diff options
144 files changed, 6257 insertions, 5611 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 8603085..e792a8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -607,6 +607,7 @@ Enric Balletbo i Serra <eballetbo@iseebcn.com> igep0020 ARM ARMV7 (OMAP3xx SoC) igep0030 ARM ARMV7 (OMAP3xx SoC) + igep0032 ARM ARMV7 (OMAP3xx SoC) Eric Benard <eric@eukrea.com> @@ -1532,6 +1532,17 @@ CBFS (Coreboot Filesystem) support allows for a "silent" boot where a splash screen is loaded very quickly after power-on. + CONFIG_SPLASHIMAGE_GUARD + + If this option is set, then U-Boot will prevent the environment + variable "splashimage" from being set to a problematic address + (see README.displaying-bmps and README.arm-unaligned-accesses). + This option is useful for targets where, due to alignment + restrictions, an improperly aligned BMP image will cause a data + abort. If you think you will not have problems with unaligned + accesses (for example because your toolchain prevents them) + there is no need to set this option. + CONFIG_SPLASH_SCREEN_ALIGN If this option is set the splash image can be freely positioned @@ -1552,6 +1563,14 @@ CBFS (Coreboot Filesystem) support => vertically centered image at x = dspWidth - bmpWidth - 9 + CONFIG_SPLASH_SCREEN_PREPARE + + If this option is set then the board_splash_screen_prepare() + function, which must be defined in your code, is called as part + of the splash screen display sequence. It gives the board an + opportunity to prepare the splash image data before it is + processed and sent to the frame buffer by U-Boot. + - Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP If this option is set, additionally to standard BMP diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index d11e6f6..46f4b64 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -519,7 +519,7 @@ u32 spl_boot_device(void) case RCSR_MEM_TYPE_NOR: return BOOT_DEVICE_NOR; case RCSR_MEM_TYPE_ONENAND: - return BOOT_DEVICE_ONE_NAND; + return BOOT_DEVICE_ONENAND; default: return BOOT_DEVICE_NONE; } diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index ab31326..e35a3e3 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -56,11 +56,11 @@ int cpu_mmc_init(bd_t *bis) { int ret; - ret = omap_mmc_init(0, 0, 0); + ret = omap_mmc_init(0, 0, 0, -1, -1); if (ret) return ret; - return omap_mmc_init(1, 0, 0); + return omap_mmc_init(1, 0, 0, -1, -1); } #endif diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c index fd9fc4a..448cc40 100644 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -45,13 +45,19 @@ static struct ddr_cmdtctrl *ioctrl_reg = { */ void config_sdram(const struct emif_regs *regs) { - writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); - writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); - if (regs->zq_config){ + if (regs->zq_config) { + /* + * A value of 0x2800 for the REF CTRL will give us + * about 570us for a delay, which will be long enough + * to configure things. + */ + writel(0x2800, &emif_reg->emif_sdram_ref_ctrl); writel(regs->zq_config, &emif_reg->emif_zq_config); writel(regs->sdram_config, &cstat->secure_emif_sdram_config); } writel(regs->sdram_config, &emif_reg->emif_sdram_config); + writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); + writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); } /** diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 2b584e0..24cbe2d 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -55,17 +55,20 @@ void spl_board_init(void) #ifdef CONFIG_SPL_NAND_SUPPORT gpmc_init(); #endif +#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) + arch_misc_init(); +#endif } int board_mmc_init(bd_t *bis) { switch (spl_boot_device()) { case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); break; case BOOT_DEVICE_MMC2: case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0); + omap_mmc_init(1, 0, 0, -1, -1); break; } return 0; diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index b1fd277..9ed1899 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -36,6 +36,7 @@ #include <asm/arch/sys_proto.h> #include <asm/utils.h> #include <asm/omap_gpio.h> +#include <asm/emif.h> #ifndef CONFIG_SPL_BUILD /* @@ -46,9 +47,20 @@ #define puts(s) #endif +const u32 sys_clk_array[8] = { + 12000000, /* 12 MHz */ + 13000000, /* 13 MHz */ + 16800000, /* 16.8 MHz */ + 19200000, /* 19.2 MHz */ + 26000000, /* 26 MHz */ + 27000000, /* 27 MHz */ + 38400000, /* 38.4 MHz */ + 20000000, /* 20 MHz */ +}; + static inline u32 __get_sys_clk_index(void) { - u32 ind; + s8 ind; /* * For ES1 the ROM code calibration of sys clock is not reliable * due to hw issue. So, use hard-coded value. If this value is not @@ -60,8 +72,15 @@ static inline u32 __get_sys_clk_index(void) ind = OMAP_SYS_CLK_IND_38_4_MHZ; else { /* SYS_CLKSEL - 1 to match the dpll param array indices */ - ind = (readl(&prcm->cm_sys_clksel) & + ind = (readl((*prcm)->cm_sys_clksel) & CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; + /* + * SYS_CLKSEL value for 20MHz is 0. This is introduced newly + * in DRA7XX socs. SYS_CLKSEL -1 will be greater than + * NUM_SYS_CLK. So considering the last 3 bits as the index + * for the dpll param array. + */ + ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK; } return ind; } @@ -75,7 +94,34 @@ u32 get_sys_clk_freq(void) return sys_clk_array[index]; } -static inline void do_bypass_dpll(u32 *const base) +void setup_post_dividers(u32 const base, const struct dpll_params *params) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, &dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, &dpll_regs->cm_div_m3_dpll); + if (params->m4_h11 >= 0) + writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll); + if (params->m5_h12 >= 0) + writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll); + if (params->m6_h13 >= 0) + writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll); + if (params->m7_h14 >= 0) + writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll); + if (params->h21 >= 0) + writel(params->h21, &dpll_regs->cm_div_h21_dpll); + if (params->h22 >= 0) + writel(params->h22, &dpll_regs->cm_div_h22_dpll); + if (params->h23 >= 0) + writel(params->h23, &dpll_regs->cm_div_h23_dpll); + if (params->h24 >= 0) + writel(params->h24, &dpll_regs->cm_div_h24_dpll); +} + +static inline void do_bypass_dpll(u32 const base) { struct dpll_regs *dpll_regs = (struct dpll_regs *)base; @@ -85,17 +131,17 @@ static inline void do_bypass_dpll(u32 *const base) CM_CLKMODE_DPLL_EN_SHIFT); } -static inline void wait_for_bypass(u32 *const base) +static inline void wait_for_bypass(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("Bypassing DPLL failed %p\n", base); + printf("Bypassing DPLL failed %x\n", base); } } -static inline void do_lock_dpll(u32 *const base) +static inline void do_lock_dpll(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; @@ -104,18 +150,18 @@ static inline void do_lock_dpll(u32 *const base) DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); } -static inline void wait_for_lock(u32 *const base) +static inline void wait_for_lock(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("DPLL locking failed for %p\n", base); + printf("DPLL locking failed for %x\n", base); hang(); } } -inline u32 check_for_lock(u32 *const base) +inline u32 check_for_lock(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK; @@ -123,12 +169,65 @@ inline u32 check_for_lock(u32 *const base) return lock; } -static void do_setup_dpll(u32 *const base, const struct dpll_params *params, +const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->mpu[sysclk_ind]; +} + +const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->core[sysclk_ind]; +} + +const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->per[sysclk_ind]; +} + +const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->iva[sysclk_ind]; +} + +const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->usb[sysclk_ind]; +} + +const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data) +{ +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->abe[sysclk_ind]; +#else + return dpll_data->abe; +#endif +} + +static const struct dpll_params *get_ddr_dpll_params + (struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + + if (!dpll_data->ddr) + return NULL; + return &dpll_data->ddr[sysclk_ind]; +} + +static void do_setup_dpll(u32 const base, const struct dpll_params *params, u8 lock, char *dpll) { u32 temp, M, N; struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + if (!params) + return; + temp = readl(&dpll_regs->cm_clksel_dpll); if (check_for_lock(base)) { @@ -183,7 +282,7 @@ u32 omap_ddr_clk(void) omap_rev = omap_revision(); sys_clk_khz = get_sys_clk_freq() / 1000; - core_dpll_params = get_core_dpll_params(); + core_dpll_params = get_core_dpll_params(*dplls_data); debug("sys_clk %d\n ", sys_clk_khz * 1000); @@ -235,24 +334,19 @@ void configure_mpu_dpll(void) */ if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) { mpu_dpll_regs = - (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu; - bypass_dpll(&prcm->cm_clkmode_dpll_mpu); - clrbits_le32(&prcm->cm_mpu_mpu_clkctrl, + (struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu); + bypass_dpll((*prcm)->cm_clkmode_dpll_mpu); + clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, + setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll, CM_CLKSEL_DCC_EN_MASK); } - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); + params = get_mpu_dpll_params(*dplls_data); - params = get_mpu_dpll_params(); - - do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); debug("MPU DPLL locked\n"); } @@ -271,17 +365,17 @@ static void setup_usb_dpll(void) * Use CLKINP in KHz and adjust the denominator accordingly so * that we have enough accuracy and at the same time no overflow */ - params = get_usb_dpll_params(); + params = get_usb_dpll_params(*dplls_data); num = params->m * sys_clk_khz; den = (params->n + 1) * 250 * 1000; num += den - 1; sd_div = num / den; - clrsetbits_le32(&prcm->cm_clksel_dpll_usb, + clrsetbits_le32((*prcm)->cm_clksel_dpll_usb, CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT); /* Now setup the dpll with the regular function */ - do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); } #endif @@ -293,28 +387,28 @@ static void setup_dplls(void) debug("setup_dplls\n"); /* CORE dpll */ - params = get_core_dpll_params(); /* default - safest */ + params = get_core_dpll_params(*dplls_data); /* default - safest */ /* * Do not lock the core DPLL now. Just set it up. * Core DPLL will be locked after setting up EMIF * using the FREQ_UPDATE method(freq_update_core()) */ - if (omap_revision() != OMAP5432_ES1_0) - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_NO_LOCK, "core"); else - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_LOCK, "core"); /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */ temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) | (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) | (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT); - writel(temp, &prcm->cm_clksel_core); + writel(temp, (*prcm)->cm_clksel_core); debug("Core DPLL configured\n"); /* lock PER dpll */ - params = get_per_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_per, + params = get_per_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_per, params, DPLL_LOCK, "per"); debug("PER DPLL locked\n"); @@ -324,6 +418,9 @@ static void setup_dplls(void) #ifdef CONFIG_USB_EHCI_OMAP setup_usb_dpll(); #endif + params = get_ddr_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_ddrphy, + params, DPLL_LOCK, "ddr"); } #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL @@ -333,14 +430,14 @@ static void setup_non_essential_dplls(void) const struct dpll_params *params; /* IVA */ - clrsetbits_le32(&prcm->cm_bypclk_dpll_iva, + clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva, CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); - params = get_iva_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); + params = get_iva_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); /* Configure ABE dpll */ - params = get_abe_dpll_params(); + params = get_abe_dpll_params(*dplls_data); #ifdef CONFIG_SYS_OMAP_ABE_SYSCK abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; #else @@ -349,64 +446,65 @@ static void setup_non_essential_dplls(void) * We need to enable some additional options to achieve * 196.608MHz from 32768 Hz */ - setbits_le32(&prcm->cm_clkmode_dpll_abe, + setbits_le32((*prcm)->cm_clkmode_dpll_abe, CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK| CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK| CM_CLKMODE_DPLL_LPMODE_EN_MASK| CM_CLKMODE_DPLL_REGM4XEN_MASK); /* Spend 4 REFCLK cycles at each stage */ - clrsetbits_le32(&prcm->cm_clkmode_dpll_abe, + clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe, CM_CLKMODE_DPLL_RAMP_RATE_MASK, 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT); #endif /* Select the right reference clk */ - clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel, + clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel, CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK, abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT); /* Lock the dpll */ - do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); } #endif -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv) +u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic) { - u32 step; - int ret = 0; - - /* See if we can first get the GPIO if needed */ - if (gpio >= 0) - ret = gpio_request(gpio, "TPS62361_VSEL0_GPIO"); - if (ret < 0) { - printf("%s: gpio %d request failed %d\n", __func__, gpio, ret); - gpio = -1; - } - - /* Pull the GPIO low to select SET0 register, while we program SET1 */ - if (gpio >= 0) - gpio_direction_output(gpio, 0); + u32 offset_code; - step = volt_mv - TPS62361_BASE_VOLT_MV; - step /= 10; + volt_offset -= pmic->base_offset; - debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step); - if (omap_vc_bypass_send_value(TPS62361_I2C_SLAVE_ADDR, reg, step)) - puts("Scaling voltage failed for vdd_mpu from TPS\n"); + offset_code = (volt_offset + pmic->step - 1) / pmic->step; - /* Pull the GPIO high to select SET1 register */ - if (gpio >= 0) - gpio_direction_output(gpio, 1); + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + return offset_code + pmic->start_code; } -void do_scale_vcore(u32 vcore_reg, u32 volt_mv) +void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) { u32 offset_code; u32 offset = volt_mv; + int ret = 0; + + /* See if we can first get the GPIO if needed */ + if (pmic->gpio_en) + ret = gpio_request(pmic->gpio, "PMIC_GPIO"); + + if (ret < 0) { + printf("%s: gpio %d request failed %d\n", __func__, + pmic->gpio, ret); + return; + } + + /* Pull the GPIO low to select SET0 register, while we program SET1 */ + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 0); /* convert to uV for better accuracy in the calculations */ offset *= 1000; - offset_code = get_offset_code(offset); + offset_code = get_offset_code(offset, pmic); debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, offset_code); @@ -414,16 +512,46 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv) if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR, vcore_reg, offset_code)) printf("Scaling voltage failed for 0x%x\n", vcore_reg); + + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 1); +} + +/* + * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva + * We set the maximum voltages allowed here because Smart-Reflex is not + * enabled in bootloader. Voltage initialization in the kernel will set + * these to the nominal values after enabling Smart-Reflex + */ +void scale_vcores(struct vcores_data const *vcores) +{ + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + + do_scale_vcore(vcores->core.addr, vcores->core.value, + vcores->core.pmic); + + do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, + vcores->mpu.pmic); + + do_scale_vcore(vcores->mm.addr, vcores->mm.value, + vcores->mm.pmic); + + if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { + /* Configure LDO SRAM "magic" bits */ + writel(2, (*prcm)->prm_sldo_core_setup); + writel(2, (*prcm)->prm_sldo_mpu_setup); + writel(2, (*prcm)->prm_sldo_mm_setup); + } } -static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode) +static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) { clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Enable clock domain - %p\n", clkctrl_reg); + debug("Enable clock domain - %x\n", clkctrl_reg); } -static inline void wait_for_clk_enable(u32 *clkctrl_addr) +static inline void wait_for_clk_enable(u32 clkctrl_addr) { u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; u32 bound = LDELAY; @@ -435,19 +563,19 @@ static inline void wait_for_clk_enable(u32 *clkctrl_addr) idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> MODULE_CLKCTRL_IDLEST_SHIFT; if (--bound == 0) { - printf("Clock enable failed for 0x%p idlest 0x%x\n", + printf("Clock enable failed for 0x%x idlest 0x%x\n", clkctrl_addr, clkctrl); return; } } } -static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode, +static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode, u32 wait_for_enable) { clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Enable clock module - %p\n", clkctrl_addr); + debug("Enable clock module - %x\n", clkctrl_addr); if (wait_for_enable) wait_for_clk_enable(clkctrl_addr); } @@ -458,12 +586,12 @@ void freq_update_core(void) const struct dpll_params *core_dpll_params; u32 omap_rev = omap_revision(); - core_dpll_params = get_core_dpll_params(); + core_dpll_params = get_core_dpll_params(*dplls_data); /* Put EMIF clock domain in sw wakeup mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, + enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK | SHADOW_FREQ_CONFIG1_DLL_RESET_MASK; @@ -475,9 +603,9 @@ void freq_update_core(void) SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) & SHADOW_FREQ_CONFIG1_M2_DIV_MASK; - writel(freq_config1, &prcm->cm_shadow_freq_config1); + writel(freq_config1, (*prcm)->cm_shadow_freq_config1); if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0, - &prcm->cm_shadow_freq_config1, LDELAY)) { + (u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) { puts("FREQ UPDATE procedure failed!!"); hang(); } @@ -489,20 +617,20 @@ void freq_update_core(void) */ if (omap_rev != OMAP5430_ES1_0) { /* Put EMIF clock domain back in hw auto mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, + enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); } } -void bypass_dpll(u32 *const base) +void bypass_dpll(u32 const base) { do_bypass_dpll(base); wait_for_bypass(base); } -void lock_dpll(u32 *const base) +void lock_dpll(u32 const base) { do_lock_dpll(base); wait_for_lock(base); @@ -511,39 +639,39 @@ void lock_dpll(u32 *const base) void setup_clocks_for_console(void) { /* Do not add any spl_debug prints in this function */ - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_SW_WKUP << CD_CLKCTRL_CLKTRCTRL_SHIFT); /* Enable all UARTs - console will be on one of them */ - clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_HW_AUTO << CD_CLKCTRL_CLKTRCTRL_SHIFT); } -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, u8 wait_for_enable) { u32 i, max = 100; @@ -582,7 +710,7 @@ void prcm_init(void) case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: enable_basic_clocks(); - scale_vcores(); + scale_vcores(*omap_vcores); setup_dplls(); #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL setup_non_essential_dplls(); diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 88253cf..9eb1279 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -66,6 +66,19 @@ inline u32 emif_num(u32 base) return 0; } +/* + * Get SDRAM type connected to EMIF. + * Assuming similar SDRAM parts are connected to both EMIF's + * which is typically the case. So it is sufficient to get + * SDRAM type from EMIF1. + */ +u32 emif_sdram_type() +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + + return (readl(&emif->emif_sdram_config) & + EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT; +} static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) { @@ -110,11 +123,13 @@ void emif_reset_phy(u32 base) static void do_lpddr2_init(u32 base, u32 cs) { u32 mr_addr; + const struct lpddr2_mr_regs *mr_regs; + get_lpddr2_mr_regs(&mr_regs); /* Wait till device auto initialization is complete */ while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) ; - set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT); + set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10); /* * tZQINIT = 1 us * Enough loops assuming a maximum of 2GHz @@ -122,22 +137,18 @@ static void do_lpddr2_init(u32 base, u32 cs) sdelay(2000); - if (omap_revision() >= OMAP5430_ES1_0) - set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8); - else - set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3); - - set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY); + set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1); + set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16); /* * Enable refresh along with writing MR2 * Encoding of RL in MR2 is (RL - 2) */ mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK; - set_mr(base, cs, mr_addr, RL_FINAL - 2); + set_mr(base, cs, mr_addr, mr_regs->mr2); - if (omap_revision() >= OMAP5430_ES1_0) - set_mr(base, cs, LPDDR2_MR3, 0x1); + if (mr_regs->mr3 > 0) + set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3); } static void lpddr2_init(u32 base, const struct emif_regs *regs) @@ -255,9 +266,6 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs) static void ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 *ext_phy_ctrl_base = 0; - u32 *emif_ext_phy_ctrl_base = 0; - u32 i = 0; /* * Set SDRAM_CONFIG and PHY control registers to locked frequency @@ -277,27 +285,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); - ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1); - emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1); - - /* Configure external phy control timing registers */ - for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) { - writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); - } - - /* - * external phy 6-24 registers do not change with - * ddr frequency - */ - for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { - writel(ddr3_ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(ddr3_ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); - } + do_ext_phy_settings(base, regs); /* enable leveling */ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); @@ -1079,7 +1067,7 @@ static void do_sdram_init(u32 base) * OPP to another) */ if (!(in_sdram || warm_reset())) { - if (omap_revision() != OMAP5432_ES1_0) + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) lpddr2_init(base, regs); else ddr3_init(base, regs); @@ -1096,9 +1084,6 @@ void emif_post_init_config(u32 base) struct emif_reg_struct *emif = (struct emif_reg_struct *)base; u32 omap_rev = omap_revision(); - if (omap_rev == OMAP5430_ES1_0) - return; - /* reset phy on ES2.0 */ if (omap_rev == OMAP4430_ES2_0) emif_reset_phy(base); @@ -1206,7 +1191,7 @@ void dmm_init(u32 base) writel(lisa_map_regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); - if (omap_revision() >= OMAP4460_ES1_0) { + if (lisa_map_regs->is_ma_present) { hw_lisa_map_regs = (struct dmm_lisa_map_regs *)MA_BASE; @@ -1264,7 +1249,7 @@ void dmm_init(u32 base) void sdram_init(void) { u32 in_sdram, size_prog, size_detect; - u32 omap_rev = omap_revision(); + u32 sdram_type = emif_sdram_type(); debug(">>sdram_init()\n"); @@ -1275,10 +1260,10 @@ void sdram_init(void) debug("in_sdram = %d\n", in_sdram); if (!(in_sdram || warm_reset())) { - if (omap_rev != OMAP5432_ES1_0) - bypass_dpll(&prcm->cm_clkmode_dpll_core); + if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) + bypass_dpll((*prcm)->cm_clkmode_dpll_core); else - writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl); + writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); } if (!in_sdram) @@ -1298,7 +1283,7 @@ void sdram_init(void) } /* for the shadow registers to take effect */ - if (omap_rev != OMAP5432_ES1_0) + if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) freq_update_core(); /* Do some testing after the init */ diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 9ef10bd..05ff2e8 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -32,6 +32,8 @@ #include <asm/arch/sys_proto.h> #include <asm/sizes.h> #include <asm/emif.h> +#include <asm/omap_common.h> +#include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -79,12 +81,17 @@ u32 cortex_rev(void) void omap_rev_string(void) { u32 omap_rev = omap_revision(); + u32 soc_variant = (omap_rev & 0xF0000000) >> 28; u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16; u32 major_rev = (omap_rev & 0x00000F00) >> 8; u32 minor_rev = (omap_rev & 0x000000F0) >> 4; - printf("OMAP%x ES%x.%x\n", omap_variant, major_rev, - minor_rev); + if (soc_variant) + printf("OMAP"); + else + printf("DRA"); + printf("%x ES%x.%x\n", omap_variant, major_rev, + minor_rev); } #ifdef CONFIG_SPL_BUILD @@ -99,6 +106,10 @@ void spl_display_print(void) } #endif +void __weak srcomp_enable(void) +{ +} + /* * Routine: s_init * Description: Does early system init of watchdog, muxing, andclocks @@ -116,6 +127,8 @@ void spl_display_print(void) void s_init(void) { init_omap_revision(); + hw_data_init(); + #ifdef CONFIG_SPL_BUILD if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0)) force_emif_self_refresh(); @@ -123,6 +136,7 @@ void s_init(void) watchdog_init(); set_mux_conf_regs(); #ifdef CONFIG_SPL_BUILD + srcomp_enable(); setup_clocks_for_console(); gd = &gdata; @@ -235,10 +249,7 @@ int checkboard(void) */ u32 get_device_type(void) { - struct omap_sys_ctrl_regs *ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - return (readl(&ctrl->control_status) & + return (readl((*ctrl)->control_status) & (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT; } diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c index a045b77..e6e5f78 100644 --- a/arch/arm/cpu/armv7/omap-common/vc.c +++ b/arch/arm/cpu/armv7/omap-common/vc.c @@ -81,13 +81,13 @@ void omap_vc_init(u16 speed_khz) cycles_low -= 7; val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) | (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT); - writel(val, &prcm->prm_vc_cfg_i2c_clk); + writel(val, (*prcm)->prm_vc_cfg_i2c_clk); val = CONFIG_OMAP_VC_I2C_HS_MCODE << PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT; /* No HS mode for now */ val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT; - writel(val, &prcm->prm_vc_cfg_i2c_mode); + writel(val, (*prcm)->prm_vc_cfg_i2c_mode); } /** @@ -113,14 +113,15 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT | reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT | reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT; - writel(reg_val, &prcm->prm_vc_val_bypass); + writel(reg_val, (*prcm)->prm_vc_val_bypass); /* Signal VC to send data */ - writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, &prcm->prm_vc_val_bypass); + writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, + (*prcm)->prm_vc_val_bypass); /* Wait on VC to complete transmission */ do { - reg_val = readl(&prcm->prm_vc_val_bypass) & + reg_val = readl((*prcm)->prm_vc_val_bypass) & PRM_VC_VAL_BYPASS_VALID_BIT; if (!reg_val) break; diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 89c587e..c6d9a42 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -98,11 +98,11 @@ int board_mmc_init(bd_t *bis) { switch (spl_boot_device()) { case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); break; case BOOT_DEVICE_MMC2: case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0); + omap_mmc_init(1, 0, 0, -1, -1); break; } return 0; @@ -110,7 +110,7 @@ int board_mmc_init(bd_t *bis) void spl_board_init(void) { -#ifdef CONFIG_SPL_NAND_SUPPORT +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) gpmc_init(); #endif #ifdef CONFIG_SPL_I2C_SUPPORT diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile index 83160a2..40808d1 100644 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -27,8 +27,9 @@ LIB = $(obj)lib$(SOC).o COBJS += sdram_elpida.o COBJS += hwinit.o -COBJS += clocks.o COBJS += emif.o +COBJS += prcm-regs.o +COBJS += hw_data.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c deleted file mode 100644 index 12c5803..0000000 --- a/arch/arm/cpu/armv7/omap4/clocks.c +++ /dev/null @@ -1,517 +0,0 @@ -/* - * - * Clock initialization for OMAP4 - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * - * Based on previous work by: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Rajendra Nayak <rnayak@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/omap_common.h> -#include <asm/gpio.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/utils.h> -#include <asm/omap_gpio.h> - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif /* !CONFIG_SPL_BUILD */ - -struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100; - -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 13000000, /* 13 MHz */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 27000000, /* 27 MHz */ - 38400000, /* 38.4 MHz */ -}; - -/* - * The M & N values in the following tables are created using the - * following tool: - * tools/omap/clocks_get_m_n.c - * Please use this tool for creating the table for any new frequency. - */ - -/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */ -static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { - {175, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {700, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {401, 10, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {350, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {700, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {638, 34, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */ -static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {800, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {619, 12, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {800, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 5, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* dpll locked at 1200 MHz - MPU clk at 600 MHz */ -static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { - {50, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {600, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {250, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {300, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {200, 8, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ - {800, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ - {619, 12, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {125, 2, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {400, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ - {800, 26, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ - {125, 5, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { - {127, 1, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ - {762, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ - {635, 13, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {635, 15, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {381, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ - {254, 8, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ - {496, 24, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { - {200, 2, 2, 5, 8, 4, 6, 5}, /* 12 MHz */ - {800, 12, 2, 5, 8, 4, 6, 5}, /* 13 MHz */ - {619, 12, 2, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {125, 2, 2, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {400, 12, 2, 5, 8, 4, 6, 5}, /* 26 MHz */ - {800, 26, 2, 5, 8, 4, 6, 5}, /* 27 MHz */ - {125, 5, 2, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { - {64, 0, 8, 6, 12, 9, 4, 5}, /* 12 MHz */ - {768, 12, 8, 6, 12, 9, 4, 5}, /* 13 MHz */ - {320, 6, 8, 6, 12, 9, 4, 5}, /* 16.8 MHz */ - {40, 0, 8, 6, 12, 9, 4, 5}, /* 19.2 MHz */ - {384, 12, 8, 6, 12, 9, 4, 5}, /* 26 MHz */ - {256, 8, 8, 6, 12, 9, 4, 5}, /* 27 MHz */ - {20, 0, 8, 6, 12, 9, 4, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { - {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */ - {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */ - {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */ - {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */ - {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */ - {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */ - {291, 11, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */ - {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */ - {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */ - {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */ - {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */ - {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -void setup_post_dividers(u32 *const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->m4 >= 0) - writel(params->m4, &dpll_regs->cm_div_m4_dpll); - if (params->m5 >= 0) - writel(params->m5, &dpll_regs->cm_div_m5_dpll); - if (params->m6 >= 0) - writel(params->m6, &dpll_regs->cm_div_m6_dpll); - if (params->m7 >= 0) - writel(params->m7, &dpll_regs->cm_div_m7_dpll); -} - -/* - * Lock MPU dpll - * - * Resulting MPU frequencies: - * 4430 ES1.0 : 600 MHz - * 4430 ES2.x : 792 MHz (OPP Turbo) - * 4460 : 920 MHz (OPP Turbo) - DCC disabled - */ -const struct dpll_params *get_mpu_dpll_params(void) -{ - u32 omap_rev, sysclk_ind; - - omap_rev = omap_revision(); - sysclk_ind = get_sys_clk_index(); - - if (omap_rev == OMAP4430_ES1_0) - return &mpu_dpll_params_1200mhz[sysclk_ind]; - else if (omap_rev < OMAP4460_ES1_0) - return &mpu_dpll_params_1600mhz[sysclk_ind]; - else - return &mpu_dpll_params_1400mhz[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - - switch (omap_revision()) { - case OMAP4430_ES1_0: - return &core_dpll_params_es1_1524mhz[sysclk_ind]; - case OMAP4430_ES2_0: - case OMAP4430_SILICON_ID_INVALID: - /* safest */ - return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind]; - default: - return &core_dpll_params_1600mhz[sysclk_ind]; - } -} - - -const struct dpll_params *get_per_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &per_dpll_params_1536mhz[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &iva_dpll_params_1862mhz[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &usb_dpll_params_1920mhz[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(void) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; -#else - return &abe_dpll_params_32k_196608khz; -#endif -} - -/* - * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva - * We set the maximum voltages allowed here because Smart-Reflex is not - * enabled in bootloader. Voltage initialization in the kernel will set - * these to the nominal values after enabling Smart-Reflex - */ -void scale_vcores(void) -{ - u32 volt, omap_rev; - - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - - omap_rev = omap_revision(); - - /* - * Scale Voltage rails: - * 1. VDD_CORE - * 3. VDD_MPU - * 3. VDD_IVA - */ - if (omap_rev < OMAP4460_ES1_0) { - /* - * OMAP4430: - * VDD_CORE = TWL6030 VCORE3 - * VDD_MPU = TWL6030 VCORE1 - * VDD_IVA = TWL6030 VCORE2 - */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt); - - /* - * note on VDD_MPU: - * Setting a high voltage for Nitro mode as smart reflex is not - * enabled. We use the maximum possible value in the AVS range - * because the next higher voltage in the discrete range - * (code >= 0b111010) is way too high. - */ - volt = 1325; - do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); - - } else { - /* - * OMAP4460: - * VDD_CORE = TWL6030 VCORE1 - * VDD_MPU = TPS62361 - * VDD_IVA = TWL6030 VCORE2 - */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); - /* TPS62361 */ - volt = 1203; - do_scale_tps62361(TPS62361_VSEL0_GPIO, - TPS62361_REG_ADDR_SET1, volt); - /* VCORE 2 - supplies vdd_iva */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); - } -} - -u32 get_offset_code(u32 offset) -{ - u32 offset_code, step = 12660; /* 12.66 mV represented in uV */ - - if (omap_revision() == OMAP4430_ES1_0) - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV; - else - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV; - - offset_code = (offset + step - 1) / step; - - /* The code starts at 1 not 0 */ - return ++offset_code; -} - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 *const clk_domains_essential[] = { - &prcm->cm_l4per_clkstctrl, - &prcm->cm_l3init_clkstctrl, - &prcm->cm_memif_clkstctrl, - &prcm->cm_l4cfg_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3_2_gpmc_clkctrl, - &prcm->cm_memif_emif_1_clkctrl, - &prcm->cm_memif_emif_2_clkctrl, - &prcm->cm_l4cfg_l4_cfg_clkctrl, - &prcm->cm_wkup_gpio1_clkctrl, - &prcm->cm_l4per_gpio2_clkctrl, - &prcm->cm_l4per_gpio3_clkctrl, - &prcm->cm_l4per_gpio4_clkctrl, - &prcm->cm_l4per_gpio5_clkctrl, - &prcm->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_wkup_gptimer1_clkctrl, - &prcm->cm_l3init_hsmmc1_clkctrl, - &prcm->cm_l3init_hsmmc2_clkctrl, - &prcm->cm_l4per_gptimer2_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_l4per_uart3_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32(&prcm->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - /* Enable optional 48M functional clock for USB PHY */ - setbits_le32(&prcm->cm_l3init_usbphy_clkctrl, - USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -void enable_basic_uboot_clocks(void) -{ - u32 *const clk_domains_essential[] = { - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3init_hsusbotg_clkctrl, - &prcm->cm_l3init_usbphy_clkctrl, - &prcm->cm_l3init_usbphy_clkctrl, - &prcm->cm_clksel_usb_60mhz, - &prcm->cm_l3init_hsusbtll_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_l4per_mcspi1_clkctrl, - &prcm->cm_l4per_i2c1_clkctrl, - &prcm->cm_l4per_i2c2_clkctrl, - &prcm->cm_l4per_i2c3_clkctrl, - &prcm->cm_l4per_i2c4_clkctrl, - &prcm->cm_l3init_hsusbhost_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 *const clk_domains_non_essential[] = { - &prcm->cm_mpu_m3_clkstctrl, - &prcm->cm_ivahd_clkstctrl, - &prcm->cm_dsp_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sgx_clkstctrl, - &prcm->cm1_abe_clkstctrl, - &prcm->cm_c2c_clkstctrl, - &prcm->cm_cam_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sdma_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_non_essential[] = { - &prcm->cm_l3instr_l3_3_clkctrl, - &prcm->cm_l3instr_l3_instr_clkctrl, - &prcm->cm_l3instr_intrconn_wp1_clkctrl, - &prcm->cm_l3init_hsi_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_non_essential[] = { - &prcm->cm1_abe_aess_clkctrl, - &prcm->cm1_abe_pdm_clkctrl, - &prcm->cm1_abe_dmic_clkctrl, - &prcm->cm1_abe_mcasp_clkctrl, - &prcm->cm1_abe_mcbsp1_clkctrl, - &prcm->cm1_abe_mcbsp2_clkctrl, - &prcm->cm1_abe_mcbsp3_clkctrl, - &prcm->cm1_abe_slimbus_clkctrl, - &prcm->cm1_abe_timer5_clkctrl, - &prcm->cm1_abe_timer6_clkctrl, - &prcm->cm1_abe_timer7_clkctrl, - &prcm->cm1_abe_timer8_clkctrl, - &prcm->cm1_abe_wdt3_clkctrl, - &prcm->cm_l4per_gptimer9_clkctrl, - &prcm->cm_l4per_gptimer10_clkctrl, - &prcm->cm_l4per_gptimer11_clkctrl, - &prcm->cm_l4per_gptimer3_clkctrl, - &prcm->cm_l4per_gptimer4_clkctrl, - &prcm->cm_l4per_hdq1w_clkctrl, - &prcm->cm_l4per_mcbsp4_clkctrl, - &prcm->cm_l4per_mcspi2_clkctrl, - &prcm->cm_l4per_mcspi3_clkctrl, - &prcm->cm_l4per_mcspi4_clkctrl, - &prcm->cm_l4per_mmcsd3_clkctrl, - &prcm->cm_l4per_mmcsd4_clkctrl, - &prcm->cm_l4per_mmcsd5_clkctrl, - &prcm->cm_l4per_uart1_clkctrl, - &prcm->cm_l4per_uart2_clkctrl, - &prcm->cm_l4per_uart4_clkctrl, - &prcm->cm_wkup_keyboard_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_cam_iss_clkctrl, - &prcm->cm_cam_fdif_clkctrl, - &prcm->cm_dss_dss_clkctrl, - &prcm->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c new file mode 100644 index 0000000..7551b98 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -0,0 +1,491 @@ +/* + * + * HW data initialization for OMAP4 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/arch/clocks.