aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--dts/upstream/Bindings/Makefile36
-rw-r--r--dts/upstream/Bindings/access-controllers/access-controllers.yaml84
-rw-r--r--dts/upstream/Bindings/arm/altera/socfpga-sdram-controller.txt12
-rw-r--r--dts/upstream/Bindings/arm/amlogic.yaml13
-rw-r--r--dts/upstream/Bindings/arm/apm/scu.txt17
-rw-r--r--dts/upstream/Bindings/arm/aspeed/aspeed.yaml6
-rw-r--r--dts/upstream/Bindings/arm/bcm/brcm,bcm4708.yaml2
-rw-r--r--dts/upstream/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml30
-rw-r--r--dts/upstream/Bindings/arm/fsl.yaml22
-rw-r--r--dts/upstream/Bindings/arm/keystone/ti,sci.yaml5
-rw-r--r--dts/upstream/Bindings/arm/marvell/armada-37xx.txt32
-rw-r--r--dts/upstream/Bindings/arm/qcom,coresight-tpda.yaml34
-rw-r--r--dts/upstream/Bindings/arm/qcom.yaml18
-rw-r--r--dts/upstream/Bindings/arm/rockchip.yaml48
-rw-r--r--dts/upstream/Bindings/arm/stm32/st,mlahb.yaml3
-rw-r--r--dts/upstream/Bindings/arm/sunxi.yaml25
-rw-r--r--dts/upstream/Bindings/ata/ahci-da850.txt18
-rw-r--r--dts/upstream/Bindings/ata/fsl,imx-pata.yaml42
-rw-r--r--dts/upstream/Bindings/ata/imx-pata.txt16
-rw-r--r--dts/upstream/Bindings/ata/ti,da850-ahci.yaml39
-rw-r--r--dts/upstream/Bindings/bus/st,stm32-etzpc.yaml96
-rw-r--r--dts/upstream/Bindings/bus/st,stm32mp25-rifsc.yaml105
-rw-r--r--dts/upstream/Bindings/cache/qcom,llcc.yaml2
-rw-r--r--dts/upstream/Bindings/clock/airoha,en7523-scu.yaml31
-rw-r--r--dts/upstream/Bindings/clock/fixed-clock.yaml9
-rw-r--r--dts/upstream/Bindings/clock/fixed-factor-clock.yaml9
-rw-r--r--dts/upstream/Bindings/clock/google,gs101-clock.yaml55
-rw-r--r--dts/upstream/Bindings/clock/loongson,ls2k-clk.yaml4
-rw-r--r--dts/upstream/Bindings/clock/nxp,imx95-blk-ctl.yaml56
-rw-r--r--dts/upstream/Bindings/clock/nxp,imx95-display-master-csr.yaml64
-rw-r--r--dts/upstream/Bindings/clock/qcom,hfpll.txt63
-rw-r--r--dts/upstream/Bindings/clock/qcom,hfpll.yaml69
-rw-r--r--dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml18
-rw-r--r--dts/upstream/Bindings/clock/samsung,s3c6400-clock.yaml57
-rw-r--r--dts/upstream/Bindings/clock/samsung,s3c64xx-clock.txt76
-rw-r--r--dts/upstream/Bindings/clock/sophgo,cv1800-clk.yaml3
-rw-r--r--dts/upstream/Bindings/clock/st,stm32mp25-rcc.yaml172
-rw-r--r--dts/upstream/Bindings/cpufreq/cpufreq-qcom-hw.yaml2
-rw-r--r--dts/upstream/Bindings/crypto/nvidia,tegra234-se-aes.yaml52
-rw-r--r--dts/upstream/Bindings/crypto/nvidia,tegra234-se-hash.yaml52
-rw-r--r--dts/upstream/Bindings/crypto/omap-sham.txt28
-rw-r--r--dts/upstream/Bindings/crypto/qcom,inline-crypto-engine.yaml1
-rw-r--r--dts/upstream/Bindings/crypto/st,stm32-cryp.yaml4
-rw-r--r--dts/upstream/Bindings/crypto/st,stm32-hash.yaml4
-rw-r--r--dts/upstream/Bindings/crypto/starfive,jh7110-crypto.yaml30
-rw-r--r--dts/upstream/Bindings/crypto/ti,omap-sham.yaml56
-rw-r--r--dts/upstream/Bindings/display/atmel,lcdc-display.yaml103
-rw-r--r--dts/upstream/Bindings/display/atmel,lcdc.txt87
-rw-r--r--dts/upstream/Bindings/display/atmel,lcdc.yaml70
-rw-r--r--dts/upstream/Bindings/display/bridge/ite,it6505.yaml8
-rw-r--r--dts/upstream/Bindings/display/bridge/lvds-codec.yaml1
-rw-r--r--dts/upstream/Bindings/display/bridge/microchip,sam9x75-lvds.yaml55
-rw-r--r--dts/upstream/Bindings/display/bridge/toshiba,tc358775.yaml39
-rw-r--r--dts/upstream/Bindings/display/exynos/exynos_dp.txt112
-rw-r--r--dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml5
-rw-r--r--dts/upstream/Bindings/display/msm/dp-controller.yaml1
-rw-r--r--dts/upstream/Bindings/display/msm/qcom,sm6350-mdss.yaml9
-rw-r--r--dts/upstream/Bindings/display/panel/abt,y030xx067a.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/boe,bf060y8m-aj0.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/boe,himax8279d.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/boe,th101mb31ig002-28a.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml2
-rw-r--r--dts/upstream/Bindings/display/panel/elida,kd35t133.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/fascontek,fs035vg158.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/feixin,k101-im2ba02.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/himax,hx83112a.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/himax,hx8394.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/ilitek,ili9163.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/ilitek,ili9322.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/ilitek,ili9341.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/ilitek,ili9805.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/ilitek,ili9881c.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/innolux,ej030na.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/innolux,p097pfg.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/jdi,lpm102a188a.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/jdi,lt070me05000.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/leadtek,ltk035c5444t.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/leadtek,ltk050h3146w.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/leadtek,ltk500hd1829.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/lg,lg4573.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/lg,sw43408.yaml62
-rw-r--r--dts/upstream/Bindings/display/panel/lgphilips,lb035q02.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/nec,nl8048hl11.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/newvision,nv3051d.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/novatek,nt35510.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/novatek,nt35950.yaml7
-rw-r--r--dts/upstream/Bindings/display/panel/novatek,nt36523.yaml29
-rw-r--r--dts/upstream/Bindings/display/panel/novatek,nt36672a.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/olimex,lcd-olinuxino.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/panel-common-dual.yaml47
-rw-r--r--dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/panel-simple.yaml17
-rw-r--r--dts/upstream/Bindings/display/panel/raydium,rm67191.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/raydium,rm692e5.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/raydium,rm69380.yaml89
-rw-r--r--dts/upstream/Bindings/display/panel/rocktech,jh057n00900.yaml2
-rw-r--r--dts/upstream/Bindings/display/panel/ronbo,rb070d30.yaml2
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,ams495qa01.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,ld9040.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,lms380kf01.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,lms397kf04.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,s6d16d0.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,s6d27a1.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,s6d7aa0.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,s6e63m0.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/samsung,s6e8aa0.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/sharp,lq101r1sx01.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/sharp,ls043t1le01.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/sharp,ls060t1sx01.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/sitronix,st7789v.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/sony,acx424akp.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/sony,acx565akm.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml5
-rw-r--r--dts/upstream/Bindings/display/panel/sony,tulip-truly-nt35521.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/synaptics,r63353.yaml6
-rw-r--r--dts/upstream/Bindings/display/panel/tpo,td.yaml4
-rw-r--r--dts/upstream/Bindings/display/panel/tpo,tpg110.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/visionox,rm69299.yaml3
-rw-r--r--dts/upstream/Bindings/display/panel/xinpeng,xpp055c272.yaml5
-rw-r--r--dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml5
-rw-r--r--dts/upstream/Bindings/display/rockchip/rockchip,inno-hdmi.yaml5
-rw-r--r--dts/upstream/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml7
-rw-r--r--dts/upstream/Bindings/display/samsung/samsung,exynos5-dp.yaml163
-rw-r--r--dts/upstream/Bindings/display/tegra/nvidia,tegra20-host1x.yaml11
-rw-r--r--dts/upstream/Bindings/dma/fsl,edma.yaml143
-rw-r--r--dts/upstream/Bindings/dma/fsl,imx-sdma.yaml1
-rw-r--r--dts/upstream/Bindings/dma/qcom_hidma_mgmt.txt95
-rw-r--r--dts/upstream/Bindings/dma/snps,dma-spear1340.yaml42
-rw-r--r--dts/upstream/Bindings/dma/snps,dw-axi-dmac.yaml1
-rw-r--r--dts/upstream/Bindings/dma/st,stm32-dma.yaml4
-rw-r--r--dts/upstream/Bindings/dma/st,stm32-dmamux.yaml4
-rw-r--r--dts/upstream/Bindings/firmware/arm,scmi.yaml54
-rw-r--r--dts/upstream/Bindings/fpga/xlnx,fpga-selectmap.yaml86
-rw-r--r--dts/upstream/Bindings/gpio/brcm,brcmstb-gpio.yaml3
-rw-r--r--dts/upstream/Bindings/gpio/microchip,mpfs-gpio.yaml17
-rw-r--r--dts/upstream/Bindings/gpio/raspberrypi,firmware-gpio.txt30
-rw-r--r--dts/upstream/Bindings/gpu/arm,mali-valhall-csf.yaml147
-rw-r--r--dts/upstream/Bindings/hwmon/adc128d818.txt38
-rw-r--r--dts/upstream/Bindings/hwmon/adi,adm1275.yaml4
-rw-r--r--dts/upstream/Bindings/hwmon/as370.txt11
-rw-r--r--dts/upstream/Bindings/hwmon/ibm,opal-sensor.yaml37
-rw-r--r--dts/upstream/Bindings/hwmon/ibm,p8-occ-hwmon.txt25
-rw-r--r--dts/upstream/Bindings/hwmon/ibmpowernv.txt23
-rw-r--r--dts/upstream/Bindings/hwmon/lm87.txt30
-rw-r--r--dts/upstream/Bindings/hwmon/max6650.txt28
-rw-r--r--dts/upstream/Bindings/hwmon/maxim,max6650.yaml70
-rw-r--r--dts/upstream/Bindings/hwmon/pmbus/adi,adp1050.yaml49
-rw-r--r--dts/upstream/Bindings/hwmon/pwm-fan.txt1
-rw-r--r--dts/upstream/Bindings/hwmon/st,stts751.yaml41
-rw-r--r--dts/upstream/Bindings/hwmon/stts751.txt15
-rw-r--r--dts/upstream/Bindings/hwmon/syna,as370.yaml32
-rw-r--r--dts/upstream/Bindings/hwmon/ti,adc128d818.yaml63
-rw-r--r--dts/upstream/Bindings/hwmon/ti,lm87.yaml69
-rw-r--r--dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml2
-rw-r--r--dts/upstream/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml2
-rw-r--r--dts/upstream/Bindings/i2c/i2c-pnx.txt34
-rw-r--r--dts/upstream/Bindings/i2c/nxp,pnx-i2c.yaml46
-rw-r--r--dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml19
-rw-r--r--dts/upstream/Bindings/i2c/renesas,riic.yaml19
-rw-r--r--dts/upstream/Bindings/i2c/st,stm32-i2c.yaml4
-rw-r--r--dts/upstream/Bindings/iio/accel/adi,adxl345.yaml2
-rw-r--r--dts/upstream/Bindings/iio/adc/adi,ad7173.yaml279
-rw-r--r--dts/upstream/Bindings/iio/adc/adi,ad7944.yaml213
-rw-r--r--dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml5
-rw-r--r--dts/upstream/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml9
-rw-r--r--dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml4
-rw-r--r--dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml4
-rw-r--r--dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml2
-rw-r--r--dts/upstream/Bindings/iio/dac/adi,ad9739a.yaml95
-rw-r--r--dts/upstream/Bindings/iio/dac/adi,axi-dac.yaml62
-rw-r--r--dts/upstream/Bindings/iio/dac/st,stm32-dac.yaml4
-rw-r--r--dts/upstream/Bindings/iio/dac/ti,dac5571.yaml1
-rw-r--r--dts/upstream/Bindings/iio/health/maxim,max30102.yaml12
-rw-r--r--dts/upstream/Bindings/iio/humidity/ti,hdc3020.yaml5
-rw-r--r--dts/upstream/Bindings/iio/imu/invensense,icm42600.yaml2
-rw-r--r--dts/upstream/Bindings/iio/imu/invensense,mpu6050.yaml17
-rw-r--r--dts/upstream/Bindings/iio/light/avago,apds9300.yaml20
-rw-r--r--dts/upstream/Bindings/iio/light/avago,apds9960.yaml44
-rw-r--r--dts/upstream/Bindings/iio/temperature/adi,ltc2983.yaml4
-rw-r--r--dts/upstream/Bindings/input/azoteq,iqs7222.yaml2
-rw-r--r--dts/upstream/Bindings/input/elan,ekth6915.yaml19
-rw-r--r--dts/upstream/Bindings/input/ilitek,ili2901.yaml66
-rw-r--r--dts/upstream/Bindings/input/qcom,pm8xxx-vib.yaml16
-rw-r--r--dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml2
-rw-r--r--dts/upstream/Bindings/input/twl4030-pwrbutton.txt21
-rw-r--r--dts/upstream/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml8
-rw-r--r--dts/upstream/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml2
-rw-r--r--dts/upstream/Bindings/interrupt-controller/renesas,irqc.yaml1
-rw-r--r--dts/upstream/Bindings/interrupt-controller/riscv,aplic.yaml172
-rw-r--r--dts/upstream/Bindings/interrupt-controller/riscv,imsics.yaml172
-rw-r--r--dts/upstream/Bindings/interrupt-controller/st,stm32-exti.yaml17
-rw-r--r--dts/upstream/Bindings/iommu/qcom,tbu.yaml69
-rw-r--r--dts/upstream/Bindings/iommu/renesas,ipmmu-vmsa.yaml1
-rw-r--r--dts/upstream/Bindings/leds/leds-qcom-lpg.yaml8
-rw-r--r--dts/upstream/Bindings/leds/nxp,pca963x.yaml140
-rw-r--r--dts/upstream/Bindings/leds/pca963x.txt52
-rw-r--r--dts/upstream/Bindings/mailbox/arm,mhuv3.yaml224
-rw-r--r--dts/upstream/Bindings/mailbox/qcom,apcs-kpss-global.yaml1
-rw-r--r--dts/upstream/Bindings/mailbox/qcom-ipcc.yaml1
-rw-r--r--dts/upstream/Bindings/media/amphion,vpu.yaml2
-rw-r--r--dts/upstream/Bindings/media/brcm,bcm2835-unicam.yaml127
-rw-r--r--dts/upstream/Bindings/media/cec/st,stm32-cec.yaml4
-rw-r--r--dts/upstream/Bindings/media/i2c/galaxycore,gc0308.yaml2
-rw-r--r--dts/upstream/Bindings/media/i2c/galaxycore,gc2145.yaml2
-rw-r--r--dts/upstream/Bindings/media/i2c/ovti,ov2680.yaml35
-rw-r--r--dts/upstream/Bindings/media/i2c/ovti,ov8856.yaml (renamed from dts/upstream/Bindings/media/i2c/ov8856.yaml)2
-rw-r--r--dts/upstream/Bindings/media/i2c/sony,imx214.yaml2
-rw-r--r--dts/upstream/Bindings/media/i2c/sony,imx290.yaml5
-rw-r--r--dts/upstream/Bindings/media/i2c/sony,imx415.yaml2
-rw-r--r--dts/upstream/Bindings/media/nxp,imx8-isi.yaml1
-rw-r--r--dts/upstream/Bindings/media/nxp,imx8-jpeg.yaml11
-rw-r--r--dts/upstream/Bindings/media/qcom,sc8280xp-camss.yaml512
-rw-r--r--dts/upstream/Bindings/media/st,stm32-dcmi.yaml4
-rw-r--r--dts/upstream/Bindings/media/st,stm32mp25-video-codec.yaml4
-rw-r--r--dts/upstream/Bindings/memory-controllers/samsung,s5pv210-dmc.yaml33
-rw-r--r--dts/upstream/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/actions,atc260x.yaml6
-rw-r--r--dts/upstream/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml14
-rw-r--r--dts/upstream/Bindings/mfd/aspeed,ast2x00-scu.yaml16
-rw-r--r--dts/upstream/Bindings/mfd/brcm,cru.yaml8
-rw-r--r--dts/upstream/Bindings/mfd/brcm,iproc-cdru.txt16
-rw-r--r--dts/upstream/Bindings/mfd/brcm,iproc-mhb.txt18
-rw-r--r--dts/upstream/Bindings/mfd/brcm,misc.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/canaan,k210-sysctl.yaml6
-rw-r--r--dts/upstream/Bindings/mfd/delta,tn48m-cpld.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/iqs62x.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/kontron,sl28cpld.yaml10
-rw-r--r--dts/upstream/Bindings/mfd/lp873x.txt67
-rw-r--r--dts/upstream/Bindings/mfd/max77650.yaml8
-rw-r--r--dts/upstream/Bindings/mfd/maxim,max77686.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/maxim,max77693.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/qcom,tcsr.yaml1
-rw-r--r--dts/upstream/Bindings/mfd/qcom-pm8xxx.yaml1
-rw-r--r--dts/upstream/Bindings/mfd/richtek,rt4831.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/ricoh,rn5t618.yaml6
-rw-r--r--dts/upstream/Bindings/mfd/rockchip,rk805.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/rockchip,rk808.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/rockchip,rk816.yaml274
-rw-r--r--dts/upstream/Bindings/mfd/rockchip,rk817.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/rockchip,rk818.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/rohm,bd71815-pmic.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/rohm,bd71828-pmic.yaml13
-rw-r--r--dts/upstream/Bindings/mfd/rohm,bd71837-pmic.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/rohm,bd9571mwv.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/rohm,bd9576-pmic.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/samsung,s2mpa01.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/samsung,s2mps11.yaml12
-rw-r--r--dts/upstream/Bindings/mfd/samsung,s5m8767.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/st,stm32-lptimer.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/st,stm32-timers.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/st,stmfx.yaml2
-rw-r--r--dts/upstream/Bindings/mfd/st,stpmic1.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/stericsson,ab8500.yaml48
-rw-r--r--dts/upstream/Bindings/mfd/stericsson,db8500-prcmu.yaml40
-rw-r--r--dts/upstream/Bindings/mfd/syscon.yaml16
-rw-r--r--dts/upstream/Bindings/mfd/ti,lp8732.yaml112
-rw-r--r--dts/upstream/Bindings/mfd/ti,tps65086.yaml4
-rw-r--r--dts/upstream/Bindings/mfd/ti,tps6594.yaml1
-rw-r--r--dts/upstream/Bindings/mfd/ti,twl.yaml72
-rw-r--r--dts/upstream/Bindings/mfd/x-powers,axp152.yaml2
-rw-r--r--dts/upstream/Bindings/mmc/arm,pl18x.yaml4
-rw-r--r--dts/upstream/Bindings/mmc/fsl-imx-esdhc.yaml3
-rw-r--r--dts/upstream/Bindings/mmc/renesas,sdhi.yaml39
-rw-r--r--dts/upstream/Bindings/mtd/mtd.yaml4
-rw-r--r--dts/upstream/Bindings/mtd/partitions/binman.yaml53
-rw-r--r--dts/upstream/Bindings/mtd/partitions/partition.yaml72
-rw-r--r--dts/upstream/Bindings/mtd/samsung,s5pv210-onenand.yaml65
-rw-r--r--dts/upstream/Bindings/net/airoha,en8811h.yaml56
-rw-r--r--dts/upstream/Bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml55
-rw-r--r--dts/upstream/Bindings/net/broadcom-bluetooth.yaml33
-rw-r--r--dts/upstream/Bindings/net/can/bosch,m_can.yaml4
-rw-r--r--dts/upstream/Bindings/net/fsl,fman-dtsec.yaml1
-rw-r--r--dts/upstream/Bindings/net/nxp,dwmac-imx.yaml4
-rw-r--r--dts/upstream/Bindings/net/pse-pd/microchip,pd692x0.yaml176
-rw-r--r--dts/upstream/Bindings/net/pse-pd/pse-controller.yaml101
-rw-r--r--dts/upstream/Bindings/net/pse-pd/ti,tps23881.yaml113
-rw-r--r--dts/upstream/Bindings/net/qcom,ethqos.yaml2
-rw-r--r--dts/upstream/Bindings/net/qcom,ipq4019-mdio.yaml2
-rw-r--r--dts/upstream/Bindings/net/renesas,etheravb.yaml12
-rw-r--r--dts/upstream/Bindings/net/renesas,ethertsn.yaml33
-rw-r--r--dts/upstream/Bindings/net/renesas,rzn1-gmac.yaml66
-rw-r--r--dts/upstream/Bindings/net/rockchip-dwmac.yaml4
-rw-r--r--dts/upstream/Bindings/net/sff,sfp.yaml12
-rw-r--r--dts/upstream/Bindings/net/snps,dwmac.yaml20
-rw-r--r--dts/upstream/Bindings/net/starfive,jh7110-dwmac.yaml28
-rw-r--r--dts/upstream/Bindings/net/stm32-dwmac.yaml11
-rw-r--r--dts/upstream/Bindings/net/ti,cpsw-switch.yaml1
-rw-r--r--dts/upstream/Bindings/net/ti,icssg-prueth.yaml35
-rw-r--r--dts/upstream/Bindings/net/ti,k3-am654-cpsw-nuss.yaml1
-rw-r--r--dts/upstream/Bindings/net/ti,k3-am654-cpts.yaml1
-rw-r--r--dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml1
-rw-r--r--dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml6
-rw-r--r--dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml3
-rw-r--r--dts/upstream/Bindings/nvmem/qcom,qfprom.yaml4
-rw-r--r--dts/upstream/Bindings/nvmem/qcom,spmi-sdam.yaml2
-rw-r--r--dts/upstream/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml87
-rw-r--r--dts/upstream/Bindings/pci/amlogic,axg-pcie.yaml2
-rw-r--r--dts/upstream/Bindings/pci/apple,pcie.yaml2
-rw-r--r--dts/upstream/Bindings/pci/brcm,iproc-pcie.yaml2
-rw-r--r--dts/upstream/Bindings/pci/brcm,stb-pcie.yaml2
-rw-r--r--dts/upstream/Bindings/pci/cdns,cdns-pcie-host.yaml3
-rw-r--r--dts/upstream/Bindings/pci/cdns-pcie-host.yaml2
-rw-r--r--dts/upstream/Bindings/pci/faraday,ftpci100.yaml2
-rw-r--r--dts/upstream/Bindings/pci/fsl,layerscape-pcie-ep.yaml102
-rw-r--r--dts/upstream/Bindings/pci/fsl,layerscape-pcie.yaml167
-rw-r--r--dts/upstream/Bindings/pci/host-generic-pci.yaml2
-rw-r--r--dts/upstream/Bindings/pci/intel,ixp4xx-pci.yaml2
-rw-r--r--dts/upstream/Bindings/pci/intel,keembay-pcie.yaml2
-rw-r--r--dts/upstream/Bindings/pci/layerscape-pci.txt79
-rw-r--r--dts/upstream/Bindings/pci/loongson.yaml2
-rw-r--r--dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml7
-rw-r--r--dts/upstream/Bindings/pci/mediatek-pcie-gen3.yaml2
-rw-r--r--dts/upstream/Bindings/pci/microchip,pcie-host.yaml5
-rw-r--r--dts/upstream/Bindings/pci/qcom,pcie-common.yaml2
-rw-r--r--dts/upstream/Bindings/pci/qcom,pcie-sm8350.yaml22
-rw-r--r--dts/upstream/Bindings/pci/qcom,pcie.yaml2
-rw-r--r--dts/upstream/Bindings/pci/rcar-gen4-pci-ep.yaml4
-rw-r--r--dts/upstream/Bindings/pci/rcar-gen4-pci-host.yaml4
-rw-r--r--dts/upstream/Bindings/pci/rcar-pci-host.yaml5
-rw-r--r--dts/upstream/Bindings/pci/renesas,pci-rcar-gen2.yaml2
-rw-r--r--dts/upstream/Bindings/pci/rockchip,rk3399-pcie.yaml3
-rw-r--r--dts/upstream/Bindings/pci/snps,dw-pcie.yaml2
-rw-r--r--dts/upstream/Bindings/pci/ti,am65-pci-host.yaml22
-rw-r--r--dts/upstream/Bindings/pci/ti,j721e-pci-host.yaml5
-rw-r--r--dts/upstream/Bindings/pci/versatile.yaml2
-rw-r--r--dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml9
-rw-r--r--dts/upstream/Bindings/pci/xlnx,axi-pcie-host.yaml2
-rw-r--r--dts/upstream/Bindings/pci/xlnx,nwl-pcie.yaml4
-rw-r--r--dts/upstream/Bindings/pci/xlnx,xdma-host.yaml2
-rw-r--r--dts/upstream/Bindings/phy/brcm,sata-phy.yaml8
-rw-r--r--dts/upstream/Bindings/phy/fsl,imx8mp-hdmi-phy.yaml62
-rw-r--r--dts/upstream/Bindings/phy/mediatek,mt7988-xfi-tphy.yaml80
-rw-r--r--dts/upstream/Bindings/phy/phy-rockchip-usbdp.yaml148
-rw-r--r--dts/upstream/Bindings/phy/phy-stm32-usbphyc.yaml4
-rw-r--r--dts/upstream/Bindings/phy/qcom,edp-phy.yaml1
-rw-r--r--dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml28
-rw-r--r--dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml19
-rw-r--r--dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml2
-rw-r--r--dts/upstream/Bindings/phy/qcom,snps-eusb2-repeater.yaml4
-rw-r--r--dts/upstream/Bindings/phy/qcom,usb-snps-femto-v2.yaml5
-rw-r--r--dts/upstream/Bindings/phy/rockchip,pcie3-phy.yaml10
-rw-r--r--dts/upstream/Bindings/phy/samsung,ufs-phy.yaml1
-rw-r--r--dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml113
-rw-r--r--dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml41
-rw-r--r--dts/upstream/Bindings/pinctrl/qcom,pmic-mpp.yaml1
-rw-r--r--dts/upstream/Bindings/pinctrl/qcom,sm4450-tlmm.yaml52
-rw-r--r--dts/upstream/Bindings/pinctrl/samsung,pinctrl.yaml21
-rw-r--r--dts/upstream/Bindings/platform/acer,aspire1-ec.yaml60
-rw-r--r--dts/upstream/Bindings/power/supply/maxim,max8903.yaml2
-rw-r--r--dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml3
-rw-r--r--dts/upstream/Bindings/pwm/google,cros-ec-pwm.yaml1
-rw-r--r--dts/upstream/Bindings/pwm/marvell,pxa-pwm.yaml1
-rw-r--r--dts/upstream/Bindings/pwm/mediatek,mt2712-pwm.yaml1
-rw-r--r--dts/upstream/Bindings/pwm/mediatek,pwm-disp.yaml2
-rw-r--r--dts/upstream/Bindings/pwm/pwm-bcm2835.yaml1
-rw-r--r--dts/upstream/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml1
-rw-r--r--dts/upstream/Bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml37
-rw-r--r--dts/upstream/Bindings/regulator/fixed-regulator.yaml7
-rw-r--r--dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml1
-rw-r--r--dts/upstream/Bindings/regulator/qcom,usb-vbus-regulator.yaml1
-rw-r--r--dts/upstream/Bindings/regulator/st,stm32-vrefbuf.yaml4
-rw-r--r--dts/upstream/Bindings/regulator/ti,tps62864.yaml2
-rw-r--r--dts/upstream/Bindings/remoteproc/mtk,scp.yaml2
-rw-r--r--dts/upstream/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml1
-rw-r--r--dts/upstream/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml6
-rw-r--r--dts/upstream/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml6
-rw-r--r--dts/upstream/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml6
-rw-r--r--dts/upstream/Bindings/remoteproc/qcom,smd-edge.yaml3
-rw-r--r--dts/upstream/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml279
-rw-r--r--dts/upstream/Bindings/riscv/starfive.yaml1
-rw-r--r--dts/upstream/Bindings/rng/microsoft,vmgenid.yaml49
-rw-r--r--dts/upstream/Bindings/rng/st,stm32-rng.yaml4
-rw-r--r--dts/upstream/Bindings/rtc/alphascale,asm9260-rtc.txt19
-rw-r--r--dts/upstream/Bindings/rtc/alphascale,asm9260-rtc.yaml50
-rw-r--r--dts/upstream/Bindings/rtc/armada-380-rtc.txt24
-rw-r--r--dts/upstream/Bindings/rtc/digicolor-rtc.txt17
-rw-r--r--dts/upstream/Bindings/rtc/fsl,stmp3xxx-rtc.yaml51
-rw-r--r--dts/upstream/Bindings/rtc/google,goldfish-rtc.txt17
-rw-r--r--dts/upstream/Bindings/rtc/lpc32xx-rtc.txt15
-rw-r--r--dts/upstream/Bindings/rtc/marvell,armada-380-rtc.yaml51
-rw-r--r--dts/upstream/Bindings/rtc/marvell,pxa-rtc.yaml40
-rw-r--r--dts/upstream/Bindings/rtc/maxim,ds1742.txt12
-rw-r--r--dts/upstream/Bindings/rtc/nxp,lpc1788-rtc.txt21
-rw-r--r--dts/upstream/Bindings/rtc/nxp,lpc1788-rtc.yaml58
-rw-r--r--dts/upstream/Bindings/rtc/orion-rtc.txt18
-rw-r--r--dts/upstream/Bindings/rtc/pxa-rtc.txt14
-rw-r--r--dts/upstream/Bindings/rtc/rtc-aspeed.txt22
-rw-r--r--dts/upstream/Bindings/rtc/spear-rtc.txt15
-rw-r--r--dts/upstream/Bindings/rtc/stmp3xxx-rtc.txt21
-rw-r--r--dts/upstream/Bindings/rtc/trivial-rtc.yaml21
-rw-r--r--dts/upstream/Bindings/rtc/twl-rtc.txt11
-rw-r--r--dts/upstream/Bindings/rtc/via,vt8500-rtc.txt15
-rw-r--r--dts/upstream/Bindings/serial/actions,owl-uart.txt16
-rw-r--r--dts/upstream/Bindings/serial/actions,owl-uart.yaml48
-rw-r--r--dts/upstream/Bindings/serial/amlogic,meson-uart.yaml4
-rw-r--r--dts/upstream/Bindings/serial/brcm,bcm2835-aux-uart.txt18
-rw-r--r--dts/upstream/Bindings/serial/brcm,bcm2835-aux-uart.yaml46
-rw-r--r--dts/upstream/Bindings/serial/cdns,uart.yaml3
-rw-r--r--dts/upstream/Bindings/serial/fsl,s32-linflexuart.yaml4
-rw-r--r--dts/upstream/Bindings/serial/renesas,scif.yaml1
-rw-r--r--dts/upstream/Bindings/serial/st,stm32-uart.yaml4
-rw-r--r--dts/upstream/Bindings/soc/qcom/qcom,pmic-glink.yaml14
-rw-r--r--dts/upstream/Bindings/soc/qcom/qcom,wcnss.yaml4
-rw-r--r--dts/upstream/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml51
-rw-r--r--dts/upstream/Bindings/soc/renesas/renesas.yaml8
-rw-r--r--dts/upstream/Bindings/soc/samsung/samsung,exynos-sysreg.yaml2
-rw-r--r--dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml6
-rw-r--r--dts/upstream/Bindings/sound/davinci-mcbsp.txt50
-rw-r--r--dts/upstream/Bindings/sound/davinci-mcbsp.yaml113
-rw-r--r--dts/upstream/Bindings/sound/fsl,audmix.txt50
-rw-r--r--dts/upstream/Bindings/sound/fsl,audmix.yaml83
-rw-r--r--dts/upstream/Bindings/sound/fsl,esai.txt68
-rw-r--r--dts/upstream/Bindings/sound/fsl,esai.yaml118
-rw-r--r--dts/upstream/Bindings/sound/fsl,imx-asrc.yaml14
-rw-r--r--dts/upstream/Bindings/sound/fsl,imx-audio-spdif.yaml66
-rw-r--r--dts/upstream/Bindings/sound/fsl,sai.yaml6
-rw-r--r--dts/upstream/Bindings/sound/fsl,spdif.yaml35
-rw-r--r--dts/upstream/Bindings/sound/fsl,ssi.txt87
-rw-r--r--dts/upstream/Bindings/sound/fsl,ssi.yaml194
-rw-r--r--dts/upstream/Bindings/sound/fsl-asoc-card.txt117
-rw-r--r--dts/upstream/Bindings/sound/fsl-asoc-card.yaml197
-rw-r--r--dts/upstream/Bindings/sound/imx-audio-spdif.txt36
-rw-r--r--dts/upstream/Bindings/sound/mediatek,mt2701-wm8960.yaml54
-rw-r--r--dts/upstream/Bindings/sound/mt2701-wm8960.txt24
-rw-r--r--dts/upstream/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml131
-rw-r--r--dts/upstream/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml120
-rw-r--r--dts/upstream/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml139
-rw-r--r--dts/upstream/Bindings/sound/mt8195-mt6359.yaml134
-rw-r--r--dts/upstream/Bindings/sound/nuvoton,nau8325.yaml80
-rw-r--r--dts/upstream/Bindings/sound/nuvoton,nau8821.yaml7
-rw-r--r--dts/upstream/Bindings/sound/nvidia,tegra20-ac97.txt36
-rw-r--r--dts/upstream/Bindings/sound/nvidia,tegra20-ac97.yaml82
-rw-r--r--dts/upstream/Bindings/sound/nvidia,tegra20-das.txt12
-rw-r--r--dts/upstream/Bindings/sound/nvidia,tegra20-das.yaml36
-rw-r--r--dts/upstream/Bindings/sound/nvidia,tegra30-i2s.txt27
-rw-r--r--dts/upstream/Bindings/sound/nvidia,tegra30-i2s.yaml67
-rw-r--r--dts/upstream/Bindings/sound/qcom,sm8250.yaml2
-rw-r--r--dts/upstream/Bindings/sound/renesas,rsnd.yaml5
-rw-r--r--dts/upstream/Bindings/sound/rockchip,rk3308-codec.yaml98
-rw-r--r--dts/upstream/Bindings/sound/st,stm32-i2s.yaml4
-rw-r--r--dts/upstream/Bindings/sound/st,stm32-sai.yaml6
-rw-r--r--dts/upstream/Bindings/sound/st,stm32-spdifrx.yaml4
-rw-r--r--dts/upstream/Bindings/sound/ti,pcm1681.txt15
-rw-r--r--dts/upstream/Bindings/sound/ti,pcm1681.yaml43
-rw-r--r--dts/upstream/Bindings/sound/ti,pcm6240.yaml177
-rw-r--r--dts/upstream/Bindings/sound/wlf,wm8776.yaml41
-rw-r--r--dts/upstream/Bindings/sound/wlf,wm8974.txt15
-rw-r--r--dts/upstream/Bindings/sound/wlf,wm8974.yaml41
-rw-r--r--dts/upstream/Bindings/sound/wm8776.txt18
-rw-r--r--dts/upstream/Bindings/sound/xmos,xvf3500.yaml63
-rw-r--r--dts/upstream/Bindings/spi/airoha,en7581-snand.yaml65
-rw-r--r--dts/upstream/Bindings/spi/cdns,qspi-nor.yaml8
-rw-r--r--dts/upstream/Bindings/spi/marvell,armada-3700-spi.yaml55
-rw-r--r--dts/upstream/Bindings/spi/renesas,sh-msiof.yaml1
-rw-r--r--dts/upstream/Bindings/spi/spi-armada-3700.txt25
-rw-r--r--dts/upstream/Bindings/spi/st,stm32-qspi.yaml4
-rw-r--r--dts/upstream/Bindings/spi/st,stm32-spi.yaml4
-rw-r--r--dts/upstream/Bindings/spi/ti,qspi.yaml96
-rw-r--r--dts/upstream/Bindings/spi/ti_qspi.txt53
-rw-r--r--dts/upstream/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml17
-rw-r--r--dts/upstream/Bindings/spmi/qcom,spmi-pmic-arb.yaml1
-rw-r--r--dts/upstream/Bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml136
-rw-r--r--dts/upstream/Bindings/thermal/amlogic,thermal.yaml12
-rw-r--r--dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml24
-rw-r--r--dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml6
-rw-r--r--dts/upstream/Bindings/thermal/qcom-lmh.yaml12
-rw-r--r--dts/upstream/Bindings/thermal/st,stih407-thermal.yaml58
-rw-r--r--dts/upstream/Bindings/thermal/st-thermal.txt32
-rw-r--r--dts/upstream/Bindings/timer/renesas,cmt.yaml2
-rw-r--r--dts/upstream/Bindings/timer/renesas,ostm.yaml2
-rw-r--r--dts/upstream/Bindings/timer/renesas,tmu.yaml1
-rw-r--r--dts/upstream/Bindings/tpm/ibm,vtpm.yaml4
-rw-r--r--dts/upstream/Bindings/tpm/tcg,tpm-tis-i2c.yaml1
-rw-r--r--dts/upstream/Bindings/trivial-devices.yaml6
-rw-r--r--dts/upstream/Bindings/ufs/samsung,exynos-ufs.yaml38
-rw-r--r--dts/upstream/Bindings/usb/chipidea,usb2-common.yaml200
-rw-r--r--dts/upstream/Bindings/usb/chipidea,usb2-imx.yaml287
-rw-r--r--dts/upstream/Bindings/usb/ci-hdrc-usb2.yaml360
-rw-r--r--dts/upstream/Bindings/usb/cypress,hx3.yaml1
-rw-r--r--dts/upstream/Bindings/usb/dwc2.yaml5
-rw-r--r--dts/upstream/Bindings/usb/fsl,usbmisc.yaml1
-rw-r--r--dts/upstream/Bindings/usb/mediatek,mtk-xhci.yaml1
-rw-r--r--dts/upstream/Bindings/usb/microchip,usb2514.yaml63
-rw-r--r--dts/upstream/Bindings/usb/qcom,dwc3.yaml41
-rw-r--r--dts/upstream/Bindings/usb/qcom,pmic-typec.yaml35
-rw-r--r--dts/upstream/Bindings/usb/realtek,rts5411.yaml1
-rw-r--r--dts/upstream/Bindings/usb/renesas,usbhs.yaml6
-rw-r--r--dts/upstream/Bindings/usb/samsung,exynos-dwc3.yaml18
-rw-r--r--dts/upstream/Bindings/usb/snps,dwc3.yaml13
-rw-r--r--dts/upstream/Bindings/usb/usb-uhci.txt18
-rw-r--r--dts/upstream/Bindings/usb/usb-uhci.yaml75
-rw-r--r--dts/upstream/Bindings/vendor-prefixes.yaml10
-rw-r--r--dts/upstream/Bindings/watchdog/aspeed,ast2400-wdt.yaml142
-rw-r--r--dts/upstream/Bindings/watchdog/aspeed-wdt.txt73
-rw-r--r--dts/upstream/Bindings/watchdog/twl4030-wdt.txt10
-rw-r--r--dts/upstream/include/dt-bindings/arm/mhuv3-dt.h13
-rw-r--r--dts/upstream/include/dt-bindings/arm/qcom,ids.h1
-rw-r--r--dts/upstream/include/dt-bindings/clock/google,gs101.h116
-rw-r--r--dts/upstream/include/dt-bindings/clock/loongson,ls2k-clk.h54
-rw-r--r--dts/upstream/include/dt-bindings/clock/nxp,imx95-clock.h28
-rw-r--r--dts/upstream/include/dt-bindings/clock/r8a73a4-clock.h4
-rw-r--r--dts/upstream/include/dt-bindings/clock/r9a07g043-cpg.h58
-rw-r--r--dts/upstream/include/dt-bindings/clock/r9a07g044-cpg.h58
-rw-r--r--dts/upstream/include/dt-bindings/clock/r9a07g054-cpg.h58
-rw-r--r--dts/upstream/include/dt-bindings/clock/r9a08g045-cpg.h70
-rw-r--r--dts/upstream/include/dt-bindings/clock/rk3568-cru.h1
-rw-r--r--dts/upstream/include/dt-bindings/input/linux-event-codes.h2
-rw-r--r--dts/upstream/include/dt-bindings/leds/common.h4
-rw-r--r--dts/upstream/include/dt-bindings/net/ti-dp83867.h4
-rw-r--r--dts/upstream/include/dt-bindings/net/ti-dp83869.h4
-rw-r--r--dts/upstream/include/dt-bindings/phy/phy-qcom-qmp.h4
-rw-r--r--dts/upstream/include/dt-bindings/pinctrl/samsung.h95
-rw-r--r--dts/upstream/include/dt-bindings/reset/rockchip,rk3588-cru.h2
-rw-r--r--dts/upstream/include/dt-bindings/reset/st,stm32mp25-rcc.h2
-rw-r--r--dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h26
-rwxr-xr-xdts/upstream/scripts/cronjob4
-rwxr-xr-xdts/upstream/scripts/filter.sh6
-rwxr-xr-xdts/upstream/scripts/git-filter-branch673
-rw-r--r--dts/upstream/src/arm/allwinner/sun5i-a13-pocketbook-614-plus.dts218
-rw-r--r--dts/upstream/src/arm/allwinner/sun5i-a13.dtsi4
-rw-r--r--dts/upstream/src/arm/allwinner/sun5i-gr8-chip-pro.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun5i-r8-chip.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun6i-a31-hummingbird.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun6i-a31.dtsi16
-rw-r--r--dts/upstream/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20-cubietruck.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20-hummingbird.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun7i-a20.dtsi4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a23-a33.dtsi14
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a33.dtsi10
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a83t-tbs-a711.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-a83t.dtsi8
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts5
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts6
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-beelink-x2.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-r1.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-2.dts4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-lite.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-q8-common.dtsi4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-r16-parrot.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-r40-oka40i-c.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-s3-pinecube.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-v3s.dtsi4
-rw-r--r--dts/upstream/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts2
-rw-r--r--dts/upstream/src/arm/allwinner/sun9i-a80.dtsi4
-rw-r--r--dts/upstream/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi2
-rw-r--r--dts/upstream/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi2
-rw-r--r--dts/upstream/src/arm/allwinner/sunxi-h3-h5.dtsi4
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts1
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts9
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c256d4i.dts322
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts13
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts324
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-x570d4u.dts360
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-asus-x4tf.dts581
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts4
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-cloudripper.dts544
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts4
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-harma.dts648
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-minerva-cmc.dts265
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-minerva.dts543
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts15
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts2
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts8
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-system1.dts1623
-rw-r--r--dts/upstream/src/arm/aspeed/aspeed-g6.dtsi4
-rw-r--r--dts/upstream/src/arm/aspeed/ibm-power10-dual.dtsi2
-rw-r--r--dts/upstream/src/arm/broadcom/bcm2711-rpi-4-b.dts29
-rw-r--r--dts/upstream/src/arm/broadcom/bcm2711-rpi-400.dts1
-rw-r--r--dts/upstream/src/arm/broadcom/bcm2711-rpi-cm4-io.dts33
-rw-r--r--dts/upstream/src/arm/broadcom/bcm2711-rpi.dtsi34
-rw-r--r--dts/upstream/src/arm/broadcom/bcm2711.dtsi12
-rw-r--r--dts/upstream/src/arm/broadcom/bcm2835-rpi-common.dtsi7
-rw-r--r--dts/upstream/src/arm/broadcom/bcm2835-rpi.dtsi23
-rw-r--r--dts/upstream/src/arm/broadcom/bcm283x.dtsi24
-rw-r--r--dts/upstream/src/arm/broadcom/bcm4709-asus-rt-ac3200.dts150
-rw-r--r--dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts13
-rw-r--r--dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi133
-rw-r--r--dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac5300.dts156
-rw-r--r--dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts65
-rw-r--r--dts/upstream/src/arm/nvidia/tegra20-colibri.dtsi4
-rw-r--r--dts/upstream/src/arm/nvidia/tegra20-paz00.dts43
-rw-r--r--dts/upstream/src/arm/nxp/imx/e60k02.dtsi2
-rw-r--r--dts/upstream/src/arm/nxp/imx/e70k02.dtsi2
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi78
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx53-kp-ddc.dts2
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx53-kp.dtsi10
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx53-mba53.dts2
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx53-ppd.dts6
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx53-qsb-common.dtsi2
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx53-qsb-hdmi.dtso6
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx53-tqma53.dtsi8
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6dl-mamoj.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6q-ba16.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6q-bosch-acc.dts10
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6q-kp.dtsi6
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6q-novena.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6q-pistachio.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6q-prti6q.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6q-var-dt6customboard.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-emcon.dtsi9
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-icore.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-mba6.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi6
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi9
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi6
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi6
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi7
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi9
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-sabresd.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-savageboard.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi1
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl-udoo.dtsi25
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6qdl.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6sl-evk.dts4
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts4
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6sll-evk.dts4
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6sll.dtsi1
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts6
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6sx-sdb.dtsi8
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts12
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6sx.dtsi7
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ul-geam.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ul-isiot.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ul-pico.dtsi3
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts19
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts19
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi424
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi155
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-master.dts4
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slave.dts2
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts2
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx6ull-uti260b.dts566
-rw-r--r--dts/upstream/src/arm/nxp/imx/imx7s.dtsi9
-rw-r--r--dts/upstream/src/arm/qcom/msm8226-motorola-falcon.dts359
-rw-r--r--dts/upstream/src/arm/qcom/qcom-apq8064.dtsi12
-rw-r--r--dts/upstream/src/arm/qcom/qcom-apq8084.dtsi2
-rw-r--r--dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi45
-rw-r--r--dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi30
-rw-r--r--dts/upstream/src/arm/qcom/qcom-msm8916-smp.dtsi2
-rw-r--r--dts/upstream/src/arm/qcom/qcom-msm8974.dtsi6
-rw-r--r--dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte-common.dtsi818
-rw-r--r--dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts813
-rw-r--r--dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-kltechn.dts16
-rw-r--r--dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts574
-rw-r--r--dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi539
-rw-r--r--dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts44
-rw-r--r--dts/upstream/src/arm/qcom/qcom-sdx55.dtsi10
-rw-r--r--dts/upstream/src/arm/renesas/r7s72100.dtsi8
-rw-r--r--dts/upstream/src/arm/renesas/r8a73a4.dtsi37
-rw-r--r--dts/upstream/src/arm/renesas/r8a7742.dtsi58
-rw-r--r--dts/upstream/src/arm/renesas/r8a7743.dtsi58
-rw-r--r--dts/upstream/src/arm/renesas/r8a7744.dtsi58
-rw-r--r--dts/upstream/src/arm/renesas/r8a7745.dtsi58
-rw-r--r--dts/upstream/src/arm/renesas/r8a77470.dtsi44
-rw-r--r--dts/upstream/src/arm/renesas/r8a7790.dtsi58
-rw-r--r--dts/upstream/src/arm/renesas/r8a7791.dtsi58
-rw-r--r--dts/upstream/src/arm/renesas/r8a7792.dtsi59
-rw-r--r--dts/upstream/src/arm/renesas/r8a7793.dtsi58
-rw-r--r--dts/upstream/src/arm/renesas/r8a7794.dtsi58
-rw-r--r--dts/upstream/src/arm/renesas/r9a06g032.dtsi1
-rw-r--r--dts/upstream/src/arm/rockchip/rk3066a.dtsi1
-rw-r--r--dts/upstream/src/arm/samsung/exynos3250.dtsi2
-rw-r--r--dts/upstream/src/arm/samsung/exynos4.dtsi3
-rw-r--r--dts/upstream/src/arm/samsung/exynos4210-smdkv310.dts2
-rw-r--r--dts/upstream/src/arm/samsung/exynos4212-tab3.dtsi6
-rw-r--r--dts/upstream/src/arm/samsung/exynos4412-origen.dts2
-rw-r--r--dts/upstream/src/arm/samsung/exynos4412-smdk4412.dts12
-rw-r--r--dts/upstream/src/arm/samsung/exynos5250.dtsi3
-rw-r--r--dts/upstream/src/arm/samsung/exynos5420.dtsi3
-rw-r--r--dts/upstream/src/arm/samsung/exynos5800-peach-pi.dts2
-rw-r--r--dts/upstream/src/arm/samsung/s5pv210.dtsi6
-rw-r--r--dts/upstream/src/arm/st/stm32f746.dtsi17
-rw-r--r--dts/upstream/src/arm/st/stm32f769.dtsi17
-rw-r--r--dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi57
-rw-r--r--dts/upstream/src/arm/st/stm32mp131.dtsi1162
-rw-r--r--dts/upstream/src/arm/st/stm32mp133.dtsi51
-rw-r--r--dts/upstream/src/arm/st/stm32mp135.dtsi11
-rw-r--r--dts/upstream/src/arm/st/stm32mp135f-dk.dts53
-rw-r--r--dts/upstream/src/arm/st/stm32mp13xc.dtsi19
-rw-r--r--dts/upstream/src/arm/st/stm32mp13xf.dtsi19
-rw-r--r--dts/upstream/src/arm/st/stm32mp151.dtsi2801
-rw-r--r--dts/upstream/src/arm/st/stm32mp153.dtsi52
-rw-r--r--dts/upstream/src/arm/st/stm32mp157c-ed1.dts12
-rw-r--r--dts/upstream/src/arm/st/stm32mp15xc.dtsi19
-rw-r--r--dts/upstream/src/arm/ti/keystone/keystone-k2g.dtsi5
-rw-r--r--dts/upstream/src/arm/ti/omap/am33xx.dtsi8
-rw-r--r--dts/upstream/src/arm/ti/omap/am4372.dtsi2
-rw-r--r--dts/upstream/src/arm/ti/omap/dra76x.dtsi63
-rw-r--r--dts/upstream/src/arm/ti/omap/dra7xx-clocks.dtsi270
-rw-r--r--dts/upstream/src/arm/ti/omap/omap3-n900.dts2
-rw-r--r--dts/upstream/src/arm64/actions/s700-cubieboard7.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64-olinuxino.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64-orangepi-win.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64-pinephone.dtsi16
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64-teres-i.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi18
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h313-tanix-tx1.dts183
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts4
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-3.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi.dtsi2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts6
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi2
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi5
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi115
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts5
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h616-x96-mate.dts5
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi19
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi5
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts5
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts5
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts7
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts4
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts327
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts36
-rw-r--r--dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts53
-rw-r--r--dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi2
-rw-r--r--dts/upstream/src/arm64/amazon/alpine-v2.dtsi35
-rw-r--r--dts/upstream/src/arm64/amazon/alpine-v3.dtsi12
-rw-r--r--dts/upstream/src/arm64/amd/elba-16core.dtsi2
-rw-r--r--dts/upstream/src/arm64/amd/elba-asic-common.dtsi2
-rw-r--r--dts/upstream/src/arm64/amd/elba-asic.dts2
-rw-r--r--dts/upstream/src/arm64/amd/elba-flash-parts.dtsi2
-rw-r--r--dts/upstream/src/arm64/amd/elba.dtsi2
-rw-r--r--dts/upstream/src/arm64/amlogic/amlogic-a4-a113l2-ba400.dts42
-rw-r--r--dts/upstream/src/arm64/amlogic/amlogic-a4-common.dtsi66
-rw-r--r--dts/upstream/src/arm64/amlogic/amlogic-a4.dtsi40
-rw-r--r--dts/upstream/src/arm64/amlogic/amlogic-a5-a113x2-av400.dts42
-rw-r--r--dts/upstream/src/arm64/amlogic/amlogic-a5.dtsi40
-rw-r--r--dts/upstream/src/arm64/amlogic/amlogic-t7-reset.h197
-rw-r--r--dts/upstream/src/arm64/amlogic/amlogic-t7.dtsi7
-rw-r--r--dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi70
-rw-r--r--dts/upstream/src/arm64/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts384
-rw-r--r--dts/upstream/src/arm64/amlogic/meson-khadas-vim3-ts050.dtso108
-rw-r--r--dts/upstream/src/arm64/amlogic/meson-s4.dtsi13
-rw-r--r--dts/upstream/src/arm64/apm/apm-merlin.dts2
-rw-r--r--dts/upstream/src/arm64/apm/apm-mustang.dts2
-rw-r--r--dts/upstream/src/arm64/apm/apm-shadowcat.dtsi14
-rw-r--r--dts/upstream/src/arm64/apm/apm-storm.dtsi15
-rw-r--r--dts/upstream/src/arm64/arm/juno-base.dtsi4
-rw-r--r--dts/upstream/src/arm64/arm/juno-scmi.dtsi4
-rw-r--r--dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts2
-rw-r--r--dts/upstream/src/arm64/broadcom/bcmbca/bcm4908.dtsi1
-rw-r--r--dts/upstream/src/arm64/broadcom/bcmbca/bcm94908.dts1
-rw-r--r--dts/upstream/src/arm64/broadcom/northstar2/ns2-svk.dts2
-rw-r--r--dts/upstream/src/arm64/broadcom/northstar2/ns2-xmc.dts2
-rw-r--r--dts/upstream/src/arm64/broadcom/northstar2/ns2.dtsi2
-rw-r--r--dts/upstream/src/arm64/broadcom/stingray/stingray.dtsi2
-rw-r--r--dts/upstream/src/arm64/cavium/thunder-88xx.dtsi22
-rw-r--r--dts/upstream/src/arm64/cavium/thunder2-99xx.dts2
-rw-r--r--dts/upstream/src/arm64/cavium/thunder2-99xx.dtsi3
-rw-r--r--dts/upstream/src/arm64/exynos/exynos5433.dtsi5
-rw-r--r--dts/upstream/src/arm64/exynos/exynos850.dtsi26
-rw-r--r--dts/upstream/src/arm64/exynos/exynosautov9.dtsi12
-rw-r--r--dts/upstream/src/arm64/exynos/google/gs101-oriole.dts46
-rw-r--r--dts/upstream/src/arm64/exynos/google/gs101.dtsi919
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi2
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts2
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3.dts18
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi20
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi2
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi7
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi7
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi5
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi108
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-lx2162a-clearfog.dts1
-rw-r--r--dts/upstream/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi9
-rw-r--r--dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi285
-rw-r--r--dts/upstream/src/arm64/freescale/imx8-ss-cm40.dtsi91
-rw-r--r--dts/upstream/src/arm64/freescale/imx8-ss-img.dtsi2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8dx-colibri-aster.dts16
-rw-r--r--dts/upstream/src/arm64/freescale/imx8dx-colibri-eval-v3.dts16
-rw-r--r--dts/upstream/src/arm64/freescale/imx8dx-colibri-iris-v2.dts16
-rw-r--r--dts/upstream/src/arm64/freescale/imx8dx-colibri-iris.dts16
-rw-r--r--dts/upstream/src/arm64/freescale/imx8dx-colibri.dtsi11
-rw-r--r--dts/upstream/src/arm64/freescale/imx8dx.dtsi13
-rw-r--r--dts/upstream/src/arm64/freescale/imx8dxl-evk.dts37
-rw-r--r--dts/upstream/src/arm64/freescale/imx8dxl.dtsi15
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi19
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm-var-som-symphony.dts1
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi40
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm-verdin-dev.dtsi7
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm-verdin-yavia.dtsi5
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi29
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mm.dtsi9
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mn-ddr3l-evk.dts16
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mn-ddr4-evk.dts16
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mn-evk.dts16
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mn-evk.dtsi45
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mn-var-som-symphony.dts1
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mn.dtsi8
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts1
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts10
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-evk.dts45
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s.dtsi46
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-navqp.dts424
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts38
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi36
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi38
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso13
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts6
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi56
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi12
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi5
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi10
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi53
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mp.dtsi168
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mq-hummingboard-pulse.dts2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mq-librem5-devkit.dts2
-rw-r--r--dts/upstream/src/arm64/freescale/imx8mq.dtsi7
-rw-r--r--dts/upstream/src/arm64/freescale/imx8qm-mek.dts88
-rw-r--r--dts/upstream/src/arm64/freescale/imx8qxp-mek.dts140
-rw-r--r--dts/upstream/src/arm64/freescale/imx8qxp.dtsi1
-rw-r--r--dts/upstream/src/arm64/freescale/imx8ulp-evk.dts84
-rw-r--r--dts/upstream/src/arm64/freescale/imx8ulp.dtsi94
-rw-r--r--dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts398
-rw-r--r--dts/upstream/src/arm64/freescale/imx93.dtsi140
-rw-r--r--dts/upstream/src/arm64/freescale/mba8mx.dtsi14
-rw-r--r--dts/upstream/src/arm64/freescale/s32g2.dtsi37
-rw-r--r--dts/upstream/src/arm64/freescale/s32g274a-evb.dts6
-rw-r--r--dts/upstream/src/arm64/freescale/s32g274a-rdb2.dts6
-rw-r--r--dts/upstream/src/arm64/freescale/s32g3.dtsi233
-rw-r--r--dts/upstream/src/arm64/freescale/s32g399a-rdb3.dts45
-rw-r--r--dts/upstream/src/arm64/hisilicon/hi3798cv200.dtsi43
-rw-r--r--dts/upstream/src/arm64/hisilicon/hi6220-hikey.dts7
-rw-r--r--dts/upstream/src/arm64/hisilicon/hi6220.dtsi2
-rw-r--r--dts/upstream/src/arm64/hisilicon/hip05-d02.dts4
-rw-r--r--dts/upstream/src/arm64/hisilicon/hip05.dtsi12
-rw-r--r--dts/upstream/src/arm64/hisilicon/hip06.dtsi88
-rw-r--r--dts/upstream/src/arm64/hisilicon/hip07.dtsi84
-rw-r--r--dts/upstream/src/arm64/intel/keembay-soc.dtsi2
-rw-r--r--dts/upstream/src/arm64/intel/socfpga_agilex.dtsi2
-rw-r--r--dts/upstream/src/arm64/lg/lg1312-ref.dts2
-rw-r--r--dts/upstream/src/arm64/lg/lg1313-ref.dts2
-rw-r--r--dts/upstream/src/arm64/marvell/ac5-98dx25xx.dtsi2
-rw-r--r--dts/upstream/src/arm64/marvell/armada-3720-eDPU.dts2
-rw-r--r--dts/upstream/src/arm64/marvell/armada-3720-espressobin-ultra.dts98
-rw-r--r--dts/upstream/src/arm64/marvell/armada-3720-turris-mox.dts2
-rw-r--r--dts/upstream/src/arm64/marvell/armada-37xx.dtsi2
-rw-r--r--dts/upstream/src/arm64/marvell/armada-ap80x.dtsi2
-rw-r--r--dts/upstream/src/arm64/marvell/cn9130-crb.dtsi13
-rw-r--r--dts/upstream/src/arm64/marvell/cn9130-db.dtsi18
-rw-r--r--dts/upstream/src/arm64/marvell/cn9131-db.dtsi8
-rw-r--r--dts/upstream/src/arm64/marvell/cn9132-db.dtsi12
-rw-r--r--dts/upstream/src/arm64/mediatek/mt8516.dtsi2
-rw-r--r--dts/upstream/src/arm64/microchip/sparx5.dtsi4
-rw-r--r--dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi149
-rw-r--r--dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi35
-rw-r--r--dts/upstream/src/arm64/nuvoton/nuvoton-npcm845-evb.dts2
-rw-r--r--dts/upstream/src/arm64/nvidia/tegra132-norrin.dts4
-rw-r--r--dts/upstream/src/arm64/nvidia/tegra132.dtsi2
-rw-r--r--dts/upstream/src/arm64/nvidia/tegra210-smaug.dts2
-rw-r--r--dts/upstream/src/arm64/nvidia/tegra210.dtsi2
-rw-r--r--dts/upstream/src/arm64/nvidia/tegra234.dtsi16
-rw-r--r--dts/upstream/src/arm64/qcom/apq8016-sbc.dts12
-rw-r--r--dts/upstream/src/arm64/qcom/ipq6018.dtsi10
-rw-r--r--dts/upstream/src/arm64/qcom/ipq8074-hk10.dtsi2
-rw-r--r--dts/upstream/src/arm64/qcom/ipq8074.dtsi41
-rw-r--r--dts/upstream/src/arm64/qcom/msm8916-longcheer-l8150.dts2
-rw-r--r--dts/upstream/src/arm64/qcom/msm8916-mtp.dts2
-rw-r--r--dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi6
-rw-r--r--dts/upstream/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi6
-rw-r--r--dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi83
-rw-r--r--dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi12
-rw-r--r--dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts6
-rw-r--r--dts/upstream/src/arm64/qcom/msm8953.dtsi14
-rw-r--r--dts/upstream/src/arm64/qcom/msm8996.dtsi30
-rw-r--r--dts/upstream/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi67
-rw-r--r--dts/upstream/src/arm64/qcom/msm8998.dtsi10
-rw-r--r--dts/upstream/src/arm64/qcom/pm6150.dtsi8
-rw-r--r--dts/upstream/src/arm64/qcom/pm6150l.dtsi10
-rw-r--r--dts/upstream/src/arm64/qcom/qcm2290.dtsi58
-rw-r--r--dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts2
-rw-r--r--dts/upstream/src/arm64/qcom/qcm6490-idp.dts189
-rw-r--r--dts/upstream/src/arm64/qcom/qcs404-evb.dtsi2
-rw-r--r--dts/upstream/src/arm64/qcom/qcs404.dtsi10
-rw-r--r--dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts251
-rw-r--r--dts/upstream/src/arm64/qcom/qdu1000.dtsi18
-rw-r--r--dts/upstream/src/arm64/qcom/qrb2210-rb1.dts61
-rw-r--r--dts/upstream/src/arm64/qcom/qrb4210-rb2.dts1
-rw-r--r--dts/upstream/src/arm64/qcom/sa8155p-adp.dts2
-rw-r--r--dts/upstream/src/arm64/qcom/sa8775p.dtsi22
-rw-r--r--dts/upstream/src/arm64/qcom/sc7180-acer-aspire1.dts40
-rw-r--r--dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi1
-rw-r--r--dts/upstream/src/arm64/qcom/sc7180.dtsi10
-rw-r--r--dts/upstream/src/arm64/qcom/sc7280.dtsi24
-rw-r--r--dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts59
-rw-r--r--dts/upstream/src/arm64/qcom/sc8180x.dtsi64
-rw-r--r--dts/upstream/src/arm64/qcom/sc8280xp-crd.dts3
-rw-r--r--dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts122
-rw-r--r--dts/upstream/src/arm64/qcom/sc8280xp.dtsi189
-rw-r--r--dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi9
-rw-r--r--dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts31
-rw-r--r--dts/upstream/src/arm64/qcom/sdm670-google-sargo.dts64
-rw-r--r--dts/upstream/src/arm64/qcom/sdm845-db845c.dts6
-rw-r--r--dts/upstream/src/arm64/qcom/sdm845.dtsi20
-rw-r--r--dts/upstream/src/arm64/qcom/sdx75.dtsi4
-rw-r--r--dts/upstream/src/arm64/qcom/sm6115.dtsi1
-rw-r--r--dts/upstream/src/arm64/qcom/sm6350.dtsi119
-rw-r--r--dts/upstream/src/arm64/qcom/sm8150-hdk.dts16
-rw-r--r--dts/upstream/src/arm64/qcom/sm8150.dtsi20
-rw-r--r--dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi11
-rw-r--r--dts/upstream/src/arm64/qcom/sm8250.dtsi30
-rw-r--r--dts/upstream/src/arm64/qcom/sm8350-hdk.dts1
-rw-r--r--dts/upstream/src/arm64/qcom/sm8350.dtsi26
-rw-r--r--dts/upstream/src/arm64/qcom/sm8450-hdk.dts1
-rw-r--r--dts/upstream/src/arm64/qcom/sm8450-qrd.dts8
-rw-r--r--dts/upstream/src/arm64/qcom/sm8450.dtsi23
-rw-r--r--dts/upstream/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts779
-rw-r--r--dts/upstream/src/arm64/qcom/sm8550.dtsi42
-rw-r--r--dts/upstream/src/arm64/qcom/sm8650-mtp.dts4
-rw-r--r--dts/upstream/src/arm64/qcom/sm8650-qrd.dts12
-rw-r--r--dts/upstream/src/arm64/qcom/sm8650.dtsi255
-rw-r--r--dts/upstream/src/arm64/qcom/x1e80100-crd.dts60
-rw-r--r--dts/upstream/src/arm64/qcom/x1e80100-pmics.dtsi51
-rw-r--r--dts/upstream/src/arm64/qcom/x1e80100-qcp.dts36
-rw-r--r--dts/upstream/src/arm64/qcom/x1e80100.dtsi56
-rw-r--r--dts/upstream/src/arm64/realtek/rtd129x.dtsi2
-rw-r--r--dts/upstream/src/arm64/realtek/rtd139x.dtsi2
-rw-r--r--dts/upstream/src/arm64/realtek/rtd16xx.dtsi4
-rw-r--r--dts/upstream/src/arm64/renesas/r8a77970-eagle-function-expansion.dtso214
-rw-r--r--dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts6
-rw-r--r--dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts27
-rw-r--r--dts/upstream/src/arm64/renesas/r8a779h0.dtsi537
-rw-r--r--dts/upstream/src/arm64/renesas/r9a07g043.dtsi3
-rw-r--r--dts/upstream/src/arm64/renesas/r9a07g043u.dtsi4
-rw-r--r--dts/upstream/src/arm64/renesas/r9a07g044.dtsi2
-rw-r--r--dts/upstream/src/arm64/renesas/r9a07g054.dtsi2
-rw-r--r--dts/upstream/src/arm64/renesas/rzg2ul-smarc.dtsi58
-rw-r--r--dts/upstream/src/arm64/renesas/rzg3s-smarc-som.dtsi6
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts18
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3308.dtsi56
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3326-gameforce-chi.dts809
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts4
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3328.dtsi37
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3368-evb.dtsi2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3368-orion-r68-meta.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3368-r88.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3368.dtsi5
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3399-gru.dtsi2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3399-rock-4c-plus.dts4
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3399-rock-pi-4.dtsi4
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353p.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353v.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg503.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi5
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-powkiddy-x55.dts1
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts4
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts726
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-soquartz-blade.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-soquartz-cm4.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-soquartz-model-a.dts2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3568-mecsbc.dts404
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts16
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3568-wolfvision-pf5-io-expander.dtso137
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3568-wolfvision-pf5.dts528
-rw-r--r--dts/upstream/src/arm64/rockchip/rk356x.dtsi41
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi5
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi2
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi8
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts161
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-fet3588-c.dtsi558
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts5
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-ok3588-c.dts409
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-orangepi-5-plus.dts1
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts17
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts25
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi5
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts9
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts71
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588s-khadas-edge2.dts685
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts99
-rw-r--r--dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts22
-rw-r--r--dts/upstream/src/arm64/socionext/uniphier-ld11-global.dts4
-rw-r--r--dts/upstream/src/arm64/socionext/uniphier-ld20-global.dts4
-rw-r--r--dts/upstream/src/arm64/sprd/sc9860.dtsi58
-rw-r--r--dts/upstream/src/arm64/sprd/sc9863a.dtsi2
-rw-r--r--dts/upstream/src/arm64/sprd/sharkl3.dtsi18
-rw-r--r--dts/upstream/src/arm64/sprd/sp9860g-1h10.dts30
-rw-r--r--dts/upstream/src/arm64/sprd/whale2.dtsi2
-rw-r--r--dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi82
-rw-r--r--dts/upstream/src/arm64/st/stm32mp251.dtsi535
-rw-r--r--dts/upstream/src/arm64/st/stm32mp253.dtsi7
-rw-r--r--dts/upstream/src/arm64/st/stm32mp255.dtsi33
-rw-r--r--dts/upstream/src/arm64/st/stm32mp257f-ev1.dts34
-rw-r--r--dts/upstream/src/arm64/synaptics/berlin4ct.dtsi2
-rw-r--r--dts/upstream/src/arm64/tesla/fsd.dtsi2
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts1
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62-main.dtsi10
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi32
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi8
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62-verdin-mallow.dtsi22
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62-verdin-yavia.dtsi8
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi47
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi10
-rw-r--r--dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts35
-rw-r--r--dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts127
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62a-main.dtsi23
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi10
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62a7-sk.dts21
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62p-main.dtsi55
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62p-wakeup.dtsi10
-rw-r--r--dts/upstream/src/arm64/ti/k3-am62p5-sk.dts72
-rw-r--r--dts/upstream/src/arm64/ti/k3-am642-evm.dts1
-rw-r--r--dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-gpio-fan.dtso50
-rw-r--r--dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts6
-rw-r--r--dts/upstream/src/arm64/ti/k3-am642-sk.dts1
-rw-r--r--dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi32
-rw-r--r--dts/upstream/src/arm64/ti/k3-am65-main.dtsi56
-rw-r--r--dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi7
-rw-r--r--dts/upstream/src/arm64/ti/k3-am65-wakeup.dtsi1
-rw-r--r--dts/upstream/src/arm64/ti/k3-am69-sk.dts12
-rw-r--r--dts/upstream/src/arm64/ti/k3-j7200-main.dtsi10
-rw-r--r--dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi8
-rw-r--r--dts/upstream/src/arm64/ti/k3-j721e-main.dtsi10
-rw-r--r--dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi10
-rw-r--r--dts/upstream/src/arm64/ti/k3-j721s2-main.dtsi12
-rw-r--r--dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi2
-rw-r--r--dts/upstream/src/arm64/ti/k3-j721s2.dtsi1
-rw-r--r--dts/upstream/src/arm64/ti/k3-j722s-evm.dts13
-rw-r--r--dts/upstream/src/arm64/ti/k3-j784s4-evm.dts8
-rw-r--r--dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi12
-rw-r--r--dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi9
-rw-r--r--dts/upstream/src/arm64/ti/k3-j784s4.dtsi1
-rw-r--r--dts/upstream/src/arm64/xilinx/zynqmp.dtsi4
-rw-r--r--dts/upstream/src/loongarch/loongson-2k0500-ref.dts4
-rw-r--r--dts/upstream/src/loongarch/loongson-2k0500.dtsi86
-rw-r--r--dts/upstream/src/loongarch/loongson-2k1000-ref.dts8
-rw-r--r--dts/upstream/src/loongarch/loongson-2k1000.dtsi1
-rw-r--r--dts/upstream/src/loongarch/loongson-2k2000-ref.dts2
-rw-r--r--dts/upstream/src/loongarch/loongson-2k2000.dtsi49
-rw-r--r--dts/upstream/src/mips/ralink/mt7621.dtsi430
-rw-r--r--dts/upstream/src/powerpc/acadia.dts2
-rw-r--r--dts/upstream/src/powerpc/fsl/b4si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/bsc9131rdb.dts2
-rw-r--r--dts/upstream/src/powerpc/fsl/bsc9131si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/bsc9132qds.dts2
-rw-r--r--dts/upstream/src/powerpc/fsl/bsc9132si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/c293pcie.dts2
-rw-r--r--dts/upstream/src/powerpc/fsl/c293si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/mpc8536si-post.dtsi14
-rw-r--r--dts/upstream/src/powerpc/fsl/mpc8544si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/mpc8548si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/mpc8572si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/p1010rdb-pb.dts16
-rw-r--r--dts/upstream/src/powerpc/fsl/p1010rdb-pb_36b.dts16
-rw-r--r--dts/upstream/src/powerpc/fsl/p1010rdb.dtsi16
-rw-r--r--dts/upstream/src/powerpc/fsl/p1010rdb_32b.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/p1010rdb_36b.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/p1010si-post.dtsi16
-rw-r--r--dts/upstream/src/powerpc/fsl/p1020si-post.dtsi5
-rw-r--r--dts/upstream/src/powerpc/fsl/p1021si-post.dtsi5
-rw-r--r--dts/upstream/src/powerpc/fsl/p1022si-post.dtsi7
-rw-r--r--dts/upstream/src/powerpc/fsl/p2020si-post.dtsi17
-rw-r--r--dts/upstream/src/powerpc/fsl/pq3-power.dtsi19
-rw-r--r--dts/upstream/src/powerpc/fsl/t1023si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/t1024rdb.dts2
-rw-r--r--dts/upstream/src/powerpc/fsl/t1040rdb.dts2
-rw-r--r--dts/upstream/src/powerpc/fsl/t1040si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/t1042rdb.dts2
-rw-r--r--dts/upstream/src/powerpc/fsl/t1042rdb_pi.dts2
-rw-r--r--dts/upstream/src/powerpc/fsl/t2081si-post.dtsi2
-rw-r--r--dts/upstream/src/powerpc/fsl/t4240si-post.dtsi2
-rw-r--r--dts/upstream/src/riscv/canaan/canaan_kd233.dts7
-rw-r--r--dts/upstream/src/riscv/canaan/k210.dtsi23
-rw-r--r--dts/upstream/src/riscv/canaan/k210_generic.dts5
-rw-r--r--dts/upstream/src/riscv/canaan/sipeed_maix_bit.dts9
-rw-r--r--dts/upstream/src/riscv/canaan/sipeed_maix_dock.dts7
-rw-r--r--dts/upstream/src/riscv/canaan/sipeed_maix_go.dts9
-rw-r--r--dts/upstream/src/riscv/canaan/sipeed_maixduino.dts10
-rw-r--r--dts/upstream/src/riscv/microchip/mpfs-icicle-kit.dts32
-rw-r--r--dts/upstream/src/riscv/renesas/r9a07g043f.dtsi75
-rw-r--r--dts/upstream/src/riscv/renesas/rzfive-smarc-som.dtsi16
-rw-r--r--dts/upstream/src/riscv/sophgo/cv1800b-milkv-duo.dts21
-rw-r--r--dts/upstream/src/riscv/sophgo/cv1800b.dtsi9
-rw-r--r--dts/upstream/src/riscv/sophgo/cv1812h.dtsi4
-rw-r--r--dts/upstream/src/riscv/sophgo/cv18xx.dtsi132
-rw-r--r--dts/upstream/src/riscv/starfive/jh7100.dtsi2
-rw-r--r--dts/upstream/src/riscv/starfive/jh7110-common.dtsi599
-rw-r--r--dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dts30
-rw-r--r--dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi683
-rw-r--r--dts/upstream/src/riscv/starfive/jh7110.dtsi2
-rw-r--r--dts/upstream/src/riscv/thead/th1520.dtsi54
-rw-r--r--dts/upstream/src/sh/j2_mimas_v2.dts2
1155 files changed, 42985 insertions, 10194 deletions
diff --git a/dts/upstream/Bindings/Makefile b/dts/upstream/Bindings/Makefile
index a8c5c02..bf7d646 100644
--- a/dts/upstream/Bindings/Makefile
+++ b/dts/upstream/Bindings/Makefile
@@ -25,23 +25,25 @@ quiet_cmd_extract_ex = DTEX $@
$(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
$(call if_changed,extract_ex)
-find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+find_all_cmd = find $(src) \( -name '*.yaml' ! \
-name 'processed-schema*' \)
find_cmd = $(find_all_cmd) | \
sed 's|^$(srctree)/||' | \
grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \
sed 's|^|$(srctree)/|'
-CHK_DT_DOCS := $(shell $(find_cmd))
+CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, $(shell $(find_cmd)))
quiet_cmd_yamllint = LINT $(src)
cmd_yamllint = ($(find_cmd) | \
xargs -n200 -P$$(nproc) \
- $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true
+ $(DT_SCHEMA_LINT) -f parsable -c $(src)/.yamllint >&2) \
+ && touch $@ || true
-quiet_cmd_chk_bindings = CHKDT $@
+quiet_cmd_chk_bindings = CHKDT $(src)
cmd_chk_bindings = ($(find_cmd) | \
- xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)) || true
+ xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(src)) \
+ && touch $@ || true
quiet_cmd_mk_schema = SCHEMA $@
cmd_mk_schema = f=$$(mktemp) ; \
@@ -49,12 +51,6 @@ quiet_cmd_mk_schema = SCHEMA $@
$(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
rm -f $$f
-define rule_chkdt
- $(if $(DT_SCHEMA_LINT),$(call echo-cmd,yamllint) $(cmd_yamllint),); \
- $(call echo-cmd,chk_bindings) $(cmd_chk_bindings); \
- $(call echo-cmd,mk_schema) $(cmd_mk_schema)
-endef
-
DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
override DTC_FLAGS := \
@@ -64,12 +60,19 @@ override DTC_FLAGS := \
-Wno-unique_unit_address \
-Wunique_unit_address_if_enabled
-$(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
- $(call if_changed_rule,chkdt)
+$(obj)/processed-schema.json: $(DT_DOCS) check_dtschema_version FORCE
+ $(call if_changed,mk_schema)
+
+targets += .dt-binding.checked .yamllint.checked
+$(obj)/.yamllint.checked: $(DT_DOCS) $(src)/.yamllint FORCE
+ $(if $(DT_SCHEMA_LINT),$(call if_changed,yamllint),)
+
+$(obj)/.dt-binding.checked: $(DT_DOCS) FORCE
+ $(call if_changed,chk_bindings)
always-y += processed-schema.json
-always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dts, $(CHK_DT_DOCS))
-always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dtb, $(CHK_DT_DOCS))
+targets += $(patsubst $(obj)/%,%, $(CHK_DT_EXAMPLES))
+targets += $(patsubst $(obj)/%.dtb,%.dts, $(CHK_DT_EXAMPLES))
# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
# build artifacts here before they are processed by scripts/Makefile.clean
@@ -78,3 +81,6 @@ clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
dt_compatible_check: $(obj)/processed-schema.json
$(Q)$(srctree)/scripts/dtc/dt-extract-compatibles $(srctree) | xargs dt-check-compatible -v -s $<
+
+PHONY += dt_binding_check
+dt_binding_check: $(obj)/.dt-binding.checked $(obj)/.yamllint.checked $(CHK_DT_EXAMPLES)
diff --git a/dts/upstream/Bindings/access-controllers/access-controllers.yaml b/dts/upstream/Bindings/access-controllers/access-controllers.yaml
new file mode 100644
index 0000000..99e2865
--- /dev/null
+++ b/dts/upstream/Bindings/access-controllers/access-controllers.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/access-controllers/access-controllers.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Domain Access Controllers
+
+maintainers:
+ - Oleksii Moisieiev <oleksii_moisieiev@epam.com>
+
+description: |+
+ Common access controllers properties
+
+ Access controllers are in charge of stating which of the hardware blocks under
+ their responsibility (their domain) can be accesssed by which compartment. A
+ compartment can be a cluster of CPUs (or coprocessors), a range of addresses
+ or a group of hardware blocks. An access controller's domain is the set of
+ resources covered by the access controller.
+
+ This device tree binding can be used to bind devices to their access
+ controller provided by access-controllers property. In this case, the device
+ is a consumer and the access controller is the provider.
+
+ An access controller can be represented by any node in the device tree and
+ can provide one or more configuration parameters, needed to control parameters
+ of the consumer device. A consumer node can refer to the provider by phandle
+ and a set of phandle arguments, specified by '#access-controller-cells'
+ property in the access controller node.
+
+ Access controllers are typically used to set/read the permissions of a
+ hardware block and grant access to it. Any of which depends on the access
+ controller. The capabilities of each access controller are defined by the
+ binding of the access controller device.
+
+ Each node can be a consumer for the several access controllers.
+
+# always select the core schema
+select: true
+
+properties:
+ "#access-controller-cells":
+ description:
+ Number of cells in an access-controllers specifier;
+ Can be any value as specified by device tree binding documentation
+ of a particular provider. The node is an access controller.
+
+ access-controller-names:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ A list of access-controllers names, sorted in the same order as
+ access-controllers entries. Consumer drivers will use
+ access-controller-names to match with existing access-controllers entries.
+
+ access-controllers:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ A list of access controller specifiers, as defined by the
+ bindings of the access-controllers provider.
+
+additionalProperties: true
+
+examples:
+ - |
+ clock_controller: access-controllers@50000 {
+ reg = <0x50000 0x400>;
+ #access-controller-cells = <2>;
+ };
+
+ bus_controller: bus@60000 {
+ reg = <0x60000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ #access-controller-cells = <3>;
+
+ uart4: serial@60100 {
+ reg = <0x60100 0x400>;
+ clocks = <&clk_serial>;
+ access-controllers = <&clock_controller 1 2>,
+ <&bus_controller 1 3 5>;
+ access-controller-names = "clock", "bus";
+ };
+ };
diff --git a/dts/upstream/Bindings/arm/altera/socfpga-sdram-controller.txt b/dts/upstream/Bindings/arm/altera/socfpga-sdram-controller.txt
deleted file mode 100644
index 77ca635..0000000
--- a/dts/upstream/Bindings/arm/altera/socfpga-sdram-controller.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Altera SOCFPGA SDRAM Controller
-
-Required properties:
-- compatible : Should contain "altr,sdr-ctl" and "syscon".
- syscon is required by the Altera SOCFPGA SDRAM EDAC.
-- reg : Should contain 1 register range (address and length)
-
-Example:
- sdr: sdr@ffc25000 {
- compatible = "altr,sdr-ctl", "syscon";
- reg = <0xffc25000 0x1000>;
- };
diff --git a/dts/upstream/Bindings/arm/amlogic.yaml b/dts/upstream/Bindings/arm/amlogic.yaml
index 949537c..a374b98 100644
--- a/dts/upstream/Bindings/arm/amlogic.yaml
+++ b/dts/upstream/Bindings/arm/amlogic.yaml
@@ -157,6 +157,7 @@ properties:
items:
- enum:
- bananapi,bpi-cm4io
+ - mntre,reform2-cm4
- const: bananapi,bpi-cm4
- const: amlogic,a311d
- const: amlogic,g12b
@@ -201,6 +202,18 @@ properties:
- amlogic,ad402
- const: amlogic,a1
+ - description: Boards with the Amlogic A4 A113L2 SoC
+ items:
+ - enum:
+ - amlogic,ba400
+ - const: amlogic,a4
+
+ - description: Boards with the Amlogic A5 A113X2 SoC
+ items:
+ - enum:
+ - amlogic,av400
+ - const: amlogic,a5
+
- description: Boards with the Amlogic C3 C302X/C308L SoC
items:
- enum:
diff --git a/dts/upstream/Bindings/arm/apm/scu.txt b/dts/upstream/Bindings/arm/apm/scu.txt
deleted file mode 100644
index b45be06..0000000
--- a/dts/upstream/Bindings/arm/apm/scu.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-APM X-GENE SoC series SCU Registers
-
-This system clock unit contain various register that control block resets,
-clock enable/disables, clock divisors and other deepsleep registers.
