aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--cmd/part.c2
-rw-r--r--cmd/pinmux.c71
-rw-r--r--common/Kconfig.boot1
-rw-r--r--common/image-fit.c3
-rw-r--r--common/spl/spl.c4
-rw-r--r--drivers/gpio/pcf8575_gpio.c43
-rw-r--r--drivers/tee/optee/core.c21
-rw-r--r--drivers/tee/tee-uclass.c19
-rw-r--r--include/config_distro_bootcmd.h2
-rw-r--r--include/configs/SBx81LIFKW.h1
-rw-r--r--include/configs/SBx81LIFXCAT.h1
-rw-r--r--include/configs/ebisu.h1
-rw-r--r--include/configs/vexpress_aemv8a.h58
-rw-r--r--include/configs/xilinx_versal.h1
-rw-r--r--include/dm/pinctrl.h2
-rw-r--r--include/mux.h4
-rw-r--r--include/tee.h6
-rw-r--r--test/cmd/Makefile1
-rw-r--r--test/cmd/pinmux.c36
-rw-r--r--test/py/tests/test_pinmux.py4
20 files changed, 197 insertions, 84 deletions
diff --git a/cmd/part.c b/cmd/part.c
index 3395c17..e0463b5 100644
--- a/cmd/part.c
+++ b/cmd/part.c
@@ -140,7 +140,7 @@ static int do_part_info(int argc, char *const argv[], enum cmd_part_info param)
return 1;
} else {
part = part_get_info_by_name(desc, argv[2], &info);
- if (part == -1)
+ if (part < 0)
return 1;
}
diff --git a/cmd/pinmux.c b/cmd/pinmux.c
index 9942b15..2d23357 100644
--- a/cmd/pinmux.c
+++ b/cmd/pinmux.c
@@ -41,31 +41,43 @@ static int do_dev(struct cmd_tbl *cmdtp, int flag, int argc,
return CMD_RET_SUCCESS;
}
-static int show_pinmux(struct udevice *dev)
+/**
+ * Print the muxing information for one or all pins of one pinctrl device
+ *
+ * @param dev pinctrl device
+ * @param name NULL to display all the pins
+ * or name of the pin to display
+ * @return 0 on success, non-0 on error
+ */
+static int show_pinmux(struct udevice *dev, char *name)
{
char pin_name[PINNAME_SIZE];
char pin_mux[PINMUX_SIZE];
int pins_count;
int i;
int ret;
+ bool found = false;
pins_count = pinctrl_get_pins_count(dev);
if (pins_count == -ENOSYS) {
- printf("Ops get_pins_count not supported\n");
+ printf("Ops get_pins_count not supported by %s\n", dev->name);
return pins_count;
}
for (i = 0; i < pins_count; i++) {
ret = pinctrl_get_pin_name(dev, i, pin_name, PINNAME_SIZE);
- if (ret == -ENOSYS) {
- printf("Ops get_pin_name not supported\n");
+ if (ret) {
+ printf("Ops get_pin_name error (%d) by %s\n", ret, dev->name);
return ret;
}
-
+ if (name && strcmp(name, pin_name))
+ continue;
+ found = true;
ret = pinctrl_get_pin_muxing(dev, i, pin_mux, PINMUX_SIZE);
if (ret) {
- printf("Ops get_pin_muxing error (%d)\n", ret);
+ printf("Ops get_pin_muxing error (%d) by %s in %s\n",
+ ret, pin_name, dev->name);
return ret;
}
@@ -73,6 +85,9 @@ static int show_pinmux(struct udevice *dev)
PINMUX_SIZE, pin_mux);
}
+ if (!found)
+ return -ENOENT;
+
return 0;
}
@@ -80,25 +95,41 @@ static int do_status(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
struct udevice *dev;
- int ret = CMD_RET_USAGE;
+ char *name;
+ int ret;
- if (currdev && (argc < 2 || strcmp(argv[1], "-a")))
- return show_pinmux(currdev);
+ if (argc < 2) {
+ if (!currdev) {
+ printf("pin-controller device not selected\n");
+ return CMD_RET_FAILURE;
+ }
+ show_pinmux(currdev, NULL);
+ return CMD_RET_SUCCESS;
+ }
- if (argc < 2 || strcmp(argv[1], "-a"))
- return ret;
+ if (strcmp(argv[1], "-a"))