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> + +struct prcm_regs const **prcm = + (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL; + +/* + * The M & N values in the following tables are created using the + * following tool: + * tools/omap/clocks_get_m_n.c + * Please use this tool for creating the table for any new frequency. + */ + +/* + * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF + * OMAP4460 OPP_NOM frequency + */ +static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { + {175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* + * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430) + * OMAP4430 OPP_TURBO frequency + */ +static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* + * dpll locked at 1200 MHz - MPU clk at 600 MHz + * OMAP4430 OPP_NOM frequency + */ +static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4460 OPP_NOM frequency */ +static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4430 ES1 OPP_NOM frequency */ +static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { + {127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4430 ES2.X OPP_NOM frequency */ +static const struct dpll_params + core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { + {200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { + {64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 12 MHz */ + {768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 13 MHz */ + {320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 26 MHz */ + {256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 27 MHz */ + {20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { + {931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +struct dplls omap4430_dplls_es1 = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_es1_1524mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap4430_dplls = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap4460_dplls = { + .mpu = mpu_dpll_params_1400mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct pmic_data twl6030_4430es1 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, + .step = 12660, /* 10 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, +}; + +struct pmic_data twl6030 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, + .step = 12660, /* 10 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, +}; + +struct pmic_data tps62361 = { + .base_offset = TPS62361_BASE_VOLT_MV, + .step = 10000, /* 10 mV represented in uV */ + .start_code = 0, + .gpio = TPS62361_VSEL0_GPIO, + .gpio_en = 1 +}; + +struct vcores_data omap4430_volts_es1 = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030_4430es1, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030_4430es1, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030_4430es1, +}; + +struct vcores_data omap4430_volts = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030, +}; + +struct vcores_data omap4460_volts = { + .mpu.value = 1203, + .mpu.addr = TPS62361_REG_ADDR_SET1, + .mpu.pmic = &tps62361, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE1, + .core.pmic = &tps62361, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &tps62361, +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + /* Enable optional 48M functional clock for USB PHY */ + setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl, + USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3init_hsusbotg_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_clksel_usb_60mhz, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + (*prcm)->cm_l4per_mcbsp4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +void hw_data_init(void) +{ + u32 omap_rev = omap_revision(); + + (*prcm) = &omap4_prcm; + + switch (omap_rev) { + + case OMAP4430_ES1_0: + *dplls_data = &omap4430_dplls_es1; + *omap_vcores = &omap4430_volts_es1; + break; + + case OMAP4430_ES2_0: + case OMAP4430_ES2_1: + case OMAP4430_ES2_2: + case OMAP4430_ES2_3: + *dplls_data = &omap4430_dplls; + *omap_vcores = &omap4430_volts; + break; + + case OMAP4460_ES1_0: + case OMAP4460_ES1_1: + *dplls_data = &omap4460_dplls; + *omap_vcores = &omap4460_volts; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } + + *ctrl = &omap4_ctrl; +} diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index f4123aa..2db517b 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -57,10 +57,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; void do_io_settings(void) { u32 lpddr2io; - struct control_lpddr2io_regs *lpddr2io_regs = - (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE; u32 omap4_rev = omap_revision(); @@ -72,20 +68,20 @@ void do_io_settings(void) lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; /* EMIF1 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1); + writel(lpddr2io, (*ctrl)->control_lpddr2io1_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io1_1); /* No pull for GR10 as per hw team's recommendation */ writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io1_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3); + (*ctrl)->control_lpddr2io1_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3); /* EMIF2 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1); + writel(lpddr2io, (*ctrl)->control_lpddr2io2_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io2_1); /* No pull for GR10 as per hw team's recommendation */ writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io2_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3); + (*ctrl)->control_lpddr2io2_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3); /* * Some of these settings (TRIM values) come from eFuse and are @@ -93,16 +89,16 @@ void do_io_settings(void) * calibration of the device. Do the software over-ride only if * the device is not correctly trimmed */ - if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) { + if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) { writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_iva_voltage_ctrl); + (*ctrl)->control_ldosram_iva_voltage_ctrl); writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_mpu_voltage_ctrl); + (*ctrl)->control_ldosram_mpu_voltage_ctrl); writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_core_voltage_ctrl); + (*ctrl)->control_ldosram_core_voltage_ctrl); } /* @@ -110,11 +106,11 @@ void do_io_settings(void) * i. unconditionally for all 4430 * ii. only if un-trimmed for 4460 */ - if (!readl(&ctrl->control_efuse_1)) - writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1); + if (!readl((*ctrl)->control_efuse_1)) + writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1); - if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2)) - writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2); + if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2)) + writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2); } #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c new file mode 100644 index 0000000..7225a30 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c @@ -0,0 +1,315 @@ +/* + * + * HW regs data for OMAP4 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/omap_common.h> + +struct prcm_regs const omap4_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_m4_dpll_core = 0x4a004138, + .cm_div_m5_dpll_core = 0x4a00413c, + .cm_div_m6_dpll_core = 0x4a004140, + .cm_div_m7_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_emu_override_dpll_core = 0x4a004150, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_m4_dpll_iva = 0x4a0041b8, + .cm_div_m5_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_m4_dpll_ddrphy = 0x4a004238, + .cm_div_m5_dpll_ddrphy = 0x4a00423c, + .cm_div_m6_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_m4_dpll_per = 0x4a008158, + .cm_div_m5_dpll_per = 0x4a00815c, + .cm_div_m6_dpll_per = 0x4a008160, + .cm_div_m7_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkct = 0x4a008e40, + .cm_ivahd_clkstctrl = 0x4a008f00, + + /* cm2.ivahd */ + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_iss_clkctrl = 0x4a009020, + .cm_cam_fdif_clkctrl = 0x4a009028, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsi_clkctrl = 0x4a009338, + .cm_l3init_hsusbhost_clkctrl = 0x4a009358, + .cm_l3init_hsusbotg_clkctrl = 0x4a009360, + .cm_l3init_hsusbtll_clkctrl = 0x4a009368, + .cm_l3init_p1500_clkctrl = 0x4a009378, + .cm_l3init_fsusb_clkctrl = 0x4a0093d0, + .cm_l3init_usbphy_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009400, + .cm_l4per_dynamicdep = 0x4a009408, + .cm_l4per_adc_clkctrl = 0x4a009420, + .cm_l4per_gptimer10_clkctrl = 0x4a009428, + .cm_l4per_gptimer11_clkctrl = 0x4a009430, + .cm_l4per_gptimer2_clkctrl = 0x4a009438, + .cm_l4per_gptimer3_clkctrl = 0x4a009440, + .cm_l4per_gptimer4_clkctrl = 0x4a009448, + .cm_l4per_gptimer9_clkctrl = 0x4a009450, + .cm_l4per_elm_clkctrl = 0x4a009458, + .cm_l4per_gpio2_clkctrl = 0x4a009460, + .cm_l4per_gpio3_clkctrl = 0x4a009468, + .cm_l4per_gpio4_clkctrl = 0x4a009470, + .cm_l4per_gpio5_clkctrl = 0x4a009478, + .cm_l4per_gpio6_clkctrl = 0x4a009480, + .cm_l4per_hdq1w_clkctrl = 0x4a009488, + .cm_l4per_hecc1_clkctrl = 0x4a009490, + .cm_l4per_hecc2_clkctrl = 0x4a009498, + .cm_l4per_i2c1_clkctrl = 0x4a0094a0, + .cm_l4per_i2c2_clkctrl = 0x4a0094a8, + .cm_l4per_i2c3_clkctrl = 0x4a0094b0, + .cm_l4per_i2c4_clkctrl = 0x4a0094b8, + .cm_l4per_l4per_clkctrl = 0x4a0094c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, + .cm_l4per_mcbsp4_clkctrl = 0x4a0094e0, + .cm_l4per_mgate_clkctrl = 0x4a0094e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009500, + .cm_l4per_mcspi4_clkctrl = 0x4a009508, + .cm_l4per_mmcsd3_clkctrl = 0x4a009520, + .cm_l4per_mmcsd4_clkctrl = 0x4a009528, + .cm_l4per_msprohg_clkctrl = 0x4a009530, + .cm_l4per_slimbus2_clkctrl = 0x4a009538, + .cm_l4per_uart1_clkctrl = 0x4a009540, + .cm_l4per_uart2_clkctrl = 0x4a009548, + .cm_l4per_uart3_clkctrl = 0x4a009550, + .cm_l4per_uart4_clkctrl = 0x4a009558, + .cm_l4per_mmcsd5_clkctrl = 0x4a009560, + .cm_l4per_i2c5_clkctrl = 0x4a009568, + .cm_l4sec_clkstctrl = 0x4a009580, + .cm_l4sec_staticdep = 0x4a009584, + .cm_l4sec_dynamicdep = 0x4a009588, + .cm_l4sec_aes1_clkctrl = 0x4a0095a0, + .cm_l4sec_aes2_clkctrl = 0x4a0095a8, + .cm_l4sec_des3des_clkctrl = 0x4a0095b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, + .cm_l4sec_rng_clkctrl = 0x4a0095c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4a30610c, + .cm_sys_clksel = 0x4a306110, + .cm_wkup_clkstctrl = 0x4a307800, + .cm_wkup_l4wkup_clkctrl = 0x4a307820, + .cm_wkup_wdtimer1_clkctrl = 0x4a307828, + .cm_wkup_wdtimer2_clkctrl = 0x4a307830, + .cm_wkup_gpio1_clkctrl = 0x4a307838, + .cm_wkup_gptimer1_clkctrl = 0x4a307840, + .cm_wkup_gptimer12_clkctrl = 0x4a307848, + .cm_wkup_synctimer_clkctrl = 0x4a307850, + .cm_wkup_usim_clkctrl = 0x4a307858, + .cm_wkup_sarram_clkctrl = 0x4a307860, + .cm_wkup_keyboard_clkctrl = 0x4a307878, + .cm_wkup_rtc_clkctrl = 0x4a307880, + .cm_wkup_bandgap_clkctrl = 0x4a307888, + .prm_vc_val_bypass = 0x4a307ba0, + .prm_vc_cfg_channel = 0x4a307ba4, + .prm_vc_cfg_i2c_mode = 0x4a307ba8, + .prm_vc_cfg_i2c_clk = 0x4a307bac, +}; + +struct omap_sys_ctrl_regs const omap4_ctrl = { + .control_id_code = 0x4A002204, + .control_std_fuse_opp_bgap = 0x4a002260, + .control_status = 0x4a0022c4, + .control_ldosram_iva_voltage_ctrl = 0x4A002320, + .control_ldosram_mpu_voltage_ctrl = 0x4A002324, + .control_ldosram_core_voltage_ctrl = 0x4A002328, + .control_pbiaslite = 0x4A100600, + .control_lpddr2io1_0 = 0x4A100638, + .control_lpddr2io1_1 = 0x4A10063C, + .control_lpddr2io1_2 = 0x4A100640, + .control_lpddr2io1_3 = 0x4A100644, + .control_lpddr2io2_0 = 0x4A100648, + .control_lpddr2io2_1 = 0x4A10064C, + .control_lpddr2io2_2 = 0x4A100650, + .control_lpddr2io2_3 = 0x4A100654, + .control_efuse_1 = 0x4A100700, + .control_efuse_2 = 0x4A100704, +}; diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c index b9128fa..20fc552 100644 --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c @@ -90,21 +90,28 @@ const struct emif_regs emif_regs_elpida_400_mhz_2cs = { .emif_ddr_phy_ctlr_1 = 0x049ff418 }; -/* Dummy registers for OMAP44xx */ -const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; - const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { .dmm_lisa_map_0 = 0xFF020100, .dmm_lisa_map_1 = 0, .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80540300 + .dmm_lisa_map_3 = 0x80540300, + .is_ma_present = 0x0 }; const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { .dmm_lisa_map_0 = 0xFF020100, .dmm_lisa_map_1 = 0, .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80640300 + .dmm_lisa_map_3 = 0x80640300, + .is_ma_present = 0x0 +}; + +const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80640300, + .is_ma_present = 0x1 }; static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) @@ -129,8 +136,10 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs if (omap_rev == OMAP4430_ES1_0) *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; - else + else if (omap_rev < OMAP4460_ES1_0) *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; + else + *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2; } void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) @@ -284,3 +293,16 @@ void emif_get_device_timings(u32 emif_nr, __attribute__((weak, alias("emif_get_device_timings_sdp"))); #endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ + +const struct lpddr2_mr_regs mr_regs = { + .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3, + .mr2 = 0x4, + .mr3 = -1, + .mr10 = MR10_ZQ_ZQINIT, + .mr16 = MR16_REF_FULL_ARRAY +}; + +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) +{ + *regs = &mr_regs; +} diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index 9b261c4..ce00e2c 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -26,9 +26,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS += hwinit.o -COBJS += clocks.o COBJS += emif.o COBJS += sdram.o +COBJS += prcm-regs.o +COBJS += hw_data.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c deleted file mode 100644 index eecfbad..0000000 --- a/arch/arm/cpu/armv7/omap5/clocks.c +++ /dev/null @@ -1,494 +0,0 @@ -/* - * - * Clock initialization for OMAP5 - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * Sricharan R <r.sricharan@ti.com> - * - * Based on previous work by: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Rajendra Nayak <rnayak@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/omap_common.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/utils.h> -#include <asm/omap_gpio.h> - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif - -struct omap5_prcm_regs *const prcm = (struct omap5_prcm_regs *)0x4A004100; - -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 0, /* NA */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 0, /* NA */ - 38400000, /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { - {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = { - {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { - {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { - {200, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = { - {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { - {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */ - {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */ - {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { - {266, 2, 4, 5, 8, 8, 62, 10, 10, 14}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {570, 8, 4, 5, 8, 8, 62, 10, 10, 14}, /* 16.8 MHz */ - {665, 11, 4, 5, 8, 8, 62, 10, 10, 14}, /* 19.2 MHz */ - {532, 12, 4, 8, 8, 8, 62, 10, 10, 14}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 4, 8, 8, 8, 62, 10, 10, 14} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { - {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { - {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {2011, 28, -1, -1, 5, 6, -1, -1, -1, -1}, /* 16.8 MHz */ - {1881, 30, -1, -1, 5, 6, -1, -1, -1, -1}, /* 19.2 MHz */ - {1165, 25, -1, -1, 5, 6, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1972, 64, -1, -1, 5, 6, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {400, 4, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {400, 7, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {400, 15, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -void setup_post_dividers(u32 *const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->h11 >= 0) - writel(params->h11, &dpll_regs->cm_div_h11_dpll); - if (params->h12 >= 0) - writel(params->h12, &dpll_regs->cm_div_h12_dpll); - if (params->h13 >= 0) - writel(params->h13, &dpll_regs->cm_div_h13_dpll); - if (params->h14 >= 0) - writel(params->h14, &dpll_regs->cm_div_h14_dpll); - if (params->h22 >= 0) - writel(params->h22, &dpll_regs->cm_div_h22_dpll); - if (params->h23 >= 0) - writel(params->h23, &dpll_regs->cm_div_h23_dpll); -} - -const struct dpll_params *get_mpu_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &mpu_dpll_params_800mhz[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - - /* Configuring the DDR to be at 532mhz */ - return &core_dpll_params_2128mhz_ddr532[sysclk_ind]; -} - -const struct dpll_params *get_per_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &per_dpll_params_768mhz[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &iva_dpll_params_2330mhz[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &usb_dpll_params_1920mhz[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(void) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; -#else - return &abe_dpll_params_32k_196608khz; -#endif -} - -/* - * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva - * We set the maximum voltages allowed here because Smart-Reflex is not - * enabled in bootloader. Voltage initialization in the kernel will set - * these to the nominal values after enabling Smart-Reflex - */ -void scale_vcores(void) -{ - u32 volt_core, volt_mpu, volt_mm; - - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - - /* Palmas settings */ - if (omap_revision() != OMAP5432_ES1_0) { - volt_core = VDD_CORE; - volt_mpu = VDD_MPU; - volt_mm = VDD_MM; - } else { - volt_core = VDD_CORE_5432; - volt_mpu = VDD_MPU_5432; - volt_mm = VDD_MM_5432; - } - - do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt_core); - do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt_mpu); - do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt_mm); - - if (omap_revision() == OMAP5432_ES1_0) { - /* Configure LDO SRAM "magic" bits */ - writel(2, &prcm->prm_sldo_core_setup); - writel(2, &prcm->prm_sldo_mpu_setup); - writel(2, &prcm->prm_sldo_mm_setup); - } -} - -u32 get_offset_code(u32 volt_offset) -{ - u32 offset_code, step = 10000; /* 10 mV represented in uV */ - - volt_offset -= PALMAS_SMPS_BASE_VOLT_UV; - - offset_code = (volt_offset + step - 1) / step; - - /* - * Offset codes 1-6 all give the base voltage in Palmas - * Offset code 0 switches OFF the SMPS - */ - return offset_code + 6; -} - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 *const clk_domains_essential[] = { - &prcm->cm_l4per_clkstctrl, - &prcm->cm_l3init_clkstctrl, - &prcm->cm_memif_clkstctrl, - &prcm->cm_l4cfg_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3_2_gpmc_clkctrl, - &prcm->cm_memif_emif_1_clkctrl, - &prcm->cm_memif_emif_2_clkctrl, - &prcm->cm_l4cfg_l4_cfg_clkctrl, - &prcm->cm_wkup_gpio1_clkctrl, - &prcm->cm_l4per_gpio2_clkctrl, - &prcm->cm_l4per_gpio3_clkctrl, - &prcm->cm_l4per_gpio4_clkctrl, - &prcm->cm_l4per_gpio5_clkctrl, - &prcm->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_wkup_gptimer1_clkctrl, - &prcm->cm_l3init_hsmmc1_clkctrl, - &prcm->cm_l3init_hsmmc2_clkctrl, - &prcm->cm_l4per_gptimer2_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_l4per_uart3_clkctrl, - &prcm->cm_l4per_i2c1_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32(&prcm->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Set the correct clock dividers for mmc */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); - - /* Select 384Mhz for GPU as its the POR for ES1.0 */ - setbits_le32(&prcm->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_HYD_GCLK_MASK); - setbits_le32(&prcm->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_CORE_GCLK_MASK); - - /* Enable SCRM OPT clocks for PER and CORE dpll */ - setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_PER_MASK); - setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_CORE_MASK); -} - -void enable_basic_uboot_clocks(void) -{ - u32 *const clk_domains_essential[] = { - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_l4per_mcspi1_clkctrl, - &prcm->cm_l4per_i2c2_clkctrl, - &prcm->cm_l4per_i2c3_clkctrl, - &prcm->cm_l4per_i2c4_clkctrl, - &prcm->cm_l3init_hsusbtll_clkctrl, - &prcm->cm_l3init_hsusbhost_clkctrl, - &prcm->cm_l3init_fsusb_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 *const clk_domains_non_essential[] = { - &prcm->cm_mpu_m3_clkstctrl, - &prcm->cm_ivahd_clkstctrl, - &prcm->cm_dsp_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sgx_clkstctrl, - &prcm->cm1_abe_clkstctrl, - &prcm->cm_c2c_clkstctrl, - &prcm->cm_cam_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sdma_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_non_essential[] = { - &prcm->cm_mpu_m3_mpu_m3_clkctrl, - &prcm->cm_ivahd_ivahd_clkctrl, - &prcm->cm_ivahd_sl2_clkctrl, - &prcm->cm_dsp_dsp_clkctrl, - &prcm->cm_l3instr_l3_3_clkctrl, - &prcm->cm_l3instr_l3_instr_clkctrl, - &prcm->cm_l3instr_intrconn_wp1_clkctrl, - &prcm->cm_l3init_hsi_clkctrl, - &prcm->cm_l4per_hdq1w_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_non_essential[] = { - &prcm->cm1_abe_aess_clkctrl, - &prcm->cm1_abe_pdm_clkctrl, - &prcm->cm1_abe_dmic_clkctrl, - &prcm->cm1_abe_mcasp_clkctrl, - &prcm->cm1_abe_mcbsp1_clkctrl, - &prcm->cm1_abe_mcbsp2_clkctrl, - &prcm->cm1_abe_mcbsp3_clkctrl, - &prcm->cm1_abe_slimbus_clkctrl, - &prcm->cm1_abe_timer5_clkctrl, - &prcm->cm1_abe_timer6_clkctrl, - &prcm->cm1_abe_timer7_clkctrl, - &prcm->cm1_abe_timer8_clkctrl, - &prcm->cm1_abe_wdt3_clkctrl, - &prcm->cm_l4per_gptimer9_clkctrl, - &prcm->cm_l4per_gptimer10_clkctrl, - &prcm->cm_l4per_gptimer11_clkctrl, - &prcm->cm_l4per_gptimer3_clkctrl, - &prcm->cm_l4per_gptimer4_clkctrl, - &prcm->cm_l4per_mcspi2_clkctrl, - &prcm->cm_l4per_mcspi3_clkctrl, - &prcm->cm_l4per_mcspi4_clkctrl, - &prcm->cm_l4per_mmcsd3_clkctrl, - &prcm->cm_l4per_mmcsd4_clkctrl, - &prcm->cm_l4per_mmcsd5_clkctrl, - &prcm->cm_l4per_uart1_clkctrl, - &prcm->cm_l4per_uart2_clkctrl, - &prcm->cm_l4per_uart4_clkctrl, - &prcm->cm_wkup_keyboard_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_cam_iss_clkctrl, - &prcm->cm_cam_fdif_clkctrl, - &prcm->cm_dss_dss_clkctrl, - &prcm->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c new file mode 100644 index 0000000..ced274e --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -0,0 +1,596 @@ +/* + * + * HW data initialization for OMAP5 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/arch/clocks.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> +#include <asm/emif.h> + +struct prcm_regs const **prcm = + (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL; + +/* OPP HIGH FREQUENCY for ES2.0 */ +static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { + {125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP NOM FREQUENCY for ES2.0, OPP HIGH for ES1.0 */ +static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { + {275, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {550, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP NOM FREQUENCY for ES1.0 */ +static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP LOW FREQUENCY for ES1.0 */ +static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { + {200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP LOW FREQUENCY for ES2.0 */ +static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = { + {499, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {297, 9, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {493, 18, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {499, 25, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = { + {250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */ + {277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */ + {368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */ + {277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */ + {368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = { + {266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 16.8 MHz */ + {277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 19.2 MHz */ + {368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 38.4 MHz */ + {266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6} /* 20 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { + {266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 16.8 MHz */ + {277, 4, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 19.2 MHz */ + {368, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = { + {266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 16.8 MHz */ + {277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 19.2 MHz */ + {368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { + {32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */ + {96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { + {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = { + {533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +struct dplls omap5_dplls_es1 = { + .mpu = mpu_dpll_params_800mhz, + .core = core_dpll_params_2128mhz_ddr532, + .per = per_dpll_params_768mhz, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap5_dplls_es2 = { + .mpu = mpu_dpll_params_1100mhz, + .core = core_dpll_params_2128mhz_ddr532_es2, + .per = per_dpll_params_768mhz_es2, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls dra7xx_dplls = { + .mpu = mpu_dpll_params_1ghz, + .core = core_dpll_params_2128mhz_ddr532_dra7xx, + .per = per_dpll_params_768mhz_dra7xx, + .usb = usb_dpll_params_1920mhz, + .ddr = ddr_dpll_params_1066mhz, +}; + +struct pmic_data palmas = { + .base_offset = PALMAS_SMPS_BASE_VOLT_UV, + .step = 10000, /* 10 mV represented in uV */ + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + .start_code = 6, +}; + +struct vcores_data omap5430_volts = { + .mpu.value = VDD_MPU, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +struct vcores_data omap5430_volts_es2 = { + .mpu.value = VDD_MPU_ES2, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE_ES2, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM_ES2, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Set the correct clock dividers for mmc */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); + + /* Select 384Mhz for GPU as its the POR for ES1.0 */ + setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, + CLKSEL_GPU_HYD_GCLK_MASK); + setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, + CLKSEL_GPU_CORE_GCLK_MASK); + + /* Enable SCRM OPT clocks for PER and CORE dpll */ + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_PER_MASK); + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_CORE_MASK); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + (*prcm)->cm_l3init_fsusb_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_mpu_m3_mpu_m3_clkctrl, + (*prcm)->cm_ivahd_ivahd_clkctrl, + (*prcm)->cm_ivahd_sl2_clkctrl, + (*prcm)->cm_dsp_dsp_clkctrl, + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +const struct ctrl_ioregs ioregs_omap5430 = { + .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, + .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, + .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, + .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, +}; + +const struct ctrl_ioregs ioregs_omap5432_es1 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + +const struct ctrl_ioregs ioregs_omap5432_es2 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + +void hw_data_init(void) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + + case OMAP5430_ES1_0: + case OMAP5432_ES1_0: + *prcm = &omap5_es1_prcm; + *dplls_data = &omap5_dplls_es1; + *omap_vcores = &omap5430_volts; + *ctrl = &omap5_ctrl; + break; + + case OMAP5430_ES2_0: + case OMAP5432_ES2_0: + *prcm = &omap5_es2_prcm; + *dplls_data = &omap5_dplls_es2; + *omap_vcores = &omap5430_volts_es2; + *ctrl = &omap5_ctrl; + break; + + case DRA752_ES1_0: + *prcm = &dra7xx_prcm; + *dplls_data = &dra7xx_dplls; + *omap_vcores = &omap5430_volts_es2; + *ctrl = &dra7xx_ctrl; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} + +void get_ioregs(const struct ctrl_ioregs **regs) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + *regs = &ioregs_omap5430; + break; + case OMAP5432_ES1_0: + *regs = &ioregs_omap5432_es1; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + *regs = &ioregs_omap5432_es2; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index d0c3ff7..2f4b247 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -32,6 +32,7 @@ #include <asm/armv7.h> #include <asm/arch/cpu.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/clocks.h> #include <asm/sizes.h> #include <asm/utils.h> #include <asm/arch/gpio.h> @@ -56,76 +57,58 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; /* LPDDR2 specific IO settings */ static void io_settings_lpddr2(void) { - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_1)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_1)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_1)); - writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, - &(ioregs_base->control_ddrio_0)); - writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, - &(ioregs_base->control_ddrio_1)); - writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, - &(ioregs_base->control_ddrio_2)); + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); } /* DDR3 specific IO settings */ static void io_settings_ddr3(void) { u32 io_settings = 0; - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddr3ch1_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch1_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch1_1)); - - writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddr3ch2_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch2_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch2_1)); - - writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_0)); - writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_1)); - writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_2)); + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); /* omap5432 does not use lpddr2 */ - writel(0x0, &(ioregs_base->control_lpddr2ch1_0)); - writel(0x0, &(ioregs_base->control_lpddr2ch1_1)); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); - writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - &(ioregs_base->control_emif1_sdram_config_ext)); - writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - &(ioregs_base->control_emif2_sdram_config_ext)); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif1_sdram_config_ext); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif2_sdram_config_ext); /* Disable DLL select */ - io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config)) + io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) & 0xFFEFFFFF); writel(io_settings, - &(ioregs_base->control_port_emif1_sdram_config)); + (*ctrl)->control_port_emif1_sdram_config); - io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config)) + io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) & 0xFFEFFFFF); writel(io_settings, - &(ioregs_base->control_port_emif2_sdram_config)); + (*ctrl)->control_port_emif2_sdram_config); } /* @@ -134,88 +117,198 @@ static void io_settings_ddr3(void) void do_io_settings(void) { u32 io_settings = 0, mask = 0; - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; /* Impedance settings EMMC, C2C 1,2, hsi2 */ mask = (ds_mask << 2) | (ds_mask << 8) | (ds_mask << 16) | (ds_mask << 18); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_0) & (~mask); io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) | (ds_45_ohm << 18) | (ds_60_ohm << 2); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_0)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_0); /* Impedance settings Mcspi2 */ mask = (ds_mask << 30); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_1) & (~mask); io_settings |= (ds_60_ohm << 30); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_1); /* Impedance settings C2C 3,4 */ mask = (ds_mask << 14) | (ds_mask << 16); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_2) & (~mask); io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_2)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_2); /* Slew rate settings EMMC, C2C 1,2 */ mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_0) & (~mask); io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_0)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_0); /* Slew rate settings hsi2, Mcspi2 */ mask = (sc_mask << 24) | (sc_mask << 28); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_1) & (~mask); io_settings |= (sc_fast << 28) | (sc_fast << 24); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_1); /* Slew rate settings C2C 3,4 */ mask = (sc_mask << 16) | (sc_mask << 18); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_2) & (~mask); io_settings |= (sc_na << 16) | (sc_na << 18); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_2)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_2); /* impedance and slew rate settings for usb */ mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) | (usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14); - io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart3io_padconf_1) & (~mask); io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) | (ds_60_ohm << 23) | (sc_fast << 20) | (sc_fast << 17) | (sc_fast << 14); - writel(io_settings, &(ioregs_base->control_smart3io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart3io_padconf_1); - if (omap_revision() <= OMAP5430_ES1_0) + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) io_settings_lpddr2(); else io_settings_ddr3(); /* Efuse settings */ - writel(EFUSE_1, &(ioregs_base->control_efuse_1)); - writel(EFUSE_2, &(ioregs_base->control_efuse_2)); - writel(EFUSE_3, &(ioregs_base->control_efuse_3)); - writel(EFUSE_4, &(ioregs_base->control_efuse_4)); + writel(EFUSE_1, (*ctrl)->control_efuse_1); + writel(EFUSE_2, (*ctrl)->control_efuse_2); + writel(EFUSE_3, (*ctrl)->control_efuse_3); + writel(EFUSE_4, (*ctrl)->control_efuse_4); +} + +static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = { + {0x45, 0x1}, /* 12 MHz */ + {-1, -1}, /* 13 MHz */ + {0x63, 0x2}, /* 16.8 MHz */ + {0x57, 0x2}, /* 19.2 MHz */ + {0x20, 0x1}, /* 26 MHz */ + {-1, -1}, /* 27 MHz */ + {0x41, 0x3} /* 38.4 MHz */ +}; + +void srcomp_enable(void) +{ + u32 srcomp_value, mul_factor, div_factor, clk_val, i; + u32 sysclk_ind = get_sys_clk_index(); + u32 omap_rev = omap_revision(); + + mul_factor = srcomp_parameters[sysclk_ind].multiply_factor; + div_factor = srcomp_parameters[sysclk_ind].divide_factor; + + for (i = 0; i < 4; i++) { + srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= + ~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK); + srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | + (div_factor << DIVIDE_FACTOR_XS_SHIFT); + writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4); + } + + if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) { + clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); + + for (i = 0; i < 4; i++) { + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~PWRDWN_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + + while (((readl((*ctrl)->control_srcomp_north_side + i*4) + & SRCODE_READ_XS_MASK) >> + SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + } else { + srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK | + DIVIDE_FACTOR_XS_MASK); + srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | + (div_factor << DIVIDE_FACTOR_XS_SHIFT); + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + for (i = 0; i < 4; i++) { + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); + + clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl); + + for (i = 0; i < 4; i++) { + while (((readl((*ctrl)->control_srcomp_north_side + i*4) + & SRCODE_READ_XS_MASK) >> + SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + + while (((readl((*ctrl)->control_srcomp_east_side_wkup) & + SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + } } #endif void config_data_eye_leveling_samples(u32 emif_base) { - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - /*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/ if (emif_base == EMIF1_BASE) writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, - &(ioregs_base->control_emif1_sdram_config_ext)); + (*ctrl)->control_emif1_sdram_config_ext); else if (emif_base == EMIF2_BASE) writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, - &(ioregs_base->control_emif2_sdram_config_ext)); + (*ctrl)->control_emif2_sdram_config_ext); } void init_omap_revision(void) @@ -227,17 +320,25 @@ void init_omap_revision(void) */ unsigned int rev = cortex_rev(); - switch (rev) { - case MIDR_CORTEX_A15_R0P0: - switch (readl(CONTROL_ID_CODE)) { - case OMAP5430_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = OMAP5430_ES1_0; - break; - case OMAP5432_CONTROL_ID_CODE_ES1_0: - default: - *omap_si_rev = OMAP5432_ES1_0; - break; - } + switch (readl(CONTROL_ID_CODE)) { + case OMAP5430_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP5430_ES1_0; + if (rev == MIDR_CORTEX_A15_R2P2) + *omap_si_rev = OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP5432_ES1_0; + if (rev == MIDR_CORTEX_A15_R2P2) + *omap_si_rev = OMAP5432_ES2_0; + break; + case OMAP5430_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP5432_ES2_0; + break; + case DRA752_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = DRA752_ES1_0; break; default: *omap_si_rev = OMAP5430_SILICON_ID_INVALID; @@ -253,7 +354,12 @@ void reset_cpu(ulong ignored) * So use cold reset in case instead. */ if (omap_rev == OMAP5430_ES1_0) - writel(PRM_RSTCTRL_RESET << 0x1, PRM_RSTCTRL); + writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl); else - writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL); + writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl); +} + +u32 warm_reset(void) +{ + return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK; } diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c new file mode 100644 index 0000000..b8a61fe --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -0,0 +1,958 @@ +/* + * + * HW regs data for OMAP5 Soc + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/omap_common.h> + +struct prcm_regs const omap5_es1_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_h11_dpll_core = 0x4a004138, + .cm_div_h12_dpll_core = 0x4a00413c, + .cm_div_h13_dpll_core = 0x4a004140, + .cm_div_h14_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_emu_override_dpll_core = 0x4a004150, + .cm_div_h22_dpllcore = 0x4a004154, + .cm_div_h23_dpll_core = 0x4a004158, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_h11_dpll_iva = 0x4a0041b8, + .cm_div_h12_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_h11_dpll_ddrphy = 0x4a004238, + .cm_div_h12_dpll_ddrphy = 0x4a00423c, + .cm_div_h13_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + + /* cm2.core */ + .cm_coreaon_bandgap_clkctrl = 0x4a008648, + .