diff options
-rw-r--r-- | doc/board/ti/am62px_sk.rst | 289 | ||||
-rw-r--r-- | doc/board/ti/k3.rst | 1 |
2 files changed, 290 insertions, 0 deletions
diff --git a/doc/board/ti/am62px_sk.rst b/doc/board/ti/am62px_sk.rst new file mode 100644 index 0000000..1f2982c --- /dev/null +++ b/doc/board/ti/am62px_sk.rst @@ -0,0 +1,289 @@ +.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +.. sectionauthor:: Bryan Brattlof <bb@ti.com> + +AM62Px Platforms +================ + +The AM62Px is an extension of the existing Sitara AM62x low-cost family +of application processors built for Automotive and Linux Application +development. Scalable Arm Cortex-A53 performance and embedded features, +such as: multi high-definition display support, 3D-graphics +acceleration, 4K video acceleration, and extensive peripherals make the +AM62Px well-suited for a broad range of automation and industrial +application, including automotive digital instrumentation, automotive +displays, industrial HMI, and more. + +Some highlights of AM62P SoC are: + +* Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster. + Dual/Single core variants are provided in the same package to allow HW + compatible designs. + +* One Device manager Cortex-R5F for system power and resource + management, and one Cortex-R5F for Functional Safety or + general-purpose usage. + +* One 3D GPU up to 50 GLFOPS + +* H.264/H.265 Video Encode/Decode. + +* Display support: 3x display support over OLDI/LVDS (1x OLDI-DL, 1x or + 2x OLDI-SL), DSI, or DPI. Up to 3840x1080 @ 60fps resolution + +* Integrated Giga-bit Ethernet switch supporting up to a total of two + external ports (TSN capable). + +* 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3xMMC and SD, GPMC for + NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio, + 1xCSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals. + +* Dedicated Centralized Hardware Security Module with support for secure + boot, debug security and crypto acceleration and trusted execution + environment. + +* One 32-bit DDR Subsystem that supports LPDDR4, DDR4 memory types. + +* Multiple low power modes support, ex: Deep sleep, Standby, MCU-only, + enabling battery powered system design. + +For those interested, more details about this SoC can be found in the +Technical Reference Manual here: https://www.ti.com/lit/pdf/spruj83 + +Boot Flow: +---------- + +The bootflow is exactly the same as all SoCs in the am62xxx extended SoC +family. Below is the pictorial representation: + +.. image:: img/boot_diagram_k3_current.svg + :alt: Boot flow diagram + +- Here TIFS acts as master and provides all the critical services. R5/A53 + requests TIFS to get these services done as shown in the above diagram. + +Sources: +-------- + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_boot_sources + :end-before: .. k3_rst_include_end_boot_sources + +Build procedure: +---------------- + +0. Setup the environment variables: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_common_env_vars_desc + :end-before: .. k3_rst_include_end_common_env_vars_desc + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_board_env_vars_desc + :end-before: .. k3_rst_include_end_board_env_vars_desc + +Set the variables corresponding to this platform: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_common_env_vars_defn + :end-before: .. k3_rst_include_end_common_env_vars_defn + +.. code-block:: bash + + $ export UBOOT_CFG_CORTEXR=am62px_evm_r5_defconfig + $ export UBOOT_CFG_CORTEXA=am62px_evm_a53_defconfig + $ export TFA_BOARD=lite + $ # we dont use any extra TFA parameters + $ unset TFA_EXTRA_ARGS + $ export OPTEE_PLATFORM=k3-am62x + $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y" + +.. am62px_evm_rst_include_start_build_steps + +1. Trusted Firmware-A: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_tfa + :end-before: .. k3_rst_include_end_build_steps_tfa + + +2. OP-TEE: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_optee + :end-before: .. k3_rst_include_end_build_steps_optee + +3. U-Boot: + +* 3.1 R5: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_spl_r5 + :end-before: .. k3_rst_include_end_build_steps_spl_r5 + +* 3.2 A53: + +.. include:: ../ti/k3.rst + :start-after: .. k3_rst_include_start_build_steps_uboot + :end-before: .. k3_rst_include_end_build_steps_uboot +.. am62px_evm_rst_include_end_build_steps + +Target Images +-------------- + +In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC +variant (HS-FS, HS-SE) requires a different source for these files. + + - HS-FS + + * tiboot3-am62px-hs-fs-evm.bin from step 3.1 + * tispl.bin, u-boot.img from step 3.2 + + - HS-SE + + * tiboot3-am62px-hs-evm.bin from step 3.1 + * tispl.bin, u-boot.img from step 3.2 + +Image formats: +-------------- + +- tiboot3.bin + +.. image:: img/multi_cert_tiboot3.bin.svg + :alt: tiboot3.bin image format + +- tispl.bin + +.. image:: img/dm_tispl.bin.svg + :alt: tispl.bin image format + +A53 SPL DDR Memory Layout +------------------------- + +.. am62px_evm_rst_include_start_ddr_mem_layout + +This provides an overview memory usage in A53 SPL stage. + +.. list-table:: + :widths: 16 16 16 + :header-rows: 1 + + * - Region + - Start Address + - End Address + + * - EMPTY + - 0x80000000 + - 0x80080000 + + * - TEXT BASE + - 0x80080000 + - 0x800d8000 + + * - EMPTY + - 0x800d8000 + - 0x80200000 + + * - BMP IMAGE + - 0x80200000 + - 0x80b77660 + + * - STACK + - 0x80b77660 + - 0x80b77e60 + + * - GD + - 0x80b77e60 + - 0x80b78000 + + * - MALLOC + - 0x80b78000 + - 0x80b80000 + + * - EMPTY + - 0x80b80000 + - 0x80c80000 + + * - BSS + - 0x80c80000 + - 0x80d00000 + + * - BLOBS + - 0x80d00000 + - 0x80d00400 + + * - EMPTY + - 0x80d00400 + - 0x81000000 +.. am62px_evm_rst_include_end_ddr_mem_layout + +Switch Setting for Boot Mode +---------------------------- + +Boot Mode pins provide means to select the boot mode and options before the +device is powered up. After every POR, they are the main source to populate +the Boot Parameter Tables. + +The following table shows some common boot modes used on AM62Px +platforms. More details can be found in the Technical Reference Manual: +https://www.ti.com/lit/pdf/spruj83 under the `Boot Mode Pins` section. + +.. note:: + + This device is very new. Currently only UART boot is available while + we continue to add support for the other bootmodes. + +.. list-table:: Boot Modes + :widths: 16 16 16 + :header-rows: 1 + + * - Switch Label + - SW2: 12345678 + - SW3: 12345678 + + * - SD + - 01000000 + - 11000010 + + * - OSPI + - 00000000 + - 11001110 + + * - EMMC + - 00000000 + - 11010010 + + * - UART + - 00000000 + - 11011100 + + * - USB DFU + - 00000000 + - 11001010 + +For SW2 and SW1, the switch state in the "ON" position = 1. + +Debugging U-Boot +---------------- + +See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for +detailed setup information. + +.. warning:: + + **OpenOCD support after**: v0.12.0 + + While support for the entire K3 generation including the am62xxx + extended family was added before v0.12.0, the tcl scripts for the + am62px have been accepted and will be available in the next release of + OpenOCD. It may be necessary to build OpenOCD from source depending on + the version your distribution has packaged. + +.. include:: k3.rst + :start-after: .. k3_rst_include_start_openocd_connect_XDS110 + :end-before: .. k3_rst_include_end_openocd_connect_XDS110 + +To start OpenOCD and connect to the board + +.. code-block:: bash + + openocd -f board/ti_am62pevm.cfg diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst index 3c33efd..763ad7f 100644 --- a/doc/board/ti/k3.rst +++ b/doc/board/ti/k3.rst @@ -35,6 +35,7 @@ K3 Based SoCs ../beagle/am62x_beagleplay ../phytec/phycore-am62x ../toradex/verdin-am62 + am62px_sk am64x_evm am65x_evm j7200_evm |