+ name = argv[1];
+ else
+ name = NULL;
uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) {
- /* insert a separator between each pin-controller display */
- printf("--------------------------\n");
- printf("%s:\n", dev->name);
- ret = show_pinmux(dev);
- if (ret < 0)
- printf("Can't display pin muxing for %s\n",
- dev->name);
+ if (!name) {
+ /* insert a separator between each pin-controller display */
+ printf("--------------------------\n");
+ printf("%s:\n", dev->name);
+ }
+ ret = show_pinmux(dev, name);
+ /* stop when the status of requested pin is displayed */
+ if (name && !ret)
+ return CMD_RET_SUCCESS;
}
- return ret;
+ if (name) {
+ printf("%s not found\n", name);
+ return CMD_RET_FAILURE;
+ }
+
+ return CMD_RET_SUCCESS;
}
static int do_list(struct cmd_tbl *cmdtp, int flag, int argc,
@@ -146,5 +177,5 @@ U_BOOT_CMD(pinmux, CONFIG_SYS_MAXARGS, 1, do_pinmux,
"show pin-controller muxing",
"list - list UCLASS_PINCTRL devices\n"
"pinmux dev [pincontroller-name] - select pin-controller device\n"
- "pinmux status [-a] - print pin-controller muxing [for all]\n"
+ "pinmux status [-a | pin-name] - print pin-controller muxing [for all | for pin-name]\n"
)
diff --git a/common/Kconfig.boot b/common/Kconfig.boot
index ae3f2b6..b4dc49e 100644
--- a/common/Kconfig.boot
+++ b/common/Kconfig.boot
@@ -358,6 +358,7 @@ config HAVE_SYS_TEXT_BASE
config SYS_TEXT_BASE
depends on HAVE_SYS_TEXT_BASE
+ default 0x0 if POSITION_INDEPENDENT
default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
diff --git a/common/image-fit.c b/common/image-fit.c
index 28bd8e7..d6b2c3c 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -1777,7 +1777,8 @@ int fit_conf_find_compat(const void *fit, const void *fdt)
}
/* search in this config's kernel FDT */
- if (fit_image_get_data(fit, kfdt_noffset, &fdt, &sz)) {
+ if (fit_image_get_data_and_size(fit, kfdt_noffset,
+ &fdt, &sz)) {
debug("Failed to get fdt \"%s\".\n", kfdt_name);
continue;
}
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 3b96f2f..3ec16d0 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -200,7 +200,7 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image)
spl_image->name = "U-Boot";
}
-#ifdef CONFIG_SPL_LOAD_FIT_FULL
+#if CONFIG_IS_ENABLED(LOAD_FIT_FULL)
/* Parse and load full fitImage in SPL */
static int spl_load_fit_image(struct spl_image_info *spl_image,
const struct image_header *header)
@@ -307,7 +307,7 @@ __weak int spl_parse_legacy_header(struct spl_image_info *spl_image,
int spl_parse_image_header(struct spl_image_info *spl_image,
const struct image_header *header)
{
-#ifdef CONFIG_SPL_LOAD_FIT_FULL
+#if CONFIG_IS_ENABLED(LOAD_FIT_FULL)
int ret = spl_load_fit_image(spl_image, header);
if (!ret)
diff --git a/drivers/gpio/pcf8575_gpio.c b/drivers/gpio/pcf8575_gpio.c
index 3596462..d5930d9 100644
--- a/drivers/gpio/pcf8575_gpio.c
+++ b/drivers/gpio/pcf8575_gpio.c
@@ -12,15 +12,9 @@
*
* Copyright (C) 2007 David Brownell
*
- */
-
-/*
- * NOTE: The driver and devicetree bindings are borrowed from Linux
- * Kernel, but driver does not support all PCF857x devices. It currently
- * supports PCF8575 16-bit expander by TI and NXP.