-
-Properties:
- - compatible : should contain two values. First value must be:
- - "apm,xgene-scu"
- second value must be always "syscon".
-
- - reg : offset and length of the register set.
-
-Example :
- scu: system-clk-controller@17000000 {
- compatible = "apm,xgene-scu","syscon";
- reg = <0x0 0x17000000 0x0 0x400>;
- };
diff --git a/dts/upstream/Bindings/arm/aspeed/aspeed.yaml b/dts/upstream/Bindings/arm/aspeed/aspeed.yaml
index 749ee54..95113df 100644
--- a/dts/upstream/Bindings/arm/aspeed/aspeed.yaml
+++ b/dts/upstream/Bindings/arm/aspeed/aspeed.yaml
@@ -35,7 +35,10 @@ properties:
- ampere,mtjade-bmc
- aspeed,ast2500-evb
- asrock,e3c246d4i-bmc
+ - asrock,e3c256d4i-bmc
- asrock,romed8hm3-bmc
+ - asrock,spc621d8hm3-bmc
+ - asrock,x570d4u-bmc
- bytedance,g220a-bmc
- facebook,cmm-bmc
- facebook,minipack-bmc
@@ -74,15 +77,18 @@ properties:
- ampere,mtmitchell-bmc
- aspeed,ast2600-evb
- aspeed,ast2600-evb-a1
+ - asus,x4tf-bmc
- facebook,bletchley-bmc
- facebook,cloudripper-bmc
- facebook,elbert-bmc
- facebook,fuji-bmc
- facebook,greatlakes-bmc
+ - facebook,harma-bmc
- facebook,minerva-cmc
- facebook,yosemite4-bmc
- ibm,everest-bmc
- ibm,rainier-bmc
+ - ibm,system1-bmc
- ibm,tacoma-bmc
- inventec,starscream-bmc
- inventec,transformer-bmc
diff --git a/dts/upstream/Bindings/arm/bcm/brcm,bcm4708.yaml b/dts/upstream/Bindings/arm/bcm/brcm,bcm4708.yaml
index 4cc4e67..d925e7a 100644
--- a/dts/upstream/Bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/dts/upstream/Bindings/arm/bcm/brcm,bcm4708.yaml
@@ -53,6 +53,7 @@ properties:
- description: BCM4709 based boards
items:
- enum:
+ - asus,rt-ac3200
- asus,rt-ac87u
- buffalo,wxr-1900dhp
- linksys,ea9200
@@ -67,6 +68,7 @@ properties:
items:
- enum:
- asus,rt-ac3100
+ - asus,rt-ac5300
- asus,rt-ac88u
- dlink,dir-885l
- dlink,dir-890l
diff --git a/dts/upstream/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/dts/upstream/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 39e3c24..1f84407 100644
--- a/dts/upstream/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/dts/upstream/Bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -46,6 +46,30 @@ properties:
- compatible
- "#clock-cells"
+ gpio:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: raspberrypi,firmware-gpio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ The first cell is the pin number, and the second cell is used to
+ specify the gpio polarity (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW).
+
+ gpio-line-names:
+ minItems: 8
+
+ required:
+ - compatible
+ - gpio-controller
+ - "#gpio-cells"
+
reset:
type: object
additionalProperties: false
@@ -96,6 +120,12 @@ examples:
#clock-cells = <1>;
};
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
reset: reset {
compatible = "raspberrypi,firmware-reset";
#reset-cells = <1>;
diff --git a/dts/upstream/Bindings/arm/fsl.yaml b/dts/upstream/Bindings/arm/fsl.yaml
index 0027201..6d185d0 100644
--- a/dts/upstream/Bindings/arm/fsl.yaml
+++ b/dts/upstream/Bindings/arm/fsl.yaml
@@ -813,6 +813,14 @@ properties:
- const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant
- const: fsl,imx6ull
+ - description: Seeed Stuido i.MX6ULL SoM on dev boards
+ items:
+ - enum:
+ - seeed,imx6ull-seeed-npi-emmc
+ - seeed,imx6ull-seeed-npi-nand
+ - const: seeed,imx6ull-seeed-npi
+ - const: fsl,imx6ull
+
- description: i.MX6ULZ based Boards
items:
- enum:
@@ -1050,6 +1058,7 @@ properties:
- enum:
- beacon,imx8mp-beacon-kit # i.MX8MP Beacon Development Kit
- dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC
+ - emcraft,imx8mp-navqp # i.MX8MP Emcraft Systems NavQ+ Kit
- fsl,imx8mp-evk # i.MX8MP EVK Board
- gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board
@@ -1218,7 +1227,6 @@ properties:
- enum:
- einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board
- fsl,imx8qxp-mek # i.MX8QXP MEK Board
- - toradex,colibri-imx8x # Colibri iMX8X Modules
- const: fsl,imx8qxp
- description: i.MX8DXL based Boards
@@ -1227,7 +1235,7 @@ properties:
- fsl,imx8dxl-evk # i.MX8DXL EVK Board
- const: fsl,imx8dxl
- - description: i.MX8QXP Boards with Toradex Colibri iMX8X Modules
+ - description: i.MX8QXP/i.MX8DX Boards with Toradex Colibri iMX8X Modules
items:
- enum:
- toradex,colibri-imx8x-aster # Colibri iMX8X Module on Aster Board
@@ -1235,7 +1243,9 @@ properties:
- toradex,colibri-imx8x-iris # Colibri iMX8X Module on Iris Board
- toradex,colibri-imx8x-iris-v2 # Colibri iMX8X Module on Iris Board V2
- const: toradex,colibri-imx8x
- - const: fsl,imx8qxp
+ - enum:
+ - fsl,imx8qxp
+ - fsl,imx8dx
- description:
TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip
@@ -1536,6 +1546,12 @@ properties:
- nxp,s32g274a-rdb2
- const: nxp,s32g2
+ - description: S32G3 based Boards
+ items:
+ - enum:
+ - nxp,s32g399a-rdb3
+ - const: nxp,s32g3
+
- description: S32V234 based Boards
items:
- enum:
diff --git a/dts/upstream/Bindings/arm/keystone/ti,sci.yaml b/dts/upstream/Bindings/arm/keystone/ti,sci.yaml
index c24ad09..7f06b10 100644
--- a/dts/upstream/Bindings/arm/keystone/ti,sci.yaml
+++ b/dts/upstream/Bindings/arm/keystone/ti,sci.yaml
@@ -61,10 +61,6 @@ properties:
mboxes:
minItems: 2
- ti,system-reboot-controller:
- description: Determines If system reboot can be triggered by SoC reboot
- type: boolean
-
ti,host-id:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
@@ -94,7 +90,6 @@ examples:
- |
pmmc: system-controller@2921800 {
compatible = "ti,k2g-sci";
- ti,system-reboot-controller;
mbox-names = "rx", "tx";
mboxes = <&msgmgr 5 2>,
<&msgmgr 0 0>;
diff --git a/dts/upstream/Bindings/arm/marvell/armada-37xx.txt b/dts/upstream/Bindings/arm/marvell/armada-37xx.txt
deleted file mode 100644
index 29fa93d..0000000
--- a/dts/upstream/Bindings/arm/marvell/armada-37xx.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Power management
-----------------
-
-For power management (particularly DVFS and AVS), the North Bridge
-Power Management component is needed:
-
-Required properties:
-- compatible : should contain "marvell,armada-3700-nb-pm", "syscon";
-- reg : the register start and length for the North Bridge
- Power Management
-
-Example:
-
-nb_pm: syscon@14000 {
- compatible = "marvell,armada-3700-nb-pm", "syscon";
- reg = <0x14000 0x60>;
-}
-
-AVS
----
-
-For AVS an other component is needed:
-
-Required properties:
-- compatible : should contain "marvell,armada-3700-avs", "syscon";
-- reg : the register start and length for the AVS
-
-Example:
-avs: avs@11500 {
- compatible = "marvell,armada-3700-avs", "syscon";
- reg = <0x11500 0x40>;
-}
diff --git a/dts/upstream/Bindings/arm/qcom,coresight-tpda.yaml b/dts/upstream/Bindings/arm/qcom,coresight-tpda.yaml
index ea3c5db..76163abe 100644
--- a/dts/upstream/Bindings/arm/qcom,coresight-tpda.yaml
+++ b/dts/upstream/Bindings/arm/qcom,coresight-tpda.yaml
@@ -66,13 +66,11 @@ properties:
- const: apb_pclk
in-ports:
- type: object
description: |
Input connections from TPDM to TPDA
$ref: /schemas/graph.yaml#/properties/ports
out-ports:
- type: object
description: |
Output connections from the TPDA to legacy CoreSight trace bus.
$ref: /schemas/graph.yaml#/properties/ports
@@ -97,33 +95,31 @@ examples:
# minimum tpda definition.
- |
tpda@6004000 {
- compatible = "qcom,coresight-tpda", "arm,primecell";
- reg = <0x6004000 0x1000>;
+ compatible = "qcom,coresight-tpda", "arm,primecell";
+ reg = <0x6004000 0x1000>;
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
+ clocks = <&aoss_qmp>;
+ clock-names = "apb_pclk";
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
port@0 {
reg = <0>;
tpda_qdss_0_in_tpdm_dcc: endpoint {
- remote-endpoint =
- <&tpdm_dcc_out_tpda_qdss_0>;
- };
+ remote-endpoint = <&tpdm_dcc_out_tpda_qdss_0>;
+ };
};
};
- out-ports {
- port {
- tpda_qdss_out_funnel_in0: endpoint {
- remote-endpoint =
- <&funnel_in0_in_tpda_qdss>;
- };
+ out-ports {
+ port {
+ tpda_qdss_out_funnel_in0: endpoint {
+ remote-endpoint = <&funnel_in0_in_tpda_qdss>;
};
- };
+ };
+ };
};
...
diff --git a/dts/upstream/Bindings/arm/qcom.yaml b/dts/upstream/Bindings/arm/qcom.yaml
index 66beaac..ae88541 100644
--- a/dts/upstream/Bindings/arm/qcom.yaml
+++ b/dts/upstream/Bindings/arm/qcom.yaml
@@ -137,6 +137,7 @@ properties:
- microsoft,dempsey
- microsoft,makepeace
- microsoft,moneypenny
+ - motorola,falcon
- samsung,s3ve3g
- const: qcom,msm8226
@@ -184,13 +185,16 @@ properties:
- oneplus,bacon
- samsung,klte
- sony,xperia-castor
+ - sony,xperia-leo
- const: qcom,msm8974pro
- const: qcom,msm8974
- items:
- - const: qcom,msm8916-mtp
- - const: qcom,msm8916-mtp/1
- - const: qcom,msm8916
+ - enum:
+ - samsung,kltechn
+ - const: samsung,klte
+ - const: qcom,msm8974pro
+ - const: qcom,msm8974
- items:
- enum:
@@ -200,6 +204,8 @@ properties:
- gplus,fl8005a
- huawei,g7
- longcheer,l8910
+ - longcheer,l8150
+ - qcom,msm8916-mtp
- samsung,a3u-eur
- samsung,a5u-eur
- samsung,e5
@@ -221,11 +227,6 @@ properties:
- const: qcom,msm8916
- items:
- - const: longcheer,l8150
- - const: qcom,msm8916-v1-qrd/9-v1
- - const: qcom,msm8916
-
- - items:
- enum:
- motorola,potter
- xiaomi,daisy
@@ -1003,6 +1004,7 @@ properties:
- qcom,sm8550-hdk
- qcom,sm8550-mtp
- qcom,sm8550-qrd
+ - sony,pdx234
- const: qcom,sm8550
- items:
diff --git a/dts/upstream/Bindings/arm/rockchip.yaml b/dts/upstream/Bindings/arm/rockchip.yaml
index fcf7316..e04c213 100644
--- a/dts/upstream/Bindings/arm/rockchip.yaml
+++ b/dts/upstream/Bindings/arm/rockchip.yaml
@@ -49,6 +49,11 @@ properties:
- anbernic,rg-arc-s
- const: rockchip,rk3566
+ - description: ArmSoM Sige7 board
+ items:
+ - const: armsom,sige7
+ - const: rockchip,rk3588
+
- description: Asus Tinker board
items:
- const: asus,rk3288-tinker
@@ -198,6 +203,13 @@ properties:
- const: firefly,rk3568-roc-pc
- const: rockchip,rk3568
+ - description: Forlinx FET3588-C SoM
+ items:
+ - enum:
+ - forlinx,ok3588-c
+ - const: forlinx,fet3588-c
+ - const: rockchip,rk3588
+
- description: FriendlyElec NanoPi R2 series boards
items:
- enum:
@@ -236,6 +248,11 @@ properties:
- const: friendlyarm,nanopc-t6
- const: rockchip,rk3588
+ - description: GameForce Chi
+ items:
+ - const: gameforce,chi
+ - const: rockchip,rk3326
+
- description: GeekBuying GeekBox
items:
- const: geekbuying,geekbox
@@ -631,7 +648,7 @@ properties:
- const: phytec,rk3288-phycore-som
- const: rockchip,rk3288
- - description: Pine64 PinebookPro
+ - description: Pine64 Pinebook Pro
items:
- const: pine64,pinebook-pro
- const: rockchip,rk3399
@@ -644,7 +661,7 @@ properties:
- const: pine64,pinenote
- const: rockchip,rk3566
- - description: Pine64 PinePhonePro
+ - description: Pine64 PinePhone Pro
items:
- const: pine64,pinephone-pro
- const: rockchip,rk3399
@@ -682,7 +699,7 @@ properties:
- const: pine64,quartzpro64
- const: rockchip,rk3588
- - description: Pine64 SoQuartz SoM
+ - description: Pine64 SOQuartz
items:
- enum:
- pine64,soquartz-blade
@@ -700,12 +717,17 @@ properties:
- powkiddy,x55
- const: rockchip,rk3566
+ - description: Protonic MECSBC board
+ items:
+ - const: prt,mecsbc
+ - const: rockchip,rk3568
+
- description: QNAP TS-433-4G 4-Bay NAS
items:
- const: qnap,ts433
- const: rockchip,rk3568
- - description: Radxa Compute Module 3(CM3)
+ - description: Radxa Compute Module 3 (CM3)
items:
- enum:
- radxa,cm3-io
@@ -767,22 +789,27 @@ properties:
- const: radxa,rockpis
- const: rockchip,rk3308
- - description: Radxa Rock2 Square
+ - description: Radxa Rock 2 Square
items:
- const: radxa,rock2-square
- const: rockchip,rk3288
- - description: Radxa ROCK3 Model A
+ - description: Radxa ROCK 3A
items:
- const: radxa,rock3a
- const: rockchip,rk3568
- - description: Radxa ROCK 5 Model A
+ - description: Radxa ROCK 3C
+ items:
+ - const: radxa,rock-3c
+ - const: rockchip,rk3566
+
+ - description: Radxa ROCK 5A
items:
- const: radxa,rock-5a
- const: rockchip,rk3588s
- - description: Radxa ROCK 5 Model B
+ - description: Radxa ROCK 5B
items:
- const: radxa,rock-5b
- const: rockchip,rk3588
@@ -927,6 +954,11 @@ properties:
- const: turing,rk1
- const: rockchip,rk3588
+ - description: WolfVision PF5 mainboard
+ items:
+ - const: wolfvision,rk3568-pf5
+ - const: rockchip,rk3568
+
- description: Xunlong Orange Pi 5 Plus
items:
- const: xunlong,orangepi-5-plus
diff --git a/dts/upstream/Bindings/arm/stm32/st,mlahb.yaml b/dts/upstream/Bindings/arm/stm32/st,mlahb.yaml
index d2dce23..3e99634 100644
--- a/dts/upstream/Bindings/arm/stm32/st,mlahb.yaml
+++ b/dts/upstream/Bindings/arm/stm32/st,mlahb.yaml
@@ -54,11 +54,10 @@ unevaluatedProperties: false
examples:
- |
- mlahb: ahb@38000000 {
+ ahb {
compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x10000000 0x40000>;
ranges;
dma-ranges = <0x00000000 0x38000000 0x10000>,
<0x10000000 0x10000000 0x60000>,
diff --git a/dts/upstream/Bindings/arm/sunxi.yaml b/dts/upstream/Bindings/arm/sunxi.yaml
index 09d835d..c2a158b 100644
--- a/dts/upstream/Bindings/arm/sunxi.yaml
+++ b/dts/upstream/Bindings/arm/sunxi.yaml
@@ -56,6 +56,21 @@ properties:
- const: anbernic,rg-nano
- const: allwinner,sun8i-v3s
+ - description: Anbernic RG35XX (2024)
+ items:
+ - const: anbernic,rg35xx-2024
+ - const: allwinner,sun50i-h700
+
+ - description: Anbernic RG35XX Plus
+ items:
+ - const: anbernic,rg35xx-plus
+ - const: allwinner,sun50i-h700
+
+ - description: Anbernic RG35XX H
+ items:
+ - const: anbernic,rg35xx-h
+ - const: allwinner,sun50i-h700
+
- description: Amarula A64 Relic
items:
- const: amarula,a64-relic
@@ -774,6 +789,11 @@ properties:
- const: pocketbook,touch-lux-3
- const: allwinner,sun5i-a13
+ - description: PocketBook 614 Plus
+ items:
+ - const: pocketbook,614-plus
+ - const: allwinner,sun5i-a13
+
- description: Point of View Protab2-IPS9
items:
- const: pov,protab2-ips9
@@ -860,6 +880,11 @@ properties:
- const: allwinner,sl631
- const: allwinner,sun8i-v3
+ - description: Tanix TX1
+ items:
+ - const: oranth,tanix-tx1
+ - const: allwinner,sun50i-h616
+
- description: Tanix TX6
items:
- const: oranth,tanix-tx6
diff --git a/dts/upstream/Bindings/ata/ahci-da850.txt b/dts/upstream/Bindings/ata/ahci-da850.txt
deleted file mode 100644
index 5f81934..0000000
--- a/dts/upstream/Bindings/ata/ahci-da850.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Device tree binding for the TI DA850 AHCI SATA Controller
----------------------------------------------------------
-
-Required properties:
- - compatible: must be "ti,da850-ahci"
- - reg: physical base addresses and sizes of the two register regions
- used by the controller: the register map as defined by the
- AHCI 1.1 standard and the Power Down Control Register (PWRDN)
- for enabling/disabling the SATA clock receiver
- - interrupts: interrupt specifier (refer to the interrupt binding)
-
-Example:
-
- sata: sata@218000 {
- compatible = "ti,da850-ahci";
- reg = <0x218000 0x2000>, <0x22c018 0x4>;
- interrupts = <67>;
- };
diff --git a/dts/upstream/Bindings/ata/fsl,imx-pata.yaml b/dts/upstream/Bindings/ata/fsl,imx-pata.yaml
new file mode 100644
index 0000000..324e241
--- /dev/null
+++ b/dts/upstream/Bindings/ata/fsl,imx-pata.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,imx-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PATA Controller
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx31-pata
+ - fsl,imx51-pata
+ - const: fsl,imx27-pata
+ - const: fsl,imx27-pata
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: PATA Controller interrupts
+
+ clocks:
+ items:
+ - description: PATA Controller clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ pata: pata@83fe0000 {
+ compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+ reg = <0x83fe0000 0x4000>;
+ interrupts = <70>;
+ clocks = <&clks 161>;
+ };
diff --git a/dts/upstream/Bindings/ata/imx-pata.txt b/dts/upstream/Bindings/ata/imx-pata.txt
deleted file mode 100644
index f1172f0..0000000
--- a/dts/upstream/Bindings/ata/imx-pata.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Freescale i.MX PATA Controller
-
-Required properties:
-- compatible: "fsl,imx27-pata"
-- reg: Address range of the PATA Controller
-- interrupts: The interrupt of the PATA Controller
-- clocks: the clocks for the PATA Controller
-
-Example:
-
- pata: pata@83fe0000 {
- compatible = "fsl,imx51-pata", "fsl,imx27-pata";
- reg = <0x83fe0000 0x4000>;
- interrupts = <70>;
- clocks = <&clks 161>;
- };
diff --git a/dts/upstream/Bindings/ata/ti,da850-ahci.yaml b/dts/upstream/Bindings/ata/ti,da850-ahci.yaml
new file mode 100644
index 0000000..ce13c76
--- /dev/null
+++ b/dts/upstream/Bindings/ata/ti,da850-ahci.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ti,da850-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DA850 AHCI SATA Controller
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+ compatible:
+ const: ti,da850-ahci
+
+ reg:
+ items:
+ - description: Address and size of the register map as defined by the AHCI 1.1 standard.
+ - description:
+ Address and size of Power Down Control Register (PWRDN) for enabling/disabling the SATA clock
+ receiver.
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ sata@218000 {
+ compatible = "ti,da850-ahci";
+ reg = <0x218000 0x2000>, <0x22c018 0x4>;
+ interrupts = <67>;
+ };
diff --git a/dts/upstream/Bindings/bus/st,stm32-etzpc.yaml b/dts/upstream/Bindings/bus/st,stm32-etzpc.yaml
new file mode 100644
index 0000000..d12b62a
--- /dev/null
+++ b/dts/upstream/Bindings/bus/st,stm32-etzpc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32-etzpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Extended TrustZone protection controller
+
+description: |
+ The ETZPC configures TrustZone security in a SoC having bus masters and
+ devices with programmable-security attributes (securable resources).
+
+maintainers:
+ - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32-etzpc
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: st,stm32-etzpc
+ - const: simple-bus
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ "#access-controller-cells":
+ const: 1
+ description:
+ Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ description: Peripherals
+ type: object
+
+ additionalProperties: true
+
+ required:
+ - access-controllers
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - "#access-controller-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ // In this example, the usart2 device refers to rifsc as its access
+ // controller.
+ // Access rights are verified before creating devices.
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp13-clks.h>
+ #include <dt-bindings/reset/stm32mp13-resets.h>
+
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32-etzpc", "simple-bus";
+ reg = <0x5c007000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #access-controller-cells = <1>;
+ ranges;
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 17>;
+ };
+ };
diff --git a/dts/upstream/Bindings/bus/st,stm32mp25-rifsc.yaml b/dts/upstream/Bindings/bus/st,stm32mp25-rifsc.yaml
new file mode 100644
index 0000000..20acd1a
--- /dev/null
+++ b/dts/upstream/Bindings/bus/st,stm32mp25-rifsc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Resource isolation framework security controller
+
+maintainers:
+ - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+description: |
+ Resource isolation framework (RIF) is a comprehensive set of hardware blocks
+ designed to enforce and manage isolation of STM32 hardware resources like
+ memory and peripherals.
+
+ The RIFSC (RIF security controller) is composed of three sets of registers,
+ each managing a specific set of hardware resources:
+ - RISC registers associated with RISUP logic (resource isolation device unit
+ for peripherals), assign all non-RIF aware peripherals to zero, one or
+ any security domains (secure, privilege, compartment).
+ - RIMC registers: associated with RIMU logic (resource isolation master
+ unit), assign all non RIF-aware bus master to one security domain by
+ setting secure, privileged and compartment information on the system bus.
+ Alternatively, the RISUP logic controlling the device port access to a
+ peripheral can assign target bus attributes to this peripheral master port
+ (supported attribute: CID).
+ - RISC registers associated with RISAL logic (resource isolation device unit
+ for address space - Lite version), assign address space subregions to one
+ security domains (secure, privilege, compartment).
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp25-rifsc
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: st,stm32mp25-rifsc
+ - const: simple-bus
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ "#access-controller-cells":
+ const: 1
+ description:
+ Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ description: Peripherals
+ type: object
+
+ additionalProperties: true
+
+ required:
+ - access-controllers
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - "#access-controller-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ // In this example, the usart2 device refers to rifsc as its domain
+ // controller.
+ // Access rights are verified before creating devices.
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ rifsc: bus@42080000 {
+ compatible = "st,stm32mp25-rifsc", "simple-bus";
+ reg = <0x42080000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #access-controller-cells = <1>;
+ ranges;
+
+ usart2: serial@400e0000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x400e0000 0x400>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ck_flexgen_08>;
+ access-controllers = <&rifsc 32>;
+ };
+ };
diff --git a/dts/upstream/Bindings/cache/qcom,llcc.yaml b/dts/upstream/Bindings/cache/qcom,llcc.yaml
index 07ccbda..b9a9f2c 100644
--- a/dts/upstream/Bindings/cache/qcom,llcc.yaml
+++ b/dts/upstream/Bindings/cache/qcom,llcc.yaml
@@ -66,7 +66,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,qdu1000-llcc
- qcom,sc7180-llcc
- qcom,sm6350-llcc
then:
@@ -104,6 +103,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,qdu1000-llcc
- qcom,sc8180x-llcc
- qcom,sc8280xp-llcc
- qcom,x1e80100-llcc
diff --git a/dts/upstream/Bindings/clock/airoha,en7523-scu.yaml b/dts/upstream/Bindings/clock/airoha,en7523-scu.yaml
index 79b0752..3f42666 100644
--- a/dts/upstream/Bindings/clock/airoha,en7523-scu.yaml
+++ b/dts/upstream/Bindings/clock/airoha,en7523-scu.yaml
@@ -29,10 +29,13 @@ description: |
properties:
compatible:
items:
- - const: airoha,en7523-scu
+ - enum:
+ - airoha,en7523-scu
+ - airoha,en7581-scu
reg:
- maxItems: 2
+ minItems: 2
+ maxItems: 3
"#clock-cells":
description:
@@ -45,6 +48,30 @@ required:
- reg
- '#clock-cells'
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: airoha,en7523-scu
+ then:
+ properties:
+ reg:
+ items:
+ - description: scu base address
+ - description: misc scu base address
+
+ - if:
+ properties:
+ compatible:
+ const: airoha,en7581-scu
+ then:
+ properties:
+ reg:
+ items:
+ - description: scu base address
+ - description: misc scu base address
+ - description: pb scu base address
+
additionalProperties: false
examples:
diff --git a/dts/upstream/Bindings/clock/fixed-clock.yaml b/dts/upstream/Bindings/clock/fixed-clock.yaml
index b0a4fb8..90fb106 100644
--- a/dts/upstream/Bindings/clock/fixed-clock.yaml
+++ b/dts/upstream/Bindings/clock/fixed-clock.yaml
@@ -11,6 +11,15 @@ maintainers:
- Stephen Boyd <sboyd@kernel.org>
properties:
+ $nodename:
+ anyOf:
+ - description:
+ Preferred name is 'clock-<freq>' with <freq> being the output
+ frequency as defined in the 'clock-frequency' property.
+ pattern: "^clock-([0-9]+|[a-z0-9-]+)$"
+ - description: Any name allowed
+ deprecated: true
+
compatible:
const: fixed-clock
diff --git a/dts/upstream/Bindings/clock/fixed-factor-clock.yaml b/dts/upstream/Bindings/clock/fixed-factor-clock.yaml
index 8f71ab3..4afdb1c 100644
--- a/dts/upstream/Bindings/clock/fixed-factor-clock.yaml
+++ b/dts/upstream/Bindings/clock/fixed-factor-clock.yaml
@@ -11,6 +11,15 @@ maintainers:
- Stephen Boyd <sboyd@kernel.org>
properties:
+ $nodename:
+ anyOf:
+ - description:
+ If the frequency is fixed, the preferred name is 'clock-<freq>' with
+ <freq> being the output frequency.
+ pattern: "^clock-([0-9]+|[0-9a-z-]+)$"
+ - description: Any name allowed
+ deprecated: true
+
compatible:
enum:
- fixed-factor-clock
diff --git a/dts/upstream/Bindings/clock/google,gs101-clock.yaml b/dts/upstream/Bindings/clock/google,gs101-clock.yaml
index 1d2bcea..caf442e 100644
--- a/dts/upstream/Bindings/clock/google,gs101-clock.yaml
+++ b/dts/upstream/Bindings/clock/google,gs101-clock.yaml
@@ -30,16 +30,18 @@ properties:
- google,gs101-cmu-top
- google,gs101-cmu-apm
- google,gs101-cmu-misc
+ - google,gs101-cmu-hsi0
+ - google,gs101-cmu-hsi2
- google,gs101-cmu-peric0
- google,gs101-cmu-peric1
clocks:
minItems: 1
- maxItems: 3
+ maxItems: 5
clock-names:
minItems: 1
- maxItems: 3
+ maxItems: 5
"#clock-cells":
const: 1
@@ -76,6 +78,55 @@ allOf:
properties:
compatible:
contains:
+ const: google,gs101-cmu-hsi0
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (24.576 MHz)
+ - description: HSI0 bus clock (from CMU_TOP)
+ - description: DPGTC (from CMU_TOP)
+ - description: USB DRD controller clock (from CMU_TOP)
+ - description: USB Display Port debug clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: bus
+ - const: dpgtc
+ - const: usb31drd
+ - const: usbdpdbg
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - google,gs101-cmu-hsi2
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (24.576 MHz)
+ - description: High Speed Interface bus clock (from CMU_TOP)
+ - description: High Speed Interface pcie clock (from CMU_TOP)
+ - description: High Speed Interface ufs clock (from CMU_TOP)
+ - description: High Speed Interface mmc clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: bus
+ - const: pcie
+ - const: ufs
+ - const: mmc
+
+ - if:
+ properties:
+ compatible:
+ contains:
const: google,gs101-cmu-misc
then:
diff --git a/dts/upstream/Bindings/clock/loongson,ls2k-clk.yaml b/dts/upstream/Bindings/clock/loongson,ls2k-clk.yaml
index 63a5901..4f79cdb 100644
--- a/dts/upstream/Bindings/clock/loongson,ls2k-clk.yaml
+++ b/dts/upstream/Bindings/clock/loongson,ls2k-clk.yaml
@@ -16,7 +16,9 @@ description: |
properties:
compatible:
enum:
- - loongson,ls2k-clk
+ - loongson,ls2k0500-clk
+ - loongson,ls2k-clk # This is for Loongson-2K1000
+ - loongson,ls2k2000-clk
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/clock/nxp,imx95-blk-ctl.yaml b/dts/upstream/Bindings/clock/nxp,imx95-blk-ctl.yaml
new file mode 100644
index 0000000..2dffc02
--- /dev/null
+++ b/dts/upstream/Bindings/clock/nxp,imx95-blk-ctl.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,imx95-blk-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX95 Block Control
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - nxp,imx95-lvds-csr
+ - nxp,imx95-display-csr
+ - nxp,imx95-camera-csr
+ - nxp,imx95-vpu-csr
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+ description:
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See
+ include/dt-bindings/clock/nxp,imx95-clock.h
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@4c410000 {
+ compatible = "nxp,imx95-vpu-csr", "syscon";
+ reg = <0x4c410000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&scmi_clk 114>;
+ power-domains = <&scmi_devpd 21>;
+ };
+...
diff --git a/dts/upstream/Bindings/clock/nxp,imx95-display-master-csr.yaml b/dts/upstream/Bindings/clock/nxp,imx95-display-master-csr.yaml
new file mode 100644
index 0000000..07f7412
--- /dev/null
+++ b/dts/upstream/Bindings/clock/nxp,imx95-display-master-csr.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,imx95-display-master-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX95 Display Master Block Control
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+properties:
+ compatible:
+ items:
+ - const: nxp,imx95-display-master-csr
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+ description:
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See
+ include/dt-bindings/clock/nxp,imx95-clock.h
+
+ mux-controller:
+ type: object
+ $ref: /schemas/mux/reg-mux.yaml
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - mux-controller
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@4c410000 {
+ compatible = "nxp,imx95-display-master-csr", "syscon";
+ reg = <0x4c410000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&scmi_clk 62>;
+ power-domains = <&scmi_devpd 3>;
+
+ mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4 0x00000001>; /* Pixel_link_sel */
+ idle-states = <0>;
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/clock/qcom,hfpll.txt b/dts/upstream/Bindings/clock/qcom,hfpll.txt
deleted file mode 100644
index 5769cbb..0000000
--- a/dts/upstream/Bindings/clock/qcom,hfpll.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-High-Frequency PLL (HFPLL)
-
-PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>:
- shall contain only one of the following. The generic
- compatible "qcom,hfpll" should be also included.
-
- "qcom,hfpll-ipq8064", "qcom,hfpll"
- "qcom,hfpll-apq8064", "qcom,hfpll"
- "qcom,hfpll-msm8974", "qcom,hfpll"
- "qcom,hfpll-msm8960", "qcom,hfpll"
- "qcom,msm8976-hfpll-a53", "qcom,hfpll"
- "qcom,msm8976-hfpll-a72", "qcom,hfpll"
- "qcom,msm8976-hfpll-cci", "qcom,hfpll"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: address and size of HPLL registers. An optional second
- element specifies the address and size of the alias
- register region.
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to the xo clock.
-
-- clock-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "xo".
-
-- clock-output-names:
- Usage: required
- Value type: <string>
- Definition: Name of the PLL. Typically hfpllX where X is a CPU number
- starting at 0. Otherwise hfpll_Y where Y is more specific
- such as "l2".
-
-Example:
-
-1) An HFPLL for the L2 cache.
-
- clock-controller@f9016000 {
- compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
- reg = <0xf9016000 0x30>;
- clocks = <&xo_board>;
- clock-names = "xo";
- clock-output-names = "hfpll_l2";
- };
-
-2) An HFPLL for CPU0. This HFPLL has the alias register region.
-
- clock-controller@f908a000 {
- compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
- reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
- clocks = <&xo_board>;
- clock-names = "xo";
- clock-output-names = "hfpll0";
- };
diff --git a/dts/upstream/Bindings/clock/qcom,hfpll.yaml b/dts/upstream/Bindings/clock/qcom,hfpll.yaml
new file mode 100644
index 0000000..8cb1c16
--- /dev/null
+++ b/dts/upstream/Bindings/clock/qcom,hfpll.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,hfpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm High-Frequency PLL
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ The HFPLL is used as CPU PLL on various Qualcomm SoCs.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - qcom,msm8974-hfpll
+ - qcom,msm8976-hfpll-a53
+ - qcom,msm8976-hfpll-a72
+ - qcom,msm8976-hfpll-cci
+ - qcom,qcs404-hfpll
+ - const: qcom,hfpll
+ deprecated: true
+
+ reg:
+ items:
+ - description: HFPLL registers
+ - description: Alias register region
+ minItems: 1
+
+ '#clock-cells':
+ const: 0
+
+ clocks:
+ items:
+ - description: board XO clock
+
+ clock-names:
+ items:
+ - const: xo
+
+ clock-output-names:
+ description:
+ Name of the PLL. Typically hfpllX where X is a CPU number starting at 0.
+ Otherwise hfpll_Y where Y is more specific such as "l2".
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+ - clock-names
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@f908a000 {
+ compatible = "qcom,msm8974-hfpll";
+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+ #clock-cells = <0>;
+ clock-output-names = "hfpll0";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
diff --git a/dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml b/dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml
index 80a8c71..4e3b0c4 100644
--- a/dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml
@@ -57,7 +57,8 @@ properties:
can be power-managed through Module Standby should refer to the CPG device
node in their "power-domains" property, as documented by the generic PM
Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
- const: 0
+ The power domain specifiers defined in <dt-bindings/clock/r9a0*-cpg.h> could
+ be used to reference individual CPG power domains.
'#reset-cells':
description:
@@ -76,6 +77,21 @@ required:
additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a08g045-cpg
+ then:
+ properties:
+ '#power-domain-cells':
+ const: 1
+ else:
+ properties:
+ '#power-domain-cells':
+ const: 0
+
examples:
- |
cpg: clock-controller@11010000 {
diff --git a/dts/upstream/Bindings/clock/samsung,s3c6400-clock.yaml b/dts/upstream/Bindings/clock/samsung,s3c6400-clock.yaml
new file mode 100644
index 0000000..0fcc0c9
--- /dev/null
+++ b/dts/upstream/Bindings/clock/samsung,s3c6400-clock.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s3c6400-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C6400 SoC clock controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ There are several clocks that are generated outside the SoC. It is expected
+ that they are defined using standard clock bindings with following
+ clock-output-names and/or provided as clock inputs to this clock controller:
+ - "fin_pll" - PLL input clock (xtal/extclk) - required,
+ - "xusbxti" - USB xtal - required,
+ - "iiscdclk0" - I2S0 codec clock - optional,
+ - "iiscdclk1" - I2S1 codec clock - optional,
+ - "iiscdclk2" - I2S2 codec clock - optional,
+ - "pcmcdclk0" - PCM0 codec clock - optional,
+ - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
+
+ All available clocks are defined as preprocessor macros in
+ include/dt-bindings/clock/samsung,s3c64xx-clock.h header.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s3c6400-clock
+ - samsung,s3c6410-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@7e00f000 {
+ compatible = "samsung,s3c6410-clock";
+ reg = <0x7e00f000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>;
+ };
diff --git a/dts/upstream/Bindings/clock/samsung,s3c64xx-clock.txt b/dts/upstream/Bindings/clock/samsung,s3c64xx-clock.txt
deleted file mode 100644
index 872ee8e..0000000
--- a/dts/upstream/Bindings/clock/samsung,s3c64xx-clock.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Samsung S3C64xx Clock Controller
-
-The S3C64xx clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to all SoCs in
-the S3C64xx family.
-
-Required Properties:
-
-- compatible: should be one of the following.
- - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
- - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular S3C64xx SoC and this is specified where applicable.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
-tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "fin_pll" - PLL input clock (xtal/extclk) - required,
- - "xusbxti" - USB xtal - required,
- - "iiscdclk0" - I2S0 codec clock - optional,
- - "iiscdclk1" - I2S1 codec clock - optional,
- - "iiscdclk2" - I2S2 codec clock - optional,
- - "pcmcdclk0" - PCM0 codec clock - optional,
- - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
-
-Example: Clock controller node:
-
- clock: clock-controller@7e00f000 {
- compatible = "samsung,s3c6410-clock";
- reg = <0x7e00f000 0x1000>;
- #clock-cells = <1>;
- };
-
-Example: Required external clocks:
-
- fin_pll: clock-fin-pll {
- compatible = "fixed-clock";
- clock-output-names = "fin_pll";
- clock-frequency = <12000000>;
- #clock-cells = <0>;
- };
-
- xusbxti: clock-xusbxti {
- compatible = "fixed-clock";
- clock-output-names = "xusbxti";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
-
-Example: UART controller node that consumes the clock generated by the clock
- controller (refer to the standard clock bindings for information about
- "clocks" and "clock-names" properties):
-
- uart0: serial@7f005000 {
- compatible = "samsung,s3c6400-uart";
- reg = <0x7f005000 0x100>;
- interrupt-parent = <&vic1>;
- interrupts = <5>;
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
- <&clock SCLK_UART>;
- };
diff --git a/dts/upstream/Bindings/clock/sophgo,cv1800-clk.yaml b/dts/upstream/Bindings/clock/sophgo,cv1800-clk.yaml
index c1dc246..59ef41a 100644
--- a/dts/upstream/Bindings/clock/sophgo,cv1800-clk.yaml
+++ b/dts/upstream/Bindings/clock/sophgo,cv1800-clk.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/clock/sophgo,cv1800-clk.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Sophgo CV1800 Series Clock Controller
+title: Sophgo CV1800/SG2000 Series Clock Controller
maintainers:
- Inochi Amaoto <inochiama@outlook.com>
@@ -14,6 +14,7 @@ properties:
enum:
- sophgo,cv1800-clk
- sophgo,cv1810-clk
+ - sophgo,sg2000-clk
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/clock/st,stm32mp25-rcc.yaml b/dts/upstream/Bindings/clock/st,stm32mp25-rcc.yaml
index 7732e79..88e52f1 100644
--- a/dts/upstream/Bindings/clock/st,stm32mp25-rcc.yaml
+++ b/dts/upstream/Bindings/clock/st,stm32mp25-rcc.yaml
@@ -38,14 +38,85 @@ properties:
- description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz)
- description: CK_SCMI_LSE Low Speed External oscillator (32 KHz)
- description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz)
+ - description: CK_SCMI_HSE_DIV2 CK_SCMI_HSE divided by 2 (coud be gated)
+ - description: CK_SCMI_ICN_HS_MCU High Speed interconnect bus clock
+ - description: CK_SCMI_ICN_LS_MCU Low Speed interconnect bus clock
+ - description: CK_SCMI_ICN_SDMMC SDMMC interconnect bus clock
+ - description: CK_SCMI_ICN_DDR DDR interconnect bus clock
+ - description: CK_SCMI_ICN_DISPLAY Display interconnect bus clock
+ - description: CK_SCMI_ICN_HSL HSL interconnect bus clock
+ - description: CK_SCMI_ICN_NIC NIC interconnect bus clock
+ - description: CK_SCMI_ICN_VID Video interconnect bus clock
+ - description: CK_SCMI_FLEXGEN_07 flexgen clock 7
+ - description: CK_SCMI_FLEXGEN_08 flexgen clock 8
+ - description: CK_SCMI_FLEXGEN_09 flexgen clock 9
+ - description: CK_SCMI_FLEXGEN_10 flexgen clock 10
+ - description: CK_SCMI_FLEXGEN_11 flexgen clock 11
+ - description: CK_SCMI_FLEXGEN_12 flexgen clock 12
+ - description: CK_SCMI_FLEXGEN_13 flexgen clock 13
+ - description: CK_SCMI_FLEXGEN_14 flexgen clock 14
+ - description: CK_SCMI_FLEXGEN_15 flexgen clock 15
+ - description: CK_SCMI_FLEXGEN_16 flexgen clock 16
+ - description: CK_SCMI_FLEXGEN_17 flexgen clock 17
+ - description: CK_SCMI_FLEXGEN_18 flexgen clock 18
+ - description: CK_SCMI_FLEXGEN_19 flexgen clock 19
+ - description: CK_SCMI_FLEXGEN_20 flexgen clock 20
+ - description: CK_SCMI_FLEXGEN_21 flexgen clock 21
+ - description: CK_SCMI_FLEXGEN_22 flexgen clock 22
+ - description: CK_SCMI_FLEXGEN_23 flexgen clock 23
+ - description: CK_SCMI_FLEXGEN_24 flexgen clock 24
+ - description: CK_SCMI_FLEXGEN_25 flexgen clock 25
+ - description: CK_SCMI_FLEXGEN_26 flexgen clock 26
+ - description: CK_SCMI_FLEXGEN_27 flexgen clock 27
+ - description: CK_SCMI_FLEXGEN_28 flexgen clock 28
+ - description: CK_SCMI_FLEXGEN_29 flexgen clock 29
+ - description: CK_SCMI_FLEXGEN_30 flexgen clock 30
+ - description: CK_SCMI_FLEXGEN_31 flexgen clock 31
+ - description: CK_SCMI_FLEXGEN_32 flexgen clock 32
+ - description: CK_SCMI_FLEXGEN_33 flexgen clock 33
+ - description: CK_SCMI_FLEXGEN_34 flexgen clock 34
+ - description: CK_SCMI_FLEXGEN_35 flexgen clock 35
+ - description: CK_SCMI_FLEXGEN_36 flexgen clock 36
+ - description: CK_SCMI_FLEXGEN_37 flexgen clock 37
+ - description: CK_SCMI_FLEXGEN_38 flexgen clock 38
+ - description: CK_SCMI_FLEXGEN_39 flexgen clock 39
+ - description: CK_SCMI_FLEXGEN_40 flexgen clock 40
+ - description: CK_SCMI_FLEXGEN_41 flexgen clock 41
+ - description: CK_SCMI_FLEXGEN_42 flexgen clock 42
+ - description: CK_SCMI_FLEXGEN_43 flexgen clock 43
+ - description: CK_SCMI_FLEXGEN_44 flexgen clock 44
+ - description: CK_SCMI_FLEXGEN_45 flexgen clock 45
+ - description: CK_SCMI_FLEXGEN_46 flexgen clock 46
+ - description: CK_SCMI_FLEXGEN_47 flexgen clock 47
+ - description: CK_SCMI_FLEXGEN_48 flexgen clock 48
+ - description: CK_SCMI_FLEXGEN_49 flexgen clock 49
+ - description: CK_SCMI_FLEXGEN_50 flexgen clock 50
+ - description: CK_SCMI_FLEXGEN_51 flexgen clock 51
+ - description: CK_SCMI_FLEXGEN_52 flexgen clock 52
+ - description: CK_SCMI_FLEXGEN_53 flexgen clock 53
+ - description: CK_SCMI_FLEXGEN_54 flexgen clock 54
+ - description: CK_SCMI_FLEXGEN_55 flexgen clock 55
+ - description: CK_SCMI_FLEXGEN_56 flexgen clock 56
+ - description: CK_SCMI_FLEXGEN_57 flexgen clock 57
+ - description: CK_SCMI_FLEXGEN_58 flexgen clock 58
+ - description: CK_SCMI_FLEXGEN_59 flexgen clock 59
+ - description: CK_SCMI_FLEXGEN_60 flexgen clock 60
+ - description: CK_SCMI_FLEXGEN_61 flexgen clock 61
+ - description: CK_SCMI_FLEXGEN_62 flexgen clock 62
+ - description: CK_SCMI_FLEXGEN_63 flexgen clock 63
+ - description: CK_SCMI_ICN_APB1 Peripheral bridge 1
+ - description: CK_SCMI_ICN_APB2 Peripheral bridge 2
+ - description: CK_SCMI_ICN_APB3 Peripheral bridge 3
+ - description: CK_SCMI_ICN_APB4 Peripheral bridge 4
+ - description: CK_SCMI_ICN_APBDBG Peripheral bridge for degub
+ - description: CK_SCMI_TIMG1 Peripheral bridge for timer1
+ - description: CK_SCMI_TIMG2 Peripheral bridge for timer2
+ - description: CK_SCMI_PLL3 PLL3 clock
+ - description: clk_dsi_txbyte DSI byte clock
- clock-names:
- items:
- - const: hse
- - const: hsi
- - const: msi
- - const: lse
- - const: lsi
+ access-controllers:
+ minItems: 1
+ maxItems: 2
required:
- compatible
@@ -53,7 +124,6 @@ required:
- '#clock-cells'
- '#reset-cells'
- clocks
- - clock-names
additionalProperties: false
@@ -66,11 +136,85 @@ examples:
reg = <0x44200000 0x10000>;
#clock-cells = <1>;
#reset-cells = <1>;
- clock-names = "hse", "hsi", "msi", "lse", "lsi";
- clocks = <&scmi_clk CK_SCMI_HSE>,
- <&scmi_clk CK_SCMI_HSI>,
- <&scmi_clk CK_SCMI_MSI>,
- <&scmi_clk CK_SCMI_LSE>,
- <&scmi_clk CK_SCMI_LSI>;
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_MSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>,
+ <&scmi_clk CK_SCMI_HSE_DIV2>,
+ <&scmi_clk CK_SCMI_ICN_HS_MCU>,
+ <&scmi_clk CK_SCMI_ICN_LS_MCU>,
+ <&scmi_clk CK_SCMI_ICN_SDMMC>,
+ <&scmi_clk CK_SCMI_ICN_DDR>,
+ <&scmi_clk CK_SCMI_ICN_DISPLAY>,
+ <&scmi_clk CK_SCMI_ICN_HSL>,
+ <&scmi_clk CK_SCMI_ICN_NIC>,
+ <&scmi_clk CK_SCMI_ICN_VID>,
+ <&scmi_clk CK_SCMI_FLEXGEN_07>,
+ <&scmi_clk CK_SCMI_FLEXGEN_08>,
+ <&scmi_clk CK_SCMI_FLEXGEN_09>,
+ <&scmi_clk CK_SCMI_FLEXGEN_10>,
+ <&scmi_clk CK_SCMI_FLEXGEN_11>,
+ <&scmi_clk CK_SCMI_FLEXGEN_12>,
+ <&scmi_clk CK_SCMI_FLEXGEN_13>,
+ <&scmi_clk CK_SCMI_FLEXGEN_14>,
+ <&scmi_clk CK_SCMI_FLEXGEN_15>,
+ <&scmi_clk CK_SCMI_FLEXGEN_16>,
+ <&scmi_clk CK_SCMI_FLEXGEN_17>,
+ <&scmi_clk CK_SCMI_FLEXGEN_18>,
+ <&scmi_clk CK_SCMI_FLEXGEN_19>,
+ <&scmi_clk CK_SCMI_FLEXGEN_20>,
+ <&scmi_clk CK_SCMI_FLEXGEN_21>,
+ <&scmi_clk CK_SCMI_FLEXGEN_22>,
+ <&scmi_clk CK_SCMI_FLEXGEN_23>,
+ <&scmi_clk CK_SCMI_FLEXGEN_24>,
+ <&scmi_clk CK_SCMI_FLEXGEN_25>,
+ <&scmi_clk CK_SCMI_FLEXGEN_26>,
+ <&scmi_clk CK_SCMI_FLEXGEN_27>,
+ <&scmi_clk CK_SCMI_FLEXGEN_28>,
+ <&scmi_clk CK_SCMI_FLEXGEN_29>,
+ <&scmi_clk CK_SCMI_FLEXGEN_30>,
+ <&scmi_clk CK_SCMI_FLEXGEN_31>,
+ <&scmi_clk CK_SCMI_FLEXGEN_32>,
+ <&scmi_clk CK_SCMI_FLEXGEN_33>,
+ <&scmi_clk CK_SCMI_FLEXGEN_34>,
+ <&scmi_clk CK_SCMI_FLEXGEN_35>,
+ <&scmi_clk CK_SCMI_FLEXGEN_36>,
+ <&scmi_clk CK_SCMI_FLEXGEN_37>,
+ <&scmi_clk CK_SCMI_FLEXGEN_38>,
+ <&scmi_clk CK_SCMI_FLEXGEN_39>,
+ <&scmi_clk CK_SCMI_FLEXGEN_40>,
+ <&scmi_clk CK_SCMI_FLEXGEN_41>,
+ <&scmi_clk CK_SCMI_FLEXGEN_42>,
+ <&scmi_clk CK_SCMI_FLEXGEN_43>,
+ <&scmi_clk CK_SCMI_FLEXGEN_44>,
+ <&scmi_clk CK_SCMI_FLEXGEN_45>,
+ <&scmi_clk CK_SCMI_FLEXGEN_46>,
+ <&scmi_clk CK_SCMI_FLEXGEN_47>,
+ <&scmi_clk CK_SCMI_FLEXGEN_48>,
+ <&scmi_clk CK_SCMI_FLEXGEN_49>,
+ <&scmi_clk CK_SCMI_FLEXGEN_50>,
+ <&scmi_clk CK_SCMI_FLEXGEN_51>,
+ <&scmi_clk CK_SCMI_FLEXGEN_52>,
+ <&scmi_clk CK_SCMI_FLEXGEN_53>,
+ <&scmi_clk CK_SCMI_FLEXGEN_54>,
+ <&scmi_clk CK_SCMI_FLEXGEN_55>,
+ <&scmi_clk CK_SCMI_FLEXGEN_56>,
+ <&scmi_clk CK_SCMI_FLEXGEN_57>,
+ <&scmi_clk CK_SCMI_FLEXGEN_58>,
+ <&scmi_clk CK_SCMI_FLEXGEN_59>,
+ <&scmi_clk CK_SCMI_FLEXGEN_60>,
+ <&scmi_clk CK_SCMI_FLEXGEN_61>,
+ <&scmi_clk CK_SCMI_FLEXGEN_62>,
+ <&scmi_clk CK_SCMI_FLEXGEN_63>,
+ <&scmi_clk CK_SCMI_ICN_APB1>,
+ <&scmi_clk CK_SCMI_ICN_APB2>,
+ <&scmi_clk CK_SCMI_ICN_APB3>,
+ <&scmi_clk CK_SCMI_ICN_APB4>,
+ <&scmi_clk CK_SCMI_ICN_APBDBG>,
+ <&scmi_clk CK_SCMI_TIMG1>,
+ <&scmi_clk CK_SCMI_TIMG2>,
+ <&scmi_clk CK_SCMI_PLL3>,
+ <&clk_dsi_txbyte>;
};
...
diff --git a/dts/upstream/Bindings/cpufreq/cpufreq-qcom-hw.yaml b/dts/upstream/Bindings/cpufreq/cpufreq-qcom-hw.yaml
index 56fc71d..1e9797f 100644
--- a/dts/upstream/Bindings/cpufreq/cpufreq-qcom-hw.yaml
+++ b/dts/upstream/Bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -38,6 +38,7 @@ properties:
- qcom,sc7280-cpufreq-epss
- qcom,sc8280xp-cpufreq-epss
- qcom,sdx75-cpufreq-epss
+ - qcom,sm4450-cpufreq-epss
- qcom,sm6375-cpufreq-epss
- qcom,sm8250-cpufreq-epss
- qcom,sm8350-cpufreq-epss
@@ -133,6 +134,7 @@ allOf:
- qcom,sc8280xp-cpufreq-epss
- qcom,sdm670-cpufreq-hw
- qcom,sdm845-cpufreq-hw
+ - qcom,sm4450-cpufreq-epss
- qcom,sm6115-cpufreq-hw
- qcom,sm6350-cpufreq-hw
- qcom,sm6375-cpufreq-epss
diff --git a/dts/upstream/Bindings/crypto/nvidia,tegra234-se-aes.yaml b/dts/upstream/Bindings/crypto/nvidia,tegra234-se-aes.yaml
new file mode 100644
index 0000000..cb47ae2
--- /dev/null
+++ b/dts/upstream/Bindings/crypto/nvidia,tegra234-se-aes.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Security Engine for AES algorithms
+
+description:
+ The Tegra Security Engine accelerates the following AES encryption/decryption
+ algorithms - AES-ECB, AES-CBC, AES-OFB, AES-XTS, AES-CTR, AES-GCM, AES-CCM,
+ AES-CMAC
+
+maintainers:
+ - Akhil R <akhilrajeev@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra234-se-aes
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/memory/tegra234-mc.h>
+ #include <dt-bindings/clock/tegra234-clock.h>
+
+ crypto@15820000 {
+ compatible = "nvidia,tegra234-se-aes";
+ reg = <0x15820000 0x10000>;
+ clocks = <&bpmp TEGRA234_CLK_SE>;
+ iommus = <&smmu TEGRA234_SID_SES_SE1>;
+ dma-coherent;
+ };
+...
diff --git a/dts/upstream/Bindings/crypto/nvidia,tegra234-se-hash.yaml b/dts/upstream/Bindings/crypto/nvidia,tegra234-se-hash.yaml
new file mode 100644
index 0000000..f57ef10
--- /dev/null
+++ b/dts/upstream/Bindings/crypto/nvidia,tegra234-se-hash.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-hash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Security Engine for HASH algorithms
+
+description:
+ The Tegra Security HASH Engine accelerates the following HASH functions -
+ SHA1, SHA224, SHA256, SHA384, SHA512, SHA3-224, SHA3-256, SHA3-384, SHA3-512
+ HMAC(SHA224), HMAC(SHA256), HMAC(SHA384), HMAC(SHA512)
+
+maintainers:
+ - Akhil R <akhilrajeev@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra234-se-hash
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/memory/tegra234-mc.h>
+ #include <dt-bindings/clock/tegra234-clock.h>
+
+ crypto@15840000 {
+ compatible = "nvidia,tegra234-se-hash";
+ reg = <0x15840000 0x10000>;
+ clocks = <&bpmp TEGRA234_CLK_SE>;
+ iommus = <&smmu TEGRA234_SID_SES_SE2>;
+ dma-coherent;
+ };
+...
diff --git a/dts/upstream/Bindings/crypto/omap-sham.txt b/dts/upstream/Bindings/crypto/omap-sham.txt
deleted file mode 100644
index ad91155..0000000
--- a/dts/upstream/Bindings/crypto/omap-sham.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-OMAP SoC SHA crypto Module
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
- SHAM versions:
- - "ti,omap2-sham" for OMAP2 & OMAP3.
- - "ti,omap4-sham" for OMAP4 and AM33XX.
- - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
-- ti,hwmods: Name of the hwmod associated with the SHAM module
-- reg : Offset and length of the register set for the module
-- interrupts : the interrupt-specifier for the SHAM module.
-
-Optional properties:
-- dmas: DMA specifiers for the rx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request name. Should be "rx" if a dma is present.
-
-Example:
- /* AM335x */
- sham: sham@53100000 {
- compatible = "ti,omap4-sham";
- ti,hwmods = "sham";
- reg = <0x53100000 0x200>;
- interrupts = <109>;
- dmas = <&edma 36>;
- dma-names = "rx";
- };
diff --git a/dts/upstream/Bindings/crypto/qcom,inline-crypto-engine.yaml b/dts/upstream/Bindings/crypto/qcom,inline-crypto-engine.yaml
index e91bc7d..0304f07 100644
--- a/dts/upstream/Bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/dts/upstream/Bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -15,6 +15,7 @@ properties:
- enum:
- qcom,sa8775p-inline-crypto-engine
- qcom,sc7180-inline-crypto-engine
+ - qcom,sc7280-inline-crypto-engine
- qcom,sm8450-inline-crypto-engine
- qcom,sm8550-inline-crypto-engine
- qcom,sm8650-inline-crypto-engine
diff --git a/dts/upstream/Bindings/crypto/st,stm32-cryp.yaml b/dts/upstream/Bindings/crypto/st,stm32-cryp.yaml
index 0ddeb8a..2735465 100644
--- a/dts/upstream/Bindings/crypto/st,stm32-cryp.yaml
+++ b/dts/upstream/Bindings/crypto/st,stm32-cryp.yaml
@@ -46,6 +46,10 @@ properties:
power-domains:
maxItems: 1
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/crypto/st,stm32-hash.yaml b/dts/upstream/Bindings/crypto/st,stm32-hash.yaml
index ac48076..8223184 100644
--- a/dts/upstream/Bindings/crypto/st,stm32-hash.yaml
+++ b/dts/upstream/Bindings/crypto/st,stm32-hash.yaml
@@ -51,6 +51,10 @@ properties:
power-domains:
maxItems: 1
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/crypto/starfive,jh7110-crypto.yaml b/dts/upstream/Bindings/crypto/starfive,jh7110-crypto.yaml
index 71a2876..7ccb6e1 100644
--- a/dts/upstream/Bindings/crypto/starfive,jh7110-crypto.yaml
+++ b/dts/upstream/Bindings/crypto/starfive,jh7110-crypto.yaml
@@ -12,7 +12,9 @@ maintainers:
properties:
compatible:
- const: starfive,jh7110-crypto
+ enum:
+ - starfive,jh7110-crypto
+ - starfive,jh8100-crypto
reg:
maxItems: 1
@@ -28,7 +30,10 @@ properties:
- const: ahb
interrupts:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: SHA2 module irq
+ - description: SM3 module irq
resets:
maxItems: 1
@@ -54,6 +59,27 @@ required:
additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: starfive,jh7110-crypto
+
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ const: starfive,jh8100-crypto
+
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+
examples:
- |
crypto: crypto@16000000 {
diff --git a/dts/upstream/Bindings/crypto/ti,omap-sham.yaml b/dts/upstream/Bindings/crypto/ti,omap-sham.yaml
new file mode 100644
index 0000000..d69b502
--- /dev/null
+++ b/dts/upstream/Bindings/crypto/ti,omap-sham.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/ti,omap-sham.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP SoC SHA crypto Module
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,omap2-sham
+ - ti,omap4-sham
+ - ti,omap5-sham
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx
+
+ ti,hwmods:
+ description: Name of the hwmod associated with the SHAM module
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [sham]
+
+dependencies:
+ dmas: [dma-names]
+
+additionalProperties: false
+
+required:
+ - compatible
+ - ti,hwmods
+ - reg
+ - interrupts
+
+examples:
+ - |
+ sham@53100000 {
+ compatible = "ti,omap4-sham";
+ ti,hwmods = "sham";
+ reg = <0x53100000 0x200>;
+ interrupts = <109>;
+ dmas = <&edma 36>;
+ dma-names = "rx";
+ };
diff --git a/dts/upstream/Bindings/display/atmel,lcdc-display.yaml b/dts/upstream/Bindings/display/atmel,lcdc-display.yaml
new file mode 100644
index 0000000..a5cf040
--- /dev/null
+++ b/dts/upstream/Bindings/display/atmel,lcdc-display.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip's LCDC Display
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+ - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+ The LCD Controller (LCDC) consists of logic for transferring LCD image data
+ from an external display buffer to a TFT LCD panel. The LCDC has one display
+ input buffer per layer that fetches pixels through the single bus host
+ interface and a look-up table to allow palletized display configurations. The
+ LCDC is programmable on a per layer basis, and supports different LCD
+ resolutions, window sizes, image formats and pixel depths.
+
+# We need a select here since this schema is applicable only for nodes with the
+# following properties
+
+select:
+ anyOf:
+ - required: [ 'atmel,dmacon' ]
+ - required: [ 'atmel,lcdcon2' ]
+ - required: [ 'atmel,guard-time' ]
+
+properties:
+ atmel,dmacon:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: dma controller configuration
+
+ atmel,lcdcon2:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: lcd controller configuration
+
+ atmel,guard-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: lcd guard time (Delay in frame periods)
+ maximum: 127
+
+ bits-per-pixel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: lcd panel bit-depth.
+ enum: [1, 2, 4, 8, 16, 24, 32]
+
+ atmel,lcdcon-backlight:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: enable backlight
+
+ atmel,lcdcon-backlight-inverted:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: invert backlight PWM polarity
+
+ atmel,lcd-wiring-mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: lcd wiring mode "RGB" or "BRG"
+ enum:
+ - RGB
+ - BRG
+
+ atmel,power-control-gpio:
+ description: gpio to power on or off the LCD (as many as needed)
+ maxItems: 1
+
+ display-timings:
+ $ref: panel/display-timings.yaml#
+
+required:
+ - atmel,dmacon
+ - atmel,lcdcon2
+ - atmel,guard-time
+ - bits-per-pixel
+
+additionalProperties: false
+
+examples:
+ - |
+ display: panel {
+ bits-per-pixel = <32>;
+ atmel,lcdcon-backlight;
+ atmel,dmacon = <0x1>;
+ atmel,lcdcon2 = <0x80008002>;
+ atmel,guard-time = <9>;
+ atmel,lcd-wiring-mode = "RGB";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <1>;
+ hfront-porch = <1>;
+ vback-porch = <40>;
+ vfront-porch = <1>;
+ hsync-len = <45>;
+ vsync-len = <1>;
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/display/atmel,lcdc.txt b/dts/upstream/Bindings/display/atmel,lcdc.txt
deleted file mode 100644
index b5e355a..0000000
--- a/dts/upstream/Bindings/display/atmel,lcdc.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-Atmel LCDC Framebuffer
------------------------------------------------------
-
-Required properties:
-- compatible :
- "atmel,at91sam9261-lcdc" ,
- "atmel,at91sam9263-lcdc" ,
- "atmel,at91sam9g10-lcdc" ,
- "atmel,at91sam9g45-lcdc" ,
- "atmel,at91sam9g45es-lcdc" ,
- "atmel,at91sam9rl-lcdc" ,
-- reg : Should contain 1 register ranges(address and length).
- Can contain an additional register range(address and length)
- for fixed framebuffer memory. Useful for dedicated memories.
-- interrupts : framebuffer controller interrupt
-- display: a phandle pointing to the display node
-
-Required nodes:
-- display: a display node is required to initialize the lcd panel
- This should be in the board dts.
-- default-mode: a videomode within the display with timing parameters
- as specified below.
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-
-Example:
-
- fb0: fb@00500000 {
- compatible = "atmel,at91sam9g45-lcdc";
- reg = <0x00500000 0x1000>;
- interrupts = <23 3 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fb>;
- display = <&display0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- };
-
-Example for fixed framebuffer memory:
-
- fb0: fb@00500000 {
- compatible = "atmel,at91sam9263-lcdc";
- reg = <0x00700000 0x1000 0x70000000 0x200000>;
- [...]
- };
-
-Atmel LCDC Display
------------------------------------------------------
-Required properties (as per of_videomode_helper):
-
- - atmel,dmacon: dma controller configuration
- - atmel,lcdcon2: lcd controller configuration
- - atmel,guard-time: lcd guard time (Delay in frame periods)
- - bits-per-pixel: lcd panel bit-depth.
-
-Optional properties (as per of_videomode_helper):
- - atmel,lcdcon-backlight: enable backlight
- - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
- - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
- - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
-
-Example:
- display0: display {
- bits-per-pixel = <32>;
- atmel,lcdcon-backlight;
- atmel,dmacon = <0x1>;
- atmel,lcdcon2 = <0x80008002>;
- atmel,guard-time = <9>;
- atmel,lcd-wiring-mode = <1>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <1>;
- hfront-porch = <1>;
- vback-porch = <40>;
- vfront-porch = <1>;
- hsync-len = <45>;
- vsync-len = <1>;
- };
- };
- };
diff --git a/dts/upstream/Bindings/display/atmel,lcdc.yaml b/dts/upstream/Bindings/display/atmel,lcdc.yaml
new file mode 100644
index 0000000..1b6f7e3
--- /dev/null
+++ b/dts/upstream/Bindings/display/atmel,lcdc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip's LCDC Framebuffer
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+ - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+ The LCDC works with a framebuffer, which is a section of memory that contains
+ a complete frame of data representing pixel values for the display. The LCDC
+ reads the pixel data from the framebuffer and sends it to the LCD panel to
+ render the image.
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91sam9261-lcdc
+ - atmel,at91sam9263-lcdc
+ - atmel,at91sam9g10-lcdc
+ - atmel,at91sam9g45-lcdc
+ - atmel,at91sam9g45es-lcdc
+ - atmel,at91sam9rl-lcdc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: hclk
+ - const: lcdc_clk
+
+ display:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle pointing to the display node.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - display
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ fb@500000 {
+ compatible = "atmel,at91sam9g45-lcdc";
+ reg = <0x00500000 0x1000>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+ clock-names = "hclk", "lcdc_clk";
+ display = <&display>;
+ };
diff --git a/dts/upstream/Bindings/display/bridge/ite,it6505.yaml b/dts/upstream/Bindings/display/bridge/ite,it6505.yaml
index c9a882e..c4469f4 100644
--- a/dts/upstream/Bindings/display/bridge/ite,it6505.yaml
+++ b/dts/upstream/Bindings/display/bridge/ite,it6505.yaml
@@ -9,6 +9,9 @@ title: ITE it6505
maintainers:
- Allen Chen <allen.chen@ite.com.tw>
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
description: |
The IT6505 is a high-performance DisplayPort 1.1a transmitter,
fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications.
@@ -52,6 +55,9 @@ properties:
maxItems: 1
description: extcon specifier for the Power Delivery
+ "#sound-dai-cells":
+ const: 0
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
@@ -105,7 +111,7 @@ required:
- extcon
- ports
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/dts/upstream/Bindings/display/bridge/lvds-codec.yaml b/dts/upstream/Bindings/display/bridge/lvds-codec.yaml
index 84aafcb..6ceeed7 100644
--- a/dts/upstream/Bindings/display/bridge/lvds-codec.yaml
+++ b/dts/upstream/Bindings/display/bridge/lvds-codec.yaml
@@ -41,6 +41,7 @@ properties:
- enum:
- ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
- ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+ - ti,sn65lvds94 # For the SN65DS94 LVDS serdes
- const: lvds-decoder # Generic LVDS decoders compatible fallback
- enum:
- thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
diff --git a/dts/upstream/Bindings/display/bridge/microchip,sam9x75-lvds.yaml b/dts/upstream/Bindings/display/bridge/microchip,sam9x75-lvds.yaml
new file mode 100644
index 0000000..862ef44
--- /dev/null
+++ b/dts/upstream/Bindings/display/bridge/microchip,sam9x75-lvds.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/microchip,sam9x75-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SAM9X75 LVDS Controller
+
+maintainers:
+ - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+ The Low Voltage Differential Signaling Controller (LVDSC) manages data
+ format conversion from the LCD Controller internal DPI bus to OpenLDI
+ LVDS output signals. LVDSC functions include bit mapping, balanced mode
+ management, and serializer.
+
+properties:
+ compatible:
+ const: microchip,sam9x75-lvds
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Peripheral Bus Clock
+
+ clock-names:
+ items:
+ - const: pclk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/at91.h>
+ lvds-controller@f8060000 {
+ compatible = "microchip,sam9x75-lvds";
+ reg = <0xf8060000 0x100>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+ clock-names = "pclk";
+ };
diff --git a/dts/upstream/Bindings/display/bridge/toshiba,tc358775.yaml b/dts/upstream/Bindings/display/bridge/toshiba,tc358775.yaml
index d879c70..258dd9c 100644
--- a/dts/upstream/Bindings/display/bridge/toshiba,tc358775.yaml
+++ b/dts/upstream/Bindings/display/bridge/toshiba,tc358775.yaml
@@ -10,7 +10,7 @@ maintainers:
- Vinay Simha BN <simhavcs@gmail.com>
description: |
- This binding supports DSI to LVDS bridge TC358775
+ This binding supports DSI to LVDS bridges TC358765 and TC358775
MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
Video frame size:
@@ -21,7 +21,9 @@ description: |
properties:
compatible:
- const: toshiba,tc358775
+ enum:
+ - toshiba,tc358765
+ - toshiba,tc358775
reg:
maxItems: 1
@@ -46,11 +48,27 @@ properties:
properties:
port@0:
- $ref: /schemas/graph.yaml#/properties/port
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: |
DSI Input. The remote endpoint phandle should be a
reference to a valid mipi_dsi_host device node.
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: |
@@ -70,10 +88,19 @@ required:
- reg
- vdd-supply
- vddio-supply
- - stby-gpios
- reset-gpios
- ports
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: toshiba,tc358765
+ then:
+ properties:
+ stby-gpios: false
+
additionalProperties: false
examples:
@@ -108,6 +135,7 @@ examples:
reg = <0>;
d2l_in_test: endpoint {
remote-endpoint = <&dsi0_out>;
+ data-lanes = <1 2 3 4>;
};
};
@@ -132,7 +160,6 @@ examples:
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&d2l_in_test>;
- data-lanes = <0 1 2 3>;
};
};
};
@@ -167,6 +194,7 @@ examples:
reg = <0>;
d2l_in_dual: endpoint {
remote-endpoint = <&dsi0_out_dual>;
+ data-lanes = <1 2 3 4>;
};
};
@@ -198,7 +226,6 @@ examples:
reg = <1>;
dsi0_out_dual: endpoint {
remote-endpoint = <&d2l_in_dual>;
- data-lanes = <0 1 2 3>;
};
};
};
diff --git a/dts/upstream/Bindings/display/exynos/exynos_dp.txt b/dts/upstream/Bindings/display/exynos/exynos_dp.txt
deleted file mode 100644
index 3a40159..0000000
--- a/dts/upstream/Bindings/display/exynos/exynos_dp.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-The Exynos display port interface should be configured based on
-the type of panel connected to it.
-
-We use two nodes:
- -dp-controller node
- -dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy: deprecated, use phys and phy-names
- -reg: deprecated
- Base address of DP PHY register.
- -samsung,enable-mask: deprecated
- The bit-mask used to enable/disable DP PHY.
-
-For the Panel initialization, we read data from dp-controller node.
-Required properties for dp-controller:
- -compatible:
- should be "samsung,exynos5-dp".
- -reg:
- physical base address of the controller and length
- of memory mapped region.
- -interrupts:
- interrupt combiner values.
- -clocks:
- from common clock binding: handle to dp clock.
- -clock-names:
- from common clock binding: Shall be "dp".
- -phys:
- from general PHY binding: the phandle for the PHY device.
- -phy-names:
- from general PHY binding: Should be "dp".
-
-Optional properties for dp-controller:
- -interlaced:
- interlace scan mode.
- Progressive if defined, Interlaced if not defined
- -vsync-active-high:
- VSYNC polarity configuration.
- High if defined, Low if not defined
- -hsync-active-high:
- HSYNC polarity configuration.
- High if defined, Low if not defined
- -samsung,hpd-gpio:
- Hotplug detect GPIO.
- Indicates which GPIO should be used for hotplug
- detection
- -video interfaces: Device node can contain video interface port
- nodes according to [1].
- - display-timings: timings for the connected panel as described by
- Documentation/devicetree/bindings/display/panel/display-timing.txt
-
-For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
- -phys (required)
- -phy-names (required)
- -hpd-gpios (optional)
- force-hpd (optional)
-
-Deprecated properties for DisplayPort:
--interlaced: deprecated prop that can parsed from drm_display_mode.
--vsync-active-high: deprecated prop that can parsed from drm_display_mode.
--hsync-active-high: deprecated prop that can parsed from drm_display_mode.
--samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode.
--samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
--samsung,color-space: deprecated prop that can parsed from drm_display_info.
--samsung,color-depth: deprecated prop that can parsed from drm_display_info.
--samsung,link-rate: deprecated prop that can reading from monitor by dpcd method.
--samsung,lane-count: deprecated prop that can reading from monitor by dpcd method.
--samsung,hpd-gpio: deprecated name for hpd-gpios.
