diff options
37 files changed, 3162 insertions, 60 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8c10346..935b2f1 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -961,6 +961,7 @@ dtb-$(CONFIG_ARCH_IMX8) += \ fsl-imx8qm-apalis.dtb \ fsl-imx8qm-mek.dtb \ imx8qm-cgtqmx8.dtb \ + imx8qm-dmsse20-a1.dtb \ imx8qm-rom7720-a1.dtb \ fsl-imx8qxp-ai_ml.dtb \ fsl-imx8qxp-colibri.dtb \ diff --git a/arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi b/arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi new file mode 100644 index 0000000..46a4dfe --- /dev/null +++ b/arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "imx8mq-u-boot.dtsi" + +&pinctrl_uart1 { + bootph-pre-ram; +}; + +&uart1 { /* console */ + bootph-pre-ram; +}; diff --git a/arch/arm/dts/imx8qm-dmsse20-a1.dts b/arch/arm/dts/imx8qm-dmsse20-a1.dts new file mode 100644 index 0000000..cff150d --- /dev/null +++ b/arch/arm/dts/imx8qm-dmsse20-a1.dts @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2017-2018 NXP + * Copyright 2019-2023 Kococonnector GmbH + */ + +/dts-v1/; + +/* First 128KB is for PSCI ATF. */ +/memreserve/ 0x80000000 0x00020000; + +#include "fsl-imx8qm.dtsi" +#include "imx8qm-u-boot.dtsi" + +/ { + model = "Advantech iMX8QM DMSSE20"; + compatible = "fsl,imx8qm-mek", "fsl,imx8qm"; + + aliases { + mmc0 = &usdhc1; + mmc2 = &usdhc3; + }; + + chosen { + bootargs = "console=ttyLP0,115200 earlycon"; + stdout-path = &lpuart0; + }; + + reg_usb_otg1_vbus: usb_otg1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: usdhc2_vmmc { + compatible = "regulator-fixed"; + regulator-name = "sw-3p3-sd1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx8qm-mek { + pinctrl_hog: hoggrp { + fsl,pins = < + SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000048 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0 + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000060 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000060 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000060 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000060 + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000060 + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000060 + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000060 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000060 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000060 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000060 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000060 + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000060 + >; + }; + + pinctrl_fec2: fec2grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0 + SC_P_ENET1_MDC_CONN_ENET1_MDC 0x06000020 + SC_P_ENET1_MDIO_CONN_ENET1_MDIO 0x06000020 + SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060 + SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060 + SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060 + SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060 + SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060 + SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060 + SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060 + SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060 + SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060 + SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060 + SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060 + SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060 + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + SC_P_GPT0_CLK_DMA_I2C1_SCL 0xc600004c + SC_P_GPT0_CAPTURE_DMA_I2C1_SDA 0xc600004c + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + SC_P_GPT1_CLK_DMA_I2C2_SCL 0xc600004c + SC_P_GPT1_CAPTURE_DMA_I2C2_SDA 0xc600004c + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_DMA_UART0_RX 0x06000020 + SC_P_UART0_TX_DMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_rtc_mc_8803: rtc-mc-8803-grp{ + fsl,pins = < + SC_P_SIM0_POWER_EN_DMA_I2C3_SDA 0xc600004c + SC_P_SIM0_PD_DMA_I2C3_SCL 0xc600004c + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp-100mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp-200mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000020 + SC_P_USDHC1_VSELECT_LSIO_GPIO4_IO08 0x00000020 + >; + }; + + pinctrl_usdhc3_gpio: usdhc3grpgpio { + fsl,pins = < + SC_P_USDHC2_WP_LSIO_GPIO4_IO11 0x00000021 + SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041 + SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021 + SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021 + SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021 + SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021 + SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021 + SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000040 + SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000020 + SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000020 + SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000020 + SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000020 + SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000020 + SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000020 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000040 + SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000020 + SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000020 + SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000020 + SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000020 + SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000020 + SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000020 + >; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + bus-width = <4>; + cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-names = "default","state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>; + wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec1 { + fsl,ar8031-phy-fixup; + fsl,magic-packet; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; + }; +}; + +&fec2 { + fsl,ar8031-phy-fixup; + fsl,magic-packet; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + status = "okay"; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; +}; + +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_mc_8803>; + status = "okay"; + + rv8803@32 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + 24c02@50 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,24c04"; + reg = <0x50>; + }; +}; + +&lpuart0 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index 8ae4971..81af89c 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -41,6 +41,8 @@ enum mxc_clock { MXC_SATA_CLK, MXC_NFC_CLK, MXC_I2C_CLK, + MXC_LCDIF1_CLK, + MXC_LCDIF2_CLK, }; enum ldb_di_clock { diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 018b87b..15f844f 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -91,6 +91,13 @@ config TARGET_IMX8QM_ROM7720_A1 select SUPPORT_SPL select IMX8QM +config TARGET_IMX8QM_DMSSE20_A1 + bool "Support i.MX8QM DMS-SE20-A1 board" + select BINMAN + select BOARD_LATE_INIT + select SUPPORT_SPL + select IMX8QM + config TARGET_IMX8QXP_MEK bool "Support i.MX8QXP MEK board" select BINMAN @@ -105,6 +112,7 @@ endchoice source "board/freescale/imx8qm_mek/Kconfig" source "board/freescale/imx8qxp_mek/Kconfig" source "board/congatec/cgtqmx8/Kconfig" +source "board/advantech/imx8qm_dmsse20_a1/Kconfig" source "board/advantech/imx8qm_rom7720_a1/Kconfig" source "board/toradex/apalis-imx8/Kconfig" source "board/toradex/colibri-imx8x/Kconfig" diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index dc51f97..7639439 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -60,6 +60,12 @@ config TARGET_IMX8MQ_PHANBELL select IMX8MQ select IMX8M_LPDDR4 +config TARGET_IMX8MQ_REFORM2 + bool "imx8mq_reform2" + select BINMAN + select IMX8MQ + select IMX8M_LPDDR4 + config TARGET_IMX8MM_DATA_MODUL_EDM_SBC bool "Data Modul eDM SBC i.MX8M Mini" select BINMAN @@ -362,6 +368,7 @@ source "board/kontron/pitx_imx8m/Kconfig" source "board/kontron/sl-mx8mm/Kconfig" source "board/menlo/mx8menlo/Kconfig" source "board/msc/sm2s_imx8mp/Kconfig" +source "board/mntre/imx8mq_reform2/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" source "board/phytec/phycore_imx8mp/Kconfig" source "board/purism/librem5/Kconfig" diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index df865e9..4705e6c 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -914,6 +914,8 @@ static int low_drive_gpu_freq(void *blob) if (cnt != 7) printf("Warning: %s, assigned-clock-rates count %d\n", nodes_path_8mn[0], cnt); + if (cnt < 2) + return -1; assignedclks[cnt - 1] = 200000000; assignedclks[cnt - 2] = 200000000; @@ -1395,40 +1397,6 @@ usb_modify_speed: } #endif -#ifdef CONFIG_OF_BOARD_FIXUP -#ifndef CONFIG_SPL_BUILD -int board_fix_fdt(void *fdt) -{ - if (is_imx8mpul()) { - int i = 0; - int nodeoff, ret; - const char *status = "disabled"; - static const char * const dsi_nodes[] = { - "/soc@0/bus@32c00000/mipi_dsi@32e60000", - "/soc@0/bus@32c00000/lcd-controller@32e80000", - "/dsi-host" - }; - - for (i = 0; i < ARRAY_SIZE(dsi_nodes); i++) { - nodeoff = fdt_path_offset(fdt, dsi_nodes[i]); - if (nodeoff > 0) { -set_status: - ret = fdt_setprop(fdt, nodeoff, "status", status, - strlen(status) + 1); - if (ret == -FDT_ERR_NOSPACE) { - ret = fdt_increase_size(fdt, 512); - if (!ret) - goto set_status; - } - } - } - } - - return 0; -} -#endif -#endif - #if !CONFIG_IS_ENABLED(SYSRESET) void reset_cpu(void) { diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c index cb9d629..1bdc568 100644 --- a/arch/arm/mach-imx/mx6/clock.c +++ b/arch/arm/mach-imx/mx6/clock.c @@ -213,6 +213,7 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num) static u32 decode_pll(enum pll_clocks pll, u32 infreq) { u32 div, test_div, pll_num, pll_denom; + u64 temp64; switch (pll) { case PLL_SYS: @@ -272,7 +273,10 @@ static u32 decode_pll(enum pll_clocks pll, u32 infreq) } test_div = 1 << (2 - test_div); - return infreq * (div + pll_num / pll_denom) / test_div; + temp64 = (u64)infreq; + temp64 *= pll_num; + do_div(temp64, pll_denom); + return infreq * div + (unsigned long)temp64; default: return 0; } @@ -414,6 +418,60 @@ static u32 get_uart_clk(void) return freq / (uart_podf + 1); } +static u32 get_lcd_clk(unsigned int ifnum) +{ + u32 pll_rate; + u32 