+ * Add support for 8 bit expanders - like pca8574
+ * Copyright (C) 2021 Lukasz Majewski - DENX Software Engineering
*
- * TODO(vigneshr@ti.com):
- * Support 8 bit PCF857x compatible expanders.
*/
#include <common.h>
@@ -34,8 +28,6 @@
DECLARE_GLOBAL_DATA_PTR;
struct pcf8575_chip {
- int gpio_count; /* No. GPIOs supported by the chip */
-
/* NOTE: these chips have strange "quasi-bidirectional" I/O pins.
* We can't actually know whether a pin is configured (a) as output
* and driving the signal low, or (b) as input and reporting a low
@@ -49,18 +41,17 @@ struct pcf8575_chip {
* reset state. Otherwise it flags pins to be driven low.
*/
unsigned int out; /* software latch */
- const char *bank_name; /* Name of the expander bank */
};
-/* Read/Write to 16-bit I/O expander */
+/* Read/Write to I/O expander */
-static int pcf8575_i2c_write_le16(struct udevice *dev, unsigned int word)
+static int pcf8575_i2c_write(struct udevice *dev, unsigned int word)
{
struct dm_i2c_chip *chip = dev_get_parent_plat(dev);
u8 buf[2] = { word & 0xff, word >> 8, };
int ret;
- ret = dm_i2c_write(dev, 0, buf, 2);
+ ret = dm_i2c_write(dev, 0, buf, dev_get_driver_data(dev));
if (ret)
printf("%s i2c write failed to addr %x\n", __func__,
chip->chip_addr);
@@ -68,13 +59,13 @@ static int pcf8575_i2c_write_le16(struct udevice *dev, unsigned int word)
return ret;
}
-static int pcf8575_i2c_read_le16(struct udevice *dev)
+static int pcf8575_i2c_read(struct udevice *dev)
{
struct dm_i2c_chip *chip = dev_get_parent_plat(dev);
- u8 buf[2];
+ u8 buf[2] = {0x00, 0x00};
int ret;
- ret = dm_i2c_read(dev, 0, buf, 2);
+ ret = dm_i2c_read(dev, 0, buf, dev_get_driver_data(dev));
if (ret) {
printf("%s i2c read failed from addr %x\n", __func__,
chip->chip_addr);
@@ -90,7 +81,7 @@ static int pcf8575_direction_input(struct udevice *dev, unsigned offset)
int status;
plat->out |= BIT(offset);
- status = pcf8575_i2c_write_le16(dev, plat->out);
+ status = pcf8575_i2c_write(dev, plat->out);
return status;
}
@@ -106,7 +97,7 @@ static int pcf8575_direction_output(struct udevice *dev,
else
plat->out &= ~BIT(offset);
- ret = pcf8575_i2c_write_le16(dev, plat->out);
+ ret = pcf8575_i2c_write(dev, plat->out);
return ret;
}
@@ -115,7 +106,7 @@ static int pcf8575_get_value(struct udevice *dev, unsigned int offset)
{
int value;
- value = pcf8575_i2c_read_le16(dev);
+ value = pcf8575_i2c_read(dev);
return (value < 0) ? value : ((value & BIT(offset)) >> offset);
}
@@ -133,8 +124,11 @@ static int pcf8575_ofdata_plat(struct udevice *dev)
int n_latch;
- uc_priv->gpio_count = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
- "gpio-count", 16);
+ /*
+ * Number of pins depends on the expander device and is specified
+ * in the struct udevice_id (as in the Linue kernel).