-
--------------------------------------------------------------------------------
-
-Example:
-
-SOC specific portion:
- dp-controller {
- compatible = "samsung,exynos5-dp";
- reg = <0x145b0000 0x10000>;
- interrupts = <10 3>;
- interrupt-parent = <&combiner>;
- clocks = <&clock 342>;
- clock-names = "dp";
-
- phys = <&dp_phy>;
- phy-names = "dp";
- };
-
-Board Specific portion:
- dp-controller {
- display-timings {
- native-mode = <&lcd_timing>;
- lcd_timing: 1366x768 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
- };
-
- ports {
- port@0 {
- dp_out: endpoint {
- remote-endpoint = <&bridge_in>;
- };
- };
- };
- };
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml
index c6641ac..b8b8e83 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml
@@ -24,6 +24,7 @@ properties:
- enum:
- mediatek,mt8173-disp-gamma
- mediatek,mt8183-disp-gamma
+ - mediatek,mt8195-disp-gamma
- items:
- enum:
- mediatek,mt6795-disp-gamma
@@ -35,6 +36,10 @@ properties:
- mediatek,mt8192-disp-gamma
- mediatek,mt8195-disp-gamma
- const: mediatek,mt8183-disp-gamma
+ - items:
+ - enum:
+ - mediatek,mt8188-disp-gamma
+ - const: mediatek,mt8195-disp-gamma
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/display/msm/dp-controller.yaml b/dts/upstream/Bindings/display/msm/dp-controller.yaml
index ae53cbf..97993fe 100644
--- a/dts/upstream/Bindings/display/msm/dp-controller.yaml
+++ b/dts/upstream/Bindings/display/msm/dp-controller.yaml
@@ -29,6 +29,7 @@ properties:
- qcom,sm8650-dp
- items:
- enum:
+ - qcom,sm6350-dp
- qcom,sm8150-dp
- qcom,sm8250-dp
- qcom,sm8450-dp
diff --git a/dts/upstream/Bindings/display/msm/qcom,sm6350-mdss.yaml b/dts/upstream/Bindings/display/msm/qcom,sm6350-mdss.yaml
index c9ba1fa..bba666b 100644
--- a/dts/upstream/Bindings/display/msm/qcom,sm6350-mdss.yaml
+++ b/dts/upstream/Bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -53,6 +53,15 @@ patternProperties:
compatible:
const: qcom,sm6350-dpu
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ contains:
+ const: qcom,sm6350-dp
+
"^dsi@[0-9a-f]+$":
type: object
additionalProperties: true
diff --git a/dts/upstream/Bindings/display/panel/abt,y030xx067a.yaml b/dts/upstream/Bindings/display/panel/abt,y030xx067a.yaml
index acd2f3f..0aa2d3f 100644
--- a/dts/upstream/Bindings/display/panel/abt,y030xx067a.yaml
+++ b/dts/upstream/Bindings/display/panel/abt,y030xx067a.yaml
@@ -17,10 +17,12 @@ properties:
compatible:
const: abt,y030xx067a
+ reg:
+ maxItems: 1
+
backlight: true
port: true
power-supply: true
- reg: true
reset-gpios: true
required:
diff --git a/dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
index 75a09df..2399cab 100644
--- a/dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
+++ b/dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
@@ -21,7 +21,10 @@ allOf:
properties:
compatible:
const: asus,z00t-tm5p5-n35596
- reg: true
+
+ reg:
+ maxItems: 1
+
reset-gpios: true
vdd-supply:
description: core voltage supply
diff --git a/dts/upstream/Bindings/display/panel/boe,bf060y8m-aj0.yaml b/dts/upstream/Bindings/display/panel/boe,bf060y8m-aj0.yaml
index a8f3afa..8b7448a 100644
--- a/dts/upstream/Bindings/display/panel/boe,bf060y8m-aj0.yaml
+++ b/dts/upstream/Bindings/display/panel/boe,bf060y8m-aj0.yaml
@@ -26,6 +26,9 @@ properties:
compatible:
const: boe,bf060y8m-aj0
+ reg:
+ maxItems: 1
+
elvdd-supply:
description: EL Driving positive (VDD) supply (4.40-4.80V)
elvss-supply:
@@ -38,7 +41,6 @@ properties:
description: I/O voltage supply (1.62-1.98V)
port: true
- reg: true
reset-gpios: true
required:
diff --git a/dts/upstream/Bindings/display/panel/boe,himax8279d.yaml b/dts/upstream/Bindings/display/panel/boe,himax8279d.yaml
index 272a3a0..f2496cd 100644
--- a/dts/upstream/Bindings/display/panel/boe,himax8279d.yaml
+++ b/dts/upstream/Bindings/display/panel/boe,himax8279d.yaml
@@ -18,9 +18,11 @@ properties:
- const: boe,himax8279d8p
- const: boe,himax8279d10p
+ reg:
+ maxItems: 1
+
backlight: true
enable-gpios: true
- reg: true
pp33-gpios:
maxItems: 1
diff --git a/dts/upstream/Bindings/display/panel/boe,th101mb31ig002-28a.yaml b/dts/upstream/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
index 32df26c..5eaccce 100644
--- a/dts/upstream/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
+++ b/dts/upstream/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
@@ -18,7 +18,9 @@ properties:
# BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
- boe,th101mb31ig002-28a
- reg: true
+ reg:
+ maxItems: 1
+
backlight: true
enable-gpios: true
power-supply: true
diff --git a/dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml b/dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml
index 906ef62..9e603ca 100644
--- a/dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -38,7 +38,7 @@ properties:
- starry,ili9882t
reg:
- description: the virtual channel number of a DSI peripheral
+ maxItems: 1
enable-gpios:
description: a GPIO spec for the enable pin
diff --git a/dts/upstream/Bindings/display/panel/elida,kd35t133.yaml b/dts/upstream/Bindings/display/panel/elida,kd35t133.yaml
index 265ab6d..f4cb825 100644
--- a/dts/upstream/Bindings/display/panel/elida,kd35t133.yaml
+++ b/dts/upstream/Bindings/display/panel/elida,kd35t133.yaml
@@ -15,7 +15,10 @@ allOf:
properties:
compatible:
const: elida,kd35t133
- reg: true
+
+ reg:
+ maxItems: 1
+
backlight: true
port: true
reset-gpios: true
diff --git a/dts/upstream/Bindings/display/panel/fascontek,fs035vg158.yaml b/dts/upstream/Bindings/display/panel/fascontek,fs035vg158.yaml
index d13c4bd..9847da7 100644
--- a/dts/upstream/Bindings/display/panel/fascontek,fs035vg158.yaml
+++ b/dts/upstream/Bindings/display/panel/fascontek,fs035vg158.yaml
@@ -17,6 +17,9 @@ properties:
compatible:
const: fascontek,fs035vg158
+ reg:
+ maxItems: 1
+
spi-3wire: true
required:
diff --git a/dts/upstream/Bindings/display/panel/feixin,k101-im2ba02.yaml b/dts/upstream/Bindings/display/panel/feixin,k101-im2ba02.yaml
index 81adb82..0d8707a 100644
--- a/dts/upstream/Bindings/display/panel/feixin,k101-im2ba02.yaml
+++ b/dts/upstream/Bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -15,7 +15,10 @@ allOf:
properties:
compatible:
const: feixin,k101-im2ba02
- reg: true
+
+ reg:
+ maxItems: 1
+
backlight: true
reset-gpios: true
avdd-supply:
diff --git a/dts/upstream/Bindings/display/panel/himax,hx83112a.yaml b/dts/upstream/Bindings/display/panel/himax,hx83112a.yaml
index 174661d..56bcd15 100644
--- a/dts/upstream/Bindings/display/panel/himax,hx83112a.yaml
+++ b/dts/upstream/Bindings/display/panel/himax,hx83112a.yaml
@@ -21,6 +21,9 @@ properties:
contains:
const: djn,9a-3r063-1102b
+ reg:
+ maxItems: 1
+
vdd1-supply:
description: Digital voltage rail
@@ -30,7 +33,6 @@ properties:
vsp-supply:
description: Negative source voltage rail
- reg: true
port: true
required:
diff --git a/dts/upstream/Bindings/display/panel/himax,hx8394.yaml b/dts/upstream/Bindings/display/panel/himax,hx8394.yaml
index 916bb7f..644387e 100644
--- a/dts/upstream/Bindings/display/panel/himax,hx8394.yaml
+++ b/dts/upstream/Bindings/display/panel/himax,hx8394.yaml
@@ -26,7 +26,8 @@ properties:
- powkiddy,x55-panel
- const: himax,hx8394
- reg: true
+ reg:
+ maxItems: 1
reset-gpios: true
diff --git a/dts/upstream/Bindings/display/panel/ilitek,ili9163.yaml b/dts/upstream/Bindings/display/panel/ilitek,ili9163.yaml
index 3cabbba..ef5a224 100644
--- a/dts/upstream/Bindings/display/panel/ilitek,ili9163.yaml
+++ b/dts/upstream/Bindings/display/panel/ilitek,ili9163.yaml
@@ -24,6 +24,9 @@ properties:
- newhaven,1.8-128160EF
- const: ilitek,ili9163
+ reg:
+ maxItems: 1
+
spi-max-frequency:
maximum: 32000000
@@ -32,7 +35,6 @@ properties:
description: Display data/command selection (D/CX)
backlight: true
- reg: true
reset-gpios: true
rotation: true
diff --git a/dts/upstream/Bindings/display/panel/ilitek,ili9322.yaml b/dts/upstream/Bindings/display/panel/ilitek,ili9322.yaml
index 7d221ef..4442346 100644
--- a/dts/upstream/Bindings/display/panel/ilitek,ili9322.yaml
+++ b/dts/upstream/Bindings/display/panel/ilitek,ili9322.yaml
@@ -26,6 +26,9 @@ properties:
- dlink,dir-685-panel
- const: ilitek,ili9322
+ reg:
+ maxItems: 1
+
reset-gpios: true
port: true
diff --git a/dts/upstream/Bindings/display/panel/ilitek,ili9341.yaml b/dts/upstream/Bindings/display/panel/ilitek,ili9341.yaml
index 94f169e..5f41758 100644
--- a/dts/upstream/Bindings/display/panel/ilitek,ili9341.yaml
+++ b/dts/upstream/Bindings/display/panel/ilitek,ili9341.yaml
@@ -28,7 +28,8 @@ properties:
- canaan,kd233-tft
- const: ilitek,ili9341
- reg: true
+ reg:
+ maxItems: 1
dc-gpios:
maxItems: 1
diff --git a/dts/upstream/Bindings/display/panel/ilitek,ili9805.yaml b/dts/upstream/Bindings/display/panel/ilitek,ili9805.yaml
index f4f91f9..ff67129 100644
--- a/dts/upstream/Bindings/display/panel/ilitek,ili9805.yaml
+++ b/dts/upstream/Bindings/display/panel/ilitek,ili9805.yaml
@@ -20,9 +20,11 @@ properties:
- tianma,tm041xdhg01
- const: ilitek,ili9805
+ reg:
+ maxItems: 1
+
avdd-supply: true
dvdd-supply: true
- reg: true
required:
- compatible
diff --git a/dts/upstream/Bindings/display/panel/ilitek,ili9881c.yaml b/dts/upstream/Bindings/display/panel/ilitek,ili9881c.yaml
index b1e624b..baf5dfe 100644
--- a/dts/upstream/Bindings/display/panel/ilitek,ili9881c.yaml
+++ b/dts/upstream/Bindings/display/panel/ilitek,ili9881c.yaml
@@ -19,13 +19,16 @@ properties:
- ampire,am8001280g
- bananapi,lhr050h41
- feixin,k101-im2byl02
+ - startek,kd050hdfia020
- tdo,tl050hdv35
- wanchanglong,w552946aba
- const: ilitek,ili9881c
+ reg:
+ maxItems: 1
+
backlight: true
power-supply: true
- reg: true
reset-gpios: true
rotation: true
diff --git a/dts/upstream/Bindings/display/panel/innolux,ej030na.yaml b/dts/upstream/Bindings/display/panel/innolux,ej030na.yaml
index 72788e3..c7df9a7 100644
--- a/dts/upstream/Bindings/display/panel/innolux,ej030na.yaml
+++ b/dts/upstream/Bindings/display/panel/innolux,ej030na.yaml
@@ -17,10 +17,12 @@ properties:
compatible:
const: innolux,ej030na
+ reg:
+ maxItems: 1
+
backlight: true
port: true
power-supply: true
- reg: true
reset-gpios: true
required:
diff --git a/dts/upstream/Bindings/display/panel/innolux,p097pfg.yaml b/dts/upstream/Bindings/display/panel/innolux,p097pfg.yaml
index 5a5f071..4164e3f 100644
--- a/dts/upstream/Bindings/display/panel/innolux,p097pfg.yaml
+++ b/dts/upstream/Bindings/display/panel/innolux,p097pfg.yaml
@@ -16,9 +16,11 @@ properties:
compatible:
const: innolux,p097pfg
+ reg:
+ maxItems: 1
+
backlight: true
enable-gpios: true
- reg: true
avdd-supply:
description: The regulator that provides positive voltage
diff --git a/dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml b/dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml
index 41eb7fb..20afdb4 100644
--- a/dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml
+++ b/dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -21,7 +21,8 @@ properties:
- radxa,display-8hd-ad002
- const: jadard,jd9365da-h3
- reg: true
+ reg:
+ maxItems: 1
vdd-supply:
description: supply regulator for VDD, usually 3.3V
diff --git a/dts/upstream/Bindings/display/panel/jdi,lpm102a188a.yaml b/dts/upstream/Bindings/display/panel/jdi,lpm102a188a.yaml
index 2f4d27a..a862145 100644
--- a/dts/upstream/Bindings/display/panel/jdi,lpm102a188a.yaml
+++ b/dts/upstream/Bindings/display/panel/jdi,lpm102a188a.yaml
@@ -26,7 +26,9 @@ properties:
compatible:
const: jdi,lpm102a188a
- reg: true
+ reg:
+ maxItems: 1
+
enable-gpios: true
reset-gpios: true
power-supply: true
diff --git a/dts/upstream/Bindings/display/panel/jdi,lt070me05000.yaml b/dts/upstream/Bindings/display/panel/jdi,lt070me05000.yaml
index 63c82a4..0c8b5cb 100644
--- a/dts/upstream/Bindings/display/panel/jdi,lt070me05000.yaml
+++ b/dts/upstream/Bindings/display/panel/jdi,lt070me05000.yaml
@@ -16,8 +16,10 @@ properties:
compatible:
const: jdi,lt070me05000
+ reg:
+ maxItems: 1
+
enable-gpios: true
- reg: true
reset-gpios: true
vddp-supply:
diff --git a/dts/upstream/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/dts/upstream/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
index b4be9bd..d86c916 100644
--- a/dts/upstream/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+++ b/dts/upstream/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -17,10 +17,12 @@ properties:
compatible:
const: kingdisplay,kd035g6-54nt
+ reg:
+ maxItems: 1
+
backlight: true
port: true
power-supply: true
- reg: true
reset-gpios: true
spi-3wire: true
diff --git a/dts/upstream/Bindings/display/panel/leadtek,ltk035c5444t.yaml b/dts/upstream/Bindings/display/panel/leadtek,ltk035c5444t.yaml
index 7a55961..b5dc02b 100644
--- a/dts/upstream/Bindings/display/panel/leadtek,ltk035c5444t.yaml
+++ b/dts/upstream/Bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -18,6 +18,9 @@ properties:
compatible:
const: leadtek,ltk035c5444t
+ reg:
+ maxItems: 1
+
spi-3wire: true
required:
diff --git a/dts/upstream/Bindings/display/panel/leadtek,ltk050h3146w.yaml b/dts/upstream/Bindings/display/panel/leadtek,ltk050h3146w.yaml
index a40ab88..e2a2dd4 100644
--- a/dts/upstream/Bindings/display/panel/leadtek,ltk050h3146w.yaml
+++ b/dts/upstream/Bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -18,7 +18,10 @@ properties:
- leadtek,ltk050h3146w
- leadtek,ltk050h3146w-a2
- leadtek,ltk050h3148w
- reg: true
+
+ reg:
+ maxItems: 1
+
backlight: true
reset-gpios: true
iovcc-supply:
diff --git a/dts/upstream/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/dts/upstream/Bindings/display/panel/leadtek,ltk500hd1829.yaml
index d589f16..af9e0ea 100644
--- a/dts/upstream/Bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/dts/upstream/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -17,7 +17,10 @@ properties:
enum:
- leadtek,ltk101b4029w
- leadtek,ltk500hd1829
- reg: true
+
+ reg:
+ maxItems: 1
+
backlight: true
reset-gpios: true
iovcc-supply:
diff --git a/dts/upstream/Bindings/display/panel/lg,lg4573.yaml b/dts/upstream/Bindings/display/panel/lg,lg4573.yaml
index ee357e1..590ccc2 100644
--- a/dts/upstream/Bindings/display/panel/lg,lg4573.yaml
+++ b/dts/upstream/Bindings/display/panel/lg,lg4573.yaml
@@ -21,7 +21,8 @@ properties:
compatible:
const: lg,lg4573
- reg: true
+ reg:
+ maxItems: 1
required:
- compatible
diff --git a/dts/upstream/Bindings/display/panel/lg,sw43408.yaml b/dts/upstream/Bindings/display/panel/lg,sw43408.yaml
new file mode 100644
index 0000000..1e08648
--- /dev/null
+++ b/dts/upstream/Bindings/display/panel/lg,sw43408.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,sw43408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG SW43408 1080x2160 DSI panel
+
+maintainers:
+ - Caleb Connolly <caleb.connolly@linaro.org>
+
+description:
+ This panel is used on the Pixel 3, it is a 60hz OLED panel which
+ required DSC (Display Stream Compression) and has rounded corners.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: lg,sw43408
+
+ reg: true
+ port: true
+ vddi-supply: true
+ vpnl-supply: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - vddi-supply
+ - vpnl-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "lg,sw43408";
+ reg = <0>;
+
+ vddi-supply = <&vreg_l14a_1p88>;
+ vpnl-supply = <&vreg_l28a_3p0>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/display/panel/lgphilips,lb035q02.yaml b/dts/upstream/Bindings/display/panel/lgphilips,lb035q02.yaml
index 628c4b8..3de17fd 100644
--- a/dts/upstream/Bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/dts/upstream/Bindings/display/panel/lgphilips,lb035q02.yaml
@@ -17,6 +17,9 @@ properties:
compatible:
const: lgphilips,lb035q02
+ reg:
+ maxItems: 1
+
label: true
enable-gpios: true
port: true
diff --git a/dts/upstream/Bindings/display/panel/nec,nl8048hl11.yaml b/dts/upstream/Bindings/display/panel/nec,nl8048hl11.yaml
index accf933..1cffe4d 100644
--- a/dts/upstream/Bindings/display/panel/nec,nl8048hl11.yaml
+++ b/dts/upstream/Bindings/display/panel/nec,nl8048hl11.yaml
@@ -21,9 +21,11 @@ properties:
compatible:
const: nec,nl8048hl11
+ reg:
+ maxItems: 1
+
label: true
port: true
- reg: true
reset-gpios: true
spi-max-frequency:
diff --git a/dts/upstream/Bindings/display/panel/newvision,nv3051d.yaml b/dts/upstream/Bindings/display/panel/newvision,nv3051d.yaml
index 7a634fb..d3a25a8 100644
--- a/dts/upstream/Bindings/display/panel/newvision,nv3051d.yaml
+++ b/dts/upstream/Bindings/display/panel/newvision,nv3051d.yaml
@@ -24,7 +24,9 @@ properties:
- powkiddy,rk2023-panel
- const: newvision,nv3051d
- reg: true
+ reg:
+ maxItems: 1
+
backlight: true
port: true
reset-gpios:
diff --git a/dts/upstream/Bindings/display/panel/novatek,nt35510.yaml b/dts/upstream/Bindings/display/panel/novatek,nt35510.yaml
index 91921f4..bb50fd5 100644
--- a/dts/upstream/Bindings/display/panel/novatek,nt35510.yaml
+++ b/dts/upstream/Bindings/display/panel/novatek,nt35510.yaml
@@ -24,7 +24,10 @@ properties:
string determines how the NT35510 panel driver shall be configured
to work with the indicated panel. The novatek,nt35510 compatible shall
always be provided as a fallback.
- reg: true
+
+ reg:
+ maxItems: 1
+
reset-gpios: true
vdd-supply:
description: regulator that supplies the vdd voltage
diff --git a/dts/upstream/Bindings/display/panel/novatek,nt35950.yaml b/dts/upstream/Bindings/display/panel/novatek,nt35950.yaml
index 377a05d..a9e4049 100644
--- a/dts/upstream/Bindings/display/panel/novatek,nt35950.yaml
+++ b/dts/upstream/Bindings/display/panel/novatek,nt35950.yaml
@@ -19,7 +19,7 @@ description: |
either bilinear interpolation or pixel duplication.
allOf:
- - $ref: panel-common.yaml#
+ - $ref: panel-common-dual.yaml#
properties:
compatible:
@@ -33,6 +33,9 @@ properties:
to work with the indicated panel. The novatek,nt35950 compatible shall
always be provided as a fallback.
+ reg:
+ maxItems: 1
+
reset-gpios:
maxItems: 1
description: phandle of gpio for reset line - This should be 8mA, gpio
@@ -49,7 +52,6 @@ properties:
backlight: true
ports: true
- reg: true
required:
- compatible
@@ -59,6 +61,7 @@ required:
- avee-supply
- dvdd-supply
- vddio-supply
+ - ports
additionalProperties: false
diff --git a/dts/upstream/Bindings/display/panel/novatek,nt36523.yaml b/dts/upstream/Bindings/display/panel/novatek,nt36523.yaml
index 5f7e4c4..c4bae4f 100644
--- a/dts/upstream/Bindings/display/panel/novatek,nt36523.yaml
+++ b/dts/upstream/Bindings/display/panel/novatek,nt36523.yaml
@@ -14,9 +14,6 @@ description: |
panels. Support video mode panels from China Star Optoelectronics
Technology (CSOT) and BOE Technology.
-allOf:
- - $ref: panel-common.yaml#
-
properties:
compatible:
oneOf:
@@ -30,6 +27,9 @@ properties:
- lenovo,j606f-boe-nt36523w
- const: novatek,nt36523w
+ reg:
+ maxItems: 1
+
reset-gpios:
maxItems: 1
description: phandle of gpio for reset line - This should be 8mA
@@ -37,8 +37,6 @@ properties:
vddio-supply:
description: regulator that supplies the I/O voltage
- reg: true
- ports: true
rotation: true
backlight: true
@@ -47,7 +45,26 @@ required:
- reg
- vddio-supply
- reset-gpios
- - ports
+
+allOf:
+ - $ref: panel-common-dual.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - novatek,nt36523w
+ then:
+ properties:
+ ports:
+ properties:
+ port@1: false
+ else:
+ properties:
+ port: false
+ ports:
+ required:
+ - port@1
unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/display/panel/novatek,nt36672a.yaml b/dts/upstream/Bindings/display/panel/novatek,nt36672a.yaml
index ae821f4..800a2f0 100644
--- a/dts/upstream/Bindings/display/panel/novatek,nt36672a.yaml
+++ b/dts/upstream/Bindings/display/panel/novatek,nt36672a.yaml
@@ -29,6 +29,9 @@ properties:
determines how the NT36672A panel driver is configured for the indicated
panel. The novatek,nt36672a compatible shall always be provided as a fallback.
+ reg:
+ maxItems: 1
+
reset-gpios:
maxItems: 1
description: phandle of gpio for reset line - This should be 8mA, gpio
@@ -44,7 +47,6 @@ properties:
vddneg-supply:
description: phandle of the negative boost supply regulator
- reg: true
port: true
backlight: true
diff --git a/dts/upstream/Bindings/display/panel/olimex,lcd-olinuxino.yaml b/dts/upstream/Bindings/display/panel/olimex,lcd-olinuxino.yaml
index 7246379..e5d8785 100644
--- a/dts/upstream/Bindings/display/panel/olimex,lcd-olinuxino.yaml
+++ b/dts/upstream/Bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -38,10 +38,12 @@ properties:
compatible:
const: olimex,lcd-olinuxino
+ reg:
+ maxItems: 1
+
backlight: true
enable-gpios: true
power-supply: true
- reg: true
required:
- compatible
diff --git a/dts/upstream/Bindings/display/panel/panel-common-dual.yaml b/dts/upstream/Bindings/display/panel/panel-common-dual.yaml
new file mode 100644
index 0000000..cc7ea3c
--- /dev/null
+++ b/dts/upstream/Bindings/display/panel/panel-common-dual.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-common-dual.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Dual-Link Display Panels
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+ Properties common for Panel IC supporting dual link panels. Devices might
+ support also single link.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: First link
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Second link
+
+ "#address-cells": true
+ "#size-cells": true
+
+ required:
+ - port@0
+
+# Single-panel setups are still allowed.
+oneOf:
+ - required:
+ - ports
+ - required:
+ - port
+
+additionalProperties: true
diff --git a/dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml b/dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml
index e808215..d0ac31a 100644
--- a/dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml
+++ b/dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -71,6 +71,9 @@ properties:
- shineworld,lh133k
- const: panel-mipi-dbi-spi
+ reg:
+ maxItems: 1
+
write-only:
type: boolean
description:
diff --git a/dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml b/dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml
index f9160d7..db5acd2 100644
--- a/dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml
+++ b/dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml
@@ -36,6 +36,8 @@ properties:
- jdi,fhd-r63452
# Khadas TS050 5" 1080x1920 LCD panel
- khadas,ts050
+ # Khadas TS050 V2 5" 1080x1920 LCD panel
+ - khadas,ts050v2
# Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
- kingdisplay,kd097d04
# LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
@@ -50,6 +52,8 @@ properties:
- panasonic,vvx10f004b00
# Panasonic 10" WUXGA TFT LCD panel
- panasonic,vvx10f034n00
+ # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel
+ - samsung,s6e3fa7-ams559nk06
# Samsung s6e3fc2x01 1080x2340 AMOLED panel
- samsung,s6e3fc2x01
# Samsung sofef00 1080x2280 AMOLED panel
diff --git a/dts/upstream/Bindings/display/panel/panel-simple.yaml b/dts/upstream/Bindings/display/panel/panel-simple.yaml
index a95445f..5067f5c 100644
--- a/dts/upstream/Bindings/display/panel/panel-simple.yaml
+++ b/dts/upstream/Bindings/display/panel/panel-simple.yaml
@@ -91,6 +91,8 @@ properties:
- boe,nv133fhm-n62
# BOE NV140FHM-N49 14.0" FHD a-Si FT panel
- boe,nv140fhmn49
+ # Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel
+ - cct,cmt430b19n00
# CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
- cdtech,s043wq26h-ct7
# CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel
@@ -188,6 +190,8 @@ properties:
- innolux,g121i1-l01
# Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
- innolux,g121x1-l03
+ # Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel
+ - innolux,g121xce-l01
# Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
- innolux,n116bca-ea1
# Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
@@ -272,6 +276,8 @@ properties:
- osddisplays,osd070t1718-19ts
# One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
- osddisplays,osd101t2045-53ts
+ # POWERTIP PH128800T006-ZHC01 10.1" WXGA TFT LCD panel
+ - powertip,ph128800t006-zhc01
# POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
- powertip,ph800480t013-idf02
# QiaoDian XianShi Corporation 4"3 TFT LCD panel
@@ -348,15 +354,6 @@ properties:
# Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel
- yes-optoelectronics,ytc700tlag-05-201c
- backlight: true
- ddc-i2c-bus: true
- enable-gpios: true
- port: true
- power-supply: true
- no-hpd: true
- hpd-gpios: true
- data-mapping: true
-
if:
not:
properties:
@@ -367,7 +364,7 @@ then:
properties:
data-mapping: false
-additionalProperties: false
+unevaluatedProperties: false
required:
- compatible
diff --git a/dts/upstream/Bindings/display/panel/raydium,rm67191.yaml b/dts/upstream/Bindings/display/panel/raydium,rm67191.yaml
index d62fd69..4825792 100644
--- a/dts/upstream/Bindings/display/panel/raydium,rm67191.yaml
+++ b/dts/upstream/Bindings/display/panel/raydium,rm67191.yaml
@@ -16,7 +16,9 @@ properties:
compatible:
const: raydium,rm67191
- reg: true
+ reg:
+ maxItems: 1
+
port: true
reset-gpios: true
width-mm: true
diff --git a/dts/upstream/Bindings/display/panel/raydium,rm692e5.yaml b/dts/upstream/Bindings/display/panel/raydium,rm692e5.yaml
index f436ba6..7ad223f 100644
--- a/dts/upstream/Bindings/display/panel/raydium,rm692e5.yaml
+++ b/dts/upstream/Bindings/display/panel/raydium,rm692e5.yaml
@@ -22,6 +22,9 @@ properties:
- const: fairphone,fp5-rm692e5-boe
- const: raydium,rm692e5
+ reg:
+ maxItems: 1
+
dvdd-supply:
description: Digital voltage rail
@@ -31,7 +34,6 @@ properties:
vddio-supply:
description: I/O voltage rail
- reg: true
port: true
required:
diff --git a/dts/upstream/Bindings/display/panel/raydium,rm69380.yaml b/dts/upstream/Bindings/display/panel/raydium,rm69380.yaml
new file mode 100644
index 0000000..b17765b
--- /dev/null
+++ b/dts/upstream/Bindings/display/panel/raydium,rm69380.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm69380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM69380-based DSI display panels
+
+maintainers:
+ - David Wronek <david@mainlining.org>
+
+description:
+ The Raydium RM69380 is a generic DSI panel IC used to control
+ OLED panels.
+
+allOf:
+ - $ref: panel-common-dual.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - lenovo,j716f-edo-rm69380
+ - const: raydium,rm69380
+ description: This indicates the panel manufacturer of the panel
+ that is in turn using the RM69380 panel driver. The compatible
+ string determines how the RM69380 panel driver shall be configured
+ to work with the indicated panel. The raydium,rm69380 compatible shall
+ always be provided as a fallback.
+
+ avdd-supply:
+ description: Analog voltage rail
+
+ vddio-supply:
+ description: I/O voltage rail
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be active low
+
+ reg: true
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - vddio-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "lenovo,j716f-edo-rm69380", "raydium,rm69380";
+ reg = <0>;
+
+ avdd-supply = <&panel_avdd_regulator>;
+ vddio-supply = <&vreg_l14a>;
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ panel_in_0: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ panel_in_1: endpoint {
+ remote-endpoint = <&mdss_dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/dts/upstream/Bindings/display/panel/rocktech,jh057n00900.yaml b/dts/upstream/Bindings/display/panel/rocktech,jh057n00900.yaml
index 6ec4712..4ae152c 100644
--- a/dts/upstream/Bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/dts/upstream/Bindings/display/panel/rocktech,jh057n00900.yaml
@@ -22,6 +22,8 @@ properties:
enum:
# Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
- anbernic,rg353v-panel-v2
+ # GameForce Chi 3.5" 640x480 TFT LCD panel
+ - gameforce,chi-panel
# Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel
- powkiddy,rgb10max3-panel
# Powkiddy RGB30 3.0" 720x720 TFT LCD panel
diff --git a/dts/upstream/Bindings/display/panel/ronbo,rb070d30.yaml b/dts/upstream/Bindings/display/panel/ronbo,rb070d30.yaml
index 95ce22c..04f86e0 100644
--- a/dts/upstream/Bindings/display/panel/ronbo,rb070d30.yaml
+++ b/dts/upstream/Bindings/display/panel/ronbo,rb070d30.yaml
@@ -14,7 +14,7 @@ properties:
const: ronbo,rb070d30
reg:
- description: MIPI-DSI virtual channel
+ maxItems: 1
power-gpios:
description: GPIO used for the power pin
diff --git a/dts/upstream/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/dts/upstream/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
index ccc4825..e8f9e9d 100644
--- a/dts/upstream/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -33,7 +33,9 @@ properties:
# Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
- samsung,s6e3hf2
- reg: true
+ reg:
+ maxItems: 1
+
reset-gpios: true
enable-gpios: true
te-gpios: true
diff --git a/dts/upstream/Bindings/display/panel/samsung,ams495qa01.yaml b/dts/upstream/Bindings/display/panel/samsung,ams495qa01.yaml
index 58fa073..e081c84 100644
--- a/dts/upstream/Bindings/display/panel/samsung,ams495qa01.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,ams495qa01.yaml
@@ -11,12 +11,15 @@ maintainers:
allOf:
- $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
compatible:
const: samsung,ams495qa01
- reg: true
+ reg:
+ maxItems: 1
+
reset-gpios:
description: reset gpio, must be GPIO_ACTIVE_LOW
elvdd-supply:
diff --git a/dts/upstream/Bindings/display/panel/samsung,ld9040.yaml b/dts/upstream/Bindings/display/panel/samsung,ld9040.yaml
index c0fabeb..bc92b16 100644
--- a/dts/upstream/Bindings/display/panel/samsung,ld9040.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,ld9040.yaml
@@ -17,9 +17,11 @@ properties:
compatible:
const: samsung,ld9040
+ reg:
+ maxItems: 1
+
display-timings: true
port: true
- reg: true
reset-gpios: true
vdd3-supply:
diff --git a/dts/upstream/Bindings/display/panel/samsung,lms380kf01.yaml b/dts/upstream/Bindings/display/panel/samsung,lms380kf01.yaml
index 70ffc88..7ce8540 100644
--- a/dts/upstream/Bindings/display/panel/samsung,lms380kf01.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,lms380kf01.yaml
@@ -21,7 +21,8 @@ properties:
compatible:
const: samsung,lms380kf01
- reg: true
+ reg:
+ maxItems: 1
interrupts:
description: provides an optional ESD (electrostatic discharge)
diff --git a/dts/upstream/Bindings/display/panel/samsung,lms397kf04.yaml b/dts/upstream/Bindings/display/panel/samsung,lms397kf04.yaml
index 5e77cee..9363032 100644
--- a/dts/upstream/Bindings/display/panel/samsung,lms397kf04.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,lms397kf04.yaml
@@ -20,7 +20,8 @@ properties:
compatible:
const: samsung,lms397kf04
- reg: true
+ reg:
+ maxItems: 1
reset-gpios: true
diff --git a/dts/upstream/Bindings/display/panel/samsung,s6d16d0.yaml b/dts/upstream/Bindings/display/panel/samsung,s6d16d0.yaml
index 66d1474..2af5bc4 100644
--- a/dts/upstream/Bindings/display/panel/samsung,s6d16d0.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,s6d16d0.yaml
@@ -16,8 +16,10 @@ properties:
compatible:
const: samsung,s6d16d0
+ reg:
+ maxItems: 1
+
port: true
- reg: true
reset-gpios: true
vdd1-supply:
diff --git a/dts/upstream/Bindings/display/panel/samsung,s6d27a1.yaml b/dts/upstream/Bindings/display/panel/samsung,s6d27a1.yaml
index d273faf..d749041 100644
--- a/dts/upstream/Bindings/display/panel/samsung,s6d27a1.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,s6d27a1.yaml
@@ -20,7 +20,8 @@ properties:
compatible:
const: samsung,s6d27a1
- reg: true
+ reg:
+ maxItems: 1
interrupts:
description: provides an optional ESD (electrostatic discharge)
diff --git a/dts/upstream/Bindings/display/panel/samsung,s6d7aa0.yaml b/dts/upstream/Bindings/display/panel/samsung,s6d7aa0.yaml
index 45a236d..939da65 100644
--- a/dts/upstream/Bindings/display/panel/samsung,s6d7aa0.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,s6d7aa0.yaml
@@ -24,7 +24,8 @@ properties:
- samsung,ltl101at01
- const: samsung,s6d7aa0
- reg: true
+ reg:
+ maxItems: 1
backlight:
description:
diff --git a/dts/upstream/Bindings/display/panel/samsung,s6e63m0.yaml b/dts/upstream/Bindings/display/panel/samsung,s6e63m0.yaml
index 6f1fc74..c47e2a1 100644
--- a/dts/upstream/Bindings/display/panel/samsung,s6e63m0.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,s6e63m0.yaml
@@ -18,7 +18,9 @@ properties:
compatible:
const: samsung,s6e63m0
- reg: true
+ reg:
+ maxItems: 1
+
reset-gpios: true
port: true
default-brightness: true
diff --git a/dts/upstream/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/dts/upstream/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
index b749e9e..42634fc 100644
--- a/dts/upstream/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
@@ -15,7 +15,10 @@ allOf:
properties:
compatible:
const: samsung,s6e88a0-ams452ef01
- reg: true
+
+ reg:
+ maxItems: 1
+
port: true
reset-gpios: true
vdd3-supply:
diff --git a/dts/upstream/Bindings/display/panel/samsung,s6e8aa0.yaml b/dts/upstream/Bindings/display/panel/samsung,s6e8aa0.yaml
index 200fbf1..4601fa4 100644
--- a/dts/upstream/Bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/dts/upstream/Bindings/display/panel/samsung,s6e8aa0.yaml
@@ -16,7 +16,9 @@ properties:
compatible:
const: samsung,s6e8aa0
- reg: true
+ reg:
+ maxItems: 1
+
reset-gpios: true
display-timings: true
diff --git a/dts/upstream/Bindings/display/panel/sharp,lq101r1sx01.yaml b/dts/upstream/Bindings/display/panel/sharp,lq101r1sx01.yaml
index 57b44a0..ce820b9 100644
--- a/dts/upstream/Bindings/display/panel/sharp,lq101r1sx01.yaml
+++ b/dts/upstream/Bindings/display/panel/sharp,lq101r1sx01.yaml
@@ -37,7 +37,9 @@ properties:
- enum:
- sharp,lq101r1sx01
- reg: true
+ reg:
+ maxItems: 1
+
power-supply: true
backlight: true
diff --git a/dts/upstream/Bindings/display/panel/sharp,ls043t1le01.yaml b/dts/upstream/Bindings/display/panel/sharp,ls043t1le01.yaml
index a90d0d8..b6ea246 100644
--- a/dts/upstream/Bindings/display/panel/sharp,ls043t1le01.yaml
+++ b/dts/upstream/Bindings/display/panel/sharp,ls043t1le01.yaml
@@ -16,7 +16,9 @@ properties:
compatible:
const: sharp,ls043t1le01-qhd
- reg: true
+ reg:
+ maxItems: 1
+
backlight: true
reset-gpios: true
port: true
diff --git a/dts/upstream/Bindings/display/panel/sharp,ls060t1sx01.yaml b/dts/upstream/Bindings/display/panel/sharp,ls060t1sx01.yaml
index 271c097..77a4fce 100644
--- a/dts/upstream/Bindings/display/panel/sharp,ls060t1sx01.yaml
+++ b/dts/upstream/Bindings/display/panel/sharp,ls060t1sx01.yaml
@@ -16,7 +16,9 @@ properties:
compatible:
const: sharp,ls060t1sx01
- reg: true
+ reg:
+ maxItems: 1
+
backlight: true
reset-gpios: true
port: true
diff --git a/dts/upstream/Bindings/display/panel/sitronix,st7789v.yaml b/dts/upstream/Bindings/display/panel/sitronix,st7789v.yaml
index ef162b5..0ce2ea1 100644
--- a/dts/upstream/Bindings/display/panel/sitronix,st7789v.yaml
+++ b/dts/upstream/Bindings/display/panel/sitronix,st7789v.yaml
@@ -21,7 +21,9 @@ properties:
- jasonic,jt240mhqs-hwt-ek-e3
- sitronix,st7789v
- reg: true
+ reg:
+ maxItems: 1
+
reset-gpios: true
power-supply: true
backlight: true
diff --git a/dts/upstream/Bindings/display/panel/sony,acx424akp.yaml b/dts/upstream/Bindings/display/panel/sony,acx424akp.yaml
index 059cc6d..fd778a2 100644
--- a/dts/upstream/Bindings/display/panel/sony,acx424akp.yaml
+++ b/dts/upstream/Bindings/display/panel/sony,acx424akp.yaml
@@ -22,7 +22,10 @@ properties:
enum:
- sony,acx424akp
- sony,acx424akm
- reg: true
+
+ reg:
+ maxItems: 1
+
reset-gpios: true
vddi-supply:
description: regulator that supplies the vddi voltage
diff --git a/dts/upstream/Bindings/display/panel/sony,acx565akm.yaml b/dts/upstream/Bindings/display/panel/sony,acx565akm.yaml
index 98abdf4..5a82602 100644
--- a/dts/upstream/Bindings/display/panel/sony,acx565akm.yaml
+++ b/dts/upstream/Bindings/display/panel/sony,acx565akm.yaml
@@ -17,6 +17,9 @@ properties:
compatible:
const: sony,acx565akm
+ reg:
+ maxItems: 1
+
label: true
reset-gpios: true
port: true
diff --git a/dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml b/dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml
index b6b885b..191b692 100644
--- a/dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml
+++ b/dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml
@@ -20,9 +20,12 @@ properties:
compatible:
const: sony,td4353-jdi-tama
- reg: true
+ reg:
+ maxItems: 1
backlight: true
+ width-mm: true
+ height-mm: true
vddio-supply:
description: VDDIO 1.8V supply
diff --git a/dts/upstream/Bindings/display/panel/sony,tulip-truly-nt35521.yaml b/dts/upstream/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
index 9679729..a58a313 100644
--- a/dts/upstream/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
+++ b/dts/upstream/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
@@ -21,7 +21,8 @@ properties:
compatible:
const: sony,tulip-truly-nt35521
- reg: true
+ reg:
+ maxItems: 1
positive5-supply:
description: Positive 5V supply
diff --git a/dts/upstream/Bindings/display/panel/synaptics,r63353.yaml b/dts/upstream/Bindings/display/panel/synaptics,r63353.yaml
index e5617d1..2fd6e0e 100644
--- a/dts/upstream/Bindings/display/panel/synaptics,r63353.yaml
+++ b/dts/upstream/Bindings/display/panel/synaptics,r63353.yaml
@@ -19,15 +19,17 @@ properties:
- sharp,ls068b3sx02
- const: syna,r63353
+ reg:
+ maxItems: 1
+
avdd-supply: true
dvdd-supply: true
- reg: true
required:
- compatible
+ - reg
- avdd-supply
- dvdd-supply
- - reg
- reset-gpios
- port
- backlight
diff --git a/dts/upstream/Bindings/display/panel/tpo,td.yaml b/dts/upstream/Bindings/display/panel/tpo,td.yaml
index e8c8ee8..7edd29d 100644
--- a/dts/upstream/Bindings/display/panel/tpo,td.yaml
+++ b/dts/upstream/Bindings/display/panel/tpo,td.yaml
@@ -22,7 +22,9 @@ properties:
# Toppoly TD043MTEA1 Panel
- tpo,td043mtea1
- reg: true
+ reg:
+ maxItems: 1
+
label: true
reset-gpios: true
backlight: true
diff --git a/dts/upstream/Bindings/display/panel/tpo,tpg110.yaml b/dts/upstream/Bindings/display/panel/tpo,tpg110.yaml
index f0243d1..59a3737 100644
--- a/dts/upstream/Bindings/display/panel/tpo,tpg110.yaml
+++ b/dts/upstream/Bindings/display/panel/tpo,tpg110.yaml
@@ -52,7 +52,8 @@ properties:
- const: tpo,tpg110
- const: tpo,tpg110
- reg: true
+ reg:
+ maxItems: 1
grestb-gpios:
maxItems: 1
diff --git a/dts/upstream/Bindings/display/panel/visionox,rm69299.yaml b/dts/upstream/Bindings/display/panel/visionox,rm69299.yaml
index 7723990..30047a6 100644
--- a/dts/upstream/Bindings/display/panel/visionox,rm69299.yaml
+++ b/dts/upstream/Bindings/display/panel/visionox,rm69299.yaml
@@ -20,7 +20,8 @@ properties:
compatible:
const: visionox,rm69299-1080p-display
- reg: true
+ reg:
+ maxItems: 1
vdda-supply:
description: |
diff --git a/dts/upstream/Bindings/display/panel/xinpeng,xpp055c272.yaml b/dts/upstream/Bindings/display/panel/xinpeng,xpp055c272.yaml
index c407deb..9c9743a 100644
--- a/dts/upstream/Bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/dts/upstream/Bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -15,7 +15,10 @@ allOf:
properties:
compatible:
const: xinpeng,xpp055c272
- reg: true
+
+ reg:
+ maxItems: 1
+
backlight: true
port: true
reset-gpios: true
diff --git a/dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
index af638b6..2aac622 100644
--- a/dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -15,6 +15,7 @@ description: |
allOf:
- $ref: ../bridge/synopsys,dw-hdmi.yaml#
+ - $ref: /schemas/sound/dai-common.yaml#
properties:
compatible:
@@ -124,6 +125,9 @@ properties:
description:
phandle to the GRF to mux vopl/vopb.
+ "#sound-dai-cells":
+ const: 0
+
required:
- compatible
- reg
@@ -153,6 +157,7 @@ examples:
ddc-i2c-bus = <&i2c5>;
power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
ports {
#address-cells = <1>;
diff --git a/dts/upstream/Bindings/display/rockchip/rockchip,inno-hdmi.yaml b/dts/upstream/Bindings/display/rockchip/rockchip,inno-hdmi.yaml
index be78dcf..5b87b0f 100644
--- a/dts/upstream/Bindings/display/rockchip/rockchip,inno-hdmi.yaml
+++ b/dts/upstream/Bindings/display/rockchip/rockchip,inno-hdmi.yaml
@@ -37,6 +37,9 @@ properties:
power-domains:
maxItems: 1
+ "#sound-dai-cells":
+ const: 0
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
@@ -66,6 +69,7 @@ required:
- ports
allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
- if:
properties:
compatible:
@@ -106,6 +110,7 @@ examples:
clock-names = "pclk";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_ctl>;
+ #sound-dai-cells = <0>;
ports {
#address-cells = <1>;
diff --git a/dts/upstream/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/dts/upstream/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
index 1a68a94..6d4b78a 100644
--- a/dts/upstream/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
+++ b/dts/upstream/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -10,6 +10,9 @@ maintainers:
- Sandy Huang <hjc@rock-chips.com>
- Heiko Stuebner <heiko@sntech.de>
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
properties:
compatible:
const: rockchip,rk3066-hdmi
@@ -34,6 +37,9 @@ properties:
description:
This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+ "#sound-dai-cells":
+ const: 0
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
@@ -83,6 +89,7 @@ examples:
pinctrl-names = "default";
power-domains = <&power RK3066_PD_VIO>;
rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
ports {
#address-cells = <1>;
diff --git a/dts/upstream/Bindings/display/samsung/samsung,exynos5-dp.yaml b/dts/upstream/Bindings/display/samsung/samsung,exynos5-dp.yaml
new file mode 100644
index 0000000..dda9097
--- /dev/null
+++ b/dts/upstream/Bindings/display/samsung/samsung,exynos5-dp.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5250/Exynos5420 SoC Display Port
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Seung-Woo Kim <sw0312.kim@samsung.com>
+ - Kyungmin Park <kyungmin.park@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ const: samsung,exynos5-dp
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: dp
+
+ display-timings:
+ $ref: /schemas/display/panel/display-timings.yaml#
+
+ interrupts:
+ maxItems: 1
+
+ hpd-gpios:
+ description:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: dp
+
+ power-domains:
+ maxItems: 1
+
+ interlaced:
+ type: boolean
+ deprecated: true
+ description:
+ Interlace scan mode. Progressive if defined, interlaced if not defined.
+
+ vsync-active-high:
+ type: boolean
+ deprecated: true
+ description:
+ VSYNC polarity configuration. High if defined, low if not defined
+
+ hsync-active-high:
+ type: boolean
+ deprecated: true
+ description:
+ HSYNC polarity configuration. High if defined, low if not defined
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with one endpoint connected to a dp-connector node.
+
+ required:
+ - port
+
+ samsung,hpd-gpios:
+ maxItems: 1
+ deprecated: true
+
+ samsung,ycbcr-coeff:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Deprecated prop that can parsed from drm_display_mode.
+
+ samsung,dynamic-range:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Deprecated prop that can parsed from drm_display_mode.
+
+ samsung,color-space:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Deprecated prop that can parsed from drm_display_info.
+
+ samsung,color-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Deprecated prop that can parsed from drm_display_info.
+
+ samsung,link-rate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Deprecated prop that can reading from monitor by dpcd method.
+
+ samsung,lane-count:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Deprecated prop that can reading from monitor by dpcd method.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - phys
+ - phy-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5250.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dp-controller@145b0000 {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b0000 0x1000>;
+ clocks = <&clock CLK_DP>;
+ clock-names = "dp";
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ pinctrl-0 = <&dp_hpd>;
+ pinctrl-names = "default";
+ power-domains = <&pd_disp1>;
+
+ samsung,color-space = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port {
+ dp_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/display/tegra/nvidia,tegra20-host1x.yaml b/dts/upstream/Bindings/display/tegra/nvidia,tegra20-host1x.yaml
index 94c5242..3563378 100644
--- a/dts/upstream/Bindings/display/tegra/nvidia,tegra20-host1x.yaml
+++ b/dts/upstream/Bindings/display/tegra/nvidia,tegra20-host1x.yaml
@@ -182,6 +182,15 @@ allOf:
compatible:
contains:
enum:
+ - nvidia,tegra194-host1x
+ then:
+ properties:
+ dma-coherent: true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- nvidia,tegra234-host1x
then:
properties:
@@ -226,6 +235,8 @@ allOf:
use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
usable stream IDs.
+ dma-coherent: true
+
required:
- reg-names
diff --git a/dts/upstream/Bindings/dma/fsl,edma.yaml b/dts/upstream/Bindings/dma/fsl,edma.yaml
index aa51d27..d54140f 100644
--- a/dts/upstream/Bindings/dma/fsl,edma.yaml
+++ b/dts/upstream/Bindings/dma/fsl,edma.yaml
@@ -21,8 +21,8 @@ properties:
- enum:
- fsl,vf610-edma
- fsl,imx7ulp-edma
- - fsl,imx8qm-adma
- fsl,imx8qm-edma
+ - fsl,imx8ulp-edma
- fsl,imx93-edma3
- fsl,imx93-edma4
- fsl,imx95-edma5
@@ -43,21 +43,39 @@ properties:
maxItems: 64
"#dma-cells":
+ description: |
+ Specifies the number of cells needed to encode an DMA channel.
+
+ Encode for cells number 2:
+ cell 0: index of dma channel mux instance.
+ cell 1: peripheral dma request id.
+
+ Encode for cells number 3:
+ cell 0: peripheral dma request id.
+ cell 1: dma channel priority.
+ cell 2: bitmask, defined at include/dt-bindings/dma/fsl-edma.h
enum:
- 2
- 3
dma-channels:
- minItems: 1
- maxItems: 64
+ minimum: 1
+ maximum: 64
clocks:
minItems: 1
- maxItems: 2
+ maxItems: 33
clock-names:
minItems: 1
- maxItems: 2
+ maxItems: 33
+
+ power-domains:
+ description:
+ The number of power domains matches the number of channels, arranged
+ in ascending order according to their associated DMA channels.
+ minItems: 1
+ maxItems: 64
big-endian:
description: |
@@ -70,7 +88,6 @@ required:
- compatible
- reg
- interrupts
- - clocks
- dma-channels
allOf:
@@ -80,7 +97,6 @@ allOf:
compatible:
contains:
enum:
- - fsl,imx8qm-adma
- fsl,imx8qm-edma
- fsl,imx93-edma3
- fsl,imx93-edma4
@@ -108,6 +124,7 @@ allOf:
properties:
clocks:
minItems: 2
+ maxItems: 2
clock-names:
items:
- const: dmamux0
@@ -136,6 +153,7 @@ allOf:
properties:
clock:
minItems: 2
+ maxItems: 2
clock-names:
items:
- const: dma
@@ -151,6 +169,58 @@ allOf:
dma-channels:
const: 32
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8ulp-edma
+ then:
+ properties:
+ clocks:
+ minItems: 33
+ clock-names:
+ minItems: 33
+ items:
+ oneOf:
+ - const: dma
+ - pattern: "^ch(0[0-9]|[1-2][0-9]|3[01])$"
+
+ interrupt-names: false
+ interrupts:
+ minItems: 32
+ "#dma-cells":
+ const: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,vf610-edma
+ - fsl,imx7ulp-edma
+ - fsl,imx93-edma3
+ - fsl,imx93-edma4
+ - fsl,imx95-edma5
+ - fsl,imx8ulp-edma
+ - fsl,ls1028a-edma
+ then:
+ required:
+ - clocks
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-adma
+ - fsl,imx8qm-edma
+ then:
+ required:
+ - power-domains
+ else:
+ properties:
+ power-domains: false
+
unevaluatedProperties: false
examples:
@@ -206,44 +276,27 @@ examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/imx93-clock.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
- dma-controller@44000000 {
- compatible = "fsl,imx93-edma3";
- reg = <0x44000000 0x200000>;
+ dma-controller@5a9f0000 {
+ compatible = "fsl,imx8qm-edma";
+ reg = <0x5a9f0000 0x90000>;
#dma-cells = <3>;
- dma-channels = <31>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_EDMA1_GATE>;
- clock-names = "dma";
+ dma-channels = <8>;
+ interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+ <&pd IMX_SC_R_DMA_3_CH1>,
+ <&pd IMX_SC_R_DMA_3_CH2>,
+ <&pd IMX_SC_R_DMA_3_CH3>,
+ <&pd IMX_SC_R_DMA_3_CH4>,
+ <&pd IMX_SC_R_DMA_3_CH5>,
+ <&pd IMX_SC_R_DMA_3_CH6>,
+ <&pd IMX_SC_R_DMA_3_CH7>;
};
diff --git a/dts/upstream/Bindings/dma/fsl,imx-sdma.yaml b/dts/upstream/Bindings/dma/fsl,imx-sdma.yaml
index 37135fa..738b25b 100644
--- a/dts/upstream/Bindings/dma/fsl,imx-sdma.yaml
+++ b/dts/upstream/Bindings/dma/fsl,imx-sdma.yaml
@@ -94,6 +94,7 @@ properties:
- SAI: 24
- Multi SAI: 25
- HDMI Audio: 26
+ - I2C: 27
The third cell: transfer priority ID
enum:
diff --git a/dts/upstream/Bindings/dma/qcom_hidma_mgmt.txt b/dts/upstream/Bindings/dma/qcom_hidma_mgmt.txt
deleted file mode 100644
index 1ae4748..0000000
--- a/dts/upstream/Bindings/dma/qcom_hidma_mgmt.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Qualcomm Technologies HIDMA Management interface
-
-Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
-memcpy and memset capabilities. It has been designed for virtualized
-environments.
-
-Each HIDMA HW instance consists of multiple DMA channels. These channels
-share the same bandwidth. The bandwidth utilization can be partitioned
-among channels based on the priority and weight assignments.
-
-There are only two priority levels and 15 weigh assignments possible.
-
-Other parameters here determine how much of the system bus this HIDMA
-instance can use like maximum read/write request and number of bytes to
-read/write in a single burst.
-
-Main node required properties:
-- compatible: "qcom,hidma-mgmt-1.0";
-- reg: Address range for DMA device
-- dma-channels: Number of channels supported by this DMA controller.
-- max-write-burst-bytes: Maximum write burst in bytes that HIDMA can
- occupy the bus for in a single transaction. A memcpy requested is
- fragmented to multiples of this amount. This parameter is used while
- writing into destination memory. Setting this value incorrectly can
- starve other peripherals in the system.
-- max-read-burst-bytes: Maximum read burst in bytes that HIDMA can
- occupy the bus for in a single transaction. A memcpy request is
- fragmented to multiples of this amount. This parameter is used while
- reading the source memory. Setting this value incorrectly can starve
- other peripherals in the system.
-- max-write-transactions: This value is how many times a write burst is
- applied back to back while writing to the destination before yielding
- the bus.
-- max-read-transactions: This value is how many times a read burst is
- applied back to back while reading the source before yielding the bus.
-- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
- Once a reset is applied to the HW, HW starts a timer for reset operation
- to confirm. If reset is not completed within this time, HW reports reset
- failure.
-
-Sub-nodes:
-
-HIDMA has one or more DMA channels that are used to move data from one
-memory location to another.
-
-When the OS is not in control of the management interface (i.e. it's a guest),
-the channel nodes appear on their own, not under a management node.
-
-Required properties:
-- compatible: must contain "qcom,hidma-1.0" for initial HW or
- "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW.
-- reg: Addresses for the transfer and event channel
-- interrupts: Should contain the event interrupt
-- desc-count: Number of asynchronous requests this channel can handle
-- iommus: required a iommu node
-
-Optional properties for MSI:
-- msi-parent : See the generic MSI binding described in
- devicetree/bindings/interrupt-controller/msi.txt for a description of the
- msi-parent property.
-
-Example:
-
-Hypervisor OS configuration:
-
- hidma-mgmt@f9984000 = {
- compatible = "qcom,hidma-mgmt-1.0";
- reg = <0xf9984000 0x15000>;
- dma-channels = <6>;
- max-write-burst-bytes = <1024>;
- max-read-burst-bytes = <1024>;
- max-write-transactions = <31>;
- max-read-transactions = <31>;
- channel-reset-timeout-cycles = <0x500>;
-
- hidma_24: dma-controller@5c050000 {
- compatible = "qcom,hidma-1.0";
- reg = <0 0x5c050000 0x0 0x1000>,
- <0 0x5c0b0000 0x0 0x1000>;
- interrupts = <0 389 0>;
- desc-count = <10>;
- iommus = <&system_mmu>;
- };
- };
-
-Guest OS configuration:
-
- hidma_24: dma-controller@5c050000 {
- compatible = "qcom,hidma-1.0";
- reg = <0 0x5c050000 0x0 0x1000>,
- <0 0x5c0b0000 0x0 0x1000>;
- interrupts = <0 389 0>;
- desc-count = <10>;
- iommus = <&system_mmu>;
- };
diff --git a/dts/upstream/Bindings/dma/snps,dma-spear1340.yaml b/dts/upstream/Bindings/dma/snps,dma-spear1340.yaml
index 5da8291..c21a4f0 100644
--- a/dts/upstream/Bindings/dma/snps,dma-spear1340.yaml
+++ b/dts/upstream/Bindings/dma/snps,dma-spear1340.yaml
@@ -93,10 +93,10 @@ properties:
data-width:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: Data bus width per each DMA master in bytes.
+ minItems: 1
+ maxItems: 4
items:
- maxItems: 4
- items:
- enum: [4, 8, 16, 32]
+ enum: [4, 8, 16, 32]
data_width:
$ref: /schemas/types.yaml#/definitions/uint32-array
@@ -106,28 +106,28 @@ properties:
deprecated. It' usage is discouraged in favor of data-width one. Moreover
the property incorrectly permits to define data-bus width of 8 and 16
bits, which is impossible in accordance with DW DMAC IP-core data book.
+ minItems: 1
+ maxItems: 4
items:
- maxItems: 4
- items:
- enum:
- - 0 # 8 bits
- - 1 # 16 bits
- - 2 # 32 bits
- - 3 # 64 bits
- - 4 # 128 bits
- - 5 # 256 bits
- default: 0
+ enum:
+ - 0 # 8 bits
+ - 1 # 16 bits
+ - 2 # 32 bits
+ - 3 # 64 bits
+ - 4 # 128 bits
+ - 5 # 256 bits
+ default: 0
multi-block:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: |
LLP-based multi-block transfer supported by hardware per
each DMA channel.
+ minItems: 1
+ maxItems: 8
items:
- maxItems: 8
- items:
- enum: [0, 1]
- default: 1
+ enum: [0, 1]
+ default: 1
snps,max-burst-len:
$ref: /schemas/types.yaml#/definitions/uint32-array
@@ -138,11 +138,11 @@ properties:
will be from 1 to max-burst-len words. It's an array property with one
cell per channel in the units determined by the value set in the
CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+ minItems: 1
+ maxItems: 8
items:
- maxItems: 8
- items:
- enum: [4, 8, 16, 32, 64, 128, 256]
- default: 256
+ enum: [4, 8, 16, 32, 64, 128, 256]
+ default: 256
snps,dma-protection-control:
$ref: /schemas/types.yaml#/definitions/uint32
diff --git a/dts/upstream/Bindings/dma/snps,dw-axi-dmac.yaml b/dts/upstream/Bindings/dma/snps,dw-axi-dmac.yaml
index 363cf8b..525f5f3 100644
--- a/dts/upstream/Bindings/dma/snps,dw-axi-dmac.yaml
+++ b/dts/upstream/Bindings/dma/snps,dw-axi-dmac.yaml
@@ -21,6 +21,7 @@ properties:
- snps,axi-dma-1.01a
- intel,kmb-axi-dma
- starfive,jh7110-axi-dma
+ - starfive,jh8100-axi-dma
reg:
minItems: 1
diff --git a/dts/upstream/Bindings/dma/st,stm32-dma.yaml b/dts/upstream/Bindings/dma/st,stm32-dma.yaml
index 329847e..ff935a0 100644
--- a/dts/upstream/Bindings/dma/st,stm32-dma.yaml
+++ b/dts/upstream/Bindings/dma/st,stm32-dma.yaml
@@ -82,6 +82,10 @@ properties:
description: if defined, it indicates that the controller
supports memory-to-memory transfer
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/dma/st,stm32-dmamux.yaml b/dts/upstream/Bindings/dma/st,stm32-dmamux.yaml
index e722fbc..ddf82bf 100644
--- a/dts/upstream/Bindings/dma/st,stm32-dmamux.yaml
+++ b/dts/upstream/Bindings/dma/st,stm32-dmamux.yaml
@@ -28,6 +28,10 @@ properties:
resets:
maxItems: 1
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/firmware/arm,scmi.yaml b/dts/upstream/Bindings/firmware/arm,scmi.yaml
index 4591523..7de2c29 100644
--- a/dts/upstream/Bindings/firmware/arm,scmi.yaml
+++ b/dts/upstream/Bindings/firmware/arm,scmi.yaml
@@ -247,6 +247,37 @@ properties:
reg:
const: 0x18
+ protocol@19:
+ type: object
+ allOf:
+ - $ref: '#/$defs/protocol-node'
+ - $ref: /schemas/pinctrl/pinctrl.yaml
+
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ const: 0x19
+
+ patternProperties:
+ '-pins$':
+ type: object
+ allOf:
+ - $ref: /schemas/pinctrl/pincfg-node.yaml#
+ - $ref: /schemas/pinctrl/pinmux-node.yaml#
+ unevaluatedProperties: false
+
+ description:
+ A pin multiplexing sub-node describes how to configure a
+ set of pins in some desired function.
+ A single sub-node may define several pin configurations.
+ This sub-node is using the default pinctrl bindings to configure
+ pin multiplexing and using SCMI protocol to apply a specified
+ configuration.
+
+ required:
+ - reg
+
additionalProperties: false
$defs:
@@ -355,7 +386,7 @@ examples:
scmi_dvfs: protocol@13 {
reg = <0x13>;
- #clock-cells = <1>;
+ #power-domain-cells = <1>;
mboxes = <&mhuB 1 0>,
<&mhuB 1 1>;
@@ -401,6 +432,25 @@ examples:
scmi_powercap: protocol@18 {
reg = <0x18>;
};
+
+ scmi_pinctrl: protocol@19 {
+ reg = <0x19>;
+
+ i2c2-pins {
+ groups = "g_i2c2_a", "g_i2c2_b";
+ function = "f_i2c2";
+ };
+
+ mdio-pins {
+ groups = "g_avb_mdio";
+ drive-strength = <24>;
+ };
+
+ keys_pins: keys-pins {
+ pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1";
+ bias-pull-up;
+ };
+ };
};
};
@@ -468,7 +518,7 @@ examples:
reg = <0x13>;
linaro,optee-channel-id = <1>;
shmem = <&cpu_optee_lpri0>;
- #clock-cells = <1>;
+ #power-domain-cells = <1>;
};
scmi_clk0: protocol@14 {
diff --git a/dts/upstream/Bindings/fpga/xlnx,fpga-selectmap.yaml b/dts/upstream/Bindings/fpga/xlnx,fpga-selectmap.yaml
new file mode 100644
index 0000000..0577574
--- /dev/null
+++ b/dts/upstream/Bindings/fpga/xlnx,fpga-selectmap.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-selectmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SelectMAP FPGA interface
+
+maintainers:
+ - Charles Perry <charles.perry@savoirfairelinux.com>
+
+description: |
+ Xilinx 7 Series FPGAs support a method of loading the bitstream over a
+ parallel port named the SelectMAP interface in the documentation. Only
+ the x8 mode is supported where data is loaded at one byte per rising edge of
+ the clock, with the MSB of each byte presented to the D0 pin.
+
+ Datasheets:
+ https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+
+allOf:
+ - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - xlnx,fpga-xc7s-selectmap
+ - xlnx,fpga-xc7a-selectmap
+ - xlnx,fpga-xc7k-selectmap
+ - xlnx,fpga-xc7v-selectmap
+
+ reg:
+ description:
+ At least 1 byte of memory mapped IO
+ maxItems: 1
+
+ prog-gpios:
+ description:
+ config pin (referred to as PROGRAM_B in the manual)
+ maxItems: 1
+
+ done-gpios:
+ description:
+ config status pin (referred to as DONE in the manual)
+ maxItems: 1
+
+ init-gpios:
+ description:
+ initialization status and configuration error pin
+ (referred to as INIT_B in the manual)
+ maxItems: 1
+
+ csi-gpios:
+ description:
+ chip select pin (referred to as CSI_B in the manual)
+ Optional gpio for if the bus controller does not provide a chip select.
+ maxItems: 1
+
+ rdwr-gpios:
+ description:
+ read/write select pin (referred to as RDWR_B in the manual)
+ Optional gpio for if the bus controller does not provide this pin.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - prog-gpios
+ - done-gpios
+ - init-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ fpga-mgr@8000000 {
+ compatible = "xlnx,fpga-xc7s-selectmap";
+ reg = <0x8000000 0x4>;
+ prog-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+ init-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ done-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ csi-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ rdwr-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+ };
+...
diff --git a/dts/upstream/Bindings/gpio/brcm,brcmstb-gpio.yaml b/dts/upstream/Bindings/gpio/brcm,brcmstb-gpio.yaml
index a1e71c9..f096f28 100644
--- a/dts/upstream/Bindings/gpio/brcm,brcmstb-gpio.yaml
+++ b/dts/upstream/Bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -62,6 +62,8 @@ properties:
interrupt-controller: true
+ gpio-ranges: true
+
wakeup-source:
type: boolean
description: >
@@ -88,6 +90,7 @@ examples:
interrupt-parent = <&irq0_intc>;
interrupts = <0x6>;
brcm,gpio-bank-widths = <32 32 32 24>;
+ gpio-ranges = <&pinctrl 0 0 120>;
};
upg_gio_aon: gpio@f04172c0 {
diff --git a/dts/upstream/Bindings/gpio/microchip,mpfs-gpio.yaml b/dts/upstream/Bindings/gpio/microchip,mpfs-gpio.yaml
index d481e78..d61569b 100644
--- a/dts/upstream/Bindings/gpio/microchip,mpfs-gpio.yaml
+++ b/dts/upstream/Bindings/gpio/microchip,mpfs-gpio.yaml
@@ -14,6 +14,7 @@ properties:
items:
- enum:
- microchip,mpfs-gpio
+ - microchip,coregpio-rtl-v3
reg:
maxItems: 1
@@ -43,6 +44,7 @@ properties:
default: 32
gpio-controller: true
+ gpio-line-names: true
patternProperties:
"^.+-hog(-[0-9]+)?$":
@@ -62,12 +64,21 @@ patternProperties:
- gpio-hog
- gpios
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: microchip,mpfs-gpio
+ then:
+ required:
+ - interrupts
+ - "#interrupt-cells"
+ - interrupt-controller
+
required:
- compatible
- reg
- - interrupts
- - "#interrupt-cells"
- - interrupt-controller
- "#gpio-cells"
- gpio-controller
- clocks
diff --git a/dts/upstream/Bindings/gpio/raspberrypi,firmware-gpio.txt b/dts/upstream/Bindings/gpio/raspberrypi,firmware-gpio.txt
deleted file mode 100644
index ce97265..0000000
--- a/dts/upstream/Bindings/gpio/raspberrypi,firmware-gpio.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Raspberry Pi GPIO expander
-
-The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The
-firmware exposes a mailbox interface that allows the ARM core to control the
-GPIO lines on the expander.
-
-The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi
-firmware node.
-
-Required properties:
-
-- compatible : Should be "raspberrypi,firmware-gpio"
-- gpio-controller : Marks the device node as a gpio controller
-- #gpio-cells : Should be two. The first cell is the pin number, and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-
-Example:
-
-firmware: firmware-rpi {
- compatible = "raspberrypi,bcm2835-firmware";
- mboxes = <&mailbox>;
-
- expgpio: gpio {
- compatible = "raspberrypi,firmware-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
diff --git a/dts/upstream/Bindings/gpu/arm,mali-valhall-csf.yaml b/dts/upstream/Bindings/gpu/arm,mali-valhall-csf.yaml
new file mode 100644
index 0000000..a5b4e00
--- /dev/null
+++ b/dts/upstream/Bindings/gpu/arm,mali-valhall-csf.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Valhall GPU
+
+maintainers:
+ - Liviu Dudau <liviu.dudau@arm.com>
+ - Boris Brezillon <boris.brezillon@collabora.com>
+
+properties:
+ $nodename:
+ pattern: '^gpu@[a-f0-9]+$'
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - rockchip,rk3588-mali
+ - const: arm,mali-valhall-csf # Mali Valhall GPU model/revision is fully discoverable
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Job interrupt
+ - description: MMU interrupt
+ - description: GPU interrupt
+
+ interrupt-names:
+ items:
+ - const: job
+ - const: mmu
+ - const: gpu
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: coregroup
+ - const: stacks
+
+ mali-supply: true
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ power-domains:
+ minItems: 1
+ maxItems: 5
+
+ power-domain-names:
+ minItems: 1
+ maxItems: 5
+
+ sram-supply: true
+
+ "#cooling-cells":
+ const: 2
+
+ dynamic-power-coefficient:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ A u32 value that represents the running time dynamic
+ power coefficient in units of uW/MHz/V^2. The
+ coefficient can either be calculated from power
+ measurements or derived by analysis.
+
+ The dynamic power consumption of the GPU is
+ proportional to the square of the Voltage (V) and
+ the clock frequency (f). The coefficient is used to
+ calculate the dynamic power as below -
+
+ Pdyn = dynamic-power-coefficient * V^2 * f
+
+ where voltage is in V, frequency is in MHz.
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - mali-supply
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3588-mali
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ power-domains:
+ maxItems: 1
+ power-domain-names: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/rk3588-power.h>
+
+ gpu: gpu@fb000000 {
+ compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
+ reg = <0xfb000000 0x200000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "job", "mmu", "gpu";
+ clock-names = "core", "coregroup", "stacks";
+ clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
+ <&cru CLK_GPU_STACKS>;
+ power-domains = <&power RK3588_PD_GPU>;
+ operating-points-v2 = <&gpu_opp_table>;
+ mali-supply = <&vdd_gpu_s0>;
+ sram-supply = <&vdd_gpu_mem_s0>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <675000 675000 850000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <675000 675000 850000>;
+ };
+ };
+ };
+
+...
diff --git a/dts/upstream/Bindings/hwmon/adc128d818.txt b/dts/upstream/Bindings/hwmon/adc128d818.txt
deleted file mode 100644
index d0ae46d..0000000
--- a/dts/upstream/Bindings/hwmon/adc128d818.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI ADC128D818 ADC System Monitor With Temperature Sensor
---------------------------------------------------------
-
-Operation modes:
-
- - Mode 0: 7 single-ended voltage readings (IN0-IN6),
- 1 temperature reading (internal)
- - Mode 1: 8 single-ended voltage readings (IN0-IN7),
- no temperature
- - Mode 2: 4 pseudo-differential voltage readings
- (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
- 1 temperature reading (internal)
- - Mode 3: 4 single-ended voltage readings (IN0-IN3),
- 2 pseudo-differential voltage readings
- (IN4-IN5, IN7-IN6),
- 1 temperature reading (internal)
-
-If no operation mode is configured via device tree, the driver keeps the
-currently active chip operation mode (default is mode 0).
-
-
-Required node properties:
-
- - compatible: must be set to "ti,adc128d818"
- - reg: I2C address of the device
-
-Optional node properties:
-
- - ti,mode: Operation mode (u8) (see above).
-
-
-Example (operation mode 2):
-
- adc128d818@1d {
- compatible = "ti,adc128d818";
- reg = <0x1d>;
- ti,mode = /bits/ 8 <2>;
- };
diff --git a/dts/upstream/Bindings/hwmon/adi,adm1275.yaml b/dts/upstream/Bindings/hwmon/adi,adm1275.yaml
index b680612..5b076d6 100644
--- a/dts/upstream/Bindings/hwmon/adi,adm1275.yaml
+++ b/dts/upstream/Bindings/hwmon/adi,adm1275.yaml
@@ -5,7 +5,7 @@
$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+title: Analog Devices ADM1075/ADM127x/ADM1281/ADM129x digital power monitors
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
@@ -27,6 +27,7 @@ properties:
- adi,adm1275
- adi,adm1276
- adi,adm1278
+ - adi,adm1281
- adi,adm1293
- adi,adm1294
@@ -91,6 +92,7 @@ allOf:
contains:
enum:
- adi,adm1278
+ - adi,adm1281
- adi,adm1293
- adi,adm1294
then:
diff --git a/dts/upstream/Bindings/hwmon/as370.txt b/dts/upstream/Bindings/hwmon/as370.txt
deleted file mode 100644
index d102fe7..0000000
--- a/dts/upstream/Bindings/hwmon/as370.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Bindings for Synaptics AS370 PVT sensors
-
-Required properties:
-- compatible : "syna,as370-hwmon"
-- reg : address and length of the register set.
-
-Example:
- hwmon@ea0810 {
- compatible = "syna,as370-hwmon";
- reg = <0xea0810 0xc>;
- };
diff --git a/dts/upstream/Bindings/hwmon/ibm,opal-sensor.yaml b/dts/upstream/Bindings/hwmon/ibm,opal-sensor.yaml
new file mode 100644
index 0000000..376ee7f
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/ibm,opal-sensor.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,opal-sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM POWERNV platform sensors
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - ibm,opal-sensor-cooling-fan
+ - ibm,opal-sensor-amb-temp
+ - ibm,opal-sensor-power-supply
+ - ibm,opal-sensor-power
+
+ sensor-id:
+ description:
+ An opaque id provided by the firmware to the kernel, identifies a
+ given sensor and its attribute data.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - sensor-id
+
+additionalProperties: false
+
+examples:
+ - |
+ sensor {
+ compatible = "ibm,opal-sensor-cooling-fan";
+ sensor-id = <0x7052107>;
+ };
diff --git a/dts/upstream/Bindings/hwmon/ibm,p8-occ-hwmon.txt b/dts/upstream/Bindings/hwmon/ibm,p8-occ-hwmon.txt
deleted file mode 100644
index 5dc5d2e..0000000
--- a/dts/upstream/Bindings/hwmon/ibm,p8-occ-hwmon.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Device-tree bindings for I2C-based On-Chip Controller hwmon device
-------------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,p8-occ-hwmon";
- - reg = <I2C address>; : I2C bus address
-
-Examples:
-
- i2c-bus@100 {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <100000>;
- < more properties >
-
- occ-hwmon@1 {
- compatible = "ibm,p8-occ-hwmon";
- reg = <0x50>;
- };
-
- occ-hwmon@2 {
- compatible = "ibm,p8-occ-hwmon";
- reg = <0x51>;
- };
- };
diff --git a/dts/upstream/Bindings/hwmon/ibmpowernv.txt b/dts/upstream/Bindings/hwmon/ibmpowernv.txt
deleted file mode 100644
index f93242b..0000000
--- a/dts/upstream/Bindings/hwmon/ibmpowernv.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-IBM POWERNV platform sensors
-----------------------------
-
-Required node properties:
-- compatible: must be one of
- "ibm,opal-sensor-cooling-fan"
- "ibm,opal-sensor-amb-temp"
- "ibm,opal-sensor-power-supply"
- "ibm,opal-sensor-power"
-- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
- given sensor and its attribute data
-
-Example sensors node:
-
-cooling-fan#8-data {
- sensor-id = <0x7052107>;
- compatible = "ibm,opal-sensor-cooling-fan";
-};
-
-amb-temp#1-thrs {
- sensor-id = <0x5096000>;
- compatible = "ibm,opal-sensor-amb-temp";
-};
diff --git a/dts/upstream/Bindings/hwmon/lm87.txt b/dts/upstream/Bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff39..0000000
--- a/dts/upstream/Bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
- "ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
- remote temperature sensing channel. By default the pins
- are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
- in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
- in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
- configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
- compatible = "ti,lm87";
- reg = <0x2e>;
- has-temp3;
- vcc-supply = <&reg_5v0>;
-};
diff --git a/dts/upstream/Bindings/hwmon/max6650.txt b/dts/upstream/Bindings/hwmon/max6650.txt
deleted file mode 100644
index f6bd87d..0000000
--- a/dts/upstream/Bindings/hwmon/max6650.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Bindings for MAX6651 and MAX6650 I2C fan controllers
-
-Reference:
-[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
-
-Required properties:
-- compatible : One of "maxim,max6650" or "maxim,max6651"
-- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
-
-Optional properties, default is to retain the chip's current setting:
-- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
- 12000000 uV.
-- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values
- allow more fine-grained control of slower fans.
- Valid: 1, 2, 4, 8, 16.
-- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
- driver selects closed-loop mode and the requested speed.
- This ensures the fan is already running before userspace
- takes over.
-
-Example:
- fan-max6650: max6650@1b {
- reg = <0x1b>;
- compatible = "maxim,max6650";
- maxim,fan-microvolt = <12000000>;
- maxim,fan-prescale = <4>;
- maxim,fan-target-rpm = <1200>;
- };
diff --git a/dts/upstream/Bindings/hwmon/maxim,max6650.yaml b/dts/upstream/Bindings/hwmon/maxim,max6650.yaml
new file mode 100644
index 0000000..2c26104
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/maxim,max6650.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX6650 and MAX6651 I2C Fan Controllers
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+ The MAX6650 and MAX6651 regulate and monitor the speed
+ of 5VDC/12VDC burshless fans with built-in tachometers.
+
+ Datasheets:
+ https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+properties:
+ compatible:
+ enum:
+ - maxim,max6650
+ - maxim,max6651
+
+ reg:
+ maxItems: 1
+
+ maxim,fan-microvolt:
+ description:
+ The supply voltage of the fan, either 5000000 uV or
+ 12000000 uV.
+ enum: [5000000, 12000000]
+
+ maxim,fan-prescale:
+ description:
+ Pre-scaling value, as per datasheet. Lower values
+ allow more fine-grained control of slower fans.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8, 16]
+
+ maxim,fan-target-rpm:
+ description:
+ Initial requested fan rotation speed. If specified, the
+ driver selects closed-loop mode and the requested speed.
+ This ensures the fan is already running before userspace
+ takes over.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 30000
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan-controller@1b {
+ compatible = "maxim,max6650";
+ reg = <0x1b>;
+ maxim,fan-microvolt = <12000000>;
+ maxim,fan-prescale = <4>;
+ maxim,fan-target-rpm = <1200>;
+ };
+ };
diff --git a/dts/upstream/Bindings/hwmon/pmbus/adi,adp1050.yaml b/dts/upstream/Bindings/hwmon/pmbus/adi,adp1050.yaml
new file mode 100644
index 0000000..10c2204
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/pmbus/adi,adp1050.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,adp1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP1050 digital controller with PMBus interface
+
+maintainers:
+ - Radu Sabau <radu.sabau@analog.com>
+
+description: |
+ The ADP1050 is used to monitor system voltages, currents and temperatures.
+ Through the PMBus interface, the ADP1050 targets isolated power supplies
+ and has four individual monitors for input/output voltage, input current
+ and temperature.
+ Datasheet:
+ https://www.analog.com/en/products/adp1050.html
+
+properties:
+ compatible:
+ const: adi,adp1050
+
+ reg:
+ maxItems: 1
+
+ vcc-supply: true
+
+required:
+ - compatible
+ - reg
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+
+ hwmon@70 {
+ compatible = "adi,adp1050";
+ reg = <0x70>;
+ vcc-supply = <&vcc>;
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/hwmon/pwm-fan.txt b/dts/upstream/Bindings/hwmon/pwm-fan.txt
deleted file mode 100644
index 48886f0..0000000
--- a/dts/upstream/Bindings/hwmon/pwm-fan.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has moved to pwm-fan.yaml.
diff --git a/dts/upstream/Bindings/hwmon/st,stts751.yaml b/dts/upstream/Bindings/hwmon/st,stts751.yaml
new file mode 100644
index 0000000..9c825ad
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/st,stts751.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/st,stts751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STTS751 Thermometer
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+ compatible:
+ const: st,stts751
+
+ reg:
+ maxItems: 1
+
+ smbus-timeout-disable:
+ description:
+ When set, the smbus timeout function will be disabled.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ thermometer@48 {
+ compatible = "st,stts751";
+ reg = <0x48>;
+ smbus-timeout-disable;
+ };
+ };
diff --git a/dts/upstream/Bindings/hwmon/stts751.txt b/dts/upstream/Bindings/hwmon/stts751.txt
deleted file mode 100644
index 3ee1dc3..0000000
--- a/dts/upstream/Bindings/hwmon/stts751.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* STTS751 thermometer.
-
-Required node properties:
-- compatible: "stts751"
-- reg: I2C bus address of the device
-
-Optional properties:
-- smbus-timeout-disable: when set, the smbus timeout function will be disabled
-
-Example stts751 node:
-
-temp-sensor {
- compatible = "stts751";
- reg = <0x48>;
-}
diff --git a/dts/upstream/Bindings/hwmon/syna,as370.yaml b/dts/upstream/Bindings/hwmon/syna,as370.yaml
new file mode 100644
index 0000000..1f7005f
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/syna,as370.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/syna,as370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics AS370 PVT sensors
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+ compatible:
+ const: syna,as370-hwmon
+
+ reg:
+ description:
+ Address and length of the register set.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ sensor@ea0810 {
+ compatible = "syna,as370-hwmon";
+ reg = <0xea0810 0xc>;
+ };
diff --git a/dts/upstream/Bindings/hwmon/ti,adc128d818.yaml b/dts/upstream/Bindings/hwmon/ti,adc128d818.yaml
new file mode 100644
index 0000000..a320354
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/ti,adc128d818.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+ The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
+ with a temperature sensor and an I2C interface.
+
+ Datasheets:
+ https://www.ti.com/product/ADC128D818
+
+properties:
+ compatible:
+ const: ti,adc128d818
+
+ reg:
+ maxItems: 1
+
+ ti,mode:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: |
+ Operation mode.
+ Mode 0 - 7 single-ended voltage readings (IN0-IN6), 1 temperature
+ reading (internal).
+ Mode 1 - 8 single-ended voltage readings (IN0-IN7), no temperature.
+ Mode 2 - 4 pseudo-differential voltage readings
+ (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+ Mode 3 - 4 single-ended voltage readings (IN0-IN3), 2 pseudo-differential
+ voltage readings (IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+ default: 0
+
+ vref-supply:
+ description:
+ The regulator to use as an external reference. If it does not exist, the
+ internal reference will be used.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ vref-supply = <&vref>;
+ ti,mode = /bits/ 8 <2>;
+ };
+ };
diff --git a/dts/upstream/Bindings/hwmon/ti,lm87.yaml b/dts/upstream/Bindings/hwmon/ti,lm87.yaml
new file mode 100644
index 0000000..f553235
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/ti,lm87.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LM87 Hardware Monitor
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+ The LM87 is a serial interface system hardware monitor
+ with remote diode temperature sensing.
+
+ Datasheets:
+ https://www.ti.com/product/LM87
+
+properties:
+ compatible:
+ const: ti,lm87
+
+ reg:
+ maxItems: 1
+
+ has-temp3:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ This configures pins 18 and 19 to be used as a second
+ remote temperature sensing channel. By default the pins
+ are configured as voltage input pins in0 and in5.
+
+ has-in6:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When set, pin 5 is configured to be used as voltage input
+ in6. Otherwise the pin is set as FAN1 input.
+
+ has-in7:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When set, pin 6 is configured to be used as voltage input
+ in7. Otherwise the pin is set as FAN2 input.
+
+ vcc-supply:
+ description:
+ Regulator supplying power, can be configured to measure
+ 5.0V power supply. Default is 3.3V.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@2e {
+ compatible = "ti,lm87";
+ reg = <0x2e>;
+ has-temp3;
+ vcc-supply = <&reg_5v0>;
+ };
+ };
diff --git a/dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml b/dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml
index b1c13ba..b2d19cf 100644
--- a/dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml
@@ -77,7 +77,7 @@ required:
- clocks
allOf:
- - $ref: i2c-controller.yaml
+ - $ref: /schemas/i2c/i2c-controller.yaml#
- if:
properties:
compatible:
diff --git a/dts/upstream/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/dts/upstream/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index ab151c9..580003c 100644
--- a/dts/upstream/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/dts/upstream/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -21,7 +21,7 @@ description: |
google,cros-ec-spi or google,cros-ec-i2c.
allOf:
- - $ref: i2c-controller.yaml#
+ - $ref: /schemas/i2c/i2c-controller.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/i2c/i2c-pnx.txt b/dts/upstream/Bindings/i2c/i2c-pnx.txt
deleted file mode 100644
index 2a59006..0000000
--- a/dts/upstream/Bindings/i2c/i2c-pnx.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* NXP PNX I2C Controller
-
-Required properties:
-
- - reg: Offset and length of the register set for the device
- - compatible: should be "nxp,pnx-i2c"
- - interrupts: configure one interrupt line
- - #address-cells: always 1 (for i2c addresses)
- - #size-cells: always 0
-
-Optional properties:
-
- - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
-
-Examples:
-
- i2c1: i2c@400a0000 {
- compatible = "nxp,pnx-i2c";
- reg = <0x400a0000 0x100>;
- interrupt-parent = <&mic>;
- interrupts = <51 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@400a8000 {
- compatible = "nxp,pnx-i2c";
- reg = <0x400a8000 0x100>;
- interrupt-parent = <&mic>;
- interrupts = <50 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <100000>;
- };
diff --git a/dts/upstream/Bindings/i2c/nxp,pnx-i2c.yaml b/dts/upstream/Bindings/i2c/nxp,pnx-i2c.yaml
new file mode 100644
index 0000000..798a693
--- /dev/null
+++ b/dts/upstream/Bindings/i2c/nxp,pnx-i2c.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,pnx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PNX I2C Controller
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: nxp,pnx-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency:
+ default: 100000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c@400a0000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a0000 0x100>;
+ interrupt-parent = <&mic>;
+ interrupts = <51 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml b/dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml
index f0eabff..daf4e71 100644
--- a/dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml
+++ b/dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml
@@ -26,6 +26,7 @@ properties:
- items:
- enum:
- qcom,sc7280-cci
+ - qcom,sc8280xp-cci
- qcom,sdm845-cci
- qcom,sm6350-cci
- qcom,sm8250-cci
@@ -176,6 +177,24 @@ allOf:
- const: cci
- const: cci_src
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-cci
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: slow_ahb_src
+ - const: cpas_ahb
+ - const: cci
+
additionalProperties: false
examples:
diff --git a/dts/upstream/Bindings/i2c/renesas,riic.yaml b/dts/upstream/Bindings/i2c/renesas,riic.yaml
index 2291a7c..91ecf17 100644
--- a/dts/upstream/Bindings/i2c/renesas,riic.yaml
+++ b/dts/upstream/Bindings/i2c/renesas,riic.yaml
@@ -15,14 +15,17 @@ allOf:
properties:
compatible:
- items:
- - enum:
- - renesas,riic-r7s72100 # RZ/A1H
- - renesas,riic-r7s9210 # RZ/A2M
- - renesas,riic-r9a07g043 # RZ/G2UL and RZ/Five
- - renesas,riic-r9a07g044 # RZ/G2{L,LC}
- - renesas,riic-r9a07g054 # RZ/V2L
- - const: renesas,riic-rz # RZ/A or RZ/G2L
+ oneOf:
+ - items:
+ - enum:
+ - renesas,riic-r7s72100 # RZ/A1H
+ - renesas,riic-r7s9210 # RZ/A2M
+ - renesas,riic-r9a07g043 # RZ/G2UL and RZ/Five
+ - renesas,riic-r9a07g044 # RZ/G2{L,LC}
+ - renesas,riic-r9a07g054 # RZ/V2L
+ - const: renesas,riic-rz # RZ/A or RZ/G2L
+
+ - const: renesas,riic-r9a09g057 # RZ/V2H(P)
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/i2c/st,stm32-i2c.yaml b/dts/upstream/Bindings/i2c/st,stm32-i2c.yaml
index 1b31b87..8fd8be7 100644
--- a/dts/upstream/Bindings/i2c/st,stm32-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/st,stm32-i2c.yaml
@@ -127,6 +127,10 @@ properties:
wakeup-source: true
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/iio/accel/adi,adxl345.yaml b/dts/upstream/Bindings/iio/accel/adi,adxl345.yaml
index 07cacc3..280ed47 100644
--- a/dts/upstream/Bindings/iio/accel/adi,adxl345.yaml
+++ b/dts/upstream/Bindings/iio/accel/adi,adxl345.yaml
@@ -32,6 +32,8 @@ properties:
spi-cpol: true
+ spi-3wire: true
+
interrupts:
maxItems: 1
diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7173.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7173.yaml
new file mode 100644
index 0000000..ea6cfcd
--- /dev/null
+++ b/dts/upstream/Bindings/iio/adc/adi,ad7173.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7173 ADC
+
+maintainers:
+ - Ceclan Dumitru <dumitru.ceclan@analog.com>
+
+description: |
+ Analog Devices AD717x ADC's:
+ The AD717x family offer a complete integrated Sigma-Delta ADC solution which
+ can be used in high precision, low noise single channel applications
+ (Life Science measurements) or higher speed multiplexed applications
+ (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended
+ primarily for measurement of signals close to DC but also delivers
+ outstanding performance with input bandwidths out to ~10kHz.
+
+ Datasheets for supported chips:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7177-2.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7172-2
+ - adi,ad7172-4
+ - adi,ad7173-8
+ - adi,ad7175-2
+ - adi,ad7175-8
+ - adi,ad7176-2
+ - adi,ad7177-2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: |
+ Ready: multiplexed with SPI data out. While SPI CS is low,
+ can be used to indicate the completion of a conversion.
+
+ - description: |
+ Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR,
+ and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin.
+ Therefore, the ERROR pin indicates that an error has occurred.
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: rdy
+ - const: err
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ spi-max-frequency:
+ maximum: 20000000
+
+ gpio-controller:
+ description: Marks the device node as a GPIO controller.
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell is the GPIO number and the second cell specifies
+ GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+ vref-supply:
+ description: |
+ Differential external reference supply used for conversion. The reference
+ voltage (Vref) specified here must be the voltage difference between the
+ REF+ and REF- pins: Vref = (REF+) - (REF-).
+
+ vref2-supply:
+ description: |
+ Differential external reference supply used for conversion. The reference
+ voltage (Vref2) specified here must be the voltage difference between the
+ REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-).
+
+ avdd-supply:
+ description: Avdd supply, can be used as reference for conversion.
+ This supply is referenced to AVSS, voltage specified here
+ represents (AVDD1 - AVSS).
+
+ avdd2-supply:
+ description: Avdd2 supply, used as the input to the internal voltage regulator.
+ This supply is referenced to AVSS, voltage specified here
+ represents (AVDD2 - AVSS).
+
+ iovdd-supply:
+ description: iovdd supply, used for the chip digital interface.