pred, postd; + + if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() && + !is_mx6sll()) { + debug("This chip does't support lcd\n"); + return 0; + } + + pll_rate = decode_pll(PLL_VIDEO, MXC_HCLK); + if (ifnum == 1) { + if (!is_mx6sl()) { + pred = __raw_readl(&imx_ccm->cscdr2); + pred &= MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK; + pred = pred >> MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET; + + postd = readl(&imx_ccm->cbcmr); + postd &= MXC_CCM_CBCMR_LCDIF1_PODF_MASK; + postd = postd >> MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET; + } else { + pred = __raw_readl(&imx_ccm->cscdr2); + pred &= MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK; + pred = pred >> MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET; + + postd = readl(&imx_ccm->cscmr1); + postd &= MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET; + postd = postd >> MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET; + } + } else if (ifnum == 2) { + if (is_mx6sx()) { + pred = __raw_readl(&imx_ccm->cscdr2); + pred &= MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK; + pred = pred >> MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET; + + postd = readl(&imx_ccm->cscmr1); + postd &= MXC_CCM_CSCMR1_LCDIF2_PODF_MASK; + postd = postd >> MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET; + + } else { + goto if_err; + } + } else { + goto if_err; + } + + return DIV_ROUND_UP_ULL((u64)pll_rate, (postd + 1) * (pred + 1)); + +if_err: + debug("This chip not support lcd iterface %d\n", ifnum); + return 0; +} + static u32 get_cspi_clk(void) { u32 reg, cspi_podf; @@ -744,6 +802,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) } enable_lcdif_clock(base_addr, 1); + debug("pixel clock = %u\n", mxc_get_clock(MXC_LCDIF1_CLK)); } else if (is_mx6sx()) { /* Setting LCDIF2 for i.MX6SX */ if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) @@ -765,6 +824,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET)); enable_lcdif_clock(base_addr, 1); + debug("pixel clock = %u\n", mxc_get_clock(MXC_LCDIF2_CLK)); } } @@ -1269,6 +1329,10 @@ unsigned int mxc_get_clock(enum mxc_clock clk) return get_usdhc_clk(3); case MXC_SATA_CLK: return get_ahb_clk(); + case MXC_LCDIF1_CLK: + return get_lcd_clk(1); + case MXC_LCDIF2_CLK: + return get_lcd_clk(2); default: printf("Unsupported MXC CLK: %d\n", clk); break; diff --git a/arch/arm/mach-imx/romapi.c b/arch/arm/mach-imx/romapi.c index b49e7f8..ff0522c 100644 --- a/arch/arm/mach-imx/romapi.c +++ b/arch/arm/mach-imx/romapi.c @@ -70,6 +70,8 @@ enum boot_device get_boot_device(void) boot_dev = SPI_NOR_BOOT; break; case BT_DEV_TYPE_USB: + if (!is_imx8ulp() && !is_imx9()) + boot_instance = 0; boot_dev = boot_instance + USB_BOOT; break; default: diff --git a/board/advantech/imx8qm_dmsse20_a1/Kconfig b/board/advantech/imx8qm_dmsse20_a1/Kconfig new file mode 100644 index 0000000..f249ab4 --- /dev/null +++ b/board/advantech/imx8qm_dmsse20_a1/Kconfig @@ -0,0 +1,15 @@ +if TARGET_IMX8QM_DMSSE20_A1 + +config SYS_BOARD + default "imx8qm_dmsse20_a1" + +config SYS_VENDOR + default "advantech" + +config SYS_CONFIG_NAME + default "imx8qm_dmsse20" + +config IMX_CONFIG + default "board/advantech/imx8qm_dmsse20_a1/imximage.cfg" + +endif diff --git a/board/advantech/imx8qm_dmsse20_a1/MAINTAINERS b/board/advantech/imx8qm_dmsse20_a1/MAINTAINERS new file mode 100644 index 0000000..8292c6b --- /dev/null +++ b/board/advantech/imx8qm_dmsse20_a1/MAINTAINERS @@ -0,0 +1,7 @@ +i.MX8QM ROM DMSSE20 a1 BOARD +M: Oliver Graute <oliver.graute@kococonnector.com> +S: Maintained +F: board/advantech/imx8qm_dmsse20_a1/ +F: arch/arm/dts/imx8qm-dmsse20-a1.dtb +F: include/configs/imx8qm_dmsse20.h +F: configs/imx8qm_dmsse20a1_defconfig diff --git a/board/advantech/imx8qm_dmsse20_a1/Makefile b/board/advantech/imx8qm_dmsse20_a1/Makefile new file mode 100644 index 0000000..262ffcd --- /dev/null +++ b/board/advantech/imx8qm_dmsse20_a1/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2017 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8qm_dmsse20_a1.o +obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/board/advantech/imx8qm_dmsse20_a1/imx8qm_dmsse20-a1.env b/board/advantech/imx8qm_dmsse20_a1/imx8qm_dmsse20-a1.env new file mode 100644 index 0000000..0c9f9c4 --- /dev/null +++ b/board/advantech/imx8qm_dmsse20_a1/imx8qm_dmsse20-a1.env @@ -0,0 +1,48 @@ +script=boot.scr +image=Image +panel=NULL +console=ttyLP0 +earlycon=lpuart32,0x5a060000 +fdt_addr=0x83000000 +boot_fdt=try +fdt_file=imx8qm-dmsse20-a1.dtb +mmcdev= __stringify(CONFIG_SYS_MMC_ENV_DEV) +mmcpart= __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) +mmcroot=/dev/mmcblk1p2 rootwait rw +mmcautodetect=yes +mmcargs=setenv bootargs console=${console},${baudrate} earlycon=${earlycon},${baudrate} root=${mmcroot} +loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script}; +bootscript=echo Running bootscript from mmc ...; source +loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} +loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file} +mmcboot=echo Booting from mmc ...; + run mmcargs; + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if run loadfdt; then + booti ${loadaddr} - ${fdt_addr}; + else + echo WARN: Cannot load the DT; + fi; + else + echo wait for boot; + fi; +netargs=setenv bootargs console=${console},${baudrate} earlycon=${earlycon},${baudrate} + root=/dev/nfs + ip=dhcp mac=${ethaddr} nfsroot=${serverip}:${nfsroot},v3,tcp rw +netboot=echo Booting from net ...; + run netargs; + if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + ${get_cmd} ${loadaddr} ${image}; + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if ${get_cmd} ${fdt_addr} ${fdt_file}; then + booti ${loadaddr} - ${fdt_addr}; + else + echo WARN: Cannot load the DT; + fi; + else + booti; + fi; diff --git a/board/advantech/imx8qm_dmsse20_a1/imx8qm_dmsse20_a1.c b/board/advantech/imx8qm_dmsse20_a1/imx8qm_dmsse20_a1.c new file mode 100644 index 0000000..867ceff --- /dev/null +++ b/board/advantech/imx8qm_dmsse20_a1/imx8qm_dmsse20_a1.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017-2018 NXP + * Copyright 2019-2023 Kococonnector GmbH + */ + +#include <common.h> +#include <errno.h> +#include <linux/libfdt.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch/imx8-pins.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sys_proto.h> +/* #include <power-domain.h> */ + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +static iomux_cfg_t uart0_pads[] = { + SC_P_UART0_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + SC_P_UART0_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx8_iomux_setup_multiple_pads(uart0_pads, ARRAY_SIZE(uart0_pads)); +} + +int board_early_init_f(void) +{ + sc_pm_clock_rate_t rate = SC_80MHZ; + int ret; + + /* Set UART0 clock root to 80 MHz */ + ret = sc_pm_setup_uart(SC_R_UART_0, rate); + if (ret) + return ret; + + setup_iomux_uart(); + + /* This is needed to because Kernel do not Power Up DC_0 */ + sc_pm_set_resource_power_mode(-1, SC_R_DC_0, SC_PM_PW_MODE_ON); + sc_pm_set_resource_power_mode(-1, SC_R_GPIO_5, SC_PM_PW_MODE_ON); + + return 0; +} + +#if IS_ENABLED(CONFIG_FEC_MXC) +#include <miiphy.h> + +int board_phy_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); + + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +#endif + +#ifdef CONFIG_MXC_GPIO + +#define LVDS_ENABLE IMX_GPIO_NR(1, 6) +#define MIPI_ENABLE IMX_GPIO_NR(1, 7) + +#define BB_GPIO_3V3_1 IMX_GPIO_NR(4, 20) +#define BB_GPIO_3V3_2 IMX_GPIO_NR(4, 24) +#define BB_GPIO_3V3_3 IMX_GPIO_NR(4, 23) + +static void board_gpio_init(void) +{ + /* Enable BB 3V3 */ + gpio_request(BB_GPIO_3V3_1, "bb_3v3_1"); + gpio_direction_output(BB_GPIO_3V3_1, 1); + gpio_request(BB_GPIO_3V3_2, "bb_3v3_2"); + gpio_direction_output(BB_GPIO_3V3_2, 1); + gpio_request(BB_GPIO_3V3_3, "bb_3v3_3"); + gpio_direction_output(BB_GPIO_3V3_3, 1); + + /* enable LVDS SAS boards */ + gpio_request(LVDS_ENABLE, "lvds_enable"); + gpio_direction_output(LVDS_ENABLE, 1); + + /* enable MIPI SAS boards */ + gpio_request(MIPI_ENABLE, "mipi_enable"); + gpio_direction_output(MIPI_ENABLE, 1); +} +#endif + +int checkboard(void) +{ + puts("Board: DMS-SE20A1 8GB\n"); + build_info(); + print_bootinfo(); + + return 0; +} + +int board_init(void) +{ + if (IS_ENABLED(CONFIG_XEN)) + return 0; + +#ifdef CONFIG_MXC_GPIO + board_gpio_init(); +#endif + + return 0; +} + +void board_quiesce_devices(void) +{ + if (IS_ENABLED(CONFIG_XEN)) { + /* Clear magic number to let xen know uboot is over */ + writel(0x0, (void __iomem *)0x80000000); + return; + } +} + +void detail_board_ddr_info(void) +{ + puts("\nDDR "); +} + +/* + * Board specific reset that is system reset. + */ +void reset_cpu(void) +{ + puts("SCI reboot request"); + + while (1) + putc('.'); +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, struct bd_info *bd) +{ + return 0; +} +#endif + +int board_mmc_get_env_dev(int devno) +{ + /* Use EMMC */ + if (IS_ENABLED(CONFIG_XEN)) + return 0; + + return devno; +} + +int mmc_map_to_kernel_blk(int dev_no) +{ + /* Use EMMC */ + if (IS_ENABLED(CONFIG_XEN)) + return 0; + + return dev_no; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + env_set("board_name", "DMS-SE20A1"); + env_set("board_rev", "iMX8QM"); +#endif + + env_set("sec_boot", "no"); +#ifdef CONFIG_AHAB_BOOT + env_set("sec_boot", "yes"); +#endif + + return 0; +} diff --git a/board/advantech/imx8qm_dmsse20_a1/imximage.cfg b/board/advantech/imx8qm_dmsse20_a1/imximage.cfg new file mode 100644 index 0000000..2e51e57 --- /dev/null +++ b/board/advantech/imx8qm_dmsse20_a1/imximage.cfg @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2017-2018 NXP + * Copyright 2019-2023 Kococonnector GmbH + */ + +#define __ASSEMBLY__ + +/* Boot from SD, sector size 0x400 */ +/* SoC type IMX8QM */ +BOOT_FROM sd + +SOC_TYPE IMX8QM +/* Append seco container image */ +APPEND mx8qm-ahab-container.img +/* Create the 2nd container */ +CONTAINER +/* Add scfw image with exec attribute */ +IMAGE SCU mx8qm-val-scfw-tcm.bin +/* Add ATF image with exec attribute */ +IMAGE A35 bl31.bin 0x80000000 +/* Add U-Boot image with load attribute */ +DATA A35 u-boot-dtb.bin 0x80020000 diff --git a/board/advantech/imx8qm_dmsse20_a1/spl.c b/board/advantech/imx8qm_dmsse20_a1/spl.c new file mode 100644 index 0000000..49067bb --- /dev/null +++ b/board/advantech/imx8qm_dmsse20_a1/spl.c @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2017-2018 NXP + * Copyright 2019-2023 Kococonnector GmbH + */ +#include <common.h> +#include <dm.h> +#include <spl.h> +#include <init.h> + +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch/imx8-pins.h> +#include <asm/arch/iomux.h> +#include <fsl_esdhc_imx.