescale/ls1012ardb/ls1012ardb.c35
-rw-r--r--board/freescale/ls1021aqds/ddr.c3
-rw-r--r--configs/ls1012afrdm_qspi_defconfig1
-rw-r--r--configs/ls1012aqds_qspi_defconfig1
-rw-r--r--configs/ls1012ardb_qspi_defconfig1
-rw-r--r--configs/ls1046aqds_defconfig2
-rw-r--r--configs/ls1046aqds_lpuart_defconfig2
-rw-r--r--configs/ls1046aqds_nand_defconfig2
-rw-r--r--configs/ls1046aqds_qspi_defconfig2
-rw-r--r--configs/ls1046aqds_sdcard_ifc_defconfig2
-rw-r--r--configs/ls1046aqds_sdcard_qspi_defconfig2
-rw-r--r--configs/ls1046ardb_emmc_defconfig2
-rw-r--r--configs/ls1046ardb_qspi_defconfig2
-rw-r--r--configs/ls1046ardb_sdcard_defconfig2
-rw-r--r--drivers/net/fsl-mc/mc.c103
-rw-r--r--include/configs/B4860QDS.h1
-rw-r--r--include/configs/BSC9131RDB.h1
-rw-r--r--include/configs/BSC9132QDS.h1
-rw-r--r--include/configs/C29XPCIE.h1
-rw-r--r--include/configs/MPC8536DS.h1
-rw-r--r--include/configs/MPC8569MDS.h2
-rw-r--r--include/configs/MPC8572DS.h1
-rw-r--r--include/configs/P1010RDB.h1
-rw-r--r--include/configs/P1022DS.h1
-rw-r--r--include/configs/P1023RDB.h1
-rw-r--r--include/configs/P2041RDB.h1
-rw-r--r--include/configs/T102xQDS.h1
-rw-r--r--include/configs/T102xRDB.h1
-rw-r--r--include/configs/T1040QDS.h1
-rw-r--r--include/configs/T104xRDB.h1
-rw-r--r--include/configs/T208xQDS.h1
-rw-r--r--include/configs/T208xRDB.h1
-rw-r--r--include/configs/T4240RDB.h1
-rw-r--r--include/configs/UCP1020.h1
-rw-r--r--include/configs/controlcenterd.h1
-rw-r--r--include/configs/corenet_ds.h1
-rw-r--r--include/configs/cyrus.h1
-rw-r--r--include/configs/km/kmp204x-common.h1
-rw-r--r--include/configs/ls1012a_common.h1
-rw-r--r--include/configs/ls1046aqds.h12
-rw-r--r--include/configs/p1_p2_rdb_pc.h1
-rw-r--r--include/configs/p1_twr.h1
-rw-r--r--include/configs/t4qds.h1
-rw-r--r--include/configs/xpedite537x.h1
-rw-r--r--include/configs/xpedite550x.h1
57 files changed, 356 insertions, 103 deletions
diff --git a/README b/README
index 9c992c1..ecb1710 100644
--- a/README
+++ b/README
@@ -504,6 +504,12 @@ The following options need to be configured:
CONFIG_SYS_FSL_IFC_LE
Defines the IFC controller register space as Little Endian
+ CONFIG_SYS_FSL_IFC_CLK_DIV
+ Defines divider of platform clock(clock input to IFC controller).
+
+ CONFIG_SYS_FSL_LBC_CLK_DIV
+ Defines divider of platform clock(clock input to eLBC controller).
+
CONFIG_SYS_FSL_PBL_PBI
It enables addition of RCW (Power on reset configuration) in built image.