+
+ clocks:
+ maxItems: 1
+ description: |
+ Optional external clock source. Can include one clock source: external
+ clock or external crystal.
+
+ clock-names:
+ enum:
+ - ext-clk
+ - xtal
+
+ '#clock-cells':
+ const: 0
+
+patternProperties:
+ "^channel@[0-9a-f]$":
+ type: object
+ $ref: adc.yaml
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 15
+
+ diff-channels:
+ items:
+ minimum: 0
+ maximum: 31
+
+ adi,reference-select:
+ description: |
+ Select the reference source to use when converting on
+ the specific channel. Valid values are:
+ vref : REF+ /REF−
+ vref2 : REF2+ /REF2−
+ refout-avss: REFOUT/AVSS (Internal reference)
+ avdd : AVDD /AVSS
+
+ External reference ref2 only available on ad7173-8 and ad7172-4.
+ Internal reference refout-avss not available on ad7172-4.
+
+ If not specified, internal reference used (if available).
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - vref
+ - vref2
+ - refout-avss
+ - avdd
+ default: refout-avss
+
+ required:
+ - reg
+ - diff-channels
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ # Only ad7172-4, ad7173-8 and ad7175-8 support vref2
+ # Other models have [0-3] channel registers
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - adi,ad7172-4
+ - adi,ad7173-8
+ - adi,ad7175-8
+ then:
+ properties:
+ vref2-supply: false
+ patternProperties:
+ "^channel@[0-9a-f]$":
+ properties:
+ adi,reference-select:
+ enum:
+ - vref
+ - refout-avss
+ - avdd
+ reg:
+ maximum: 3
+
+ # Model ad7172-4 does not support internal reference
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: adi,ad7172-4
+ then:
+ patternProperties:
+ "^channel@[0-9a-f]$":
+ properties:
+ reg:
+ maximum: 7
+ adi,reference-select:
+ enum:
+ - vref
+ - vref2
+ - avdd
+ required:
+ - adi,reference-select
+
+ - if:
+ anyOf:
+ - required: [clock-names]
+ - required: [clocks]
+ then:
+ properties:
+ '#clock-cells': false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad7173-8";
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "rdy";
+ interrupt-parent = <&gpio>;
+ spi-max-frequency = <5000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #clock-cells = <0>;
+
+ vref-supply = <&dummy_regulator>;
+
+ channel@0 {
+ reg = <0>;
+ bipolar;
+ diff-channels = <0 1>;
+ adi,reference-select = "vref";
+ };
+
+ channel@1 {
+ reg = <1>;
+ diff-channels = <2 3>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ bipolar;
+ diff-channels = <4 5>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ bipolar;
+ diff-channels = <6 7>;
+ };
+
+ channel@4 {
+ reg = <4>;
+ diff-channels = <8 9>;
+ adi,reference-select = "avdd";
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7944.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7944.yaml
new file mode 100644
index 0000000..d17d184
--- /dev/null
+++ b/dts/upstream/Bindings/iio/adc/adi,ad7944.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7944.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices PulSAR LFCSP Analog to Digital Converters
+
+maintainers:
+ - Michael Hennerich <Michael.Hennerich@analog.com>
+ - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+ A family of pin-compatible single channel differential analog to digital
+ converters with SPI support in a LFCSP package.
+
+ * https://www.analog.com/en/products/ad7944.html
+ * https://www.analog.com/en/products/ad7985.html
+ * https://www.analog.com/en/products/ad7986.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7944
+ - adi,ad7985
+ - adi,ad7986
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 111111111
+
+ spi-cpol: true
+ spi-cpha: true
+
+ adi,spi-mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ single, chain ]
+ description: |
+ This property indicates the SPI wiring configuration.
+
+ When this property is omitted, it is assumed that the device is using what
+ the datasheet calls "4-wire mode". This is the conventional SPI mode used
+ when there are multiple devices on the same bus. In this mode, the CNV
+ line is used to initiate the conversion and the SDI line is connected to
+ CS on the SPI controller.
+
+ When this property is present, it indicates that the device is using one
+ of the following alternative wiring configurations:
+
+ * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's
+ definition of 3-wire mode is NOT at all related to the standard
+ spi-3wire property!) This mode is often used when the ADC is the only
+ device on the bus. In this mode, SDI is tied to VIO, and the CNV line
+ can be connected to the CS line of the SPI controller or to a GPIO, in
+ which case the CS line of the controller is unused.
+ * chain: The datasheet calls this "chain mode". This mode is used to save
+ on wiring when multiple ADCs are used. In this mode, the SDI line of
+ one chip is tied to the SDO of the next chip in the chain and the SDI of
+ the last chip in the chain is tied to GND. Only the first chip in the
+ chain is connected to the SPI bus. The CNV line of all chips are tied
+ together. The CS line of the SPI controller can be used as the CNV line
+ only if it is active high.
+
+ '#daisy-chained-devices': true
+
+ avdd-supply:
+ description: A 2.5V supply that powers the analog circuitry.
+
+ dvdd-supply:
+ description: A 2.5V supply that powers the digital circuitry.
+
+ vio-supply:
+ description:
+ A 1.8V to 2.7V supply for the digital inputs and outputs.
+
+ bvdd-supply:
+ description:
+ A voltage supply for the buffered power. When using an external reference
+ without an internal buffer (PDREF high, REFIN low), this should be
+ connected to the same supply as ref-supply. Otherwise, when using an
+ internal reference or an external reference with an internal buffer, this
+ is connected to a 5V supply.
+
+ ref-supply:
+ description:
+ Voltage regulator for the external reference voltage (REF). This property
+ is omitted when using an internal reference.
+
+ refin-supply:
+ description:
+ Voltage regulator for the reference buffer input (REFIN). When using an
+ external buffer with internal reference, this should be connected to a
+ 1.2V external reference voltage supply. Otherwise, this property is
+ omitted.
+
+ cnv-gpios:
+ description:
+ The Convert Input (CNV). This input has multiple functions. It initiates
+ the conversions and selects the SPI mode of the device (chain or CS). In
+ 'single' mode, this property is omitted if the CNV pin is connected to the
+ CS line of the SPI controller.
+ maxItems: 1
+
+ turbo-gpios:
+ description:
+ GPIO connected to the TURBO line. If omitted, it is assumed that the TURBO
+ line is hard-wired and the state is determined by the adi,always-turbo
+ property.
+ maxItems: 1
+
+ adi,always-turbo:
+ type: boolean
+ description:
+ When present, this property indicates that the TURBO line is hard-wired
+ and the state is always high. If neither this property nor turbo-gpios is
+ present, the TURBO line is assumed to be hard-wired and the state is
+ always low.
+
+ interrupts:
+ description:
+ The SDO pin can also function as a busy indicator. This node should be
+ connected to an interrupt that is triggered when the SDO line goes low
+ while the SDI line is high and the CNV line is low ('single' mode) or the
+ SDI line is low and the CNV line is high ('multi' mode); or when the SDO
+ line goes high while the SDI and CNV lines are high (chain mode),
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - dvdd-supply
+ - vio-supply
+ - bvdd-supply
+
+allOf:
+ # ref-supply and refin-supply are mutually exclusive (neither is also valid)
+ - if:
+ required:
+ - ref-supply
+ then:
+ properties:
+ refin-supply: false
+ - if:
+ required:
+ - refin-supply
+ then:
+ properties:
+ ref-supply: false
+ # in '4-wire' mode, cnv-gpios is required, for other modes it is optional
+ - if:
+ not:
+ required:
+ - adi,spi-mode
+ then:
+ required:
+ - cnv-gpios
+ # chain mode has lower SCLK max rate and doesn't work when TURBO is enabled
+ - if:
+ required:
+ - adi,spi-mode
+ properties:
+ adi,spi-mode:
+ const: chain
+ then:
+ properties:
+ spi-max-frequency:
+ maximum: 90909090
+ adi,always-turbo: false
+ required:
+ - '#daisy-chained-devices'
+ else:
+ properties:
+ '#daisy-chained-devices': false
+ # turbo-gpios and adi,always-turbo are mutually exclusive
+ - if:
+ required:
+ - turbo-gpios
+ then:
+ properties:
+ adi,always-turbo: false
+ - if:
+ required:
+ - adi,always-turbo
+ then:
+ properties:
+ turbo-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adc@0 {
+ compatible = "adi,ad7944";
+ reg = <0>;
+ spi-cpha;
+ spi-max-frequency = <111111111>;
+ avdd-supply = <&supply_2_5V>;
+ dvdd-supply = <&supply_2_5V>;
+ vio-supply = <&supply_1_8V>;
+ bvdd-supply = <&supply_5V>;
+ cnv-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ turbo-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml b/dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml
index 3d49d21..e1f450b 100644
--- a/dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml
+++ b/dts/upstream/Bindings/iio/adc/adi,axi-adc.yaml
@@ -28,6 +28,9 @@ properties:
reg:
maxItems: 1
+ clocks:
+ maxItems: 1
+
dmas:
maxItems: 1
@@ -48,6 +51,7 @@ required:
- compatible
- dmas
- reg
+ - clocks
additionalProperties: false
@@ -58,6 +62,7 @@ examples:
reg = <0x44a00000 0x10000>;
dmas = <&rx_dma 0>;
dma-names = "rx";
+ clocks = <&axi_clk>;
#io-backend-cells = <0>;
};
...
diff --git a/dts/upstream/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/dts/upstream/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
index 7ef46c9..da605a0 100644
--- a/dts/upstream/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
+++ b/dts/upstream/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
@@ -11,8 +11,13 @@ maintainers:
properties:
compatible:
- enum:
- - allwinner,sun20i-d1-gpadc
+ oneOf:
+ - enum:
+ - allwinner,sun20i-d1-gpadc
+ - items:
+ - enum:
+ - allwinner,sun50i-h616-gpadc
+ - const: allwinner,sun20i-d1-gpadc
"#io-channel-cells":
const: 1
diff --git a/dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml b/dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml
index 995cbf8..ec34c48 100644
--- a/dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml
+++ b/dts/upstream/Bindings/iio/adc/st,stm32-adc.yaml
@@ -93,6 +93,10 @@ properties:
'#size-cells':
const: 0
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
allOf:
- if:
properties:
diff --git a/dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 1970503..c1b1324 100644
--- a/dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -59,6 +59,10 @@ properties:
If not, SPI CLKOUT frequency will not be accurate.
maximum: 20000000
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml b/dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml
index 96340a0..8265d70 100644
--- a/dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml
+++ b/dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml
@@ -139,7 +139,7 @@ allOf:
Voltage output range of the channel as <minimum, maximum>
Required connections:
Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
- Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+ Rfb2x for: 0 to 10 V; -2.5 to 7.5V; -5 to 5 V;
oneOf:
- items:
- const: 0
diff --git a/dts/upstream/Bindings/iio/dac/adi,ad9739a.yaml b/dts/upstream/Bindings/iio/dac/adi,ad9739a.yaml
new file mode 100644
index 0000000..c0b3647
--- /dev/null
+++ b/dts/upstream/Bindings/iio/dac/adi,ad9739a.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad9739a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9739A RF DAC
+
+maintainers:
+ - Dragos Bogdan <dragos.bogdan@analog.com>
+ - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+ The AD9739A is a 14-bit, 2.5 GSPS high performance RF DACs that are capable
+ of synthesizing wideband signals from dc up to 3 GHz.
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad9737a_9739a.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad9739a
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-3p3-supply:
+ description: 3.3V Digital input supply.
+
+ vdd-supply:
+ description: 1.8V Digital input supply.
+
+ vdda-supply:
+ description: 3.3V Analog input supply.
+
+ vddc-supply:
+ description: 1.8V Clock input supply.
+
+ vref-supply:
+ description: Input/Output reference supply.
+
+ io-backends:
+ maxItems: 1
+
+ adi,full-scale-microamp:
+ description: This property represents the DAC full scale current.
+ minimum: 8580
+ maximum: 31700
+ default: 20000
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - io-backends
+ - vdd-3p3-supply
+ - vdd-supply
+ - vdda-supply
+ - vddc-supply
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dac@0 {
+ compatible = "adi,ad9739a";
+ reg = <0>;
+
+ clocks = <&dac_clk>;
+
+ io-backends = <&iio_backend>;
+
+ vdd-3p3-supply = <&vdd_3_3>;
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdd_3_3>;
+ vddc-supply = <&vdd>;
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/iio/dac/adi,axi-dac.yaml b/dts/upstream/Bindings/iio/dac/adi,axi-dac.yaml
new file mode 100644
index 0000000..a55e9bf
--- /dev/null
+++ b/dts/upstream/Bindings/iio/dac/adi,axi-dac.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,axi-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI DAC IP core
+
+maintainers:
+ - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+ Analog Devices Generic AXI DAC IP core for interfacing a DAC device
+ with a high speed serial (JESD204B/C) or source synchronous parallel
+ interface (LVDS/CMOS).
+ Usually, some other interface type (i.e SPI) is used as a control
+ interface for the actual DAC, while this IP core will interface
+ to the data-lines of the DAC and handle the streaming of data from
+ memory via DMA into the DAC.
+
+ https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
+
+properties:
+ compatible:
+ enum:
+ - adi,axi-dac-9.1.b
+
+ reg:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ items:
+ - const: tx
+
+ clocks:
+ maxItems: 1
+
+ '#io-backend-cells':
+ const: 0
+
+required:
+ - compatible
+ - dmas
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ dac@44a00000 {
+ compatible = "adi,axi-dac-9.1.b";
+ reg = <0x44a00000 0x10000>;
+ dmas = <&tx_dma 0>;
+ dma-names = "tx";
+ #io-backend-cells = <0>;
+ clocks = <&axi_clk>;
+ };
+...
diff --git a/dts/upstream/Bindings/iio/dac/st,stm32-dac.yaml b/dts/upstream/Bindings/iio/dac/st,stm32-dac.yaml
index 04045b9..b15de4e 100644
--- a/dts/upstream/Bindings/iio/dac/st,stm32-dac.yaml
+++ b/dts/upstream/Bindings/iio/dac/st,stm32-dac.yaml
@@ -45,6 +45,10 @@ properties:
'#size-cells':
const: 0
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
additionalProperties: false
required:
diff --git a/dts/upstream/Bindings/iio/dac/ti,dac5571.yaml b/dts/upstream/Bindings/iio/dac/ti,dac5571.yaml
index 79da032..e59db86 100644
--- a/dts/upstream/Bindings/iio/dac/ti,dac5571.yaml
+++ b/dts/upstream/Bindings/iio/dac/ti,dac5571.yaml
@@ -21,6 +21,7 @@ properties:
- ti,dac5573
- ti,dac6573
- ti,dac7573
+ - ti,dac081c081
- ti,dac121c081
reg:
diff --git a/dts/upstream/Bindings/iio/health/maxim,max30102.yaml b/dts/upstream/Bindings/iio/health/maxim,max30102.yaml
index eed0df9..205d352 100644
--- a/dts/upstream/Bindings/iio/health/maxim,max30102.yaml
+++ b/dts/upstream/Bindings/iio/health/maxim,max30102.yaml
@@ -4,16 +4,20 @@
$id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
+title: Maxim MAX30101/2 heart rate and pulse oximeter and MAX30105 particle-sensor
maintainers:
- Matt Ranostay <matt.ranostay@konsulko.com>
properties:
compatible:
- enum:
- - maxim,max30102
- - maxim,max30105
+ oneOf:
+ - enum:
+ - maxim,max30102
+ - maxim,max30105
+ - items:
+ - const: maxim,max30101
+ - const: maxim,max30105
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/iio/humidity/ti,hdc3020.yaml b/dts/upstream/Bindings/iio/humidity/ti,hdc3020.yaml
index 8b5dedd..b375d30 100644
--- a/dts/upstream/Bindings/iio/humidity/ti,hdc3020.yaml
+++ b/dts/upstream/Bindings/iio/humidity/ti,hdc3020.yaml
@@ -34,6 +34,9 @@ properties:
reg:
maxItems: 1
+ reset-gpios:
+ maxItems: 1
+
required:
- compatible
- reg
@@ -43,6 +46,7 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
@@ -54,5 +58,6 @@ examples:
vdd-supply = <&vcc_3v3>;
interrupt-parent = <&gpio3>;
interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
};
};
diff --git a/dts/upstream/Bindings/iio/imu/invensense,icm42600.yaml b/dts/upstream/Bindings/iio/imu/invensense,icm42600.yaml
index 7cd05bc..3769f8e 100644
--- a/dts/upstream/Bindings/iio/imu/invensense,icm42600.yaml
+++ b/dts/upstream/Bindings/iio/imu/invensense,icm42600.yaml
@@ -32,6 +32,8 @@ properties:
- invensense,icm42605
- invensense,icm42622
- invensense,icm42631
+ - invensense,icm42686
+ - invensense,icm42688
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/iio/imu/invensense,mpu6050.yaml b/dts/upstream/Bindings/iio/imu/invensense,mpu6050.yaml
index 297b8a1..587ff2b 100644
--- a/dts/upstream/Bindings/iio/imu/invensense,mpu6050.yaml
+++ b/dts/upstream/Bindings/iio/imu/invensense,mpu6050.yaml
@@ -62,14 +62,15 @@ properties:
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
- not:
- properties:
- compatible:
- contains:
- enum:
- - invensense,mpu9150
- - invensense,mpu9250
- - invensense,mpu9255
+ properties:
+ compatible:
+ contains:
+ enum:
+ - invensense,iam20680
+ - invensense,icm20602
+ - invensense,icm20608
+ - invensense,icm20609
+ - invensense,icm20689
then:
properties:
i2c-gate: false
diff --git a/dts/upstream/Bindings/iio/light/avago,apds9300.yaml b/dts/upstream/Bindings/iio/light/avago,apds9300.yaml
index 206af44..b750096 100644
--- a/dts/upstream/Bindings/iio/light/avago,apds9300.yaml
+++ b/dts/upstream/Bindings/iio/light/avago,apds9300.yaml
@@ -4,17 +4,22 @@
$id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Avago APDS9300 ambient light sensor
+title: Avago Gesture/RGB/ALS/Proximity sensors
maintainers:
- - Jonathan Cameron <jic23@kernel.org>
+ - Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
description: |
- Datasheet at https://www.avagotech.com/docs/AV02-1077EN
+ Datasheet: https://www.avagotech.com/docs/AV02-1077EN
+ Datasheet: https://www.avagotech.com/docs/AV02-4191EN
+ Datasheet: https://www.avagotech.com/docs/AV02-4755EN
properties:
compatible:
- const: avago,apds9300
+ enum:
+ - avago,apds9300
+ - avago,apds9306
+ - avago,apds9960
reg:
maxItems: 1
@@ -22,6 +27,8 @@ properties:
interrupts:
maxItems: 1
+ vdd-supply: true
+
additionalProperties: false
required:
@@ -30,6 +37,8 @@ required:
examples:
- |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -38,7 +47,8 @@ examples:
compatible = "avago,apds9300";
reg = <0x39>;
interrupt-parent = <&gpio2>;
- interrupts = <29 8>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&regulator_3v3>;
};
};
...
diff --git a/dts/upstream/Bindings/iio/light/avago,apds9960.yaml b/dts/upstream/Bindings/iio/light/avago,apds9960.yaml
deleted file mode 100644
index f06e0fd..0000000
--- a/dts/upstream/Bindings/iio/light/avago,apds9960.yaml
+++ /dev/null
@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Avago APDS9960 gesture/RGB/ALS/proximity sensor
-
-maintainers:
- - Matt Ranostay <matt.ranostay@konsulko.com>
-
-description: |
- Datasheet at https://www.avagotech.com/docs/AV02-4191EN
-
-properties:
- compatible:
- const: avago,apds9960
-
- reg:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
-additionalProperties: false
-
-required:
- - compatible
- - reg
-
-examples:
- - |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- light-sensor@39 {
- compatible = "avago,apds9960";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <16 1>;
- };
- };
-...
diff --git a/dts/upstream/Bindings/iio/temperature/adi,ltc2983.yaml b/dts/upstream/Bindings/iio/temperature/adi,ltc2983.yaml
index dbb8513..312febe 100644
--- a/dts/upstream/Bindings/iio/temperature/adi,ltc2983.yaml
+++ b/dts/upstream/Bindings/iio/temperature/adi,ltc2983.yaml
@@ -57,6 +57,8 @@ properties:
interrupts:
maxItems: 1
+ vdd-supply: true
+
adi,mux-delay-config-us:
description: |
Extra delay prior to each conversion, in addition to the internal 1ms
@@ -460,6 +462,7 @@ required:
- compatible
- reg
- interrupts
+ - vdd-supply
additionalProperties: false
@@ -489,6 +492,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
+ vdd-supply = <&supply>;
interrupts = <20 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gpio>;
diff --git a/dts/upstream/Bindings/input/azoteq,iqs7222.yaml b/dts/upstream/Bindings/input/azoteq,iqs7222.yaml
index 5b1769c..418c168 100644
--- a/dts/upstream/Bindings/input/azoteq,iqs7222.yaml
+++ b/dts/upstream/Bindings/input/azoteq,iqs7222.yaml
@@ -784,7 +784,7 @@ patternProperties:
gpio-2: GPIO4
allOf:
- - $ref: ../pinctrl/pincfg-node.yaml#
+ - $ref: /schemas/pinctrl/pincfg-node.yaml#
properties:
drive-open-drain: true
diff --git a/dts/upstream/Bindings/input/elan,ekth6915.yaml b/dts/upstream/Bindings/input/elan,ekth6915.yaml
index dc4ac41..a62916d 100644
--- a/dts/upstream/Bindings/input/elan,ekth6915.yaml
+++ b/dts/upstream/Bindings/input/elan,ekth6915.yaml
@@ -18,9 +18,12 @@ allOf:
properties:
compatible:
- enum:
- - elan,ekth6915
- - ilitek,ili2901
+ oneOf:
+ - items:
+ - enum:
+ - elan,ekth5015m
+ - const: elan,ekth6915
+ - const: elan,ekth6915
reg:
const: 0x10
@@ -33,6 +36,12 @@ properties:
reset-gpios:
description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+ no-reset-on-power-off:
+ type: boolean
+ description:
+ Reset line is wired so that it can (and should) be left deasserted when
+ the power supply is off.
+
vcc33-supply:
description: The 3.3V supply to the touchscreen.
@@ -58,8 +67,8 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- ap_ts: touchscreen@10 {
- compatible = "elan,ekth6915";
+ touchscreen@10 {
+ compatible = "elan,ekth5015m", "elan,ekth6915";
reg = <0x10>;
interrupt-parent = <&tlmm>;
diff --git a/dts/upstream/Bindings/input/ilitek,ili2901.yaml b/dts/upstream/Bindings/input/ilitek,ili2901.yaml
new file mode 100644
index 0000000..1abeec7
--- /dev/null
+++ b/dts/upstream/Bindings/input/ilitek,ili2901.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI2901 touchscreen controller
+
+maintainers:
+ - Jiri Kosina <jkosina@suse.com>
+
+description:
+ Supports the Ilitek ILI2901 touchscreen controller.
+ This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+ - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ilitek,ili2901
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ panel: true
+
+ reset-gpios:
+ maxItems: 1
+
+ vcc33-supply: true
+
+ vccio-supply: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vcc33-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@41 {
+ compatible = "ilitek,ili2901";
+ reg = <0x41>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ vcc33-supply = <&pp3300_ts>;
+ };
+ };
diff --git a/dts/upstream/Bindings/input/qcom,pm8xxx-vib.yaml b/dts/upstream/Bindings/input/qcom,pm8xxx-vib.yaml
index c8832cd..2025d6a 100644
--- a/dts/upstream/Bindings/input/qcom,pm8xxx-vib.yaml
+++ b/dts/upstream/Bindings/input/qcom,pm8xxx-vib.yaml
@@ -11,10 +11,18 @@ maintainers:
properties:
compatible:
- enum:
- - qcom,pm8058-vib
- - qcom,pm8916-vib
- - qcom,pm8921-vib
+ oneOf:
+ - enum:
+ - qcom,pm8058-vib
+ - qcom,pm8916-vib
+ - qcom,pm8921-vib
+ - qcom,pmi632-vib
+ - items:
+ - enum:
+ - qcom,pm7250b-vib
+ - qcom,pm7325b-vib
+ - qcom,pm7550ba-vib
+ - const: qcom,pmi632-vib
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml b/dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml
index f2808cb..745e57c 100644
--- a/dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml
@@ -39,7 +39,9 @@ properties:
- edt,edt-ft5406
- edt,edt-ft5506
- evervision,ev-ft5726
+ - focaltech,ft5452
- focaltech,ft6236
+ - focaltech,ft8719
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/input/twl4030-pwrbutton.txt b/dts/upstream/Bindings/input/twl4030-pwrbutton.txt
deleted file mode 100644
index 6c201a2..0000000
--- a/dts/upstream/Bindings/input/twl4030-pwrbutton.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/ti,twl.yaml.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
- - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
- - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
- twl_pwrbutton: pwrbutton {
- compatible = "ti,twl4030-pwrbutton";
- interrupts = <8>;
- };
-};
diff --git a/dts/upstream/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/dts/upstream/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index 8360318..f49b43f 100644
--- a/dts/upstream/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -25,12 +25,12 @@ properties:
- const: allwinner,sun6i-a31-sc-nmi
deprecated: true
- const: allwinner,sun7i-a20-sc-nmi
- - items:
- - const: allwinner,sun8i-v3s-nmi
- - const: allwinner,sun9i-a80-nmi
- const: allwinner,sun9i-a80-nmi
- items:
- - const: allwinner,sun50i-a100-nmi
+ - enum:
+ - allwinner,sun8i-v3s-nmi
+ - allwinner,sun50i-a100-nmi
+ - allwinner,sun50i-h616-nmi
- const: allwinner,sun9i-a80-nmi
reg:
diff --git a/dts/upstream/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/dts/upstream/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
index e1a379c..123d24b 100644
--- a/dts/upstream/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
@@ -48,7 +48,7 @@ properties:
interrupt-controller: true
"#interrupt-cells":
- $ref: "arm,gic.yaml#/properties/#interrupt-cells"
+ $ref: arm,gic.yaml#/properties/#interrupt-cells
required:
- reg
diff --git a/dts/upstream/Bindings/interrupt-controller/renesas,irqc.yaml b/dts/upstream/Bindings/interrupt-controller/renesas,irqc.yaml
index b417341..fb3c29e 100644
--- a/dts/upstream/Bindings/interrupt-controller/renesas,irqc.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/renesas,irqc.yaml
@@ -39,6 +39,7 @@ properties:
- renesas,intc-ex-r8a779a0 # R-Car V3U
- renesas,intc-ex-r8a779f0 # R-Car S4-8
- renesas,intc-ex-r8a779g0 # R-Car V4H
+ - renesas,intc-ex-r8a779h0 # R-Car V4M
- const: renesas,irqc
'#interrupt-cells':
diff --git a/dts/upstream/Bindings/interrupt-controller/riscv,aplic.yaml b/dts/upstream/Bindings/interrupt-controller/riscv,aplic.yaml
new file mode 100644
index 0000000..190a649
--- /dev/null
+++ b/dts/upstream/Bindings/interrupt-controller/riscv,aplic.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Advanced Platform Level Interrupt Controller (APLIC)
+
+maintainers:
+ - Anup Patel <anup@brainfault.org>
+
+description:
+ The RISC-V advanced interrupt architecture (AIA) defines an advanced
+ platform level interrupt controller (APLIC) for handling wired interrupts
+ in a RISC-V platform. The RISC-V AIA specification can be found at
+ https://github.com/riscv/riscv-aia.
+
+ The RISC-V APLIC is implemented as hierarchical APLIC domains where all
+ interrupt sources connect to the root APLIC domain and a parent APLIC
+ domain can delegate interrupt sources to it's child APLIC domains. There
+ is one device tree node for each APLIC domain.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qemu,aplic
+ - const: riscv,aplic
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts-extended:
+ minItems: 1
+ maxItems: 16384
+ description:
+ Given APLIC domain directly injects external interrupts to a set of
+ RISC-V HARTS (or CPUs). Each node pointed to should be a riscv,cpu-intc
+ node, which has a CPU node (i.e. RISC-V HART) as parent.
+
+ msi-parent:
+ description:
+ Given APLIC domain forwards wired interrupts as MSIs to a AIA incoming
+ message signaled interrupt controller (IMSIC). If both "msi-parent" and
+ "interrupts-extended" properties are present then it means the APLIC
+ domain supports both MSI mode and Direct mode in HW. In this case, the
+ APLIC driver has to choose between MSI mode or Direct mode.
+
+ riscv,num-sources:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 1023
+ description:
+ Specifies the number of wired interrupt sources supported by this
+ APLIC domain.
+
+ riscv,children:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 1024
+ items:
+ maxItems: 1
+ description:
+ A list of child APLIC domains for the given APLIC domain. Each child
+ APLIC domain is assigned a child index in increasing order, with the
+ first child APLIC domain assigned child index 0. The APLIC domain child
+ index is used by firmware to delegate interrupts from the given APLIC
+ domain to a particular child APLIC domain.
+
+ riscv,delegation:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 1024
+ items:
+ items:
+ - description: child APLIC domain phandle
+ - description: first interrupt number of the parent APLIC domain (inclusive)
+ - description: last interrupt number of the parent APLIC domain (inclusive)
+ description:
+ A interrupt delegation list where each entry is a triple consisting
+ of child APLIC domain phandle, first interrupt number of the parent
+ APLIC domain, and last interrupt number of the parent APLIC domain.
+ Firmware must configure interrupt delegation registers based on
+ interrupt delegation list.
+
+dependencies:
+ riscv,delegation: [ "riscv,children" ]
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - riscv,num-sources
+
+anyOf:
+ - required:
+ - interrupts-extended
+ - required:
+ - msi-parent
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ // Example 1 (APLIC domains directly injecting interrupt to HARTs):
+
+ interrupt-controller@c000000 {
+ compatible = "qemu,aplic", "riscv,aplic";
+ interrupts-extended = <&cpu1_intc 11>,
+ <&cpu2_intc 11>,
+ <&cpu3_intc 11>,
+ <&cpu4_intc 11>;
+ reg = <0xc000000 0x4080>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ riscv,num-sources = <63>;
+ riscv,children = <&aplic1>, <&aplic2>;
+ riscv,delegation = <&aplic1 1 63>;
+ };
+
+ aplic1: interrupt-controller@d000000 {
+ compatible = "qemu,aplic", "riscv,aplic";
+ interrupts-extended = <&cpu1_intc 9>,
+ <&cpu2_intc 9>;
+ reg = <0xd000000 0x4080>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ riscv,num-sources = <63>;
+ };
+
+ aplic2: interrupt-controller@e000000 {
+ compatible = "qemu,aplic", "riscv,aplic";
+ interrupts-extended = <&cpu3_intc 9>,
+ <&cpu4_intc 9>;
+ reg = <0xe000000 0x4080>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ riscv,num-sources = <63>;
+ };
+
+ - |
+ // Example 2 (APLIC domains forwarding interrupts as MSIs):
+
+ interrupt-controller@c000000 {
+ compatible = "qemu,aplic", "riscv,aplic";
+ msi-parent = <&imsic_mlevel>;
+ reg = <0xc000000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ riscv,num-sources = <63>;
+ riscv,children = <&aplic3>;
+ riscv,delegation = <&aplic3 1 63>;
+ };
+
+ aplic3: interrupt-controller@d000000 {
+ compatible = "qemu,aplic", "riscv,aplic";
+ msi-parent = <&imsic_slevel>;
+ reg = <0xd000000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ riscv,num-sources = <63>;
+ };
+...
diff --git a/dts/upstream/Bindings/interrupt-controller/riscv,imsics.yaml b/dts/upstream/Bindings/interrupt-controller/riscv,imsics.yaml
new file mode 100644
index 0000000..84976f1
--- /dev/null
+++ b/dts/upstream/Bindings/interrupt-controller/riscv,imsics.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsics.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Incoming MSI Controller (IMSIC)
+
+maintainers:
+ - Anup Patel <anup@brainfault.org>
+
+description: |
+ The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming
+ MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V
+ AIA specification can be found at https://github.com/riscv/riscv-aia.
+
+ The IMSIC is a per-CPU (or per-HART) device with separate interrupt file
+ for each privilege level (machine or supervisor). The configuration of
+ a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO
+ space to receive MSIs from devices. Each IMSIC interrupt file supports a
+ fixed number of interrupt identities (to distinguish MSIs from devices)
+ which is same for given privilege level across CPUs (or HARTs).
+
+ The device tree of a RISC-V platform will have one IMSIC device tree node
+ for each privilege level (machine or supervisor) which collectively describe
+ IMSIC interrupt files at that privilege level across CPUs (or HARTs).
+
+ The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform
+ follows a particular scheme defined by the RISC-V AIA specification. A IMSIC
+ group is a set of IMSIC interrupt files co-located in MMIO space and we can
+ have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a
+ RISC-V platform. The MSI target address of a IMSIC interrupt file at given
+ privilege level (machine or supervisor) encodes group index, HART index,
+ and guest index (shown below).
+
+ XLEN-1 > (HART Index MSB) 12 0
+ | | | |
+ -------------------------------------------------------------
+ |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index| 0 |
+ -------------------------------------------------------------
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qemu,imsics
+ - const: riscv,imsics
+
+ reg:
+ minItems: 1
+ maxItems: 16384
+ description:
+ Base address of each IMSIC group.
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 0
+
+ msi-controller: true
+
+ "#msi-cells":
+ const: 0
+
+ interrupts-extended:
+ minItems: 1
+ maxItems: 16384
+ description:
+ This property represents the set of CPUs (or HARTs) for which given
+ device tree node describes the IMSIC interrupt files. Each node pointed
+ to should be a riscv,cpu-intc node, which has a CPU node (i.e. RISC-V
+ HART) as parent.
+
+ riscv,num-ids:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 63
+ maximum: 2047
+ description:
+ Number of interrupt identities supported by IMSIC interrupt file.
+
+ riscv,num-guest-ids:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 63
+ maximum: 2047
+ description:
+ Number of interrupt identities are supported by IMSIC guest interrupt
+ file. When not specified it is assumed to be same as specified by the
+ riscv,num-ids property.
+
+ riscv,guest-index-bits:
+ minimum: 0
+ maximum: 7
+ default: 0
+ description:
+ Number of guest index bits in the MSI target address.
+
+ riscv,hart-index-bits:
+ minimum: 0
+ maximum: 15
+ description:
+ Number of HART index bits in the MSI target address. When not
+ specified it is calculated based on the interrupts-extended property.
+
+ riscv,group-index-bits:
+ minimum: 0
+ maximum: 7
+ default: 0
+ description:
+ Number of group index bits in the MSI target address.
+
+ riscv,group-index-shift:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 55
+ default: 24
+ description:
+ The least significant bit position of the group index bits in the
+ MSI target address.
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - msi-controller
+ - "#msi-cells"
+ - interrupts-extended
+ - riscv,num-ids
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ // Example 1 (Machine-level IMSIC files with just one group):
+
+ interrupt-controller@24000000 {
+ compatible = "qemu,imsics", "riscv,imsics";
+ interrupts-extended = <&cpu1_intc 11>,
+ <&cpu2_intc 11>,
+ <&cpu3_intc 11>,
+ <&cpu4_intc 11>;
+ reg = <0x28000000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ msi-controller;
+ #msi-cells = <0>;
+ riscv,num-ids = <127>;
+ };
+
+ - |
+ // Example 2 (Supervisor-level IMSIC files with two groups):
+
+ interrupt-controller@28000000 {
+ compatible = "qemu,imsics", "riscv,imsics";
+ interrupts-extended = <&cpu1_intc 9>,
+ <&cpu2_intc 9>,
+ <&cpu3_intc 9>,
+ <&cpu4_intc 9>;
+ reg = <0x28000000 0x2000>, /* Group0 IMSICs */
+ <0x29000000 0x2000>; /* Group1 IMSICs */
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ msi-controller;
+ #msi-cells = <0>;
+ riscv,num-ids = <127>;
+ riscv,group-index-bits = <1>;
+ riscv,group-index-shift = <24>;
+ };
+...
diff --git a/dts/upstream/Bindings/interrupt-controller/st,stm32-exti.yaml b/dts/upstream/Bindings/interrupt-controller/st,stm32-exti.yaml
index 00c10a8..9967e57 100644
--- a/dts/upstream/Bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/st,stm32-exti.yaml
@@ -89,8 +89,23 @@ examples:
reg = <0x5000d000 0x400>;
};
+ - |
//Example 2
- exti2: interrupt-controller@40013c00 {
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ exti2: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ interrupts-extended =
+ <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ - |
+ //Example 3
+ exti3: interrupt-controller@40013c00 {
compatible = "st,stm32-exti";
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/dts/upstream/Bindings/iommu/qcom,tbu.yaml b/dts/upstream/Bindings/iommu/qcom,tbu.yaml
new file mode 100644
index 0000000..82dfe93
--- /dev/null
+++ b/dts/upstream/Bindings/iommu/qcom,tbu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/qcom,tbu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TBU (Translation Buffer Unit)
+
+maintainers:
+ - Georgi Djakov <quic_c_gdjako@quicinc.com>
+
+description:
+ The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains
+ a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides
+ debug features to trace and trigger debug transactions. There are multiple TBU
+ instances with each client core.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7280-tbu
+ - qcom,sdm845-tbu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ qcom,stream-id-range:
+ description: |
+ Phandle of a SMMU device and Stream ID range (address and size) that
+ is assigned by the TBU
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle of a smmu node
+ - description: stream id base address
+ - description: stream id size
+
+required:
+ - compatible
+ - reg
+ - qcom,stream-id-range
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+ tbu@150e1000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x150e1000 0x1000>;
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+ };
+...
diff --git a/dts/upstream/Bindings/iommu/renesas,ipmmu-vmsa.yaml b/dts/upstream/Bindings/iommu/renesas,ipmmu-vmsa.yaml
index be90f68..0acaa2b 100644
--- a/dts/upstream/Bindings/iommu/renesas,ipmmu-vmsa.yaml
+++ b/dts/upstream/Bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -50,6 +50,7 @@ properties:
- renesas,ipmmu-r8a779a0 # R-Car V3U
- renesas,ipmmu-r8a779f0 # R-Car S4-8
- renesas,ipmmu-r8a779g0 # R-Car V4H
+ - renesas,ipmmu-r8a779h0 # R-Car V4M
- const: renesas,rcar-gen4-ipmmu-vmsa # R-Car Gen4
reg:
diff --git a/dts/upstream/Bindings/leds/leds-qcom-lpg.yaml b/dts/upstream/Bindings/leds/leds-qcom-lpg.yaml
index 54a428d..8b82c45 100644
--- a/dts/upstream/Bindings/leds/leds-qcom-lpg.yaml
+++ b/dts/upstream/Bindings/leds/leds-qcom-lpg.yaml
@@ -27,11 +27,16 @@ properties:
- qcom,pm8994-lpg
- qcom,pmc8180c-lpg
- qcom,pmi632-lpg
+ - qcom,pmi8950-pwm
- qcom,pmi8994-lpg
- qcom,pmi8998-lpg
- qcom,pmk8550-pwm
- items:
- enum:
+ - qcom,pm6150l-lpg
+ - const: qcom,pm8150l-lpg
+ - items:
+ - enum:
- qcom,pm8550-pwm
- const: qcom,pm8350c-pwm
@@ -142,6 +147,7 @@ allOf:
- qcom,pm8941-lpg
- qcom,pm8994-lpg
- qcom,pmc8180c-lpg
+ - qcom,pmi8950-pwm
- qcom,pmi8994-lpg
- qcom,pmi8998-lpg
- qcom,pmk8550-pwm
@@ -290,5 +296,3 @@ examples:
label = "blue";
};
};
-
-...
diff --git a/dts/upstream/Bindings/leds/nxp,pca963x.yaml b/dts/upstream/Bindings/leds/nxp,pca963x.yaml
new file mode 100644
index 0000000..938d0e4
--- /dev/null
+++ b/dts/upstream/Bindings/leds/nxp,pca963x.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca963x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA963x LED controllers
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+ The NXP PCA963x are I2C-controlled LED drivers optimized for
+ Red/Green/Blue/Amber (RGBA) color mixing applications. Each LED is
+ individually controllable and has its own PWM controller.
+
+ Datasheets are available at
+
+ - https://www.nxp.com/docs/en/data-sheet/PCA9632.pdf
+ - https://www.nxp.com/docs/en/data-sheet/PCA9633.pdf
+ - https://www.nxp.com/docs/en/data-sheet/PCA9634.pdf
+ - https://www.nxp.com/docs/en/data-sheet/PCA9635.pdf
+
+properties:
+ compatible:
+ enum:
+ - nxp,pca9632
+ - nxp,pca9633
+ - nxp,pca9634
+ - nxp,pca9635
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ nxp,hw-blink:
+ type: boolean
+ description:
+ Use hardware blinking instead of software blinking
+
+ nxp,inverted-out:
+ type: boolean
+ description:
+ Invert the polarity of the generated PWM.
+
+ nxp,period-scale:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ In some configurations, the chip blinks faster than expected. This
+ parameter provides a scaling ratio (fixed point, decimal divided by 1000)
+ to compensate, e.g. 1300=1.3x and 750=0.75x.
+
+ nxp,totem-pole:
+ type: boolean
+ description:
+ Use totem pole (push-pull) instead of open-drain (pca9632 defaults to
+ open-drain, newer chips to totem pole).
+
+patternProperties:
+ "^led@[0-9a-f]+$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+
+ required:
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nxp,pca9632
+ - nxp,pca9633
+ then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ maximum: 3
+ else:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ maximum: 7
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@62 {
+ compatible = "nxp,pca9632";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+ };
+
+...
diff --git a/dts/upstream/Bindings/leds/pca963x.txt b/dts/upstream/Bindings/leds/pca963x.txt
deleted file mode 100644
index 4eee414..0000000
--- a/dts/upstream/Bindings/leds/pca963x.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-LEDs connected to pca9632, pca9633 or pca9634
-
-Required properties:
-- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
-
-Optional properties:
-- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
- to open-drain, newer chips to totem pole)
-- nxp,hw-blink : use hardware blinking instead of software blinking
-- nxp,period-scale : In some configurations, the chip blinks faster than expected.
- This parameter provides a scaling ratio (fixed point, decimal divided
- by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
-- nxp,inverted-out: invert the polarity of the generated PWM
-
-Each led is represented as a sub-node of the nxp,pca963x device.
-
-LED sub-node properties:
-- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
-- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
- 0 to 7 in pca9634, or 0 to 15 in pca9635)
-- linux,default-trigger : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-
-pca9632: pca9632 {
- compatible = "nxp,pca9632";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x62>;
-
- red@0 {
- label = "red";
- reg = <0>;
- linux,default-trigger = "none";
- };
- green@1 {
- label = "green";
- reg = <1>;
- linux,default-trigger = "none";
- };
- blue@2 {
- label = "blue";
- reg = <2>;
- linux,default-trigger = "none";
- };
- unused@3 {
- label = "unused";
- reg = <3>;
- linux,default-trigger = "none";
- };
-};
diff --git a/dts/upstream/Bindings/mailbox/arm,mhuv3.yaml b/dts/upstream/Bindings/mailbox/arm,mhuv3.yaml
new file mode 100644
index 0000000..449b55a
--- /dev/null
+++ b/dts/upstream/Bindings/mailbox/arm,mhuv3.yaml
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhuv3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHUv3 Mailbox Controller
+
+maintainers:
+ - Sudeep Holla <sudeep.holla@arm.com>
+ - Cristian Marussi <cristian.marussi@arm.com>
+
+description: |
+ The Arm Message Handling Unit (MHU) Version 3 is a mailbox controller that
+ enables unidirectional communications with remote processors through various
+ possible transport protocols.
+ The controller can optionally support a varying number of extensions that, in
+ turn, enable different kinds of transport to be used for communication.
+ Number, type and characteristics of each supported extension can be discovered
+ dynamically at runtime.
+
+ Given the unidirectional nature of the controller, an MHUv3 mailbox controller
+ is composed of a MHU Sender (MHUS) containing a PostBox (PBX) block and a MHU
+ Receiver (MHUR) containing a MailBox (MBX) block, where
+
+ PBX is used to
+ - Configure the MHU
+ - Send Transfers to the Receiver
+ - Optionally receive acknowledgment of a Transfer from the Receiver
+
+ MBX is used to
+ - Configure the MHU
+ - Receive Transfers from the Sender
+ - Optionally acknowledge Transfers sent by the Sender
+
+ Both PBX and MBX need to be present and defined in the DT description if you
+ need to establish a bidirectional communication, since you will have to
+ acquire two distinct unidirectional channels, one for each block.
+
+ As a consequence both blocks needs to be represented separately and specified
+ as distinct DT nodes in order to properly describe their resources.
+
+ Note that, though, thanks to the runtime discoverability, there is no need to
+ identify the type of blocks with distinct compatibles.
+
+ Following are the MHUv3 possible extensions.
+
+ - Doorbell Extension (DBE): DBE defines a type of channel called a Doorbell
+ Channel (DBCH). DBCH enables a single bit Transfer to be sent from the
+ Sender to Receiver. The Transfer indicates that an event has occurred.
+ When DBE is implemented, the number of DBCHs that an implementation of the
+ MHU can support is between 1 and 128, numbered starting from 0 in ascending
+ order and discoverable at run-time.
+ Each DBCH contains 32 individual fields, referred to as flags, each of which
+ can be used independently. It is possible for the Sender to send multiple
+ Transfers at once using a single DBCH, so long as each Transfer uses
+ a different flag in the DBCH.
+ Optionally, data may be transmitted through an out-of-band shared memory
+ region, wherein the MHU Doorbell is used strictly as an interrupt generation
+ mechanism, but this is out of the scope of these bindings.
+
+ - FastChannel Extension (FCE): FCE defines a type of channel called a Fast
+ Channel (FCH). FCH is intended for lower overhead communication between
+ Sender and Receiver at the expense of determinism. An FCH allows the Sender
+ to update the channel value at any time, regardless of whether the previous
+ value has been seen by the Receiver. When the Receiver reads the channel's
+ content it gets the last value written to the channel.
+ FCH is considered lossy in nature, and means that the Sender has no way of
+ knowing if, or when, the Receiver will act on the Transfer.
+ FCHs are expected to behave as RAM which generates interrupts when writes
+ occur to the locations within the RAM.
+ When FCE is implemented, the number of FCHs that an implementation of the
+ MHU can support is between 1-1024, if the FastChannel word-size is 32-bits,
+ or between 1-512, when the FastChannel word-size is 64-bits.
+ FCHs are numbered from 0 in ascending order.
+ Note that the number of FCHs and the word-size are implementation defined,
+ not configurable but discoverable at run-time.
+ Optionally, data may be transmitted through an out-of-band shared memory
+ region, wherein the MHU FastChannel is used as an interrupt generation
+ mechanism which carries also a pointer to such out-of-band data, but this
+ is out of the scope of these bindings.
+
+ - FIFO Extension (FE): FE defines a Channel type called a FIFO Channel (FFCH).
+ FFCH allows a Sender to send
+ - Multiple Transfers to the Receiver without having to wait for the
+ previous Transfer to be acknowledged by the Receiver, as long as the
+ FIFO has room for the Transfer.
+ - Transfers which require the Receiver to provide acknowledgment.
+ - Transfers which have in-band payload.
+ In all cases, the data is guaranteed to be observed by the Receiver in the
+ same order which the Sender sent it.
+ When FE is implemented, the number of FFCHs that an implementation of the
+ MHU can support is between 1 and 64, numbered starting from 0 in ascending
+ order. The number of FFCHs, their depth (same for all implemented FFCHs) and
+ the access-granularity are implementation defined, not configurable but
+ discoverable at run-time.
+ Optionally, additional data may be transmitted through an out-of-band shared
+ memory region, wherein the MHU FIFO is used to transmit, in order, a small
+ part of the payload (like a header) and a reference to the shared memory
+ area holding the remaining, bigger, chunk of the payload, but this is out of
+ the scope of these bindings.
+
+properties:
+ compatible:
+ const: arm,mhuv3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 74
+
+ interrupt-names:
+ description: |
+ The MHUv3 controller generates a number of events some of which are used
+ to generate interrupts; as a consequence it can expose a varying number of
+ optional PBX/MBX interrupts, representing the events generated during the
+ operation of the various transport protocols associated with different
+ extensions. All interrupts of the MHU are level-sensitive.
+ Some of these optional interrupts are defined per-channel, where the
+ number of channels effectively available is implementation defined and
+ run-time discoverable.
+ In the following names are enumerated using patterns, with per-channel
+ interrupts implicitly capped at the maximum channels allowed by the
+ specification for each extension type.
+ For the sake of simplicity maxItems is anyway capped to a most plausible
+ number, assuming way less channels would be implemented than actually
+ possible.
+
+ The only mandatory interrupts on the MHU are:
+ - combined
+ - mbx-fch-xfer-<N> but only if mbx-fcgrp-xfer-<N> is not implemented.
+
+ minItems: 1
+ maxItems: 74
+ items:
+ oneOf:
+ - const: combined
+ description: PBX/MBX Combined interrupt
+ - const: combined-ffch
+ description: PBX/MBX FIFO Combined interrupt
+ - pattern: '^ffch-low-tide-[0-9]+$'
+ description: PBX/MBX FIFO Channel <N> Low Tide interrupt
+ - pattern: '^ffch-high-tide-[0-9]+$'
+ description: PBX/MBX FIFO Channel <N> High Tide interrupt
+ - pattern: '^ffch-flush-[0-9]+$'
+ description: PBX/MBX FIFO Channel <N> Flush interrupt
+ - pattern: '^mbx-dbch-xfer-[0-9]+$'
+ description: MBX Doorbell Channel <N> Transfer interrupt
+ - pattern: '^mbx-fch-xfer-[0-9]+$'
+ description: MBX FastChannel <N> Transfer interrupt
+ - pattern: '^mbx-fchgrp-xfer-[0-9]+$'
+ description: MBX FastChannel <N> Group Transfer interrupt
+ - pattern: '^mbx-ffch-xfer-[0-9]+$'
+ description: MBX FIFO Channel <N> Transfer interrupt
+ - pattern: '^pbx-dbch-xfer-ack-[0-9]+$'
+ description: PBX Doorbell Channel <N> Transfer Ack interrupt
+ - pattern: '^pbx-ffch-xfer-ack-[0-9]+$'
+ description: PBX FIFO Channel <N> Transfer Ack interrupt
+
+ '#mbox-cells':
+ description: |
+ The first argument in the consumers 'mboxes' property represents the
+ extension type, the second is for the channel number while the third
+ depends on extension type.
+
+ Extension types constants are defined in <dt-bindings/arm/mhuv3-dt.h>.
+
+ Extension type for DBE is DBE_EXT and the third parameter represents the
+ doorbell flag number to use.
+ Extension type for FCE is FCE_EXT, third parameter unused.
+ Extension type for FE is FE_EXT, third parameter unused.
+
+ mboxes = <&mhu DBE_EXT 0 5>; // DBE, Doorbell Channel Window 0, doorbell 5.
+ mboxes = <&mhu DBE_EXT 7>; // DBE, Doorbell Channel Window 1, doorbell 7.
+ mboxes = <&mhu FCE_EXT 0 0>; // FCE, FastChannel Window 0.
+ mboxes = <&mhu FCE_EXT 3 0>; // FCE, FastChannel Window 3.
+ mboxes = <&mhu FE_EXT 1 0>; // FE, FIFO Channel Window 1.
+ mboxes = <&mhu FE_EXT 7 0>; // FE, FIFO Channel Window 7.
+ const: 3
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mailbox@2aaa0000 {
+ compatible = "arm,mhuv3";
+ #mbox-cells = <3>;
+ reg = <0 0x2aaa0000 0 0x10000>;
+ clocks = <&clock 0>;
+ interrupt-names = "combined", "pbx-dbch-xfer-ack-1",
+ "ffch-high-tide-0";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mailbox@2ab00000 {
+ compatible = "arm,mhuv3";
+ #mbox-cells = <3>;
+ reg = <0 0x2aab0000 0 0x10000>;
+ clocks = <&clock 0>;
+ interrupt-names = "combined", "mbx-dbch-xfer-1", "ffch-low-tide-0";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/dts/upstream/Bindings/mailbox/qcom,apcs-kpss-global.yaml b/dts/upstream/Bindings/mailbox/qcom,apcs-kpss-global.yaml
index 79eb523..982c741 100644
--- a/dts/upstream/Bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/dts/upstream/Bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -30,6 +30,7 @@ properties:
- const: syscon
- items:
- enum:
+ - qcom,msm8974-apcs-kpss-global
- qcom,msm8976-apcs-kpss-global
- const: qcom,msm8994-apcs-kpss-global
- const: syscon
diff --git a/dts/upstream/Bindings/mailbox/qcom-ipcc.yaml b/dts/upstream/Bindings/mailbox/qcom-ipcc.yaml
index 8f00486..05e4e1d 100644
--- a/dts/upstream/Bindings/mailbox/qcom-ipcc.yaml
+++ b/dts/upstream/Bindings/mailbox/qcom-ipcc.yaml
@@ -28,6 +28,7 @@ properties:
- qcom,sa8775p-ipcc
- qcom,sc7280-ipcc
- qcom,sc8280xp-ipcc
+ - qcom,sdx75-ipcc
- qcom,sm6350-ipcc
- qcom,sm6375-ipcc
- qcom,sm8250-ipcc
diff --git a/dts/upstream/Bindings/media/amphion,vpu.yaml b/dts/upstream/Bindings/media/amphion,vpu.yaml
index c0d83d7..9801de3 100644
--- a/dts/upstream/Bindings/media/amphion,vpu.yaml
+++ b/dts/upstream/Bindings/media/amphion,vpu.yaml
@@ -44,7 +44,7 @@ patternProperties:
description:
Each vpu encoder or decoder correspond a MU, which used for communication
between driver and firmware. Implement via mailbox on driver.
- $ref: ../mailbox/fsl,mu.yaml#
+ $ref: /schemas/mailbox/fsl,mu.yaml#
"^vpu-core@[0-9a-f]+$":
diff --git a/dts/upstream/Bindings/media/brcm,bcm2835-unicam.yaml b/dts/upstream/Bindings/media/brcm,bcm2835-unicam.yaml
new file mode 100644
index 0000000..5fb5d60
--- /dev/null
+++ b/dts/upstream/Bindings/media/brcm,bcm2835-unicam.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM283x Camera Interface (Unicam)
+
+maintainers:
+ - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description: |-
+ The Unicam block on BCM283x SoCs is the receiver for either
+ CSI-2 or CCP2 data from image sensors or similar devices.
+
+ The main platform using this SoC is the Raspberry Pi family of boards. On
+ the Pi the VideoCore firmware can also control this hardware block, and
+ driving it from two different processors will cause issues. To avoid this,
+ the firmware checks the device tree configuration during boot. If it finds
+ device tree nodes whose name starts with 'csi' then it will stop the firmware
+ accessing the block, and it can then safely be used via the device tree
+ binding.
+
+properties:
+ compatible:
+ const: brcm,bcm2835-unicam
+
+ reg:
+ items:
+ - description: Unicam block.
+ - description: Clock Manager Image (CMI) block.
+
+ reg-names:
+ items:
+ - const: unicam
+ - const: cmi
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Clock to drive the LP state machine of Unicam.
+ - description: Clock for the VPU (core clock).
+
+ clock-names:
+ items:
+ - const: lp
+ - const: vpu
+
+ power-domains:
+ items:
+ - description: Unicam power domain
+
+ brcm,num-data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 2, 4 ]
+ description: |
+ Number of CSI-2 data lanes supported by this Unicam instance. The number
+ of data lanes actively used is specified with the data-lanes endpoint
+ property.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ additionalProperties: false
+
+ properties:
+ bus-type:
+ enum: [ 3, 4 ]
+
+ clock-noncontinuous: true
+ data-lanes: true
+ remote-endpoint: true
+
+ required:
+ - bus-type
+ - data-lanes
+ - remote-endpoint
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - brcm,num-data-lanes
+ - port
+
+additionalProperties: False
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/media/video-interfaces.h>
+ #include <dt-bindings/power/raspberrypi-power.h>
+
+ csi1: csi@7e801000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e801000 0x800>,
+ <0x7e802004 0x4>;
+ reg-names = "unicam", "cmi";
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clocks BCM2835_CLOCK_CAM1>,
+ <&firmware_clocks 4>;
+ clock-names = "lp", "vpu";
+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+ brcm,num-data-lanes = <2>;
+ port {
+ csi1_ep: endpoint {
+ remote-endpoint = <&imx219_0>;
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/media/cec/st,stm32-cec.yaml b/dts/upstream/Bindings/media/cec/st,stm32-cec.yaml
index 2314a9a..1d930d9 100644
--- a/dts/upstream/Bindings/media/cec/st,stm32-cec.yaml
+++ b/dts/upstream/Bindings/media/cec/st,stm32-cec.yaml
@@ -29,6 +29,10 @@ properties:
- const: cec
- const: hdmi-cec
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/media/i2c/galaxycore,gc0308.yaml b/dts/upstream/Bindings/media/i2c/galaxycore,gc0308.yaml
index f81e7da..2bf1a81 100644
--- a/dts/upstream/Bindings/media/i2c/galaxycore,gc0308.yaml
+++ b/dts/upstream/Bindings/media/i2c/galaxycore,gc0308.yaml
@@ -15,7 +15,7 @@ description: |
They include an ISP capable of auto exposure and auto white balance.
allOf:
- - $ref: ../video-interface-devices.yaml#
+ - $ref: /schemas/media/video-interface-devices.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/media/i2c/galaxycore,gc2145.yaml b/dts/upstream/Bindings/media/i2c/galaxycore,gc2145.yaml
index 1726ecc..9eac588 100644
--- a/dts/upstream/Bindings/media/i2c/galaxycore,gc2145.yaml
+++ b/dts/upstream/Bindings/media/i2c/galaxycore,gc2145.yaml
@@ -19,7 +19,7 @@ description:
either through a parallel interface or through MIPI CSI-2.
allOf:
- - $ref: ../video-interface-devices.yaml#
+ - $ref: /schemas/media/video-interface-devices.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/media/i2c/ovti,ov2680.yaml b/dts/upstream/Bindings/media/i2c/ovti,ov2680.yaml
index cf456f8..634d3b8 100644
--- a/dts/upstream/Bindings/media/i2c/ovti,ov2680.yaml
+++ b/dts/upstream/Bindings/media/i2c/ovti,ov2680.yaml
@@ -37,31 +37,45 @@ properties:
active low.
maxItems: 1
- dovdd-supply:
+ DOVDD-supply:
description:
Definition of the regulator used as interface power supply.
- avdd-supply:
+ AVDD-supply:
description:
Definition of the regulator used as analog power supply.
- dvdd-supply:
+ DVDD-supply:
description:
Definition of the regulator used as digital power supply.
port:
- $ref: /schemas/graph.yaml#/properties/port
description:
A node containing an output port node.
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ additionalProperties: false
+
+ properties:
+ link-frequencies: true
+
+ remote-endpoint: true
+
+ required:
+ - link-frequencies
required:
- compatible
- reg
- clocks
- clock-names
- - dovdd-supply
- - avdd-supply
- - dvdd-supply
+ - DOVDD-supply
+ - AVDD-supply
+ - DVDD-supply
- reset-gpios
- port
@@ -82,13 +96,14 @@ examples:
clock-names = "xvclk";
reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- dovdd-supply = <&sw2_reg>;
- dvdd-supply = <&sw2_reg>;
- avdd-supply = <&reg_peri_3p15v>;
+ DOVDD-supply = <&sw2_reg>;
+ DVDD-supply = <&sw2_reg>;
+ AVDD-supply = <&reg_peri_3p15v>;
port {
ov2680_to_mipi: endpoint {
remote-endpoint = <&mipi_from_sensor>;
+ link-frequencies = /bits/ 64 <330000000>;
};
};
};
diff --git a/dts/upstream/Bindings/media/i2c/ov8856.yaml b/dts/upstream/Bindings/media/i2c/ovti,ov8856.yaml
index 816dac9..3f6f72c 100644
--- a/dts/upstream/Bindings/media/i2c/ov8856.yaml
+++ b/dts/upstream/Bindings/media/i2c/ovti,ov8856.yaml
@@ -2,7 +2,7 @@
# Copyright (c) 2019 MediaTek Inc.
%YAML 1.2
---
-$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8856.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Omnivision OV8856 CMOS Sensor
diff --git a/dts/upstream/Bindings/media/i2c/sony,imx214.yaml b/dts/upstream/Bindings/media/i2c/sony,imx214.yaml
index 60903da..0162eec 100644
--- a/dts/upstream/Bindings/media/i2c/sony,imx214.yaml
+++ b/dts/upstream/Bindings/media/i2c/sony,imx214.yaml
@@ -16,7 +16,7 @@ description: |
maximum throughput of 1.2Gbps/lane.
allOf:
- - $ref: ../video-interface-devices.yaml#
+ - $ref: /schemas/media/video-interface-devices.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/media/i2c/sony,imx290.yaml b/dts/upstream/Bindings/media/i2c/sony,imx290.yaml
index a531bad..bf05ca4 100644
--- a/dts/upstream/Bindings/media/i2c/sony,imx290.yaml
+++ b/dts/upstream/Bindings/media/i2c/sony,imx290.yaml
@@ -23,6 +23,9 @@ description: |-
is treated the same as this as it was the original compatible string.
imx290llr is the mono version of the sensor.
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
properties:
compatible:
oneOf:
@@ -101,7 +104,7 @@ required:
- vdddo-supply
- port
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/dts/upstream/Bindings/media/i2c/sony,imx415.yaml b/dts/upstream/Bindings/media/i2c/sony,imx415.yaml
index 9a00dab..34962c5 100644
--- a/dts/upstream/Bindings/media/i2c/sony,imx415.yaml
+++ b/dts/upstream/Bindings/media/i2c/sony,imx415.yaml
@@ -18,7 +18,7 @@ description: |-
available via CSI-2 serial data output (two or four lanes).
allOf:
- - $ref: ../video-interface-devices.yaml#
+ - $ref: /schemas/media/video-interface-devices.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/media/nxp,imx8-isi.yaml b/dts/upstream/Bindings/media/nxp,imx8-isi.yaml
index e466546..4d5348d4 100644
--- a/dts/upstream/Bindings/media/nxp,imx8-isi.yaml
+++ b/dts/upstream/Bindings/media/nxp,imx8-isi.yaml
@@ -84,6 +84,7 @@ allOf:
properties:
port@0:
description: MIPI CSI-2 RX
+ port@1: false
required:
- port@0
diff --git a/dts/upstream/Bindings/media/nxp,imx8-jpeg.yaml b/dts/upstream/Bindings/media/nxp,imx8-jpeg.yaml
index 3d9d1db..2be30c5 100644
--- a/dts/upstream/Bindings/media/nxp,imx8-jpeg.yaml
+++ b/dts/upstream/Bindings/media/nxp,imx8-jpeg.yaml
@@ -31,6 +31,11 @@ properties:
reg:
maxItems: 1
+ clocks:
+ items:
+ - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per)
+ - description: IP bus clock for register access (ipg)
+
interrupts:
description: |
There are 4 slots available in the IP, which the driver may use
@@ -49,6 +54,7 @@ properties:
required:
- compatible
- reg
+ - clocks
- interrupts
- power-domains
@@ -56,12 +62,15 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/clock/imx8-lpcg.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/firmware/imx/rsrc.h>
jpegdec: jpegdec@58400000 {
compatible = "nxp,imx8qxp-jpgdec";
reg = <0x58400000 0x00050000 >;
+ clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+ <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
@@ -76,6 +85,8 @@ examples:
jpegenc: jpegenc@58450000 {
compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
reg = <0x58450000 0x00050000 >;
+ clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+ <&img_jpeg__lpcg IMX_LPCG_CLK_4>;
interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/Bindings/media/qcom,sc8280xp-camss.yaml b/dts/upstream/Bindings/media/qcom,sc8280xp-camss.yaml
new file mode 100644
index 0000000..c0bc317
--- /dev/null
+++ b/dts/upstream/Bindings/media/qcom,sc8280xp-camss.yaml
@@ -0,0 +1,512 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc8280xp-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Camera Subsystem (CAMSS)
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-camss
+
+ clocks:
+ maxItems: 40
+
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: cpas_ahb
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: csiphy3
+ - const: csiphy3_timer
+ - const: vfe0_axi
+ - const: vfe0
+ - const: vfe0_cphy_rx
+ - const: vfe0_csid
+ - const: vfe1_axi
+ - const: vfe1
+ - const: vfe1_cphy_rx
+ - const: vfe1_csid
+ - const: vfe2_axi
+ - const: vfe2
+ - const: vfe2_cphy_rx
+ - const: vfe2_csid
+ - const: vfe3_axi
+ - const: vfe3
+ - const: vfe3_cphy_rx
+ - const: vfe3_csid
+ - const: vfe_lite0
+ - const: vfe_lite0_cphy_rx
+ - const: vfe_lite0_csid
+ - const: vfe_lite1
+ - const: vfe_lite1_cphy_rx
+ - const: vfe_lite1_csid
+ - const: vfe_lite2
+ - const: vfe_lite2_cphy_rx
+ - const: vfe_lite2_csid
+ - const: vfe_lite3
+ - const: vfe_lite3_cphy_rx
+ - const: vfe_lite3_csid
+ - const: gcc_axi_hf
+ - const: gcc_axi_sf
+
+ interrupts:
+ maxItems: 20
+
+ interrupt-names:
+ items:
+ - const: csid1_lite
+ - const: vfe_lite1
+ - const: csiphy3
+ - const: csid0
+ - const: vfe0
+ - const: csid1
+ - const: vfe1
+ - const: csid0_lite
+ - const: vfe_lite0
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csid2
+ - const: vfe2
+ - const: csid3_lite
+ - const: csid2_lite
+ - const: vfe_lite3
+ - const: vfe_lite2
+ - const: csid3
+ - const: vfe3
+
+ iommus:
+ maxItems: 16
+
+ interconnects:
+ maxItems: 4
+
+ interconnect-names:
+ items:
+ - const: cam_ahb
+ - const: cam_hf_mnoc
+ - const: cam_sf_mnoc
+ - const: cam_sf_icp_mnoc
+
+ power-domains:
+ items:
+ - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE3 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+ power-domain-names:
+ items:
+ - const: ife0
+ - const: ife1
+ - const: ife2
+ - const: ife3
+ - const: top
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY0.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY1.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY2.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY3.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ reg:
+ maxItems: 20
+
+ reg-names:
+ items:
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy0
+ - const: csiphy1
+ - const: vfe0
+ - const: csid0
+ - const: vfe1
+ - const: csid1
+ - const: vfe2
+ - const: csid2
+ - const: vfe_lite0
+ - const: csid0_lite
+ - const: vfe_lite1
+ - const: csid1_lite
+ - const: vfe_lite2
+ - const: csid2_lite
+ - const: vfe_lite3
+ - const: csid3_lite
+ - const: vfe3
+ - const: csid3
+
+ vdda-phy-supply:
+ description:
+ Phandle to a regulator supply to PHY core block.
+
+ vdda-pll-supply:
+ description:
+ Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interconnects
+ - interconnect-names
+ - interrupts
+ - interrupt-names
+ - iommus
+ - power-domains
+ - power-domain-names
+ - reg
+ - reg-names
+ - vdda-phy-supply
+ - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camss: camss@ac5a000 {
+ compatible = "qcom,sc8280xp-camss";
+
+ reg = <0 0x0ac5a000 0 0x2000>,
+ <0 0x0ac5c000 0 0x2000>,
+ <0 0x0ac65000 0 0x2000>,
+ <0 0x0ac67000 0 0x2000>,
+ <0 0x0acaf000 0 0x4000>,
+ <0 0x0acb3000 0 0x1000>,
+ <0 0x0acb6000 0 0x4000>,
+ <0 0x0acba000 0 0x1000>,
+ <0 0x0acbd000 0 0x4000>,
+ <0 0x0acc1000 0 0x1000>,
+ <0 0x0acc4000 0 0x4000>,
+ <0 0x0acc8000 0 0x1000>,
+ <0 0x0accb000 0 0x4000>,
+ <0 0x0accf000 0 0x1000>,
+ <0 0x0acd2000 0 0x4000>,
+ <0 0x0acd6000 0 0x1000>,
+ <0 0x0acd9000 0 0x4000>,
+ <0 0x0acdd000 0 0x1000>,
+ <0 0x0ace0000 0 0x4000>,
+ <0 0x0ace4000 0 0x1000>;
+
+ reg-names = "csiphy2",
+ "csiphy3",
+ "csiphy0",
+ "csiphy1",
+ "vfe0",
+ "csid0",
+ "vfe1",
+ "csid1",
+ "vfe2",
+ "csid2",
+ "vfe_lite0",
+ "csid0_lite",
+ "vfe_lite1",
+ "csid1_lite",
+ "vfe_lite2",
+ "csid2_lite",
+ "vfe_lite3",
+ "csid3_lite",
+ "vfe3",
+ "csid3";
+
+ vdda-phy-supply = <&vreg_l6d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "csid1_lite",
+ "vfe_lite1",
+ "csiphy3",
+ "csid0",
+ "vfe0",
+ "csid1",
+ "vfe1",
+ "csid0_lite",
+ "vfe_lite0",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid2",
+ "vfe2",
+ "csid3_lite",
+ "csid2_lite",
+ "vfe_lite3",
+ "vfe_lite2",
+ "csid3",
+ "vfe3";
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc IFE_2_GDSC>,
+ <&camcc IFE_3_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "ife3",
+ "top";
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CSIPHY0_CLK>,
+ <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY1_CLK>,
+ <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY2_CLK>,
+ <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY3_CLK>,
+ <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+ <&camcc CAMCC_IFE_0_AXI_CLK>,
+ <&camcc CAMCC_IFE_0_CLK>,
+ <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_1_AXI_CLK>,
+ <&camcc CAMCC_IFE_1_CLK>,
+ <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_2_AXI_CLK>,
+ <&camcc CAMCC_IFE_2_CLK>,
+ <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_3_AXI_CLK>,
+ <&camcc CAMCC_IFE_3_CLK>,
+ <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_3_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>;
+
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe2_axi",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe2_csid",
+ "vfe3_axi",
+ "vfe3",
+ "vfe3_cphy_rx",
+ "vfe3_csid",
+ "vfe_lite0",
+ "vfe_lite0_cphy_rx",
+ "vfe_lite0_csid",
+ "vfe_lite1",
+ "vfe_lite1_cphy_rx",
+ "vfe_lite1_csid",
+ "vfe_lite2",
+ "vfe_lite2_cphy_rx",
+ "vfe_lite2_csid",
+ "vfe_lite3",
+ "vfe_lite3_cphy_rx",
+ "vfe_lite3_csid",
+ "gcc_axi_hf",
+ "gcc_axi_sf";
+
+
+ iommus = <&apps_smmu 0x2000 0x4e0>,
+ <&apps_smmu 0x2020 0x4e0>,
+ <&apps_smmu 0x2040 0x4e0>,
+ <&apps_smmu 0x2060 0x4e0>,
+ <&apps_smmu 0x2080 0x4e0>,
+ <&apps_smmu 0x20e0 0x4e0>,
+ <&apps_smmu 0x20c0 0x4e0>,
+ <&apps_smmu 0x20a0 0x4e0>,
+ <&apps_smmu 0x2400 0x4e0>,
+ <&apps_smmu 0x2420 0x4e0>,
+ <&apps_smmu 0x2440 0x4e0>,
+ <&apps_smmu 0x2460 0x4e0>,
+ <&apps_smmu 0x2480 0x4e0>,
+ <&apps_smmu 0x24e0 0x4e0>,
+ <&apps_smmu 0x24c0 0x4e0>,
+ <&apps_smmu 0x24a0 0x4e0>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_mnoc",
+ "cam_sf_mnoc",
+ "cam_sf_icp_mnoc";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csiphy_ep0: endpoint@0 {
+ reg = <0>;
+ clock-lanes = <7>;
+ data-lanes = <0 1>;
+ remote-endpoint = <&sensor_ep>;
+ };
+ };
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/media/st,stm32-dcmi.yaml b/dts/upstream/Bindings/media/st,stm32-dcmi.yaml
index 6b3e413..34147127 100644
--- a/dts/upstream/Bindings/media/st,stm32-dcmi.yaml
+++ b/dts/upstream/Bindings/media/st,stm32-dcmi.yaml
@@ -36,6 +36,10 @@ properties:
resets:
maxItems: 1
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
port:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/media/st,stm32mp25-video-codec.yaml b/dts/upstream/Bindings/media/st,stm32mp25-video-codec.yaml
index b8611bc..73726c6 100644
--- a/dts/upstream/Bindings/media/st,stm32mp25-video-codec.yaml
+++ b/dts/upstream/Bindings/media/st,stm32mp25-video-codec.yaml
@@ -30,6 +30,10 @@ properties:
clocks:
maxItems: 1
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/memory-controllers/samsung,s5pv210-dmc.yaml b/dts/upstream/Bindings/memory-controllers/samsung,s5pv210-dmc.yaml
new file mode 100644
index 0000000..c0e4705
--- /dev/null
+++ b/dts/upstream/Bindings/memory-controllers/samsung,s5pv210-dmc.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,s5pv210-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC Dynamic Memory Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+ Dynamic Memory Controller interfaces external JEDEC DDR-type SDRAM.
+
+properties:
+ compatible:
+ const: samsung,s5pv210-dmc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ memory-controller@f0000000 {
+ compatible = "samsung,s5pv210-dmc";
+ reg = <0xf0000000 0x1000>;
+ };
diff --git a/dts/upstream/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/dts/upstream/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 84ac6f5..706e45e 100644
--- a/dts/upstream/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/dts/upstream/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -50,6 +50,10 @@ properties:
Reflects the memory layout with four integer values per bank. Format:
<bank-number> 0 <address of the bank> <size>
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
patternProperties:
"^.*@[0-4],[a-f0-9]+$":
additionalProperties: true
diff --git a/dts/upstream/Bindings/mfd/actions,atc260x.yaml b/dts/upstream/Bindings/mfd/actions,atc260x.yaml
index 6811246..9ae4197 100644
--- a/dts/upstream/Bindings/mfd/actions,atc260x.yaml
+++ b/dts/upstream/Bindings/mfd/actions,atc260x.yaml
@@ -21,7 +21,7 @@ description: |
regulators.
allOf:
- - $ref: ../input/input.yaml
+ - $ref: /schemas/input/input.yaml
properties:
compatible:
@@ -57,7 +57,7 @@ properties:
switchldo1:
type: object
- $ref: ../regulator/regulator.yaml
+ $ref: /schemas/regulator/regulator.yaml
properties:
regulator-name: true
@@ -76,7 +76,7 @@ properties:
"^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
type: object
- $ref: ../regulator/regulator.yaml
+ $ref: /schemas/regulator/regulator.yaml
properties:
regulator-name: true
diff --git a/dts/upstream/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/dts/upstream/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index 8789e36..ca0e9f1 100644
--- a/dts/upstream/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/dts/upstream/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -20,7 +20,7 @@ properties:
maxItems: 1
patternProperties:
- "^.*_(clk|rst)$":
+ "^.*-(clk|rst)$":
type: object
unevaluatedProperties: false
@@ -171,7 +171,7 @@ examples:
compatible = "allwinner,sun6i-a31-prcm";
reg = <0x01f01400 0x200>;
- ar100: ar100_clk {
+ ar100: ar100-clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
clocks = <&rtc 0>, <&osc24M>,
@@ -180,7 +180,7 @@ examples:
clock-output-names = "ar100";
};
- ahb0: ahb0_clk {
+ ahb0: ahb0-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -189,14 +189,14 @@ examples:
clock-output-names = "ahb0";
};
- apb0: apb0_clk {
+ apb0: apb0-clk {
compatible = "allwinner,sun6i-a31-apb0-clk";
#clock-cells = <0>;
clocks = <&ahb0>;
clock-output-names = "apb0";
};
- apb0_gates: apb0_gates_clk {
+ apb0_gates: apb0-gates-clk {
compatible = "allwinner,sun6i-a31-apb0-gates-clk";
#clock-cells = <1>;
clocks = <&apb0>;
@@ -206,14 +206,14 @@ examples:
"apb0_i2c";
};
- ir_clk: ir_clk {
+ ir_clk: ir-clk {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&rtc 0>, <&osc24M>;
clock-output-names = "ir";
};
- apb0_rst: apb0_rst {
+ apb0_rst: apb0-rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
diff --git a/dts/upstream/Bindings/mfd/aspeed,ast2x00-scu.yaml b/dts/upstream/Bindings/mfd/aspeed,ast2x00-scu.yaml
index 1689b98..86ee69c 100644
--- a/dts/upstream/Bindings/mfd/aspeed,ast2x00-scu.yaml
+++ b/dts/upstream/Bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -47,10 +47,18 @@ patternProperties:
type: object
'^pinctrl(@[0-9a-f]+)?$':
- oneOf:
- - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml
- - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml
- - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ contains:
+ enum:
+ - aspeed,ast2400-pinctrl
+ - aspeed,ast2500-pinctrl
+ - aspeed,ast2600-pinctrl
+
+ required:
+ - compatible
'^interrupt-controller@[0-9a-f]+$':
description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
diff --git a/dts/upstream/Bindings/mfd/brcm,cru.yaml b/dts/upstream/Bindings/mfd/brcm,cru.yaml
index b85819f..04910e4 100644
--- a/dts/upstream/Bindings/mfd/brcm,cru.yaml
+++ b/dts/upstream/Bindings/mfd/brcm,cru.yaml
@@ -34,19 +34,19 @@ properties:
patternProperties:
'^clock-controller@[a-f0-9]+$':
- $ref: ../clock/brcm,iproc-clocks.yaml
+ $ref: /schemas/clock/brcm,iproc-clocks.yaml
'^phy@[a-f0-9]+$':
- $ref: ../phy/bcm-ns-usb2-phy.yaml
+ $ref: /schemas/phy/bcm-ns-usb2-phy.yaml
'^pinctrl@[a-f0-9]+$':
- $ref: ../pinctrl/brcm,ns-pinmux.yaml
+ $ref: /schemas/pinctrl/brcm,ns-pinmux.yaml
'^syscon@[a-f0-9]+$':
$ref: syscon.yaml
'^thermal@[a-f0-9]+$':
- $ref: ../thermal/brcm,ns-thermal.yaml
+ $ref: /schemas/thermal/brcm,ns-thermal.yaml
additionalProperties: false
diff --git a/dts/upstream/Bindings/mfd/brcm,iproc-cdru.txt b/dts/upstream/Bindings/mfd/brcm,iproc-cdru.txt
deleted file mode 100644
index 82f82e0..0000000
--- a/dts/upstream/Bindings/mfd/brcm,iproc-cdru.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Broadcom iProc Chip Device Resource Unit (CDRU)
-
-Various Broadcom iProc SoCs have a set of registers that provide various
-chip specific device and resource configurations. This node allows access to
-these CDRU registers via syscon.
-
-Required properties:
-- compatible: should contain:
- "brcm,sr-cdru", "syscon" for Stingray
-- reg: base address and range of the CDRU registers
-
-Example:
- cdru: syscon@6641d000 {
- compatible = "brcm,sr-cdru", "syscon";
- reg = <0 0x6641d000 0 0x400>;
- };
diff --git a/dts/upstream/Bindings/mfd/brcm,iproc-mhb.txt b/dts/upstream/Bindings/mfd/brcm,iproc-mhb.txt
deleted file mode 100644
index 4421e97..0000000
--- a/dts/upstream/Bindings/mfd/brcm,iproc-mhb.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Broadcom iProc Multi Host Bridge (MHB)
-
-Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
-the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
-interface; 3) access to the Nitro (network processing) engine
-
-This node allows access to these MHB registers via syscon.
-
-Required properties:
-- compatible: should contain:
- "brcm,sr-mhb", "syscon" for Stingray
-- reg: base address and range of the MHB registers
-
-Example:
- mhb: syscon@60401000 {
- compatible = "brcm,sr-mhb", "syscon";
- reg = <0 0x60401000 0 0x38c>;
- };
diff --git a/dts/upstream/Bindings/mfd/brcm,misc.yaml b/dts/upstream/Bindings/mfd/brcm,misc.yaml
index cff7d77..abe2452 100644
--- a/dts/upstream/Bindings/mfd/brcm,misc.yaml
+++ b/dts/upstream/Bindings/mfd/brcm,misc.yaml
@@ -33,7 +33,7 @@ properties:
patternProperties:
'^reset-controller@[a-f0-9]+$':
- $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml
+ $ref: /schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml
additionalProperties: false
diff --git a/dts/upstream/Bindings/mfd/canaan,k210-sysctl.yaml b/dts/upstream/Bindings/mfd/canaan,k210-sysctl.yaml
index 3b3beab..2451d0f 100644
--- a/dts/upstream/Bindings/mfd/canaan,k210-sysctl.yaml
+++ b/dts/upstream/Bindings/mfd/canaan,k210-sysctl.yaml
@@ -36,7 +36,7 @@ properties:
clock-controller:
# Child node
type: object
- $ref: ../clock/canaan,k210-clk.yaml
+ $ref: /schemas/clock/canaan,k210-clk.yaml
description:
Clock controller for the SoC clocks. This child node definition
should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
reset-controller:
# Child node
type: object
- $ref: ../reset/canaan,k210-rst.yaml
+ $ref: /schemas/reset/canaan,k210-rst.yaml
description:
Reset controller for the SoC. This child node definition
should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
syscon-reboot:
# Child node
type: object
- $ref: ../power/reset/syscon-reboot.yaml
+ $ref: /schemas/power/reset/syscon-reboot.yaml
description:
Reboot method for the SoC. This child node definition
should follow the bindings specified in
diff --git a/dts/upstream/Bindings/mfd/delta,tn48m-cpld.yaml b/dts/upstream/Bindings/mfd/delta,tn48m-cpld.yaml
index f6967c1..d3b7914 100644
--- a/dts/upstream/Bindings/mfd/delta,tn48m-cpld.yaml
+++ b/dts/upstream/Bindings/mfd/delta,tn48m-cpld.yaml
@@ -42,10 +42,10 @@ required:
patternProperties:
"^gpio(@[0-9a-f]+)?$":
- $ref: ../gpio/delta,tn48m-gpio.yaml
+ $ref: /schemas/gpio/delta,tn48m-gpio.yaml
"^reset-controller?$":
- $ref: ../reset/delta,tn48m-reset.yaml
+ $ref: /schemas/reset/delta,tn48m-reset.yaml
additionalProperties: false
diff --git a/dts/upstream/Bindings/mfd/iqs62x.yaml b/dts/upstream/Bindings/mfd/iqs62x.yaml
index f438c23..e79ce44 100644
--- a/dts/upstream/Bindings/mfd/iqs62x.yaml
+++ b/dts/upstream/Bindings/mfd/iqs62x.yaml
@@ -38,10 +38,10 @@ properties:
device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A).
keys:
- $ref: ../input/iqs62x-keys.yaml
+ $ref: /schemas/input/iqs62x-keys.yaml
pwm:
- $ref: ../pwm/iqs620a-pwm.yaml
+ $ref: /schemas/pwm/iqs620a-pwm.yaml
required:
- compatible
diff --git a/dts/upstream/Bindings/mfd/kontron,sl28cpld.yaml b/dts/upstream/Bindings/mfd/kontron,sl28cpld.yaml
index eb3b435..37207a9 100644
--- a/dts/upstream/Bindings/mfd/kontron,sl28cpld.yaml
+++ b/dts/upstream/Bindings/mfd/kontron,sl28cpld.yaml
@@ -39,19 +39,19 @@ properties:
patternProperties:
"^gpio(@[0-9a-f]+)?$":
- $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+ $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml
"^hwmon(@[0-9a-f]+)?$":
- $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+ $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml
"^interrupt-controller(@[0-9a-f]+)?$":
- $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+ $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml
"^pwm(@[0-9a-f]+)?$":
- $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+ $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml
"^watchdog(@[0-9a-f]+)?$":
- $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+ $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml
required:
- "#address-cells"
diff --git a/dts/upstream/Bindings/mfd/lp873x.txt b/dts/upstream/Bindings/mfd/lp873x.txt
deleted file mode 100644
index ae9cf39..0000000
--- a/dts/upstream/Bindings/mfd/lp873x.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-TI LP873X PMIC MFD driver
-
-Required properties:
- - compatible: "ti,lp8732", "ti,lp8733"
- - reg: I2C slave address.