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define ESDHC_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define ESDHC_CLK_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define ENET_INPUT_PAD_CTRL ((SC_PAD_CONFIG_OD_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_18V_10MA << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define ENET_NORMAL_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_18V_10MA << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define FSPI_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define GPIO_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define I2C_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) +#ifdef CONFIG_FSL_ESDHC_IMX + +#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 22) +#define USDHC2_CD_GPIO IMX_GPIO_NR(4, 12) + +static struct fsl_esdhc_cfg usdhc_cfg[CFG_SYS_FSL_USDHC_NUM] = { + {USDHC1_BASE_ADDR, 0, 8}, + {USDHC3_BASE_ADDR, 0, 4}, +}; + +static iomux_cfg_t emmc0[] = { + SC_P_EMMC0_CLK | MUX_PAD_CTRL(ESDHC_CLK_PAD_CTRL), + SC_P_EMMC0_CMD | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_DATA0 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_DATA1 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_DATA2 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_DATA3 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_DATA4 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_DATA5 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_DATA6 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_DATA7 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_RESET_B | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_EMMC0_STROBE | MUX_PAD_CTRL(ESDHC_PAD_CTRL), +}; + +static iomux_cfg_t usdhc2_sd[] = { + SC_P_USDHC2_CLK | MUX_PAD_CTRL(ESDHC_CLK_PAD_CTRL), + SC_P_USDHC2_CMD | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_USDHC2_DATA0 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_USDHC2_DATA1 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_USDHC2_DATA2 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_USDHC2_DATA3 | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_USDHC2_RESET_B | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_USDHC2_WP | MUX_MODE_ALT(3) | MUX_PAD_CTRL(ESDHC_PAD_CTRL), + SC_P_USDHC2_CD_B | MUX_MODE_ALT(3) | MUX_PAD_CTRL(ESDHC_PAD_CTRL), +}; + +void init_clk_usdhc(u32 index); + +int board_mmc_init(struct bd_info *bis) +{ + int i, ret; + + /* + * According to the board_mmc_init() the following map is done: + * (U-Boot device node) (Physical Port) + * mmc0 USDHC1 + * mmc1 USDHC2 + * mmc2 USDHC3 + */ + for (i = 0; i < CFG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + ret = sc_pm_set_resource_power_mode(-1, SC_R_SDHC_0, SC_PM_PW_MODE_ON); + if (ret != SC_ERR_NONE) + return ret; + + imx8_iomux_setup_multiple_pads(emmc0, ARRAY_SIZE(emmc0)); + init_clk_usdhc(0); + usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; + case 1: + ret = sc_pm_set_resource_power_mode(-1, SC_R_SDHC_2, SC_PM_PW_MODE_ON); + if (ret != SC_ERR_NONE) + return ret; + ret = sc_pm_set_resource_power_mode(-1, SC_R_GPIO_4, SC_PM_PW_MODE_ON); + if (ret != SC_ERR_NONE) + return ret; + + imx8_iomux_setup_multiple_pads(usdhc2_sd, ARRAY_SIZE(usdhc2_sd)); + init_clk_usdhc(2); + usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + gpio_request(USDHC2_CD_GPIO, "sd2_cd"); + gpio_direction_input(USDHC2_CD_GPIO); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) than supported by the board\n", i + 1); + return 0; + } + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) { + printf("Warning: failed to initialize mmc dev %d\n", i); + return ret; + } + } + + return 0; +} + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = 1; + break; + case USDHC2_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); + break; + case USDHC3_BASE_ADDR: + ret = !gpio_get_value(USDHC2_CD_GPIO); + break; + } + + return ret; +} + +#endif /* CONFIG_FSL_ESDHC_IMX */ + +void spl_board_init(void) +{ +#if defined(CONFIG_SPL_SPI_SUPPORT) + if (sc_rm_is_resource_owned(-1, SC_R_FSPI_0)) { + if (sc_pm_set_resource_power_mode(-1, SC_R_FSPI_0, SC_PM_PW_MODE_ON)) { + puts("Warning: failed to initialize FSPI0\n"); + } + } +#endif + + puts("Normal Boot\n"); +} + +void spl_board_prepare_for_boot(void) +{ +#if defined(CONFIG_SPL_SPI_SUPPORT) + if (sc_rm_is_resource_owned(-1, SC_R_FSPI_0)) { + if (sc_pm_set_resource_power_mode(-1, SC_R_FSPI_0, SC_PM_PW_MODE_OFF)) { + puts("Warning: failed to turn off FSPI0\n"); + } + } +#endif +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif + +void board_init_f(ulong dummy) +{ + /* Clear global data */ + memset((void *)gd, 0, sizeof(gd_t)); + + arch_cpu_init(); + + board_early_init_f(); + + timer_init(); + + preloader_console_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + board_init_r(NULL, 0); +} diff --git a/board/mntre/imx8mq_reform2/Kconfig b/board/mntre/imx8mq_reform2/Kconfig new file mode 100644 index 0000000..f9260cb --- /dev/null +++ b/board/mntre/imx8mq_reform2/Kconfig @@ -0,0 +1,15 @@ +if TARGET_IMX8MQ_REFORM2 + +config SYS_BOARD + default "imx8mq_reform2" + +config SYS_VENDOR + default "mntre" + +config SYS_CONFIG_NAME + default "imx8mq_reform2" + +config IMX_CONFIG + default "arch/arm/mach-imx/imx8m/imximage.cfg" + +endif diff --git a/board/mntre/imx8mq_reform2/MAINTAINERS b/board/mntre/imx8mq_reform2/MAINTAINERS new file mode 100644 index 0000000..946f287 --- /dev/null +++ b/board/mntre/imx8mq_reform2/MAINTAINERS @@ -0,0 +1,7 @@ +REFORM2 IMX8MQ BOARD +M: Lukas F. Hartmann <lukas@mntre.com> +M: Patrick Wildt <patrick@blueri.se> +S: Maintained +F: board/mntre/imx8mq_reform2/ +F: include/configs/imx8mq_reform2.h +F: configs/imx8mq_reform2_defconfig diff --git a/board/mntre/imx8mq_reform2/Makefile b/board/mntre/imx8mq_reform2/Makefile new file mode 100644 index 0000000..2efd56b --- /dev/null +++ b/board/mntre/imx8mq_reform2/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2017 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mq_reform2.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif diff --git a/board/mntre/imx8mq_reform2/imx8mq_reform2.c b/board/mntre/imx8mq_reform2/imx8mq_reform2.c new file mode 100644 index 0000000..be5c506 --- /dev/null +++ b/board/mntre/imx8mq_reform2/imx8mq_reform2.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * Copyright (C) 2018, Boundary Devices <info@boundarydevices.com> + */ + +#include <common.h> +#include <env.h> +#include <init.h> +#include <malloc.h> +#include <errno.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <fsl_esdhc_imx.h> +#include <mmc.h> +#include <asm/arch/imx8mq_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch/clock.h> +#include <spl.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <power/pmic.h> + +DECLARE_GLOBAL_DATA_PTR; + + +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + + +int board_early_init_f(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + set_wdog_reset(wdog); + + return 0; +} + +#ifdef CONFIG_FEC_MXC + +#define PHY_RESET IMX_GPIO_NR(1, 9) +#define PHY_RX_CTL IMX_GPIO_NR(1, 24) +#define PHY_RXC IMX_GPIO_NR(1, 25) +#define PHY_RD0 IMX_GPIO_NR(1, 26) +#define PHY_RD1 IMX_GPIO_NR(1, 27) +#define PHY_RD2 IMX_GPIO_NR(1, 28) +#define PHY_RD3 IMX_GPIO_NR(1, 29) + +#define STRAP_AR8035 (0x28) // 0010 1000 + +static const iomux_v3_cfg_t enet_ar8035_gpio_pads[] = { + IMX8MQ_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(PAD_CTL_DSE6), + IMX8MQ_PAD_ENET_RD0__GPIO1_IO26 | MUX_PAD_CTRL(0x91), + IMX8MQ_PAD_ENET_RD1__GPIO1_IO27 | MUX_PAD_CTRL(0x91), + IMX8MQ_PAD_ENET_RD2__GPIO1_IO28 | MUX_PAD_CTRL(0x91), + IMX8MQ_PAD_ENET_RD3__GPIO1_IO29 | MUX_PAD_CTRL(0xd1), + IMX8MQ_PAD_ENET_RX_CTL__GPIO1_IO24 | MUX_PAD_CTRL(0x91), + /* 1.8V(1)/1.5V select(0) */ + IMX8MQ_PAD_ENET_RXC__GPIO1_IO25 | MUX_PAD_CTRL(0xd1), +}; + +static const iomux_v3_cfg_t enet_ar8035_pads[] = { + IMX8MQ_PAD_ENET_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(0x91), + IMX8MQ_PAD_ENET_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(0x91), + IMX8MQ_PAD_ENET_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(0x91), + IMX8MQ_PAD_ENET_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(0x91), + IMX8MQ_PAD_ENET_RX_CTL__ENET_RGMII_RX_CTL | MUX_PAD_CTRL(0x91), + IMX8MQ_PAD_ENET_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(0x91), +}; + +static void setup_fec(void) +{ + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + /* Pull PHY into reset */ + gpio_request(PHY_RESET, "fec_rst"); + gpio_direction_output(PHY_RESET, 0); + + /* Configure ethernet pins value as GPIOs */ + gpio_request(PHY_RD0, "fec_rd0"); + gpio_direction_output(PHY_RD0, 0); + gpio_request(PHY_RD1, "fec_rd1"); + gpio_direction_output(PHY_RD1, 0); + gpio_request(PHY_RD2, "fec_rd2"); + gpio_direction_output(PHY_RD2, 0); + gpio_request(PHY_RD3, "fec_rd3"); + gpio_direction_output(PHY_RD3, 1); + gpio_request(PHY_RX_CTL, "fec_rx_ctl"); + gpio_direction_output(PHY_RX_CTL, 0); + gpio_request(PHY_RXC, "fec_rxc"); + gpio_direction_output(PHY_RXC, 1); + + /* Set ethernet pins to GPIO to bootstrap PHY */ + imx_iomux_v3_setup_multiple_pads(enet_ar8035_gpio_pads, + ARRAY_SIZE(enet_ar8035_gpio_pads)); + + /* Use 125M anatop REF_CLK1 for ENET1, not from external */ + clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0); + /* Enable RGMII TX clk output */ + setbits_le32(&gpr->gpr[1], BIT(22)); + set_clk_enet(ENET_125MHZ); + + /* 1 ms minimum reset pulse for ar8035 */ + mdelay(1); + + /* Release PHY from reset */ + gpio_set_value(PHY_RESET, 1); + + /* strap hold time for AR8035, 5 fails, 6 works, so 12 should be safe */ + udelay(12); + + /* Change ethernet pins back to normal function */ + imx_iomux_v3_setup_multiple_pads(enet_ar8035_pads, + ARRAY_SIZE(enet_ar8035_pads)); +} +#endif + +#define USB1_HUB_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) +#define USB1_HUB_RESET