Please refer doc/README.pblimage for more details
diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c
index 7a337e1..b7d61ad 100644
--- a/arch/arm/cpu/armv7/ls102xa/clock.c
+++ b/arch/arm/cpu/armv7/ls102xa/clock.c
@@ -19,10 +19,6 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info(struct sys_info *sys_info)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-#ifdef CONFIG_FSL_IFC
- struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
- u32 ccr;
-#endif
struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR);
unsigned int cpu;
const u8 core_cplx_pll[6] = {
@@ -74,10 +70,7 @@ void get_sys_info(struct sys_info *sys_info)
}
#if defined(CONFIG_FSL_IFC)
- ccr = in_be32(&ifc_regs.gregs->ifc_ccr);
- ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
-
- sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+ sys_info->freq_localbus = sys_info->freq_systembus;
#endif
}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 47897f4..adccdf1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -34,6 +34,7 @@ config ARCH_LS1046A
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
+ select SYS_FSL_ERRATUM_A008336
select SYS_FSL_ERRATUM_A008511
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
index 3da7037..2d7775e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -22,10 +22,6 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info(struct sys_info *sys_info)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-#ifdef CONFIG_FSL_IFC
- struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
- u32 ccr;
-#endif
#if (defined(CONFIG_FSL_ESDHC) &&\
defined(CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK)) ||\
defined(CONFIG_SYS_DPAA_FMAN)
@@ -156,10 +152,8 @@ void get_sys_info(struct sys_info *sys_info)
#endif
#if defined(CONFIG_FSL_IFC)
- ccr = ifc_in32(&ifc_regs.gregs->ifc_ccr);
- ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
-
- sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+ sys_info->freq_localbus = sys_info->freq_systembus /
+ CONFIG_SYS_FSL_IFC_CLK_DIV;
#endif
}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index f8fefc7..ab46431 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -26,10 +26,6 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info(struct sys_info *sys_info)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-#ifdef CONFIG_FSL_IFC
- struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
- u32 ccr;
-#endif
struct ccsr_clk_cluster_group __iomem *clk_grp[2] = {
(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR),
(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR)
@@ -128,10 +124,8 @@ void get_sys_info(struct sys_info *sys_info)
}
#if defined(CONFIG_FSL_IFC)
- ccr = ifc_in32(&ifc_regs.gregs->ifc_ccr);
- ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
-
- sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+ sys_info->freq_localbus = sys_info->freq_systembus /
+ CONFIG_SYS_FSL_IFC_CLK_DIV;
#endif
}
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
index aaf0ae9..408e81e 100644
--- a/arch/arm/dts/fsl-ls1046a.dtsi
+++ b/arch/arm/dts/fsl-ls1046a.dtsi
@@ -217,6 +217,27 @@
status = "disabled";
};
+ usb0: usb@2f00000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 4>;
+ dr_mode = "host";
+ };
+
+ usb1: usb@3000000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <0 61 4>;
+ dr_mode = "host";
+ };
+
+ usb2: usb@3100000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 63 4>;
+ dr_mode = "host";
+ };
+
pcie@3400000 {
compatible = "fsl,ls-pcie", "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 8c426af..83f5501 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -192,6 +192,9 @@
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
+#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
+
#elif defined(CONFIG_ARCH_LS1046A)
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 38ea4c1..592b581 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -374,6 +374,7 @@ config ARCH_B4420
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
+ select FSL_IFC
config ARCH_B4860
bool
@@ -398,6 +399,7 @@ config ARCH_B4860
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
+ select FSL_IFC
config ARCH_BSC9131
bool
@@ -410,6 +412,7 @@ config ARCH_BSC9131
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select FSL_IFC
config ARCH_BSC9132
bool
@@ -426,6 +429,7 @@ config ARCH_BSC9132
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_IFC
config ARCH_C29X
bool
@@ -438,6 +442,7 @@ config ARCH_C29X
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_6