- - gpio-controller: Marks the device node as a GPIO Controller.
- - #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify flags.
- See ../gpio/gpio.txt for more information.
- - xxx-in-supply: Phandle to parent supply node of each regulator
- populated under regulators node. xxx can be
- buck0, buck1, ldo0 or ldo1.
- - regulators: List of child nodes that specify the regulator
- initialization data.
-Example:
-
-pmic: lp8733@60 {
- compatible = "ti,lp8733";
- reg = <0x60>;
- gpio-controller;
- #gpio-cells = <2>;
-
- buck0-in-supply = <&vsys_3v3>;
- buck1-in-supply = <&vsys_3v3>;
- ldo0-in-supply = <&vsys_3v3>;
- ldo1-in-supply = <&vsys_3v3>;
-
- regulators {
- lp8733_buck0: buck0 {
- regulator-name = "lp8733-buck0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-min-microamp = <1500000>;
- regulator-max-microamp = <4000000>;
- regulator-ramp-delay = <10000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- lp8733_buck1: buck1 {
- regulator-name = "lp8733-buck1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-min-microamp = <1500000>;
- regulator-max-microamp = <4000000>;
- regulator-ramp-delay = <10000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- lp8733_ldo0: ldo0 {
- regulator-name = "lp8733-ldo0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- lp8733_ldo1: ldo1 {
- regulator-name = "lp8733-ldo1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
-};
diff --git a/dts/upstream/Bindings/mfd/max77650.yaml b/dts/upstream/Bindings/mfd/max77650.yaml
index 4181174..d93d841 100644
--- a/dts/upstream/Bindings/mfd/max77650.yaml
+++ b/dts/upstream/Bindings/mfd/max77650.yaml
@@ -53,16 +53,16 @@ properties:
Single string containing the name of the GPIO line.
regulators:
- $ref: ../regulator/max77650-regulator.yaml
+ $ref: /schemas/regulator/max77650-regulator.yaml
charger:
- $ref: ../power/supply/max77650-charger.yaml
+ $ref: /schemas/power/supply/max77650-charger.yaml
leds:
- $ref: ../leds/leds-max77650.yaml
+ $ref: /schemas/leds/leds-max77650.yaml
onkey:
- $ref: ../input/max77650-onkey.yaml
+ $ref: /schemas/input/max77650-onkey.yaml
required:
- compatible
diff --git a/dts/upstream/Bindings/mfd/maxim,max77686.yaml b/dts/upstream/Bindings/mfd/maxim,max77686.yaml
index d027aab..c13d51e 100644
--- a/dts/upstream/Bindings/mfd/maxim,max77686.yaml
+++ b/dts/upstream/Bindings/mfd/maxim,max77686.yaml
@@ -35,7 +35,7 @@ properties:
maxItems: 1
voltage-regulators:
- $ref: ../regulator/maxim,max77686.yaml
+ $ref: /schemas/regulator/maxim,max77686.yaml
description:
List of child nodes that specify the regulators.
diff --git a/dts/upstream/Bindings/mfd/maxim,max77693.yaml b/dts/upstream/Bindings/mfd/maxim,max77693.yaml
index 6a6f222..cce273b 100644
--- a/dts/upstream/Bindings/mfd/maxim,max77693.yaml
+++ b/dts/upstream/Bindings/mfd/maxim,max77693.yaml
@@ -81,7 +81,7 @@ properties:
- pwms
regulators:
- $ref: ../regulator/maxim,max77693.yaml
+ $ref: /schemas/regulator/maxim,max77693.yaml
description:
List of child nodes that specify the regulators.
diff --git a/dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml b/dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml
index 8103fb6..b7f01cb 100644
--- a/dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml
+++ b/dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml
@@ -160,6 +160,10 @@ patternProperties:
type: object
$ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
+ "^pbs@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/soc/qcom/qcom,pbs.yaml#
+
"phy@[0-9a-f]+$":
type: object
$ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml#
diff --git a/dts/upstream/Bindings/mfd/qcom,tcsr.yaml b/dts/upstream/Bindings/mfd/qcom,tcsr.yaml
index b97d770..c6bd14e 100644
--- a/dts/upstream/Bindings/mfd/qcom,tcsr.yaml
+++ b/dts/upstream/Bindings/mfd/qcom,tcsr.yaml
@@ -28,6 +28,7 @@ properties:
- qcom,sdm845-tcsr
- qcom,sdx55-tcsr
- qcom,sdx65-tcsr
+ - qcom,sdx75-tcsr
- qcom,sm4450-tcsr
- qcom,sm6115-tcsr
- qcom,sm8150-tcsr
diff --git a/dts/upstream/Bindings/mfd/qcom-pm8xxx.yaml b/dts/upstream/Bindings/mfd/qcom-pm8xxx.yaml
index 7fe3875..63e18d6 100644
--- a/dts/upstream/Bindings/mfd/qcom-pm8xxx.yaml
+++ b/dts/upstream/Bindings/mfd/qcom-pm8xxx.yaml
@@ -19,6 +19,7 @@ properties:
- enum:
- qcom,pm8058
- qcom,pm8821
+ - qcom,pm8901
- qcom,pm8921
- items:
- enum:
diff --git a/dts/upstream/Bindings/mfd/richtek,rt4831.yaml b/dts/upstream/Bindings/mfd/richtek,rt4831.yaml
index 4762eb1..e3ccba1 100644
--- a/dts/upstream/Bindings/mfd/richtek,rt4831.yaml
+++ b/dts/upstream/Bindings/mfd/richtek,rt4831.yaml
@@ -37,10 +37,10 @@ properties:
maxItems: 1
regulators:
- $ref: ../regulator/richtek,rt4831-regulator.yaml
+ $ref: /schemas/regulator/richtek,rt4831-regulator.yaml
backlight:
- $ref: ../leds/backlight/richtek,rt4831-backlight.yaml
+ $ref: /schemas/leds/backlight/richtek,rt4831-backlight.yaml
required:
- compatible
diff --git a/dts/upstream/Bindings/mfd/ricoh,rn5t618.yaml b/dts/upstream/Bindings/mfd/ricoh,rn5t618.yaml
index 032a7fb..e3d6430 100644
--- a/dts/upstream/Bindings/mfd/ricoh,rn5t618.yaml
+++ b/dts/upstream/Bindings/mfd/ricoh,rn5t618.yaml
@@ -28,7 +28,7 @@ allOf:
regulators:
patternProperties:
"^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$":
- $ref: ../regulator/regulator.yaml
+ $ref: /schemas/regulator/regulator.yaml
additionalProperties: false
- if:
properties:
@@ -40,7 +40,7 @@ allOf:
regulators:
patternProperties:
"^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$":
- $ref: ../regulator/regulator.yaml
+ $ref: /schemas/regulator/regulator.yaml
additionalProperties: false
- if:
properties:
@@ -52,7 +52,7 @@ allOf:
regulators:
patternProperties:
"^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$":
- $ref: ../regulator/regulator.yaml
+ $ref: /schemas/regulator/regulator.yaml
additionalProperties: false
properties:
diff --git a/dts/upstream/Bindings/mfd/rockchip,rk805.yaml b/dts/upstream/Bindings/mfd/rockchip,rk805.yaml
index 44f8188..da23915 100644
--- a/dts/upstream/Bindings/mfd/rockchip,rk805.yaml
+++ b/dts/upstream/Bindings/mfd/rockchip,rk805.yaml
@@ -82,7 +82,7 @@ properties:
patternProperties:
"^(DCDC_REG[1-4]|LDO_REG[1-3])$":
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/mfd/rockchip,rk808.yaml b/dts/upstream/Bindings/mfd/rockchip,rk808.yaml
index d2ac6fb..50dfffa 100644
--- a/dts/upstream/Bindings/mfd/rockchip,rk808.yaml
+++ b/dts/upstream/Bindings/mfd/rockchip,rk808.yaml
@@ -109,7 +109,7 @@ properties:
patternProperties:
"^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/mfd/rockchip,rk816.yaml b/dts/upstream/Bindings/mfd/rockchip,rk816.yaml
new file mode 100644
index 0000000..0676890
--- /dev/null
+++ b/dts/upstream/Bindings/mfd/rockchip,rk816.yaml
@@ -0,0 +1,274 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk816.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK816 Power Management Integrated Circuit
+
+maintainers:
+ - Chris Zhong <zyw@rock-chips.com>
+ - Zhang Qing <zhangqing@rock-chips.com>
+
+description:
+ Rockchip RK816 series PMIC. This device consists of an i2c controlled MFD
+ that includes regulators, a RTC, a GPIO controller, a power button, and a
+ battery charger manager with fuel gauge.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk816
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ description:
+ See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+ const: 1
+
+ clock-output-names:
+ maxItems: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ system-power-controller:
+ type: boolean
+ description:
+ Telling whether or not this PMIC is controlling the system power.
+
+ wakeup-source:
+ type: boolean
+
+ vcc1-supply:
+ description:
+ The input supply for dcdc1.
+
+ vcc2-supply:
+ description:
+ The input supply for dcdc2.
+
+ vcc3-supply:
+ description:
+ The input supply for dcdc3.
+
+ vcc4-supply:
+ description:
+ The input supply for dcdc4.
+
+ vcc5-supply:
+ description:
+ The input supply for ldo1, ldo2, and ldo3.
+
+ vcc6-supply:
+ description:
+ The input supply for ldo4, ldo5, and ldo6.
+
+ vcc7-supply:
+ description:
+ The input supply for boost.
+
+ vcc8-supply:
+ description:
+ The input supply for otg-switch.
+
+ regulators:
+ type: object
+ patternProperties:
+ '^(boost|dcdc[1-4]|ldo[1-6]|otg-switch)$':
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+ additionalProperties: false
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+
+ properties:
+ function:
+ enum: [gpio, thermistor]
+
+ pins:
+ $ref: /schemas/types.yaml#/definitions/string
+ const: gpio0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/rockchip.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rk816: pmic@1a {
+ compatible = "rockchip,rk816";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "xin32k", "rk816-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ gpio-controller;
+ system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ #gpio-cells = <2>;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc33_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_cpu: dcdc1 {
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_logic: dcdc2 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: dcdc3 {
+ regulator-name = "vcc_ddr";
+ regulator-initial-mode = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc33_io: dcdc4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_io";
+ regulator-initial-mode = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_pmu: ldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_tp: ldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_lcd: ldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: ldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: ldo6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+
+ rk816_gpio_pins: gpio-pins {
+ function = "gpio";
+ pins = "gpio0";
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/mfd/rockchip,rk817.yaml b/dts/upstream/Bindings/mfd/rockchip,rk817.yaml
index 92b1592..8c2fd0f 100644
--- a/dts/upstream/Bindings/mfd/rockchip,rk817.yaml
+++ b/dts/upstream/Bindings/mfd/rockchip,rk817.yaml
@@ -91,7 +91,7 @@ properties:
"^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
type: object
unevaluatedProperties: false
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
clocks:
diff --git a/dts/upstream/Bindings/mfd/rockchip,rk818.yaml b/dts/upstream/Bindings/mfd/rockchip,rk818.yaml
index fd4b9de..90d944c 100644
--- a/dts/upstream/Bindings/mfd/rockchip,rk818.yaml
+++ b/dts/upstream/Bindings/mfd/rockchip,rk818.yaml
@@ -101,7 +101,7 @@ properties:
patternProperties:
"^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$":
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/mfd/rohm,bd71815-pmic.yaml b/dts/upstream/Bindings/mfd/rohm,bd71815-pmic.yaml
index 05747e0..bb81307 100644
--- a/dts/upstream/Bindings/mfd/rohm,bd71815-pmic.yaml
+++ b/dts/upstream/Bindings/mfd/rohm,bd71815-pmic.yaml
@@ -61,7 +61,7 @@ properties:
default: 30000000
regulators:
- $ref: ../regulator/rohm,bd71815-regulator.yaml
+ $ref: /schemas/regulator/rohm,bd71815-regulator.yaml
description:
List of child nodes that specify the regulators.
diff --git a/dts/upstream/Bindings/mfd/rohm,bd71828-pmic.yaml b/dts/upstream/Bindings/mfd/rohm,bd71828-pmic.yaml
index 11089aa..fa17686 100644
--- a/dts/upstream/Bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/dts/upstream/Bindings/mfd/rohm,bd71828-pmic.yaml
@@ -17,7 +17,12 @@ description: |
properties:
compatible:
- const: rohm,bd71828
+ oneOf:
+ - const: rohm,bd71828
+
+ - items:
+ - const: rohm,bd71879
+ - const: rohm,bd71828
reg:
description:
@@ -60,12 +65,12 @@ properties:
here in Ohms.
regulators:
- $ref: ../regulator/rohm,bd71828-regulator.yaml
+ $ref: /schemas/regulator/rohm,bd71828-regulator.yaml
description:
List of child nodes that specify the regulators.
leds:
- $ref: ../leds/rohm,bd71828-leds.yaml
+ $ref: /schemas/leds/rohm,bd71828-leds.yaml
gpio-reserved-ranges:
description: |
@@ -73,6 +78,8 @@ properties:
used to mark the pins which should not be configured for GPIO. Please see
the ../gpio/gpio.txt for more information.
+ system-power-controller: true
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/mfd/rohm,bd71837-pmic.yaml b/dts/upstream/Bindings/mfd/rohm,bd71837-pmic.yaml
index 7aa343f..08f958d 100644
--- a/dts/upstream/Bindings/mfd/rohm,bd71837-pmic.yaml
+++ b/dts/upstream/Bindings/mfd/rohm,bd71837-pmic.yaml
@@ -109,7 +109,7 @@ properties:
- 14000
regulators:
- $ref: ../regulator/rohm,bd71837-regulator.yaml
+ $ref: /schemas/regulator/rohm,bd71837-regulator.yaml
description:
List of child nodes that specify the regulators.
diff --git a/dts/upstream/Bindings/mfd/rohm,bd9571mwv.yaml b/dts/upstream/Bindings/mfd/rohm,bd9571mwv.yaml
index 89f9efe..534cf03 100644
--- a/dts/upstream/Bindings/mfd/rohm,bd9571mwv.yaml
+++ b/dts/upstream/Bindings/mfd/rohm,bd9571mwv.yaml
@@ -67,7 +67,7 @@ properties:
patternProperties:
"^(vd09|vd18|vd25|vd33|dvfs)$":
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
properties:
regulator-name:
diff --git a/dts/upstream/Bindings/mfd/rohm,bd9576-pmic.yaml b/dts/upstream/Bindings/mfd/rohm,bd9576-pmic.yaml
index b7b323b..70fd9b5 100644
--- a/dts/upstream/Bindings/mfd/rohm,bd9576-pmic.yaml
+++ b/dts/upstream/Bindings/mfd/rohm,bd9576-pmic.yaml
@@ -71,7 +71,7 @@ properties:
# (HW) minimum for max timeout is 4ms, maximum 4416 ms.
regulators:
- $ref: ../regulator/rohm,bd9576-regulator.yaml
+ $ref: /schemas/regulator/rohm,bd9576-regulator.yaml
description:
List of child nodes that specify the regulators.
diff --git a/dts/upstream/Bindings/mfd/samsung,s2mpa01.yaml b/dts/upstream/Bindings/mfd/samsung,s2mpa01.yaml
index 055dfc3..ad92eb6 100644
--- a/dts/upstream/Bindings/mfd/samsung,s2mpa01.yaml
+++ b/dts/upstream/Bindings/mfd/samsung,s2mpa01.yaml
@@ -27,7 +27,7 @@ properties:
maxItems: 1
regulators:
- $ref: ../regulator/samsung,s2mpa01.yaml
+ $ref: /schemas/regulator/samsung,s2mpa01.yaml
description:
List of child nodes that specify the regulators.
diff --git a/dts/upstream/Bindings/mfd/samsung,s2mps11.yaml b/dts/upstream/Bindings/mfd/samsung,s2mps11.yaml
index 5ff6546..bc8b594 100644
--- a/dts/upstream/Bindings/mfd/samsung,s2mps11.yaml
+++ b/dts/upstream/Bindings/mfd/samsung,s2mps11.yaml
@@ -27,7 +27,7 @@ properties:
- samsung,s2mpu02-pmic
clocks:
- $ref: ../clock/samsung,s2mps11.yaml
+ $ref: /schemas/clock/samsung,s2mps11.yaml
description:
Child node describing clock provider.
@@ -75,7 +75,7 @@ allOf:
then:
properties:
regulators:
- $ref: ../regulator/samsung,s2mps11.yaml
+ $ref: /schemas/regulator/samsung,s2mps11.yaml
samsung,s2mps11-wrstbi-ground: false
- if:
@@ -86,7 +86,7 @@ allOf:
then:
properties:
regulators:
- $ref: ../regulator/samsung,s2mps13.yaml
+ $ref: /schemas/regulator/samsung,s2mps13.yaml
samsung,s2mps11-acokb-ground: false
- if:
@@ -97,7 +97,7 @@ allOf:
then:
properties:
regulators:
- $ref: ../regulator/samsung,s2mps14.yaml
+ $ref: /schemas/regulator/samsung,s2mps14.yaml
samsung,s2mps11-acokb-ground: false
samsung,s2mps11-wrstbi-ground: false
@@ -109,7 +109,7 @@ allOf:
then:
properties:
regulators:
- $ref: ../regulator/samsung,s2mps15.yaml
+ $ref: /schemas/regulator/samsung,s2mps15.yaml
samsung,s2mps11-acokb-ground: false
samsung,s2mps11-wrstbi-ground: false
@@ -121,7 +121,7 @@ allOf:
then:
properties:
regulators:
- $ref: ../regulator/samsung,s2mpu02.yaml
+ $ref: /schemas/regulator/samsung,s2mpu02.yaml
samsung,s2mps11-acokb-ground: false
samsung,s2mps11-wrstbi-ground: false
diff --git a/dts/upstream/Bindings/mfd/samsung,s5m8767.yaml b/dts/upstream/Bindings/mfd/samsung,s5m8767.yaml
index aea0b7d..2492480 100644
--- a/dts/upstream/Bindings/mfd/samsung,s5m8767.yaml
+++ b/dts/upstream/Bindings/mfd/samsung,s5m8767.yaml
@@ -21,7 +21,7 @@ properties:
const: samsung,s5m8767-pmic
clocks:
- $ref: ../clock/samsung,s2mps11.yaml
+ $ref: /schemas/clock/samsung,s2mps11.yaml
description:
Child node describing clock provider.
@@ -32,7 +32,7 @@ properties:
maxItems: 1
regulators:
- $ref: ../regulator/samsung,s5m8767.yaml
+ $ref: /schemas/regulator/samsung,s5m8767.yaml
description:
List of child nodes that specify the regulators.
diff --git a/dts/upstream/Bindings/mfd/st,stm32-lptimer.yaml b/dts/upstream/Bindings/mfd/st,stm32-lptimer.yaml
index 27329c5..d413088 100644
--- a/dts/upstream/Bindings/mfd/st,stm32-lptimer.yaml
+++ b/dts/upstream/Bindings/mfd/st,stm32-lptimer.yaml
@@ -44,6 +44,10 @@ properties:
wakeup-source: true
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
pwm:
type: object
additionalProperties: false
diff --git a/dts/upstream/Bindings/mfd/st,stm32-timers.yaml b/dts/upstream/Bindings/mfd/st,stm32-timers.yaml
index f84e09a..b0e438f 100644
--- a/dts/upstream/Bindings/mfd/st,stm32-timers.yaml
+++ b/dts/upstream/Bindings/mfd/st,stm32-timers.yaml
@@ -67,6 +67,10 @@ properties:
"#size-cells":
const: 0
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
pwm:
type: object
additionalProperties: false
diff --git a/dts/upstream/Bindings/mfd/st,stmfx.yaml b/dts/upstream/Bindings/mfd/st,stmfx.yaml
index 76551c9..61daf36 100644
--- a/dts/upstream/Bindings/mfd/st,stmfx.yaml
+++ b/dts/upstream/Bindings/mfd/st,stmfx.yaml
@@ -60,7 +60,7 @@ properties:
additionalProperties: false
allOf:
- - $ref: ../pinctrl/pinmux-node.yaml
+ - $ref: /schemas/pinctrl/pinmux-node.yaml
properties:
pins: true
diff --git a/dts/upstream/Bindings/mfd/st,stpmic1.yaml b/dts/upstream/Bindings/mfd/st,stpmic1.yaml
index b17ebeb..e822817 100644
--- a/dts/upstream/Bindings/mfd/st,stpmic1.yaml
+++ b/dts/upstream/Bindings/mfd/st,stpmic1.yaml
@@ -29,7 +29,7 @@ properties:
onkey:
type: object
- $ref: ../input/input.yaml
+ $ref: /schemas/input/input.yaml
properties:
compatible:
@@ -67,7 +67,7 @@ properties:
watchdog:
type: object
- $ref: ../watchdog/watchdog.yaml
+ $ref: /schemas/watchdog/watchdog.yaml
properties:
compatible:
diff --git a/dts/upstream/Bindings/mfd/stericsson,ab8500.yaml b/dts/upstream/Bindings/mfd/stericsson,ab8500.yaml
index 94f9767..b2cfa41 100644
--- a/dts/upstream/Bindings/mfd/stericsson,ab8500.yaml
+++ b/dts/upstream/Bindings/mfd/stericsson,ab8500.yaml
@@ -126,7 +126,7 @@ properties:
patternProperties:
"^channel@[0-9a-f]+$":
type: object
- $ref: ../iio/adc/adc.yaml#
+ $ref: /schemas/iio/adc/adc.yaml#
description: Represents each of the external channels which are
connected to the ADC.
@@ -180,22 +180,22 @@ properties:
ab8500_fg:
description: Node describing the AB8500 fuel gauge control block.
type: object
- $ref: ../power/supply/stericsson,ab8500-fg.yaml
+ $ref: /schemas/power/supply/stericsson,ab8500-fg.yaml
ab8500_btemp:
description: Node describing the AB8500 battery temperature control block.
type: object
- $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+ $ref: /schemas/power/supply/stericsson,ab8500-btemp.yaml
ab8500_charger:
description: Node describing the AB8500 battery charger control block.
type: object
- $ref: ../power/supply/stericsson,ab8500-charger.yaml
+ $ref: /schemas/power/supply/stericsson,ab8500-charger.yaml
ab8500_chargalg:
description: Node describing the AB8500 battery charger algorithm.
type: object
- $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+ $ref: /schemas/power/supply/stericsson,ab8500-chargalg.yaml
phy:
description: Node describing the AB8500 USB PHY control block.
@@ -339,40 +339,40 @@ properties:
ab8500_ldo_aux1:
description: The voltage for the auxiliary LDO regulator 1
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux2:
description: The voltage for the auxiliary LDO regulator 2
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux3:
description: The voltage for the auxiliary LDO regulator 3
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux4:
description: The voltage for the auxiliary LDO regulator 4
only present on AB8505
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux5:
description: The voltage for the auxiliary LDO regulator 5
only present on AB8505
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_aux6:
description: The voltage for the auxiliary LDO regulator 6
only present on AB8505
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
# There is never any AUX7 regulator which is confusing
@@ -381,21 +381,21 @@ properties:
description: The voltage for the auxiliary LDO regulator 8
only present on AB8505
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_intcore:
description: The LDO regulator for the internal core voltage
of the AB8500
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_adc:
description: Analog power regulator for the analog to digital converter
ADC, only present on AB8505
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_tvout:
@@ -404,39 +404,39 @@ properties:
the temperature of the NTC thermistor on the battery.
Only present on AB8500.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_audio:
description: The LDO regulator for the audio codec output
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_anamic1:
description: The LDO regulator for the analog microphone 1
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_anamic2:
description: The LDO regulator for the analog microphone 2
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_dmic:
description: The LDO regulator for the digital microphone
only present on AB8500
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ldo_ana:
description: Analog power regulator for CSI and DSI interfaces,
Camera Serial Interface CSI and Display Serial Interface DSI.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
required:
@@ -459,19 +459,19 @@ properties:
ab8500_ext1:
description: The voltage for the VSMPS1 external regulator
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ext2:
description: The voltage for the VSMPS2 external regulator
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
ab8500_ext3:
description: The voltage for the VSMPS3 external regulator
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
required:
@@ -482,7 +482,7 @@ properties:
patternProperties:
"^pwm@[1-9]+?$":
type: object
- $ref: ../pwm/pwm.yaml#
+ $ref: /schemas/pwm/pwm.yaml#
unevaluatedProperties: false
description: Represents each of the PWM blocks in the AB8500
diff --git a/dts/upstream/Bindings/mfd/stericsson,db8500-prcmu.yaml b/dts/upstream/Bindings/mfd/stericsson,db8500-prcmu.yaml
index cb2a42c..d6c1377 100644
--- a/dts/upstream/Bindings/mfd/stericsson,db8500-prcmu.yaml
+++ b/dts/upstream/Bindings/mfd/stericsson,db8500-prcmu.yaml
@@ -71,52 +71,52 @@ properties:
description: The voltage for the application processor, the
main voltage domain for the chip.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_varm:
description: The voltage for the ARM Cortex-A9 CPU.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_vmodem:
description: The voltage for the modem subsystem.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_vpll:
description: The voltage for the phase locked loop clocks.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_vsmps1:
description: Also known as VIO12, is a step-down voltage regulator
for 1.2V I/O. SMPS means System Management Power Source.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_vsmps2:
description: Also known as VIO18, is a step-down voltage regulator
for 1.8V I/O. SMPS means System Management Power Source.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_vsmps3:
description: This is a step-down voltage regulator
for 0.87 thru 1.875V I/O. SMPS means System Management Power Source.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_vrf1:
description: RF transceiver voltage regulator.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_sva_mmdsp:
@@ -124,21 +124,21 @@ properties:
voltage regulator. This is the voltage for the accelerator DSP
for video encoding and decoding.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_sva_mmdsp_ret:
description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
voltage regulator for retention mode.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_sva_pipe:
description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
voltage regulator for the data pipe.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_sia_mmdsp:
@@ -146,21 +146,21 @@ properties:
voltage regulator. This is the voltage for the accelerator DSP
for image encoding and decoding.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_sia_mmdsp_ret:
description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
voltage regulator for retention mode.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_sia_pipe:
description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
voltage regulator for the data pipe.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_sga:
@@ -168,7 +168,7 @@ properties:
This is in effect controlling the power to the MALI400 3D
accelerator block.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_b2r2_mcde:
@@ -176,33 +176,33 @@ properties:
Display Engine (MCDE) voltage regulator. These are two graphics
blocks.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_esram12:
description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_esram12_ret:
description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for
retention mode.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_esram34:
description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
db8500_esram34_ret:
description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for
retention mode.
type: object
- $ref: ../regulator/regulator.yaml#
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
required:
diff --git a/dts/upstream/Bindings/mfd/syscon.yaml b/dts/upstream/Bindings/mfd/syscon.yaml
index 9d55bee..7ed12a9 100644
--- a/dts/upstream/Bindings/mfd/syscon.yaml
+++ b/dts/upstream/Bindings/mfd/syscon.yaml
@@ -38,11 +38,20 @@ properties:
- allwinner,sun8i-h3-system-controller
- allwinner,sun8i-v3s-system-controller
- allwinner,sun50i-a64-system-controller
+ - altr,sdr-ctl
- amd,pensando-elba-syscon
+ - apm,xgene-csw
+ - apm,xgene-efuse
+ - apm,xgene-mcb
+ - apm,xgene-rb
+ - apm,xgene-scu
- brcm,cru-clkset
+ - brcm,sr-cdru
+ - brcm,sr-mhb
- freecom,fsg-cs2-system-controller
- fsl,imx93-aonmix-ns-syscfg
- fsl,imx93-wakeupmix-syscfg
+ - fsl,ls1088a-reset
- hisilicon,dsa-subctrl
- hisilicon,hi6220-sramctrl
- hisilicon,pcie-sas-subctrl
@@ -51,9 +60,15 @@ properties:
- intel,lgm-syscon
- loongson,ls1b-syscon
- loongson,ls1c-syscon
+ - marvell,armada-3700-cpu-misc
+ - marvell,armada-3700-nb-pm
+ - marvell,armada-3700-avs
- marvell,armada-3700-usb2-host-misc
+ - mediatek,mt2712-pctl-a-syscfg
+ - mediatek,mt6397-pctl-pmic-syscfg
- mediatek,mt8135-pctl-a-syscfg
- mediatek,mt8135-pctl-b-syscfg
+ - mediatek,mt8173-pctl-a-syscfg
- mediatek,mt8365-syscfg
- microchip,lan966x-cpu-syscon
- microchip,sparx5-cpu-syscon
@@ -73,6 +88,7 @@ properties:
- rockchip,rv1126-qos
- starfive,jh7100-sysmain
- ti,am62-usb-phy-ctrl
+ - ti,am62p-cpsw-mac-efuse
- ti,am654-dss-oldi-io-ctrl
- ti,am654-serdes-ctrl
- ti,j784s4-pcie-ctrl
diff --git a/dts/upstream/Bindings/mfd/ti,lp8732.yaml b/dts/upstream/Bindings/mfd/ti,lp8732.yaml
new file mode 100644
index 0000000..9a90cee
--- /dev/null
+++ b/dts/upstream/Bindings/mfd/ti,lp8732.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp8732.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP873X Power Management Integrated Circuit
+
+maintainers:
+ - J Keerthy <j-keerthy@ti.com>
+
+description:
+ PMIC with two high-current buck converters and two linear regulators.
+
+properties:
+ compatible:
+ enum:
+ - ti,lp8732
+ - ti,lp8733
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ regulators:
+ description:
+ List of child nodes that specify the regulator initialization data.
+ type: object
+ patternProperties:
+ "^buck[01]|ldo[01]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+ additionalProperties: false
+
+patternProperties:
+ '^(buck[01]|ldo[01])-in-supply$':
+ description: Phandle to parent supply of each regulator populated under regulators node.
+
+required:
+ - compatible
+ - reg
+ - regulators
+ - buck0-in-supply
+ - buck1-in-supply
+ - ldo0-in-supply
+ - ldo1-in-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic: pmic@60 {
+ compatible = "ti,lp8733";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ buck0-in-supply = <&vsys_3v3>;
+ buck1-in-supply = <&vsys_3v3>;
+ ldo0-in-supply = <&vsys_3v3>;
+ ldo1-in-supply = <&vsys_3v3>;
+
+ regulators {
+ buck0: buck0 {
+ regulator-name = "buck0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck1: buck1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0: ldo0 {
+ regulator-name = "ldo0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/mfd/ti,tps65086.yaml b/dts/upstream/Bindings/mfd/ti,tps65086.yaml
index bd36a07..a8eed90 100644
--- a/dts/upstream/Bindings/mfd/ti,tps65086.yaml
+++ b/dts/upstream/Bindings/mfd/ti,tps65086.yaml
@@ -49,7 +49,7 @@ properties:
patternProperties:
"^buck[1-6]$":
type: object
- $ref: ../regulator/regulator.yaml
+ $ref: /schemas/regulator/regulator.yaml
properties:
regulator-name: true
@@ -72,7 +72,7 @@ properties:
"^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
type: object
- $ref: ../regulator/regulator.yaml
+ $ref: /schemas/regulator/regulator.yaml
properties:
regulator-name: true
diff --git a/dts/upstream/Bindings/mfd/ti,tps6594.yaml b/dts/upstream/Bindings/mfd/ti,tps6594.yaml
index 9d43376..6341b60 100644
--- a/dts/upstream/Bindings/mfd/ti,tps6594.yaml
+++ b/dts/upstream/Bindings/mfd/ti,tps6594.yaml
@@ -21,6 +21,7 @@ properties:
- ti,lp8764-q1
- ti,tps6593-q1
- ti,tps6594-q1
+ - ti,tps65224-q1
reg:
description: I2C slave address or SPI chip select number.
diff --git a/dts/upstream/Bindings/mfd/ti,twl.yaml b/dts/upstream/Bindings/mfd/ti,twl.yaml
index 52ed228..c2357fe 100644
--- a/dts/upstream/Bindings/mfd/ti,twl.yaml
+++ b/dts/upstream/Bindings/mfd/ti,twl.yaml
@@ -15,6 +15,67 @@ description: |
USB transceiver or Audio amplifier.
These chips are connected to an i2c bus.
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,twl4030
+ then:
+ properties:
+ madc:
+ type: object
+ $ref: /schemas/iio/adc/ti,twl4030-madc.yaml
+ unevaluatedProperties: false
+
+ bci:
+ type: object
+ $ref: /schemas/power/supply/twl4030-charger.yaml
+ unevaluatedProperties: false
+
+ pwrbutton:
+ type: object
+ additionalProperties: false
+ properties:
+ compatible:
+ const: ti,twl4030-pwrbutton
+ interrupts:
+ items:
+ - items:
+ const: 8
+
+ watchdog:
+ type: object
+ additionalProperties: false
+ properties:
+ compatible:
+ const: ti,twl4030-wdt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,twl6030
+ then:
+ properties:
+ gpadc:
+ type: object
+ properties:
+ compatible:
+ const: ti,twl6030-gpadc
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,twl6032
+ then:
+ properties:
+ gpadc:
+ type: object
+ properties:
+ compatible:
+ const: ti,twl6032-gpadc
+
properties:
compatible:
description:
@@ -42,7 +103,16 @@ properties:
"#clock-cells":
const: 1
-additionalProperties: false
+ rtc:
+ type: object
+ additionalProperties: false
+ properties:
+ compatible:
+ const: ti,twl4030-rtc
+ interrupts:
+ maxItems: 1
+
+unevaluatedProperties: false
required:
- compatible
diff --git a/dts/upstream/Bindings/mfd/x-powers,axp152.yaml b/dts/upstream/Bindings/mfd/x-powers,axp152.yaml
index 06f1779..b8e8db0 100644
--- a/dts/upstream/Bindings/mfd/x-powers,axp152.yaml
+++ b/dts/upstream/Bindings/mfd/x-powers,axp152.yaml
@@ -83,6 +83,7 @@ allOf:
enum:
- x-powers,axp313a
- x-powers,axp15060
+ - x-powers,axp717
then:
properties:
@@ -99,6 +100,7 @@ properties:
- x-powers,axp221
- x-powers,axp223
- x-powers,axp313a
+ - x-powers,axp717
- x-powers,axp803
- x-powers,axp806
- x-powers,axp809
diff --git a/dts/upstream/Bindings/mmc/arm,pl18x.yaml b/dts/upstream/Bindings/mmc/arm,pl18x.yaml
index 940b126..8f62e2c 100644
--- a/dts/upstream/Bindings/mmc/arm,pl18x.yaml
+++ b/dts/upstream/Bindings/mmc/arm,pl18x.yaml
@@ -79,6 +79,10 @@ properties:
- const: rx
- const: tx
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
power-domains: true
resets:
diff --git a/dts/upstream/Bindings/mmc/fsl-imx-esdhc.yaml b/dts/upstream/Bindings/mmc/fsl-imx-esdhc.yaml
index 82f7ee8..b9b9995 100644
--- a/dts/upstream/Bindings/mmc/fsl-imx-esdhc.yaml
+++ b/dts/upstream/Bindings/mmc/fsl-imx-esdhc.yaml
@@ -91,6 +91,9 @@ properties:
- enum:
- fsl,imxrt1170-usdhc
- const: fsl,imxrt1050-usdhc
+ - items:
+ - const: nxp,s32g3-usdhc
+ - const: nxp,s32g2-usdhc
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/mmc/renesas,sdhi.yaml b/dts/upstream/Bindings/mmc/renesas,sdhi.yaml
index 29f2400..3d0e61e 100644
--- a/dts/upstream/Bindings/mmc/renesas,sdhi.yaml
+++ b/dts/upstream/Bindings/mmc/renesas,sdhi.yaml
@@ -12,16 +12,13 @@ maintainers:
properties:
compatible:
oneOf:
- - items:
- - const: renesas,sdhi-sh73a0 # R-Mobile APE6
- - items:
- - const: renesas,sdhi-r7s72100 # RZ/A1H
- - items:
- - const: renesas,sdhi-r7s9210 # SH-Mobile AG5
- - items:
- - const: renesas,sdhi-r8a73a4 # R-Mobile APE6
- - items:
- - const: renesas,sdhi-r8a7740 # R-Mobile A1
+ - enum:
+ - renesas,sdhi-mmc-r8a77470 # RZ/G1C
+ - renesas,sdhi-r7s72100 # RZ/A1H
+ - renesas,sdhi-r7s9210 # SH-Mobile AG5
+ - renesas,sdhi-r8a73a4 # R-Mobile APE6
+ - renesas,sdhi-r8a7740 # R-Mobile A1
+ - renesas,sdhi-sh73a0 # R-Mobile APE6
- items:
- enum:
- renesas,sdhi-r8a7778 # R-Car M1
@@ -41,8 +38,6 @@ properties:
- renesas,sdhi-r8a7794 # R-Car E2
- const: renesas,rcar-gen2-sdhi # R-Car Gen2 and RZ/G1
- items:
- - const: renesas,sdhi-mmc-r8a77470 # RZ/G1C (SDHI/MMC IP)
- - items:
- enum:
- renesas,sdhi-r8a774a1 # RZ/G2M
- renesas,sdhi-r8a774b1 # RZ/G2N
@@ -56,11 +51,6 @@ properties:
- renesas,sdhi-r8a77980 # R-Car V3H
- renesas,sdhi-r8a77990 # R-Car E3
- renesas,sdhi-r8a77995 # R-Car D3
- - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five
- - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
- - renesas,sdhi-r9a07g054 # RZ/V2L
- - renesas,sdhi-r9a08g045 # RZ/G3S
- - renesas,sdhi-r9a09g011 # RZ/V2M
- const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
- items:
- enum:
@@ -69,6 +59,14 @@ properties:
- renesas,sdhi-r8a779g0 # R-Car V4H
- renesas,sdhi-r8a779h0 # R-Car V4M
- const: renesas,rcar-gen4-sdhi # R-Car Gen4
+ - items:
+ - enum:
+ - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five
+ - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
+ - renesas,sdhi-r9a07g054 # RZ/V2L
+ - renesas,sdhi-r9a08g045 # RZ/G3S
+ - renesas,sdhi-r9a09g011 # RZ/V2M
+ - const: renesas,rzg2l-sdhi
reg:
maxItems: 1
@@ -120,12 +118,7 @@ allOf:
properties:
compatible:
contains:
- enum:
- - renesas,sdhi-r9a07g043
- - renesas,sdhi-r9a07g044
- - renesas,sdhi-r9a07g054
- - renesas,sdhi-r9a08g045
- - renesas,sdhi-r9a09g011
+ const: renesas,rzg2l-sdhi
then:
properties:
clocks:
diff --git a/dts/upstream/Bindings/mtd/mtd.yaml b/dts/upstream/Bindings/mtd/mtd.yaml
index ee442ec..bbb5621 100644
--- a/dts/upstream/Bindings/mtd/mtd.yaml
+++ b/dts/upstream/Bindings/mtd/mtd.yaml
@@ -48,8 +48,8 @@ patternProperties:
type: object
allOf:
- - $ref: ../nvmem/nvmem.yaml#
- - $ref: ../nvmem/nvmem-deprecated-cells.yaml#
+ - $ref: /schemas/nvmem/nvmem.yaml#
+ - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml#
unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/mtd/partitions/binman.yaml b/dts/upstream/Bindings/mtd/partitions/binman.yaml
new file mode 100644
index 0000000..bb4b085
--- /dev/null
+++ b/dts/upstream/Bindings/mtd/partitions/binman.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/binman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binman entries
+
+description: |
+ This corresponds to a binman 'entry'. It is a single partition which holds
+ data of a defined type.
+
+ Binman uses the type to indicate what data file / type to place in the
+ partition. There are quite a number of binman-specific entry types, such as
+ section, fill and files, to be added later.
+
+maintainers:
+ - Simon Glass <sjg@chromium.org>
+
+allOf:
+ - $ref: /schemas/mtd/partitions/partition.yaml#
+
+properties:
+ compatible:
+ enum:
+ - u-boot # u-boot.bin from U-Boot project
+ - tfa-bl31 # bl31.bin or bl31.elf from TF-A project
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@100000 {
+ compatible = "u-boot";
+ reg = <0x100000 0xf00000>;
+ align-size = <0x1000>;
+ align-end = <0x10000>;
+ };
+
+ partition@200000 {
+ compatible = "tfa-bl31";
+ reg = <0x200000 0x100000>;
+ align = <0x4000>;
+ };
+ };
diff --git a/dts/upstream/Bindings/mtd/partitions/partition.yaml b/dts/upstream/Bindings/mtd/partitions/partition.yaml
index 1ebe9e2..80d0452 100644
--- a/dts/upstream/Bindings/mtd/partitions/partition.yaml
+++ b/dts/upstream/Bindings/mtd/partitions/partition.yaml
@@ -57,6 +57,57 @@ properties:
user space from
type: boolean
+ align:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2
+ maximum: 0x80000000
+ multipleOf: 2
+ description:
+ This sets the alignment of the entry in bytes.
+
+ The entry offset is adjusted so that the entry starts on an aligned
+ boundary within the containing section or image. For example ‘align =
+ <16>’ means that the entry will start on a 16-byte boundary. This may
+ mean that padding is added before the entry. The padding is part of
+ the containing section but is not included in the entry, meaning that
+ an empty space may be created before the entry starts. Alignment
+ must be a power of 2. If ‘align’ is not provided, no alignment is
+ performed.
+
+ align-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2
+ maximum: 0x80000000
+ multipleOf: 2
+ description:
+ This sets the alignment of the entry size in bytes. It must be a power
+ of 2.
+
+ For example, to ensure that the size of an entry is a multiple of 64
+ bytes, set this to 64. While this does not affect the content of the
+ entry itself (the padding is performed only when its parent section is
+ assembled), the end result is that the entry ends with the padding
+ bytes, so may grow. If ‘align-size’ is not provided, no alignment is
+ performed.
+
+ align-end:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2
+ maximum: 0x80000000
+ multipleOf: 2
+ description:
+ This sets the alignment (in bytes) of the end of an entry with respect
+ to the containing section. It must be a power of 2.
+
+ Some entries require that they end on an alignment boundary,
+ regardless of where they start. This does not move the start of the
+ entry, so the content of the entry will still start at the beginning.
+ But there may be padding at the end. While this does not affect the
+ content of the entry itself (the padding is performed only when its
+ parent section is assembled), the end result is that the entry ends
+ with the padding bytes, so may grow. If ‘align-end’ is not provided,
+ no alignment is performed.
+
if:
not:
required: [ reg ]
@@ -67,3 +118,24 @@ then:
# This is a generic file other binding inherit from and extend
additionalProperties: true
+
+examples:
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@100000 {
+ compatible = "u-boot";
+ reg = <0x100000 0xf00000>;
+ align-size = <0x1000>;
+ align-end = <0x10000>;
+ };
+
+ partition@200000 {
+ compatible = "tfa-bl31";
+ reg = <0x200000 0x100000>;
+ align = <0x4000>;
+ };
+ };
diff --git a/dts/upstream/Bindings/mtd/samsung,s5pv210-onenand.yaml b/dts/upstream/Bindings/mtd/samsung,s5pv210-onenand.yaml
new file mode 100644
index 0000000..e07941b
--- /dev/null
+++ b/dts/upstream/Bindings/mtd/samsung,s5pv210-onenand.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/samsung,s5pv210-onenand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC OneNAND Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - samsung,s5pv210-onenand
+
+ reg:
+ items:
+ - description: Control registers
+ - description: OneNAND interface nCE[0]
+ - description: OneNAND interface nCE[1]
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: bus
+ - const: onenand
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+allOf:
+ - $ref: nand-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/s5pv210.h>
+
+ nand-controller@b0600000 {
+ compatible = "samsung,s5pv210-onenand";
+ reg = <0xb0600000 0x2000>,
+ <0xb0000000 0x20000>,
+ <0xb0040000 0x20000>;
+ clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
+ clock-names = "bus", "onenand";
+ interrupt-parent = <&vic1>;
+ interrupts = <31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ };
+ };
diff --git a/dts/upstream/Bindings/net/airoha,en8811h.yaml b/dts/upstream/Bindings/net/airoha,en8811h.yaml
new file mode 100644
index 0000000..ecb5149
--- /dev/null
+++ b/dts/upstream/Bindings/net/airoha,en8811h.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,en8811h.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN8811H PHY
+
+maintainers:
+ - Eric Woudstra <ericwouds@gmail.com>
+
+description:
+ The Airoha EN8811H PHY has the ability to reverse polarity
+ on the lines to and/or from the MAC. It is reversed by
+ the booleans in the devicetree node of the phy.
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ethernet-phy-id03a2.a411
+
+ reg:
+ maxItems: 1
+
+ airoha,pnswap-rx:
+ type: boolean
+ description:
+ Reverse rx polarity of the SERDES. This is the receiving
+ side of the lines from the MAC towards the EN881H.
+
+ airoha,pnswap-tx:
+ type: boolean
+ description:
+ Reverse tx polarity of SERDES. This is the transmitting
+ side of the lines from EN8811H towards the MAC.
+
+required:
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ compatible = "ethernet-phy-id03a2.a411";
+ reg = <1>;
+ airoha,pnswap-rx;
+ };
+ };
diff --git a/dts/upstream/Bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml b/dts/upstream/Bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
new file mode 100644
index 0000000..67ff7ca
--- /dev/null
+++ b/dts/upstream/Bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7921s-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7921S Bluetooth
+
+maintainers:
+ - Sean Wang <sean.wang@mediatek.com>
+
+description:
+ MT7921S is an SDIO-attached dual-radio WiFi+Bluetooth Combo chip; each
+ function is its own SDIO function on a shared SDIO interface. The chip
+ has two dedicated reset lines, one for each function core.
+ This binding only covers the Bluetooth SDIO function, with one device
+ node describing only this SDIO function.
+
+allOf:
+ - $ref: bluetooth-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7921s-bluetooth
+
+ reg:
+ const: 2
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ An active-low reset line for the Bluetooth core; on typical M.2
+ key E modules this is the W_DISABLE2# pin.
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mmc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bluetooth@2 {
+ compatible = "mediatek,mt7921s-bluetooth";
+ reg = <2>;
+ reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/dts/upstream/Bindings/net/broadcom-bluetooth.yaml b/dts/upstream/Bindings/net/broadcom-bluetooth.yaml
index cc70b00..4a1bfc2 100644
--- a/dts/upstream/Bindings/net/broadcom-bluetooth.yaml
+++ b/dts/upstream/Bindings/net/broadcom-bluetooth.yaml
@@ -14,20 +14,25 @@ description:
properties:
compatible:
- enum:
- - brcm,bcm20702a1
- - brcm,bcm4329-bt
- - brcm,bcm4330-bt
- - brcm,bcm4334-bt
- - brcm,bcm43430a0-bt
- - brcm,bcm43430a1-bt
- - brcm,bcm43438-bt
- - brcm,bcm4345c5
- - brcm,bcm43540-bt
- - brcm,bcm4335a0
- - brcm,bcm4349-bt
- - cypress,cyw4373a0-bt
- - infineon,cyw55572-bt
+ oneOf:
+ - items:
+ - enum:
+ - infineon,cyw43439-bt
+ - const: brcm,bcm4329-bt
+ - enum:
+ - brcm,bcm20702a1
+ - brcm,bcm4329-bt
+ - brcm,bcm4330-bt
+ - brcm,bcm4334-bt
+ - brcm,bcm43430a0-bt
+ - brcm,bcm43430a1-bt
+ - brcm,bcm43438-bt
+ - brcm,bcm4345c5
+ - brcm,bcm43540-bt
+ - brcm,bcm4335a0
+ - brcm,bcm4349-bt
+ - cypress,cyw4373a0-bt
+ - infineon,cyw55572-bt
shutdown-gpios:
maxItems: 1
diff --git a/dts/upstream/Bindings/net/can/bosch,m_can.yaml b/dts/upstream/Bindings/net/can/bosch,m_can.yaml
index f9ffb96..c488752 100644
--- a/dts/upstream/Bindings/net/can/bosch,m_can.yaml
+++ b/dts/upstream/Bindings/net/can/bosch,m_can.yaml
@@ -118,6 +118,10 @@ properties:
phys:
maxItems: 1
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/net/fsl,fman-dtsec.yaml b/dts/upstream/Bindings/net/fsl,fman-dtsec.yaml
index c80c880..60aaf30 100644
--- a/dts/upstream/Bindings/net/fsl,fman-dtsec.yaml
+++ b/dts/upstream/Bindings/net/fsl,fman-dtsec.yaml
@@ -128,7 +128,6 @@ required:
- cell-index
- reg
- fsl,fman-ports
- - ptp-timer
dependencies:
pcs-handle-names:
diff --git a/dts/upstream/Bindings/net/nxp,dwmac-imx.yaml b/dts/upstream/Bindings/net/nxp,dwmac-imx.yaml
index 4c01cae..87bc441 100644
--- a/dts/upstream/Bindings/net/nxp,dwmac-imx.yaml
+++ b/dts/upstream/Bindings/net/nxp,dwmac-imx.yaml
@@ -66,6 +66,10 @@ properties:
Should be phandle/offset pair. The phandle to the syscon node which
encompases the GPR register, and the offset of the GPR register.
+ nvmem-cells: true
+
+ nvmem-cell-names: true
+
snps,rmii_refclk_ext:
$ref: /schemas/types.yaml#/definitions/flag
description:
diff --git a/dts/upstream/Bindings/net/pse-pd/microchip,pd692x0.yaml b/dts/upstream/Bindings/net/pse-pd/microchip,pd692x0.yaml
new file mode 100644
index 0000000..fd4244f
--- /dev/null
+++ b/dts/upstream/Bindings/net/pse-pd/microchip,pd692x0.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/microchip,pd692x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PD692x0 Power Sourcing Equipment controller
+
+maintainers:
+ - Kory Maincent <kory.maincent@bootlin.com>
+
+allOf:
+ - $ref: pse-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - microchip,pd69200
+ - microchip,pd69210
+ - microchip,pd69220
+
+ reg:
+ maxItems: 1
+
+ managers:
+ type: object
+ additionalProperties: false
+ description:
+ List of the PD69208T4/PD69204T4/PD69208M PSE managers. Each manager
+ have 4 or 8 physical ports according to the chip version. No need to
+ specify the SPI chip select as it is automatically detected by the
+ PD692x0 PSE controller. The PSE managers have to be described from
+ the lowest chip select to the greatest one, which is the detection
+ behavior of the PD692x0 PSE controller. The PD692x0 support up to
+ 12 PSE managers which can expose up to 96 physical ports. All
+ physical ports available on a manager have to be described in the
+ incremental order even if they are not used.
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+ patternProperties:
+ "^manager@[0-9a-b]$":
+ type: object
+ additionalProperties: false
+ description:
+ PD69208T4/PD69204T4/PD69208M PSE manager exposing 4 or 8 physical
+ ports.
+
+ properties:
+ reg:
+ description:
+ Incremental index of the PSE manager starting from 0, ranging
+ from lowest to highest chip select, up to 11.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ '^port@[0-7]$':
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+ required:
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+required:
+ - compatible
+ - reg
+ - pse-pis
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-pse@3c {
+ compatible = "microchip,pd69200";
+ reg = <0x3c>;
+
+ managers {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ manager@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phys0: port@0 {
+ reg = <0>;
+ };
+
+ phys1: port@1 {
+ reg = <1>;
+ };
+
+ phys2: port@2 {
+ reg = <2>;
+ };
+
+ phys3: port@3 {
+ reg = <3>;
+ };
+ };
+
+ manager@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phys4: port@0 {
+ reg = <0>;
+ };
+
+ phys5: port@1 {
+ reg = <1>;
+ };
+
+ phys6: port@2 {
+ reg = <2>;
+ };
+
+ phys7: port@3 {
+ reg = <3>;
+ };
+ };
+ };
+
+ pse-pis {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pse_pi0: pse-pi@0 {
+ reg = <0>;
+ #pse-cells = <0>;
+ pairset-names = "alternative-a", "alternative-b";
+ pairsets = <&phys0>, <&phys1>;
+ polarity-supported = "MDI", "S";
+ vpwr-supply = <&vpwr1>;
+ };
+ pse_pi1: pse-pi@1 {
+ reg = <1>;
+ #pse-cells = <0>;
+ pairset-names = "alternative-a";
+ pairsets = <&phys2>;
+ polarity-supported = "MDI";
+ vpwr-supply = <&vpwr2>;
+ };
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/net/pse-pd/pse-controller.yaml b/dts/upstream/Bindings/net/pse-pd/pse-controller.yaml
index 2d382fa..a12cda8 100644
--- a/dts/upstream/Bindings/net/pse-pd/pse-controller.yaml
+++ b/dts/upstream/Bindings/net/pse-pd/pse-controller.yaml
@@ -13,6 +13,7 @@ description: Binding for the Power Sourcing Equipment (PSE) as defined in the
maintainers:
- Oleksij Rempel <o.rempel@pengutronix.de>
+ - Kory Maincent <kory.maincent@bootlin.com>
properties:
$nodename:
@@ -22,11 +23,105 @@ properties:
description:
Used to uniquely identify a PSE instance within an IC. Will be
0 on PSE nodes with only a single output and at least 1 on nodes
- controlling several outputs.
+ controlling several outputs which are not described in the pse-pis
+ subnode. This property is deprecated, please use pse-pis instead.
enum: [0, 1]
-required:
- - "#pse-cells"
+ pse-pis:
+ type: object
+ description:
+ Overview of the PSE PIs provided by the controller.
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+ patternProperties:
+ "^pse-pi@[0-9a-f]+$":
+ type: object
+ description:
+ PSE PI for power delivery via pairsets, compliant with IEEE
+ 802.3-2022, Section 145.2.4. Each pairset comprises a positive and
+ a negative VPSE pair, adhering to the pinout configurations
+ detailed in the standard.
+ See Documentation/networking/pse-pd/pse-pi.rst for details.
+
+ properties:
+ reg:
+ description:
+ Address describing the PSE PI index.
+ maxItems: 1
+
+ "#pse-cells":
+ const: 0
+
+ pairset-names:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ Names of the pairsets as per IEEE 802.3-2022, Section 145.2.4.
+ Each name should correspond to a phandle in the 'pairset'
+ property pointing to the power supply for that pairset.
+ minItems: 1
+ maxItems: 2
+ items:
+ enum:
+ - alternative-a
+ - alternative-b
+
+ pairsets:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ List of phandles, each pointing to the power supply for the
+ corresponding pairset named in 'pairset-names'. This property
+ aligns with IEEE 802.3-2022, Section 33.2.3 and 145.2.4.
+ PSE Pinout Alternatives (as per IEEE 802.3-2022 Table 145\u20133)
+ |-----------|---------------|---------------|---------------|---------------|
+ | Conductor | Alternative A | Alternative A | Alternative B | Alternative B |
+ | | (MDI-X) | (MDI) | (X) | (S) |
+ |-----------|---------------|---------------|---------------|---------------|
+ | 1 | Negative VPSE | Positive VPSE | - | - |
+ | 2 | Negative VPSE | Positive VPSE | - | - |
+ | 3 | Positive VPSE | Negative VPSE | - | - |
+ | 4 | - | - | Negative VPSE | Positive VPSE |
+ | 5 | - | - | Negative VPSE | Positive VPSE |
+ | 6 | Positive VPSE | Negative VPSE | - | - |
+ | 7 | - | - | Positive VPSE | Negative VPSE |
+ | 8 | - | - | Positive VPSE | Negative VPSE |
+ minItems: 1
+ maxItems: 2
+
+ polarity-supported:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ Polarity configuration supported by the PSE PI pairsets.
+ minItems: 1
+ maxItems: 4
+ items:
+ enum:
+ - MDI-X
+ - MDI
+ - X
+ - S
+
+ vpwr-supply:
+ description: Regulator power supply for the PSE PI.
+
+ required:
+ - reg
+ - "#pse-cells"
+
+oneOf:
+ - required:
+ - "#pse-cells"
+ - required:
+ - pse-pis
additionalProperties: true
diff --git a/dts/upstream/Bindings/net/pse-pd/ti,tps23881.yaml b/dts/upstream/Bindings/net/pse-pd/ti,tps23881.yaml
new file mode 100644
index 0000000..6992d56
--- /dev/null
+++ b/dts/upstream/Bindings/net/pse-pd/ti,tps23881.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/ti,tps23881.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS23881 Power Sourcing Equipment controller
+
+maintainers:
+ - Kory Maincent <kory.maincent@bootlin.com>
+
+allOf:
+ - $ref: pse-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,tps23881
+
+ reg:
+ maxItems: 1
+
+ '#pse-cells':
+ const: 1
+
+ channels:
+ description: each set of 8 ports can be assigned to one physical
+ channels or two for PoE4. This parameter describes the configuration
+ of the ports conversion matrix that establishes relationship between
+ the logical ports and the physical channels.
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ '^channel@[0-7]$':
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-pse@20 {
+ compatible = "ti,tps23881";
+ reg = <0x20>;
+
+ channels {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phys0: channel@0 {
+ reg = <0>;
+ };
+
+ phys1: channel@1 {
+ reg = <1>;
+ };
+
+ phys2: channel@2 {
+ reg = <2>;
+ };
+ };
+
+ pse-pis {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pse_pi0: pse-pi@0 {
+ reg = <0>;
+ #pse-cells = <0>;
+ pairset-names = "alternative-a", "alternative-b";
+ pairsets = <&phys0>, <&phys1>;
+ polarity-supported = "MDI", "S";
+ vpwr-supply = <&vpwr1>;
+ };
+
+ pse_pi1: pse-pi@1 {
+ reg = <1>;
+ #pse-cells = <0>;
+ pairset-names = "alternative-a";
+ pairsets = <&phys2>;
+ polarity-supported = "MDI";
+ vpwr-supply = <&vpwr2>;
+ };
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/net/qcom,ethqos.yaml b/dts/upstream/Bindings/net/qcom,ethqos.yaml
index 69a337c..6672327 100644
--- a/dts/upstream/Bindings/net/qcom,ethqos.yaml
+++ b/dts/upstream/Bindings/net/qcom,ethqos.yaml
@@ -61,6 +61,8 @@ properties:
iommus:
maxItems: 1
+ dma-coherent: true
+
phys: true
phy-names:
diff --git a/dts/upstream/Bindings/net/qcom,ipq4019-mdio.yaml b/dts/upstream/Bindings/net/qcom,ipq4019-mdio.yaml
index 0029e19..a94480e 100644
--- a/dts/upstream/Bindings/net/qcom,ipq4019-mdio.yaml
+++ b/dts/upstream/Bindings/net/qcom,ipq4019-mdio.yaml
@@ -20,6 +20,7 @@ properties:
- enum:
- qcom,ipq6018-mdio
- qcom,ipq8074-mdio
+ - qcom,ipq9574-mdio
- const: qcom,ipq4019-mdio
"#address-cells":
@@ -76,6 +77,7 @@ allOf:
- qcom,ipq5018-mdio
- qcom,ipq6018-mdio
- qcom,ipq8074-mdio
+ - qcom,ipq9574-mdio
then:
required:
- clocks
diff --git a/dts/upstream/Bindings/net/renesas,etheravb.yaml b/dts/upstream/Bindings/net/renesas,etheravb.yaml
index de7ba7f..21a92f1 100644
--- a/dts/upstream/Bindings/net/renesas,etheravb.yaml
+++ b/dts/upstream/Bindings/net/renesas,etheravb.yaml
@@ -88,10 +88,16 @@ properties:
'#address-cells':
description: Number of address cells for the MDIO bus.
const: 1
+ deprecated: true
'#size-cells':
description: Number of size cells on the MDIO bus.
const: 0
+ deprecated: true
+
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
renesas,no-ether-link:
type: boolean
@@ -110,9 +116,13 @@ properties:
tx-internal-delay-ps:
enum: [0, 2000]
+# In older bindings there where no mdio child-node to describe the MDIO bus
+# and the PHY. To not fail older bindings accept any node with an address. New
+# users should describe the PHY inside the mdio child-node.
patternProperties:
"@[0-9a-f]$":
type: object
+ deprecated: true
required:
- compatible
@@ -123,8 +133,6 @@ required:
- resets
- phy-mode
- phy-handle
- - '#address-cells'
- - '#size-cells'
allOf:
- $ref: ethernet-controller.yaml#
diff --git a/dts/upstream/Bindings/net/renesas,ethertsn.yaml b/dts/upstream/Bindings/net/renesas,ethertsn.yaml
index ea35d19..b4680a1 100644
--- a/dts/upstream/Bindings/net/renesas,ethertsn.yaml
+++ b/dts/upstream/Bindings/net/renesas,ethertsn.yaml
@@ -71,16 +71,8 @@ properties:
enum: [0, 2000]
default: 0
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
-patternProperties:
- "^ethernet-phy@[0-9a-f]$":
- type: object
- $ref: ethernet-phy.yaml#
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
unevaluatedProperties: false
required:
@@ -94,8 +86,7 @@ required:
- resets
- phy-mode
- phy-handle
- - '#address-cells'
- - '#size-cells'
+ - mdio
additionalProperties: false
@@ -122,14 +113,18 @@ examples:
tx-internal-delay-ps = <2000>;
phy-handle = <&phy3>;
- #address-cells = <1>;
- #size-cells = <0>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
- phy3: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- interrupt-parent = <&gpio4>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ reset-post-delay-us = <4000>;
+
+ phy3: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
diff --git a/dts/upstream/Bindings/net/renesas,rzn1-gmac.yaml b/dts/upstream/Bindings/net/renesas,rzn1-gmac.yaml
new file mode 100644
index 0000000..d9a8d58
--- /dev/null
+++ b/dts/upstream/Bindings/net/renesas,rzn1-gmac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,rzn1-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas GMAC
+
+maintainers:
+ - Romain Gantois <romain.gantois@bootlin.com>
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r9a06g032-gmac
+ - renesas,rzn1-gmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a06g032-gmac
+ - const: renesas,rzn1-gmac
+ - const: snps,dwmac
+
+ pcs-handle:
+ description:
+ phandle pointing to a PCS sub-node compatible with
+ renesas,rzn1-miic.yaml#
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ethernet@44000000 {
+ compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+ reg = <0x44000000 0x2000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ clock-names = "stmmaceth";
+ clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+ power-domains = <&sysctrl>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <2048>;
+ rx-fifo-depth = <4096>;
+ pcs-handle = <&mii_conv1>;
+ phy-mode = "mii";
+ };
+
+...
diff --git a/dts/upstream/Bindings/net/rockchip-dwmac.yaml b/dts/upstream/Bindings/net/rockchip-dwmac.yaml
index 70bbc42..6bbe96e 100644
--- a/dts/upstream/Bindings/net/rockchip-dwmac.yaml
+++ b/dts/upstream/Bindings/net/rockchip-dwmac.yaml
@@ -137,8 +137,6 @@ examples:
assigned-clock-parents = <&ext_gmac>;
rockchip,grf = <&grf>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
clock_in_out = "input";
- tx_delay = <0x30>;
- rx_delay = <0x10>;
};
diff --git a/dts/upstream/Bindings/net/sff,sfp.yaml b/dts/upstream/Bindings/net/sff,sfp.yaml
index bf6cbc7..90611b5 100644
--- a/dts/upstream/Bindings/net/sff,sfp.yaml
+++ b/dts/upstream/Bindings/net/sff,sfp.yaml
@@ -29,39 +29,39 @@ properties:
allowable by a module in the slot, in milli-Watts. Presently, modules can
be up to 1W, 1.5W or 2W.
- "mod-def0-gpios":
+ mod-def0-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module
presence input gpio signal, active (module absent) high. Must not be
present for SFF modules
- "los-gpios":
+ los-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Receiver Loss of Signal Indication
input gpio signal, active (signal lost) high
- "tx-fault-gpios":
+ tx-fault-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Module Transmitter Fault input gpio
signal, active (fault condition) high
- "tx-disable-gpios":
+ tx-disable-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Transmitter Disable output gpio
signal, active (Tx disable) high
- "rate-select0-gpios":
+ rate-select0-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)
output gpio signal, low - low Rx rate, high - high Rx rate Must not be
present for SFF modules
- "rate-select1-gpios":
+ rate-select1-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)
diff --git a/dts/upstream/Bindings/net/snps,dwmac.yaml b/dts/upstream/Bindings/net/snps,dwmac.yaml
index 6b0341a..21cc27e 100644
--- a/dts/upstream/Bindings/net/snps,dwmac.yaml
+++ b/dts/upstream/Bindings/net/snps,dwmac.yaml
@@ -242,7 +242,8 @@ properties:
type: boolean
description: Multicast & Broadcast Packets
snps,priority:
- $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
description: Bitmask of the tagged frames priorities assigned to the queue
allOf:
- if:
@@ -327,9 +328,6 @@ properties:
snps,tx-sched-dwrr:
type: boolean
description: Deficit Weighted Round Robin
- snps,tx-sched-sp:
- type: boolean
- description: Strict priority
allOf:
- if:
required:
@@ -338,7 +336,6 @@ properties:
properties:
snps,tx-sched-wfq: false
snps,tx-sched-dwrr: false
- snps,tx-sched-sp: false
- if:
required:
- snps,tx-sched-wfq
@@ -346,7 +343,6 @@ properties:
properties:
snps,tx-sched-wrr: false
snps,tx-sched-dwrr: false
- snps,tx-sched-sp: false
- if:
required:
- snps,tx-sched-dwrr
@@ -354,15 +350,6 @@ properties:
properties:
snps,tx-sched-wrr: false
snps,tx-sched-wfq: false
- snps,tx-sched-sp: false
- - if:
- required:
- - snps,tx-sched-sp
- then:
- properties:
- snps,tx-sched-wrr: false
- snps,tx-sched-wfq: false
- snps,tx-sched-dwrr: false
patternProperties:
"^queue[0-9]$":
description: Each subnode represents a queue.
@@ -393,7 +380,8 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
description: max read outstanding req. limit
snps,priority:
- $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
description:
Bitmask of the tagged frames priorities assigned to the queue.
When a PFC frame is received with priorities matching the bitmask,
diff --git a/dts/upstream/Bindings/net/starfive,jh7110-dwmac.yaml b/dts/upstream/Bindings/net/starfive,jh7110-dwmac.yaml
index 0d19629..313a153 100644
--- a/dts/upstream/Bindings/net/starfive,jh7110-dwmac.yaml
+++ b/dts/upstream/Bindings/net/starfive,jh7110-dwmac.yaml
@@ -30,6 +30,10 @@ properties:
- items:
- const: starfive,jh7110-dwmac
- const: snps,dwmac-5.20
+ - items:
+ - const: starfive,jh8100-dwmac
+ - const: starfive,jh7110-dwmac
+ - const: snps,dwmac-5.20
reg:
maxItems: 1
@@ -116,11 +120,25 @@ allOf:
minItems: 3
maxItems: 3
- resets:
- minItems: 2
-
- reset-names:
- minItems: 2
+ if:
+ properties:
+ compatible:
+ contains:
+ const: starfive,jh8100-dwmac
+ then:
+ properties:
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: stmmaceth
+ else:
+ properties:
+ resets:
+ minItems: 2
+
+ reset-names:
+ minItems: 2
unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/net/stm32-dwmac.yaml b/dts/upstream/Bindings/net/stm32-dwmac.yaml
index fc8c96b..7ccf756 100644
--- a/dts/upstream/Bindings/net/stm32-dwmac.yaml
+++ b/dts/upstream/Bindings/net/stm32-dwmac.yaml
@@ -82,6 +82,13 @@ properties:
Should be phandle/offset pair. The phandle to the syscon node which
encompases the glue register, and the offset of the control register
+ st,ext-phyclk:
+ description:
+ set this property in RMII mode when you have PHY without crystal 50MHz and want to
+ select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select
+ RCC clock instead of ETH_CLK125.
+ type: boolean
+
st,eth-clk-sel:
description:
set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
@@ -93,6 +100,10 @@ properties:
select RCC clock instead of ETH_REF_CLK.
type: boolean
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- clocks
diff --git a/dts/upstream/Bindings/net/ti,cpsw-switch.yaml b/dts/upstream/Bindings/net/ti,cpsw-switch.yaml
index d5bd93e..d14ca81 100644
--- a/dts/upstream/Bindings/net/ti,cpsw-switch.yaml
+++ b/dts/upstream/Bindings/net/ti,cpsw-switch.yaml
@@ -8,7 +8,6 @@ title: TI SoC Ethernet Switch Controller (CPSW)
maintainers:
- Siddharth Vadapalli <s-vadapalli@ti.com>
- - Ravi Gunasekaran <r-gunasekaran@ti.com>
- Roger Quadros <rogerq@kernel.org>
description:
diff --git a/dts/upstream/Bindings/net/ti,icssg-prueth.yaml b/dts/upstream/Bindings/net/ti,icssg-prueth.yaml
index 229c8f3..e253fa7 100644
--- a/dts/upstream/Bindings/net/ti,icssg-prueth.yaml
+++ b/dts/upstream/Bindings/net/ti,icssg-prueth.yaml
@@ -13,14 +13,12 @@ description:
Ethernet based on the Programmable Real-Time Unit and Industrial
Communication Subsystem.
-allOf:
- - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
-
properties:
compatible:
enum:
- - ti,am642-icssg-prueth # for AM64x SoC family
- - ti,am654-icssg-prueth # for AM65x SoC family
+ - ti,am642-icssg-prueth # for AM64x SoC family
+ - ti,am654-icssg-prueth # for AM65x SoC family
+ - ti,am654-sr1-icssg-prueth # for AM65x SoC family, SR1.0
sram:
$ref: /schemas/types.yaml#/definitions/phandle
@@ -28,9 +26,11 @@ properties:
phandle to MSMC SRAM node
dmas:
- maxItems: 10
+ minItems: 10
+ maxItems: 12
dma-names:
+ minItems: 10
items:
- const: tx0-0
- const: tx0-1
@@ -42,6 +42,8 @@ properties:
- const: tx1-3
- const: rx0
- const: rx1
+ - const: rxmgm0
+ - const: rxmgm1
ti,mii-g-rt:
$ref: /schemas/types.yaml#/definitions/phandle
@@ -132,6 +134,27 @@ required:
- interrupts
- interrupt-names
+allOf:
+ - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,am654-sr1-icssg-prueth
+ then:
+ properties:
+ dmas:
+ minItems: 12
+ dma-names:
+ minItems: 12
+ else:
+ properties:
+ dmas:
+ maxItems: 10
+ dma-names:
+ maxItems: 10
+
unevaluatedProperties: false
examples:
diff --git a/dts/upstream/Bindings/net/ti,k3-am654-cpsw-nuss.yaml b/dts/upstream/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 73ed595..02b6d32 100644
--- a/dts/upstream/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/dts/upstream/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -8,7 +8,6 @@ title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Control
maintainers:
- Siddharth Vadapalli <s-vadapalli@ti.com>
- - Ravi Gunasekaran <r-gunasekaran@ti.com>
- Roger Quadros <rogerq@kernel.org>
description:
diff --git a/dts/upstream/Bindings/net/ti,k3-am654-cpts.yaml b/dts/upstream/Bindings/net/ti,k3-am654-cpts.yaml
index b1c8753..3888692 100644
--- a/dts/upstream/Bindings/net/ti,k3-am654-cpts.yaml
+++ b/dts/upstream/Bindings/net/ti,k3-am654-cpts.yaml
@@ -8,7 +8,6 @@ title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module
maintainers:
- Siddharth Vadapalli <s-vadapalli@ti.com>
- - Ravi Gunasekaran <r-gunasekaran@ti.com>
- Roger Quadros <rogerq@kernel.org>
description: |+
diff --git a/dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml b/dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
index 4aa521f..e564f20 100644
--- a/dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/dts/upstream/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -44,6 +44,7 @@ properties:
- brcm,bcm4366-fmac
- cypress,cyw4373-fmac
- cypress,cyw43012-fmac
+ - infineon,cyw43439-fmac
- const: brcm,bcm4329-fmac
- enum:
- brcm,bcm4329-fmac
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml
index 9b3ef4b..5c4498b 100644
--- a/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml
@@ -73,6 +73,12 @@ properties:
- sky85703-11
- sky85803
+ firmware-name:
+ maxItems: 1
+ description:
+ If present, a board or platform specific string used to lookup firmware
+ files for the device.
+
wifi-firmware:
type: object
additionalProperties: false
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml
index 672282c..a2d55bf 100644
--- a/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml
@@ -59,6 +59,8 @@ properties:
minItems: 1
maxItems: 2
+ ieee80211-freq-limit: true
+
wifi-firmware:
type: object
description: |
@@ -88,6 +90,7 @@ required:
additionalProperties: false
allOf:
+ - $ref: ieee80211.yaml#
- if:
properties:
compatible:
diff --git a/dts/upstream/Bindings/nvmem/qcom,qfprom.yaml b/dts/upstream/Bindings/nvmem/qcom,qfprom.yaml
index 8c8f05d..80845c7 100644
--- a/dts/upstream/Bindings/nvmem/qcom,qfprom.yaml
+++ b/dts/upstream/Bindings/nvmem/qcom,qfprom.yaml
@@ -34,6 +34,7 @@ properties:
- qcom,qcs404-qfprom
- qcom,sc7180-qfprom
- qcom,sc7280-qfprom
+ - qcom,sc8280xp-qfprom
- qcom,sdm630-qfprom
- qcom,sdm670-qfprom
- qcom,sdm845-qfprom
@@ -42,6 +43,9 @@ properties:
- qcom,sm6375-qfprom
- qcom,sm8150-qfprom
- qcom,sm8250-qfprom
+ - qcom,sm8450-qfprom
+ - qcom,sm8550-qfprom
+ - qcom,sm8650-qfprom
- const: qcom,qfprom
reg:
diff --git a/dts/upstream/Bindings/nvmem/qcom,spmi-sdam.yaml b/dts/upstream/Bindings/nvmem/qcom,spmi-sdam.yaml
index 068bedf..5d7be0b 100644
--- a/dts/upstream/Bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/dts/upstream/Bindings/nvmem/qcom,spmi-sdam.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. SPMI SDAM
maintainers:
- - Shyam Kumar Thella <sthella@codeaurora.org>
+ - David Collins <quic_collinsd@quicinc.com>
description: |
The SDAM provides scratch register space for the PMIC clients. This
diff --git a/dts/upstream/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/dts/upstream/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index 51f62c3..ec5e424 100644
--- a/dts/upstream/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/dts/upstream/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -13,25 +13,25 @@ maintainers:
description: |
For some SoCs, the CPU frequency subset and voltage value of each
OPP varies based on the silicon variant in use. Allwinner Process
- Voltage Scaling Tables defines the voltage and frequency value based
- on the speedbin blown in the efuse combination. The
- sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
- provide the OPP framework with required information.
+ Voltage Scaling Tables define the voltage and frequency values based
+ on the speedbin blown in the efuse combination.
allOf:
- $ref: opp-v2-base.yaml#
properties:
compatible:
- const: allwinner,sun50i-h6-operating-points
+ enum:
+ - allwinner,sun50i-h6-operating-points
+ - allwinner,sun50i-h616-operating-points
nvmem-cells:
description: |
A phandle pointing to a nvmem-cells node representing the efuse
- registers that has information about the speedbin that is used
+ register that has information about the speedbin that is used
to select the right frequency/voltage value pair. Please refer
- the for nvmem-cells bindings
- Documentation/devicetree/bindings/nvmem/nvmem.txt and also
+ to the nvmem-cells bindings in
+ Documentation/devicetree/bindings/nvmem/nvmem.yaml and also the
examples below.
opp-shared: true
@@ -47,15 +47,18 @@ patternProperties:
properties:
opp-hz: true
clock-latency-ns: true
+ opp-microvolt: true
+ opp-supported-hw:
+ maxItems: 1
+ description:
+ A single 32 bit bitmap value, representing compatible HW, one
+ bit per speed bin index.
patternProperties:
"^opp-microvolt-speed[0-9]$": true
required:
- opp-hz
- - opp-microvolt-speed0
- - opp-microvolt-speed1
- - opp-microvolt-speed2
unevaluatedProperties: false
@@ -77,58 +80,54 @@ examples:
opp-microvolt-speed2 = <800000>;
};
- opp-720000000 {
+ opp-1080000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
- opp-hz = /bits/ 64 <720000000>;
+ opp-hz = /bits/ 64 <1080000000>;
- opp-microvolt-speed0 = <880000>;
- opp-microvolt-speed1 = <820000>;
- opp-microvolt-speed2 = <800000>;
+ opp-microvolt-speed0 = <1060000>;
+ opp-microvolt-speed1 = <880000>;
+ opp-microvolt-speed2 = <840000>;
};
- opp-816000000 {
+ opp-1488000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
- opp-hz = /bits/ 64 <816000000>;
+ opp-hz = /bits/ 64 <1488000000>;
- opp-microvolt-speed0 = <880000>;
- opp-microvolt-speed1 = <820000>;
- opp-microvolt-speed2 = <800000>;
+ opp-microvolt-speed0 = <1160000>;
+ opp-microvolt-speed1 = <1000000>;
+ opp-microvolt-speed2 = <960000>;
};
+ };
- opp-888000000 {
- clock-latency-ns = <244144>; /* 8 32k periods */
- opp-hz = /bits/ 64 <888000000>;
-
- opp-microvolt-speed0 = <940000>;
- opp-microvolt-speed1 = <820000>;
- opp-microvolt-speed2 = <800000>;
- };
+ - |
+ opp-table {
+ compatible = "allwinner,sun50i-h616-operating-points";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
- opp-1080000000 {
+ opp-480000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
- opp-hz = /bits/ 64 <1080000000>;
+ opp-hz = /bits/ 64 <480000000>;
- opp-microvolt-speed0 = <1060000>;
- opp-microvolt-speed1 = <880000>;
- opp-microvolt-speed2 = <840000>;
+ opp-microvolt = <900000>;
+ opp-supported-hw = <0x1f>;
};
- opp-1320000000 {
+ opp-792000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
- opp-hz = /bits/ 64 <1320000000>;
+ opp-hz = /bits/ 64 <792000000>;
- opp-microvolt-speed0 = <1160000>;
- opp-microvolt-speed1 = <940000>;
- opp-microvolt-speed2 = <900000>;
+ opp-microvolt-speed1 = <900000>;
+ opp-microvolt-speed4 = <940000>;
+ opp-supported-hw = <0x12>;
};
- opp-1488000000 {
+ opp-1512000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
- opp-hz = /bits/ 64 <1488000000>;
+ opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt-speed0 = <1160000>;
- opp-microvolt-speed1 = <1000000>;
- opp-microvolt-speed2 = <960000>;
+ opp-microvolt = <1100000>;
+ opp-supported-hw = <0x0a>;
};
};
diff --git a/dts/upstream/Bindings/pci/amlogic,axg-pcie.yaml b/dts/upstream/Bindings/pci/amlogic,axg-pcie.yaml
index a5bd90b..79a21ba 100644
--- a/dts/upstream/Bindings/pci/amlogic,axg-pcie.yaml
+++ b/dts/upstream/Bindings/pci/amlogic,axg-pcie.yaml
@@ -13,7 +13,7 @@ description:
Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- $ref: /schemas/pci/snps,dw-pcie-common.yaml#
# We need a select here so we don't match all nodes with 'snps,dw-pcie'
diff --git a/dts/upstream/Bindings/pci/apple,pcie.yaml b/dts/upstream/Bindings/pci/apple,pcie.yaml
index 215ff9a..c8775f9 100644
--- a/dts/upstream/Bindings/pci/apple,pcie.yaml
+++ b/dts/upstream/Bindings/pci/apple,pcie.yaml
@@ -85,7 +85,7 @@ required:
unevaluatedProperties: false
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
- if:
properties:
diff --git a/dts/upstream/Bindings/pci/brcm,iproc-pcie.yaml b/dts/upstream/Bindings/pci/brcm,iproc-pcie.yaml
index 0e07ab6..5434c14 100644
--- a/dts/upstream/Bindings/pci/brcm,iproc-pcie.yaml
+++ b/dts/upstream/Bindings/pci/brcm,iproc-pcie.yaml
@@ -11,7 +11,7 @@ maintainers:
- Scott Branden <scott.branden@broadcom.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/brcm,stb-pcie.yaml b/dts/upstream/Bindings/pci/brcm,stb-pcie.yaml
index 22491f7..11f8ea3 100644
--- a/dts/upstream/Bindings/pci/brcm,stb-pcie.yaml
+++ b/dts/upstream/Bindings/pci/brcm,stb-pcie.yaml
@@ -108,7 +108,7 @@ required:
- msi-controller
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
- if:
properties:
diff --git a/dts/upstream/Bindings/pci/cdns,cdns-pcie-host.yaml b/dts/upstream/Bindings/pci/cdns,cdns-pcie-host.yaml
index bc3c48f..a8190d9 100644
--- a/dts/upstream/Bindings/pci/cdns,cdns-pcie-host.yaml
+++ b/dts/upstream/Bindings/pci/cdns,cdns-pcie-host.yaml
@@ -10,7 +10,6 @@ maintainers:
- Tom Joseph <tjoseph@cadence.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
- $ref: cdns-pcie-host.yaml#
properties:
@@ -25,8 +24,6 @@ properties:
- const: reg
- const: cfg
- msi-parent: true
-
required:
- reg
- reg-names
diff --git a/dts/upstream/Bindings/pci/cdns-pcie-host.yaml b/dts/upstream/Bindings/pci/cdns-pcie-host.yaml
index a6b4944..f4eb82e 100644
--- a/dts/upstream/Bindings/pci/cdns-pcie-host.yaml
+++ b/dts/upstream/Bindings/pci/cdns-pcie-host.yaml
@@ -10,7 +10,7 @@ maintainers:
- Tom Joseph <tjoseph@cadence.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- $ref: cdns-pcie.yaml#
properties:
diff --git a/dts/upstream/Bindings/pci/faraday,ftpci100.yaml b/dts/upstream/Bindings/pci/faraday,ftpci100.yaml
index 92efbf0..378dd1c 100644
--- a/dts/upstream/Bindings/pci/faraday,ftpci100.yaml
+++ b/dts/upstream/Bindings/pci/faraday,ftpci100.yaml
@@ -51,7 +51,7 @@ description: |
<0x6000 0 0 4 &pci_intc 2>;
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/fsl,layerscape-pcie-ep.yaml b/dts/upstream/Bindings/pci/fsl,layerscape-pcie-ep.yaml
new file mode 100644
index 0000000..399efa7
--- /dev/null
+++ b/dts/upstream/Bindings/pci/fsl,layerscape-pcie-ep.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Endpoint(EP) controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ This PCIe EP controller is based on the Synopsys DesignWare PCIe IP.