IMX_GPIO_NR(1, 14) + +static void setup_usb(void) +{ + imx_iomux_v3_setup_pad(IMX8MQ_PAD_GPIO1_IO14__GPIO1_IO14 | + MUX_PAD_CTRL(USB1_HUB_PAD_CTRL)); + gpio_request(USB1_HUB_RESET, "usb1_rst"); + gpio_direction_output(USB1_HUB_RESET, 0); + mdelay(10); + gpio_set_value(USB1_HUB_RESET, 1); +} + +int board_init(void) +{ +#ifdef CONFIG_FEC_MXC + setup_fec(); +#endif + + setup_usb(); + +#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_DWC3) + init_usb_clk(); +#endif + + return 0; +} + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + env_set("board_name", "Reform2"); + env_set("board_rev", "iMX8MQ"); +#endif + + return 0; +} diff --git a/board/mntre/imx8mq_reform2/lpddr4_timing.c b/board/mntre/imx8mq_reform2/lpddr4_timing.c new file mode 100644 index 0000000..e5303db --- /dev/null +++ b/board/mntre/imx8mq_reform2/lpddr4_timing.c @@ -0,0 +1,1014 @@ +/* + * Copyright 2019 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Generated code from MX8M_DDR_tool + * Align with uboot version: + * imx_v2018.03_4.14.78_1.0.0_ga ~ imx_v2018.04_4.19.35_1.0.0_ga + */ +#include "lpddr4_timing_ch2.h" + +static struct dram_cfg_param lpddr4_ddrc_cfg[] = { + /** Initialize DDRC registers **/ + { DDRC_DBG1(0), 1 }, + /* selfref_en=1, SDRAM enter self-refresh state */ + { DDRC_PWRCTL(0), 1 }, + { DDRC_MSTR(0), 0xa0080020 | (CH2_LPDDR4_CS << 24) }, + { DDRC_MSTR2(0), 0 }, + { DDRC_DERATEEN(0), 0x0203 }, + { DDRC_DERATEINT(0), 0x0003e800 }, + { DDRC_RFSHTMG(0), 0x006100e0 }, + { DDRC_INIT0(0), 0xc003061c }, + { DDRC_INIT1(0), 0x009e0000 }, + { DDRC_INIT3(0), 0x00d4002d }, + { DDRC_INIT4(0), CH2_VAL_INIT4 }, + { DDRC_INIT6(0), 0x0066004a }, + { DDRC_INIT7(0), 0x0016004a }, + { DDRC_DRAMTMG0(0), 0x1a201b22 }, + { DDRC_DRAMTMG1(0), 0x00060633 }, + { DDRC_DRAMTMG3(0), 0x00c0c000 }, + { DDRC_DRAMTMG4(0), 0x0f04080f }, + { DDRC_DRAMTMG5(0), 0x02040c0c }, + { DDRC_DRAMTMG6(0), 0x01010007 }, + { DDRC_DRAMTMG7(0), 0x0401 }, + { DDRC_DRAMTMG12(0), 0x00020600 }, + { DDRC_DRAMTMG13(0), 0x0c100002 }, + { DDRC_DRAMTMG14(0), 0xe6 }, + { DDRC_DRAMTMG17(0), 0x00a00050 }, + { DDRC_ZQCTL0(0), 0xc3200018 }, + { DDRC_ZQCTL1(0), 0x028061a8 }, + { DDRC_ZQCTL2(0), 0 }, + { DDRC_DFITMG0(0), 0x0497820a }, + { DDRC_DFITMG1(0), 0x00080303 }, + { DDRC_DFIUPD0(0), 0xe0400018 }, + { DDRC_DFIUPD1(0), 0x00df00e4 }, + { DDRC_DFIUPD2(0), 0x80000000 }, + { DDRC_DFIMISC(0), 0x11 }, + { DDRC_DFITMG2(0), 0x170a }, + { DDRC_DBICTL(0), 1 }, + { DDRC_DFIPHYMSTR(0), 1 }, + { DDRC_RANKCTL(0), 0x0639 }, + { DDRC_DRAMTMG2(0), 0x070e1617 }, + + /* address mapping */ + { DDRC_ADDRMAP0(0), CH2_VAL_DDRC_ADDRMAP0 }, + { DDRC_ADDRMAP3(0), 0 }, + /* addrmap_col_b10 and addrmap_col_b11 set to de-activated (5-bit width) */ + { DDRC_ADDRMAP4(0), 0x1f1f }, + /* bank interleave */ + /* addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0 */ + { DDRC_ADDRMAP1(0), 0x00080808 }, + /* addrmap_row_b11, addrmap_row_b10_b2, addrmap_row_b1, addrmap_row_b0 */ + { DDRC_ADDRMAP5(0), 0x07070707 }, + /* addrmap_row_b15, addrmap_row_b14, addrmap_row_b13, addrmap_row_b12 */ + { DDRC_ADDRMAP6(0), CH2_VAL_DDRC_ADDRMAP6 }, + { DDRC_ADDRMAP7(0), 0x0f0f }, + { DDRC_FREQ1_DERATEEN(0), 1 }, + { DDRC_FREQ1_DERATEINT(0), 0xd0c0 }, + { DDRC_FREQ1_RFSHCTL0(0), 0x0020d040 }, + { DDRC_FREQ1_RFSHTMG(0), 0x0014002f }, + { DDRC_FREQ1_INIT3(0), 0x00940009 }, + { DDRC_FREQ1_INIT4(0), CH2_VAL_INIT4 }, + { DDRC_FREQ1_INIT6(0), 0x0066004a }, + { DDRC_FREQ1_INIT7(0), 0x0016004a }, + { DDRC_FREQ1_DRAMTMG0(0), 0x0b070508 }, + { DDRC_FREQ1_DRAMTMG1(0), 0x0003040b }, + { DDRC_FREQ1_DRAMTMG2(0), 0x0305090c }, + { DDRC_FREQ1_DRAMTMG3(0), 0x00505000 }, + { DDRC_FREQ1_DRAMTMG4(0), 0x04040204 }, + { DDRC_FREQ1_DRAMTMG5(0), 0x02030303 }, + { DDRC_FREQ1_DRAMTMG6(0), 0x01010004 }, + { DDRC_FREQ1_DRAMTMG7(0), 0x0301 }, + { DDRC_FREQ1_DRAMTMG12(0), 0x00020300 }, + { DDRC_FREQ1_DRAMTMG13(0), 0x0a100002 }, + { DDRC_FREQ1_DRAMTMG14(0), 0x31 }, + { DDRC_FREQ1_DRAMTMG17(0), 0x00220011 }, + { DDRC_FREQ1_ZQCTL0(0), 0xc0a70006 }, + { DDRC_FREQ1_DFITMG0(0), 0x03858202 }, + { DDRC_FREQ1_DFITMG1(0), 0x00080303 }, + { DDRC_FREQ1_DFITMG2(0), 0x0502 }, + { DDRC_ODTMAP(0), 0 }, + { DDRC_SCHED(0), 0x29001505 }, + { DDRC_SCHED1(0), 0x2c }, + { DDRC_PERFHPR1(0), 0x5900575b }, + { DDRC_PERFLPR1(0), 0x90000096 }, + { DDRC_PERFWR1(0), 0x1000012c }, + { DDRC_DBG0(0), 0x16 }, + { DDRC_DBG1(0), 0 }, + { DDRC_DBGCMD(0), 0 }, + { DDRC_SWCTL(0), 1 }, + { DDRC_POISONCFG(0), 0x11 }, + { DDRC_PCCFG(0), 0x0111 }, + { DDRC_PCFGR_0(0), 0x10f3 }, + { DDRC_PCFGW_0(0), 0x72ff }, + { DDRC_PCTRL_0(0), 1 }, + { DDRC_PCFGQOS0_0(0), 0x0e00 }, + { DDRC_PCFGQOS1_0(0), 0x0062ffff }, + { DDRC_PCFGWQOS0_0(0), 0x0e00 }, + { DDRC_PCFGWQOS1_0(0), 0xffff }, +}; + +/* PHY Initialize Configuration */ +static struct dram_cfg_param lpddr4_ddrphy_cfg[] = { + { 0x100a0, 0 }, + { 0x100a1, 1 }, + { 0x100a2, 2 }, + { 0x100a3, 3 }, + { 0x100a4, 4 }, + { 0x100a5, 5 }, + { 0x100a6, 6 }, + { 0x100a7, 7 }, + { 0x110a0, 0 }, + { 0x110a1, 1 }, + { 0x110a2, 2 }, + { 0x110a3, 3 }, + { 0x110a4, 4 }, + { 0x110a5, 5 }, + { 0x110a6, 6 }, + { 0x110a7, 7 }, + { 0x120a0, 0 }, + { 0x120a1, 1 }, + { 0x120a2, 2 }, + { 0x120a3, 3 }, + { 0x120a4, 4 }, + { 0x120a5, 5 }, + { 0x120a6, 6 }, + { 0x120a7, 7 }, + { 0x130a0, 0 }, + { 0x130a1, 1 }, + { 0x130a2, 2 }, + { 0x130a3, 3 }, + { 0x130a4, 4 }, + { 0x130a5, 5 }, + { 0x130a6, 6 }, + { 0x130a7, 7 }, + { 0x1005f, 0x01ff }, + { 0x1015f, 0x01ff }, + { 0x1105f, 0x01ff }, + { 0x1115f, 0x01ff }, + { 0x1205f, 0x01ff }, + { 0x1215f, 0x01ff }, + { 0x1305f, 0x01ff }, + { 0x1315f, 0x01ff }, + { 0x11005f, 0x01ff }, + { 0x11015f, 0x01ff }, + { 0x11105f, 0x01ff }, + { 0x11115f, 0x01ff }, + { 0x11205f, 0x01ff }, + { 0x11215f, 0x01ff }, + { 0x11305f, 0x01ff }, + { 0x11315f, 0x01ff }, + { 0x0055, 0x01ff }, + { 0x1055, 0x01ff }, + { 0x2055, 0x01ff }, + { 0x3055, 0x01ff }, + { 0x4055, 0x01ff }, + { 0x5055, 0x01ff }, + { 0x6055, 0x01ff }, + { 0x7055, 0x01ff }, + { 0x8055, 0x01ff }, + { 0x9055, 0x01ff }, + { 0x200c5, 0x19 }, + { 0x1200c5, 7 }, + { 0x2002e, 2 }, + { 0x12002e, 1 }, + { 0x90204, 0 }, + { 0x190204, 0 }, + { 0x20024, 0x01ab }, + { 0x2003a, 0 }, + { 0x120024, 0x01ab }, + { 0x2003a, 0 }, + { 0x20056, 3 }, + { 0x120056, 3 }, + { 0x1004d, 0x0e00 }, + { 0x1014d, 0x0e00 }, + { 0x1104d, 0x0e00 }, + { 0x1114d, 0x0e00 }, + { 0x1204d, 0x0e00 }, + { 0x1214d, 0x0e00 }, + { 0x1304d, 0x0e00 }, + { 0x1314d, 0x0e00 }, + { 0x11004d, 0x0e00 }, + { 0x11014d, 0x0e00 }, + { 0x11104d, 0x0e00 }, + { 0x11114d, 0x0e00 }, + { 0x11204d, 0x0e00 }, + { 0x11214d, 0x0e00 }, + { 0x11304d, 0x0e00 }, + { 0x11314d, 0x0e00 }, + { 0x10049, 0x0eba }, + { 0x10149, 0x0eba }, + { 0x11049, 0x0eba }, + { 0x11149, 0x0eba }, + { 0x12049, 0x0eba }, + { 0x12149, 0x0eba }, + { 0x13049, 0x0eba }, + { 0x13149, 0x0eba }, + { 0x110049, 0x0eba }, + { 0x110149, 0x0eba }, + { 0x111049, 0x0eba }, + { 0x111149, 0x0eba }, + { 0x112049, 0x0eba }, + { 0x112149, 0x0eba }, + { 0x113049, 0x0eba }, + { 0x113149, 0x0eba }, + { 0x0043, 0x63 }, + { 0x1043, 0x63 }, + { 0x2043, 0x63 }, + { 0x3043, 0x63 }, + { 0x4043, 0x63 }, + { 0x5043, 0x63 }, + { 0x6043, 0x63 }, + { 0x7043, 0x63 }, + { 0x8043, 0x63 }, + { 0x9043, 0x63 }, + { 0x20018, 3 }, + { 0x20075, 4 }, + { 0x20050, 0 }, + { 0x20008, 0x0320 }, + { 0x120008, 0xa7 }, + { 0x20088, 9 }, + { 0x200b2, 0xdc }, + { 0x10043, 0x05a1 }, + { 0x10143, 0x05a1 }, + { 0x11043, 0x05a1 }, + { 0x11143, 0x05a1 }, + { 0x12043, 0x05a1 }, + { 0x12143, 0x05a1 }, + { 0x13043, 0x05a1 }, + { 0x13143, 0x05a1 }, + { 0x1200b2, 0xdc }, + { 0x110043, 0x05a1 }, + { 0x110143, 0x05a1 }, + { 0x111043, 0x05a1 }, + { 0x111143, 0x05a1 }, + { 0x112043, 0x05a1 }, + { 0x112143, 0x05a1 }, + { 0x113043, 0x05a1 }, + { 0x113143, 0x05a1 }, + { 0x200fa, 1 }, + { 0x1200fa, 1 }, + { 0x20019, 1 }, + { 0x120019, 1 }, + { 0x200f0, 0 }, + { 0x200f1, 0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5555 }, + { 0x200f5, 0 }, + { 0x200f6, 0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0 }, + { 0x2002d, 0 }, + { 0x12002d, 0 }, + { 0x200c7, 0x80 }, + { 0x1200c7, 0x80 }, + { 0x200ca, 0x0106 }, + { 0x1200ca, 0x0106 }, + { 0x20110, 2 }, + { 0x20111, 3 }, + { 0x20112, 4 }, + { 0x20113, 5 }, + { 0x20114, 0 }, + { 0x20115, 1 }, +}; + +/* P0 message block parameter for training firmware */ +static struct dram_cfg_param lpddr4_fsp0_cfg[] = { + { 0xd0000, 0 }, + { 0x54003, 0x0c80 }, + { 0x54004, 2 }, + { 0x54005, 0x2228 }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54008, 0x131f }, + { 0x54009, LPDDR4_HDT_CTL_3200_1D }, + { 0x5400b, 2 }, + { 0x54012, 0x10 | (CH2_LPDDR4_CS << 8) }, + { 0x54019, 0x2dd4 }, + { 0x5401a, 0x31 }, + { 0x5401b, 0x4a66 }, + { 0x5401c, 0x4a08 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x2dd4 }, + { 0x54020, 0x31 }, + { 0x54021, 0x4a66 }, + { 0x54022, 0x4a08 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, CH2_LPDDR4_CS }, + { 0x54032, 0xd400 }, + { 0x54033, 0x312d }, + { 0x54034, 0x6600 }, + { 0x54035, 0x084a }, + { 0x54036, 0x4a }, + { 0x54037, 0x1600 }, + { 0x54038, 0xd400 }, + { 0x54039, 0x312d }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x084a }, + { 0x5403c, 0x4a }, + { 0x5403d, 0x1600 }, + { 0xd0000, 1 }, +}; + + +/* P1 message block parameter for training firmware */ +static struct dram_cfg_param lpddr4_fsp1_cfg[] = { + { 0xd0000, 0 }, + { 0x54002, 1 }, + { 0x54003, 0x029c }, + { 0x54004, 2 }, + { 0x54005, 0x2228 }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54008, 0x121f }, + { 0x54009, LPDDR4_HDT_CTL_3200_1D }, + { 0x5400b, 2 }, + { 0x54012, 0x10 | (CH2_LPDDR4_CS << 8) }, + { 0x54019, 0x0994 }, + { 0x5401a, 0x31 }, + { 0x5401b, 0x4a66 }, + { 0x5401c, 0x4a08 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x0994 }, + { 0x54020, 0x31 }, + { 0x54021, 0x4a66 }, + { 0x54022, 0x4a08 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, CH2_LPDDR4_CS }, + { 0x54032, 0x9400 }, + { 0x54033, 0x3109 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x084a }, + { 0x54036, 0x4a }, + { 0x54037, 0x1600 }, + { 0x54038, 0x9400 }, + { 0x54039, 0x3109 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x084a }, + { 0x5403c, 0x4a }, + { 0x5403d, 0x1600 }, + { 0xd0000, 1 }, +}; + + +/* P0 2D message block parameter for training firmware */ +static struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = { + { 0xd0000, 0 }, + { 0x54003, 0x0c80 }, + { 0x54004, 2 }, + { 0x54005, 0x2228 }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54008, 0x61 }, + { 0x54009, LPDDR4_HDT_CTL_3200_1D }, + { 0x5400b, 2 }, + { 0x5400d, 0x0100 }, + { 0x5400f, 0x0100 }, + { 0x54010, 0x1f7f }, + { 0x54012, 0x10 | (CH2_LPDDR4_CS << 8) }, + { 0x54019, 0x2dd4 }, + { 0x5401a, 0x31 }, + { 0x5401b, 0x4a66 }, + { 0x5401c, 0x4a08 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x2dd4 }, + { 0x54020, 0x31 }, + { 0x54021, 0x4a66 }, + { 0x54022, 0x4a08 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, CH2_LPDDR4_CS }, + { 0x54032, 0xd400 }, + { 0x54033, 0x312d }, + { 0x54034, 0x6600 }, + { 0x54035, 0x084a }, + { 0x54036, 0x4a }, + { 0x54037, 0x1600 }, + { 0x54038, 0xd400 }, + { 0x54039, 0x312d }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x084a }, + { 0x5403c, 0x4a }, + { 0x5403d, 0x1600 }, + { 0xd0000, 1 }, +}; + +/* DRAM PHY init engine image */ +static struct dram_cfg_param lpddr4_phy_pie[] = { + { 0xd0000, 0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x0400 }, + { 0x90002, 0x010e }, + { 0x90003, 0 }, + { 0x90004, 0 }, + { 0x90005, 8 }, + { 0x90029, 0x0b }, + { 0x9002a, 0x0480 }, + { 0x9002b, 0x0109 }, + { 0x9002c, 8 }, + { 0x9002d, 0x0448 }, + { 0x9002e, 0x0139 }, + { 0x9002f, 8 }, + { 0x90030, 0x0478 }, + { 0x90031, 0x0109 }, + { 0x90032, 0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x0109 }, + { 0x90035, 2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x0139 }, + { 0x90038, 0x0f }, + { 0x90039, 0x07c0 }, + { 0x9003a, 0x0139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x0630 }, + { 0x9003d, 0x0159 }, + { 0x9003e, 0x014f }, + { 0x9003f, 0x0630 }, + { 0x90040, 0x0159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x0630 }, + { 0x90043, 0x0149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x0630 }, + { 0x90046, 0x0179 }, + { 0x90047, 8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x0109 }, + { 0x9004a, 0 }, + { 0x9004b, 0x07c8 }, + { 0x9004c, 0x0109 }, + { 0x9004d, 0 }, + { 0x9004e, 1 }, + { 0x9004f, 8 }, + { 0x90050, 0 }, + { 0x90051, 0x045a }, + { 0x90052, 9 }, + { 0x90053, 0 }, + { 0x90054, 0x0448 }, + { 0x90055, 0x0109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x0630 }, + { 0x90058, 0x0179 }, + { 0x90059, 1 }, + { 0x9005a, 0x0618 }, + { 0x9005b, 0x0109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x0630 }, + { 0x9005e, 0x0149 }, + { 0x9005f, 8 }, + { 0x90060, 4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x0630 }, + { 0x90064, 0x0149 }, + { 0x90065, 0 }, + { 0x90066, 4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x0630 }, + { 0x9006a, 0x0149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0 }, + { 0x9006f, 4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x0549 }, + { 0x90072, 0x0630 }, + { 0x90073, 0x0159 }, + { 0x90074, 0x0d49 }, + { 0x90075, 0x0630 }, + { 0x90076, 0x0159 }, + { 0x90077, 0x094a }, + { 0x90078, 0x0630 }, + { 0x90079, 0x0159 }, + { 0x9007a, 0x0441 }, + { 0x9007b, 0x0630 }, + { 0x9007c, 0x0149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x0630 }, + { 0x9007f, 0x0149 }, + { 0x90080, 1 }, + { 0x90081, 0x0630 }, + { 0x90082, 0x0149 }, + { 0x90083, 0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x0109 }, + { 0x90086, 0x0a }, + { 0x90087, 0x10 }, + { 0x90088, 0x0109 }, + { 0x90089, 9 }, + { 0x9008a, 0x03c0 }, + { 0x9008b, 0x0149 }, + { 0x9008c, 9 }, + { 0x9008d, 0x03c0 }, + { 0x9008e, 0x0159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x0109 }, + { 0x90092, 0 }, + { 0x90093, 0x03c0 }, + { 0x90094, 0x0109 }, + { 0x90095, 0x18 }, + { 0x90096, 4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0x0a }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x0109 }, + { 0x9009e, 2 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x0109 }, + { 0x900a1, 5 }, + { 0x900a2, 0x07c0 }, + { 0x900a3, 0x0109 }, + { 0x900a4, 0x10 }, + { 0x900a5, 0x10 }, + { 0x900a6, 0x0109 }, + { 0x40000, 0x0811 }, + { 0x40020, 0x0880 }, + { 0x40040, 0 }, + { 0x40060, 0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0 }, + { 0x40003, 0x0811 }, + { 0x40023, 0x0880 }, + { 0x40043, 0 }, + { 0x40063, 0 }, + { 0x40004, 0x0720 }, + { 0x40024, 0x0f }, + { 0x40044, 0x1740 }, + { 0x40064, 0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0 }, + { 0x40006, 0x0716 }, + { 0x40026, 0x0f }, + { 0x40046, 0x2001 }, + { 0x40066, 0 }, + { 0x40007, 0x0716 }, + { 0x40027, 0x0f }, + { 0x40047, 0x2800 }, + { 0x40067, 0 }, + { 0x40008, 0x0716 }, + { 0x40028, 0x0f }, + { 0x40048, 0x0f00 }, + { 0x40068, 0 }, + { 0x40009, 0x0720 }, + { 0x40029, 0x0f }, + { 0x40049, 0x1400 }, + { 0x40069, 0 }, + { 0x4000a, 0x0e08 }, + { 0x4002a, 0x0c15 }, + { 0x4004a, 0 }, + { 0x4006a, 0 }, + { 0x4000b, 0x0623 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0 }, + { 0x4006b, 0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0 }, + { 0x4006c, 0 }, + { 0x4000d, 0x0e08 }, + { 0x4002d, 0x0c1a }, + { 0x4004d, 0 }, + { 0x4006d, 0 }, + { 0x4000e, 0x0623 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0 }, + { 0x4006e, 0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0 }, + { 0x4006f, 0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0 }, + { 0x40070, 0 }, + { 0x40011, 0x0708 }, + { 0x40031, 5 }, + { 0x40051, 0 }, + { 0x40071, 0x2002 }, + { 0x40012, 8 }, + { 0x40032, 0x80 }, + { 0x40052, 0 }, + { 0x40072, 0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0 }, + { 0x40073, 0 }, + { 0x40014, 0x0708 }, + { 0x40034, 0x0a }, + { 0x40054, 0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0 }, + { 0x40075, 0 }, + { 0x40016, 0x060a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0 }, + { 0x40017, 0x061a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0 }, + { 0x40018, 0x060a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0 }, + { 0x40019, 0x0642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x0880 }, + { 0x4005a, 0 }, + { 0x4007a, 0 }, + { 0x900a7, 0 }, + { 0x900a8, 0x0790 }, + { 0x900a9, 0x011a }, + { 0x900aa, 8 }, + { 0x900ab, 0x07aa }, + { 0x900ac, 0x2a }, + { 0x900ad, 0x10 }, + { 0x900ae, 0x07b2 }, + { 0x900af, 0x2a }, + { 0x900b0, 0 }, + { 0x900b1, 0x07c8 }, + { 0x900b2, 0x0109 }, + { 0x900b3, 0x10 }, + { 0x900b4, 0x02a8 }, + { 0x900b5, 0x0129 }, + { 0x900b6, 8 }, + { 0x900b7, 0x0370 }, + { 0x900b8, 0x0129 }, + { 0x900b9, 0x0a }, + { 0x900ba, 0x03c8 }, + { 0x900bb, 0x01a9 }, + { 0x900bc, 0x0c }, + { 0x900bd, 0x0408 }, + { 0x900be, 0x0199 }, + { 0x900bf, 0x14 }, + { 0x900c0, 0x0790 }, + { 0x900c1, 0x011a }, + { 0x900c2, 8 }, + { 0x900c3, 4 }, + { 0x900c4, 0x18 }, + { 0x900c5, 0x0e }, + { 0x900c6, 0x0408 }, + { 0x900c7, 0x0199 }, + { 0x900c8, 8 }, + { 0x900c9, 0x8568 }, + { 0x900ca, 0x0108 }, + { 0x900cb, 0x18 }, + { 0x900cc, 0x0790 }, + { 0x900cd, 0x016a }, + { 0x900ce, 8 }, + { 0x900cf, 0x01d8 }, + { 0x900d0, 0x0169 }, + { 0x900d1, 0x10 }, + { 0x900d2, 0x8558 }, + { 0x900d3, 0x0168 }, + { 0x900d4, 0x70 }, + { 0x900d5, 0x0788 }, + { 0x900d6, 0x016a }, + { 0x900d7, 0x1ff8 }, + { 0x900d8, 0x85a8 }, + { 0x900d9, 0x01e8 }, + { 0x900da, 0x50 }, + { 0x900db, 0x0798 }, + { 0x900dc, 0x016a }, + { 0x900dd, 0x60 }, + { 0x900de, 0x07a0 }, + { 0x900df, 0x016a }, + { 0x900e0, 8 }, + { 0x900e1, 0x8310 }, + { 0x900e2, 0x0168 }, + { 0x900e3, 8 }, + { 0x900e4, 0xa310 }, + { 0x900e5, 0x0168 }, + { 0x900e6, 0x0a }, + { 0x900e7, 0x0408 }, + { 0x900e8, 0x0169 }, + { 0x900e9, 0x6e }, + { 0x900ea, 0 }, + { 0x900eb, 0x68 }, + { 0x900ec, 0 }, + { 0x900ed, 0x0408 }, + { 0x900ee, 0x0169 }, + { 0x900ef, 0 }, + { 0x900f0, 0x8310 }, + { 0x900f1, 0x0168 }, + { 0x900f2, 0 }, + { 0x900f3, 0xa310 }, + { 0x900f4, 0x0168 }, + { 0x900f5, 0x1ff8 }, + { 0x900f6, 0x85a8 }, + { 0x900f7, 0x01e8 }, + { 0x900f8, 0x68 }, + { 0x900f9, 0x0798 }, + { 0x900fa, 0x016a }, + { 0x900fb, 0x78 }, + { 0x900fc, 0x07a0 }, + { 0x900fd, 0x016a }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x0790 }, + { 0x90100, 0x016a }, + { 0x90101, 8 }, + { 0x90102, 0x8b10 }, + { 0x90103, 0x0168 }, + { 0x90104, 8 }, + { 0x90105, 0xab10 }, + { 0x90106, 0x0168 }, + { 0x90107, 0x0a }, + { 0x90108, 0x0408 }, + { 0x90109, 0x0169 }, + { 0x9010a, 0x58 }, + { 0x9010b, 0 }, + { 0x9010c, 0x68 }, + { 0x9010d, 0 }, + { 0x9010e, 0x0408 }, + { 0x9010f, 0x0169 }, + { 0x90110, 0 }, + { 0x90111, 0x8b10 }, + { 0x90112, 0x0168 }, + { 0x90113, 0 }, + { 0x90114, 0xab10 }, + { 0x90115, 0x0168 }, + { 0x90116, 0 }, + { 0x90117, 0x01d8 }, + { 0x90118, 0x0169 }, + { 0x90119, 0x80 }, + { 0x9011a, 0x0790 }, + { 0x9011b, 0x016a }, + { 0x9011c, 0x18 }, + { 0x9011d, 0x07aa }, + { 0x9011e, 0x6a }, + { 0x9011f, 0x0a }, + { 0x90120, 0 }, + { 0x90121, 0x01e9 }, + { 0x90122, 8 }, + { 0x90123, 0x8080 }, + { 0x90124, 0x0108 }, + { 0x90125, 0x0f }, + { 0x90126, 0x0408 }, + { 0x90127, 0x0169 }, + { 0x90128, 0x0c }, + { 0x90129, 0 }, + { 0x9012a, 0x68 }, + { 0x9012b, 9 }, + { 0x9012c, 0 }, + { 0x9012d, 0x01a9 }, + { 0x9012e, 0 }, + { 0x9012f, 0x0408 }, + { 0x90130, 0x0169 }, + { 0x90131, 0 }, + { 0x90132, 0x8080 }, + { 0x90133, 0x0108 }, + { 0x90134, 8 }, + { 0x90135, 0x07aa }, + { 0x90136, 0x6a }, + { 0x90137, 0 }, + { 0x90138, 0x8568 }, + { 0x90139, 0x0108 }, + { 0x9013a, 0xb7 }, + { 0x9013b, 0x0790 }, + { 0x9013c, 0x016a }, + { 0x9013d, 0x1f }, + { 0x9013e, 0 }, + { 0x9013f, 0x68 }, + { 0x90140, 8 }, + { 0x90141, 0x8558 }, + { 0x90142, 0x0168 }, + { 0x90143, 0x0f }, + { 0x90144, 0x0408 }, + { 0x90145, 0x0169 }, + { 0x90146, 0x0c }, + { 0x90147, 0 }, + { 0x90148, 0x68 }, + { 0x90149, 0 }, + { 0x9014a, 0x0408 }, + { 0x9014b, 0x0169 }, + { 0x9014c, 0 }, + { 0x9014d, 0x8558 }, + { 0x9014e, 0x0168 }, + { 0x9014f, 8 }, + { 0x90150, 0x03c8 }, + { 0x90151, 0x01a9 }, + { 0x90152, 3 }, + { 0x90153, 0x0370 }, + { 0x90154, 0x0129 }, + { 0x90155, 0x20 }, + { 0x90156, 0x02aa }, + { 0x90157, 9 }, + { 0x90158, 0 }, + { 0x90159, 0x0400 }, + { 0x9015a, 0x010e }, + { 0x9015b, 8 }, + { 0x9015c, 0xe8 }, + { 0x9015d, 0x0109 }, + { 0x9015e, 0 }, + { 0x9015f, 0x8140 }, + { 0x90160, 0x010c }, + { 0x90161, 0x10 }, + { 0x90162, 0x8138 }, + { 0x90163, 0x010c }, + { 0x90164, 8 }, + { 0x90165, 0x07c8 }, + { 0x90166, 0x0101 }, + { 0x90167, 8 }, + { 0x90168, 0 }, + { 0x90169, 8 }, + { 0x9016a, 8 }, + { 0x9016b, 0x0448 }, + { 0x9016c, 0x0109 }, + { 0x9016d, 0x0f }, + { 0x9016e, 0x07c0 }, + { 0x9016f, 