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_IFC
config ARCH_MPC8536
bool
@@ -450,6 +455,7 @@ config ARCH_MPC8536
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_MPC8540
bool
@@ -473,6 +479,7 @@ config ARCH_MPC8544
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_MPC8548
bool
@@ -519,6 +526,7 @@ config ARCH_MPC8569
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
+ select FSL_ELBC
config ARCH_MPC8572
bool
@@ -533,6 +541,7 @@ config ARCH_MPC8572
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_P1010
bool
@@ -553,6 +562,7 @@ config ARCH_P1010
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_IFC
config ARCH_P1011
bool
@@ -566,6 +576,7 @@ config ARCH_P1011
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_P1020
bool
@@ -579,6 +590,7 @@ config ARCH_P1020
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_P1021
bool
@@ -592,6 +604,7 @@ config ARCH_P1021
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_P1022
bool
@@ -607,6 +620,7 @@ config ARCH_P1022
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_P1023
bool
@@ -618,6 +632,7 @@ config ARCH_P1023
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select FSL_ELBC
config ARCH_P1024
bool
@@ -631,6 +646,7 @@ config ARCH_P1024
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_P1025
bool
@@ -644,6 +660,7 @@ config ARCH_P1025
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_P2020
bool
@@ -658,6 +675,7 @@ config ARCH_P2020
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
+ select FSL_ELBC
config ARCH_P2041
bool
@@ -679,6 +697,7 @@ config ARCH_P2041
select SYS_FSL_QORIQ_CHASSIS1
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select FSL_ELBC
config ARCH_P3041
bool
@@ -702,6 +721,7 @@ config ARCH_P3041
select SYS_FSL_QORIQ_CHASSIS1
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select FSL_ELBC
config ARCH_P4080
bool
@@ -736,6 +756,7 @@ config ARCH_P4080
select SYS_FSL_QORIQ_CHASSIS1
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
+ select FSL_ELBC
config ARCH_P5020
bool
@@ -756,6 +777,7 @@ config ARCH_P5020
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
+ select FSL_ELBC
config ARCH_P5040
bool
@@ -776,6 +798,7 @@ config ARCH_P5040
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
+ select FSL_ELBC
config ARCH_QEMU_E500
bool
@@ -795,6 +818,7 @@ config ARCH_T1023
select SYS_FSL_QORIQ_CHASSIS2
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
+ select FSL_IFC
config ARCH_T1024
bool
@@ -811,6 +835,7 @@ config ARCH_T1024
select SYS_FSL_QORIQ_CHASSIS2
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
+ select FSL_IFC
config ARCH_T1040
bool
@@ -828,6 +853,7 @@ config ARCH_T1040
select SYS_FSL_QORIQ_CHASSIS2
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
+ select FSL_IFC
config ARCH_T1042
bool
@@ -845,6 +871,7 @@ config ARCH_T1042
select SYS_FSL_QORIQ_CHASSIS2
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
+ select FSL_IFC
config ARCH_T2080
bool
@@ -866,6 +893,7 @@ config ARCH_T2080
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
+ select FSL_IFC
config ARCH_T2081
bool
@@ -885,6 +913,7 @@ config ARCH_T2081
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
+ select FSL_IFC
config ARCH_T4160
bool
@@ -905,6 +934,7 @@ config ARCH_T4160
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
+ select FSL_IFC
config ARCH_T4240
bool
@@ -928,6 +958,7 @@ config ARCH_T4240
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
+ select FSL_IFC
config BOOKE
bool
@@ -1260,6 +1291,12 @@ config SYS_PPC64
config SYS_PPC_E500_USE_DEBUG_TLB
bool
+config FSL_IFC
+ bool
+
+config FSL_ELBC
+ bool
+
config SYS_PPC_E500_DEBUG_TLB
int "Temporary TLB entry for external debugger"
depends on SYS_PPC_E500_USE_DEBUG_TLB
@@ -1284,6 +1321,40 @@ config SYS_PPC_E500_DEBUG_TLB
symbol should be set to the TLB1 entry to be used for this
purpose. If unsure, do not change.
+config SYS_FSL_IFC_CLK_DIV
+ int "Divider of platform clock"
+ depends on FSL_IFC
+ default 2 if ARCH_B4420 || \
+ ARCH_B4860 || \
+ ARCH_T1024 || \
+ ARCH_T1023 || \
+ ARCH_T1040 || \
+ ARCH_T1042 || \
+ ARCH_T4160 || \
+ ARCH_T4240
+ default 1
+ help
+ Defines divider of platform clock(clock input to
+ IFC controller).
+
+config SYS_FSL_LBC_CLK_DIV
+ int "Divider of platform clock"
+ depends on FSL_ELBC || ARCH_MPC8540 || \
+ ARCH_MPC8548 || ARCH_MPC8541 || \
+ ARCH_MPC8555 || ARCH_MPC8560 || \
+ ARCH_MPC8568
+
+ default 2 if ARCH_P2041 || \
+ ARCH_P3041 || \
+ ARCH_P4080 || \
+ ARCH_P5020 || \
+ ARCH_P5040
+ default 1
+
+ help
+ Defines divider of platform clock(clock input to
+ eLBC controller).
