diff options
1597 files changed, 24677 insertions, 10836 deletions
diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml index 8801ff7..670bbc0 100644 --- a/.azure-pipelines.yml +++ b/.azure-pipelines.yml @@ -49,6 +49,33 @@ jobs: -j$(sysctl -n hw.logicalcpu) displayName: 'Perform tools-only build' + - job: check_for_migrated_symbols_in_board_header + displayName: 'Check for migrated symbols in board header' + pool: + vmImage: $(ubuntu_vm) + container: + image: $(ci_runner_image) + options: $(container_option) + steps: + - script: | + KSYMLST=`mktemp` + KUSEDLST=`mktemp` + cat `find . -name "Kconfig*"` | \ + sed -n -e 's/^\s*config *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p' \ + -e 's/^\s*menuconfig *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p' \ + | sort -u > $KSYMLST + for CFG in `find include/configs -name "*.h"`; do + grep '#define[[:blank:]]CONFIG_' $CFG | \ + sed -n 's/#define.\(CONFIG_[A-Za-z0-9_]*\).*/\1/p' | \ + sort -u > ${KUSEDLST} || true + NUM=`comm -12 --total --output-delimiter=, ${KSYMLST} ${KUSEDLST} | \ + cut -d , -f 3` + if [[ $NUM -ne 0 ]]; then + echo "Unmigrated symbols found in $CFG" + exit 1 + fi + done + - job: cppcheck displayName: 'Static code analysis with cppcheck' pool: diff --git a/.gitattributes b/.gitattributes index 899473a..1879a2d 100644 --- a/.gitattributes +++ b/.gitattributes @@ -3,3 +3,4 @@ # Denote all files that are truly binary and should not be modified *.bmp binary *.ttf binary +*.gz binary diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 4c89dae..d06cca4 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -105,6 +105,27 @@ build all other platforms: exit $ret; fi; +check for migrated symbols in board header: + stage: testsuites + script: + - KSYMLST=`mktemp`; + KUSEDLST=`mktemp`; + cat `find . -name "Kconfig*"` | + sed -n -e 's/^\s*config *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p' + -e 's/^\s*menuconfig *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p' + | sort -u > $KSYMLST; + for CFG in `find include/configs -name "*.h"`; do + grep '#define[[:blank:]]CONFIG_' $CFG | + sed -n 's/#define.\(CONFIG_[A-Za-z0-9_]*\).*/\1/p' | + sort -u > ${KUSEDLST} || true; + NUM=`comm -12 --total --output-delimiter=, ${KSYMLST} ${KUSEDLST} | + cut -d , -f 3`; + if [[ $NUM -ne 0 ]]; then + echo "Unmigrated symbols found in $CFG"; + exit 1; + fi; + done + # QA jobs for code analytics # static code analysis with cppcheck (we can add --enable=all later) cppcheck: diff --git a/MAINTAINERS b/MAINTAINERS index 90666ce..f4bd3d7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -115,6 +115,7 @@ F: arch/arm/include/asm/arch-m1/ F: arch/arm/mach-apple/ F: configs/apple_m1_defconfig F: drivers/iommu/apple_dart.c +F: drivers/pinctrl/pinctrl-apple.c F: include/configs/apple.h ARM @@ -273,10 +274,24 @@ F: drivers/ata/ahci_mvebu.c F: drivers/ddr/marvell/ F: drivers/gpio/mvebu_gpio.c F: drivers/spi/kirkwood_spi.c -F: drivers/pci/pci_mvebu.c F: drivers/pci/pcie_dw_mvebu.c F: drivers/watchdog/orion_wdt.c +ARM MARVELL PCIE CONTROLLER DRIVERS +M: Pali Rohár <pali@kernel.org> +M: Stefan Roese <sr@denx.de> +S: Maintained +T: git https://source.denx.de/u-boot/custodians/u-boot-marvell.git +F: drivers/pci/pci-aardvark.c +F: drivers/pci/pci_mvebu.c + +ARM MARVELL SERIAL DRIVERS +M: Pali Rohár <pali@kernel.org> +M: Stefan Roese <sr@denx.de> +S: Maintained +T: git https://source.denx.de/u-boot/custodians/u-boot-marvell.git +F: drivers/serial/serial_mvebu_a3700.c + ARM MARVELL PXA M: Marek Vasut <marex@denx.de> S: Maintained @@ -764,6 +779,13 @@ F: test/env/ F: tools/env* F: tools/mkenvimage.c +ENVIRONMENT AS TEXT +M: Simon Glass <sjg@chromium.org> +R: Wolfgang Denk <wd@denx.de> +S: Maintained +F: doc/usage/environment.rst +F: scripts/env2string.awk + FASTBOOT S: Orphaned F: cmd/fastboot.c @@ -517,6 +517,7 @@ version_h := include/generated/version_autogenerated.h timestamp_h := include/generated/timestamp_autogenerated.h defaultenv_h := include/generated/defaultenv_autogenerated.h dt_h := include/generated/dt.h +env_h := include/generated/environment.h no-dot-config-targets := clean clobber mrproper distclean \ help %docs check% coccicheck \ @@ -943,8 +944,9 @@ INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img endif endif INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin -INPUTS-$(CONFIG_OF_SEPARATE) += u-boot.dtb -INPUTS-$(CONFIG_BINMAN_STANDALONE_FDT) += u-boot.dtb + +# Allow omitting the .dtb output if it is not normally used +INPUTS-$(CONFIG_OF_SEPARATE) += $(if $(CONFIG_OF_OMIT_DTB),dts/dt.dtb,u-boot.dtb) ifeq ($(CONFIG_SPL_FRAMEWORK),y) INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img endif @@ -1053,6 +1055,10 @@ quiet_cmd_cfgcheck = CFGCHK $2 cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \ $(srctree)/scripts/config_whitelist.txt $(srctree) +quiet_cmd_ofcheck = OFCHK $2 +cmd_ofcheck = $(srctree)/scripts/check-of.sh $2 \ + $(srctree)/scripts/of_allowlist.txt + # Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. ) got = $(foreach cfg,$(1),$($(cfg))) @@ -1122,10 +1128,14 @@ endif $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG)) $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET)) $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY)) + $(call deprecated,CONFIG_DM_KEYBOARD,Keyboard drivers,v2022.10,$(CONFIG_KEYBOARD)) @# Check that this build does not use CONFIG options that we do not @# know about unless they are in Kconfig. All the existing CONFIG @# options are whitelisted, so new ones should not be added. $(call cmd,cfgcheck,u-boot.cfg) + @# Check that this build does not override OF_HAS_PRIOR_STAGE by + @# disabling OF_BOARD. + $(call cmd,ofcheck,$(KCONFIG_CONFIG)) PHONY += dtbs dtbs: dts/dt.dtb @@ -1179,7 +1189,7 @@ u-boot.bin: u-boot-fit-dtb.bin FORCE u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE $(call if_changed,cat) -else ifeq ($(CONFIG_OF_SEPARATE),y) +else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.) u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE $(call if_changed,cat) @@ -1302,11 +1312,13 @@ default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE)) quiet_cmd_binman = BINMAN $@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ + $(foreach f,$(BINMAN_TOOLPATHS),--toolpath $(f)) \ --toolpath $(objtree)/tools \ $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \ build -u -d u-boot.dtb -O . -m --allow-missing \ -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \ -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \ + $(foreach f,$(BINMAN_INDIRS),-I $(f)) \ -a atf-bl31-path=${BL31} \ -a opensbi-path=${OPENSBI} \ -a default-dt=$(default_dt) \ @@ -1411,7 +1423,7 @@ u-boot-lzma.img: u-boot.bin.lzma FORCE u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \ $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \ - $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX)$(CONFIG_BINMAN_STANDALONE_FDT),dts/dt.dtb) \ + $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \ ,$(UBOOT_BIN)) FORCE $(call if_changed,mkimage) $(BOARD_SIZE_CHECK) @@ -1794,6 +1806,69 @@ quiet_cmd_sym ?= SYM $@ u-boot.sym: u-boot FORCE $(call if_changed,sym) +# Environment processing +# --------------------------------------------------------------------------- + +# Directory where we expect the .env file, if it exists +ENV_DIR := $(srctree)/board/$(BOARDDIR) + +# Basename of .env file, stripping quotes +ENV_SOURCE_FILE := $(CONFIG_ENV_SOURCE_FILE:"%"=%) + +# Filename of .env file +ENV_FILE_CFG := $(ENV_DIR)/$(ENV_SOURCE_FILE).env + +# Default filename, if CONFIG_ENV_SOURCE_FILE is empty +ENV_FILE_BOARD := $(ENV_DIR)/$(CONFIG_SYS_BOARD:"%"=%).env + +# Select between the CONFIG_ENV_SOURCE_FILE and the default one +ENV_FILE := $(if $(ENV_SOURCE_FILE),$(ENV_FILE_CFG),$(wildcard $(ENV_FILE_BOARD))) + +# Run the environment text file through the preprocessor, but only if it is +# non-empty, to save time and possible build errors if something is wonky with +# the board +quiet_cmd_gen_envp = ENVP $@ + cmd_gen_envp = \ + if [ -s "$(ENV_FILE)" ]; then \ + $(CPP) -P $(CFLAGS) -x assembler-with-cpp -D__ASSEMBLY__ \ + -D__UBOOT_CONFIG__ \ + -I . -I include -I $(srctree)/include \ + -include linux/kconfig.h -include include/config.h \ + -I$(srctree)/arch/$(ARCH)/include \ + $< -o $@; \ + else \ + echo -n >$@ ; \ + fi +include/generated/env.in: include/generated/env.txt FORCE + $(call cmd,gen_envp) + +# Regenerate the environment if it changes +# We use 'wildcard' since the file is not required to exist (at present), in +# which case we don't want this dependency, but instead should create an empty +# file +# This rule is useful since it shows the source file for the environment +quiet_cmd_envc = ENVC $@ + cmd_envc = \ + if [ -f "$<" ]; then \ + cat $< > $@; \ + elif [ -n "$(ENV_SOURCE_FILE)" ]; then \ + echo "Missing file $(ENV_FILE_CFG)"; \ + else \ + echo -n >$@ ; \ + fi + +include/generated/env.txt: $(wildcard $(ENV_FILE)) FORCE + $(call cmd,envc) + +# Write out the resulting environment, converted to a C string +quiet_cmd_gen_envt = ENVT $@ + cmd_gen_envt = \ + awk -f $(srctree)/scripts/env2string.awk $< >$@ +$(env_h): include/generated/env.in + $(call cmd,gen_envt) + +# --------------------------------------------------------------------------- + # The actual objects are generated when descending, # make sure no implicit rule kicks in $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; @@ -1849,7 +1924,7 @@ endif # prepare2 creates a makefile if using a separate output directory prepare2: prepare3 outputmakefile cfg -prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \ +prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) $(env_h) \ include/config/auto.conf ifeq ($(wildcard $(LDSCRIPT)),) @echo >&2 " Could not find linker script." @@ -565,11 +565,6 @@ The following options need to be configured: boards with QUICC Engines require OF_QE to set UCC MAC addresses - CONFIG_OF_BOARD_SETUP - - Board code has addition modification that it wants to make - to the flat device tree before handing it off to the kernel - CONFIG_OF_SYSTEM_SETUP Other code has addition modification that it wants to make @@ -596,9 +591,6 @@ The following options need to be configured: Note: If a "bootargs" environment is defined, it will override the defaults discussed just above. -- Cache Configuration: - CONFIG_SYS_L2CACHE_OFF- Do not enable L2 cache in U-Boot - - Cache Configuration for ARM: CONFIG_SYS_L2_PL310 - Enable support for ARM PL310 L2 cache controller @@ -622,19 +614,6 @@ The following options need to be configured: Define this variable to enable hw flow control in serial driver. Current user of this option is drivers/serial/nsl16550.c driver -- Autoboot Command: - CONFIG_BOOTCOMMAND - Only needed when CONFIG_BOOTDELAY is enabled; - define a command string that is automatically executed - when no character is read on the console interface - within "Boot Delay" after reset. - - CONFIG_RAMBOOT and CONFIG_NFSBOOT - The value of these goes into the environment as - "ramboot" and "nfsboot" respectively, and can be used - as a convenience, when switching between booting from - RAM and NFS. - - Serial Download Echo Mode: CONFIG_LOADS_ECHO If defined to 1, all characters received during a @@ -659,50 +638,7 @@ The following options need to be configured: which adds regex support to some commands, as for example "env grep" and "setexpr". -- Device tree: - CONFIG_OF_CONTROL - If this variable is defined, U-Boot will use a device tree - to configure its devices, instead of relying on statically - compiled #defines in the board file. This option is - experimental and only available on a few boards. The device - tree is available in the global data as gd->fdt_blob. - - U-Boot needs to get its device tree from somewhere. This can - be done using one of the three options below: - - CONFIG_OF_SEPARATE - If this variable is defined, U-Boot will build a device tree - binary. It will be called u-boot.dtb. Architecture-specific - code will locate it at run-time. Generally this works by: - - cat u-boot.bin u-boot.dtb >image.bin - - and in fact, U-Boot does this for you, creating a file called - u-boot-dtb.bin which is useful in the common case. You can - still use the individual files if you need something more - exotic. - - CONFIG_OF_BOARD - If this variable is defined, U-Boot will use the device tree - provided by the board at runtime instead of embedding one with - the image. Only boards defining board_fdt_blob_setup() support - this option (see include/fdtdec.h file). - - Watchdog: - CONFIG_WATCHDOG - If this variable is defined, it enables watchdog - support for the SoC. There must be support in the SoC - specific code for a watchdog. For the 8xx - CPUs, the SIU Watchdog feature is enabled in the SYPCR - register. When supported for a specific SoC is - available, then no further board specific code should - be needed to use it. - - CONFIG_HW_WATCHDOG - When using a watchdog circuitry external to the used - SoC, then define this variable and provide board - specific code for the "hw_watchdog_reset" function. - CONFIG_SYS_WATCHDOG_FREQ Some platforms automatically call WATCHDOG_RESET() from the timer interrupt handler every @@ -785,9 +721,6 @@ The following options need to be configured: least one non-MTD partition type as well. - IDE Reset method: - CONFIG_IDE_RESET_ROUTINE - this is defined in several - board configurations files but used nowhere! - CONFIG_IDE_RESET - is this is defined, IDE Reset will be performed by calling the function ide_set_reset(int reset) @@ -1066,9 +999,6 @@ The following options need to be configured: sending again an USB request to the device. - Journaling Flash filesystem support: - CONFIG_JFFS2_NAND - Define these for a default partition on a NAND device - CONFIG_SYS_JFFS2_FIRST_SECTOR, CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS Define these for a default partition on a NOR device @@ -1076,14 +1006,6 @@ The following options need to be configured: - Keyboard Support: See Kconfig help for available keyboard drivers. - CONFIG_KEYBOARD - - Define this to enable a custom keyboard support. - This simply calls drv_keyboard_init() which must be - defined in your board-specific files. This option is deprecated - and is only used by novena. For new boards, use driver model - instead. - - Video support: CONFIG_FSL_DIU_FB Enable the Freescale DIU video driver. Reference boards for @@ -1095,7 +1017,6 @@ The following options need to be configured: CONFIG_CFB_CONSOLE CONFIG_VIDEO_SW_CURSOR CONFIG_VGA_AS_SINGLE_DEVICE - CONFIG_VIDEO_LOGO CONFIG_VIDEO_BMP_LOGO The DIU driver will look for the 'video-mode' environment @@ -1573,16 +1494,6 @@ The following options need to be configured: SPI EEPROM, also an instance works with Crystal A/D and D/As on the SACSng board) - CONFIG_SOFT_SPI - - Enables a software (bit-bang) SPI driver rather than - using hardware support. This is a general purpose - driver that only requires three general I/O port pins - (two outputs, one input) to function. If this is - defined, the board configuration must define several - SPI configuration items (port pins to use, etc). For - an example, see include/configs/sacsng.h. - CONFIG_SYS_SPI_MXC_WAIT Timeout for waiting until spi transfer completed. default: (CONFIG_SYS_HZ/100) /* 10 ms */ @@ -1648,13 +1559,6 @@ The following options need to be configured: Time to wait after FPGA configuration. The default is 200 ms. -- Configuration Management: - - CONFIG_IDENT_STRING - - If defined, this string will be added to the U-Boot - version information (U_BOOT_VERSION) - - Vendor Parameter Protection: U-Boot considers the values of the environment @@ -1716,14 +1620,6 @@ The following options need to be configured: HERMES, IP860, RPXlite, LWMON, FLAGADM -- Access to physical memory region (> 4GB) - Some basic support is provided for operations on memory not - normally accessible to U-Boot - e.g. some architectures - support access to more than 4GB of memory on 32-bit - machines using physical address extension or similar. - Define CONFIG_PHYSMEM to access this basic support, which - currently only supports clearing the memory. - - Error Recovery: CONFIG_NET_RETRY_COUNT @@ -1983,10 +1879,6 @@ The following options need to be configured: CONFIG_SPL_INIT_MINIMAL Arch init code should be built for a very small image - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION - Partition on the MMC to load U-Boot from when the MMC is being - used in raw mode - CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR Sector to load kernel uImage from when MMC is being used in raw mode (for Falcon mode) @@ -2567,17 +2459,6 @@ Low Level (hardware related) configuration options: - CONFIG_SYS_MAMR_PTA: periodic timer for refresh -- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, - CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, - CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, - CONFIG_SYS_BR1_PRELIM: - Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) - -- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, - CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM, - CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: - Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) - - CONFIG_SYS_SRIO: Chip has SRIO or not @@ -2966,334 +2847,6 @@ TODO. For now: just type "help <command>". -Environment Variables: -====================== - -U-Boot supports user configuration using Environment Variables which -can be made persistent by saving to Flash memory. - -Environment Variables are set using "setenv", printed using -"printenv", and saved to Flash using "saveenv". Using "setenv" -without a value can be used to delete a variable from the -environment. As long as you don't save the environment you are -working with an in-memory copy. In case the Flash area containing the -environment is erased by accident, a default environment is provided. - -Some configuration options can be set using Environment Variables. - -List of environment variables (most likely not complete): - - baudrate - see CONFIG_BAUDRATE - - bootdelay - see CONFIG_BOOTDELAY - - bootcmd - see CONFIG_BOOTCOMMAND - - bootargs - Boot arguments when booting an RTOS image - - bootfile - Name of the image to load with TFTP - - bootm_low - Memory range available for image processing in the bootm - command can be restricted. This variable is given as - a hexadecimal number and defines lowest address allowed - for use by the bootm command. See also "bootm_size" - environment variable. Address defined by "bootm_low" is - also the base of the initial memory mapping for the Linux - kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and - bootm_mapsize. - - bootm_mapsize - Size of the initial memory mapping for the Linux kernel. - This variable is given as a hexadecimal number and it - defines the size of the memory region starting at base - address bootm_low that is accessible by the Linux kernel - during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used - as the default value if it is defined, and bootm_size is - used otherwise. - - bootm_size - Memory range available for image processing in the bootm - command can be restricted. This variable is given as - a hexadecimal number and defines the size of the region - allowed for use by the bootm command. See also "bootm_low" - environment variable. - - bootstopkeysha256, bootdelaykey, bootstopkey - See README.autoboot - - updatefile - Location of the software update file on a TFTP server, used - by the automatic software update feature. Please refer to - documentation in doc/README.update for more details. - - autoload - if set to "no" (any string beginning with 'n'), - "bootp" will just load perform a lookup of the - configuration from the BOOTP server, but not try to - load any image using TFTP - - autostart - if set to "yes", an image loaded using the "bootp", - "rarpboot", "tftpboot" or "diskboot" commands will - be automatically started (by internally calling - "bootm") - - If set to "no", a standalone image passed to the - "bootm" command will be copied to the load address - (and eventually uncompressed), but NOT be started. - This can be used to load and uncompress arbitrary - data. - - fdt_high - if set this restricts the maximum address that the - flattened device tree will be copied into upon boot. - For example, if you have a system with 1 GB memory - at physical address 0x10000000, while Linux kernel - only recognizes the first 704 MB as low memory, you - may need to set fdt_high as 0x3C000000 to have the - device tree blob be copied to the maximum address - of the 704 MB low memory, so that Linux kernel can - access it during the boot procedure. - - If this is set to the special value 0xFFFFFFFF then - the fdt will not be copied at all on boot. For this - to work it must reside in writable memory, have - sufficient padding on the end of it for u-boot to - add the information it needs into it, and the memory - must be accessible by the kernel. - - fdtcontroladdr- if set this is the address of the control flattened - device tree used by U-Boot when CONFIG_OF_CONTROL is - defined. - - i2cfast - (PPC405GP|PPC405EP only) - if set to 'y' configures Linux I2C driver for fast - mode (400kHZ). This environment variable is used in - initialization code. So, for changes to be effective - it must be saved and board must be reset. - - initrd_high - restrict positioning of initrd images: - If this variable is not set, initrd images will be - copied to the highest possible address in RAM; this - is usually what you want since it allows for - maximum initrd size. If for some reason you want to - make sure that the initrd image is loaded below the - CONFIG_SYS_BOOTMAPSZ limit, you can set this environment - variable to a value of "no" or "off" or "0". - Alternatively, you can set it to a maximum upper - address to use (U-Boot will still check that it - does not overwrite the U-Boot stack and data). - - For instance, when you have a system with 16 MB - RAM, and want to reserve 4 MB from use by Linux, - you can do this by adding "mem=12M" to the value of - the "bootargs" variable. However, now you must make - sure that the initrd image is placed in the first - 12 MB as well - this can be done with - - setenv initrd_high 00c00000 - - If you set initrd_high to 0xFFFFFFFF, this is an - indication to U-Boot that all addresses are legal - for the Linux kernel, including addresses in flash - memory. In this case U-Boot will NOT COPY the - ramdisk at all. This may be useful to reduce the - boot time on your system, but requires that this - feature is supported by your Linux kernel. - - ipaddr - IP address; needed for tftpboot command - - loadaddr - Default load address for commands like "bootp", - "rarpboot", "tftpboot", "loadb" or "diskboot" - - loads_echo - see CONFIG_LOADS_ECHO - - serverip - TFTP server IP address; needed for tftpboot command - - bootretry - see CONFIG_BOOT_RETRY_TIME - - bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR - - bootstopkey - see CONFIG_AUTOBOOT_STOP_STR - - ethprime - controls which interface is used first. - - ethact - controls which interface is currently active. - For example you can do the following - - => setenv ethact FEC - => ping 192.168.0.1 # traffic sent on FEC - => setenv ethact SCC - => ping 10.0.0.1 # traffic sent on SCC - - ethrotate - When set to "no" U-Boot does not go through all - available network interfaces. - It just stays at the currently selected interface. - - netretry - When set to "no" each network operation will - either succeed or fail without retrying. - When set to "once" the network operation will - fail when all the available network interfaces - are tried once without success. - Useful on scripts which control the retry operation - themselves. - - npe_ucode - set load address for the NPE microcode - - silent_linux - If set then Linux will be told to boot silently, by - changing the console to be empty. If "yes" it will be - made silent. If "no" it will not be made silent. If - unset, then it will be made silent if the U-Boot console - is silent. - - tftpsrcp - If this is set, the value is used for TFTP's - UDP source port. - - tftpdstp - If this is set, the value is used for TFTP's UDP - destination port instead of the Well Know Port 69. - - tftpblocksize - Block size to use for TFTP transfers; if not set, - we use the TFTP server's default block size - - tftptimeout - Retransmission timeout for TFTP packets (in milli- - seconds, minimum value is 1000 = 1 second). Defines - when a packet is considered to be lost so it has to - be retransmitted. The default is 5000 = 5 seconds. - Lowering this value may make downloads succeed - faster in networks with high packet loss rates or - with unreliable TFTP servers. - - tftptimeoutcountmax - maximum count of TFTP timeouts (no - unit, minimum value = 0). Defines how many timeouts - can happen during a single file transfer before that - transfer is aborted. The default is 10, and 0 means - 'no timeouts allowed'. Increasing this value may help - downloads succeed with high packet loss rates, or with - unreliable TFTP servers or client hardware. - - tftpwindowsize - if this is set, the value is used for TFTP's - window size as described by RFC 7440. - This means the count of blocks we can receive before - sending ack to server. - - vlan - When set to a value < 4095 the traffic over - Ethernet is encapsulated/received over 802.1q - VLAN tagged frames. - - bootpretryperiod - Period during which BOOTP/DHCP sends retries. - Unsigned value, in milliseconds. If not set, the period will - be either the default (28000), or a value based on - CONFIG_NET_RETRY_COUNT, if defined. This value has - precedence over the valu based on CONFIG_NET_RETRY_COUNT. - - memmatches - Number of matches found by the last 'ms' command, in hex - - memaddr - Address of the last match found by the 'ms' command, in hex, - or 0 if none - - mempos - Index position of the last match found by the 'ms' command, - in units of the size (.b, .w, .l) of the search - - zbootbase - (x86 only) Base address of the bzImage 'setup' block - - zbootaddr - (x86 only) Address of the loaded bzImage, typically - BZIMAGE_LOAD_ADDR which is 0x100000 - -The following image location variables contain the location of images -used in booting. The "Image" column gives the role of the image and is -not an environment variable name. The other columns are environment -variable names. "File Name" gives the name of the file on a TFTP -server, "RAM Address" gives the location in RAM the image will be -loaded to, and "Flash Location" gives the image's address in NOR -flash or offset in NAND flash. - -*Note* - these variables don't have to be defined for all boards, some -boards currently use other variables for these purposes, and some -boards use these variables for other purposes. - -Image File Name RAM Address Flash Location ------ --------- ----------- -------------- -u-boot u-boot u-boot_addr_r u-boot_addr -Linux kernel bootfile kernel_addr_r kernel_addr -device tree blob fdtfile fdt_addr_r fdt_addr -ramdisk ramdiskfile ramdisk_addr_r ramdisk_addr - -The following environment variables may be used and automatically -updated by the network boot commands ("bootp" and "rarpboot"), -depending the information provided by your boot server: - - bootfile - see above - dnsip - IP address of your Domain Name Server - dnsip2 - IP address of your secondary Domain Name Server - gatewayip - IP address of the Gateway (Router) to use - hostname - Target hostname - ipaddr - see above - netmask - Subnet Mask - rootpath - Pathname of the root filesystem on the NFS server - serverip - see above - - -There are two special Environment Variables: - - serial# - contains hardware identification information such - as type string and/or serial number - ethaddr - Ethernet address - -These variables can be set only once (usually during manufacturing of -the board). U-Boot refuses to delete or overwrite these variables -once they have been set once. - - -Further special Environment Variables: - - ver - Contains the U-Boot version string as printed - with the "version" command. This variable is - readonly (see CONFIG_VERSION_VARIABLE). - - -Please note that changes to some configuration parameters may take -only effect after the next boot (yes, that's just like Windoze :-). - - -Callback functions for environment variables: ---------------------------------------------- - -For some environment variables, the behavior of u-boot needs to change -when their values are changed. This functionality allows functions to -be associated with arbitrary variables. On creation, overwrite, or -deletion, the callback will provide the opportunity for some side -effect to happen or for the change to be rejected. - -The callbacks are named and associated with a function using the -U_BOOT_ENV_CALLBACK macro in your board or driver code. - -These callbacks are associated with variables in one of two ways. The -static list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC -in the board configuration to a string that defines a list of -associations. The list must be in the following format: - - entry = variable_name[:callback_name] - list = entry[,list] - -If the callback name is not specified, then the callback is deleted. -Spaces are also allowed anywhere in the list. - -Callbacks can also be associated by defining the ".callbacks" variable -with the same list format above. Any association in ".callbacks" will -override any association in the static list. You can define -CONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the -".callbacks" environment variable in the default or embedded environment. - -If CONFIG_REGEX is defined, the variable_name above is evaluated as a -regular expression. This allows multiple variables to be connected to -the same callback without explicitly listing them all out. - -The signature of the callback functions is: - - int callback(const char *name, const char *value, enum env_op op, int flags) - -* name - changed environment variable -* value - new value of the environment variable -* op - operation (create, overwrite, or delete) -* flags - attributes of the environment variable change, see flags H_* in - include/search.h - -The return value is 0 if the variable change is accepted and 1 otherwise. - - Note for Redundant Ethernet Interfaces: ======================================= diff --git a/arch/Kconfig b/arch/Kconfig index 3e2cc84..ee32e83 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -1,3 +1,7 @@ +config ARCH_MAP_SYSMEM + depends on SANDBOX || NDS32 + def_bool y + config CREATE_ARCH_SYMLINK bool @@ -194,6 +198,8 @@ config SANDBOX imply PHY_FIXED imply DM_DSA imply CMD_EXTENSION + imply KEYBOARD + imply PHYSMEM config SH bool "SuperH architecture" @@ -245,6 +251,7 @@ config X86 imply USB_ETHER_SMSC95XX imply USB_HOST_ETHER imply PCH + imply PHYSMEM imply RTC_MC146818 imply ACPIGEN if !QEMU imply SYSINFO if GENERATE_SMBIOS_TABLE @@ -350,6 +357,18 @@ config SYS_DISABLE_DCACHE_OPS Note that, its up to the individual architectures to implement this functionality. +config SYS_IMMR + hex + depends on PPC || FSL_LSCH2 || FSL_LSCH3 || ARCH_LS1021A + default 0xFF000000 if MPC8xx + default 0xF0000000 if ARCH_MPC8313 + default 0xE0000000 if MPC83xx && !ARCH_MPC8313 + default 0x01000000 if ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 + default SYS_CCSRBAR_DEFAULT + help + Address for the Internal Memory-Mapped Registers (IMMR) window used + to configure the features of many Freescale / NXP SoCs. + config SKIP_LOWLEVEL_INIT bool "Skip the calls to certain low level initialization functions" depends on ARM || NDS32 || MIPS || RISCV diff --git a/arch/arc/lib/cpu.c b/arch/arc/lib/cpu.c index 07f5787..6b21520 100644 --- a/arch/arc/lib/cpu.c +++ b/arch/arc/lib/cpu.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <init.h> #include <malloc.h> #include <vsprintf.h> @@ -18,7 +19,7 @@ int arch_cpu_init(void) { timer_init(); - gd->cpu_clk = CONFIG_SYS_CLK_FREQ; + gd->cpu_clk = get_board_sys_clk(); gd->ram_size = CONFIG_SYS_SDRAM_SIZE; cache_init(); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f7f0383..7264d72 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -311,6 +311,10 @@ config CPU_PXA select SYS_CACHE_SHIFT_5 imply SYS_ARM_MMU +config CPU_PXA27X + bool + select CPU_PXA + config CPU_SA1100 bool select SYS_CACHE_SHIFT_5 @@ -635,6 +639,7 @@ config ARCH_BCMSTB select GPIO_EXTRA_HEADER select OF_CONTROL imply CMD_DM + imply OF_HAS_PRIOR_STAGE help This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. @@ -707,12 +712,12 @@ config ARCH_HIGHBANK select DM select DM_SERIAL select OF_CONTROL - select OF_BOARD select CLK select CLK_CCF select AHCI select DM_ETH select PHYS_64BIT + imply OF_HAS_PRIOR_STAGE config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" @@ -927,6 +932,7 @@ config ARCH_APPLE select CLK select CMD_USB select DM + select DM_GPIO select DM_KEYBOARD select DM_SERIAL select DM_USB @@ -934,12 +940,13 @@ config ARCH_APPLE select IOMMU select LINUX_KERNEL_IMAGE_HEADER select OF_CONTROL - select OF_BOARD + select PINCTRL select POSITION_INDEPENDENT select USB imply CMD_DM imply CMD_GPT imply DISTRO_DEFAULTS + imply OF_HAS_PRIOR_STAGE config ARCH_OWL bool "Actions Semi OWL SoCs" @@ -964,6 +971,7 @@ config ARCH_QEMU imply DM_RNG imply DM_RTC imply RTC_PL031 + imply OF_HAS_PRIOR_STAGE config ARCH_RMOBILE bool "Renesas ARM SoCs" @@ -1241,7 +1249,6 @@ config TARGET_VEXPRESS64_JUNO select PL01X_SERIAL select DM select OF_CONTROL - select OF_BOARD select CLK select DM_SERIAL select ARM_PSCI_FW @@ -1249,6 +1256,7 @@ config TARGET_VEXPRESS64_JUNO select DM_ETH select BLK select USB + imply OF_HAS_PRIOR_STAGE config TARGET_TOTAL_COMPUTE bool "Support Total Compute Platform" @@ -1763,7 +1771,7 @@ config TARGET_SL28 config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" - select CPU_PXA + select CPU_PXA27X select GPIO_EXTRA_HEADER config ARCH_UNIPHIER @@ -1905,6 +1913,8 @@ config ARCH_OCTEONTX select OF_LIVE select BOARD_LATE_INIT select SYS_CACHE_SHIFT_7 + select SYS_PCI_64BIT if PCI + imply OF_HAS_PRIOR_STAGE config ARCH_OCTEONTX2 bool "Support OcteonTX2 SoCs" @@ -1916,6 +1926,8 @@ config ARCH_OCTEONTX2 select OF_LIVE select BOARD_LATE_INIT select SYS_CACHE_SHIFT_7 + select SYS_PCI_64BIT if PCI + imply OF_HAS_PRIOR_STAGE config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" @@ -1952,6 +1964,8 @@ config TARGET_XENGUEST_ARM64 select LINUX_KERNEL_IMAGE_HEADER select XEN_SERIAL select SSCANF + imply OF_HAS_PRIOR_STAGE + endchoice config SUPPORT_PASSING_ATAGS @@ -2038,6 +2052,14 @@ config ISW_ENTRY_ADDR image headers. endif +config SYS_KWD_CONFIG + string "kwbimage config file path" + depends on ARCH_KIRKWOOD || ARCH_MVEBU + default "arch/arm/mach-mvebu/kwbimage.cfg" + help + Path within the source directory to the kwbimage.cfg file to use + when packaging the U-Boot image for use. + source "arch/arm/mach-apple/Kconfig" source "arch/arm/mach-aspeed/Kconfig" diff --git a/arch/arm/cpu/arm920t/ep93xx/speed.c b/arch/arm/cpu/arm920t/ep93xx/speed.c index 51e9dda..8dd3904 100644 --- a/arch/arm/cpu/arm920t/ep93xx/speed.c +++ b/arch/arm/cpu/arm920t/ep93xx/speed.c @@ -6,12 +6,13 @@ */ #include <common.h> +#include <clock_legacy.h> #include <asm/arch/ep93xx.h> #include <asm/io.h> #include <div64.h> /* - * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL. + * get_board_sys_clk() should be defined as the input frequency of the PLL. * * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of * the specified bus in HZ. @@ -20,14 +21,14 @@ /* * return the PLL output frequency * - * PLL rate = CONFIG_SYS_CLK_FREQ * (X1FBD + 1) * (X2FBD + 1) + * PLL rate = get_board_sys_clk() * (X1FBD + 1) * (X2FBD + 1) * / (X2IPD + 1) / 2^PS */ static ulong get_PLLCLK(uint32_t *pllreg) { uint8_t i; const uint32_t clkset = readl(pllreg); - uint64_t rate = CONFIG_SYS_CLK_FREQ; + uint64_t rate = get_board_sys_clk(); rate *= ((clkset >> SYSCON_CLKSET_PLL_X1FBD1_SHIFT) & 0x1f) + 1; rate *= ((clkset >> SYSCON_CLKSET_PLL_X2FBD2_SHIFT) & 0x3f) + 1; do_div(rate, (clkset & 0x1f) + 1); /* X2IPD */ @@ -87,9 +88,9 @@ ulong get_UCLK(void) const uint32_t value = readl(&syscon->pwrcnt); if (value & SYSCON_PWRCNT_UART_BAUD) - uclk_rate = CONFIG_SYS_CLK_FREQ; + uclk_rate = get_board_sys_clk(); else - uclk_rate = CONFIG_SYS_CLK_FREQ / 2; + uclk_rate = get_board_sys_clk() / 2; return uclk_rate; } diff --git a/arch/arm/cpu/arm920t/imx/speed.c b/arch/arm/cpu/arm920t/imx/speed.c index eff6113..c19206a 100644 --- a/arch/arm/cpu/arm920t/imx/speed.c +++ b/arch/arm/cpu/arm920t/imx/speed.c @@ -7,13 +7,14 @@ #include <common.h> #if defined (CONFIG_IMX) +#include <clock_legacy.h> #include <asm/arch/imx-regs.h> /* ------------------------------------------------------------------------- */ /* NOTE: This describes the proper use of this file. * - * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL. + * get_board_sys_clk() should be defined as the input frequency of the PLL. * SH FIXME: 16780000 in our case * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of * the specified bus in HZ. @@ -45,7 +46,7 @@ ulong get_mcuPLLCLK(void) mfi = mfi<=5 ? 5 : mfi; - return (2*(CONFIG_SYS_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1); + return (2*(get_board_sys_clk()>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1); } ulong get_FCLK(void) diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index f919d02..6a948d7 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -1,5 +1,6 @@ config ARCH_LS1021A bool + select FSL_IFC if !QSPI_BOOT && !SD_BOOT_QSPI select SYS_FSL_DDR_BE if SYS_FSL_DDR select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR select SYS_FSL_ERRATUM_A008378 diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c index 984ae8b..c5e6118 100644 --- a/arch/arm/cpu/armv7/ls102xa/clock.c +++ b/arch/arm/cpu/armv7/ls102xa/clock.c @@ -39,7 +39,7 @@ void get_sys_info(struct sys_info *sys_info) uint i; uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS]; uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS]; - unsigned long sysclk = CONFIG_SYS_CLK_FREQ; + unsigned long sysclk = get_board_sys_clk(); sys_info->freq_systembus = sysclk; #if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ) diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index 0daf823..e63a905 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -131,9 +131,9 @@ void ft_cpu_setup(void *blob, struct bd_info *bd) sysclk_path = fdt_get_alias(blob, "sysclk"); if (sysclk_path) do_fixup_by_path_u32(blob, sysclk_path, "clock-frequency", - CONFIG_SYS_CLK_FREQ, 1); + get_board_sys_clk(), 1); do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0", - "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); + "clock-frequency", get_board_sys_clk(), 1); #if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT) #define UBOOT_HEAD_LEN 0x1000 @@ -184,13 +184,13 @@ void ft_cpu_setup(void *blob, struct bd_info *bd) #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT, CONFIG_SYS_IFC_ADDR); - fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED); #else off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT, QSPI0_BASE_ADDR); - fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED); off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT, DSPI1_BASE_ADDR); - fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED); #endif } diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 1a057f7..da53afc 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -41,6 +41,7 @@ config ARCH_LS1028A select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_LE select FSL_TZASC_1 + select FSL_TZPC_BP147 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F select SYS_I2C_MXC @@ -59,6 +60,7 @@ config ARCH_LS1043A bool select ARMV8_SET_SMPEN select ARM_ERRATA_855873 if !TFABOOT + select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI) select FSL_LAYERSCAPE select FSL_LSCH2 select GICV2 @@ -94,6 +96,7 @@ config ARCH_LS1043A config ARCH_LS1046A bool select ARMV8_SET_SMPEN + select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI) select FSL_LAYERSCAPE select FSL_LSCH2 select GICV2 @@ -134,6 +137,7 @@ config ARCH_LS1088A bool select ARMV8_SET_SMPEN select ARM_ERRATA_855873 if !TFABOOT + select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 select GICV3 @@ -182,6 +186,7 @@ config ARCH_LS2080A select ARM_ERRATA_828024 select ARM_ERRATA_829520 select ARM_ERRATA_833471 + select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 select GICV3 @@ -233,8 +238,11 @@ config ARCH_LS2080A config ARCH_LX2162A bool select ARMV8_SET_SMPEN + select FSL_DDR_BIST + select FSL_DDR_INTERACTIVE select FSL_LAYERSCAPE select FSL_LSCH3 + select FSL_TZPC_BP147 select GICV3 select NXP_LSCH3_2 select SYS_HAS_SERDES @@ -254,6 +262,7 @@ config ARCH_LX2162A select SYS_FSL_HAS_DDR4 select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_LE + select SYS_PCI_64BIT if PCI select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F select SYS_I2C_MXC @@ -267,8 +276,11 @@ config ARCH_LX2162A config ARCH_LX2160A bool select ARMV8_SET_SMPEN + select FSL_DDR_BIST + select FSL_DDR_INTERACTIVE select FSL_LAYERSCAPE select FSL_LSCH3 + select FSL_TZPC_BP147 select GICV3 select HAS_FSL_XHCI_USB if USB_HOST select NXP_LSCH3_2 @@ -290,6 +302,7 @@ config ARCH_LX2160A select SYS_FSL_HAS_DDR4 select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_LE + select SYS_PCI_64BIT if PCI select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F select SYS_I2C_MXC @@ -517,10 +530,6 @@ endmenu menu "Layerscape clock tree configuration" depends on FSL_LSCH2 || FSL_LSCH3 -config SYS_FSL_CLK - bool "Enable clock tree initialization" - default y - config CLUSTER_CLK_FREQ int "Reference clock of core cluster" depends on ARCH_LS1012A diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 1a359d0..2ded3e4 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <cpu_func.h> #include <env.h> #include <fsl_ddr_sdram.h> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 4ec0dbf..4354aa2 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -161,7 +161,7 @@ void fsl_fdt_disable_usb(void *blob) * controller is used, SYSCLK must meet the additional requirement * of 100 MHz. */ - if (CONFIG_SYS_CLK_FREQ != 100000000) { + if (get_board_sys_clk() != 100000000) { off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3"); while (off != -FDT_ERR_NOTFOUND) { fdt_status_disabled(blob, off); @@ -655,7 +655,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd) #endif do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency", - CONFIG_SYS_CLK_FREQ, 1); + get_board_sys_clk(), 1); #ifdef CONFIG_GIC_V3_ITS ls_gic_rd_tables_init(blob); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c index 3f97c8a..570105a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c @@ -52,12 +52,12 @@ void get_sys_info(struct sys_info *sys_info) uint i, cluster; uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS]; uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS]; - unsigned long sysclk = CONFIG_SYS_CLK_FREQ; + unsigned long sysclk = get_board_sys_clk(); unsigned long cluster_clk; sys_info->freq_systembus = sysclk; #ifndef CONFIG_CLUSTER_CLK_FREQ -#define CONFIG_CLUSTER_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_CLUSTER_CLK_FREQ get_board_sys_clk() #endif cluster_clk = CONFIG_CLUSTER_CLK_FREQ; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c index 6f50cba..1c04a5b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c @@ -72,7 +72,7 @@ void get_sys_info(struct sys_info *sys_info) #endif uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS]; uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS]; - unsigned long sysclk = CONFIG_SYS_CLK_FREQ; + unsigned long sysclk = get_board_sys_clk(); int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS; u32 c_pll_sel, cplx_pll; void *offset; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c index d28ab26..2e2688e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <cpu_func.h> #include <image.h> #include <log.h> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 68111b6..564cc27 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -93,7 +93,9 @@ void board_init_f(ulong dummy) i2c_init_all(); #endif #endif -#ifdef CONFIG_VID +#if defined(CONFIG_VID) && (defined(CONFIG_ARCH_LS1088A) || \ + defined(CONFIG_ARCH_LX2160A) || \ + defined(CONFIG_ARCH_LX2162A)) init_func_vid(); #endif dram_init(); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b3e2a9c..aeaec71 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -361,7 +361,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ dtb-$(CONFIG_ARCH_VERSAL) += \ versal-mini.dtb \ versal-mini-emmc0.dtb \ - versal-mini-emmc1.dtb + versal-mini-emmc1.dtb \ + xilinx-versal-virt.dtb dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \ zynqmp-r5.dtb dtb-$(CONFIG_AM33XX) += \ @@ -871,6 +872,8 @@ dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \ imx7ulp-evk.dtb +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb + dtb-$(CONFIG_ARCH_IMX8) += \ fsl-imx8qm-apalis.dtb \ fsl-imx8qm-mek.dtb \ @@ -1078,7 +1081,8 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ - bcm2837-rpi-cm3-io3.dtb + bcm2837-rpi-cm3-io3.dtb \ + bcm2711-rpi-4-b.dtb dtb-$(CONFIG_ARCH_BCM63158) += \ bcm963158.dtb @@ -1091,6 +1095,8 @@ dtb-$(CONFIG_ARCH_BCM6858) += \ dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb +dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb + dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb @@ -1140,6 +1146,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8516-pumpkin.dtb \ mt8518-ap1-emmc.dtb +dtb-$(CONFIG_XEN) += xenguest-arm64.dtb + +dtb-$(CONFIG_ARCH_OCTEONTX) += octeontx.dtb +dtb-$(CONFIG_ARCH_OCTEONTX2) += octeontx.dtb + dtb-$(CONFIG_TARGET_GE_BX50V3) += \ imx6q-bx50v3.dtb \ imx6q-b850v3.dtb \ @@ -1149,7 +1160,10 @@ dtb-$(CONFIG_TARGET_GE_BX50V3) += \ dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb +# TODO(Linus Walleij <linus.walleij@linaro.org>): Should us a single vexpress +# Kconfig option to build all of these. See examples above. dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb +dtb-$(CONFIG_TARGET_VEXPRESS64_JUNO) += juno-r2.dtb dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb @@ -1163,6 +1177,8 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb +dtb-$(CONFIG_ARCH_QEMU) += qemu-arm.dtb qemu-arm64.dtb + targets += $(dtb-y) # Add any required device tree compiler flags here diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts index cba6139..360d521 100644 --- a/arch/arm/dts/armada-3720-espressobin.dts +++ b/arch/arm/dts/armada-3720-espressobin.dts @@ -80,24 +80,6 @@ }; }; -&comphy { - max-lanes = <3>; - phy0 { - phy-type = <COMPHY_TYPE_USB3_HOST0>; - phy-speed = <COMPHY_SPEED_5G>; - }; - - phy1 { - phy-type = <COMPHY_TYPE_PEX0>; - phy-speed = <COMPHY_SPEED_2_5G>; - }; - - phy2 { - phy-type = <COMPHY_TYPE_SATA0>; - phy-speed = <COMPHY_SPEED_5G>; - }; -}; - ð0 { status = "okay"; pinctrl-names = "default"; @@ -119,6 +101,7 @@ /* CON3 */ &sata { status = "okay"; + phys = <&comphy2 0>; }; &sdhci0 { @@ -200,6 +183,7 @@ /* CON31 */ &usb3 { status = "okay"; + phys = <&comphy0 0>; }; &pcie0 { @@ -207,4 +191,5 @@ pinctrl-0 = <&pcie_pins>; reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; status = "okay"; + phys = <&comphy1 0>; }; diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts index f47ced0..d017570 100644 --- a/arch/arm/dts/armada-3720-turris-mox.dts +++ b/arch/arm/dts/armada-3720-turris-mox.dts @@ -94,24 +94,6 @@ }; }; -&comphy { - max-lanes = <3>; - phy0 { - phy-type = <COMPHY_TYPE_SGMII1>; - phy-speed = <COMPHY_SPEED_3_125G>; - }; - - phy1 { - phy-type = <COMPHY_TYPE_PEX0>; - phy-speed = <COMPHY_SPEED_5G>; - }; - - phy2 { - phy-type = <COMPHY_TYPE_USB3_HOST0>; - phy-speed = <COMPHY_SPEED_5G>; - }; -}; - ð0 { status = "okay"; pinctrl-names = "default"; @@ -120,6 +102,11 @@ phy = <ð_phy1>; }; +ð1 { + phy-mode = "2500base-x"; + phys = <&comphy0 1>; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -222,6 +209,7 @@ &usb3 { vbus-supply = <®_usb3_vbus>; status = "okay"; + phys = <&comphy2 0>; }; &pcie0 { @@ -229,4 +217,5 @@ pinctrl-0 = <&pcie_pins>; reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; status = "disabled"; + phys = <&comphy1 0>; }; diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts index 4bf6d2e..58557c6 100644 --- a/arch/arm/dts/armada-3720-uDPU.dts +++ b/arch/arm/dts/armada-3720-uDPU.dts @@ -106,36 +106,21 @@ }; }; -&comphy { - phy0 { - phy-type = <COMPHY_TYPE_SGMII1>; - phy-speed = <COMPHY_SPEED_1_25G>; - }; - - phy1 { - phy-type = <COMPHY_TYPE_SGMII0>; - phy-speed = <COMPHY_SPEED_1_25G>; - }; - - phy2 { - phy-type = <COMPHY_TYPE_USB3_HOST1>; - phy-speed = <COMPHY_SPEED_5G>; - }; -}; - ð0 { pinctrl-0 = <&pcie_pins>; status = "okay"; - phy-mode = "2500base-x"; + phy-mode = "sgmii"; managed = "in-band-status"; phy = <ðphy0>; + phys = <&comphy1 0>; }; ð1 { status = "okay"; - phy-mode = "2500base-x"; + phy-mode = "sgmii"; managed = "in-band-status"; phy = <ðphy1>; + phys = <&comphy0 1>; }; &i2c0 { diff --git a/arch/arm/dts/armada-37xx.dtsi b/arch/arm/dts/armada-37xx.dtsi index fec3460..bef6ef0 100644 --- a/arch/arm/dts/armada-37xx.dtsi +++ b/arch/arm/dts/armada-37xx.dtsi @@ -316,9 +316,23 @@ compatible = "marvell,mvebu-comphy", "marvell,comphy-armada-3700"; reg = <0x18300 0x28>, <0x1f300 0x3d000>; - mux-bitcount = <4>; - mux-lane-order = <1 0 2>; - max-lanes = <3>; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; }; }; diff --git a/arch/arm/dts/armada-xp-theadorable.dts b/arch/arm/dts/armada-xp-theadorable.dts index 6a1df87..24cc1cc 100644 --- a/arch/arm/dts/armada-xp-theadorable.dts +++ b/arch/arm/dts/armada-xp-theadorable.dts @@ -71,6 +71,8 @@ spi0 = &spi0; spi1 = &spi1; ethernet0 = ð0; + i2c0 = &i2c0; + i2c1 = &i2c1; }; memory { @@ -156,6 +158,16 @@ }; }; +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; +}; + &spi0 { status = "okay"; u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/ast2600-evb.dts b/arch/arm/dts/ast2600-evb.dts index 2abd313..05362d1 100644 --- a/arch/arm/dts/ast2600-evb.dts +++ b/arch/arm/dts/ast2600-evb.dts @@ -177,3 +177,13 @@ 0x08 0x04 0x08 0x04>; }; + +&hace { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&acry { + u-boot,dm-pre-reloc; + status = "okay"; +}; diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi index f121f54..31905fd 100644 --- a/arch/arm/dts/ast2600.dtsi +++ b/arch/arm/dts/ast2600.dtsi @@ -187,6 +187,23 @@ }; }; + hace: hace@1e6d0000 { + compatible = "aspeed,ast2600-hace"; + reg = <0x1e6d0000 0x200>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scu ASPEED_CLK_GATE_YCLK>; + status = "disabled"; + }; + + acry: acry@1e6fa000 { + compatible = "aspeed,ast2600-acry"; + reg = <0x1e6fa000 0x1000>, + <0x1e710000 0x10000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scu ASPEED_CLK_GATE_RSACLK>; + status = "disabled"; + }; + edac: sdram@1e6e0000 { compatible = "aspeed,ast2600-sdram-edac"; reg = <0x1e6e0000 0x174>; diff --git a/arch/arm/dts/bcm2711-rpi-4-b.dts b/arch/arm/dts/bcm2711-rpi-4-b.dts new file mode 100644 index 0000000..72ce80f --- /dev/null +++ b/arch/arm/dts/bcm2711-rpi-4-b.dts @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2711-rpi.dtsi" +#include "bcm283x-rpi-usb-peripheral.dtsi" + +/ { + compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; + model = "Raspberry Pi 4 Model B"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + leds { + led-act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1>, + <3300000 0x0>; + status = "okay"; + }; + + sd_vcc_reg: sd_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + +&expgpio { + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "GLOBAL_RESET", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "SD_PWR_ON", + ""; +}; + +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; + status = "okay"; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* EMMC2 is used to drive the SD card */ +&emmc2 { + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + broken-cd; + status = "okay"; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@1 { + /* No PHY interrupt */ + reg = <0x1>; + }; +}; + +&pcie0 { + pci@0,0 { + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + reg = <0 0 0 0 0>; + + usb@0,0 { + reg = <0 0 0 0 0>; + resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; + }; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; diff --git a/arch/arm/dts/bcm2711-rpi.dtsi b/arch/arm/dts/bcm2711-rpi.dtsi new file mode 100644 index 0000000..ca266c5 --- /dev/null +++ b/arch/arm/dts/bcm2711-rpi.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm2835-rpi.dtsi" + +#include <dt-bindings/reset/raspberrypi,firmware-reset.h> + +/ { + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0>; + }; + + aliases { + emmc2bus = &emmc2bus; + ethernet0 = &genet; + pcie0 = &pcie0; + blconfig = &blconfig; + }; +}; + +&firmware { + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + status = "okay"; + }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; +}; + +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; +}; + +&hvs { + clocks = <&firmware_clocks 4>; +}; + +&rmem { + /* + * RPi4's co-processor will copy the board's bootloader configuration + * into memory for the OS to consume. It'll also update this node with + * its placement information. + */ + blconfig: nvram@0 { + compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x0>; + no-map; + status = "disabled"; + }; +}; + +&vchiq { + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/dts/bcm2711.dtsi b/arch/arm/dts/bcm2711.dtsi new file mode 100644 index 0000000..3b60297 --- /dev/null +++ b/arch/arm/dts/bcm2711.dtsi @@ -0,0 +1,1100 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm283x.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/bcm2835-pm.h> + +/ { + compatible = "brcm,bcm2711"; + + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gicv2>; + + vc4: gpu { + compatible = "brcm,bcm2711-vc5"; + status = "disabled"; + }; + + clk_27MHz: clk-27M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + clock-output-names = "27MHz-clock"; + }; + + clk_108MHz: clk-108M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <108000000>; + clock-output-names = "108MHz-clock"; + }; + + soc { + /* + * Defined ranges: + * Common BCM283x peripherals + * BCM2711-specific peripherals + * ARM-local peripherals + */ + ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, + <0x7c000000 0x0 0xfc000000 0x02000000>, + <0x40000000 0x0 0xff800000 0x00800000>; + /* Emulate a contiguous 30-bit address range for DMA */ + dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>; + + /* + * This node is the provider for the enable-method for + * bringing up secondary cores. + */ + local_intc: local_intc@40000000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + }; + + gicv2: interrupt-controller@40041000 { + interrupt-controller; + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + reg = <0x40041000 0x1000>, + <0x40042000 0x2000>, + <0x40044000 0x2000>, + <0x40046000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + avs_monitor: avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; + }; + }; + + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xb00>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + /* DMA lite 7 - 10 */ + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x07f5>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>, + <0x7ec11000 0x20>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + rng@7e104000 { + compatible = "brcm,bcm2711-rng200"; + reg = <0x7e104000 0x28>; + }; + + uart2: serial@7e201400 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201400 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart3: serial@7e201600 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201600 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart4: serial@7e201800 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201800 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart5: serial@7e201a00 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201a00 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + spi3: spi@7e204600 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204600 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@7e204800 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204800 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@7e204a00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204a00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@7e204c00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204c00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@7e205600 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205600 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@7e205800 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205800 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@7e205a00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205a00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@7e205c00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205c00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pixelvalve0: pixelvalve@7e206000 { + compatible = "brcm,bcm2711-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve1: pixelvalve@7e207000 { + compatible = "brcm,bcm2711-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve2: pixelvalve@7e20a000 { + compatible = "brcm,bcm2711-pixelvalve2"; + reg = <0x7e20a000 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pwm1: pwm@7e20c800 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c800 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pixelvalve4: pixelvalve@7e216000 { + compatible = "brcm,bcm2711-pixelvalve4"; + reg = <0x7e216000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hvs: hvs@7e400000 { + compatible = "brcm,bcm2711-hvs"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + }; + + pixelvalve3: pixelvalve@7ec12000 { + compatible = "brcm,bcm2711-pixelvalve3"; + reg = <0x7ec12000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vec: vec@7ec13000 { + compatible = "brcm,bcm2711-vec"; + reg = <0x7ec13000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + dvp: clock@7ef00000 { + compatible = "brcm,brcm2711-dvp"; + reg = <0x7ef00000 0x10>; + clocks = <&clk_108MHz>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + aon_intr: interrupt-controller@7ef00100 { + compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; + reg = <0x7ef00100 0x30>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2711-hdmi0"; + reg = <0x7ef00700 0x300>, + <0x7ef00300 0x200>, + <0x7ef00f00 0x80>, + <0x7ef00f80 0x80>, + <0x7ef01b00 0x200>, + <0x7ef01f00 0x400>, + <0x7ef00200 0x80>, + <0x7ef04300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 0>; + interrupt-parent = <&aon_intr>; + interrupts = <0>, <1>, <2>, + <3>, <4>, <5>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "wakeup", "hpd-connected", "hpd-removed"; + ddc = <&ddc0>; + dmas = <&dma 10>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; + + hdmi1: hdmi@7ef05700 { + compatible = "brcm,bcm2711-hdmi1"; + reg = <0x7ef05700 0x300>, + <0x7ef05300 0x200>, + <0x7ef05f00 0x80>, + <0x7ef05f80 0x80>, + <0x7ef06b00 0x200>, + <0x7ef06f00 0x400>, + <0x7ef00280 0x80>, + <0x7ef09300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + ddc = <&ddc1>; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 1>; + interrupt-parent = <&aon_intr>; + interrupts = <8>, <7>, <6>, + <9>, <10>, <11>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "wakeup", "hpd-connected", "hpd-removed"; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc1: i2c@7ef09500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; + }; + + /* + * emmc2 has different DMA constraints based on SoC revisions. It was + * moved into its own bus, so as for RPi4's firmware to update them. + * The firmware will find whether the emmc2bus alias is defined, and if + * so, it'll edit the dma-ranges property below accordingly. + */ + emmc2bus: emmc2bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; + dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; + + emmc2: mmc@7e340000 { + compatible = "brcm,bcm2711-emmc2"; + reg = <0x0 0x7e340000 0x100>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2711_CLOCK_EMMC2>; + status = "disabled"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* This only applies to the ARMv7 stub */ + arm,cpu-registers-not-fw-configured; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000d8>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e8>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000f0>; + }; + }; + + scb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, + <0x6 0x00000000 0x6 0x00000000 0x40000000>; + + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 + IRQ_TYPE_LEVEL_HIGH>; + msi-controller; + msi-parent = <&pcie0>; + + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 + 0x0 0x04000000>; + /* + * The wrapper around the PCIe block has a bug + * preventing it from accessing beyond the first 3GB of + * memory. + */ + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 + 0x0 0xc0000000>; + brcm,enable-ssc; + }; + + genet: ethernet@7d580000 { + compatible = "brcm,bcm2711-genet-v5"; + reg = <0x0 0x7d580000 0x10000>; + #address-cells = <0x1>; + #size-cells = <0x1>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + genet_mdio: mdio@e14 { + compatible = "brcm,genet-mdio-v5"; + reg = <0xe14 0x8>; + reg-names = "mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + }; + }; +}; + +&clk_osc { + clock-frequency = <54000000>; +}; + +&clocks { + compatible = "brcm,bcm2711-cprman"; +}; + +&cpu_thermal { + coefficients = <(-487) 410040>; + thermal-sensors = <&thermal>; +}; + +&dsi0 { + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; +}; + +&dsi1 { + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + compatible = "brcm,bcm2711-dsi1"; +}; + +&gpio { + compatible = "brcm,bcm2711-gpio"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + + gpclk0_gpio49: gpclk0_gpio49 { + pin-gpclk { + pins = "gpio49"; + function = "alt1"; + bias-disable; + }; + }; + gpclk1_gpio50: gpclk1_gpio50 { + pin-gpclk { + pins = "gpio50"; + function = "alt1"; + bias-disable; + }; + }; + gpclk2_gpio51: gpclk2_gpio51 { + pin-gpclk { + pins = "gpio51"; + function = "alt1"; + bias-disable; + }; + }; + + i2c0_gpio46: i2c0_gpio46 { + pin-sda { + function = "alt0"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt0"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c1_gpio46: i2c1_gpio46 { + pin-sda { + function = "alt1"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt1"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c3_gpio2: i2c3_gpio2 { + pin-sda { + function = "alt5"; + pins = "gpio2"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio3"; + bias-disable; + }; + }; + i2c3_gpio4: i2c3_gpio4 { + pin-sda { + function = "alt5"; + pins = "gpio4"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio5"; + bias-disable; + }; + }; + i2c4_gpio6: i2c4_gpio6 { + pin-sda { + function = "alt5"; + pins = "gpio6"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio7"; + bias-disable; + }; + }; + i2c4_gpio8: i2c4_gpio8 { + pin-sda { + function = "alt5"; + pins = "gpio8"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio9"; + bias-disable; + }; + }; + i2c5_gpio10: i2c5_gpio10 { + pin-sda { + function = "alt5"; + pins = "gpio10"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio11"; + bias-disable; + }; + }; + i2c5_gpio12: i2c5_gpio12 { + pin-sda { + function = "alt5"; + pins = "gpio12"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio13"; + bias-disable; + }; + }; + i2c6_gpio0: i2c6_gpio0 { + pin-sda { + function = "alt5"; + pins = "gpio0"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio1"; + bias-disable; + }; + }; + i2c6_gpio22: i2c6_gpio22 { + pin-sda { + function = "alt5"; + pins = "gpio22"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio23"; + bias-disable; + }; + }; + i2c_slave_gpio8: i2c_slave_gpio8 { + pins-i2c-slave { + pins = "gpio8", + "gpio9", + "gpio10", + "gpio11"; + function = "alt3"; + }; + }; + + jtag_gpio48: jtag_gpio48 { + pins-jtag { + pins = "gpio48", + "gpio49", + "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt4"; + }; + }; + + mii_gpio28: mii_gpio28 { + pins-mii { + pins = "gpio28", + "gpio29", + "gpio30", + "gpio31"; + function = "alt4"; + }; + }; + mii_gpio36: mii_gpio36 { + pins-mii { + pins = "gpio36", + "gpio37", + "gpio38", + "gpio39"; + function = "alt5"; + }; + }; + + pcm_gpio50: pcm_gpio50 { + pins-pcm { + pins = "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt2"; + }; + }; + + pwm0_0_gpio12: pwm0_0_gpio12 { + pin-pwm { + pins = "gpio12"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio18: pwm0_0_gpio18 { + pin-pwm { + pins = "gpio18"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_0_gpio40: pwm1_0_gpio40 { + pin-pwm { + pins = "gpio40"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio13: pwm0_1_gpio13 { + pin-pwm { + pins = "gpio13"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio19: pwm0_1_gpio19 { + pin-pwm { + pins = "gpio19"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_1_gpio41: pwm1_1_gpio41 { + pin-pwm { + pins = "gpio41"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio45: pwm0_1_gpio45 { + pin-pwm { + pins = "gpio45"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio52: pwm0_0_gpio52 { + pin-pwm { + pins = "gpio52"; + function = "alt1"; + bias-disable; + }; + }; + pwm0_1_gpio53: pwm0_1_gpio53 { + pin-pwm { + pins = "gpio53"; + function = "alt1"; + bias-disable; + }; + }; + + rgmii_gpio35: rgmii_gpio35 { + pin-start-stop { + pins = "gpio35"; + function = "alt4"; + }; + pin-rx-ok { + pins = "gpio36"; + function = "alt4"; + }; + }; + rgmii_irq_gpio34: rgmii_irq_gpio34 { + pin-irq { + pins = "gpio34"; + function = "alt5"; + }; + }; + rgmii_irq_gpio39: rgmii_irq_gpio39 { + pin-irq { + pins = "gpio39"; + function = "alt4"; + }; + }; + rgmii_mdio_gpio28: rgmii_mdio_gpio28 { + pins-mdio { + pins = "gpio28", + "gpio29"; + function = "alt5"; + }; + }; + rgmii_mdio_gpio37: rgmii_mdio_gpio37 { + pins-mdio { + pins = "gpio37", + "gpio38"; + function = "alt4"; + }; + }; + + spi0_gpio46: spi0_gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49"; + function = "alt2"; + }; + }; + spi2_gpio46: spi2_gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49", + "gpio50"; + function = "alt5"; + }; + }; + spi3_gpio0: spi3_gpio0 { + pins-spi { + pins = "gpio0", + "gpio1", + "gpio2", + "gpio3"; + function = "alt3"; + }; + }; + spi4_gpio4: spi4_gpio4 { + pins-spi { + pins = "gpio4", + "gpio5", + "gpio6", + "gpio7"; + function = "alt3"; + }; + }; + spi5_gpio12: spi5_gpio12 { + pins-spi { + pins = "gpio12", + "gpio13", + "gpio14", + "gpio15"; + function = "alt3"; + }; + }; + spi6_gpio18: spi6_gpio18 { + pins-spi { + pins = "gpio18", + "gpio19", + "gpio20", + "gpio21"; + function = "alt3"; + }; + }; + + uart2_gpio0: uart2_gpio0 { + pin-tx { + pins = "gpio0"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio1"; + function = "alt4"; + bias-pull-up; + }; + }; + uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { + pin-cts { + pins = "gpio2"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio3"; + function = "alt4"; + bias-disable; + }; + }; + uart3_gpio4: uart3_gpio4 { + pin-tx { + pins = "gpio4"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio5"; + function = "alt4"; + bias-pull-up; + }; + }; + uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { + pin-cts { + pins = "gpio6"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio7"; + function = "alt4"; + bias-disable; + }; + }; + uart4_gpio8: uart4_gpio8 { + pin-tx { + pins = "gpio8"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio9"; + function = "alt4"; + bias-pull-up; + }; + }; + uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { + pin-cts { + pins = "gpio10"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio11"; + function = "alt4"; + bias-disable; + }; + }; + uart5_gpio12: uart5_gpio12 { + pin-tx { + pins = "gpio12"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio13"; + function = "alt4"; + bias-pull-up; + }; + }; + uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { + pin-cts { + pins = "gpio14"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio15"; + function = "alt4"; + bias-disable; + }; + }; +}; + +&rmem { + #address-cells = <2>; +}; + +&cma { + /* + * arm64 reserves the CMA by default somewhere in ZONE_DMA32, + * that's not good enough for the BCM2711 as some devices can + * only address the lower 1G of memory (ZONE_DMA). + */ + alloc-ranges = <0x0 0x00000000 0x40000000>; +}; + +&i2c0 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c1 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mailbox { + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhci { + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhost { + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi { + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi2 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&system_timer { + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; +}; + +&txp { + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart0 { + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; +}; + +&vec { + compatible = "brcm,bcm2711-vec"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/dts/bcm2835-common.dtsi b/arch/arm/dts/bcm2835-common.dtsi new file mode 100644 index 0000000..c25e797 --- /dev/null +++ b/arch/arm/dts/bcm2835-common.dtsi @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations. + */ + +/ { + interrupt-parent = <&intc>; + + soc { + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + /* dma channel 11-14 share one irq */ + <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ + <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + + intc: interrupt-controller@7e00b200 { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + rng@7e104000 { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + interrupts = <2 29>; + }; + + pixelvalve@7e206000 { + compatible = "brcm,bcm2835-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <2 13>; /* pwa0 */ + }; + + pixelvalve@7e207000 { + compatible = "brcm,bcm2835-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <2 14>; /* pwa1 */ + }; + + thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + }; + + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + }; +}; + +&cpu_thermal { + thermal-sensors = <&thermal>; +}; + +&gpio { + i2c_slave_gpio18: i2c_slave_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + jtag_gpio4: jtag_gpio4 { + brcm,pins = <4 5 6 12 13>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + + pwm0_gpio12: pwm0_gpio12 { + brcm,pins = <12>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm0_gpio18: pwm0_gpio18 { + brcm,pins = <18>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm0_gpio40: pwm0_gpio40 { + brcm,pins = <40>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio13: pwm1_gpio13 { + brcm,pins = <13>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio19: pwm1_gpio19 { + brcm,pins = <19>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm1_gpio41: pwm1_gpio41 { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio45: pwm1_gpio45 { + brcm,pins = <45>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&i2s { + dmas = <&dma 2>, <&dma 3>; + dma-names = "tx", "rx"; +}; + +&sdhost { + dmas = <&dma 13>; + dma-names = "rx-tx"; +}; + +&spi { + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; +}; diff --git a/arch/arm/dts/bcm2835-rpi-a-plus.dts b/arch/arm/dts/bcm2835-rpi-a-plus.dts index db8a601..40b9405 100644 --- a/arch/arm/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/dts/bcm2835-rpi-a-plus.dts @@ -8,12 +8,17 @@ compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; model = "Raspberry Pi Model A+"; + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; + leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; @@ -99,6 +104,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -107,6 +114,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/dts/bcm2835-rpi-a.dts b/arch/arm/dts/bcm2835-rpi-a.dts index 067d1f0..11edb58 100644 --- a/arch/arm/dts/bcm2835-rpi-a.dts +++ b/arch/arm/dts/bcm2835-rpi-a.dts @@ -8,8 +8,13 @@ compatible = "raspberrypi,model-a", "brcm,bcm2835"; model = "Raspberry Pi Model A"; + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; + leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; @@ -94,6 +99,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -102,6 +109,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/dts/bcm2835-rpi-b-plus.dts b/arch/arm/dts/bcm2835-rpi-b-plus.dts index 1e40d67..1b435c6 100644 --- a/arch/arm/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/dts/bcm2835-rpi-b-plus.dts @@ -9,12 +9,17 @@ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; model = "Raspberry Pi Model B+"; + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; @@ -101,6 +106,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -109,6 +116,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/dts/bcm2835-rpi-b-rev2.dts index 28e7513..a23c25c 100644 --- a/arch/arm/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/dts/bcm2835-rpi-b-rev2.dts @@ -9,8 +9,13 @@ compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; model = "Raspberry Pi Model B rev2"; + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; + leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; @@ -94,6 +99,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -102,6 +109,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/dts/bcm2835-rpi-b.dts b/arch/arm/dts/bcm2835-rpi-b.dts index 31ff602..1b63d6b 100644 --- a/arch/arm/dts/bcm2835-rpi-b.dts +++ b/arch/arm/dts/bcm2835-rpi-b.dts @@ -9,8 +9,13 @@ compatible = "raspberrypi,model-b", "brcm,bcm2835"; model = "Raspberry Pi Model B"; + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; + leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; @@ -89,6 +94,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -97,6 +104,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/dts/bcm2835-rpi-cm1-io1.dts index 4764a25..a75c882 100644 --- a/arch/arm/dts/bcm2835-rpi-cm1-io1.dts +++ b/arch/arm/dts/bcm2835-rpi-cm1-io1.dts @@ -79,6 +79,15 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; }; &uart0 { diff --git a/arch/arm/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/dts/bcm2835-rpi-cm1.dtsi index ef22c2d..e4e6b6a 100644 --- a/arch/arm/dts/bcm2835-rpi-cm1.dtsi +++ b/arch/arm/dts/bcm2835-rpi-cm1.dtsi @@ -5,11 +5,16 @@ / { leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + reg_3v3: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "3V3"; diff --git a/arch/arm/dts/bcm2835-rpi-common.dtsi b/arch/arm/dts/bcm2835-rpi-common.dtsi new file mode 100644 index 0000000..8a55b6c --- /dev/null +++ b/arch/arm/dts/bcm2835-rpi-common.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's + * firmware interface. + */ + +#include <dt-bindings/power/raspberrypi-power.h> + +&v3d { + power-domains = <&power RPI_POWER_DOMAIN_V3D>; +}; diff --git a/arch/arm/dts/bcm2835-rpi-zero-w.dts b/arch/arm/dts/bcm2835-rpi-zero-w.dts index ba0167d..33b2b77 100644 --- a/arch/arm/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/dts/bcm2835-rpi-zero-w.dts @@ -12,14 +12,19 @@ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; model = "Raspberry Pi Zero W"; + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + chosen { /* 8250 auxiliary UART instead of pl011 */ stdout-path = "serial1:115200n8"; }; leds { - act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + led-act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; @@ -100,12 +105,16 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &sdhci { #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; + bus-width = <4>; mmc-pwrseq = <&wifi_pwrseq>; non-removable; status = "okay"; @@ -116,6 +125,13 @@ }; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; diff --git a/arch/arm/dts/bcm2835-rpi-zero.dts b/arch/arm/dts/bcm2835-rpi-zero.dts index 3b35a8a..6f9b3a9 100644 --- a/arch/arm/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/dts/bcm2835-rpi-zero.dts @@ -12,8 +12,13 @@ compatible = "raspberrypi,model-zero", "brcm,bcm2835"; model = "Raspberry Pi Zero"; + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; }; @@ -96,6 +101,15 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; }; &uart0 { diff --git a/arch/arm/dts/bcm2835-rpi.dtsi b/arch/arm/dts/bcm2835-rpi.dtsi index 715d50c..87ddcad 100644 --- a/arch/arm/dts/bcm2835-rpi.dtsi +++ b/arch/arm/dts/bcm2835-rpi.dtsi @@ -1,15 +1,10 @@ #include <dt-bindings/power/raspberrypi-power.h> / { - memory@0 { - device_type = "memory"; - reg = <0 0x10000000>; - }; - leds { compatible = "gpio-leds"; - act { + led-act { label = "ACT"; default-state = "keep"; linux,default-trigger = "heartbeat"; @@ -18,8 +13,12 @@ soc { firmware: firmware { - compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + mboxes = <&mailbox>; + dma-ranges; }; power: power { @@ -64,32 +63,10 @@ clock-frequency = <100000>; }; -&i2c2 { - status = "okay"; -}; - -&sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio48>; - bus-width = <4>; -}; - -&sdhost { - pinctrl-names = "default"; - pinctrl-0 = <&sdhost_gpio48>; - status = "okay"; - bus-width = <4>; -}; - &usb { power-domains = <&power RPI_POWER_DOMAIN_USB>; }; -&hdmi { - power-domains = <&power RPI_POWER_DOMAIN_HDMI>; - status = "okay"; -}; - &vec { power-domains = <&power RPI_POWER_DOMAIN_VEC>; status = "okay"; diff --git a/arch/arm/dts/bcm2835.dtsi b/arch/arm/dts/bcm2835.dtsi index a5c3824..0549686 100644 --- a/arch/arm/dts/bcm2835.dtsi +++ b/arch/arm/dts/bcm2835.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2835"; diff --git a/arch/arm/dts/bcm2836-rpi-2-b.dts b/arch/arm/dts/bcm2836-rpi-2-b.dts index 7b4e651..d8af8ee 100644 --- a/arch/arm/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/dts/bcm2836-rpi-2-b.dts @@ -10,15 +10,16 @@ model = "Raspberry Pi 2 Model B"; memory@0 { + device_type = "memory"; reg = <0 0x40000000>; }; leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; @@ -105,6 +106,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -113,6 +116,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/dts/bcm2836.dtsi b/arch/arm/dts/bcm2836.dtsi index c933e84..b390006 100644 --- a/arch/arm/dts/bcm2836.dtsi +++ b/arch/arm/dts/bcm2836.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2836"; diff --git a/arch/arm/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/dts/bcm2837-rpi-3-a-plus.dts index 7f4437a..77099a7 100644 --- a/arch/arm/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/dts/bcm2837-rpi-3-a-plus.dts @@ -14,17 +14,20 @@ }; memory@0 { + device_type = "memory"; reg = <0 0x20000000>; }; leds { - act { + led-act { gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; }; }; }; @@ -117,6 +120,8 @@ &hdmi { hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { diff --git a/arch/arm/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/dts/bcm2837-rpi-3-b-plus.dts index c6fa34c..6101026 100644 --- a/arch/arm/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/dts/bcm2837-rpi-3-b-plus.dts @@ -15,17 +15,20 @@ }; memory@0 { + device_type = "memory"; reg = <0 0x40000000>; }; leds { - act { + led-act { gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; }; - pwr { + led-pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; }; }; @@ -124,6 +127,8 @@ &hdmi { hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { diff --git a/arch/arm/dts/bcm2837-rpi-3-b.dts b/arch/arm/dts/bcm2837-rpi-3-b.dts index ce71f57..dd4a486 100644 --- a/arch/arm/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/dts/bcm2837-rpi-3-b.dts @@ -15,11 +15,12 @@ }; memory@0 { + device_type = "memory"; reg = <0 0x40000000>; }; leds { - act { + led-act { gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; }; }; @@ -125,6 +126,8 @@ &hdmi { hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; /* uart0 communicates with the BT module */ diff --git a/arch/arm/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/dts/bcm2837-rpi-cm3-io3.dts index 6c8233a..588d941 100644 --- a/arch/arm/dts/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/dts/bcm2837-rpi-cm3-io3.dts @@ -78,6 +78,15 @@ &hdmi { hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; }; &uart0 { diff --git a/arch/arm/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/dts/bcm2837-rpi-cm3.dtsi index 81399b2..828a205 100644 --- a/arch/arm/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/dts/bcm2837-rpi-cm3.dtsi @@ -5,9 +5,18 @@ / { memory@0 { + device_type = "memory"; reg = <0 0x40000000>; }; + leds { + /* + * Since there is no upstream GPIO driver yet, + * remove the incomplete node. + */ + /delete-node/ led-act; + }; + reg_3v3: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "3V3"; diff --git a/arch/arm/dts/bcm2837.dtsi b/arch/arm/dts/bcm2837.dtsi index beb6c50..0199ec9 100644 --- a/arch/arm/dts/bcm2837.dtsi +++ b/arch/arm/dts/bcm2837.dtsi @@ -1,4 +1,6 @@ #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" +#include "bcm2835-rpi-common.dtsi" / { compatible = "brcm,bcm2837"; diff --git a/arch/arm/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/dts/bcm283x-rpi-usb-peripheral.dtsi new file mode 100644 index 0000000..0ff0e9e --- /dev/null +++ b/arch/arm/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +&usb { + dr_mode = "peripheral"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; diff --git a/arch/arm/dts/bcm283x.dtsi b/arch/arm/dts/bcm283x.dtsi index 9777644..a3e06b6 100644 --- a/arch/arm/dts/bcm283x.dtsi +++ b/arch/arm/dts/bcm283x.dtsi @@ -18,7 +18,6 @@ / { compatible = "brcm,bcm2835"; model = "BCM2835"; - interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; @@ -31,16 +30,27 @@ stdout-path = "serial0:115200n8"; }; + rmem: reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + size = <0x4000000>; /* 64MB */ + reusable; + linux,cma-default; + }; + }; + thermal-zones { cpu_thermal: cpu-thermal { polling-delay-passive = <0>; polling-delay = <1000>; - thermal-sensors = <&thermal>; - trips { cpu-crit { - temperature = <80000>; + temperature = <90000>; hysteresis = <0>; type = "critical"; }; @@ -56,7 +66,7 @@ #address-cells = <1>; #size-cells = <1>; - timer@7e003000 { + system_timer: timer@7e003000 { compatible = "brcm,bcm2835-system-timer"; reg = <0x7e003000 0x1000>; interrupts = <1 0>, <1 1>, <1 2>, <1 3>; @@ -67,74 +77,12 @@ clock-frequency = <1000000>; }; - txp@7e004000 { + txp: txp@7e004000 { compatible = "brcm,bcm2835-txp"; reg = <0x7e004000 0x20>; interrupts = <1 11>; }; - dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - /* dma channel 11-14 share one irq */ - <1 27>, - <1 27>, - <1 27>, - <1 27>, - /* unused shared irq for all channels */ - <1 28>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14", - "dma-shared-all"; - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; - }; - - intc: interrupt-controller@7e00b200 { - compatible = "brcm,bcm2835-armctrl-ic"; - reg = <0x7e00b200 0x200>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; - #reset-cells = <1>; - reg = <0x7e100000 0x114>, - <0x7e00a000 0x24>; - clocks = <&clocks BCM2835_CLOCK_V3D>, - <&clocks BCM2835_CLOCK_PERI_IMAGE>, - <&clocks BCM2835_CLOCK_H264>, - <&clocks BCM2835_CLOCK_ISP>; - clock-names = "v3d", "peri_image", "h264", "isp"; - system-power-controller; - }; - clocks: cprman@7e101000 { compatible = "brcm,bcm2835-cprman"; #clock-cells = <1>; @@ -149,12 +97,6 @@ <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; }; - rng@7e104000 { - compatible = "brcm,bcm2835-rng"; - reg = <0x7e104000 0x10>; - interrupts = <2 29>; - }; - mailbox: mailbox@7e00b880 { compatible = "brcm,bcm2835-mbox"; reg = <0x7e00b880 0x40>; @@ -184,8 +126,7 @@ interrupt-controller; #interrupt-cells = <2>; - /* Defines pin muxing groups according to - * BCM2835-ARM-Peripherals.pdf page 102. + /* Defines common pin muxing groups * * While each pin can have its mux selected * for various functions individually, some @@ -263,15 +204,7 @@ brcm,pins = <44 45>; brcm,function = <BCM2835_FSEL_ALT2>; }; - i2c_slave_gpio18: i2c_slave_gpio18 { - brcm,pins = <18 19 20 21>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - jtag_gpio4: jtag_gpio4 { - brcm,pins = <4 5 6 12 13>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; jtag_gpio22: jtag_gpio22 { brcm,pins = <22 23 24 25 26 27>; brcm,function = <BCM2835_FSEL_ALT4>; @@ -286,35 +219,6 @@ brcm,function = <BCM2835_FSEL_ALT2>; }; - pwm0_gpio12: pwm0_gpio12 { - brcm,pins = <12>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm0_gpio18: pwm0_gpio18 { - brcm,pins = <18>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm0_gpio40: pwm0_gpio40 { - brcm,pins = <40>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio13: pwm1_gpio13 { - brcm,pins = <13>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio19: pwm1_gpio19 { - brcm,pins = <19>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm1_gpio41: pwm1_gpio41 { - brcm,pins = <41>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio45: pwm1_gpio45 { - brcm,pins = <45>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - sdhost_gpio48: sdhost_gpio48 { brcm,pins = <48 49 50 51 52 53>; brcm,function = <BCM2835_FSEL_ALT0>; @@ -396,8 +300,8 @@ }; uart0: serial@7e201000 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201000 0x1000>; + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201000 0x200>; interrupts = <2 25>; clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; @@ -410,8 +314,6 @@ reg = <0x7e202000 0x100>; interrupts = <2 24>; clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 13>; - dma-names = "rx-tx"; status = "disabled"; }; @@ -419,16 +321,12 @@ compatible = "brcm,bcm2835-i2s"; reg = <0x7e203000 0x24>; clocks = <&clocks BCM2835_CLOCK_PCM>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; status = "disabled"; }; spi: spi@7e204000 { compatible = "brcm,bcm2835-spi"; - reg = <0x7e204000 0x1000>; + reg = <0x7e204000 0x200>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; @@ -438,7 +336,7 @@ i2c0: i2c@7e205000 { compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205000 0x1000>; + reg = <0x7e205000 0x200>; interrupts = <2 21>; clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; @@ -446,18 +344,6 @@ status = "disabled"; }; - pixelvalve@7e206000 { - compatible = "brcm,bcm2835-pixelvalve0"; - reg = <0x7e206000 0x100>; - interrupts = <2 13>; /* pwa0 */ - }; - - pixelvalve@7e207000 { - compatible = "brcm,bcm2835-pixelvalve1"; - reg = <0x7e207000 0x100>; - interrupts = <2 14>; /* pwa1 */ - }; - dpi: dpi@7e208000 { compatible = "brcm,bcm2835-dpi"; reg = <0x7e208000 0x8c>; @@ -486,13 +372,6 @@ "dsi0_ddr2", "dsi0_ddr"; - }; - - thermal: thermal@7e212000 { - compatible = "brcm,bcm2835-thermal"; - reg = <0x7e212000 0x8>; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -541,7 +420,7 @@ status = "disabled"; }; - sdhci: sdhci@7e300000 { + sdhci: mmc@7e300000 { compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; interrupts = <2 30>; @@ -585,44 +464,6 @@ status = "disabled"; }; - i2c2: i2c@7e805000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e805000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; - status = "disabled"; - }; - - pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ - }; - - hdmi: hdmi@7e902000 { - compatible = "brcm,bcm2835-hdmi"; - reg = <0x7e902000 0x600>, - <0x7e808000 0x100>; - interrupts = <2 8>, <2 9>; - ddc = <&i2c2>; - clocks = <&clocks BCM2835_PLLH_PIX>, - <&clocks BCM2835_CLOCK_HSM>; - clock-names = "pixel", "hdmi"; - dmas = <&dma 17>; - dma-names = "audio-rx"; - status = "disabled"; - }; - usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; @@ -634,36 +475,19 @@ phys = <&usbphy>; phy-names = "usb2-phy"; }; - - v3d: v3d@7ec00000 { - compatible = "brcm,bcm2835-v3d"; - reg = <0x7ec00000 0x1000>; - interrupts = <1 10>; - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; - }; - - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; }; clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - /* The oscillator is the root of the clock tree. */ - clk_osc: clock@3 { + clk_osc: clk-osc { compatible = "fixed-clock"; - reg = <3>; #clock-cells = <0>; clock-output-names = "osc"; clock-frequency = <19200000>; }; - clk_usb: clock@4 { + clk_usb: clk-usb { compatible = "fixed-clock"; - reg = <4>; #clock-cells = <0>; clock-output-names = "otg"; clock-frequency = <480000000>; diff --git a/arch/arm/dts/bcm7xxx.dts b/arch/arm/dts/bcm7xxx.dts new file mode 100644 index 0000000..786ce3f --- /dev/null +++ b/arch/arm/dts/bcm7xxx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Empty devicetre file for bcm7260 board + * + * This is required to make the board build with CONFIG OF_SEPARATE + * In-tree document explains how to obtain a real devicetree using 'bolt' but + * I did not attempt this. + * + * Copyright 2021 Google LLC + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/dts/highbank.dts b/arch/arm/dts/highbank.dts new file mode 100644 index 0000000..1480bad --- /dev/null +++ b/arch/arm/dts/highbank.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Empty devicetree for highbank/midway + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/dts/juno-base.dtsi b/arch/arm/dts/juno-base.dtsi new file mode 100644 index 0000000..6288e10 --- /dev/null +++ b/arch/arm/dts/juno-base.dtsi @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "juno-clocks.dtsi" +#include "juno-motherboard.dtsi" + +/ { + /* + * Devices shared by all Juno boards + */ + + memtimer: timer@2a810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x2a810000 0x0 0x10000>; + clock-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x2a820000 0x20000>; + status = "disabled"; + frame@2a830000 { + frame-number = <1>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x10000 0x10000>; + }; + }; + + mailbox: mhu@2b1f0000 { + compatible = "arm,mhu", "arm,primecell"; + reg = <0x0 0x2b1f0000 0x0 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + clocks = <&soc_refclk100mhz>; + clock-names = "apb_pclk"; + }; + + smmu_gpu: iommu@2b400000 { + compatible = "arm,mmu-400", "arm,smmu-v1"; + reg = <0x0 0x2b400000 0x0 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + status = "disabled"; + }; + + smmu_pcie: iommu@2b500000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x2b500000 0x0 0x10000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + + smmu_etr: iommu@2b600000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x2b600000 0x0 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + power-domains = <&scpi_devpd 0>; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <1>; + #interrupt-cells = <3>; + #size-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + ranges = <0 0 0x2c1c0000 0x40000>; + + v2m_0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0x10000>; + }; + + v2m@10000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x10000 0x10000>; + }; + + v2m@20000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x20000 0x10000>; + }; + + v2m@30000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x30000 0x10000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* + * Juno TRMs specify the size for these coresight components as 64K. + * The actual size is just 4K though 64K is reserved. Access to the + * unmapped reserved region results in a DECERR response. + */ + etf@20010000 { /* etf0 */ + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20010000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + in-ports { + port { + etf0_in_port: endpoint { + remote-endpoint = <&main_funnel_out_port>; + }; + }; + }; + + out-ports { + port { + etf0_out_port: endpoint { + }; + }; + }; + }; + + tpiu@20030000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0x20030000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + + /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ + main_funnel: funnel@20040000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x20040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + out-ports { + port { + main_funnel_out_port: endpoint { + remote-endpoint = <&etf0_in_port>; + }; + }; + }; + + main_funnel_in_ports: in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + main_funnel_in_port0: endpoint { + remote-endpoint = <&cluster0_funnel_out_port>; + }; + }; + + port@1 { + reg = <1>; + main_funnel_in_port1: endpoint { + remote-endpoint = <&cluster1_funnel_out_port>; + }; + }; + }; + }; + + etr@20070000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20070000 0 0x1000>; + iommus = <&smmu_etr 0>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + arm,scatter-gather; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + }; + + stm@20100000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x20100000 0 0x1000>, + <0 0x28000000 0 0x1000000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + stm_out_port: endpoint { + }; + }; + }; + }; + + replicator@20120000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x20120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + }; + in-ports { + port { + replicator_in_port0: endpoint { + }; + }; + }; + }; + + cpu_debug0: cpu-debug@22010000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x22010000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm0: etm@22040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x22040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster0_etm0_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port0>; + }; + }; + }; + }; + + funnel@220c0000 { /* cluster0 funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x220c0000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster0_funnel_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster0_funnel_in_port0: endpoint { + remote-endpoint = <&cluster0_etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + cluster0_funnel_in_port1: endpoint { + remote-endpoint = <&cluster0_etm1_out_port>; + }; + }; + }; + }; + + cpu_debug1: cpu-debug@22110000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x22110000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm1: etm@22140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x22140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster0_etm1_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port1>; + }; + }; + }; + }; + + cpu_debug2: cpu-debug@23010000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23010000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm2: etm@23040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_etm0_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port0>; + }; + }; + }; + }; + + funnel@230c0000 { /* cluster1 funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x230c0000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_funnel_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster1_funnel_in_port0: endpoint { + remote-endpoint = <&cluster1_etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + cluster1_funnel_in_port1: endpoint { + remote-endpoint = <&cluster1_etm1_out_port>; + }; + }; + port@2 { + reg = <2>; + cluster1_funnel_in_port2: endpoint { + remote-endpoint = <&cluster1_etm2_out_port>; + }; + }; + port@3 { + reg = <3>; + cluster1_funnel_in_port3: endpoint { + remote-endpoint = <&cluster1_etm3_out_port>; + }; + }; + }; + }; + + cpu_debug3: cpu-debug@23110000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23110000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm3: etm@23140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_etm1_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port1>; + }; + }; + }; + }; + + cpu_debug4: cpu-debug@23210000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23210000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm4: etm@23240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23240000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_etm2_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port2>; + }; + }; + }; + }; + + cpu_debug5: cpu-debug@23310000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23310000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm5: etm@23340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23340000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_etm3_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port3>; + }; + }; + }; + }; + + gpu: gpu@2d000000 { + compatible = "arm,juno-mali", "arm,mali-t624"; + reg = <0 0x2d000000 0 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&scpi_dvfs 2>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + /* The SMMU is only really of interest to bare-metal hypervisors */ + /* iommus = <&smmu_gpu 0>; */ + status = "disabled"; + }; + + sram: sram@2e000000 { + compatible = "arm,juno-sram-ns", "mmio-sram"; + reg = <0x0 0x2e000000 0x0 0x8000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x2e000000 0x8000>; + + cpu_scp_lpri: scp-sram@0 { + compatible = "arm,juno-scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-sram@200 { + compatible = "arm,juno-scp-shmem"; + reg = <0x200 0x200>; + }; + }; + + pcie_ctlr: pcie@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + /* Standard AXI Translation entries as programmed by EDK2 */ + dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>, + <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>, + <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&v2m_0>; + status = "disabled"; + iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ + iommu-map = <0x0 &smmu_pcie 0x0 0x1>; + }; + + scpi { + compatible = "arm,scpi"; + mboxes = <&mailbox 1>; + shmem = <&cpu_scp_hpri>; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: clocks-0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "atlclk", "aplclk","gpuclk"; + }; + scpi_clk: clocks-1 { + compatible = "arm,scpi-variable-clocks"; + #clock-cells = <1>; + clock-indices = <3>; + clock-output-names = "pxlclk"; + }; + }; + + scpi_devpd: power-controller { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + pmic { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 0>; + }; + + soc { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 3>; + }; + + big_cluster_thermal_zone: big-cluster { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 21>; + status = "disabled"; + }; + + little_cluster_thermal_zone: little-cluster { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 22>; + status = "disabled"; + }; + + gpu0_thermal_zone: gpu0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 23>; + status = "disabled"; + }; + + gpu1_thermal_zone: gpu1 { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 24>; + status = "disabled"; + }; + }; + + smmu_dma: iommu@7fb00000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb00000 0x0 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + }; + + smmu_hdlcd1: iommu@7fb10000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb10000 0x0 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + }; + + smmu_hdlcd0: iommu@7fb20000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb20000 0x0 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + }; + + smmu_usb: iommu@7fb30000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb30000 0x0 0x10000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + }; + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_dma 0>, + <&smmu_dma 1>, + <&smmu_dma 2>, + <&smmu_dma 3>, + <&smmu_dma 4>, + <&smmu_dma 5>, + <&smmu_dma 6>, + <&smmu_dma 7>, + <&smmu_dma 8>; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + hdlcd@7ff50000 { + compatible = "arm,hdlcd"; + reg = <0 0x7ff50000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_hdlcd1 0>; + clocks = <&scpi_clk 3>; + clock-names = "pxlclk"; + + port { + hdlcd1_output: endpoint { + remote-endpoint = <&tda998x_1_input>; + }; + }; + }; + + hdlcd@7ff60000 { + compatible = "arm,hdlcd"; + reg = <0 0x7ff60000 0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_hdlcd0 0>; + clocks = <&scpi_clk 3>; + clock-names = "pxlclk"; + + port { + hdlcd0_output: endpoint { + remote-endpoint = <&tda998x_0_input>; + }; + }; + }; + + soc_uart0: serial@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + hdmi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + port { + tda998x_0_input: endpoint { + remote-endpoint = <&hdlcd0_output>; + }; + }; + }; + + hdmi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + port { + tda998x_1_input: endpoint { + remote-endpoint = <&hdlcd1_output>; + }; + }; + }; + }; + + usb@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_usb 0>; + clocks = <&soc_usb48mhz>; + }; + + usb@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_usb 0>; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + memory@80000000 { + device_type = "memory"; + /* last 16MB of the first memory area is reserved for secure world use by firmware */ + reg = <0x00000000 0x80000000 0x0 0x7f000000>, + <0x00000008 0x80000000 0x1 0x80000000>; + }; + + bus@8000000 { + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + }; + + site2: tlx-bus@60000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x60000000 0x10000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0>; + interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm/dts/juno-clocks.dtsi b/arch/arm/dts/juno-clocks.dtsi new file mode 100644 index 0000000..b0f8cca --- /dev/null +++ b/arch/arm/dts/juno-clocks.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * ARM Juno Platform clocks + * + * Copyright (c) 2013-2014 ARM Ltd + * + * This file is licensed under a dual GPLv2 or BSD license. + * + */ +/ { + /* SoC fixed clocks */ + soc_uartclk: refclk7372800hz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <7372800>; + clock-output-names = "juno:uartclk"; + }; + + soc_usb48mhz: clk48mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "clk48mhz"; + }; + + soc_smc50mhz: clk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "smc_clk"; + }; + + soc_refclk100mhz: refclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "apb_pclk"; + }; + + soc_faxiclk: refclk400mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + clock-output-names = "faxi_clk"; + }; +}; diff --git a/arch/arm/dts/juno-cs-r1r2.dtsi b/arch/arm/dts/juno-cs-r1r2.dtsi new file mode 100644 index 0000000..eda3d9e --- /dev/null +++ b/arch/arm/dts/juno-cs-r1r2.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +/ { + funnel@20130000 { /* cssys1 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x20130000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + csys1_funnel_out_port: endpoint { + remote-endpoint = <&etf1_in_port>; + }; + }; + }; + in-ports { + port { + csys1_funnel_in_port0: endpoint { + }; + }; + + }; + }; + + etf@20140000 { /* etf1 */ + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + in-ports { + port { + etf1_in_port: endpoint { + remote-endpoint = <&csys1_funnel_out_port>; + }; + }; + }; + out-ports { + port { + etf1_out_port: endpoint { + remote-endpoint = <&csys2_funnel_in_port1>; + }; + }; + }; + }; + + funnel@20150000 { /* cssys2 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x20150000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + csys2_funnel_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csys2_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf0_out_port>; + }; + }; + + port@1 { + reg = <1>; + csys2_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etf1_out_port>; + }; + }; + + }; + }; +}; diff --git a/arch/arm/dts/juno-motherboard.dtsi b/arch/arm/dts/juno-motherboard.dtsi new file mode 100644 index 0000000..42b1754 --- /dev/null +++ b/arch/arm/dts/juno-motherboard.dtsi @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * ARM Juno Platform motherboard peripherals + * + * Copyright (c) 2013-2014 ARM Ltd + * + * This file is licensed under a dual GPLv2 or BSD license. + * + */ + +/ { + mb_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "juno_mb:clk24mhz"; + }; + + mb_clk25mhz: clk25mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "juno_mb:clk25mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "juno_mb:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "juno_mb:refclk32khz"; + }; + + mb_fixed_3v3: mcc-sb-3v3 { + compatible = "regulator-fixed"; + regulator-name = "MCC_SB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <116>; + label = "POWER"; + gpios = <&iofpga_gpio0 0 0x4>; + }; + home-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <102>; + label = "HOME"; + gpios = <&iofpga_gpio0 1 0x4>; + }; + rlock-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <152>; + label = "RLOCK"; + gpios = <&iofpga_gpio0 2 0x4>; + }; + vol-up-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <115>; + label = "VOL+"; + gpios = <&iofpga_gpio0 3 0x4>; + }; + vol-down-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <114>; + label = "VOL-"; + gpios = <&iofpga_gpio0 4 0x4>; + }; + nmi-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <99>; + label = "NMI"; + gpios = <&iofpga_gpio0 5 0x4>; + }; + }; + + bus@8000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x8000000 0 0x8000000 0x18000000>; + + motherboard-bus@8000000 { + compatible = "arm,vexpress,v2p-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + arm,hbi = <0x252>; + arm,vexpress,site = <0>; + + flash@0 { + /* 2 * 32MiB NOR Flash memory mounted on CS0 */ + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>; + bank-width = <4>; + /* + * Unfortunately, accessing the flash disturbs + * the CPU idle states (suspend) and CPU + * hotplug of the platform. For this reason, + * flash hardware access is disabled by default. + */ + status = "disabled"; + partitions { + compatible = "arm,arm-firmware-suite"; + }; + }; + + ethernet@200000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <2 0x00000000 0x10000>; + interrupts = <3>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + clocks = <&mb_clk25mhz>; + vdd33a-supply = <&mb_fixed_3v3>; + vddvario-supply = <&mb_fixed_3v3>; + }; + + iofpga-bus@300000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysctl: sysctl@20000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + }; + + apbregs@10000 { + compatible = "syscon", "simple-mfd"; + reg = <0x010000 0x1000>; + + led0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "vexpress:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "vexpress:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "vexpress:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "vexpress:3"; + linux,default-trigger = "cpu1"; + default-state = "off"; + }; + led4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "vexpress:4"; + linux,default-trigger = "cpu2"; + default-state = "off"; + }; + led5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "vexpress:5"; + linux,default-trigger = "cpu3"; + default-state = "off"; + }; + led6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "vexpress:6"; + default-state = "off"; + }; + led7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "vexpress:7"; + default-state = "off"; + }; + }; + + mmc@50000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <5>; + /* cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; */ + max-frequency = <12000000>; + vmmc-supply = <&mb_fixed_3v3>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@60000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@70000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + watchdog@f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x10000>; + interrupts = <7>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x10000>; + interrupts = <9>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x10000>; + interrupts = <9>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x10000>; + interrupts = <0>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + iofpga_gpio0: gpio@1d0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x1d0000 0x1000>; + interrupts = <6>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/juno-r2-u-boot.dtsi b/arch/arm/dts/juno-r2-u-boot.dtsi new file mode 100644 index 0000000..7279066 --- /dev/null +++ b/arch/arm/dts/juno-r2-u-boot.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * ARM Juno Platform additions for U-Boot + */ + +/ { + bus@8000000 { + motherboard-bus@8000000 { + /* + * This should not be marked "disabled" in U-Boot. The + * boot loader is not using some CPU idle states and + * hotplug but may be very interested in accessing the + * flash. + */ + flash@0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/dts/juno-r2.dts b/arch/arm/dts/juno-r2.dts new file mode 100644 index 0000000..52a6517 --- /dev/null +++ b/arch/arm/dts/juno-r2.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2015 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "juno-base.dtsi" +#include "juno-cs-r1r2.dtsi" + +/ { + model = "ARM Juno development board (r2)"; + compatible = "arm,juno-r2", "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + }; + }; + + A72_0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&A72_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <450>; + }; + + A72_1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&A72_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <450>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; + }; + + A72_L2: l2-cache0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + }; + }; + + pmu-a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A72_0>, + <&A72_1>; + }; + + pmu-a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; +}; + +&memtimer { + status = "okay"; +}; + +&pcie_ctlr { + status = "okay"; +}; + +&smmu_pcie { + status = "okay"; +}; + +&etm0 { + cpu = <&A72_0>; +}; + +&etm1 { + cpu = <&A72_1>; +}; + +&etm2 { + cpu = <&A53_0>; +}; + +&etm3 { + cpu = <&A53_1>; +}; + +&etm4 { + cpu = <&A53_2>; +}; + +&etm5 { + cpu = <&A53_3>; +}; + +&big_cluster_thermal_zone { + status = "okay"; +}; + +&little_cluster_thermal_zone { + status = "okay"; +}; + +&gpu0_thermal_zone { + status = "okay"; +}; + +&gpu1_thermal_zone { + status = "okay"; +}; + +&etf0_out_port { + remote-endpoint = <&csys2_funnel_in_port0>; +}; + +&replicator_in_port0 { + remote-endpoint = <&csys2_funnel_out_port>; +}; + +&csys1_funnel_in_port0 { + remote-endpoint = <&stm_out_port>; +}; + +&stm_out_port { + remote-endpoint = <&csys1_funnel_in_port0>; +}; + +&cpu_debug0 { + cpu = <&A72_0>; +}; + +&cpu_debug1 { + cpu = <&A72_1>; +}; + +&cpu_debug2 { + cpu = <&A53_0>; +}; + +&cpu_debug3 { + cpu = <&A53_1>; +}; + +&cpu_debug4 { + cpu = <&A53_2>; +}; + +&cpu_debug5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm/dts/k3-am642-r5-sk.dts b/arch/arm/dts/k3-am642-r5-sk.dts index 79eff82..71fcf61 100644 --- a/arch/arm/dts/k3-am642-r5-sk.dts +++ b/arch/arm/dts/k3-am642-r5-sk.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> #include "k3-am642.dtsi" #include "k3-am64-sk-lp4-1333MTs.dtsi" #include "k3-am64-ddr.dtsi" @@ -107,6 +109,13 @@ AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ >; }; + + main_usb0_pins_default: main-usb0-pins-default { + u-boot,dm-spl; + pinctrl-single,pins = < + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ + >; + }; }; &dmsc { @@ -142,4 +151,35 @@ pinctrl-0 = <&main_mmc1_pins_default>; }; +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_USB>; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes0 { + serdes0_usb_link: link@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 1>; + }; +}; + +&usbss0 { + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "host"; + maximum-speed = "super-speed"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb0_pins_default>; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + #include "k3-am642-sk-u-boot.dtsi" diff --git a/arch/arm/dts/k3-am642-sk-u-boot.dtsi b/arch/arm/dts/k3-am642-sk-u-boot.dtsi index efbcfb3..95cf52c 100644 --- a/arch/arm/dts/k3-am642-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am642-sk-u-boot.dtsi @@ -110,3 +110,36 @@ &cpsw_port2 { status = "disabled"; }; + +&main_usb0_pins_default { + u-boot,dm-spl; +}; + +&serdes_ln_ctrl { + u-boot,mux-autoprobe; +}; + +&usbss0 { + u-boot,dm-spl; +}; + +&usb0 { + dr_mode = "host"; + u-boot,dm-spl; +}; + +&serdes_wiz0 { + u-boot,dm-spl; +}; + +&serdes0_usb_link { + u-boot,dm-spl; +}; + +&serdes0 { + u-boot,dm-spl; +}; + +&serdes_refclk { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi index 69479d7..2705837 100644 --- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi +++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi @@ -18,6 +18,7 @@ blob-ext@0x000000 { offset = <0x000000>; filename = "tiboot3.bin"; + missing-msg = "iot2050-seboot"; }; blob@0x080000 { @@ -153,21 +154,25 @@ blob-ext@0x6c0000 { offset = <0x6c0000>; filename = "sysfw.itb"; + missing-msg = "iot2050-sysfw"; }; /* PG1 sysfw, advanced variant */ blob-ext@0x740000 { offset = <0x740000>; filename = "sysfw.itb_HS"; + missing-msg = "iot2050-sysfw"; }; /* PG2 sysfw, basic variant */ blob-ext@0x7c0000 { offset = <0x7c0000>; filename = "sysfw_sr2.itb"; + missing-msg = "iot2050-sysfw"; }; /* PG2 sysfw, advanced variant */ blob-ext@0x840000 { offset = <0x840000>; filename = "sysfw_sr2.itb_HS"; + missing-msg = "iot2050-sysfw"; }; }; }; diff --git a/arch/arm/dts/ls1021a-tsn.dts b/arch/arm/dts/ls1021a-tsn.dts index 8e0f4ea..68f5543 100644 --- a/arch/arm/dts/ls1021a-tsn.dts +++ b/arch/arm/dts/ls1021a-tsn.dts @@ -14,6 +14,81 @@ enet1-sgmii-phy = &sgmii_phy1; spi0 = &qspi; spi1 = &dspi1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &swp2; + ethernet4 = &swp3; + ethernet5 = &swp4; + ethernet6 = &swp5; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + /* SPI controller settings for SJA1105 timing requirements */ + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + swp5: port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + swp2: port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + swp3: port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + swp4: port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; }; }; @@ -31,6 +106,17 @@ status = "okay"; }; +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + &i2c0 { status = "okay"; }; @@ -46,6 +132,23 @@ reg = <0x2>; }; + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + /* SGMII PCS for enet0 */ tbi0: tbi-phy@1f { reg = <0x1f>; diff --git a/arch/arm/dts/octeontx.dts b/arch/arm/dts/octeontx.dts new file mode 100644 index 0000000..60a15f5 --- /dev/null +++ b/arch/arm/dts/octeontx.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Dummy devicetre file for octeontx2 boards + * + * This is required to make the board build with CONFIG OF_SEPARATE + * I could not find any in-tree documentation at all so this is a dummy file. + * + * Copyright 2021 Google LLC + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/dts/qemu-arm.dts b/arch/arm/dts/qemu-arm.dts new file mode 100644 index 0000000..230c630 --- /dev/null +++ b/arch/arm/dts/qemu-arm.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Empty device tree for qemu_arm + + * Copyright 2021 Google LLC + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/dts/qemu-arm64.dts b/arch/arm/dts/qemu-arm64.dts new file mode 100644 index 0000000..096b391 --- /dev/null +++ b/arch/arm/dts/qemu-arm64.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Empty device tree for qemu_arm64 + + * Copyright 2021 Google LLC + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi index e801331..be44519 100644 --- a/arch/arm/dts/sam9x60.dtsi +++ b/arch/arm/dts/sam9x60.dtsi @@ -22,6 +22,7 @@ serial0 = &dbgu; gpio0 = &pioA; gpio1 = &pioB; + gpio2 = &pioC; gpio3 = &pioD; spi0 = &qspi; }; @@ -197,6 +198,14 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + #gpio-cells = <2>; + gpio-controller; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; + }; + pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; diff --git a/arch/arm/dts/sama7g5-pinfunc.h b/arch/arm/dts/sama7g5-pinfunc.h index b5472fa..38d6962 100644 --- a/arch/arm/dts/sama7g5-pinfunc.h +++ b/arch/arm/dts/sama7g5-pinfunc.h @@ -765,7 +765,7 @@ #define PIN_PD20__PCK0 PINMUX_PIN(PIN_PD20, 1, 3) #define PIN_PD20__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD20, 2, 2) #define PIN_PD20__PWMH3 PINMUX_PIN(PIN_PD20, 3, 4) -#define PIN_PD20__CANTX4 PINMUX_PIN(PIN_PD20, 5, 2) +#define PIN_PD20__CANTX4 PINMUX_PIN(PIN_PD20, 4, 2) #define PIN_PD20__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD20, 6, 5) #define PIN_PD21 117 #define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0) diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi index b951aff..4a3c675 100644 --- a/arch/arm/dts/sama7g5.dtsi +++ b/arch/arm/dts/sama7g5.dtsi @@ -91,6 +91,32 @@ #clock-cells = <1>; }; + qspi0: spi@e080c000 { + compatible = "microchip,sama7g5-ospi"; + reg = <0xe080c000 0x400>, <0x20000000 0x10000000>; + reg-names = "qspi_base", "qspi_mmap"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 78>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + qspi1: spi@e0810000 { + compatible = "microchip,sama7g5-qspi"; + reg = <0xe0810000 0x400>, <0x30000000 0x10000000>; + reg-names = "qspi_base", "qspi_mmap"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 78>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* sys pll div. */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sdmmc0: sdio-host@e1204000 { compatible = "microchip,sama7g5-sdhci"; reg = <0xe1204000 0x300>; diff --git a/arch/arm/dts/sama7g5ek.dts b/arch/arm/dts/sama7g5ek.dts index 1c59a8a..16192ca 100644 --- a/arch/arm/dts/sama7g5ek.dts +++ b/arch/arm/dts/sama7g5ek.dts @@ -11,6 +11,7 @@ #include <dt-bindings/mfd/atmel-flexcom.h> #include "sama7g5.dtsi" #include "sama7g5-pinfunc.h" +#include <dt-bindings/pinctrl/at91.h> / { model = "Microchip SAMA7G5 Evaluation Kit"; @@ -64,6 +65,24 @@ }; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <133000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + m25p,fast-read; + + }; +}; + &flx1 { atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; @@ -126,6 +145,25 @@ bias-pull-up; }; + pinctrl_qspi: qspi { + pinmux = <PIN_PB12__QSPI0_IO0>, + <PIN_PB11__QSPI0_IO1>, + <PIN_PB10__QSPI0_IO2>, + <PIN_PB9__QSPI0_IO3>, + <PIN_PB16__QSPI0_IO4>, + <PIN_PB17__QSPI0_IO5>, + <PIN_PB18__QSPI0_IO6>, + <PIN_PB19__QSPI0_IO7>, + <PIN_PB13__QSPI0_CS>, + <PIN_PB14__QSPI0_SCK>, + <PIN_PB15__QSPI0_SCKN>, + <PIN_PB20__QSPI0_DQS>, + <PIN_PB21__QSPI0_INT>; + bias-disable; + slew-rate = <0>; + atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>; + }; + pinctrl_sdmmc0_cmd_data_default: sdmmc0_cmd_data_default { pinmux = <PIN_PA1__SDMMC0_CMD>, <PIN_PA3__SDMMC0_DAT0>, diff --git a/arch/arm/dts/stm32429i-eval-u-boot.dtsi b/arch/arm/dts/stm32429i-eval-u-boot.dtsi index 09d9d9a..fcab9ae 100644 --- a/arch/arm/dts/stm32429i-eval-u-boot.dtsi +++ b/arch/arm/dts/stm32429i-eval-u-boot.dtsi @@ -33,7 +33,7 @@ fmc: fmc@A0000000 { compatible = "st,stm32-fmc"; - reg = <0xA0000000 0x1000>; + reg = <0xa0000000 0x1000>; clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>; st,syscfg = <&syscfg>; pinctrl-0 = <&fmc_pins_d32>; diff --git a/arch/arm/dts/stm32746g-eval-u-boot.dtsi b/arch/arm/dts/stm32746g-eval-u-boot.dtsi index f2195a6..8550ef7 100644 --- a/arch/arm/dts/stm32746g-eval-u-boot.dtsi +++ b/arch/arm/dts/stm32746g-eval-u-boot.dtsi @@ -177,7 +177,7 @@ }; &qspi { - reg = <0xA0001000 0x1000>, <0x90000000 0x4000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x4000000>; qflash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/stm32f429-disco-u-boot.dtsi b/arch/arm/dts/stm32f429-disco-u-boot.dtsi index 297cc56..c993f86 100644 --- a/arch/arm/dts/stm32f429-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f429-disco-u-boot.dtsi @@ -33,7 +33,7 @@ fmc: fmc@A0000000 { compatible = "st,stm32-fmc"; - reg = <0xA0000000 0x1000>; + reg = <0xa0000000 0x1000>; clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>; pinctrl-0 = <&fmc_pins>; pinctrl-names = "default"; diff --git a/arch/arm/dts/stm32f469-disco-u-boot.dtsi b/arch/arm/dts/stm32f469-disco-u-boot.dtsi index 9eda8f5..cd17362 100644 --- a/arch/arm/dts/stm32f469-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f469-disco-u-boot.dtsi @@ -34,7 +34,7 @@ fmc: fmc@A0000000 { compatible = "st,stm32-fmc"; - reg = <0xA0000000 0x1000>; + reg = <0xa0000000 0x1000>; clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>; st,syscfg = <&syscfg>; pinctrl-0 = <&fmc_pins_d32>; @@ -70,7 +70,7 @@ compatible = "st,stm32f469-qspi"; #address-cells = <1>; #size-cells = <0>; - reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <91>; spi-max-frequency = <108000000>; @@ -236,7 +236,7 @@ }; &qspi { - reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x1000000>; flash0: n25q128a@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/stm32f7-u-boot.dtsi b/arch/arm/dts/stm32f7-u-boot.dtsi index 46bd110..c1b2ac2 100644 --- a/arch/arm/dts/stm32f7-u-boot.dtsi +++ b/arch/arm/dts/stm32f7-u-boot.dtsi @@ -7,7 +7,7 @@ fmc: fmc@A0000000 { compatible = "st,stm32-fmc"; - reg = <0xA0000000 0x1000>; + reg = <0xa0000000 0x1000>; clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>; pinctrl-0 = <&fmc_pins>; pinctrl-names = "default"; @@ -46,7 +46,7 @@ compatible = "st,stm32f469-qspi"; #address-cells = <1>; #size-cells = <0>; - reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <92>; spi-max-frequency = <108000000>; diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi index 4f34fc9..f88466f 100644 --- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi @@ -228,7 +228,7 @@ }; &qspi { - reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x1000000>; qflash0: n25q128a@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/arch/arm/dts/stm32f769-disco-u-boot.dtsi index 7dfe430..5589b41 100644 --- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi @@ -53,9 +53,9 @@ soc { dsi: dsi@40016c00 { compatible = "st,stm32-dsi"; - reg = <0x40016C00 0x800>; + reg = <0x40016c00 0x800>; resets = <&rcc STM32F7_APB2_RESET(DSI)>; - clocks = <&rcc 0 STM32F7_APB2_CLOCK(DSI)>, + clocks = <&rcc 0 STM32F7_APB2_CLOCK(DSI)>, <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>, <&clk_hse>; clock-names = "pclk", "px_clk", "ref"; @@ -227,7 +227,7 @@ }; &qspi { - reg = <0xA0001000 0x1000>, <0x90000000 0x4000000>; + reg = <0xa0001000 0x1000>, <0x90000000 0x4000000>; flash0: mx66l51235l@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi index 2a139c5..0aac913 100644 --- a/arch/arm/dts/stm32mp15-ddr.dtsi +++ b/arch/arm/dts/stm32mp15-ddr.dtsi @@ -116,24 +116,6 @@ DDR_MR3 >; -#ifdef DDR_PHY_CAL_SKIP - st,phy-cal = < - DDR_DX0DLLCR - DDR_DX0DQTR - DDR_DX0DQSTR - DDR_DX1DLLCR - DDR_DX1DQTR - DDR_DX1DQSTR - DDR_DX2DLLCR - DDR_DX2DQTR - DDR_DX2DQSTR - DDR_DX3DLLCR - DDR_DX3DQTR - DDR_DX3DQSTR - >; - -#endif - status = "okay"; }; }; @@ -224,18 +206,6 @@ #undef DDR_ODTCR #undef DDR_ZQ0CR1 #undef DDR_DX0GCR -#undef DDR_DX0DLLCR -#undef DDR_DX0DQTR -#undef DDR_DX0DQSTR #undef DDR_DX1GCR -#undef DDR_DX1DLLCR -#undef DDR_DX1DQTR -#undef DDR_DX1DQSTR #undef DDR_DX2GCR -#undef DDR_DX2DLLCR -#undef DDR_DX2DQTR -#undef DDR_DX2DQSTR #undef DDR_DX3GCR -#undef DDR_DX3DLLCR -#undef DDR_DX3DQTR -#undef DDR_DX3DQSTR diff --git a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi index 978331b..e60d0ae 100644 --- a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE80 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE80 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi index 426be21..1a6fa80 100644 --- a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi index b3eb280..0a277cd 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi index ed3a524..92774ff 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi index d5813d6..e53ab18 100644 --- a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi @@ -101,20 +101,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi index 24c8126..ff582ac 100644 --- a/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi @@ -100,20 +100,8 @@ #define DDR_ODTCR 0x00010000 #define DDR_ZQ0CR1 0x00000038 #define DDR_DX0GCR 0x0000CE81 -#define DDR_DX0DLLCR 0x40000000 -#define DDR_DX0DQTR 0xFFFFFFFF -#define DDR_DX0DQSTR 0x3DB02000 #define DDR_DX1GCR 0x0000CE81 -#define DDR_DX1DLLCR 0x40000000 -#define DDR_DX1DQTR 0xFFFFFFFF -#define DDR_DX1DQSTR 0x3DB02000 #define DDR_DX2GCR 0x0000CE81 -#define DDR_DX2DLLCR 0x40000000 -#define DDR_DX2DQTR 0xFFFFFFFF -#define DDR_DX2DQSTR 0x3DB02000 #define DDR_DX3GCR 0x0000CE81 -#define DDR_DX3DLLCR 0x40000000 -#define DDR_DX3DQTR 0xFFFFFFFF -#define DDR_DX3DQSTR 0x3DB02000 #include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index db23d80..e23d6c7 100644 --- a/arch/arm/dts/stm32mp15-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi @@ -50,8 +50,8 @@ compatible = "st,stm32mp1-ddr"; - reg = <0x5A003000 0x550 - 0x5A004000 0x234>; + reg = <0x5a003000 0x550 + 0x5a004000 0x234>; clocks = <&rcc AXIDCG>, <&rcc DDRC1>, @@ -237,7 +237,7 @@ u-boot-stm32 { filename = "u-boot.stm32"; mkimage { - args = "-T stm32image -a 0xC0100000 -e 0xC0100000"; + args = "-T stm32image -a 0xc0100000 -e 0xc0100000"; u-boot { }; }; @@ -250,7 +250,7 @@ spl-stm32 { filename = "u-boot-spl.stm32"; mkimage { - args = "-T stm32image -a 0x2FFC2500 -e 0x2FFC2500"; + args = "-T stm32image -a 0x2ffc2500 -e 0x2ffc2500"; u-boot-spl { }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 71b0486..5b2b09b 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -216,6 +216,10 @@ &sdmmc1 { u-boot,dm-spl; + st,use-ckin; + st,cmd-gpios = <&gpiod 2 0>; + st,ck-gpios = <&gpioc 12 0>; + st,ckin-gpios = <&gpioe 4 0>; }; &sdmmc1_b4_pins_a { diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi index 4b1dbf0..c96eba9 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi @@ -32,6 +32,10 @@ &sdmmc1 { u-boot,dm-spl; + st,use-ckin; + st,cmd-gpios = <&gpiod 2 0>; + st,ck-gpios = <&gpioc 12 0>; + st,ckin-gpios = <&gpioe 4 0>; }; &sdmmc1_b4_pins_a { diff --git a/arch/arm/dts/xenguest-arm64.dts b/arch/arm/dts/xenguest-arm64.dts new file mode 100644 index 0000000..d873443 --- /dev/null +++ b/arch/arm/dts/xenguest-arm64.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Empty devicetree file for xenguest_arm64 + * + * This is required to make the board build with CONFIG OF_SEPARATE + * Build instructions at xenguest_arm64.rst are inadequate for obtaining a real + * devicetree. + * + * Copyright 2021 Google LLC + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/dts/xilinx-versal-virt.dts b/arch/arm/dts/xilinx-versal-virt.dts new file mode 100644 index 0000000..733e532 --- /dev/null +++ b/arch/arm/dts/xilinx-versal-virt.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Empty device tree for versal-virt board + * + * Copyright 2021 Google LLC + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/include/asm/arch-aspeed/platform.h b/arch/arm/include/asm/arch-aspeed/platform.h index d50ec5f..589abd4 100644 --- a/arch/arm/include/asm/arch-aspeed/platform.h +++ b/arch/arm/include/asm/arch-aspeed/platform.h @@ -17,7 +17,7 @@ #define ASPEED_MAC_COUNT 4 #define ASPEED_DRAM_BASE 0x80000000 #define ASPEED_SRAM_BASE 0x10000000 -#define ASPEED_SRAM_SIZE 0x10000 +#define ASPEED_SRAM_SIZE 0x16000 #else #err "Unrecognized Aspeed platform." #endif diff --git a/arch/arm/include/asm/arch-aspeed/scu_ast2600.h b/arch/arm/include/asm/arch-aspeed/scu_ast2600.h index a205fb1..7c5aab9 100644 --- a/arch/arm/include/asm/arch-aspeed/scu_ast2600.h +++ b/arch/arm/include/asm/arch-aspeed/scu_ast2600.h @@ -8,10 +8,12 @@ #define SCU_UNLOCK_KEY 0x1688a8a8 #define SCU_CLKGATE1_EMMC BIT(27) +#define SCU_CLKGATE1_ACRY BIT(24) #define SCU_CLKGATE1_MAC2 BIT(21) #define SCU_CLKGATE1_MAC1 BIT(20) -#define SCU_CLKGATE1_USB_HUB BIT(14) -#define SCU_CLKGATE1_USB_HOST2 BIT(7) +#define SCU_CLKGATE1_USB_HUB BIT(14) +#define SCU_CLKGATE1_HACE BIT(13) +#define SCU_CLKGATE1_USB_HOST2 BIT(7) #define SCU_CLKGATE2_FSI BIT(30) #define SCU_CLKGATE2_MAC4 BIT(21) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 733373e..1315beb 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -234,7 +234,6 @@ #elif defined(CONFIG_ARCH_LS1028A) #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 } -#define CONFIG_FSL_TZPC_BP147 #define CONFIG_FSL_TZASC_400 /* TZ Protection Controller Definitions */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index c9be076..06adf66 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -11,7 +11,6 @@ #include <linux/bitops.h> #endif -#define CONFIG_SYS_IMMR 0x01000000 #define CONFIG_SYS_DCSRBAR 0x20000000 #define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00140000) #define CONFIG_SYS_DCSR_COP_CCP_ADDR (CONFIG_SYS_DCSRBAR + 0x02008040) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index b64d7fb..863618a 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -9,7 +9,6 @@ #ifndef __ARCH_FSL_LSCH3_IMMAP_H_ #define __ARCH_FSL_LSCH3_IMMAP_H_ -#define CONFIG_SYS_IMMR 0x01000000 #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) #define CONFIG_SYS_FSL_DDR2_ADDR (CONFIG_SYS_IMMR + 0x00090000) #define CONFIG_SYS_FSL_DDR3_ADDR 0x08210000 diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 3884948..0e1f9e0 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -11,7 +11,6 @@ #define OCRAM_BASE_S_ADDR 0x10010000 #define OCRAM_S_SIZE 0x00010000 -#define CONFIG_SYS_IMMR 0x01000000 #define CONFIG_SYS_DCSRBAR 0x20000000 #define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00220000) diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 956d258..ba31290 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -109,6 +109,10 @@ ENTRY(_main) mov r9, r0 bl board_init_f_init_reserve +#if defined(CONFIG_DEBUG_UART) && CONFIG_IS_ENABLED(SERIAL) + bl debug_uart_init +#endif + #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_EARLY_BSS) CLEAR_BSS #endif diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index 28c8356..84c04bd 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -91,6 +91,10 @@ ENTRY(_main) mov x18, x0 bl board_init_f_init_reserve +#if defined(CONFIG_DEBUG_UART) && CONFIG_IS_ENABLED(SERIAL) + bl debug_uart_init +#endif + mov x0, #0 bl board_init_f diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig index 66cab91..80e8eb2 100644 --- a/arch/arm/mach-apple/Kconfig +++ b/arch/arm/mach-apple/Kconfig @@ -15,4 +15,7 @@ config SYS_MALLOC_LEN config SYS_MALLOC_F_LEN default 0x4000 +config LNX_KRNL_IMG_TEXT_OFFSET_BASE + default SYS_TEXT_BASE + endif diff --git a/arch/arm/mach-aspeed/ast2600/spl.c b/arch/arm/mach-aspeed/ast2600/spl.c index 0d8cb29..6c49d6a 100644 --- a/arch/arm/mach-aspeed/ast2600/spl.c +++ b/arch/arm/mach-aspeed/ast2600/spl.c @@ -28,14 +28,7 @@ u32 spl_boot_device(void) struct image_header *spl_get_load_buffer(ssize_t offset, size_t size) { - /* - * When boot from SPI, AST2600 already remap 0x00000000 ~ 0x0fffffff - * to BMC SPI memory space 0x20000000 ~ 0x2fffffff. The next stage BL - * has been located in SPI for XIP. In this case, the load buffer for - * SPL image loading will be set to the remapped address of the next - * BL instead of the DRAM space CONFIG_SYS_LOAD_ADDR - */ - return (struct image_header *)(CONFIG_SYS_TEXT_BASE); + return (struct image_header *)(CONFIG_SYS_LOAD_ADDR); } #ifdef CONFIG_SPL_OS_BOOT diff --git a/arch/arm/mach-at91/arm926ejs/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile index 8de6a2f..c1904d5 100644 --- a/arch/arm/mach-at91/arm926ejs/Makefile +++ b/arch/arm/mach-at91/arm926ejs/Makefile @@ -20,8 +20,11 @@ obj-$(CONFIG_AT91_LED) += led.o obj-y += clock.o obj-y += cpu.o obj-y += reset.o -ifeq ($(CONFIG_ATMEL_PIT_TIMER),) -obj-y += timer.o +ifneq ($(CONFIG_ATMEL_PIT_TIMER),y) +ifneq ($(CONFIG_MCHP_PIT64B_TIMER),y) +# old non-DM timer driver +obj-y += timer.o +endif endif ifndef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig index b3287ce..6ce278c 100644 --- a/arch/arm/mach-bcm283x/Kconfig +++ b/arch/arm/mach-bcm283x/Kconfig @@ -163,6 +163,7 @@ config TARGET_RPI_4_32B This option creates a build targeting the ARMv7/AArch32 ISA. select BCM2711_32B + imply OF_HAS_PRIOR_STAGE config TARGET_RPI_4 bool "Raspberry Pi 4 64-bit build" @@ -188,6 +189,7 @@ config TARGET_RPI_4 This option creates a build targeting the ARMv8/AArch64 ISA. select BCM2711_64B + imply OF_HAS_PRIOR_STAGE config TARGET_RPI_ARM64 bool "Raspberry Pi one binary 64-bit build" @@ -195,6 +197,7 @@ config TARGET_RPI_ARM64 Support for all armv8 based Raspberry Pi variants, such as the RPi 4 model B, in AArch64 (64-bit) mode. select ARM64 + imply OF_HAS_PRIOR_STAGE endchoice diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c index aefd21d..0f68f9f 100644 --- a/arch/arm/mach-davinci/cpu.c +++ b/arch/arm/mach-davinci/cpu.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <init.h> #include <asm/arch/hardware.h> #include <asm/global_data.h> @@ -91,3 +92,8 @@ int set_cpu_clk_info(void) gd->bd->bi_dsp_freq = 0; return 0; } + +unsigned long get_board_sys_clk(void) +{ + return clk_get(DAVINCI_ARM_CLKID); +} diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 7f3aee5..10301c1 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -23,6 +23,7 @@ config ARCH_EXYNOS5 imply CMD_HASH imply CRC32_VERIFY imply HASH_VERIFY + imply KEYBOARD imply USB_ETHER_ASIX imply USB_ETHER_RTL8152 imply USB_ETHER_SMSC95XX diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index ef48d35..99bca54 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <log.h> #include <asm/io.h> #include <asm/arch/clock.h> @@ -136,7 +137,7 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) /* SDIV [2:0] */ s = r & 0x7; - freq = CONFIG_SYS_CLK_FREQ; + freq = get_board_sys_clk(); if (pllreg == EPLL || pllreg == RPLL) { k = k & 0xffff; @@ -1051,7 +1052,7 @@ static unsigned long exynos5800_get_lcd_clk(void) RPLL}; sclk = get_pll_clk(reg_map[sel]); } else - sclk = CONFIG_SYS_CLK_FREQ; + sclk = get_board_sys_clk(); /* * CLK_DIV_DISP10 * FIMD1_RATIO [3:0] diff --git a/arch/arm/mach-imx/imxrt/Kconfig b/arch/arm/mach-imx/imxrt/Kconfig index d275fdf..8c89133 100644 --- a/arch/arm/mach-imx/imxrt/Kconfig +++ b/arch/arm/mach-imx/imxrt/Kconfig @@ -2,6 +2,7 @@ if ARCH_IMXRT config IMXRT bool + select SYS_FSL_ERRATUM_ESDHC135 config IMXRT1020 bool diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index cb4e9f2..c060cc8 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -1,66 +1,115 @@ if ARCH_KIRKWOOD +config FEROCEON_88FR131 + bool + +config KW88F6192 + bool + +config KW88F6281 + bool + +config SHEEVA_88SV131 + bool + choice prompt "Marvell Kirkwood board select" optional config TARGET_OPENRD bool "Marvell OpenRD Board" + select KW88F6281 + select SHEEVA_88SV131 config TARGET_DREAMPLUG bool "DreamPlug Board" + select KW88F6281 + select SHEEVA_88SV131 config TARGET_DS109 bool "Synology DS109" + select KW88F6281 + select SHEEVA_88SV131 config TARGET_GURUPLUG bool "GuruPlug Board" + select KW88F6281 + select SHEEVA_88SV131 config TARGET_SHEEVAPLUG bool "SheevaPlug Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_LSXL bool "lsxl Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_POGO_E02 bool "pogo_e02 Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_DNS325 bool "dns325 Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_ICONNECT bool "iconnect Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_KM_KIRKWOOD bool "KM Kirkwood Board" + select FEROCEON_88FR131 + select KW88F6281 select VENDOR_KM config TARGET_NET2BIG_V2 bool "LaCie 2Big Network v2 NAS Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_NETSPACE_V2 bool "LaCie netspace_v2 Board" + select FEROCEON_88FR131 config TARGET_IB62X0 bool "ib62x0 Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_DOCKSTAR bool "Dockstar Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_GOFLEXHOME bool "GoFlex Home Board" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_NAS220 bool "BlackArmor NAS220" + select FEROCEON_88FR131 + select KW88F6192 config TARGET_NSA310S bool "Zyxel NSA310S" + select FEROCEON_88FR131 + select KW88F6192 config TARGET_SBx81LIFKW bool "Allied Telesis SBx81GS24/SBx81GT40/SBx81XS6/SBx81XS16" + select FEROCEON_88FR131 + select KW88F6281 config TARGET_SBx81LIFXCAT bool "Allied Telesis SBx81GP24/SBx81GT24" + select FEROCEON_88FR131 + select KW88F6281 endchoice diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index cf6b1b9..eb95023 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -27,15 +27,6 @@ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ -/* - * By default kwbimage.cfg from board specific folder is used - * If for some board, different configuration file need to be used, - * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file - */ -#ifndef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg -#endif /* CONFIG_SYS_KWD_CONFIG */ - /* Kirkwood has 2k of Security SRAM, use it for SP */ #define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 @@ -67,8 +58,6 @@ */ #ifdef CONFIG_IDE #define __io -/* Needs byte-swapping for ATA data register */ -#define CONFIG_IDE_SWAP_IO /* Data, registers and alternate blocks are at the same offset */ #define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) #define CONFIG_SYS_ATA_REG_OFFSET (0x0100) diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index 6ecd394..681f649 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -27,15 +27,6 @@ #define CONFIG_SYS_L2_PL310 -/* - * By default the generated mvebu kwbimage.cfg is used - * If for some board, different configuration file need to be used, - * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file - */ -#ifndef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG arch/arm/mach-mvebu/kwbimage.cfg -#endif /* CONFIG_SYS_KWD_CONFIG */ - /* end of 16M scrubbed by training in bootrom */ #define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000 diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c index d2bc3ab..9ba60b5 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c @@ -459,18 +459,41 @@ struct op_params usb3_electrical_config_serdes_rev1_params[] = { }; struct op_params usb3_electrical_config_serdes_rev2_params[] = { - /* Spread Spectrum Clock Enable */ - {LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0}, + /* Spread Spectrum Clock Enable, CFG_DFE_OVERRIDE and PIN_DFE_PAT_DIS */ + {LANE_CFG4_REG, 0x800, 0xc2, {0xc0}, 0, 0}, + /* CFG_SQ_DET_SEL and CFG_RX_INIT_SEL */ + {LANE_CFG5_REG, 0x800, 0x3, {0x3}, 0, 0}, /* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */ {G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0}, - /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */ + /* FFE Setting Force, FFE_RES[2:0]=0x6 and FFE_CAP[3:0]=0xf */ + {G2_SETTINGS_3_REG, 0x800, 0xff, {0xef}, 0, 0}, + /* G2_DFE_RES[1:0]=0x0(3mV)*/ + {G2_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0}, + /* HPF_Bw[1:0]=0x3 */ + {PLLINTP_REG1, 0x800, 0x300, {0x300}, 0, 0}, + /* TXIMPCAL_TH[3:0]=0x3, RXIMPCAL_TH[3:0]=0x0 */ + {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0}, + /* CFG_SQ_DET_SEL and CFG_RX_INIT_SEL*/ + {LANE_CFG5_REG, 0x800, 0x3, {0x3}, 0, 0}, + /* REFCLK_SEL(25Mhz), ICP_FORCE, ICP[3:0]=0xa(210uA); */ + {MISC_REG, 0x800, 0x42f, {0x42a}, 0, 0}, + /* REF_FREF_SEL[4:0]=0x2(25Mhz) */ + {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x02}, 0, 0}, + /* + * G2_RX SELMUFF[1:0]=3, G2_RX_SELMUFI[1:0]=3, G2_RX_SELMUPF[2:0]=2 + * and G2_RX_SELMUPI[2:0]=2 + */ {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0}, /* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */ {RX_REG2, 0x800, 0xf0, {0x70}, 0, 0}, + /* tx_amp_pipe_v0[4:0]=0x1a */ + {PCIE_REG1, 0x800, 0xf80, {0xd00}, 0, 0}, /* vco_cal_vth_sel */ {REF_REG0, 0x800, 0x38, {0x20}, 0, 0}, - /* Spread Spectrum Clock Enable */ - {LANE_CFG5_REG, 0x800, 0x4, {0x4}, 0, 0}, + /* PRD_TXDEEMPH0 */ + {LANE_CFG0_REG, 0x800, 0x1, {0x1}, 0, 0}, + /* MODE_MARGIN_OVERRIDE */ + {GLOBAL_TEST_CTRL, 0x800, 0x4, {0x4}, 0, 0}, }; /* PEX and USB3 - TX config seq */ @@ -490,11 +513,11 @@ struct op_params pex_and_usb3_tx_config_params1[] = { /* 10ms delay */ {0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0}, /* os_ph_offset_force (align 90) */ - {RX_REG3, 0x800, 0xff, {0xdc, NO_DATA}, 0, 0}, + {RX_REG3, 0x800, 0xff, {0xdc, 0xd8}, 0, 0}, /* Set os_ph_valid */ - {RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0}, + {RX_REG3, 0x800, 0x100, {0x100, 0x100}, 0, 0}, /* Unset os_ph_valid */ - {RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0}, + {RX_REG3, 0x800, 0x100, {0x0, 0x0}, 0, 0}, }; struct op_params pex_and_usb3_tx_config_params2[] = { @@ -1204,7 +1227,7 @@ int hws_serdes_seq_db_init(void) sizeof(usb3_electrical_config_serdes_rev2_params) / sizeof(struct op_params); } - serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].data_arr_idx = USB3; + serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].data_arr_idx = 0; /* USB3_TX_CONFIG_SEQ sequence init */ serdes_seq_db[USB3_TX_CONFIG_SEQ1].op_params_ptr = diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h index 118bf56..94c43b4 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h @@ -50,6 +50,7 @@ #define MISC_REG 0xa013c #define GLUE_REG 0xa0140 #define GENERATION_DIVIDER_FORCE_REG 0xa0144 +#define PLLINTP_REG1 0xa0150 #define PCIE_REG0 0xa0120 #define LANE_ALIGN_REG0 0xa0124 #define SQUELCH_FFE_SETTING_REG 0xa0018 @@ -78,6 +79,7 @@ #define LANE_CFG4_REG 0xa0620 #define LANE_CFG5_REG 0xa0624 #define GLOBAL_CLK_CTRL 0xa0704 +#define GLOBAL_TEST_CTRL 0xa0708 #define GLOBAL_MISC_CTRL 0xa0718 #define GLOBAL_CLK_SRC_HI 0xa0710 diff --git a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c index ea3b4c7..0b63664 100644 --- a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c @@ -77,6 +77,7 @@ static u32 board_id_get(void) __weak u8 board_sat_r_get(u8 dev_num, u8 reg) { + struct udevice *udev; u8 data; u8 *dev; u32 board_id = board_id_get(); @@ -107,8 +108,11 @@ __weak u8 board_sat_r_get(u8 dev_num, u8 reg) } /* Read MPP module ID */ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - ret = i2c_read(dev[dev_num], 0, 1, (u8 *)&data, 1); + ret = i2c_get_chip_for_busnum(0, dev[dev_num], 1, &udev); + if (ret) + return MV_ERROR; + + ret = dm_i2c_read(udev, 0, &data, 1); if (ret) return MV_ERROR; @@ -124,13 +128,18 @@ static int board_modules_scan(void) /* Perform scan only for DB board */ if ((board_id == DB_88F78XX0_BP_ID) || (board_id == DB_88F78XX0_BP_REV2_ID)) { + struct udevice *udev; + /* reset modules flags */ config_module = 0; - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + ret = i2c_get_chip_for_busnum(0, MV_BOARD_PEX_MODULE_ADDR, + 1, &udev); + if (ret) + return MV_ERROR; /* SERDES module (only PEX model is supported now) */ - ret = i2c_read(MV_BOARD_PEX_MODULE_ADDR, 0, 1, (u8 *)&val, 1); + ret = dm_i2c_read(udev, 0, &val, 1); if (ret) return MV_ERROR; diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index 73c4b9a..aada83f 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -5,7 +5,6 @@ #include <common.h> #include <dm.h> -#include <debug_uart.h> #include <fdtdec.h> #include <hang.h> #include <image.h> @@ -250,18 +249,6 @@ void board_init_f(ulong dummy) */ board_early_init_f(); - /* Example code showing how to enable the debug UART on MVEBU */ -#ifdef EARLY_UART - /* - * Debug UART can be used from here if required: - * - * debug_uart_init(); - * printch('a'); - * printhex8(0x1234); - * printascii("string"); - */ -#endif - /* * Use special translation offset for SPL. This needs to be * configured *before* spl_init() is called as this function @@ -273,7 +260,7 @@ void board_init_f(ulong dummy) ret = spl_init(); if (ret) { - debug("spl_init() failed: %d\n", ret); + printf("spl_init() failed: %d\n", ret); hang(); } @@ -289,7 +276,7 @@ void board_init_f(ulong dummy) /* Setup DDR */ ret = ddr3_init(); if (ret) { - debug("ddr3_init() failed: %d\n", ret); + printf("ddr3_init() failed: %d\n", ret); hang(); } #endif diff --git a/arch/arm/mach-nexell/Kconfig b/arch/arm/mach-nexell/Kconfig index ffa4d48..86a2398 100644 --- a/arch/arm/mach-nexell/Kconfig +++ b/arch/arm/mach-nexell/Kconfig @@ -33,6 +33,12 @@ config TARGET_NANOPI2 endchoice +config SYS_PLLFIN + int + +config TIMER_SYS_TICK_CH + int + config SYS_BOARD default "nanopi2" @@ -45,13 +51,13 @@ config SYS_SOC config SYS_CONFIG_NAME default "s5p4418_nanopi2" -endmenu - config SYS_PLLFIN - int + default 24000000 config TIMER_SYS_TICK_CH - int + default 0 + +endmenu source "board/friendlyarm/Kconfig" diff --git a/arch/arm/mach-octeontx/Kconfig b/arch/arm/mach-octeontx/Kconfig index 28ecf98..542f480 100644 --- a/arch/arm/mach-octeontx/Kconfig +++ b/arch/arm/mach-octeontx/Kconfig @@ -16,8 +16,4 @@ config SYS_SOC string default "octeontx" -config SYS_PCI_64BIT - bool - default y - endif diff --git a/arch/arm/mach-octeontx2/Kconfig b/arch/arm/mach-octeontx2/Kconfig index 8e5cb0f..f6158df 100644 --- a/arch/arm/mach-octeontx2/Kconfig +++ b/arch/arm/mach-octeontx2/Kconfig @@ -16,8 +16,4 @@ config SYS_SOC string default "octeontx2" -config SYS_PCI_64BIT - bool - default y - endif diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 5baa6fb..b8b45a0 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -1,11 +1,19 @@ if ARCH_ORION5X +config 88F5182 + bool + +config FEROCEON + bool + choice prompt "Marvell Orion board select" optional config TARGET_EDMINIV2 bool "LaCie Ethernet Disk mini V2" + select 88F5182 + select FEROCEON select SUPPORT_SPL endchoice diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index d840c59..92f3530 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -8,7 +8,6 @@ config ROCKCHIP_PX30 select SPL select TPL select TPL_TINY_FRAMEWORK if TPL - select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL select TPL_NEEDS_SEPARATE_STACK if TPL imply SPL_SEPARATE_BSS select SPL_SERIAL @@ -80,7 +79,6 @@ config ROCKCHIP_RK322X select TPL select TPL_DM select TPL_OF_LIBFDT - select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL select TPL_NEEDS_SEPARATE_STACK if TPL select SPL_DRIVERS_MISC imply ROCKCHIP_COMMON_BOARD @@ -112,7 +110,6 @@ config ROCKCHIP_RK3288 imply TPL_DRIVERS_MISC imply TPL_LIBCOMMON_SUPPORT imply TPL_LIBGENERIC_SUPPORT - imply TPL_NEEDS_SEPARATE_TEXT_BASE imply TPL_NEEDS_SEPARATE_STACK imply TPL_OF_CONTROL imply TPL_OF_PLATDATA @@ -160,7 +157,6 @@ config ROCKCHIP_RK3328 select SPL select SUPPORT_TPL select TPL - select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL select TPL_NEEDS_SEPARATE_STACK if TPL imply ROCKCHIP_COMMON_BOARD imply ROCKCHIP_SDRAM_COMMON @@ -183,7 +179,6 @@ config ROCKCHIP_RK3368 select ARM64 select SUPPORT_SPL select SUPPORT_TPL - select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL select TPL_NEEDS_SEPARATE_STACK if TPL imply ROCKCHIP_COMMON_BOARD imply SPL_ROCKCHIP_COMMON_BOARD @@ -216,7 +211,6 @@ config ROCKCHIP_RK3399 select SPL_RAM if SPL select SPL_REGMAP if SPL select SPL_SYSCON if SPL - select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL select TPL_NEEDS_SEPARATE_STACK if TPL select SPL_SEPARATE_BSS select SPL_SERIAL diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 2bc8e60..d40969c 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -118,10 +118,6 @@ void board_debug_uart_init(void) #define GPIO0_BASE 0xff720000 #define PMUGRF_BASE 0xff320000 struct rk3399_grf_regs * const grf = (void *)GRF_BASE; -#ifdef CONFIG_TARGET_CHROMEBOOK_BOB - struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE; - struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE; -#endif #if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) /* Enable early UART0 on the RK3399 */ @@ -140,19 +136,25 @@ void board_debug_uart_init(void) GRF_GPIO3B7_SEL_MASK, GRF_UART3_SOUT << GRF_GPIO3B7_SEL_SHIFT); #else -# ifdef CONFIG_TARGET_CHROMEBOOK_BOB - rk_setreg(&grf->io_vsel, 1 << 0); - - /* - * Let's enable these power rails here, we are already running the SPI - * Flash based code. - */ - spl_gpio_output(gpio, GPIO(BANK_B, 2), 1); /* PP1500_EN */ - spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL); + struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE; + struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE; - spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); /* PP3000_EN */ - spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL); -#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */ + if (IS_ENABLED(CONFIG_SPL_BUILD) && + IS_ENABLED(CONFIG_TARGET_CHROMEBOOK_BOB)) { + rk_setreg(&grf->io_vsel, 1 << 0); + + /* + * Let's enable these power rails here, we are already running + * the SPI-Flash-based code. + */ + spl_gpio_output(gpio, GPIO(BANK_B, 2), 1); /* PP1500_EN */ + spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), + GPIO_PULL_NORMAL); + + spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); /* PP3000_EN */ + spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), + GPIO_PULL_NORMAL); + } /* Enable early UART2 channel C on the RK3399 */ rk_clrsetreg(&grf->gpio4c_iomux, diff --git a/arch/arm/mach-s5pc1xx/clock.c b/arch/arm/mach-s5pc1xx/clock.c index 555228a..c90c341 100644 --- a/arch/arm/mach-s5pc1xx/clock.c +++ b/arch/arm/mach-s5pc1xx/clock.c @@ -14,12 +14,8 @@ #define CLK_D 1 #define CLK_P 2 -#ifndef CONFIG_SYS_CLK_FREQ_C100 -#define CONFIG_SYS_CLK_FREQ_C100 12000000 -#endif -#ifndef CONFIG_SYS_CLK_FREQ_C110 -#define CONFIG_SYS_CLK_FREQ_C110 24000000 -#endif +#define CFG_SYS_CLK_FREQ_C100 12000000 +#define CFG_SYS_CLK_FREQ_C110 24000000 /* s5pc110: return pll clock frequency */ static unsigned long s5pc100_get_pll_clk(int pllreg) @@ -66,7 +62,7 @@ static unsigned long s5pc100_get_pll_clk(int pllreg) s = r & 0x7; /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */ - freq = CONFIG_SYS_CLK_FREQ_C100; + freq = CFG_SYS_CLK_FREQ_C100; fout = m * (freq / (p * (1 << s))); return fout; @@ -116,7 +112,7 @@ static unsigned long s5pc110_get_pll_clk(int pllreg) /* SDIV [2:0] */ s = r & 0x7; - freq = CONFIG_SYS_CLK_FREQ_C110; + freq = CFG_SYS_CLK_FREQ_C110; if (pllreg == APLL) { if (s < 1) s = 1; diff --git a/arch/arm/mach-zynqmp-r5/Kconfig b/arch/arm/mach-zynqmp-r5/Kconfig index 5e01754..f14514b 100644 --- a/arch/arm/mach-zynqmp-r5/Kconfig +++ b/arch/arm/mach-zynqmp-r5/Kconfig @@ -21,6 +21,12 @@ config SYS_CONFIG_NAME Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header will be used for board configuration. +config CPU_FREQ_HZ + int "CPU frequency" + default 800000000 + help + The value, in Hz, that the CPU clock is running at. + config SYS_MALLOC_F_LEN default 0x600 diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 1ab37cc..97c0b7b 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -128,6 +128,7 @@ config TARGET_COBRA5272 config TARGET_EB_CPU5282 bool "Support eb_cpu5282" select M5282 + select HW_WATCHDOG config TARGET_M5208EVBE bool "Support M5208EVBE" diff --git a/arch/nds32/cpu/n1213/ag101/timer.c b/arch/nds32/cpu/n1213/ag101/timer.c index 394fc10..f6dcbf1 100644 --- a/arch/nds32/cpu/n1213/ag101/timer.c +++ b/arch/nds32/cpu/n1213/ag101/timer.c @@ -9,6 +9,7 @@ */ #ifndef CONFIG_TIMER #include <common.h> +#include <clock_legacy.h> #include <init.h> #include <irq_func.h> #include <log.h> @@ -76,7 +77,7 @@ void reset_timer_masked(void) lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); #else lastdec = readl(&tmr->timer3_counter) / - (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ); + (get_board_sys_clk() / 2 / CONFIG_SYS_HZ); #endif timestamp = 0; /* start "advancing" time stamp from 0 */ @@ -101,7 +102,7 @@ ulong get_timer_masked(void) ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); #else ulong now = readl(&tmr->timer3_counter) / - (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ); + (get_board_sys_clk() / 2 / CONFIG_SYS_HZ); #endif debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec); @@ -155,7 +156,7 @@ void __udelay(unsigned long usec) #ifdef CONFIG_FTTMR010_EXT_CLK long tmo = usec * (TIMER_CLOCK / 1000) / 1000; #else - long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000; + long tmo = usec * ((get_board_sys_clk() / 2) / 1000) / 1000; #endif unsigned long now, last = readl(&tmr->timer3_counter); @@ -190,7 +191,7 @@ ulong get_tbclk(void) #ifdef CONFIG_FTTMR010_EXT_CLK return CONFIG_SYS_HZ; #else - return CONFIG_SYS_CLK_FREQ; + return get_board_sys_clk(); #endif } #endif /* CONFIG_TIMER */ diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index cff98f7..bcd8375 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -179,13 +179,6 @@ config ARCH_MPC837X select SYS_CACHE_SHIFT_5 select FSL_ELBC -config SYS_IMMR - hex "Value for IMMR" - default 0xE0000000 - help - Address for the Internal Memory-Mapped Registers (IMMR) window used - to configure the features of the SoC. - source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig" source "arch/powerpc/cpu/mpc83xx/bats/Kconfig" source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig" @@ -195,6 +188,13 @@ source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig" source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig" source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig" +config 83XX_PCICLK + hex "PCI clock frequency" + default 0xDEADBEEF + help + If required, the PCI clock frequency to use when configuring + the host bridge. + config FSL_ELBC bool diff --git a/arch/powerpc/cpu/mpc83xx/elbc/elbc.h b/arch/powerpc/cpu/mpc83xx/elbc/elbc.h index 245fe7c..e795cd1 100644 --- a/arch/powerpc/cpu/mpc83xx/elbc/elbc.h +++ b/arch/powerpc/cpu/mpc83xx/elbc/elbc.h @@ -1,173 +1,3 @@ -#ifdef CONFIG_ELBC_BR0_OR0 -#define CONFIG_SYS_BR0_PRELIM (\ - CONFIG_BR0_OR0_BASE |\ - CONFIG_BR0_PORTSIZE |\ - CONFIG_BR0_ERRORCHECKING |\ - CONFIG_BR0_WRITE_PROTECT_BIT |\ - CONFIG_BR0_MACHINE |\ - CONFIG_BR0_ATOMIC |\ - CONFIG_BR0_VALID_BIT \ -) -#define CONFIG_SYS_OR0_PRELIM (\ - CONFIG_OR0_AM |\ - CONFIG_OR0_XAM |\ - CONFIG_OR0_BCTLD |\ - CONFIG_OR0_BI |\ - CONFIG_OR0_COLS |\ - CONFIG_OR0_ROWS |\ - CONFIG_OR0_PMSEL |\ - CONFIG_OR0_SCY |\ - CONFIG_OR0_PGS |\ - CONFIG_OR0_CSCT |\ - CONFIG_OR0_CST |\ - CONFIG_OR0_CHT |\ - CONFIG_OR0_RST |\ - CONFIG_OR0_CSNT |\ - CONFIG_OR0_ACS |\ - CONFIG_OR0_XACS |\ - CONFIG_OR0_SETA |\ - CONFIG_OR0_TRLX |\ - CONFIG_OR0_EHTR |\ - CONFIG_OR0_EAD \ -) -#endif /* CONFIG_ELBC_BR0_OR0 */ - -#ifdef CONFIG_ELBC_BR1_OR1 -#define CONFIG_SYS_BR1_PRELIM (\ - CONFIG_BR1_OR1_BASE |\ - CONFIG_BR1_PORTSIZE |\ - CONFIG_BR1_ERRORCHECKING |\ - CONFIG_BR1_WRITE_PROTECT_BIT |\ - CONFIG_BR1_MACHINE |\ - CONFIG_BR1_ATOMIC |\ - CONFIG_BR1_VALID_BIT \ -) -#define CONFIG_SYS_OR1_PRELIM (\ - CONFIG_OR1_AM |\ - CONFIG_OR1_XAM |\ - CONFIG_OR1_BCTLD |\ - CONFIG_OR1_BI |\ - CONFIG_OR1_COLS |\ - CONFIG_OR1_ROWS |\ - CONFIG_OR1_PMSEL |\ - CONFIG_OR1_SCY |\ - CONFIG_OR1_PGS |\ - CONFIG_OR1_CSCT |\ - CONFIG_OR1_CST |\ - CONFIG_OR1_CHT |\ - CONFIG_OR1_RST |\ - CONFIG_OR1_CSNT |\ - CONFIG_OR1_ACS |\ - CONFIG_OR1_XACS |\ - CONFIG_OR1_SETA |\ - CONFIG_OR1_TRLX |\ - CONFIG_OR1_EHTR |\ - CONFIG_OR1_EAD \ -) -#endif /* CONFIG_ELBC_BR1_OR1 */ - -#ifdef CONFIG_ELBC_BR2_OR2 -#define CONFIG_SYS_BR2_PRELIM (\ - CONFIG_BR2_OR2_BASE |\ - CONFIG_BR2_PORTSIZE |\ - CONFIG_BR2_ERRORCHECKING |\ - CONFIG_BR2_WRITE_PROTECT_BIT |\ - CONFIG_BR2_MACHINE |\ - CONFIG_BR2_ATOMIC |\ - CONFIG_BR2_VALID_BIT \ -) -#define CONFIG_SYS_OR2_PRELIM (\ - CONFIG_OR2_AM |\ - CONFIG_OR2_XAM |\ - CONFIG_OR2_BCTLD |\ - CONFIG_OR2_BI |\ - CONFIG_OR2_COLS |\ - CONFIG_OR2_ROWS |\ - CONFIG_OR2_PMSEL |\ - CONFIG_OR2_SCY |\ - CONFIG_OR2_PGS |\ - CONFIG_OR2_CSCT |\ - CONFIG_OR2_CST |\ - CONFIG_OR2_CHT |\ - CONFIG_OR2_RST |\ - CONFIG_OR2_CSNT |\ - CONFIG_OR2_ACS |\ - CONFIG_OR2_XACS |\ - CONFIG_OR2_SETA |\ - CONFIG_OR2_TRLX |\ - CONFIG_OR2_EHTR |\ - CONFIG_OR2_EAD \ -) -#endif /* CONFIG_ELBC_BR2_OR2 */ - -#ifdef CONFIG_ELBC_BR3_OR3 -#define CONFIG_SYS_BR3_PRELIM (\ - CONFIG_BR3_OR3_BASE |\ - CONFIG_BR3_PORTSIZE |\ - CONFIG_BR3_ERRORCHECKING |\ - CONFIG_BR3_WRITE_PROTECT_BIT |\ - CONFIG_BR3_MACHINE |\ - CONFIG_BR3_ATOMIC |\ - CONFIG_BR3_VALID_BIT \ -) -#define CONFIG_SYS_OR3_PRELIM (\ - CONFIG_OR3_AM |\ - CONFIG_OR3_XAM |\ - CONFIG_OR3_BCTLD |\ - CONFIG_OR3_BI |\ - CONFIG_OR3_COLS |\ - CONFIG_OR3_ROWS |\ - CONFIG_OR3_PMSEL |\ - CONFIG_OR3_SCY |\ - CONFIG_OR3_PGS |\ - CONFIG_OR3_CSCT |\ - CONFIG_OR3_CST |\ - CONFIG_OR3_CHT |\ - CONFIG_OR3_RST |\ - CONFIG_OR3_CSNT |\ - CONFIG_OR3_ACS |\ - CONFIG_OR3_XACS |\ - CONFIG_OR3_SETA |\ - CONFIG_OR3_TRLX |\ - CONFIG_OR3_EHTR |\ - CONFIG_OR3_EAD \ -) -#endif /* CONFIG_ELBC_BR3_OR3 */ - -#ifdef CONFIG_ELBC_BR4_OR4 -#define CONFIG_SYS_BR4_PRELIM (\ - CONFIG_BR4_OR4_BASE |\ - CONFIG_BR4_PORTSIZE |\ - CONFIG_BR4_ERRORCHECKING |\ - CONFIG_BR4_WRITE_PROTECT_BIT |\ - CONFIG_BR4_MACHINE |\ - CONFIG_BR4_ATOMIC |\ - CONFIG_BR4_VALID_BIT \ -) -#define CONFIG_SYS_OR4_PRELIM (\ - CONFIG_OR4_AM |\ - CONFIG_OR4_XAM |\ - CONFIG_OR4_BCTLD |\ - CONFIG_OR4_BI |\ - CONFIG_OR4_COLS |\ - CONFIG_OR4_ROWS |\ - CONFIG_OR4_PMSEL |\ - CONFIG_OR4_SCY |\ - CONFIG_OR4_PGS |\ - CONFIG_OR4_CSCT |\ - CONFIG_OR4_CST |\ - CONFIG_OR4_CHT |\ - CONFIG_OR4_RST |\ - CONFIG_OR4_CSNT |\ - CONFIG_OR4_ACS |\ - CONFIG_OR4_XACS |\ - CONFIG_OR4_SETA |\ - CONFIG_OR4_TRLX |\ - CONFIG_OR4_EHTR |\ - CONFIG_OR4_EAD \ -) -#endif /* CONFIG_ELBC_BR4_OR4 */ - #if defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_0) #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c index c386e4e..d2b6b05 100644 --- a/arch/powerpc/cpu/mpc83xx/pcie.c +++ b/arch/powerpc/cpu/mpc83xx/pcie.c @@ -8,6 +8,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <pci.h> #include <mpc83xx.h> #include <asm/global_data.h> @@ -46,7 +47,7 @@ int get_pcie_clk(int index) clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); sccr = im->clk.sccr; - pci_sync_in = CONFIG_SYS_CLK_FREQ / (1 + clkin_div); + pci_sync_in = get_board_sys_clk() / (1 + clkin_div); spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; csb_clk = pci_sync_in * (1 + clkin_div) * spmf; diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index e5db96b..f835263 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -137,8 +137,8 @@ int get_clocks(void) clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); if (im->reset.rcwh & HRCWH_PCI_HOST) { -#if defined(CONFIG_SYS_CLK_FREQ) - pci_sync_in = CONFIG_SYS_CLK_FREQ / (1 + clkin_div); +#if CONFIG_SYS_CLK_FREQ != 0 + pci_sync_in = get_board_sys_clk() / (1 + clkin_div); #else pci_sync_in = 0xDEADBEEF; #endif diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c index 00cb2bd..11b1e61 100644 --- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c @@ -102,5 +102,5 @@ ulong get_bus_freq(ulong dummy) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u8 spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; - return CONFIG_SYS_CLK_FREQ * spmf; + return get_board_sys_clk() * spmf; } diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index c4953df..0944d19 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -14,8 +14,6 @@ #include <config.h> #include <mpc83xx.h> -#define CONFIG_83XX 1 /* needed for Linux kernel header files*/ - #include <ppc_asm.tmpl> #include <ppc_defs.h> @@ -115,9 +113,6 @@ disable_addr_trans: #ifndef CONFIG_DEFAULT_IMMR #error CONFIG_DEFAULT_IMMR must be defined #endif /* CONFIG_DEFAULT_IMMR */ -#ifndef CONFIG_SYS_IMMR -#define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR -#endif /* CONFIG_SYS_IMMR */ /* * After configuration, a system reset exception is executed using the diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 836aedd..4471754 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -109,6 +109,7 @@ config TARGET_QEMU_PPCE500 bool "Support qemu-ppce500" select ARCH_QEMU_E500 select PHYS_64BIT + imply OF_HAS_PRIOR_STAGE config TARGET_T1024RDB bool "Support T1024RDB" @@ -353,6 +354,7 @@ config ARCH_P1010 bool select FSL_LAW select SYS_CACHE_SHIFT_5 + select SYS_HAS_SERDES select SYS_FSL_ERRATUM_A004477 select SYS_FSL_ERRATUM_A004508 select SYS_FSL_ERRATUM_A005125 @@ -1000,6 +1002,9 @@ config SYS_FSL_ERRATUM_SRIO_A004034 config SYS_FSL_ERRATUM_USB14 bool +config SYS_HAS_SERDES + bool + config SYS_P4080_ERRATUM_CPU22 bool @@ -1083,9 +1088,6 @@ config SYS_PPC64 config SYS_PPC_E500_USE_DEBUG_TLB bool -config FSL_IFC - bool - config FSL_ELBC bool diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 3f2fc06..d4b828e 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -662,9 +662,9 @@ void ft_cpu_setup(void *blob, struct bd_info *bd) #ifdef CONFIG_FSL_CORENET do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0", - "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); + "clock-frequency", get_board_sys_clk(), 1); do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0", - "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); + "clock-frequency", get_board_sys_clk(), 1); do_fixup_by_compat_u32(blob, "fsl,mpic", "clock-frequency", get_bus_freq(0)/2, 1); #else diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 1fe914a..5a9cd28 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -75,7 +75,7 @@ void get_sys_info(sys_info_t *sys_info) uint rcw_tmp; #endif uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS]; - unsigned long sysclk = CONFIG_SYS_CLK_FREQ; + unsigned long sysclk = get_board_sys_clk(); uint mem_pll_rat; sys_info->freq_systembus = sysclk; @@ -102,7 +102,7 @@ void get_sys_info(sys_info_t *sys_info) * are driven by differential sysclock. */ if (ddr_refclk_sel == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK) - sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ; + sys_info->freq_ddrbus = get_board_sys_clk(); else #endif #if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ) @@ -526,7 +526,7 @@ void get_sys_info(sys_info_t *sys_info) plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; - sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = plat_ratio * get_board_sys_clk(); /* Divide before multiply to avoid integer * overflow for processor speeds above 2GHz */ @@ -554,7 +554,7 @@ void get_sys_info(sys_info_t *sys_info) #else qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT; - sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_qe = qe_ratio * get_board_sys_clk(); #endif #endif diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index 936cbda..d630711 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -84,94 +84,6 @@ config SYS_DER help Debug Event Register (37-47) -comment "Memory mapping" - -config SYS_BR0_PRELIM - hex "Preliminary value for BR0" - -config SYS_OR0_PRELIM - hex "Preliminary value for OR0" - -config SYS_BR1_PRELIM_BOOL - bool "Define Bank 1" - -config SYS_BR1_PRELIM - hex "Preliminary value for BR1" - depends on SYS_BR1_PRELIM_BOOL - -config SYS_OR1_PRELIM - hex "Preliminary value for OR1" - depends on SYS_BR1_PRELIM_BOOL - -config SYS_BR2_PRELIM_BOOL - bool "Define Bank 2" - -config SYS_BR2_PRELIM - hex "Preliminary value for BR2" - depends on SYS_BR2_PRELIM_BOOL - -config SYS_OR2_PRELIM - hex "Preliminary value for OR2" - depends on SYS_BR2_PRELIM_BOOL - -config SYS_BR3_PRELIM_BOOL - bool "Define Bank 3" - -config SYS_BR3_PRELIM - hex "Preliminary value for BR3" - depends on SYS_BR3_PRELIM_BOOL - -config SYS_OR3_PRELIM - hex "Preliminary value for OR3" - depends on SYS_BR3_PRELIM_BOOL - -config SYS_BR4_PRELIM_BOOL - bool "Define Bank 4" - -config SYS_BR4_PRELIM - hex "Preliminary value for BR4" - depends on SYS_BR4_PRELIM_BOOL - -config SYS_OR4_PRELIM - hex "Preliminary value for OR4" - depends on SYS_BR4_PRELIM_BOOL - -config SYS_BR5_PRELIM_BOOL - bool "Define Bank 5" - -config SYS_BR5_PRELIM - hex "Preliminary value for BR5" - depends on SYS_BR5_PRELIM_BOOL - -config SYS_OR5_PRELIM - hex "Preliminary value for OR5" - depends on SYS_BR5_PRELIM_BOOL - -config SYS_BR6_PRELIM_BOOL - bool "Define Bank 6" - -config SYS_BR6_PRELIM - hex "Preliminary value for BR6" - depends on SYS_BR6_PRELIM_BOOL - -config SYS_OR6_PRELIM - hex "Preliminary value for OR6" - depends on SYS_BR6_PRELIM_BOOL - -config SYS_BR7_PRELIM_BOOL - bool "Define Bank 7" - -config SYS_BR7_PRELIM - hex "Preliminary value for BR7" - depends on SYS_BR7_PRELIM_BOOL - -config SYS_OR7_PRELIM - hex "Preliminary value for OR7" - depends on SYS_BR7_PRELIM_BOOL - -config SYS_IMMR - hex "Value for IMMR" - source "board/cssi/MCR3000/Kconfig" endmenu diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile index ceaa8ce..66d22ae 100644 --- a/arch/powerpc/dts/Makefile +++ b/arch/powerpc/dts/Makefile @@ -18,6 +18,7 @@ dtb-$(CONFIG_TARGET_P2041RDB) += p2041rdb.dtb dtb-$(CONFIG_TARGET_P3041DS) += p3041ds.dtb dtb-$(CONFIG_TARGET_P4080DS) += p4080ds.dtb dtb-$(CONFIG_TARGET_P5040DS) += p5040ds.dtb +dtb-$(CONFIG_TARGET_QEMU_PPCE500) += qemu-ppce500.dtb dtb-$(CONFIG_TARGET_SOCRATES) += socrates.dtb dtb-$(CONFIG_TARGET_T1024RDB) += t1024rdb.dtb dtb-$(CONFIG_TARGET_T1042D4RDB) += t1042d4rdb.dtb diff --git a/arch/powerpc/dts/qemu-ppce500.dts b/arch/powerpc/dts/qemu-ppce500.dts new file mode 100644 index 0000000..e88e09e --- /dev/null +++ b/arch/powerpc/dts/qemu-ppce500.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Empty device tree for qemu-ppce400 + * + * Copyright 2021 Google LLC + */ +/dts-v1/; + +/ { +}; diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index a97b72d..3541371 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -51,9 +51,6 @@ /* The FMAN driver uses the PHYLIB infrastructure */ -/* All PPC boards must swap IDE bytes */ -#define CONFIG_IDE_SWAP_IO - #if defined(CONFIG_DM_SERIAL) && !defined(CONFIG_CLK_MPC83XX) /* * TODO: Convert this to a clock driver exists that can give us the UART diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile index b6e9166..90d3f35 100644 --- a/arch/riscv/dts/Makefile +++ b/arch/riscv/dts/Makefile @@ -2,7 +2,7 @@ dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb -dtb-$(CONFIG_TARGET_QEMU_VIRT) += qemu-virt.dtb +dtb-$(CONFIG_TARGET_QEMU_VIRT) += qemu-virt32.dtb qemu-virt64.dtb dtb-$(CONFIG_TARGET_OPENPITON_RISCV64) += openpiton-riscv64.dtb dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb diff --git a/arch/riscv/dts/qemu-virt.dts b/arch/riscv/dts/qemu-virt32.dts index fecff54..17e2f0d 100644 --- a/arch/riscv/dts/qemu-virt.dts +++ b/arch/riscv/dts/qemu-virt32.dts @@ -6,3 +6,6 @@ /dts-v1/; #include "binman.dtsi" + +/ { +}; diff --git a/arch/riscv/dts/qemu-virt64.dts b/arch/riscv/dts/qemu-virt64.dts new file mode 100644 index 0000000..17e2f0d --- /dev/null +++ b/arch/riscv/dts/qemu-virt64.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2021, Bin Meng <bmeng.cn@gmail.com> + */ + +/dts-v1/; + +#include "binman.dtsi" + +/ { +}; diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig index 7606469..477c519 100644 --- a/arch/sandbox/Kconfig +++ b/arch/sandbox/Kconfig @@ -1,9 +1,6 @@ menu "Sandbox architecture" depends on SANDBOX -config ARCH_MAP_SYSMEM - def_bool y - config SYS_ARCH default "sandbox" @@ -68,4 +65,14 @@ config SANDBOX_BITS_PER_LONG default 32 if HOST_32BIT default 64 if HOST_64BIT +config SYS_FDT_LOAD_ADDR + hex "Address at which to load devicetree" + default 0x100 + help + With sandbox the devicetree is loaded into the emulated RAM. This sets + the address that is used. There must be enough space at this address + to load the full devicetree without it overwriting anything else. + + See `doc/arch/sandbox.rst` for more information. + endmenu diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index b72dafc..6837bfc 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -211,6 +211,16 @@ int os_map_file(const char *pathname, int os_flags, void **bufp, int *sizep) return 0; } +int os_unmap(void *buf, int size) +{ + if (munmap(buf, size)) { + printf("Can't unmap %p %x\n", buf, size); + return -EIO; + } + + return 0; +} + /* Restore tty state when we exit */ static struct termios orig_term; static bool term_setup; @@ -628,7 +638,7 @@ int os_get_filesize(const char *fname, loff_t *size) void os_putc(int ch) { - putchar(ch); + fputc(ch, stdout); } void os_puts(const char *str) diff --git a/arch/sandbox/cpu/sdl.c b/arch/sandbox/cpu/sdl.c index bef5abd..f4ca36b 100644 --- a/arch/sandbox/cpu/sdl.c +++ b/arch/sandbox/cpu/sdl.c @@ -44,6 +44,9 @@ struct buf_info { * @stopping: true if audio will stop once it runs out of data * @texture: SDL texture to use for U-Boot display contents * @renderer: SDL renderer to use + * @screen: SDL window to use + * @src_depth: Number of bits per pixel in the source frame buffer (that we read + * from and render to SDL) */ static struct sdl_info { int width; @@ -61,6 +64,8 @@ static struct sdl_info { bool stopping; SDL_Texture *texture; SDL_Renderer *renderer; + SDL_Window *screen; + int src_depth; } sdl; static void sandbox_sdl_poll_events(void) @@ -98,6 +103,23 @@ static int sandbox_sdl_ensure_init(void) return 0; } +int sandbox_sdl_remove_display(void) +{ + if (!sdl.renderer) { + printf("SDL renderer does not exist\n"); + return -ENOENT; + } + + SDL_DestroyTexture(sdl.texture); + SDL_DestroyRenderer(sdl.renderer); + SDL_DestroyWindow(sdl.screen); + sdl.texture = NULL; + sdl.renderer = NULL; + sdl.screen = NULL; + + return 0; +} + int sandbox_sdl_init_display(int width, int height, int log2_bpp, bool double_size) { @@ -109,6 +131,9 @@ int sandbox_sdl_init_display(int width, int height, int log2_bpp, err = sandbox_sdl_ensure_init(); if (err) return err; + if (sdl.renderer) + sandbox_sdl_remove_display(); + if (SDL_InitSubSystem(SDL_INIT_VIDEO) < 0) { printf("Unable to initialise SDL LCD: %s\n", SDL_GetError()); return -EPERM; @@ -126,22 +151,20 @@ int sandbox_sdl_init_display(int width, int height, int log2_bpp, if (!SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "1")) printf("Unable to init hinting: %s", SDL_GetError()); + sdl.src_depth = 1 << log2_bpp; + if (log2_bpp != 4 && log2_bpp != 5) + log2_bpp = 5; sdl.depth = 1 << log2_bpp; sdl.pitch = sdl.width * sdl.depth / 8; - SDL_Window *screen = SDL_CreateWindow("U-Boot", SDL_WINDOWPOS_UNDEFINED, - SDL_WINDOWPOS_UNDEFINED, - sdl.vis_width, sdl.vis_height, - SDL_WINDOW_RESIZABLE); - if (!screen) { + sdl.screen = SDL_CreateWindow("U-Boot", SDL_WINDOWPOS_UNDEFINED, + SDL_WINDOWPOS_UNDEFINED, sdl.vis_width, + sdl.vis_height, SDL_WINDOW_RESIZABLE); + if (!sdl.screen) { printf("Unable to initialise SDL screen: %s\n", SDL_GetError()); return -EIO; } - if (log2_bpp != 4 && log2_bpp != 5) { - printf("U-Boot SDL does not support depth %d\n", log2_bpp); - return -EINVAL; - } - sdl.renderer = SDL_CreateRenderer(screen, -1, + sdl.renderer = SDL_CreateRenderer(sdl.screen, -1, SDL_RENDERER_ACCELERATED | SDL_RENDERER_PRESENTVSYNC); if (!sdl.renderer) { @@ -165,6 +188,55 @@ int sandbox_sdl_init_display(int width, int height, int log2_bpp, return 0; } +static int copy_to_texture(void *lcd_base) +{ + char *dest; + int pitch, x, y; + int src_pitch; + void *pixels; + char *src; + int ret; + + if (sdl.src_depth == sdl.depth) { + SDL_UpdateTexture(sdl.texture, NULL, lcd_base, sdl.pitch); + return 0; + } + + /* + * We only support copying from an 8bpp to a 32bpp texture since the + * other cases are supported directly by the texture. + */ + if (sdl.depth != 32 && sdl.src_depth != 8) { + printf("Need depth 32bpp for copy\n"); + return -EINVAL; + } + + ret = SDL_LockTexture(sdl.texture, NULL, &pixels, &pitch); + if (ret) { + printf("SDL lock %d: %s\n", ret, SDL_GetError()); + return ret; + } + + /* Copy the pixels one by one */ + src_pitch = sdl.width * sdl.src_depth / 8; + for (y = 0; y < sdl.height; y++) { + char val; + + dest = pixels + y * pitch; + src = lcd_base + src_pitch * y; + for (x = 0; x < sdl.width; x++, dest += 4) { + val = *src++; + dest[0] = val; + dest[1] = val; + dest[2] = val; + dest[3] = 0; + } + } + SDL_UnlockTexture(sdl.texture); + + return 0; +} + int sandbox_sdl_sync(void *lcd_base) { struct SDL_Rect rect; @@ -173,7 +245,11 @@ int sandbox_sdl_sync(void *lcd_base) if (!sdl.texture) return 0; SDL_RenderClear(sdl.renderer); - SDL_UpdateTexture(sdl.texture, NULL, lcd_base, sdl.pitch); + ret = copy_to_texture(lcd_base); + if (ret) { + printf("copy_to_texture: %d: %s\n", ret, SDL_GetError()); + return -EIO; + } ret = SDL_RenderCopy(sdl.renderer, sdl.texture, NULL, NULL); if (ret) { printf("SDL copy %d: %s\n", ret, SDL_GetError()); diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 2cea4a4..48ca3e1 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -207,6 +207,7 @@ test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>; test5-gpios = <&gpio_a 19>; + bool-value; int-value = <1234>; uint-value = <(-1234)>; int64-value = /bits/ 64 <0x1111222233334444>; diff --git a/arch/sandbox/include/asm/sdl.h b/arch/sandbox/include/asm/sdl.h index 47fc488..25dbdb5 100644 --- a/arch/sandbox/include/asm/sdl.h +++ b/arch/sandbox/include/asm/sdl.h @@ -26,6 +26,13 @@ int sandbox_sdl_init_display(int width, int height, int log2_bpp, bool double_size); /** + * sandbox_sdl_remove_display() - Remove the SDL screen + * + * @return 0 if OK, -ENOENT if the SDL had not been inited. + */ +int sandbox_sdl_remove_display(void); + +/** * sandbox_sdl_sync() - Sync current U-Boot LCD frame buffer to SDL * * This must be called periodically to update the screen for SDL so that the diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h index dab1a4e..0aad827 100644 --- a/arch/sandbox/include/asm/test.h +++ b/arch/sandbox/include/asm/test.h @@ -8,6 +8,8 @@ #ifndef __ASM_TEST_H #define __ASM_TEST_H +#include <video.h> + /* The sandbox driver always permits an I2C device with this address */ #define SANDBOX_I2C_TEST_ADDR 0x59 @@ -285,4 +287,20 @@ void sandbox_cros_ec_set_test_flags(struct udevice *dev, uint flags); */ int sandbox_cros_ec_get_pwm_duty(struct udevice *dev, uint index, uint *duty); +/** + * sandbox_sdl_set_bpp() - Set the depth of the sandbox display + * + * The device must not be active when this function is called. It activiates it + * before returning. + * + * This updates the depth value and adjusts a few other settings accordingly. + * It must be called before the display is probed. + * + * @dev: Device to adjust + * @l2bpp: depth to set + * @return 0 if the device was already active, other error if it fails to probe + * after the change + */ +int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp); + #endif diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 7836869..7e6cb70 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -4,13 +4,17 @@ menu "SuperH architecture" config CPU_SH4 bool +config CPU_SH7751 + bool + select CPU_SH4 + choice prompt "Target select" optional config TARGET_R2DPLUS bool "Renesas R2D-PLUS" - select CPU_SH4 + select CPU_SH7751 endchoice diff --git a/arch/sh/include/asm/config.h b/arch/sh/include/asm/config.h index 406156d..09a15da 100644 --- a/arch/sh/include/asm/config.h +++ b/arch/sh/include/asm/config.h @@ -11,6 +11,6 @@ /* Timer */ #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (CONFIG_SYS_CLK_FREQ / 4) +#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 4) #endif diff --git a/arch/x86/cpu/efi/payload.c b/arch/x86/cpu/efi/payload.c index 3a9f7d7..04ce188 100644 --- a/arch/x86/cpu/efi/payload.c +++ b/arch/x86/cpu/efi/payload.c @@ -7,6 +7,7 @@ #include <common.h> #include <cpu_func.h> #include <efi.h> +#include <efi_api.h> #include <errno.h> #include <init.h> #include <log.h> @@ -296,8 +297,14 @@ void setup_efi_info(struct efi_info *efi_info) void efi_show_bdinfo(void) { struct efi_entry_systable *table = NULL; + struct efi_system_table *sys_table; int size, ret; ret = efi_info_get(EFIET_SYS_TABLE, (void **)&table, &size); - bdinfo_print_num_l("efi_table", (ulong)table); + if (!ret) { + bdinfo_print_num_l("efi_table", table->sys_table); + sys_table = (struct efi_system_table *)(uintptr_t) + table->sys_table; + bdinfo_print_num_l(" revision", sys_table->fw_revision); + } } diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile index be209aa..5c8c05e 100644 --- a/arch/x86/dts/Makefile +++ b/arch/x86/dts/Makefile @@ -24,7 +24,7 @@ dtb-y += bayleybay.dtb \ targets += $(dtb-y) -DTC_FLAGS += -R 4 -p 0x1000 +DTC_FLAGS += -R 4 -p $(if $(CONFIG_EFI_APP),0x8000,0x1000) PHONY += dtbs dtbs: $(addprefix $(obj)/, $(dtb-y)) diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c index 667e5e6..57cba5c 100644 --- a/arch/x86/lib/bootm.c +++ b/arch/x86/lib/bootm.c @@ -179,10 +179,14 @@ int boot_linux_kernel(ulong setup_base, ulong load_address, bool image_64bit) * U-Boot is setting them up that way for itself in * arch/i386/cpu/cpu.c. * - * Note that we cannot currently boot a kernel while running as - * an EFI application. Please use the payload option for that. + * Note: this is incomplete for EFI kernels! + * + * This can boot a kernel while running as an EFI application, + * but if the kernel requires EFI support then that support needs + * to be enabled first (see EFI_LOADER). Also the EFI information + * must enabled with setup_efi_info(). See setup_zimage() for + * how this is done with the stub. */ -#ifndef CONFIG_EFI_APP __asm__ __volatile__ ( "movl $0, %%ebp\n" "cli\n" @@ -191,7 +195,6 @@ int boot_linux_kernel(ulong setup_base, ulong load_address, bool image_64bit) [boot_params] "S"(setup_base), "b"(0), "D"(0) ); -#endif } /* We can't get to here */ diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 7ce0222..9cc0449 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -365,11 +365,14 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, strcpy(cmd_line, (char *)cmdline_force); else build_command_line(cmd_line, auto_boot); - ret = bootm_process_cmdline(cmd_line, max_size, BOOTM_CL_ALL); - if (ret) { - printf("Cmdline setup failed (max_size=%x, bootproto=%x, err=%d)\n", - max_size, bootproto, ret); - return ret; + if (IS_ENABLED(CONFIG_CMD_BOOTM)) { + ret = bootm_process_cmdline(cmd_line, max_size, + BOOTM_CL_ALL); + if (ret) { + printf("Cmdline setup failed (max_size=%x, bootproto=%x, err=%d)\n", + max_size, bootproto, ret); + return ret; + } } printf("Kernel command line: \""); puts(cmd_line); diff --git a/arch/xtensa/lib/time.c b/arch/xtensa/lib/time.c index 3a02c38..1c927d2 100644 --- a/arch/xtensa/lib/time.c +++ b/arch/xtensa/lib/time.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <time.h> #include <asm/global_data.h> #include <linux/delay.h> @@ -51,7 +52,7 @@ static void delay_cycles(unsigned cycles) void __udelay(unsigned long usec) { ulong lo, hi, i; - ulong mhz = CONFIG_SYS_CLK_FREQ / 1000000; + ulong mhz = get_board_sys_clk() / 1000000; /* Scale to support full 32-bit usec range */ @@ -74,7 +75,7 @@ ulong get_timer(ulong base) #if XCHAL_HAVE_CCOUNT register ulong ccount; __asm__ volatile ("rsr %0, CCOUNT" : "=a"(ccount)); - return ccount / (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - base; + return ccount / (get_board_sys_clk() / CONFIG_SYS_HZ) - base; #else /* * Add at least the overhead of this call (in cycles). @@ -85,7 +86,7 @@ ulong get_timer(ulong base) */ fake_ccount += 20; - return fake_ccount / (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - base; + return fake_ccount / (get_board_sys_clk() / CONFIG_SYS_HZ) - base; #endif } @@ -114,6 +115,6 @@ unsigned long timer_get_us(void) unsigned long ccount; __asm__ volatile ("rsr %0, CCOUNT" : "=a"(ccount)); - return ccount / (CONFIG_SYS_CLK_FREQ / 1000000); + return ccount / (get_board_sys_clk() / 1000000); } #endif diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c index 2202eb8..3eb5cb4 100644 --- a/board/CZ.NIC/turris_mox/turris_mox.c +++ b/board/CZ.NIC/turris_mox/turris_mox.c @@ -41,22 +41,14 @@ #define ARMADA_37XX_SPI_DOUT (MVEBU_REGISTER(0x10608)) #define ARMADA_37XX_SPI_DIN (MVEBU_REGISTER(0x1060c)) -#define ETH1_PATH "/soc/internal-regs@d0000000/ethernet@40000" -#define MDIO_PATH "/soc/internal-regs@d0000000/mdio@32004" -#define SFP_GPIO_PATH "/soc/internal-regs@d0000000/spi@10600/moxtet@1/gpio@0" -#define PCIE_PATH "/soc/pcie@d0070000" -#define SFP_PATH "/sfp" -#define LED_PATH "/leds/led" -#define BUTTON_PATH "/gpio-keys/reset" - DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_OF_BOARD_FIXUP) int board_fix_fdt(void *blob) { + enum fdt_status status_pcie, status_eth1; u8 topology[MAX_MOX_MODULES]; - int i, size, node; - bool enable; + int i, size, ret; /* * SPI driver is not loaded in driver model yet, but we have to find out @@ -64,15 +56,20 @@ int board_fix_fdt(void *blob) * to read SPI by reading/writing SPI registers directly */ - writel(0x10df, ARMADA_37XX_SPI_CFG); /* put pin from GPIO to SPI mode */ clrbits_le32(ARMADA_37XX_NB_GPIO_SEL, BIT(12)); + /* configure cpol, cpha, prescale */ + writel(0x10df, ARMADA_37XX_SPI_CFG); + mdelay(1); /* enable SPI CS1 */ setbits_le32(ARMADA_37XX_SPI_CTRL, BIT(17)); while (!(readl(ARMADA_37XX_SPI_CTRL) & 0x2)) udelay(1); + status_pcie = FDT_STATUS_DISABLED; + status_eth1 = FDT_STATUS_DISABLED; + for (i = 0; i < MAX_MOX_MODULES; ++i) { writel(0x0, ARMADA_37XX_SPI_DOUT); @@ -84,6 +81,11 @@ int board_fix_fdt(void *blob) break; topology[i] &= 0xf; + + if (topology[i] == MOX_MODULE_SFP || + topology[i] == MOX_MODULE_TOPAZ || + topology[i] == MOX_MODULE_PERIDOT) + status_eth1 = FDT_STATUS_OKAY; } size = i; @@ -91,24 +93,21 @@ int board_fix_fdt(void *blob) /* disable SPI CS1 */ clrbits_le32(ARMADA_37XX_SPI_CTRL, BIT(17)); + ret = fdt_set_status_by_alias(blob, "ethernet1", status_eth1); + if (ret < 0) + printf("Cannot set status for eth1 in U-Boot's device tree: %s!\n", + fdt_strerror(ret)); + if (size > 1 && (topology[1] == MOX_MODULE_PCI || topology[1] == MOX_MODULE_USB3 || topology[1] == MOX_MODULE_PASSPCI)) - enable = true; - else - enable = false; - - node = fdt_path_offset(blob, PCIE_PATH); - - if (node < 0) { - printf("Cannot find PCIe node in U-Boot's device tree!\n"); - return 0; - } + status_pcie = FDT_STATUS_OKAY; - if (fdt_setprop_string(blob, node, "status", - enable ? "okay" : "disabled") < 0) { - printf("Cannot %s PCIe in U-Boot's device tree!\n", - enable ? "enable" : "disable"); + ret = fdt_set_status_by_compatible(blob, "marvell,armada-3700-pcie", + status_pcie); + if (ret < 0) { + printf("Cannot set status for PCIe in U-Boot's device tree: %s!\n", + fdt_strerror(ret)); return 0; } @@ -416,12 +415,18 @@ static bool read_reset_button(void) struct udevice *button, *led; int i; - if (device_get_global_by_ofnode(ofnode_path(BUTTON_PATH), &button)) { + if (device_get_global_by_ofnode( + ofnode_first_subnode(ofnode_by_compatible(ofnode_null(), + "gpio-keys")), + &button)) { printf("Cannot find reset button!\n"); return false; } - if (device_get_global_by_ofnode(ofnode_path(LED_PATH), &led)) { + if (device_get_global_by_ofnode( + ofnode_first_subnode(ofnode_by_compatible(ofnode_null(), + "gpio-leds")), + &led)) { printf("Cannot find status LED!\n"); return false; } @@ -607,9 +612,6 @@ int show_board_info(void) } } - if (module_count) - printf("\n"); - return 0; } @@ -664,92 +666,34 @@ handle_reset_btn: #if defined(CONFIG_OF_BOARD_SETUP) -static int vnode_by_path(void *blob, const char *fmt, va_list ap) +static bool is_topaz(int id) { - char path[128]; - - vsnprintf(path, 128, fmt, ap); - return fdt_path_offset(blob, path); + return topaz && id == peridot + topaz - 1; } -static int node_by_path(void *blob, const char *fmt, ...) +static int switch_addr(int id) { - va_list ap; - int res; - - va_start(ap, fmt); - res = vnode_by_path(blob, fmt, ap); - va_end(ap); - - return res; + return is_topaz(id) ? 0x2 : 0x10 + id; } -static int phandle_by_path(void *blob, const char *fmt, ...) +static int setup_switch(void *blob, int id) { - va_list ap; - int node, phandle, res; - - va_start(ap, fmt); - node = vnode_by_path(blob, fmt, ap); - va_end(ap); + int res, addr, i, node; + char mdio_path[64]; + node = fdt_node_offset_by_compatible(blob, -1, "marvell,orion-mdio"); if (node < 0) return node; - phandle = fdt_get_phandle(blob, node); - if (phandle > 0) - return phandle; - - phandle = fdt_get_max_phandle(blob); - if (phandle < 0) - return phandle; - - phandle += 1; - - res = fdt_setprop_u32(blob, node, "linux,phandle", phandle); + res = fdt_get_path(blob, node, mdio_path, sizeof(mdio_path)); if (res < 0) return res; - res = fdt_setprop_u32(blob, node, "phandle", phandle); - if (res < 0) - return res; - - return phandle; -} - -static int enable_by_path(void *blob, const char *fmt, ...) -{ - va_list ap; - int node; - - va_start(ap, fmt); - node = vnode_by_path(blob, fmt, ap); - va_end(ap); - - if (node < 0) - return node; - - return fdt_setprop_string(blob, node, "status", "okay"); -} - -static bool is_topaz(int id) -{ - return topaz && id == peridot + topaz - 1; -} - -static int switch_addr(int id) -{ - return is_topaz(id) ? 0x2 : 0x10 + id; -} - -static int setup_switch(void *blob, int id) -{ - int res, addr, i, node, phandle; - addr = switch_addr(id); /* first enable the switch by setting status = "okay" */ - res = enable_by_path(blob, MDIO_PATH "/switch%i@%x", id, addr); + res = fdt_status_okay_by_pathf(blob, "%s/switch%i@%x", mdio_path, id, + addr); if (res < 0) return res; @@ -758,13 +702,13 @@ static int setup_switch(void *blob, int id) * enable corresponding ports */ if (id < peridot + topaz - 1) { - res = enable_by_path(blob, - MDIO_PATH "/switch%i@%x/ports/port@a", - id, addr); + res = fdt_status_okay_by_pathf(blob, + "%s/switch%i@%x/ports/port@a", + mdio_path, id, addr); } else if (id == peridot - 1 && !topaz && sfp) { - res = enable_by_path(blob, - MDIO_PATH "/switch%i@%x/ports/port-sfp@a", - id, addr); + res = fdt_status_okay_by_pathf(blob, + "%s/switch%i@%x/ports/port-sfp@a", + mdio_path, id, addr); } else { res = 0; } @@ -775,18 +719,21 @@ static int setup_switch(void *blob, int id) return 0; /* finally change link property if needed */ - node = node_by_path(blob, MDIO_PATH "/switch%i@%x/ports/port@a", id, - addr); + node = fdt_node_offset_by_pathf(blob, "%s/switch%i@%x/ports/port@a", + mdio_path, id, addr); if (node < 0) return node; for (i = id + 1; i < peridot + topaz; ++i) { - phandle = phandle_by_path(blob, - MDIO_PATH "/switch%i@%x/ports/port@%x", - i, switch_addr(i), - is_topaz(i) ? 5 : 9); - if (phandle < 0) - return phandle; + unsigned int phandle; + + phandle = fdt_create_phandle_by_pathf(blob, + "%s/switch%i@%x/ports/port@%x", + mdio_path, i, + switch_addr(i), + is_topaz(i) ? 5 : 9); + if (!phandle) + return -FDT_ERR_NOPHANDLES; if (i == id + 1) res = fdt_setprop_u32(blob, node, "link", phandle); @@ -799,38 +746,17 @@ static int setup_switch(void *blob, int id) return 0; } -static int remove_disabled_nodes(void *blob) -{ - while (1) { - int res, offset; - - offset = fdt_node_offset_by_prop_value(blob, -1, "status", - "disabled", 9); - if (offset < 0) - break; - - res = fdt_del_node(blob, offset); - if (res < 0) - return res; - } - - return 0; -} - int ft_board_setup(void *blob, struct bd_info *bd) { - int node, phandle, res; + int res; /* * If MOX B (PCI), MOX F (USB) or MOX G (Passthrough PCI) modules are * connected, enable the PCIe node. */ if (pci || usb || passpci) { - node = fdt_path_offset(blob, PCIE_PATH); - if (node < 0) - return node; - - res = fdt_setprop_string(blob, node, "status", "okay"); + res = fdt_status_okay_by_compatible(blob, + "marvell,armada-3700-pcie"); if (res < 0) return res; @@ -847,7 +773,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) if (peridot || topaz) { int i; - res = enable_by_path(blob, ETH1_PATH); + res = fdt_status_okay_by_alias(blob, "ethernet1"); if (res < 0) return res; @@ -865,20 +791,25 @@ int ft_board_setup(void *blob, struct bd_info *bd) * Also enable and configure SFP GPIO controller node. */ if (sfp) { - res = enable_by_path(blob, SFP_PATH); + int node; + + res = fdt_status_okay_by_compatible(blob, "sff,sfp"); if (res < 0) return res; - res = enable_by_path(blob, ETH1_PATH); + res = fdt_status_okay_by_alias(blob, "ethernet1"); if (res < 0) return res; if (!peridot) { - phandle = phandle_by_path(blob, SFP_PATH); - if (phandle < 0) - return res; + unsigned int phandle; + + phandle = fdt_create_phandle_by_compatible(blob, + "sff,sfp"); + if (!phandle) + return -FDT_ERR_NOPHANDLES; - node = node_by_path(blob, ETH1_PATH); + node = fdt_path_offset(blob, "ethernet1"); if (node < 0) return node; @@ -892,7 +823,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) return res; } - res = enable_by_path(blob, SFP_GPIO_PATH); + res = fdt_status_okay_by_compatible(blob, "cznic,moxtet-gpio"); if (res < 0) return res; @@ -900,7 +831,8 @@ int ft_board_setup(void *blob, struct bd_info *bd) char newname[16]; /* moxtet-sfp is on non-zero position, change default */ - node = node_by_path(blob, SFP_GPIO_PATH); + node = fdt_node_offset_by_compatible(blob, -1, + "cznic,moxtet-gpio"); if (node < 0) return node; @@ -919,7 +851,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) fdt_fixup_ethernet(blob); /* Finally remove disabled nodes, as per Rob Herring's request. */ - remove_disabled_nodes(blob); + fdt_delete_disabled_nodes(blob); return 0; } diff --git a/board/LaCie/net2big_v2/Kconfig b/board/LaCie/net2big_v2/Kconfig index ba460db..758d25e 100644 --- a/board/LaCie/net2big_v2/Kconfig +++ b/board/LaCie/net2big_v2/Kconfig @@ -1,5 +1,16 @@ if TARGET_NET2BIG_V2 +choice + prompt "Board variant" + +config D2NET_V2 + bool "D2NET v2" + +config NET2BIG_V2 + bool "NET2BIG v2" + +endchoice + config SYS_BOARD default "net2big_v2" diff --git a/board/LaCie/netspace_v2/Kconfig b/board/LaCie/netspace_v2/Kconfig index 930b822..4eca1d4 100644 --- a/board/LaCie/netspace_v2/Kconfig +++ b/board/LaCie/netspace_v2/Kconfig @@ -1,5 +1,30 @@ if TARGET_NETSPACE_V2 +choice + prompt "Board variant" + +config INETSPACE_V2 + bool "INETSPACE v2" + select KW88F6281 + +config NETSPACE_LITE_V2 + bool "NETSPACE LITE v2" + select KW88F6192 + +config NETSPACE_MAX_V2 + bool "NETSPACE MAX v2" + select KW88F6281 + +config NETSPACE_MINI_V2 + bool "NETSPACE MINI v2" + select KW88F6192 + +config NETSPACE_V2 + bool "NETSPACE v2" + select KW88F6281 + +endchoice + config SYS_BOARD default "netspace_v2" diff --git a/board/Marvell/octeon_ebb7304/board.c b/board/Marvell/octeon_ebb7304/board.c index e8e2d54..c6c7c13 100644 --- a/board/Marvell/octeon_ebb7304/board.c +++ b/board/Marvell/octeon_ebb7304/board.c @@ -205,7 +205,7 @@ static int fdt_fix_mix(const void *fdt) int env_lmac = -1; int lmac_fdt_node = -1; int mix_fdt_node = -1; - int lmac_phandle; + unsigned int lmac_phandle; char *compat; /* Get the lmac for this environment variable */ @@ -229,8 +229,7 @@ static int fdt_fix_mix(const void *fdt) } } - lmac_phandle = fdt_alloc_phandle((void *)fdt); - fdt_set_phandle((void *)fdt, lmac_fdt_node, lmac_phandle); + lmac_phandle = fdt_create_phandle((void *)fdt, lmac_fdt_node); /* Get the fdt mix node corresponding to this lmac */ mix_fdt_node = get_mix_fdt_node(fdt, env_node, env_lmac); diff --git a/board/Marvell/openrd/Kconfig b/board/Marvell/openrd/Kconfig index 124b66d..dc26ed2 100644 --- a/board/Marvell/openrd/Kconfig +++ b/board/Marvell/openrd/Kconfig @@ -1,5 +1,19 @@ if TARGET_OPENRD +choice + prompt "Board variant" + +config BOARD_IS_OPENRD_BASE + bool "Base" + +config BOARD_IS_OPENRD_CLIENT + bool "Client" + +config BOARD_IS_OPENRD_ULTIMATE + bool "Ultimate" + +endchoice + config SYS_BOARD default "openrd" diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig index 1d13f54..4aab3f0 100644 --- a/board/armltd/vexpress64/Kconfig +++ b/board/armltd/vexpress64/Kconfig @@ -7,7 +7,7 @@ config SYS_VENDOR default "armltd" config SYS_CONFIG_NAME - default "vexpress_aemv8a" + default "vexpress_aemv8" config JUNO_DTB_PART string "NOR flash partition holding DTB" diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile index 868dc4f..1878fbe 100644 --- a/board/armltd/vexpress64/Makefile +++ b/board/armltd/vexpress64/Makefile @@ -3,5 +3,5 @@ # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -obj-y := vexpress64.o +obj-y := vexpress64.o lowlevel_init.o obj-$(CONFIG_TARGET_VEXPRESS64_JUNO) += pcie.o diff --git a/board/armltd/vexpress64/lowlevel_init.S b/board/armltd/vexpress64/lowlevel_init.S new file mode 100644 index 0000000..3dcfb85 --- /dev/null +++ b/board/armltd/vexpress64/lowlevel_init.S @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2021 Arm Limited + */ + +.global save_boot_params +save_boot_params: + + adr x8, prior_stage_fdt_address + str x0, [x8] + + b save_boot_params_ret diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index d2f307c..5e22e89 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -18,6 +18,10 @@ #include <dm/platform_data/serial_pl01x.h> #include "pcie.h" #include <asm/armv8/mmu.h> +#ifdef CONFIG_VIRTIO_NET +#include <virtio_types.h> +#include <virtio.