0x0109 }, + { 0x90170, 0 }, + { 0x90171, 0xe8 }, + { 0x90172, 0x0109 }, + { 0x90173, 0x47 }, + { 0x90174, 0x0630 }, + { 0x90175, 0x0109 }, + { 0x90176, 8 }, + { 0x90177, 0x0618 }, + { 0x90178, 0x0109 }, + { 0x90179, 8 }, + { 0x9017a, 0xe0 }, + { 0x9017b, 0x0109 }, + { 0x9017c, 0 }, + { 0x9017d, 0x07c8 }, + { 0x9017e, 0x0109 }, + { 0x9017f, 8 }, + { 0x90180, 0x8140 }, + { 0x90181, 0x010c }, + { 0x90182, 0 }, + { 0x90183, 1 }, + { 0x90184, 8 }, + { 0x90185, 8 }, + { 0x90186, 4 }, + { 0x90187, 8 }, + { 0x90188, 8 }, + { 0x90189, 0x07c8 }, + { 0x9018a, 0x0101 }, + { 0x90006, 0 }, + { 0x90007, 0 }, + { 0x90008, 8 }, + { 0x90009, 0 }, + { 0x9000a, 0 }, + { 0x9000b, 0 }, + { 0xd00e7, 0x0400 }, + { 0x90017, 0 }, + { 0x9001f, 0x2a }, + { 0x90026, 0x6a }, + { 0x400d0, 0 }, + { 0x400d1, 0x0101 }, + { 0x400d2, 0x0105 }, + { 0x400d3, 0x0107 }, + { 0x400d4, 0x010f }, + { 0x400d5, 0x0202 }, + { 0x400d6, 0x020a }, + { 0x400d7, 0x020b }, + { 0x2003a, 2 }, + { 0x2000b, 0x64 }, + { 0x2000c, 0xc8 }, + { 0x2000d, 0x07d0 }, + { 0x2000e, 0x2c }, + { 0x12000b, 0x14 }, + { 0x12000c, 0x29 }, + { 0x12000d, 0x01a1 }, + { 0x12000e, 0x10 }, + { 0x9000c, 0 }, + { 0x9000d, 0x0173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x60 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x400fd, 0x0f }, + { 0x10011, 1 }, + { 0x10012, 1 }, + { 0x10013, 0x0180 }, + { 0x10018, 1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 1 }, + { 0x101b4, 1 }, + { 0x102b4, 1 }, + { 0x103b4, 1 }, + { 0x104b4, 1 }, + { 0x105b4, 1 }, + { 0x106b4, 1 }, + { 0x107b4, 1 }, + { 0x108b4, 1 }, + { 0x11011, 1 }, + { 0x11012, 1 }, + { 0x11013, 0x0180 }, + { 0x11018, 1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 1 }, + { 0x111b4, 1 }, + { 0x112b4, 1 }, + { 0x113b4, 1 }, + { 0x114b4, 1 }, + { 0x115b4, 1 }, + { 0x116b4, 1 }, + { 0x117b4, 1 }, + { 0x118b4, 1 }, + { 0x12011, 1 }, + { 0x12012, 1 }, + { 0x12013, 0x0180 }, + { 0x12018, 1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 1 }, + { 0x121b4, 1 }, + { 0x122b4, 1 }, + { 0x123b4, 1 }, + { 0x124b4, 1 }, + { 0x125b4, 1 }, + { 0x126b4, 1 }, + { 0x127b4, 1 }, + { 0x128b4, 1 }, + { 0x13011, 1 }, + { 0x13012, 1 }, + { 0x13013, 0x0180 }, + { 0x13018, 1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 1 }, + { 0x131b4, 1 }, + { 0x132b4, 1 }, + { 0x133b4, 1 }, + { 0x134b4, 1 }, + { 0x135b4, 1 }, + { 0x136b4, 1 }, + { 0x137b4, 1 }, + { 0x138b4, 1 }, + { 0x2003a, 2 }, + { 0xc0080, 2 }, + { 0xd0000, 1 } +}; + +static struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { + { + /* P0 3200mts 1D */ + .drate = 3200, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg), + }, + { + /* P1 667mts 1D */ + .drate = 667, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg), + }, + { + /* P0 3200mts 2D */ + .drate = 3200, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg), + }, +}; + +/* ddr timing config params */ +struct dram_timing_info dram_timing_ch2 = { + .ddrc_cfg = lpddr4_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg), + .ddrphy_cfg = lpddr4_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg), + .fsp_msg = lpddr4_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg), + .ddrphy_pie = lpddr4_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie), + .fsp_table = { 3200, 667, }, +}; diff --git a/board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h b/board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h new file mode 100644 index 0000000..a55086b --- /dev/null +++ b/board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h @@ -0,0 +1,95 @@ +/* + * Copyright Boundary Devices + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <config.h> +#include <linux/kernel.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +/* MNT Reform2 */ +#define CFG_DDR_MB 4096 +#define CFG_DDR_RANK_BITS 1 +#define CFG_DDR_CHANNEL_CNT 2 + +#ifdef WR_POST_EXT_3200 +#define CH2_VAL_INIT4 ((LPDDR4_MR3 << 16) | 0x00020008) +#else +#define CH2_VAL_INIT4 ((LPDDR4_MR3 << 16) | 8) +#endif + +#if CFG_DDR_MB == 1024 + /* Address map is from MSB 28: r14, r13-r0, b2-b0, c9-c0 */ +#define CH2_VAL_DDRC_ADDRMAP0_R0 0x0000001F +#define CH2_VAL_DDRC_ADDRMAP6_R0 0x0F070707 + +#elif CFG_DDR_MB == 2048 + /* Address map is from MSB 28: r15, r14, r13-r0, b2-b0, c9-c0 */ +#define CH2_VAL_DDRC_ADDRMAP0_R0 0x0000001F +#define CH2_VAL_DDRC_ADDRMAP6_R0 0x07070707 + /* Address map is from MSB 28: cs, r14, r13-r0, b2-b0, c9-c0 */ +#define CH2_VAL_DDRC_ADDRMAP0_R1 0x00000016 +#define CH2_VAL_DDRC_ADDRMAP6_R1 0x0F070707 + +#elif CFG_DDR_MB == 3072 + /* Address map is from MSB 29: r15, r14, cs, r13-r0, b2-b0, c9-c0 */ +#define CH2_VAL_DDRC_ADDRMAP0_R1 0x00000015 +#define CH2_VAL_DDRC_ADDRMAP6_R1 0x48080707 + +#elif CFG_DDR_MB == 4096 + /* Address map is from MSB 29: cs, r15, r14, r13-r0, b2-b0, c9-c0 */ +#define CH2_VAL_DDRC_ADDRMAP0_R1 0x00000017 +#define CH2_VAL_DDRC_ADDRMAP6_R1 0x07070707 +#else +#error unsupported memory size +#endif + +#define LPDDR4_CS_R0 0x1 /* 0 rank bits, 1 chip select */ +#define LPDDR4_CS_R1 0x3 /* 1 rank bit, 2 chip selects */ + +#if (CFG_DDR_RANK_BITS == 0) || !defined(CH2_VAL_DDRC_ADDRMAP0_R1) +#ifdef CH2_VAL_DDRC_ADDRMAP0_R0 +#define CH2_LPDDR4_CS LPDDR4_CS_R0 +#define CH2_VAL_DDRC_ADDRMAP0 CH2_VAL_DDRC_ADDRMAP0_R0 +#define CH2_VAL_DDRC_ADDRMAP6 CH2_VAL_DDRC_ADDRMAP6_R0 +#else +#error unsupported memory rank/size +#endif +/* + * rank0 will succeed, even if really rank 1, so we need + * to probe memory if rank0 succeeds + */ +#if defined(CH2_VAL_DDRC_ADDRMAP0_R0) && defined(CH2_VAL_DDRC_ADDRMAP0_R1) +#define CH2_LPDDR4_CS_NEW LPDDR4_CS_R1 +#define CH2_VAL_DDRC_ADDRMAP0_NEW CH2_VAL_DDRC_ADDRMAP0_R1 +#define CH2_VAL_DDRC_ADDRMAP6_NEW CH2_VAL_DDRC_ADDRMAP6_R1 +#endif + +#elif (CFG_DDR_RANK_BITS == 1) || !defined(CH2_VAL_DDRC_ADDRMAP0_R0) +#ifdef CH2_VAL_DDRC_ADDRMAP0_R1 +#define CH2_LPDDR4_CS LPDDR4_CS_R1 +#define CH2_VAL_DDRC_ADDRMAP0 CH2_VAL_DDRC_ADDRMAP0_R1 +#define CH2_VAL_DDRC_ADDRMAP6 CH2_VAL_DDRC_ADDRMAP6_R1 +#else +#error unsupported memory rank/size +#endif + +#if defined(CH2_VAL_DDRC_ADDRMAP0_R0) && defined(CH2_VAL_DDRC_ADDRMAP0_R1) +#define CH2_LPDDR4_CS_NEW LPDDR4_CS_R0 +#define CH2_VAL_DDRC_ADDRMAP0_NEW CH2_VAL_DDRC_ADDRMAP0_R0 +#define CH2_VAL_DDRC_ADDRMAP6_NEW CH2_VAL_DDRC_ADDRMAP6_R0 +#endif + +#else +#error unsupported rank bits +#endif + +#if (CFG_DDR_CHANNEL_CNT == 2) +#if (CFG_DDR_RANK_BITS == 0) && !defined(CH2_VAL_DDRC_ADDRMAP0_R0) +#error unsupported options +#endif +#if (CFG_DDR_RANK_BITS == 1) && !defined(CH2_VAL_DDRC_ADDRMAP0_R1) +#error unsupported options +#endif +#endif diff --git a/board/mntre/imx8mq_reform2/spl.c b/board/mntre/imx8mq_reform2/spl.c new file mode 100644 index 0000000..21fad49 --- /dev/null +++ b/board/mntre/imx8mq_reform2/spl.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <hang.h> +#include <image.h> +#include <init.h> +#include <log.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/ddr.h> +#include <asm/arch/imx8mq_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <fsl_esdhc_imx.h> +#include <mmc.h> +#include <linux/delay.h> +#include <power/pmic.h> +#include <spl.h> + +DECLARE_GLOBAL_DATA_PTR; + +extern struct dram_timing_info dram_timing_ch2; + +static void spl_dram_init(void) +{ + ddr_init(&dram_timing_ch2); +} + +#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +static struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = IMX8MQ_PAD_I2C1_SCL__I2C1_SCL | PC, + .gpio_mode = IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14 | PC, + .gp = IMX_GPIO_NR(5, 14), + }, + .sda = { + .i2c_mode = IMX8MQ_PAD_I2C1_SDA__I2C1_SDA | PC, + .gpio_mode = IMX8MQ_PAD_I2C1_SDA__GPIO5_IO15 | PC, + .gp = IMX_GPIO_NR(5, 15), + }, +}; + +#define USDHC2_VSEL IMX_GPIO_NR(1, 8) +#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 12) +#define USDHC1_PWR_GPIO IMX_GPIO_NR(2, 10) + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = 1; + break; + case USDHC2_BASE_ADDR: + ret = !gpio_get_value(USDHC2_CD_GPIO); + return ret; + } + + return 1; +} + +#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | \ + PAD_CTL_FSEL2) +#define USDHC_GPIO_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_DSE1) + +static iomux_v3_cfg_t const usdhc1_pads[] = { + IMX8MQ_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA4__USDHC1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA5__USDHC1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA7__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_RESET_B__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc2_pads[] = { + IMX8MQ_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0x16 */ + IMX8MQ_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_CD_B__GPIO2_IO12 | MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL), + IMX8MQ_PAD_GPIO1_IO08__GPIO1_IO8 | MUX_PAD_CTRL(0x91), +}; + +static struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC1_BASE_ADDR, 0, 8}, + {USDHC2_BASE_ADDR, 0, 4}, +}; + +int board_mmc_init(struct bd_info *bis) +{ + int i, ret; + /* + * According to the board_mmc_init() the following map is done: + * (U-Boot device node) (Physical Port) + * mmc0 USDHC1 + * mmc1 USDHC2 + */ + for (i = 0; i < CFG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + init_clk_usdhc(0); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(USDHC1_CLK_ROOT); + imx_iomux_v3_setup_multiple_pads(usdhc1_pads, + ARRAY_SIZE(usdhc1_pads)); + gpio_request(USDHC1_PWR_GPIO, "usdhc1_reset"); + gpio_direction_output(USDHC1_PWR_GPIO, 0); + udelay(500); + gpio_direction_output(USDHC1_PWR_GPIO, 1); + break; + case 1: + init_clk_usdhc(1); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(USDHC2_CLK_ROOT); + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, + ARRAY_SIZE(usdhc2_pads)); + gpio_request(USDHC2_VSEL, "usdhc2_vsel"); + gpio_direction_output(USDHC2_VSEL, 0); + break; + default: + printf("Warning: you configured more USDHC controllers(%d) than supported by the board\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) + return ret; + } + + return 0; +} + +#define I2C1_PCA9546_RESET IMX_GPIO_NR(1, 4) +#define ARM_DRAM_VSEL IMX_GPIO_NR(3, 24) +#define DRAM_1P1_VSEL IMX_GPIO_NR(2, 11) +#define SOC_GPU_VPU_VSEL IMX_GPIO_NR(2, 20) + +#define I2C_MUX_ADDR 0x70 +#define I2C_FAN53555_ADDR 0x60 + +static iomux_v3_cfg_t const