+
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index fcf5d92..cb8281e 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -27,10 +27,6 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info(sys_info_t *sys_info)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_FSL_IFC
- struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
- u32 ccr;
-#endif
#ifdef CONFIG_FSL_CORENET
volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
unsigned int cpu;
@@ -611,39 +607,13 @@ void get_sys_info(sys_info_t *sys_info)
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
- uint lcrr_div;
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV;
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
-#if defined(CONFIG_FSL_CORENET)
- /* If this is corenet based SoC, bit-representation
- * for four times the clock divider values.
- */
- lcrr_div *= 4;
-#elif !defined(CONFIG_ARCH_MPC8540) && !defined(CONFIG_ARCH_MPC8541) && \
- !defined(CONFIG_ARCH_MPC8555) && !defined(CONFIG_ARCH_MPC8560)
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider values.
- */
- lcrr_div *= 2;
-#endif
- sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div;
- } else {
- /* In case anyone cares what the unknown value is */
- sys_info->freq_localbus = lcrr_div;
- }
+ sys_info->freq_localbus = sys_info->freq_systembus /
+ CONFIG_SYS_FSL_LBC_CLK_DIV;
#endif
#if defined(CONFIG_FSL_IFC)
- ccr = ifc_in32(&ifc_regs.gregs->ifc_ccr);
- ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
-
- sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+ sys_info->freq_localbus = sys_info->freq_systembus /
+ CONFIG_SYS_FSL_IFC_CLK_DIV;
#endif
}
diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c
index 05f23db..51b47b8 100644
--- a/arch/powerpc/cpu/mpc86xx/speed.c
+++ b/arch/powerpc/cpu/mpc86xx/speed.c
@@ -24,7 +24,6 @@ void get_sys_info(sys_info_t *sys_info)
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint plat_ratio, e600_ratio;
- uint lcrr_div;
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
@@ -78,19 +77,7 @@ void get_sys_info(sys_info_t *sys_info)
break;
}
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
- sys_info->freq_localbus = sys_info->freq_systembus
- / (lcrr_div * 2);
- } else {
- /* In case anyone cares what the unknown value is */
- sys_info->freq_localbus = lcrr_div;
- }
+ sys_info->freq_localbus = sys_info->freq_systembus;
}
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index b03bdb8..789cae2 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -9,6 +9,9 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
+#ifdef CONFIG_FSL_LS_PPA
+#include <asm/arch/ppa.h>
+#endif
#include <asm/arch/soc.h>
#include <hwconfig.h>
#include <environment.h>
@@ -74,6 +77,9 @@ int board_init(void)
gd->env_addr = (ulong)&default_environment[0];
#endif
+#ifdef CONFIG_FSL_LS_PPA
+ ppa_init();
+#endif
return 0;
}
@@ -85,3 +91,32 @@ int ft_board_setup(void *blob, bd_t *bd)
return 0;
}
+
+void dram_init_banksize(void)
+{
+ /*
+ * gd->arch.secure_ram tracks the location of secure memory.
+ * It was set as if the memory starts from 0.
+ * The address needs to add the offset of its bank.
+ */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+ gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+ gd->bd->bi_dram[1].size = gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ } else {
+ gd->bd->bi_dram[0].size = gd->ram_size;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ }
+}
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 88fb4ce..4281790 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -10,6 +10,9 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
+#ifdef CONFIG_FSL_LS_PPA
+#include <asm/arch/ppa.h>
+#endif
#include <asm/arch/fdt.h>
#include <asm/arch/soc.h>
#include <ahci.h>
@@ -113,6 +116,10 @@ int board_init(void)
#ifdef CONFIG_ENV_IS_NOWHERE
gd->env_addr = (ulong)&default_environment[0];
#endif
+
+#ifdef CONFIG_FSL_LS_PPA
+ ppa_init();
+#endif
return 0;
}
@@ -159,3 +166,32 @@ int ft_board_setup(void *blob, bd_t *bd)
return 0;
}
#endif
+
+void dram_init_banksize(void)
+{
+ /*
+ * gd->arch.secure_ram tracks the location of secure memory.