+ */
+ uc_priv->gpio_count = dev_get_driver_data(dev) * 8;
uc_priv->bank_name = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
"gpio-bank-name", NULL);
if (!uc_priv->bank_name)
@@ -166,8 +160,9 @@ static const struct dm_gpio_ops pcf8575_gpio_ops = {
};
static const struct udevice_id pcf8575_gpio_ids[] = {
- { .compatible = "nxp,pcf8575" },
- { .compatible = "ti,pcf8575" },
+ { .compatible = "nxp,pcf8575", .data = 2 },
+ { .compatible = "ti,pcf8575", .data = 2 },
+ { .compatible = "nxp,pca8574", .data = 1 },
{ }
};
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index 73dbb22..dad46aa 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -1,9 +1,10 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (c) 2018 Linaro Limited
+ * Copyright (c) 2018-2020 Linaro Limited
*/
#include <common.h>
+#include <cpu_func.h>
#include <dm.h>
#include <dm/device_compat.h>
#include <log.h>
@@ -295,6 +296,16 @@ static u32 call_err_to_res(u32 call_err)
}
}
+static void flush_shm_dcache(struct udevice *dev, struct optee_msg_arg *arg)
+{
+ size_t sz = OPTEE_MSG_GET_ARG_SIZE(arg->num_params);
+
+ flush_dcache_range(rounddown((ulong)arg, CONFIG_SYS_CACHELINE_SIZE),
+ roundup((ulong)arg + sz, CONFIG_SYS_CACHELINE_SIZE));
+
+ tee_flush_all_shm_dcache(dev);
+}
+
static u32 do_call_with_arg(struct udevice *dev, struct optee_msg_arg *arg)
{
struct optee_pdata *pdata = dev_get_plat(dev);
@@ -305,9 +316,17 @@ static u32 do_call_with_arg(struct udevice *dev, struct optee_msg_arg *arg)
while (true) {
struct arm_smccc_res res;
+ /* If cache are off from U-Boot, sync the cache shared with OP-TEE */
+ if (!dcache_status())
+ flush_shm_dcache(dev, arg);
+
pdata->invoke_fn(param.a0, param.a1, param.a2, param.a3,
param.a4, param.a5, param.a6, param.a7, &res);
+ /* If cache are off from U-Boot, sync the cache shared with OP-TEE */
+ if (!dcache_status())
+ flush_shm_dcache(dev, arg);
+
free(page_list);
page_list = NULL;
diff --git a/drivers/tee/tee-uclass.c b/drivers/tee/tee-uclass.c
index cb1b28e..52412a4 100644
--- a/drivers/tee/tee-uclass.c
+++ b/drivers/tee/tee-uclass.c
@@ -1,15 +1,17 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (c) 2018 Linaro Limited
+ * Copyright (c) 2018-2020 Linaro Limited
*/
#define LOG_CATEGORY UCLASS_TEE
#include <common.h>
+#include <cpu_func.h>
#include <dm.h>
#include <log.h>
#include <malloc.h>
#include <tee.h>
+#include <asm/cache.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
@@ -235,3 +237,18 @@ void tee_optee_ta_uuid_to_octets(u8 d[TEE_UUID_LEN],
d[7] = s->time_hi_and_version;
memcpy(d + 8, s->clock_seq_and_node, sizeof(s->clock_seq_and_node));
}
+
+void tee_flush_all_shm_dcache(struct udevice *dev)
+{
+ struct tee_uclass_priv *priv = dev_get_uclass_priv(dev);
+ struct tee_shm *s;
+
+ list_for_each_entry(s, &priv->list_shm, link) {
+ ulong start = rounddown((ulong)s->addr,
+ CONFIG_SYS_CACHELINE_SIZE);
+ ulong end = roundup((ulong)s->addr + s->size,
+ CONFIG_SYS_CACHELINE_SIZE);
+
+ flush_dcache_range(start, end);
+ }
+}
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 2627c2a..e70423f 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -375,7 +375,7 @@
#endif
#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
"bootcmd_dhcp=" \
- "setenv devtype " #devtypel "; " \
+ "devtype=" #devtypel "; " \
BOOTENV_RUN_NET_USB_START \
BOOTENV_RUN_PCI_ENUM \
"if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h
index eaa6b92..ded494c 100644
--- a/include/configs/SBx81LIFKW.h
+++ b/include/configs/SBx81LIFKW.h
@@ -84,7 +84,6 @@
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
#define CONFIG_PHY_BASE_ADR 0x01
diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h
index c0dc3d3..06bbd86 100644
--- a/include/configs/SBx81LIFXCAT.h
+++ b/include/configs/SBx81LIFXCAT.h
@@ -84,7 +84,6 @@
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
#define CONFIG_PHY_BASE_ADR 0x01
diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h
index 19ec74f..48d4c8a 100644