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -64,6 +68,9 @@ __weak void vexpress64_pcie_init(void) int board_init(void) { vexpress64_pcie_init(); +#ifdef CONFIG_VIRTIO_NET + virtio_init(); +#endif return 0; } @@ -85,7 +92,15 @@ int dram_init_banksize(void) return 0; } +/* Assigned in lowlevel_init.S + * Push the variable into the .data section so that it + * does not get cleared later. + */ +unsigned long __section(".data") prior_stage_fdt_address; + #ifdef CONFIG_OF_BOARD + +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO #define JUNO_FLASH_SEC_SIZE (256 * 1024) static phys_addr_t find_dtb_in_nor_flash(const char *partname) { @@ -130,9 +145,11 @@ static phys_addr_t find_dtb_in_nor_flash(const char *partname) return ~0; } +#endif void *board_fdt_blob_setup(int *err) { +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO phys_addr_t fdt_rom_addr = find_dtb_in_nor_flash(CONFIG_JUNO_DTB_PART); *err = 0; @@ -142,6 +159,22 @@ void *board_fdt_blob_setup(int *err) } return (void *)fdt_rom_addr; +#endif + +#ifdef VEXPRESS_FDT_ADDR + if (fdt_magic(VEXPRESS_FDT_ADDR) == FDT_MAGIC) { + *err = 0; + return (void *)VEXPRESS_FDT_ADDR; + } +#endif + + if (fdt_magic(prior_stage_fdt_address) == FDT_MAGIC) { + *err = 0; + return (void *)prior_stage_fdt_address; + } + + *err = -ENXIO; + return NULL; } #endif diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c index 32acf36..88036c1 100644 --- a/board/broadcom/bcmns3/ns3.c +++ b/board/broadcom/bcmns3/ns3.c @@ -150,7 +150,10 @@ int board_init(void) if (bl33_info->version != BL33_INFO_VERSION) printf("*** warning: ATF BL31 and U-Boot not in sync! ***\n"); - +#if CONFIG_IS_ENABLED(BNXT_ETH) + if (chimp_fastboot_optee() != 0) + printf("*** warning: secure chimp fastboot failed! ***\n"); +#endif return 0; } diff --git a/board/cadence/xtfpga/xtfpga.c b/board/cadence/xtfpga/xtfpga.c index c26793d..ade7f9d 100644 --- a/board/cadence/xtfpga/xtfpga.c +++ b/board/cadence/xtfpga/xtfpga.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <command.h> #include <dm.h> #include <init.h> @@ -49,7 +50,7 @@ int checkboard(void) return 0; } -int board_postclk_init(void) +unsigned long get_board_sys_clk(void) { /* * Obtain CPU clock frequency from board and cache in global @@ -58,11 +59,17 @@ int board_postclk_init(void) */ #ifdef CONFIG_SYS_FPGAREG_FREQ - gd->cpu_clk = (*(volatile unsigned long *)CONFIG_SYS_FPGAREG_FREQ); + return (*(volatile unsigned long *)CONFIG_SYS_FPGAREG_FREQ); #else /* early Tensilica bitstreams lack this reg, but most run at 50 MHz */ - gd->cpu_clk = 50000000UL; + return 50000000; #endif +} + +int board_postclk_init(void) +{ + gd->cpu_clk = get_board_sys_clk(); + return 0; } diff --git a/board/compulab/cl-som-imx7/Kconfig b/board/compulab/cl-som-imx7/Kconfig index 6d69cf3..ffd857c 100644 --- a/board/compulab/cl-som-imx7/Kconfig +++ b/board/compulab/cl-som-imx7/Kconfig @@ -17,10 +17,6 @@ config SYS_USB_DEV int default 0 -config SYS_MMC_IMG_LOAD_PART - int - default 1 - config SYS_USB_IMG_LOAD_PART int default 1 diff --git a/board/coreboot/coreboot/coreboot.c b/board/coreboot/coreboot/coreboot.c index 11294d6..3b90ae7 100644 --- a/board/coreboot/coreboot/coreboot.c +++ b/board/coreboot/coreboot/coreboot.c @@ -4,10 +4,11 @@ */ #include <common.h> -#include <asm/cb_sysinfo.h> -#include <asm/global_data.h> +#include <splash.h> #include <init.h> #include <smbios.h> +#include <asm/cb_sysinfo.h> +#include <asm/global_data.h> int board_early_init_r(void) { @@ -65,3 +66,18 @@ fallback: return checkboard(); } #endif + +static struct splash_location coreboot_splash_locations[] = { + { + .name = "virtio_fs", + .storage = SPLASH_STORAGE_VIRTIO, + .flags = SPLASH_STORAGE_RAW, + .devpart = "0", + }, +}; + +int splash_screen_prepare(void) +{ + return splash_source_load(coreboot_splash_locations, + ARRAY_SIZE(coreboot_splash_locations)); +} diff --git a/board/emulation/qemu-riscv/Kconfig b/board/emulation/qemu-riscv/Kconfig index 1bbf1bc..a380db6 100644 --- a/board/emulation/qemu-riscv/Kconfig +++ b/board/emulation/qemu-riscv/Kconfig @@ -65,5 +65,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply VIRTIO_BLK imply MTD_NOR_FLASH imply CFI_FLASH + imply OF_HAS_PRIOR_STAGE endif diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig index 69620db..300b01e 100644 --- a/board/freescale/common/Kconfig +++ b/board/freescale/common/Kconfig @@ -28,36 +28,67 @@ config FSL_USE_PCA9547_MUX This option enables the PCA9547 I2C mux on Freescale boards. config VID - depends on DM_I2C bool "Enable Freescale VID" + depends on I2C || DM_I2C help This option enables setting core voltage based on individual values saved in SoC fuses. +config SPL_VID + bool "Enable Freescale VID in SPL" + depends on I2C || DM_I2C + help + This option enables setting core voltage based on individual + values saved in SoC fuses, in SPL. + +if VID || SPL_VID + +config VID_FLS_ENV + string "Environment variable for overriding VDD" + help + This option allows for specifying the environment variable + to check to override VDD information. + +config VOL_MONITOR_INA220 + bool "Enable the INA220 voltage monitor read" + help + This option enables INA220 voltage monitor read + functionality. It is used by the common VID driver. + +config VOL_MONITOR_IR36021_READ + bool "Enable the IR36021 voltage monitor read" + help + This option enables IR36021 voltage monitor read + functionality. It is used by the common VID driver. + +config VOL_MONITOR_IR36021_SET + bool "Enable the IR36021 voltage monitor set" + help + This option enables IR36021 voltage monitor set + functionality. It is used by the common VID driver. + config VOL_MONITOR_LTC3882_READ - depends on VID bool "Enable the LTC3882 voltage monitor read" help This option enables LTC3882 voltage monitor read functionality. It is used by the common VID driver. config VOL_MONITOR_LTC3882_SET - depends on VID bool "Enable the LTC3882 voltage monitor set" help This option enables LTC3882 voltage monitor set functionality. It is used by the common VID driver. config VOL_MONITOR_ISL68233_READ - depends on VID bool "Enable the ISL68233 voltage monitor read" help This option enables ISL68233 voltage monitor read functionality. It is used by the common VID driver. config VOL_MONITOR_ISL68233_SET - depends on VID bool "Enable the ISL68233 voltage monitor set" help This option enables ISL68233 voltage monitor set functionality. It is used by the common VID driver. + +endif diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 3a17168..0ddfb59 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -33,7 +33,7 @@ obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o endif obj-$(I2C_COMMON) += i2c_common.o obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o -obj-$(CONFIG_VID) += vid.o +obj-$(CONFIG_$(SPL_)VID) += vid.o obj-$(CONFIG_FSL_QIXIS) += qixis.o obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o ifndef CONFIG_SPL_BUILD diff --git a/board/freescale/common/cadmus.c b/board/freescale/common/cadmus.c index 7e7394f..8f3fb5f 100644 --- a/board/freescale/common/cadmus.c +++ b/board/freescale/common/cadmus.c @@ -5,7 +5,7 @@ #include <common.h> - +#include <clock_legacy.h> /* * CADMUS Board System Registers @@ -37,7 +37,7 @@ get_board_version(void) unsigned long -get_clock_freq(void) +get_board_sys_clk(void) { volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG; diff --git a/board/freescale/common/cadmus.h b/board/freescale/common/cadmus.h index ddc2bb6..fb74e8f 100644 --- a/board/freescale/common/cadmus.h +++ b/board/freescale/common/cadmus.h @@ -19,7 +19,7 @@ extern unsigned int get_board_version(void); /* * Returns either 33000000 or 66000000 as the SYS_CLK_FREQ. */ -extern unsigned long get_clock_freq(void); +extern unsigned long get_board_sys_clk(void); /* diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c index 2143395..01662d3 100644 --- a/board/freescale/common/ics307_clk.c +++ b/board/freescale/common/ics307_clk.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <log.h> #include <asm/io.h> @@ -137,6 +138,7 @@ unsigned long get_board_sys_clk(void) in_8(&fpga_reg->sclk[2])); } +#ifdef CONFIG_DYNAMIC_DDR_CLK_FREQ unsigned long get_board_ddr_clk(void) { return ics307_clk_freq( @@ -144,3 +146,4 @@ unsigned long get_board_ddr_clk(void) in_8(&fpga_reg->dclk[1]), in_8(&fpga_reg->dclk[2])); } +#endif diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index fbbd27d..0647622 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -102,6 +102,7 @@ int checkboard(void) return 0; } +#ifdef CONFIG_DYNAMIC_SYS_CLK_FREQ unsigned long get_board_sys_clk(void) { u8 sysclk_conf = QIXIS_READ(brdcfg[1]); @@ -126,6 +127,7 @@ unsigned long get_board_sys_clk(void) } return 66666666; } +#endif #ifdef CONFIG_DYNAMIC_DDR_CLK_FREQ unsigned long get_board_ddr_clk(void) diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index 2d53224..13359f9 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <i2c.h> #include <fdt_support.h> #include <fsl_ddr_sdram.h> diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index cc95d44..8481c45 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <i2c.h> #include <fdt_support.h> #include <fsl_ddr_sdram.h> diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index 7046fba..aa548b2 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -3,6 +3,7 @@ * Copyright 2017-2018 NXP */ #include <common.h> +#include <clock_legacy.h> #include <env.h> #include <i2c.h> #include <init.h> @@ -374,6 +375,7 @@ bool if_board_diff_clk(void) #endif } +#ifdef CONFIG_DYNAMIC_SYS_CLK_FREQ unsigned long get_board_sys_clk(void) { u8 sysclk_conf = QIXIS_READ(brdcfg[1]); @@ -397,7 +399,9 @@ unsigned long get_board_sys_clk(void) return 66666666; } +#endif +#ifdef CONFIG_DYNAMIC_DDR_CLK_FREQ unsigned long get_board_ddr_clk(void) { u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); @@ -415,6 +419,7 @@ unsigned long get_board_ddr_clk(void) return 66666666; } +#endif #if !defined(CONFIG_SPL_BUILD) void board_retimer_init(void) diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index 2f0139e..297629d 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -3,6 +3,7 @@ * Copyright 2015 Freescale Semiconductor */ #include <common.h> +#include <clock_legacy.h> #include <env.h> #include <init.h> #include <malloc.h> diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index bf660a8..1975b0f 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -4,6 +4,7 @@ * Copyright 2017 NXP */ #include <common.h> +#include <clock_legacy.h> #include <env.h> #include <init.h> #include <malloc.h> diff --git a/board/freescale/lx2160a/eth_lx2160aqds.c b/board/freescale/lx2160a/eth_lx2160aqds.c index a2b6442..1819b27 100644 --- a/board/freescale/lx2160a/eth_lx2160aqds.c +++ b/board/freescale/lx2160a/eth_lx2160aqds.c @@ -775,10 +775,11 @@ int fdt_fixup_board_phy(void *fdt) int fpga_offset, offset, subnodeoffset; struct mii_dev *mii_dev; struct list_head *mii_devs, *entry; - int ret, dpmac_id, phandle, i; + int ret, dpmac_id, i; struct phy_device *phy_dev; char ethname[ETH_NAME_LEN]; phy_interface_t phy_iface; + uint32_t phandle; ret = 0; /* we know FPGA is connected to i2c0, therefore search path directly, @@ -794,7 +795,10 @@ int fdt_fixup_board_phy(void *fdt) return fpga_offset; } - phandle = fdt_alloc_phandle(fdt); + ret = fdt_generate_phandle(fdt, &phandle); + if (ret < 0) + return ret; + mii_devs = mdio_get_list_head(); list_for_each(entry, mii_devs) { diff --git a/board/freescale/lx2160a/eth_lx2162aqds.c b/board/freescale/lx2160a/eth_lx2162aqds.c index 3b04dea..ac6218e 100644 --- a/board/freescale/lx2160a/eth_lx2162aqds.c +++ b/board/freescale/lx2160a/eth_lx2162aqds.c @@ -787,10 +787,11 @@ int fdt_fixup_board_phy(void *fdt) int fpga_offset, offset, subnodeoffset; struct mii_dev *mii_dev; struct list_head *mii_devs, *entry; - int ret, dpmac_id, phandle, i; + int ret, dpmac_id, i; struct phy_device *phy_dev; char ethname[ETH_NAME_LEN]; phy_interface_t phy_iface; + uint32_t phandle; ret = 0; /* we know FPGA is connected to i2c0, therefore search path directly, @@ -806,7 +807,10 @@ int fdt_fixup_board_phy(void *fdt) return fpga_offset; } - phandle = fdt_alloc_phandle(fdt); + ret = fdt_generate_phandle(fdt, &phandle); + if (ret < 0) + return ret; + mii_devs = mdio_get_list_head(); list_for_each(entry, mii_devs) { diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c index 6c84eef..7eaa204 100644 --- a/board/freescale/p1010rdb/spl.c +++ b/board/freescale/p1010rdb/spl.c @@ -43,7 +43,7 @@ void board_init_f(ulong bootflag) /* initialize selected port with appropriate baud rate */ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + gd->bus_clk = get_board_sys_clk() * plat_ratio; ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1, gd->bus_clk / 16 / CONFIG_BAUDRATE); diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c index 989c5b1..a956c5a 100644 --- a/board/freescale/p1010rdb/spl_minimal.c +++ b/board/freescale/p1010rdb/spl_minimal.c @@ -3,6 +3,7 @@ * Copyright 2011 Freescale Semiconductor, Inc. */ #include <common.h> +#include <clock_legacy.h> #include <init.h> #include <mpc85xx.h> #include <asm/io.h> @@ -29,7 +30,7 @@ void board_init_f(ulong bootflag) /* initialize selected port with appropriate baud rate */ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + gd->bus_clk = get_board_sys_clk() * plat_ratio; ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1, gd->bus_clk / 16 / CONFIG_BAUDRATE); diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c index 1184684..f855f3a 100644 --- a/board/freescale/p1_p2_rdb_pc/spl.c +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -48,7 +48,7 @@ void board_init_f(ulong bootflag) /* initialize selected port with appropriate baud rate */ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; plat_ratio >>= 1; - bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + bus_clk = get_board_sys_clk() * plat_ratio; gd->bus_clk = bus_clk; ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1, diff --git a/board/freescale/p1_p2_rdb_pc/spl_minimal.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c index eb3f2c8..72beead 100644 --- a/board/freescale/p1_p2_rdb_pc/spl_minimal.c +++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <init.h> #include <ns16550.h> #include <asm/io.h> @@ -28,7 +29,7 @@ void board_init_f(ulong bootflag) /* initialize selected port with appropriate baud rate */ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + gd->bus_clk = get_board_sys_clk() * plat_ratio; ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1, gd->bus_clk / 16 / CONFIG_BAUDRATE); diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 4ece1e6..5bd2b99 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <command.h> #include <env.h> #include <fdt_support.h> @@ -148,7 +149,7 @@ int board_early_init_r(void) return 0; } -unsigned long get_board_sys_clk(unsigned long dummy) +unsigned long get_board_sys_clk(void) { u8 sysclk_conf = CPLD_READ(sysclk_sw1); diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c index ac373d7..af15da5 100644 --- a/board/freescale/t102xrdb/spl.c +++ b/board/freescale/t102xrdb/spl.c @@ -25,11 +25,6 @@ phys_size_t get_effective_memsize(void) return CONFIG_SYS_L3_SIZE; } -unsigned long get_board_sys_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - #if defined(CONFIG_SPL_MMC_BOOT) #define GPIO1_SD_SEL 0x00020000 int board_mmc_getcd(struct mmc *mmc) diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index ab7675e..539a5c7 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -162,11 +162,6 @@ int board_early_init_r(void) return 0; } -unsigned long get_board_sys_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - #ifdef CONFIG_TARGET_T1024RDB void board_reset(void) { diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c index c7df111..dfaff1a 100644 --- a/board/freescale/t104xrdb/spl.c +++ b/board/freescale/t104xrdb/spl.c @@ -25,11 +25,6 @@ phys_size_t get_effective_memsize(void) return CONFIG_SYS_L3_SIZE; } -unsigned long get_board_sys_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - #define FSL_CORENET_CCSR_PORSR1_RCW_MASK 0xFF800000 void board_init_f(ulong bootflag) { diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c index e54672a..1da3a71 100644 --- a/board/freescale/t208xqds/t208xqds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <command.h> #include <env.h> #include <fdt_support.h> diff --git a/board/freescale/t208xrdb/spl.c b/board/freescale/t208xrdb/spl.c index 2204a98..60fe084 100644 --- a/board/freescale/t208xrdb/spl.c +++ b/board/freescale/t208xrdb/spl.c @@ -24,11 +24,6 @@ phys_size_t get_effective_memsize(void) return CONFIG_SYS_L3_SIZE; } -unsigned long get_board_sys_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - void board_init_f(ulong bootflag) { u32 plat_ratio, sys_clk, ccb_clk; diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c index 3611dbb..1c8017b 100644 --- a/board/freescale/t208xrdb/t208xrdb.c +++ b/board/freescale/t208xrdb/t208xrdb.c @@ -109,11 +109,6 @@ int board_early_init_r(void) return 0; } -unsigned long get_board_sys_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - int misc_init_r(void) { u8 reg; diff --git a/board/freescale/t4rdb/spl.c b/board/freescale/t4rdb/spl.c index 69d1449..c7d5de3 100644 --- a/board/freescale/t4rdb/spl.c +++ b/board/freescale/t4rdb/spl.c @@ -30,11 +30,6 @@ phys_size_t get_effective_memsize(void) return CONFIG_SYS_L3_SIZE; } -unsigned long get_board_sys_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - void board_init_f(ulong bootflag) { u32 plat_ratio, sys_clk, ccb_clk; diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 2be921f..7ec931c 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -1681,8 +1681,7 @@ void ft_early_fixup(void *blob, int board_type) * disable serial2 node for GW54xx for compatibility with older * 3.10.x kernel that improperly had this node enabled in the DT */ - fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED, - 0); + fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED); /* GW54xx-E adds WDOG2_B external reset */ if (rev < 'E') diff --git a/board/keymile/kmcent2/kmcent2.c b/board/keymile/kmcent2/kmcent2.c index 4f5164e..ca24b96 100644 --- a/board/keymile/kmcent2/kmcent2.c +++ b/board/keymile/kmcent2/kmcent2.c @@ -181,11 +181,6 @@ unsigned long get_serial_clock(unsigned long dummy) return (gd->bus_clk / 2); } -unsigned long get_board_sys_clk(unsigned long dummy) -{ - return 66666666; -} - int misc_init_f(void) { /* configure QRIO pis for i2c deblocking */ diff --git a/board/kontron/sl28/sl28.c b/board/kontron/sl28/sl28.c index c8ed7ac..e84b356 100644 --- a/board/kontron/sl28/sl28.c +++ b/board/kontron/sl28/sl28.c @@ -75,7 +75,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) if (CONFIG_IS_ENABLED(SL28_SPL_LOADS_OPTEE_BL32)) { node = fdt_node_offset_by_compatible(blob, -1, "linaro,optee-tz"); if (node) - fdt_set_node_status(blob, node, FDT_STATUS_OKAY, 0); + fdt_set_node_status(blob, node, FDT_STATUS_OKAY); } return 0; diff --git a/board/liebherr/display5/spl.c b/board/liebherr/display5/spl.c index d5fe336..5c1af1a 100644 --- a/board/liebherr/display5/spl.c +++ b/board/liebherr/display5/spl.c @@ -327,8 +327,10 @@ void board_init_f(ulong dummy) displ5_set_iomux_misc_spl(); /* Initialize and reset WDT in SPL */ +#ifdef CONFIG_SPL_WATCHDOG hw_watchdog_init(); WATCHDOG_RESET(); +#endif /* load/boot image from boot device */ board_init_r(NULL, 0); diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index ff69607..17b8108 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -510,7 +510,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) node = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer"); if (node < 0) - lcd_dt_simplefb_add_node(blob); + fdt_simplefb_add_node(blob); #ifdef CONFIG_EFI_LOADER /* Reserve the spin table */ diff --git a/board/renesas/eagle/eagle.c b/board/renesas/eagle/eagle.c index 3417b50..9af935c 100644 --- a/board/renesas/eagle/eagle.c +++ b/board/renesas/eagle/eagle.c @@ -7,6 +7,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <cpu_func.h> #include <hang.h> #include <init.h> @@ -50,7 +51,7 @@ void s_init(void) writel(0xA5A5A500, &swdt->swtcsra); /* CPU frequency setting. Set to 0.8GHz */ - stc = ((800 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_OFFSET; + stc = ((800 / CLK2MHZ(get_board_sys_clk())) - 1) << PLL0_STC_OFFSET; clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); } diff --git a/board/renesas/gose/gose.c b/board/renesas/gose/gose.c index 51768c3..6197e54 100644 --- a/board/renesas/gose/gose.c +++ b/board/renesas/gose/gose.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <cpu_func.h> #include <env.h> #include <hang.h> @@ -45,7 +46,7 @@ void s_init(void) writel(0xA5A5A500, &swdt->swtcsra); /* CPU frequency setting. Set to 1.5GHz */ - stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT; + stc = ((1500 / CLK2MHZ(get_board_sys_clk())) - 1) << PLL0_STC_BIT; clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); /* QoS */ diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c index 7e94bd8..87607df 100644 --- a/board/renesas/koelsch/koelsch.c +++ b/board/renesas/koelsch/koelsch.c @@ -7,6 +7,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <cpu_func.h> #include <env.h> #include <hang.h> @@ -47,7 +48,7 @@ void s_init(void) writel(0xA5A5A500, &swdt->swtcsra); /* CPU frequency setting. Set to 1.5GHz */ - stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT; + stc = ((1500 / CLK2MHZ(get_board_sys_clk())) - 1) << PLL0_STC_BIT; clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); /* QoS */ diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c index 87c5e01..8e24ac0 100644 --- a/board/renesas/lager/lager.c +++ b/board/renesas/lager/lager.c @@ -8,6 +8,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <cpu_func.h> #include <env.h> #include <env_internal.h> @@ -50,7 +51,7 @@ void s_init(void) /* CPU frequency setting. Set to 1.4GHz */ if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X) { u32 stat = 0; - u32 stc = ((1400 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) + u32 stc = ((1400 / CLK2MHZ(get_board_sys_clk())) - 1) << PLL0_STC_BIT; clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); diff --git a/board/renesas/porter/porter.c b/board/renesas/porter/porter.c index b0f8505..1a3a4c1 100644 --- a/board/renesas/porter/porter.c +++ b/board/renesas/porter/porter.c @@ -7,6 +7,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <cpu_func.h> #include <env.h> #include <hang.h> @@ -47,7 +48,7 @@ void s_init(void) writel(0xA5A5A500, &swdt->swtcsra); /* CPU frequency setting. Set to 1.5GHz */ - stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT; + stc = ((1500 / CLK2MHZ(get_board_sys_clk())) - 1) << PLL0_STC_BIT; clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); /* QoS */ diff --git a/board/renesas/stout/stout.c b/board/renesas/stout/stout.c index 3fdf936..56bdb34 100644 --- a/board/renesas/stout/stout.c +++ b/board/renesas/stout/stout.c @@ -9,6 +9,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <env.h> #include <init.h> #include <malloc.h> @@ -50,7 +51,7 @@ void s_init(void) /* CPU frequency setting. Set to 1.4GHz */ if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X) { u32 stat = 0; - u32 stc = ((1400 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) + u32 stc = ((1400 / CLK2MHZ(get_board_sys_clk())) - 1) << PLL0_STC_BIT; clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); diff --git a/board/sandbox/sandbox.env b/board/sandbox/sandbox.env new file mode 100644 index 0000000..b4c0463 --- /dev/null +++ b/board/sandbox/sandbox.env @@ -0,0 +1,25 @@ +stdin=serial +#ifdef CONFIG_SANDBOX_SDL +stdin+=,cros-ec-keyb,usbkbd +#endif +stdout=serial,vidconsole +stderr=serial,vidconsole + +ethaddr=02:00:11:22:33:44 +eth2addr=02:00:11:22:33:48 +eth3addr=02:00:11:22:33:45 +eth4addr=02:00:11:22:33:48 +eth5addr=02:00:11:22:33:46 +eth6addr=02:00:11:22:33:47 +ipaddr=192.0.2.1 + +/* + * These are used for distro boot which is not supported. But once bootmethod + * is provided these will be used again. + */ +bootm_size=0x10000000 +kernel_addr_r=0x1000000 +fdt_addr_r=0xc00000 +ramdisk_addr_r=0x2000000 +scriptaddr=0x1000 +pxefile_addr_r=0x2000 diff --git a/board/siemens/capricorn/MAINTAINERS b/board/siemens/capricorn/MAINTAINERS index bc7d163..b4c5203 100644 --- a/board/siemens/capricorn/MAINTAINERS +++ b/board/siemens/capricorn/MAINTAINERS @@ -5,7 +5,6 @@ F: board/siemens/capricorn/ F: include/configs/capricorn-common.h F: include/configs/deneb.h F: include/configs/giedi.h -F: include/configs/siemens-ccp-common.h F: include/configs/siemens-env-common.h F: configs/deneb_defconfig F: configs/giedi_defconfig diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index a81cb7b..f6a3cc1 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -57,7 +57,7 @@ int checkboard (void) /* Check the PCI_clk sel bit */ if (in_be32(&gur->porpllsr) & (1<<15)) { src = "SYSCLK"; - f = CONFIG_SYS_CLK_FREQ; + f = get_board_sys_clk(); } else { src = "PCI_CLK"; f = CONFIG_PCI_CLK_FREQ; diff --git a/board/st/common/stm32mp_dfu.c b/board/st/common/stm32mp_dfu.c index 00d1fb8..a3f0da5 100644 --- a/board/st/common/stm32mp_dfu.c +++ b/board/st/common/stm32mp_dfu.c @@ -132,6 +132,10 @@ void set_dfu_alt_info(char *interface, char *devstr) mtd = get_mtd_device_nm("nor0"); if (!IS_ERR_OR_NULL(mtd)) board_get_alt_info_mtd(mtd, buf); + + mtd = get_mtd_device_nm("nor1"); + if (!IS_ERR_OR_NULL(mtd)) + board_get_alt_info_mtd(mtd, buf); } mtd = get_mtd_device_nm("nand0"); diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 8459267..45f2ca8 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -13,6 +13,7 @@ #include <dm.h> #include <env.h> #include <env_internal.h> +#include <fdt_simplefb.h> #include <fdt_support.h> #include <g_dnl.h> #include <generic-phy.h> @@ -914,6 +915,9 @@ int ft_board_setup(void *blob, struct bd_info *bd) if (IS_ENABLED(CONFIG_FDT_FIXUP_PARTITIONS)) fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); + if (CONFIG_IS_ENABLED(FDT_SIMPLEFB)) + fdt_simplefb_enable_and_mem_rsv(blob); + return 0; } #endif diff --git a/board/sunxi/board.c b/board/sunxi/board.c index fdbcd40..2790a0f 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -11,6 +11,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <dm.h> #include <env.h> #include <hang.h> @@ -667,7 +668,7 @@ void sunxi_board_init(void) * assured it's being powered with suitable core voltage */ if (!power_failed) - clock_set_pll1(CONFIG_SYS_CLK_FREQ); + clock_set_pll1(get_board_sys_clk()); else printf("Failed to set core voltage! Can't set CPU frequency\n"); } diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c index bb2d514..6e41ca2 100644 --- a/board/theadorable/theadorable.c +++ b/board/theadorable/theadorable.c @@ -298,10 +298,19 @@ int board_late_init(void) bootcount_inc(); if (bootcount > PEX_SWITCH_NOT_FOUNT_LIMIT) { - printf("Issuing power-switch via uC!\n"); + struct udevice *dev; printf("Issuing power-switch via uC!\n"); - i2c_set_bus_num(STM_I2C_BUS); + ret = i2c_get_chip_for_busnum(STM_I2C_BUS, STM_I2C_ADDR, + 1, &dev); + if (ret) { + printf("Error selecting STM on I2C bus (ret=%d)\n", + ret); + printf("Issuing soft-reset...\n"); + /* default handling: SOFT reset */ + do_reset(NULL, 0, 0, NULL); + } + i2c_buf[0] = STM_I2C_ADDR << 1; i2c_buf[1] = 0xc5; /* cmd */ i2c_buf[2] = 0x01; /* enable */ @@ -313,7 +322,7 @@ int board_late_init(void) i2c_buf[6] = 0x00; i2c_buf[7] = crc8(0x72, &i2c_buf[0], 7); - ret = i2c_write(STM_I2C_ADDR, 0, 0, &i2c_buf[1], 7); + ret = dm_i2c_write(dev, 0, &i2c_buf[1], 7); if (ret) { printf("I2C write error (ret=%d)\n", ret); printf("Issuing soft-reset...\n"); diff --git a/board/warp7/Kconfig b/board/warp7/Kconfig index e5051cd..05b4420 100644 --- a/board/warp7/Kconfig +++ b/board/warp7/Kconfig @@ -14,12 +14,6 @@ config WARP7_ROOT_PART partition that is typically specified with root=/dev/sdaX or which gets converted into a root=PARTUUID=some_uuid. -config SYS_FDT_ADDR - hex "FDT load address" - default 0x83000000 - help - The address the FDT file should be loaded to. - config IMX_CONFIG default "board/warp7/imximage.cfg" diff --git a/board/xen/xenguest_arm64/Kconfig b/board/xen/xenguest_arm64/Kconfig index cc131ed..4d8aa35 100644 --- a/board/xen/xenguest_arm64/Kconfig +++ b/board/xen/xenguest_arm64/Kconfig @@ -9,4 +9,7 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "xenguest_arm64" +config LNX_KRNL_IMG_TEXT_OFFSET_BASE + default SYS_LOAD_ADDR + endif diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index 4932030..0028219 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -3,7 +3,6 @@ # (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -obj-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o obj-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o obj-$(CONFIG_ARCH_P2020) += fsl_8xxx_clk.o obj-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o diff --git a/board/xes/common/fsl_8xxx_clk.c b/board/xes/common/fsl_8xxx_clk.c index 8ca65ca..20e88d4 100644 --- a/board/xes/common/fsl_8xxx_clk.c +++ b/board/xes/common/fsl_8xxx_clk.c @@ -4,12 +4,13 @@ */ #include <common.h> +#include <clock_legacy.h> #include <asm/io.h> /* * Return SYSCLK input frequency - 50 MHz or 66 MHz depending on POR config */ -unsigned long get_board_sys_clk(ulong dummy) +unsigned long get_board_sys_clk(void) { #if defined(CONFIG_MPC85xx) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -33,13 +34,13 @@ unsigned long get_board_sys_clk(ulong dummy) * Return DDR input clock - synchronous with SYSCLK or 66 MHz * Note: 86xx doesn't support asynchronous DDR clk */ -unsigned long get_board_ddr_clk(ulong dummy) +unsigned long get_board_ddr_clk(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u32 ddr_ratio = (in_be32(&gur->porpllsr) & 0x00003e00) >> 9; if (ddr_ratio == 0x7) - return get_board_sys_clk(dummy); + return get_board_sys_clk(); #ifdef CONFIG_ARCH_P2020 if (in_be32(&gur->gpporcr) & 0x20000) diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c deleted file mode 100644 index c1fce7d..0000000 --- a/board/xes/common/fsl_8xxx_pci.c +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2007-2008 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <init.h> -#include <pci.h> -#include <asm/fsl_pci.h> -#include <asm/fsl_serdes.h> -#include <asm/io.h> -#include <linux/compiler.h> -#include <linux/libfdt.h> -#include <fdt_support.h> - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_pci_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/boot/Kconfig b/boot/Kconfig index d3a12be..f1ce576 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -358,11 +358,27 @@ config SYS_TEXT_BASE help The address in memory that U-Boot will be running from, initially. +config DYNAMIC_SYS_CLK_FREQ + bool "Determine CPU clock frequency at run-time" + help + Implement a get_board_sys_clk function that will determine the CPU + clock frequency at run time, rather than define it statically. + config SYS_CLK_FREQ - depends on ARC || ARCH_SUNXI || MPC83xx + depends on !DYNAMIC_SYS_CLK_FREQ int "CPU clock frequency" + default 125000000 if ARCH_LS1012A + default 100000000 if ARCH_P2020 || ARCH_T1024 || ARCH_T1042 || \ + ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 + default 66666666 if ARCH_P1010 || ARCH_P1020 || ARCH_T4240 + default 66660000 if ARCH_T2080 + default 33333333 if RCAR_GEN3 + default 24000000 if ARCH_EXYNOS + default 20000000 if RCAR_GEN2 + default 0 help - TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture + A static value for the CPU frequency. Note that if not required + for a given SoC, this can be left at 0. config ARCH_FIXUP_FDT_MEMORY bool "Enable arch_fixup_memory_banks() call" @@ -762,6 +778,13 @@ config SD_BOOT booted via SD/EMMC. This is not a must, some SoCs need this, some not. +config SD_BOOT_QSPI + bool "Support for booting from SD/EMMC and enable QSPI" + help + Enabling this will make a U-Boot binary that is capable of being + booted via SD/EMMC while enabling QSPI on the platform as well. This + is not a must, some SoCs need this, some not. + config SPI_BOOT bool "Support for booting from SPI flash" help diff --git a/boot/bootm_os.c b/boot/bootm_os.c index e635c72..f31820c 100644 --- a/boot/bootm_os.c +++ b/boot/bootm_os.c @@ -26,12 +26,9 @@ DECLARE_GLOBAL_DATA_PTR; static int do_bootm_standalone(int flag, int argc, char *const argv[], bootm_headers_t *images) { - char *s; int (*appl)(int, char *const[]); - /* Don't start if "autostart" is set to "no" */ - s = env_get("autostart"); - if ((s != NULL) && !strcmp(s, "no")) { + if (!env_get_autostart()) { env_set_hex("filesize", images->os.image_len); return 0; } diff --git a/boot/fdt_region.c b/boot/fdt_region.c index e4ef0ca..bac5559 100644 --- a/boot/fdt_region.c +++ b/boot/fdt_region.c @@ -185,6 +185,8 @@ static int fdt_add_region(struct fdt_region_state *info, int offset, int size) reg++; reg->offset = offset; reg->size = size; + if (!(offset - fdt_off_dt_struct(info->fdt))) + info->have_node = true; } } else { return -1; @@ -342,13 +344,19 @@ static int fdt_include_supernodes(struct fdt_region_state *info, int depth) return 0; } +/* + * Tracks the progress through the device tree. Everything fdt_next_region() is + * called it picks up at the same state as last time, looks at info->start and + * decides what region to add next + */ enum { - FDT_DONE_NOTHING, - FDT_DONE_MEM_RSVMAP, - FDT_DONE_STRUCT, - FDT_DONE_END, - FDT_DONE_STRINGS, - FDT_DONE_ALL, + FDT_DONE_NOTHING, /* Starting */ + FDT_DONE_MEM_RSVMAP, /* Completed mem_rsvmap region */ + FDT_DONE_STRUCT, /* Completed struct region */ + FDT_DONE_EMPTY, /* Completed checking for empty struct region */ + FDT_DONE_END, /* Completed the FDT_END tag */ + FDT_DONE_STRINGS, /* Completed the strings */ + FDT_DONE_ALL, /* All done */ }; int fdt_first_region(const void *fdt, @@ -365,6 +373,7 @@ int fdt_first_region(const void *fdt, info->can_merge = 1; info->max_regions = 1; info->start = -1; + info->have_node = false; p->want = WANT_NOTHING; p->end = path; *p->end = '\0'; @@ -633,6 +642,8 @@ int fdt_next_region(const void *fdt, * region. */ if (!include && info->start != -1) { + if (!info->start) + info->have_node = true; if (fdt_add_region(info, base + info->start, stop_at - info->start)) return 0; @@ -644,11 +655,31 @@ int fdt_next_region(const void *fdt, info->ptrs = p; } + if (info->ptrs.done < FDT_DONE_EMPTY) { + /* + * Handle a special case where no nodes have been written. Write + * the first { so we have at least something, since + * FDT_REG_SUPERNODES means that a valid tree is required. A + * tree with no nodes is not valid + */ + if ((flags & FDT_REG_SUPERNODES) && !info->have_node && + info->start) { + /* Output the FDT_BEGIN_NODE and the empty name */ + if (fdt_add_region(info, base, 8)) + return 0; + } + info->ptrs.done++; + } + /* Add a region for the END tag and a separate one for string table */ if (info->ptrs.done < FDT_DONE_END) { if (info->ptrs.nextoffset != fdt_size_dt_struct(fdt)) return -FDT_ERR_BADSTRUCTURE; + /* Output the } before the end tag to finish it off */ + if (info->start == fdt_size_dt_struct(fdt) - 4) + info->start -= 4; + if (fdt_add_region(info, base + info->start, info->ptrs.nextoffset - info->start)) return 0; diff --git a/boot/image-fit.c b/boot/image-fit.c index 33b4a46..b629339 100644 --- a/boot/image-fit.c +++ b/boot/image-fit.c @@ -1202,7 +1202,7 @@ int fit_set_timestamp(void *fit, int noffset, time_t timestamp) * calculate_hash - calculate and return hash for provided input data * @data: pointer to the input data * @data_len: data length - * @algo: requested hash algorithm + * @name: requested hash algorithm name * @value: pointer to the char, will hold hash value data (caller must * allocate enough free space) * value_len: length of the calculated hash @@ -1230,7 +1230,7 @@ int calculate_hash(const void *data, int data_len, const char *name, return -1; } - hash_algo = hash_algo_lookup_by_name(algo); + hash_algo = hash_algo_lookup_by_name(name); if (hash_algo == HASH_ALGO_INVALID) { debug("Unsupported hash algorithm\n"); return -1; diff --git a/boot/pxe_utils.c b/boot/pxe_utils.c index a7a84f2..a32acca 100644 --- a/boot/pxe_utils.c +++ b/boot/pxe_utils.c @@ -550,7 +550,10 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label) * Scenario 2: If there is an fdt_addr specified, pass it along to * bootm, and adjust argc appropriately. * - * Scenario 3: fdt blob is not available. + * Scenario 3: If there is an fdtcontroladdr specified, pass it along to + * bootm, and adjust argc appropriately. + * + * Scenario 4: fdt blob is not available. */ bootm_argv[3] = env_get("fdt_addr_r"); @@ -652,6 +655,9 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label) if (!bootm_argv[3]) bootm_argv[3] = env_get("fdt_addr"); + if (!bootm_argv[3]) + bootm_argv[3] = env_get("fdtcontroladdr"); + if (bootm_argv[3]) { if (!bootm_argv[2]) bootm_argv[2] = "-"; diff --git a/cmd/Kconfig b/cmd/Kconfig index 02c298f..d70dbd4 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -741,7 +741,7 @@ endif config SYS_MEMTEST_START hex "default start address for mtest" - default 0 + default 0x0 help This is the default start address for mtest for simple read/write test. If no arguments are given to mtest, default address is used @@ -2226,6 +2226,27 @@ config CMD_JFFS2 provide the ability to load files, list directories and obtain filesystem information. +config JFFS2_DEV + string "Default device for JFFS2" + depends on CMD_JFFS2 + default "nor0" + help + The default device to use with the jffs2 command. + +config JFFS2_PART_OFFSET + hex "Default offset within flash to locate the JFFS2 image" + depends on CMD_JFFS2 + default 0x0 + help + The default offset within flash to locate the JFFS2 image. + +config JFFS2_PART_SIZE + hex "Default size of JFFS2 partition" + depends on CMD_JFFS2 + default 0xFFFFFFFF + help + The default size of the JFFS2 partition + config CMD_MTDPARTS bool "MTD partition support" depends on MTD @@ -2357,6 +2378,8 @@ config CMD_LOG config CMD_TRACE bool "trace - Support tracing of function calls and timing" + depends on TRACE + default y help Enables a command to control using of function tracing within U-Boot. This allows recording of call traces including timing diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index bf63cc6..c56b3f4 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -128,6 +128,8 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) lmb_init_and_reserve(&lmb, gd->bd, (void *)gd->fdt_blob); lmb_dump_all_force(&lmb); + if (IS_ENABLED(CONFIG_OF_REAL)) + printf("devicetree = %s\n", fdtdec_get_srcname()); } arch_print_bdinfo(); diff --git a/cmd/bootm.c b/cmd/bootm.c index 92468d0..b82a872 100644 --- a/cmd/bootm.c +++ b/cmd/bootm.c @@ -140,9 +140,7 @@ int do_bootm(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) int bootm_maybe_autostart(struct cmd_tbl *cmdtp, const char *cmd) { - const char *ep = env_get("autostart"); - - if (ep && !strcmp(ep, "yes")) { + if (env_get_autostart()) { char *local_args[2]; local_args[0] = (char *)cmd; local_args[1] = NULL; @@ -41,7 +41,6 @@ int do_bootelf(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) unsigned long addr; /* Address of the ELF image */ unsigned long rc; /* Return value from user code */ char *sload = NULL; - const char *ep = env_get("autostart"); int rcode = 0; /* Consume 'bootelf' */ @@ -69,7 +68,7 @@ int do_bootelf(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) else addr = load_elf_image_shdr(addr); - if (ep && !strcmp(ep, "no")) + if (!env_get_autostart()) return rcode; printf("## Starting application at 0x%08lx ...\n", addr); @@ -78,7 +78,7 @@ static int do_host_info(struct cmd_tbl *cmdtp, int flag, int argc, if (argc < 1 || argc > 2) return CMD_RET_USAGE; int min_dev = 0; - int max_dev = CONFIG_HOST_MAX_DEVICES - 1; + int max_dev = SANDBOX_HOST_MAX_DEVICES - 1; if (argc >= 2) { char *ep; char *dev_str = argv[1]; diff --git a/cmd/jffs2.c b/cmd/jffs2.c index 63bd552..6f15b57 100644 --- a/cmd/jffs2.c +++ b/cmd/jffs2.c @@ -360,11 +360,7 @@ int mtdparts_init(void) /* id */ id->mtd_id = "single part"; -#if defined(CONFIG_JFFS2_DEV) dev_name = CONFIG_JFFS2_DEV; -#else - dev_name = "nor0"; -#endif if ((mtd_id_parse(dev_name, NULL, &id->type, &id->num) != 0) || (mtd_device_validate(id->type, id->num, &size) != 0)) { @@ -382,17 +378,9 @@ int mtdparts_init(void) part->name = "static"; part->auto_name = 0; -#if defined(CONFIG_JFFS2_PART_SIZE) part->size = CONFIG_JFFS2_PART_SIZE; -#else - part->size = SIZE_REMAINING; -#endif -#if defined(CONFIG_JFFS2_PART_OFFSET) part->offset = CONFIG_JFFS2_PART_OFFSET; -#else - part->offset = 0x00000000; -#endif part->dev = current_mtd_dev; INIT_LIST_HEAD(&part->link); @@ -244,12 +244,12 @@ static int do_verify_mbr(struct blk_desc *dev, const char *str) for (i = 0; i < count; i++) { struct disk_partition p; - if (part_get_info(dev, i+1, &p)) + if (part_get_info(dev, i + 1, &p)) goto fail; - if ((partitions[i].size && p.size < partitions[i].size) || - (partitions[i].start && p.start < partitions[i].start) || - (p.sys_ind != partitions[i].sys_ind)) + if ((partitions[i].size && p.size != partitions[i].size) || + (partitions[i].start && p.start != partitions[i].start) || + p.sys_ind != partitions[i].sys_ind) goto fail; } ret = 0; diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c index a7f3ff3..1362c03 100644 --- a/cmd/mvebu/bubt.c +++ b/cmd/mvebu/bubt.c @@ -271,8 +271,8 @@ static int spi_burn_image(size_t image_size) u32 erase_bytes; /* Probe the SPI bus to get the flash device */ - flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, - CONFIG_ENV_SPI_CS, + flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, + CONFIG_SF_DEFAULT_CS, CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE); if (!flash) { @@ -384,7 +384,6 @@ static int do_spi_protect(int argc, char *const argv[]) return ret == 0 ? 0 : 1; } -#ifdef CONFIG_CMD_SF_TEST enum { STAGE_ERASE, STAGE_CHECK, @@ -394,7 +393,7 @@ enum { STAGE_COUNT, }; -static char *stage_name[STAGE_COUNT] = { +static const char *stage_name[STAGE_COUNT] = { "erase", "check", "write", @@ -548,7 +547,6 @@ static int do_spi_flash_test(int argc, char *const argv[]) return 0; } -#endif /* CONFIG_CMD_SF_TEST */ static int do_spi_flash(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) @@ -582,10 +580,8 @@ static int do_spi_flash(struct cmd_tbl *cmdtp, int flag, int argc, ret = do_spi_flash_erase(argc, argv); else if (strcmp(cmd, "protect") == 0) ret = do_spi_protect(argc, argv); -#ifdef CONFIG_CMD_SF_TEST - else if (!strcmp(cmd, "test")) + else if (IS_ENABLED(CONFIG_CMD_SF_TEST) && !strcmp(cmd, "test")) ret = do_spi_flash_test(argc, argv); -#endif else ret = -1; @@ -597,16 +593,8 @@ usage: return CMD_RET_USAGE; } -#ifdef CONFIG_CMD_SF_TEST -#define SF_TEST_HELP "\nsf test offset len " \ - "- run a very basic destructive test" -#else -#define SF_TEST_HELP -#endif - -U_BOOT_CMD( - sf, 5, 1, do_spi_flash, - "SPI flash sub-system", +#ifdef CONFIG_SYS_LONGHELP +static const char long_help[] = "probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n" " and chip select\n" "sf read addr offset|partition len - read `len' bytes starting at\n" @@ -622,6 +610,14 @@ U_BOOT_CMD( " at `addr' to flash at `offset'\n" " or to start of mtd `partition'\n" "sf protect lock/unlock sector len - protect/unprotect 'len' bytes starting\n" - " at address 'sector'\n" - SF_TEST_HELP + " at address 'sector'" +#ifdef CONFIG_CMD_SF_TEST + "\nsf test offset len - run a very basic destructive test" +#endif +#endif /* CONFIG_SYS_LONGHELP */ + ; + +U_BOOT_CMD( + sf, 5, 1, do_spi_flash, + "SPI flash sub-system", long_help ); diff --git a/cmd/unzip.c b/cmd/unzip.c index 3d1f5f3..bc6cee0 100644 --- a/cmd/unzip.c +++ b/cmd/unzip.c @@ -8,6 +8,7 @@ #include <command.h> #include <env.h> #include <gzip.h> +#include <mapmem.h> #include <part.h> static int do_unzip(struct cmd_tbl *cmdtp, int flag, int argc, @@ -28,7 +29,8 @@ static int do_unzip(struct cmd_tbl *cmdtp, int flag, int argc, return CMD_RET_USAGE; } - if (gunzip((void *) dst, dst_len, (void *) src, &src_len) != 0) + if (gunzip(map_sysmem(dst, dst_len), dst_len, map_sysmem(src, 0), + &src_len) != 0) return 1; printf("Uncompressed size: %lu = 0x%lX\n", src_len, src_len); diff --git a/common/Kconfig b/common/Kconfig index fdcf453..0892d9b 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -32,6 +32,16 @@ config CONSOLE_RECORD_OUT_SIZE more data will be recorded until some is removed. The buffer is allocated immediately after the malloc() region is ready. +config CONSOLE_RECORD_OUT_SIZE_F + hex "Output buffer size before relocation" + depends on CONSOLE_RECORD + default 0x400 if CONSOLE_RECORD + help + Set the size of the console output buffer before relocation. When + this fills up, no more data will be recorded until some is removed. + The buffer is allocated immediately after the early malloc() region is + ready. + config CONSOLE_RECORD_IN_SIZE hex "Input buffer size" depends on CONSOLE_RECORD @@ -524,6 +534,15 @@ config BOARD_LATE_INIT So this config enable the late init code with the help of board_late_init function which should defined on respective boards. +config SYS_FSL_CLK + bool + depends on ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 || \ + (FSL_ESDHC_IMX && (ARCH_MX5 || ARCH_MX6 || ARCH_MX7)) + default y + help + Enable to call get_clocks() in board_init_f() for platforms other + than PowerPC or M68k. This is a legacy option. If not TARGET_BRPPT2 + config LAST_STAGE_INIT bool "Call board-specific as last setup step" help @@ -717,6 +736,8 @@ config TPL_BLOBLIST This enables a bloblist in TPL. The bloblist is set up in TPL and passed to SPL and U-Boot proper. +if BLOBLIST + config BLOBLIST_SIZE hex "Size of bloblist" depends on BLOBLIST @@ -727,17 +748,24 @@ config BLOBLIST_SIZE is set up in the first part of U-Boot to run (TPL, SPL or U-Boot proper), and this sane bloblist is used for subsequent stages. +config BLOBLIST_ALLOC + bool "Allocate bloblist" + help + Allocate the bloblist using malloc(). This avoids the need to + specify a fixed address on systems where this is unknown or can + change at runtime. + config BLOBLIST_ADDR hex "Address of bloblist" - depends on BLOBLIST default 0xc000 if SANDBOX help Sets the address of the bloblist, set up by the first part of U-Boot which runs. Subsequent U-Boot stages typically use the same address. + This is not used if BLOBLIST_ALLOC is selected. + config BLOBLIST_SIZE_RELOC hex "Size of bloblist after relocation" - depends on BLOBLIST default BLOBLIST_SIZE help Sets the size of the bloblist in bytes after relocation. Since U-Boot @@ -745,6 +773,8 @@ config BLOBLIST_SIZE_RELOC size than the one set up by SPL. This bloblist is set up during the relocation process. +endif # BLOBLIST + endmenu source "common/spl/Kconfig" @@ -766,3 +796,12 @@ config SPL_IMAGE_SIGN_INFO Enable image_sign_info helper functions in SPL. endif + +config FDT_SIMPLEFB + bool "FDT tools for simplefb support" + depends on OF_LIBFDT + help + Enable the fdt tools to manage the simple fb nodes in device tree. + These functions can be used by board to indicate to the OS + the presence of the simple frame buffer with associated reserved + memory diff --git a/common/Makefile b/common/Makefile index c500bcd..24be05c 100644 --- a/common/Makefile +++ b/common/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o obj-$(CONFIG_CMD_BEDBUG) += bedbug.o +obj-$(CONFIG_FDT_SIMPLEFB) += fdt_simplefb.o obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o obj-$(CONFIG_MII) += miiphyutil.o obj-$(CONFIG_CMD_MII) += miiphyutil.o @@ -40,7 +41,6 @@ ifndef CONFIG_DM_VIDEO obj-$(CONFIG_LCD) += lcd.o lcd_console.o endif obj-$(CONFIG_LCD_ROTATION) += lcd_console_rotation.o -obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o obj-$(CONFIG_MENU) += menu.o obj-$(CONFIG_UPDATE_COMMON) += update.o obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o diff --git a/common/bloblist.c b/common/bloblist.c index 1290fff..01b0410 100644 --- a/common/bloblist.c +++ b/common/bloblist.c @@ -7,6 +7,7 @@ #include <common.h> #include <bloblist.h> #include <log.h> +#include <malloc.h> #include <mapmem.h> #include <spl.h> #include <asm/global_data.h> @@ -416,10 +417,21 @@ int bloblist_init(void) ret = bloblist_check(CONFIG_BLOBLIST_ADDR, CONFIG_BLOBLIST_SIZE); if (ret) { + ulong addr; + log(LOGC_BLOBLIST, expected ? LOGL_WARNING : LOGL_DEBUG, "Existing bloblist not found: creating new bloblist\n"); - ret = bloblist_new(CONFIG_BLOBLIST_ADDR, CONFIG_BLOBLIST_SIZE, - 0); + if (IS_ENABLED(CONFIG_BLOBLIST_ALLOC)) { + void *ptr = memalign(BLOBLIST_ALIGN, + CONFIG_BLOBLIST_SIZE); + + if (!ptr) + return log_msg_ret("alloc", -ENOMEM); + addr = map_to_sysmem(ptr); + } else { + addr = CONFIG_BLOBLIST_ADDR; + } + ret = bloblist_new(addr, CONFIG_BLOBLIST_SIZE, 0); } else { log(LOGC_BLOBLIST, LOGL_DEBUG, "Found existing bloblist\n"); } diff --git a/common/board_f.c b/common/board_f.c index f7ea7c7..dd69c3b 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -655,8 +655,14 @@ static int reloc_bootstage(void) static int reloc_bloblist(void) { #ifdef CONFIG_BLOBLIST - if (gd->flags & GD_FLG_SKIP_RELOC) + /* + * Relocate only if we are supposed to send it + */ + if ((gd->flags & GD_FLG_SKIP_RELOC) && + CONFIG_BLOBLIST_SIZE == CONFIG_BLOBLIST_SIZE_RELOC) { + debug("Not relocating bloblist\n"); return 0; + } if (gd->new_bloblist) { int size = CONFIG_BLOBLIST_SIZE; diff --git a/common/board_r.c b/common/board_r.c index 31a59c5..760c2d0 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -586,6 +586,29 @@ int initr_mem(void) } #endif +static int dm_announce(void) +{ + int device_count; + int uclass_count; + + if (IS_ENABLED(CONFIG_DM)) { + dm_get_stats(&device_count, &uclass_count); + printf("Core: %d devices, %d uclasses", device_count, + uclass_count); + if (CONFIG_IS_ENABLED(OF_REAL)) + printf(", devicetree: %s", fdtdec_get_srcname()); + printf("\n"); + if (IS_ENABLED(CONFIG_OF_HAS_PRIOR_STAGE) && + (gd->fdt_src == FDTSRC_SEPARATE || + gd->fdt_src == FDTSRC_EMBED)) { + printf("Warning: Unexpected devicetree source (not from a prior stage)"); + printf("Warning: U-Boot may not function properly\n"); + } + } + + return 0; +} + static int run_main_loop(void) { #ifdef CONFIG_SANDBOX @@ -661,6 +684,7 @@ static init_fnc_t init_sequence_r[] = { stdio_init_tables, serial_initialize, initr_announce, + dm_announce, #if CONFIG_IS_ENABLED(WDT) initr_watchdog, #endif @@ -817,9 +841,8 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) * TODO(sjg@chromium.org): Consider doing this for all archs, or * dropping the new_gd parameter. */ -#if CONFIG_IS_ENABLED(X86_64) - arch_setup_gd(new_gd); -#endif + if (CONFIG_IS_ENABLED(X86_64) && !IS_ENABLED(CONFIG_EFI_APP)) + arch_setup_gd(new_gd); #ifdef CONFIG_NEEDS_MANUAL_RELOC int i; diff --git a/common/console.c b/common/console.c index 0013d18..2bccc8a 100644 --- a/common/console.c +++ b/common/console.c @@ -348,7 +348,8 @@ static void console_puts_select(int file, bool serial_only, const char *s) void console_puts_select_stderr(bool serial_only, const char *s) { - console_puts_select(stderr, serial_only, s); + if (gd->flags & GD_FLG_DEVINIT) + console_puts_select(stderr, serial_only, s); } static void console_puts(int file, const char *s) @@ -401,7 +402,8 @@ static inline void console_putc(int file, const char c) void console_puts_select(int file, bool serial_only, const char *s) { - if (serial_only == console_dev_is_serial(stdio_devices[file])) + if ((gd->flags & GD_FLG_DEVINIT) && + serial_only == console_dev_is_serial(stdio_devices[file])) stdio_devices[file]->puts(stdio_devices[file], s); } @@ -735,7 +737,9 @@ int console_record_init(void) int ret; ret = membuff_new((struct membuff *)&gd->console_out, - CONFIG_CONSOLE_RECORD_OUT_SIZE); + gd->flags & GD_FLG_RELOC ? + CONFIG_CONSOLE_RECORD_OUT_SIZE : + CONFIG_CONSOLE_RECORD_OUT_SIZE_F); if (ret) return ret; ret = membuff_new((struct membuff *)&gd->console_in, diff --git a/common/lcd_simplefb.c b/common/fdt_simplefb.c index 1650615..c52846f 100644 --- a/common/lcd_simplefb.c +++ b/common/fdt_simplefb.c @@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR; -static int lcd_dt_simplefb_configure_node(void *blob, int off) +static int fdt_simplefb_configure_node(void *blob, int off) { int xsize, ysize; int bpix; /* log2 of bits per pixel */ @@ -58,7 +58,7 @@ static int lcd_dt_simplefb_configure_node(void *blob, int off) xsize * (1 << bpix) / 8, name); } -int lcd_dt_simplefb_add_node(void *blob) +int fdt_simplefb_add_node(void *blob) { static const char compat[] = "simple-framebuffer"; static const char disabled[] = "disabled"; @@ -76,10 +76,10 @@ int lcd_dt_simplefb_add_node(void *blob) if (ret < 0) return -1; - return lcd_dt_simplefb_configure_node(blob, off); + return fdt_simplefb_configure_node(blob, off); } -int lcd_dt_simplefb_enable_existing_node(void *blob) +int fdt_simplefb_enable_existing_node(void *blob) { int off; @@ -87,5 +87,32 @@ int lcd_dt_simplefb_enable_existing_node(void *blob) if (off < 0) return -1; - return lcd_dt_simplefb_configure_node(blob, off); + return fdt_simplefb_configure_node(blob, off); } + +#if CONFIG_IS_ENABLED(DM_VIDEO) +int fdt_simplefb_enable_and_mem_rsv(void *blob) +{ + struct fdt_memory mem; + int ret; + + /* nothing to do when video is not active */ + if (!video_is_active()) + return 0; + + ret = fdt_simplefb_enable_existing_node(blob); + if (ret) + return ret; + + /* nothing to do when the frame buffer is not defined */ + if (gd->video_bottom == gd->video_top) + return 0; + + /* reserved with no-map tag the video buffer */ + mem.start = gd->video_bottom; + mem.end = gd->video_top - 1; + + return fdtdec_add_reserved_memory(blob, "framebuffer", &mem, NULL, 0, NULL, + FDTDEC_RESERVED_MEMORY_NO_MAP); +} +#endif diff --git a/common/fdt_support.c b/common/fdt_support.c index 8992ac5..b2ba082 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -695,6 +695,29 @@ int fdt_shrink_to_minimum(void *blob, uint extrasize) return actualsize; } +/** + * fdt_delete_disabled_nodes: Delete all nodes with status == "disabled" + * + * @blob: ptr to device tree + */ +int fdt_delete_disabled_nodes(void *blob) +{ + while (1) { + int ret, offset; + + offset = fdt_node_offset_by_prop_value(blob, -1, "status", + "disabled", 9); + if (offset < 0) + break; + + ret = fdt_del_node(blob, offset); + if (ret < 0) + return ret; + } + + return 0; +} + #ifdef CONFIG_PCI #define CONFIG_SYS_PCI_NR_INBOUND_WIN 4 @@ -1463,22 +1486,35 @@ int fdt_node_offset_by_compat_reg(void *blob, const char *compat, return -FDT_ERR_NOTFOUND; } +static int vnode_offset_by_pathf(void *blob, const char *fmt, va_list ap) +{ + char path[512]; + int len; + + len = vsnprintf(path, sizeof(path), fmt, ap); + if (len < 0 || len + 1 > sizeof(path)) + return -FDT_ERR_NOSPACE; + + return fdt_path_offset(blob, path); +} + /** - * fdt_alloc_phandle: Return next free phandle value + * fdt_node_offset_by_pathf: Find node offset by sprintf formatted path * * @blob: ptr to device tree + * @fmt: path format + * @ap: vsnprintf arguments */ -int fdt_alloc_phandle(void *blob) +int fdt_node_offset_by_pathf(void *blob, const char *fmt, ...) { - int offset; - uint32_t phandle = 0; + va_list ap; + int res; - for (offset = fdt_next_node(blob, -1, NULL); offset >= 0; - offset = fdt_next_node(blob, offset, NULL)) { - phandle = max(phandle, fdt_get_phandle(blob, offset)); - } + va_start(ap, fmt); + res = vnode_offset_by_pathf(blob, fmt, ap); + va_end(ap); - return phandle + 1; + return res; } /* @@ -1522,7 +1558,7 @@ int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle) } /* - * fdt_create_phandle: Create a phandle property for the given node + * fdt_create_phandle: Get or create a phandle property for the given node * * @fdt: ptr to device tree * @nodeoffset: node to update @@ -1530,13 +1566,19 @@ int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle) unsigned int fdt_create_phandle(void *fdt, int nodeoffset) { /* see if there is a phandle already */ - int phandle = fdt_get_phandle(fdt, nodeoffset); + uint32_t phandle = fdt_get_phandle(fdt, nodeoffset); /* if we got 0, means no phandle so create one */ if (phandle == 0) { int ret; - phandle = fdt_alloc_phandle(fdt); + ret = fdt_generate_phandle(fdt, &phandle); + if (ret < 0) { + printf("Can't generate phandle: %s\n", + fdt_strerror(ret)); + return 0; + } + ret = fdt_set_phandle(fdt, nodeoffset, phandle); if (ret < 0) { printf("Can't set phandle %u: %s\n", phandle, @@ -1548,19 +1590,60 @@ unsigned int fdt_create_phandle(void *fdt, int nodeoffset) return phandle; } +/** + * fdt_create_phandle_by_compatible: Get or create a phandle for first node with + * given compatible + * + * @fdt: ptr to device tree + * @compat: node's compatible string + */ +unsigned int fdt_create_phandle_by_compatible(void *fdt, const char *compat) +{ + int offset = fdt_node_offset_by_compatible(fdt, -1, compat); + + if (offset < 0) { + printf("Can't find node with compatible \"%s\": %s\n", compat, + fdt_strerror(offset)); + return 0; + } + + return fdt_create_phandle(fdt, offset); +} + +/** + * fdt_create_phandle_by_pathf: Get or create a phandle for node given by + * sprintf-formatted path + * + * @fdt: ptr to device tree + * @fmt, ...: path format string and arguments to pass to sprintf + */ +unsigned int fdt_create_phandle_by_pathf(void *fdt, const char *fmt, ...) +{ + va_list ap; + int offset; + + va_start(ap, fmt); + offset = vnode_offset_by_pathf(fdt, fmt, ap); + va_end(ap); + + if (offset < 0) { + printf("Can't find node by given path: %s\n", + fdt_strerror(offset)); + return 0; + } + + return fdt_create_phandle(fdt, offset); +} + /* * fdt_set_node_status: Set status for the given node * * @fdt: ptr to device tree * @nodeoffset: node to update - * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED, - * FDT_STATUS_FAIL, FDT_STATUS_FAIL_ERROR_CODE - * @error_code: optional, only used if status is FDT_STATUS_FAIL_ERROR_CODE + * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED, FDT_STATUS_FAIL */ -int fdt_set_node_status(void *fdt, int nodeoffset, - enum fdt_status status, unsigned int error_code) +int fdt_set_node_status(void *fdt, int nodeoffset, enum fdt_status status) { - char buf[16]; int ret = 0; if (nodeoffset < 0) @@ -1576,10 +1659,6 @@ int fdt_set_node_status(void *fdt, int nodeoffset, case FDT_STATUS_FAIL: ret = fdt_setprop_string(fdt, nodeoffset, "status", "fail"); break; - case FDT_STATUS_FAIL_ERROR_CODE: - sprintf(buf, "fail-%d", error_code); - ret = fdt_setprop_string(fdt, nodeoffset, "status", buf); - break; default: printf("Invalid fdt status: %x\n", status); ret = -1; @@ -1594,16 +1673,57 @@ int fdt_set_node_status(void *fdt, int nodeoffset, * * @fdt: ptr to device tree * @alias: alias of node to update - * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED, - * FDT_STATUS_FAIL, FDT_STATUS_FAIL_ERROR_CODE - * @error_code: optional, only used if status is FDT_STATUS_FAIL_ERROR_CODE + * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED, FDT_STATUS_FAIL */ int fdt_set_status_by_alias(void *fdt, const char* alias, - enum fdt_status status, unsigned int error_code) + enum fdt_status status) { int offset = fdt_path_offset(fdt, alias); - return fdt_set_node_status(fdt, offset, status, error_code); + return fdt_set_node_status(fdt, offset, status); +} + +/** + * fdt_set_status_by_compatible: Set node status for first node with given + * compatible + * + * @fdt: ptr to device tree + * @compat: node's compatible string + * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED, FDT_STATUS_FAIL + */ +int fdt_set_status_by_compatible(void *fdt, const char *compat, + enum fdt_status status) +{ + int offset = fdt_node_offset_by_compatible(fdt, -1, compat); + + if (offset < 0) + return offset; + + return fdt_set_node_status(fdt, offset, status); +} + +/** + * fdt_set_status_by_pathf: Set node status for node given by sprintf-formatted + * path + * + * @fdt: ptr to device tree + * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED, FDT_STATUS_FAIL + * @fmt, ...: path format string and arguments to pass to sprintf + */ +int fdt_set_status_by_pathf(void *fdt, enum fdt_status status, const char *fmt, + ...) +{ + va_list ap; + int offset; + + va_start(ap, fmt); + offset = vnode_offset_by_pathf(fdt, fmt, ap); + va_end(ap); + + if (offset < 0) + return offset; + + return fdt_set_node_status(fdt, offset, status); } #if defined(CONFIG_VIDEO) || defined(CONFIG_LCD) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 17ce2f6..4a739a7 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1351,14 +1351,6 @@ config TPL_LDSCRIPT May be left empty to trigger the Makefile infrastructure to fall back to the linker-script used for the SPL stage. -config TPL_NEEDS_SEPARATE_TEXT_BASE - bool "TPL needs a separate text-base" - depends on TPL - help - Enable, if the TPL stage should not inherit its text-base - from the SPL stage. When enabled, a base address for the - .text sections of the TPL stage has to be set below. - config TPL_NEEDS_SEPARATE_STACK bool "TPL needs a separate initial stack-pointer" depends on TPL @@ -1380,7 +1372,6 @@ config TPL_POWER config TPL_TEXT_BASE hex "Base address for the .text section of the TPL stage" - depends on TPL_NEEDS_SEPARATE_TEXT_BASE help The base address for the .text section of the TPL stage. diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 5fe0273..774072b 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -286,6 +286,13 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector, if (fit_image_get_data_size(fit, node, &len)) return -ENOENT; + /* Dont bother to copy 0 byte data, but warn, though */ + if (!len) { + log_warning("%s: Skip load '%s': image size is 0!\n", + __func__, fit_get_name(fit, node, NULL)); + return 0; + } + src_ptr = map_sysmem(ALIGN(load_addr, ARCH_DMA_MINALIGN), len); length = len; diff --git a/common/splash.c b/common/splash.c index de720df..98f0089 100644 --- a/common/splash.c +++ b/common/splash.c @@ -52,7 +52,7 @@ static struct splash_location default_splash_locations[] = { }, }; -#if defined(CONFIG_DM_VIDEO) && defined(CONFIG_VIDEO_LOGO) +#ifdef CONFIG_VIDEO_LOGO #include <bmp_logo_data.h> diff --git a/common/splash_source.c b/common/splash_source.c index d05670f..2c03cbd 100644 --- a/common/splash_source.c +++ b/common/splash_source.c @@ -20,6 +20,7 @@ #include <spi_flash.h> #include <splash.h> #include <usb.h> +#include <virtio.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; @@ -179,6 +180,16 @@ static inline int splash_init_sata(void) } #endif +static int splash_init_virtio(void) +{ + if (!IS_ENABLED(CONFIG_VIRTIO)) { + printf("Cannot load splash image: no virtio support\n"); + return -ENOSYS; + } else { + return virtio_init(); + } +} + #ifdef CONFIG_CMD_UBIFS static int splash_mount_ubifs(struct splash_location *location) { @@ -233,6 +244,9 @@ static int splash_load_fs(struct splash_location *location, u32 bmp_load_addr) if (location->storage == SPLASH_STORAGE_SATA) res = splash_init_sata(); + if (location->storage == SPLASH_STORAGE_VIRTIO) + res = splash_init_virtio(); + if (location->ubivol != NULL) res = splash_mount_ubifs(location); @@ -50,8 +50,10 @@ endif ifneq ($(BOARD),) ifdef VENDOR BOARDDIR = $(VENDOR)/$(BOARD) +ENVDIR=${vendor}/env else BOARDDIR = $(BOARD) +ENVDIR=${board}/env endif endif ifdef BOARD diff --git a/configs/M5272C3_defconfig b/configs/M5272C3_defconfig index 3d32a6f..e46b097 100644 --- a/configs/M5272C3_defconfig +++ b/configs/M5272C3_defconfig @@ -20,6 +20,30 @@ CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_ENV_ADDR=0xFFE04000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFFE00201 +CONFIG_SYS_OR0_PRELIM=0xFFE00014 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0x0 +CONFIG_SYS_OR1_PRELIM=0x0 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0x30000001 +CONFIG_SYS_OR2_PRELIM=0xFFF80000 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0x0 +CONFIG_SYS_OR3_PRELIM=0x0 +CONFIG_SYS_BR4_PRELIM_BOOL=y +CONFIG_SYS_BR4_PRELIM=0x0 +CONFIG_SYS_OR4_PRELIM=0x0 +CONFIG_SYS_BR5_PRELIM_BOOL=y +CONFIG_SYS_BR5_PRELIM=0x0 +CONFIG_SYS_OR5_PRELIM=0x0 +CONFIG_SYS_BR6_PRELIM_BOOL=y +CONFIG_SYS_BR6_PRELIM=0x0 +CONFIG_SYS_OR6_PRELIM=0x0 +CONFIG_SYS_BR7_PRELIM_BOOL=y +CONFIG_SYS_BR7_PRELIM=0x701 +CONFIG_SYS_OR7_PRELIM=0xFFC0007C CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig index aed36ce..3cb77b7 100644 --- a/configs/M5275EVB_defconfig +++ b/configs/M5275EVB_defconfig @@ -7,6 +7,8 @@ CONFIG_DEFAULT_DEVICE_TREE="M5275EVB" CONFIG_TARGET_M5275EVB=y CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="bootm ffe40000" # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig index 6254655..04fe756 100644 --- a/configs/MCR3000_defconfig +++ b/configs/MCR3000_defconfig @@ -4,7 +4,6 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="mcr3000" CONFIG_MPC8xx=y -CONFIG_SYS_IMMR=0xFF000000 CONFIG_TARGET_MCR3000=y CONFIG_8xx_GCLK_FREQ=132000000 CONFIG_CMD_IMMAP=y @@ -17,29 +16,6 @@ CONFIG_SYS_PLPRCR=0x00460004 CONFIG_SYS_SCCR=0x00C20000 CONFIG_SYS_SCCR_MASK=0x60000000 CONFIG_SYS_DER=0x2002000F -CONFIG_SYS_BR0_PRELIM=0x04000801 -CONFIG_SYS_OR0_PRELIM=0xFFC00926 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0x00000081 -CONFIG_SYS_OR1_PRELIM=0xFE000E00 -CONFIG_SYS_BR2_PRELIM_BOOL=y -CONFIG_SYS_BR2_PRELIM=0x08000801 -CONFIG_SYS_OR2_PRELIM=0xFFFF8F2A -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0x0C000401 -CONFIG_SYS_OR3_PRELIM=0xFFFF8142 -CONFIG_SYS_BR4_PRELIM_BOOL=y -CONFIG_SYS_BR4_PRELIM=0x10000801 -CONFIG_SYS_OR4_PRELIM=0xFFFF8D08 -CONFIG_SYS_BR5_PRELIM_BOOL=y -CONFIG_SYS_BR5_PRELIM=0x14000801 -CONFIG_SYS_OR5_PRELIM=0xFFFF8916 -CONFIG_SYS_BR6_PRELIM_BOOL=y -CONFIG_SYS_BR6_PRELIM=0x18000801 -CONFIG_SYS_OR6_PRELIM=0xFFFF0908 -CONFIG_SYS_BR7_PRELIM_BOOL=y -CONFIG_SYS_BR7_PRELIM=0x1C000001 -CONFIG_SYS_OR7_PRELIM=0xFFFF810A CONFIG_SYS_LOAD_ADDR=0x200000 CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 @@ -74,6 +50,30 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x4004000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0x4000801 +CONFIG_SYS_OR0_PRELIM=0xFFC00926 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0x81 +CONFIG_SYS_OR1_PRELIM=0xFE000E00 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0x8000801 +CONFIG_SYS_OR2_PRELIM=0xFFFF8F2A +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xC000401 +CONFIG_SYS_OR3_PRELIM=0xFFFF8142 +CONFIG_SYS_BR4_PRELIM_BOOL=y +CONFIG_SYS_BR4_PRELIM=0x10000801 +CONFIG_SYS_OR4_PRELIM=0xFFFF8D08 +CONFIG_SYS_BR5_PRELIM_BOOL=y +CONFIG_SYS_BR5_PRELIM=0x14000801 +CONFIG_SYS_OR5_PRELIM=0xFFFF8916 +CONFIG_SYS_BR6_PRELIM_BOOL=y +CONFIG_SYS_BR6_PRELIM=0x18000801 +CONFIG_SYS_OR6_PRELIM=0xFFFF0908 +CONFIG_SYS_BR7_PRELIM_BOOL=y +CONFIG_SYS_BR7_PRELIM=0x1C000001 +CONFIG_SYS_OR7_PRELIM=0xFFFF810A # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 52785ce..192bcae 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -5,6 +5,7 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DEFAULT_DEVICE_TREE="mpc8379erdb" CONFIG_SYS_CLK_FREQ=66666667 +# CONFIG_SYS_PCI_64BIT is not set CONFIG_MPC83xx=y CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC837XERDB=y @@ -169,6 +170,15 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_ADDR=0xFE080000 CONFIG_DM=y CONFIG_FSL_SATA=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFE001001 +CONFIG_SYS_OR0_PRELIM=0xFF800193 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0600C21 +CONFIG_SYS_OR1_PRELIM=0xFFFF8396 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xF0000801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 @@ -189,3 +199,4 @@ CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig index 3b43775..e2afcde 100644 --- a/configs/MPC8548CDS_36BIT_defconfig +++ b/configs/MPC8548CDS_36BIT_defconfig @@ -11,7 +11,10 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_PHYS_64BIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" # CONFIG_MISC_INIT_R is not set CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y @@ -29,6 +32,18 @@ CONFIG_ENV_ADDR=0xFFF60000 CONFIG_DM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF807001 +CONFIG_SYS_OR0_PRELIM=0xFF806E65 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xFF007001 +CONFIG_SYS_OR1_PRELIM=0xFF806E65 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xF0007861 +CONFIG_SYS_OR2_PRELIM=0xFC006901 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xF8006801 +CONFIG_SYS_OR3_PRELIM=0xFFF00FF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig index 551630b..e8f44cf 100644 --- a/configs/MPC8548CDS_defconfig +++ b/configs/MPC8548CDS_defconfig @@ -10,7 +10,10 @@ CONFIG_TARGET_MPC8548CDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" # CONFIG_MISC_INIT_R is not set CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y @@ -28,6 +31,18 @@ CONFIG_ENV_ADDR=0xFFF60000 CONFIG_DM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF801001 +CONFIG_SYS_OR0_PRELIM=0xFF806E65 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xFF001001 +CONFIG_SYS_OR1_PRELIM=0xFF806E65 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xF0001861 +CONFIG_SYS_OR2_PRELIM=0xFC006901 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xF8000801 +CONFIG_SYS_OR3_PRELIM=0xFFF00FF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig index 6584f67..577385d 100644 --- a/configs/MPC8548CDS_legacy_defconfig +++ b/configs/MPC8548CDS_legacy_defconfig @@ -11,7 +11,10 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="LEGACY" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" # CONFIG_MISC_INIT_R is not set CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y @@ -28,6 +31,18 @@ CONFIG_ENV_ADDR=0xFFF60000 CONFIG_DM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF801001 +CONFIG_SYS_OR0_PRELIM=0xFF806E65 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xFF001001 +CONFIG_SYS_OR1_PRELIM=0xFF806E65 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xF0001861 +CONFIG_SYS_OR2_PRELIM=0xFC006901 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xF8000801 +CONFIG_SYS_OR3_PRELIM=0xFFF00FF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index 84e0c64..ef7f24b 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xD0001000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_DRIVERS_MISC=y @@ -20,6 +21,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -69,6 +72,8 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -94,4 +99,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig index f33cc22..892a8a6 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig @@ -13,6 +13,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -74,4 +76,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig index 2bbb5a6..705d0da 100644 --- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig @@ -20,6 +20,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -86,4 +88,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig index 28ad6a9..e4ad50f 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig @@ -22,6 +22,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -88,4 +90,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index adf3989..b303c4c 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xD0001000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_DRIVERS_MISC=y @@ -19,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -68,6 +71,8 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -93,3 +98,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig index 6546823..8db09ba 100644 --- a/configs/P1010RDB-PA_NOR_defconfig +++ b/configs/P1010RDB-PA_NOR_defconfig @@ -12,6 +12,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -73,3 +75,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig index 8a32201..f02757d 100644 --- a/configs/P1010RDB-PA_SDCARD_defconfig +++ b/configs/P1010RDB-PA_SDCARD_defconfig @@ -19,6 +19,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -85,3 +87,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig index cbf5f38..9a09473 100644 --- a/configs/P1010RDB-PA_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_defconfig @@ -21,6 +21,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -87,3 +89,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index c8e7847..8582868 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xD0001000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_DRIVERS_MISC=y @@ -20,6 +21,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -72,6 +75,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -97,4 +102,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig index 88cd0bd..84173e2 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig @@ -13,6 +13,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -76,4 +78,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig index fa919b0..4b0a1ab 100644 --- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig @@ -20,6 +20,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -88,4 +90,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig index 9277677..986b992 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig @@ -22,6 +22,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -90,4 +92,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index 56c05c3..e436476 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xD0001000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_DRIVERS_MISC=y @@ -19,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -71,6 +74,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -96,3 +101,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig index d374297..62f4c89 100644 --- a/configs/P1010RDB-PB_NOR_defconfig +++ b/configs/P1010RDB-PB_NOR_defconfig @@ -12,6 +12,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -75,3 +77,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig index ec4f1e8..9cdb359 100644 --- a/configs/P1010RDB-PB_SDCARD_defconfig +++ b/configs/P1010RDB-PB_SDCARD_defconfig @@ -19,6 +19,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -87,3 +89,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig index 1c53b96..299564c 100644 --- a/configs/P1010RDB-PB_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_defconfig @@ -21,6 +21,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y @@ -89,3 +91,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index 7e3db2d..7c4bdb8 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xF8F81000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL=y @@ -20,6 +21,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -52,6 +55,18 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF800C21 +CONFIG_SYS_OR0_PRELIM=0xFFFF8396 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xEF001001 +CONFIG_SYS_OR1_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y @@ -70,6 +85,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_ELBC=y CONFIG_SYS_NAND_BLOCK_SIZE=0x4000 +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -96,5 +113,6 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig index 4bee5d8..24b5f2e 100644 --- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig @@ -20,6 +20,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -48,6 +50,15 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -88,5 +99,6 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig index 58db2f6..a008103 100644 --- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig @@ -22,6 +22,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -50,6 +52,15 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -90,5 +101,6 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig index fd45e51..fe8bf09 100644 --- a/configs/P1020RDB-PC_36BIT_defconfig +++ b/configs/P1020RDB-PC_36BIT_defconfig @@ -14,6 +14,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -37,6 +39,15 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -77,5 +88,6 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index d799201..9ccc62a 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xF8F81000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL=y @@ -19,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -51,6 +54,18 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF800C21 +CONFIG_SYS_OR0_PRELIM=0xFFFF8396 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xEF001001 +CONFIG_SYS_OR1_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y @@ -69,6 +84,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_ELBC=y CONFIG_SYS_NAND_BLOCK_SIZE=0x4000 +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -95,4 +112,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig index 196356c..3f92788 100644 --- a/configs/P1020RDB-PC_SDCARD_defconfig +++ b/configs/P1020RDB-PC_SDCARD_defconfig @@ -19,6 +19,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -47,6 +49,15 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -87,4 +98,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig index 4207a1b..cc8fbb0 100644 --- a/configs/P1020RDB-PC_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_SPIFLASH_defconfig @@ -21,6 +21,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -49,6 +51,15 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -89,4 +100,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig index 2bc929b..9eb5027 100644 --- a/configs/P1020RDB-PC_defconfig +++ b/configs/P1020RDB-PC_defconfig @@ -13,6 +13,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -36,6 +38,15 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -76,4 +87,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index e1e5b06..874b338 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xF8F81000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL=y @@ -19,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -54,6 +57,18 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF800C21 +CONFIG_SYS_OR0_PRELIM=0xFFFF8796 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xEC001001 +CONFIG_SYS_OR1_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y @@ -73,6 +88,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_ELBC=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -99,4 +116,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index 448412e..24e90be 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -19,6 +19,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -50,6 +52,15 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEC001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -91,4 +102,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index bcedde3..bac13aa 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -21,6 +21,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -52,6 +54,15 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEC001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -93,4 +104,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index c2b3e05..58ef741 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -13,6 +13,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -39,6 +41,15 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEC001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -80,4 +91,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index 205c042..ab30b8e 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc_36b" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xF8F81000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL=y @@ -20,6 +21,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -56,6 +59,18 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF800C21 +CONFIG_SYS_OR0_PRELIM=0xFFFF8396 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xEF001001 +CONFIG_SYS_OR1_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y @@ -75,6 +90,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_ELBC=y CONFIG_SYS_NAND_BLOCK_SIZE=0x4000 +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -101,5 +118,6 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig index 6f421ac..7137d20 100644 --- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig @@ -20,6 +20,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -52,6 +54,15 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -93,5 +104,6 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig index 64281ea..9732648 100644 --- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig @@ -22,6 +22,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -54,6 +56,15 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -95,5 +106,6 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig index 0b74fa1..535f859 100644 --- a/configs/P2020RDB-PC_36BIT_defconfig +++ b/configs/P2020RDB-PC_36BIT_defconfig @@ -14,6 +14,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -41,6 +43,15 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -82,5 +93,6 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index f762535..9de2f76 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc" CONFIG_SPL_TEXT_BASE=0xFF800000 CONFIG_SPL_SERIAL=y +CONFIG_TPL_TEXT_BASE=0xF8F81000 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL=y @@ -19,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -55,6 +58,18 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF800C21 +CONFIG_SYS_OR0_PRELIM=0xFFFF8396 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xEF001001 +CONFIG_SYS_OR1_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y @@ -74,6 +89,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_ELBC=y CONFIG_SYS_NAND_BLOCK_SIZE=0x4000 +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_SPANSION=y @@ -100,4 +117,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig index fd76c2b..72e12b5 100644 --- a/configs/P2020RDB-PC_SDCARD_defconfig +++ b/configs/P2020RDB-PC_SDCARD_defconfig @@ -19,6 +19,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -51,6 +53,15 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -92,3 +103,4 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig index 2e8882a..bddbcec 100644 --- a/configs/P2020RDB-PC_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_SPIFLASH_defconfig @@ -21,6 +21,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -53,6 +55,15 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -94,4 +105,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig index 783f046..cce0fe2 100644 --- a/configs/P2020RDB-PC_defconfig +++ b/configs/P2020RDB-PC_defconfig @@ -13,6 +13,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set @@ -40,6 +42,15 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y CONFIG_DDR_CLK_FREQ=66666666 +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xEF001001 +CONFIG_SYS_OR0_PRELIM=0xFC000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xFFB00801 +CONFIG_SYS_OR2_PRELIM=0xFFFE09FF +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFA00801 +CONFIG_SYS_OR3_PRELIM=0xFFF009F7 CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -81,4 +92,5 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig index 63a15ce..b7acfe0 100644 --- a/configs/P2041RDB_NAND_defconfig +++ b/configs/P2041RDB_NAND_defconfig @@ -11,10 +11,13 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -38,6 +41,15 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFFA00C21 +CONFIG_SYS_OR0_PRELIM=0xFFFC0796 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8001001 +CONFIG_SYS_OR1_PRELIM=0xF8000F85 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -71,6 +83,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig index eb97360..fa21910 100644 --- a/configs/P2041RDB_SDCARD_defconfig +++ b/configs/P2041RDB_SDCARD_defconfig @@ -12,10 +12,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -39,6 +42,12 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -70,6 +79,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig index 1937110..ba9b8df 100644 --- a/configs/P2041RDB_SPIFLASH_defconfig +++ b/configs/P2041RDB_SPIFLASH_defconfig @@ -13,10 +13,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -40,6 +43,12 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -71,6 +80,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig index 7b430f6..53130cc 100644 --- a/configs/P2041RDB_defconfig +++ b/configs/P2041RDB_defconfig @@ -11,7 +11,10 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -35,6 +38,12 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xEFF20000 CONFIG_DM=y CONFIG_FSL_CAAM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -66,6 +75,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig index 96a6161..29a968d 100644 --- a/configs/P3041DS_NAND_defconfig +++ b/configs/P3041DS_NAND_defconfig @@ -11,10 +11,13 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -38,6 +41,18 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFFA00C21 +CONFIG_SYS_OR0_PRELIM=0xFFFC0796 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xE8001001 +CONFIG_SYS_OR2_PRELIM=0xF8000F85 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -70,6 +85,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P3041DS_SDCARD_defconfig b/configs/P3041DS_SDCARD_defconfig index 49a30dd..72c3b7a 100644 --- a/configs/P3041DS_SDCARD_defconfig +++ b/configs/P3041DS_SDCARD_defconfig @@ -12,10 +12,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -39,6 +42,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -69,6 +81,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P3041DS_SPIFLASH_defconfig b/configs/P3041DS_SPIFLASH_defconfig index 047d65b..abb9ce6 100644 --- a/configs/P3041DS_SPIFLASH_defconfig +++ b/configs/P3041DS_SPIFLASH_defconfig @@ -13,10 +13,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -40,6 +43,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -70,6 +82,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P3041DS_defconfig b/configs/P3041DS_defconfig index 821a7c3..39dd708 100644 --- a/configs/P3041DS_defconfig +++ b/configs/P3041DS_defconfig @@ -11,7 +11,10 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -35,6 +38,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -65,6 +77,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P4080DS_SDCARD_defconfig b/configs/P4080DS_SDCARD_defconfig index 9186ed1..bd66e31 100644 --- a/configs/P4080DS_SDCARD_defconfig +++ b/configs/P4080DS_SDCARD_defconfig @@ -12,10 +12,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p4080ds.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -39,6 +42,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -68,6 +80,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P4080DS_SPIFLASH_defconfig b/configs/P4080DS_SPIFLASH_defconfig index 2a4dc5d..79f51c9 100644 --- a/configs/P4080DS_SPIFLASH_defconfig +++ b/configs/P4080DS_SPIFLASH_defconfig @@ -13,10 +13,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p4080ds.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -40,6 +43,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -69,6 +81,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P4080DS_defconfig b/configs/P4080DS_defconfig index 564f28c..43f16d4 100644 --- a/configs/P4080DS_defconfig +++ b/configs/P4080DS_defconfig @@ -11,7 +11,10 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -35,6 +38,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -64,6 +76,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P5040DS_NAND_defconfig b/configs/P5040DS_NAND_defconfig index 370eb23..6f31034 100644 --- a/configs/P5040DS_NAND_defconfig +++ b/configs/P5040DS_NAND_defconfig @@ -11,10 +11,13 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -39,6 +42,18 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFFA00C21 +CONFIG_SYS_OR0_PRELIM=0xFFFC0796 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xE8001001 +CONFIG_SYS_OR2_PRELIM=0xF8000F85 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -71,6 +86,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P5040DS_SDCARD_defconfig b/configs/P5040DS_SDCARD_defconfig index 8e0d332..0a881d8 100644 --- a/configs/P5040DS_SDCARD_defconfig +++ b/configs/P5040DS_SDCARD_defconfig @@ -12,10 +12,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -39,6 +42,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -69,6 +81,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P5040DS_SPIFLASH_defconfig b/configs/P5040DS_SPIFLASH_defconfig index 172f5ed..0e4a545 100644 --- a/configs/P5040DS_SPIFLASH_defconfig +++ b/configs/P5040DS_SPIFLASH_defconfig @@ -13,10 +13,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -40,6 +43,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -70,6 +82,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P5040DS_defconfig b/configs/P5040DS_defconfig index 79c6e46..d614917 100644 --- a/configs/P5040DS_defconfig +++ b/configs/P5040DS_defconfig @@ -11,7 +11,10 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y @@ -35,6 +38,15 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xE8001001 +CONFIG_SYS_OR0_PRELIM=0xF8000F85 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0001001 +CONFIG_SYS_OR1_PRELIM=0xF8000FF7 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xFFDF0801 +CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_FSL=y @@ -65,6 +77,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig index 8988ed9..77f44f6 100644 --- a/configs/SBx81LIFKW_defconfig +++ b/configs/SBx81LIFKW_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/alliedtelesis/SBx81LIFKW/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00600000 CONFIG_TARGET_SBx81LIFKW=y CONFIG_ENV_SIZE=0x2000 @@ -30,11 +31,11 @@ CONFIG_DOS_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y @@ -45,16 +46,17 @@ CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y CONFIG_MV88E61XX_SWITCH=y CONFIG_MV88E61XX_CPU_PORT=10 CONFIG_MV88E61XX_PHY_PORTS=0x003 CONFIG_MV88E61XX_FIXED_PORTS=0x300 CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y +CONFIG_MVGBE=y CONFIG_MII=y CONFIG_DM_RTC=y CONFIG_RTC_MV=y +CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_KIRKWOOD_SPI=y diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig index cd491c4..b84e3bd 100644 --- a/configs/SBx81LIFXCAT_defconfig +++ b/configs/SBx81LIFXCAT_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00600000 CONFIG_TARGET_SBx81LIFXCAT=y CONFIG_ENV_SIZE=0x2000 @@ -32,11 +33,11 @@ CONFIG_DOS_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y @@ -49,14 +50,15 @@ CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y CONFIG_MV88E61XX_SWITCH=y CONFIG_MV88E61XX_CPU_PORT=10 CONFIG_MV88E61XX_PHY_PORTS=0x003 CONFIG_MV88E61XX_FIXED_PORTS=0x300 CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y +CONFIG_MVGBE=y CONFIG_MII=y +CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_KIRKWOOD_SPI=y diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig index 5e7116e..086e579 100644 --- a/configs/T1024RDB_NAND_defconfig +++ b/configs/T1024RDB_NAND_defconfig @@ -24,6 +24,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t102xrdb/t1024_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t102xrdb/t1024_nand_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -82,6 +84,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_STMICRO=y @@ -102,6 +106,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig index e5b129e..5afce38 100644 --- a/configs/T1024RDB_SDCARD_defconfig +++ b/configs/T1024RDB_SDCARD_defconfig @@ -24,6 +24,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t102xrdb/t1024_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t102xrdb/t1024_sd_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -99,6 +101,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig index bea7159..90d745b 100644 --- a/configs/T1024RDB_SPIFLASH_defconfig +++ b/configs/T1024RDB_SPIFLASH_defconfig @@ -26,6 +26,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t102xrdb/t1024_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t102xrdb/t1024_spi_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -101,6 +103,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig index 3ed1c6d..98f1d6c 100644 --- a/configs/T1024RDB_defconfig +++ b/configs/T1024RDB_defconfig @@ -14,6 +14,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -84,6 +86,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig index c447fef..ca22e1e 100644 --- a/configs/T1042D4RDB_NAND_defconfig +++ b/configs/T1042D4RDB_NAND_defconfig @@ -21,6 +21,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -76,6 +78,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_STMICRO=y @@ -90,6 +94,7 @@ CONFIG_FMAN_ENET=y CONFIG_SYS_FMAN_FW_ADDR=0x280000 CONFIG_MII=y CONFIG_PCIE_FSL=y +CONFIG_U_QE=y CONFIG_SYS_QE_FW_ADDR=0x380000 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y CONFIG_DM_RTC=y @@ -98,6 +103,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig index 92037c5..b9f7992 100644 --- a/configs/T1042D4RDB_SDCARD_defconfig +++ b/configs/T1042D4RDB_SDCARD_defconfig @@ -21,6 +21,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -86,6 +88,7 @@ CONFIG_FMAN_ENET=y CONFIG_SYS_FMAN_FW_ADDR=0x10400 CONFIG_MII=y CONFIG_PCIE_FSL=y +CONFIG_U_QE=y CONFIG_SYS_QE_FMAN_FW_IN_MMC=y CONFIG_DM_RTC=y CONFIG_SYS_NS16550=y @@ -93,6 +96,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig index 37b5fae..f8e2b6d 100644 --- a/configs/T1042D4RDB_SPIFLASH_defconfig +++ b/configs/T1042D4RDB_SPIFLASH_defconfig @@ -23,6 +23,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -88,6 +90,7 @@ CONFIG_FMAN_ENET=y CONFIG_SYS_FMAN_FW_ADDR=0x110000 CONFIG_MII=y CONFIG_PCIE_FSL=y +CONFIG_U_QE=y CONFIG_SYS_QE_FW_ADDR=0x130000 CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y CONFIG_DM_RTC=y @@ -96,6 +99,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig index f1ec400..4797f29 100644 --- a/configs/T1042D4RDB_defconfig +++ b/configs/T1042D4RDB_defconfig @@ -11,6 +11,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -71,6 +73,7 @@ CONFIG_FMAN_ENET=y CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000 CONFIG_MII=y CONFIG_PCIE_FSL=y +CONFIG_U_QE=y CONFIG_SYS_QE_FW_ADDR=0xEFF10000 CONFIG_SYS_QE_FMAN_FW_IN_NOR=y CONFIG_DM_RTC=y @@ -79,6 +82,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig index c39329b..ba07ce8 100644 --- a/configs/T2080QDS_NAND_defconfig +++ b/configs/T2080QDS_NAND_defconfig @@ -7,6 +7,10 @@ CONFIG_ENV_OFFSET=0x140000 CONFIG_DEFAULT_DEVICE_TREE="t2080qds" CONFIG_SPL_TEXT_BASE=0xFFFD8000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xqds_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y @@ -18,10 +22,13 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xqds/t208x_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xqds/t2080_nand_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_NAND_BOOT=y @@ -74,6 +81,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_EON=y @@ -96,6 +105,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig index 1075acf..bf5410b 100644 --- a/configs/T2080QDS_SDCARD_defconfig +++ b/configs/T2080QDS_SDCARD_defconfig @@ -7,6 +7,10 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="t2080qds" CONFIG_SPL_TEXT_BASE=0xFFFD8000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xqds_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y @@ -18,10 +22,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xqds/t208x_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xqds/t2080_sd_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_MMC_BOOT=y @@ -92,6 +99,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig index b761a1f..3165b90 100644 --- a/configs/T2080QDS_SECURE_BOOT_defconfig +++ b/configs/T2080QDS_SECURE_BOOT_defconfig @@ -4,6 +4,10 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_NXP_ESBC=y CONFIG_DEFAULT_DEVICE_TREE="t2080qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xqds_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_MPC85xx=y CONFIG_TARGET_T2080QDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y @@ -12,7 +16,10 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y @@ -76,6 +83,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig index 11a0ed4..367416f 100644 --- a/configs/T2080QDS_SPIFLASH_defconfig +++ b/configs/T2080QDS_SPIFLASH_defconfig @@ -8,6 +8,10 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DEFAULT_DEVICE_TREE="t2080qds" CONFIG_SPL_TEXT_BASE=0xFFFD8000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xqds_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y @@ -20,10 +24,13 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xqds/t208x_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xqds/t2080_spi_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_SPI_BOOT=y @@ -94,6 +101,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig index e3ff926..ef4d888 100644 --- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig @@ -3,6 +3,10 @@ CONFIG_SYS_TEXT_BASE=0xFFF40000 CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="t2080qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xqds_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_MPC85xx=y CONFIG_TARGET_T2080QDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y @@ -11,7 +15,10 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y @@ -69,6 +76,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig index d76547a..db9e970 100644 --- a/configs/T2080QDS_defconfig +++ b/configs/T2080QDS_defconfig @@ -4,6 +4,10 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="t2080qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xqds_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_MPC85xx=y CONFIG_TARGET_T2080QDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y @@ -11,7 +15,10 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y @@ -77,6 +84,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index 88f29f4..4501cf6 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -8,6 +8,10 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y @@ -23,6 +27,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_nand_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_NAND_BOOT=y @@ -80,6 +86,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_STMICRO=y @@ -104,6 +112,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index 07de4bc..f62c85c 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -8,6 +8,10 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y @@ -23,6 +27,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_sd_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_MMC_BOOT=y @@ -100,6 +106,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index ea43361..2a7529d 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -9,6 +9,10 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y @@ -25,6 +29,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_spi_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_SPI_BOOT=y @@ -102,6 +108,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 610f706..6b07640 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -5,6 +5,10 @@ CONFIG_SYS_MEMTEST_END=0x00400000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_MPC85xx=y CONFIG_TARGET_T2080RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y @@ -13,6 +17,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y @@ -83,6 +89,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig index ed7cf4f..cdd7524 100644 --- a/configs/T2080RDB_revD_NAND_defconfig +++ b/configs/T2080RDB_revD_NAND_defconfig @@ -8,6 +8,10 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y @@ -24,6 +28,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_nand_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_NAND_BOOT=y @@ -81,6 +87,8 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_STMICRO=y @@ -106,6 +114,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig index 0e80031..1771c24 100644 --- a/configs/T2080RDB_revD_SDCARD_defconfig +++ b/configs/T2080RDB_revD_SDCARD_defconfig @@ -8,6 +8,10 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y @@ -24,6 +28,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_sd_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_MMC_BOOT=y @@ -102,6 +108,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig index 00b19f5..bb9d5c8 100644 --- a/configs/T2080RDB_revD_SPIFLASH_defconfig +++ b/configs/T2080RDB_revD_SPIFLASH_defconfig @@ -9,6 +9,10 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y @@ -26,6 +30,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/t208xrdb/t2080_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_spi_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_SPI_BOOT=y @@ -104,6 +110,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig index f8f459f..472463f 100644 --- a/configs/T2080RDB_revD_defconfig +++ b/configs/T2080RDB_revD_defconfig @@ -5,6 +5,10 @@ CONFIG_SYS_MEMTEST_END=0x00400000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_MPC85xx=y CONFIG_TARGET_T2080RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y @@ -14,6 +18,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y @@ -86,6 +92,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig index bfd913a..526c474 100644 --- a/configs/T4240RDB_SDCARD_defconfig +++ b/configs/T4240RDB_SDCARD_defconfig @@ -6,6 +6,10 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="t4240rdb" CONFIG_SPL_TEXT_BASE=0xFFFD8000 +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t4240rdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y @@ -21,6 +25,8 @@ CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="$(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="$(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg" CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_SPL_MMC_BOOT=y @@ -86,6 +92,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig index c66b152..bbaab35 100644 --- a/configs/T4240RDB_defconfig +++ b/configs/T4240RDB_defconfig @@ -3,6 +3,10 @@ CONFIG_SYS_TEXT_BASE=0xEFF40000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="t4240rdb" +CONFIG_VID=y +CONFIG_VID_FLS_ENV="t4240rdb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y @@ -11,6 +15,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y @@ -71,6 +77,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/a3y17lte_defconfig b/configs/a3y17lte_defconfig index 6c87825..ddc1801 100644 --- a/configs/a3y17lte_defconfig +++ b/configs/a3y17lte_defconfig @@ -9,6 +9,8 @@ CONFIG_NR_DRAM_BANKS=8 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" CONFIG_SYS_LOAD_ADDR=0x40001000 CONFIG_FIT=y +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_GPIO=y diff --git a/configs/a5y17lte_defconfig b/configs/a5y17lte_defconfig index 2d8782e..2534ab0 100644 --- a/configs/a5y17lte_defconfig +++ b/configs/a5y17lte_defconfig @@ -9,6 +9,8 @@ CONFIG_NR_DRAM_BANKS=12 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" CONFIG_SYS_LOAD_ADDR=0x40001000 CONFIG_FIT=y +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_GPIO=y diff --git a/configs/a7y17lte_defconfig b/configs/a7y17lte_defconfig index 39b9741..a2d7637 100644 --- a/configs/a7y17lte_defconfig +++ b/configs/a7y17lte_defconfig @@ -9,6 +9,8 @@ CONFIG_NR_DRAM_BANKS=12 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" CONFIG_SYS_LOAD_ADDR=0x40001000 CONFIG_FIT=y +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_GPIO=y diff --git a/configs/adp-ae3xx_defconfig b/configs/adp-ae3xx_defconfig index 3fa00fb..b79b5b6f 100644 --- a/configs/adp-ae3xx_defconfig +++ b/configs/adp-ae3xx_defconfig @@ -7,6 +7,7 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x140000 CONFIG_ENV_SECT_SIZE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="ae3xx" +CONFIG_SYS_CLK_FREQ=39062500 CONFIG_TARGET_ADP_AE3XX=y CONFIG_SYS_LOAD_ADDR=0x300000 CONFIG_FIT=y diff --git a/configs/adp-ag101p_defconfig b/configs/adp-ag101p_defconfig index cc6541b..503f2ae 100644 --- a/configs/adp-ag101p_defconfig +++ b/configs/adp-ag101p_defconfig @@ -6,6 +6,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="ag101p" +CONFIG_SYS_CLK_FREQ=39062500 CONFIG_TARGET_ADP_AG101P=y CONFIG_SYS_LOAD_ADDR=0x300000 CONFIG_FIT=y diff --git a/configs/ae350_rv32_defconfig b/configs/ae350_rv32_defconfig index fe18a1c..0324f1e 100644 --- a/configs/ae350_rv32_defconfig +++ b/configs/ae350_rv32_defconfig @@ -17,7 +17,6 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y @@ -31,7 +30,6 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 diff --git a/configs/ae350_rv32_spl_defconfig b/configs/ae350_rv32_spl_defconfig index 9287544..2484d19 100644 --- a/configs/ae350_rv32_spl_defconfig +++ b/configs/ae350_rv32_spl_defconfig @@ -21,7 +21,6 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTP_SEND_HOSTNAME=y @@ -33,7 +32,6 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 diff --git a/configs/ae350_rv32_spl_xip_defconfig b/configs/ae350_rv32_spl_xip_defconfig index 18d114e..9f21084 100644 --- a/configs/ae350_rv32_spl_xip_defconfig +++ b/configs/ae350_rv32_spl_xip_defconfig @@ -23,7 +23,6 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTP_SEND_HOSTNAME=y @@ -35,7 +34,6 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 diff --git a/configs/ae350_rv32_xip_defconfig b/configs/ae350_rv32_xip_defconfig index 524996c..d69a585 100644 --- a/configs/ae350_rv32_xip_defconfig +++ b/configs/ae350_rv32_xip_defconfig @@ -31,7 +31,6 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 diff --git a/configs/ae350_rv64_defconfig b/configs/ae350_rv64_defconfig index 01016c2..c30763a 100644 --- a/configs/ae350_rv64_defconfig +++ b/configs/ae350_rv64_defconfig @@ -18,7 +18,6 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y @@ -32,7 +31,6 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 diff --git a/configs/ae350_rv64_spl_defconfig b/configs/ae350_rv64_spl_defconfig index 42b93f5..8ef8e91 100644 --- a/configs/ae350_rv64_spl_defconfig +++ b/configs/ae350_rv64_spl_defconfig @@ -22,7 +22,6 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTP_SEND_HOSTNAME=y @@ -34,7 +33,6 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 diff --git a/configs/ae350_rv64_spl_xip_defconfig b/configs/ae350_rv64_spl_xip_defconfig index 9071b7c..2bf3dd6 100644 --- a/configs/ae350_rv64_spl_xip_defconfig +++ b/configs/ae350_rv64_spl_xip_defconfig @@ -24,7 +24,6 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTP_SEND_HOSTNAME=y @@ -36,7 +35,6 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 diff --git a/configs/ae350_rv64_xip_defconfig b/configs/ae350_rv64_xip_defconfig index 190206f..e8dc447 100644 --- a/configs/ae350_rv64_xip_defconfig +++ b/configs/ae350_rv64_xip_defconfig @@ -32,7 +32,6 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index 492f7b9..90612e6 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -14,7 +14,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run findfdt; run usbboot;run mmcboot;setenv mmcdev 1; setenv bootpart 1:2; run mmcboot;run nandboot;" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_FS_EXT4=y diff --git a/configs/am335x_igep003x_defconfig b/configs/am335x_igep003x_defconfig index d46861c..2c0cd1a 100644 --- a/configs/am335x_igep003x_defconfig +++ b/configs/am335x_igep003x_defconfig @@ -16,7 +16,7 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run findfdt;run mmcboot;run nandboot;run netboot;" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig index ffadc90..1c4c711 100644 --- a/configs/am335x_pdu001_defconfig +++ b/configs/am335x_pdu001_defconfig @@ -19,7 +19,7 @@ CONFIG_BOOTDELAY=1 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run eval_boot_device;part uuid mmc ${mmc_boot}:${root_fs_partition} root_fs_partuuid;setenv bootargs console=${console} vt.global_cursor_default=0 root=PARTUUID=${root_fs_partuuid} rootfstype=ext4 rootwait rootdelay=1;fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};bootz ${loadaddr} - ${fdtaddr}" CONFIG_BOARD_LATE_INIT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig index 4169d13..f2a6108 100644 --- a/configs/am335x_shc_defconfig +++ b/configs/am335x_shc_defconfig @@ -22,7 +22,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if mmc dev 1; mmc rescan; then run emmc_setup; else echo ERROR: eMMC device not detected!; panic; fi; if run loaduimage; then run mmcboot; else echo ERROR Unable to load uImage from eMMC!; echo Performing Rollback!; setenv _active_ ${active_root}; setenv _inactive_ ${inactive_root}; setenv active_root ${_inactive_}; setenv inactive_root ${_active_}; saveenv; reset; fi; " CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig index 1d25adf..49e18d8 100644 --- a/configs/am335x_shc_ict_defconfig +++ b/configs/am335x_shc_ict_defconfig @@ -23,7 +23,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if mmc dev 0; mmc rescan; then run sd_setup; else echo ERROR: SD/MMC-Card not detected!; panic; fi; run fusecmd; " CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig index 0ab3acb..c63ffb7 100644 --- a/configs/am335x_shc_netboot_defconfig +++ b/configs/am335x_shc_netboot_defconfig @@ -23,7 +23,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run fusecmd; if run netboot; then echo Booting from network; else echo ERROR: Cannot boot from network!; panic; fi; " CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig index 914f21c..24409b8 100644 --- a/configs/am335x_shc_sdboot_defconfig +++ b/configs/am335x_shc_sdboot_defconfig @@ -23,7 +23,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if mmc dev 0; mmc rescan; then run sd_setup; else echo ERROR: SD/MMC-Card not detected!; panic; fi; if run loaduimage; then echo Bootable SD/MMC-Card inserted, booting from it!; run mmcboot; else echo ERROR: Unable to load uImage from SD/MMC-Card!; panic; fi; " CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index c24986c..75e6589 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=10 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device $mmcdev; if run loadbootenv; then run importbootenv; fi; echo Checking if uenvcmd is set ...; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; echo Running default loadimage ...; setenv bootfile zImage; if run loadimage; then run loadfdt; run mmcboot; fi; else run nandboot; fi" CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 79f949f..9b24b60 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -21,7 +21,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; " CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig index 608982a..7d9e254 100644 --- a/configs/am57xx_hs_evm_defconfig +++ b/configs/am57xx_hs_evm_defconfig @@ -26,7 +26,7 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; " CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig index 99496e3..7f19d99 100644 --- a/configs/am57xx_hs_evm_usb_defconfig +++ b/configs/am57xx_hs_evm_usb_defconfig @@ -29,7 +29,7 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; " CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig index aafbb41..3ce2129 100644 --- a/configs/am64x_evm_a53_defconfig +++ b/configs/am64x_evm_a53_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_K3=y CONFIG_SYS_MALLOC_LEN=0x2000000 CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 @@ -11,6 +12,7 @@ CONFIG_K3_ATF_LOAD_ADDR=0x701c0000 CONFIG_TARGET_AM642_A53_EVM=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x680000 +CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="k3-am642-evm" CONFIG_SPL_TEXT_BASE=0x80080000 @@ -70,9 +72,13 @@ CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y +CONFIG_SPL_CLK_CCF=y +CONFIG_CLK_CCF=y CONFIG_CLK_TI_SCI=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y @@ -96,10 +102,16 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_MULTIPLEXER=y +CONFIG_MUX_MMIO=y CONFIG_PHY_TI_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_TI_AM65_CPSW_NUSS=y +CONFIG_PHY=y +CONFIG_SPL_PHY=y +CONFIG_PHY_CADENCE_TORRENT=y +CONFIG_PHY_J721E_WIZ=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_SINGLE=y diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig index f564fa0..2b609ad 100644 --- a/configs/am64x_evm_r5_defconfig +++ b/configs/am64x_evm_r5_defconfig @@ -25,6 +25,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y @@ -76,9 +78,13 @@ CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y +CONFIG_SPL_CLK_CCF=y +CONFIG_CLK_CCF=y CONFIG_CLK_TI_SCI=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y @@ -97,6 +103,11 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHY=y +CONFIG_SPL_PHY=y +CONFIG_PHY_CADENCE_SIERRA=y +CONFIG_PHY_CADENCE_TORRENT=y +CONFIG_PHY_J721E_WIZ=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set CONFIG_SPL_PINCTRL=y diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig index 1170dd3..afb3a77 100644 --- a/configs/amcore_defconfig +++ b/configs/amcore_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="amcore" CONFIG_TARGET_AMCORE=y CONFIG_SYS_LOAD_ADDR=0x20000 CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="bootm ffc20000" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMDLINE_EDITING is not set diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig index 0206aaa..3af41e8 100644 --- a/configs/ap121_defconfig +++ b/configs/ap121_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe;mtdparts default;bootm 0x9f650000" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="ap121 # " @@ -38,7 +40,6 @@ CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6144k(rootfs),1600k(uImage),64k(NVRAM),64k(ART)" # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=25000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/ap143_defconfig b/configs/ap143_defconfig index 639265d..17aeda4 100644 --- a/configs/ap143_defconfig +++ b/configs/ap143_defconfig @@ -18,6 +18,8 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe;mtdparts default;bootm 0x9f680000" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="ap143 # " @@ -37,7 +39,6 @@ CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1472k(uImage),64k(ART)" # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=25000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set diff --git a/configs/ap152_defconfig b/configs/ap152_defconfig index fd69ad5..3aa0ea5 100644 --- a/configs/ap152_defconfig +++ b/configs/ap152_defconfig @@ -18,6 +18,8 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe;mtdparts default;bootm 0x9f060000" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="ap152 # " @@ -37,6 +39,7 @@ CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1472k(uImage),64k(ART)" # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_SPI_MAX_HZ=25000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set CONFIG_MTD=y diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index 659e58f..9645c2f 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index b5c846a..878bbf8 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -27,6 +27,7 @@ CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=1 +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y @@ -105,6 +106,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 59e5113..86d48eb 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/configs/aristainetos2c_defconfig b/configs/aristainetos2c_defconfig index ad4e835..27607d2 100644 --- a/configs/aristainetos2c_defconfig +++ b/configs/aristainetos2c_defconfig @@ -109,6 +109,7 @@ CONFIG_SYSRESET_WATCHDOG=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_DISPLAY=y CONFIG_VIDEO_IPUV3=y diff --git a/configs/aristainetos2ccslb_defconfig b/configs/aristainetos2ccslb_defconfig index e4ecd81..bfc967b 100644 --- a/configs/aristainetos2ccslb_defconfig +++ b/configs/aristainetos2ccslb_defconfig @@ -109,6 +109,7 @@ CONFIG_SYSRESET_WATCHDOG=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_DISPLAY=y CONFIG_VIDEO_IPUV3=y diff --git a/configs/armadillo-800eva_defconfig b/configs/armadillo-800eva_defconfig index 4a72ae4..2f5c115 100644 --- a/configs/armadillo-800eva_defconfig +++ b/configs/armadillo-800eva_defconfig @@ -11,6 +11,7 @@ CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_ARCH_RMOBILE_BOARD_STRING="Armadillo-800EVA Board" CONFIG_R8A7740=y CONFIG_TARGET_ARMADILLO_800EVA=y +CONFIG_SYS_CLK_FREQ=50000000 CONFIG_SYS_LOAD_ADDR=0x44000000 CONFIG_BOOTDELAY=3 # CONFIG_CMDLINE_EDITING is not set diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig index 39910c5..a97c4ff 100644 --- a/configs/astro_mcf5373l_defconfig +++ b/configs/astro_mcf5373l_defconfig @@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0x20000 CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS=" console=ttyS2,115200 rootfstype=romfs loaderversion=$loaderversion" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="protect off 0x80000 0x1ffffff;run env_check;run xilinxload&&run alteraload&&bootm 0x80000;update;reset" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y @@ -38,3 +40,4 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_MCFUART=y +CONFIG_WATCHDOG=y diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig b/configs/at91sam9260ek_dataflash_cs0_defconfig index de28327..ebcf14d 100644 --- a/configs/at91sam9260ek_dataflash_cs0_defconfig +++ b/configs/at91sam9260ek_dataflash_cs0_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS0" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set @@ -35,7 +37,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig index d68c279..7b9e0a4 100644 --- a/configs/at91sam9260ek_dataflash_cs1_defconfig +++ b/configs/at91sam9260ek_dataflash_cs1_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:1; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set @@ -35,7 +37,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig index 04cbcf9..6e7da85 100644 --- a/configs/at91sam9260ek_nandflash_defconfig +++ b/configs/at91sam9260ek_nandflash_defconfig @@ -19,6 +19,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig index bb97f2d..5ec1e61 100644 --- a/configs/at91sam9261ek_dataflash_cs0_defconfig +++ b/configs/at91sam9261ek_dataflash_cs0_defconfig @@ -20,6 +20,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS0" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " @@ -34,7 +36,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig index 0defac9..94c2834 100644 --- a/configs/at91sam9261ek_dataflash_cs3_defconfig +++ b/configs/at91sam9261ek_dataflash_cs3_defconfig @@ -20,6 +20,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:3; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " @@ -34,7 +36,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig index 3ec505a..ed2b04b 100644 --- a/configs/at91sam9261ek_nandflash_defconfig +++ b/configs/at91sam9261ek_nandflash_defconfig @@ -18,6 +18,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig index d407496..29b3923 100644 --- a/configs/at91sam9263ek_dataflash_cs0_defconfig +++ b/configs/at91sam9263ek_dataflash_cs0_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -38,7 +40,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig index d407496..29b3923 100644 --- a/configs/at91sam9263ek_dataflash_defconfig +++ b/configs/at91sam9263ek_dataflash_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -38,7 +40,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig index 589fc1d..4551cfd 100644 --- a/configs/at91sam9263ek_nandflash_defconfig +++ b/configs/at91sam9263ek_nandflash_defconfig @@ -19,6 +19,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig index 31c2e7d..f4d5dba 100644 --- a/configs/at91sam9g10ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig @@ -20,6 +20,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " @@ -34,7 +36,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9g10ek_dataflash_cs3_defconfig b/configs/at91sam9g10ek_dataflash_cs3_defconfig index 6c5737c..72228b5 100644 --- a/configs/at91sam9g10ek_dataflash_cs3_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig @@ -20,6 +20,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS3" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:3; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " @@ -34,7 +36,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig index ac8cb51..293683c 100644 --- a/configs/at91sam9g10ek_nandflash_defconfig +++ b/configs/at91sam9g10ek_nandflash_defconfig @@ -18,6 +18,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig index 33d5e59..97057b5 100644 --- a/configs/at91sam9g20ek_2mmc_defconfig +++ b/configs/at91sam9g20ek_2mmc_defconfig @@ -20,6 +20,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x22000000 uImage; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig index 95b96c9..cb381e2 100644 --- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig +++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig @@ -19,6 +19,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set diff --git a/configs/at91sam9g20ek_dataflash_cs0_defconfig b/configs/at91sam9g20ek_dataflash_cs0_defconfig index 12d7fd3..cff3b1a 100644 --- a/configs/at91sam9g20ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs0_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS0" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set @@ -35,7 +37,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig index 32128fb..350faaf 100644 --- a/configs/at91sam9g20ek_dataflash_cs1_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS1" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:1; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set @@ -35,7 +37,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig index 851f15e..ef37695 100644 --- a/configs/at91sam9g20ek_nandflash_defconfig +++ b/configs/at91sam9g20ek_nandflash_defconfig @@ -19,6 +19,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig index 71ca5d3..21ad962 100644 --- a/configs/at91sam9m10g45ek_mmc_defconfig +++ b/configs/at91sam9m10g45ek_mmc_defconfig @@ -18,6 +18,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x71000000 dtb; fatload mmc 0:1 0x72000000 zImage; bootz 0x72000000 - 0x71000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig index 0437cb7..695b4c5 100644 --- a/configs/at91sam9m10g45ek_nandflash_defconfig +++ b/configs/at91sam9m10g45ek_nandflash_defconfig @@ -18,6 +18,8 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig index e82d9ab..998bacf 100644 --- a/configs/at91sam9n12ek_mmc_defconfig +++ b/configs/at91sam9n12ek_mmc_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};fatload mmc 0:1 0x21000000 dtb;fatload mmc 0:1 0x22000000 uImage;bootm 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index 984289f..90a832a 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_nand};nand read 0x21000000 0x180000 0x080000;nand read 0x22000000 0x200000 0x400000;bootm 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig index 5a9b5c2..e704ee0 100644 --- a/configs/at91sam9n12ek_spiflash_defconfig +++ b/configs/at91sam9n12ek_spiflash_defconfig @@ -17,6 +17,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_nand};sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig index 32d73e6..9943b86 100644 --- a/configs/at91sam9rlek_dataflash_defconfig +++ b/configs/at91sam9rlek_dataflash_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_DATAFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -36,7 +38,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig index c8bb88e..9fd2042 100644 --- a/configs/at91sam9rlek_mmc_defconfig +++ b/configs/at91sam9rlek_mmc_defconfig @@ -19,6 +19,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig index 677c0ae..a922780 100644 --- a/configs/at91sam9rlek_nandflash_defconfig +++ b/configs/at91sam9rlek_nandflash_defconfig @@ -19,6 +19,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000 0x180000 0x80000; bootz 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig index 5a47339..f00f3c8 100644 --- a/configs/at91sam9x5ek_dataflash_defconfig +++ b/configs/at91sam9x5ek_dataflash_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig index e919b81..124c58d 100644 --- a/configs/at91sam9x5ek_nandflash_defconfig +++ b/configs/at91sam9x5ek_nandflash_defconfig @@ -19,6 +19,8 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000 0x180000 0x20000; bootz 0x22000000 - 0x21000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig index 3a74e10..4eecdf3 100644 --- a/configs/at91sam9x5ek_spiflash_defconfig +++ b/configs/at91sam9x5ek_spiflash_defconfig @@ -21,6 +21,8 @@ CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig index 6f9bd2c..28479b9 100644 --- a/configs/at91sam9xeek_dataflash_cs0_defconfig +++ b/configs/at91sam9xeek_dataflash_cs0_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS0" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set @@ -35,7 +37,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig index 6b7f8e0..5072a9b 100644 --- a/configs/at91sam9xeek_dataflash_cs1_defconfig +++ b/configs/at91sam9xeek_dataflash_cs1_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:1; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set @@ -35,7 +37,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig index 04e761f..fa7f052 100644 --- a/configs/at91sam9xeek_nandflash_defconfig +++ b/configs/at91sam9xeek_nandflash_defconfig @@ -19,6 +19,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index 3609fd9..55aa939 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -14,6 +14,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_ZYNQ_MAC_IN_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa +CONFIG_ZYNQMP_PSU_INIT_ENABLED=y CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x8000000 diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index 95a9135..40743ea 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -21,6 +21,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/bcm7260_defconfig b/configs/bcm7260_defconfig index 257d810..c3fff0f 100644 --- a/configs/bcm7260_defconfig +++ b/configs/bcm7260_defconfig @@ -7,6 +7,7 @@ CONFIG_TARGET_BCM7260=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x814800 +CONFIG_DEFAULT_DEVICE_TREE="bcm7xxx" CONFIG_ENV_OFFSET_REDUND=0x824800 CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_FIT=y @@ -26,7 +27,6 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FS_GENERIC=y CONFIG_DOS_PARTITION=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y @@ -35,4 +35,5 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCMSTB=y CONFIG_MTD=y +CONFIG_SYS_NS16550=y # CONFIG_EFI_LOADER is not set diff --git a/configs/bcm7445_defconfig b/configs/bcm7445_defconfig index 9ffa436..46909e9 100644 --- a/configs/bcm7445_defconfig +++ b/configs/bcm7445_defconfig @@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=3 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x1E0000 CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DEFAULT_DEVICE_TREE="bcm7xxx" CONFIG_ENV_OFFSET_REDUND=0x1F0000 CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_FIT=y @@ -27,7 +28,6 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FS_GENERIC=y CONFIG_DOS_PARTITION=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y @@ -37,6 +37,9 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCMSTB=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_BCMSTB_SPI=y diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index 1305434..86ef5e3 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -14,6 +14,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run flash_pending_rfs_imgs;run fastboot_nitro && run bootcmd_mmc_fits || run bootcmd_usb || run bootcmd_pxe" CONFIG_LOGLEVEL=7 CONFIG_SILENT_CONSOLE=y CONFIG_SILENT_U_BOOT_ONLY=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 3db8004..8aa8438 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig index 4cd6a7c..ffeee33 100644 --- a/configs/bitmain_antminer_s9_defconfig +++ b/configs/bitmain_antminer_s9_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_VENDOR="bitmain" CONFIG_SYS_BOARD="antminer_s9" CONFIG_SYS_CONFIG_NAME="bitmain_antminer_s9" CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_ENV_OFFSET=0x300000 diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig index 1000cc9..1cee130 100644 --- a/configs/bk4r1_defconfig +++ b/configs/bk4r1_defconfig @@ -23,6 +23,8 @@ CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter passphrase to stop autoboot, booting in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR="123" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run set_gpio122; run set_gpio96; sf probe; run manage_userdata; run bootcmd_nand" CONFIG_USE_PREBOOT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index 47995ea..a2126ee 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig index 10d1194..197d462 100644 --- a/configs/cei-tk1-som_defconfig +++ b/configs/cei-tk1-som_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig index f69b566..91b309a 100644 --- a/configs/cgtqmx8_defconfig +++ b/configs/cgtqmx8_defconfig @@ -21,11 +21,16 @@ CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=0 CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/cherryhill_defconfig b/configs/cherryhill_defconfig index c323103..73120b5 100644 --- a/configs/cherryhill_defconfig +++ b/configs/cherryhill_defconfig @@ -13,6 +13,8 @@ CONFIG_DEBUG_UART=y CONFIG_SMP=y CONFIG_GENERATE_MP_TABLE=y CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig index a024fe7..023cd19 100644 --- a/configs/chiliboard_defconfig +++ b/configs/chiliboard_defconfig @@ -17,7 +17,7 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=1 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run mmcboot; run nandboot; run netboot" CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig index 80ed1f0..091b060 100644 --- a/configs/chromebit_mickey_defconfig +++ b/configs/chromebit_mickey_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_ARCH_TIMER=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00100000 @@ -61,6 +62,7 @@ CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_I2C_MUX=y CONFIG_DM_KEYBOARD=y +CONFIG_KEYBOARD=y CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y diff --git a/configs/chromebook_coral_defconfig b/configs/chromebook_coral_defconfig index 321ad7d..785314a 100644 --- a/configs/chromebook_coral_defconfig +++ b/configs/chromebook_coral_defconfig @@ -6,6 +6,7 @@ CONFIG_MAX_CPUS=8 CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="chromebook_coral" CONFIG_SPL_TEXT_BASE=0xfef10000 +CONFIG_TPL_TEXT_BASE=0xffff8000 CONFIG_SPL_SYS_MALLOC_F_LEN=0xf000 CONFIG_BOOTSTAGE_STASH_ADDR=0xfef00000 CONFIG_DEBUG_UART_BOARD_INIT=y @@ -31,6 +32,8 @@ CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=10 CONFIG_BOOTSTAGE_STASH=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS_SUBST=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tpm init; tpm startup TPM2_SU_CLEAR; read mmc 0:2 100000 0 80; setexpr loader *001004f0; setexpr size *00100518; setexpr blocks $size / 200; read mmc 0:2 100000 80 $blocks; setexpr setup $loader - 1000; setexpr cmdline_ptr $loader - 2000; setexpr.s cmdline *$cmdline_ptr; setexpr cmdline gsub %U \\\\${uuid}; if part uuid mmc 0:2 uuid; then zboot start 100000 0 0 0 $setup cmdline; zboot load; zboot setup; zboot dump; zboot go;fi" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig index 85f6120..521795d 100644 --- a/configs/chromebook_jerry_defconfig +++ b/configs/chromebook_jerry_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_ARCH_TIMER=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00100000 @@ -63,6 +64,7 @@ CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_I2C_MUX=y CONFIG_DM_KEYBOARD=y +CONFIG_KEYBOARD=y CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig index c43d9dc..7059be8 100644 --- a/configs/chromebook_link64_defconfig +++ b/configs/chromebook_link64_defconfig @@ -26,6 +26,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index ad9e9dd..a6efb19 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -21,6 +21,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig index 41a3fe1..41a9e7f 100644 --- a/configs/chromebook_minnie_defconfig +++ b/configs/chromebook_minnie_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_ARCH_TIMER=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00100000 @@ -63,6 +64,7 @@ CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_I2C_MUX=y CONFIG_DM_KEYBOARD=y +CONFIG_KEYBOARD=y CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y diff --git a/configs/chromebook_samus_defconfig b/configs/chromebook_samus_defconfig index ef36d08..fc1292b 100644 --- a/configs/chromebook_samus_defconfig +++ b/configs/chromebook_samus_defconfig @@ -21,6 +21,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/chromebook_samus_tpl_defconfig b/configs/chromebook_samus_tpl_defconfig index b231b3b..c3c133b 100644 --- a/configs/chromebook_samus_tpl_defconfig +++ b/configs/chromebook_samus_tpl_defconfig @@ -8,6 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x1000 CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="chromebook_samus" CONFIG_SPL_TEXT_BASE=0xffe70000 +CONFIG_TPL_TEXT_BASE=0xfffd8000 CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_DEBUG_UART_BASE=0x3f8 CONFIG_DEBUG_UART_CLOCK=1843200 @@ -24,6 +25,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/chromebook_speedy_defconfig b/configs/chromebook_speedy_defconfig index b396d9f..03dfc68 100644 --- a/configs/chromebook_speedy_defconfig +++ b/configs/chromebook_speedy_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_ARCH_TIMER=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00100000 @@ -62,6 +63,7 @@ CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_I2C_MUX=y CONFIG_DM_KEYBOARD=y +CONFIG_KEYBOARD=y CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index 5f11c59..748a0e7 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -17,6 +17,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/ci20_mmc_defconfig b/configs/ci20_mmc_defconfig index 3c45520..9622157 100644 --- a/configs/ci20_mmc_defconfig +++ b/configs/ci20_mmc_defconfig @@ -24,6 +24,8 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y # CONFIG_SPL_BANNER_PRINT is not set +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1c CONFIG_SPL_MMC_TINY=y CONFIG_HUSH_PARSER=y CONFIG_CMD_DM=y @@ -35,6 +37,7 @@ CONFIG_CMD_FAT=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_VERSION_VARIABLE=y # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_JZ4780_EFUSE=y diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig index faad487..3de5284 100644 --- a/configs/cl-som-imx7_defconfig +++ b/configs/cl-som-imx7_defconfig @@ -22,6 +22,8 @@ CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="echo SD boot attempt ...; run sdbootscript; run sdboot; echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; echo USB boot attempt ...; run usbbootscript; " CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80 diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index b823a15..4e7f152 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -106,6 +106,7 @@ CONFIG_USB=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_VIDEO_IPUV3=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SOURCE=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index 0d87d26..d8aab58 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -21,7 +21,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="mmc dev 0; if mmc rescan; then if run loadbootscript; then run bootscript; fi; fi; mmc dev 1; if mmc rescan; then run emmcboot; fi;" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/cobra5272_defconfig b/configs/cobra5272_defconfig index 7ae7ff3..ff81f76 100644 --- a/configs/cobra5272_defconfig +++ b/configs/cobra5272_defconfig @@ -18,6 +18,30 @@ CONFIG_CMD_IMLS=y CONFIG_CMD_PING=y CONFIG_ENV_ADDR=0xFFE04000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFFE00201 +CONFIG_SYS_OR0_PRELIM=0xFFE00014 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0x0 +CONFIG_SYS_OR1_PRELIM=0x0 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0x0 +CONFIG_SYS_OR2_PRELIM=0x0 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0x0 +CONFIG_SYS_OR3_PRELIM=0x0 +CONFIG_SYS_BR4_PRELIM_BOOL=y +CONFIG_SYS_BR4_PRELIM=0x0 +CONFIG_SYS_OR4_PRELIM=0x0 +CONFIG_SYS_BR5_PRELIM_BOOL=y +CONFIG_SYS_BR5_PRELIM=0x0 +CONFIG_SYS_OR5_PRELIM=0x0 +CONFIG_SYS_BR6_PRELIM_BOOL=y +CONFIG_SYS_BR6_PRELIM=0x0 +CONFIG_SYS_OR6_PRELIM=0x0 +CONFIG_SYS_BR7_PRELIM_BOOL=y +CONFIG_SYS_BR7_PRELIM=0x701 +CONFIG_SYS_OR7_PRELIM=0xFF00007C CONFIG_MTD_NOR_FLASH=y CONFIG_DM_ETH=y CONFIG_MCFFEC=y diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig index 4b346a9..6374be3 100644 --- a/configs/colibri-imx6ull-emmc_defconfig +++ b/configs/colibri-imx6ull-emmc_defconfig @@ -14,7 +14,6 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri-emmc" CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=1 -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb" # CONFIG_CONSOLE_MUX is not set @@ -80,6 +79,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig index 7d15b7b..21b0aee 100644 --- a/configs/colibri-imx6ull_defconfig +++ b/configs/colibri-imx6ull_defconfig @@ -15,7 +15,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri" CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=1 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run ubiboot || run distro_bootcmd;" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb" # CONFIG_CONSOLE_MUX is not set @@ -95,6 +95,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 1f3c0f1..683a8e1 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=1 +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y @@ -103,6 +104,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index 129f625..da0d06b 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -14,7 +14,7 @@ CONFIG_IMX_BOOTAUX=y CONFIG_IMX_HAB=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=1 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run ubiboot ; echo ; echo ubiboot failed ; run distro_bootcmd;" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdtfile ${soc}-colibri-${fdt_board}.dtb " # CONFIG_CONSOLE_MUX is not set @@ -91,6 +91,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig index c06ef33..a8080a3 100644 --- a/configs/colibri_imx7_emmc_defconfig +++ b/configs/colibri_imx7_emmc_defconfig @@ -16,7 +16,6 @@ CONFIG_IMX_HAB=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=1 -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb" # CONFIG_CONSOLE_MUX is not set @@ -85,6 +84,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67 CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig index ee5b31d..f13170c 100644 --- a/configs/colibri_pxa270_defconfig +++ b/configs/colibri_pxa270_defconfig @@ -12,6 +12,8 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_LOAD_ADDR=0xa0000000 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if fatload mmc 0 0xa0000000 uImage; then bootm 0xa0000000; fi; if usb reset && fatload usb 0 0xa0000000 uImage; then bootm 0xa0000000; fi; bootm 0xc0000;" CONFIG_SYS_DEVICE_NULLDEV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index 88ee270..b883fc1 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_SYS_MALLOC_F_LEN=0x2000 @@ -21,7 +22,6 @@ CONFIG_SYS_PROMPT="Colibri T20 # " CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_NFS is not set @@ -48,6 +48,7 @@ CONFIG_SYS_I2C_TEGRA=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_TEGRA_NAND=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_DM_PMIC=y diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index 3c37341..abbc066 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index 4306ff4..350e1cf 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -16,6 +16,8 @@ CONFIG_TARGET_COLIBRI_VF=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_LOAD_ADDR=0x80008000 CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run ubiboot || run distro_bootcmd;" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdtfile ${soc}-colibri-${fdt_board}.dtb" CONFIG_LOGLEVEL=3 @@ -97,6 +99,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP16 is not set CONFIG_VIDEO_FSL_DCU_FB=y diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig index f4ee9fe..d35221c 100644 --- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig +++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig @@ -26,6 +26,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sda2 ro quiet" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="load scsi 0:2 03000000 /boot/vmlinuz-${kernel-ver}-generic;load scsi 0:2 04000000 /boot/initrd.img-${kernel-ver}-generic;run boot" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/conga-qeval20-qa3-e3845_defconfig b/configs/conga-qeval20-qa3-e3845_defconfig index 203306d..98015a8 100644 --- a/configs/conga-qeval20-qa3-e3845_defconfig +++ b/configs/conga-qeval20-qa3-e3845_defconfig @@ -22,6 +22,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sda2 ro quiet" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="load scsi 0:2 03000000 /boot/vmlinuz-${kernel-ver}-generic;load scsi 0:2 04000000 /boot/initrd.img-${kernel-ver}-generic;run boot" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index 13f093f..d6844a4 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if env exists keyprogram; then; setenv keyprogram; run nfsboot; fi; run dobootfail" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -52,7 +54,6 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_EFI_PARTITION=y CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_OF_TRANSLATE=y diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig index 799a83c..8146569 100644 --- a/configs/coreboot64_defconfig +++ b/configs/coreboot64_defconfig @@ -13,6 +13,8 @@ CONFIG_FIT_SIGNATURE=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig index 131de75..a12e4cd 100644 --- a/configs/coreboot_defconfig +++ b/configs/coreboot_defconfig @@ -11,6 +11,8 @@ CONFIG_FIT_SIGNATURE=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/cortina_presidio-asic-base_defconfig b/configs/cortina_presidio-asic-base_defconfig index 426c338..a6d7178 100644 --- a/configs/cortina_presidio-asic-base_defconfig +++ b/configs/cortina_presidio-asic-base_defconfig @@ -9,6 +9,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig index a96e251..8ba4b67 100644 --- a/configs/cortina_presidio-asic-emmc_defconfig +++ b/configs/cortina_presidio-asic-emmc_defconfig @@ -9,6 +9,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_R=y diff --git a/configs/cortina_presidio-asic-pnand_defconfig b/configs/cortina_presidio-asic-pnand_defconfig index 8694750..83e3aea 100644 --- a/configs/cortina_presidio-asic-pnand_defconfig +++ b/configs/cortina_presidio-asic-pnand_defconfig @@ -9,6 +9,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index 2f3803a..d448113 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -24,6 +24,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y @@ -59,6 +61,7 @@ CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 diff --git a/configs/cougarcanyon2_defconfig b/configs/cougarcanyon2_defconfig index b771a2a..073807b 100644 --- a/configs/cougarcanyon2_defconfig +++ b/configs/cougarcanyon2_defconfig @@ -15,6 +15,8 @@ CONFIG_GENERATE_MP_TABLE=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index 58c370a..650d768 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -17,6 +17,8 @@ CONFIG_FIT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/crs305-1g-4s-bit_defconfig b/configs/crs305-1g-4s-bit_defconfig index bf61860..ff8f413 100644 --- a/configs/crs305-1g-4s-bit_defconfig +++ b/configs/crs305-1g-4s-bit_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_MVEBU=y +CONFIG_SYS_KWD_CONFIG="board/mikrotik/crs3xx-98dx3236/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00800000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CRS3XX_98DX3236=y diff --git a/configs/crs305-1g-4s_defconfig b/configs/crs305-1g-4s_defconfig index 5fc8058..a71b642 100644 --- a/configs/crs305-1g-4s_defconfig +++ b/configs/crs305-1g-4s_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_MVEBU=y +CONFIG_SYS_KWD_CONFIG="board/mikrotik/crs3xx-98dx3236/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00800000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CRS3XX_98DX3236=y diff --git a/configs/crs326-24g-2s-bit_defconfig b/configs/crs326-24g-2s-bit_defconfig index 3de2949..c0746be 100644 --- a/configs/crs326-24g-2s-bit_defconfig +++ b/configs/crs326-24g-2s-bit_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_MVEBU=y +CONFIG_SYS_KWD_CONFIG="board/mikrotik/crs3xx-98dx3236/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00800000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CRS3XX_98DX3236=y diff --git a/configs/crs326-24g-2s_defconfig b/configs/crs326-24g-2s_defconfig index 77296ab..344f1b0 100644 --- a/configs/crs326-24g-2s_defconfig +++ b/configs/crs326-24g-2s_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_MVEBU=y +CONFIG_SYS_KWD_CONFIG="board/mikrotik/crs3xx-98dx3236/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00800000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CRS3XX_98DX3236=y diff --git a/configs/crs328-4c-20s-4s-bit_defconfig b/configs/crs328-4c-20s-4s-bit_defconfig index 513cc52..edfd0a4 100644 --- a/configs/crs328-4c-20s-4s-bit_defconfig +++ b/configs/crs328-4c-20s-4s-bit_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_MVEBU=y +CONFIG_SYS_KWD_CONFIG="board/mikrotik/crs3xx-98dx3236/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00800000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CRS3XX_98DX3236=y diff --git a/configs/crs328-4c-20s-4s_defconfig b/configs/crs328-4c-20s-4s_defconfig index dd0cd63..d6f9353 100644 --- a/configs/crs328-4c-20s-4s_defconfig +++ b/configs/crs328-4c-20s-4s_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_MVEBU=y +CONFIG_SYS_KWD_CONFIG="board/mikrotik/crs3xx-98dx3236/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00800000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CRS3XX_98DX3236=y diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index d32a9af..a856202 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/LaCie/net2big_v2/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NET2BIG_V2=y @@ -13,10 +14,11 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-d2net" CONFIG_IDENT_STRING=" D2 v2" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp && run netconsole; if run usbload || run diskload; then bootm; fi" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -40,12 +42,12 @@ CONFIG_EFI_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x0 diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index 33d1cf3..0c27677 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -24,7 +24,10 @@ CONFIG_SPL_SPI=y CONFIG_LTO=y CONFIG_SYS_LOAD_ADDR=0xc0700000 CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run envboot; run mmcboot; " CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index 21ac042..694e17c 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -15,9 +15,12 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="da850-evm" CONFIG_LTO=y CONFIG_SYS_LOAD_ADDR=0xc0700000 +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run envboot; run mmcboot; " # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig index aef30ae..aeb9c35 100644 --- a/configs/da850evm_nand_defconfig +++ b/configs/da850evm_nand_defconfig @@ -22,7 +22,10 @@ CONFIG_SPL_SPI=y CONFIG_LTO=y CONFIG_SYS_LOAD_ADDR=0xc0700000 CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run envboot; run mmcboot; " CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 399cecb..03f9384 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/db-88f6720_defconfig b/configs/db-88f6720_defconfig index dfc27ba..32a7349 100644 --- a/configs/db-88f6720_defconfig +++ b/configs/db-88f6720_defconfig @@ -41,7 +41,6 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y # CONFIG_DOS_PARTITION is not set CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig index 54edfff..9c54e7f 100644 --- a/configs/db-88f6820-amc_defconfig +++ b/configs/db-88f6820-amc_defconfig @@ -45,7 +45,6 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_OF_TRANSLATE=y diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig index 8435f15..90fd8e8 100644 --- a/configs/db-88f6820-gp_defconfig +++ b/configs/db-88f6820-gp_defconfig @@ -44,7 +44,6 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_OF_TRANSLATE=y diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig index b82b637..3d0b06f 100644 --- a/configs/db-mv784mp-gp_defconfig +++ b/configs/db-mv784mp-gp_defconfig @@ -45,15 +45,12 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_SATA_MV=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/db-xc3-24g4xg_defconfig b/configs/db-xc3-24g4xg_defconfig index b2ee2c2..3c0b045 100644 --- a/configs/db-xc3-24g4xg_defconfig +++ b/configs/db-xc3-24g4xg_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_MVEBU=y +CONFIG_SYS_KWD_CONFIG="board/Marvell/db-xc3-24g4xg/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x00800000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SYS_MEMTEST_START=0x00800000 diff --git a/configs/deneb_defconfig b/configs/deneb_defconfig index c51d6a3..572d744 100644 --- a/configs/deneb_defconfig +++ b/configs/deneb_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x2000 +CONFIG_IDENT_STRING=" ##v01.06" CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" CONFIG_SYS_LOAD_ADDR=0x80280000 @@ -28,11 +29,15 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" CONFIG_AUTOBOOT_KEYED_CTRLC=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 47f730c..af17900 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -18,6 +18,8 @@ CONFIG_SYS_LOAD_ADDR=0x80008000 CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp; tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; setenv bootargs ${bootargs} ${nfsargs} ${userargs}; bootm ${loadaddr} - ${dtbaddr}" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y @@ -41,6 +43,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_VERSION_VARIABLE=y CONFIG_DMA_LPC32XX=y +CONFIG_LPC32XX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_LPC32XX=y diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 19ceae1..4034f9c 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -7,7 +7,7 @@ CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_TARGET_DEVKIT8000=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run autoboot" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -27,6 +27,9 @@ CONFIG_CMD_NAND_LOCK_UNLOCK=y CONFIG_BOOTP_DNS2=y CONFIG_BOOTP_NTPSERVER=y CONFIG_CMD_JFFS2=y +CONFIG_JFFS2_DEV="nand0" +CONFIG_JFFS2_PART_OFFSET=0x680000 +CONFIG_JFFS2_PART_SIZE=0xF980000 CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)" @@ -50,4 +53,5 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_CONS_INDEX=3 +CONFIG_JFFS2_NAND=y CONFIG_OF_LIBFDT=y diff --git a/configs/dfi-bt700-q7x-151_defconfig b/configs/dfi-bt700-q7x-151_defconfig index 268fbfe..3af6c04 100644 --- a/configs/dfi-bt700-q7x-151_defconfig +++ b/configs/dfi-bt700-q7x-151_defconfig @@ -21,6 +21,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sda1 ro quiet" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;run boot" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 1f63bc8..d62bd96 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -37,7 +37,6 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400 -CONFIG_SPL_WATCHDOG=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y CONFIG_CMD_DFU=y diff --git a/configs/display5_defconfig b/configs/display5_defconfig index e68fae7..26af4a6 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -33,6 +33,8 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if run check_em_pad; then run recovery;else if test ${BOOT_FROM} = FACTORY; then run factory_nfs;else run boot_mmc;fi;fi" CONFIG_MISC_INIT_R=y CONFIG_SPL_BOOTCOUNT_LIMIT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set @@ -43,7 +45,6 @@ CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 -CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="display5 > " CONFIG_CMD_BOOTZ=y diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index e0b36f4..218a33d 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -43,7 +43,6 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y -CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="display5 factory > " CONFIG_CMD_BOOTZ=y diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index c6598f7..144fd30 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/d-link/dns325/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=1 CONFIG_TARGET_DNS325=y @@ -13,6 +14,8 @@ CONFIG_IDENT_STRING="\nD-Link DNS-325" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test -n ${bootenv} && usb start; then if run loadbootenv; then echo Loaded environment ${bootenv} from usb;run importbootenv;fi;if test -n ${bootenvcmd}; then echo Running bootenvcmd ...;run bootenvcmd;fi;fi;run setnandbootenv subbootcmd;" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -38,6 +41,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index d82dfd0..6c89a9a 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Seagate/dockstar/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_DOCKSTAR=y @@ -13,6 +14,8 @@ CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:root; ubifsload 0x800000 ${kernel}; ubifsload 0x1100000 ${initrd}; bootm 0x800000 0x1100000" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="DockStar> " diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 1826b11..d1aa91d 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; " CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index a74d0fb..db8716e 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -27,7 +27,7 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; " CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig index fc941b4..169b570 100644 --- a/configs/dra7xx_hs_evm_usb_defconfig +++ b/configs/dra7xx_hs_evm_usb_defconfig @@ -29,7 +29,7 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; " CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index c112389..557013d 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Marvell/dreamplug/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_DREAMPLUG=y @@ -14,6 +15,8 @@ CONFIG_IDENT_STRING="\nMarvell-DreamPlug" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv ethact ethernet-controller@72000; ${x_bootcmd_ethernet}; setenv ethact ethernet-controller@76000; ${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -32,7 +35,6 @@ CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_ENV_ADDR=0x100000 CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index d7e8651..8e2aea9 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -8,6 +8,7 @@ CONFIG_CMDLINE_TAG=y CONFIG_INITRD_TAG=y CONFIG_STATIC_MACH_TYPE=y CONFIG_MACH_TYPE=527 +CONFIG_SYS_KWD_CONFIG="board/Synology/ds109/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_DS109=y @@ -17,6 +18,8 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ds109" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv ethact egiga0; ${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_FLASH is not set @@ -32,7 +35,6 @@ CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_ENV_ADDR=0x3D0000 CONFIG_NETCONSOLE=y diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig index 4b867bc..d332467 100644 --- a/configs/ds414_defconfig +++ b/configs/ds414_defconfig @@ -27,6 +27,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe; sf read ${loadaddr} 0xd0000 0x2d0000; sf read ${ramdisk_addr_r} 0x3a0000 0x430000; bootm ${loadaddr} ${ramdisk_addr_r}" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y @@ -49,14 +51,11 @@ CONFIG_CMD_MTDPARTS=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/durian_defconfig b/configs/durian_defconfig index 158fec2..b44fd90 100644 --- a/configs/durian_defconfig +++ b/configs/durian_defconfig @@ -7,6 +7,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="phytium-durian" # CONFIG_PSCI_RESET is not set +CONFIG_SYS_PCI_64BIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x90000000 diff --git a/configs/eb_cpu5282_defconfig b/configs/eb_cpu5282_defconfig index 5b372e1..f695429 100644 --- a/configs/eb_cpu5282_defconfig +++ b/configs/eb_cpu5282_defconfig @@ -7,6 +7,8 @@ CONFIG_TARGET_EB_CPU5282=y CONFIG_SYS_LOAD_ADDR=0x20000 CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xFF000400" CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="printenv" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y # CONFIG_AUTO_COMPLETE is not set diff --git a/configs/eb_cpu5282_internal_defconfig b/configs/eb_cpu5282_internal_defconfig index ad0f6f8..0c00ead 100644 --- a/configs/eb_cpu5282_internal_defconfig +++ b/configs/eb_cpu5282_internal_defconfig @@ -7,6 +7,8 @@ CONFIG_TARGET_EB_CPU5282=y CONFIG_SYS_LOAD_ADDR=0x20000 CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xF0000418" CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="printenv" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y # CONFIG_AUTO_COMPLETE is not set diff --git a/configs/efi-x86_app32_defconfig b/configs/efi-x86_app32_defconfig index 480ef64..bb4c405 100644 --- a/configs/efi-x86_app32_defconfig +++ b/configs/efi-x86_app32_defconfig @@ -11,6 +11,8 @@ CONFIG_FIT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/efi-x86_app64_defconfig b/configs/efi-x86_app64_defconfig index bffbf69..3a2e789 100644 --- a/configs/efi-x86_app64_defconfig +++ b/configs/efi-x86_app64_defconfig @@ -11,6 +11,8 @@ CONFIG_FIT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig index 4f1d6a9..d7be957 100644 --- a/configs/efi-x86_payload32_defconfig +++ b/configs/efi-x86_payload32_defconfig @@ -10,6 +10,8 @@ CONFIG_FIT_SIGNATURE=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig index 26cfc49..36dd064 100644 --- a/configs/efi-x86_payload64_defconfig +++ b/configs/efi-x86_payload64_defconfig @@ -10,6 +10,8 @@ CONFIG_FIT_SIGNATURE=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/elgin-rv1108_defconfig b/configs/elgin-rv1108_defconfig index ee5bfdd..e600978 100644 --- a/configs/elgin-rv1108_defconfig +++ b/configs/elgin-rv1108_defconfig @@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rv1108-elgin-r1" CONFIG_ROCKCHIP_RV1108=y CONFIG_ROCKCHIP_BOOT_MODE_REG=0 CONFIG_TARGET_ELGIN_RV1108=y +# CONFIG_DEBUG_UART_BOARD_INIT is not set CONFIG_DEBUG_UART_BASE=0x10210000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig index 1cf38b8..1821b23 100644 --- a/configs/ethernut5_defconfig +++ b/configs/ethernut5_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0xc6000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set @@ -52,7 +54,6 @@ CONFIG_CMD_REISER=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y @@ -62,6 +63,7 @@ CONFIG_AT91_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SOFT=y CONFIG_SYS_I2C_SOFT_SLAVE=0 +CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_MTD_RAW_NAND=y @@ -79,3 +81,4 @@ CONFIG_ATMEL_USART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_USB=y +CONFIG_JFFS2_NAND=y diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig index 5f00d6a..ebdc06b 100644 --- a/configs/evb-ast2600_defconfig +++ b/configs/evb-ast2600_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_SYS_DCACHE_OFF=y +CONFIG_SPL_SYS_THUMB_BUILD=y CONFIG_ARCH_ASPEED=y -CONFIG_SYS_TEXT_BASE=0x10000 +CONFIG_SYS_TEXT_BASE=0x80000000 CONFIG_SYS_MALLOC_LEN=0x2000000 CONFIG_SYS_MALLOC_F_LEN=0x800 CONFIG_ASPEED_AST2600=y @@ -12,22 +13,28 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x10000 CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb" CONFIG_SPL_SERIAL=y +CONFIG_SPL_STACK_R_ADDR=0x83000000 CONFIG_SPL_SIZE_LIMIT=0x10000 CONFIG_SPL=y # CONFIG_ARMV7_NONSEC is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SYS_LOAD_ADDR=0x83000000 CONFIG_FIT=y -# CONFIG_LEGACY_IMAGE_FORMAT is not set +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000 +# CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw" CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="bootm 20100000" +CONFIG_BOOTCOMMAND="run bootspi" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y -# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000 +CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y @@ -47,6 +54,9 @@ CONFIG_REGMAP=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y +CONFIG_DM_HASH=y +CONFIG_HASH_ASPEED=y +CONFIG_ASPEED_ACRY=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_SPL_MISC=y @@ -65,5 +75,7 @@ CONFIG_SYS_NS16550=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_WDT=y +CONFIG_SHA384=y CONFIG_HEXDUMP=y # CONFIG_EFI_LOADER is not set +CONFIG_PHANDLE_CHECK_SEQ=y diff --git a/configs/evb-px30_defconfig b/configs/evb-px30_defconfig index 9488fc0..7d7e7f4 100644 --- a/configs/evb-px30_defconfig +++ b/configs/evb-px30_defconfig @@ -68,6 +68,7 @@ CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_ROCKCHIP_OTP=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_PHY_REALTEK=y diff --git a/configs/evb-rk3036_defconfig b/configs/evb-rk3036_defconfig index ce44c36..f94e5cb 100644 --- a/configs/evb-rk3036_defconfig +++ b/configs/evb-rk3036_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_ARCH_TIMER=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set # CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_ROCKCHIP=y diff --git a/configs/evb-rk3128_defconfig b/configs/evb-rk3128_defconfig index e446a22..c2f15f1 100644 --- a/configs/evb-rk3128_defconfig +++ b/configs/evb-rk3128_defconfig @@ -1,11 +1,13 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x60000000 CONFIG_NR_DRAM_BANKS=2 CONFIG_ENV_OFFSET=0x0 CONFIG_DEFAULT_DEVICE_TREE="rk3128-evb" CONFIG_ROCKCHIP_RK3128=y +# CONFIG_DEBUG_UART_BOARD_INIT is not set CONFIG_DEBUG_UART_BASE=0x20068000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig index a8b1c42..5dc6d95 100644 --- a/configs/evb-rk3229_defconfig +++ b/configs/evb-rk3229_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y CONFIG_TPL_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x61000000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig index eca9f5c..97d4c14 100644 --- a/configs/evb-rk3288_defconfig +++ b/configs/evb-rk3288_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig index 3194a2b..a3a319f 100644 --- a/configs/evb-rk3308_defconfig +++ b/configs/evb-rk3308_defconfig @@ -49,6 +49,7 @@ CONFIG_CLK=y # CONFIG_USB_FUNCTION_FASTBOOT is not set CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_DM_ETH=y diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig index 17664e1..b07bcf9 100644 --- a/configs/evb-rk3568_defconfig +++ b/configs/evb-rk3568_defconfig @@ -42,6 +42,7 @@ CONFIG_SPL_CLK=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y diff --git a/configs/evb-rv1108_defconfig b/configs/evb-rv1108_defconfig index 916a6fb..06ad04b 100644 --- a/configs/evb-rv1108_defconfig +++ b/configs/evb-rv1108_defconfig @@ -5,11 +5,12 @@ CONFIG_SYS_TEXT_BASE=0x60000000 CONFIG_NR_DRAM_BANKS=1 CONFIG_DEFAULT_DEVICE_TREE="rv1108-evb" CONFIG_ROCKCHIP_RV1108=y +# CONFIG_DEBUG_UART_BOARD_INIT is not set CONFIG_DEBUG_UART_BASE=0x10210000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x62000000 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="sf probe;sf read 0x62000000 0x140800 0x500000;dcache off;go 0x62000000" CONFIG_DEFAULT_FDT_FILE="rv1108-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/firefly-px30_defconfig b/configs/firefly-px30_defconfig index 7207028..0a84cce 100644 --- a/configs/firefly-px30_defconfig +++ b/configs/firefly-px30_defconfig @@ -69,6 +69,7 @@ CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_ROCKCHIP_OTP=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_PHY_REALTEK=y diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig index 057e909..2f72208 100644 --- a/configs/firefly-rk3288_defconfig +++ b/configs/firefly-rk3288_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_NR_DRAM_BANKS=1 diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 60e3c56..eaa9021 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -14,6 +14,8 @@ CONFIG_FIT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig index 396b2d9..97ed6709 100644 --- a/configs/gardena-smart-gateway-at91sam_defconfig +++ b/configs/gardena-smart-gateway-at91sam_defconfig @@ -11,7 +11,6 @@ CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_MEMTEST_START=0x0 CONFIG_ENV_SIZE=0x10000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g25-gardena-smart-gateway" diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig index 36d68f8..2bd302f 100644 --- a/configs/gardena-smart-gateway-mt7688_defconfig +++ b/configs/gardena-smart-gateway-mt7688_defconfig @@ -4,7 +4,6 @@ CONFIG_SYS_MALLOC_LEN=0x1000000 CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_MEMTEST_START=0x0 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0xA0000 CONFIG_ENV_SECT_SIZE=0x10000 diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig index 8232340..5d8d199 100644 --- a/configs/gazerbeam_defconfig +++ b/configs/gazerbeam_defconfig @@ -119,6 +119,8 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=5 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/mmcblk0p3 rw rootwait console=$consoledev,$baudrate $othbootargs;ext2load mmc 0:2 ${kernel_addr} $bootfile;ext2load mmc 0:2 ${fdt_addr} $fdtfile;bootm ${kernel_addr} - ${fdt_addr}" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_CPUINFO=y @@ -158,6 +160,15 @@ CONFIG_CLK=y CONFIG_ICS8N3QV01=y CONFIG_CPU=y CONFIG_CPU_MPC83XX=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFE001001 +CONFIG_SYS_OR0_PRELIM=0xFF800FF6 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE0601001 +CONFIG_SYS_OR1_PRELIM=0xFFF00850 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xE0701001 +CONFIG_SYS_OR2_PRELIM=0xFFF00850 CONFIG_DM_PCA953X=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/ge_b1x5v2_defconfig b/configs/ge_b1x5v2_defconfig index e4bd0f8..a1cf676 100644 --- a/configs/ge_b1x5v2_defconfig +++ b/configs/ge_b1x5v2_defconfig @@ -29,6 +29,8 @@ CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run tryboot;" CONFIG_DEFAULT_FDT_FILE="imx6dl-b1x5v2.dtb" CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_LOG_MAX_LEVEL=8 diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index 21cb0f3..8cfe772 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -15,6 +15,8 @@ CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run doquiet; run tryboot" CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig index d27278e..a106b89 100644 --- a/configs/giedi_defconfig +++ b/configs/giedi_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x2000 +CONFIG_IDENT_STRING=" ##v01.07" CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" CONFIG_SYS_LOAD_ADDR=0x80280000 @@ -28,11 +29,15 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" CONFIG_AUTOBOOT_KEYED_CTRLC=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index e8a2f36..ec8b739 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Seagate/goflexhome/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_GOFLEXHOME=y @@ -13,6 +14,8 @@ CONFIG_IDENT_STRING="\nSeagate GoFlex Home" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:root; ubifsload 0x800000 ${kernel}; bootm 0x800000" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/grpeach_defconfig b/configs/grpeach_defconfig index 7270751..678dbd3 100644 --- a/configs/grpeach_defconfig +++ b/configs/grpeach_defconfig @@ -10,6 +10,7 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="r7s72100-gr-peach-u-boot" CONFIG_RZA1=y +CONFIG_SYS_CLK_FREQ=66666666 CONFIG_SYS_LOAD_ADDR=0x20400000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -31,14 +32,7 @@ CONFIG_MAC_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_RZA1_GPIO=y diff --git a/configs/gurnard_defconfig b/configs/gurnard_defconfig index 7c7974c..05e9d18 100644 --- a/configs/gurnard_defconfig +++ b/configs/gurnard_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_TFTP_TSIZE=y CONFIG_AT91_GPIO=y +CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set @@ -50,5 +51,6 @@ CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_LOGO is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_CMD_DHRYSTONE=y diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index 4a9cd23..e7802af 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Marvell/guruplug/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_GURUPLUG=y @@ -13,6 +14,8 @@ CONFIG_IDENT_STRING="\nMarvell-GuruPlug" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 3c94c0a..dd85723 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -31,6 +31,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="for btype in ${bootdevs}; do echo; echo Attempting ${btype} boot...; if run ${btype}_boot; then; fi; done" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -138,6 +140,7 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_BACKLIGHT is not set # CONFIG_CMD_VIDCONSOLE is not set # CONFIG_VIDEO_BPP8 is not set diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 3309c65..b549820 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -31,6 +31,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="for btype in ${bootdevs}; do echo; echo Attempting ${btype} boot...; if run ${btype}_boot; then; fi; done" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -142,6 +144,7 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_BACKLIGHT is not set # CONFIG_CMD_VIDCONSOLE is not set # CONFIG_VIDEO_BPP8 is not set diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index b64d4ae..f75e73f 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -31,6 +31,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="for btype in ${bootdevs}; do echo; echo Attempting ${btype} boot...; if run ${btype}_boot; then; fi; done" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -146,6 +148,7 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_BACKLIGHT is not set # CONFIG_CMD_VIDCONSOLE is not set # CONFIG_VIDEO_BPP8 is not set diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index 6ce4f55..9763b21 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_NR_DRAM_BANKS=2 @@ -16,7 +17,6 @@ CONFIG_SYS_PROMPT="Tegra20 (Harmony) # " # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set @@ -37,6 +37,7 @@ CONFIG_SPL_DM=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_TEGRA_NAND=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_PCI=y diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index 85b42c7..3e8bfcf 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_TEXT_BASE=0x00008000 CONFIG_SYS_MALLOC_LEN=0x80000 CONFIG_NR_DRAM_BANKS=2 CONFIG_ENV_SIZE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="highbank" CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_DISTRO_DEFAULTS=y @@ -21,7 +22,6 @@ CONFIG_AUTOBOOT_KEYED_CTRLC=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_BOARD=y CONFIG_ENV_IS_IN_NVRAM=y CONFIG_ENV_ADDR=0xFFF88000 CONFIG_SCSI_AHCI=y diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig index 747fe29..5cc396c 100644 --- a/configs/hihope_rzg2_defconfig +++ b/configs/hihope_rzg2_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a774a1-hihope-rzg2m.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a774a1-hihope-rzg2m.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_HUSH_PARSER=y diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index eeab2e8..23a211c 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/raidsonic/ib62x0/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_IB62X0=y @@ -13,6 +14,8 @@ CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index d8593bc..605b98b 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/iomega/iconnect/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_ICONNECT=y @@ -13,6 +14,8 @@ CONFIG_IDENT_STRING=" Iomega iConnect" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part rootfs; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; bootm 0x800000" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="iconnect => " diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index cf4e8c0..246cc3d 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -8,7 +8,6 @@ CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y CONFIG_HIGH_BATS=y CONFIG_TARGET_IDS8313=y -CONFIG_SYS_IMMR=0xF0000000 CONFIG_CORE_PLL_RATIO_2_1=y CONFIG_PCI_HOST_MODE_ENABLE=y CONFIG_BOOT_ROM_INTERFACE_GPCM_8BIT=y @@ -128,6 +127,8 @@ CONFIG_BOOTDELAY=1 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter password - autoboot in %d seconds...\n" CONFIG_AUTOBOOT_DELAY_STR="ids" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run boot_cramfs" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo;echo Type \"run nfsboot\" to mount root filesystem over NFS;echo" # CONFIG_DISPLAY_BOARDINFO is not set @@ -156,6 +157,18 @@ CONFIG_ENV_ADDR_REDUND=0xFFFE0000 CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_I2C=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFF800801 +CONFIG_SYS_OR0_PRELIM=0xFF8008A7 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE1000C21 +CONFIG_SYS_OR1_PRELIM=0xFFFF87CE +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xE2000801 +CONFIG_SYS_OR2_PRELIM=0xFFFE0C74 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xE3000801 +CONFIG_SYS_OR3_PRELIM=0xFFFF8814 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3100 @@ -185,4 +198,6 @@ CONFIG_TSEC_ENET=y # CONFIG_PCI is not set CONFIG_RTC_PCF8563=y CONFIG_SYS_NS16550=y +CONFIG_WATCHDOG=y +CONFIG_JFFS2_NAND=y CONFIG_OF_LIBFDT=y diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index 63ab834..5192dd2 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -26,6 +26,8 @@ CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200n8" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run ${bootpri} ; run ${bootsec}" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run prebootcmd" CONFIG_BOARD_EARLY_INIT_F=y @@ -33,7 +35,7 @@ CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y CONFIG_SPL_DMA=y CONFIG_SPL_MMC_TINY=y @@ -70,14 +72,6 @@ CONFIG_SPL_OF_PLATDATA=y # CONFIG_SPL_OF_PLATDATA_PARENT is not set CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=3 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=40000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y @@ -89,7 +83,6 @@ CONFIG_MMC_MXS=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=3 -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_ISSI=y diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig index 3076dce..14bafc6 100644 --- a/configs/imx6dl_icore_nand_defconfig +++ b/configs/imx6dl_icore_nand_defconfig @@ -22,6 +22,8 @@ CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y @@ -64,6 +66,7 @@ CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig index 439917b..1e428d3 100644 --- a/configs/imx6q_icore_nand_defconfig +++ b/configs/imx6q_icore_nand_defconfig @@ -23,6 +23,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y @@ -65,6 +67,7 @@ CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 96736f9..3f59b99 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -23,7 +23,7 @@ CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run autoboot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y @@ -77,7 +77,6 @@ CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_DM_MTD=y diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index 42128c5..9c6e7e3 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -30,6 +30,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 61d8a7b..dbd4227 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -33,6 +33,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG=y @@ -82,6 +84,7 @@ CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig index 439917b..1e428d3 100644 --- a/configs/imx6qdl_icore_nand_defconfig +++ b/configs/imx6qdl_icore_nand_defconfig @@ -23,6 +23,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y @@ -65,6 +67,7 @@ CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index 697644b..4a4fcdf 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -27,6 +27,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig index 27cfa7f..cd11c95 100644 --- a/configs/imx6ul_geam_mmc_defconfig +++ b/configs/imx6ul_geam_mmc_defconfig @@ -25,6 +25,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig index 3863b8a..7ceb1ae 100644 --- a/configs/imx6ul_geam_nand_defconfig +++ b/configs/imx6ul_geam_nand_defconfig @@ -23,6 +23,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig index 256d732..e701d06 100644 --- a/configs/imx6ul_isiot_emmc_defconfig +++ b/configs/imx6ul_isiot_emmc_defconfig @@ -25,6 +25,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig index f1c97e5..d443812 100644 --- a/configs/imx6ul_isiot_nand_defconfig +++ b/configs/imx6ul_isiot_nand_defconfig @@ -23,6 +23,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx7_cm_defconfig b/configs/imx7_cm_defconfig index 3f8f618..a1aa680 100644 --- a/configs/imx7_cm_defconfig +++ b/configs/imx7_cm_defconfig @@ -21,7 +21,7 @@ CONFIG_ARMV7_BOOT_SEC_DEFAULT=y CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" +CONFIG_BOOTCOMMAND="run boot${boot-mode}" CONFIG_DEFAULT_FDT_FILE="ask" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_SPL_I2C=y diff --git a/configs/imx8mm-cl-iot-gate-optee_defconfig b/configs/imx8mm-cl-iot-gate-optee_defconfig index 29d0601..777d452 100644 --- a/configs/imx8mm-cl-iot-gate-optee_defconfig +++ b/configs/imx8mm-cl-iot-gate-optee_defconfig @@ -26,6 +26,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig index 7284891..b72f219 100644 --- a/configs/imx8mm-cl-iot-gate_defconfig +++ b/configs/imx8mm-cl-iot-gate_defconfig @@ -29,6 +29,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig index b0b562a..9c8dd24 100644 --- a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig +++ b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig @@ -26,6 +26,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-ctouch2.dtb" CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_POWER=y CONFIG_SYS_PROMPT="u-boot=> " # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig index 88e3b04..98ac1c3 100644 --- a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig +++ b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig @@ -26,6 +26,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-edimm2.2.dtb" CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_POWER=y CONFIG_SYS_PROMPT="u-boot=> " # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig index de00543..8ce78d5 100644 --- a/configs/imx8mm_beacon_defconfig +++ b/configs/imx8mm_beacon_defconfig @@ -23,9 +23,13 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi;" CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb" CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y @@ -79,7 +83,6 @@ CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig index d03bba7..01395fc 100644 --- a/configs/imx8mm_evk_defconfig +++ b/configs/imx8mm_evk_defconfig @@ -26,6 +26,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig index c4c75d2..3bcafb3 100644 --- a/configs/imx8mm_venice_defconfig +++ b/configs/imx8mm_venice_defconfig @@ -33,6 +33,8 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="gsc wd-disable" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index 5f116b7..934ca56 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -28,11 +28,15 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index 52c7a7e..49b6d1e 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -27,11 +27,15 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig index 8a0b85a..28cc551 100644 --- a/configs/imx8mn_ddr4_evk_defconfig +++ b/configs/imx8mn_ddr4_evk_defconfig @@ -29,6 +29,8 @@ CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig index 3ee15d3..865d657 100644 --- a/configs/imx8mn_evk_defconfig +++ b/configs/imx8mn_evk_defconfig @@ -31,6 +31,8 @@ CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index a448734..0ff549f 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -34,6 +34,8 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig index 907b1d2..f8a9d70 100644 --- a/configs/imx8mq_cm_defconfig +++ b/configs/imx8mq_cm_defconfig @@ -28,6 +28,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SYS_PROMPT="u-boot=> " CONFIG_CMD_FUSE=y diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 92aae70..c63cf23 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -25,9 +25,12 @@ CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y @@ -51,6 +54,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=1 CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 +CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig index 72ff17f..7714951 100644 --- a/configs/imx8mq_phanbell_defconfig +++ b/configs/imx8mq_phanbell_defconfig @@ -25,9 +25,14 @@ CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_OF_SYSTEM_SETUP=y CONFIG_SD_BOOT=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y @@ -55,6 +60,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=1 CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 +CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig index bf330ab..c58c5ff 100644 --- a/configs/imx8qm_mek_defconfig +++ b/configs/imx8qm_mek_defconfig @@ -20,13 +20,18 @@ CONFIG_SPL=y CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg" CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if test ${sec_boot} = yes; then if run loadcntr; then run mmcboot; else run netboot; fi; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig index fb43fa1..0cc30d3 100644 --- a/configs/imx8qm_rom7720_a1_4G_defconfig +++ b/configs/imx8qm_rom7720_a1_4G_defconfig @@ -20,6 +20,8 @@ CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig index 3f6fca6..8a336cb 100644 --- a/configs/imx8qxp_mek_defconfig +++ b/configs/imx8qxp_mek_defconfig @@ -20,13 +20,18 @@ CONFIG_SPL=y CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg" CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if test ${sec_boot} = yes; then if run loadcntr; then run mmcboot; else run netboot; fi; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y diff --git a/configs/imx8ulp_evk_defconfig b/configs/imx8ulp_evk_defconfig index 129931f..b444713 100644 --- a/configs/imx8ulp_evk_defconfig +++ b/configs/imx8ulp_evk_defconfig @@ -30,6 +30,8 @@ CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_WATCHDOG=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig index ca3f810..bc438b9 100644 --- a/configs/imxrt1050-evk_defconfig +++ b/configs/imxrt1050-evk_defconfig @@ -72,6 +72,7 @@ CONFIG_USB=y # CONFIG_SPL_DM_USB is not set CONFIG_USB_EHCI_HCD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_BACKLIGHT_GPIO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MXS=y diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index cd62a9d..8779e58 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/LaCie/netspace_v2/kwbimage-is2.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NETSPACE_V2=y @@ -13,10 +14,11 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-is2" CONFIG_IDENT_STRING=" IS v2" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp && run netconsole; if run usbload || run diskload; then bootm; fi" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -40,12 +42,12 @@ CONFIG_EFI_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x0 diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig index b22ebc9..420aae6 100644 --- a/configs/integratorap_cm720t_defconfig +++ b/configs/integratorap_cm720t_defconfig @@ -9,6 +9,7 @@ CONFIG_ENV_SIZE=0x8000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" +CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig index e03db98..3ff47e1 100644 --- a/configs/integratorap_cm920t_defconfig +++ b/configs/integratorap_cm920t_defconfig @@ -9,6 +9,7 @@ CONFIG_ENV_SIZE=0x8000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" +CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig index c79b66b..2160887 100644 --- a/configs/integratorap_cm926ejs_defconfig +++ b/configs/integratorap_cm926ejs_defconfig @@ -9,6 +9,7 @@ CONFIG_ENV_SIZE=0x8000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" +CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig index fd55189..b384dc6 100644 --- a/configs/integratorap_cm946es_defconfig +++ b/configs/integratorap_cm946es_defconfig @@ -9,6 +9,7 @@ CONFIG_ENV_SIZE=0x8000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" +CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y diff --git a/configs/integratorcp_cm1136_defconfig b/configs/integratorcp_cm1136_defconfig index 841e8e4..ba6450b 100644 --- a/configs/integratorcp_cm1136_defconfig +++ b/configs/integratorcp_cm1136_defconfig @@ -10,6 +10,8 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftpboot ; bootm" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y diff --git a/configs/integratorcp_cm920t_defconfig b/configs/integratorcp_cm920t_defconfig index fcaccdf..06bfdff 100644 --- a/configs/integratorcp_cm920t_defconfig +++ b/configs/integratorcp_cm920t_defconfig @@ -10,6 +10,8 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftpboot ; bootm" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y diff --git a/configs/integratorcp_cm926ejs_defconfig b/configs/integratorcp_cm926ejs_defconfig index 12004f1..3d15887 100644 --- a/configs/integratorcp_cm926ejs_defconfig +++ b/configs/integratorcp_cm926ejs_defconfig @@ -10,6 +10,8 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftpboot ; bootm" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y diff --git a/configs/integratorcp_cm946es_defconfig b/configs/integratorcp_cm946es_defconfig index c852d23..8d49ef4 100644 --- a/configs/integratorcp_cm946es_defconfig +++ b/configs/integratorcp_cm946es_defconfig @@ -10,6 +10,8 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftpboot ; bootm" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig index 4a87a33..10abb77 100644 --- a/configs/iot2050_defconfig +++ b/configs/iot2050_defconfig @@ -60,7 +60,6 @@ CONFIG_CMD_TIME=y # CONFIG_ISO_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y -CONFIG_OF_LIST="k3-am6528-iot2050-basic k3-am6548-iot2050-advanced" CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_SPL_OF_LIST="k3-am65-iot2050-spl" CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index bb37175..425b123 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index 014d526..2c49187 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run init_${boot}; run get_mon_${boot} run_mon; run get_kern_${boot}; run init_fw_rd_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_I2C=y diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig index fc1969c..7d739de 100644 --- a/configs/k2e_hs_evm_defconfig +++ b/configs/k2e_hs_evm_defconfig @@ -16,7 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="keystone-k2e-evm" CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run run_mon_hs; run init_${boot}; run get_fit_${boot}; bootm ${addr_fit}#${name_fdt}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig index 831ff69..f0a7d83 100644 --- a/configs/k2g_evm_defconfig +++ b/configs/k2g_evm_defconfig @@ -21,7 +21,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_mon_${boot} run_mon; run set_name_pmmc get_pmmc_${boot} run_pmmc; run get_kern_${boot}; run init_fw_rd_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_I2C=y diff --git a/configs/k2g_hs_evm_defconfig b/configs/k2g_hs_evm_defconfig index 2c20ee3..a5ebb42 100644 --- a/configs/k2g_hs_evm_defconfig +++ b/configs/k2g_hs_evm_defconfig @@ -15,7 +15,7 @@ CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm" CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run findfdt; run envboot; run run_mon_hs; run init_${boot}; run get_fit_${boot}; bootm ${addr_fit}#${name_fdt}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index 94e3a76..a2d9201 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run init_${boot}; run get_mon_${boot} run_mon; run get_kern_${boot}; run init_fw_rd_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_I2C=y diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig index 04c576a..c3ef1a7 100644 --- a/configs/k2hk_hs_evm_defconfig +++ b/configs/k2hk_hs_evm_defconfig @@ -16,7 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm" CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run run_mon_hs; run init_${boot}; run get_fit_${boot}; bootm ${addr_fit}#${name_fdt}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index f2a19a5..6ef1de7 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run init_${boot}; run get_mon_${boot} run_mon; run get_kern_${boot}; run init_fw_rd_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_I2C=y diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig index d4d8024..718ceff 100644 --- a/configs/k2l_hs_evm_defconfig +++ b/configs/k2l_hs_evm_defconfig @@ -15,6 +15,8 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm" CONFIG_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run run_mon_hs; run init_${boot}; run get_fit_${boot}; bootm ${addr_fit}#${name_fdt}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig index d6624dd..f4b1abf 100644 --- a/configs/km_kirkwood_128m16_defconfig +++ b/configs/km_kirkwood_128m16_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_128M16_1.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_ENV_SIZE=0x2000 @@ -48,6 +49,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SOFT=y CONFIG_SYS_I2C_SOFT_SLAVE=0x0 diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig index bf696cd..eba4f09 100644 --- a/configs/km_kirkwood_defconfig +++ b/configs/km_kirkwood_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_ENV_SIZE=0x2000 @@ -48,6 +49,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SOFT=y CONFIG_SYS_I2C_SOFT_SLAVE=0x0 diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig index 0731bb5..5d19c51 100644 --- a/configs/km_kirkwood_pci_defconfig +++ b/configs/km_kirkwood_pci_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_KM_FPGA_CONFIG=y @@ -49,6 +50,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SOFT=y CONFIG_SYS_I2C_SOFT_SLAVE=0x0 diff --git a/configs/kmcent2_defconfig b/configs/kmcent2_defconfig index 9361e81..baffe81 100644 --- a/configs/kmcent2_defconfig +++ b/configs/kmcent2_defconfig @@ -7,6 +7,7 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="kmcent2" CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020 +CONFIG_SYS_CLK_FREQ=66666666 CONFIG_MPC85xx=y CONFIG_TARGET_KMCENT2=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index 9a56f44..53f7abc 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -156,6 +156,7 @@ CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_DBYP_PLL_BYPASSED=y CONFIG_LCRR_EADC_2=y CONFIG_LCRR_CLKDIV_4=y +CONFIG_83XX_PCICLK=0x3ef1480 CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -193,6 +194,18 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_BOOTCOUNT_MEM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xF0001001 +CONFIG_SYS_OR0_PRELIM=0xF0000E55 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8000801 +CONFIG_SYS_OR1_PRELIM=0xFC000E25 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xA0000801 +CONFIG_SYS_OR3_PRELIM=0xF0000E25 +CONFIG_SYS_BR4_PRELIM_BOOL=y +CONFIG_SYS_BR4_PRELIM=0xB0000801 +CONFIG_SYS_OR4_PRELIM=0xF0000E25 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index 12aa230..9124504 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_256M8_1.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 @@ -52,6 +53,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SOFT=y CONFIG_SYS_I2C_SOFT_SLAVE=0x0 diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index e1bce4a..228bbe6 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -163,6 +163,15 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_BOOTCOUNT_MEM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xF0001001 +CONFIG_SYS_OR0_PRELIM=0xF0000E55 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8000801 +CONFIG_SYS_OR1_PRELIM=0xFC000E25 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xA0000801 +CONFIG_SYS_OR3_PRELIM=0xF0000E25 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig index 06b2d1f..d81c787 100644 --- a/configs/kmnusa_defconfig +++ b/configs/kmnusa_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_128M16_1.