+ * It was set as if the memory starts from 0.
+ * The address needs to add the offset of its bank.
+ */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+ gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+ gd->bd->bi_dram[1].size = gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ } else {
+ gd->bd->bi_dram[0].size = gd->ram_size;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ }
+}
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index 65fa94c..e3a8a76 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -9,6 +9,9 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
+#ifdef CONFIG_FSL_LS_PPA
+#include <asm/arch/ppa.h>
+#endif
#include <asm/arch/soc.h>
#include <hwconfig.h>
#include <ahci.h>
@@ -110,6 +113,9 @@ int board_init(void)
gd->env_addr = (ulong)&default_environment[0];
#endif
+#ifdef CONFIG_FSL_LS_PPA
+ ppa_init();
+#endif
return 0;
}
@@ -159,3 +165,32 @@ int ft_board_setup(void *blob, bd_t *bd)
return 0;
}
+
+void dram_init_banksize(void)
+{
+ /*
+ * gd->secure_ram tracks the location of secure memory.
+ * It was set as if the memory starts from 0.
+ * The address needs to add the offset of its bank.
+ */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+ gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+ gd->bd->bi_dram[1].size = gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ } else {
+ gd->bd->bi_dram[0].size = gd->ram_size;
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+#endif
+ }
+}
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
index 6435bf9..2f66ba9 100644
--- a/board/freescale/ls1021aqds/ddr.c
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -96,6 +96,9 @@ found:
#else
popts->cswl_override = DDR_CSWL_CS0;
+ /* optimize cpo for erratum A-009942 */
+ popts->cpo_sample = 0x58;
+
/* DHC_EN =1, ODT = 75 Ohm */
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
index 73351a6..ad9a562 100644
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -5,6 +5,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frdm"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
+CONFIG_FSL_LS_PPA=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig
index 4e9fa5b..0a696ed 100644
--- a/configs/ls1012aqds_qspi_defconfig
+++ b/configs/ls1012aqds_qspi_defconfig
@@ -5,6 +5,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
+CONFIG_FSL_LS_PPA=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig
index 1b75e75..048933e 100644
--- a/configs/ls1012ardb_qspi_defconfig
+++ b/configs/ls1012ardb_qspi_defconfig
@@ -5,6 +5,7 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
+CONFIG_FSL_LS_PPA=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
index 871c35d..9986afa 100644
--- a/configs/ls1046aqds_defconfig
+++ b/configs/ls1046aqds_defconfig
@@ -32,3 +32,5 @@ CONFIG_PCIE_LAYERSCAPE=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index 83a8b5f..490175a 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -28,3 +28,5 @@ CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index 2864916..57937b9 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -37,3 +37,5 @@ CONFIG_PCIE_LAYERSCAPE=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index 4d8302e..45782be 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -35,3 +35,5 @@ CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index 53ee3c5..caf47fe 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -38,3 +38,5 @@ CONFIG_PCIE_LAYERSCAPE=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index 3cf6824..998d2cf 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -40,3 +40,5 @@ CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index fcd1509..4a34209 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -35,3 +35,5 @@ CONFIG_PCIE_LAYERSCAPE=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index 1fb5cac..e2eaa9e 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -31,3 +31,5 @@ CONFIG_PCIE_LAYERSCAPE=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index ea1fa79..a8df6cc 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -35,3 +35,5 @@ CONFIG_PCIE_LAYERSCAPE=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index 46b8a6b..079082a 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -8,6 +8,7 @@
#include <linux/bug.h>
#include <asm/io.h>
#include <libfdt.h>
+#include <net.h>
#include <fdt_support.h>
#include <fsl-mc/fsl_mc.h>
#include <fsl-mc/fsl_mc_sys.h>
@@ -195,10 +196,81 @@ static int calculate_mc_private_ram_params(u64 mc_private_ram_start_addr,
return 0;
}
+static int mc_fixup_dpc_mac_addr(void *blob, int noff, int dpmac_id,
+ struct eth_device *eth_dev)
+{
+ int nodeoffset, err = 0;
+ char mac_name[10];
+ const char link_type_mode[] = "FIXED_LINK";
+ unsigned char env_enetaddr[6];
+
+ sprintf(mac_name, "mac@%d", dpmac_id);
+
+ /* node not found - create it */
+ nodeoffset = fdt_subnode_offset(blob, noff, (const char *) mac_name);
+ if (nodeoffset < 0) {