--- a/include/configs/ebisu.h
+++ b/include/configs/ebisu.h
@@ -14,7 +14,6 @@
#include "rcar-gen3-common.h"
/* Ethernet RAVB */
-#define CONFIG_NET_MULTI
#define CONFIG_BITBANGMII_MULTI
/* Generic Timer Definitions (use in assembler source) */
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 7318fb6..54b5967 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -126,6 +126,39 @@
/* Initial environment variables */
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+/* Copy the kernel and FDT to DRAM memory and boot */
+#define BOOTENV_DEV_AFS(devtypeu, devtypel, instance) \
+ "bootcmd_afs=" \
+ "afs load ${kernel_name} ${kernel_addr_r} ;"\
+ "if test $? -eq 1; then "\
+ " echo Loading ${kernel_alt_name} instead of ${kernel_name}; "\
+ " afs load ${kernel_alt_name} ${kernel_addr_r};"\
+ "fi ; "\
+ "afs load ${fdtfile} ${fdt_addr_r} ;"\
+ "if test $? -eq 1; then "\
+ " echo Loading ${fdt_alt_name} instead of ${fdtfile}; "\
+ " afs load ${fdt_alt_name} ${fdt_addr_r}; "\
+ "fi ; "\
+ "fdt addr ${fdt_addr_r}; fdt resize; " \
+ "if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\
+ "then "\
+ " setenv ramdisk_param ${ramdisk_addr_r}; "\
+ "else "\
+ " setenv ramdisk_param -; "\
+ "fi ; " \
+ "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0"
+#define BOOTENV_DEV_NAME_AFS(devtypeu, devtypel, instance) "afs "
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(USB, usb, 0) \
+ func(SATA, sata, 0) \
+ func(SATA, sata, 1) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na) \
+ func(AFS, afs, na)
+
+#include <config_distro_bootcmd.h>
+
/*
* Defines where the kernel and FDT exist in NOR flash and where it will
* be copied into DRAM
@@ -139,30 +172,7 @@
"fdtfile=board.dtb\0" \
"fdt_alt_name=juno\0" \
"fdt_addr_r=0x80000000\0" \
-
-#ifndef CONFIG_BOOTCOMMAND
-/* Copy the kernel and FDT to DRAM memory and boot */
-#define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr_r} ;"\
- "if test $? -eq 1; then "\
- " echo Loading ${kernel_alt_name} instead of "\
- "${kernel_name}; "\
- " afs load ${kernel_alt_name} ${kernel_addr_r};"\
- "fi ; "\
- "afs load ${fdtfile} ${fdt_addr_r} ;"\
- "if test $? -eq 1; then "\
- " echo Loading ${fdt_alt_name} instead of "\
- "${fdtfile}; "\
- " afs load ${fdt_alt_name} ${fdt_addr_r}; "\
- "fi ; "\
- "fdt addr ${fdt_addr_r}; fdt resize; " \
- "if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\
- "then "\
- " setenv ramdisk_param ${ramdisk_addr_r}; "\
- " else setenv ramdisk_param -; "\
- "fi ; " \
- "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}"
-#endif
-
+ BOOTENV
#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
#define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h
index ebe8196..aae128f 100644
--- a/include/configs/xilinx_versal.h
+++ b/include/configs/xilinx_versal.h
@@ -53,7 +53,6 @@
/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_NET_MULTI
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define PHY_ANEG_TIMEOUT 20000
#endif
diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h
index 1bdc8d3..695e78a 100644
--- a/include/dm/pinctrl.h
+++ b/include/dm/pinctrl.h
@@ -587,7 +587,7 @@ int pinctrl_get_pin_muxing(struct udevice *dev, int selector, char *buf,
*
* This allows to know the number of pins owned by a given pin-controller
*
- * Return: Number of pins if OK, or negative error code on failure
+ * Return: Number of pins if OK, or -ENOSYS when not supported
*/
int pinctrl_get_pins_count(struct udevice *dev);
diff --git a/include/mux.h b/include/mux.h
index 23844f4..9f80991 100644
--- a/include/mux.h
+++ b/include/mux.h
@@ -51,7 +51,7 @@ unsigned int mux_control_states(struct mux_control *mux);
*/
int __must_check mux_control_select(struct mux_control *mux,
unsigned int state);
-#define mux_control_try_select(mux) mux_control_select(mux)
+#define mux_control_try_select(mux, state) mux_control_select(mux, state)
/**
* mux_control_deselect() - Deselect the previously selected multiplexer state.