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a008f00, + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_iss_clkctrl = 0x4a009020, + .cm_cam_fdif_clkctrl = 0x4a009028, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsi_clkctrl = 0x4a009338, + .cm_l3init_hsusbhost_clkctrl = 0x4a009358, + .cm_l3init_hsusbotg_clkctrl = 0x4a009360, + .cm_l3init_hsusbtll_clkctrl = 0x4a009368, + .cm_l3init_p1500_clkctrl = 0x4a009378, + .cm_l3init_fsusb_clkctrl = 0x4a0093d0, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009400, + .cm_l4per_dynamicdep = 0x4a009408, + .cm_l4per_adc_clkctrl = 0x4a009420, + .cm_l4per_gptimer10_clkctrl = 0x4a009428, + .cm_l4per_gptimer11_clkctrl = 0x4a009430, + .cm_l4per_gptimer2_clkctrl = 0x4a009438, + .cm_l4per_gptimer3_clkctrl = 0x4a009440, + .cm_l4per_gptimer4_clkctrl = 0x4a009448, + .cm_l4per_gptimer9_clkctrl = 0x4a009450, + .cm_l4per_elm_clkctrl = 0x4a009458, + .cm_l4per_gpio2_clkctrl = 0x4a009460, + .cm_l4per_gpio3_clkctrl = 0x4a009468, + .cm_l4per_gpio4_clkctrl = 0x4a009470, + .cm_l4per_gpio5_clkctrl = 0x4a009478, + .cm_l4per_gpio6_clkctrl = 0x4a009480, + .cm_l4per_hdq1w_clkctrl = 0x4a009488, + .cm_l4per_hecc1_clkctrl = 0x4a009490, + .cm_l4per_hecc2_clkctrl = 0x4a009498, + .cm_l4per_i2c1_clkctrl = 0x4a0094a0, + .cm_l4per_i2c2_clkctrl = 0x4a0094a8, + .cm_l4per_i2c3_clkctrl = 0x4a0094b0, + .cm_l4per_i2c4_clkctrl = 0x4a0094b8, + .cm_l4per_l4per_clkctrl = 0x4a0094c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, + .cm_l4per_mgate_clkctrl = 0x4a0094e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009500, + .cm_l4per_mcspi4_clkctrl = 0x4a009508, + .cm_l4per_gpio7_clkctrl = 0x4a009510, + .cm_l4per_gpio8_clkctrl = 0x4a009518, + .cm_l4per_mmcsd3_clkctrl = 0x4a009520, + .cm_l4per_mmcsd4_clkctrl = 0x4a009528, + .cm_l4per_msprohg_clkctrl = 0x4a009530, + .cm_l4per_slimbus2_clkctrl = 0x4a009538, + .cm_l4per_uart1_clkctrl = 0x4a009540, + .cm_l4per_uart2_clkctrl = 0x4a009548, + .cm_l4per_uart3_clkctrl = 0x4a009550, + .cm_l4per_uart4_clkctrl = 0x4a009558, + .cm_l4per_mmcsd5_clkctrl = 0x4a009560, + .cm_l4per_i2c5_clkctrl = 0x4a009568, + .cm_l4per_uart5_clkctrl = 0x4a009570, + .cm_l4per_uart6_clkctrl = 0x4a009578, + .cm_l4sec_clkstctrl = 0x4a009580, + .cm_l4sec_staticdep = 0x4a009584, + .cm_l4sec_dynamicdep = 0x4a009588, + .cm_l4sec_aes1_clkctrl = 0x4a0095a0, + .cm_l4sec_aes2_clkctrl = 0x4a0095a8, + .cm_l4sec_des3des_clkctrl = 0x4a0095b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, + .cm_l4sec_rng_clkctrl = 0x4a0095c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07800, + .cm_wkup_l4wkup_clkctrl = 0x4ae07820, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, + .cm_wkup_gpio1_clkctrl = 0x4ae07838, + .cm_wkup_gptimer1_clkctrl = 0x4ae07840, + .cm_wkup_gptimer12_clkctrl = 0x4ae07848, + .cm_wkup_synctimer_clkctrl = 0x4ae07850, + .cm_wkup_usim_clkctrl = 0x4ae07858, + .cm_wkup_sarram_clkctrl = 0x4ae07860, + .cm_wkup_keyboard_clkctrl = 0x4ae07878, + .cm_wkup_rtc_clkctrl = 0x4ae07880, + .cm_wkup_bandgap_clkctrl = 0x4ae07888, + .cm_wkupaon_scrm_clkctrl = 0x4ae07890, + .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898, + .prm_rstctrl = 0x4ae07b00, + .prm_rstst = 0x4ae07b04, + .prm_vc_val_bypass = 0x4ae07ba0, + .prm_vc_cfg_i2c_mode = 0x4ae07bb4, + .prm_vc_cfg_i2c_clk = 0x4ae07bb8, + .prm_sldo_core_setup = 0x4ae07bc4, + .prm_sldo_core_ctrl = 0x4ae07bc8, + .prm_sldo_mpu_setup = 0x4ae07bcc, + .prm_sldo_mpu_ctrl = 0x4ae07bd0, + .prm_sldo_mm_setup = 0x4ae07bd4, + .prm_sldo_mm_ctrl = 0x4ae07bd8, +}; + +struct omap_sys_ctrl_regs const omap5_ctrl = { + .control_status = 0x4A002134, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_smart1nopmio_padconf_0 = 0x4AE0CDA0, + .control_smart1nopmio_padconf_1 = 0x4AE0CDA4, + .control_padconf_mode = 0x4AE0CDA8, + .control_xtal_oscillator = 0x4AE0CDAC, + .control_i2c_2 = 0x4AE0CDB0, + .control_ckobuffer = 0x4AE0CDB4, + .control_wkup_control_spare_rw = 0x4AE0CDB8, + .control_wkup_control_spare_r = 0x4AE0CDBC, + .control_wkup_control_spare_r_c0 = 0x4AE0CDC0, + .control_srcomp_east_side_wkup = 0x4AE0CDC4, + .control_efuse_1 = 0x4AE0CDC8, + .control_efuse_2 = 0x4AE0CDCC, + .control_efuse_3 = 0x4AE0CDD0, + .control_efuse_4 = 0x4AE0CDD4, + .control_efuse_5 = 0x4AE0CDD8, + .control_efuse_6 = 0x4AE0CDDC, + .control_efuse_7 = 0x4AE0CDE0, + .control_efuse_8 = 0x4AE0CDE4, + .control_efuse_9 = 0x4AE0CDE8, + .control_efuse_10 = 0x4AE0CDEC, + .control_efuse_11 = 0x4AE0CDF0, + .control_efuse_12 = 0x4AE0CDF4, + .control_efuse_13 = 0x4AE0CDF8, +}; + +struct omap_sys_ctrl_regs const dra7xx_ctrl = { + .control_status = 0x4A002134, + .control_core_mmr_lock1 = 0x4A002540, + .control_core_mmr_lock2 = 0x4A002544, + .control_core_mmr_lock3 = 0x4A002548, + .control_core_mmr_lock4 = 0x4A00254C, + .control_core_mmr_lock5 = 0x4A002550, + .control_core_control_io1 = 0x4A002554, + .control_core_control_io2 = 0x4A002558, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_padconf_core_base = 0x4A003400, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_padconf_mode = 0x4AE0C5A0, + .control_xtal_oscillator = 0x4AE0C5A4, + .control_i2c_2 = 0x4AE0C5A8, + .control_ckobuffer = 0x4AE0C5AC, + .control_wkup_control_spare_rw = 0x4AE0C5B0, + .control_wkup_control_spare_r = 0x4AE0C5B4, + .control_wkup_control_spare_r_c0 = 0x4AE0C5B8, + .control_srcomp_east_side_wkup = 0x4AE0C5BC, + .control_efuse_1 = 0x4AE0C5C0, + .control_efuse_2 = 0x4AE0C5C4, + .control_efuse_3 = 0x4AE0C5C8, + .control_efuse_4 = 0x4AE0C5CC, + .control_efuse_13 = 0x4AE0C5F0, +}; + +struct prcm_regs const omap5_es2_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_h11_dpll_core = 0x4a004138, + .cm_div_h12_dpll_core = 0x4a00413c, + .cm_div_h13_dpll_core = 0x4a004140, + .cm_div_h14_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_div_h21_dpll_core = 0x4a004150, + .cm_div_h22_dpllcore = 0x4a004154, + .cm_div_h23_dpll_core = 0x4a004158, + .cm_div_h24_dpll_core = 0x4a00415c, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_h11_dpll_iva = 0x4a0041b8, + .cm_div_h12_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_h11_dpll_ddrphy = 0x4a004238, + .cm_div_h12_dpll_ddrphy = 0x4a00423c, + .cm_div_h13_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h13_dpll_per = 0x4a008160, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + .cm_coreaon_bandgap_clkctrl = 0x4a008648, + .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + .cm_l4per_clkstctrl = 0x4a009000, + .cm_l4per_dynamicdep = 0x4a009008, + .cm_l4per_adc_clkctrl = 0x4a009020, + .cm_l4per_gptimer10_clkctrl = 0x4a009028, + .cm_l4per_gptimer11_clkctrl = 0x4a009030, + .cm_l4per_gptimer2_clkctrl = 0x4a009038, + .cm_l4per_gptimer3_clkctrl = 0x4a009040, + .cm_l4per_gptimer4_clkctrl = 0x4a009048, + .cm_l4per_gptimer9_clkctrl = 0x4a009050, + .cm_l4per_elm_clkctrl = 0x4a009058, + .cm_l4per_gpio2_clkctrl = 0x4a009060, + .cm_l4per_gpio3_clkctrl = 0x4a009068, + .cm_l4per_gpio4_clkctrl = 0x4a009070, + .cm_l4per_gpio5_clkctrl = 0x4a009078, + .cm_l4per_gpio6_clkctrl = 0x4a009080, + .cm_l4per_hdq1w_clkctrl = 0x4a009088, + .cm_l4per_hecc1_clkctrl = 0x4a009090, + .cm_l4per_hecc2_clkctrl = 0x4a009098, + .cm_l4per_i2c1_clkctrl = 0x4a0090a0, + .cm_l4per_i2c2_clkctrl = 0x4a0090a8, + .cm_l4per_i2c3_clkctrl = 0x4a0090b0, + .cm_l4per_i2c4_clkctrl = 0x4a0090b8, + .cm_l4per_l4per_clkctrl = 0x4a0090c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0090d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0090d8, + .cm_l4per_mgate_clkctrl = 0x4a0090e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0090f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0090f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009100, + .cm_l4per_mcspi4_clkctrl = 0x4a009108, + .cm_l4per_gpio7_clkctrl = 0x4a009110, + .cm_l4per_gpio8_clkctrl = 0x4a009118, + .cm_l4per_mmcsd3_clkctrl = 0x4a009120, + .cm_l4per_mmcsd4_clkctrl = 0x4a009128, + .cm_l4per_msprohg_clkctrl = 0x4a009130, + .cm_l4per_slimbus2_clkctrl = 0x4a009138, + .cm_l4per_uart1_clkctrl = 0x4a009140, + .cm_l4per_uart2_clkctrl = 0x4a009148, + .cm_l4per_uart3_clkctrl = 0x4a009150, + .cm_l4per_uart4_clkctrl = 0x4a009158, + .cm_l4per_mmcsd5_clkctrl = 0x4a009160, + .cm_l4per_i2c5_clkctrl = 0x4a009168, + .cm_l4per_uart5_clkctrl = 0x4a009170, + .cm_l4per_uart6_clkctrl = 0x4a009178, + .cm_l4sec_clkstctrl = 0x4a009180, + .cm_l4sec_staticdep = 0x4a009184, + .cm_l4sec_dynamicdep = 0x4a009188, + .cm_l4sec_aes1_clkctrl = 0x4a0091a0, + .cm_l4sec_aes2_clkctrl = 0x4a0091a8, + .cm_l4sec_des3des_clkctrl = 0x4a0091b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0091b8, + .cm_l4sec_rng_clkctrl = 0x4a0091c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0091c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0091d8, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a009200, + .cm_ivahd_ivahd_clkctrl = 0x4a009220, + .cm_ivahd_sl2_clkctrl = 0x4a009228, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009300, + .cm_cam_iss_clkctrl = 0x4a009320, + .cm_cam_fdif_clkctrl = 0x4a009328, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009400, + .cm_dss_dss_clkctrl = 0x4a009420, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009500, + .cm_sgx_sgx_clkctrl = 0x4a009520, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009600, + + /* cm2.l3init */ + .cm_l3init_hsmmc1_clkctrl = 0x4a009628, + .cm_l3init_hsmmc2_clkctrl = 0x4a009630, + .cm_l3init_hsi_clkctrl = 0x4a009638, + .cm_l3init_hsusbhost_clkctrl = 0x4a009658, + .cm_l3init_hsusbotg_clkctrl = 0x4a009660, + .cm_l3init_hsusbtll_clkctrl = 0x4a009668, + .cm_l3init_p1500_clkctrl = 0x4a009678, + .cm_l3init_fsusb_clkctrl = 0x4a0096d0, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07900, + .cm_wkup_l4wkup_clkctrl = 0x4ae07920, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07928, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07930, + .cm_wkup_gpio1_clkctrl = 0x4ae07938, + .cm_wkup_gptimer1_clkctrl = 0x4ae07940, + .cm_wkup_gptimer12_clkctrl = 0x4ae07948, + .cm_wkup_synctimer_clkctrl = 0x4ae07950, + .cm_wkup_usim_clkctrl = 0x4ae07958, + .cm_wkup_sarram_clkctrl = 0x4ae07960, + .cm_wkup_keyboard_clkctrl = 0x4ae07978, + .cm_wkup_rtc_clkctrl = 0x4ae07980, + .cm_wkup_bandgap_clkctrl = 0x4ae07988, + .cm_wkupaon_scrm_clkctrl = 0x4ae07990, + .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998, + .prm_rstctrl = 0x4ae07c00, + .prm_rstst = 0x4ae07c04, + .prm_vc_val_bypass = 0x4ae07ca0, + .prm_vc_cfg_i2c_mode = 0x4ae07cb4, + .prm_vc_cfg_i2c_clk = 0x4ae07cb8, + + .prm_sldo_core_setup = 0x4ae07cc4, + .prm_sldo_core_ctrl = 0x4ae07cc8, + .prm_sldo_mpu_setup = 0x4ae07ccc, + .prm_sldo_mpu_ctrl = 0x4ae07cd0, + .prm_sldo_mm_setup = 0x4ae07cd4, + .prm_sldo_mm_ctrl = 0x4ae07cd8, +}; + +struct prcm_regs const dra7xx_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a005100, + .cm_clksel_abe = 0x4a005108, + .cm_dll_ctrl = 0x4a005110, + .cm_clkmode_dpll_core = 0x4a005120, + .cm_idlest_dpll_core = 0x4a005124, + .cm_autoidle_dpll_core = 0x4a005128, + .cm_clksel_dpll_core = 0x4a00512c, + .cm_div_m2_dpll_core = 0x4a005130, + .cm_div_m3_dpll_core = 0x4a005134, + .cm_div_h11_dpll_core = 0x4a005138, + .cm_div_h12_dpll_core = 0x4a00513c, + .cm_div_h13_dpll_core = 0x4a005140, + .cm_div_h14_dpll_core = 0x4a005144, + .cm_ssc_deltamstep_dpll_core = 0x4a005148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00514c, + .cm_div_h21_dpll_core = 0x4a005150, + .cm_div_h22_dpllcore = 0x4a005154, + .cm_div_h23_dpll_core = 0x4a005158, + .cm_div_h24_dpll_core = 0x4a00515c, + .cm_clkmode_dpll_mpu = 0x4a005160, + .cm_idlest_dpll_mpu = 0x4a005164, + .cm_autoidle_dpll_mpu = 0x4a005168, + .cm_clksel_dpll_mpu = 0x4a00516c, + .cm_div_m2_dpll_mpu = 0x4a005170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a005188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00518c, + .cm_bypclk_dpll_mpu = 0x4a00519c, + .cm_clkmode_dpll_iva = 0x4a0051a0, + .cm_idlest_dpll_iva = 0x4a0051a4, + .cm_autoidle_dpll_iva = 0x4a0051a8, + .cm_clksel_dpll_iva = 0x4a0051ac, + .cm_ssc_deltamstep_dpll_iva = 0x4a0051c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0051cc, + .cm_bypclk_dpll_iva = 0x4a0051dc, + .cm_clkmode_dpll_abe = 0x4a0051e0, + .cm_idlest_dpll_abe = 0x4a0051e4, + .cm_autoidle_dpll_abe = 0x4a0051e8, + .cm_clksel_dpll_abe = 0x4a0051ec, + .cm_div_m2_dpll_abe = 0x4a0051f0, + .cm_div_m3_dpll_abe = 0x4a0051f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a005208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00520c, + .cm_clkmode_dpll_ddrphy = 0x4a005210, + .cm_idlest_dpll_ddrphy = 0x4a005214, + .cm_autoidle_dpll_ddrphy = 0x4a005218, + .cm_clksel_dpll_ddrphy = 0x4a00521c, + .cm_div_m2_dpll_ddrphy = 0x4a005220, + .cm_div_h11_dpll_ddrphy = 0x4a005228, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a00522c, + .cm_clkmode_dpll_dsp = 0x4a005234, + .cm_shadow_freq_config1 = 0x4a005260, + + /* cm1.mpu */ + .cm_mpu_mpu_clkctrl = 0x4a005320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a005400, + .cm_dsp_dsp_clkctrl = 0x4a005420, + + /* cm2.ckgen */ + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h13_dpll_per = 0x4a008160, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_pcie_ref = 0x4a008200, + .cm_clkmode_apll_pcie = 0x4a00821c, + .cm_idlest_apll_pcie = 0x4a008220, + .cm_div_m2_apll_pcie = 0x4a008224, + .cm_clkvcoldo_apll_pcie = 0x4a008228, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_gpmc_clkctrl = 0x4a008728, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a008f00, + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_vip1_clkctrl = 0x4a009020, + .cm_cam_vip2_clkctrl = 0x4a009028, + .cm_cam_vip3_clkctrl = 0x4a009030, + .cm_cam_lvdsrx_clkctrl = 0x4a009038, + .cm_cam_csi1_clkctrl = 0x4a009040, + .cm_cam_csi2_clkctrl = 0x4a009048, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + + /* cm2.l3init */ + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsusbhost_clkctrl = 0x4a009340, + .cm_l3init_hsusbotg_clkctrl = 0x4a009348, + .cm_l3init_hsusbtll_clkctrl = 0x4a009350, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009700, + .cm_l4per_dynamicdep = 0x4a009708, + .cm_l4per_gptimer10_clkctrl = 0x4a009728, + .cm_l4per_gptimer11_clkctrl = 0x4a009730, + .cm_l4per_gptimer2_clkctrl = 0x4a009738, + .cm_l4per_gptimer3_clkctrl = 0x4a009740, + .cm_l4per_gptimer4_clkctrl = 0x4a009748, + .cm_l4per_gptimer9_clkctrl = 0x4a009750, + .cm_l4per_elm_clkctrl = 0x4a009758, + .cm_l4per_gpio2_clkctrl = 0x4a009760, + .cm_l4per_gpio3_clkctrl = 0x4a009768, + .cm_l4per_gpio4_clkctrl = 0x4a009770, + .cm_l4per_gpio5_clkctrl = 0x4a009778, + .cm_l4per_gpio6_clkctrl = 0x4a009780, + .cm_l4per_hdq1w_clkctrl = 0x4a009788, + .cm_l4per_i2c1_clkctrl = 0x4a0097a0, + .cm_l4per_i2c2_clkctrl = 0x4a0097a8, + .cm_l4per_i2c3_clkctrl = 0x4a0097b0, + .cm_l4per_i2c4_clkctrl = 0x4a0097b8, + .cm_l4per_l4per_clkctrl = 0x4a0097c0, + .cm_l4per_mcspi1_clkctrl = 0x4a0097f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0097f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009800, + .cm_l4per_mcspi4_clkctrl = 0x4a009808, + .cm_l4per_gpio7_clkctrl = 0x4a009810, + .cm_l4per_gpio8_clkctrl = 0x4a009818, + .cm_l4per_mmcsd3_clkctrl = 0x4a009820, + .cm_l4per_mmcsd4_clkctrl = 0x4a009828, + .cm_l4per_uart1_clkctrl = 0x4a009840, + .cm_l4per_uart2_clkctrl = 0x4a009848, + .cm_l4per_uart3_clkctrl = 0x4a009850, + .cm_l4per_uart4_clkctrl = 0x4a009858, + .cm_l4per_uart5_clkctrl = 0x4a009870, + .cm_l4sec_clkstctrl = 0x4a009880, + .cm_l4sec_staticdep = 0x4a009884, + .cm_l4sec_dynamicdep = 0x4a009888, + .cm_l4sec_aes1_clkctrl = 0x4a0098a0, + .cm_l4sec_aes2_clkctrl = 0x4a0098a8, + .cm_l4sec_des3des_clkctrl = 0x4a0098b0, + .cm_l4sec_rng_clkctrl = 0x4a0098c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0098c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0098d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07800, + .cm_wkup_l4wkup_clkctrl = 0x4ae07820, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, + .cm_wkup_gpio1_clkctrl = 0x4ae07838, + .cm_wkup_gptimer1_clkctrl = 0x4ae07840, + .cm_wkup_gptimer12_clkctrl = 0x4ae07848, + .cm_wkup_sarram_clkctrl = 0x4ae07860, + .cm_wkup_keyboard_clkctrl = 0x4ae07878, + .cm_wkupaon_scrm_clkctrl = 0x4ae07890, + .prm_rstctrl = 0x4ae07d00, + .prm_rstst = 0x4ae07d04, + .prm_vc_val_bypass = 0x4ae07da0, + .prm_vc_cfg_i2c_mode = 0x4ae07db4, + .prm_vc_cfg_i2c_clk = 0x4ae07db8, +}; diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 6ebdf5f..6b461e4 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -67,6 +67,25 @@ const struct emif_regs emif_regs_532_mhz_2cs = { .emif_ddr_ext_phy_ctrl_5 = 0x04010040 }; +const struct emif_regs emif_regs_532_mhz_2cs_es2 = { + .sdram_config_init = 0x80800EBA, + .sdram_config = 0x808022BA, + .ref_ctrl = 0x0000081A, + .sdram_tim1 = 0x772F6873, + .sdram_tim2 = 0x304a129a, + .sdram_tim3 = 0x02f7e45f, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x100b3215, + .temp_alert_config = 0x08000a05, + .emif_ddr_phy_ctlr_1_init = 0x0E30400d, + .emif_ddr_phy_ctlr_1 = 0x0E30400d, + .emif_ddr_ext_phy_ctrl_1 = 0x04020080, + .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3, + .emif_ddr_ext_phy_ctrl_3 = 0x518A3146, + .emif_ddr_ext_phy_ctrl_4 = 0x0014628C, + .emif_ddr_ext_phy_ctrl_5 = 0xC330CC33, +}; + const struct emif_regs emif_regs_266_mhz_2cs = { .sdram_config_init = 0x80800EBA, .sdram_config = 0x808022BA, @@ -109,13 +128,111 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { .emif_rd_wr_exec_thresh = 0x00000305 }; +const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { + .sdram_config_init = 0x61851B32, + .sdram_config = 0x61851B32, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x1007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0030400A, + .emif_ddr_phy_ctlr_1 = 0x0034400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00000000, + .emif_ddr_ext_phy_ctrl_3 = 0x00000000, + .emif_ddr_ext_phy_ctrl_4 = 0x00000000, + .emif_ddr_ext_phy_ctrl_5 = 0x4350D435, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x40000305 +}; + const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { .dmm_lisa_map_0 = 0x0, .dmm_lisa_map_1 = 0x0, .dmm_lisa_map_2 = 0x80740300, - .dmm_lisa_map_3 = 0xFF020100 + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +const struct dmm_lisa_map_regs lisa_map_512M_x_1 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x0, + .dmm_lisa_map_2 = 0x0, + .dmm_lisa_map_3 = 0x80500100, + .is_ma_present = 0x1 +}; + +static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + *regs = &emif_regs_532_mhz_2cs; + break; + case OMAP5432_ES1_0: + *regs = &emif_regs_ddr3_532_mhz_1cs; + break; + case OMAP5430_ES2_0: + *regs = &emif_regs_532_mhz_2cs_es2; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + default: + *regs = &emif_regs_ddr3_532_mhz_1cs_es2; + } +} + +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) + __attribute__((weak, alias("emif_get_reg_dump_sdp"))); + +static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs + **dmm_lisa_regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + case OMAP5432_ES1_0: + case OMAP5432_ES2_0: + *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; + break; + case DRA752_ES1_0: + default: + *dmm_lisa_regs = &lisa_map_512M_x_1; + } + +} + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) + __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); +#else + +static const struct lpddr2_device_details dev_4G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_4Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG }; +static void emif_get_device_details_sdp(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) +{ + /* EMIF1 & EMIF2 have identical configuration */ + *cs0_device_details = dev_4G_S4_details; + *cs1_device_details = dev_4G_S4_details; +} + +void emif_get_device_details(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) + __attribute__((weak, alias("emif_get_device_details_sdp"))); + +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x01004010, 0x00001004, @@ -138,7 +255,7 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000077 }; -const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { +const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x01004010, 0x00001004, 0x04010040, @@ -160,54 +277,64 @@ const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000057 }; -static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) -{ - if (omap_revision() == OMAP5432_ES1_0) - *regs = &emif_regs_ddr3_532_mhz_1cs; - else - *regs = &emif_regs_532_mhz_2cs; -} -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) - __attribute__((weak, alias("emif_get_reg_dump_sdp"))); - -static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs - **dmm_lisa_regs) -{ - *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; -} - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) - __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); - -#else +const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x50D4350D, + 0x00000D43, + 0x04010040, + 0x01004010, + 0x00001004, + 0x00000000, + 0x00000000, + 0x00000000, + 0x80080080, + 0x00800800, + 0x08102040, + 0x00000002, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000057 +}; -static const struct lpddr2_device_details dev_4G_S4_details = { - .type = LPDDR2_TYPE_S4, - .density = LPDDR2_DENSITY_4Gb, - .io_width = LPDDR2_IO_WIDTH_32, - .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG +const struct lpddr2_mr_regs mr_regs = { + .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8, + .mr2 = 0x6, + .mr3 = 0x1, + .mr10 = MR10_ZQ_ZQINIT, + .mr16 = MR16_REF_FULL_ARRAY }; -static void emif_get_device_details_sdp(u32 emif_nr, - struct lpddr2_device_details *cs0_device_details, - struct lpddr2_device_details *cs1_device_details) +static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs) { - /* EMIF1 & EMIF2 have identical configuration */ - *cs0_device_details = dev_4G_S4_details; - *cs1_device_details = dev_4G_S4_details; -} + switch (omap_revision()) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + *regs = ext_phy_ctrl_const_base; + break; + case OMAP5432_ES1_0: + *regs = ddr3_ext_phy_ctrl_const_base_es1; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + default: + *regs = ddr3_ext_phy_ctrl_const_base_es2; -void emif_get_device_details(u32 emif_nr, - struct lpddr2_device_details *cs0_device_details, - struct lpddr2_device_details *cs1_device_details) - __attribute__((weak, alias("emif_get_device_details_sdp"))); + } +} -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) +{ + *regs = &mr_regs; +} void do_ext_phy_settings(u32 base, const struct emif_regs *regs) { u32 *ext_phy_ctrl_base = 0; u32 *emif_ext_phy_ctrl_base = 0; + const u32 *ext_phy_ctrl_const_regs; u32 i = 0; struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -226,12 +353,13 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) * external phy 6-24 registers do not change with * ddr frequency */ + emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs); for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { - writel(ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); + writel(ext_phy_ctrl_const_regs[i], + emif_ext_phy_ctrl_base++); /* Update shadow registers */ - writel(ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); + writel(ext_phy_ctrl_const_regs[i], + emif_ext_phy_ctrl_base++); } } diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile index 499ace4..388085d 100644 --- a/arch/arm/cpu/armv7/zynq/Makefile +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -30,6 +30,7 @@ LIB = $(obj)lib$(SOC).o COBJS-y := timer.o COBJS-y += cpu.o +COBJS-y += slcr.o COBJS := $(COBJS-y) diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c index ab615cc..e8f4c19 100644 --- a/arch/arm/cpu/armv7/zynq/cpu.c +++ b/arch/arm/cpu/armv7/zynq/cpu.c @@ -21,11 +21,37 @@ * MA 02111-1307 USA */ #include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> -inline void lowlevel_init(void) {} +void lowlevel_init(void) +{ + zynq_slcr_unlock(); + /* remap DDR to zero, FILTERSTART */ + writel(0, &scu_base->filter_start); + + /* Device config APB, unlock the PCAP */ + writel(0x757BDF0D, &devcfg_base->unlock); + writel(0xFFFFFFFF, &devcfg_base->rom_shadow); + + /* OCM_CFG, Mask out the ROM, map ram into upper addresses */ + writel(0x1F, &slcr_base->ocm_cfg); + /* FPGA_RST_CTRL, clear resets on AXI fabric ports */ + writel(0x0, &slcr_base->fpga_rst_ctrl); + /* TZ_DDR_RAM, Set DDR trust zone non-secure */ + writel(0xFFFFFFFF, &slcr_base->trust_zone); + /* Set urgent bits with register */ + writel(0x0, &slcr_base->ddr_urgent_sel); + /* Urgent write, ports S2/S3 */ + writel(0xC, &slcr_base->ddr_urgent); + + zynq_slcr_lock(); +} void reset_cpu(ulong addr) { + zynq_slcr_cpu_reset(); while (1) ; } diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c new file mode 100644 index 0000000..788a8fd --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <malloc.h> +#include <asm/arch/hardware.h> + +#define SLCR_LOCK_MAGIC 0x767B +#define SLCR_UNLOCK_MAGIC 0xDF0D + +static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */ + +void zynq_slcr_lock(void) +{ + if (!slcr_lock) + writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock); +} + +void zynq_slcr_unlock(void) +{ + if (slcr_lock) + writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock); +} + +/* Reset the entire system */ +void zynq_slcr_cpu_reset(void) +{ + /* + * Unlock the SLCR then reset the system. + * Note that this seems to require raw i/o + * functions or there's a lockup? + */ + zynq_slcr_unlock(); + + /* + * Clear 0x0F000000 bits of reboot status register to workaround + * the FSBL not loading the bitstream after soft-reboot + * This is a temporary solution until we know more. + */ + clrbits_le32(&slcr_base->reboot_status, 0xF000000); + + writel(1, &slcr_base->pss_rst_ctrl); +} diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index 1f597c0..33c9c83 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -16,148 +16,12 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ #define OMAP_HSMMC1_BASE 0x48060100 #define OMAP_HSMMC2_BASE 0x481D8100 -typedef struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -} hsmmc_t; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 644ff35..e961ce0 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -29,6 +29,7 @@ #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ #define BOOT_DEVICE_SPI 11 #define BOOT_DEVICE_UART 65 +#define BOOT_DEVICE_USBETH 68 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF #endif diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 588d8de..97ab60d 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -35,5 +35,7 @@ void ddr_pll_config(unsigned int ddrpll_M); void sdelay(unsigned long); void gpmc_init(void); +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size); void omap_nand_switch_ecc(int); #endif diff --git a/arch/arm/include/asm/arch-davinci/gpio.h b/arch/arm/include/asm/arch-davinci/gpio.h index 5206b12..06390c8 100644 --- a/arch/arm/include/asm/arch-davinci/gpio.h +++ b/arch/arm/include/asm/arch-davinci/gpio.h @@ -65,15 +65,16 @@ struct davinci_gpio_bank { #define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67) #define davinci_gpio_bank8 ((struct davinci_gpio *)DAVINCI_GPIO_BANK8) +#define gpio_status() gpio_info() +#define GPIO_NAME_SIZE 20 #if defined(CONFIG_SOC_DM644X) /* GPIO0 to GPIO53, omit the V3.3 volts one */ #define MAX_NUM_GPIOS 70 +#elif defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850) +#define MAX_NUM_GPIOS 128 #else #define MAX_NUM_GPIOS 144 #endif - -#define gpio_status() gpio_info() -#define GPIO_NAME_SIZE 20 #define GPIO_BANK(gp) (davinci_gpio_bank01 + ((gp) >> 5)) #define GPIO_BIT(gp) ((gp) & 0x1F) diff --git a/arch/arm/include/asm/arch-mx35/spl.h b/arch/arm/include/asm/arch-mx35/spl.h index 91d11ae..3ca4c94 100644 --- a/arch/arm/include/asm/arch-mx35/spl.h +++ b/arch/arm/include/asm/arch-mx35/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h index ffaffbb..ae0babf 100644 --- a/arch/arm/include/asm/arch-omap3/dss.h +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -167,6 +167,36 @@ struct venc_regs { #define VENC_OUT_SEL (1 << 6) #define DIG_LPP_SHIFT 16 +/* LCD display type */ +#define PASSIVE_DISPLAY 0 +#define ACTIVE_DISPLAY 1 + +/* TFTDATALINES */ +#define LCD_INTERFACE_12_BIT 0 +#define LCD_INTERFACE_16_BIT 1 +#define LCD_INTERFACE_18_BIT 2 +#define LCD_INTERFACE_24_BIT 3 + +/* Polarity */ +#define DSS_IVS (1 << 12) +#define DSS_IHS (1 << 13) +#define DSS_IPC (1 << 14) +#define DSS_IEO (1 << 15) + +/* GFX format */ +#define GFXFORMAT_BITMAP1 (0x0 << 1) +#define GFXFORMAT_BITMAP2 (0x1 << 1) +#define GFXFORMAT_BITMAP4 (0x2 << 1) +#define GFXFORMAT_BITMAP8 (0x3 << 1) +#define GFXFORMAT_RGB12 (0x4 << 1) +#define GFXFORMAT_ARGB16 (0x5 << 1) +#define GFXFORMAT_RGB16 (0x6 << 1) +#define GFXFORMAT_RGB24_UNPACKED (0x8 << 1) +#define GFXFORMAT_RGB24_PACKED (0x9 << 1) +#define GFXFORMAT_ARGB32 (0xC << 1) +#define GFXFORMAT_RGBA32 (0xD << 1) +#define GFXFORMAT_RGBx32 (0xE << 1) + /* Panel Configuration */ struct panel_config { u32 timing_h; @@ -178,6 +208,7 @@ struct panel_config { u32 data_lines; u32 load_mode; u32 panel_color; + u32 gfx_format; void *frame_buffer; }; diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h index 3ce1f07..0ba621a 100644 --- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* T2 Register definitions */ #define T2_BASE 0x48002000 @@ -59,142 +61,5 @@ typedef struct t2 { #define OMAP_HSMMC2_BASE 0x480B4000 #define OMAP_HSMMC3_BASE 0x480AD000 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h index 404e16a..dec4dac 100644 --- a/arch/arm/include/asm/arch-omap3/spl.h +++ b/arch/arm/include/asm/arch-omap3/spl.h @@ -26,7 +26,7 @@ #define BOOT_DEVICE_NONE 0 #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_NAND 2 -#define BOOT_DEVICE_ONE_NAND 3 +#define BOOT_DEVICE_ONENAND 3 #define BOOT_DEVICE_MMC2 5 /*emmc*/ #define BOOT_DEVICE_MMC1 6 #define BOOT_DEVICE_XIPWAIT 7 diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h index be20fc0..ed7a1c8 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clocks.h @@ -25,6 +25,7 @@ #ifndef _CLOCKS_OMAP4_H_ #define _CLOCKS_OMAP4_H_ #include <common.h> +#include <asm/omap_common.h> /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per @@ -38,479 +39,6 @@ #define CM_CLKMODE_DPLL_MPU 0x4A004160 #define CM_CLKSEL_CORE 0x4A004100 -struct omap4_prcm_regs { - /* cm1.ckgen */ - u32 cm_clksel_core; - u32 pad001[1]; - u32 cm_clksel_abe; - u32 pad002[1]; - u32 cm_dll_ctrl; - u32 pad003[3]; - u32 cm_clkmode_dpll_core; - u32 cm_idlest_dpll_core; - u32 cm_autoidle_dpll_core; - u32 cm_clksel_dpll_core; - u32 cm_div_m2_dpll_core; - u32 cm_div_m3_dpll_core; - u32 cm_div_m4_dpll_core; - u32 cm_div_m5_dpll_core; - u32 cm_div_m6_dpll_core; - u32 cm_div_m7_dpll_core; - u32 cm_ssc_deltamstep_dpll_core; - u32 cm_ssc_modfreqdiv_dpll_core; - u32 cm_emu_override_dpll_core; - u32 pad004[3]; - u32 cm_clkmode_dpll_mpu; - u32 cm_idlest_dpll_mpu; - u32 cm_autoidle_dpll_mpu; - u32 cm_clksel_dpll_mpu; - u32 cm_div_m2_dpll_mpu; - u32 pad005[5]; - u32 cm_ssc_deltamstep_dpll_mpu; - u32 cm_ssc_modfreqdiv_dpll_mpu; - u32 pad006[3]; - u32 cm_bypclk_dpll_mpu; - u32 cm_clkmode_dpll_iva; - u32 cm_idlest_dpll_iva; - u32 cm_autoidle_dpll_iva; - u32 cm_clksel_dpll_iva; - u32 pad007[2]; - u32 cm_div_m4_dpll_iva; - u32 cm_div_m5_dpll_iva; - u32 pad008[2]; - u32 cm_ssc_deltamstep_dpll_iva; - u32 cm_ssc_modfreqdiv_dpll_iva; - u32 pad009[3]; - u32 cm_bypclk_dpll_iva; - u32 cm_clkmode_dpll_abe; - u32 cm_idlest_dpll_abe; - u32 cm_autoidle_dpll_abe; - u32 cm_clksel_dpll_abe; - u32 cm_div_m2_dpll_abe; - u32 cm_div_m3_dpll_abe; - u32 pad010[4]; - u32 cm_ssc_deltamstep_dpll_abe; - u32 cm_ssc_modfreqdiv_dpll_abe; - u32 pad011[4]; - u32 cm_clkmode_dpll_ddrphy; - u32 cm_idlest_dpll_ddrphy; - u32 cm_autoidle_dpll_ddrphy; - u32 cm_clksel_dpll_ddrphy; - u32 cm_div_m2_dpll_ddrphy; - u32 pad012[1]; - u32 cm_div_m4_dpll_ddrphy; - u32 cm_div_m5_dpll_ddrphy; - u32 cm_div_m6_dpll_ddrphy; - u32 pad013[1]; - u32 cm_ssc_deltamstep_dpll_ddrphy; - u32 pad014[5]; - u32 cm_shadow_freq_config1; - u32 pad0141[47]; - u32 cm_mpu_mpu_clkctrl; - - /* cm1.dsp */ - u32 pad015[55]; - u32 cm_dsp_clkstctrl; - u32 pad016[7]; - u32 cm_dsp_dsp_clkctrl; - - /* cm1.abe */ - u32 pad017[55]; - u32 cm1_abe_clkstctrl; - u32 pad018[7]; - u32 cm1_abe_l4abe_clkctrl; - u32 pad019[1]; - u32 cm1_abe_aess_clkctrl; - u32 pad020[1]; - u32 cm1_abe_pdm_clkctrl; - u32 pad021[1]; - u32 cm1_abe_dmic_clkctrl; - u32 pad022[1]; - u32 cm1_abe_mcasp_clkctrl; - u32 pad023[1]; - u32 cm1_abe_mcbsp1_clkctrl; - u32 pad024[1]; - u32 cm1_abe_mcbsp2_clkctrl; - u32 pad025[1]; - u32 cm1_abe_mcbsp3_clkctrl; - u32 pad026[1]; - u32 cm1_abe_slimbus_clkctrl; - u32 pad027[1]; - u32 cm1_abe_timer5_clkctrl; - u32 pad028[1]; - u32 cm1_abe_timer6_clkctrl; - u32 pad029[1]; - u32 cm1_abe_timer7_clkctrl; - u32 pad030[1]; - u32 cm1_abe_timer8_clkctrl; - u32 pad031[1]; - u32 cm1_abe_wdt3_clkctrl; - - /* cm2.ckgen */ - u32 pad032[3805]; - u32 cm_clksel_mpu_m3_iss_root; - u32 cm_clksel_usb_60mhz; - u32 cm_scale_fclk; - u32 pad033[1]; - u32 cm_core_dvfs_perf1; - u32 cm_core_dvfs_perf2; - u32 cm_core_dvfs_perf3; - u32 cm_core_dvfs_perf4; - u32 pad034[1]; - u32 cm_core_dvfs_current; - u32 cm_iva_dvfs_perf_tesla; - u32 cm_iva_dvfs_perf_ivahd; - u32 cm_iva_dvfs_perf_abe; - u32 pad035[1]; - u32 cm_iva_dvfs_current; - u32 pad036[1]; - u32 cm_clkmode_dpll_per; - u32 cm_idlest_dpll_per; - u32 cm_autoidle_dpll_per; - u32 cm_clksel_dpll_per; - u32 cm_div_m2_dpll_per; - u32 cm_div_m3_dpll_per; - u32 cm_div_m4_dpll_per; - u32 cm_div_m5_dpll_per; - u32 cm_div_m6_dpll_per; - u32 cm_div_m7_dpll_per; - u32 cm_ssc_deltamstep_dpll_per; - u32 cm_ssc_modfreqdiv_dpll_per; - u32 cm_emu_override_dpll_per; - u32 pad037[3]; - u32 cm_clkmode_dpll_usb; - u32 cm_idlest_dpll_usb; - u32 cm_autoidle_dpll_usb; - u32 cm_clksel_dpll_usb; - u32 cm_div_m2_dpll_usb; - u32 pad038[5]; - u32 cm_ssc_deltamstep_dpll_usb; - u32 cm_ssc_modfreqdiv_dpll_usb; - u32 pad039[1]; - u32 cm_clkdcoldo_dpll_usb; - u32 pad040[2]; - u32 cm_clkmode_dpll_unipro; - u32 cm_idlest_dpll_unipro; - u32 cm_autoidle_dpll_unipro; - u32 cm_clksel_dpll_unipro; - u32 cm_div_m2_dpll_unipro; - u32 pad041[5]; - u32 cm_ssc_deltamstep_dpll_unipro; - u32 cm_ssc_modfreqdiv_dpll_unipro; - - /* cm2.core */ - u32 pad0411[324]; - u32 cm_l3_1_clkstctrl; - u32 pad042[1]; - u32 cm_l3_1_dynamicdep; - u32 pad043[5]; - u32 cm_l3_1_l3_1_clkctrl; - u32 pad044[55]; - u32 cm_l3_2_clkstctrl; - u32 pad045[1]; - u32 cm_l3_2_dynamicdep; - u32 pad046[5]; - u32 cm_l3_2_l3_2_clkctrl; - u32 pad047[1]; - u32 cm_l3_2_gpmc_clkctrl; - u32 pad048[1]; - u32 cm_l3_2_ocmc_ram_clkctrl; - u32 pad049[51]; - u32 cm_mpu_m3_clkstctrl; - u32 cm_mpu_m3_staticdep; - u32 cm_mpu_m3_dynamicdep; - u32 pad050[5]; - u32 cm_mpu_m3_mpu_m3_clkctrl; - u32 pad051[55]; - u32 cm_sdma_clkstctrl; - u32 cm_sdma_staticdep; - u32 cm_sdma_dynamicdep; - u32 pad052[5]; - u32 cm_sdma_sdma_clkctrl; - u32 pad053[55]; - u32 cm_memif_clkstctrl; - u32 pad054[7]; - u32 cm_memif_dmm_clkctrl; - u32 pad055[1]; - u32 cm_memif_emif_fw_clkctrl; - u32 pad056[1]; - u32 cm_memif_emif_1_clkctrl; - u32 pad057[1]; - u32 cm_memif_emif_2_clkctrl; - u32 pad058[1]; - u32 cm_memif_dll_clkctrl; - u32 pad059[3]; - u32 cm_memif_emif_h1_clkctrl; - u32 pad060[1]; - u32 cm_memif_emif_h2_clkctrl; - u32 pad061[1]; - u32 cm_memif_dll_h_clkctrl; - u32 pad062[39]; - u32 cm_c2c_clkstctrl; - u32 cm_c2c_staticdep; - u32 cm_c2c_dynamicdep; - u32 pad063[5]; - u32 cm_c2c_sad2d_clkctrl; - u32 pad064[1]; - u32 cm_c2c_modem_icr_clkctrl; - u32 pad065[1]; - u32 cm_c2c_sad2d_fw_clkctrl; - u32 pad066[51]; - u32 cm_l4cfg_clkstctrl; - u32 pad067[1]; - u32 cm_l4cfg_dynamicdep; - u32 pad068[5]; - u32 cm_l4cfg_l4_cfg_clkctrl; - u32 pad069[1]; - u32 cm_l4cfg_hw_sem_clkctrl; - u32 pad070[1]; - u32 cm_l4cfg_mailbox_clkctrl; - u32 pad071[1]; - u32 cm_l4cfg_sar_rom_clkctrl; - u32 pad072[49]; - u32 cm_l3instr_clkstctrl; - u32 pad073[7]; - u32 cm_l3instr_l3_3_clkctrl; - u32 pad074[1]; - u32 cm_l3instr_l3_instr_clkctrl; - u32 pad075[5]; - u32 cm_l3instr_intrconn_wp1_clkctrl; - - - /* cm2.ivahd */ - u32 pad076[47]; - u32 cm_ivahd_clkstctrl; - u32 pad077[7]; - u32 cm_ivahd_ivahd_clkctrl; - u32 pad078[1]; - u32 cm_ivahd_sl2_clkctrl; - - /* cm2.cam */ - u32 pad079[53]; - u32 cm_cam_clkstctrl; - u32 pad080[7]; - u32 cm_cam_iss_clkctrl; - u32 pad081[1]; - u32 cm_cam_fdif_clkctrl; - - /* cm2.dss */ - u32 pad082[53]; - u32 cm_dss_clkstctrl; - u32 pad083[7]; - u32 cm_dss_dss_clkctrl; - - /* cm2.sgx */ - u32 pad084[55]; - u32 cm_sgx_clkstctrl; - u32 pad085[7]; - u32 cm_sgx_sgx_clkctrl; - - /* cm2.l3init */ - u32 pad086[55]; - u32 cm_l3init_clkstctrl; - - /* cm2.l3init */ - u32 pad087[9]; - u32 cm_l3init_hsmmc1_clkctrl; - u32 pad088[1]; - u32 cm_l3init_hsmmc2_clkctrl; - u32 pad089[1]; - u32 cm_l3init_hsi_clkctrl; - u32 pad090[7]; - u32 cm_l3init_hsusbhost_clkctrl; - u32 pad091[1]; - u32 cm_l3init_hsusbotg_clkctrl; - u32 pad092[1]; - u32 cm_l3init_hsusbtll_clkctrl; - u32 pad093[3]; - u32 cm_l3init_p1500_clkctrl; - u32 pad094[21]; - u32 cm_l3init_fsusb_clkctrl; - u32 pad095[3]; - u32 cm_l3init_usbphy_clkctrl; - - /* cm2.l4per */ - u32 pad096[7]; - u32 cm_l4per_clkstctrl; - u32 pad097[1]; - u32 cm_l4per_dynamicdep; - u32 pad098[5]; - u32 cm_l4per_adc_clkctrl; - u32 pad100[1]; - u32 cm_l4per_gptimer10_clkctrl; - u32 pad101[1]; - u32 cm_l4per_gptimer11_clkctrl; - u32 pad102[1]; - u32 cm_l4per_gptimer2_clkctrl; - u32 pad103[1]; - u32 cm_l4per_gptimer3_clkctrl; - u32 pad104[1]; - u32 cm_l4per_gptimer4_clkctrl; - u32 pad105[1]; - u32 cm_l4per_gptimer9_clkctrl; - u32 pad106[1]; - u32 cm_l4per_elm_clkctrl; - u32 pad107[1]; - u32 cm_l4per_gpio2_clkctrl; - u32 pad108[1]; - u32 cm_l4per_gpio3_clkctrl; - u32 pad109[1]; - u32 cm_l4per_gpio4_clkctrl; - u32 pad110[1]; - u32 