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_KM_FPGA_CONFIG=y @@ -52,6 +53,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SOFT=y CONFIG_SYS_I2C_SOFT_SLAVE=0x0 diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index 75ab1ae..d230638 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -139,6 +139,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +CONFIG_83XX_PCICLK=0x3ef1480 CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -174,6 +175,18 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_BOOTCOUNT_MEM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xF0001001 +CONFIG_SYS_OR0_PRELIM=0xF0000E55 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8000801 +CONFIG_SYS_OR1_PRELIM=0xF8000E25 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xA0000801 +CONFIG_SYS_OR2_PRELIM=0xF0000C25 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xB0001001 +CONFIG_SYS_OR3_PRELIM=0xF0000040 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index be5034f..b0b5926 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -119,6 +119,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +CONFIG_83XX_PCICLK=0x3ef1480 CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -153,6 +154,15 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_BOOTCOUNT_MEM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xF0001001 +CONFIG_SYS_OR0_PRELIM=0xF0000E55 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8000801 +CONFIG_SYS_OR1_PRELIM=0xF8000E25 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xA0000801 +CONFIG_SYS_OR2_PRELIM=0xF0000C25 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 diff --git a/configs/kmsuse2_defconfig b/configs/kmsuse2_defconfig index a528bf5..d274c95 100644 --- a/configs/kmsuse2_defconfig +++ b/configs/kmsuse2_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_128M16_1.cfg" CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_KM_FPGA_CONFIG=y @@ -53,6 +54,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SOFT=y CONFIG_SYS_I2C_SOFT_SLAVE=0x0 diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index b683d37..53aaf6c 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -118,6 +118,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +CONFIG_83XX_PCICLK=0x3ef1480 CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -155,6 +156,15 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_BOOTCOUNT_MEM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xF0001001 +CONFIG_SYS_OR0_PRELIM=0xF0000E55 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8000801 +CONFIG_SYS_OR1_PRELIM=0xF8000E25 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xB0001001 +CONFIG_SYS_OR3_PRELIM=0xF0000050 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig index 4c5509b..b333769 100644 --- a/configs/kmtepr2_defconfig +++ b/configs/kmtepr2_defconfig @@ -139,6 +139,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +CONFIG_83XX_PCICLK=0x3ef1480 CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -173,6 +174,18 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_BOOTCOUNT_MEM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xF0001001 +CONFIG_SYS_OR0_PRELIM=0xF0000E55 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8000801 +CONFIG_SYS_OR1_PRELIM=0xF8000E25 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xA0000801 +CONFIG_SYS_OR2_PRELIM=0xF0000C25 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xB0001001 +CONFIG_SYS_OR3_PRELIM=0xF0000040 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 diff --git a/configs/kontron-sl-mx6ul_defconfig b/configs/kontron-sl-mx6ul_defconfig index 47faca8..6d67475 100644 --- a/configs/kontron-sl-mx6ul_defconfig +++ b/configs/kontron-sl-mx6ul_defconfig @@ -29,7 +29,6 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8A CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_WATCHDOG=y @@ -55,7 +54,6 @@ CONFIG_OF_LIST="imx6ul-kontron-n631x-s imx6ull-kontron-n641x-s" CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=2 CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index d856703..35d12fc 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -57,10 +57,6 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIST="imx8mm-kontron-n801x-s imx8mm-kontron-n801x-s-lvds" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=80000000 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y diff --git a/configs/kp_imx53_defconfig b/configs/kp_imx53_defconfig index 1246615..d2e09ac 100644 --- a/configs/kp_imx53_defconfig +++ b/configs/kp_imx53_defconfig @@ -15,6 +15,8 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR="." +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run usbupd; run distro_bootcmd" CONFIG_SILENT_CONSOLE=y # CONFIG_SILENT_CONSOLE_UPDATE_ON_SET is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/kylin-rk3036_defconfig b/configs/kylin-rk3036_defconfig index 00c1564..6c7df1e 100644 --- a/configs/kylin-rk3036_defconfig +++ b/configs/kylin-rk3036_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_ARCH_TIMER=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set # CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_ROCKCHIP=y diff --git a/configs/legoev3_defconfig b/configs/legoev3_defconfig index 632f35d..87890cd 100644 --- a/configs/legoev3_defconfig +++ b/configs/legoev3_defconfig @@ -8,10 +8,13 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="da850-lego-ev3" CONFIG_SYS_LOAD_ADDR=0xc0700000 +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=0 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds - press 'l' to stop...\n" CONFIG_AUTOBOOT_STOP_STR="l" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if mmc rescan; then if run loadbootscr; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd...;run uenvcmd;fi;if run loadimage; then run mmcargs; if run loadfdt; then echo Using ${fdtfile}...;run fdtfixup; run fdtboot; fi; run mmcboot; fi; fi; fi; run flashargs; run flashboot" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig index 7dcd854..945521b 100644 --- a/configs/libretech-ac_defconfig +++ b/configs/libretech-ac_defconfig @@ -39,7 +39,6 @@ CONFIG_MMC_MESON_GX=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHY_MESON_GXL=y diff --git a/configs/libretech-cc_v2_defconfig b/configs/libretech-cc_v2_defconfig index 99a0b28..0dae223 100644 --- a/configs/libretech-cc_v2_defconfig +++ b/configs/libretech-cc_v2_defconfig @@ -35,7 +35,6 @@ CONFIG_MMC_MESON_GX=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_PHY_MESON_GXL=y CONFIG_DM_ETH=y diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig index 6e8c8a4..ca96191 100644 --- a/configs/libretech-s905d-pc_defconfig +++ b/configs/libretech-s905d-pc_defconfig @@ -36,7 +36,6 @@ CONFIG_SARADC_MESON=y CONFIG_MMC_MESON_GX=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH=y diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig index b08ca44..02626cb 100644 --- a/configs/libretech-s912-pc_defconfig +++ b/configs/libretech-s912-pc_defconfig @@ -35,7 +35,6 @@ CONFIG_SARADC_MESON=y CONFIG_MMC_MESON_GX=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH=y diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig index ab62c20..041495f 100644 --- a/configs/liteboard_defconfig +++ b/configs/liteboard_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_DEFAULT_FDT_FILE="imx6ul-liteboard.dtb" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig index cc4a738..312713e 100644 --- a/configs/ls1012a2g5rdb_qspi_defconfig +++ b/configs/ls1012a2g5rdb_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y @@ -39,7 +40,9 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012a2g5rdb_tfa_defconfig b/configs/ls1012a2g5rdb_tfa_defconfig index 74112bb..6129881 100644 --- a/configs/ls1012a2g5rdb_tfa_defconfig +++ b/configs/ls1012a2g5rdb_tfa_defconfig @@ -40,7 +40,9 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index b40c632..ad3b7bf 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -21,6 +21,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" +CONFIG_BOOTCOMMAND="run distro_bootcmd;run qspi_bootcmd" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y @@ -37,6 +38,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y # CONFIG_MMC is not set diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig index 34e3568..3317a05 100644 --- a/configs/ls1012afrdm_tfa_defconfig +++ b/configs/ls1012afrdm_tfa_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y # CONFIG_MMC is not set diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig index e878a2c..cb8b288 100644 --- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig @@ -20,6 +20,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y @@ -37,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig index 8ed1336..610f32c 100644 --- a/configs/ls1012afrwy_qspi_defconfig +++ b/configs/ls1012afrwy_qspi_defconfig @@ -21,6 +21,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y @@ -42,6 +43,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig index 83ee702..b3cb6f7 100644 --- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012afrwy_tfa_defconfig b/configs/ls1012afrwy_tfa_defconfig index 44d5017..afec07c 100644 --- a/configs/ls1012afrwy_tfa_defconfig +++ b/configs/ls1012afrwy_tfa_defconfig @@ -42,6 +42,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index 692c83f..93e76d9 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -22,7 +22,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y @@ -45,17 +45,15 @@ CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=1000000 -CONFIG_USE_ENV_SPI_MODE=y CONFIG_ENV_SPI_MODE=0x03 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 @@ -65,7 +63,10 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_SF_DEFAULT_SPEED=10000000 # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_FSL_PFE=y CONFIG_DM_ETH=y diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig index dd472ba..476ebd0 100644 --- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig @@ -45,6 +45,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 @@ -54,7 +55,10 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_SF_DEFAULT_SPEED=10000000 # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_FSL_PFE=y CONFIG_DM_ETH=y diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig index 10f6ddf..d4d9b8f 100644 --- a/configs/ls1012aqds_tfa_defconfig +++ b/configs/ls1012aqds_tfa_defconfig @@ -46,17 +46,15 @@ CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=1000000 -CONFIG_USE_ENV_SPI_MODE=y CONFIG_ENV_SPI_MODE=0x03 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 @@ -66,7 +64,10 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_SF_DEFAULT_SPEED=10000000 # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_FSL_PFE=y CONFIG_DM_ETH=y diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig index 4270f3a..8767c87 100644 --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig @@ -21,7 +21,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y @@ -41,6 +41,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig index 0f61fa3..fccbef7 100644 --- a/configs/ls1012ardb_qspi_defconfig +++ b/configs/ls1012ardb_qspi_defconfig @@ -22,6 +22,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y @@ -43,6 +44,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig index 7527271..bf35286 100644 --- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig @@ -41,6 +41,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig index 652e459..7a175d3 100644 --- a/configs/ls1012ardb_tfa_defconfig +++ b/configs/ls1012ardb_tfa_defconfig @@ -43,6 +43,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_FSL_ESDHC=y diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig index 2a999e8..4705e34 100644 --- a/configs/ls1021aiot_qspi_defconfig +++ b/configs/ls1021aiot_qspi_defconfig @@ -13,6 +13,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart" CONFIG_AHCI=y CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_QSPI_BOOT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y @@ -44,6 +46,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x51 CONFIG_FSL_ESDHC=y CONFIG_MTD=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHY_ATHEROS=y CONFIG_PHY_GIGE=y diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig index f25c9c7..e387264 100644 --- a/configs/ls1021aiot_sdcard_defconfig +++ b/configs/ls1021aiot_sdcard_defconfig @@ -18,10 +18,13 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_SYS_LOAD_ADDR=0x82000000 -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT,SD_BOOT_QSPI" +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021aiot/ls102xa_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg" +CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y @@ -60,6 +63,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x51 CONFIG_FSL_ESDHC=y CONFIG_MTD=y CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHY_ATHEROS=y CONFIG_PHY_GIGE=y @@ -70,6 +74,7 @@ CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_U_QE=y CONFIG_SYS_QE_FW_ADDR=0xf40000 CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig index 8571ca3..79ccc41 100644 --- a/configs/ls1021aqds_ddr4_nor_defconfig +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -20,6 +20,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -54,6 +55,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index ff27477..0a2a076 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -21,6 +21,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -55,6 +56,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index d6b36e6..0b12f10 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -28,6 +28,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="NAND_BOOT" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021aqds/ls102xa_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg" @@ -76,6 +77,7 @@ CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig index 725e2f4..63930e4 100644 --- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig @@ -21,6 +21,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -53,6 +54,7 @@ CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig index 3a2fe03..f4e2274 100644 --- a/configs/ls1021aqds_nor_defconfig +++ b/configs/ls1021aqds_nor_defconfig @@ -20,6 +20,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -55,6 +56,7 @@ CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index 6a0523b..0eacaa3 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -21,6 +21,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -56,6 +57,7 @@ CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index a787ce0..f967619 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -54,6 +54,7 @@ CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index e9efcd7..fa190a7 100644 --- a/configs/ls1021aqds_sdcard_ifc_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -26,7 +26,7 @@ CONFIG_AHCI=y CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021aqds/ls102xa_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg" @@ -74,6 +74,7 @@ CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig index 082ef4c..625dd08 100644 --- a/configs/ls1021aqds_sdcard_qspi_defconfig +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -26,11 +26,11 @@ CONFIG_AHCI=y CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT,SD_BOOT_QSPI" CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021aqds/ls102xa_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg" CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -71,6 +71,7 @@ CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021atsn_qspi_defconfig b/configs/ls1021atsn_qspi_defconfig index d92fdf4..5c8cee3 100644 --- a/configs/ls1021atsn_qspi_defconfig +++ b/configs/ls1021atsn_qspi_defconfig @@ -35,6 +35,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DM_I2C=y @@ -53,8 +54,10 @@ CONFIG_PHY_BROADCOM=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_DM_MDIO=y +CONFIG_DM_DSA=y CONFIG_PHY_GIGE=y CONFIG_MII=y +CONFIG_SJA1105=y CONFIG_TSEC_ENET=y CONFIG_NVME=y CONFIG_PCI=y diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig index a745857..a3b8f24 100644 --- a/configs/ls1021atsn_sdcard_defconfig +++ b/configs/ls1021atsn_sdcard_defconfig @@ -22,11 +22,12 @@ CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI" +CONFIG_SYS_EXTRA_OPTIONS="SPL_FSL_PBL" CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atsn/ls102xa_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg" CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y CONFIG_MISC_INIT_R=y @@ -50,6 +51,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_DM_I2C=y @@ -68,8 +70,10 @@ CONFIG_PHY_BROADCOM=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_DM_MDIO=y +CONFIG_DM_DSA=y CONFIG_PHY_GIGE=y CONFIG_MII=y +CONFIG_SJA1105=y CONFIG_TSEC_ENET=y CONFIG_NVME=y CONFIG_PCI=y diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig index 3bd0e1d..f61d29c 100644 --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig @@ -24,6 +24,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd;env exists secureboot && esbc_halt;" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y @@ -43,6 +44,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_DM=y CONFIG_SATA_CEVA=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index 548ec89..02c25cd 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -23,6 +23,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd;env exists secureboot && esbc_halt;" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y @@ -45,6 +46,7 @@ CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index f7ccb4b..49d6dda 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -24,7 +24,7 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd;env exists secureboot && esbc_halt;" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y @@ -47,6 +47,7 @@ CONFIG_ENV_ADDR=0x60300000 CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 16af461..36a8aee 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -25,7 +25,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y @@ -47,6 +47,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index 404b33f..756e072 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -27,13 +27,14 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT" CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atwr/ls102xa_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg" +CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y @@ -62,6 +63,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y # CONFIG_SPL_DM_I2C is not set CONFIG_SPL_SYS_I2C_LEGACY=y @@ -83,6 +85,7 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_PCI=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_U_QE=y CONFIG_SYS_QE_FW_ADDR=0x940000 CONFIG_SYS_NS16550=y CONFIG_USB=y diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig index 1377ce6..ede4c95 100644 --- a/configs/ls1021atwr_sdcard_ifc_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -27,7 +27,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT" CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atwr/ls102xa_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg" @@ -35,6 +34,7 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y @@ -64,6 +64,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig index 84bab31..1315043 100644 --- a/configs/ls1021atwr_sdcard_qspi_defconfig +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -27,14 +27,15 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT,SD_BOOT_QSPI" CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atwr/ls102xa_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg" CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt" CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y @@ -63,6 +64,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index 2c4a60e..2fb9073 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -37,6 +37,7 @@ CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_WDT=y CONFIG_CMD_CACHE=y +CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y @@ -45,6 +46,7 @@ CONFIG_DM=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y # CONFIG_DDR_SPD is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index 0aa91b1..0bdca83 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -39,6 +39,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_WDT=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y +CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y @@ -51,6 +52,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y # CONFIG_DDR_SPD is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig index 0a76166..dbf6af9 100644 --- a/configs/ls1028aqds_tfa_lpuart_defconfig +++ b/configs/ls1028aqds_tfa_lpuart_defconfig @@ -39,6 +39,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_WDT=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y +CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y @@ -51,6 +52,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y # CONFIG_DDR_SPD is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index c385978..5cb55d0 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -36,6 +36,7 @@ CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_WDT=y CONFIG_CMD_CACHE=y +CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_NET_RANDOM_ETHADDR=y @@ -44,6 +45,7 @@ CONFIG_DM=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y # CONFIG_DDR_SPD is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 035974a..b58254d 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -38,6 +38,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_WDT=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y +CONFIG_MP=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y @@ -50,6 +51,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y # CONFIG_DDR_SPD is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig index d6d64de..1a484ff 100644 --- a/configs/ls1043aqds_defconfig +++ b/configs/ls1043aqds_defconfig @@ -14,11 +14,16 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" @@ -49,6 +54,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -63,6 +69,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index ba3a382..dfd7fb8 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -14,12 +14,17 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-lpuart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" @@ -50,6 +55,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -64,6 +70,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index e2dd6e6..9e87f0f 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -17,6 +17,10 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_SPL_TEXT_BASE=0x10000000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y @@ -26,6 +30,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="NAND_BOOT" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043aqds/ls1043aqds_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg" @@ -69,6 +74,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -84,6 +90,9 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig index 8dd5faf..bffe105 100644 --- a/configs/ls1043aqds_nor_ddr3_defconfig +++ b/configs/ls1043aqds_nor_ddr3_defconfig @@ -14,11 +14,16 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" @@ -50,6 +55,7 @@ CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -64,6 +70,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index 6b13c49..e01324c 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -15,11 +15,16 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y @@ -50,6 +55,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EARLY_INIT=y @@ -57,7 +63,10 @@ CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 CONFIG_FSL_ESDHC=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index 31aa2be..b487b37 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -17,6 +17,10 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_SPL_TEXT_BASE=0x10000000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -26,7 +30,7 @@ CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043aqds/ls1043aqds_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg" @@ -69,6 +73,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -83,6 +88,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index 8c6a3df..084d104 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -17,6 +17,10 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_SPL_TEXT_BASE=0x10000000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -26,11 +30,12 @@ CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT,SD_BOOT_QSPI" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043aqds/ls1043aqds_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg" CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" @@ -67,6 +72,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EARLY_INIT=y @@ -74,7 +80,10 @@ CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 CONFIG_FSL_ESDHC=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig index a680590..3e303c5 100644 --- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig @@ -15,12 +15,17 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" @@ -48,6 +53,7 @@ CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EARLY_INIT=y @@ -64,7 +70,10 @@ CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig index cce59cd..8d02bed 100644 --- a/configs/ls1043aqds_tfa_defconfig +++ b/configs/ls1043aqds_tfa_defconfig @@ -16,12 +16,17 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" @@ -48,7 +53,6 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_NAND=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 CONFIG_ENV_ADDR=0x60500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y @@ -58,6 +62,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EARLY_INIT=y @@ -74,7 +79,10 @@ CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig index 8d6d401..2d85f67 100644 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -18,6 +18,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -36,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_DM=y # CONFIG_DDR_SPD is not set CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -50,6 +52,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHY_REALTEK=y CONFIG_PHY_VITESSE=y diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig index 331d5e1..ca6958f 100644 --- a/configs/ls1043ardb_defconfig +++ b/configs/ls1043ardb_defconfig @@ -18,6 +18,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -39,6 +40,7 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y # CONFIG_DDR_SPD is not set CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -53,6 +55,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index 94b4f13e..bbc775a 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -52,6 +52,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SPL_DM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 @@ -66,6 +67,9 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index a188dd0..e8986db 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -59,6 +59,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -74,6 +75,9 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index 762f349..31380eb 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -18,7 +18,6 @@ CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT" CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043ardb/ls1043ardb_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg" @@ -26,6 +25,7 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_SPL_FSL_PBL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -53,6 +53,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 @@ -67,6 +68,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHY_REALTEK=y CONFIG_PHY_VITESSE=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index ba0b2cd..c399ed0 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -22,7 +22,6 @@ CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT" CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043ardb/ls1043ardb_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg" @@ -30,6 +29,7 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y @@ -58,6 +58,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -72,6 +73,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig index 966a3ff..8ac9a06 100644 --- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_DM=y # CONFIG_DDR_SPD is not set CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -52,6 +53,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHY_REALTEK=y CONFIG_PHY_VITESSE=y diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig index 7e741c7..99c1257 100644 --- a/configs/ls1043ardb_tfa_defconfig +++ b/configs/ls1043ardb_tfa_defconfig @@ -44,6 +44,7 @@ CONFIG_DM=y CONFIG_FSL_CAAM=y # CONFIG_DDR_SPD is not set CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -58,6 +59,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_REALTEK=y diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig index 0b14f27..cd1915b 100644 --- a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig @@ -35,6 +35,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y # CONFIG_DDR_SPD is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x52 diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig index 85db989..af07b1c 100644 --- a/configs/ls1046afrwy_tfa_defconfig +++ b/configs/ls1046afrwy_tfa_defconfig @@ -41,6 +41,7 @@ CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y # CONFIG_DDR_SPD is not set +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x52 diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig index eb32965..5542632 100644 --- a/configs/ls1046aqds_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -14,15 +14,20 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y @@ -47,6 +52,7 @@ CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig index a8d9441..f136aea 100644 --- a/configs/ls1046aqds_defconfig +++ b/configs/ls1046aqds_defconfig @@ -14,15 +14,20 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y @@ -50,6 +55,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index e41c916..6d44890 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -14,16 +14,21 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y @@ -51,6 +56,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 25a178f..e4cd4a2 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -17,6 +17,10 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_SPL_TEXT_BASE=0x10000000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y @@ -25,6 +29,7 @@ CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046aqds/ls1046aqds_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg" @@ -32,7 +37,7 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nand_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y @@ -69,6 +74,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index dad335a..fe295c5 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -15,16 +15,21 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:2m(uboot),14m(free)" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y @@ -51,6 +56,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_EARLY_INIT=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index d9d4bf2..fe1fe6f 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -17,6 +17,10 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_SPL_TEXT_BASE=0x10000000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -26,6 +30,7 @@ CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046aqds/ls1046aqds_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg" @@ -33,7 +38,7 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y @@ -70,6 +75,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 10b3b66..18f560e 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -17,6 +17,10 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_SPL_TEXT_BASE=0x10000000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -26,15 +30,16 @@ CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI" +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046aqds/ls1046aqds_pbi.cfg" CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg" CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:2m(uboot),14m(free)" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y @@ -69,6 +74,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_EARLY_INIT=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig index a73ced2..b84f877 100644 --- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig @@ -15,12 +15,17 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" @@ -49,6 +54,7 @@ CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_EARLY_INIT=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig index 4bf413c..f706dd6 100644 --- a/configs/ls1046aqds_tfa_defconfig +++ b/configs/ls1046aqds_tfa_defconfig @@ -16,12 +16,17 @@ CONFIG_SYS_I2C_MXC_I2C4=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" +CONFIG_VOL_MONITOR_INA220=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" @@ -49,7 +54,6 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_NAND=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 CONFIG_ENV_ADDR=0x60500000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y @@ -59,6 +63,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_EARLY_INIT=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig index 0fb5998..46301fb 100644 --- a/configs/ls1046ardb_emmc_defconfig +++ b/configs/ls1046ardb_emmc_defconfig @@ -63,6 +63,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig index a50f381..a4696f1 100644 --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -24,6 +24,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y @@ -44,6 +45,7 @@ CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig index eeb0b8a..1837833 100644 --- a/configs/ls1046ardb_qspi_defconfig +++ b/configs/ls1046ardb_qspi_defconfig @@ -25,6 +25,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y @@ -48,6 +49,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig index 4556713..777b767 100644 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ b/configs/ls1046ardb_qspi_spl_defconfig @@ -34,6 +34,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y @@ -67,6 +68,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig index 47c6321..2abbbaf 100644 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -29,6 +29,7 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_SPL_FSL_PBL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -58,6 +59,7 @@ CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y # CONFIG_SPL_DM_I2C is not set CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig index 0ea465c..ac8f2bc 100644 --- a/configs/ls1046ardb_sdcard_defconfig +++ b/configs/ls1046ardb_sdcard_defconfig @@ -30,6 +30,7 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y @@ -61,6 +62,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig index 995daae..bd1dc05 100644 --- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig @@ -41,6 +41,7 @@ CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig index 3501764..149091a 100644 --- a/configs/ls1046ardb_tfa_defconfig +++ b/configs/ls1046ardb_tfa_defconfig @@ -47,6 +47,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig index 51e5622..a2b2a34 100644 --- a/configs/ls1088aqds_defconfig +++ b/configs/ls1088aqds_defconfig @@ -11,14 +11,22 @@ CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fsl_mc lazyapply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y @@ -48,6 +56,7 @@ CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EARLY_INIT=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig index f108c38..dbcd6e2 100644 --- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig @@ -11,6 +11,11 @@ CONFIG_NXP_ESBC=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y @@ -22,7 +27,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_QSPI_BOOT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y @@ -46,6 +51,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 CONFIG_FSL_ESDHC=y @@ -55,7 +61,10 @@ CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index 37d42f3..7033c92 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -12,6 +12,11 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y @@ -23,7 +28,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_QSPI_BOOT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_GREPENV=y @@ -49,6 +54,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 CONFIG_FSL_ESDHC=y @@ -58,7 +64,10 @@ CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig index 5a85ac4..e537231 100644 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -14,6 +14,11 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" CONFIG_SPL_TEXT_BASE=0x1800a000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -22,9 +27,12 @@ CONFIG_SPL=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_SD_BOOT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -59,6 +67,7 @@ CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EARLY_INIT=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig index bd43c85..9df9845 100644 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ b/configs/ls1088aqds_sdcard_qspi_defconfig @@ -14,6 +14,11 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" CONFIG_SPL_TEXT_BASE=0x1800a000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -24,11 +29,11 @@ CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI" CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -59,6 +64,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 CONFIG_FSL_ESDHC=y @@ -68,7 +74,10 @@ CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig index eeb4313..aac8486 100644 --- a/configs/ls1088aqds_tfa_defconfig +++ b/configs/ls1088aqds_tfa_defconfig @@ -14,6 +14,11 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_QSPI_AHB_INIT=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -22,9 +27,9 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y @@ -59,6 +64,7 @@ CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y @@ -75,7 +81,10 @@ CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig index 668ec3d..ed0943b 100644 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig @@ -11,6 +11,11 @@ CONFIG_NXP_ESBC=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y @@ -48,6 +53,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_MXC_I2C1_SPEED=40000000 CONFIG_SYS_MXC_I2C2_SPEED=40000000 diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index 7953d9b..486a20d 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -12,6 +12,11 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y @@ -51,6 +56,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_MXC_I2C1_SPEED=40000000 CONFIG_SYS_MXC_I2C2_SPEED=40000000 diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index 8dea978..f0beb9f 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -14,6 +14,11 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" CONFIG_SPL_TEXT_BASE=0x1800a000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -23,8 +28,8 @@ CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI" CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set @@ -60,6 +65,7 @@ CONFIG_SCSI_AHCI=y # CONFIG_SPL_BLK is not set CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_MXC_I2C1_SPEED=40000000 CONFIG_SYS_MXC_I2C2_SPEED=40000000 diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index 580f6a2..d54ff50 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -14,6 +14,11 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" CONFIG_SPL_TEXT_BASE=0x1800a000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -24,8 +29,8 @@ CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI" CONFIG_SD_BOOT=y +CONFIG_SD_BOOT_QSPI=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set @@ -61,6 +66,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_MXC_I2C1_SPEED=40000000 CONFIG_SYS_MXC_I2C2_SPEED=40000000 diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig index 1f9a15b..dd547f7 100644 --- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig @@ -13,6 +13,11 @@ CONFIG_NXP_ESBC=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_QSPI_AHB_INIT=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -48,6 +53,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig index c354225..fc2d1b4 100644 --- a/configs/ls1088ardb_tfa_defconfig +++ b/configs/ls1088ardb_tfa_defconfig @@ -14,6 +14,11 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_QSPI_AHB_INIT=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -54,6 +59,7 @@ CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig index d56a6ac..0ad25ac 100644 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ b/configs/ls2080aqds_SECURE_BOOT_defconfig @@ -14,10 +14,11 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y @@ -54,6 +55,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y @@ -66,6 +70,7 @@ CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index a8cad44..30cdad6 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -14,10 +14,11 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y @@ -57,6 +58,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y @@ -69,6 +73,7 @@ CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index b902d31..47f09b6 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -19,11 +19,12 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y @@ -67,6 +68,7 @@ CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y @@ -79,6 +81,7 @@ CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig index 7d87fa6..bbc9f3d 100644 --- a/configs/ls2080aqds_qspi_defconfig +++ b/configs/ls2080aqds_qspi_defconfig @@ -14,11 +14,12 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 @@ -56,6 +57,7 @@ CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y @@ -68,6 +70,7 @@ CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig index 84a8f5d..c7a6e2a 100644 --- a/configs/ls2080aqds_sdcard_defconfig +++ b/configs/ls2080aqds_sdcard_defconfig @@ -20,11 +20,12 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="mmc read 0x80200000 0x6800 0x800; fsl_mc apply dpl 0x80200000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y @@ -62,6 +63,7 @@ CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y @@ -74,6 +76,7 @@ CONFIG_NVME=y CONFIG_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig index b333932..15dec62 100644 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ b/configs/ls2080ardb_SECURE_BOOT_defconfig @@ -8,16 +8,21 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_NXP_ESBC=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y @@ -54,6 +59,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index 9216ffb..909c10b 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -8,16 +8,21 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y @@ -57,6 +62,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index 1e94c86..f40ecb7 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -11,6 +11,10 @@ CONFIG_ENV_OFFSET=0x200000 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" CONFIG_SPL_TEXT_BASE=0x1800a000 CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y @@ -19,11 +23,12 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig index fb12277..ed0b1b7 100644 --- a/configs/ls2081ardb_defconfig +++ b/configs/ls2081ardb_defconfig @@ -9,6 +9,10 @@ CONFIG_ENV_OFFSET=0x300000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2081a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y @@ -16,11 +20,12 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -50,6 +55,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x57 CONFIG_FSL_ESDHC=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig index 6821ed1..61e0fdf 100644 --- a/configs/ls2088aqds_tfa_defconfig +++ b/configs/ls2088aqds_tfa_defconfig @@ -18,10 +18,10 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y @@ -55,6 +55,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y @@ -70,6 +71,9 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_FSL_IFC=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y CONFIG_PHY_REALTEK=y @@ -87,6 +91,7 @@ CONFIG_NVME=y CONFIG_PCI=y CONFIG_PCIE_LAYERSCAPE_RC=y CONFIG_DM_RTC=y +CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig index 3c436ab..c49d163 100644 --- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig @@ -9,6 +9,10 @@ CONFIG_NXP_ESBC=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y @@ -16,9 +20,10 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -40,6 +45,7 @@ CONFIG_SATA_CEVA=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EARLY_INIT=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 @@ -48,6 +54,7 @@ CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig index b99273b..b8c7c78 100644 --- a/configs/ls2088ardb_qspi_defconfig +++ b/configs/ls2088ardb_qspi_defconfig @@ -10,6 +10,10 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y @@ -17,11 +21,12 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -47,6 +52,7 @@ CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_EARLY_INIT=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 @@ -55,6 +61,7 @@ CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig index f9b464b..3cc9168 100644 --- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig @@ -11,6 +11,10 @@ CONFIG_NXP_ESBC=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_QSPI_AHB_INIT=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -18,10 +22,10 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y @@ -46,6 +50,7 @@ CONFIG_SATA_CEVA=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y @@ -63,6 +68,7 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig index 8e76f59..a28b45b 100644 --- a/configs/ls2088ardb_tfa_defconfig +++ b/configs/ls2088ardb_tfa_defconfig @@ -12,6 +12,10 @@ CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" +CONFIG_VOL_MONITOR_IR36021_READ=y +CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_QSPI_AHB_INIT=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -19,10 +23,10 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y @@ -53,6 +57,7 @@ CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y @@ -70,6 +75,7 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 471b17e..497da09 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/buffalo/lsxl/kwbimage-lschl.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_LSXL=y @@ -38,6 +39,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index 4188c32..cadeb9a 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/buffalo/lsxl/kwbimage-lsxhl.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_LSXL=y @@ -38,6 +39,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig index 261154b..a9a0a27 100644 --- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig @@ -12,6 +12,11 @@ CONFIG_NXP_ESBC=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="lx2160aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSPI_AHB_EN_4BYTE=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -20,9 +25,9 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y @@ -48,6 +53,7 @@ CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig index ddcf681..de8dc55 100644 --- a/configs/lx2160aqds_tfa_defconfig +++ b/configs/lx2160aqds_tfa_defconfig @@ -13,6 +13,11 @@ CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="lx2160aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSPI_AHB_EN_4BYTE=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -21,10 +26,10 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y @@ -55,6 +60,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig index a8af790..ac42c25 100644 --- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig @@ -12,6 +12,11 @@ CONFIG_NXP_ESBC=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="lx2160ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_EMC2305=y CONFIG_FSPI_AHB_EN_4BYTE=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y @@ -21,9 +26,9 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y @@ -46,6 +51,7 @@ CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig index d81a4b1..59955ee 100644 --- a/configs/lx2160ardb_tfa_defconfig +++ b/configs/lx2160ardb_tfa_defconfig @@ -13,6 +13,11 @@ CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="lx2160ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_EMC2305=y CONFIG_FSPI_AHB_EN_4BYTE=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y @@ -22,10 +27,10 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y @@ -54,6 +59,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig index 1d6ed44..149e82b 100644 --- a/configs/lx2160ardb_tfa_stmm_defconfig +++ b/configs/lx2160ardb_tfa_stmm_defconfig @@ -13,6 +13,11 @@ CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="lx2160ardb_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_EMC2305=y CONFIG_FSPI_AHB_EN_4BYTE=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y @@ -22,10 +27,10 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y CONFIG_CMD_GREPENV=y CONFIG_CMD_NVEDIT_EFI=y @@ -54,6 +59,7 @@ CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y +CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x57 diff --git a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig index 38e2307..d017a53 100644 --- a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig @@ -12,6 +12,11 @@ CONFIG_NXP_ESBC=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="lx2162aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSPI_AHB_EN_4BYTE=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -20,9 +25,9 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y diff --git a/configs/lx2162aqds_tfa_defconfig b/configs/lx2162aqds_tfa_defconfig index 2028bfc..203554b 100644 --- a/configs/lx2162aqds_tfa_defconfig +++ b/configs/lx2162aqds_tfa_defconfig @@ -13,6 +13,11 @@ CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="lx2162aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSPI_AHB_EN_4BYTE=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -21,10 +26,10 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y diff --git a/configs/lx2162aqds_tfa_verified_boot_defconfig b/configs/lx2162aqds_tfa_verified_boot_defconfig index 0b08589..32487eb 100644 --- a/configs/lx2162aqds_tfa_verified_boot_defconfig +++ b/configs/lx2162aqds_tfa_verified_boot_defconfig @@ -13,6 +13,11 @@ CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2162a-qds" CONFIG_FSL_USE_PCA9547_MUX=y +CONFIG_VID=y +CONFIG_SPL_VID=y +CONFIG_VID_FLS_ENV="lx2162aqds_vdd_mv" +CONFIG_VOL_MONITOR_LTC3882_READ=y +CONFIG_VOL_MONITOR_LTC3882_SET=y CONFIG_FSPI_AHB_EN_4BYTE=y CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y @@ -22,10 +27,10 @@ CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig index 48d7566..26a48c1 100644 --- a/configs/m53menlo_defconfig +++ b/configs/m53menlo_defconfig @@ -29,12 +29,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttymxc0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run mmc_mmc" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run try_bootscript" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y @@ -109,6 +110,7 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_SMSC95XX=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig index 2815634..0ce228d 100644 --- a/configs/marsboard_defconfig +++ b/configs/marsboard_defconfig @@ -57,6 +57,7 @@ CONFIG_USB=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_BACKLIGHT is not set # CONFIG_CMD_VIDCONSOLE is not set # CONFIG_VIDEO_BPP8 is not set diff --git a/configs/maxbcm_defconfig b/configs/maxbcm_defconfig index ce870c9..a69c035 100644 --- a/configs/maxbcm_defconfig +++ b/configs/maxbcm_defconfig @@ -33,14 +33,11 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 # CONFIG_MMC is not set CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index 2a6f8d0..d1eedc6 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_NR_DRAM_BANKS=2 @@ -17,7 +18,6 @@ CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set @@ -32,6 +32,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_DM=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_TEGRA_NAND=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y diff --git a/configs/meesc_dataflash_defconfig b/configs/meesc_dataflash_defconfig index 6fda013..5d9f783 100644 --- a/configs/meesc_dataflash_defconfig +++ b/configs/meesc_dataflash_defconfig @@ -28,7 +28,6 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index 8a8c55b..83accc3 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -26,6 +26,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig index ddffbc6..f85292d 100644 --- a/configs/miqi-rk3288_defconfig +++ b/configs/miqi-rk3288_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_NR_DRAM_BANKS=1 diff --git a/configs/mt8183_pumpkin_defconfig b/configs/mt8183_pumpkin_defconfig index 08fc603..8e43acd 100644 --- a/configs/mt8183_pumpkin_defconfig +++ b/configs/mt8183_pumpkin_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_LOAD_ADDR=0x4c000000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="mt8183-pumpkin" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/mt8516_pumpkin_defconfig b/configs/mt8516_pumpkin_defconfig index b073579..53ea050 100644 --- a/configs/mt8516_pumpkin_defconfig +++ b/configs/mt8516_pumpkin_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x4c000000 CONFIG_FIT=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="mt8516-pumpkin" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_LATE_INIT=y diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig index 8a77aa4..fc1606a 100644 --- a/configs/mx23_olinuxino_defconfig +++ b/configs/mx23_olinuxino_defconfig @@ -16,6 +16,8 @@ CONFIG_SPL=y # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x42000000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig index ba468ad..f51398c 100644 --- a/configs/mx23evk_defconfig +++ b/configs/mx23evk_defconfig @@ -15,6 +15,8 @@ CONFIG_TARGET_MX23EVK=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x42000000 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else echo ERR: Fail to boot from MMC; fi; fi; else exit; fi" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig index d57db5f..22310f5 100644 --- a/configs/mx28evk_auart_console_defconfig +++ b/configs/mx28evk_auart_console_defconfig @@ -14,6 +14,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x42000000 CONFIG_SYS_EXTRA_OPTIONS="MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig index 4e6426b..b7502aa 100644 --- a/configs/mx28evk_defconfig +++ b/configs/mx28evk_defconfig @@ -16,6 +16,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x42000000 CONFIG_FIT=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig index 2f708de..090e5fa 100644 --- a/configs/mx28evk_nand_defconfig +++ b/configs/mx28evk_nand_defconfig @@ -14,6 +14,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x380000 CONFIG_SYS_LOAD_ADDR=0x42000000 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig index 424ebcf..6cb21b9 100644 --- a/configs/mx28evk_spi_defconfig +++ b/configs/mx28evk_spi_defconfig @@ -12,6 +12,8 @@ CONFIG_TARGET_MX28EVK=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x42000000 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig index 06c43b7..7ee220a 100644 --- a/configs/mx51evk_defconfig +++ b/configs/mx51evk_defconfig @@ -10,6 +10,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx51-babbage" # CONFIG_CMD_BMODE is not set CONFIG_SYS_LOAD_ADDR=0x92000000 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig index 492b2e8..2fb44bc 100644 --- a/configs/mx53loco_defconfig +++ b/configs/mx53loco_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx53-qsb" # CONFIG_CMD_BMODE is not set CONFIG_SYS_LOAD_ADDR=0x72000000 CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 854d564..71db59f 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -14,6 +14,8 @@ CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run doquiet; run tryboot" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index 7037451..4fbd83f 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -70,6 +70,7 @@ CONFIG_IMX_THERMAL=y CONFIG_USB=y CONFIG_USB_KEYBOARD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_BACKLIGHT is not set # CONFIG_CMD_VIDCONSOLE is not set # CONFIG_VIDEO_BPP8 is not set diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index 8625189..2b77a46 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -21,7 +21,6 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index c5cdc3a..e03ac32 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -27,6 +27,8 @@ CONFIG_SPL_FIT_PRINT=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y @@ -109,6 +111,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 6733038..6cb7413 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -26,6 +26,8 @@ CONFIG_SPL_FIT_PRINT=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y @@ -116,6 +118,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index d12c1a0..12789c9 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -11,6 +11,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk" # CONFIG_CMD_BMODE is not set CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 7877a4e..2bfeac3 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -13,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk" # CONFIG_CMD_BMODE is not set CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SPI_BOOT=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig index acf5921..09d71ae 100644 --- a/configs/mx6slevk_spl_defconfig +++ b/configs/mx6slevk_spl_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y # CONFIG_CMD_BMODE is not set CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y diff --git a/configs/mx6sllevk_defconfig b/configs/mx6sllevk_defconfig index b7abb8f..48162fc 100644 --- a/configs/mx6sllevk_defconfig +++ b/configs/mx6sllevk_defconfig @@ -13,6 +13,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx6sll-evk" # CONFIG_CMD_BMODE is not set CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/mx6sllevk_plugin_defconfig b/configs/mx6sllevk_plugin_defconfig index 92ba9ca..7096943 100644 --- a/configs/mx6sllevk_plugin_defconfig +++ b/configs/mx6sllevk_plugin_defconfig @@ -14,6 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6sll-evk" CONFIG_USE_IMXIMG_PLUGIN=y # CONFIG_CMD_BMODE is not set CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig index c85a793..6d3895f 100644 --- a/configs/mx6sxsabreauto_defconfig +++ b/configs/mx6sxsabreauto_defconfig @@ -11,6 +11,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx6sx-sabreauto" # CONFIG_CMD_BMODE is not set CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index 4b22c8e..03670c7 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -12,6 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6sx-sdb" # CONFIG_CMD_BMODE is not set CONFIG_NXP_BOARD_REVISION=y CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run findfdt; mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig index 5fa9d34..1b84a65 100644 --- a/configs/mx6ul_14x14_evk_defconfig +++ b/configs/mx6ul_14x14_evk_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -92,6 +94,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y diff --git a/configs/mx6ul_9x9_evk_defconfig b/configs/mx6ul_9x9_evk_defconfig index 1b80f04..9b418d6 100644 --- a/configs/mx6ul_9x9_evk_defconfig +++ b/configs/mx6ul_9x9_evk_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -82,6 +84,7 @@ CONFIG_IMX_THERMAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y diff --git a/configs/mx6ull_14x14_evk_defconfig b/configs/mx6ull_14x14_evk_defconfig index d5ae040..a053d2f 100644 --- a/configs/mx6ull_14x14_evk_defconfig +++ b/configs/mx6ull_14x14_evk_defconfig @@ -12,6 +12,8 @@ CONFIG_TARGET_MX6ULL_14X14_EVK=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk" CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y @@ -58,4 +60,5 @@ CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_QSPI=y +CONFIG_SOFT_SPI=y CONFIG_IMX_THERMAL=y diff --git a/configs/mx6ull_14x14_evk_plugin_defconfig b/configs/mx6ull_14x14_evk_plugin_defconfig index e5b68b0..07e5e23 100644 --- a/configs/mx6ull_14x14_evk_plugin_defconfig +++ b/configs/mx6ull_14x14_evk_plugin_defconfig @@ -13,6 +13,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk" CONFIG_USE_IMXIMG_PLUGIN=y CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y @@ -57,4 +59,5 @@ CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_QSPI=y +CONFIG_SOFT_SPI=y CONFIG_IMX_THERMAL=y diff --git a/configs/mx6ulz_14x14_evk_defconfig b/configs/mx6ulz_14x14_evk_defconfig index e871b20..2f9c7a2 100644 --- a/configs/mx6ulz_14x14_evk_defconfig +++ b/configs/mx6ulz_14x14_evk_defconfig @@ -12,6 +12,8 @@ CONFIG_TARGET_MX6ULL_14X14_EVK=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx6ulz-14x14-evk" CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y @@ -48,4 +50,5 @@ CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_QSPI=y +CONFIG_SOFT_SPI=y CONFIG_IMX_THERMAL=y diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index eb6da95..4f64147 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -12,6 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" CONFIG_TARGET_MX7ULP_EVK=y CONFIG_SYS_LOAD_ADDR=0x60800000 CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig index 141592f..0f8e9e8 100644 --- a/configs/mx7ulp_evk_plugin_defconfig +++ b/configs/mx7ulp_evk_plugin_defconfig @@ -11,6 +11,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" CONFIG_TARGET_MX7ULP_EVK=y CONFIG_SYS_LOAD_ADDR=0x60800000 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MEMTEST=y diff --git a/configs/myir_mys_6ulx_defconfig b/configs/myir_mys_6ulx_defconfig index 1c6ebc1..6c39b5e 100644 --- a/configs/myir_mys_6ulx_defconfig +++ b/configs/myir_mys_6ulx_defconfig @@ -18,7 +18,6 @@ CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 386ebca..7e4e19a 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Seagate/nas220/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NAS220=y @@ -13,6 +14,7 @@ CONFIG_IDENT_STRING="\nNAS 220" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -40,6 +42,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y @@ -51,3 +54,5 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_NAND=y diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index 5d84a5d..985f530 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -3,9 +3,11 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/LaCie/net2big_v2/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NET2BIG_V2=y +CONFIG_NET2BIG_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 @@ -13,10 +15,11 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-net2big" CONFIG_IDENT_STRING=" 2Big v2" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp && run netconsole; if run usbload || run diskload; then bootm; fi" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -40,12 +43,12 @@ CONFIG_EFI_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x0 diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index 15cc556..668f4ea 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -3,9 +3,11 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/LaCie/netspace_v2/kwbimage-ns2l.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NETSPACE_V2=y +CONFIG_NETSPACE_LITE_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 @@ -13,10 +15,11 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2lite" CONFIG_IDENT_STRING=" NS v2 Lite" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_LITE_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp && run netconsole; if run usbload || run diskload; then bootm; fi" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -40,12 +43,12 @@ CONFIG_EFI_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x0 diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index 1946e44..25ce3c6 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -3,9 +3,11 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/LaCie/netspace_v2/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NETSPACE_V2=y +CONFIG_NETSPACE_MAX_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 @@ -13,10 +15,11 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2max" CONFIG_IDENT_STRING=" NS Max v2" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp && run netconsole; if run usbload || run diskload; then bootm; fi" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -40,12 +43,12 @@ CONFIG_EFI_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x0 diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index 2bcb849..0c9a303 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -3,9 +3,11 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/LaCie/netspace_v2/kwbimage-ns2l.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NETSPACE_V2=y +CONFIG_NETSPACE_MINI_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 @@ -13,10 +15,11 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2mini" CONFIG_IDENT_STRING=" NS v2 Mini" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MINI_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp && run netconsole; if run usbload || run diskload; then bootm; fi" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -38,13 +41,13 @@ CONFIG_EFI_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x0 diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index b281a40..8f662ed 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -3,9 +3,11 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/LaCie/netspace_v2/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NETSPACE_V2=y +CONFIG_NETSPACE_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 @@ -13,10 +15,11 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2" CONFIG_IDENT_STRING=" NS v2" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_V2" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp && run netconsole; if run usbload || run diskload; then bootm; fi" CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -40,12 +43,12 @@ CONFIG_EFI_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_KIRKWOOD_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x0 diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig index 593a43e..553c7b3 100644 --- a/configs/nitrogen6dl2g_defconfig +++ b/configs/nitrogen6dl2g_defconfig @@ -22,6 +22,8 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig index 4bcc675..f5208b3 100644 --- a/configs/nitrogen6dl_defconfig +++ b/configs/nitrogen6dl_defconfig @@ -22,6 +22,8 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig index 76fc53d..c8f94f6 100644 --- a/configs/nitrogen6q2g_defconfig +++ b/configs/nitrogen6q2g_defconfig @@ -22,6 +22,8 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig index fca3e5f..9793c73 100644 --- a/configs/nitrogen6q_defconfig +++ b/configs/nitrogen6q_defconfig @@ -22,6 +22,8 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig index 8b720b0..c678e40 100644 --- a/configs/nitrogen6s1g_defconfig +++ b/configs/nitrogen6s1g_defconfig @@ -22,6 +22,8 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig index a9d239e..8431e6f 100644 --- a/configs/nitrogen6s_defconfig +++ b/configs/nitrogen6s_defconfig @@ -22,6 +22,8 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_AHCI=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 87f8ab9..4a95f42 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y # CONFIG_SYS_THUMB_BUILD is not set +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_SUPPORT_PASSING_ATAGS=y CONFIG_CMDLINE_TAG=y @@ -20,6 +21,8 @@ CONFIG_SYS_LOAD_ADDR=0x80000000 CONFIG_BOOTDELAY=30 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_MENU_SHOW=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run sdboot;run emmcboot;run attachboot;echo" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run preboot" CONFIG_CONSOLE_MUX=y diff --git a/configs/novena_defconfig b/configs/novena_defconfig index 06864db..5022441 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -60,6 +60,7 @@ CONFIG_DWC_AHSATA=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MXC=y +CONFIG_KEYBOARD=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y @@ -84,6 +85,7 @@ CONFIG_USB_GADGET=y CONFIG_CI_UDC=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index c2c5994..46ca3ba 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/zyxel/nsa310s/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NSA310S=y @@ -12,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s" CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index 601786c..a5bd3e8 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x81000100 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/octeontx2_95xx_defconfig b/configs/octeontx2_95xx_defconfig index e1b86a5..d29c850 100644 --- a/configs/octeontx2_95xx_defconfig +++ b/configs/octeontx2_95xx_defconfig @@ -12,12 +12,14 @@ CONFIG_ENV_OFFSET=0xF00000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_TARGET_OCTEONTX2_95XX=y CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="octeontx" CONFIG_DEBUG_UART_BASE=0x87e028000000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x4000000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y +CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y @@ -63,28 +65,19 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y CONFIG_PARTITION_TYPE_GUID=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=125000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_VERSION_VARIABLE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_TFTP_TSIZE=y CONFIG_DM_I2C=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_HS400_SUPPORT=y CONFIG_MMC_OCTEONTX=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=125000000 CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/octeontx2_96xx_defconfig b/configs/octeontx2_96xx_defconfig index ec03d95..1298bfe 100644 --- a/configs/octeontx2_96xx_defconfig +++ b/configs/octeontx2_96xx_defconfig @@ -10,6 +10,7 @@ CONFIG_ENV_OFFSET=0xF00000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_TARGET_OCTEONTX2_96XX=y CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="octeontx" CONFIG_DEBUG_UART_BASE=0x87e028000000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y @@ -18,6 +19,7 @@ CONFIG_AHCI=y CONFIG_SYS_LOAD_ADDR=0x4000000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y +CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y @@ -64,17 +66,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y CONFIG_PARTITION_TYPE_GUID=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=125000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_VERSION_VARIABLE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_TFTP_TSIZE=y @@ -85,12 +78,12 @@ CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_HS400_SUPPORT=y CONFIG_MMC_OCTEONTX=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=125000000 CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/octeontx_81xx_defconfig b/configs/octeontx_81xx_defconfig index d0728ac..ba8cc97 100644 --- a/configs/octeontx_81xx_defconfig +++ b/configs/octeontx_81xx_defconfig @@ -12,6 +12,7 @@ CONFIG_ENV_OFFSET=0xF00000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_TARGET_OCTEONTX_81XX=y CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="octeontx" CONFIG_DEBUG_UART_BASE=0x87e028000000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y @@ -65,17 +66,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y CONFIG_PARTITION_TYPE_GUID=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=16000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_VERSION_VARIABLE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_TFTP_TSIZE=y @@ -83,11 +75,11 @@ CONFIG_SCSI_AHCI=y CONFIG_AHCI_PCI=y CONFIG_DM_I2C=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OCTEONTX=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=16000000 CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/octeontx_83xx_defconfig b/configs/octeontx_83xx_defconfig index 6c9609b..2675934 100644 --- a/configs/octeontx_83xx_defconfig +++ b/configs/octeontx_83xx_defconfig @@ -10,6 +10,7 @@ CONFIG_ENV_OFFSET=0xF00000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_TARGET_OCTEONTX_83XX=y CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="octeontx" CONFIG_DEBUG_UART_BASE=0x87e028000000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y @@ -62,17 +63,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y CONFIG_PARTITION_TYPE_GUID=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=16000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_VERSION_VARIABLE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_TFTP_TSIZE=y @@ -80,11 +72,11 @@ CONFIG_SCSI_AHCI=y CONFIG_AHCI_PCI=y CONFIG_DM_I2C=y CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OCTEONTX=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=16000000 CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index 25a1099..54ff579 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_EXYNOS=y CONFIG_SYS_TEXT_BASE=0x43e00000 CONFIG_SYS_MALLOC_LEN=0x5004000 @@ -17,7 +18,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="Please use defined boot" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd ; run autoboot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_TYPES=y diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig index 124a3b3..433e6d7 100644 --- a/configs/omap35_logic_defconfig +++ b/configs/omap35_logic_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_ANDROID_BOOT_IMAGE=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run autoboot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb" diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index d7e4f36..b33a27c 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_ANDROID_BOOT_IMAGE=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run autoboot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-35xx-devkit.dtb" diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 0142a7a..8616a65 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_ANDROID_BOOT_IMAGE=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run autoboot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_SYS_CONSOLE_INFO_QUIET=y diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index ee47516..79a5102 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_ANDROID_BOOT_IMAGE=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run autoboot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-37xx-devkit.dtb" diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index 0280b4a..7a4418c 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -11,7 +11,7 @@ CONFIG_ENV_OFFSET_REDUND=0x280000 CONFIG_ARMV7_LPAE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; " CONFIG_DEFAULT_FDT_FILE="omap5-uevm.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index a0f6f3e..ca1a581 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -22,7 +22,10 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0xc0700000 +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run envboot; run mmcboot; " CONFIG_LOGLEVEL=3 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/openpiton_riscv64_defconfig b/configs/openpiton_riscv64_defconfig index 38a3b3f..6dbb079 100644 --- a/configs/openpiton_riscv64_defconfig +++ b/configs/openpiton_riscv64_defconfig @@ -14,6 +14,8 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_LOAD_ADDR=0x87000000 # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fdt addr ${fdtcontroladdr}; fdt move ${fdtcontroladdr} ${fdt_addr_r}; load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; booti ${kernel_addr_r} - ${fdt_addr_r}; " CONFIG_SYS_PROMPT="openpiton$ " # CONFIG_CMD_CPU is not set CONFIG_CMD_BOOTZ=y diff --git a/configs/openpiton_riscv64_spl_defconfig b/configs/openpiton_riscv64_spl_defconfig index a1db071..629b204 100644 --- a/configs/openpiton_riscv64_spl_defconfig +++ b/configs/openpiton_riscv64_spl_defconfig @@ -18,6 +18,8 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_LOAD_ADDR=0x87000000 # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fdt addr ${fdtcontroladdr}; fdt move ${fdtcontroladdr} ${fdt_addr_r}; load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; booti ${kernel_addr_r} - ${fdt_addr_r}; " # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index 0e22f69..2c5a29c 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Marvell/openrd/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_OPENRD=y @@ -13,8 +14,9 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-base" CONFIG_IDENT_STRING="\nOpenRD-Base" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE" CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; ${x_bootcmd_usb}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index 069f96c..b21d41b 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -4,17 +4,20 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Marvell/openrd/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_OPENRD=y +CONFIG_BOARD_IS_OPENRD_CLIENT=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-client" CONFIG_IDENT_STRING="\nOpenRD-Client" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT" CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; ${x_bootcmd_usb}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index 7483c45..ceeb621 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -4,17 +4,20 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Marvell/openrd/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_OPENRD=y +CONFIG_BOARD_IS_OPENRD_ULTIMATE=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-ultimate" CONFIG_IDENT_STRING="\nOpenRD-Ultimate" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 -CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE" CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; ${x_bootcmd_usb}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig index c52d2a5..1f06499 100644 --- a/configs/opos6uldev_defconfig +++ b/configs/opos6uldev_defconfig @@ -23,6 +23,8 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttymxc0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run emmcboot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run check_env" CONFIG_DEFAULT_FDT_FILE="imx6ul-opos6uldev.dtb" @@ -103,6 +105,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/origen_defconfig b/configs/origen_defconfig index fe9fc33..83a83ab 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -16,7 +16,7 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" for ORIGEN" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x43e00000 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootenv; then echo Loaded environment from ${bootenv};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;if run loadbootscript; then run bootscript; fi; fi;load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_SPL_FRAMEWORK is not set diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig index 3883669..b335d85 100644 --- a/configs/p2371-0000_defconfig +++ b/configs/p2371-0000_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80080000 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index ea95943..67657b0 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80080000 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig index da33f88..d3f169a 100644 --- a/configs/p2571_defconfig +++ b/configs/p2571_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80080000 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig index 90e9396..53d98b1 100644 --- a/configs/p2771-0000-000_defconfig +++ b/configs/p2771-0000-000_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80080000 CONFIG_NR_DRAM_BANKS=1026 diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig index 6bdc113..2e3eec0 100644 --- a/configs/p2771-0000-500_defconfig +++ b/configs/p2771-0000-500_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80080000 CONFIG_NR_DRAM_BANKS=1026 diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig index 85402e9..e4265d6 100644 --- a/configs/p3450-0000_defconfig +++ b/configs/p3450-0000_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80080000 CONFIG_SYS_MALLOC_LEN=0x2500000 @@ -32,6 +33,7 @@ CONFIG_OF_LIVE=y CONFIG_ENV_OVERWRITE=y # CONFIG_ENV_IS_IN_MMC is not set CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_SPI_MAX_HZ=48000000 CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_DFU_SF=y diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index a209e41..f11b57d 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig index afdba34..83f7d93 100644 --- a/configs/pcm052_defconfig +++ b/configs/pcm052_defconfig @@ -15,6 +15,8 @@ CONFIG_ENV_OFFSET_REDUND=0xC0000 CONFIG_TARGET_PCM052=y CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run bootcmd_nand" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig index ce7be03..b30270a 100644 --- a/configs/pcm058_defconfig +++ b/configs/pcm058_defconfig @@ -27,7 +27,7 @@ CONFIG_CMD_HDMIDETECT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run mmcboot;run nandboot" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig index dcd9a6b..930191d 100644 --- a/configs/peach-pi_defconfig +++ b/configs/peach-pi_defconfig @@ -38,7 +38,6 @@ CONFIG_CMD_TPM_TEST=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_I2C_CROS_EC_TUNNEL=y diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index 4259f14..16fde6d 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -37,7 +37,6 @@ CONFIG_CMD_TPM_TEST=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_I2C_CROS_EC_TUNNEL=y diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig index 267864f..53d57e0 100644 --- a/configs/pg_wcom_expu1_defconfig +++ b/configs/pg_wcom_expu1_defconfig @@ -17,6 +17,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 +CONFIG_SYS_CLK_FREQ=66666666 CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x82000000 diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig index 5b1aa8f..3eaf7fd 100644 --- a/configs/pg_wcom_seli8_defconfig +++ b/configs/pg_wcom_seli8_defconfig @@ -17,6 +17,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 +CONFIG_SYS_CLK_FREQ=66666666 CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x82000000 diff --git a/configs/phycore-am335x-r2-regor_defconfig b/configs/phycore-am335x-r2-regor_defconfig index 3fd061a..e2a5731 100644 --- a/configs/phycore-am335x-r2-regor_defconfig +++ b/configs/phycore-am335x-r2-regor_defconfig @@ -17,6 +17,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_PAYLOAD="u-boot.img" # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="am335x-regor-rdk.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y diff --git a/configs/phycore-am335x-r2-wega_defconfig b/configs/phycore-am335x-r2-wega_defconfig index 70b7d9e..9459787 100644 --- a/configs/phycore-am335x-r2-wega_defconfig +++ b/configs/phycore-am335x-r2-wega_defconfig @@ -17,6 +17,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_PAYLOAD="u-boot.img" # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="am335x-wega-rdk.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index 89a4f28..c6b2719 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -23,10 +23,14 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;" CONFIG_DEFAULT_FDT_FILE="oftree" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_FLASH_MTD=y @@ -74,7 +78,6 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y @@ -85,7 +88,6 @@ CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=3 -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=80000000 CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 758c288..2391aa4 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -24,12 +24,16 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;" CONFIG_DEFAULT_FDT_FILE="oftree" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y @@ -75,7 +79,6 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig index a202747..63aabfb 100644 --- a/configs/phycore-rk3288_defconfig +++ b/configs/phycore-rk3288_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_NR_DRAM_BANKS=1 diff --git a/configs/phycore_pcl063_defconfig b/configs/phycore_pcl063_defconfig index b89cdd9..0a5e6c5 100644 --- a/configs/phycore_pcl063_defconfig +++ b/configs/phycore_pcl063_defconfig @@ -17,7 +17,6 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/phycore_pcl063_ull_defconfig b/configs/phycore_pcl063_ull_defconfig index 694beb6..a672b16 100644 --- a/configs/phycore_pcl063_ull_defconfig +++ b/configs/phycore_pcl063_ull_defconfig @@ -16,7 +16,7 @@ CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run mmc_mmc_fit" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig index 4e86f32..ff6be78 100644 --- a/configs/pic32mzdask_defconfig +++ b/configs/pic32mzdask_defconfig @@ -13,6 +13,7 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x88500000 CONFIG_BOOTDELAY=5 +CONFIG_BOOTCOMMAND="run distro_bootcmd || run legacy_bootcmd" CONFIG_SYS_PROMPT="dask # " # CONFIG_CMD_SAVEENV is not set CONFIG_LOOPW=y diff --git a/configs/pico-dwarf-imx7d_defconfig b/configs/pico-dwarf-imx7d_defconfig index 6df4d44..13e4d9b 100644 --- a/configs/pico-dwarf-imx7d_defconfig +++ b/configs/pico-dwarf-imx7d_defconfig @@ -85,6 +85,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig index a5b6a30..7dc7e5d 100644 --- a/configs/pico-hobbit-imx7d_defconfig +++ b/configs/pico-hobbit-imx7d_defconfig @@ -85,6 +85,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig index 20c7d45..2353dd7 100644 --- a/configs/pico-imx6_defconfig +++ b/configs/pico-imx6_defconfig @@ -82,6 +82,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_BACKLIGHT is not set # CONFIG_CMD_VIDCONSOLE is not set # CONFIG_VIDEO_BPP8 is not set diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig index 215537e..35021ac 100644 --- a/configs/pico-imx6ul_defconfig +++ b/configs/pico-imx6ul_defconfig @@ -79,6 +79,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y diff --git a/configs/pico-imx7d_bl33_defconfig b/configs/pico-imx7d_bl33_defconfig index 3c669e7..47aeda6 100644 --- a/configs/pico-imx7d_bl33_defconfig +++ b/configs/pico-imx7d_bl33_defconfig @@ -22,6 +22,8 @@ CONFIG_ARMV7_BOOT_SEC_DEFAULT=y CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y @@ -81,6 +83,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig index 8e7e10e..ed20aea 100644 --- a/configs/pico-imx7d_defconfig +++ b/configs/pico-imx7d_defconfig @@ -85,6 +85,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_MXS=y CONFIG_SPLASH_SCREEN=y diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig index 4195370..e2c6790 100644 --- a/configs/pico-imx8mq_defconfig +++ b/configs/pico-imx8mq_defconfig @@ -24,9 +24,14 @@ CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y @@ -54,6 +59,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=1 CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 +CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/pico-nymph-imx7d_defconfig b/configs/pico-nymph-imx7d_defconfig index 6df4d44..13e4d9b 100644 --- a/configs/pico-nymph-imx7d_defconfig +++ b/configs/pico-nymph-imx7d_defconfig @@ -85,6 +85,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig index 40a7232..f74e83e 100644 --- a/configs/pico-pi-imx7d_defconfig +++ b/configs/pico-pi-imx7d_defconfig @@ -85,6 +85,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index d1c2c3c..f42f4e5 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -8,7 +8,6 @@ CONFIG_PINE64_DT_SELECTION=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" CONFIG_PHY_REALTEK=y -CONFIG_RTL8211E_PINE64_GIGABIT_FIX=y CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index fc339d5..3a179fa 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_NR_DRAM_BANKS=2 @@ -18,7 +19,6 @@ CONFIG_SYS_PROMPT="Tegra20 (Plutux) # " # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set @@ -31,6 +31,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_DM=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_TEGRA_NAND=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SYS_NS16550=y CONFIG_USB=y diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig index 070769d..eb07b42 100644 --- a/configs/pm9261_defconfig +++ b/configs/pm9261_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 " +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run flashboot" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index d2f48e3..e8a5b4d 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 " +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run flashboot" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -29,6 +31,8 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_JFFS2=y +CONFIG_JFFS2_DEV="nand0" +CONFIG_JFFS2_PART_SIZE=0x10000000 CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)" CONFIG_OF_CONTROL=y @@ -61,3 +65,4 @@ CONFIG_USB=y CONFIG_DM_VIDEO=y # CONFIG_VIDEO_BPP32 is not set CONFIG_LCD=y +CONFIG_JFFS2_NAND=y diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig index 9382c38..7fbbbab 100644 --- a/configs/pm9g45_defconfig +++ b/configs/pm9g45_defconfig @@ -8,7 +8,6 @@ CONFIG_TARGET_PM9G45=y CONFIG_NR_DRAM_BANKS=1 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek" -CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_DEBUG_UART_BASE=0xffffee00 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 @@ -18,6 +17,8 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="fbcon=rotate:3 console=tty0 console=ttyS0,115200 root=/dev/mtdblock4 mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,1664k(env),2M(linux)ro,-(root) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -46,6 +47,7 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y +CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_DM_ETH=y diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig index 056c190..10f08a5 100644 --- a/configs/pogo_e02_defconfig +++ b/configs/pogo_e02_defconfig @@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/cloudengines/pogo_e02/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_POGO_E02=y @@ -13,6 +14,8 @@ CONFIG_IDENT_STRING="\nPogo E02" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs $(bootargs_console); run bootcmd_usb; bootm 0x00800000 0x01100000" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="PogoE02> " diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig index 98fb823..46988d9 100644 --- a/configs/popmetal-rk3288_defconfig +++ b/configs/popmetal-rk3288_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_NR_DRAM_BANKS=1 diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index 55f6465..d1f928d 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -1,6 +1,8 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xf01000 CONFIG_ENV_SIZE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="qemu-ppce500" +CONFIG_SYS_CLK_FREQ=33000000 CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_QEMU_PPCE500=y @@ -8,6 +10,8 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y @@ -24,7 +28,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_DOS_PARTITION=y CONFIG_OF_CONTROL=y -CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y @@ -53,4 +56,5 @@ CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_NET=y CONFIG_VIRTIO_BLK=y CONFIG_ADDR_MAP=y +# CONFIG_BINMAN_FDT is not set CONFIG_PANIC_HANG=y diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig index 0b8cd19..b892fd6 100644 --- a/configs/qemu-riscv32_defconfig +++ b/configs/qemu-riscv32_defconfig @@ -2,6 +2,7 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="qemu-virt32" CONFIG_TARGET_QEMU_VIRT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x80200000 @@ -11,6 +12,5 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set -CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig index 4d65104..b4856fd 100644 --- a/configs/qemu-riscv32_smode_defconfig +++ b/configs/qemu-riscv32_smode_defconfig @@ -2,6 +2,7 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="qemu-virt32" CONFIG_TARGET_QEMU_VIRT=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y @@ -12,7 +13,6 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set -CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYSRESET_SBI=y diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig index eb64c51..efe8d39 100644 --- a/configs/qemu-riscv32_spl_defconfig +++ b/configs/qemu-riscv32_spl_defconfig @@ -2,10 +2,11 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="qemu-virt" +CONFIG_DEFAULT_DEVICE_TREE="qemu-virt32" CONFIG_SPL=y CONFIG_TARGET_QEMU_VIRT=y CONFIG_RISCV_SMODE=y +# CONFIG_OF_BOARD_FIXUP is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x80200000 CONFIG_FIT=y @@ -14,7 +15,7 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_SBI=y # CONFIG_CMD_MII is not set -CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYSRESET_SBI=y +# CONFIG_BINMAN_FDT is not set diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig index 4faa6da..036484c 100644 --- a/configs/qemu-riscv64_defconfig +++ b/configs/qemu-riscv64_defconfig @@ -2,6 +2,7 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="qemu-virt64" CONFIG_TARGET_QEMU_VIRT=y CONFIG_ARCH_RV64I=y CONFIG_DISTRO_DEFAULTS=y @@ -12,6 +13,5 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set -CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig index f575c12..e519bb6 100644 --- a/configs/qemu-riscv64_smode_defconfig +++ b/configs/qemu-riscv64_smode_defconfig @@ -2,6 +2,7 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="qemu-virt64" CONFIG_TARGET_QEMU_VIRT=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y @@ -15,7 +16,6 @@ CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set -CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYSRESET_SBI=y diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig index 0fbdb75..8b51237 100644 --- a/configs/qemu-riscv64_spl_defconfig +++ b/configs/qemu-riscv64_spl_defconfig @@ -2,7 +2,7 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="qemu-virt" +CONFIG_DEFAULT_DEVICE_TREE="qemu-virt64" CONFIG_SPL=y CONFIG_TARGET_QEMU_VIRT=y CONFIG_ARCH_RV64I=y @@ -15,7 +15,7 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_CMD_SBI=y # CONFIG_CMD_MII is not set -CONFIG_OF_BOARD=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYSRESET_SBI=y +# CONFIG_BINMAN_FDT is not set diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig index e8a6f75..5e41ea9 100644 --- a/configs/qemu_arm64_defconfig +++ b/configs/qemu_arm64_defconfig @@ -5,6 +5,10 @@ CONFIG_SYS_MALLOC_LEN=0x1000000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_SECT_SIZE=0x40000 +CONFIG_DEFAULT_DEVICE_TREE="qemu-arm64" +CONFIG_DEBUG_UART_BASE=0x9000000 +CONFIG_DEBUG_UART_CLOCK=0 +CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x40200000 @@ -25,7 +29,6 @@ CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_TPM=y CONFIG_CMD_MTDPARTS=y -CONFIG_OF_BOARD=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x4000000 CONFIG_SCSI_AHCI=y @@ -48,6 +51,8 @@ CONFIG_PCI=y CONFIG_PCIE_ECAM_GENERIC=y CONFIG_SCSI=y CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_PL011=y +CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_TPM2_MMIO=y diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig index b459305..4197cb0 100644 --- a/configs/qemu_arm_defconfig +++ b/configs/qemu_arm_defconfig @@ -5,8 +5,12 @@ CONFIG_SYS_MALLOC_LEN=0x1000000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_SECT_SIZE=0x40000 +CONFIG_DEFAULT_DEVICE_TREE="qemu-arm" CONFIG_TARGET_QEMU_ARM_32BIT=y +CONFIG_DEBUG_UART_BASE=0x9000000 +CONFIG_DEBUG_UART_CLOCK=0 CONFIG_ARMV7_LPAE=y +CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x40200000 @@ -27,7 +31,6 @@ CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_TPM=y CONFIG_CMD_MTDPARTS=y -CONFIG_OF_BOARD=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0x4000000 CONFIG_SCSI_AHCI=y @@ -50,6 +53,8 @@ CONFIG_PCI=y CONFIG_PCIE_ECAM_GENERIC=y CONFIG_SCSI=y CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_PL011=y +CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_TPM2_MMIO=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 7d06dea..9e2036a 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_LEN=0x100000 CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DEFAULT_DEVICE_TREE="sh7751-r2dplus" +CONFIG_SYS_CLK_FREQ=60000000 CONFIG_TARGET_R2DPLUS=y CONFIG_SYS_LOAD_ADDR=0x8e000000 CONFIG_BOOTDELAY=-1 diff --git a/configs/r8a77970_eagle_defconfig b/configs/r8a77970_eagle_defconfig index b47745b..07a0b09 100644 --- a/configs/r8a77970_eagle_defconfig +++ b/configs/r8a77970_eagle_defconfig @@ -16,6 +16,8 @@ CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77970-eagle.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77970-eagle.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/r8a77980_condor_defconfig b/configs/r8a77980_condor_defconfig index 22815d7..582d717 100644 --- a/configs/r8a77980_condor_defconfig +++ b/configs/r8a77980_condor_defconfig @@ -16,6 +16,8 @@ CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77980-condor.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77980-condor.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_HUSH_PARSER=y diff --git a/configs/r8a77990_ebisu_defconfig b/configs/r8a77990_ebisu_defconfig index 0c1e5a1..79ec700 100644 --- a/configs/r8a77990_ebisu_defconfig +++ b/configs/r8a77990_ebisu_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77990-ebisu.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77990-ebisu.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_UPDATE_TFTP=y @@ -67,6 +69,7 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y +CONFIG_SYS_FLASH_CFI=y CONFIG_RENESAS_RPC_HF=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/r8a77995_draak_defconfig b/configs/r8a77995_draak_defconfig index fcf4268..726609a 100644 --- a/configs/r8a77995_draak_defconfig +++ b/configs/r8a77995_draak_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77995-draak.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77995-draak.dtb" CONFIG_UPDATE_TFTP=y CONFIG_HUSH_PARSER=y diff --git a/configs/r8a779a0_falcon_defconfig b/configs/r8a779a0_falcon_defconfig index bad5585..e857da9 100644 --- a/configs/r8a779a0_falcon_defconfig +++ b/configs/r8a779a0_falcon_defconfig @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="r8a779a0-falcon-u-boot" CONFIG_SPL_TEXT_BASE=0xe6338000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_FALCON=y +CONFIG_SYS_CLK_FREQ=16666666 # CONFIG_PSCI_RESET is not set CONFIG_ARMV8_PSCI=y CONFIG_SYS_LOAD_ADDR=0x58000000 @@ -18,6 +19,8 @@ CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a779a0-falcon.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a779a0-falcon.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/rcar3_salvator-x_defconfig b/configs/rcar3_salvator-x_defconfig index 2b2c273..57a2c01 100644 --- a/configs/rcar3_salvator-x_defconfig +++ b/configs/rcar3_salvator-x_defconfig @@ -13,6 +13,8 @@ CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77950-salvator-x.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77950-salvator-x.dtb" CONFIG_UPDATE_TFTP=y CONFIG_HUSH_PARSER=y @@ -68,6 +70,7 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y +CONFIG_SYS_FLASH_CFI=y CONFIG_RENESAS_RPC_HF=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/rcar3_ulcb_defconfig b/configs/rcar3_ulcb_defconfig index 0a9bed3..b18ef38 100644 --- a/configs/rcar3_ulcb_defconfig +++ b/configs/rcar3_ulcb_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77950-ulcb.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77950-ulcb.dtb" CONFIG_UPDATE_TFTP=y CONFIG_HUSH_PARSER=y @@ -69,6 +71,7 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y +CONFIG_SYS_FLASH_CFI=y CONFIG_RENESAS_RPC_HF=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index 0dd538e..3c277ed 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -69,6 +69,7 @@ CONFIG_USB=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_BACKLIGHT is not set # CONFIG_CMD_VIDCONSOLE is not set # CONFIG_VIDEO_BPP8 is not set diff --git a/configs/roc-cc-rk3308_defconfig b/configs/roc-cc-rk3308_defconfig index c867cff..9449264 100644 --- a/configs/roc-cc-rk3308_defconfig +++ b/configs/roc-cc-rk3308_defconfig @@ -49,6 +49,7 @@ CONFIG_CLK=y # CONFIG_USB_FUNCTION_FASTBOOT is not set CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_DM_ETH=y diff --git a/configs/rock-pi-n8-rk3288_defconfig b/configs/rock-pi-n8-rk3288_defconfig index c060941..ab29c5b 100644 --- a/configs/rock-pi-n8-rk3288_defconfig +++ b/configs/rock-pi-n8-rk3288_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set # CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_ROCKCHIP=y diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig index c9a5ba2..b97aa6b 100644 --- a/configs/rock2_defconfig +++ b/configs/rock2_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_NR_DRAM_BANKS=1 diff --git a/configs/rock_defconfig b/configs/rock_defconfig index bc97636..46df669 100644 --- a/configs/rock_defconfig +++ b/configs/rock_defconfig @@ -55,6 +55,7 @@ CONFIG_REGULATOR_ACT8846=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_RAM=y CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_ROCKCHIP_SERIAL=y CONFIG_SYSRESET=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig index 6d76d12..195541c 100644 --- a/configs/rpi_0_w_defconfig +++ b/configs/rpi_0_w_defconfig @@ -13,6 +13,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 1931607..eb63fbd 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -14,6 +14,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig index 060fd36..4610289 100644 --- a/configs/rpi_3_32b_defconfig +++ b/configs/rpi_3_32b_defconfig @@ -15,6 +15,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig index 0a69f97..91b63b6 100644 --- a/configs/rpi_3_b_plus_defconfig +++ b/configs/rpi_3_b_plus_defconfig @@ -14,6 +14,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig index 8016fe1..528b12e 100644 --- a/configs/rpi_3_defconfig +++ b/configs/rpi_3_defconfig @@ -14,6 +14,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig index 990589d..8f87a43 100644 --- a/configs/rpi_4_32b_defconfig +++ b/configs/rpi_4_32b_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x00008000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_RPI_4_32B=y CONFIG_ENV_SIZE=0x4000 +CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y @@ -12,6 +13,7 @@ CONFIG_PREBOOT="pci enum; usb start;" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y @@ -19,7 +21,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y -CONFIG_OF_BOARD=y CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig index 0720505..461a765 100644 --- a/configs/rpi_4_defconfig +++ b/configs/rpi_4_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x00080000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_RPI_4=y CONFIG_ENV_SIZE=0x4000 +CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y @@ -12,6 +13,7 @@ CONFIG_PREBOOT="pci enum; usb start;" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y @@ -19,7 +21,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y -CONFIG_OF_BOARD=y CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig index 06ae3e9..351d247 100644 --- a/configs/rpi_arm64_defconfig +++ b/configs/rpi_arm64_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x00080000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_RPI_ARM64=y CONFIG_ENV_SIZE=0x4000 +CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_BOARD_SETUP=y @@ -12,13 +13,13 @@ CONFIG_PREBOOT="pci enum; usb start;" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y -CONFIG_OF_BOARD=y CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_TFTP_TSIZE=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 8acf04d..0baef3b 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -13,6 +13,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig index 6c48c3b..e1af7b4 100644 --- a/configs/rzg2_beacon_defconfig +++ b/configs/rzg2_beacon_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_LOAD_ADDR=0x58000000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_DEFAULT_FDT_FILE="r8a774a1-beacon-rzg2m-kit.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_HUSH_PARSER=y diff --git a/configs/s5p4418_nanopi2_defconfig b/configs/s5p4418_nanopi2_defconfig index fa59cfd..0e17e75 100644 --- a/configs/s5p4418_nanopi2_defconfig +++ b/configs/s5p4418_nanopi2_defconfig @@ -50,6 +50,7 @@ CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y CONFIG_CONS_INDEX=0 CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y CONFIG_DISPLAY=y CONFIG_VIDEO_NX=y CONFIG_VIDEO_NX_RGB=y diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index ed5045c..80f693e 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -13,6 +13,8 @@ CONFIG_SYS_LOAD_ADDR=0x34000000 # CONFIG_AUTOBOOT is not set CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock8 rootfstype=ext4 ${console} ${meminfo} ${mtdparts}" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run mmcboot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index 87001d3..3c0c7b5 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_EXYNOS=y CONFIG_SYS_TEXT_BASE=0x44800000 CONFIG_SYS_MALLOC_LEN=0x5001000 @@ -14,7 +15,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x44800000 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="Please use defined boot" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run mmcboot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_MISC_INIT_R=y @@ -45,6 +46,7 @@ CONFIG_MMC_SDHCI_S5P=y CONFIG_MTD=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_MAX8998=y +CONFIG_SOFT_SPI=y CONFIG_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Samsung" diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig index d417899..59fc4a9 100644 --- a/configs/sam9x60ek_mmc_defconfig +++ b/configs/sam9x60ek_mmc_defconfig @@ -19,13 +19,17 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sam9x60ek.dtb;fatload mmc 0:1 0x22000000 zImage;bootz 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y +CONFIG_CMD_CLK=y CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig index 590e887..48b6a6a 100644 --- a/configs/sam9x60ek_nandflash_defconfig +++ b/configs/sam9x60ek_nandflash_defconfig @@ -19,14 +19,18 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000 0x180000 0x20000; bootz 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y +CONFIG_CMD_CLK=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig index 292a1ab..4e46e46 100644 --- a/configs/sam9x60ek_qspiflash_defconfig +++ b/configs/sam9x60ek_qspiflash_defconfig @@ -20,14 +20,18 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x180000 0x80000; sf read 0x22000000 0x200000 0x600000; bootz 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y +CONFIG_CMD_CLK=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y @@ -42,14 +46,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_CLK=y diff --git a/configs/sama5d27_giantboard_defconfig b/configs/sama5d27_giantboard_defconfig index 9e0eb67..9ca984c1 100644 --- a/configs/sama5d27_giantboard_defconfig +++ b/configs/sama5d27_giantboard_defconfig @@ -34,6 +34,8 @@ CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0 0x22000000 at91-sama5d27_giantboard.dtb; fatload mmc 0 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d27_som1_ek_mmc1_defconfig b/configs/sama5d27_som1_ek_mmc1_defconfig index fe2ca07..afcd41a 100644 --- a/configs/sama5d27_som1_ek_mmc1_defconfig +++ b/configs/sama5d27_som1_ek_mmc1_defconfig @@ -30,11 +30,15 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 1 0x22000000 at91-sama5d27_som1_ek.dtb; fatload mmc 1 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d27_som1_ek_mmc_defconfig b/configs/sama5d27_som1_ek_mmc_defconfig index d685391..149e480 100644 --- a/configs/sama5d27_som1_ek_mmc_defconfig +++ b/configs/sama5d27_som1_ek_mmc_defconfig @@ -31,11 +31,15 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0 0x22000000 at91-sama5d27_som1_ek.dtb; fatload mmc 0 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d27_som1_ek_qspiflash_defconfig b/configs/sama5d27_som1_ek_qspiflash_defconfig index bd59526..3fb79be 100644 --- a/configs/sama5d27_som1_ek_qspiflash_defconfig +++ b/configs/sama5d27_som1_ek_qspiflash_defconfig @@ -35,7 +35,9 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwai CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y @@ -50,14 +52,7 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SPL_DM=y diff --git a/configs/sama5d27_wlsom1_ek_mmc_defconfig b/configs/sama5d27_wlsom1_ek_mmc_defconfig index 75a8075..d1dee02 100644 --- a/configs/sama5d27_wlsom1_ek_mmc_defconfig +++ b/configs/sama5d27_wlsom1_ek_mmc_defconfig @@ -29,6 +29,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y @@ -37,7 +39,9 @@ CONFIG_SPL_DISPLAY_PRINT=y CONFIG_SPL_AT91_MCK_BYPASS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig index 42ebb1a..700aef7 100644 --- a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig +++ b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig @@ -29,6 +29,8 @@ CONFIG_QSPI_BOOT=y CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y @@ -40,7 +42,9 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_AT91_MCK_BYPASS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y @@ -56,14 +60,6 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=2 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=50000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SPL_DM=y diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig index 2e699a7..7761a57 100644 --- a/configs/sama5d2_icp_mmc_defconfig +++ b/configs/sama5d2_icp_mmc_defconfig @@ -29,6 +29,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SPL_DISPLAY_PRINT=y @@ -39,6 +41,8 @@ CONFIG_SPL_AT91_MCK_BYPASS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set +CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d2_icp_qspiflash_defconfig b/configs/sama5d2_icp_qspiflash_defconfig index 7722a5e..88bbbb4 100644 --- a/configs/sama5d2_icp_qspiflash_defconfig +++ b/configs/sama5d2_icp_qspiflash_defconfig @@ -24,6 +24,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlycon earlyprintk=serial,ttyS0, ignore_loglevel root=/dev/mmcblk0p2 memtest=0 rootfstype=ext4 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y @@ -51,14 +53,6 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=2 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=66000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_CLK=y diff --git a/configs/sama5d2_ptc_ek_mmc_defconfig b/configs/sama5d2_ptc_ek_mmc_defconfig index 5a8e20a..9f458e1 100644 --- a/configs/sama5d2_ptc_ek_mmc_defconfig +++ b/configs/sama5d2_ptc_ek_mmc_defconfig @@ -21,12 +21,16 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d2_ptc_ek_nandflash_defconfig b/configs/sama5d2_ptc_ek_nandflash_defconfig index 4d09a97..6460ff3 100644 --- a/configs/sama5d2_ptc_ek_nandflash_defconfig +++ b/configs/sama5d2_ptc_ek_nandflash_defconfig @@ -21,12 +21,16 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig index 8e1b3a5..844a9cd 100644 --- a/configs/sama5d2_xplained_emmc_defconfig +++ b/configs/sama5d2_xplained_emmc_defconfig @@ -30,10 +30,14 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x22000000 at91-sama5d2_xplained.dtb; fatload mmc 0:1 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index 18e3c37..0de0636 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -31,11 +31,15 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 1:1 0x22000000 at91-sama5d2_xplained.dtb; fatload mmc 1:1 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig index 6a5e0f9..a6e002e 100644 --- a/configs/sama5d2_xplained_qspiflash_defconfig +++ b/configs/sama5d2_xplained_qspiflash_defconfig @@ -31,11 +31,15 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 1:0; sf read 0x22000000 0x180000 0x80000; sf read 0x23000000 0x200000 0x600000; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index 65dcf39..676385f 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -32,6 +32,8 @@ CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext4load mmc 0:1 0x22000000 /boot/at91-sama5d2_xplained.dtb; ext4load mmc 0:1 0x23000000 /boot/zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SPL_DM_SPI_FLASH=y @@ -39,7 +41,9 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y diff --git a/configs/sama5d36ek_cmp_mmc_defconfig b/configs/sama5d36ek_cmp_mmc_defconfig index db31942..1967352 100644 --- a/configs/sama5d36ek_cmp_mmc_defconfig +++ b/configs/sama5d36ek_cmp_mmc_defconfig @@ -20,6 +20,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/sama5d36ek_cmp_nandflash_defconfig b/configs/sama5d36ek_cmp_nandflash_defconfig index 84260c2..a7cf6b2 100644 --- a/configs/sama5d36ek_cmp_nandflash_defconfig +++ b/configs/sama5d36ek_cmp_nandflash_defconfig @@ -20,6 +20,8 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/sama5d36ek_cmp_spiflash_defconfig b/configs/sama5d36ek_cmp_spiflash_defconfig index a66d523..33ce03c 100644 --- a/configs/sama5d36ek_cmp_spiflash_defconfig +++ b/configs/sama5d36ek_cmp_spiflash_defconfig @@ -22,6 +22,8 @@ CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig index e0b6961..7660dbe 100644 --- a/configs/sama5d3_xplained_mmc_defconfig +++ b/configs/sama5d3_xplained_mmc_defconfig @@ -30,6 +30,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig index 75dfc80..97361a0 100644 --- a/configs/sama5d3_xplained_nandflash_defconfig +++ b/configs/sama5d3_xplained_nandflash_defconfig @@ -27,6 +27,8 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig index 7cc69e9..7828bfd 100644 --- a/configs/sama5d3xek_mmc_defconfig +++ b/configs/sama5d3xek_mmc_defconfig @@ -30,6 +30,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig index aab4b99..5e2b79e 100644 --- a/configs/sama5d3xek_nandflash_defconfig +++ b/configs/sama5d3xek_nandflash_defconfig @@ -27,6 +27,8 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig index 54461f0..bffcc49 100644 --- a/configs/sama5d3xek_spiflash_defconfig +++ b/configs/sama5d3xek_spiflash_defconfig @@ -32,6 +32,8 @@ CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index d9f58ef..c664274 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -30,6 +30,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 5e605d7..c6cb19e 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -27,6 +27,8 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SPL_NAND_SUPPORT=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index a9f8d87..3a7da73 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -32,6 +32,8 @@ CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SPL_DM_SPI_FLASH=y diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index ed5955d..b0689fb 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -30,6 +30,8 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index c39ad41..a853026 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -27,6 +27,8 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index e1f66a2..b36f4b5 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -32,6 +32,8 @@ CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index c390afe..4f41358 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -285,6 +285,8 @@ CONFIG_OSD=y CONFIG_SANDBOX_OSD=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_VIDEO_BMP_RLE8=y +CONFIG_BMP_16BPP=y +CONFIG_BMP_24BPP=y CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig index 7cc76bf..4d5a73f 100644 --- a/configs/sandbox_flattree_defconfig +++ b/configs/sandbox_flattree_defconfig @@ -198,11 +198,14 @@ CONFIG_VIDEO_SANDBOX_SDL=y CONFIG_OSD=y CONFIG_SANDBOX_OSD=y CONFIG_VIDEO_BMP_RLE8=y +CONFIG_BMP_16BPP=y +CONFIG_BMP_24BPP=y CONFIG_CMD_DHRYSTONE=y CONFIG_RSA_VERIFY_WITH_PKEY=y CONFIG_TPM=y CONFIG_LZ4=y CONFIG_ERRNO_STR=y +CONFIG_HEXDUMP=y CONFIG_UNIT_TEST=y CONFIG_UT_TIME=y CONFIG_UT_DM=y diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index f915b5b..f3d3b0a 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_NR_DRAM_BANKS=2 @@ -17,7 +18,6 @@ CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set @@ -35,6 +35,7 @@ CONFIG_SYS_I2C_TEGRA=y CONFIG_TEGRA_KEYBOARD=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_TEGRA_NAND=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y diff --git a/configs/seeed_npi_imx6ull_defconfig b/configs/seeed_npi_imx6ull_defconfig index 6489e8b..d417a5c 100644 --- a/configs/seeed_npi_imx6ull_defconfig +++ b/configs/seeed_npi_imx6ull_defconfig @@ -19,7 +19,6 @@ CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 24d416e..6e39aa1 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_KWD_CONFIG="board/Marvell/sheevaplug/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_SHEEVAPLUG=y @@ -14,6 +15,8 @@ CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" # CONFIG_SYS_MALLOC_F is not set CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/sifive_unleashed_defconfig b/configs/sifive_unleashed_defconfig index 1d17f2d..58c6212 100644 --- a/configs/sifive_unleashed_defconfig +++ b/configs/sifive_unleashed_defconfig @@ -16,6 +16,8 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};" CONFIG_DEFAULT_FDT_FILE="sifive/hifive-unleashed-a00.dtb" CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig index d400ed0..2995808 100644 --- a/configs/sifive_unmatched_defconfig +++ b/configs/sifive_unmatched_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_MMC=y CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_SYS_PCI_64BIT=y CONFIG_AHCI=y CONFIG_TARGET_SIFIVE_UNMATCHED=y CONFIG_ARCH_RV64I=y @@ -18,6 +19,8 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};" CONFIG_DEFAULT_FDT_FILE="sifive/hifive-unmatched-a00.dtb" CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y @@ -33,14 +36,13 @@ CONFIG_CMD_PWM=y CONFIG_CMD_GPT_RENAME=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SCSI_AHCI=y CONFIG_AHCI_PCI=y CONFIG_SPL_CLK=y -CONFIG_SPI_FLASH_ISSI=y CONFIG_SYS_I2C_EEPROM_ADDR=0x54 +CONFIG_SPI_FLASH_ISSI=y CONFIG_E1000=y CONFIG_NVME=y CONFIG_PCI=y diff --git a/configs/silinux_ek874_defconfig b/configs/silinux_ek874_defconfig index eecddba..894a996 100644 --- a/configs/silinux_ek874_defconfig +++ b/configs/silinux_ek874_defconfig @@ -17,6 +17,8 @@ CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a774c0-ek874.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a774c0-ek874.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_HUSH_PARSER=y diff --git a/configs/slimbootloader_defconfig b/configs/slimbootloader_defconfig index 5cfbaa2..fb2091b 100644 --- a/configs/slimbootloader_defconfig +++ b/configs/slimbootloader_defconfig @@ -7,6 +7,8 @@ CONFIG_TARGET_SLIMBOOTLOADER=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if test ${bootdev} = 'usb'; then ${bootdev} start; fi; if test ${bootdev} = 'scsi'; then ${bootdev} scan; fi; ${bootdev} info; ${bootfsload} ${bootdev} ${bootdevnum}:${bootdevpart} ${loadaddr} ${bootfile}; ${bootfsload} ${bootdev} ${bootdevnum}:${bootdevpart} ${ramdiskaddr} ${ramdiskfile}; zboot ${loadaddr} 0 ${ramdiskaddr} ${filesize}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index af6e925..0e99c36 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -27,6 +27,8 @@ CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run flashboot" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_NAND_SUPPORT=y diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index 9429114..26a2060 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -39,10 +39,10 @@ CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_I2C_S3C24X0=y +# CONFIG_KEYBOARD is not set CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index e62f432..34aacc6 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -34,10 +34,10 @@ CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_I2C_S3C24X0=y +# CONFIG_KEYBOARD is not set CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig index 8e0b999..f2d0845 100644 --- a/configs/smdkc100_defconfig +++ b/configs/smdkc100_defconfig @@ -8,10 +8,13 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100" CONFIG_TARGET_SMDKC100=y CONFIG_IDENT_STRING=" for SMDKC100" +CONFIG_SYS_CLK_FREQ=12000000 CONFIG_SYS_LOAD_ADDR=0x30000000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock5 ubi.mtd=4 rootfstype=cramfs console=ttySAC0,115200n8 mem=128M mtdparts=s3c-onenand:256k(bootloader),128k@0x40000(params),3m@0x60000(kernel),16m@0x360000(test),-(UBI)" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run ubifsboot" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="SMDKC100 # " diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig index 2f2b4de..add0585 100644 --- a/configs/smdkv310_defconfig +++ b/configs/smdkv310_defconfig @@ -14,7 +14,7 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" for SMDKC210/V310" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x43e00000 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="fatload mmc 0 40007000 uImage; bootm 40007000" # CONFIG_SPL_FRAMEWORK is not set CONFIG_SYS_PROMPT="SMDKV310 # " # CONFIG_CMD_XIMG is not set diff --git a/configs/smegw01_defconfig b/configs/smegw01_defconfig index 2288c58..829cb4a 100644 --- a/configs/smegw01_defconfig +++ b/configs/smegw01_defconfig @@ -17,6 +17,8 @@ CONFIG_IMX_BOOTAUX=y CONFIG_IMX_HAB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if run loadimage; then run mmcboot; fi; " CONFIG_HUSH_PARSER=y # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index 354f290..5b03088 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -8,7 +8,7 @@ CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_TARGET_SNIPER=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="setenv boot_mmc_part ${kernel_mmc_part}; if test reboot-${reboot-mode} = reboot-r; then echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; if test reboot-${reboot-mode} = reboot-b; then echo fastboot; fastboot 0; fi; part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; mmc dev ${boot_mmc_dev}; mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && bootm ${kernel_addr_r};" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y diff --git a/configs/snow_defconfig b/configs/snow_defconfig index e5bac37..2b98401 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -43,7 +43,6 @@ CONFIG_CMD_TPM_TEST=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_I2C_CROS_EC_LDO=y diff --git a/configs/socfpga_dbm_soc1_defconfig b/configs/socfpga_dbm_soc1_defconfig index 78b7cc7..baae2f2 100644 --- a/configs/socfpga_dbm_soc1_defconfig +++ b/configs/socfpga_dbm_soc1_defconfig @@ -10,6 +10,8 @@ CONFIG_TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1=y CONFIG_FIT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run mmc_mmc" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run try_bootscript" CONFIG_SYS_CONSOLE_IS_IN_ENV=y diff --git a/configs/socfpga_mcvevk_defconfig b/configs/socfpga_mcvevk_defconfig index 12817e5..2a2899d 100644 --- a/configs/socfpga_mcvevk_defconfig +++ b/configs/socfpga_mcvevk_defconfig @@ -11,7 +11,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run mmc_mmc" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig index db48006..f7bdb90 100644 --- a/configs/socfpga_secu1_defconfig +++ b/configs/socfpga_secu1_defconfig @@ -19,7 +19,7 @@ CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_FIT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 ubi.fm_autoconvert=1 uio_pdrv_genirq.of_id=\"idq,regbank\"" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="setenv bootcmd 'bridge enable; if test ${bootnum} = 'b'; then run _fpga_loadsafe; else if test ${bootcount} -eq 4; then echo 'Switching copy...'; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; run _fpga_loaduser; fi;echo 'Booting bank $bootnum' && run userload && run userboot;' && setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && saveenv && saveenv && boot;" CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_secu1.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y @@ -29,7 +29,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set -# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is not set +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1 +# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y @@ -92,6 +93,7 @@ CONFIG_RTC_M41T62=y CONFIG_SPI=y CONFIG_SPI_MEM=y CONFIG_DESIGNWARE_SPI=y +CONFIG_WATCHDOG_TIMEOUT_MSECS=60000 CONFIG_DESIGNWARE_WATCHDOG=y CONFIG_WDT=y # CONFIG_GZIP is not set diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig index 83dc267..e647314 100644 --- a/configs/socfpga_vining_fpga_defconfig +++ b/configs/socfpga_vining_fpga_defconfig @@ -14,7 +14,7 @@ CONFIG_FIT=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run selboot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv hostname vining-${unit_serial} ; setenv PS1 \"${unit_ident} (${unit_serial}) => \" ; if gpio input 78 ; then setenv bootdelay 10 ; setenv boottype rcvr ; elif test -n \"$force_boottype\" ; then setenv bootdelay 1 ; setenv boottype \"$force_boottype\" ; setenv force_boottype ; saveenv ; else setenv bootdelay 5 ; setenv boottype norm ; fi" CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -76,7 +76,6 @@ CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_MMC_DW=y CONFIG_MTD=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig index 72c0717..ea0224d 100644 --- a/configs/socrates_defconfig +++ b/configs/socrates_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_TEXT_BASE=0xfff80000 CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="socrates" +# CONFIG_SYS_PCI_64BIT is not set CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_SOCRATES=y @@ -10,6 +11,8 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run boot_nor" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo;echo Welcome on the ABB Socrates Board;echo" CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -42,6 +45,18 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xFFF40000 CONFIG_ENV_ADDR_REDUND=0xFFF20000 CONFIG_DM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xFE001001 +CONFIG_SYS_OR0_PRELIM=0xFE000030 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xFC001001 +CONFIG_SYS_OR1_PRELIM=0xFE000030 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xC80018A1 +CONFIG_SYS_OR2_PRELIM=0xFC000000 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xC0001881 +CONFIG_SYS_OR3_PRELIM=0xFFF00000 CONFIG_DM_I2C=y CONFIG_SYS_I2C_FSL=y # CONFIG_MMC is not set diff --git a/configs/som-db5800-som-6867_defconfig b/configs/som-db5800-som-6867_defconfig index a053718..9c9b397 100644 --- a/configs/som-db5800-som-6867_defconfig +++ b/configs/som-db5800-som-6867_defconfig @@ -23,6 +23,8 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/somlabs_visionsom_6ull_defconfig b/configs/somlabs_visionsom_6ull_defconfig index 7dad016..956a6ca 100644 --- a/configs/somlabs_visionsom_6ull_defconfig +++ b/configs/somlabs_visionsom_6ull_defconfig @@ -12,6 +12,8 @@ CONFIG_TARGET_SOMLABS_VISIONSOM_6ULL=y CONFIG_DEFAULT_DEVICE_TREE="imx6ull-somlabs-visionsom" CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run setfdtfile; run checkbootdev; run loadfdt;if run loadbootscript; then run bootscript; else if run loadimage; then run setbootargs; bootz ${loadaddr} - ${fdt_addr}; fi; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/spring_defconfig b/configs/spring_defconfig index 8838b55..ef5688f 100644 --- a/configs/spring_defconfig +++ b/configs/spring_defconfig @@ -43,7 +43,6 @@ CONFIG_CMD_TPM_TEST=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_I2C_CROS_EC_LDO=y diff --git a/configs/stm32f429-evaluation_defconfig b/configs/stm32f429-evaluation_defconfig index 71f0bd0..a1afb5e 100644 --- a/configs/stm32f429-evaluation_defconfig +++ b/configs/stm32f429-evaluation_defconfig @@ -11,7 +11,6 @@ CONFIG_TARGET_STM32F429_EVALUATION=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x400000 CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/stm32f469-discovery_defconfig b/configs/stm32f469-discovery_defconfig index 7dcf12d..3304264 100644 --- a/configs/stm32f469-discovery_defconfig +++ b/configs/stm32f469-discovery_defconfig @@ -11,7 +11,6 @@ CONFIG_TARGET_STM32F469_DISCOVERY=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x400000 CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig index 352a3d4..ee7e329 100644 --- a/configs/stm32f746-disco_defconfig +++ b/configs/stm32f746-disco_defconfig @@ -17,7 +17,6 @@ CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" -# CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_LATE_INIT=y CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig index 07ec261..0ba0184 100644 --- a/configs/stm32f769-disco_defconfig +++ b/configs/stm32f769-disco_defconfig @@ -17,7 +17,6 @@ CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" -# CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="U-Boot > " CONFIG_CMD_GPT=y diff --git a/configs/stm32h743-disco_defconfig b/configs/stm32h743-disco_defconfig index 4ec045a..62a826e 100644 --- a/configs/stm32h743-disco_defconfig +++ b/configs/stm32h743-disco_defconfig @@ -14,7 +14,6 @@ CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_DEFAULT_FDT_FILE="stm32h743i-disco" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/stm32h743-eval_defconfig b/configs/stm32h743-eval_defconfig index 1176feb..2fe83e1 100644 --- a/configs/stm32h743-eval_defconfig +++ b/configs/stm32h743-eval_defconfig @@ -14,7 +14,6 @@ CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_USE_BOOTCOMMAND is not set CONFIG_DEFAULT_FDT_FILE="stm32h743i-eval" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig index adb8f10..11a2885 100644 --- a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig @@ -51,8 +51,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig index dca35db..7973e0f 100644 --- a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig @@ -51,8 +51,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig index aa6a28e..5eadd63 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig @@ -51,8 +51,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig index 9abd1a1..1dde46a 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig @@ -51,8 +51,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 2cc26d4..341aaf3 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -34,6 +34,7 @@ CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_FLASH_MTD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y @@ -102,8 +103,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig index 4c6a52f..db1947f 100644 --- a/configs/stm32mp15_defconfig +++ b/configs/stm32mp15_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y @@ -84,8 +85,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 8437558..c422c47 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -69,14 +69,6 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=nor0:256k(fsbl1),256k(fsbl2),1408k(uboot),64k( CONFIG_OF_LIST="stm32mp15xx-dhcom-pdk2 stm32mp15xx-dhcom-drc02 stm32mp15xx-dhcom-picoitx" CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=50000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y @@ -96,8 +88,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 2356de7..38b050f 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -66,14 +66,6 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=nor0:256k(fsbl1),256k(fsbl2),1408k(uboot),64k( # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=50000000 -CONFIG_USE_ENV_SPI_MODE=y -CONFIG_ENV_SPI_MODE=0x0 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y @@ -92,8 +84,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x53 CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index feca26e..b6a5b61 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y @@ -85,8 +86,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y CONFIG_STM32_FMC2_EBI=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_STM32_SDMMC2=y diff --git a/configs/stmark2_defconfig b/configs/stmark2_defconfig index e7b68cd..53510ea 100644 --- a/configs/stmark2_defconfig +++ b/configs/stmark2_defconfig @@ -10,6 +10,8 @@ CONFIG_SYS_LOAD_ADDR=0x40010000 CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=30000000" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit=/bin/init devtmpfs.mount=1" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe 0:1 50000000; sf read ${loadaddr} 0x100000 ${kern_size}; bootm ${loadaddr}" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set @@ -27,7 +29,6 @@ CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:1m(u-boot),7m(kernel),-(rootfs)" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_CS=y CONFIG_ENV_SPI_CS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig index f46efa6..fa1ae10 100644 --- a/configs/stv0991_defconfig +++ b/configs/stv0991_defconfig @@ -16,6 +16,8 @@ CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="go 0x40040000" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig index 4fb0fba..da57dc2 100644 --- a/configs/synquacer_developerbox_defconfig +++ b/configs/synquacer_developerbox_defconfig @@ -40,10 +40,6 @@ CONFIG_CMD_LOG=y CONFIG_PARTITION_TYPE_GUID=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_BUS=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_USE_ENV_SPI_CS=y -CONFIG_ENV_SPI_CS=0 CONFIG_PROT_UDP=y CONFIG_SCSI_AHCI=y CONFIG_AHCI_PCI=y diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index 6e4e101..4eb113f 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_VENDOR="opalkelly" CONFIG_SYS_CONFIG_NAME="syzygy_hub" CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_DM_GPIO=y diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index c623a54..e1278f2 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -94,6 +94,7 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_LOGO is not set # CONFIG_BACKLIGHT is not set # CONFIG_CMD_VIDCONSOLE is not set # CONFIG_VIDEO_BPP8 is not set diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index df9c242..ea568d4 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/tec_defconfig b/configs/tec_defconfig index 7e2aef2..ec6ecbc 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_NR_DRAM_BANKS=2 @@ -17,7 +18,6 @@ CONFIG_SYS_PROMPT="Tegra20 (TEC) # " # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set @@ -32,6 +32,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_DM=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_TEGRA_NAND=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig index 556c91f..a781f15 100644 --- a/configs/theadorable_debug_defconfig +++ b/configs/theadorable_debug_defconfig @@ -49,7 +49,6 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y @@ -58,10 +57,8 @@ CONFIG_SATA_MV=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y CONFIG_FPGA_ALTERA=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y -CONFIG_SYS_I2C_SLAVE=0x0 # CONFIG_MMC is not set CONFIG_SF_DEFAULT_SPEED=27777777 CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index 9e2613a..9631395 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -15,13 +15,14 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x1E0000 +CONFIG_SYS_CLK_FREQ=27000000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyO2,115200n8 noinitrd earlyprintk" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="mmc rescan;fatload mmc 0 ${loadaddr} uImage;bootm ${loadaddr}" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_MISC_INIT_R is not set diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index a9c9a12..85dcb9e 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_SPL_GPIO=y diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig index f367c93..8d8cbd7 100644 --- a/configs/tinker-s-rk3288_defconfig +++ b/configs/tinker-s-rk3288_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_SYS_MALLOC_F_LEN=0x4000 diff --git a/configs/tools-only_defconfig b/configs/tools-only_defconfig index f482c9a..5ffc625 100644 --- a/configs/tools-only_defconfig +++ b/configs/tools-only_defconfig @@ -6,28 +6,29 @@ CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_MISC_INIT_F=y # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_ELF is not set # CONFIG_CMD_EXTENSION is not set -CONFIG_BOOTP_DNS2=y # CONFIG_CMD_DATE is not set CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_BOOTP_SEND_HOSTNAME=y -CONFIG_IP_DEFRAG=y +# CONFIG_NET is not set # CONFIG_ACPIGEN is not set CONFIG_AXI=y CONFIG_AXI_SANDBOX=y -# CONFIG_UDP_FUNCTION_FASTBOOT is not set CONFIG_SANDBOX_GPIO=y CONFIG_PCI=y CONFIG_PCI_SANDBOX=y CONFIG_DM_RTC=y CONFIG_SOUND=y CONFIG_SYSRESET=y +CONFIG_TIMER=y CONFIG_I2C_EDID=y # CONFIG_VIRTIO_MMIO is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_SANDBOX is not set +# CONFIG_EFI_LOADER is not set diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index f8ba64d..dfd465c 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_VENDOR="topic" CONFIG_SYS_CONFIG_NAME="topic_miami" CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_SYS_MEMTEST_START=0x00000000 @@ -20,6 +21,7 @@ CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_BOOTDELAY=0 +CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot" CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig index 94d7afd..bf336c7b 100644 --- a/configs/topic_miamilite_defconfig +++ b/configs/topic_miamilite_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_VENDOR="topic" CONFIG_SYS_CONFIG_NAME="topic_miami" CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_SYS_MEMTEST_START=0x00000000 @@ -20,6 +21,7 @@ CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_BOOTDELAY=0 +CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot" CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index dc03caa..c700ea4 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_VENDOR="topic" CONFIG_SYS_CONFIG_NAME="topic_miami" CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_SYS_MEMTEST_START=0x00000000 @@ -20,6 +21,7 @@ CONFIG_SYS_CUSTOM_LDSCRIPT=y CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_BOOTDELAY=0 +CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot" CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/total_compute_defconfig b/configs/total_compute_defconfig index 7c70eb0..8fafee0 100644 --- a/configs/total_compute_defconfig +++ b/configs/total_compute_defconfig @@ -15,7 +15,7 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_BOOTDELAY=5 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if part number mmc 0 vbmeta is_avb; then echo MMC with vbmeta partition detected.; echo starting Android Verified boot.; avb init 0; if avb verify; then set bootargs $bootargs $avb_bootargs; part start mmc 0 boot boot_start; part size mmc 0 boot boot_size; mmc read ${load_addr} ${boot_start} ${boot_size}; bootm ${load_addr} ${load_addr} ${fdt_addr_r}; else; echo AVB verification failed.; exit; fi; elif part number mmc 0 system is_non_avb_android; then booti ${kernel_addr_r} ${initrd_addr_r} ${fdt_addr_r};else; echo Booting FIT image.; bootm ${load_addr} ${load_addr} ${fdt_addr_r}; fi;" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_AVB_VERIFY=y diff --git a/configs/tplink_wdr4300_defconfig b/configs/tplink_wdr4300_defconfig index 6b55c93..5de4ada 100644 --- a/configs/tplink_wdr4300_defconfig +++ b/configs/tplink_wdr4300_defconfig @@ -12,6 +12,8 @@ CONFIG_SYS_LOAD_ADDR=0xa1000000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig index ec31e9a..3e386c2 100644 --- a/configs/tqma6dl_mba6_mmc_defconfig +++ b/configs/tqma6dl_mba6_mmc_defconfig @@ -12,6 +12,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig index 839d6a0..304d139 100644 --- a/configs/tqma6dl_mba6_spi_defconfig +++ b/configs/tqma6dl_mba6_spi_defconfig @@ -15,6 +15,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig index c2f6658..b4203da 100644 --- a/configs/tqma6q_mba6_mmc_defconfig +++ b/configs/tqma6q_mba6_mmc_defconfig @@ -12,6 +12,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6q-mba6x.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig index c7faa10..8d96c60 100644 --- a/configs/tqma6q_mba6_spi_defconfig +++ b/configs/tqma6q_mba6_spi_defconfig @@ -15,6 +15,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6q-mba6x.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig index 023b3df..566ecc0 100644 --- a/configs/tqma6s_mba6_mmc_defconfig +++ b/configs/tqma6s_mba6_mmc_defconfig @@ -12,6 +12,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig index 6d05d75..78b978f 100644 --- a/configs/tqma6s_mba6_spi_defconfig +++ b/configs/tqma6s_mba6_spi_defconfig @@ -15,6 +15,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index 60e7e2c..b93c9eb 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_EXYNOS=y CONFIG_SYS_TEXT_BASE=0x43e00000 CONFIG_SYS_MALLOC_LEN=0x5001000 @@ -16,7 +17,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="Please use defined boot" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run autoboot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_MISC_INIT_R=y diff --git a/configs/trats_defconfig b/configs/trats_defconfig index 63c5a4b..d55c1d7 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_EXYNOS=y CONFIG_SYS_TEXT_BASE=0x63300000 CONFIG_SYS_MALLOC_LEN=0x5001000 @@ -15,7 +16,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="Please use defined boot" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run autoboot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_MISC_INIT_R=y diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index 50b08cb..b28349d 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_NR_DRAM_BANKS=2 @@ -28,7 +29,6 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=48000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_DM=y diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index a8fa07c..6078b46 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -119,6 +119,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +CONFIG_83XX_PCICLK=0x3ef1480 CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -153,6 +154,15 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_BOOTCOUNT_MEM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xF0001001 +CONFIG_SYS_OR0_PRELIM=0xF0000E55 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8000801 +CONFIG_SYS_OR1_PRELIM=0xF8000E25 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xA0000801 +CONFIG_SYS_OR2_PRELIM=0xF0000C25 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index e6f901e..9d121b7 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -59,8 +59,6 @@ CONFIG_CMD_BTRFS=y CONFIG_CMD_FS_UUID=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ENV_SPI_MAX_HZ=y -CONFIG_ENV_SPI_MAX_HZ=40000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_AHCI_PCI=y @@ -71,7 +69,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_MV=y CONFIG_MTD=y CONFIG_DM_MTD=y -CONFIG_SF_DEFAULT_MODE=0x0 CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index fd94323..cc9bbab 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -141,6 +141,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +CONFIG_83XX_PCICLK=0x3ef1480 CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -175,6 +176,18 @@ CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_BOOTCOUNT_MEM=y +CONFIG_SYS_BR0_PRELIM_BOOL=y +CONFIG_SYS_BR0_PRELIM=0xF0001001 +CONFIG_SYS_OR0_PRELIM=0xF0000E55 +CONFIG_SYS_BR1_PRELIM_BOOL=y +CONFIG_SYS_BR1_PRELIM=0xE8000801 +CONFIG_SYS_OR1_PRELIM=0xF8000E25 +CONFIG_SYS_BR2_PRELIM_BOOL=y +CONFIG_SYS_BR2_PRELIM=0xA0000801 +CONFIG_SYS_OR2_PRELIM=0xF0000C25 +CONFIG_SYS_BR3_PRELIM_BOOL=y +CONFIG_SYS_BR3_PRELIM=0xB0000801 +CONFIG_SYS_OR3_PRELIM=0xF0000E24 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x3000 diff --git a/configs/usb_a9263_dataflash_defconfig b/configs/usb_a9263_dataflash_defconfig index f138514..5792d78 100644 --- a/configs/usb_a9263_dataflash_defconfig +++ b/configs/usb_a9263_dataflash_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock1 mtdparts=mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2) rw rootfstype=jffs2" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="nboot 21000000 0" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " @@ -32,7 +34,6 @@ CONFIG_CMD_PING=y CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2)" CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=15000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig index d70b9cf..727720c 100644 --- a/configs/usbarmory_defconfig +++ b/configs/usbarmory_defconfig @@ -15,7 +15,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx53-usbarmory" # CONFIG_CMD_BMODE is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x72000000 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run distro_bootcmd; setenv bootargs console=${console} ${bootargs_default}; ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; bootz ${kernel_addr_r} - ${fdt_addr_r}" CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y CONFIG_CMD_I2C=y diff --git a/configs/variscite_dart6ul_defconfig b/configs/variscite_dart6ul_defconfig index 53a49cc..bcca038 100644 --- a/configs/variscite_dart6ul_defconfig +++ b/configs/variscite_dart6ul_defconfig @@ -17,7 +17,7 @@ CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="run mmc_mmc_fit" CONFIG_SPL_USB_HOST=y CONFIG_SPL_WATCHDOG=y CONFIG_CMD_DM=y diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index ca23992..aa47fbc 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80110000 CONFIG_SYS_MALLOC_LEN=0x2500000 diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 4472f96..1c8857e 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_TEGRA=y CONFIG_SYS_TEXT_BASE=0x00110000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index 6312d8a..f2da12e 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -34,6 +34,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index cfc3949..ffadfc0 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -8,13 +8,13 @@ CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0xff000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DEFAULT_DEVICE_TREE="juno-r2" CONFIG_IDENT_STRING=" vexpress_aemv8a" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x90000000 CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/sda2 rw rootwait earlycon=pl011,0x7ff80000 debug user_debug=31 androidboot.hardware=juno loglevel=9" -# CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="VExpress64# " @@ -33,7 +33,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y # CONFIG_CMD_SLEEP is not set CONFIG_CMD_UBI=y -CONFIG_OF_BOARD=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xBFC0000 CONFIG_SATA_SIL=y diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 11759a0..f9abf29 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -15,7 +15,7 @@ CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0 earlycon=pl011,0x1c090000 debug user_debug=31 loglevel=9" -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTCOMMAND="if smhload ${boot_name} ${boot_addr_r}; then set bootargs; abootimg addr ${boot_addr_r}; abootimg get dtb --index=0 fdt_addr_r; bootm ${boot_addr_r} ${boot_addr_r} ${fdt_addr_r}; else; set fdt_high 0xffffffffffffffff; set initrd_high 0xffffffffffffffff; smhload ${kernel_name} ${kernel_addr}; smhload ${fdtfile} ${fdt_addr_r}; smhload ${ramdisk_name} ${ramdisk_addr_r} ramdisk_end; fdt addr ${fdt_addr_r}; fdt resize; fdt chosen ${ramdisk_addr_r} ${ramdisk_end}; booti $kernel_addr - $fdt_addr_r; fi" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="VExpress64# " diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig index 1e59d27..2daa1fc 100644 --- a/configs/vexpress_ca9x4_defconfig +++ b/configs/vexpress_ca9x4_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_TARGET_VEXPRESS_CA9X4=y CONFIG_SYS_TEXT_BASE=0x60800000 CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig index eafd5b3..2fb69c1 100644 --- a/configs/vf610twr_defconfig +++ b/configs/vf610twr_defconfig @@ -15,6 +15,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="vf610-twr" CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_LOGLEVEL=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig index 44a0028..6af2839 100644 --- a/configs/vf610twr_nand_defconfig +++ b/configs/vf610twr_nand_defconfig @@ -15,6 +15,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="vf610-twr" CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_LOGLEVEL=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig index fbc2176..52d5506 100644 --- a/configs/vinco_defconfig +++ b/configs/vinco_defconfig @@ -15,6 +15,8 @@ CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev 0 0;mmc read ${loadaddr} ${k_offset} ${k_blksize};mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};bootz ${loadaddr} - ${oftaddr}" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y @@ -34,8 +36,10 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_AT91_GPIO=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_GENERIC_ATMEL_MCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHY_SMSC=y CONFIG_ETH_DESIGNWARE=y CONFIG_MACB=y diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig index ccdaf24..097fbc5 100644 --- a/configs/vining_2000_defconfig +++ b/configs/vining_2000_defconfig @@ -27,6 +27,8 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=0 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FS_EXT4=y diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index 84d28c7..6c8c7bb 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y +CONFIG_SYS_ARCH_TIMER=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set # CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_ROCKCHIP=y diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 4015c39..2160dd8 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -74,6 +74,7 @@ CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_DM_VIDEO=y +CONFIG_VIDEO_LOGO=y # CONFIG_VIDEO_BPP8 is not set # CONFIG_VIDEO_BPP32 is not set CONFIG_SYS_WHITE_ON_BLACK=y diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig index 245a73f..8deee6d 100644 --- a/configs/warp7_bl33_defconfig +++ b/configs/warp7_bl33_defconfig @@ -13,6 +13,8 @@ CONFIG_IMX_HAB=y CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then run do_bootscript_hab;if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index 3e2ea6a..a76565e 100644 --- a/configs/warp7_defconfig +++ b/configs/warp7_defconfig @@ -17,6 +17,8 @@ CONFIG_IMX_BOOTAUX=y CONFIG_IMX_HAB=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then run do_bootscript_hab;if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" CONFIG_HUSH_PARSER=y # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y diff --git a/configs/warp_defconfig b/configs/warp_defconfig index 9cf099c..a3bc5b6 100644 --- a/configs/warp_defconfig +++ b/configs/warp_defconfig @@ -12,6 +12,8 @@ CONFIG_SYS_I2C_MXC_I2C2=y # CONFIG_CMD_BMODE is not set CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index 97327ca..8b21dc2 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -46,6 +46,7 @@ CONFIG_DOS_PARTITION=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_VERSION_VARIABLE=y +CONFIG_LPC32XX_GPIO=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_LPC32XX=y diff --git a/configs/xenguest_arm64_defconfig b/configs/xenguest_arm64_defconfig index 8d9d913..4997c25 100644 --- a/configs/xenguest_arm64_defconfig +++ b/configs/xenguest_arm64_defconfig @@ -3,9 +3,11 @@ CONFIG_POSITION_INDEPENDENT=y CONFIG_TARGET_XENGUEST_ARM64=y CONFIG_SYS_TEXT_BASE=0x40080000 CONFIG_SYS_MALLOC_LEN=0x2000000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="xenguest-arm64" CONFIG_IDENT_STRING=" xenguest" CONFIG_SYS_LOAD_ADDR=0x40000000 +CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=10 CONFIG_SYS_PROMPT="xenguest# " # CONFIG_CMD_BDI is not set @@ -33,7 +35,6 @@ CONFIG_CMD_PVBLOCK=y # CONFIG_CMD_SLEEP is not set CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y -CONFIG_OF_BOARD=y CONFIG_DM=y # CONFIG_MMC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig index 03e145f..c90899b 100644 --- a/configs/xilinx_versal_mini_defconfig +++ b/configs/xilinx_versal_mini_defconfig @@ -16,6 +16,8 @@ CONFIG_COUNTER_FREQUENCY=100000000 CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_AUTOBOOT is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig index 9c848e9..c897339 100644 --- a/configs/xilinx_versal_mini_emmc0_defconfig +++ b/configs/xilinx_versal_mini_emmc0_defconfig @@ -12,6 +12,8 @@ CONFIG_COUNTER_FREQUENCY=100000000 # CONFIG_EXPERT is not set CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_AUTOBOOT is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig index 80b14ae..90bfca7 100644 --- a/configs/xilinx_versal_mini_emmc1_defconfig +++ b/configs/xilinx_versal_mini_emmc1_defconfig @@ -12,6 +12,8 @@ CONFIG_COUNTER_FREQUENCY=100000000 # CONFIG_EXPERT is not set CONFIG_SYS_LOAD_ADDR=0x8000000 # CONFIG_AUTOBOOT is not set +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index 1159862..711439b 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x100000 CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x00001000 CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="xilinx-versal-virt" CONFIG_CMD_FRU=y CONFIG_DEFINE_TCM_OCM_MMAP=y CONFIG_COUNTER_FREQUENCY=100000000 @@ -62,7 +63,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index f343430..b19a788 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 CONFIG_SYS_MEMTEST_START=0x00000000 @@ -84,7 +85,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_MTD=y diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index d4a8517..08e90f6 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -10,6 +10,7 @@ CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-emmc0" CONFIG_SPL_SYS_MALLOC_F_LEN=0x600 CONFIG_SPL=y +CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index 67cf603..43e9ceb 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -10,6 +10,7 @@ CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-emmc1" CONFIG_SPL_SYS_MALLOC_F_LEN=0x600 CONFIG_SPL=y +CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_mini_nand_defconfig b/configs/xilinx_zynqmp_mini_nand_defconfig index 68e7586..a45203e 100644 --- a/configs/xilinx_zynqmp_mini_nand_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand" +CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig index 723c611..13a479f 100644 --- a/configs/xilinx_zynqmp_mini_nand_single_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand" +CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index 8d7c704..78c9d29 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi" CONFIG_SPL=y CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_ZYNQMP_NO_DDR=y +CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set # CONFIG_PSCI_RESET is not set # CONFIG_EXPERT is not set diff --git a/configs/xilinx_zynqmp_r5_defconfig b/configs/xilinx_zynqmp_r5_defconfig index a9c3c4a..98f46cf 100644 --- a/configs/xilinx_zynqmp_r5_defconfig +++ b/configs/xilinx_zynqmp_r5_defconfig @@ -9,6 +9,7 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-r5" CONFIG_DEBUG_UART_BASE=0xff010000 CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_CPU_FREQ_HZ=500000000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_BOOTSTAGE=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 687b41b..86223cd 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -18,6 +18,7 @@ CONFIG_ZYNQ_MAC_IN_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_CMD_FRU=y CONFIG_ZYNQMP_USB=y +CONFIG_ZYNQMP_PSU_INIT_ENABLED=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x8000000 @@ -124,7 +125,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/xtfpga_defconfig b/configs/xtfpga_defconfig index daa17d1..1c8d57b 100644 --- a/configs/xtfpga_defconfig +++ b/configs/xtfpga_defconfig @@ -5,6 +5,7 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_XTFPGA_KC705=y CONFIG_SYS_LOAD_ADDR=0x02000000 +CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=10 CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig index cab0e4f..82f3ae6 100644 --- a/configs/zynq_cse_nand_defconfig +++ b/configs/zynq_cse_nand_defconfig @@ -4,6 +4,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_ICACHE_OFF=y CONFIG_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x100000 CONFIG_SYS_MALLOC_LEN=0x8000 diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig index 5caecae..b3d1202 100644 --- a/configs/zynq_cse_nor_defconfig +++ b/configs/zynq_cse_nor_defconfig @@ -4,6 +4,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_ICACHE_OFF=y CONFIG_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0xFFFC0000 CONFIG_SYS_MALLOC_LEN=0x1000 diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig index bc5e8aa..831382f 100644 --- a/configs/zynq_cse_qspi_defconfig +++ b/configs/zynq_cse_qspi_defconfig @@ -4,6 +4,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SPL_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_ICACHE_OFF=y CONFIG_SYS_DCACHE_OFF=y +CONFIG_SYS_L2CACHE_OFF=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0xFFFC0000 CONFIG_SYS_MALLOC_LEN=0x1000 diff --git a/disk/part_dos.c b/disk/part_dos.c index 9e29aa6..94fae71 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -459,10 +459,12 @@ int layout_mbr_partitions(struct disk_partition *p, int count, ext = &p[i]; } - if (i >= 4 && !ext) { - printf("%s: extended partition is needed for more than 4 partitions\n", - __func__); - return -1; + if (count < 4) + return 0; + + if (!ext) { + log_err("extended partition is needed for more than 4 partitions\n"); + return -EINVAL; } /* calculate extended volumes start and size if needed */ diff --git a/doc/README.fsl-clk b/doc/README.fsl-clk deleted file mode 100644 index 3a9927f..0000000 --- a/doc/README.fsl-clk +++ /dev/null @@ -1,5 +0,0 @@ -Freescale system clock options - - - CONFIG_SYS_FSL_CLK - Enable to call get_clocks() in board_init_f() for - non-PPC platforms. diff --git a/doc/README.semihosting b/doc/README.semihosting index c019999..f382d01 100644 --- a/doc/README.semihosting +++ b/doc/README.semihosting @@ -25,7 +25,7 @@ or turning on CONFIG_BASE_FVP for the more full featured model. Rather than create a new armv8 board similar to armltd/vexpress64, add semihosting calls to the existing one, enabled with CONFIG_SEMIHOSTING and CONFIG_BASE_FVP both set. Also reuse the existing board config file -vexpress_aemv8a.h but differentiate the two models by the presence or +vexpress_aemv8.h but differentiate the two models by the presence or absence of CONFIG_BASE_FVP. This change is tested and works on both the Foundation and Base fastmodel simulators. diff --git a/doc/board/allwinner/index.rst b/doc/board/allwinner/index.rst new file mode 100644 index 0000000..7352ccd --- /dev/null +++ b/doc/board/allwinner/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Allwinner (sunxi) boards +======================== + +.. toctree:: + :maxdepth: 2 + + sunxi diff --git a/doc/board/allwinner/sunxi.rst b/doc/board/allwinner/sunxi.rst new file mode 100644 index 0000000..797222d --- /dev/null +++ b/doc/board/allwinner/sunxi.rst @@ -0,0 +1,319 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2021 Arm Ltd. + +Allwinner SoC based boards +========================== +For boards using an Allwinner ARM based SoC ("sunxi"), the U-Boot build +system generates a single integrated image file: ``u-boot-sunxi-with-spl.bin.`` +This file can be used on SD cards, eMMC devices, SPI flash and for the +USB-OTG based boot method (FEL). To build this file: + +* For 64-bit SoCs, build Trusted Firmware (TF-A, formerly known as ATF) first, + you will need its ``bl31.bin``. See below for more details. +* Optionally on 64-bit SoCs, build the `crust`_ management processor firmware, + you will need its ``scp.bin``. See below for more details. +* Build U-Boot:: + + $ export BL31=/path/to/bl31.bin # required for 64-bit SoCs + $ export SCP=/path/to/scp.bin # optional for some 64-bit SoCs + $ make <yourboardname>_defconfig + $ make +* Transfer to an (micro)SD card (see below for more details):: + + $ sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=8k seek=1 +* Boot and enjoy! + +.. note:: + The traditional SD card location the Allwinner BootROM loads from is 8KB + (sector 16). This works fine with the old MBR partitioning scheme, which most + SD cards come formatted with. However this is in the middle of a potential + GPT partition table, which will become invalid in this step. Newer SoCs + (starting with the H3 from late 2014) also support booting from 128KB, which + is beyond even a GPT and thus a safer location. + +For more details, and alternative boot locations or installations, see below. + +Building Arm Trusted Firmware (TF-A) +------------------------------------ +Boards using a 64-bit Soc (A64, H5, H6, H616, R329) require the BL31 stage of +the `Arm Trusted Firmware-A`_ firmware. This provides the reference +implementation of secure software for Armv8-A, offering PSCI and SMCCC +services. Allwinner support is fully mainlined. To build bl31.bin:: + + $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git + $ cd trusted-firmware-a + $ make CROSS_COMPILE=aarch64-linux-gnu- PLAT=sun50i_a64 DEBUG=1 + $ export BL31=$(pwd)/build/sun50i_a64/debug/bl31.bin + +The target platform (``PLAT=``) for A64 and H5 SoCs is sun50i_a64, for the H6 +sun50i_h6, for the H616 sun50i_h616, and for the R329 sun50i_r329. Use:: + + $ find plat/allwinner -name platform.mk + +to find all supported platforms. TF-A's `docs/plat/allwinner.rst`_ contains +more information and lists some build options. + +Building the Crust management processor firmware +------------------------------------------------ +For some SoCs and boards, the integrated OpenRISC management controller can +be used to provide power management services, foremost suspend to RAM. +There is a community supported Open Source implementation called `crust`_, +which runs on most SoCs featuring a management controller. + +This firmware part is optional, setting the SCP environment variable to +/dev/null avoids the warning message when building without one. + +To build crust's scp.bin, you need an OpenRISC (or1k) cross compiler, then:: + + $ git clone https://github.com/crust-firmware/crust.git + $ cd crust + $ make <yourboard>_defconfig + $ make CROSS_COMPILE=or1k-none-elf- scp + $ export SCP=$(pwd)/build/scp/scp.bin + +Find a list of supported board configurations in the `configs/`_ directory. +The `crust README`_ has more information about the building process, including +information about where to get OpenRISC cross compilers. + +Building the U-Boot image +------------------------- +Find the U-Boot defconfig file for your board first. Those files live in +the ``configs/`` directory; you can grep for the stub name of the devicetree +file, if you know that, or for the SoC name to find the right version:: + + $ git grep -l MACH_SUN8I_H3 configs + $ git grep -l sun50i-h6-orangepi-3 configs + +The `linux-sunxi`_ wiki also lists the name of the defconfig file in the +respective board page. Then use this defconfig file to create the .config +file, and build the image:: + + $ make <yourboard>_defconfig + $ make + +For 64-bit boards, this requires either the BL31 environment variable to be +set (as shown above in the TF-A build example), or it to be supplied on the +build command line:: + + $ make BL31=/src/tf-a.git/build/sun50i_h616/debug/bl31.bin + +The same applies to the (optional) SCP firmware. + +The file containing everything you need is called ``u-boot-sunxi-with-spl.bin``, +you will find it in the root folder of your U-Boot (build) tree. Except for +raw NAND flash devices this very same file can be used for any boot source. +It will contain the SPL image, fitted with the proper signature recognised by +the BROM, and the required checksum. Also it will contain at least U-Boot +proper, either wrapped in the legacy U-Boot image format, or in a FIT image. +The board's devicetree is also included, either appended to the U-Boot proper +image, or contained in the FIT image. If required by the SoC, this FIT file will +also include the other firmware images. + +Installing U-Boot +----------------- + +Installing on a (micro-) SD card +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +All Allwinner SoCs will try to find a boot image at sector 16 (8KB) of +an SD card, connected to the first MMC controller. To transfer the generated +image to an SD card, from any Linux device (including the board itself) with +an (micro-)SD card reader, type:: + + $ sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdX bs=1k seek=8 + +``/dev/sdx`` needs to be replaced with the block device name of the SD card +reader. On some machines this could be ``/dev/mmcblkX``. +Newer SoCs (starting from the H3 from 2014, and including all ARM64 SoCs), +also look at sector 256 (128KB) for the signature (after having checked the +8KB location). Installing the firmware there has the advantage of not +overlapping with a GPT partition table. Simply replace the "``seek=8``" above +with "``seek=128``". + +You can also use an existing (mainline) U-Boot to write to the SD card. Load +the generated U-Boot image somewhere into DRAM (via ``ext4load``, ``fatload``, +or ``tftpboot``), then write to MMC device 0:: + + => fatload mmc 0:1 $kernel_addr_r u-boot-sunxi-with-spl.bin + => mmc dev 0 + => mmc write $kernel_addr_r 0x10 0x7f0 + +To use the alternative boot location on newer SoCs:: + + => mmc write $kernel_addr_r 0x100 0x700 + +Installing on eMMC (on-board flash memory) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Some boards have a soldered eMMC chip, some other boards have an eMMC socket +to receive an optional eMMC module. U-Boot can be installed to those chips, +to boot without an SD card inserted. The Boot-ROM can boot either from the +regular user data partition, or from one of the separate eMMC boot partitions. +U-Boot can be installed either from a running Linux instance on the device, +from a running (mainline) U-Boot, or via an adapter for the (removable) +eMMC module. + +Installing on an eMMC user data partition from Linux +```````````````````````````````````````````````````` +If you have a running Linux instance on the device, and have somehow copied +over the image file to that device, you can write the image directly into the +eMMC device from there. +Find the name of the block device file first, it is one of the +``/dev/mmcblk<X>`` devices. eMMC devices typically also list a +``/dev/mmcblk<X>boot0`` partition (see below), this helps you to tell it apart +from the SD card device. +To install onto the user data partition:: + + $ sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/dev/mmcblkX bs=1k seek=8 + +Similar to SD cards, the BROM in newer SoCs (H3 and above) also checks +sector 256 of an eMMC, so you can use "``seek=128``" as well. Having a GPT +on an eMMC device is much more likely than on an SD card, so you should +probably stick to the alternative location, or use one of the boot partitions. + +Installing on an eMMC boot partition from Linux +``````````````````````````````````````````````` +In the following examples, ``/dev/mmcblkX`` needs to be replaced with the block +device name of the eMMC device. The eMMC device can be recognised by also +listing the boot partitions (``/dev/mmcblkXboot0``) in ``/proc/partitions``. + +To allow booting from one of the eMMC boot partitions, this one needs to be +enabled first. This only needs to be done once, as this setting is +persistent, even though the boot partition can be disabled or changed again +any time later:: + + # apt-get install mmc-utils + # mmc bootbus set single_hs x1 x4 /dev/mmcblkX + # mmc bootpart enable 1 1 /dev/mmcblkX + +The first "1" in the last command points to the boot partition number to be +used, typically devices offer two boot partitions. + +By default Linux disables write access to the boot partitions, to prevent +accidental overwrites. You need to disable the write protection (until the +next reboot), then can write the U-Boot image to the *first* sector of the +selected boot partition:: + + # echo 0 > /sys/block/mmcblkXboot0/force_ro + # dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblkXboot0 bs=1k + +Installing on an eMMC user data partition from U-Boot +````````````````````````````````````````````````````` +You can also write the generated image file to an SD card, boot the device +from there, and burn the very same image to the eMMC device from U-Boot. +The following commands copy the image from the SD card to the eMMC device:: + + => mmc dev 0 + => mmc read $kernel_addr_r 0x10 0x7f0 + => mmc dev 1 + => mmc write $kernel_addr_r 0x10 0x7f0 + +You can also copy an image from the 8K offset of an SD card to the 128K +offset of the eMMC (or any combination), just change the "``0x10 0x7f0``" above +to "``0x100 0x700``", respectively. Of course the image file can be loaded via +any other loading method, including ``fatload``, ``ext4load``, ``tftpboot``. + +Installing on an eMMC boot partition from U-Boot +```````````````````````````````````````````````` +The selected eMMC boot partition needs to be initially enabled first (same +as in Linux above), you can do this from U-Boot with:: + + => mmc dev 1 + => mmc bootbus 1 1 0 0 + => mmc partconf 1 1 1 1 + +The first "1" in both commands denotes the MMC device number. The second "1" +in the partconf command sets the required ``BOOT_ACK`` option, the last two "1"s +selects the active boot partition and the target for the next data access, +respectively. So for the next "``mmc write``" command to address one of the boot +partitions, the last number must either be "1" or "2", "0" would switch (back) +to the normal user data partition. + +Then load the ``u-boot-sunxi-with-spl.bin`` image file into DRAM, either by +reading directly from an SD card or eMMC user data partition, or from a +file system or TFTP (see above), and transfer it to the boot partition:: + + => tftpboot $kernel_addr_r u-boot-sunxi-with-spl.bin + => mmc write $kernel_addr_r 0 0x7f0 + +After that the device should boot from the selected boot partition, which takes +precedence over booting from the user data partition. + +Installing on SPI flash +^^^^^^^^^^^^^^^^^^^^^^^ +Some devices have a SPI NOR flash chip soldered on the board. If it is +connected to the SPI0 pins on PortC, the BROM can also boot from there. +Typically the SPI flash has the lowest boot priority, so SD card and eMMC +devices will be considered first. + +Installing on SPI flash from Linux +`````````````````````````````````` +If the devicetree enables and describes the SPI flash device, you can access +the SPI flash content from Linux, using the `MTD utils`_:: + + # apt-get install mtd-utils + # mtdinfo + # mtd_debug erase /dev/mtdX 0 0xf0000 + # mtd_debug write /dev/mtdX 0 0xf0000 u-boot-sunxi-with-spl.bin + +``/dev/mtdX`` needs to be replaced with the respective device name, as listed +in the output of ``mtdinfo``. + +Installing on SPI flash from U-Boot +``````````````````````````````````` +If SPI flash driver and command support (``CONFIG_CMD_SF``) is enabled in the +U-Boot configuration, the image file can be installed via U-Boot as well:: + + => tftpboot $kernel_addr_r u-boot-sunxi-with-spl.bin + => sf probe + => sf erase 0 +0xf0000 + => sf write $kernel_addr_r 0 $filesize + +Installing on SPI flash via USB in FEL mode +``````````````````````````````````````````` +If the device is in FEL mode (see below), the SPI flash can also be written to +with the sunxi-fel utility, via an USB(-OTG) cable from any USB host machine:: + + $ sunxi-fel spiflash-write 0 u-boot-sunxi-with-spl.bin + +Booting via the USB(-OTG) FEL mode +---------------------------------- +If none of the boot locations checked by the BROM contains a medium or valid +signature, the BROM will enter the so-called FEL mode, in which it will +listen to commands from a host on the SoC's USB-OTG interface. Those commands +allow to read from and write to arbitrary memory locations, also to start +execution at any address, which allows to bootstrap a board solely via an +USB cable. Some boards feature a "FEL" or "U-Boot" button, which forces +FEL mode despite a valid boot location being present. The same can be achieved +via a `magic binary`_ on an SD card, which allows to enter FEL mode on any +board. + +To use FEL booting, let the board enter FEL mode, via any of the mentioned +methods (no boot media, FEL button, SD card with FEL binary), then connect +a USB cable to the board's USB OTG port. Some boards (Pine64, TV boxes) don't +have a separate OTG port. In this case mostly one of the USB-A ports is +connected to USB0, and can be used via a non-standard USB-A to USB-A cable. + +Typically there is no on-board indication of FEL mode, other than a new USB +device appearing on the connected host computer. The USB vendor/device ID +is 1f3a:efe8. Mostly this will identify as "sunxi SoC OTG connector in +FEL/flashing mode", but older distributions might still report "Onda +(unverified) V972 tablet in flashing mode". + +The `sunxi_fel`_ tool implements the proprietary BROM protocol, and allows to +bootstrap U-Boot by just providing our venerable u-boot-sunxi-with-spl.bin:: + + $ sudo apt-get install sunxi-tools + $ sunxi-fel uboot u-boot-sunxi-with-spl.bin + +Additional binaries like a kernel, an initial ramdisk or a boot script, can +also be uploaded via FEL, check the Wiki's `FEL page`_ for more details. + +.. _`Arm Trusted Firmware-A`: https://www.trustedfirmware.org/projects/tf-a/ +.. _`docs/plat/allwinner.rst`: https://trustedfirmware-a.readthedocs.io/en/latest/plat/allwinner.html +.. _`crust`: https://github.com/crust-firmware/crust +.. _`configs/`: https://github.com/crust-firmware/crust/tree/master/configs +.. _`crust README`: https://github.com/crust-firmware/crust/blob/master/README.md#building-the-firmware +.. _`linux-sunxi`: https://linux-sunxi.org +.. _`MTD utils`: http://www.linux-mtd.infradead.org/ +.. _`magic binary`: https://github.com/linux-sunxi/sunxi-tools/raw/master/bin/fel-sdboot.sunxi +.. _`sunxi_fel`: https://github.com/linux-sunxi/sunxi-tools +.. _`FEL page`: https://linux-sunxi.org/FEL/USBBoot diff --git a/doc/board/armltd/index.rst b/doc/board/armltd/index.rst new file mode 100644 index 0000000..c20d8a0 --- /dev/null +++ b/doc/board/armltd/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Arm Ltd +============= + +.. toctree:: + :maxdepth: 2 + + vexpress64.rst diff --git a/doc/board/armltd/vexpress64.rst b/doc/board/armltd/vexpress64.rst new file mode 100644 index 0000000..d87b1c3 --- /dev/null +++ b/doc/board/armltd/vexpress64.rst @@ -0,0 +1,51 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Arm Versatile Express +===================== + +The vexpress_* board configuration supports the following platforms: + + * FVP_Base_RevC-2xAEMvA + * Juno development board + +Fixed Virtual Platforms +----------------------- + +The Fixed Virtual Platforms (FVP) are complete simulations of an Arm system, +including processor, memory and peripherals. They are set out in a "programmer's +view", which gives a comprehensive model on which to build and test software. + +The supported FVPs are available free of charge and can be downloaded from the +Arm developer site [1]_ (user registration might be required). + +Supported features: + + * GICv3 + * Generic timer + * PL011 UART + +The default configuration assumes that U-Boot is bootstrapped using a suitable +bootloader, such as Trusted Firmware-A [4]_. The u-boot binary can be passed +into the TF-A build: ``make PLAT=<platform> all fip BL33=u-boot.bin`` + +The FVPs can be debugged using Arm Development Studio [2]_. + +Juno +---- + +Juno is an Arm development board with the following features: + + * Arm Cortex-A72/A57 and Arm Cortex-A53 in a "big.LITTLE" configuration + * A PCIe Gen2.0 bus with 4 lanes + * 8GB of DRAM + * GICv2 + +More details can be found in the board documentation [3]_. + +References +---------- + +.. [1] https://developer.arm.com/tools-and-software/simulation-models/fixed-virtual-platforms +.. [2] https://developer.arm.com/tools-and-software/embedded/arm-development-studio +.. [3] https://developer.arm.com/tools-and-software/development-boards/juno-development-board +.. [4] https://trustedfirmware-a.readthedocs.io/
