diff options
| -rw-r--r-- | arch/arm/dts/Makefile | 4 | ||||
| -rw-r--r-- | board/logicpd/omap3som/README | 19 | ||||
| -rw-r--r-- | board/logicpd/omap3som/omap3logic.c | 18 | ||||
| -rw-r--r-- | configs/omap3_logic_defconfig | 8 | ||||
| -rw-r--r-- | include/configs/omap3_logic.h | 25 |
5 files changed, 55 insertions, 19 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6b9d6fb..5ccd63d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -373,6 +373,10 @@ dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \ dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb +dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \ + logicpd-torpedo-37xx-devkit.dtb \ + logicpd-som-lv-37xx-devkit.dts + dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \ at91-sama5d2_xplained.dtb diff --git a/board/logicpd/omap3som/README b/board/logicpd/omap3som/README new file mode 100644 index 0000000..06b3998 --- /dev/null +++ b/board/logicpd/omap3som/README @@ -0,0 +1,19 @@ +Summary +======= + +The source for omap3som encompases the DM3730 SOM-LV and DM3730 Torpedo platforms. + +By default, the Torpedo Device Tree is integrated into U-Boot,but the MMC controller, GPIO and I2C controllers are the same, so for the purposes of loading U-Boot, it should be sufficient. However this will display the Model as "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit" upon boot. + +The actual board remains autodetected and the Board will read "DM37xx SOM LV" when used on the DM37 SOM-LV. The device tree loaded with Linux is also correct. + +Integrating the SOM-LV Device Tree into U-Boot +============================================== + +This step is optional, but should you want to change the default to the SOM-LV, locate the configs/omap3_logic_defconfig file and make the following change. + + CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-37xx-devkit" + + make distclean + make omap3_logic_defconfig + diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index 4ad496e..ce17db6 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -36,16 +36,8 @@ DECLARE_GLOBAL_DATA_PTR; -#define CONTROL_WKUP_CTRL 0x48002a5c -#define GPIO_IO_PWRDNZ (1 << 6) -#define PBIASLITEVMODE1 (1 << 8) - -/* - * two dimensional array of strucures containining board name and Linux - * machine IDs; row it selected based on CPU column is slected based - * on hsusb0_data5 pin having a pulldown resistor - */ - +/* This is only needed until SPL gets OF support */ +#ifdef CONFIG_SPL_BUILD static const struct ns16550_platdata omap3logic_serial = { .base = OMAP34XX_UART1, .reg_shift = 2, @@ -57,7 +49,13 @@ U_BOOT_DEVICE(omap3logic_uart) = { "ns16550_serial", &omap3logic_serial }; +#endif +/* + * two dimensional array of strucures containining board name and Linux + * machine IDs; row it selected based on CPU column is slected based + * on hsusb0_data5 pin having a pulldown resistor + */ static struct board_id { char *name; int machine_id; diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 5a88d29..561bdfb 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -4,6 +4,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_LOGIC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit" +CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y @@ -37,6 +39,11 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y +CONFIG_OF_CONTROL=y +# CONFIG_BLK is not set +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_MMC_OPS is not set CONFIG_MMC_OMAP_HS=y CONFIG_MMC_OMAP36XX_PINS=y CONFIG_SYS_NS16550=y @@ -47,4 +54,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="TI" CONFIG_G_DNL_VENDOR_NUM=0x0451 CONFIG_G_DNL_PRODUCT_NUM=0xd022 -CONFIG_OF_LIBFDT=y diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 706175c..772fc60 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -17,12 +17,28 @@ #include <configs/ti_omap3_common.h> +#ifdef CONFIG_SPL_BUILD +/* + * Disable MMC DM for SPL build and can be re-enabled after adding + * DM support in SPL + */ +#undef CONFIG_DM_MMC +#undef OMAP_HSMMC_USE_GPIO + +/* select serial console configuration for SPL */ +#undef CONFIG_CONS_INDEX +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#endif + + /* * We are only ever GP parts and will utilize all of the "downloaded image" * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in * order to allow for BCH8 to fit in. */ #undef CONFIG_SPL_TEXT_BASE +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40200000 #define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */ @@ -34,16 +50,11 @@ /* Hardware drivers */ /* GPIO banks */ +#define CONFIG_OMAP3_GPIO_4 /* GPIO 96..128 is in GPIO bank 4 */ #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ #define CONFIG_USB_OMAP3 -/* select serial console configuration */ -#undef CONFIG_CONS_INDEX -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */ - /* commands to include */ #define CONFIG_CMD_NAND #define CONFIG_CMD_MTDPARTS @@ -52,8 +63,6 @@ /* I2C */ #define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */ -#define EXPANSION_EEPROM_I2C_BUS 2 /* I2C Bus for AT24C64 */ -#define CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID /* USB */ #define CONFIG_USB_MUSB_OMAP2PLUS |