cm_l4per_gpio5_clkctrl; - u32 pad111[1]; - u32 cm_l4per_gpio6_clkctrl; - u32 pad112[1]; - u32 cm_l4per_hdq1w_clkctrl; - u32 pad113[1]; - u32 cm_l4per_hecc1_clkctrl; - u32 pad114[1]; - u32 cm_l4per_hecc2_clkctrl; - u32 pad115[1]; - u32 cm_l4per_i2c1_clkctrl; - u32 pad116[1]; - u32 cm_l4per_i2c2_clkctrl; - u32 pad117[1]; - u32 cm_l4per_i2c3_clkctrl; - u32 pad118[1]; - u32 cm_l4per_i2c4_clkctrl; - u32 pad119[1]; - u32 cm_l4per_l4per_clkctrl; - u32 pad1191[3]; - u32 cm_l4per_mcasp2_clkctrl; - u32 pad120[1]; - u32 cm_l4per_mcasp3_clkctrl; - u32 pad121[1]; - u32 cm_l4per_mcbsp4_clkctrl; - u32 pad122[1]; - u32 cm_l4per_mgate_clkctrl; - u32 pad123[1]; - u32 cm_l4per_mcspi1_clkctrl; - u32 pad124[1]; - u32 cm_l4per_mcspi2_clkctrl; - u32 pad125[1]; - u32 cm_l4per_mcspi3_clkctrl; - u32 pad126[1]; - u32 cm_l4per_mcspi4_clkctrl; - u32 pad127[5]; - u32 cm_l4per_mmcsd3_clkctrl; - u32 pad128[1]; - u32 cm_l4per_mmcsd4_clkctrl; - u32 pad129[1]; - u32 cm_l4per_msprohg_clkctrl; - u32 pad130[1]; - u32 cm_l4per_slimbus2_clkctrl; - u32 pad131[1]; - u32 cm_l4per_uart1_clkctrl; - u32 pad132[1]; - u32 cm_l4per_uart2_clkctrl; - u32 pad133[1]; - u32 cm_l4per_uart3_clkctrl; - u32 pad134[1]; - u32 cm_l4per_uart4_clkctrl; - u32 pad135[1]; - u32 cm_l4per_mmcsd5_clkctrl; - u32 pad136[1]; - u32 cm_l4per_i2c5_clkctrl; - u32 pad137[5]; - u32 cm_l4sec_clkstctrl; - u32 cm_l4sec_staticdep; - u32 cm_l4sec_dynamicdep; - u32 pad138[5]; - u32 cm_l4sec_aes1_clkctrl; - u32 pad139[1]; - u32 cm_l4sec_aes2_clkctrl; - u32 pad140[1]; - u32 cm_l4sec_des3des_clkctrl; - u32 pad141[1]; - u32 cm_l4sec_pkaeip29_clkctrl; - u32 pad142[1]; - u32 cm_l4sec_rng_clkctrl; - u32 pad143[1]; - u32 cm_l4sec_sha2md51_clkctrl; - u32 pad144[3]; - u32 cm_l4sec_cryptodma_clkctrl; - u32 pad145[776841]; - - /* l4 wkup regs */ - u32 pad201[6211]; - u32 cm_abe_pll_ref_clksel; - u32 cm_sys_clksel; - u32 pad202[1467]; - u32 cm_wkup_clkstctrl; - u32 pad203[7]; - u32 cm_wkup_l4wkup_clkctrl; - u32 pad204; - u32 cm_wkup_wdtimer1_clkctrl; - u32 pad205; - u32 cm_wkup_wdtimer2_clkctrl; - u32 pad206; - u32 cm_wkup_gpio1_clkctrl; - u32 pad207; - u32 cm_wkup_gptimer1_clkctrl; - u32 pad208; - u32 cm_wkup_gptimer12_clkctrl; - u32 pad209; - u32 cm_wkup_synctimer_clkctrl; - u32 pad210; - u32 cm_wkup_usim_clkctrl; - u32 pad211; - u32 cm_wkup_sarram_clkctrl; - u32 pad212[5]; - u32 cm_wkup_keyboard_clkctrl; - u32 pad213; - u32 cm_wkup_rtc_clkctrl; - u32 pad214; - u32 cm_wkup_bandgap_clkctrl; - u32 pad215[197]; - u32 prm_vc_val_bypass; - u32 prm_vc_cfg_channel; - u32 prm_vc_cfg_i2c_mode; - u32 prm_vc_cfg_i2c_clk; - -}; - -struct omap4_scrm_regs { - u32 revision; /* 0x0000 */ - u32 pad00[63]; - u32 clksetuptime; /* 0x0100 */ - u32 pmicsetuptime; /* 0x0104 */ - u32 pad01[2]; - u32 altclksrc; /* 0x0110 */ - u32 pad02[2]; - u32 c2cclkm; /* 0x011c */ - u32 pad03[56]; - u32 extclkreq; /* 0x0200 */ - u32 accclkreq; /* 0x0204 */ - u32 pwrreq; /* 0x0208 */ - u32 pad04[1]; - u32 auxclkreq0; /* 0x0210 */ - u32 auxclkreq1; /* 0x0214 */ - u32 auxclkreq2; /* 0x0218 */ - u32 auxclkreq3; /* 0x021c */ - u32 auxclkreq4; /* 0x0220 */ - u32 auxclkreq5; /* 0x0224 */ - u32 pad05[3]; - u32 c2cclkreq; /* 0x0234 */ - u32 pad06[54]; - u32 auxclk0; /* 0x0310 */ - u32 auxclk1; /* 0x0314 */ - u32 auxclk2; /* 0x0318 */ - u32 auxclk3; /* 0x031c */ - u32 auxclk4; /* 0x0320 */ - u32 auxclk5; /* 0x0324 */ - u32 pad07[54]; - u32 rsttime_reg; /* 0x0400 */ - u32 pad08[6]; - u32 c2crstctrl; /* 0x041c */ - u32 extpwronrstctrl; /* 0x0420 */ - u32 pad09[59]; - u32 extwarmrstst_reg; /* 0x0510 */ - u32 apewarmrstst_reg; /* 0x0514 */ - u32 pad10[1]; - u32 c2cwarmrstst_reg; /* 0x051C */ -}; - /* DPLL register offsets */ #define CM_CLKMODE_DPLL 0 #define CM_IDLEST_DPLL 0x4 @@ -714,54 +242,44 @@ struct omap4_scrm_regs { #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 -#define NUM_SYS_CLKS 7 - -struct dpll_regs { - u32 cm_clkmode_dpll; - u32 cm_idlest_dpll; - u32 cm_autoidle_dpll; - u32 cm_clksel_dpll; - u32 cm_div_m2_dpll; - u32 cm_div_m3_dpll; - u32 cm_div_m4_dpll; - u32 cm_div_m5_dpll; - u32 cm_div_m6_dpll; - u32 cm_div_m7_dpll; -}; - -/* DPLL parameter table */ -struct dpll_params { - u32 m; - u32 n; - s8 m2; - s8 m3; - s8 m4; - s8 m5; - s8 m6; - s8 m7; +struct omap4_scrm_regs { + u32 revision; /* 0x0000 */ + u32 pad00[63]; + u32 clksetuptime; /* 0x0100 */ + u32 pmicsetuptime; /* 0x0104 */ + u32 pad01[2]; + u32 altclksrc; /* 0x0110 */ + u32 pad02[2]; + u32 c2cclkm; /* 0x011c */ + u32 pad03[56]; + u32 extclkreq; /* 0x0200 */ + u32 accclkreq; /* 0x0204 */ + u32 pwrreq; /* 0x0208 */ + u32 pad04[1]; + u32 auxclkreq0; /* 0x0210 */ + u32 auxclkreq1; /* 0x0214 */ + u32 auxclkreq2; /* 0x0218 */ + u32 auxclkreq3; /* 0x021c */ + u32 auxclkreq4; /* 0x0220 */ + u32 auxclkreq5; /* 0x0224 */ + u32 pad05[3]; + u32 c2cclkreq; /* 0x0234 */ + u32 pad06[54]; + u32 auxclk0; /* 0x0310 */ + u32 auxclk1; /* 0x0314 */ + u32 auxclk2; /* 0x0318 */ + u32 auxclk3; /* 0x031c */ + u32 auxclk4; /* 0x0320 */ + u32 auxclk5; /* 0x0324 */ + u32 pad07[54]; + u32 rsttime_reg; /* 0x0400 */ + u32 pad08[6]; + u32 c2crstctrl; /* 0x041c */ + u32 extpwronrstctrl; /* 0x0420 */ + u32 pad09[59]; + u32 extwarmrstst_reg; /* 0x0510 */ + u32 apewarmrstst_reg; /* 0x0514 */ + u32 pad10[1]; + u32 c2cwarmrstst_reg; /* 0x051C */ }; - -extern struct omap4_prcm_regs *const prcm; -extern const u32 sys_clk_array[8]; - -void scale_vcores(void); -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv); -u32 get_offset_code(u32 offset); -u32 omap_ddr_clk(void); -void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_post_dividers(u32 *const base, const struct dpll_params *params); -u32 get_sys_clk_index(void); -void enable_basic_clocks(void); -void enable_basic_uboot_clocks(void); -void enable_non_essential_clocks(void); -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, - u8 wait_for_enable); -const struct dpll_params *get_mpu_dpll_params(void); -const struct dpll_params *get_core_dpll_params(void); -const struct dpll_params *get_per_dpll_params(void); -const struct dpll_params *get_iva_dpll_params(void); -const struct dpll_params *get_usb_dpll_params(void); -const struct dpll_params *get_abe_dpll_params(void); #endif /* _CLOCKS_OMAP4_H_ */ diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h index 2114046..9c8ccb6 100644 --- a/arch/arm/include/asm/arch-omap4/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap4/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ @@ -33,142 +35,4 @@ #define OMAP_HSMMC2_BASE 0x480B4100 #define OMAP_HSMMC3_BASE 0x480AD100 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index d4b5076..5f321fe 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -132,34 +132,6 @@ struct s32ktimer { #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) #define DEVICE_GP 0x3 -struct omap_sys_ctrl_regs { - unsigned int pad1[129]; - unsigned int control_id_code; /* 0x4A002204 */ - unsigned int pad11[22]; - unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */ - unsigned int pad2[24]; /* 0x4a002264 */ - unsigned int control_status; /* 0x4a0022c4 */ - unsigned int pad3[22]; /* 0x4a0022c8 */ - unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */ - unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */ - unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */ - unsigned int pad4[260277]; - unsigned int control_pbiaslite; /* 0x4A100600 */ - unsigned int pad5[63]; - unsigned int control_efuse_1; /* 0x4A100700 */ - unsigned int control_efuse_2; /* 0x4A100704 */ -}; - -struct control_lpddr2io_regs { - unsigned int control_lpddr2io1_0; - unsigned int control_lpddr2io1_1; - unsigned int control_lpddr2io1_2; - unsigned int control_lpddr2io1_3; - unsigned int control_lpddr2io2_0; - unsigned int control_lpddr2io2_1; - unsigned int control_lpddr2io2_2; - unsigned int control_lpddr2io2_3; -}; #endif /* __ASSEMBLY__ */ /* @@ -178,7 +150,11 @@ struct control_lpddr2io_regs { #define OMAP4_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) #define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) -#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) +#define OMAP4_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) +#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24) /* ROM code defines */ /* Boot device */ diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h index cec84dc..4e094f9 100644 --- a/arch/arm/include/asm/arch-omap4/spl.h +++ b/arch/arm/include/asm/arch-omap4/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 0xFF diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index b48f81d..d5f1868 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -44,7 +44,7 @@ void sdelay(unsigned long); void set_pl310_ctrl_reg(u32 val); void setup_clocks_for_console(void); void prcm_init(void); -void bypass_dpll(u32 *const base); +void bypass_dpll(u32 const base); void freq_update_core(void); u32 get_sys_clk_freq(void); u32 omap4_ddr_clk(void); diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h index 5f1a7aa..cfde374 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clocks.h @@ -26,6 +26,7 @@ #ifndef _CLOCKS_OMAP5_H_ #define _CLOCKS_OMAP5_H_ #include <common.h> +#include <asm/omap_common.h> /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per @@ -39,456 +40,6 @@ #define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160) #define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100) -struct omap5_prcm_regs { - /* cm1.ckgen */ - u32 cm_clksel_core; /* 4a004100 */ - u32 pad001[1]; /* 4a004104 */ - u32 cm_clksel_abe; /* 4a004108 */ - u32 pad002[1]; /* 4a00410c */ - u32 cm_dll_ctrl; /* 4a004110 */ - u32 pad003[3]; /* 4a004114 */ - u32 cm_clkmode_dpll_core; /* 4a004120 */ - u32 cm_idlest_dpll_core; /* 4a004124 */ - u32 cm_autoidle_dpll_core; /* 4a004128 */ - u32 cm_clksel_dpll_core; /* 4a00412c */ - u32 cm_div_m2_dpll_core; /* 4a004130 */ - u32 cm_div_m3_dpll_core; /* 4a004134 */ - u32 cm_div_h11_dpll_core; /* 4a004138 */ - u32 cm_div_h12_dpll_core; /* 4a00413c */ - u32 cm_div_h13_dpll_core; /* 4a004140 */ - u32 cm_div_h14_dpll_core; /* 4a004144 */ - u32 cm_ssc_deltamstep_dpll_core; /* 4a004148 */ - u32 cm_ssc_modfreqdiv_dpll_core; /* 4a00414c */ - u32 cm_emu_override_dpll_core; /* 4a004150 */ - - u32 cm_div_h22_dpllcore; /* 4a004154 */ - u32 cm_div_h23_dpll_core; /* 4a004158 */ - u32 pad0041[1]; /* 4a00415c */ - u32 cm_clkmode_dpll_mpu; /* 4a004160 */ - u32 cm_idlest_dpll_mpu; /* 4a004164 */ - u32 cm_autoidle_dpll_mpu; /* 4a004168 */ - u32 cm_clksel_dpll_mpu; /* 4a00416c */ - u32 cm_div_m2_dpll_mpu; /* 4a004170 */ - u32 pad005[5]; /* 4a004174 */ - u32 cm_ssc_deltamstep_dpll_mpu; /* 4a004188 */ - u32 cm_ssc_modfreqdiv_dpll_mpu; /* 4a00418c */ - u32 pad006[3]; /* 4a004190 */ - u32 cm_bypclk_dpll_mpu; /* 4a00419c */ - u32 cm_clkmode_dpll_iva; /* 4a0041a0 */ - u32 cm_idlest_dpll_iva; /* 4a0041a4 */ - u32 cm_autoidle_dpll_iva; /* 4a0041a8 */ - u32 cm_clksel_dpll_iva; /* 4a0041ac */ - u32 pad007[2]; /* 4a0041b0 */ - u32 cm_div_h11_dpll_iva; /* 4a0041b8 */ - u32 cm_div_h12_dpll_iva; /* 4a0041bc */ - u32 pad008[2]; /* 4a0041c0 */ - u32 cm_ssc_deltamstep_dpll_iva; /* 4a0041c8 */ - u32 cm_ssc_modfreqdiv_dpll_iva; /* 4a0041cc */ - u32 pad009[3]; /* 4a0041d0 */ - u32 cm_bypclk_dpll_iva; /* 4a0041dc */ - u32 cm_clkmode_dpll_abe; /* 4a0041e0 */ - u32 cm_idlest_dpll_abe; /* 4a0041e4 */ - u32 cm_autoidle_dpll_abe; /* 4a0041e8 */ - u32 cm_clksel_dpll_abe; /* 4a0041ec */ - u32 cm_div_m2_dpll_abe; /* 4a0041f0 */ - u32 cm_div_m3_dpll_abe; /* 4a0041f4 */ - u32 pad010[4]; /* 4a0041f8 */ - u32 cm_ssc_deltamstep_dpll_abe; /* 4a004208 */ - u32 cm_ssc_modfreqdiv_dpll_abe; /* 4a00420c */ - u32 pad011[4]; /* 4a004210 */ - u32 cm_clkmode_dpll_ddrphy; /* 4a004220 */ - u32 cm_idlest_dpll_ddrphy; /* 4a004224 */ - u32 cm_autoidle_dpll_ddrphy; /* 4a004228 */ - u32 cm_clksel_dpll_ddrphy; /* 4a00422c */ - u32 cm_div_m2_dpll_ddrphy; /* 4a004230 */ - u32 pad012[1]; /* 4a004234 */ - u32 cm_div_h11_dpll_ddrphy; /* 4a004238 */ - u32 cm_div_h12_dpll_ddrphy; /* 4a00423c */ - u32 cm_div_h13_dpll_ddrphy; /* 4a004240 */ - u32 pad013[1]; /* 4a004244 */ - u32 cm_ssc_deltamstep_dpll_ddrphy; /* 4a004248 */ - u32 pad014[5]; /* 4a00424c */ - u32 cm_shadow_freq_config1; /* 4a004260 */ - u32 pad0141[47]; /* 4a004264 */ - u32 cm_mpu_mpu_clkctrl; /* 4a004320 */ - - - /* cm1.dsp */ - u32 pad015[55]; /* 4a004324 */ - u32 cm_dsp_clkstctrl; /* 4a004400 */ - u32 pad016[7]; /* 4a004404 */ - u32 cm_dsp_dsp_clkctrl; /* 4a004420 */ - - /* cm1.abe */ - u32 pad017[55]; /* 4a004424 */ - u32 cm1_abe_clkstctrl; /* 4a004500 */ - u32 pad018[7]; /* 4a004504 */ - u32 cm1_abe_l4abe_clkctrl; /* 4a004520 */ - u32 pad019[1]; /* 4a004524 */ - u32 cm1_abe_aess_clkctrl; /* 4a004528 */ - u32 pad020[1]; /* 4a00452c */ - u32 cm1_abe_pdm_clkctrl; /* 4a004530 */ - u32 pad021[1]; /* 4a004534 */ - u32 cm1_abe_dmic_clkctrl; /* 4a004538 */ - u32 pad022[1]; /* 4a00453c */ - u32 cm1_abe_mcasp_clkctrl; /* 4a004540 */ - u32 pad023[1]; /* 4a004544 */ - u32 cm1_abe_mcbsp1_clkctrl; /* 4a004548 */ - u32 pad024[1]; /* 4a00454c */ - u32 cm1_abe_mcbsp2_clkctrl; /* 4a004550 */ - u32 pad025[1]; /* 4a004554 */ - u32 cm1_abe_mcbsp3_clkctrl; /* 4a004558 */ - u32 pad026[1]; /* 4a00455c */ - u32 cm1_abe_slimbus_clkctrl; /* 4a004560 */ - u32 pad027[1]; /* 4a004564 */ - u32 cm1_abe_timer5_clkctrl; /* 4a004568 */ - u32 pad028[1]; /* 4a00456c */ - u32 cm1_abe_timer6_clkctrl; /* 4a004570 */ - u32 pad029[1]; /* 4a004574 */ - u32 cm1_abe_timer7_clkctrl; /* 4a004578 */ - u32 pad030[1]; /* 4a00457c */ - u32 cm1_abe_timer8_clkctrl; /* 4a004580 */ - u32 pad031[1]; /* 4a004584 */ - u32 cm1_abe_wdt3_clkctrl; /* 4a004588 */ - - /* cm2.ckgen */ - u32 pad032[3805]; /* 4a00458c */ - u32 cm_clksel_mpu_m3_iss_root; /* 4a008100 */ - u32 cm_clksel_usb_60mhz; /* 4a008104 */ - u32 cm_scale_fclk; /* 4a008108 */ - u32 pad033[1]; /* 4a00810c */ - u32 cm_core_dvfs_perf1; /* 4a008110 */ - u32 cm_core_dvfs_perf2; /* 4a008114 */ - u32 cm_core_dvfs_perf3; /* 4a008118 */ - u32 cm_core_dvfs_perf4; /* 4a00811c */ - u32 pad034[1]; /* 4a008120 */ - u32 cm_core_dvfs_current; /* 4a008124 */ - u32 cm_iva_dvfs_perf_tesla; /* 4a008128 */ - u32 cm_iva_dvfs_perf_ivahd; /* 4a00812c */ - u32 cm_iva_dvfs_perf_abe; /* 4a008130 */ - u32 pad035[1]; /* 4a008134 */ - u32 cm_iva_dvfs_current; /* 4a008138 */ - u32 pad036[1]; /* 4a00813c */ - u32 cm_clkmode_dpll_per; /* 4a008140 */ - u32 cm_idlest_dpll_per; /* 4a008144 */ - u32 cm_autoidle_dpll_per; /* 4a008148 */ - u32 cm_clksel_dpll_per; /* 4a00814c */ - u32 cm_div_m2_dpll_per; /* 4a008150 */ - u32 cm_div_m3_dpll_per; /* 4a008154 */ - u32 cm_div_h11_dpll_per; /* 4a008158 */ - u32 cm_div_h12_dpll_per; /* 4a00815c */ - u32 pad0361[1]; /* 4a008160 */ - u32 cm_div_h14_dpll_per; /* 4a008164 */ - u32 cm_ssc_deltamstep_dpll_per; /* 4a008168 */ - u32 cm_ssc_modfreqdiv_dpll_per; /* 4a00816c */ - u32 cm_emu_override_dpll_per; /* 4a008170 */ - u32 pad037[3]; /* 4a008174 */ - u32 cm_clkmode_dpll_usb; /* 4a008180 */ - u32 cm_idlest_dpll_usb; /* 4a008184 */ - u32 cm_autoidle_dpll_usb; /* 4a008188 */ - u32 cm_clksel_dpll_usb; /* 4a00818c */ - u32 cm_div_m2_dpll_usb; /* 4a008190 */ - u32 pad038[5]; /* 4a008194 */ - u32 cm_ssc_deltamstep_dpll_usb; /* 4a0081a8 */ - u32 cm_ssc_modfreqdiv_dpll_usb; /* 4a0081ac */ - u32 pad039[1]; /* 4a0081b0 */ - u32 cm_clkdcoldo_dpll_usb; /* 4a0081b4 */ - u32 pad040[2]; /* 4a0081b8 */ - u32 cm_clkmode_dpll_unipro; /* 4a0081c0 */ - u32 cm_idlest_dpll_unipro; /* 4a0081c4 */ - u32 cm_autoidle_dpll_unipro; /* 4a0081c8 */ - u32 cm_clksel_dpll_unipro; /* 4a0081cc */ - u32 cm_div_m2_dpll_unipro; /* 4a0081d0 */ - u32 pad041[5]; /* 4a0081d4 */ - u32 cm_ssc_deltamstep_dpll_unipro; /* 4a0081e8 */ - u32 cm_ssc_modfreqdiv_dpll_unipro; /* 4a0081ec */ - - /* cm2.core */ - u32 pad0411[324]; /* 4a0081f0 */ - u32 cm_l3_1_clkstctrl; /* 4a008700 */ - u32 pad042[1]; /* 4a008704 */ - u32 cm_l3_1_dynamicdep; /* 4a008708 */ - u32 pad043[5]; /* 4a00870c */ - u32 cm_l3_1_l3_1_clkctrl; /* 4a008720 */ - u32 pad044[55]; /* 4a008724 */ - u32 cm_l3_2_clkstctrl; /* 4a008800 */ - u32 pad045[1]; /* 4a008804 */ - u32 cm_l3_2_dynamicdep; /* 4a008808 */ - u32 pad046[5]; /* 4a00880c */ - u32 cm_l3_2_l3_2_clkctrl; /* 4a008820 */ - u32 pad047[1]; /* 4a008824 */ - u32 cm_l3_2_gpmc_clkctrl; /* 4a008828 */ - u32 pad048[1]; /* 4a00882c */ - u32 cm_l3_2_ocmc_ram_clkctrl; /* 4a008830 */ - u32 pad049[51]; /* 4a008834 */ - u32 cm_mpu_m3_clkstctrl; /* 4a008900 */ - u32 cm_mpu_m3_staticdep; /* 4a008904 */ - u32 cm_mpu_m3_dynamicdep; /* 4a008908 */ - u32 pad050[5]; /* 4a00890c */ - u32 cm_mpu_m3_mpu_m3_clkctrl; /* 4a008920 */ - u32 pad051[55]; /* 4a008924 */ - u32 cm_sdma_clkstctrl; /* 4a008a00 */ - u32 cm_sdma_staticdep; /* 4a008a04 */ - u32 cm_sdma_dynamicdep; /* 4a008a08 */ - u32 pad052[5]; /* 4a008a0c */ - u32 cm_sdma_sdma_clkctrl; /* 4a008a20 */ - u32 pad053[55]; /* 4a008a24 */ - u32 cm_memif_clkstctrl; /* 4a008b00 */ - u32 pad054[7]; /* 4a008b04 */ - u32 cm_memif_dmm_clkctrl; /* 4a008b20 */ - u32 pad055[1]; /* 4a008b24 */ - u32 cm_memif_emif_fw_clkctrl; /* 4a008b28 */ - u32 pad056[1]; /* 4a008b2c */ - u32 cm_memif_emif_1_clkctrl; /* 4a008b30 */ - u32 pad057[1]; /* 4a008b34 */ - u32 cm_memif_emif_2_clkctrl; /* 4a008b38 */ - u32 pad058[1]; /* 4a008b3c */ - u32 cm_memif_dll_clkctrl; /* 4a008b40 */ - u32 pad059[3]; /* 4a008b44 */ - u32 cm_memif_emif_h1_clkctrl; /* 4a008b50 */ - u32 pad060[1]; /* 4a008b54 */ - u32 cm_memif_emif_h2_clkctrl; /* 4a008b58 */ - u32 pad061[1]; /* 4a008b5c */ - u32 cm_memif_dll_h_clkctrl; /* 4a008b60 */ - u32 pad062[39]; /* 4a008b64 */ - u32 cm_c2c_clkstctrl; /* 4a008c00 */ - u32 cm_c2c_staticdep; /* 4a008c04 */ - u32 cm_c2c_dynamicdep; /* 4a008c08 */ - u32 pad063[5]; /* 4a008c0c */ - u32 cm_c2c_sad2d_clkctrl; /* 4a008c20 */ - u32 pad064[1]; /* 4a008c24 */ - u32 cm_c2c_modem_icr_clkctrl; /* 4a008c28 */ - u32 pad065[1]; /* 4a008c2c */ - u32 cm_c2c_sad2d_fw_clkctrl; /* 4a008c30 */ - u32 pad066[51]; /* 4a008c34 */ - u32 cm_l4cfg_clkstctrl; /* 4a008d00 */ - u32 pad067[1]; /* 4a008d04 */ - u32 cm_l4cfg_dynamicdep; /* 4a008d08 */ - u32 pad068[5]; /* 4a008d0c */ - u32 cm_l4cfg_l4_cfg_clkctrl; /* 4a008d20 */ - u32 pad069[1]; /* 4a008d24 */ - u32 cm_l4cfg_hw_sem_clkctrl; /* 4a008d28 */ - u32 pad070[1]; /* 4a008d2c */ - u32 cm_l4cfg_mailbox_clkctrl; /* 4a008d30 */ - u32 pad071[1]; /* 4a008d34 */ - u32 cm_l4cfg_sar_rom_clkctrl; /* 4a008d38 */ - u32 pad072[49]; /* 4a008d3c */ - u32 cm_l3instr_clkstctrl; /* 4a008e00 */ - u32 pad073[7]; /* 4a008e04 */ - u32 cm_l3instr_l3_3_clkctrl; /* 4a008e20 */ - u32 pad074[1]; /* 4a008e24 */ - u32 cm_l3instr_l3_instr_clkctrl; /* 4a008e28 */ - u32 pad075[5]; /* 4a008e2c */ - u32 cm_l3instr_intrconn_wp1_clkctrl; /* 4a008e40 */ - - - /* cm2.ivahd */ - u32 pad076[47]; /* 4a008e44 */ - u32 cm_ivahd_clkstctrl; /* 4a008f00 */ - u32 pad077[7]; /* 4a008f04 */ - u32 cm_ivahd_ivahd_clkctrl; /* 4a008f20 */ - u32 pad078[1]; /* 4a008f24 */ - u32 cm_ivahd_sl2_clkctrl; /* 4a008f28 */ - - /* cm2.cam */ - u32 pad079[53]; /* 4a008f2c */ - u32 cm_cam_clkstctrl; /* 4a009000 */ - u32 pad080[7]; /* 4a009004 */ - u32 cm_cam_iss_clkctrl; /* 4a009020 */ - u32 pad081[1]; /* 4a009024 */ - u32 cm_cam_fdif_clkctrl; /* 4a009028 */ - - /* cm2.dss */ - u32 pad082[53]; /* 4a00902c */ - u32 cm_dss_clkstctrl; /* 4a009100 */ - u32 pad083[7]; /* 4a009104 */ - u32 cm_dss_dss_clkctrl; /* 4a009120 */ - - /* cm2.sgx */ - u32 pad084[55]; /* 4a009124 */ - u32 cm_sgx_clkstctrl; /* 4a009200 */ - u32 pad085[7]; /* 4a009204 */ - u32 cm_sgx_sgx_clkctrl; /* 4a009220 */ - - /* cm2.l3init */ - u32 pad086[55]; /* 4a009224 */ - u32 cm_l3init_clkstctrl; /* 4a009300 */ - - /* cm2.l3init */ - u32 pad087[9]; /* 4a009304 */ - u32 cm_l3init_hsmmc1_clkctrl; /* 4a009328 */ - u32 pad088[1]; /* 4a00932c */ - u32 cm_l3init_hsmmc2_clkctrl; /* 4a009330 */ - u32 pad089[1]; /* 4a009334 */ - u32 cm_l3init_hsi_clkctrl; /* 4a009338 */ - u32 pad090[7]; /* 4a00933c */ - u32 cm_l3init_hsusbhost_clkctrl; /* 4a009358 */ - u32 pad091[1]; /* 4a00935c */ - u32 cm_l3init_hsusbotg_clkctrl; /* 4a009360 */ - u32 pad092[1]; /* 4a009364 */ - u32 cm_l3init_hsusbtll_clkctrl; /* 4a009368 */ - u32 pad093[3]; /* 4a00936c */ - u32 cm_l3init_p1500_clkctrl; /* 4a009378 */ - u32 pad094[21]; /* 4a00937c */ - u32 cm_l3init_fsusb_clkctrl; /* 4a0093d0 */ - u32 pad095[3]; /* 4a0093d4 */ - u32 cm_l3init_ocp2scp1_clkctrl; - - /* cm2.l4per */ - u32 pad096[7]; /* 4a0093e4 */ - u32 cm_l4per_clkstctrl; /* 4a009400 */ - u32 pad097[1]; /* 4a009404 */ - u32 cm_l4per_dynamicdep; /* 4a009408 */ - u32 pad098[5]; /* 4a00940c */ - u32 cm_l4per_adc_clkctrl; /* 4a009420 */ - u32 pad100[1]; /* 4a009424 */ - u32 cm_l4per_gptimer10_clkctrl; /* 4a009428 */ - u32 pad101[1]; /* 4a00942c */ - u32 cm_l4per_gptimer11_clkctrl; /* 4a009430 */ - u32 pad102[1]; /* 4a009434 */ - u32 cm_l4per_gptimer2_clkctrl; /* 4a009438 */ - u32 pad103[1]; /* 4a00943c */ - u32 cm_l4per_gptimer3_clkctrl; /* 4a009440 */ - u32 pad104[1]; /* 4a009444 */ - u32 cm_l4per_gptimer4_clkctrl; /* 4a009448 */ - u32 pad105[1]; /* 4a00944c */ - u32 cm_l4per_gptimer9_clkctrl; /* 4a009450 */ - u32 pad106[1]; /* 4a009454 */ - u32 cm_l4per_elm_clkctrl; /* 4a009458 */ - u32 pad107[1]; /* 4a00945c */ - u32 cm_l4per_gpio2_clkctrl; /* 4a009460 */ - u32 pad108[1]; /* 4a009464 */ - u32 cm_l4per_gpio3_clkctrl; /* 4a009468 */ - u32 pad109[1]; /* 4a00946c */ - u32 cm_l4per_gpio4_clkctrl; /* 4a009470 */ - u32 pad110[1]; /* 4a009474 */ - u32 cm_l4per_gpio5_clkctrl; /* 4a009478 */ - u32 pad111[1]; /* 4a00947c */ - u32 cm_l4per_gpio6_clkctrl; /* 4a009480 */ - u32 pad112[1]; /* 4a009484 */ - u32 cm_l4per_hdq1w_clkctrl; /* 4a009488 */ - u32 pad113[1]; /* 4a00948c */ - u32 cm_l4per_hecc1_clkctrl; /* 4a009490 */ - u32 pad114[1]; /* 4a009494 */ - u32 cm_l4per_hecc2_clkctrl; /* 4a009498 */ - u32 pad115[1]; /* 4a00949c */ - u32 cm_l4per_i2c1_clkctrl; /* 4a0094a0 */ - u32 pad116[1]; /* 4a0094a4 */ - u32 cm_l4per_i2c2_clkctrl; /* 4a0094a8 */ - u32 pad117[1]; /* 4a0094ac */ - u32 cm_l4per_i2c3_clkctrl; /* 4a0094b0 */ - u32 pad118[1]; /* 4a0094b4 */ - u32 cm_l4per_i2c4_clkctrl; /* 4a0094b8 */ - u32 pad119[1]; /* 4a0094bc */ - u32 cm_l4per_l4per_clkctrl; /* 4a0094c0 */ - u32 pad1191[3]; /* 4a0094c4 */ - u32 cm_l4per_mcasp2_clkctrl; /* 4a0094d0 */ - u32 pad120[1]; /* 4a0094d4 */ - u32 cm_l4per_mcasp3_clkctrl; /* 4a0094d8 */ - u32 pad121[3]; /* 4a0094dc */ - u32 cm_l4per_mgate_clkctrl; /* 4a0094e8 */ - u32 pad123[1]; /* 4a0094ec */ - u32 cm_l4per_mcspi1_clkctrl; /* 4a0094f0 */ - u32 pad124[1]; /* 4a0094f4 */ - u32 cm_l4per_mcspi2_clkctrl; /* 4a0094f8 */ - u32 pad125[1]; /* 4a0094fc */ - u32 cm_l4per_mcspi3_clkctrl; /* 4a009500 */ - u32 pad126[1]; /* 4a009504 */ - u32 cm_l4per_mcspi4_clkctrl; /* 4a009508 */ - u32 pad127[1]; /* 4a00950c */ - u32 cm_l4per_gpio7_clkctrl; /* 4a009510 */ - u32 pad1271[1]; /* 4a009514 */ - u32 cm_l4per_gpio8_clkctrl; /* 4a009518 */ - u32 pad1272[1]; /* 4a00951c */ - u32 cm_l4per_mmcsd3_clkctrl; /* 4a009520 */ - u32 pad128[1]; /* 4a009524 */ - u32 cm_l4per_mmcsd4_clkctrl; /* 4a009528 */ - u32 pad129[1]; /* 4a00952c */ - u32 cm_l4per_msprohg_clkctrl; /* 4a009530 */ - u32 pad130[1]; /* 4a009534 */ - u32 cm_l4per_slimbus2_clkctrl; /* 4a009538 */ - u32 pad131[1]; /* 4a00953c */ - u32 cm_l4per_uart1_clkctrl; /* 4a009540 */ - u32 pad132[1]; /* 4a009544 */ - u32 cm_l4per_uart2_clkctrl; /* 4a009548 */ - u32 pad133[1]; /* 4a00954c */ - u32 cm_l4per_uart3_clkctrl; /* 4a009550 */ - u32 pad134[1]; /* 4a009554 */ - u32 cm_l4per_uart4_clkctrl; /* 4a009558 */ - u32 pad135[1]; /* 4a00955c */ - u32 cm_l4per_mmcsd5_clkctrl; /* 4a009560 */ - u32 pad136[1]; /* 4a009564 */ - u32 cm_l4per_i2c5_clkctrl; /* 4a009568 */ - u32 pad1371[1]; /* 4a00956c */ - u32 cm_l4per_uart5_clkctrl; /* 4a009570 */ - u32 pad1372[1]; /* 4a009574 */ - u32 cm_l4per_uart6_clkctrl; /* 4a009578 */ - u32 pad1374[1]; /* 4a00957c */ - u32 cm_l4sec_clkstctrl; /* 4a009580 */ - u32 cm_l4sec_staticdep; /* 4a009584 */ - u32 cm_l4sec_dynamicdep; /* 4a009588 */ - u32 pad138[5]; /* 4a00958c */ - u32 cm_l4sec_aes1_clkctrl; /* 4a0095a0 */ - u32 pad139[1]; /* 4a0095a4 */ - u32 cm_l4sec_aes2_clkctrl; /* 4a0095a8 */ - u32 pad140[1]; /* 4a0095ac */ - u32 cm_l4sec_des3des_clkctrl; /* 4a0095b0 */ - u32 pad141[1]; /* 4a0095b4 */ - u32 cm_l4sec_pkaeip29_clkctrl; /* 4a0095b8 */ - u32 pad142[1]; /* 4a0095bc */ - u32 cm_l4sec_rng_clkctrl; /* 4a0095c0 */ - u32 pad143[1]; /* 4a0095c4 */ - u32 cm_l4sec_sha2md51_clkctrl; /* 4a0095c8 */ - u32 pad144[3]; /* 4a0095cc */ - u32 cm_l4sec_cryptodma_clkctrl; /* 4a0095d8 */ - u32 pad145[3660425]; /* 4a0095dc */ - - /* l4 wkup regs */ - u32 pad201[6211]; /* 4ae00000 */ - u32 cm_abe_pll_ref_clksel; /* 4ae0610c */ - u32 cm_sys_clksel; /* 4ae06110 */ - u32 pad202[1467]; /* 4ae06114 */ - u32 cm_wkup_clkstctrl; /* 4ae07800 */ - u32 pad203[7]; /* 4ae07804 */ - u32 cm_wkup_l4wkup_clkctrl; /* 4ae07820 */ - u32 pad204; /* 4ae07824 */ - u32 cm_wkup_wdtimer1_clkctrl; /* 4ae07828 */ - u32 pad205; /* 4ae0782c */ - u32 cm_wkup_wdtimer2_clkctrl; /* 4ae07830 */ - u32 pad206; /* 4ae07834 */ - u32 cm_wkup_gpio1_clkctrl; /* 4ae07838 */ - u32 pad207; /* 4ae0783c */ - u32 cm_wkup_gptimer1_clkctrl; /* 4ae07840 */ - u32 pad208; /* 4ae07844 */ - u32 cm_wkup_gptimer12_clkctrl; /* 4ae07848 */ - u32 pad209; /* 4ae0784c */ - u32 cm_wkup_synctimer_clkctrl; /* 4ae07850 */ - u32 pad210; /* 4ae07854 */ - u32 cm_wkup_usim_clkctrl; /* 4ae07858 */ - u32 pad211; /* 4ae0785c */ - u32 cm_wkup_sarram_clkctrl; /* 4ae07860 */ - u32 pad212[5]; /* 4ae07864 */ - u32 cm_wkup_keyboard_clkctrl; /* 4ae07878 */ - u32 pad213; /* 4ae0787c */ - u32 cm_wkup_rtc_clkctrl; /* 4ae07880 */ - u32 pad214; /* 4ae07884 */ - u32 cm_wkup_bandgap_clkctrl; /* 4ae07888 */ - u32 pad215[1]; /* 4ae0788c */ - u32 cm_wkupaon_scrm_clkctrl; /* 4ae07890 */ - u32 pad216[195]; - u32 prm_vc_val_bypass; /* 4ae07ba0 */ - u32 pad217[4]; - u32 prm_vc_cfg_i2c_mode; /* 4ae07bb4 */ - u32 prm_vc_cfg_i2c_clk; /* 4ae07bb8 */ - u32 pad218[2]; - u32 prm_sldo_core_setup; /* 4ae07bc4 */ - u32 prm_sldo_core_ctrl; /* 4ae07bc8 */ - u32 prm_sldo_mpu_setup; /* 4ae07bcc */ - u32 prm_sldo_mpu_ctrl; /* 4ae07bd0 */ - u32 prm_sldo_mm_setup; /* 4ae07bd4 */ - u32 prm_sldo_mm_ctrl; /* 4ae07bd8 */ -}; - /* DPLL register offsets */ #define CM_CLKMODE_DPLL 0 #define CM_IDLEST_DPLL 0x4 @@ -625,9 +176,9 @@ struct omap5_prcm_regs { /* CM_MPU_MPU_CLKCTRL */ #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 -#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24) -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25 -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24) +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 26 +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 26) /* CM_WKUPAON_SCRM_CLKCTRL */ #define OPTFCLKEN_SCRM_PER_SHIFT 9 @@ -635,6 +186,10 @@ struct omap5_prcm_regs { #define OPTFCLKEN_SCRM_CORE_SHIFT 8 #define OPTFCLKEN_SCRM_CORE_MASK (1 << 8) +/* CM_COREAON_IO_SRCOMP_CLKCTRL */ +#define OPTFCLKEN_SRCOMP_FCLK_SHIFT 8 +#define OPTFCLKEN_SRCOMP_FCLK_MASK (1 << 8) + /* Clock frequencies */ #define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 @@ -650,12 +205,25 @@ struct omap5_prcm_regs { #define SMPS_REG_ADDR_8_CORE 0x37 /* PALMAS VOLTAGE SETTINGS in mv for OPP_NOMINAL */ -#define VDD_MPU 1000 -#define VDD_MM 1000 +/* ES1.0 settings */ +#define VDD_MPU 1040 +#define VDD_MM 1040 #define VDD_CORE 1040 -#define VDD_MPU_5432 1150 -#define VDD_MM_5432 1150 -#define VDD_CORE_5432 1150 + +#define VDD_MPU_LOW 890 +#define VDD_MM_LOW 890 +#define VDD_CORE_LOW 890 + +/* ES2.0 settings */ +#define VDD_MPU_ES2 1060 +#define VDD_MM_ES2 1025 +#define VDD_CORE_ES2 1040 + +#define VDD_MPU_ES2_HIGH 1250 +#define VDD_MM_ES2_OD 1120 + +#define VDD_MPU_ES2_LOW 880 +#define VDD_MM_ES2_LOW 880 /* Standard offset is 0.5v expressed in uv */ #define PALMAS_SMPS_BASE_VOLT_UV 500000 @@ -683,59 +251,4 @@ struct omap5_prcm_regs { #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 -#define NUM_SYS_CLKS 7 - -struct dpll_regs { - u32 cm_clkmode_dpll; - u32 cm_idlest_dpll; - u32 cm_autoidle_dpll; - u32 cm_clksel_dpll; - u32 cm_div_m2_dpll; - u32 cm_div_m3_dpll; - u32 cm_div_h11_dpll; - u32 cm_div_h12_dpll; - u32 cm_div_h13_dpll; - u32 cm_div_h14_dpll; - u32 reserved[3]; - u32 cm_div_h22_dpll; - u32 cm_div_h23_dpll; -}; - -/* DPLL parameter table */ -struct dpll_params { - u32 m; - u32 n; - s8 m2; - s8 m3; - s8 h11; - s8 h12; - s8 h13; - s8 h14; - s8 h22; - s8 h23; -}; - -extern struct omap5_prcm_regs *const prcm; -extern const u32 sys_clk_array[8]; - -void scale_vcores(void); -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv); -u32 get_offset_code(u32 offset); -u32 omap_ddr_clk(void); -void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_post_dividers(u32 *const base, const struct dpll_params *params); -u32 get_sys_clk_index(void); -void enable_basic_clocks(void); -void enable_non_essential_clocks(void); -void enable_basic_uboot_clocks(void); -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, - u8 wait_for_enable); -const struct dpll_params *get_mpu_dpll_params(void); -const struct dpll_params *get_core_dpll_params(void); -const struct dpll_params *get_per_dpll_params(void); -const struct dpll_params *get_iva_dpll_params(void); -const struct dpll_params *get_usb_dpll_params(void); -const struct dpll_params *get_abe_dpll_params(void); #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/mmc_host_def.h b/arch/arm/include/asm/arch-omap5/mmc_host_def.h index 2114046..9c8ccb6 100644 --- a/arch/arm/include/asm/arch-omap5/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap5/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ @@ -33,142 +35,4 @@ #define OMAP_HSMMC2_BASE 0x480B4100 #define OMAP_HSMMC3_BASE 0x480AD100 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h new file mode 100644 index 0000000..55e9de6 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -0,0 +1,344 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated + * + * Nishant Kamat <nskamat@ti.com> + * Lokesh Vutla <lokeshvutla@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_DRA7XX_H_ +#define _MUX_DRA7XX_H_ + +#include <asm/types.h> + +#define IEN (1 << 18) +#define IDIS (0 << 18) + +#define PTU (3 << 16) +#define PTD (1 << 16) +#define PEN (1 << 16) +#define PDIS (0 << 16) + +#define WKEN (1 << 24) +#define WKDIS (0 << 24) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 +#define M8 8 +#define M9 9 +#define M10 10 +#define M11 11 +#define M12 12 +#define M13 13 +#define M14 14 +#define M15 15 + +#define SAFE_MODE M15 + +#define GPMC_AD0 0x000 +#define GPMC_AD1 0x004 +#define GPMC_AD2 0x008 +#define GPMC_AD3 0x00C +#define GPMC_AD4 0x010 +#define GPMC_AD5 0x014 +#define GPMC_AD6 0x018 +#define GPMC_AD7 0x01C +#define GPMC_AD8 0x020 +#define GPMC_AD9 0x024 +#define GPMC_AD10 0x028 +#define GPMC_AD11 0x02C +#define GPMC_AD12 0x030 +#define GPMC_AD13 0x034 +#define GPMC_AD14 0x038 +#define GPMC_AD15 0x03C +#define GPMC_A0 0x040 +#define GPMC_A1 0x044 +#define GPMC_A2 0x048 +#define GPMC_A3 0x04C +#define GPMC_A4 0x050 +#define GPMC_A5 0x054 +#define GPMC_A6 0x058 +#define GPMC_A7 0x05C +#define GPMC_A8 0x060 +#define GPMC_A9 0x064 +#define GPMC_A10 0x068 +#define GPMC_A11 0x06C +#define GPMC_A12 0x070 +#define GPMC_A13 0x074 +#define GPMC_A14 0x078 +#define GPMC_A15 0x07C +#define GPMC_A16 0x080 +#define GPMC_A17 0x084 +#define GPMC_A18 0x088 +#define GPMC_A19 0x08C +#define GPMC_A20 0x090 +#define GPMC_A21 0x094 +#define GPMC_A22 0x098 +#define GPMC_A23 0x09C +#define GPMC_A24 0x0A0 +#define GPMC_A25 0x0A4 +#define GPMC_A26 0x0A8 +#define GPMC_A27 0x0AC +#define GPMC_CS1 0x0B0 +#define GPMC_CS0 0x0B4 +#define GPMC_CS2 0x0B8 +#define GPMC_CS3 0x0BC +#define GPMC_CLK 0x0C0 +#define GPMC_ADVN_ALE 0x0C4 +#define GPMC_OEN_REN 0x0C8 +#define GPMC_WEN 0x0CC +#define GPMC_BEN0 0x0D0 +#define GPMC_BEN1 0x0D4 +#define GPMC_WAIT0 0x0D8 +#define VIN1A_CLK0 0x0DC +#define VIN1B_CLK1 0x0E0 +#define VIN1A_DE0 0x0E4 +#define VIN1A_FLD0 0x0E8 +#define VIN1A_HSYNC0 0x0EC +#define VIN1A_VSYNC0 0x0F0 +#define VIN1A_D0 0x0F4 +#define VIN1A_D1 0x0F8 +#define VIN1A_D2 0x0FC +#define VIN1A_D3 0x100 +#define VIN1A_D4 0x104 +#define VIN1A_D5 0x108 +#define VIN1A_D6 0x10C +#define VIN1A_D7 0x110 +#define VIN1A_D8 0x114 +#define VIN1A_D9 0x118 +#define VIN1A_D10 0x11C +#define VIN1A_D11 0x120 +#define VIN1A_D12 0x124 +#define VIN1A_D13 0x128 +#define VIN1A_D14 0x12C +#define VIN1A_D15 0x130 +#define VIN1A_D16 0x134 +#define VIN1A_D17 0x138 +#define VIN1A_D18 0x13C +#define VIN1A_D19 0x140 +#define VIN1A_D20 0x144 +#define VIN1A_D21 0x148 +#define VIN1A_D22 0x14C +#define VIN1A_D23 0x150 +#define VIN2A_CLK0 0x154 +#define VIN2A_DE0 0x158 +#define VIN2A_FLD0 0x15C +#define VIN2A_HSYNC0 0x160 +#define VIN2A_VSYNC0 0x164 +#define VIN2A_D0 0x168 +#define VIN2A_D1 0x16C +#define VIN2A_D2 0x170 +#define VIN2A_D3 0x174 +#define VIN2A_D4 0x178 +#define VIN2A_D5 0x17C +#define VIN2A_D6 0x180 +#define VIN2A_D7 0x184 +#define VIN2A_D8 0x188 +#define VIN2A_D9 0x18C +#define VIN2A_D10 0x190 +#define VIN2A_D11 0x194 +#define VIN2A_D12 0x198 +#define VIN2A_D13 0x19C +#define VIN2A_D14 0x1A0 +#define VIN2A_D15 0x1A4 +#define VIN2A_D16 0x1A8 +#define VIN2A_D17 0x1AC +#define VIN2A_D18 0x1B0 +#define VIN2A_D19 0x1B4 +#define VIN2A_D20 0x1B8 +#define VIN2A_D21 0x1BC +#define VIN2A_D22 0x1C0 +#define VIN2A_D23 0x1C4 +#define VOUT1_CLK 0x1C8 +#define VOUT1_DE 0x1CC +#define VOUT1_FLD 0x1D0 +#define VOUT1_HSYNC 0x1D4 +#define VOUT1_VSYNC 0x1D8 +#define VOUT1_D0 0x1DC +#define VOUT1_D1 0x1E0 +#define VOUT1_D2 0x1E4 +#define VOUT1_D3 0x1E8 +#define VOUT1_D4 0x1EC +#define VOUT1_D5 0x1F0 +#define VOUT1_D6 0x1F4 +#define VOUT1_D7 0x1F8 +#define VOUT1_D8 0x1FC +#define VOUT1_D9 0x200 +#define VOUT1_D10 0x204 +#define VOUT1_D11 0x208 +#define VOUT1_D12 0x20C +#define VOUT1_D13 0x210 +#define VOUT1_D14 0x214 +#define VOUT1_D15 0x218 +#define VOUT1_D16 0x21C +#define VOUT1_D17 0x220 +#define VOUT1_D18 0x224 +#define VOUT1_D19 0x228 +#define VOUT1_D20 0x22C +#define VOUT1_D21 0x230 +#define VOUT1_D22 0x234 +#define VOUT1_D23 0x238 +#define MDIO_MCLK 0x23C +#define MDIO_D 0x240 +#define RMII_MHZ_50_CLK 0x244 +#define UART3_RXD 0x248 +#define UART3_TXD 0x24C +#define RGMII0_TXC 0x250 +#define RGMII0_TXCTL 0x254 +#define RGMII0_TXD3 0x258 +#define RGMII0_TXD2 0x25C +#define RGMII0_TXD1 0x260 +#define RGMII0_TXD0 0x264 +#define RGMII0_RXC 0x268 +#define RGMII0_RXCTL 0x26C +#define RGMII0_RXD3 0x270 +#define RGMII0_RXD2 0x274 +#define RGMII0_RXD1 0x278 +#define RGMII0_RXD0 0x27C +#define USB1_DRVVBUS 0x280 +#define USB2_DRVVBUS 0x284 +#define GPIO6_14 0x288 +#define GPIO6_15 0x28C +#define GPIO6_16 0x290 +#define XREF_CLK0 0x294 +#define XREF_CLK1 0x298 +#define XREF_CLK2 0x29C +#define XREF_CLK3 0x2A0 +#define MCASP1_ACLKX 0x2A4 +#define MCASP1_FSX 0x2A8 +#define MCASP1_ACLKR 0x2AC +#define MCASP1_FSR 0x2B0 +#define MCASP1_AXR0 0x2B4 +#define MCASP1_AXR1 0x2B8 +#define MCASP1_AXR2 0x2BC +#define MCASP1_AXR3 0x2C0 +#define MCASP1_AXR4 0x2C4 +#define MCASP1_AXR5 0x2C8 +#define MCASP1_AXR6 0x2CC +#define MCASP1_AXR7 0x2D0 +#define MCASP1_AXR8 0x2D4 +#define MCASP1_AXR9 0x2D8 +#define MCASP1_AXR10 0x2DC +#define MCASP1_AXR11 0x2E0 +#define MCASP1_AXR12 0x2E4 +#define MCASP1_AXR13 0x2E8 +#define MCASP1_AXR14 0x2EC +#define MCASP1_AXR15 0x2F0 +#define MCASP2_ACLKX 0x2F4 +#define MCASP2_FSX 0x2F8 +#define MCASP2_ACLKR 0x2FC +#define MCASP2_FSR 0x300 +#define MCASP2_AXR0 0x304 +#define MCASP2_AXR1 0x308 +#define MCASP2_AXR2 0x30C +#define MCASP2_AXR3 0x310 +#define MCASP2_AXR4 0x314 +#define MCASP2_AXR5 0x318 +#define MCASP2_AXR6 0x31C +#define MCASP2_AXR7 0x320 +#define MCASP3_ACLKX 0x324 +#define MCASP3_FSX 0x328 +#define MCASP3_AXR0 0x32C +#define MCASP3_AXR1 0x330 +#define MCASP4_ACLKX 0x334 +#define MCASP4_FSX 0x338 +#define MCASP4_AXR0 0x33C +#define MCASP4_AXR1 0x340 +#define MCASP5_ACLKX 0x344 +#define MCASP5_FSX 0x348 +#define MCASP5_AXR0 0x34C +#define MCASP5_AXR1 0x350 +#define MMC1_CLK 0x354 +#define MMC1_CMD 0x358 +#define MMC1_DAT0 0x35C +#define MMC1_DAT1 0x360 +#define MMC1_DAT2 0x364 +#define MMC1_DAT3 0x368 +#define MMC1_SDCD 0x36C +#define MMC1_SDWP 0x370 +#define GPIO6_10 0x374 +#define GPIO6_11 0x378 +#define MMC3_CLK 0x37C +#define MMC3_CMD 0x380 +#define MMC3_DAT0 0x384 +#define MMC3_DAT1 0x388 +#define MMC3_DAT2 0x38C +#define MMC3_DAT3 0x390 +#define MMC3_DAT4 0x394 +#define MMC3_DAT5 0x398 +#define MMC3_DAT6 0x39C +#define MMC3_DAT7 0x3A0 +#define SPI1_SCLK 0x3A4 +#define SPI1_D1 0x3A8 +#define SPI1_D0 0x3AC +#define SPI1_CS0 0x3B0 +#define SPI1_CS1 0x3B4 +#define SPI1_CS2 0x3B8 +#define SPI1_CS3 0x3BC +#define SPI2_SCLK 0x3C0 +#define SPI2_D1 0x3C4 +#define SPI2_D0 0x3C8 +#define SPI2_CS0 0x3CC +#define DCAN1_TX 0x3D0 +#define DCAN1_RX 0x3D4 +#define DCAN2_TX 0x3D8 +#define DCAN2_RX 0x3DC +#define UART1_RXD 0x3E0 +#define UART1_TXD 0x3E4 +#define UART1_CTSN 0x3E8 +#define UART1_RTSN 0x3EC +#define UART2_RXD 0x3F0 +#define UART2_TXD 0x3F4 +#define UART2_CTSN 0x3F8 +#define UART2_RTSN 0x3FC +#define I2C1_SDA 0x400 +#define I2C1_SCL 0x404 +#define I2C2_SDA 0x408 +#define I2C2_SCL 0x40C +#define I2C3_SDA 0x410 +#define I2C3_SCL 0x414 +#define WAKEUP0 0x418 +#define WAKEUP1 0x41C +#define WAKEUP2 0x420 +#define WAKEUP3 0x424 +#define ON_OFF 0x428 +#define RTC_PORZ 0x42C +#define TMS 0x430 +#define TDI 0x434 +#define TDO 0x438 +#define TCLK 0x43C +#define TRSTN 0x440 +#define RTCK 0x444 +#define EMU0 0x448 +#define EMU1 0x44C +#define EMU2 0x450 +#define EMU3 0x454 +#define EMU4 0x458 +#define RESETN 0x45C +#define NMIN 0x460 +#define RSTOUTN 0x464 + +#endif /* _MUX_DRA7XX_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/mux_omap5.h b/arch/arm/include/asm/arch-omap5/mux_omap5.h index 4a6ed8b..34b0dbd 100644 --- a/arch/arm/include/asm/arch-omap5/mux_omap5.h +++ b/arch/arm/include/asm/arch-omap5/mux_omap5.h @@ -28,14 +28,6 @@ #include <asm/types.h> -struct pad_conf_entry { - - u16 offset; - - u16 val; - -}; - #ifdef CONFIG_OFF_PADCONF #define OFF_PD (1 << 12) #define OFF_PU (3 << 12) diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 9dce49a..b632635 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -57,7 +57,10 @@ /* To be verified */ #define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F +#define OMAP5430_CONTROL_ID_CODE_ES2_0 0x1B94202F #define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F +#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F +#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F /* STD_FUSE_PROD_ID_1 */ #define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218) @@ -131,87 +134,6 @@ struct s32ktimer { #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) #define DEVICE_GP 0x3 -struct omap_sys_ctrl_regs { - u32 pad0[77]; /* 0x4A002000 */ - u32 control_status; /* 0x4A002134 */ - u32 pad1[794]; /* 0x4A002138 */ - u32 control_paconf_global; /* 0x4A002DA0 */ - u32 control_paconf_mode; /* 0x4A002DA4 */ - u32 control_smart1io_padconf_0; /* 0x4A002DA8 */ - u32 control_smart1io_padconf_1; /* 0x4A002DAC */ - u32 control_smart1io_padconf_2; /* 0x4A002DB0 */ - u32 control_smart2io_padconf_0; /* 0x4A002DB4 */ - u32 control_smart2io_padconf_1; /* 0x4A002DB8 */ - u32 control_smart2io_padconf_2; /* 