\ No newline at end of file diff --git a/doc/board/emulation/qemu-arm.rst b/doc/board/emulation/qemu-arm.rst index 7c24e29..16f6638 100644 --- a/doc/board/emulation/qemu-arm.rst +++ b/doc/board/emulation/qemu-arm.rst @@ -21,6 +21,9 @@ The 'virt' platform provides the following as the basic functionality: Additionally, a number of optional peripherals can be added to the PCI bus. +See :doc:`../../develop/devicetree/dt_qemu` for information on how to see +the devicetree actually generated by QEMU. + Building U-Boot --------------- Set the CROSS_COMPILE environment variable as usual, and run: @@ -41,14 +44,15 @@ The minimal QEMU command line to get U-Boot up and running is: - For ARM:: - qemu-system-arm -machine virt -bios u-boot.bin + qemu-system-arm -machine virt -nographic -bios u-boot.bin - For AArch64:: - qemu-system-aarch64 -machine virt -cpu cortex-a57 -bios u-boot.bin + qemu-system-aarch64 -machine virt -nographic -cpu cortex-a57 -bios u-boot.bin Note that for some odd reason qemu-system-aarch64 needs to be explicitly -told to use a 64-bit CPU or it will boot in 32-bit mode. +told to use a 64-bit CPU or it will boot in 32-bit mode. The -nographic argument +ensures that output appears on the terminal. Use Ctrl-A X to quit. Additional persistent U-boot environment support can be added as follows: diff --git a/doc/board/emulation/qemu-riscv.rst b/doc/board/emulation/qemu-riscv.rst index 4b8e104..3409fff 100644 --- a/doc/board/emulation/qemu-riscv.rst +++ b/doc/board/emulation/qemu-riscv.rst @@ -13,6 +13,9 @@ The QEMU virt machine models a generic RISC-V virtual machine with support for the VirtIO standard networking and block storage devices. It has CLINT, PLIC, 16550A UART devices in addition to VirtIO and it also uses device-tree to pass configuration information to guest software. It implements RISC-V privileged + +See :doc:`../../develop/devicetree/dt_qemu` for information on how to see +the devicetree actually generated by QEMU. architecture spec v1.10. Building U-Boot diff --git a/doc/board/index.rst b/doc/board/index.rst index 13f4db8..5607e1f 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -9,8 +9,10 @@ Board-specific doc actions/index advantech/index AndesTech/index + allwinner/index amlogic/index apple/index + armltd/index atmel/index congatec/index coreboot/index diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index 42bb941..0c5d3a9 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -645,16 +645,18 @@ On EV1 board, booting from SD card, without OP-TEE_:: dev: eMMC alt: 15 name: mmc1_rootfs layout: RAW_ADDR dev: eMMC alt: 16 name: mmc1_userfs layout: RAW_ADDR dev: MTD alt: 17 name: nor0 layout: RAW_ADDR - dev: MTD alt: 18 name: nand0 layout: RAW_ADDR - dev: VIRT alt: 19 name: OTP layout: RAW_ADDR - dev: VIRT alt: 20 name: PMIC layout: RAW_ADDR + dev: MTD alt: 18 name: nor1 layout: RAW_ADDR + dev: MTD alt: 19 name: nand0 layout: RAW_ADDR + dev: VIRT alt: 20 name: OTP layout: RAW_ADDR + dev: VIRT alt: 21 name: PMIC layout: RAW_ADDR All the supported device are exported for dfu-util tool:: $> dfu-util -l - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="PMIC", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="OTP", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nand0", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=21, name="PMIC", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="OTP", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="nand0", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nor1", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=17, name="nor0", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=16, name="mmc1_userfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="mmc1_rootfs", serial="002700333338511934383330" @@ -705,12 +707,12 @@ You can update the boot device: When the board is booting for nor0 or nand0, only the MTD partition on the boot devices are available, for example: -- NOR (nor0 = alt 20) & NAND (nand0 = alt 26) :: +- NOR (nor0 = alt 20, nor1 = alt 26) & NAND (nand0 = alt 27) : $> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1.stm32 $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32 $> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin - $> dfu-util -d 0483:5720 -a 27 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi + $> dfu-util -d 0483:5720 -a 28 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi - NAND (nand0 = alt 21):: diff --git a/doc/develop/bloblist.rst b/doc/develop/bloblist.rst index 317ebc4..47274cf 100644 --- a/doc/develop/bloblist.rst +++ b/doc/develop/bloblist.rst @@ -59,6 +59,22 @@ Bloblist provides a fairly simple API which allows blobs to be created and found. All access is via the blob's tag. Blob records are zeroed when added. +Placing the bloblist +-------------------- + +The bloblist is typically positioned at a fixed address by TPL, or SPL. This +is controlled by `CONFIG_BLOBLIST_ADDR`. But in some cases it is preferable to +allocate the bloblist in the malloc() space. Use the `CONFIG_BLOBLIST_ALLOC` +option to enable this. + +The bloblist is automatically relocated as part of U-Boot relocation. Sometimes +it is useful to expand the bloblist in U-Boot proper, since it may want to add +information for use by Linux. Note that this does not mean that Linux needs to +know anything about the bloblist format, just that it is convenient to use +bloblist to place things contiguously in memory. Set +`CONFIG_BLOBLIST_SIZE_RELOC` to define the expanded size, if needed. + + Finishing the bloblist ---------------------- diff --git a/doc/develop/devicetree/dt_qemu.rst b/doc/develop/devicetree/dt_qemu.rst new file mode 100644 index 0000000..c25c4fb --- /dev/null +++ b/doc/develop/devicetree/dt_qemu.rst @@ -0,0 +1,48 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Devicetree in QEMU +================== + +For QEMU on ARM, RISC-V and one PPC target, the devicetree is created on-the-fly +by QEMU. It is intended for use in Linux but can be used by U-Boot also, so long +as any nodes/properties needed by U-Boot are merged in. + +When `CONFIG_OF_BOARD` is enabled + + +Obtaining the QEMU devicetree +----------------------------- + +Where QEMU generates its own devicetree to pass to U-Boot tou can use +`-dtb u-boot.dtb` to force QEMU to use U-Boot's in-tree version. + +To obtain the devicetree that qemu generates, add `-machine dumpdtb=qemu.dtb`, +e.g.:: + + qemu-system-arm -machine virt -machine dumpdtb=qemu.dtb + + qemu-system-aarch64 -machine virt -machine dumpdtb=qemu.dtb + + qemu-system-riscv64 -machine virt -machine dumpdtb=qemu.dtb + + +Merging in U-Boot nodes/properties +---------------------------------- + +Various U-Boot features require nodes and properties in the U-Boot devicetree +and at present QEMU is unaware of these. To use these you must manually merge +in the appropriate pieces. + +One way to do this is with dtc. This command runs dtc on each .dtb file in turn, +to produce a text file. It drops the duplicate header on the qemu one. Then it +joins them up and runs them through dtc to compile the output:: + + qemu-system-arm -machine virt -machine dumpdtb=qemu.dtb + cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb u-boot.dtb |grep -v /dts-v1/) |dtc - -o merged.dtb + +You can then run qemu with the merged devicetree, e.g.:: + + qemu-system-arm -machine virt -nographic -bios u-boot.bin -dtb merged.dtb + +Note that there seems to be a bug in some versions of qemu where the output of +dumpdtb does not quite match what is provided to U-Boot. diff --git a/doc/develop/devicetree/index.rst b/doc/develop/devicetree/index.rst index fa5db3e..2edb695 100644 --- a/doc/develop/devicetree/index.rst +++ b/doc/develop/devicetree/index.rst @@ -11,3 +11,4 @@ build-time and runtime configuration. intro control + dt_qemu diff --git a/doc/develop/driver-model/migration.rst b/doc/develop/driver-model/migration.rst index 8bb8601..3dbeea6 100644 --- a/doc/develop/driver-model/migration.rst +++ b/doc/develop/driver-model/migration.rst @@ -98,3 +98,11 @@ Deadline: 2021.10 The I2C subsystem has supported the driver model since early 2015. Maintainers should submit patches switching over to using CONFIG_DM_I2C and other base driver model options in time for inclusion in the 2021.10 release. + +CONFIG_KEYBOARD +--------------- +Deadline: 2022.10 + +This is a legacy option which has been replaced by driver model. +Maintainers should submit patches switching over to using CONFIG_DM_KEYBOARD and +other base driver model options in time for inclusion in the 2022.10 release. diff --git a/doc/develop/environment.rst b/doc/develop/environment.rst new file mode 100644 index 0000000..0b86faf --- /dev/null +++ b/doc/develop/environment.rst @@ -0,0 +1,51 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Environment implementation +========================== + +See :doc:`../usage/environment` for usage information. + +Callback functions for environment variables +-------------------------------------------- + +For some environment variables, the behavior of u-boot needs to change +when their values are changed. This functionality allows functions to +be associated with arbitrary variables. On creation, overwrite, or +deletion, the callback will provide the opportunity for some side +effect to happen or for the change to be rejected. + +The callbacks are named and associated with a function using the +U_BOOT_ENV_CALLBACK macro in your board or driver code. + +These callbacks are associated with variables in one of two ways. The +static list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC +in the board configuration to a string that defines a list of +associations. The list must be in the following format:: + + entry = variable_name[:callback_name] + list = entry[,list] + +If the callback name is not specified, then the callback is deleted. +Spaces are also allowed anywhere in the list. + +Callbacks can also be associated by defining the ".callbacks" variable +with the same list format above. Any association in ".callbacks" will +override any association in the static list. You can define +CONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the +".callbacks" environment variable in the default or embedded environment. + +If CONFIG_REGEX is defined, the variable_name above is evaluated as a +regular expression. This allows multiple variables to be connected to +the same callback without explicitly listing them all out. + +The signature of the callback functions is:: + + int callback(const char *name, const char *value, enum env_op op, int flags) + +* name - changed environment variable +* value - new value of the environment variable +* op - operation (create, overwrite, or delete) +* flags - attributes of the environment variable change, see flags H_* in + include/search.h + +The return value is 0 if the variable change is accepted and 1 otherwise. diff --git a/doc/develop/index.rst b/doc/develop/index.rst index b3871b1..9592d19 100644 --- a/doc/develop/index.rst +++ b/doc/develop/index.rst @@ -16,6 +16,7 @@ Implementation devicetree/index distro driver-model/index + environment global_data logging makefiles diff --git a/doc/develop/trace.rst b/doc/develop/trace.rst index 09f5745..b22e068 100644 --- a/doc/develop/trace.rst +++ b/doc/develop/trace.rst @@ -30,16 +30,11 @@ Sandbox is a build of U-Boot that can run under Linux so it is a convenient way of trying out tracing before you use it on your actual board. To do this, follow these steps: -Add the following to include/configs/sandbox.h (if not already there) +Add the following to config/sandbox_defconfig .. code-block:: c - #define CONFIG_TRACE - #define CONFIG_CMD_TRACE - #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) - #define CONFIG_TRACE_EARLY_SIZE (8 << 20) - #define CONFIG_TRACE_EARLY - #define CONFIG_TRACE_EARLY_ADDR 0x00100000 + CONFIG_TRACE=y Build sandbox U-Boot with tracing enabled: diff --git a/doc/develop/uefi/u-boot_on_efi.rst b/doc/develop/uefi/u-boot_on_efi.rst index 5f2f850..acad639 100644 --- a/doc/develop/uefi/u-boot_on_efi.rst +++ b/doc/develop/uefi/u-boot_on_efi.rst @@ -265,13 +265,11 @@ This work could be extended in a number of ways: - Figure out how to solve the interrupt problem -- Add more drivers to the application side (e.g. block devices, USB, - environment access). This would mostly be an academic exercise as a strong - use case is not readily apparent, but it might be fun. +- Add more drivers to the application side (e.g.USB, environment access). - Avoid turning off boot services in the stub. Instead allow U-Boot to make use of boot services in case it wants to. It is unclear what it might want - though. + though. It is better to use the app. Where is the code? ------------------ diff --git a/doc/device-tree-bindings/arm/arm,scmi.txt b/doc/device-tree-bindings/arm/arm,scmi.txt index a76124f..92572ea 100644 --- a/doc/device-tree-bindings/arm/arm,scmi.txt +++ b/doc/device-tree-bindings/arm/arm,scmi.txt @@ -14,7 +14,8 @@ Required properties: The scmi node with the following properties shall be under the /firmware/ node. -- compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports +- compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports, + or "linaro,scmi-optee" for OP-TEE transport. - mboxes: List of phandle and mailbox channel specifiers. It should contain exactly one or two mailboxes, one for transmitting messages("tx") and another optional for receiving the notifications("rx") if @@ -26,6 +27,8 @@ The scmi node with the following properties shall be under the /firmware/ node. - #size-cells : should be '0' as 'reg' property doesn't have any size associated with it. - arm,smc-id : SMC id required when using smc or hvc transports +- linaro,optee-channel-id : Channel specifier required when using OP-TEE + transport. Optional properties: @@ -33,16 +36,16 @@ Optional properties: See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details about the generic mailbox controller and client driver bindings. - -The mailbox is the only permitted method of calling the SCMI firmware. Mailbox doorbell is used as a mechanism to alert the presence of a messages and/or notification. Each protocol supported shall have a sub-node with corresponding compatible as described in the following sections. If the platform supports dedicated -communication channel for a particular protocol, the 3 properties namely: -mboxes, mbox-names and shmem shall be present in the sub-node corresponding -to that protocol. +communication channel for a particular protocol, properties shall be present +in the sub-node corresponding to that protocol. These properties are: +- mboxes, mbox-names and shmem for mailbox transport +- arm,smc-id and shmem for smc/hvc transport +- linaro,optee-channel-id and possibly shmem for OP-TEE transport Clock/Performance bindings for the clocks/OPPs based on SCMI Message Protocol ------------------------------------------------------------ diff --git a/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt b/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt index ac6a7df..926e3e8 100644 --- a/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt +++ b/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt @@ -128,23 +128,6 @@ phyc attributes: MR2 MR3 -- st,phy-cal : phy cal depending of calibration or tuning of DDR - This parameter is optional; when it is absent the built-in PHY - calibration is done. - for STM32MP15x: 12 values are requested in this order - DX0DLLCR - DX0DQTR - DX0DQSTR - DX1DLLCR - DX1DQTR - DX1DQSTR - DX2DLLCR - DX2DQTR - DX2DQSTR - DX3DLLCR - DX3DQTR - DX3DQSTR - Example: / { @@ -280,21 +263,6 @@ Example: 0x00000000 /*MR3*/ >; - st,phy-cal = < - 0x40000000 /*DX0DLLCR*/ - 0xFFFFFFFF /*DX0DQTR*/ - 0x3DB02000 /*DX0DQSTR*/ - 0x40000000 /*DX1DLLCR*/ - 0xFFFFFFFF /*DX1DQTR*/ - 0x3DB02000 /*DX1DQSTR*/ - 0x40000000 /*DX2DLLCR*/ - 0xFFFFFFFF /*DX2DQTR*/ - 0x3DB02000 /*DX2DQSTR*/ - 0x40000000 /*DX3DLLCR*/ - 0xFFFFFFFF /*DX3DQTR*/ - 0x3DB02000 /*DX3DQSTR*/ - >; - status = "okay"; }; }; diff --git a/doc/device-tree-bindings/mmc/sandbox,mmc.txt b/doc/device-tree-bindings/mmc/sandbox,mmc.txt new file mode 100644 index 0000000..1170bcd --- /dev/null +++ b/doc/device-tree-bindings/mmc/sandbox,mmc.txt @@ -0,0 +1,18 @@ +Sandbox MMC +=========== + +Required properties: +- compatible : "sandbox,mmc" + +Optional properties: +- filename : Name of backing file, if any. This is mapped into the MMC device + so can be used to provide a filesystem or other test data + + +Example +------- + +mmc2 { + compatible = "sandbox,mmc"; + non-removable; +}; diff --git a/doc/device-tree-bindings/pinctrl/apple,pinctrl.yaml b/doc/device-tree-bindings/pinctrl/apple,pinctrl.yaml new file mode 100644 index 0000000..d50571a --- /dev/null +++ b/doc/device-tree-bindings/pinctrl/apple,pinctrl.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple GPIO controller + +maintainers: + - Mark Kettenis <kettenis@openbsd.org> + +description: | + The Apple GPIO controller is a simple combined pin and GPIO + controller present on Apple ARM SoC platforms, including various + iPhone and iPad devices and the "Apple Silicon" Macs. + +properties: + compatible: + items: + - const: apple,t8103-pinctrl + - const: apple,pinctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupts: + description: One interrupt for each of the (up to 7) interrupt + groups supported by the controller sorted by interrupt group + number in ascending order. + minItems: 1 + maxItems: 7 + + interrupt-controller: true + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + pinmux: + description: + Values are constructed from pin number and alternate function + configuration number using the APPLE_PINMUX() helper macro + defined in include/dt-bindings/pinctrl/apple.h. + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/pinctrl/apple.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pinctrl: pinctrl@23c100000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3c100000 0x0 0x100000>; + clocks = <&gpio_clk>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 212>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>; + + pcie_pins: pcie-pins { + pinmux = <APPLE_PINMUX(150, 1)>, + <APPLE_PINMUX(151, 1)>, + <APPLE_PINMUX(32, 1)>; + }; + }; + }; diff --git a/doc/usage/environment.rst b/doc/usage/environment.rst new file mode 100644 index 0000000..d295cc8 --- /dev/null +++ b/doc/usage/environment.rst @@ -0,0 +1,465 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Environment Variables +===================== + +U-Boot supports user configuration using environment variables which +can be made persistent by saving to persistent storage, for example flash +memory. + +Environment variables are set using "env set" (alias "setenv"), printed using +"env print" (alias "printenv"), and saved to persistent storage using +"env save" (alias "saveenv"). Using "env set" +without a value can be used to delete a variable from the +environment. As long as you don't save the environment, you are +working with an in-memory copy. In case the Flash area containing the +environment is erased by accident, a default environment is provided. + +Some configuration is controlled by Environment Variables, so that setting the +variable can adjust the behaviour of U-Boot (e.g. autoboot delay, autoloading +from tftp). + +Text-based Environment +---------------------- + +The default environment for a board is created using a `.env` environment file +using a simple text format. The base filename for this is defined by +`CONFIG_ENV_SOURCE_FILE`, or `CONFIG_SYS_BOARD` if that is empty. + +The file must be in the board directory and have a .env extension, so +assuming that there is a board vendor, the resulting filename is therefore:: + + board/<vendor>/<board>/<CONFIG_ENV_SOURCE_FILE>.env + +or:: + + board/<vendor>/<board>/<CONFIG_SYS_BOARD>.env + +This is a plain text file where you can type your environment variables in +the form `var=value`. Blank lines and multi-line variables are supported. +The conversion script looks for a line that starts in column 1 with a string +and has an equals sign immediately afterwards. Spaces before the = are not +permitted. It is a good idea to indent your scripts so that only the 'var=' +appears at the start of a line. + +To add additional text to a variable you can use `var+=value`. This text is +merged into the variable during the make process and made available as a +single value to U-Boot. Variables can contain `+` characters but in the unlikely +event that you want to have a variable name ending in plus, put a backslash +before the `+` so that the script knows you are not adding to an existing +variable but assigning to a new one:: + + maximum\+=value + +This file can include C-style comments. Blank lines and multi-line +variables are supported, and you can use normal C preprocessor directives +and CONFIG defines from your board config also. + +For example, for snapper9260 you would create a text file called +`board/bluewater/snapper9260.env` containing the environment text. + +Example:: + + stdout=serial + #ifdef CONFIG_LCD + stdout+=,lcd + #endif + bootcmd= + /* U-Boot script for booting */ + + if [ -z ${tftpserverip} ]; then + echo "Use 'setenv tftpserverip a.b.c.d' to set IP address." + fi + + usb start; setenv autoload n; bootp; + tftpboot ${tftpserverip}: + bootm + failed= + /* Print a message when boot fails */ + echo CONFIG_SYS_BOARD boot failed - please check your image + echo Load address is CONFIG_SYS_LOAD_ADDR + +If CONFIG_ENV_SOURCE_FILE is empty and the default filename is not present, then +the old-style C environment is used instead. See below. + +Old-style C environment +----------------------- + +Traditionally, the default environment is created in `include/env_default.h`, +and can be augmented by various `CONFIG` defines. See that file for details. In +particular you can define `CONFIG_EXTRA_ENV_SETTINGS` in your board file +to add environment variables. + +Board maintainers are encouraged to migrate to the text-based environment as it +is easier to maintain. The distro-board script still requires the old-style +environment but work is underway to address this. + + +List of environment variables +----------------------------- + +Some device configuration options can be set using environment variables. In +many cases the value in the default environment comes from a CONFIG option - see +`include/env_default.h`) for this. + +This is most-likely not complete: + +baudrate + Used to set the baudrate of the UART - it defaults to CONFIG_BAUDRATE (which + defaults to 115200). + +bootdelay + Delay before automatically running bootcmd. During this time the user + can choose to enter the shell (or the boot menu if + CONFIG_AUTOBOOT_MENU_SHOW=y): + + - 0 to autoboot with no delay, but you can stop it by key input. + - -1 to disable autoboot. + - -2 to autoboot with no delay and not check for abort + + The default value is defined by CONFIG_BOOTDELAY. + The value of 'bootdelay' is overridden by the /config/bootdelay value in + the device-tree if CONFIG_OF_CONTROL=y. + Does it really make sense that the devicetree overrides the user setting? + +bootcmd + The command that is run if the user does not enter the shell during the + boot delay. + +bootargs + Command line arguments passed when booting an operating system or binary + image + +bootfile + Name of the image to load with TFTP + +bootm_low + Memory range available for image processing in the bootm + command can be restricted. This variable is given as + a hexadecimal number and defines lowest address allowed + for use by the bootm command. See also "bootm_size" + environment variable. Address defined by "bootm_low" is + also the base of the initial memory mapping for the Linux + kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and + bootm_mapsize. + +bootm_mapsize + Size of the initial memory mapping for the Linux kernel. + This variable is given as a hexadecimal number and it + defines the size of the memory region starting at base + address bootm_low that is accessible by the Linux kernel + during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used + as the default value if it is defined, and bootm_size is + used otherwise. + +bootm_size + Memory range available for image processing in the bootm + command can be restricted. This variable is given as + a hexadecimal number and defines the size of the region + allowed for use by the bootm command. See also "bootm_low" + environment variable. + +bootstopkeysha256, bootdelaykey, bootstopkey + See README.autoboot + +updatefile + Location of the software update file on a TFTP server, used + by the automatic software update feature. Please refer to + documentation in doc/README.update for more details. + +autoload + if set to "no" (any string beginning with 'n'), + "bootp" and "dhcp" will just load perform a lookup of the + configuration from the BOOTP server, but not try to + load any image using TFTP or DHCP. + +autostart + if set to "yes", an image loaded using the "bootp", "dhcp", + "rarpboot", "tftpboot" or "diskboot" commands will + be automatically started (by internally calling + "bootm") + + If unset, or set to "1"/"yes"/"true" (case insensitive, just the first + character is enough), a standalone image + passed to the "bootm" command will be copied to the load address + (and eventually uncompressed), but NOT be started. + This can be used to load and uncompress arbitrary + data. + +fdt_high + if set this restricts the maximum address that the + flattened device tree will be copied into upon boot. + For example, if you have a system with 1 GB memory + at physical address 0x10000000, while Linux kernel + only recognizes the first 704 MB as low memory, you + may need to set fdt_high as 0x3C000000 to have the + device tree blob be copied to the maximum address + of the 704 MB low memory, so that Linux kernel can + access it during the boot procedure. + + If this is set to the special value 0xffffffff (32-bit machines) or + 0xffffffffffffffff (64-bit machines) then + the fdt will not be copied at all on boot. For this + to work it must reside in writable memory, have + sufficient padding on the end of it for u-boot to + add the information it needs into it, and the memory + must be accessible by the kernel. + +fdtcontroladdr + if set this is the address of the control flattened + device tree used by U-Boot when CONFIG_OF_CONTROL is + defined. + +initrd_high + restrict positioning of initrd images: + If this variable is not set, initrd images will be + copied to the highest possible address in RAM; this + is usually what you want since it allows for + maximum initrd size. If for some reason you want to + make sure that the initrd image is loaded below the + CONFIG_SYS_BOOTMAPSZ limit, you can set this environment + variable to a value of "no" or "off" or "0". + Alternatively, you can set it to a maximum upper + address to use (U-Boot will still check that it + does not overwrite the U-Boot stack and data). + + For instance, when you have a system with 16 MB + RAM, and want to reserve 4 MB from use by Linux, + you can do this by adding "mem=12M" to the value of + the "bootargs" variable. However, now you must make + sure that the initrd image is placed in the first + 12 MB as well - this can be done with:: + + setenv initrd_high 00c00000 + + If you set initrd_high to 0xffffffff (32-bit machines) or + 0xffffffffffffffff (64-bit machines), this is an + indication to U-Boot that all addresses are legal + for the Linux kernel, including addresses in flash + memory. In this case U-Boot will NOT COPY the + ramdisk at all. This may be useful to reduce the + boot time on your system, but requires that this + feature is supported by your Linux kernel. + +ipaddr + IP address; needed for tftpboot command + +loadaddr + Default load address for commands like "bootp", + "rarpboot", "tftpboot", "loadb" or "diskboot" + +loads_echo + see CONFIG_LOADS_ECHO + +serverip + TFTP server IP address; needed for tftpboot command + +bootretry + see CONFIG_BOOT_RETRY_TIME + +bootdelaykey + see CONFIG_AUTOBOOT_DELAY_STR + +bootstopkey + see CONFIG_AUTOBOOT_STOP_STR + +ethprime + controls which network interface is used first. + +ethact + controls which interface is currently active. + For example you can do the following:: + + => setenv ethact FEC + => ping 192.168.0.1 # traffic sent on FEC + => setenv ethact SCC + => ping 10.0.0.1 # traffic sent on SCC + +ethrotate + When set to "no" U-Boot does not go through all + available network interfaces. + It just stays at the currently selected interface. When unset or set to + anything other than "no", U-Boot does go through all + available network interfaces. + +netretry + When set to "no" each network operation will + either succeed or fail without retrying. + When set to "once" the network operation will + fail when all the available network interfaces + are tried once without success. + Useful on scripts which control the retry operation + themselves. + +silent_linux + If set then Linux will be told to boot silently, by + adding 'console=' to its command line. If "yes" it will be + made silent. If "no" it will not be made silent. If + unset, then it will be made silent if the U-Boot console + is silent. + +tftpsrcp + If this is set, the value is used for TFTP's + UDP source port. + +tftpdstp + If this is set, the value is used for TFTP's UDP + destination port instead of the default port 69. + +tftpblocksize + Block size to use for TFTP transfers; if not set, + we use the TFTP server's default block size + +tftptimeout + Retransmission timeout for TFTP packets (in milli- + seconds, minimum value is 1000 = 1 second). Defines + when a packet is considered to be lost so it has to + be retransmitted. The default is 5000 = 5 seconds. + Lowering this value may make downloads succeed + faster in networks with high packet loss rates or + with unreliable TFTP servers. + +tftptimeoutcountmax + maximum count of TFTP timeouts (no + unit, minimum value = 0). Defines how many timeouts + can happen during a single file transfer before that + transfer is aborted. The default is 10, and 0 means + 'no timeouts allowed'. Increasing this value may help + downloads succeed with high packet loss rates, or with + unreliable TFTP servers or client hardware. + +tftpwindowsize + if this is set, the value is used for TFTP's + window size as described by RFC 7440. + This means the count of blocks we can receive before + sending ack to server. + +vlan + When set to a value < 4095 the traffic over + Ethernet is encapsulated/received over 802.1q + VLAN tagged frames. + + Note: This appears not to be used in U-Boot. See `README.VLAN`. + +bootpretryperiod + Period during which BOOTP/DHCP sends retries. + Unsigned value, in milliseconds. If not set, the period will + be either the default (28000), or a value based on + CONFIG_NET_RETRY_COUNT, if defined. This value has + precedence over the valu based on CONFIG_NET_RETRY_COUNT. + +memmatches + Number of matches found by the last 'ms' command, in hex + +memaddr + Address of the last match found by the 'ms' command, in hex, + or 0 if none + +mempos + Index position of the last match found by the 'ms' command, + in units of the size (.b, .w, .l) of the search + +zbootbase + (x86 only) Base address of the bzImage 'setup' block + +zbootaddr + (x86 only) Address of the loaded bzImage, typically + BZIMAGE_LOAD_ADDR which is 0x100000 + + +Image locations +--------------- + +The following image location variables contain the location of images +used in booting. The "Image" column gives the role of the image and is +not an environment variable name. The other columns are environment +variable names. "File Name" gives the name of the file on a TFTP +server, "RAM Address" gives the location in RAM the image will be +loaded to, and "Flash Location" gives the image's address in NOR +flash or offset in NAND flash. + +*Note* - these variables don't have to be defined for all boards, some +boards currently use other variables for these purposes, and some +boards use these variables for other purposes. + +Also note that most of these variables are just a commonly used set of variable +names, used in some other variable definitions, but are not hard-coded anywhere +in U-Boot code. + +================= ============== ================ ============== +Image File Name RAM Address Flash Location +================= ============== ================ ============== +u-boot u-boot u-boot_addr_r u-boot_addr +Linux kernel bootfile kernel_addr_r kernel_addr +device tree blob fdtfile fdt_addr_r fdt_addr +ramdisk ramdiskfile ramdisk_addr_r ramdisk_addr +================= ============== ================ ============== + + +Automatically updated variables +------------------------------- + +The following environment variables may be used and automatically +updated by the network boot commands ("bootp" and "rarpboot"), +depending the information provided by your boot server: + +========= =================================================== +Variable Notes +========= =================================================== +bootfile see above +dnsip IP address of your Domain Name Server +dnsip2 IP address of your secondary Domain Name Server +gatewayip IP address of the Gateway (Router) to use +hostname Target hostname +ipaddr See above +netmask Subnet Mask +rootpath Pathname of the root filesystem on the NFS server +serverip see above +========= =================================================== + + +Special environment variables +----------------------------- + +There are two special Environment Variables: + +serial# + contains hardware identification information such as type string and/or + serial number +ethaddr + Ethernet address. If CONFIG_REGEX=y, also eth*addr (where * is an integer). + +These variables can be set only once (usually during manufacturing of +the board). U-Boot refuses to delete or overwrite these variables +once they have been set, unless CONFIG_ENV_OVERWRITE is enabled in the board +configuration. + +Also: + +ver + Contains the U-Boot version string as printed + with the "version" command. This variable is + readonly (see CONFIG_VERSION_VARIABLE). + +Please note that changes to some configuration parameters may take +only effect after the next boot (yes, that's just like Windows). + + +External environment file +------------------------- + +The `CONFIG_USE_DEFAULT_ENV_FILE` option provides a way to bypass the +environment generation in U-Boot. If enabled, then `CONFIG_DEFAULT_ENV_FILE` +provides the name of a file which is converted into the environment, +completely bypassing the standard environment variables in `env_default.h`. + +The format is the same as accepted by the mkenvimage tool, with lines containing +key=value pairs. Blank lines and lines beginning with # are ignored. + +Future work may unify this feature with the text-based environment, perhaps +moving the contents of `env_default.h` to a text file. + +Implementation +-------------- + +See :doc:`../develop/environment` for internal development details. diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 356f2a5..33761af 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -5,6 +5,7 @@ Use U-Boot :maxdepth: 1 dfu + environment fdt_overlays fit netconsole @@ -43,6 +44,7 @@ Shell commands qfw reset sbi + sf scp03 setexpr size diff --git a/doc/usage/sf.rst b/doc/usage/sf.rst new file mode 100644 index 0000000..71bd1be --- /dev/null +++ b/doc/usage/sf.rst @@ -0,0 +1,245 @@ +.. SPDX-License-Identifier: GPL-2.0+: + +sf command +========== + +Synopis +------- + +:: + + sf probe [[[<bus>:]<cs>] [<hz> [<mode>]]] + sf read <addr> <offset>|<partition> <len> + sf write <addr> <offset>|<partition> <len> + sf erase <offset>|<partition> <len> + sf update <addr> <offset>|<partition> <len> + sf protect lock|unlock <sector> <len> + sf test <offset>|<partition> <len> + +Description +----------- + +The *sf* command is used to access SPI flash, supporting read/write/erase and +a few other functions. + +Probe +----- + +The flash must first be probed with *sf probe* before any of the other +subcommands can be used. All of the parameters are optional: + +bus + SPI bus number containing the SPI-flash chip, e.g. 0. If you don't know + the number, you can use 'dm uclass' to see all the spi devices, + and check the value for 'seq' for each one (here 0 and 2):: + + uclass 89: spi + 0 spi@0 @ 05484960, seq 0 + 1 spi@1 @ 05484b40, seq 2 + +cs + SPI chip-select to use for the chip. This is often 0 and can be omitted, + but in some cases multiple slaves are attached to a SPI controller, + selected by a chip-select line for each one. + +hz + Speed of the SPI bus in hertz. This normally defaults to 100000, i.e. + 100KHz, which is very slow. Note that if the device exists in the + device tree, there might be a speed provided there, in which case this + setting is ignored. + +mode + SPI mode to use: + + ===== ================ + Mode Meaning + ===== ================ + 0 CPOL=0, CPHA=0 + 1 CPOL=0, CPHA=1 + 2 CPOL=1, CPHA=0 + 3 CPOL=1, CPHA=1 + ===== ================ + + Clock phase (CPHA) 0 means that data is transferred (sampled) on the + first clock edge; 1 means the second. + + Clock polarity (CPOL) controls the idle state of the clock, 0 for low, + 1 for high. + The active state is the opposite of idle. + + You may find this `SPI documentation`_ useful. + +Parameters for other subcommands (described below) are as follows: + +addr + Memory address to start transfer + +offset + Flash offset to start transfer + +partition + If the parameter is not numeric, it is assumed to be a partition + description in the format <dev_type><dev_num>,<part_num> which is not + covered here. This requires CONFIG_CMD_MTDPARTS. + +len + Number of bytes to transfer + +Read +~~~~ + +Use *sf read* to read from SPI flash to memory. The read will fail if an +attempt is made to read past the end of the flash. + + +Write +~~~~~ + +Use *sf write* to write from memory to SPI flash. The SPI flash should be +erased first, since otherwise the result is undefined. + +The write will fail if an attempt is made to read past the end of the flash. + + +Erase +~~~~~ + +Use *sf erase* to erase a region of SPI flash. The erase will fail if any part +of the region to be erased is protected or lies past the end of the flash. It +may also fail if the start offset or length are not aligned to an erase region +(e.g. 256 bytes). + + +Update +~~~~~~ + +Use *sf update* to automatically erase and update a region of SPI flash from +memory. This works a sector at a time (typical 4KB or 64KB). For each +sector it first checks if the sector already has the right data. If so it is +skipped. If not, the sector is erased and the new data written. Note that if +the length is not a multiple of the erase size, the space after the data in +the last sector will be erased. If the offset does not start at the beginning +of an erase block, the operation will fail. + +Speed statistics are shown including the number of bytes that were already +correct. + + +Protect +~~~~~~~ + +SPI-flash chips often have a protection feature where the chip is split up into +regions which can be locked or unlocked. With *sf protect* it is possible to +change these settings, if supported by the driver. + +lock|unlock + Selects whether to lock or unlock the sectors + +<sector> + Start sector number to lock/unlock. This may be the byte offset or some + other value, depending on the chip. + +<len> + Number of bytes to lock/unlock + + +Test +~~~~ + +A convenient and fast *sf test* subcommand provides a way to check that SPI +flash is working as expected. This works in four stages: + + * erase - erases the entire region + * check - checks that the region is erased + * write - writes a test pattern to the region, consisting of the U-Boot code + * read - reads back the test pattern to check that it was written correctly + +Memory is allocated for two buffers, each <len> bytes in size. At typical +size is 64KB to 1MB. The offset and size must be aligned to an erase boundary. + +Note that this test will fail if any part of the SPI flash is write-protected. + + +Examples +-------- + +This first example uses sandbox:: + + => sf probe + SF: Detected m25p16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB + => sf read 1000 1100 80000 + device 0 offset 0x1100, size 0x80000 + SF: 524288 bytes @ 0x1100 Read: OK + => md 1000 + 00001000: edfe0dd0 f33a0000 78000000 84250000 ......:....x..%. + 00001010: 28000000 11000000 10000000 00000000 ...(............ + 00001020: 6f050000 0c250000 00000000 00000000 ...o..%......... + 00001030: 00000000 00000000 00000000 00000000 ................ + 00001040: 00000000 00000000 00000000 00000000 ................ + 00001050: 00000000 00000000 00000000 00000000 ................ + 00001060: 00000000 00000000 00000000 00000000 ................ + 00001070: 00000000 00000000 01000000 00000000 ................ + 00001080: 03000000 04000000 00000000 01000000 ................ + 00001090: 03000000 04000000 0f000000 01000000 ................ + 000010a0: 03000000 08000000 1b000000 646e6173 ............sand + 000010b0: 00786f62 03000000 08000000 21000000 box............! + 000010c0: 646e6173 00786f62 01000000 61696c61 sandbox.....alia + 000010d0: 00736573 03000000 07000000 2c000000 ses............, + 000010e0: 6332692f 00003040 03000000 07000000 /i2c@0.......... + 000010f0: 31000000 6963702f 00003040 03000000 ...1/pci@0...... + => sf erase 0 80000 + SF: 524288 bytes @ 0x0 Erased: OK + => sf read 1000 1100 80000 + device 0 offset 0x1100, size 0x80000 + SF: 524288 bytes @ 0x1100 Read: OK + => md 1000 + 00001000: ffffffff ffffffff ffffffff ffffffff ................ + 00001010: ffffffff ffffffff ffffffff ffffffff ................ + 00001020: ffffffff ffffffff ffffffff ffffffff ................ + 00001030: ffffffff ffffffff ffffffff ffffffff ................ + 00001040: ffffffff ffffffff ffffffff ffffffff ................ + 00001050: ffffffff ffffffff ffffffff ffffffff ................ + 00001060: ffffffff ffffffff ffffffff ffffffff ................ + 00001070: ffffffff ffffffff ffffffff ffffffff ................ + 00001080: ffffffff ffffffff ffffffff ffffffff ................ + 00001090: ffffffff ffffffff ffffffff ffffffff ................ + 000010a0: ffffffff ffffffff ffffffff ffffffff ................ + 000010b0: ffffffff ffffffff ffffffff ffffffff ................ + 000010c0: ffffffff ffffffff ffffffff ffffffff ................ + 000010d0: ffffffff ffffffff ffffffff ffffffff ................ + 000010e0: ffffffff ffffffff ffffffff ffffffff ................ + 000010f0: ffffffff ffffffff ffffffff ffffffff ................ + +This second example is running on coral, an x86 Chromebook:: + + => sf probe + SF: Detected w25q128fw with page size 256 Bytes, erase size 4 KiB, total 16 MiB + => sf erase 300000 80000 + SF: 524288 bytes @ 0x300000 Erased: OK + => sf update 1110000 300000 80000 + device 0 offset 0x300000, size 0x80000 + 524288 bytes written, 0 bytes skipped in 0.457s, speed 1164578 B/s + + # This does nothing as the flash is already updated + => sf update 1110000 300000 80000 + device 0 offset 0x300000, size 0x80000 + 0 bytes written, 524288 bytes skipped in 0.196s, speed 2684354 B/s + => sf test 00000 80000 # try a protected region + SPI flash test: + Erase failed (err = -5) + Test failed + => sf test 800000 80000 + SPI flash test: + 0 erase: 18 ticks, 28444 KiB/s 227.552 Mbps + 1 check: 192 ticks, 2666 KiB/s 21.328 Mbps + 2 write: 227 ticks, 2255 KiB/s 18.040 Mbps + 3 read: 189 ticks, 2708 KiB/s 21.664 Mbps + Test passed + 0 erase: 18 ticks, 28444 KiB/s 227.552 Mbps + 1 check: 192 ticks, 2666 KiB/s 21.328 Mbps + 2 write: 227 ticks, 2255 KiB/s 18.040 Mbps + 3 read: 189 ticks, 2708 KiB/s 21.664 Mbps + + +.. _SPI documentation: + https://en.wikipedia.org/wiki/Serial_Peripheral_Interface diff --git a/drivers/block/ide.c b/drivers/block/ide.c index c99076c..085aa35 100644 --- a/drivers/block/ide.c +++ b/drivers/block/ide.c @@ -45,10 +45,6 @@ struct blk_desc ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE]; #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ -#ifndef CONFIG_SYS_ATA_PORT_ADDR -#define CONFIG_SYS_ATA_PORT_ADDR(port) (port) -#endif - #ifdef CONFIG_IDE_RESET extern void ide_set_reset(int idereset); @@ -678,8 +674,7 @@ static void ide_ident(struct blk_desc *dev_desc) __weak void ide_outb(int dev, int port, unsigned char val) { debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", - dev, port, val, - (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); + dev, port, val, ATA_CURR_BASE(dev) + port); #if defined(CONFIG_IDE_AHB) if (port) { @@ -690,7 +685,7 @@ __weak void ide_outb(int dev, int port, unsigned char val) outb(val, (ATA_CURR_BASE(dev))); } #else - outb(val, (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); + outb(val, ATA_CURR_BASE(dev) + port); #endif } @@ -701,12 +696,11 @@ __weak unsigned char ide_inb(int dev, int port) #if defined(CONFIG_IDE_AHB) val = ide_read_register(dev, port); #else - val = inb((ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port))); + val = inb(ATA_CURR_BASE(dev) + port); #endif debug("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", - dev, port, - (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port)), val); + dev, port, ATA_CURR_BASE(dev) + port, val); return val; } diff --git a/drivers/block/sandbox.c b/drivers/block/sandbox.c index 1c2c3b4..53925ce 100644 --- a/drivers/block/sandbox.c +++ b/drivers/block/sandbox.c @@ -19,11 +19,11 @@ DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_BLK -static struct host_block_dev host_devices[CONFIG_HOST_MAX_DEVICES]; +static struct host_block_dev host_devices[SANDBOX_HOST_MAX_DEVICES]; static struct host_block_dev *find_host_device(int dev) { - if (dev >= 0 && dev < CONFIG_HOST_MAX_DEVICES) + if (dev >= 0 && dev < SANDBOX_HOST_MAX_DEVICES) return &host_devices[dev]; return NULL; @@ -259,7 +259,7 @@ U_BOOT_DRIVER(sandbox_host_blk) = { U_BOOT_LEGACY_BLK(sandbox_host) = { .if_typename = "host", .if_type = IF_TYPE_HOST, - .max_devs = CONFIG_HOST_MAX_DEVICES, + .max_devs = SANDBOX_HOST_MAX_DEVICES, .get_dev = host_get_dev_err, }; #endif diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c index 3a92739..42ca394 100644 --- a/drivers/clk/aspeed/clk_ast2600.c +++ b/drivers/clk/aspeed/clk_ast2600.c @@ -1013,6 +1013,46 @@ static ulong ast2600_enable_usbbhclk(struct ast2600_scu *scu) return 0; } +static ulong ast2600_enable_haceclk(struct ast2600_scu *scu) +{ + uint32_t reset_bit; + uint32_t clkgate_bit; + + /* share the same reset control bit with ACRY */ + reset_bit = BIT(ASPEED_RESET_HACE); + clkgate_bit = SCU_CLKGATE1_HACE; + + /* + * we don't do reset assertion here as HACE + * shares the same reset control with ACRY + */ + writel(clkgate_bit, &scu->clkgate_clr1); + mdelay(20); + writel(reset_bit, &scu->modrst_clr1); + + return 0; +} + +static ulong ast2600_enable_rsaclk(struct ast2600_scu *scu) +{ + uint32_t reset_bit; + uint32_t clkgate_bit; + + /* same reset control bit with HACE */ + reset_bit = BIT(ASPEED_RESET_HACE); + clkgate_bit = SCU_CLKGATE1_ACRY; + + /* + * we don't do reset assertion here as HACE + * shares the same reset control with ACRY + */ + writel(clkgate_bit, &scu->clkgate_clr1); + mdelay(20); + writel(reset_bit, &scu->modrst_clr1); + + return 0; +} + static int ast2600_clk_enable(struct clk *clk) { struct ast2600_clk_priv *priv = dev_get_priv(clk->dev); @@ -1051,6 +1091,12 @@ static int ast2600_clk_enable(struct clk *clk) case ASPEED_CLK_GATE_USBPORT2CLK: ast2600_enable_usbbhclk(priv->scu); break; + case ASPEED_CLK_GATE_YCLK: + ast2600_enable_haceclk(priv->scu); + break; + case ASPEED_CLK_GATE_RSACLK: + ast2600_enable_rsaclk(priv->scu); + break; default: pr_err("can't enable clk\n"); return -ENOENT; diff --git a/drivers/clk/clk_scmi.c b/drivers/clk/clk_scmi.c index 93a4819..9a0a6f6 100644 --- a/drivers/clk/clk_scmi.c +++ b/drivers/clk/clk_scmi.c @@ -2,6 +2,9 @@ /* * Copyright (C) 2019-2020 Linaro Limited */ + +#define LOG_CATEGORY UCLASS_CLK + #include <common.h> #include <clk-uclass.h> #include <dm.h> diff --git a/drivers/clk/mpc83xx_clk.h b/drivers/clk/mpc83xx_clk.h index 8a31a4c..c06a51e 100644 --- a/drivers/clk/mpc83xx_clk.h +++ b/drivers/clk/mpc83xx_clk.h @@ -317,7 +317,7 @@ static inline u32 get_pci_sync_in(immap_t *im) u8 clkin_div; clkin_div = (get_spmr(im) & SPMR_CKID) >> SPMR_CKID_SHIFT; - return CONFIG_SYS_CLK_FREQ / (1 + clkin_div); + return get_board_sys_clk() / (1 + clkin_div); } /** @@ -331,7 +331,7 @@ static inline u32 get_csb_clk(immap_t *im) u8 spmf; spmf = (get_spmr(im) & SPMR_SPMF) >> SPMR_SPMF_SHIFT; - return CONFIG_SYS_CLK_FREQ * spmf; + return get_board_sys_clk() * spmf; } /** diff --git a/drivers/core/device-remove.c b/drivers/core/device-remove.c index 11d3959..69c50da 100644 --- a/drivers/core/device-remove.c +++ b/drivers/core/device-remove.c @@ -95,6 +95,9 @@ int device_unbind(struct udevice *dev) if (ret) return log_msg_ret("child unbind", ret); + ret = uclass_pre_unbind_device(dev); + if (ret) + return log_msg_ret("uc", ret); if (dev_get_flags(dev) & DM_FLAG_ALLOC_PDATA) { free(dev_get_plat(dev)); dev_set_plat(dev, NULL); @@ -142,10 +145,8 @@ void device_free(struct udevice *dev) } if (dev->parent) { size = dev->parent->driver->per_child_auto; - if (!size) { - size = dev->parent->uclass->uc_drv-> - per_child_auto; - } + if (!size) + size = dev->parent->uclass->uc_drv->per_child_auto; if (size) { free(dev_get_parent_priv(dev)); dev_set_parent_priv(dev, NULL); diff --git a/drivers/core/device.c b/drivers/core/device.c index efd0717..4873c47 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -533,8 +533,12 @@ int device_probe(struct udevice *dev) * is set just above. However, the PCI bus' probe() method and * associated uclass methods have not yet been called. */ - if (dev->parent && device_get_uclass_id(dev) != UCLASS_PINCTRL) - pinctrl_select_state(dev, "default"); + if (dev->parent && device_get_uclass_id(dev) != UCLASS_PINCTRL) { + ret = pinctrl_select_state(dev, "default"); + if (ret && ret != -ENOSYS) + log_debug("Device '%s' failed to configure default pinctrl: %d (%s)\n", + dev->name, ret, errno_str(ret)); + } if (CONFIG_IS_ENABLED(POWER_DOMAIN) && dev->parent && (device_get_uclass_id(dev) != UCLASS_POWER_DOMAIN) && @@ -586,8 +590,12 @@ int device_probe(struct udevice *dev) if (ret) goto fail_uclass; - if (dev->parent && device_get_uclass_id(dev) == UCLASS_PINCTRL) - pinctrl_select_state(dev, "default"); + if (dev->parent && device_get_uclass_id(dev) == UCLASS_PINCTRL) { + ret = pinctrl_select_state(dev, "default"); + if (ret && ret != -ENOSYS) + log_debug("Device '%s' failed to configure default pinctrl: %d (%s)\n", + dev->name, ret, errno_str(ret)); + } return 0; fail_uclass: @@ -731,6 +739,17 @@ int device_get_child_count(const struct udevice *parent) return count; } +int device_get_decendent_count(const struct udevice *parent) +{ + const struct udevice *dev; + int count = 1; + + list_for_each_entry(dev, &parent->child_head, sibling_node) + count += device_get_decendent_count(dev); + + return count; +} + int device_find_child_by_seq(const struct udevice *parent, int seq, struct udevice **devp) { @@ -902,15 +921,16 @@ int device_find_first_child_by_uclass(const struct udevice *parent, return -ENODEV; } -int device_find_child_by_name(const struct udevice *parent, const char *name, - struct udevice **devp) +int device_find_child_by_namelen(const struct udevice *parent, const char *name, + int len, struct udevice **devp) { struct udevice *dev; *devp = NULL; list_for_each_entry(dev, &parent->child_head, sibling_node) { - if (!strcmp(dev->name, name)) { + if (!strncmp(dev->name, name, len) && + strlen(dev->name) == len) { *devp = dev; return 0; } @@ -919,6 +939,12 @@ int device_find_child_by_name(const struct udevice *parent, const char *name, return -ENODEV; } +int device_find_child_by_name(const struct udevice *parent, const char *name, + struct udevice **devp) +{ + return device_find_child_by_namelen(parent, name, strlen(name), devp); +} + int device_first_child_err(struct udevice *parent, struct udevice **devp) { struct udevice *dev; diff --git a/drivers/core/lists.c b/drivers/core/lists.c index 5d4f2ea..d2e9dc5 100644 --- a/drivers/core/lists.c +++ b/drivers/core/lists.c @@ -58,7 +58,7 @@ static int bind_drivers_pass(struct udevice *parent, bool pre_reloc_only) const int n_ents = ll_entry_count(struct driver_info, driver_info); bool missing_parent = false; int result = 0; - uint idx; + int idx; /* * Do one iteration through the driver_info records. For of-platdata, diff --git a/drivers/core/of_access.c b/drivers/core/of_access.c index 9960e6b..3707143 100644 --- a/drivers/core/of_access.c +++ b/drivers/core/of_access.c @@ -581,7 +581,8 @@ int of_property_match_string(const struct device_node *np, const char *propname, * @propname: name of the property to be searched. * @out_strs: output array of string pointers. * @sz: number of array elements to read. - * @skip: Number of strings to skip over at beginning of list. + * @skip: Number of strings to skip over at beginning of list (cannot be + * negative) * * Don't call this function directly. It is a utility helper for the * of_property_read_string*() family of functions. diff --git a/drivers/core/of_extra.c b/drivers/core/of_extra.c index 632a1c2..59ce917 100644 --- a/drivers/core/of_extra.c +++ b/drivers/core/of_extra.c @@ -155,3 +155,15 @@ bool ofnode_phy_is_fixed_link(ofnode eth_node, ofnode *phy_node) return true; } + +bool ofnode_eth_uses_inband_aneg(ofnode eth_node) +{ + bool inband_aneg = false; + const char *managed; + + managed = ofnode_read_string(eth_node, "managed"); + if (managed && !strcmp(managed, "in-band-status")) + inband_aneg = true; + + return inband_aneg; +} diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index 08705ef..709bea2 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -456,6 +456,32 @@ int ofnode_read_string_count(ofnode node, const char *property) } } +int ofnode_read_string_list(ofnode node, const char *property, + const char ***listp) +{ + const char **prop; + int count; + int i; + + *listp = NULL; + count = ofnode_read_string_count(node, property); + if (count < 0) + return count; + if (!count) + return 0; + + prop = calloc(count + 1, sizeof(char *)); + if (!prop) + return -ENOMEM; + + for (i = 0; i < count; i++) + ofnode_read_string_index(node, property, i, &prop[i]); + prop[count] = NULL; + *listp = prop; + + return count; +} + static void ofnode_from_fdtdec_phandle_args(struct fdtdec_phandle_args *in, struct ofnode_phandle_args *out) { diff --git a/drivers/core/read.c b/drivers/core/read.c index 4307ca4..31f9e78 100644 --- a/drivers/core/read.c +++ b/drivers/core/read.c @@ -205,6 +205,12 @@ int dev_read_string_count(const struct udevice *dev, const char *propname) return ofnode_read_string_count(dev_ofnode(dev), propname); } +int dev_read_string_list(const struct udevice *dev, const char *propname, + const char ***listp) +{ + return ofnode_read_string_list(dev_ofnode(dev), propname, listp); +} + int dev_read_phandle_with_args(const struct udevice *dev, const char *list_name, const char *cells_name, int cell_count, int index, struct ofnode_phandle_args *out_args) diff --git a/drivers/core/root.c b/drivers/core/root.c index 26b8195..815173f 100644 --- a/drivers/core/root.c +++ b/drivers/core/root.c @@ -26,6 +26,7 @@ #include <dm/read.h> #include <dm/root.h> #include <dm/uclass.h> +#include <dm/uclass-internal.h> #include <dm/util.h> #include <linux/list.h> @@ -407,6 +408,12 @@ int dm_init_and_scan(bool pre_reloc_only) return 0; } +void dm_get_stats(int *device_countp, int *uclass_countp) +{ + *device_countp = device_get_decendent_count(gd->dm_root); + *uclass_countp = uclass_get_count(); +} + #ifdef CONFIG_ACPIGEN static int root_acpi_get_name(const struct udevice *dev, char *out_name) { diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index c5a5095..336ea8d 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -180,20 +180,25 @@ void uclass_set_priv(struct uclass *uc, void *priv) uc->priv_ = priv; } -enum uclass_id uclass_get_by_name(const char *name) +enum uclass_id uclass_get_by_name_len(const char *name, int len) { int i; for (i = 0; i < UCLASS_COUNT; i++) { struct uclass_driver *uc_drv = lists_uclass_lookup(i); - if (uc_drv && !strcmp(uc_drv->name, name)) + if (uc_drv && !strncmp(uc_drv->name, name, len)) return i; } return UCLASS_INVALID; } +enum uclass_id uclass_get_by_name(const char *name) +{ + return uclass_get_by_name_len(name, strlen(name)); +} + int dev_get_uclass_index(struct udevice *dev, struct uclass **ucp) { struct udevice *iter; @@ -638,6 +643,19 @@ int uclass_next_device_check(struct udevice **devp) return device_probe(*devp); } +int uclass_get_count(void) +{ + const struct uclass *uc; + int count = 0; + + if (gd->dm_root) { + list_for_each_entry(uc, gd->uclass_root, sibling_node) + count++; + } + + return count; +} + int uclass_first_device_drvdata(enum uclass_id id, ulong driver_data, struct udevice **devp) { @@ -682,7 +700,7 @@ err: } #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) -int uclass_unbind_device(struct udevice *dev) +int uclass_pre_unbind_device(struct udevice *dev) { struct uclass *uc; int ret; @@ -694,7 +712,13 @@ int uclass_unbind_device(struct udevice *dev) return ret; } + return 0; +} + +int uclass_unbind_device(struct udevice *dev) +{ list_del(&dev->uclass_node); + return 0; } #endif @@ -783,6 +807,18 @@ int uclass_probe_all(enum uclass_id id) return 0; } +int uclass_id_count(enum uclass_id id) +{ + struct udevice *dev; + struct uclass *uc; + int count = 0; + + uclass_id_foreach_dev(id, dev, uc) + count++; + + return count; +} + UCLASS_DRIVER(nop) = { .id = UCLASS_NOP, .name = "nop", diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 0082177..675081e 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -4,4 +4,6 @@ source drivers/crypto/hash/Kconfig source drivers/crypto/fsl/Kconfig +source drivers/crypto/aspeed/Kconfig + endmenu diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index e8bae43..6b76256 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_EXYNOS_ACE_SHA) += ace_sha.o obj-y += rsa_mod_exp/ obj-y += fsl/ obj-y += hash/ +obj-y += aspeed/ diff --git a/drivers/crypto/aspeed/Kconfig b/drivers/crypto/aspeed/Kconfig new file mode 100644 index 0000000..9bf3171 --- /dev/null +++ b/drivers/crypto/aspeed/Kconfig @@ -0,0 +1,20 @@ +config ASPEED_HACE + bool "ASPEED Hash and Crypto Engine" + depends on DM_HASH + help + Select this option to enable a driver for using the SHA engine in + the ASPEED BMC SoCs. + + Enabling this allows the use of SHA operations in hardware without + requiring the SHA software implementations. It also improves performance + and saves code size. + +config ASPEED_ACRY + bool "ASPEED RSA and ECC Engine" + depends on ASPEED_AST2600 + help + Select this option to enable a driver for using the RSA/ECC engine in + the ASPEED BMC SoCs. + + Enabling this allows the use of RSA/ECC operations in hardware without requiring the + software implementations. It also improves performance and saves code size. diff --git a/drivers/crypto/aspeed/Makefile b/drivers/crypto/aspeed/Makefile new file mode 100644 index 0000000..58b55fc --- /dev/null +++ b/drivers/crypto/aspeed/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ASPEED_HACE) += aspeed_hace.o +obj-$(CONFIG_ASPEED_ACRY) += aspeed_acry.o diff --git a/drivers/crypto/aspeed/aspeed_acry.c b/drivers/crypto/aspeed/aspeed_acry.c new file mode 100644 index 0000000..c28cdf3 --- /dev/null +++ b/drivers/crypto/aspeed/aspeed_acry.c @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2021 ASPEED Technology Inc. + */ +#include <config.h> +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <asm/types.h> +#include <asm/io.h> +#include <dm/device.h> +#include <dm/fdtaddr.h> +#include <linux/delay.h> +#include <u-boot/rsa-mod-exp.h> + +/* ACRY register offsets */ +#define ACRY_CTRL1 0x00 +#define ACRY_CTRL1_RSA_DMA BIT(1) +#define ACRY_CTRL1_RSA_START BIT(0) +#define ACRY_CTRL2 0x44 +#define ACRY_CTRL3 0x48 +#define ACRY_CTRL3_SRAM_AHB_ACCESS BIT(8) +#define ACRY_CTRL3_ECC_RSA_MODE_MASK GENMASK(5, 4) +#define ACRY_CTRL3_ECC_RSA_MODE_SHIFT 4 +#define ACRY_DMA_DRAM_SADDR 0x4c +#define ACRY_DMA_DMEM_TADDR 0x50 +#define ACRY_DMA_DMEM_TADDR_LEN_MASK GENMASK(15, 0) +#define ACRY_DMA_DMEM_TADDR_LEN_SHIFT 0 +#define ACRY_RSA_PARAM 0x58 +#define ACRY_RSA_PARAM_EXP_MASK GENMASK(31, 16) +#define ACRY_RSA_PARAM_EXP_SHIFT 16 +#define ACRY_RSA_PARAM_MOD_MASK GENMASK(15, 0) +#define ACRY_RSA_PARAM_MOD_SHIFT 0 +#define ACRY_RSA_INT_EN 0x3f8 +#define ACRY_RSA_INT_EN_RSA_READY BIT(2) +#define ACRY_RSA_INT_EN_RSA_CMPLT BIT(1) +#define ACRY_RSA_INT_STS 0x3fc +#define ACRY_RSA_INT_STS_RSA_READY BIT(2) +#define ACRY_RSA_INT_STS_RSA_CMPLT BIT(1) + +/* misc. constant */ +#define ACRY_ECC_MODE 2 +#define ACRY_RSA_MODE 3 +#define ACRY_CTX_BUFSZ 0x600 + +struct aspeed_acry { + phys_addr_t base; + phys_addr_t sram_base; /* internal sram */ + struct clk clk; +}; + +static int aspeed_acry_mod_exp(struct udevice *dev, const uint8_t *sig, uint32_t sig_len, + struct key_prop *prop, uint8_t *out) +{ + int i, j; + u8 *ctx; + u8 *ptr; + u32 reg; + struct aspeed_acry *acry = dev_get_priv(dev); + + ctx = memalign(16, ACRY_CTX_BUFSZ); + if (!ctx) + return -ENOMEM; + + memset(ctx, 0, ACRY_CTX_BUFSZ); + + ptr = (u8 *)prop->public_exponent; + for (i = prop->exp_len - 1, j = 0; i >= 0; --i) { + ctx[j] = ptr[i]; + j++; + j = (j % 16) ? j : j + 32; + } + + ptr = (u8 *)prop->modulus; + for (i = (prop->num_bits >> 3) - 1, j = 0; i >= 0; --i) { + ctx[j + 16] = ptr[i]; + j++; + j = (j % 16) ? j : j + 32; + } + + ptr = (u8 *)sig; + for (i = sig_len - 1, j = 0; i >= 0; --i) { + ctx[j + 32] = ptr[i]; + j++; + j = (j % 16) ? j : j + 32; + } + + writel((u32)ctx, acry->base + ACRY_DMA_DRAM_SADDR); + + reg = (((prop->exp_len << 3) << ACRY_RSA_PARAM_EXP_SHIFT) & ACRY_RSA_PARAM_EXP_MASK) | + ((prop->num_bits << ACRY_RSA_PARAM_MOD_SHIFT) & ACRY_RSA_PARAM_MOD_MASK); + writel(reg, acry->base + ACRY_RSA_PARAM); + + reg = (ACRY_CTX_BUFSZ << ACRY_DMA_DMEM_TADDR_LEN_SHIFT) & ACRY_DMA_DMEM_TADDR_LEN_MASK; + writel(reg, acry->base + ACRY_DMA_DMEM_TADDR); + + reg = (ACRY_RSA_MODE << ACRY_CTRL3_ECC_RSA_MODE_SHIFT) & ACRY_CTRL3_ECC_RSA_MODE_MASK; + writel(reg, acry->base + ACRY_CTRL3); + + writel(ACRY_CTRL1_RSA_DMA | ACRY_CTRL1_RSA_START, acry->base + ACRY_CTRL1); + + /* polling RSA status */ + while (1) { + reg = readl(acry->base + ACRY_RSA_INT_STS); + if ((reg & ACRY_RSA_INT_STS_RSA_READY) && (reg & ACRY_RSA_INT_STS_RSA_CMPLT)) { + writel(reg, ACRY_RSA_INT_STS); + break; + } + udelay(20); + } + + /* grant SRAM access permission to CPU */ + writel(0x0, acry->base + ACRY_CTRL1); + writel(ACRY_CTRL3_SRAM_AHB_ACCESS, acry->base + ACRY_CTRL3); + udelay(20); + + for (i = (prop->num_bits / 8) - 1, j = 0; i >= 0; --i) { + out[i] = readb(acry->sram_base + (j + 32)); + j++; + j = (j % 16) ? j : j + 32; + } + + /* return SRAM access permission to ACRY */ + writel(0, acry->base + ACRY_CTRL3); + + free(ctx); + + return 0; +} + +static int aspeed_acry_probe(struct udevice *dev) +{ + struct aspeed_acry *acry = dev_get_priv(dev); + int ret; + + ret = clk_get_by_index(dev, 0, &acry->clk); + if (ret < 0) { + debug("Can't get clock for %s: %d\n", dev->name, ret); + return ret; + } + + ret = clk_enable(&acry->clk); + if (ret) { + debug("Failed to enable acry clock (%d)\n", ret); + return ret; + } + + acry->base = devfdt_get_addr_index(dev, 0); + if (acry->base == FDT_ADDR_T_NONE) { + debug("Failed to get acry base\n"); + return acry->base; + } + + acry->sram_base = devfdt_get_addr_index(dev, 1); + if (acry->sram_base == FDT_ADDR_T_NONE) { + debug("Failed to get acry SRAM base\n"); + return acry->sram_base; + } + + return ret; +} + +static int aspeed_acry_remove(struct udevice *dev) +{ + struct aspeed_acry *acry = dev_get_priv(dev); + + clk_disable(&acry->clk); + + return 0; +} + +static const struct mod_exp_ops aspeed_acry_ops = { + .mod_exp = aspeed_acry_mod_exp, +}; + +static const struct udevice_id aspeed_acry_ids[] = { + { .compatible = "aspeed,ast2600-acry" }, + { } +}; + +U_BOOT_DRIVER(aspeed_acry) = { + .name = "aspeed_acry", + .id = UCLASS_MOD_EXP, + .of_match = aspeed_acry_ids, + .probe = aspeed_acry_probe, + .remove = aspeed_acry_remove, + .priv_auto = sizeof(struct aspeed_acry), + .ops = &aspeed_acry_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/crypto/aspeed/aspeed_hace.c b/drivers/crypto/aspeed/aspeed_hace.c new file mode 100644 index 0000000..1178cc6 --- /dev/null +++ b/drivers/crypto/aspeed/aspeed_hace.c @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2021 ASPEED Technology Inc. + */ +#include <config.h> +#include <common.h> +#include <dm.h> +#include <clk.h> +#include <log.h> +#include <asm/io.h> +#include <malloc.h> +#include <watchdog.h> +#include <u-boot/hash.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/iopoll.h> + +/* register offsets*/ +#define HACE_STS 0x1C +#define HACE_HASH_DATA_OVF BIT(23) +#define HACE_HASH_INT BIT(9) +#define HACE_HASH_BUSY BIT(0) +#define HACE_HASH_DATA 0x20 +#define HACE_HASH_DIGEST 0x24 +#define HACE_HASH_HMAC_KEY 0x28 +#define HACE_HASH_DATA_LEN 0x2C +#define HACE_HASH_CMD 0x30 +#define HACE_HASH_MODE_ACCUM BIT(8) +#define HACE_HASH_ALGO_SHA1 BIT(5) +#define HACE_HASH_ALGO_SHA256 (BIT(6) | BIT(4)) +#define HACE_HASH_ALGO_SHA384 (BIT(10) | BIT(6) | BIT(5)) +#define HACE_HASH_ALGO_SHA512 (BIT(6) | BIT(5)) +#define HACE_HASH_SHA_BE_EN BIT(3) + +/* buffer size based on SHA-512 need*/ +#define HASH_BLOCK_BUFSZ 128 +#define HASH_DIGEST_BUFSZ 64 + +struct aspeed_hace_ctx { + uint8_t digest[HASH_DIGEST_BUFSZ]; + + uint32_t cmd; + enum HASH_ALGO algo; + + uint32_t blk_size; + uint32_t pad_size; + uint64_t total[2]; + + uint8_t buf[HASH_BLOCK_BUFSZ]; + uint32_t buf_cnt; +} __aligned((8)); + +struct aspeed_hace { + phys_addr_t base; + struct clk clk; +}; + +static const uint32_t iv_sha1[8] = { + 0x01234567, 0x89abcdef, 0xfedcba98, 0x76543210, + 0xf0e1d2c3, 0, 0, 0 +}; + +static const uint32_t iv_sha256[8] = { + 0x67e6096a, 0x85ae67bb, 0x72f36e3c, 0x3af54fa5, + 0x7f520e51, 0x8c68059b, 0xabd9831f, 0x19cde05bUL +}; + +static const uint32_t iv_sha384[16] = { + 0x5d9dbbcb, 0xd89e05c1, 0x2a299a62, 0x07d57c36, + 0x5a015991, 0x17dd7030, 0xd8ec2f15, 0x39590ef7, + 0x67263367, 0x310bc0ff, 0x874ab48e, 0x11155868, + 0x0d2e0cdb, 0xa78ff964, 0x1d48b547, 0xa44ffabeUL +}; + +static const uint32_t iv_sha512[16] = { + 0x67e6096a, 0x08c9bcf3, 0x85ae67bb, 0x3ba7ca84, + 0x72f36e3c, 0x2bf894fe, 0x3af54fa5, 0xf1361d5f, + 0x7f520e51, 0xd182e6ad, 0x8c68059b, 0x1f6c3e2b, + 0xabd9831f, 0x6bbd41fb, 0x19cde05b, 0x79217e13UL +}; + +static int aspeed_hace_wait_completion(uint32_t reg, uint32_t flag, int timeout_us) +{ + uint32_t val; + + return readl_poll_timeout(reg, val, (val & flag) == flag, timeout_us); +} + +static int aspeed_hace_process(struct udevice *dev, void *ctx, const void *ibuf, uint32_t ilen) +{ + struct aspeed_hace *hace = dev_get_priv(dev); + struct aspeed_hace_ctx *hace_ctx = (struct aspeed_hace_ctx *)ctx; + uint32_t sts = readl(hace->base + HACE_STS); + + if (sts & HACE_HASH_BUSY) { + debug("HACE engine busy\n"); + return -EBUSY; + } + + writel(HACE_HASH_INT, hace->base + HACE_STS); + + writel((uint32_t)ibuf, hace->base + HACE_HASH_DATA); + writel((uint32_t)hace_ctx->digest, hace->base + HACE_HASH_DIGEST); + writel((uint32_t)hace_ctx->digest, hace->base + HACE_HASH_HMAC_KEY); + writel(ilen, hace->base + HACE_HASH_DATA_LEN); + writel(hace_ctx->cmd, hace->base + HACE_HASH_CMD); + + return aspeed_hace_wait_completion(hace->base + HACE_STS, + HACE_HASH_INT, + 1000 + (ilen >> 3)); +} + +static int aspeed_hace_init(struct udevice *dev, enum HASH_ALGO algo, void **ctxp) +{ + struct aspeed_hace_ctx *hace_ctx; + + hace_ctx = memalign(8, sizeof(struct aspeed_hace_ctx)); + if (!hace_ctx) + return -ENOMEM; + + memset(hace_ctx, 0, sizeof(struct aspeed_hace_ctx)); + + hace_ctx->algo = algo; + hace_ctx->cmd = HACE_HASH_MODE_ACCUM | HACE_HASH_SHA_BE_EN; + + switch (algo) { + case HASH_ALGO_SHA1: + hace_ctx->blk_size = 64; + hace_ctx->pad_size = 8; + hace_ctx->cmd |= HACE_HASH_ALGO_SHA1; + memcpy(hace_ctx->digest, iv_sha1, sizeof(iv_sha1)); + break; + case HASH_ALGO_SHA256: + hace_ctx->blk_size = 64; + hace_ctx->pad_size = 8; + hace_ctx->cmd |= HACE_HASH_ALGO_SHA256; + memcpy(hace_ctx->digest, iv_sha256, sizeof(iv_sha256)); + break; + case HASH_ALGO_SHA384: + hace_ctx->blk_size = 128; + hace_ctx->pad_size = 16; + hace_ctx->cmd |= HACE_HASH_ALGO_SHA384; + memcpy(hace_ctx->digest, iv_sha384, sizeof(iv_sha384)); + break; + case HASH_ALGO_SHA512: + hace_ctx->blk_size = 128; + hace_ctx->pad_size = 16; + hace_ctx->cmd |= HACE_HASH_ALGO_SHA512; + memcpy(hace_ctx->digest, iv_sha512, sizeof(iv_sha512)); + break; + default: + debug("Unsupported hash algorithm '%s'\n", hash_algo_name(algo)); + goto free_n_out; + }; + + *ctxp = hace_ctx; + + return 0; + +free_n_out: + free(hace_ctx); + + return -EINVAL; +} + +static int aspeed_hace_update(struct udevice *dev, void *ctx, const void *ibuf, uint32_t ilen) +{ + int rc; + uint32_t left, fill; + struct aspeed_hace_ctx *hace_ctx = ctx; + + left = hace_ctx->total[0] & (hace_ctx->blk_size - 1); + fill = hace_ctx->blk_size - left; + + hace_ctx->total[0] += ilen; + if (hace_ctx->total[0] < ilen) + hace_ctx->total[1]++; + + if (left && ilen >= fill) { + memcpy(hace_ctx->buf + left, ibuf, fill); + rc = aspeed_hace_process(dev, ctx, hace_ctx->buf, hace_ctx->blk_size); + if (rc) { + debug("failed to process hash, rc=%d\n", rc); + return rc; + } + ilen -= fill; + ibuf += fill; + left = 0; + } + + while (ilen >= hace_ctx->blk_size) { + rc = aspeed_hace_process(dev, ctx, ibuf, hace_ctx->blk_size); + if (rc) { + debug("failed to process hash, rc=%d\n", rc); + return rc; + } + + ibuf += hace_ctx->blk_size; + ilen -= hace_ctx->blk_size; + } + + if (ilen) + memcpy(hace_ctx->buf + left, ibuf, ilen); + + return 0; +} + +static int aspeed_hace_finish(struct udevice *dev, void *ctx, void *obuf) +{ + int rc = 0; + uint8_t pad[HASH_BLOCK_BUFSZ * 2]; + uint32_t last, padn; + uint64_t ibits_h, ibits_l; + uint64_t ibits_be_h, ibits_be_l; + struct aspeed_hace_ctx *hace_ctx = ctx; + + memset(pad, 0, sizeof(pad)); + pad[0] = 0x80; + + ibits_h = (hace_ctx->total[0] >> 61) | (hace_ctx->total[1] << 3); + ibits_be_h = cpu_to_be64(ibits_h); + + ibits_l = (hace_ctx->total[0] << 3); + ibits_be_l = cpu_to_be64(ibits_l); + + last = hace_ctx->total[0] & (hace_ctx->blk_size - 1); + + switch (hace_ctx->algo) { + case HASH_ALGO_SHA1: + case HASH_ALGO_SHA256: + padn = (last < 56) ? (56 - last) : (120 - last); + + rc = aspeed_hace_update(dev, ctx, pad, padn); + if (rc) { + debug("failed to append padding, rc=%d\n", rc); + goto free_n_out; + } + + rc = aspeed_hace_update(dev, ctx, &ibits_be_l, sizeof(ibits_be_l)); + if (rc) { + debug("failed to append message bits length, rc=%d\n", rc); + goto free_n_out; + } + + break; + case HASH_ALGO_SHA384: + case HASH_ALGO_SHA512: + padn = (last < 112) ? (112 - last) : (240 - last); + + rc = aspeed_hace_update(dev, ctx, pad, padn); + if (rc) { + debug("failed to append padding, rc=%d\n", rc); + goto free_n_out; + } + + rc = aspeed_hace_update(dev, ctx, &ibits_be_h, sizeof(ibits_be_h)) | + aspeed_hace_update(dev, ctx, &ibits_be_l, sizeof(ibits_be_l)); + if (rc) { + debug("failed to append message bits length, rc=%d\n", rc); + goto free_n_out; + } + + break; + default: + rc = -EINVAL; + break; + } + + memcpy(obuf, hace_ctx->digest, hash_algo_digest_size(hace_ctx->algo)); + +free_n_out: + free(ctx); + + return rc; +} + +static int aspeed_hace_digest_wd(struct udevice *dev, enum HASH_ALGO algo, + const void *ibuf, const uint32_t ilen, + void *obuf, uint32_t chunk_sz) +{ + int rc; + void *ctx; + const void *cur, *end; + uint32_t chunk; + + rc = aspeed_hace_init(dev, algo, &ctx); + if (rc) + return rc; + + if (CONFIG_IS_ENABLED(HW_WATCHDOG) || CONFIG_IS_ENABLED(WATCHDOG)) { + cur = ibuf; + end = ibuf + ilen; + + while (cur < end) { + chunk = end - cur; + if (chunk > chunk_sz) + chunk = chunk_sz; + + rc = aspeed_hace_update(dev, ctx, cur, chunk); + if (rc) + return rc; + + cur += chunk; + WATCHDOG_RESET(); + } + } else { + rc = aspeed_hace_update(dev, ctx, ibuf, ilen); + if (rc) + return rc; + } + + rc = aspeed_hace_finish(dev, ctx, obuf); + if (rc) + return rc; + + return 0; +} + +static int aspeed_hace_digest(struct udevice *dev, enum HASH_ALGO algo, + const void *ibuf, const uint32_t ilen, + void *obuf) +{ + /* re-use the watchdog version with input length as the chunk_sz */ + return aspeed_hace_digest_wd(dev, algo, ibuf, ilen, obuf, ilen); +} + +static int aspeed_hace_probe(struct udevice *dev) +{ + int rc; + struct aspeed_hace *hace = dev_get_priv(dev); + + rc = clk_get_by_index(dev, 0, &hace->clk); + if (rc < 0) { + debug("cannot get clock for %s: %d\n", dev->name, rc); + return rc; + } + + rc = clk_enable(&hace->clk); + if (rc) { + debug("cannot enable clock for %s: %d\n", dev->name, rc); + return rc; + } + + hace->base = devfdt_get_addr(dev); + + return rc; +} + +static int aspeed_hace_remove(struct udevice *dev) +{ + struct aspeed_hace *hace = dev_get_priv(dev); + + clk_disable(&hace->clk); + + return 0; +} + +static const struct hash_ops aspeed_hace_ops = { + .hash_init = aspeed_hace_init, + .hash_update = aspeed_hace_update, + .hash_finish = aspeed_hace_finish, + .hash_digest_wd = aspeed_hace_digest_wd, + .hash_digest = aspeed_hace_digest, +}; + +static const struct udevice_id aspeed_hace_ids[] = { + { .compatible = "aspeed,ast2600-hace" }, + { } +}; + +U_BOOT_DRIVER(aspeed_hace) = { + .name = "aspeed_hace", + .id = UCLASS_HASH, + .of_match = aspeed_hace_ids, + .ops = &aspeed_hace_ops, + .probe = aspeed_hace_probe, + .remove = aspeed_hace_remove, + .priv_auto = sizeof(struct aspeed_hace), + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/crypto/hash/Kconfig b/drivers/crypto/hash/Kconfig index cd29a5c..bf9540e 100644 --- a/drivers/crypto/hash/Kconfig +++ b/drivers/crypto/hash/Kconfig @@ -14,3 +14,11 @@ config HASH_SOFTWARE help Enable driver for hashing operations in software. Currently it support multiple hash algorithm including CRC/MD5/SHA. + +config HASH_ASPEED + bool "Enable Hash with ASPEED hash accelerator" + depends on DM_HASH + select ASPEED_HACE + help + Enable this to support HW-assisted hashing operations using ASPEED Hash + and Crypto engine - HACE diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig index fe3d6fc..b0e6df8 100644 --- a/drivers/ddr/fsl/Kconfig +++ b/drivers/ddr/fsl/Kconfig @@ -163,6 +163,98 @@ config ECC_INIT_VIA_DDRCONTROLLER endif +menu "PowerPC / M68K initial memory controller definitions (FLASH, SDRAM, etc)" + depends on MCF52x2 || MPC8xx || MPC83xx || MPC85xx + +config SYS_BR0_PRELIM_BOOL + bool "Define Bank 0" + +config SYS_BR0_PRELIM + hex "Preliminary value for BR0" + depends on SYS_BR0_PRELIM_BOOL + +config SYS_OR0_PRELIM + hex "Preliminary value for OR0" + depends on SYS_BR0_PRELIM_BOOL + +config SYS_BR1_PRELIM_BOOL + bool "Define Bank 1" + +config SYS_BR1_PRELIM + hex "Preliminary value for BR1" + depends on SYS_BR1_PRELIM_BOOL + +config SYS_OR1_PRELIM + hex "Preliminary value for OR1" + depends on SYS_BR1_PRELIM_BOOL + +config SYS_BR2_PRELIM_BOOL + bool "Define Bank 2" + +config SYS_BR2_PRELIM + hex "Preliminary value for BR2" + depends on SYS_BR2_PRELIM_BOOL + +config SYS_OR2_PRELIM + hex "Preliminary value for OR2" + depends on SYS_BR2_PRELIM_BOOL + +config SYS_BR3_PRELIM_BOOL + bool "Define Bank 3" + +config SYS_BR3_PRELIM + hex "Preliminary value for BR3" + depends on SYS_BR3_PRELIM_BOOL + +config SYS_OR3_PRELIM + hex "Preliminary value for OR3" + depends on SYS_BR3_PRELIM_BOOL + +config SYS_BR4_PRELIM_BOOL + bool "Define Bank 4" + +config SYS_BR4_PRELIM + hex "Preliminary value for BR4" + depends on SYS_BR4_PRELIM_BOOL + +config SYS_OR4_PRELIM + hex "Preliminary value for OR4" + depends on SYS_BR4_PRELIM_BOOL + +config SYS_BR5_PRELIM_BOOL + bool "Define Bank 5" + +config SYS_BR5_PRELIM + hex "Preliminary value for BR5" + depends on SYS_BR5_PRELIM_BOOL + +config SYS_OR5_PRELIM + hex "Preliminary value for OR5" + depends on SYS_BR5_PRELIM_BOOL + +config SYS_BR6_PRELIM_BOOL + bool "Define Bank 6" + +config SYS_BR6_PRELIM + hex "Preliminary value for BR6" + depends on SYS_BR6_PRELIM_BOOL + +config SYS_OR6_PRELIM + hex "Preliminary value for OR6" + depends on SYS_BR6_PRELIM_BOOL + +config SYS_BR7_PRELIM_BOOL + bool "Define Bank 7" + +config SYS_BR7_PRELIM + hex "Preliminary value for BR7" + depends on SYS_BR7_PRELIM_BOOL + +config SYS_OR7_PRELIM + hex "Preliminary value for OR7" + depends on SYS_BR7_PRELIM_BOOL +endmenu + config SYS_FSL_ERRATUM_A008378 bool diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h index 30daaa9..fcdef79 100644 --- a/drivers/ddr/marvell/axp/ddr3_hw_training.h +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h @@ -373,7 +373,6 @@ int ddr3_load_dqs_patterns(MV_DRAM_INFO *dram_info); void ddr3_static_training_init(void); -u8 ddr3_get_eprom_fabric(void); void ddr3_set_performance_params(MV_DRAM_INFO *dram_info); int ddr3_dram_sram_burst(u32 src, u32 dst, u32 len); void ddr3_save_training(MV_DRAM_INFO *dram_info); diff --git a/drivers/ddr/marvell/axp/ddr3_init.c b/drivers/ddr/marvell/axp/ddr3_init.c index 607f3e1..a9dcb74 100644 --- a/drivers/ddr/marvell/axp/ddr3_init.c +++ b/drivers/ddr/marvell/axp/ddr3_init.c @@ -361,12 +361,18 @@ static u32 ddr3_init_main(void) __maybe_unused u32 ddr_width = BUS_WIDTH; __maybe_unused int status; __maybe_unused u32 win_backup[16]; + __maybe_unused struct udevice *udev; + __maybe_unused int ret; /* SoC/Board special Initializtions */ fab_opt = ddr3_get_fab_opt(); #ifdef CONFIG_SPD_EEPROM - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + ret = i2c_get_chip_for_busnum(0, BUS_WIDTH_ECC_TWSI_ADDR, 1, &udev); + if (ret) { + printf("Cannot find SPD EEPROM\n"); + return MV_DDR3_TRAINING_ERR_BAD_DIMM_SETUP; + } #endif ddr3_print_version(); @@ -438,7 +444,7 @@ static u32 ddr3_init_main(void) #if defined(ECC_SUPPORT) && defined(AUTO_DETECTION_SUPPORT) ecc = 0; - if (ddr3_check_config(BUS_WIDTH_ECC_TWSI_ADDR, CONFIG_ECC)) + if (ddr3_check_config(udev, CONFIG_ECC)) ecc = 1; #endif @@ -483,7 +489,7 @@ static u32 ddr3_init_main(void) * Dynamically Set 32Bit and ECC for AXP (Relevant only for * Marvell DB boards) */ - if (ddr3_check_config(BUS_WIDTH_ECC_TWSI_ADDR, CONFIG_BUS_WIDTH)) { + if (ddr3_check_config(udev, CONFIG_BUS_WIDTH)) { ddr_width = 32; DEBUG_INIT_S("DDR3 Training Sequence - DRAM bus width 32Bit\n"); } @@ -904,7 +910,7 @@ void ddr3_static_mc_init(void) * Notes: Only Available for ArmadaXP/Armada 370 DB boards * Returns: None. */ -int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type) +int ddr3_check_config(struct udevice *udev, MV_CONFIG_TYPE config_type) { #ifdef AUTO_DETECTION_SUPPORT u8 data = 0; @@ -916,7 +922,7 @@ int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type) else offset = 0; - ret = i2c_read(twsi_addr, offset, 1, (u8 *)&data, 1); + ret = dm_i2c_read(udev, offset, &data, 1); if (!ret) { switch (config_type) { case CONFIG_ECC: @@ -943,30 +949,6 @@ int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type) return 0; } -#if defined(DB_88F78X60_REV2) -/* - * Name: ddr3_get_eprom_fabric - Get Fabric configuration from EPROM - * Desc: - * Args: twsi Address - * Notes: Only Available for ArmadaXP DB Rev2 boards - * Returns: None. - */ -u8 ddr3_get_eprom_fabric(void) -{ -#ifdef AUTO_DETECTION_SUPPORT - u8 data = 0; - int ret; - - ret = i2c_read(NEW_FABRIC_TWSI_ADDR, 1, 1, (u8 *)&data, 1); - if (!ret) - return data & 0x1F; -#endif - - return 0; -} - -#endif - /* * Name: ddr3_cl_to_valid_cl - this return register matching CL value * Desc: diff --git a/drivers/ddr/marvell/axp/ddr3_init.h b/drivers/ddr/marvell/axp/ddr3_init.h index 569a14b..a26bd2a 100644 --- a/drivers/ddr/marvell/axp/ddr3_init.h +++ b/drivers/ddr/marvell/axp/ddr3_init.h @@ -98,11 +98,10 @@ int ddr3_hw_training(u32 target_freq, u32 ddr_width, void ddr3_print_version(void); void fix_pll_val(u8 target_fab); -u8 ddr3_get_eprom_fabric(void); u32 ddr3_get_fab_opt(void); u32 ddr3_get_cpu_freq(void); u32 ddr3_get_vco_freq(void); -int ddr3_check_config(u32 addr, MV_CONFIG_TYPE config_type); +int ddr3_check_config(struct udevice *udev, MV_CONFIG_TYPE config_type); u32 ddr3_get_static_mc_value(u32 reg_addr, u32 offset1, u32 mask1, u32 offset2, u32 mask2); u32 ddr3_cl_to_valid_cl(u32 cl); diff --git a/drivers/ddr/marvell/axp/ddr3_spd.c b/drivers/ddr/marvell/axp/ddr3_spd.c index dd772e6..4763403 100644 --- a/drivers/ddr/marvell/axp/ddr3_spd.c +++ b/drivers/ddr/marvell/axp/ddr3_spd.c @@ -209,13 +209,19 @@ static u32 ddr3_get_dimm_num(u32 *dimm_addr) /* Read the dimm eeprom */ for (dimm_cur_addr = MAX_DIMM_ADDR; dimm_cur_addr > MIN_DIMM_ADDR; dimm_cur_addr--) { + struct udevice *udev; + data[SPD_DEV_TYPE_BYTE] = 0; /* Far-End DIMM must be connected */ if ((dimm_num == 0) && (dimm_cur_addr < FAR_END_DIMM_ADDR)) return 0; - ret = i2c_read(dimm_cur_addr, 0, 1, (uchar *)data, 3); + ret = i2c_get_chip_for_busnum(0, dimm_cur_addr, 1, &udev); + if (ret) + continue; + + ret = dm_i2c_read(udev, 0, data, 3); if (!ret) { if (data[SPD_DEV_TYPE_BYTE] == SPD_MEM_TYPE_DDR3) { dimm_addr[dimm_num] = dimm_cur_addr; @@ -245,9 +251,15 @@ int ddr3_spd_init(MV_DIMM_INFO *info, u32 dimm_addr, u32 dimm_width) __maybe_unused u8 vendor_high, vendor_low; if (dimm_addr != 0) { + struct udevice *udev; + memset(spd_data, 0, SPD_SIZE * sizeof(u8)); - ret = i2c_read(dimm_addr, 0, 1, (uchar *)spd_data, SPD_SIZE); + ret = i2c_get_chip_for_busnum(0, dimm_addr, 1, &udev); + if (ret) + return MV_DDR3_TRAINING_ERR_TWSI_FAIL; + + ret = dm_i2c_read(udev, 0, spd_data, SPD_SIZE); if (ret) return MV_DDR3_TRAINING_ERR_TWSI_FAIL; } diff --git a/drivers/firmware/scmi/Kconfig b/drivers/firmware/scmi/Kconfig index c3a109b..8cf85f0 100644 --- a/drivers/firmware/scmi/Kconfig +++ b/drivers/firmware/scmi/Kconfig @@ -2,7 +2,7 @@ config SCMI_FIRMWARE bool "Enable SCMI support" select FIRMWARE select OF_TRANSLATE - depends on SANDBOX || DM_MAILBOX || ARM_SMCCC + depends on SANDBOX || DM_MAILBOX || ARM_SMCCC || OPTEE help System Control and Management Interface (SCMI) is a communication protocol that defines standard interfaces for power, performance @@ -14,6 +14,30 @@ config SCMI_FIRMWARE or a companion host in the CPU system. Communications between agent (client) and the SCMI server are - based on message exchange. Messages can be exchange over tranport + based on message exchange. Messages can be exchanged over transport channels as a mailbox device or an Arm SMCCC service with some piece of identified shared memory. + +config SCMI_AGENT_MAILBOX + bool "Enable SCMI agent mailbox" + depends on SCMI_FIRMWARE && DM_MAILBOX + default y + help + Enable the SCMI communication channel based on mailbox + for compatible "arm,scmi". + +config SCMI_AGENT_SMCCC + bool "Enable SCMI agent SMCCC" + depends on SCMI_FIRMWARE && ARM_SMCCC + default y + help + Enable the SCMI communication channel based on Arm SMCCC service for + compatible "arm,scmi-smc". + +config SCMI_AGENT_OPTEE + bool "Enable SCMI agent OP-TEE" + depends on SCMI_FIRMWARE && OPTEE + default y + help + Enable the SCMI communication channel based on OP-TEE transport + for compatible "linaro,scmi-optee". diff --git a/drivers/firmware/scmi/Makefile b/drivers/firmware/scmi/Makefile index 966475e..b2ff483 100644 --- a/drivers/firmware/scmi/Makefile +++ b/drivers/firmware/scmi/Makefile @@ -1,5 +1,6 @@ obj-y += scmi_agent-uclass.o obj-y += smt.o -obj-$(CONFIG_ARM_SMCCC) += smccc_agent.o -obj-$(CONFIG_DM_MAILBOX) += mailbox_agent.o +obj-$(CONFIG_SCMI_AGENT_SMCCC) += smccc_agent.o +obj-$(CONFIG_SCMI_AGENT_MAILBOX) += mailbox_agent.o +obj-$(CONFIG_SCMI_AGENT_OPTEE) += optee_agent.o obj-$(CONFIG_SANDBOX) += sandbox-scmi_agent.o sandbox-scmi_devices.o diff --git a/drivers/firmware/scmi/mailbox_agent.c b/drivers/firmware/scmi/mailbox_agent.c index ea35e7e..8e4af0c 100644 --- a/drivers/firmware/scmi/mailbox_agent.c +++ b/drivers/firmware/scmi/mailbox_agent.c @@ -33,7 +33,7 @@ struct scmi_mbox_channel { static int scmi_mbox_process_msg(struct udevice *dev, struct scmi_msg *msg) { - struct scmi_mbox_channel *chan = dev_get_priv(dev); + struct scmi_mbox_channel *chan = dev_get_plat(dev); int ret; ret = scmi_write_msg_to_smt(dev, &chan->smt, msg); @@ -62,9 +62,9 @@ out: return ret; } -int scmi_mbox_probe(struct udevice *dev) +int scmi_mbox_of_to_plat(struct udevice *dev) { - struct scmi_mbox_channel *chan = dev_get_priv(dev); + struct scmi_mbox_channel *chan = dev_get_plat(dev); int ret; chan->timeout_us = TIMEOUT_US_10MS; @@ -72,17 +72,13 @@ int scmi_mbox_probe(struct udevice *dev) ret = mbox_get_by_index(dev, 0, &chan->mbox); if (ret) { dev_err(dev, "Failed to find mailbox: %d\n", ret); - goto out; + return ret; } ret = scmi_dt_get_smt_buffer(dev, &chan->smt); if (ret) dev_err(dev, "Failed to get shm resources: %d\n", ret); -out: - if (ret) - devm_kfree(dev, chan); - return ret; } @@ -99,7 +95,7 @@ U_BOOT_DRIVER(scmi_mbox) = { .name = "scmi-over-mailbox", .id = UCLASS_SCMI_AGENT, .of_match = scmi_mbox_ids, - .priv_auto = sizeof(struct scmi_mbox_channel), - .probe = scmi_mbox_probe, + .plat_auto = sizeof(struct scmi_mbox_channel), + .of_to_plat = scmi_mbox_of_to_plat, .ops = &scmi_mbox_ops, }; diff --git a/drivers/firmware/scmi/optee_agent.c b/drivers/firmware/scmi/optee_agent.c new file mode 100644 index 0000000..1f26592 --- /dev/null +++ b/drivers/firmware/scmi/optee_agent.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020-2021 Linaro Limited. + */ + +#define LOG_CATEGORY UCLASS_SCMI_AGENT + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <scmi_agent.h> +#include <scmi_agent-uclass.h> +#include <string.h> +#include <tee.h> +#include <asm/types.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <linux/arm-smccc.h> +#include <linux/bug.h> +#include <linux/compat.h> + +#include "smt.h" + +#define SCMI_SHM_SIZE 128 + +/** + * struct scmi_optee_channel - Description of an SCMI OP-TEE transport + * @channel_id: Channel identifier + * @smt: Shared memory buffer with synchronisation protocol + * @dyn_shm: True if using dynamically allocated shared memory + */ +struct scmi_optee_channel { + unsigned int channel_id; + struct scmi_smt smt; + bool dyn_shm; +}; + +/** + * struct channel_session - Aggreates SCMI service session context references + * @tee: OP-TEE device to invoke + * @tee_session: OP-TEE session identifier + * @tee_shm: Dynamically allocated OP-TEE shared memory, or NULL + * @channel_hdl: Channel handle provided by OP-TEE SCMI service + */ +struct channel_session { + struct udevice *tee; + u32 tee_session; + struct tee_shm *tee_shm; + u32 channel_hdl; +}; + +#define TA_SCMI_UUID { 0xa8cfe406, 0xd4f5, 0x4a2e, \ + { 0x9f, 0x8d, 0xa2, 0x5d, 0xc7, 0x54, 0xc0, 0x99 } } + +enum optee_smci_pta_cmd { + /* + * PTA_SCMI_CMD_CAPABILITIES - Get channel capabilities + * + * [out] value[0].a: Capability bit mask (enum pta_scmi_caps) + * [out] value[0].b: Extended capabilities or 0 + */ + PTA_SCMI_CMD_CAPABILITIES = 0, + + /* + * PTA_SCMI_CMD_PROCESS_SMT_CHANNEL - Process SCMI message in SMT buffer + * + * [in] value[0].a: Channel handle + * + * Shared memory used for SCMI message/response exhange is expected + * already identified and bound to channel handle in both SCMI agent + * and SCMI server (OP-TEE) parts. + * The memory uses SMT header to carry SCMI meta-data (protocol ID and + * protocol message ID). + */ + PTA_SCMI_CMD_PROCESS_SMT_CHANNEL = 1, + + /* + * PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE - Process SMT/SCMI message + * + * [in] value[0].a: Channel handle + * [in/out] memref[1]: Message/response buffer (SMT and SCMI payload) + * + * Shared memory used for SCMI message/response is a SMT buffer + * referenced by param[1]. It shall be 128 bytes large to fit response + * payload whatever message playload size. + * The memory uses SMT header to carry SCMI meta-data (protocol ID and + * protocol message ID). + */ + PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE = 2, + + /* + * PTA_SCMI_CMD_GET_CHANNEL - Get channel handle + * + * SCMI shm information are 0 if agent expects to use OP-TEE regular SHM + * + * [in] value[0].a: Channel identifier + * [out] value[0].a: Returned channel handle + * [in] value[0].b: Requested capabilities mask (enum pta_scmi_caps) + */ + PTA_SCMI_CMD_GET_CHANNEL = 3, +}; + +/* + * OP-TEE SCMI service capabilities bit flags (32bit) + * + * PTA_SCMI_CAPS_SMT_HEADER + * When set, OP-TEE supports command using SMT header protocol (SCMI shmem) in + * shared memory buffers to carry SCMI protocol synchronisation information. + */ +#define PTA_SCMI_CAPS_NONE 0 +#define PTA_SCMI_CAPS_SMT_HEADER BIT(0) + +static int open_channel(struct udevice *dev, struct channel_session *sess) +{ + const struct tee_optee_ta_uuid uuid = TA_SCMI_UUID; + struct scmi_optee_channel *chan = dev_get_plat(dev); + struct tee_open_session_arg sess_arg = { }; + struct tee_invoke_arg cmd_arg = { }; + struct tee_param param[1] = { }; + int ret; + + memset(sess, 0, sizeof(sess)); + + sess->tee = tee_find_device(NULL, NULL, NULL, NULL); + if (!sess->tee) + return -ENODEV; + + sess_arg.clnt_login = TEE_LOGIN_REE_KERNEL; + tee_optee_ta_uuid_to_octets(sess_arg.uuid, &uuid); + + ret = tee_open_session(sess->tee, &sess_arg, 0, NULL); + if (ret) { + dev_err(dev, "can't open session: %d\n", ret); + return ret; + } + + cmd_arg.func = PTA_SCMI_CMD_GET_CHANNEL; + cmd_arg.session = sess_arg.session; + + param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INOUT; + param[0].u.value.a = chan->channel_id; + param[0].u.value.b = PTA_SCMI_CAPS_SMT_HEADER; + + ret = tee_invoke_func(sess->tee, &cmd_arg, ARRAY_SIZE(param), param); + if (ret || cmd_arg.ret) { + dev_err(dev, "Invoke failed: %d, 0x%x\n", ret, cmd_arg.ret); + if (!ret) + ret = -EPROTO; + + tee_close_session(sess->tee, sess_arg.session); + return ret; + } + + sess->tee_session = sess_arg.session; + sess->channel_hdl = param[0].u.value.a; + + return 0; +} + +static void close_channel(struct channel_session *sess) +{ + tee_close_session(sess->tee, sess->tee_session); +} + +static int invoke_cmd(struct udevice *dev, struct channel_session *sess, + struct scmi_msg *msg) +{ + struct scmi_optee_channel *chan = dev_get_plat(dev); + struct tee_invoke_arg arg = { }; + struct tee_param param[2] = { }; + int ret; + + scmi_write_msg_to_smt(dev, &chan->smt, msg); + + arg.session = sess->tee_session; + param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INPUT; + param[0].u.value.a = sess->channel_hdl; + + if (chan->dyn_shm) { + arg.func = PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE; + param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INOUT; + param[1].u.memref.shm = sess->tee_shm; + param[1].u.memref.size = SCMI_SHM_SIZE; + } else { + arg.func = PTA_SCMI_CMD_PROCESS_SMT_CHANNEL; + } + + ret = tee_invoke_func(sess->tee, &arg, ARRAY_SIZE(param), param); + if (ret || arg.ret) { + if (!ret) + ret = -EPROTO; + } else { + ret = scmi_read_resp_from_smt(dev, &chan->smt, msg); + } + + scmi_clear_smt_channel(&chan->smt); + + return ret; +} + +static int prepare_shm(struct udevice *dev, struct channel_session *sess) +{ + struct scmi_optee_channel *chan = dev_get_plat(dev); + int ret; + + /* Static shm is already prepared by the firmware: nothing to do */ + if (!chan->dyn_shm) + return 0; + + chan->smt.size = SCMI_SHM_SIZE; + + ret = tee_shm_alloc(sess->tee, chan->smt.size, 0, &sess->tee_shm); + if (ret) { + dev_err(dev, "Failed to allocated shmem: %d\n", ret); + return ret; + } + + chan->smt.buf = sess->tee_shm->addr; + + /* Initialize shm buffer for message exchanges */ + scmi_clear_smt_channel(&chan->smt); + + return 0; +} + +static void release_shm(struct udevice *dev, struct channel_session *sess) +{ + struct scmi_optee_channel *chan = dev_get_plat(dev); + + if (chan->dyn_shm) + tee_shm_free(sess->tee_shm); +} + +static int scmi_optee_process_msg(struct udevice *dev, struct scmi_msg *msg) +{ + struct channel_session sess; + int ret; + + ret = open_channel(dev, &sess); + if (ret) + return ret; + + ret = prepare_shm(dev, &sess); + if (ret) + goto out; + + ret = invoke_cmd(dev, &sess, msg); + + release_shm(dev, &sess); + +out: + close_channel(&sess); + + return ret; +} + +static int scmi_optee_of_to_plat(struct udevice *dev) +{ + struct scmi_optee_channel *chan = dev_get_plat(dev); + int ret; + + if (dev_read_u32(dev, "linaro,optee-channel-id", &chan->channel_id)) { + dev_err(dev, "Missing property linaro,optee-channel-id\n"); + return -EINVAL; + } + + if (dev_read_prop(dev, "shmem", NULL)) { + ret = scmi_dt_get_smt_buffer(dev, &chan->smt); + if (ret) { + dev_err(dev, "Failed to get smt resources: %d\n", ret); + return ret; + } + chan->dyn_shm = false; + } else { + chan->dyn_shm = true; + } + + return 0; +} + +static int scmi_optee_probe(struct udevice *dev) +{ + struct channel_session sess; + int ret; + + /* Check OP-TEE service acknowledges the SCMI channel */ + ret = open_channel(dev, &sess); + if (!ret) + close_channel(&sess); + + return ret; +} + +static const struct udevice_id scmi_optee_ids[] = { + { .compatible = "linaro,scmi-optee" }, + { } +}; + +static const struct scmi_agent_ops scmi_optee_ops = { + .process_msg = scmi_optee_process_msg, +}; + +U_BOOT_DRIVER(scmi_optee) = { + .name = "scmi-over-optee", + .id = UCLASS_SCMI_AGENT, + .of_match = scmi_optee_ids, + .plat_auto = sizeof(struct scmi_optee_channel), + .of_to_plat = scmi_optee_of_to_plat, + .probe = scmi_optee_probe, + .flags = DM_FLAG_OS_PREPARE, + .ops = &scmi_optee_ops, +}; diff --git a/drivers/firmware/scmi/smccc_agent.c b/drivers/firmware/scmi/smccc_agent.c index f185891..5e166ca 100644 --- a/drivers/firmware/scmi/smccc_agent.c +++ b/drivers/firmware/scmi/smccc_agent.c @@ -32,7 +32,7 @@ struct scmi_smccc_channel { static int scmi_smccc_process_msg(struct udevice *dev, struct scmi_msg *msg) { - struct scmi_smccc_channel *chan = dev_get_priv(dev); + struct scmi_smccc_channel *chan = dev_get_plat(dev); struct arm_smccc_res res; int ret; @@ -51,9 +51,9 @@ static int scmi_smccc_process_msg(struct udevice *dev, struct scmi_msg *msg) return ret; } -static int scmi_smccc_probe(struct udevice *dev) +static int scmi_smccc_of_to_plat(struct udevice *dev) { - struct scmi_smccc_channel *chan = dev_get_priv(dev); + struct scmi_smccc_channel *chan = dev_get_plat(dev); u32 func_id; int ret; @@ -65,12 +65,10 @@ static int scmi_smccc_probe(struct udevice *dev) chan->func_id = func_id; ret = scmi_dt_get_smt_buffer(dev, &chan->smt); - if (ret) { + if (ret) dev_err(dev, "Failed to get smt resources: %d\n", ret); - return ret; - } - return 0; + return ret; } static const struct udevice_id scmi_smccc_ids[] = { @@ -86,7 +84,7 @@ U_BOOT_DRIVER(scmi_smccc) = { .name = "scmi-over-smccc", .id = UCLASS_SCMI_AGENT, .of_match = scmi_smccc_ids, - .priv_auto = sizeof(struct scmi_smccc_channel), - .probe = scmi_smccc_probe, + .plat_auto = sizeof(struct scmi_smccc_channel), + .of_to_plat = scmi_smccc_of_to_plat, .ops = &scmi_smccc_ops, }; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 40abc33..b41a755 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -177,6 +177,11 @@ config HSDK_CREG_GPIO help This driver supports CREG GPIOs on Synopsys HSDK SOC. +config KIRKWOOD_GPIO + bool "Kirkwood GPIO driver" + help + This drdiver supports GPIOs on Kirkwood platforms + config LPC32XX_GPIO bool "LPC32XX GPIO driver" depends on DM diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index eafd801..9a3c824 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -40,6 +40,10 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_M68K +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR +#endif + #if !CONFIG_IS_ENABLED(DM_I2C) static const struct fsl_i2c_base *i2c_base[4] = { (struct fsl_i2c_base *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C_OFFSET), diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index a17e55e..0b753f3 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -38,6 +38,15 @@ config TPL_DM_KEYBOARD includes methods to start/stop the device, check for available input and update LEDs if the keyboard has them. +config KEYBOARD + bool "Enable legacy keyboard support (deprecated)" + help + Enable this to enable a custom keyboard support. + This simply calls drv_keyboard_init() which must be + defined in your board-specific files. This option is deprecated + and is only used by novena. For new boards, use driver model + instead. + config CROS_EC_KEYB bool "Enable Chrome OS EC keyboard support" depends on INPUT diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 3bae072..a8baaea 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -416,7 +416,7 @@ if I2C_EEPROM config SYS_I2C_EEPROM_ADDR_OVERFLOW hex "EEPROM Address Overflow" - default 0 + default 0x0 help EEPROM chips that implement "address overflow" are ones like Catalyst 24WC04/08/16 which has 9/10/11 bits of @@ -500,4 +500,7 @@ config ESM_PMIC Support ESM (Error Signal Monitor) on PMIC devices. ESM is used typically to reboot the board in error condition. +config FSL_IFC + bool + endmenu diff --git a/drivers/misc/fsl_portals.c b/drivers/misc/fsl_portals.c index 632430e..02bc3f8 100644 --- a/drivers/misc/fsl_portals.c +++ b/drivers/misc/fsl_portals.c @@ -106,7 +106,7 @@ static int fdt_qportal(void *blob, int off, int id, char *name, enum fsl_dpaa_dev dev, int create) { int childoff, dev_off, ret = 0; - u32 dev_handle; + unsigned int dev_handle; #ifdef CONFIG_FSL_CORENET int num; u32 liodns[2]; @@ -142,11 +142,9 @@ static int fdt_qportal(void *blob, int off, int id, char *name, if (childoff > 0) { dev_handle = fdt_get_phandle(blob, dev_off); if (dev_handle <= 0) { - dev_handle = fdt_alloc_phandle(blob); - ret = fdt_set_phandle(blob, dev_off, - dev_handle); - if (ret < 0) - return ret; + dev_handle = fdt_create_phandle(blob, dev_off); + if (!dev_handle) + return -FDT_ERR_NOPHANDLES; } ret = fdt_setprop(blob, childoff, "dev-handle", diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 3ee92d0..b80e838 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -320,7 +320,7 @@ struct blk_desc *mmc_get_blk_desc(struct mmc *mmc) struct blk_desc *desc; struct udevice *dev; - device_find_first_child(mmc->dev, &dev); + device_find_first_child_by_uclass(mmc->dev, UCLASS_BLK, &dev); if (!dev) return NULL; desc = dev_get_uclass_plat(dev); @@ -425,7 +425,7 @@ int mmc_unbind(struct udevice *dev) { struct udevice *bdev; - device_find_first_child(dev, &bdev); + device_find_first_child_by_uclass(dev, UCLASS_BLK, &bdev); if (bdev) { device_remove(bdev, DM_REMOVE_NORMAL); device_unbind(bdev); diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c index 8599f09..97182ff 100644 --- a/drivers/mmc/mtk-sd.c +++ b/drivers/mmc/mtk-sd.c @@ -1724,6 +1724,20 @@ static int msdc_drv_bind(struct udevice *dev) return mmc_bind(dev, &plat->mmc, &plat->cfg); } +static int msdc_ops_wait_dat0(struct udevice *dev, int state, int timeout_us) +{ + struct msdc_host *host = dev_get_priv(dev); + int ret; + u32 reg; + + ret = readl_poll_sleep_timeout(&host->base->msdc_ps, reg, + !!(reg & MSDC_PS_DAT0) == !!state, + 1000, /* 1 ms */ + timeout_us); + + return ret; +} + static const struct dm_mmc_ops msdc_ops = { .send_cmd = msdc_ops_send_cmd, .set_ios = msdc_ops_set_ios, @@ -1732,6 +1746,7 @@ static const struct dm_mmc_ops msdc_ops = { #ifdef MMC_SUPPORTS_TUNING .execute_tuning = msdc_execute_tuning, #endif + .wait_dat0 = msdc_ops_wait_dat0, }; static const struct msdc_compatible mt7620_compat = { diff --git a/drivers/mmc/sandbox_mmc.c b/drivers/mmc/sandbox_mmc.c index 895fbff..451fe4a 100644 --- a/drivers/mmc/sandbox_mmc.c +++ b/drivers/mmc/sandbox_mmc.c @@ -9,23 +9,26 @@ #include <errno.h> #include <fdtdec.h> #include <log.h> +#include <malloc.h> #include <mmc.h> +#include <os.h> #include <asm/test.h> struct sandbox_mmc_plat { struct mmc_config cfg; struct mmc mmc; + const char *fname; }; -#define MMC_CSIZE 0 -#define MMC_CMULT 8 /* 8 because the card is high-capacity */ -#define MMC_BL_LEN_SHIFT 10 -#define MMC_BL_LEN BIT(MMC_BL_LEN_SHIFT) -#define MMC_CAPACITY (((MMC_CSIZE + 1) << (MMC_CMULT + 2)) \ - * MMC_BL_LEN) /* 1 MiB */ +#define MMC_CMULT 8 /* 8 because the card is high-capacity */ +#define MMC_BL_LEN_SHIFT 10 +#define MMC_BL_LEN BIT(MMC_BL_LEN_SHIFT) +#define SIZE_MULTIPLE ((1 << (MMC_CMULT + 2)) * MMC_BL_LEN) struct sandbox_mmc_priv { - u8 buf[MMC_CAPACITY]; + char *buf; + int csize; /* CSIZE value to report */ + int size; }; /** @@ -60,8 +63,8 @@ static int sandbox_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, case MMC_CMD_SEND_CSD: cmd->response[0] = 0; cmd->response[1] = (MMC_BL_LEN_SHIFT << 16) | - ((MMC_CSIZE >> 16) & 0x3f); - cmd->response[2] = (MMC_CSIZE & 0xffff) << 16; + ((priv->csize >> 16) & 0x3f); + cmd->response[2] = (priv->csize & 0xffff) << 16; cmd->response[3] = 0; break; case SD_CMD_SWITCH_FUNC: { @@ -143,6 +146,8 @@ static int sandbox_mmc_of_to_plat(struct udevice *dev) struct blk_desc *blk; int ret; + plat->fname = dev_read_string(dev, "filename"); + ret = mmc_of_parse(dev, cfg); if (ret) return ret; @@ -156,10 +161,46 @@ static int sandbox_mmc_of_to_plat(struct udevice *dev) static int sandbox_mmc_probe(struct udevice *dev) { struct sandbox_mmc_plat *plat = dev_get_plat(dev); + struct sandbox_mmc_priv *priv = dev_get_priv(dev); + int ret; + + if (plat->fname) { + ret = os_map_file(plat->fname, OS_O_RDWR | OS_O_CREAT, + (void **)&priv->buf, &priv->size); + if (ret) { + log_err("%s: Unable to map file '%s'\n", dev->name, + plat->fname); + return ret; + } + priv->csize = priv->size / SIZE_MULTIPLE - 1; + } else { + priv->csize = 0; + priv->size = (priv->csize + 1) * SIZE_MULTIPLE; /* 1 MiB */ + + priv->buf = malloc(priv->size); + if (!priv->buf) { + log_err("%s: Not enough memory (%x bytes)\n", + dev->name, priv->size); + return -ENOMEM; + } + } return mmc_init(&plat->mmc); } +static int sandbox_mmc_remove(struct udevice *dev) +{ + struct sandbox_mmc_plat *plat = dev_get_plat(dev); + struct sandbox_mmc_priv *priv = dev_get_priv(dev); + + if (plat->fname) + os_unmap(priv->buf, priv->size); + else + free(priv->buf); + + return 0; +} + static int sandbox_mmc_bind(struct udevice *dev) { struct sandbox_mmc_plat *plat = dev_get_plat(dev); @@ -196,6 +237,7 @@ U_BOOT_DRIVER(mmc_sandbox) = { .unbind = sandbox_mmc_unbind, .of_to_plat = sandbox_mmc_of_to_plat, .probe = sandbox_mmc_probe, + .remove = sandbox_mmc_remove, .priv_auto = sizeof(struct sandbox_mmc_priv), .plat_auto = sizeof(struct sandbox_mmc_plat), }; diff --git a/drivers/mmc/stm32_sdmmc2.c b/drivers/mmc/stm32_sdmmc2.c index a3cdf7b..44bfc91 100644 --- a/drivers/mmc/stm32_sdmmc2.c +++ b/drivers/mmc/stm32_sdmmc2.c @@ -16,6 +16,7 @@ #include <asm/bitops.h> #include <asm/cache.h> #include <dm/device_compat.h> +#include <dm/pinctrl.h> #include <linux/bitops.h> #include <linux/delay.h> #include <linux/libfdt.h> @@ -645,6 +646,66 @@ static const struct dm_mmc_ops stm32_sdmmc2_ops = { .host_power_cycle = stm32_sdmmc2_host_power_cycle, }; +static int stm32_sdmmc2_probe_level_translator(struct udevice *dev) +{ + struct stm32_sdmmc2_priv *priv = dev_get_priv(dev); + struct gpio_desc cmd_gpio; + struct gpio_desc ck_gpio; + struct gpio_desc ckin_gpio; + int clk_hi, clk_lo, ret; + + /* + * Assume the level translator is present if st,use-ckin is set. + * This is to cater for DTs which do not implement this test. + */ + priv->clk_reg_msk |= SDMMC_CLKCR_SELCLKRX_CKIN; + + ret = gpio_request_by_name(dev, "st,cmd-gpios", 0, &cmd_gpio, + GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); + if (ret) + goto exit_cmd; + + ret = gpio_request_by_name(dev, "st,ck-gpios", 0, &ck_gpio, + GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); + if (ret) + goto exit_ck; + + ret = gpio_request_by_name(dev, "st,ckin-gpios", 0, &ckin_gpio, + GPIOD_IS_IN); + if (ret) + goto exit_ckin; + + /* All GPIOs are valid, test whether level translator works */ + + /* Sample CKIN */ + clk_hi = !!dm_gpio_get_value(&ckin_gpio); + + /* Set CK low */ + dm_gpio_set_value(&ck_gpio, 0); + + /* Sample CKIN */ + clk_lo = !!dm_gpio_get_value(&ckin_gpio); + + /* Tristate all */ + dm_gpio_set_dir_flags(&cmd_gpio, GPIOD_IS_IN); + dm_gpio_set_dir_flags(&ck_gpio, GPIOD_IS_IN); + + /* Level translator is present if CK signal is propagated to CKIN */ + if (!clk_hi || clk_lo) + priv->clk_reg_msk &= ~SDMMC_CLKCR_SELCLKRX_CKIN; + + dm_gpio_free(dev, &ckin_gpio); + +exit_ckin: + dm_gpio_free(dev, &ck_gpio); +exit_ck: + dm_gpio_free(dev, &cmd_gpio); +exit_cmd: + pinctrl_select_state(dev, "default"); + + return 0; +} + static int stm32_sdmmc2_probe(struct udevice *dev) { struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); @@ -662,7 +723,7 @@ static int stm32_sdmmc2_probe(struct udevice *dev) if (dev_read_bool(dev, "st,sig-dir")) priv->pwr_reg_msk |= SDMMC_POWER_DIRPOL; if (dev_read_bool(dev, "st,use-ckin")) - priv->clk_reg_msk |= SDMMC_CLKCR_SELCLKRX_CKIN; + stm32_sdmmc2_probe_level_translator(dev); ret = clk_get_by_index(dev, 0, &priv->clk); if (ret) diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index df9eae1..0e826c1 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -9,10 +9,24 @@ config SYS_NAND_SELF_INIT This option, if enabled, provides more flexible and linux-like NAND initialization process. -config SYS_NAND_DRIVER_ECC_LAYOUT +config SPL_SYS_NAND_SELF_INIT + bool + depends on !SPL_NAND_SIMPLE + help + This option, if enabled, provides more flexible and linux-like + NAND initialization process, in SPL. + +config TPL_SYS_NAND_SELF_INIT bool + depends on TPL_NAND_SUPPORT + help + This option, if enabled, provides more flexible and linux-like + NAND initialization process, in SPL. + +config SYS_NAND_DRIVER_ECC_LAYOUT + bool "Omit standard ECC layouts to save space" help - Omit standard ECC layouts to safe space. Select this if your driver + Omit standard ECC layouts to save space. Select this if your driver is known to provide its own ECC layout. config SYS_NAND_USE_FLASH_BBT @@ -22,6 +36,7 @@ config SYS_NAND_USE_FLASH_BBT config NAND_ATMEL bool "Support Atmel NAND controller" + select SYS_NAND_SELF_INIT imply SYS_NAND_USE_FLASH_BBT help Enable this driver for NAND flash platforms using an Atmel NAND @@ -65,6 +80,7 @@ endif config NAND_BRCMNAND bool "Support Broadcom NAND controller" depends on OF_CONTROL && DM && DM_MTD + select SYS_NAND_SELF_INIT help Enable the driver for NAND flash on platforms using a Broadcom NAND controller. @@ -101,6 +117,7 @@ config NAND_BRCMNAND_63158 config NAND_DAVINCI bool "Support TI Davinci NAND controller" + select SYS_NAND_SELF_INIT if TARGET_DA850EVM help Enable this driver for NAND flash controllers available in TI Davinci and Keystone2 platforms @@ -128,17 +145,25 @@ config NAND_DENALI_DT config NAND_FSL_ELBC bool "Support Freescale Enhanced Local Bus Controller FCM NAND driver" + select TPL_SYS_NAND_SELF_INIT if TPL_NAND_SUPPORT + select SPL_SYS_NAND_SELF_INIT + select SYS_NAND_SELF_INIT depends on FSL_ELBC help Enable the Freescale Enhanced Local Bus Controller FCM NAND driver. config NAND_FSL_IFC bool "Support Freescale Integrated Flash Controller NAND driver" + select TPL_SYS_NAND_SELF_INIT if TPL_NAND_SUPPORT + select SPL_SYS_NAND_SELF_INIT + select SYS_NAND_SELF_INIT + select FSL_IFC help Enable the Freescale Integrated Flash Controller NAND driver. config NAND_LPC32XX_MLC bool "Support LPC32XX_MLC controller" + select SYS_NAND_SELF_INIT help Enable the LPC32XX MLC NAND controller. @@ -330,6 +355,7 @@ config NAND_SUNXI select SYS_NAND_SELF_INIT select SYS_NAND_U_BOOT_LOCATIONS select SPL_NAND_SUPPORT + select SPL_SYS_NAND_SELF_INIT imply CMD_NAND ---help--- Enable support for NAND. This option enables the standard and @@ -374,6 +400,7 @@ config NAND_MXC config NAND_MXS bool "MXS NAND support" depends on MX23 || MX28 || MX6 || MX7 || IMX8 || IMX8M + select SPL_SYS_NAND_SELF_INIT select SYS_NAND_SELF_INIT imply CMD_NAND select APBH_DMA @@ -406,6 +433,7 @@ config NAND_MXIC config NAND_ZYNQ bool "Support for Zynq Nand controller" + select SPL_SYS_NAND_SELF_INIT select SYS_NAND_SELF_INIT select DM_MTD imply CMD_NAND @@ -475,6 +503,14 @@ config ROCKCHIP_NAND NFC v800: RK3308, RV1108 NFC v900: PX30, RK3326 +config TEGRA_NAND + bool "Support for NAND controller on Tegra SoCs" + depends on ARCH_TEGRA + select SYS_NAND_SELF_INIT + imply CMD_NAND + help + Enables support for NAND Flash chips on Tegra SoCs platforms. + comment "Generic NAND options" config SYS_NAND_BLOCK_SIZE diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c index ef7ee39..9158d94 100644 --- a/drivers/mtd/nand/raw/davinci_nand.c +++ b/drivers/mtd/nand/raw/davinci_nand.c @@ -788,7 +788,7 @@ static void davinci_nand_init(struct nand_chip *nand) nand->dev_ready = nand_davinci_dev_ready; } -#ifdef CONFIG_SYS_NAND_SELF_INIT +#if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) static int davinci_nand_probe(struct udevice *dev) { struct nand_chip *nand = dev_get_priv(dev); diff --git a/drivers/mtd/nand/raw/nand.c b/drivers/mtd/nand/raw/nand.c index 59ad139..4b5560d 100644 --- a/drivers/mtd/nand/raw/nand.c +++ b/drivers/mtd/nand/raw/nand.c @@ -76,7 +76,7 @@ int nand_register(int devnum, struct mtd_info *mtd) return 0; } -#ifndef CONFIG_SYS_NAND_SELF_INIT +#if !CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) static void nand_init_chip(int i) { struct nand_chip *nand = &nand_chip[i]; @@ -155,7 +155,7 @@ void nand_init(void) return; initialized = 1; -#ifdef CONFIG_SYS_NAND_SELF_INIT +#if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) board_nand_init(); #else int i; diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 2f56d46..f350c7e 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -57,7 +57,7 @@ config SF_DEFAULT_CS config SF_DEFAULT_MODE hex "SPI Flash default mode (see include/spi.h)" depends on SPI_FLASH || DM_SPI_FLASH - default 0 + default 0x0 help The default mode may be provided by the platform to handle the common case when only a single serial diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c1a4917..71e0cba 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1,6 +1,7 @@ source "drivers/net/phy/Kconfig" source "drivers/net/pfe_eth/Kconfig" source "drivers/net/fsl-mc/Kconfig" +source "drivers/net/bnxt/Kconfig" config ETH def_bool y @@ -554,6 +555,22 @@ config RTL8169 This driver supports Realtek 8169 series gigabit ethernet family of PCI/PCIe chipsets/adapters. +config SJA1105 + bool "NXP SJA1105 Ethernet switch family driver" + depends on DM_DSA && DM_SPI + select BITREVERSE + help + This is the driver for the NXP SJA1105 automotive Ethernet switch + family. These are 5-port devices and are managed over an SPI + interface. Probing is handled based on OF bindings. The driver + supports the following revisions: + - SJA1105E (Gen. 1, No TT-Ethernet) + - SJA1105T (Gen. 1, TT-Ethernet) + - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet) + - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet) + - SJA1105R (Gen. 2, SGMII, No TT-Ethernet) + - SJA1105S (Gen. 2, SGMII, TT-Ethernet) + config SMC911X bool "SMSC LAN911x and LAN921x controller driver" @@ -835,6 +852,13 @@ config FSL_LS_MDIO This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and on the mEMAC (which supports both Clauses 22 and 45). +config ASPEED_MDIO + bool "Aspeed MDIO interface support" + depends on DM_MDIO + help + This driver supports the MDIO bus of Aspeed AST2600 SOC. The driver + currently supports Clause 22. + config MDIO_MUX_MMIOREG bool "MDIO MUX accessed as a MMIO register access" depends on DM_MDIO_MUX diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e4078d1..a6d0c23 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -3,43 +3,53 @@ # (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -obj-y += phy/ -obj-$(CONFIG_ALTERA_TSE) += altera_tse.o obj-$(CONFIG_AG7XXX) += ag7xxx.o +obj-$(CONFIG_ALTERA_TSE) += altera_tse.o obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o +obj-$(CONFIG_ASPEED_MDIO) += aspeed_mdio.o obj-$(CONFIG_BCM6348_ETH) += bcm6348-eth.o obj-$(CONFIG_BCM6368_ETH) += bcm6368-eth.o obj-$(CONFIG_BCMGENET) += bcmgenet.o -obj-$(CONFIG_DRIVER_AX88180) += ax88180.o obj-$(CONFIG_BCM_SF2_ETH) += bcm-sf2-eth.o obj-$(CONFIG_BCM_SF2_ETH_GMAC) += bcm-sf2-eth-gmac.o +obj-$(CONFIG_BNXT_ETH) += bnxt/ obj-$(CONFIG_CALXEDA_XGMAC) += calxedaxgmac.o obj-$(CONFIG_CORTINA_NI_ENET) += cortina_ni.o obj-$(CONFIG_CS8900) += cs8900.o -obj-$(CONFIG_TULIP) += dc2114x.o -obj-$(CONFIG_ETH_DESIGNWARE) += designware.o -obj-$(CONFIG_ETH_DESIGNWARE_MESON8B) += dwmac_meson8b.o -obj-$(CONFIG_ETH_DESIGNWARE_SOCFPGA) += dwmac_socfpga.o -obj-$(CONFIG_ETH_DESIGNWARE_S700) += dwmac_s700.o -obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o +obj-$(CONFIG_DM_ETH_PHY) += eth-phy-uclass.o obj-$(CONFIG_DNET) += dnet.o +obj-$(CONFIG_DRIVER_AX88180) += ax88180.o +obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o obj-$(CONFIG_DSA_SANDBOX) += dsa_sandbox.o -obj-$(CONFIG_DM_ETH_PHY) += eth-phy-uclass.o +obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o obj-$(CONFIG_E1000) += e1000.o obj-$(CONFIG_E1000_SPI) += e1000_spi.o obj-$(CONFIG_EEPRO100) += eepro100.o -obj-$(CONFIG_SUN4I_EMAC) += sunxi_emac.o -obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o obj-$(CONFIG_EP93XX) += ep93xx_eth.o obj-$(CONFIG_ETHOC) += ethoc.o +obj-$(CONFIG_ETH_DESIGNWARE) += designware.o +obj-$(CONFIG_ETH_DESIGNWARE_MESON8B) += dwmac_meson8b.o +obj-$(CONFIG_ETH_DESIGNWARE_S700) += dwmac_s700.o +obj-$(CONFIG_ETH_DESIGNWARE_SOCFPGA) += dwmac_socfpga.o +obj-$(CONFIG_ETH_SANDBOX) += sandbox.o +obj-$(CONFIG_ETH_SANDBOX_RAW) += sandbox-raw-bus.o +obj-$(CONFIG_ETH_SANDBOX_RAW) += sandbox-raw.o obj-$(CONFIG_FEC_MXC) += fec_mxc.o obj-$(CONFIG_FMAN_ENET) += fm/ +obj-$(CONFIG_FMAN_ENET) += fsl_mdio.o obj-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o +obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o +obj-$(CONFIG_FSL_LS_MDIO) += fsl_ls_mdio.o +obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/ +obj-$(CONFIG_FSL_MC_ENET) += ldpaa_eth/ +obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o +obj-$(CONFIG_FSL_PFE) += pfe_eth/ obj-$(CONFIG_FTGMAC100) += ftgmac100.o -obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_FTMAC100) += ftmac100.o +obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_GMAC_ROCKCHIP) += gmac_rockchip.o +obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_KSZ9477) += ksz9477.o obj-$(CONFIG_LAN91C96) += lan91c96.o @@ -51,6 +61,8 @@ obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o obj-$(CONFIG_MDIO_MUX_MESON_G12A) += mdio_mux_meson_g12a.o obj-$(CONFIG_MDIO_MUX_MMIOREG) += mdio_mux_mmioreg.o obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o +obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o +obj-$(CONFIG_MEDIATEK_ETH) += mtk_eth.o obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o obj-$(CONFIG_MT7620_ETH) += mt7620-eth.o obj-$(CONFIG_MT7628_ETH) += mt7628-eth.o @@ -60,44 +72,35 @@ obj-$(CONFIG_MVNETA) += mvneta.o obj-$(CONFIG_MVPP2) += mvpp2.o obj-$(CONFIG_NATSEMI) += natsemi.o obj-$(CONFIG_NETCONSOLE) += netconsole.o +obj-$(CONFIG_NET_OCTEONTX) += octeontx/ +obj-$(CONFIG_NET_OCTEONTX2) += octeontx2/ obj-$(CONFIG_NS8382X) += ns8382x.o +obj-$(CONFIG_OCTEONTX2_CGX_INTF) += octeontx2/cgx_intf.o +obj-$(CONFIG_OCTEONTX_SMI) += octeontx/smi.o obj-$(CONFIG_PCH_GBE) += pch_gbe.o obj-$(CONFIG_PCNET) += pcnet.o +obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o +obj-$(CONFIG_RENESAS_RAVB) += ravb.o obj-$(CONFIG_RTL8139) += rtl8139.o obj-$(CONFIG_RTL8169) += rtl8169.o -obj-$(CONFIG_ETH_SANDBOX) += sandbox.o -obj-$(CONFIG_ETH_SANDBOX_RAW) += sandbox-raw.o -obj-$(CONFIG_ETH_SANDBOX_RAW) += sandbox-raw-bus.o obj-$(CONFIG_SH_ETHER) += sh_eth.o -obj-$(CONFIG_RENESAS_RAVB) += ravb.o +obj-$(CONFIG_SJA1105) += sja1105.o obj-$(CONFIG_SMC91111) += smc91111.o obj-$(CONFIG_SMC911X) += smc911x.o +obj-$(CONFIG_SNI_AVE) += sni_ave.o +obj-$(CONFIG_SNI_NETSEC) += sni_netsec.o +obj-$(CONFIG_SUN4I_EMAC) += sunxi_emac.o +obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o -obj-$(CONFIG_NET_OCTEONTX) += octeontx/ -obj-$(CONFIG_NET_OCTEONTX2) += octeontx2/ -obj-$(CONFIG_OCTEONTX_SMI) += octeontx/smi.o -obj-$(CONFIG_OCTEONTX2_CGX_INTF) += octeontx2/cgx_intf.o -obj-$(CONFIG_FMAN_ENET) += fsl_mdio.o +obj-$(CONFIG_TULIP) += dc2114x.o obj-$(CONFIG_ULI526X) += uli526x.o obj-$(CONFIG_VSC7385_ENET) += vsc7385.o +obj-$(CONFIG_VSC9953) += vsc9953.o obj-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o obj-$(CONFIG_XILINX_AXIMRMAC) += xilinx_axi_mrmac.o obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o -obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/ -obj-$(CONFIG_FSL_MC_ENET) += ldpaa_eth/ -obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o -obj-$(CONFIG_VSC9953) += vsc9953.o -obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o -obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o -obj-$(CONFIG_FSL_PFE) += pfe_eth/ +obj-y += mscc_eswitch/ +obj-y += phy/ obj-y += qe/ -obj-$(CONFIG_SNI_AVE) += sni_ave.o -obj-$(CONFIG_SNI_NETSEC) += sni_netsec.o obj-y += ti/ -obj-$(CONFIG_MEDIATEK_ETH) += mtk_eth.o -obj-y += mscc_eswitch/ -obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o -obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o -obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o -obj-$(CONFIG_FSL_LS_MDIO) += fsl_ls_mdio.o diff --git a/drivers/net/aspeed_mdio.c b/drivers/net/aspeed_mdio.c new file mode 100644 index 0000000..a99715a --- /dev/null +++ b/drivers/net/aspeed_mdio.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Aspeed MDIO driver + * + * (C) Copyright 2021 Aspeed Technology Inc. + * + * This file is inspired from the Linux kernel driver drivers/net/phy/mdio-aspeed.c + */ + +#include <common.h> +#include <dm.h> +#include <log.h> +#include <miiphy.h> +#include <net.h> +#include <reset.h> +#include <linux/bitops.h> +#include <linux/bitfield.h> +#include <linux/io.h> +#include <linux/iopoll.h> + +#define ASPEED_MDIO_CTRL 0x0 +#define ASPEED_MDIO_CTRL_FIRE BIT(31) +#define ASPEED_MDIO_CTRL_ST BIT(28) +#define ASPEED_MDIO_CTRL_ST_C45 0 +#define ASPEED_MDIO_CTRL_ST_C22 1 +#define ASPEED_MDIO_CTRL_OP GENMASK(27, 26) +#define MDIO_C22_OP_WRITE 0b01 +#define MDIO_C22_OP_READ 0b10 +#define ASPEED_MDIO_CTRL_PHYAD GENMASK(25, 21) +#define ASPEED_MDIO_CTRL_REGAD GENMASK(20, 16) +#define ASPEED_MDIO_CTRL_MIIWDATA GENMASK(15, 0) + +#define ASPEED_MDIO_DATA 0x4 +#define ASPEED_MDIO_DATA_MDC_THRES GENMASK(31, 24) +#define ASPEED_MDIO_DATA_MDIO_EDGE BIT(23) +#define ASPEED_MDIO_DATA_MDIO_LATCH GENMASK(22, 20) +#define ASPEED_MDIO_DATA_IDLE BIT(16) +#define ASPEED_MDIO_DATA_MIIRDATA GENMASK(15, 0) + +#define ASPEED_MDIO_TIMEOUT_US 1000 + +struct aspeed_mdio_priv { + void *base; +}; + +static int aspeed_mdio_read(struct udevice *mdio_dev, int addr, int devad, int reg) +{ + struct aspeed_mdio_priv *priv = dev_get_priv(mdio_dev); + u32 ctrl; + u32 data; + int rc; + + if (devad != MDIO_DEVAD_NONE) + return -EOPNOTSUPP; + + ctrl = ASPEED_MDIO_CTRL_FIRE + | FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22) + | FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_READ) + | FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr) + | FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, reg); + + writel(ctrl, priv->base + ASPEED_MDIO_CTRL); + + rc = readl_poll_timeout(priv->base + ASPEED_MDIO_DATA, data, + data & ASPEED_MDIO_DATA_IDLE, + ASPEED_MDIO_TIMEOUT_US); + + if (rc < 0) + return rc; + + return FIELD_GET(ASPEED_MDIO_DATA_MIIRDATA, data); +} + +static int aspeed_mdio_write(struct udevice *mdio_dev, int addr, int devad, int reg, u16 val) +{ + struct aspeed_mdio_priv *priv = dev_get_priv(mdio_dev); + u32 ctrl; + + if (devad != MDIO_DEVAD_NONE) + return -EOPNOTSUPP; + + ctrl = ASPEED_MDIO_CTRL_FIRE + | FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22) + | FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_WRITE) + | FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr) + | FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, reg) + | FIELD_PREP(ASPEED_MDIO_CTRL_MIIWDATA, val); + + writel(ctrl, priv->base + ASPEED_MDIO_CTRL); + + return readl_poll_timeout(priv->base + ASPEED_MDIO_CTRL, ctrl, + !(ctrl & ASPEED_MDIO_CTRL_FIRE), + ASPEED_MDIO_TIMEOUT_US); +} + +static const struct mdio_ops aspeed_mdio_ops = { + .read = aspeed_mdio_read, + .write = aspeed_mdio_write, +}; + +static int aspeed_mdio_probe(struct udevice *dev) +{ + struct aspeed_mdio_priv *priv = dev_get_priv(dev); + struct reset_ctl reset_ctl; + int ret = 0; + + priv->base = dev_read_addr_ptr(dev); + + ret = reset_get_by_index(dev, 0, &reset_ctl); + reset_deassert(&reset_ctl); + + return 0; +} + +static const struct udevice_id aspeed_mdio_ids[] = { + { .compatible = "aspeed,ast2600-mdio" }, + { } +}; + +U_BOOT_DRIVER(aspeed_mdio) = { + .name = "aspeed_mdio", + .id = UCLASS_MDIO, + .of_match = aspeed_mdio_ids, + .probe = aspeed_mdio_probe, + .ops = &aspeed_mdio_ops, + .plat_auto = sizeof(struct mdio_perdev_priv), + .priv_auto = sizeof(struct aspeed_mdio_priv), +}; diff --git a/drivers/net/bnxt/Kconfig b/drivers/net/bnxt/Kconfig new file mode 100644 index 0000000..412ecd4 --- /dev/null +++ b/drivers/net/bnxt/Kconfig @@ -0,0 +1,7 @@ +config BNXT_ETH + bool "BNXT PCI support" + depends on DM_ETH + select PCI_INIT_R + help + This driver implements support for bnxt pci controller + driver of ethernet class. diff --git a/drivers/net/bnxt/Makefile b/drivers/net/bnxt/Makefile new file mode 100644 index 0000000..a9d6ce0 --- /dev/null +++ b/drivers/net/bnxt/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2019-2021 Broadcom. + +# Broadcom nxe Ethernet driver +obj-y += bnxt.o diff --git a/drivers/net/bnxt/bnxt.c b/drivers/net/bnxt/bnxt.c new file mode 100644 index 0000000..9844e96 --- /dev/null +++ b/drivers/net/bnxt/bnxt.c @@ -0,0 +1,1708 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 Broadcom. + */ + +#include <common.h> + +#include <asm/io.h> +#include <dm.h> +#include <linux/delay.h> +#include <memalign.h> +#include <net.h> + +#include "bnxt.h" +#include "bnxt_dbg.h" + +#define bnxt_down_chip(bp) bnxt_hwrm_run(down_chip, bp, 0) +#define bnxt_bring_chip(bp) bnxt_hwrm_run(bring_chip, bp, 1) + +/* Broadcom ethernet driver PCI APIs. */ +static void bnxt_bring_pci(struct bnxt *bp) +{ + u16 cmd_reg = 0; + + dm_pci_read_config16(bp->pdev, PCI_VENDOR_ID, &bp->vendor_id); + dm_pci_read_config16(bp->pdev, PCI_DEVICE_ID, &bp->device_id); + dm_pci_read_config16(bp->pdev, PCI_SUBSYSTEM_VENDOR_ID, &bp->subsystem_vendor); + dm_pci_read_config16(bp->pdev, PCI_SUBSYSTEM_ID, &bp->subsystem_device); + dm_pci_read_config16(bp->pdev, PCI_COMMAND, &bp->cmd_reg); + dm_pci_read_config8(bp->pdev, PCI_INTERRUPT_LINE, &bp->irq); + bp->bar0 = dm_pci_map_bar(bp->pdev, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); + bp->bar1 = dm_pci_map_bar(bp->pdev, PCI_BASE_ADDRESS_2, PCI_REGION_MEM); + bp->bar2 = dm_pci_map_bar(bp->pdev, PCI_BASE_ADDRESS_4, PCI_REGION_MEM); + cmd_reg = bp->cmd_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd_reg |= PCI_COMMAND_INTX_DISABLE; /* disable intr */ + dm_pci_write_config16(bp->pdev, PCI_COMMAND, cmd_reg); + dm_pci_read_config16(bp->pdev, PCI_COMMAND, &cmd_reg); + dbg_pci(bp, __func__, cmd_reg); +} + +int bnxt_free_rx_iob(struct bnxt *bp) +{ + unsigned int i; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_RX_IOB))) + return STATUS_SUCCESS; + + for (i = 0; i < bp->rx.buf_cnt; i++) { + if (bp->rx.iob[i]) { + free(bp->rx.iob[i]); + bp->rx.iob[i] = NULL; + } + } + + FLAG_RESET(bp->flag_hwrm, VALID_RX_IOB); + + return STATUS_SUCCESS; +} + +static void set_rx_desc(u8 *buf, void *iob, u16 cons_id, u32 iob_idx) +{ + struct rx_prod_pkt_bd *desc; + u16 off = cons_id * sizeof(struct rx_prod_pkt_bd); + + desc = (struct rx_prod_pkt_bd *)&buf[off]; + desc->flags_type = RX_PROD_PKT_BD_TYPE_RX_PROD_PKT; + desc->len = MAX_ETHERNET_PACKET_BUFFER_SIZE; + desc->opaque = iob_idx; + desc->dma.addr = virt_to_bus(iob); +} + +static int bnxt_alloc_rx_iob(struct bnxt *bp, u16 cons_id, u16 iob_idx) +{ + void *iob; + + iob = memalign(BNXT_DMA_ALIGNMENT, RX_STD_DMA_ALIGNED); + if (!iob) + return -ENOMEM; + + dbg_rx_iob(iob, iob_idx, cons_id); + set_rx_desc((u8 *)bp->rx.bd_virt, iob, cons_id, (u32)iob_idx); + bp->rx.iob[iob_idx] = iob; + + return 0; +} + +void bnxt_mm_init(struct bnxt *bp, const char *func) +{ + memset(bp->hwrm_addr_req, 0, REQ_BUFFER_SIZE); + memset(bp->hwrm_addr_resp, 0, RESP_BUFFER_SIZE); + memset(bp->cq.bd_virt, 0, CQ_RING_DMA_BUFFER_SIZE); + memset(bp->tx.bd_virt, 0, TX_RING_DMA_BUFFER_SIZE); + memset(bp->rx.bd_virt, 0, RX_RING_DMA_BUFFER_SIZE); + + bp->data_addr_mapping = virt_to_bus(bp->hwrm_addr_data); + bp->req_addr_mapping = virt_to_bus(bp->hwrm_addr_req); + bp->resp_addr_mapping = virt_to_bus(bp->hwrm_addr_resp); + bp->wait_link_timeout = LINK_DEFAULT_TIMEOUT; + bp->link_status = STATUS_LINK_DOWN; + bp->media_change = 1; + bp->mtu = MAX_ETHERNET_PACKET_BUFFER_SIZE; + bp->hwrm_max_req_len = HWRM_MAX_REQ_LEN; + bp->rx.buf_cnt = NUM_RX_BUFFERS; + bp->rx.ring_cnt = MAX_RX_DESC_CNT; + bp->tx.ring_cnt = MAX_TX_DESC_CNT; + bp->cq.ring_cnt = MAX_CQ_DESC_CNT; + bp->cq.completion_bit = 0x1; + bp->link_set = LINK_SPEED_DRV_100G; + dbg_mem(bp, func); +} + +void bnxt_free_mem(struct bnxt *bp) +{ + if (bp->cq.bd_virt) { + free(bp->cq.bd_virt); + bp->cq.bd_virt = NULL; + } + + if (bp->rx.bd_virt) { + free(bp->rx.bd_virt); + bp->rx.bd_virt = NULL; + } + + if (bp->tx.bd_virt) { + free(bp->tx.bd_virt); + bp->tx.bd_virt = NULL; + } + + if (bp->hwrm_addr_resp) { + free(bp->hwrm_addr_resp); + bp->resp_addr_mapping = 0; + bp->hwrm_addr_resp = NULL; + } + + if (bp->hwrm_addr_req) { + free(bp->hwrm_addr_req); + bp->req_addr_mapping = 0; + bp->hwrm_addr_req = NULL; + } + + if (bp->hwrm_addr_data) { + free(bp->hwrm_addr_data); + bp->data_addr_mapping = 0; + bp->hwrm_addr_data = NULL; + } + + dbg_mem_free_done(__func__); +} + +int bnxt_alloc_mem(struct bnxt *bp) +{ + bp->hwrm_addr_data = memalign(BNXT_DMA_ALIGNMENT, DMA_BUF_SIZE_ALIGNED); + bp->hwrm_addr_req = memalign(BNXT_DMA_ALIGNMENT, REQ_BUF_SIZE_ALIGNED); + bp->hwrm_addr_resp = MEM_HWRM_RESP; + + memset(&bp->tx, 0, sizeof(struct lm_tx_info_t)); + memset(&bp->rx, 0, sizeof(struct lm_rx_info_t)); + memset(&bp->cq, 0, sizeof(struct lm_cmp_info_t)); + + bp->tx.bd_virt = memalign(BNXT_DMA_ALIGNMENT, TX_RING_DMA_BUFFER_SIZE); + bp->rx.bd_virt = memalign(BNXT_DMA_ALIGNMENT, RX_RING_DMA_BUFFER_SIZE); + bp->cq.bd_virt = memalign(BNXT_DMA_ALIGNMENT, CQ_RING_DMA_BUFFER_SIZE); + + if (bp->hwrm_addr_req && + bp->hwrm_addr_resp && + bp->hwrm_addr_data && + bp->tx.bd_virt && + bp->rx.bd_virt && + bp->cq.bd_virt) { + bnxt_mm_init(bp, __func__); + return STATUS_SUCCESS; + } + + dbg_mem_alloc_fail(__func__); + bnxt_free_mem(bp); + + return -ENOMEM; +} + +static void hwrm_init(struct bnxt *bp, struct input *req, u16 cmd, u16 len) +{ + memset(req, 0, len); + req->req_type = cmd; + req->cmpl_ring = (u16)HWRM_NA_SIGNATURE; + req->target_id = (u16)HWRM_NA_SIGNATURE; + req->resp_addr = bp->resp_addr_mapping; + req->seq_id = bp->seq_id++; +} + +static void hwrm_write_req(struct bnxt *bp, void *req, u32 cnt) +{ + u32 i = 0; + + for (i = 0; i < cnt; i++) + writel(((u32 *)req)[i], bp->bar0 + GRC_COM_CHAN_BASE + (i * 4)); + + writel(0x1, (bp->bar0 + GRC_COM_CHAN_BASE + GRC_COM_CHAN_TRIG)); +} + +static void short_hwrm_cmd_req(struct bnxt *bp, u16 len) +{ + struct hwrm_short_input sreq; + + memset(&sreq, 0, sizeof(struct hwrm_short_input)); + sreq.req_type = (u16)((struct input *)bp->hwrm_addr_req)->req_type; + sreq.signature = SHORT_REQ_SIGNATURE_SHORT_CMD; + sreq.size = len; + sreq.req_addr = bp->req_addr_mapping; + dbg_short_cmd((u8 *)&sreq, __func__, sizeof(struct hwrm_short_input)); + hwrm_write_req(bp, &sreq, sizeof(struct hwrm_short_input) / 4); +} + +static int wait_resp(struct bnxt *bp, u32 tmo, u16 len, const char *func) +{ + struct input *req = (struct input *)bp->hwrm_addr_req; + struct output *resp = (struct output *)bp->hwrm_addr_resp; + u8 *ptr = (u8 *)resp; + u32 idx; + u32 wait_cnt = HWRM_CMD_DEFAULT_MULTIPLAYER((u32)tmo); + u16 resp_len = 0; + u16 ret = STATUS_TIMEOUT; + + if (len > bp->hwrm_max_req_len) + short_hwrm_cmd_req(bp, len); + else + hwrm_write_req(bp, req, (u32)(len / 4)); + + for (idx = 0; idx < wait_cnt; idx++) { + resp_len = resp->resp_len; + if (resp->seq_id == req->seq_id && resp->req_type == req->req_type && + ptr[resp_len - 1] == 1) { + bp->last_resp_code = resp->error_code; + ret = resp->error_code; + break; + } + + udelay(HWRM_CMD_POLL_WAIT_TIME); + } + + dbg_hw_cmd(bp, func, len, resp_len, tmo, ret); + + return (int)ret; +} + +static void bnxt_db_cq(struct bnxt *bp) +{ + writel(CQ_DOORBELL_KEY_IDX(bp->cq.cons_idx), bp->bar1); +} + +static void bnxt_db_rx(struct bnxt *bp, u32 idx) +{ + writel(RX_DOORBELL_KEY_RX | idx, bp->bar1); +} + +static void bnxt_db_tx(struct bnxt *bp, u32 idx) +{ + writel((u32)(TX_DOORBELL_KEY_TX | idx), bp->bar1); +} + +int iob_pad(void *packet, int length) +{ + if (length >= ETH_ZLEN) + return length; + + memset(((u8 *)packet + length), 0x00, (ETH_ZLEN - length)); + + return ETH_ZLEN; +} + +static inline u32 bnxt_tx_avail(struct bnxt *bp) +{ + barrier(); + + return TX_AVAIL(bp->tx.ring_cnt) - + ((bp->tx.prod_id - bp->tx.cons_id) & + (bp->tx.ring_cnt - 1)); +} + +void set_txq(struct bnxt *bp, int entry, dma_addr_t mapping, int len) +{ + struct tx_bd_short *prod_bd; + + prod_bd = (struct tx_bd_short *)BD_NOW(bp->tx.bd_virt, + entry, + sizeof(struct tx_bd_short)); + if (len < 512) + prod_bd->flags_type = TX_BD_SHORT_FLAGS_LHINT_LT512; + else if (len < 1024) + prod_bd->flags_type = TX_BD_SHORT_FLAGS_LHINT_LT1K; + else if (len < 2048) + prod_bd->flags_type = TX_BD_SHORT_FLAGS_LHINT_LT2K; + else + prod_bd->flags_type = TX_BD_SHORT_FLAGS_LHINT_GTE2K; + + prod_bd->flags_type |= TX_BD_FLAGS; + prod_bd->dma.addr = mapping; + prod_bd->len = len; + prod_bd->opaque = (u32)entry; + dump_tx_bd(prod_bd, (u16)(sizeof(struct tx_bd_short))); +} + +static void bnxt_tx_complete(struct bnxt *bp) +{ + bp->tx.cons_id = NEXT_IDX(bp->tx.cons_id, bp->tx.ring_cnt); + bp->tx.cnt++; + dump_tx_stat(bp); +} + +int post_rx_buffers(struct bnxt *bp) +{ + u16 cons_id = (bp->rx.cons_idx % bp->rx.ring_cnt); + u16 iob_idx; + + while (bp->rx.iob_cnt < bp->rx.buf_cnt) { + iob_idx = (cons_id % bp->rx.buf_cnt); + if (!bp->rx.iob[iob_idx]) { + if (bnxt_alloc_rx_iob(bp, cons_id, iob_idx) < 0) { + dbg_rx_alloc_iob_fail(iob_idx, cons_id); + break; + } + } + + cons_id = NEXT_IDX(cons_id, bp->rx.ring_cnt); + bp->rx.iob_cnt++; + } + + if (cons_id != bp->rx.cons_idx) { + dbg_rx_cid(bp->rx.cons_idx, cons_id); + bp->rx.cons_idx = cons_id; + bnxt_db_rx(bp, (u32)cons_id); + } + + FLAG_SET(bp->flag_hwrm, VALID_RX_IOB); + + return STATUS_SUCCESS; +} + +u8 bnxt_rx_drop(struct bnxt *bp, u8 *rx_buf, struct rx_pkt_cmpl_hi *rx_cmp_hi) +{ + u8 chksum_err = 0; + u8 i; + u16 error_flags; + + error_flags = (rx_cmp_hi->errors_v2 >> + RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT); + if (rx_cmp_hi->errors_v2 == 0x20 || rx_cmp_hi->errors_v2 == 0x21) + chksum_err = 1; + + if (error_flags && !chksum_err) { + bp->rx.err++; + return 1; + } + + for (i = 0; i < 6; i++) { + if (rx_buf[6 + i] != bp->mac_set[i]) + break; + } + + if (i == 6) { + bp->rx.dropped++; + return 2; /* Drop the loopback packets */ + } + + return 0; +} + +static void bnxt_adv_cq_index(struct bnxt *bp, u16 count) +{ + u16 cons_idx = bp->cq.cons_idx + count; + + if (cons_idx >= MAX_CQ_DESC_CNT) { + /* Toggle completion bit when the ring wraps. */ + bp->cq.completion_bit ^= 1; + cons_idx = cons_idx - MAX_CQ_DESC_CNT; + } + + bp->cq.cons_idx = cons_idx; +} + +void bnxt_adv_rx_index(struct bnxt *bp, u8 *iob, u32 iob_idx) +{ + u16 cons_id = (bp->rx.cons_idx % bp->rx.ring_cnt); + + set_rx_desc((u8 *)bp->rx.bd_virt, (void *)iob, cons_id, iob_idx); + cons_id = NEXT_IDX(cons_id, bp->rx.ring_cnt); + if (cons_id != bp->rx.cons_idx) { + dbg_rx_cid(bp->rx.cons_idx, cons_id); + bp->rx.cons_idx = cons_id; + bnxt_db_rx(bp, (u32)cons_id); + } +} + +void rx_process(struct bnxt *bp, struct rx_pkt_cmpl *rx_cmp, + struct rx_pkt_cmpl_hi *rx_cmp_hi) +{ + u32 desc_idx = rx_cmp->opaque; + u8 *iob = bp->rx.iob[desc_idx]; + + dump_rx_bd(rx_cmp, rx_cmp_hi, desc_idx); + bp->rx.iob_len = rx_cmp->len; + bp->rx.iob_rx = iob; + if (bnxt_rx_drop(bp, iob, rx_cmp_hi)) + bp->rx.iob_recv = PKT_DROPPED; + else + bp->rx.iob_recv = PKT_RECEIVED; + + bp->rx.rx_cnt++; + + dbg_rxp(bp->rx.iob_rx, bp->rx.iob_len, bp->rx.iob_recv); + bnxt_adv_rx_index(bp, iob, desc_idx); + bnxt_adv_cq_index(bp, 2); /* Rx completion is 2 entries. */ +} + +static int bnxt_rx_complete(struct bnxt *bp, struct rx_pkt_cmpl *rx_cmp) +{ + struct rx_pkt_cmpl_hi *rx_cmp_hi; + u8 completion_bit = bp->cq.completion_bit; + + if (bp->cq.cons_idx == (bp->cq.ring_cnt - 1)) { + rx_cmp_hi = (struct rx_pkt_cmpl_hi *)bp->cq.bd_virt; + completion_bit ^= 0x1; /* Ring has wrapped. */ + } else { + rx_cmp_hi = (struct rx_pkt_cmpl_hi *)(rx_cmp + 1); + } + + if (!((rx_cmp_hi->errors_v2 & RX_PKT_CMPL_V2) ^ completion_bit)) + rx_process(bp, rx_cmp, rx_cmp_hi); + + return NO_MORE_CQ_BD_TO_SERVICE; +} + +static int bnxt_hwrm_ver_get(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_ver_get_input); + struct hwrm_ver_get_input *req; + struct hwrm_ver_get_output *resp; + int rc; + + req = (struct hwrm_ver_get_input *)bp->hwrm_addr_req; + resp = (struct hwrm_ver_get_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_VER_GET, cmd_len); + req->hwrm_intf_maj = HWRM_VERSION_MAJOR; + req->hwrm_intf_min = HWRM_VERSION_MINOR; + req->hwrm_intf_upd = HWRM_VERSION_UPDATE; + rc = wait_resp(bp, HWRM_CMD_DEFAULT_TIMEOUT, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + bp->hwrm_spec_code = + resp->hwrm_intf_maj_8b << 16 | + resp->hwrm_intf_min_8b << 8 | + resp->hwrm_intf_upd_8b; + bp->hwrm_cmd_timeout = (u32)resp->def_req_timeout; + if (!bp->hwrm_cmd_timeout) + bp->hwrm_cmd_timeout = (u32)HWRM_CMD_DEFAULT_TIMEOUT; + + if (resp->hwrm_intf_maj_8b >= 1) + bp->hwrm_max_req_len = resp->max_req_win_len; + + bp->chip_id = + resp->chip_rev << 24 | + resp->chip_metal << 16 | + resp->chip_bond_id << 8 | + resp->chip_platform_type; + bp->chip_num = resp->chip_num; + if ((resp->dev_caps_cfg & SHORT_CMD_SUPPORTED) && + (resp->dev_caps_cfg & SHORT_CMD_REQUIRED)) + FLAG_SET(bp->flags, BNXT_FLAG_HWRM_SHORT_CMD_SUPP); + + bp->hwrm_max_ext_req_len = resp->max_ext_req_len; + bp->fw_maj = resp->hwrm_fw_maj_8b; + bp->fw_min = resp->hwrm_fw_min_8b; + bp->fw_bld = resp->hwrm_fw_bld_8b; + bp->fw_rsvd = resp->hwrm_fw_rsvd_8b; + print_fw_ver(resp, bp->hwrm_cmd_timeout); + + return STATUS_SUCCESS; +} + +/* Broadcom ethernet driver Function HW cmds APIs. */ +static int bnxt_hwrm_func_resource_qcaps(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_func_resource_qcaps_input); + struct hwrm_func_resource_qcaps_input *req; + struct hwrm_func_resource_qcaps_output *resp; + int rc; + + req = (struct hwrm_func_resource_qcaps_input *)bp->hwrm_addr_req; + resp = (struct hwrm_func_resource_qcaps_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_FUNC_RESOURCE_QCAPS, cmd_len); + req->fid = (u16)HWRM_NA_SIGNATURE; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc != STATUS_SUCCESS) + return STATUS_SUCCESS; + + FLAG_SET(bp->flags, BNXT_FLAG_RESOURCE_QCAPS_SUPPORT); + /* VFs */ + bp->max_vfs = resp->max_vfs; + bp->vf_res_strategy = resp->vf_reservation_strategy; + /* vNICs */ + bp->min_vnics = resp->min_vnics; + bp->max_vnics = resp->max_vnics; + /* MSI-X */ + bp->max_msix = resp->max_msix; + /* Ring Groups */ + bp->min_hw_ring_grps = resp->min_hw_ring_grps; + bp->max_hw_ring_grps = resp->max_hw_ring_grps; + /* TX Rings */ + bp->min_tx_rings = resp->min_tx_rings; + bp->max_tx_rings = resp->max_tx_rings; + /* RX Rings */ + bp->min_rx_rings = resp->min_rx_rings; + bp->max_rx_rings = resp->max_rx_rings; + /* Completion Rings */ + bp->min_cp_rings = resp->min_cmpl_rings; + bp->max_cp_rings = resp->max_cmpl_rings; + /* RSS Contexts */ + bp->min_rsscos_ctxs = resp->min_rsscos_ctx; + bp->max_rsscos_ctxs = resp->max_rsscos_ctx; + /* L2 Contexts */ + bp->min_l2_ctxs = resp->min_l2_ctxs; + bp->max_l2_ctxs = resp->max_l2_ctxs; + /* Statistic Contexts */ + bp->min_stat_ctxs = resp->min_stat_ctx; + bp->max_stat_ctxs = resp->max_stat_ctx; + dbg_func_resource_qcaps(bp); + + return STATUS_SUCCESS; +} + +static u32 set_ring_info(struct bnxt *bp) +{ + u32 enables = 0; + + bp->num_cmpl_rings = DEFAULT_NUMBER_OF_CMPL_RINGS; + bp->num_tx_rings = DEFAULT_NUMBER_OF_TX_RINGS; + bp->num_rx_rings = DEFAULT_NUMBER_OF_RX_RINGS; + bp->num_hw_ring_grps = DEFAULT_NUMBER_OF_RING_GRPS; + bp->num_stat_ctxs = DEFAULT_NUMBER_OF_STAT_CTXS; + if (bp->min_cp_rings <= DEFAULT_NUMBER_OF_CMPL_RINGS) + bp->num_cmpl_rings = bp->min_cp_rings; + + if (bp->min_tx_rings <= DEFAULT_NUMBER_OF_TX_RINGS) + bp->num_tx_rings = bp->min_tx_rings; + + if (bp->min_rx_rings <= DEFAULT_NUMBER_OF_RX_RINGS) + bp->num_rx_rings = bp->min_rx_rings; + + if (bp->min_hw_ring_grps <= DEFAULT_NUMBER_OF_RING_GRPS) + bp->num_hw_ring_grps = bp->min_hw_ring_grps; + + if (bp->min_stat_ctxs <= DEFAULT_NUMBER_OF_STAT_CTXS) + bp->num_stat_ctxs = bp->min_stat_ctxs; + + print_num_rings(bp); + enables = (FUNC_CFG_REQ_ENABLES_NUM_CMPL_RINGS | + FUNC_CFG_REQ_ENABLES_NUM_TX_RINGS | + FUNC_CFG_REQ_ENABLES_NUM_RX_RINGS | + FUNC_CFG_REQ_ENABLES_NUM_STAT_CTXS | + FUNC_CFG_REQ_ENABLES_NUM_HW_RING_GRPS); + + return enables; +} + +static void bnxt_hwrm_assign_resources(struct bnxt *bp) +{ + struct hwrm_func_cfg_input *req; + u32 enables = 0; + + if (FLAG_TEST(bp->flags, BNXT_FLAG_RESOURCE_QCAPS_SUPPORT)) + enables = set_ring_info(bp); + + req = (struct hwrm_func_cfg_input *)bp->hwrm_addr_req; + req->num_cmpl_rings = bp->num_cmpl_rings; + req->num_tx_rings = bp->num_tx_rings; + req->num_rx_rings = bp->num_rx_rings; + req->num_stat_ctxs = bp->num_stat_ctxs; + req->num_hw_ring_grps = bp->num_hw_ring_grps; + req->enables = enables; +} + +int bnxt_hwrm_nvm_flush(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_nvm_flush_input); + struct hwrm_nvm_flush_input *req; + int rc; + + req = (struct hwrm_nvm_flush_input *)bp->hwrm_addr_req; + + hwrm_init(bp, (void *)req, (u16)HWRM_NVM_FLUSH, cmd_len); + + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_func_qcaps_req(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_func_qcaps_input); + struct hwrm_func_qcaps_input *req; + struct hwrm_func_qcaps_output *resp; + int rc; + + req = (struct hwrm_func_qcaps_input *)bp->hwrm_addr_req; + resp = (struct hwrm_func_qcaps_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_FUNC_QCAPS, cmd_len); + req->fid = (u16)HWRM_NA_SIGNATURE; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + bp->fid = resp->fid; + bp->port_idx = (u8)resp->port_id; + + /* Get MAC address for this PF */ + memcpy(&bp->mac_addr[0], &resp->mac_address[0], ETH_ALEN); + + memcpy(&bp->mac_set[0], &bp->mac_addr[0], ETH_ALEN); + + print_func_qcaps(bp); + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_func_qcfg_req(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_func_qcfg_input); + struct hwrm_func_qcfg_input *req; + struct hwrm_func_qcfg_output *resp; + int rc; + + req = (struct hwrm_func_qcfg_input *)bp->hwrm_addr_req; + resp = (struct hwrm_func_qcfg_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_FUNC_QCFG, cmd_len); + req->fid = (u16)HWRM_NA_SIGNATURE; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + if (resp->flags & FUNC_QCFG_RESP_FLAGS_MULTI_HOST) + FLAG_SET(bp->flags, BNXT_FLAG_MULTI_HOST); + + if (resp->port_partition_type & + FUNC_QCFG_RESP_PORT_PARTITION_TYPE_NPAR1_0) + FLAG_SET(bp->flags, BNXT_FLAG_NPAR_MODE); + + bp->ordinal_value = (u8)resp->pci_id & 0x0F; + bp->stat_ctx_id = resp->stat_ctx_id; + memcpy(&bp->mac_addr[0], &resp->mac_address[0], ETH_ALEN); + print_func_qcfg(bp); + dbg_flags(__func__, bp->flags); + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_func_reset_req(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_func_reset_input); + struct hwrm_func_reset_input *req; + + req = (struct hwrm_func_reset_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_FUNC_RESET, cmd_len); + req->func_reset_level = FUNC_RESET_REQ_FUNC_RESET_LEVEL_RESETME; + + return wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); +} + +static int bnxt_hwrm_func_cfg_req(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_func_cfg_input); + struct hwrm_func_cfg_input *req; + + req = (struct hwrm_func_cfg_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_FUNC_CFG, cmd_len); + req->fid = (u16)HWRM_NA_SIGNATURE; + bnxt_hwrm_assign_resources(bp); + + return wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); +} + +static int bnxt_hwrm_func_drv_rgtr(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_func_drv_rgtr_input); + struct hwrm_func_drv_rgtr_input *req; + int rc; + + req = (struct hwrm_func_drv_rgtr_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_FUNC_DRV_RGTR, cmd_len); + /* Register with HWRM */ + req->enables = FUNC_DRV_RGTR_REQ_ENABLES_OS_TYPE | + FUNC_DRV_RGTR_REQ_ENABLES_ASYNC_EVENT_FWD | + FUNC_DRV_RGTR_REQ_ENABLES_VER; + req->async_event_fwd[0] |= 0x01; + req->os_type = FUNC_DRV_RGTR_REQ_OS_TYPE_OTHER; + req->ver_maj = DRIVER_VERSION_MAJOR; + req->ver_min = DRIVER_VERSION_MINOR; + req->ver_upd = DRIVER_VERSION_UPDATE; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_SET(bp->flag_hwrm, VALID_DRIVER_REG); + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_func_drv_unrgtr(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_func_drv_unrgtr_input); + struct hwrm_func_drv_unrgtr_input *req; + int rc; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_DRIVER_REG))) + return STATUS_SUCCESS; + + req = (struct hwrm_func_drv_unrgtr_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_FUNC_DRV_UNRGTR, cmd_len); + req->flags = FUNC_DRV_UNRGTR_REQ_FLAGS_PREPARE_FOR_SHUTDOWN; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_RESET(bp->flag_hwrm, VALID_DRIVER_REG); + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_cfa_l2_filter_alloc(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_cfa_l2_filter_alloc_input); + struct hwrm_cfa_l2_filter_alloc_input *req; + struct hwrm_cfa_l2_filter_alloc_output *resp; + int rc; + u32 flags = CFA_L2_FILTER_ALLOC_REQ_FLAGS_PATH_RX; + u32 enables; + + req = (struct hwrm_cfa_l2_filter_alloc_input *)bp->hwrm_addr_req; + resp = (struct hwrm_cfa_l2_filter_alloc_output *)bp->hwrm_addr_resp; + enables = CFA_L2_FILTER_ALLOC_REQ_ENABLES_DST_ID | + CFA_L2_FILTER_ALLOC_REQ_ENABLES_L2_ADDR | + CFA_L2_FILTER_ALLOC_REQ_ENABLES_L2_ADDR_MASK; + + hwrm_init(bp, (void *)req, (u16)HWRM_CFA_L2_FILTER_ALLOC, cmd_len); + req->flags = flags; + req->enables = enables; + memcpy((char *)&req->l2_addr[0], (char *)&bp->mac_set[0], ETH_ALEN); + memset((char *)&req->l2_addr_mask[0], 0xff, ETH_ALEN); + memcpy((char *)&req->t_l2_addr[0], (char *)&bp->mac_set[0], ETH_ALEN); + memset((char *)&req->t_l2_addr_mask[0], 0xff, ETH_ALEN); + req->src_type = CFA_L2_FILTER_ALLOC_REQ_SRC_TYPE_NPORT; + req->src_id = (u32)bp->port_idx; + req->dst_id = bp->vnic_id; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_SET(bp->flag_hwrm, VALID_L2_FILTER); + bp->l2_filter_id = resp->l2_filter_id; + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_cfa_l2_filter_free(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_cfa_l2_filter_free_input); + struct hwrm_cfa_l2_filter_free_input *req; + int rc; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_L2_FILTER))) + return STATUS_SUCCESS; + + req = (struct hwrm_cfa_l2_filter_free_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_CFA_L2_FILTER_FREE, cmd_len); + req->l2_filter_id = bp->l2_filter_id; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_RESET(bp->flag_hwrm, VALID_L2_FILTER); + + return STATUS_SUCCESS; +} + +u32 bnxt_set_rx_mask(u32 rx_mask) +{ + u32 mask = 0; + + if (!rx_mask) + return mask; + mask = CFA_L2_SET_RX_MASK_REQ_MASK_BCAST; + if (rx_mask != RX_MASK_ACCEPT_NONE) { + if (rx_mask & RX_MASK_ACCEPT_MULTICAST) + mask |= CFA_L2_SET_RX_MASK_REQ_MASK_MCAST; + + if (rx_mask & RX_MASK_ACCEPT_ALL_MULTICAST) + mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST; + + if (rx_mask & RX_MASK_PROMISCUOUS_MODE) + mask |= CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS; + } + + return mask; +} + +static int bnxt_hwrm_set_rx_mask(struct bnxt *bp, u32 rx_mask) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_cfa_l2_set_rx_mask_input); + struct hwrm_cfa_l2_set_rx_mask_input *req; + u32 mask = bnxt_set_rx_mask(rx_mask); + + req = (struct hwrm_cfa_l2_set_rx_mask_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_CFA_L2_SET_RX_MASK, cmd_len); + req->vnic_id = bp->vnic_id; + req->mask = mask; + + return wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); +} + +static int bnxt_hwrm_port_mac_cfg(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_port_mac_cfg_input); + struct hwrm_port_mac_cfg_input *req; + + req = (struct hwrm_port_mac_cfg_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_PORT_MAC_CFG, cmd_len); + req->lpbk = PORT_MAC_CFG_REQ_LPBK_NONE; + + return wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); +} + +static int bnxt_hwrm_port_phy_qcfg(struct bnxt *bp, u16 idx) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_port_phy_qcfg_input); + struct hwrm_port_phy_qcfg_input *req; + struct hwrm_port_phy_qcfg_output *resp; + int rc; + + req = (struct hwrm_port_phy_qcfg_input *)bp->hwrm_addr_req; + resp = (struct hwrm_port_phy_qcfg_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_PORT_PHY_QCFG, cmd_len); + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + if (idx & SUPPORT_SPEEDS) + bp->support_speeds = resp->support_speeds; + + if (idx & DETECT_MEDIA) + bp->media_detect = resp->module_status; + + if (idx & PHY_SPEED) + bp->current_link_speed = resp->link_speed; + + if (idx & PHY_STATUS) { + if (resp->link == PORT_PHY_QCFG_RESP_LINK_LINK) + bp->link_status = STATUS_LINK_ACTIVE; + else + bp->link_status = STATUS_LINK_DOWN; + } + + return STATUS_SUCCESS; +} + +u16 set_link_speed_mask(u16 link_cap) +{ + u16 speed_mask = 0; + + if (link_cap & SPEED_CAPABILITY_DRV_100M) + speed_mask |= PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_100MB; + + if (link_cap & SPEED_CAPABILITY_DRV_1G) + speed_mask |= PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_1GB; + + if (link_cap & SPEED_CAPABILITY_DRV_10G) + speed_mask |= PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_10GB; + + if (link_cap & SPEED_CAPABILITY_DRV_25G) + speed_mask |= PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_25GB; + + if (link_cap & SPEED_CAPABILITY_DRV_40G) + speed_mask |= PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_40GB; + + if (link_cap & SPEED_CAPABILITY_DRV_50G) + speed_mask |= PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_50GB; + + if (link_cap & SPEED_CAPABILITY_DRV_100G) + speed_mask |= PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_100GB; + + return speed_mask; +} + +static int bnxt_hwrm_port_phy_cfg(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_port_phy_cfg_input); + struct hwrm_port_phy_cfg_input *req; + u32 flags; + u32 enables = 0; + u16 force_link_speed = 0; + u16 auto_link_speed_mask = 0; + u8 auto_mode = 0; + u8 auto_pause = 0; + u8 auto_duplex = 0; + + /* + * If multi_host or NPAR is set to TRUE, + * do not issue hwrm_port_phy_cfg + */ + if (FLAG_TEST(bp->flags, PORT_PHY_FLAGS)) { + dbg_flags(__func__, bp->flags); + return STATUS_SUCCESS; + } + + req = (struct hwrm_port_phy_cfg_input *)bp->hwrm_addr_req; + flags = PORT_PHY_CFG_REQ_FLAGS_FORCE | + PORT_PHY_CFG_REQ_FLAGS_RESET_PHY; + + switch (GET_MEDIUM_SPEED(bp->medium)) { + case MEDIUM_SPEED_1000MBPS: + force_link_speed = PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_1GB; + break; + case MEDIUM_SPEED_10GBPS: + force_link_speed = PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_10GB; + break; + case MEDIUM_SPEED_25GBPS: + force_link_speed = PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_25GB; + break; + case MEDIUM_SPEED_40GBPS: + force_link_speed = PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_40GB; + break; + case MEDIUM_SPEED_50GBPS: + force_link_speed = PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_50GB; + break; + case MEDIUM_SPEED_100GBPS: + force_link_speed = PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_100GB; + break; + default: + /* Enable AUTONEG by default */ + auto_mode = PORT_PHY_CFG_REQ_AUTO_MODE_SPEED_MASK; + flags &= ~PORT_PHY_CFG_REQ_FLAGS_FORCE; + enables |= PORT_PHY_CFG_REQ_ENABLES_AUTO_MODE | + PORT_PHY_CFG_REQ_ENABLES_AUTO_LINK_SPEED_MASK | + PORT_PHY_CFG_REQ_ENABLES_AUTO_DUPLEX | + PORT_PHY_CFG_REQ_ENABLES_AUTO_PAUSE; + auto_pause = PORT_PHY_CFG_REQ_AUTO_PAUSE_TX | + PORT_PHY_CFG_REQ_AUTO_PAUSE_RX; + auto_duplex = PORT_PHY_CFG_REQ_AUTO_DUPLEX_BOTH; + auto_link_speed_mask = bp->support_speeds; + break; + } + + hwrm_init(bp, (void *)req, (u16)HWRM_PORT_PHY_CFG, cmd_len); + req->flags = flags; + req->enables = enables; + req->port_id = bp->port_idx; + req->force_link_speed = force_link_speed; + req->auto_mode = auto_mode; + req->auto_duplex = auto_duplex; + req->auto_pause = auto_pause; + req->auto_link_speed_mask = auto_link_speed_mask; + + return wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); +} + +static int bnxt_qphy_link(struct bnxt *bp) +{ + u16 flag = QCFG_PHY_ALL; + + /* Query Link Status */ + if (bnxt_hwrm_port_phy_qcfg(bp, flag) != STATUS_SUCCESS) + return STATUS_FAILURE; + + if (bp->link_status != STATUS_LINK_ACTIVE) { + /* + * Configure link if it is not up. + * try to bring link up, but don't return + * failure if port_phy_cfg() fails + */ + bnxt_hwrm_port_phy_cfg(bp); + /* refresh link speed values after bringing link up */ + if (bnxt_hwrm_port_phy_qcfg(bp, flag) != STATUS_SUCCESS) + return STATUS_FAILURE; + } + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_stat_ctx_alloc(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_stat_ctx_alloc_input); + struct hwrm_stat_ctx_alloc_input *req; + struct hwrm_stat_ctx_alloc_output *resp; + int rc; + + req = (struct hwrm_stat_ctx_alloc_input *)bp->hwrm_addr_req; + resp = (struct hwrm_stat_ctx_alloc_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_STAT_CTX_ALLOC, cmd_len); + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_SET(bp->flag_hwrm, VALID_STAT_CTX); + bp->stat_ctx_id = (u16)resp->stat_ctx_id; + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_stat_ctx_free(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_stat_ctx_free_input); + struct hwrm_stat_ctx_free_input *req; + int rc; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_STAT_CTX))) + return STATUS_SUCCESS; + + req = (struct hwrm_stat_ctx_free_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_STAT_CTX_FREE, cmd_len); + req->stat_ctx_id = (u32)bp->stat_ctx_id; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_RESET(bp->flag_hwrm, VALID_STAT_CTX); + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_ring_free_grp(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_ring_grp_free_input); + struct hwrm_ring_grp_free_input *req; + int rc; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_RING_GRP))) + return STATUS_SUCCESS; + + req = (struct hwrm_ring_grp_free_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_RING_GRP_FREE, cmd_len); + req->ring_group_id = (u32)bp->ring_grp_id; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_RESET(bp->flag_hwrm, VALID_RING_GRP); + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_ring_alloc_grp(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_ring_grp_alloc_input); + struct hwrm_ring_grp_alloc_input *req; + struct hwrm_ring_grp_alloc_output *resp; + int rc; + + req = (struct hwrm_ring_grp_alloc_input *)bp->hwrm_addr_req; + resp = (struct hwrm_ring_grp_alloc_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_RING_GRP_ALLOC, cmd_len); + req->cr = bp->cq_ring_id; + req->rr = bp->rx_ring_id; + req->ar = (u16)HWRM_NA_SIGNATURE; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_SET(bp->flag_hwrm, VALID_RING_GRP); + bp->ring_grp_id = (u16)resp->ring_group_id; + + return STATUS_SUCCESS; +} + +int bnxt_hwrm_ring_free(struct bnxt *bp, u16 ring_id, u8 ring_type) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_ring_free_input); + struct hwrm_ring_free_input *req; + + req = (struct hwrm_ring_free_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_RING_FREE, cmd_len); + req->ring_type = ring_type; + req->ring_id = ring_id; + + return wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); +} + +static int bnxt_hwrm_ring_alloc(struct bnxt *bp, + dma_addr_t ring_map, + u16 length, + u16 ring_id, + u8 ring_type, + u8 int_mode) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_ring_alloc_input); + struct hwrm_ring_alloc_input *req; + struct hwrm_ring_alloc_output *resp; + int rc; + + req = (struct hwrm_ring_alloc_input *)bp->hwrm_addr_req; + resp = (struct hwrm_ring_alloc_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_RING_ALLOC, cmd_len); + req->ring_type = ring_type; + req->page_tbl_addr = ring_map; + req->page_size = LM_PAGE_SIZE; + req->length = (u32)length; + req->cmpl_ring_id = ring_id; + req->int_mode = int_mode; + if (ring_type == RING_ALLOC_REQ_RING_TYPE_TX) { + req->queue_id = TX_RING_QID; + } else if (ring_type == RING_ALLOC_REQ_RING_TYPE_RX) { + req->queue_id = RX_RING_QID; + req->enables = RING_ALLOC_REQ_ENABLES_RX_BUF_SIZE_VALID; + req->rx_buf_size = MAX_ETHERNET_PACKET_BUFFER_SIZE; + } + + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + if (ring_type == RING_ALLOC_REQ_RING_TYPE_L2_CMPL) { + FLAG_SET(bp->flag_hwrm, VALID_RING_CQ); + bp->cq_ring_id = resp->ring_id; + } else if (ring_type == RING_ALLOC_REQ_RING_TYPE_TX) { + FLAG_SET(bp->flag_hwrm, VALID_RING_TX); + bp->tx_ring_id = resp->ring_id; + } else if (ring_type == RING_ALLOC_REQ_RING_TYPE_RX) { + FLAG_SET(bp->flag_hwrm, VALID_RING_RX); + bp->rx_ring_id = resp->ring_id; + } + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_ring_alloc_cq(struct bnxt *bp) +{ + return bnxt_hwrm_ring_alloc(bp, + virt_to_bus(bp->cq.bd_virt), + bp->cq.ring_cnt, + 0, + RING_ALLOC_REQ_RING_TYPE_L2_CMPL, + BNXT_CQ_INTR_MODE()); +} + +static int bnxt_hwrm_ring_alloc_tx(struct bnxt *bp) +{ + return bnxt_hwrm_ring_alloc(bp, + virt_to_bus(bp->tx.bd_virt), + bp->tx.ring_cnt, bp->cq_ring_id, + RING_ALLOC_REQ_RING_TYPE_TX, + BNXT_INTR_MODE()); +} + +static int bnxt_hwrm_ring_alloc_rx(struct bnxt *bp) +{ + return bnxt_hwrm_ring_alloc(bp, + virt_to_bus(bp->rx.bd_virt), + bp->rx.ring_cnt, + bp->cq_ring_id, + RING_ALLOC_REQ_RING_TYPE_RX, + BNXT_INTR_MODE()); +} + +static int bnxt_hwrm_ring_free_cq(struct bnxt *bp) +{ + int ret = STATUS_SUCCESS; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_RING_CQ))) + return ret; + + ret = RING_FREE(bp, bp->cq_ring_id, RING_FREE_REQ_RING_TYPE_L2_CMPL); + if (ret == STATUS_SUCCESS) + FLAG_RESET(bp->flag_hwrm, VALID_RING_CQ); + + return ret; +} + +static int bnxt_hwrm_ring_free_tx(struct bnxt *bp) +{ + int ret = STATUS_SUCCESS; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_RING_TX))) + return ret; + + ret = RING_FREE(bp, bp->tx_ring_id, RING_FREE_REQ_RING_TYPE_TX); + if (ret == STATUS_SUCCESS) + FLAG_RESET(bp->flag_hwrm, VALID_RING_TX); + + return ret; +} + +static int bnxt_hwrm_ring_free_rx(struct bnxt *bp) +{ + int ret = STATUS_SUCCESS; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_RING_RX))) + return ret; + + ret = RING_FREE(bp, bp->rx_ring_id, RING_FREE_REQ_RING_TYPE_RX); + if (ret == STATUS_SUCCESS) + FLAG_RESET(bp->flag_hwrm, VALID_RING_RX); + + return ret; +} + +static int bnxt_hwrm_vnic_alloc(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_vnic_alloc_input); + struct hwrm_vnic_alloc_input *req; + struct hwrm_vnic_alloc_output *resp; + int rc; + + req = (struct hwrm_vnic_alloc_input *)bp->hwrm_addr_req; + resp = (struct hwrm_vnic_alloc_output *)bp->hwrm_addr_resp; + hwrm_init(bp, (void *)req, (u16)HWRM_VNIC_ALLOC, cmd_len); + req->flags = VNIC_ALLOC_REQ_FLAGS_DEFAULT; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_SET(bp->flag_hwrm, VALID_VNIC_ID); + bp->vnic_id = resp->vnic_id; + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_vnic_free(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_vnic_free_input); + struct hwrm_vnic_free_input *req; + int rc; + + if (!(FLAG_TEST(bp->flag_hwrm, VALID_VNIC_ID))) + return STATUS_SUCCESS; + + req = (struct hwrm_vnic_free_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_VNIC_FREE, cmd_len); + req->vnic_id = bp->vnic_id; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + if (rc) + return STATUS_FAILURE; + + FLAG_RESET(bp->flag_hwrm, VALID_VNIC_ID); + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_vnic_cfg(struct bnxt *bp) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_vnic_cfg_input); + struct hwrm_vnic_cfg_input *req; + + req = (struct hwrm_vnic_cfg_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_VNIC_CFG, cmd_len); + req->enables = VNIC_CFG_REQ_ENABLES_MRU; + req->mru = bp->mtu; + req->enables |= VNIC_CFG_REQ_ENABLES_DFLT_RING_GRP; + req->dflt_ring_grp = bp->ring_grp_id; + req->vnic_id = bp->vnic_id; + + return wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); +} + +static int set_phy_speed(struct bnxt *bp) +{ + char name[20]; + u16 flag = PHY_STATUS | PHY_SPEED | DETECT_MEDIA; + + /* Query Link Status */ + if (bnxt_hwrm_port_phy_qcfg(bp, flag) != STATUS_SUCCESS) + return STATUS_FAILURE; + + switch (bp->current_link_speed) { + case PORT_PHY_QCFG_RESP_LINK_SPEED_100GB: + sprintf(name, "%s %s", str_100, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_50GB: + sprintf(name, "%s %s", str_50, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_40GB: + sprintf(name, "%s %s", str_40, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_25GB: + sprintf(name, "%s %s", str_25, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_20GB: + sprintf(name, "%s %s", str_20, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_10GB: + sprintf(name, "%s %s", str_10, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_2_5GB: + sprintf(name, "%s %s", str_2_5, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_2GB: + sprintf(name, "%s %s", str_2, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_1GB: + sprintf(name, "%s %s", str_1, str_gbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_100MB: + sprintf(name, "%s %s", str_100, str_mbps); + break; + case PORT_PHY_QCFG_RESP_LINK_SPEED_10MB: + sprintf(name, "%s %s", str_10, str_mbps); + break; + default: + sprintf(name, "%s %x", str_unknown, bp->current_link_speed); + } + + dbg_phy_speed(bp, name); + + return STATUS_SUCCESS; +} + +static int set_phy_link(struct bnxt *bp, u32 tmo) +{ + int ret; + + set_phy_speed(bp); + dbg_link_status(bp); + ret = STATUS_FAILURE; + if (bp->link_status == STATUS_LINK_ACTIVE) { + dbg_link_state(bp, tmo); + ret = STATUS_SUCCESS; + } + + return ret; +} + +static int get_phy_link(struct bnxt *bp) +{ + u16 flag = PHY_STATUS | PHY_SPEED | DETECT_MEDIA; + + dbg_chip_info(bp); + /* Query Link Status */ + if (bnxt_hwrm_port_phy_qcfg(bp, flag) != STATUS_SUCCESS) + return STATUS_FAILURE; + + set_phy_link(bp, 100); + + return STATUS_SUCCESS; +} + +static int bnxt_hwrm_set_async_event(struct bnxt *bp) +{ + int rc; + u16 cmd_len = (u16)sizeof(struct hwrm_func_cfg_input); + struct hwrm_func_cfg_input *req; + + req = (struct hwrm_func_cfg_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_FUNC_CFG, cmd_len); + req->fid = (u16)HWRM_NA_SIGNATURE; + req->enables = FUNC_CFG_REQ_ENABLES_ASYNC_EVENT_CR; + req->async_event_cr = bp->cq_ring_id; + rc = wait_resp(bp, bp->hwrm_cmd_timeout, cmd_len, __func__); + + return rc; +} + +int bnxt_hwrm_get_nvmem(struct bnxt *bp, + u16 data_len, + u16 option_num, + u16 dimensions, + u16 index_0) +{ + u16 cmd_len = (u16)sizeof(struct hwrm_nvm_get_variable_input); + struct hwrm_nvm_get_variable_input *req; + + req = (struct hwrm_nvm_get_variable_input *)bp->hwrm_addr_req; + hwrm_init(bp, (void *)req, (u16)HWRM_NVM_GET_VARIABLE, cmd_len); + req->dest_data_addr = bp->data_addr_mapping; + req->data_len = data_len; + req->option_num = option_num; + req->dimensions = dimensions; + req->index_0 = index_0; + + return wait_resp(bp, + HWRM_CMD_FLASH_MULTIPLAYER(bp->hwrm_cmd_timeout), + cmd_len, + __func__); +} + +static void set_medium(struct bnxt *bp) +{ + switch (bp->link_set & LINK_SPEED_DRV_MASK) { + case LINK_SPEED_DRV_1G: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_1000MBPS); + break; + case LINK_SPEED_DRV_2_5G: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_2500MBPS); + break; + case LINK_SPEED_DRV_10G: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_10GBPS); + break; + case LINK_SPEED_DRV_25G: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_25GBPS); + break; + case LINK_SPEED_DRV_40G: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_40GBPS); + break; + case LINK_SPEED_DRV_50G: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_50GBPS); + break; + case LINK_SPEED_DRV_100G: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_100GBPS); + break; + case LINK_SPEED_DRV_200G: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_200GBPS); + break; + case LINK_SPEED_DRV_AUTONEG: + bp->medium = SET_MEDIUM_SPEED(bp, MEDIUM_SPEED_AUTONEG); + break; + default: + bp->medium = SET_MEDIUM_DUPLEX(bp, MEDIUM_FULL_DUPLEX); + break; + } +} + +static int bnxt_hwrm_get_link_speed(struct bnxt *bp) +{ + u32 *ptr32 = (u32 *)bp->hwrm_addr_data; + + if (bnxt_hwrm_get_nvmem(bp, + 4, + (u16)LINK_SPEED_DRV_NUM, + 1, + (u16)bp->port_idx) != STATUS_SUCCESS) + return STATUS_FAILURE; + + bp->link_set = *ptr32; + bp->link_set &= SPEED_DRV_MASK; + set_medium(bp); + + return STATUS_SUCCESS; +} + +typedef int (*hwrm_func_t)(struct bnxt *bp); + +hwrm_func_t down_chip[] = { + bnxt_hwrm_cfa_l2_filter_free, /* Free l2 filter */ + bnxt_free_rx_iob, /* Free rx iob */ + bnxt_hwrm_vnic_free, /* Free vnic */ + bnxt_hwrm_ring_free_grp, /* Free ring group */ + bnxt_hwrm_ring_free_rx, /* Free rx ring */ + bnxt_hwrm_ring_free_tx, /* Free tx ring */ + bnxt_hwrm_ring_free_cq, /* Free CQ ring */ + bnxt_hwrm_stat_ctx_free, /* Free Stat ctx */ + bnxt_hwrm_func_drv_unrgtr, /* unreg driver */ + NULL, +}; + +hwrm_func_t bring_chip[] = { + bnxt_hwrm_ver_get, /* HWRM_VER_GET */ + bnxt_hwrm_func_reset_req, /* HWRM_FUNC_RESET */ + bnxt_hwrm_func_drv_rgtr, /* HWRM_FUNC_DRV_RGTR */ + bnxt_hwrm_func_resource_qcaps, /* HWRM_FUNC_RESOURCE_QCAPS */ + bnxt_hwrm_func_qcfg_req, /* HWRM_FUNC_QCFG */ + bnxt_hwrm_func_qcaps_req, /* HWRM_FUNC_QCAPS */ + bnxt_hwrm_get_link_speed, /* HWRM_NVM_GET_VARIABLE - 203 */ + bnxt_hwrm_port_mac_cfg, /* HWRM_PORT_MAC_CFG */ + bnxt_qphy_link, /* HWRM_PORT_PHY_QCFG */ + bnxt_hwrm_func_cfg_req, /* HWRM_FUNC_CFG - ring resource*/ + bnxt_hwrm_stat_ctx_alloc, /* Allocate Stat Ctx ID */ + bnxt_hwrm_ring_alloc_cq, /* Allocate CQ Ring */ + bnxt_hwrm_ring_alloc_tx, /* Allocate Tx ring */ + bnxt_hwrm_ring_alloc_rx, /* Allocate Rx Ring */ + bnxt_hwrm_ring_alloc_grp, /* Create Ring Group */ + post_rx_buffers, /* Post RX buffers */ + bnxt_hwrm_set_async_event, /* ENABLES_ASYNC_EVENT_CR */ + bnxt_hwrm_vnic_alloc, /* Alloc VNIC */ + bnxt_hwrm_vnic_cfg, /* Config VNIC */ + bnxt_hwrm_cfa_l2_filter_alloc, /* Alloc L2 Filter */ + get_phy_link, /* Get Physical Link */ + NULL, +}; + +int bnxt_hwrm_run(hwrm_func_t cmds[], struct bnxt *bp, int flag) +{ + hwrm_func_t *ptr; + int ret; + int status = STATUS_SUCCESS; + + for (ptr = cmds; *ptr; ++ptr) { + ret = (*ptr)(bp); + if (ret) { + status = STATUS_FAILURE; + /* Continue till all cleanup routines are called */ + if (flag) + return STATUS_FAILURE; + } + } + + return status; +} + +/* Broadcom ethernet driver Network interface APIs. */ +static int bnxt_start(struct udevice *dev) +{ + struct bnxt *bp = dev_get_priv(dev); + + if (bnxt_hwrm_set_rx_mask(bp, RX_MASK) != STATUS_SUCCESS) + return STATUS_FAILURE; + + bp->card_en = true; + return STATUS_SUCCESS; +} + +static int bnxt_send(struct udevice *dev, void *packet, int length) +{ + struct bnxt *bp = dev_get_priv(dev); + int len; + u16 entry; + dma_addr_t mapping; + + if (bnxt_tx_avail(bp) < 1) { + dbg_no_tx_bd(); + return -ENOBUFS; + } + + entry = bp->tx.prod_id; + len = iob_pad(packet, length); + mapping = virt_to_bus(packet); + set_txq(bp, entry, mapping, len); + entry = NEXT_IDX(entry, bp->tx.ring_cnt); + dump_tx_pkt(packet, mapping, len); + bnxt_db_tx(bp, (u32)entry); + bp->tx.prod_id = entry; + bp->tx.cnt_req++; + bnxt_tx_complete(bp); + + return 0; +} + +static void bnxt_link_evt(struct bnxt *bp, struct cmpl_base *cmp) +{ + struct hwrm_async_event_cmpl *evt; + + evt = (struct hwrm_async_event_cmpl *)cmp; + switch (evt->event_id) { + case ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE: + if (evt->event_data1 & 0x01) + bp->link_status = STATUS_LINK_ACTIVE; + else + bp->link_status = STATUS_LINK_DOWN; + + set_phy_link(bp, 0); + break; + default: + break; + } +} + +static int bnxt_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct bnxt *bp = dev_get_priv(dev); + struct cmpl_base *cmp; + u16 old_cons_idx = bp->cq.cons_idx; + int done = SERVICE_NEXT_CQ_BD; + u32 cq_type; + + while (done == SERVICE_NEXT_CQ_BD) { + cmp = (struct cmpl_base *)BD_NOW(bp->cq.bd_virt, + bp->cq.cons_idx, + sizeof(struct cmpl_base)); + if ((cmp->info3_v & CMPL_BASE_V) ^ bp->cq.completion_bit) + break; + + cq_type = cmp->type & CMPL_BASE_TYPE_MASK; + dump_evt((u8 *)cmp, cq_type, bp->cq.cons_idx); + dump_CQ(cmp, bp->cq.cons_idx); + switch (cq_type) { + case CMPL_BASE_TYPE_HWRM_ASYNC_EVENT: + bnxt_link_evt(bp, cmp); + fallthrough; + case CMPL_BASE_TYPE_TX_L2: + case CMPL_BASE_TYPE_STAT_EJECT: + bnxt_adv_cq_index(bp, 1); + break; + case CMPL_BASE_TYPE_RX_L2: + done = bnxt_rx_complete(bp, (struct rx_pkt_cmpl *)cmp); + break; + default: + done = NO_MORE_CQ_BD_TO_SERVICE; + break; + } + } + + if (bp->cq.cons_idx != old_cons_idx) + bnxt_db_cq(bp); + + if (bp->rx.iob_recv == PKT_RECEIVED) { + *packetp = bp->rx.iob_rx; + return bp->rx.iob_len; + } + + return -EAGAIN; +} + +static void bnxt_stop(struct udevice *dev) +{ + struct bnxt *bp = dev_get_priv(dev); + + if (bp->card_en) { + bnxt_hwrm_set_rx_mask(bp, 0); + bp->card_en = false; + } +} + +static int bnxt_free_pkt(struct udevice *dev, uchar *packet, int length) +{ + struct bnxt *bp = dev_get_priv(dev); + + dbg_rx_pkt(bp, __func__, packet, length); + bp->rx.iob_recv = PKT_DONE; + bp->rx.iob_len = 0; + bp->rx.iob_rx = NULL; + + return 0; +} + +static int bnxt_read_rom_hwaddr(struct udevice *dev) +{ + struct eth_pdata *plat = dev_get_plat(dev); + struct bnxt *bp = dev_get_priv(dev); + + memcpy(plat->enetaddr, bp->mac_set, ETH_ALEN); + + return 0; +} + +static const struct eth_ops bnxt_eth_ops = { + .start = bnxt_start, + .send = bnxt_send, + .recv = bnxt_recv, + .stop = bnxt_stop, + .free_pkt = bnxt_free_pkt, + .read_rom_hwaddr = bnxt_read_rom_hwaddr, +}; + +static const struct udevice_id bnxt_eth_ids[] = { + { .compatible = "broadcom,nxe" }, + { } +}; + +static int bnxt_eth_bind(struct udevice *dev) +{ + char name[20]; + + sprintf(name, "bnxt_eth%u", dev_seq(dev)); + + return device_set_name(dev, name); +} + +static int bnxt_eth_probe(struct udevice *dev) +{ + struct bnxt *bp = dev_get_priv(dev); + int ret; + + ret = bnxt_alloc_mem(bp); + if (ret) { + printf("*** error: bnxt_alloc_mem failed! ***\n"); + return ret; + } + + bp->cardnum = dev_seq(dev); + bp->name = dev->name; + bp->pdev = (struct udevice *)dev; + + bnxt_bring_pci(bp); + + ret = bnxt_bring_chip(bp); + if (ret) { + printf("*** error: bnxt_bring_chip failed! ***\n"); + return -ENODATA; + } + + return 0; +} + +static int bnxt_eth_remove(struct udevice *dev) +{ + struct bnxt *bp = dev_get_priv(dev); + + bnxt_down_chip(bp); + bnxt_free_mem(bp); + + return 0; +} + +static struct pci_device_id bnxt_nics[] = { + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NXT_57320)}, + {} +}; + +U_BOOT_DRIVER(eth_bnxt) = { + .name = "eth_bnxt", + .id = UCLASS_ETH, + .of_match = bnxt_eth_ids, + .bind = bnxt_eth_bind, + .probe = bnxt_eth_probe, + .remove = bnxt_eth_remove, + .ops = &bnxt_eth_ops, + .priv_auto = sizeof(struct bnxt), + .plat_auto = sizeof(struct eth_pdata), + .flags = DM_FLAG_ACTIVE_DMA, +}; + +U_BOOT_PCI_DEVICE(eth_bnxt, bnxt_nics); diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h new file mode 100644 index 0000000..6c64827 --- /dev/null +++ b/drivers/net/bnxt/bnxt.h @@ -0,0 +1,390 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019-2021 Broadcom. + */ + +#ifndef _BNXT_H_ +#define _BNXT_H_ + +#include <pci.h> +#include <linux/if_ether.h> + +#include "bnxt_hsi.h" + +union dma_addr64_t { + dma_addr_t addr; + u64 as_u64; +}; + +#define DRIVER_VERSION_MAJOR 1 +#define DRIVER_VERSION_MINOR 0 +#define DRIVER_VERSION_UPDATE 0 + +/* Broadcom ethernet driver defines. */ +#define FLAG_SET(f, b) ((f) |= (b)) +#define FLAG_TEST(f, b) ((f) & (b)) +#define FLAG_RESET(f, b) ((f) &= ~(b)) +#define BNXT_FLAG_HWRM_SHORT_CMD_SUPP BIT(0) +#define BNXT_FLAG_HWRM_SHORT_CMD_REQ BIT(1) +#define BNXT_FLAG_RESOURCE_QCAPS_SUPPORT BIT(2) +#define BNXT_FLAG_MULTI_HOST BIT(3) +#define BNXT_FLAG_NPAR_MODE BIT(4) +/******************************************************************************* + * Status codes. + ******************************************************************************/ +#define STATUS_SUCCESS 0 +#define STATUS_FAILURE 1 +#define STATUS_LINK_ACTIVE 4 +#define STATUS_LINK_DOWN 5 +#define STATUS_TIMEOUT 0xffff +/******************************************************************************* + * Receive filter masks. + ******************************************************************************/ +#define RX_MASK_ACCEPT_NONE 0x0000 +#define RX_MASK_ACCEPT_MULTICAST 0x0002 +#define RX_MASK_ACCEPT_ALL_MULTICAST 0x0004 +#define RX_MASK_ACCEPT_BROADCAST 0x0008 +#define RX_MASK_PROMISCUOUS_MODE 0x10000 +/******************************************************************************* + * media speed. + ******************************************************************************/ +#define MEDIUM_SPEED_AUTONEG 0x0000L +#define MEDIUM_SPEED_1000MBPS 0x0300L +#define MEDIUM_SPEED_2500MBPS 0x0400L +#define MEDIUM_SPEED_10GBPS 0x0600L +#define MEDIUM_SPEED_25GBPS 0x0800L +#define MEDIUM_SPEED_40GBPS 0x0900L +#define MEDIUM_SPEED_50GBPS 0x0a00L +#define MEDIUM_SPEED_100GBPS 0x0b00L +#define MEDIUM_SPEED_200GBPS 0x0c00L +#define MEDIUM_SPEED_MASK 0xff00L +#define GET_MEDIUM_SPEED(m) ((m) & MEDIUM_SPEED_MASK) +#define SET_MEDIUM_SPEED(bp, s) (((bp)->medium & ~MEDIUM_SPEED_MASK) | (s)) +#define MEDIUM_UNKNOWN_DUPLEX 0x00000L +#define MEDIUM_FULL_DUPLEX 0x00000L +#define MEDIUM_HALF_DUPLEX 0x10000L +#define GET_MEDIUM_DUPLEX(m) ((m) & MEDIUM_HALF_DUPLEX) +#define SET_MEDIUM_DUPLEX(bp, d) (((bp)->medium & ~MEDIUM_HALF_DUPLEX) | (d)) +#define MEDIUM_SELECTIVE_AUTONEG 0x01000000L +#define GET_MEDIUM_AUTONEG_MODE(m) ((m) & 0xff000000L) +#define GRC_COM_CHAN_BASE 0 +#define GRC_COM_CHAN_TRIG 0x100 +#define HWRM_CMD_DEFAULT_TIMEOUT 500 /* in Miliseconds */ +#define HWRM_CMD_POLL_WAIT_TIME 100 /* In MicroeSconds */ +#define HWRM_CMD_DEFAULT_MULTIPLAYER(a) ((a) * 10) +#define HWRM_CMD_FLASH_MULTIPLAYER(a) ((a) * 100) +#define HWRM_CMD_FLASH_ERASE_MULTIPLAYER(a) ((a) * 1000) +#define MAX_ETHERNET_PACKET_BUFFER_SIZE 1536 +#define DEFAULT_NUMBER_OF_CMPL_RINGS 0x01 +#define DEFAULT_NUMBER_OF_TX_RINGS 0x01 +#define DEFAULT_NUMBER_OF_RX_RINGS 0x01 +#define DEFAULT_NUMBER_OF_RING_GRPS 0x01 +#define DEFAULT_NUMBER_OF_STAT_CTXS 0x01 +#define NUM_RX_BUFFERS 512 +#define MAX_RX_DESC_CNT 1024 +#define MAX_TX_DESC_CNT 512 +#define MAX_CQ_DESC_CNT 2048 +#define TX_RING_DMA_BUFFER_SIZE (MAX_TX_DESC_CNT * sizeof(struct tx_bd_short)) +#define RX_RING_DMA_BUFFER_SIZE \ + (MAX_RX_DESC_CNT * sizeof(struct rx_prod_pkt_bd)) +#define CQ_RING_DMA_BUFFER_SIZE (MAX_CQ_DESC_CNT * sizeof(struct cmpl_base)) +#define BNXT_DMA_ALIGNMENT 256 //64 +#define REQ_BUFFER_SIZE 1024 +#define RESP_BUFFER_SIZE 1024 +#define DMA_BUFFER_SIZE 1024 +#define LM_PAGE_BITS 8 +#define BNXT_RX_STD_DMA_SZ 1536 +#define NEXT_IDX(N, S) (((N) + 1) & ((S) - 1)) +#define BD_NOW(bd, entry, len) (&((u8 *)(bd))[(entry) * (len)]) +#define BNXT_CQ_INTR_MODE() RING_ALLOC_REQ_INT_MODE_POLL +#define BNXT_INTR_MODE() RING_ALLOC_REQ_INT_MODE_POLL +/* Set default link timeout period to 500 millseconds */ +#define LINK_DEFAULT_TIMEOUT 500 +#define RX_MASK \ + (RX_MASK_ACCEPT_BROADCAST | \ + RX_MASK_ACCEPT_ALL_MULTICAST | \ + RX_MASK_ACCEPT_MULTICAST) +#define TX_RING_QID ((u16)bp->port_idx * 10) +#define RX_RING_QID 0 +#define LM_PAGE_SIZE LM_PAGE_BITS +#define virt_to_bus(a) ((dma_addr_t)(a)) +#define REQ_BUF_SIZE_ALIGNED ALIGN(REQ_BUFFER_SIZE, BNXT_DMA_ALIGNMENT) +#define RESP_BUF_SIZE_ALIGNED ALIGN(RESP_BUFFER_SIZE, BNXT_DMA_ALIGNMENT) +#define DMA_BUF_SIZE_ALIGNED ALIGN(DMA_BUFFER_SIZE, BNXT_DMA_ALIGNMENT) +#define RX_STD_DMA_ALIGNED ALIGN(BNXT_RX_STD_DMA_SZ, BNXT_DMA_ALIGNMENT) +#define PCI_COMMAND_INTX_DISABLE 0x0400 /* Interrupt disable */ +#define TX_AVAIL(r) ((r) - 1) +#define NO_MORE_CQ_BD_TO_SERVICE 1 +#define SERVICE_NEXT_CQ_BD 0 +#define PHY_STATUS 0x0001 +#define PHY_SPEED 0x0002 +#define DETECT_MEDIA 0x0004 +#define SUPPORT_SPEEDS 0x0008 +#define str_1 "1" +#define str_2 "2" +#define str_2_5 "2.5" +#define str_10 "10" +#define str_20 "20" +#define str_25 "25" +#define str_40 "40" +#define str_50 "50" +#define str_100 "100" +#define str_gbps "Gbps" +#define str_mbps "Mbps" +#define str_unknown "Unknown" +/* Broadcom ethernet driver nvm defines. */ +/* nvm cfg 1 - MAC settings */ +#define FUNC_MAC_ADDR_NUM 1 +/* nvm cfg 203 - u32 link_settings */ +#define LINK_SPEED_DRV_NUM 203 +#define LINK_SPEED_DRV_MASK 0x0000000F +#define LINK_SPEED_DRV_SHIFT 0 +#define LINK_SPEED_DRV_AUTONEG 0x0 +#define LINK_SPEED_DRV_1G 0x1 +#define LINK_SPEED_DRV_10G 0x2 +#define LINK_SPEED_DRV_25G 0x3 +#define LINK_SPEED_DRV_40G 0x4 +#define LINK_SPEED_DRV_50G 0x5 +#define LINK_SPEED_DRV_100G 0x6 +#define LINK_SPEED_DRV_200G 0x7 +#define LINK_SPEED_DRV_2_5G 0xE +#define LINK_SPEED_DRV_100M 0xF +/* nvm cfg 201 - u32 speed_cap_mask */ +#define SPEED_CAPABILITY_DRV_1G 0x1 +#define SPEED_CAPABILITY_DRV_10G 0x2 +#define SPEED_CAPABILITY_DRV_25G 0x4 +#define SPEED_CAPABILITY_DRV_40G 0x8 +#define SPEED_CAPABILITY_DRV_50G 0x10 +#define SPEED_CAPABILITY_DRV_100G 0x20 +#define SPEED_CAPABILITY_DRV_100M 0x8000 +/* nvm cfg 202 */ +/* nvm cfg 205 */ +#define LINK_SPEED_FW_NUM 205 +/* nvm cfg 210 */ +/* nvm cfg 211 */ +/* nvm cfg 213 */ +#define SPEED_DRV_MASK LINK_SPEED_DRV_MASK +/****************************************************************************** + * Doorbell info. + *****************************************************************************/ +#define RX_DOORBELL_KEY_RX (0x1UL << 28) +#define TX_DOORBELL_KEY_TX (0x0UL << 28) + +#define CMPL_DOORBELL_IDX_VALID 0x4000000UL +#define CMPL_DOORBELL_KEY_CMPL (0x2UL << 28) + +/****************************************************************************** + * Transmit info. + *****************************************************************************/ +struct tx_bd_short { + u16 flags_type; +#define TX_BD_SHORT_TYPE_TX_BD_SHORT 0x0UL +#define TX_BD_SHORT_FLAGS_PACKET_END 0x40UL +#define TX_BD_SHORT_FLAGS_NO_CMPL 0x80UL +#define TX_BD_SHORT_FLAGS_BD_CNT_SFT 8 +#define TX_BD_SHORT_FLAGS_LHINT_LT512 (0x0UL << 13) +#define TX_BD_SHORT_FLAGS_LHINT_LT1K (0x1UL << 13) +#define TX_BD_SHORT_FLAGS_LHINT_LT2K (0x2UL << 13) +#define TX_BD_SHORT_FLAGS_LHINT_GTE2K (0x3UL << 13) +#define TX_BD_SHORT_FLAGS_COAL_NOW 0x8000UL + u16 len; + u32 opaque; + union dma_addr64_t dma; +}; + +struct lm_tx_info_t { + void *bd_virt; + u16 prod_id; /* Tx producer index. */ + u16 cons_id; + u16 ring_cnt; + u32 cnt; /* Tx statistics. */ + u32 cnt_req; +}; + +struct cmpl_base { + u16 type; +#define CMPL_BASE_TYPE_MASK 0x3fUL +#define CMPL_BASE_TYPE_TX_L2 0x0UL +#define CMPL_BASE_TYPE_RX_L2 0x11UL +#define CMPL_BASE_TYPE_STAT_EJECT 0x1aUL +#define CMPL_BASE_TYPE_HWRM_ASYNC_EVENT 0x2eUL + u16 info1; + u32 info2; + u32 info3_v; +#define CMPL_BASE_V 0x1UL + u32 info4; +}; + +struct lm_cmp_info_t { + void *bd_virt; + u16 cons_idx; + u16 ring_cnt; + u8 completion_bit; + u8 res[3]; +}; + +struct rx_pkt_cmpl { + u16 flags_type; + u16 len; + u32 opaque; + u8 agg_bufs_v1; + u8 rss_hash_type; + u8 payload_offset; + u8 unused1; + u32 rss_hash; +}; + +struct rx_pkt_cmpl_hi { + u32 flags2; + u32 metadata; + u16 errors_v2; +#define RX_PKT_CMPL_V2 0x1UL +#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + u16 cfa_code; + u32 reorder; +}; + +struct rx_prod_pkt_bd { + u16 flags_type; +#define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT 0x4UL + u16 len; + u32 opaque; + union dma_addr64_t dma; +}; + +struct lm_rx_info_t { + void *bd_virt; + void *iob[NUM_RX_BUFFERS]; + void *iob_rx; + u16 iob_len; + u16 iob_recv; + u16 iob_cnt; + u16 buf_cnt; /* Total Rx buffer descriptors. */ + u16 ring_cnt; + u16 cons_idx; /* Last processed consumer index. */ + u32 rx_cnt; + u32 rx_buf_cnt; + u32 err; + u32 crc; + u32 dropped; +}; + +#define VALID_DRIVER_REG 0x0001 +#define VALID_STAT_CTX 0x0002 +#define VALID_RING_CQ 0x0004 +#define VALID_RING_TX 0x0008 +#define VALID_RING_RX 0x0010 +#define VALID_RING_GRP 0x0020 +#define VALID_VNIC_ID 0x0040 +#define VALID_RX_IOB 0x0080 +#define VALID_L2_FILTER 0x0100 + +enum RX_FLAGS { + PKT_DONE = 0, + PKT_RECEIVED = 1, + PKT_DROPPED = 2, +}; + +struct bnxt { + struct udevice *pdev; + const char *name; + unsigned int cardnum; + void *hwrm_addr_req; + void *hwrm_addr_resp; + void *hwrm_addr_data; + dma_addr_t data_addr_mapping; + dma_addr_t req_addr_mapping; + dma_addr_t resp_addr_mapping; + struct lm_tx_info_t tx; /* Tx info. */ + struct lm_rx_info_t rx; /* Rx info. */ + struct lm_cmp_info_t cq; /* completion info. */ + u16 last_resp_code; + u16 seq_id; + u32 flag_hwrm; + u32 flags; + u16 vendor_id; + u16 device_id; + u16 subsystem_vendor; + u16 subsystem_device; + u16 cmd_reg; + u8 irq; + void __iomem *bar0; + void __iomem *bar1; + void __iomem *bar2; + u16 chip_num; + /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ + u32 chip_id; + u32 hwrm_cmd_timeout; + u16 hwrm_spec_code; + u16 hwrm_max_req_len; + u16 hwrm_max_ext_req_len; + u8 fw_maj; + u8 fw_min; + u8 fw_bld; + u8 fw_rsvd; + u8 mac_addr[ETH_ALEN]; /* HW MAC address */ + u8 mac_set[ETH_ALEN]; /* NVM Configured MAC */ + u16 fid; + u8 port_idx; + u8 ordinal_value; + u16 mtu; + u16 ring_grp_id; + u16 cq_ring_id; + u16 tx_ring_id; + u16 rx_ring_id; + u16 current_link_speed; + u16 link_status; + u16 wait_link_timeout; + u64 l2_filter_id; + u16 vnic_id; + u16 stat_ctx_id; + u32 medium; + u16 support_speeds; + u32 link_set; + u8 media_detect; + u8 media_change; + u16 max_vfs; + u16 vf_res_strategy; + u16 min_vnics; + u16 max_vnics; + u16 max_msix; + u16 min_hw_ring_grps; + u16 max_hw_ring_grps; + u16 min_tx_rings; + u16 max_tx_rings; + u16 min_rx_rings; + u16 max_rx_rings; + u16 min_cp_rings; + u16 max_cp_rings; + u16 min_rsscos_ctxs; + u16 max_rsscos_ctxs; + u16 min_l2_ctxs; + u16 max_l2_ctxs; + u16 min_stat_ctxs; + u16 max_stat_ctxs; + u16 num_cmpl_rings; + u16 num_tx_rings; + u16 num_rx_rings; + u16 num_stat_ctxs; + u16 num_hw_ring_grps; + bool card_en; +}; + +#define SHORT_CMD_SUPPORTED VER_GET_RESP_DEV_CAPS_CFG_SHORT_CMD_SUPPORTED +#define SHORT_CMD_REQUIRED VER_GET_RESP_DEV_CAPS_CFG_SHORT_CMD_REQUIRED +#define CQ_DOORBELL_KEY_IDX(a) \ + (CMPL_DOORBELL_KEY_CMPL | \ + CMPL_DOORBELL_IDX_VALID | \ + (u32)(a)) +#define TX_BD_FLAGS \ + (TX_BD_SHORT_TYPE_TX_BD_SHORT | \ + TX_BD_SHORT_FLAGS_NO_CMPL | \ + TX_BD_SHORT_FLAGS_COAL_NOW | \ + TX_BD_SHORT_FLAGS_PACKET_END | \ + (1 << TX_BD_SHORT_FLAGS_BD_CNT_SFT)) +#define MEM_HWRM_RESP memalign(BNXT_DMA_ALIGNMENT, RESP_BUF_SIZE_ALIGNED) +#define PORT_PHY_FLAGS (BNXT_FLAG_NPAR_MODE | BNXT_FLAG_MULTI_HOST) +#define RING_FREE(bp, rid, flag) bnxt_hwrm_ring_free(bp, rid, flag) +#define QCFG_PHY_ALL (SUPPORT_SPEEDS | DETECT_MEDIA | PHY_SPEED | PHY_STATUS) + +#endif /* _BNXT_H_ */ diff --git a/drivers/net/bnxt/bnxt_dbg.h b/drivers/net/bnxt/bnxt_dbg.h new file mode 100644 index 0000000..e9e9f6e --- /dev/null +++ b/drivers/net/bnxt/bnxt_dbg.h @@ -0,0 +1,536 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019-2021 Broadcom. + */ + +#ifndef _BXNT_DBG_H_ +#define _BXNT_DBG_H_ + +/* Adjust commented out lines below to enable debug. */ +/* #define DEBUG_PCI */ +/* #define DEBUG_MEMORY */ +/* #define DEBUG_LINK */ +/* #define DEBUG_CHIP */ +/* #define DEBUG_FAIL */ +/* #define DEBUG_HWRM_CMDS */ +/* #define DEBUG_HWRM_DUMP */ +/* #define DEBUG_CQ */ +/* #define DEBUG_CQ_DUMP */ +/* #define DEBUG_TX */ +/* #define DEBUG_TX_DUMP */ +/* #define DEBUG_RX */ +/* #define DEBUG_RX_DUMP */ + +#if \ + defined(DEBUG_PCI) || \ + defined(DEBUG_MEMORY) || \ + defined(DEBUG_LINK) || \ + defined(DEBUG_CHIP) || \ + defined(DEBUG_FAIL) || \ + defined(DEBUG_HWRM_CMDS) || \ + defined(DEBUG_HWRM_DUMP) || \ + defined(DEBUG_CQ) || \ + defined(DEBUG_CQ_DUMP) || \ + defined(DEBUG_TX) || \ + defined(DEBUG_TX_DUMP) || \ + defined(DEBUG_RX) || \ + defined(DEBUG_RX_DUMP) +#define DEBUG_DEFAULT +#endif + +#if defined(DEBUG_DEFAULT) +#define dbg_prn printf +#define MAX_CHAR_SIZE(a) (u32)((1 << (a)) - 1) +#define DISP_U8 0x00 +#define DISP_U16 0x01 +#define DISP_U32 0x02 +#define DISP_U64 0x03 + +void dumpmemory1(u8 *buffer, u32 length, u8 flag) +{ + u32 jj = 0; + u8 i, c; + + printf("\n %p:", buffer); + for (jj = 0; jj < 16; jj++) { + if (!(jj & MAX_CHAR_SIZE(flag))) + printf(" "); + if (jj < length) + printf("%02x", buffer[jj]); + else + printf(" "); + if ((jj & 0xF) == 0xF) { + printf(" "); + for (i = 0; i < 16; i++) { + if (i < length) { + c = buffer[jj + i - 15]; + if (c >= 0x20 && c < 0x7F) + ; + else + c = '.'; + printf("%c", c); + } + } + } + } +} + +void dump_mem(u8 *buffer, u32 length, u8 flag) +{ + u32 length16, remlen, jj; + + length16 = length & 0xFFFFFFF0; + remlen = length & 0xF; + for (jj = 0; jj < length16; jj += 16) + dumpmemory1((u8 *)&buffer[jj], 16, flag); + if (remlen) + dumpmemory1((u8 *)&buffer[length16], remlen, flag); + if (length16 || remlen) + printf("\n"); +} +#endif + +#if defined(DEBUG_PCI) +void dbg_pci(struct bnxt *bp, const char *func, u16 cmd_reg) +{ + printf("- %s()\n", func); + printf(" Vendor id : %04X\n", bp->vendor_id); + printf(" Device id : %04X\n", bp->device_id); + printf(" Irq : %d\n", bp->irq); + printf(" PCI Command Reg : %04X %04X\n", bp->cmd_reg, cmd_reg); + printf(" Sub Vendor id : %04X\n", bp->subsystem_vendor); + printf(" Sub Device id : %04X\n", bp->subsystem_device); + printf(" BAR (0) : %p\n", bp->bar0); + printf(" BAR (1) : %p\n", bp->bar1); + printf(" BAR (2) : %p\n", bp->bar2); +} +#else +#define dbg_pci(bp, func, creg) +#endif + +#if defined(DEBUG_MEMORY) +void dbg_mem(struct bnxt *bp, const char *func) +{ + printf("- %s()\n", func); + printf(" bp Addr : %p", bp); + printf(" Len %4d", (u16)sizeof(struct bnxt)); + printf(" phy %llx\n", virt_to_bus(bp)); + printf(" bp->hwrm_req_addr : %p", bp->hwrm_addr_req); + printf(" Len %4d", (u16)REQ_BUFFER_SIZE); + printf(" phy %llx\n", bp->req_addr_mapping); + printf(" bp->hwrm_resp_addr : %p", bp->hwrm_addr_resp); + printf(" Len %4d", (u16)RESP_BUFFER_SIZE); + printf(" phy %llx\n", bp->resp_addr_mapping); + printf(" bp->tx.bd_virt : %p", bp->tx.bd_virt); + printf(" Len %4d", (u16)TX_RING_DMA_BUFFER_SIZE); + printf(" phy %llx\n", virt_to_bus(bp->tx.bd_virt)); + printf(" bp->rx.bd_virt : %p", bp->rx.bd_virt); + printf(" Len %4d", (u16)RX_RING_DMA_BUFFER_SIZE); + printf(" phy %llx\n", virt_to_bus(bp->rx.bd_virt)); + printf(" bp->cq.bd_virt : %p", bp->cq.bd_virt); + printf(" Len %4d", (u16)CQ_RING_DMA_BUFFER_SIZE); + printf(" phy %llx\n", virt_to_bus(bp->cq.bd_virt)); +} +#else +#define dbg_mem(bp, func) +#endif + +#if defined(DEBUG_CHIP) +void print_fw_ver(struct hwrm_ver_get_output *resp, u32 tmo) +{ + if (resp->hwrm_intf_maj_8b < 1) { + dbg_prn(" HWRM interface %d.%d.%d is older than 1.0.0.\n", + resp->hwrm_intf_maj_8b, resp->hwrm_intf_min_8b, + resp->hwrm_intf_upd_8b); + dbg_prn(" Update FW with HWRM interface 1.0.0 or newer.\n"); + } + dbg_prn(" FW Version : %d.%d.%d.%d\n", + resp->hwrm_fw_maj_8b, resp->hwrm_fw_min_8b, + resp->hwrm_fw_bld_8b, resp->hwrm_fw_rsvd_8b); + printf(" cmd timeout : %d\n", tmo); +} + +void dbg_func_resource_qcaps(struct bnxt *bp) +{ + /* Ring Groups */ + printf(" min_hw_ring_grps : %d\n", bp->min_hw_ring_grps); + printf(" max_hw_ring_grps : %d\n", bp->max_hw_ring_grps); + /* TX Rings */ + printf(" min_tx_rings : %d\n", bp->min_tx_rings); + printf(" max_tx_rings : %d\n", bp->max_tx_rings); + /* RX Rings */ + printf(" min_rx_rings : %d\n", bp->min_rx_rings); + printf(" max_rx_rings : %d\n", bp->max_rx_rings); + /* Completion Rings */ + printf(" min_cq_rings : %d\n", bp->min_cp_rings); + printf(" max_cq_rings : %d\n", bp->max_cp_rings); + /* Statistic Contexts */ + printf(" min_stat_ctxs : %d\n", bp->min_stat_ctxs); + printf(" max_stat_ctxs : %d\n", bp->max_stat_ctxs); +} + +void print_func_qcaps(struct bnxt *bp) +{ + printf(" Port Number : %d\n", bp->port_idx); + printf(" fid : 0x%04x\n", bp->fid); + dbg_prn(" PF MAC : %02x:%02x:%02x:%02x:%02x:%02x\n", + bp->mac_addr[0], + bp->mac_addr[1], + bp->mac_addr[2], + bp->mac_addr[3], + bp->mac_addr[4], + bp->mac_addr[5]); +} + +void print_func_qcfg(struct bnxt *bp) +{ + printf(" ordinal_value : %d\n", bp->ordinal_value); + printf(" stat_ctx_id : %x\n", bp->stat_ctx_id); + dbg_prn(" FW MAC : %02x:%02x:%02x:%02x:%02x:%02x\n", + bp->mac_addr[0], + bp->mac_addr[1], + bp->mac_addr[2], + bp->mac_addr[3], + bp->mac_addr[4], + bp->mac_addr[5]); +} + +void dbg_set_speed(u32 speed) +{ + u32 speed1 = ((speed & LINK_SPEED_DRV_MASK) >> LINK_SPEED_DRV_SHIFT); + + printf(" Set Link Speed : "); + switch (speed & LINK_SPEED_DRV_MASK) { + case LINK_SPEED_DRV_1G: + printf("1 GBPS"); + break; + case LINK_SPEED_DRV_10G: + printf("10 GBPS"); + break; + case LINK_SPEED_DRV_25G: + printf("25 GBPS"); + break; + case LINK_SPEED_DRV_40G: + printf("40 GBPS"); + break; + case LINK_SPEED_DRV_50G: + printf("50 GBPS"); + break; + case LINK_SPEED_DRV_100G: + printf("100 GBPS"); + break; + case LINK_SPEED_DRV_AUTONEG: + printf("AUTONEG"); + break; + default: + printf("%x", speed1); + break; + } + printf("\n"); +} + +void dbg_chip_info(struct bnxt *bp) +{ + printf(" Stat Ctx ID : %d\n", bp->stat_ctx_id); + printf(" Grp ID : %d\n", bp->ring_grp_id); + printf(" CQ Ring Id : %d\n", bp->cq_ring_id); + printf(" Tx Ring Id : %d\n", bp->tx_ring_id); + printf(" Rx ring Id : %d\n", bp->rx_ring_id); +} + +void print_num_rings(struct bnxt *bp) +{ + printf(" num_cmpl_rings : %d\n", bp->num_cmpl_rings); + printf(" num_tx_rings : %d\n", bp->num_tx_rings); + printf(" num_rx_rings : %d\n", bp->num_rx_rings); + printf(" num_ring_grps : %d\n", bp->num_hw_ring_grps); + printf(" num_stat_ctxs : %d\n", bp->num_stat_ctxs); +} + +void dbg_flags(const char *func, u32 flags) +{ + printf("- %s()\n", func); + printf(" bp->flags : 0x%04x\n", flags); +} +#else +#define print_fw_ver(resp, tmo) +#define dbg_func_resource_qcaps(bp) +#define print_func_qcaps(bp) +#define print_func_qcfg(bp) +#define dbg_set_speed(speed) +#define dbg_chip_info(bp) +#define print_num_rings(bp) +#define dbg_flags(func, flags) +#endif + +#if defined(DEBUG_HWRM_CMDS) || defined(DEBUG_FAIL) +void dump_hwrm_req(struct bnxt *bp, const char *func, u32 len, u32 tmo) +{ + dbg_prn("- %s(0x%04x) cmd_len %d cmd_tmo %d", + func, (u16)((struct input *)bp->hwrm_addr_req)->req_type, + len, tmo); +#if defined(DEBUG_HWRM_DUMP) + dump_mem((u8 *)bp->hwrm_addr_req, len, DISP_U8); +#else + printf("\n"); +#endif +} + +void debug_resp(struct bnxt *bp, const char *func, u32 resp_len, u16 err) +{ + dbg_prn("- %s(0x%04x) - ", + func, (u16)((struct input *)bp->hwrm_addr_req)->req_type); + if (err == STATUS_SUCCESS) + printf("Done"); + else if (err != STATUS_TIMEOUT) + printf("Fail err 0x%04x", err); + else + printf("timedout"); +#if defined(DEBUG_HWRM_DUMP) + if (err != STATUS_TIMEOUT) + dump_mem((u8 *)bp->hwrm_addr_resp, resp_len, DISP_U8); + else + printf("\n"); +#else + printf("\n"); +#endif +} + +void dbg_hw_cmd(struct bnxt *bp, + const char *func, u16 cmd_len, + u16 resp_len, u32 cmd_tmo, u16 err) +{ +#if !defined(DEBUG_HWRM_CMDS) + if (err && err != STATUS_TIMEOUT) +#endif + { + dump_hwrm_req(bp, func, cmd_len, cmd_tmo); + debug_resp(bp, func, resp_len, err); + } +} +#else +#define dbg_hw_cmd(bp, func, cmd_len, resp_len, cmd_tmo, err) +#endif + +#if defined(DEBUG_HWRM_CMDS) +void dbg_short_cmd(u8 *req, const char *func, u32 len) +{ + struct hwrm_short_input *sreq; + + sreq = (struct hwrm_short_input *)req; + dbg_prn("- %s(0x%04x) short_cmd_len %d", + func, + sreq->req_type, + (int)len); +#if defined(DEBUG_HWRM_DUMP) + dump_mem((u8 *)sreq, len, DISP_U8); +#else + printf("\n"); +#endif +} +#else +#define dbg_short_cmd(sreq, func, len) +#endif + +#if defined(DEBUG_RX) +void dump_rx_bd(struct rx_pkt_cmpl *rx_cmp, + struct rx_pkt_cmpl_hi *rx_cmp_hi, + u32 desc_idx) +{ + printf(" RX desc_idx %d\n", desc_idx); + printf("- rx_cmp %llx", virt_to_bus(rx_cmp)); +#if defined(DEBUG_RX_DUMP) + dump_mem((u8 *)rx_cmp, (u32)sizeof(struct rx_pkt_cmpl), DISP_U8); +#else + printf("\n"); +#endif + printf("- rx_cmp_hi %llx", virt_to_bus(rx_cmp_hi)); +#if defined(DEBUG_RX_DUMP) + dump_mem((u8 *)rx_cmp_hi, (u32)sizeof(struct rx_pkt_cmpl_hi), DISP_U8); +#else + printf("\n"); +#endif +} + +void dbg_rxp(u8 *iob, u16 rx_len, u16 flag) +{ + printf("- RX iob %llx Len %d ", virt_to_bus(iob), rx_len); + if (flag == PKT_RECEIVED) + printf(" PKT RECEIVED"); + else if (flag == PKT_DROPPED) + printf(" PKT DROPPED"); +#if defined(DEBUG_RX_DUMP) + dump_mem(iob, (u32)rx_len, DISP_U8); +#else + printf("\n"); +#endif +} + +void dbg_rx_cid(u16 idx, u16 cid) +{ + dbg_prn("- RX old cid %d new cid %d\n", idx, cid); +} + +void dbg_rx_alloc_iob_fail(u16 idx, u16 cid) +{ + dbg_prn(" Rx alloc_iob (%d) failed", idx); + dbg_prn(" for cons_id %d\n", cid); +} + +void dbg_rx_iob(void *iob, u16 idx, u16 cid) +{ + dbg_prn(" Rx alloc_iob (%d) %p bd_virt (%d)\n", + idx, iob, cid); +} + +void dbg_rx_pkt(struct bnxt *bp, const char *func, uchar *pkt, int len) +{ + if (bp->rx.iob_recv == PKT_RECEIVED) { + dbg_prn("- %s: %llx %d\n", func, + virt_to_bus(pkt), len); + } +} +#else +#define dump_rx_bd(rx_cmp, rx_cmp_hi, desc_idx) +#define dbg_rxp(iob, rx_len, flag) +#define dbg_rx_cid(idx, cid) +#define dbg_rx_alloc_iob_fail(idx, cid) +#define dbg_rx_iob(iob, idx, cid) +#define dbg_rx_pkt(bp, func, pkt, len) +#endif + +#if defined(DEBUG_CQ) +void dump_CQ(struct cmpl_base *cmp, u16 cons_idx) +{ + printf("- CQ Type "); + + switch (cmp->type & CMPL_BASE_TYPE_MASK) { + case CMPL_BASE_TYPE_STAT_EJECT: + printf("(se)"); + break; + case CMPL_BASE_TYPE_HWRM_ASYNC_EVENT: + printf("(ae)"); + break; + case CMPL_BASE_TYPE_TX_L2: + printf("(tx)"); + break; + case CMPL_BASE_TYPE_RX_L2: + printf("(rx)"); + break; + default: + printf("%04x", (u16)(cmp->type & CMPL_BASE_TYPE_MASK)); + break; + } + printf(" cid %d", cons_idx); +#if defined(DEBUG_CQ_DUMP) + dump_mem((u8 *)cmp, (u32)sizeof(struct cmpl_base), DISP_U8); +#else + printf("\n"); +#endif +} +#else +#define dump_CQ(cq, id) +#endif + +#if defined(DEBUG_TX) +void dump_tx_stat(struct bnxt *bp) +{ + printf(" TX stats cnt %d req_cnt %d", bp->tx.cnt, bp->tx.cnt_req); + printf(" prod_id %d cons_id %d\n", bp->tx.prod_id, bp->tx.cons_id); +} + +void dump_tx_pkt(void *packet, dma_addr_t mapping, int len) +{ + printf(" TX Addr %llx Size %d", mapping, len); +#if defined(DEBUG_TX_DUMP) + dump_mem((u8 *)packet, len, DISP_U8); +#else + printf("\n"); +#endif +} + +void dump_tx_bd(struct tx_bd_short *tx_bd, u16 len) +{ + printf(" Tx BD Addr %llx Size %d", virt_to_bus(tx_bd), len); +#if defined(DEBUG_TX_DUMP) + dump_mem((u8 *)tx_bd, (u32)len, DISP_U8); +#else + printf("\n"); +#endif +} + +void dbg_no_tx_bd(void) +{ + printf(" Tx ring full\n"); +} +#else +#define dump_tx_stat(bp) +#define dump_tx_pkt(packet, mapping, len) +#define dump_tx_bd(prod_bd, len) +#define dbg_no_tx_bd() +#endif + +#if defined(DEBUG_MEMORY) +void dbg_mem_free_done(const char *func) +{ + printf("- %s - Done\n", func); +} +#else +#define dbg_mem_free_done(func) +#endif + +#if defined(DEBUG_FAIL) +void dbg_mem_alloc_fail(const char *func) +{ + printf("- %s() Fail\n", func); +} +#else +#define dbg_mem_alloc_fail(func) +#endif + +#if defined(DEBUG_LINK) +static void dump_evt(u8 *cmp, u32 type, u16 cid) +{ + u32 size = sizeof(struct cmpl_base); + u8 c = 'C'; + + switch (type) { + case CMPL_BASE_TYPE_HWRM_ASYNC_EVENT: + break; + default: + return; + } + dbg_prn("- %cQ Type (ae) cid %d", c, cid); + dump_mem(cmp, size, DISP_U8); +} + +void dbg_link_status(struct bnxt *bp) +{ + dbg_prn(" Port(%d) : Link", bp->port_idx); + if (bp->link_status == STATUS_LINK_ACTIVE) { + dbg_prn("Up"); + } else { + dbg_prn("Down\n"); + dbg_prn(" media_detect : %x", bp->media_detect); + } + dbg_prn("\n"); +} + +void dbg_link_state(struct bnxt *bp, u32 tmo) +{ + if (bp->link_status == STATUS_LINK_ACTIVE) + printf(" Link wait time : %d ms\n", tmo); +} + +void dbg_phy_speed(struct bnxt *bp, char *name) +{ + printf(" Current Speed : %s\n", name); +} +#else +#define dump_evt(cmp, ty, cid) +#define dbg_link_status(bp) +#define dbg_link_state(bp, tmo) +#define dbg_phy_speed(bp, name) +#endif + +#endif /* _BXNT_DBG_H_ */ diff --git a/drivers/net/bnxt/bnxt_hsi.h b/drivers/net/bnxt/bnxt_hsi.h new file mode 100644 index 0000000..81cc5da --- /dev/null +++ b/drivers/net/bnxt/bnxt_hsi.h @@ -0,0 +1,889 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + /* + * Copyright 2019-2021 Broadcom. + */ + +#ifndef _BNXT_HSI_H_ +#define _BNXT_HSI_H_ + +/* input (size:128b/16B) */ +struct input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; +}; + +/* output (size:64b/8B) */ +struct output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; +}; + +/* hwrm_short_input (size:128b/16B) */ +struct hwrm_short_input { + __le16 req_type; + __le16 signature; +#define SHORT_REQ_SIGNATURE_SHORT_CMD 0x4321UL + __le16 unused_0; + __le16 size; + __le64 req_addr; +}; + +#define HWRM_VER_GET 0x0UL +#define HWRM_FUNC_RESET 0x11UL +#define HWRM_FUNC_QCAPS 0x15UL +#define HWRM_FUNC_QCFG 0x16UL +#define HWRM_FUNC_CFG 0x17UL +#define HWRM_FUNC_DRV_UNRGTR 0x1aUL +#define HWRM_FUNC_DRV_RGTR 0x1dUL +#define HWRM_PORT_PHY_CFG 0x20UL +#define HWRM_PORT_MAC_CFG 0x21UL +#define HWRM_PORT_PHY_QCFG 0x27UL +#define HWRM_VNIC_ALLOC 0x40UL +#define HWRM_VNIC_FREE 0x41UL +#define HWRM_VNIC_CFG 0x42UL +#define HWRM_RING_ALLOC 0x50UL +#define HWRM_RING_FREE 0x51UL +#define HWRM_RING_GRP_ALLOC 0x60UL +#define HWRM_RING_GRP_FREE 0x61UL +#define HWRM_CFA_L2_FILTER_ALLOC 0x90UL +#define HWRM_CFA_L2_FILTER_FREE 0x91UL +#define HWRM_CFA_L2_SET_RX_MASK 0x93UL +#define HWRM_STAT_CTX_ALLOC 0xb0UL +#define HWRM_STAT_CTX_FREE 0xb1UL +#define HWRM_FUNC_RESOURCE_QCAPS 0x190UL +#define HWRM_NVM_FLUSH 0xfff0UL +#define HWRM_NVM_GET_VARIABLE 0xfff1UL +#define HWRM_NVM_SET_VARIABLE 0xfff2UL + +#define HWRM_NA_SIGNATURE ((__le32)(-1)) +#define HWRM_MAX_REQ_LEN 128 +#define HWRM_VERSION_MAJOR 1 +#define HWRM_VERSION_MINOR 10 +#define HWRM_VERSION_UPDATE 0 + +/* hwrm_ver_get_input (size:192b/24B) */ +struct hwrm_ver_get_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + u8 hwrm_intf_maj; + u8 hwrm_intf_min; + u8 hwrm_intf_upd; + u8 unused_0[5]; +}; + +/* hwrm_ver_get_output (size:1408b/176B) */ +struct hwrm_ver_get_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + u8 hwrm_intf_maj_8b; + u8 hwrm_intf_min_8b; + u8 hwrm_intf_upd_8b; + u8 hwrm_intf_rsvd_8b; + u8 hwrm_fw_maj_8b; + u8 hwrm_fw_min_8b; + u8 hwrm_fw_bld_8b; + u8 hwrm_fw_rsvd_8b; + u8 mgmt_fw_maj_8b; + u8 mgmt_fw_min_8b; + u8 mgmt_fw_bld_8b; + u8 mgmt_fw_rsvd_8b; + u8 netctrl_fw_maj_8b; + u8 netctrl_fw_min_8b; + u8 netctrl_fw_bld_8b; + u8 netctrl_fw_rsvd_8b; + __le32 dev_caps_cfg; +#define VER_GET_RESP_DEV_CAPS_CFG_SHORT_CMD_SUPPORTED 0x4UL +#define VER_GET_RESP_DEV_CAPS_CFG_SHORT_CMD_REQUIRED 0x8UL + u8 roce_fw_maj_8b; + u8 roce_fw_min_8b; + u8 roce_fw_bld_8b; + u8 roce_fw_rsvd_8b; + char hwrm_fw_name[16]; + char mgmt_fw_name[16]; + char netctrl_fw_name[16]; + u8 reserved2[16]; + char roce_fw_name[16]; + __le16 chip_num; + u8 chip_rev; + u8 chip_metal; + u8 chip_bond_id; + u8 chip_platform_type; + __le16 max_req_win_len; + __le16 max_resp_len; + __le16 def_req_timeout; + u8 flags; + u8 unused_0[2]; + u8 always_1; + __le16 hwrm_intf_major; + __le16 hwrm_intf_minor; + __le16 hwrm_intf_build; + __le16 hwrm_intf_patch; + __le16 hwrm_fw_major; + __le16 hwrm_fw_minor; + __le16 hwrm_fw_build; + __le16 hwrm_fw_patch; + __le16 mgmt_fw_major; + __le16 mgmt_fw_minor; + __le16 mgmt_fw_build; + __le16 mgmt_fw_patch; + __le16 netctrl_fw_major; + __le16 netctrl_fw_minor; + __le16 netctrl_fw_build; + __le16 netctrl_fw_patch; + __le16 roce_fw_major; + __le16 roce_fw_minor; + __le16 roce_fw_build; + __le16 roce_fw_patch; + __le16 max_ext_req_len; + u8 unused_1[5]; + u8 valid; +}; + +/* hwrm_async_event_cmpl (size:128b/16B) */ +struct hwrm_async_event_cmpl { + __le16 type; + __le16 event_id; +#define ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE 0x0UL + __le32 event_data2; + u8 opaque_v; + u8 timestamp_lo; + __le16 timestamp_hi; + __le32 event_data1; +}; + +/* hwrm_func_reset_input (size:192b/24B) */ +struct hwrm_func_reset_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 enables; + __le16 vf_id; + u8 func_reset_level; +#define FUNC_RESET_REQ_FUNC_RESET_LEVEL_RESETME 0x1UL + u8 unused_0; +}; + +/* hwrm_func_qcaps_input (size:192b/24B) */ +struct hwrm_func_qcaps_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le16 fid; + u8 unused_0[6]; +}; + +/* hwrm_func_qcaps_output (size:640b/80B) */ +struct hwrm_func_qcaps_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + __le16 fid; + __le16 port_id; + __le32 flags; + u8 mac_address[6]; + __le16 max_rsscos_ctx; + __le16 max_cmpl_rings; + __le16 max_tx_rings; + __le16 max_rx_rings; + __le16 max_l2_ctxs; + __le16 max_vnics; + __le16 first_vf_id; + __le16 max_vfs; + __le16 max_stat_ctx; + __le32 max_encap_records; + __le32 max_decap_records; + __le32 max_tx_em_flows; + __le32 max_tx_wm_flows; + __le32 max_rx_em_flows; + __le32 max_rx_wm_flows; + __le32 max_mcast_filters; + __le32 max_flow_id; + __le32 max_hw_ring_grps; + __le16 max_sp_tx_rings; + u8 unused_0; + u8 valid; +}; + +/* hwrm_func_qcfg_input (size:192b/24B) */ +struct hwrm_func_qcfg_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le16 fid; + u8 unused_0[6]; +}; + +/* hwrm_func_qcfg_output (size:704b/88B) */ +struct hwrm_func_qcfg_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + __le16 fid; + __le16 port_id; + __le16 vlan; + __le16 flags; +#define FUNC_QCFG_RESP_FLAGS_MULTI_HOST 0x20UL + u8 mac_address[6]; + __le16 pci_id; + __le16 alloc_rsscos_ctx; + __le16 alloc_cmpl_rings; + __le16 alloc_tx_rings; + __le16 alloc_rx_rings; + __le16 alloc_l2_ctx; + __le16 alloc_vnics; + __le16 mtu; + __le16 mru; + __le16 stat_ctx_id; + u8 port_partition_type; +#define FUNC_QCFG_RESP_PORT_PARTITION_TYPE_NPAR1_0 0x2UL + u8 port_pf_cnt; + __le16 dflt_vnic_id; + __le16 max_mtu_configured; + __le32 min_bw; + __le32 max_bw; + u8 evb_mode; + u8 options; + __le16 alloc_vfs; + __le32 alloc_mcast_filters; + __le32 alloc_hw_ring_grps; + __le16 alloc_sp_tx_rings; + __le16 alloc_stat_ctx; + __le16 alloc_msix; + __le16 registered_vfs; + u8 unused_1[3]; + u8 always_1; + __le32 reset_addr_poll; + u8 unused_2[3]; + u8 valid; +}; + +/* hwrm_func_cfg_input (size:704b/88B) */ +struct hwrm_func_cfg_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le16 fid; + __le16 num_msix; + __le32 flags; + __le32 enables; +#define FUNC_CFG_REQ_ENABLES_NUM_CMPL_RINGS 0x8UL +#define FUNC_CFG_REQ_ENABLES_NUM_TX_RINGS 0x10UL +#define FUNC_CFG_REQ_ENABLES_NUM_RX_RINGS 0x20UL +#define FUNC_CFG_REQ_ENABLES_NUM_STAT_CTXS 0x100UL +#define FUNC_CFG_REQ_ENABLES_ASYNC_EVENT_CR 0x4000UL +#define FUNC_CFG_REQ_ENABLES_NUM_HW_RING_GRPS 0x80000UL + __le16 mtu; + __le16 mru; + __le16 num_rsscos_ctxs; + __le16 num_cmpl_rings; + __le16 num_tx_rings; + __le16 num_rx_rings; + __le16 num_l2_ctxs; + __le16 num_vnics; + __le16 num_stat_ctxs; + __le16 num_hw_ring_grps; + u8 dflt_mac_addr[6]; + __le16 dflt_vlan; + __be32 dflt_ip_addr[4]; + __le32 min_bw; + __le32 max_bw; + __le16 async_event_cr; + u8 vlan_antispoof_mode; + u8 allowed_vlan_pris; + u8 evb_mode; + u8 options; + __le16 num_mcast_filters; +}; + +/* hwrm_func_drv_rgtr_input (size:896b/112B) */ +struct hwrm_func_drv_rgtr_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 flags; + __le32 enables; +#define FUNC_DRV_RGTR_REQ_ENABLES_OS_TYPE 0x1UL +#define FUNC_DRV_RGTR_REQ_ENABLES_VER 0x2UL +#define FUNC_DRV_RGTR_REQ_ENABLES_ASYNC_EVENT_FWD 0x10UL + __le16 os_type; +#define FUNC_DRV_RGTR_REQ_OS_TYPE_OTHER 0x1UL + u8 ver_maj_8b; + u8 ver_min_8b; + u8 ver_upd_8b; + u8 unused_0[3]; + __le32 timestamp; + u8 unused_1[4]; + __le32 vf_req_fwd[8]; + __le32 async_event_fwd[8]; + __le16 ver_maj; + __le16 ver_min; + __le16 ver_upd; + __le16 ver_patch; +}; + +/* hwrm_func_drv_unrgtr_input (size:192b/24B) */ +struct hwrm_func_drv_unrgtr_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 flags; +#define FUNC_DRV_UNRGTR_REQ_FLAGS_PREPARE_FOR_SHUTDOWN 0x1UL + u8 unused_0[4]; +}; + +/* hwrm_func_resource_qcaps_input (size:192b/24B) */ +struct hwrm_func_resource_qcaps_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le16 fid; + u8 unused_0[6]; +}; + +/* hwrm_func_resource_qcaps_output (size:448b/56B) */ +struct hwrm_func_resource_qcaps_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + __le16 max_vfs; + __le16 max_msix; + __le16 vf_reservation_strategy; + __le16 min_rsscos_ctx; + __le16 max_rsscos_ctx; + __le16 min_cmpl_rings; + __le16 max_cmpl_rings; + __le16 min_tx_rings; + __le16 max_tx_rings; + __le16 min_rx_rings; + __le16 max_rx_rings; + __le16 min_l2_ctxs; + __le16 max_l2_ctxs; + __le16 min_vnics; + __le16 max_vnics; + __le16 min_stat_ctx; + __le16 max_stat_ctx; + __le16 min_hw_ring_grps; + __le16 max_hw_ring_grps; + __le16 max_tx_scheduler_inputs; + __le16 flags; + u8 unused_0[5]; + u8 valid; +}; + +/* hwrm_func_vlan_qcfg_input (size:192b/24B) */ +struct hwrm_func_vlan_qcfg_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le16 fid; + u8 unused_0[6]; +}; + +/* hwrm_port_phy_cfg_input (size:448b/56B) */ +struct hwrm_port_phy_cfg_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 flags; +#define PORT_PHY_CFG_REQ_FLAGS_RESET_PHY 0x1UL +#define PORT_PHY_CFG_REQ_FLAGS_FORCE 0x4UL + __le32 enables; +#define PORT_PHY_CFG_REQ_ENABLES_AUTO_MODE 0x1UL +#define PORT_PHY_CFG_REQ_ENABLES_AUTO_DUPLEX 0x2UL +#define PORT_PHY_CFG_REQ_ENABLES_AUTO_PAUSE 0x4UL +#define PORT_PHY_CFG_REQ_ENABLES_AUTO_LINK_SPEED_MASK 0x10UL + __le16 port_id; + __le16 force_link_speed; +#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_1GB 0xaUL +#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_10GB 0x64UL +#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_25GB 0xfaUL +#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_40GB 0x190UL +#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_50GB 0x1f4UL +#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_100GB 0x3e8UL + u8 auto_mode; +#define PORT_PHY_CFG_REQ_AUTO_MODE_SPEED_MASK 0x4UL + u8 auto_duplex; +#define PORT_PHY_CFG_REQ_AUTO_DUPLEX_BOTH 0x2UL + u8 auto_pause; +#define PORT_PHY_CFG_REQ_AUTO_PAUSE_TX 0x1UL +#define PORT_PHY_CFG_REQ_AUTO_PAUSE_RX 0x2UL + u8 unused_0; + __le16 auto_link_speed; + __le16 auto_link_speed_mask; +#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_100MB 0x2UL +#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_1GB 0x8UL +#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_10GB 0x40UL +#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_25GB 0x100UL +#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_40GB 0x200UL +#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_50GB 0x400UL +#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_100GB 0x800UL + u8 wirespeed; + u8 lpbk; + u8 force_pause; + u8 unused_1; + __le32 preemphasis; + __le16 eee_link_speed_mask; + u8 unused_2[2]; + __le32 tx_lpi_timer; + __le32 unused_3; +}; + +/* hwrm_port_phy_qcfg_input (size:192b/24B) */ +struct hwrm_port_phy_qcfg_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le16 port_id; + u8 unused_0[6]; +}; + +/* hwrm_port_phy_qcfg_output (size:768b/96B) */ +struct hwrm_port_phy_qcfg_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + u8 link; +#define PORT_PHY_QCFG_RESP_LINK_LINK 0x2UL + u8 unused_0; + __le16 link_speed; +#define PORT_PHY_QCFG_RESP_LINK_SPEED_100MB 0x1UL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_1GB 0xaUL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_2GB 0x14UL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_2_5GB 0x19UL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_10GB 0x64UL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_20GB 0xc8UL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_25GB 0xfaUL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_40GB 0x190UL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_50GB 0x1f4UL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_100GB 0x3e8UL +#define PORT_PHY_QCFG_RESP_LINK_SPEED_10MB 0xffffUL + u8 duplex_cfg; + u8 pause; + __le16 support_speeds; +#define PORT_QCFG_SUPPORT_SPEEDS_100MBHD 0x1UL +#define PORT_QCFG_SUPPORT_SPEEDS_100MB 0x2UL +#define PORT_QCFG_SUPPORT_SPEEDS_1GBHD 0x4UL +#define PORT_QCFG_SUPPORT_SPEEDS_1GB 0x8UL +#define PORT_QCFG_SUPPORT_SPEEDS_2GB 0x10UL +#define PORT_QCFG_SUPPORT_SPEEDS_2_5GB 0x20UL +#define PORT_QCFG_SUPPORT_SPEEDS_10GB 0x40UL +#define PORT_QCFG_SUPPORT_SPEEDS_20GB 0x80UL +#define PORT_QCFG_SUPPORT_SPEEDS_25GB 0x100UL +#define PORT_QCFG_SUPPORT_SPEEDS_50GB 0x400UL +#define PORT_QCFG_SUPPORT_SPEEDS_100GB 0x800UL +#define PORT_QCFG_SUPPORT_SPEEDS_200GB 0x4000UL + __le16 force_link_speed; + u8 auto_mode; + u8 auto_pause; + __le16 auto_link_speed; + __le16 auto_link_speed_mask; + u8 wirespeed; + u8 lpbk; + u8 force_pause; + u8 module_status; + __le32 preemphasis; + u8 phy_maj; + u8 phy_min; + u8 phy_bld; + u8 phy_type; + u8 media_type; + u8 xcvr_pkg_type; + u8 eee_config_phy_addr; + u8 parallel_detect; + __le16 link_partner_adv_speeds; + u8 link_partner_adv_auto_mode; + u8 link_partner_adv_pause; + __le16 adv_eee_link_speed_mask; + __le16 link_partner_adv_eee_link_speed_mask; + __le32 xcvr_identifier_type_tx_lpi_timer; + __le16 fec_cfg; + u8 duplex_state; + u8 option_flags; + char phy_vendor_name[16]; + char phy_vendor_partnumber[16]; + u8 unused_2[7]; + u8 valid; +}; + +/* hwrm_port_mac_cfg_input (size:320b/40B) */ +struct hwrm_port_mac_cfg_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 flags; + __le32 enables; + __le16 port_id; + u8 ipg; + u8 lpbk; +#define PORT_MAC_CFG_REQ_LPBK_NONE 0x0UL + u8 vlan_pri2cos_map_pri; + u8 reserved1; + u8 tunnel_pri2cos_map_pri; + u8 dscp2pri_map_pri; + __le16 rx_ts_capture_ptp_msg_type; + __le16 tx_ts_capture_ptp_msg_type; + u8 cos_field_cfg; + u8 unused_0[3]; +}; + +/* hwrm_vnic_alloc_input (size:192b/24B) */ +struct hwrm_vnic_alloc_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 flags; +#define VNIC_ALLOC_REQ_FLAGS_DEFAULT 0x1UL + u8 unused_0[4]; +}; + +/* hwrm_vnic_alloc_output (size:128b/16B) */ +struct hwrm_vnic_alloc_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + __le32 vnic_id; + u8 unused_0[3]; + u8 valid; +}; + +/* hwrm_vnic_free_input (size:192b/24B) */ +struct hwrm_vnic_free_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 vnic_id; + u8 unused_0[4]; +}; + +/* hwrm_vnic_cfg_input (size:320b/40B) */ +struct hwrm_vnic_cfg_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 flags; + __le32 enables; +#define VNIC_CFG_REQ_ENABLES_DFLT_RING_GRP 0x1UL +#define VNIC_CFG_REQ_ENABLES_MRU 0x10UL + __le16 vnic_id; + __le16 dflt_ring_grp; + __le16 rss_rule; + __le16 cos_rule; + __le16 lb_rule; + __le16 mru; + __le16 default_rx_ring_id; + __le16 default_cmpl_ring_id; +}; + +/* hwrm_ring_alloc_input (size:704b/88B) */ +struct hwrm_ring_alloc_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 enables; +#define RING_ALLOC_REQ_ENABLES_RX_BUF_SIZE_VALID 0x100UL + u8 ring_type; +#define RING_ALLOC_REQ_RING_TYPE_L2_CMPL 0x0UL +#define RING_ALLOC_REQ_RING_TYPE_TX 0x1UL +#define RING_ALLOC_REQ_RING_TYPE_RX 0x2UL + u8 unused_0; + __le16 flags; + __le64 page_tbl_addr; + __le32 fbo; + u8 page_size; + u8 page_tbl_depth; + u8 unused_1[2]; + __le32 length; + __le16 logical_id; + __le16 cmpl_ring_id; + __le16 queue_id; + __le16 rx_buf_size; + __le16 rx_ring_id; + __le16 nq_ring_id; + __le16 ring_arb_cfg; + __le16 unused_3; + __le32 reserved3; + __le32 stat_ctx_id; + __le32 reserved4; + __le32 max_bw; + u8 int_mode; +#define RING_ALLOC_REQ_INT_MODE_POLL 0x3UL + u8 unused_4[3]; + __le64 cq_handle; +}; + +/* hwrm_ring_alloc_output (size:128b/16B) */ +struct hwrm_ring_alloc_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + __le16 ring_id; + __le16 logical_ring_id; + u8 unused_0[3]; + u8 valid; +}; + +/* hwrm_ring_free_input (size:192b/24B) */ +struct hwrm_ring_free_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + u8 ring_type; +#define RING_FREE_REQ_RING_TYPE_L2_CMPL 0x0UL +#define RING_FREE_REQ_RING_TYPE_TX 0x1UL +#define RING_FREE_REQ_RING_TYPE_RX 0x2UL + u8 unused_0; + __le16 ring_id; + u8 unused_1[4]; +}; + +/* hwrm_ring_grp_alloc_input (size:192b/24B) */ +struct hwrm_ring_grp_alloc_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le16 cr; + __le16 rr; + __le16 ar; + __le16 sc; +}; + +/* hwrm_ring_grp_alloc_output (size:128b/16B) */ +struct hwrm_ring_grp_alloc_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + __le32 ring_group_id; + u8 unused_0[3]; + u8 valid; +}; + +/* hwrm_ring_grp_free_input (size:192b/24B) */ +struct hwrm_ring_grp_free_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 ring_group_id; + u8 unused_0[4]; +}; + +/* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */ +struct hwrm_cfa_l2_filter_alloc_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 flags; +#define CFA_L2_FILTER_ALLOC_REQ_FLAGS_PATH_RX 0x1UL + __le32 enables; +#define CFA_L2_FILTER_ALLOC_REQ_ENABLES_L2_ADDR 0x1UL +#define CFA_L2_FILTER_ALLOC_REQ_ENABLES_L2_ADDR_MASK 0x2UL +#define CFA_L2_FILTER_ALLOC_REQ_ENABLES_DST_ID 0x8000UL + u8 l2_addr[6]; + u8 unused_0[2]; + u8 l2_addr_mask[6]; + __le16 l2_ovlan; + __le16 l2_ovlan_mask; + __le16 l2_ivlan; + __le16 l2_ivlan_mask; + u8 unused_1[2]; + u8 t_l2_addr[6]; + u8 unused_2[2]; + u8 t_l2_addr_mask[6]; + __le16 t_l2_ovlan; + __le16 t_l2_ovlan_mask; + __le16 t_l2_ivlan; + __le16 t_l2_ivlan_mask; + u8 src_type; +#define CFA_L2_FILTER_ALLOC_REQ_SRC_TYPE_NPORT 0x0UL + u8 unused_3; + __le32 src_id; + u8 tunnel_type; + u8 unused_4; + __le16 dst_id; + __le16 mirror_vnic_id; + u8 pri_hint; + u8 unused_5; + __le32 unused_6; + __le64 l2_filter_id_hint; +}; + +/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */ +struct hwrm_cfa_l2_filter_alloc_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + __le64 l2_filter_id; + __le32 flow_id; + u8 unused_0[3]; + u8 valid; +}; + +/* hwrm_cfa_l2_filter_free_input (size:192b/24B) */ +struct hwrm_cfa_l2_filter_free_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le64 l2_filter_id; +}; + +/* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */ +struct hwrm_cfa_l2_set_rx_mask_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 vnic_id; + __le32 mask; +#define CFA_L2_SET_RX_MASK_REQ_MASK_MCAST 0x2UL +#define CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST 0x4UL +#define CFA_L2_SET_RX_MASK_REQ_MASK_BCAST 0x8UL +#define CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS 0x10UL + __le64 mc_tbl_addr; + __le32 num_mc_entries; + u8 unused_0[4]; + __le64 vlan_tag_tbl_addr; + __le32 num_vlan_tags; + u8 unused_1[4]; +}; + +/* hwrm_stat_ctx_alloc_input (size:256b/32B) */ +struct hwrm_stat_ctx_alloc_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le64 stats_dma_addr; + __le32 update_period_ms; + u8 stat_ctx_flags; + u8 unused_0[3]; +}; + +/* hwrm_stat_ctx_alloc_output (size:128b/16B) */ +struct hwrm_stat_ctx_alloc_output { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + __le32 stat_ctx_id; + u8 unused_0[3]; + u8 valid; +}; + +/* hwrm_stat_ctx_free_input (size:192b/24B) */ +struct hwrm_stat_ctx_free_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le32 stat_ctx_id; + u8 unused_0[4]; +}; + +/* hwrm_nvm_flush_input (size:128b/16B) */ +struct hwrm_nvm_flush_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; +}; + +/* hwrm_nvm_get_variable_input (size:320b/40B) */ +struct hwrm_nvm_get_variable_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le64 dest_data_addr; + __le16 data_len; + __le16 option_num; + __le16 dimensions; + __le16 index_0; + __le16 index_1; + __le16 index_2; + __le16 index_3; + u8 flags; + u8 unused_0; +}; + +/* hwrm_nvm_set_variable_input (size:320b/40B) */ +struct hwrm_nvm_set_variable_input { + __le16 req_type; + __le16 cmpl_ring; + __le16 seq_id; + __le16 target_id; + __le64 resp_addr; + __le64 src_data_addr; + __le16 data_len; + __le16 option_num; + __le16 dimensions; + __le16 index_0; + __le16 index_1; + __le16 index_2; + __le16 index_3; + u8 flags; + u8 unused_0; +}; + +#endif /* _BNXT_HSI_H_ */ diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 1c0d0e5..48faa33 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -272,7 +272,7 @@ struct fec_priv { struct clk clk_ref; struct clk clk_ptp; u32 clk_rate; - char promisc; + bool promisc; }; /** diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 7d51be1..f825612 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -387,8 +387,8 @@ int fm_init_common(int index, struct ccsr_fman *reg) struct udevice *new; /* speed and mode will be read from DT */ - ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, - CONFIG_ENV_SPI_CS, 0, 0, &new); + ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, + CONFIG_SF_DEFAULT_CS, 0, 0, &new); ucode_flash = dev_get_uclass_priv(new); #else @@ -474,7 +474,7 @@ int fm_init_common(int index, struct ccsr_fman *reg) struct udevice *new; /* speed and mode will be read from DT */ - ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, + ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS, 0, 0, &new); ucode_flash = dev_get_uclass_priv(new); diff --git a/drivers/net/mscc_eswitch/felix_switch.c b/drivers/net/mscc_eswitch/felix_switch.c index 551fc2c..60b2e8f 100644 --- a/drivers/net/mscc_eswitch/felix_switch.c +++ b/drivers/net/mscc_eswitch/felix_switch.c @@ -16,6 +16,7 @@ */ #include <dm/device_compat.h> +#include <dm/of_extra.h> #include <linux/delay.h> #include <net/dsa.h> #include <asm/io.h> @@ -39,7 +40,9 @@ #define FELIX_IS2 0x060000 #define FELIX_GMII(port) (0x100000 + (port) * 0x10000) #define FELIX_QSYS 0x200000 - +#define FELIX_DEVCPU_GCB 0x070000 +#define FELIX_DEVCPU_GCB_SOFT_RST (FELIX_DEVCPU_GCB + 0x00000004) +#define SOFT_SWC_RST BIT(0) #define FELIX_SYS_SYSTEM (FELIX_SYS + 0x00000E00) #define FELIX_SYS_SYSTEM_EN BIT(0) #define FELIX_SYS_RAM_CTRL (FELIX_SYS + 0x00000F24) @@ -210,17 +213,14 @@ static int felix_init_sxgmii(struct mii_dev *imdio, int pidx) static void felix_start_pcs(struct udevice *dev, int port, struct phy_device *phy, struct mii_dev *imdio) { - bool autoneg = true; - - if (phy->phy_id == PHY_FIXED_ID || - phy->interface == PHY_INTERFACE_MODE_2500BASEX) - autoneg = false; + ofnode node = dsa_port_get_ofnode(dev, port); + bool inband_an = ofnode_eth_uses_inband_aneg(node); switch (phy->interface) { case PHY_INTERFACE_MODE_SGMII: case PHY_INTERFACE_MODE_2500BASEX: case PHY_INTERFACE_MODE_QSGMII: - felix_init_sgmii(imdio, port, autoneg); + felix_init_sgmii(imdio, port, inband_an); break; case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_USXGMII: @@ -239,6 +239,15 @@ static void felix_init(struct udevice *dev) void *base = priv->regs_base; int timeout = 100; + /* Switch core reset */ + out_le32(base + FELIX_DEVCPU_GCB_SOFT_RST, SOFT_SWC_RST); + while (in_le32(base + FELIX_DEVCPU_GCB_SOFT_RST) & SOFT_SWC_RST && + --timeout) + udelay(10); + if (in_le32(base + FELIX_DEVCPU_GCB_SOFT_RST) & SOFT_SWC_RST) + dev_err(dev, "Timeout waiting for switch core reset\n"); + timeout = 100; + /* Init core memories */ out_le32(base + FELIX_SYS_RAM_CTRL, FELIX_SYS_RAM_CTRL_INIT); while (in_le32(base + FELIX_SYS_RAM_CTRL) & FELIX_SYS_RAM_CTRL_INIT && diff --git a/drivers/net/pfe_eth/Kconfig b/drivers/net/pfe_eth/Kconfig index a13b331..b2724ee 100644 --- a/drivers/net/pfe_eth/Kconfig +++ b/drivers/net/pfe_eth/Kconfig @@ -9,4 +9,20 @@ config SYS_FSL_PFE_ADDR hex "PFE base address" default 0x04000000 +config SYS_FSL_PFE_SPI_BUS + int "Value of SPI flash bus for PFE firmware" + default SF_DEFAULT_BUS + +config SYS_FSL_PFE_SPI_CS + int "Value of SPI flash chip select for PFE firmware" + default SF_DEFAULT_CS + +config SYS_FSL_PFE_SPI_MAX_HZ + int "Value of SPI flash max frequency for PFE firmware" + default SF_DEFAULT_SPEED + +config SYS_FSL_PFE_SPI_MODE + hex "Value of SPI flash work mode for PFE firmware" + default SF_DEFAULT_MODE + endif diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c index ad5bc3c..93e5ea5 100644 --- a/drivers/net/pfe_eth/pfe_firmware.c +++ b/drivers/net/pfe_eth/pfe_firmware.c @@ -179,10 +179,10 @@ int pfe_spi_flash_init(void) if (!addr) return -ENOMEM; - ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, - CONFIG_ENV_SPI_CS, - CONFIG_ENV_SPI_MAX_HZ, - CONFIG_ENV_SPI_MODE, + ret = spi_flash_probe_bus_cs(CONFIG_SYS_FSL_PFE_SPI_BUS, + CONFIG_SYS_FSL_PFE_SPI_CS, + CONFIG_SYS_FSL_PFE_SPI_MAX_HZ, + CONFIG_SYS_FSL_PFE_SPI_MODE, &new); if (ret) { printf("SF: failed to probe spi\n"); diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 68ee7d7..e69cd8a 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -214,16 +214,6 @@ config PHY_NXP_C45_TJA11XX config PHY_REALTEK bool "Realtek Ethernet PHYs support" -config RTL8211E_PINE64_GIGABIT_FIX - bool "Fix gigabit throughput on some Pine64+ models" - depends on PHY_REALTEK - help - Configure the Realtek RTL8211E found on some Pine64+ models differently to - fix throughput on Gigabit links, turning off all internal delays in the - process. The settings that this touches are not documented in the CONFREG - section of the RTL8211E datasheet, but come from Realtek by way of the - Pine64 engineering team. - config RTL8211X_PHY_FORCE_MASTER bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode" depends on PHY_REALTEK diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c index 2ac0295..778d93e 100644 --- a/drivers/net/phy/cortina.c +++ b/drivers/net/phy/cortina.c @@ -159,8 +159,8 @@ void cs4340_upload_firmware(struct phy_device *phydev) struct spi_flash *ucode_flash; addr = malloc(CONFIG_CORTINA_FW_LENGTH); - ucode_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, - CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + ucode_flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS, + CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE); if (!ucode_flash) { puts("SF: probe for Cortina ucode failed\n"); } else { @@ -212,8 +212,8 @@ void cs4340_upload_firmware(struct phy_device *phydev) struct spi_flash *ucode_flash; addr = malloc(CONFIG_CORTINA_FW_LENGTH); - ucode_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, - CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + ucode_flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS, + CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE); if (!ucode_flash) { puts("SF: probe for Cortina ucode failed\n"); } else { diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index d1a643c..f9482b2 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -19,6 +19,7 @@ /* Microsemi PHY ID's */ #define PHY_ID_VSC8530 0x00070560 #define PHY_ID_VSC8531 0x00070570 +#define PHY_ID_VSC8502 0x00070630 #define PHY_ID_VSC8540 0x00070760 #define PHY_ID_VSC8541 0x00070770 #define PHY_ID_VSC8574 0x000704a0 @@ -1513,6 +1514,50 @@ static int vsc8584_config(struct phy_device *phydev) return vsc8584_config_init(phydev); } +static int vsc8502_config(struct phy_device *phydev) +{ + bool rgmii_rx_delay = false, rgmii_tx_delay = false; + u16 reg = 0; + int ret; + + /* Assume nothing needs to be done for the default GMII/MII mode */ + if (!phy_interface_is_rgmii(phydev)) + return 0; + + /* Set Extended PHY Control 1 register to RGMII */ + phy_write(phydev, MDIO_DEVAD_NONE, MSCC_PHY_EXT_PHY_CNTL_1_REG, + BIT(13) | BIT(12)); + + /* Soft reset required after changing PHY mode from the default + * of GMII/MII + */ + ret = mscc_phy_soft_reset(phydev); + if (ret) + return ret; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + rgmii_rx_delay = true; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + rgmii_tx_delay = true; + + phy_write(phydev, MDIO_DEVAD_NONE, MSCC_EXT_PAGE_ACCESS, + MSCC_PHY_PAGE_EXT2); + + if (rgmii_rx_delay) + reg |= VSC_PHY_RGMII_DELAY_2000_PS << RGMII_RX_CLK_DELAY_POS; + if (rgmii_tx_delay) + reg |= VSC_PHY_RGMII_DELAY_2000_PS << RGMII_TX_CLK_DELAY_POS; + + phy_write(phydev, MDIO_DEVAD_NONE, MSCC_PHY_RGMII_CNTL_REG, reg); + + phy_write(phydev, MDIO_DEVAD_NONE, MSCC_EXT_PAGE_ACCESS, + MSCC_PHY_PAGE_STD); + + return 0; +} + static struct phy_driver VSC8530_driver = { .name = "Microsemi VSC8530", .uid = PHY_ID_VSC8530, @@ -1533,6 +1578,16 @@ static struct phy_driver VSC8531_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver VSC8502_driver = { + .name = "Microsemi VSC8502", + .uid = PHY_ID_VSC8502, + .mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .config = &vsc8502_config, + .startup = &mscc_startup, + .shutdown = &genphy_shutdown, +}; + static struct phy_driver VSC8540_driver = { .name = "Microsemi VSC8540", .uid = PHY_ID_VSC8540, @@ -1577,6 +1632,7 @@ int phy_mscc_init(void) { phy_register(&VSC8530_driver); phy_register(&VSC8531_driver); + phy_register(&VSC8502_driver); phy_register(&VSC8540_driver); phy_register(&VSC8541_driver); phy_register(&VSC8574_driver); diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index b1b1fa5..24c3ea5 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -12,7 +12,6 @@ #include <linux/delay.h> #define PHY_RTL8211x_FORCE_MASTER BIT(1) -#define PHY_RTL8211E_PINE64_GIGABIT_FIX BIT(2) #define PHY_RTL8211F_FORCE_EEE_RXC_ON BIT(3) #define PHY_RTL8201F_S700_RMII_TIMINGS BIT(4) @@ -49,10 +48,10 @@ #define MIIM_RTL8211F_PHYSTAT_SPDDONE 0x0800 #define MIIM_RTL8211F_PHYSTAT_LINK 0x0004 -#define MIIM_RTL8211E_CONFREG 0x1c -#define MIIM_RTL8211E_CONFREG_TXD 0x0002 -#define MIIM_RTL8211E_CONFREG_RXD 0x0004 -#define MIIM_RTL8211E_CONFREG_MAGIC 0xb400 /* Undocumented */ +#define MIIM_RTL8211E_CONFREG 0x1c +#define MIIM_RTL8211E_CTRL_DELAY BIT(13) +#define MIIM_RTL8211E_TX_DELAY BIT(12) +#define MIIM_RTL8211E_RX_DELAY BIT(11) #define MIIM_RTL8211E_EXT_PAGE_SELECT 0x1e @@ -108,10 +107,6 @@ static int rtl8211b_probe(struct phy_device *phydev) static int rtl8211e_probe(struct phy_device *phydev) { -#ifdef CONFIG_RTL8211E_PINE64_GIGABIT_FIX - phydev->flags |= PHY_RTL8211E_PINE64_GIGABIT_FIX; -#endif - return 0; } @@ -154,22 +149,6 @@ static int rtl8211x_config(struct phy_device *phydev) reg |= MIIM_RTL8211x_CTRL1000T_MASTER; phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg); } - if (phydev->flags & PHY_RTL8211E_PINE64_GIGABIT_FIX) { - unsigned int reg; - - phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, - 7); - phy_write(phydev, MDIO_DEVAD_NONE, - MIIM_RTL8211E_EXT_PAGE_SELECT, 0xa4); - reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG); - /* Ensure both internal delays are turned off */ - reg &= ~(MIIM_RTL8211E_CONFREG_TXD | MIIM_RTL8211E_CONFREG_RXD); - /* Flip the magic undocumented bits */ - reg |= MIIM_RTL8211E_CONFREG_MAGIC; - phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG, reg); - phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, - 0); - } /* read interrupt status just to clear it */ phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER); @@ -201,6 +180,44 @@ static int rtl8201f_config(struct phy_device *phydev) return 0; } +static int rtl8211e_config(struct phy_device *phydev) +{ + int reg, val; + + /* enable TX/RX delay for rgmii-* modes, and disable them for rgmii. */ + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + val = MIIM_RTL8211E_CTRL_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + val = MIIM_RTL8211E_CTRL_DELAY | MIIM_RTL8211E_TX_DELAY | + MIIM_RTL8211E_RX_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + val = MIIM_RTL8211E_CTRL_DELAY | MIIM_RTL8211E_RX_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + val = MIIM_RTL8211E_CTRL_DELAY | MIIM_RTL8211E_TX_DELAY; + break; + default: /* the rest of the modes imply leaving delays as is. */ + goto default_delay; + } + + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, 7); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_EXT_PAGE_SELECT, 0xa4); + + reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG); + reg &= ~(MIIM_RTL8211E_TX_DELAY | MIIM_RTL8211E_RX_DELAY); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG, reg | val); + + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, 0); + +default_delay: + genphy_config_aneg(phydev); + + return 0; +} + static int rtl8211f_config(struct phy_device *phydev) { u16 reg; @@ -410,7 +427,7 @@ static struct phy_driver RTL8211E_driver = { .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .probe = &rtl8211e_probe, - .config = &rtl8211x_config, + .config = &rtl8211e_config, .startup = &rtl8211e_startup, .shutdown = &genphy_shutdown, }; diff --git a/drivers/net/sja1105.c b/drivers/net/sja1105.c new file mode 100644 index 0000000..17bab33 --- /dev/null +++ b/drivers/net/sja1105.c @@ -0,0 +1,3376 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2016-2018 NXP + * Copyright 2018, Sensor-Technik Wiedemann GmbH + * Copyright 2018-2019, Vladimir Oltean <olteanv@gmail.com> + * Copyright 2020-2021 NXP + * + * Ported from Linux (drivers/net/dsa/sja1105/). + */ + +#include <common.h> +#include <dm/device_compat.h> +#include <linux/bitops.h> +#include <linux/bitrev.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/if_ether.h> +#include <linux/if_vlan.h> +#include <linux/types.h> +#include <net/dsa.h> +#include <stdlib.h> +#include <spi.h> +#include <miiphy.h> +#include <dm/of_extra.h> + +enum packing_op { + PACK, + UNPACK, +}; + +#define ETHER_CRC32_POLY 0x04C11DB7 +#define ETH_P_SJA1105 0xdadb +#define SJA1105_NUM_PORTS 5 +#define SJA1110_NUM_PORTS 11 +#define SJA1105_MAX_NUM_PORTS SJA1110_NUM_PORTS +#define SJA1105_NUM_TC 8 +#define SJA1105ET_FDB_BIN_SIZE 4 +#define SJA1105_SIZE_CGU_CMD 4 +#define SJA1105_SIZE_RESET_CMD 4 +#define SJA1105_SIZE_MDIO_CMD 4 +#define SJA1105_SIZE_SPI_MSG_HEADER 4 +#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4) +#define SJA1105_SIZE_DEVICE_ID 4 +#define SJA1105_SIZE_TABLE_HEADER 12 +#define SJA1105_SIZE_L2_POLICING_ENTRY 8 +#define SJA1105_SIZE_VLAN_LOOKUP_ENTRY 8 +#define SJA1110_SIZE_VLAN_LOOKUP_ENTRY 12 +#define SJA1105_SIZE_L2_FORWARDING_ENTRY 8 +#define SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY 12 +#define SJA1105_SIZE_XMII_PARAMS_ENTRY 4 +#define SJA1110_SIZE_XMII_PARAMS_ENTRY 8 +#define SJA1105ET_SIZE_MAC_CONFIG_ENTRY 28 +#define SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY 40 +#define SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY 32 +#define SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY 44 +#define SJA1110_SIZE_GENERAL_PARAMS_ENTRY 56 + +#define SJA1105_MAX_L2_LOOKUP_COUNT 1024 +#define SJA1105_MAX_L2_POLICING_COUNT 45 +#define SJA1110_MAX_L2_POLICING_COUNT 110 +#define SJA1105_MAX_VLAN_LOOKUP_COUNT 4096 +#define SJA1105_MAX_L2_FORWARDING_COUNT 13 +#define SJA1110_MAX_L2_FORWARDING_COUNT 19 +#define SJA1105_MAX_MAC_CONFIG_COUNT 5 +#define SJA1110_MAX_MAC_CONFIG_COUNT 11 +#define SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT 1 +#define SJA1105_MAX_GENERAL_PARAMS_COUNT 1 +#define SJA1105_MAX_XMII_PARAMS_COUNT 1 + +#define SJA1105_MAX_FRAME_MEMORY 929 + +#define SJA1105E_DEVICE_ID 0x9C00000Cull +#define SJA1105T_DEVICE_ID 0x9E00030Eull +#define SJA1105PR_DEVICE_ID 0xAF00030Eull +#define SJA1105QS_DEVICE_ID 0xAE00030Eull +#define SJA1110_DEVICE_ID 0xB700030Full + +#define SJA1105ET_PART_NO 0x9A83 +#define SJA1105P_PART_NO 0x9A84 +#define SJA1105Q_PART_NO 0x9A85 +#define SJA1105R_PART_NO 0x9A86 +#define SJA1105S_PART_NO 0x9A87 +#define SJA1110A_PART_NO 0x1110 +#define SJA1110B_PART_NO 0x1111 +#define SJA1110C_PART_NO 0x1112 +#define SJA1110D_PART_NO 0x1113 + +#define SJA1110_ACU 0x1c4400 +#define SJA1110_RGU 0x1c6000 +#define SJA1110_CGU 0x1c6400 + +#define SJA1110_SPI_ADDR(x) ((x) / 4) +#define SJA1110_ACU_ADDR(x) (SJA1110_ACU + SJA1110_SPI_ADDR(x)) +#define SJA1110_CGU_ADDR(x) (SJA1110_CGU + SJA1110_SPI_ADDR(x)) +#define SJA1110_RGU_ADDR(x) (SJA1110_RGU + SJA1110_SPI_ADDR(x)) + +#define SJA1105_RSV_ADDR 0xffffffffffffffffull + +#define SJA1110_PCS_BANK_REG SJA1110_SPI_ADDR(0x3fc) + +#define DSA_8021Q_DIR_TX BIT(11) +#define DSA_8021Q_PORT_SHIFT 0 +#define DSA_8021Q_PORT_MASK GENMASK(3, 0) +#define DSA_8021Q_PORT(x) (((x) << DSA_8021Q_PORT_SHIFT) & \ + DSA_8021Q_PORT_MASK) + +#define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000) + +/* XPCS registers */ + +/* VR MII MMD registers offsets */ +#define DW_VR_MII_DIG_CTRL1 0x8000 +#define DW_VR_MII_AN_CTRL 0x8001 +#define DW_VR_MII_DIG_CTRL2 0x80e1 + +/* VR_MII_DIG_CTRL1 */ +#define DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW BIT(9) + +/* VR_MII_DIG_CTRL2 */ +#define DW_VR_MII_DIG_CTRL2_TX_POL_INV BIT(4) + +/* VR_MII_AN_CTRL */ +#define DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT 3 +#define DW_VR_MII_TX_CONFIG_MASK BIT(3) +#define DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII 0x0 +#define DW_VR_MII_AN_CTRL_PCS_MODE_SHIFT 1 +#define DW_VR_MII_PCS_MODE_MASK GENMASK(2, 1) +#define DW_VR_MII_PCS_MODE_C37_SGMII 0x2 + +/* PMA registers */ + +/* LANE_DRIVER1_0 register */ +#define SJA1110_LANE_DRIVER1_0 0x8038 +#define SJA1110_TXDRV(x) (((x) << 12) & GENMASK(14, 12)) + +/* LANE_DRIVER2_0 register */ +#define SJA1110_LANE_DRIVER2_0 0x803a +#define SJA1110_TXDRVTRIM_LSB(x) ((x) & GENMASK_ULL(15, 0)) + +/* LANE_DRIVER2_1 register */ +#define SJA1110_LANE_DRIVER2_1 0x803b +#define SJA1110_LANE_DRIVER2_1_RSV BIT(9) +#define SJA1110_TXDRVTRIM_MSB(x) (((x) & GENMASK_ULL(23, 16)) >> 16) + +/* LANE_TRIM register */ +#define SJA1110_LANE_TRIM 0x8040 +#define SJA1110_TXTEN BIT(11) +#define SJA1110_TXRTRIM(x) (((x) << 8) & GENMASK(10, 8)) +#define SJA1110_TXPLL_BWSEL BIT(7) +#define SJA1110_RXTEN BIT(6) +#define SJA1110_RXRTRIM(x) (((x) << 3) & GENMASK(5, 3)) +#define SJA1110_CDR_GAIN BIT(2) +#define SJA1110_ACCOUPLE_RXVCM_EN BIT(0) + +/* LANE_DATAPATH_1 register */ +#define SJA1110_LANE_DATAPATH_1 0x8037 + +/* POWERDOWN_ENABLE register */ +#define SJA1110_POWERDOWN_ENABLE 0x8041 +#define SJA1110_TXPLL_PD BIT(12) +#define SJA1110_TXPD BIT(11) +#define SJA1110_RXPKDETEN BIT(10) +#define SJA1110_RXCH_PD BIT(9) +#define SJA1110_RXBIAS_PD BIT(8) +#define SJA1110_RESET_SER_EN BIT(7) +#define SJA1110_RESET_SER BIT(6) +#define SJA1110_RESET_DES BIT(5) +#define SJA1110_RCVEN BIT(4) + +/* RXPLL_CTRL0 register */ +#define SJA1110_RXPLL_CTRL0 0x8065 +#define SJA1110_RXPLL_FBDIV(x) (((x) << 2) & GENMASK(9, 2)) + +/* RXPLL_CTRL1 register */ +#define SJA1110_RXPLL_CTRL1 0x8066 +#define SJA1110_RXPLL_REFDIV(x) ((x) & GENMASK(4, 0)) + +/* TXPLL_CTRL0 register */ +#define SJA1110_TXPLL_CTRL0 0x806d +#define SJA1110_TXPLL_FBDIV(x) ((x) & GENMASK(11, 0)) + +/* TXPLL_CTRL1 register */ +#define SJA1110_TXPLL_CTRL1 0x806e +#define SJA1110_TXPLL_REFDIV(x) ((x) & GENMASK(5, 0)) + +/* RX_DATA_DETECT register */ +#define SJA1110_RX_DATA_DETECT 0x8045 + +/* RX_CDR_CTLE register */ +#define SJA1110_RX_CDR_CTLE 0x8042 + +/* UM10944.pdf Page 11, Table 2. Configuration Blocks */ +enum { + BLKID_L2_POLICING = 0x06, + BLKID_VLAN_LOOKUP = 0x07, + BLKID_L2_FORWARDING = 0x08, + BLKID_MAC_CONFIG = 0x09, + BLKID_L2_FORWARDING_PARAMS = 0x0E, + BLKID_GENERAL_PARAMS = 0x11, + BLKID_XMII_PARAMS = 0x4E, +}; + +enum sja1105_blk_idx { + BLK_IDX_L2_POLICING = 0, + BLK_IDX_VLAN_LOOKUP, + BLK_IDX_L2_FORWARDING, + BLK_IDX_MAC_CONFIG, + BLK_IDX_L2_FORWARDING_PARAMS, + BLK_IDX_GENERAL_PARAMS, + BLK_IDX_XMII_PARAMS, + BLK_IDX_MAX, +}; + +struct sja1105_general_params_entry { + u64 mac_fltres1; + u64 mac_fltres0; + u64 mac_flt1; + u64 mac_flt0; + u64 casc_port; + u64 host_port; + u64 mirr_port; + u64 tpid; + u64 tpid2; +}; + +struct sja1105_vlan_lookup_entry { + u64 vmemb_port; + u64 vlan_bc; + u64 tag_port; + u64 vlanid; + u64 type_entry; /* SJA1110 only */ +}; + +struct sja1105_l2_forwarding_entry { + u64 bc_domain; + u64 reach_port; + u64 fl_domain; +}; + +struct sja1105_l2_forwarding_params_entry { + u64 part_spc[SJA1105_NUM_TC]; +}; + +struct sja1105_l2_policing_entry { + u64 sharindx; + u64 smax; + u64 rate; + u64 maxlen; + u64 partition; +}; + +struct sja1105_mac_config_entry { + u64 top[SJA1105_NUM_TC]; + u64 base[SJA1105_NUM_TC]; + u64 enabled[SJA1105_NUM_TC]; + u64 speed; + u64 vlanid; + u64 egress; + u64 ingress; +}; + +struct sja1105_xmii_params_entry { + u64 phy_mac[SJA1105_MAX_NUM_PORTS]; + u64 xmii_mode[SJA1105_MAX_NUM_PORTS]; + u64 special[SJA1105_MAX_NUM_PORTS]; +}; + +struct sja1105_table_header { + u64 block_id; + u64 len; + u64 crc; +}; + +struct sja1105_table_ops { + size_t (*packing)(void *buf, void *entry_ptr, enum packing_op op); + size_t unpacked_entry_size; + size_t packed_entry_size; + size_t max_entry_count; +}; + +struct sja1105_table { + const struct sja1105_table_ops *ops; + size_t entry_count; + void *entries; +}; + +struct sja1105_static_config { + u64 device_id; + struct sja1105_table tables[BLK_IDX_MAX]; +}; + +struct sja1105_xpcs_cfg { + bool inband_an; + int speed; +}; + +struct sja1105_private { + struct sja1105_static_config static_config; + bool rgmii_rx_delay[SJA1105_MAX_NUM_PORTS]; + bool rgmii_tx_delay[SJA1105_MAX_NUM_PORTS]; + u16 pvid[SJA1105_MAX_NUM_PORTS]; + struct sja1105_xpcs_cfg xpcs_cfg[SJA1105_MAX_NUM_PORTS]; + struct mii_dev *mdio_pcs; + const struct sja1105_info *info; + struct udevice *dev; +}; + +typedef enum { + SPI_READ = 0, + SPI_WRITE = 1, +} sja1105_spi_rw_mode_t; + +typedef enum { + XMII_MAC = 0, + XMII_PHY = 1, +} sja1105_mii_role_t; + +typedef enum { + XMII_MODE_MII = 0, + XMII_MODE_RMII = 1, + XMII_MODE_RGMII = 2, + XMII_MODE_SGMII = 3, +} sja1105_phy_interface_t; + +enum { + SJA1105_SPEED_AUTO, + SJA1105_SPEED_10MBPS, + SJA1105_SPEED_100MBPS, + SJA1105_SPEED_1000MBPS, + SJA1105_SPEED_MAX, +}; + +enum sja1110_vlan_type { + SJA1110_VLAN_INVALID = 0, + SJA1110_VLAN_C_TAG = 1, /* Single inner VLAN tag */ + SJA1110_VLAN_S_TAG = 2, /* Single outer VLAN tag */ + SJA1110_VLAN_D_TAG = 3, /* Double tagged, use outer tag for lookup */ +}; + +/* Keeps the different addresses between E/T and P/Q/R/S */ +struct sja1105_regs { + u64 device_id; + u64 prod_id; + u64 status; + u64 port_control; + u64 rgu; + u64 config; + u64 rmii_pll1; + u64 pad_mii_tx[SJA1105_MAX_NUM_PORTS]; + u64 pad_mii_rx[SJA1105_MAX_NUM_PORTS]; + u64 pad_mii_id[SJA1105_MAX_NUM_PORTS]; + u64 cgu_idiv[SJA1105_MAX_NUM_PORTS]; + u64 mii_tx_clk[SJA1105_MAX_NUM_PORTS]; + u64 mii_rx_clk[SJA1105_MAX_NUM_PORTS]; + u64 mii_ext_tx_clk[SJA1105_MAX_NUM_PORTS]; + u64 mii_ext_rx_clk[SJA1105_MAX_NUM_PORTS]; + u64 rgmii_tx_clk[SJA1105_MAX_NUM_PORTS]; + u64 rmii_ref_clk[SJA1105_MAX_NUM_PORTS]; + u64 rmii_ext_tx_clk[SJA1105_MAX_NUM_PORTS]; + u64 pcs_base[SJA1105_MAX_NUM_PORTS]; +}; + +struct sja1105_info { + u64 device_id; + u64 part_no; + const struct sja1105_table_ops *static_ops; + const struct sja1105_regs *regs; + int (*reset_cmd)(struct sja1105_private *priv); + int (*setup_rgmii_delay)(struct sja1105_private *priv, int port); + int (*pcs_mdio_read)(struct mii_dev *bus, int phy, int mmd, int reg); + int (*pcs_mdio_write)(struct mii_dev *bus, int phy, int mmd, int reg, + u16 val); + int (*pma_config)(struct sja1105_private *priv, int port); + const char *name; + bool supports_mii[SJA1105_MAX_NUM_PORTS]; + bool supports_rmii[SJA1105_MAX_NUM_PORTS]; + bool supports_rgmii[SJA1105_MAX_NUM_PORTS]; + bool supports_sgmii[SJA1105_MAX_NUM_PORTS]; + const u64 port_speed[SJA1105_SPEED_MAX]; +}; + +struct sja1105_chunk { + u8 *buf; + size_t len; + u64 reg_addr; +}; + +struct sja1105_spi_message { + u64 access; + u64 read_count; + u64 address; +}; + +/* Common structure for CFG_PAD_MIIx_RX and CFG_PAD_MIIx_TX */ +struct sja1105_cfg_pad_mii { + u64 d32_os; + u64 d32_ih; + u64 d32_ipud; + u64 d10_ih; + u64 d10_os; + u64 d10_ipud; + u64 ctrl_os; + u64 ctrl_ih; + u64 ctrl_ipud; + u64 clk_os; + u64 clk_ih; + u64 clk_ipud; +}; + +struct sja1105_cfg_pad_mii_id { + u64 rxc_stable_ovr; + u64 rxc_delay; + u64 rxc_bypass; + u64 rxc_pd; + u64 txc_stable_ovr; + u64 txc_delay; + u64 txc_bypass; + u64 txc_pd; +}; + +struct sja1105_cgu_idiv { + u64 clksrc; + u64 autoblock; + u64 idiv; + u64 pd; +}; + +struct sja1105_cgu_pll_ctrl { + u64 pllclksrc; + u64 msel; + u64 autoblock; + u64 psel; + u64 direct; + u64 fbsel; + u64 bypass; + u64 pd; +}; + +enum { + CLKSRC_MII0_TX_CLK = 0x00, + CLKSRC_MII0_RX_CLK = 0x01, + CLKSRC_MII1_TX_CLK = 0x02, + CLKSRC_MII1_RX_CLK = 0x03, + CLKSRC_MII2_TX_CLK = 0x04, + CLKSRC_MII2_RX_CLK = 0x05, + CLKSRC_MII3_TX_CLK = 0x06, + CLKSRC_MII3_RX_CLK = 0x07, + CLKSRC_MII4_TX_CLK = 0x08, + CLKSRC_MII4_RX_CLK = 0x09, + CLKSRC_PLL0 = 0x0B, + CLKSRC_PLL1 = 0x0E, + CLKSRC_IDIV0 = 0x11, + CLKSRC_IDIV1 = 0x12, + CLKSRC_IDIV2 = 0x13, + CLKSRC_IDIV3 = 0x14, + CLKSRC_IDIV4 = 0x15, +}; + +struct sja1105_cgu_mii_ctrl { + u64 clksrc; + u64 autoblock; + u64 pd; +}; + +static int get_reverse_lsw32_offset(int offset, size_t len) +{ + int closest_multiple_of_4; + int word_index; + + word_index = offset / 4; + closest_multiple_of_4 = word_index * 4; + offset -= closest_multiple_of_4; + word_index = (len / 4) - word_index - 1; + return word_index * 4 + offset; +} + +/* Simplified version of the "packing" function from Linux, adapted + * to support only sja1105's quirk: QUIRK_LSW32_IS_FIRST + */ +static void sja1105_packing(void *pbuf, u64 *uval, int startbit, int endbit, + size_t pbuflen, enum packing_op op) +{ + int plogical_first_u8, plogical_last_u8, box; + + if (op == UNPACK) + *uval = 0; + + plogical_first_u8 = startbit / 8; + plogical_last_u8 = endbit / 8; + + for (box = plogical_first_u8; box >= plogical_last_u8; box--) { + int box_start_bit, box_end_bit, box_addr; + int proj_start_bit, proj_end_bit; + u64 proj_mask; + u8 box_mask; + + if (box == plogical_first_u8) + box_start_bit = startbit % 8; + else + box_start_bit = 7; + if (box == plogical_last_u8) + box_end_bit = endbit % 8; + else + box_end_bit = 0; + + proj_start_bit = ((box * 8) + box_start_bit) - endbit; + proj_end_bit = ((box * 8) + box_end_bit) - endbit; + proj_mask = GENMASK_ULL(proj_start_bit, proj_end_bit); + box_mask = GENMASK_ULL(box_start_bit, box_end_bit); + + box_addr = pbuflen - box - 1; + box_addr = get_reverse_lsw32_offset(box_addr, pbuflen); + + if (op == UNPACK) { + u64 pval; + + /* Read from pbuf, write to uval */ + pval = ((u8 *)pbuf)[box_addr] & box_mask; + + pval >>= box_end_bit; + pval <<= proj_end_bit; + *uval &= ~proj_mask; + *uval |= pval; + } else { + u64 pval; + + /* Write to pbuf, read from uval */ + pval = (*uval) & proj_mask; + pval >>= proj_end_bit; + + pval <<= box_end_bit; + ((u8 *)pbuf)[box_addr] &= ~box_mask; + ((u8 *)pbuf)[box_addr] |= pval; + } + } +} + +static u32 crc32_add(u32 crc, u8 byte) +{ + u32 byte32 = bitrev32(byte); + int i; + + for (i = 0; i < 8; i++) { + if ((crc ^ byte32) & BIT(31)) { + crc <<= 1; + crc ^= ETHER_CRC32_POLY; + } else { + crc <<= 1; + } + byte32 <<= 1; + } + return crc; +} + +/* Little-endian Ethernet CRC32 of data packed as big-endian u32 words */ +static uint32_t sja1105_crc32(void *buf, size_t len) +{ + unsigned int i; + u64 chunk; + u32 crc; + + /* seed */ + crc = 0xFFFFFFFF; + for (i = 0; i < len; i += 4) { + sja1105_packing(buf + i, &chunk, 31, 0, 4, UNPACK); + crc = crc32_add(crc, chunk & 0xFF); + crc = crc32_add(crc, (chunk >> 8) & 0xFF); + crc = crc32_add(crc, (chunk >> 16) & 0xFF); + crc = crc32_add(crc, (chunk >> 24) & 0xFF); + } + return bitrev32(~crc); +} + +static void sja1105_spi_message_pack(void *buf, struct sja1105_spi_message *msg) +{ + const int size = SJA1105_SIZE_SPI_MSG_HEADER; + + memset(buf, 0, size); + + sja1105_packing(buf, &msg->access, 31, 31, size, PACK); + sja1105_packing(buf, &msg->read_count, 30, 25, size, PACK); + sja1105_packing(buf, &msg->address, 24, 4, size, PACK); +} + +static int sja1105_xfer_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u8 *buf, size_t len) +{ + struct udevice *dev = priv->dev; + struct sja1105_chunk chunk = { + .len = min_t(size_t, len, SJA1105_SIZE_SPI_MSG_MAXLEN), + .reg_addr = reg_addr, + .buf = buf, + }; + int num_chunks; + int rc, i; + + rc = dm_spi_claim_bus(dev); + if (rc) + return rc; + + num_chunks = DIV_ROUND_UP(len, SJA1105_SIZE_SPI_MSG_MAXLEN); + + for (i = 0; i < num_chunks; i++) { + u8 hdr_buf[SJA1105_SIZE_SPI_MSG_HEADER]; + struct sja1105_spi_message msg; + u8 *rx_buf = NULL; + u8 *tx_buf = NULL; + + /* Populate the transfer's header buffer */ + msg.address = chunk.reg_addr; + msg.access = rw; + if (rw == SPI_READ) + msg.read_count = chunk.len / 4; + else + /* Ignored */ + msg.read_count = 0; + sja1105_spi_message_pack(hdr_buf, &msg); + rc = dm_spi_xfer(dev, SJA1105_SIZE_SPI_MSG_HEADER * 8, hdr_buf, + NULL, SPI_XFER_BEGIN); + if (rc) + goto out; + + /* Populate the transfer's data buffer */ + if (rw == SPI_READ) + rx_buf = chunk.buf; + else + tx_buf = chunk.buf; + rc = dm_spi_xfer(dev, chunk.len * 8, tx_buf, rx_buf, + SPI_XFER_END); + if (rc) + goto out; + + /* Calculate next chunk */ + chunk.buf += chunk.len; + chunk.reg_addr += chunk.len / 4; + chunk.len = min_t(size_t, (ptrdiff_t)(buf + len - chunk.buf), + SJA1105_SIZE_SPI_MSG_MAXLEN); + } + +out: + dm_spi_release_bus(dev); + + return rc; +} + +static int sja1105et_reset_cmd(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_RESET_CMD] = {0}; + const int size = SJA1105_SIZE_RESET_CMD; + u64 cold_rst = 1; + + sja1105_packing(packed_buf, &cold_rst, 3, 3, size, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgu, packed_buf, + SJA1105_SIZE_RESET_CMD); +} + +static int sja1105pqrs_reset_cmd(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_RESET_CMD] = {0}; + const int size = SJA1105_SIZE_RESET_CMD; + u64 cold_rst = 1; + + sja1105_packing(packed_buf, &cold_rst, 2, 2, size, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgu, packed_buf, + SJA1105_SIZE_RESET_CMD); +} + +static int sja1110_reset_cmd(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_RESET_CMD] = {0}; + const int size = SJA1105_SIZE_RESET_CMD; + u64 switch_rst = 1; + + /* Only reset the switch core. + * A full cold reset would re-enable the BASE_MCSS_CLOCK PLL which + * would turn on the microcontroller, potentially letting it execute + * code which could interfere with our configuration. + */ + sja1105_packing(packed_buf, &switch_rst, 20, 20, size, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgu, packed_buf, + SJA1105_SIZE_RESET_CMD); +} + +static size_t sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->mac_fltres1, 311, 264, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 263, 216, size, op); + sja1105_packing(buf, &entry->mac_flt1, 215, 168, size, op); + sja1105_packing(buf, &entry->mac_flt0, 167, 120, size, op); + sja1105_packing(buf, &entry->casc_port, 115, 113, size, op); + sja1105_packing(buf, &entry->host_port, 112, 110, size, op); + sja1105_packing(buf, &entry->mirr_port, 109, 107, size, op); + sja1105_packing(buf, &entry->tpid, 42, 27, size, op); + sja1105_packing(buf, &entry->tpid2, 25, 10, size, op); + return size; +} + +static size_t sja1110_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_general_params_entry *entry = entry_ptr; + const size_t size = SJA1110_SIZE_GENERAL_PARAMS_ENTRY; + + sja1105_packing(buf, &entry->mac_fltres1, 438, 391, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 390, 343, size, op); + sja1105_packing(buf, &entry->mac_flt1, 342, 295, size, op); + sja1105_packing(buf, &entry->mac_flt0, 294, 247, size, op); + sja1105_packing(buf, &entry->casc_port, 242, 232, size, op); + sja1105_packing(buf, &entry->host_port, 231, 228, size, op); + sja1105_packing(buf, &entry->mirr_port, 227, 224, size, op); + sja1105_packing(buf, &entry->tpid2, 159, 144, size, op); + sja1105_packing(buf, &entry->tpid, 142, 127, size, op); + return size; +} + +static size_t +sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->mac_fltres1, 343, 296, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 295, 248, size, op); + sja1105_packing(buf, &entry->mac_flt1, 247, 200, size, op); + sja1105_packing(buf, &entry->mac_flt0, 199, 152, size, op); + sja1105_packing(buf, &entry->casc_port, 147, 145, size, op); + sja1105_packing(buf, &entry->host_port, 144, 142, size, op); + sja1105_packing(buf, &entry->mirr_port, 141, 139, size, op); + sja1105_packing(buf, &entry->tpid, 74, 59, size, op); + sja1105_packing(buf, &entry->tpid2, 57, 42, size, op); + return size; +} + +static size_t +sja1105_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY; + struct sja1105_l2_forwarding_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 13; i < SJA1105_NUM_TC; i++, offset += 10) + sja1105_packing(buf, &entry->part_spc[i], + offset + 9, offset + 0, size, op); + return size; +} + +static size_t +sja1110_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_forwarding_params_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY; + int offset, i; + + for (i = 0, offset = 5; i < 8; i++, offset += 11) + sja1105_packing(buf, &entry->part_spc[i], + offset + 10, offset + 0, size, op); + return size; +} + +static size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_ENTRY; + struct sja1105_l2_forwarding_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->bc_domain, 63, 59, size, op); + sja1105_packing(buf, &entry->reach_port, 58, 54, size, op); + sja1105_packing(buf, &entry->fl_domain, 53, 49, size, op); + return size; +} + +static size_t sja1110_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_forwarding_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_L2_FORWARDING_ENTRY; + + sja1105_packing(buf, &entry->bc_domain, 63, 53, size, op); + sja1105_packing(buf, &entry->reach_port, 52, 42, size, op); + sja1105_packing(buf, &entry->fl_domain, 41, 31, size, op); + return size; +} + +static size_t sja1105_l2_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_policing_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_L2_POLICING_ENTRY; + + sja1105_packing(buf, &entry->sharindx, 63, 58, size, op); + sja1105_packing(buf, &entry->smax, 57, 42, size, op); + sja1105_packing(buf, &entry->rate, 41, 26, size, op); + sja1105_packing(buf, &entry->maxlen, 25, 15, size, op); + sja1105_packing(buf, &entry->partition, 14, 12, size, op); + return size; +} + +static size_t sja1110_l2_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_policing_entry *entry = entry_ptr; + const size_t size = SJA1105_SIZE_L2_POLICING_ENTRY; + + sja1105_packing(buf, &entry->sharindx, 63, 57, size, op); + sja1105_packing(buf, &entry->smax, 56, 39, size, op); + sja1105_packing(buf, &entry->rate, 38, 21, size, op); + sja1105_packing(buf, &entry->maxlen, 20, 10, size, op); + sja1105_packing(buf, &entry->partition, 9, 7, size, op); + return size; +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 72; i < SJA1105_NUM_TC; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->speed, 66, 65, size, op); + sja1105_packing(buf, &entry->vlanid, 21, 10, size, op); + sja1105_packing(buf, &entry->egress, 2, 2, size, op); + sja1105_packing(buf, &entry->ingress, 1, 1, size, op); + return size; +} + +static size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 104; i < SJA1105_NUM_TC; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->speed, 98, 97, size, op); + sja1105_packing(buf, &entry->vlanid, 53, 42, size, op); + sja1105_packing(buf, &entry->egress, 32, 32, size, op); + sja1105_packing(buf, &entry->ingress, 31, 31, size, op); + return size; +} + +static size_t sja1110_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 104; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->speed, 98, 96, size, op); + sja1105_packing(buf, &entry->vlanid, 52, 41, size, op); + sja1105_packing(buf, &entry->egress, 31, 31, size, op); + sja1105_packing(buf, &entry->ingress, 30, 30, size, op); + return size; +} + +static size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY; + struct sja1105_vlan_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vmemb_port, 53, 49, size, op); + sja1105_packing(buf, &entry->vlan_bc, 48, 44, size, op); + sja1105_packing(buf, &entry->tag_port, 43, 39, size, op); + sja1105_packing(buf, &entry->vlanid, 38, 27, size, op); + return size; +} + +static size_t sja1110_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_vlan_lookup_entry *entry = entry_ptr; + const size_t size = SJA1110_SIZE_VLAN_LOOKUP_ENTRY; + + sja1105_packing(buf, &entry->vmemb_port, 73, 63, size, op); + sja1105_packing(buf, &entry->vlan_bc, 62, 52, size, op); + sja1105_packing(buf, &entry->tag_port, 51, 41, size, op); + sja1105_packing(buf, &entry->type_entry, 40, 39, size, op); + sja1105_packing(buf, &entry->vlanid, 38, 27, size, op); + return size; +} + +static size_t sja1105_xmii_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_XMII_PARAMS_ENTRY; + struct sja1105_xmii_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 17; i < SJA1105_NUM_PORTS; i++, offset += 3) { + sja1105_packing(buf, &entry->xmii_mode[i], + offset + 1, offset + 0, size, op); + sja1105_packing(buf, &entry->phy_mac[i], + offset + 2, offset + 2, size, op); + } + return size; +} + +static size_t sja1110_xmii_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1110_SIZE_XMII_PARAMS_ENTRY; + struct sja1105_xmii_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 20; i < SJA1110_NUM_PORTS; i++, offset += 4) { + sja1105_packing(buf, &entry->xmii_mode[i], + offset + 1, offset + 0, size, op); + sja1105_packing(buf, &entry->phy_mac[i], + offset + 2, offset + 2, size, op); + sja1105_packing(buf, &entry->special[i], + offset + 3, offset + 3, size, op); + } + return size; +} + +static size_t sja1105_table_header_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_TABLE_HEADER; + struct sja1105_table_header *entry = entry_ptr; + + sja1105_packing(buf, &entry->block_id, 31, 24, size, op); + sja1105_packing(buf, &entry->len, 55, 32, size, op); + sja1105_packing(buf, &entry->crc, 95, 64, size, op); + return size; +} + +static void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr) +{ + /* First pack the table as-is, then calculate the CRC, and + * finally put the proper CRC into the packed buffer + */ + memset(buf, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(buf, hdr, PACK); + hdr->crc = sja1105_crc32(buf, SJA1105_SIZE_TABLE_HEADER - 4); + sja1105_packing(buf + SJA1105_SIZE_TABLE_HEADER - 4, &hdr->crc, + 31, 0, 4, PACK); +} + +static void sja1105_table_write_crc(u8 *table_start, u8 *crc_ptr) +{ + u64 computed_crc; + int len_bytes; + + len_bytes = (uintptr_t)(crc_ptr - table_start); + computed_crc = sja1105_crc32(table_start, len_bytes); + sja1105_packing(crc_ptr, &computed_crc, 31, 0, 4, PACK); +} + +/* The block IDs that the switches support are unfortunately sparse, so keep a + * mapping table to "block indices" and translate back and forth. + */ +static const u64 blk_id_map[BLK_IDX_MAX] = { + [BLK_IDX_L2_POLICING] = BLKID_L2_POLICING, + [BLK_IDX_VLAN_LOOKUP] = BLKID_VLAN_LOOKUP, + [BLK_IDX_L2_FORWARDING] = BLKID_L2_FORWARDING, + [BLK_IDX_MAC_CONFIG] = BLKID_MAC_CONFIG, + [BLK_IDX_L2_FORWARDING_PARAMS] = BLKID_L2_FORWARDING_PARAMS, + [BLK_IDX_GENERAL_PARAMS] = BLKID_GENERAL_PARAMS, + [BLK_IDX_XMII_PARAMS] = BLKID_XMII_PARAMS, +}; + +static void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config) +{ + struct sja1105_table_header header = {0}; + enum sja1105_blk_idx i; + u8 *p = buf; + int j; + + sja1105_packing(p, &config->device_id, 31, 0, 4, PACK); + p += SJA1105_SIZE_DEVICE_ID; + + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + u8 *table_start; + + table = &config->tables[i]; + if (!table->entry_count) + continue; + + header.block_id = blk_id_map[i]; + header.len = table->entry_count * + table->ops->packed_entry_size / 4; + sja1105_table_header_pack_with_crc(p, &header); + p += SJA1105_SIZE_TABLE_HEADER; + table_start = p; + for (j = 0; j < table->entry_count; j++) { + u8 *entry_ptr = table->entries; + + entry_ptr += j * table->ops->unpacked_entry_size; + memset(p, 0, table->ops->packed_entry_size); + table->ops->packing(p, entry_ptr, PACK); + p += table->ops->packed_entry_size; + } + sja1105_table_write_crc(table_start, p); + p += 4; + } + /* Final header: + * Block ID does not matter + * Length of 0 marks that header is final + * CRC will be replaced on-the-fly + */ + header.block_id = 0; + header.len = 0; + header.crc = 0xDEADBEEF; + memset(p, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(p, &header, PACK); +} + +static size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config) +{ + unsigned int header_count; + enum sja1105_blk_idx i; + unsigned int sum; + + /* Ending header */ + header_count = 1; + sum = SJA1105_SIZE_DEVICE_ID; + + /* Tables (headers and entries) */ + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + + table = &config->tables[i]; + if (table->entry_count) + header_count++; + + sum += table->ops->packed_entry_size * table->entry_count; + } + /* Headers have an additional CRC at the end */ + sum += header_count * (SJA1105_SIZE_TABLE_HEADER + 4); + /* Last header does not have an extra CRC because there is no data */ + sum -= 4; + + return sum; +} + +/* Compatibility matrices */ +static const struct sja1105_table_ops sja1105et_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +static const struct sja1105_table_ops sja1105pqrs_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +static const struct sja1105_table_ops sja1110_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_POLICING] = { + .packing = sja1110_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1110_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1110_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1110_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1110_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1110_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1110_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1110_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1110_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1110_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1110_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1110_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1110_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +static int sja1105_init_mii_settings(struct sja1105_private *priv) +{ + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_XMII_PARAMS]; + + table->entries = calloc(SJA1105_MAX_XMII_PARAMS_COUNT, + table->ops->unpacked_entry_size); + if (!table->entries) + return -ENOMEM; + + /* Table will be populated at runtime */ + table->entry_count = SJA1105_MAX_XMII_PARAMS_COUNT; + + return 0; +} + +static void sja1105_setup_tagging(struct sja1105_private *priv, int port) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(priv->dev); + struct sja1105_vlan_lookup_entry *vlan; + int cpu = pdata->cpu_port; + + /* The CPU port is implicitly configured by + * configuring the front-panel ports + */ + if (port == cpu) + return; + + vlan = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entries; + + priv->pvid[port] = DSA_8021Q_DIR_TX | DSA_8021Q_PORT(port); + + vlan[port].vmemb_port = BIT(port) | BIT(cpu); + vlan[port].vlan_bc = BIT(port) | BIT(cpu); + vlan[port].tag_port = BIT(cpu); + vlan[port].vlanid = priv->pvid[port]; + vlan[port].type_entry = SJA1110_VLAN_D_TAG; +} + +static int sja1105_init_vlan(struct sja1105_private *priv) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(priv->dev); + struct sja1105_table *table; + int port; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + table->entries = calloc(pdata->num_ports, + table->ops->unpacked_entry_size); + if (!table->entries) + return -ENOMEM; + + table->entry_count = pdata->num_ports; + + for (port = 0; port < pdata->num_ports; port++) + sja1105_setup_tagging(priv, port); + + return 0; +} + +static void +sja1105_port_allow_traffic(struct sja1105_l2_forwarding_entry *l2_fwd, + int from, int to) +{ + l2_fwd[from].bc_domain |= BIT(to); + l2_fwd[from].reach_port |= BIT(to); + l2_fwd[from].fl_domain |= BIT(to); +} + +static int sja1105_init_l2_forwarding(struct sja1105_private *priv) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(priv->dev); + struct sja1105_l2_forwarding_entry *l2fwd; + struct sja1105_table *table; + int cpu = pdata->cpu_port; + int i; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING]; + + table->entries = calloc(SJA1105_MAX_L2_FORWARDING_COUNT, + table->ops->unpacked_entry_size); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_FORWARDING_COUNT; + + l2fwd = table->entries; + + /* First 5 entries define the forwarding rules */ + for (i = 0; i < pdata->num_ports; i++) { + if (i == cpu) + continue; + + sja1105_port_allow_traffic(l2fwd, i, cpu); + sja1105_port_allow_traffic(l2fwd, cpu, i); + } + /* Next 8 entries define VLAN PCP mapping from ingress to egress. + * Leave them unpopulated (implicitly 0) but present. + */ + return 0; +} + +static int sja1105_init_l2_forwarding_params(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_params_entry default_l2fwd_params = { + /* Use a single memory partition for all ingress queues */ + .part_spc = { SJA1105_MAX_FRAME_MEMORY, 0, 0, 0, 0, 0, 0, 0 }, + }; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING_PARAMS]; + + table->entries = calloc(SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + table->ops->unpacked_entry_size); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_l2_forwarding_params_entry *)table->entries)[0] = + default_l2fwd_params; + + return 0; +} + +static int sja1105_init_general_params(struct sja1105_private *priv) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(priv->dev); + struct sja1105_general_params_entry default_general_params = { + /* No frame trapping */ + .mac_fltres1 = 0x0, + .mac_flt1 = 0xffffffffffff, + .mac_fltres0 = 0x0, + .mac_flt0 = 0xffffffffffff, + .host_port = pdata->num_ports, + /* No mirroring => specify an out-of-range port value */ + .mirr_port = pdata->num_ports, + /* No link-local trapping => specify an out-of-range port value + */ + .casc_port = pdata->num_ports, + /* Force the switch to see all traffic as untagged. */ + .tpid = ETH_P_SJA1105, + .tpid2 = ETH_P_SJA1105, + }; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + + table->entries = calloc(SJA1105_MAX_GENERAL_PARAMS_COUNT, + table->ops->unpacked_entry_size); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_general_params_entry *)table->entries)[0] = + default_general_params; + + return 0; +} + +static void sja1105_setup_policer(struct sja1105_l2_policing_entry *policing, + int index, int mtu) +{ + policing[index].sharindx = index; + policing[index].smax = 65535; /* Burst size in bytes */ + policing[index].rate = SJA1105_RATE_MBPS(1000); + policing[index].maxlen = mtu; + policing[index].partition = 0; +} + +static int sja1105_init_l2_policing(struct sja1105_private *priv) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(priv->dev); + struct sja1105_l2_policing_entry *policing; + struct sja1105_table *table; + int cpu = pdata->cpu_port; + int i, j, k; + + table = &priv->static_config.tables[BLK_IDX_L2_POLICING]; + + table->entries = calloc(SJA1105_MAX_L2_POLICING_COUNT, + table->ops->unpacked_entry_size); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_POLICING_COUNT; + + policing = table->entries; + + /* k sweeps through all unicast policers (0-39). + * bcast sweeps through policers 40-44. + */ + for (i = 0, k = 0; i < pdata->num_ports; i++) { + int bcast = (pdata->num_ports * SJA1105_NUM_TC) + i; + int mtu = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; + + if (i == cpu) + mtu += VLAN_HLEN; + + for (j = 0; j < SJA1105_NUM_TC; j++, k++) + sja1105_setup_policer(policing, k, mtu); + + /* Set up this port's policer for broadcast traffic */ + sja1105_setup_policer(policing, bcast, mtu); + } + return 0; +} + +static int sja1105_init_mac_settings(struct sja1105_private *priv) +{ + struct sja1105_mac_config_entry default_mac = { + /* Enable 1 priority queue on egress. */ + .top = {0x1FF, 0, 0, 0, 0, 0, 0}, + .base = {0x0, 0, 0, 0, 0, 0, 0, 0}, + .enabled = {1, 0, 0, 0, 0, 0, 0, 0}, + /* Will be overridden in sja1105_port_enable. */ + .speed = priv->info->port_speed[SJA1105_SPEED_AUTO], + .egress = true, + .ingress = true, + }; + struct dsa_pdata *pdata = dev_get_uclass_plat(priv->dev); + struct sja1105_mac_config_entry *mac; + struct sja1105_table *table; + int port; + + table = &priv->static_config.tables[BLK_IDX_MAC_CONFIG]; + + table->entries = calloc(pdata->num_ports, + table->ops->unpacked_entry_size); + if (!table->entries) + return -ENOMEM; + + table->entry_count = pdata->num_ports; + + mac = table->entries; + + for (port = 0; port < pdata->num_ports; port++) { + mac[port] = default_mac; + /* Internal VLAN (pvid) to apply to untagged ingress */ + mac[port].vlanid = priv->pvid[port]; + } + + return 0; +} + +static int sja1105_static_config_init(struct sja1105_private *priv) +{ + struct sja1105_static_config *config = &priv->static_config; + const struct sja1105_table_ops *static_ops = priv->info->static_ops; + u64 device_id = priv->info->device_id; + enum sja1105_blk_idx i; + int rc; + + *config = (struct sja1105_static_config) {0}; + + /* Transfer static_ops array from priv into per-table ops + * for handier access + */ + for (i = 0; i < BLK_IDX_MAX; i++) + config->tables[i].ops = &static_ops[i]; + + config->device_id = device_id; + + /* Build initial static configuration, to be fixed up during runtime */ + rc = sja1105_init_vlan(priv); + if (rc < 0) + return rc; + rc = sja1105_init_mac_settings(priv); + if (rc < 0) + return rc; + rc = sja1105_init_mii_settings(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_policing(priv); + if (rc < 0) + return rc; + rc = sja1105_init_general_params(priv); + if (rc < 0) + return rc; + + return 0; +} + +static void sja1105_static_config_free(struct sja1105_static_config *config) +{ + enum sja1105_blk_idx i; + + for (i = 0; i < BLK_IDX_MAX; i++) { + if (config->tables[i].entry_count) { + free(config->tables[i].entries); + config->tables[i].entry_count = 0; + } + } +} + +static void sja1105_cgu_idiv_packing(void *buf, struct sja1105_cgu_idiv *idiv, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &idiv->clksrc, 28, 24, size, op); + sja1105_packing(buf, &idiv->autoblock, 11, 11, size, op); + sja1105_packing(buf, &idiv->idiv, 5, 2, size, op); + sja1105_packing(buf, &idiv->pd, 0, 0, size, op); +} + +static int sja1105_cgu_idiv_config(struct sja1105_private *priv, int port, + bool enabled, int factor) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1105_cgu_idiv idiv; + + if (regs->cgu_idiv[port] == SJA1105_RSV_ADDR) + return 0; + + if (enabled && factor != 1 && factor != 10) + return -ERANGE; + + /* Payload for packed_buf */ + idiv.clksrc = 0x0A; /* 25MHz */ + idiv.autoblock = 1; /* Block clk automatically */ + idiv.idiv = factor - 1; /* Divide by 1 or 10 */ + idiv.pd = enabled ? 0 : 1; /* Power down? */ + sja1105_cgu_idiv_packing(packed_buf, &idiv, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->cgu_idiv[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static void +sja1105_cgu_mii_control_packing(void *buf, struct sja1105_cgu_mii_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->clksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv, + int port, sja1105_mii_role_t role) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_tx_clk; + const int mac_clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + const int phy_clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (regs->mii_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + if (role == XMII_MAC) + clksrc = mac_clk_sources[port]; + else + clksrc = phy_clk_sources[port]; + + /* Payload for packed_buf */ + mii_tx_clk.clksrc = clksrc; + mii_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_tx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1105_cgu_mii_ctrl mii_rx_clk; + const int clk_sources[] = { + CLKSRC_MII0_RX_CLK, + CLKSRC_MII1_RX_CLK, + CLKSRC_MII2_RX_CLK, + CLKSRC_MII3_RX_CLK, + CLKSRC_MII4_RX_CLK, + }; + + if (regs->mii_rx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + mii_rx_clk.clksrc = clk_sources[port]; + mii_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_rx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_rx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + if (regs->mii_ext_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + mii_ext_tx_clk.clksrc = clk_sources[port]; + mii_ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_tx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + if (regs->mii_ext_rx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + mii_ext_rx_clk.clksrc = clk_sources[port]; + mii_ext_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_rx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_ext_rx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_mii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + int rc; + + rc = sja1105_cgu_idiv_config(priv, port, (role == XMII_PHY), 1); + if (rc < 0) + return rc; + + rc = sja1105_cgu_mii_tx_clk_config(priv, port, role); + if (rc < 0) + return rc; + + rc = sja1105_cgu_mii_rx_clk_config(priv, port); + if (rc < 0) + return rc; + + if (role == XMII_PHY) { + rc = sja1105_cgu_mii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + + rc = sja1105_cgu_mii_ext_rx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +static void +sja1105_cgu_pll_control_packing(void *buf, struct sja1105_cgu_pll_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->pllclksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->msel, 23, 16, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->psel, 9, 8, size, op); + sja1105_packing(buf, &cmd->direct, 7, 7, size, op); + sja1105_packing(buf, &cmd->fbsel, 6, 6, size, op); + sja1105_packing(buf, &cmd->bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv, + int port, u64 speed) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl txc; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (regs->rgmii_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { + clksrc = CLKSRC_PLL0; + } else { + int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, + CLKSRC_IDIV3, CLKSRC_IDIV4}; + clksrc = clk_sources[port]; + } + + /* RGMII: 125MHz for 1000, 25MHz for 100, 2.5MHz for 10 */ + txc.clksrc = clksrc; + /* Autoblock clk while changing clksrc */ + txc.autoblock = 1; + /* Power Down off => enabled */ + txc.pd = 0; + sja1105_cgu_mii_control_packing(packed_buf, &txc, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgmii_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +/* AGU */ +static void +sja1105_cfg_pad_mii_packing(void *buf, struct sja1105_cfg_pad_mii *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->d32_os, 28, 27, size, op); + sja1105_packing(buf, &cmd->d32_ih, 26, 26, size, op); + sja1105_packing(buf, &cmd->d32_ipud, 25, 24, size, op); + sja1105_packing(buf, &cmd->d10_os, 20, 19, size, op); + sja1105_packing(buf, &cmd->d10_ih, 18, 18, size, op); + sja1105_packing(buf, &cmd->d10_ipud, 17, 16, size, op); + sja1105_packing(buf, &cmd->ctrl_os, 12, 11, size, op); + sja1105_packing(buf, &cmd->ctrl_ih, 10, 10, size, op); + sja1105_packing(buf, &cmd->ctrl_ipud, 9, 8, size, op); + sja1105_packing(buf, &cmd->clk_os, 4, 3, size, op); + sja1105_packing(buf, &cmd->clk_ih, 2, 2, size, op); + sja1105_packing(buf, &cmd->clk_ipud, 1, 0, size, op); +} + +static void +sja1110_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_CGU_CMD; + u64 range = 4; + + /* Fields RXC_RANGE and TXC_RANGE select the input frequency range: + * 0 = 2.5MHz + * 1 = 25MHz + * 2 = 50MHz + * 3 = 125MHz + * 4 = Automatically determined by port speed. + * There's no point in defining a structure different than the one for + * SJA1105, so just hardcode the frequency range to automatic, just as + * before. + */ + sja1105_packing(buf, &cmd->rxc_stable_ovr, 26, 26, size, op); + sja1105_packing(buf, &cmd->rxc_delay, 25, 21, size, op); + sja1105_packing(buf, &range, 20, 18, size, op); + sja1105_packing(buf, &cmd->rxc_bypass, 17, 17, size, op); + sja1105_packing(buf, &cmd->rxc_pd, 16, 16, size, op); + sja1105_packing(buf, &cmd->txc_stable_ovr, 10, 10, size, op); + sja1105_packing(buf, &cmd->txc_delay, 9, 5, size, op); + sja1105_packing(buf, &range, 4, 2, size, op); + sja1105_packing(buf, &cmd->txc_bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->txc_pd, 0, 0, size, op); +} + +static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii pad_mii_tx = {0}; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (regs->pad_mii_tx[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload */ + pad_mii_tx.d32_os = 3; /* TXD[3:2] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d10_os = 3; /* TXD[1:0] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d32_ipud = 2; /* TXD[3:2] input stage: */ + /* plain input (default) */ + pad_mii_tx.d10_ipud = 2; /* TXD[1:0] input stage: */ + /* plain input (default) */ + pad_mii_tx.ctrl_os = 3; /* TX_CTL / TX_ER output stage */ + pad_mii_tx.ctrl_ipud = 2; /* TX_CTL / TX_ER input stage (default) */ + pad_mii_tx.clk_os = 3; /* TX_CLK output stage */ + pad_mii_tx.clk_ih = 0; /* TX_CLK input hysteresis (default) */ + pad_mii_tx.clk_ipud = 2; /* TX_CLK input stage (default) */ + sja1105_cfg_pad_mii_packing(packed_buf, &pad_mii_tx, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_tx[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_cfg_pad_rx_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii pad_mii_rx = {0}; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (regs->pad_mii_rx[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload */ + pad_mii_rx.d32_ih = 0; /* RXD[3:2] input stage hysteresis: */ + /* non-Schmitt (default) */ + pad_mii_rx.d32_ipud = 2; /* RXD[3:2] input weak pull-up/down */ + /* plain input (default) */ + pad_mii_rx.d10_ih = 0; /* RXD[1:0] input stage hysteresis: */ + /* non-Schmitt (default) */ + pad_mii_rx.d10_ipud = 2; /* RXD[1:0] input weak pull-up/down */ + /* plain input (default) */ + pad_mii_rx.ctrl_ih = 0; /* RX_DV/CRS_DV/RX_CTL and RX_ER */ + /* input stage hysteresis: */ + /* non-Schmitt (default) */ + pad_mii_rx.ctrl_ipud = 3; /* RX_DV/CRS_DV/RX_CTL and RX_ER */ + /* input stage weak pull-up/down: */ + /* pull-down */ + pad_mii_rx.clk_os = 2; /* RX_CLK/RXC output stage: */ + /* medium noise/fast speed (default) */ + pad_mii_rx.clk_ih = 0; /* RX_CLK/RXC input hysteresis: */ + /* non-Schmitt (default) */ + pad_mii_rx.clk_ipud = 2; /* RX_CLK/RXC input pull-up/down: */ + /* plain input (default) */ + sja1105_cfg_pad_mii_packing(packed_buf, &pad_mii_rx, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_rx[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static void +sja1105_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_CGU_CMD; + + sja1105_packing(buf, &cmd->rxc_stable_ovr, 15, 15, size, op); + sja1105_packing(buf, &cmd->rxc_delay, 14, 10, size, op); + sja1105_packing(buf, &cmd->rxc_bypass, 9, 9, size, op); + sja1105_packing(buf, &cmd->rxc_pd, 8, 8, size, op); + sja1105_packing(buf, &cmd->txc_stable_ovr, 7, 7, size, op); + sja1105_packing(buf, &cmd->txc_delay, 6, 2, size, op); + sja1105_packing(buf, &cmd->txc_bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->txc_pd, 0, 0, size, op); +} + +/* Valid range in degrees is an integer between 73.8 and 101.7 */ +static u64 sja1105_rgmii_delay(u64 phase) +{ + /* UM11040.pdf: The delay in degree phase is 73.8 + delay_tune * 0.9. + * To avoid floating point operations we'll multiply by 10 + * and get 1 decimal point precision. + */ + phase *= 10; + return (phase - 738) / 9; +} + +static int sja1105pqrs_setup_rgmii_delay(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_id pad_mii_id = {0}; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int rc; + + if (priv->rgmii_rx_delay[port]) + pad_mii_id.rxc_delay = sja1105_rgmii_delay(90); + if (priv->rgmii_tx_delay[port]) + pad_mii_id.txc_delay = sja1105_rgmii_delay(90); + + /* Stage 1: Turn the RGMII delay lines off. */ + pad_mii_id.rxc_bypass = 1; + pad_mii_id.rxc_pd = 1; + pad_mii_id.txc_bypass = 1; + pad_mii_id.txc_pd = 1; + sja1105_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) + return rc; + + /* Stage 2: Turn the RGMII delay lines on. */ + if (priv->rgmii_rx_delay[port]) { + pad_mii_id.rxc_bypass = 0; + pad_mii_id.rxc_pd = 0; + } + if (priv->rgmii_tx_delay[port]) { + pad_mii_id.txc_bypass = 0; + pad_mii_id.txc_pd = 0; + } + sja1105_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1110_setup_rgmii_delay(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_id pad_mii_id = {0}; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + pad_mii_id.rxc_pd = 1; + pad_mii_id.txc_pd = 1; + + if (priv->rgmii_rx_delay[port]) { + pad_mii_id.rxc_delay = sja1105_rgmii_delay(90); + /* The "BYPASS" bit in SJA1110 is actually a "don't bypass" */ + pad_mii_id.rxc_bypass = 1; + pad_mii_id.rxc_pd = 0; + } + + if (priv->rgmii_tx_delay[port]) { + pad_mii_id.txc_delay = sja1105_rgmii_delay(90); + pad_mii_id.txc_bypass = 1; + pad_mii_id.txc_pd = 0; + } + + sja1110_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct sja1105_mac_config_entry *mac; + struct udevice *dev = priv->dev; + u64 speed; + int rc; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + speed = mac[port].speed; + + if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { + /* 1000Mbps, IDIV disabled (125 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + } else if (speed == priv->info->port_speed[SJA1105_SPEED_100MBPS]) { + /* 100Mbps, IDIV enabled, divide by 1 (25 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 1); + } else if (speed == priv->info->port_speed[SJA1105_SPEED_10MBPS]) { + /* 10Mbps, IDIV enabled, divide by 10 (2.5 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 10); + } else if (speed == priv->info->port_speed[SJA1105_SPEED_AUTO]) { + /* Skip CGU configuration if there is no speed available + * (e.g. link is not established yet) + */ + dev_dbg(dev, "Speed not available, skipping CGU config\n"); + return 0; + } else { + rc = -EINVAL; + } + + if (rc < 0) { + dev_err(dev, "Failed to configure idiv\n"); + return rc; + } + rc = sja1105_cgu_rgmii_tx_clk_config(priv, port, speed); + if (rc < 0) { + dev_err(dev, "Failed to configure RGMII Tx clock\n"); + return rc; + } + rc = sja1105_rgmii_cfg_pad_tx_config(priv, port); + if (rc < 0) { + dev_err(dev, "Failed to configure Tx pad registers\n"); + return rc; + } + + if (!priv->info->setup_rgmii_delay) + return 0; + + return priv->info->setup_rgmii_delay(priv, port); +} + +static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1105_cgu_mii_ctrl ref_clk; + const int clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + + if (regs->rmii_ref_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + ref_clk.clksrc = clk_sources[port]; + ref_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ref_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ref_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_ref_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_rmii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (regs->rmii_ext_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + /* Payload for packed_buf */ + ext_tx_clk.clksrc = CLKSRC_PLL1; + ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ext_tx_clk, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_cgu_rmii_pll_config(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1105_cgu_pll_ctrl pll = {0}; + int rc; + + if (regs->rmii_pll1 == SJA1105_RSV_ADDR) + return 0; + + /* Step 1: PLL1 setup for 50Mhz */ + pll.pllclksrc = 0xA; + pll.msel = 0x1; + pll.autoblock = 0x1; + pll.psel = 0x1; + pll.direct = 0x0; + pll.fbsel = 0x1; + pll.bypass = 0x0; + pll.pd = 0x1; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_pll1, packed_buf, + SJA1105_SIZE_CGU_CMD); + if (rc < 0) + return rc; + + /* Step 2: Enable PLL1 */ + pll.pd = 0x0; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_pll1, packed_buf, + SJA1105_SIZE_CGU_CMD); + return rc; +} + +static int sja1105_rmii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + int rc; + + /* AH1601.pdf chapter 2.5.1. Sources */ + if (role == XMII_MAC) { + /* Configure and enable PLL1 for 50Mhz output */ + rc = sja1105_cgu_rmii_pll_config(priv); + if (rc < 0) + return rc; + } + /* Disable IDIV for this port */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + if (rc < 0) + return rc; + /* Source to sink mappings */ + rc = sja1105_cgu_rmii_ref_clk_config(priv, port); + if (rc < 0) + return rc; + if (role == XMII_MAC) { + rc = sja1105_cgu_rmii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +static int sja1105_pcs_read(struct sja1105_private *priv, int addr, + int devad, int regnum) +{ + return priv->mdio_pcs->read(priv->mdio_pcs, addr, devad, regnum); +} + +static int sja1105_pcs_write(struct sja1105_private *priv, int addr, + int devad, int regnum, u16 val) +{ + return priv->mdio_pcs->write(priv->mdio_pcs, addr, devad, regnum, val); +} + +/* In NXP SJA1105, the PCS is integrated with a PMA that has the TX lane + * polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain + * normal non-inverted behavior, the TX lane polarity must be inverted in the + * PCS, via the DIGITAL_CONTROL_2 register. + */ +static int sja1105_pma_config(struct sja1105_private *priv, int port) +{ + return sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, + DW_VR_MII_DIG_CTRL2, + DW_VR_MII_DIG_CTRL2_TX_POL_INV); +} + +static int sja1110_pma_config(struct sja1105_private *priv, int port) +{ + u16 txpll_fbdiv = 0x19, txpll_refdiv = 0x1; + u16 rxpll_fbdiv = 0x19, rxpll_refdiv = 0x1; + u16 rx_cdr_ctle = 0x212a; + u16 val; + int rc; + + /* Program TX PLL feedback divider and reference divider settings for + * correct oscillation frequency. + */ + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL0, + SJA1110_TXPLL_FBDIV(txpll_fbdiv)); + if (rc < 0) + return rc; + + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL1, + SJA1110_TXPLL_REFDIV(txpll_refdiv)); + if (rc < 0) + return rc; + + /* Program transmitter amplitude and disable amplitude trimming */ + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, + SJA1110_LANE_DRIVER1_0, SJA1110_TXDRV(0x5)); + if (rc < 0) + return rc; + + val = SJA1110_TXDRVTRIM_LSB(0xffffffull); + + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, + SJA1110_LANE_DRIVER2_0, val); + if (rc < 0) + return rc; + + val = SJA1110_TXDRVTRIM_MSB(0xffffffull) | SJA1110_LANE_DRIVER2_1_RSV; + + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, + SJA1110_LANE_DRIVER2_1, val); + if (rc < 0) + return rc; + + /* Enable input and output resistor terminations for low BER. */ + val = SJA1110_ACCOUPLE_RXVCM_EN | SJA1110_CDR_GAIN | + SJA1110_RXRTRIM(4) | SJA1110_RXTEN | SJA1110_TXPLL_BWSEL | + SJA1110_TXRTRIM(3) | SJA1110_TXTEN; + + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1110_LANE_TRIM, + val); + if (rc < 0) + return rc; + + /* Select PCS as transmitter data source. */ + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, + SJA1110_LANE_DATAPATH_1, 0); + if (rc < 0) + return rc; + + /* Program RX PLL feedback divider and reference divider for correct + * oscillation frequency. + */ + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL0, + SJA1110_RXPLL_FBDIV(rxpll_fbdiv)); + if (rc < 0) + return rc; + + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL1, + SJA1110_RXPLL_REFDIV(rxpll_refdiv)); + if (rc < 0) + return rc; + + /* Program threshold for receiver signal detector. + * Enable control of RXPLL by receiver signal detector to disable RXPLL + * when an input signal is not present. + */ + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, + SJA1110_RX_DATA_DETECT, 0x0005); + if (rc < 0) + return rc; + + /* Enable TX and RX PLLs and circuits. + * Release reset of PMA to enable data flow to/from PCS. + */ + rc = sja1105_pcs_read(priv, port, MDIO_MMD_VEND2, + SJA1110_POWERDOWN_ENABLE); + if (rc < 0) + return rc; + + val = rc & ~(SJA1110_TXPLL_PD | SJA1110_TXPD | SJA1110_RXCH_PD | + SJA1110_RXBIAS_PD | SJA1110_RESET_SER_EN | + SJA1110_RESET_SER | SJA1110_RESET_DES); + val |= SJA1110_RXPKDETEN | SJA1110_RCVEN; + + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, + SJA1110_POWERDOWN_ENABLE, val); + if (rc < 0) + return rc; + + /* Program continuous-time linear equalizer (CTLE) settings. */ + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1110_RX_CDR_CTLE, + rx_cdr_ctle); + if (rc < 0) + return rc; + + return 0; +} + +static int sja1105_xpcs_config_aneg_c37_sgmii(struct sja1105_private *priv, + int port) +{ + int rc; + + rc = sja1105_pcs_read(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1); + if (rc < 0) + return rc; + rc &= ~MDIO_AN_CTRL1_ENABLE; + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1, + rc); + if (rc < 0) + return rc; + + rc = sja1105_pcs_read(priv, port, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL); + if (rc < 0) + return rc; + + rc &= ~(DW_VR_MII_PCS_MODE_MASK | DW_VR_MII_TX_CONFIG_MASK); + rc |= (DW_VR_MII_PCS_MODE_C37_SGMII << + DW_VR_MII_AN_CTRL_PCS_MODE_SHIFT & + DW_VR_MII_PCS_MODE_MASK); + rc |= (DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII << + DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT & + DW_VR_MII_TX_CONFIG_MASK); + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, + rc); + if (rc < 0) + return rc; + + rc = sja1105_pcs_read(priv, port, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1); + if (rc < 0) + return rc; + + if (priv->xpcs_cfg[port].inband_an) + rc |= DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW; + else + rc &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW; + + rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, + rc); + if (rc < 0) + return rc; + + rc = sja1105_pcs_read(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1); + if (rc < 0) + return rc; + + if (priv->xpcs_cfg[port].inband_an) + rc |= MDIO_AN_CTRL1_ENABLE; + else + rc &= ~MDIO_AN_CTRL1_ENABLE; + + return sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1, rc); +} + +static int sja1105_xpcs_link_up_sgmii(struct sja1105_private *priv, int port) +{ + int val = BMCR_FULLDPLX; + + if (priv->xpcs_cfg[port].inband_an) + return 0; + + switch (priv->xpcs_cfg[port].speed) { + case SPEED_1000: + val = BMCR_SPEED1000; + break; + case SPEED_100: + val = BMCR_SPEED100; + break; + case SPEED_10: + val = BMCR_SPEED10; + break; + default: + dev_err(priv->dev, "Invalid PCS speed %d\n", + priv->xpcs_cfg[port].speed); + return -EINVAL; + } + + return sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1, val); +} + +static int sja1105_sgmii_setup(struct sja1105_private *priv, int port) +{ + int rc; + + rc = sja1105_xpcs_config_aneg_c37_sgmii(priv, port); + if (rc) + return rc; + + rc = sja1105_xpcs_link_up_sgmii(priv, port); + if (rc) + return rc; + + return priv->info->pma_config(priv, port); +} + +static int sja1105_clocking_setup_port(struct sja1105_private *priv, int port) +{ + struct sja1105_xmii_params_entry *mii; + sja1105_phy_interface_t phy_mode; + sja1105_mii_role_t role; + int rc; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + + /* RGMII etc */ + phy_mode = mii->xmii_mode[port]; + /* MAC or PHY, for applicable types (not RGMII) */ + role = mii->phy_mac[port]; + + switch (phy_mode) { + case XMII_MODE_MII: + rc = sja1105_mii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RMII: + rc = sja1105_rmii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RGMII: + rc = sja1105_rgmii_clocking_setup(priv, port, role); + break; + case XMII_MODE_SGMII: + rc = sja1105_sgmii_setup(priv, port); + break; + default: + return -EINVAL; + } + if (rc) + return rc; + + /* Internally pull down the RX_DV/CRS_DV/RX_CTL and RX_ER inputs */ + return sja1105_cfg_pad_rx_config(priv, port); +} + +static int sja1105_clocking_setup(struct sja1105_private *priv) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(priv->dev); + int port, rc; + + for (port = 0; port < pdata->num_ports; port++) { + rc = sja1105_clocking_setup_port(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +static int sja1105_pcs_mdio_read(struct mii_dev *bus, int phy, int mmd, int reg) +{ + u8 packed_buf[SJA1105_SIZE_MDIO_CMD] = {0}; + struct sja1105_private *priv = bus->priv; + const int size = SJA1105_SIZE_MDIO_CMD; + u64 addr, tmp; + int rc; + + if (mmd == MDIO_DEVAD_NONE) + return -ENODEV; + + if (!priv->info->supports_sgmii[phy]) + return -ENODEV; + + addr = (mmd << 16) | (reg & GENMASK(15, 0)); + + if (mmd != MDIO_MMD_VEND1 && mmd != MDIO_MMD_VEND2) + return 0xffff; + + rc = sja1105_xfer_buf(priv, SPI_READ, addr, packed_buf, size); + if (rc < 0) + return rc; + + sja1105_packing(packed_buf, &tmp, 31, 0, size, UNPACK); + + return tmp & 0xffff; +} + +static int sja1105_pcs_mdio_write(struct mii_dev *bus, int phy, int mmd, + int reg, u16 val) +{ + u8 packed_buf[SJA1105_SIZE_MDIO_CMD] = {0}; + struct sja1105_private *priv = bus->priv; + const int size = SJA1105_SIZE_MDIO_CMD; + u64 addr, tmp; + + if (mmd == MDIO_DEVAD_NONE) + return -ENODEV; + + if (!priv->info->supports_sgmii[phy]) + return -ENODEV; + + addr = (mmd << 16) | (reg & GENMASK(15, 0)); + tmp = val; + + if (mmd != MDIO_MMD_VEND1 && mmd != MDIO_MMD_VEND2) + return -ENODEV; + + sja1105_packing(packed_buf, &tmp, 31, 0, size, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, addr, packed_buf, size); +} + +static int sja1110_pcs_mdio_read(struct mii_dev *bus, int phy, int mmd, int reg) +{ + struct sja1105_private *priv = bus->priv; + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_MDIO_CMD] = {0}; + const int size = SJA1105_SIZE_MDIO_CMD; + int offset, bank; + u64 addr, tmp; + int rc; + + if (mmd == MDIO_DEVAD_NONE) + return -ENODEV; + + if (regs->pcs_base[phy] == SJA1105_RSV_ADDR) + return -ENODEV; + + addr = (mmd << 16) | (reg & GENMASK(15, 0)); + + bank = addr >> 8; + offset = addr & GENMASK(7, 0); + + /* This addressing scheme reserves register 0xff for the bank address + * register, so that can never be addressed. + */ + if (offset == 0xff) + return -ENODEV; + + tmp = bank; + + sja1105_packing(packed_buf, &tmp, 31, 0, size, PACK); + + rc = sja1105_xfer_buf(priv, SPI_WRITE, + regs->pcs_base[phy] + SJA1110_PCS_BANK_REG, + packed_buf, size); + if (rc < 0) + return rc; + + rc = sja1105_xfer_buf(priv, SPI_READ, regs->pcs_base[phy] + offset, + packed_buf, size); + if (rc < 0) + return rc; + + sja1105_packing(packed_buf, &tmp, 31, 0, size, UNPACK); + + return tmp & 0xffff; +} + +static int sja1110_pcs_mdio_write(struct mii_dev *bus, int phy, int mmd, + int reg, u16 val) +{ + struct sja1105_private *priv = bus->priv; + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_MDIO_CMD] = {0}; + const int size = SJA1105_SIZE_MDIO_CMD; + int offset, bank; + u64 addr, tmp; + int rc; + + if (mmd == MDIO_DEVAD_NONE) + return -ENODEV; + + if (regs->pcs_base[phy] == SJA1105_RSV_ADDR) + return -ENODEV; + + addr = (mmd << 16) | (reg & GENMASK(15, 0)); + + bank = addr >> 8; + offset = addr & GENMASK(7, 0); + + /* This addressing scheme reserves register 0xff for the bank address + * register, so that can never be addressed. + */ + if (offset == 0xff) + return -ENODEV; + + tmp = bank; + sja1105_packing(packed_buf, &tmp, 31, 0, size, PACK); + + rc = sja1105_xfer_buf(priv, SPI_WRITE, + regs->pcs_base[phy] + SJA1110_PCS_BANK_REG, + packed_buf, size); + if (rc < 0) + return rc; + + tmp = val; + sja1105_packing(packed_buf, &tmp, 31, 0, size, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pcs_base[phy] + offset, + packed_buf, size); +} + +static int sja1105_mdiobus_register(struct sja1105_private *priv) +{ + struct udevice *dev = priv->dev; + struct mii_dev *bus; + int rc; + + if (!priv->info->pcs_mdio_read || !priv->info->pcs_mdio_write) + return 0; + + bus = mdio_alloc(); + if (!bus) + return -ENOMEM; + + snprintf(bus->name, MDIO_NAME_LEN, "%s-pcs", dev->name); + bus->read = priv->info->pcs_mdio_read; + bus->write = priv->info->pcs_mdio_write; + bus->priv = priv; + + rc = mdio_register(bus); + if (rc) { + mdio_free(bus); + return rc; + } + + priv->mdio_pcs = bus; + + return 0; +} + +static void sja1105_mdiobus_unregister(struct sja1105_private *priv) +{ + if (!priv->mdio_pcs) + return; + + mdio_unregister(priv->mdio_pcs); + mdio_free(priv->mdio_pcs); +} + +static const struct sja1105_regs sja1105et_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .port_control = 0x11, + .config = 0x020000, + .rgu = 0x100440, + /* UM10944.pdf, Table 86, ACU Register overview */ + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + /* UM10944.pdf, Table 78, CGU Register overview */ + .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F}, + .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030}, + .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, + .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035}, + .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032}, + .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031}, + .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, +}; + +static const struct sja1105_regs sja1105pqrs_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .port_control = 0x12, + .config = 0x020000, + .rgu = 0x100440, + /* UM10944.pdf, Table 86, ACU Register overview */ + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809}, + .pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + /* UM11040.pdf, Table 114 */ + .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B}, + .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C}, + .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030}, + .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E}, + .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D}, + .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, +}; + +static const struct sja1105_regs sja1110_regs = { + .device_id = SJA1110_SPI_ADDR(0x0), + .prod_id = SJA1110_ACU_ADDR(0xf00), + .status = SJA1110_SPI_ADDR(0x4), + .port_control = SJA1110_SPI_ADDR(0x50), /* actually INHIB_TX */ + .config = 0x020000, + .rgu = SJA1110_RGU_ADDR(0x100), /* Reset Control Register 0 */ + /* Ports 2 and 3 are capable of xMII, but there isn't anything to + * configure in the CGU/ACU for them. + */ + .pad_mii_tx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR}, + .pad_mii_rx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR}, + .pad_mii_id = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1110_ACU_ADDR(0x18), SJA1110_ACU_ADDR(0x28), + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR}, + .rmii_pll1 = SJA1105_RSV_ADDR, + .cgu_idiv = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .mii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .mii_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .mii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .mii_ext_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .rgmii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .rmii_ref_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, + .rmii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR}, + .pcs_base = {SJA1105_RSV_ADDR, 0x1c1400, 0x1c1800, 0x1c1c00, 0x1c2000, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, + SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR}, +}; + +enum sja1105_switch_id { + SJA1105E = 0, + SJA1105T, + SJA1105P, + SJA1105Q, + SJA1105R, + SJA1105S, + SJA1110A, + SJA1110B, + SJA1110C, + SJA1110D, + SJA1105_MAX_SWITCH_ID, +}; + +static const struct sja1105_info sja1105_info[] = { + [SJA1105E] = { + .device_id = SJA1105E_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105et_table_ops, + .reset_cmd = sja1105et_reset_cmd, + .regs = &sja1105et_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .name = "SJA1105E", + }, + [SJA1105T] = { + .device_id = SJA1105T_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105et_table_ops, + .reset_cmd = sja1105et_reset_cmd, + .regs = &sja1105et_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .name = "SJA1105T", + }, + [SJA1105P] = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105P_PART_NO, + .static_ops = sja1105pqrs_table_ops, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .name = "SJA1105P", + }, + [SJA1105Q] = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105Q_PART_NO, + .static_ops = sja1105pqrs_table_ops, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .name = "SJA1105Q", + }, + [SJA1105R] = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105R_PART_NO, + .static_ops = sja1105pqrs_table_ops, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .pcs_mdio_read = sja1105_pcs_mdio_read, + .pcs_mdio_write = sja1105_pcs_mdio_write, + .pma_config = sja1105_pma_config, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .supports_sgmii = {false, false, false, false, true}, + .name = "SJA1105R", + }, + [SJA1105S] = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105S_PART_NO, + .static_ops = sja1105pqrs_table_ops, + .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .pcs_mdio_read = sja1105_pcs_mdio_read, + .pcs_mdio_write = sja1105_pcs_mdio_write, + .pma_config = sja1105_pma_config, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 3, + [SJA1105_SPEED_100MBPS] = 2, + [SJA1105_SPEED_1000MBPS] = 1, + }, + .supports_mii = {true, true, true, true, true}, + .supports_rmii = {true, true, true, true, true}, + .supports_rgmii = {true, true, true, true, true}, + .supports_sgmii = {false, false, false, false, true}, + .name = "SJA1105S", + }, + [SJA1110A] = { + .device_id = SJA1110_DEVICE_ID, + .part_no = SJA1110A_PART_NO, + .static_ops = sja1110_table_ops, + .setup_rgmii_delay = sja1110_setup_rgmii_delay, + .reset_cmd = sja1110_reset_cmd, + .regs = &sja1110_regs, + .pcs_mdio_read = sja1110_pcs_mdio_read, + .pcs_mdio_write = sja1110_pcs_mdio_write, + .pma_config = sja1110_pma_config, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 4, + [SJA1105_SPEED_100MBPS] = 3, + [SJA1105_SPEED_1000MBPS] = 2, + }, + .supports_mii = {true, true, true, true, false, + true, true, true, true, true, true}, + .supports_rmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_rgmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_sgmii = {false, true, true, true, true, + false, false, false, false, false, false}, + .name = "SJA1110A", + }, + [SJA1110B] = { + .device_id = SJA1110_DEVICE_ID, + .part_no = SJA1110B_PART_NO, + .static_ops = sja1110_table_ops, + .setup_rgmii_delay = sja1110_setup_rgmii_delay, + .reset_cmd = sja1110_reset_cmd, + .regs = &sja1110_regs, + .pcs_mdio_read = sja1110_pcs_mdio_read, + .pcs_mdio_write = sja1110_pcs_mdio_write, + .pma_config = sja1110_pma_config, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 4, + [SJA1105_SPEED_100MBPS] = 3, + [SJA1105_SPEED_1000MBPS] = 2, + }, + .supports_mii = {true, true, true, true, false, + true, true, true, true, true, false}, + .supports_rmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_rgmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_sgmii = {false, false, false, true, true, + false, false, false, false, false, false}, + .name = "SJA1110B", + }, + [SJA1110C] = { + .device_id = SJA1110_DEVICE_ID, + .part_no = SJA1110C_PART_NO, + .static_ops = sja1110_table_ops, + .setup_rgmii_delay = sja1110_setup_rgmii_delay, + .reset_cmd = sja1110_reset_cmd, + .regs = &sja1110_regs, + .pcs_mdio_read = sja1110_pcs_mdio_read, + .pcs_mdio_write = sja1110_pcs_mdio_write, + .pma_config = sja1110_pma_config, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 4, + [SJA1105_SPEED_100MBPS] = 3, + [SJA1105_SPEED_1000MBPS] = 2, + }, + .supports_mii = {true, true, true, true, false, + true, true, true, false, false, false}, + .supports_rmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_rgmii = {false, false, true, true, false, + false, false, false, false, false, false}, + .supports_sgmii = {false, false, false, false, true, + false, false, false, false, false, false}, + .name = "SJA1110C", + }, + [SJA1110D] = { + .device_id = SJA1110_DEVICE_ID, + .part_no = SJA1110D_PART_NO, + .static_ops = sja1110_table_ops, + .setup_rgmii_delay = sja1110_setup_rgmii_delay, + .reset_cmd = sja1110_reset_cmd, + .regs = &sja1110_regs, + .pcs_mdio_read = sja1110_pcs_mdio_read, + .pcs_mdio_write = sja1110_pcs_mdio_write, + .pma_config = sja1110_pma_config, + .port_speed = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 4, + [SJA1105_SPEED_100MBPS] = 3, + [SJA1105_SPEED_1000MBPS] = 2, + }, + .supports_mii = {true, false, true, false, false, + true, true, true, false, false, false}, + .supports_rmii = {false, false, true, false, false, + false, false, false, false, false, false}, + .supports_rgmii = {false, false, true, false, false, + false, false, false, false, false, false}, + .supports_sgmii = {false, true, true, true, true, + false, false, false, false, false, false}, + .name = "SJA1110D", + }, +}; + +struct sja1105_status { + u64 configs; + u64 crcchkl; + u64 ids; + u64 crcchkg; +}; + +static void sja1105_status_unpack(void *buf, struct sja1105_status *status) +{ + sja1105_packing(buf, &status->configs, 31, 31, 4, UNPACK); + sja1105_packing(buf, &status->crcchkl, 30, 30, 4, UNPACK); + sja1105_packing(buf, &status->ids, 29, 29, 4, UNPACK); + sja1105_packing(buf, &status->crcchkg, 28, 28, 4, UNPACK); +} + +static int sja1105_status_get(struct sja1105_private *priv, + struct sja1105_status *status) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[4]; + int rc; + + rc = sja1105_xfer_buf(priv, SPI_READ, regs->status, packed_buf, 4); + if (rc < 0) + return rc; + + sja1105_status_unpack(packed_buf, status); + + return 0; +} + +/* Not const because unpacking priv->static_config into buffers and preparing + * for upload requires the recalculation of table CRCs and updating the + * structures with these. + */ +static int +static_config_buf_prepare_for_upload(struct sja1105_private *priv, + void *config_buf, int buf_len) +{ + struct sja1105_static_config *config = &priv->static_config; + struct sja1105_table_header final_header; + char *final_header_ptr; + int crc_len; + + /* Write Device ID and config tables to config_buf */ + sja1105_static_config_pack(config_buf, config); + /* Recalculate CRC of the last header (right now 0xDEADBEEF). + * Don't include the CRC field itself. + */ + crc_len = buf_len - 4; + /* Read the whole table header */ + final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER; + sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK); + /* Modify */ + final_header.crc = sja1105_crc32(config_buf, crc_len); + /* Rewrite */ + sja1105_table_header_packing(final_header_ptr, &final_header, PACK); + + return 0; +} + +static int sja1105_static_config_upload(struct sja1105_private *priv) +{ + struct sja1105_static_config *config = &priv->static_config; + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_status status; + u8 *config_buf; + int buf_len; + int rc; + + buf_len = sja1105_static_config_get_length(config); + config_buf = calloc(buf_len, sizeof(char)); + if (!config_buf) + return -ENOMEM; + + rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len); + if (rc < 0) { + printf("Invalid config, cannot upload\n"); + rc = -EINVAL; + goto out; + } + /* Put the SJA1105 in programming mode */ + rc = priv->info->reset_cmd(priv); + if (rc < 0) { + printf("Failed to reset switch\n"); + goto out; + } + /* Wait for the switch to come out of reset */ + udelay(1000); + /* Upload the static config to the device */ + rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->config, + config_buf, buf_len); + if (rc < 0) { + printf("Failed to upload config\n"); + goto out; + } + /* Check that SJA1105 responded well to the config upload */ + rc = sja1105_status_get(priv, &status); + if (rc < 0) + goto out; + + if (status.ids == 1) { + printf("Mismatch between hardware and static config device id. " + "Wrote 0x%llx, wants 0x%llx\n", + config->device_id, priv->info->device_id); + rc = -EIO; + goto out; + } + if (status.crcchkl == 1 || status.crcchkg == 1) { + printf("Switch reported invalid CRC on static config\n"); + rc = -EIO; + goto out; + } + if (status.configs == 0) { + printf("Switch reported that config is invalid\n"); + rc = -EIO; + goto out; + } + +out: + free(config_buf); + return rc; +} + +static int sja1105_static_config_reload(struct sja1105_private *priv) +{ + int rc; + + rc = sja1105_static_config_upload(priv); + if (rc < 0) { + printf("Failed to load static config: %d\n", rc); + return rc; + } + + /* Configure the CGU (PHY link modes and speeds) */ + rc = sja1105_clocking_setup(priv); + if (rc < 0) { + printf("Failed to configure MII clocking: %d\n", rc); + return rc; + } + + return 0; +} + +static int sja1105_port_probe(struct udevice *dev, int port, + struct phy_device *phy) +{ + struct sja1105_private *priv = dev_get_priv(dev); + ofnode node = dsa_port_get_ofnode(dev, port); + phy_interface_t phy_mode = phy->interface; + + priv->xpcs_cfg[port].inband_an = ofnode_eth_uses_inband_aneg(node); + + if (phy_mode == PHY_INTERFACE_MODE_MII || + phy_mode == PHY_INTERFACE_MODE_RMII) { + phy->supported &= PHY_BASIC_FEATURES; + phy->advertising &= PHY_BASIC_FEATURES; + } else { + phy->supported &= PHY_GBIT_FEATURES; + phy->advertising &= PHY_GBIT_FEATURES; + } + + return phy_config(phy); +} + +static int sja1105_port_enable(struct udevice *dev, int port, + struct phy_device *phy) +{ + struct sja1105_private *priv = dev_get_priv(dev); + phy_interface_t phy_mode = phy->interface; + struct sja1105_xmii_params_entry *mii; + struct sja1105_mac_config_entry *mac; + int rc; + + rc = phy_startup(phy); + if (rc) + return rc; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + switch (phy_mode) { + case PHY_INTERFACE_MODE_MII: + if (!priv->info->supports_mii[port]) + goto unsupported; + + mii->xmii_mode[port] = XMII_MODE_MII; + break; + case PHY_INTERFACE_MODE_RMII: + if (!priv->info->supports_rmii[port]) + goto unsupported; + + mii->xmii_mode[port] = XMII_MODE_RMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + if (!priv->info->supports_rgmii[port]) + goto unsupported; + + mii->xmii_mode[port] = XMII_MODE_RGMII; + break; + case PHY_INTERFACE_MODE_SGMII: + if (!priv->info->supports_sgmii[port]) + goto unsupported; + + mii->xmii_mode[port] = XMII_MODE_SGMII; + mii->special[port] = true; + break; +unsupported: + default: + dev_err(dev, "Unsupported PHY mode %d on port %d!\n", + phy_mode, port); + return -EINVAL; + } + + /* RevMII, RevRMII not supported */ + mii->phy_mac[port] = XMII_MAC; + + /* Let the PHY handle the RGMII delays, if present. */ + if (phy->phy_id == PHY_FIXED_ID) { + if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID || + phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + priv->rgmii_rx_delay[port] = true; + + if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID || + phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + priv->rgmii_tx_delay[port] = true; + + if ((priv->rgmii_rx_delay[port] || + priv->rgmii_tx_delay[port]) && + !priv->info->setup_rgmii_delay) { + printf("Chip does not support internal RGMII delays\n"); + return -EINVAL; + } + } + + if (mii->xmii_mode[port] == XMII_MODE_SGMII) { + mac[port].speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS]; + priv->xpcs_cfg[port].speed = phy->speed; + } else if (phy->speed == SPEED_1000) { + mac[port].speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS]; + } else if (phy->speed == SPEED_100) { + mac[port].speed = priv->info->port_speed[SJA1105_SPEED_100MBPS]; + } else if (phy->speed == SPEED_10) { + mac[port].speed = priv->info->port_speed[SJA1105_SPEED_10MBPS]; + } else { + printf("Invalid PHY speed %d on port %d\n", phy->speed, port); + return -EINVAL; + } + + return sja1105_static_config_reload(priv); +} + +static void sja1105_port_disable(struct udevice *dev, int port, + struct phy_device *phy) +{ + phy_shutdown(phy); +} + +static int sja1105_xmit(struct udevice *dev, int port, void *packet, int length) +{ + struct sja1105_private *priv = dev_get_priv(dev); + u8 *from = (u8 *)packet + VLAN_HLEN; + struct vlan_ethhdr *hdr = packet; + u8 *dest = (u8 *)packet; + + memmove(dest, from, 2 * ETH_ALEN); + hdr->h_vlan_proto = htons(ETH_P_SJA1105); + hdr->h_vlan_TCI = htons(priv->pvid[port]); + + return 0; +} + +static int sja1105_rcv(struct udevice *dev, int *port, void *packet, int length) +{ + struct vlan_ethhdr *hdr = packet; + u8 *dest = packet + VLAN_HLEN; + u8 *from = packet; + + if (ntohs(hdr->h_vlan_proto) != ETH_P_SJA1105) + return -EINVAL; + + *port = ntohs(hdr->h_vlan_TCI) & DSA_8021Q_PORT_MASK; + memmove(dest, from, 2 * ETH_ALEN); + + return 0; +} + +static const struct dsa_ops sja1105_dsa_ops = { + .port_probe = sja1105_port_probe, + .port_enable = sja1105_port_enable, + .port_disable = sja1105_port_disable, + .xmit = sja1105_xmit, + .rcv = sja1105_rcv, +}; + +static int sja1105_init(struct sja1105_private *priv) +{ + int rc; + + rc = sja1105_static_config_init(priv); + if (rc) { + printf("Failed to initialize static config: %d\n", rc); + return rc; + } + + rc = sja1105_mdiobus_register(priv); + if (rc) { + printf("Failed to register MDIO bus: %d\n", rc); + goto err_mdiobus_register; + } + + return 0; + +err_mdiobus_register: + sja1105_static_config_free(&priv->static_config); + + return rc; +} + +static int sja1105_check_device_id(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_DEVICE_ID] = {0}; + enum sja1105_switch_id id; + u64 device_id; + u64 part_no; + int rc; + + rc = sja1105_xfer_buf(priv, SPI_READ, regs->device_id, packed_buf, + SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + sja1105_packing(packed_buf, &device_id, 31, 0, SJA1105_SIZE_DEVICE_ID, + UNPACK); + + if (device_id != priv->info->device_id) { + printf("Expected device ID 0x%llx but read 0x%llx\n", + priv->info->device_id, device_id); + return -ENODEV; + } + + rc = sja1105_xfer_buf(priv, SPI_READ, regs->prod_id, packed_buf, + SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + sja1105_packing(packed_buf, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID, + UNPACK); + + for (id = 0; id < SJA1105_MAX_SWITCH_ID; id++) { + const struct sja1105_info *info = &sja1105_info[id]; + + /* Is what's been probed in our match table at all? */ + if (info->device_id != device_id || info->part_no != part_no) + continue; + + /* But is it what's in the device tree? */ + if (priv->info->device_id != device_id || + priv->info->part_no != part_no) { + printf("Device tree specifies chip %s but found %s, please fix it!\n", + priv->info->name, info->name); + /* It isn't. No problem, pick that up. */ + priv->info = info; + } + + return 0; + } + + printf("Unexpected {device ID, part number}: 0x%llx 0x%llx\n", + device_id, part_no); + + return -ENODEV; +} + +static int sja1105_probe(struct udevice *dev) +{ + enum sja1105_switch_id id = dev_get_driver_data(dev); + struct sja1105_private *priv = dev_get_priv(dev); + int rc; + + if (ofnode_valid(dev_ofnode(dev)) && + !ofnode_is_available(dev_ofnode(dev))) { + dev_dbg(dev, "switch disabled\n"); + return -ENODEV; + } + + priv->info = &sja1105_info[id]; + priv->dev = dev; + + rc = sja1105_check_device_id(priv); + if (rc < 0) { + dev_err(dev, "Device ID check failed: %d\n", rc); + return rc; + } + + dsa_set_tagging(dev, VLAN_HLEN, 0); + + return sja1105_init(priv); +} + +static int sja1105_remove(struct udevice *dev) +{ + struct sja1105_private *priv = dev_get_priv(dev); + + sja1105_mdiobus_unregister(priv); + sja1105_static_config_free(&priv->static_config); + + return 0; +} + +static const struct udevice_id sja1105_ids[] = { + { .compatible = "nxp,sja1105e", .data = SJA1105E }, + { .compatible = "nxp,sja1105t", .data = SJA1105T }, + { .compatible = "nxp,sja1105p", .data = SJA1105P }, + { .compatible = "nxp,sja1105q", .data = SJA1105Q }, + { .compatible = "nxp,sja1105r", .data = SJA1105R }, + { .compatible = "nxp,sja1105s", .data = SJA1105S }, + { .compatible = "nxp,sja1110a", .data = SJA1110A }, + { .compatible = "nxp,sja1110b", .data = SJA1110B }, + { .compatible = "nxp,sja1110c", .data = SJA1110C }, + { .compatible = "nxp,sja1110d", .data = SJA1110D }, + { } +}; + +U_BOOT_DRIVER(sja1105) = { + .name = "sja1105", + .id = UCLASS_DSA, + .of_match = sja1105_ids, + .probe = sja1105_probe, + .remove = sja1105_remove, + .ops = &sja1105_dsa_ops, + .priv_auto = sizeof(struct sja1105_private), +}; diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 0ce9765..beca886 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -156,6 +156,19 @@ static int tsec_mcast_addr(struct udevice *dev, const u8 *mcast_mac, int join) return 0; } +static int __maybe_unused tsec_set_promisc(struct udevice *dev, bool enable) +{ + struct tsec_private *priv = dev_get_priv(dev); + struct tsec __iomem *regs = priv->regs; + + if (enable) + setbits_be32(®s->rctrl, RCTRL_PROM); + else + clrbits_be32(®s->rctrl, RCTRL_PROM); + + return 0; +} + /* * Initialized required registers to appropriate values, zeroing * those we don't care about (unless zero is bad, in which case, @@ -186,8 +199,6 @@ static void init_registers(struct tsec __iomem *regs) out_be32(®s->hash.gaddr6, 0); out_be32(®s->hash.gaddr7, 0); - out_be32(®s->rctrl, 0x00000000); - /* Init RMON mib registers */ memset((void *)®s->rmon, 0, sizeof(regs->rmon)); @@ -432,7 +443,7 @@ static void tsec_halt(struct udevice *dev) * of the eTSEC port initialization sequence, * the eTSEC Rx logic may not be properly initialized. */ -void redundant_init(struct tsec_private *priv) +static void redundant_init(struct tsec_private *priv) { struct tsec __iomem *regs = priv->regs; uint t, count = 0; @@ -454,7 +465,7 @@ void redundant_init(struct tsec_private *priv) 0x71, 0x72}; /* Enable promiscuous mode */ - setbits_be32(®s->rctrl, 0x8); + setbits_be32(®s->rctrl, RCTRL_PROM); /* Enable loopback mode */ setbits_be32(®s->maccfg1, MACCFG1_LOOPBACK); /* Enable transmit and receive */ @@ -506,7 +517,7 @@ void redundant_init(struct tsec_private *priv) if (fail) panic("eTSEC init fail!\n"); /* Disable promiscuous mode */ - clrbits_be32(®s->rctrl, 0x8); + clrbits_be32(®s->rctrl, RCTRL_PROM); /* Disable loopback mode */ clrbits_be32(®s->maccfg1, MACCFG1_LOOPBACK); } @@ -932,6 +943,7 @@ static const struct eth_ops tsec_ops = { .free_pkt = tsec_free_pkt, .stop = tsec_halt, .mcast = tsec_mcast_addr, + .set_promisc = tsec_set_promisc, }; static struct tsec_data etsec2_data = { diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index cc139af..42f8cb6 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -19,6 +19,12 @@ config DM_PCI_COMPAT measure when porting a board to use driver model for PCI. Once the board is fully supported, this option should be disabled. +config SYS_PCI_64BIT + bool "Enable 64-bit PCI resources" + default y if PPC + help + Enable 64-bit PCI resource access. + config PCI_AARDVARK bool "Enable Aardvark PCIe driver" depends on DM_GPIO diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 4a131bf..04f6236 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_PCI) += pci_auto_common.o pci_common.o obj-$(CONFIG_PCIE_ECAM_GENERIC) += pcie_ecam_generic.o obj-$(CONFIG_PCIE_ECAM_SYNQUACER) += pcie_ecam_synquacer.o -obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o obj-$(CONFIG_PCI_MPC85XX) += pci_mpc85xx.o obj-$(CONFIG_PCI_MSC01) += pci_msc01.o diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c deleted file mode 100644 index c544af2..0000000 --- a/drivers/pci/fsl_pci_init.c +++ /dev/null @@ -1,936 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007-2012 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <env.h> -#include <init.h> -#include <log.h> -#include <malloc.h> -#include <asm/fsl_serdes.h> -#include <asm/global_data.h> -#include <linux/delay.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's - * - * Initialize controller and call the common driver/pci pci_hose_scan to - * scan for bridges and devices. - * - * Hose fields which need to be pre-initialized by board specific code: - * regions[] - * first_busno - * - * Fields updated: - * last_busno - */ - -#include <pci.h> -#include <asm/io.h> -#include <asm/fsl_pci.h> - -#define MAX_PCI_REGIONS 7 - -#ifndef CONFIG_SYS_PCI_MEMORY_BUS -#define CONFIG_SYS_PCI_MEMORY_BUS 0 -#endif - -#ifndef CONFIG_SYS_PCI_MEMORY_PHYS -#define CONFIG_SYS_PCI_MEMORY_PHYS 0 -#endif - -#if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS) -#define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024) -#endif - -/* Setup one inbound ATMU window. - * - * We let the caller decide what the window size should be - */ -static void set_inbound_window(volatile pit_t *pi, - struct pci_region *r, - u64 size) -{ - u32 sz = (__ilog2_u64(size) - 1); -#ifdef CONFIG_SYS_FSL_ERRATUM_A005434 - u32 flag = 0; -#else - u32 flag = PIWAR_LOCAL; -#endif - - flag |= PIWAR_EN | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; - - out_be32(&pi->pitar, r->phys_start >> 12); - out_be32(&pi->piwbar, r->bus_start >> 12); -#ifdef CONFIG_SYS_PCI_64BIT - out_be32(&pi->piwbear, r->bus_start >> 44); -#else - out_be32(&pi->piwbear, 0); -#endif - if (r->flags & PCI_REGION_PREFETCH) - flag |= PIWAR_PF; - out_be32(&pi->piwar, flag | sz); -} - -int fsl_setup_hose(struct pci_controller *hose, unsigned long addr) -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr; - - /* Reset hose to make sure its in a clean state */ - memset(hose, 0, sizeof(struct pci_controller)); - - hose->regions = (struct pci_region *) - calloc(1, MAX_PCI_REGIONS * sizeof(struct pci_region)); - - pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - return fsl_is_pci_agent(hose); -} - -static int fsl_pci_setup_inbound_windows(struct pci_controller *hose, - u64 out_lo, u8 pcie_cap, - volatile pit_t *pi) -{ - struct pci_region *r = hose->regions + hose->region_count; - u64 sz = min((u64)gd->ram_size, (1ull << 32)); - - phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS; - pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS; - pci_size_t pci_sz; - - /* we have no space available for inbound memory mapping */ - if (bus_start > out_lo) { - printf ("no space for inbound mapping of memory\n"); - return 0; - } - - /* limit size */ - if ((bus_start + sz) > out_lo) { - sz = out_lo - bus_start; - debug ("limiting size to %llx\n", sz); - } - - pci_sz = 1ull << __ilog2_u64(sz); - /* - * we can overlap inbound/outbound windows on PCI-E since RX & TX - * links a separate - */ - if ((pcie_cap == PCI_CAP_ID_EXP) && (pci_sz < sz)) { - debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n", - (u64)bus_start, (u64)phys_start, (u64)sz); - pci_set_region(r, bus_start, phys_start, sz, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | - PCI_REGION_PREFETCH); - - /* if we aren't an exact power of two match, pci_sz is smaller - * round it up to the next power of two. We report the actual - * size to pci region tracking. - */ - if (pci_sz != sz) - sz = 2ull << __ilog2_u64(sz); - - set_inbound_window(pi--, r++, sz); - sz = 0; /* make sure we dont set the R2 window */ - } else { - debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n", - (u64)bus_start, (u64)phys_start, (u64)pci_sz); - pci_set_region(r, bus_start, phys_start, pci_sz, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | - PCI_REGION_PREFETCH); - set_inbound_window(pi--, r++, pci_sz); - - sz -= pci_sz; - bus_start += pci_sz; - phys_start += pci_sz; - - pci_sz = 1ull << __ilog2_u64(sz); - if (sz) { - debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n", - (u64)bus_start, (u64)phys_start, (u64)pci_sz); - pci_set_region(r, bus_start, phys_start, pci_sz, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | - PCI_REGION_PREFETCH); - set_inbound_window(pi--, r++, pci_sz); - sz -= pci_sz; - bus_start += pci_sz; - phys_start += pci_sz; - } - } - -#if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT) - /* - * On 64-bit capable systems, set up a mapping for all of DRAM - * in high pci address space. - */ - pci_sz = 1ull << __ilog2_u64(gd->ram_size); - /* round up to the next largest power of two */ - if (gd->ram_size > pci_sz) - pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1); - debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n", - (u64)CONFIG_SYS_PCI64_MEMORY_BUS, - (u64)CONFIG_SYS_PCI_MEMORY_PHYS, - (u64)pci_sz); - pci_set_region(r, - CONFIG_SYS_PCI64_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - pci_sz, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | - PCI_REGION_PREFETCH); - set_inbound_window(pi--, r++, pci_sz); -#else - pci_sz = 1ull << __ilog2_u64(sz); - if (sz) { - debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n", - (u64)bus_start, (u64)phys_start, (u64)pci_sz); - pci_set_region(r, bus_start, phys_start, pci_sz, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | - PCI_REGION_PREFETCH); - sz -= pci_sz; - bus_start += pci_sz; - phys_start += pci_sz; - set_inbound_window(pi--, r++, pci_sz); - } -#endif - -#ifdef CONFIG_PHYS_64BIT - if (sz && (((u64)gd->ram_size) < (1ull << 32))) - printf("Was not able to map all of memory via " - "inbound windows -- %lld remaining\n", sz); -#endif - - hose->region_count = r - hose->regions; - - return 1; -} - -#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER -static void fsl_pcie_boot_master(pit_t *pi) -{ - /* configure inbound window for slave's u-boot image */ - debug("PCIEBOOT - MASTER: Inbound window for slave's image; " - "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", - (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, - (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1, - CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); - struct pci_region r_inbound; - u32 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE) - - 1; - pci_set_region(&r_inbound, - CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1, - CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, - sz_inbound, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - set_inbound_window(pi--, &r_inbound, - CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); - - /* configure inbound window for slave's u-boot image */ - debug("PCIEBOOT - MASTER: Inbound window for slave's image; " - "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", - (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, - (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2, - CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); - pci_set_region(&r_inbound, - CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2, - CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, - sz_inbound, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - set_inbound_window(pi--, &r_inbound, - CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); - - /* configure inbound window for slave's ucode and ENV */ - debug("PCIEBOOT - MASTER: Inbound window for slave's " - "ucode and ENV; " - "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", - (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS, - (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS, - CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE); - sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE) - - 1; - pci_set_region(&r_inbound, - CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS, - CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS, - sz_inbound, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - set_inbound_window(pi--, &r_inbound, - CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE); -} - -static void fsl_pcie_boot_master_release_slave(int port) -{ - unsigned long release_addr; - - /* now release slave's core 0 */ - switch (port) { - case 1: - release_addr = CONFIG_SYS_PCIE1_MEM_VIRT - + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; - break; -#ifdef CONFIG_SYS_PCIE2_MEM_VIRT - case 2: - release_addr = CONFIG_SYS_PCIE2_MEM_VIRT - + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; - break; -#endif -#ifdef CONFIG_SYS_PCIE3_MEM_VIRT - case 3: - release_addr = CONFIG_SYS_PCIE3_MEM_VIRT - + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; - break; -#endif - default: - release_addr = 0; - break; - } - if (release_addr != 0) { - out_be32((void *)release_addr, - CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK); - debug("PCIEBOOT - MASTER: " - "Release slave successfully! Now the slave should start up!\n"); - } else { - debug("PCIEBOOT - MASTER: " - "Release slave failed!\n"); - } -} -#endif - -void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) -{ - u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr; - u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data; - u16 temp16; - u32 temp32; - u32 block_rev; - int enabled, r, inbound = 0; - u16 ltssm; - u8 temp8, pcie_cap; - int pcie_cap_pos; - int pci_dcr; - int pci_dsr; - int pci_lsr; - -#if defined(CONFIG_FSL_PCIE_DISABLE_ASPM) - int pci_lcr; -#endif - - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)cfg_addr; - struct pci_region *reg = hose->regions + hose->region_count; - pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); - - /* Initialize ATMU registers based on hose regions and flags */ - volatile pot_t *po = &pci->pot[1]; /* skip 0 */ - volatile pit_t *pi; - - u64 out_hi = 0, out_lo = -1ULL; - u32 pcicsrbar, pcicsrbar_sz; - - pci_setup_indirect(hose, cfg_addr, cfg_data); - -#ifdef PEX_CCB_DIV - /* Configure the PCIE controller core clock ratio */ - pci_hose_write_config_dword(hose, dev, 0x440, - ((gd->bus_clk / 1000000) * - (16 / PEX_CCB_DIV)) / 333); -#endif - block_rev = in_be32(&pci->block_rev1); - if (PEX_IP_BLK_REV_2_2 <= block_rev) { - pi = &pci->pit[2]; /* 0xDC0 */ - } else { - pi = &pci->pit[3]; /* 0xDE0 */ - } - - /* Handle setup of outbound windows first */ - for (r = 0; r < hose->region_count; r++) { - unsigned long flags = hose->regions[r].flags; - u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1); - - flags &= PCI_REGION_SYS_MEMORY|PCI_REGION_TYPE; - if (flags != PCI_REGION_SYS_MEMORY) { - u64 start = hose->regions[r].bus_start; - u64 end = start + hose->regions[r].size; - - out_be32(&po->powbar, hose->regions[r].phys_start >> 12); - out_be32(&po->potar, start >> 12); -#ifdef CONFIG_SYS_PCI_64BIT - out_be32(&po->potear, start >> 44); -#else - out_be32(&po->potear, 0); -#endif - if (hose->regions[r].flags & PCI_REGION_IO) { - out_be32(&po->powar, POWAR_EN | sz | - POWAR_IO_READ | POWAR_IO_WRITE); - } else { - out_be32(&po->powar, POWAR_EN | sz | - POWAR_MEM_READ | POWAR_MEM_WRITE); - out_lo = min(start, out_lo); - out_hi = max(end, out_hi); - } - po++; - } - } - debug("Outbound memory range: %llx:%llx\n", out_lo, out_hi); - - /* setup PCSRBAR/PEXCSRBAR */ - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff); - pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pcicsrbar_sz); - pcicsrbar_sz = ~pcicsrbar_sz + 1; - - if (out_hi < (0x100000000ull - pcicsrbar_sz) || - (out_lo > 0x100000000ull)) - pcicsrbar = 0x100000000ull - pcicsrbar_sz; - else - pcicsrbar = (out_lo - pcicsrbar_sz) & -pcicsrbar_sz; - pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, pcicsrbar); - - out_lo = min(out_lo, (u64)pcicsrbar); - - debug("PCICSRBAR @ 0x%x\n", pcicsrbar); - - pci_set_region(reg++, pcicsrbar, CONFIG_SYS_CCSRBAR_PHYS, - pcicsrbar_sz, PCI_REGION_SYS_MEMORY); - hose->region_count++; - - /* see if we are a PCIe or PCI controller */ - pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); - pci_dcr = pcie_cap_pos + 0x08; - pci_dsr = pcie_cap_pos + 0x0a; - pci_lsr = pcie_cap_pos + 0x12; - - pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); - -#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER - /* boot from PCIE --master */ - char *s = env_get("bootmaster"); - char pcie[6]; - sprintf(pcie, "PCIE%d", pci_info->pci_num); - - if (s && (strcmp(s, pcie) == 0)) { - debug("PCIEBOOT - MASTER: Master port [ %d ] for pcie boot.\n", - pci_info->pci_num); - fsl_pcie_boot_master((pit_t *)pi); - } else { - /* inbound */ - inbound = fsl_pci_setup_inbound_windows(hose, - out_lo, pcie_cap, pi); - } -#else - /* inbound */ - inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi); -#endif - - for (r = 0; r < hose->region_count; r++) - debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", r, - (u64)hose->regions[r].phys_start, - (u64)hose->regions[r].bus_start, - (u64)hose->regions[r].size, - hose->regions[r].flags); - - pci_register_hose(hose); - pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */ - hose->current_busno = hose->first_busno; - - out_be32(&pci->pedr, 0xffffffff); /* Clear any errors */ - out_be32(&pci->peer, ~0x20140); /* Enable All Error Interrupts except - * - Master abort (pci) - * - Master PERR (pci) - * - ICCA (PCIe) - */ - pci_hose_read_config_dword(hose, dev, pci_dcr, &temp32); - temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */ - pci_hose_write_config_dword(hose, dev, pci_dcr, temp32); - -#if defined(CONFIG_FSL_PCIE_DISABLE_ASPM) - pci_lcr = pcie_cap_pos + 0x10; - temp32 = 0; - pci_hose_read_config_dword(hose, dev, pci_lcr, &temp32); - temp32 &= ~0x03; /* Disable ASPM */ - pci_hose_write_config_dword(hose, dev, pci_lcr, temp32); - udelay(1); -#endif - if (pcie_cap == PCI_CAP_ID_EXP) { - if (block_rev >= PEX_IP_BLK_REV_3_0) { -#define PEX_CSR0_LTSSM_MASK 0xFC -#define PEX_CSR0_LTSSM_SHIFT 2 - ltssm = (in_be32(&pci->pex_csr0) - & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT; - enabled = (ltssm == 0x11) ? 1 : 0; -#ifdef CONFIG_FSL_PCIE_RESET - int i; - /* assert PCIe reset */ - setbits_be32(&pci->pdb_stat, 0x08000000); - (void) in_be32(&pci->pdb_stat); - udelay(1000); - /* clear PCIe reset */ - clrbits_be32(&pci->pdb_stat, 0x08000000); - asm("sync;isync"); - for (i = 0; i < 100 && ltssm < PCI_LTSSM_L0; i++) { - pci_hose_read_config_word(hose, dev, PCI_LTSSM, - <ssm); - udelay(1000); - } -#endif - } else { - /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); */ - /* enabled = ltssm >= PCI_LTSSM_L0; */ - pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); - enabled = ltssm >= PCI_LTSSM_L0; - -#ifdef CONFIG_FSL_PCIE_RESET - if (ltssm == 1) { - int i; - debug("....PCIe link error. " "LTSSM=0x%02x.", ltssm); - /* assert PCIe reset */ - setbits_be32(&pci->pdb_stat, 0x08000000); - (void) in_be32(&pci->pdb_stat); - udelay(100); - debug(" Asserting PCIe reset @%p = %x\n", - &pci->pdb_stat, in_be32(&pci->pdb_stat)); - /* clear PCIe reset */ - clrbits_be32(&pci->pdb_stat, 0x08000000); - asm("sync;isync"); - for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) { - pci_hose_read_config_word(hose, dev, PCI_LTSSM, - <ssm); - udelay(1000); - debug("....PCIe link error. " - "LTSSM=0x%02x.\n", ltssm); - } - enabled = ltssm >= PCI_LTSSM_L0; - - /* we need to re-write the bar0 since a reset will - * clear it - */ - pci_hose_write_config_dword(hose, dev, - PCI_BASE_ADDRESS_0, pcicsrbar); - } -#endif - } - -#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 - if (enabled == 0) { - serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; - temp32 = in_be32(&srds_regs->srdspccr0); - - if ((temp32 >> 28) == 3) { - int i; - - out_be32(&srds_regs->srdspccr0, 2 << 28); - setbits_be32(&pci->pdb_stat, 0x08000000); - in_be32(&pci->pdb_stat); - udelay(100); - clrbits_be32(&pci->pdb_stat, 0x08000000); - asm("sync;isync"); - for (i=0; i < 100 && ltssm < PCI_LTSSM_L0; i++) { - pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); - udelay(1000); - } - enabled = ltssm >= PCI_LTSSM_L0; - } - } -#endif - if (!enabled) { - /* Let the user know there's no PCIe link for root - * complex. for endpoint, the link may not setup, so - * print undetermined. - */ - if (fsl_is_pci_agent(hose)) - printf("undetermined, regs @ 0x%lx\n", pci_info->regs); - else - printf("no link, regs @ 0x%lx\n", pci_info->regs); - hose->last_busno = hose->first_busno; - return; - } - - out_be32(&pci->pme_msg_det, 0xffffffff); - out_be32(&pci->pme_msg_int_en, 0xffffffff); - - /* Print the negotiated PCIe link width */ - pci_hose_read_config_word(hose, dev, pci_lsr, &temp16); - printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4, - (temp16 & 0xf), pci_info->regs); - - hose->current_busno++; /* Start scan with secondary */ - pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); - } - -#ifdef CONFIG_SYS_FSL_ERRATUM_A007815 - /* The Read-Only Write Enable bit defaults to 1 instead of 0. - * Set to 0 to protect the read-only registers. - */ - clrbits_be32(&pci->dbi_ro_wr_en, 0x01); -#endif - - /* Use generic setup_device to initialize standard pci regs, - * but do not allocate any windows since any BAR found (such - * as PCSRBAR) is not in this cpu's memory space. - */ - pciauto_setup_device(hose, dev, 0, hose->pci_mem, - hose->pci_prefetch, hose->pci_io); - - if (inbound) { - pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16); - pci_hose_write_config_word(hose, dev, PCI_COMMAND, - temp16 | PCI_COMMAND_MEMORY); - } - -#ifndef CONFIG_PCI_NOSCAN - if (!fsl_is_pci_agent(hose)) { - debug(" Scanning PCI bus %02x\n", - hose->current_busno); - hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno); - } else { - debug(" Not scanning PCI bus %02x. PI=%x\n", - hose->current_busno, temp8); - hose->last_busno = hose->current_busno; - } - - /* if we are PCIe - update limit regs and subordinate busno - * for the virtual P2P bridge - */ - if (pcie_cap == PCI_CAP_ID_EXP) { - pciauto_postscan_setup_bridge(hose, dev, hose->last_busno); - } -#else - hose->last_busno = hose->current_busno; -#endif - - /* Clear all error indications */ - if (pcie_cap == PCI_CAP_ID_EXP) - out_be32(&pci->pme_msg_det, 0xffffffff); - out_be32(&pci->pedr, 0xffffffff); - - pci_hose_read_config_word(hose, dev, pci_dsr, &temp16); - if (temp16) { - pci_hose_write_config_word(hose, dev, pci_dsr, 0xffff); - } - - pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16); - if (temp16) { - pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff); - } -} - -int fsl_is_pci_agent(struct pci_controller *hose) -{ - int pcie_cap_pos; - u8 pcie_cap; - pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); - - pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); - pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); - if (pcie_cap == PCI_CAP_ID_EXP) { - u8 header_type; - - pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, - &header_type); - return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL; - } else { - u8 prog_if; - - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); - /* Programming Interface (PCI_CLASS_PROG) - * 0 == pci host or pcie root-complex, - * 1 == pci agent or pcie end-point - */ - return (prog_if == FSL_PROG_IF_AGENT); - } -} - -int fsl_pci_init_port(struct fsl_pci_info *pci_info, - struct pci_controller *hose, int busno) -{ - volatile ccsr_fsl_pci_t *pci; - struct pci_region *r; - pci_dev_t dev = PCI_BDF(busno,0,0); - int pcie_cap_pos; - u8 pcie_cap; - - pci = (ccsr_fsl_pci_t *) pci_info->regs; - - /* on non-PCIe controllers we don't have pme_msg_det so this code - * should do nothing since the read will return 0 - */ - if (in_be32(&pci->pme_msg_det)) { - out_be32(&pci->pme_msg_det, 0xffffffff); - debug (" with errors. Clearing. Now 0x%08x", - pci->pme_msg_det); - } - - r = hose->regions + hose->region_count; - - /* outbound memory */ - pci_set_region(r++, - pci_info->mem_bus, - pci_info->mem_phys, - pci_info->mem_size, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - pci_info->io_bus, - pci_info->io_phys, - pci_info->io_size, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno = busno; - - fsl_pci_init(hose, pci_info); - - if (fsl_is_pci_agent(hose)) { - fsl_pci_config_unlock(hose); - hose->last_busno = hose->first_busno; -#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER - } else { - /* boot from PCIE --master releases slave's core 0 */ - char *s = env_get("bootmaster"); - char pcie[6]; - sprintf(pcie, "PCIE%d", pci_info->pci_num); - - if (s && (strcmp(s, pcie) == 0)) - fsl_pcie_boot_master_release_slave(pci_info->pci_num); -#endif - } - - pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); - pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); - printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ? - "e" : "", pci_info->pci_num, - hose->first_busno, hose->last_busno); - return(hose->last_busno + 1); -} - -/* Enable inbound PCI config cycles for agent/endpoint interface */ -void fsl_pci_config_unlock(struct pci_controller *hose) -{ - pci_dev_t dev = PCI_BDF(hose->first_busno,0,0); - int pcie_cap_pos; - u8 pcie_cap; - u16 pbfr; - - if (!fsl_is_pci_agent(hose)) - return; - - pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); - pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); - if (pcie_cap != 0x0) { - ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)hose->cfg_addr; - u32 block_rev = in_be32(&pci->block_rev1); - /* PCIe - set CFG_READY bit of Configuration Ready Register */ - if (block_rev >= PEX_IP_BLK_REV_3_0) - setbits_be32(&pci->config, FSL_PCIE_V3_CFG_RDY); - else - pci_hose_write_config_byte(hose, dev, - FSL_PCIE_CFG_RDY, 0x1); - } else { - /* PCI - clear ACL bit of PBFR */ - pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr); - pbfr &= ~0x20; - pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr); - } -} - -#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || \ - defined(CONFIG_PCIE3) || defined(CONFIG_PCIE4) -int fsl_configure_pcie(struct fsl_pci_info *info, - struct pci_controller *hose, - const char *connected, int busno) -{ - int is_endpoint; - - set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law); - set_next_law(info->io_phys, law_size_bits(info->io_size), info->law); - - is_endpoint = fsl_setup_hose(hose, info->regs); - printf("PCIe%u: %s", info->pci_num, - is_endpoint ? "Endpoint" : "Root Complex"); - if (connected) - printf(" of %s", connected); - puts(", "); - - return fsl_pci_init_port(info, hose, busno); -} - -#if defined(CONFIG_FSL_CORENET) -#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 - #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1 - #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2 - #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3 - #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4 -#else - #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1 - #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2 - #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3 - #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4 -#endif - #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR -#elif defined(CONFIG_MPC85xx) - #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE - #define _DEVDISR_PCIE2 MPC85xx_DEVDISR_PCIE2 - #define _DEVDISR_PCIE3 MPC85xx_DEVDISR_PCIE3 - #define _DEVDISR_PCIE4 0 - #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR -#elif defined(CONFIG_MPC86xx) - #define _DEVDISR_PCIE1 MPC86xx_DEVDISR_PCIE1 - #define _DEVDISR_PCIE2 MPC86xx_DEVDISR_PCIE2 - #define _DEVDISR_PCIE3 0 - #define _DEVDISR_PCIE4 0 - #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \ - (&((immap_t *)CONFIG_SYS_IMMR)->im_gur) -#else -#error "No defines for DEVDISR_PCIE" -#endif - -/* Implement a dummy function for those platforms w/o SERDES */ -static const char *__board_serdes_name(enum srds_prtcl device) -{ - switch (device) { -#ifdef CONFIG_SYS_PCIE1_NAME - case PCIE1: - return CONFIG_SYS_PCIE1_NAME; -#endif -#ifdef CONFIG_SYS_PCIE2_NAME - case PCIE2: - return CONFIG_SYS_PCIE2_NAME; -#endif -#ifdef CONFIG_SYS_PCIE3_NAME - case PCIE3: - return CONFIG_SYS_PCIE3_NAME; -#endif -#ifdef CONFIG_SYS_PCIE4_NAME - case PCIE4: - return CONFIG_SYS_PCIE4_NAME; -#endif - default: - return NULL; - } - - return NULL; -} - -__attribute__((weak, alias("__board_serdes_name"))) const char * -board_serdes_name(enum srds_prtcl device); - -static u32 devdisr_mask[] = { - _DEVDISR_PCIE1, - _DEVDISR_PCIE2, - _DEVDISR_PCIE3, - _DEVDISR_PCIE4, -}; - -int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, - struct fsl_pci_info *pci_info) -{ - struct pci_controller *hose; - int num = dev - PCIE1; - - hose = calloc(1, sizeof(struct pci_controller)); - if (!hose) - return busno; - - if (is_serdes_configured(dev) && !(devdisr & devdisr_mask[num])) { - busno = fsl_configure_pcie(pci_info, hose, - board_serdes_name(dev), busno); - } else { - printf("PCIe%d: disabled\n", num + 1); - } - - return busno; -} - -int fsl_pcie_init_board(int busno) -{ - struct fsl_pci_info pci_info; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; - u32 devdisr; - u32 *addr; - -#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 - addr = &gur->devdisr3; -#else - addr = &gur->devdisr; -#endif - devdisr = in_be32(addr); - -#ifdef CONFIG_PCIE1 - SET_STD_PCIE_INFO(pci_info, 1); - busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info); -#else - setbits_be32(addr, _DEVDISR_PCIE1); /* disable */ -#endif - -#ifdef CONFIG_PCIE2 - SET_STD_PCIE_INFO(pci_info, 2); - busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info); -#else - setbits_be32(addr, _DEVDISR_PCIE2); /* disable */ -#endif - -#ifdef CONFIG_PCIE3 - SET_STD_PCIE_INFO(pci_info, 3); - busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info); -#else - setbits_be32(addr, _DEVDISR_PCIE3); /* disable */ -#endif - -#ifdef CONFIG_PCIE4 - SET_STD_PCIE_INFO(pci_info, 4); - busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info); -#else - setbits_be32(addr, _DEVDISR_PCIE4); /* disable */ -#endif - - return busno; -} -#else -int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, - struct fsl_pci_info *pci_info) -{ - return busno; -} - -int fsl_pcie_init_board(int busno) -{ - return busno; -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -#include <linux/libfdt.h> -#include <fdt_support.h> - -void ft_fsl_pci_setup(void *blob, const char *pci_compat, - unsigned long ctrl_addr) -{ - int off; - u32 bus_range[2]; - phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr; - struct pci_controller *hose; - - hose = find_hose_by_cfg_addr((void *)(ctrl_addr)); - - /* convert ctrl_addr to true physical address */ - p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR; - p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS; - - off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr); - - if (off < 0) - return; - - /* We assume a cfg_addr not being set means we didn't setup the controller */ - if ((hose == NULL) || (hose->cfg_addr == NULL)) { - fdt_del_node(blob, off); - } else { - bus_range[0] = 0; - bus_range[1] = hose->last_busno - hose->first_busno; - fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4); - fdt_pci_dma_ranges(blob, off, hose); - } -} -#endif diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c index a92f00d..22b6d8b 100644 --- a/drivers/pci/pci-aardvark.c +++ b/drivers/pci/pci-aardvark.c @@ -21,6 +21,7 @@ * * Author: Victor Gu <xigu@marvell.com> * Hezi Shahmoon <hezi.shahmoon@marvell.com> + * Pali Rohár <pali@kernel.org> * */ @@ -165,16 +166,6 @@ #define PCIE_CONFIG_WR_TYPE0 0xa #define PCIE_CONFIG_WR_TYPE1 0xb -/* PCI_BDF shifts 8bit, so we need extra 4bit shift */ -#define PCIE_BDF(b, d, f) (PCI_BDF(b, d, f) << 4) -#define PCIE_CONF_BUS(bus) (((bus) & 0xff) << 20) -#define PCIE_CONF_DEV(dev) (((dev) & 0x1f) << 15) -#define PCIE_CONF_FUNC(fun) (((fun) & 0x7) << 12) -#define PCIE_CONF_REG(reg) ((reg) & 0xffc) -#define PCIE_CONF_ADDR(bus, devfn, where) \ - (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where)) - /* PCIe Retries & Timeout definitions */ #define PIO_MAX_RETRIES 1500 #define PIO_WAIT_TIMEOUT 1000 @@ -467,7 +458,7 @@ static int pcie_advk_read_config(const struct udevice *bus, pci_dev_t bdf, advk_writel(pcie, reg, PIO_CTRL); /* Program the address registers */ - reg = PCIE_BDF(busno, PCI_DEV(bdf), PCI_FUNC(bdf)) | PCIE_CONF_REG(offset); + reg = PCIE_ECAM_OFFSET(busno, PCI_DEV(bdf), PCI_FUNC(bdf), (offset & ~0x3)); advk_writel(pcie, reg, PIO_ADDR_LS); advk_writel(pcie, 0, PIO_ADDR_MS); @@ -626,7 +617,7 @@ static int pcie_advk_write_config(struct udevice *bus, pci_dev_t bdf, advk_writel(pcie, reg, PIO_CTRL); /* Program the address registers */ - reg = PCIE_BDF(busno, PCI_DEV(bdf), PCI_FUNC(bdf)) | PCIE_CONF_REG(offset); + reg = PCIE_ECAM_OFFSET(busno, PCI_DEV(bdf), PCI_FUNC(bdf), (offset & ~0x3)); advk_writel(pcie, reg, PIO_ADDR_LS); advk_writel(pcie, 0, PIO_ADDR_MS); dev_dbg(pcie->dev, "\tPIO req. - addr = 0x%08x\n", reg); diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c index 62a4df3..9248cbc 100644 --- a/drivers/pci/pci_mvebu.c +++ b/drivers/pci/pci_mvebu.c @@ -7,13 +7,13 @@ * Ported to U-Boot by: * Anton Schubert <anton.schubert@gmx.de> * Stefan Roese <sr@denx.de> + * Pali Rohár <pali@kernel.org> */ #include <common.h> #include <dm.h> #include <log.h> #include <malloc.h> -#include <asm/global_data.h> #include <dm/device-internal.h> #include <dm/lists.h> #include <dm/of_access.h> @@ -26,8 +26,6 @@ #include <linux/ioport.h> #include <linux/mbus.h> -DECLARE_GLOBAL_DATA_PTR; - /* PCIe unit register offsets */ #define SELECT(x, n) ((x >> n) & 1UL) @@ -313,7 +311,9 @@ static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf, /* * Setup PCIE BARs and Address Decode Wins: - * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * BAR[0] -> internal registers + * BAR[1] -> covers all DRAM banks + * BAR[2] -> disabled * WIN[0-3] -> DRAM bank[0-3] */ static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie) @@ -364,6 +364,10 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie) writel(0, pcie->base + PCIE_BAR_HI_OFF(1)); writel(((size - 1) & 0xffff0000) | 0x1, pcie->base + PCIE_BAR_CTRL_OFF(1)); + + /* Setup BAR[0] to internal registers. */ + writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); + writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); } static int mvebu_pcie_probe(struct udevice *dev) @@ -444,9 +448,9 @@ static int mvebu_pcie_probe(struct udevice *dev) if (mvebu_mbus_add_window_by_id(pcie->mem_target, pcie->mem_attr, (phys_addr_t)pcie->mem.start, - MBUS_PCI_MEM_SIZE)) { + resource_size(&pcie->mem))) { printf("PCIe unable to add mbus window for mem at %08x+%08x\n", - (u32)pcie->mem.start, MBUS_PCI_MEM_SIZE); + (u32)pcie->mem.start, (unsigned)resource_size(&pcie->mem)); } pcie->io.start = (u32)mvebu_pcie_iobase; @@ -455,9 +459,9 @@ static int mvebu_pcie_probe(struct udevice *dev) if (mvebu_mbus_add_window_by_id(pcie->io_target, pcie->io_attr, (phys_addr_t)pcie->io.start, - MBUS_PCI_IO_SIZE)) { + resource_size(&pcie->io))) { printf("PCIe unable to add mbus window for IO at %08x+%08x\n", - (u32)pcie->io.start, MBUS_PCI_IO_SIZE); + (u32)pcie->io.start, (unsigned)resource_size(&pcie->io)); } /* Setup windows and configure host bridge */ @@ -465,19 +469,15 @@ static int mvebu_pcie_probe(struct udevice *dev) /* PCI memory space */ pci_set_region(hose->regions + 0, pcie->mem.start, - pcie->mem.start, MBUS_PCI_MEM_SIZE, PCI_REGION_MEM); + pcie->mem.start, resource_size(&pcie->mem), PCI_REGION_MEM); pci_set_region(hose->regions + 1, 0, 0, gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); pci_set_region(hose->regions + 2, pcie->io.start, - pcie->io.start, MBUS_PCI_IO_SIZE, PCI_REGION_IO); + pcie->io.start, resource_size(&pcie->io), PCI_REGION_IO); hose->region_count = 3; - /* Set BAR0 to internal registers */ - writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); - writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); - /* PCI Bridge support 32-bit I/O and 64-bit prefetch mem addressing */ pcie->cfgcache[(PCI_IO_BASE - 0x10) / 4] = PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8); diff --git a/drivers/pci/pcie_ecam_generic.c b/drivers/pci/pcie_ecam_generic.c index e83e5af..1a9f9ae 100644 --- a/drivers/pci/pcie_ecam_generic.c +++ b/drivers/pci/pcie_ecam_generic.c @@ -14,6 +14,8 @@ #include <asm/io.h> +#define TYPE_PCI 0x1 + /** * struct generic_ecam_pcie - generic_ecam PCIe controller state * @cfg_base: The base address of memory mapped configuration space @@ -46,10 +48,14 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus, void *addr; addr = pcie->cfg_base; - addr += (PCI_BUS(bdf) - pcie->first_busno) << 20; - addr += PCI_DEV(bdf) << 15; - addr += PCI_FUNC(bdf) << 12; - addr += offset; + + if (dev_get_driver_data(bus) == TYPE_PCI) { + addr += ((PCI_BUS(bdf) - pcie->first_busno) << 16) | + (PCI_DEV(bdf) << 11) | (PCI_FUNC(bdf) << 8) | offset; + } else { + addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf) - pcie->first_busno, + PCI_DEV(bdf), PCI_FUNC(bdf), offset); + } *paddress = addr; return 0; @@ -158,7 +164,8 @@ static const struct dm_pci_ops pci_generic_ecam_ops = { }; static const struct udevice_id pci_generic_ecam_ids[] = { - { .compatible = "pci-host-ecam-generic" }, + { .compatible = "pci-host-ecam-generic" /* PCI-E */ }, + { .compatible = "pci-host-cam-generic", .data = TYPE_PCI }, { } }; diff --git a/drivers/pci/pcie_ecam_synquacer.c b/drivers/pci/pcie_ecam_synquacer.c index c6e7c59..e3e2289 100644 --- a/drivers/pci/pcie_ecam_synquacer.c +++ b/drivers/pci/pcie_ecam_synquacer.c @@ -235,10 +235,8 @@ static int pci_synquacer_ecam_conf_address(const struct udevice *bus, void *addr; addr = pcie->cfg_base; - addr += (PCI_BUS(bdf) - pcie->first_busno) << 20; - addr += PCI_DEV(bdf) << 15; - addr += PCI_FUNC(bdf) << 12; - addr += offset; + addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf) - pcie->first_busno, + PCI_DEV(bdf), PCI_FUNC(bdf), offset); *paddress = addr; return 0; diff --git a/drivers/pci/pcie_layerscape_fixup.c b/drivers/pci/pcie_layerscape_fixup.c index 8a2a0e1..a47c9ef 100644 --- a/drivers/pci/pcie_layerscape_fixup.c +++ b/drivers/pci/pcie_layerscape_fixup.c @@ -584,9 +584,9 @@ static void ft_pcie_rc_fix(void *blob, struct ls_pcie_rc *pcie_rc) return; if (pcie_rc->enabled && pcie->mode == PCI_HEADER_TYPE_BRIDGE) - fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0); + fdt_set_node_status(blob, off, FDT_STATUS_OKAY); else - fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED); } static void ft_pcie_ep_fix(void *blob, struct ls_pcie_rc *pcie_rc) @@ -600,9 +600,9 @@ static void ft_pcie_ep_fix(void *blob, struct ls_pcie_rc *pcie_rc) return; if (pcie_rc->enabled && pcie->mode == PCI_HEADER_TYPE_NORMAL) - fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0); + fdt_set_node_status(blob, off, FDT_STATUS_OKAY); else - fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED); } static void ft_pcie_ls_setup(void *blob, struct ls_pcie_rc *pcie_rc) diff --git a/drivers/pci/pcie_layerscape_gen4_fixup.c b/drivers/pci/pcie_layerscape_gen4_fixup.c index 7d11234..b2a45bf 100644 --- a/drivers/pci/pcie_layerscape_gen4_fixup.c +++ b/drivers/pci/pcie_layerscape_gen4_fixup.c @@ -193,9 +193,9 @@ static void ft_pcie_ep_layerscape_gen4_fix(void *blob, struct ls_pcie_g4 *pcie) } if (pcie->enabled && pcie->mode == PCI_HEADER_TYPE_NORMAL) - fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0); + fdt_set_node_status(blob, off, FDT_STATUS_OKAY); else - fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED); } static void ft_pcie_rc_layerscape_gen4_fix(void *blob, struct ls_pcie_g4 *pcie) @@ -214,9 +214,9 @@ static void ft_pcie_rc_layerscape_gen4_fix(void *blob, struct ls_pcie_g4 *pcie) } if (pcie->enabled && pcie->mode == PCI_HEADER_TYPE_BRIDGE) - fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0); + fdt_set_node_status(blob, off, FDT_STATUS_OKAY); else - fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED); } static void ft_pcie_layerscape_gen4_setup(void *blob, struct ls_pcie_g4 *pcie) diff --git a/drivers/pci/pcie_phytium.c b/drivers/pci/pcie_phytium.c index 752e170..a807276 100644 --- a/drivers/pci/pcie_phytium.c +++ b/drivers/pci/pcie_phytium.c @@ -36,9 +36,7 @@ static int phytium_pci_skip_dev(pci_dev_t parent) unsigned short capreg; unsigned char port_type; - addr += PCI_BUS(parent) << 20; - addr += PCI_DEV(parent) << 15; - addr += PCI_FUNC(parent) << 12; + addr += PCIE_ECAM_OFFSET(PCI_BUS(parent), PCI_DEV(parent), PCI_FUNC(parent), 0); pos = 0x34; while (1) { @@ -89,9 +87,7 @@ static int pci_phytium_conf_address(const struct udevice *bus, pci_dev_t bdf, bdf_parent = PCI_BDF((bus_no - 1), 0, 0); addr = pcie->cfg_base; - addr += PCI_BUS(bdf) << 20; - addr += PCI_DEV(bdf) << 15; - addr += PCI_FUNC(bdf) << 12; + addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), 0); if (bus_no > 0 && dev_no > 0) { if ((readb(addr + PCI_HEADER_TYPE) & 0x7f) != diff --git a/drivers/pci/pcie_rockchip.c b/drivers/pci/pcie_rockchip.c index b0c91c0..67039d2 100644 --- a/drivers/pci/pcie_rockchip.c +++ b/drivers/pci/pcie_rockchip.c @@ -101,15 +101,6 @@ struct rockchip_pcie { struct phy pcie_phy; }; -static int rockchip_pcie_off_conf(pci_dev_t bdf, uint offset) -{ - unsigned int bus = PCI_BUS(bdf); - unsigned int dev = PCI_DEV(bdf); - unsigned int func = PCI_FUNC(bdf); - - return (bus << 20) | (dev << 15) | (func << 12) | (offset & ~0x3); -} - static int rockchip_pcie_rd_conf(const struct udevice *udev, pci_dev_t bdf, uint offset, ulong *valuep, enum pci_size_t size) @@ -117,7 +108,7 @@ static int rockchip_pcie_rd_conf(const struct udevice *udev, pci_dev_t bdf, struct rockchip_pcie *priv = dev_get_priv(udev); unsigned int bus = PCI_BUS(bdf); unsigned int dev = PCI_DEV(bdf); - int where = rockchip_pcie_off_conf(bdf, offset); + int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), offset & ~0x3); ulong value; if (bus == priv->first_busno && dev == 0) { @@ -144,7 +135,7 @@ static int rockchip_pcie_wr_conf(struct udevice *udev, pci_dev_t bdf, struct rockchip_pcie *priv = dev_get_priv(udev); unsigned int bus = PCI_BUS(bdf); unsigned int dev = PCI_DEV(bdf); - int where = rockchip_pcie_off_conf(bdf, offset); + int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), offset & ~0x3); ulong old; if (bus == priv->first_busno && dev == 0) { diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c index ae9a65b..eb9ec97 100644 --- a/drivers/pci/pcie_xilinx.c +++ b/drivers/pci/pcie_xilinx.c @@ -76,10 +76,7 @@ static int pcie_xilinx_config_address(const struct udevice *udev, pci_dev_t bdf, return -ENODEV; addr = pcie->cfg_base; - addr += bus << 20; - addr += dev << 15; - addr += func << 12; - addr += offset; + addr += PCIE_ECAM_OFFSET(bus, dev, func, offset); *paddress = addr; return 0; diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c index 141ece4..ef924e7 100644 --- a/drivers/phy/cadence/phy-cadence-torrent.c +++ b/drivers/phy/cadence/phy-cadence-torrent.c @@ -616,8 +616,8 @@ static int cdns_torrent_phy_probe(struct udevice *dev) /* Going through all the available subnodes or children*/ ofnode_for_each_subnode(child, dev_ofnode(dev)) { - /* PHY subnode name must be a 'link' */ - if (!ofnode_name_eq(child, "link")) + /* PHY subnode name must be a 'phy' */ + if (!ofnode_name_eq(child, "phy")) continue; cdns_phy->phys[node].lnk_rst = devm_reset_bulk_get_by_node(dev, child); diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c index 047c8bb..4104353 100644 --- a/drivers/phy/marvell/comphy_a3700.c +++ b/drivers/phy/marvell/comphy_a3700.c @@ -11,6 +11,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/soc.h> #include <linux/delay.h> +#include <phy.h> #include "comphy_a3700.h" @@ -982,6 +983,138 @@ void comphy_dedicated_phys_init(void) debug_exit(); } +static int find_available_node_by_compatible(int offset, const char *compatible) +{ + do { + offset = fdt_node_offset_by_compatible(gd->fdt_blob, offset, + compatible); + } while (offset > 0 && !fdtdec_get_is_enabled(gd->fdt_blob, offset)); + + return offset; +} + +static bool comphy_a3700_find_lane(const int nodes[3], int node, + int port, int *lane, int *invert) +{ + int res, i, j; + + for (i = 0; ; i++) { + struct fdtdec_phandle_args args; + + res = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "phys", + "#phy-cells", 0, i, &args); + if (res) + return false; + + for (j = 0; j < 3; j++) { + if (nodes[j] >= 0 && args.node == nodes[j] && + (args.args_count >= 1 ? args.args[0] : 0) == port) { + *lane = j; + *invert = args.args_count >= 2 ? args.args[1] + : 0; + return true; + } + } + } + + return false; +} + +static void comphy_a3700_fill_cfg(struct chip_serdes_phy_config *cfg, + const int nodes[3], const char *compatible, + int type) +{ + int node, lane, port, speed, invert; + + port = (type == COMPHY_TYPE_SGMII1) ? 1 : 0; + + node = -1; + while (1) { + node = find_available_node_by_compatible(node, compatible); + if (node < 0) + return; + + if (comphy_a3700_find_lane(nodes, node, port, &lane, &invert)) + break; + } + + if (cfg->comphy_map_data[lane].type != COMPHY_TYPE_UNCONNECTED) { + printf("Error: More PHYs defined for lane %d, skipping\n", + lane); + return; + } + + if (type == COMPHY_TYPE_SGMII0 || type == COMPHY_TYPE_SGMII1) { + const char *phy_mode; + + phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL); + if (phy_mode && + !strcmp(phy_mode, + phy_string_for_interface(PHY_INTERFACE_MODE_2500BASEX))) + speed = COMPHY_SPEED_3_125G; + else + speed = COMPHY_SPEED_1_25G; + } else if (type == COMPHY_TYPE_SATA0) { + speed = COMPHY_SPEED_6G; + } else { + speed = COMPHY_SPEED_5G; + } + + cfg->comphy_map_data[lane].type = type; + cfg->comphy_map_data[lane].speed = speed; + cfg->comphy_map_data[lane].invert = invert; +} + +static const fdt32_t comphy_a3700_mux_lane_order[3] = { + __constant_cpu_to_be32(1), + __constant_cpu_to_be32(0), + __constant_cpu_to_be32(2), +}; + +int comphy_a3700_init_serdes_map(int node, struct chip_serdes_phy_config *cfg) +{ + int comphy_nodes[3]; + int child, i; + + for (i = 0; i < ARRAY_SIZE(comphy_nodes); i++) + comphy_nodes[i] = -FDT_ERR_NOTFOUND; + + fdt_for_each_subnode(child, gd->fdt_blob, node) { + if (!fdtdec_get_is_enabled(gd->fdt_blob, child)) + continue; + + i = fdtdec_get_int(gd->fdt_blob, child, "reg", -1); + if (i < 0 || i >= ARRAY_SIZE(comphy_nodes)) + continue; + + comphy_nodes[i] = child; + } + + for (i = 0; i < ARRAY_SIZE(comphy_nodes); i++) { + cfg->comphy_map_data[i].type = COMPHY_TYPE_UNCONNECTED; + cfg->comphy_map_data[i].speed = COMPHY_SPEED_INVALID; + } + + comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada3700-u3d", + COMPHY_TYPE_USB3_DEVICE); + comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada3700-xhci", + COMPHY_TYPE_USB3_HOST0); + comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada-3700-pcie", + COMPHY_TYPE_PEX0); + comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada-3700-ahci", + COMPHY_TYPE_SATA0); + comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada-3700-neta", + COMPHY_TYPE_SGMII0); + comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada-3700-neta", + COMPHY_TYPE_SGMII1); + + cfg->comphy_lanes_count = 3; + cfg->comphy_mux_bitcount = 4; + cfg->comphy_mux_lane_order = comphy_a3700_mux_lane_order; + + return 0; +} + int comphy_a3700_init(struct chip_serdes_phy_config *chip_cfg, struct comphy_map *serdes_map) { diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c index 2c9d7b2..233a973 100644 --- a/drivers/phy/marvell/comphy_core.c +++ b/drivers/phy/marvell/comphy_core.c @@ -86,11 +86,8 @@ __weak int comphy_update_map(struct comphy_map *serdes_map, int count) static int comphy_probe(struct udevice *dev) { - const void *blob = gd->fdt_blob; int node = dev_of_offset(dev); struct chip_serdes_phy_config *chip_cfg = dev_get_priv(dev); - int subnode; - int lane; int last_idx = 0; static int current_idx; int res; @@ -104,30 +101,14 @@ static int comphy_probe(struct udevice *dev) if (IS_ERR(chip_cfg->hpipe3_base_addr)) return PTR_ERR(chip_cfg->hpipe3_base_addr); - chip_cfg->comphy_lanes_count = fdtdec_get_int(blob, node, - "max-lanes", 0); - if (chip_cfg->comphy_lanes_count <= 0) { - dev_err(dev, "comphy max lanes is wrong\n"); - return -EINVAL; - } - - chip_cfg->comphy_mux_bitcount = fdtdec_get_int(blob, node, - "mux-bitcount", 0); - if (chip_cfg->comphy_mux_bitcount <= 0) { - dev_err(dev, "comphy mux bit count is wrong\n"); - return -EINVAL; - } - - chip_cfg->comphy_mux_lane_order = - fdtdec_locate_array(blob, node, "mux-lane-order", - chip_cfg->comphy_lanes_count); - if (device_is_compatible(dev, "marvell,comphy-armada-3700")) { + chip_cfg->comphy_init_map = comphy_a3700_init_serdes_map; chip_cfg->ptr_comphy_chip_init = comphy_a3700_init; chip_cfg->rx_training = NULL; } if (device_is_compatible(dev, "marvell,comphy-cp110")) { + chip_cfg->comphy_init_map = comphy_cp110_init_serdes_map; chip_cfg->ptr_comphy_chip_init = comphy_cp110_init; chip_cfg->rx_training = comphy_cp110_sfi_rx_training; } @@ -141,39 +122,9 @@ static int comphy_probe(struct udevice *dev) return -ENODEV; } - lane = 0; - fdt_for_each_subnode(subnode, blob, node) { - /* Skip disabled ports */ - if (!fdtdec_get_is_enabled(blob, subnode)) - continue; - - chip_cfg->comphy_map_data[lane].type = - fdtdec_get_int(blob, subnode, "phy-type", - COMPHY_TYPE_INVALID); - - if (chip_cfg->comphy_map_data[lane].type == - COMPHY_TYPE_INVALID) { - printf("no phy type for lane %d, setting lane as unconnected\n", - lane + 1); - continue; - } - - chip_cfg->comphy_map_data[lane].speed = - fdtdec_get_int(blob, subnode, "phy-speed", - COMPHY_SPEED_INVALID); - - chip_cfg->comphy_map_data[lane].invert = - fdtdec_get_int(blob, subnode, "phy-invert", - COMPHY_POLARITY_NO_INVERT); - - chip_cfg->comphy_map_data[lane].clk_src = - fdtdec_get_bool(blob, subnode, "clk-src"); - - chip_cfg->comphy_map_data[lane].end_point = - fdtdec_get_bool(blob, subnode, "end_point"); - - lane++; - } + res = chip_cfg->comphy_init_map(node, chip_cfg); + if (res < 0) + return res; res = comphy_update_map(chip_cfg->comphy_map_data, chip_cfg->comphy_lanes_count); if (res < 0) diff --git a/drivers/phy/marvell/comphy_core.h b/drivers/phy/marvell/comphy_core.h index 9bbd7f8..d573776 100644 --- a/drivers/phy/marvell/comphy_core.h +++ b/drivers/phy/marvell/comphy_core.h @@ -32,6 +32,7 @@ struct comphy_mux_data { struct chip_serdes_phy_config { struct comphy_mux_data *mux_data; + int (*comphy_init_map)(int, struct chip_serdes_phy_config *); int (*ptr_comphy_chip_init)(struct chip_serdes_phy_config *, struct comphy_map *); int (*rx_training)(struct chip_serdes_phy_config *, u32); @@ -85,9 +86,20 @@ static inline void reg_set16(void __iomem *addr, u16 data, u16 mask) /* SoC specific init functions */ #ifdef CONFIG_ARMADA_3700 +int comphy_a3700_init_serdes_map(int node, struct chip_serdes_phy_config *cfg); int comphy_a3700_init(struct chip_serdes_phy_config *ptr_chip_cfg, struct comphy_map *serdes_map); #else +static inline int +comphy_a3700_init_serdes_map(int node, struct chip_serdes_phy_config *cfg) +{ + /* + * This function should never be called in this configuration, so + * lets return an error here. + */ + return -1; +} + static inline int comphy_a3700_init(struct chip_serdes_phy_config *ptr_chip_cfg, struct comphy_map *serdes_map) { @@ -100,11 +112,22 @@ static inline int comphy_a3700_init(struct chip_serdes_phy_config *ptr_chip_cfg, #endif #ifdef CONFIG_ARMADA_8K +int comphy_cp110_init_serdes_map(int node, struct chip_serdes_phy_config *cfg); int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, struct comphy_map *serdes_map); int comphy_cp110_sfi_rx_training(struct chip_serdes_phy_config *ptr_chip_cfg, u32 lane); #else +static inline int +comphy_cp110_init_serdes_map(int node, struct chip_serdes_phy_config *cfg) +{ + /* + * This function should never be called in this configuration, so + * lets return an error here. + */ + return -1; +} + static inline int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, struct comphy_map *serdes_map) { diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 4fe2dfc..e063b51 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -554,6 +554,64 @@ void comphy_dedicated_phys_init(void) debug_exit(); } +int comphy_cp110_init_serdes_map(int node, struct chip_serdes_phy_config *cfg) +{ + int lane, subnode; + + cfg->comphy_lanes_count = fdtdec_get_int(gd->fdt_blob, node, + "max-lanes", 0); + if (cfg->comphy_lanes_count <= 0) { + printf("comphy max lanes is wrong\n"); + return -EINVAL; + } + + cfg->comphy_mux_bitcount = fdtdec_get_int(gd->fdt_blob, node, + "mux-bitcount", 0); + if (cfg->comphy_mux_bitcount <= 0) { + printf("comphy mux bit count is wrong\n"); + return -EINVAL; + } + + cfg->comphy_mux_lane_order = fdtdec_locate_array(gd->fdt_blob, node, + "mux-lane-order", + cfg->comphy_lanes_count); + + lane = 0; + fdt_for_each_subnode(subnode, gd->fdt_blob, node) { + /* Skip disabled ports */ + if (!fdtdec_get_is_enabled(gd->fdt_blob, subnode)) + continue; + + cfg->comphy_map_data[lane].type = + fdtdec_get_int(gd->fdt_blob, subnode, "phy-type", + COMPHY_TYPE_INVALID); + + if (cfg->comphy_map_data[lane].type == COMPHY_TYPE_INVALID) { + printf("no phy type for lane %d, setting lane as unconnected\n", + lane + 1); + continue; + } + + cfg->comphy_map_data[lane].speed = + fdtdec_get_int(gd->fdt_blob, subnode, "phy-speed", + COMPHY_SPEED_INVALID); + + cfg->comphy_map_data[lane].invert = + fdtdec_get_int(gd->fdt_blob, subnode, "phy-invert", + COMPHY_POLARITY_NO_INVERT); + + cfg->comphy_map_data[lane].clk_src = + fdtdec_get_bool(gd->fdt_blob, subnode, "clk-src"); + + cfg->comphy_map_data[lane].end_point = + fdtdec_get_bool(gd->fdt_blob, subnode, "end_point"); + + lane++; + } + + return 0; +} + int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, struct comphy_map *serdes_map) { diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 30eaa37..0394624 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -145,6 +145,17 @@ config SPL_PINCONF_RECURSIVE if PINCTRL || SPL_PINCTRL +config PINCTRL_APPLE + bool "Apple pinctrl driver" + depends on DM && PINCTRL_GENERIC && ARCH_APPLE + default y + help + Support pin multiplexing on Apple SoCs. + + The driver is controlled by a device tree node which contains + both the GPIO definitions and pin control functions for each + available multiplex function. + config PINCTRL_AR933X bool "QCA/Athores ar933x pin control driver" depends on DM && SOC_AR933X @@ -291,6 +302,15 @@ config ASPEED_AST2500_PINCTRL uses Generic Pinctrl framework and is compatible with the Linux driver, i.e. it uses the same device tree configuration. +config ASPEED_AST2600_PINCTRL + bool "Aspeed AST2600 pin control driver" + depends on DM && PINCTRL_GENERIC && ASPEED_AST2600 + default y + help + Support pin multiplexing control on Aspeed ast2600 SoC. The driver + uses Generic Pinctrl framework and is compatible with the Linux + driver, i.e. it uses the same device tree configuration. + config PINCTRL_K210 bool "Kendryte K210 Fully-Programmable Input/Output Array driver" depends on DM && PINCTRL_GENERIC diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 05b71f2..fd736a7 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -3,6 +3,7 @@ obj-y += pinctrl-uclass.o obj-$(CONFIG_$(SPL_)PINCTRL_GENERIC) += pinctrl-generic.o +obj-$(CONFIG_PINCTRL_APPLE) += pinctrl-apple.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o obj-y += nxp/ diff --git a/drivers/pinctrl/aspeed/Makefile b/drivers/pinctrl/aspeed/Makefile index 2e6ed60..a3e01ed 100644 --- a/drivers/pinctrl/aspeed/Makefile +++ b/drivers/pinctrl/aspeed/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_ASPEED_AST2500_PINCTRL) += pinctrl_ast2500.o +obj-$(CONFIG_ASPEED_AST2600_PINCTRL) += pinctrl_ast2600.o diff --git a/drivers/pinctrl/aspeed/pinctrl_ast2600.c b/drivers/pinctrl/aspeed/pinctrl_ast2600.c new file mode 100644 index 0000000..12cba83 --- /dev/null +++ b/drivers/pinctrl/aspeed/pinctrl_ast2600.c @@ -0,0 +1,459 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) ASPEED Technology Inc. + */ + +#include <common.h> +#include <errno.h> +#include <asm/arch/pinctrl.h> +#include <asm/arch/scu_ast2600.h> +#include <asm/io.h> +#include <dm.h> +#include <dm/pinctrl.h> +#include <linux/bitops.h> +#include <linux/err.h> + +/* + * This driver works with very simple configuration that has the same name + * for group and function. This way it is compatible with the Linux Kernel + * driver. + */ +struct aspeed_sig_desc { + u32 offset; + u32 reg_set; + int clr; +}; + +struct aspeed_group_config { + char *group_name; + int ndescs; + struct aspeed_sig_desc *descs; +}; + +struct ast2600_pinctrl_priv { + struct ast2600_scu *scu; +}; + +static int ast2600_pinctrl_probe(struct udevice *dev) +{ + struct ast2600_pinctrl_priv *priv = dev_get_priv(dev); + struct udevice *clk_dev; + int ret = 0; + + /* find SCU base address from clock device */ + uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(aspeed_ast2600_scu), &clk_dev); + + if (ret) + return ret; + + priv->scu = dev_read_addr_ptr(clk_dev); + if (IS_ERR(priv->scu)) + return PTR_ERR(priv->scu); + + return 0; +} + +static struct aspeed_sig_desc i2c1_link[] = { + { 0x418, GENMASK(9, 8), 1 }, + { 0x4B8, GENMASK(9, 8), 0 }, +}; + +static struct aspeed_sig_desc i2c2_link[] = { + { 0x418, GENMASK(11, 10), 1 }, + { 0x4B8, GENMASK(11, 10), 0 }, +}; + +static struct aspeed_sig_desc i2c3_link[] = { + { 0x418, GENMASK(13, 12), 1 }, + { 0x4B8, GENMASK(13, 12), 0 }, +}; + +static struct aspeed_sig_desc i2c4_link[] = { + { 0x418, GENMASK(15, 14), 1 }, + { 0x4B8, GENMASK(15, 14), 0 }, +}; + +static struct aspeed_sig_desc i2c5_link[] = { + { 0x418, GENMASK(17, 16), 0 }, +}; + +static struct aspeed_sig_desc i2c6_link[] = { + { 0x418, GENMASK(19, 18), 0 }, +}; + +static struct aspeed_sig_desc i2c7_link[] = { + { 0x418, GENMASK(21, 20), 0 }, +}; + +static struct aspeed_sig_desc i2c8_link[] = { + { 0x418, GENMASK(23, 22), 0 }, +}; + +static struct aspeed_sig_desc i2c9_link[] = { + { 0x418, GENMASK(25, 24), 0 }, +}; + +static struct aspeed_sig_desc i2c10_link[] = { + { 0x418, GENMASK(27, 26), 0 }, +}; + +static struct aspeed_sig_desc i2c11_link[] = { + { 0x410, GENMASK(1, 0), 1 }, + { 0x4B0, GENMASK(1, 0), 0 }, +}; + +static struct aspeed_sig_desc i2c12_link[] = { + { 0x410, GENMASK(3, 2), 1 }, + { 0x4B0, GENMASK(3, 2), 0 }, +}; + +static struct aspeed_sig_desc i2c13_link[] = { + { 0x410, GENMASK(5, 4), 1 }, + { 0x4B0, GENMASK(5, 4), 0 }, +}; + +static struct aspeed_sig_desc i2c14_link[] = { + { 0x410, GENMASK(7, 6), 1 }, + { 0x4B0, GENMASK(7, 6), 0 }, +}; + +static struct aspeed_sig_desc i2c15_link[] = { + { 0x414, GENMASK(29, 28), 1 }, + { 0x4B4, GENMASK(29, 28), 0 }, +}; + +static struct aspeed_sig_desc i2c16_link[] = { + { 0x414, GENMASK(31, 30), 1 }, + { 0x4B4, GENMASK(31, 30), 0 }, +}; + +static struct aspeed_sig_desc mac1_link[] = { + { 0x410, BIT(4), 0 }, + { 0x470, BIT(4), 1 }, +}; + +static struct aspeed_sig_desc mac2_link[] = { + { 0x410, BIT(5), 0 }, + { 0x470, BIT(5), 1 }, +}; + +static struct aspeed_sig_desc mac3_link[] = { + { 0x410, BIT(6), 0 }, + { 0x470, BIT(6), 1 }, +}; + +static struct aspeed_sig_desc mac4_link[] = { + { 0x410, BIT(7), 0 }, + { 0x470, BIT(7), 1 }, +}; + +static struct aspeed_sig_desc rgmii1[] = { + { 0x500, BIT(6), 0 }, + { 0x400, GENMASK(11, 0), 0 }, +}; + +static struct aspeed_sig_desc rgmii2[] = { + { 0x500, BIT(7), 0 }, + { 0x400, GENMASK(23, 12), 0 }, +}; + +static struct aspeed_sig_desc rgmii3[] = { + { 0x510, BIT(0), 0 }, + { 0x410, GENMASK(27, 16), 0 }, +}; + +static struct aspeed_sig_desc rgmii4[] = { + { 0x510, BIT(1), 0 }, + { 0x410, GENMASK(31, 28), 1 }, + { 0x4b0, GENMASK(31, 28), 0 }, + { 0x474, GENMASK(7, 0), 1 }, + { 0x414, GENMASK(7, 0), 1 }, + { 0x4b4, GENMASK(7, 0), 0 }, +}; + +static struct aspeed_sig_desc rmii1[] = { + { 0x504, BIT(6), 0 }, + { 0x400, GENMASK(3, 0), 0 }, + { 0x400, GENMASK(11, 6), 0 }, +}; + +static struct aspeed_sig_desc rmii2[] = { + { 0x504, BIT(7), 0 }, + { 0x400, GENMASK(15, 12), 0 }, + { 0x400, GENMASK(23, 18), 0 }, +}; + +static struct aspeed_sig_desc rmii3[] = { + { 0x514, BIT(0), 0 }, + { 0x410, GENMASK(27, 22), 0 }, + { 0x410, GENMASK(19, 16), 0 }, +}; + +static struct aspeed_sig_desc rmii4[] = { + { 0x514, BIT(1), 0 }, + { 0x410, GENMASK(7, 2), 1 }, + { 0x410, GENMASK(31, 28), 1 }, + { 0x414, GENMASK(7, 2), 1 }, + { 0x4B0, GENMASK(31, 28), 0 }, + { 0x4B4, GENMASK(7, 2), 0 }, +}; + +static struct aspeed_sig_desc rmii1_rclk_oe[] = { + { 0x340, BIT(29), 0 }, +}; + +static struct aspeed_sig_desc rmii2_rclk_oe[] = { + { 0x340, BIT(30), 0 }, +}; + +static struct aspeed_sig_desc rmii3_rclk_oe[] = { + { 0x350, BIT(29), 0 }, +}; + +static struct aspeed_sig_desc rmii4_rclk_oe[] = { + { 0x350, BIT(30), 0 }, +}; + +static struct aspeed_sig_desc mdio1_link[] = { + { 0x430, BIT(17) | BIT(16), 0 }, +}; + +static struct aspeed_sig_desc mdio2_link[] = { + { 0x470, BIT(13) | BIT(12), 1 }, + { 0x410, BIT(13) | BIT(12), 0 }, +}; + +static struct aspeed_sig_desc mdio3_link[] = { + { 0x470, BIT(1) | BIT(0), 1 }, + { 0x410, BIT(1) | BIT(0), 0 }, +}; + +static struct aspeed_sig_desc mdio4_link[] = { + { 0x470, BIT(3) | BIT(2), 1 }, + { 0x410, BIT(3) | BIT(2), 0 }, +}; + +static struct aspeed_sig_desc sdio2_link[] = { + { 0x414, GENMASK(23, 16), 1 }, + { 0x4B4, GENMASK(23, 16), 0 }, + { 0x450, BIT(1), 0 }, +}; + +static struct aspeed_sig_desc sdio1_link[] = { + { 0x414, GENMASK(15, 8), 0 }, +}; + +/* when sdio1 8bits, sdio2 can't use */ +static struct aspeed_sig_desc sdio1_8bit_link[] = { + { 0x414, GENMASK(15, 8), 0 }, + { 0x4b4, GENMASK(21, 18), 0 }, + { 0x450, BIT(3), 0 }, + { 0x450, BIT(1), 1 }, +}; + +static struct aspeed_sig_desc emmc_link[] = { + { 0x400, GENMASK(31, 24), 0 }, +}; + +static struct aspeed_sig_desc emmcg8_link[] = { + { 0x400, GENMASK(31, 24), 0 }, + { 0x404, GENMASK(3, 0), 0 }, +/* set SCU504 to clear the strap bits in SCU500 */ + { 0x504, BIT(3), 0 }, + { 0x504, BIT(5), 0 }, +}; + +static struct aspeed_sig_desc fmcquad_link[] = { + { 0x438, GENMASK(5, 4), 0 }, +}; + +static struct aspeed_sig_desc spi1_link[] = { + { 0x438, GENMASK(13, 11), 0 }, +}; + +static struct aspeed_sig_desc spi1abr_link[] = { + { 0x438, BIT(9), 0 }, +}; + +static struct aspeed_sig_desc spi1cs1_link[] = { + { 0x438, BIT(8), 0 }, +}; + +static struct aspeed_sig_desc spi1wp_link[] = { + { 0x438, BIT(10), 0 }, +}; + +static struct aspeed_sig_desc spi1quad_link[] = { + { 0x438, GENMASK(15, 14), 0 }, +}; + +static struct aspeed_sig_desc spi2_link[] = { + { 0x434, GENMASK(29, 27) | BIT(24), 0 }, +}; + +static struct aspeed_sig_desc spi2cs1_link[] = { + { 0x434, BIT(25), 0 }, +}; + +static struct aspeed_sig_desc spi2cs2_link[] = { + { 0x434, BIT(26), 0 }, +}; + +static struct aspeed_sig_desc spi2quad_link[] = { + { 0x434, GENMASK(31, 30), 0 }, +}; + +static struct aspeed_sig_desc fsi1[] = { + { 0xd48, GENMASK(21, 20), 0 }, +}; + +static struct aspeed_sig_desc fsi2[] = { + { 0xd48, GENMASK(23, 22), 0 }, +}; + +static struct aspeed_sig_desc usb2ad_link[] = { + { 0x440, BIT(24), 0 }, + { 0x440, BIT(25), 1 }, +}; + +static struct aspeed_sig_desc usb2ah_link[] = { + { 0x440, BIT(24), 1 }, + { 0x440, BIT(25), 0 }, +}; + +static struct aspeed_sig_desc usb2bh_link[] = { + { 0x440, BIT(28), 1 }, + { 0x440, BIT(29), 0 }, +}; + +static struct aspeed_sig_desc pcie0rc_link[] = { + { 0x40, BIT(21), 0 }, +}; + +static struct aspeed_sig_desc pcie1rc_link[] = { + { 0x40, BIT(19), 0 }, /* SSPRST# output enable */ + { 0x500, BIT(24), 0 }, /* dedicate rc reset */ +}; + +static const struct aspeed_group_config ast2600_groups[] = { + { "MAC1LINK", ARRAY_SIZE(mac1_link), mac1_link }, + { "MAC2LINK", ARRAY_SIZE(mac2_link), mac2_link }, + { "MAC3LINK", ARRAY_SIZE(mac3_link), mac3_link }, + { "MAC4LINK", ARRAY_SIZE(mac4_link), mac4_link }, + { "RGMII1", ARRAY_SIZE(rgmii1), rgmii1 }, + { "RGMII2", ARRAY_SIZE(rgmii2), rgmii2 }, + { "RGMII3", ARRAY_SIZE(rgmii3), rgmii3 }, + { "RGMII4", ARRAY_SIZE(rgmii4), rgmii4 }, + { "RMII1", ARRAY_SIZE(rmii1), rmii1 }, + { "RMII2", ARRAY_SIZE(rmii2), rmii2 }, + { "RMII3", ARRAY_SIZE(rmii3), rmii3 }, + { "RMII4", ARRAY_SIZE(rmii4), rmii4 }, + { "RMII1RCLK", ARRAY_SIZE(rmii1_rclk_oe), rmii1_rclk_oe }, + { "RMII2RCLK", ARRAY_SIZE(rmii2_rclk_oe), rmii2_rclk_oe }, + { "RMII3RCLK", ARRAY_SIZE(rmii3_rclk_oe), rmii3_rclk_oe }, + { "RMII4RCLK", ARRAY_SIZE(rmii4_rclk_oe), rmii4_rclk_oe }, + { "MDIO1", ARRAY_SIZE(mdio1_link), mdio1_link }, + { "MDIO2", ARRAY_SIZE(mdio2_link), mdio2_link }, + { "MDIO3", ARRAY_SIZE(mdio3_link), mdio3_link }, + { "MDIO4", ARRAY_SIZE(mdio4_link), mdio4_link }, + { "SD1", ARRAY_SIZE(sdio1_link), sdio1_link }, + { "SD1_8bits", ARRAY_SIZE(sdio1_8bit_link), sdio1_8bit_link }, + { "SD2", ARRAY_SIZE(sdio2_link), sdio2_link }, + { "EMMC", ARRAY_SIZE(emmc_link), emmc_link }, + { "EMMCG8", ARRAY_SIZE(emmcg8_link), emmcg8_link }, + { "FMCQUAD", ARRAY_SIZE(fmcquad_link), fmcquad_link }, + { "SPI1", ARRAY_SIZE(spi1_link), spi1_link }, + { "SPI1ABR", ARRAY_SIZE(spi1abr_link), spi1abr_link }, + { "SPI1CS1", ARRAY_SIZE(spi1cs1_link), spi1cs1_link }, + { "SPI1WP", ARRAY_SIZE(spi1wp_link), spi1wp_link }, + { "SPI1QUAD", ARRAY_SIZE(spi1quad_link), spi1quad_link }, + { "SPI2", ARRAY_SIZE(spi2_link), spi2_link }, + { "SPI2CS1", ARRAY_SIZE(spi2cs1_link), spi2cs1_link }, + { "SPI2CS2", ARRAY_SIZE(spi2cs2_link), spi2cs2_link }, + { "SPI2QUAD", ARRAY_SIZE(spi2quad_link), spi2quad_link }, + { "I2C1", ARRAY_SIZE(i2c1_link), i2c1_link }, + { "I2C2", ARRAY_SIZE(i2c2_link), i2c2_link }, + { "I2C3", ARRAY_SIZE(i2c3_link), i2c3_link }, + { "I2C4", ARRAY_SIZE(i2c4_link), i2c4_link }, + { "I2C5", ARRAY_SIZE(i2c5_link), i2c5_link }, + { "I2C6", ARRAY_SIZE(i2c6_link), i2c6_link }, + { "I2C7", ARRAY_SIZE(i2c7_link), i2c7_link }, + { "I2C8", ARRAY_SIZE(i2c8_link), i2c8_link }, + { "I2C9", ARRAY_SIZE(i2c9_link), i2c9_link }, + { "I2C10", ARRAY_SIZE(i2c10_link), i2c10_link }, + { "I2C11", ARRAY_SIZE(i2c11_link), i2c11_link }, + { "I2C12", ARRAY_SIZE(i2c12_link), i2c12_link }, + { "I2C13", ARRAY_SIZE(i2c13_link), i2c13_link }, + { "I2C14", ARRAY_SIZE(i2c14_link), i2c14_link }, + { "I2C15", ARRAY_SIZE(i2c15_link), i2c15_link }, + { "I2C16", ARRAY_SIZE(i2c16_link), i2c16_link }, + { "FSI1", ARRAY_SIZE(fsi1), fsi1 }, + { "FSI2", ARRAY_SIZE(fsi2), fsi2 }, + { "USB2AD", ARRAY_SIZE(usb2ad_link), usb2ad_link }, + { "USB2AH", ARRAY_SIZE(usb2ah_link), usb2ah_link }, + { "USB2BH", ARRAY_SIZE(usb2bh_link), usb2bh_link }, + { "PCIE0RC", ARRAY_SIZE(pcie0rc_link), pcie0rc_link }, + { "PCIE1RC", ARRAY_SIZE(pcie1rc_link), pcie1rc_link }, +}; + +static int ast2600_pinctrl_get_groups_count(struct udevice *dev) +{ + debug("PINCTRL: get_(functions/groups)_count\n"); + + return ARRAY_SIZE(ast2600_groups); +} + +static const char *ast2600_pinctrl_get_group_name(struct udevice *dev, + unsigned selector) +{ + debug("PINCTRL: get_(function/group)_name %u\n", selector); + + return ast2600_groups[selector].group_name; +} + +static int ast2600_pinctrl_group_set(struct udevice *dev, unsigned selector, unsigned func_selector) +{ + struct ast2600_pinctrl_priv *priv = dev_get_priv(dev); + const struct aspeed_group_config *config; + const struct aspeed_sig_desc *descs; + u32 ctrl_reg = (u32)priv->scu; + u32 i; + + debug("PINCTRL: group_set <%u, %u>\n", selector, func_selector); + if (selector >= ARRAY_SIZE(ast2600_groups)) + return -EINVAL; + + config = &ast2600_groups[selector]; + for (i = 0; i < config->ndescs; i++) { + descs = &config->descs[i]; + if (descs->clr) + clrbits_le32((u32)ctrl_reg + descs->offset, descs->reg_set); + else + setbits_le32((u32)ctrl_reg + descs->offset, descs->reg_set); + } + + return 0; +} + +static struct pinctrl_ops ast2600_pinctrl_ops = { + .set_state = pinctrl_generic_set_state, + .get_groups_count = ast2600_pinctrl_get_groups_count, + .get_group_name = ast2600_pinctrl_get_group_name, + .get_functions_count = ast2600_pinctrl_get_groups_count, + .get_function_name = ast2600_pinctrl_get_group_name, + .pinmux_group_set = ast2600_pinctrl_group_set, +}; + +static const struct udevice_id ast2600_pinctrl_ids[] = { + { .compatible = "aspeed,g6-pinctrl" }, + { } +}; + +U_BOOT_DRIVER(pinctrl_aspeed) = { + .name = "aspeed_ast2600_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = ast2600_pinctrl_ids, + .priv_auto = sizeof(struct ast2600_pinctrl_priv), + .ops = &ast2600_pinctrl_ops, + .probe = ast2600_pinctrl_probe, +}; diff --git a/drivers/pinctrl/pinctrl-apple.c b/drivers/pinctrl/pinctrl-apple.c new file mode 100644 index 0000000..6247635 --- /dev/null +++ b/drivers/pinctrl/pinctrl-apple.c @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org> + */ + +#include <common.h> +#include <dm.h> +#include <dm/device-internal.h> +#include <dm/pinctrl.h> +#include <dt-bindings/pinctrl/apple.h> +#include <asm/io.h> +#include <asm-generic/gpio.h> +#include <linux/bitfield.h> + +struct apple_pinctrl_priv { + void *base; + int pin_count; +}; + +#define REG_GPIO(x) (4 * (x)) +#define REG_GPIO_DATA BIT(0) +#define REG_GPIO_MODE GENMASK(3, 1) +#define REG_GPIO_OUT 1 +#define REG_GPIO_PERIPH GENMASK(6, 5) +#define REG_GPIO_INPUT_ENABLE BIT(9) + +static void apple_pinctrl_config_pin(struct apple_pinctrl_priv *priv, + unsigned pin, u32 clr, u32 set) +{ + unsigned reg = REG_GPIO(pin); + u32 old, new; + + old = readl(priv->base + REG_GPIO(pin)); + new = (old & ~clr) | set; + writel(new, priv->base + reg); +} + +static int apple_gpio_get_value(struct udevice *dev, unsigned offset) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev->parent); + + return !!(readl(priv->base + REG_GPIO(offset)) & REG_GPIO_DATA); +} + +static int apple_gpio_set_value(struct udevice *dev, unsigned offset, + int value) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev->parent); + + apple_pinctrl_config_pin(priv, offset, REG_GPIO_DATA, + value ? REG_GPIO_DATA : 0); + return 0; +} + +static int apple_gpio_get_direction(struct udevice *dev, unsigned offset) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev->parent); + u32 reg = readl(priv->base + REG_GPIO(offset)); + + if (FIELD_GET(REG_GPIO_MODE, reg) == REG_GPIO_OUT) + return GPIOF_OUTPUT; + else + return GPIOF_INPUT; +} + +static int apple_gpio_direction_input(struct udevice *dev, unsigned offset) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev->parent); + + apple_pinctrl_config_pin(priv, offset, + REG_GPIO_PERIPH | REG_GPIO_MODE, + REG_GPIO_INPUT_ENABLE); + return 0; +} + +static int apple_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev->parent); + u32 set = (value ? REG_GPIO_DATA : 0); + + apple_pinctrl_config_pin(priv, offset, REG_GPIO_DATA | + REG_GPIO_PERIPH | REG_GPIO_MODE, + set | FIELD_PREP(REG_GPIO_MODE, REG_GPIO_OUT)); + return 0; +} + +static int apple_gpio_probe(struct udevice *dev) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev->parent); + struct gpio_dev_priv *uc_priv; + + uc_priv = dev_get_uclass_priv(dev); + uc_priv->bank_name = "gpio"; + uc_priv->gpio_count = priv->pin_count; + + return 0; +} + +static struct dm_gpio_ops apple_gpio_ops = { + .get_value = apple_gpio_get_value, + .set_value = apple_gpio_set_value, + .get_function = apple_gpio_get_direction, + .direction_input = apple_gpio_direction_input, + .direction_output = apple_gpio_direction_output, +}; + +static struct driver apple_gpio_driver = { + .name = "apple_gpio", + .id = UCLASS_GPIO, + .probe = apple_gpio_probe, + .ops = &apple_gpio_ops, +}; + +static int apple_pinctrl_get_pins_count(struct udevice *dev) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev); + + return priv->pin_count; +} + +static const char *apple_pinctrl_get_pin_name(struct udevice *dev, + unsigned selector) +{ + static char pin_name[PINNAME_SIZE]; + + snprintf(pin_name, PINNAME_SIZE, "pin%d", selector); + return pin_name; +} + +static int apple_pinctrl_get_pin_muxing(struct udevice *dev, unsigned selector, + char *buf, int size) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev); + + if (readl(priv->base + REG_GPIO(selector)) & REG_GPIO_PERIPH) + strncpy(buf, "periph", size); + else + strncpy(buf, "gpio", size); + return 0; +} + +static int apple_pinctrl_pinmux_set(struct udevice *dev, unsigned pin_selector, + unsigned func_selector) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev); + + apple_pinctrl_config_pin(priv, pin_selector, + REG_GPIO_DATA | REG_GPIO_MODE, + FIELD_PREP(REG_GPIO_PERIPH, func_selector) | + REG_GPIO_INPUT_ENABLE); + return 0; +} + +static int apple_pinctrl_pinmux_property_set(struct udevice *dev, + u32 pinmux_group) +{ + unsigned pin_selector = APPLE_PIN(pinmux_group); + unsigned func_selector = APPLE_FUNC(pinmux_group); + int ret; + + ret = apple_pinctrl_pinmux_set(dev, pin_selector, func_selector); + return ret ? ret : pin_selector; +} + +static int apple_pinctrl_probe(struct udevice *dev) +{ + struct apple_pinctrl_priv *priv = dev_get_priv(dev); + struct ofnode_phandle_args args; + struct udevice *child; + + priv->base = dev_read_addr_ptr(dev); + if (!priv->base) + return -EINVAL; + + if (!dev_read_phandle_with_args(dev, "gpio-ranges", + NULL, 3, 0, &args)) + priv->pin_count = args.args[2]; + + device_bind(dev, &apple_gpio_driver, "apple_gpio", NULL, + dev_ofnode(dev), &child); + + return 0; +} + +static struct pinctrl_ops apple_pinctrl_ops = { + .set_state = pinctrl_generic_set_state, + .get_pins_count = apple_pinctrl_get_pins_count, + .get_pin_name = apple_pinctrl_get_pin_name, + .pinmux_set = apple_pinctrl_pinmux_set, + .pinmux_property_set = apple_pinctrl_pinmux_property_set, + .get_pin_muxing = apple_pinctrl_get_pin_muxing, +}; + +static const struct udevice_id apple_pinctrl_ids[] = { + { .compatible = "apple,pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(pinctrl_apple) = { + .name = "apple_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = apple_pinctrl_ids, + .priv_auto = sizeof(struct apple_pinctrl_priv), + .ops = &apple_pinctrl_ops, + .probe = apple_pinctrl_probe, +}; diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c index fe7a59d..509e2a8 100644 --- a/drivers/pinctrl/pinctrl-stmfx.c +++ b/drivers/pinctrl/pinctrl-stmfx.c @@ -5,8 +5,12 @@ * Driver for STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander * based on Linux driver : pinctrl/pinctrl-stmfx.c */ + +#define LOG_CATEGORY UCLASS_PINCTRL + #include <common.h> #include <dm.h> +#include <log.h> #include <i2c.h> #include <asm/gpio.h> #include <dm/device.h> diff --git a/drivers/power/regulator/scmi_regulator.c b/drivers/power/regulator/scmi_regulator.c index b3142bf..3ddeaf4 100644 --- a/drivers/power/regulator/scmi_regulator.c +++ b/drivers/power/regulator/scmi_regulator.c @@ -2,6 +2,9 @@ /* * Copyright (C) 2020-2021 Linaro Limited */ + +#define LOG_CATEGORY UCLASS_REGULATOR + #include <common.h> #include <dm.h> #include <errno.h> diff --git a/drivers/ram/stm32mp1/Makefile b/drivers/ram/stm32mp1/Makefile index e1e9135..71ded6b 100644 --- a/drivers/ram/stm32mp1/Makefile +++ b/drivers/ram/stm32mp1/Makefile @@ -8,7 +8,6 @@ obj-y += stm32mp1_ddr.o obj-$(CONFIG_STM32MP1_DDR_INTERACTIVE) += stm32mp1_interactive.o obj-$(CONFIG_STM32MP1_DDR_TESTS) += stm32mp1_tests.o -obj-$(CONFIG_STM32MP1_DDR_TUNING) += stm32mp1_tuning.o ifneq ($(DDR_INTERACTIVE),) CFLAGS_stm32mp1_interactive.o += -DCONFIG_STM32MP1_DDR_INTERACTIVE_FORCE=y diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index 0457166..4d78aa5 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -68,7 +68,6 @@ struct reg_desc { #define DDRPHY_REG_REG_SIZE 11 /* st,phy-reg */ #define DDRPHY_REG_TIMING_SIZE 10 /* st,phy-timing */ -#define DDRPHY_REG_CAL_SIZE 12 /* st,phy-cal */ #define DDRCTL_REG_REG(x) DDRCTL_REG(x, stm32mp1_ddrctrl_reg) static const struct reg_desc ddr_reg[DDRCTL_REG_REG_SIZE] = { @@ -178,22 +177,6 @@ static const struct reg_desc ddrphy_timing[DDRPHY_REG_TIMING_SIZE] = { DDRPHY_REG_TIMING(mr3), }; -#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal) -static const struct reg_desc ddrphy_cal[DDRPHY_REG_CAL_SIZE] = { - DDRPHY_REG_CAL(dx0dllcr), - DDRPHY_REG_CAL(dx0dqtr), - DDRPHY_REG_CAL(dx0dqstr), - DDRPHY_REG_CAL(dx1dllcr), - DDRPHY_REG_CAL(dx1dqtr), - DDRPHY_REG_CAL(dx1dqstr), - DDRPHY_REG_CAL(dx2dllcr), - DDRPHY_REG_CAL(dx2dqtr), - DDRPHY_REG_CAL(dx2dqstr), - DDRPHY_REG_CAL(dx3dllcr), - DDRPHY_REG_CAL(dx3dqtr), - DDRPHY_REG_CAL(dx3dqstr), -}; - /************************************************************** * DYNAMIC REGISTERS: only used for debug purpose (read/modify) **************************************************************/ @@ -218,12 +201,24 @@ static const struct reg_desc ddrphy_dyn[] = { DDRPHY_REG_DYN(zq0sr1), DDRPHY_REG_DYN(dx0gsr0), DDRPHY_REG_DYN(dx0gsr1), + DDRPHY_REG_DYN(dx0dllcr), + DDRPHY_REG_DYN(dx0dqtr), + DDRPHY_REG_DYN(dx0dqstr), DDRPHY_REG_DYN(dx1gsr0), DDRPHY_REG_DYN(dx1gsr1), + DDRPHY_REG_DYN(dx1dllcr), + DDRPHY_REG_DYN(dx1dqtr), + DDRPHY_REG_DYN(dx1dqstr), DDRPHY_REG_DYN(dx2gsr0), DDRPHY_REG_DYN(dx2gsr1), + DDRPHY_REG_DYN(dx2dllcr), + DDRPHY_REG_DYN(dx2dqtr), + DDRPHY_REG_DYN(dx2dqstr), DDRPHY_REG_DYN(dx3gsr0), DDRPHY_REG_DYN(dx3gsr1), + DDRPHY_REG_DYN(dx3dllcr), + DDRPHY_REG_DYN(dx3dqtr), + DDRPHY_REG_DYN(dx3dqstr), }; #define DDRPHY_REG_DYN_SIZE ARRAY_SIZE(ddrphy_dyn) @@ -240,7 +235,6 @@ enum reg_type { REG_MAP, REGPHY_REG, REGPHY_TIMING, - REGPHY_CAL, #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE /* dynamic registers => managed in driver or not changed, * can be dumped in interactive mode @@ -264,8 +258,6 @@ struct ddr_reg_info { enum base_type base; }; -#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal) - const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { [REG_REG] = { "static", ddr_reg, DDRCTL_REG_REG_SIZE, DDR_BASE}, @@ -279,8 +271,6 @@ const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { "static", ddrphy_reg, DDRPHY_REG_REG_SIZE, DDRPHY_BASE}, [REGPHY_TIMING] = { "timing", ddrphy_timing, DDRPHY_REG_TIMING_SIZE, DDRPHY_BASE}, -[REGPHY_CAL] = { - "cal", ddrphy_cal, DDRPHY_REG_CAL_SIZE, DDRPHY_BASE}, #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE [REG_DYN] = { "dyn", ddr_dyn, DDR_REG_DYN_SIZE, DDR_BASE}, @@ -456,9 +446,6 @@ static u32 get_par_addr(const struct stm32mp1_ddr_config *config, case REGPHY_TIMING: par_addr = (u32)&config->p_timing; break; - case REGPHY_CAL: - par_addr = (u32)&config->p_cal; - break; case REG_DYN: case REGPHY_DYN: case REG_TYPE_NB: @@ -570,7 +557,7 @@ static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy) (u32)&phy->pgsr, pgsr, ret); } -void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) +static void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) { pir |= DDRPHYC_PIR_INIT; writel(pir, &phy->pir); @@ -639,7 +626,7 @@ static void wait_operating_mode(struct ddr_info *priv, int mode) log_debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat); } -void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) +static void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) { start_sw_done(ctl); /* quasi-dynamic register update*/ @@ -650,8 +637,8 @@ void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) wait_sw_done_ack(ctl); } -void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, - u32 rfshctl3, u32 pwrctl) +static void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, + u32 rfshctl3, u32 pwrctl) { start_sw_done(ctl); if (!(rfshctl3 & DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH)) @@ -774,8 +761,6 @@ start: */ set_reg(priv, REGPHY_REG, &config->p_reg); set_reg(priv, REGPHY_TIMING, &config->p_timing); - if (config->p_cal_present) - set_reg(priv, REGPHY_CAL, &config->p_cal); if (INTERACTIVE(STEP_PHY_INIT)) goto start; @@ -810,32 +795,32 @@ start: wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL); - if (config->p_cal_present) { - log_debug("DDR DQS training skipped.\n"); - } else { - log_debug("DDR DQS training : "); + log_debug("DDR DQS training : "); /* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0 * - DFIMISC.dfiinit_complete_en = 0 */ - stm32mp1_refresh_disable(priv->ctl); + stm32mp1_refresh_disable(priv->ctl); /* 9. Program PUBL PGCR to enable refresh during training and rank to train * not done => keep the programed value in PGCR */ /* 10. configure PUBL PIR register to specify which training step to run */ - /* warning : RVTRN is not supported by this PUBL */ - stm32mp1_ddrphy_init(priv->phy, DDRPHYC_PIR_QSTRN); + /* RVTRN is excuted only on LPDDR2/LPDDR3 */ + if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) + pir = DDRPHYC_PIR_QSTRN; + else + pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN; + stm32mp1_ddrphy_init(priv->phy, pir); /* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */ - ddrphy_idone_wait(priv->phy); + ddrphy_idone_wait(priv->phy); /* 12. set back registers in step 8 to the orginal values if desidered */ - stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, - config->c_reg.pwrctl); - } /* if (config->p_cal_present) */ + stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, + config->c_reg.pwrctl); /* enable uMCTL2 AXI port 0 and 1 */ setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN); diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.h b/drivers/ram/stm32mp1/stm32mp1_ddr.h index 4998f04..861efff 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.h @@ -140,21 +140,6 @@ struct stm32mp1_ddrphy_timing { u32 mr3; }; -struct stm32mp1_ddrphy_cal { - u32 dx0dllcr; - u32 dx0dqtr; - u32 dx0dqstr; - u32 dx1dllcr; - u32 dx1dqtr; - u32 dx1dqstr; - u32 dx2dllcr; - u32 dx2dqtr; - u32 dx2dqstr; - u32 dx3dllcr; - u32 dx3dqtr; - u32 dx3dqstr; -}; - struct stm32mp1_ddr_info { const char *name; u32 speed; /* in kHZ */ @@ -169,16 +154,9 @@ struct stm32mp1_ddr_config { struct stm32mp1_ddrctrl_perf c_perf; struct stm32mp1_ddrphy_reg p_reg; struct stm32mp1_ddrphy_timing p_timing; - struct stm32mp1_ddrphy_cal p_cal; - bool p_cal_present; }; int stm32mp1_ddr_clk_enable(struct ddr_info *priv, u32 mem_speed); -void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir); -void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl); -void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, - u32 rfshctl3, - u32 pwrctl); void stm32mp1_ddr_init( struct ddr_info *priv, diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h index 3c8885a..f1a26e3 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h @@ -6,8 +6,9 @@ #ifndef _RAM_STM32MP1_DDR_REGS_H #define _RAM_STM32MP1_DDR_REGS_H -/* DDR3/LPDDR2/LPDDR3 Controller (DDRCTRL) registers */ #include <linux/bitops.h> + +/* DDR3/LPDDR2/LPDDR3 Controller (DDRCTRL) registers */ struct stm32mp1_ddrctl { u32 mstr ; /* 0x0 Master*/ u32 stat; /* 0x4 Operating Mode Status*/ @@ -238,6 +239,7 @@ struct stm32mp1_ddrphy { #define DDRCTRL_MSTR_LPDDR2 BIT(2) #define DDRCTRL_MSTR_LPDDR3 BIT(3) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK GENMASK(13, 12) +#define DDRCTRL_MSTR_DATA_BUS_WIDTH_SHIFT 12 #define DDRCTRL_MSTR_DATA_BUS_WIDTH_FULL (0 << 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF (1 << 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER (2 << 12) @@ -275,25 +277,6 @@ struct stm32mp1_ddrphy { #define DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN BIT(0) -#define DDRCTRL_DBG1_DIS_HIF BIT(1) - -#define DDRCTRL_DBGCAM_WR_DATA_PIPELINE_EMPTY BIT(29) -#define DDRCTRL_DBGCAM_RD_DATA_PIPELINE_EMPTY BIT(28) -#define DDRCTRL_DBGCAM_DBG_WR_Q_EMPTY BIT(26) -#define DDRCTRL_DBGCAM_DBG_LPR_Q_DEPTH GENMASK(12, 8) -#define DDRCTRL_DBGCAM_DBG_HPR_Q_DEPTH GENMASK(4, 0) -#define DDRCTRL_DBGCAM_DATA_PIPELINE_EMPTY \ - (DDRCTRL_DBGCAM_WR_DATA_PIPELINE_EMPTY | \ - DDRCTRL_DBGCAM_RD_DATA_PIPELINE_EMPTY) -#define DDRCTRL_DBGCAM_DBG_Q_DEPTH \ - (DDRCTRL_DBGCAM_DBG_WR_Q_EMPTY | \ - DDRCTRL_DBGCAM_DBG_LPR_Q_DEPTH | \ - DDRCTRL_DBGCAM_DBG_HPR_Q_DEPTH) - -#define DDRCTRL_DBGCMD_RANK0_REFRESH BIT(0) - -#define DDRCTRL_DBGSTAT_RANK0_REFRESH_BUSY BIT(0) - #define DDRCTRL_SWCTL_SW_DONE BIT(0) #define DDRCTRL_SWSTAT_SW_DONE_ACK BIT(0) @@ -309,13 +292,9 @@ struct stm32mp1_ddrphy { #define DDRPHYC_PIR_DRAMRST BIT(5) #define DDRPHYC_PIR_DRAMINIT BIT(6) #define DDRPHYC_PIR_QSTRN BIT(7) +#define DDRPHYC_PIR_RVTRN BIT(8) #define DDRPHYC_PIR_ICPC BIT(16) #define DDRPHYC_PIR_ZCALBYP BIT(30) -#define DDRPHYC_PIR_INITSTEPS_MASK GENMASK(31, 7) - -#define DDRPHYC_PGCR_DFTCMP BIT(2) -#define DDRPHYC_PGCR_PDDISDX BIT(24) -#define DDRPHYC_PGCR_RFSHDT_MASK GENMASK(28, 25) #define DDRPHYC_PGSR_IDONE BIT(0) #define DDRPHYC_PGSR_DTERR BIT(5) @@ -324,43 +303,6 @@ struct stm32mp1_ddrphy { #define DDRPHYC_PGSR_RVERR BIT(8) #define DDRPHYC_PGSR_RVEIRR BIT(9) -#define DDRPHYC_DLLGCR_BPS200 BIT(23) - -#define DDRPHYC_ACDLLCR_DLLDIS BIT(31) - -#define DDRPHYC_ZQ0CRN_ZDATA_MASK GENMASK(27, 0) -#define DDRPHYC_ZQ0CRN_ZDATA_SHIFT 0 -#define DDRPHYC_ZQ0CRN_ZDEN BIT(28) - -#define DDRPHYC_DXNGCR_DXEN BIT(0) - -#define DDRPHYC_DXNDLLCR_DLLSRST BIT(30) -#define DDRPHYC_DXNDLLCR_DLLDIS BIT(31) -#define DDRPHYC_DXNDLLCR_SDPHASE_MASK GENMASK(17, 14) -#define DDRPHYC_DXNDLLCR_SDPHASE_SHIFT 14 - -#define DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit) (4 * (bit)) -#define DDRPHYC_DXNDQTR_DQDLY_MASK GENMASK(3, 0) -#define DDRPHYC_DXNDQTR_DQDLY_LOW_MASK GENMASK(1, 0) -#define DDRPHYC_DXNDQTR_DQDLY_HIGH_MASK GENMASK(3, 2) - -#define DDRPHYC_DXNDQSTR_DQSDLY_MASK GENMASK(22, 20) -#define DDRPHYC_DXNDQSTR_DQSDLY_SHIFT 20 -#define DDRPHYC_DXNDQSTR_DQSNDLY_MASK GENMASK(25, 23) -#define DDRPHYC_DXNDQSTR_DQSNDLY_SHIFT 23 -#define DDRPHYC_DXNDQSTR_R0DGSL_MASK GENMASK(2, 0) -#define DDRPHYC_DXNDQSTR_R0DGSL_SHIFT 0 -#define DDRPHYC_DXNDQSTR_R0DGPS_MASK GENMASK(13, 12) -#define DDRPHYC_DXNDQSTR_R0DGPS_SHIFT 12 - -#define DDRPHYC_BISTRR_BDXSEL_MASK GENMASK(22, 19) -#define DDRPHYC_BISTRR_BDXSEL_SHIFT 19 - -#define DDRPHYC_BISTGSR_BDDONE BIT(0) -#define DDRPHYC_BISTGSR_BDXERR BIT(2) - -#define DDRPHYC_BISTWCSR_DXWCNT_SHIFT 16 - /* PWR registers */ #define PWR_CR3 0x00C #define PWR_CR3_DDRSRDIS BIT(11) diff --git a/drivers/ram/stm32mp1/stm32mp1_interactive.c b/drivers/ram/stm32mp1/stm32mp1_interactive.c index 8c2310a..f0fe7e6 100644 --- a/drivers/ram/stm32mp1/stm32mp1_interactive.c +++ b/drivers/ram/stm32mp1/stm32mp1_interactive.c @@ -32,7 +32,6 @@ enum ddr_command { DDR_CMD_NEXT, DDR_CMD_GO, DDR_CMD_TEST, - DDR_CMD_TUNING, DDR_CMD_UNKNOWN, }; @@ -60,9 +59,6 @@ enum ddr_command stm32mp1_get_command(char *cmd, int argc) #ifdef CONFIG_STM32MP1_DDR_TESTS [DDR_CMD_TEST] = "test", #endif -#ifdef CONFIG_STM32MP1_DDR_TUNING - [DDR_CMD_TUNING] = "tuning", -#endif }; /* min and max number of argument */ const char cmd_arg[DDR_CMD_UNKNOWN][2] = { @@ -79,9 +75,6 @@ enum ddr_command stm32mp1_get_command(char *cmd, int argc) #ifdef CONFIG_STM32MP1_DDR_TESTS [DDR_CMD_TEST] = { 0, 255 }, #endif -#ifdef CONFIG_STM32MP1_DDR_TUNING - [DDR_CMD_TUNING] = { 0, 255 }, -#endif }; int i; @@ -111,7 +104,7 @@ static void stm32mp1_do_usage(void) "help displays help\n" "info displays DDR information\n" "info <param> <val> changes DDR information\n" - " with <param> = step, name, size, speed or cal\n" + " with <param> = step, name, size or speed\n" "freq displays the DDR PHY frequency in kHz\n" "freq <freq> changes the DDR PHY frequency\n" "param [type|reg] prints input parameters\n" @@ -126,13 +119,10 @@ static void stm32mp1_do_usage(void) #ifdef CONFIG_STM32MP1_DDR_TESTS "test [help] | <n> [...] lists (with help) or executes test <n>\n" #endif -#ifdef CONFIG_STM32MP1_DDR_TUNING - "tuning [help] | <n> [...] lists (with help) or execute tuning <n>\n" -#endif "\nwith for [type|reg]:\n" " all registers if absent\n" " <type> = ctl, phy\n" - " or one category (static, timing, map, perf, cal, dyn)\n" + " or one category (static, timing, map, perf, dyn)\n" " <reg> = name of the register\n" }; @@ -165,7 +155,6 @@ static void stm32mp1_do_info(struct ddr_info *priv, printf("name = %s\n", config->info.name); printf("size = 0x%x\n", config->info.size); printf("speed = %d kHz\n", config->info.speed); - printf("cal = %d\n", config->p_cal_present); return; } @@ -214,16 +203,6 @@ static void stm32mp1_do_info(struct ddr_info *priv, } return; } - if (!strcmp(argv[1], "cal")) { - if (strict_strtoul(argv[2], 10, &value) < 0 || - (value != 0 && value != 1)) { - printf("invalid value %s\n", argv[2]); - } else { - config->p_cal_present = value; - printf("cal = %d\n", config->p_cal_present); - } - return; - } printf("argument %s invalid\n", argv[1]); } @@ -322,7 +301,7 @@ end: return step; } -#if defined(CONFIG_STM32MP1_DDR_TESTS) || defined(CONFIG_STM32MP1_DDR_TUNING) +#if defined(CONFIG_STM32MP1_DDR_TESTS) static const char * const s_result[] = { [TEST_PASSED] = "Pass", [TEST_FAILED] = "Failed", @@ -479,16 +458,6 @@ bool stm32mp1_ddr_interactive(void *priv, stm32mp1_ddr_subcmd(priv, argc, argv, test, test_nb); break; #endif - -#ifdef CONFIG_STM32MP1_DDR_TUNING - case DDR_CMD_TUNING: - if (!stm32mp1_check_step(step, STEP_DDR_READY)) - continue; - stm32mp1_ddr_subcmd(priv, argc, argv, - tuning, tuning_nb); - break; -#endif - default: break; } diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index 98fa1f4..49b1262 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -16,6 +16,12 @@ #include <asm/io.h> #include <dm/device_compat.h> #include "stm32mp1_ddr.h" +#include "stm32mp1_ddr_regs.h" + +/* DDR subsystem configuration */ +struct stm32mp1_ddr_cfg { + u8 nb_bytes; /* MEMC_DRAM_DATA_WIDTH */ +}; static const char *const clkname[] = { "ddrc1", @@ -82,7 +88,7 @@ static ofnode stm32mp1_ddr_get_ofnode(struct udevice *dev) return dev_ofnode(dev); } -static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) +static int stm32mp1_ddr_setup(struct udevice *dev) { struct ddr_info *priv = dev_get_priv(dev); int ret; @@ -95,26 +101,22 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) { .name = x, \ .offset = offsetof(struct stm32mp1_ddr_config, y), \ .size = sizeof(config.y) / sizeof(u32), \ - .present = z, \ } #define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x, NULL) #define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x, NULL) -#define PHY_PARAM_OPT(x) PARAM("st,phy-"#x, p_##x, &config.p_##x##_present) const struct { const char *name; /* name in DT */ const u32 offset; /* offset in config struct */ const u32 size; /* size of parameters */ - bool * const present; /* presence indication for opt */ } param[] = { CTL_PARAM(reg), CTL_PARAM(timing), CTL_PARAM(map), CTL_PARAM(perf), PHY_PARAM(reg), - PHY_PARAM(timing), - PHY_PARAM_OPT(cal) + PHY_PARAM(timing) }; config.info.speed = ofnode_read_u32_default(node, "st,mem-speed", 0); @@ -133,25 +135,11 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) param[idx].size); dev_dbg(dev, "%s: %s[0x%x] = %d\n", __func__, param[idx].name, param[idx].size, ret); - if (ret && - (ret != -FDT_ERR_NOTFOUND || !param[idx].present)) { + if (ret) { dev_err(dev, "Cannot read %s, error=%d\n", param[idx].name, ret); return -EINVAL; } - if (param[idx].present) { - /* save presence of optional parameters */ - *param[idx].present = true; - if (ret == -FDT_ERR_NOTFOUND) { - *param[idx].present = false; -#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE - /* reset values if used later */ - memset((void *)((u32)&config + - param[idx].offset), - 0, param[idx].size * sizeof(u32)); -#endif - } - } } ret = clk_get_by_name(dev, "axidcg", &axidcg); @@ -183,6 +171,183 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) return 0; } +static u8 get_data_bus_width(struct stm32mp1_ddrctl *ctl) +{ + u32 reg = readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK; + u8 data_bus_width = reg >> DDRCTRL_MSTR_DATA_BUS_WIDTH_SHIFT; + + return data_bus_width; +} + +static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl) +{ + /* Count bank address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap1); + /* addrmap1.addrmap_bank_b1 */ + val = (reg & GENMASK(5, 0)) >> 0; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b2 */ + val = (reg & GENMASK(13, 8)) >> 8; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b3 */ + val = (reg & GENMASK(21, 16)) >> 16; + if (val <= 31) + bits++; + + return bits; +} + +static u8 get_nb_col(struct stm32mp1_ddrctl *ctl, u8 data_bus_width) +{ + u8 bits; + u32 reg, val; + + /* Count column address bits, start at 2 for b0 and b1 (fixed) */ + bits = 2; + + reg = readl(&ctl->addrmap2); + /* addrmap2.addrmap_col_b2 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b3 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b4 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b5 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap3); + /* addrmap3.addrmap_col_b6 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b7 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b8 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b9 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap4); + /* addrmap4.addrmap_col_b10 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap4.addrmap_col_b11 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + + /* + * column bits shift up: + * 1 when half the data bus is used (data_bus_width = 1) + * 2 when a quarter the data bus is used (data_bus_width = 2) + * nothing to do for full data bus (data_bus_width = 0) + */ + bits += data_bus_width; + + return bits; +} + +static u8 get_nb_row(struct stm32mp1_ddrctl *ctl) +{ + /* Count row address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap5); + /* addrmap5.addrmap_row_b0 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b1 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b2_10 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 11) + bits += 9; + else + printf("warning: addrmap5.addrmap_row_b2_10 not supported\n"); + /* addrmap5.addrmap_row_b11 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 11) + bits++; + + reg = readl(&ctl->addrmap6); + /* addrmap6.addrmap_row_b12 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b13 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b14 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b15 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + return bits; +} + +/* + * stm32mp1_ddr_size + * + * Get the current DRAM size from the DDR CTL registers + * + * @return: DRAM size + */ +u32 stm32mp1_ddr_size(struct udevice *dev) +{ + u8 nb_bit; + u32 ddr_size; + u8 data_bus_width; + struct ddr_info *priv = dev_get_priv(dev); + struct stm32mp1_ddrctl *ctl = priv->ctl; + struct stm32mp1_ddr_cfg *cfg = (struct stm32mp1_ddr_cfg *)dev_get_driver_data(dev); + const u8 nb_bytes = cfg->nb_bytes; + + data_bus_width = get_data_bus_width(ctl); + nb_bit = get_nb_bank(ctl) + get_nb_col(ctl, data_bus_width) + + get_nb_row(ctl); + if (nb_bit > 32) { + nb_bit = 32; + debug("invalid DDR configuration: %d bits\n", nb_bit); + } + + ddr_size = (nb_bytes >> data_bus_width) << nb_bit; + if (ddr_size > STM32_DDR_SIZE) { + ddr_size = STM32_DDR_SIZE; + debug("invalid DDR configuration: size = %x\n", ddr_size); + } + + return ddr_size; +} + static int stm32mp1_ddr_probe(struct udevice *dev) { struct ddr_info *priv = dev_get_priv(dev); @@ -209,8 +374,8 @@ static int stm32mp1_ddr_probe(struct udevice *dev) return log_ret(ret); } - ofnode node = stm32mp1_ddr_get_ofnode(dev); - priv->info.size = ofnode_read_u32_default(node, "st,mem-size", 0); + priv->info.size = stm32mp1_ddr_size(dev); + return 0; } @@ -227,8 +392,12 @@ static struct ram_ops stm32mp1_ddr_ops = { .get_info = stm32mp1_ddr_get_info, }; +static const struct stm32mp1_ddr_cfg stm32mp15x_ddr_cfg = { + .nb_bytes = 4, +}; + static const struct udevice_id stm32mp1_ddr_ids[] = { - { .compatible = "st,stm32mp1-ddr" }, + { .compatible = "st,stm32mp1-ddr", .data = (ulong)&stm32mp15x_ddr_cfg}, { } }; diff --git a/drivers/ram/stm32mp1/stm32mp1_tests.h b/drivers/ram/stm32mp1/stm32mp1_tests.h index 55f5d6d..8436780 100644 --- a/drivers/ram/stm32mp1/stm32mp1_tests.h +++ b/drivers/ram/stm32mp1/stm32mp1_tests.h @@ -28,7 +28,4 @@ struct test_desc { extern const struct test_desc test[]; extern const int test_nb; -extern const struct test_desc tuning[]; -extern const int tuning_nb; - #endif diff --git a/drivers/ram/stm32mp1/stm32mp1_tuning.c b/drivers/ram/stm32mp1/stm32mp1_tuning.c deleted file mode 100644 index c8cd7c3..0000000 --- a/drivers/ram/stm32mp1/stm32mp1_tuning.c +++ /dev/null @@ -1,1540 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause -/* - * Copyright (C) 2019, STMicroelectronics - All Rights Reserved - */ - -#define LOG_CATEGORY UCLASS_RAM - -#include <common.h> -#include <console.h> -#include <clk.h> -#include <log.h> -#include <ram.h> -#include <rand.h> -#include <reset.h> -#include <asm/io.h> -#include <linux/bitops.h> -#include <linux/delay.h> -#include <linux/iopoll.h> - -#include "stm32mp1_ddr_regs.h" -#include "stm32mp1_ddr.h" -#include "stm32mp1_tests.h" - -#define MAX_DQS_PHASE_IDX _144deg -#define MAX_DQS_UNIT_IDX 7 -#define MAX_GSL_IDX 5 -#define MAX_GPS_IDX 3 - -/* Number of bytes used in this SW. ( min 1--> max 4). */ -#define NUM_BYTES 4 - -enum dqs_phase_enum { - _36deg = 0, - _54deg = 1, - _72deg = 2, - _90deg = 3, - _108deg = 4, - _126deg = 5, - _144deg = 6 -}; - -/* BIST Result struct */ -struct BIST_result { - /* Overall test result: - * 0 Fail (any bit failed) , - * 1 Success (All bits success) - */ - bool test_result; - /* 1: true, all fail / 0: False, not all bits fail */ - bool all_bits_fail; - bool bit_i_test_result[8]; /* 0 fail / 1 success */ -}; - -/* a struct that defines tuning parameters of a byte. */ -struct tuning_position { - u8 phase; /* DQS phase */ - u8 unit; /* DQS unit delay */ - u32 bits_delay; /* Bits deskew in this byte */ -}; - -/* 36deg, 54deg, 72deg, 90deg, 108deg, 126deg, 144deg */ -const u8 dx_dll_phase[7] = {3, 2, 1, 0, 14, 13, 12}; - -static u8 BIST_error_max = 1; -static u32 BIST_seed = 0x1234ABCD; - -static u8 get_nb_bytes(struct stm32mp1_ddrctl *ctl) -{ - u32 data_bus = readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK; - u8 nb_bytes = NUM_BYTES; - - switch (data_bus) { - case DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF: - nb_bytes /= 2; - break; - case DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER: - nb_bytes /= 4; - break; - default: - break; - } - - return nb_bytes; -} - -static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl) -{ - /* Count bank address bits */ - u8 bits = 0; - u32 reg, val; - - reg = readl(&ctl->addrmap1); - /* addrmap1.addrmap_bank_b1 */ - val = (reg & GENMASK(5, 0)) >> 0; - if (val <= 31) - bits++; - /* addrmap1.addrmap_bank_b2 */ - val = (reg & GENMASK(13, 8)) >> 8; - if (val <= 31) - bits++; - /* addrmap1.addrmap_bank_b3 */ - val = (reg & GENMASK(21, 16)) >> 16; - if (val <= 31) - bits++; - - return bits; -} - -static u8 get_nb_col(struct stm32mp1_ddrctl *ctl) -{ - u8 bits; - u32 reg, val; - - /* Count column address bits, start at 2 for b0 and b1 (fixed) */ - bits = 2; - - reg = readl(&ctl->addrmap2); - /* addrmap2.addrmap_col_b2 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 7) - bits++; - /* addrmap2.addrmap_col_b3 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 7) - bits++; - /* addrmap2.addrmap_col_b4 */ - val = (reg & GENMASK(19, 16)) >> 16; - if (val <= 7) - bits++; - /* addrmap2.addrmap_col_b5 */ - val = (reg & GENMASK(27, 24)) >> 24; - if (val <= 7) - bits++; - - reg = readl(&ctl->addrmap3); - /* addrmap3.addrmap_col_b6 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 7) - bits++; - /* addrmap3.addrmap_col_b7 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 7) - bits++; - /* addrmap3.addrmap_col_b8 */ - val = (reg & GENMASK(19, 16)) >> 16; - if (val <= 7) - bits++; - /* addrmap3.addrmap_col_b9 */ - val = (reg & GENMASK(27, 24)) >> 24; - if (val <= 7) - bits++; - - reg = readl(&ctl->addrmap4); - /* addrmap4.addrmap_col_b10 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 7) - bits++; - /* addrmap4.addrmap_col_b11 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 7) - bits++; - - return bits; -} - -static u8 get_nb_row(struct stm32mp1_ddrctl *ctl) -{ - /* Count row address bits */ - u8 bits = 0; - u32 reg, val; - - reg = readl(&ctl->addrmap5); - /* addrmap5.addrmap_row_b0 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 11) - bits++; - /* addrmap5.addrmap_row_b1 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 11) - bits++; - /* addrmap5.addrmap_row_b2_10 */ - val = (reg & GENMASK(19, 16)) >> 16; - if (val <= 11) - bits += 9; - else - printf("warning: addrmap5.addrmap_row_b2_10 not supported\n"); - /* addrmap5.addrmap_row_b11 */ - val = (reg & GENMASK(27, 24)) >> 24; - if (val <= 11) - bits++; - - reg = readl(&ctl->addrmap6); - /* addrmap6.addrmap_row_b12 */ - val = (reg & GENMASK(3, 0)) >> 0; - if (val <= 7) - bits++; - /* addrmap6.addrmap_row_b13 */ - val = (reg & GENMASK(11, 8)) >> 8; - if (val <= 7) - bits++; - /* addrmap6.addrmap_row_b14 */ - val = (reg & GENMASK(19, 16)) >> 16; - if (val <= 7) - bits++; - /* addrmap6.addrmap_row_b15 */ - val = (reg & GENMASK(27, 24)) >> 24; - if (val <= 7) - bits++; - - return bits; -} - -static void itm_soft_reset(struct stm32mp1_ddrphy *phy) -{ - stm32mp1_ddrphy_init(phy, DDRPHYC_PIR_ITMSRST); -} - -/* Read DQ unit delay register and provides the retrieved value for DQS - * We are assuming that we have the same delay when clocking - * by DQS and when clocking by DQSN - */ -static u8 DQ_unit_index(struct stm32mp1_ddrphy *phy, u8 byte, u8 bit) -{ - u32 index; - u32 addr = DXNDQTR(phy, byte); - - /* We are assuming that we have the same delay when clocking by DQS - * and when clocking by DQSN : use only the low bits - */ - index = (readl(addr) >> DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit)) - & DDRPHYC_DXNDQTR_DQDLY_LOW_MASK; - - log_debug("[%x]: %x => DQ unit index = %x\n", addr, readl(addr), index); - - return index; -} - -/* Sets the DQS phase delay for a byte lane. - *phase delay is specified by giving the index of the desired delay - * in the dx_dll_phase array. - */ -static void DQS_phase_delay(struct stm32mp1_ddrphy *phy, u8 byte, u8 phase_idx) -{ - u8 sdphase_val = 0; - - /* Write DXNDLLCR.SDPHASE = dx_dll_phase(phase_index); */ - sdphase_val = dx_dll_phase[phase_idx]; - clrsetbits_le32(DXNDLLCR(phy, byte), - DDRPHYC_DXNDLLCR_SDPHASE_MASK, - sdphase_val << DDRPHYC_DXNDLLCR_SDPHASE_SHIFT); -} - -/* Sets the DQS unit delay for a byte lane. - * unit delay is specified by giving the index of the desired delay - * for dgsdly and dqsndly (same value). - */ -static void DQS_unit_delay(struct stm32mp1_ddrphy *phy, - u8 byte, u8 unit_dly_idx) -{ - /* Write the same value in DXNDQSTR.DQSDLY and DXNDQSTR.DQSNDLY */ - clrsetbits_le32(DXNDQSTR(phy, byte), - DDRPHYC_DXNDQSTR_DQSDLY_MASK | - DDRPHYC_DXNDQSTR_DQSNDLY_MASK, - (unit_dly_idx << DDRPHYC_DXNDQSTR_DQSDLY_SHIFT) | - (unit_dly_idx << DDRPHYC_DXNDQSTR_DQSNDLY_SHIFT)); - - /* After changing this value, an ITM soft reset (PIR.ITMSRST=1, - * plus PIR.INIT=1) must be issued. - */ - stm32mp1_ddrphy_init(phy, DDRPHYC_PIR_ITMSRST); -} - -/* Sets the DQ unit delay for a bit line in particular byte lane. - * unit delay is specified by giving the desired delay - */ -static void set_DQ_unit_delay(struct stm32mp1_ddrphy *phy, - u8 byte, u8 bit, - u8 dq_delay_index) -{ - u8 dq_bit_delay_val = dq_delay_index | (dq_delay_index << 2); - - /* same value on delay for clock DQ an DQS_b */ - clrsetbits_le32(DXNDQTR(phy, byte), - DDRPHYC_DXNDQTR_DQDLY_MASK - << DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit), - dq_bit_delay_val << DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit)); -} - -static void set_r0dgsl_delay(struct stm32mp1_ddrphy *phy, - u8 byte, u8 r0dgsl_idx) -{ - clrsetbits_le32(DXNDQSTR(phy, byte), - DDRPHYC_DXNDQSTR_R0DGSL_MASK, - r0dgsl_idx << DDRPHYC_DXNDQSTR_R0DGSL_SHIFT); -} - -static void set_r0dgps_delay(struct stm32mp1_ddrphy *phy, - u8 byte, u8 r0dgps_idx) -{ - clrsetbits_le32(DXNDQSTR(phy, byte), - DDRPHYC_DXNDQSTR_R0DGPS_MASK, - r0dgps_idx << DDRPHYC_DXNDQSTR_R0DGPS_SHIFT); -} - -/* Basic BIST configuration for data lane tests. */ -static void config_BIST(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy) -{ - u8 nb_bank = get_nb_bank(ctl); - u8 nb_row = get_nb_row(ctl); - u8 nb_col = get_nb_col(ctl); - - /* Selects the SDRAM bank address to be used during BIST. */ - u32 bbank = 0; - /* Selects the SDRAM row address to be used during BIST. */ - u32 brow = 0; - /* Selects the SDRAM column address to be used during BIST. */ - u32 bcol = 0; - /* Selects the value by which the SDRAM address is incremented - * for each write/read access. - */ - u32 bainc = 0x00000008; - /* Specifies the maximum SDRAM rank to be used during BIST. - * The default value is set to maximum ranks minus 1. - * must be 0 with single rank - */ - u32 bmrank = 0; - /* Selects the SDRAM rank to be used during BIST. - * must be 0 with single rank - */ - u32 brank = 0; - - /* Specifies the maximum SDRAM bank address to be used during - * BIST before the address & increments to the next rank. - */ - u32 bmbank = (1 << nb_bank) - 1; - /* Specifies the maximum SDRAM row address to be used during - * BIST before the address & increments to the next bank. - */ - u32 bmrow = (1 << nb_row) - 1; - /* Specifies the maximum SDRAM column address to be used during - * BIST before the address & increments to the next row. - */ - u32 bmcol = (1 << nb_col) - 1; - - u32 bmode_conf = 0x00000001; /* DRam mode */ - u32 bdxen_conf = 0x00000001; /* BIST on Data byte */ - u32 bdpat_conf = 0x00000002; /* Select LFSR pattern */ - - /*Setup BIST for DRAM mode, and LFSR-random data pattern.*/ - /*Write BISTRR.BMODE = 1?b1;*/ - /*Write BISTRR.BDXEN = 1?b1;*/ - /*Write BISTRR.BDPAT = 2?b10;*/ - - /* reset BIST */ - writel(0x3, &phy->bistrr); - - writel((bmode_conf << 3) | (bdxen_conf << 14) | (bdpat_conf << 17), - &phy->bistrr); - - /*Setup BIST Word Count*/ - /*Write BISTWCR.BWCNT = 16?b0008;*/ - writel(0x00000200, &phy->bistwcr); /* A multiple of BL/2 */ - - writel(bcol | (brow << 12) | (bbank << 28), &phy->bistar0); - writel(brank | (bmrank << 2) | (bainc << 4), &phy->bistar1); - writel(bmcol | (bmrow << 12) | (bmbank << 28), &phy->bistar2); -} - -/* Select the Byte lane to be tested by BIST. */ -static void BIST_datx8_sel(struct stm32mp1_ddrphy *phy, u8 datx8) -{ - clrsetbits_le32(&phy->bistrr, - DDRPHYC_BISTRR_BDXSEL_MASK, - datx8 << DDRPHYC_BISTRR_BDXSEL_SHIFT); - - /*(For example, selecting Byte Lane 3, BISTRR.BDXSEL = 4?b0011)*/ - /* Write BISTRR.BDXSEL = datx8; */ -} - -/* Perform BIST Write_Read test on a byte lane and return test result. */ -static void BIST_test(struct stm32mp1_ddrphy *phy, u8 byte, - struct BIST_result *bist) -{ - bool result = true; /* BIST_SUCCESS */ - u32 cnt = 0; - u32 error = 0; - u32 val; - int ret; - - bist->test_result = true; - -run: - itm_soft_reset(phy); - - /*Perform BIST Reset*/ - /* Write BISTRR.BINST = 3?b011; */ - clrsetbits_le32(&phy->bistrr, - 0x00000007, - 0x00000003); - - /*Re-seed LFSR*/ - /* Write BISTLSR.SEED = 32'h1234ABCD; */ - if (BIST_seed) - writel(BIST_seed, &phy->bistlsr); - else - writel(rand(), &phy->bistlsr); - - /* some delay to reset BIST */ - udelay(10); - - /*Perform BIST Run*/ - clrsetbits_le32(&phy->bistrr, - 0x00000007, - 0x00000001); - /* Write BISTRR.BINST = 3?b001; */ - - /* poll on BISTGSR.BDONE and wait max 1000 us */ - ret = readl_poll_timeout(&phy->bistgsr, val, - val & DDRPHYC_BISTGSR_BDDONE, 1000); - - if (ret < 0) { - printf("warning: BIST timeout\n"); - result = false; /* BIST_FAIL; */ - /*Perform BIST Stop */ - clrsetbits_le32(&phy->bistrr, 0x00000007, 0x00000002); - } else { - /*Check if received correct number of words*/ - /* if (Read BISTWCSR.DXWCNT = Read BISTWCR.BWCNT) */ - if (((readl(&phy->bistwcsr)) >> DDRPHYC_BISTWCSR_DXWCNT_SHIFT) - == readl(&phy->bistwcr)) { - /*Determine if there is a data comparison error*/ - /* if (Read BISTGSR.BDXERR = 1?b0) */ - if (readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDXERR) - result = false; /* BIST_FAIL; */ - else - result = true; /* BIST_SUCCESS; */ - } else { - result = false; /* BIST_FAIL; */ - } - } - - /* loop while success */ - cnt++; - if (result && cnt != 1000) - goto run; - - if (!result) - error++; - - if (error < BIST_error_max) { - if (cnt != 1000) - goto run; - bist->test_result = true; - } else { - bist->test_result = false; - } -} - -/* After running the deskew algo, this function applies the new DQ delays - * by reading them from the array "deskew_delay"and writing in PHY registers. - * The bits that are not deskewed parfectly (too much skew on them, - * or data eye very wide) are marked in the array deskew_non_converge. - */ -static void apply_deskew_results(struct stm32mp1_ddrphy *phy, u8 byte, - u8 deskew_delay[NUM_BYTES][8], - u8 deskew_non_converge[NUM_BYTES][8]) -{ - u8 bit_i; - u8 index; - - for (bit_i = 0; bit_i < 8; bit_i++) { - set_DQ_unit_delay(phy, byte, bit_i, deskew_delay[byte][bit_i]); - index = DQ_unit_index(phy, byte, bit_i); - log_debug("Byte %d ; bit %d : The new DQ delay (%d) index=%d [delta=%d, 3 is the default]", - byte, bit_i, deskew_delay[byte][bit_i], - index, index - 3); - printf("Byte %d, bit %d, DQ delay = %d", - byte, bit_i, deskew_delay[byte][bit_i]); - if (deskew_non_converge[byte][bit_i] == 1) - log_debug(" - not converged : still more skew"); - printf("\n"); - } -} - -/* DQ Bit de-skew algorithm. - * Deskews data lines as much as possible. - * 1. Add delay to DQS line until finding the failure - * (normally a hold time violation) - * 2. Reduce DQS line by small steps until finding the very first time - * we go back to "Pass" condition. - * 3. For each DQ line, Reduce DQ delay until finding the very first failure - * (normally a hold time fail) - * 4. When all bits are at their first failure delay, we can consider them - * aligned. - * Handle conrer situation (Can't find Pass-fail, or fail-pass transitions - * at any step) - * TODO Provide a return Status. Improve doc - */ -static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, char *string) -{ - /* New DQ delay value (index), set during Deskew algo */ - u8 deskew_delay[NUM_BYTES][8]; - /*If there is still skew on a bit, mark this bit. */ - u8 deskew_non_converge[NUM_BYTES][8]; - struct BIST_result result; - s8 dqs_unit_delay_index = 0; - u8 datx8 = 0; - u8 bit_i = 0; - s8 phase_idx = 0; - s8 bit_i_delay_index = 0; - u8 success = 0; - struct tuning_position last_right_ok; - u8 force_stop = 0; - u8 fail_found; - u8 error = 0; - u8 nb_bytes = get_nb_bytes(ctl); - /* u8 last_pass_dqs_unit = 0; */ - - memset(deskew_delay, 0, sizeof(deskew_delay)); - memset(deskew_non_converge, 0, sizeof(deskew_non_converge)); - - /*Disable DQS Drift Compensation*/ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); - /*Disable all bytes*/ - /* Disable automatic power down of DLL and IOs when disabling - * a byte (To avoid having to add programming and delay - * for a DLL re-lock when later re-enabling a disabled Byte Lane) - */ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX); - - /* Disable all data bytes */ - clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); - - /* Config the BIST block */ - config_BIST(ctl, phy); - log_debug("BIST Config done.\n"); - - /* Train each byte */ - for (datx8 = 0; datx8 < nb_bytes; datx8++) { - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("\n======================\n"); - log_debug("Start deskew byte %d .\n", datx8); - log_debug("======================\n"); - /* Enable Byte (DXNGCR, bit DXEN) */ - setbits_le32(DXNGCR(phy, datx8), DDRPHYC_DXNGCR_DXEN); - - /* Select the byte lane for comparison of read data */ - BIST_datx8_sel(phy, datx8); - - /* Set all DQDLYn to maximum value. All bits within the byte - * will be delayed with DQSTR = 2 instead of max = 3 - * to avoid inter bits fail influence - */ - writel(0xAAAAAAAA, DXNDQTR(phy, datx8)); - - /* Set the DQS phase delay to 90 DEG (default). - * What is defined here is the index of the desired config - * in the PHASE array. - */ - phase_idx = _90deg; - - /* Set DQS unit delay to the max value. */ - dqs_unit_delay_index = MAX_DQS_UNIT_IDX; - DQS_unit_delay(phy, datx8, dqs_unit_delay_index); - DQS_phase_delay(phy, datx8, phase_idx); - - /* Issue a DLL soft reset */ - clrbits_le32(DXNDLLCR(phy, datx8), DDRPHYC_DXNDLLCR_DLLSRST); - setbits_le32(DXNDLLCR(phy, datx8), DDRPHYC_DXNDLLCR_DLLSRST); - - /* Test this typical init condition */ - BIST_test(phy, datx8, &result); - success = result.test_result; - - /* If the test pass in this typical condition, - * start the algo with it. - * Else, look for Pass init condition - */ - if (!success) { - log_debug("Fail at init condtion. Let's look for a good init condition.\n"); - success = 0; /* init */ - /* Make sure we start with a PASS condition before - * looking for a fail condition. - * Find the first PASS PHASE condition - */ - - /* escape if we find a PASS */ - log_debug("increase Phase idx\n"); - while (!success && (phase_idx <= MAX_DQS_PHASE_IDX)) { - DQS_phase_delay(phy, datx8, phase_idx); - BIST_test(phy, datx8, &result); - success = result.test_result; - phase_idx++; - } - /* if ended with success - * ==>> Restore the fist success condition - */ - if (success) - phase_idx--; /* because it ended with ++ */ - } - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return TEST_FAILED; - } - /* We couldn't find a successful condition, its seems - * we have hold violation, lets try reduce DQS_unit Delay - */ - if (!success) { - /* We couldn't find a successful condition, its seems - * we have hold violation, lets try reduce DQS_unit - * Delay - */ - log_debug("Still fail. Try decrease DQS Unit delay\n"); - - phase_idx = 0; - dqs_unit_delay_index = 0; - DQS_phase_delay(phy, datx8, phase_idx); - - /* escape if we find a PASS */ - while (!success && - (dqs_unit_delay_index <= - MAX_DQS_UNIT_IDX)) { - DQS_unit_delay(phy, datx8, - dqs_unit_delay_index); - BIST_test(phy, datx8, &result); - success = result.test_result; - dqs_unit_delay_index++; - } - if (success) { - /* Restore the first success condition*/ - dqs_unit_delay_index--; - /* last_pass_dqs_unit = dqs_unit_delay_index;*/ - DQS_unit_delay(phy, datx8, - dqs_unit_delay_index); - } else { - /* No need to continue, - * there is no pass region. - */ - force_stop = 1; - } - } - - /* There is an initial PASS condition - * Look for the first failing condition by PHASE stepping. - * This part of the algo can finish without converging. - */ - if (force_stop) { - printf("Result: Failed "); - printf("[Cannot Deskew lines, "); - printf("there is no PASS region]\n"); - error++; - continue; - } - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return TEST_FAILED; - } - - log_debug("there is a pass region for phase idx %d\n", - phase_idx); - log_debug("Step1: Find the first failing condition\n"); - /* Look for the first failing condition by PHASE stepping. - * This part of the algo can finish without converging. - */ - - /* escape if we find a fail (hold time violation) - * condition at any bit or if out of delay range. - */ - while (success && (phase_idx <= MAX_DQS_PHASE_IDX)) { - DQS_phase_delay(phy, datx8, phase_idx); - BIST_test(phy, datx8, &result); - success = result.test_result; - phase_idx++; - } - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return TEST_FAILED; - } - - /* if the loop ended with a failing condition at any bit, - * lets look for the first previous success condition by unit - * stepping (minimal delay) - */ - if (!success) { - log_debug("Fail region (PHASE) found phase idx %d\n", - phase_idx); - log_debug("Let's look for first success by DQS Unit steps\n"); - /* This part, the algo always converge */ - phase_idx--; - - /* escape if we find a success condition - * or if out of delay range. - */ - while (!success && dqs_unit_delay_index >= 0) { - DQS_unit_delay(phy, datx8, - dqs_unit_delay_index); - BIST_test(phy, datx8, &result); - success = result.test_result; - dqs_unit_delay_index--; - } - /* if the loop ended with a success condition, - * the last delay Right OK (before hold violation) - * condition is then defined as following: - */ - if (success) { - /* Hold the dely parameters of the the last - * delay Right OK condition. - * -1 to get back to current condition - */ - last_right_ok.phase = phase_idx; - /*+1 to get back to current condition */ - last_right_ok.unit = dqs_unit_delay_index + 1; - last_right_ok.bits_delay = 0xFFFFFFFF; - log_debug("Found %d\n", dqs_unit_delay_index); - } else { - /* the last OK condition is then with the - * previous phase_idx. - * -2 instead of -1 because at the last - * iteration of the while(), - * we incremented phase_idx - */ - last_right_ok.phase = phase_idx - 1; - /* Nominal+1. Because we want the previous - * delay after reducing the phase delay. - */ - last_right_ok.unit = 1; - last_right_ok.bits_delay = 0xFFFFFFFF; - log_debug("Not Found : try previous phase %d\n", - phase_idx - 1); - - DQS_phase_delay(phy, datx8, phase_idx - 1); - dqs_unit_delay_index = 0; - success = true; - while (success && - (dqs_unit_delay_index < - MAX_DQS_UNIT_IDX)) { - DQS_unit_delay(phy, datx8, - dqs_unit_delay_index); - BIST_test(phy, datx8, &result); - success = result.test_result; - dqs_unit_delay_index++; - log_debug("dqs_unit_delay_index = %d, result = %d\n", - dqs_unit_delay_index, success); - } - - if (!success) { - last_right_ok.unit = - dqs_unit_delay_index - 1; - } else { - last_right_ok.unit = 0; - log_debug("ERROR: failed region not FOUND"); - } - } - } else { - /* we can't find a failing condition at all bits - * ==> Just hold the last test condition - * (the max DQS delay) - * which is the most likely, - * the closest to a hold violation - * If we can't find a Fail condition after - * the Pass region, stick at this position - * In order to have max chances to find a fail - * when reducing DQ delays. - */ - last_right_ok.phase = MAX_DQS_PHASE_IDX; - last_right_ok.unit = MAX_DQS_UNIT_IDX; - last_right_ok.bits_delay = 0xFFFFFFFF; - log_debug("Can't find the a fail condition\n"); - } - - /* step 2: - * if we arrive at this stage, it means that we found the last - * Right OK condition (by tweeking the DQS delay). Or we simply - * pushed DQS delay to the max - * This means that by reducing the delay on some DQ bits, - * we should find a failing condition. - */ - printf("Byte %d, DQS unit = %d, phase = %d\n", - datx8, last_right_ok.unit, last_right_ok.phase); - log_debug("Step2, unit = %d, phase = %d, bits delay=%x\n", - last_right_ok.unit, last_right_ok.phase, - last_right_ok.bits_delay); - - /* Restore the last_right_ok condtion. */ - DQS_unit_delay(phy, datx8, last_right_ok.unit); - DQS_phase_delay(phy, datx8, last_right_ok.phase); - writel(last_right_ok.bits_delay, DXNDQTR(phy, datx8)); - - /* train each bit - * reduce delay on each bit, and perform a write/read test - * and stop at the very first time it fails. - * the goal is the find the first failing condition - * for each bit. - * When we achieve this condition< for all the bits, - * we are sure they are aligned (+/- step resolution) - */ - fail_found = 0; - for (bit_i = 0; bit_i < 8; bit_i++) { - if (ctrlc()) { - sprintf(string, - "interrupted at byte %d/%d, error=%d", - datx8 + 1, nb_bytes, error); - return error; - } - log_debug("deskewing bit %d:\n", bit_i); - success = 1; /* init */ - /* Set all DQDLYn to maximum value. - * Only bit_i will be down-delayed - * ==> if we have a fail, it will be definitely - * from bit_i - */ - writel(0xFFFFFFFF, DXNDQTR(phy, datx8)); - /* Arriving at this stage, - * we have a success condition with delay = 3; - */ - bit_i_delay_index = 3; - - /* escape if bit delay is out of range or - * if a fatil occurs - */ - while ((bit_i_delay_index >= 0) && success) { - set_DQ_unit_delay(phy, datx8, - bit_i, - bit_i_delay_index); - BIST_test(phy, datx8, &result); - success = result.test_result; - bit_i_delay_index--; - } - - /* if escape with a fail condition - * ==> save this position for bit_i - */ - if (!success) { - /* save the delay position. - * Add 1 because the while loop ended with a --, - * and that we need to hold the last success - * delay - */ - deskew_delay[datx8][bit_i] = - bit_i_delay_index + 2; - if (deskew_delay[datx8][bit_i] > 3) - deskew_delay[datx8][bit_i] = 3; - - /* A flag that states we found at least a fail - * at one bit. - */ - fail_found = 1; - log_debug("Fail found on bit %d, for delay = %d => deskew[%d][%d] = %d\n", - bit_i, bit_i_delay_index + 1, - datx8, bit_i, - deskew_delay[datx8][bit_i]); - } else { - /* if we can find a success condition by - * back-delaying this bit, just set the delay - * to 0 (the best deskew - * possible) and mark the bit. - */ - deskew_delay[datx8][bit_i] = 0; - /* set a flag that will be used later - * in the report. - */ - deskew_non_converge[datx8][bit_i] = 1; - log_debug("Fail not found on bit %d => deskew[%d][%d] = %d\n", - bit_i, datx8, bit_i, - deskew_delay[datx8][bit_i]); - } - } - log_debug("**********byte %d tuning complete************\n", - datx8); - /* If we can't find any failure by back delaying DQ lines, - * hold the default values - */ - if (!fail_found) { - for (bit_i = 0; bit_i < 8; bit_i++) - deskew_delay[datx8][bit_i] = 0; - log_debug("The Deskew algorithm can't converge, there is too much margin in your design. Good job!\n"); - } - - apply_deskew_results(phy, datx8, deskew_delay, - deskew_non_converge); - /* Restore nominal value for DQS delay */ - DQS_phase_delay(phy, datx8, 3); - DQS_unit_delay(phy, datx8, 3); - /* disable byte after byte bits deskew */ - clrbits_le32(DXNGCR(phy, datx8), DDRPHYC_DXNGCR_DXEN); - } /* end of byte deskew */ - - /* re-enable all data bytes */ - setbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN); - setbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN); - setbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN); - setbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); - - if (error) { - sprintf(string, "error = %d", error); - return TEST_FAILED; - } - - return TEST_PASSED; -} /* end function */ - -/* Trim DQS timings and set it in the centre of data eye. - * Look for a PPPPF region, then look for a FPPP region and finally select - * the mid of the FPPPPPF region - */ -static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, char *string) -{ - /*Stores the DQS trim values (PHASE index, unit index) */ - u8 eye_training_val[NUM_BYTES][2]; - u8 byte = 0; - struct BIST_result result; - s8 dqs_unit_delay_index = 0; - s8 phase_idx = 0; - s8 dqs_unit_delay_index_pass = 0; - s8 phase_idx_pass = 0; - u8 success = 0; - u8 left_phase_bound_found, right_phase_bound_found; - u8 left_unit_bound_found, right_unit_bound_found; - u8 left_bound_found, right_bound_found; - struct tuning_position left_bound, right_bound; - u8 error = 0; - u8 nb_bytes = get_nb_bytes(ctl); - - /*Disable DQS Drift Compensation*/ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); - /*Disable all bytes*/ - /* Disable automatic power down of DLL and IOs when disabling a byte - * (To avoid having to add programming and delay - * for a DLL re-lock when later re-enabling a disabled Byte Lane) - */ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX); - - /*Disable all data bytes */ - clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); - - /* Config the BIST block */ - config_BIST(ctl, phy); - - for (byte = 0; byte < nb_bytes; byte++) { - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - right_bound.phase = 0; - right_bound.unit = 0; - - left_bound.phase = 0; - left_bound.unit = 0; - - left_phase_bound_found = 0; - right_phase_bound_found = 0; - - left_unit_bound_found = 0; - right_unit_bound_found = 0; - - left_bound_found = 0; - right_bound_found = 0; - - /* Enable Byte (DXNGCR, bit DXEN) */ - setbits_le32(DXNGCR(phy, byte), DDRPHYC_DXNGCR_DXEN); - - /* Select the byte lane for comparison of read data */ - BIST_datx8_sel(phy, byte); - - /* Set DQS phase delay to the nominal value. */ - phase_idx = _90deg; - phase_idx_pass = phase_idx; - - /* Set DQS unit delay to the nominal value. */ - dqs_unit_delay_index = 3; - dqs_unit_delay_index_pass = dqs_unit_delay_index; - success = 0; - - log_debug("STEP0: Find Init delay\n"); - /* STEP0: Find Init delay: a delay that put the system - * in a "Pass" condition then (TODO) update - * dqs_unit_delay_index_pass & phase_idx_pass - */ - DQS_unit_delay(phy, byte, dqs_unit_delay_index); - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - /* If we have a fail in the nominal condition */ - if (!success) { - /* Look at the left */ - while (phase_idx >= 0 && !success) { - phase_idx--; - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - } - } - if (!success) { - /* if we can't find pass condition, - * then look at the right - */ - phase_idx = _90deg; - while (phase_idx <= MAX_DQS_PHASE_IDX && - !success) { - phase_idx++; - DQS_phase_delay(phy, byte, - phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - } - } - /* save the pass condition */ - if (success) { - phase_idx_pass = phase_idx; - } else { - printf("Result: Failed "); - printf("[Cannot DQS timings, "); - printf("there is no PASS region]\n"); - error++; - continue; - } - - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("STEP1: Find LEFT PHASE DQS Bound\n"); - /* STEP1: Find LEFT PHASE DQS Bound */ - while ((phase_idx >= 0) && - (phase_idx <= MAX_DQS_PHASE_IDX) && - !left_phase_bound_found) { - DQS_unit_delay(phy, byte, - dqs_unit_delay_index); - DQS_phase_delay(phy, byte, - phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - - /*TODO: Manage the case were at the beginning - * there is already a fail - */ - if (!success) { - /* the last pass condition */ - left_bound.phase = ++phase_idx; - left_phase_bound_found = 1; - } else if (success) { - phase_idx--; - } - } - if (!left_phase_bound_found) { - left_bound.phase = 0; - phase_idx = 0; - } - /* If not found, lets take 0 */ - - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("STEP2: Find UNIT left bound\n"); - /* STEP2: Find UNIT left bound */ - while ((dqs_unit_delay_index >= 0) && - !left_unit_bound_found) { - DQS_unit_delay(phy, byte, - dqs_unit_delay_index); - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - if (!success) { - left_bound.unit = - ++dqs_unit_delay_index; - left_unit_bound_found = 1; - left_bound_found = 1; - } else if (success) { - dqs_unit_delay_index--; - } - } - - /* If not found, lets take 0 */ - if (!left_unit_bound_found) - left_bound.unit = 0; - - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("STEP3: Find PHase right bound\n"); - /* STEP3: Find PHase right bound, start with "pass" - * condition - */ - - /* Set DQS phase delay to the pass value. */ - phase_idx = phase_idx_pass; - - /* Set DQS unit delay to the pass value. */ - dqs_unit_delay_index = dqs_unit_delay_index_pass; - - while ((phase_idx <= MAX_DQS_PHASE_IDX) && - !right_phase_bound_found) { - DQS_unit_delay(phy, byte, - dqs_unit_delay_index); - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - if (!success) { - /* the last pass condition */ - right_bound.phase = --phase_idx; - right_phase_bound_found = 1; - } else if (success) { - phase_idx++; - } - } - - /* If not found, lets take the max value */ - if (!right_phase_bound_found) { - right_bound.phase = MAX_DQS_PHASE_IDX; - phase_idx = MAX_DQS_PHASE_IDX; - } - - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d, error=%d", - byte + 1, nb_bytes, error); - return TEST_FAILED; - } - log_debug("STEP4: Find UNIT right bound\n"); - /* STEP4: Find UNIT right bound */ - while ((dqs_unit_delay_index <= MAX_DQS_UNIT_IDX) && - !right_unit_bound_found) { - DQS_unit_delay(phy, byte, - dqs_unit_delay_index); - DQS_phase_delay(phy, byte, phase_idx); - BIST_test(phy, byte, &result); - success = result.test_result; - if (!success) { - right_bound.unit = - --dqs_unit_delay_index; - right_unit_bound_found = 1; - right_bound_found = 1; - } else if (success) { - dqs_unit_delay_index++; - } - } - /* If not found, lets take the max value */ - if (!right_unit_bound_found) - right_bound.unit = MAX_DQS_UNIT_IDX; - - /* If we found a regular FAil Pass FAil pattern - * FFPPPPPPFF - * OR PPPPPFF Or FFPPPPP - */ - - if (left_bound_found || right_bound_found) { - eye_training_val[byte][0] = (right_bound.phase + - left_bound.phase) / 2; - eye_training_val[byte][1] = (right_bound.unit + - left_bound.unit) / 2; - - /* If we already lost 1/2PHASE Tuning, - * let's try to recover by ++ on unit - */ - if (((right_bound.phase + left_bound.phase) % 2 == 1) && - eye_training_val[byte][1] != MAX_DQS_UNIT_IDX) - eye_training_val[byte][1]++; - log_debug("** found phase : %d - %d & unit %d - %d\n", - right_bound.phase, left_bound.phase, - right_bound.unit, left_bound.unit); - log_debug("** calculating mid region: phase: %d unit: %d (nominal is 3)\n", - eye_training_val[byte][0], - eye_training_val[byte][1]); - } else { - /* PPPPPPPPPP, we're already good. - * Set nominal values. - */ - eye_training_val[byte][0] = 3; - eye_training_val[byte][1] = 3; - } - DQS_phase_delay(phy, byte, eye_training_val[byte][0]); - DQS_unit_delay(phy, byte, eye_training_val[byte][1]); - - printf("Byte %d, DQS unit = %d, phase = %d\n", - byte, - eye_training_val[byte][1], - eye_training_val[byte][0]); - } - - if (error) { - sprintf(string, "error = %d", error); - return TEST_FAILED; - } - - return TEST_PASSED; -} - -static void display_reg_results(struct stm32mp1_ddrphy *phy, u8 byte) -{ - u8 i = 0; - - printf("Byte %d Dekew result, bit0 delay, bit1 delay...bit8 delay\n ", - byte); - - for (i = 0; i < 8; i++) - printf("%d ", DQ_unit_index(phy, byte, i)); - printf("\n"); - - printf("dxndllcr: [%08x] val:%08x\n", - DXNDLLCR(phy, byte), - readl(DXNDLLCR(phy, byte))); - printf("dxnqdstr: [%08x] val:%08x\n", - DXNDQSTR(phy, byte), - readl(DXNDQSTR(phy, byte))); - printf("dxndqtr: [%08x] val:%08x\n", - DXNDQTR(phy, byte), - readl(DXNDQTR(phy, byte))); -} - -/* analyse the dgs gating log table, and determine the midpoint.*/ -static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte, - u8 dqs_gating[NUM_BYTES] - [MAX_GSL_IDX + 1] - [MAX_GPS_IDX + 1]) -{ - /* stores the dqs gate values (gsl index, gps index) */ - u8 dqs_gate_values[NUM_BYTES][2]; - u8 gsl_idx, gps_idx = 0; - u8 left_bound_idx[2] = {0, 0}; - u8 right_bound_idx[2] = {0, 0}; - u8 left_bound_found = 0; - u8 right_bound_found = 0; - u8 intermittent = 0; - u8 value; - - for (gsl_idx = 0; gsl_idx <= MAX_GSL_IDX; gsl_idx++) { - for (gps_idx = 0; gps_idx <= MAX_GPS_IDX; gps_idx++) { - value = dqs_gating[byte][gsl_idx][gps_idx]; - if (value == 1 && left_bound_found == 0) { - left_bound_idx[0] = gsl_idx; - left_bound_idx[1] = gps_idx; - left_bound_found = 1; - } else if (value == 0 && - left_bound_found == 1 && - !right_bound_found) { - if (gps_idx == 0) { - right_bound_idx[0] = gsl_idx - 1; - right_bound_idx[1] = MAX_GPS_IDX; - } else { - right_bound_idx[0] = gsl_idx; - right_bound_idx[1] = gps_idx - 1; - } - right_bound_found = 1; - } else if (value == 1 && - right_bound_found == 1) { - intermittent = 1; - } - } - } - - /* if only ppppppp is found, there is no mid region. */ - if (left_bound_idx[0] == 0 && left_bound_idx[1] == 0 && - right_bound_idx[0] == 0 && right_bound_idx[1] == 0) - intermittent = 1; - - /*if we found a regular fail pass fail pattern ffppppppff - * or pppppff or ffppppp - */ - if (!intermittent) { - /*if we found a regular fail pass fail pattern ffppppppff - * or pppppff or ffppppp - */ - if (left_bound_found || right_bound_found) { - log_debug("idx0(%d): %d %d idx1(%d) : %d %d\n", - left_bound_found, - right_bound_idx[0], left_bound_idx[0], - right_bound_found, - right_bound_idx[1], left_bound_idx[1]); - dqs_gate_values[byte][0] = - (right_bound_idx[0] + left_bound_idx[0]) / 2; - dqs_gate_values[byte][1] = - (right_bound_idx[1] + left_bound_idx[1]) / 2; - /* if we already lost 1/2gsl tuning, - * let's try to recover by ++ on gps - */ - if (((right_bound_idx[0] + - left_bound_idx[0]) % 2 == 1) && - dqs_gate_values[byte][1] != MAX_GPS_IDX) - dqs_gate_values[byte][1]++; - /* if we already lost 1/2gsl tuning and gps is on max*/ - else if (((right_bound_idx[0] + - left_bound_idx[0]) % 2 == 1) && - dqs_gate_values[byte][1] == MAX_GPS_IDX) { - dqs_gate_values[byte][1] = 0; - dqs_gate_values[byte][0]++; - } - /* if we have gsl left and write limit too close - * (difference=1) - */ - if (((right_bound_idx[0] - left_bound_idx[0]) == 1)) { - dqs_gate_values[byte][1] = (left_bound_idx[1] + - right_bound_idx[1] + - 4) / 2; - if (dqs_gate_values[byte][1] >= 4) { - dqs_gate_values[byte][0] = - right_bound_idx[0]; - dqs_gate_values[byte][1] -= 4; - } else { - dqs_gate_values[byte][0] = - left_bound_idx[0]; - } - } - log_debug("*******calculating mid region: system latency: %d phase: %d********\n", - dqs_gate_values[byte][0], - dqs_gate_values[byte][1]); - log_debug("*******the nominal values were system latency: 0 phase: 2*******\n"); - } - } else { - /* if intermitant, restore defaut values */ - log_debug("dqs gating:no regular fail/pass/fail found. defaults values restored.\n"); - dqs_gate_values[byte][0] = 0; - dqs_gate_values[byte][1] = 2; - } - set_r0dgsl_delay(phy, byte, dqs_gate_values[byte][0]); - set_r0dgps_delay(phy, byte, dqs_gate_values[byte][1]); - printf("Byte %d, R0DGSL = %d, R0DGPS = %d\n", - byte, dqs_gate_values[byte][0], dqs_gate_values[byte][1]); - - /* return 0 if intermittent or if both left_bound - * and right_bound are not found - */ - return !(intermittent || (left_bound_found && right_bound_found)); -} - -static enum test_result read_dqs_gating(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string) -{ - /* stores the log of pass/fail */ - u8 dqs_gating[NUM_BYTES][MAX_GSL_IDX + 1][MAX_GPS_IDX + 1]; - u8 byte, gsl_idx, gps_idx = 0; - struct BIST_result result; - u8 success = 0; - u8 nb_bytes = get_nb_bytes(ctl); - - memset(dqs_gating, 0x0, sizeof(dqs_gating)); - - /*disable dqs drift compensation*/ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); - /*disable all bytes*/ - /* disable automatic power down of dll and ios when disabling a byte - * (to avoid having to add programming and delay - * for a dll re-lock when later re-enabling a disabled byte lane) - */ - clrbits_le32(&phy->pgcr, DDRPHYC_PGCR_PDDISDX); - - /* disable all data bytes */ - clrbits_le32(&phy->dx0gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx1gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx2gcr, DDRPHYC_DXNGCR_DXEN); - clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); - - /* config the bist block */ - config_BIST(ctl, phy); - - for (byte = 0; byte < nb_bytes; byte++) { - if (ctrlc()) { - sprintf(string, "interrupted at byte %d/%d", - byte + 1, nb_bytes); - return TEST_FAILED; - } - /* enable byte x (dxngcr, bit dxen) */ - setbits_le32(DXNGCR(phy, byte), DDRPHYC_DXNGCR_DXEN); - - /* select the byte lane for comparison of read data */ - BIST_datx8_sel(phy, byte); - for (gsl_idx = 0; gsl_idx <= MAX_GSL_IDX; gsl_idx++) { - for (gps_idx = 0; gps_idx <= MAX_GPS_IDX; gps_idx++) { - if (ctrlc()) { - sprintf(string, - "interrupted at byte %d/%d", - byte + 1, nb_bytes); - return TEST_FAILED; - } - /* write cfg to dxndqstr */ - set_r0dgsl_delay(phy, byte, gsl_idx); - set_r0dgps_delay(phy, byte, gps_idx); - - BIST_test(phy, byte, &result); - success = result.test_result; - if (success) - dqs_gating[byte][gsl_idx][gps_idx] = 1; - itm_soft_reset(phy); - } - } - set_midpoint_read_dqs_gating(phy, byte, dqs_gating); - /* dummy reads */ - readl(0xc0000000); - readl(0xc0000000); - } - - /* re-enable drift compensation */ - /* setbits_le32(&phy->pgcr, DDRPHYC_PGCR_DFTCMP); */ - return TEST_PASSED; -} - -/**************************************************************** - * TEST - **************************************************************** - */ -static enum test_result do_read_dqs_gating(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, - char *argv[]) -{ - u32 rfshctl3 = readl(&ctl->rfshctl3); - u32 pwrctl = readl(&ctl->pwrctl); - u32 derateen = readl(&ctl->derateen); - enum test_result res; - - writel(0x0, &ctl->derateen); - stm32mp1_refresh_disable(ctl); - - res = read_dqs_gating(ctl, phy, string); - - stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); - writel(derateen, &ctl->derateen); - - return res; -} - -static enum test_result do_bit_deskew(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, char *argv[]) -{ - u32 rfshctl3 = readl(&ctl->rfshctl3); - u32 pwrctl = readl(&ctl->pwrctl); - u32 derateen = readl(&ctl->derateen); - enum test_result res; - - writel(0x0, &ctl->derateen); - stm32mp1_refresh_disable(ctl); - - res = bit_deskew(ctl, phy, string); - - stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); - writel(derateen, &ctl->derateen); - - return res; -} - -static enum test_result do_eye_training(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, char *argv[]) -{ - u32 rfshctl3 = readl(&ctl->rfshctl3); - u32 pwrctl = readl(&ctl->pwrctl); - u32 derateen = readl(&ctl->derateen); - enum test_result res; - - writel(0x0, &ctl->derateen); - stm32mp1_refresh_disable(ctl); - - res = eye_training(ctl, phy, string); - - stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); - writel(derateen, &ctl->derateen); - - return res; -} - -static enum test_result do_display(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, char *argv[]) -{ - int byte; - u8 nb_bytes = get_nb_bytes(ctl); - - for (byte = 0; byte < nb_bytes; byte++) - display_reg_results(phy, byte); - - return TEST_PASSED; -} - -static enum test_result do_bist_config(struct stm32mp1_ddrctl *ctl, - struct stm32mp1_ddrphy *phy, - char *string, int argc, char *argv[]) -{ - unsigned long value; - - if (argc > 0) { - if (strict_strtoul(argv[0], 0, &value) < 0) { - sprintf(string, "invalid nbErr %s", argv[0]); - return TEST_FAILED; - } - BIST_error_max = value; - } - if (argc > 1) { - if (strict_strtoul(argv[1], 0, &value) < 0) { - sprintf(string, "invalid Seed %s", argv[1]); - return TEST_FAILED; - } - BIST_seed = value; - } - printf("Bist.nbErr = %d\n", BIST_error_max); - if (BIST_seed) - printf("Bist.Seed = 0x%x\n", BIST_seed); - else - printf("Bist.Seed = random\n"); - - return TEST_PASSED; -} - -/**************************************************************** - * TEST Description - **************************************************************** - */ - -const struct test_desc tuning[] = { - {do_read_dqs_gating, "Read DQS gating", - "software read DQS Gating", "", 0 }, - {do_bit_deskew, "Bit de-skew", "", "", 0 }, - {do_eye_training, "Eye Training", "or DQS training", "", 0 }, - {do_display, "Display registers", "", "", 0 }, - {do_bist_config, "Bist config", "[nbErr] [seed]", - "configure Bist test", 2}, -}; - -const int tuning_nb = ARRAY_SIZE(tuning); diff --git a/drivers/reset/reset-scmi.c b/drivers/reset/reset-scmi.c index 1bff807..ca0135a 100644 --- a/drivers/reset/reset-scmi.c +++ b/drivers/reset/reset-scmi.c @@ -2,6 +2,9 @@ /* * Copyright (C) 2019-2020 Linaro Limited */ + +#define LOG_CATEGORY UCLASS_RESET + #include <common.h> #include <dm.h> #include <errno.h> diff --git a/drivers/serial/arm_dcc.c b/drivers/serial/arm_dcc.c index dfcb6fd..a402a12 100644 --- a/drivers/serial/arm_dcc.c +++ b/drivers/serial/arm_dcc.c @@ -51,7 +51,7 @@ #define status_dcc(x) \ __asm__ volatile ("mrc p14, 0, %0, c14, c0, 0\n" : "=r" (x)) -#elif defined(CONFIG_CPU_ARMV8) +#elif defined(CONFIG_ARM64) /* * ARMV8 */ diff --git a/drivers/serial/serial_efi.c b/drivers/serial/serial_efi.c index 33ddbd6..0067576 100644 --- a/drivers/serial/serial_efi.c +++ b/drivers/serial/serial_efi.c @@ -24,6 +24,9 @@ struct serial_efi_priv { bool have_key; }; +/* Convert a lower-case character to its ctrl-char equivalent */ +#define CTL_CH(c) ((c) - 'a' + 1) + int serial_efi_setbrg(struct udevice *dev, int baudrate) { return 0; @@ -49,6 +52,7 @@ static int serial_efi_get_key(struct serial_efi_priv *priv) static int serial_efi_getc(struct udevice *dev) { struct serial_efi_priv *priv = dev_get_priv(dev); + char conv_scan[10] = {0, 'p', 'n', 'f', 'b', 'a', 'e', 0, 8}; int ret, ch; ret = serial_efi_get_key(priv); @@ -63,8 +67,11 @@ static int serial_efi_getc(struct udevice *dev) * key scan code of 8. Handle this so that backspace works correctly * in the U-Boot command line. */ - if (!ch && priv->key.scan_code == 8) - ch = 8; + if (!ch && priv->key.scan_code < sizeof(conv_scan)) { + ch = conv_scan[priv->key.scan_code]; + if (ch >= 'a') + ch -= 'a' - 1; + } debug(" [%x %x %x] ", ch, priv->key.unicode_char, priv->key.scan_code); return ch; diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c index 3c9a695..ca49ef7 100644 --- a/drivers/serial/serial_lpuart.c +++ b/drivers/serial/serial_lpuart.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <clk.h> #include <dm.h> #include <fsl_lpuart.h> @@ -102,13 +103,9 @@ static void lpuart_write32(u32 flags, u32 *addr, u32 val) } -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 0 -#endif - u32 __weak get_lpuart_clk(void) { - return CONFIG_SYS_CLK_FREQ; + return get_board_sys_clk(); } #if CONFIG_IS_ENABLED(CLK) diff --git a/drivers/serial/serial_mvebu_a3700.c b/drivers/serial/serial_mvebu_a3700.c index 93e4d38..3e673bd 100644 --- a/drivers/serial/serial_mvebu_a3700.c +++ b/drivers/serial/serial_mvebu_a3700.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * Copyright (C) 2021 Pali Rohár <pali@kernel.org> */ #include <common.h> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index b1a3aa9..0982983 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -17,6 +17,7 @@ #include <errno.h> #include <fdtdec.h> #include <dm/device_compat.h> +#include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/err.h> #include <linux/io.h> @@ -32,6 +33,7 @@ #define QSPI_RD 0x0008 /* Receive Data Register */ #define QSPI_TD 0x000c /* Transmit Data Register */ #define QSPI_SR 0x0010 /* Status Register */ +#define QSPI_SR2 0x0024 /* SAMA7G5 Status Register */ #define QSPI_IER 0x0014 /* Interrupt Enable Register */ #define QSPI_IDR 0x0018 /* Interrupt Disable Register */ #define QSPI_IMR 0x001c /* Interrupt Mask Register */ @@ -46,6 +48,13 @@ #define QSPI_SMR 0x0040 /* Scrambling Mode Register */ #define QSPI_SKR 0x0044 /* Scrambling Key Register */ +#define QSPI_REFRESH 0x0050 /* Refresh Register */ +#define QSPI_WRACNT 0x0054 /* Write Access Counter Register */ +#define QSPI_DLLCFG 0x0058 /* DLL Configuration Register */ +#define QSPI_PCALCFG 0x005C /* Pad Calibration Configuration Register */ +#define QSPI_PCALBP 0x0060 /* Pad Calibration Bypass Register */ +#define QSPI_TOUT 0x0064 /* Timeout Register */ + #define QSPI_WPMR 0x00E4 /* Write Protection Mode Register */ #define QSPI_WPSR 0x00E8 /* Write Protection Status Register */ @@ -54,7 +63,14 @@ /* Bitfields in QSPI_CR (Control Register) */ #define QSPI_CR_QSPIEN BIT(0) #define QSPI_CR_QSPIDIS BIT(1) +#define QSPI_CR_DLLON BIT(2) +#define QSPI_CR_DLLOFF BIT(3) +#define QSPI_CR_STPCAL BIT(4) +#define QSPI_CR_SRFRSH BIT(5) #define QSPI_CR_SWRST BIT(7) +#define QSPI_CR_UPDCFG BIT(8) +#define QSPI_CR_STTFR BIT(9) +#define QSPI_CR_RTOUT BIT(10) #define QSPI_CR_LASTXFER BIT(24) /* Bitfields in QSPI_MR (Mode Register) */ @@ -62,12 +78,15 @@ #define QSPI_MR_LLB BIT(1) #define QSPI_MR_WDRBT BIT(2) #define QSPI_MR_SMRM BIT(3) +#define QSPI_MR_DQSDLYEN BIT(3) + #define QSPI_MR_CSMODE_MASK GENMASK(5, 4) #define QSPI_MR_CSMODE_NOT_RELOADED (0 << 4) #define QSPI_MR_CSMODE_LASTXFER (1 << 4) #define QSPI_MR_CSMODE_SYSTEMATICALLY (2 << 4) #define QSPI_MR_NBBITS_MASK GENMASK(11, 8) #define QSPI_MR_NBBITS(n) ((((n) - 8) << 8) & QSPI_MR_NBBITS_MASK) +#define QSPI_MR_OENSD BIT(15) #define QSPI_MR_DLYBCT_MASK GENMASK(23, 16) #define QSPI_MR_DLYBCT(n) (((n) << 16) & QSPI_MR_DLYBCT_MASK) #define QSPI_MR_DLYCS_MASK GENMASK(31, 24) @@ -81,6 +100,13 @@ #define QSPI_SR_CSR BIT(8) #define QSPI_SR_CSS BIT(9) #define QSPI_SR_INSTRE BIT(10) +#define QSPI_SR_LWRA BIT(11) +#define QSPI_SR_QITF BIT(12) +#define QSPI_SR_QITR BIT(13) +#define QSPI_SR_CSFA BIT(14) +#define QSPI_SR_CSRA BIT(15) +#define QSPI_SR_RFRSHD BIT(16) +#define QSPI_SR_TOUT BIT(17) #define QSPI_SR_QSPIENS BIT(24) #define QSPI_SR_CMD_COMPLETED (QSPI_SR_INSTRE | QSPI_SR_CSR) @@ -93,9 +119,22 @@ #define QSPI_SCR_DLYBS_MASK GENMASK(23, 16) #define QSPI_SCR_DLYBS(n) (((n) << 16) & QSPI_SCR_DLYBS_MASK) +/* Bitfields in QSPI_SR2 (SAMA7G5 Status Register) */ +#define QSPI_SR2_SYNCBSY BIT(0) +#define QSPI_SR2_QSPIENS BIT(1) +#define QSPI_SR2_CSS BIT(2) +#define QSPI_SR2_RBUSY BIT(3) +#define QSPI_SR2_HIDLE BIT(4) +#define QSPI_SR2_DLOCK BIT(5) +#define QSPI_SR2_CALBSY BIT(6) + +/* Bitfields in QSPI_IAR (Instruction Address Register) */ +#define QSPI_IAR_ADDR GENMASK(31, 0) + /* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */ #define QSPI_ICR_INST_MASK GENMASK(7, 0) #define QSPI_ICR_INST(inst) (((inst) << 0) & QSPI_ICR_INST_MASK) +#define QSPI_ICR_INST_MASK_SAMA7G5 GENMASK(15, 0) #define QSPI_ICR_OPT_MASK GENMASK(23, 16) #define QSPI_ICR_OPT(opt) (((opt) << 16) & QSPI_ICR_OPT_MASK) @@ -108,6 +147,9 @@ #define QSPI_IFR_WIDTH_QUAD_IO (4 << 0) #define QSPI_IFR_WIDTH_DUAL_CMD (5 << 0) #define QSPI_IFR_WIDTH_QUAD_CMD (6 << 0) +#define QSPI_IFR_WIDTH_OCT_OUTPUT (7 << 0) +#define QSPI_IFR_WIDTH_OCT_IO (8 << 0) +#define QSPI_IFR_WIDTH_OCT_CMD (9 << 0) #define QSPI_IFR_INSTEN BIT(4) #define QSPI_IFR_ADDREN BIT(5) #define QSPI_IFR_OPTEN BIT(6) @@ -118,19 +160,60 @@ #define QSPI_IFR_OPTL_4BIT (2 << 8) #define QSPI_IFR_OPTL_8BIT (3 << 8) #define QSPI_IFR_ADDRL BIT(10) +#define QSPI_IFR_ADDRL_SAMA7G5 GENMASK(11, 10) #define QSPI_IFR_TFRTYP_MEM BIT(12) #define QSPI_IFR_SAMA5D2_WRITE_TRSFR BIT(13) #define QSPI_IFR_CRM BIT(14) +#define QSPI_IFR_DDREN BIT(15) #define QSPI_IFR_NBDUM_MASK GENMASK(20, 16) #define QSPI_IFR_NBDUM(n) (((n) << 16) & QSPI_IFR_NBDUM_MASK) +#define QSPI_IFR_END BIT(22) +#define QSPI_IFR_SMRM BIT(23) #define QSPI_IFR_APBTFRTYP_READ BIT(24) /* Defined in SAM9X60 */ +#define QSPI_IFR_DQSEN BIT(25) +#define QSPI_IFR_DDRCMDEN BIT(26) +#define QSPI_IFR_HFWBEN BIT(27) +#define QSPI_IFR_PROTTYP GENMASK(29, 28) +#define QSPI_IFR_PROTTYP_STD_SPI 0 +#define QSPI_IFR_PROTTYP_TWIN_QUAD 1 +#define QSPI_IFR_PROTTYP_OCTAFLASH 2 +#define QSPI_IFR_PROTTYP_HYPERFLASH 3 /* Bitfields in QSPI_SMR (Scrambling Mode Register) */ #define QSPI_SMR_SCREN BIT(0) #define QSPI_SMR_RVDIS BIT(1) +#define QSPI_SMR_SCRKL BIT(2) + +/* Bitfields in QSPI_REFRESH (Refresh Register) */ +#define QSPI_REFRESH_DELAY_COUNTER GENMASK(31, 0) + +/* Bitfields in QSPI_WRACNT (Write Access Counter Register) */ +#define QSPI_WRACNT_NBWRA GENMASK(31, 0) + +/* Bitfields in QSPI_DLLCFG (DLL Configuration Register) */ +#define QSPI_DLLCFG_RANGE BIT(0) + +/* Bitfields in QSPI_PCALCFG (DLL Pad Calibration Configuration Register) */ +#define QSPI_PCALCFG_AAON BIT(0) +#define QSPI_PCALCFG_DAPCAL BIT(1) +#define QSPI_PCALCFG_DIFFPM BIT(2) +#define QSPI_PCALCFG_CLKDIV GENMASK(6, 4) +#define QSPI_PCALCFG_CALCNT GENMASK(16, 8) +#define QSPI_PCALCFG_CALP GENMASK(27, 24) +#define QSPI_PCALCFG_CALN GENMASK(31, 28) + +/* Bitfields in QSPI_PCALBP (DLL Pad Calibration Bypass Register) */ +#define QSPI_PCALBP_BPEN BIT(0) +#define QSPI_PCALBP_CALPBP GENMASK(11, 8) +#define QSPI_PCALBP_CALNBP GENMASK(19, 16) + +/* Bitfields in QSPI_TOUT (Timeout Register) */ +#define QSPI_TOUT_TCNTM GENMASK(15, 0) /* Bitfields in QSPI_WPMR (Write Protection Mode Register) */ #define QSPI_WPMR_WPEN BIT(0) +#define QSPI_WPMR_WPITEN BIT(1) +#define QSPI_WPMR_WPCREN BIT(2) #define QSPI_WPMR_WPKEY_MASK GENMASK(31, 8) #define QSPI_WPMR_WPKEY(wpkey) (((wpkey) << 8) & QSPI_WPMR_WPKEY_MASK) @@ -139,21 +222,61 @@ #define QSPI_WPSR_WPVSRC_MASK GENMASK(15, 8) #define QSPI_WPSR_WPVSRC(src) (((src) << 8) & QSPI_WPSR_WPVSRC) +#define ATMEL_QSPI_TIMEOUT 1000000 /* us */ +#define ATMEL_QSPI_SYNC_TIMEOUT 300000 /* us */ +#define QSPI_DLLCFG_THRESHOLD_FREQ 90000000U +#define QSPI_TOUT_MAX 0xffff + +/** + * struct atmel_qspi_pcal - Pad Calibration Clock Division + * @pclk_rate: peripheral clock rate. + * @pclkdiv: calibration clock division. The clock applied to the calibration + * cell is divided by pclkdiv + 1. + */ +struct atmel_qspi_pcal { + u32 pclk_rate; + u8 pclk_div; +}; + +#define ATMEL_QSPI_PCAL_ARRAY_SIZE 8 +static const struct atmel_qspi_pcal pcal[ATMEL_QSPI_PCAL_ARRAY_SIZE] = { + {25000000, 0}, + {50000000, 1}, + {75000000, 2}, + {100000000, 3}, + {125000000, 4}, + {150000000, 5}, + {175000000, 6}, + {200000000, 7}, +}; + struct atmel_qspi_caps { bool has_qspick; + bool has_gclk; bool has_ricr; + bool octal; }; +struct atmel_qspi_priv_ops; + struct atmel_qspi { void __iomem *regs; void __iomem *mem; resource_size_t mmap_size; const struct atmel_qspi_caps *caps; + const struct atmel_qspi_priv_ops *ops; struct udevice *dev; ulong bus_clk_rate; u32 mr; }; +struct atmel_qspi_priv_ops { + int (*set_cfg)(struct atmel_qspi *aq, const struct spi_mem_op *op, + u32 *offset); + int (*transfer)(struct atmel_qspi *aq, const struct spi_mem_op *op, + u32 offset); +}; + struct atmel_qspi_mode { u8 cmd_buswidth; u8 addr_buswidth; @@ -171,6 +294,19 @@ static const struct atmel_qspi_mode atmel_qspi_modes[] = { { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD }, }; +static const struct atmel_qspi_mode atmel_qspi_sama7g5_modes[] = { + { 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI }, + { 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT }, + { 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT }, + { 1, 2, 2, QSPI_IFR_WIDTH_DUAL_IO }, + { 1, 4, 4, QSPI_IFR_WIDTH_QUAD_IO }, + { 2, 2, 2, QSPI_IFR_WIDTH_DUAL_CMD }, + { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD }, + { 1, 1, 8, QSPI_IFR_WIDTH_OCT_OUTPUT }, + { 1, 8, 8, QSPI_IFR_WIDTH_OCT_IO }, + { 8, 8, 8, QSPI_IFR_WIDTH_OCT_CMD }, +}; + #ifdef VERBOSE_DEBUG static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) { @@ -180,7 +316,7 @@ static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) case QSPI_MR: return "MR"; case QSPI_RD: - return "MR"; + return "RD"; case QSPI_TD: return "TD"; case QSPI_SR: @@ -193,6 +329,8 @@ static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) return "IMR"; case QSPI_SCR: return "SCR"; + case QSPI_SR2: + return "SR2"; case QSPI_IAR: return "IAR"; case QSPI_ICR: @@ -205,6 +343,18 @@ static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz) return "SMR"; case QSPI_SKR: return "SKR"; + case QSPI_REFRESH: + return "REFRESH"; + case QSPI_WRACNT: + return "WRACNT"; + case QSPI_DLLCFG: + return "DLLCFG"; + case QSPI_PCALCFG: + return "PCALCFG"; + case QSPI_PCALBP: + return "PCALBP"; + case QSPI_TOUT: + return "TOUT"; case QSPI_WPMR: return "WPMR"; case QSPI_WPSR: @@ -272,9 +422,29 @@ static int atmel_qspi_find_mode(const struct spi_mem_op *op) return -ENOTSUPP; } +static int atmel_qspi_sama7g5_find_mode(const struct spi_mem_op *op) +{ + u32 i; + + for (i = 0; i < ARRAY_SIZE(atmel_qspi_sama7g5_modes); i++) + if (atmel_qspi_is_compatible(op, &atmel_qspi_sama7g5_modes[i])) + return i; + + return -EOPNOTSUPP; +} + static bool atmel_qspi_supports_op(struct spi_slave *slave, const struct spi_mem_op *op) { + struct atmel_qspi *aq = dev_get_priv(slave->dev->parent); + + if (aq->caps->octal) { + if (atmel_qspi_sama7g5_find_mode(op) < 0) + return false; + else + return true; + } + if (atmel_qspi_find_mode(op) < 0) return false; @@ -397,24 +567,10 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq, return 0; } -static int atmel_qspi_exec_op(struct spi_slave *slave, - const struct spi_mem_op *op) +static int atmel_qspi_transfer(struct atmel_qspi *aq, + const struct spi_mem_op *op, u32 offset) { - struct atmel_qspi *aq = dev_get_priv(slave->dev->parent); - u32 sr, imr, offset; - int err; - - /* - * Check if the address exceeds the MMIO window size. An improvement - * would be to add support for regular SPI mode and fall back to it - * when the flash memories overrun the controller's memory space. - */ - if (op->addr.val + op->data.nbytes > aq->mmap_size) - return -ENOTSUPP; - - err = atmel_qspi_set_cfg(aq, op, &offset); - if (err) - return err; + u32 sr, imr; /* Skip to the final steps if there is no data */ if (op->data.nbytes) { @@ -436,7 +592,341 @@ static int atmel_qspi_exec_op(struct spi_slave *slave, /* Poll INSTruction End and Chip Select Rise flags. */ imr = QSPI_SR_INSTRE | QSPI_SR_CSR; return readl_poll_timeout(aq->regs + QSPI_SR, sr, (sr & imr) == imr, - 1000000); + ATMEL_QSPI_TIMEOUT); +} + +static int atmel_qspi_reg_sync(struct atmel_qspi *aq) +{ + u32 val; + + return readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_SYNCBSY), + ATMEL_QSPI_SYNC_TIMEOUT); +} + +static int atmel_qspi_update_config(struct atmel_qspi *aq) +{ + int ret; + + ret = atmel_qspi_reg_sync(aq); + if (ret) + return ret; + atmel_qspi_write(QSPI_CR_UPDCFG, aq, QSPI_CR); + return atmel_qspi_reg_sync(aq); +} + +static int atmel_qspi_sama7g5_set_cfg(struct atmel_qspi *aq, + const struct spi_mem_op *op, u32 *offset) +{ + u32 iar, icr, ifr; + int mode, ret; + + iar = 0; + icr = FIELD_PREP(QSPI_ICR_INST_MASK_SAMA7G5, op->cmd.opcode); + ifr = QSPI_IFR_INSTEN; + + mode = atmel_qspi_sama7g5_find_mode(op); + if (mode < 0) + return mode; + ifr |= atmel_qspi_sama7g5_modes[mode].config; + + if (op->dummy.buswidth && op->dummy.nbytes) { + if (op->addr.dtr && op->dummy.dtr && op->data.dtr) + ifr |= QSPI_IFR_NBDUM(op->dummy.nbytes * 8 / + (2 * op->dummy.buswidth)); + else + ifr |= QSPI_IFR_NBDUM(op->dummy.nbytes * 8 / + op->dummy.buswidth); + } + + if (op->addr.buswidth && op->addr.nbytes) { + ifr |= FIELD_PREP(QSPI_IFR_ADDRL_SAMA7G5, op->addr.nbytes - 1) | + QSPI_IFR_ADDREN; + iar = FIELD_PREP(QSPI_IAR_ADDR, op->addr.val); + } + + if (op->addr.dtr && op->dummy.dtr && op->data.dtr) { + ifr |= QSPI_IFR_DDREN; + if (op->cmd.dtr) + ifr |= QSPI_IFR_DDRCMDEN; + ifr |= QSPI_IFR_DQSEN; + } + + if (op->cmd.buswidth == 8 || op->addr.buswidth == 8 || + op->data.buswidth == 8) + ifr |= FIELD_PREP(QSPI_IFR_PROTTYP, QSPI_IFR_PROTTYP_OCTAFLASH); + + /* offset of the data access in the QSPI memory space */ + *offset = iar; + + /* Set data enable */ + if (op->data.nbytes) { + ifr |= QSPI_IFR_DATAEN; + if (op->addr.nbytes) + ifr |= QSPI_IFR_TFRTYP_MEM; + } + + /* + * If the QSPI controller is set in regular SPI mode, set it in + * Serial Memory Mode (SMM). + */ + if (aq->mr != QSPI_MR_SMM) { + atmel_qspi_write(QSPI_MR_SMM | QSPI_MR_DQSDLYEN, aq, QSPI_MR); + ret = atmel_qspi_update_config(aq); + if (ret) + return ret; + aq->mr = QSPI_MR_SMM; + } + + /* Clear pending interrupts */ + (void)atmel_qspi_read(aq, QSPI_SR); + + /* Set QSPI Instruction Frame registers */ + if (op->addr.nbytes && !op->data.nbytes) + atmel_qspi_write(iar, aq, QSPI_IAR); + + if (op->data.dir == SPI_MEM_DATA_IN) { + atmel_qspi_write(icr, aq, QSPI_RICR); + } else { + atmel_qspi_write(icr, aq, QSPI_WICR); + if (op->data.nbytes) + atmel_qspi_write(FIELD_PREP(QSPI_WRACNT_NBWRA, + op->data.nbytes), + aq, QSPI_WRACNT); + } + + atmel_qspi_write(ifr, aq, QSPI_IFR); + + return atmel_qspi_update_config(aq); +} + +static int atmel_qspi_sama7g5_transfer(struct atmel_qspi *aq, + const struct spi_mem_op *op, u32 offset) +{ + int err; + u32 val; + + if (!op->data.nbytes) { + /* Start the transfer. */ + err = atmel_qspi_reg_sync(aq); + if (err) + return err; + atmel_qspi_write(QSPI_CR_STTFR, aq, QSPI_CR); + + return readl_poll_timeout(aq->regs + QSPI_SR, val, + val & QSPI_SR_CSRA, + ATMEL_QSPI_TIMEOUT); + } + + /* Send/Receive data. */ + if (op->data.dir == SPI_MEM_DATA_IN) { + memcpy_fromio(op->data.buf.in, aq->mem + offset, + op->data.nbytes); + + if (op->addr.nbytes) { + err = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_RBUSY), + ATMEL_QSPI_SYNC_TIMEOUT); + if (err) + return err; + } + } else { + memcpy_toio(aq->mem + offset, op->data.buf.out, + op->data.nbytes); + + err = readl_poll_timeout(aq->regs + QSPI_SR, val, + val & QSPI_SR_LWRA, + ATMEL_QSPI_TIMEOUT); + if (err) + return err; + } + + /* Release the chip-select. */ + err = atmel_qspi_reg_sync(aq); + if (err) + return err; + atmel_qspi_write(QSPI_CR_LASTXFER, aq, QSPI_CR); + + return readl_poll_timeout(aq->regs + QSPI_SR, val, val & QSPI_SR_CSRA, + ATMEL_QSPI_TIMEOUT); +} + +static int atmel_qspi_exec_op(struct spi_slave *slave, + const struct spi_mem_op *op) +{ + struct atmel_qspi *aq = dev_get_priv(slave->dev->parent); + u32 offset; + int err; + + /* + * Check if the address exceeds the MMIO window size. An improvement + * would be to add support for regular SPI mode and fall back to it + * when the flash memories overrun the controller's memory space. + */ + if (op->addr.val + op->data.nbytes > aq->mmap_size) + return -ENOTSUPP; + + if (op->addr.nbytes > 4) + return -EOPNOTSUPP; + + err = aq->ops->set_cfg(aq, op, &offset); + if (err) + return err; + + return aq->ops->transfer(aq, op, offset); +} + +static int atmel_qspi_set_pad_calibration(struct udevice *bus, uint hz) +{ + struct atmel_qspi *aq = dev_get_priv(bus); + u32 status, val; + int i, ret; + u8 pclk_div = 0; + + for (i = 0; i < ATMEL_QSPI_PCAL_ARRAY_SIZE; i++) { + if (aq->bus_clk_rate <= pcal[i].pclk_rate) { + pclk_div = pcal[i].pclk_div; + break; + } + } + + /* + * Use the biggest divider in case the peripheral clock exceeds + * 200MHZ. + */ + if (aq->bus_clk_rate > pcal[ATMEL_QSPI_PCAL_ARRAY_SIZE - 1].pclk_rate) + pclk_div = pcal[ATMEL_QSPI_PCAL_ARRAY_SIZE - 1].pclk_div; + + /* Disable QSPI while configuring the pad calibration. */ + status = atmel_qspi_read(aq, QSPI_SR2); + if (status & QSPI_SR2_QSPIENS) { + ret = atmel_qspi_reg_sync(aq); + if (ret) + return ret; + atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR); + } + + /* + * The analog circuitry is not shut down at the end of the calibration + * and the start-up time is only required for the first calibration + * sequence, thus increasing performance. Set the delay between the Pad + * calibration analog circuitry and the calibration request to 2us. + */ + atmel_qspi_write(QSPI_PCALCFG_AAON | + FIELD_PREP(QSPI_PCALCFG_CLKDIV, pclk_div) | + FIELD_PREP(QSPI_PCALCFG_CALCNT, + 2 * (aq->bus_clk_rate / 1000000)), + aq, QSPI_PCALCFG); + + /* DLL On + start calibration. */ + atmel_qspi_write(QSPI_CR_DLLON | QSPI_CR_STPCAL, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + (val & QSPI_SR2_DLOCK) && + !(val & QSPI_SR2_CALBSY), + ATMEL_QSPI_TIMEOUT); + + /* Refresh analogic blocks every 1 ms.*/ + atmel_qspi_write(FIELD_PREP(QSPI_REFRESH_DELAY_COUNTER, hz / 1000), + aq, QSPI_REFRESH); + + return ret; +} + +static int atmel_qspi_set_gclk(struct udevice *bus, uint hz) +{ + struct atmel_qspi *aq = dev_get_priv(bus); + struct clk gclk; + u32 status, val; + int ret; + + /* Disable DLL before setting GCLK */ + status = atmel_qspi_read(aq, QSPI_SR2); + if (status & QSPI_SR2_DLOCK) { + atmel_qspi_write(QSPI_CR_DLLOFF, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_DLOCK), + ATMEL_QSPI_TIMEOUT); + if (ret) + return ret; + } + + if (hz > QSPI_DLLCFG_THRESHOLD_FREQ) + atmel_qspi_write(QSPI_DLLCFG_RANGE, aq, QSPI_DLLCFG); + else + atmel_qspi_write(0, aq, QSPI_DLLCFG); + + ret = clk_get_by_name(bus, "gclk", &gclk); + if (ret) { + dev_err(bus, "Missing QSPI generic clock\n"); + return ret; + } + + ret = clk_disable(&gclk); + if (ret) + dev_err(bus, "Failed to disable QSPI generic clock\n"); + + ret = clk_set_rate(&gclk, hz); + if (ret < 0) { + dev_err(bus, "Failed to set generic clock rate.\n"); + return ret; + } + + ret = clk_enable(&gclk); + if (ret) + dev_err(bus, "Failed to enable QSPI generic clock\n"); + clk_free(&gclk); + + return ret; +} + +static int atmel_qspi_sama7g5_set_speed(struct udevice *bus, uint hz) +{ + struct atmel_qspi *aq = dev_get_priv(bus); + u32 val; + int ret; + + ret = atmel_qspi_set_gclk(bus, hz); + if (ret) + return ret; + + if (aq->caps->octal) { + ret = atmel_qspi_set_pad_calibration(bus, hz); + if (ret) + return ret; + } else { + atmel_qspi_write(QSPI_CR_DLLON, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + val & QSPI_SR2_DLOCK, + ATMEL_QSPI_TIMEOUT); + } + + /* Set the QSPI controller by default in Serial Memory Mode */ + atmel_qspi_write(QSPI_MR_SMM | QSPI_MR_DQSDLYEN, aq, QSPI_MR); + ret = atmel_qspi_update_config(aq); + if (ret) + return ret; + aq->mr = QSPI_MR_SMM; + + /* Enable the QSPI controller. */ + ret = atmel_qspi_reg_sync(aq); + if (ret) + return ret; + atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + val & QSPI_SR2_QSPIENS, + ATMEL_QSPI_SYNC_TIMEOUT); + if (ret) + return ret; + + if (aq->caps->octal) + ret = readl_poll_timeout(aq->regs + QSPI_SR, val, + val & QSPI_SR_RFRSHD, + ATMEL_QSPI_TIMEOUT); + + atmel_qspi_write(FIELD_PREP(QSPI_TOUT_TCNTM, QSPI_TOUT_MAX), + aq, QSPI_TOUT); + + return ret; } static int atmel_qspi_set_speed(struct udevice *bus, uint hz) @@ -444,6 +934,9 @@ static int atmel_qspi_set_speed(struct udevice *bus, uint hz) struct atmel_qspi *aq = dev_get_priv(bus); u32 scr, scbr, mask, new_value; + if (aq->caps->has_gclk) + return atmel_qspi_sama7g5_set_speed(bus, hz); + /* Compute the QSPI baudrate */ scbr = DIV_ROUND_UP(aq->bus_clk_rate, hz); if (scbr > 0) @@ -480,6 +973,8 @@ static int atmel_qspi_set_mode(struct udevice *bus, uint mode) scr = (scr & ~mask) | new_value; atmel_qspi_write(scr, aq, QSPI_SCR); + if (aq->caps->has_gclk) + return atmel_qspi_update_config(aq); return 0; } @@ -487,7 +982,7 @@ static int atmel_qspi_set_mode(struct udevice *bus, uint mode) static int atmel_qspi_enable_clk(struct udevice *dev) { struct atmel_qspi *aq = dev_get_priv(dev); - struct clk pclk, qspick; + struct clk pclk, qspick, gclk; int ret; ret = clk_get_by_name(dev, "pclk", &pclk); @@ -517,6 +1012,17 @@ static int atmel_qspi_enable_clk(struct udevice *dev) if (ret) dev_err(dev, "Failed to enable QSPI system clock\n"); clk_free(&qspick); + } else if (aq->caps->has_gclk) { + ret = clk_get_by_name(dev, "gclk", &gclk); + if (ret) { + dev_err(dev, "Missing QSPI generic clock\n"); + goto free_pclk; + } + + ret = clk_enable(&gclk); + if (ret) + dev_err(dev, "Failed to enable QSPI system clock\n"); + clk_free(&gclk); } aq->bus_clk_rate = clk_get_rate(&pclk); @@ -529,8 +1035,18 @@ free_pclk: return ret; } -static void atmel_qspi_init(struct atmel_qspi *aq) +static int atmel_qspi_init(struct atmel_qspi *aq) { + int ret; + + if (aq->caps->has_gclk) { + ret = atmel_qspi_reg_sync(aq); + if (ret) + return ret; + atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR); + return 0; + } + /* Reset the QSPI controller */ atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR); @@ -540,8 +1056,20 @@ static void atmel_qspi_init(struct atmel_qspi *aq) /* Enable the QSPI controller */ atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR); + + return 0; } +static const struct atmel_qspi_priv_ops atmel_qspi_priv_ops = { + .set_cfg = atmel_qspi_set_cfg, + .transfer = atmel_qspi_transfer, +}; + +static const struct atmel_qspi_priv_ops atmel_qspi_sama7g5_priv_ops = { + .set_cfg = atmel_qspi_sama7g5_set_cfg, + .transfer = atmel_qspi_sama7g5_transfer, +}; + static int atmel_qspi_probe(struct udevice *dev) { struct atmel_qspi *aq = dev_get_priv(dev); @@ -554,6 +1082,11 @@ static int atmel_qspi_probe(struct udevice *dev) return -EINVAL; }; + if (aq->caps->has_gclk) + aq->ops = &atmel_qspi_sama7g5_priv_ops; + else + aq->ops = &atmel_qspi_priv_ops; + /* Map the registers */ ret = dev_read_resource_byname(dev, "qspi_base", &res); if (ret) { @@ -583,10 +1116,7 @@ static int atmel_qspi_probe(struct udevice *dev) return ret; aq->dev = dev; - - atmel_qspi_init(aq); - - return 0; + return atmel_qspi_init(aq); } static const struct spi_controller_mem_ops atmel_qspi_mem_ops = { @@ -607,6 +1137,15 @@ static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = { .has_ricr = true, }; +static const struct atmel_qspi_caps atmel_sama7g5_ospi_caps = { + .has_gclk = true, + .octal = true, +}; + +static const struct atmel_qspi_caps atmel_sama7g5_qspi_caps = { + .has_gclk = true, +}; + static const struct udevice_id atmel_qspi_ids[] = { { .compatible = "atmel,sama5d2-qspi", @@ -616,6 +1155,14 @@ static const struct udevice_id atmel_qspi_ids[] = { .compatible = "microchip,sam9x60-qspi", .data = (ulong)&atmel_sam9x60_qspi_caps, }, + { + .compatible = "microchip,sama7g5-ospi", + .data = (ulong)&atmel_sama7g5_ospi_caps, + }, + { + .compatible = "microchip,sama7g5-qspi", + .data = (ulong)&atmel_sama7g5_qspi_caps, + }, { /* sentinel */ } }; diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 8d40ce6..a8ef926 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -87,16 +87,6 @@ #define OPTEE_MSG_ATTR_CACHE_PREDEFINED 0 /* - * Same values as TEE_LOGIN_* from TEE Internal API - */ -#define OPTEE_MSG_LOGIN_PUBLIC 0x00000000 -#define OPTEE_MSG_LOGIN_USER 0x00000001 -#define OPTEE_MSG_LOGIN_GROUP 0x00000002 -#define OPTEE_MSG_LOGIN_APPLICATION 0x00000004 -#define OPTEE_MSG_LOGIN_APPLICATION_USER 0x00000005 -#define OPTEE_MSG_LOGIN_APPLICATION_GROUP 0x00000006 - -/* * Page size used in non-contiguous buffer entries */ #define OPTEE_MSG_NONCONTIG_PAGE_SIZE 4096 @@ -279,7 +269,7 @@ struct optee_msg_arg { * parameters to pass the following information: * param[0].u.value.a-b uuid of Trusted Application * param[1].u.value.a-b uuid of Client - * param[1].u.value.c Login class of client OPTEE_MSG_LOGIN_* + * param[1].u.value.c Login class of client TEE_LOGIN_* * * OPTEE_MSG_CMD_INVOKE_COMMAND invokes a command a previously opened * session to a Trusted Application. struct optee_msg_arg::func is Trusted diff --git a/drivers/timer/ostm_timer.c b/drivers/timer/ostm_timer.c index 24813de..3ec729d 100644 --- a/drivers/timer/ostm_timer.c +++ b/drivers/timer/ostm_timer.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <malloc.h> #include <asm/global_data.h> #include <asm/io.h> @@ -51,7 +52,7 @@ static int ostm_probe(struct udevice *dev) clk_free(&clk); #else - uc_priv->clock_rate = CONFIG_SYS_CLK_FREQ / 2; + uc_priv->clock_rate = get_board_sys_clk() / 2; #endif readb(priv->regs + OSTM_CTL); diff --git a/drivers/usb/cdns3/cdns3-ti.c b/drivers/usb/cdns3/cdns3-ti.c index 4317167..8958f01 100644 --- a/drivers/usb/cdns3/cdns3-ti.c +++ b/drivers/usb/cdns3/cdns3-ti.c @@ -180,6 +180,7 @@ static int cdns_ti_remove(struct udevice *dev) static const struct udevice_id cdns_ti_of_match[] = { { .compatible = "ti,j721e-usb", }, + { .compatible = "ti,am64-usb", }, {}, }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index a58f87f..cfa08b5 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -14,6 +14,17 @@ config DM_VIDEO option compiles in the video uclass and routes all LCD/video access through this. +config VIDEO_LOGO + bool "Show the U-Boot logo on the display" + depends on DM_VIDEO + default y if !SPLASH_SCREEN + select VIDEO_BMP_RLE8 + help + This enables showing the U-Boot logo on the display when a video + device is probed. It appears at the top right. The logo itself is at + tools/logos/u-boot_logo.bmp and looks best when the display has a + black background. + config BACKLIGHT bool "Enable panel backlight uclass support" depends on DM_VIDEO diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 8956b5f..4038395 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -17,6 +17,9 @@ obj-$(CONFIG_DM_VIDEO) += video_bmp.o obj-$(CONFIG_PANEL) += panel-uclass.o obj-$(CONFIG_DM_PANEL_HX8238D) += hx8238d.o obj-$(CONFIG_SIMPLE_PANEL) += simple_panel.o + +obj-$(CONFIG_VIDEO_LOGO) += u_boot_logo.o + endif obj-${CONFIG_EXYNOS_FB} += exynos/ diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 7df7d57..52b109f 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -42,11 +42,6 @@ * VIDEO_TSTC_FCT - keyboard_tstc function * VIDEO_GETC_FCT - keyboard_getc function * - * CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner. - * Use CONFIG_SPLASH_SCREEN_ALIGN with - * environment variable "splashpos" to place - * the logo on other position. In this case - * no CONSOLE_EXTRA_INFO is possible. * CONFIG_VIDEO_BMP_LOGO - use bmp_logo instead of linux_logo * CONFIG_CONSOLE_EXTRA_INFO - display additional board information * strings that normaly goes to serial @@ -127,34 +122,6 @@ void console_cursor(int state); #define CURSOR_SET video_set_cursor() #endif /* CONFIG_VIDEO_SW_CURSOR */ -#ifdef CONFIG_VIDEO_LOGO -#ifdef CONFIG_VIDEO_BMP_LOGO -#include <bmp_logo.h> -#include <bmp_logo_data.h> -#define VIDEO_LOGO_WIDTH BMP_LOGO_WIDTH -#define VIDEO_LOGO_HEIGHT BMP_LOGO_HEIGHT -#define VIDEO_LOGO_LUT_OFFSET BMP_LOGO_OFFSET -#define VIDEO_LOGO_COLORS BMP_LOGO_COLORS - -#else /* CONFIG_VIDEO_BMP_LOGO */ -#define LINUX_LOGO_WIDTH 80 -#define LINUX_LOGO_HEIGHT 80 -#define LINUX_LOGO_COLORS 214 -#define LINUX_LOGO_LUT_OFFSET 0x20 -#define __initdata -#include <linux_logo.h> -#define VIDEO_LOGO_WIDTH LINUX_LOGO_WIDTH -#define VIDEO_LOGO_HEIGHT LINUX_LOGO_HEIGHT -#define VIDEO_LOGO_LUT_OFFSET LINUX_LOGO_LUT_OFFSET -#define VIDEO_LOGO_COLORS LINUX_LOGO_COLORS -#endif /* CONFIG_VIDEO_BMP_LOGO */ -#define VIDEO_INFO_X (VIDEO_LOGO_WIDTH) -#define VIDEO_INFO_Y (VIDEO_FONT_HEIGHT/2) -#else /* CONFIG_VIDEO_LOGO */ -#define VIDEO_LOGO_WIDTH 0 -#define VIDEO_LOGO_HEIGHT 0 -#endif /* CONFIG_VIDEO_LOGO */ - #define VIDEO_COLS VIDEO_VISIBLE_COLS #define VIDEO_ROWS VIDEO_VISIBLE_ROWS #ifndef VIDEO_LINE_LEN @@ -163,11 +130,7 @@ void console_cursor(int state); #define VIDEO_SIZE (VIDEO_ROWS * VIDEO_LINE_LEN) #define VIDEO_BURST_LEN (VIDEO_COLS/8) -#ifdef CONFIG_VIDEO_LOGO -#define CONSOLE_ROWS ((VIDEO_ROWS - video_logo_height) / VIDEO_FONT_HEIGHT) -#else #define CONSOLE_ROWS (VIDEO_ROWS / VIDEO_FONT_HEIGHT) -#endif #define CONSOLE_COLS (VIDEO_COLS / VIDEO_FONT_WIDTH) #define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN) @@ -214,7 +177,7 @@ static GraphicDevice *pGD; /* Pointer to Graphic array */ static void *video_fb_address; /* frame buffer address */ static void *video_console_address; /* console buffer start address */ -static int video_logo_height = VIDEO_LOGO_HEIGHT; +static int video_logo_height; /* not supported anymore */ static int __maybe_unused cursor_state; static int __maybe_unused old_col; @@ -1670,292 +1633,6 @@ int video_display_bitmap(ulong bmp_image, int x, int y) } #endif - -#ifdef CONFIG_VIDEO_LOGO -static int video_logo_xpos; -static int video_logo_ypos; - -static void plot_logo_or_black(void *screen, int x, int y, int black); - -static void logo_plot(void *screen, int x, int y) -{ - plot_logo_or_black(screen, x, y, 0); -} - -static void logo_black(void) -{ - plot_logo_or_black(video_fb_address, video_logo_xpos, video_logo_ypos, - 1); -} - -static int do_clrlogo(struct cmd_tbl *cmdtp, int flag, int argc, - char *const argv[]) -{ - if (argc != 1) - return cmd_usage(cmdtp); - - logo_black(); - return 0; -} - -U_BOOT_CMD( - clrlogo, 1, 0, do_clrlogo, - "fill the boot logo area with black", - " " - ); - -static void plot_logo_or_black(void *screen, int x, int y, int black) -{ - - int xcount, i; - int skip = VIDEO_LINE_LEN - VIDEO_LOGO_WIDTH * VIDEO_PIXEL_SIZE; - int ycount = video_logo_height; - unsigned char r, g, b, *logo_red, *logo_blue, *logo_green; - unsigned char *source; - unsigned char *dest; - -#ifdef CONFIG_SPLASH_SCREEN_ALIGN - if (x == BMP_ALIGN_CENTER) - x = max(0, (int)(VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH) / 2); - else if (x < 0) - x = max(0, (int)(VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH + x + 1)); - - if (y == BMP_ALIGN_CENTER) - y = max(0, (int)(VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT) / 2); - else if (y < 0) - y = max(0, (int)(VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT + y + 1)); -#endif /* CONFIG_SPLASH_SCREEN_ALIGN */ - - dest = (unsigned char *)screen + y * VIDEO_LINE_LEN + x * VIDEO_PIXEL_SIZE; - -#ifdef CONFIG_VIDEO_BMP_LOGO - source = bmp_logo_bitmap; - - /* Allocate temporary space for computing colormap */ - logo_red = malloc(BMP_LOGO_COLORS); - logo_green = malloc(BMP_LOGO_COLORS); - logo_blue = malloc(BMP_LOGO_COLORS); - /* Compute color map */ - for (i = 0; i < VIDEO_LOGO_COLORS; i++) { - logo_red[i] = (bmp_logo_palette[i] & 0x0f00) >> 4; - logo_green[i] = (bmp_logo_palette[i] & 0x00f0); - logo_blue[i] = (bmp_logo_palette[i] & 0x000f) << 4; - } -#else - source = linux_logo; - logo_red = linux_logo_red; - logo_green = linux_logo_green; - logo_blue = linux_logo_blue; -#endif - - if (VIDEO_DATA_FORMAT == GDF__8BIT_INDEX) { - for (i = 0; i < VIDEO_LOGO_COLORS; i++) { - video_set_lut(i + VIDEO_LOGO_LUT_OFFSET, - logo_red[i], logo_green[i], - logo_blue[i]); - } - } - - while (ycount--) { -#if defined(VIDEO_FB_16BPP_PIXEL_SWAP) - int xpos = x; -#endif - xcount = VIDEO_LOGO_WIDTH; - while (xcount--) { - if (black) { - r = 0x00; - g = 0x00; - b = 0x00; - } else { - r = logo_red[*source - VIDEO_LOGO_LUT_OFFSET]; - g = logo_green[*source - VIDEO_LOGO_LUT_OFFSET]; - b = logo_blue[*source - VIDEO_LOGO_LUT_OFFSET]; - } - - switch (VIDEO_DATA_FORMAT) { - case GDF__8BIT_INDEX: - *dest = *source; - break; - case GDF__8BIT_332RGB: - *dest = ((r >> 5) << 5) | - ((g >> 5) << 2) | - (b >> 6); - break; - case GDF_15BIT_555RGB: -#if defined(VIDEO_FB_16BPP_PIXEL_SWAP) - fill_555rgb_pswap(dest, xpos++, r, g, b); -#else - *(unsigned short *) dest = - SWAP16((unsigned short) ( - ((r >> 3) << 10) | - ((g >> 3) << 5) | - (b >> 3))); -#endif - break; - case GDF_16BIT_565RGB: - *(unsigned short *) dest = - SWAP16((unsigned short) ( - ((r >> 3) << 11) | - ((g >> 2) << 5) | - (b >> 3))); - break; - case GDF_32BIT_X888RGB: - *(u32 *) dest = - SWAP32((u32) ( - (r << 16) | - (g << 8) | - b)); - break; - case GDF_24BIT_888RGB: -#ifdef VIDEO_FB_LITTLE_ENDIAN - dest[0] = b; - dest[1] = g; - dest[2] = r; -#else - dest[0] = r; - dest[1] = g; - dest[2] = b; -#endif - break; - } - source++; - dest += VIDEO_PIXEL_SIZE; - } - dest += skip; - } -#ifdef CONFIG_VIDEO_BMP_LOGO - free(logo_red); - free(logo_green); - free(logo_blue); -#endif -} - -static void *video_logo(void) -{ - char info[128]; - __maybe_unused int y_off = 0; - __maybe_unused ulong addr; - __maybe_unused char *s; - __maybe_unused int len, ret, space; - - splash_get_pos(&video_logo_xpos, &video_logo_ypos); - -#ifdef CONFIG_SPLASH_SCREEN - s = env_get("splashimage"); - if (s != NULL) { - ret = splash_screen_prepare(); - if (ret < 0) - return video_fb_address; - addr = hextoul(s, NULL); - - if (video_display_bitmap(addr, - video_logo_xpos, - video_logo_ypos) == 0) { - video_logo_height = 0; - return ((void *) (video_fb_address)); - } - } -#endif /* CONFIG_SPLASH_SCREEN */ - - logo_plot(video_fb_address, video_logo_xpos, video_logo_ypos); - -#ifdef CONFIG_SPLASH_SCREEN_ALIGN - /* - * when using splashpos for video_logo, skip any info - * output on video console if the logo is not at 0,0 - */ - if (video_logo_xpos || video_logo_ypos) { - /* - * video_logo_height is used in text and cursor offset - * calculations. Since the console is below the logo, - * we need to adjust the logo height - */ - if (video_logo_ypos == BMP_ALIGN_CENTER) - video_logo_height += max(0, (int)(VIDEO_VISIBLE_ROWS - - VIDEO_LOGO_HEIGHT) / 2); - else if (video_logo_ypos > 0) - video_logo_height += video_logo_ypos; - - return video_fb_address + video_logo_height * VIDEO_LINE_LEN; - } -#endif - if (board_cfb_skip()) - return 0; - - sprintf(info, " %s", version_string); - -#ifndef CONFIG_HIDE_LOGO_VERSION - space = (VIDEO_COLS - VIDEO_INFO_X) / VIDEO_FONT_WIDTH; - len = strlen(info); - - if (len > space) { - int xx = VIDEO_INFO_X, yy = VIDEO_INFO_Y; - uchar *p = (uchar *) info; - - while (len) { - if (len > space) { - video_drawchars(xx, yy, p, space); - len -= space; - - p = (uchar *)p + space; - - if (!y_off) { - xx += VIDEO_FONT_WIDTH; - space--; - } - yy += VIDEO_FONT_HEIGHT; - - y_off++; - } else { - video_drawchars(xx, yy, p, len); - len = 0; - } - } - } else - video_drawstring(VIDEO_INFO_X, VIDEO_INFO_Y, (uchar *) info); - -#ifdef CONFIG_CONSOLE_EXTRA_INFO - { - int i, n = - ((video_logo_height - - VIDEO_FONT_HEIGHT) / VIDEO_FONT_HEIGHT); - - for (i = 1; i < n; i++) { - video_get_info_str(i, info); - if (!*info) - continue; - - len = strlen(info); - if (len > space) { - video_drawchars(VIDEO_INFO_X, - VIDEO_INFO_Y + - (i + y_off) * - VIDEO_FONT_HEIGHT, - (uchar *) info, space); - y_off++; - video_drawchars(VIDEO_INFO_X + - VIDEO_FONT_WIDTH, - VIDEO_INFO_Y + - (i + y_off) * - VIDEO_FONT_HEIGHT, - (uchar *) info + space, - len - space); - } else { - video_drawstring(VIDEO_INFO_X, - VIDEO_INFO_Y + - (i + y_off) * - VIDEO_FONT_HEIGHT, - (uchar *) info); - } - } - } -#endif -#endif - - return (video_fb_address + video_logo_height * VIDEO_LINE_LEN); -} -#endif - static int cfb_fb_is_in_dram(void) { struct bd_info *bd = gd->bd; diff --git a/drivers/video/console_truetype.c b/drivers/video/console_truetype.c index 98427f4..de8b86b 100644 --- a/drivers/video/console_truetype.c +++ b/drivers/video/console_truetype.c @@ -274,6 +274,27 @@ static int console_truetype_putc_xy(struct udevice *dev, uint x, uint y, */ for (row = 0; row < height; row++) { switch (vid_priv->bpix) { + case VIDEO_BPP8: + if (IS_ENABLED(CONFIG_VIDEO_BPP8)) { + u8 *dst = line + xoff; + int i; + + for (i = 0; i < width; i++) { + int val = *bits; + int out; + + if (vid_priv->colour_bg) + val = 255 - val; + out = val; + if (vid_priv->colour_fg) + *dst++ |= out; + else + *dst++ &= out; + bits++; + } + end = dst; + } + break; #ifdef CONFIG_VIDEO_BPP16 case VIDEO_BPP16: { uint16_t *dst = (uint16_t *)line + xoff; diff --git a/drivers/video/sandbox_sdl.c b/drivers/video/sandbox_sdl.c index 5956b59..9081c7d 100644 --- a/drivers/video/sandbox_sdl.c +++ b/drivers/video/sandbox_sdl.c @@ -12,6 +12,7 @@ #include <asm/sdl.h> #include <asm/state.h> #include <asm/u-boot-sandbox.h> +#include <dm/device-internal.h> #include <dm/test.h> DECLARE_GLOBAL_DATA_PTR; @@ -43,27 +44,86 @@ static int sandbox_sdl_probe(struct udevice *dev) uc_priv->vidconsole_drv_name = plat->vidconsole_drv_name; uc_priv->font_size = plat->font_size; if (IS_ENABLED(CONFIG_VIDEO_COPY)) - uc_plat->copy_base = uc_plat->base - uc_plat->size / 2; + uc_plat->copy_base = uc_plat->base + uc_plat->size / 2; return 0; } -static int sandbox_sdl_bind(struct udevice *dev) +static void set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp) { struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev); struct sandbox_sdl_plat *plat = dev_get_plat(dev); - int ret = 0; - plat->xres = dev_read_u32_default(dev, "xres", LCD_MAX_WIDTH); - plat->yres = dev_read_u32_default(dev, "yres", LCD_MAX_HEIGHT); - plat->bpix = dev_read_u32_default(dev, "log2-depth", VIDEO_BPP16); - plat->rot = dev_read_u32_default(dev, "rotate", 0); - uc_plat->size = plat->xres * plat->yres * (1 << plat->bpix) / 8; + plat->bpix = l2bpp; + + uc_plat->size = plat->xres * plat->yres * VNBYTES(plat->bpix); + + /* + * Set up to the maximum size we'll ever need. This is a strange case. + * The video memory is allocated by video_post_bind() called from + * board_init_r(). If a test changes the reoslution so it needs more + * memory later (with sandbox_sdl_set_bpp()), it is too late to make + * the frame buffer larger. + * + * So use a maximum size here. + */ + uc_plat->size = max(uc_plat->size, 1920U * 1080 * VNBYTES(VIDEO_BPP32)); /* Allow space for two buffers, the lower one being the copy buffer */ log_debug("Frame buffer size %x\n", uc_plat->size); + + /* + * If a copy framebuffer is used, double the size and use the last half + * as the copy, with the first half as the normal frame buffer. + */ if (IS_ENABLED(CONFIG_VIDEO_COPY)) uc_plat->size *= 2; +} + +int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp) +{ + struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev); + int ret; + + if (device_active(dev)) + return -EINVAL; + sandbox_sdl_remove_display(); + + uc_plat->hide_logo = true; + set_bpp(dev, l2bpp); + + ret = device_probe(dev); + if (ret) + return ret; + + return 0; +} + +static int sandbox_sdl_remove(struct udevice *dev) +{ + /* + * Removing the display it a bit annoying when running unit tests, since + * they remove all devices. It is nice to be able to see what the test + * wrote onto the display. So this comment is just here to show how to + * do it, if we want to make it optional one day. + * + * sandbox_sdl_remove_display(); + */ + return 0; +} + +static int sandbox_sdl_bind(struct udevice *dev) +{ + struct sandbox_sdl_plat *plat = dev_get_plat(dev); + enum video_log2_bpp l2bpp; + int ret = 0; + + plat->xres = dev_read_u32_default(dev, "xres", LCD_MAX_WIDTH); + plat->yres = dev_read_u32_default(dev, "yres", LCD_MAX_HEIGHT); + l2bpp = dev_read_u32_default(dev, "log2-depth", VIDEO_BPP16); + plat->rot = dev_read_u32_default(dev, "rotate", 0); + + set_bpp(dev, l2bpp); return ret; } @@ -79,5 +139,6 @@ U_BOOT_DRIVER(sandbox_lcd_sdl) = { .of_match = sandbox_sdl_ids, .bind = sandbox_sdl_bind, .probe = sandbox_sdl_probe, + .remove = sandbox_sdl_remove, .plat_auto = sizeof(struct sandbox_sdl_plat), }; diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c index 65c882d..87e5fd5 100644 --- a/drivers/video/stm32/stm32_ltdc.c +++ b/drivers/video/stm32/stm32_ltdc.c @@ -459,7 +459,10 @@ static int stm32_ltdc_bind(struct udevice *dev) uc_plat->size = CONFIG_VIDEO_STM32_MAX_XRES * CONFIG_VIDEO_STM32_MAX_YRES * (CONFIG_VIDEO_STM32_MAX_BPP >> 3); - dev_dbg(dev, "frame buffer max size %d bytes\n", uc_plat->size); + /* align framebuffer on kernel MMU_SECTION_SIZE = max 2MB for LPAE */ + uc_plat->align = SZ_2M; + dev_dbg(dev, "frame buffer max size %d bytes align %x\n", + uc_plat->size, uc_plat->align); return 0; } diff --git a/drivers/video/u_boot_logo.bmp b/drivers/video/u_boot_logo.bmp Binary files differnew file mode 100644 index 0000000..47f1e9b --- /dev/null +++ b/drivers/video/u_boot_logo.bmp diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 9f8cf6e..7d499bc 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -228,6 +228,20 @@ void video_sync_all(void) } } +bool video_is_active(void) +{ + struct udevice *dev; + + for (uclass_find_first_device(UCLASS_VIDEO, &dev); + dev; + uclass_find_next_device(&dev)) { + if (device_active(dev)) + return true; + } + + return false; +} + int video_get_xsize(struct udevice *dev) { struct video_priv *priv = dev_get_uclass_priv(dev); @@ -265,10 +279,10 @@ int video_sync_copy(struct udevice *dev, void *from, void *to) */ if (offset < -priv->fb_size || offset > 2 * priv->fb_size) { #ifdef DEBUG - char str[80]; + char str[120]; snprintf(str, sizeof(str), - "[sync_copy fb=%p, from=%p, to=%p, offset=%lx]", + "[** FAULT sync_copy fb=%p, from=%p, to=%p, offset=%lx]", priv->fb, from, to, offset); console_puts_select_stderr(true, str); #endif @@ -305,23 +319,20 @@ int video_sync_copy_all(struct udevice *dev) #endif -/* Set up the colour map */ -static int video_pre_probe(struct udevice *dev) -{ - struct video_priv *priv = dev_get_uclass_priv(dev); +#define SPLASH_DECL(_name) \ + extern u8 __splash_ ## _name ## _begin[]; \ + extern u8 __splash_ ## _name ## _end[] - priv->cmap = calloc(256, sizeof(ushort)); - if (!priv->cmap) - return -ENOMEM; +#define SPLASH_START(_name) __splash_ ## _name ## _begin - return 0; -} +SPLASH_DECL(u_boot_logo); -static int video_pre_remove(struct udevice *dev) +static int show_splash(struct udevice *dev) { - struct video_priv *priv = dev_get_uclass_priv(dev); + u8 *data = SPLASH_START(u_boot_logo); + int ret; - free(priv->cmap); + ret = video_bmp_display(dev, map_to_sysmem(data), -4, 4, true); return 0; } @@ -391,6 +402,14 @@ static int video_post_probe(struct udevice *dev) return ret; } + if (IS_ENABLED(CONFIG_VIDEO_LOGO) && !plat->hide_logo) { + ret = show_splash(dev); + if (ret) { + log_debug("Cannot show splash screen\n"); + return ret; + } + } + return 0; }; @@ -433,9 +452,7 @@ UCLASS_DRIVER(video) = { .name = "video", .flags = DM_UC_FLAG_SEQ_ALIAS, .post_bind = video_post_bind, - .pre_probe = video_pre_probe, .post_probe = video_post_probe, - .pre_remove = video_pre_remove, .priv_auto = sizeof(struct video_uc_priv), .per_device_auto = sizeof(struct video_priv), .per_device_plat_auto = sizeof(struct video_uc_plat), diff --git a/drivers/video/video_bmp.c b/drivers/video/video_bmp.c index 1e6f07f..e8600b2 100644 --- a/drivers/video/video_bmp.c +++ b/drivers/video/video_bmp.c @@ -13,34 +13,90 @@ #include <watchdog.h> #include <asm/unaligned.h> -#ifdef CONFIG_VIDEO_BMP_RLE8 #define BMP_RLE8_ESCAPE 0 #define BMP_RLE8_EOL 0 #define BMP_RLE8_EOBMP 1 #define BMP_RLE8_DELTA 2 -static void draw_unencoded_bitmap(ushort **fbp, uchar *bmap, ushort *cmap, +/** + * get_bmp_col_16bpp() - Convert a colour-table entry into a 16bpp pixel value + * + * @return value to write to the 16bpp frame buffer for this palette entry + */ +static uint get_bmp_col_16bpp(struct bmp_color_table_entry cte) +{ + return ((cte.red << 8) & 0xf800) | + ((cte.green << 3) & 0x07e0) | + ((cte.blue >> 3) & 0x001f); +} + +/** + * write_pix8() - Write a pixel from a BMP image into the framebuffer + * + * This handles frame buffers with 8, 16, 24 or 32 bits per pixel + * + * @fb: Place in frame buffer to update + * @bpix: Frame buffer bits-per-pixel, which controls how many bytes are written + * @palette: BMP palette table + * @bmap: Pointer to BMP bitmap position to write. This contains a single byte + * which is either written directly (bpix == 8) or used to look up the + * palette to get a colour to write + */ +static void write_pix8(u8 *fb, uint bpix, struct bmp_color_table_entry *palette, + u8 *bmap) +{ + if (bpix == 8) { + *fb++ = *bmap; + } else if (bpix == 16) { + *(u16 *)fb = get_bmp_col_16bpp(palette[*bmap]); + } else { + /* Only support big endian */ + struct bmp_color_table_entry *cte = &palette[*bmap]; + + if (bpix == 24) { + *fb++ = cte->red; + *fb++ = cte->green; + *fb++ = cte->blue; + } else { + *fb++ = cte->blue; + *fb++ = cte->green; + *fb++ = cte->red; + *fb++ = 0; + } + } +} + +static void draw_unencoded_bitmap(u8 **fbp, uint bpix, uchar *bmap, + struct bmp_color_table_entry *palette, int cnt) { + u8 *fb = *fbp; + while (cnt > 0) { - *(*fbp)++ = cmap[*bmap++]; + write_pix8(fb, bpix, palette, bmap++); + fb += bpix / 8; cnt--; } + *fbp = fb; } -static void draw_encoded_bitmap(ushort **fbp, ushort col, int cnt) +static void draw_encoded_bitmap(u8 **fbp, uint bpix, + struct bmp_color_table_entry *palette, u8 *bmap, + int cnt) { - ushort *fb = *fbp; + u8 *fb = *fbp; while (cnt > 0) { - *fb++ = col; + write_pix8(fb, bpix, palette, bmap); + fb += bpix / 8; cnt--; } *fbp = fb; } static void video_display_rle8_bitmap(struct udevice *dev, - struct bmp_image *bmp, ushort *cmap, + struct bmp_image *bmp, uint bpix, + struct bmp_color_table_entry *palette, uchar *fb, int x_off, int y_off, ulong width, ulong height) { @@ -49,6 +105,7 @@ static void video_display_rle8_bitmap(struct udevice *dev, ulong cnt, runlen; int x, y; int decode = 1; + uint bytes_per_pixel = bpix / 8; debug("%s\n", __func__); bmap = (uchar *)bmp + get_unaligned_le32(&bmp->header.data_offset); @@ -64,8 +121,8 @@ static void video_display_rle8_bitmap(struct udevice *dev, bmap += 2; x = 0; y--; - /* 16bpix, 2-byte per pixel, width should *2 */ - fb -= (width * 2 + priv->line_length); + fb -= width * bytes_per_pixel + + priv->line_length; break; case BMP_RLE8_EOBMP: /* end of bitmap */ @@ -75,9 +132,9 @@ static void video_display_rle8_bitmap(struct udevice *dev, /* delta run */ x += bmap[2]; y -= bmap[3]; - /* 16bpix, 2-byte per pixel, x should *2 */ - fb = (uchar *)(priv->fb + (y + y_off - 1) - * priv->line_length + (x + x_off) * 2); + fb = (uchar *)(priv->fb + + (y + y_off - 1) * priv->line_length + + (x + x_off) * bytes_per_pixel); bmap += 4; break; default: @@ -91,8 +148,8 @@ static void video_display_rle8_bitmap(struct udevice *dev, else cnt = runlen; draw_unencoded_bitmap( - (ushort **)&fb, - bmap, cmap, cnt); + &fb, bpix, + bmap, palette, cnt); } x += runlen; } @@ -116,8 +173,8 @@ static void video_display_rle8_bitmap(struct udevice *dev, cnt = width - x; else cnt = runlen; - draw_encoded_bitmap((ushort **)&fb, - cmap[bmap[1]], cnt); + draw_encoded_bitmap(&fb, bpix, palette, + &bmap[1], cnt); } x += runlen; } @@ -125,20 +182,6 @@ static void video_display_rle8_bitmap(struct udevice *dev, } } } -#endif - -__weak void fb_put_byte(uchar **fb, uchar **from) -{ - *(*fb)++ = *(*from)++; -} - -#if defined(CONFIG_BMP_16BPP) -__weak void fb_put_word(uchar **fb, uchar **from) -{ - *(*fb)++ = *(*from)++; - *(*fb)++ = *(*from)++; -} -#endif /* CONFIG_BMP_16BPP */ /** * video_splash_align_axis() - Align a single coordinate @@ -169,28 +212,10 @@ static void video_splash_align_axis(int *axis, unsigned long panel_size, *axis = max(0, (int)axis_alignment); } -static void video_set_cmap(struct udevice *dev, - struct bmp_color_table_entry *cte, unsigned colours) -{ - struct video_priv *priv = dev_get_uclass_priv(dev); - int i; - ushort *cmap = priv->cmap; - - debug("%s: colours=%d\n", __func__, colours); - for (i = 0; i < colours; ++i) { - *cmap = ((cte->red << 8) & 0xf800) | - ((cte->green << 3) & 0x07e0) | - ((cte->blue >> 3) & 0x001f); - cmap++; - cte++; - } -} - int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, bool align) { struct video_priv *priv = dev_get_uclass_priv(dev); - ushort *cmap_base = NULL; int i, j; uchar *start, *fb; struct bmp_image *bmp = map_sysmem(bmp_image, 0); @@ -246,9 +271,6 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, debug("Display-bmp: %d x %d with %d colours, display %d\n", (int)width, (int)height, (int)colours, 1 << bpix); - if (bmp_bpix == 8) - video_set_cmap(dev, palette, colours); - padded_width = (width & 0x3 ? (width & ~0x3) + 4 : width); if (align) { @@ -270,23 +292,19 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, switch (bmp_bpix) { case 1: - case 8: { - struct bmp_color_table_entry *cte; - cmap_base = priv->cmap; -#ifdef CONFIG_VIDEO_BMP_RLE8 - u32 compression = get_unaligned_le32(&bmp->header.compression); - debug("compressed %d %d\n", compression, BMP_BI_RLE8); - if (compression == BMP_BI_RLE8) { - if (bpix != 16) { - /* TODO implement render code for bpix != 16 */ - printf("Error: only support 16 bpix"); - return -EPROTONOSUPPORT; + case 8: + if (IS_ENABLED(CONFIG_VIDEO_BMP_RLE8)) { + u32 compression = get_unaligned_le32( + &bmp->header.compression); + debug("compressed %d %d\n", compression, BMP_BI_RLE8); + if (compression == BMP_BI_RLE8) { + video_display_rle8_bitmap(dev, bmp, bpix, palette, fb, + x, y, width, height); + break; } - video_display_rle8_bitmap(dev, bmp, cmap_base, fb, x, - y, width, height); - break; } -#endif + + /* Not compressed */ byte_width = width * (bpix / 8); if (!byte_width) byte_width = width; @@ -294,81 +312,64 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, for (i = 0; i < height; ++i) { WATCHDOG_RESET(); for (j = 0; j < width; j++) { - if (bpix == 8) { - fb_put_byte(&fb, &bmap); - } else if (bpix == 16) { - *(uint16_t *)fb = cmap_base[*bmap]; - bmap++; - fb += sizeof(uint16_t) / sizeof(*fb); - } else { - /* Only support big endian */ - cte = &palette[*bmap]; - bmap++; - if (bpix == 24) { - *(fb++) = cte->red; - *(fb++) = cte->green; - *(fb++) = cte->blue; - } else { - *(fb++) = cte->blue; - *(fb++) = cte->green; - *(fb++) = cte->red; - *(fb++) = 0; - } - } + write_pix8(fb, bpix, palette, bmap); + bmap++; + fb += bpix / 8; } bmap += (padded_width - width); fb -= byte_width + priv->line_length; } break; - } -#if defined(CONFIG_BMP_16BPP) case 16: - for (i = 0; i < height; ++i) { - WATCHDOG_RESET(); - for (j = 0; j < width; j++) - fb_put_word(&fb, &bmap); - - bmap += (padded_width - width); - fb -= width * 2 + priv->line_length; + if (IS_ENABLED(CONFIG_BMP_16BPP)) { + for (i = 0; i < height; ++i) { + WATCHDOG_RESET(); + for (j = 0; j < width; j++) { + *fb++ = *bmap++; + *fb++ = *bmap++; + } + bmap += (padded_width - width); + fb -= width * 2 + priv->line_length; + } } break; -#endif /* CONFIG_BMP_16BPP */ -#if defined(CONFIG_BMP_24BPP) case 24: - for (i = 0; i < height; ++i) { - for (j = 0; j < width; j++) { - if (bpix == 16) { - /* 16bit 555RGB format */ - *(u16 *)fb = ((bmap[2] >> 3) << 10) | - ((bmap[1] >> 3) << 5) | - (bmap[0] >> 3); - bmap += 3; - fb += 2; - } else { - *(fb++) = *(bmap++); - *(fb++) = *(bmap++); - *(fb++) = *(bmap++); - *(fb++) = 0; + if (IS_ENABLED(CONFIG_BMP_24BPP)) { + for (i = 0; i < height; ++i) { + for (j = 0; j < width; j++) { + if (bpix == 16) { + /* 16bit 565RGB format */ + *(u16 *)fb = ((bmap[2] >> 3) + << 11) | + ((bmap[1] >> 2) << 5) | + (bmap[0] >> 3); + bmap += 3; + fb += 2; + } else { + *fb++ = *bmap++; + *fb++ = *bmap++; + *fb++ = *bmap++; + *fb++ = 0; + } } + fb -= priv->line_length + width * (bpix / 8); + bmap += (padded_width - width); } - fb -= priv->line_length + width * (bpix / 8); - bmap += (padded_width - width); } break; -#endif /* CONFIG_BMP_24BPP */ -#if defined(CONFIG_BMP_32BPP) case 32: - for (i = 0; i < height; ++i) { - for (j = 0; j < width; j++) { - *(fb++) = *(bmap++); - *(fb++) = *(bmap++); - *(fb++) = *(bmap++); - *(fb++) = *(bmap++); + if (IS_ENABLED(CONFIG_BMP_32BPP)) { + for (i = 0; i < height; ++i) { + for (j = 0; j < width; j++) { + *fb++ = *bmap++; + *fb++ = *bmap++; + *fb++ = *bmap++; + *fb++ = *bmap++; + } + fb -= priv->line_length + width * (bpix / 8); } - fb -= priv->line_length + width * (bpix / 8); } break; -#endif /* CONFIG_BMP_32BPP */ default: break; }; diff --git a/dts/Kconfig b/dts/Kconfig index b7c4a2f..fb7df53 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -16,24 +16,6 @@ config BINMAN bool select DTOC -config BINMAN_STANDALONE_FDT - bool - depends on BINMAN - default y if OF_BOARD - help - This option tells U-Boot build system that a standalone device tree - source is explicitly required when using binman to package U-Boot. - - This is not necessary in a common scenario where a device tree source - that contains the binman node is provided in the arch/<arch>/dts - directory for a specific board. Such device tree sources are built for - OF_SEPARATE or OF_EMBED. However for a scenario like the board device - tree blob is not provided in the U-Boot build tree, but fed to U-Boot - in the runtime, e.g.: in the OF_BOARD case that it is passed by - a prior stage bootloader. For such scenario, a standalone device tree - blob containing binman node to describe how to package U-Boot should - be provided explicitly. - menu "Device Tree Control" depends on SUPPORT_OF_CONTROL @@ -97,11 +79,9 @@ config OF_LIVE choice prompt "Provider of DTB for DT control" depends on OF_CONTROL - default OF_BOARD if SANDBOX config OF_SEPARATE bool "Separate DTB for DT control" - depends on !SANDBOX help If this option is enabled, the device tree will be built and placed as a separate u-boot.dtb file alongside the U-Boot image. @@ -114,14 +94,50 @@ config OF_EMBED and development only and is not recommended for production devices. Boards in the mainline U-Boot tree should not use it. +endchoice + config OF_BOARD bool "Provided by the board (e.g a previous loader) at runtime" + default y if SANDBOX || OF_HAS_PRIOR_STAGE help - If this option is enabled, the device tree will be provided by - the board at runtime if the board supports it, instead of being - bundled with the image. + If this option is enabled, the device tree is provided at runtime by + a custom function called board_fdt_blob_setup(). The board must + implement this function if it wishes to provide special behaviour. -endchoice + With this option, the device tree build by U-Boot may be overridden or + ignored. See OF_HAS_PRIOR_STAGE. + + Note: Boards which use this to handle a device tree passed from an + earlier stage should enable OF_HAS_PRIOR_STAGE. + +config OF_HAS_PRIOR_STAGE + bool + help + Indicates that a prior stage of the firmware (before U-Boot proper) + makes use of device tree and this board normally boots with that prior + stage, that provides a devicetree to U-Boot. + + This means that the device tree built in U-Boot should not be packaged + in the firmware image. Instead, the prior stage's device tree should + be so packaged. At runtime, the prior stage reads this, does any + necessary fix-ups, then passes it to U-Boot. See OF_BOARD. + + This option does not preclude using the U-Boot device tree, e.g. for + development purposes, but it is not recommended, and likely will not + even work, for production systems. + + Note: This option must be set in Kconfig and cannot be enabled or + disabled in the board's defconfig file. + +config OF_OMIT_DTB + bool "Omit the device tree output when building" + default y if OF_HAS_PRIOR_STAGE && !BINMAN + help + As a special case, avoid writing a device tree file u-boot.dtb when + building. Also don't include that file in u-boot.bin + + This is used for boards which normally provide a devicetree via a + runtime mechanism (such as OF_BOARD), to avoid confusion. config DEFAULT_DEVICE_TREE string "Default Device Tree for DT control" @@ -194,7 +210,6 @@ endchoice config MULTI_DTB_FIT_UNCOMPRESS_SZ hex "Size of memory reserved to uncompress the DTBs" - depends on (MULTI_DTB_FIT_GZIP || MULTI_DTB_FIT_LZO) default 0x8000 help This is the size of this area where the DTBs are uncompressed. diff --git a/env/Kconfig b/env/Kconfig index 06d72ba..6dc8d8d 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -3,6 +3,24 @@ menu "Environment" config ENV_SUPPORT def_bool y +config ENV_SOURCE_FILE + string "Environment file to use" + default "" + help + This sets the basename to use to generate the default environment. + This a text file as described in doc/usage/environment.rst + + The file must be in the board directory and have a .env extension, so + the resulting filename is typically + board/<vendor>/<board>/<CONFIG_ENV_SOURCE_FILE>.env + + If the file is not present, an error is produced. + + If this CONFIG is empty, U-Boot uses CONFIG SYS_BOARD as a default, if + the file board/<vendor>/<board>/<SYS_BOARD>.env exists. Otherwise the + environment is assumed to come from the ad-hoc + CONFIG_EXTRA_ENV_SETTINGS #define + config SAVEENV def_bool y if CMD_SAVEENV @@ -339,54 +357,31 @@ config ENV_SECT_SIZE_AUTO different sector sizes, and CONFIG_ENV_SECT_SIZE should be set to that value. -config USE_ENV_SPI_BUS - bool "SPI flash bus for environment" - depends on ENV_IS_IN_SPI_FLASH - help - Force the SPI bus for environment. - If not defined, use CONFIG_SF_DEFAULT_BUS. - config ENV_SPI_BUS int "Value of SPI flash bus for environment" - depends on USE_ENV_SPI_BUS - help - Value the SPI bus and chip select for environment. - -config USE_ENV_SPI_CS - bool "SPI flash chip select for environment" depends on ENV_IS_IN_SPI_FLASH + default SF_DEFAULT_BUS help - Force the SPI chip select for environment. - If not defined, use CONFIG_SF_DEFAULT_CS. + Value the SPI bus and chip select for environment. config ENV_SPI_CS int "Value of SPI flash chip select for environment" - depends on USE_ENV_SPI_CS - help - Value of the SPI chip select for environment. - -config USE_ENV_SPI_MAX_HZ - bool "SPI flash max frequency for environment" depends on ENV_IS_IN_SPI_FLASH + default SF_DEFAULT_CS help - Force the SPI max work clock for environment. - If not defined, use CONFIG_SF_DEFAULT_SPEED. + Value of the SPI chip select for environment. config ENV_SPI_MAX_HZ int "Value of SPI flash max frequency for environment" - depends on USE_ENV_SPI_MAX_HZ - help - Value of the SPI max work clock for environment. - -config USE_ENV_SPI_MODE - bool "SPI flash mode for environment" depends on ENV_IS_IN_SPI_FLASH + default SF_DEFAULT_SPEED help - Force the SPI work mode for environment. + Value of the SPI max work clock for environment. config ENV_SPI_MODE hex "Value of SPI flash work mode for environment" - depends on USE_ENV_SPI_MODE + depends on ENV_IS_IN_SPI_FLASH + default SF_DEFAULT_MODE help Value of the SPI work mode for environment. See include/spi.h for value. diff --git a/env/common.c b/env/common.c index 208e2ad..ee957c0 100644 --- a/env/common.c +++ b/env/common.c @@ -235,6 +235,11 @@ int env_get_yesno(const char *var) 1 : 0; } +bool env_get_autostart(void) +{ + return env_get_yesno("autostart") == 1; +} + /* * Look up the variable from the default environment */ diff --git a/env/embedded.c b/env/embedded.c index 208553e..9f26e6c 100644 --- a/env/embedded.c +++ b/env/embedded.c @@ -66,6 +66,7 @@ #endif #define DEFAULT_ENV_INSTANCE_EMBEDDED +#include <config.h> #include <env_default.h> #ifdef CONFIG_ENV_ADDR_REDUND diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig index 1b9ecdd..0e79c34 100644 --- a/fs/jffs2/Kconfig +++ b/fs/jffs2/Kconfig @@ -5,3 +5,15 @@ config FS_JFFS2 Flash File System version 2). JFFS2 is a log-structured file system for use with flash memory devices. It supports raw NAND devices, hard links and compression. + +config JFFS2_LZO + bool "Enable LZO compression in JFFS2" + depends on FS_JFFS2 + help + Enable LZO compression in the JFFS2 filesystem + +config JFFS2_NAND + bool "Enable JFFS2 support for NAND flash" + depends on FS_JFFS2 + help + Enable support for NAND flash as the backing store for JFFS2. diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 16fd305..104282b 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -244,6 +244,10 @@ struct global_data { * @fdt_size: space reserved for relocated device space */ unsigned long fdt_size; + /** + * @fdt_src: Source of FDT + */ + enum fdt_source_t fdt_src; #if CONFIG_IS_ENABLED(OF_LIVE) /** * @of_root: root node of the live tree @@ -512,6 +516,14 @@ static_assert(sizeof(struct global_data) == GD_SIZE); #define gd_acpi_ctx() NULL #endif +#if CONFIG_IS_ENABLED(MULTI_DTB_FIT) +#define gd_multi_dtb_fit() gd->multi_dtb_fit +#define gd_set_multi_dtb_fit(_dtb) gd->multi_dtb_fit = _dtb +#else +#define gd_multi_dtb_fit() NULL +#define gd_set_multi_dtb_fit(_dtb) +#endif + /** * enum gd_flags - global data flags * diff --git a/include/clock_legacy.h b/include/clock_legacy.h index 29261b6..efa4831 100644 --- a/include/clock_legacy.h +++ b/include/clock_legacy.h @@ -22,4 +22,15 @@ unsigned long get_board_ddr_clk(void); #define get_board_ddr_clk() CONFIG_DDR_CLK_FREQ #endif +/* + * If we have CONFIG_DYNAMIC_SYS_CLK_FREQ then there will be an + * implentation of get_board_sys_clk() somewhere. Otherwise we have + * a static value to use now. + */ +#ifdef CONFIG_DYNAMIC_SYS_CLK_FREQ +unsigned long get_board_sys_clk(void); +#else +#define get_board_sys_clk() CONFIG_SYS_CLK_FREQ +#endif + #endif diff --git a/include/command.h b/include/command.h index 137cfbc..f8e07a5 100644 --- a/include/command.h +++ b/include/command.h @@ -45,7 +45,7 @@ struct cmd_tbl { char *const argv[]); char *usage; /* Usage message (short) */ #ifdef CONFIG_SYS_LONGHELP - char *help; /* Help message (long) */ + const char *help; /* Help message (long) */ #endif #ifdef CONFIG_AUTO_COMPLETE /* do auto completion on the arguments */ diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 3f724aa..2f90929 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -498,8 +498,4 @@ "run bootcmd_${target}; " \ "done\0" -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "run distro_bootcmd" -#endif - #endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 6a69ac4..5ed624c 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -15,7 +15,6 @@ */ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 #ifdef CONFIG_MCFFEC @@ -39,7 +38,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 7421f3b..90f1664 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* @@ -48,7 +47,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (gpio->par_qspi) #define CONFIG_SYS_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) #define CONFIG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 7ee0ec6..00892ec 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -21,8 +21,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG - #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ /* diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index e9a7922..c5d8aa3 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -12,8 +12,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG /* disable watchdog */ - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -69,7 +67,6 @@ #define CONFIG_HOSTNAME "M5253DEMO" /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C)) #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) #define CONFIG_SYS_I2C_PINMUX_SET (0) diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 1204aa0..e814a29 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ @@ -146,26 +145,6 @@ CF_CACR_EUSP) /*----------------------------------------------------------------------- - * Memory bank definitions - */ -#define CONFIG_SYS_BR0_PRELIM 0xFFE00201 -#define CONFIG_SYS_OR0_PRELIM 0xFFE00014 -#define CONFIG_SYS_BR1_PRELIM 0 -#define CONFIG_SYS_OR1_PRELIM 0 -#define CONFIG_SYS_BR2_PRELIM 0x30000001 -#define CONFIG_SYS_OR2_PRELIM 0xFFF80000 -#define CONFIG_SYS_BR3_PRELIM 0 -#define CONFIG_SYS_OR3_PRELIM 0 -#define CONFIG_SYS_BR4_PRELIM 0 -#define CONFIG_SYS_OR4_PRELIM 0 -#define CONFIG_SYS_BR5_PRELIM 0 -#define CONFIG_SYS_OR5_PRELIM 0 -#define CONFIG_SYS_BR6_PRELIM 0 -#define CONFIG_SYS_OR6_PRELIM 0 -#define CONFIG_SYS_BR7_PRELIM 0x00000701 -#define CONFIG_SYS_OR7_PRELIM 0xFFC0007C - -/*----------------------------------------------------------------------- * Port configuration */ #define CONFIG_SYS_PACNT 0x00000000 diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 8e03fc9..b18f031 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -58,13 +58,10 @@ #endif /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) -#define CONFIG_BOOTCOMMAND "bootm ffe40000" - #ifdef CONFIG_MCFFEC # define CONFIG_NET_RETRY_COUNT 5 # define CONFIG_OVERWRITE_ETHADDR_ONCE diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 7b33677..5db189a 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 #define CONFIG_SYS_UNIFY_CACHE @@ -54,7 +53,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 19d8cfe..f96f54e 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ #define CONFIG_SYS_UNIFY_CACHE @@ -48,7 +47,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM @@ -137,10 +135,6 @@ # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index e2ddc48..b790601 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */ #define CONFIG_SYS_UNIFY_CACHE @@ -50,7 +49,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM @@ -139,10 +137,6 @@ # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 72119a1..9a34e54 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -302,8 +302,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR @@ -326,7 +324,6 @@ */ #define CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_NETDEV "eth1" @@ -365,20 +362,4 @@ "$netdev:off " \ "root=$rootdev rw console=$console,$baudrate $othbootargs\0" -#define NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setbootargs;" \ - "run setipargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv rootdev /dev/ram;" \ - "run setbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index fe156e7..84e05ea 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -26,8 +26,6 @@ #define CONFIG_HAS_FEC 1 /* 8540 has FEC */ #endif -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - /* * sysclk for MPC85xx * @@ -46,10 +44,6 @@ * Note that PCI-X won't work at 33MHz. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33000000 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -90,9 +84,7 @@ #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ -#define CONFIG_SYS_BR0_PRELIM 0xff001801 /* port size 32bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Flash */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM @@ -131,8 +123,6 @@ * FIXME: the top 17 bits of BR2. */ -#define CONFIG_SYS_BR2_PRELIM 0xf0001861 - /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * @@ -147,8 +137,6 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 - #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -176,8 +164,6 @@ /* * 32KB, 8-bit wide for ADS config reg */ -#define CONFIG_SYS_BR4_PRELIM 0xf8000801 -#define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) #define CONFIG_SYS_INIT_RAM_LOCK 1 @@ -274,8 +260,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -317,23 +301,4 @@ "fdtaddr=400000\0" \ "fdtfile=your.fdt.dtb\0" -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND NFSBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 5c54bad..f583aa8 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -19,15 +19,12 @@ #define CONFIG_PCI1 /* PCI controller 1 */ #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #undef CONFIG_PCI2 -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ #ifndef __ASSEMBLY__ #include <linux/stringify.h> -extern unsigned long get_clock_freq(void); #endif -#define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */ /* * These can be toggled for performance analysis, otherwise use default. @@ -134,14 +131,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_BR0_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x800000) | BR_PS_16 | BR_V) -#define CONFIG_SYS_BR1_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) - -#define CONFIG_SYS_OR0_PRELIM 0xff806e65 -#define CONFIG_SYS_OR1_PRELIM 0xff806e65 - #define CONFIG_SYS_FLASH_BANKS_LIST \ {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS} #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ @@ -185,10 +174,6 @@ extern unsigned long get_clock_freq(void); * FIXME: the top 17 bits of BR2. */ -#define CONFIG_SYS_BR2_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \ - | BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V) - /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * @@ -203,8 +188,6 @@ extern unsigned long get_clock_freq(void); * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 - #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -263,9 +246,6 @@ extern unsigned long get_clock_freq(void); #else #define CADMUS_BASE_ADDR_PHYS CADMUS_BASE_ADDR #endif -#define CONFIG_SYS_BR3_PRELIM \ - (BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xfff00ff7 #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ @@ -401,8 +381,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -457,23 +435,4 @@ extern unsigned long get_clock_freq(void); "fdtaddr=1e00000\0" \ "fdtfile=mpc8548cds.dtb\0" -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND NFSBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index dcd538f..b8a72d0 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -27,7 +27,6 @@ * assume U-Boot is less than 0.5MB */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* @@ -44,10 +43,6 @@ * in the README.mpc85xxads. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33000000 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -90,9 +85,7 @@ #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ -#define CONFIG_SYS_BR0_PRELIM 0xff001801 /* port size 32bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Flash */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM @@ -131,8 +124,6 @@ * FIXME: the top 17 bits of BR2. */ -#define CONFIG_SYS_BR2_PRELIM 0xf0001861 - /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * @@ -147,8 +138,6 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 - #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -176,8 +165,6 @@ /* * 32KB, 8-bit wide for ADS config reg */ -#define CONFIG_SYS_BR4_PRELIM 0xf8000801 -#define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) #define CONFIG_SYS_INIT_RAM_LOCK 1 @@ -261,8 +248,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -305,23 +290,4 @@ "fdtaddr=400000\0" \ "fdtfile=mpc8560ads.dtb\0" -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND NFSBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 1841eff..6a9c86c 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -63,19 +63,16 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 #else #ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_TPL_TEXT_BASE 0xD0001000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_NAND_MINIMAL @@ -84,7 +81,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) #endif #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_TPL_PAD_TO 0x20000 @@ -102,7 +98,7 @@ #endif #ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE 0xD0001000 #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else @@ -110,12 +106,10 @@ #endif /* High Level Configuration Options */ -#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ #if defined(CONFIG_PCI) #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* * PCI Windows @@ -152,8 +146,6 @@ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif -#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. @@ -573,7 +565,6 @@ extern unsigned long get_sdram_size(void); #if defined(CONFIG_HAS_FSL_DR_USB) #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL #endif #endif @@ -597,8 +588,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ - #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \ || defined(CONFIG_FSL_SATA) #endif @@ -681,16 +670,6 @@ extern unsigned long get_sdram_size(void); "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" #endif -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND RAMBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index bf8a92c..8ada25d 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -36,7 +36,6 @@ #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ @@ -50,10 +49,8 @@ #endif #ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(unsigned long dummy); #include <linux/stringify.h> #endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* * These can be toggled for performance analysis, otherwise use default. @@ -137,9 +134,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CPLD_BASE_PHYS CPLD_BASE #endif -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ - #define PIXIS_LBMAP_SWITCH 7 #define PIXIS_LBMAP_MASK 0xf0 #define PIXIS_LBMAP_SHIFT 4 @@ -185,21 +179,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ #endif /* CONFIG_NAND_FSL_ELBC */ #define CONFIG_SYS_FLASH_EMPTY_INFO @@ -413,7 +392,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif @@ -464,32 +442,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); "fdtfile=p2041rdb/p2041rdb.dtb\0" \ "bdev=sda3\0" -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND HDBOOT - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index bf9f26e..dbaffc6 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -6,25 +6,16 @@ #ifndef _CONFIG_SBX81LIFKW_H #define _CONFIG_SBX81LIFKW_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_GPIO 1 /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK @@ -61,7 +52,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 71394ae..bbd3ccc 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -6,25 +6,16 @@ #ifndef _CONFIG_SBX81LIFXCAT_H #define _CONFIG_SBX81LIFXCAT_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_GPIO 1 /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK @@ -66,7 +57,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 89bbeb7..bf26662 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -116,12 +115,6 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -380,7 +373,6 @@ unsigned long get_board_sys_clk(void); #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS /* @@ -416,7 +408,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #ifdef CONFIG_PCI /* controller 1, direct to uli, tgtid 3, Base address 20000 */ @@ -452,7 +443,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif @@ -580,25 +570,6 @@ unsigned long get_board_sys_clk(void); "fdtaddr=1e00000\0" \ "bdev=sda3\0" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __T1024RDB_H */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 48fc8a2..a1650f5 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -40,7 +40,6 @@ #endif #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -85,8 +84,6 @@ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - #if defined(CONFIG_SPIFLASH) #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_NXP_ESBC @@ -95,8 +92,6 @@ #endif #endif -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -367,7 +362,6 @@ #ifdef CONFIG_FSL_DIU_FB #define CONFIG_FSL_DIU_CH7301 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif #endif @@ -460,7 +454,6 @@ #ifdef CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif #endif @@ -499,8 +492,6 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#define CONFIG_U_QE - #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ @@ -609,40 +600,6 @@ "fdtfile=" __stringify(FDTFILE) "\0" \ "bdev=sda3\0" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 78562bc..aaea314 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -94,12 +93,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - /* * Config the L3 Cache as L3 SRAM */ @@ -360,12 +353,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "t208xqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T208xQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -420,7 +407,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull @@ -517,7 +503,6 @@ unsigned long get_board_sys_clk(void); * USB */ #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB #endif @@ -614,40 +599,6 @@ unsigned long get_board_sys_clk(void); "cpu 7 release 0x01000000 - - -;" \ "go 0x01000000" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __T208xQDS_H */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 471ed94..467f634 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -89,12 +88,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 66660000 - /* * Config the L3 Cache as L3 SRAM */ @@ -312,12 +305,6 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_VOL_MONITOR 0xa -#define CONFIG_VID_FLS_ENV "t208xrdb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T208xRDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -372,7 +359,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull @@ -472,7 +458,6 @@ unsigned long get_board_sys_clk(void); * USB */ #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB #endif @@ -567,40 +552,6 @@ unsigned long get_board_sys_clk(void); "cpu 7 release 0x01000000 - - -;" \ "go 0x01000000" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __T2080RDB_H */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index f6ccaf4..2d63249 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -60,7 +60,6 @@ #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* * These can be toggled for performance analysis, otherwise use default. @@ -225,12 +224,6 @@ "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define CONFIG_SYS_CLK_FREQ 66666666 - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - /* * DDR Setup */ @@ -408,12 +401,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T4240RDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -498,7 +485,6 @@ unsigned long get_board_sys_clk(void); /* * USB */ -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB @@ -547,40 +533,6 @@ unsigned long get_board_sys_clk(void); "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index 973033d..58e8526 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -17,8 +17,6 @@ #define CONFIG_SKIP_TRUNOFF_WATCHDOG -#define CONFIG_ARCH_MAP_SYSMEM - #define CONFIG_BOOTP_SERVERIP #ifdef CONFIG_SKIP_LOWLEVEL_INIT @@ -30,8 +28,7 @@ /* * Timer */ -#define CONFIG_SYS_CLK_FREQ 39062500 -#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ +#define VERSION_CLOCK get_board_sys_clk() /* * Use Externel CLOCK or PCLK diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index f533ada..1022764 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -15,8 +15,6 @@ */ #define CONFIG_USE_INTERRUPT -#define CONFIG_ARCH_MAP_SYSMEM - #define CONFIG_BOOTP_SERVERIP #ifndef CONFIG_SKIP_LOWLEVEL_INIT @@ -32,8 +30,7 @@ /* * Timer */ -#define CONFIG_SYS_CLK_FREQ 39062500 -#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ +#define VERSION_CLOCK get_board_sys_clk() /* * Use Externel CLOCK or PCLK diff --git a/include/configs/alt.h b/include/configs/alt.h index 8456a6b..37b5800 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -34,8 +34,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h index 339a975..2cf77a6 100644 --- a/include/configs/am335x_igep003x.h +++ b/include/configs/am335x_igep003x.h @@ -91,12 +91,6 @@ "echo WARNING: Could not determine device tree to use; fi; \0" #endif -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "run mmcboot;" \ - "run nandboot;" \ - "run netboot;" - /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 584b025..c7a7a18 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -139,64 +139,15 @@ #if defined CONFIG_SHC_NETBOOT /* Network Boot */ -# define CONFIG_BOOTCOMMAND \ - "run fusecmd; " \ - "if run netboot; then " \ - "echo Booting from network; " \ - "else " \ - "echo ERROR: Cannot boot from network!; " \ - "panic; " \ - "fi; " #elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */ /* SD-Card Boot */ -# define CONFIG_BOOTCOMMAND \ - "if mmc dev 0; mmc rescan; then " \ - "run sd_setup; " \ - "else " \ - "echo ERROR: SD/MMC-Card not detected!; " \ - "panic; " \ - "fi; " \ - "if run loaduimage; then " \ - "echo Bootable SD/MMC-Card inserted, booting from it!; " \ - "run mmcboot; " \ - "else " \ - "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \ - "panic; " \ - "fi; " #elif defined CONFIG_SHC_ICT /* ICT adapter boots only u-boot and does HW partitioning */ -# define CONFIG_BOOTCOMMAND \ - "if mmc dev 0; mmc rescan; then " \ - "run sd_setup; " \ - "else " \ - "echo ERROR: SD/MMC-Card not detected!; " \ - "panic; " \ - "fi; " \ - "run fusecmd; " #else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */ /* Regular Boot from internal eMMC */ -# define CONFIG_BOOTCOMMAND \ - "if mmc dev 1; mmc rescan; then " \ - "run emmc_setup; " \ - "else " \ - "echo ERROR: eMMC device not detected!; " \ - "panic; " \ - "fi; " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else " \ - "echo ERROR Unable to load uImage from eMMC!; " \ - "echo Performing Rollback!; " \ - "setenv _active_ ${active_root}; " \ - "setenv _inactive_ ${inactive_root}; " \ - "setenv active_root ${_inactive_}; " \ - "setenv inactive_root ${_active_}; " \ - "saveenv; " \ - "reset; " \ - "fi; " #endif /* Regular Boot */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index bf01a77..f5f2b63 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -90,25 +90,6 @@ "nand read ${fdtaddr} aa0000 80000; " \ "bootm ${loadaddr} - ${fdtaddr}\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device $mmcdev; " \ - "if run loadbootenv; then " \ - "run importbootenv; " \ - "fi; " \ - "echo Checking if uenvcmd is set ...; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...; " \ - "run uenvcmd; " \ - "fi; " \ - "echo Running default loadimage ...; " \ - "setenv bootfile zImage; " \ - "if run loadimage; then " \ - "run loadfdt; " \ - "run mmcboot; " \ - "fi; " \ - "else run nandboot; fi" - /* Miscellaneous configurable options */ /* We set the max number of command args high to avoid HUSH bugs. */ diff --git a/include/configs/amcore.h b/include/configs/amcore.h index fd05ea6..d813af1 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -13,7 +13,6 @@ #define CONFIG_MCFTMR #define CONFIG_SYS_UART_PORT 0 -#define CONFIG_BOOTCOMMAND "bootm ffc20000" #define CONFIG_EXTRA_ENV_SETTINGS \ "upgrade_uboot=loady; " \ "protect off 0xffc00000 0xffc1ffff; " \ diff --git a/include/configs/ap121.h b/include/configs/ap121.h index e23a7dc..70cd2ee 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -20,10 +20,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) -#define CONFIG_BOOTCOMMAND "sf probe;" \ - "mtdparts default;" \ - "bootm 0x9f650000" - /* Miscellaneous configurable options */ /* diff --git a/include/configs/ap143.h b/include/configs/ap143.h index 80b64da..167cc47 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -25,10 +25,6 @@ */ #define CONFIG_SYS_NS16550_CLK 25000000 -#define CONFIG_BOOTCOMMAND "sf probe;" \ - "mtdparts default;" \ - "bootm 0x9f680000" - /* Miscellaneous configurable options */ /* diff --git a/include/configs/ap152.h b/include/configs/ap152.h index 762cc67..5bfca42 100644 --- a/include/configs/ap152.h +++ b/include/configs/ap152.h @@ -25,12 +25,6 @@ */ #define CONFIG_SYS_NS16550_CLK 25000000 -#define CONFIG_BOOTCOMMAND "sf probe;" \ - "mtdparts default;" \ - "bootm 0x9f060000" - -#define CONFIG_ENV_SPI_MAX_HZ 25000000 - /* Miscellaneous configurable options */ /* diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index 27007c5..c2b0d6f 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -50,7 +50,7 @@ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ "\0" \ @@ -68,8 +68,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Apalis iMX8 USDHC1 is eMMC, USDHC2 is 8-bit and USDHC3 is 4-bit MMC/SD */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h index 50dae2d..402fed1 100644 --- a/include/configs/apalis-imx8x.h +++ b/include/configs/apalis-imx8x.h @@ -77,7 +77,7 @@ "mmcargs=setenv bootargs ${consoleargs} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs ${consoleargs} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ "${vidargs}\0" \ @@ -99,8 +99,6 @@ /* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index dfed161..c165f61 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -45,8 +45,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/apple.h b/include/configs/apple.h index b1f6043..3e5fb49 100644 --- a/include/configs/apple.h +++ b/include/configs/apple.h @@ -3,10 +3,6 @@ #include <linux/sizes.h> -#define CONFIG_SYS_SDRAM_BASE 0x880000000 - -#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_TEXT_BASE - /* Environment */ #define ENV_DEVICE_SETTINGS \ "stdin=serial,usbkbd\0" \ diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index b73b0d5..e639737 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -443,7 +443,6 @@ /* Framebuffer */ /* check this console not needed, after test remove it */ #define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX6_PWM_PER_CLK 66000000 diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 73f63c5..7714da4 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -17,7 +17,7 @@ #define CONFIG_TMU_TIMER #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (CONFIG_SYS_CLK_FREQ / 4) +#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 4) /* STACK */ #define CONFIG_SYS_INIT_SP_ADDR 0xE8083000 @@ -72,7 +72,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 50000000 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() #endif /* __ARMADILLO_800EVA_H */ diff --git a/include/configs/aspeed-common.h b/include/configs/aspeed-common.h index 5177bf2..96526e1 100644 --- a/include/configs/aspeed-common.h +++ b/include/configs/aspeed-common.h @@ -38,13 +38,4 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Miscellaneous configurable options - */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=yes\0" \ - "spi_dma=yes\0" \ - "" - #endif /* __AST_COMMON_CONFIG_H */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 36e351f..d87ca30 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -58,7 +58,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* * Defines processor clock - important for correct timings concerning serial @@ -91,7 +90,6 @@ */ #ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 3355 /* timeout in milliseconds */ #endif @@ -140,18 +138,6 @@ * by external update.c; This is not included in mainline because * it needs non-blocking CFI routines. */ -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_BOOTCOMMAND "" /* no autoboot in this case */ -#else -#if ASTRO_V532 -#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\ - "run xilinxload&&run alteraload&&bootm 0x80000;"\ - "update;reset" -#else -#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\ - "run xilinxload&&bootm 0x80000;update;reset" -#endif -#endif #define CONFIG_FPGA_COUNT 1 #define CONFIG_SYS_FPGA_PROG_FEEDBACK diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 9a73e3a..b93c67b 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -21,31 +21,12 @@ #define CONFIG_BOOTP_BOOTFILESIZE #ifdef CONFIG_SD_BOOT -#define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ - "setenv dtb_name at91-${board_name}.dtb; " \ - "fi; " \ - "fatload mmc 0:1 0x21000000 ${dtb_name}; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" - #else #ifdef CONFIG_NAND_BOOT /* u-boot env in nand flash */ -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" #elif CONFIG_SPI_BOOT /* u-boot env in serial flash, by default is bus 0 and cs 0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x60000 0xc000; " \ - "sf read 0x22000000 0x6c000 0x394000; " \ - "bootz 0x22000000 - 0x21000000" -#elif CONFIG_QSPI_BOOT -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x180000 0x80000; " \ - "sf read 0x22000000 0x200000 0x600000; " \ - "bootz 0x22000000 - 0x21000000" #endif #endif diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index d09a5db..c9344e8 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -87,27 +87,13 @@ #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0:0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" - -#elif CONFIG_SYS_USE_DATAFLASH_CS1 - -#define CONFIG_BOOTCOMMAND "sf probe 0:1; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" - #elif defined(CONFIG_SYS_USE_NANDFLASH) /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ /* For FAT system, most cases it should be in the reserved sector */ - -#define CONFIG_BOOTCOMMAND \ - "fatload mmc 0:1 0x22000000 uImage; bootm" #endif #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index fb4695c..7fce98f 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -90,21 +90,14 @@ #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #elif CONFIG_SYS_USE_DATAFLASH_CS3 /* bootstrap + u-boot + env + linux in dataflash on CS3 */ -#define CONFIG_BOOTCOMMAND "sf probe 0:3; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #else /* CONFIG_SYS_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" #endif #endif diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index e7fca46..5aa9fee 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -207,14 +207,10 @@ #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #elif CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" #endif #endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 500c9ae..973e889 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -64,16 +64,8 @@ #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ - -#define CONFIG_BOOTCOMMAND \ - "nand read 0x70000000 0x200000 0x300000;" \ - "bootm 0x70000000" #elif CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in mmc */ - -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ - "fatload mmc 0:1 0x72000000 zImage; " \ - "bootz 0x72000000 - 0x71000000" #endif /* Defines for SPL */ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 43f9852..f102dbe 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -71,28 +71,10 @@ #ifdef CONFIG_SPI_BOOT /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ - "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ - "bootm 0x22000000" #elif defined(CONFIG_NAND_BOOT) /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ - "nand read 0x21000000 0x180000 0x080000;" \ - "nand read 0x22000000 0x200000 0x400000;" \ - "bootm 0x22000000 - 0x21000000" - -#else /* CONFIG_SD_BOOT */ - -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ - "fatload mmc 0:1 0x21000000 dtb;" \ - "fatload mmc 0:1 0x22000000 uImage;" \ - "bootm 0x22000000 - 0x21000000" - #endif /* SPL */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index c703276..5bc47d6 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -59,22 +59,13 @@ #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #elif CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x600000; " \ - "nand read 0x21000000 0x180000 0x80000; " \ - "bootz 0x22000000 - 0x21000000" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" #endif #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index f15711b..e6d5b99 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -62,20 +62,10 @@ #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read " \ - "0x22000000 0x200000 0x600000; " \ - "nand read 0x21000000 0x180000 0x20000; " \ - "bootz 0x22000000 - 0x21000000" #elif defined(CONFIG_SPI_BOOT) /* bootstrap + u-boot + env + linux in spi flash */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x100000 0x300000; " \ - "bootm 0x22000000" #elif defined(CONFIG_SYS_USE_DATAFLASH) /* bootstrap + u-boot + env + linux in data flash */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #endif /* SPL */ diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 32f2174..f4ab664 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -185,15 +185,6 @@ /*DFUARGS*/ #endif -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run usbboot;" \ - "run mmcboot;" \ - "setenv mmcdev 1; " \ - "setenv bootpart 1:2; " \ - "run mmcboot;" \ - "run nandboot;" - /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ diff --git a/include/configs/bcm_ns3.h b/include/configs/bcm_ns3.h index a57edf5..81b4218 100644 --- a/include/configs/bcm_ns3.h +++ b/include/configs/bcm_ns3.h @@ -44,7 +44,6 @@ /* Access eMMC Boot_1 and Boot_2 partitions */ /* enable 64-bit PCI resources */ -#define CONFIG_SYS_PCI_64BIT 1 #define CONSOLE_ARGS "console_args=console=ttyS0,115200n8\0" #define MAX_CPUS "max_cpus=maxcpus=8\0" @@ -277,12 +276,6 @@ "setenv bl_flash_pending_rfs_imgs;" \ "fi; \0" -#define CONFIG_BOOTCOMMAND "run flash_pending_rfs_imgs;" \ - "run fastboot_nitro && "\ - "run bootcmd_mmc_fits || "\ - "run bootcmd_usb || "\ - "run bootcmd_pxe" - /* Flashing commands */ #define TFTP_QSPI_PARAM \ "fip_qspi_addr=0x0\0"\ diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index e7f380b..98c8159 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -90,7 +90,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * CONFIG_SYS_LOAD_ADDR - 1 MiB. */ -#define CONFIG_SYS_FDT_SAVE_ADDRESS 0x1f00000 #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 @@ -104,7 +103,6 @@ extern phys_addr_t prior_stage_fdt_address; */ #define V_NS16550_CLK 81000000 -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK @@ -126,8 +124,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * Flash configuration. */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_MACRONIX /* * Filesystem configuration. diff --git a/include/configs/beacon-rzg2m.h b/include/configs/beacon-rzg2m.h index 14d6df3..7eaafb0 100644 --- a/include/configs/beacon-rzg2m.h +++ b/include/configs/beacon-rzg2m.h @@ -67,18 +67,4 @@ "booti; " \ "fi;\0" -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - #endif /* __BEACON_RZG2M_H */ diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index c377094..e0508b0 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -32,10 +32,6 @@ "preboot=" BK4_NET_INIT \ "if ${ncenable}; then run if_netconsole start_netconsole; fi\0" -/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/ -#define BK4_BOOTCOMMAND "run set_gpio122; run set_gpio96; sf probe; " \ - "run manage_userdata; " - /* Enable PREBOOT variable */ /* Set ARP_TIMEOUT to 500ms */ @@ -76,7 +72,6 @@ #define CONFIG_BOARD_SIZE_LIMIT 520192 /* boot command, including the target-defined one if any */ -#define CONFIG_BOOTCOMMAND BK4_BOOTCOMMAND "run bootcmd_nand" /* Extra env settings (including the target-defined ones if any) */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/blanche.h b/include/configs/blanche.h index f048f15..882b94f 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -45,8 +45,6 @@ #endif /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK /* ENV setting */ diff --git a/include/configs/broadcom_bcm963158.h b/include/configs/broadcom_bcm963158.h index de45f74..5aa784d 100644 --- a/include/configs/broadcom_bcm963158.h +++ b/include/configs/broadcom_bcm963158.h @@ -28,7 +28,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/broadcom_bcm968360bg.h b/include/configs/broadcom_bcm968360bg.h index 0391f06..01bab04 100644 --- a/include/configs/broadcom_bcm968360bg.h +++ b/include/configs/broadcom_bcm968360bg.h @@ -27,7 +27,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/broadcom_bcm968380gerg.h b/include/configs/broadcom_bcm968380gerg.h index 866de25..c1c1b37 100644 --- a/include/configs/broadcom_bcm968380gerg.h +++ b/include/configs/broadcom_bcm968380gerg.h @@ -8,5 +8,4 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/broadcom_bcm968580xref.h b/include/configs/broadcom_bcm968580xref.h index 179aa9d..ebfc2ec 100644 --- a/include/configs/broadcom_bcm968580xref.h +++ b/include/configs/broadcom_bcm968580xref.h @@ -27,7 +27,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h index d917976..d34d697 100644 --- a/include/configs/brxre1.h +++ b/include/configs/brxre1.h @@ -53,8 +53,6 @@ BUR_COMMON_ENV \ " do run b_${target}; if test ${b_break} = 1; then; exit; fi; done\0" #endif /* !CONFIG_SPL_BUILD*/ -#define CONFIG_BOOTCOMMAND "mmc dev 1; run b_default" - /* Environment */ #endif /* __CONFIG_BRXRE1_H__ */ diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 58ab1b7..1cde5f7 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -11,15 +11,12 @@ #include <asm/arch/imx-regs.h> #include "siemens-env-common.h" -#include "siemens-ccp-common.h" /* SPL config */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -35,9 +32,6 @@ #define CONFIG_FACTORYSET -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") - #define CONFIG_REMAKE_ELF /* ENET Config */ @@ -117,20 +111,11 @@ ENV_EMMC \ ENV_NET -#define CONFIG_BOOTCOMMAND \ - "if usrbutton; then " \ - "run flash_self_test; " \ - "reset; " \ - "fi;" \ - "run flash_self;" \ - "reset;" - /* Default location for tftp and bootm */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* On CCP board, USDHC1 is for eMMC */ #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* eMMC */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM_1 0x80000000 diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 4523595..d5549f6 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -14,8 +14,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -33,7 +31,6 @@ #define CONFIG_REMAKE_ELF /* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -82,7 +79,7 @@ "boot_fdt=try\0" \ "fdt_file=imx8qm-cgt-qmx8.dtb\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \ @@ -123,24 +120,10 @@ "booti; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index 49a8d71..afddedd 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -31,11 +31,6 @@ "nand read ${loadaddr} NAND.kernel; " \ "bootz ${loadaddr} - ${fdt_addr}\0" -#define CONFIG_BOOTCOMMAND \ - "run mmcboot; " \ - "run nandboot; " \ - "run netboot" - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "fdt_addr=0x87800000\0" \ diff --git a/include/configs/chromebook_coral.h b/include/configs/chromebook_coral.h index 4d44b3b..0eeea80 100644 --- a/include/configs/chromebook_coral.h +++ b/include/configs/chromebook_coral.h @@ -10,19 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_BOOTCOMMAND \ - "tpm init; tpm startup TPM2_SU_CLEAR; " \ - "read mmc 0:2 100000 0 80; setexpr loader *001004f0; " \ - "setexpr size *00100518; setexpr blocks $size / 200; " \ - "read mmc 0:2 100000 80 $blocks; setexpr setup $loader - 1000; " \ - "setexpr cmdline_ptr $loader - 2000; " \ - "setexpr.s cmdline *$cmdline_ptr; " \ - "setexpr cmdline gsub %U \\\\${uuid}; " \ - "if part uuid mmc 0:2 uuid; then " \ - "zboot start 100000 0 0 0 $setup cmdline; " \ - "zboot load; zboot setup; zboot dump; zboot go;" \ - "fi" - #include <configs/x86-common.h> #include <configs/x86-chromebook.h> @@ -31,8 +18,6 @@ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" -#define CONFIG_TPL_TEXT_BASE 0xffff8000 - #define CONFIG_SYS_NS16550_MEM32 #undef CONFIG_SYS_NS16550_PORT_MAPPED diff --git a/include/configs/chromebook_samus.h b/include/configs/chromebook_samus.h index 2fe3e72..9d5a63c 100644 --- a/include/configs/chromebook_samus.h +++ b/include/configs/chromebook_samus.h @@ -23,6 +23,4 @@ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" -#define CONFIG_TPL_TEXT_BASE 0xfffd8000 - #endif /* __CONFIG_H */ diff --git a/include/configs/ci20.h b/include/configs/ci20.h index 0a7043a..17954fe 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot argument buffer size */ -#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ /* Miscellaneous configuration options */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) @@ -50,6 +49,4 @@ #define CONFIG_SPL_START_S_PATH "arch/mips/mach-jz47xx" -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x1c /* 14 KiB offset */ - #endif /* __CONFIG_CI20_H__ */ diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index fdc8429..a5bf6cc 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -30,7 +30,6 @@ #undef CONFIG_SYS_AUTOLOAD #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_BOOTCOMMAND #define CONFIG_SYS_AUTOLOAD "no" @@ -50,7 +49,7 @@ "fdtaddr=0x83000000\0" \ "mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \ "usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \ "doboot=bootz ${loadaddr} - ${fdtaddr}\0" \ "mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \ @@ -86,11 +85,6 @@ "emmcbootscript=setenv mmcdev 1; setenv mmcblk 2; run mmcbootscript\0" \ "emmcboot=setenv mmcdev 1; setenv mmcblk 2; run mmcboot\0" \ -#define CONFIG_BOOTCOMMAND \ - "echo SD boot attempt ...; run sdbootscript; run sdboot; " \ - "echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \ - "echo USB boot attempt ...; run usbbootscript; " - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index d61d759..40bc821 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -13,7 +13,6 @@ #include "mx6_common.h" /* Machine config */ -#define CONFIG_SYS_LITTLE_ENDIAN /* MMC */ #define CONFIG_SYS_FSL_USDHC_NUM 3 @@ -177,7 +176,6 @@ /* Display */ #define CONFIG_IMX_HDMI -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO /* EEPROM */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 4b6e391..7e187a4 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -55,18 +55,6 @@ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ MMCARGS \ NANDARGS - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi" #endif /* CONFIG_SPL_BUILD */ #define CONFIG_TIMESTAMP diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index e250dc9..2d09a6f 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -78,18 +78,6 @@ "load mmc 1 ${fdtaddr} ${fdtfile} && " \ "bootz ${loadaddr} - ${fdtaddr}\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev 0; " \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "fi; " \ - "fi; " \ - "mmc dev 1; " \ - "if mmc rescan; then " \ - "run emmcboot; " \ - "fi;" - /* SPL defines. */ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index dbb47cc..3e19e99 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -54,7 +54,6 @@ */ #if 0 -#define CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ #endif @@ -124,7 +123,6 @@ u-boot: 'set' command */ #if 0 -#define CONFIG_BOOTCOMMAND "bootm 0xffe80000" /*Autoboto command, please enter a valid image address in flash */ /* User network settings */ @@ -247,36 +245,6 @@ enter a valid image address in flash */ CF_CACR_EUSP) /*----------------------------------------------------------------------- - * Memory bank definitions - * - * Please refer also to Motorola Coldfire user manual - Chapter XXX - * <http://e-www.motorola.com/files/dsp/doc/ref_manual/MCF5272UM.pdf> - */ -#define CONFIG_SYS_BR0_PRELIM 0xFFE00201 -#define CONFIG_SYS_OR0_PRELIM 0xFFE00014 - -#define CONFIG_SYS_BR1_PRELIM 0 -#define CONFIG_SYS_OR1_PRELIM 0 - -#define CONFIG_SYS_BR2_PRELIM 0 -#define CONFIG_SYS_OR2_PRELIM 0 - -#define CONFIG_SYS_BR3_PRELIM 0 -#define CONFIG_SYS_OR3_PRELIM 0 - -#define CONFIG_SYS_BR4_PRELIM 0 -#define CONFIG_SYS_OR4_PRELIM 0 - -#define CONFIG_SYS_BR5_PRELIM 0 -#define CONFIG_SYS_OR5_PRELIM 0 - -#define CONFIG_SYS_BR6_PRELIM 0 -#define CONFIG_SYS_OR6_PRELIM 0 - -#define CONFIG_SYS_BR7_PRELIM 0x00000701 -#define CONFIG_SYS_OR7_PRELIM 0xFF00007C - -/*----------------------------------------------------------------------- * LED config */ #define LED_STAT_0 0xffff /*all LEDs off*/ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index 6b3e1c6..787fe33 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -72,7 +72,6 @@ #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND) /* Run Distro Boot script if ubiboot fails */ -#define CONFIG_BOOTCOMMAND "run ubiboot || run distro_bootcmd;" #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5" #define MODULE_EXTRA_ENV_SETTINGS \ "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ @@ -165,7 +164,6 @@ #if defined(CONFIG_DM_VIDEO) #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 82926af..0118250 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -80,7 +80,7 @@ "mmcargs=setenv bootargs ${consoleargs} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs ${consoleargs} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ "${vidargs}\0" \ @@ -102,8 +102,6 @@ /* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index b103186..c8e733b 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -35,8 +35,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index ac188ee..faf27ba 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -110,8 +110,6 @@ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND) -#define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \ - "run distro_bootcmd;" #define MODULE_EXTRA_ENV_SETTINGS \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ UBI_BOOTCMD @@ -199,7 +197,6 @@ #define CONFIG_USBD_HS #if defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 0878676..0be7f5a 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -12,21 +12,12 @@ /* * High Level Board Configuration Options */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ /* Avoid overwriting factory configuration block */ #define CONFIG_BOARD_SIZE_LIMIT 0x40000 /* * Environment settings */ -#define CONFIG_BOOTCOMMAND \ - "if fatload mmc 0 0xa0000000 uImage; then " \ - "bootm 0xa0000000; " \ - "fi; " \ - "if usb reset && fatload usb 0 0xa0000000 uImage; then " \ - "bootm 0xa0000000; " \ - "fi; " \ - "bootm 0xc0000;" #define CONFIG_TIMESTAMP /* diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index e947b58..c377187 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -19,7 +19,6 @@ #define CONFIG_LCD_LOGO /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define UBOOT_UPDATE \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 71fe768..62f8518 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -14,10 +14,7 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_FSL_CLK - #ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_SYS_FSL_DCU_LE @@ -69,8 +66,6 @@ "ubi read ${fdt_addr_r} dtb && " \ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ -#define CONFIG_BOOTCOMMAND "run ubiboot || run distro_bootcmd;" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ diff --git a/include/configs/comtrend_vr3032u.h b/include/configs/comtrend_vr3032u.h index fc890af..ee29f70 100644 --- a/include/configs/comtrend_vr3032u.h +++ b/include/configs/comtrend_vr3032u.h @@ -10,5 +10,4 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/condor.h b/include/configs/condor.h index 36466f0..822ef71 100644 --- a/include/configs/condor.h +++ b/include/configs/condor.h @@ -27,7 +27,6 @@ /* Board Clock */ /* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/conga-qeval20-qa3-e3845.h b/include/configs/conga-qeval20-qa3-e3845.h index 01b67f7..6e819ad 100644 --- a/include/configs/conga-qeval20-qa3-e3845.h +++ b/include/configs/conga-qeval20-qa3-e3845.h @@ -21,12 +21,6 @@ #define VIDEO_IO_OFFSET 0 #define CONFIG_X86EMU_RAW_IO -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "load scsi 0:2 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \ - "load scsi 0:2 04000000 /boot/initrd.img-${kernel-ver}-generic;" \ - "run boot" - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel-ver=4.4.0-22\0" \ diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 5120c7b..ff385d9 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -122,26 +122,6 @@ " gpio clear ${gpio1}; gpio set ${gpio2};" \ " fi; sleep 0.12; done\0" -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off " \ - "console=${consoledev},${baudrate} ${othbootargs}; " \ - "tftpboot ${bootfile_addr} ${bootfile}; " \ - "bootm ${bootfile_addr}" - -#define MMCBOOTCOMMAND \ - "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ - "console=${consoledev},${baudrate} ${othbootargs}; " \ - "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; " \ - "bootm ${bootfile_addr}" - -#define CONFIG_BOOTCOMMAND \ - "if env exists keyprogram; then;" \ - " setenv keyprogram; run nfsboot;" \ - " fi;" \ - " run dobootfail" - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 1cf5c03..d6d679f 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -10,6 +10,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define SPLASH_SETTINGS "splashsource=virtio_fs\0" \ + "splashimage=0x1000000\0" + #include <configs/x86-common.h> #define CONFIG_SYS_MONITOR_LEN (1 << 20) diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 1e55d52..f6e0b2a 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -47,15 +47,12 @@ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #if defined(CONFIG_SPIFLASH) #elif defined(CONFIG_SDCARD) #define CONFIG_FSL_FIXED_MMC_LOCATION #endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -128,10 +125,6 @@ #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) -#define CONFIG_SYS_BR1_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 - #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ #ifdef CONFIG_PHYS_64BIT #define PIXIS_BASE_PHYS 0xfffdf0000ull @@ -139,9 +132,6 @@ #define PIXIS_BASE_PHYS PIXIS_BASE #endif -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ - #define PIXIS_LBMAP_SWITCH 7 #define PIXIS_LBMAP_MASK 0xf0 #define PIXIS_LBMAP_SHIFT 4 @@ -187,21 +177,6 @@ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ #endif /* CONFIG_NAND_FSL_ELBC */ #define CONFIG_SYS_FLASH_EMPTY_INFO @@ -414,7 +389,6 @@ #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif @@ -469,32 +443,6 @@ "fdtfile=p4080ds/p4080ds.dtb\0" \ "bdev=sda3\0" -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND HDBOOT - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 882cb48..27284f7 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -66,7 +66,6 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 -#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT #endif /* Ethernet */ @@ -79,10 +78,6 @@ /* bootstrap + u-boot + env in nandflash */ -#define CONFIG_BOOTCOMMAND \ - "nand read 0x70000000 0x200000 0x300000;" \ - "bootm 0x70000000" - /* Defines for SPL */ #define CONFIG_SPL_MAX_SIZE (12 * SZ_1K) #define CONFIG_SPL_STACK (SZ_16K) diff --git a/include/configs/crs3xx-98dx3236.h b/include/configs/crs3xx-98dx3236.h index 27b45a7..4dbc758 100644 --- a/include/configs/crs3xx-98dx3236.h +++ b/include/configs/crs3xx-98dx3236.h @@ -11,7 +11,6 @@ */ #define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) /* 64 MB */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg /* Environment in SPI NOR flash */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index f7c5d40..97c9276 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -18,7 +18,6 @@ * SoC Configuration */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) @@ -136,10 +135,6 @@ 59, 60, 61, 62, 63 } #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 10 - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SYS_NAND_SELF_INIT -#endif #endif /* @@ -171,10 +166,6 @@ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) #define CONFIG_HWCONFIG /* enable hwconfig */ -#define CONFIG_BOOTCOMMAND \ - "run envboot; " \ - "run mmcboot; " - #define DEFAULT_LINUX_BOOT_ENV \ "loadaddr=0xc0700000\0" \ "fdtaddr=0xc0600000\0" \ diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h index dd1ba49..fcdf7e9 100644 --- a/include/configs/dart_6ul.h +++ b/include/configs/dart_6ul.h @@ -90,8 +90,6 @@ "fit_addr=0x82000000\0" \ ENV_MMC -#define CONFIG_BOOTCOMMAND "run mmc_mmc_fit" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h index 6a4c5a7..1d242bf 100644 --- a/include/configs/db-xc3-24g4xg.h +++ b/include/configs/db-xc3-24g4xg.h @@ -6,12 +6,6 @@ #ifndef _CONFIG_DB_XC3_24G4G_H #define _CONFIG_DB_XC3_24G4G_H -/* - * High Level Configuration Options (easy to change) - */ - -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* Environment in SPI NOR flash */ /* NAND */ diff --git a/include/configs/deneb.h b/include/configs/deneb.h index a33165c..f155bb8 100644 --- a/include/configs/deneb.h +++ b/include/configs/deneb.h @@ -9,9 +9,6 @@ #include "capricorn-common.h" -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "06") - /* DDR3 board total DDR is 2 GB */ #undef PHYS_SDRAM_1_SIZE #define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 8e8ea56..1e24d05 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -28,7 +28,6 @@ /* * GPIO */ -#define CONFIG_LPC32XX_GPIO /* * Ethernet @@ -84,14 +83,6 @@ * Environment */ -#define CONFIG_BOOTCOMMAND \ - "dhcp; " \ - "tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; " \ - "tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; " \ - "setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; " \ - "setenv bootargs ${bootargs} ${nfsargs} ${userargs}; " \ - "bootm ${loadaddr} - ${dtbaddr}" - #define CONFIG_EXTRA_ENV_SETTINGS \ "autoload=no\0" \ "ethaddr=00:01:90:00:C0:81\0" \ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 591a33f..9282f83 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -46,15 +46,6 @@ /* TWL4030 */ -/* Board NAND Info */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - /* BOOTP/DHCP options */ #define CONFIG_BOOTP_NISDOMAIN #define CONFIG_BOOTP_BOOTFILESIZE @@ -126,8 +117,6 @@ "fi; " \ "else run nandboot; fi\0" -#define CONFIG_BOOTCOMMAND "run autoboot" - /* Boot Argument Buffer Size */ /* Defines for SPL */ diff --git a/include/configs/dfi-bt700.h b/include/configs/dfi-bt700.h index 6d0e68e..53ed7de 100644 --- a/include/configs/dfi-bt700.h +++ b/include/configs/dfi-bt700.h @@ -26,12 +26,6 @@ #define VIDEO_IO_OFFSET 0 #define CONFIG_X86EMU_RAW_IO -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \ - "load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;" \ - "run boot" - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel-ver=4.4.0-24\0" \ diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index ee56eb6..8b8cd4c 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -64,13 +64,6 @@ #endif #endif -/* Watchdog */ -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WDT -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200\0" \ @@ -84,8 +77,6 @@ "fdtfile=imx6q-dhcom-pdk2.dtb\0"\ BOOTENV -#define CONFIG_BOOTCOMMAND "run distro_bootcmd" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 2) \ diff --git a/include/configs/display5.h b/include/configs/display5.h index 329a60f..38ac869 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -56,16 +56,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 2 -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \ - "run recovery;" \ - "else if test ${BOOT_FROM} = FACTORY; then " \ - "run factory_nfs;" \ - "else " \ - "run boot_mmc;" \ - "fi;fi" -#endif - #define PARTS_DEFAULT \ /* Linux partitions */ \ "partitions=" \ @@ -200,7 +190,6 @@ "altbootcmd=run recovery\0" \ "bootdelay=1\0" \ "baudrate=115200\0" \ - "bootcmd=" CONFIG_BOOTCOMMAND "\0" \ "ethact=FEC\0" \ "netdev=eth0\0" \ "boot_os=y\0" \ @@ -325,13 +314,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* Watchdog */ -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WDT -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - /* ENV config */ #ifdef CONFIG_ENV_IS_IN_SPI_FLASH /* The 0x120000 value corresponds to above SPI-NOR memory MAP */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 18ff1bb..0590704 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -12,12 +12,6 @@ #ifndef _CONFIG_DNS325_H #define _CONFIG_DNS325_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ @@ -32,7 +26,6 @@ /* * Enable GPI0 support */ -#define CONFIG_KIRKWOOD_GPIO /* * Environment variables configurations @@ -72,17 +65,4 @@ "setenv bootenvrootfstype ${nandrootfstype}; " \ "setenv bootenvloadimage ${nandloadimage}\0" -#define CONFIG_BOOTCOMMAND \ - "if test -n ${bootenv} && usb start; then " \ - "if run loadbootenv; then " \ - "echo Loaded environment ${bootenv} from usb;" \ - "run importbootenv;" \ - "fi;" \ - "if test -n ${bootenvcmd}; then " \ - "echo Running bootenvcmd ...;" \ - "run bootenvcmd;" \ - "fi;" \ - "fi;" \ - "run setnandbootenv subbootcmd;" - #endif /* _CONFIG_DNS325_H */ diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 75a2476..0ad04ee 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -12,12 +12,6 @@ #define _CONFIG_DOCKSTAR_H /* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ @@ -34,13 +28,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:root; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x1100000 ${initrd}; " \ - "bootm 0x800000 0x1100000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ diff --git a/include/configs/draco.h b/include/configs/draco.h index 29ce3a5..d305608 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -47,24 +47,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_DRACO_H */ diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 5b71f70..beea234 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -11,12 +11,7 @@ #ifndef _CONFIG_DREAMPLUG_H #define _CONFIG_DREAMPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations @@ -30,11 +25,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "setenv ethact ethernet-controller@72000; " \ - "${x_bootcmd_ethernet}; setenv ethact ethernet-controller@76000; " \ - "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" #define CONFIG_EXTRA_ENV_SETTINGS \ "x_bootcmd_ethernet=ping 192.168.2.1\0" \ diff --git a/include/configs/ds109.h b/include/configs/ds109.h index 62fe144..8553ea0 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -11,12 +11,7 @@ #ifndef _CONFIG_DS109_H #define _CONFIG_DS109_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations @@ -30,10 +25,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ - "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" #define CONFIG_EXTRA_ENV_SETTINGS \ "x_bootcmd_ethernet=ping 192.168.1.2\0" \ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 1f2d2c5..7fba2b4 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -58,11 +58,6 @@ #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) /* Default Environment */ -#define CONFIG_BOOTCOMMAND \ - "sf probe; " \ - "sf read ${loadaddr} 0xd0000 0x2d0000; " \ - "sf read ${ramdisk_addr_r} 0x3a0000 0x430000; " \ - "bootm ${loadaddr} ${ramdisk_addr_r}" #define CONFIG_EXTRA_ENV_SETTINGS \ "initrd_high=0xffffffff\0" \ diff --git a/include/configs/durian.h b/include/configs/durian.h index 1dec09b..c0ea42e 100644 --- a/include/configs/durian.h +++ b/include/configs/durian.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (0x88000000 - 0x100000) /* PCI CONFIG */ -#define CONFIG_SYS_PCI_64BIT 1 #define CONFIG_PCI_SCAN_SHOW /* SCSI */ diff --git a/include/configs/eagle.h b/include/configs/eagle.h index ee53504..b8a7b5a 100644 --- a/include/configs/eagle.h +++ b/include/configs/eagle.h @@ -18,7 +18,6 @@ /* Board Clock */ /* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 1949c3f..62b62e0 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -18,8 +18,6 @@ #undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ -#define CONFIG_BOOTCOMMAND "printenv" - /*----------------------------------------------------------------------* * Options * *----------------------------------------------------------------------*/ @@ -27,8 +25,6 @@ #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY -#define CONFIG_HW_WATCHDOG - #define STATUS_LED_ACTIVE 0 /*----------------------------------------------------------------------* @@ -189,8 +185,6 @@ * I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_DS1338 #define CONFIG_I2C_RTC_ADDR 0x68 diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index 48d4c8a..081d5e9 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -25,7 +25,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/edison.h b/include/configs/edison.h index 3ec35db..02f33f3 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -14,9 +14,6 @@ #define CONFIG_SYS_MAXARGS 128 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Memory */ -#define CONFIG_PHYSMEM - #define CONFIG_SYS_STACK_SIZE (32 * 1024) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 664d6d1..e20e058 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -28,9 +28,6 @@ * High Level Configuration Options (easy to change) */ -#define CONFIG_FEROCEON 1 /* CPU Core subversion */ -#define CONFIG_88F5182 1 /* SOC Name */ - #include <asm/arch/orion5x.h> /* * CLKs configurations @@ -113,8 +110,6 @@ */ #ifdef CONFIG_IDE #define __io -/* Needs byte-swapping for ATA data register */ -#define CONFIG_IDE_SWAP_IO /* Data, registers and alternate blocks are at the same offset */ #define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) #define CONFIG_SYS_ATA_REG_OFFSET (0x0100) diff --git a/include/configs/efi-x86_app.h b/include/configs/efi-x86_app.h index 6061a6d..33afb7c 100644 --- a/include/configs/efi-x86_app.h +++ b/include/configs/efi-x86_app.h @@ -10,8 +10,33 @@ #undef CONFIG_TPM_TIS_BASE_ADDRESS +/* + * Select the output device: Put an 'x' prefix before one of these to disable it + */ + +/* + * Video output - can normally continue after exit_boot_services has been + * called, since output to the display does not require EFI services at that + * point. U-Boot sets up the console memory and does its own drawing. + */ #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=vidconsole\0" \ "stderr=vidconsole\0" +/* + * Serial output with no console. Run qemu with: + * + * -display none -serial mon:stdio + * + * This will hang or fail to output on the console after exit_boot_services is + * called. + */ +#define xCONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + +#undef CONFIG_BOOTCOMMAND + +#define CONFIG_BOOTCOMMAND "part list efi 0; fatls efi 0:1" + #endif diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 9769155..d001580 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -52,7 +52,6 @@ #endif /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 3ff86ee..dc83ab7 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -84,9 +84,6 @@ */ /* nedded by compliance test in read mode */ -#if defined(CONFIG_SPL_CMT) -#define CONFIG_SYS_DCACHE_OFF -#endif /* Define own nand partitions */ #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) @@ -166,26 +163,5 @@ CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ CONFIG_ENV_SETTINGS_V2 \ CONFIG_ENV_SETTINGS_NAND_V2 - -#ifndef CONFIG_RESTORE_FLASH - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - - -#else -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" -#endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_ETAMIN_H */ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index c0bdfd3..ccf615e 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -54,9 +54,6 @@ #endif /* JFFS2 */ -#ifdef CONFIG_CMD_JFFS2 -#define CONFIG_JFFS2_NAND -#endif /* Ethernet */ #define CONFIG_NET_RETRY_COUNT 20 @@ -66,7 +63,6 @@ /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 #endif @@ -118,9 +114,6 @@ /* File systems */ /* Boot command */ -#define CONFIG_BOOTCOMMAND "sf probe 0:0; " \ - "sf read 0x22000000 0xc6000 0x294000; " \ - "bootm 0x22000000" /* Misc. u-boot settings */ diff --git a/include/configs/evb_ast2500.h b/include/configs/evb_ast2500.h index dc032c1..b109a15 100644 --- a/include/configs/evb_ast2500.h +++ b/include/configs/evb_ast2500.h @@ -13,4 +13,8 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* Misc */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "" + #endif /* __CONFIG_H */ diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h index 177a52e..3c2155d 100644 --- a/include/configs/evb_ast2600.h +++ b/include/configs/evb_ast2600.h @@ -10,4 +10,15 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* Misc */ +#define STR_HELPER(s) #s +#define STR(s) STR_HELPER(s) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=" STR(CONFIG_SYS_LOAD_ADDR) "\0" \ + "bootspi=fdt addr 20100000 && fdt header get fitsize totalsize && " \ + "cp.b 20100000 ${loadaddr} ${fitsize} && bootm; " \ + "echo Error loading kernel FIT image\0" \ + "" + #endif /* __CONFIG_H */ diff --git a/include/configs/evb_px30.h b/include/configs/evb_px30.h index 27201fc..53781ba 100644 --- a/include/configs/evb_px30.h +++ b/include/configs/evb_px30.h @@ -12,6 +12,4 @@ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" -#define CONFIG_SUPPORT_EMMC_RPMB - #endif diff --git a/include/configs/evb_rk3308.h b/include/configs/evb_rk3308.h index e8893eb..0273e75 100644 --- a/include/configs/evb_rk3308.h +++ b/include/configs/evb_rk3308.h @@ -8,8 +8,6 @@ #include <configs/rk3308_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/evb_rk3568.h b/include/configs/evb_rk3568.h index 2b255a1..a0f2383 100644 --- a/include/configs/evb_rk3568.h +++ b/include/configs/evb_rk3568.h @@ -8,8 +8,6 @@ #include <configs/rk3568_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/evb_rv1108.h b/include/configs/evb_rv1108.h index b742d98..13e3cb2 100644 --- a/include/configs/evb_rv1108.h +++ b/include/configs/evb_rv1108.h @@ -18,11 +18,4 @@ "serverip=172.16.12.69\0" \ "" -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "sf probe;" \ - "sf read 0x62000000 0x140800 0x500000;" \ - "dcache off;" \ - "go 0x62000000" - #endif diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 95aaa74..eb26069 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -19,8 +19,7 @@ /* Keep L2 Cache Disabled */ /* input clock of PLL: 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 -#define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ +#define COUNTER_FREQUENCY 24000000 /* select serial console configuration */ diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index cc9ffda..00b6778 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -30,7 +30,4 @@ #define LCD_BPP LCD_COLOR16 #endif -/* Enable keyboard */ -#define CONFIG_KEYBOARD - #endif diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 478a0c4..8d3449f 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -67,23 +67,6 @@ #define PHYS_SDRAM_12 (CONFIG_SYS_SDRAM_BASE + (11 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_12_SIZE SDRAM_BANK_SIZE -#define CONFIG_DEBUG_UART_CLOCK 132710400 - -#define CONFIG_PREBOOT \ -"echo Read pressed buttons status;" \ -"KEY_VOLUMEUP=gpa20;" \ -"KEY_HOME=gpa17;" \ -"KEY_VOLUMEDOWN=gpa21;" \ -"KEY_POWER=gpa00;" \ -"PRESSED=0;" \ -"RELEASED=1;" \ -"if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; " \ -"else setenv VOLUME_UP $RELEASED; fi;" \ -"if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; " \ -"else setenv VOLUME_DOWN $RELEASED; fi;" \ -"if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;" \ -"if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" - #ifndef MEM_LAYOUT_ENV_SETTINGS #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ diff --git a/include/configs/falcon.h b/include/configs/falcon.h index d783faf..1d6a9b9 100644 --- a/include/configs/falcon.h +++ b/include/configs/falcon.h @@ -26,7 +26,6 @@ /* Board Clock */ /* XTAL_CLK : 16.66MHz */ -#define CONFIG_SYS_CLK_FREQ 16666666u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/firefly_rk3308.h b/include/configs/firefly_rk3308.h index 3af2493..28e3a54 100644 --- a/include/configs/firefly_rk3308.h +++ b/include/configs/firefly_rk3308.h @@ -8,8 +8,6 @@ #include <configs/rk3308_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h index ec5fc15..c7fdf7c 100644 --- a/include/configs/gazerbeam.h +++ b/include/configs/gazerbeam.h @@ -100,22 +100,4 @@ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ "upd=run load update\0" \ -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp ${kernel_addr} $bootfile;" \ - "tftp ${fdt_addr} $fdtfile;" \ - "bootm ${kernel_addr} - ${fdt_addr}" - -#define MMCBOOTCOMMAND \ - "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \ - "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \ - "bootm ${kernel_addr} - ${fdt_addr}" - -#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h index 1a5db24..b4f9499 100644 --- a/include/configs/ge_b1x5v2.h +++ b/include/configs/ge_b1x5v2.h @@ -119,6 +119,4 @@ "run showsplashscreen; sleep 1; " \ "run doboot; run failbootcmd;\0" \ -#define CONFIG_BOOTCOMMAND "run tryboot;" - #endif /* __GE_B1X5V2_CONFIG_H */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 0eeffd4..bde14a7 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -98,15 +98,6 @@ "run doboot; " \ "run failbootcmd\0" \ -#define MMCBOOTCOMMAND \ - "run doquiet; " \ - "run tryboot; " \ - -#ifdef CONFIG_CMD_NFS -#define CONFIG_BOOTCOMMAND NETWORKBOOTCOMMAND -#else -#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND -#endif /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/giedi.h b/include/configs/giedi.h index dabb1fb..19a795b 100644 --- a/include/configs/giedi.h +++ b/include/configs/giedi.h @@ -9,9 +9,6 @@ #include "capricorn-common.h" -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") - /* DDR3 board total DDR is 1 GB */ #undef PHYS_SDRAM_1_SIZE #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1 GB */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 43027a5..90e37d9 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -15,12 +15,6 @@ #define _CONFIG_GOFLEXHOME_H /* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* * Default GPIO configuration and LED status */ #define GOFLEXHOME_OE_LOW (~(0)) @@ -49,12 +43,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:root; " \ - "ubifsload 0x800000 ${kernel}; " \ - "bootm 0x800000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ diff --git a/include/configs/gose.h b/include/configs/gose.h index 60a89e00..01657d7 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -30,8 +30,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index 29a446c..fb01c56 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -9,7 +9,6 @@ #define __GRPEACH_H /* Board Clock , P1 clock frequency (XTAL=13.33MHz) */ -#define CONFIG_SYS_CLK_FREQ 66666666 /* Miscellaneous */ #define CONFIG_SYS_PBSIZE 256 diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 8de888f..25c5a97 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -9,20 +9,7 @@ #ifndef _CONFIG_GURUPLUG_H #define _CONFIG_GURUPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -/* - * Standard filesystems - */ - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations @@ -40,15 +27,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x700000 ${fdt}; " \ - "ubifsumount; " \ - "fdt addr 0x700000; fdt resize; fdt chosen; " \ - "bootz 0x800000 - 0x700000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index abceffb..513b2d4 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -72,7 +72,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_VIDEO_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP #define CONFIG_VIDEO_BMP_LOGO @@ -254,10 +253,4 @@ "fi\0" #endif -#define CONFIG_BOOTCOMMAND \ - "for btype in ${bootdevs}; do " \ - "echo; echo Attempting ${btype} boot...; " \ - "if run ${btype}_boot; then; fi; " \ - "done" - #endif /* __CONFIG_H */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 5a1e72c..879bd5c 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -24,7 +24,6 @@ #endif /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND (which is 512M), aligned to start of last sector */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 4bd3494..9783fd8 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -8,12 +8,6 @@ #ifndef _CONFIG_IB62x0_H #define _CONFIG_IB62x0_H -/* - * High level configuration options - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* @@ -23,15 +17,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x700000 ${fdt}; " \ - "ubifsumount; " \ - "fdt addr 0x700000; fdt resize; fdt chosen; " \ - "bootz 0x800000 - 0x700000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ @@ -59,11 +44,4 @@ #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif /* CONFIG_IDE */ -/* - * RTC driver configuration - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_IB62x0_H */ diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index 1a716df..f1aad1e 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -8,12 +8,6 @@ #ifndef _CONFIG_ICONNECT_H #define _CONFIG_ICONNECT_H -/* - * High level configuration options - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* @@ -23,12 +17,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part rootfs; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "bootm 0x800000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 370f7ed..206a57a 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -153,7 +153,6 @@ /* * HW-Watchdog */ -#define CONFIG_WATCHDOG 1 #define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF /* @@ -232,12 +231,8 @@ #define CONFIG_LOADS_ECHO #define CONFIG_TIMESTAMP -#define CONFIG_BOOTCOMMAND "run boot_cramfs" #undef CONFIG_SYS_LOADS_BAUD_CHANGE -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_DEV "0" - /* mtdparts command line support */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -272,14 +267,6 @@ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "\0" -#define NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setipargs;run addmtd;" \ - "tftp ${loadaddr} ${bootfile};" \ - "tftp ${fdtaddr} ${fdtfile};" \ - "fdt addr ${fdtaddr};" \ - "bootm ${loadaddr} - ${fdtaddr}" - /* UBI Support */ #endif /* __CONFIG_H */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index c289d69..dffe175 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -103,7 +103,6 @@ #define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0xd8000000 -#define CONFIG_JFFS2_NAND #define CONFIG_MXC_NAND_HWECC /* diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index fed6545..b22b2fd 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -96,8 +96,6 @@ "run nandboot; " \ "fi\0" -#define CONFIG_BOOTCOMMAND "run $modeboot" - /* Miscellaneous configurable options */ #ifdef CONFIG_MX6UL @@ -156,7 +154,6 @@ #ifdef CONFIG_VIDEO_IPUV3 # define CONFIG_IMX_VIDEO_SKIP -# define CONFIG_VIDEO_LOGO # define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 7665626..7e56c8e 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -108,8 +108,6 @@ "fi; " \ "fi; " \ "else run netboot; fi" -#define CONFIG_BOOTCOMMAND \ - "run autoboot" #define CONFIG_ARP_TIMEOUT 200UL diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 01f8732..261ed90 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -16,7 +16,6 @@ #undef CONFIG_SYS_AUTOLOAD #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_BOOTCOMMAND /* * Use: @@ -33,7 +32,7 @@ "fdt_file=imx7-cm.dtb\0" \ "fdt_addr=0x83000000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ @@ -70,8 +69,6 @@ "bootz ${loadaddr} - ${fdt_addr}; " \ "\0" -#define CONFIG_BOOTCOMMAND "run boot${boot-mode}" - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -88,7 +85,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ /* USB Configs */ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 6868b80..991839c 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -81,7 +79,7 @@ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -125,20 +123,6 @@ "fi; " \ "fi;\0" -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi;" -#endif - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -168,8 +152,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_XCV_TYPE RGMII diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 2bdcc0a..77f0624 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -40,7 +38,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate}" \ @@ -80,18 +78,6 @@ "fi; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi;" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -105,9 +91,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR /* Monitor Command Prompt */ @@ -120,7 +103,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* FEC*/ #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 167ca19..c7022ef 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -53,7 +51,7 @@ "fdtfile=imx8mm-evk.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -85,8 +83,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_XCV_TYPE RGMII diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index 4b22ba1..d75fcf7 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -12,8 +12,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -30,9 +28,6 @@ # define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* CONFIG_SPL_BUILD */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 2) \ @@ -71,10 +66,6 @@ #define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */ #define CONFIG_SYS_BOOTM_LEN SZ_256M -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - /* UART */ #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR @@ -88,6 +79,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __IMX8MM_ICORE_MX8MM_H */ diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index f8d4142..7ab11cc 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -105,7 +103,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* FEC */ #define CONFIG_ETHPRIME "eth0" diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index f89836c..2843535 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -11,9 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -46,7 +43,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -95,18 +92,6 @@ "run loadramdisk; run ramargs; " \ "booti ${loadaddr} ${ramdisk_addr} ${fdt_addr} ${optargs}\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -136,7 +121,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* ENET Config */ #if defined(CONFIG_FEC_MXC) diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index ab89321..142fc3e 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -52,7 +50,7 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -84,6 +82,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 30cce1a..b810a55 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -67,7 +65,7 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -100,6 +98,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 7206c08..b099004 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_STACK 0x187FF0 @@ -61,7 +59,7 @@ "fdt_file=imx8mq-cm.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -91,6 +89,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 49a9526..6e1d387 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -72,7 +70,7 @@ "fdt_file=imx8mq-evk.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -102,10 +100,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 0366c11..1668ca8 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (172 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -62,7 +60,7 @@ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -103,18 +101,6 @@ "booti; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -130,10 +116,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR /* Monitor Command Prompt */ @@ -146,10 +128,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 11b5c16..884d741 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -15,8 +15,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -33,9 +31,6 @@ #define CONFIG_REMAKE_ELF -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 @@ -60,7 +55,7 @@ "initrd_addr=0x83800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -121,33 +116,12 @@ "fi;" \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if test ${sec_boot} = yes; then " \ - "if run loadcntr; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* Default environment is in SD */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 2c80f26..1a55351 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -64,7 +64,7 @@ "fdt_file=imx8qm-rom7720-a1.dtb\0" \ "initrd_addr=0x83800000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \ @@ -105,33 +105,10 @@ "booti; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -/* Default environment is in SD */ - -#ifdef CONFIG_QSPI_BOOT -#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#endif - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board, * USDHC3 is for SD on base board On DDR4 board, USDHC1 is mux for NAND, * USDHC2 is for SD, USDHC3 is for SD on base board diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index f59a9ef..3900ef1 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -13,8 +13,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -31,9 +29,6 @@ #define CONFIG_REMAKE_ELF -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 @@ -58,7 +53,7 @@ "initrd_addr=0x83800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}\0 " \ @@ -119,33 +114,12 @@ "fi;" \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if test ${sec_boot} = yes; then " \ - "if run loadcntr; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* Default environment is in SD */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 501f465..6b25b48 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_BOOTM_LEN (SZ_64M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -64,7 +61,7 @@ "fdtfile=imx8ulp-evk.dtb\0" \ "initrd_addr=0x83800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h index 64c0f5e..79feab3 100644 --- a/include/configs/imxrt1020-evk.h +++ b/include/configs/imxrt1020-evk.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20240000 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index 99d25c1..b507895 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20280000 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 @@ -22,7 +21,6 @@ DMAMEM_SZ_ALL) #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 2f8ac20..6d7d798 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -24,8 +24,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTCOMMAND "" - /* Flash settings */ #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ #define CONFIG_SYS_MAX_FLASH_SECT 128 diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index c4203ce..3ff7bb9 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -27,7 +27,6 @@ #define CONFIG_SMC91111_BASE 0xC8000000 #undef CONFIG_SMC91111_EXT_PHY -#define CONFIG_BOOTCOMMAND "tftpboot ; bootm" #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_IPADDR 192.168.1.104 #define CONFIG_BOOTFILE "uImage" diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index 56dd9c7..294ce46 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -50,27 +50,6 @@ "get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\ "name_fs=arago-base-tisdk-image-k2g-evm.cpio\0" -#ifndef CONFIG_TI_SECURE_DEVICE -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run envboot; " \ - "run init_${boot}; " \ - "run get_mon_${boot} run_mon; " \ - "run set_name_pmmc get_pmmc_${boot} run_pmmc; " \ - "run get_kern_${boot}; " \ - "run init_fw_rd_${boot}; " \ - "run get_fdt_${boot}; " \ - "run run_kern" -#else -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run envboot; " \ - "run run_mon_hs; " \ - "run init_${boot}; " \ - "run get_fit_${boot}; " \ - "bootm ${addr_fit}#${name_fdt}" -#endif - /* NAND Configuration */ #define CONFIG_SYS_NAND_PAGE_2K diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h index 869bd9b..98204bd 100644 --- a/include/configs/km/km-mpc8309.h +++ b/include/configs/km/km-mpc8309.h @@ -5,12 +5,6 @@ #define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - /* QE microcode/firmware address */ /* between the u-boot partition and env */ diff --git a/include/configs/km/km-mpc832x.h b/include/configs/km/km-mpc832x.h index de6e7da..888bb29 100644 --- a/include/configs/km/km-mpc832x.h +++ b/include/configs/km/km-mpc832x.h @@ -1,15 +1,4 @@ /* - * High Level Configuration Options - */ -#define CONFIG_KM8321 /* Keymile PBEC8321 board specific */ - -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - -/* * System IO Config */ #define CONFIG_SYS_SICRL SICRL_IRQ_CKS @@ -69,6 +58,3 @@ #define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 #define CONFIG_SYS_KMBEC_FPGA_SIZE 128 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index cca624e..a485c3a 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -19,12 +19,6 @@ #ifndef _CONFIG_KM_ARM_H #define _CONFIG_KM_ARM_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #define CONFIG_NAND_ECC_BCH /* include common defines/options for all Keymile boards */ @@ -74,7 +68,6 @@ #undef CONFIG_I2C_MVTWSI #define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ #define CONFIG_SYS_NUM_I2C_BUSES 6 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 743d09e..ba0e4dd 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -6,8 +6,6 @@ #ifndef __CONFIG_PG_WCOM_LS102XA_H #define __CONFIG_PG_WCOM_LS102XA_H -#define CONFIG_SYS_FSL_CLK - /* include common defines/options for all Keymile boards */ #include "keymile-common.h" @@ -18,8 +16,6 @@ CONFIG_KM_PHRAM + \ CONFIG_KM_RESERVED_PRAM) >> 10) -#define CONFIG_SYS_CLK_FREQ 66666666 - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) @@ -40,7 +36,6 @@ * IFC Definitions */ /* NOR Flash Definitions */ -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index 82c2a12..e58a695 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -34,8 +34,6 @@ /* KM_KIRKWOOD_128M16 */ #elif defined(CONFIG_KM_KIRKWOOD_128M16) #define CONFIG_HOSTNAME "km_kirkwood_128m16" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_DISABLE_PCIE /* KM_NUSA */ @@ -43,21 +41,14 @@ #define CONFIG_HOSTNAME "kmnusa" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg - /* KMCOGE5UN */ #elif defined(CONFIG_KM_COGE5UN) -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg #define CONFIG_HOSTNAME "kmcoge5un" #define CONFIG_KM_DISABLE_PCIE /* KM_SUSE2 */ #elif defined(CONFIG_KM_SUSE2) #define CONFIG_HOSTNAME "kmsuse2" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE #else diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 4dbd53c..98e5723 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -141,14 +141,11 @@ #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* Environment in parallel NOR-Flash */ #define CONFIG_ENV_TOTAL_SIZE 0x040000 #define ENV_DEL_ADDR 0xebf00000 /*direct for newenv*/ -#define CONFIG_SYS_CLK_FREQ 66666666 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -362,7 +359,6 @@ * Retain non-DM serial port for debug purposes. */ #if !defined(CONFIG_DM_SERIAL) -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index 60fe4ae..8f4685c 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -24,12 +24,6 @@ #include "km/km-mpc83xx.h" #include "km/km-mpc8360.h" -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - /** * KMCOGE5NE has 512 MB RAM */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 65a38c5..eca8998 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -30,8 +30,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h index 34304f9..2bac000 100644 --- a/include/configs/kontron-sl-mx6ul.h +++ b/include/configs/kontron-sl-mx6ul.h @@ -59,7 +59,6 @@ #ifdef CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 4152851..448749a 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -30,10 +30,6 @@ /* early stack pointer */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0) -/* memtest command */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x9fffffff - /* SMP */ #define CPU_RELEASE_ADDR secondary_boot_addr @@ -46,8 +42,7 @@ /* serial port */ #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) /* ethernet */ #define CONFIG_SYS_RX_ETH_BUFFER 8 diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index c1db6ea..0983d40 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -10,8 +10,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_FSL_CLK - /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 @@ -56,8 +54,6 @@ "bootm ${loadaddr}#${fit_config}\0" \ BOOTENV -#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(DHCP, dhcp, na) diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index 3061c96..c538085 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -82,8 +82,6 @@ "bootm ${loadaddr}#${fit_config}\0" \ BOOTENV -#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index c3f690c..1eb6daf 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -68,9 +68,8 @@ /* Clock */ #define CONFIG_GLOBAL_TIMER -#define CONFIG_SYS_CLK_FREQ (48000000) #define CONFIG_SYS_CPU_CLK (1196000000) -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ #define CONFIG_NFS_TIMEOUT 10000UL diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 146d8ad..046f188 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -6,35 +6,6 @@ #ifndef _CONFIG_LACIE_KW_H #define _CONFIG_LACIE_KW_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -/* SoC name */ -#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) -#define CONFIG_KW88F6192 -#else -#define CONFIG_KW88F6281 -#endif - -/* - * SDRAM configuration - */ - -/* - * Different SDRAM configuration and size for some of the boards derived - * from the Network Space v2 - */ -#if defined(CONFIG_INETSPACE_V2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg -#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg -#endif - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ @@ -70,7 +41,6 @@ /* * Enable GPI0 support */ -#define CONFIG_KIRKWOOD_GPIO /* * Enable I2C support @@ -97,9 +67,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "dhcp && run netconsole; " \ - "if run usbload || run diskload; then bootm; fi" #define CONFIG_EXTRA_ENV_SETTINGS \ "stdin=serial\0" \ diff --git a/include/configs/lager.h b/include/configs/lager.h index c5001e3..4c291aa 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -31,8 +31,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 6928179..b912db1 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -18,7 +18,6 @@ * SoC Configuration */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) @@ -61,32 +60,6 @@ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) #define CONFIG_HWCONFIG /* enable hwconfig */ #define CONFIG_SETUP_INITRD_TAG -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan; then " \ - "if run loadbootscr; then " \ - "run bootscript; " \ - "else " \ - "if run loadbootenv; then " \ - "echo Loaded env from ${bootenvfile};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run mmcargs; " \ - "if run loadfdt; then " \ - "echo Using ${fdtfile}...;" \ - "run fdtfixup; " \ - "run fdtboot; "\ - "fi; " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi; "\ - "run flashargs; " \ - "run flashboot" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootenvfile=uEnv.txt\0" \ "fdtfile=da850-lego-ev3.dtb\0" \ diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index d74b2bb..3a8dd47 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -23,8 +23,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -36,7 +34,7 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -87,19 +85,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index 44f9da7..bda4283 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* SATA */ -#define CONFIG_LIBATA -#define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA AHCI_BASE_ADDR @@ -74,16 +72,10 @@ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" -#else -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#endif #endif #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO" diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 4e654ca..5d56100 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -10,8 +10,6 @@ #include <asm/arch/stream_id_lsch2.h> #include <linux/sizes.h> -#define CONFIG_SYS_CLK_FREQ 125000000 - #ifdef CONFIG_TFABOOT #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #else @@ -45,11 +43,6 @@ /* I2C */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 @@ -78,15 +71,10 @@ "kernel_size=0x2800000\0" \ "bootm_size=0x10000000\0" \ -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ "$kernel_start $kernel_size && "\ "bootm $kernel_load" -#else -#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ - "$kernel_start $kernel_size && "\ - "bootm $kernel_load" #endif /* Monitor Command Prompt */ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 2711f65..ef57cf6 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -54,12 +54,9 @@ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" #endif #endif /* __LS1012ARDB_H__ */ diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index f8b3861..c61865c 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -8,9 +8,6 @@ #include "ls1012a_common.h" -#undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "ls1012afrwy" - /* Board Rev*/ #define BOARD_REV_A_B 0x0 #define BOARD_REV_C 0x00080000 @@ -92,14 +89,10 @@ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$BOARD\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ - "env exists secureboot && esbc_halt;" #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index a5900f2..cbcb3f7 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -75,19 +75,16 @@ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_SST /* cs1 */ #define CONFIG_SYS_DSPI_CTAR2 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_STMICRO /* cs2 */ #define CONFIG_SYS_DSPI_CTAR3 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_EON /* cs3 */ #define CONFIG_PCIE1 /* PCIE controller 1 */ @@ -138,14 +135,10 @@ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ - "env exists secureboot && esbc_halt;" #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index c8a2f12..c9a152e 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -92,14 +92,10 @@ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ - "env exists secureboot && esbc_halt;" #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 222caa1..7b4044f 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -9,13 +9,9 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * DDR: 800 MHz ( 1600 MT/s data rate ) */ @@ -48,8 +44,6 @@ #define SDRAM_CFG_BI 0x00000001 #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 - #define CONFIG_SPL_MAX_SIZE 0x1a000 #define CONFIG_SPL_STACK 0x1001d000 #define CONFIG_SPL_PAD_TO 0x1c000 @@ -100,9 +94,6 @@ CONFIG_SYS_SCSI_MAX_LUN) /* SPI */ -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SPI_FLASH_SPANSION -#endif /* * eTSEC @@ -174,9 +165,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #endif -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - #include <asm/fsl_secure_boot.h> #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 27b97ff..7edb5c6 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -9,22 +9,13 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_QIXIS_I2C_ACCESS -#else -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #endif #ifdef CONFIG_SD_BOOT @@ -76,7 +67,6 @@ unsigned long get_board_sys_clk(void); * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -298,11 +288,6 @@ unsigned long get_board_sys_clk(void); */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID @@ -323,7 +308,6 @@ unsigned long get_board_sys_clk(void); * Video */ #ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_FSL_DIU_CH7301 diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index f70b6e9..5f6c2a0 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -8,8 +8,6 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR @@ -18,8 +16,6 @@ /* XHCI Support - enabled by default */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_SYS_CLK_FREQ 100000000 - #define DDR_SDRAM_CFG 0x470c0008 #define DDR_CS0_BNDS 0x008000bf #define DDR_CS0_CONFIG 0x80014302 @@ -75,7 +71,6 @@ #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ #endif -#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index c099629..d4c6f4f 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -9,15 +9,11 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#define CONFIG_SYS_CLK_FREQ 100000000 - #define DDR_SDRAM_CFG 0x470c0008 #define DDR_CS0_BNDS 0x008000bf #define DDR_CS0_CONFIG 0x80014302 @@ -89,7 +85,6 @@ * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -191,11 +186,6 @@ */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID @@ -209,7 +199,6 @@ * Video */ #ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_FSL_DCU_SII9022A @@ -378,18 +367,6 @@ "bootm $load_addr#$board\0" #endif -#undef CONFIG_BOOTCOMMAND -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;" \ - "env exists secureboot && esbc_halt;" -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 1401264..f47bc73 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -7,7 +7,6 @@ #define __L1028A_COMMON_H #define CONFIG_REMAKE_ELF -#define CONFIG_MP #include <asm/arch/stream_id_lsch3.h> #include <asm/arch/config.h> @@ -32,11 +31,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ @@ -60,8 +54,6 @@ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_BOOTCOMMAND - #define XSPI_NOR_BOOTCOMMAND \ "run xspi_hdploadcmd; run distro_bootcmd; run xspi_bootcmd; " \ "env exists secureboot && esbc_halt;;" diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index fe20363..8e3bd77 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -8,8 +8,7 @@ #include "ls1028a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 348db1e..5ce9ebb 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -8,8 +8,7 @@ #include "ls1028a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index bdf1b43..3b4f822 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -112,17 +112,11 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* IFC */ #ifndef SPL_NO_IFC #if defined(CONFIG_TFABOOT) || \ (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)) -#define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) @@ -154,13 +148,6 @@ #endif /* DSPI */ -#ifndef SPL_NO_DSPI -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ -#define CONFIG_SPI_FLASH_SST /* cs1 */ -#define CONFIG_SPI_FLASH_EON /* cs2 */ -#endif -#endif /* FMan ucode */ #ifndef SPL_NO_FMAN @@ -261,7 +248,6 @@ "bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" @@ -271,17 +257,6 @@ "env exists secureboot && esbc_halt;" #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ "env exists secureboot && esbc_halt;" -#else -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#endif #endif #endif diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index ee56605..80eff7b 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -8,12 +8,6 @@ #include "ls1043a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -330,12 +324,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "ls1043aqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_INA220 /* The lowest and highest voltage allowed for LS1043AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 0d071c4..7b6d193 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -8,8 +8,6 @@ #include "ls1043a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 515f420..d07d27d 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -110,11 +110,6 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index 5b78c5f..14ad84a 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -8,8 +8,6 @@ #include "ls1046a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -17,8 +15,6 @@ #define CONFIG_SYS_UBOOT_BASE 0x40100000 -/* IFC */ -#define CONFIG_FSL_IFC /* * NAND Flash Definitions */ @@ -109,7 +105,6 @@ #endif -#undef CONFIG_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;;" #define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; " \ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 8bc09d0..97bf418 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -8,12 +8,6 @@ #include "ls1046a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -43,7 +37,6 @@ unsigned long get_board_sys_clk(void); /* IFC */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) @@ -339,12 +332,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "ls1046aqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_INA220 /* The lowest and highest voltage allowed for LS1046AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -362,7 +349,6 @@ unsigned long get_board_sys_clk(void); * Environment */ -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ "env exists secureboot && esbc_halt;;" @@ -372,20 +358,6 @@ unsigned long get_board_sys_clk(void); "env exists secureboot && esbc_halt;;" #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ "env exists secureboot && esbc_halt;;" -#else -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#elif defined(CONFIG_NAND_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#endif #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index d06f338..8ed1dce 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -9,8 +9,6 @@ #include "ls1046a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -27,14 +25,6 @@ #define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 #endif -#ifndef SPL_NO_IFC -/* IFC */ -#define CONFIG_FSL_IFC -/* - * NAND Flash Definitions - */ -#endif - #define CONFIG_SYS_NAND_BASE 0x7e800000 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE @@ -145,20 +135,11 @@ #endif #ifndef SPL_NO_MISC -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;;" #define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; " \ "env exists secureboot && esbc_halt;" -#else -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#endif #endif #endif diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index c816ee1..2e52108 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -49,11 +49,6 @@ #define CPU_RELEASE_ADDR secondary_boot_addr /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ @@ -63,11 +58,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) -/* IFC */ -#define CONFIG_FSL_IFC -#endif - /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet @@ -173,25 +163,6 @@ unsigned long long get_qixis_addr(void); "console=ttyAMA0,38400n8\0" \ "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" - -#ifndef CONFIG_TFABOOT -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \ - "sf read 0x80001000 0xd00000 0x100000;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " sf read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " mmc read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#else /* NOR BOOT*/ -#define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \ - " cp.b $kernel_start $kernel_load" \ - " $kernel_size && bootm $kernel_load" -#endif -#endif /* CONFIG_TFABOOT */ #endif /* Monitor Command Prompt */ diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index d001acf..5912fe9 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -8,22 +8,14 @@ #include "ls1088a_common.h" - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_QIXIS_I2C_ACCESS #define SYS_NO_FLASH - -#define CONFIG_SYS_CLK_FREQ 100000000 #else #define CONFIG_QIXIS_I2C_ACCESS -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #endif -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define COUNTER_FREQUENCY 25000000 /* 25MHz */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -298,16 +290,10 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 #define I2C_SVDD_MONITOR_ADDR 0x4F -#define CONFIG_VID_FLS_ENV "ls1088aqds_vdd_mv" -#define CONFIG_VID - /* The lowest and highest voltage allowed for LS1088AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - #define PWM_CHANNEL0 0x0 /* @@ -321,9 +307,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_EEPROM_BUS_NUM 0 #ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON #if !defined(CONFIG_TFABOOT) && \ !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #endif diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 6ad1fea..400b8ad 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -16,7 +16,6 @@ #define SYS_NO_FLASH #endif -#define CONFIG_SYS_CLK_FREQ 100000000 #define COUNTER_FREQUENCY_REAL 25000000 /* 25MHz */ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ @@ -197,16 +196,10 @@ #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 #define I2C_SVDD_MONITOR_ADDR 0x4F -#define CONFIG_VID_FLS_ENV "ls1088ardb_vdd_mv" -#define CONFIG_VID - /* The lowest and highest voltage allowed for LS1088ARDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - #define PWM_CHANNEL0 0x0 /* @@ -424,7 +417,6 @@ "bootm $load_addr#$BOARD\0" #endif /* CONFIG_TFABOOT */ -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND \ "sf read 0x80001000 0xd00000 0x100000;" \ @@ -446,26 +438,8 @@ #else #if defined(CONFIG_QSPI_BOOT) /* Try to boot an on-QSPI kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND \ - "sf read 0x80001000 0xd00000 0x100000;" \ - "env exists mcinitcmd && env exists secureboot " \ - " && sf read 0x806C0000 0x6C0000 0x100000 " \ - "&& esbc_validate 0x806C0000;env exists mcinitcmd " \ - "&& fsl_mc lazyapply dpl 0x80001000;" \ - "run distro_bootcmd;run qspi_bootcmd;" \ - "env exists secureboot && esbc_halt;" /* Try to boot an on-SD kernel first, then do normal distro boot */ -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND \ - "env exists mcinitcmd && mmcinfo; " \ - "mmc read 0x80001000 0x6800 0x800; " \ - "env exists mcinitcmd && env exists secureboot " \ - " && mmc read 0x806C0000 0x3600 0x20 " \ - "&& esbc_validate 0x806C0000;env exists mcinitcmd " \ - "&& fsl_mc lazyapply dpl 0x80001000;" \ - "run distro_bootcmd;run sd_bootcmd;" \ - "env exists secureboot && esbc_halt;" #endif #endif /* CONFIG_TFABOOT */ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 6d9ae9d..eea6ce5 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -61,11 +61,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ @@ -74,9 +69,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) -/* IFC */ -#define CONFIG_FSL_IFC - /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet @@ -170,19 +162,6 @@ unsigned long long get_qixis_addr(void); "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" -#ifndef CONFIG_TFABOOT -#ifdef CONFIG_SD_BOOT -#define CONFIG_BOOTCOMMAND "mmc read 0x80200000 0x6800 0x800;"\ - " fsl_mc apply dpl 0x80200000 &&" \ - " mmc read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#else -#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ - " cp.b $kernel_start $kernel_load" \ - " $kernel_size && bootm $kernel_load" -#endif -#endif - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 64 /* max command args */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index e67dee0..b0a05dd 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -9,18 +9,13 @@ #include "ls2080a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #ifdef CONFIG_FSL_QSPI #define CONFIG_QIXIS_I2C_ACCESS #define CONFIG_SYS_I2C_IFDR_DIV 0x7e #endif #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 @@ -256,15 +251,7 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON -#endif -#ifdef CONFIG_FSL_QSPI -#define CONFIG_SPI_FLASH_SPANSION -#endif /* * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure. * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0 @@ -285,9 +272,7 @@ unsigned long get_board_sys_clk(void); */ #define RTC #define CONFIG_RTC_DS3231 1 -#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT #define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 54fab54..a54387e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -17,13 +17,7 @@ #define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_VOL_MONITOR_ADDR 0x38 -#define CONFIG_VOL_MONITOR_IR36021_READ -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VID_FLS_ENV "ls2080ardb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif /* step the IR regulator in 5mV increments */ #define IR_VDD_STEP_DOWN 5 #define IR_VDD_STEP_UP 5 @@ -31,12 +25,7 @@ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 @@ -258,9 +247,6 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#if defined(CONFIG_FSL_DSPI) -#define CONFIG_SPI_FLASH_STMICRO -#endif /* * RTC configuration @@ -507,38 +493,12 @@ unsigned long get_board_sys_clk(void); "run distro_bootcmd;run nor_bootcmd; " \ "env exists secureboot && esbc_halt;" #else -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_QSPI_BOOT /* Try to boot an on-QSPI kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND \ - "sf probe 0:0; " \ - "sf read 0x806c0000 0x6c0000 0x40000; " \ - "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x806C0000; " \ - "sf read 0x80d00000 0xd00000 0x100000; " \ - "env exists mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x80d00000; " \ - "run distro_bootcmd;run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;" #elif defined(CONFIG_SD_BOOT) /* Try to boot an on-SD kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND \ - "env exists mcinitcmd && env exists secureboot "\ - "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \ - "&& esbc_validate $load_addr; " \ - "env exists mcinitcmd && run mcinitcmd " \ - "&& mmc read 0x88000000 0x6800 0x800 " \ - "&& fsl_mc lazyapply dpl 0x88000000; " \ - "run distro_bootcmd;run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" #else /* Try to boot an on-NOR kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND \ - "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\ - "&& fsl_mc lazyapply dpl 0x580d00000;" \ - "run distro_bootcmd;run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;" #endif #endif diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 7294a3c..afa0206 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -8,23 +8,8 @@ #define _CONFIG_LSXL_H /* - * Version number information - */ -#if defined(CONFIG_LSCHLV2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg -#elif defined(CONFIG_LSXHL) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg -#else -#error "unknown board" -#endif - -/* * General configuration options */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - -#define CONFIG_KIRKWOOD_GPIO #include "mv-common.h" diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 7173fe6..e285109 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -11,14 +11,12 @@ #include <asm/arch/soc.h> #define CONFIG_REMAKE_ELF -#define CONFIG_FSL_TZPC_BP147 #define CONFIG_FSL_MEMAC #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_FLASH_BASE 0x20000000 /* DDR */ -#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ #define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */ #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL @@ -38,7 +36,6 @@ #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_FSL_DDR_BIST /* enable built-in memory test */ #define CONFIG_SYS_MONITOR_LEN (936 * 1024) /* Miscellaneous configurable options */ @@ -107,7 +104,6 @@ /* PCI */ #ifdef CONFIG_PCI -#define CONFIG_SYS_PCI_64BIT #define CONFIG_PCI_SCAN_SHOW #endif @@ -130,19 +126,7 @@ #endif #endif -/* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index a04bbb6..a07ebeb 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -8,12 +8,6 @@ #include "lx2160a_common.h" -/* VID */ -#define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index 4fd3e54..a8a9f82 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -8,12 +8,6 @@ #include "lx2160a_common.h" -/* VID */ -#define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 4 diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h index 67c469c..c2fa579 100644 --- a/include/configs/lx2162aqds.h +++ b/include/configs/lx2162aqds.h @@ -12,12 +12,6 @@ #undef CONFIG_USB_MAX_CONTROLLER_COUNT #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -/* Voltage monitor on channel 2*/ -#define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index f94cf28..6eb5ec9 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_TIMESTAMP /* Print image info with timestamp */ /* @@ -112,7 +110,6 @@ /* * LCD */ -#define CONFIG_VIDEO_LOGO #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* LVDS display */ @@ -128,7 +125,6 @@ * Boot Linux */ #define CONFIG_BOOTFILE "boot/fitImage" -#define CONFIG_BOOTCOMMAND "run mmc_mmc" /* * NAND SPL @@ -205,9 +201,4 @@ "fi ; " \ "fi\0" -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - #endif /* __M53MENLO_CONFIG_H__ */ diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index 84b998e..b35ba59 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/meson64.h b/include/configs/meson64.h index cb202d5..44f2967 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -29,7 +29,6 @@ #define STDIN_CFG "serial" #endif -#define CONFIG_CPU_ARMV8 #define CONFIG_REMAKE_ELF #define CONFIG_SYS_MAXARGS 32 #define CONFIG_SYS_CBSIZE 1024 diff --git a/include/configs/mt8183.h b/include/configs/mt8183.h index ebd2b32..2b4e976 100644 --- a/include/configs/mt8183.h +++ b/include/configs/mt8183.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> -#define CONFIG_CPU_ARMV8 #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h index 8882a5a..9c443db 100644 --- a/include/configs/mt8512.h +++ b/include/configs/mt8512.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M -#define CONFIG_CPU_ARMV8 - #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/mt8516.h b/include/configs/mt8516.h index 12840b8..47132c1 100644 --- a/include/configs/mt8516.h +++ b/include/configs/mt8516.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> -#define CONFIG_CPU_ARMV8 #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h index 593c6a1..49ee926 100644 --- a/include/configs/mt8518.h +++ b/include/configs/mt8518.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M -#define CONFIG_CPU_ARMV8 - #define COUNTER_FREQUENCY 13000000 /* DRAM definition */ diff --git a/include/configs/mv-plug-common.h b/include/configs/mv-plug-common.h deleted file mode 100644 index d38d987..0000000 --- a/include/configs/mv-plug-common.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009-2015 - * Marvell Semiconductor <www.marvell.com> - */ - -#ifndef _CONFIG_MARVELL_PLUG_H -#define _CONFIG_MARVELL_PLUG_H - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#endif /* _CONFIG_MARVELL_PLUG_H */ diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index b0c78d3..370f000 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -95,18 +95,6 @@ "bootm; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* The rest of the configuration is shared */ #include <configs/mxs.h> diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index bccba5c..552bf5a 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -27,7 +27,6 @@ /* Framebuffer support */ #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) #endif @@ -78,19 +77,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else " \ - "echo ERR: Fail to boot from MMC; " \ - "fi; " \ - "fi; " \ - "else exit; fi" - /* The rest of the configuration is shared */ #include <configs/mxs.h> diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index fe4ea89..caad95b 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -41,7 +41,6 @@ /* Framebuffer support */ #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) #endif @@ -196,18 +195,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* The rest of the configuration is shared */ #include <configs/mxs.h> diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 9cc297d..dc5891e 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -12,8 +12,6 @@ /* High Level Configuration Options */ -#define CONFIG_SYS_FSL_CLK - #include <asm/arch/imx-regs.h> /* @@ -45,7 +43,6 @@ #define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED /* Framebuffer and LCD */ -#define CONFIG_VIDEO_LOGO #define CONFIG_ETHPRIME "FEC0" @@ -108,18 +105,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - #define CONFIG_ARP_TIMEOUT 200UL /* diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index f03e425..16c2241 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -14,8 +14,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_FPGA_COUNT 1 diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index b026c6f..92140df 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_MXC_UART_BASE UART1_BASE /* MMC Configs */ @@ -93,18 +91,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ @@ -146,6 +132,5 @@ #endif /* Framebuffer and LCD */ -#define CONFIG_VIDEO_LOGO #endif /* __CONFIG_H */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index f811881..8f8dfe9 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - /* USB Configs */ #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) @@ -87,12 +85,6 @@ "video-mode=" \ "lcd:800x480-24@60,monitor=lcd\0" \ -#define MMCBOOTCOMMAND \ - "run doquiet; " \ - "run tryboot; " \ - -#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND - #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 0ae8305..5ff931e 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -27,8 +27,6 @@ #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> -#define CONFIG_SYS_FSL_CLK - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index da25336..7d3e651 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -25,7 +25,6 @@ #endif /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 51f6b3a..c1c012b 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -136,20 +136,6 @@ "echo WARNING: Could not determine dtb to use; fi; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "mmc dev ${mmcdev};" \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - #define CONFIG_ARP_TIMEOUT 200UL /* Physical Memory Map */ @@ -167,7 +153,6 @@ /* Environment organization */ /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index e8fd212..3da796d 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -81,19 +81,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h index f2bddd1..0793028 100644 --- a/include/configs/mx6sllevk.h +++ b/include/configs/mx6sllevk.h @@ -76,19 +76,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 12b1783..953f071 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -73,19 +73,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index a554011..8bc8674 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -107,19 +107,6 @@ "if test test $board_rev = REVA ; then " \ "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \ -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ @@ -161,7 +148,6 @@ #ifndef CONFIG_SPL_BUILD #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR #endif diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 0b777fb..c24578a 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -33,8 +33,6 @@ #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -48,7 +46,7 @@ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -108,20 +106,6 @@ "echo WARNING: Could not determine dtb to use; fi; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ @@ -165,7 +149,6 @@ #ifndef CONFIG_SPL_BUILD #if defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index e384d2a..6bcca11 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -30,8 +30,6 @@ #endif #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -44,7 +42,7 @@ "ip_dyn=yes\0" \ "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -105,20 +103,6 @@ "bootz; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ @@ -138,8 +122,6 @@ #define CONFIG_IOMUX_LPSR -#define CONFIG_SOFT_SPI - #ifdef CONFIG_CMD_NET #define CONFIG_FEC_ENET_DEV 1 #if (CONFIG_FEC_ENET_DEV == 0) diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index ffe8c75..2e976df 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -17,7 +17,6 @@ #define CONFIG_MXC_GPT_HCLK #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ #define COUNTER_FREQUENCY CONFIG_SC_TIMER_CLK -#define CONFIG_SYS_FSL_CLK #define CONFIG_SYS_BOOTM_LEN 0x1000000 diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index f11e2e3..d5b38fd 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -17,8 +17,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #ifdef CONFIG_IMX_BOOTAUX /* Set to QSPI1 A flash at default */ #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000 @@ -125,7 +123,6 @@ #define CONFIG_USBD_HS #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index 58d48ed..8c4d942 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -25,7 +25,6 @@ */ #define CONFIG_BOARD_SIZE_LIMIT 785408 #define CONFIG_MMCROOT "/dev/mmcblk0p2" -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE @@ -48,7 +47,7 @@ "fdt_file=imx7ulp-com.dtb\0" \ "fdt_addr=0x63000000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 4046c3f..8f2cbc6 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_BOOTM_LEN 0x1000000 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE @@ -48,7 +47,7 @@ "earlycon=lpuart32,0x402D0010\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -100,17 +99,6 @@ "bootz; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE SZ_256K diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 99b14ba..815f81f 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -11,12 +11,6 @@ #ifndef _CONFIG_NAS220_H #define _CONFIG_NAS220_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ -#define CONFIG_KW88F6192 /* SOC Name */ - /* power-on led, regulator, sata0, sata1 */ #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) #define NAS220_GE_OE_VAL_HIGH (0) @@ -40,7 +34,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=console=ttyS0,115200\0" \ @@ -61,15 +54,7 @@ #endif /* CONFIG_CMD_NET */ /* - * File system - */ -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_LZO - -/* * EFI partition */ -#define CONFIG_KIRKWOOD_GPIO - #endif /* _CONFIG_NAS220_H */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index b37e054..adfc055 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -21,7 +21,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap.h> @@ -75,7 +74,6 @@ * Framebuffer */ /* Video console */ -#define CONFIG_VIDEO_LOGO #define VIDEO_FB_16BPP_PIXEL_SWAP #define VIDEO_FB_16BPP_WORD_SWAP @@ -168,12 +166,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); "echo run attachboot - Boot attached kernel image.;" \ "echo" -#define CONFIG_BOOTCOMMAND \ - "run sdboot;" \ - "run emmcboot;" \ - "run attachboot;" \ - "echo" - /* * OMAP3 has 12 GP timers, they can be driven by the system clock * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). diff --git a/include/configs/novena.h b/include/configs/novena.h index 28fb1b8..1ce2f4e 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -9,7 +9,6 @@ #define __CONFIG_H /* System configurations */ -#define CONFIG_KEYBOARD #include "mx6_common.h" @@ -87,7 +86,6 @@ #endif /* Video output */ -#define CONFIG_VIDEO_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 950549c..8cc9ca6 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -9,25 +9,11 @@ #ifndef _CONFIG_NSA310S_H #define _CONFIG_NSA310S_H -/* high level configuration options */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6192 1 /* SOC Name */ -#define CONFIG_KW88F6702 1 /* SOC Name */ - #include "mv-common.h" /* environment variables configuration */ /* default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x700000 ${fdt}; " \ - "ubifsumount; " \ - "fdt addr 0x700000; fdt resize; fdt chosen; " \ - "bootz 0x800000 - 0x700000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ @@ -50,9 +36,4 @@ #define CONFIG_LBA48 #endif /* CONFIG_SATA */ -/* RTC driver configuration */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_NSA310S_H */ diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index bc21b79..536dff2 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -7,8 +7,6 @@ #ifndef __OCTEONTX2_COMMON_H__ #define __OCTEONTX2_COMMON_H__ -#define CONFIG_SUPPORT_RAW_INITRD - /** Maximum size of image supported for bootm (and bootable FIT images) */ #define CONFIG_SYS_BOOTM_LEN (256 << 20) @@ -43,7 +41,6 @@ #if defined(CONFIG_MMC_OCTEONTX) #define MMC_SUPPORTS_TUNING /** EMMC specific defines */ -#define CONFIG_SUPPORT_EMMC_RPMB #endif #endif /* __OCTEONTX2_COMMON_H__ */ diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 46908be..8185f4b 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -61,12 +61,6 @@ # define CONFIG_SYS_64BIT_LBA #endif -/***** SPI Defines *********/ -#ifdef CONFIG_DM_SPI_FLASH -# define CONFIG_SF_DEFAULT_BUS 0 -# define CONFIG_SF_DEFAULT_CS 0 -#endif - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE @@ -76,9 +70,6 @@ #define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192 /** EMMC specific defines */ -#if defined(CONFIG_MMC_OCTEONTX) -#define CONFIG_SUPPORT_EMMC_RPMB -#endif #if defined(CONFIG_NAND_OCTEONTX) /*#define CONFIG_MTD_CONCAT */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 281922a..ed9b41d 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -13,7 +13,6 @@ #include <configs/exynos4-common.h> -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -28,8 +27,6 @@ #include <linux/sizes.h> -#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run autoboot" - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 70481b5..a482598 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -80,8 +80,6 @@ * Need to override existing one (smdk5420) with odroid so set_board_info will * use proper prefix when creating full board_name (SYS_BOARD + type) */ -#undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "odroid" /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index e71f737..211f39a 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -142,9 +142,6 @@ "nandboot=run nandbootcommon; "\ "bootm ${loadaddr} - ${fdtaddr}\0"\ -#define CONFIG_BOOTCOMMAND \ - "run autoboot" - /* Miscellaneous configurable options */ /* memtest works on */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index f2352d8..45297b9 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -17,7 +17,6 @@ /* * SoC Configuration */ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) @@ -161,9 +160,6 @@ * Linux Information */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_BOOTCOMMAND \ - "run envboot; " \ - "run mmcboot; " #define DEFAULT_LINUX_BOOT_ENV \ "loadaddr=0xc0700000\0" \ diff --git a/include/configs/openpiton-riscv64.h b/include/configs/openpiton-riscv64.h index c9d966ff..75b48f8 100644 --- a/include/configs/openpiton-riscv64.h +++ b/include/configs/openpiton-riscv64.h @@ -43,11 +43,4 @@ "mmcdev=0\0" \ "mmcpart=1\0" -#define CONFIG_USE_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "fdt addr ${fdtcontroladdr}; " \ - "fdt move ${fdtcontroladdr} ${fdt_addr_r}; " \ - "load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; " \ - "booti ${kernel_addr_r} - ${fdt_addr_r}; " - #endif/* __CONFIG_H */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 56bfe87..43d0896 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -13,12 +13,6 @@ #ifndef _CONFIG_OPENRD_H #define _CONFIG_OPENRD_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - #include "mv-common.h" /* @@ -37,9 +31,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \ CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index d9311a4..ac8eb05 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -41,7 +41,6 @@ /* LCD */ #ifndef CONFIG_SPL_BUILD #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif @@ -54,7 +53,6 @@ #define ACFG_CONSOLE_DEV ttymxc0 #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" -#define CONFIG_BOOTCOMMAND "run emmcboot" #define CONFIG_EXTRA_ENV_SETTINGS \ "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \ diff --git a/include/configs/origen.h b/include/configs/origen.h index 881df2d..1caeed6 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -45,22 +45,6 @@ "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "fi; " \ - "fi;" \ - "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " #define CONFIG_CLK_1000_400_200 diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 6b4fc39..2e1331b 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -102,12 +102,10 @@ #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_TPL_TEXT_BASE 0xf8f81000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE @@ -116,7 +114,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) #endif /* not CONFIG_TPL_BUILD */ #define CONFIG_SPL_PAD_TO 0x20000 @@ -130,7 +127,7 @@ #ifndef CONFIG_SYS_MONITOR_BASE #ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE 0xf8f81000 #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else @@ -140,17 +137,10 @@ #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_LBA48 -#if defined(CONFIG_TARGET_P2020RDB) -#define CONFIG_SYS_CLK_FREQ 100000000 -#else -#define CONFIG_SYS_CLK_FREQ 66666666 -#endif - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. @@ -352,22 +342,6 @@ OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ OR_GPCM_EAD) -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#ifdef CONFIG_NAND_FSL_ELBC -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif -#endif -#define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ -#define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ - /* Vsc7385 switch */ #ifdef CONFIG_VSC7385_ENET #define __VSCFW_ADDR "vscfw_addr=ef000000" @@ -385,9 +359,6 @@ OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM - /* The size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE_SIZE 8192 #endif @@ -553,7 +524,6 @@ #if defined(CONFIG_HAS_FSL_DR_USB) #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL #endif #endif @@ -565,8 +535,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #endif -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -646,23 +614,6 @@ __stringify(__SD_RST_CMD)"\0" \ __stringify(__NAND_RST_CMD)"\0" \ __stringify(__PCIE_RST_CMD)"\0" -#define NFSBOOTCOMMAND \ -"setenv bootargs root=/dev/nfs rw " \ -"nfsroot=$serverip:$rootpath " \ -"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"tftp $loadaddr $bootfile;" \ -"tftp $fdtaddr $fdtfile;" \ -"bootm $loadaddr - $fdtaddr" - -#define HDBOOT \ -"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"usb start;" \ -"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ -"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ -"bootm $loadaddr - $fdtaddr" - #define CONFIG_USB_FAT_BOOT \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs " \ @@ -688,15 +639,4 @@ __stringify(__PCIE_RST_CMD)"\0" "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ "bootm $norbootaddr - $norfdtaddr" -#define RAMBOOTCOMMAND \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"tftp $ramdiskaddr $ramdiskfile;" \ -"tftp $loadaddr $bootfile;" \ -"tftp $fdtaddr $fdtfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND HDBOOT - #endif /* __CONFIG_H */ diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index 7f05beb..b03d3a4 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -24,12 +24,8 @@ func(DHCP, dhcp, na) /* Environment at end of QSPI, in the VER partition */ -#define CONFIG_ENV_SPI_MAX_HZ 48000000 -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#define CONFIG_PREBOOT - #define BOARD_EXTRA_ENV_SETTINGS \ "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h index 0e047df..068fc7d 100644 --- a/include/configs/pcl063_ull.h +++ b/include/configs/pcl063_ull.h @@ -83,8 +83,6 @@ "fit_addr=0x82000000\0" \ ENV_MMC -#define CONFIG_BOOTCOMMAND "run mmc_mmc_fit" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 244d373..fd4a0b1 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -25,12 +25,6 @@ #define PCM052_EXTRA_ENV_SETTINGS #endif -/* if no target-specific boot command was defined by the target, - define an empty one */ -#ifndef PCM052_BOOTCOMMAND -#define PCM052_BOOTCOMMAND -#endif - /* if no target-specific extra environment settings were defined by the target, define an empty one */ #ifndef PCM052_NET_INIT @@ -38,7 +32,6 @@ #endif /* boot command, including the target-defined one if any */ -#define CONFIG_BOOTCOMMAND PCM052_BOOTCOMMAND "run bootcmd_nand" /* Extra env settings (including the target-defined ones if any) */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h index a0bb2b5..4d4185b 100644 --- a/include/configs/pcm058.h +++ b/include/configs/pcm058.h @@ -56,6 +56,4 @@ "optargs=rw rootwait\0" \ ENV_MMC \ ENV_NAND - -#define CONFIG_BOOTCOMMAND "run mmcboot;run nandboot" #endif diff --git a/include/configs/pdu001.h b/include/configs/pdu001.h index 3d18747..7ab6a89 100644 --- a/include/configs/pdu001.h +++ b/include/configs/pdu001.h @@ -32,19 +32,6 @@ #define CONSOLE_DEV "ttyO5" #endif -#define CONFIG_BOOTCOMMAND \ - "run eval_boot_device;" \ - "part uuid mmc ${mmc_boot}:${root_fs_partition} root_fs_partuuid;" \ - "setenv bootargs console=${console} " \ - "vt.global_cursor_default=0 " \ - "root=PARTUUID=${root_fs_partuuid} " \ - "rootfstype=ext4 " \ - "rootwait " \ - "rootdelay=1;" \ - "fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};" \ - "fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};" \ - "bootz ${loadaddr} - ${fdtaddr}" - #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 38c8a83..7438d0a 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -39,7 +37,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "ip_dyn=yes\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=2\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -70,14 +68,6 @@ "echo WARN: Cannot load the DT; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi;" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -105,6 +95,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __PHYCORE_IMX8MM_H */ diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index fcd5896..8c5ffee 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (152 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -39,7 +37,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "ip_dyn=yes\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=2\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -70,14 +68,6 @@ "echo WARN: Cannot load the DT; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi;" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -105,6 +95,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __PHYCORE_IMX8MP_H */ diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index a83e49f..3624c12 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -33,9 +33,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) -#define CONFIG_SYS_ENV_ADDR 0x88300000 -#define CONFIG_SYS_FDT_ADDR 0x89d00000 - /* Memory Test */ /*---------------------------------------------------------------------- @@ -74,8 +71,8 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ - "fdt_addr_r="__stringify(CONFIG_SYS_FDT_ADDR)"\0" \ - "scriptaddr="__stringify(CONFIG_SYS_ENV_ADDR)"\0" + "fdt_addr_r=0x89d00000\0" \ + "scriptaddr=0x88300000\0" \ #define CONFIG_LEGACY_BOOTCMD_ENV \ "legacy_bootcmd= " \ @@ -99,7 +96,4 @@ CONFIG_LEGACY_BOOTCMD_ENV \ BOOTENV -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "run distro_bootcmd || run legacy_bootcmd" - #endif /* __PIC32MZDASK_CONFIG_H */ diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h index 2528d31..1995562 100644 --- a/include/configs/pico-imx6.h +++ b/include/configs/pico-imx6.h @@ -136,7 +136,6 @@ #define CONFIG_FEC_MXC_PHYADDR 1 /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 3fe1783..03e4801 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -64,8 +64,6 @@ "bootmenu_2=Boot using PICO-Pi baseboard=" \ "setenv fdtfile imx6ul-pico-pi.dtb\0" \ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -133,7 +131,6 @@ #define CONFIG_BOARD_SIZE_LIMIT 715776 #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index cbac950..8c0b8c0 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -65,9 +65,6 @@ BOOTENV #endif - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ "splashpos=m,m\0" \ @@ -124,7 +121,6 @@ #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 5c1b652..2293a29 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -56,7 +54,7 @@ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -82,18 +80,6 @@ "${get_cmd} ${loadaddr} ${image}; " \ "booti; " -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -109,10 +95,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR /* Monitor Command Prompt */ @@ -125,12 +107,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #define CONFIG_SYS_BOOTM_LEN SZ_128M #endif diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 7fc06e8..9a4a632 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index d530107..be24d82 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -179,14 +179,10 @@ #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x210000; " \ - "bootm 0x22000000" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" #elif defined (CONFIG_SYS_USE_FLASH) /* JFFS Partition offset set */ @@ -196,8 +192,6 @@ /* 512k reserved for u-boot */ #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 -#define CONFIG_BOOTCOMMAND "run flashboot" - #define CONFIG_CON_ROT "fbcon=rotate:3 " #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 8089993..e9eb736 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -179,11 +179,6 @@ #endif -#define CONFIG_JFFS2_NAND 1 -#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ -#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/ - /* PSRAM */ #define PHYS_PSRAM 0x70000000 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ @@ -209,14 +204,10 @@ #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ /* JFFS Partition offset set */ @@ -226,7 +217,6 @@ /* 512k reserved for u-boot */ #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 -#define CONFIG_BOOTCOMMAND "run flashboot" #define CONFIG_ROOTPATH "/ronetix/rootfs" #define CONFIG_CON_ROT "fbcon=rotate:3 " diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 3d039b6..b205391 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_NAND_MASK_CLE BIT(22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD3 -#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT #endif /* Ethernet */ @@ -54,16 +53,8 @@ #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ - -#define CONFIG_BOOTCOMMAND \ - "nand read 0x70000000 0x200000 0x300000;" \ - "bootm 0x70000000" #elif CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in mmc */ - -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ - "fatload mmc 0:1 0x72000000 zImage; " \ - "bootz 0x72000000 - 0x71000000" #endif /* Defines for SPL */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index f49bcfb..3e94125 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -12,12 +12,6 @@ #ifndef _CONFIG_POGO_E02_H #define _CONFIG_POGO_E02_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* @@ -27,10 +21,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs $(bootargs_console); " \ - "run bootcmd_usb; " \ - "bootm 0x00800000 0x01100000" #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ diff --git a/include/configs/porter.h b/include/configs/porter.h index 7ffcf5f..867dada 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -35,8 +35,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 3df5143..928ccb1 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -10,8 +10,6 @@ #define CONFIG_REMAKE_ELF -#define CONFIG_SUPPORT_RAW_INITRD - #define CONFIG_SYS_INIT_SP_ADDR 0x00100000 #define CONFIG_SYS_BOOTM_LEN 0x00c00000 diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index a333326..753fc14 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -71,44 +71,11 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ - "if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ - "fi; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmc_dev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmc_load_uimage; then " \ - "run mmc_args;" \ - "bootm ${kloadaddr};" \ - "fi;" \ - "fi;" \ - "run nand_boot;" \ - "reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #if defined(CONFIG_VIDEO) #define CONFIG_VIDEO_DA8XX -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE #define PWM_TICKS 0x1388 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index f79e0fe..e257c0e 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - #define CONFIG_ENABLE_36BIT_PHYS /* Needed to fill the ccsrbar pointer */ @@ -47,8 +45,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_CHIP_SELECTS_PER_CTRL 0 -#define CONFIG_SYS_CLK_FREQ 33000000 - #define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE @@ -100,7 +96,4 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ -#define CONFIG_BOOTCOMMAND \ - "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr\0" - #endif /* __QEMU_PPCE500_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 58ca6c2..8e86830 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -1,7 +1,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_CPU_SH7751 1 #define __LITTLE_ENDIAN__ 1 /* SCIF */ @@ -29,7 +28,6 @@ /* * SuperH Clock setting */ -#define CONFIG_SYS_CLK_FREQ 60000000 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /* @@ -44,7 +42,6 @@ #define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ -#define CONFIG_IDE_SWAP_IO /* * SuperH PCI Bridge Configration diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index de8ea8b..8e20a44 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -57,24 +57,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_RASTABAN_H */ diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 595482c..f1f5d07 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -42,6 +42,6 @@ #define CONFIG_TMU_TIMER #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (CONFIG_SYS_CLK_FREQ / 8) +#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 8) #endif /* __RCAR_GEN2_COMMON_H */ diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 2b3e1bb..eed2125 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -55,11 +55,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" -#define CONFIG_BOOTCOMMAND \ - "tftp 0x48080000 Image; " \ - "tftp 0x48000000 Image-"CONFIG_DEFAULT_FDT_FILE"; " \ - "booti 0x48080000 - 0x48000000" - /* SPL support */ #if defined(CONFIG_R8A7795) || defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965) #define CONFIG_SPL_BSS_START_ADDR 0xe633f000 diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index b133d8e..00c453d 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -12,7 +12,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index 8b7a0bb..97cacea 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -13,7 +13,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_IRAM_BASE 0x10080000 diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index e7c0964..7449e81 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -22,7 +22,6 @@ /* spl size 32kb sram - 2kb bootrom */ #define CONFIG_SPL_MAX_SIZE (0x8000 - 0x800) -#define CONFIG_ROCKCHIP_SERIAL 1 #define CONFIG_SPL_STACK 0x10087fff diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index a46b1ff..ef55ef0 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -13,7 +13,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x110d0020 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x61100000 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index abbb273..490da7c 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -15,7 +15,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0xff810020 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h index 496f462..1664707 100644 --- a/include/configs/rk3308_common.h +++ b/include/configs/rk3308_common.h @@ -12,7 +12,6 @@ #define CONFIG_SPL_MAX_SIZE 0x20000 #define CONFIG_SPL_BSS_START_ADDR 0x00400000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_NS16550_MEM32 diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 4c5c1ac..d5e064f 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -44,7 +44,6 @@ /* GPIO */ #define CONFIG_BCM2835_GPIO /* LCD */ -#define CONFIG_LCD_DT_SIMPLEFB #define CONFIG_VIDEO_BCM2835 /* DFU over USB/UDC */ diff --git a/include/configs/rut.h b/include/configs/rut.h index 68d68d0..02d330e 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -63,41 +63,12 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmc_dev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmc_load_uimage; then " \ - "run mmc_args;" \ - "bootm ${kloadaddr};" \ - "fi;" \ - "fi;" \ - "run nand_boot;" \ - "reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #if defined(CONFIG_VIDEO) #define CONFIG_VIDEO_DA8XX -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 2e94613..632fc0c 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -104,16 +104,6 @@ (void *)PHY_BASEADDR_UART3} /*----------------------------------------------------------------------- - * PLL - */ -#define CONFIG_SYS_PLLFIN 24000000UL - -/*----------------------------------------------------------------------- - * Timer - */ -#define CONFIG_TIMER_SYS_TICK_CH 0 - -/*----------------------------------------------------------------------- * BACKLIGHT */ #ifndef CONFIG_S5P4418_ONEWIRE @@ -131,8 +121,6 @@ * VIDEO */ -#define CONFIG_VIDEO_LOGO - #ifdef CONFIG_VIDEO_LOGO #ifdef CONFIG_SPLASH_SCREEN #define SPLASH_FILE logo.bmp diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index b4a3cc0..e3b091a 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -18,9 +18,6 @@ #include <linux/sizes.h> #include <asm/arch/cpu.h> /* get chip and board defs */ -/* input clock of PLL: has 24MHz input clock at S5PC110 */ -#define CONFIG_SYS_CLK_FREQ_C110 24000000 - /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 @@ -70,8 +67,6 @@ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ -#define CONFIG_BOOTCOMMAND "run mmcboot" - #define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \ " ${console} ${meminfo}" diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index ff29de0..29adab3 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -14,7 +14,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ /* Keep L2 Cache Disabled */ -#define CONFIG_SYS_L2CACHE_OFF 1 /* Universal has 2 banks of DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -22,8 +21,6 @@ #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_BOOTCOMMAND "run mmcboot" - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) @@ -106,11 +103,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG_PHY -/* - * SPI Settings - */ -#define CONFIG_SOFT_SPI - #ifndef __ASSEMBLY__ void universal_spi_scl(int bit); void universal_spi_sda(int bit); diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 1eafff1..c29b34e 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -23,7 +23,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index df30d48..eb96e50 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -50,24 +50,12 @@ #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in sd card */ -#define CONFIG_BOOTCOMMAND \ - "fatload mmc 0:1 0x21000000 at91-sam9x60ek.dtb;" \ - "fatload mmc 0:1 0x22000000 zImage;" \ - "bootz 0x22000000 - 0x21000000" #elif defined(CONFIG_NAND_BOOT) /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read " \ - "0x22000000 0x200000 0x600000; " \ - "nand read 0x21000000 0x180000 0x20000; " \ - "bootz 0x22000000 - 0x21000000" #elif defined(CONFIG_QSPI_BOOT) /* bootstrap + u-boot + env + linux in SPI NOR flash */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x180000 0x80000; " \ - "sf read 0x22000000 0x200000 0x600000; " \ - "bootz 0x22000000 - 0x21000000" #endif #endif diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index 1c30e44..f7d8fb6 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -21,13 +21,8 @@ (0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env in sd card */ -#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 " \ - CONFIG_DEFAULT_DEVICE_TREE ".dtb; " \ - "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x23000000 zImage; " \ - "bootz 0x23000000 - 0x22000000" #endif /* SPL */ diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index 53113f0..c3a5c2a 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -25,21 +25,12 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -/* NAND flash */ - -/* SPI flash */ -#define CONFIG_SF_DEFAULT_SPEED 66000000 - -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_SD_BOOT /* u-boot env in sd/mmc card */ #define FAT_ENV_INTERFACE "mmc" #define FAT_ENV_DEVICE_AND_PART "0" #define FAT_ENV_FILE "uboot.env" /* bootstrap + u-boot + env in sd card */ -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" #endif /* SPL */ diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index da573bc..11c13c6 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -23,31 +23,10 @@ #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env in sd card */ -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 at91-sama5d2_xplained.dtb; " \ - "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x23000000 zImage; " \ - "bootz 0x23000000 - 0x22000000" #elif CONFIG_SPI_BOOT /* bootstrap + u-boot + env in sd card, but kernel + dtb in eMMC */ -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTCOMMAND "ext4load mmc 0:1 0x22000000 /boot/at91-sama5d2_xplained.dtb; " \ - "ext4load mmc 0:1 0x23000000 /boot/zImage; " \ - "bootz 0x23000000 - 0x22000000" - -#endif - -#ifdef CONFIG_QSPI_BOOT -#undef CONFIG_ENV_SPI_BUS -#undef CONFIG_BOOTCOMMAND -#define CONFIG_ENV_SPI_BUS 1 -#define CONFIG_BOOTCOMMAND "sf probe 1:0; " \ - "sf read 0x22000000 0x180000 0x80000; " \ - "sf read 0x23000000 0x200000 0x600000; "\ - "bootz 0x23000000 - 0x22000000" #endif diff --git a/include/configs/sama7g5ek.h b/include/configs/sama7g5ek.h index 9b7cc2c..2aec9ff 100644 --- a/include/configs/sama7g5ek.h +++ b/include/configs/sama7g5ek.h @@ -24,20 +24,6 @@ GENERATED_GBL_DATA_SIZE) #endif -#ifndef CONFIG_BOOTCOMMAND -#ifdef CONFIG_SD_BOOT -/* u-boot env in sd/mmc card */ - -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x61000000 at91-sama7g5ek.dtb; " \ - "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x62000000 zImage; " \ - "bootz 0x62000000 - 0x61000000" -#else -#define CONFIG_BOOTCOMMAND "Place your bootcommand here" -#endif - -#endif - #define CONFIG_ARP_TIMEOUT 200 #define CONFIG_NET_RETRY_COUNT 50 diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index d614b70..cd7d99e 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -10,24 +10,10 @@ #define CONFIG_IO_TRACE #endif -#ifndef CONFIG_TIMER -#define CONFIG_SYS_TIMER_RATE 1000000 -#endif - -#define CONFIG_HOST_MAX_DEVICES 4 - #define CONFIG_MALLOC_F_ADDR 0x0010000 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* turn on command-line edit/c/auto */ - -/* SPI - enable all SPI flash types for testing purposes */ - -#define CONFIG_SYS_FDT_LOAD_ADDR 0x100 - -#define CONFIG_PHYSMEM - /* Size of our emulated memory */ #define SB_CONCAT(x, y) x ## y #define SB_TO_UL(s) SB_CONCAT(s, UL) @@ -39,16 +25,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define BOOT_TARGET_DEVICES(func) \ - func(HOST, host, 1) \ - func(HOST, host, 0) - -#ifdef __ASSEMBLY__ -#define BOOTENV -#else -#include <config_distro_bootcmd.h> -#endif - #define CONFIG_KEEP_SERVERADDR #define CONFIG_UDP_CHECKSUM #define CONFIG_TIMESTAMP @@ -58,44 +34,6 @@ #define CONFIG_SANDBOX_SDL #endif -/* LCD and keyboard require SDL support */ -#ifdef CONFIG_SANDBOX_SDL -#define LCD_BPP LCD_COLOR16 -#define CONFIG_LCD_BMP_RLE8 - -#define CONFIG_KEYBOARD - -#define SANDBOX_SERIAL_SETTINGS "stdin=serial,cros-ec-keyb,usbkbd\0" \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" -#else -#define SANDBOX_SERIAL_SETTINGS "stdin=serial\0" \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" -#endif - -#define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \ - "eth2addr=00:00:11:22:33:48\0" \ - "eth3addr=00:00:11:22:33:45\0" \ - "eth4addr=00:00:11:22:33:48\0" \ - "eth5addr=00:00:11:22:33:46\0" \ - "eth6addr=00:00:11:22:33:47\0" \ - "ipaddr=1.2.3.4\0" - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0x10000000\0" \ - "kernel_addr_r=0x1000000\0" \ - "fdt_addr_r=0xc00000\0" \ - "ramdisk_addr_r=0x2000000\0" \ - "scriptaddr=0x1000\0" \ - "pxefile_addr_r=0x2000\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - SANDBOX_SERIAL_SETTINGS \ - SANDBOX_ETH_SETTINGS \ - BOOTENV \ - MEM_LAYOUT_ENV_SETTINGS - #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_ATA_IDE0_OFFSET 0 diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index c51517a..e6c200f 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -27,7 +27,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ /* NAND support */ -#define CONFIG_TEGRA_NAND /* Max number of NAND devices */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index e28f984..8dba4fc 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -9,12 +9,7 @@ #ifndef _CONFIG_SHEEVAPLUG_H #define _CONFIG_SHEEVAPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations @@ -32,9 +27,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT \ diff --git a/include/configs/siemens-ccp-common.h b/include/configs/siemens-ccp-common.h deleted file mode 100644 index 01051c8..0000000 --- a/include/configs/siemens-ccp-common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* Be very careful updating CONFIG_IDENT_STRING - * This string will control the update flow whether an U-Boot should be - * updated or not. If the version of installed U-Boot (in flash) is smaller - * than the version to be installed (from update file), an update will - * be performed. - * - * General rules: - * 1. First 4 characters ' ##v' or IDENT_MAGIC represent kind of a magic number - * to identify the following strings after easily. Don't change them! - * - * 2. First 2 digits after 'v' or CCP_MAJOR are updated with U-Boot version - * change, e.g. from 2015.04 to 2018.03 - * - * 3. Second 2 digits after '.' or CCP_MINOR are updated if we want to upgrade - * U-Boot within an U-Boot version. - */ -#define CCP_IDENT_MAGIC " ##v" -#define GENERATE_CCP_VERSION(MAJOR, MINOR) CCP_IDENT_MAGIC MAJOR "." MINOR diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index 8535678..920f314 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -74,10 +74,6 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTENV \ BOOTENV_SF - -#define CONFIG_PREBOOT \ - "setenv fdt_addr ${fdtcontroladdr};" \ - "fdt addr ${fdtcontroladdr};" #endif #endif /* __CONFIG_H */ diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index f68d7d7..30adfe9 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -32,8 +32,6 @@ #define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit resources */ - #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 /* Environment options */ @@ -72,10 +70,6 @@ "partitions=" PARTS_DEFAULT "\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTENV - -#define CONFIG_PREBOOT \ - "setenv fdt_addr ${fdtcontroladdr};" \ - "fdt addr ${fdtcontroladdr};" #endif /* CONFIG_SPL_BUILD */ #define CONFIG_SYS_EEPROM_BUS_NUM 0 diff --git a/include/configs/silk.h b/include/configs/silk.h index eee60fd..29350a6 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -35,8 +35,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/slimbootloader.h b/include/configs/slimbootloader.h index b816907..ff0ed18 100644 --- a/include/configs/slimbootloader.h +++ b/include/configs/slimbootloader.h @@ -35,15 +35,5 @@ /* * Override CONFIG_BOOTCOMMAND in x86-common.h */ -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "if test ${bootdev} = \"usb\"; then ${bootdev} start; fi; " \ - "if test ${bootdev} = \"scsi\"; then ${bootdev} scan; fi; " \ - "${bootdev} info; " \ - "${bootfsload} ${bootdev} ${bootdevnum}:${bootdevpart} " \ - "${loadaddr} ${bootfile}; " \ - "${bootfsload} ${bootdev} ${bootdevnum}:${bootdevpart} " \ - "${ramdiskaddr} ${ramdiskfile}; " \ - "zboot ${loadaddr} 0 ${ramdiskaddr} ${filesize}" #endif /* __SLIMBOOTLOADER_CONFIG_H__ */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 7ce3aea..8bfd1fc 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -91,11 +91,6 @@ /* BOOTP and DHCP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define NFSBOOTCOMMAND \ - "setenv autoload yes; setenv autoboot yes; " \ - "setenv bootargs ${basicargs} ${mtdparts} " \ - "root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; " \ - "dhcp" #if !defined(CONFIG_SPL_BUILD) /* USB configuration */ @@ -116,7 +111,6 @@ #endif /* General Boot Parameter */ -#define CONFIG_BOOTCOMMAND "run flashboot" #define CONFIG_SYS_CBSIZE 512 /* diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 3af1367..d7e86f2 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -14,7 +14,6 @@ #undef CONFIG_EXYNOS_FB #undef CONFIG_EXYNOS_DP -#undef CONFIG_KEYBOARD #define CONFIG_BOARD_COMMON diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index d06dfe4..38691b6 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -15,8 +15,6 @@ #undef CONFIG_EXYNOS_FB #undef CONFIG_EXYNOS_DP -#undef CONFIG_KEYBOARD - #define CONFIG_BOARD_COMMON #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index a5edf04..28ff48b 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -22,7 +22,6 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ /* input clock of PLL: SMDKC100 has 12MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 12000000 /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 @@ -36,8 +35,6 @@ /* PWM */ #define CONFIG_PWM 1 -#define CONFIG_BOOTCOMMAND "run ubifsboot" - #define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ " console=ttySAC0,115200n8" \ " mem=128M" diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 4a6b625..f113fa4 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -26,8 +26,6 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x00002488 -#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" - /* SMDKV310 has 4 bank of DRAM */ #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index bbdd42b..a7f7756 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -16,7 +16,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ @@ -36,11 +35,6 @@ "bootz ${loadaddr} - ${fdt_addr}; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "if run loadimage; then " \ - "run mmcboot; " \ - "fi; " \ - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index de918e7..3889a88 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -45,9 +45,6 @@ #define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_TFTP_PORT -/* MMC */ -#define CONFIG_GENERIC_ATMEL_MCI - /* LCD */ #define CONFIG_ATMEL_LCD #define CONFIG_GURNARD_SPLASH diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 7c563b7..ca3da95 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -102,16 +102,4 @@ * Boot */ -#define CONFIG_BOOTCOMMAND \ - "setenv boot_mmc_part ${kernel_mmc_part}; " \ - "if test reboot-${reboot-mode} = reboot-r; then " \ - "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \ - "if test reboot-${reboot-mode} = reboot-b; then " \ - "echo fastboot; fastboot 0; fi; " \ - "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \ - "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \ - "mmc dev ${boot_mmc_dev}; " \ - "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \ - "bootm ${kernel_addr_r};" - #endif diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 21e70c2..0935eae 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -27,19 +27,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "zImage" -#define CONFIG_BOOTCOMMAND \ - "setenv bootcmd '" \ - "bridge enable; " \ - "if test ${bootnum} = \"b\"; " \ - "then run _fpga_loadsafe; " \ - "else if test ${bootcount} -eq 4; then echo \"Switching copy...\"; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; " \ - "run _fpga_loaduser; " \ - "fi;" \ - "echo \"Booting bank $bootnum\" && run userload && run userboot;" \ - "' && " \ - "setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && " \ - "saveenv && saveenv && boot;" - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Environment settings */ @@ -108,7 +95,4 @@ /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> -#undef CONFIG_WATCHDOG_TIMEOUT_MSECS -#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000 - #endif /* __CONFIG_SOCFPGA_SECU1_H__ */ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 31f95f5..155aece 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -187,10 +187,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif -#else -#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 -#endif #endif /* SPL QSPI boot support */ diff --git a/include/configs/socfpga_dbm_soc1.h b/include/configs/socfpga_dbm_soc1.h index 137da2f..8acddbe 100644 --- a/include/configs/socfpga_dbm_soc1.h +++ b/include/configs/socfpga_dbm_soc1.h @@ -12,7 +12,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTCOMMAND "run mmc_mmc" /* Environment is in MMC */ diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index 1456214..3aa231c 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -12,7 +12,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTCOMMAND "run mmc_mmc" /* Environment is in MMC */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 4d7072c..928582a 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -60,7 +60,6 @@ /* Flash device info */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nor0=ff705000.spi.0" #endif /* CONFIG_SPL_BUILD */ @@ -148,7 +147,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); * L4 Watchdog */ #ifndef CONFIG_SPL_BUILD -#undef CONFIG_HW_WATCHDOG #undef CONFIG_DESIGNWARE_WATCHDOG #endif #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index d9d0a4a..d767492 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -12,7 +12,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTCOMMAND "run selboot" #define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MiB */ /* Extra Environment */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 454dbd3..15e93d0 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -38,10 +38,6 @@ * in the README.mpc85xxads. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 66666666 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -97,11 +93,6 @@ #define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */ -#define CONFIG_SYS_BR0_PRELIM 0xfe001001 /* port size 16bit */ -#define CONFIG_SYS_OR0_PRELIM 0xfe000030 /* 32MB Flash */ -#define CONFIG_SYS_BR1_PRELIM 0xfc001001 /* port size 16bit */ -#define CONFIG_SYS_OR1_PRELIM 0xfe000030 /* 32MB Flash */ - #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM @@ -128,8 +119,6 @@ #define CONFIG_SYS_FPGA_BASE 0xc0000000 #define CONFIG_SYS_FPGA_SIZE 0x00100000 /* 1 MB */ #define CONFIG_SYS_HMI_BASE 0xc0010000 -#define CONFIG_SYS_BR3_PRELIM 0xc0001881 /* UPMA, 32-bit */ -#define CONFIG_SYS_OR3_PRELIM 0xfff00000 /* 1 MB */ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_FPGA_BASE + 0x70) #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -137,8 +126,6 @@ /* LIME GDC */ #define CONFIG_SYS_LIME_BASE 0xc8000000 #define CONFIG_SYS_LIME_SIZE 0x04000000 /* 64 MB */ -#define CONFIG_SYS_BR2_PRELIM 0xc80018a1 /* UPMB, 32-bit */ -#define CONFIG_SYS_OR2_PRELIM 0xfc000000 /* 64 MB */ #define CONFIG_SYS_SPD_BUS_NUM 0 @@ -190,8 +177,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -258,7 +243,6 @@ "bootm ${kernel_addr_r} - ${fdt_addr};" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "" -#define CONFIG_BOOTCOMMAND "run boot_nor" /* pass open firmware flat tree */ diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h index a2fe547..768e33d 100644 --- a/include/configs/somlabs_visionsom_6ull.h +++ b/include/configs/somlabs_visionsom_6ull.h @@ -53,19 +53,6 @@ "run setrootmmc; " \ "run setloadmmc; " \ -#define CONFIG_BOOTCOMMAND \ - "run setfdtfile; " \ - "run checkbootdev; " \ - "run loadfdt;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run setbootargs; " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "fi; " \ - "fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/stemmy.h b/include/configs/stemmy.h index e5571b2..96e759d 100644 --- a/include/configs/stemmy.h +++ b/include/configs/stemmy.h @@ -14,6 +14,7 @@ * bootloader. New images are loaded at the same address for compatibility. */ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_BOOTM_LEN SZ_64M /* FIXME: This should be loaded from device tree... */ #define CONFIG_SYS_L2_PL310 diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index 0a4cd84..18a57f2 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -17,11 +17,6 @@ #define CONFIG_TIMESTAMP -#define CONFIG_BOOTCOMMAND \ - "sf probe 0:1 50000000; " \ - "sf read ${loadaddr} 0x100000 ${kern_size}; " \ - "bootm ${loadaddr}" - #define CONFIG_EXTRA_ENV_SETTINGS \ "kern_size=0x700000\0" \ "loadaddr=0x40001000\0" \ @@ -46,9 +41,6 @@ #define CONFIG_RTC_MCFRRTC #define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 -/* spi not partitions */ -#define CONFIG_JFFS2_DEV "nor0" - /* Timer */ #define CONFIG_MCFTMR diff --git a/include/configs/stout.h b/include/configs/stout.h index a1e7e86..df2d967 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -39,8 +39,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index d380884..dd94216 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -34,8 +34,6 @@ /* Misc configuration */ -#define CONFIG_BOOTCOMMAND "go 0x40040000" - /* + * QSPI support + */ diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 3d099b4..0409589 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -41,15 +41,11 @@ #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024)) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE) - #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 128 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ -/* #define CONFIG_SYS_PCI_64BIT 1 */ #define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \ "mtd nor1=u-boot.bin raw 200000 100000;" \ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h deleted file mode 100644 index a47e2c5..0000000 --- a/include/configs/tam3517-common.h +++ /dev/null @@ -1,281 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * Copyright (C) 2009 TechNexion Ltd. - */ - -#ifndef __TAM3517_H -#define __TAM3517_H - -/* - * High Level Configuration Options - */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -/* - * DDR related - */ -#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -/* - * select serial console configuration - */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 - -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access */ - /* nand at CS0 */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ - /* NAND devices */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_MAXARGS 32 /* max number of command */ - /* args */ - -/* - * AM3517 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* - * Physical Memory Map - */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -/* Redundant Environment */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* - * ethernet support, EMAC - * - */ -#define CONFIG_NET_RETRY_COUNT 10 - -/* Defines for SPL */ -#define CONFIG_SPL_CONSOLE -#define CONFIG_SPL_NAND_SOFTECC -#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */ - -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -/* FAT */ -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" - -/* RAW SD card / eMMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ - -/* NAND boot config */ -#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\ - 48, 49, 50, 51, 52, 53, 54, 55,\ - 56, 57, 58, 59, 60, 61, 62, 63} -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 - -/* Setup MTD for NAND on the SOM */ - -#define CONFIG_TAM3517_SETTINGS \ - "netdev=eth0\0" \ - "nandargs=setenv bootargs root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttyO0,${baudrate}\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "loadaddr=82000000\0" \ - "kernel_addr_r=82000000\0" \ - "hostname=" CONFIG_HOSTNAME "\0" \ - "bootfile=" CONFIG_HOSTNAME "/uImage\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "nandboot=run nandargs addip addtty addmtd addmisc;" \ - "nand read ${kernel_addr_r} kernel\0" \ - "bootm ${kernel_addr_r}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_self=if run net_self_load;then " \ - "run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ - "else echo Images not loades;fi\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.img\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "loadmlo=tftp ${loadaddr} ${mlo}\0" \ - "mlo=" CONFIG_HOSTNAME "/MLO\0" \ - "uboot_addr=0x80000\0" \ - "update=nandecc sw;nand erase ${uboot_addr} 100000;" \ - "nand write ${loadaddr} ${uboot_addr} 80000\0" \ - "updatemlo=nandecc hw;nand erase 0 20000;" \ - "nand write ${loadaddr} 0 20000\0" \ - "upd=if run load;then echo Updating u-boot;if run update;" \ - "then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - -/* - * this is common code for all TAM3517 boards. - * MAC address is stored from manufacturer in - * I2C EEPROM - */ -#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) -/* - * The I2C EEPROM on the TAM3517 contains - * mac address and production data - */ -struct tam3517_module_info { - char customer[48]; - char product[48]; - - /* - * bit 0~47 : sequence number - * bit 48~55 : week of year, from 0. - * bit 56~63 : year - */ - unsigned long long sequence_number; - - /* - * bit 0~7 : revision fixed - * bit 8~15 : revision major - * bit 16~31 : TNxxx - */ - unsigned int revision; - unsigned char eth_addr[4][8]; - unsigned char _rev[100]; -}; - -#define TAM3517_READ_EEPROM(info, ret) \ -do { \ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ - if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ - (void *)info, sizeof(*info))) \ - ret = 1; \ - else \ - ret = 0; \ -} while (0) - -#define TAM3517_READ_MAC_FROM_EEPROM(info) \ -do { \ - char buf[80], ethname[20]; \ - int i; \ - memset(buf, 0, sizeof(buf)); \ - for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) { \ - sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ - (info)->eth_addr[i][5], \ - (info)->eth_addr[i][4], \ - (info)->eth_addr[i][3], \ - (info)->eth_addr[i][2], \ - (info)->eth_addr[i][1], \ - (info)->eth_addr[i][0]); \ - \ - if (i) \ - sprintf(ethname, "eth%daddr", i); \ - else \ - strcpy(ethname, "ethaddr"); \ - printf("Setting %s from EEPROM with %s\n", ethname, buf);\ - env_set(ethname, buf); \ - } \ -} while (0) - -/* The following macros are taken from Technexion's documentation */ -#define TAM3517_sequence_number(info) \ - ((info)->sequence_number % 0x1000000000000LL) -#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100) -#define TAM3517_year(info) ((info)->sequence_number >> 56) -#define TAM3517_revision_fixed(info) ((info)->revision % 0x100) -#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100) -#define TAM3517_revision_tn(info) ((info)->revision >> 16) - -#define TAM3517_PRINT_SOM_INFO(info) \ -do { \ - printf("Vendor:%s\n", (info)->customer); \ - printf("SOM: %s\n", (info)->product); \ - printf("SeqNr: %02llu%02llu%012llu\n", \ - TAM3517_year(info), \ - TAM3517_week_of_year(info), \ - TAM3517_sequence_number(info)); \ - printf("Rev: TN%u %u.%u\n", \ - TAM3517_revision_tn(info), \ - TAM3517_revision_major(info), \ - TAM3517_revision_fixed(info)); \ -} while (0) - -#endif - -#endif /* __TAM3517_H */ diff --git a/include/configs/tec.h b/include/configs/tec.h index aa9665e..432ccbd 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 673056c..99b7bd0 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -12,7 +12,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ #include <asm/arch/tegra.h> /* get chip and board defs */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 063213c..fac8692 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -79,6 +79,4 @@ */ #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 -#define CONFIG_SYS_NAND_SELF_INIT - #endif /* _TEGRA20_COMMON_H_ */ diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h index 193c6c3..eaa19ee 100644 --- a/include/configs/theadorable-x86-common.h +++ b/include/configs/theadorable-x86-common.h @@ -22,7 +22,6 @@ /* Environment settings */ -#undef CONFIG_BOOTCOMMAND #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/thuban.h b/include/configs/thuban.h index d45ff7d..3b12007 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -50,24 +50,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_THUBAN_H */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index ee63ce3..0f786ab 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -56,22 +56,6 @@ "bootm ${loadaddr}\0" \ "fdtfile=ti814x-evm.dtb\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loaduimage; then " \ - "run mmcboot;" \ - "fi;" \ - "fi;" \ - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index fa99152..533673b 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -17,11 +17,6 @@ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc rescan;" \ - "fatload mmc 0 ${loadaddr} uImage;" \ - "bootm ${loadaddr}" \ - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -32,7 +27,6 @@ /** * Platform/Board specific defs */ -#define CONFIG_SYS_CLK_FREQ 27000000 #define CONFIG_SYS_TIMERBASE 0x4802E000 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 8b0dd49..4a329bf 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -205,24 +205,6 @@ "mtdparts=mtdparts=davinci_nand.0:" \ "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0" -#ifndef CONFIG_BOOTCOMMAND -#ifndef CONFIG_TI_SECURE_DEVICE -#define CONFIG_BOOTCOMMAND \ - "run init_${boot}; " \ - "run get_mon_${boot} run_mon; " \ - "run get_kern_${boot}; " \ - "run init_fw_rd_${boot}; " \ - "run get_fdt_${boot}; " \ - "run run_kern" -#else -#define CONFIG_BOOTCOMMAND \ - "run run_mon_hs; " \ - "run init_${boot}; " \ - "run get_fit_${boot}; " \ - "bootm ${addr_fit}#${name_fdt}" -#endif -#endif - /* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 055d108..270ef95 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -170,10 +170,6 @@ "exit; " \ "fi; " \ -#define FASTBOOT_CMD \ - "echo Booting into fastboot ...; " \ - "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " - #define DEFAULT_COMMON_BOOT_TI_ARGS \ "console=" CONSOLEDEV ",115200n8\0" \ "fdtfile=undefined\0" \ @@ -195,7 +191,7 @@ "if bcb test command = bootonce-bootloader; then " \ "echo Android: Bootloader boot...; " \ "bcb clear command; bcb store; " \ - FASTBOOT_CMD \ + "fastboot 1; " \ "exit; " \ "elif bcb test command = boot-recovery; then " \ "echo Android: Recovery boot...; " \ @@ -260,21 +256,6 @@ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" -#define CONFIG_BOOTCOMMAND \ - "if test ${dofastboot} -eq 1; then " \ - "echo Boot fastboot requested, resetting dofastboot ...;" \ - "setenv dofastboot 0; saveenv;" \ - FASTBOOT_CMD \ - "fi;" \ - "if test ${boot_fit} -eq 1; then " \ - "run update_to_fit;" \ - "fi;" \ - "run findfdt; " \ - "run finduuid; " \ - "run distro_bootcmd;" \ - "run emmc_android_boot; " \ - "" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 88bb4a8..ba6c3f0 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -94,9 +94,4 @@ EXTRA_ENV_USB \ DFU_ALT_INFO -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "if mmcinfo; then " \ - "if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; " \ - "fi; fi; run $modeboot" - #endif /* __CONFIG_TOPIC_MIAMI_H */ diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h index 933a145..c752da3 100644 --- a/include/configs/total_compute.h +++ b/include/configs/total_compute.h @@ -47,27 +47,6 @@ * without verification (for development purposes). * Else boot FIT image. */ -#define CONFIG_BOOTCOMMAND \ - "if part number mmc 0 vbmeta is_avb; then" \ - " echo MMC with vbmeta partition detected.;" \ - " echo starting Android Verified boot.;" \ - " avb init 0; " \ - " if avb verify; then " \ - " set bootargs $bootargs $avb_bootargs; " \ - " part start mmc 0 boot boot_start; " \ - " part size mmc 0 boot boot_size; " \ - " mmc read ${load_addr} ${boot_start} ${boot_size}; " \ - " bootm ${load_addr} ${load_addr} ${fdt_addr_r}; " \ - " else; " \ - " echo AVB verification failed.; " \ - " exit; " \ - " fi; " \ - "elif part number mmc 0 system is_non_avb_android; then " \ - " booti ${kernel_addr_r} ${initrd_addr_r} ${fdt_addr_r};" \ - "else;" \ - " echo Booting FIT image.;" \ - " bootm ${load_addr} ${load_addr} ${fdt_addr_r}; " \ - "fi;" /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index e6dc9f1..4d5b470 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -25,9 +25,6 @@ */ #define CONFIG_SYS_NS16550_CLK 40000000 -#define CONFIG_BOOTCOMMAND \ - "dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr" - /* * Command */ diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 233031b..633b100 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -119,9 +119,6 @@ "fi; fi; " \ "setenv filesize; setenv blkc \0" \ -#define CONFIG_BOOTCOMMAND \ - "run mmcboot; run netboot; run panicboot" - #elif defined(CONFIG_TQMA6X_SPI_BOOT) #define TQMA6_UBOOT_OFFSET 0x400 @@ -205,11 +202,7 @@ "setexpr offset ${fdt_start} * " \ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "sf read ${fdt_addr} ${offset} ${size}; " \ - "setenv size ; setenv offset\0" \ - -#define CONFIG_BOOTCOMMAND \ - "sf probe; run mmcboot; run netboot; run panicboot" \ - + "setenv size ; setenv offset\0" #else #error "need to define boot source" diff --git a/include/configs/trats.h b/include/configs/trats.h index 396e9f2..5217400 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -15,7 +15,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -26,8 +25,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_BOOTCOMMAND "run autoboot" - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 114dd8e..8d4b782 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -14,7 +14,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -25,8 +24,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_BOOTCOMMAND "run autoboot" - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index 1ce844f..bdd6b4b 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -23,7 +23,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index dbd4a00..fb7b83d 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -79,11 +79,6 @@ #endif #define CONFIG_ROOTPATH "/nfs/root/path" -#define NFSBOOTCOMMAND \ - "setenv bootargs $bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ - "run __nfsboot" #ifdef CONFIG_FIT #define CONFIG_BOOTFILE "fitImage" @@ -203,6 +198,4 @@ #define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SYS_PCI_64BIT - #endif /* __CONFIG_UNIPHIER_H__ */ diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 49895e7..ffa6900 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -63,7 +63,6 @@ #endif /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "nboot 21000000 0" #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 6f5a1c8..0faa656 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -10,8 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_FSL_CLK - #include <asm/arch/imx-regs.h> /* U-Boot environment */ @@ -36,12 +34,6 @@ /* Linux boot */ #define CONFIG_HOSTNAME "usbarmory" -#define CONFIG_BOOTCOMMAND \ - "run distro_bootcmd; " \ - "setenv bootargs console=${console} ${bootargs_default}; " \ - "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \ - "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \ - "bootz ${kernel_addr_r} - ${fdt_addr_r}" #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0) diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 7fbec27..17583c0 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -103,7 +101,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* ENET */ #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8.h index df22584..54e8cae 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8.h @@ -4,36 +4,39 @@ * configurations. */ -#ifndef __VEXPRESS_AEMV8A_H -#define __VEXPRESS_AEMV8A_H +#ifndef __VEXPRESS_AEMV8_H +#define __VEXPRESS_AEMV8_H + +#include <linux/stringify.h> #define CONFIG_REMAKE_ELF /* Link Definitions */ -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#else /* ATF loads u-boot here for BASE_FVP model */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) -#elif CONFIG_TARGET_VEXPRESS64_JUNO -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* CS register bases for the original memory map. */ -#define V2M_PA_CS0 0x00000000 -#define V2M_PA_CS1 0x14000000 -#define V2M_PA_CS2 0x18000000 -#define V2M_PA_CS3 0x1c000000 -#define V2M_PA_CS4 0x0c000000 -#define V2M_PA_CS5 0x10000000 +#define V2M_BASE 0x80000000 +#define V2M_PA_BASE 0x00000000 + +#define V2M_PA_CS0 (V2M_PA_BASE + 0x00000000) +#define V2M_PA_CS1 (V2M_PA_BASE + 0x14000000) +#define V2M_PA_CS2 (V2M_PA_BASE + 0x18000000) +#define V2M_PA_CS3 (V2M_PA_BASE + 0x1c000000) +#define V2M_PA_CS4 (V2M_PA_BASE + 0x0c000000) +#define V2M_PA_CS5 (V2M_PA_BASE + 0x10000000) #define V2M_PERIPH_OFFSET(x) (x << 16) #define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1)) #define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2)) #define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3)) -#define V2M_BASE 0x80000000 - /* Common peripherals relative to CS7. */ #define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4)) #define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5)) @@ -72,23 +75,23 @@ /* Generic Interrupt Controller Definitions */ #ifdef CONFIG_GICV3 -#define GICD_BASE (0x2f000000) -#define GICR_BASE (0x2f100000) +#define GICD_BASE (V2M_PA_BASE + 0x2f000000) +#define GICR_BASE (V2M_PA_BASE + 0x2f100000) #else -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP -#define GICD_BASE (0x2f000000) -#define GICC_BASE (0x2c000000) -#elif CONFIG_TARGET_VEXPRESS64_JUNO +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO #define GICD_BASE (0x2C010000) #define GICC_BASE (0x2C02f000) +#else +#define GICD_BASE (V2M_PA_BASE + 0x2f000000) +#define GICC_BASE (V2M_PA_BASE + 0x2c000000) #endif #endif /* !CONFIG_GICV3 */ -#ifndef CONFIG_TARGET_VEXPRESS64_JUNO -/* The Vexpress64 simulators use SMSC91C111 */ +#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && !defined(CONFIG_DM_ETH) +/* The Vexpress64 BASE_FVP simulator uses SMSC91C111 */ #define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE (0x01A000000) +#define CONFIG_SMC91111_BASE (V2M_PA_BASE + 0x01A000000) #endif /* PL011 Serial Configuration */ @@ -113,7 +116,7 @@ #ifdef CONFIG_TARGET_VEXPRESS64_JUNO #define PHYS_SDRAM_2 (0x880000000) #define PHYS_SDRAM_2_SIZE 0x180000000 -#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP && CONFIG_NR_DRAM_BANKS == 2 +#elif CONFIG_NR_DRAM_BANKS == 2 #define PHYS_SDRAM_2 (0x880000000) #define PHYS_SDRAM_2_SIZE 0x80000000 #endif @@ -171,35 +174,22 @@ BOOTENV #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP + +#define VEXPRESS_KERNEL_ADDR 0x80080000 +#define VEXPRESS_FDT_ADDR 0x8fc00000 +#define VEXPRESS_BOOT_ADDR 0x8fd00000 +#define VEXPRESS_RAMDISK_ADDR 0x8fe00000 + #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_name=Image\0" \ - "kernel_addr=0x80080000\0" \ - "initrd_name=ramdisk.img\0" \ - "initrd_addr=0x88000000\0" \ - "fdtfile=devtree.dtb\0" \ - "fdt_addr=0x83000000\0" \ - "boot_name=boot.img\0" \ - "boot_addr=0x8007f800\0" - -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "if smhload ${boot_name} ${boot_addr}; then " \ - " set bootargs; " \ - " abootimg addr ${boot_addr}; " \ - " abootimg get dtb --index=0 fdt_addr; " \ - " bootm ${boot_addr} ${boot_addr} " \ - " ${fdt_addr}; " \ - "else; " \ - " set fdt_high 0xffffffffffffffff; " \ - " set initrd_high 0xffffffffffffffff; " \ - " smhload ${kernel_name} ${kernel_addr}; " \ - " smhload ${fdtfile} ${fdt_addr}; " \ - " smhload ${initrd_name} ${initrd_addr} "\ - " initrd_end; " \ - " fdt addr ${fdt_addr}; fdt resize; " \ - " fdt chosen ${initrd_addr} ${initrd_end}; " \ - " booti $kernel_addr - $fdt_addr; " \ - "fi" -#endif + "kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \ + "ramdisk_name=ramdisk.img\0" \ + "ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \ + "fdtfile=devtree.dtb\0" \ + "fdt_addr_r=" __stringify(VEXPRESS_FDT_ADDR) "\0" \ + "boot_name=boot.img\0" \ + "boot_addr_r=" __stringify(VEXPRESS_BOOT_ADDR) "\0" + #endif /* Monitor Command Prompt */ @@ -213,7 +203,7 @@ /* Store environment at top of flash in the same location as blank.img */ /* in the Juno firmware. */ #else -#define CONFIG_SYS_FLASH_BASE 0x0C000000 +#define CONFIG_SYS_FLASH_BASE (V2M_PA_BASE + 0x0C000000) /* 256 x 256KiB sectors */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* Store environment at top of flash */ @@ -230,4 +220,4 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ #define FLASH_MAX_SECTOR_SIZE 0x00040000 -#endif /* __VEXPRESS_AEMV8A_H */ +#endif /* __VEXPRESS_AEMV8_H */ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 990f5ed..91d50bc 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -109,8 +109,6 @@ /* Board info register */ #define SYS_ID V2M_SYSREGS -#define CONFIG_SYS_L2CACHE_OFF 1 - #define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) diff --git a/include/configs/veyron.h b/include/configs/veyron.h index 2ab6d6c..ce9441d 100644 --- a/include/configs/veyron.h +++ b/include/configs/veyron.h @@ -13,6 +13,4 @@ #include <configs/rk3288_common.h> -#define CONFIG_KEYBOARD - #endif diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 6ec39a0..d90c2fa 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> #include <linux/stringify.h> -#define CONFIG_SYS_FSL_CLK - /* NAND support */ #ifdef CONFIG_CMD_NAND @@ -127,18 +125,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical memory map */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index b353c37..7bd4882 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -34,13 +34,11 @@ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI0 -#define CONFIG_SPI_FLASH_STMICRO #endif /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI #define ATMEL_BASE_MMCI 0xfc000000 #define CONFIG_SYS_MMC_CLK_OD 500000 @@ -60,11 +58,6 @@ /* Use our own mapping for the VInCo platform */ /* Update the bootcommand according to our mapping for the VInCo platform */ -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "mmc dev 0 0;" \ - "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \ - "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \ - "bootz ${loadaddr} - ${oftaddr}" #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_start=0x20000\0" \ diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index 58888d4..c60da8a 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_NS16550_CLK 40000000 #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM3 0xb0000e00 -#define CONFIG_CONS_INDEX 3 /* RAM */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index ece762e..051c18c 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -32,7 +32,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/warp.h b/include/configs/warp.h index 11a9b31..8bdda37 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -117,17 +117,4 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - #endif /* __CONFIG_H */ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 00031d8..83ee178 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -16,7 +16,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_DFU_ENV_SETTINGS \ "dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \ @@ -40,12 +39,12 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_file=imx7s-warp.dtb\0" \ - "fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \ + "fdt_addr=0x83000000\0" \ "fdtovaddr=0x83100000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "rootpart=" __stringify(CONFIG_WARP7_ROOT_PART) "\0" \ "finduuid=part uuid mmc 0:${rootpart} uuid\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -83,19 +82,6 @@ "bootz; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "run do_bootscript_hab;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index a45d3b4..a43fd81 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -55,7 +55,6 @@ */ /* driver configuration */ -#define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_MAX_NAND_CHIPS 1 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE @@ -64,8 +63,6 @@ * GPIO */ -#define CONFIG_LPC32XX_GPIO - /* * Environment */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 486b5ca..394978b 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -14,8 +14,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_PHYSMEM - #define CONFIG_SYS_BOOTM_LEN (16 << 20) /* SATA AHCI storage */ @@ -39,11 +37,6 @@ */ #define CONFIG_SYS_NS16550_PORT_MAPPED -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" -#endif - /* * Miscellaneous configurable options */ @@ -88,9 +81,14 @@ #define DISTRO_BOOTENV #endif +#ifndef SPLASH_SETTINGS +#define SPLASH_SETTINGS +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ DISTRO_BOOTENV \ CONFIG_STD_DEVICES_SETTINGS \ + SPLASH_SETTINGS \ "pciconfighost=1\0" \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ @@ -101,21 +99,4 @@ "ramdiskfile=initramfs.gz\0" -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftpboot $kernel_addr_r $bootfile;" \ - "tftpboot $ramdisk_addr_r $ramdiskfile;" \ - "zboot $kernel_addr_r 0 $ramdisk_addr_r $filesize" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftpboot $kernel_addr_r $bootfile;" \ - "zboot $kernel_addr_r" - - #endif /* __CONFIG_H */ diff --git a/include/configs/xea.h b/include/configs/xea.h index 5081cc8..aa48bb9 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -29,10 +29,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (SZ_32K / 0x200) #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (SZ_1M / 0x200) -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SPI_FLASH_MTD -#endif - /* Memory configuration */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */ @@ -42,7 +38,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTCOMMAND "run ${bootpri} ; run ${bootsec}" /* Extra Environment */ #define CONFIG_HOSTNAME "xea" diff --git a/include/configs/xenguest_arm64.h b/include/configs/xenguest_arm64.h index c5e3d16..408c7b5 100644 --- a/include/configs/xenguest_arm64.h +++ b/include/configs/xenguest_arm64.h @@ -11,17 +11,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_NR_DRAM_BANKS #undef CONFIG_SYS_SDRAM_BASE -#define CONFIG_NR_DRAM_BANKS 1 - -/* - * This can be any arbitrary address as we are using PIE, but - * please note, that CONFIG_SYS_TEXT_BASE must match the below. - */ -#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_LOAD_ADDR - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 64 @@ -29,8 +20,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_OF_SYSTEM_SETUP - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "loadimage=ext4load pvblock 0 0x90000000 /boot/Image;\0" \ diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 4348645..03539a4 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -26,8 +26,6 @@ #endif /* Serial setup */ -#define CONFIG_CPU_ARMV8 - #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index e214805..f4b7f30 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -26,8 +26,6 @@ #endif /* Serial setup */ -#define CONFIG_CPU_ARMV8 - #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } @@ -39,10 +37,6 @@ # define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif -#if defined(CONFIG_SPL_BUILD) -#define CONFIG_ZYNQMP_PSU_INIT_ENABLED -#endif - /* Miscellaneous configurable options */ #if defined(CONFIG_ZYNQMP_USB) diff --git a/include/configs/xilinx_zynqmp_mini.h b/include/configs/xilinx_zynqmp_mini.h index c106443..c3c8b4c 100644 --- a/include/configs/xilinx_zynqmp_mini.h +++ b/include/configs/xilinx_zynqmp_mini.h @@ -15,7 +15,6 @@ #include <configs/xilinx_zynqmp.h> /* Undef unneeded configs */ -#undef CONFIG_BOOTCOMMAND #undef CONFIG_EXTRA_ENV_SETTINGS #undef CONFIG_SYS_INIT_SP_ADDR diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h index 6d5b81e..3ec99e0 100644 --- a/include/configs/xilinx_zynqmp_r5.h +++ b/include/configs/xilinx_zynqmp_r5.h @@ -8,9 +8,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS -/* CPU clock */ -#define CONFIG_CPU_FREQ_HZ 500000000 - /* Serial drivers */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/xpress.h b/include/configs/xpress.h index f6645a7..6d621f2 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -48,8 +48,6 @@ #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_ETHPRIME "FEC" -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_UBOOT_SECTOR_START 0x2 #define CONFIG_UBOOT_SECTOR_COUNT 0x3fe @@ -64,7 +62,7 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index ccc90a6..c8a6e9a 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -22,9 +22,6 @@ #define CONFIG_XTFPGA -/* FPGA CPU freq after init */ -#define CONFIG_SYS_CLK_FREQ (gd->cpu_clk) - /*===================*/ /* RAM Layout */ /*===================*/ @@ -169,7 +166,7 @@ #define CONFIG_SYS_NS16550_COM1 IOADDR(0x0D050020) /* Base address */ /* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_NS16550_CLK get_board_sys_clk() /*======================*/ /* Ethernet Driver Info */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 4de2f94..88c6490 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -9,15 +9,9 @@ #ifndef __CONFIG_ZYNQ_COMMON_H #define __CONFIG_ZYNQ_COMMON_H -/* CPU clock */ -#ifndef CONFIG_CPU_FREQ_HZ -# define CONFIG_CPU_FREQ_HZ 800000000 -#endif - #define CONFIG_REMAKE_ELF /* Cache options */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF # define CONFIG_SYS_L2_PL310 # define CONFIG_SYS_PL310_BASE 0xf8f02000 diff --git a/include/dm/device.h b/include/dm/device.h index f790041..cf785f7 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -593,7 +593,7 @@ int device_get_child(const struct udevice *parent, int index, struct udevice **devp); /** - * device_get_child_count() - Get the available child count of a device + * device_get_child_count() - Get the child count of a device * * Returns the number of children to a device. * @@ -602,6 +602,15 @@ int device_get_child(const struct udevice *parent, int index, int device_get_child_count(const struct udevice *parent); /** + * device_get_decendent_count() - Get the total number of decendents of a device + * + * Returns the total number of decendents, including all children + * + * @parent: Parent device to check + */ +int device_get_decendent_count(const struct udevice *parent); + +/** * device_find_child_by_seq() - Find a child device based on a sequence * * This searches for a device with the given seq. @@ -763,6 +772,18 @@ int device_find_first_child_by_uclass(const struct udevice *parent, * * @parent: Parent device to search * @name: Name to look for + * @len: Length of the name + * @devp: Returns device found, if any + * @return 0 if found, else -ENODEV + */ +int device_find_child_by_namelen(const struct udevice *parent, const char *name, + int len, struct udevice **devp); + +/** + * device_find_child_by_name() - Find a child by device name + * + * @parent: Parent device to search + * @name: Name to look for * @devp: Returns device found, if any * @return 0 if found, else -ENODEV */ diff --git a/include/dm/of_extra.h b/include/dm/of_extra.h index f0d2054..c2498aa 100644 --- a/include/dm/of_extra.h +++ b/include/dm/of_extra.h @@ -114,4 +114,18 @@ int ofnode_decode_memory_region(ofnode config_node, const char *mem_type, */ bool ofnode_phy_is_fixed_link(ofnode eth_node, ofnode *phy_node); +/** + * ofnode_eth_uses_inband_aneg() - Detect whether MAC should use in-band autoneg + * + * This function detects whether the Ethernet controller should use IEEE 802.3 + * clause 37 in-band autonegotiation for serial protocols such as 1000base-x, + * SGMII, USXGMII, etc. The property is relevant when the Ethernet controller + * is connected to an on-board PHY or an SFP cage, and is not relevant when it + * has a fixed link (in that case, in-band autoneg should not be used). + * + * @param eth_node ofnode belonging to the Ethernet controller + * @return true if in-band autoneg should be used, false otherwise + */ +bool ofnode_eth_uses_inband_aneg(ofnode eth_node); + #endif diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h index 0f680e5..6601bd8 100644 --- a/include/dm/ofnode.h +++ b/include/dm/ofnode.h @@ -590,11 +590,11 @@ int ofnode_stringlist_search(ofnode node, const char *propname, * * @node: node to check * @propname: name of the property containing the string list - * @index: index of the string to return + * @index: index of the string to return (cannot be negative) * @lenp: return location for the string length or an error code on failure * * @return: - * length of string, if found or -ve error value if not found + * 0 if found or -ve error value if not found */ int ofnode_read_string_index(ofnode node, const char *propname, int index, const char **outp); @@ -610,6 +610,26 @@ int ofnode_read_string_index(ofnode node, const char *propname, int index, int ofnode_read_string_count(ofnode node, const char *property); /** + * ofnode_read_string_list() - read a list of strings + * + * This produces a list of string pointers with each one pointing to a string + * in the string list. If the property does not exist, it returns {NULL}. + * + * The data is allocated and the caller is reponsible for freeing the return + * value (the list of string pointers). The strings themselves may not be + * changed as they point directly into the devicetree property. + * + * @node: node to check + * @listp: returns an allocated, NULL-terminated list of strings if the return + * value is > 0, else is set to NULL + * @return number of strings in list, 0 if none, -ENOMEM if out of memory, + * -EINVAL if no such property, -EENODATA if property is empty + * @return: NULL-terminated list of strings (NULL if no property or empty) + */ +int ofnode_read_string_list(ofnode node, const char *property, + const char ***listp); + +/** * ofnode_parse_phandle_with_args() - Find a node pointed by phandle in a list * * This function is useful to parse lists of phandles and their arguments. diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h index 695e78a..8b869c4 100644 --- a/include/dm/pinctrl.h +++ b/include/dm/pinctrl.h @@ -495,7 +495,7 @@ int pinctrl_generic_set_state(struct udevice *pctldev, struct udevice *config); static inline int pinctrl_generic_set_state(struct udevice *pctldev, struct udevice *config) { - return -EINVAL; + return -ENOSYS; } #endif @@ -512,7 +512,7 @@ int pinctrl_select_state(struct udevice *dev, const char *statename); static inline int pinctrl_select_state(struct udevice *dev, const char *statename) { - return -EINVAL; + return -ENOSYS; } #endif diff --git a/include/dm/read.h b/include/dm/read.h index 890bf3d..75c6ad6 100644 --- a/include/dm/read.h +++ b/include/dm/read.h @@ -371,6 +371,27 @@ int dev_read_string_index(const struct udevice *dev, const char *propname, * number of strings in the list, or -ve error value if not found */ int dev_read_string_count(const struct udevice *dev, const char *propname); + +/** + * dev_read_string_list() - read a list of strings + * + * This produces a list of string pointers with each one pointing to a string + * in the string list. If the property does not exist, it returns {NULL}. + * + * The data is allocated and the caller is reponsible for freeing the return + * value (the list of string pointers). The strings themselves may not be + * changed as they point directly into the devicetree property. + * + * @dev: device to examine + * @propname: name of the property containing the string list + * @listp: returns an allocated, NULL-terminated list of strings if the return + * value is > 0, else is set to NULL + * @return number of strings in list, 0 if none, -ENOMEM if out of memory, + * -ENOENT if no such property + */ +int dev_read_string_list(const struct udevice *dev, const char *propname, + const char ***listp); + /** * dev_read_phandle_with_args() - Find a node pointed by phandle in a list * @@ -906,6 +927,13 @@ static inline int dev_read_string_count(const struct udevice *dev, return ofnode_read_string_count(dev_ofnode(dev), propname); } +static inline int dev_read_string_list(const struct udevice *dev, + const char *propname, + const char ***listp) +{ + return ofnode_read_string_list(dev_ofnode(dev), propname, listp); +} + static inline int dev_read_phandle_with_args(const struct udevice *dev, const char *list_name, const char *cells_name, int cell_count, int index, struct ofnode_phandle_args *out_args) diff --git a/include/dm/root.h b/include/dm/root.h index 42510b1..780f269 100644 --- a/include/dm/root.h +++ b/include/dm/root.h @@ -131,4 +131,12 @@ int dm_remove_devices_flags(uint flags); static inline int dm_remove_devices_flags(uint flags) { return 0; } #endif +/** + * dm_get_stats() - Get some stats for driver mode + * + * @device_countp: Returns total number of devices that are bound + * @uclass_countp: Returns total number of uclasses in use + */ +void dm_get_stats(int *device_countp, int *uclass_countp); + #endif diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h index 57c664c..fb0edcc 100644 --- a/include/dm/uclass-internal.h +++ b/include/dm/uclass-internal.h @@ -243,6 +243,17 @@ int uclass_find_device_by_phandle(enum uclass_id id, struct udevice *parent, */ int uclass_bind_device(struct udevice *dev); +#if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) +/** + * uclass_pre_unbind_device() - Prepare to deassociate device with a uclass + * + * Call any handled needed before uclass_unbind_device() is called + * + * @dev: Pointer to the device + * #return 0 on success, -ve on error + */ +int uclass_pre_unbind_device(struct udevice *dev); + /** * uclass_unbind_device() - Deassociate device with a uclass * @@ -251,9 +262,10 @@ int uclass_bind_device(struct udevice *dev); * @dev: Pointer to the device * #return 0 on success, -ve on error */ -#if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) int uclass_unbind_device(struct udevice *dev); + #else +static inline int uclass_pre_unbind_device(struct udevice *dev) { return 0; } static inline int uclass_unbind_device(struct udevice *dev) { return 0; } #endif @@ -295,6 +307,13 @@ static inline int uclass_pre_remove_device(struct udevice *dev) { return 0; } #endif /** + * uclass_get_count() - Get the number of uclasses + * + * Returns the number of uclasses instantiated in driver model + */ +int uclass_get_count(void); + +/** * uclass_find() - Find uclass by its id * * @id: Id to serach for diff --git a/include/dm/uclass.h b/include/dm/uclass.h index 15e5f9e..f1fd2ba 100644 --- a/include/dm/uclass.h +++ b/include/dm/uclass.h @@ -176,6 +176,15 @@ const char *uclass_get_name(enum uclass_id id); * uclass_get_by_name() - Look up a uclass by its driver name * * @name: Name to look up + * @len: Length of name + * @returns the associated uclass ID, or UCLASS_INVALID if not found + */ +enum uclass_id uclass_get_by_name_len(const char *name, int len); + +/** + * uclass_get_by_name() - Look up a uclass by its driver name + * + * @name: Name to look up * @returns the associated uclass ID, or UCLASS_INVALID if not found */ enum uclass_id uclass_get_by_name(const char *name); @@ -417,6 +426,14 @@ int uclass_first_device_drvdata(enum uclass_id id, ulong driver_data, int uclass_probe_all(enum uclass_id id); /** + * uclass_id_count() - Count the number of devices in a uclass + * + * @id: uclass ID to look up + * @return number of devices in that uclass (0 if none) + */ +int uclass_id_count(enum uclass_id id); + +/** * uclass_id_foreach_dev() - Helper function to iteration through devices * * This creates a for() loop which works through the available devices in diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h index 2cec01f..b60c034 100644 --- a/include/dt-bindings/clock/bcm2835.h +++ b/include/dt-bindings/clock/bcm2835.h @@ -58,3 +58,5 @@ #define BCM2835_CLOCK_DSI1E 48 #define BCM2835_CLOCK_DSI0P 49 #define BCM2835_CLOCK_DSI1P 50 + +#define BCM2711_CLOCK_EMMC2 51 diff --git a/include/efi.h b/include/efi.h index 1432038..877a2e5 100644 --- a/include/efi.h +++ b/include/efi.h @@ -400,15 +400,37 @@ static inline struct efi_mem_desc *efi_get_next_mem_desc( return (struct efi_mem_desc *)((ulong)desc + map->desc_size); } +/** + * struct efi_priv - Information about the environment provided by EFI + * + * @parent_image: image passed into the EFI app or stub + * @sys_table: Pointer to system table + * @boot: Pointer to boot-services table + * @run: Pointer to runtime-services table + * + * @use_pool_for_malloc: true if all allocation should go through the EFI 'pool' + * methods allocate_pool() and free_pool(); false to use 'pages' methods + * allocate_pages() and free_pages() + * @ram_base: Base address of RAM (size CONFIG_EFI_RAM_SIZE) + * @image_data_type: Type of the loaded image (e.g. EFI_LOADER_CODE) + * + * @info: Header of the info list, holding info collected by the stub and passed + * to U-Boot + * @info_size: Size of the info list @info in bytes + * @next_hdr: Pointer to where to put the next header when adding to the list + */ struct efi_priv { efi_handle_t parent_image; - struct efi_device_path *device_path; struct efi_system_table *sys_table; struct efi_boot_services *boot; struct efi_runtime_services *run; + + /* app: */ bool use_pool_for_malloc; unsigned long ram_base; unsigned int image_data_type; + + /* stub: */ struct efi_info_hdr *info; unsigned int info_size; void *next_hdr; @@ -419,10 +441,12 @@ struct efi_priv { * * @handle: handle of the controller on which this driver is installed * @blkio: block io protocol proxied by this driver + * @device_path: EFI path to the device */ struct efi_media_plat { - efi_handle_t handle; - struct efi_block_io *blkio; + efi_handle_t handle; + struct efi_block_io *blkio; + struct efi_device_path *device_path; }; /* Base address of the EFI image */ @@ -451,6 +475,27 @@ extern char _binary_u_boot_bin_start[], _binary_u_boot_bin_end[]; EFI_VARIABLE_APPEND_WRITE) /** + * efi_get_priv() - Get access to the EFI-private information + * + * This struct it used by both the stub and the app to record things about the + * EFI environment. It is not available in U-Boot proper after the stub has + * jumped there. Use efi_info_get() to obtain info in that case. + * + * Return: pointer to private info + */ +struct efi_priv *efi_get_priv(void); + +/** + * efi_set_priv() - Set up a pointer to the EFI-private information + * + * This is called in the stub and app to record the location of this + * information. + * + * @priv: New location of private data + */ +void efi_set_priv(struct efi_priv *priv); + +/** * efi_get_sys_table() - Get access to the main EFI system table * * @return pointer to EFI system table @@ -521,6 +566,10 @@ void efi_putc(struct efi_priv *priv, const char ch); /** * efi_info_get() - get an entry from an EFI table * + * This function is called from U-Boot proper to read information set up by the + * EFI stub. It can only be used when running from the EFI stub, not when U-Boot + * is running as an app. + * * @type: Entry type to search for * @datap: Returns pointer to entry data * @sizep: Returns pointer to entry size diff --git a/include/efi_api.h b/include/efi_api.h index 80109f0..ec9fa89 100644 --- a/include/efi_api.h +++ b/include/efi_api.h @@ -2035,4 +2035,19 @@ struct efi_firmware_management_protocol { const u16 *package_version_name); }; +#define EFI_DISK_IO_PROTOCOL_GUID \ + EFI_GUID(0xce345171, 0xba0b, 0x11d2, 0x8e, 0x4f, \ + 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b) + +struct efi_disk { + u64 revision; + efi_status_t (EFIAPI *read_disk)(struct efi_disk *this, u32 media_id, + u64 offset, efi_uintn_t buffer_size, + void *buffer); + + efi_status_t (EFIAPI *write_disk)(struct efi_disk *this, u32 media_id, + u64 offset, efi_uintn_t buffer_size, + void *buffer); +}; + #endif diff --git a/include/env.h b/include/env.h index ee5e30d..ff8943e 100644 --- a/include/env.h +++ b/include/env.h @@ -134,6 +134,13 @@ int env_get_f(const char *name, char *buf, unsigned int len); int env_get_yesno(const char *var); /** + * env_get_autostart() - Check if autostart is enabled + * + * @return true if the "autostart" env var exists and is set to "yes" + */ +bool env_get_autostart(void); + +/** * env_set() - set an environment variable * * This sets or deletes the value of an environment variable. For setting the diff --git a/include/env_default.h b/include/env_default.h index 23430dc..21afd7f 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -10,6 +10,10 @@ #include <env_callback.h> #include <linux/stringify.h> +#ifndef USE_HOSTCC +#include <generated/environment.h> +#endif + #ifdef DEFAULT_ENV_INSTANCE_EMBEDDED env_t embedded_environment __UBOOT_ENV_SECTION__(environment) = { ENV_CRC, /* CRC Sum */ @@ -37,12 +41,6 @@ const char default_environment[] = { #ifdef CONFIG_BOOTCOMMAND "bootcmd=" CONFIG_BOOTCOMMAND "\0" #endif -#ifdef CONFIG_RAMBOOTCOMMAND - "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" -#endif -#ifdef CONFIG_NFSBOOTCOMMAND - "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" -#endif #if defined(CONFIG_BOOTDELAY) "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" #endif @@ -110,6 +108,13 @@ const char default_environment[] = { #if defined(CONFIG_BOOTCOUNT_BOOTLIMIT) && (CONFIG_BOOTCOUNT_BOOTLIMIT > 0) "bootlimit=" __stringify(CONFIG_BOOTCOUNT_BOOTLIMIT)"\0" #endif +#ifdef CONFIG_EXTRA_ENV_TEXT +# ifdef CONFIG_EXTRA_ENV_SETTINGS +# error "Your board uses a text-file environment, so must not define CONFIG_EXTRA_ENV_SETTINGS" +# endif + /* This is created in the Makefile */ + CONFIG_EXTRA_ENV_TEXT +#endif #ifdef CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS #endif diff --git a/include/faraday/ftwdt010_wdt.h b/include/faraday/ftwdt010_wdt.h index 20bf6d3..804907d 100644 --- a/include/faraday/ftwdt010_wdt.h +++ b/include/faraday/ftwdt010_wdt.h @@ -16,6 +16,8 @@ #ifndef __FTWDT010_H #define __FTWDT010_H +#include <clock_legacy.h> + struct ftwdt010_wdt { unsigned int wdcounter; /* Counter Reg - 0x00 */ unsigned int wdload; /* Counter Auto Reload Reg - 0x04 */ @@ -82,10 +84,10 @@ struct ftwdt010_wdt { /* * Variable timeout should be set in ms. - * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms. + * (get_board_sys_clk()/1000) equals 1 ms. * WDLOAD = timeout * TIMEOUT_FACTOR. */ -#define FTWDT010_TIMEOUT_FACTOR (CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */ +#define FTWDT010_TIMEOUT_FACTOR (get_board_sys_clk() / 1000) /* 1 ms */ void ftwdt010_wdt_reset(void); void ftwdt010_wdt_disable(void); diff --git a/include/fdt_region.h b/include/fdt_region.h index ff7a1cc..d0c6876 100644 --- a/include/fdt_region.h +++ b/include/fdt_region.h @@ -77,6 +77,7 @@ struct fdt_region_state { int max_regions; /* Maximum regions to find */ int can_merge; /* 1 if we can merge with previous region */ int start; /* Start position of current region */ + bool have_node; /* True if any node is included */ struct fdt_region_ptrs ptrs; /* Pointers for what we are up to */ }; diff --git a/include/fdt_simplefb.h b/include/fdt_simplefb.h index 7cc305e..41cd740 100644 --- a/include/fdt_simplefb.h +++ b/include/fdt_simplefb.h @@ -8,6 +8,7 @@ #ifndef _FDT_SIMPLEFB_H_ #define _FDT_SIMPLEFB_H_ -int lcd_dt_simplefb_add_node(void *blob); -int lcd_dt_simplefb_enable_existing_node(void *blob); +int fdt_simplefb_add_node(void *blob); +int fdt_simplefb_enable_existing_node(void *blob); +int fdt_simplefb_enable_and_mem_rsv(void *blob); #endif diff --git a/include/fdt_support.h b/include/fdt_support.h index 88d129c..8ec461a 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -228,6 +228,8 @@ void set_working_fdt_addr(ulong addr); int fdt_shrink_to_minimum(void *blob, uint extrasize); int fdt_increase_size(void *fdt, int add_len); +int fdt_delete_disabled_nodes(void *blob); + int fdt_fixup_nor_flash_size(void *blob); struct node_info; @@ -285,9 +287,13 @@ int fdt_get_dma_range(const void *blob, int node_offset, phys_addr_t *cpu, int fdt_node_offset_by_compat_reg(void *blob, const char *compat, phys_addr_t compat_off); -int fdt_alloc_phandle(void *blob); +int fdt_node_offset_by_pathf(void *blob, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle); unsigned int fdt_create_phandle(void *fdt, int nodeoffset); +unsigned int fdt_create_phandle_by_compatible(void *fdt, const char *compat); +unsigned int fdt_create_phandle_by_pathf(void *fdt, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); int fdt_verify_alias_address(void *fdt, int anode, const char *alias, @@ -300,38 +306,61 @@ enum fdt_status { FDT_STATUS_OKAY, FDT_STATUS_DISABLED, FDT_STATUS_FAIL, - FDT_STATUS_FAIL_ERROR_CODE, }; -int fdt_set_node_status(void *fdt, int nodeoffset, - enum fdt_status status, unsigned int error_code); +int fdt_set_node_status(void *fdt, int nodeoffset, enum fdt_status status); static inline int fdt_status_okay(void *fdt, int nodeoffset) { - return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0); + return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY); } static inline int fdt_status_disabled(void *fdt, int nodeoffset) { - return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0); + return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED); } static inline int fdt_status_fail(void *fdt, int nodeoffset) { - return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0); + return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL); } int fdt_set_status_by_alias(void *fdt, const char *alias, - enum fdt_status status, unsigned int error_code); + enum fdt_status status); static inline int fdt_status_okay_by_alias(void *fdt, const char *alias) { - return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0); + return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY); } static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias) { - return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0); + return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED); } static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) { - return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); + return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL); } +int fdt_set_status_by_compatible(void *fdt, const char *compat, + enum fdt_status status); +static inline int fdt_status_okay_by_compatible(void *fdt, const char *compat) +{ + return fdt_set_status_by_compatible(fdt, compat, FDT_STATUS_OKAY); +} +static inline int fdt_status_disabled_by_compatible(void *fdt, + const char *compat) +{ + return fdt_set_status_by_compatible(fdt, compat, FDT_STATUS_DISABLED); +} +static inline int fdt_status_fail_by_compatible(void *fdt, const char *compat) +{ + return fdt_set_status_by_compatible(fdt, compat, FDT_STATUS_FAIL); +} + +int fdt_set_status_by_pathf(void *fdt, enum fdt_status status, const char *fmt, + ...) __attribute__ ((format (printf, 3, 4))); +#define fdt_status_okay_by_pathf(fdt, fmt, ...) \ + fdt_set_status_by_pathf((fdt), FDT_STATUS_OKAY, (fmt), ##__VA_ARGS__) +#define fdt_status_disabled_by_pathf(fdt, fmt, ...) \ + fdt_set_status_by_pathf((fdt), FDT_STATUS_DISABLED, (fmt), ##__VA_ARGS__) +#define fdt_status_fail_by_pathf(fdt, fmt, ...) \ + fdt_set_status_by_pathf((fdt), FDT_STATUS_FAIL, (fmt), ##__VA_ARGS__) + /* Helper to read a big number; size is in cells (not bytes) */ static inline u64 fdt_read_number(const fdt32_t *cell, int size) { diff --git a/include/fdtdec.h b/include/fdtdec.h index 6c7ab88..09525ce 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -55,6 +55,31 @@ struct bd_info; #define SPL_BUILD 0 #endif +/** + * enum fdt_source_t - indicates where the devicetree came from + * + * These are listed in approximate order of desirability after FDTSRC_NONE + * + * @FDTSRC_SEPARATE: Appended to U-Boot. This is the normal approach if U-Boot + * is the only firmware being booted + * @FDTSRC_FIT: Found in a multi-dtb FIT. This should be used when U-Boot must + * select a devicetree from many options + * @FDTSRC_BOARD: Located by custom board code. This should only be used when + * the prior stage does not support FDTSRC_PASSAGE + * @FDTSRC_EMBED: Embedded into U-Boot executable. This should onyl be used when + * U-Boot is packaged as an ELF file, e.g. for debugging purposes + * @FDTSRC_ENV: Provided by the fdtcontroladdr environment variable. This should + * be used for debugging/development only + * @FDTSRC_NONE: No devicetree at all + */ +enum fdt_source_t { + FDTSRC_SEPARATE, + FDTSRC_FIT, + FDTSRC_BOARD, + FDTSRC_EMBED, + FDTSRC_ENV, +}; + /* * Information about a resource. start is the first address of the resource * and end is the last address (inclusive). The length of the resource will @@ -111,6 +136,20 @@ struct fdt_pci_addr { extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ +/* Get a pointer to the embedded devicetree, if there is one, else NULL */ +static inline u8 *dtb_dt_embedded(void) +{ +#ifdef CONFIG_OF_EMBED +# ifdef CONFIG_SPL_BUILD + return __dtb_dt_spl_begin; +# else + return __dtb_dt_begin; +# endif +#else + return NULL; +#endif +} + /** * Compute the size of a resource. * @@ -1156,10 +1195,13 @@ int fdtdec_resetup(int *rescan); /** * Board-specific FDT initialization. Returns the address to a device tree blob. - * Called when CONFIG_OF_BOARD is defined, or if CONFIG_OF_SEPARATE is defined - * and the board implements it. + * + * Called when CONFIG_OF_BOARD is defined. + * + * The existing devicetree is available at gd->fdt_blob * * @err internal error code if we fail to setup a DTB + * @returns new devicetree blob pointer */ void *board_fdt_blob_setup(int *err); @@ -1198,4 +1240,11 @@ int fdtdec_decode_ram_size(const void *blob, const char *area, int board_id, phys_addr_t *basep, phys_size_t *sizep, struct bd_info *bd); +/** + * fdtdec_get_srcname() - Get the name of where the devicetree comes from + * + * @return source name + */ +const char *fdtdec_get_srcname(void); + #endif diff --git a/include/init.h b/include/init.h index f2cd46d..dcd682c 100644 --- a/include/init.h +++ b/include/init.h @@ -14,8 +14,11 @@ #include <linux/types.h> -/* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ -#ifdef CONFIG_EFI_STUB +/* + * In case of the EFI app the UEFI firmware provides the low-level + * initialisation. + */ +#ifdef CONFIG_EFI #define ll_boot_init() false #else #include <asm/global_data.h> diff --git a/include/linux/byteorder/swab.h b/include/linux/byteorder/swab.h index 4334fa7..5efc252 100644 --- a/include/linux/byteorder/swab.h +++ b/include/linux/byteorder/swab.h @@ -39,6 +39,10 @@ (__u64)(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \ (__u64)(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56) )) +#define ___constant_swab16(x) ___swab16(x) +#define ___constant_swab32(x) ___swab32(x) +#define ___constant_swab64(x) ___swab64(x) + /* * provide defaults when no architecture-specific optimization is detected */ diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h new file mode 100644 index 0000000..cbc82f4 --- /dev/null +++ b/include/linux/if_vlan.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * VLAN An implementation of 802.1Q VLAN tagging. + * + * Authors: Ben Greear <greearb@candelatech.com> + */ +#ifndef _LINUX_IF_VLAN_H_ +#define _LINUX_IF_VLAN_H_ + +/** + * struct vlan_ethhdr - vlan ethernet header (ethhdr + vlan_hdr) + * @h_dest: destination ethernet address + * @h_source: source ethernet address + * @h_vlan_proto: ethernet protocol + * @h_vlan_TCI: priority and VLAN ID + * @h_vlan_encapsulated_proto: packet type ID or len + */ +struct vlan_ethhdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + __be16 h_vlan_encapsulated_proto; +}; + +#endif /* !(_LINUX_IF_VLAN_H_) */ diff --git a/include/mpc85xx.h b/include/mpc85xx.h index ce6d083..2c69a60 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -60,8 +60,4 @@ CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead." #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ CONFIG_SYS_CCSRBAR_PHYS_LOW) -#ifndef CONFIG_SYS_IMMR -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR -#endif - #endif /* __MPC85xx_H__ */ diff --git a/include/nand.h b/include/nand.h index 09dbda4..70c1286 100644 --- a/include/nand.h +++ b/include/nand.h @@ -10,22 +10,6 @@ #include <config.h> -/* - * All boards using a given driver must convert to self-init - * at the same time, so do it here. When all drivers are - * converted, this will go away. - */ -#ifdef CONFIG_SPL_BUILD -#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_FSL_IFC) -#define CONFIG_SYS_NAND_SELF_INIT -#endif -#else -#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\ - || defined(CONFIG_NAND_FSL_IFC) -#define CONFIG_SYS_NAND_SELF_INIT -#endif -#endif - extern void nand_init(void); unsigned long nand_size(void); @@ -34,7 +18,7 @@ unsigned long nand_size(void); int nand_mtd_to_devnum(struct mtd_info *mtd); -#ifdef CONFIG_SYS_NAND_SELF_INIT +#if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) void board_nand_init(void); int nand_register(int devnum, struct mtd_info *mtd); #else diff --git a/include/net/dsa.h b/include/net/dsa.h index a339a49..1b1068c 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -6,6 +6,7 @@ #ifndef __DSA_H__ #define __DSA_H__ +#include <dm/ofnode.h> #include <phy.h> #include <net.h> @@ -146,6 +147,17 @@ int dsa_set_tagging(struct udevice *dev, ushort headroom, ushort tailroom); struct udevice *dsa_get_master(struct udevice *dev); /** + * dsa_port_get_ofnode() - Return a reference to the given port's OF node + * + * Can be called at driver probe time or later. + * + * @dev: DSA switch udevice pointer + * @port: Port index + * @return OF node reference if OK, NULL on error + */ +ofnode dsa_port_get_ofnode(struct udevice *dev, int port); + +/** * dsa_port_get_pdata() - Helper that returns the platdata of an active * (non-CPU) DSA port device. * diff --git a/include/os.h b/include/os.h index 770d76e..4cbcbd9 100644 --- a/include/os.h +++ b/include/os.h @@ -419,6 +419,15 @@ int os_read_file(const char *name, void **bufp, int *sizep); */ int os_map_file(const char *pathname, int os_flags, void **bufp, int *sizep); +/** + * os_unmap() - Unmap a file previously mapped + * + * @buf: Mapped address + * @size: Size in bytes + * Return: 0 if OK, -ve on error + */ +int os_unmap(void *buf, int size); + /* * os_find_text_base() - Find the text section in this running process * diff --git a/include/pci.h b/include/pci.h index 797f224..6c1094d 100644 --- a/include/pci.h +++ b/include/pci.h @@ -522,6 +522,32 @@ #include <pci_ids.h> +/* + * Enhanced Configuration Access Mechanism (ECAM) + * + * See PCI Express Base Specification, Revision 5.0, Version 1.0, + * Section 7.2.2, Table 7-1, p. 677. + */ +#define PCIE_ECAM_BUS_SHIFT 20 /* Bus number */ +#define PCIE_ECAM_DEV_SHIFT 15 /* Device number */ +#define PCIE_ECAM_FUNC_SHIFT 12 /* Function number */ + +#define PCIE_ECAM_BUS_MASK 0xff +#define PCIE_ECAM_DEV_MASK 0x1f +#define PCIE_ECAM_FUNC_MASK 0x7 +#define PCIE_ECAM_REG_MASK 0xfff /* Limit offset to a maximum of 4K */ + +#define PCIE_ECAM_BUS(x) (((x) & PCIE_ECAM_BUS_MASK) << PCIE_ECAM_BUS_SHIFT) +#define PCIE_ECAM_DEV(x) (((x) & PCIE_ECAM_DEV_MASK) << PCIE_ECAM_DEV_SHIFT) +#define PCIE_ECAM_FUNC(x) (((x) & PCIE_ECAM_FUNC_MASK) << PCIE_ECAM_FUNC_SHIFT) +#define PCIE_ECAM_REG(x) ((x) & PCIE_ECAM_REG_MASK) + +#define PCIE_ECAM_OFFSET(bus, dev, func, where) \ + (PCIE_ECAM_BUS(bus) | \ + PCIE_ECAM_DEV(dev) | \ + PCIE_ECAM_FUNC(func) | \ + PCIE_ECAM_REG(where)) + #ifndef __ASSEMBLY__ #include <dm/pci.h> diff --git a/include/pci_ids.h b/include/pci_ids.h index 7ecedc7..3c5434c 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -151,6 +151,9 @@ #define PCI_DEVICE_ID_BERKOM_A4T 0xffa4 #define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8 +#define PCI_VENDOR_ID_BROADCOM 0x14e4 +#define PCI_DEVICE_ID_NXT_57320 0x16F0 + #define PCI_VENDOR_ID_COMPAQ 0x0e11 #define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508 #define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc diff --git a/include/sandboxblockdev.h b/include/sandboxblockdev.h index 4006e94..4ca9554 100644 --- a/include/sandboxblockdev.h +++ b/include/sandboxblockdev.h @@ -6,6 +6,9 @@ #ifndef __SANDBOX_BLOCK_DEV__ #define __SANDBOX_BLOCK_DEV__ +/* Maximum number of host devices - see drivers/block/sandbox.c */ +#define SANDBOX_HOST_MAX_DEVICES 4 + struct host_block_dev { #ifndef CONFIG_BLK struct blk_desc blk_dev; diff --git a/include/scmi_agent.h b/include/scmi_agent.h index f1be9ff..ed40c73 100644 --- a/include/scmi_agent.h +++ b/include/scmi_agent.h @@ -45,9 +45,9 @@ struct scmi_msg { } /** - * scmi_send_and_process_msg() - send and process a SCMI message + * devm_scmi_process_msg() - Send and process an SCMI message * - * Send a message to a SCMI server through a target SCMI agent device. + * Send a message to an SCMI server through a target SCMI agent device. * Caller sets scmi_msg::out_msg_sz to the output message buffer size. * On return, scmi_msg::out_msg_sz stores the response payload size. * diff --git a/include/spi_flash.h b/include/spi_flash.h index 4d4ae89..4566fea 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -14,20 +14,6 @@ struct udevice; -/* by default ENV use the same parameters than SF command */ -#ifndef CONFIG_ENV_SPI_BUS -# define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#endif -#ifndef CONFIG_ENV_SPI_CS -# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#endif -#ifndef CONFIG_ENV_SPI_MAX_HZ -# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#endif -#ifndef CONFIG_ENV_SPI_MODE -# define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE -#endif - struct spi_slave; struct dm_spi_flash_ops { diff --git a/include/splash.h b/include/splash.h index 7fd2de8..33e45e6 100644 --- a/include/splash.h +++ b/include/splash.h @@ -30,6 +30,7 @@ enum splash_storage { SPLASH_STORAGE_MMC, SPLASH_STORAGE_USB, SPLASH_STORAGE_SATA, + SPLASH_STORAGE_VIRTIO, }; enum splash_flags { diff --git a/include/tee.h b/include/tee.h index 087810b..13f6096 100644 --- a/include/tee.h +++ b/include/tee.h @@ -32,6 +32,25 @@ TEE_PARAM_ATTR_META) /* + * Global Platform login identifiers for tee_open_session_arg::clnt_login + */ +#define TEE_LOGIN_PUBLIC 0x00000000 +#define TEE_LOGIN_USER 0x00000001 +#define TEE_LOGIN_GROUP 0x00000002 +#define TEE_LOGIN_APPLICATION 0x00000004 +#define TEE_LOGIN_APPLICATION_USER 0x00000005 +#define TEE_LOGIN_APPLICATION_GROUP 0x00000006 +/* + * Reserve use of GP implementation specific login method range + * (0x80000000 - 0xBFFFFFFF). This range is rather being used + * for REE kernel clients or TEE implementation. + */ +#define TEE_LOGIN_REE_KERNEL_MIN 0x80000000 +#define TEE_LOGIN_REE_KERNEL_MAX 0xBFFFFFFF +/* Private login method for REE kernel/privileged clients */ +#define TEE_LOGIN_REE_KERNEL 0x80000000 + +/* * Some Global Platform error codes which has a meaning if the * TEE_GEN_CAP_GP bit is returned by the driver in * struct tee_version_data::gen_caps @@ -46,6 +65,7 @@ #define TEE_ERROR_NOT_SUPPORTED 0xffff000a #define TEE_ERROR_COMMUNICATION 0xffff000e #define TEE_ERROR_SECURITY 0xffff000f +#define TEE_ERROR_SHORT_BUFFER 0xffff0010 #define TEE_ERROR_OUT_OF_MEMORY 0xffff000c #define TEE_ERROR_OVERFLOW 0xffff300f #define TEE_ERROR_TARGET_DEAD 0xffff3024 @@ -136,8 +156,8 @@ struct tee_param { /** * struct tee_open_session_arg - extra arguments for tee_open_session() * @uuid: [in] UUID of the Trusted Application - * @clnt_uuid: [in] Normally zeroes - * @clnt_login: [in] Normally 0 + * @clnt_uuid: [in] UUID of client, zeroes for PUBLIC/REE_KERNEL + * @clnt_login: [in] Class of client TEE_LOGIN_* * @session: [out] Session id * @ret: [out] return value * @ret_origin: [out] origin of the return value diff --git a/include/tsec.h b/include/tsec.h index c301c28..72f3485 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -122,6 +122,8 @@ #define ECNTRL_REDUCED_MII_MODE 0x00000004 #define ECNTRL_SGMII_MODE 0x00000002 +#define RCTRL_PROM 0x00000008 + #ifndef CONFIG_SYS_TBIPA_VALUE # define CONFIG_SYS_TBIPA_VALUE 0x1f #endif diff --git a/include/video.h b/include/video.h index f14fb15..1d75a90 100644 --- a/include/video.h +++ b/include/video.h @@ -30,12 +30,14 @@ struct udevice; * @base: Base address of frame buffer, 0 if not yet known * @copy_base: Base address of a hardware copy of the frame buffer. See * CONFIG_VIDEO_COPY. + * @hide_logo: Hide the logo (used for testing) */ struct video_uc_plat { uint align; uint size; ulong base; ulong copy_base; + bool hide_logo; }; enum video_polarity { @@ -93,7 +95,6 @@ enum video_format { * @colour_bg: Background colour (pixel value) * @flush_dcache: true to enable flushing of the data cache after * the LCD is updated - * @cmap: Colour map for 8-bit-per-pixel displays * @fg_col_idx: Foreground color code (bit 3 = bold, bit 0-2 = color) * @bg_col_idx: Background color code (bit 3 = bold, bit 0-2 = color) */ @@ -118,7 +119,6 @@ struct video_priv { u32 colour_fg; u32 colour_bg; bool flush_dcache; - ushort *cmap; u8 fg_col_idx; u8 bg_col_idx; }; @@ -276,6 +276,13 @@ static inline int video_sync_copy_all(struct udevice *dev) #endif +/** + * video_is_active() - Test if one video device it active + * + * @return true if at least one video device is active, else false. + */ +bool video_is_active(void); + #ifndef CONFIG_DM_VIDEO /* Video functions */ diff --git a/include/virtio.h b/include/virtio.h index a42bdad..34e2bfd 100644 --- a/include/virtio.h +++ b/include/virtio.h @@ -20,6 +20,7 @@ #ifndef __VIRTIO_H__ #define __VIRTIO_H__ +#include <virtio_types.h> #include <linux/bitops.h> #include <linux/bug.h> #define VIRTIO_ID_NET 1 /* virtio net */ diff --git a/lib/Kconfig b/lib/Kconfig index 807a4c6..1883ac7 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -15,6 +15,16 @@ config SYS_NUM_ADDR_MAP help Sets the number of entries in the virtual-physical mapping table. +config PHYSMEM + bool "Access to physical memory region (> 4G)" + help + Some basic support is provided for operations on memory not + normally accessible to 32-bit U-Boot - e.g. some architectures + support access to more than 4G of memory on 32-bit + machines using physical address extension or similar. + Enable this to access this basic support, which only supports clearing + the memory. + config BCH bool "Enable Software based BCH ECC" help @@ -42,7 +52,7 @@ config CC_OPTIMIZE_LIBS_FOR_SPEED config CHARSET bool - default y if UT_UNICODE || EFI_LOADER || UFS + default y if UT_UNICODE || EFI_LOADER || UFS || EFI_APP help Enables support for various conversions between different character sets, such as between unicode representations and diff --git a/lib/efi/efi.c b/lib/efi/efi.c index 69e52e4..cd6bf47 100644 --- a/lib/efi/efi.c +++ b/lib/efi/efi.c @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* + * Functions shared by the app and stub + * * Copyright (c) 2015 Google, Inc * * EFI information obtained here: @@ -17,6 +19,33 @@ #include <efi.h> #include <efi_api.h> +static struct efi_priv *global_priv; + +struct efi_priv *efi_get_priv(void) +{ + return global_priv; +} + +void efi_set_priv(struct efi_priv *priv) +{ + global_priv = priv; +} + +struct efi_system_table *efi_get_sys_table(void) +{ + return global_priv->sys_table; +} + +struct efi_boot_services *efi_get_boot(void) +{ + return global_priv->boot; +} + +unsigned long efi_get_ram_base(void) +{ + return global_priv->ram_base; +} + /* * Global declaration of gd. * diff --git a/lib/efi/efi_app.c b/lib/efi/efi_app.c index f616656..d60f2f6 100644 --- a/lib/efi/efi_app.c +++ b/lib/efi/efi_app.c @@ -21,29 +21,58 @@ #include <efi.h> #include <efi_api.h> #include <sysreset.h> +#include <dm/device-internal.h> +#include <dm/lists.h> +#include <dm/root.h> DECLARE_GLOBAL_DATA_PTR; -static struct efi_priv *global_priv; - -struct efi_system_table *efi_get_sys_table(void) +int efi_info_get(enum efi_entry_t type, void **datap, int *sizep) { - return global_priv->sys_table; + return -ENOSYS; } -struct efi_boot_services *efi_get_boot(void) +/** + * efi_bind_block() - bind a new block device to an EFI device + * + * Binds a new top-level EFI_MEDIA device as well as a child block device so + * that the block device can be accessed in U-Boot. + * + * The device can then be accessed using 'part list efi 0', 'fat ls efi 0:1', + * for example, just like any other interface type. + * + * @handle: handle of the controller on which this driver is installed + * @blkio: block io protocol proxied by this driver + * @device_path: EFI device path structure for this + * @len: Length of @device_path in bytes + * @devp: Returns the bound device + * @return 0 if OK, -ve on error + */ +int efi_bind_block(efi_handle_t handle, struct efi_block_io *blkio, + struct efi_device_path *device_path, int len, + struct udevice **devp) { - return global_priv->boot; -} + struct efi_media_plat plat; + struct udevice *dev; + char name[18]; + int ret; -unsigned long efi_get_ram_base(void) -{ - return global_priv->ram_base; -} + plat.handle = handle; + plat.blkio = blkio; + plat.device_path = malloc(device_path->length); + if (!plat.device_path) + return log_msg_ret("path", -ENOMEM); + memcpy(plat.device_path, device_path, device_path->length); + ret = device_bind(dm_root(), DM_DRIVER_GET(efi_media), "efi_media", + &plat, ofnode_null(), &dev); + if (ret) + return log_msg_ret("bind", ret); -int efi_info_get(enum efi_entry_t type, void **datap, int *sizep) -{ - return -ENOSYS; + snprintf(name, sizeof(name), "efi_media_%x", dev_seq(dev)); + device_set_name(dev, name); + *devp = dev; + + return 0; } static efi_status_t setup_memory(struct efi_priv *priv) @@ -77,13 +106,14 @@ static efi_status_t setup_memory(struct efi_priv *priv) ret = boot->allocate_pages(EFI_ALLOCATE_MAX_ADDRESS, priv->image_data_type, pages, &addr); if (ret) { - printf("(using pool %lx) ", ret); + log_info("(using pool %lx) ", ret); priv->ram_base = (ulong)efi_malloc(priv, CONFIG_EFI_RAM_SIZE, &ret); if (!priv->ram_base) return ret; priv->use_pool_for_malloc = true; } else { + log_info("(using allocated RAM address %lx) ", (ulong)addr); priv->ram_base = addr; } gd->ram_size = pages << 12; @@ -91,6 +121,14 @@ static efi_status_t setup_memory(struct efi_priv *priv) return 0; } +/** + * free_memory() - Free memory used by the U-Boot app + * + * This frees memory allocated in setup_memory(), in preparation for returning + * to UEFI. It also zeroes the global_data pointer. + * + * @priv: Private EFI data + */ static void free_memory(struct efi_priv *priv) { struct efi_boot_services *boot = priv->boot; @@ -106,6 +144,150 @@ static void free_memory(struct efi_priv *priv) } /** + * devpath_is_partition() - Figure out if a device path is a partition + * + * Checks if a device path refers to a partition on some media device. This + * works by checking for a valid partition number in a hard-driver media device + * as the final component of the device path. + * + * @path: device path + * Return: true if a partition, false if not + * (e.g. it might be media which contains partitions) + */ +static bool devpath_is_partition(const struct efi_device_path *path) +{ + const struct efi_device_path *p; + bool was_part; + + for (p = path; p->type != DEVICE_PATH_TYPE_END; + p = (void *)p + p->length) { + was_part = false; + if (p->type == DEVICE_PATH_TYPE_MEDIA_DEVICE && + p->sub_type == DEVICE_PATH_SUB_TYPE_HARD_DRIVE_PATH) { + struct efi_device_path_hard_drive_path *hd = + (void *)path; + + if (hd->partition_number) + was_part = true; + } + } + + return was_part; +} + +/** + * setup_block() - Find all block devices and setup EFI devices for them + * + * Partitions are ignored, since U-Boot has partition handling. Errors with + * particular devices produce a warning but execution continues to try to + * find others. + * + * Return: 0 if found, -ENOSYS if there is no boot-services table, -ENOTSUPP + * if a required protocol is not supported + */ +static int setup_block(void) +{ + efi_guid_t efi_blkio_guid = EFI_BLOCK_IO_PROTOCOL_GUID; + efi_guid_t efi_devpath_guid = EFI_DEVICE_PATH_PROTOCOL_GUID; + efi_guid_t efi_pathutil_guid = EFI_DEVICE_PATH_UTILITIES_PROTOCOL_GUID; + efi_guid_t efi_pathtext_guid = EFI_DEVICE_PATH_TO_TEXT_PROTOCOL_GUID; + struct efi_boot_services *boot = efi_get_boot(); + struct efi_device_path_utilities_protocol *util; + struct efi_device_path_to_text_protocol *text; + struct efi_device_path *path; + struct efi_block_io *blkio; + efi_uintn_t num_handles; + efi_handle_t *handle; + int ret, i; + + if (!boot) + return log_msg_ret("sys", -ENOSYS); + + /* Find all devices which support the block I/O protocol */ + ret = boot->locate_handle_buffer(BY_PROTOCOL, &efi_blkio_guid, NULL, + &num_handles, &handle); + if (ret) + return log_msg_ret("loc", -ENOTSUPP); + log_debug("Found %d handles:\n", (int)num_handles); + + /* We need to look up the path size and convert it to text */ + ret = boot->locate_protocol(&efi_pathutil_guid, NULL, (void **)&util); + if (ret) + return log_msg_ret("util", -ENOTSUPP); + ret = boot->locate_protocol(&efi_pathtext_guid, NULL, (void **)&text); + if (ret) + return log_msg_ret("text", -ENOTSUPP); + + for (i = 0; i < num_handles; i++) { + struct udevice *dev; + const u16 *name; + bool is_part; + int len; + + ret = boot->handle_protocol(handle[i], &efi_devpath_guid, + (void **)&path); + if (ret) { + log_warning("- devpath %d failed (ret=%d)\n", i, ret); + continue; + } + + ret = boot->handle_protocol(handle[i], &efi_blkio_guid, + (void **)&blkio); + if (ret) { + log_warning("- blkio %d failed (ret=%d)\n", i, ret); + continue; + } + + name = text->convert_device_path_to_text(path, true, false); + is_part = devpath_is_partition(path); + + if (!is_part) { + len = util->get_device_path_size(path); + ret = efi_bind_block(handle[i], blkio, path, len, &dev); + if (ret) { + log_warning("- blkio bind %d failed (ret=%d)\n", + i, ret); + continue; + } + } else { + dev = NULL; + } + + /* + * Show the device name if we created one. Otherwise indicate + * that it is a partition. + */ + printf("%2d: %-12s %ls\n", i, dev ? dev->name : "<partition>", + name); + } + boot->free_pool(handle); + + return 0; +} + +/** + * dm_scan_other() - Scan for UEFI devices that should be available to U-Boot + * + * This sets up block devices within U-Boot for those found in UEFI. With this, + * U-Boot can access those devices + * + * @pre_reloc_only: true to only bind pre-relocation devices (ignored) + * Returns: 0 on success, -ve on error + */ +int dm_scan_other(bool pre_reloc_only) +{ + if (gd->flags & GD_FLG_RELOC) { + int ret; + + ret = setup_block(); + if (ret) + return ret; + } + + return 0; +} + +/** * efi_main() - Start an EFI image * * This function is called by our EFI start-up code. It handles running @@ -119,9 +301,12 @@ efi_status_t EFIAPI efi_main(efi_handle_t image, efi_status_t ret; /* Set up access to EFI data structures */ - efi_init(priv, "App", image, sys_table); - - global_priv = priv; + ret = efi_init(priv, "App", image, sys_table); + if (ret) { + printf("Failed to set up U-Boot: err=%lx\n", ret); + return ret; + } + efi_set_priv(priv); /* * Set up the EFI debug UART so that printf() works. This is @@ -147,7 +332,7 @@ efi_status_t EFIAPI efi_main(efi_handle_t image, static void efi_exit(void) { - struct efi_priv *priv = global_priv; + struct efi_priv *priv = efi_get_priv(); free_memory(priv); printf("U-Boot EFI exiting\n"); diff --git a/lib/efi/efi_stub.c b/lib/efi/efi_stub.c index b3393e4..c89ae7c 100644 --- a/lib/efi/efi_stub.c +++ b/lib/efi/efi_stub.c @@ -31,7 +31,6 @@ #error "This file needs to be ported for use on architectures" #endif -static struct efi_priv *global_priv; static bool use_uart; struct __packed desctab_info { @@ -63,6 +62,8 @@ void _debug_uart_init(void) void putc(const char ch) { + struct efi_priv *priv = efi_get_priv(); + if (ch == '\n') putc('\r'); @@ -73,7 +74,7 @@ void putc(const char ch) ; outb(ch, (ulong)&com_port->thr); } else { - efi_putc(global_priv, ch); + efi_putc(priv, ch); } } @@ -225,6 +226,22 @@ static int get_codeseg32(void) return cs32; } +/** + * setup_info_table() - sets up a table containing information from EFI + * + * We must call exit_boot_services() before jumping out of the stub into U-Boot + * proper, so that U-Boot has full control of peripherals, memory, etc. + * + * Once we do this, we cannot call any boot-services functions so we must find + * out everything we need to before doing that. + * + * Set up a struct efi_info_hdr table which can hold various records (e.g. + * struct efi_entry_memmap) with information obtained from EFI. + * + * @priv: Pointer to our private information which contains the list + * @size: Size of the table to allocate + * Return: 0 if OK, non-zero on error + */ static int setup_info_table(struct efi_priv *priv, int size) { struct efi_info_hdr *info; @@ -248,6 +265,19 @@ static int setup_info_table(struct efi_priv *priv, int size) return 0; } +/** + * add_entry_addr() - Add a new entry to the efi_info list + * + * This adds an entry, consisting of a tag and two lots of data. This avoids the + * caller having to coalesce the data first + * + * @priv: Pointer to our private information which contains the list + * @type: Type of the entry to add + * @ptr1: Pointer to first data block to add + * @size1: Size of first data block in bytes (can be 0) + * @ptr2: Pointer to second data block to add + * @size2: Size of second data block in bytes (can be 0) + */ static void add_entry_addr(struct efi_priv *priv, enum efi_entry_t type, void *ptr1, int size1, void *ptr2, int size2) { @@ -291,7 +321,7 @@ efi_status_t EFIAPI efi_main(efi_handle_t image, puts(" efi_init() failed\n"); return ret; } - global_priv = priv; + efi_set_priv(priv); cs32 = get_codeseg32(); if (cs32 < 0) diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 7681f27..280cda6 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -76,6 +76,19 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(ALTERA_SOCFPGA_CLK_INIT, "altr,socfpga-a10-clk-init") }; +static const char *const fdt_src_name[] = { + [FDTSRC_SEPARATE] = "separate", + [FDTSRC_FIT] = "fit", + [FDTSRC_BOARD] = "board", + [FDTSRC_EMBED] = "embed", + [FDTSRC_ENV] = "env", +}; + +const char *fdtdec_get_srcname(void) +{ + return fdt_src_name[gd->fdt_src]; +} + const char *fdtdec_get_compatible(enum fdt_compat_id id) { /* We allow reading of the 'unknown' ID for testing purposes */ @@ -1146,11 +1159,10 @@ int fdtdec_setup_mem_size_base_lowest(void) return 0; } -#if CONFIG_IS_ENABLED(MULTI_DTB_FIT) -# if CONFIG_IS_ENABLED(MULTI_DTB_FIT_GZIP) ||\ - CONFIG_IS_ENABLED(MULTI_DTB_FIT_LZO) static int uncompress_blob(const void *src, ulong sz_src, void **dstp) { +#if CONFIG_IS_ENABLED(MULTI_DTB_FIT_GZIP) ||\ + CONFIG_IS_ENABLED(MULTI_DTB_FIT_LZO) size_t sz_out = CONFIG_VAL(MULTI_DTB_FIT_UNCOMPRESS_SZ); bool gzip = 0, lzo = 0; ulong sz_in = sz_src; @@ -1175,11 +1187,11 @@ static int uncompress_blob(const void *src, ulong sz_src, void **dstp) return -ENOMEM; } } else { -# if CONFIG_IS_ENABLED(MULTI_DTB_FIT_USER_DEFINED_AREA) +# if CONFIG_IS_ENABLED(MULTI_DTB_FIT_USER_DEFINED_AREA) dst = (void *)CONFIG_VAL(MULTI_DTB_FIT_USER_DEF_ADDR); -# else +# else return -ENOTSUPP; -# endif +# endif } if (CONFIG_IS_ENABLED(GZIP) && gzip) @@ -1197,27 +1209,22 @@ static int uncompress_blob(const void *src, ulong sz_src, void **dstp) return -EBADMSG; } *dstp = dst; - return 0; -} -# else -static int uncompress_blob(const void *src, ulong sz_src, void **dstp) -{ +#else + *dstp = (void *)src; *dstp = (void *)src; +#endif return 0; } -# endif -#endif -#if defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE) -/* - * For CONFIG_OF_SEPARATE, the board may optionally implement this to - * provide and/or fixup the fdt. +/** + * fdt_find_separate() - Find a devicetree at the end of the image + * + * @return pointer to FDT blob */ -__weak void *board_fdt_blob_setup(int *err) +static void *fdt_find_separate(void) { void *fdt_blob = NULL; - *err = 0; #ifdef CONFIG_SPL_BUILD /* FDT is at end of BSS unless it is in a different memory region */ if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS)) @@ -1231,7 +1238,6 @@ __weak void *board_fdt_blob_setup(int *err) return fdt_blob; } -#endif int fdtdec_set_ethernet_mac_address(void *fdt, const u8 *mac, size_t size) { @@ -1589,60 +1595,81 @@ int fdtdec_set_carveout(void *blob, const char *node, const char *prop_name, return 0; } +/* TODO(sjg@chromium.org): This function should not be weak */ __weak int fdtdec_board_setup(const void *fdt_blob) { return 0; } -int fdtdec_setup(void) +/** + * setup_multi_dtb_fit() - locate the correct dtb from a FIT + * + * This supports the CONFIG_MULTI_DTB_FIT feature, looking for the dtb in a + * supplied FIT + * + * It accepts the current value of gd->fdt_blob, which points to the FIT, then + * updates that gd->fdt_blob, to point to the chosen dtb so that U-Boot uses the + * correct one + */ +static void setup_multi_dtb_fit(void) { - int ret; -#if CONFIG_IS_ENABLED(OF_CONTROL) -# if CONFIG_IS_ENABLED(MULTI_DTB_FIT) - void *fdt_blob; -# endif -# ifdef CONFIG_OF_EMBED - /* Get a pointer to the FDT */ -# ifdef CONFIG_SPL_BUILD - gd->fdt_blob = __dtb_dt_spl_begin; -# else - gd->fdt_blob = __dtb_dt_begin; -# endif -# elif defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE) - /* Allow the board to override the fdt address. */ - gd->fdt_blob = board_fdt_blob_setup(&ret); - if (ret) - return ret; -# endif -# ifndef CONFIG_SPL_BUILD - /* Allow the early environment to override the fdt address */ - gd->fdt_blob = map_sysmem - (env_get_ulong("fdtcontroladdr", 16, - (unsigned long)map_to_sysmem(gd->fdt_blob)), 0); -# endif + void *blob; -# if CONFIG_IS_ENABLED(MULTI_DTB_FIT) /* * Try and uncompress the blob. * Unfortunately there is no way to know how big the input blob really * is. So let us set the maximum input size arbitrarily high. 16MB * ought to be more than enough for packed DTBs. */ - if (uncompress_blob(gd->fdt_blob, 0x1000000, &fdt_blob) == 0) - gd->fdt_blob = fdt_blob; + if (uncompress_blob(gd->fdt_blob, 0x1000000, &blob) == 0) + gd->fdt_blob = blob; /* * Check if blob is a FIT images containings DTBs. * If so, pick the most relevant */ - fdt_blob = locate_dtb_in_fit(gd->fdt_blob); - if (fdt_blob) { - gd->multi_dtb_fit = gd->fdt_blob; - gd->fdt_blob = fdt_blob; + blob = locate_dtb_in_fit(gd->fdt_blob); + if (blob) { + gd_set_multi_dtb_fit(gd->fdt_blob); + gd->fdt_blob = blob; + gd->fdt_src = FDTSRC_FIT; } +} -# endif -#endif +int fdtdec_setup(void) +{ + int ret; + + /* The devicetree is typically appended to U-Boot */ + if (IS_ENABLED(CONFIG_OF_SEPARATE)) { + gd->fdt_blob = fdt_find_separate(); + gd->fdt_src = FDTSRC_SEPARATE; + } else { /* embed dtb in ELF file for testing / development */ + gd->fdt_blob = dtb_dt_embedded(); + gd->fdt_src = FDTSRC_EMBED; + } + + /* Allow the board to override the fdt address. */ + if (IS_ENABLED(CONFIG_OF_BOARD)) { + gd->fdt_blob = board_fdt_blob_setup(&ret); + if (ret) + return ret; + gd->fdt_src = FDTSRC_BOARD; + } + + /* Allow the early environment to override the fdt address */ + if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + ulong addr; + + addr = env_get_hex("fdtcontroladdr", 0); + if (addr) { + gd->fdt_blob = map_sysmem(addr, 0); + gd->fdt_src = FDTSRC_ENV; + } + } + + if (CONFIG_IS_ENABLED(MULTI_DTB_FIT)) + setup_multi_dtb_fit(); ret = fdtdec_prepare_fdt(); if (!ret) @@ -1650,7 +1677,6 @@ int fdtdec_setup(void) return ret; } -#if CONFIG_IS_ENABLED(MULTI_DTB_FIT) int fdtdec_resetup(int *rescan) { void *fdt_blob; @@ -1661,8 +1687,8 @@ int fdtdec_resetup(int *rescan) * FIT image stillpresent there. Save the time and space * required to uncompress it again. */ - if (gd->multi_dtb_fit) { - fdt_blob = locate_dtb_in_fit(gd->multi_dtb_fit); + if (gd_multi_dtb_fit()) { + fdt_blob = locate_dtb_in_fit(gd_multi_dtb_fit()); if (fdt_blob == gd->fdt_blob) { /* @@ -1686,7 +1712,6 @@ int fdtdec_resetup(int *rescan) *rescan = 0; return 0; } -#endif int fdtdec_decode_ram_size(const void *blob, const char *area, int board_id, phys_addr_t *basep, phys_size_t *sizep, diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig index 469596a..be9775b 100644 --- a/lib/rsa/Kconfig +++ b/lib/rsa/Kconfig @@ -1,7 +1,8 @@ config RSA bool "Use RSA Library" select RSA_FREESCALE_EXP if FSL_CAAM && !ARCH_MX7 && !ARCH_MX7ULP && !ARCH_MX6 && !ARCH_MX5 - select RSA_SOFTWARE_EXP if !RSA_FREESCALE_EXP + select RSA_ASPEED_EXP if ASPEED_ACRY + select RSA_SOFTWARE_EXP if !RSA_FREESCALE_EXP && !RSA_ASPEED_EXP help RSA support. This enables the RSA algorithm used for FIT image verification in U-Boot. @@ -62,4 +63,11 @@ config RSA_FREESCALE_EXP Enables driver for RSA modular exponentiation using Freescale cryptographic accelerator - CAAM. +config RSA_ASPEED_EXP + bool "Enable RSA Modular Exponentiation with ASPEED crypto accelerator" + depends on DM && ASPEED_ACRY + help + Enables driver for RSA modular exponentiation using ASPEED cryptographic + accelerator - ACRY + endif @@ -5,6 +5,7 @@ */ #include <common.h> +#include <clock_legacy.h> #include <bootstage.h> #include <dm.h> #include <errno.h> diff --git a/lib/vsprintf.c b/lib/vsprintf.c index e634bd7..de9f236 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -276,9 +276,8 @@ static char *string(char *buf, char *end, char *s, int field_width, } /* U-Boot uses UTF-16 strings in the EFI context only. */ -#if CONFIG_IS_ENABLED(EFI_LOADER) && !defined(API_BUILD) -static char *string16(char *buf, char *end, u16 *s, int field_width, - int precision, int flags) +static __maybe_unused char *string16(char *buf, char *end, u16 *s, + int field_width, int precision, int flags) { const u16 *str = s ? s : L"<NULL>"; ssize_t i, len = utf16_strnlen(str, precision); @@ -317,7 +316,6 @@ static char *device_path_string(char *buf, char *end, void *dp, int field_width, return buf; } #endif -#endif static char *mac_address_string(char *buf, char *end, u8 *addr, int field_width, int precision, int flags) @@ -616,7 +614,8 @@ repeat: case 's': /* U-Boot uses UTF-16 strings in the EFI context only. */ -#if CONFIG_IS_ENABLED(EFI_LOADER) && !defined(API_BUILD) +#if (CONFIG_IS_ENABLED(EFI_LOADER) || CONFIG_IS_ENABLED(EFI_APP)) && \ + !defined(API_BUILD) if (qualifier == 'l') { str = string16(str, end, va_arg(args, u16 *), field_width, precision, flags); diff --git a/net/bootp.c b/net/bootp.c index 655b9cc..58e30cd 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -647,7 +647,7 @@ static int bootp_extended(u8 *e) *e++ = (576 - 312 + OPT_FIELD_SIZE) & 0xff; #endif - add_vci(e); + e = add_vci(e); #if defined(CONFIG_BOOTP_SUBNETMASK) *e++ = 1; /* Subnet mask request */ diff --git a/net/dsa-uclass.c b/net/dsa-uclass.c index bf762cd..606b153 100644 --- a/net/dsa-uclass.c +++ b/net/dsa-uclass.c @@ -44,6 +44,26 @@ int dsa_set_tagging(struct udevice *dev, ushort headroom, ushort tailroom) return 0; } +ofnode dsa_port_get_ofnode(struct udevice *dev, int port) +{ + struct dsa_pdata *pdata = dev_get_uclass_plat(dev); + struct dsa_port_pdata *port_pdata; + struct udevice *pdev; + + if (port == pdata->cpu_port) + return pdata->cpu_port_node; + + for (device_find_first_child(dev, &pdev); + pdev; + device_find_next_child(&pdev)) { + port_pdata = dev_get_parent_plat(pdev); + if (port_pdata->index == port) + return dev_ofnode(pdev); + } + + return ofnode_null(); +} + /* returns the DSA master Ethernet device */ struct udevice *dsa_get_master(struct udevice *dev) { @@ -250,7 +270,7 @@ static void dsa_port_set_hwaddr(struct udevice *pdev, struct udevice *master) struct eth_ops *eth_ops = eth_get_ops(master); if (eth_ops->set_promisc) - eth_ops->set_promisc(master, 1); + eth_ops->set_promisc(master, true); return; } diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf index 8a3efdb..5ed9abc 100644 --- a/scripts/Makefile.autoconf +++ b/scripts/Makefile.autoconf @@ -67,7 +67,8 @@ quiet_cmd_autoconf = GEN $@ quiet_cmd_u_boot_cfg = CFG $@ cmd_u_boot_cfg = \ $(CPP) $(c_flags) $2 -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && { \ - grep 'define CONFIG_' $@.tmp > $@; \ + grep 'define CONFIG_' $@.tmp | \ + sed '/define CONFIG_IS_ENABLED(/d;/define CONFIG_VAL(/d;' > $@; \ rm $@.tmp; \ } || { \ rm $@.tmp; false; \ diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 39f0339..77ad282 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -175,7 +175,9 @@ u_boot_dtsi_options_raw = $(warning Automatic .dtsi inclusion: options: \ # Uncomment for debugging # This shows all the files that were considered and the one that we chose. -# u_boot_dtsi_options_debug = $(u_boot_dtsi_options_raw) +ifdef DEVICE_TREE_DEBUG +u_boot_dtsi_options_debug = $(warning $(u_boot_dtsi_options_raw)) +endif # We use the first match u_boot_dtsi = $(strip $(u_boot_dtsi_options_debug) \ @@ -372,6 +374,27 @@ cmd_S_ttf= \ $(obj)/%.S: $(src)/%.ttf $(call cmd,S_ttf) +# Splash logos +# --------------------------------------------------------------------------- + +# Generate an assembly file to wrap the splash data +quiet_cmd_S_splash= TTF $@ +# Modified for U-Boot +cmd_S_splash= \ +( \ + echo '.section .rodata.splash.init,"a"'; \ + echo '.balign 16'; \ + echo '.global __splash_$(*F)_begin'; \ + echo '__splash_$(*F)_begin:'; \ + echo '.incbin "$<" '; \ + echo '__splash_$(*F)_end:'; \ + echo '.global __splash_$(*F)_end'; \ + echo '.balign 16'; \ +) > $@ + +$(obj)/%.S: $(src)/%.bmp + $(call cmd,S_splash) + # EFI applications # A Makefile target *.efi is built as EFI application. # A Makefile target *_efi.S wraps *.efi as built-in EFI application. diff --git a/scripts/build-cb.sh b/scripts/build-cb.sh new file mode 100755 index 0000000..1da708f --- /dev/null +++ b/scripts/build-cb.sh @@ -0,0 +1,19 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ +# +# Sample script to build a disk image suitable for use with coreboot. The image +# includes a kernel and initrd. +# +# YOU WILL NEED to modify this for your needs, e.g. select a kernel. +# +# Run this with: +# qemu-system-i386 -bios coreboot.rom -drive file=disk.img,if=virtio + +qemu-img create -f raw disk.img 120M +mkfs.ext2 -F disk.img +sudo mkdir -p /mnt/rootfs +sudo mount -o loop disk.img /mnt/rootfs +sudo mkdir -p /mnt/rootfs/boot +sudo cp /boot/vmlinuz /mnt/rootfs/boot/. +sudo cp /boot/initrd.img /mnt/rootfs/boot/. +sudo umount /mnt/rootfs diff --git a/scripts/check-of.sh b/scripts/check-of.sh new file mode 100755 index 0000000..0f0bf51 --- /dev/null +++ b/scripts/check-of.sh @@ -0,0 +1,42 @@ +#!/bin/sh +# Copyright 2021 Google LLC +# Written by Simon Glass <sjg@chromium.org> +# +# Check that the .config file provided does not try to disable OF_BOARD for +# boards that use CONFIG_OF_HAS_PRIOR_STAGE +# +# Usage +# check-of.sh <path to .config> <path to allowlist file> +# +# For example: +# scripts/check-of.sh b/chromebook_link/u-boot.cfg kconfig_allowlist.txt +# +# Exit code is 0 if OK, 3 if the .config is wrong, as above + +set -e +set -u + +PROG_NAME="${0##*/}" + +usage() { + echo "$PROG_NAME <path to .config> <path to allowlist file>" + exit 1 +} + +[ $# -ge 2 ] || usage + +path="$1" +allowlist="$2" + +sys_config="$(sed -n 's/CONFIG_SYS_CONFIG_NAME="\(.*\)"$/\1/p' "${path}")" + +if grep -q OF_HAS_PRIOR_STAGE=y "${path}"; then + if ! grep -lq CONFIG_OF_BOARD=y "${path}"; then + echo >&2 "This board uses a prior stage to provide the device tree." + echo >&2 "Please enable CONFIG_OF_BOARD to ensure that it works correctly." + if grep -q "${sys_config}" "${allowlist}"; then + exit 0 + fi + exit 3 + fi +fi diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index b9c1c61..79f03d1 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1,42 +1,23 @@ -CONFIG_64BIT_PHYS_ADDR -CONFIG_83XX -CONFIG_83XX_PCICLK -CONFIG_88F5182 CONFIG_A003399_NOR_WORKAROUND CONFIG_A008044_WORKAROUND -CONFIG_AEABI CONFIG_AM335X_USB0 CONFIG_AM335X_USB0_MODE CONFIG_AM335X_USB1 CONFIG_AM335X_USB1_MODE -CONFIG_ANDES_PCU -CONFIG_ANDES_PCU_BASE -CONFIG_ARCH_ADPAG101P -CONFIG_ARCH_HAS_ILOG2_U32 -CONFIG_ARCH_HAS_ILOG2_U64 -CONFIG_ARCH_OMAP4 -CONFIG_ARCH_RMOBILE_EXTRAM_BOOT -CONFIG_ARCH_USE_BUILTIN_BSWAP -CONFIG_ARC_MMU_VER CONFIG_ARMV7_SECURE_BASE CONFIG_ARMV7_SECURE_MAX_SIZE CONFIG_ARMV7_SECURE_RESERVE_SIZE CONFIG_ARMV8_SWITCH_TO_EL1 CONFIG_ARM_GIC_BASE_ADDRESS CONFIG_ARP_TIMEOUT -CONFIG_AT91C_PQFP_UHPBUG -CONFIG_AT91RESET_EXTRST -CONFIG_AT91RM9200 CONFIG_AT91SAM9260EK CONFIG_AT91SAM9261EK CONFIG_AT91SAM9G10 CONFIG_AT91SAM9G10EK CONFIG_AT91SAM9G20EK CONFIG_AT91SAM9G20EK_2MMC -CONFIG_AT91SAM9G45EKES CONFIG_AT91SAM9G45_LCD_BASE CONFIG_AT91SAM9M10G45EK -CONFIG_AT91_CAN CONFIG_AT91_EFLASH CONFIG_AT91_GPIO_PULLUP CONFIG_AT91_LED @@ -46,13 +27,9 @@ CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 CONFIG_ATMEL_LEGACY -CONFIG_ATMEL_MCI_8BIT CONFIG_ATMEL_SPI0 CONFIG_AUTO_ZRELADDR CONFIG_BACKSIDE_L2_CACHE -CONFIG_BCH_CONST_M -CONFIG_BCH_CONST_PARAMS -CONFIG_BCH_CONST_T CONFIG_BCM2835_GPIO CONFIG_BIOSEMU CONFIG_BITBANGMII_MULTI @@ -64,20 +41,14 @@ CONFIG_BOARDDIR CONFIG_BOARDNAME CONFIG_BOARD_COMMON CONFIG_BOARD_ECC_SUPPORT -CONFIG_BOARD_IS_OPENRD_BASE -CONFIG_BOARD_IS_OPENRD_CLIENT -CONFIG_BOARD_IS_OPENRD_ULTIMATE CONFIG_BOARD_NAME CONFIG_BOARD_POSTCLK_INIT CONFIG_BOARD_SIZE_LIMIT CONFIG_BOOTFILE CONFIG_BOOTMODE CONFIG_BOOTP_BOOTFILESIZE -CONFIG_BOOTP_DHCP_REQUEST_DELAY -CONFIG_BOOTP_ID_CACHE_SIZE CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_NISDOMAIN -CONFIG_BOOTP_RANDOM_DELAY CONFIG_BOOTP_SERVERIP CONFIG_BOOTP_TIMEOFFSET CONFIG_BOOTP_VENDOREX @@ -85,7 +56,6 @@ CONFIG_BOOTROM_ERR_REG CONFIG_BOOTSCRIPT_ADDR CONFIG_BOOTSCRIPT_COPY_RAM CONFIG_BOOTSCRIPT_HDR_ADDR -CONFIG_BOOTSCRIPT_KEY_HASH CONFIG_BOOT_RETRY_MIN CONFIG_BOOT_RETRY_TIME CONFIG_BPTR_VIRT_ADDR @@ -98,35 +68,14 @@ CONFIG_BS_HDR_ADDR_RAM CONFIG_BS_HDR_SIZE CONFIG_BS_SIZE CONFIG_BTB -CONFIG_BUILD_ENVCRC -CONFIG_BUS_WIDTH -CONFIG_CDP_APPLIANCE_VLAN_TYPE -CONFIG_CDP_CAPABILITIES -CONFIG_CDP_DEVICE_ID -CONFIG_CDP_DEVICE_ID_PREFIX -CONFIG_CDP_PLATFORM -CONFIG_CDP_PORT_ID -CONFIG_CDP_POWER_CONSUMPTION -CONFIG_CDP_TRIGGER -CONFIG_CDP_VERSION -CONFIG_CFG_DATA_SECTOR CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS CONFIG_CF_DSPI CONFIG_CF_SBF -CONFIG_CF_V2 -CONFIG_CF_V3 -CONFIG_CF_V4 -CONFIG_CF_V4E CONFIG_CHAIN_BOOT_CMD CONFIG_CHIP_SELECTS_PER_CTRL -CONFIG_CHIP_SELECT_QUAD_CAPABLE CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS CONFIG_CI_UDC_HAS_HOSTPC -CONFIG_CLK_1000_200_200 -CONFIG_CLK_1000_330_165 CONFIG_CLK_1000_400_200 -CONFIG_CLK_800_330_165 -CONFIG_CLK_DEBUG CONFIG_CLOCKS CONFIG_CLOCK_SYNTHESIZER CONFIG_CM922T_XA10 @@ -136,11 +85,7 @@ CONFIG_CM_MULTIPLE_SSRAM CONFIG_CM_REMAP CONFIG_CM_SPD_DETECT CONFIG_CM_TCRAM -CONFIG_COLDFIRE CONFIG_COMMON_BOOT -CONFIG_COMPAT -CONFIG_CONS_EXTC_PINSEL -CONFIG_CONS_EXTC_RATE CONFIG_CONS_ON_SCC CONFIG_CONS_SCIF0 CONFIG_CONS_SCIF1 @@ -150,43 +95,12 @@ CONFIG_CON_ROT CONFIG_CPLD_BR_PRELIM CONFIG_CPLD_OR_PRELIM CONFIG_CPM2 -CONFIG_CPU_ARMV8 -CONFIG_CPU_FREQ_HZ -CONFIG_CPU_HAS_LLSC -CONFIG_CPU_HAS_PREFETCH -CONFIG_CPU_HAS_SMARTMIPS -CONFIG_CPU_HAS_SR_RB -CONFIG_CPU_HAS_WB -CONFIG_CPU_LITTLE_ENDIAN -CONFIG_CPU_MICROMIPS -CONFIG_CPU_MIPSR2 -CONFIG_CPU_MONAHANS -CONFIG_CPU_PXA25X -CONFIG_CPU_PXA26X -CONFIG_CPU_PXA27X -CONFIG_CPU_PXA300 -CONFIG_CPU_SH7751 -CONFIG_CPU_TYPE_R -CONFIG_CPU_VR41XX CONFIG_CQSPI_REF_CLK -CONFIG_CS8900_BUS16 -CONFIG_CS8900_BUS32 -CONFIG_CTL_JTAG -CONFIG_CTL_TBE CONFIG_CUSTOMER_BOARD_SUPPORT -CONFIG_D2NET_V2 -CONFIG_DA850_EVM_MAX_CPU_CLK CONFIG_DB_784MP_GP CONFIG_DCACHE -CONFIG_DCACHE_OFF -CONFIG_DCFG_ADDR CONFIG_DEBUG -CONFIG_DEBUG_FS CONFIG_DEBUG_LED -CONFIG_DEBUG_LOCK_ALLOC -CONFIG_DEBUG_SEMIHOSTING -CONFIG_DEBUG_UART_LINFLEXUART -CONFIG_DEBUG_WRITECOUNT CONFIG_DEEP_SLEEP CONFIG_DEFAULT CONFIG_DEFAULT_IMMR @@ -197,12 +111,9 @@ CONFIG_DFU_ALT_BOOT_EMMC CONFIG_DFU_ALT_BOOT_SD CONFIG_DFU_ALT_SYSTEM CONFIG_DFU_ENV_SETTINGS -CONFIG_DHCP_MIN_EXT_LEN CONFIG_DIALOG_POWER CONFIG_DIMM_SLOTS_PER_CTLR -CONFIG_DISCONTIGMEM CONFIG_DISCOVER_PHY -CONFIG_DISPLAY_AER_xxxx CONFIG_DM9000_BASE CONFIG_DM9000_BYTE_SWAPPED CONFIG_DM9000_DEBUG @@ -210,33 +121,20 @@ CONFIG_DM9000_NO_SROM CONFIG_DM9000_USE_16BIT CONFIG_DMA_COHERENT CONFIG_DMA_COHERENT_SIZE -CONFIG_DMA_NONCOHERENT -CONFIG_DNET_AUTONEG_TIMEOUT CONFIG_DP_DDR_CTRL CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR CONFIG_DP_DDR_NUM_CTRLS CONFIG_DRIVER_DM9000 CONFIG_DSP_CLUSTER_START -CONFIG_DWCDDR21MCTL -CONFIG_DWCDDR21MCTL_BASE CONFIG_DWC_AHSATA_BASE_ADDR CONFIG_DWC_AHSATA_PORT_ID CONFIG_DW_ALTDESCRIPTOR -CONFIG_DW_AXI_BURST_LEN CONFIG_DW_GMAC_DEFAULT_DMA_PBL -CONFIG_DW_MAC_FORCE_THRESHOLD_MODE CONFIG_DW_WDT_BASE CONFIG_DW_WDT_CLOCK_KHZ CONFIG_E1000_NO_NVM CONFIG_E300 CONFIG_E5500 -CONFIG_ECC -CONFIG_EDB9301 -CONFIG_EDB93XX_INDUSTRIAL -CONFIG_EDB93XX_SDCS0 -CONFIG_EDB93XX_SDCS1 -CONFIG_EDB93XX_SDCS2 -CONFIG_EDB93XX_SDCS3 CONFIG_EFLASH_PROTSECTORS CONFIG_EHCI_DESC_BIG_ENDIAN CONFIG_EHCI_HCD_INIT_AFTER_RESET @@ -246,16 +144,10 @@ CONFIG_EHCI_MXS_PORT1 CONFIG_EMU CONFIG_ENABLE_36BIT_PHYS CONFIG_ENABLE_MMU -CONFIG_ENABLE_MUST_CHECK -CONFIG_ENV_ADDR_FLEX -CONFIG_ENV_CALLBACK_LIST_DEFAULT -CONFIG_ENV_CALLBACK_LIST_STATIC -CONFIG_ENV_FLAGS_LIST_DEFAULT CONFIG_ENV_FLAGS_LIST_STATIC CONFIG_ENV_IS_EMBEDDED CONFIG_ENV_MAX_ENTRIES CONFIG_ENV_MIN_ENTRIES -CONFIG_ENV_OFFSET_OOB CONFIG_ENV_RANGE CONFIG_ENV_REFLASH CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS @@ -263,34 +155,25 @@ CONFIG_ENV_SETTINGS_NAND_V1 CONFIG_ENV_SETTINGS_NAND_V2 CONFIG_ENV_SETTINGS_V1 CONFIG_ENV_SETTINGS_V2 -CONFIG_ENV_SIZE_FLEX CONFIG_ENV_SROM_BANK CONFIG_ENV_TOTAL_SIZE CONFIG_ENV_VERSION -CONFIG_EPH_POWER_EN -CONFIG_EPOLL CONFIG_ESBC_ADDR_64BIT CONFIG_ESBC_HDR_LS -CONFIG_ESDHC_DETECT_8_BIT_QUIRK CONFIG_ESDHC_DETECT_QUIRK CONFIG_ESDHC_HC_BLK_ADDR CONFIG_ESPRESSO7420 CONFIG_ET1100_BASE -CONFIG_ETHADDR CONFIG_ETHBASE CONFIG_ETHPRIME -CONFIG_ETH_BUFSIZE -CONFIG_ETH_RXSIZE CONFIG_EXTRA_CLOCK CONFIG_EXTRA_ENV CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS_COMMON -CONFIG_EXT_AHB2AHB_BASE CONFIG_EXT_AHBAPBBRG_BASE CONFIG_EXT_AHBPCIBRG_BASE CONFIG_EXT_AHBSLAVE01_BASE CONFIG_EXT_AHBSLAVE02_BASE -CONFIG_EXT_PHY CONFIG_EXT_USB_HOST_BASE CONFIG_EXYNOS4 CONFIG_EXYNOS4210 @@ -307,27 +190,12 @@ CONFIG_EXYNOS_SPL CONFIG_EXYNOS_TMU CONFIG_FACTORYSET CONFIG_FB_ADDR -CONFIG_FB_BACKLIGHT -CONFIG_FB_DEFERRED_IO CONFIG_FDTADDR CONFIG_FDTFILE -CONFIG_FEATURE_CLEAN_UP -CONFIG_FEATURE_COMMAND_EDITING -CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN -CONFIG_FEATURE_SH_EXTRA_QUIET -CONFIG_FEATURE_SH_FANCY_PROMPT -CONFIG_FEATURE_SH_STANDALONE_SHELL CONFIG_FEC_ENET_DEV CONFIG_FEC_FIXED_SPEED -CONFIG_FEC_MXC_25M_REF_CLK CONFIG_FEC_MXC_PHYADDR -CONFIG_FEC_MXC_SWAP_PACKET CONFIG_FEC_XCV_TYPE -CONFIG_FEROCEON -CONFIG_FEROCEON_88FR131 -CONFIG_FILE -CONFIG_FIXED_PHY -CONFIG_FIXED_PHY_ADDR CONFIG_FIXED_SDHCI_ALIGNED_BUFFER CONFIG_FLASH_BR_PRELIM CONFIG_FLASH_CFI_LEGACY @@ -337,16 +205,13 @@ CONFIG_FLASH_SHOW_PROGRESS CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FM_PLAT_CLK_DIV -CONFIG_FORCE_DDR_DATA_BUS_WIDTH_32 CONFIG_FORMIKE CONFIG_FPGA_COUNT -CONFIG_FPGA_DELAY CONFIG_FPGA_STRATIX_V CONFIG_FSL_CADMUS CONFIG_FSL_CORENET CONFIG_FSL_CPLD CONFIG_FSL_DCU_SII9022A -CONFIG_FSL_DEEP_SLEEP CONFIG_FSL_DEVICE_DISABLE CONFIG_FSL_DIU_CH7301 CONFIG_FSL_DIU_FB @@ -354,8 +219,6 @@ CONFIG_FSL_DSPI1 CONFIG_FSL_ESDHC_PIN_MUX CONFIG_FSL_FIXED_MMC_LOCATION CONFIG_FSL_FM_10GEC_REGULAR_NOTATION -CONFIG_FSL_I2C_CUSTOM_DFSR -CONFIG_FSL_I2C_CUSTOM_FDR CONFIG_FSL_IIM CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_LBC @@ -367,35 +230,25 @@ CONFIG_FSL_PMIC_CLK CONFIG_FSL_PMIC_CS CONFIG_FSL_PMIC_MODE CONFIG_FSL_QIXIS -CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT CONFIG_FSL_SATA_V2 CONFIG_FSL_SDHC_V2_3 -CONFIG_FSL_SDRAM_TYPE CONFIG_FSL_SERDES CONFIG_FSL_SERDES1 CONFIG_FSL_SERDES2 CONFIG_FSL_SGMII_RISER -CONFIG_FSL_TBCLK_EXTRA_DIV -CONFIG_FSL_TRUST_ARCH_v1 -CONFIG_FSNOTIFY -CONFIG_FS_POSIX_ACL CONFIG_FTAHBC020S CONFIG_FTAHBC020S_BASE CONFIG_FTAPBBRG020S_01_BASE CONFIG_FTCFC010_BASE CONFIG_FTDMAC020_BASE -CONFIG_FTGMAC100_BASE CONFIG_FTGPIO010_BASE -CONFIG_FTIDE020S_BASE CONFIG_FTIIC010_BASE CONFIG_FTINTC010_BASE CONFIG_FTLCDC100_BASE CONFIG_FTMAC100_BASE -CONFIG_FTMAC110_BASE CONFIG_FTPMU010 CONFIG_FTPMU010_BASE CONFIG_FTPMU010_POWER -CONFIG_FTPWM010_BASE CONFIG_FTRTC010_BASE CONFIG_FTRTC010_EXTCLK CONFIG_FTRTC010_PCLK @@ -406,22 +259,15 @@ CONFIG_FTSMC020_BASE CONFIG_FTSSP010_01_BASE CONFIG_FTSSP010_02_BASE CONFIG_FTTMR010_BASE -CONFIG_FTTMR010_EXT_CLK CONFIG_FTUART010_01_BASE CONFIG_FTUART010_02_BASE CONFIG_FTUART010_03_BASE CONFIG_FTWDT010_BASE CONFIG_FTWDT010_WATCHDOG -CONFIG_FZOTG266HD0A_BASE CONFIG_GATEWAYIP -CONFIG_GLOBAL_DATA_NOT_REG10 CONFIG_GLOBAL_TIMER CONFIG_GMII -CONFIG_GPCNTRL -CONFIG_GPIO_LED_INVERTED_TABLE -CONFIG_GPIO_LED_STUBS CONFIG_GREEN_LED -CONFIG_GURNARD_FPGA CONFIG_GURNARD_SPLASH CONFIG_G_DNL_THOR_PRODUCT_NUM CONFIG_G_DNL_THOR_VENDOR_NUM @@ -438,9 +284,7 @@ CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_HETROGENOUS_CLUSTERS CONFIG_HIDE_LOGO_VERSION CONFIG_HIKEY_GPIO -CONFIG_HITACHI_SX14 CONFIG_HOSTNAME -CONFIG_HOST_MAX_DEVICES CONFIG_HPS_ALTERAGRP_DBGATCLK CONFIG_HPS_ALTERAGRP_MAINCLK CONFIG_HPS_ALTERAGRP_MPUCLK @@ -589,67 +433,38 @@ CONFIG_HWCONFIG CONFIG_HW_ENV_SETTINGS CONFIG_I2C_ENV_EEPROM_BUS CONFIG_I2C_GSC -CONFIG_I2C_MBB_TIMEOUT CONFIG_I2C_MULTI_BUS CONFIG_I2C_MVTWSI CONFIG_I2C_MVTWSI_BASE CONFIG_I2C_MVTWSI_BASE0 CONFIG_I2C_MVTWSI_BASE1 -CONFIG_I2C_MVTWSI_BASE2 -CONFIG_I2C_MVTWSI_BASE3 -CONFIG_I2C_MVTWSI_BASE4 -CONFIG_I2C_MVTWSI_BASE5 -CONFIG_I2C_REPEATED_START CONFIG_I2C_RTC_ADDR -CONFIG_I2C_TIMEOUT CONFIG_ICACHE CONFIG_ICS307_REFCLK_HZ CONFIG_IDE_PREINIT CONFIG_IDE_RESET -CONFIG_IDE_SWAP_IO -CONFIG_IMA CONFIG_IMX CONFIG_IMX6_PWM_PER_CLK CONFIG_IMX_HDMI CONFIG_IMX_VIDEO_SKIP -CONFIG_INETSPACE_V2 -CONFIG_INI_ALLOW_MULTILINE -CONFIG_INI_CASE_INSENSITIVE -CONFIG_INI_MAX_LINE -CONFIG_INI_MAX_NAME -CONFIG_INI_MAX_SECTION -CONFIG_INTEGRITY CONFIG_INTERRUPTS CONFIG_IODELAY_RECALIBRATION CONFIG_IOMUX_LPSR CONFIG_IOMUX_SHARE_CONF_REG -CONFIG_IOS CONFIG_IO_TRACE CONFIG_IPADDR -CONFIG_IPROC CONFIG_IRAM_BASE CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_IRAM_STACK CONFIG_IRAM_TOP CONFIG_IRDA_BASE -CONFIG_IS_ENABLED -CONFIG_JFFS2_DEV -CONFIG_JFFS2_LZO -CONFIG_JFFS2_NAND -CONFIG_JFFS2_PART_OFFSET -CONFIG_JFFS2_PART_SIZE -CONFIG_JFFS2_SUMMARY CONFIG_JRSTARTR_JR0 -CONFIG_JTAG_CONSOLE CONFIG_KEEP_SERVERADDR -CONFIG_KEYBOARD CONFIG_KEY_REVOCATION CONFIG_KIRKWOOD_EGIGA_INIT -CONFIG_KIRKWOOD_GPIO CONFIG_KIRKWOOD_PCIE_INIT CONFIG_KIRKWOOD_RGMII_PAD_1V8 -CONFIG_KM8321 CONFIG_KMTEGR1 CONFIG_KM_BOARD_EXTRA_ENV CONFIG_KM_COGE5UN @@ -687,19 +502,11 @@ CONFIG_KSNET_NETCP_V1_5 CONFIG_KSNET_SERDES_LANES_PER_SGMII CONFIG_KSNET_SERDES_SGMII2_BASE CONFIG_KSNET_SERDES_SGMII_BASE -CONFIG_KVM_GUEST -CONFIG_KW88F6192 -CONFIG_KW88F6281 -CONFIG_KW88F6702 CONFIG_L1_INIT_RAM CONFIG_L2_CACHE -CONFIG_LAN91C96_USE_32_BIT CONFIG_LAYERSCAPE_NS_ACCESS CONFIG_LBA48 -CONFIG_LBDAF CONFIG_LCD_ALIGNMENT -CONFIG_LCD_BMP_RLE8 -CONFIG_LCD_DT_SIMPLEFB CONFIG_LCD_INFO CONFIG_LCD_INFO_BELOW_LOGO CONFIG_LCD_IN_PSRAM @@ -708,14 +515,10 @@ CONFIG_LCD_MENU CONFIG_LD9040 CONFIG_LEGACY CONFIG_LEGACY_BOOTCMD_ENV -CONFIG_LITTLETON_LCD -CONFIG_LMS283GF05 CONFIG_LOADS_ECHO CONFIG_LOWPOWER_ADDR CONFIG_LOWPOWER_FLAG -CONFIG_LOW_MCFCLK CONFIG_LPC32XX_ETH -CONFIG_LPC32XX_ETH_BUFS_BASE CONFIG_LPC32XX_HSUART CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY CONFIG_LPC32XX_NAND_MLC_NAND_TA @@ -732,90 +535,41 @@ CONFIG_LPC32XX_NAND_SLC_WDR_CLKS CONFIG_LPC32XX_NAND_SLC_WHOLD CONFIG_LPC32XX_NAND_SLC_WSETUP CONFIG_LPC32XX_NAND_SLC_WWIDTH -CONFIG_LPC_BASE -CONFIG_LPC_IO_BASE CONFIG_LPUART CONFIG_LPUART_32B_REG -CONFIG_LQ038J7DH53 CONFIG_LS102XA_STREAM_ID CONFIG_LSCHLV2 CONFIG_LSXHL -CONFIG_M41T94_SPI_CS -CONFIG_M520x -CONFIG_M5301x CONFIG_MACB_SEARCH_PHY -CONFIG_MACRESET_TIMEOUT CONFIG_MALLOC_F_ADDR CONFIG_MALTA -CONFIG_MARCO_MEMSET -CONFIG_MASK_AER_AO CONFIG_MAX_DSP_CPUS -CONFIG_MAX_FPGA_DEVICES CONFIG_MAX_MEM_MAPPED -CONFIG_MAX_PKT CONFIG_MAX_RAM_BANK_SIZE -CONFIG_MCF5249 -CONFIG_MCF5253 CONFIG_MCFRTC CONFIG_MCFTMR -CONFIG_MDIO_TIMEOUT CONFIG_MEMSIZE_IN_BYTES -CONFIG_MEM_HOLE_16M CONFIG_MEM_INIT_VALUE CONFIG_MEM_REMAP CONFIG_MFG_ENV_SETTINGS CONFIG_MII_DEFAULT_TSEC CONFIG_MII_INIT -CONFIG_MIPS_HUGE_TLB_SUPPORT -CONFIG_MIPS_MT_FPAFF CONFIG_MISC_COMMON -CONFIG_MIU_1BIT_INTERLEAVED CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MIU_2BIT_INTERLEAVED -CONFIG_MIU_LINEAR CONFIG_MMCROOT CONFIG_MMC_DEFAULT_DEV -CONFIG_MMC_RPMB_TRACE CONFIG_MMC_SUNXI_SLOT -CONFIG_MMU CONFIG_MONITOR_IS_IN_RAM -CONFIG_MPC83XX_GPIO_0_INIT_DIRECTION -CONFIG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN -CONFIG_MPC83XX_GPIO_0_INIT_VALUE -CONFIG_MPC83XX_GPIO_1_INIT_DIRECTION -CONFIG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN -CONFIG_MPC83XX_GPIO_1_INIT_VALUE CONFIG_MPC85XX_FEC CONFIG_MPC85XX_FEC_NAME -CONFIG_MPC8xxx_DISABLE_BPTR CONFIG_MTD_CONCAT -CONFIG_MTD_NAND_MUSEUM_IDS CONFIG_MTD_NAND_VERIFY_WRITE -CONFIG_MTD_ONENAND_VERIFY_WRITE CONFIG_MTD_PARTITION -CONFIG_MTD_UBI_BEB_RESERVE -CONFIG_MTD_UBI_BLOCK -CONFIG_MTD_UBI_DEBUG -CONFIG_MTD_UBI_DEBUG_MSG -CONFIG_MTD_UBI_DEBUG_MSG_BLD -CONFIG_MTD_UBI_DEBUG_MSG_EBA -CONFIG_MTD_UBI_DEBUG_MSG_IO -CONFIG_MTD_UBI_DEBUG_MSG_WL -CONFIG_MTD_UBI_DEBUG_PARANOID -CONFIG_MTD_UBI_GLUEBI -CONFIG_MTD_UBI_MODULE -CONFIG_MULTI_CS CONFIG_MVGBE_PORTS -CONFIG_MVMFP_V2 CONFIG_MVS -CONFIG_MV_ETH_RXQ -CONFIG_MV_I2C_NUM -CONFIG_MV_I2C_REG CONFIG_MX27 CONFIG_MX27_CLK32 -CONFIG_MX27_TIMER_HIGH_PRECISION -CONFIG_MX28_FEC_MAC_IN_OCOTP -CONFIG_MXC_EPDC CONFIG_MXC_GPT_HCLK CONFIG_MXC_NAND_HWECC CONFIG_MXC_NAND_IP_REGS_BASE @@ -828,61 +582,31 @@ CONFIG_MXS CONFIG_MXS_AUART CONFIG_MXS_AUART_BASE CONFIG_MXS_OCOTP -CONFIG_MY_OPTION CONFIG_NANDFLASH_SIZE CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC CONFIG_NAND_CS_INIT -CONFIG_NAND_DATA_REG CONFIG_NAND_ECC_BCH -CONFIG_NAND_ENV_DST CONFIG_NAND_KIRKWOOD CONFIG_NAND_KMETER1 -CONFIG_NAND_MODE_REG CONFIG_NAND_OMAP_GPMC_WSCFG CONFIG_NAND_SECBOOT CONFIG_NAND_SPL -CONFIG_NAND_U_BOOT -CONFIG_NATSEMI -CONFIG_NCEL2C100_BASE -CONFIG_NCEMIC100_BASE -CONFIG_NDS_DLM1_BASE -CONFIG_NDS_DLM2_BASE -CONFIG_NEO -CONFIG_NET2BIG_V2 -CONFIG_NETCONSOLE_BUFFER_SIZE CONFIG_NETDEV CONFIG_NETMASK -CONFIG_NETSPACE_LITE_V2 -CONFIG_NETSPACE_MAX_V2 -CONFIG_NETSPACE_MINI_V2 -CONFIG_NETSPACE_V2 -CONFIG_NET_MULTI CONFIG_NET_RETRY_COUNT CONFIG_NEVER_ASSERT_ODT_TO_CPU -CONFIG_NFSBOOTCOMMAND CONFIG_NFS_TIMEOUT CONFIG_NOBQFMAN -CONFIG_NON_SECURE CONFIG_NORBOOT CONFIG_NORFLASH_PS32BIT -CONFIG_NO_ETH -CONFIG_NO_WAIT CONFIG_NS16550_MIN_FUNCTIONS -CONFIG_NS8382X CONFIG_NUM_DSP_CPUS -CONFIG_NUM_PAMU CONFIG_ODROID_REV_AIN -CONFIG_OFF_PADCONF CONFIG_ORIGEN CONFIG_OTHBOOTARGS CONFIG_OVERWRITE_ETHADDR_ONCE -CONFIG_PALMAS_AUDPWR CONFIG_PALMAS_POWER -CONFIG_PALMAS_SMPS7_FPWM -CONFIG_PALMAS_USB_SS_PWR -CONFIG_PARAVIRT CONFIG_PCA953X -CONFIG_PCA9698 CONFIG_PCI1 CONFIG_PCI2 CONFIG_PCIE @@ -893,11 +617,8 @@ CONFIG_PCIE4 CONFIG_PCIE_IMX CONFIG_PCIE_IMX_PERST_GPIO CONFIG_PCIE_IMX_POWER_GPIO -CONFIG_PCI_BOOTDELAY CONFIG_PCI_CLK_FREQ CONFIG_PCI_CONFIG_HOST_BRIDGE -CONFIG_PCI_EHCI_DEVICE -CONFIG_PCI_EHCI_DEVNO CONFIG_PCI_GT64120 CONFIG_PCI_IO_BUS CONFIG_PCI_IO_PHYS @@ -906,28 +627,19 @@ CONFIG_PCI_MEM_BUS CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_SIZE CONFIG_PCI_MSC01 -CONFIG_PCI_NOSCAN CONFIG_PCI_OHCI -CONFIG_PCI_OHCI_DEVNO CONFIG_PCI_PREF_BUS CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_SIZE CONFIG_PCI_SCAN_SHOW -CONFIG_PCI_SYS_BUS -CONFIG_PCI_SYS_PHYS -CONFIG_PCI_SYS_SIZE CONFIG_PEN_ADDR_BIG_ENDIAN -CONFIG_PHYSMEM CONFIG_PHY_BASE_ADR CONFIG_PHY_ET1011C_TX_CLK_FIX CONFIG_PHY_ID CONFIG_PHY_INTERFACE_MODE CONFIG_PHY_IRAM_BASE -CONFIG_PHY_MODE_NEED_CHANGE CONFIG_PHY_RESET_DELAY -CONFIG_PIXIS_SGMII_CMD CONFIG_PL011_CLOCK -CONFIG_PL011_SERIAL_RLCR CONFIG_PL01x_PORTS CONFIG_PM CONFIG_PMC_BR_PRELIM @@ -935,24 +647,15 @@ CONFIG_PMC_OR_PRELIM CONFIG_PME_PLAT_CLK_DIV CONFIG_PMU CONFIG_PMW_BASE -CONFIG_PM_SLEEP CONFIG_POST CONFIG_POSTBOOTMENU -CONFIG_POST_BSPEC1 -CONFIG_POST_BSPEC2 -CONFIG_POST_BSPEC3 -CONFIG_POST_BSPEC4 -CONFIG_POST_BSPEC5 CONFIG_POST_EXTERNAL_WORD_FUNCS CONFIG_POST_SKIP_ENV_FLAGS -CONFIG_POST_UART -CONFIG_POST_WATCHDOG CONFIG_POWER_FSL CONFIG_POWER_FSL_MC13892 CONFIG_POWER_HI6553 CONFIG_POWER_LTC3676 CONFIG_POWER_LTC3676_I2C_ADDR -CONFIG_POWER_MAX77696_I2C_ADDR CONFIG_POWER_PFUZE100 CONFIG_POWER_PFUZE100_I2C_ADDR CONFIG_POWER_PFUZE3000 @@ -963,26 +666,18 @@ CONFIG_POWER_TPS65090_EC CONFIG_POWER_TPS65217 CONFIG_POWER_TPS65218 CONFIG_POWER_TPS65910 -CONFIG_PPC64BRIDGE CONFIG_PPC_CLUSTER_START CONFIG_PPC_SPINTABLE_COMPATIBLE CONFIG_PRAM -CONFIG_PRINTK -CONFIG_PROC_FS -CONFIG_PROFILE_ALL_BRANCHES -CONFIG_PROFILING CONFIG_PSRAM_SCFG CONFIG_PWM CONFIG_PXA_LCD CONFIG_PXA_PWR_I2C CONFIG_PXA_STD_I2C CONFIG_PXA_VGA -CONFIG_PXA_VIDEO CONFIG_QBMAN_CLK_DIV CONFIG_QIXIS_I2C_ACCESS CONFIG_QSPI -CONFIG_QUOTA -CONFIG_RAMBOOTCOMMAND CONFIG_RAMBOOT_NAND CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE @@ -990,11 +685,8 @@ CONFIG_RAMDISKFILE CONFIG_RAMDISK_ADDR CONFIG_RAMDISK_BOOT CONFIG_RD_LVL -CONFIG_REALMODE_DEBUG CONFIG_RED_LED -CONFIG_REG CONFIG_REMAKE_ELF -CONFIG_REQ CONFIG_RESERVED_01_BASE CONFIG_RESERVED_02_BASE CONFIG_RESERVED_03_BASE @@ -1005,50 +697,29 @@ CONFIG_RESET_VECTOR_ADDRESS CONFIG_RESTORE_FLASH CONFIG_RES_BLOCK_SIZE CONFIG_RMII -CONFIG_RMSTP0_ENA -CONFIG_RMSTP10_ENA -CONFIG_RMSTP11_ENA -CONFIG_RMSTP1_ENA -CONFIG_RMSTP2_ENA -CONFIG_RMSTP3_ENA -CONFIG_RMSTP4_ENA -CONFIG_RMSTP5_ENA -CONFIG_RMSTP6_ENA -CONFIG_RMSTP7_ENA -CONFIG_RMSTP8_ENA -CONFIG_RMSTP9_ENA CONFIG_ROCKCHIP_CHIP_TAG CONFIG_ROCKCHIP_MAX_INIT_SIZE CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_ROCKCHIP_STIMER_BASE -CONFIG_ROM_STUBS CONFIG_ROOTPATH CONFIG_RTC_DS1337 CONFIG_RTC_DS1337_NOOSC CONFIG_RTC_DS1338 -CONFIG_RTC_DS1339_TCR_VAL CONFIG_RTC_DS1374 -CONFIG_RTC_DS1388 -CONFIG_RTC_DS1388_TCR_VAL CONFIG_RTC_DS3231 CONFIG_RTC_FTRTC010 -CONFIG_RTC_M41T11 CONFIG_RTC_MC13XXX CONFIG_RTC_MCFRRTC -CONFIG_RTC_MCP79411 CONFIG_RTC_MXS CONFIG_RTC_PT7C4338 -CONFIG_RX_DESCR_NUM CONFIG_S5P CONFIG_S5PC100 CONFIG_S5PC110 CONFIG_S5P_PA_SYSRAM -CONFIG_S6E8AX0 CONFIG_SAMA5D3_LCD_BASE CONFIG_SAMSUNG CONFIG_SAMSUNG_ONENAND CONFIG_SANDBOX_ARCH -CONFIG_SANDBOX_BIG_ENDIAN CONFIG_SANDBOX_SDL CONFIG_SANDBOX_SPI_MAX_BUS CONFIG_SANDBOX_SPI_MAX_CS @@ -1056,37 +727,24 @@ CONFIG_SAR2_REG CONFIG_SAR_REG CONFIG_SATA1 CONFIG_SATA2 -CONFIG_SATA_ULI5288 -CONFIG_SCF0403_LCD CONFIG_SCIF_A -CONFIG_SCIF_USE_EXT_CLK CONFIG_SCSI_AHCI_PLAT CONFIG_SCSI_DEV_LIST CONFIG_SC_TIMER_CLK CONFIG_SDCARD CONFIG_SDRAM_OFFSET_FOR_RT -CONFIG_SD_BOOT_QSPI CONFIG_SECBOOT CONFIG_SECURE_BL1_ONLY -CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ -CONFIG_SECURITY CONFIG_SEC_FW_SIZE CONFIG_SERIAL_BOOT CONFIG_SERIAL_FLASH -CONFIG_SERIAL_HW_FLOW_CONTROL CONFIG_SERIAL_SOFTWARE_FIFO -CONFIG_SERIRQ_CONTINUOUS_MODE CONFIG_SERVERIP CONFIG_SETUP_INITRD_TAG CONFIG_SET_BOOTARGS CONFIG_SET_DFU_ALT_BUF_LEN -CONFIG_SGI_IP28 CONFIG_SH73A0 CONFIG_SH7751_PCI -CONFIG_SHARP_LM8V31 -CONFIG_SHEEVA_88SV131 -CONFIG_SH_CMT_CLK_FREQ -CONFIG_SH_DSP CONFIG_SH_ETHER_ALIGNE_SIZE CONFIG_SH_ETHER_BASE_ADDR CONFIG_SH_ETHER_CACHE_INVALIDATE @@ -1096,49 +754,28 @@ CONFIG_SH_ETHER_PHY_MODE CONFIG_SH_ETHER_SH7734_MII CONFIG_SH_ETHER_USE_PORT CONFIG_SH_GPIO_PFC -CONFIG_SH_MMCIF_CLK CONFIG_SH_QSPI_BASE CONFIG_SH_SCIF_CLK_FREQ -CONFIG_SH_SDHI_FREQ -CONFIG_SH_SDRAM_OFFSET CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION CONFIG_SKIP_TRUNOFF_WATCHDOG CONFIG_SLIC -CONFIG_SLTTMR CONFIG_SMC91111 CONFIG_SMC91111_BASE CONFIG_SMC91111_EXT_PHY -CONFIG_SMC_AUTONEG_TIMEOUT CONFIG_SMC_USE_32_BIT -CONFIG_SMC_USE_IOFUNCS CONFIG_SMDK5420 CONFIG_SMP_PEN_ADDR CONFIG_SMSC_LPC47M CONFIG_SMSC_SIO1007 -CONFIG_SMSTP0_ENA -CONFIG_SMSTP10_ENA -CONFIG_SMSTP11_ENA -CONFIG_SMSTP1_ENA -CONFIG_SMSTP2_ENA -CONFIG_SMSTP3_ENA -CONFIG_SMSTP4_ENA -CONFIG_SMSTP5_ENA -CONFIG_SMSTP6_ENA -CONFIG_SMSTP7_ENA -CONFIG_SMSTP8_ENA -CONFIG_SMSTP9_ENA CONFIG_SOCRATES -CONFIG_SOC_OMAP3430 CONFIG_SOFT_I2C_READ_REPEATED_START CONFIG_SPD_EEPROM CONFIG_SPIFLASH CONFIG_SPI_ADDR CONFIG_SPI_BOOTING -CONFIG_SPI_DATAFLASH_WRITE_VERIFY CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX -CONFIG_SPI_IDLE_VAL CONFIG_SPI_N25Q256A_RESET CONFIG_SPL_ATMEL_SIZE CONFIG_SPL_BOARD_LOAD_IMAGE @@ -1149,29 +786,20 @@ CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_CMT CONFIG_SPL_CMT_DEBUG CONFIG_SPL_COMMON_INIT_DDR -CONFIG_SPL_CONSOLE -CONFIG_SPL_ETH_DEVICE CONFIG_SPL_FLUSH_IMAGE CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SPL_GD_ADDR CONFIG_SPL_INIT_MINIMAL -CONFIG_SPL_JR0_LIODN_NS -CONFIG_SPL_JR0_LIODN_S CONFIG_SPL_MAX_FOOTPRINT -CONFIG_SPL_MAX_PEB_SIZE CONFIG_SPL_MAX_SIZE -CONFIG_SPL_MXS_PSWITCH_WAIT CONFIG_SPL_NAND_INIT CONFIG_SPL_NAND_MINIMAL CONFIG_SPL_NAND_RAW_ONLY CONFIG_SPL_NAND_SOFTECC -CONFIG_SPL_NAND_WORKSPACE CONFIG_SPL_PAD_TO -CONFIG_SPL_PANIC_ON_RAW_IMAGE CONFIG_SPL_PBL_PAD -CONFIG_SPL_PPAACT_ADDR CONFIG_SPL_RELOC_MALLOC_ADDR CONFIG_SPL_RELOC_MALLOC_SIZE CONFIG_SPL_RELOC_STACK @@ -1179,14 +807,12 @@ CONFIG_SPL_RELOC_TEXT_BASE CONFIG_SPL_SATA_BOOT_DEVICE CONFIG_SPL_SIZE CONFIG_SPL_SKIP_RELOCATE -CONFIG_SPL_SPAACT_ADDR CONFIG_SPL_SPI_FLASH_MINIMAL CONFIG_SPL_STACK CONFIG_SPL_STACK_ADDR CONFIG_SPL_STACK_SIZE CONFIG_SPL_START_S_PATH CONFIG_SPL_TARGET -CONFIG_SPL_UBOOT_KEY_HASH CONFIG_SRAM_BASE CONFIG_SRAM_SIZE CONFIG_SRIO1 @@ -1202,28 +828,19 @@ CONFIG_SRIO_PCIE_BOOT_SLAVE CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE -CONFIG_SSE2 CONFIG_STACKBASE CONFIG_STANDALONE_LOAD_ADDR -CONFIG_STATIC_BOARD_REV CONFIG_STD_DEVICES_SETTINGS -CONFIG_SXNI855T -CONFIG_SYSFS -CONFIG_SYSMGR_ISWGRP_HANDOFF CONFIG_SYS_64BIT CONFIG_SYS_64BIT_LBA CONFIG_SYS_83XX_DDR_USES_CS0 -CONFIG_SYS_ADDRESS_MAP_A CONFIG_SYS_AMASK0 -CONFIG_SYS_AMASK0_FINAL CONFIG_SYS_AMASK1 CONFIG_SYS_AMASK1_FINAL CONFIG_SYS_AMASK2 CONFIG_SYS_AMASK2_FINAL CONFIG_SYS_AMASK3 -CONFIG_SYS_AMASK3_FINAL CONFIG_SYS_AMASK4 -CONFIG_SYS_AMASK5 CONFIG_SYS_AMASK6 CONFIG_SYS_AMASK7 CONFIG_SYS_AT91_MAIN_CLOCK @@ -1235,10 +852,8 @@ CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_ATA_IDE0_OFFSET CONFIG_SYS_ATA_IDE1_OFFSET -CONFIG_SYS_ATA_PORT_ADDR CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_STRIDE -CONFIG_SYS_ATMEL_CPU_NAME CONFIG_SYS_AUTOLOAD CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION CONFIG_SYS_AUXCORE_BOOTDATA @@ -1247,8 +862,6 @@ CONFIG_SYS_BAUDRATE_TABLE CONFIG_SYS_BCSR CONFIG_SYS_BFTIC3_BASE CONFIG_SYS_BFTIC3_SIZE -CONFIG_SYS_BITBANG_PHY_PORT -CONFIG_SYS_BITBANG_PHY_PORTS CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_CENA_SIZE CONFIG_SYS_BMAN_CINH_BASE @@ -1260,11 +873,9 @@ CONFIG_SYS_BMAN_NUM_PORTALS CONFIG_SYS_BMAN_SP_CENA_SIZE CONFIG_SYS_BMAN_SP_CINH_SIZE CONFIG_SYS_BMAN_SWP_ISDR_REG -CONFIG_SYS_BOARD_NAME CONFIG_SYS_BOOK3E_HV CONFIG_SYS_BOOTCOUNT_BE CONFIG_SYS_BOOTCOUNT_LE -CONFIG_SYS_BOOTFILE_PREFIX CONFIG_SYS_BOOTMAPSZ CONFIG_SYS_BOOTM_LEN CONFIG_SYS_BOOTPARAMS_LEN @@ -1273,15 +884,9 @@ CONFIG_SYS_BOOT_RAMDISK_HIGH CONFIG_SYS_CACHE_ACR0 CONFIG_SYS_CACHE_ACR1 CONFIG_SYS_CACHE_ACR2 -CONFIG_SYS_CACHE_ACR3 -CONFIG_SYS_CACHE_ACR4 -CONFIG_SYS_CACHE_ACR5 -CONFIG_SYS_CACHE_ACR6 -CONFIG_SYS_CACHE_ACR7 CONFIG_SYS_CACHE_DCACR CONFIG_SYS_CACHE_ICACR CONFIG_SYS_CACHE_STASHING -CONFIG_SYS_CADMUS_BASE_REG CONFIG_SYS_CBSIZE CONFIG_SYS_CCCR CONFIG_SYS_CCSRBAR @@ -1289,20 +894,10 @@ CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_HIGH CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSR_DO_NOT_RELOCATE -CONFIG_SYS_CFI_FLASH_CONFIG_REGS CONFIG_SYS_CFI_FLASH_STATUS_POLL -CONFIG_SYS_CF_INTC_REG1 -CONFIG_SYS_CH7301_I2C CONFIG_SYS_CKEN CONFIG_SYS_CLK CONFIG_SYS_CLKTL_CBCDR -CONFIG_SYS_CLK_FREQ_C100 -CONFIG_SYS_CLK_FREQ_C110 -CONFIG_SYS_CMD_CONFIGURE -CONFIG_SYS_CMD_EL -CONFIG_SYS_CMD_IAS -CONFIG_SYS_CMD_INT -CONFIG_SYS_CMD_SUSPEND CONFIG_SYS_CORE_SRAM CONFIG_SYS_CORE_SRAM_SIZE CONFIG_SYS_CPC_REINIT_F @@ -1317,7 +912,6 @@ CONFIG_SYS_CPLD_FTIM1 CONFIG_SYS_CPLD_FTIM2 CONFIG_SYS_CPLD_FTIM3 CONFIG_SYS_CPLD_SIZE -CONFIG_SYS_CPM_INTERRUPT CONFIG_SYS_CPRI CONFIG_SYS_CPRI_CLK CONFIG_SYS_CPUSPEED @@ -1351,50 +945,25 @@ CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_CS3_MASK -CONFIG_SYS_CS4_BASE -CONFIG_SYS_CS4_CTRL CONFIG_SYS_CS4_FTIM0 CONFIG_SYS_CS4_FTIM1 CONFIG_SYS_CS4_FTIM2 CONFIG_SYS_CS4_FTIM3 -CONFIG_SYS_CS4_MASK -CONFIG_SYS_CS5_BASE -CONFIG_SYS_CS5_CTRL -CONFIG_SYS_CS5_FTIM0 -CONFIG_SYS_CS5_FTIM1 -CONFIG_SYS_CS5_FTIM2 -CONFIG_SYS_CS5_FTIM3 -CONFIG_SYS_CS5_MASK -CONFIG_SYS_CS6_BASE -CONFIG_SYS_CS6_CTRL CONFIG_SYS_CS6_FTIM0 CONFIG_SYS_CS6_FTIM1 CONFIG_SYS_CS6_FTIM2 CONFIG_SYS_CS6_FTIM3 -CONFIG_SYS_CS6_MASK -CONFIG_SYS_CS7_BASE -CONFIG_SYS_CS7_CTRL CONFIG_SYS_CS7_FTIM0 CONFIG_SYS_CS7_FTIM1 CONFIG_SYS_CS7_FTIM2 CONFIG_SYS_CS7_FTIM3 -CONFIG_SYS_CS7_MASK CONFIG_SYS_CSOR0 -CONFIG_SYS_CSOR0_EXT CONFIG_SYS_CSOR1 -CONFIG_SYS_CSOR1_EXT CONFIG_SYS_CSOR2 -CONFIG_SYS_CSOR2_EXT CONFIG_SYS_CSOR3 -CONFIG_SYS_CSOR3_EXT CONFIG_SYS_CSOR4 -CONFIG_SYS_CSOR4_EXT -CONFIG_SYS_CSOR5 -CONFIG_SYS_CSOR5_EXT CONFIG_SYS_CSOR6 -CONFIG_SYS_CSOR6_EXT CONFIG_SYS_CSOR7 -CONFIG_SYS_CSOR7_EXT CONFIG_SYS_CSPR0 CONFIG_SYS_CSPR0_EXT CONFIG_SYS_CSPR0_FINAL @@ -1409,8 +978,6 @@ CONFIG_SYS_CSPR3_EXT CONFIG_SYS_CSPR3_FINAL CONFIG_SYS_CSPR4 CONFIG_SYS_CSPR4_EXT -CONFIG_SYS_CSPR5 -CONFIG_SYS_CSPR5_EXT CONFIG_SYS_CSPR6 CONFIG_SYS_CSPR6_EXT CONFIG_SYS_CSPR7 @@ -1423,32 +990,14 @@ CONFIG_SYS_DA850_DDR2_SDRCR CONFIG_SYS_DA850_DDR2_SDTIMR CONFIG_SYS_DA850_DDR2_SDTIMR2 CONFIG_SYS_DA850_PLL0_PLLM -CONFIG_SYS_DA850_PLL0_PREDIV CONFIG_SYS_DA850_PLL1_PLLM CONFIG_SYS_DA850_SYSCFG_SUSPSRC -CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT CONFIG_SYS_DAVINCI_I2C_SLAVE CONFIG_SYS_DAVINCI_I2C_SLAVE1 CONFIG_SYS_DAVINCI_I2C_SLAVE2 CONFIG_SYS_DAVINCI_I2C_SPEED CONFIG_SYS_DAVINCI_I2C_SPEED1 CONFIG_SYS_DAVINCI_I2C_SPEED2 -CONFIG_SYS_DBAT0L -CONFIG_SYS_DBAT0U -CONFIG_SYS_DBAT1L -CONFIG_SYS_DBAT1U -CONFIG_SYS_DBAT2L -CONFIG_SYS_DBAT2U -CONFIG_SYS_DBAT3L -CONFIG_SYS_DBAT3U -CONFIG_SYS_DBAT4L -CONFIG_SYS_DBAT4U -CONFIG_SYS_DBAT5L -CONFIG_SYS_DBAT5U -CONFIG_SYS_DBAT6L -CONFIG_SYS_DBAT6U -CONFIG_SYS_DBAT7L -CONFIG_SYS_DBAT7U CONFIG_SYS_DCACHE_INV CONFIG_SYS_DCSRBAR CONFIG_SYS_DCSRBAR_PHYS @@ -1456,18 +1005,8 @@ CONFIG_SYS_DCSR_COP_CCP_ADDR CONFIG_SYS_DCSR_DCFG_ADDR CONFIG_SYS_DCSR_DCFG_OFFSET CONFIG_SYS_DCU_ADDR -CONFIG_SYS_DDR2_CS0_BNDS -CONFIG_SYS_DDR2_CS0_CONFIG -CONFIG_SYS_DDR2_CS1_BNDS -CONFIG_SYS_DDR2_CS1_CONFIG -CONFIG_SYS_DDR2_CS2_BNDS -CONFIG_SYS_DDR2_CS2_CONFIG -CONFIG_SYS_DDR2_CS3_BNDS -CONFIG_SYS_DDR2_CS3_CONFIG CONFIG_SYS_DDRCDR CONFIG_SYS_DDRCDR_VALUE -CONFIG_SYS_DDRD -CONFIG_SYS_DDRTC CONFIG_SYS_DDRUA CONFIG_SYS_DDR_BLOCK1_SIZE CONFIG_SYS_DDR_BLOCK2_BASE @@ -1475,52 +1014,34 @@ CONFIG_SYS_DDR_CLKSEL CONFIG_SYS_DDR_CLK_CNTL CONFIG_SYS_DDR_CLK_CONTROL CONFIG_SYS_DDR_CLK_CTRL -CONFIG_SYS_DDR_CLK_CTRL_1000 -CONFIG_SYS_DDR_CLK_CTRL_1200 CONFIG_SYS_DDR_CLK_CTRL_667 CONFIG_SYS_DDR_CLK_CTRL_800 -CONFIG_SYS_DDR_CLK_CTRL_900 CONFIG_SYS_DDR_CONFIG CONFIG_SYS_DDR_CONFIG_2 CONFIG_SYS_DDR_CONFIG_256 CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_2 -CONFIG_SYS_DDR_CPO CONFIG_SYS_DDR_CS0_BNDS CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_2 CONFIG_SYS_DDR_CS1_BNDS CONFIG_SYS_DDR_CS1_CONFIG CONFIG_SYS_DDR_CS1_CONFIG_2 -CONFIG_SYS_DDR_CS2_BNDS -CONFIG_SYS_DDR_CS2_CONFIG -CONFIG_SYS_DDR_CS3_BNDS -CONFIG_SYS_DDR_CS3_CONFIG CONFIG_SYS_DDR_DATA_INIT CONFIG_SYS_DDR_INIT_ADDR CONFIG_SYS_DDR_INIT_EXT_ADDR CONFIG_SYS_DDR_INTERVAL -CONFIG_SYS_DDR_INTERVAL_1000 -CONFIG_SYS_DDR_INTERVAL_1200 CONFIG_SYS_DDR_INTERVAL_667 CONFIG_SYS_DDR_INTERVAL_800 -CONFIG_SYS_DDR_INTERVAL_900 CONFIG_SYS_DDR_MODE CONFIG_SYS_DDR_MODE2 CONFIG_SYS_DDR_MODE_1 -CONFIG_SYS_DDR_MODE_1_1000 -CONFIG_SYS_DDR_MODE_1_1200 CONFIG_SYS_DDR_MODE_1_667 CONFIG_SYS_DDR_MODE_1_800 -CONFIG_SYS_DDR_MODE_1_900 CONFIG_SYS_DDR_MODE_2 -CONFIG_SYS_DDR_MODE_2_1000 -CONFIG_SYS_DDR_MODE_2_1200 CONFIG_SYS_DDR_MODE_2_667 CONFIG_SYS_DDR_MODE_2_800 -CONFIG_SYS_DDR_MODE_2_900 CONFIG_SYS_DDR_MODE_CONTROL -CONFIG_SYS_DDR_MODE_WEAK CONFIG_SYS_DDR_RAW_TIMING CONFIG_SYS_DDR_RCW_1 CONFIG_SYS_DDR_RCW_2 @@ -1531,53 +1052,31 @@ CONFIG_SYS_DDR_SDRAM_CLK_CNTL CONFIG_SYS_DDR_SIZE CONFIG_SYS_DDR_SR_CNTR CONFIG_SYS_DDR_TIMING_0 -CONFIG_SYS_DDR_TIMING_0_1000 -CONFIG_SYS_DDR_TIMING_0_1200 CONFIG_SYS_DDR_TIMING_0_667 CONFIG_SYS_DDR_TIMING_0_800 -CONFIG_SYS_DDR_TIMING_0_900 CONFIG_SYS_DDR_TIMING_1 -CONFIG_SYS_DDR_TIMING_1_1000 -CONFIG_SYS_DDR_TIMING_1_1200 CONFIG_SYS_DDR_TIMING_1_667 CONFIG_SYS_DDR_TIMING_1_800 -CONFIG_SYS_DDR_TIMING_1_900 CONFIG_SYS_DDR_TIMING_2 -CONFIG_SYS_DDR_TIMING_2_1000 -CONFIG_SYS_DDR_TIMING_2_1200 CONFIG_SYS_DDR_TIMING_2_667 CONFIG_SYS_DDR_TIMING_2_800 -CONFIG_SYS_DDR_TIMING_2_900 CONFIG_SYS_DDR_TIMING_3 -CONFIG_SYS_DDR_TIMING_3_1000 -CONFIG_SYS_DDR_TIMING_3_1200 CONFIG_SYS_DDR_TIMING_3_667 CONFIG_SYS_DDR_TIMING_3_800 -CONFIG_SYS_DDR_TIMING_3_900 CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_5 -CONFIG_SYS_DDR_WRITE_DATA_DELAY -CONFIG_SYS_DDR_WRLVL_CNTL CONFIG_SYS_DDR_WRLVL_CONTROL CONFIG_SYS_DDR_WRLVL_CONTROL_667 CONFIG_SYS_DDR_WRLVL_CONTROL_800 -CONFIG_SYS_DDR_ZQ_CNTL CONFIG_SYS_DDR_ZQ_CONTROL CONFIG_SYS_DEBUG CONFIG_SYS_DEBUG_SERVER_FW_ADDR CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -CONFIG_SYS_DEFAULT_VIDEO_MODE CONFIG_SYS_DIALOG_PMIC_I2C_ADDR -CONFIG_SYS_DIMM_SLOTS_PER_CTLR -CONFIG_SYS_DIRECT_FLASH_NFS CONFIG_SYS_DIRECT_FLASH_TFTP CONFIG_SYS_DISCOVER_PHY CONFIG_SYS_DIU_ADDR -CONFIG_SYS_DP501_BASE -CONFIG_SYS_DP501_DIFFERENTIAL -CONFIG_SYS_DP501_I2C -CONFIG_SYS_DP501_VCAPCTRL0 CONFIG_SYS_DPAA_DCE CONFIG_SYS_DPAA_FMAN CONFIG_SYS_DPAA_PME @@ -1587,24 +1086,17 @@ CONFIG_SYS_DP_DDR_BASE_PHY CONFIG_SYS_DRAM_BASE CONFIG_SYS_DRAM_SIZE CONFIG_SYS_DRAM_TEST -CONFIG_SYS_DSPI_CS0 -CONFIG_SYS_DSPI_CS2 CONFIG_SYS_DSPI_CTAR0 CONFIG_SYS_DSPI_CTAR1 CONFIG_SYS_DSPI_CTAR2 CONFIG_SYS_DSPI_CTAR3 CONFIG_SYS_DV_NOR_BOOT_CFG -CONFIG_SYS_EBI_CFGR_VAL -CONFIG_SYS_EBI_CSA_VAL CONFIG_SYS_EEPROM_BUS_NUM CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE CONFIG_SYS_EEPROM_WREN CONFIG_SYS_EHCI_USB1_ADDR -CONFIG_SYS_ELO3_DMA3 -CONFIG_SYS_EMAC_TI_CLKDIV CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS CONFIG_SYS_ENET_BD_BASE -CONFIG_SYS_ENV_ADDR CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_ETHOC_BASE CONFIG_SYS_ETHOC_BUFFER_ADDR @@ -1612,23 +1104,14 @@ CONFIG_SYS_ETVPE_CLK CONFIG_SYS_EXCEPTION_VECTORS_HIGH CONFIG_SYS_FAST_CLK CONFIG_SYS_FAULT_ECHO_LINK_DOWN -CONFIG_SYS_FAULT_MII_ADDR CONFIG_SYS_FDT_BASE -CONFIG_SYS_FDT_LOAD_ADDR CONFIG_SYS_FDT_PAD -CONFIG_SYS_FEC0_IOBASE -CONFIG_SYS_FEC1_IOBASE CONFIG_SYS_FECI2C CONFIG_SYS_FEC_BUF_USE_SRAM -CONFIG_SYS_FIXED_PHY_ADDR -CONFIG_SYS_FIXED_PHY_PORT -CONFIG_SYS_FIXED_PHY_PORTS CONFIG_SYS_FLASH0 CONFIG_SYS_FLASH1 CONFIG_SYS_FLASH1_BASE_PHYS CONFIG_SYS_FLASH1_BASE_PHYS_EARLY -CONFIG_SYS_FLASHBOOT -CONFIG_SYS_FLASH_AUTOPROTECT_LIST CONFIG_SYS_FLASH_BANKS_LIST CONFIG_SYS_FLASH_BANKS_SIZES CONFIG_SYS_FLASH_BASE @@ -1637,16 +1120,11 @@ CONFIG_SYS_FLASH_BASE1 CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE_PHYS_EARLY CONFIG_SYS_FLASH_BR_PRELIM -CONFIG_SYS_FLASH_CFI_AMD_RESET CONFIG_SYS_FLASH_CFI_NONBLOCK CONFIG_SYS_FLASH_CFI_WIDTH CONFIG_SYS_FLASH_CHECKSUM -CONFIG_SYS_FLASH_CHECK_BLANK_BEFORE_ERASE CONFIG_SYS_FLASH_EMPTY_INFO CONFIG_SYS_FLASH_ERASE_TOUT -CONFIG_SYS_FLASH_LEGACY_256Kx8 -CONFIG_SYS_FLASH_LEGACY_512Kx16 -CONFIG_SYS_FLASH_LEGACY_512Kx8 CONFIG_SYS_FLASH_LOCK_TOUT CONFIG_SYS_FLASH_OR_PRELIM CONFIG_SYS_FLASH_PARMSECT_SZ @@ -1655,12 +1133,10 @@ CONFIG_SYS_FLASH_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH_UNLOCK_TOUT -CONFIG_SYS_FLASH_VERIFY_AFTER_WRITE CONFIG_SYS_FLASH_WRITE_TOUT CONFIG_SYS_FLYCNFG_VAL CONFIG_SYS_FM1_10GEC1_PHY_ADDR CONFIG_SYS_FM1_CLK -CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR CONFIG_SYS_FM1_DTSEC1_PHY_ADDR CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR CONFIG_SYS_FM1_DTSEC2_PHY_ADDR @@ -1670,34 +1146,16 @@ CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR CONFIG_SYS_FM1_DTSEC4_PHY_ADDR CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR CONFIG_SYS_FM1_DTSEC5_PHY_ADDR -CONFIG_SYS_FM1_DTSEC_MDIO_ADDR CONFIG_SYS_FM1_QSGMII11_PHY_ADDR CONFIG_SYS_FM1_QSGMII21_PHY_ADDR -CONFIG_SYS_FM1_TGEC_MDIO_ADDR CONFIG_SYS_FM2_10GEC1_PHY_ADDR CONFIG_SYS_FM2_CLK CONFIG_SYS_FM2_DTSEC1_PHY_ADDR CONFIG_SYS_FM2_DTSEC2_PHY_ADDR CONFIG_SYS_FM2_DTSEC3_PHY_ADDR CONFIG_SYS_FM2_DTSEC4_PHY_ADDR -CONFIG_SYS_FM2_DTSEC_MDIO_ADDR -CONFIG_SYS_FM2_TGEC_MDIO_ADDR CONFIG_SYS_FMAN_V3 CONFIG_SYS_FM_MURAM_SIZE -CONFIG_SYS_FORM_3U_CPCI -CONFIG_SYS_FORM_3U_VPX -CONFIG_SYS_FORM_6U_CPCI -CONFIG_SYS_FORM_6U_VPX -CONFIG_SYS_FORM_AMC -CONFIG_SYS_FORM_ATCA_AMC -CONFIG_SYS_FORM_ATCA_PMC -CONFIG_SYS_FORM_CUSTOM -CONFIG_SYS_FORM_PCI -CONFIG_SYS_FORM_PCI_EXPRESS -CONFIG_SYS_FORM_PMC -CONFIG_SYS_FORM_PMC_XMC -CONFIG_SYS_FORM_VME -CONFIG_SYS_FORM_XMC CONFIG_SYS_FPGAREG_DATE CONFIG_SYS_FPGAREG_DIPSW CONFIG_SYS_FPGAREG_FREQ @@ -1705,10 +1163,6 @@ CONFIG_SYS_FPGAREG_RESET CONFIG_SYS_FPGAREG_RESET_CODE CONFIG_SYS_FPGA_AMASK CONFIG_SYS_FPGA_BASE -CONFIG_SYS_FPGA_CHECK_BUSY -CONFIG_SYS_FPGA_CHECK_CTRLC -CONFIG_SYS_FPGA_CHECK_ERROR -CONFIG_SYS_FPGA_COUNT CONFIG_SYS_FPGA_CSOR CONFIG_SYS_FPGA_CSPR CONFIG_SYS_FPGA_CSPR_EXT @@ -1716,25 +1170,15 @@ CONFIG_SYS_FPGA_FTIM0 CONFIG_SYS_FPGA_FTIM1 CONFIG_SYS_FPGA_FTIM2 CONFIG_SYS_FPGA_FTIM3 -CONFIG_SYS_FPGA_NO_RFL_HI CONFIG_SYS_FPGA_PROG_FEEDBACK -CONFIG_SYS_FPGA_PROG_TIME CONFIG_SYS_FPGA_SIZE CONFIG_SYS_FPGA_WAIT -CONFIG_SYS_FPGA_WAIT_BUSY -CONFIG_SYS_FPGA_WAIT_CONFIG -CONFIG_SYS_FPGA_WAIT_INIT -CONFIG_SYS_FSL_AIOP1_BASE -CONFIG_SYS_FSL_AIOP1_SIZE -CONFIG_SYS_FSL_B4860QDS_XFI_ERR CONFIG_SYS_FSL_BMAN_ADDR CONFIG_SYS_FSL_BMAN_OFFSET -CONFIG_SYS_FSL_CCSR_BASE CONFIG_SYS_FSL_CCSR_GUR_BE CONFIG_SYS_FSL_CCSR_GUR_LE CONFIG_SYS_FSL_CCSR_SCFG_BE CONFIG_SYS_FSL_CCSR_SCFG_LE -CONFIG_SYS_FSL_CCSR_SIZE CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR @@ -1771,28 +1215,19 @@ CONFIG_SYS_FSL_CPC_ADDR CONFIG_SYS_FSL_CPC_OFFSET CONFIG_SYS_FSL_CSU_ADDR CONFIG_SYS_FSL_DCFG_ADDR -CONFIG_SYS_FSL_DCSR_BASE CONFIG_SYS_FSL_DCSR_DDR2_ADDR CONFIG_SYS_FSL_DCSR_DDR3_ADDR CONFIG_SYS_FSL_DCSR_DDR4_ADDR CONFIG_SYS_FSL_DCSR_DDR_ADDR -CONFIG_SYS_FSL_DCSR_SIZE CONFIG_SYS_FSL_DCU_BE CONFIG_SYS_FSL_DCU_LE CONFIG_SYS_FSL_DDR2_ADDR -CONFIG_SYS_FSL_DDR3L CONFIG_SYS_FSL_DDR3_ADDR CONFIG_SYS_FSL_DDR_ADDR CONFIG_SYS_FSL_DDR_EMU CONFIG_SYS_FSL_DDR_INTLV_256B CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY -CONFIG_SYS_FSL_DRAM_BASE1 -CONFIG_SYS_FSL_DRAM_BASE2 -CONFIG_SYS_FSL_DRAM_BASE3 -CONFIG_SYS_FSL_DRAM_SIZE1 -CONFIG_SYS_FSL_DRAM_SIZE2 -CONFIG_SYS_FSL_DRAM_SIZE3 CONFIG_SYS_FSL_DSPI_BE CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR @@ -1801,7 +1236,6 @@ CONFIG_SYS_FSL_DSP_DDR_ADDR CONFIG_SYS_FSL_DSP_M2_RAM_ADDR CONFIG_SYS_FSL_DSP_M3_RAM_ADDR CONFIG_SYS_FSL_ERRATUM_A008751 -CONFIG_SYS_FSL_ERRATUM_A_004934 CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_FSL_ESDHC_BE CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT @@ -1809,7 +1243,6 @@ CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE CONFIG_SYS_FSL_ESDHC_LE CONFIG_SYS_FSL_ESDHC_NUM CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK -CONFIG_SYS_FSL_ESDHC_USE_PIO CONFIG_SYS_FSL_FM CONFIG_SYS_FSL_FM1_ADDR CONFIG_SYS_FSL_FM1_DTSEC1_ADDR @@ -1835,28 +1268,14 @@ CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET CONFIG_SYS_FSL_FM2_RX5_1G_OFFSET CONFIG_SYS_FSL_FMAN_ADDR CONFIG_SYS_FSL_GUTS_ADDR -CONFIG_SYS_FSL_I2C -CONFIG_SYS_FSL_IFC_BASE -CONFIG_SYS_FSL_IFC_BASE1 -CONFIG_SYS_FSL_IFC_BASE2 CONFIG_SYS_FSL_IFC_BE CONFIG_SYS_FSL_IFC_LE -CONFIG_SYS_FSL_IFC_SIZE -CONFIG_SYS_FSL_IFC_SIZE1 -CONFIG_SYS_FSL_IFC_SIZE1_1 -CONFIG_SYS_FSL_IFC_SIZE2 CONFIG_SYS_FSL_ISBC_VER CONFIG_SYS_FSL_JR0_ADDR CONFIG_SYS_FSL_JR0_OFFSET CONFIG_SYS_FSL_LS1_CLK_ADDR CONFIG_SYS_FSL_LSCH3_SERDES_ADDR CONFIG_SYS_FSL_MAX_NUM_OF_SEC -CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR -CONFIG_SYS_FSL_MC_BASE -CONFIG_SYS_FSL_MC_SIZE -CONFIG_SYS_FSL_NI_BASE -CONFIG_SYS_FSL_NI_SIZE -CONFIG_SYS_FSL_NO_SERDES CONFIG_SYS_FSL_NUM_CC_PLL CONFIG_SYS_FSL_NUM_CC_PLLS CONFIG_SYS_FSL_OCRAM_BASE @@ -1865,26 +1284,16 @@ CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS CONFIG_SYS_FSL_PAMU_OFFSET CONFIG_SYS_FSL_PCIE_COMPAT CONFIG_SYS_FSL_PCI_VER_3_X -CONFIG_SYS_FSL_PEBUF_BASE -CONFIG_SYS_FSL_PEBUF_SIZE CONFIG_SYS_FSL_PEX_LUT_BE CONFIG_SYS_FSL_PEX_LUT_LE CONFIG_SYS_FSL_PMIC_I2C_ADDR CONFIG_SYS_FSL_PMU_ADDR CONFIG_SYS_FSL_PMU_CLTBENR -CONFIG_SYS_FSL_QBMAN_BASE -CONFIG_SYS_FSL_QBMAN_SIZE -CONFIG_SYS_FSL_QBMAN_SIZE_1 CONFIG_SYS_FSL_QMAN_ADDR CONFIG_SYS_FSL_QMAN_OFFSET CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_QSPI_BASE -CONFIG_SYS_FSL_QSPI_BASE1 -CONFIG_SYS_FSL_QSPI_BASE2 CONFIG_SYS_FSL_QSPI_LE -CONFIG_SYS_FSL_QSPI_SIZE -CONFIG_SYS_FSL_QSPI_SIZE1 -CONFIG_SYS_FSL_QSPI_SIZE2 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RAID_ENGINE_ADDR CONFIG_SYS_FSL_RAID_ENGINE_OFFSET @@ -1923,49 +1332,15 @@ CONFIG_SYS_FSL_SRIO_OFFSET CONFIG_SYS_FSL_SRK_LE CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_TIMER_ADDR -CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_FSL_USB1_PHY_ENABLE -CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_FSL_USB2_PHY_ENABLE -CONFIG_SYS_FSL_USB_CTRL_PHY_EN -CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE -CONFIG_SYS_FSL_USB_HS_DISCNCT_INC -CONFIG_SYS_FSL_USB_INTERNAL_SOC_CLK_EN CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -CONFIG_SYS_FSL_USB_PLLPRG1_PHY_DIV -CONFIG_SYS_FSL_USB_PLLPRG2_FRAC_LPF_EN -CONFIG_SYS_FSL_USB_PLLPRG2_MFI -CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK -CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN -CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN -CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN -CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV -CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK -CONFIG_SYS_FSL_USB_PWRFLT_CR_EN -CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL -CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK -CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0 -CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3 -CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0 -CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3 -CONFIG_SYS_FSL_USB_SYS_CLK_VALID -CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN -CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK CONFIG_SYS_FSL_USDHC_NUM CONFIG_SYS_FSL_WDOG_BE CONFIG_SYS_FSL_WRIOP1_ADDR -CONFIG_SYS_FSL_WRIOP1_BASE CONFIG_SYS_FSL_WRIOP1_MDIO1 CONFIG_SYS_FSL_WRIOP1_MDIO2 -CONFIG_SYS_FSL_WRIOP1_SIZE -CONFIG_SYS_FSL_XHCI_USB1_ADDR -CONFIG_SYS_FSL_XHCI_USB2_ADDR -CONFIG_SYS_FSL_XHCI_USB3_ADDR -CONFIG_SYS_FSMC_BASE -CONFIG_SYS_FSMC_NAND_16BIT -CONFIG_SYS_FSMC_NAND_8BIT CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS @@ -2002,16 +1377,10 @@ CONFIG_SYS_GPDR0_VAL CONFIG_SYS_GPDR1_VAL CONFIG_SYS_GPDR2_VAL CONFIG_SYS_GPDR3_VAL -CONFIG_SYS_GPIO1_DAT -CONFIG_SYS_GPIO1_DIR CONFIG_SYS_GPIO1_EN CONFIG_SYS_GPIO1_FUNC CONFIG_SYS_GPIO1_LED CONFIG_SYS_GPIO1_OUT -CONFIG_SYS_GPIO1_PRELIM -CONFIG_SYS_GPIO2_DAT -CONFIG_SYS_GPIO2_DIR -CONFIG_SYS_GPIO2_PRELIM CONFIG_SYS_GPIO_EN CONFIG_SYS_GPIO_FUNC CONFIG_SYS_GPIO_OUT @@ -2021,29 +1390,9 @@ CONFIG_SYS_GPSR1_VAL CONFIG_SYS_GPSR2_VAL CONFIG_SYS_GPSR3_VAL CONFIG_SYS_HALT_BEFOR_RAM_JUMP -CONFIG_SYS_HELP_CMD_WIDTH -CONFIG_SYS_HIGH CONFIG_SYS_HMI_BASE -CONFIG_SYS_HRCW_HIGH -CONFIG_SYS_HRCW_LOW CONFIG_SYS_HZ_CLOCK -CONFIG_SYS_I2C2_FSL_OFFSET -CONFIG_SYS_I2C2_OFFSET -CONFIG_SYS_I2C2_PINMUX_CLR -CONFIG_SYS_I2C2_PINMUX_REG -CONFIG_SYS_I2C2_PINMUX_SET -CONFIG_SYS_I2C_0 -CONFIG_SYS_I2C_2 -CONFIG_SYS_I2C_5 -CONFIG_SYS_I2C_BASE0 -CONFIG_SYS_I2C_BASE1 -CONFIG_SYS_I2C_BASE2 -CONFIG_SYS_I2C_BASE3 -CONFIG_SYS_I2C_BASE4 -CONFIG_SYS_I2C_BASE5 CONFIG_SYS_I2C_BUSES -CONFIG_SYS_I2C_CLK_OFFSET -CONFIG_SYS_I2C_DIRECT_BUS CONFIG_SYS_I2C_DVI_ADDR CONFIG_SYS_I2C_DVI_BUS_NUM CONFIG_SYS_I2C_EEPROM_CCID @@ -2052,13 +1401,10 @@ CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS CONFIG_SYS_I2C_EXPANDER_ADDR CONFIG_SYS_I2C_FPGA_ADDR -CONFIG_SYS_I2C_FRAM CONFIG_SYS_I2C_G762_ADDR CONFIG_SYS_I2C_IFDR_DIV CONFIG_SYS_I2C_INIT_BOARD CONFIG_SYS_I2C_LDI_ADDR -CONFIG_SYS_I2C_LPC32XX_SLAVE -CONFIG_SYS_I2C_LPC32XX_SPEED CONFIG_SYS_I2C_MAX_HOPS CONFIG_SYS_I2C_NOPROBES CONFIG_SYS_I2C_PCA953X_ADDR @@ -2072,24 +1418,7 @@ CONFIG_SYS_I2C_QIXIS_ADDR CONFIG_SYS_I2C_RTC_ADDR CONFIG_SYS_I2C_TCA642X_ADDR CONFIG_SYS_I2C_TCA642X_BUS_NUM -CONFIG_SYS_IBAT0L -CONFIG_SYS_IBAT0U -CONFIG_SYS_IBAT1L -CONFIG_SYS_IBAT1U -CONFIG_SYS_IBAT2L -CONFIG_SYS_IBAT2U -CONFIG_SYS_IBAT3L -CONFIG_SYS_IBAT3U -CONFIG_SYS_IBAT4L -CONFIG_SYS_IBAT4U -CONFIG_SYS_IBAT5L -CONFIG_SYS_IBAT5U -CONFIG_SYS_IBAT6L -CONFIG_SYS_IBAT6U -CONFIG_SYS_IBAT7L -CONFIG_SYS_IBAT7U CONFIG_SYS_ICACHE_INV -CONFIG_SYS_ICS8N3QV01_I2C CONFIG_SYS_IDE_MAXBUS CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_IFC_ADDR @@ -2114,21 +1443,16 @@ CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_INPUT_CLKSRC CONFIG_SYS_INTERLAKEN -CONFIG_SYS_INTR_BASE CONFIG_SYS_INT_FLASH_BASE CONFIG_SYS_INT_FLASH_ENABLE CONFIG_SYS_IO_BASE -CONFIG_SYS_ISA_BASE CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS -CONFIG_SYS_ISA_MEM CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_JFFS2_FIRST_SECTOR CONFIG_SYS_JFFS2_NUM_BANKS -CONFIG_SYS_JFFS2_SORT_FRAGMENTS CONFIG_SYS_KMBEC_FPGA_BASE CONFIG_SYS_KMBEC_FPGA_SIZE -CONFIG_SYS_KWD_CONFIG CONFIG_SYS_L2_PL310 CONFIG_SYS_L2_SIZE CONFIG_SYS_L3_SIZE @@ -2152,27 +1476,20 @@ CONFIG_SYS_LBC_SDRAM_SIZE CONFIG_SYS_LDB_CLOCK CONFIG_SYS_LIME_BASE CONFIG_SYS_LIME_SIZE -CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE CONFIG_SYS_LOADS_BAUD_CHANGE CONFIG_SYS_LOW CONFIG_SYS_LOWMEM_BASE -CONFIG_SYS_LOW_RES_TIMER CONFIG_SYS_LPAE_SDRAM_BASE CONFIG_SYS_LS1_DDR_BLOCK1_SIZE CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS -CONFIG_SYS_LS_MC_DPC_IN_DDR CONFIG_SYS_LS_MC_DPC_MAX_LENGTH -CONFIG_SYS_LS_MC_DPL_IN_DDR CONFIG_SYS_LS_MC_DPL_MAX_LENGTH CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET -CONFIG_SYS_LS_MC_FW_IN_DDR -CONFIG_SYS_LS_PPA_FW_IN_xxx CONFIG_SYS_M41T11_BASE_YEAR -CONFIG_SYS_M41T11_EXT_CENTURY_DATA CONFIG_SYS_MAIN_PWR_ON CONFIG_SYS_MALLOC_SIMPLE CONFIG_SYS_MAMR @@ -2181,7 +1498,6 @@ CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_MASTER_CLOCK CONFIG_SYS_MATRIX_EBI0CSA_VAL CONFIG_SYS_MATRIX_EBICSA_VAL -CONFIG_SYS_MATRIX_MCFG_REMAP CONFIG_SYS_MAXARGS CONFIG_SYS_MAX_FLASH_BANKS CONFIG_SYS_MAX_FLASH_BANKS_DETECT @@ -2189,39 +1505,32 @@ CONFIG_SYS_MAX_FLASH_SECT CONFIG_SYS_MAX_I2C_BUS CONFIG_SYS_MAX_NAND_CHIPS CONFIG_SYS_MAX_NAND_DEVICE -CONFIG_SYS_MAX_PCI_EPS CONFIG_SYS_MBAR CONFIG_SYS_MBAR2 CONFIG_SYS_MCATT0_VAL CONFIG_SYS_MCATT1_VAL CONFIG_SYS_MCFRRTC_BASE -CONFIG_SYS_MCFRTC_BASE -CONFIG_SYS_MCF_SYNCR CONFIG_SYS_MCIO0_VAL CONFIG_SYS_MCIO1_VAL CONFIG_SYS_MCKR CONFIG_SYS_MCKR1_VAL CONFIG_SYS_MCKR2_VAL CONFIG_SYS_MCKR_CSS -CONFIG_SYS_MCKR_VAL CONFIG_SYS_MCMEM0_VAL CONFIG_SYS_MCMEM1_VAL CONFIG_SYS_MDCNFG_VAL CONFIG_SYS_MDIO1_OFFSET -CONFIG_SYS_MDIO_BASE_ADDR CONFIG_SYS_MDMRS_VAL CONFIG_SYS_MDREFR_VAL CONFIG_SYS_MECR_VAL CONFIG_SYS_MEMAC_LITTLE_ENDIAN CONFIG_SYS_MEMORY_BASE CONFIG_SYS_MEMORY_SIZE -CONFIG_SYS_MEM_MAP CONFIG_SYS_MEM_RESERVE_SECURE CONFIG_SYS_MEM_SIZE CONFIG_SYS_MEM_TOP_HIDE CONFIG_SYS_MFD CONFIG_SYS_MHZ -CONFIG_SYS_MII_MODE CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS @@ -2244,8 +1553,6 @@ CONFIG_SYS_MPC83xx_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_OFFSET CONFIG_SYS_MPC83xx_USB1_ADDR CONFIG_SYS_MPC83xx_USB1_OFFSET -CONFIG_SYS_MPC83xx_USB2_ADDR -CONFIG_SYS_MPC83xx_USB2_OFFSET CONFIG_SYS_MPC85XX_NO_RESETVEC CONFIG_SYS_MPC85xx_CPM_ADDR CONFIG_SYS_MPC85xx_CPM_OFFSET @@ -2306,42 +1613,24 @@ CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET CONFIG_SYS_MPC8xxx_DDR2_OFFSET CONFIG_SYS_MPC8xxx_DDR3_OFFSET CONFIG_SYS_MPC8xxx_DDR_OFFSET -CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC8xxx_PIC_ADDR -CONFIG_SYS_MPC92469AC CONFIG_SYS_MRAM_BASE CONFIG_SYS_MRAM_SIZE CONFIG_SYS_MSC0_VAL CONFIG_SYS_MSC1_VAL CONFIG_SYS_MSC2_VAL -CONFIG_SYS_MX5_CLK32 -CONFIG_SYS_MX5_HCLK -CONFIG_SYS_MX6_CLK32 -CONFIG_SYS_MX6_HCLK -CONFIG_SYS_MX7_CLK32 -CONFIG_SYS_MX7_HCLK -CONFIG_SYS_MXS_VDD5V_ONLY CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -CONFIG_SYS_NAND_ACTL_ALE -CONFIG_SYS_NAND_ACTL_CLE -CONFIG_SYS_NAND_ACTL_DELAY -CONFIG_SYS_NAND_ACTL_NCE -CONFIG_SYS_NAND_ALE CONFIG_SYS_NAND_AMASK CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND_BASE2 CONFIG_SYS_NAND_BASE_LIST CONFIG_SYS_NAND_BASE_PHYS -CONFIG_SYS_NAND_BOOT CONFIG_SYS_NAND_BR_PRELIM -CONFIG_SYS_NAND_BUSWIDTH_16 -CONFIG_SYS_NAND_CLE CONFIG_SYS_NAND_CS CONFIG_SYS_NAND_CSOR CONFIG_SYS_NAND_CSPR CONFIG_SYS_NAND_CSPR_EXT CONFIG_SYS_NAND_DATA_BASE -CONFIG_SYS_NAND_DBW_16 CONFIG_SYS_NAND_DBW_8 CONFIG_SYS_NAND_DDR_LAW CONFIG_SYS_NAND_ECCBYTES @@ -2359,8 +1648,6 @@ CONFIG_SYS_NAND_FTIM3 CONFIG_SYS_NAND_HW_ECC CONFIG_SYS_NAND_HW_ECC_OOBFIRST CONFIG_SYS_NAND_LARGEPAGE -CONFIG_SYS_NAND_LBLAWAR_PRELIM -CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_NAND_MASK_ALE CONFIG_SYS_NAND_MASK_CLE CONFIG_SYS_NAND_MAX_ECCPOS @@ -2370,10 +1657,8 @@ CONFIG_SYS_NAND_NO_SUBPAGE_WRITE CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_NAND_PAGE_2K CONFIG_SYS_NAND_PAGE_4K -CONFIG_SYS_NAND_QUIET CONFIG_SYS_NAND_READY_PIN CONFIG_SYS_NAND_REGS_BASE -CONFIG_SYS_NAND_SELECT_DEVICE CONFIG_SYS_NAND_SIZE CONFIG_SYS_NAND_SPL_KERNEL_OFFS CONFIG_SYS_NAND_U_BOOT_DST @@ -2397,14 +1682,12 @@ CONFIG_SYS_NOR_FTIM1 CONFIG_SYS_NOR_FTIM2 CONFIG_SYS_NOR_FTIM3 CONFIG_SYS_NS16550_CLK -CONFIG_SYS_NS16550_CLK_DIV CONFIG_SYS_NS16550_COM1 CONFIG_SYS_NS16550_COM2 CONFIG_SYS_NS16550_COM3 CONFIG_SYS_NS16550_COM4 CONFIG_SYS_NS16550_COM5 CONFIG_SYS_NS16550_COM6 -CONFIG_SYS_NS16550_IER CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE @@ -2416,22 +1699,15 @@ CONFIG_SYS_NUM_FM2_10GEC CONFIG_SYS_NUM_FM2_DTSEC CONFIG_SYS_NUM_FMAN CONFIG_SYS_NUM_I2C_BUSES -CONFIG_SYS_NUM_IRQS -CONFIG_SYS_NVRAM_ACCESS_ROUTINE CONFIG_SYS_NVRAM_BASE_ADDR CONFIG_SYS_NVRAM_SIZE CONFIG_SYS_OBIR -CONFIG_SYS_OHCI_BE_CONTROLLER CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_OMAP_ABE_SYSCK CONFIG_SYS_ONENAND_BASE CONFIG_SYS_ONENAND_BLOCK_SIZE -CONFIG_SYS_ONENAND_PAGE_SIZE -CONFIG_SYS_OR0_REMAP -CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR_TIMING_MRAM CONFIG_SYS_OSCIN_FREQ -CONFIG_SYS_OSD_DH CONFIG_SYS_OSPR_OFFSET CONFIG_SYS_PACNT CONFIG_SYS_PADAT @@ -2447,7 +1723,6 @@ CONFIG_SYS_PBDDR CONFIG_SYS_PBI_FLASH_BASE CONFIG_SYS_PBI_FLASH_WINDOW CONFIG_SYS_PBSIZE -CONFIG_SYS_PCA953X_NVM_WP CONFIG_SYS_PCCNT CONFIG_SYS_PCDAT CONFIG_SYS_PCDDR @@ -2464,7 +1739,6 @@ CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_SIZE CONFIG_SYS_PCI1_MEM_VIRT CONFIG_SYS_PCI2_ADDR -CONFIG_SYS_PCI64_MEMORY_BUS CONFIG_SYS_PCIE CONFIG_SYS_PCIE1_ADDR CONFIG_SYS_PCIE1_BASE @@ -2478,10 +1752,8 @@ CONFIG_SYS_PCIE1_MEM_BASE CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_SIZE CONFIG_SYS_PCIE1_MEM_VIRT -CONFIG_SYS_PCIE1_NAME CONFIG_SYS_PCIE1_PHYS_ADDR CONFIG_SYS_PCIE1_PHYS_BASE -CONFIG_SYS_PCIE1_PHYS_SIZE CONFIG_SYS_PCIE1_VIRT_ADDR CONFIG_SYS_PCIE2_ADDR CONFIG_SYS_PCIE2_BASE @@ -2495,17 +1767,14 @@ CONFIG_SYS_PCIE2_MEM_BASE CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_SIZE CONFIG_SYS_PCIE2_MEM_VIRT -CONFIG_SYS_PCIE2_NAME CONFIG_SYS_PCIE2_PHYS_ADDR CONFIG_SYS_PCIE2_PHYS_BASE -CONFIG_SYS_PCIE2_PHYS_SIZE CONFIG_SYS_PCIE2_VIRT_ADDR CONFIG_SYS_PCIE3_ADDR CONFIG_SYS_PCIE3_IO_PHYS CONFIG_SYS_PCIE3_IO_VIRT CONFIG_SYS_PCIE3_MEM_PHYS CONFIG_SYS_PCIE3_MEM_VIRT -CONFIG_SYS_PCIE3_NAME CONFIG_SYS_PCIE3_PHYS_ADDR CONFIG_SYS_PCIE3_PHYS_SIZE CONFIG_SYS_PCIE4_ADDR @@ -2514,68 +1783,33 @@ CONFIG_SYS_PCIE4_IO_VIRT CONFIG_SYS_PCIE4_MEM_BUS CONFIG_SYS_PCIE4_MEM_PHYS CONFIG_SYS_PCIE4_MEM_VIRT -CONFIG_SYS_PCIE4_NAME CONFIG_SYS_PCIE4_PHYS_ADDR -CONFIG_SYS_PCIE4_PHYS_SIZE CONFIG_SYS_PCIE_MMAP_SIZE -CONFIG_SYS_PCI_BAR0 -CONFIG_SYS_PCI_BAR1 -CONFIG_SYS_PCI_BAR2 -CONFIG_SYS_PCI_BAR3 -CONFIG_SYS_PCI_BAR4 -CONFIG_SYS_PCI_BAR5 -CONFIG_SYS_PCI_CACHE_LINE_SIZE -CONFIG_SYS_PCI_CFG_PHYS -CONFIG_SYS_PCI_EP_MEMORY_BASE CONFIG_SYS_PCI_IO_BASE -CONFIG_SYS_PCI_IO_BUS CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_SIZE CONFIG_SYS_PCI_MAP_END CONFIG_SYS_PCI_MAP_START -CONFIG_SYS_PCI_MEMORY_BUS -CONFIG_SYS_PCI_MEMORY_PHYS -CONFIG_SYS_PCI_MEMORY_SIZE CONFIG_SYS_PCI_MEM_BASE -CONFIG_SYS_PCI_MEM_BUS CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_SIZE CONFIG_SYS_PCI_MMIO_BASE CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_SIZE -CONFIG_SYS_PCI_NR_INBOUND_WIN CONFIG_SYS_PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_SIZE -CONFIG_SYS_PCI_SYS_MEM_BUS -CONFIG_SYS_PCI_SYS_MEM_PHYS -CONFIG_SYS_PCI_SYS_MEM_SIZE -CONFIG_SYS_PCI_TBATR0 -CONFIG_SYS_PCI_TBATR1 -CONFIG_SYS_PCI_TBATR2 -CONFIG_SYS_PCI_TBATR3 -CONFIG_SYS_PCI_TBATR4 -CONFIG_SYS_PCI_TBATR5 CONFIG_SYS_PDCNT CONFIG_SYS_PEHLPAR -CONFIG_SYS_PEPAR -CONFIG_SYS_PFPAR -CONFIG_SYS_PHY_UBOOT_BASE -CONFIG_SYS_PIOC_ASR_VAL -CONFIG_SYS_PIOC_BSR_VAL CONFIG_SYS_PIOC_PDR_VAL CONFIG_SYS_PIOC_PDR_VAL1 CONFIG_SYS_PIOC_PPUDR_VAL CONFIG_SYS_PIOD_PDR_VAL1 CONFIG_SYS_PIOD_PPUDR_VAL CONFIG_SYS_PIO_MODE -CONFIG_SYS_PIXIS_VBOOT_ENABLE -CONFIG_SYS_PIXIS_VBOOT_MASK -CONFIG_SYS_PIXIS_VCFGEN0_ENABLE CONFIG_SYS_PJPAR CONFIG_SYS_PL310_BASE CONFIG_SYS_PLLAR_VAL -CONFIG_SYS_PLLBR_VAL CONFIG_SYS_PLLCR CONFIG_SYS_PLL_BYPASS CONFIG_SYS_PLL_FDR @@ -2585,44 +1819,9 @@ CONFIG_SYS_PMAN CONFIG_SYS_PMC_BASE CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PME_CLK -CONFIG_SYS_PORTTC -CONFIG_SYS_POST_BSPEC1 -CONFIG_SYS_POST_BSPEC2 -CONFIG_SYS_POST_BSPEC3 -CONFIG_SYS_POST_BSPEC4 -CONFIG_SYS_POST_BSPEC5 -CONFIG_SYS_POST_CACHE -CONFIG_SYS_POST_CODEC -CONFIG_SYS_POST_COPROC -CONFIG_SYS_POST_CPU -CONFIG_SYS_POST_DSP -CONFIG_SYS_POST_ECC -CONFIG_SYS_POST_ETHER -CONFIG_SYS_POST_FLASH -CONFIG_SYS_POST_FLASH_END -CONFIG_SYS_POST_FLASH_NUM -CONFIG_SYS_POST_FLASH_START -CONFIG_SYS_POST_FPU -CONFIG_SYS_POST_HOTKEYS_GPIO -CONFIG_SYS_POST_I2C -CONFIG_SYS_POST_I2C_ADDRS -CONFIG_SYS_POST_I2C_IGNORES CONFIG_SYS_POST_MEMORY CONFIG_SYS_POST_MEM_REGIONS -CONFIG_SYS_POST_OCM -CONFIG_SYS_POST_RTC -CONFIG_SYS_POST_SPR -CONFIG_SYS_POST_SYSMON -CONFIG_SYS_POST_UART -CONFIG_SYS_POST_USB -CONFIG_SYS_POST_WATCHDOG -CONFIG_SYS_POST_WORD_ADDR -CONFIG_SYS_PPC_DDR_WIMGE -CONFIG_SYS_PQSPAR -CONFIG_SYS_PSDPAR CONFIG_SYS_PSSR_VAL -CONFIG_SYS_PTCPAR -CONFIG_SYS_PTDPAR CONFIG_SYS_PTV CONFIG_SYS_PUAPAR CONFIG_SYS_QMAN_CENA_BASE @@ -2643,10 +1842,8 @@ CONFIG_SYS_RCAR_I2C0_BASE CONFIG_SYS_RCAR_I2C1_BASE CONFIG_SYS_RCAR_I2C2_BASE CONFIG_SYS_RCAR_I2C3_BASE -CONFIG_SYS_READ_SPD CONFIG_SYS_RESET_ADDR CONFIG_SYS_RESET_ADDRESS -CONFIG_SYS_RESET_SCTRL CONFIG_SYS_RFD CONFIG_SYS_RGMII1_PHY_ADDR CONFIG_SYS_RGMII2_PHY_ADDR @@ -2658,8 +1855,6 @@ CONFIG_SYS_ROM_BASE CONFIG_SYS_RSTC_RMR_VAL CONFIG_SYS_RTC_BUS_NUM CONFIG_SYS_RTC_CNT -CONFIG_SYS_RTC_OSCILLATOR -CONFIG_SYS_RTC_REG_BASE_ADDR CONFIG_SYS_RTC_SETUP CONFIG_SYS_RX_ETH_BUFFER CONFIG_SYS_SATA @@ -2669,45 +1864,22 @@ CONFIG_SYS_SATA1_OFFSET CONFIG_SYS_SATA2 CONFIG_SYS_SATA2_FLAGS CONFIG_SYS_SATA2_OFFSET -CONFIG_SYS_SATA_ENV_DEV CONFIG_SYS_SATA_FAT_BOOT_PARTITION CONFIG_SYS_SATA_MAX_DEVICE CONFIG_SYS_SBFHDR_DATA_OFFSET CONFIG_SYS_SBFHDR_SIZE -CONFIG_SYS_SCCR_ENCCM -CONFIG_SYS_SCCR_PCICM -CONFIG_SYS_SCCR_PCIEXP1CM -CONFIG_SYS_SCCR_PCIEXP2CM CONFIG_SYS_SCCR_SATACM CONFIG_SYS_SCCR_TSEC1CM -CONFIG_SYS_SCCR_TSEC1ON CONFIG_SYS_SCCR_TSEC2CM -CONFIG_SYS_SCCR_TSEC2ON -CONFIG_SYS_SCCR_TSECCM CONFIG_SYS_SCCR_USBDRCM -CONFIG_SYS_SCCR_USBMPHCM CONFIG_SYS_SCR CONFIG_SYS_SCSI_MAX_DEVICE CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SCSI_MAX_SCSI_ID -CONFIG_SYS_SDIO0 -CONFIG_SYS_SDIO0_MAX_CLK -CONFIG_SYS_SDIO1 -CONFIG_SYS_SDIO1_MAX_CLK -CONFIG_SYS_SDIO2 -CONFIG_SYS_SDIO2_MAX_CLK -CONFIG_SYS_SDIO3 -CONFIG_SYS_SDIO3_MAX_CLK -CONFIG_SYS_SDIO_BASE0 -CONFIG_SYS_SDIO_BASE1 -CONFIG_SYS_SDIO_BASE2 -CONFIG_SYS_SDIO_BASE3 CONFIG_SYS_SDRAM -CONFIG_SYS_SDRAM1 CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0 CONFIG_SYS_SDRAM_BASE1 -CONFIG_SYS_SDRAM_BASE1xx CONFIG_SYS_SDRAM_BASE2 CONFIG_SYS_SDRAM_CFG CONFIG_SYS_SDRAM_CFG1 @@ -2717,7 +1889,6 @@ CONFIG_SYS_SDRAM_EMOD CONFIG_SYS_SDRAM_MODE CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0 -CONFIG_SYS_SDRAM_SIZE1 CONFIG_SYS_SDRAM_SIZE_LAW CONFIG_SYS_SDRAM_VAL CONFIG_SYS_SDRAM_VAL1 @@ -2766,13 +1937,10 @@ CONFIG_SYS_SH_SDHI3_BASE CONFIG_SYS_SH_SDHI_NR_CHANNEL CONFIG_SYS_SICRH CONFIG_SYS_SICRL -CONFIG_SYS_SIL1178_I2C CONFIG_SYS_SMC0_CYCLE0_VAL CONFIG_SYS_SMC0_MODE0_VAL CONFIG_SYS_SMC0_PULSE0_VAL CONFIG_SYS_SMC0_SETUP0_VAL -CONFIG_SYS_SMC_CSR0_VAL -CONFIG_SYS_SPCR_OPT CONFIG_SYS_SPD_BUS_NUM CONFIG_SYS_SPI_ARGS_OFFS CONFIG_SYS_SPI_ARGS_SIZE @@ -2783,8 +1951,6 @@ CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE CONFIG_SYS_SPI_FLASH_U_BOOT_START CONFIG_SYS_SPI_KERNEL_OFFS -CONFIG_SYS_SPI_MXC_WAIT -CONFIG_SYS_SPI_RTC_DEVID CONFIG_SYS_SPI_ST_ENABLE_WP_PIN CONFIG_SYS_SPI_U_BOOT_SIZE CONFIG_SYS_SPL_ARGS_ADDR @@ -2806,8 +1972,6 @@ CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS CONFIG_SYS_SST_SECT CONFIG_SYS_SST_SECTSZ CONFIG_SYS_STACK_SIZE -CONFIG_SYS_STATUS_C -CONFIG_SYS_STATUS_OK CONFIG_SYS_SXCNFG_VAL CONFIG_SYS_TBIPA_VALUE CONFIG_SYS_TCLK @@ -2815,30 +1979,17 @@ CONFIG_SYS_TIMERBASE CONFIG_SYS_TIMER_BASE CONFIG_SYS_TIMER_COUNTER CONFIG_SYS_TIMER_COUNTS_DOWN -CONFIG_SYS_TIMER_PRESCALER CONFIG_SYS_TIMER_RATE CONFIG_SYS_TMPVIRT -CONFIG_SYS_TMRINTR_MASK -CONFIG_SYS_TMRINTR_NO -CONFIG_SYS_TMRINTR_PEND -CONFIG_SYS_TMRINTR_PRI -CONFIG_SYS_TMRPND_REG -CONFIG_SYS_TMR_BASE CONFIG_SYS_TSEC1_OFFSET CONFIG_SYS_TSEC2_OFFSET CONFIG_SYS_TSEC3_OFFSET CONFIG_SYS_TX_ETH_BUFFER -CONFIG_SYS_UART1_ALT1_GPIO -CONFIG_SYS_UART2_ALT1_GPIO CONFIG_SYS_UART2_ALT3_GPIO -CONFIG_SYS_UART2_PRI_GPIO -CONFIG_SYS_UART_BASE CONFIG_SYS_UART_PORT CONFIG_SYS_UBOOT_BASE CONFIG_SYS_UBOOT_START -CONFIG_SYS_UDELAY_BASE CONFIG_SYS_UEC -CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_UEC2_ETH_TYPE CONFIG_SYS_UEC2_INTERFACE_SPEED CONFIG_SYS_UEC2_INTERFACE_TYPE @@ -2846,13 +1997,8 @@ CONFIG_SYS_UEC2_PHY_ADDR CONFIG_SYS_UEC2_RX_CLK CONFIG_SYS_UEC2_TX_CLK CONFIG_SYS_UEC2_UCC_NUM -CONFIG_SYS_UEC3_PHY_ADDR -CONFIG_SYS_UEC4_PHY_ADDR -CONFIG_SYS_UECx_PHY_ADDR CONFIG_SYS_ULB_CLK CONFIG_SYS_UNIFY_CACHE -CONFIG_SYS_UNSPEC_PHYID -CONFIG_SYS_UNSPEC_STRID CONFIG_SYS_USB_FAT_BOOT_PARTITION CONFIG_SYS_USB_OHCI_BOARD_INIT CONFIG_SYS_USB_OHCI_CPU_INIT @@ -2865,7 +2011,6 @@ CONFIG_SYS_USE_DATAFLASH_CS0 CONFIG_SYS_USE_DATAFLASH_CS1 CONFIG_SYS_USE_DATAFLASH_CS3 CONFIG_SYS_USE_FLASH -CONFIG_SYS_USE_MAIN_OSCILLATOR CONFIG_SYS_USE_MMC CONFIG_SYS_USE_NAND CONFIG_SYS_USE_NANDFLASH @@ -2874,7 +2019,6 @@ CONFIG_SYS_USR_EXCEP CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT -CONFIG_SYS_VCXK_AUTODETECT CONFIG_SYS_VCXK_BASE CONFIG_SYS_VCXK_DEFAULT_LINEALIGN CONFIG_SYS_VCXK_DOUBLEBUFFERED @@ -2887,34 +2031,24 @@ CONFIG_SYS_VCXK_INVERT_PORT CONFIG_SYS_VCXK_REQUEST_DDR CONFIG_SYS_VCXK_REQUEST_PIN CONFIG_SYS_VCXK_REQUEST_PORT -CONFIG_SYS_VCXK_RESET_DDR -CONFIG_SYS_VCXK_RESET_PIN -CONFIG_SYS_VCXK_RESET_PORT CONFIG_SYS_VIDEO_LOGO_MAX_SIZE CONFIG_SYS_VSC7385_BASE CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BR_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM -CONFIG_SYS_WATCHDOG_FREQ CONFIG_SYS_WATCHDOG_VALUE CONFIG_SYS_WDTC_WDMR_VAL CONFIG_SYS_WRITE_SWAPPED_DATA CONFIG_SYS_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB3_ADDR -CONFIG_SYS_XIMG_LEN -CONFIG_TAM3517_SETTINGS CONFIG_TCA642X CONFIG_TEGRA_BOARD_STRING CONFIG_TEGRA_CLOCK_SCALING CONFIG_TEGRA_ENABLE_UARTA -CONFIG_TEGRA_ENABLE_UARTB -CONFIG_TEGRA_ENABLE_UARTC CONFIG_TEGRA_ENABLE_UARTD -CONFIG_TEGRA_ENABLE_UARTE CONFIG_TEGRA_GPU CONFIG_TEGRA_LP0 -CONFIG_TEGRA_NAND CONFIG_TEGRA_PMU CONFIG_TEGRA_SLINK_CTRLS CONFIG_TEGRA_SPI @@ -2924,8 +2058,6 @@ CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 CONFIG_TESTPIN_MASK CONFIG_TESTPIN_REG -CONFIG_TEST_LIST_SORT -CONFIG_TFTP_FILE_NAME_MAX_LEN CONFIG_TFTP_PORT CONFIG_THOR_RESET_OFF CONFIG_THUNDERX @@ -2949,7 +2081,6 @@ CONFIG_TSECV2 CONFIG_TSECV2_1 CONFIG_TSEC_TBICR_SETTINGS CONFIG_TWL6030_POWER -CONFIG_TX_DESCR_NUM CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_UBIFS_VOLUME CONFIG_UBI_PART @@ -2959,131 +2090,52 @@ CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_UDP_CHECKSUM CONFIG_UEC_ETH -CONFIG_UEC_ETH1 CONFIG_UEC_ETH2 -CONFIG_UEC_ETH3 -CONFIG_UEC_ETH4 -CONFIG_UEC_ETH5 -CONFIG_UEC_ETH6 -CONFIG_UEC_ETH7 -CONFIG_UEC_ETH8 -CONFIG_UID16 -CONFIG_ULPI_REF_CLK CONFIG_UPDATEB -CONFIG_UPDATE_LOAD_ADDR CONFIG_USART_BASE CONFIG_USART_ID -CONFIG_USBD_CONFIGURATION_STR -CONFIG_USBD_CTRL_INTERFACE_STR -CONFIG_USBD_DATA_INTERFACE_STR CONFIG_USBD_HS CONFIG_USBD_MANUFACTURER CONFIG_USBD_PRODUCTID_CDCACM CONFIG_USBD_PRODUCTID_GSERIAL CONFIG_USBD_PRODUCT_NAME -CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE -CONFIG_USBD_SERIAL_BULK_PKTSIZE -CONFIG_USBD_SERIAL_INT_ENDPOINT -CONFIG_USBD_SERIAL_INT_PKTSIZE -CONFIG_USBD_SERIAL_IN_ENDPOINT -CONFIG_USBD_SERIAL_IN_PKTSIZE -CONFIG_USBD_SERIAL_OUT_ENDPOINT -CONFIG_USBD_SERIAL_OUT_PKTSIZE CONFIG_USBD_VENDORID CONFIG_USBNET_DEV_ADDR CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL -CONFIG_USB_BIN_FIXUP CONFIG_USB_BOOTING CONFIG_USB_DEVICE CONFIG_USB_DEV_BASE -CONFIG_USB_DEV_PULLUP_GPIO -CONFIG_USB_EHCI_BASE -CONFIG_USB_EHCI_BASE_LIST CONFIG_USB_EHCI_EXYNOS -CONFIG_USB_EHCI_FARADAY CONFIG_USB_EHCI_TXFIFO_THRESH -CONFIG_USB_ETH_QMULT -CONFIG_USB_ETH_SUBSET CONFIG_USB_EXT2_BOOT CONFIG_USB_FAT_BOOT -CONFIG_USB_GADGET_AMD5536UDC CONFIG_USB_GADGET_AT91 -CONFIG_USB_GADGET_DUMMY_HCD CONFIG_USB_GADGET_DWC2_OTG_PHY -CONFIG_USB_GADGET_FOTG210 -CONFIG_USB_GADGET_FSL_USB2 -CONFIG_USB_GADGET_GOKU -CONFIG_USB_GADGET_IMX -CONFIG_USB_GADGET_M66592 -CONFIG_USB_GADGET_MQ11XX -CONFIG_USB_GADGET_MUSBHSFC -CONFIG_USB_GADGET_N9604 -CONFIG_USB_GADGET_NET2280 -CONFIG_USB_GADGET_OMAP -CONFIG_USB_GADGET_PXA27X -CONFIG_USB_GADGET_PXA2XX -CONFIG_USB_GADGET_SA1100 -CONFIG_USB_INVENTRA_DMA CONFIG_USB_ISP1301_I2C_ADDR CONFIG_USB_MAX_CONTROLLER_COUNT -CONFIG_USB_MUSB_TIMEOUT -CONFIG_USB_MUSB_TUSB6010 CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW -CONFIG_USB_OTG -CONFIG_USB_OTG_BLACKLIST_HUB -CONFIG_USB_PXA25X_SMALL -CONFIG_USB_TI_CPPI_DMA CONFIG_USB_TTY -CONFIG_USB_TUSB_OMAP_DMA -CONFIG_USB_ULPI_TIMEOUT CONFIG_USB_XHCI_EXYNOS CONFIG_USE_INTERRUPT CONFIG_USE_ONENAND_BOARD_INIT -CONFIG_UTBIPAR_INIT_TBIPA -CONFIG_U_BOOT_HDR_ADDR CONFIG_U_BOOT_HDR_SIZE -CONFIG_VAL CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM CONFIG_VIDEO_BCM2835 CONFIG_VIDEO_BMP_LOGO CONFIG_VIDEO_DA8XX -CONFIG_VIDEO_FONT_4X6 -CONFIG_VIDEO_LOGO -CONFIG_VIDEO_MXS_MODE_SYSTEM -CONFIG_VIDEO_STD_TIMINGS -CONFIG_VID_FLS_ENV -CONFIG_VM86 -CONFIG_VOIPAC_LCD -CONFIG_VOL_MONITOR_INA220 -CONFIG_VOL_MONITOR_IR36021_READ -CONFIG_VOL_MONITOR_IR36021_SET CONFIG_VSC7385_ENET CONFIG_VSC7385_IMAGE CONFIG_VSC7385_IMAGE_SIZE CONFIG_VSC9953 -CONFIG_WATCHDOG_NOWAYOUT CONFIG_WATCHDOG_PRESC CONFIG_WATCHDOG_RC CONFIG_WATCHDOG_TIMEOUT -CONFIG_WD_PERIOD -CONFIG_X86EMU_DEBUG CONFIG_X86EMU_RAW_IO CONFIG_X86_MRC_ADDR CONFIG_X86_REFCODE_ADDR CONFIG_X86_REFCODE_RUN_ADDR -CONFIG_XGI_XG22_BASE -CONFIG_XSENGINE CONFIG_XTFPGA -CONFIG_YAFFS_AUTO_UNICODE -CONFIG_YAFFS_CASE_INSENSITIVE -CONFIG_YAFFS_DEFINES_TYPES -CONFIG_YAFFS_UNICODE -CONFIG_YAFFS_UTIL -CONFIG_YAFFS_WINCE -CONFIG_YELLOW_LED -CONFIG_ZLT -CONFIG_eTSEC_MDIO_BUS diff --git a/scripts/env2string.awk b/scripts/env2string.awk new file mode 100644 index 0000000..1bfe9ed --- /dev/null +++ b/scripts/env2string.awk @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2021 Google, Inc +# +# SPDX-License-Identifier: GPL-2.0+ +# +# Awk script to parse a text file containing an environment and convert it +# to a C string which can be compiled into U-Boot. + +# The resulting output is: +# +# #define CONFIG_EXTRA_ENV_TEXT "<environment here>" +# +# If the input is empty, this script outputs a comment instead. + +BEGIN { + # env holds the env variable we are currently processing + env = ""; + ORS = "" +} + +# Skip empty lines, as these are generated by the clang preprocessor +NF { + do_output = 0 + + # Quote quotes + gsub("\"", "\\\"") + + # Avoid using the non-POSIX third parameter to match(), by splitting + # the work into several steps. + has_var = match($0, "^([^ \t=][^ =]*)=(.*)$") + + # Is this the start of a new environment variable? + if (has_var) { + if (length(env) != 0) { + # Record the value of the variable now completed + vars[var] = env + do_output = 1 + } + + # Collect the variable name. The value follows the '=' + match($0, "^([^ \t=][^ =]*)=") + var = substr($0, 1, RLENGTH - 1) + env = substr($0, RLENGTH + 1) + + # Deal with += which concatenates the new string to the existing + # variable. Again we are careful to use POSIX match() + if (length(env) != 0 && match(var, "^(.*)[+]$")) { + plusname = substr(var, RSTART, RLENGTH - 1) + # Allow var\+=val to indicate that the variable name is + # var+ and this is not actually a concatenation + if (substr(plusname, length(plusname)) == "\\") { + # Drop the backslash + sub(/\\[+]$/, "+", var) + } else { + var = plusname + env = vars[var] env + } + } + } else { + # Change newline to space + gsub(/^[ \t]+/, "") + + # Don't keep leading spaces generated by the previous blank line + if (length(env) == 0) { + env = $0 + } else { + env = env " " $0 + } + } +} + +END { + # Record the value of the variable now completed. If the variable is + # empty it is not set. + if (length(env) != 0) { + vars[var] = env + do_output = 1 + } + + if (do_output) { + printf("%s", "#define CONFIG_EXTRA_ENV_TEXT \"") + + # Print out all the variables + for (var in vars) { + env = vars[var] + print var "=" vars[var] "\\0" + } + print "\"\n" + } +} diff --git a/scripts/of_allowlist.txt b/scripts/of_allowlist.txt new file mode 100644 index 0000000..e82cf55 --- /dev/null +++ b/scripts/of_allowlist.txt @@ -0,0 +1 @@ +# List of boards which are permitted to use OF_HAS_PRIOR_STAGE without OF_BOARD diff --git a/test/dm/core.c b/test/dm/core.c index c9a7606..c76dfdb 100644 --- a/test/dm/core.c +++ b/test/dm/core.c @@ -307,11 +307,15 @@ static int dm_test_lifecycle(struct unit_test_state *uts) { int op_count[DM_TEST_OP_COUNT]; struct udevice *dev, *test_dev; + int start_dev_count, start_uc_count; + int dev_count, uc_count; int pingret; int ret; memcpy(op_count, dm_testdrv_op_count, sizeof(op_count)); + dm_get_stats(&start_dev_count, &start_uc_count); + ut_assertok(device_bind_by_name(uts->root, false, &driver_info_manual, &dev)); ut_assert(dev); @@ -319,6 +323,11 @@ static int dm_test_lifecycle(struct unit_test_state *uts) == op_count[DM_TEST_OP_BIND] + 1); ut_assert(!dev_get_priv(dev)); + /* We should have one more device */ + dm_get_stats(&dev_count, &uc_count); + ut_asserteq(start_dev_count + 1, dev_count); + ut_asserteq(start_uc_count, uc_count); + /* Probe the device - it should fail allocating private data */ uts->force_fail_alloc = 1; ret = device_probe(dev); @@ -353,6 +362,11 @@ static int dm_test_lifecycle(struct unit_test_state *uts) ut_asserteq(1, dm_testdrv_op_count[DM_TEST_OP_UNBIND]); ut_asserteq(1, dm_testdrv_op_count[DM_TEST_OP_PRE_UNBIND]); + /* We should have one less device */ + dm_get_stats(&dev_count, &uc_count); + ut_asserteq(start_dev_count, dev_count); + ut_asserteq(start_uc_count, uc_count); + return 0; } DM_TEST(dm_test_lifecycle, UT_TESTF_SCAN_PDATA | UT_TESTF_PROBE_TEST); @@ -526,17 +540,31 @@ DM_TEST(dm_test_leak, 0); /* Test uclass init/destroy methods */ static int dm_test_uclass(struct unit_test_state *uts) { + int dev_count, uc_count; struct uclass *uc; + /* We should have just the root device and uclass */ + dm_get_stats(&dev_count, &uc_count); + ut_asserteq(1, dev_count); + ut_asserteq(1, uc_count); + ut_assertok(uclass_get(UCLASS_TEST, &uc)); ut_asserteq(1, dm_testdrv_op_count[DM_TEST_OP_INIT]); ut_asserteq(0, dm_testdrv_op_count[DM_TEST_OP_DESTROY]); ut_assert(uclass_get_priv(uc)); + dm_get_stats(&dev_count, &uc_count); + ut_asserteq(1, dev_count); + ut_asserteq(2, uc_count); + ut_assertok(uclass_destroy(uc)); ut_asserteq(1, dm_testdrv_op_count[DM_TEST_OP_INIT]); ut_asserteq(1, dm_testdrv_op_count[DM_TEST_OP_DESTROY]); + dm_get_stats(&dev_count, &uc_count); + ut_asserteq(1, dev_count); + ut_asserteq(1, uc_count); + return 0; } DM_TEST(dm_test_uclass, 0); @@ -1217,3 +1245,16 @@ static int dm_test_dma_offset(struct unit_test_state *uts) } DM_TEST(dm_test_dma_offset, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); #endif + +/* Test dm_get_stats() */ +static int dm_test_get_stats(struct unit_test_state *uts) +{ + int dev_count, uc_count; + + dm_get_stats(&dev_count, &uc_count); + ut_assert(dev_count > 50); + ut_assert(uc_count > 30); + + return 0; +} +DM_TEST(dm_test_get_stats, UT_TESTF_SCAN_FDT); diff --git a/test/dm/ofnode.c b/test/dm/ofnode.c index cea0746..5e7c968 100644 --- a/test/dm/ofnode.c +++ b/test/dm/ofnode.c @@ -351,3 +351,99 @@ static int dm_test_ofnode_for_each_compatible_node(struct unit_test_state *uts) return 0; } DM_TEST(dm_test_ofnode_for_each_compatible_node, UT_TESTF_SCAN_FDT); + +static int dm_test_ofnode_string(struct unit_test_state *uts) +{ + const char **val; + const char *out; + ofnode node; + + node = ofnode_path("/a-test"); + ut_assert(ofnode_valid(node)); + + /* single string */ + ut_asserteq(1, ofnode_read_string_count(node, "str-value")); + ut_assertok(ofnode_read_string_index(node, "str-value", 0, &out)); + ut_asserteq_str("test string", out); + ut_asserteq(0, ofnode_stringlist_search(node, "str-value", + "test string")); + ut_asserteq(1, ofnode_read_string_list(node, "str-value", &val)); + ut_asserteq_str("test string", val[0]); + ut_assertnull(val[1]); + free(val); + + /* list of strings */ + ut_asserteq(5, ofnode_read_string_count(node, "mux-control-names")); + ut_assertok(ofnode_read_string_index(node, "mux-control-names", 0, + &out)); + ut_asserteq_str("mux0", out); + ut_asserteq(0, ofnode_stringlist_search(node, "mux-control-names", + "mux0")); + ut_asserteq(5, ofnode_read_string_list(node, "mux-control-names", + &val)); + ut_asserteq_str("mux0", val[0]); + ut_asserteq_str("mux1", val[1]); + ut_asserteq_str("mux2", val[2]); + ut_asserteq_str("mux3", val[3]); + ut_asserteq_str("mux4", val[4]); + ut_assertnull(val[5]); + free(val); + + ut_assertok(ofnode_read_string_index(node, "mux-control-names", 4, + &out)); + ut_asserteq_str("mux4", out); + ut_asserteq(4, ofnode_stringlist_search(node, "mux-control-names", + "mux4")); + + return 0; +} +DM_TEST(dm_test_ofnode_string, 0); + +static int dm_test_ofnode_string_err(struct unit_test_state *uts) +{ + const char **val; + const char *out; + ofnode node; + + /* + * Test error codes only on livetree, as they are different with + * flattree + */ + node = ofnode_path("/a-test"); + ut_assert(ofnode_valid(node)); + + /* non-existent property */ + ut_asserteq(-EINVAL, ofnode_read_string_count(node, "missing")); + ut_asserteq(-EINVAL, ofnode_read_string_index(node, "missing", 0, + &out)); + ut_asserteq(-EINVAL, ofnode_read_string_list(node, "missing", &val)); + + /* empty property */ + ut_asserteq(-ENODATA, ofnode_read_string_count(node, "bool-value")); + ut_asserteq(-ENODATA, ofnode_read_string_index(node, "bool-value", 0, + &out)); + ut_asserteq(-ENODATA, ofnode_read_string_list(node, "bool-value", + &val)); + + /* badly formatted string list */ + ut_asserteq(-EILSEQ, ofnode_read_string_count(node, "int64-value")); + ut_asserteq(-EILSEQ, ofnode_read_string_index(node, "int64-value", 0, + &out)); + ut_asserteq(-EILSEQ, ofnode_read_string_list(node, "int64-value", + &val)); + + /* out of range / not found */ + ut_asserteq(-ENODATA, ofnode_read_string_index(node, "str-value", 1, + &out)); + ut_asserteq(-ENODATA, ofnode_stringlist_search(node, "str-value", + "other")); + + /* negative value for index is not allowed, so don't test for that */ + + ut_asserteq(-ENODATA, ofnode_read_string_index(node, + "mux-control-names", 5, + &out)); + + return 0; +} +DM_TEST(dm_test_ofnode_string_err, UT_TESTF_LIVE_TREE); diff --git a/test/dm/video.c b/test/dm/video.c index da0ae36..d4a3c9c 100644 --- a/test/dm/video.c +++ b/test/dm/video.c @@ -7,12 +7,14 @@ #include <common.h> #include <bzlib.h> #include <dm.h> +#include <gzip.h> #include <log.h> #include <malloc.h> #include <mapmem.h> #include <os.h> #include <video.h> #include <video_console.h> +#include <asm/test.h> #include <dm/test.h> #include <dm/uclass-internal.h> #include <test/test.h> @@ -113,6 +115,31 @@ static int select_vidconsole(struct unit_test_state *uts, const char *drv_name) return 0; } +/** + * video_get_nologo() - Disable the logo on the video device and return it + * + * @uts: Test state + * @devp: Returns video device + * @return 0 if OK, -ve on error + */ +static int video_get_nologo(struct unit_test_state *uts, struct udevice **devp) +{ + struct video_uc_plat *uc_plat; + struct udevice *dev; + + ut_assertok(uclass_find_first_device(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + uc_plat = dev_get_uclass_plat(dev); + uc_plat->hide_logo = true; + + /* now probe it */ + ut_assertok(uclass_first_device_err(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + *devp = dev; + + return 0; +} + /* Test text output works on the video console */ static int dm_test_video_text(struct unit_test_state *uts) { @@ -123,7 +150,7 @@ static int dm_test_video_text(struct unit_test_state *uts) #define SCROLL_LINES 100 ut_assertok(select_vidconsole(uts, "vidconsole0")); - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_asserteq(46, compress_frame_buffer(uts, dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); @@ -155,7 +182,7 @@ static int dm_test_video_chars(struct unit_test_state *uts) const char *test_string = "Well\b\b\b\bxhe is\r \n\ta very \amodest \bman\n\t\tand Has much to\b\bto be modest about."; ut_assertok(select_vidconsole(uts, "vidconsole0")); - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_put_string(con, test_string); ut_asserteq(466, compress_frame_buffer(uts, dev)); @@ -172,7 +199,7 @@ static int dm_test_video_ansi(struct unit_test_state *uts) struct udevice *dev, *con; ut_assertok(select_vidconsole(uts, "vidconsole0")); - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); /* reference clear: */ @@ -220,7 +247,7 @@ static int check_vidconsole_output(struct unit_test_state *uts, int rot, plat = dev_get_plat(dev); plat->rot = rot; - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); ut_asserteq(46, compress_frame_buffer(uts, dev)); @@ -309,7 +336,7 @@ static int dm_test_video_bmp(struct unit_test_state *uts) struct udevice *dev; ulong addr; - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_assertok(read_file(uts, "tools/logos/denx.bmp", &addr)); ut_assertok(video_bmp_display(dev, addr, 0, 0, false)); @@ -319,13 +346,119 @@ static int dm_test_video_bmp(struct unit_test_state *uts) } DM_TEST(dm_test_video_bmp, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* Test drawing a bitmap file on a 8bpp display */ +static int dm_test_video_bmp8(struct unit_test_state *uts) +{ + struct udevice *dev; + ulong addr; + + ut_assertok(uclass_find_first_device(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + ut_assertok(sandbox_sdl_set_bpp(dev, VIDEO_BPP8)); + + ut_assertok(read_file(uts, "tools/logos/denx.bmp", &addr)); + + ut_assertok(video_bmp_display(dev, addr, 0, 0, false)); + ut_asserteq(1247, compress_frame_buffer(uts, dev)); + + return 0; +} +DM_TEST(dm_test_video_bmp8, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); + +/* Test drawing a bitmap file on a 16bpp display */ +static int dm_test_video_bmp16(struct unit_test_state *uts) +{ + ulong src, src_len = ~0UL; + uint dst_len = ~0U; + struct udevice *dev; + ulong dst = 0x10000; + + ut_assertok(uclass_find_first_device(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + ut_assertok(sandbox_sdl_set_bpp(dev, VIDEO_BPP16)); + + ut_assertok(read_file(uts, "tools/logos/denx-16bpp.bmp.gz", &src)); + ut_assertok(gunzip(map_sysmem(dst, 0), dst_len, map_sysmem(src, 0), + &src_len)); + + ut_assertok(video_bmp_display(dev, dst, 0, 0, false)); + ut_asserteq(3700, compress_frame_buffer(uts, dev)); + + return 0; +} +DM_TEST(dm_test_video_bmp16, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); + +/* Test drawing a 24bpp bitmap file on a 16bpp display */ +static int dm_test_video_bmp24(struct unit_test_state *uts) +{ + ulong src, src_len = ~0UL; + uint dst_len = ~0U; + struct udevice *dev; + ulong dst = 0x10000; + + ut_assertok(uclass_find_first_device(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + ut_assertok(sandbox_sdl_set_bpp(dev, VIDEO_BPP16)); + + ut_assertok(read_file(uts, "tools/logos/denx-24bpp.bmp.gz", &src)); + ut_assertok(gunzip(map_sysmem(dst, 0), dst_len, map_sysmem(src, 0), + &src_len)); + + ut_assertok(video_bmp_display(dev, dst, 0, 0, false)); + ut_asserteq(3656, compress_frame_buffer(uts, dev)); + + return 0; +} +DM_TEST(dm_test_video_bmp24, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); + +/* Test drawing a 24bpp bitmap file on a 32bpp display */ +static int dm_test_video_bmp24_32(struct unit_test_state *uts) +{ + ulong src, src_len = ~0UL; + uint dst_len = ~0U; + struct udevice *dev; + ulong dst = 0x10000; + + ut_assertok(uclass_find_first_device(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + ut_assertok(sandbox_sdl_set_bpp(dev, VIDEO_BPP32)); + + ut_assertok(read_file(uts, "tools/logos/denx-24bpp.bmp.gz", &src)); + ut_assertok(gunzip(map_sysmem(dst, 0), dst_len, map_sysmem(src, 0), + &src_len)); + + ut_assertok(video_bmp_display(dev, dst, 0, 0, false)); + ut_asserteq(6827, compress_frame_buffer(uts, dev)); + + return 0; +} +DM_TEST(dm_test_video_bmp24_32, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); + +/* Test drawing a bitmap file on a 32bpp display */ +static int dm_test_video_bmp32(struct unit_test_state *uts) +{ + struct udevice *dev; + ulong addr; + + ut_assertok(uclass_find_first_device(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + ut_assertok(sandbox_sdl_set_bpp(dev, VIDEO_BPP32)); + ut_assertok(read_file(uts, "tools/logos/denx.bmp", &addr)); + + ut_assertok(video_bmp_display(dev, addr, 0, 0, false)); + ut_asserteq(2024, compress_frame_buffer(uts, dev)); + + return 0; +} +DM_TEST(dm_test_video_bmp32, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); + /* Test drawing a compressed bitmap file */ static int dm_test_video_bmp_comp(struct unit_test_state *uts) { struct udevice *dev; ulong addr; - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_assertok(read_file(uts, "tools/logos/denx-comp.bmp", &addr)); ut_assertok(video_bmp_display(dev, addr, 0, 0, false)); @@ -335,13 +468,51 @@ static int dm_test_video_bmp_comp(struct unit_test_state *uts) } DM_TEST(dm_test_video_bmp_comp, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* Test drawing a bitmap file on a 32bpp display */ +static int dm_test_video_comp_bmp32(struct unit_test_state *uts) +{ + struct udevice *dev; + ulong addr; + + ut_assertok(uclass_find_first_device(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + ut_assertok(sandbox_sdl_set_bpp(dev, VIDEO_BPP32)); + + ut_assertok(read_file(uts, "tools/logos/denx.bmp", &addr)); + + ut_assertok(video_bmp_display(dev, addr, 0, 0, false)); + ut_asserteq(2024, compress_frame_buffer(uts, dev)); + + return 0; +} +DM_TEST(dm_test_video_comp_bmp32, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); + +/* Test drawing a bitmap file on a 8bpp display */ +static int dm_test_video_comp_bmp8(struct unit_test_state *uts) +{ + struct udevice *dev; + ulong addr; + + ut_assertok(uclass_find_first_device(UCLASS_VIDEO, &dev)); + ut_assertnonnull(dev); + ut_assertok(sandbox_sdl_set_bpp(dev, VIDEO_BPP8)); + + ut_assertok(read_file(uts, "tools/logos/denx.bmp", &addr)); + + ut_assertok(video_bmp_display(dev, addr, 0, 0, false)); + ut_asserteq(1247, compress_frame_buffer(uts, dev)); + + return 0; +} +DM_TEST(dm_test_video_comp_bmp8, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); + /* Test TrueType console */ static int dm_test_video_truetype(struct unit_test_state *uts) { struct udevice *dev, *con; const char *test_string = "Criticism may not be agreeable, but it is necessary. It fulfils the same function as pain in the human body. It calls attention to an unhealthy state of things. Some see private enterprise as a predatory target to be shot, others as a cow to be milked, but few are those who see it as a sturdy horse pulling the wagon. The \aprice OF\b\bof greatness\n\tis responsibility.\n\nBye"; - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_put_string(con, test_string); ut_asserteq(12237, compress_frame_buffer(uts, dev)); @@ -362,7 +533,7 @@ static int dm_test_video_truetype_scroll(struct unit_test_state *uts) plat = dev_get_plat(dev); plat->font_size = 100; - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_put_string(con, test_string); ut_asserteq(35030, compress_frame_buffer(uts, dev)); @@ -383,7 +554,7 @@ static int dm_test_video_truetype_bs(struct unit_test_state *uts) plat = dev_get_plat(dev); plat->font_size = 100; - ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev)); + ut_assertok(video_get_nologo(uts, &dev)); ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con)); vidconsole_put_string(con, test_string); ut_asserteq(29018, compress_frame_buffer(uts, dev)); diff --git a/test/py/conftest.py b/test/py/conftest.py index 11a3f30..16e445c 100644 --- a/test/py/conftest.py +++ b/test/py/conftest.py @@ -226,7 +226,7 @@ def pytest_configure(config): import u_boot_console_exec_attach console = u_boot_console_exec_attach.ConsoleExecAttach(log, ubconfig) -re_ut_test_list = re.compile(r'[^a-zA-Z0-9_]_u_boot_list_2_ut_(.*)_test_2_\1_test_(.*)\s*$') +re_ut_test_list = re.compile(r'[^a-zA-Z0-9_]_u_boot_list_2_ut_(.*)_test_2_(.*)\s*$') def generate_ut_subtest(metafunc, fixture_name, sym_path): """Provide parametrization for a ut_subtest fixture. diff --git a/test/py/multiplexed_log.py b/test/py/multiplexed_log.py index 442edad..5e79075 100644 --- a/test/py/multiplexed_log.py +++ b/test/py/multiplexed_log.py @@ -111,7 +111,7 @@ class RunAndLog(object): """Clean up any resources managed by this object.""" pass - def run(self, cmd, cwd=None, ignore_errors=False): + def run(self, cmd, cwd=None, ignore_errors=False, stdin=None): """Run a command as a sub-process, and log the results. The output is available at self.output which can be useful if there is @@ -125,6 +125,7 @@ class RunAndLog(object): function will simply return if the command cannot be executed or exits with an error code, otherwise an exception will be raised if such problems occur. + stdin: Input string to pass to the command as stdin (or None) Returns: The output as a string. @@ -137,8 +138,9 @@ class RunAndLog(object): try: p = subprocess.Popen(cmd, cwd=cwd, - stdin=None, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - (stdout, stderr) = p.communicate() + stdin=subprocess.PIPE if stdin else None, + stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + (stdout, stderr) = p.communicate(input=stdin) if stdout is not None: stdout = stdout.decode('utf-8') if stderr is not None: @@ -165,7 +167,7 @@ class RunAndLog(object): if output and not output.endswith('\n'): output += '\n' if exit_status and not exception and not ignore_errors: - exception = Exception('Exit code: ' + str(exit_status)) + exception = ValueError('Exit code: ' + str(exit_status)) if exception: output += str(exception) + '\n' self.logfile.write(self, output) diff --git a/test/py/tests/test_env.py b/test/py/tests/test_env.py index 9bed2f4..f85cb03 100644 --- a/test/py/tests/test_env.py +++ b/test/py/tests/test_env.py @@ -7,6 +7,7 @@ import os import os.path from subprocess import call, check_call, CalledProcessError +import tempfile import pytest import u_boot_utils @@ -515,3 +516,109 @@ def test_env_ext4(state_test_env): finally: if fs_img: call('rm -f %s' % fs_img, shell=True) + +def test_env_text(u_boot_console): + """Test the script that converts the environment to a text file""" + + def check_script(intext, expect_val): + """Check a test case + + Args: + intext: Text to pass to the script + expect_val: Expected value of the CONFIG_EXTRA_ENV_TEXT string, or + None if we expect it not to be defined + """ + with tempfile.TemporaryDirectory() as path: + fname = os.path.join(path, 'infile') + with open(fname, 'w') as inf: + print(intext, file=inf) + result = u_boot_utils.run_and_log(cons, ['awk', '-f', script, fname]) + if expect_val is not None: + expect = '#define CONFIG_EXTRA_ENV_TEXT "%s"\n' % expect_val + assert result == expect + else: + assert result == '' + + cons = u_boot_console + script = os.path.join(cons.config.source_dir, 'scripts', 'env2string.awk') + + # simple script with a single var + check_script('fred=123', 'fred=123\\0') + + # no vars + check_script('', None) + + # two vars + check_script('''fred=123 +ernie=456''', 'fred=123\\0ernie=456\\0') + + # blank lines + check_script('''fred=123 + + +ernie=456 + +''', 'fred=123\\0ernie=456\\0') + + # append + check_script('''fred=123 +ernie=456 +fred+= 456''', 'fred=123 456\\0ernie=456\\0') + + # append from empty + check_script('''fred= +ernie=456 +fred+= 456''', 'fred= 456\\0ernie=456\\0') + + # variable with + in it + check_script('fred+ernie=123', 'fred+ernie=123\\0') + + # ignores variables that are empty + check_script('''fred= +fred+= +ernie=456''', 'ernie=456\\0') + + # single-character env name + check_script('''f=123 +e=456 +f+= 456''', 'e=456\\0f=123 456\\0') + + # contains quotes + check_script('''fred="my var" +ernie=another"''', 'fred=\\"my var\\"\\0ernie=another\\"\\0') + + # variable name ending in + + check_script('''fred\\+=my var +fred++= again''', 'fred+=my var again\\0') + + # variable name containing + + check_script('''fred+jane=both +fred+jane+=again +ernie=456''', 'fred+jane=bothagain\\0ernie=456\\0') + + # multi-line vars - new vars always start at column 1 + check_script('''fred=first + second +\tthird with tab + + after blank + confusing=oops +ernie=another"''', 'fred=first second third with tab after blank confusing=oops\\0ernie=another\\"\\0') + + # real-world example + check_script('''ubifs_boot= + env exists bootubipart || + env set bootubipart UBI; + env exists bootubivol || + env set bootubivol boot; + if ubi part ${bootubipart} && + ubifsmount ubi${devnum}:${bootubivol}; + then + devtype=ubi; + run scan_dev_for_boot; + fi +''', + 'ubifs_boot=env exists bootubipart || env set bootubipart UBI; ' + 'env exists bootubivol || env set bootubivol boot; ' + 'if ubi part ${bootubipart} && ubifsmount ubi${devnum}:${bootubivol}; ' + 'then devtype=ubi; run scan_dev_for_boot; fi\\0') diff --git a/test/py/u_boot_utils.py b/test/py/u_boot_utils.py index 089eda5..c4fc23a 100644 --- a/test/py/u_boot_utils.py +++ b/test/py/u_boot_utils.py @@ -157,7 +157,7 @@ def wait_until_file_open_fails(fn, ignore_errors): return raise Exception('File can still be opened') -def run_and_log(u_boot_console, cmd, ignore_errors=False): +def run_and_log(u_boot_console, cmd, ignore_errors=False, stdin=None): """Run a command and log its output. Args: @@ -169,6 +169,7 @@ def run_and_log(u_boot_console, cmd, ignore_errors=False): will simply return if the command cannot be executed or exits with an error code, otherwise an exception will be raised if such problems occur. + stdin: Input string to pass to the command as stdin (or None) Returns: The output as a string. @@ -176,7 +177,7 @@ def run_and_log(u_boot_console, cmd, ignore_errors=False): if isinstance(cmd, str): cmd = cmd.split() runner = u_boot_console.log.get_runner(cmd[0], sys.stdout) - output = runner.run(cmd, ignore_errors=ignore_errors) + output = runner.run(cmd, ignore_errors=ignore_errors, stdin=stdin) runner.close() return output diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst index 35de93b..3e063d1 100644 --- a/tools/binman/binman.rst +++ b/tools/binman/binman.rst @@ -232,26 +232,6 @@ You can use other, more specific CONFIG options - see 'Automatic .dtsi inclusion' below. -Using binman with OF_BOARD --------------------------------------------- - -Normally binman is used with a board configured with OF_SEPARATE or OF_EMBED. -This is a typical scenario where a device tree source that contains the binman -node is provided in the arch/<arch>/dts directory for a specific board. - -However for a board configured with OF_BOARD, no device tree blob is provided -in the U-Boot build phase hence the binman node information is not available. -In order to support such use case, a new Kconfig option BINMAN_STANDALONE_FDT -is introduced, to tell the build system that a standalone device tree blob -containing binman node is explicitly required. - -Note there is a Kconfig option BINMAN_FDT which enables U-Boot run time to -access information about binman entries, stored in the device tree in a binman -node. Generally speaking, this option makes sense for OF_SEPARATE or OF_EMBED. -For the other OF_CONTROL methods, it's quite possible binman node is not -available as binman is invoked during the build phase, thus this option is not -turned on by default for these OF_CONTROL methods. - Access to binman entry offsets at run time (symbols) ---------------------------------------------------- @@ -810,12 +790,14 @@ Binman will search for the following files in arch/<arch>/dts:: U-Boot will only use the first one that it finds. If you need to include a more general file you can do that from the more specific file using #include. -If you are having trouble figuring out what is going on, you can uncomment -the 'warning' line in scripts/Makefile.lib to see what it has found:: +If you are having trouble figuring out what is going on, you can use +`DEVICE_TREE_DEBUG=1` with your build:: - # Uncomment for debugging - # This shows all the files that were considered and the one that we chose. - # u_boot_dtsi_options_debug = $(u_boot_dtsi_options_raw) + make DEVICE_TREE_DEBUG=1 + scripts/Makefile.lib:334: Automatic .dtsi inclusion: options: + arch/arm/dts/juno-r2-u-boot.dtsi arch/arm/dts/-u-boot.dtsi + arch/arm/dts/armv8-u-boot.dtsi arch/arm/dts/armltd-u-boot.dtsi + arch/arm/dts/u-boot.dtsi ... found: "arch/arm/dts/juno-r2-u-boot.dtsi" Updating an ELF file @@ -913,6 +895,11 @@ or with wildcards:: u-boot-dtb 180 108 u-boot-dtb 80 3b5 image-header bf8 8 image-header bf8 +If an older version of binman is used to list images created by a newer one, it +is possible that it will contain entry types that are not supported. These still +show with the correct type, but binman just sees them as blobs (plain binary +data). Any special features of that etype are not supported by the old binman. + Extracting files from images ---------------------------- @@ -937,12 +924,41 @@ or just a selection:: $ binman extract -i image.bin "*u-boot*" -O outdir +Some entry types have alternative formats, for example fdtmap which allows +extracted just the devicetree binary without the fdtmap header:: + + $ binman extract -i /tmp/b/odroid-c4/image.bin -f out.dtb -F fdt fdtmap + $ fdtdump out.dtb + /dts-v1/; + // magic: 0xd00dfeed + // totalsize: 0x8ab (2219) + // off_dt_struct: 0x38 + // off_dt_strings: 0x82c + // off_mem_rsvmap: 0x28 + // version: 17 + // last_comp_version: 2 + // boot_cpuid_phys: 0x0 + // size_dt_strings: 0x7f + // size_dt_struct: 0x7f4 + + / { + image-node = "binman"; + image-pos = <0x00000000>; + size = <0x0011162b>; + ... + +Use `-F list` to see what alternative formats are available:: + + $ binman extract -i /tmp/b/odroid-c4/image.bin -F list + Flag (-F) Entry type Description + fdt fdtmap Extract the devicetree blob from the fdtmap + Replacing files in an image --------------------------- You can replace files in an existing firmware image created by binman, provided -that there is an 'fdtmap' entry in the image. For example: +that there is an 'fdtmap' entry in the image. For example:: $ binman replace -i image.bin section/cbfs/u-boot @@ -1081,6 +1097,35 @@ the tool's output will be used for the target or for the host machine. If those aren't given, it will also try to derive target-specific versions from the CROSS_COMPILE environment variable during a cross-compilation. +If the tool is not available in the path you can use BINMAN_TOOLPATHS to specify +a space-separated list of paths to search, e.g.:: + + BINMAN_TOOLPATHS="/tools/g12a /tools/tegra" binman ... + + +External blobs +-------------- + +Binary blobs, even if the source code is available, complicate building +firmware. The instructions can involve multiple steps and the binaries may be +hard to build or obtain. Binman at least provides a unified description of how +to build the final image, no matter what steps are needed to get there. + +Binman also provides a `blob-ext` entry type that pulls in a binary blob from an +external file. If the file is missing, binman can optionally complete the build +and just report a warning. Use the `-M/--allow-missing` option to enble this. +This is useful in CI systems which want to check that everything is correct but +don't have access to the blobs. + +If the blobs are in a different directory, you can specify this with the `-I` +option. + +For U-Boot, you can use set the BINMAN_INDIRS environment variable to provide a +space-separated list of directories to search for binary blobs:: + + BINMAN_INDIRS="odroid-c4/fip/g12a \ + odroid-c4/build/board/hardkernel/odroidc4/firmware \ + odroid-c4/build/scp_task" binman ... Code coverage ------------- diff --git a/tools/binman/cmdline.py b/tools/binman/cmdline.py index e73ff78..adc1754 100644 --- a/tools/binman/cmdline.py +++ b/tools/binman/cmdline.py @@ -2,18 +2,68 @@ # Copyright (c) 2016 Google, Inc # Written by Simon Glass <sjg@chromium.org> # -# Command-line parser for binman -# +"""Command-line parser for binman""" + +import argparse from argparse import ArgumentParser +import state + +def make_extract_parser(subparsers): + """make_extract_parser: Make a subparser for the 'extract' command + + Args: + subparsers (ArgumentParser): parser to add this one to + """ + extract_parser = subparsers.add_parser('extract', + help='Extract files from an image') + extract_parser.add_argument('-F', '--format', type=str, + help='Select an alternative format for extracted data') + extract_parser.add_argument('-i', '--image', type=str, required=True, + help='Image filename to extract') + extract_parser.add_argument('-f', '--filename', type=str, + help='Output filename to write to') + extract_parser.add_argument('-O', '--outdir', type=str, default='', + help='Path to directory to use for output files') + extract_parser.add_argument('paths', type=str, nargs='*', + help='Paths within file to extract (wildcard)') + extract_parser.add_argument('-U', '--uncompressed', action='store_true', + help='Output raw uncompressed data for compressed entries') + + +#pylint: disable=R0903 +class BinmanVersion(argparse.Action): + """Handles the -V option to binman + + This reads the version information from a file called 'version' in the same + directory as this file. + + If not present it assumes this is running from the U-Boot tree and collects + the version from the Makefile. + + The format of the version information is three VAR = VALUE lines, for + example: + + VERSION = 2022 + PATCHLEVEL = 01 + EXTRAVERSION = -rc2 + """ + def __init__(self, nargs=0, **kwargs): + super().__init__(nargs=nargs, **kwargs) + + def __call__(self, parser, namespace, values, option_string=None): + parser._print_message(f'Binman {state.GetVersion()}\n') + parser.exit() + def ParseArgs(argv): """Parse the binman command-line arguments Args: - argv: List of string arguments + argv (list of str): List of string arguments + Returns: - Tuple (options, args) with the command-line options and arugments. + tuple: (options, args) with the command-line options and arugments. options provides access to the options (e.g. option.debug) args is a list of string arguments """ @@ -39,6 +89,7 @@ controlled by a description in the board device tree.''' parser.add_argument('-v', '--verbosity', default=1, type=int, help='Control verbosity: 0=silent, 1=warnings, 2=notices, ' '3=info, 4=detail, 5=debug') + parser.add_argument('-V', '--version', nargs=0, action=BinmanVersion) subparsers = parser.add_subparsers(dest='cmd') subparsers.required = True @@ -74,8 +125,8 @@ controlled by a description in the board device tree.''' build_parser.add_argument('--update-fdt-in-elf', type=str, help='Update an ELF file with the output dtb: infile,outfile,begin_sym,end_sym') - entry_parser = subparsers.add_parser('entry-docs', - help='Write out entry documentation (see entries.rst)') + subparsers.add_parser( + 'entry-docs', help='Write out entry documentation (see entries.rst)') list_parser = subparsers.add_parser('ls', help='List files in an image') list_parser.add_argument('-i', '--image', type=str, required=True, @@ -83,18 +134,7 @@ controlled by a description in the board device tree.''' list_parser.add_argument('paths', type=str, nargs='*', help='Paths within file to list (wildcard)') - extract_parser = subparsers.add_parser('extract', - help='Extract files from an image') - extract_parser.add_argument('-i', '--image', type=str, required=True, - help='Image filename to extract') - extract_parser.add_argument('-f', '--filename', type=str, - help='Output filename to write to') - extract_parser.add_argument('-O', '--outdir', type=str, default='', - help='Path to directory to use for output files') - extract_parser.add_argument('paths', type=str, nargs='*', - help='Paths within file to extract (wildcard)') - extract_parser.add_argument('-U', '--uncompressed', action='store_true', - help='Output raw uncompressed data for compressed entries') + make_extract_parser(subparsers) replace_parser = subparsers.add_parser('replace', help='Replace entries in an image') diff --git a/tools/binman/control.py b/tools/binman/control.py index 304fc70..dcf070d 100644 --- a/tools/binman/control.py +++ b/tools/binman/control.py @@ -200,8 +200,24 @@ def ReadEntry(image_fname, entry_path, decomp=True): return entry.ReadData(decomp) +def ShowAltFormats(image): + """Show alternative formats available for entries in the image + + This shows a list of formats available. + + Args: + image (Image): Image to check + """ + alt_formats = {} + image.CheckAltFormats(alt_formats) + print('%-10s %-20s %s' % ('Flag (-F)', 'Entry type', 'Description')) + for name, val in alt_formats.items(): + entry, helptext = val + print('%-10s %-20s %s' % (name, entry.etype, helptext)) + + def ExtractEntries(image_fname, output_fname, outdir, entry_paths, - decomp=True): + decomp=True, alt_format=None): """Extract the data from one or more entries and write it to files Args: @@ -217,6 +233,10 @@ def ExtractEntries(image_fname, output_fname, outdir, entry_paths, """ image = Image.FromFile(image_fname) + if alt_format == 'list': + ShowAltFormats(image) + return + # Output an entry to a single file, as a special case if output_fname: if not entry_paths: @@ -224,7 +244,7 @@ def ExtractEntries(image_fname, output_fname, outdir, entry_paths, if len(entry_paths) != 1: raise ValueError('Must specify exactly one entry path to write with -f') entry = image.FindEntryPath(entry_paths[0]) - data = entry.ReadData(decomp) + data = entry.ReadData(decomp, alt_format) tools.WriteFile(output_fname, data) tout.Notice("Wrote %#x bytes to file '%s'" % (len(data), output_fname)) return @@ -236,7 +256,7 @@ def ExtractEntries(image_fname, output_fname, outdir, entry_paths, tout.Notice('%d entries match and will be written' % len(einfos)) for einfo in einfos: entry = einfo.entry - data = entry.ReadData(decomp) + data = entry.ReadData(decomp, alt_format) path = entry.GetPath()[1:] fname = os.path.join(outdir, path) @@ -355,6 +375,7 @@ def ReplaceEntries(image_fname, input_fname, indir, entry_paths, Returns: List of EntryInfo records that were written """ + image_fname = os.path.abspath(image_fname) image = Image.FromFile(image_fname) # Replace an entry from a single file, as a special case @@ -583,7 +604,7 @@ def Binman(args): if args.cmd == 'extract': ExtractEntries(args.image, args.filename, args.outdir, args.paths, - not args.uncompressed) + not args.uncompressed, args.format) if args.cmd == 'replace': ReplaceEntries(args.image, args.filename, args.indir, args.paths, diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst index dcac700..c47f7df 100644 --- a/tools/binman/entries.rst +++ b/tools/binman/entries.rst @@ -25,6 +25,160 @@ about ATF. +Entry: atf-fip: ARM Trusted Firmware's Firmware Image Package (FIP) +------------------------------------------------------------------- + +A FIP_ provides a way to group binaries in a firmware image, used by ARM's +Trusted Firmware A (TF-A) code. It is a simple format consisting of a +table of contents with information about the type, offset and size of the +binaries in the FIP. It is quite similar to FMAP, with the major difference +that it uses UUIDs to indicate the type of each entry. + +Note: It is recommended to always add an fdtmap to every image, as well as +any FIPs so that binman and other tools can access the entire image +correctly. + +The UUIDs correspond to useful names in `fiptool`, provided by ATF to +operate on FIPs. Binman uses these names to make it easier to understand +what is going on, although it is possible to provide a UUID if needed. + +The contents of the FIP are defined by subnodes of the atf-fip entry, e.g.:: + + atf-fip { + soc-fw { + filename = "bl31.bin"; + }; + + scp-fwu-cfg { + filename = "bl2u.bin"; + }; + + u-boot { + fip-type = "nt-fw"; + }; + }; + +This describes a FIP with three entries: soc-fw, scp-fwu-cfg and nt-fw. +You can use normal (non-external) binaries like U-Boot simply by adding a +FIP type, with the `fip-type` property, as above. + +Since FIP exists to bring blobs together, Binman assumes that all FIP +entries are external binaries. If a binary may not exist, you can use the +`--allow-missing` flag to Binman, in which case the image is still created, +even though it will not actually work. + +The size of the FIP depends on the size of the binaries. There is currently +no way to specify a fixed size. If the `atf-fip` node has a `size` entry, +this affects the space taken up by the `atf-fip` entry, but the FIP itself +does not expand to use that space. + +Some other FIP features are available with Binman. The header and the +entries have 64-bit flag works. The flag flags do not seem to be defined +anywhere, but you can use `fip-hdr-flags` and fip-flags` to set the values +of the header and entries respectively. + +FIP entries can be aligned to a particular power-of-two boundary. Use +fip-align for this. + +Binman only understands the entry types that are included in its +implementation. It is possible to specify a 16-byte UUID instead, using the +fip-uuid property. In this case Binman doesn't know what its type is, so +just uses the UUID. See the `u-boot` node in this example:: + + binman { + atf-fip { + fip-hdr-flags = /bits/ 64 <0x123>; + fip-align = <16>; + soc-fw { + fip-flags = /bits/ 64 <0x456>; + filename = "bl31.bin"; + }; + + scp-fwu-cfg { + filename = "bl2u.bin"; + }; + + u-boot { + fip-uuid = [fc 65 13 92 4a 5b 11 ec + 94 35 ff 2d 1c fc 79 9c]; + }; + }; + fdtmap { + }; + }; + +Binman allows reading and updating FIP entries after the image is created, +provided that an FDPMAP is present too. Updates which change the size of a +FIP entry will cause it to be expanded or contracted as needed. + +Properties for top-level atf-fip node +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +fip-hdr-flags (64 bits) + Sets the flags for the FIP header. + +Properties for subnodes +~~~~~~~~~~~~~~~~~~~~~~~ + +fip-type (str) + FIP type to use for this entry. This is needed if the entry + name is not a valid type. Value types are defined in `fip_util.py`. + The FIP type defines the UUID that is used (they map 1:1). + +fip-uuid (16 bytes) + If there is no FIP-type name defined, or it is not supported by Binman, + this property sets the UUID. It should be a 16-byte value, following the + hex digits of the UUID. + +fip-flags (64 bits) + Set the flags for a FIP entry. Use in one of the subnodes of the + 7atf-fip entry. + +fip-align + Set the alignment for a FIP entry, FIP entries can be aligned to a + particular power-of-two boundary. The default is 1. + +Adding new FIP-entry types +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When new FIP entries are defined by TF-A they appear in the +`TF-A source tree`_. You can use `fip_util.py` to update Binman to support +new types, then `send a patch`_ to the U-Boot mailing list. There are two +source files that the tool examples: + +- `include/tools_share/firmware_image_package.h` has the UUIDs +- `tools/fiptool/tbbr_config.c` has the name and descripion for each UUID + +To run the tool:: + + $ tools/binman/fip_util.py -s /path/to/arm-trusted-firmware + Warning: UUID 'UUID_NON_TRUSTED_WORLD_KEY_CERT' is not mentioned in tbbr_config.c file + Existing code in 'tools/binman/fip_util.py' is up-to-date + +If it shows there is an update, it writes a new version of `fip_util.py` +to `fip_util.py.out`. You can change the output file using the `-i` flag. +If you have a problem, use `-D` to enable traceback debugging. + +FIP commentary +~~~~~~~~~~~~~~ + +As a side effect of use of UUIDs, FIP does not support multiple +entries of the same type, such as might be used to store fonts or graphics +icons, for example. For verified boot it could be used for each part of the +image (e.g. separate FIPs for A and B) but cannot describe the whole +firmware image. As with FMAP there is no hierarchy defined, although FMAP +works around this by having 'section' areas which encompass others. A +similar workaround would be possible with FIP but is not currently defined. + +It is recommended to always add an fdtmap to every image, as well as any +FIPs so that binman and other tools can access the entire image correctly. + +.. _FIP: https://trustedfirmware-a.readthedocs.io/en/latest/design/firmware-design.html#firmware-image-package-fip +.. _`TF-A source tree`: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git +.. _`send a patch`: https://www.denx.de/wiki/U-Boot/Patches + + + Entry: blob: Arbitrary binary blob ---------------------------------- @@ -69,6 +223,20 @@ See 'blob' for Properties / Entry arguments. +Entry: blob-ext-list: List of externally built binary blobs +----------------------------------------------------------- + +This is like blob-ext except that a number of blobs can be provided, +typically with some sort of relationship, e.g. all are DDC parameters. + +If any of the external files needed by this llist is missing, binman can +optionally ignore it and produce a broken image with a warning. + +Args: + filenames: List of filenames to read and include + + + Entry: blob-named-by-arg: A blob entry which gets its filename property from its subclass ----------------------------------------------------------------------------------------- @@ -314,6 +482,10 @@ Example output for a simple image with U-Boot and an FDT map:: If allow-repack is used then 'orig-offset' and 'orig-size' properties are added as necessary. See the binman README. +When extracting files, an alternative 'fdt' format is available for fdtmaps. +Use `binman extract -F fdt ...` to use this. It will export a devicetree, +without the fdtmap header, so it can be viewed with `fdtdump`. + Entry: files: A set of files arranged in a section @@ -799,39 +971,135 @@ This entry holds firmware for an external platform-specific coprocessor. Entry: section: Entry that contains other entries ------------------------------------------------- -Properties / Entry arguments: (see binman README for more information): - pad-byte: Pad byte to use when padding - sort-by-offset: True if entries should be sorted by offset, False if - they must be in-order in the device tree description - - end-at-4gb: Used to build an x86 ROM which ends at 4GB (2^32) - - skip-at-start: Number of bytes before the first entry starts. These - effectively adjust the starting offset of entries. For example, - if this is 16, then the first entry would start at 16. An entry - with offset = 20 would in fact be written at offset 4 in the image - file, since the first 16 bytes are skipped when writing. - name-prefix: Adds a prefix to the name of every entry in the section - when writing out the map - align_default: Default alignment for this section, if no alignment is - given in the entry - -Properties: - allow_missing: True if this section permits external blobs to be - missing their contents. The second will produce an image but of - course it will not work. - -Properties: - _allow_missing: True if this section permits external blobs to be - missing their contents. The second will produce an image but of - course it will not work. +A section is an entry which can contain other entries, thus allowing +hierarchical images to be created. See 'Sections and hierarchical images' +in the binman README for more information. + +The base implementation simply joins the various entries together, using +various rules about alignment, etc. + +Subclassing +~~~~~~~~~~~ + +This class can be subclassed to support other file formats which hold +multiple entries, such as CBFS. To do this, override the following +functions. The documentation here describes what your function should do. +For example code, see etypes which subclass `Entry_section`, or `cbfs.py` +for a more involved example:: + + $ grep -l \(Entry_section tools/binman/etype/*.py + +ReadNode() + Call `super().ReadNode()`, then read any special properties for the + section. Then call `self.ReadEntries()` to read the entries. + + Binman calls this at the start when reading the image description. + +ReadEntries() + Read in the subnodes of the section. This may involve creating entries + of a particular etype automatically, as well as reading any special + properties in the entries. For each entry, entry.ReadNode() should be + called, to read the basic entry properties. The properties should be + added to `self._entries[]`, in the correct order, with a suitable name. + + Binman calls this at the start when reading the image description. + +BuildSectionData(required) + Create the custom file format that you want and return it as bytes. + This likely sets up a file header, then loops through the entries, + adding them to the file. For each entry, call `entry.GetData()` to + obtain the data. If that returns None, and `required` is False, then + this method must give up and return None. But if `required` is True then + it should assume that all data is valid. + + Binman calls this when packing the image, to find out the size of + everything. It is called again at the end when building the final image. + +SetImagePos(image_pos): + Call `super().SetImagePos(image_pos)`, then set the `image_pos` values + for each of the entries. This should use the custom file format to find + the `start offset` (and `image_pos`) of each entry. If the file format + uses compression in such a way that there is no offset available (other + than reading the whole file and decompressing it), then the offsets for + affected entries can remain unset (`None`). The size should also be set + if possible. + + Binman calls this after the image has been packed, to update the + location that all the entries ended up at. + +ReadChildData(child, decomp, alt_format): + The default version of this may be good enough, if you are able to + implement SetImagePos() correctly. But that is a bit of a bypass, so + you can override this method to read from your custom file format. It + should read the entire entry containing the custom file using + `super().ReadData(True)`, then parse the file to get the data for the + given child, then return that data. + + If your file format supports compression, the `decomp` argument tells + you whether to return the compressed data (`decomp` is False) or to + uncompress it first, then return the uncompressed data (`decomp` is + True). This is used by the `binman extract -U` option. + + If your entry supports alternative formats, the alt_format provides the + alternative format that the user has selected. Your function should + return data in that format. This is used by the 'binman extract -l' + option. + + Binman calls this when reading in an image, in order to populate all the + entries with the data from that image (`binman ls`). + +WriteChildData(child): + Binman calls this after `child.data` is updated, to inform the custom + file format about this, in case it needs to do updates. + + The default version of this does nothing and probably needs to be + overridden for the 'binman replace' command to work. Your version should + use `child.data` to update the data for that child in the custom file + format. + + Binman calls this when updating an image that has been read in and in + particular to update the data for a particular entry (`binman replace`) + +Properties / Entry arguments +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +See :ref:`develop/package/binman:Image description format` for more +information. + +align-default + Default alignment for this section, if no alignment is given in the + entry + +pad-byte + Pad byte to use when padding + +sort-by-offset + True if entries should be sorted by offset, False if they must be + in-order in the device tree description + +end-at-4gb + Used to build an x86 ROM which ends at 4GB (2^32) + +name-prefix + Adds a prefix to the name of every entry in the section when writing out + the map + +skip-at-start + Number of bytes before the first entry starts. These effectively adjust + the starting offset of entries. For example, if this is 16, then the + first entry would start at 16. An entry with offset = 20 would in fact + be written at offset 4 in the image file, since the first 16 bytes are + skipped when writing. Since a section is also an entry, it inherits all the properies of entries too. -A section is an entry which can contain other entries, thus allowing -hierarchical images to be created. See 'Sections and hierarchical images' -in the binman README for more information. +Note that the `allow_missing` member controls whether this section permits +external blobs to be missing their contents. The option will produce an +image but of course it will not work. It is useful to make sure that +Continuous Integration systems can build without the binaries being +available. This is set by the `SetAllowMissing()` method, if +`--allow-missing` is passed to binman. diff --git a/tools/binman/entry.py b/tools/binman/entry.py index 7022271..61642bf 100644 --- a/tools/binman/entry.py +++ b/tools/binman/entry.py @@ -95,14 +95,14 @@ class Entry(object): self.pad_after = 0 self.offset_unset = False self.image_pos = None - self._expand_size = False + self.expand_size = False self.compress = 'none' self.missing = False self.external = False self.allow_missing = False @staticmethod - def Lookup(node_path, etype, expanded): + def FindEntryClass(etype, expanded): """Look up the entry class for a node. Args: @@ -113,10 +113,9 @@ class Entry(object): Returns: The entry class object if found, else None if not found and expanded - is True - - Raise: - ValueError if expanded is False and the class is not found + is True, else a tuple: + module name that could not be found + exception received """ # Convert something like 'u-boot@0' to 'u_boot' since we are only # interested in the type. @@ -137,30 +136,66 @@ class Entry(object): except ImportError as e: if expanded: return None - raise ValueError("Unknown entry type '%s' in node '%s' (expected etype/%s.py, error '%s'" % - (etype, node_path, module_name, e)) + return module_name, e modules[module_name] = module # Look up the expected class name return getattr(module, 'Entry_%s' % module_name) @staticmethod - def Create(section, node, etype=None, expanded=False): + def Lookup(node_path, etype, expanded, missing_etype=False): + """Look up the entry class for a node. + + Args: + node_node (str): Path name of Node object containing information + about the entry to create (used for errors) + etype (str): Entry type to use + expanded (bool): Use the expanded version of etype + missing_etype (bool): True to default to a blob etype if the + requested etype is not found + + Returns: + The entry class object if found, else None if not found and expanded + is True + + Raise: + ValueError if expanded is False and the class is not found + """ + # Convert something like 'u-boot@0' to 'u_boot' since we are only + # interested in the type. + cls = Entry.FindEntryClass(etype, expanded) + if cls is None: + return None + elif isinstance(cls, tuple): + if missing_etype: + cls = Entry.FindEntryClass('blob', False) + if isinstance(cls, tuple): # This should not fail + module_name, e = cls + raise ValueError( + "Unknown entry type '%s' in node '%s' (expected etype/%s.py, error '%s'" % + (etype, node_path, module_name, e)) + return cls + + @staticmethod + def Create(section, node, etype=None, expanded=False, missing_etype=False): """Create a new entry for a node. Args: - section: Section object containing this node - node: Node object containing information about the entry to - create - etype: Entry type to use, or None to work it out (used for tests) - expanded: True to use expanded versions of entries, where available + section (entry_Section): Section object containing this node + node (Node): Node object containing information about the entry to + create + etype (str): Entry type to use, or None to work it out (used for + tests) + expanded (bool): Use the expanded version of etype + missing_etype (bool): True to default to a blob etype if the + requested etype is not found Returns: A new Entry object of the correct type (a subclass of Entry) """ if not etype: etype = fdt_util.GetString(node, 'type', node.name) - obj = Entry.Lookup(node.path, etype, expanded) + obj = Entry.Lookup(node.path, etype, expanded, missing_etype) if obj and expanded: # Check whether to use the expanded entry new_etype = etype + '-expanded' @@ -170,7 +205,7 @@ class Entry(object): else: obj = None if not obj: - obj = Entry.Lookup(node.path, etype, False) + obj = Entry.Lookup(node.path, etype, False, missing_etype) # Call its constructor to get the object we want. return obj(section, etype, node) @@ -780,7 +815,7 @@ features to produce new behaviours. self.AddEntryInfo(entries, indent, self.name, self.etype, self.size, self.image_pos, self.uncomp_size, self.offset, self) - def ReadData(self, decomp=True): + def ReadData(self, decomp=True, alt_format=None): """Read the data for an entry from the image This is used when the image has been read in and we want to extract the @@ -797,19 +832,20 @@ features to produce new behaviours. # although compressed sections are currently not supported tout.Debug("ReadChildData section '%s', entry '%s'" % (self.section.GetPath(), self.GetPath())) - data = self.section.ReadChildData(self, decomp) + data = self.section.ReadChildData(self, decomp, alt_format) return data - def ReadChildData(self, child, decomp=True): + def ReadChildData(self, child, decomp=True, alt_format=None): """Read the data for a particular child entry This reads data from the parent and extracts the piece that relates to the given child. Args: - child: Child entry to read data for (must be valid) - decomp: True to decompress any compressed data before returning it; - False to return the raw, uncompressed data + child (Entry): Child entry to read data for (must be valid) + decomp (bool): True to decompress any compressed data before + returning it; False to return the raw, uncompressed data + alt_format (str): Alternative format to read in, or None Returns: Data for the child (bytes) @@ -822,6 +858,20 @@ features to produce new behaviours. self.ProcessContentsUpdate(data) self.Detail('Loaded data size %x' % len(data)) + def GetAltFormat(self, data, alt_format): + """Read the data for an extry in an alternative format + + Supported formats are list in the documentation for each entry. An + example is fdtmap which provides . + + Args: + data (bytes): Data to convert (this should have been produced by the + entry) + alt_format (str): Format to use + + """ + pass + def GetImage(self): """Get the image containing this entry @@ -860,7 +910,8 @@ features to produce new behaviours. """Handle writing the data in a child entry This should be called on the child's parent section after the child's - data has been updated. It + data has been updated. It should update any data structures needed to + validate that the update is successful. This base-class implementation does nothing, since the base Entry object does not have any children. @@ -870,7 +921,7 @@ features to produce new behaviours. Returns: True if the section could be updated successfully, False if the - data is such that the section could not updat + data is such that the section could not update """ return True @@ -961,3 +1012,13 @@ features to produce new behaviours. tout.Info("Node '%s': etype '%s': %s selected" % (node.path, etype, new_etype)) return True + + def CheckAltFormats(self, alt_formats): + """Add any alternative formats supported by this entry type + + Args: + alt_formats (dict): Dict to add alt_formats to: + key: Name of alt format + value: Help text + """ + pass diff --git a/tools/binman/entry_test.py b/tools/binman/entry_test.py index c3d5f3e..1b59c90 100644 --- a/tools/binman/entry_test.py +++ b/tools/binman/entry_test.py @@ -10,6 +10,7 @@ import sys import unittest from binman import entry +from binman.etype.blob import Entry_blob from dtoc import fdt from dtoc import fdt_util from patman import tools @@ -100,5 +101,13 @@ class TestEntry(unittest.TestCase): self.assertIn("Unknown entry type 'missing' in node '/binman/u-boot'", str(e.exception)) + def testMissingEtype(self): + """Test use of a blob etype when the requested one is not available""" + ent = entry.Entry.Create(None, self.GetNode(), 'missing', + missing_etype=True) + self.assertTrue(isinstance(ent, Entry_blob)) + self.assertEquals('missing', ent.etype) + + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/etype/atf_fip.py b/tools/binman/etype/atf_fip.py new file mode 100644 index 0000000..07e6c64 --- /dev/null +++ b/tools/binman/etype/atf_fip.py @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2019 Google LLC +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for the ARM Trusted Firmware's Firmware Image Package (FIP) +# format + +from collections import OrderedDict + +from binman.entry import Entry +from binman.etype.section import Entry_section +from binman.fip_util import FIP_TYPES, FipReader, FipWriter, UUID_LEN +from dtoc import fdt_util +from patman import tools + +class Entry_atf_fip(Entry_section): + """ARM Trusted Firmware's Firmware Image Package (FIP) + + A FIP_ provides a way to group binaries in a firmware image, used by ARM's + Trusted Firmware A (TF-A) code. It is a simple format consisting of a + table of contents with information about the type, offset and size of the + binaries in the FIP. It is quite similar to FMAP, with the major difference + that it uses UUIDs to indicate the type of each entry. + + Note: It is recommended to always add an fdtmap to every image, as well as + any FIPs so that binman and other tools can access the entire image + correctly. + + The UUIDs correspond to useful names in `fiptool`, provided by ATF to + operate on FIPs. Binman uses these names to make it easier to understand + what is going on, although it is possible to provide a UUID if needed. + + The contents of the FIP are defined by subnodes of the atf-fip entry, e.g.:: + + atf-fip { + soc-fw { + filename = "bl31.bin"; + }; + + scp-fwu-cfg { + filename = "bl2u.bin"; + }; + + u-boot { + fip-type = "nt-fw"; + }; + }; + + This describes a FIP with three entries: soc-fw, scp-fwu-cfg and nt-fw. + You can use normal (non-external) binaries like U-Boot simply by adding a + FIP type, with the `fip-type` property, as above. + + Since FIP exists to bring blobs together, Binman assumes that all FIP + entries are external binaries. If a binary may not exist, you can use the + `--allow-missing` flag to Binman, in which case the image is still created, + even though it will not actually work. + + The size of the FIP depends on the size of the binaries. There is currently + no way to specify a fixed size. If the `atf-fip` node has a `size` entry, + this affects the space taken up by the `atf-fip` entry, but the FIP itself + does not expand to use that space. + + Some other FIP features are available with Binman. The header and the + entries have 64-bit flag works. The flag flags do not seem to be defined + anywhere, but you can use `fip-hdr-flags` and fip-flags` to set the values + of the header and entries respectively. + + FIP entries can be aligned to a particular power-of-two boundary. Use + fip-align for this. + + Binman only understands the entry types that are included in its + implementation. It is possible to specify a 16-byte UUID instead, using the + fip-uuid property. In this case Binman doesn't know what its type is, so + just uses the UUID. See the `u-boot` node in this example:: + + binman { + atf-fip { + fip-hdr-flags = /bits/ 64 <0x123>; + fip-align = <16>; + soc-fw { + fip-flags = /bits/ 64 <0x456>; + filename = "bl31.bin"; + }; + + scp-fwu-cfg { + filename = "bl2u.bin"; + }; + + u-boot { + fip-uuid = [fc 65 13 92 4a 5b 11 ec + 94 35 ff 2d 1c fc 79 9c]; + }; + }; + fdtmap { + }; + }; + + Binman allows reading and updating FIP entries after the image is created, + provided that an FDPMAP is present too. Updates which change the size of a + FIP entry will cause it to be expanded or contracted as needed. + + Properties for top-level atf-fip node + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + fip-hdr-flags (64 bits) + Sets the flags for the FIP header. + + Properties for subnodes + ~~~~~~~~~~~~~~~~~~~~~~~ + + fip-type (str) + FIP type to use for this entry. This is needed if the entry + name is not a valid type. Value types are defined in `fip_util.py`. + The FIP type defines the UUID that is used (they map 1:1). + + fip-uuid (16 bytes) + If there is no FIP-type name defined, or it is not supported by Binman, + this property sets the UUID. It should be a 16-byte value, following the + hex digits of the UUID. + + fip-flags (64 bits) + Set the flags for a FIP entry. Use in one of the subnodes of the + 7atf-fip entry. + + fip-align + Set the alignment for a FIP entry, FIP entries can be aligned to a + particular power-of-two boundary. The default is 1. + + Adding new FIP-entry types + ~~~~~~~~~~~~~~~~~~~~~~~~~~ + + When new FIP entries are defined by TF-A they appear in the + `TF-A source tree`_. You can use `fip_util.py` to update Binman to support + new types, then `send a patch`_ to the U-Boot mailing list. There are two + source files that the tool examples: + + - `include/tools_share/firmware_image_package.h` has the UUIDs + - `tools/fiptool/tbbr_config.c` has the name and descripion for each UUID + + To run the tool:: + + $ tools/binman/fip_util.py -s /path/to/arm-trusted-firmware + Warning: UUID 'UUID_NON_TRUSTED_WORLD_KEY_CERT' is not mentioned in tbbr_config.c file + Existing code in 'tools/binman/fip_util.py' is up-to-date + + If it shows there is an update, it writes a new version of `fip_util.py` + to `fip_util.py.out`. You can change the output file using the `-i` flag. + If you have a problem, use `-D` to enable traceback debugging. + + FIP commentary + ~~~~~~~~~~~~~~ + + As a side effect of use of UUIDs, FIP does not support multiple + entries of the same type, such as might be used to store fonts or graphics + icons, for example. For verified boot it could be used for each part of the + image (e.g. separate FIPs for A and B) but cannot describe the whole + firmware image. As with FMAP there is no hierarchy defined, although FMAP + works around this by having 'section' areas which encompass others. A + similar workaround would be possible with FIP but is not currently defined. + + It is recommended to always add an fdtmap to every image, as well as any + FIPs so that binman and other tools can access the entire image correctly. + + .. _FIP: https://trustedfirmware-a.readthedocs.io/en/latest/design/firmware-design.html#firmware-image-package-fip + .. _`TF-A source tree`: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git + .. _`send a patch`: https://www.denx.de/wiki/U-Boot/Patches + """ + def __init__(self, section, etype, node): + # Put this here to allow entry-docs and help to work without libfdt + global state + from binman import state + + super().__init__(section, etype, node) + self.align_default = None + self._entries = OrderedDict() + self.reader = None + + def ReadNode(self): + """Read properties from the atf-fip node""" + super().ReadNode() + self._pad_byte = fdt_util.GetInt(self._node, 'pad-byte', 0) + self._fip_flags = fdt_util.GetInt64(self._node, 'fip-hdr-flags', 0) + self._fip_align = fdt_util.GetInt(self._node, 'fip-align', 1) + if tools.NotPowerOfTwo(self._fip_align): + raise ValueError("Node '%s': FIP alignment %s must be a power of two" % + (self._node.path, self._fip_align)) + self.ReadEntries() + + def ReadEntries(self): + """Read the subnodes to find out what should go in this FIP""" + for node in self._node.subnodes: + fip_type = None + etype = None + if node.name in FIP_TYPES: + fip_type = node.name + etype = 'blob-ext' + + entry = Entry.Create(self, node, etype) + entry._fip_uuid = fdt_util.GetBytes(node, 'fip-uuid', UUID_LEN) + if not fip_type and not entry._fip_uuid: + fip_type = fdt_util.GetString(node, 'fip-type') + if not fip_type: + self.Raise("Must provide a fip-type (node name '%s' is not a known FIP type)" % + node.name) + + entry._fip_type = fip_type + entry._fip_flags = fdt_util.GetInt64(node, 'fip-flags', 0) + entry.ReadNode() + entry._fip_name = node.name + self._entries[entry._fip_name] = entry + + def BuildSectionData(self, required): + """Override this function to create a custom format for the entries + + Arguments: + required (bool): True if the data must be valid, False if it may + be missing (entry.GetData() returns None + + Returns: + bytes: Data obtained, or None if None + """ + fip = FipWriter(self._fip_flags, self._fip_align) + for entry in self._entries.values(): + # First get the input data and put it in an entry. If not available, + # try later. + entry_data = entry.GetData(required) + if not required and entry_data is None: + return None + fent = fip.add_entry(entry._fip_type or entry._fip_uuid, entry_data, + entry._fip_flags) + if fent: + entry._fip_entry = fent + data = fip.get_data() + return data + + def SetImagePos(self, image_pos): + """Override this function to set all the entry properties from FIP + + We can only do this once image_pos is known + + Args: + image_pos: Position of this entry in the image + """ + super().SetImagePos(image_pos) + + # Now update the entries with info from the FIP entries + for entry in self._entries.values(): + fent = entry._fip_entry + entry.size = fent.size + entry.offset = fent.offset + entry.image_pos = self.image_pos + entry.offset + + def ReadChildData(self, child, decomp=True, alt_format=None): + if not self.reader: + self.fip_data = super().ReadData(True) + self.reader = FipReader(self.fip_data) + reader = self.reader + + # It is tricky to obtain the data from a FIP entry since it is indexed + # by its UUID. + fent = reader.get_entry(child._fip_type or child._fip_uuid) + return fent.data + + # Note: + # It is also possible to extract it using the offsets directly, but this + # seems less FIP_friendly: + # return self.fip_data[child.offset:child.offset + child.size] + + def WriteChildData(self, child): + # Recreate the data structure, leaving the data for this child alone, + # so that child.data is used to pack into the FIP. + self.ObtainContents(skip_entry=child) + return True diff --git a/tools/binman/etype/blob.py b/tools/binman/etype/blob.py index fae86ca..8c1b809 100644 --- a/tools/binman/etype/blob.py +++ b/tools/binman/etype/blob.py @@ -48,10 +48,10 @@ class Entry_blob(Entry): self.ReadBlobContents() return True - def ReadBlobContents(self): + def ReadFileContents(self, pathname): """Read blob contents into memory - This function compresses the data before storing if needed. + This function compresses the data before returning if needed. We assume the data is small enough to fit into memory. If this is used for large filesystem image that might not be true. @@ -59,13 +59,23 @@ class Entry_blob(Entry): new Entry method which can read in chunks. Then we could copy the data in chunks and avoid reading it all at once. For now this seems like an unnecessary complication. + + Args: + pathname (str): Pathname to read from + + Returns: + bytes: Data read """ state.TimingStart('read') - indata = tools.ReadFile(self._pathname) + indata = tools.ReadFile(pathname) state.TimingAccum('read') state.TimingStart('compress') data = self.CompressData(indata) state.TimingAccum('compress') + return data + + def ReadBlobContents(self): + data = self.ReadFileContents(self._pathname) self.SetContents(data) return True diff --git a/tools/binman/etype/blob_ext_list.py b/tools/binman/etype/blob_ext_list.py new file mode 100644 index 0000000..136ae81 --- /dev/null +++ b/tools/binman/etype/blob_ext_list.py @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2016 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for a list of external blobs, not built by U-Boot +# + +import os + +from binman.etype.blob import Entry_blob +from dtoc import fdt_util +from patman import tools +from patman import tout + +class Entry_blob_ext_list(Entry_blob): + """List of externally built binary blobs + + This is like blob-ext except that a number of blobs can be provided, + typically with some sort of relationship, e.g. all are DDC parameters. + + If any of the external files needed by this llist is missing, binman can + optionally ignore it and produce a broken image with a warning. + + Args: + filenames: List of filenames to read and include + """ + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + self.external = True + + def ReadNode(self): + super().ReadNode() + self._filenames = fdt_util.GetStringList(self._node, 'filenames') + self._pathnames = [] + + def ObtainContents(self): + missing = False + pathnames = [] + for fname in self._filenames: + pathname = tools.GetInputFilename( + fname, self.external and self.section.GetAllowMissing()) + # Allow the file to be missing + if not pathname: + missing = True + pathnames.append(pathname) + self._pathnames = pathnames + + if missing: + self.SetContents(b'') + self.missing = True + return True + + data = bytearray() + for pathname in pathnames: + data += self.ReadFileContents(pathname) + + self.SetContents(data) + return True diff --git a/tools/binman/etype/blob_phase.py b/tools/binman/etype/blob_phase.py index 54ca54c..ed25e46 100644 --- a/tools/binman/etype/blob_phase.py +++ b/tools/binman/etype/blob_phase.py @@ -48,4 +48,4 @@ class Entry_blob_phase(Entry_section): subnode = state.AddSubnode(self._node, name) # Read entries again, now that we have some - self._ReadEntries() + self.ReadEntries() diff --git a/tools/binman/etype/cbfs.py b/tools/binman/etype/cbfs.py index 44db7b9..cc1fbdf 100644 --- a/tools/binman/etype/cbfs.py +++ b/tools/binman/etype/cbfs.py @@ -168,43 +168,17 @@ class Entry_cbfs(Entry): from binman import state super().__init__(section, etype, node) - self._cbfs_arg = fdt_util.GetString(node, 'cbfs-arch', 'x86') self.align_default = None - self._cbfs_entries = OrderedDict() - self._ReadSubnodes() + self._entries = OrderedDict() self.reader = None - def ObtainContents(self, skip=None): - arch = cbfs_util.find_arch(self._cbfs_arg) - if arch is None: - self.Raise("Invalid architecture '%s'" % self._cbfs_arg) - if self.size is None: - self.Raise("'cbfs' entry must have a size property") - cbfs = CbfsWriter(self.size, arch) - for entry in self._cbfs_entries.values(): - # First get the input data and put it in a file. If not available, - # try later. - if entry != skip and not entry.ObtainContents(): - return False - data = entry.GetData() - cfile = None - if entry._type == 'raw': - cfile = cbfs.add_file_raw(entry._cbfs_name, data, - entry._cbfs_offset, - entry._cbfs_compress) - elif entry._type == 'stage': - cfile = cbfs.add_file_stage(entry._cbfs_name, data, - entry._cbfs_offset) - else: - entry.Raise("Unknown cbfs-type '%s' (use 'raw', 'stage')" % - entry._type) - if cfile: - entry._cbfs_file = cfile - data = cbfs.get_data() - self.SetContents(data) - return True + def ReadNode(self): + """Read properties from the atf-fip node""" + super().ReadNode() + self._cbfs_arg = fdt_util.GetString(self._node, 'cbfs-arch', 'x86') + self.ReadEntries() - def _ReadSubnodes(self): + def ReadEntries(self): """Read the subnodes to find out what should go in this CBFS""" for node in self._node.subnodes: entry = Entry.Create(self, node) @@ -217,7 +191,41 @@ class Entry_cbfs(Entry): if entry._cbfs_compress is None: self.Raise("Invalid compression in '%s': '%s'" % (node.name, compress)) - self._cbfs_entries[entry._cbfs_name] = entry + self._entries[entry._cbfs_name] = entry + + def ObtainCfile(self, cbfs, entry): + # First get the input data and put it in a file. If not available, + # try later. + data = entry.GetData() + cfile = None + if entry._type == 'raw': + cfile = cbfs.add_file_raw(entry._cbfs_name, data, + entry._cbfs_offset, + entry._cbfs_compress) + elif entry._type == 'stage': + cfile = cbfs.add_file_stage(entry._cbfs_name, data, + entry._cbfs_offset) + else: + entry.Raise("Unknown cbfs-type '%s' (use 'raw', 'stage')" % + entry._type) + return cfile + + def ObtainContents(self, skip_entry=None): + arch = cbfs_util.find_arch(self._cbfs_arg) + if arch is None: + self.Raise("Invalid architecture '%s'" % self._cbfs_arg) + if self.size is None: + self.Raise("'cbfs' entry must have a size property") + cbfs = CbfsWriter(self.size, arch) + for entry in self._entries.values(): + if entry != skip_entry and not entry.ObtainContents(): + return False + cfile = self.ObtainCfile(cbfs, entry) + if cfile: + entry._cbfs_file = cfile + data = cbfs.get_data() + self.SetContents(data) + return True def SetImagePos(self, image_pos): """Override this function to set all the entry properties from CBFS @@ -230,7 +238,7 @@ class Entry_cbfs(Entry): super().SetImagePos(image_pos) # Now update the entries with info from the CBFS entries - for entry in self._cbfs_entries.values(): + for entry in self._entries.values(): cfile = entry._cbfs_file entry.size = cfile.data_len entry.offset = cfile.calced_cbfs_offset @@ -240,7 +248,7 @@ class Entry_cbfs(Entry): def AddMissingProperties(self, have_image_pos): super().AddMissingProperties(have_image_pos) - for entry in self._cbfs_entries.values(): + for entry in self._entries.values(): entry.AddMissingProperties(have_image_pos) if entry._cbfs_compress: state.AddZeroProp(entry._node, 'uncomp-size') @@ -252,7 +260,7 @@ class Entry_cbfs(Entry): def SetCalculatedProperties(self): """Set the value of device-tree properties calculated by binman""" super().SetCalculatedProperties() - for entry in self._cbfs_entries.values(): + for entry in self._entries.values(): state.SetInt(entry._node, 'offset', entry.offset) state.SetInt(entry._node, 'size', entry.size) state.SetInt(entry._node, 'image-pos', entry.image_pos) @@ -262,24 +270,26 @@ class Entry_cbfs(Entry): def ListEntries(self, entries, indent): """Override this method to list all files in the section""" super().ListEntries(entries, indent) - for entry in self._cbfs_entries.values(): + for entry in self._entries.values(): entry.ListEntries(entries, indent + 1) def GetEntries(self): - return self._cbfs_entries + return self._entries - def ReadData(self, decomp=True): - data = super().ReadData(True) + def ReadData(self, decomp=True, alt_format=None): + data = super().ReadData(True, alt_format) return data - def ReadChildData(self, child, decomp=True): + def ReadChildData(self, child, decomp=True, alt_format=None): if not self.reader: - data = super().ReadData(True) + data = super().ReadData(True, alt_format) self.reader = cbfs_util.CbfsReader(data) reader = self.reader cfile = reader.files.get(child.name) return cfile.data if decomp else cfile.orig_data def WriteChildData(self, child): - self.ObtainContents(skip=child) + # Recreate the data structure, leaving the data for this child alone, + # so that child.data is used to pack into the FIP. + self.ObtainContents(skip_entry=child) return True diff --git a/tools/binman/etype/fdtmap.py b/tools/binman/etype/fdtmap.py index 2339fee..aaaf2de 100644 --- a/tools/binman/etype/fdtmap.py +++ b/tools/binman/etype/fdtmap.py @@ -74,6 +74,10 @@ class Entry_fdtmap(Entry): If allow-repack is used then 'orig-offset' and 'orig-size' properties are added as necessary. See the binman README. + + When extracting files, an alternative 'fdt' format is available for fdtmaps. + Use `binman extract -F fdt ...` to use this. It will export a devicetree, + without the fdtmap header, so it can be viewed with `fdtdump`. """ def __init__(self, section, etype, node): # Put these here to allow entry-docs and help to work without libfdt @@ -86,6 +90,10 @@ class Entry_fdtmap(Entry): from dtoc.fdt import Fdt super().__init__(section, etype, node) + self.alt_formats = ['fdt'] + + def CheckAltFormats(self, alt_formats): + alt_formats['fdt'] = self, 'Extract the devicetree blob from the fdtmap' def _GetFdtmap(self): """Build an FDT map from the entries in the current image @@ -147,3 +155,7 @@ class Entry_fdtmap(Entry): processing, e.g. the image-pos properties. """ return self.ProcessContentsUpdate(self._GetFdtmap()) + + def GetAltFormat(self, data, alt_format): + if alt_format == 'fdt': + return data[FDTMAP_HDR_LEN:] diff --git a/tools/binman/etype/files.py b/tools/binman/etype/files.py index 9b04a49..927d0f0 100644 --- a/tools/binman/etype/files.py +++ b/tools/binman/etype/files.py @@ -64,4 +64,4 @@ class Entry_files(Entry_section): state.AddInt(subnode, 'align', self._files_align) # Read entries again, now that we have some - self._ReadEntries() + self.ReadEntries() diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py index 6936f57..b41187d 100644 --- a/tools/binman/etype/fit.py +++ b/tools/binman/etype/fit.py @@ -136,10 +136,10 @@ class Entry_fit(Entry): str)])[0] def ReadNode(self): - self._ReadSubnodes() + self.ReadEntries() super().ReadNode() - def _ReadSubnodes(self): + def ReadEntries(self): def _AddNode(base_node, depth, node): """Add a node to the FIT diff --git a/tools/binman/etype/intel_ifwi.py b/tools/binman/etype/intel_ifwi.py index 903d39b..ecbd78d 100644 --- a/tools/binman/etype/intel_ifwi.py +++ b/tools/binman/etype/intel_ifwi.py @@ -50,7 +50,7 @@ class Entry_intel_ifwi(Entry_blob_ext): self._ifwi_entries = OrderedDict() def ReadNode(self): - self._ReadSubnodes() + self.ReadEntries() super().ReadNode() def _BuildIfwi(self): @@ -117,7 +117,7 @@ class Entry_intel_ifwi(Entry_blob_ext): same = orig_data == self.data return same - def _ReadSubnodes(self): + def ReadEntries(self): """Read the subnodes to find out what should go in this IFWI""" for node in self._node.subnodes: entry = Entry.Create(self.section, node) diff --git a/tools/binman/etype/mkimage.py b/tools/binman/etype/mkimage.py index e499775..c08fd9d 100644 --- a/tools/binman/etype/mkimage.py +++ b/tools/binman/etype/mkimage.py @@ -37,7 +37,7 @@ class Entry_mkimage(Entry): self._args = fdt_util.GetString(self._node, 'args').split(' ') self._mkimage_entries = OrderedDict() self.align_default = None - self._ReadSubnodes() + self.ReadEntries() def ObtainContents(self): data = b'' @@ -55,7 +55,7 @@ class Entry_mkimage(Entry): self.SetContents(tools.ReadFile(output_fname)) return True - def _ReadSubnodes(self): + def ReadEntries(self): """Read the subnodes to find out what should go in this image""" for node in self._node.subnodes: entry = Entry.Create(self, node) diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py index e2949fc..43436a1 100644 --- a/tools/binman/etype/section.py +++ b/tools/binman/etype/section.py @@ -24,34 +24,135 @@ from patman.tools import ToHexSize class Entry_section(Entry): """Entry that contains other entries - Properties / Entry arguments: (see binman README for more information): - pad-byte: Pad byte to use when padding - sort-by-offset: True if entries should be sorted by offset, False if - they must be in-order in the device tree description - - end-at-4gb: Used to build an x86 ROM which ends at 4GB (2^32) - - skip-at-start: Number of bytes before the first entry starts. These - effectively adjust the starting offset of entries. For example, - if this is 16, then the first entry would start at 16. An entry - with offset = 20 would in fact be written at offset 4 in the image - file, since the first 16 bytes are skipped when writing. - name-prefix: Adds a prefix to the name of every entry in the section - when writing out the map - align_default: Default alignment for this section, if no alignment is - given in the entry - - Properties: - allow_missing: True if this section permits external blobs to be - missing their contents. The second will produce an image but of - course it will not work. + A section is an entry which can contain other entries, thus allowing + hierarchical images to be created. See 'Sections and hierarchical images' + in the binman README for more information. + + The base implementation simply joins the various entries together, using + various rules about alignment, etc. + + Subclassing + ~~~~~~~~~~~ + + This class can be subclassed to support other file formats which hold + multiple entries, such as CBFS. To do this, override the following + functions. The documentation here describes what your function should do. + For example code, see etypes which subclass `Entry_section`, or `cbfs.py` + for a more involved example:: + + $ grep -l \(Entry_section tools/binman/etype/*.py + + ReadNode() + Call `super().ReadNode()`, then read any special properties for the + section. Then call `self.ReadEntries()` to read the entries. + + Binman calls this at the start when reading the image description. + + ReadEntries() + Read in the subnodes of the section. This may involve creating entries + of a particular etype automatically, as well as reading any special + properties in the entries. For each entry, entry.ReadNode() should be + called, to read the basic entry properties. The properties should be + added to `self._entries[]`, in the correct order, with a suitable name. + + Binman calls this at the start when reading the image description. + + BuildSectionData(required) + Create the custom file format that you want and return it as bytes. + This likely sets up a file header, then loops through the entries, + adding them to the file. For each entry, call `entry.GetData()` to + obtain the data. If that returns None, and `required` is False, then + this method must give up and return None. But if `required` is True then + it should assume that all data is valid. + + Binman calls this when packing the image, to find out the size of + everything. It is called again at the end when building the final image. + + SetImagePos(image_pos): + Call `super().SetImagePos(image_pos)`, then set the `image_pos` values + for each of the entries. This should use the custom file format to find + the `start offset` (and `image_pos`) of each entry. If the file format + uses compression in such a way that there is no offset available (other + than reading the whole file and decompressing it), then the offsets for + affected entries can remain unset (`None`). The size should also be set + if possible. + + Binman calls this after the image has been packed, to update the + location that all the entries ended up at. + + ReadChildData(child, decomp, alt_format): + The default version of this may be good enough, if you are able to + implement SetImagePos() correctly. But that is a bit of a bypass, so + you can override this method to read from your custom file format. It + should read the entire entry containing the custom file using + `super().ReadData(True)`, then parse the file to get the data for the + given child, then return that data. + + If your file format supports compression, the `decomp` argument tells + you whether to return the compressed data (`decomp` is False) or to + uncompress it first, then return the uncompressed data (`decomp` is + True). This is used by the `binman extract -U` option. + + If your entry supports alternative formats, the alt_format provides the + alternative format that the user has selected. Your function should + return data in that format. This is used by the 'binman extract -l' + option. + + Binman calls this when reading in an image, in order to populate all the + entries with the data from that image (`binman ls`). + + WriteChildData(child): + Binman calls this after `child.data` is updated, to inform the custom + file format about this, in case it needs to do updates. + + The default version of this does nothing and probably needs to be + overridden for the 'binman replace' command to work. Your version should + use `child.data` to update the data for that child in the custom file + format. + + Binman calls this when updating an image that has been read in and in + particular to update the data for a particular entry (`binman replace`) + + Properties / Entry arguments + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + See :ref:`develop/package/binman:Image description format` for more + information. + + align-default + Default alignment for this section, if no alignment is given in the + entry + + pad-byte + Pad byte to use when padding + + sort-by-offset + True if entries should be sorted by offset, False if they must be + in-order in the device tree description + + end-at-4gb + Used to build an x86 ROM which ends at 4GB (2^32) + + name-prefix + Adds a prefix to the name of every entry in the section when writing out + the map + + skip-at-start + Number of bytes before the first entry starts. These effectively adjust + the starting offset of entries. For example, if this is 16, then the + first entry would start at 16. An entry with offset = 20 would in fact + be written at offset 4 in the image file, since the first 16 bytes are + skipped when writing. Since a section is also an entry, it inherits all the properies of entries too. - A section is an entry which can contain other entries, thus allowing - hierarchical images to be created. See 'Sections and hierarchical images' - in the binman README for more information. + Note that the `allow_missing` member controls whether this section permits + external blobs to be missing their contents. The option will produce an + image but of course it will not work. It is useful to make sure that + Continuous Integration systems can build without the binaries being + available. This is set by the `SetAllowMissing()` method, if + `--allow-missing` is passed to binman. """ def __init__(self, section, etype, node, test=False): if not test: @@ -81,18 +182,16 @@ class Entry_section(Entry): self._skip_at_start = 0 self._name_prefix = fdt_util.GetString(self._node, 'name-prefix') self.align_default = fdt_util.GetInt(self._node, 'align-default', 0) - filename = fdt_util.GetString(self._node, 'filename') - if filename: - self._filename = filename - self._ReadEntries() + self.ReadEntries() - def _ReadEntries(self): + def ReadEntries(self): for node in self._node.subnodes: if node.name.startswith('hash') or node.name.startswith('signature'): continue entry = Entry.Create(self, node, - expanded=self.GetImage().use_expanded) + expanded=self.GetImage().use_expanded, + missing_etype=self.GetImage().missing_etype) entry.ReadNode() entry.SetPrefix(self._name_prefix) self._entries[node.name] = entry @@ -101,9 +200,9 @@ class Entry_section(Entry): """Raises an error for this section Args: - msg: Error message to use in the raise string + msg (str): Error message to use in the raise string Raises: - ValueError() + ValueError: always """ raise ValueError("Section '%s': %s" % (self._node.path, msg)) @@ -146,8 +245,8 @@ class Entry_section(Entry): for entry in self._entries.values(): entry.AddMissingProperties(have_image_pos) - def ObtainContents(self): - return self.GetEntryContents() + def ObtainContents(self, skip_entry=None): + return self.GetEntryContents(skip_entry=skip_entry) def GetPaddedDataForEntry(self, entry, entry_data): """Get the data for an entry including any padding @@ -185,7 +284,7 @@ class Entry_section(Entry): return data - def _BuildSectionData(self, required): + def BuildSectionData(self, required): """Build the contents of a section This places all entries at the right place, dealing with padding before @@ -193,6 +292,9 @@ class Entry_section(Entry): pad-before and pad-after properties in the section items) since that is handled by the parent section. + This should be overridden by subclasses which want to build their own + data structure for the section. + Args: required: True if the data must be present, False if it is OK to return None @@ -204,6 +306,9 @@ class Entry_section(Entry): for entry in self._entries.values(): entry_data = entry.GetData(required) + + # This can happen when this section is referenced from a collection + # earlier in the image description. See testCollectionSection(). if not required and entry_data is None: return None data = self.GetPaddedDataForEntry(entry, entry_data) @@ -253,7 +358,7 @@ class Entry_section(Entry): This excludes any padding. If the section is compressed, the compressed data is returned """ - data = self._BuildSectionData(required) + data = self.BuildSectionData(required) if data is None: return None self.SetContents(data) @@ -281,7 +386,7 @@ class Entry_section(Entry): self._SortEntries() self._ExpandEntries() - data = self._BuildSectionData(True) + data = self.BuildSectionData(True) self.SetContents(data) self.CheckSize() @@ -524,12 +629,13 @@ class Entry_section(Entry): return entry return None - def GetEntryContents(self): + def GetEntryContents(self, skip_entry=None): """Call ObtainContents() for each entry in the section """ def _CheckDone(entry): - if not entry.ObtainContents(): - next_todo.append(entry) + if entry != skip_entry: + if not entry.ObtainContents(): + next_todo.append(entry) return entry todo = self._entries.values() @@ -617,7 +723,7 @@ class Entry_section(Entry): def ListEntries(self, entries, indent): """List the files in the section""" - Entry.AddEntryInfo(entries, indent, self.name, 'section', self.size, + Entry.AddEntryInfo(entries, indent, self.name, self.etype, self.size, self.image_pos, None, self.offset, self) for entry in self._entries.values(): entry.ListEntries(entries, indent + 1) @@ -649,9 +755,9 @@ class Entry_section(Entry): """ return self._sort - def ReadData(self, decomp=True): + def ReadData(self, decomp=True, alt_format=None): tout.Info("ReadData path='%s'" % self.GetPath()) - parent_data = self.section.ReadData(True) + parent_data = self.section.ReadData(True, alt_format) offset = self.offset - self.section._skip_at_start data = parent_data[offset:offset + self.size] tout.Info( @@ -660,9 +766,9 @@ class Entry_section(Entry): self.size, len(data))) return data - def ReadChildData(self, child, decomp=True): - tout.Debug("ReadChildData for child '%s'" % child.GetPath()) - parent_data = self.ReadData(True) + def ReadChildData(self, child, decomp=True, alt_format=None): + tout.Debug(f"ReadChildData for child '{child.GetPath()}'") + parent_data = self.ReadData(True, alt_format) offset = child.offset - self._skip_at_start tout.Debug("Extract for child '%s': offset %#x, skip_at_start %#x, result %#x" % (child.GetPath(), child.offset, self._skip_at_start, offset)) @@ -674,6 +780,10 @@ class Entry_section(Entry): tout.Info("%s: Decompressing data size %#x with algo '%s' to data size %#x" % (child.GetPath(), len(indata), child.compress, len(data))) + if alt_format: + new_data = child.GetAltFormat(data, alt_format) + if new_data is not None: + data = new_data return data def WriteChildData(self, child): @@ -738,8 +848,14 @@ class Entry_section(Entry): nothing. Args: - missing: List of missing properties / entry args, each a string + entry (Entry): Entry to raise the error on + missing (list of str): List of missing properties / entry args, each + a string """ if not self._ignore_missing: - entry.Raise('Missing required properties/entry args: %s' % - (', '.join(missing))) + missing = ', '.join(missing) + entry.Raise(f'Missing required properties/entry args: {missing}') + + def CheckAltFormats(self, alt_formats): + for entry in self._entries.values(): + entry.CheckAltFormats(alt_formats) diff --git a/tools/binman/fip_util.py b/tools/binman/fip_util.py new file mode 100755 index 0000000..5f7dbc0 --- /dev/null +++ b/tools/binman/fip_util.py @@ -0,0 +1,653 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2021 Google LLC +# Written by Simon Glass <sjg@chromium.org> + +"""Support for ARM's Firmware Image Package (FIP) format + +FIP is a format similar to FMAP[1] but with fewer features and an obscure UUID +instead of the region name. + +It consists of a header and a table of entries, each pointing to a place in the +firmware image where something can be found. + +[1] https://chromium.googlesource.com/chromiumos/third_party/flashmap/+/refs/heads/master/lib/fmap.h + +If ATF updates, run this program to update the FIT_TYPE_LIST. + +ARM Trusted Firmware is available at: + +https://github.com/ARM-software/arm-trusted-firmware.git +""" + +from argparse import ArgumentParser +import collections +import io +import os +import re +import struct +import sys +from uuid import UUID + +OUR_FILE = os.path.realpath(__file__) +OUR_PATH = os.path.dirname(OUR_FILE) + +# Bring in the patman and dtoc libraries (but don't override the first path +# in PYTHONPATH) +sys.path.insert(2, os.path.join(OUR_PATH, '..')) + +# pylint: disable=C0413 +from patman import command +from patman import tools + +# The TOC header, at the start of the FIP +HEADER_FORMAT = '<IIQ' +HEADER_LEN = 0x10 +HEADER_MAGIC = 0xaA640001 +HEADER_SERIAL = 0x12345678 + +# The entry header (a table of these comes after the TOC header) +UUID_LEN = 16 +ENTRY_FORMAT = f'<{UUID_LEN}sQQQ' +ENTRY_SIZE = 0x28 + +HEADER_NAMES = ( + 'name', + 'serial', + 'flags', +) + +ENTRY_NAMES = ( + 'uuid', + 'offset', + 'size', + 'flags', +) + +# Set to True to enable output from running fiptool for debugging +VERBOSE = False + +# Use a class so we can convert the bytes, making the table more readable +# pylint: disable=R0903 +class FipType: + """A FIP entry type that we understand""" + def __init__(self, name, desc, uuid_bytes): + """Create up a new type + + Args: + name (str): Short name for the type + desc (str): Longer description for the type + uuid_bytes (bytes): List of 16 bytes for the UUID + """ + self.name = name + self.desc = desc + self.uuid = bytes(uuid_bytes) + +# This is taken from tbbr_config.c in ARM Trusted Firmware +FIP_TYPE_LIST = [ + # ToC Entry UUIDs + FipType('scp-fwu-cfg', 'SCP Firmware Updater Configuration FWU SCP_BL2U', + [0x65, 0x92, 0x27, 0x03, 0x2f, 0x74, 0xe6, 0x44, + 0x8d, 0xff, 0x57, 0x9a, 0xc1, 0xff, 0x06, 0x10]), + FipType('ap-fwu-cfg', 'AP Firmware Updater Configuration BL2U', + [0x60, 0xb3, 0xeb, 0x37, 0xc1, 0xe5, 0xea, 0x41, + 0x9d, 0xf3, 0x19, 0xed, 0xa1, 0x1f, 0x68, 0x01]), + FipType('fwu', 'Firmware Updater NS_BL2U', + [0x4f, 0x51, 0x1d, 0x11, 0x2b, 0xe5, 0x4e, 0x49, + 0xb4, 0xc5, 0x83, 0xc2, 0xf7, 0x15, 0x84, 0x0a]), + FipType('fwu-cert', 'Non-Trusted Firmware Updater certificate', + [0x71, 0x40, 0x8a, 0xb2, 0x18, 0xd6, 0x87, 0x4c, + 0x8b, 0x2e, 0xc6, 0xdc, 0xcd, 0x50, 0xf0, 0x96]), + FipType('tb-fw', 'Trusted Boot Firmware BL2', + [0x5f, 0xf9, 0xec, 0x0b, 0x4d, 0x22, 0x3e, 0x4d, + 0xa5, 0x44, 0xc3, 0x9d, 0x81, 0xc7, 0x3f, 0x0a]), + FipType('scp-fw', 'SCP Firmware SCP_BL2', + [0x97, 0x66, 0xfd, 0x3d, 0x89, 0xbe, 0xe8, 0x49, + 0xae, 0x5d, 0x78, 0xa1, 0x40, 0x60, 0x82, 0x13]), + FipType('soc-fw', 'EL3 Runtime Firmware BL31', + [0x47, 0xd4, 0x08, 0x6d, 0x4c, 0xfe, 0x98, 0x46, + 0x9b, 0x95, 0x29, 0x50, 0xcb, 0xbd, 0x5a, 0x00]), + FipType('tos-fw', 'Secure Payload BL32 (Trusted OS)', + [0x05, 0xd0, 0xe1, 0x89, 0x53, 0xdc, 0x13, 0x47, + 0x8d, 0x2b, 0x50, 0x0a, 0x4b, 0x7a, 0x3e, 0x38]), + FipType('tos-fw-extra1', 'Secure Payload BL32 Extra1 (Trusted OS Extra1)', + [0x0b, 0x70, 0xc2, 0x9b, 0x2a, 0x5a, 0x78, 0x40, + 0x9f, 0x65, 0x0a, 0x56, 0x82, 0x73, 0x82, 0x88]), + FipType('tos-fw-extra2', 'Secure Payload BL32 Extra2 (Trusted OS Extra2)', + [0x8e, 0xa8, 0x7b, 0xb1, 0xcf, 0xa2, 0x3f, 0x4d, + 0x85, 0xfd, 0xe7, 0xbb, 0xa5, 0x02, 0x20, 0xd9]), + FipType('nt-fw', 'Non-Trusted Firmware BL33', + [0xd6, 0xd0, 0xee, 0xa7, 0xfc, 0xea, 0xd5, 0x4b, + 0x97, 0x82, 0x99, 0x34, 0xf2, 0x34, 0xb6, 0xe4]), + FipType('rmm-fw', 'Realm Monitor Management Firmware', + [0x6c, 0x07, 0x62, 0xa6, 0x12, 0xf2, 0x4b, 0x56, + 0x92, 0xcb, 0xba, 0x8f, 0x63, 0x36, 0x06, 0xd9]), + # Key certificates + FipType('rot-cert', 'Root Of Trust key certificate', + [0x86, 0x2d, 0x1d, 0x72, 0xf8, 0x60, 0xe4, 0x11, + 0x92, 0x0b, 0x8b, 0xe7, 0x62, 0x16, 0x0f, 0x24]), + FipType('trusted-key-cert', 'Trusted key certificate', + [0x82, 0x7e, 0xe8, 0x90, 0xf8, 0x60, 0xe4, 0x11, + 0xa1, 0xb4, 0x77, 0x7a, 0x21, 0xb4, 0xf9, 0x4c]), + FipType('scp-fw-key-cert', 'SCP Firmware key certificate', + [0x02, 0x42, 0x21, 0xa1, 0xf8, 0x60, 0xe4, 0x11, + 0x8d, 0x9b, 0xf3, 0x3c, 0x0e, 0x15, 0xa0, 0x14]), + FipType('soc-fw-key-cert', 'SoC Firmware key certificate', + [0x8a, 0xb8, 0xbe, 0xcc, 0xf9, 0x60, 0xe4, 0x11, + 0x9a, 0xd0, 0xeb, 0x48, 0x22, 0xd8, 0xdc, 0xf8]), + FipType('tos-fw-key-cert', 'Trusted OS Firmware key certificate', + [0x94, 0x77, 0xd6, 0x03, 0xfb, 0x60, 0xe4, 0x11, + 0x85, 0xdd, 0xb7, 0x10, 0x5b, 0x8c, 0xee, 0x04]), + FipType('nt-fw-key-cert', 'Non-Trusted Firmware key certificate', + [0x8a, 0xd5, 0x83, 0x2a, 0xfb, 0x60, 0xe4, 0x11, + 0x8a, 0xaf, 0xdf, 0x30, 0xbb, 0xc4, 0x98, 0x59]), + # Content certificates + FipType('tb-fw-cert', 'Trusted Boot Firmware BL2 certificate', + [0xd6, 0xe2, 0x69, 0xea, 0x5d, 0x63, 0xe4, 0x11, + 0x8d, 0x8c, 0x9f, 0xba, 0xbe, 0x99, 0x56, 0xa5]), + FipType('scp-fw-cert', 'SCP Firmware content certificate', + [0x44, 0xbe, 0x6f, 0x04, 0x5e, 0x63, 0xe4, 0x11, + 0xb2, 0x8b, 0x73, 0xd8, 0xea, 0xae, 0x96, 0x56]), + FipType('soc-fw-cert', 'SoC Firmware content certificate', + [0xe2, 0xb2, 0x0c, 0x20, 0x5e, 0x63, 0xe4, 0x11, + 0x9c, 0xe8, 0xab, 0xcc, 0xf9, 0x2b, 0xb6, 0x66]), + FipType('tos-fw-cert', 'Trusted OS Firmware content certificate', + [0xa4, 0x9f, 0x44, 0x11, 0x5e, 0x63, 0xe4, 0x11, + 0x87, 0x28, 0x3f, 0x05, 0x72, 0x2a, 0xf3, 0x3d]), + FipType('nt-fw-cert', 'Non-Trusted Firmware content certificate', + [0x8e, 0xc4, 0xc1, 0xf3, 0x5d, 0x63, 0xe4, 0x11, + 0xa7, 0xa9, 0x87, 0xee, 0x40, 0xb2, 0x3f, 0xa7]), + FipType('sip-sp-cert', 'SiP owned Secure Partition content certificate', + [0x77, 0x6d, 0xfd, 0x44, 0x86, 0x97, 0x4c, 0x3b, + 0x91, 0xeb, 0xc1, 0x3e, 0x02, 0x5a, 0x2a, 0x6f]), + FipType('plat-sp-cert', 'Platform owned Secure Partition content certificate', + [0xdd, 0xcb, 0xbf, 0x4a, 0xca, 0xd6, 0x11, 0xea, + 0x87, 0xd0, 0x02, 0x42, 0xac, 0x13, 0x00, 0x03]), + # Dynamic configs + FipType('hw-config', 'HW_CONFIG', + [0x08, 0xb8, 0xf1, 0xd9, 0xc9, 0xcf, 0x93, 0x49, + 0xa9, 0x62, 0x6f, 0xbc, 0x6b, 0x72, 0x65, 0xcc]), + FipType('tb-fw-config', 'TB_FW_CONFIG', + [0x6c, 0x04, 0x58, 0xff, 0xaf, 0x6b, 0x7d, 0x4f, + 0x82, 0xed, 0xaa, 0x27, 0xbc, 0x69, 0xbf, 0xd2]), + FipType('soc-fw-config', 'SOC_FW_CONFIG', + [0x99, 0x79, 0x81, 0x4b, 0x03, 0x76, 0xfb, 0x46, + 0x8c, 0x8e, 0x8d, 0x26, 0x7f, 0x78, 0x59, 0xe0]), + FipType('tos-fw-config', 'TOS_FW_CONFIG', + [0x26, 0x25, 0x7c, 0x1a, 0xdb, 0xc6, 0x7f, 0x47, + 0x8d, 0x96, 0xc4, 0xc4, 0xb0, 0x24, 0x80, 0x21]), + FipType('nt-fw-config', 'NT_FW_CONFIG', + [0x28, 0xda, 0x98, 0x15, 0x93, 0xe8, 0x7e, 0x44, + 0xac, 0x66, 0x1a, 0xaf, 0x80, 0x15, 0x50, 0xf9]), + FipType('fw-config', 'FW_CONFIG', + [0x58, 0x07, 0xe1, 0x6a, 0x84, 0x59, 0x47, 0xbe, + 0x8e, 0xd5, 0x64, 0x8e, 0x8d, 0xdd, 0xab, 0x0e]), + ] # end + +FIP_TYPES = {ftype.name: ftype for ftype in FIP_TYPE_LIST} + + +def get_type_uuid(fip_type_or_uuid): + """get_type_uuid() - Convert a type or uuid into both + + This always returns a UUID, but may not return a type since it does not do + the reverse lookup. + + Args: + fip_type_or_uuid (str or bytes): Either a string containing the name of + an entry (e.g. 'soc-fw') or a bytes(16) containing the UUID + + Returns: + tuple: + str: fip type (None if not known) + bytes(16): uuid + + Raises: + ValueError: An unknown type was requested + """ + if isinstance(fip_type_or_uuid, str): + fip_type = fip_type_or_uuid + lookup = FIP_TYPES.get(fip_type) + if not lookup: + raise ValueError(f"Unknown FIP entry type '{fip_type}'") + uuid = lookup.uuid + else: + fip_type = None + uuid = fip_type_or_uuid + return fip_type, uuid + + +# pylint: disable=R0903 +class FipHeader: + """Class to represent a FIP header""" + def __init__(self, name, serial, flags): + """Set up a new header object + + Args: + name (str): Name, i.e. HEADER_MAGIC + serial (str): Serial value, i.e. HEADER_SERIAL + flags (int64): Flags value + """ + self.name = name + self.serial = serial + self.flags = flags + + +# pylint: disable=R0903 +class FipEntry: + """Class to represent a single FIP entry + + This is used to hold the information about an entry, including its contents. + Use the get_data() method to obtain the raw output for writing to the FIP + file. + """ + def __init__(self, uuid, offset, size, flags): + self.uuid = uuid + self.offset = offset + self.size = size + self.flags = flags + self.fip_type = None + self.data = None + self.valid = uuid != tools.GetBytes(0, UUID_LEN) + if self.valid: + # Look up the friendly name + matches = {val for (key, val) in FIP_TYPES.items() + if val.uuid == uuid} + if len(matches) == 1: + self.fip_type = matches.pop().name + + @classmethod + def from_type(cls, fip_type_or_uuid, data, flags): + """Create a FipEntry from a type name + + Args: + cls (class): This class + fip_type_or_uuid (str or bytes): Name of the type to create, or + bytes(16) uuid + data (bytes): Contents of entry + flags (int64): Flags value + + Returns: + FipEntry: Created 241 + """ + fip_type, uuid = get_type_uuid(fip_type_or_uuid) + fent = FipEntry(uuid, None, len(data), flags) + fent.fip_type = fip_type + fent.data = data + return fent + + +def decode_fip(data): + """Decode a FIP into a header and list of FIP entries + + Args: + data (bytes): Data block containing the FMAP + + Returns: + Tuple: + header: FipHeader object + List of FipArea objects + """ + fields = list(struct.unpack(HEADER_FORMAT, data[:HEADER_LEN])) + header = FipHeader(*fields) + fents = [] + pos = HEADER_LEN + while True: + fields = list(struct.unpack(ENTRY_FORMAT, data[pos:pos + ENTRY_SIZE])) + fent = FipEntry(*fields) + if not fent.valid: + break + fent.data = data[fent.offset:fent.offset + fent.size] + fents.append(fent) + pos += ENTRY_SIZE + return header, fents + + +class FipWriter: + """Class to handle writing a ARM Trusted Firmware's Firmware Image Package + + Usage is something like: + + fip = FipWriter(size) + fip.add_entry('scp-fwu-cfg', tools.ReadFile('something.bin')) + ... + data = cbw.get_data() + + Attributes: + """ + def __init__(self, flags, align): + self._fip_entries = [] + self._flags = flags + self._align = align + + def add_entry(self, fip_type, data, flags): + """Add a new entry to the FIP + + Args: + fip_type (str): Type to add, e.g. 'tos-fw-config' + data (bytes): Contents of entry + flags (int64): Entry flags + + Returns: + FipEntry: entry that was added + """ + fent = FipEntry.from_type(fip_type, data, flags) + self._fip_entries.append(fent) + return fent + + def get_data(self): + """Obtain the full contents of the FIP + + Thhis builds the FIP with headers and all required FIP entries. + + Returns: + bytes: data resulting from building the FIP + """ + buf = io.BytesIO() + hdr = struct.pack(HEADER_FORMAT, HEADER_MAGIC, HEADER_SERIAL, + self._flags) + buf.write(hdr) + + # Calculate the position fo the first entry + offset = len(hdr) + offset += len(self._fip_entries) * ENTRY_SIZE + offset += ENTRY_SIZE # terminating entry + + for fent in self._fip_entries: + offset = tools.Align(offset, self._align) + fent.offset = offset + offset += fent.size + + # Write out the TOC + for fent in self._fip_entries: + hdr = struct.pack(ENTRY_FORMAT, fent.uuid, fent.offset, fent.size, + fent.flags) + buf.write(hdr) + + # Write out the entries + for fent in self._fip_entries: + buf.seek(fent.offset) + buf.write(fent.data) + + return buf.getvalue() + + +class FipReader(): + """Class to handle reading a Firmware Image Package (FIP) + + Usage is something like: + fip = fip_util.FipReader(data) + fent = fip.get_entry('fwu') + self.WriteFile('ufwu.bin', fent.data) + blob = fip.get_entry( + bytes([0xe3, 0xb7, 0x8d, 0x9e, 0x4a, 0x64, 0x11, 0xec, + 0xb4, 0x5c, 0xfb, 0xa2, 0xb9, 0xb4, 0x97, 0x88])) + self.WriteFile('blob.bin', blob.data) + """ + def __init__(self, data, read=True): + """Set up a new FitReader + + Args: + data (bytes): data to read + read (bool): True to read the data now + """ + self.fents = collections.OrderedDict() + self.data = data + if read: + self.read() + + def read(self): + """Read all the files in the FIP and add them to self.files""" + self.header, self.fents = decode_fip(self.data) + + def get_entry(self, fip_type_or_uuid): + """get_entry() - Find an entry by type or UUID + + Args: + fip_type_or_uuid (str or bytes): Name of the type to create, or + bytes(16) uuid + + Returns: + FipEntry: if found + + Raises: + ValueError: entry type not found + """ + fip_type, uuid = get_type_uuid(fip_type_or_uuid) + for fent in self.fents: + if fent.uuid == uuid: + return fent + label = fip_type + if not label: + label = UUID(bytes=uuid) + raise ValueError(f"Cannot find FIP entry '{label}'") + + +def parse_macros(srcdir): + """parse_macros: Parse the firmware_image_package.h file + + Args: + srcdir (str): 'arm-trusted-firmware' source directory + + Returns: + dict: + key: UUID macro name, e.g. 'UUID_TRUSTED_FWU_CERT' + value: list: + file comment, e.g. 'ToC Entry UUIDs' + macro name, e.g. 'UUID_TRUSTED_FWU_CERT' + uuid as bytes(16) + + Raises: + ValueError: a line cannot be parsed + """ + re_uuid = re.compile('0x[0-9a-fA-F]{2}') + re_comment = re.compile(r'^/\* (.*) \*/$') + fname = os.path.join(srcdir, 'include/tools_share/firmware_image_package.h') + data = tools.ReadFile(fname, binary=False) + macros = collections.OrderedDict() + comment = None + for linenum, line in enumerate(data.splitlines()): + if line.startswith('/*'): + mat = re_comment.match(line) + if mat: + comment = mat.group(1) + else: + # Example: #define UUID_TOS_FW_CONFIG \ + if 'UUID' in line: + macro = line.split()[1] + elif '{{' in line: + mat = re_uuid.findall(line) + if not mat or len(mat) != 16: + raise ValueError( + f'{fname}: Cannot parse UUID line {linenum + 1}: Got matches: {mat}') + + uuid = bytes([int(val, 16) for val in mat]) + macros[macro] = comment, macro, uuid + if not macros: + raise ValueError(f'{fname}: Cannot parse file') + return macros + + +def parse_names(srcdir): + """parse_names: Parse the tbbr_config.c file + + Args: + srcdir (str): 'arm-trusted-firmware' source directory + + Returns: + tuple: dict of entries: + key: UUID macro, e.g. 'UUID_NON_TRUSTED_FIRMWARE_BL33' + tuple: entry information + Description of entry, e.g. 'Non-Trusted Firmware BL33' + UUID macro, e.g. 'UUID_NON_TRUSTED_FIRMWARE_BL33' + Name of entry, e.g. 'nt-fw' + + Raises: + ValueError: the file cannot be parsed + """ + # Extract the .name, .uuid and .cmdline_name values + re_data = re.compile(r'\.name = "([^"]*)",\s*\.uuid = (UUID_\w*),\s*\.cmdline_name = "([^"]+)"', + re.S) + fname = os.path.join(srcdir, 'tools/fiptool/tbbr_config.c') + data = tools.ReadFile(fname, binary=False) + + # Example entry: + # { + # .name = "Secure Payload BL32 Extra2 (Trusted OS Extra2)", + # .uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA2, + # .cmdline_name = "tos-fw-extra2" + # }, + mat = re_data.findall(data) + if not mat: + raise ValueError(f'{fname}: Cannot parse file') + names = {uuid: (desc, uuid, name) for desc, uuid, name in mat} + return names + + +def create_code_output(macros, names): + """create_code_output() - Create the new version of this Python file + + Args: + macros (dict): + key (str): UUID macro name, e.g. 'UUID_TRUSTED_FWU_CERT' + value: list: + file comment, e.g. 'ToC Entry UUIDs' + macro name, e.g. 'UUID_TRUSTED_FWU_CERT' + uuid as bytes(16) + + names (dict): list of entries, each + tuple: entry information + Description of entry, e.g. 'Non-Trusted Firmware BL33' + UUID macro, e.g. 'UUID_NON_TRUSTED_FIRMWARE_BL33' + Name of entry, e.g. 'nt-fw' + + Returns: + str: Table of FipType() entries + """ + def _to_hex_list(data): + """Convert bytes into C code + + Args: + bytes to convert + + Returns: + str: in the format '0x12, 0x34, 0x56...' + """ + # Use 0x instead of %# since the latter ignores the 0 modifier in + # Python 3.8.10 + return ', '.join(['0x%02x' % byte for byte in data]) + + out = '' + last_comment = None + for comment, macro, uuid in macros.values(): + name_entry = names.get(macro) + if not name_entry: + print(f"Warning: UUID '{macro}' is not mentioned in tbbr_config.c file") + continue + desc, _, name = name_entry + if last_comment != comment: + out += f' # {comment}\n' + last_comment = comment + out += """ FipType('%s', '%s', + [%s, + %s]), +""" % (name, desc, _to_hex_list(uuid[:8]), _to_hex_list(uuid[8:])) + return out + + +def parse_atf_source(srcdir, dstfile, oldfile): + """parse_atf_source(): Parse the ATF source tree and update this file + + Args: + srcdir (str): Path to 'arm-trusted-firmware' directory. Get this from: + https://github.com/ARM-software/arm-trusted-firmware.git + dstfile (str): File to write new code to, if an update is needed + oldfile (str): Python source file to compare against + + Raises: + ValueError: srcdir readme.rst is missing or the first line does not + match what is expected + """ + # We expect a readme file + readme_fname = os.path.join(srcdir, 'readme.rst') + if not os.path.exists(readme_fname): + raise ValueError( + f"Expected file '{readme_fname}' - try using -s to specify the " + 'arm-trusted-firmware directory') + readme = tools.ReadFile(readme_fname, binary=False) + first_line = 'Trusted Firmware-A' + if readme.splitlines()[0] != first_line: + raise ValueError(f"'{readme_fname}' does not start with '{first_line}'") + macros = parse_macros(srcdir) + names = parse_names(srcdir) + output = create_code_output(macros, names) + orig = tools.ReadFile(oldfile, binary=False) + re_fip_list = re.compile(r'(.*FIP_TYPE_LIST = \[).*?( ] # end.*)', re.S) + mat = re_fip_list.match(orig) + new_code = mat.group(1) + '\n' + output + mat.group(2) if mat else output + if new_code == orig: + print(f"Existing code in '{oldfile}' is up-to-date") + else: + tools.WriteFile(dstfile, new_code, binary=False) + print(f'Needs update, try:\n\tmeld {dstfile} {oldfile}') + + +def main(argv, oldfile): + """Main program for this tool + + Args: + argv (list): List of str command-line arguments + oldfile (str): Python source file to compare against + + Returns: + int: 0 (exit code) + """ + parser = ArgumentParser(epilog='''Creates an updated version of this code, +with a table of FIP-entry types parsed from the arm-trusted-firmware source +directory''') + parser.add_argument( + '-D', '--debug', action='store_true', + help='Enabling debugging (provides a full traceback on error)') + parser.add_argument( + '-o', '--outfile', type=str, default='fip_util.py.out', + help='Output file to write new fip_util.py file to') + parser.add_argument( + '-s', '--src', type=str, default='.', + help='Directory containing the arm-trusted-firmware source') + args = parser.parse_args(argv) + + if not args.debug: + sys.tracebacklimit = 0 + + parse_atf_source(args.src, args.outfile, oldfile) + return 0 + + +def fiptool(fname, *fip_args): + """Run fiptool with provided arguments + + If the tool fails then this function raises an exception and prints out the + output and stderr. + + Args: + fname (str): Filename of FIP + *fip_args: List of arguments to pass to fiptool + + Returns: + CommandResult: object containing the results + + Raises: + ValueError: the tool failed to run + """ + args = ['fiptool', fname] + list(fip_args) + result = command.RunPipe([args], capture=not VERBOSE, + capture_stderr=not VERBOSE, raise_on_error=False) + if result.return_code: + print(result.stderr, file=sys.stderr) + raise ValueError("Failed to run (error %d): '%s'" % + (result.return_code, ' '.join(args))) + return result + + +if __name__ == "__main__": + sys.exit(main(sys.argv[1:], OUR_FILE)) # pragma: no cover diff --git a/tools/binman/fip_util_test.py b/tools/binman/fip_util_test.py new file mode 100755 index 0000000..4839b29 --- /dev/null +++ b/tools/binman/fip_util_test.py @@ -0,0 +1,405 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2021 Google LLC +# Written by Simon Glass <sjg@chromium.org> + +"""Tests for fip_util + +This tests a few features of fip_util which are not covered by binman's ftest.py +""" + +import os +import shutil +import sys +import tempfile +import unittest + +# Bring in the patman and dtoc libraries (but don't override the first path +# in PYTHONPATH) +OUR_PATH = os.path.dirname(os.path.realpath(__file__)) +sys.path.insert(2, os.path.join(OUR_PATH, '..')) + +# pylint: disable=C0413 +from patman import test_util +from patman import tools +import fip_util + +HAVE_FIPTOOL = True +try: + tools.Run('which', 'fiptool') +except ValueError: + HAVE_FIPTOOL = False + +# pylint: disable=R0902,R0904 +class TestFip(unittest.TestCase): + """Test of fip_util classes""" + #pylint: disable=W0212 + def setUp(self): + # Create a temporary directory for test files + self._indir = tempfile.mkdtemp(prefix='fip_util.') + tools.SetInputDirs([self._indir]) + + # Set up a temporary output directory, used by the tools library when + # compressing files + tools.PrepareOutputDir(None) + + self.src_file = os.path.join(self._indir, 'orig.py') + self.outname = tools.GetOutputFilename('out.py') + self.args = ['-D', '-s', self._indir, '-o', self.outname] + self.readme = os.path.join(self._indir, 'readme.rst') + self.macro_dir = os.path.join(self._indir, 'include/tools_share') + self.macro_fname = os.path.join(self.macro_dir, + 'firmware_image_package.h') + self.name_dir = os.path.join(self._indir, 'tools/fiptool') + self.name_fname = os.path.join(self.name_dir, 'tbbr_config.c') + + macro_contents = ''' + +/* ToC Entry UUIDs */ +#define UUID_TRUSTED_UPDATE_FIRMWARE_SCP_BL2U \\ + {{0x65, 0x92, 0x27, 0x03}, {0x2f, 0x74}, {0xe6, 0x44}, 0x8d, 0xff, {0x57, 0x9a, 0xc1, 0xff, 0x06, 0x10} } +#define UUID_TRUSTED_UPDATE_FIRMWARE_BL2U \\ + {{0x60, 0xb3, 0xeb, 0x37}, {0xc1, 0xe5}, {0xea, 0x41}, 0x9d, 0xf3, {0x19, 0xed, 0xa1, 0x1f, 0x68, 0x01} } + +''' + + name_contents = ''' + +toc_entry_t toc_entries[] = { + { + .name = "SCP Firmware Updater Configuration FWU SCP_BL2U", + .uuid = UUID_TRUSTED_UPDATE_FIRMWARE_SCP_BL2U, + .cmdline_name = "scp-fwu-cfg" + }, + { + .name = "AP Firmware Updater Configuration BL2U", + .uuid = UUID_TRUSTED_UPDATE_FIRMWARE_BL2U, + .cmdline_name = "ap-fwu-cfg" + }, +''' + + def setup_readme(self): + """Set up the readme.txt file""" + tools.WriteFile(self.readme, 'Trusted Firmware-A\n==================', + binary=False) + + def setup_macro(self, data=macro_contents): + """Set up the tbbr_config.c file""" + os.makedirs(self.macro_dir) + tools.WriteFile(self.macro_fname, data, binary=False) + + def setup_name(self, data=name_contents): + """Set up the firmware_image_package.h file""" + os.makedirs(self.name_dir) + tools.WriteFile(self.name_fname, data, binary=False) + + def tearDown(self): + """Remove the temporary input directory and its contents""" + if self._indir: + shutil.rmtree(self._indir) + self._indir = None + tools.FinaliseOutputDir() + + def test_no_readme(self): + """Test handling of a missing readme.rst""" + with self.assertRaises(Exception) as err: + fip_util.main(self.args, self.src_file) + self.assertIn('Expected file', str(err.exception)) + + def test_invalid_readme(self): + """Test that an invalid readme.rst is detected""" + tools.WriteFile(self.readme, 'blah', binary=False) + with self.assertRaises(Exception) as err: + fip_util.main(self.args, self.src_file) + self.assertIn('does not start with', str(err.exception)) + + def test_no_fip_h(self): + """Check handling of missing firmware_image_package.h""" + self.setup_readme() + with self.assertRaises(Exception) as err: + fip_util.main(self.args, self.src_file) + self.assertIn('No such file or directory', str(err.exception)) + + def test_invalid_fip_h(self): + """Check failure to parse firmware_image_package.h""" + self.setup_readme() + self.setup_macro('blah') + with self.assertRaises(Exception) as err: + fip_util.main(self.args, self.src_file) + self.assertIn('Cannot parse file', str(err.exception)) + + def test_parse_fip_h(self): + """Check parsing of firmware_image_package.h""" + self.setup_readme() + # Check parsing the header file + self.setup_macro() + macros = fip_util.parse_macros(self._indir) + expected_macros = { + 'UUID_TRUSTED_UPDATE_FIRMWARE_SCP_BL2U': + ('ToC Entry UUIDs', 'UUID_TRUSTED_UPDATE_FIRMWARE_SCP_BL2U', + bytes([0x65, 0x92, 0x27, 0x03, 0x2f, 0x74, 0xe6, 0x44, + 0x8d, 0xff, 0x57, 0x9a, 0xc1, 0xff, 0x06, 0x10])), + 'UUID_TRUSTED_UPDATE_FIRMWARE_BL2U': + ('ToC Entry UUIDs', 'UUID_TRUSTED_UPDATE_FIRMWARE_BL2U', + bytes([0x60, 0xb3, 0xeb, 0x37, 0xc1, 0xe5, 0xea, 0x41, + 0x9d, 0xf3, 0x19, 0xed, 0xa1, 0x1f, 0x68, 0x01])), + } + self.assertEqual(expected_macros, macros) + + def test_missing_tbbr_c(self): + """Check handlinh of missing tbbr_config.c""" + self.setup_readme() + self.setup_macro() + + # Still need the .c file + with self.assertRaises(Exception) as err: + fip_util.main(self.args, self.src_file) + self.assertIn('tbbr_config.c', str(err.exception)) + + def test_invalid_tbbr_c(self): + """Check failure to parse tbbr_config.c""" + self.setup_readme() + self.setup_macro() + # Check invalid format for C file + self.setup_name('blah') + with self.assertRaises(Exception) as err: + fip_util.main(self.args, self.src_file) + self.assertIn('Cannot parse file', str(err.exception)) + + def test_inconsistent_tbbr_c(self): + """Check tbbr_config.c in a format we don't expect""" + self.setup_readme() + # This is missing a hex value + self.setup_macro(''' + +/* ToC Entry UUIDs */ +#define UUID_TRUSTED_UPDATE_FIRMWARE_SCP_BL2U \\ + {{0x65, 0x92, 0x27,}, {0x2f, 0x74}, {0xe6, 0x44}, 0x8d, 0xff, {0x57, 0x9a, 0xc1, 0xff, 0x06, 0x10} } +#define UUID_TRUSTED_UPDATE_FIRMWARE_BL2U \\ + {{0x60, 0xb3, 0xeb, 0x37}, {0xc1, 0xe5}, {0xea, 0x41}, 0x9d, 0xf3, {0x19, 0xed, 0xa1, 0x1f, 0x68, 0x01} } + +''') + # Check invalid format for C file + self.setup_name('blah') + with self.assertRaises(Exception) as err: + fip_util.main(self.args, self.src_file) + self.assertIn('Cannot parse UUID line 5', str(err.exception)) + + def test_parse_tbbr_c(self): + """Check parsing tbbr_config.c""" + self.setup_readme() + self.setup_macro() + self.setup_name() + + names = fip_util.parse_names(self._indir) + + expected_names = { + 'UUID_TRUSTED_UPDATE_FIRMWARE_SCP_BL2U': ( + 'SCP Firmware Updater Configuration FWU SCP_BL2U', + 'UUID_TRUSTED_UPDATE_FIRMWARE_SCP_BL2U', + 'scp-fwu-cfg'), + 'UUID_TRUSTED_UPDATE_FIRMWARE_BL2U': ( + 'AP Firmware Updater Configuration BL2U', + 'UUID_TRUSTED_UPDATE_FIRMWARE_BL2U', + 'ap-fwu-cfg'), + } + self.assertEqual(expected_names, names) + + def test_uuid_not_in_tbbr_config_c(self): + """Check handling a UUID in the header file that's not in the .c file""" + self.setup_readme() + self.setup_macro(self.macro_contents + ''' +#define UUID_TRUSTED_OS_FW_KEY_CERT \\ + {{0x94, 0x77, 0xd6, 0x03}, {0xfb, 0x60}, {0xe4, 0x11}, 0x85, 0xdd, {0xb7, 0x10, 0x5b, 0x8c, 0xee, 0x04} } + +''') + self.setup_name() + + macros = fip_util.parse_macros(self._indir) + names = fip_util.parse_names(self._indir) + with test_util.capture_sys_output() as (stdout, _): + fip_util.create_code_output(macros, names) + self.assertIn( + "UUID 'UUID_TRUSTED_OS_FW_KEY_CERT' is not mentioned in tbbr_config.c file", + stdout.getvalue()) + + def test_changes(self): + """Check handling of a source file that does/doesn't need changes""" + self.setup_readme() + self.setup_macro() + self.setup_name() + + # Check generating the file when changes are needed + tools.WriteFile(self.src_file, ''' + +# This is taken from tbbr_config.c in ARM Trusted Firmware +FIP_TYPE_LIST = [ + # ToC Entry UUIDs + FipType('scp-fwu-cfg', 'SCP Firmware Updater Configuration FWU SCP_BL2U', + [0x65, 0x92, 0x27, 0x03, 0x2f, 0x74, 0xe6, 0x44, + 0x8d, 0xff, 0x57, 0x9a, 0xc1, 0xff, 0x06, 0x10]), + ] # end +blah de blah + ''', binary=False) + with test_util.capture_sys_output() as (stdout, _): + fip_util.main(self.args, self.src_file) + self.assertIn('Needs update', stdout.getvalue()) + + # Check generating the file when no changes are needed + tools.WriteFile(self.src_file, ''' +# This is taken from tbbr_config.c in ARM Trusted Firmware +FIP_TYPE_LIST = [ + # ToC Entry UUIDs + FipType('scp-fwu-cfg', 'SCP Firmware Updater Configuration FWU SCP_BL2U', + [0x65, 0x92, 0x27, 0x03, 0x2f, 0x74, 0xe6, 0x44, + 0x8d, 0xff, 0x57, 0x9a, 0xc1, 0xff, 0x06, 0x10]), + FipType('ap-fwu-cfg', 'AP Firmware Updater Configuration BL2U', + [0x60, 0xb3, 0xeb, 0x37, 0xc1, 0xe5, 0xea, 0x41, + 0x9d, 0xf3, 0x19, 0xed, 0xa1, 0x1f, 0x68, 0x01]), + ] # end +blah blah''', binary=False) + with test_util.capture_sys_output() as (stdout, _): + fip_util.main(self.args, self.src_file) + self.assertIn('is up-to-date', stdout.getvalue()) + + def test_no_debug(self): + """Test running without the -D flag""" + self.setup_readme() + self.setup_macro() + self.setup_name() + + args = self.args.copy() + args.remove('-D') + tools.WriteFile(self.src_file, '', binary=False) + with test_util.capture_sys_output(): + fip_util.main(args, self.src_file) + + @unittest.skipIf(not HAVE_FIPTOOL, 'No fiptool available') + def test_fiptool_list(self): + """Create a FIP and check that fiptool can read it""" + fwu = b'my data' + tb_fw = b'some more data' + fip = fip_util.FipWriter(0x123, 0x10) + fip.add_entry('fwu', fwu, 0x456) + fip.add_entry('tb-fw', tb_fw, 0) + fip.add_entry(bytes(range(16)), tb_fw, 0) + data = fip.get_data() + fname = tools.GetOutputFilename('data.fip') + tools.WriteFile(fname, data) + result = fip_util.fiptool('info', fname) + self.assertEqual( + '''Firmware Updater NS_BL2U: offset=0xB0, size=0x7, cmdline="--fwu" +Trusted Boot Firmware BL2: offset=0xC0, size=0xE, cmdline="--tb-fw" +00010203-0405-0607-0809-0A0B0C0D0E0F: offset=0xD0, size=0xE, cmdline="--blob" +''', + result.stdout) + + fwu_data = b'my data' + tb_fw_data = b'some more data' + other_fw_data = b'even more' + + def create_fiptool_image(self): + """Create an image with fiptool which we can use for testing + + Returns: + FipReader: reader for the image + """ + fwu = os.path.join(self._indir, 'fwu') + tools.WriteFile(fwu, self.fwu_data) + + tb_fw = os.path.join(self._indir, 'tb_fw') + tools.WriteFile(tb_fw, self.tb_fw_data) + + other_fw = os.path.join(self._indir, 'other_fw') + tools.WriteFile(other_fw, self.other_fw_data) + + fname = tools.GetOutputFilename('data.fip') + uuid = 'e3b78d9e-4a64-11ec-b45c-fba2b9b49788' + fip_util.fiptool('create', '--align', '8', '--plat-toc-flags', '0x123', + '--fwu', fwu, + '--tb-fw', tb_fw, + '--blob', f'uuid={uuid},file={other_fw}', + fname) + + return fip_util.FipReader(tools.ReadFile(fname)) + + @unittest.skipIf(not HAVE_FIPTOOL, 'No fiptool available') + def test_fiptool_create(self): + """Create a FIP with fiptool and check that fip_util can read it""" + reader = self.create_fiptool_image() + + header = reader.header + fents = reader.fents + + self.assertEqual(0x123 << 32, header.flags) + self.assertEqual(fip_util.HEADER_MAGIC, header.name) + self.assertEqual(fip_util.HEADER_SERIAL, header.serial) + + self.assertEqual(3, len(fents)) + fent = fents[0] + self.assertEqual( + bytes([0x4f, 0x51, 0x1d, 0x11, 0x2b, 0xe5, 0x4e, 0x49, + 0xb4, 0xc5, 0x83, 0xc2, 0xf7, 0x15, 0x84, 0x0a]), fent.uuid) + self.assertEqual(0xb0, fent.offset) + self.assertEqual(len(self.fwu_data), fent.size) + self.assertEqual(0, fent.flags) + self.assertEqual(self.fwu_data, fent.data) + + fent = fents[1] + self.assertEqual( + bytes([0x5f, 0xf9, 0xec, 0x0b, 0x4d, 0x22, 0x3e, 0x4d, + 0xa5, 0x44, 0xc3, 0x9d, 0x81, 0xc7, 0x3f, 0x0a]), fent.uuid) + self.assertEqual(0xb8, fent.offset) + self.assertEqual(len(self.tb_fw_data), fent.size) + self.assertEqual(0, fent.flags) + self.assertEqual(self.tb_fw_data, fent.data) + + fent = fents[2] + self.assertEqual( + bytes([0xe3, 0xb7, 0x8d, 0x9e, 0x4a, 0x64, 0x11, 0xec, + 0xb4, 0x5c, 0xfb, 0xa2, 0xb9, 0xb4, 0x97, 0x88]), fent.uuid) + self.assertEqual(0xc8, fent.offset) + self.assertEqual(len(self.other_fw_data), fent.size) + self.assertEqual(0, fent.flags) + self.assertEqual(self.other_fw_data, fent.data) + + @unittest.skipIf(not HAVE_FIPTOOL, 'No fiptool available') + def test_reader_get_entry(self): + """Test get_entry() by name and UUID""" + reader = self.create_fiptool_image() + fents = reader.fents + fent = reader.get_entry('fwu') + self.assertEqual(fent, fents[0]) + + fent = reader.get_entry( + bytes([0x5f, 0xf9, 0xec, 0x0b, 0x4d, 0x22, 0x3e, 0x4d, + 0xa5, 0x44, 0xc3, 0x9d, 0x81, 0xc7, 0x3f, 0x0a])) + self.assertEqual(fent, fents[1]) + + # Try finding entries that don't exist + with self.assertRaises(Exception) as err: + fent = reader.get_entry('scp-fwu-cfg') + self.assertIn("Cannot find FIP entry 'scp-fwu-cfg'", str(err.exception)) + + with self.assertRaises(Exception) as err: + fent = reader.get_entry(bytes(list(range(16)))) + self.assertIn( + "Cannot find FIP entry '00010203-0405-0607-0809-0a0b0c0d0e0f'", + str(err.exception)) + + with self.assertRaises(Exception) as err: + fent = reader.get_entry('blah') + self.assertIn("Unknown FIP entry type 'blah'", str(err.exception)) + + @unittest.skipIf(not HAVE_FIPTOOL, 'No fiptool available') + def test_fiptool_errors(self): + """Check some error reporting from fiptool""" + with self.assertRaises(Exception) as err: + with test_util.capture_sys_output(): + fip_util.fiptool('create', '--fred') + self.assertIn("Failed to run (error 1): 'fiptool create --fred'", + str(err.exception)) + + +if __name__ == '__main__': + unittest.main() diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 6be0037..2f3ec69 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -23,6 +23,7 @@ from binman import cmdline from binman import control from binman import elf from binman import elf_test +from binman import fip_util from binman import fmap_util from binman import state from dtoc import fdt @@ -76,6 +77,7 @@ FSP_M_DATA = b'fsp_m' FSP_S_DATA = b'fsp_s' FSP_T_DATA = b'fsp_t' ATF_BL31_DATA = b'bl31' +ATF_BL2U_DATA = b'bl2u' OPENSBI_DATA = b'opensbi' SCP_DATA = b'scp' TEST_FDT1_DATA = b'fdt1' @@ -179,6 +181,7 @@ class TestFunctional(unittest.TestCase): TestFunctional._MakeInputFile('compress', COMPRESS_DATA) TestFunctional._MakeInputFile('compress_big', COMPRESS_DATA_BIG) TestFunctional._MakeInputFile('bl31.bin', ATF_BL31_DATA) + TestFunctional._MakeInputFile('bl2u.bin', ATF_BL2U_DATA) TestFunctional._MakeInputFile('fw_dynamic.bin', OPENSBI_DATA) TestFunctional._MakeInputFile('scp.bin', SCP_DATA) @@ -2251,7 +2254,7 @@ class TestFunctional(unittest.TestCase): self._DoReadFile('107_cbfs_no_size.dts') self.assertIn('entry must have a size property', str(e.exception)) - def testCbfsNoCOntents(self): + def testCbfsNoContents(self): """Test handling of a CBFS entry which does not provide contentsy""" with self.assertRaises(ValueError) as e: self._DoReadFile('108_cbfs_no_contents.dts') @@ -4533,7 +4536,7 @@ class TestFunctional(unittest.TestCase): def testCollectionSection(self): """Test a collection where a section must be built first""" # Sections never have their contents when GetData() is called, but when - # _BuildSectionData() is called with required=True, a section will force + # BuildSectionData() is called with required=True, a section will force # building the contents, producing an error is anything is still # missing. data = self._DoReadFile('199_collection_section.dts') @@ -4661,6 +4664,294 @@ class TestFunctional(unittest.TestCase): str(e.exception), "Not enough space in '.*u_boot_binman_embed_sm' for data length.*") + def testVersion(self): + """Test we can get the binman version""" + version = '(unreleased)' + self.assertEqual(version, state.GetVersion(self._indir)) + + with self.assertRaises(SystemExit): + with test_util.capture_sys_output() as (_, stderr): + self._DoBinman('-V') + self.assertEqual('Binman %s\n' % version, stderr.getvalue()) + + # Try running the tool too, just to be safe + result = self._RunBinman('-V') + self.assertEqual('Binman %s\n' % version, result.stderr) + + # Set up a version file to make sure that works + version = 'v2025.01-rc2' + tools.WriteFile(os.path.join(self._indir, 'version'), version, + binary=False) + self.assertEqual(version, state.GetVersion(self._indir)) + + def testAltFormat(self): + """Test that alternative formats can be used to extract""" + self._DoReadFileRealDtb('213_fdtmap_alt_format.dts') + + try: + tmpdir, updated_fname = self._SetupImageInTmpdir() + with test_util.capture_sys_output() as (stdout, _): + self._DoBinman('extract', '-i', updated_fname, '-F', 'list') + self.assertEqual( + '''Flag (-F) Entry type Description +fdt fdtmap Extract the devicetree blob from the fdtmap +''', + stdout.getvalue()) + + dtb = os.path.join(tmpdir, 'fdt.dtb') + self._DoBinman('extract', '-i', updated_fname, '-F', 'fdt', '-f', + dtb, 'fdtmap') + + # Check that we can read it and it can be scanning, meaning it does + # not have a 16-byte fdtmap header + data = tools.ReadFile(dtb) + dtb = fdt.Fdt.FromData(data) + dtb.Scan() + + # Now check u-boot which has no alt_format + fname = os.path.join(tmpdir, 'fdt.dtb') + self._DoBinman('extract', '-i', updated_fname, '-F', 'dummy', + '-f', fname, 'u-boot') + data = tools.ReadFile(fname) + self.assertEqual(U_BOOT_DATA, data) + + finally: + shutil.rmtree(tmpdir) + + def testExtblobList(self): + """Test an image with an external blob list""" + data = self._DoReadFile('215_blob_ext_list.dts') + self.assertEqual(REFCODE_DATA + FSP_M_DATA, data) + + def testExtblobListMissing(self): + """Test an image with a missing external blob""" + with self.assertRaises(ValueError) as e: + self._DoReadFile('216_blob_ext_list_missing.dts') + self.assertIn("Filename 'missing-file' not found in input path", + str(e.exception)) + + def testExtblobListMissingOk(self): + """Test an image with an missing external blob that is allowed""" + with test_util.capture_sys_output() as (stdout, stderr): + self._DoTestFile('216_blob_ext_list_missing.dts', + allow_missing=True) + err = stderr.getvalue() + self.assertRegex(err, "Image 'main-section'.*missing.*: blob-ext") + + def testFip(self): + """Basic test of generation of an ARM Firmware Image Package (FIP)""" + data = self._DoReadFile('203_fip.dts') + hdr, fents = fip_util.decode_fip(data) + self.assertEqual(fip_util.HEADER_MAGIC, hdr.name) + self.assertEqual(fip_util.HEADER_SERIAL, hdr.serial) + self.assertEqual(0x123, hdr.flags) + + self.assertEqual(2, len(fents)) + + fent = fents[0] + self.assertEqual( + bytes([0x47, 0xd4, 0x08, 0x6d, 0x4c, 0xfe, 0x98, 0x46, + 0x9b, 0x95, 0x29, 0x50, 0xcb, 0xbd, 0x5a, 0x0]), fent.uuid) + self.assertEqual('soc-fw', fent.fip_type) + self.assertEqual(0x88, fent.offset) + self.assertEqual(len(ATF_BL31_DATA), fent.size) + self.assertEqual(0x123456789abcdef, fent.flags) + self.assertEqual(ATF_BL31_DATA, fent.data) + self.assertEqual(True, fent.valid) + + fent = fents[1] + self.assertEqual( + bytes([0x65, 0x92, 0x27, 0x03, 0x2f, 0x74, 0xe6, 0x44, + 0x8d, 0xff, 0x57, 0x9a, 0xc1, 0xff, 0x06, 0x10]), fent.uuid) + self.assertEqual('scp-fwu-cfg', fent.fip_type) + self.assertEqual(0x8c, fent.offset) + self.assertEqual(len(ATF_BL31_DATA), fent.size) + self.assertEqual(0, fent.flags) + self.assertEqual(ATF_BL2U_DATA, fent.data) + self.assertEqual(True, fent.valid) + + def testFipOther(self): + """Basic FIP with something that isn't a external blob""" + data = self._DoReadFile('204_fip_other.dts') + hdr, fents = fip_util.decode_fip(data) + + self.assertEqual(2, len(fents)) + fent = fents[1] + self.assertEqual('rot-cert', fent.fip_type) + self.assertEqual(b'aa', fent.data) + + def testFipOther(self): + """Basic FIP with something that isn't a external blob""" + data = self._DoReadFile('204_fip_other.dts') + hdr, fents = fip_util.decode_fip(data) + + self.assertEqual(2, len(fents)) + fent = fents[1] + self.assertEqual('rot-cert', fent.fip_type) + self.assertEqual(b'aa', fent.data) + + def testFipNoType(self): + """FIP with an entry of an unknown type""" + with self.assertRaises(ValueError) as e: + self._DoReadFile('205_fip_no_type.dts') + self.assertIn("Must provide a fip-type (node name 'u-boot' is not a known FIP type)", + str(e.exception)) + + def testFipUuid(self): + """Basic FIP with a manual uuid""" + data = self._DoReadFile('206_fip_uuid.dts') + hdr, fents = fip_util.decode_fip(data) + + self.assertEqual(2, len(fents)) + fent = fents[1] + self.assertEqual(None, fent.fip_type) + self.assertEqual( + bytes([0xfc, 0x65, 0x13, 0x92, 0x4a, 0x5b, 0x11, 0xec, + 0x94, 0x35, 0xff, 0x2d, 0x1c, 0xfc, 0x79, 0x9c]), + fent.uuid) + self.assertEqual(U_BOOT_DATA, fent.data) + + def testFipLs(self): + """Test listing a FIP""" + data = self._DoReadFileRealDtb('207_fip_ls.dts') + hdr, fents = fip_util.decode_fip(data) + + try: + tmpdir, updated_fname = self._SetupImageInTmpdir() + with test_util.capture_sys_output() as (stdout, stderr): + self._DoBinman('ls', '-i', updated_fname) + finally: + shutil.rmtree(tmpdir) + lines = stdout.getvalue().splitlines() + expected = [ +'Name Image-pos Size Entry-type Offset Uncomp-size', +'----------------------------------------------------------------', +'main-section 0 2d3 section 0', +' atf-fip 0 90 atf-fip 0', +' soc-fw 88 4 blob-ext 88', +' u-boot 8c 4 u-boot 8c', +' fdtmap 90 243 fdtmap 90', +] + self.assertEqual(expected, lines) + + image = control.images['image'] + entries = image.GetEntries() + fdtmap = entries['fdtmap'] + + fdtmap_data = data[fdtmap.image_pos:fdtmap.image_pos + fdtmap.size] + magic = fdtmap_data[:8] + self.assertEqual(b'_FDTMAP_', magic) + self.assertEqual(tools.GetBytes(0, 8), fdtmap_data[8:16]) + + fdt_data = fdtmap_data[16:] + dtb = fdt.Fdt.FromData(fdt_data) + dtb.Scan() + props = self._GetPropTree(dtb, BASE_DTB_PROPS, prefix='/') + self.assertEqual({ + 'atf-fip/soc-fw:image-pos': 136, + 'atf-fip/soc-fw:offset': 136, + 'atf-fip/soc-fw:size': 4, + 'atf-fip/u-boot:image-pos': 140, + 'atf-fip/u-boot:offset': 140, + 'atf-fip/u-boot:size': 4, + 'atf-fip:image-pos': 0, + 'atf-fip:offset': 0, + 'atf-fip:size': 144, + 'image-pos': 0, + 'offset': 0, + 'fdtmap:image-pos': fdtmap.image_pos, + 'fdtmap:offset': fdtmap.offset, + 'fdtmap:size': len(fdtmap_data), + 'size': len(data), + }, props) + + def testFipExtractOneEntry(self): + """Test extracting a single entry fron an FIP""" + self._DoReadFileRealDtb('207_fip_ls.dts') + image_fname = tools.GetOutputFilename('image.bin') + fname = os.path.join(self._indir, 'output.extact') + control.ExtractEntries(image_fname, fname, None, ['atf-fip/u-boot']) + data = tools.ReadFile(fname) + self.assertEqual(U_BOOT_DATA, data) + + def testFipReplace(self): + """Test replacing a single file in a FIP""" + expected = U_BOOT_DATA + tools.GetBytes(0x78, 50) + data = self._DoReadFileRealDtb('208_fip_replace.dts') + updated_fname = tools.GetOutputFilename('image-updated.bin') + tools.WriteFile(updated_fname, data) + entry_name = 'atf-fip/u-boot' + control.WriteEntry(updated_fname, entry_name, expected, + allow_resize=True) + actual = control.ReadEntry(updated_fname, entry_name) + self.assertEqual(expected, actual) + + new_data = tools.ReadFile(updated_fname) + hdr, fents = fip_util.decode_fip(new_data) + + self.assertEqual(2, len(fents)) + + # Check that the FIP entry is updated + fent = fents[1] + self.assertEqual(0x8c, fent.offset) + self.assertEqual(len(expected), fent.size) + self.assertEqual(0, fent.flags) + self.assertEqual(expected, fent.data) + self.assertEqual(True, fent.valid) + + def testFipMissing(self): + with test_util.capture_sys_output() as (stdout, stderr): + self._DoTestFile('209_fip_missing.dts', allow_missing=True) + err = stderr.getvalue() + self.assertRegex(err, "Image 'main-section'.*missing.*: rmm-fw") + + def testFipSize(self): + """Test a FIP with a size property""" + data = self._DoReadFile('210_fip_size.dts') + self.assertEqual(0x100 + len(U_BOOT_DATA), len(data)) + hdr, fents = fip_util.decode_fip(data) + self.assertEqual(fip_util.HEADER_MAGIC, hdr.name) + self.assertEqual(fip_util.HEADER_SERIAL, hdr.serial) + + self.assertEqual(1, len(fents)) + + fent = fents[0] + self.assertEqual('soc-fw', fent.fip_type) + self.assertEqual(0x60, fent.offset) + self.assertEqual(len(ATF_BL31_DATA), fent.size) + self.assertEqual(ATF_BL31_DATA, fent.data) + self.assertEqual(True, fent.valid) + + rest = data[0x60 + len(ATF_BL31_DATA):0x100] + self.assertEqual(tools.GetBytes(0xff, len(rest)), rest) + + def testFipBadAlign(self): + """Test that an invalid alignment value in a FIP is detected""" + with self.assertRaises(ValueError) as e: + self._DoTestFile('211_fip_bad_align.dts') + self.assertIn( + "Node \'/binman/atf-fip\': FIP alignment 31 must be a power of two", + str(e.exception)) + + def testFipCollection(self): + """Test using a FIP in a collection""" + data = self._DoReadFile('212_fip_collection.dts') + entry1 = control.images['image'].GetEntries()['collection'] + data1 = data[:entry1.size] + hdr1, fents2 = fip_util.decode_fip(data1) + + entry2 = control.images['image'].GetEntries()['atf-fip'] + data2 = data[entry2.offset:entry2.offset + entry2.size] + hdr1, fents2 = fip_util.decode_fip(data2) + + # The 'collection' entry should have U-Boot included at the end + self.assertEqual(entry1.size - len(U_BOOT_DATA), entry2.size) + self.assertEqual(data1, data2 + U_BOOT_DATA) + self.assertEqual(U_BOOT_DATA, data1[-4:]) + + # There should be a U-Boot after the final FIP + self.assertEqual(U_BOOT_DATA, data[-4:]) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/image.py b/tools/binman/image.py index cdc58b3..f0a7d65 100644 --- a/tools/binman/image.py +++ b/tools/binman/image.py @@ -63,9 +63,13 @@ class Image(section.Entry_section): to ignore 'u-boot-bin' in this case, and build it ourselves in binman with 'u-boot-dtb.bin' and 'u-boot.dtb'. See Entry_u_boot_expanded and Entry_blob_phase for details. + missing_etype: Use a default entry type ('blob') if the requested one + does not exist in binman. This is useful if an image was created by + binman a newer version of binman but we want to list it in an older + version which does not support all the entry types. """ def __init__(self, name, node, copy_to_orig=True, test=False, - ignore_missing=False, use_expanded=False): + ignore_missing=False, use_expanded=False, missing_etype=False): super().__init__(None, 'section', node, test=test) self.copy_to_orig = copy_to_orig self.name = 'main-section' @@ -75,6 +79,7 @@ class Image(section.Entry_section): self.fdtmap_data = None self.allow_repack = False self._ignore_missing = ignore_missing + self.missing_etype = missing_etype self.use_expanded = use_expanded self.test_section_timeout = False if not test: @@ -124,7 +129,8 @@ class Image(section.Entry_section): # Return an Image with the associated nodes root = dtb.GetRoot() - image = Image('image', root, copy_to_orig=False, ignore_missing=True) + image = Image('image', root, copy_to_orig=False, ignore_missing=True, + missing_etype=True) image.image_node = fdt_util.GetString(root, 'image-node', 'image') image.fdtmap_dtb = dtb @@ -217,7 +223,7 @@ class Image(section.Entry_section): entries = entry.GetEntries() return entry - def ReadData(self, decomp=True): + def ReadData(self, decomp=True, alt_format=None): tout.Debug("Image '%s' ReadData(), size=%#x" % (self.GetPath(), len(self._data))) return self._data diff --git a/tools/binman/main.py b/tools/binman/main.py index 8c1e478..35944f3 100755 --- a/tools/binman/main.py +++ b/tools/binman/main.py @@ -16,18 +16,31 @@ import sys import traceback import unittest +# Get the absolute path to this file at run-time +our_path = os.path.dirname(os.path.realpath(__file__)) +our1_path = os.path.dirname(our_path) +our2_path = os.path.dirname(our1_path) + +# Extract $(srctree) from Kbuild environment, or use relative paths below +srctree = os.environ.get('srctree', our2_path) + +# +# Do not pollute source tree with cache files: +# https://stackoverflow.com/a/60024195/2511795 +# https://bugs.python.org/issue33499 +# +sys.pycache_prefix = os.path.relpath(our_path, srctree) + # Bring in the patman and dtoc libraries (but don't override the first path # in PYTHONPATH) -our_path = os.path.dirname(os.path.realpath(__file__)) -sys.path.insert(2, os.path.join(our_path, '..')) +sys.path.insert(2, our1_path) from patman import test_util # Bring in the libfdt module sys.path.insert(2, 'scripts/dtc/pylibfdt') -sys.path.insert(2, os.path.join(our_path, '../../scripts/dtc/pylibfdt')) -sys.path.insert(2, os.path.join(our_path, - '../../build-sandbox_spl/scripts/dtc/pylibfdt')) +sys.path.insert(2, os.path.join(srctree, 'scripts/dtc/pylibfdt')) +sys.path.insert(2, os.path.join(srctree, 'build-sandbox_spl/scripts/dtc/pylibfdt')) # When running under python-coverage on Ubuntu 16.04, the dist-packages # directories are dropped from the python path. Add them in so that we can find @@ -59,6 +72,7 @@ def RunTests(debug, verbosity, processes, test_preserve_dirs, args, toolpath): from binman import elf_test from binman import entry_test from binman import fdt_test + from binman import fip_util_test from binman import ftest from binman import image_test import doctest @@ -72,7 +86,8 @@ def RunTests(debug, verbosity, processes, test_preserve_dirs, args, toolpath): result, debug, verbosity, test_preserve_dirs, processes, test_name, toolpath, [entry_test.TestEntry, ftest.TestFunctional, fdt_test.TestFdt, - elf_test.TestElf, image_test.TestImage, cbfs_util_test.TestCbfs]) + elf_test.TestElf, image_test.TestImage, cbfs_util_test.TestCbfs, + fip_util_test.TestFip]) return test_util.ReportResult('binman', test_name, result) diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help index dc2d9c9..551ca87 100644 --- a/tools/binman/missing-blob-help +++ b/tools/binman/missing-blob-help @@ -18,6 +18,17 @@ scp-sunxi: SCP firmware is required for system suspend, but is otherwise optional. Please read the section on SCP firmware in board/sunxi/README.sunxi64 +iot2050-seboot: +See the documentation for IOT2050 board. Your image is missing SEBoot +which is mandatory for board startup. Prebuilt SEBoot located at +meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/tiboot3.bin. + +iot2050-sysfw: +See the documentation for IOT2050 board. Your image is missing system +firmware which is mandatory for board startup. Prebuilt system firmware +located at meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/ +with sysfw prefix. + k3-rti-wdt-firmware: If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for the R5F core(s) to trigger the system reset. One possible source is diff --git a/tools/binman/state.py b/tools/binman/state.py index 9e5b8a3..af0a65e 100644 --- a/tools/binman/state.py +++ b/tools/binman/state.py @@ -16,6 +16,8 @@ import os from patman import tools from patman import tout +OUR_PATH = os.path.dirname(os.path.realpath(__file__)) + # Map an dtb etype to its expected filename DTB_TYPE_FNAME = { 'u-boot-spl-dtb': 'spl/u-boot-spl.dtb', @@ -515,3 +517,19 @@ def TimingShow(): for name, seconds in duration.items(): print('%10s: %10.1fms' % (name, seconds * 1000)) + +def GetVersion(path=OUR_PATH): + """Get the version string for binman + + Args: + path: Path to 'version' file + + Returns: + str: String version, e.g. 'v2021.10' + """ + version_fname = os.path.join(path, 'version') + if os.path.exists(version_fname): + version = tools.ReadFile(version_fname, binary=False) + else: + version = '(unreleased)' + return version diff --git a/tools/binman/test/203_fip.dts b/tools/binman/test/203_fip.dts new file mode 100644 index 0000000..0897337 --- /dev/null +++ b/tools/binman/test/203_fip.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + atf-fip { + fip-hdr-flags = /bits/ 64 <0x123>; + soc-fw { + fip-flags = /bits/ 64 <0x123456789abcdef>; + filename = "bl31.bin"; + }; + + scp-fwu-cfg { + filename = "bl2u.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/204_fip_other.dts b/tools/binman/test/204_fip_other.dts new file mode 100644 index 0000000..6503941 --- /dev/null +++ b/tools/binman/test/204_fip_other.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + atf-fip { + fip-hdr-flags = /bits/ 64 <0x123>; + soc-fw { + fip-flags = /bits/ 64 <0x123456789abcdef>; + filename = "bl31.bin"; + }; + + _testing { + fip-type = "rot-cert"; + return-contents-later; + }; + }; + }; +}; diff --git a/tools/binman/test/205_fip_no_type.dts b/tools/binman/test/205_fip_no_type.dts new file mode 100644 index 0000000..23c8c3b --- /dev/null +++ b/tools/binman/test/205_fip_no_type.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + atf-fip { + fip-hdr-flags = /bits/ 64 <0x123>; + u-boot { + }; + }; + }; +}; diff --git a/tools/binman/test/206_fip_uuid.dts b/tools/binman/test/206_fip_uuid.dts new file mode 100644 index 0000000..c9bd44f --- /dev/null +++ b/tools/binman/test/206_fip_uuid.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + atf-fip { + fip-hdr-flags = /bits/ 64 <0x123>; + soc-fw { + fip-flags = /bits/ 64 <0x123456789abcdef>; + filename = "bl31.bin"; + }; + + u-boot { + fip-uuid = [fc 65 13 92 4a 5b 11 ec + 94 35 ff 2d 1c fc 79 9c]; + }; + }; + }; +}; diff --git a/tools/binman/test/207_fip_ls.dts b/tools/binman/test/207_fip_ls.dts new file mode 100644 index 0000000..630fca1 --- /dev/null +++ b/tools/binman/test/207_fip_ls.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + atf-fip { + fip-hdr-flags = /bits/ 64 <0x123>; + soc-fw { + fip-flags = /bits/ 64 <0x123456789abcdef>; + filename = "bl31.bin"; + }; + + u-boot { + fip-uuid = [fc 65 13 92 4a 5b 11 ec + 94 35 ff 2d 1c fc 79 9c]; + }; + }; + + fdtmap { + }; + }; +}; diff --git a/tools/binman/test/208_fip_replace.dts b/tools/binman/test/208_fip_replace.dts new file mode 100644 index 0000000..432c124 --- /dev/null +++ b/tools/binman/test/208_fip_replace.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + allow-repack; + atf-fip { + fip-hdr-flags = /bits/ 64 <0x123>; + soc-fw { + fip-flags = /bits/ 64 <0x123456789abcdef>; + filename = "bl31.bin"; + }; + + u-boot { + fip-uuid = [fc 65 13 92 4a 5b 11 ec + 94 35 ff 2d 1c fc 79 9c]; + }; + + }; + + u-boot { + }; + + u-boot-dtb { + }; + + fdtmap { + }; + }; +}; diff --git a/tools/binman/test/209_fip_missing.dts b/tools/binman/test/209_fip_missing.dts new file mode 100644 index 0000000..43bb600 --- /dev/null +++ b/tools/binman/test/209_fip_missing.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + atf-fip { + soc-fw { + filename = "bl31.bin"; + }; + + rmm-fw { + filename = "rmm.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/210_fip_size.dts b/tools/binman/test/210_fip_size.dts new file mode 100644 index 0000000..9dfee79 --- /dev/null +++ b/tools/binman/test/210_fip_size.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + atf-fip { + size = <0x100>; + pad-byte = <0xff>; + soc-fw { + filename = "bl31.bin"; + }; + }; + u-boot { + }; + }; +}; diff --git a/tools/binman/test/211_fip_bad_align.dts b/tools/binman/test/211_fip_bad_align.dts new file mode 100644 index 0000000..a090149 --- /dev/null +++ b/tools/binman/test/211_fip_bad_align.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + atf-fip { + fip-align = <31>; + size = <0x100>; + pad-byte = <0xff>; + soc-fw { + filename = "bl31.bin"; + }; + }; + }; +}; diff --git a/tools/binman/test/212_fip_collection.dts b/tools/binman/test/212_fip_collection.dts new file mode 100644 index 0000000..332c023 --- /dev/null +++ b/tools/binman/test/212_fip_collection.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + collection { + content = <&fip &u_boot>; + }; + fip: atf-fip { + soc-fw { + filename = "bl31.bin"; + }; + + scp-fwu-cfg { + filename = "bl2u.bin"; + }; + }; + u_boot: u-boot { + }; + }; +}; diff --git a/tools/binman/test/213_fdtmap_alt_format.dts b/tools/binman/test/213_fdtmap_alt_format.dts new file mode 100644 index 0000000..d9aef04 --- /dev/null +++ b/tools/binman/test/213_fdtmap_alt_format.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + u-boot { + }; + fdtmap { + }; + }; +}; diff --git a/tools/binman/test/214_no_alt_format.dts b/tools/binman/test/214_no_alt_format.dts new file mode 100644 index 0000000..f00bcdd --- /dev/null +++ b/tools/binman/test/214_no_alt_format.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + u-boot { + }; + }; +}; diff --git a/tools/binman/test/215_blob_ext_list.dts b/tools/binman/test/215_blob_ext_list.dts new file mode 100644 index 0000000..aad2f03 --- /dev/null +++ b/tools/binman/test/215_blob_ext_list.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + blob-ext-list { + filenames = "refcode.bin", "fsp_m.bin"; + }; + }; +}; diff --git a/tools/binman/test/216_blob_ext_list_missing.dts b/tools/binman/test/216_blob_ext_list_missing.dts new file mode 100644 index 0000000..c02c335 --- /dev/null +++ b/tools/binman/test/216_blob_ext_list_missing.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + blob-ext-list { + filenames = "refcode.bin", "missing-file"; + }; + }; +}; diff --git a/tools/dtoc/fdt_util.py b/tools/dtoc/fdt_util.py index 37e96b9..19eb13a 100644 --- a/tools/dtoc/fdt_util.py +++ b/tools/dtoc/fdt_util.py @@ -27,6 +27,18 @@ def fdt32_to_cpu(val): """ return struct.unpack('>I', val)[0] +def fdt64_to_cpu(val): + """Convert a device tree cell to an integer + + Args: + val (list): Value to convert (list of 2 4-character strings representing + the cell value) + + Return: + int: A native-endian integer value + """ + return fdt32_to_cpu(val[0]) << 32 | fdt32_to_cpu(val[1]) + def fdt_cells_to_cpu(val, cells): """Convert one or two cells to a long integer @@ -108,6 +120,29 @@ def GetInt(node, propname, default=None): value = fdt32_to_cpu(prop.value) return value +def GetInt64(node, propname, default=None): + """Get a 64-bit integer from a property + + Args: + node (Node): Node object to read from + propname (str): property name to read + default (int): Default value to use if the node/property do not exist + + Returns: + int: value read, or default if none + + Raises: + ValueError: Property is not of the correct size + """ + prop = node.props.get(propname) + if not prop: + return default + if not isinstance(prop.value, list) or len(prop.value) != 2: + raise ValueError("Node '%s' property '%s' should be a list with 2 items for 64-bit values" % + (node.name, propname)) + value = fdt64_to_cpu(prop.value) + return value + def GetString(node, propname, default=None): """Get a string from a property @@ -128,6 +163,27 @@ def GetString(node, propname, default=None): "a single string" % (node.name, propname)) return value +def GetStringList(node, propname, default=None): + """Get a string list from a property + + Args: + node (Node): Node object to read from + propname (str): property name to read + default (list of str): Default value to use if the node/property do not + exist, or None + + Returns: + String value read, or default if none + """ + prop = node.props.get(propname) + if not prop: + return default + value = prop.value + if not isinstance(value, list): + strval = GetString(node, propname) + return [strval] + return value + def GetBool(node, propname, default=False): """Get an boolean from a property @@ -167,6 +223,26 @@ def GetByte(node, propname, default=None): (node.name, propname, len(value), 1)) return ord(value[0]) +def GetBytes(node, propname, size, default=None): + """Get a set of bytes from a property + + Args: + node (Node): Node object to read from + propname (str): property name to read + size (int): Number of bytes to expect + default (bytes): Default value or None + + Returns: + bytes: Bytes value read, or default if none + """ + prop = node.props.get(propname) + if not prop: + return default + if len(prop.bytes) != size: + raise ValueError("Node '%s' property '%s' has length %d, expecting %d" % + (node.name, propname, len(prop.bytes), size)) + return prop.bytes + def GetPhandleList(node, propname): """Get a list of phandles from a property diff --git a/tools/dtoc/test/dtoc_test_simple.dts b/tools/dtoc/test/dtoc_test_simple.dts index 5a6fa88..4c2c70a 100644 --- a/tools/dtoc/test/dtoc_test_simple.dts +++ b/tools/dtoc/test/dtoc_test_simple.dts @@ -16,6 +16,7 @@ boolval; maybe-empty-int = <>; intval = <1>; + int64val = /bits/ 64 <0x123456789abcdef0>; intarray = <2 3 4>; byteval = [05]; bytearray = [06]; diff --git a/tools/dtoc/test_dtoc.py b/tools/dtoc/test_dtoc.py index 752061f..ee17b8d 100755 --- a/tools/dtoc/test_dtoc.py +++ b/tools/dtoc/test_dtoc.py @@ -296,6 +296,7 @@ struct dtd_sandbox_spl_test { \tbool\t\tboolval; \tunsigned char\tbytearray[3]; \tunsigned char\tbyteval; +\tfdt32_t\t\tint64val[2]; \tfdt32_t\t\tintarray[3]; \tfdt32_t\t\tintval; \tunsigned char\tlongbytearray[9]; @@ -355,6 +356,7 @@ static struct dtd_sandbox_spl_test dtv_spl_test = { \t.boolval\t\t= true, \t.bytearray\t\t= {0x6, 0x0, 0x0}, \t.byteval\t\t= 0x5, +\t.int64val\t\t= {0x12345678, 0x9abcdef0}, \t.intarray\t\t= {0x2, 0x3, 0x4}, \t.intval\t\t\t= 0x1, \t.longbytearray\t\t= {0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf, 0x10, diff --git a/tools/dtoc/test_fdt.py b/tools/dtoc/test_fdt.py index d104f3c..55b70e9 100755 --- a/tools/dtoc/test_fdt.py +++ b/tools/dtoc/test_fdt.py @@ -16,9 +16,15 @@ import unittest our_path = os.path.dirname(os.path.realpath(__file__)) sys.path.insert(1, os.path.join(our_path, '..')) +# Bring in the libfdt module +sys.path.insert(2, 'scripts/dtc/pylibfdt') +sys.path.insert(2, os.path.join(our_path, '../../scripts/dtc/pylibfdt')) +sys.path.insert(2, os.path.join(our_path, + '../../build-sandbox_spl/scripts/dtc/pylibfdt')) + from dtoc import fdt from dtoc import fdt_util -from dtoc.fdt_util import fdt32_to_cpu +from dtoc.fdt_util import fdt32_to_cpu, fdt64_to_cpu from fdt import Type, BytesToValue import libfdt from patman import command @@ -122,7 +128,7 @@ class TestFdt(unittest.TestCase): node = self.dtb.GetNode('/spl-test') props = self.dtb.GetProps(node) self.assertEqual(['boolval', 'bytearray', 'byteval', 'compatible', - 'intarray', 'intval', 'longbytearray', + 'int64val', 'intarray', 'intval', 'longbytearray', 'maybe-empty-int', 'notstring', 'stringarray', 'stringval', 'u-boot,dm-pre-reloc'], sorted(props.keys())) @@ -329,6 +335,10 @@ class TestProp(unittest.TestCase): self.assertEqual(Type.INT, prop.type) self.assertEqual(1, fdt32_to_cpu(prop.value)) + prop = self._ConvertProp('int64val') + self.assertEqual(Type.INT, prop.type) + self.assertEqual(0x123456789abcdef0, fdt64_to_cpu(prop.value)) + prop = self._ConvertProp('intarray') self.assertEqual(Type.INT, prop.type) val = [fdt32_to_cpu(val) for val in prop.value] @@ -580,10 +590,21 @@ class TestFdtUtil(unittest.TestCase): self.assertEqual(3, fdt_util.GetInt(self.node, 'missing', 3)) with self.assertRaises(ValueError) as e: - self.assertEqual(3, fdt_util.GetInt(self.node, 'intarray')) + fdt_util.GetInt(self.node, 'intarray') self.assertIn("property 'intarray' has list value: expecting a single " 'integer', str(e.exception)) + def testGetInt64(self): + self.assertEqual(0x123456789abcdef0, + fdt_util.GetInt64(self.node, 'int64val')) + self.assertEqual(3, fdt_util.GetInt64(self.node, 'missing', 3)) + + with self.assertRaises(ValueError) as e: + fdt_util.GetInt64(self.node, 'intarray') + self.assertIn( + "property 'intarray' should be a list with 2 items for 64-bit values", + str(e.exception)) + def testGetString(self): self.assertEqual('message', fdt_util.GetString(self.node, 'stringval')) self.assertEqual('test', fdt_util.GetString(self.node, 'missing', @@ -594,6 +615,15 @@ class TestFdtUtil(unittest.TestCase): self.assertIn("property 'stringarray' has list value: expecting a " 'single string', str(e.exception)) + def testGetStringList(self): + self.assertEqual(['message'], + fdt_util.GetStringList(self.node, 'stringval')) + self.assertEqual( + ['multi-word', 'message'], + fdt_util.GetStringList(self.node, 'stringarray')) + self.assertEqual(['test'], + fdt_util.GetStringList(self.node, 'missing', ['test'])) + def testGetBool(self): self.assertEqual(True, fdt_util.GetBool(self.node, 'boolval')) self.assertEqual(False, fdt_util.GetBool(self.node, 'missing')) @@ -614,6 +644,23 @@ class TestFdtUtil(unittest.TestCase): self.assertIn("property 'intval' has length 4, expecting 1", str(e.exception)) + def testGetBytes(self): + self.assertEqual(bytes([5]), fdt_util.GetBytes(self.node, 'byteval', 1)) + self.assertEqual(None, fdt_util.GetBytes(self.node, 'missing', 3)) + self.assertEqual( + bytes([3]), fdt_util.GetBytes(self.node, 'missing', 3, bytes([3]))) + + with self.assertRaises(ValueError) as e: + fdt_util.GetBytes(self.node, 'longbytearray', 7) + self.assertIn( + "Node 'spl-test' property 'longbytearray' has length 9, expecting 7", + str(e.exception)) + + self.assertEqual( + bytes([0, 0, 0, 1]), fdt_util.GetBytes(self.node, 'intval', 4)) + self.assertEqual( + bytes([3]), fdt_util.GetBytes(self.node, 'missing', 3, bytes([3]))) + def testGetPhandleList(self): dtb = fdt.FdtScan(find_dtb_file('dtoc_test_phandle.dts')) node = dtb.GetNode('/phandle-source2') diff --git a/tools/fdtgrep.c b/tools/fdtgrep.c index db51246..641d6a2 100644 --- a/tools/fdtgrep.c +++ b/tools/fdtgrep.c @@ -438,8 +438,7 @@ static int dump_fdt_regions(struct display_info *disp, const void *blob, fdt = (struct fdt_header *)out; memset(fdt, '\0', sizeof(*fdt)); fdt_set_magic(fdt, FDT_MAGIC); - struct_start = FDT_ALIGN(sizeof(struct fdt_header), - sizeof(struct fdt_reserve_entry)); + struct_start = sizeof(struct fdt_header); fdt_set_off_mem_rsvmap(fdt, struct_start); fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); diff --git a/tools/logos/denx-16bpp.bmp.gz b/tools/logos/denx-16bpp.bmp.gz Binary files differnew file mode 100644 index 0000000..ed99c58 --- /dev/null +++ b/tools/logos/denx-16bpp.bmp.gz diff --git a/tools/logos/denx-24bpp.bmp.gz b/tools/logos/denx-24bpp.bmp.gz Binary files differnew file mode 100644 index 0000000..95b44d3 --- /dev/null +++ b/tools/logos/denx-24bpp.bmp.gz diff --git a/tools/netconsole b/tools/netconsole index 1a0ef22..1554533 100755 --- a/tools/netconsole +++ b/tools/netconsole @@ -34,7 +34,7 @@ if [ -z "${ip}" ] || [ -n "$4" ] ; then usage "Invalid number of arguments" fi -for nc in netcat nc ; do +for nc in socat netcat nc ; do type ${nc} >/dev/null 2>&1 && break done @@ -47,6 +47,10 @@ if type ncb 2>/dev/null ; then # see if ncb is in $PATH exec ncb ${board_out_port} +elif [ "${nc}" = "socat" ] ; then + # socat does support broadcast + while ${nc} STDIO "UDP4-LISTEN:${board_out_port}"; do :; done + elif [ -x ${0%/*}/ncb ] ; then # maybe it's in the same dir as the netconsole script exec ${0%/*}/ncb ${board_out_port} @@ -59,5 +63,9 @@ else fi ) & pid=$! -${nc} -u ${ip} ${board_in_port} +if [ "${nc}" = "socat" ] ; then + ${nc} - "UDP4:${ip}:${board_in_port}" +else + ${nc} -u ${ip} ${board_in_port} +fi kill ${pid} 2>/dev/null |