+ err = fdt_increase_size(blob, 200);
+ if (err) {
+ printf("fdt_increase_size: err=%s\n",
+ fdt_strerror(err));
+ return err;
+ }
+
+ nodeoffset = fdt_add_subnode(blob, noff, mac_name);
+
+ /* add default property of fixed link */
+ err = fdt_appendprop_string(blob, nodeoffset,
+ "link_type", link_type_mode);
+ if (err) {
+ printf("fdt_appendprop_string: err=%s\n",
+ fdt_strerror(err));
+ return err;
+ }
+ }
+
+ /* port_mac_address property present in DPC */
+ if (fdt_get_property(blob, nodeoffset, "port_mac_address", NULL)) {
+ /* MAC addr randomly assigned - leave the one in DPC */
+ eth_getenv_enetaddr_by_index("eth", eth_dev->index,
+ env_enetaddr);
+ if (is_zero_ethaddr(env_enetaddr))
+ return err;
+
+ /* replace DPC MAC address with u-boot env one */
+ err = fdt_setprop(blob, nodeoffset, "port_mac_address",
+ eth_dev->enetaddr, 6);
+ if (err) {
+ printf("fdt_setprop mac: err=%s\n", fdt_strerror(err));
+ return err;
+ }
+
+ return 0;
+ }
+
+ /* append port_mac_address property to mac node in DPC */
+ err = fdt_increase_size(blob, 80);
+ if (err) {
+ printf("fdt_increase_size: err=%s\n", fdt_strerror(err));
+ return err;
+ }
+
+ err = fdt_appendprop(blob, nodeoffset,
+ "port_mac_address", eth_dev->enetaddr, 6);
+ if (err) {
+ printf("fdt_appendprop: err=%s\n", fdt_strerror(err));
+ return err;
+ }
+
+ return err;
+}
+
static int mc_fixup_dpc(u64 dpc_addr)
{
void *blob = (void *)dpc_addr;
- int nodeoffset;
+ int nodeoffset, err = 0;
+ char ethname[10];
+ struct eth_device *eth_dev;
+ int i;
/* delete any existing ICID pools */
nodeoffset = fdt_path_offset(blob, "/resources/icid_pools");
@@ -220,9 +292,36 @@ static int mc_fixup_dpc(u64 dpc_addr)
FSL_DPAA2_STREAM_ID_END -
FSL_DPAA2_STREAM_ID_START + 1, 1);
+ /* fixup MAC addresses for dpmac ports */
+ nodeoffset = fdt_path_offset(blob, "/board_info/ports");
+ if (nodeoffset < 0)
+ goto out;
+
+ for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
+ /* port not enabled */
+ if ((wriop_is_enabled_dpmac(i) != 1) ||
+ (wriop_get_phy_address(i) == -1))
+ continue;
+
+ sprintf(ethname, "DPMAC%d@%s", i,
+ phy_interface_strings[wriop_get_enet_if(i)]);
+
+ eth_dev = eth_get_dev_by_name(ethname);
+ if (eth_dev == NULL)
+ continue;
+
+ err = mc_fixup_dpc_mac_addr(blob, nodeoffset, i, eth_dev);
+ if (err) {
+ printf("mc_fixup_dpc_mac_addr failed: err=%s\n",
+ fdt_strerror(err));
+ goto out;
+ }
+ }
+
+out:
flush_dcache_range(dpc_addr, dpc_addr + fdt_totalsize(blob));
- return 0;
+ return err;
}
static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpc_addr)
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index fc99b96..2fdb869 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -63,7 +63,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_PCIE1 /* PCIE controller 1 */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 77f0927..4116234 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -46,7 +46,6 @@
#endif
/* High Level Configuration Options */
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_TSEC_ENET
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 9e729fd..942123b 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -68,7 +68,6 @@
#endif
/* High Level Configuration Options */
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index e1ce7ad..8f68748 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -68,7 +68,6 @@
#endif
/* High Level Configuration Options */
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 4635cdf..b9eab4e 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -37,7 +37,6 @@
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
-#define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */
#define CONFIG_PCI1 1 /* Enable PCI controller 1 */
#define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index caa52be..91e17d9 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -10,8 +10,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */
-
#define CONFIG_SYS_SRIO
#define CONFIG_SRIO1 /* SRIO port 1 */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index b933d21..3d4c8a8 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -28,7 +28,6 @@
/* High Level Configuration Options */
#define CONFIG_MP 1 /* support multiple processors */
-#define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */
#define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */
#define CONFIG_PCIE3 1 /* PCIE controller 3 (ULI bridge) */
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index baa8369..cf574da 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -130,7 +130,6 @@
#endif
/* High Level Configuration Options */
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index f1d8116..e601cc6 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -96,7 +96,6 @@
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
-#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
#define CONFIG_PCIE3 /* PCIE controller 3 (ULI bridge) */
diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index 1369035..58a3507 100644
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -25,7 +25,6 @@
/* High Level Configuration Options */
#define CONFIG_MP /* support multiple processors */
-#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 15384f1..3fad88f 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -41,7 +41,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_PCIE1 /* PCIE controller 1 */
#define CONFIG_PCIE2 /* PCIE controller 2 */
diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 00ffb83..fcaa803 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -23,7 +23,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 02c3fdd..e46bf00 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -23,7 +23,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index bd8e46e..2d436c2 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -51,7 +51,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCIE1 /* PCIE controller 1 */
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 82d3f10..9306b73 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -162,7 +162,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCIE1 /* PCIE controller 1 */
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index a9835b9..0a65d0e 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -33,7 +33,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 1e2b94e..f833732 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -27,7 +27,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 2a1b547..dbb9fd4 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -73,7 +73,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_PCIE1 /* PCIE controller 1 */
#define CONFIG_PCIE2 /* PCIE controller 2 */
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
index 28f4b14..8082ec5 100644
--- a/include/configs/UCP1020.h
+++ b/include/configs/UCP1020.h
@@ -14,7 +14,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_FSL_ELBC
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index e5d60fb..cc2b273 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -137,7 +137,6 @@
/*
* Local Bus Definitions
*/
-#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
#define CONFIG_SYS_ELBC_BASE 0xe0000000
#ifdef CONFIG_PHYS_64BIT
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 7637bb8..dd38fa3 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -59,7 +59,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
#define CONFIG_PCIE1 /* PCIE controller 1 */
#define CONFIG_PCIE2 /* PCIE controller 2 */
diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h
index c9a57af..3f195ab 100644
--- a/include/configs/cyrus.h
+++ b/include/configs/cyrus.h
@@ -49,7 +49,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
#define CONFIG_PCIE1 /* PCIE controller 1 */
#define CONFIG_PCIE2 /* PCIE controller 2 */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 8669fcd..efd3b28 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -35,7 +35,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
#define CONFIG_PCIE1 /* PCIE controller 1 */
#define CONFIG_PCIE3 /* PCIE controller 3 */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 81f8d62..0965afa 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -29,6 +29,7 @@
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ/4 /* 25MHz */
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index efc0fd9..0e648b1 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -135,6 +135,18 @@ unsigned long get_board_ddr_clk(void);
#define CFG_LPUART_EN 0x2
#endif
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_HCD
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#endif
+
/* SATA */
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 9b142bc..88876d6 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -260,7 +260,6 @@
#define CONFIG_MP
-#define CONFIG_FSL_ELBC
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index a98e1b2..d403f84 100644
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -40,7 +40,6 @@
#define CONFIG_MP
-#define CONFIG_FSL_ELBC
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 15c0e89..7803a84 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -26,7 +26,6 @@
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_PCIE1 /* PCIE controller 1 */
#define CONFIG_PCIE2 /* PCIE controller 2 */
#define CONFIG_PCIE3 /* PCIE controller 3 */
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 5d78560..2f133d2 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -29,7 +29,6 @@
#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
-#define CONFIG_FSL_ELBC 1
/*
* Multicore config
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 6346f84..4ac25a6 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -30,7 +30,6 @@
#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
-#define CONFIG_FSL_ELBC 1
/*
* Multicore config