0x4A002DBC */ - u32 control_smart3io_padconf_0; /* 0x4A002DC0 */ - u32 control_smart3io_padconf_1; /* 0x4A002DC4 */ - u32 pad2[14]; - u32 control_pbias; /* 0x4A002E00 */ - u32 control_i2c_0; /* 0x4A002E04 */ - u32 control_camera_rx; /* 0x4A002E08 */ - u32 control_hdmi_tx_phy; /* 0x4A002E0C */ - u32 control_uniportm; /* 0x4A002E10 */ - u32 control_dsiphy; /* 0x4A002E14 */ - u32 control_mcbsplp; /* 0x4A002E18 */ - u32 control_usb2phycore; /* 0x4A002E1C */ - u32 control_hdmi_1; /*0x4A002E20*/ - u32 control_hsi; /*0x4A002E24*/ - u32 pad3[2]; - u32 control_ddr3ch1_0; /*0x4A002E30*/ - u32 control_ddr3ch2_0; /*0x4A002E34*/ - u32 control_ddrch1_0; /*0x4A002E38*/ - u32 control_ddrch1_1; /*0x4A002E3C*/ - u32 control_ddrch2_0; /*0x4A002E40*/ - u32 control_ddrch2_1; /*0x4A002E44*/ - u32 control_lpddr2ch1_0; /*0x4A002E48*/ - u32 control_lpddr2ch1_1; /*0x4A002E4C*/ - u32 control_ddrio_0; /*0x4A002E50*/ - u32 control_ddrio_1; /*0x4A002E54*/ - u32 control_ddrio_2; /*0x4A002E58*/ - u32 control_hyst_1; /*0x4A002E5C*/ - u32 control_usbb_hsic_control; /*0x4A002E60*/ - u32 control_c2c; /*0x4A002E64*/ - u32 control_core_control_spare_rw; /*0x4A002E68*/ - u32 control_core_control_spare_r; /*0x4A002E6C*/ - u32 control_core_control_spare_r_c0; /*0x4A002E70*/ - u32 control_srcomp_north_side; /*0x4A002E74*/ - u32 control_srcomp_south_side; /*0x4A002E78*/ - u32 control_srcomp_east_side; /*0x4A002E7C*/ - u32 control_srcomp_west_side; /*0x4A002E80*/ - u32 control_srcomp_code_latch; /*0x4A002E84*/ - u32 pad4[3679394]; - u32 control_port_emif1_sdram_config; /*0x4AE0C110*/ - u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/ - u32 control_port_emif2_sdram_config; /*0x4AE0C118*/ - u32 pad5[10]; - u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */ - u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */ - u32 pad6[789]; - u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */ - u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */ - u32 control_padconf_mode; /* 0x4AE0CDA8 */ - u32 control_xtal_oscillator; /* 0x4AE0CDAC */ - u32 control_i2c_2; /* 0x4AE0CDB0 */ - u32 control_ckobuffer; /* 0x4AE0CDB4 */ - u32 control_wkup_control_spare_rw; /* 0x4AE0CDB8 */ - u32 control_wkup_control_spare_r; /* 0x4AE0CDBC */ - u32 control_wkup_control_spare_r_c0; /* 0x4AE0CDC0 */ - u32 control_srcomp_east_side_wkup; /* 0x4AE0CDC4 */ - u32 control_efuse_1; /* 0x4AE0CDC8 */ - u32 control_efuse_2; /* 0x4AE0CDCC */ - u32 control_efuse_3; /* 0x4AE0CDD0 */ - u32 control_efuse_4; /* 0x4AE0CDD4 */ - u32 control_efuse_5; /* 0x4AE0CDD8 */ - u32 control_efuse_6; /* 0x4AE0CDDC */ - u32 control_efuse_7; /* 0x4AE0CDE0 */ - u32 control_efuse_8; /* 0x4AE0CDE4 */ - u32 control_efuse_9; /* 0x4AE0CDE8 */ - u32 control_efuse_10; /* 0x4AE0CDEC */ - u32 control_efuse_11; /* 0x4AE0CDF0 */ - u32 control_efuse_12; /* 0x4AE0CDF4 */ - u32 control_efuse_13; /* 0x4AE0CDF8 */ -}; - /* Output impedance control */ #define ds_120_ohm 0x0 #define ds_60_ohm 0x1 @@ -247,6 +169,12 @@ struct omap_sys_ctrl_regs { #define DDR_IO_1_VREF_CELLS_DDR3_VALUE 0xBC6318DC #define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0 +#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C +#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64656465 +#define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631 +#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xB46318D8 +#define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000 + #define EFUSE_1 0x45145100 #define EFUSE_2 0x45145100 #define EFUSE_3 0x45145100 @@ -271,7 +199,11 @@ struct omap_sys_ctrl_regs { #define OMAP5_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) #define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) -#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) +#define OMAP5_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) +#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24) /* Silicon revisions */ #define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF @@ -298,7 +230,26 @@ struct omap_sys_ctrl_regs { #define CH_FLAGS_CHFLASH (0x1 << 2) #define CH_FLAGS_CHMMCSD (0x1 << 3) +/* CONTROL_SRCOMP_XXX_SIDE */ +#define OVERRIDE_XS_SHIFT 30 +#define OVERRIDE_XS_MASK (1 << 30) +#define SRCODE_READ_XS_SHIFT 12 +#define SRCODE_READ_XS_MASK (0xff << 12) +#define PWRDWN_XS_SHIFT 11 +#define PWRDWN_XS_MASK (1 << 11) +#define DIVIDE_FACTOR_XS_SHIFT 4 +#define DIVIDE_FACTOR_XS_MASK (0x7f << 4) +#define MULTIPLY_FACTOR_XS_SHIFT 1 +#define MULTIPLY_FACTOR_XS_MASK (0x7 << 1) +#define SRCODE_OVERRIDE_SEL_XS_SHIFT 0 +#define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0) + #ifndef __ASSEMBLY__ +struct srcomp_params { + s8 divide_factor; + s8 multiply_factor; +}; + struct omap_boot_parameters { char *boot_message; unsigned int mem_boot_descriptor; @@ -306,5 +257,15 @@ struct omap_boot_parameters { unsigned char reset_reason; unsigned char ch_flags; }; + +struct ctrl_ioregs { + u32 ctrl_ddrch; + u32 ctrl_lpddr2ch; + u32 ctrl_ddr3ch; + u32 ctrl_ddrio_0; + u32 ctrl_ddrio_1; + u32 ctrl_ddrio_2; + u32 ctrl_emif_sdram_config_ext; +}; #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index d125c61..323cd63 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 72e9df7..e66ab44 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -25,9 +25,13 @@ #include <asm/io.h> #include <asm/arch/clocks.h> #include <asm/omap_common.h> -#include <asm/arch/mux_omap5.h> #include <asm/arch/clocks.h> +struct pad_conf_entry { + u32 offset; + u32 val; +}; + struct omap_sysinfo { char *board_string; }; @@ -44,7 +48,7 @@ u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); void setup_clocks_for_console(void); void prcm_init(void); -void bypass_dpll(u32 *const base); +void bypass_dpll(u32 const base); void freq_update_core(void); u32 get_sys_clk_freq(void); u32 omap5_ddr_clk(void); @@ -58,6 +62,8 @@ void omap_vc_init(u16 speed_khz); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); +void get_ioregs(const struct ctrl_ioregs **regs); +void srcomp_enable(void); /* * This is used to verify if the configuration header diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h new file mode 100644 index 0000000..d0c69da --- /dev/null +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -0,0 +1,85 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_ARCH_HARDWARE_H +#define _ASM_ARCH_HARDWARE_H + +#define XPSS_SYS_CTRL_BASEADDR 0xF8000000 +#define XPSS_DEV_CFG_APB_BASEADDR 0xF8007000 +#define XPSS_SCU_BASEADDR 0xF8F00000 + +/* Reflect slcr offsets */ +struct slcr_regs { + u32 scl; /* 0x0 */ + u32 slcr_lock; /* 0x4 */ + u32 slcr_unlock; /* 0x8 */ + u32 reserved1[125]; + u32 pss_rst_ctrl; /* 0x200 */ + u32 reserved2[15]; + u32 fpga_rst_ctrl; /* 0x240 */ + u32 reserved3[5]; + u32 reboot_status; /* 0x258 */ + u32 boot_mode; /* 0x25c */ + u32 reserved4[116]; + u32 trust_zone; /* 0x430 */ /* FIXME */ + u32 reserved5[115]; + u32 ddr_urgent; /* 0x600 */ + u32 reserved6[6]; + u32 ddr_urgent_sel; /* 0x61c */ + u32 reserved7[188]; + u32 ocm_cfg; /* 0x910 */ +}; + +#define slcr_base ((struct slcr_regs *) XPSS_SYS_CTRL_BASEADDR) + +struct devcfg_regs { + u32 ctrl; /* 0x0 */ + u32 lock; /* 0x4 */ + u32 cfg; /* 0x8 */ + u32 int_sts; /* 0xc */ + u32 int_mask; /* 0x10 */ + u32 status; /* 0x14 */ + u32 dma_src_addr; /* 0x18 */ + u32 dma_dst_addr; /* 0x1c */ + u32 dma_src_len; /* 0x20 */ + u32 dma_dst_len; /* 0x24 */ + u32 rom_shadow; /* 0x28 */ + u32 reserved1[2]; + u32 unlock; /* 0x34 */ + u32 reserved2[18]; + u32 mctrl; /* 0x80 */ + u32 reserved3; + u32 write_count; /* 0x88 */ + u32 read_count; /* 0x8c */ +}; + +#define devcfg_base ((struct devcfg_regs *) XPSS_DEV_CFG_APB_BASEADDR) + +struct scu_regs { + u32 reserved1[16]; + u32 filter_start; /* 0x40 */ + u32 filter_end; /* 0x44 */ +}; + +#define scu_base ((struct scu_regs *) XPSS_SCU_BASEADDR) + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h new file mode 100644 index 0000000..e788900 --- /dev/null +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +extern void zynq_slcr_lock(void); +extern void zynq_slcr_unlock(void); +extern void zynq_slcr_cpu_reset(void); + +#endif /* _SYS_PROTO_H_ */ diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h index ad9a875..a73630b 100644 --- a/arch/arm/include/asm/armv7.h +++ b/arch/arm/include/asm/armv7.h @@ -33,6 +33,7 @@ /* Cortex-A15 revisions */ #define MIDR_CORTEX_A15_R0P0 0x410FC0F0 +#define MIDR_CORTEX_A15_R2P2 0x412FC0F2 /* CCSIDR */ #define CCSIDR_LINE_SIZE_OFFSET 0 diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index ed251ec..c5d1e6c 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -519,6 +519,7 @@ #define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES 0x0000C1A7 #define SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES 0x000001A7 +#define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES_ES2 0x0000C1C7 /* DMM */ #define DMM_BASE 0x4E000040 @@ -696,11 +697,9 @@ struct dmm_lisa_map_regs { u32 dmm_lisa_map_1; u32 dmm_lisa_map_2; u32 dmm_lisa_map_3; + u8 is_ma_present; }; -extern const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; -extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; - #define CS0 0 #define CS1 1 /* The maximum frequency at which the LPDDR2 interface can operate in Hz*/ @@ -1027,6 +1026,11 @@ extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; #define MR8_IO_WIDTH_SHIFT 0x6 #define MR8_IO_WIDTH_MASK (0x3 << 0x6) +/* SDRAM TYPE */ +#define EMIF_SDRAM_TYPE_DDR2 0x2 +#define EMIF_SDRAM_TYPE_DDR3 0x3 +#define EMIF_SDRAM_TYPE_LPDDR2 0x4 + struct lpddr2_addressing { u8 num_banks; u8 t_REFI_us_x10; @@ -1129,6 +1133,14 @@ struct emif_regs { u32 emif_rd_wr_exec_thresh; }; +struct lpddr2_mr_regs { + s8 mr1; + s8 mr2; + s8 mr3; + s8 mr10; + s8 mr16; +}; + /* assert macros */ #if defined(DEBUG) #define emif_assert(c) ({ if (!(c)) for (;;); }) @@ -1148,6 +1160,7 @@ void emif_get_device_timings(u32 emif_nr, #endif void do_ext_phy_settings(u32 base, const struct emif_regs *regs); +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs); #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS extern u32 *const T_num; @@ -1156,4 +1169,5 @@ extern u32 *const emif_sizes; #endif void config_data_eye_leveling_samples(u32 emif_base); +u32 emif_sdram_type(void); #endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 2a40b89..091ddb5 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -25,6 +25,524 @@ #ifndef _OMAP_COMMON_H_ #define _OMAP_COMMON_H_ +#include <common.h> + +#define NUM_SYS_CLKS 8 + +struct prcm_regs { + /* cm1.ckgen */ + u32 cm_clksel_core; + u32 cm_clksel_abe; + u32 cm_dll_ctrl; + u32 cm_clkmode_dpll_core; + u32 cm_idlest_dpll_core; + u32 cm_autoidle_dpll_core; + u32 cm_clksel_dpll_core; + u32 cm_div_m2_dpll_core; + u32 cm_div_m3_dpll_core; + u32 cm_div_h11_dpll_core; + u32 cm_div_h12_dpll_core; + u32 cm_div_h13_dpll_core; + u32 cm_div_h14_dpll_core; + u32 cm_div_h21_dpll_core; + u32 cm_div_h24_dpll_core; + u32 cm_ssc_deltamstep_dpll_core; + u32 cm_ssc_modfreqdiv_dpll_core; + u32 cm_emu_override_dpll_core; + u32 cm_div_h22_dpllcore; + u32 cm_div_h23_dpll_core; + u32 cm_clkmode_dpll_mpu; + u32 cm_idlest_dpll_mpu; + u32 cm_autoidle_dpll_mpu; + u32 cm_clksel_dpll_mpu; + u32 cm_div_m2_dpll_mpu; + u32 cm_ssc_deltamstep_dpll_mpu; + u32 cm_ssc_modfreqdiv_dpll_mpu; + u32 cm_bypclk_dpll_mpu; + u32 cm_clkmode_dpll_iva; + u32 cm_idlest_dpll_iva; + u32 cm_autoidle_dpll_iva; + u32 cm_clksel_dpll_iva; + u32 cm_div_h11_dpll_iva; + u32 cm_div_h12_dpll_iva; + u32 cm_ssc_deltamstep_dpll_iva; + u32 cm_ssc_modfreqdiv_dpll_iva; + u32 cm_bypclk_dpll_iva; + u32 cm_clkmode_dpll_abe; + u32 cm_idlest_dpll_abe; + u32 cm_autoidle_dpll_abe; + u32 cm_clksel_dpll_abe; + u32 cm_div_m2_dpll_abe; + u32 cm_div_m3_dpll_abe; + u32 cm_ssc_deltamstep_dpll_abe; + u32 cm_ssc_modfreqdiv_dpll_abe; + u32 cm_clkmode_dpll_ddrphy; + u32 cm_idlest_dpll_ddrphy; + u32 cm_autoidle_dpll_ddrphy; + u32 cm_clksel_dpll_ddrphy; + u32 cm_div_m2_dpll_ddrphy; + u32 cm_div_h11_dpll_ddrphy; + u32 cm_div_h12_dpll_ddrphy; + u32 cm_div_h13_dpll_ddrphy; + u32 cm_ssc_deltamstep_dpll_ddrphy; + u32 cm_clkmode_dpll_dsp; + u32 cm_shadow_freq_config1; + u32 cm_mpu_mpu_clkctrl; + + /* cm1.dsp */ + u32 cm_dsp_clkstctrl; + u32 cm_dsp_dsp_clkctrl; + + /* cm1.abe */ + u32 cm1_abe_clkstctrl; + u32 cm1_abe_l4abe_clkctrl; + u32 cm1_abe_aess_clkctrl; + u32 cm1_abe_pdm_clkctrl; + u32 cm1_abe_dmic_clkctrl; + u32 cm1_abe_mcasp_clkctrl; + u32 cm1_abe_mcbsp1_clkctrl; + u32 cm1_abe_mcbsp2_clkctrl; + u32 cm1_abe_mcbsp3_clkctrl; + u32 cm1_abe_slimbus_clkctrl; + u32 cm1_abe_timer5_clkctrl; + u32 cm1_abe_timer6_clkctrl; + u32 cm1_abe_timer7_clkctrl; + u32 cm1_abe_timer8_clkctrl; + u32 cm1_abe_wdt3_clkctrl; + + /* cm2.ckgen */ + u32 cm_clksel_mpu_m3_iss_root; + u32 cm_clksel_usb_60mhz; + u32 cm_scale_fclk; + u32 cm_core_dvfs_perf1; + u32 cm_core_dvfs_perf2; + u32 cm_core_dvfs_perf3; + u32 cm_core_dvfs_perf4; + u32 cm_core_dvfs_current; + u32 cm_iva_dvfs_perf_tesla; + u32 cm_iva_dvfs_perf_ivahd; + u32 cm_iva_dvfs_perf_abe; + u32 cm_iva_dvfs_current; + u32 cm_clkmode_dpll_per; + u32 cm_idlest_dpll_per; + u32 cm_autoidle_dpll_per; + u32 cm_clksel_dpll_per; + u32 cm_div_m2_dpll_per; + u32 cm_div_m3_dpll_per; + u32 cm_div_h11_dpll_per; + u32 cm_div_h12_dpll_per; + u32 cm_div_h13_dpll_per; + u32 cm_div_h14_dpll_per; + u32 cm_ssc_deltamstep_dpll_per; + u32 cm_ssc_modfreqdiv_dpll_per; + u32 cm_emu_override_dpll_per; + u32 cm_clkmode_dpll_usb; + u32 cm_idlest_dpll_usb; + u32 cm_autoidle_dpll_usb; + u32 cm_clksel_dpll_usb; + u32 cm_div_m2_dpll_usb; + u32 cm_ssc_deltamstep_dpll_usb; + u32 cm_ssc_modfreqdiv_dpll_usb; + u32 cm_clkdcoldo_dpll_usb; + u32 cm_clkmode_dpll_pcie_ref; + u32 cm_clkmode_apll_pcie; + u32 cm_idlest_apll_pcie; + u32 cm_div_m2_apll_pcie; + u32 cm_clkvcoldo_apll_pcie; + u32 cm_clkmode_dpll_unipro; + u32 cm_idlest_dpll_unipro; + u32 cm_autoidle_dpll_unipro; + u32 cm_clksel_dpll_unipro; + u32 cm_div_m2_dpll_unipro; + u32 cm_ssc_deltamstep_dpll_unipro; + u32 cm_ssc_modfreqdiv_dpll_unipro; + + /* cm2.core */ + u32 cm_coreaon_bandgap_clkctrl; + u32 cm_coreaon_io_srcomp_clkctrl; + u32 cm_l3_1_clkstctrl; + u32 cm_l3_1_dynamicdep; + u32 cm_l3_1_l3_1_clkctrl; + u32 cm_l3_2_clkstctrl; + u32 cm_l3_2_dynamicdep; + u32 cm_l3_2_l3_2_clkctrl; + u32 cm_l3_gpmc_clkctrl; + u32 cm_l3_2_ocmc_ram_clkctrl; + u32 cm_mpu_m3_clkstctrl; + u32 cm_mpu_m3_staticdep; + u32 cm_mpu_m3_dynamicdep; + u32 cm_mpu_m3_mpu_m3_clkctrl; + u32 cm_sdma_clkstctrl; + u32 cm_sdma_staticdep; + u32 cm_sdma_dynamicdep; + u32 cm_sdma_sdma_clkctrl; + u32 cm_memif_clkstctrl; + u32 cm_memif_dmm_clkctrl; + u32 cm_memif_emif_fw_clkctrl; + u32 cm_memif_emif_1_clkctrl; + u32 cm_memif_emif_2_clkctrl; + u32 cm_memif_dll_clkctrl; + u32 cm_memif_emif_h1_clkctrl; + u32 cm_memif_emif_h2_clkctrl; + u32 cm_memif_dll_h_clkctrl; + u32 cm_c2c_clkstctrl; + u32 cm_c2c_staticdep; + u32 cm_c2c_dynamicdep; + u32 cm_c2c_sad2d_clkctrl; + u32 cm_c2c_modem_icr_clkctrl; + u32 cm_c2c_sad2d_fw_clkctrl; + u32 cm_l4cfg_clkstctrl; + u32 cm_l4cfg_dynamicdep; + u32 cm_l4cfg_l4_cfg_clkctrl; + u32 cm_l4cfg_hw_sem_clkctrl; + u32 cm_l4cfg_mailbox_clkctrl; + u32 cm_l4cfg_sar_rom_clkctrl; + u32 cm_l3instr_clkstctrl; + u32 cm_l3instr_l3_3_clkctrl; + u32 cm_l3instr_l3_instr_clkctrl; + u32 cm_l3instr_intrconn_wp1_clkctrl; + + /* cm2.ivahd */ + u32 cm_ivahd_clkstctrl; + u32 cm_ivahd_ivahd_clkctrl; + u32 cm_ivahd_sl2_clkctrl; + + /* cm2.cam */ + u32 cm_cam_clkstctrl; + u32 cm_cam_iss_clkctrl; + u32 cm_cam_fdif_clkctrl; + u32 cm_cam_vip1_clkctrl; + u32 cm_cam_vip2_clkctrl; + u32 cm_cam_vip3_clkctrl; + u32 cm_cam_lvdsrx_clkctrl; + u32 cm_cam_csi1_clkctrl; + u32 cm_cam_csi2_clkctrl; + + /* cm2.dss */ + u32 cm_dss_clkstctrl; + u32 cm_dss_dss_clkctrl; + + /* cm2.sgx */ + u32 cm_sgx_clkstctrl; + u32 cm_sgx_sgx_clkctrl; + + /* cm2.l3init */ + u32 cm_l3init_clkstctrl; + + /* cm2.l3init */ + u32 cm_l3init_hsmmc1_clkctrl; + u32 cm_l3init_hsmmc2_clkctrl; + u32 cm_l3init_hsi_clkctrl; + u32 cm_l3init_hsusbhost_clkctrl; + u32 cm_l3init_hsusbotg_clkctrl; + u32 cm_l3init_hsusbtll_clkctrl; + u32 cm_l3init_p1500_clkctrl; + u32 cm_l3init_fsusb_clkctrl; + u32 cm_l3init_ocp2scp1_clkctrl; + + /* cm2.l4per */ + u32 cm_l4per_clkstctrl; + u32 cm_l4per_dynamicdep; + u32 cm_l4per_adc_clkctrl; + u32 cm_l4per_gptimer10_clkctrl; + u32 cm_l4per_gptimer11_clkctrl; + u32 cm_l4per_gptimer2_clkctrl; + u32 cm_l4per_gptimer3_clkctrl; + u32 cm_l4per_gptimer4_clkctrl; + u32 cm_l4per_gptimer9_clkctrl; + u32 cm_l4per_elm_clkctrl; + u32 cm_l4per_gpio2_clkctrl; + u32 cm_l4per_gpio3_clkctrl; + u32 cm_l4per_gpio4_clkctrl; + u32 cm_l4per_gpio5_clkctrl; + u32 cm_l4per_gpio6_clkctrl; + u32 cm_l4per_hdq1w_clkctrl; + u32 cm_l4per_hecc1_clkctrl; + u32 cm_l4per_hecc2_clkctrl; + u32 cm_l4per_i2c1_clkctrl; + u32 cm_l4per_i2c2_clkctrl; + u32 cm_l4per_i2c3_clkctrl; + u32 cm_l4per_i2c4_clkctrl; + u32 cm_l4per_l4per_clkctrl; + u32 cm_l4per_mcasp2_clkctrl; + u32 cm_l4per_mcasp3_clkctrl; + u32 cm_l4per_mgate_clkctrl; + u32 cm_l4per_mcspi1_clkctrl; + u32 cm_l4per_mcspi2_clkctrl; + u32 cm_l4per_mcspi3_clkctrl; + u32 cm_l4per_mcspi4_clkctrl; + u32 cm_l4per_gpio7_clkctrl; + u32 cm_l4per_gpio8_clkctrl; + u32 cm_l4per_mmcsd3_clkctrl; + u32 cm_l4per_mmcsd4_clkctrl; + u32 cm_l4per_msprohg_clkctrl; + u32 cm_l4per_slimbus2_clkctrl; + u32 cm_l4per_uart1_clkctrl; + u32 cm_l4per_uart2_clkctrl; + u32 cm_l4per_uart3_clkctrl; + u32 cm_l4per_uart4_clkctrl; + u32 cm_l4per_mmcsd5_clkctrl; + u32 cm_l4per_i2c5_clkctrl; + u32 cm_l4per_uart5_clkctrl; + u32 cm_l4per_uart6_clkctrl; + u32 cm_l4sec_clkstctrl; + u32 cm_l4sec_staticdep; + u32 cm_l4sec_dynamicdep; + u32 cm_l4sec_aes1_clkctrl; + u32 cm_l4sec_aes2_clkctrl; + u32 cm_l4sec_des3des_clkctrl; + u32 cm_l4sec_pkaeip29_clkctrl; + u32 cm_l4sec_rng_clkctrl; + u32 cm_l4sec_sha2md51_clkctrl; + u32 cm_l4sec_cryptodma_clkctrl; + + /* l4 wkup regs */ + u32 cm_abe_pll_ref_clksel; + u32 cm_sys_clksel; + u32 cm_wkup_clkstctrl; + u32 cm_wkup_l4wkup_clkctrl; + u32 cm_wkup_wdtimer1_clkctrl; + u32 cm_wkup_wdtimer2_clkctrl; + u32 cm_wkup_gpio1_clkctrl; + u32 cm_wkup_gptimer1_clkctrl; + u32 cm_wkup_gptimer12_clkctrl; + u32 cm_wkup_synctimer_clkctrl; + u32 cm_wkup_usim_clkctrl; + u32 cm_wkup_sarram_clkctrl; + u32 cm_wkup_keyboard_clkctrl; + u32 cm_wkup_rtc_clkctrl; + u32 cm_wkup_bandgap_clkctrl; + u32 cm_wkupaon_scrm_clkctrl; + u32 cm_wkupaon_io_srcomp_clkctrl; + u32 prm_rstctrl; + u32 prm_rstst; + u32 prm_vc_val_bypass; + u32 prm_vc_cfg_i2c_mode; + u32 prm_vc_cfg_i2c_clk; + u32 prm_sldo_core_setup; + u32 prm_sldo_core_ctrl; + u32 prm_sldo_mpu_setup; + u32 prm_sldo_mpu_ctrl; + u32 prm_sldo_mm_setup; + u32 prm_sldo_mm_ctrl; + + u32 cm_div_m4_dpll_core; + u32 cm_div_m5_dpll_core; + u32 cm_div_m6_dpll_core; + u32 cm_div_m7_dpll_core; + u32 cm_div_m4_dpll_iva; + u32 cm_div_m5_dpll_iva; + u32 cm_div_m4_dpll_ddrphy; + u32 cm_div_m5_dpll_ddrphy; + u32 cm_div_m6_dpll_ddrphy; + u32 cm_div_m4_dpll_per; + u32 cm_div_m5_dpll_per; + u32 cm_div_m6_dpll_per; + u32 cm_div_m7_dpll_per; + u32 cm_l3instr_intrconn_wp1_clkct; + u32 cm_l3init_usbphy_clkctrl; + u32 cm_l4per_mcbsp4_clkctrl; + u32 prm_vc_cfg_channel; +}; + +struct omap_sys_ctrl_regs { + u32 control_status; + u32 control_core_mmr_lock1; + u32 control_core_mmr_lock2; + u32 control_core_mmr_lock3; + u32 control_core_mmr_lock4; + u32 control_core_mmr_lock5; + u32 control_core_control_io1; + u32 control_core_control_io2; + u32 control_id_code; + u32 control_std_fuse_opp_bgap; + u32 control_ldosram_iva_voltage_ctrl; + u32 control_ldosram_mpu_voltage_ctrl; + u32 control_ldosram_core_voltage_ctrl; + u32 control_padconf_core_base; + u32 control_paconf_global; + u32 control_paconf_mode; + u32 control_smart1io_padconf_0; + u32 control_smart1io_padconf_1; + u32 control_smart1io_padconf_2; + u32 control_smart2io_padconf_0; + u32 control_smart2io_padconf_1; + u32 control_smart2io_padconf_2; + u32 control_smart3io_padconf_0; + u32 control_smart3io_padconf_1; + u32 control_pbias; + u32 control_i2c_0; + u32 control_camera_rx; + u32 control_hdmi_tx_phy; + u32 control_uniportm; + u32 control_dsiphy; + u32 control_mcbsplp; + u32 control_usb2phycore; + u32 control_hdmi_1; + u32 control_hsi; + u32 control_ddr3ch1_0; + u32 control_ddr3ch2_0; + u32 control_ddrch1_0; + u32 control_ddrch1_1; + u32 control_ddrch2_0; + u32 control_ddrch2_1; + u32 control_lpddr2ch1_0; + u32 control_lpddr2ch1_1; + u32 control_ddrio_0; + u32 control_ddrio_1; + u32 control_ddrio_2; + u32 control_lpddr2io1_0; + u32 control_lpddr2io1_1; + u32 control_lpddr2io1_2; + u32 control_lpddr2io1_3; + u32 control_lpddr2io2_0; + u32 control_lpddr2io2_1; + u32 control_lpddr2io2_2; + u32 control_lpddr2io2_3; + u32 control_hyst_1; + u32 control_usbb_hsic_control; + u32 control_c2c; + u32 control_core_control_spare_rw; + u32 control_core_control_spare_r; + u32 control_core_control_spare_r_c0; + u32 control_srcomp_north_side; + u32 control_srcomp_south_side; + u32 control_srcomp_east_side; + u32 control_srcomp_west_side; + u32 control_srcomp_code_latch; + u32 control_pbiaslite; + u32 control_port_emif1_sdram_config; + u32 control_port_emif1_lpddr2_nvm_config; + u32 control_port_emif2_sdram_config; + u32 control_emif1_sdram_config_ext; + u32 control_emif2_sdram_config_ext; + u32 control_smart1nopmio_padconf_0; + u32 control_smart1nopmio_padconf_1; + u32 control_padconf_mode; + u32 control_xtal_oscillator; + u32 control_i2c_2; + u32 control_ckobuffer; + u32 control_wkup_control_spare_rw; + u32 control_wkup_control_spare_r; + u32 control_wkup_control_spare_r_c0; + u32 control_srcomp_east_side_wkup; + u32 control_efuse_1; + u32 control_efuse_2; + u32 control_efuse_3; + u32 control_efuse_4; + u32 control_efuse_5; + u32 control_efuse_6; + u32 control_efuse_7; + u32 control_efuse_8; + u32 control_efuse_9; + u32 control_efuse_10; + u32 control_efuse_11; + u32 control_efuse_12; + u32 control_efuse_13; + u32 control_padconf_wkup_base; +}; + +struct dpll_params { + u32 m; + u32 n; + s8 m2; + s8 m3; + s8 m4_h11; + s8 m5_h12; + s8 m6_h13; + s8 m7_h14; + s8 h21; + s8 h22; + s8 h23; + s8 h24; +}; + +struct dpll_regs { + u32 cm_clkmode_dpll; + u32 cm_idlest_dpll; + u32 cm_autoidle_dpll; + u32 cm_clksel_dpll; + u32 cm_div_m2_dpll; + u32 cm_div_m3_dpll; + u32 cm_div_m4_h11_dpll; + u32 cm_div_m5_h12_dpll; + u32 cm_div_m6_h13_dpll; + u32 cm_div_m7_h14_dpll; + u32 reserved[2]; + u32 cm_div_h21_dpll; + u32 cm_div_h22_dpll; + u32 cm_div_h23_dpll; + u32 cm_div_h24_dpll; +}; + +struct dplls { + const struct dpll_params *mpu; + const struct dpll_params *core; + const struct dpll_params *per; + const struct dpll_params *abe; + const struct dpll_params *iva; + const struct dpll_params *usb; + const struct dpll_params *ddr; +}; + +struct pmic_data { + u32 base_offset; + u32 step; + u32 start_code; + unsigned gpio; + int gpio_en; +}; + +struct volts { + u32 value; + u32 addr; + struct pmic_data *pmic; +}; + +struct vcores_data { + struct volts mpu; + struct volts core; + struct volts mm; +}; + +extern struct prcm_regs const **prcm; +extern struct prcm_regs const omap5_es1_prcm; +extern struct prcm_regs const omap5_es2_prcm; +extern struct prcm_regs const omap4_prcm; +extern struct prcm_regs const dra7xx_prcm; +extern struct dplls const **dplls_data; +extern struct vcores_data const **omap_vcores; +extern const u32 sys_clk_array[8]; +extern struct omap_sys_ctrl_regs const **ctrl; +extern struct omap_sys_ctrl_regs const omap4_ctrl; +extern struct omap_sys_ctrl_regs const omap5_ctrl; +extern struct omap_sys_ctrl_regs const dra7xx_ctrl; + +void hw_data_init(void); + +const struct dpll_params *get_mpu_dpll_params(struct dplls const *); +const struct dpll_params *get_core_dpll_params(struct dplls const *); +const struct dpll_params *get_per_dpll_params(struct dplls const *); +const struct dpll_params *get_iva_dpll_params(struct dplls const *); +const struct dpll_params *get_usb_dpll_params(struct dplls const *); +const struct dpll_params *get_abe_dpll_params(struct dplls const *); + +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, + u8 wait_for_enable); + +void setup_post_dividers(u32 const base, + const struct dpll_params *params); +u32 omap_ddr_clk(void); +u32 get_sys_clk_index(void); +void enable_basic_clocks(void); +void enable_basic_uboot_clocks(void); +void enable_non_essential_clocks(void); +void scale_vcores(struct vcores_data const *); +u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); +void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); + /* Max value for DPLL multiplier M */ #define OMAP_DPLL_MAX_N 127 @@ -60,4 +578,9 @@ static inline u32 omap_revision(void) #define OMAP5430_SILICON_ID_INVALID 0 #define OMAP5430_ES1_0 0x54300100 #define OMAP5432_ES1_0 0x54320100 +#define OMAP5430_ES2_0 0x54300200 +#define OMAP5432_ES2_0 0x54320200 + +/* DRA7XX */ +#define DRA752_ES1_0 0x07520100 #endif /* _OMAP_COMMON_H_ */ diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h new file mode 100644 index 0000000..617e22f --- /dev/null +++ b/arch/arm/include/asm/omap_mmc.h @@ -0,0 +1,168 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef OMAP_MMC_H_ +#define OMAP_MMC_H_ + +struct hsmmc { + unsigned char res1[0x10]; + unsigned int sysconfig; /* 0x10 */ + unsigned int sysstatus; /* 0x14 */ + unsigned char res2[0x14]; + unsigned int con; /* 0x2C */ + unsigned char res3[0xD4]; + unsigned int blk; /* 0x104 */ + unsigned int arg; /* 0x108 */ + unsigned int cmd; /* 0x10C */ + unsigned int rsp10; /* 0x110 */ + unsigned int rsp32; /* 0x114 */ + unsigned int rsp54; /* 0x118 */ + unsigned int rsp76; /* 0x11C */ + unsigned int data; /* 0x120 */ + unsigned int pstate; /* 0x124 */ + unsigned int hctl; /* 0x128 */ + unsigned int sysctl; /* 0x12C */ + unsigned int stat; /* 0x130 */ + unsigned int ie; /* 0x134 */ + unsigned char res4[0x8]; + unsigned int capa; /* 0x140 */ +}; + +/* + * OMAP HS MMC Bit definitions + */ +#define MMC_SOFTRESET (0x1 << 1) +#define RESETDONE (0x1 << 0) +#define NOOPENDRAIN (0x0 << 0) +#define OPENDRAIN (0x1 << 0) +#define OD (0x1 << 0) +#define INIT_NOINIT (0x0 << 1) +#define INIT_INITSTREAM (0x1 << 1) +#define HR_NOHOSTRESP (0x0 << 2) +#define STR_BLOCK (0x0 << 3) +#define MODE_FUNC (0x0 << 4) +#define DW8_1_4BITMODE (0x0 << 5) +#define MIT_CTO (0x0 << 6) +#define CDP_ACTIVEHIGH (0x0 << 7) +#define WPP_ACTIVEHIGH (0x0 << 8) +#define RESERVED_MASK (0x3 << 9) +#define CTPL_MMC_SD (0x0 << 11) +#define BLEN_512BYTESLEN (0x200 << 0) +#define NBLK_STPCNT (0x0 << 16) +#define DE_DISABLE (0x0 << 0) +#define BCE_DISABLE (0x0 << 1) +#define BCE_ENABLE (0x1 << 1) +#define ACEN_DISABLE (0x0 << 2) +#define DDIR_OFFSET (4) +#define DDIR_MASK (0x1 << 4) +#define DDIR_WRITE (0x0 << 4) +#define DDIR_READ (0x1 << 4) +#define MSBS_SGLEBLK (0x0 << 5) +#define MSBS_MULTIBLK (0x1 << 5) +#define RSP_TYPE_OFFSET (16) +#define RSP_TYPE_MASK (0x3 << 16) +#define RSP_TYPE_NORSP (0x0 << 16) +#define RSP_TYPE_LGHT136 (0x1 << 16) +#define RSP_TYPE_LGHT48 (0x2 << 16) +#define RSP_TYPE_LGHT48B (0x3 << 16) +#define CCCE_NOCHECK (0x0 << 19) +#define CCCE_CHECK (0x1 << 19) +#define CICE_NOCHECK (0x0 << 20) +#define CICE_CHECK (0x1 << 20) +#define DP_OFFSET (21) +#define DP_MASK (0x1 << 21) +#define DP_NO_DATA (0x0 << 21) +#define DP_DATA (0x1 << 21) +#define CMD_TYPE_NORMAL (0x0 << 22) +#define INDEX_OFFSET (24) +#define INDEX_MASK (0x3f << 24) +#define INDEX(i) (i << 24) +#define DATI_MASK (0x1 << 1) +#define CMDI_MASK (0x1 << 0) +#define DTW_1_BITMODE (0x0 << 1) +#define DTW_4_BITMODE (0x1 << 1) +#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ +#define SDBP_PWROFF (0x0 << 8) +#define SDBP_PWRON (0x1 << 8) +#define SDVS_1V8 (0x5 << 9) +#define SDVS_3V0 (0x6 << 9) +#define ICE_MASK (0x1 << 0) +#define ICE_STOP (0x0 << 0) +#define ICS_MASK (0x1 << 1) +#define ICS_NOTREADY (0x0 << 1) +#define ICE_OSCILLATE (0x1 << 0) +#define CEN_MASK (0x1 << 2) +#define CEN_DISABLE (0x0 << 2) +#define CEN_ENABLE (0x1 << 2) +#define CLKD_OFFSET (6) +#define CLKD_MASK (0x3FF << 6) +#define DTO_MASK (0xF << 16) +#define DTO_15THDTO (0xE << 16) +#define SOFTRESETALL (0x1 << 24) +#define CC_MASK (0x1 << 0) +#define TC_MASK (0x1 << 1) +#define BWR_MASK (0x1 << 4) +#define BRR_MASK (0x1 << 5) +#define ERRI_MASK (0x1 << 15) +#define IE_CC (0x01 << 0) +#define IE_TC (0x01 << 1) +#define IE_BWR (0x01 << 4) +#define IE_BRR (0x01 << 5) +#define IE_CTO (0x01 << 16) +#define IE_CCRC (0x01 << 17) +#define IE_CEB (0x01 << 18) +#define IE_CIE (0x01 << 19) +#define IE_DTO (0x01 << 20) +#define IE_DCRC (0x01 << 21) +#define IE_DEB (0x01 << 22) +#define IE_CERR (0x01 << 28) +#define IE_BADA (0x01 << 29) + +#define VS30_3V0SUP (1 << 25) +#define VS18_1V8SUP (1 << 26) + +/* Driver definitions */ +#define MMCSD_SECTOR_SIZE 512 +#define MMC_CARD 0 +#define SD_CARD 1 +#define BYTE_MODE 0 +#define SECTOR_MODE 1 +#define CLK_INITSEQ 0 +#define CLK_400KHZ 1 +#define CLK_MISC 2 + +#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) +#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) + +/* Clock Configurations and Macros */ +#define MMC_CLOCK_REFERENCE 96 /* MHz */ + +#define mmc_reg_out(addr, mask, val)\ + writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) + +int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, + int wp_gpio); + + +#endif /* OMAP_MMC_H_ */ diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile index 894fa09..bde56e6 100644 --- a/board/cm_t35/Makefile +++ b/board/cm_t35/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o +COBJS-$(CONFIG_LCD) += display.o COBJS := cm_t35.o leds.o $(COBJS-y) diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index edbb941..e0e8235 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -33,6 +33,7 @@ #include <net.h> #include <i2c.h> #include <usb.h> +#include <mmc.h> #include <twl4030.h> #include <linux/compiler.h> @@ -216,6 +217,9 @@ static void cm_t3x_set_common_muxconf(void) /* SB-T35 Ethernet */ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/ + /* DVI enable */ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/ + /* CM-T3x Ethernet */ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/ @@ -377,9 +381,19 @@ void set_muxconf_regs(void) } #ifdef CONFIG_GENERIC_MMC +int board_mmc_getcd(struct mmc *mmc) +{ + u8 val; + + if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, TWL4030_BASEADD_GPIO)) + return -1; + + return !(val & 1); +} + int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, 59); } #endif diff --git a/board/cm_t35/display.c b/board/cm_t35/display.c new file mode 100644 index 0000000..2f78bad --- /dev/null +++ b/board/cm_t35/display.c @@ -0,0 +1,428 @@ +/* + * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Nikita Kiryanov <nikita@compulab.co.il> + * + * Parsing code based on linux/drivers/video/pxafb.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <stdio_dev.h> +#include <asm/arch/dss.h> +#include <lcd.h> +#include <asm/arch-omap3/dss.h> + +DECLARE_GLOBAL_DATA_PTR; + +enum display_type { + NONE, + DVI, + DVI_CUSTOM, +}; + +#define CMAP_ADDR 0x80100000 + +/* + * The frame buffer is allocated before we have the chance to parse user input. + * To make sure enough memory is allocated for all resolutions, we define + * vl_{col | row} to the maximal resolution supported by OMAP3. + */ +vidinfo_t panel_info = { + .vl_col = 1400, + .vl_row = 1050, + .vl_bpix = LCD_BPP, + .cmap = (ushort *)CMAP_ADDR, +}; + +static struct panel_config panel_cfg; +static enum display_type lcd_def; + +/* + * A note on DVI presets; + * U-Boot can convert 8 bit BMP data to 16 bit BMP data, and OMAP DSS can + * convert 16 bit data into 24 bit data. Thus, GFXFORMAT_RGB16 allows us to + * support two BMP types with one setting. + */ +static const struct panel_config preset_dvi_640X480 = { + .lcd_size = PANEL_LCD_SIZE(640, 480), + .timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96), + .timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2), + .divisor = 12 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_800X600 = { + .lcd_size = PANEL_LCD_SIZE(800, 600), + .timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128), + .timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4), + .divisor = 8 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1024X768 = { + .lcd_size = PANEL_LCD_SIZE(1024, 768), + .timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136), + .timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6), + .divisor = 5 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1152X864 = { + .lcd_size = PANEL_LCD_SIZE(1152, 864), + .timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128), + .timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1280X960 = { + .lcd_size = PANEL_LCD_SIZE(1280, 960), + .timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112), + .timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1280X1024 = { + .lcd_size = PANEL_LCD_SIZE(1280, 1024), + .timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112), + .timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +/* + * set_resolution_params() + * + * Due to usage of multiple display related APIs resolution data is located in + * more than one place. This function updates them all. + */ +static void set_resolution_params(int x, int y) +{ + panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y); + panel_info.vl_col = x; + panel_info.vl_row = y; + lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; +} + +static void set_preset(const struct panel_config preset, int x_res, int y_res) +{ + panel_cfg = preset; + set_resolution_params(x_res, y_res); +} + +static enum display_type set_dvi_preset(const struct panel_config preset, + int x_res, int y_res) +{ + set_preset(preset, x_res, y_res); + return DVI; +} + +/* + * parse_mode() - parse the mode parameter of custom lcd settings + * + * @mode: <res_x>x<res_y> + * + * Returns -1 on error, 0 on success. + */ +static int parse_mode(const char *mode) +{ + unsigned int modelen = strlen(mode); + int res_specified = 0; + unsigned int xres = 0, yres = 0; + int yres_specified = 0; + int i; + + for (i = modelen - 1; i >= 0; i--) { + switch (mode[i]) { + case 'x': + if (!yres_specified) { + yres = simple_strtoul(&mode[i + 1], NULL, 0); + yres_specified = 1; + } else { + goto done_parsing; + } + + break; + case '0' ... '9': + break; + default: + goto done_parsing; + } + } + + if (i < 0 && yres_specified) { + xres = simple_strtoul(mode, NULL, 0); + res_specified = 1; + } + +done_parsing: + if (res_specified) { + set_resolution_params(xres, yres); + } else { + printf("LCD: invalid mode: %s\n", mode); + return -1; + } + + return 0; +} + +#define PIXEL_CLK_NUMERATOR (26 * 432 / 39) +/* + * parse_pixclock() - Parse the pixclock parameter of custom lcd settings + * + * @pixclock: the desired pixel clock + * + * Returns -1 on error, 0 on success. + * + * Handling the pixel_clock: + * + * Pixel clock is defined in the OMAP35x TRM as follows: + * pixel_clock = + * (SYS_CLK * 2 * PRCM.CM_CLKSEL2_PLL[18:8]) / + * (DSS.DISPC_DIVISOR[23:16] * DSS.DISPC_DIVISOR[6:0] * + * PRCM.CM_CLKSEL_DSS[4:0] * (PRCM.CM_CLKSEL2_PLL[6:0] + 1)) + * + * In practice, this means that in order to set the + * divisor for the desired pixel clock one needs to + * solve the following equation: + * + * 26 * 432 / (39 * <pixel_clock>) = DSS.DISPC_DIVISOR[6:0] + * + * NOTE: the explicit equation above is reduced. Do not + * try to infer anything from these numbers. + */ +static int parse_pixclock(char *pixclock) +{ + int divisor, pixclock_val; + char *pixclk_start = pixclock; + + pixclock_val = simple_strtoul(pixclock, &pixclock, 10); + divisor = DIV_ROUND_UP(PIXEL_CLK_NUMERATOR, pixclock_val); + /* 0 and 1 are illegal values for PCD */ + if (divisor <= 1) + divisor = 2; + + panel_cfg.divisor = divisor | (1 << 16); + if (pixclock[0] != '\0') { + printf("LCD: invalid value for pixclock:%s\n", pixclk_start); + return -1; + } + + return 0; +} + +/* + * parse_setting() - parse a single setting of custom lcd parameters + * + * @setting: The custom lcd setting <name>:<value> + * + * Returns -1 on failure, 0 on success. + */ +static int parse_setting(char *setting) +{ + int num_val; + char *setting_start = setting; + + if (!strncmp(setting, "mode:", 5)) { + return parse_mode(setting + 5); + } else if (!strncmp(setting, "pixclock:", 9)) { + return parse_pixclock(setting + 9); + } else if (!strncmp(setting, "left:", 5)) { + num_val = simple_strtoul(setting + 5, &setting, 0); + panel_cfg.timing_h |= DSS_HBP(num_val); + } else if (!strncmp(setting, "right:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_h |= DSS_HFP(num_val); + } else if (!strncmp(setting, "upper:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_v |= DSS_VBP(num_val); + } else if (!strncmp(setting, "lower:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_v |= DSS_VFP(num_val); + } else if (!strncmp(setting, "hsynclen:", 9)) { + num_val = simple_strtoul(setting + 9, &setting, 0); + panel_cfg.timing_h |= DSS_HSW(num_val); + } else if (!strncmp(setting, "vsynclen:", 9)) { + num_val = simple_strtoul(setting + 9, &setting, 0); + panel_cfg.timing_v |= DSS_VSW(num_val); + } else if (!strncmp(setting, "hsync:", 6)) { + if (simple_strtoul(setting + 6, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IHS; + else + panel_cfg.pol_freq &= ~DSS_IHS; + } else if (!strncmp(setting, "vsync:", 6)) { + if (simple_strtoul(setting + 6, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IVS; + else + panel_cfg.pol_freq &= ~DSS_IVS; + } else if (!strncmp(setting, "outputen:", 9)) { + if (simple_strtoul(setting + 9, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IEO; + else + panel_cfg.pol_freq &= ~DSS_IEO; + } else if (!strncmp(setting, "pixclockpol:", 12)) { + if (simple_strtoul(setting + 12, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IPC; + else + panel_cfg.pol_freq &= ~DSS_IPC; + } else if (!strncmp(setting, "active", 6)) { + panel_cfg.panel_type = ACTIVE_DISPLAY; + return 0; /* Avoid sanity check below */ + } else if (!strncmp(setting, "passive", 7)) { + panel_cfg.panel_type = PASSIVE_DISPLAY; + return 0; /* Avoid sanity check below */ + } else if (!strncmp(setting, "display:", 8)) { + if (!strncmp(setting + 8, "dvi", 3)) { + lcd_def = DVI_CUSTOM; + return 0; /* Avoid sanity check below */ + } + } else { + printf("LCD: unknown option %s\n", setting_start); + return -1; + } + + if (setting[0] != '\0') { + printf("LCD: invalid value for %s\n", setting_start); + return -1; + } + + return 0; +} + +/* + * env_parse_customlcd() - parse custom lcd params from an environment variable. + * + * @custom_lcd_params: The environment variable containing the lcd params. + * + * Returns -1 on failure, 0 on success. + */ +static int parse_customlcd(char *custom_lcd_params) +{ + char params_cpy[160]; + char *setting; + + strncpy(params_cpy, custom_lcd_params, 160); + setting = strtok(params_cpy, ","); + while (setting) { + if (parse_setting(setting) < 0) + return -1; + + setting = strtok(NULL, ","); + } + + /* Currently we don't support changing this via custom lcd params */ + panel_cfg.data_lines = LCD_INTERFACE_24_BIT; + panel_cfg.gfx_format = GFXFORMAT_RGB16; /* See dvi predefines note */ + + return 0; +} + +/* + * env_parse_displaytype() - parse display type. + * + * Parses the environment variable "displaytype", which contains the + * name of the display type or preset, in which case it applies its + * configurations. + * + * Returns the type of display that was specified. + */ +static enum display_type env_parse_displaytype(char *displaytype) +{ + if (!strncmp(displaytype, "dvi640x480", 10)) + return set_dvi_preset(preset_dvi_640X480, 640, 480); + else if (!strncmp(displaytype, "dvi800x600", 10)) + return set_dvi_preset(preset_dvi_800X600, 800, 600); + else if (!strncmp(displaytype, "dvi1024x768", 11)) + return set_dvi_preset(preset_dvi_1024X768, 1024, 768); + else if (!strncmp(displaytype, "dvi1152x864", 11)) + return set_dvi_preset(preset_dvi_1152X864, 1152, 864); + else if (!strncmp(displaytype, "dvi1280x960", 11)) + return set_dvi_preset(preset_dvi_1280X960, 1280, 960); + else if (!strncmp(displaytype, "dvi1280x1024", 12)) + return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024); + + return NONE; +} + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; +void *lcd_base; +short console_col; +short console_row; +void *lcd_console_address; + +void lcd_ctrl_init(void *lcdbase) +{ + struct prcm *prcm = (struct prcm *)PRCM_BASE; + char *custom_lcd; + char *displaytype = getenv("displaytype"); + + if (displaytype == NULL) + return; + + lcd_def = env_parse_displaytype(displaytype); + /* If we did not recognize the preset, check if it's an env variable */ + if (lcd_def == NONE) { + custom_lcd = getenv(displaytype); + if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0) + return; + } + + panel_cfg.frame_buffer = lcdbase; + omap3_dss_panel_config(&panel_cfg); + /* + * Pixel clock is defined with many divisions and only few + * multiplications of the system clock. Since DSS FCLK divisor is set + * to 16 by default, we need to set it to a smaller value, like 3 + * (chosen via trial and error). + */ + clrsetbits_le32(&prcm->clksel_dss, 0xF, 3); +} + +void lcd_enable(void) +{ + if (lcd_def == DVI || lcd_def == DVI_CUSTOM) { + gpio_direction_output(54, 0); /* Turn on DVI */ + omap3_dss_enable(); + } +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {} diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c index c6c1071..2dca275 100644 --- a/board/comelit/dig297/dig297.c +++ b/board/comelit/dig297/dig297.c @@ -147,8 +147,7 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c index 56fe495..5c02eaf 100644 --- a/board/corscience/tricorder/tricorder.c +++ b/board/corscience/tricorder/tricorder.c @@ -80,7 +80,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !(defined(CONFIG_SPL_BUILD)) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 9fe6408..923461a 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -114,7 +114,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif @@ -130,6 +130,7 @@ static struct panel_config lcd_cfg = { .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, .lcd_size = PANEL_LCD_SIZE(800, 480), + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; int board_video_init(void) diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 49fcf34..2bac916 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -150,8 +150,7 @@ static inline void setup_net_chip(void) {} #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h index ea1e9ac..5ef22ae 100644 --- a/board/isee/igep00x0/igep00x0.h +++ b/board/isee/igep00x0/igep00x0.h @@ -34,10 +34,13 @@ const omap3_sysinfo sysinfo = { DDR_STACKED, #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) - "OMAP3 IGEP v2 board", + "IGEPv2", #endif #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) - "OMAP3 IGEP COM Module", + "IGEP COM MODULE/ELECTRON", +#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) + "IGEP COM PROTON", #endif #if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index 0b3721e..65e1b78 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -135,8 +135,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index 12bcfcb..6e83aa2 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -140,7 +140,7 @@ int board_init(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index 90b6b0f..c79a261 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -92,8 +92,7 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index 8e18019..ad6ae36 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -183,8 +183,7 @@ void set_muxconf_regs (void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c index dacc138..3fcf968 100644 --- a/board/matrix_vision/mvblx/fpga.c +++ b/board/matrix_vision/mvblx/fpga.c @@ -31,6 +31,7 @@ #include <ACEX1K.h> #include <command.h> #include <asm/gpio.h> +#include <linux/byteorder/generic.h> #include "fpga.h" #ifdef FPGA_DEBUG @@ -209,9 +210,20 @@ int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie) { unsigned char *data = (unsigned char *) buf; int i; + int headerlen = len - cyclone2.size; + + if (headerlen < 0) + return FPGA_FAIL; + else if (headerlen == sizeof(uint32_t)) { + const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */ + char fpgavers_str[fpgavers_len]; + snprintf(fpgavers_str, fpgavers_len, "0x%08x", + be32_to_cpup((uint32_t*)data)); + setenv("fpgavers", fpgavers_str); + } fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); - for (i = 0; i < len; i++) + for (i = headerlen; i < len; i++) _write_fpga(data[i]); fpga_debug("-%s\n", __func__); diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c index f68f312..49af384 100644 --- a/board/matrix_vision/mvblx/mvblx.c +++ b/board/matrix_vision/mvblx/mvblx.c @@ -106,8 +106,8 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c index 945a36d..15269c6 100644 --- a/board/matrix_vision/mvblx/sys_eeprom.c +++ b/board/matrix_vision/mvblx/sys_eeprom.c @@ -326,10 +326,28 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +static inline int is_portrait(void) +{ + int i; + unsigned int orient_index = 0; /* idx of char which determines orientation */ + + for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) { + if (e.id[i] == '-') { + orient_index = i+1; + break; + } + } + + return (orient_index && + (e.id[orient_index] >= '5') && (e.id[orient_index] <= '8')); +} + int mac_read_from_eeprom(void) { u32 crc, crc_offset = offsetof(struct eeprom, crc); u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ +#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf" +#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf" if (read_eeprom()) { printf("EEPROM Read failed.\n"); @@ -374,6 +392,12 @@ int mac_read_from_eeprom(void) setenv("serial#", serial_num); } + /* decide which fpga file to load depending on orientation */ + if (is_portrait()) + setenv("fpgafilename", FILENAME_PORTRAIT); + else + setenv("fpgafilename", FILENAME_LANDSCAPE); + /* TODO should I calculate CRC here? */ return 0; } diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index b2fe1c5..48eb65f 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -671,7 +671,7 @@ int rx51_kp_getc(void) */ int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } diff --git a/board/ns9750dev/config.mk b/board/ns9750dev/config.mk deleted file mode 100644 index e5d8702..0000000 --- a/board/ns9750dev/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -####################################################################### -# -# Copyright (C) 2004 by FS Forth-Systeme GmbH. -# Markus Pietrek <mpietrek@fsforth.de> -# -# @TODO -# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000 -# optionally with a ramdisk at 0080'0000 -# -# we load ourself to 0078'0000 -# -# download area is 0060'0000 -# - - -CONFIG_SYS_TEXT_BASE = 0x00780000 diff --git a/board/ns9750dev/flash.c b/board/ns9750dev/flash.c deleted file mode 100644 index 185bc2d..0000000 --- a/board/ns9750dev/flash.c +++ /dev/null @@ -1,474 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <linux/byteorder/swab.h> - -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - - -/* Flash Organization Structure */ -typedef struct OrgDef { - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgIntel_28F256L18T[] = { - {4, 32 * 1024}, /* 4 * 32kBytes sectors */ - {255, 128 * 1024}, /* 255 * 128kBytes sectors */ -}; - - -/*----------------------------------------------------------------------- - * Functions - */ -unsigned long flash_init (void); -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); -void flash_print_info (flash_info_t * info); -void flash_unprotect_sectors (FPWV * addr); -int flash_erase (flash_info_t * info, int s_first, int s_last); -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - OrgDef *pOrgDef; - - pOrgDef = OrgIntel_28F256L18T; - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - if (i > 255) { - info->start[i] = base + (i * 0x8000); - info->protect[i] = 0; - } else { - info->start[i] = base + - (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F256L18T: - printf ("FLASH 28F256L18T\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - switch (value) { - - case (FPW) (INTEL_ID_28F256L18T): - info->flash_id += FLASH_28F256L18T; - info->sector_count = 259; - info->size = 0x02000000; - break; /* => 32 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/* unprotects a sector for write and erase - * on some intel parts, this unprotects the entire chip, but it - * wont hurt to call this additional times per sector... - */ -void flash_unprotect_sectors (FPWV * addr) -{ -#define PD_FINTEL_WSMS_READY_MASK 0x0080 - - *addr = (FPW) 0x00500050; /* clear status register */ - - /* this sends the clear lock bit command */ - *addr = (FPW) 0x00600060; - *addr = (FPW) 0x00D000D0; -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - flash_unprotect_sectors (addr); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - *addr = (FPW) 0x00500050;/* clear status register */ - *addr = (FPW) 0x00200020;/* erase setup */ - *addr = (FPW) 0x00D000D0;/* erase confirm */ - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - /* reset to read mode */ - *addr = (FPW) 0x00FF00FF; - rcode = 1; - break; - } - } - - /* clear status register cmd. */ - *addr = (FPW) 0x00500050; - *addr = (FPW) 0x00FF00FF;/* resest to read mode */ - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int flag; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); - return (2); - } - flash_unprotect_sectors (addr); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/ns9750dev/led.c b/board/ns9750dev/led.c deleted file mode 100644 index b85c869..0000000 --- a/board/ns9750dev/led.c +++ /dev/null @@ -1,46 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: led.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Defines helper functions for toggeling LEDs - * @Usage: - * @References: [1] - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifdef CONFIG_STATUS_LED - -#include <ns9750_bbus.h> - -static inline void __led_init( led_id_t mask, int state ) -{ - XXXX; -} - -static inline void __led_toggle( led_id_t mask ) -{ -} - -static inline void __led_set( led_id_t mask, int state ) -{ -} - -#endif /* CONFIG_STATUS_LED */ diff --git a/board/ns9750dev/lowlevel_init.S b/board/ns9750dev/lowlevel_init.S deleted file mode 100644 index ba5ff81..0000000 --- a/board/ns9750dev/lowlevel_init.S +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Modified for the NS9750 DevBoard by - * (C) Copyright 2004 by FS Forth-Systeme GmbH. - * Markus Pietrek <mpietrek@fsforth.de> - * @References: [1] NS9750 Hardware Reference/December 2003 - * [2] ns9750_a.cmd from MAJIC configuration - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_NS9750DEV) -# ifndef CONFIG_SKIP_LOWLEVEL_INIT -# include <./ns9750_sys.h> -# include <./ns9750_mem.h> -# endif -#endif - -/*********************************************************************** - * @Function: write_register_block - * @Return: nothing - * @Descr: Copies the register block of register_offset:register value to - * the registers at base r0. The block is assumed to start in RAM at r1 - * and end at r2. The linked RAM base address of U-Boot is assumed to be - * in r5 while the ROM base address we are running from is r6 - * Uses r3 and r4 as tempory registers - ***********************************************************************/ - -.macro write_register_block - @@ map the addresses to high memory - sub r1, r1, r5 - add r1, r1, r6 - sub r2, r2, r5 - add r2, r2, r6 - - @@ copy all -1: - @@ Write register/value pair starting at [r1] to register base r0 - ldr r3, [r1], #4 - ldr r4, [r1], #4 - str r4, [r0,r3] - cmp r1, r2 - blt 1b -.endm - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE @ sdram load addr from config.mk -_PHYS_FLASH: - .word PHYS_FLASH_1 @ real flash address (without mirroring) -_CAS_LATENCY: - .word 0x00022000 @ for CAS2 latency - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -.globl lowlevel_init -lowlevel_init: - - /* U-Boot may be linked to RAM at 0x780000. But this code will run in - flash from 0x0. But in order to enable RAM we have to disable the - mirror bit, therefore we have to jump to our real flash address - beginning at PHYS_FLASH_1 (CS4 Base). Therefore, - _run_at_real_flash_address may be 0x500003b0 while be linked to - 0x7803b0. So we must modify our linked addresses */ - - @@ branch to high memory address, away from 0x0 - ldr r5, _TEXT_BASE - ldr r6, _PHYS_FLASH - ldr r0, =_run_at_real_flash_address - sub r0, r0, r5 - add r0, r0, r6 - mov pc, r0 - nop @ for pipelining - -_run_at_real_flash_address: - @@ now we are running > PHYS_FLASH_1, safe to enable memory controller - - @@ Write Memory Configuration Registers - - ldr r0, _NS9750_MEM_MODULE_BASE - ldr r1, =_MEM_CONFIG_START - ldr r2, =_MEM_CONFIG_END - - write_register_block - - @@ Give SDRAM some time to settle - @@ @TODO. According to [2] it should be 2 AHB cycles. Check - - ldr r1, =0x50 -_sdram_settle: - subs r1, r1, #1 - bne _sdram_settle - -_enable_mappings: - @@ Enable SDRAM Mode - - ldr r1, =_MEM_MODE_START - ldr r2, =_MEM_MODE_END - - write_register_block - - ldr r3, _CAS_LATENCY @ perform one read from SDRAM - ldr r3, [r3] - - @@ Enable SDRAM and memory mappings - - ldr r1, =_MEM_ENABLE_START - ldr r2, =_MEM_ENABLE_END - - write_register_block - - @@ Activate AHB monitor - - ldr r0, =NS9750_SYS_MODULE_BASE - ldr r1, =_AHB_MONITOR_START - ldr r2, =_AHB_MONITOR_END - - write_register_block -_relocate_lr: - /* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to - PHYS_FLASH. */ - mov r1, ip - add r1, r1, r6 - mov ip, r1 - - mov r1, lr - add r1, r1, r6 - mov lr, r1 - - @@ back to arch calling code - mov pc, lr - - .ltorg - -_NS9750_MEM_MODULE_BASE: - .word NS9750_MEM_MODULE_BASE - -_MEM_CONFIG_START: - /* Table of 2 32bit entries. First word is register address offset - relative to NS9750_MEM_MODULE_BASE, second one is value. They are - written in order of appearance */ - - @@ Register values taken from [2] - .word NS9750_MEM_CTRL - .word NS9750_MEM_CTRL_E - - .word NS9750_MEM_DYN_REFRESH - .word (0x6 & NS9750_MEM_DYN_REFRESH_MA) - - .word NS9750_MEM_DYN_READ_CFG - .word (0x1 & NS9750_MEM_DYN_READ_CFG_MA) - - .word NS9750_MEM_DYN_TRP - .word (0x1 & NS9750_MEM_DYN_TRP_MA) - - .word NS9750_MEM_DYN_TRAS - .word (0x4 & NS9750_MEM_DYN_TRAS_MA) - - .word NS9750_MEM_DYN_TAPR - .word (0x1 & NS9750_MEM_DYN_TRAS_MA) - - .word NS9750_MEM_DYN_TDAL - .word (0x5 & NS9750_MEM_DYN_TDAL_MA) - - .word NS9750_MEM_DYN_TWR - .word (0x1 & NS9750_MEM_DYN_TWR_MA) - - .word NS9750_MEM_DYN_TRC - .word (0x6 & NS9750_MEM_DYN_TRC_MA) - - .word NS9750_MEM_DYN_TRFC - .word (0x6 & NS9750_MEM_DYN_TRFC_MA) - - .word NS9750_MEM_DYN_TRRD - .word (0x1 & NS9750_MEM_DYN_TRRD_MA) - - .word NS9750_MEM_DYN_TMRD - .word (0x1 & NS9750_MEM_DYN_TMRD_MA) - - @@ CS 4 - .word NS9750_MEM_DYN_CFG(0) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(0) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 5 - .word NS9750_MEM_DYN_CFG(1) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(1) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 6 - .word NS9750_MEM_DYN_CFG(2) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(2) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 7 - .word NS9750_MEM_DYN_CFG(3) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(3) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_PALL | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) - - .word NS9750_MEM_DYN_REFRESH - .word (0x1 & NS9750_MEM_DYN_REFRESH_MA) - @@ No further register settings after refresh -_MEM_CONFIG_END: - -_MEM_MODE_START: - .word NS9750_MEM_DYN_REFRESH - .word (0x30 & NS9750_MEM_DYN_REFRESH_MA) - - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_MODE | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) -_MEM_MODE_END: - -_MEM_ENABLE_START: - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_NORMAL | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) - - @@ CS 4 - .word NS9750_MEM_DYN_CFG(0) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 5 - .word NS9750_MEM_DYN_CFG(1) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 6 - .word NS9750_MEM_DYN_CFG(2) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 7 - .word NS9750_MEM_DYN_CFG(3) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) -_MEM_ENABLE_END: - -_AHB_MONITOR_START: - .word NS9750_SYS_AHB_TIMEOUT - .word 0x01000100 @ @TODO not calculated yet - - .word NS9750_SYS_AHB_MON - .word (NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \ - NS9750_SYS_AHB_MON_BATC_GEN_IRQ) -_AHB_MONITOR_END: - -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c deleted file mode 100644 index fc46244..0000000 --- a/board/ns9750dev/ns9750dev.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * Markus Pietrek <mpietrek@fsforth.de> - * derived from omap1610innovator.c - * @References: [1] NS9750 Hardware Reference/December 2003 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#if defined(CONFIG_NS9750DEV) -# include <./configs/ns9750dev.h> -# include <./ns9750_bbus.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -void flash__init( void ); -void ether__init( void ); - -static inline void delay( unsigned long loops ) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - - -/*********************************************************************** - * @Function: board_init - * @Return: 0 - * @Descr: Enables BBUS modules and other devices - ***********************************************************************/ - -int board_init( void ) -{ - /* Active BBUS modules */ - *get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0; - -#warning Please register your machine at http://www.arm.linux.org.uk/developer/machines/?action=new - /* arch number of OMAP 1510-Board */ - /* to be changed for OMAP 1610 Board */ - gd->bd->bi_arch_number = 234; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - -/* this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable(); - - flash__init(); - ether__init(); - return 0; -} - - -int misc_init_r (void) -{ - /* currently empty */ - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -void flash__init (void) -{ -} -/************************************************************* - Routine:ether__init - Description: take the Ethernet controller out of reset and wait - for the EEPROM load to complete. -*************************************************************/ -void ether__init (void) -{ -} - -/****************************** - Routine: - Description: -******************************/ -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - -#if CONFIG_NR_DRAM_BANKS > 1 - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; -#endif - return 0; -} diff --git a/board/overo/overo.c b/board/overo/overo.c index fdf46a2..8690450 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -392,7 +392,6 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c index 3a62e9d..9ff5dd7 100644 --- a/board/pandora/pandora.c +++ b/board/pandora/pandora.c @@ -139,7 +139,6 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/phytec/pcm051/mux.c b/board/phytec/pcm051/mux.c index 4d3a1d5..6e9c3d2 100644 --- a/board/phytec/pcm051/mux.c +++ b/board/phytec/pcm051/mux.c @@ -35,7 +35,6 @@ static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ {-1}, }; diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index fa0ace0..a28c704 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -147,7 +147,7 @@ int board_eth_init(bd_t *bis) !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index c516c75..d576786 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -81,6 +81,7 @@ static struct panel_config lcd_cfg[] = { .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }, { .timing_h = PANEL_TIMING_H(20, 192, 4), @@ -91,6 +92,7 @@ static struct panel_config lcd_cfg[] = { .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, + .gfx_format = GFXFORMAT_RGB24_UNPACKED, } }; #endif @@ -304,7 +306,7 @@ int board_eth_init(bd_t *bis) !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 48e6896..f4b972b 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -73,7 +73,7 @@ static inline int board_is_idk(void) return !strncmp(header.config, "SKU#02", 6); } -static int board_is_gp_evm(void) +static int __maybe_unused board_is_gp_evm(void) { return !strncmp("A33515BB", header.name, 8); } @@ -389,7 +389,8 @@ int board_late_init(void) } #endif -#ifdef CONFIG_DRIVER_TI_CPSW +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -434,26 +435,26 @@ static struct cpsw_platform_data cpsw_data = { int board_eth_init(bd_t *bis) { int rv, n = 0; -#ifdef CONFIG_DRIVER_TI_CPSW uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - printf("<ethaddr> not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + if (!getenv("ethaddr")) { + printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ether_addr(mac_addr)) eth_setenv_enetaddr("ethaddr", mac_addr); - else - goto try_usbether; } if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { @@ -494,8 +495,11 @@ int board_eth_init(bd_t *bis) AR8051_RGMII_TX_CLK_DLY); } #endif -try_usbether: -#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_USB_ETHER) && \ + (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("usbnet_devaddr", mac_addr); + rv = usb_eth_initialize(bis); if (rv < 0) printf("Error %d registering USB_ETHER\n", rv); diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c index 888398d..0b94245 100644 --- a/board/ti/am3517crane/am3517crane.c +++ b/board/ti/am3517crane/am3517crane.c @@ -78,7 +78,6 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index b829a79..3d9b6dd 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -72,6 +72,7 @@ #define BBTOYS_LCD 0x03000B00 #define BCT_BRETTL3 0x01000F00 #define BCT_BRETTL4 0x02000F00 +#define LSR_COM6L_ADPT 0x01001300 #define BEAGLE_NO_EEPROM 0xffffffff DECLARE_GLOBAL_DATA_PTR; @@ -227,6 +228,14 @@ static unsigned int get_expansion_id(void) i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, sizeof(expansion_config)); + /* retry reading configuration data with 16bit addressing */ + if ((expansion_config.device_vendor == 0xFFFFFF00) || + (expansion_config.device_vendor == 0xFFFFFFFF)) { + printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n"); + i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config, + sizeof(expansion_config)); + } + i2c_set_bus_num(TWL4030_I2C_BUS); return expansion_config.device_vendor; @@ -454,6 +463,11 @@ int misc_init_r(void) case BCT_BRETTL4: printf("Recognized bct electronic GmbH brettl4 board\n"); break; + case LSR_COM6L_ADPT: + printf("Recognized LSR COM6L Adapter Board\n"); + MUX_BBTOYS_WIFI() + setenv("buddy", "lsr-com6l-adpt"); + break; case BEAGLE_NO_EEPROM: printf("No EEPROM on expansion board\n"); setenv("buddy", "none"); @@ -518,8 +532,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index c0a94a9..6d71bbc 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -544,7 +544,8 @@ static const struct panel_config dvid_cfg = { .panel_type = 0x01, /* TFT */ .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ - .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */ + .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */ + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; static const struct panel_config dvid_cfg_xm = { @@ -556,6 +557,7 @@ static const struct panel_config dvid_cfg_xm = { .panel_type = 0x01, /* TFT */ .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ - .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */ + .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */ + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; #endif diff --git a/board/ns9750dev/Makefile b/board/ti/dra7xx/Makefile index 0d082c5..db6da5b 100644 --- a/board/ns9750dev/Makefile +++ b/board/ti/dra7xx/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# (C) Copyright 2013 +# Texas Instruments, <www.ti.com> # # See file CREDITS for list of people who contributed to this # project. @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -25,15 +25,19 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := ns9750dev.o flash.o led.o -SOBJS := lowlevel_init.o +COBJS := evm.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c new file mode 100644 index 0000000..7bbb549 --- /dev/null +++ b/board/ti/dra7xx/evm.c @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated, <www.ti.com> + * + * Lokesh Vutla <lokeshvutla@ti.com> + * + * Based on previous work by: + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl6035.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> + +#include "mux_data.h" + +#ifdef CONFIG_USB_EHCI +#include <usb.h> +#include <asm/arch/ehci.h> +#include <asm/ehci-omap.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: DRA7xx\n" +}; + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return 0; +} + +/** + * @brief misc_init_r - Configure EVM board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ + return 0; +} + +static void do_set_mux32(u32 base, + struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *)array; + + for (i = 0; i < size; i++, pad++) + writel(pad->val, base + pad->offset); +} + +void set_muxconf_regs_essential(void) +{ + do_set_mux32((*ctrl)->control_padconf_core_base, + core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); +} + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); + return 0; +} +#endif diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h new file mode 100644 index 0000000..04c95fd --- /dev/null +++ b/board/ti/dra7xx/mux_data.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * Nishant Kamat <nskamat@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_DATA_DRA7XX_H_ +#define _MUX_DATA_DRA7XX_H_ + +#include <asm/arch/mux_dra7xx.h> + +const struct pad_conf_entry core_padconf_array_essential[] = { + {MMC1_CLK, (PTU | IEN | M0)}, /* MMC1_CLK */ + {MMC1_CMD, (PTU | IEN | M0)}, /* MMC1_CMD */ + {MMC1_DAT0, (PTU | IEN | M0)}, /* MMC1_DAT0 */ + {MMC1_DAT1, (PTU | IEN | M0)}, /* MMC1_DAT1 */ + {MMC1_DAT2, (PTU | IEN | M0)}, /* MMC1_DAT2 */ + {MMC1_DAT3, (PTU | IEN | M0)}, /* MMC1_DAT3 */ + {MMC1_SDCD, (PTU | IEN | M0)}, /* MMC1_SDCD */ + {MMC1_SDWP, (PTU | IEN | M0)}, /* MMC1_SDWP */ + {UART1_RXD, (PTU | IEN | M0)}, /* UART1_RXD */ + {UART1_TXD, (M0)}, /* UART1_TXD */ + {UART1_CTSN, (PTU | IEN | M0)}, /* UART1_CTSN */ + {UART1_RTSN, (M0)}, /* UART1_RTSN */ + {I2C1_SDA, (PTU | IEN | M0)}, /* I2C1_SDA */ + {I2C1_SCL, (PTU | IEN | M0)}, /* I2C1_SCL */ +}; +#endif /* _MUX_DATA_DRA7XX_H_ */ diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 8a3aa0c..3c2dcab 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -277,7 +277,6 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c index c8dfdf8..55337c0 100644 --- a/board/ti/omap5_evm/evm.c +++ b/board/ti/omap5_evm/evm.c @@ -94,8 +94,8 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 4feef78..cab0598 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -179,8 +179,7 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c index 9a1c012..052efc5 100644 --- a/board/ti/sdp3430/sdp.c +++ b/board/ti/sdp3430/sdp.c @@ -209,7 +209,6 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 982c771..4c1a4f7 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -108,8 +108,8 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index b88d978..ebff59e 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -136,8 +136,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif @@ -233,11 +233,13 @@ integratorap_cm946es arm arm946es integrator armltd integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES ca9x4_ct_vxp arm armv7 vexpress armltd am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1 +am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2 am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3 am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4 am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5 am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6 +am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT pcm051 arm armv7 pcm051 phytec am33xx pcm051 highbank arm armv7 highbank - highbank mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg @@ -262,6 +264,7 @@ igep0020 arm armv7 igep00x0 isee igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND +igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 @@ -282,6 +285,7 @@ nokia_rx51 arm armv7 rx51 nokia omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 omap5_evm arm armv7 omap5_evm ti omap5 +dra7xx_evm arm armv7 dra7xx ti omap5 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx origen arm armv7 origen samsung exynos @@ -301,6 +305,7 @@ snowball arm armv7 snowball st-e kzm9g arm armv7 kzm9g kmc rmobile armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile zynq arm armv7 zynq xilinx zynq +zynq_dcc arm armv7 zynq xilinx zynq zynq:ZYNQ_DCC socfpga_cyclone5 arm armv7 socfpga_cyclone5 altera socfpga actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 7dacd51..8c53a10 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -282,6 +282,13 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) mmc_init(mmc); + if ((state == MMC_WRITE || state == MMC_ERASE)) { + if (mmc_getwp(mmc) == 1) { + printf("Error: card is write protected!\n"); + return 1; + } + } + switch (state) { case MMC_READ: n = mmc->block_dev.block_read(curr_device, blk, diff --git a/common/lcd.c b/common/lcd.c index 66d4f94..590bbb9 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -33,6 +33,8 @@ #include <common.h> #include <command.h> #include <stdarg.h> +#include <search.h> +#include <env_callback.h> #include <linux/types.h> #include <stdio_dev.h> #if defined(CONFIG_POST) @@ -1034,6 +1036,18 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } #endif +#ifdef CONFIG_SPLASH_SCREEN_PREPARE +static inline int splash_screen_prepare(void) +{ + return board_splash_screen_prepare(); +} +#else +static inline int splash_screen_prepare(void) +{ + return 0; +} +#endif + static void *lcd_logo(void) { #ifdef CONFIG_SPLASH_SCREEN @@ -1045,6 +1059,9 @@ static void *lcd_logo(void) int x = 0, y = 0; do_splash = 0; + if (splash_screen_prepare()) + return (void *)gd->fb_base; + addr = simple_strtoul (s, NULL, 16); #ifdef CONFIG_SPLASH_SCREEN_ALIGN s = getenv("splashpos"); @@ -1084,6 +1101,30 @@ static void *lcd_logo(void) #endif /* CONFIG_LCD_LOGO && !CONFIG_LCD_INFO_BELOW_LOGO */ } +#ifdef CONFIG_SPLASHIMAGE_GUARD +static int on_splashimage(const char *name, const char *value, enum env_op op, + int flags) +{ + ulong addr; + int aligned; + + if (op == env_op_delete) + return 0; + + addr = simple_strtoul(value, NULL, 16); + /* See README.displaying-bmps */ + aligned = (addr % 4 == 2); + if (!aligned) { + printf("Invalid splashimage value. Value must be 16 bit aligned, but not 32 bit aligned\n"); + return -1; + } + + return 0; +} + +U_BOOT_ENV_CALLBACK(splashimage, on_splashimage); +#endif + void lcd_position_cursor(unsigned col, unsigned row) { console_col = min(col, CONSOLE_COLS - 1); diff --git a/common/spl/Makefile b/common/spl/Makefile index 5698a23..da2afc1 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -18,6 +18,7 @@ COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o +COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o endif diff --git a/common/spl/spl.c b/common/spl/spl.c index ff9ba7b..6715e0d 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -197,6 +197,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) spl_nand_load_image(); break; #endif +#ifdef CONFIG_SPL_ONENAND_SUPPORT + case BOOT_DEVICE_ONENAND: + spl_onenand_load_image(); + break; +#endif #ifdef CONFIG_SPL_NOR_SUPPORT case BOOT_DEVICE_NOR: spl_nor_load_image(); @@ -221,6 +226,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) #endif break; #endif +#ifdef CONFIG_SPL_USBETH_SUPPORT + case BOOT_DEVICE_USBETH: + spl_net_load_image("usb_ether"); + break; +#endif default: debug("SPL: Un-supported Boot Device\n"); hang(); diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c new file mode 100644 index 0000000..4349303 --- /dev/null +++ b/common/spl/spl_onenand.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2013 + * ISEE 2007 SL - Enric Balletbo i Serra <eballetbo@iseebcn.com> + * + * Based on common/spl/spl_nand.c + * Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <config.h> +#include <spl.h> +#include <asm/io.h> +#include <onenand_uboot.h> + +void spl_onenand_load_image(void) +{ + struct image_header *header; + + debug("spl: onenand\n"); + + /*use CONFIG_SYS_TEXT_BASE as temporary storage area */ + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); + /* Load u-boot */ + onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS, + CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header); + spl_parse_image_header(header); + onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS, + spl_image.size, (void *)spl_image.load_addr); +} diff --git a/doc/README.displaying-bmps b/doc/README.displaying-bmps new file mode 100644 index 0000000..3311541 --- /dev/null +++ b/doc/README.displaying-bmps @@ -0,0 +1,27 @@ +If you are experiencing hangups/data-aborts when trying to display a BMP image, +the following might be relevant to your situation... + +Some architectures cannot handle unaligned memory accesses, and an attempt to +perform one will lead to a data abort. On such architectures it is necessary to +make sure all data is properly aligned, and in many situations simply choosing +a 32 bit aligned address is enough to ensure proper alignment. This is not +always the case when dealing with data that has an internal layout such as a +BMP image: + +BMP images have a header that starts with 2 byte-size fields followed by mostly +32 bit fields. The packed struct that represents this header can be seen below: + +typedef struct bmp_header { + /* Header */ + char signature[2]; + __u32 file_size; + __u32 reserved; + __u32 data_offset; + ... etc +} __attribute__ ((packed)) bmp_header_t; + +When placed in an aligned address such as 0x80a00000, char signature offsets +the __u32 fields into unaligned addresses (in our example 0x80a00002, +0x80a00006, and so on...). When these fields are accessed by U-Boot, a 32 bit +access is generated at a non-32-bit-aligned address, causing a data abort. +The proper alignment for BMP images is therefore: 32-bit-aligned-address + 2. diff --git a/doc/README.ns9750dev b/doc/README.ns9750dev deleted file mode 100644 index 2991440..0000000 --- a/doc/README.ns9750dev +++ /dev/null @@ -1,36 +0,0 @@ -U-Boot Port to the NS9750 DevKit from NetSilicon - -1 Overview -2 Board Configuration -3 Installation - - -1 Overview ----------- - -This port supports these NS9750 features. - -o one UART - -2 Board Configuration ---------------------- - -Switches: -SW10: 4 -SW11: 6,7 -SW16: 6,7,8 -SW17-SW20: 1 -SW4: 3, 6 -SW 1: 1 -SW2: 4 -SW3: 3 -SW8: 3 (rotated by 180 degree!!!!) - -Serial Console is Port B (bottom right port) - -3 Installation --------------- - -Have fun, --- -Markus Pietrek <mpietrek@fsforth.de> diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 2b868e6..e9ca96c 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -9,83 +9,84 @@ maintain a list of such former fellows, so archeologists can check easily if here is something they might want to dig for... -Board Arch CPU removed Commit last known maintainer/contact -============================================================================= -AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de> -c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de> -ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de> -IAD210 powerpc mpc860 - - - -LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de> -SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de> -SX1 arm arm925t - - -TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de> -apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> -tb0229 mips mips32 3f3110d 2011-12-12 -rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de> -OXC powerpc MPC8240 309a292 2011-12-07 -BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de> -xm250 arm pxa c746cdd 2011-25-11 -pleb2 arm pxa b185a1c 2011-25-11 -cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net> -cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com> -mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com> -ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de> -ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net> -zylonite arm pxa b66521a 2011-09-05 -shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de> -modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org> -lpc2292sodimm arm arm720t d1a067a 2011-09-05 -lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu@sysgo.de> -impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag@sysgo.de> -gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com> -evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com> -ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag@sysgo.de> -dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu@sysgo.de> -SMN42 arm arm720t 6aac646 2011-09-05 -at91rm9200dk arm arm920t 1c85752 2011-07-17 -m501sk arm arm920t b1a2bd4 2011-07-17 -kb9202 arm arm920t 5bd3814 2011-07-17 -csb637 arm arm920t d14af08 2011-07-17 -cmc_pu2 arm arm920t 37a9b4d 2011-07-17 -at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net> -voiceblue arm arm925t 1b793a4 2011-07-17 -smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de> -sbc2410x arm arm920t 1f7f0ed 2011-07-17 -netstar arm arm925t 6ea2405 2011-07-17 -mx1fs2 arm arm920t 6962419 2011-07-17 -lpd7a404 arm lh7a40x 957731e 2011-07-17 -edb9301 arm arm920t 716f7ad 2011-07-17 -edb9302 arm arm920t 716f7ad 2011-07-17 -edb9302a arm arm920t 716f7ad 2011-07-17 -edb9307 arm arm920t 716f7ad 2011-07-17 -edb9307a arm arm920t 716f7ad 2011-07-17 -edb9312 arm arm920t 716f7ad 2011-07-17 -edb9315 arm arm920t 716f7ad 2011-07-17 -edb9315a arm arm920t 716f7ad 2011-07-17 -B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it> -armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com> -assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com> -trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de> -xsengine ARM PXA2xx 4262a7c 2010-10-20 -wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk> -delta ARM PXA2xx 75e2035 2010-10-20 -mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric@eukrea.com> -barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com> -ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de> -VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de> -NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> -CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> -logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at> -CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de> -PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de> -spieval powerpc MPC5200 69434e4 2010-09-19 -smmaco4 powerpc MPC5200 9ddc3af 2010-09-19 -HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de> -GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se> -AmigaOneG3SE 953b7e6 2010-06-23 -suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com> -XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu> -MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de> -adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com> -R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com> -CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Board Arch CPU Commit Removed Last known maintainer/contact +================================================================================================= +ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de> +AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +IAD210 powerpc mpc860 1b0757e 2012-10-28 - +LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de> +SX1 arm arm925t 53c4154 2012-10-26 +TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de> +apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> +tb0229 mips mips32 3f3110d 2011-12-12 +rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de> +OXC powerpc MPC8240 309a292 2011-12-07 +BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de> +xm250 arm pxa c746cdd 2011-25-11 +pleb2 arm pxa b185a1c 2011-25-11 +cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net> +cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com> +mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com> +ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de> +ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net> +zylonite arm pxa b66521a 2011-09-05 +shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de> +modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org> +lpc2292sodimm arm arm720t d1a067a 2011-09-05 +lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu@sysgo.de> +impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag@sysgo.de> +gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com> +evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com> +ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag@sysgo.de> +dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu@sysgo.de> +SMN42 arm arm720t 6aac646 2011-09-05 +at91rm9200dk arm arm920t 1c85752 2011-07-17 +m501sk arm arm920t b1a2bd4 2011-07-17 +kb9202 arm arm920t 5bd3814 2011-07-17 +csb637 arm arm920t d14af08 2011-07-17 +cmc_pu2 arm arm920t 37a9b4d 2011-07-17 +at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net> +voiceblue arm arm925t 1b793a4 2011-07-17 +smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de> +sbc2410x arm arm920t 1f7f0ed 2011-07-17 +netstar arm arm925t 6ea2405 2011-07-17 +mx1fs2 arm arm920t 6962419 2011-07-17 +lpd7a404 arm lh7a40x 957731e 2011-07-17 +edb9301 arm arm920t 716f7ad 2011-07-17 +edb9302 arm arm920t 716f7ad 2011-07-17 +edb9302a arm arm920t 716f7ad 2011-07-17 +edb9307 arm arm920t 716f7ad 2011-07-17 +edb9307a arm arm920t 716f7ad 2011-07-17 +edb9312 arm arm920t 716f7ad 2011-07-17 +edb9315 arm arm920t 716f7ad 2011-07-17 +edb9315a arm arm920t 716f7ad 2011-07-17 +B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it> +armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com> +assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com> +trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de> +xsengine ARM PXA2xx 4262a7c 2010-10-20 +wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk> +delta ARM PXA2xx 75e2035 2010-10-20 +mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric@eukrea.com> +barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com> +ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de> +VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de> +NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> +CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> +logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at> +CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de> +PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de> +spieval powerpc MPC5200 69434e4 2010-09-19 +smmaco4 powerpc MPC5200 9ddc3af 2010-09-19 +HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de> +GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se> +AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23 +suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com> +XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu> +MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de> +adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com> +R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com> +CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com> diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network new file mode 100644 index 0000000..e5a198f --- /dev/null +++ b/doc/SPL/README.am335x-network @@ -0,0 +1,92 @@ +USING AM335x NETBOOT FEATURE + + Some boards (like TI AM335x based ones) have quite big on-chip RAM and +have support for booting via network in ROM. The following describes +how to setup network booting and then optionally use this support to flash +NAND and bricked (empty) board with only a network cable. + + I. Building the required images + 1. You have to enable generic SPL configuration options (see +docs/README.SPL) as well as CONFIG_SPL_NET_SUPPORT, +CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and +CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build +SPL with support for booting over the network. Also you have to enable +the driver for the NIC used and CONFIG_SPL_BOARD_INIT option if your +board needs some board-specific initialization (TI AM335x EVM does). +If you want SPL to use some Vendor Class Identifier (VCI) you can set +one with CONFIG_SPL_NET_VCI_STRING option. am335x_evm configuration +comes with support for network booting preconfigured. + 2. Define CONFIG_BOOTCOMMAND for your board to load and run debrick +script after boot: +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "bootp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +(Or create additional board configuration with such option). + 3. Build U-Boot as usual + $ make <your_board_name> + You will need u-boot.img and spl/u-boot.bin images to perform +network boot. Copy them to u-boot-restore.img and +u-boot-spl-restore.bin respectively to distinguish this version +(with automatic restore running) from the main one. + + II. Host configuration. + 1. Setup DHCP server (recommended server is ISC DHCPd). + - Install DHCP server and setup it to listen on the interface you +chose to connect to the board (usually configured in +/etc/default/dhcpd or /etc/default/isc-dhcp-server). Make sure there +are no other active DHCP servers in the same network segment. + - Edit your dhcpd.conf and subnet declaration matching the address +on the interface. Specify the range of assigned addresses and bootfile +to use. IMPORTANT! Both RBL and SPL use the image filename provided +in the BOOTP reply but obviously they need different images (RBL needs +raw SPL image -- u-boot-spl-restore.bin while SPL needs main U-Boot +image -- u-boot-restore.img). So you have to configure DHCP server to +provide different image filenames to RBL and SPL (and possibly another +one to main U-Boot). This can be done by checking Vendor Class +Identifier (VCI) set by BOOTP client (RBL sets VCI to "DM814x ROM v1.0" +and you can set VCI used by SPL with CONFIG_SPL_NET_VCI_STRING option, +see above). + - If you plan to use TFTP server on another machine you have to set +server-name option to point to it. + - Here is sample configuration for ISC DHCPd, assuming the interface +used to connect to the board is eth0, and it has address 192.168.8.1: + +subnet 192.168.8.0 netmask 255.255.255.0 { + range dynamic-bootp 192.168.8.100 192.168.8.199; + + if substring (option vendor-class-identifier, 0, 10) = "DM814x ROM" { + filename "u-boot-spl-restore.bin"; + } elsif substring (option vendor-class-identifier, 0, 17) = "AM335x U-Boot SPL" { + filename "u-boot-restore.img"; + } else { + filename "uImage"; + } +} + + 2. Setup TFTP server. + Install TFTP server and put image files to it's root directory +(likely /tftpboot or /var/lib/tftpboot or /srv/tftp). You will need +u-boot.img and spl/u-boot-spl-bin files from U-Boot build directory. + + III. Reflashing (debricking) the board. + 1. Write debrick script. You will need to write a script that will +be executed after network boot to perform actual rescue actions. You +can use usual U-Boot commands from this script: tftp to load additional +files, nand erase/nand write to erase/write the NAND flash. + + 2. Create script image from your script. From U-Boot build directory: + +$ ./tools/mkimage -A arm -O U-Boot -C none -T script -d <your script> debrick.scr + +This will create debrick.scr file with your script inside. + + 3. Copy debrick.scr to TFTP root directory. You also need to copy +there all the files your script tries to load via TFTP. Example script +loads u-boot.img and MLO. You have to create these files doing regular +(not restore_flash) build and copy them to tftpboot directory. + + 4. Boot the board from the network, U-Boot will load debrick script +and run it after boot. diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt index c6a8ab0..ef71fea 100644 --- a/doc/driver-model/UDM-serial.txt +++ b/doc/driver-model/UDM-serial.txt @@ -86,7 +86,7 @@ III) Analysis of in-tree drivers 7) ns9750_serial.c ------------------ - No support for CONFIG_SERIAL_MULTI. Simple conversion possible. + Unmaintained port. Code got removed. 8) opencores_yanu.c ------------------- diff --git a/drivers/gpio/da8xx_gpio.c b/drivers/gpio/da8xx_gpio.c index ed6a118..76648d2 100644 --- a/drivers/gpio/da8xx_gpio.c +++ b/drivers/gpio/da8xx_gpio.c @@ -34,6 +34,138 @@ static struct gpio_registry { #if defined(CONFIG_SOC_DA8XX) #define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) +#if defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850) +static const struct pinmux_config gpio_pinmux[] = { + { pinmux(13), 8, 6 }, /* GP0[0] */ + { pinmux(13), 8, 7 }, + { pinmux(14), 8, 0 }, + { pinmux(14), 8, 1 }, + { pinmux(14), 8, 2 }, + { pinmux(14), 8, 3 }, + { pinmux(14), 8, 4 }, + { pinmux(14), 8, 5 }, + { pinmux(14), 8, 6 }, + { pinmux(14), 8, 7 }, + { pinmux(15), 8, 0 }, + { pinmux(15), 8, 1 }, + { pinmux(15), 8, 2 }, + { pinmux(15), 8, 3 }, + { pinmux(15), 8, 4 }, + { pinmux(15), 8, 5 }, + { pinmux(15), 8, 6 }, /* GP1[0] */ + { pinmux(15), 8, 7 }, + { pinmux(16), 8, 0 }, + { pinmux(16), 8, 1 }, + { pinmux(16), 8, 2 }, + { pinmux(16), 8, 3 }, + { pinmux(16), 8, 4 }, + { pinmux(16), 8, 5 }, + { pinmux(16), 8, 6 }, + { pinmux(16), 8, 7 }, + { pinmux(17), 8, 0 }, + { pinmux(17), 8, 1 }, + { pinmux(17), 8, 2 }, + { pinmux(17), 8, 3 }, + { pinmux(17), 8, 4 }, + { pinmux(17), 8, 5 }, + { pinmux(17), 8, 6 }, /* GP2[0] */ + { pinmux(17), 8, 7 }, + { pinmux(18), 8, 0 }, + { pinmux(18), 8, 1 }, + { pinmux(18), 8, 2 }, + { pinmux(18), 8, 3 }, + { pinmux(18), 8, 4 }, + { pinmux(18), 8, 5 }, + { pinmux(18), 8, 6 }, + { pinmux(18), 8, 7 }, + { pinmux(19), 8, 0 }, + { pinmux(9), 8, 2 }, + { pinmux(9), 8, 3 }, + { pinmux(9), 8, 4 }, + { pinmux(9), 8, 5 }, + { pinmux(9), 8, 6 }, + { pinmux(10), 8, 1 }, /* GP3[0] */ + { pinmux(10), 8, 2 }, + { pinmux(10), 8, 3 }, + { pinmux(10), 8, 4 }, + { pinmux(10), 8, 5 }, + { pinmux(10), 8, 6 }, + { pinmux(10), 8, 7 }, + { pinmux(11), 8, 0 }, + { pinmux(11), 8, 1 }, + { pinmux(11), 8, 2 }, + { pinmux(11), 8, 3 }, + { pinmux(11), 8, 4 }, + { pinmux(9), 8, 7 }, + { pinmux(2), 8, 6 }, + { pinmux(11), 8, 5 }, + { pinmux(11), 8, 6 }, + { pinmux(12), 8, 4 }, /* GP4[0] */ + { pinmux(12), 8, 5 }, + { pinmux(12), 8, 6 }, + { pinmux(12), 8, 7 }, + { pinmux(13), 8, 0 }, + { pinmux(13), 8, 1 }, + { pinmux(13), 8, 2 }, + { pinmux(13), 8, 3 }, + { pinmux(13), 8, 4 }, + { pinmux(13), 8, 5 }, + { pinmux(11), 8, 7 }, + { pinmux(12), 8, 0 }, + { pinmux(12), 8, 1 }, + { pinmux(12), 8, 2 }, + { pinmux(12), 8, 3 }, + { pinmux(9), 8, 1 }, + { pinmux(7), 8, 3 }, /* GP5[0] */ + { pinmux(7), 8, 4 }, + { pinmux(7), 8, 5 }, + { pinmux(7), 8, 6 }, + { pinmux(7), 8, 7 }, + { pinmux(8), 8, 0 }, + { pinmux(8), 8, 1 }, + { pinmux(8), 8, 2 }, + { pinmux(8), 8, 3 }, + { pinmux(8), 8, 4 }, + { pinmux(8), 8, 5 }, + { pinmux(8), 8, 6 }, + { pinmux(8), 8, 7 }, + { pinmux(9), 8, 0 }, + { pinmux(7), 8, 1 }, + { pinmux(7), 8, 2 }, + { pinmux(5), 8, 1 }, /* GP6[0] */ + { pinmux(5), 8, 2 }, + { pinmux(5), 8, 3 }, + { pinmux(5), 8, 4 }, + { pinmux(5), 8, 5 }, + { pinmux(5), 8, 6 }, + { pinmux(5), 8, 7 }, + { pinmux(6), 8, 0 }, + { pinmux(6), 8, 1 }, + { pinmux(6), 8, 2 }, + { pinmux(6), 8, 3 }, + { pinmux(6), 8, 4 }, + { pinmux(6), 8, 5 }, + { pinmux(6), 8, 6 }, + { pinmux(6), 8, 7 }, + { pinmux(7), 8, 0 }, + { pinmux(1), 8, 0 }, /* GP7[0] */ + { pinmux(1), 8, 1 }, + { pinmux(1), 8, 2 }, + { pinmux(1), 8, 3 }, + { pinmux(1), 8, 4 }, + { pinmux(1), 8, 5 }, + { pinmux(1), 8, 6 }, + { pinmux(1), 8, 7 }, + { pinmux(2), 8, 0 }, + { pinmux(2), 8, 1 }, + { pinmux(2), 8, 2 }, + { pinmux(2), 8, 3 }, + { pinmux(2), 8, 4 }, + { pinmux(2), 8, 5 }, + { pinmux(0), 1, 0 }, + { pinmux(0), 1, 1 }, +}; +#else /* CONFIG_SOC_DA8XX && CONFIG_SOC_DA850 */ static const struct pinmux_config gpio_pinmux[] = { { pinmux(1), 8, 7 }, /* GP0[0] */ { pinmux(1), 8, 6 }, @@ -180,9 +312,10 @@ static const struct pinmux_config gpio_pinmux[] = { { pinmux(18), 8, 3 }, { pinmux(18), 8, 2 }, }; -#else +#endif /* CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850 */ +#else /* !CONFIG_SOC_DA8XX */ #define davinci_configure_pin_mux(a, b) -#endif +#endif /* CONFIG_SOC_DA8XX */ int gpio_request(unsigned gpio, const char *label) { diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c index af1380a..ab2e81e 100644 --- a/drivers/mmc/arm_pl180_mmci.c +++ b/drivers/mmc/arm_pl180_mmci.c @@ -377,6 +377,7 @@ int arm_pl180_mmci_init(struct pl180_mmc_host *host) dev->set_ios = host_set_ios; dev->init = mmc_host_reset; dev->getcd = NULL; + dev->getwp = NULL; dev->host_caps = host->caps; dev->voltages = host->voltages; dev->f_min = host->clock_min; diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index 0f98b96..2631174 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -287,6 +287,7 @@ int bfin_mmc_init(bd_t *bis) mmc->set_ios = bfin_sdh_set_ios; mmc->init = bfin_sdh_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_4BIT; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c index ee8f261..e2379e3 100644 --- a/drivers/mmc/davinci_mmc.c +++ b/drivers/mmc/davinci_mmc.c @@ -388,6 +388,7 @@ int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host) mmc->set_ios = dmmc_set_ios; mmc->init = dmmc_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->f_min = 200000; mmc->f_max = 25000000; diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index b90f3e7..54b5363 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -552,6 +552,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) mmc->set_ios = esdhc_set_ios; mmc->init = esdhc_init; mmc->getcd = esdhc_getcd; + mmc->getwp = NULL; voltage_caps = 0; caps = regs->hostcapblt; diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c index f1702fe..42f0e0c 100644 --- a/drivers/mmc/ftsdc010_esdhc.c +++ b/drivers/mmc/ftsdc010_esdhc.c @@ -666,6 +666,7 @@ int ftsdc010_mmc_init(int dev_index) mmc->set_ios = ftsdc010_set_ios; mmc->init = ftsdc010_core_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 67b2dbe..70a9f91 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -349,6 +349,7 @@ int atmel_mci_init(void *regs) mmc->set_ios = mci_set_ios; mmc->init = mci_init; mmc->getcd = NULL; + mmc->getwp = NULL; /* need to be able to pass these in on a board by board basis */ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 72e8ce6..7b5fdd9 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -40,6 +40,23 @@ static struct list_head mmc_devices; static int cur_dev_num = -1; +int __weak board_mmc_getwp(struct mmc *mmc) +{ + return -1; +} + +int mmc_getwp(struct mmc *mmc) +{ + int wp; + + wp = board_mmc_getwp(mmc); + + if ((wp < 0) && mmc->getwp) + wp = mmc->getwp(mmc); + + return wp; +} + int __board_mmc_getcd(struct mmc *mmc) { return -1; } diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c index 11ba532..fe6a5a1 100644 --- a/drivers/mmc/mmc_spi.c +++ b/drivers/mmc/mmc_spi.c @@ -273,6 +273,7 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode) mmc->set_ios = mmc_spi_set_ios; mmc->init = mmc_spi_init_p; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_SPI; mmc->voltages = MMC_SPI_VOLTAGE; diff --git a/drivers/mmc/mxcmmc.c b/drivers/mmc/mxcmmc.c index d58c18b..4f99617 100644 --- a/drivers/mmc/mxcmmc.c +++ b/drivers/mmc/mxcmmc.c @@ -499,6 +499,7 @@ static int mxcmci_initialize(bd_t *bis) mmc->set_ios = mxcmci_set_ios; mmc->init = mxcmci_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_4BIT; host->base = (struct mxcmci_regs *)CONFIG_MXC_MCI_REGS_BASE; diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index a72f66c..a87529d 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -432,6 +432,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) mmc->set_ios = mxsmmc_set_ios; mmc->init = mxsmmc_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->priv = priv; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index afd9b30..67cfcc2 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -30,6 +30,7 @@ #include <twl4030.h> #include <twl6030.h> #include <twl6035.h> +#include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> @@ -38,30 +39,71 @@ #define SYSCTL_SRC (1 << 25) #define SYSCTL_SRD (1 << 26) +struct omap_hsmmc_data { + struct hsmmc *base_addr; + int cd_gpio; + int wp_gpio; +}; + /* If we fail after 1 second wait, something is really bad */ #define MAX_RETRY_MS 1000 static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size); static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int siz); -static struct mmc hsmmc_dev[2]; +static struct mmc hsmmc_dev[3]; +static struct omap_hsmmc_data hsmmc_dev_data[3]; + +#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT)) +static int omap_mmc_setup_gpio_in(int gpio, const char *label) +{ + if (!gpio_is_valid(gpio)) + return -1; + + if (gpio_request(gpio, label) < 0) + return -1; + + if (gpio_direction_input(gpio) < 0) + return -1; + + return gpio; +} + +static int omap_mmc_getcd(struct mmc *mmc) +{ + int cd_gpio = ((struct omap_hsmmc_data *)mmc->priv)->cd_gpio; + return gpio_get_value(cd_gpio); +} + +static int omap_mmc_getwp(struct mmc *mmc) +{ + int wp_gpio = ((struct omap_hsmmc_data *)mmc->priv)->wp_gpio; + return gpio_get_value(wp_gpio); +} +#else +static inline int omap_mmc_setup_gpio_in(int gpio, const char *label) +{ + return -1; +} + +#define omap_mmc_getcd NULL +#define omap_mmc_getwp NULL +#endif #if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER) static void omap4_vmmc_pbias_config(struct mmc *mmc) { u32 value = 0; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - value = readl(&ctrl->control_pbiaslite); + value = readl((*ctrl)->control_pbiaslite); value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ); - writel(value, &ctrl->control_pbiaslite); + writel(value, (*ctrl)->control_pbiaslite); /* set VMMC to 3V */ twl6030_power_mmc_init(); - value = readl(&ctrl->control_pbiaslite); + value = readl((*ctrl)->control_pbiaslite); value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ; - writel(value, &ctrl->control_pbiaslite); + writel(value, (*ctrl)->control_pbiaslite); } #endif @@ -69,26 +111,24 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc) static void omap5_pbias_config(struct mmc *mmc) { u32 value = 0; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); value |= SDCARD_BIAS_HIZ_MODE; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); twl6035_mmc1_poweron_ldo(); - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); value &= ~SDCARD_BIAS_HIZ_MODE; value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); if (value & (1 << 23)) { value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); value |= SDCARD_BIAS_HIZ_MODE; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); } } #endif @@ -177,11 +217,12 @@ void mmc_init_stream(struct hsmmc *mmc_base) static int mmc_init_setup(struct mmc *mmc) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int reg_val; unsigned int dsor; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; mmc_board_init(mmc); writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET, @@ -262,10 +303,11 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int flags, mmc_stat; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; start = get_timer(0); while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { @@ -489,10 +531,11 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, static void mmc_set_ios(struct mmc *mmc) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int dsor = 0; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; /* configue bus width */ switch (mmc->bus_width) { case 8: @@ -540,36 +583,40 @@ static void mmc_set_ios(struct mmc *mmc) writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); } -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max) +int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, + int wp_gpio) { - struct mmc *mmc; - - mmc = &hsmmc_dev[dev_index]; + struct mmc *mmc = &hsmmc_dev[dev_index]; + struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index]; sprintf(mmc->name, "OMAP SD/MMC"); mmc->send_cmd = mmc_send_cmd; mmc->set_ios = mmc_set_ios; mmc->init = mmc_init_setup; - mmc->getcd = NULL; + mmc->getcd = omap_mmc_getcd; + mmc->getwp = omap_mmc_getwp; + mmc->priv = priv_data; switch (dev_index) { case 0: - mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; break; #ifdef OMAP_HSMMC2_BASE case 1: - mmc->priv = (struct hsmmc *)OMAP_HSMMC2_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; break; #endif #ifdef OMAP_HSMMC3_BASE case 2: - mmc->priv = (struct hsmmc *)OMAP_HSMMC3_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; break; #endif default: - mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; return 1; } + priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd"); + priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp"); mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC) & ~host_caps_mask; diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index b9cbe34..daca0ea 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -438,6 +438,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) mmc->set_ios = sdhci_set_ios; mmc->init = sdhci_init; mmc->getcd = NULL; + mmc->getwp = NULL; caps = sdhci_readl(host, SDHCI_CAPABILITIES); #ifdef CONFIG_MMC_SDMA diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c index 4588568..011d4f3 100644 --- a/drivers/mmc/sh_mmcif.c +++ b/drivers/mmc/sh_mmcif.c @@ -599,6 +599,7 @@ int mmcif_mmc_init(void) mmc->set_ios = sh_mmcif_set_ios; mmc->init = sh_mmcif_init; mmc->getcd = NULL; + mmc->getwp = NULL; host->regs = (struct sh_mmcif_regs *)CONFIG_SH_MMCIF_ADDR; host->clk = CONFIG_SH_MMCIF_CLK; mmc->priv = host; diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index d749ab0..7258619 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -563,6 +563,7 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) mmc->set_ios = mmc_set_ios; mmc->init = mmc_core_init; mmc->getcd = tegra_mmc_getcd; + mmc->getwp = NULL; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; mmc->host_caps = 0; diff --git a/drivers/mtd/onenand/onenand_spl.c b/drivers/mtd/onenand/onenand_spl.c index 50eaa71..4bec2c2 100644 --- a/drivers/mtd/onenand/onenand_spl.c +++ b/drivers/mtd/onenand/onenand_spl.c @@ -112,7 +112,7 @@ static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf, void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) { uint32_t *addr = (uint32_t *)dst; - uint32_t total_pages; + uint32_t to_page; uint32_t block; uint32_t page, rpage; enum onenand_spl_pagesize pagesize; @@ -125,22 +125,20 @@ void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) * pulling further unwanted functions into the SPL. */ if (pagesize == 2048) { - total_pages = DIV_ROUND_UP(size, 2048); page = offs / 2048; + to_page = page + DIV_ROUND_UP(size, 2048); } else { - total_pages = DIV_ROUND_UP(size, 4096); page = offs / 4096; + to_page = page + DIV_ROUND_UP(size, 4096); } - for (; page <= total_pages; page++) { + for (; page <= to_page; page++) { block = page / ONENAND_PAGES_PER_BLOCK; rpage = page & (ONENAND_PAGES_PER_BLOCK - 1); ret = onenand_spl_read_page(block, rpage, addr, pagesize); - if (ret) { - total_pages += ONENAND_PAGES_PER_BLOCK; + if (ret) page += ONENAND_PAGES_PER_BLOCK - 1; - } else { + else addr += pagesize / 4; - } } } diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index db04795..93f8417 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -227,6 +227,9 @@ struct cpsw_priv { struct cpsw_slave *slaves; struct phy_device *phydev; struct mii_dev *bus; + + u32 mdio_link; + u32 phy_mask; }; static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits) @@ -598,10 +601,21 @@ static int cpsw_update_link(struct cpsw_priv *priv) for_each_slave(slave, priv) cpsw_slave_update_link(slave, priv, &link); - + priv->mdio_link = readl(&mdio_regs->link); return link; } +static int cpsw_check_link(struct cpsw_priv *priv) +{ + u32 link = 0; + + link = __raw_readl(&mdio_regs->link) & priv->phy_mask; + if ((link) && (link == priv->mdio_link)) + return 1; + + return cpsw_update_link(priv); +} + static inline u32 cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num) { if (priv->host_port == 0) @@ -631,6 +645,8 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv) cpsw_ale_port_state(priv, slave_port, ALE_PORT_STATE_FORWARD); cpsw_ale_add_mcast(priv, NetBcastAddr, 1 << slave_port); + + priv->phy_mask |= 1 << slave->data->phy_id; } static struct cpdma_desc *cpdma_desc_alloc(struct cpsw_priv *priv) @@ -862,7 +878,7 @@ static int cpsw_send(struct eth_device *dev, void *packet, int length) int len; int timeout = CPDMA_TIMEOUT; - if (!cpsw_update_link(priv)) + if (!cpsw_check_link(priv)) return -EIO; flush_dcache_range((unsigned long)packet, diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 5e8b648..de3f471 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -33,7 +33,6 @@ COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o COBJS-$(CONFIG_MCFUART) += mcfuart.o -COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c deleted file mode 100644 index 85fc68a..0000000 --- a/drivers/serial/ns9750_serial.c +++ /dev/null @@ -1,218 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_serial.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Serial driver for the NS9750. Only one UART is supported yet. - * @References: [1] NS9750 Hardware Reference/December 2003 - * @TODO: Implement Character GAP Timer when chip is fixed for PLL bypass - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#include <common.h> - -#include "ns9750_bbus.h" /* for GPIOs */ -#include "ns9750_ser.h" /* for serial configuration */ - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_CONS_INDEX) -#error "No console index specified." -#endif - -#define CONSOLE CONFIG_CONS_INDEX - -static unsigned int calcBitrateRegister( void ); -static unsigned int calcRxCharGapRegister( void ); - -static char cCharsAvailable; /* Numbers of chars in unCharCache */ -static unsigned int unCharCache; /* unCharCache is only valid if - * cCharsAvailable > 0 */ - -/*********************************************************************** - * @Function: serial_init - * @Return: 0 - * @Descr: configures GPIOs and UART. Requires BBUS Master Reset turned off - ***********************************************************************/ - -static int ns9750_serial_init(void) -{ - unsigned int aunGPIOTxD[] = { 0, 8, 40, 44 }; - unsigned int aunGPIORxD[] = { 1, 9, 41, 45 }; - - cCharsAvailable = 0; - - /* configure TxD and RxD pins for their special function */ - set_gpio_cfg_reg_val( aunGPIOTxD[ CONSOLE ], - NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_OUTPUT ); - set_gpio_cfg_reg_val( aunGPIORxD[ CONSOLE ], - NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_INPUT ); - - /* configure serial engine */ - *get_ser_reg_addr_channel( NS9750_SER_CTRL_A, CONSOLE ) = - NS9750_SER_CTRL_A_CE | - NS9750_SER_CTRL_A_STOP | - NS9750_SER_CTRL_A_WLS_8; - - serial_setbrg(); - - *get_ser_reg_addr_channel( NS9750_SER_CTRL_B, CONSOLE ) = - NS9750_SER_CTRL_B_RCGT; - - return 0; -} - -/*********************************************************************** - * @Function: serial_putc - * @Return: n/a - * @Descr: writes one character to the FIFO. Blocks until FIFO is not full - ***********************************************************************/ - -static void ns9750_serial_putc(const char c) -{ - if (c == '\n') - serial_putc( '\r' ); - - while (!(*get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE) & - NS9750_SER_STAT_A_TRDY ) ) { - /* do nothing, wait for characters in FIFO sent */ - } - - *(volatile char*) get_ser_reg_addr_channel( NS9750_SER_FIFO, - CONSOLE) = c; -} - -/*********************************************************************** - * @Function: serial_getc - * @Return: the character read - * @Descr: performs only 8bit accesses to the FIFO. No error handling - ***********************************************************************/ - -static int ns9750_serial_getc(void) -{ - int i; - - while (!serial_tstc() ) { - /* do nothing, wait for incoming characters */ - } - - /* at least one character in unCharCache */ - i = (int) (unCharCache & 0xff); - - unCharCache >>= 8; - cCharsAvailable--; - - return i; -} - -/*********************************************************************** - * @Function: serial_tstc - * @Return: 0 if no input available, otherwise != 0 - * @Descr: checks for incoming FIFO not empty. Stores the incoming chars in - * unCharCache and the numbers of characters in cCharsAvailable - ***********************************************************************/ - -static int ns9750_serial_tstc(void) -{ - unsigned int unRegCache; - - if ( cCharsAvailable ) - return 1; - - unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,CONSOLE ); - if( unRegCache & NS9750_SER_STAT_A_RBC ) { - *get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE ) = - NS9750_SER_STAT_A_RBC; - unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A, - CONSOLE ); - } - - if ( unRegCache & NS9750_SER_STAT_A_RRDY ) { - cCharsAvailable = (unRegCache & NS9750_SER_STAT_A_RXFDB_MA)>>20; - if ( !cCharsAvailable ) - cCharsAvailable = 4; - - unCharCache = *get_ser_reg_addr_channel( NS9750_SER_FIFO, - CONSOLE ); - return 1; - } - - /* no chars available */ - return 0; -} - -static void ns9750_serial_setbrg(void) -{ - *get_ser_reg_addr_channel( NS9750_SER_BITRATE, CONSOLE ) = - calcBitrateRegister(); - *get_ser_reg_addr_channel( NS9750_SER_RX_CHAR_TIMER, CONSOLE ) = - calcRxCharGapRegister(); -} - -/*********************************************************************** - * @Function: calcBitrateRegister - * @Return: value for the serial bitrate register - * @Descr: register value depends on clock frequency and baudrate - ***********************************************************************/ - -static unsigned int calcBitrateRegister( void ) -{ - return ( NS9750_SER_BITRATE_EBIT | - NS9750_SER_BITRATE_CLKMUX_BCLK | - NS9750_SER_BITRATE_TMODE | - NS9750_SER_BITRATE_TCDR_16 | - NS9750_SER_BITRATE_RCDR_16 | - ( ( ( ( CONFIG_SYS_CLK_FREQ / 8 ) / /* BBUS clock,[1] Fig. 38 */ - ( gd->baudrate * 16 ) ) - 1 ) & - NS9750_SER_BITRATE_N_MA ) ); -} - -/*********************************************************************** - * @Function: calcRxCharGapRegister - * @Return: value for the character gap timer register - * @Descr: register value depends on clock frequency and baudrate. Currently 0 - * is used as there is a bug with the gap timer in PLL bypass mode. - ***********************************************************************/ - -static unsigned int calcRxCharGapRegister( void ) -{ - return NS9750_SER_RX_CHAR_TIMER_TRUN; -} - -static struct serial_device ns9750_serial_drv = { - .name = "ns9750_serial", - .start = ns9750_serial_init, - .stop = NULL, - .setbrg = ns9750_serial_setbrg, - .putc = ns9750_serial_putc, - .puts = default_serial_puts, - .getc = ns9750_serial_getc, - .tstc = ns9750_serial_tstc, -}; - -void ns9750_serial_initialize(void) -{ - serial_register(&ns9750_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &ns9750_serial_drv; -} diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 1f8955a..7922bf0 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -164,7 +164,6 @@ serial_initfunc(altera_serial_initialize); serial_initfunc(atmel_serial_initialize); serial_initfunc(lpc32xx_serial_initialize); serial_initfunc(mcf_serial_initialize); -serial_initfunc(ns9750_serial_initialize); serial_initfunc(oc_serial_initialize); serial_initfunc(s3c64xx_serial_initialize); serial_initfunc(sandbox_serial_initialize); @@ -259,7 +258,6 @@ void serial_initialize(void) atmel_serial_initialize(); lpc32xx_serial_initialize(); mcf_serial_initialize(); - ns9750_serial_initialize(); oc_serial_initialize(); s3c64xx_serial_initialize(); sandbox_serial_initialize(); diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c index b1424bf..6efba12 100644 --- a/drivers/video/omap3_dss.c +++ b/drivers/video/omap3_dss.c @@ -121,7 +121,7 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg) if (!panel_cfg->frame_buffer) return; - writel(8 << GFX_FORMAT_SHIFT | GFX_ENABLE, &dispc->gfx_attributes); + writel(panel_cfg->gfx_format | GFX_ENABLE, &dispc->gfx_attributes); writel(1, &dispc->gfx_row_inc); writel(1, &dispc->gfx_pixel_inc); writel(panel_cfg->lcd_size, &dispc->gfx_size); diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 33ee2c4..709c1f3 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -35,6 +35,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM #define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -49,6 +50,7 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x80F80000\0" \ @@ -61,12 +63,38 @@ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandsrcaddr=0x280000\0" \ + "nandimgsize=0x500000\0" \ + "rootpath=/export/rootfs\0" \ + "nfsopts=nolock\0" \ + "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ + "::off\0" \ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "spiroot=/dev/mtdblock4 rw\0" \ + "spirootfstype=jffs2\0" \ + "spisrcaddr=0xe0000\0" \ + "spiimgsize=0x362000\0" \ + "spibusno=0\0" \ + "spiargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${spiroot} " \ + "rootfstype=${spirootfstype}\0" \ + "netargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ + "ip=dhcp\0" \ "bootenv=uEnv.txt\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ @@ -81,6 +109,21 @@ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \ + "bootm ${loadaddr}\0" \ + "spiboot=echo Booting from spi ...; " \ + "run spiargs; " \ + "sf probe ${spibusno}:0; " \ + "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ + "bootm ${loadaddr}\0" \ + "netboot=echo Booting from network ...; " \ + "setenv autoload no; " \ + "dhcp; " \ + "tftp ${loadaddr} ${bootfile}; " \ + "run netargs; " \ + "bootm ${loadaddr}\0" \ "ramboot=echo Booting from ramdisk ...; " \ "run ramargs; " \ "bootm ${loadaddr}\0" \ @@ -92,6 +135,8 @@ "if test $board_name = A335X_SK; then " \ "setenv fdtfile am335x-evmsk.dtb; fi\0" \ +#endif + #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ @@ -106,6 +151,8 @@ "if run loaduimage; then " \ "run mmcboot;" \ "fi;" \ + "else " \ + "run nandboot;" \ "fi;" \ /* Clock Defines */ @@ -237,8 +284,8 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000 +#define CONFIG_SPL_MUSB_NEW_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_BOARD_INIT @@ -312,8 +359,38 @@ #ifdef CONFIG_MUSB_GADGET #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" #endif /* CONFIG_MUSB_GADGET */ +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) +/* disable host part of MUSB in SPL */ +#undef CONFIG_MUSB_HOST +/* + * Disable CPSW SPL support so we fit within the 101KiB limit. + */ +#undef CONFIG_SPL_ETH_SUPPORT +#endif + +/* + * Default to using SPI for environment, etc. We have multiple copies + * of SPL as the ROM will check these locations. + * 0x0 - 0x20000 : First copy of SPL + * 0x20000 - 0x40000 : Second copy of SPL + * 0x40000 - 0x60000 : Third copy of SPL + * 0x60000 - 0x80000 : Fourth copy of SPL + * 0x80000 - 0xDF000 : U-Boot + * 0xDF000 - 0xE0000 : U-Boot Environment + * 0xE0000 - 0x442000 : Linux Kernel + * 0x442000 - 0x800000 : Userland + */ +#if defined(CONFIG_SPI_BOOT) +# undef CONFIG_ENV_IS_NOWHERE +# define CONFIG_ENV_IS_IN_SPI_FLASH +# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ +# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ +#endif /* SPI support */ + /* Unsupported features */ #undef CONFIG_USE_IRQ @@ -346,10 +423,12 @@ /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#if !defined(CONFIG_SPI_BOOT) #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #endif +#endif #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 943b658..8d79ffd 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -331,9 +331,18 @@ #define STATUS_LED_BOOT STATUS_LED_BIT #define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ +#define CONFIG_SPLASHIMAGE_GUARD + /* GPIO banks */ #ifdef CONFIG_STATUS_LED #define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ #endif +/* Display Configuration */ +#define CONFIG_OMAP3_GPIO_2 +#define CONFIG_VIDEO_OMAP3 +#define LCD_BPP LCD_COLOR16 + +#define CONFIG_LCD + #endif /* __CONFIG_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h new file mode 100644 index 0000000..10a493995 --- /dev/null +++ b/include/configs/dra7xx_evm.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated. + * Lokesh Vutla <lokeshvutla@ti.com> + * + * Configuration settings for the TI DRA7XX board. + * See omap5_common.h for omap5 common settings. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_DRA7XX_EVM_H +#define __CONFIG_DRA7XX_EVM_H + +#include <configs/omap5_common.h> + +#define CONFIG_DRA7XX /* in a TI DRA7XX core */ +#define CONFIG_SYS_PROMPT "DRA752 EVM # " + +#endif /* __CONFIG_DRA7XX_EVM_H */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index a8c08e8..90fc7c5 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -42,6 +42,7 @@ #define CONFIG_MACH_DAVINCI_DA850_EVM #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 0e7f924..559e375 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -36,6 +36,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/omap3.h> +#include <asm/mach-types.h> /* * Display CPU and Board information @@ -86,7 +87,10 @@ #define CONFIG_DOS_PARTITION 1 /* define to enable boot progress via leds */ +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ + (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) #define CONFIG_SHOW_BOOT_PROGRESS +#endif /* USB */ #define CONFIG_MUSB_UDC 1 @@ -118,7 +122,8 @@ #ifdef CONFIG_BOOT_NAND #define CONFIG_CMD_NAND #endif -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ + (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #endif #define CONFIG_CMD_DHCP diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h deleted file mode 100644 index 3f49c6f..0000000 --- a/include/configs/ns9750dev.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * Markus Pietrek <mpietrek@fsforth.de> - * - * Configuation settings for the NetSilicon NS9750 DevBoard - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */ -#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */ - -#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2) -#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4) -#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8) - -/*@TODO #define CONFIG_STATUS_LED*/ -#define CONFIG_USE_IRQ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NS9750_UART 1 /* use on-chip UART */ - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 /* Port B */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 3 -/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ - -#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.42.30 -#define CONFIG_SERVERIP 192.168.42.1 - -/*#define CONFIG_BOOTFILE "elinos-lart" */ -/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "NS9750DEV # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */ - -#define CONFIG_SYS_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */ - -#define CONFIG_SYS_HZ (CPU_CLK_FREQ/64) - -#define NS9750_ETH_PHY_ADDRESS (0x0000) - -/*----------------------------------------------------------------------- - * Stack sizes - */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -/* TODO */ -#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ -#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */ - -#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* @TODO*/ -#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -#if 0 -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -#endif - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* @TODO */ -/*#define CONFIG_ENV_IS_IN_FLASH 1*/ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ - -#ifdef CONFIG_STATUS_LED - -extern void __led_init(led_id_t mask, int state); -extern void __led_toggle(led_id_t mask); -extern void __led_set(led_id_t mask, int state); - -#endif /* CONFIG_STATUS_LED */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 59255c4..48ce4c0 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -53,7 +53,8 @@ #define CONFIG_MISC_INIT_R -#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 07de565..376a3d0 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -90,9 +90,9 @@ /* * select serial console configuration */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#define CONFIG_SERIAL1 1 /* UART1 */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ @@ -102,6 +102,10 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 +/* silent console by default */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 +#define CONFIG_SILENT_CONSOLE 1 + /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 @@ -152,19 +156,23 @@ /* Environment information */ #undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */ -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 0 +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "S" #define CONFIG_EXTRA_ENV_SETTINGS \ + "silent=true\0" \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ + "console=ttyO0,115200n8\0" \ "mpurate=600\0" \ "vram=12M\0" \ "dvimode=1024x768-24@60\0" \ "defaultdisplay=dvi\0" \ - "fpgafilename=mvbluelynx_x.rbf\0" \ - "loadfpga=if fatload mmc ${mmcdev} ${loadaddr} ${fpgafilename}; then " \ - "fpga load 0 ${loadaddr} ${filesize}; " \ + "loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\ + "/lib/firmware/mvblx/${fpgafilename}; then " \ + "fpga load 0 ${loadaddr} ${filesize}; " \ "fi;\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ @@ -177,6 +185,7 @@ "omapdss.def_disp=${defaultdisplay} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype} " \ + "mvfw.fpgavers=${fpgavers} " \ "${cmdline_suffix}\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc ...; " \ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 180cb24..6ae6a0f 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -52,7 +52,7 @@ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 - +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h new file mode 100644 index 0000000..af97564 --- /dev/null +++ b/include/configs/omap5_common.h @@ -0,0 +1,262 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated. + * Sricharan R <r.sricharan@ti.com> + * + * Derived from OMAP4 done by: + * Aneesh V <aneesh@ti.com> + * + * TI OMAP5 AND DRA7XX common configuration settings + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_OMAP5_COMMON_H +#define __CONFIG_OMAP5_COMMON_H + +/* + * High Level Configuration Options + */ +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_OMAP54XX /* which is a 54XX */ +#define CONFIG_OMAP_GPIO + +/* Get CPU defs */ +#include <asm/arch/cpu.h> +#include <asm/arch/omap.h> + +/* Display CPU and Board Info */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 19200000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + * Total Size Environment - 128k + * Malloc - add 256k + */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) +/* Vector Base */ +#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE + +/* + * Hardware drivers + */ + +/* + * serial port - NS16550 compatible + */ +#define V_NS16550_CLK 48000000 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 UART3_BASE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +/* I2C */ +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP34XX_I2C +#define CONFIG_I2C_MULTI_BUS + + +/* MMC */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* MMC ENV related defines */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ +#define CONFIG_ENV_OFFSET 0xE0000 +#define CONFIG_CMD_SAVEENV + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Cache */ +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_CACHELINE_SHIFT 6 + +/* commands to include */ +#include <config_cmd_default.h> + +/* Enabled commands */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_SAVEENV + +/* Disabled commands */ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +/* + * Environment setup + */ + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyO2,115200n8\0" \ + "usbtty=cdc_acm\0" \ + "vram=16M\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "vram=${vram} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi" + +#define CONFIG_AUTO_COMPLETE 1 + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* + * memtest setup + */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x80000000 + +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT2_BASE +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * SDRAM Memory Map + * Even though we use two CS all the memory + * is mapped to one contiguous block + */ +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + +/* Defines for SDRAM init */ +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40300350 +#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SPL_DISPLAY_PRINT + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 80E7FFC0--0x80E80000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80E80000 + +/* + * BSS and malloc area 64MB into memory to allow enough + * space for the kernel at the beginning of memory + */ +#define CONFIG_SPL_BSS_START_ADDR 0x84000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SPL_GPIO_SUPPORT + +#endif /* __CONFIG_OMAP5_COMMON_H */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index 623da77..22a8e13 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -1,12 +1,10 @@ /* - * (C) Copyright 2010 + * (C) Copyright 2013 * Texas Instruments Incorporated. * Sricharan R <r.sricharan@ti.com> * - * Derived from OMAP4 done by: - * Aneesh V <aneesh@ti.com> - * * Configuration settings for the TI EVM5430 board. + * See omap5_common.h for omap5 common settings. * * See file CREDITS for list of people who contributed to this * project. @@ -27,242 +25,16 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP54XX /* which is a 54XX */ -#define CONFIG_OMAP5430 /* which is in a 5430 */ -#define CONFIG_5430EVM /* working with EVM */ -#define CONFIG_OMAP_GPIO - -/* Get CPU defs */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> - -/* Display CPU and Board Info */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* Clock Defines */ -#define V_OSCK 19200000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - * Total Size Environment - 128k - * Malloc - add 256k - */ -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE - -/* - * Hardware drivers - */ - -/* - * serial port - NS16550 compatible - */ -#define V_NS16550_CLK 48000000 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 UART3_BASE +#ifndef __CONFIG_OMAP5_EVM_H +#define __CONFIG_OMAP5_EVM_H -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -/* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C -#define CONFIG_I2C_MULTI_BUS +#include <configs/omap5_common.h> /* TWL6035 */ #ifndef CONFIG_SPL_BUILD #define CONFIG_TWL6035_POWER #endif -/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* MMC ENV related defines */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ -#define CONFIG_ENV_OFFSET 0xE0000 -#define CONFIG_CMD_SAVEENV - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Cache */ -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_CACHELINE_SHIFT 6 - -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_SAVEENV - -/* Disabled commands */ -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ - -/* - * Environment setup - */ - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "OMAP5430 EVM # " -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -/* Defines for SDRAM init */ -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SPL_DISPLAY_PRINT - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - -/* - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 80E7FFC0--0x80E80000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80E80000 - -/* - * BSS and malloc area 64MB into memory to allow enough - * space for the kernel at the beginning of memory - */ -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#endif /* __CONFIG_H */ +#endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 18fd76f..2989e72 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -58,6 +58,11 @@ #define CONFIG_ZYNQ_GEM #define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000 +#if defined(CONFIG_ZYNQ_DCC) +# define CONFIG_ARM_DCC +# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ +#endif + #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY diff --git a/include/env_callback.h b/include/env_callback.h index c583120..62428d1 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -41,6 +41,12 @@ #define SILENT_CALLBACK #endif +#ifdef CONFIG_SPLASHIMAGE_GUARD +#define SPLASHIMAGE_CALLBACK "splashimage:splashimage," +#else +#define SPLASHIMAGE_CALLBACK +#endif + /* * This list of callback bindings is static, but may be overridden by defining * a new association in the ".callbacks" environment variable. @@ -51,6 +57,7 @@ "bootfile:bootfile," \ "loadaddr:loadaddr," \ SILENT_CALLBACK \ + SPLASHIMAGE_CALLBACK \ "stdin:console,stdout:console,stderr:console," \ CONFIG_ENV_CALLBACK_LIST_STATIC diff --git a/include/lcd.h b/include/lcd.h index c24164a..4ac4ddd 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -47,6 +47,7 @@ extern struct vidinfo panel_info; extern void lcd_ctrl_init (void *lcdbase); extern void lcd_enable (void); +extern int board_splash_screen_prepare(void); /* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */ extern void lcd_setcolreg (ushort regno, diff --git a/include/mmc.h b/include/mmc.h index a13e2bd..de6d497 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -259,6 +259,7 @@ struct mmc { void (*set_ios)(struct mmc *mmc); int (*init)(struct mmc *mmc); int (*getcd)(struct mmc *mmc); + int (*getwp)(struct mmc *mmc); uint b_max; }; @@ -274,6 +275,7 @@ int get_mmc_num(void); int board_mmc_getcd(struct mmc *mmc); int mmc_switch_part(int dev_num, unsigned int part_num); int mmc_getcd(struct mmc *mmc); +int mmc_getwp(struct mmc *mmc); void spl_mmc_load(void) __noreturn; #ifdef CONFIG_GENERIC_MMC diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h deleted file mode 100644 index 9485338..0000000 --- a/include/ns9750_bbus.h +++ /dev/null @@ -1,125 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_bbus.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for BBus usage - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 10 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * - ***********************************************************************/ - -#ifndef FS_NS9750_BBUS_H -#define FS_NS9750_BBUS_H - -#define NS9750_BBUS_MODULE_BASE (0x90600000) - -#define get_bbus_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_BBUS_MODULE_BASE+(unsigned int) (c))) - -/* We have support for 50 GPIO pins */ - -#define get_gpio_cfg_reg_addr(pin) \ - get_bbus_reg_addr( NS9750_BBUS_GPIO_CFG_BASE + (((pin) >> 3) * 4) ) - -/* To Read/Modify/Write a pin configuration register, use it like - set_gpio_cfg_reg_val( 12, NS9750_GPIO_CFG_FUNC_GPIO|NS9750_GPIO_CFG_OUTPUT ); - They should be wrapped by cli()/sti() */ -#define set_gpio_cfg_reg_val(pin,cfg) \ - *get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \ - ~NS9750_GPIO_CFG_MASK((pin))) |\ - NS9750_GPIO_CFG_VAL((pin),(cfg)); - -#define NS9750_GPIO_CFG_MASK(pin) (NS9750_GPIO_CFG_VAL(pin, \ - NS9750_GPIO_CFG_MA)) -#define NS9750_GPIO_CFG_VAL(pin,cfg) ((cfg) << (((pin) % 8) * 4)) - -#define NS9750_GPIO_CFG_MA (0x0F) -#define NS9750_GPIO_CFG_INPUT (0x00) -#define NS9750_GPIO_CFG_OUTPUT (0x08) -#define NS9750_GPIO_CFG_FUNC_GPIO (0x03) -#define NS9750_GPIO_CFG_FUNC_2 (0x02) -#define NS9750_GPIO_CFG_FUNC_1 (0x01) -#define NS9750_GPIO_CFG_FUNC_0 (0x00) - -/* the register addresses */ - -#define NS9750_BBUS_MASTER_RESET (0x00) -#define NS9750_BBUS_GPIO_CFG_BASE (0x10) -#define NS9750_BBUS_GPIO_CTRL_BASE (0x30) -#define NS9750_BBUS_GPIO_STAT_BASE (0x40) -#define NS9750_BBUS_MONITOR (0x50) -#define NS9750_BBUS_DMA_INT_STAT (0x60) -#define NS9750_BBUS_DMA_INT_ENABLE (0x64) -#define NS9750_BBUS_USB_CFG (0x70) -#define NS9750_BBUS_ENDIAN_CFG (0x80) -#define NS9750_BBUS_ARM_WAKE_UP (0x90) - -/* register bit fields */ - -#define NS9750_BBUS_MASTER_RESET_UTIL (0x00000100) -#define NS9750_BBUS_MASTER_RESET_I2C (0x00000080) -#define NS9750_BBUS_MASTER_RESET_1284 (0x00000040) -#define NS9750_BBUS_MASTER_RESET_SER4 (0x00000020) -#define NS9750_BBUS_MASTER_RESET_SER3 (0x00000010) -#define NS9750_BBUS_MASTER_RESET_SER2 (0x00000008) -#define NS9750_BBUS_MASTER_RESET_SER1 (0x00000004) -#define NS9750_BBUS_MASTER_RESET_USB (0x00000002) -#define NS9750_BBUS_MASTER_RESET_DMA (0x00000001) - -/* BS9750_BBUS_DMA_INT_BINT* are valid for *DMA_INT_STAT and *DMA_INT_ENABLE */ - -#define NS9750_BBUS_DMA_INT_BINT16 (0x00010000) -#define NS9750_BBUS_DMA_INT_BINT15 (0x00008000) -#define NS9750_BBUS_DMA_INT_BINT14 (0x00004000) -#define NS9750_BBUS_DMA_INT_BINT13 (0x00002000) -#define NS9750_BBUS_DMA_INT_BINT12 (0x00001000) -#define NS9750_BBUS_DMA_INT_BINT11 (0x00000800) -#define NS9750_BBUS_DMA_INT_BINT10 (0x00000400) -#define NS9750_BBUS_DMA_INT_BINT9 (0x00000200) -#define NS9750_BBUS_DMA_INT_BINT8 (0x00000100) -#define NS9750_BBUS_DMA_INT_BINT7 (0x00000080) -#define NS9750_BBUS_DMA_INT_BINT6 (0x00000040) -#define NS9750_BBUS_DMA_INT_BINT5 (0x00000020) -#define NS9750_BBUS_DMA_INT_BINT4 (0x00000010) -#define NS9750_BBUS_DMA_INT_BINT3 (0x00000008) -#define NS9750_BBUS_DMA_INT_BINT2 (0x00000004) -#define NS9750_BBUS_DMA_INT_BINT1 (0x00000002) -#define NS9750_BBUS_DMA_INT_BINT0 (0x00000001) - -#define NS9750_BBUS_USB_CFG_OUTEN (0x00000008) -#define NS9750_BBUS_USB_CFG_SPEED (0x00000004) -#define NS9750_BBUS_USB_CFG_CFG_MA (0x00000003) -#define NS9750_BBUS_USB_CFG_CFG_HOST_SOFT (0x00000003) -#define NS9750_BBUS_USB_CFG_CFG_DEVICE (0x00000002) -#define NS9750_BBUS_USB_CFG_CFG_HOST (0x00000001) -#define NS9750_BBUS_USB_CFG_CFG_DIS (0x00000000) - -#define NS9750_BBUS_ENDIAN_CFG_AHBM (0x00001000) -#define NS9750_BBUS_ENDIAN_CFG_I2C (0x00000080) -#define NS9750_BBUS_ENDIAN_CFG_IEEE1284 (0x00000040) -#define NS9750_BBUS_ENDIAN_CFG_SER4 (0x00000020) -#define NS9750_BBUS_ENDIAN_CFG_SER3 (0x00000010) -#define NS9750_BBUS_ENDIAN_CFG_SER2 (0x00000008) -#define NS9750_BBUS_ENDIAN_CFG_SER1 (0x00000004) -#define NS9750_BBUS_ENDIAN_CFG_USB (0x00000002) -#define NS9750_BBUS_ENDIAN_CFG_DMA (0x00000001) - -#endif /* FS_NS9750_BBUS_H */ diff --git a/include/ns9750_mem.h b/include/ns9750_mem.h deleted file mode 100644 index 666e412..0000000 --- a/include/ns9750_mem.h +++ /dev/null @@ -1,172 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_mem.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for Memory Control Module - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 5 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_MEM_H -#define FS_NS9750_SYS_H - -#define NS9750_MEM_MODULE_BASE (0xA0700000) - -#define get_mem_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_MEM_MODULE_BASE+(unsigned int) (c))) - -/* the register addresses */ - -#define NS9750_MEM_CTRL (0x0000) -#define NS9750_MEM_STATUS (0x0004) -#define NS9750_MEM_CFG (0x0008) -#define NS9750_MEM_DYN_CTRL (0x0020) -#define NS9750_MEM_DYN_REFRESH (0x0024) -#define NS9750_MEM_DYN_READ_CFG (0x0028) -#define NS9750_MEM_DYN_TRP (0x0030) -#define NS9750_MEM_DYN_TRAS (0x0034) -#define NS9750_MEM_DYN_TSREX (0x0038) -#define NS9750_MEM_DYN_TAPR (0x003C) -#define NS9750_MEM_DYN_TDAL (0x0040) -#define NS9750_MEM_DYN_TWR (0x0044) -#define NS9750_MEM_DYN_TRC (0x0048) -#define NS9750_MEM_DYN_TRFC (0x004C) -#define NS9750_MEM_DYN_TXSR (0x0050) -#define NS9750_MEM_DYN_TRRD (0x0054) -#define NS9750_MEM_DYN_TMRD (0x0058) -#define NS9750_MEM_STAT_EXT_WAIT (0x0080) -#define NS9750_MEM_DYN_CFG_BASE (0x0100) -#define NS9750_MEM_DYN_RAS_CAS_BASE (0x0104) -#define NS9750_MEM_STAT_CFG_BASE (0x0200) -#define NS9750_MEM_STAT_WAIT_WEN_BASE (0x0204) -#define NS9750_MEM_STAT_WAIT_OEN_BASE (0x0208) -#define NS9750_MEM_STAT_WAIT_RD_BASE (0x020C) -#define NS9750_MEM_STAT_WAIT_PAGE_BASE (0x0210) -#define NS9750_MEM_STAT_WAIR_WR_BASE (0x0214) -#define NS9750_MEM_STAT_WAIT_TURN_BASE (0x0218) - -/* the vectored register addresses */ - -#define NS9750_MEM_DYN_CFG(c) (NS9750_MEM_DYN_CFG_BASE + (c)*0x20) -#define NS9750_MEM_DYN_RAS_CAS(c) (NS9750_MEM_DYN_RAS_CAS_BASE + (c)*0x20) -#define NS9750_MEM_STAT_CFG(c) (NS9750_MEM_STAT_CFG_BASE + (c)*0x20) -#define NS9750_MEM_STAT_WAIT_WEN(c) (NS9750_MEM_STAT_WAIT_WEN_BASE+(c)*0x20) -#define NS9750_MEM_STAT_WAIT_OEN(c) (NS9750_MEM_STAT_WAIT_OEN_BASE+(c)*0x20) -#define NS9750_MEM_STAT_RD(c) (NS9750_MEM_STAT_WAIT_RD_BASE+(c)*0x20) -#define NS9750_MEM_STAT_PAGE(c) (NS9750_MEM_STAT_WAIT_PAGE_BASE+(c)*0x20) -#define NS9750_MEM_STAT_WR(c) (NS9750_MEM_STAT_WAIT_WR_BASE+(c)*0x20) -#define NS9750_MEM_STAT_TURN(c) (NS9750_MEM_STAT_WAIT_TURN_BASE+(c)*0x20) - -/* register bit fields */ - -#define NS9750_MEM_CTRL_L (0x00000004) -#define NS9750_MEM_CTRL_M (0x00000002) -#define NS9750_MEM_CTRL_E (0x00000001) - -#define NS9750_MEM_STAT_SA (0x00000004) -#define NS9750_MEM_STAT_S (0x00000002) -#define NS9750_MEM_STAT_B (0x00000001) - -#define NS9750_MEM_CFG_CLK (0x00000010) -#define NS9750_MEM_CFG_N (0x00000001) - -#define NS9750_MEM_DYN_CTRL_NRP (0x00004000) -#define NS9750_MEM_DYN_CTRL_DP (0x00002000) -#define NS9750_MEM_DYN_CTRL_I_MA (0x00000180) -#define NS9750_MEM_DYN_CTRL_I_NORMAL (0x00000000) -#define NS9750_MEM_DYN_CTRL_I_MODE (0x00000080) -#define NS9750_MEM_DYN_CTRL_I_PALL (0x00000100) -#define NS9750_MEM_DYN_CTRL_I_NOP (0x00000180) -#define NS9750_MEM_DYN_CTRL_SR (0x00000002) -#define NS9750_MEM_DYN_CTRL_CE (0x00000001) - - -#define NS9750_MEM_DYN_REFRESH_MA (0x000007FF) - -#define NS9750_MEM_DYN_READ_CFG_MA (0x00000003) -#define NS9750_MEM_DYN_READ_CFG_DELAY0 (0x00000001) -#define NS9750_MEM_DYN_READ_CFG_DELAY1 (0x00000002) -#define NS9750_MEM_DYN_READ_CFG_DELAY2 (0x00000003) - -#define NS9750_MEM_DYN_TRP_MA (0x0000000F) - -#define NS9750_MEM_DYN_TRAS_MA (0x0000000F) - -#define NS9750_MEM_DYN_TSREX_MA (0x0000000F) - -#define NS9750_MEM_DYN_TAPR_MA (0x0000000F) - -#define NS9750_MEM_DYN_TDAL_MA (0x0000000F) - -#define NS9750_MEM_DYN_TWR_MA (0x0000000F) - -#define NS9750_MEM_DYN_TRC_MA (0x0000001F) - -#define NS9750_MEM_DYN_TRFC_MA (0x0000001F) - -#define NS9750_MEM_DYN_TXSR_MA (0x0000001F) - -#define NS9750_MEM_DYN_TRRD_MA (0x0000000F) - -#define NS9750_MEM_DYN_TMRD_MA (0x0000000F) - -#define NS9750_MEM_STAT_EXTW_WAIT_MA (0x0000003F) - -#define NS9750_MEM_DYN_CFG_P (0x00100000) -#define NS9750_MEM_DYN_CFG_BDMC (0x00080000) -#define NS9750_MEM_DYN_CFG_AM (0x00004000) -#define NS9750_MEM_DYN_CFG_AM_MA (0x00001F80) -#define NS9750_MEM_DYN_CFG_MD (0x00000018) - -#define NS9750_MEM_DYN_RAS_CAS_CAS_MA (0x00000300) -#define NS9750_MEM_DYN_RAS_CAS_CAS_1 (0x00000100) -#define NS9750_MEM_DYN_RAS_CAS_CAS_2 (0x00000200) -#define NS9750_MEM_DYN_RAS_CAS_CAS_3 (0x00000300) -#define NS9750_MEM_DYN_RAS_CAS_RAS_MA (0x00000003) -#define NS9750_MEM_DYN_RAS_CAS_RAS_1 (0x00000001) -#define NS9750_MEM_DYN_RAS_CAS_RAS_2 (0x00000002) -#define NS9750_MEM_DYN_RAS_CAS_RAS_3 (0x00000003) - -#define NS9750_MEM_STAT_CFG_PSMC (0x00100000) -#define NS9750_MEM_STAT_CFG_BSMC (0x00080000) -#define NS9750_MEM_STAT_CFG_EW (0x00000100) -#define NS9750_MEM_STAT_CFG_PB (0x00000080) -#define NS9750_MEM_STAT_CFG_PC (0x00000040) -#define NS9750_MEM_STAT_CFG_PM (0x00000008) -#define NS9750_MEM_STAT_CFG_MW_MA (0x00000003) -#define NS9750_MEM_STAT_CFG_MW_8 (0x00000000) -#define NS9750_MEM_STAT_CFG_MW_16 (0x00000001) -#define NS9750_MEM_STAT_CFG_MW_32 (0x00000002) - -#define NS9750_MEM_STAT_WAIT_WEN_MA (0x0000000F) - -#define NS9750_MEM_STAT_WAIT_OEN_MA (0x0000000F) - -#define NS9750_MEM_STAT_WAIT_RD_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_PAGE_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_WR_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_TURN_MA (0x0000000F) - - -#endif /* FS_NS9750_MEM_H */ diff --git a/include/ns9750_ser.h b/include/ns9750_ser.h deleted file mode 100644 index b5c297e..0000000 --- a/include/ns9750_ser.h +++ /dev/null @@ -1,202 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_ser.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @References: [1] NS9750 Hardware Reference, December 2003 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_SER_H -#define FS_NS9750_SER_H - -#define NS9750_SER_MODULE_BASE (0x90200000) - -#define get_ser_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_SER_MODULE_BASE+(unsigned int) (c))) - -#define get_ser_reg_addr_channel(reg,chan) \ - get_ser_reg_addr((reg)+(((chan)<2)?0:0x00100000)+(((chan)&1)?0x40:0)) - -/* the register addresses */ - -#define NS9750_SER_CTRL_A (0x00) -#define NS9750_SER_CTRL_B (0x04) -#define NS9750_SER_STAT_A (0x08) -#define NS9750_SER_BITRATE (0x0C) -#define NS9750_SER_FIFO (0x10) -#define NS9750_SER_RX_BUF_TIMER (0x14) -#define NS9750_SER_RX_CHAR_TIMER (0x18) -#define NS9750_SER_RX_MATCH (0x1C) -#define NS9750_SER_RX_MATCH_MASK (0x20) -#define NS9750_SER_FLOW_CTRL (0x34) -#define NS9750_SER_FLOW_CTRL_FORCE (0x38) - -/* register bit fields */ - -/* control A register */ - -#define NS9750_SER_CTRL_A_CE (0x80000000) -#define NS9750_SER_CTRL_A_BRK (0x40000000) -#define NS9750_SER_CTRL_A_STICKP (0x20000000) -#define NS9750_SER_CTRL_A_EPS (0x10000000) -#define NS9750_SER_CTRL_A_PE (0x08000000) -#define NS9750_SER_CTRL_A_STOP (0x04000000) -#define NS9750_SER_CTRL_A_WLS_MA (0x03000000) -#define NS9750_SER_CTRL_A_WLS_5 (0x00000000) -#define NS9750_SER_CTRL_A_WLS_6 (0x01000000) -#define NS9750_SER_CTRL_A_WLS_7 (0x02000000) -#define NS9750_SER_CTRL_A_WLS_8 (0x03000000) -#define NS9750_SER_CTRL_A_CTSTX (0x00800000) -#define NS9750_SER_CTRL_A_RTSRX (0x00400000) -#define NS9750_SER_CTRL_A_RL (0x00200000) -#define NS9750_SER_CTRL_A_LL (0x00100000) -#define NS9750_SER_CTRL_A_RES (0x000CF000) -#define NS9750_SER_CTRL_A_DTR (0x00020000) -#define NS9750_SER_CTRL_A_RTS (0x00010000) -#define NS9750_SER_CTRL_A_RIE_MA (0x00000E00) -#define NS9750_SER_CTRL_A_ERXDMA (0x00000100) -#define NS9750_SER_CTRL_A_RIC_MA (0x000000E0) -#define NS9750_SER_CTRL_A_TIC_MA (0x0000001E) -#define NS9750_SER_CTRL_A_ETXDMA (0x00000001) - -/* control B register */ - -#define NS9750_SER_CTRL_B_RDM1 (0x80000000) -#define NS9750_SER_CTRL_B_RDM2 (0x40000000) -#define NS9750_SER_CTRL_B_RDM3 (0x20000000) -#define NS9750_SER_CTRL_B_RDM4 (0x10000000) -#define NS9750_SER_CTRL_B_RBGT (0x08000000) -#define NS9750_SER_CTRL_B_RCGT (0x04000000) -#define NS9750_SER_CTRL_B_MODE_MA (0x00300000) -#define NS9750_SER_CTRL_B_MODE_UART (0x00000000) -#define NS9750_SER_CTRL_B_MODE_HDLC (0x00100000) -#define NS9750_SER_CTRL_B_MODE_SPI_M (0x00200000) -#define NS9750_SER_CTRL_B_MODE_SPI_S (0x00300000) -#define NS9750_SER_CTRL_B_BITORDR (0x00080000) -#define NS9750_SER_CTRL_B_RES (0x0007703F) -#define NS9750_SER_CTRL_B_RTSTX (0x00008000) -#define NS9750_SER_CTRL_B_ENDEC_MA (0x00000FC0) - -/* status A register */ - -#define NS9750_SER_STAT_A_MATCH1 (0x80000000) -#define NS9750_SER_STAT_A_MATCH2 (0x40000000) -#define NS9750_SER_STAT_A_MATCH3 (0x20000000) -#define NS9750_SER_STAT_A_MATCH4 (0x10000000) -#define NS9750_SER_STAT_A_BGAP (0x08000000) -#define NS9750_SER_STAT_A_CGAP (0x04000000) -#define NS9750_SER_STAT_A_RXFDB_MA (0x00300000) -#define NS9750_SER_STAT_A_RXFDB_FULL (0x00000000) -#define NS9750_SER_STAT_A_RXFDB_1 (0x00100000) -#define NS9750_SER_STAT_A_RXFDB_2 (0x00200000) -#define NS9750_SER_STAT_A_RXFDB_3 (0x00300000) -#define NS9750_SER_STAT_A_DCD (0x00080000) -#define NS9750_SER_STAT_A_RI (0x00040000) -#define NS9750_SER_STAT_A_DSR (0x00020000) -#define NS9750_SER_STAT_A_CTS (0x00010000) -#define NS9750_SER_STAT_A_RBRK (0x00008000) -#define NS9750_SER_STAT_A_RFE (0x00004000) -#define NS9750_SER_STAT_A_RPE (0x00002000) -#define NS9750_SER_STAT_A_ROVER (0x00001000) -#define NS9750_SER_STAT_A_RRDY (0x00000800) -#define NS9750_SER_STAT_A_RHALF (0x00000400) -#define NS9750_SER_STAT_A_RBC (0x00000200) -#define NS9750_SER_STAT_A_RFULL (0x00000100) -#define NS9750_SER_STAT_A_DCDI (0x00000080) -#define NS9750_SER_STAT_A_RII (0x00000040) -#define NS9750_SER_STAT_A_DSRI (0x00000020) -#define NS9750_SER_STAT_A_CTSI (0x00000010) -#define NS9750_SER_STAT_A_TRDY (0x00000008) -#define NS9750_SER_STAT_A_THALF (0x00000004) -#define NS9750_SER_STAT_A_TBC (0x00000002) -#define NS9750_SER_STAT_A_TEMPTY (0x00000001) - -#define NS9750_SER_STAT_A_RX_COND_ERR ( NS9750_SER_STAT_A_RFE | \ - NS9750_SER_STAT_A_ROVER | \ - NS9750_SER_STAT_A_RPE ) -#define NS9750_SER_STAT_A_RX_COND_ALL ( NS9750_SER_STAT_A_RX_COND_ERR | \ - NS9750_SER_STAT_A_RBRK | \ - NS9750_SER_STAT_A_RRDY | \ - NS9750_SER_STAT_A_RHALF | \ - NS9750_SER_STAT_A_RBC | \ - NS9750_SER_STAT_A_DCDI | \ - NS9750_SER_STAT_A_RII | \ - NS9750_SER_STAT_A_DSRI | \ - NS9750_SER_STAT_A_CTSI ) -#define NS9750_SER_STAT_A_TX_COND_ALL ( NS9750_SER_STAT_A_TRDY | \ - NS9750_SER_STAT_A_THALF | \ - NS9750_SER_STAT_A_TBC | \ - NS9750_SER_STAT_A_TEMPTY ) -/* bit rate register */ - -#define NS9750_SER_BITRATE_EBIT (0x80000000) -#define NS9750_SER_BITRATE_TMODE (0x40000000) -#define NS9750_SER_BITRATE_RXSRC (0x20000000) -#define NS9750_SER_BITRATE_TXSRC (0x10000000) -#define NS9750_SER_BITRATE_RXEXT (0x08000000) -#define NS9750_SER_BITRATE_TXEXT (0x04000000) -#define NS9750_SER_BITRATE_CLKMUX_MA (0x03000000) -#define NS9750_SER_BITRATE_CLKMUX_XTAL (0x00000000) -#define NS9750_SER_BITRATE_CLKMUX_BCLK (0x01000000) -#define NS9750_SER_BITRATE_CLKMUX_OUT1 (0x02000000) -#define NS9750_SER_BITRATE_CLKMUX_OUT2 (0x03000000) -#define NS9750_SER_BITRATE_TXCINV (0x00800000) -#define NS9750_SER_BITRATE_RXCINV (0x00400000) -#define NS9750_SER_BITRATE_TCDR_MA (0x00180000) -#define NS9750_SER_BITRATE_TCDR_1 (0x00000000) -#define NS9750_SER_BITRATE_TCDR_8 (0x00080000) -#define NS9750_SER_BITRATE_TCDR_16 (0x00100000) -#define NS9750_SER_BITRATE_TCDR_32 (0x00180000) -#define NS9750_SER_BITRATE_RCDR_MA (0x00070000) -#define NS9750_SER_BITRATE_RCDR_1 (0x00000000) -#define NS9750_SER_BITRATE_RCDR_8 (0x00020000) -#define NS9750_SER_BITRATE_RCDR_16 (0x00040000) -#define NS9750_SER_BITRATE_RCDR_32 (0x00060000) -#define NS9750_SER_BITRATE_TICS (0x00010000) -#define NS9750_SER_BITRATE_RICS (0x00008000) -#define NS9750_SER_BITRATE_N_MA (0x00007FFF) - -/* receive buffer gap timer */ - -#define NS9750_SER_RX_BUF_TIMER_TRUN (0x80000000) /* UART and SPI */ -#define NS9750_SER_RX_BUF_TIMER_BT_MA (0x0000FFFF) /* UART and SPI */ -#define NS9750_SER_RX_BUF_TIMER_MAXLEN_MA (0x0000FFFF) /* HDLC only */ - -/* receive character gap timer */ - -#define NS9750_SER_RX_CHAR_TIMER_TRUN (0x80000000) -#define NS9750_SER_RX_CHAR_TIMER_CT_MA (0x000FFFFF) - -/* receive match */ - -#define NS9750_SER_RX_MATCH_RDMB1_MA (0xFF000000) -#define NS9750_SER_RX_MATCH_RDMB2_MA (0x00FF0000) -#define NS9750_SER_RX_MATCH_RDMB3_MA (0x0000FF00) -#define NS9750_SER_RX_MATCH_RDMB4_MA (0x000000FF) - -/* receive match mask */ - -#define NS9750_SER_RX_MATCH_MASK_RDMB1_MA (0xFF000000) -#define NS9750_SER_RX_MATCH_MASK_RDMB2_MA (0x00FF0000) -#define NS9750_SER_RX_MATCH_MASK_RDMB3_MA (0x0000FF00) -#define NS9750_SER_RX_MATCH_MASK_RDMB4_MA (0x000000FF) - -#endif /* FS_NS9750_SER_H */ diff --git a/include/ns9750_sys.h b/include/ns9750_sys.h deleted file mode 100644 index f1dc2b2..0000000 --- a/include/ns9750_sys.h +++ /dev/null @@ -1,215 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_sys.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for SYS Control Module - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 4 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_SYS_H -#define FS_NS9750_SYS_H - -#define NS9750_SYS_MODULE_BASE (0xA0900000) - -#define get_sys_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_SYS_MODULE_BASE+(unsigned int) (c))) - -/* the register addresses */ - -#define NS9750_SYS_AHB_GEN (0x0000) -#define NS9750_SYS_BRC_BASE (0x0004) -#define NS9750_SYS_AHB_TIMEOUT (0x0014) -#define NS9750_SYS_AHB_ERROR1 (0x0018) -#define NS9750_SYS_AHB_ERROR2 (0x001C) -#define NS9750_SYS_AHB_MON (0x0020) -#define NS9750_SYS_TIMER_COUNT_BASE (0x0044) -#define NS9750_SYS_TIMER_READ_BASE (0x0084) -#define NS9750_SYS_INT_VEC_ADR_BASE (0x00C4) -#define NS9750_SYS_INT_CFG_BASE (0x0144) -#define NS9750_SYS_ISRADDR (0x0164) -#define NS9750_SYS_INT_STAT_ACTIVE (0x0168) -#define NS9750_SYS_INT_STAT_RAW (0x016C) -#define NS9750_SYS_TIMER_INT_STAT (0x0170) -#define NS9750_SYS_SW_WDOG_CFG (0x0174) -#define NS9750_SYS_SW_WDOG_TIMER (0x0178) -#define NS9750_SYS_CLOCK (0x017C) -#define NS9750_SYS_RESET (0x0180) -#define NS9750_SYS_MISC (0x0184) -#define NS9750_SYS_PLL (0x0188) -#define NS9750_SYS_ACT_INT_STAT (0x018C) -#define NS9750_SYS_TIMER_CTRL_BASE (0x0190) -#define NS9750_SYS_CS_DYN_BASE_BASE (0x01D0) -#define NS9750_SYS_CS_DYN_MASK_BASE (0x01D4) -#define NS9750_SYS_CS_STATIC_BASE_BASE (0x01F0) -#define NS9750_SYS_CS_STATIC_MASK_BASE (0x01F4) -#define NS9750_SYS_GEN_ID (0x0210) -#define NS9750_SYS_EXT_INT_CTRL_BASE (0x0214) - -/* the vectored register addresses */ - -#define NS9750_SYS_TIMER_COUNT(c) (NS9750_SYS_TIMER_COUNT_BASE + (c)) -#define NS9750_SYS_TIMER_READ(c) (NS9750_SYS_TIMER_READ_BASE + (c)) -#define NS9750_SYS_INT_VEC_ADR(c) (NS9750_SYS_INT_VEC_ADR_BASE + (c)) -#define NS9750_SYS_TIMER_CTRL(c) (NS9750_SYS_TIMER_CTRL_BASE + (c)) -/* CS_DYN start with 4 */ -#define NS9750_SYS_CS_DYN_BASE(c) (NS9750_SYS_CS_DYN_BASE_BASE + ((c)-4)*2) -#define NS9750_SYS_CS_DYN_MASK(c) (NS9750_SYS_CS_DYN_MASK_BASE + ((c)-4)*2) -/* CS_STATIC start with 0 */ -#define NS9750_SYS_CS_STATIC_BASE(c) (NS9750_SYS_CS_STATIC_BASE_BASE + (c)*2) -#define NS9750_SYS_CS_STATIC_MASK(c) (NS9750_SYS_CS_STATIC_MASK_BASE + (c)*2) -#define NS9750_SYS_EXT_INT_CTRL(c) (NS9750_SYS_EXT_INT_CTRL + (c)) - -/* register bit fields */ - -#define NS9750_SYS_AHB_GEN_EXMAM (0x00000001) - -/* need to be n*8bit to BRC channel */ -#define NS9750_SYS_BRC_CEB (0x00000080) -#define NS9750_SYS_BRC_BRF_MA (0x00000030) -#define NS9750_SYS_BRC_BRF_100 (0x00000000) -#define NS9750_SYS_BRC_BRF_75 (0x00000010) -#define NS9750_SYS_BRC_BRF_50 (0x00000020) -#define NS9750_SYS_BRC_BRF_25 (0x00000030) - -#define NS9750_SYS_AHB_TIMEOUT_BAT_MA (0xFFFF0000) -#define NS9750_SYS_AHB_TIMEOUT_BMT_MA (0x0000FFFF) - -#define NS9750_SYS_AHB_ERROR2_ABL (0x00040000) -#define NS9750_SYS_AHB_ERROR2_AER (0x00020000) -#define NS9750_SYS_AHB_ERROR2_ABM (0x00010000) -#define NS9750_SYS_AHB_ERROR2_ABA (0x00008000) -#define NS9750_SYS_AHB_ERROR2_HWRT (0x00004000) -#define NS9750_SYS_AHB_ERROR2_HMID_MA (0x00003C00) -#define NS9750_SYS_AHB_ERROR2_HTPC_MA (0x000003C0) -#define NS9750_SYS_AHB_ERROR2_HSZ_MA (0x00000038) -#define NS9750_SYS_AHB_ERROR2_RR_MA (0x00000007) - -#define NS9750_SYS_AHB_MON_EIC (0x00800000) -#define NS9750_SYS_AHB_MON_MBII (0x00400000) -#define NS9750_SYS_AHB_MON_MBL_MA (0x003FFFC0) -#define NS9750_SYS_AHB_MON_MBLDC (0x00000020) -#define NS9750_SYS_AHB_MON_SERDC (0x00000010) -#define NS9750_SYS_AHB_MON_BMTC_MA (0x0000000C) -#define NS9750_SYS_AHB_MON_BMTC_RECORD (0x00000000) -#define NS9750_SYS_AHB_MON_BMTC_GEN_IRQ (0x00000004) -#define NS9750_SYS_AHB_MON_BMTC_GEN_RES (0x00000008) -#define NS9750_SYS_AHB_MON_BATC_MA (0x00000003) -#define NS9750_SYS_AHB_MON_BATC_RECORD (0x00000000) -#define NS9750_SYS_AHB_MON_BATC_GEN_IRQ (0x00000001) -#define NS9750_SYS_AHB_MON_BATC_GEN_RES (0x00000002) - -/* need to be n*8bit to Int Level */ - -#define NS9750_SYS_INT_CFG_IE (0x00000080) -#define NS9750_SYS_INT_CFG_IT (0x00000020) -#define NS9750_SYS_INT_CFG_IAD_MA (0x0000001F) - -#define NS9750_SYS_TIMER_INT_STAT_MA (0x0000FFFF) - -#define NS9750_SYS_SW_WDOG_CFG_SWWE (0x00000080) -#define NS9750_SYS_SW_WDOG_CFG_SWWI (0x00000020) -#define NS9750_SYS_SW_WDOG_CFG_SWWIC (0x00000010) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_MA (0x00000007) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_2 (0x00000000) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_4 (0x00000001) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_8 (0x00000002) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_16 (0x00000003) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_32 (0x00000004) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_64 (0x00000005) - -#define NS9750_SYS_CLOCK_LPCS_MA (0x00000380) -#define NS9750_SYS_CLOCK_LPCS_1 (0x00000000) -#define NS9750_SYS_CLOCK_LPCS_2 (0x00000080) -#define NS9750_SYS_CLOCK_LPCS_4 (0x00000100) -#define NS9750_SYS_CLOCK_LPCS_8 (0x00000180) -#define NS9750_SYS_CLOCK_LPCS_EXT (0x00000200) -#define NS9750_SYS_CLOCK_BBC (0x00000040) -#define NS9750_SYS_CLOCK_LCC (0x00000020) -#define NS9750_SYS_CLOCK_MCC (0x00000010) -#define NS9750_SYS_CLOCK_PARBC (0x00000008) -#define NS9750_SYS_CLOCK_PC (0x00000004) -#define NS9750_SYS_CLOCK_MACC (0x00000001) - -#define NS9750_SYS_RESET_SR (0x80000000) -#define NS9750_SYS_RESET_I2CW (0x00100000) -#define NS9750_SYS_RESET_CSE (0x00080000) -#define NS9750_SYS_RESET_SMWE (0x00040000) -#define NS9750_SYS_RESET_EWE (0x00020000) -#define NS9750_SYS_RESET_PI3WE (0x00010000) -#define NS9750_SYS_RESET_BBT (0x00000040) -#define NS9750_SYS_RESET_LCDC (0x00000020) -#define NS9750_SYS_RESET_MEMC (0x00000010) -#define NS9750_SYS_RESET_PCIAR (0x00000008) -#define NS9750_SYS_RESET_PCIM (0x00000004) -#define NS9750_SYS_RESET_MACM (0x00000001) - -#define NS9750_SYS_MISC_REV_MA (0xFF000000) -#define NS9750_SYS_MISC_PCIA (0x00002000) -#define NS9750_SYS_MISC_VDIS (0x00001000) -#define NS9750_SYS_MISC_BMM (0x00000800) -#define NS9750_SYS_MISC_CS1DB (0x00000400) -#define NS9750_SYS_MISC_CS1DW_MA (0x00000300) -#define NS9750_SYS_MISC_MCCM (0x00000080) -#define NS9750_SYS_MISC_PMSS (0x00000040) -#define NS9750_SYS_MISC_CS1P (0x00000020) -#define NS9750_SYS_MISC_ENDM (0x00000008) -#define NS9750_SYS_MISC_MBAR (0x00000004) -#define NS9750_SYS_MISC_IRAM0 (0x00000001) - -#define NS9750_SYS_PLL_PLLBS (0x02000000) -#define NS9750_SYS_PLL_PLLFS_MA (0x01800000) -#define NS9750_SYS_PLL_PLLIS_MA (0x00600000) -#define NS9750_SYS_PLL_PLLND_MA (0x001F0000) -#define NS9750_SYS_PLL_PLLSW (0x00008000) -#define NS9750_SYS_PLL_PLLBSSW (0x00000200) -#define NS9750_SYS_PLL_FSEL_MA (0x00000180) -#define NS9750_SYS_PLL_CPCC_MA (0x00000060) -#define NS9750_SYS_PLL_NDSW_MA (0x0000001F) - -#define NS9750_SYS_ACT_INT_STAT_MA (0x0000FFFF) - -#define NS9750_SYS_TIMER_CTRL_TEN (0x00008000) -#define NS9750_SYS_TIMER_CTRL_INTC (0x00000200) -#define NS9750_SYS_TIMER_CTRL_TLCS_MA (0x000001C0) -#define NS9750_SYS_TIMER_CTRL_TLCS_1 (0x00000000) -#define NS9750_SYS_TIMER_CTRL_TLCS_2 (0x00000040) -#define NS9750_SYS_TIMER_CTRL_TLCS_4 (0x00000080) -#define NS9750_SYS_TIMER_CTRL_TLCS_8 (0x000000C0) -#define NS9750_SYS_TIMER_CTRL_TLCS_16 (0x00000100) -#define NS9750_SYS_TIMER_CTRL_TLCS_32 (0x00000140) -#define NS9750_SYS_TIMER_CTRL_TLCS_64 (0x00000180) -#define NS9750_SYS_TIMER_CTRL_TLCS_EXT (0x000001C0) -#define NS9750_SYS_TIMER_CTRL_TM_MA (0x00000030) -#define NS9750_SYS_TIMER_CTRL_TM_INT (0x00000000) -#define NS9750_SYS_TIMER_CTRL_TM_LOW (0x00000010) -#define NS9750_SYS_TIMER_CTRL_TM_HIGH (0x00000020) -#define NS9750_SYS_TIMER_CTRL_INTS (0x00000008) -#define NS9750_SYS_TIMER_CTRL_UDS (0x00000004) -#define NS9750_SYS_TIMER_CTRL_TSZ (0x00000002) -#define NS9750_SYS_TIMER_CTRL_REN (0x00000001) - -#define NS9750_SYS_EXT_INT_CTRL_STS (0x00000008) -#define NS9750_SYS_EXT_INT_CTRL_CLR (0x00000004) -#define NS9750_SYS_EXT_INT_CTRL_PLTY (0x00000002) -#define NS9750_SYS_EXT_INT_CTRL_LVEDG (0x00000001) - -#endif /* FS_NS9750_SYS_H */ diff --git a/include/spl.h b/include/spl.h index b02f36f..b40be80 100644 --- a/include/spl.h +++ b/include/spl.h @@ -59,6 +59,9 @@ void spl_display_print(void); /* NAND SPL functions */ void spl_nand_load_image(void); +/* OneNAND SPL functions */ +void spl_onenand_load_image(void); + /* NOR SPL functions */ void spl_nor_load_image(void); diff --git a/spl/Makefile b/spl/Makefile index 101d478..aac6146 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -81,6 +81,8 @@ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o +LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o +LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o |