@@ -128,7 +128,7 @@ int __must_check mux_control_select(struct mux_control *mux,
return -ENOSYS;
}
-#define mux_control_try_select(mux) mux_control_select(mux)
+#define mux_control_try_select(mux, state) mux_control_select(mux, state)
int mux_control_deselect(struct mux_control *mux)
{
diff --git a/include/tee.h b/include/tee.h
index 99367b2..2ef29bf 100644
--- a/include/tee.h
+++ b/include/tee.h
@@ -377,4 +377,10 @@ void tee_optee_ta_uuid_from_octets(struct tee_optee_ta_uuid *d,
void tee_optee_ta_uuid_to_octets(u8 d[TEE_UUID_LEN],
const struct tee_optee_ta_uuid *s);
+/**
+ * tee_flush_all_shm_dcache() - Flush data cache for all shared memories
+ * @dev: The TEE device
+ */
+void tee_flush_all_shm_dcache(struct udevice *dev);
+
#endif /* __TEE_H */
diff --git a/test/cmd/Makefile b/test/cmd/Makefile
index 2cfe43a..a59adb1 100644
--- a/test/cmd/Makefile
+++ b/test/cmd/Makefile
@@ -8,5 +8,6 @@ endif
obj-y += mem.o
obj-$(CONFIG_CMD_ADDRMAP) += addrmap.o
obj-$(CONFIG_CMD_MEM_SEARCH) += mem_search.o
+obj-$(CONFIG_CMD_PINMUX) += pinmux.o
obj-$(CONFIG_CMD_PWM) += pwm.o
obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
diff --git a/test/cmd/pinmux.c b/test/cmd/pinmux.c
new file mode 100644
index 0000000..8ae807b
--- /dev/null
+++ b/test/cmd/pinmux.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Executes tests for pinmux command
+ *
+ * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dm/test.h>
+#include <test/test.h>
+#include <test/ut.h>
+
+static int dm_test_cmd_pinmux_status_pinname(struct unit_test_state *uts)
+{
+ /* Test that 'pinmux status <pinname>' displays the selected pin. */
+ console_record_reset();
+ run_command("pinmux status a5", 0);
+ ut_assert_nextline("a5 : gpio input . ");
+ ut_assert_console_end();
+
+ console_record_reset();
+ run_command("pinmux status P7", 0);
+ ut_assert_nextline("P7 : GPIO2 bias-pull-down input-enable. ");
+ ut_assert_console_end();
+
+ console_record_reset();
+ run_command("pinmux status P9", 0);
+ ut_assert_nextline("single-pinctrl pinctrl-single-no-width: missing register width");
+ ut_assert_nextline("P9 not found");
+ ut_assert_console_end();
+
+ return 0;
+}
+
+DM_TEST(dm_test_cmd_pinmux_status_pinname, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
diff --git a/test/py/tests/test_pinmux.py b/test/py/tests/test_pinmux.py
index 0cbbae0..b3ae2ab 100644
--- a/test/py/tests/test_pinmux.py
+++ b/test/py/tests/test_pinmux.py
@@ -13,9 +13,9 @@ def test_pinmux_usage_1(u_boot_console):
@pytest.mark.buildconfigspec('cmd_pinmux')
def test_pinmux_usage_2(u_boot_console):
"""Test that 'pinmux status' executed without previous "pinmux dev"
- command displays pinmux usage."""
+ command displays error message."""
output = u_boot_console.run_command('pinmux status')
- assert 'Usage:' in output
+ assert 'pin-controller device not selected' in output
@pytest.mark.buildconfigspec('cmd_pinmux')
@pytest.mark.boardspec('sandbox')
generated by cgit v1.1 at 2024-07-10 23:17:08 +0000