power_pads[] = { + IMX8MQ_PAD_GPIO1_IO04__GPIO1_IO4 | MUX_PAD_CTRL(0x46), +}; + +int power_init_board(void) +{ + uint8_t val; + + imx_iomux_v3_setup_multiple_pads(power_pads, + ARRAY_SIZE(usdhc2_pads)); + + /* Release I2C multiplexer reset */ + gpio_request(I2C1_PCA9546_RESET, "pca9546_reset"); + gpio_direction_output(I2C1_PCA9546_RESET, 1); + + /* Select VSEL0 on voltage regulators */ + gpio_request(ARM_DRAM_VSEL, "arm_dram_vsel"); + gpio_direction_output(ARM_DRAM_VSEL, 0); + gpio_request(DRAM_1P1_VSEL, "dram_1p1_vsel"); + gpio_direction_output(DRAM_1P1_VSEL, 0); + gpio_request(SOC_GPU_VPU_VSEL, "soc_gpu_vpu_vsel"); + gpio_direction_output(SOC_GPU_VPU_VSEL, 0); + + /* Set mux to target ARM/DRAM regulator */ + i2c_write(I2C_MUX_ADDR, 1, 1, NULL, 0); + /* .6 + .40 = 1.00 */ + val = 0x80 + 40; + i2c_write(I2C_FAN53555_ADDR, 0, 1, &val, 1); + i2c_write(I2C_FAN53555_ADDR, 1, 1, &val, 1); + + /* Set mux to target DRAM regulator */ + i2c_write(I2C_MUX_ADDR, 2, 1, NULL, 0); + /* .6 + .50 = 1.10 */ + val = 0x80 + 50; + i2c_write(I2C_FAN53555_ADDR, 0, 1, &val, 1); + i2c_write(I2C_FAN53555_ADDR, 1, 1, &val, 1); + + /* Set mux to target SoC/GPU/VPU regulator */ + i2c_write(I2C_MUX_ADDR, 4, 1, NULL, 0); + /* .6 + .30 = .90 */ + val = 0x80 + 30; + i2c_write(I2C_FAN53555_ADDR, 0, 1, &val, 1); + i2c_write(I2C_FAN53555_ADDR, 1, 1, &val, 1); + + /* Set mux to target peripherals */ + i2c_write(I2C_MUX_ADDR, 8, 1, NULL, 0); + + return 0; +} + +void spl_board_init(void) +{ + puts("Normal Boot\n"); +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif + +void board_init_f(ulong dummy) +{ + int ret; + + /* Clear global data */ + memset((void *)gd, 0, sizeof(gd_t)); + + arch_cpu_init(); + + init_uart_clk(0); + + board_early_init_f(); + + timer_init(); + + preloader_console_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + ret = spl_init(); + if (ret) { + debug("spl_init() failed: %d\n", ret); + hang(); + } + + enable_tzc380(); + + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + + power_init_board(); + + /* DDR initialization */ + spl_dram_init(); + + board_init_r(NULL, 0); +} diff --git a/board/storopack/smegw01/Kconfig b/board/storopack/smegw01/Kconfig index d8f2469..390214c 100644 --- a/board/storopack/smegw01/Kconfig +++ b/board/storopack/smegw01/Kconfig @@ -12,4 +12,11 @@ config SYS_CONFIG_NAME config IMX_CONFIG default "board/storopack/smegw01/imximage.cfg" +config SYS_BOOT_LOCKED + bool "Lock boot process to EMMC" + default y + help + Say N here if you want to boot from eMMC and SD. + Say Y to boot from eMMC. + endif diff --git a/board/storopack/smegw01/smegw01.c b/board/storopack/smegw01/smegw01.c index e6bff80..20c0970 100644 --- a/board/storopack/smegw01/smegw01.c +++ b/board/storopack/smegw01/smegw01.c @@ -14,9 +14,11 @@ #include <asm/io.h> #include <common.h> #include <env.h> +#include <env_internal.h> #include <asm/arch/crm_regs.h> #include <asm/setup.h> #include <asm/bootm.h> +#include <mmc.h> DECLARE_GLOBAL_DATA_PTR; @@ -80,6 +82,7 @@ int board_init(void) int board_late_init(void) { struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + unsigned char eth1addr[6]; imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); @@ -91,5 +94,35 @@ int board_late_init(void) */ clrsetbits_le16(&wdog->wcr, 0, 0x10); + /* Get the second MAC address */ + imx_get_mac_from_fuse(1, eth1addr); + if (!env_get("eth1addr") && is_valid_ethaddr(eth1addr)) + eth_env_set_enetaddr("eth1addr", eth1addr); + return 0; } + +uint board_mmc_get_env_part(struct mmc *mmc) +{ + uint part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config); + + if (part == 7) + part = 0; + return part; +} + +enum env_location env_get_location(enum env_operation op, int prio) +{ + if (op == ENVOP_SAVE || op == ENVOP_ERASE) + return ENVL_MMC; + + switch (prio) { + case 0: + return ENVL_NOWHERE; + + case 1: + return ENVL_MMC; + } + + return ENVL_UNKNOWN; +} diff --git a/board/storopack/smegw01/smegw01.env b/board/storopack/smegw01/smegw01.env new file mode 100644 index 0000000..25bc7cd --- /dev/null +++ b/board/storopack/smegw01/smegw01.env @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0+ +#ifdef CONFIG_SYS_BOOT_LOCKED +#define SETUP_BOOT_MENU setup_boot_menu=setenv bootmenu_0 eMMC=run bootcmd +#else +#define SETUP_BOOT_MENU setup_boot_menu= \ + if test "${mmcdev}" = 1; then \ + setenv emmc_priority 0; \ + setenv sd_priority 1; \ + else setenv emmc_priority 1; \ + setenv sd_priority 0; \ + fi; \ + setenv bootmenu_${emmc_priority} eMMC=run boot_emmc; \ + setenv bootmenu_${sd_priority} SD=run boot_sd; +#endif + +altbootcmd= + echo Performing rollback...; + if test "${mmcpart_committed}" = 1; then + setenv mmcpart 2; + setenv mmcpart_committed 2; + else + setenv mmcpart 1; + setenv mmcpart_committed 1; + fi; + setenv bootcount 0; + setenv upgrade_available; + setenv ustate 3; + saveenv; + run bootcmd; +boot_emmc=setenv mmcdev_wanted 1; run persist_mmcdev; run bootcmd; +boot_sd=setenv mmcdev_wanted 0; run persist_mmcdev; run bootcmd; +bootcmd=run finduuid; run distro_bootcmd +bootdelay=2 +bootlimit=3 +bootm_size=0x10000000 +commit_mmc= + if test "${ustate}" = 1 -a "${mmcpart}" != "${mmcpart_committed}"; then + setenv mmcpart_committed ${mmcpart}; + saveenv; + fi; +console=ttymxc0 +fdt_addr=0x83000000 +fdtfile=imx7d-smegw01.dtb +fit_addr=0x88000000 +image=fitImage +loadaddr=0x80800000 +loadbootpart=mmc partconf 1 boot_part +loadimage=load mmc ${mmcdev}:${gpt_partition_entry} ${fit_addr} boot/${image} +loadpart=gpt setenv mmc ${mmcdev} rootfs-${mmcpart_committed} +mmcargs= + setenv bootargs console=${console},${baudrate} root=/dev/mmcblk${mmcdev}p${gpt_partition_entry} rootwait rw SM_ROOT_DEV=${mmcdev} SM_ROOT_PART=${gpt_partition_entry} SM_BOOT_PART=${boot_part} +mmcboot= + echo Booting...; + echo mmcdev: ${mmcdev}; + run commit_mmc; + echo mmcpart: ${mmcpart_committed}; + run loadpart; + echo gptpart: ${gpt_partition_entry}; + run loadbootpart; + if run loadimage; then + ; + else + run altbootcmd; + fi; + run mmcargs; + if bootm ${fit_addr}; then + ; + else + run altbootcmd; + fi; +mmcdev=1 +mmcpart=1 +mmcpart_committed=1 +persist_mmcdev= + if test "${mmcdev}" != "${mmcdev_wanted}"; then + setenv mmcdev "${mmcdev_wanted}"; + saveenv; + fi; +setup_boot_menu= + if test "${mmcdev}" = 1; then + setenv emmc_priority 0; + setenv sd_priority 1; + else + setenv emmc_priority 1; + setenv sd_priority 0; + fi; + setenv bootmenu_${emmc_priority} eMMC=run boot_emmc; + setenv bootmenu_${sd_priority} SD=run boot_sd; +SETUP_BOOT_MENU diff --git a/common/Kconfig b/common/Kconfig index f2783ee..6345d5c 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -559,7 +559,7 @@ config BOARD_TYPES config DISPLAY_CPUINFO bool "Display information about the CPU during start up" - default y if ARC|| ARM || NIOS2 || X86 || XTENSA || M68K + default y if ARC || ARM || NIOS2 || X86 || XTENSA || M68K help Display information about the CPU that U-Boot is running on when U-Boot starts up. The function print_cpuinfo() is called diff --git a/configs/imx8mq_reform2_defconfig b/configs/imx8mq_reform2_defconfig new file mode 100644 index 0000000..9b14a1b --- /dev/null +++ b/configs/imx8mq_reform2_defconfig @@ -0,0 +1,107 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8M=y +CONFIG_TEXT_BASE=0x40200000 +CONFIG_SYS_MALLOC_LEN=0x600000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="imx8mq-mnt-reform2" +CONFIG_SPL_TEXT_BASE=0x7E1000 +CONFIG_TARGET_IMX8MQ_REFORM2=y +CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SPL_MMC=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL=y +CONFIG_IMX_BOOTAUX=y +CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_REMAKE_ELF=y +CONFIG_SYS_MONITOR_LEN=524288 +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_SPL_LOAD_FIT=y +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_PREBOOT=y +CONFIG_DEFAULT_FDT_FILE="freescale/imx8mq-mnt-reform2.dtb" +CONFIG_CONSOLE_MUX=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x180000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x187ff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_CLK=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +# CONFIG_CMD_MDIO is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=1 +CONFIG_USE_ETHPRIME=y +CONFIG_ETHPRIME="FEC" +CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_FSL_USDHC=y +CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_PHY_GIGE=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PHY=y +CONFIG_PHY_IMX8MQ_USB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_SPL_POWER_LEGACY=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8M_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPL_POWER_I2C=y +CONFIG_DM_RESET=y +CONFIG_DM_SERIAL=y +CONFIG_MXC_UART=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_KEYBOARD=y diff --git a/configs/imx8qm_dmsse20a1_defconfig b/configs/imx8qm_dmsse20a1_defconfig new file mode 100644 index 0000000..3341b5e --- /dev/null +++ b/configs/imx8qm_dmsse20a1_defconfig @@ -0,0 +1,129 @@ +CONFIG_ARM=y +CONFIG_SPL_SYS_ICACHE_OFF=y +CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_ARCH_IMX8=y +CONFIG_TEXT_BASE=0x80020000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=4 +CONFIG_SYS_MALLOC_LEN=0x2800000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_MMC_IMG_LOAD_PART=0 +CONFIG_TARGET_IMX8QM_DMSSE20_A1=y +CONFIG_SPL_MMC=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_ENV_OFFSET=0x80000 +CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_SPL=y +CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_SYS_MEMTEST_START=0xA0000000 +CONFIG_SYS_MEMTEST_END=0xC0000000 +CONFIG_REMAKE_ELF=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_CONTROL=y +CONFIG_CI_UDC=y +CONFIG_DM_PCA953X=y +CONFIG_EVENT=y +CONFIG_DM_EVENT=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" +CONFIG_LOG=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_BSS_START_ADDR=0x00128000 +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_POWER_DOMAIN=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SYS_BOOTM_LEN=0x04000000 +CONFIG_HUSH_PARSER=y +CONFIG_IMX_BOOTAUX=y +CONFIG_FS_FAT=y +CONFIG_FS_EXT4=y +# CONFIG_BOOTM_NETBSD is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_DM_MMC=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_MMC_BROKEN_CD=y +CONFIG_CMD_SF=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FUSE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx8qm-dmsse20-a1" +CONFIG_ENV_SOURCE_FILE="imx8qm_dmsse20-a1" +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SYS_MMC_ENV_DEV=2 +CONFIG_SYS_MMC_ENV_PART=0 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_SPL_DM=y +CONFIG_SPL_CLK=y +CONFIG_CLK_IMX8=y +CONFIG_CPU=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_FSL_ESDHC_IMX=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_FSL_USDHC=y +CONFIG_PHYLIB=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_ATHEROS=y +CONFIG_PHY_GIGE=y +CONFIG_DM_ETH=y +# CONFIG_EFI_LOADER is not set +CONFIG_FEC_MXC_SHARE_MDIO=y +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 +CONFIG_FEC_MXC=y +CONFIG_FEC1_ENET_DEV=0 +CONFIG_ETHPRIME="eth0" +CONFIG_FEC1_MXC_PHYADDR=0x4 +CONFIG_FEC2_ENET_DEV=1 +CONFIG_ETHPRIME1="eth1" +CONFIG_FEC2_MXC_PHYADDR=0x4 +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8_POWER_DOMAIN=y +CONFIG_IMX_SMMU=y +CONFIG_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPL_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_BAUDRATE=115200 +CONFIG_MISC=y +CONFIG_SMC_FUSE=y +CONFIG_BOOTAUX_RESERVED_MEM_BASE=0x88000000 +CONFIG_BOOTAUX_RESERVED_MEM_SIZE=0x08000000 +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_TINY_MEMSET=y +CONFIG_AHAB_BOOT=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_DM_RTC=y +CONFIG_RTC_RV8803=y +CONFIG_CMD_DATE=y diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig index dcee179..4e60159 100644 --- a/configs/pico-imx6ul_defconfig +++ b/configs/pico-imx6ul_defconfig @@ -76,6 +76,7 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_USB=y CONFIG_USB_MAX_CONTROLLER_COUNT=2 diff --git a/configs/smegw01_defconfig b/configs/smegw01_defconfig index 1e0b9aa..3d2713f 100644 --- a/configs/smegw01_defconfig +++ b/configs/smegw01_defconfig @@ -7,6 +7,7 @@ CONFIG_ENV_OFFSET=0x100000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx7d-smegw01" CONFIG_TARGET_SMEGW01=y +# CONFIG_SYS_BOOT_LOCKED is not set CONFIG_ENV_OFFSET_REDUND=0x110000 CONFIG_ARMV7_BOOT_SEC_DEFAULT=y # CONFIG_ARMV7_VIRT is not set @@ -17,19 +18,27 @@ CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0xa0000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_AUTOBOOT_MENU_SHOW=y +# CONFIG_BOOTSTD is not set +# CONFIG_CMD_BOOTEFI_BOOTMGR is not set +CONFIG_BOOTMENU_DISABLE_UBOOT_CONSOLE=y CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="if run loadimage; then run mmcboot; fi; " +CONFIG_BOOTCOMMAND="if test \"${bootcount}\" -gt \"${bootlimit}\"; then run altbootcmd; else if test \"${ustate}\" = 1; then setenv upgrade_available 1; saveenv; fi; run mmcboot; fi;" +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="run setup_boot_menu;" CONFIG_HUSH_PARSER=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_DHCP=y @@ -38,13 +47,20 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y +CONFIG_CMD_SQUASHFS=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_NOWHERE=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=1 +CONFIG_ENV_WRITEABLE_LIST=y +CONFIG_ENV_ACCESS_IGNORE_FORCE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_BOUNCE_BUFFER=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y CONFIG_DFU_MMC=y CONFIG_DM_I2C=y CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/doc/board/advantech/imx8qm-dmsse20-a1.rst b/doc/board/advantech/imx8qm-dmsse20-a1.rst new file mode 100644 index 0000000..b83e678 --- /dev/null +++ b/doc/board/advantech/imx8qm-dmsse20-a1.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +NXP i.MX8QM DMSSE20-a1 board +============================ + +Quick Start +----------- + +- Build the ARM Trusted firmware binary +- Get scfw_tcm.bin and ahab-container.img +- Get imx-mkimage +- Build U-Boot +- Flash the binary into the SD card +- Boot + +Get and Build the ARM Trusted Firmware +-------------------------------------- + +.. code-block:: bash + + $ git clone https://github.com/nxp-imx/imx-atf + $ cd imx-atf/ + $ git checkout lf-5.10.72-2.2.0 -b lf-5.10.72-2.2.0 + $ make PLAT=imx8qm bl31 + $ cp build/imx8qm/release/bl31.bin $(builddir) + +Get scfw_tcm.bin and ahab-container.img +--------------------------------------- + +.. code-block:: bash + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.11.0.bin + $ chmod +x imx-sc-firmware-1.11.0.bin + $ ./imx-sc-firmware-1.11.0.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.8.5.bin + $ chmod +x imx-seco-3.8.5.bin + $ ./imx-seco-3.8.5.bin + +Or use this to avoid running random scripts from the internet, +but note that you must agree to the license the script displays: + +.. code-block:: bash + + $ dd if=imx-sc-firmware-1.11.0.bin of=imx-sc-firmware-1.11.0.tar.bz2 bs=42757 skip=1 + $ tar -xf imx-sc-firmware-1.11.0.tar.bz2 + $ cp imx-sc-firmware-1.11.0/mx8qm-val-scfw-tcm.bin $(builddir) + $ dd if=imx-seco-3.8.5.bin of=imx-seco-3.8.5.tar.bz2 bs=43978 skip=1 + $ tar -xf imx-seco-3.8.5.tar.bz2 + $ cp imx-seco-3.8.5/firmware/seco/mx8qmb0-ahab-container.img $(builddir) + +Build U-Boot +------------ +.. code-block:: bash + + $ export ATF_LOAD_ADDR=0x80000000 + $ export BL33_LOAD_ADDR=0x80020000 + $ make imx8qm_dmsse20a1_defconfig + $ make diff --git a/doc/board/advantech/index.rst b/doc/board/advantech/index.rst index e9b198c5..125b98c 100644 --- a/doc/board/advantech/index.rst +++ b/doc/board/advantech/index.rst @@ -7,3 +7,4 @@ Advantech :maxdepth: 2 imx8qm-rom7720-a1.rst + imx8qm-dmsse20-a1.rst diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 91633f0..fae2083 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -703,6 +703,10 @@ static int ehci_usb_probe(struct udevice *dev) usb_internal_phy_clock_gate(priv->phy_addr, 1); usb_phy_enable(ehci, priv->phy_addr); #endif +#else + ret = generic_setup_phy(dev, &priv->phy, 0); + if (ret) + goto err_regulator; #endif #if CONFIG_IS_ENABLED(DM_REGULATOR) @@ -725,12 +729,6 @@ static int ehci_usb_probe(struct udevice *dev) mdelay(10); -#if defined(CONFIG_PHY) - ret = generic_setup_phy(dev, &priv->phy, 0); - if (ret) - goto err_regulator; -#endif - hccr = (struct ehci_hccr *)((uintptr_t)&ehci->caplength); hcor = (struct ehci_hcor *)((uintptr_t)hccr + HC_LENGTH(ehci_readl(&(hccr)->cr_capbase))); diff --git a/include/configs/imx8mq_reform2.h b/include/configs/imx8mq_reform2.h new file mode 100644 index 0000000..3148e86 --- /dev/null +++ b/include/configs/imx8mq_reform2.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __IMX8M_REFORM2_H +#define __IMX8M_REFORM2_H + +#include <linux/sizes.h> +#include <linux/stringify.h> +#include <asm/arch/imx-regs.h> + +#ifdef CONFIG_SPL_BUILD +/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ + +/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ +#define CFG_MALLOC_F_ADDR 0x182000 +/* For RAW image gives a error info not panic */ +#endif + +/* ENET Config */ +/* ENET1 */ +#if defined(CONFIG_CMD_NET) +#define CFG_FEC_MXC_PHYADDR 4 +#endif + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +/* Initial environment variables */ +#define CFG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "image=Image\0" \ + "console=ttymxc0,115200\0" \ + "fdt_addr_r=0x43000000\0" \ + "ramdisk_addr_r=0x44000000\0" \ + "boot_fdt=try\0" \ + "fdtfile=imx8mq-mnt-reform2.dtb\0" \ + "initrd_addr=0x43800000\0" \ + "bootm_size=0x10000000\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ + "stdin=serial,usbkbd\0" + +/* Link Definitions */ + +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 + + +#define CFG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM 0x40000000 +#define PHYS_SDRAM_SIZE 0x100000000 /* 4 GiB DDR */ + +#define CFG_MXC_UART_BASE UART_BASE_ADDR(1) + +#define CFG_SYS_FSL_USDHC_NUM 2 +#define CFG_SYS_FSL_ESDHC_ADDR 0 + +#endif diff --git a/include/configs/imx8qm_dmsse20.h b/include/configs/imx8qm_dmsse20.h new file mode 100644 index 0000000..f9cda5e --- /dev/null +++ b/include/configs/imx8qm_dmsse20.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017-2019 NXP + * Copyright 2019-2023 Kococonnector GmbH + */ + +#ifndef __IMX8QM_DMSSE20_H +#define __IMX8QM_DMSSE20_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +/* Flat Device Tree Definitions */ + +#define CFG_SYS_FSL_ESDHC_ADDR 0 +#define USDHC1_BASE_ADDR 0x5B010000 +#define USDHC2_BASE_ADDR 0x5B020000 +#define USDHC3_BASE_ADDR 0x5B030000 + +#define FEC_QUIRK_ENET_MAC + +#define IMX_FEC_BASE 0x5B040000 +/* FEC1 */ +#define IMX_FEC1_BASE 0x5B040000 +/* FEC2 */ +#define IMX_FEC2_BASE 0x5B050000 + +#ifdef CONFIG_NAND_BOOT +#define MFG_NAND_PARTITION "mtdparts=gpmi-nand:128m(boot),32m(kernel),16m(dtb),8m(misc),-(rootfs) " +#else +#define MFG_NAND_PARTITION "" +#endif + +/* Incorporate settings into the U-Boot environment */ +#define CFG_EXTRA_ENV_SETTINGS + +#define CFG_SYS_FSL_USDHC_NUM 2 + +#define CFG_SYS_SDRAM_BASE 0x080000000 +#define PHYS_SDRAM_1 0x080000000 +#define PHYS_SDRAM_2 0x880000000 +#define PHYS_SDRAM_1_SIZE 0x080000000 /* 2 GB */ +#define PHYS_SDRAM_2_SIZE 0x180000000 /* 6 GB */ + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ + +#endif /* __IMX8QM_DMSSE20_H */ diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index 1103174..0aa25f9 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -17,23 +17,25 @@ /* MMC Config*/ #define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CFG_EXTRA_ENV_SETTINGS \ - "image=zImage\0" \ - "console=ttymxc0\0" \ - "fdtfile=imx7d-smegw01.dtb\0" \ - "fdt_addr=0x83000000\0" \ - "bootm_size=0x10000000\0" \ - "mmcdev=0\0" \ - "mmcpart=1\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/mmcblk0p${mmcpart} rootwait rw\0" \ - "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \ - "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "fi;\0" \ +/* default to no extra bootparams, we need an empty define for stringification*/ +#ifndef EXTRA_BOOTPARAMS +#define EXTRA_BOOTPARAMS +#endif + +#ifdef CONFIG_SYS_BOOT_LOCKED +#define EXTRA_ENV_FLAGS +#else +#define EXTRA_ENV_FLAGS "mmcdev:dw," +#endif + +#define CFG_ENV_FLAGS_LIST_STATIC \ + "mmcpart:dw," \ + "mmcpart_committed:dw," \ + "ustate:dw," \ + "bootcount:dw," \ + "bootlimit:dw," \ + "upgrade_available:dw," \ + EXTRA_ENV_FLAGS /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |