diff options
| -rw-r--r-- | board/toradex/apalis_t30/Kconfig | 9 | ||||
| -rw-r--r-- | board/toradex/apalis_t30/apalis_t30.c | 57 |
2 files changed, 65 insertions, 1 deletions
diff --git a/board/toradex/apalis_t30/Kconfig b/board/toradex/apalis_t30/Kconfig index 16224da..9cd4970 100644 --- a/board/toradex/apalis_t30/Kconfig +++ b/board/toradex/apalis_t30/Kconfig @@ -25,6 +25,15 @@ config TDX_CFG_BLOCK_PART config TDX_CFG_BLOCK_OFFSET default "-512" +config APALIS_T30_PCIE_EVALBOARD_INIT + bool "Apalis Evaluation Board PCIe Initialisation" + help + Bring up the Apalis type specific 4 lane PCIe port as well as the + Apalis PCIe port with the PCIe switch as found on the Apalis + Evaluation board. Note that by default both those ports are also left + disabled in the device tree which needs changing as well for this to + actually work. + source "board/toradex/common/Kconfig" endif diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c index 28830b6..ace9c5b 100644 --- a/board/toradex/apalis_t30/apalis_t30.c +++ b/board/toradex/apalis_t30/apalis_t30.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * (C) Copyright 2014-2016 + * (C) Copyright 2014-2018 * Marcel Ziswiler <marcel@ziswiler.com> */ @@ -13,6 +13,7 @@ #include <asm/io.h> #include <dm.h> #include <i2c.h> +#include <pci_tegra.h> #include "../common/tdx-common.h" #include "pinmux-config-apalis_t30.h" @@ -22,6 +23,13 @@ DECLARE_GLOBAL_DATA_PTR; #define PMU_I2C_ADDRESS 0x2D #define MAX_I2C_RETRY 3 +#ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT +#define PEX_PERST_N TEGRA_GPIO(S, 7) /* Apalis GPIO7 */ +#define RESET_MOCI_CTRL TEGRA_GPIO(I, 4) + +static int pci_reset_status; +#endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */ + int arch_misc_init(void) { if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) == @@ -106,6 +114,53 @@ int tegra_pcie_board_init(void) return err; } +#ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT + gpio_request(PEX_PERST_N, "PEX_PERST_N"); + gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL"); +#endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */ + return 0; } + +void tegra_pcie_board_port_reset(struct tegra_pcie_port *port) +{ + int index = tegra_pcie_port_index_of_port(port); + + if (index == 2) { /* I210 Gigabit Ethernet Controller (On-module) */ + tegra_pcie_port_reset(port); + } +#ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT + /* + * Apalis PCIe aka port 1 and Apalis Type Specific 4 Lane PCIe aka port + * 0 share the same RESET_MOCI therefore only assert it once for both + * ports to avoid losing the previously brought up port again. + */ + else if ((index == 1) || (index == 0)) { + /* only do it once per init cycle */ + if (pci_reset_status % 2 == 0) { + /* + * Reset PLX PEX 8605 PCIe Switch plus PCIe devices on + * Apalis Evaluation Board + */ + gpio_direction_output(PEX_PERST_N, 0); + gpio_direction_output(RESET_MOCI_CTRL, 0); + + /* + * Must be asserted for 100 ms after power and clocks + * are stable + */ + mdelay(100); + + gpio_set_value(PEX_PERST_N, 1); + /* + * Err_5: PEX_REFCLK_OUTpx/nx Clock Outputs is not + * Guaranteed Until 900 us After PEX_PERST# De-assertion + */ + mdelay(1); + gpio_set_value(RESET_MOCI_CTRL, 1); + } + pci_reset_status++; + } +#endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */ +} #endif /* CONFIG_PCI_TEGRA */ |