+
+ This controller derives its clocks from the Reset Configuration Word (RCW)
+ which is used to describe the PLL settings at the time of chip-reset.
+
+ Also as per the available Reference Manuals, there is no specific 'version'
+ register available in the Freescale PCIe controller register set,
+ which can allow determining the underlying DesignWare PCIe controller version
+ information.
+
+properties:
+ compatible:
+ enum:
+ - fsl,ls2088a-pcie-ep
+ - fsl,ls1088a-pcie-ep
+ - fsl,ls1046a-pcie-ep
+ - fsl,ls1028a-pcie-ep
+ - fsl,lx2160ar2-pcie-ep
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: regs
+ - const: addr_space
+
+ fsl,pcie-scfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to the SCFG device node. The second entry is the
+ physical PCIe controller index starting from '0'. This is used to get
+ SCFG PEXN registers.
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: If the PEX_LUT and PF register block is in big-endian, specify
+ this property.
+
+ dma-coherent: true
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,ls1028a-pcie-ep
+ - fsl,ls1046a-pcie-ep
+ - fsl,ls1088a-pcie-ep
+ then:
+ properties:
+ interrupt-names:
+ items:
+ - const: pme
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie_ep1: pcie-ep@3400000 {
+ compatible = "fsl,ls1028a-pcie-ep";
+ reg = <0x00 0x03400000 0x0 0x00100000
+ 0x80 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+ interrupt-names = "pme";
+ num-ib-windows = <6>;
+ num-ob-windows = <8>;
+ status = "disabled";
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/pci/fsl,layerscape-pcie.yaml b/dts/upstream/Bindings/pci/fsl,layerscape-pcie.yaml
new file mode 100644
index 0000000..793986c
--- /dev/null
+++ b/dts/upstream/Bindings/pci/fsl,layerscape-pcie.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Root Complex(RC) controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ This PCIe RC controller is based on the Synopsys DesignWare PCIe IP
+
+ This controller derives its clocks from the Reset Configuration Word (RCW)
+ which is used to describe the PLL settings at the time of chip-reset.
+
+ Also as per the available Reference Manuals, there is no specific 'version'
+ register available in the Freescale PCIe controller register set,
+ which can allow determining the underlying DesignWare PCIe controller version
+ information.
+
+properties:
+ compatible:
+ enum:
+ - fsl,ls1021a-pcie
+ - fsl,ls2080a-pcie
+ - fsl,ls2085a-pcie
+ - fsl,ls2088a-pcie
+ - fsl,ls1088a-pcie
+ - fsl,ls1046a-pcie
+ - fsl,ls1043a-pcie
+ - fsl,ls1012a-pcie
+ - fsl,ls1028a-pcie
+ - fsl,lx2160a-pcie
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: regs
+ - const: config
+
+ fsl,pcie-scfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to the SCFG device node. The second entry is the
+ physical PCIe controller index starting from '0'. This is used to get
+ SCFG PEXN registers.
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: If the PEX_LUT and PF register block is in big-endian, specify
+ this property.
+
+ dma-coherent: true
+
+ msi-parent: true
+
+ iommu-map: true
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - "#address-cells"
+ - "#size-cells"
+ - device_type
+ - bus-range
+ - ranges
+ - interrupts
+ - interrupt-names
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,ls1028a-pcie
+ - fsl,ls1046a-pcie
+ - fsl,ls1043a-pcie
+ - fsl,ls1012a-pcie
+ then:
+ properties:
+ interrupts:
+ maxItems: 2
+ interrupt-names:
+ items:
+ - const: pme
+ - const: aer
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,ls2080a-pcie
+ - fsl,ls2085a-pcie
+ - fsl,ls2088a-pcie
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: intr
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,ls1088a-pcie
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: aer
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@3400000 {
+ compatible = "fsl,ls1088a-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ device_type = "pci";
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+ iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/pci/host-generic-pci.yaml b/dts/upstream/Bindings/pci/host-generic-pci.yaml
index d25423a..3484e0b 100644
--- a/dts/upstream/Bindings/pci/host-generic-pci.yaml
+++ b/dts/upstream/Bindings/pci/host-generic-pci.yaml
@@ -116,7 +116,7 @@ required:
- ranges
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- if:
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/intel,ixp4xx-pci.yaml b/dts/upstream/Bindings/pci/intel,ixp4xx-pci.yaml
index debfb54..3cae2e0 100644
--- a/dts/upstream/Bindings/pci/intel,ixp4xx-pci.yaml
+++ b/dts/upstream/Bindings/pci/intel,ixp4xx-pci.yaml
@@ -12,7 +12,7 @@ maintainers:
description: PCI host controller found in the Intel IXP4xx SoC series.
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/intel,keembay-pcie.yaml b/dts/upstream/Bindings/pci/intel,keembay-pcie.yaml
index 505acc4..1fd5575 100644
--- a/dts/upstream/Bindings/pci/intel,keembay-pcie.yaml
+++ b/dts/upstream/Bindings/pci/intel,keembay-pcie.yaml
@@ -11,7 +11,7 @@ maintainers:
- Srikanth Thokala <srikanth.thokala@intel.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/layerscape-pci.txt b/dts/upstream/Bindings/pci/layerscape-pci.txt
deleted file mode 100644
index ee8a479..0000000
--- a/dts/upstream/Bindings/pci/layerscape-pci.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-Freescale Layerscape PCIe controller
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in snps,dw-pcie.yaml.
-
-This controller derives its clocks from the Reset Configuration Word (RCW)
-which is used to describe the PLL settings at the time of chip-reset.
-
-Also as per the available Reference Manuals, there is no specific 'version'
-register available in the Freescale PCIe controller register set,
-which can allow determining the underlying DesignWare PCIe controller version
-information.
-
-Required properties:
-- compatible: should contain the platform identifier such as:
- RC mode:
- "fsl,ls1021a-pcie"
- "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
- "fsl,ls2088a-pcie"
- "fsl,ls1088a-pcie"
- "fsl,ls1046a-pcie"
- "fsl,ls1043a-pcie"
- "fsl,ls1012a-pcie"
- "fsl,ls1028a-pcie"
- EP mode:
- "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
- "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
- "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
- "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
- "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
-- reg: base addresses and lengths of the PCIe controller register blocks.
-- interrupts: A list of interrupt outputs of the controller. Must contain an
- entry for each entry in the interrupt-names property.
-- interrupt-names: It could include the following entries:
- "aer": Used for interrupt line which reports AER events when
- non MSI/MSI-X/INTx mode is used
- "pme": Used for interrupt line which reports PME events when
- non MSI/MSI-X/INTx mode is used
- "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
- which has a single interrupt line for miscellaneous controller
- events(could include AER and PME events).
-- fsl,pcie-scfg: Must include two entries.
- The first entry must be a link to the SCFG device node
- The second entry is the physical PCIe controller index starting from '0'.
- This is used to get SCFG PEXN registers
-- dma-coherent: Indicates that the hardware IP block can ensure the coherency
- of the data transferred from/to the IP block. This can avoid the software
- cache flush/invalid actions, and improve the performance significantly.
-
-Optional properties:
-- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
- this property.
-
-Example:
-
- pcie@3400000 {
- compatible = "fsl,ls1088a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
- <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
- interrupt-names = "aer";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-viewport = <256>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
- iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
- };
diff --git a/dts/upstream/Bindings/pci/loongson.yaml b/dts/upstream/Bindings/pci/loongson.yaml
index a8324a9..1988465 100644
--- a/dts/upstream/Bindings/pci/loongson.yaml
+++ b/dts/upstream/Bindings/pci/loongson.yaml
@@ -13,7 +13,7 @@ description: |+
PCI host controller found on Loongson PCHs and SoCs.
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml b/dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml
index e63e645..6fba421 100644
--- a/dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml
+++ b/dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml
@@ -14,7 +14,7 @@ description: |+
with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
@@ -33,9 +33,12 @@ properties:
patternProperties:
'^pcie@[0-2],0$':
type: object
- $ref: /schemas/pci/pci-bus.yaml#
+ $ref: /schemas/pci/pci-pci-bridge.yaml#
properties:
+ reg:
+ maxItems: 1
+
resets:
maxItems: 1
diff --git a/dts/upstream/Bindings/pci/mediatek-pcie-gen3.yaml b/dts/upstream/Bindings/pci/mediatek-pcie-gen3.yaml
index 7e8c7a2..76d7420 100644
--- a/dts/upstream/Bindings/pci/mediatek-pcie-gen3.yaml
+++ b/dts/upstream/Bindings/pci/mediatek-pcie-gen3.yaml
@@ -140,7 +140,7 @@ required:
- interrupt-controller
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- if:
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/microchip,pcie-host.yaml b/dts/upstream/Bindings/pci/microchip,pcie-host.yaml
index f7a3c26..5d7aec5 100644
--- a/dts/upstream/Bindings/pci/microchip,pcie-host.yaml
+++ b/dts/upstream/Bindings/pci/microchip,pcie-host.yaml
@@ -10,7 +10,7 @@ maintainers:
- Daire McNamara <daire.mcnamara@microchip.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
properties:
@@ -65,7 +65,8 @@ properties:
- const: msi
ranges:
- maxItems: 1
+ minItems: 1
+ maxItems: 3
dma-ranges:
minItems: 1
diff --git a/dts/upstream/Bindings/pci/qcom,pcie-common.yaml b/dts/upstream/Bindings/pci/qcom,pcie-common.yaml
index 0d1b235..0a39bbf 100644
--- a/dts/upstream/Bindings/pci/qcom,pcie-common.yaml
+++ b/dts/upstream/Bindings/pci/qcom,pcie-common.yaml
@@ -95,6 +95,6 @@ anyOf:
- msi-map
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
additionalProperties: true
diff --git a/dts/upstream/Bindings/pci/qcom,pcie-sm8350.yaml b/dts/upstream/Bindings/pci/qcom,pcie-sm8350.yaml
index 9eb6e45..2a4cc41 100644
--- a/dts/upstream/Bindings/pci/qcom,pcie-sm8350.yaml
+++ b/dts/upstream/Bindings/pci/qcom,pcie-sm8350.yaml
@@ -71,28 +71,6 @@ properties:
items:
- const: pci
-oneOf:
- - properties:
- interrupts:
- maxItems: 1
- interrupt-names:
- items:
- - const: msi
-
- - properties:
- interrupts:
- minItems: 8
- interrupt-names:
- items:
- - const: msi0
- - const: msi1
- - const: msi2
- - const: msi3
- - const: msi4
- - const: msi5
- - const: msi6
- - const: msi7
-
allOf:
- $ref: qcom,pcie-common.yaml#
diff --git a/dts/upstream/Bindings/pci/qcom,pcie.yaml b/dts/upstream/Bindings/pci/qcom,pcie.yaml
index cf9a691..f867746 100644
--- a/dts/upstream/Bindings/pci/qcom,pcie.yaml
+++ b/dts/upstream/Bindings/pci/qcom,pcie.yaml
@@ -130,7 +130,7 @@ anyOf:
- msi-map
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- if:
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/rcar-gen4-pci-ep.yaml b/dts/upstream/Bindings/pci/rcar-gen4-pci-ep.yaml
index fe38f62..91b81ac 100644
--- a/dts/upstream/Bindings/pci/rcar-gen4-pci-ep.yaml
+++ b/dts/upstream/Bindings/pci/rcar-gen4-pci-ep.yaml
@@ -16,7 +16,9 @@ allOf:
properties:
compatible:
items:
- - const: renesas,r8a779f0-pcie-ep # R-Car S4-8
+ - enum:
+ - renesas,r8a779f0-pcie-ep # R-Car S4-8
+ - renesas,r8a779g0-pcie-ep # R-Car V4H
- const: renesas,rcar-gen4-pcie-ep # R-Car Gen4
reg:
diff --git a/dts/upstream/Bindings/pci/rcar-gen4-pci-host.yaml b/dts/upstream/Bindings/pci/rcar-gen4-pci-host.yaml
index ffb3433..955c664 100644
--- a/dts/upstream/Bindings/pci/rcar-gen4-pci-host.yaml
+++ b/dts/upstream/Bindings/pci/rcar-gen4-pci-host.yaml
@@ -16,7 +16,9 @@ allOf:
properties:
compatible:
items:
- - const: renesas,r8a779f0-pcie # R-Car S4-8
+ - enum:
+ - renesas,r8a779f0-pcie # R-Car S4-8
+ - renesas,r8a779g0-pcie # R-Car V4H
- const: renesas,rcar-gen4-pcie # R-Car Gen4
reg:
diff --git a/dts/upstream/Bindings/pci/rcar-pci-host.yaml b/dts/upstream/Bindings/pci/rcar-pci-host.yaml
index b6a7cb3..666f013 100644
--- a/dts/upstream/Bindings/pci/rcar-pci-host.yaml
+++ b/dts/upstream/Bindings/pci/rcar-pci-host.yaml
@@ -12,7 +12,7 @@ maintainers:
- Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
allOf:
- - $ref: pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
@@ -77,6 +77,9 @@ properties:
vpcie12v-supply:
description: The 12v regulator to use for PCIe.
+ iommu-map: true
+ iommu-map-mask: true
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/pci/renesas,pci-rcar-gen2.yaml b/dts/upstream/Bindings/pci/renesas,pci-rcar-gen2.yaml
index 5a0d64d..b288cdb 100644
--- a/dts/upstream/Bindings/pci/renesas,pci-rcar-gen2.yaml
+++ b/dts/upstream/Bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -110,7 +110,7 @@ required:
- "#interrupt-cells"
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- if:
properties:
diff --git a/dts/upstream/Bindings/pci/rockchip,rk3399-pcie.yaml b/dts/upstream/Bindings/pci/rockchip,rk3399-pcie.yaml
index 531008f..720a5f9 100644
--- a/dts/upstream/Bindings/pci/rockchip,rk3399-pcie.yaml
+++ b/dts/upstream/Bindings/pci/rockchip,rk3399-pcie.yaml
@@ -10,7 +10,7 @@ maintainers:
- Shawn Lin <shawn.lin@rock-chips.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- $ref: rockchip,rk3399-pcie-common.yaml#
properties:
@@ -37,6 +37,7 @@ properties:
description: This property is needed if using 24MHz OSC for RC's PHY.
ep-gpios:
+ maxItems: 1
description: pre-reset GPIO
vpcie12v-supply:
diff --git a/dts/upstream/Bindings/pci/snps,dw-pcie.yaml b/dts/upstream/Bindings/pci/snps,dw-pcie.yaml
index 022055e..548f59d 100644
--- a/dts/upstream/Bindings/pci/snps,dw-pcie.yaml
+++ b/dts/upstream/Bindings/pci/snps,dw-pcie.yaml
@@ -23,7 +23,7 @@ select:
- compatible
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- $ref: /schemas/pci/snps,dw-pcie-common.yaml#
- if:
not:
diff --git a/dts/upstream/Bindings/pci/ti,am65-pci-host.yaml b/dts/upstream/Bindings/pci/ti,am65-pci-host.yaml
index a20dccb..0a9d105 100644
--- a/dts/upstream/Bindings/pci/ti,am65-pci-host.yaml
+++ b/dts/upstream/Bindings/pci/ti,am65-pci-host.yaml
@@ -11,7 +11,7 @@ maintainers:
- Kishon Vijay Abraham I <kishon@ti.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
@@ -55,6 +55,20 @@ properties:
dma-coherent: true
+ num-viewport:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ phys:
+ description: per-lane PHYs
+ minItems: 1
+ maxItems: 2
+
+ phy-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ pattern: '^pcie-phy[0-1]$'
+
required:
- compatible
- reg
@@ -74,6 +88,7 @@ then:
- dma-coherent
- power-domains
- msi-map
+ - num-viewport
unevaluatedProperties: false
@@ -81,6 +96,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/phy/phy.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
pcie0_rc: pcie@5500000 {
@@ -98,9 +114,13 @@ examples:
ti,syscon-pcie-id = <&scm_conf 0x0210>;
ti,syscon-pcie-mode = <&scm_conf 0x4060>;
bus-range = <0x0 0xff>;
+ num-viewport = <16>;
max-link-speed = <2>;
dma-coherent;
interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
msi-map = <0x0 &gic_its 0x0 0x10000>;
device_type = "pci";
+ num-lanes = <1>;
+ phys = <&serdes0 PHY_TYPE_PCIE 0>;
+ phy-names = "pcie-phy0";
};
diff --git a/dts/upstream/Bindings/pci/ti,j721e-pci-host.yaml b/dts/upstream/Bindings/pci/ti,j721e-pci-host.yaml
index b7a534c..15a2658 100644
--- a/dts/upstream/Bindings/pci/ti,j721e-pci-host.yaml
+++ b/dts/upstream/Bindings/pci/ti,j721e-pci-host.yaml
@@ -23,6 +23,10 @@ properties:
items:
- const: ti,j7200-pcie-host
- const: ti,j721e-pcie-host
+ - description: PCIe controller in J722S
+ items:
+ - const: ti,j722s-pcie-host
+ - const: ti,j721e-pcie-host
reg:
maxItems: 4
@@ -68,6 +72,7 @@ properties:
- 0xb00d
- 0xb00f
- 0xb010
+ - 0xb012
- 0xb013
msi-map: true
diff --git a/dts/upstream/Bindings/pci/versatile.yaml b/dts/upstream/Bindings/pci/versatile.yaml
index 09748ef..294c7cd 100644
--- a/dts/upstream/Bindings/pci/versatile.yaml
+++ b/dts/upstream/Bindings/pci/versatile.yaml
@@ -13,7 +13,7 @@ description: |+
PCI host controller found on the ARM Versatile PB board's FPGA.
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml b/dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml
index 4734be4..4770ce0 100644
--- a/dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml
+++ b/dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml
@@ -10,7 +10,7 @@ maintainers:
- Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
@@ -48,13 +48,16 @@ properties:
interrupt-controller:
description: Interrupt controller node for handling legacy PCI interrupts.
type: object
+ additionalProperties: false
+
properties:
"#address-cells":
const: 0
+
"#interrupt-cells":
const: 1
- "interrupt-controller": true
- additionalProperties: false
+
+ interrupt-controller: true
required:
- reg
diff --git a/dts/upstream/Bindings/pci/xlnx,axi-pcie-host.yaml b/dts/upstream/Bindings/pci/xlnx,axi-pcie-host.yaml
index 69b7dec..fb87b96 100644
--- a/dts/upstream/Bindings/pci/xlnx,axi-pcie-host.yaml
+++ b/dts/upstream/Bindings/pci/xlnx,axi-pcie-host.yaml
@@ -10,7 +10,7 @@ maintainers:
- Thippeswamy Havalige <thippeswamy.havalige@amd.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/pci/xlnx,nwl-pcie.yaml b/dts/upstream/Bindings/pci/xlnx,nwl-pcie.yaml
index 426f90a..9cad860 100644
--- a/dts/upstream/Bindings/pci/xlnx,nwl-pcie.yaml
+++ b/dts/upstream/Bindings/pci/xlnx,nwl-pcie.yaml
@@ -10,7 +10,7 @@ maintainers:
- Thippeswamy Havalige <thippeswamy.havalige@amd.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
properties:
@@ -84,7 +84,7 @@ properties:
"#interrupt-cells":
const: 1
- "interrupt-controller": true
+ interrupt-controller: true
required:
- "#address-cells"
diff --git a/dts/upstream/Bindings/pci/xlnx,xdma-host.yaml b/dts/upstream/Bindings/pci/xlnx,xdma-host.yaml
index 0aa00b8..2f59b3a 100644
--- a/dts/upstream/Bindings/pci/xlnx,xdma-host.yaml
+++ b/dts/upstream/Bindings/pci/xlnx,xdma-host.yaml
@@ -10,7 +10,7 @@ maintainers:
- Thippeswamy Havalige <thippeswamy.havalige@amd.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
properties:
compatible:
diff --git a/dts/upstream/Bindings/phy/brcm,sata-phy.yaml b/dts/upstream/Bindings/phy/brcm,sata-phy.yaml
index 8467c8e..439bda1 100644
--- a/dts/upstream/Bindings/phy/brcm,sata-phy.yaml
+++ b/dts/upstream/Bindings/phy/brcm,sata-phy.yaml
@@ -59,14 +59,14 @@ patternProperties:
"#phy-cells":
const: 0
- "brcm,enable-ssc":
+ brcm,enable-ssc:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Use spread spectrum clocking (SSC) on this port
This property is not applicable for "brcm,iproc-ns2-sata-phy",
"brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
- "brcm,rxaeq-mode":
+ brcm,rxaeq-mode:
$ref: /schemas/types.yaml#/definitions/string
description:
String that indicates the desired RX equalizer mode.
@@ -75,7 +75,7 @@ patternProperties:
- auto
- manual
- "brcm,rxaeq-value":
+ brcm,rxaeq-value:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
When 'brcm,rxaeq-mode' is set to "manual", provides the RX
@@ -83,7 +83,7 @@ patternProperties:
minimum: 0
maximum: 63
- "brcm,tx-amplitude-millivolt":
+ brcm,tx-amplitude-millivolt:
description: |
Transmit amplitude voltage in millivolt.
$ref: /schemas/types.yaml#/definitions/uint32
diff --git a/dts/upstream/Bindings/phy/fsl,imx8mp-hdmi-phy.yaml b/dts/upstream/Bindings/phy/fsl,imx8mp-hdmi-phy.yaml
new file mode 100644
index 0000000..c43e86a
--- /dev/null
+++ b/dts/upstream/Bindings/phy/fsl,imx8mp-hdmi-phy.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8mp-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI PHY
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mp-hdmi-phy
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 0
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: apb
+ - const: ref
+
+ "#phy-cells":
+ const: 0
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - clocks
+ - clock-names
+ - "#phy-cells"
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+ #include <dt-bindings/power/imx8mp-power.h>
+
+ phy@32fdff00 {
+ compatible = "fsl,imx8mp-hdmi-phy";
+ reg = <0x32fdff00 0x100>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_24M>;
+ clock-names = "apb", "ref";
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
diff --git a/dts/upstream/Bindings/phy/mediatek,mt7988-xfi-tphy.yaml b/dts/upstream/Bindings/phy/mediatek,mt7988-xfi-tphy.yaml
new file mode 100644
index 0000000..cfb3ca9
--- /dev/null
+++ b/dts/upstream/Bindings/phy/mediatek,mt7988-xfi-tphy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt7988-xfi-tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 XFI T-PHY
+
+maintainers:
+ - Daniel Golle <daniel@makrotopia.org>
+
+description:
+ The MediaTek XFI SerDes T-PHY provides the physical SerDes lanes
+ used by the (10G/5G) USXGMII PCS and (1G/2.5G) LynxI PCS found in
+ MediaTek's 10G-capabale MT7988 SoC.
+ In MediaTek's SDK sources, this unit is referred to as "pextp".
+
+properties:
+ compatible:
+ const: mediatek,mt7988-xfi-tphy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XFI PHY clock
+ - description: XFI register clock
+
+ clock-names:
+ items:
+ - const: xfipll
+ - const: topxtal
+
+ resets:
+ items:
+ - description: Reset controller corresponding to the phy instance.
+
+ mediatek,usxgmii-performance-errata:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ One instance of the T-PHY on MT7988 suffers from a performance
+ problem in 10GBase-R mode which needs a work-around in the driver.
+ This flag enables a work-around ajusting an analog phy setting and
+ is required for XFI Port0 of the MT7988 SoC to be in compliance with
+ the SFP specification.
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mediatek,mt7988-clk.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ phy@11f20000 {
+ compatible = "mediatek,mt7988-xfi-tphy";
+ reg = <0 0x11f20000 0 0x10000>;
+ clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+ <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+ clock-names = "xfipll", "topxtal";
+ resets = <&watchdog 14>;
+ mediatek,usxgmii-performance-errata;
+ #phy-cells = <0>;
+ };
+ };
+
+...
diff --git a/dts/upstream/Bindings/phy/phy-rockchip-usbdp.yaml b/dts/upstream/Bindings/phy/phy-rockchip-usbdp.yaml
new file mode 100644
index 0000000..1f1f886
--- /dev/null
+++ b/dts/upstream/Bindings/phy/phy-rockchip-usbdp.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USBDP Combo PHY with Samsung IP block
+
+maintainers:
+ - Frank Wang <frank.wang@rock-chips.com>
+ - Zhang Yubing <yubing.zhang@rock-chips.com>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3588-usbdp-phy
+
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ description: |
+ Cell allows setting the type of the PHY. Possible values are:
+ - PHY_TYPE_USB3
+ - PHY_TYPE_DP
+ const: 1
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: refclk
+ - const: immortal
+ - const: pclk
+ - const: utmi
+
+ resets:
+ maxItems: 5
+
+ reset-names:
+ items:
+ - const: init
+ - const: cmn
+ - const: lane
+ - const: pcs_apb
+ - const: pma_apb
+
+ rockchip,dp-lane-mux:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 4
+ items:
+ maximum: 3
+ description:
+ An array of physical Type-C lanes indexes. Position of an entry
+ determines the DisplayPort (DP) lane index, while the value of an entry
+ indicates physical Type-C lane. The supported DP lanes number are 2 or 4.
+ e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2,
+ 3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy
+ lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux =
+ <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C
+ phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3. If
+ DP lanes are mapped by DisplayPort Alt mode, this property is not needed.
+
+ rockchip,u2phy-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usb2 phy general register files'.
+
+ rockchip,usb-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usb general register files'.
+
+ rockchip,usbdpphy-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usbdp phy general register files'.
+
+ rockchip,vo-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'video output general register files'.
+ When select the DP lane mapping will request its phandle.
+
+ sbu1-dc-gpios:
+ description:
+ GPIO connected to the SBU1 line of the USB-C connector via a big resistor
+ (~100K) to apply a DC offset for signalling the connector orientation.
+ maxItems: 1
+
+ sbu2-dc-gpios:
+ description:
+ GPIO connected to the SBU2 line of the USB-C connector via a big resistor
+ (~100K) to apply a DC offset for signalling the connector orientation.
+ maxItems: 1
+
+ orientation-switch:
+ description: Flag the port as possible handler of orientation switching
+ type: boolean
+
+ mode-switch:
+ description: Flag the port as possible handler of altmode switching
+ type: boolean
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the PHY to a TypeC controller for the purpose of
+ handling orientation switching.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+ #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+ usbdp_phy0: phy@fed80000 {
+ compatible = "rockchip,rk3588-usbdp-phy";
+ reg = <0xfed80000 0x10000>;
+ #phy-cells = <1>;
+ clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+ <&cru CLK_USBDP_PHY0_IMMORTAL>,
+ <&cru PCLK_USBDPPHY0>,
+ <&u2phy0>;
+ clock-names = "refclk", "immortal", "pclk", "utmi";
+ resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
+ <&cru SRST_USBDP_COMBO_PHY0_CMN>,
+ <&cru SRST_USBDP_COMBO_PHY0_LANE>,
+ <&cru SRST_USBDP_COMBO_PHY0_PCS>,
+ <&cru SRST_P_USBDPPHY0>;
+ reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+ rockchip,u2phy-grf = <&usb2phy0_grf>;
+ rockchip,usb-grf = <&usb_grf>;
+ rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
+ rockchip,vo-grf = <&vo0_grf>;
+ };
diff --git a/dts/upstream/Bindings/phy/phy-stm32-usbphyc.yaml b/dts/upstream/Bindings/phy/phy-stm32-usbphyc.yaml
index 24a3dbd..ceea122 100644
--- a/dts/upstream/Bindings/phy/phy-stm32-usbphyc.yaml
+++ b/dts/upstream/Bindings/phy/phy-stm32-usbphyc.yaml
@@ -55,6 +55,10 @@ properties:
description: number of clock cells for ck_usbo_48m consumer
const: 0
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
# Required child nodes:
patternProperties:
diff --git a/dts/upstream/Bindings/phy/qcom,edp-phy.yaml b/dts/upstream/Bindings/phy/qcom,edp-phy.yaml
index 6566353..4e15d90 100644
--- a/dts/upstream/Bindings/phy/qcom,edp-phy.yaml
+++ b/dts/upstream/Bindings/phy/qcom,edp-phy.yaml
@@ -21,6 +21,7 @@ properties:
- qcom,sc8180x-edp-phy
- qcom,sc8280xp-dp-phy
- qcom,sc8280xp-edp-phy
+ - qcom,x1e80100-dp-phy
reg:
items:
diff --git a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index ba966a7..16634f7 100644
--- a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -88,11 +88,11 @@ properties:
- description: offset of PCIe 4-lane configuration register
- description: offset of configuration bit for this PHY
- "#clock-cells":
- const: 0
+ "#clock-cells": true
clock-output-names:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
"#phy-cells":
const: 0
@@ -198,7 +198,6 @@ allOf:
enum:
- qcom,sm8550-qmp-gen4x2-pcie-phy
- qcom,sm8650-qmp-gen4x2-pcie-phy
- - qcom,x1e80100-qmp-gen3x2-pcie-phy
- qcom,x1e80100-qmp-gen4x2-pcie-phy
then:
properties:
@@ -213,6 +212,27 @@ allOf:
reset-names:
maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8450-qmp-gen4x2-pcie-phy
+ - qcom,sm8550-qmp-gen4x2-pcie-phy
+ - qcom,sm8650-qmp-gen4x2-pcie-phy
+ then:
+ properties:
+ clock-output-names:
+ minItems: 2
+ "#clock-cells":
+ const: 1
+ else:
+ properties:
+ clock-output-names:
+ maxItems: 1
+ "#clock-cells":
+ const: 0
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
diff --git a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 91a6cc3..f9cfbd0 100644
--- a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -32,6 +32,7 @@ properties:
- qcom,sm8250-qmp-ufs-phy
- qcom,sm8350-qmp-ufs-phy
- qcom,sm8450-qmp-ufs-phy
+ - qcom,sm8475-qmp-ufs-phy
- qcom,sm8550-qmp-ufs-phy
- qcom,sm8650-qmp-ufs-phy
@@ -71,7 +72,6 @@ required:
- reg
- clocks
- clock-names
- - power-domains
- resets
- reset-names
- vdda-phy-supply
@@ -86,6 +86,7 @@ allOf:
enum:
- qcom,msm8998-qmp-ufs-phy
- qcom,sa8775p-qmp-ufs-phy
+ - qcom,sc7180-qmp-ufs-phy
- qcom,sc7280-qmp-ufs-phy
- qcom,sc8180x-qmp-ufs-phy
- qcom,sc8280xp-qmp-ufs-phy
@@ -98,6 +99,7 @@ allOf:
- qcom,sm8250-qmp-ufs-phy
- qcom,sm8350-qmp-ufs-phy
- qcom,sm8450-qmp-ufs-phy
+ - qcom,sm8475-qmp-ufs-phy
- qcom,sm8550-qmp-ufs-phy
- qcom,sm8650-qmp-ufs-phy
then:
@@ -127,6 +129,21 @@ allOf:
- const: ref
- const: qref
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8996-qmp-ufs-phy
+ - qcom,msm8998-qmp-ufs-phy
+ then:
+ properties:
+ power-domains:
+ false
+ else:
+ required:
+ - power-domains
+
additionalProperties: false
examples:
diff --git a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 1e2d4dd..325585b 100644
--- a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,6 +20,7 @@ properties:
- qcom,ipq8074-qmp-usb3-phy
- qcom,ipq9574-qmp-usb3-phy
- qcom,msm8996-qmp-usb3-phy
+ - com,qdu1000-qmp-usb3-uni-phy
- qcom,sa8775p-qmp-usb3-uni-phy
- qcom,sc8280xp-qmp-usb3-uni-phy
- qcom,sdm845-qmp-usb3-uni-phy
@@ -109,6 +110,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,qdu1000-qmp-usb3-uni-phy
- qcom,sa8775p-qmp-usb3-uni-phy
- qcom,sc8280xp-qmp-usb3-uni-phy
- qcom,sm8150-qmp-usb3-uni-phy
diff --git a/dts/upstream/Bindings/phy/qcom,snps-eusb2-repeater.yaml b/dts/upstream/Bindings/phy/qcom,snps-eusb2-repeater.yaml
index 24c733c..90d7949 100644
--- a/dts/upstream/Bindings/phy/qcom,snps-eusb2-repeater.yaml
+++ b/dts/upstream/Bindings/phy/qcom,snps-eusb2-repeater.yaml
@@ -20,7 +20,9 @@ properties:
- enum:
- qcom,pm7550ba-eusb2-repeater
- const: qcom,pm8550b-eusb2-repeater
- - const: qcom,pm8550b-eusb2-repeater
+ - enum:
+ - qcom,pm8550b-eusb2-repeater
+ - qcom,smb2360-eusb2-repeater
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/phy/qcom,usb-snps-femto-v2.yaml b/dts/upstream/Bindings/phy/qcom,usb-snps-femto-v2.yaml
index 0f200e3..519c2b4 100644
--- a/dts/upstream/Bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/dts/upstream/Bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -15,9 +15,6 @@ description: |
properties:
compatible:
oneOf:
- - enum:
- - qcom,sc8180x-usb-hs-phy
- - qcom,usb-snps-femto-v2-phy
- items:
- enum:
- qcom,sa8775p-usb-hs-phy
@@ -25,7 +22,9 @@ properties:
- const: qcom,usb-snps-hs-5nm-phy
- items:
- enum:
+ - qcom,qdu1000-usb-hs-phy
- qcom,sc7280-usb-hs-phy
+ - qcom,sc8180x-usb-hs-phy
- qcom,sdx55-usb-hs-phy
- qcom,sdx65-usb-hs-phy
- qcom,sm6375-usb-hs-phy
diff --git a/dts/upstream/Bindings/phy/rockchip,pcie3-phy.yaml b/dts/upstream/Bindings/phy/rockchip,pcie3-phy.yaml
index c4fbffc..ba67dca 100644
--- a/dts/upstream/Bindings/phy/rockchip,pcie3-phy.yaml
+++ b/dts/upstream/Bindings/phy/rockchip,pcie3-phy.yaml
@@ -54,6 +54,16 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the syscon managing the pipe "general register files"
+ rockchip,rx-common-refclk-mode:
+ description: which lanes (by position) should be configured to run in
+ RX common reference clock mode. 0 means disabled, 1 means enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 16
+ items:
+ minimum: 0
+ maximum: 1
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/phy/samsung,ufs-phy.yaml b/dts/upstream/Bindings/phy/samsung,ufs-phy.yaml
index 782f975..f402e31 100644
--- a/dts/upstream/Bindings/phy/samsung,ufs-phy.yaml
+++ b/dts/upstream/Bindings/phy/samsung,ufs-phy.yaml
@@ -15,6 +15,7 @@ properties:
compatible:
enum:
+ - google,gs101-ufs-phy
- samsung,exynos7-ufs-phy
- samsung,exynosautov9-ufs-phy
- tesla,fsd-ufs-phy
diff --git a/dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index bd72a32..d74cae9 100644
--- a/dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -34,6 +34,9 @@ properties:
the amount of cells must be specified as 2. See the below mentioned gpio
binding representation for description of particular cells.
+ gpio-ranges:
+ maxItems: 1
+
interrupt-controller: true
interrupts:
@@ -75,8 +78,8 @@ patternProperties:
function:
description:
A string containing the name of the function to mux to the group.
- enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
- spi, tdm, uart, watchdog, wifi]
+ enum: [antsel, emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm,
+ sd, spi, tdm, uart, watchdog, wifi]
groups:
description:
@@ -93,11 +96,26 @@ patternProperties:
- if:
properties:
function:
+ const: antsel
+ then:
+ properties:
+ groups:
+ items:
+ enum: [antsel0, antsel1, antsel2, antsel3, antsel4, antsel5,
+ antsel6, antsel7, antsel8, antsel9, antsel10,
+ antsel11, antsel12, antsel13, antsel14, antsel15,
+ antsel16, antsel17, antsel18, antsel19, antsel20,
+ antsel21, antsel22, antsel23, antsel24, antsel25,
+ antsel26, antsel27, antsel28, antsel29]
+ - if:
+ properties:
+ function:
const: emmc
then:
properties:
groups:
- enum: [emmc, emmc_rst]
+ items:
+ enum: [emmc, emmc_rst]
- if:
properties:
function:
@@ -105,8 +123,9 @@ patternProperties:
then:
properties:
groups:
- enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
- rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+ items:
+ enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+ rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
- if:
properties:
function:
@@ -123,10 +142,11 @@ patternProperties:
then:
properties:
groups:
- enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
- i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
- i2s1_out_data, i2s2_out_data, i2s3_out_data,
- i2s4_out_data]
+ items:
+ enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+ i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+ i2s1_out_data, i2s2_out_data, i2s3_out_data,
+ i2s4_out_data]
- if:
properties:
function:
@@ -159,10 +179,11 @@ patternProperties:
then:
properties:
groups:
- enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
- pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
- pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
- pcie_wake, pcie_clkreq]
+ items:
+ enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+ pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+ pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+ pcie_wake, pcie_clkreq]
- if:
properties:
function:
@@ -178,11 +199,12 @@ patternProperties:
then:
properties:
groups:
- enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
- pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
- pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
- pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
- pwm_ch7_0, pwm_0, pwm_1]
+ items:
+ enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+ pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+ pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+ pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+ pwm_ch7_0, pwm_0, pwm_1]
- if:
properties:
function:
@@ -260,33 +282,34 @@ patternProperties:
pins:
description:
An array of strings. Each string contains the name of a pin.
- enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
- RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
- I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
- I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
- G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
- G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
- NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
- MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
- MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
- MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
- MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
- PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
- GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
- PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
- AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
- PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
- WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
- WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
- EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
- EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
- WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
- UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
- UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
- PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
- GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
- TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
- WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+ items:
+ enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+ RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+ I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+ I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+ G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+ G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+ NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+ MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+ MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+ MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+ MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+ PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+ GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+ PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+ AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+ PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+ WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+ WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+ EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+ EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+ WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+ UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+ UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+ PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+ GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+ TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+ WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
bias-disable: true
diff --git a/dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml b/dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml
index 3f8ad07..0bf2d9f 100644
--- a/dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -24,11 +24,11 @@ properties:
- qcom,pm6150-gpio
- qcom,pm6150l-gpio
- qcom,pm6350-gpio
+ - qcom,pm6450-gpio
- qcom,pm7250b-gpio
- qcom,pm7325-gpio
- qcom,pm7550ba-gpio
- qcom,pm8005-gpio
- - qcom,pm8008-gpio
- qcom,pm8018-gpio
- qcom,pm8019-gpio
- qcom,pm8038-gpio
@@ -56,10 +56,12 @@ properties:
- qcom,pma8084-gpio
- qcom,pmc8180-gpio
- qcom,pmc8180c-gpio
+ - qcom,pmd8028-gpio
- qcom,pmi632-gpio
- qcom,pmi8950-gpio
- qcom,pmi8994-gpio
- qcom,pmi8998-gpio
+ - qcom,pmih0108-gpio
- qcom,pmk8350-gpio
- qcom,pmk8550-gpio
- qcom,pmm8155au-gpio
@@ -72,6 +74,7 @@ properties:
- qcom,pmx55-gpio
- qcom,pmx65-gpio
- qcom,pmx75-gpio
+ - qcom,pmxr2230-gpio
- enum:
- qcom,spmi-gpio
@@ -122,7 +125,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,pm8008-gpio
- qcom,pmi8950-gpio
- qcom,pmr735d-gpio
then:
@@ -141,6 +143,7 @@ allOf:
- qcom,pm8005-gpio
- qcom,pm8450-gpio
- qcom,pm8916-gpio
+ - qcom,pmd8028-gpio
- qcom,pmk8350-gpio
- qcom,pmr735a-gpio
- qcom,pmr735b-gpio
@@ -198,6 +201,7 @@ allOf:
contains:
enum:
- qcom,pm6350-gpio
+ - qcom,pm6450-gpio
- qcom,pm8350c-gpio
then:
properties:
@@ -261,6 +265,7 @@ allOf:
- qcom,pmc8180c-gpio
- qcom,pmp8074-gpio
- qcom,pms405-gpio
+ - qcom,pmxr2230-gpio
then:
properties:
gpio-line-names:
@@ -305,6 +310,21 @@ allOf:
compatible:
contains:
enum:
+ - qcom,pmih0108-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 18
+ maxItems: 18
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 9
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- qcom,pmx65-gpio
- qcom,pmx75-gpio
then:
@@ -402,6 +422,10 @@ patternProperties:
$ref: "#/$defs/qcom-pmic-gpio-state"
additionalProperties: false
+ "-hog(-[0-9]+)?$":
+ required:
+ - gpio-hog
+
$defs:
qcom-pmic-gpio-state:
type: object
@@ -417,11 +441,11 @@ $defs:
- gpio1-gpio10 for pm6150
- gpio1-gpio12 for pm6150l
- gpio1-gpio9 for pm6350
+ - gpio1-gpio9 for pm6450
- gpio1-gpio12 for pm7250b
- gpio1-gpio10 for pm7325
- gpio1-gpio8 for pm7550ba
- gpio1-gpio4 for pm8005
- - gpio1-gpio2 for pm8008
- gpio1-gpio6 for pm8018
- gpio1-gpio12 for pm8038
- gpio1-gpio40 for pm8058
@@ -447,9 +471,11 @@ $defs:
- gpio1-gpio22 for pm8994
- gpio1-gpio26 for pm8998
- gpio1-gpio22 for pma8084
+ - gpio1-gpio4 for pmd8028
- gpio1-gpio8 for pmi632
- gpio1-gpio2 for pmi8950
- gpio1-gpio10 for pmi8994
+ - gpio1-gpio18 for pmih0108
- gpio1-gpio4 for pmk8350
- gpio1-gpio6 for pmk8550
- gpio1-gpio10 for pmm8155au
@@ -464,6 +490,7 @@ $defs:
and gpio11)
- gpio1-gpio16 for pmx65
- gpio1-gpio16 for pmx75
+ - gpio1-gpio12 for pmxr2230
items:
pattern: "^gpio([0-9]+)$"
@@ -545,6 +572,7 @@ $defs:
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
pm8921_gpio: gpio@150 {
@@ -568,5 +596,12 @@ examples:
power-source = <PM8921_GPIO_S4>;
};
};
+
+ otg-hog {
+ gpio-hog;
+ gpios = <35 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "otg-gpio";
+ };
};
...
diff --git a/dts/upstream/Bindings/pinctrl/qcom,pmic-mpp.yaml b/dts/upstream/Bindings/pinctrl/qcom,pmic-mpp.yaml
index fe717d8..4314670 100644
--- a/dts/upstream/Bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/dts/upstream/Bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -35,6 +35,7 @@ properties:
- qcom,pm8038-mpp
- qcom,pm8058-mpp
- qcom,pm8821-mpp
+ - qcom,pm8901-mpp
- qcom,pm8917-mpp
- qcom,pm8921-mpp
- const: qcom,ssbi-mpp
diff --git a/dts/upstream/Bindings/pinctrl/qcom,sm4450-tlmm.yaml b/dts/upstream/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb675c8..1b941b2 100644
--- a/dts/upstream/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/dts/upstream/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -72,40 +72,24 @@ $defs:
description:
Specify the alternative function to be configured for the specified
pins.
- enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
- atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
- atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
- cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
- dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
- jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
- mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
- mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
- mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
- phase_flag0, phase_flag1, phase_flag10, phase_flag11,
- phase_flag12, phase_flag13, phase_flag14, phase_flag15,
- phase_flag16, phase_flag17, phase_flag18, phase_flag19,
- phase_flag2, phase_flag20, phase_flag21, phase_flag22,
- phase_flag23, phase_flag24, phase_flag25, phase_flag26,
- phase_flag27, phase_flag28, phase_flag29, phase_flag3,
- phase_flag30, phase_flag31, phase_flag4, phase_flag5,
- phase_flag6, phase_flag7, phase_flag8, phase_flag9,
- pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
- prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
- qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
- qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
- qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
- qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
- qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
- qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
- qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
- qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
- tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
- tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
- uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
- uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
- vsense_trigger ]
+ enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+ cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+ coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+ ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+ gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+ jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+ mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+ pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+ prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+ qlink0_enable, qlink0_request, qlink0_wmss_reset,
+ qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+ qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+ qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+ tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+ tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+ tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+ vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat,
+ wlan1_adc_dtest0, wlan1_adc_dtest1 ]
required:
- pins
diff --git a/dts/upstream/Bindings/pinctrl/samsung,pinctrl.yaml b/dts/upstream/Bindings/pinctrl/samsung,pinctrl.yaml
index 118549c..242dd13 100644
--- a/dts/upstream/Bindings/pinctrl/samsung,pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/samsung,pinctrl.yaml
@@ -73,6 +73,13 @@ properties:
minItems: 1
maxItems: 2
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pclk
+
wakeup-interrupt-controller:
$ref: samsung,pinctrl-wakeup-interrupt.yaml
@@ -124,6 +131,20 @@ allOf:
properties:
compatible:
contains:
+ const: google,gs101-pinctrl
+ then:
+ required:
+ - clocks
+ - clock-names
+ else:
+ properties:
+ clocks: false
+ clock-names: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
const: samsung,exynos5433-pinctrl
then:
properties:
diff --git a/dts/upstream/Bindings/platform/acer,aspire1-ec.yaml b/dts/upstream/Bindings/platform/acer,aspire1-ec.yaml
new file mode 100644
index 0000000..7cb0134
--- /dev/null
+++ b/dts/upstream/Bindings/platform/acer,aspire1-ec.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/platform/acer,aspire1-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Acer Aspire 1 Embedded Controller
+
+maintainers:
+ - Nikita Travkin <nikita@trvn.ru>
+
+description:
+ The Acer Aspire 1 laptop uses an embedded controller to control battery
+ and charging as well as to provide a set of misc features such as the
+ laptop lid status and HPD events for the USB Type-C DP alt mode.
+
+properties:
+ compatible:
+ const: acer,aspire1-ec
+
+ reg:
+ const: 0x76
+
+ interrupts:
+ maxItems: 1
+
+ connector:
+ $ref: /schemas/connector/usb-connector.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ embedded-controller@76 {
+ compatible = "acer,aspire1-ec";
+ reg = <0x76>;
+
+ interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+
+ port {
+ ec_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp_out>;
+ };
+ };
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/power/supply/maxim,max8903.yaml b/dts/upstream/Bindings/power/supply/maxim,max8903.yaml
index a8d625f..86af383 100644
--- a/dts/upstream/Bindings/power/supply/maxim,max8903.yaml
+++ b/dts/upstream/Bindings/power/supply/maxim,max8903.yaml
@@ -34,7 +34,7 @@ properties:
flt-gpios:
maxItems: 1
- description: Fault pin (active low, output)
+ description: Fault pin (active low, input)
dcm-gpios:
maxItems: 1
diff --git a/dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml b/dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml
index d84268b..96cd6f3 100644
--- a/dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml
+++ b/dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml
@@ -25,6 +25,9 @@ properties:
- items:
- const: microchip,sama7g5-pwm
- const: atmel,sama5d2-pwm
+ - items:
+ - const: microchip,sam9x7-pwm
+ - const: microchip,sam9x60-pwm
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/pwm/google,cros-ec-pwm.yaml b/dts/upstream/Bindings/pwm/google,cros-ec-pwm.yaml
index 3afe148..f7bc84b 100644
--- a/dts/upstream/Bindings/pwm/google,cros-ec-pwm.yaml
+++ b/dts/upstream/Bindings/pwm/google,cros-ec-pwm.yaml
@@ -35,7 +35,6 @@ properties:
required:
- compatible
- - '#pwm-cells'
additionalProperties: false
diff --git a/dts/upstream/Bindings/pwm/marvell,pxa-pwm.yaml b/dts/upstream/Bindings/pwm/marvell,pxa-pwm.yaml
index ba63255..9ee1946 100644
--- a/dts/upstream/Bindings/pwm/marvell,pxa-pwm.yaml
+++ b/dts/upstream/Bindings/pwm/marvell,pxa-pwm.yaml
@@ -34,7 +34,6 @@ properties:
required:
- compatible
- reg
- - "#pwm-cells"
- clocks
additionalProperties: false
diff --git a/dts/upstream/Bindings/pwm/mediatek,mt2712-pwm.yaml b/dts/upstream/Bindings/pwm/mediatek,mt2712-pwm.yaml
index a5c3088..d515c09 100644
--- a/dts/upstream/Bindings/pwm/mediatek,mt2712-pwm.yaml
+++ b/dts/upstream/Bindings/pwm/mediatek,mt2712-pwm.yaml
@@ -66,7 +66,6 @@ properties:
required:
- compatible
- reg
- - "#pwm-cells"
- clocks
- clock-names
diff --git a/dts/upstream/Bindings/pwm/mediatek,pwm-disp.yaml b/dts/upstream/Bindings/pwm/mediatek,pwm-disp.yaml
index bc813fe..195e437 100644
--- a/dts/upstream/Bindings/pwm/mediatek,pwm-disp.yaml
+++ b/dts/upstream/Bindings/pwm/mediatek,pwm-disp.yaml
@@ -31,6 +31,7 @@ properties:
- mediatek,mt8188-disp-pwm
- mediatek,mt8192-disp-pwm
- mediatek,mt8195-disp-pwm
+ - mediatek,mt8365-disp-pwm
- const: mediatek,mt8183-disp-pwm
reg:
@@ -58,7 +59,6 @@ properties:
required:
- compatible
- reg
- - "#pwm-cells"
- clocks
- clock-names
diff --git a/dts/upstream/Bindings/pwm/pwm-bcm2835.yaml b/dts/upstream/Bindings/pwm/pwm-bcm2835.yaml
index 15e7fd9..9dc25f3 100644
--- a/dts/upstream/Bindings/pwm/pwm-bcm2835.yaml
+++ b/dts/upstream/Bindings/pwm/pwm-bcm2835.yaml
@@ -29,7 +29,6 @@ required:
- compatible
- reg
- clocks
- - "#pwm-cells"
additionalProperties: false
diff --git a/dts/upstream/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/dts/upstream/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml
index 4d0b596..7523a89 100644
--- a/dts/upstream/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml
+++ b/dts/upstream/Bindings/pwm/snps,dw-apb-timers-pwm2.yaml
@@ -51,7 +51,6 @@ properties:
required:
- compatible
- reg
- - "#pwm-cells"
- clocks
- clock-names
diff --git a/dts/upstream/Bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml b/dts/upstream/Bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
new file mode 100644
index 0000000..ec6695c
--- /dev/null
+++ b/dts/upstream/Bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1 System LDOs
+
+maintainers:
+ - Samuel Holland <samuel@sholland.org>
+
+description:
+ Allwinner D1 contains a pair of general-purpose LDOs which are designed to
+ supply power inside and outside the SoC. They are controlled by a register
+ within the system control MMIO space.
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun20i-d1-system-ldos
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "^ldo[ab]$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+...
diff --git a/dts/upstream/Bindings/regulator/fixed-regulator.yaml b/dts/upstream/Bindings/regulator/fixed-regulator.yaml
index 9ff9abf..51e2f6f 100644
--- a/dts/upstream/Bindings/regulator/fixed-regulator.yaml
+++ b/dts/upstream/Bindings/regulator/fixed-regulator.yaml
@@ -41,6 +41,13 @@ allOf:
- gpios
properties:
+ $nodename:
+ anyOf:
+ - description: Preferred name is 'regulator-[0-9]v[0-9]'
+ pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
+ - description: Any name allowed
+ deprecated: true
+
compatible:
enum:
- regulator-fixed
diff --git a/dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml b/dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml
index 3d469b8..849bfa5 100644
--- a/dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml
@@ -28,6 +28,7 @@ properties:
- nxp,pca9450a
- nxp,pca9450b
- nxp,pca9450c
+ - nxp,pca9451a
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/regulator/qcom,usb-vbus-regulator.yaml b/dts/upstream/Bindings/regulator/qcom,usb-vbus-regulator.yaml
index 33ae1f7..fcefc72 100644
--- a/dts/upstream/Bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/dts/upstream/Bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -26,6 +26,7 @@ properties:
- enum:
- qcom,pm4125-vbus-reg
- qcom,pm6150-vbus-reg
+ - qcom,pm7250b-vbus-reg
- qcom,pmi632-vbus-reg
- const: qcom,pm8150b-vbus-reg
diff --git a/dts/upstream/Bindings/regulator/st,stm32-vrefbuf.yaml b/dts/upstream/Bindings/regulator/st,stm32-vrefbuf.yaml
index 05f4ad2..6ceaffb 100644
--- a/dts/upstream/Bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/dts/upstream/Bindings/regulator/st,stm32-vrefbuf.yaml
@@ -30,6 +30,10 @@ properties:
vdda-supply:
description: phandle to the vdda input analog voltage.
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/regulator/ti,tps62864.yaml b/dts/upstream/Bindings/regulator/ti,tps62864.yaml
index 0f29c75..dddea27 100644
--- a/dts/upstream/Bindings/regulator/ti,tps62864.yaml
+++ b/dts/upstream/Bindings/regulator/ti,tps62864.yaml
@@ -24,7 +24,7 @@ properties:
type: object
properties:
- "SW":
+ SW:
type: object
$ref: regulator.yaml#
unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/remoteproc/mtk,scp.yaml b/dts/upstream/Bindings/remoteproc/mtk,scp.yaml
index 507f98f..c5dc3c2 100644
--- a/dts/upstream/Bindings/remoteproc/mtk,scp.yaml
+++ b/dts/upstream/Bindings/remoteproc/mtk,scp.yaml
@@ -19,6 +19,7 @@ properties:
- mediatek,mt8183-scp
- mediatek,mt8186-scp
- mediatek,mt8188-scp
+ - mediatek,mt8188-scp-dual
- mediatek,mt8192-scp
- mediatek,mt8195-scp
- mediatek,mt8195-scp-dual
@@ -194,6 +195,7 @@ allOf:
properties:
compatible:
enum:
+ - mediatek,mt8188-scp-dual
- mediatek,mt8195-scp-dual
then:
properties:
diff --git a/dts/upstream/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/dts/upstream/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml
index 9717340..4d2055f 100644
--- a/dts/upstream/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml
+++ b/dts/upstream/Bindings/remoteproc/qcom,msm8996-mss-pil.yaml
@@ -231,7 +231,6 @@ allOf:
- const: snoc_axi
- const: mnoc_axi
- const: qdss
- glink-edge: false
required:
- pll-supply
- smd-edge
diff --git a/dts/upstream/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/dts/upstream/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
index 06f5f93..bca5939 100644
--- a/dts/upstream/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
+++ b/dts/upstream/Bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
@@ -81,7 +81,11 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Phandle reference to a syscon representing TCSR followed by the
- three offsets within syscon for q6, modem and nc halt registers.
+ offset within syscon for q6 halt register.
+ items:
+ - items:
+ - description: phandle to TCSR syscon region
+ - description: offset to the Q6 halt register
qcom,smem-states:
$ref: /schemas/types.yaml#/definitions/phandle-array
diff --git a/dts/upstream/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/dts/upstream/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index 9381c70..f4118b2 100644
--- a/dts/upstream/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/dts/upstream/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -89,7 +89,11 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Phandle reference to a syscon representing TCSR followed by the
- three offsets within syscon for q6, modem and nc halt registers.
+ offset within syscon for q6 halt register.
+ items:
+ - items:
+ - description: phandle to TCSR syscon region
+ - description: offset to the Q6 halt register
qcom,qmp:
$ref: /schemas/types.yaml#/definitions/phandle
diff --git a/dts/upstream/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/dts/upstream/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
index 20df83a..a3c7487 100644
--- a/dts/upstream/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
+++ b/dts/upstream/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
@@ -81,7 +81,11 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Phandle reference to a syscon representing TCSR followed by the
- three offsets within syscon for q6, modem and nc halt registers.
+ offset within syscon for q6 halt register.
+ items:
+ - items:
+ - description: phandle to TCSR syscon region
+ - description: offset to the Q6 halt register
qcom,smem-states:
$ref: /schemas/types.yaml#/definitions/phandle-array
diff --git a/dts/upstream/Bindings/remoteproc/qcom,smd-edge.yaml b/dts/upstream/Bindings/remoteproc/qcom,smd-edge.yaml
index 02c85b4..63500b1 100644
--- a/dts/upstream/Bindings/remoteproc/qcom,smd-edge.yaml
+++ b/dts/upstream/Bindings/remoteproc/qcom,smd-edge.yaml
@@ -61,6 +61,7 @@ properties:
description:
Three entries specifying the outgoing ipc bit used for signaling the
remote processor.
+ deprecated: true
qcom,smd-edge:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -111,7 +112,7 @@ examples:
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 8>;
+ mboxes = <&apcs 8>;
qcom,smd-edge = <1>;
};
};
diff --git a/dts/upstream/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/dts/upstream/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index 78aac69..6f13da1 100644
--- a/dts/upstream/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/dts/upstream/Bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -18,11 +18,26 @@ description: |
properties:
compatible:
- const: xlnx,zynqmp-r5fss
+ enum:
+ - xlnx,zynqmp-r5fss
+ - xlnx,versal-r5fss
+ - xlnx,versal-net-r52fss
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges:
+ description: |
+ Standard ranges definition providing address translations for
+ local R5F TCM address spaces to bus addresses.
xlnx,cluster-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
+ default: 1
description: |
The RPU MPCore can operate in split mode (Dual-processor performance), Safety
lock-step mode(Both RPU cores execute the same code in lock-step,
@@ -36,8 +51,16 @@ properties:
1: lockstep mode (default)
2: single cpu mode
+ xlnx,tcm-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Configure RPU TCM
+ 0: split mode
+ 1: lockstep mode
+
patternProperties:
- "^r5f-[a-f0-9]+$":
+ "^r(.*)@[0-9a-f]+$":
type: object
description: |
The RPU is located in the Low Power Domain of the Processor Subsystem.
@@ -52,10 +75,22 @@ patternProperties:
properties:
compatible:
- const: xlnx,zynqmp-r5f
+ enum:
+ - xlnx,zynqmp-r5f
+ - xlnx,versal-r5f
+ - xlnx,versal-net-r52f
+
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ maxItems: 4
power-domains:
- maxItems: 1
+ minItems: 2
+ maxItems: 5
mboxes:
minItems: 1
@@ -101,35 +136,235 @@ patternProperties:
required:
- compatible
+ - reg
+ - reg-names
- power-domains
- unevaluatedProperties: false
-
required:
- compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,versal-net-r52fss
+ then:
+ properties:
+ xlnx,tcm-mode: false
+
+ patternProperties:
+ "^r52f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+ - description: CTCM internal memory
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+ - const: ctcm0
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+ - description: CTCM power domain
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,zynqmp-r5fss
+ - xlnx,versal-r5fss
+ then:
+ if:
+ properties:
+ xlnx,cluster-mode:
+ enum: [1, 2]
+ then:
+ properties:
+ xlnx,tcm-mode:
+ enum: [1]
+
+ patternProperties:
+ "^r5f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+ - description: extra ATCM memory in lockstep mode
+ - description: extra BTCM memory in lockstep mode
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+ - const: atcm1
+ - const: btcm1
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+ - description: second ATCM power domain
+ - description: second BTCM power domain
+
+ required:
+ - xlnx,tcm-mode
+
+ else:
+ properties:
+ xlnx,tcm-mode:
+ enum: [0]
+
+ patternProperties:
+ "^r5f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+
+ required:
+ - xlnx,tcm-mode
additionalProperties: false
examples:
- |
- remoteproc {
- compatible = "xlnx,zynqmp-r5fss";
- xlnx,cluster-mode = <1>;
-
- r5f-0 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x7>;
- memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
- mbox-names = "tx", "rx";
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+
+ // Split mode configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <0>;
+ xlnx,tcm-mode = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+ <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
+
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
+ };
+
+ - |
+ //Lockstep configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <1>;
+ xlnx,tcm-mode = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>,
+ <0x0 0x20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
- r5f-1 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x8>;
- memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
- mbox-names = "tx", "rx";
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
};
...
diff --git a/dts/upstream/Bindings/riscv/starfive.yaml b/dts/upstream/Bindings/riscv/starfive.yaml
index cc4d92f..b672f85 100644
--- a/dts/upstream/Bindings/riscv/starfive.yaml
+++ b/dts/upstream/Bindings/riscv/starfive.yaml
@@ -26,6 +26,7 @@ properties:
- items:
- enum:
+ - milkv,mars
- starfive,visionfive-2-v1.2a
- starfive,visionfive-2-v1.3b
- const: starfive,jh7110
diff --git a/dts/upstream/Bindings/rng/microsoft,vmgenid.yaml b/dts/upstream/Bindings/rng/microsoft,vmgenid.yaml
new file mode 100644
index 0000000..8f20dee
--- /dev/null
+++ b/dts/upstream/Bindings/rng/microsoft,vmgenid.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/microsoft,vmgenid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtual Machine Generation ID
+
+maintainers:
+ - Jason A. Donenfeld <Jason@zx2c4.com>
+
+description:
+ Firmwares or hypervisors can use this devicetree to describe an
+ interrupt and a shared resource to inject a Virtual Machine Generation ID.
+ Virtual Machine Generation ID is a globally unique identifier (GUID) and
+ the devicetree binding follows VMGenID specification defined in
+ http://go.microsoft.com/fwlink/?LinkId=260709.
+
+properties:
+ compatible:
+ const: microsoft,vmgenid
+
+ reg:
+ description:
+ Specifies a 16-byte VMGenID in endianness-agnostic hexadecimal format.
+ maxItems: 1
+
+ interrupts:
+ description:
+ Interrupt used to notify that a new VMGenID is available.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ rng@80000000 {
+ compatible = "microsoft,vmgenid";
+ reg = <0x80000000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+ };
+
+...
diff --git a/dts/upstream/Bindings/rng/st,stm32-rng.yaml b/dts/upstream/Bindings/rng/st,stm32-rng.yaml
index 717f6b3..340d01d 100644
--- a/dts/upstream/Bindings/rng/st,stm32-rng.yaml
+++ b/dts/upstream/Bindings/rng/st,stm32-rng.yaml
@@ -37,6 +37,10 @@ properties:
description: If set, the RNG configuration in RNG_CR, RNG_HTCR and
RNG_NSCR will be locked.
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/rtc/alphascale,asm9260-rtc.txt b/dts/upstream/Bindings/rtc/alphascale,asm9260-rtc.txt
deleted file mode 100644
index 76ebca5..0000000
--- a/dts/upstream/Bindings/rtc/alphascale,asm9260-rtc.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Alphascale asm9260 SoC Real Time Clock
-
-Required properties:
-- compatible: Should be "alphascale,asm9260-rtc"
-- reg: Physical base address of the controller and length
- of memory mapped region.
-- interrupts: IRQ line for the RTC.
-- clocks: Reference to the clock entry.
-- clock-names: should contain:
- * "ahb" for the SoC RTC clock
-
-Example:
-rtc0: rtc@800a0000 {
- compatible = "alphascale,asm9260-rtc";
- reg = <0x800a0000 0x100>;
- clocks = <&acc CLKID_AHB_RTC>;
- clock-names = "ahb";
- interrupts = <2>;
-};
diff --git a/dts/upstream/Bindings/rtc/alphascale,asm9260-rtc.yaml b/dts/upstream/Bindings/rtc/alphascale,asm9260-rtc.yaml
new file mode 100644
index 0000000..f955a7f
--- /dev/null
+++ b/dts/upstream/Bindings/rtc/alphascale,asm9260-rtc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/alphascale,asm9260-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alphascale asm9260 SoC Real Time Clock
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ const: alphascale,asm9260-rtc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ahb
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/alphascale,asm9260.h>
+
+ rtc@800a0000 {
+ compatible = "alphascale,asm9260-rtc";
+ reg = <0x800a0000 0x100>;
+ clocks = <&acc CLKID_AHB_RTC>;
+ clock-names = "ahb";
+ interrupts = <2>;
+ };
diff --git a/dts/upstream/Bindings/rtc/armada-380-rtc.txt b/dts/upstream/Bindings/rtc/armada-380-rtc.txt
deleted file mode 100644
index c3c9a12..0000000
--- a/dts/upstream/Bindings/rtc/armada-380-rtc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Real Time Clock of the Armada 38x/7K/8K SoCs
-
-RTC controller for the Armada 38x, 7K and 8K SoCs
-
-Required properties:
-- compatible : Should be one of the following:
- "marvell,armada-380-rtc" for Armada 38x SoC
- "marvell,armada-8k-rtc" for Aramda 7K/8K SoCs
-- reg: a list of base address and size pairs, one for each entry in
- reg-names
-- reg names: should contain:
- * "rtc" for the RTC registers
- * "rtc-soc" for the SoC related registers and among them the one
- related to the interrupt.
-- interrupts: IRQ line for the RTC.
-
-Example:
-
-rtc@a3800 {
- compatible = "marvell,armada-380-rtc";
- reg = <0xa3800 0x20>, <0x184a0 0x0c>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/dts/upstream/Bindings/rtc/digicolor-rtc.txt b/dts/upstream/Bindings/rtc/digicolor-rtc.txt
deleted file mode 100644
index d464986..0000000
--- a/dts/upstream/Bindings/rtc/digicolor-rtc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Conexant Digicolor Real Time Clock controller
-
-This binding currently supports the CX92755 SoC.
-
-Required properties:
-- compatible: should be "cnxt,cx92755-rtc"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: rtc alarm interrupt
-
-Example:
-
- rtc@f0000c30 {
- compatible = "cnxt,cx92755-rtc";
- reg = <0xf0000c30 0x18>;
- interrupts = <25>;
- };
diff --git a/dts/upstream/Bindings/rtc/fsl,stmp3xxx-rtc.yaml b/dts/upstream/Bindings/rtc/fsl,stmp3xxx-rtc.yaml
new file mode 100644
index 0000000..534de41
--- /dev/null
+++ b/dts/upstream/Bindings/rtc/fsl,stmp3xxx-rtc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/fsl,stmp3xxx-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMP3xxx/i.MX28 Time Clock Controller
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx28-rtc
+ - fsl,imx23-rtc
+ - const: fsl,stmp3xxx-rtc
+ - const: fsl,stmp3xxx-rtc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ stmp,crystal-freq:
+ description:
+ Override crystal frequency as determined from fuse bits.
+ Use <0> for "no crystal".
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 32000, 32768]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ rtc@80056000 {
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+ reg = <0x80056000 2000>;
+ interrupts = <29>;
+ };
diff --git a/dts/upstream/Bindings/rtc/google,goldfish-rtc.txt b/dts/upstream/Bindings/rtc/google,goldfish-rtc.txt
deleted file mode 100644
index 634312d..0000000
--- a/dts/upstream/Bindings/rtc/google,goldfish-rtc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Android Goldfish RTC
-
-Android Goldfish RTC device used by Android emulator.
-
-Required properties:
-
-- compatible : should contain "google,goldfish-rtc"
-- reg : <registers mapping>
-- interrupts : <interrupt mapping>
-
-Example:
-
- goldfish_timer@9020000 {
- compatible = "google,goldfish-rtc";
- reg = <0x9020000 0x1000>;
- interrupts = <0x3>;
- };
diff --git a/dts/upstream/Bindings/rtc/lpc32xx-rtc.txt b/dts/upstream/Bindings/rtc/lpc32xx-rtc.txt
deleted file mode 100644
index a87a1e9..0000000
--- a/dts/upstream/Bindings/rtc/lpc32xx-rtc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* NXP LPC32xx SoC Real Time Clock controller
-
-Required properties:
-- compatible: must be "nxp,lpc3220-rtc"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: The RTC interrupt
-
-Example:
-
- rtc@40024000 {
- compatible = "nxp,lpc3220-rtc";
- reg = <0x40024000 0x1000>;
- interrupts = <52 0>;
- };
diff --git a/dts/upstream/Bindings/rtc/marvell,armada-380-rtc.yaml b/dts/upstream/Bindings/rtc/marvell,armada-380-rtc.yaml
new file mode 100644
index 0000000..adf3ba0
--- /dev/null
+++ b/dts/upstream/Bindings/rtc/marvell,armada-380-rtc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/marvell,armada-380-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTC controller for the Armada 38x, 7K and 8K SoCs
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada-380-rtc
+ - marvell,armada-8k-rtc
+
+ reg:
+ items:
+ - description: RTC base address size
+ - description: Base address and size of SoC related registers
+
+ reg-names:
+ items:
+ - const: rtc
+ - const: rtc-soc
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ rtc@a3800 {
+ compatible = "marvell,armada-380-rtc";
+ reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/dts/upstream/Bindings/rtc/marvell,pxa-rtc.yaml b/dts/upstream/Bindings/rtc/marvell,pxa-rtc.yaml
new file mode 100644
index 0000000..43d6868
--- /dev/null
+++ b/dts/upstream/Bindings/rtc/marvell,pxa-rtc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/marvell,pxa-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PXA Real Time Clock
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ const: marvell,pxa-rtc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: 1 Hz
+ - description: Alarm
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ rtc@40900000 {
+ compatible = "marvell,pxa-rtc";
+ reg = <0x40900000 0x3c>;
+ interrupts = <30>, <31>;
+ };
diff --git a/dts/upstream/Bindings/rtc/maxim,ds1742.txt b/dts/upstream/Bindings/rtc/maxim,ds1742.txt
deleted file mode 100644
index d0f937c..0000000
--- a/dts/upstream/Bindings/rtc/maxim,ds1742.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Maxim (Dallas) DS1742/DS1743 Real Time Clock
-
-Required properties:
-- compatible: Should contain "maxim,ds1742".
-- reg: Physical base address of the RTC and length of memory
- mapped region.
-
-Example:
- rtc: rtc@10000000 {
- compatible = "maxim,ds1742";
- reg = <0x10000000 0x800>;
- };
diff --git a/dts/upstream/Bindings/rtc/nxp,lpc1788-rtc.txt b/dts/upstream/Bindings/rtc/nxp,lpc1788-rtc.txt
deleted file mode 100644
index 3c97bd1..0000000
--- a/dts/upstream/Bindings/rtc/nxp,lpc1788-rtc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-NXP LPC1788 real-time clock
-
-The LPC1788 RTC provides calendar and clock functionality
-together with periodic tick and alarm interrupt support.
-
-Required properties:
-- compatible : must contain "nxp,lpc1788-rtc"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A single interrupt specifier.
-- clocks : Must contain clock specifiers for rtc and register clock
-- clock-names : Must contain "rtc" and "reg"
- See ../clocks/clock-bindings.txt for details.
-
-Example:
-rtc: rtc@40046000 {
- compatible = "nxp,lpc1788-rtc";
- reg = <0x40046000 0x1000>;
- interrupts = <47>;
- clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
- clock-names = "rtc", "reg";
-};
diff --git a/dts/upstream/Bindings/rtc/nxp,lpc1788-rtc.yaml b/dts/upstream/Bindings/rtc/nxp,lpc1788-rtc.yaml
new file mode 100644
index 0000000..e88b847
--- /dev/null
+++ b/dts/upstream/Bindings/rtc/nxp,lpc1788-rtc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,lpc1788-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1788 real-time clock
+
+description:
+ The LPC1788 RTC provides calendar and clock functionality
+ together with periodic tick and alarm interrupt support.
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ const: nxp,lpc1788-rtc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: RTC clock
+ - description: Register clock
+
+ clock-names:
+ items:
+ - const: rtc
+ - const: reg
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ rtc@40046000 {
+ compatible = "nxp,lpc1788-rtc";
+ reg = <0x40046000 0x1000>;
+ clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "rtc", "reg";
+ interrupts = <47>;
+ };
diff --git a/dts/upstream/Bindings/rtc/orion-rtc.txt b/dts/upstream/Bindings/rtc/orion-rtc.txt
deleted file mode 100644
index 3bf63ff..0000000
--- a/dts/upstream/Bindings/rtc/orion-rtc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Mvebu Real Time Clock
-
-RTC controller for the Kirkwood, the Dove, the Armada 370 and the
-Armada XP SoCs
-
-Required properties:
-- compatible : Should be "marvell,orion-rtc"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: IRQ line for the RTC.
-
-Example:
-
-rtc@10300 {
- compatible = "marvell,orion-rtc";
- reg = <0xd0010300 0x20>;
- interrupts = <50>;
-};
diff --git a/dts/upstream/Bindings/rtc/pxa-rtc.txt b/dts/upstream/Bindings/rtc/pxa-rtc.txt
deleted file mode 100644
index 8c6672a..0000000
--- a/dts/upstream/Bindings/rtc/pxa-rtc.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* PXA RTC
-
-PXA specific RTC driver.
-
-Required properties:
-- compatible : Should be "marvell,pxa-rtc"
-
-Examples:
-
-rtc@40900000 {
- compatible = "marvell,pxa-rtc";
- reg = <0x40900000 0x3c>;
- interrupts = <30 31>;
-};
diff --git a/dts/upstream/Bindings/rtc/rtc-aspeed.txt b/dts/upstream/Bindings/rtc/rtc-aspeed.txt
deleted file mode 100644
index 2e956b3..0000000
--- a/dts/upstream/Bindings/rtc/rtc-aspeed.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-ASPEED BMC RTC
-==============
-
-Required properties:
- - compatible: should be one of the following
- * aspeed,ast2400-rtc for the ast2400
- * aspeed,ast2500-rtc for the ast2500
- * aspeed,ast2600-rtc for the ast2600
-
- - reg: physical base address of the controller and length of memory mapped
- region
-
- - interrupts: The interrupt number
-
-Example:
-
- rtc@1e781000 {
- compatible = "aspeed,ast2400-rtc";
- reg = <0x1e781000 0x18>;
- interrupts = <22>;
- status = "disabled";
- };
diff --git a/dts/upstream/Bindings/rtc/spear-rtc.txt b/dts/upstream/Bindings/rtc/spear-rtc.txt
deleted file mode 100644
index fecf8e4..0000000
--- a/dts/upstream/Bindings/rtc/spear-rtc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* SPEAr RTC
-
-Required properties:
-- compatible : "st,spear600-rtc"
-- reg : Address range of the rtc registers
-- interrupt: Should contain the rtc interrupt number
-
-Example:
-
- rtc@fc000000 {
- compatible = "st,spear600-rtc";
- reg = <0xfc000000 0x1000>;
- interrupt-parent = <&vic1>;
- interrupts = <12>;
- };
diff --git a/dts/upstream/Bindings/rtc/stmp3xxx-rtc.txt b/dts/upstream/Bindings/rtc/stmp3xxx-rtc.txt
deleted file mode 100644
index fa6a942..0000000
--- a/dts/upstream/Bindings/rtc/stmp3xxx-rtc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* STMP3xxx/i.MX28 Time Clock controller
-
-Required properties:
-- compatible: should be one of the following.
- * "fsl,stmp3xxx-rtc"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: rtc alarm interrupt
-
-Optional properties:
-- stmp,crystal-freq: override crystal frequency as determined from fuse bits.
- Only <32000> and <32768> are possible for the hardware. Use <0> for
- "no crystal".
-
-Example:
-
-rtc@80056000 {
- compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x80056000 2000>;
- interrupts = <29>;
-};
diff --git a/dts/upstream/Bindings/rtc/trivial-rtc.yaml b/dts/upstream/Bindings/rtc/trivial-rtc.yaml
index c9e3c52..fffd759 100644
--- a/dts/upstream/Bindings/rtc/trivial-rtc.yaml
+++ b/dts/upstream/Bindings/rtc/trivial-rtc.yaml
@@ -24,6 +24,14 @@ properties:
- abracon,abb5zes3
# AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface
- abracon,abeoz9
+ # ASPEED BMC ast2400 Real-time Clock
+ - aspeed,ast2400-rtc
+ # ASPEED BMC ast2500 Real-time Clock
+ - aspeed,ast2500-rtc
+ # ASPEED BMC ast2600 Real-time Clock
+ - aspeed,ast2600-rtc
+ # Conexant Digicolor Real Time Clock Controller
+ - cnxt,cx92755-rtc
# I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
- dallas,ds1374
# Dallas DS1672 Real-time Clock
@@ -38,19 +46,28 @@ properties:
- epson,rx8025
- epson,rx8035
# I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
+ - epson,rx8111
- epson,rx8571
# I2C-BUS INTERFACE REAL TIME CLOCK MODULE
- epson,rx8581
+ # Android Goldfish Real-time Clock
+ - google,goldfish-rtc
# Intersil ISL1208 Low Power RTC with Battery Backed SRAM
- isil,isl1208
# Intersil ISL1218 Low Power RTC with Battery Backed SRAM
- isil,isl1218
+ # Mvebu Real-time Clock
+ - marvell,orion-rtc
+ # Maxim DS1742/DS1743 Real-time Clock
+ - maxim,ds1742
# SPI-BUS INTERFACE REAL TIME CLOCK MODULE
- maxim,mcp795
# Real Time Clock Module with I2C-Bus
- microcrystal,rv3029
# Real Time Clock
- microcrystal,rv8523
+ # NXP LPC32xx SoC Real-time Clock
+ - nxp,lpc3220-rtc
# Real-time Clock Module
- pericom,pt7c4338
# I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
@@ -67,6 +84,10 @@ properties:
- ricoh,rv5c387a
# 2-wire CMOS real-time clock
- sii,s35390a
+ # ST SPEAr Real-time Clock
+ - st,spear600-rtc
+ # VIA/Wondermedia VT8500 Real-time Clock
+ - via,vt8500-rtc
# I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
- whwave,sd3078
# Xircom X1205 I2C RTC
diff --git a/dts/upstream/Bindings/rtc/twl-rtc.txt b/dts/upstream/Bindings/rtc/twl-rtc.txt
deleted file mode 100644
index 8f9a94f..0000000
--- a/dts/upstream/Bindings/rtc/twl-rtc.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-* Texas Instruments TWL4030/6030 RTC
-
-Required properties:
-- compatible : Should be "ti,twl4030-rtc"
-- interrupts : Should be the interrupt number.
-
-Example:
- rtc {
- compatible = "ti,twl4030-rtc";
- interrupts = <11>;
- };
diff --git a/dts/upstream/Bindings/rtc/via,vt8500-rtc.txt b/dts/upstream/Bindings/rtc/via,vt8500-rtc.txt
deleted file mode 100644
index 3c0484c..0000000
--- a/dts/upstream/Bindings/rtc/via,vt8500-rtc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-VIA/Wondermedia VT8500 Realtime Clock Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-rtc"
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : alarm interrupt
-
-Example:
-
- rtc@d8100000 {
- compatible = "via,vt8500-rtc";
- reg = <0xd8100000 0x10000>;
- interrupts = <48>;
- };
diff --git a/dts/upstream/Bindings/serial/actions,owl-uart.txt b/dts/upstream/Bindings/serial/actions,owl-uart.txt
deleted file mode 100644
index aa873ea..0000000
--- a/dts/upstream/Bindings/serial/actions,owl-uart.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Actions Semi Owl UART
-
-Required properties:
-- compatible : "actions,s500-uart", "actions,owl-uart" for S500
- "actions,s900-uart", "actions,owl-uart" for S900
-- reg : Offset and length of the register set for the device.
-- interrupts : Should contain UART interrupt.
-
-
-Example:
-
- uart3: serial@b0126000 {
- compatible = "actions,s500-uart", "actions,owl-uart";
- reg = <0xb0126000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- };
diff --git a/dts/upstream/Bindings/serial/actions,owl-uart.yaml b/dts/upstream/Bindings/serial/actions,owl-uart.yaml
new file mode 100644
index 0000000..ab1c451
--- /dev/null
+++ b/dts/upstream/Bindings/serial/actions,owl-uart.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/actions,owl-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl UART
+
+maintainers:
+ - Kanak Shilledar <kanakshilledar111@protonmail.com>
+
+allOf:
+ - $ref: serial.yaml
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - actions,s500-uart
+ - actions,s900-uart
+ - const: actions,owl-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/actions,s500-cmu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ uart0: serial@b0126000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb0126000 0x1000>;
+ clocks = <&cmu CLK_UART0>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/dts/upstream/Bindings/serial/amlogic,meson-uart.yaml b/dts/upstream/Bindings/serial/amlogic,meson-uart.yaml
index 2e189e5..0565fb7 100644
--- a/dts/upstream/Bindings/serial/amlogic,meson-uart.yaml
+++ b/dts/upstream/Bindings/serial/amlogic,meson-uart.yaml
@@ -54,7 +54,9 @@ properties:
- const: amlogic,meson-gx-uart
- description: UART controller on S4 compatible SoCs
items:
- - const: amlogic,t7-uart
+ - enum:
+ - amlogic,a4-uart
+ - amlogic,t7-uart
- const: amlogic,meson-s4-uart
reg:
diff --git a/dts/upstream/Bindings/serial/brcm,bcm2835-aux-uart.txt b/dts/upstream/Bindings/serial/brcm,bcm2835-aux-uart.txt
deleted file mode 100644
index b5cc629..0000000
--- a/dts/upstream/Bindings/serial/brcm,bcm2835-aux-uart.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* BCM2835 AUXILIAR UART
-
-Required properties:
-
-- compatible: "brcm,bcm2835-aux-uart"
-- reg: The base address of the UART register bank.
-- interrupts: A single interrupt specifier.
-- clocks: Clock driving the hardware; used to figure out the baud rate
- divisor.
-
-Example:
-
- uart1: serial@7e215040 {
- compatible = "brcm,bcm2835-aux-uart";
- reg = <0x7e215040 0x40>;
- interrupts = <1 29>;
- clocks = <&aux BCM2835_AUX_CLOCK_UART>;
- };
diff --git a/dts/upstream/Bindings/serial/brcm,bcm2835-aux-uart.yaml b/dts/upstream/Bindings/serial/brcm,bcm2835-aux-uart.yaml
new file mode 100644
index 0000000..6b72459
--- /dev/null
+++ b/dts/upstream/Bindings/serial/brcm,bcm2835-aux-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm2835-aux-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 AUXILIARY UART
+
+maintainers:
+ - Pratik Farkase <pratikfarkase94@gmail.com>
+ - Florian Fainelli <florian.fainelli@broadcom.com>
+ - Stefan Wahren <wahrenst@gmx.net>
+
+allOf:
+ - $ref: serial.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm2835-aux-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835-aux.h>
+ serial@7e215040 {
+ compatible = "brcm,bcm2835-aux-uart";
+ reg = <0x7e215040 0x40>;
+ interrupts = <1 29>;
+ clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+ };
diff --git a/dts/upstream/Bindings/serial/cdns,uart.yaml b/dts/upstream/Bindings/serial/cdns,uart.yaml
index 2129247..d7f047b 100644
--- a/dts/upstream/Bindings/serial/cdns,uart.yaml
+++ b/dts/upstream/Bindings/serial/cdns,uart.yaml
@@ -46,6 +46,9 @@ properties:
power-domains:
maxItems: 1
+ resets:
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/serial/fsl,s32-linflexuart.yaml b/dts/upstream/Bindings/serial/fsl,s32-linflexuart.yaml
index 7a10555..4171f52 100644
--- a/dts/upstream/Bindings/serial/fsl,s32-linflexuart.yaml
+++ b/dts/upstream/Bindings/serial/fsl,s32-linflexuart.yaml
@@ -23,7 +23,9 @@ properties:
oneOf:
- const: fsl,s32v234-linflexuart
- items:
- - const: nxp,s32g2-linflexuart
+ - enum:
+ - nxp,s32g2-linflexuart
+ - nxp,s32g3-linflexuart
- const: fsl,s32v234-linflexuart
reg:
diff --git a/dts/upstream/Bindings/serial/renesas,scif.yaml b/dts/upstream/Bindings/serial/renesas,scif.yaml
index 4610a5b..f3a3eb2 100644
--- a/dts/upstream/Bindings/serial/renesas,scif.yaml
+++ b/dts/upstream/Bindings/serial/renesas,scif.yaml
@@ -68,6 +68,7 @@ properties:
- renesas,scif-r8a779a0 # R-Car V3U
- renesas,scif-r8a779f0 # R-Car S4-8
- renesas,scif-r8a779g0 # R-Car V4H
+ - renesas,scif-r8a779h0 # R-Car V4M
- const: renesas,rcar-gen4-scif # R-Car Gen4
- const: renesas,scif # generic SCIF compatible UART
diff --git a/dts/upstream/Bindings/serial/st,stm32-uart.yaml b/dts/upstream/Bindings/serial/st,stm32-uart.yaml
index 62f97da..2ed5261 100644
--- a/dts/upstream/Bindings/serial/st,stm32-uart.yaml
+++ b/dts/upstream/Bindings/serial/st,stm32-uart.yaml
@@ -73,6 +73,10 @@ properties:
enum: [1, 2, 4, 8, 12, 14, 16]
default: 8
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
allOf:
- $ref: rs485.yaml#
- $ref: serial.yaml#
diff --git a/dts/upstream/Bindings/soc/qcom/qcom,pmic-glink.yaml b/dts/upstream/Bindings/soc/qcom/qcom,pmic-glink.yaml
index 4310bae..4512390 100644
--- a/dts/upstream/Bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/dts/upstream/Bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -58,20 +58,6 @@ patternProperties:
required:
- compatible
-allOf:
- - if:
- not:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sm8450-pmic-glink
- - qcom,sm8550-pmic-glink
- - qcom,x1e80100-pmic-glink
- then:
- properties:
- orientation-gpios: false
-
additionalProperties: false
examples:
diff --git a/dts/upstream/Bindings/soc/qcom/qcom,wcnss.yaml b/dts/upstream/Bindings/soc/qcom/qcom,wcnss.yaml
index 74bb92e..fd6db0c 100644
--- a/dts/upstream/Bindings/soc/qcom/qcom,wcnss.yaml
+++ b/dts/upstream/Bindings/soc/qcom/qcom,wcnss.yaml
@@ -116,8 +116,8 @@ examples:
bluetooth {
compatible = "qcom,wcnss-bt";
- /* BD address 00:11:22:33:44:55 */
- local-bd-address = [ 55 44 33 22 11 00 ];
+ /* Updated by boot firmware (little-endian order) */
+ local-bd-address = [ 00 00 00 00 00 00 ];
};
wifi {
diff --git a/dts/upstream/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml b/dts/upstream/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml
new file mode 100644
index 0000000..ebbf0c9
--- /dev/null
+++ b/dts/upstream/Bindings/soc/renesas/renesas,r9a09g057-sys.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g057-sys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) System Controller (SYS)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ The RZ/V2H(P) SYS (System Controller) controls the overall
+ configuration of the LSI and supports the following functions,
+ - Trust zone control
+ - Extend access by specific masters to address beyond 4GB space
+ - GBETH configuration
+ - Control of settings and states of SRAM/PCIe/CM33/CA55/CR8/xSPI/ADC/TSU
+ - LSI version
+ - WDT stop control
+ - General registers
+
+properties:
+ compatible:
+ const: renesas,r9a09g057-sys
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ sys: system-controller@10430000 {
+ compatible = "renesas,r9a09g057-sys";
+ reg = <0x10430000 0x10000>;
+ clocks = <&cpg 1>;
+ resets = <&cpg 1>;
+ };
diff --git a/dts/upstream/Bindings/soc/renesas/renesas.yaml b/dts/upstream/Bindings/soc/renesas/renesas.yaml
index c1ce4da..09d3ce9 100644
--- a/dts/upstream/Bindings/soc/renesas/renesas.yaml
+++ b/dts/upstream/Bindings/soc/renesas/renesas.yaml
@@ -513,6 +513,14 @@ properties:
- renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0
- const: renesas,r9a09g011
+ - description: RZ/V2H(P) (R9A09G057)
+ items:
+ - enum:
+ - renesas,r9a09g057h41 # RZ/V2H
+ - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support
+ - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support
+ - const: renesas,r9a09g057
+
additionalProperties: true
...
diff --git a/dts/upstream/Bindings/soc/samsung/samsung,exynos-sysreg.yaml b/dts/upstream/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
index c0c6ce8..3ca2205 100644
--- a/dts/upstream/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
+++ b/dts/upstream/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
@@ -15,6 +15,7 @@ properties:
- items:
- enum:
- google,gs101-apm-sysreg
+ - google,gs101-hsi2-sysreg
- google,gs101-peric0-sysreg
- google,gs101-peric1-sysreg
- samsung,exynos3-sysreg
@@ -72,6 +73,7 @@ allOf:
compatible:
contains:
enum:
+ - google,gs101-hsi2-sysreg
- google,gs101-peric0-sysreg
- google,gs101-peric1-sysreg
- samsung,exynos850-cmgp-sysreg
diff --git a/dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml
index b86f6f5..7140c31 100644
--- a/dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml
+++ b/dts/upstream/Bindings/soc/tegra/nvidia,tegra20-pmc.yaml
@@ -365,9 +365,9 @@ allOf:
additionalProperties: false
dependencies:
- "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
- "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
- "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+ nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+ nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"]
+ nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"]
examples:
- |
diff --git a/dts/upstream/Bindings/sound/davinci-mcbsp.txt b/dts/upstream/Bindings/sound/davinci-mcbsp.txt
deleted file mode 100644
index 3ffc256..0000000
--- a/dts/upstream/Bindings/sound/davinci-mcbsp.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Texas Instruments DaVinci McBSP module
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-This binding describes the "Multi-channel Buffered Serial Port" (McBSP)
-audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x.
-
-
-Required properties:
-~~~~~~~~~~~~~~~~~~~~
-- compatible :
- "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms
-
-- reg : physical base address and length of the controller memory mapped
- region(s).
-- reg-names : Should contain:
- * "mpu" for the main registers (required).
- * "dat" for the data FIFO (optional).
-
-- dmas: three element list of DMA controller phandles, DMA request line and
- TC channel ordered triplets.
-- dma-names: identifier string for each DMA request line in the dmas property.
- These strings correspond 1:1 with the ordered pairs in dmas. The dma
- identifiers must be "rx" and "tx".
-
-Optional properties:
-~~~~~~~~~~~~~~~~~~~~
-- interrupts : Interrupt numbers for McBSP
-- interrupt-names : Known interrupt names are "rx" and "tx"
-
-- pinctrl-0: Should specify pin control group used for this controller.
-- pinctrl-names: Should contain only one value - "default", for more details
- please refer to pinctrl-bindings.txt
-
-Example (AM1808):
-~~~~~~~~~~~~~~~~~
-
-mcbsp0: mcbsp@1d10000 {
- compatible = "ti,da850-mcbsp";
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp0_pins>;
-
- reg = <0x00110000 0x1000>,
- <0x00310000 0x1000>;
- reg-names = "mpu", "dat";
- interrupts = <97 98>;
- interrupt-names = "rx", "tx";
- dmas = <&edma0 3 1
- &edma0 2 1>;
- dma-names = "tx", "rx";
-};
diff --git a/dts/upstream/Bindings/sound/davinci-mcbsp.yaml b/dts/upstream/Bindings/sound/davinci-mcbsp.yaml
new file mode 100644
index 0000000..4fa6770
--- /dev/null
+++ b/dts/upstream/Bindings/sound/davinci-mcbsp.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/davinci-mcbsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: McBSP Controller for TI SoCs
+
+maintainers:
+ - Bastien Curutchet <bastien.curutchet@bootlin.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,da850-mcbsp
+
+ reg:
+ minItems: 1
+ items:
+ - description: CFG registers
+ - description: data registers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: mpu
+ - const: dat
+
+ dmas:
+ items:
+ - description: transmission DMA channel
+ - description: reception DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ items:
+ - description: RX interrupt
+ - description: TX interrupt
+
+ interrupt-names:
+ items:
+ - const: rx
+ - const: tx
+
+ clocks:
+ minItems: 1
+ items:
+ - description: functional clock
+ - description: external input clock for sample rate generator.
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: fck
+ - const: clks
+
+ power-domains:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ ti,T1-framing-tx:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If the property is present, tx data delay is set to 2 bit clock periods.
+ McBSP will insert a blank period (high-impedance period) before the first
+ data bit. This can be used to interface to T1-framing devices.
+
+ ti,T1-framing-rx:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If the property is present, rx data delay is set to 2 bit clock periods.
+ McBSP will discard the bit preceding the data stream (called framing bit).
+ This can be used to interface to T1-framing devices.
+
+required:
+ - "#sound-dai-cells"
+ - compatible
+ - reg
+ - reg-names
+ - dmas
+ - dma-names
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mcbsp0@1d10000 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,da850-mcbsp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp0_pins>;
+
+ reg = <0x111000 0x1000>,
+ <0x311000 0x1000>;
+ reg-names = "mpu", "dat";
+ interrupts = <97>, <98>;
+ interrupt-names = "rx", "tx";
+ dmas = <&edma0 3 1>,
+ <&edma0 2 1>;
+ dma-names = "tx", "rx";
+
+ clocks = <&psc1 14>;
+ };
diff --git a/dts/upstream/Bindings/sound/fsl,audmix.txt b/dts/upstream/Bindings/sound/fsl,audmix.txt
deleted file mode 100644
index 840b7e0..0000000
--- a/dts/upstream/Bindings/sound/fsl,audmix.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-NXP Audio Mixer (AUDMIX).
-
-The Audio Mixer is a on-chip functional module that allows mixing of two
-audio streams into a single audio stream. Audio Mixer has two input serial
-audio interfaces. These are driven by two Synchronous Audio interface
-modules (SAI). Each input serial interface carries 8 audio channels in its
-frame in TDM manner. Mixer mixes audio samples of corresponding channels
-from two interfaces into a single sample. Before mixing, audio samples of
-two inputs can be attenuated based on configuration. The output of the
-Audio Mixer is also a serial audio interface. Like input interfaces it has
-the same TDM frame format. This output is used to drive the serial DAC TDM
-interface of audio codec and also sent to the external pins along with the
-receive path of normal audio SAI module for readback by the CPU.
-
-The output of Audio Mixer can be selected from any of the three streams
- - serial audio input 1
- - serial audio input 2
- - mixed audio
-
-Mixing operation is independent of audio sample rate but the two audio
-input streams must have same audio sample rate with same number of channels
-in TDM frame to be eligible for mixing.
-
-Device driver required properties:
-=================================
- - compatible : Compatible list, contains "fsl,imx8qm-audmix"
-
- - reg : Offset and length of the register set for the device.
-
- - clocks : Must contain an entry for each entry in clock-names.
-
- - clock-names : Must include the "ipg" for register access.
-
- - power-domains : Must contain the phandle to AUDMIX power domain node
-
- - dais : Must contain a list of phandles to AUDMIX connected
- DAIs. The current implementation requires two phandles
- to SAI interfaces to be provided, the first SAI in the
- list being used to route the AUDMIX output.
-
-Device driver configuration example:
-======================================
- audmix: audmix@59840000 {
- compatible = "fsl,imx8qm-audmix";
- reg = <0x0 0x59840000 0x0 0x10000>;
- clocks = <&clk IMX8QXP_AUD_AUDMIX_IPG>;
- clock-names = "ipg";
- power-domains = <&pd_audmix>;
- dais = <&sai4>, <&sai5>;
- };
diff --git a/dts/upstream/Bindings/sound/fsl,audmix.yaml b/dts/upstream/Bindings/sound/fsl,audmix.yaml
new file mode 100644
index 0000000..9413b90
--- /dev/null
+++ b/dts/upstream/Bindings/sound/fsl,audmix.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,audmix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio Mixer (AUDMIX).
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ The Audio Mixer is a on-chip functional module that allows mixing of two
+ audio streams into a single audio stream. Audio Mixer has two input serial
+ audio interfaces. These are driven by two Synchronous Audio interface
+ modules (SAI). Each input serial interface carries 8 audio channels in its
+ frame in TDM manner. Mixer mixes audio samples of corresponding channels
+ from two interfaces into a single sample. Before mixing, audio samples of
+ two inputs can be attenuated based on configuration. The output of the
+ Audio Mixer is also a serial audio interface. Like input interfaces it has
+ the same TDM frame format. This output is used to drive the serial DAC TDM
+ interface of audio codec and also sent to the external pins along with the
+ receive path of normal audio SAI module for readback by the CPU.
+
+ The output of Audio Mixer can be selected from any of the three streams
+ - serial audio input 1
+ - serial audio input 2
+ - mixed audio
+
+ Mixing operation is independent of audio sample rate but the two audio
+ input streams must have same audio sample rate with same number of channels
+ in TDM frame to be eligible for mixing.
+
+properties:
+ compatible:
+ const: fsl,imx8qm-audmix
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ipg
+
+ power-domains:
+ maxItems: 1
+
+ dais:
+ description: contain a list of phandles to AUDMIX connected DAIs.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 2
+ items:
+ - description: the AUDMIX output
+ maxItems: 1
+ - description: serial audio input 1
+ maxItems: 1
+ - description: serial audio input 2
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+ - dais
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ audmix@59840000 {
+ compatible = "fsl,imx8qm-audmix";
+ reg = <0x59840000 0x10000>;
+ clocks = <&amix_lpcg 0>;
+ clock-names = "ipg";
+ power-domains = <&pd_audmix>;
+ dais = <&sai4>, <&sai5>;
+ };
diff --git a/dts/upstream/Bindings/sound/fsl,esai.txt b/dts/upstream/Bindings/sound/fsl,esai.txt
deleted file mode 100644
index 90112ca..0000000
--- a/dts/upstream/Bindings/sound/fsl,esai.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Freescale Enhanced Serial Audio Interface (ESAI) Controller
-
-The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
-for serial communication with a variety of serial devices, including industry
-standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
-other DSPs. It has up to six transmitters and four receivers.
-
-Required properties:
-
- - compatible : Compatible list, should contain one of the following
- compatibles:
- "fsl,imx35-esai",
- "fsl,vf610-esai",
- "fsl,imx6ull-esai",
- "fsl,imx8qm-esai",
-
- - reg : Offset and length of the register set for the device.
-
- - interrupts : Contains the spdif interrupt.
-
- - dmas : Generic dma devicetree binding as described in
- Documentation/devicetree/bindings/dma/dma.txt.
-
- - dma-names : Two dmas have to be defined, "tx" and "rx".
-
- - clocks : Contains an entry for each entry in clock-names.
-
- - clock-names : Includes the following entries:
- "core" The core clock used to access registers
- "extal" The esai baud clock for esai controller used to
- derive HCK, SCK and FS.
- "fsys" The system clock derived from ahb clock used to
- derive HCK, SCK and FS.
- "spba" The spba clock is required when ESAI is placed as a
- bus slave of the Shared Peripheral Bus and when two
- or more bus masters (CPU, DMA or DSP) try to access
- it. This property is optional depending on the SoC
- design.
-
- - fsl,fifo-depth : The number of elements in the transmit and receive
- FIFOs. This number is the maximum allowed value for
- TFCR[TFWM] or RFCR[RFWM].
-
- - fsl,esai-synchronous: This is a boolean property. If present, indicating
- that ESAI would work in the synchronous mode, which
- means all the settings for Receiving would be
- duplicated from Transmission related registers.
-
-Optional properties:
-
- - big-endian : If this property is absent, the native endian mode
- will be in use as default, or the big endian mode
- will be in use for all the device registers.
-
-Example:
-
-esai: esai@2024000 {
- compatible = "fsl,imx35-esai";
- reg = <0x02024000 0x4000>;
- interrupts = <0 51 0x04>;
- clocks = <&clks 208>, <&clks 118>, <&clks 208>;
- clock-names = "core", "extal", "fsys";
- dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
- dma-names = "rx", "tx";
- fsl,fifo-depth = <128>;
- fsl,esai-synchronous;
- big-endian;
-};
diff --git a/dts/upstream/Bindings/sound/fsl,esai.yaml b/dts/upstream/Bindings/sound/fsl,esai.yaml
new file mode 100644
index 0000000..f99ed20
--- /dev/null
+++ b/dts/upstream/Bindings/sound/fsl,esai.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,esai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Enhanced Serial Audio Interface (ESAI) Controller
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
+ for serial communication with a variety of serial devices, including industry
+ standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
+ other DSPs. It has up to six transmitters and four receivers.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx35-esai
+ - fsl,imx6ull-esai
+ - fsl,imx8qm-esai
+ - fsl,vf610-esai
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ items:
+ - description:
+ The core clock used to access registers.
+ - description:
+ The esai baud clock for esai controller used to
+ derive HCK, SCK and FS.
+ - description:
+ The system clock derived from ahb clock used to
+ derive HCK, SCK and FS.
+ - description:
+ The spba clock is required when ESAI is placed as a
+ bus slave of the Shared Peripheral Bus and when two
+ or more bus masters (CPU, DMA or DSP) try to access
+ it. This property is optional depending on the SoC
+ design.
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: core
+ - const: extal
+ - const: fsys
+ - const: spba
+
+ dmas:
+ minItems: 2
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ fsl,fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 64
+ description:
+ The number of elements in the transmit and receive
+ FIFOs. This number is the maximum allowed value for
+ TFCR[TFWM] or RFCR[RFWM].
+
+ fsl,esai-synchronous:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ This is a boolean property. If present, indicating
+ that ESAI would work in the synchronous mode, which
+ means all the settings for Receiving would be
+ duplicated from Transmission related registers.
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If this property is absent, the native endian mode
+ will be in use as default, or the big endian mode
+ will be in use for all the device registers.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: dai-common.yaml#
+
+examples:
+ - |
+ esai@2024000 {
+ compatible = "fsl,imx35-esai";
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ clocks = <&clks 208>, <&clks 118>, <&clks 208>;
+ clock-names = "core", "extal", "fsys";
+ dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <128>;
+ fsl,esai-synchronous;
+ big-endian;
+ };
diff --git a/dts/upstream/Bindings/sound/fsl,imx-asrc.yaml b/dts/upstream/Bindings/sound/fsl,imx-asrc.yaml
index bfef2fc..76aa1f2 100644
--- a/dts/upstream/Bindings/sound/fsl,imx-asrc.yaml
+++ b/dts/upstream/Bindings/sound/fsl,imx-asrc.yaml
@@ -74,6 +74,9 @@ properties:
- const: asrck_f
- const: spba
+ power-domains:
+ maxItems: 1
+
fsl,asrc-rate:
$ref: /schemas/types.yaml#/definitions/uint32
description: The mutual sample rate used by DPCM Back Ends
@@ -131,6 +134,17 @@ allOf:
properties:
fsl,asrc-clk-map: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-asrc
+ - fsl,imx8qxp-asrc
+ then:
+ required:
+ - power-domains
+
additionalProperties: false
examples:
diff --git a/dts/upstream/Bindings/sound/fsl,imx-audio-spdif.yaml b/dts/upstream/Bindings/sound/fsl,imx-audio-spdif.yaml
new file mode 100644
index 0000000..5fc543d
--- /dev/null
+++ b/dts/upstream/Bindings/sound/fsl,imx-audio-spdif.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-audio-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX audio complex with S/PDIF transceiver
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx-sabreauto-spdif
+ - fsl,imx6sx-sdb-spdif
+ - const: fsl,imx-audio-spdif
+ - enum:
+ - fsl,imx-audio-spdif
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+ spdif-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of the i.MX S/PDIF controller
+
+ spdif-out:
+ type: boolean
+ description:
+ If present, the transmitting function of S/PDIF will be enabled,
+ indicating there's a physical S/PDIF out connector or jack on the
+ board or it's connecting to some other IP block, such as an HDMI
+ encoder or display-controller.
+
+ spdif-in:
+ type: boolean
+ description:
+ If present, the receiving function of S/PDIF will be enabled,
+ indicating there is a physical S/PDIF in connector/jack on the board.
+
+required:
+ - compatible
+ - model
+ - spdif-controller
+
+anyOf:
+ - required:
+ - spdif-in
+ - required:
+ - spdif-out
+
+additionalProperties: false
+
+examples:
+ - |
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-out;
+ spdif-in;
+ };
diff --git a/dts/upstream/Bindings/sound/fsl,sai.yaml b/dts/upstream/Bindings/sound/fsl,sai.yaml
index 2456d95..a5d9c24 100644
--- a/dts/upstream/Bindings/sound/fsl,sai.yaml
+++ b/dts/upstream/Bindings/sound/fsl,sai.yaml
@@ -81,14 +81,12 @@ properties:
dmas:
minItems: 1
- items:
- - description: DMA controller phandle and request line for RX
- - description: DMA controller phandle and request line for TX
+ maxItems: 2
dma-names:
minItems: 1
items:
- - const: rx
+ - enum: [ rx, tx ]
- const: tx
interrupts:
diff --git a/dts/upstream/Bindings/sound/fsl,spdif.yaml b/dts/upstream/Bindings/sound/fsl,spdif.yaml
index 1d64e83..204f361 100644
--- a/dts/upstream/Bindings/sound/fsl,spdif.yaml
+++ b/dts/upstream/Bindings/sound/fsl,spdif.yaml
@@ -31,7 +31,10 @@ properties:
maxItems: 1
interrupts:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: Combined or receive interrupt
+ - description: Transmit interrupt
dmas:
items:
@@ -86,6 +89,9 @@ properties:
registers. Set this flag for HCDs with big endian descriptors and big
endian registers.
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
@@ -97,6 +103,33 @@ required:
additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-spdif
+ - fsl,imx8qxp-spdif
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-spdif
+ - fsl,imx8qxp-spdif
+ then:
+ required:
+ - power-domains
+
examples:
- |
spdif@2004000 {
diff --git a/dts/upstream/Bindings/sound/fsl,ssi.txt b/dts/upstream/Bindings/sound/fsl,ssi.txt
deleted file mode 100644
index 7e15a85..0000000
--- a/dts/upstream/Bindings/sound/fsl,ssi.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-Freescale Synchronous Serial Interface
-
-The SSI is a serial device that communicates with audio codecs. It can
-be programmed in AC97, I2S, left-justified, or right-justified modes.
-
-Required properties:
-- compatible: Compatible list, should contain one of the following
- compatibles:
- fsl,mpc8610-ssi
- fsl,imx51-ssi
- fsl,imx35-ssi
- fsl,imx21-ssi
-- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
-- reg: Offset and length of the register set for the device.
-- interrupts: <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and
- level information for the interrupt. This should be
- encoded based on the information in section 2)
- depending on the type of interrupt controller you
- have.
-- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
- This number is the maximum allowed value for SFCSR[TFWM0].
- - clocks: "ipg" - Required clock for the SSI unit
- "baud" - Required clock for SSI master mode. Otherwise this
- clock is not used
-
-Required are also ac97 link bindings if ac97 is used. See
-Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary
-bindings.
-
-Optional properties:
-- codec-handle: Phandle to a 'codec' node that defines an audio
- codec connected to this SSI. This node is typically
- a child of an I2C or other control node.
-- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to
- filter the codec stream. This is necessary for some boards
- where an incompatible codec is connected to this SSI, e.g.
- on pca100 and pcm043.
-- dmas: Generic dma devicetree binding as described in
- Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
- is not defined.
-- fsl,mode: The operating mode for the AC97 interface only.
- "ac97-slave" - AC97 mode, SSI is clock slave
- "ac97-master" - AC97 mode, SSI is clock master
-- fsl,ssi-asynchronous:
- If specified, the SSI is to be programmed in asynchronous
- mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
- all be connected to valid signals. In synchronous mode,
- SRCK and SRFS are ignored. Asynchronous mode allows
- playback and capture to use different sample sizes and
- sample rates. Some drivers may require that SRCK and STCK
- be connected together, and SRFS and STFS be connected
- together. This would still allow different sample sizes,
- but not different sample rates.
-- fsl,playback-dma: Phandle to a node for the DMA channel to use for
- playback of audio. This is typically dictated by SOC
- design. See the notes below.
- Only used on Power Architecture.
-- fsl,capture-dma: Phandle to a node for the DMA channel to use for
- capture (recording) of audio. This is typically dictated
- by SOC design. See the notes below.
- Only used on Power Architecture.
-
-Child 'codec' node required properties:
-- compatible: Compatible list, contains the name of the codec
-
-Child 'codec' node optional properties:
-- clock-frequency: The frequency of the input clock, which typically comes
- from an on-board dedicated oscillator.
-
-Notes on fsl,playback-dma and fsl,capture-dma:
-
-On SOCs that have an SSI, specific DMA channels are hard-wired for playback
-and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
-playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
-playback and DMA channel 3 for capture. The developer can choose which
-DMA controller to use, but the channels themselves are hard-wired. The
-purpose of these two properties is to represent this hardware design.
-
-The device tree nodes for the DMA channels that are referenced by
-"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
-"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
-"fsl,mpc8610-dma-channel") can remain. If these nodes are left as
-"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
-drivers (fsldma) will attempt to use them, and it will conflict with the
-sound drivers.
diff --git a/dts/upstream/Bindings/sound/fsl,ssi.yaml b/dts/upstream/Bindings/sound/fsl,ssi.yaml
new file mode 100644
index 0000000..4ab10cd
--- /dev/null
+++ b/dts/upstream/Bindings/sound/fsl,ssi.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Synchronous Serial Interface
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description:
+ Notes on fsl,playback-dma and fsl,capture-dma
+ On SOCs that have an SSI, specific DMA channels are hard-wired for playback
+ and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
+ playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
+ playback and DMA channel 3 for capture. The developer can choose which
+ DMA controller to use, but the channels themselves are hard-wired. The
+ purpose of these two properties is to represent this hardware design.
+
+ The device tree nodes for the DMA channels that are referenced by
+ "fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
+ "fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
+ "fsl,mpc8610-dma-channel") can remain. If these nodes are left as
+ "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
+ drivers (fsldma) will attempt to use them, and it will conflict with the
+ sound drivers.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx50-ssi
+ - fsl,imx53-ssi
+ - const: fsl,imx51-ssi
+ - const: fsl,imx21-ssi
+ - items:
+ - enum:
+ - fsl,imx25-ssi
+ - fsl,imx27-ssi
+ - fsl,imx35-ssi
+ - fsl,imx51-ssi
+ - const: fsl,imx21-ssi
+ - items:
+ - enum:
+ - fsl,imx6q-ssi
+ - fsl,imx6sl-ssi
+ - fsl,imx6sx-ssi
+ - const: fsl,imx51-ssi
+ - items:
+ - const: fsl,imx21-ssi
+ - items:
+ - const: fsl,mpc8610-ssi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The ipg clock for register access
+ - description: clock for SSI master mode
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: baud
+ minItems: 1
+
+ dmas:
+ oneOf:
+ - items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+ - items:
+ - description: DMA controller phandle and request line for RX0
+ - description: DMA controller phandle and request line for TX0
+ - description: DMA controller phandle and request line for RX1
+ - description: DMA controller phandle and request line for TX1
+
+ dma-names:
+ oneOf:
+ - items:
+ - const: rx
+ - const: tx
+ - items:
+ - const: rx0
+ - const: tx0
+ - const: rx1
+ - const: tx1
+
+ "#sound-dai-cells":
+ const: 0
+ description: optional, some dts node didn't add it.
+
+ cell-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ description: The SSI index
+
+ ac97-gpios:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: Please refer to soc-ac97link.txt
+
+ codec-handle:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to a 'codec' node that defines an audio
+ codec connected to this SSI. This node is typically
+ a child of an I2C or other control node.
+
+ fsl,fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The number of elements in the transmit and receive FIFOs.
+ This number is the maximum allowed value for SFCSR[TFWM0].
+ enum: [8, 15]
+
+ fsl,fiq-stream-filter:
+ type: boolean
+ description:
+ Disabled DMA and use FIQ instead to filter the codec stream.
+ This is necessary for some boards where an incompatible codec
+ is connected to this SSI, e.g. on pca100 and pcm043.
+
+ fsl,mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ ac97-slave, ac97-master, i2s-slave, i2s-master,
+ lj-slave, lj-master, rj-slave, rj-master ]
+ description: |
+ "ac97-slave" - AC97 mode, SSI is clock slave
+ "ac97-master" - AC97 mode, SSI is clock master
+ "i2s-slave" - I2S mode, SSI is clock slave
+ "i2s-master" - I2S mode, SSI is clock master
+ "lj-slave" - Left justified mode, SSI is clock slave
+ "lj-master" - Left justified mode, SSI is clock master
+ "rj-slave" - Right justified mode, SSI is clock slave
+ "rj-master" - Right justified mode, SSI is clock master
+
+ fsl,ssi-asynchronous:
+ type: boolean
+ description: If specified, the SSI is to be programmed in asynchronous
+ mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
+ all be connected to valid signals. In synchronous mode,
+ SRCK and SRFS are ignored. Asynchronous mode allows
+ playback and capture to use different sample sizes and
+ sample rates. Some drivers may require that SRCK and STCK
+ be connected together, and SRFS and STFS be connected
+ together. This would still allow different sample sizes,
+ but not different sample rates.
+
+ fsl,playback-dma:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to a node for the DMA channel to use for
+ playback of audio. This is typically dictated by SOC
+ design. Only used on Power Architecture.
+
+ fsl,capture-dma:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to a node for the DMA channel to use for
+ capture (recording) of audio. This is typically dictated
+ by SOC design. Only used on Power Architecture.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - fsl,fifo-depth
+
+allOf:
+ - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ ssi@2028000 {
+ compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi";
+ reg = <0x02028000 0x4000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
+ <&clks IMX6QDL_CLK_SSI1>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
+ dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
+ fsl,fifo-depth = <15>;
+ };
diff --git a/dts/upstream/Bindings/sound/fsl-asoc-card.txt b/dts/upstream/Bindings/sound/fsl-asoc-card.txt
deleted file mode 100644
index 4e8dbc5..0000000
--- a/dts/upstream/Bindings/sound/fsl-asoc-card.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-Freescale Generic ASoC Sound Card with ASRC support
-
-The Freescale Generic ASoC Sound Card can be used, ideally, for all Freescale
-SoCs connecting with external CODECs.
-
-The idea of this generic sound card is a bit like ASoC Simple Card. However,
-for Freescale SoCs (especially those released in recent years), most of them
-have ASRC (Documentation/devicetree/bindings/sound/fsl,asrc.txt) inside. And
-this is a specific feature that might be painstakingly controlled and merged
-into the Simple Card.
-
-So having this generic sound card allows all Freescale SoC users to benefit
-from the simplification of a new card support and the capability of the wide
-sample rates support through ASRC.
-
-Note: The card is initially designed for those sound cards who use AC'97, I2S
- and PCM DAI formats. However, it'll be also possible to support those non
- AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as
- long as the driver has been properly upgraded.
-
-
-The compatible list for this generic sound card currently:
- "fsl,imx-audio-ac97"
-
- "fsl,imx-audio-cs42888"
-
- "fsl,imx-audio-cs427x"
- (compatible with CS4271 and CS4272)
-
- "fsl,imx-audio-wm8962"
-
- "fsl,imx-audio-sgtl5000"
- (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
-
- "fsl,imx-audio-wm8960"
-
- "fsl,imx-audio-mqs"
-
- "fsl,imx-audio-wm8524"
-
- "fsl,imx-audio-tlv320aic32x4"
-
- "fsl,imx-audio-tlv320aic31xx"
-
- "fsl,imx-audio-si476x"
-
- "fsl,imx-audio-wm8958"
-
- "fsl,imx-audio-nau8822"
-
-Required properties:
-
- - compatible : Contains one of entries in the compatible list.
-
- - model : The user-visible name of this sound complex
-
- - audio-cpu : The phandle of an CPU DAI controller
-
- - audio-codec : The phandle of an audio codec
-
-Optional properties:
-
- - audio-asrc : The phandle of ASRC. It can be absent if there's no
- need to add ASRC support via DPCM.
-
- - audio-routing : A list of the connections between audio components.
- Each entry is a pair of strings, the first being the
- connection's sink, the second being the connection's
- source. There're a few pre-designed board connectors:
- * Line Out Jack
- * Line In Jack
- * Headphone Jack
- * Mic Jack
- * Ext Spk
- * AMIC (stands for Analog Microphone Jack)
- * DMIC (stands for Digital Microphone Jack)
-
- Note: The "Mic Jack" and "AMIC" are redundant while
- coexisting in order to support the old bindings
- of wm8962 and sgtl5000.
-
- - hp-det-gpio : The GPIO that detect headphones are plugged in
- - mic-det-gpio : The GPIO that detect microphones are plugged in
- - bitclock-master : Indicates dai-link bit clock master; for details see simple-card.yaml.
- - frame-master : Indicates dai-link frame master; for details see simple-card.yaml.
- - dai-format : audio format, for details see simple-card.yaml.
- - frame-inversion : dai-link uses frame clock inversion, for details see simple-card.yaml.
- - bitclock-inversion : dai-link uses bit clock inversion, for details see simple-card.yaml.
- - mclk-id : main clock id, specific for each card configuration.
-
-Optional unless SSI is selected as a CPU DAI:
-
- - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
-
- - mux-ext-port : The external port of the i.MX audio muxer
-
-Example:
-sound-cs42888 {
- compatible = "fsl,imx-audio-cs42888";
- model = "cs42888-audio";
- audio-cpu = <&esai>;
- audio-asrc = <&asrc>;
- audio-codec = <&cs42888>;
- audio-routing =
- "Line Out Jack", "AOUT1L",
- "Line Out Jack", "AOUT1R",
- "Line Out Jack", "AOUT2L",
- "Line Out Jack", "AOUT2R",
- "Line Out Jack", "AOUT3L",
- "Line Out Jack", "AOUT3R",
- "Line Out Jack", "AOUT4L",
- "Line Out Jack", "AOUT4R",
- "AIN1L", "Line In Jack",
- "AIN1R", "Line In Jack",
- "AIN2L", "Line In Jack",
- "AIN2R", "Line In Jack";
-};
diff --git a/dts/upstream/Bindings/sound/fsl-asoc-card.yaml b/dts/upstream/Bindings/sound/fsl-asoc-card.yaml
new file mode 100644
index 0000000..9922664
--- /dev/null
+++ b/dts/upstream/Bindings/sound/fsl-asoc-card.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl-asoc-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Generic ASoC Sound Card with ASRC support
+
+description:
+ The Freescale Generic ASoC Sound Card can be used, ideally,
+ for all Freescale SoCs connecting with external CODECs.
+
+ The idea of this generic sound card is a bit like ASoC Simple Card.
+ However, for Freescale SoCs (especially those released in recent years),
+ most of them have ASRC inside. And this is a specific feature that might
+ be painstakingly controlled and merged into the Simple Card.
+
+ So having this generic sound card allows all Freescale SoC users to
+ benefit from the simplification of a new card support and the capability
+ of the wide sample rates support through ASRC.
+
+ Note, The card is initially designed for those sound cards who use AC'97, I2S
+ and PCM DAI formats. However, it'll be also possible to support those non
+ AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as
+ long as the driver has been properly upgraded.
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx-sgtl5000
+ - fsl,imx25-pdk-sgtl5000
+ - fsl,imx53-cpuvo-sgtl5000
+ - fsl,imx51-babbage-sgtl5000
+ - fsl,imx53-m53evk-sgtl5000
+ - fsl,imx53-qsb-sgtl5000
+ - fsl,imx53-voipac-sgtl5000
+ - fsl,imx6-armadeus-sgtl5000
+ - fsl,imx6-rex-sgtl5000
+ - fsl,imx6-sabreauto-cs42888
+ - fsl,imx6-wandboard-sgtl5000
+ - fsl,imx6dl-nit6xlite-sgtl5000
+ - fsl,imx6q-ba16-sgtl5000
+ - fsl,imx6q-nitrogen6_max-sgtl5000
+ - fsl,imx6q-nitrogen6_som2-sgtl5000
+ - fsl,imx6q-nitrogen6x-sgtl5000
+ - fsl,imx6q-sabrelite-sgtl5000
+ - fsl,imx6q-sabresd-wm8962
+ - fsl,imx6q-udoo-ac97
+ - fsl,imx6q-ventana-sgtl5000
+ - fsl,imx6sl-evk-wm8962
+ - fsl,imx6sx-sdb-mqs
+ - fsl,imx6sx-sdb-wm8962
+ - fsl,imx7d-evk-wm8960
+ - karo,tx53-audio-sgtl5000
+ - tq,imx53-mba53-sgtl5000
+ - enum:
+ - fsl,imx-audio-ac97
+ - fsl,imx-audio-cs42888
+ - fsl,imx-audio-mqs
+ - fsl,imx-audio-sgtl5000
+ - fsl,imx-audio-wm8960
+ - fsl,imx-audio-wm8962
+ - items:
+ - enum:
+ - fsl,imx-audio-ac97
+ - fsl,imx-audio-cs42888
+ - fsl,imx-audio-cs427x
+ - fsl,imx-audio-mqs
+ - fsl,imx-audio-nau8822
+ - fsl,imx-audio-sgtl5000
+ - fsl,imx-audio-si476x
+ - fsl,imx-audio-tlv320aic31xx
+ - fsl,imx-audio-tlv320aic32x4
+ - fsl,imx-audio-wm8524
+ - fsl,imx-audio-wm8904
+ - fsl,imx-audio-wm8960
+ - fsl,imx-audio-wm8962
+ - fsl,imx-audio-wm8958
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The user-visible name of this sound complex
+
+ audio-asrc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle of ASRC. It can be absent if there's no
+ need to add ASRC support via DPCM.
+
+ audio-codec:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of an audio codec
+
+ audio-cpu:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of an CPU DAI controller
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description:
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source. There're a few pre-designed board
+ connectors. "AMIC" stands for Analog Microphone Jack.
+ "DMIC" stands for Digital Microphone Jack. The "Mic Jack" and "AMIC"
+ are redundant while coexisting in order to support the old bindings
+ of wm8962 and sgtl5000.
+
+ hp-det-gpio:
+ deprecated: true
+ maxItems: 1
+ description: The GPIO that detect headphones are plugged in
+
+ hp-det-gpios:
+ maxItems: 1
+ description: The GPIO that detect headphones are plugged in
+
+ mic-det-gpio:
+ deprecated: true
+ maxItems: 1
+ description: The GPIO that detect microphones are plugged in
+
+ mic-det-gpios:
+ maxItems: 1
+ description: The GPIO that detect microphones are plugged in
+
+ bitclock-master:
+ $ref: simple-card.yaml#/definitions/bitclock-master
+ description: Indicates dai-link bit clock master.
+
+ frame-master:
+ $ref: simple-card.yaml#/definitions/frame-master
+ description: Indicates dai-link frame master.
+
+ format:
+ $ref: simple-card.yaml#/definitions/format
+ description: audio format.
+
+ frame-inversion:
+ $ref: simple-card.yaml#/definitions/frame-inversion
+ description: dai-link uses frame clock inversion.
+
+ bitclock-inversion:
+ $ref: simple-card.yaml#/definitions/bitclock-inversion
+ description: dai-link uses bit clock inversion.
+
+ mclk-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: main clock id, specific for each card configuration.
+
+ mux-int-port:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 7]
+ description: The internal port of the i.MX audio muxer (AUDMUX)
+
+ mux-ext-port:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [3, 4, 5, 6]
+ description: The external port of the i.MX audio muxer
+
+ ssi-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of an CPU DAI controller
+
+required:
+ - compatible
+ - model
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sound-cs42888 {
+ compatible = "fsl,imx-audio-cs42888";
+ model = "cs42888-audio";
+ audio-cpu = <&esai>;
+ audio-asrc = <&asrc>;
+ audio-codec = <&cs42888>;
+ audio-routing =
+ "Line Out Jack", "AOUT1L",
+ "Line Out Jack", "AOUT1R",
+ "Line Out Jack", "AOUT2L",
+ "Line Out Jack", "AOUT2R",
+ "Line Out Jack", "AOUT3L",
+ "Line Out Jack", "AOUT3R",
+ "Line Out Jack", "AOUT4L",
+ "Line Out Jack", "AOUT4R",
+ "AIN1L", "Line In Jack",
+ "AIN1R", "Line In Jack",
+ "AIN2L", "Line In Jack",
+ "AIN2R", "Line In Jack";
+ };
diff --git a/dts/upstream/Bindings/sound/imx-audio-spdif.txt b/dts/upstream/Bindings/sound/imx-audio-spdif.txt
deleted file mode 100644
index da84a44..0000000
--- a/dts/upstream/Bindings/sound/imx-audio-spdif.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Freescale i.MX audio complex with S/PDIF transceiver
-
-Required properties:
-
- - compatible : "fsl,imx-audio-spdif"
-
- - model : The user-visible name of this sound complex
-
- - spdif-controller : The phandle of the i.MX S/PDIF controller
-
-
-Optional properties:
-
- - spdif-out : This is a boolean property. If present, the
- transmitting function of S/PDIF will be enabled,
- indicating there's a physical S/PDIF out connector
- or jack on the board or it's connecting to some
- other IP block, such as an HDMI encoder or
- display-controller.
-
- - spdif-in : This is a boolean property. If present, the receiving
- function of S/PDIF will be enabled, indicating there
- is a physical S/PDIF in connector/jack on the board.
-
-* Note: At least one of these two properties should be set in the DT binding.
-
-
-Example:
-
-sound-spdif {
- compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
- spdif-controller = <&spdif>;
- spdif-out;
- spdif-in;
-};
diff --git a/dts/upstream/Bindings/sound/mediatek,mt2701-wm8960.yaml b/dts/upstream/Bindings/sound/mediatek,mt2701-wm8960.yaml
new file mode 100644
index 0000000..cf98546
--- /dev/null
+++ b/dts/upstream/Bindings/sound/mediatek,mt2701-wm8960.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt2701-wm8960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT2701 with WM8960 CODEC
+
+maintainers:
+ - Kartik Agarwala <agarwala.kartik@gmail.com>
+
+properties:
+ compatible:
+ const: mediatek,mt2701-wm8960-machine
+
+ mediatek,platform:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of MT2701 ASoC platform.
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description:
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+
+ mediatek,audio-codec:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of the WM8960 audio codec.
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - mediatek,platform
+ - audio-routing
+ - mediatek,audio-codec
+ - pinctrl-names
+ - pinctrl-0
+
+examples:
+ - |
+ sound {
+ compatible = "mediatek,mt2701-wm8960-machine";
+ mediatek,platform = <&afe>;
+ audio-routing =
+ "Headphone", "HP_L",
+ "Headphone", "HP_R",
+ "LINPUT1", "AMIC",
+ "RINPUT1", "AMIC";
+ mediatek,audio-codec = <&wm8960>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&aud_pins_default>;
+ };
diff --git a/dts/upstream/Bindings/sound/mt2701-wm8960.txt b/dts/upstream/Bindings/sound/mt2701-wm8960.txt
deleted file mode 100644
index 809b609..0000000
--- a/dts/upstream/Bindings/sound/mt2701-wm8960.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-MT2701 with WM8960 CODEC
-
-Required properties:
-- compatible: "mediatek,mt2701-wm8960-machine"
-- mediatek,platform: the phandle of MT2701 ASoC platform
-- audio-routing: a list of the connections between audio
-- mediatek,audio-codec: the phandles of wm8960 codec
-- pinctrl-names: Should contain only one value - "default"
-- pinctrl-0: Should specify pin control groups used for this controller.
-
-Example:
-
- sound:sound {
- compatible = "mediatek,mt2701-wm8960-machine";
- mediatek,platform = <&afe>;
- audio-routing =
- "Headphone", "HP_L",
- "Headphone", "HP_R",
- "LINPUT1", "AMIC",
- "RINPUT1", "AMIC";
- mediatek,audio-codec = <&wm8960>;
- pinctrl-names = "default";
- pinctrl-0 = <&aud_pins_default>;
- };
diff --git a/dts/upstream/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/dts/upstream/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml
index 9853c11..cbc641e 100644
--- a/dts/upstream/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml
+++ b/dts/upstream/Bindings/sound/mt8186-mt6366-da7219-max98357.yaml
@@ -12,17 +12,46 @@ maintainers:
description:
This binding describes the MT8186 sound card.
+allOf:
+ - $ref: sound-card-common.yaml#
+
properties:
compatible:
enum:
- mediatek,mt8186-mt6366-da7219-max98357-sound
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description:
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+ Valid names could be the input or output widgets of audio components,
+ power supplies, MicBias of codec and the software switch.
+ minItems: 2
+ items:
+ enum:
+ # Sinks
+ - HDMI1
+ - Headphones
+ - Line Out
+ - MIC
+ - Speakers
+
+ # Sources
+ - Headset Mic
+ - HPL
+ - HPR
+ - Speaker
+ - TX
+
mediatek,platform:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of MT8186 ASoC platform.
headset-codec:
type: object
+ deprecated: true
additionalProperties: false
properties:
sound-dai:
@@ -32,6 +61,7 @@ properties:
playback-codecs:
type: object
+ deprecated: true
additionalProperties: false
properties:
sound-dai:
@@ -53,32 +83,115 @@ properties:
A list of the desired dai-links in the sound card. Each entry is a
name defined in the machine driver.
-additionalProperties: false
+patternProperties:
+ ".*-dai-link$":
+ type: object
+ additionalProperties: false
+ description:
+ Container for dai-link level properties and CODEC sub-nodes.
+
+ properties:
+ link-name:
+ description: Indicates dai-link name and PCM stream name
+ items:
+ enum:
+ - I2S0
+ - I2S1
+ - I2S2
+ - I2S3
+
+ codec:
+ description: Holds subnode which indicates codec dai.
+ type: object
+ additionalProperties: false
+ properties:
+ sound-dai:
+ minItems: 1
+ maxItems: 2
+ required:
+ - sound-dai
+
+ dai-format:
+ description: audio format
+ items:
+ enum:
+ - i2s
+ - right_j
+ - left_j
+ - dsp_a
+ - dsp_b
+
+ mediatek,clk-provider:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Indicates dai-link clock master.
+ items:
+ enum:
+ - cpu
+ - codec
+
+ required:
+ - link-name
+
+unevaluatedProperties: false
required:
- compatible
- mediatek,platform
- - headset-codec
- - playback-codecs
+
+# Disallow legacy properties if xxx-dai-link nodes are specified
+if:
+ not:
+ patternProperties:
+ ".*-dai-link$": false
+then:
+ properties:
+ headset-codec: false
+ speaker-codecs: false
examples:
- |
sound: mt8186-sound {
compatible = "mediatek,mt8186-mt6366-da7219-max98357-sound";
- mediatek,platform = <&afe>;
+ model = "mt8186_da7219_m98357";
pinctrl-names = "aud_clk_mosi_off",
"aud_clk_mosi_on";
pinctrl-0 = <&aud_clk_mosi_off>;
pinctrl-1 = <&aud_clk_mosi_on>;
+ mediatek,platform = <&afe>;
+
+ audio-routing =
+ "Headphones", "HPL",
+ "Headphones", "HPR",
+ "MIC", "Headset Mic",
+ "Speakers", "Speaker",
+ "HDMI1", "TX";
+
+ hs-playback-dai-link {
+ link-name = "I2S0";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&da7219>;
+ };
+ };
- headset-codec {
- sound-dai = <&da7219>;
+ hs-capture-dai-link {
+ link-name = "I2S1";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&da7219>;
+ };
};
- playback-codecs {
- sound-dai = <&anx_bridge_dp>,
- <&max98357a>;
+ spk-dp-playback-dai-link {
+ link-name = "I2S3";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&anx_bridge_dp>, <&max98357a>;
+ };
};
};
diff --git a/dts/upstream/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/dts/upstream/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
index bdf7b09..ed93f18 100644
--- a/dts/upstream/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
+++ b/dts/upstream/Bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
@@ -12,6 +12,9 @@ maintainers:
description:
This binding describes the MT8186 sound card.
+allOf:
+ - $ref: sound-card-common.yaml#
+
properties:
compatible:
enum:
@@ -19,6 +22,34 @@ properties:
- mediatek,mt8186-mt6366-rt5682s-max98360-sound
- mediatek,mt8186-mt6366-rt5650-sound
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description:
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+ Valid names could be the input or output widgets of audio components,
+ power supplies, MicBias of codec and the software switch.
+ minItems: 2
+ items:
+ enum:
+ # Sinks
+ - HDMI1
+ - Headphone
+ - IN1P
+ - IN1N
+ - Line Out
+ - Speakers
+
+ # Sources
+ - Headset Mic
+ - HPOL
+ - HPOR
+ - Speaker
+ - SPOL
+ - SPOR
+ - TX
+
mediatek,platform:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of MT8186 ASoC platform.
@@ -32,6 +63,7 @@ properties:
headset-codec:
type: object
+ deprecated: true
additionalProperties: false
properties:
sound-dai:
@@ -41,6 +73,7 @@ properties:
playback-codecs:
type: object
+ deprecated: true
additionalProperties: false
properties:
sound-dai:
@@ -62,13 +95,56 @@ properties:
A list of the desired dai-links in the sound card. Each entry is a
name defined in the machine driver.
-additionalProperties: false
+patternProperties:
+ ".*-dai-link$":
+ type: object
+ additionalProperties: false
+ description:
+ Container for dai-link level properties and CODEC sub-nodes.
+
+ properties:
+ link-name:
+ description: Indicates dai-link name and PCM stream name
+ enum: [ I2S0, I2S1, I2S2, I2S3 ]
+
+ codec:
+ description: Holds subnode which indicates codec dai.
+ type: object
+ additionalProperties: false
+ properties:
+ sound-dai:
+ minItems: 1
+ maxItems: 2
+ required:
+ - sound-dai
+
+ dai-format:
+ description: audio format
+ enum: [ i2s, right_j, left_j, dsp_a, dsp_b ]
+
+ mediatek,clk-provider:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Indicates dai-link clock master.
+ enum: [ cpu, codec ]
+
+ required:
+ - link-name
+
+unevaluatedProperties: false
required:
- compatible
- mediatek,platform
- - headset-codec
- - playback-codecs
+
+# Disallow legacy properties if xxx-dai-link nodes are specified
+if:
+ not:
+ patternProperties:
+ ".*-dai-link$": false
+then:
+ properties:
+ headset-codec: false
+ speaker-codecs: false
examples:
- |
@@ -76,23 +152,49 @@ examples:
sound: mt8186-sound {
compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
- mediatek,platform = <&afe>;
+ model = "mt8186_rt1019_rt5682s";
pinctrl-names = "aud_clk_mosi_off",
"aud_clk_mosi_on",
"aud_gpio_dmic_sec";
pinctrl-0 = <&aud_clk_mosi_off>;
pinctrl-1 = <&aud_clk_mosi_on>;
pinctrl-2 = <&aud_gpio_dmic_sec>;
+ mediatek,platform = <&afe>;
dmic-gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
- headset-codec {
- sound-dai = <&rt5682s>;
+ audio-routing =
+ "Headphone", "HPOL",
+ "Headphone", "HPOR",
+ "IN1P", "Headset Mic",
+ "Speakers", "Speaker",
+ "HDMI1", "TX";
+
+ hs-playback-dai-link {
+ link-name = "I2S0";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&rt5682s 0>;
+ };
+ };
+
+ hs-capture-dai-link {
+ link-name = "I2S1";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&rt5682s 0>;
+ };
};
- playback-codecs {
- sound-dai = <&it6505dptx>,
- <&rt1019p>;
+ spk-hdmi-playback-dai-link {
+ link-name = "I2S3";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&it6505dptx>, <&rt1019p>;
+ };
};
};
diff --git a/dts/upstream/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/dts/upstream/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
index 7e50f5d..c4e68f3 100644
--- a/dts/upstream/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
+++ b/dts/upstream/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
@@ -13,6 +13,9 @@ maintainers:
description:
This binding describes the MT8192 sound card.
+allOf:
+ - $ref: sound-card-common.yaml#
+
properties:
compatible:
enum:
@@ -20,6 +23,31 @@ properties:
- mediatek,mt8192_mt6359_rt1015p_rt5682
- mediatek,mt8192_mt6359_rt1015p_rt5682s
+ audio-routing:
+ description:
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+ Valid names could be the input or output widgets of audio components,
+ power supplies, MicBias of codec and the software switch.
+ minItems: 2
+ items:
+ enum:
+ # Sinks
+ - Speakers
+ - Headphone Jack
+ - IN1P
+ - Left Spk
+ - Right Spk
+
+ # Sources
+ - Headset Mic
+ - HPOL
+ - HPOR
+ - Left SPO
+ - Right SPO
+ - Speaker
+
mediatek,platform:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of MT8192 ASoC platform.
@@ -27,10 +55,12 @@ properties:
mediatek,hdmi-codec:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of HDMI codec.
+ deprecated: true
headset-codec:
type: object
additionalProperties: false
+ deprecated: true
properties:
sound-dai:
@@ -41,6 +71,7 @@ properties:
speaker-codecs:
type: object
additionalProperties: false
+ deprecated: true
properties:
sound-dai:
@@ -51,33 +82,121 @@ properties:
required:
- sound-dai
-additionalProperties: false
+patternProperties:
+ ".*-dai-link$":
+ type: object
+ additionalProperties: false
+
+ description:
+ Container for dai-link level properties and CODEC sub-nodes.
+
+ properties:
+ link-name:
+ description: Indicates dai-link name and PCM stream name
+ enum:
+ - I2S0
+ - I2S1
+ - I2S2
+ - I2S3
+ - I2S4
+ - I2S5
+ - I2S6
+ - I2S7
+ - I2S8
+ - I2S9
+ - TDM
+
+ codec:
+ description: Holds subnode which indicates codec dai.
+ type: object
+ additionalProperties: false
+ properties:
+ sound-dai:
+ minItems: 1
+ maxItems: 2
+ required:
+ - sound-dai
+
+ dai-format:
+ description: audio format
+ enum: [ i2s, right_j, left_j, dsp_a, dsp_b ]
+
+ mediatek,clk-provider:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Indicates dai-link clock master.
+ enum: [ cpu, codec ]
+
+ required:
+ - link-name
+
+unevaluatedProperties: false
required:
- compatible
- mediatek,platform
- - headset-codec
- - speaker-codecs
+
+# Disallow legacy properties if xxx-dai-link nodes are specified
+if:
+ not:
+ patternProperties:
+ ".*-dai-link$": false
+then:
+ properties:
+ headset-codec: false
+ speaker-codecs: false
+ mediatek,hdmi-codec: false
examples:
- |
sound: mt8192-sound {
compatible = "mediatek,mt8192_mt6359_rt1015_rt5682";
- mediatek,platform = <&afe>;
- mediatek,hdmi-codec = <&anx_bridge_dp>;
+ model = "mt8192_mt6359_rt1015_rt5682";
pinctrl-names = "aud_clk_mosi_off",
"aud_clk_mosi_on";
pinctrl-0 = <&aud_clk_mosi_off>;
pinctrl-1 = <&aud_clk_mosi_on>;
+ mediatek,platform = <&afe>;
+
+ audio-routing =
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR",
+ "IN1P", "Headset Mic",
+ "Speakers", "Speaker";
+
+ spk-playback-dai-link {
+ link-name = "I2S3";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&rt1015p>;
+ };
+ };
+
+ hs-playback-dai-link {
+ link-name = "I2S8";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&rt5682 0>;
+ };
+ };
- headset-codec {
- sound-dai = <&rt5682>;
+ hs-capture-dai-link {
+ link-name = "I2S9";
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&rt5682 0>;
+ };
};
- speaker-codecs {
- sound-dai = <&rt1015_l>,
- <&rt1015_r>;
+ displayport-dai-link {
+ link-name = "TDM";
+ dai-format = "dsp_a";
+ codec {
+ sound-dai = <&anx_bridge_dp>;
+ };
};
};
diff --git a/dts/upstream/Bindings/sound/mt8195-mt6359.yaml b/dts/upstream/Bindings/sound/mt8195-mt6359.yaml
index c1ddbf6..2af1d8f 100644
--- a/dts/upstream/Bindings/sound/mt8195-mt6359.yaml
+++ b/dts/upstream/Bindings/sound/mt8195-mt6359.yaml
@@ -12,6 +12,9 @@ maintainers:
description:
This binding describes the MT8195 sound card.
+allOf:
+ - $ref: sound-card-common.yaml#
+
properties:
compatible:
enum:
@@ -23,6 +26,33 @@ properties:
$ref: /schemas/types.yaml#/definitions/string
description: User specified audio sound card name
+ audio-routing:
+ description:
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+ Valid names could be the input or output widgets of audio components,
+ power supplies, MicBias of codec and the software switch.
+ minItems: 2
+ items:
+ enum:
+ # Sinks
+ - Ext Spk
+ - Headphone
+ - IN1P
+ - Left Spk
+ - Right Spk
+
+ # Sources
+ - Headset Mic
+ - HPOL
+ - HPOR
+ - Left BE_OUT
+ - Left SPO
+ - Right BE_OUT
+ - Right SPO
+ - Speaker
+
mediatek,platform:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of MT8195 ASoC platform.
@@ -30,10 +60,12 @@ properties:
mediatek,dptx-codec:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of MT8195 Display Port Tx codec node.
+ deprecated: true
mediatek,hdmi-codec:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of MT8195 HDMI codec node.
+ deprecated: true
mediatek,adsp:
$ref: /schemas/types.yaml#/definitions/phandle
@@ -45,20 +77,122 @@ properties:
A list of the desired dai-links in the sound card. Each entry is a
name defined in the machine driver.
+patternProperties:
+ ".*-dai-link$":
+ type: object
+ additionalProperties: false
+ description:
+ Container for dai-link level properties and CODEC sub-nodes.
+
+ properties:
+ link-name:
+ description: Indicates dai-link name and PCM stream name
+ enum:
+ - DPTX_BE
+ - ETDM1_IN_BE
+ - ETDM2_IN_BE
+ - ETDM1_OUT_BE
+ - ETDM2_OUT_BE
+ - ETDM3_OUT_BE
+ - PCM1_BE
+
+ codec:
+ description: Holds subnode which indicates codec dai.
+ type: object
+ additionalProperties: false
+ properties:
+ sound-dai:
+ minItems: 1
+ maxItems: 2
+ required:
+ - sound-dai
+
+ dai-format:
+ description: audio format
+ enum: [ i2s, right_j, left_j, dsp_a, dsp_b ]
+
+ mediatek,clk-provider:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Indicates dai-link clock master.
+ enum: [ cpu, codec ]
+
+ required:
+ - link-name
+
additionalProperties: false
required:
- compatible
- mediatek,platform
+# Disallow legacy properties if xxx-dai-link nodes are specified
+if:
+ not:
+ patternProperties:
+ ".*-dai-link$": false
+then:
+ properties:
+ mediatek,dptx-codec: false
+ mediatek,hdmi-codec: false
+
examples:
- |
sound: mt8195-sound {
compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+ model = "mt8195_r1019_5682";
mediatek,platform = <&afe>;
pinctrl-names = "default";
pinctrl-0 = <&aud_pins_default>;
+
+ audio-routing =
+ "Headphone", "HPOL",
+ "Headphone", "HPOR",
+ "IN1P", "Headset Mic",
+ "Ext Spk", "Speaker";
+
+ mm-dai-link {
+ link-name = "ETDM1_IN_BE";
+ mediatek,clk-provider = "cpu";
+ };
+
+ hs-playback-dai-link {
+ link-name = "ETDM1_OUT_BE";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&headset_codec>;
+ };
+ };
+
+ hs-capture-dai-link {
+ link-name = "ETDM2_IN_BE";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&headset_codec>;
+ };
+ };
+
+ spk-playback-dai-link {
+ link-name = "ETDM2_OUT_BE";
+ mediatek,clk-provider = "cpu";
+ codec {
+ sound-dai = <&spk_amplifier>;
+ };
+ };
+
+ hdmi-dai-link {
+ link-name = "ETDM3_OUT_BE";
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+
+ displayport-dai-link {
+ link-name = "DPTX_BE";
+ codec {
+ sound-dai = <&dp_tx>;
+ };
+ };
};
...
diff --git a/dts/upstream/Bindings/sound/nuvoton,nau8325.yaml b/dts/upstream/Bindings/sound/nuvoton,nau8325.yaml
new file mode 100644
index 0000000..979be0d
--- /dev/null
+++ b/dts/upstream/Bindings/sound/nuvoton,nau8325.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8325 audio Amplifier
+
+maintainers:
+ - Seven Lee <WTLI@nuvoton.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: nuvoton,nau8325
+
+ reg:
+ maxItems: 1
+
+ nuvoton,vref-impedance-ohms:
+ description:
+ The vref impedance to be used in ohms. Middle of voltage enables
+ Tie-Off selection options. Due to the high impedance of the VREF
+ pin, it is important to use a low-leakage capacitor.
+
+ enum: [0, 25000, 125000, 2500]
+
+ nuvoton,dac-vref-microvolt:
+ description:
+ The DAC vref to be used in voltage. DAC reference voltage setting. Can
+ be used for minor tuning of the output level. Since the VDDA is range
+ between 1.62 to 1.98 voltage, the typical value for design is 1.8V. After
+ the minor tuning, the final microvolt are as the below.
+
+ enum: [1800000, 2700000, 2880000, 3060000]
+
+ nuvoton,alc-enable:
+ description:
+ Enable digital automatic level control (ALC) function.
+ type: boolean
+
+ nuvoton,clock-detection-disable:
+ description:
+ When clock detection is enabled, it will detect whether MCLK
+ and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz.
+ FS range is from 8kHz to 96kHz. And also needs to detect the ratio
+ MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK
+ to make sure data is present. There needs to be at least 8 BCLK
+ cycles per Frame Sync.
+ type: boolean
+
+ nuvoton,clock-det-data:
+ description:
+ Request clock detection to require 2048 non-zero samples before enabling
+ the audio paths. If set then non-zero samples is required, otherwise it
+ doesn't matter.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@21 {
+ compatible = "nuvoton,nau8325";
+ reg = <0x21>;
+ nuvoton,vref-impedance-ohms = <125000>;
+ nuvoton,dac-vref-microvolt = <2880000>;
+ nuvoton,alc-enable;
+ nuvoton,clock-det-data;
+ };
+ };
diff --git a/dts/upstream/Bindings/sound/nuvoton,nau8821.yaml b/dts/upstream/Bindings/sound/nuvoton,nau8821.yaml
index 054b539..9f44168 100644
--- a/dts/upstream/Bindings/sound/nuvoton,nau8821.yaml
+++ b/dts/upstream/Bindings/sound/nuvoton,nau8821.yaml
@@ -103,6 +103,12 @@ properties:
just limited to the left adc for design demand.
type: boolean
+ nuvoton,adc-delay-ms:
+ description: Delay (in ms) to make input path stable and avoid pop noise.
+ minimum: 125
+ maximum: 500
+ default: 125
+
'#sound-dai-cells':
const: 0
@@ -136,6 +142,7 @@ examples:
nuvoton,jack-eject-debounce = <0>;
nuvoton,dmic-clk-threshold = <3072000>;
nuvoton,dmic-slew-rate = <0>;
+ nuvoton,adc-delay-ms = <125>;
#sound-dai-cells = <0>;
};
};
diff --git a/dts/upstream/Bindings/sound/nvidia,tegra20-ac97.txt b/dts/upstream/Bindings/sound/nvidia,tegra20-ac97.txt
deleted file mode 100644
index eaf0010..0000000
--- a/dts/upstream/Bindings/sound/nvidia,tegra20-ac97.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-NVIDIA Tegra 20 AC97 controller
-
-Required properties:
-- compatible : "nvidia,tegra20-ac97"
-- reg : Should contain AC97 controller registers location and length
-- interrupts : Should contain AC97 interrupt
-- resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
- - ac97
-- dmas : Must contain an entry for each entry in clock-names.
- See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
- - rx
- - tx
-- clocks : Must contain one entry, for the module clock.
- See ../clocks/clock-bindings.txt for details.
-- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
- of the GPIO used to reset the external AC97 codec
-- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
- of the GPIO corresponding with the AC97 DAP _FS line
-
-Example:
-
-ac97@70002000 {
- compatible = "nvidia,tegra20-ac97";
- reg = <0x70002000 0x200>;
- interrupts = <0 81 0x04>;
- nvidia,codec-reset-gpio = <&gpio 170 0>;
- nvidia,codec-sync-gpio = <&gpio 120 0>;
- clocks = <&tegra_car 3>;
- resets = <&tegra_car 3>;
- reset-names = "ac97";
- dmas = <&apbdma 12>, <&apbdma 12>;
- dma-names = "rx", "tx";
-};
diff --git a/dts/upstream/Bindings/sound/nvidia,tegra20-ac97.yaml b/dts/upstream/Bindings/sound/nvidia,tegra20-ac97.yaml
new file mode 100644
index 0000000..4ea0a30
--- /dev/null
+++ b/dts/upstream/Bindings/sound/nvidia,tegra20-ac97.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-ac97.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 AC97 controller
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra20-ac97
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: ac97
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ nvidia,codec-reset-gpios:
+ description: Reset pin of external AC97 codec
+ maxItems: 1
+
+ nvidia,codec-sync-gpios:
+ description: AC97 DAP _FS line
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - resets
+ - reset-names
+ - interrupts
+ - clocks
+ - dmas
+ - dma-names
+ - nvidia,codec-reset-gpios
+ - nvidia,codec-sync-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ ac97@70002000 {
+ compatible = "nvidia,tegra20-ac97";
+ reg = <0x70002000 0x200>;
+ resets = <&tegra_car 3>;
+ reset-names = "ac97";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car 3>;
+ dmas = <&apbdma 12>, <&apbdma 12>;
+ dma-names = "rx", "tx";
+ nvidia,codec-reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ nvidia,codec-sync-gpios = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+ };
+...
diff --git a/dts/upstream/Bindings/sound/nvidia,tegra20-das.txt b/dts/upstream/Bindings/sound/nvidia,tegra20-das.txt
deleted file mode 100644
index 6de3a7e..0000000
--- a/dts/upstream/Bindings/sound/nvidia,tegra20-das.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-NVIDIA Tegra 20 DAS (Digital Audio Switch) controller
-
-Required properties:
-- compatible : "nvidia,tegra20-das"
-- reg : Should contain DAS registers location and length
-
-Example:
-
-das@70000c00 {
- compatible = "nvidia,tegra20-das";
- reg = <0x70000c00 0x80>;
-};
diff --git a/dts/upstream/Bindings/sound/nvidia,tegra20-das.yaml b/dts/upstream/Bindings/sound/nvidia,tegra20-das.yaml
new file mode 100644
index 0000000..44c5ce8
--- /dev/null
+++ b/dts/upstream/Bindings/sound/nvidia,tegra20-das.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-das.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra 20 DAS (Digital Audio Switch) controller
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra20-das
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ das@70000c00 {
+ compatible = "nvidia,tegra20-das";
+ reg = <0x70000c00 0x80>;
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/sound/nvidia,tegra30-i2s.txt b/dts/upstream/Bindings/sound/nvidia,tegra30-i2s.txt
deleted file mode 100644
index 38caa93..0000000
--- a/dts/upstream/Bindings/sound/nvidia,tegra30-i2s.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-NVIDIA Tegra30 I2S controller
-
-Required properties:
-- compatible : For Tegra30, must contain "nvidia,tegra30-i2s". For Tegra124,
- must contain "nvidia,tegra124-i2s". Otherwise, must contain
- "nvidia,<chip>-i2s" plus at least one of the above, where <chip> is
- tegra114 or tegra132.
-- reg : Should contain I2S registers location and length
-- clocks : Must contain one entry, for the module clock.
- See ../clocks/clock-bindings.txt for details.
-- resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
- - i2s
-- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
- first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
-
-Example:
-
-i2s@70080300 {
- compatible = "nvidia,tegra30-i2s";
- reg = <0x70080300 0x100>;
- nvidia,ahub-cif-ids = <4 4>;
- clocks = <&tegra_car 11>;
- resets = <&tegra_car 11>;
- reset-names = "i2s";
-};
diff --git a/dts/upstream/Bindings/sound/nvidia,tegra30-i2s.yaml b/dts/upstream/Bindings/sound/nvidia,tegra30-i2s.yaml
new file mode 100644
index 0000000..89c3c64
--- /dev/null
+++ b/dts/upstream/Bindings/sound/nvidia,tegra30-i2s.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra30-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 I2S controller
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra124-i2s
+ - nvidia,tegra30-i2s
+ - items:
+ - const: nvidia,tegra114-i2s
+ - const: nvidia,tegra30-i2s
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: i2s
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: i2s
+
+ nvidia,ahub-cif-ids:
+ description: list of AHUB CIF IDs
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: rx (playback)
+ - description: tx (capture)
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - reset-names
+ - nvidia,ahub-cif-ids
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra30-car.h>
+
+ i2s@70080300 {
+ compatible = "nvidia,tegra30-i2s";
+ reg = <0x70080300 0x100>;
+ nvidia,ahub-cif-ids = <4 4>;
+ clocks = <&tegra_car TEGRA30_CLK_I2S0>;
+ resets = <&tegra_car 30>;
+ reset-names = "i2s";
+ };
+...
diff --git a/dts/upstream/Bindings/sound/qcom,sm8250.yaml b/dts/upstream/Bindings/sound/qcom,sm8250.yaml
index 2ab6871..b2e15eb 100644
--- a/dts/upstream/Bindings/sound/qcom,sm8250.yaml
+++ b/dts/upstream/Bindings/sound/qcom,sm8250.yaml
@@ -29,6 +29,8 @@ properties:
- enum:
- qcom,apq8016-sbc-sndcard
- qcom,msm8916-qdsp6-sndcard
+ - qcom,qcm6490-idp-sndcard
+ - qcom,qcs6490-rb3gen2-sndcard
- qcom,qrb5165-rb5-sndcard
- qcom,sc7180-qdsp6-sndcard
- qcom,sc8280xp-sndcard
diff --git a/dts/upstream/Bindings/sound/renesas,rsnd.yaml b/dts/upstream/Bindings/sound/renesas,rsnd.yaml
index 0d7a6b5..07ec624 100644
--- a/dts/upstream/Bindings/sound/renesas,rsnd.yaml
+++ b/dts/upstream/Bindings/sound/renesas,rsnd.yaml
@@ -48,13 +48,16 @@ properties:
- const: renesas,rcar_sound-gen3
# for Gen4 SoC
- items:
- - const: renesas,rcar_sound-r8a779g0 # R-Car V4H
+ - enum:
+ - renesas,rcar_sound-r8a779g0 # R-Car V4H
+ - renesas,rcar_sound-r8a779h0 # R-Car V4M
- const: renesas,rcar_sound-gen4
# for Generic
- enum:
- renesas,rcar_sound-gen1
- renesas,rcar_sound-gen2
- renesas,rcar_sound-gen3
+ - renesas,rcar_sound-gen4
reg:
minItems: 1
diff --git a/dts/upstream/Bindings/sound/rockchip,rk3308-codec.yaml b/dts/upstream/Bindings/sound/rockchip,rk3308-codec.yaml
new file mode 100644
index 0000000..ecf3d7d
--- /dev/null
+++ b/dts/upstream/Bindings/sound/rockchip,rk3308-codec.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,rk3308-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Internal Codec
+
+description: |
+ This is the audio codec embedded in the Rockchip RK3308
+ SoC. It has 8 24-bit ADCs and 2 24-bit DACs. The maximum supported
+ sampling rate is 192 kHz.
+
+ It is connected internally to one out of a selection of the internal I2S
+ controllers.
+
+ The RK3308 audio codec has 8 independent capture channels, but some
+ features work on stereo pairs called groups:
+ * grp 0 -- MIC1 / MIC2
+ * grp 1 -- MIC3 / MIC4
+ * grp 2 -- MIC5 / MIC6
+ * grp 3 -- MIC7 / MIC8
+
+maintainers:
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+ compatible:
+ const: rockchip,rk3308-codec
+
+ reg:
+ maxItems: 1
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the General Register Files (GRF)
+
+ clocks:
+ items:
+ - description: clock for TX
+ - description: clock for RX
+ - description: AHB clock driving the interface
+
+ clock-names:
+ items:
+ - const: mclk_tx
+ - const: mclk_rx
+ - const: hclk
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: codec
+
+ "#sound-dai-cells":
+ const: 0
+
+ rockchip,micbias-avdd-percent:
+ description: |
+ Voltage setting for the MICBIAS pins expressed as a percentage of
+ AVDD.
+
+ E.g. if rockchip,micbias-avdd-percent = 85 and AVDD = 3v3, then the
+ MIC BIAS voltage will be 3.3 V * 85% = 2.805 V.
+
+ enum: [ 50, 55, 60, 65, 70, 75, 80, 85 ]
+
+required:
+ - compatible
+ - reg
+ - rockchip,grf
+ - clocks
+ - resets
+ - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3308-cru.h>
+
+ audio_codec: audio-codec@ff560000 {
+ compatible = "rockchip,rk3308-codec";
+ reg = <0xff560000 0x10000>;
+ rockchip,grf = <&grf>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ clocks = <&cru SCLK_I2S2_8CH_TX_OUT>,
+ <&cru SCLK_I2S2_8CH_RX_OUT>,
+ <&cru PCLK_ACODEC>;
+ reset-names = "codec";
+ resets = <&cru SRST_ACODEC_P>;
+ #sound-dai-cells = <0>;
+ };
+
+...
diff --git a/dts/upstream/Bindings/sound/st,stm32-i2s.yaml b/dts/upstream/Bindings/sound/st,stm32-i2s.yaml
index b9111d3..8978f6b 100644
--- a/dts/upstream/Bindings/sound/st,stm32-i2s.yaml
+++ b/dts/upstream/Bindings/sound/st,stm32-i2s.yaml
@@ -65,6 +65,10 @@ properties:
$ref: audio-graph-port.yaml#
unevaluatedProperties: false
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- "#sound-dai-cells"
diff --git a/dts/upstream/Bindings/sound/st,stm32-sai.yaml b/dts/upstream/Bindings/sound/st,stm32-sai.yaml
index 59df8a8..68f97b4 100644
--- a/dts/upstream/Bindings/sound/st,stm32-sai.yaml
+++ b/dts/upstream/Bindings/sound/st,stm32-sai.yaml
@@ -48,6 +48,10 @@ properties:
clock-names:
maxItems: 3
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
@@ -68,7 +72,7 @@ patternProperties:
properties:
compatible:
description: Compatible for SAI sub-block A or B.
- pattern: "st,stm32-sai-sub-[ab]"
+ pattern: "^st,stm32-sai-sub-[ab]$"
"#sound-dai-cells":
const: 0
diff --git a/dts/upstream/Bindings/sound/st,stm32-spdifrx.yaml b/dts/upstream/Bindings/sound/st,stm32-spdifrx.yaml
index bc48151..3dedc81 100644
--- a/dts/upstream/Bindings/sound/st,stm32-spdifrx.yaml
+++ b/dts/upstream/Bindings/sound/st,stm32-spdifrx.yaml
@@ -50,6 +50,10 @@ properties:
resets:
maxItems: 1
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- "#sound-dai-cells"
diff --git a/dts/upstream/Bindings/sound/ti,pcm1681.txt b/dts/upstream/Bindings/sound/ti,pcm1681.txt
deleted file mode 100644
index 4df1718..0000000
--- a/dts/upstream/Bindings/sound/ti,pcm1681.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Texas Instruments PCM1681 8-channel PWM Processor
-
-Required properties:
-
- - compatible: Should contain "ti,pcm1681".
- - reg: The i2c address. Should contain <0x4c>.
-
-Examples:
-
- i2c_bus {
- pcm1681@4c {
- compatible = "ti,pcm1681";
- reg = <0x4c>;
- };
- };
diff --git a/dts/upstream/Bindings/sound/ti,pcm1681.yaml b/dts/upstream/Bindings/sound/ti,pcm1681.yaml
new file mode 100644
index 0000000..5aa0061
--- /dev/null
+++ b/dts/upstream/Bindings/sound/ti,pcm1681.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm1681.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments PCM1681 8-channel PWM Processor
+
+maintainers:
+ - Shenghao Ding <shenghao-ding@ti.com>
+ - Kevin Lu <kevin-lu@ti.com>
+ - Baojun Xu <baojun.xu@ti.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: ti,pcm1681
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcm1681: audio-codec@4c {
+ compatible = "ti,pcm1681";
+ reg = <0x4c>;
+ };
+ };
diff --git a/dts/upstream/Bindings/sound/ti,pcm6240.yaml b/dts/upstream/Bindings/sound/ti,pcm6240.yaml
new file mode 100644
index 0000000..dd5b08e
--- /dev/null
+++ b/dts/upstream/Bindings/sound/ti,pcm6240.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2024 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm6240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments PCM6240 Family Audio ADC/DAC
+
+maintainers:
+ - Shenghao Ding <shenghao-ding@ti.com>
+
+description: |
+ The PCM6240 Family is a big family of Audio ADC/DAC for
+ different Specifications, range from Personal Electric
+ to Automotive Electric, even some professional fields.
+
+ Specifications about the audio chip can be found at:
+ https://www.ti.com/lit/gpn/tlv320adc3120
+ https://www.ti.com/lit/gpn/tlv320adc5120
+ https://www.ti.com/lit/gpn/tlv320adc6120
+ https://www.ti.com/lit/gpn/dix4192
+ https://www.ti.com/lit/gpn/pcm1690
+ https://www.ti.com/lit/gpn/pcm3120-q1
+ https://www.ti.com/lit/gpn/pcm3140-q1
+ https://www.ti.com/lit/gpn/pcm5120-q1
+ https://www.ti.com/lit/gpn/pcm6120-q1
+ https://www.ti.com/lit/gpn/pcm6260-q1
+ https://www.ti.com/lit/gpn/pcm9211
+ https://www.ti.com/lit/gpn/pcmd3140
+ https://www.ti.com/lit/gpn/pcmd3180
+ https://www.ti.com/lit/gpn/taa5212
+ https://www.ti.com/lit/gpn/tad5212
+
+properties:
+ compatible:
+ description: |
+ ti,adc3120: Stereo-channel, 768-kHz, Burr-Brownâ„¢ audio analog-to-
+ digital converter (ADC) with 106-dB SNR.
+
+ ti,adc5120: 2-Channel, 768-kHz, Burr-Brownâ„¢ Audio ADC with 120-dB SNR.
+
+ ti,adc6120: Stereo-channel, 768-kHz, Burr-Brownâ„¢ audio analog-to-
+ digital converter (ADC) with 123-dB SNR.
+
+ ti,dix4192: 216-kHz digital audio converter with Quad-Channel In
+ and One-Channel Out.
+
+ ti,pcm1690: Automotive Catalog 113dB SNR 8-Channel Audio DAC with
+ Differential Outputs.
+
+ ti,pcm3120: Automotive, stereo, 106-dB SNR, 768-kHz, low-power
+ software-controlled audio ADC.
+
+ ti,pcm3140: Automotive, Quad-Channel, 768-kHz, Burr-Brownâ„¢ Audio ADC
+ with 106-dB SNR.
+
+ ti,pcm5120: Automotive, stereo, 120-dB SNR, 768-kHz, low-power
+ software-controlled audio ADC.
+
+ ti,pcm5140: Automotive, Quad-Channel, 768-kHz, Burr-Brownâ„¢ Audio ADC
+ with 120-dB SNR.
+
+ ti,pcm6120: Automotive, stereo, 123-dB SNR, 768-kHz, low-power
+ software-controlled audio ADC.
+
+ ti,pcm6140: Automotive, Quad-Channel, 768-kHz, Burr-Brownâ„¢ Audio ADC
+ with 123-dB SNR.
+
+ ti,pcm6240: Automotive 4-ch audio ADC with integrated programmable mic
+ bias, boost and input diagnostics.
+
+ ti,pcm6260: Automotive 6-ch audio ADC with integrated programmable mic
+ bias, boost and input diagnostics.
+
+ ti,pcm9211: 216-kHz digital audio converter With Stereo ADC and
+ Routing.
+
+ ti,pcmd3140: Four-channel PDM-input to TDM or I2S output converter.
+
+ ti,pcmd3180: Eight-channel pulse-density-modulation input to TDM or
+ I2S output converter.
+
+ ti,taa5212: Low-power high-performance stereo audio ADC with 118-dB
+ dynamic range.
+
+ ti,tad5212: Low-power stereo audio DAC with 120-dB dynamic range.
+ oneOf:
+ - items:
+ - enum:
+ - ti,adc3120
+ - ti,adc5120
+ - ti,pcm3120
+ - ti,pcm5120
+ - ti,pcm6120
+ - const: ti,adc6120
+ - items:
+ - enum:
+ - ti,pcmd512x
+ - ti,pcm9211
+ - ti,taa5212
+ - ti,tad5212
+ - const: ti,adc6120
+ - items:
+ - enum:
+ - ti,pcm3140
+ - ti,pcm5140
+ - ti,dix4192
+ - ti,pcm6140
+ - ti,pcm6260
+ - const: ti,pcm6240
+ - items:
+ - enum:
+ - ti,pcmd3140
+ - ti,pcmd3180
+ - ti,pcm1690
+ - ti,taa5412
+ - ti,tad5412
+ - const: ti,pcm6240
+ - enum:
+ - ti,adc6120
+ - ti,pcm6240
+
+ reg:
+ description:
+ I2C address, in multiple pcmdevices case, all the i2c address
+ aggregate as one Audio Device to support multiple audio slots.
+ minItems: 1
+ maxItems: 4
+
+ reset-gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description:
+ Invalid only for ti,pcm1690 because of no INT pin.
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,pcm1690
+ then:
+ properties:
+ interrupts: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ /* example for two devices with interrupt support */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pcm6240: audio-codec@48 {
+ compatible = "ti,pcm6240";
+ reg = <0x48>, /* primary-device */
+ <0x4b>; /* secondary-device */
+ #sound-dai-cells = <0>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15>;
+ };
+ };
+...
diff --git a/dts/upstream/Bindings/sound/wlf,wm8776.yaml b/dts/upstream/Bindings/sound/wlf,wm8776.yaml
new file mode 100644
index 0000000..7bbc96e
--- /dev/null
+++ b/dts/upstream/Bindings/sound/wlf,wm8776.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8776.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8776 audio CODEC
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: wlf,wm8776
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@1a {
+ compatible = "wlf,wm8776";
+ reg = <0x1a>;
+ };
+ };
diff --git a/dts/upstream/Bindings/sound/wlf,wm8974.txt b/dts/upstream/Bindings/sound/wlf,wm8974.txt
deleted file mode 100644
index 01d3a7c..0000000
--- a/dts/upstream/Bindings/sound/wlf,wm8974.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-WM8974 audio CODEC
-
-This device supports both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
- - compatible: "wlf,wm8974"
- - reg: the I2C address or SPI chip select number of the device
-
-Examples:
-
-codec: wm8974@1a {
- compatible = "wlf,wm8974";
- reg = <0x1a>;
-};
diff --git a/dts/upstream/Bindings/sound/wlf,wm8974.yaml b/dts/upstream/Bindings/sound/wlf,wm8974.yaml
new file mode 100644
index 0000000..d273002
--- /dev/null
+++ b/dts/upstream/Bindings/sound/wlf,wm8974.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8974 audio CODEC
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: wlf,wm8974
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@1a {
+ compatible = "wlf,wm8974";
+ reg = <0x1a>;
+ };
+ };
diff --git a/dts/upstream/Bindings/sound/wm8776.txt b/dts/upstream/Bindings/sound/wm8776.txt
deleted file mode 100644
index 0117336..0000000
--- a/dts/upstream/Bindings/sound/wm8776.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-WM8776 audio CODEC
-
-This device supports both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
-
- - compatible : "wlf,wm8776"
-
- - reg : the I2C address of the device for I2C, the chip select
- number for SPI.
-
-Example:
-
-wm8776: codec@1a {
- compatible = "wlf,wm8776";
- reg = <0x1a>;
-};
diff --git a/dts/upstream/Bindings/sound/xmos,xvf3500.yaml b/dts/upstream/Bindings/sound/xmos,xvf3500.yaml
new file mode 100644
index 0000000..fb77a61
--- /dev/null
+++ b/dts/upstream/Bindings/sound/xmos,xvf3500.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/xmos,xvf3500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: XMOS XVF3500 VocalFusion Voice Processor
+
+maintainers:
+ - Javier Carrasco <javier.carrasco@wolfvision.net>
+
+description:
+ The XMOS XVF3500 VocalFusion Voice Processor is a low-latency, 32-bit
+ multicore controller for voice processing.
+ https://www.xmos.com/xvf3500/
+
+allOf:
+ - $ref: /schemas/usb/usb-device.yaml#
+
+properties:
+ compatible:
+ const: usb20b1,0013
+
+ reg: true
+
+ reset-gpios:
+ maxItems: 1
+
+ vdd-supply:
+ description:
+ Regulator for the 1V0 supply.
+
+ vddio-supply:
+ description:
+ Regulator for the 3V3 supply.
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vdd-supply
+ - vddio-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voice_processor: voice-processor@1 {
+ compatible = "usb20b1,0013";
+ reg = <1>;
+ reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc1v0>;
+ vddio-supply = <&vcc3v3>;
+ };
+ };
+
+...
diff --git a/dts/upstream/Bindings/spi/airoha,en7581-snand.yaml b/dts/upstream/Bindings/spi/airoha,en7581-snand.yaml
new file mode 100644
index 0000000..b820c56
--- /dev/null
+++ b/dts/upstream/Bindings/spi/airoha,en7581-snand.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/airoha,en7581-snand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash controller for Airoha ARM SoCs
+
+maintainers:
+ - Lorenzo Bianconi <lorenzo@kernel.org>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: airoha,en7581-snand
+
+ reg:
+ items:
+ - description: spi base address
+ - description: nfi2spi base address
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: spi
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/en7523-clk.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spi@1fa10000 {
+ compatible = "airoha,en7581-snand";
+ reg = <0x0 0x1fa10000 0x0 0x140>,
+ <0x0 0x1fa11000 0x0 0x160>;
+
+ clocks = <&scuclk EN7523_CLK_SPI>;
+ clock-names = "spi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <2>;
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/spi/cdns,qspi-nor.yaml b/dts/upstream/Bindings/spi/cdns,qspi-nor.yaml
index cca81f8..d48ecd6 100644
--- a/dts/upstream/Bindings/spi/cdns,qspi-nor.yaml
+++ b/dts/upstream/Bindings/spi/cdns,qspi-nor.yaml
@@ -68,12 +68,13 @@ properties:
- items:
- enum:
- amd,pensando-elba-qspi
- - ti,k2g-qspi
- - ti,am654-ospi
- intel,lgm-qspi
- - xlnx,versal-ospi-1.0
- intel,socfpga-qspi
+ - mobileye,eyeq5-ospi
- starfive,jh7110-qspi
+ - ti,am654-ospi
+ - ti,k2g-qspi
+ - xlnx,versal-ospi-1.0
- const: cdns,qspi-nor
- const: cdns,qspi-nor
@@ -145,7 +146,6 @@ required:
- reg
- interrupts
- clocks
- - cdns,fifo-depth
- cdns,fifo-width
- cdns,trigger-address
- '#address-cells'
diff --git a/dts/upstream/Bindings/spi/marvell,armada-3700-spi.yaml b/dts/upstream/Bindings/spi/marvell,armada-3700-spi.yaml
new file mode 100644
index 0000000..61caa1d
--- /dev/null
+++ b/dts/upstream/Bindings/spi/marvell,armada-3700-spi.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/marvell,armada-3700-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 3700 SPI Controller
+
+description:
+ The SPI controller on Marvell Armada 3700 SoC.
+
+maintainers:
+ - Kousik Sanagavarapu <five231003@gmail.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: marvell,armada-3700-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ num-cs:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ spi0: spi@10600 {
+ compatible = "marvell,armada-3700-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10600 0x5d>;
+ clocks = <&nb_perih_clk 7>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ num-cs = <4>;
+ };
+...
diff --git a/dts/upstream/Bindings/spi/renesas,sh-msiof.yaml b/dts/upstream/Bindings/spi/renesas,sh-msiof.yaml
index 00acbbb..49649fc 100644
--- a/dts/upstream/Bindings/spi/renesas,sh-msiof.yaml
+++ b/dts/upstream/Bindings/spi/renesas,sh-msiof.yaml
@@ -54,6 +54,7 @@ properties:
- renesas,msiof-r8a779a0 # R-Car V3U
- renesas,msiof-r8a779f0 # R-Car S4-8
- renesas,msiof-r8a779g0 # R-Car V4H
+ - renesas,msiof-r8a779h0 # R-Car V4M
- const: renesas,rcar-gen4-msiof # generic R-Car Gen4
# compatible device
- items:
diff --git a/dts/upstream/Bindings/spi/spi-armada-3700.txt b/dts/upstream/Bindings/spi/spi-armada-3700.txt
deleted file mode 100644
index 1564aa8..0000000
--- a/dts/upstream/Bindings/spi/spi-armada-3700.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Marvell Armada 3700 SPI Controller
-
-Required Properties:
-
-- compatible: should be "marvell,armada-3700-spi"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: The interrupt number. The interrupt specifier format depends on
- the interrupt controller and of its driver.
-- clocks: Must contain the clock source, usually from the North Bridge clocks.
-- num-cs: The number of chip selects that is supported by this SPI Controller
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Example:
-
- spi0: spi@10600 {
- compatible = "marvell,armada-3700-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x10600 0x5d>;
- clocks = <&nb_perih_clk 7>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- num-cs = <4>;
- };
diff --git a/dts/upstream/Bindings/spi/st,stm32-qspi.yaml b/dts/upstream/Bindings/spi/st,stm32-qspi.yaml
index 8bba965..3f1a27e 100644
--- a/dts/upstream/Bindings/spi/st,stm32-qspi.yaml
+++ b/dts/upstream/Bindings/spi/st,stm32-qspi.yaml
@@ -46,6 +46,10 @@ properties:
- const: tx
- const: rx
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/spi/st,stm32-spi.yaml b/dts/upstream/Bindings/spi/st,stm32-spi.yaml
index 4bd9aeb..a55c863 100644
--- a/dts/upstream/Bindings/spi/st,stm32-spi.yaml
+++ b/dts/upstream/Bindings/spi/st,stm32-spi.yaml
@@ -52,6 +52,10 @@ properties:
- const: rx
- const: tx
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
- reg
diff --git a/dts/upstream/Bindings/spi/ti,qspi.yaml b/dts/upstream/Bindings/spi/ti,qspi.yaml
new file mode 100644
index 0000000..626a915
--- /dev/null
+++ b/dts/upstream/Bindings/spi/ti,qspi.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ti,qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI QSPI controller
+
+maintainers:
+ - Kousik Sanagavarapu <five231003@gmail.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am4372-qspi
+ - ti,dra7xxx-qspi
+
+ reg:
+ items:
+ - description: base registers
+ - description: mapped memory
+
+ reg-names:
+ items:
+ - const: qspi_base
+ - const: qspi_mmap
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: fck
+
+ interrupts:
+ maxItems: 1
+
+ num-cs:
+ minimum: 1
+ maximum: 4
+ default: 1
+
+ ti,hwmods:
+ description:
+ Name of the hwmod associated to the QSPI. This is for legacy
+ platforms only.
+ $ref: /schemas/types.yaml#/definitions/string
+ deprecated: true
+
+ syscon-chipselects:
+ description:
+ Handle to system control region containing QSPI chipselect register
+ and offset of that register.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to system control register
+ - description: register offset
+
+ spi-max-frequency:
+ description: Maximum SPI clocking speed of the controller in Hz.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/dra7.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ spi@4b300000 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+ clock-names = "fck";
+ num-cs = <4>;
+ spi-max-frequency = <48000000>;
+ interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+ };
+...
diff --git a/dts/upstream/Bindings/spi/ti_qspi.txt b/dts/upstream/Bindings/spi/ti_qspi.txt
deleted file mode 100644
index 47b184b..0000000
--- a/dts/upstream/Bindings/spi/ti_qspi.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-TI QSPI controller.
-
-Required properties:
-- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
-- reg: Should contain QSPI registers location and length.
-- reg-names: Should contain the resource reg names.
- - qspi_base: Qspi configuration register Address space
- - qspi_mmap: Memory mapped Address space
- - (optional) qspi_ctrlmod: Control module Address space
-- interrupts: should contain the qspi interrupt number.
-- #address-cells, #size-cells : Must be present if the device has sub-nodes
-- ti,hwmods: Name of the hwmod associated to the QSPI
-
-Recommended properties:
-- spi-max-frequency: Definition as per
- Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
-- syscon-chipselects: Handle to system control region contains QSPI
- chipselect register and offset of that register.
-
-NOTE: TI QSPI controller requires different pinmux and IODelay
-parameters for Mode-0 and Mode-3 operations, which needs to be set up by
-the bootloader (U-Boot). Default configuration only supports Mode-0
-operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be
-specified in the slave nodes of TI QSPI controller without appropriate
-modification to bootloader.
-
-Example:
-
-For am4372:
-qspi: qspi@47900000 {
- compatible = "ti,am4372-qspi";
- reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
- reg-names = "qspi_base", "qspi_mmap";
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <25000000>;
- ti,hwmods = "qspi";
-};
-
-For dra7xx:
-qspi: qspi@4b300000 {
- compatible = "ti,dra7xxx-qspi";
- reg = <0x4b300000 0x100>,
- <0x5c000000 0x4000000>,
- reg-names = "qspi_base", "qspi_mmap";
- syscon-chipselects = <&scm_conf 0x558>;
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <48000000>;
- ti,hwmods = "qspi";
-};
diff --git a/dts/upstream/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/dts/upstream/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml
index f882903..3ccf35d 100644
--- a/dts/upstream/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml
+++ b/dts/upstream/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -14,7 +14,7 @@ description: |
It is a MIPI System Power Management (SPMI) controller.
The PMIC part is provided by
- ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
allOf:
- $ref: spmi.yaml#
@@ -48,26 +48,23 @@ patternProperties:
PMIC properties, which are specific to the used SPMI PMIC device(s).
When used in combination with HiSilicon 6421v600, the properties
are documented at
- drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
unevaluatedProperties: false
examples:
- |
- bus {
- #address-cells = <2>;
- #size-cells = <2>;
+ #include <dt-bindings/spmi/spmi.h>
- spmi: spmi@fff24000 {
+ spmi@fff24000 {
compatible = "hisilicon,kirin970-spmi-controller";
+ reg = <0xfff24000 0x1000>;
#address-cells = <2>;
#size-cells = <0>;
- reg = <0x0 0xfff24000 0x0 0x1000>;
hisilicon,spmi-channel = <2>;
pmic@0 {
- reg = <0 0>;
- /* pmic properties */
+ reg = <0 SPMI_USID>;
+ /* pmic properties */
};
- };
};
diff --git a/dts/upstream/Bindings/spmi/qcom,spmi-pmic-arb.yaml b/dts/upstream/Bindings/spmi/qcom,spmi-pmic-arb.yaml
index f983b4a..51daf1b 100644
--- a/dts/upstream/Bindings/spmi/qcom,spmi-pmic-arb.yaml
+++ b/dts/upstream/Bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -92,6 +92,7 @@ properties:
description: >
SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond.
Supported values, 0 = primary bus, 1 = secondary bus
+ deprecated: true
required:
- compatible
diff --git a/dts/upstream/Bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml b/dts/upstream/Bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml
new file mode 100644
index 0000000..a28b70f
--- /dev/null
+++ b/dts/upstream/Bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,x1e80100-spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 SPMI Controller (PMIC Arbiter v7)
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+ The X1E80100 SPMI PMIC Arbiter implements HW version 7 and it's an SPMI
+ controller with wrapping arbitration logic to allow for multiple on-chip
+ devices to control up to 2 SPMI separate buses.
+
+ The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+ to slave devices.
+
+properties:
+ compatible:
+ const: qcom,x1e80100-spmi-pmic-arb
+
+ reg:
+ items:
+ - description: core registers
+ - description: tx-channel per virtual slave registers
+ - description: rx-channel (called observer) per virtual slave registers
+
+ reg-names:
+ items:
+ - const: core
+ - const: chnls
+ - const: obsrvr
+
+ ranges: true
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 2
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ indicates the active Execution Environment identifier
+
+ qcom,channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ which of the PMIC Arb provided channels to use for accesses
+
+patternProperties:
+ "^spmi@[a-f0-9]+$":
+ type: object
+ $ref: /schemas/spmi/spmi.yaml
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ items:
+ - description: configuration registers
+ - description: interrupt controller registers
+
+ reg-names:
+ items:
+ - const: cnfg
+ - const: intr
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: periph_irq
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 4
+ description: |
+ cell 1: slave ID for the requested interrupt (0-15)
+ cell 2: peripheral ID for requested interrupt (0-255)
+ cell 3: the requested peripheral interrupt (0-7)
+ cell 4: interrupt flags indicating level-sense information,
+ as defined in dt-bindings/interrupt-controller/irq.h
+
+required:
+ - compatible
+ - reg-names
+ - qcom,ee
+ - qcom,channel
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spmi: arbiter@c400000 {
+ compatible = "qcom,x1e80100-spmi-pmic-arb";
+ reg = <0 0x0c400000 0 0x3000>,
+ <0 0x0c500000 0 0x4000000>,
+ <0 0x0c440000 0 0x80000>;
+ reg-names = "core", "chnls", "obsrvr";
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ spmi_bus0: spmi@c42d000 {
+ reg = <0 0x0c42d000 0 0x4000>,
+ <0 0x0c4c0000 0 0x10000>;
+ reg-names = "cnfg", "intr";
+
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/thermal/amlogic,thermal.yaml b/dts/upstream/Bindings/thermal/amlogic,thermal.yaml
index 20f8f9b..01fccdf 100644
--- a/dts/upstream/Bindings/thermal/amlogic,thermal.yaml
+++ b/dts/upstream/Bindings/thermal/amlogic,thermal.yaml
@@ -13,11 +13,13 @@ description: Binding for Amlogic Thermal
properties:
compatible:
- items:
- - enum:
- - amlogic,g12a-cpu-thermal
- - amlogic,g12a-ddr-thermal
- - const: amlogic,g12a-thermal
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,g12a-cpu-thermal
+ - amlogic,g12a-ddr-thermal
+ - const: amlogic,g12a-thermal
+ - const: amlogic,a1-cpu-thermal
reg:
maxItems: 1
diff --git a/dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml b/dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml
index b634f57..ca81c8a 100644
--- a/dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml
@@ -18,13 +18,15 @@ properties:
oneOf:
- enum:
- loongson,ls2k1000-thermal
+ - loongson,ls2k2000-thermal
- items:
- enum:
- - loongson,ls2k2000-thermal
+ - loongson,ls2k0500-thermal
- const: loongson,ls2k1000-thermal
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
interrupts:
maxItems: 1
@@ -38,6 +40,24 @@ required:
- interrupts
- '#thermal-sensor-cells'
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - loongson,ls2k2000-thermal
+
+then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+
+else:
+ properties:
+ reg:
+ maxItems: 1
+
unevaluatedProperties: false
examples:
diff --git a/dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml b/dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml
index e6665af..331cf4e 100644
--- a/dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml
@@ -19,6 +19,9 @@ properties:
compatible:
enum:
- mediatek,mt7988-lvts-ap
+ - mediatek,mt8186-lvts
+ - mediatek,mt8188-lvts-ap
+ - mediatek,mt8188-lvts-mcu
- mediatek,mt8192-lvts-ap
- mediatek,mt8192-lvts-mcu
- mediatek,mt8195-lvts-ap
@@ -60,6 +63,8 @@ allOf:
compatible:
contains:
enum:
+ - mediatek,mt8188-lvts-ap
+ - mediatek,mt8188-lvts-mcu
- mediatek,mt8192-lvts-ap
- mediatek,mt8192-lvts-mcu
then:
@@ -75,6 +80,7 @@ allOf:
compatible:
contains:
enum:
+ - mediatek,mt8186-lvts
- mediatek,mt8195-lvts-ap
- mediatek,mt8195-lvts-mcu
then:
diff --git a/dts/upstream/Bindings/thermal/qcom-lmh.yaml b/dts/upstream/Bindings/thermal/qcom-lmh.yaml
index 5ff72ce..1175bb3 100644
--- a/dts/upstream/Bindings/thermal/qcom-lmh.yaml
+++ b/dts/upstream/Bindings/thermal/qcom-lmh.yaml
@@ -17,10 +17,14 @@ description:
properties:
compatible:
- enum:
- - qcom,sc8180x-lmh
- - qcom,sdm845-lmh
- - qcom,sm8150-lmh
+ oneOf:
+ - enum:
+ - qcom,sc8180x-lmh
+ - qcom,sdm845-lmh
+ - qcom,sm8150-lmh
+ - items:
+ - const: qcom,qcm2290-lmh
+ - const: qcom,sm8150-lmh
reg:
items:
diff --git a/dts/upstream/Bindings/thermal/st,stih407-thermal.yaml b/dts/upstream/Bindings/thermal/st,stih407-thermal.yaml
new file mode 100644
index 0000000..9f6fc5c
--- /dev/null
+++ b/dts/upstream/Bindings/thermal/st,stih407-thermal.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi digital thermal sensor (DTS)
+
+maintainers:
+ - Patrice Chotard <patrice.chotard@foss.st.com>
+ - Lee Jones <lee@kernel.org>
+
+allOf:
+ - $ref: thermal-sensor.yaml
+
+properties:
+ compatible:
+ const: st,stih407-thermal
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: thermal
+
+ interrupts:
+ description:
+ For thermal sensors for which no interrupt has been defined, a polling
+ delay of 1000ms will be used to read the temperature from device.
+ maxItems: 1
+
+ '#thermal-sensor-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ temperature-sensor@91a0000 {
+ compatible = "st,stih407-thermal";
+ reg = <0x91a0000 0x28>;
+ clock-names = "thermal";
+ clocks = <&CLK_SYSIN>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+...
diff --git a/dts/upstream/Bindings/thermal/st-thermal.txt b/dts/upstream/Bindings/thermal/st-thermal.txt
deleted file mode 100644
index a2f9391..0000000
--- a/dts/upstream/Bindings/thermal/st-thermal.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
-
-Required parameters:
--------------------
-
-compatible : Should be "st,stih407-thermal"
-
-clock-names : Should be "thermal".
- See: Documentation/devicetree/bindings/resource-names.txt
-clocks : Phandle of the clock used by the thermal sensor.
- See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional parameters:
--------------------
-
-reg : For non-sysconf based sensors, this should be the physical base
- address and length of the sensor's registers.
-interrupts : Standard way to define interrupt number.
- NB: For thermal sensor's for which no interrupt has been
- defined, a polling delay of 1000ms will be used to read the
- temperature from device.
-
-Example:
-
- temp0@91a0000 {
- compatible = "st,stih407-thermal";
- reg = <0x91a0000 0x28>;
- clock-names = "thermal";
- clocks = <&CLK_SYSIN>;
- interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
- st,passive_cooling_temp = <110>;
- };
diff --git a/dts/upstream/Bindings/timer/renesas,cmt.yaml b/dts/upstream/Bindings/timer/renesas,cmt.yaml
index a0be175..5e09c04 100644
--- a/dts/upstream/Bindings/timer/renesas,cmt.yaml
+++ b/dts/upstream/Bindings/timer/renesas,cmt.yaml
@@ -103,6 +103,7 @@ properties:
- renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U
- renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8
- renesas,r8a779g0-cmt0 # 32-bit CMT0 on R-Car V4H
+ - renesas,r8a779h0-cmt0 # 32-bit CMT0 on R-Car V4M
- const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
- items:
@@ -110,6 +111,7 @@ properties:
- renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U
- renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8
- renesas,r8a779g0-cmt1 # 48-bit CMT on R-Car V4H
+ - renesas,r8a779h0-cmt1 # 48-bit CMT on R-Car V4M
- const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
reg:
diff --git a/dts/upstream/Bindings/timer/renesas,ostm.yaml b/dts/upstream/Bindings/timer/renesas,ostm.yaml
index 8b06a68..e8c6421 100644
--- a/dts/upstream/Bindings/timer/renesas,ostm.yaml
+++ b/dts/upstream/Bindings/timer/renesas,ostm.yaml
@@ -26,6 +26,7 @@ properties:
- renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five
- renesas,r9a07g044-ostm # RZ/G2{L,LC}
- renesas,r9a07g054-ostm # RZ/V2L
+ - renesas,r9a09g057-ostm # RZ/V2H(P)
- const: renesas,ostm # Generic
reg:
@@ -58,6 +59,7 @@ if:
- renesas,r9a07g043-ostm
- renesas,r9a07g044-ostm
- renesas,r9a07g054-ostm
+ - renesas,r9a09g057-ostm
then:
required:
- resets
diff --git a/dts/upstream/Bindings/timer/renesas,tmu.yaml b/dts/upstream/Bindings/timer/renesas,tmu.yaml
index 84bbe15..360a5cf 100644
--- a/dts/upstream/Bindings/timer/renesas,tmu.yaml
+++ b/dts/upstream/Bindings/timer/renesas,tmu.yaml
@@ -39,6 +39,7 @@ properties:
- renesas,tmu-r8a779a0 # R-Car V3U
- renesas,tmu-r8a779f0 # R-Car S4-8
- renesas,tmu-r8a779g0 # R-Car V4H
+ - renesas,tmu-r8a779h0 # R-Car V4M
- const: renesas,tmu
reg:
diff --git a/dts/upstream/Bindings/tpm/ibm,vtpm.yaml b/dts/upstream/Bindings/tpm/ibm,vtpm.yaml
index 50a3fd3..8b0d3d4 100644
--- a/dts/upstream/Bindings/tpm/ibm,vtpm.yaml
+++ b/dts/upstream/Bindings/tpm/ibm,vtpm.yaml
@@ -33,13 +33,13 @@ properties:
reg:
maxItems: 1
- 'ibm,#dma-address-cells':
+ ibm,#dma-address-cells:
description:
number of cells that are used to encode the physical address field of
dma-window properties
$ref: /schemas/types.yaml#/definitions/uint32-array
- 'ibm,#dma-size-cells':
+ ibm,#dma-size-cells:
description:
number of cells that are used to encode the size field of
dma-window properties
diff --git a/dts/upstream/Bindings/tpm/tcg,tpm-tis-i2c.yaml b/dts/upstream/Bindings/tpm/tcg,tpm-tis-i2c.yaml
index 3ab4434..af7720d 100644
--- a/dts/upstream/Bindings/tpm/tcg,tpm-tis-i2c.yaml
+++ b/dts/upstream/Bindings/tpm/tcg,tpm-tis-i2c.yaml
@@ -32,6 +32,7 @@ properties:
- enum:
- infineon,slb9673
- nuvoton,npct75x
+ - st,st33ktpm2xi2c
- const: tcg,tpm-tis-i2c
- description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface
diff --git a/dts/upstream/Bindings/trivial-devices.yaml b/dts/upstream/Bindings/trivial-devices.yaml
index e07be7b..0a41945 100644
--- a/dts/upstream/Bindings/trivial-devices.yaml
+++ b/dts/upstream/Bindings/trivial-devices.yaml
@@ -126,6 +126,8 @@ properties:
- ibm,cffps1
# IBM Common Form Factor Power Supply Versions 2
- ibm,cffps2
+ # IBM On-Chip Controller hwmon device
+ - ibm,p8-occ-hwmon
# Infineon barometric pressure and temperature sensor
- infineon,dps310
# Infineon IR36021 digital POL buck controller
@@ -134,6 +136,8 @@ properties:
- infineon,irps5401
# Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
- infineon,tlv493d-a1b6
+ # Infineon Hot-swap controller xdp710
+ - infineon,xdp710
# Infineon Multi-phase Digital VR Controller xdpe11280
- infineon,xdpe11280
# Infineon Multi-phase Digital VR Controller xdpe12254
@@ -160,6 +164,8 @@ properties:
- isil,isl29030
# Intersil ISL68137 Digital Output Configurable PWM Controller
- isil,isl68137
+ # Intersil ISL69269 PMBus Voltage Regulator
+ - isil,isl69269
# Intersil ISL76682 Ambient Light Sensor
- isil,isl76682
# Linear Technology LTC2488
diff --git a/dts/upstream/Bindings/ufs/samsung,exynos-ufs.yaml b/dts/upstream/Bindings/ufs/samsung,exynos-ufs.yaml
index b2b509b..7208798 100644
--- a/dts/upstream/Bindings/ufs/samsung,exynos-ufs.yaml
+++ b/dts/upstream/Bindings/ufs/samsung,exynos-ufs.yaml
@@ -12,12 +12,10 @@ maintainers:
description: |
Each Samsung UFS host controller instance should have its own node.
-allOf:
- - $ref: ufs-common.yaml
-
properties:
compatible:
enum:
+ - google,gs101-ufs
- samsung,exynos7-ufs
- samsung,exynosautov9-ufs
- samsung,exynosautov9-ufs-vh
@@ -38,14 +36,24 @@ properties:
- const: ufsp
clocks:
+ minItems: 2
items:
- description: ufs link core clock
- description: unipro main clock
+ - description: fmp clock
+ - description: ufs aclk clock
+ - description: ufs pclk clock
+ - description: sysreg clock
clock-names:
+ minItems: 2
items:
- const: core_clk
- const: sclk_unipro_main
+ - const: fmp
+ - const: aclk
+ - const: pclk
+ - const: sysreg
phys:
maxItems: 1
@@ -72,6 +80,30 @@ required:
- clocks
- clock-names
+allOf:
+ - $ref: ufs-common.yaml
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: google,gs101-ufs
+
+ then:
+ properties:
+ clocks:
+ minItems: 6
+
+ clock-names:
+ minItems: 6
+
+ else:
+ properties:
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
unevaluatedProperties: false
examples:
diff --git a/dts/upstream/Bindings/usb/chipidea,usb2-common.yaml b/dts/upstream/Bindings/usb/chipidea,usb2-common.yaml
new file mode 100644
index 0000000..d2a7d2e
--- /dev/null
+++ b/dts/upstream/Bindings/usb/chipidea,usb2-common.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/chipidea,usb2-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB2 ChipIdea USB controller Common Properties
+
+maintainers:
+ - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+ dr_mode: true
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ maxItems: 1
+
+ "#reset-cells":
+ const: 1
+
+ phy_type: true
+
+ itc-setting:
+ description:
+ interrupt threshold control register control, the setting should be
+ aligned with ITC bits at register USBCMD.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ahb-burst-config:
+ description:
+ it is vendor dependent, the required value should be aligned with
+ AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is
+ used to change AHB burst configuration, check the chipidea spec for
+ meaning of each value. If this property is not existed, it will use
+ the reset value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x0
+ maximum: 0x7
+
+ tx-burst-size-dword:
+ description:
+ it is vendor dependent, the tx burst size in dword (4 bytes), This
+ register represents the maximum length of a the burst in 32-bit
+ words while moving data from system memory to the USB bus, the value
+ of this property will only take effect if property "ahb-burst-config"
+ is set to 0, if this property is missing the reset default of the
+ hardware implementation will be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x0
+ maximum: 0x20
+
+ rx-burst-size-dword:
+ description:
+ it is vendor dependent, the rx burst size in dword (4 bytes), This
+ register represents the maximum length of a the burst in 32-bit words
+ while moving data from the USB bus to system memory, the value of
+ this property will only take effect if property "ahb-burst-config"
+ is set to 0, if this property is missing the reset default of the
+ hardware implementation will be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x0
+ maximum: 0x20
+
+ extcon:
+ description:
+ Phandles to external connector devices. First phandle should point
+ to external connector, which provide "USB" cable events, the second
+ should point to external connector device, which provide "USB-HOST"
+ cable events. If one of the external connector devices is not
+ required, empty <0> phandle should be specified.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ items:
+ - description: vbus extcon
+ - description: id extcon
+
+ phy-clkgate-delay-us:
+ description:
+ The delay time (us) between putting the PHY into low power mode and
+ gating the PHY clock.
+
+ non-zero-ttctrl-ttha:
+ description:
+ After setting this property, the value of register ttctrl.ttha
+ will be 0x7f; if not, the value will be 0x0, this is the default
+ value. It needs to be very carefully for setting this property, it
+ is recommended that consult with your IC engineer before setting
+ this value. On the most of chipidea platforms, the "usage_tt" flag
+ at RTL is 0, so this property only affects siTD.
+
+ If this property is not set, the max packet size is 1023 bytes, and
+ if the total of packet size for previous transactions are more than
+ 256 bytes, it can't accept any transactions within this frame. The
+ use case is single transaction, but higher frame rate.
+
+ If this property is set, the max packet size is 188 bytes, it can
+ handle more transactions than above case, it can accept transactions
+ until it considers the left room size within frame is less than 188
+ bytes, software needs to make sure it does not send more than 90%
+ maximum_periodic_data_per_frame. The use case is multiple
+ transactions, but less frame rate.
+ type: boolean
+
+ mux-controls:
+ description:
+ The mux control for toggling host/device output of this controller.
+ It's expected that a mux state of 0 indicates device mode and a mux
+ state of 1 indicates host mode.
+ maxItems: 1
+
+ mux-control-names:
+ const: usb_switch
+
+ pinctrl-names:
+ description:
+ Names for optional pin modes in "default", "host", "device".
+ In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
+ In this case, the "idle" state needs to pull down the data and
+ strobe pin and the "active" state needs to pull up the strobe pin.
+ oneOf:
+ - items:
+ - const: idle
+ - const: active
+ - items:
+ - const: default
+ - const: host
+ - const: device
+ - items:
+ - const: default
+ - enum:
+ - host
+ - device
+ - items:
+ - const: default
+
+ pinctrl-0:
+ maxItems: 1
+
+ pinctrl-1:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: usb-phy
+
+ vbus-supply:
+ description: reference to the VBUS regulator.
+
+ usb-phy:
+ description: phandle for the PHY device. Use "phys" instead.
+ maxItems: 1
+ deprecated: true
+
+ port:
+ description:
+ Any connector to the data bus of this controller should be modelled
+ using the OF graph bindings specified, if the "usb-role-switch"
+ property is used.
+ $ref: /schemas/graph.yaml#/properties/port
+
+ reset-gpios:
+ maxItems: 1
+
+dependencies:
+ port: [ usb-role-switch ]
+ mux-controls: [ mux-control-names ]
+
+required:
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: usb-hcd.yaml#
+ - $ref: usb-drd.yaml#
+
+additionalProperties: true
diff --git a/dts/upstream/Bindings/usb/chipidea,usb2-imx.yaml b/dts/upstream/Bindings/usb/chipidea,usb2-imx.yaml
new file mode 100644
index 0000000..8f6136f
--- /dev/null
+++ b/dts/upstream/Bindings/usb/chipidea,usb2-imx.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/chipidea,usb2-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP USB2 ChipIdea USB controller
+
+maintainers:
+ - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx27-usb
+ - items:
+ - enum:
+ - fsl,imx23-usb
+ - fsl,imx25-usb
+ - fsl,imx28-usb
+ - fsl,imx35-usb
+ - fsl,imx50-usb
+ - fsl,imx51-usb
+ - fsl,imx53-usb
+ - fsl,imx6q-usb
+ - fsl,imx6sl-usb
+ - fsl,imx6sx-usb
+ - fsl,imx6ul-usb
+ - fsl,imx7d-usb
+ - fsl,vf610-usb
+ - const: fsl,imx27-usb
+ - items:
+ - enum:
+ - fsl,imx8dxl-usb
+ - fsl,imx8ulp-usb
+ - const: fsl,imx7ulp-usb
+ - const: fsl,imx6ul-usb
+ - items:
+ - enum:
+ - fsl,imx8mm-usb
+ - fsl,imx8mn-usb
+ - fsl,imx93-usb
+ - const: fsl,imx7d-usb
+ - const: fsl,imx27-usb
+ - items:
+ - enum:
+ - fsl,imx6sll-usb
+ - fsl,imx7ulp-usb
+ - const: fsl,imx6ul-usb
+ - const: fsl,imx27-usb
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+ fsl,usbmisc:
+ description:
+ Phandler of non-core register device, with one argument that
+ indicate usb controller index
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to usbmisc node
+ - description: index of usb controller
+
+ disable-over-current:
+ type: boolean
+ description: disable over current detect
+
+ over-current-active-low:
+ type: boolean
+ description: over current signal polarity is active low
+
+ over-current-active-high:
+ type: boolean
+ description:
+ Over current signal polarity is active high. It's recommended to
+ specify the over current polarity.
+
+ power-active-high:
+ type: boolean
+ description: power signal polarity is active high
+
+ external-vbus-divider:
+ type: boolean
+ description: enables off-chip resistor divider for Vbus
+
+ samsung,picophy-pre-emp-curr-control:
+ description:
+ HS Transmitter Pre-Emphasis Current Control. This signal controls
+ the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN
+ pins after a J-to-K or K-to-J transition. The range is from 0x0 to
+ 0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
+ bits of USBNC_n_PHY_CFG1.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x0
+ maximum: 0x3
+
+ samsung,picophy-dc-vol-level-adjust:
+ description:
+ HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC
+ level voltage. The range is from 0x0 to 0xf, the default value is
+ 0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x0
+ maximum: 0xf
+
+ fsl,picophy-rise-fall-time-adjust:
+ description:
+ HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times
+ of the high-speed transmitter waveform. It has no unit. The rise/fall
+ time will be increased or decreased by a certain percentage relative
+ to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%)
+ Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+ default: 1
+
+ fsl,usbphy:
+ description: phandle of usb phy that connects to the port. Use "phys" instead.
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+required:
+ - compatible
+
+allOf:
+ - $ref: chipidea,usb2-common.yaml#
+ - if:
+ properties:
+ phy_type:
+ const: hsic
+ required:
+ - phy_type
+ then:
+ properties:
+ pinctrl-names:
+ items:
+ - const: idle
+ - const: active
+
+ # imx27 Soc needs three clocks
+ - if:
+ properties:
+ compatible:
+ const: fsl,imx27-usb
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ clock-names:
+ items:
+ - const: ipg
+ - const: ahb
+ - const: per
+
+ # imx25 and imx35 Soc need three clocks
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx25-usb
+ - fsl,imx35-usb
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ clock-names:
+ items:
+ - const: ipg
+ - const: ahb
+ - const: per
+
+ # imx93 Soc needs two clocks
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx93-usb
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ items:
+ - const: usb_ctrl_root
+ - const: usb_wakeup
+
+ # imx7d Soc need one clock
+ - if:
+ properties:
+ compatible:
+ items:
+ - const: fsl,imx7d-usb
+ - const: fsl,imx27-usb
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names: false
+
+ # other Soc need one clock
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx23-usb
+ - fsl,imx28-usb
+ - fsl,imx50-usb
+ - fsl,imx51-usb
+ - fsl,imx53-usb
+ - fsl,imx6q-usb
+ - fsl,imx6sl-usb
+ - fsl,imx6sx-usb
+ - fsl,imx6ul-usb
+ - fsl,imx8mm-usb
+ - fsl,imx8mn-usb
+ - fsl,vf610-usb
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx7d-clock.h>
+
+ usb@30b10000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b10000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ phy-clkgate-delay-us = <400>;
+ };
+
+ # Example for HSIC:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+
+ usb@2184400 {
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184400 0x200>;
+ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc 2>;
+ phy_type = "hsic";
+ dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ pinctrl-names = "idle", "active";
+ pinctrl-0 = <&pinctrl_usbh2_idle>;
+ pinctrl-1 = <&pinctrl_usbh2_active>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@1 {
+ compatible = "usb424,9730";
+ reg = <1>;
+ };
+ };
+
+...
diff --git a/dts/upstream/Bindings/usb/ci-hdrc-usb2.yaml b/dts/upstream/Bindings/usb/ci-hdrc-usb2.yaml
index 3b56e0e..cc5787a 100644
--- a/dts/upstream/Bindings/usb/ci-hdrc-usb2.yaml
+++ b/dts/upstream/Bindings/usb/ci-hdrc-usb2.yaml
@@ -15,7 +15,6 @@ properties:
oneOf:
- enum:
- chipidea,usb2
- - fsl,imx27-usb
- lsi,zevio-usb
- nuvoton,npcm750-udc
- nvidia,tegra20-ehci
@@ -32,40 +31,6 @@ properties:
- nvidia,tegra210-ehci
- const: nvidia,tegra30-ehci
- items:
- - enum:
- - fsl,imx23-usb
- - fsl,imx25-usb
- - fsl,imx28-usb
- - fsl,imx35-usb
- - fsl,imx50-usb
- - fsl,imx51-usb
- - fsl,imx53-usb
- - fsl,imx6q-usb
- - fsl,imx6sl-usb
- - fsl,imx6sx-usb
- - fsl,imx6ul-usb
- - fsl,imx7d-usb
- - fsl,vf610-usb
- - const: fsl,imx27-usb
- - items:
- - enum:
- - fsl,imx8dxl-usb
- - fsl,imx8ulp-usb
- - const: fsl,imx7ulp-usb
- - const: fsl,imx6ul-usb
- - items:
- - enum:
- - fsl,imx8mm-usb
- - fsl,imx8mn-usb
- - const: fsl,imx7d-usb
- - const: fsl,imx27-usb
- - items:
- - enum:
- - fsl,imx6sll-usb
- - fsl,imx7ulp-usb
- - const: fsl,imx6ul-usb
- - const: fsl,imx27-usb
- - items:
- const: xlnx,zynq-usb-2.20a
- const: chipidea,usb2
- items:
@@ -73,163 +38,18 @@ properties:
- nuvoton,npcm845-udc
- const: nuvoton,npcm750-udc
- reg:
- minItems: 1
- maxItems: 2
-
- interrupts:
- minItems: 1
- maxItems: 2
-
clocks:
minItems: 1
- maxItems: 3
+ maxItems: 2
clock-names:
minItems: 1
- maxItems: 3
-
- dr_mode: true
-
- power-domains:
- maxItems: 1
-
- resets:
- maxItems: 1
-
- reset-names:
- maxItems: 1
-
- "#reset-cells":
- const: 1
-
- phy_type: true
-
- itc-setting:
- description:
- interrupt threshold control register control, the setting should be
- aligned with ITC bits at register USBCMD.
- $ref: /schemas/types.yaml#/definitions/uint32
-
- ahb-burst-config:
- description:
- it is vendor dependent, the required value should be aligned with
- AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is
- used to change AHB burst configuration, check the chipidea spec for
- meaning of each value. If this property is not existed, it will use
- the reset value.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0x0
- maximum: 0x7
-
- tx-burst-size-dword:
- description:
- it is vendor dependent, the tx burst size in dword (4 bytes), This
- register represents the maximum length of a the burst in 32-bit
- words while moving data from system memory to the USB bus, the value
- of this property will only take effect if property "ahb-burst-config"
- is set to 0, if this property is missing the reset default of the
- hardware implementation will be used.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0x0
- maximum: 0x20
-
- rx-burst-size-dword:
- description:
- it is vendor dependent, the rx burst size in dword (4 bytes), This
- register represents the maximum length of a the burst in 32-bit words
- while moving data from the USB bus to system memory, the value of
- this property will only take effect if property "ahb-burst-config"
- is set to 0, if this property is missing the reset default of the
- hardware implementation will be used.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0x0
- maximum: 0x20
-
- extcon:
- description:
- Phandles to external connector devices. First phandle should point
- to external connector, which provide "USB" cable events, the second
- should point to external connector device, which provide "USB-HOST"
- cable events. If one of the external connector devices is not
- required, empty <0> phandle should be specified.
- $ref: /schemas/types.yaml#/definitions/phandle-array
- minItems: 1
- items:
- - description: vbus extcon
- - description: id extcon
-
- phy-clkgate-delay-us:
- description:
- The delay time (us) between putting the PHY into low power mode and
- gating the PHY clock.
-
- non-zero-ttctrl-ttha:
- description:
- After setting this property, the value of register ttctrl.ttha
- will be 0x7f; if not, the value will be 0x0, this is the default
- value. It needs to be very carefully for setting this property, it
- is recommended that consult with your IC engineer before setting
- this value. On the most of chipidea platforms, the "usage_tt" flag
- at RTL is 0, so this property only affects siTD.
-
- If this property is not set, the max packet size is 1023 bytes, and
- if the total of packet size for previous transactions are more than
- 256 bytes, it can't accept any transactions within this frame. The
- use case is single transaction, but higher frame rate.
-
- If this property is set, the max packet size is 188 bytes, it can
- handle more transactions than above case, it can accept transactions
- until it considers the left room size within frame is less than 188
- bytes, software needs to make sure it does not send more than 90%
- maximum_periodic_data_per_frame. The use case is multiple
- transactions, but less frame rate.
- type: boolean
-
- mux-controls:
- description:
- The mux control for toggling host/device output of this controller.
- It's expected that a mux state of 0 indicates device mode and a mux
- state of 1 indicates host mode.
- maxItems: 1
-
- mux-control-names:
- const: usb_switch
+ maxItems: 2
operating-points-v2:
description: A phandle to the OPP table containing the performance states.
$ref: /schemas/types.yaml#/definitions/phandle
- pinctrl-names:
- description:
- Names for optional pin modes in "default", "host", "device".
- In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
- In this case, the "idle" state needs to pull down the data and
- strobe pin and the "active" state needs to pull up the strobe pin.
- oneOf:
- - items:
- - const: idle
- - const: active
- - items:
- - const: default
- - enum:
- - host
- - device
- - items:
- - const: default
-
- pinctrl-0:
- maxItems: 1
-
- pinctrl-1:
- maxItems: 1
-
- phys:
- maxItems: 1
-
- phy-names:
- const: usb-phy
-
phy-select:
description:
Phandler of TCSR node with two argument that indicate register
@@ -240,87 +60,6 @@ properties:
- description: register offset
- description: phy index
- vbus-supply:
- description: reference to the VBUS regulator.
-
- fsl,usbmisc:
- description:
- Phandler of non-core register device, with one argument that
- indicate usb controller index
- $ref: /schemas/types.yaml#/definitions/phandle-array
- items:
- - items:
- - description: phandle to usbmisc node
- - description: index of usb controller
-
- fsl,anatop:
- description: phandle for the anatop node.
- $ref: /schemas/types.yaml#/definitions/phandle
-
- disable-over-current:
- type: boolean
- description: disable over current detect
-
- over-current-active-low:
- type: boolean
- description: over current signal polarity is active low
-
- over-current-active-high:
- type: boolean
- description:
- Over current signal polarity is active high. It's recommended to
- specify the over current polarity.
-
- power-active-high:
- type: boolean
- description: power signal polarity is active high
-
- external-vbus-divider:
- type: boolean
- description: enables off-chip resistor divider for Vbus
-
- samsung,picophy-pre-emp-curr-control:
- description:
- HS Transmitter Pre-Emphasis Current Control. This signal controls
- the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN
- pins after a J-to-K or K-to-J transition. The range is from 0x0 to
- 0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
- bits of USBNC_n_PHY_CFG1.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0x0
- maximum: 0x3
-
- samsung,picophy-dc-vol-level-adjust:
- description:
- HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC
- level voltage. The range is from 0x0 to 0xf, the default value is
- 0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0x0
- maximum: 0xf
-
- fsl,picophy-rise-fall-time-adjust:
- description:
- HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times
- of the high-speed transmitter waveform. It has no unit. The rise/fall
- time will be increased or decreased by a certain percentage relative
- to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%)
- Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 3
- default: 1
-
- usb-phy:
- description: phandle for the PHY device. Use "phys" instead.
- maxItems: 1
- deprecated: true
-
- fsl,usbphy:
- description: phandle of usb phy that connects to the port. Use "phys" instead.
- $ref: /schemas/types.yaml#/definitions/phandle
- deprecated: true
-
nvidia,phy:
description: phandle of usb phy that connects to the port. Use "phys" instead.
$ref: /schemas/types.yaml#/definitions/phandle
@@ -331,16 +70,6 @@ properties:
type: boolean
deprecated: true
- port:
- description:
- Any connector to the data bus of this controller should be modelled
- using the OF graph bindings specified, if the "usb-role-switch"
- property is used.
- $ref: /schemas/graph.yaml#/properties/port
-
- reset-gpios:
- maxItems: 1
-
ulpi:
type: object
additionalProperties: false
@@ -350,67 +79,13 @@ properties:
type: object
$ref: /schemas/phy/qcom,usb-hs-phy.yaml
-dependencies:
- port: [ usb-role-switch ]
- mux-controls: [ mux-control-names ]
-
required:
- compatible
- - reg
- - interrupts
allOf:
+ - $ref: chipidea,usb2-common.yaml#
- $ref: usb-hcd.yaml#
- $ref: usb-drd.yaml#
- - if:
- properties:
- phy_type:
- const: hsic
- required:
- - phy_type
- then:
- properties:
- pinctrl-names:
- items:
- - const: idle
- - const: active
- else:
- properties:
- pinctrl-names:
- minItems: 1
- maxItems: 2
- oneOf:
- - items:
- - const: default
- - enum:
- - host
- - device
- - items:
- - const: default
- - if:
- properties:
- compatible:
- contains:
- enum:
- - chipidea,usb2
- - lsi,zevio-usb
- - nuvoton,npcm750-udc
- - nvidia,tegra20-udc
- - nvidia,tegra30-udc
- - nvidia,tegra114-udc
- - nvidia,tegra124-udc
- - qcom,ci-hdrc
- - xlnx,zynq-usb-2.20a
- then:
- properties:
- fsl,usbmisc: false
- disable-over-current: false
- over-current-active-low: false
- over-current-active-high: false
- power-active-high: false
- external-vbus-divider: false
- samsung,picophy-pre-emp-curr-control: false
- samsung,picophy-dc-vol-level-adjust: false
unevaluatedProperties: false
@@ -438,33 +113,4 @@ examples:
mux-control-names = "usb_switch";
};
- # Example for HSIC:
- - |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/imx6qdl-clock.h>
-
- usb@2184400 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184400 0x200>;
- interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_USBOH3>;
- fsl,usbphy = <&usbphynop1>;
- fsl,usbmisc = <&usbmisc 2>;
- phy_type = "hsic";
- dr_mode = "host";
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x10>;
- rx-burst-size-dword = <0x10>;
- pinctrl-names = "idle", "active";
- pinctrl-0 = <&pinctrl_usbh2_idle>;
- pinctrl-1 = <&pinctrl_usbh2_active>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethernet@1 {
- compatible = "usb424,9730";
- reg = <1>;
- };
- };
-
...
diff --git a/dts/upstream/Bindings/usb/cypress,hx3.yaml b/dts/upstream/Bindings/usb/cypress,hx3.yaml
index 2809661..e44e88d 100644
--- a/dts/upstream/Bindings/usb/cypress,hx3.yaml
+++ b/dts/upstream/Bindings/usb/cypress,hx3.yaml
@@ -51,7 +51,6 @@ examples:
#include <dt-bindings/gpio/gpio.h>
usb {
- dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/upstream/Bindings/usb/dwc2.yaml b/dts/upstream/Bindings/usb/dwc2.yaml
index 0a5c98e..4f36a22 100644
--- a/dts/upstream/Bindings/usb/dwc2.yaml
+++ b/dts/upstream/Bindings/usb/dwc2.yaml
@@ -59,6 +59,7 @@ properties:
- const: amcc,dwc-otg
- const: apm,apm82181-dwc-otg
- const: snps,dwc2
+ - const: sophgo,cv1800-usb
- const: st,stm32f4x9-fsotg
- const: st,stm32f4x9-hsotg
- const: st,stm32f7-hsotg
@@ -172,6 +173,10 @@ properties:
tpl-support: true
+ access-controllers:
+ minItems: 1
+ maxItems: 2
+
dependencies:
port: [ usb-role-switch ]
role-switch-default-mode: [ usb-role-switch ]
diff --git a/dts/upstream/Bindings/usb/fsl,usbmisc.yaml b/dts/upstream/Bindings/usb/fsl,usbmisc.yaml
index 2d3589d..0a6e7ac 100644
--- a/dts/upstream/Bindings/usb/fsl,usbmisc.yaml
+++ b/dts/upstream/Bindings/usb/fsl,usbmisc.yaml
@@ -33,6 +33,7 @@ properties:
- fsl,imx7ulp-usbmisc
- fsl,imx8mm-usbmisc
- fsl,imx8mn-usbmisc
+ - fsl,imx8ulp-usbmisc
- const: fsl,imx7d-usbmisc
- const: fsl,imx6q-usbmisc
- items:
diff --git a/dts/upstream/Bindings/usb/mediatek,mtk-xhci.yaml b/dts/upstream/Bindings/usb/mediatek,mtk-xhci.yaml
index 924fd3d..ef3143f 100644
--- a/dts/upstream/Bindings/usb/mediatek,mtk-xhci.yaml
+++ b/dts/upstream/Bindings/usb/mediatek,mtk-xhci.yaml
@@ -29,6 +29,7 @@ properties:
- mediatek,mt7623-xhci
- mediatek,mt7629-xhci
- mediatek,mt7986-xhci
+ - mediatek,mt7988-xhci
- mediatek,mt8173-xhci
- mediatek,mt8183-xhci
- mediatek,mt8186-xhci
diff --git a/dts/upstream/Bindings/usb/microchip,usb2514.yaml b/dts/upstream/Bindings/usb/microchip,usb2514.yaml
new file mode 100644
index 0000000..783c275
--- /dev/null
+++ b/dts/upstream/Bindings/usb/microchip,usb2514.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,usb2514.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB2514 Hub Controller
+
+maintainers:
+ - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+ - $ref: usb-hcd.yaml#
+
+properties:
+ compatible:
+ enum:
+ - usb424,2412
+ - usb424,2417
+ - usb424,2514
+
+ reg: true
+
+ reset-gpios:
+ description: GPIO connected to the RESET_N pin.
+
+ vdd-supply:
+ description: 3.3V power supply.
+
+ clocks:
+ description: External 24MHz clock connected to the CLKIN pin.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb-hub@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&reg_3v3_hub>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@1 {
+ compatible = "usbb95,772b";
+ reg = <1>;
+ };
+ };
+ };
diff --git a/dts/upstream/Bindings/usb/qcom,dwc3.yaml b/dts/upstream/Bindings/usb/qcom,dwc3.yaml
index 38a3404..cf633d4 100644
--- a/dts/upstream/Bindings/usb/qcom,dwc3.yaml
+++ b/dts/upstream/Bindings/usb/qcom,dwc3.yaml
@@ -26,10 +26,12 @@ properties:
- qcom,msm8998-dwc3
- qcom,qcm2290-dwc3
- qcom,qcs404-dwc3
+ - qcom,qdu1000-dwc3
- qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sc8280xp-dwc3
+ - qcom,sc8280xp-dwc3-mp
- qcom,sdm660-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
@@ -117,11 +119,11 @@ properties:
exception of SDM670/SDM845/SM6350.
- ss_phy_irq: Used for remote wakeup in Super Speed mode of operation.
minItems: 2
- maxItems: 5
+ maxItems: 18
interrupt-names:
minItems: 2
- maxItems: 5
+ maxItems: 18
qcom,select-utmi-as-pipe-clk:
description:
@@ -245,6 +247,7 @@ allOf:
contains:
enum:
- qcom,ipq8074-dwc3
+ - qcom,qdu1000-dwc3
then:
properties:
clocks:
@@ -282,6 +285,7 @@ allOf:
contains:
enum:
- qcom,sc8280xp-dwc3
+ - qcom,sc8280xp-dwc3-mp
- qcom,x1e80100-dwc3
then:
properties:
@@ -440,6 +444,7 @@ allOf:
- qcom,ipq4019-dwc3
- qcom,ipq8064-dwc3
- qcom,msm8994-dwc3
+ - qcom,qdu1000-dwc3
- qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
@@ -470,6 +475,38 @@ allOf:
- const: dm_hs_phy_irq
- const: ss_phy_irq
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-dwc3-mp
+ then:
+ properties:
+ interrupts:
+ minItems: 18
+ maxItems: 18
+ interrupt-names:
+ items:
+ - const: pwr_event_1
+ - const: pwr_event_2
+ - const: pwr_event_3
+ - const: pwr_event_4
+ - const: hs_phy_1
+ - const: hs_phy_2
+ - const: hs_phy_3
+ - const: hs_phy_4
+ - const: dp_hs_phy_1
+ - const: dm_hs_phy_1
+ - const: dp_hs_phy_2
+ - const: dm_hs_phy_2
+ - const: dp_hs_phy_3
+ - const: dm_hs_phy_3
+ - const: dp_hs_phy_4
+ - const: dm_hs_phy_4
+ - const: ss_phy_1
+ - const: ss_phy_2
+
additionalProperties: false
examples:
diff --git a/dts/upstream/Bindings/usb/qcom,pmic-typec.yaml b/dts/upstream/Bindings/usb/qcom,pmic-typec.yaml
index d969457..6d3ef36 100644
--- a/dts/upstream/Bindings/usb/qcom,pmic-typec.yaml
+++ b/dts/upstream/Bindings/usb/qcom,pmic-typec.yaml
@@ -21,6 +21,7 @@ properties:
- items:
- enum:
- qcom,pm6150-typec
+ - qcom,pm7250b-typec
- const: qcom,pm8150b-typec
- items:
- enum:
@@ -192,15 +193,22 @@ examples:
port@0 {
reg = <0>;
- pmic_typec_mux_out: endpoint {
- remote-endpoint = <&usb_phy_typec_mux_in>;
+ pmic_typec_hs_in: endpoint {
+ remote-endpoint = <&usb_hs_out>;
};
};
port@1 {
reg = <1>;
- pmic_typec_role_switch_out: endpoint {
- remote-endpoint = <&usb_role_switch_in>;
+ pmic_typec_ss_in: endpoint {
+ remote-endpoint = <&usb_phy_typec_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ pmic_typec_sbu: endpoint {
+ remote-endpoint = <&usb_mux_sbu>;
};
};
};
@@ -212,8 +220,8 @@ examples:
dr_mode = "otg";
usb-role-switch;
port {
- usb_role_switch_in: endpoint {
- remote-endpoint = <&pmic_typec_role_switch_out>;
+ usb_hs_out: endpoint {
+ remote-endpoint = <&pmic_typec_hs_in>;
};
};
};
@@ -221,8 +229,19 @@ examples:
usb-phy {
orientation-switch;
port {
- usb_phy_typec_mux_in: endpoint {
- remote-endpoint = <&pmic_typec_mux_out>;
+ usb_phy_typec_ss_out: endpoint {
+ remote-endpoint = <&pmic_typec_ss_in>;
+ };
+ };
+ };
+
+ usb-mux {
+ orientation-switch;
+ mode-switch;
+
+ port {
+ usb_mux_sbu: endpoint {
+ remote-endpoint = <&pmic_typec_sbu>;
};
};
};
diff --git a/dts/upstream/Bindings/usb/realtek,rts5411.yaml b/dts/upstream/Bindings/usb/realtek,rts5411.yaml
index 0874fc2..6577a61 100644
--- a/dts/upstream/Bindings/usb/realtek,rts5411.yaml
+++ b/dts/upstream/Bindings/usb/realtek,rts5411.yaml
@@ -65,6 +65,7 @@ patternProperties:
description: The hard wired USB devices
type: object
$ref: /schemas/usb/usb-device.yaml
+ additionalProperties: true
required:
- peer-hub
diff --git a/dts/upstream/Bindings/usb/renesas,usbhs.yaml b/dts/upstream/Bindings/usb/renesas,usbhs.yaml
index 40ada78..c63db3e 100644
--- a/dts/upstream/Bindings/usb/renesas,usbhs.yaml
+++ b/dts/upstream/Bindings/usb/renesas,usbhs.yaml
@@ -19,10 +19,14 @@ properties:
- items:
- enum:
- renesas,usbhs-r7s9210 # RZ/A2
+ - const: renesas,rza2-usbhs
+
+ - items:
+ - enum:
- renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five
- renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
- renesas,usbhs-r9a07g054 # RZ/V2L
- - const: renesas,rza2-usbhs
+ - const: renesas,rzg2l-usbhs
- items:
- enum:
diff --git a/dts/upstream/Bindings/usb/samsung,exynos-dwc3.yaml b/dts/upstream/Bindings/usb/samsung,exynos-dwc3.yaml
index 1ade99e..2b3430c 100644
--- a/dts/upstream/Bindings/usb/samsung,exynos-dwc3.yaml
+++ b/dts/upstream/Bindings/usb/samsung,exynos-dwc3.yaml
@@ -12,6 +12,7 @@ maintainers:
properties:
compatible:
enum:
+ - google,gs101-dwusb3
- samsung,exynos5250-dwusb3
- samsung,exynos5433-dwusb3
- samsung,exynos7-dwusb3
@@ -59,6 +60,23 @@ allOf:
properties:
compatible:
contains:
+ const: google,gs101-dwusb3
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+ clock-names:
+ items:
+ - const: bus_early
+ - const: susp_clk
+ - const: link_aclk
+ - const: link_pclk
+
+ - if:
+ properties:
+ compatible:
+ contains:
const: samsung,exynos5250-dwusb3
then:
properties:
diff --git a/dts/upstream/Bindings/usb/snps,dwc3.yaml b/dts/upstream/Bindings/usb/snps,dwc3.yaml
index 203a1eb..1cd0ca9 100644
--- a/dts/upstream/Bindings/usb/snps,dwc3.yaml
+++ b/dts/upstream/Bindings/usb/snps,dwc3.yaml
@@ -85,15 +85,16 @@ properties:
phys:
minItems: 1
- maxItems: 2
+ maxItems: 19
phy-names:
minItems: 1
- maxItems: 2
- items:
- enum:
- - usb2-phy
- - usb3-phy
+ maxItems: 19
+ oneOf:
+ - items:
+ enum: [ usb2-phy, usb3-phy ]
+ - items:
+ pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$"
power-domains:
description:
diff --git a/dts/upstream/Bindings/usb/usb-uhci.txt b/dts/upstream/Bindings/usb/usb-uhci.txt
deleted file mode 100644
index d1702eb..0000000
--- a/dts/upstream/Bindings/usb/usb-uhci.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Generic Platform UHCI Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "generic-uhci" (deprecated: "platform-uhci")
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : UHCI controller interrupt
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-Example:
-
- uhci@d8007b00 {
- compatible = "generic-uhci";
- reg = <0xd8007b00 0x200>;
- interrupts = <43>;
- };
diff --git a/dts/upstream/Bindings/usb/usb-uhci.yaml b/dts/upstream/Bindings/usb/usb-uhci.yaml
new file mode 100644
index 0000000..d8336f7
--- /dev/null
+++ b/dts/upstream/Bindings/usb/usb-uhci.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-uhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Platform UHCI Controller
+
+maintainers:
+ - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: generic-uhci
+ - const: platform-uhci
+ deprecated: true
+ - items:
+ - enum:
+ - aspeed,ast2400-uhci
+ - aspeed,ast2500-uhci
+ - aspeed,ast2600-uhci
+ - const: generic-uhci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#ports':
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: usb-hcd.yaml
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: generic-uhci
+ then:
+ required:
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+
+ usb@d8007b00 {
+ compatible = "generic-uhci";
+ reg = <0xd8007b00 0x200>;
+ interrupts = <43>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+ };
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+
+ usb@1e6b0000 {
+ compatible = "aspeed,ast2500-uhci", "generic-uhci";
+ reg = <0x1e6b0000 0x100>;
+ interrupts = <14>;
+ #ports = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+ };
+...
diff --git a/dts/upstream/Bindings/vendor-prefixes.yaml b/dts/upstream/Bindings/vendor-prefixes.yaml
index b97d298..fbf47f0 100644
--- a/dts/upstream/Bindings/vendor-prefixes.yaml
+++ b/dts/upstream/Bindings/vendor-prefixes.yaml
@@ -151,6 +151,8 @@ patternProperties:
description: ARM Ltd.
"^armadeus,.*":
description: ARMadeus Systems SARL
+ "^armsom,.*":
+ description: ArmSoM Technology Co., Ltd.
"^arrow,.*":
description: Arrow Electronics
"^artesyn,.*":
@@ -256,6 +258,8 @@ patternProperties:
description: Catalyst Semiconductor, Inc.
"^cavium,.*":
description: Cavium, Inc.
+ "^cct,.*":
+ description: Crystal Clear Technology Sdn. Bhd.
"^cdns,.*":
description: Cadence Design Systems Inc.
"^cdtech,.*":
@@ -438,6 +442,8 @@ patternProperties:
description: Dongguan EmbedFire Electronic Technology Co., Ltd.
"^embest,.*":
description: Shenzhen Embest Technology Co., Ltd.
+ "^emcraft,.*":
+ description: Emcraft Systems
"^emlid,.*":
description: Emlid, Ltd.
"^emmicro,.*":
@@ -529,6 +535,8 @@ patternProperties:
description: FX Technology Ltd.
"^galaxycore,.*":
description: GalaxyCore Inc.
+ "^gameforce,.*":
+ description: GameForce
"^gardena,.*":
description: GARDENA GmbH
"^gateway,.*":
@@ -1627,6 +1635,8 @@ patternProperties:
description: Wondermedia Technologies, Inc.
"^wobo,.*":
description: Wobo
+ "^wolfvision,.*":
+ description: WolfVision GmbH
"^x-powers,.*":
description: X-Powers
"^xen,.*":
diff --git a/dts/upstream/Bindings/watchdog/aspeed,ast2400-wdt.yaml b/dts/upstream/Bindings/watchdog/aspeed,ast2400-wdt.yaml
new file mode 100644
index 0000000..be78a98
--- /dev/null
+++ b/dts/upstream/Bindings/watchdog/aspeed,ast2400-wdt.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed watchdog timer controllers
+
+maintainers:
+ - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-wdt
+ - aspeed,ast2500-wdt
+ - aspeed,ast2600-wdt
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: >
+ The clock used to drive the watchdog counter. From the AST2500 no source
+ other than the 1MHz clock can be selected, so the clocks property is
+ optional.
+
+ aspeed,reset-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - cpu
+ - soc
+ - system
+ - none
+ default: system
+ description: >
+ The watchdog can be programmed to generate one of three different types of
+ reset when a timeout occcurs.
+
+ Specifying 'cpu' will only reset the processor on a timeout event.
+
+ Specifying 'soc' will reset a configurable subset of the SoC's controllers
+ on a timeout event. Controllers critical to the SoC's operation may remain
+ untouched. The set of SoC controllers to reset may be specified via the
+ aspeed,reset-mask property if the node has the aspeed,ast2500-wdt or
+ aspeed,ast2600-wdt compatible.
+
+ Specifying 'system' will reset all controllers on a timeout event, as if
+ EXTRST had been asserted.
+
+ Specifying 'none' will cause the timeout event to have no reset effect.
+ Another watchdog engine on the chip must be used for chip reset operations.
+
+ aspeed,alt-boot:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: >
+ Direct the watchdog to configure the SoC to boot from the alternative boot
+ region if a timeout occurs.
+
+ aspeed,external-signal:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: >
+ Assert the timeout event on an external signal pin associated with the
+ watchdog controller instance. The pin must be muxed appropriately.
+
+ aspeed,ext-pulse-duration:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The duration, in microseconds, of the pulse emitted on the external signal
+ pin.
+
+ aspeed,ext-push-pull:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: >
+ If aspeed,external-signal is specified in the node, set the external
+ signal pin's drive type to push-pull. If aspeed,ext-push-pull is not
+ specified then the pin is configured as open-drain.
+
+ aspeed,ext-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: >
+ If both aspeed,external-signal and aspeed,ext-push-pull are specified in
+ the node, set the pulse polarity to active-high. If aspeed,ext-active-high
+ is not specified then the pin is configured as active-low.
+
+ aspeed,reset-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ description: >
+ A bitmask indicating which peripherals will be reset if the watchdog
+ timer expires. On AST2500 SoCs this should be a single word defined using
+ the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word
+ array with the first word defined using the AST2600_WDT_RESET1_* macros,
+ and the second word defined using the AST2600_WDT_RESET2_* macros.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ anyOf:
+ - required:
+ - aspeed,ext-push-pull
+ - required:
+ - aspeed,ext-active-high
+ - required:
+ - aspeed,reset-mask
+ then:
+ properties:
+ compatible:
+ enum:
+ - aspeed,ast2500-wdt
+ - aspeed,ast2600-wdt
+ - if:
+ required:
+ - aspeed,ext-active-high
+ then:
+ required:
+ - aspeed,ext-push-pull
+
+additionalProperties: false
+
+examples:
+ - |
+ watchdog@1e785000 {
+ compatible = "aspeed,ast2400-wdt";
+ reg = <0x1e785000 0x1c>;
+ aspeed,reset-type = "system";
+ aspeed,external-signal;
+ };
+ - |
+ #include <dt-bindings/watchdog/aspeed-wdt.h>
+ watchdog@1e785040 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785040 0x40>;
+ aspeed,reset-type = "soc";
+ aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
+ (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
+ };
diff --git a/dts/upstream/Bindings/watchdog/aspeed-wdt.txt b/dts/upstream/Bindings/watchdog/aspeed-wdt.txt
deleted file mode 100644
index 3208adb..0000000
--- a/dts/upstream/Bindings/watchdog/aspeed-wdt.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Aspeed Watchdog Timer
-
-Required properties:
- - compatible: must be one of:
- - "aspeed,ast2400-wdt"
- - "aspeed,ast2500-wdt"
- - "aspeed,ast2600-wdt"
-
- - reg: physical base address of the controller and length of memory mapped
- region
-
-Optional properties:
-
- - aspeed,reset-type = "cpu|soc|system|none"
-
- Reset behavior - Whenever a timeout occurs the watchdog can be programmed
- to generate one of three different, mutually exclusive, types of resets.
-
- Type "none" can be specified to indicate that no resets are to be done.
- This is useful in situations where another watchdog engine on chip is
- to perform the reset.
-
- If 'aspeed,reset-type=' is not specified the default is to enable system
- reset.
-
- Reset types:
-
- - cpu: Reset CPU on watchdog timeout
-
- - soc: Reset 'System on Chip' on watchdog timeout
-
- - system: Reset system on watchdog timeout
-
- - none: No reset is performed on timeout. Assumes another watchdog
- engine is responsible for this.
-
- - aspeed,alt-boot: If property is present then boot from alternate block.
- - aspeed,external-signal: If property is present then signal is sent to
- external reset counter (only WDT1 and WDT2). If not
- specified no external signal is sent.
- - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
-
-Optional properties for AST2500-compatible watchdogs:
- - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
- drive type to push-pull. The default is open-drain.
- - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
- is configured as push-pull, then set the pulse
- polarity to active-high. The default is active-low.
-
-Optional properties for AST2500- and AST2600-compatible watchdogs:
- - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if
- the watchdog timer expires. On AST2500 this should be a
- single word defined using the AST2500_WDT_RESET_* macros;
- on AST2600 this should be a two-word array with the first
- word defined using the AST2600_WDT_RESET1_* macros and the
- second word defined using the AST2600_WDT_RESET2_* macros.
-
-Examples:
-
- wdt1: watchdog@1e785000 {
- compatible = "aspeed,ast2400-wdt";
- reg = <0x1e785000 0x1c>;
- aspeed,reset-type = "system";
- aspeed,external-signal;
- };
-
- #include <dt-bindings/watchdog/aspeed-wdt.h>
- wdt2: watchdog@1e785040 {
- compatible = "aspeed,ast2600-wdt";
- reg = <0x1e785040 0x40>;
- aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
- (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
- };
diff --git a/dts/upstream/Bindings/watchdog/twl4030-wdt.txt b/dts/upstream/Bindings/watchdog/twl4030-wdt.txt
deleted file mode 100644
index 80a3719..0000000
--- a/dts/upstream/Bindings/watchdog/twl4030-wdt.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Device tree bindings for twl4030-wdt driver (TWL4030 watchdog)
-
-Required properties:
- compatible = "ti,twl4030-wdt";
-
-Example:
-
-watchdog {
- compatible = "ti,twl4030-wdt";
-};
diff --git a/dts/upstream/include/dt-bindings/arm/mhuv3-dt.h b/dts/upstream/include/dt-bindings/arm/mhuv3-dt.h
new file mode 100644
index 0000000..4575406
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/arm/mhuv3-dt.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * This header provides constants for the defined MHUv3 types.
+ */
+
+#ifndef _DT_BINDINGS_ARM_MHUV3_DT_H
+#define _DT_BINDINGS_ARM_MHUV3_DT_H
+
+#define DBE_EXT 0
+#define FCE_EXT 1
+#define FE_EXT 2
+
+#endif /* _DT_BINDINGS_ARM_MHUV3_DT_H */
diff --git a/dts/upstream/include/dt-bindings/arm/qcom,ids.h b/dts/upstream/include/dt-bindings/arm/qcom,ids.h
index 19ac7b3..d040033 100644
--- a/dts/upstream/include/dt-bindings/arm/qcom,ids.h
+++ b/dts/upstream/include/dt-bindings/arm/qcom,ids.h
@@ -258,6 +258,7 @@
#define QCOM_ID_QRU1000 539
#define QCOM_ID_SM8475_2 540
#define QCOM_ID_QDU1000 545
+#define QCOM_ID_X1E80100 555
#define QCOM_ID_SM8650 557
#define QCOM_ID_SM4450 568
#define QCOM_ID_QDU1010 587
diff --git a/dts/upstream/include/dt-bindings/clock/google,gs101.h b/dts/upstream/include/dt-bindings/clock/google,gs101.h
index 3dac357..442f9e9 100644
--- a/dts/upstream/include/dt-bindings/clock/google,gs101.h
+++ b/dts/upstream/include/dt-bindings/clock/google,gs101.h
@@ -313,6 +313,122 @@
#define CLK_APM_PLL_DIV4_APM 70
#define CLK_APM_PLL_DIV16_APM 71
+/* CMU_HSI0 */
+#define CLK_FOUT_USB_PLL 1
+#define CLK_MOUT_PLL_USB 2
+#define CLK_MOUT_HSI0_ALT_USER 3
+#define CLK_MOUT_HSI0_BUS_USER 4
+#define CLK_MOUT_HSI0_DPGTC_USER 5
+#define CLK_MOUT_HSI0_TCXO_USER 6
+#define CLK_MOUT_HSI0_USB20_USER 7
+#define CLK_MOUT_HSI0_USB31DRD_USER 8
+#define CLK_MOUT_HSI0_USBDPDBG_USER 9
+#define CLK_MOUT_HSI0_BUS 10
+#define CLK_MOUT_HSI0_USB20_REF 11
+#define CLK_MOUT_HSI0_USB31DRD 12
+#define CLK_DOUT_HSI0_USB31DRD 13
+#define CLK_GOUT_HSI0_PCLK 14
+#define CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26 15
+#define CLK_GOUT_HSI0_CLK_HSI0_ALT 16
+#define CLK_GOUT_HSI0_DP_LINK_I_DP_GTC_CLK 17
+#define CLK_GOUT_HSI0_DP_LINK_I_PCLK 18
+#define CLK_GOUT_HSI0_D_TZPC_HSI0_PCLK 19
+#define CLK_GOUT_HSI0_ETR_MIU_I_ACLK 20
+#define CLK_GOUT_HSI0_ETR_MIU_I_PCLK 21
+#define CLK_GOUT_HSI0_GPC_HSI0_PCLK 22
+#define CLK_GOUT_HSI0_LHM_AXI_G_ETR_HSI0_I_CLK 23
+#define CLK_GOUT_HSI0_LHM_AXI_P_AOCHSI0_I_CLK 24
+#define CLK_GOUT_HSI0_LHM_AXI_P_HSI0_I_CLK 25
+#define CLK_GOUT_HSI0_LHS_ACEL_D_HSI0_I_CLK 26
+#define CLK_GOUT_HSI0_LHS_AXI_D_HSI0AOC_I_CLK 27
+#define CLK_GOUT_HSI0_PPMU_HSI0_AOC_ACLK 28
+#define CLK_GOUT_HSI0_PPMU_HSI0_AOC_PCLK 29
+#define CLK_GOUT_HSI0_PPMU_HSI0_BUS0_ACLK 30
+#define CLK_GOUT_HSI0_PPMU_HSI0_BUS0_PCLK 31
+#define CLK_GOUT_HSI0_CLK_HSI0_BUS_CLK 32
+#define CLK_GOUT_HSI0_SSMT_USB_ACLK 33
+#define CLK_GOUT_HSI0_SSMT_USB_PCLK 34
+#define CLK_GOUT_HSI0_SYSMMU_USB_CLK_S2 35
+#define CLK_GOUT_HSI0_SYSREG_HSI0_PCLK 36
+#define CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK 37
+#define CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK 38
+#define CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK 39
+#define CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK 40
+#define CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL 41
+#define CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY 42
+#define CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26 43
+#define CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40 44
+#define CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_REF_SOC_PLL 45
+#define CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK 46
+#define CLK_GOUT_HSI0_USB31DRD_I_USBPCS_APB_CLK 47
+#define CLK_GOUT_HSI0_USB31DRD_USBDPPHY_I_ACLK 48
+#define CLK_GOUT_HSI0_USB31DRD_USBDPPHY_UDBG_I_APB_PCLK 49
+#define CLK_GOUT_HSI0_XIU_D0_HSI0_ACLK 50
+#define CLK_GOUT_HSI0_XIU_D1_HSI0_ACLK 51
+#define CLK_GOUT_HSI0_XIU_P_HSI0_ACLK 52
+
+/* CMU_HSI2 */
+#define CLK_MOUT_HSI2_BUS_USER 1
+#define CLK_MOUT_HSI2_MMC_CARD_USER 2
+#define CLK_MOUT_HSI2_PCIE_USER 3
+#define CLK_MOUT_HSI2_UFS_EMBD_USER 4
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_PHY_REFCLK_IN 5
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_PHY_REFCLK_IN 6
+#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4A_1_ACLK 7
+#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4A_1_PCLK 8
+#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4B_1_ACLK 9
+#define CLK_GOUT_HSI2_SSMT_PCIE_IA_GEN4B_1_PCLK 10
+#define CLK_GOUT_HSI2_D_TZPC_HSI2_PCLK 11
+#define CLK_GOUT_HSI2_GPC_HSI2_PCLK 12
+#define CLK_GOUT_HSI2_GPIO_HSI2_PCLK 13
+#define CLK_GOUT_HSI2_HSI2_CMU_HSI2_PCLK 14
+#define CLK_GOUT_HSI2_LHM_AXI_P_HSI2_I_CLK 15
+#define CLK_GOUT_HSI2_LHS_ACEL_D_HSI2_I_CLK 16
+#define CLK_GOUT_HSI2_MMC_CARD_I_ACLK 17
+#define CLK_GOUT_HSI2_MMC_CARD_SDCLKIN 18
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_DBI_ACLK_UG 19
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_MSTR_ACLK_UG 20
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_SLV_ACLK_UG 21
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_003_I_DRIVER_APB_CLK 22
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_DBI_ACLK_UG 23
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_MSTR_ACLK_UG 24
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_SLV_ACLK_UG 25
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCIE_004_I_DRIVER_APB_CLK 26
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PHY_UDBG_I_APB_PCLK 27
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PIPE_PAL_PCIE_I_APB_PCLK 28
+#define CLK_GOUT_HSI2_PCIE_GEN4_1_PCS_PMA_PCIEPHY210X2_QCH_I_APB_PCLK 29
+#define CLK_GOUT_HSI2_PCIE_IA_GEN4A_1_I_CLK 30
+#define CLK_GOUT_HSI2_PCIE_IA_GEN4B_1_I_CLK 31
+#define CLK_GOUT_HSI2_PPMU_HSI2_ACLK 32
+#define CLK_GOUT_HSI2_PPMU_HSI2_PCLK 33
+#define CLK_GOUT_HSI2_QE_MMC_CARD_HSI2_ACLK 34
+#define CLK_GOUT_HSI2_QE_MMC_CARD_HSI2_PCLK 35
+#define CLK_GOUT_HSI2_QE_PCIE_GEN4A_HSI2_ACLK 36
+#define CLK_GOUT_HSI2_QE_PCIE_GEN4A_HSI2_PCLK 37
+#define CLK_GOUT_HSI2_QE_PCIE_GEN4B_HSI2_ACLK 38
+#define CLK_GOUT_HSI2_QE_PCIE_GEN4B_HSI2_PCLK 39
+#define CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK 40
+#define CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK 41
+#define CLK_GOUT_HSI2_CLK_HSI2_BUS_CLK 42
+#define CLK_GOUT_HSI2_CLK_HSI2_OSCCLK_CLK 43
+#define CLK_GOUT_HSI2_SSMT_HSI2_ACLK 44
+#define CLK_GOUT_HSI2_SSMT_HSI2_PCLK 45
+#define CLK_GOUT_HSI2_SYSMMU_HSI2_CLK_S2 46
+#define CLK_GOUT_HSI2_SYSREG_HSI2_PCLK 47
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_DBI_1_ACLK 48
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_DBI_1_PCLK 49
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_SLV_1_ACLK 50
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4A_SLV_1_PCLK 51
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_DBI_1_ACLK 52
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_DBI_1_PCLK 53
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_SLV_1_ACLK 54
+#define CLK_GOUT_HSI2_UASC_PCIE_GEN4B_SLV_1_PCLK 55
+#define CLK_GOUT_HSI2_UFS_EMBD_I_ACLK 56
+#define CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO 57
+#define CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK 58
+#define CLK_GOUT_HSI2_XIU_D_HSI2_ACLK 59
+#define CLK_GOUT_HSI2_XIU_P_HSI2_ACLK 60
+
/* CMU_MISC */
#define CLK_MOUT_MISC_BUS_USER 1
#define CLK_MOUT_MISC_SSS_USER 2
diff --git a/dts/upstream/include/dt-bindings/clock/loongson,ls2k-clk.h b/dts/upstream/include/dt-bindings/clock/loongson,ls2k-clk.h
index 3bc4dfc..4279ba5 100644
--- a/dts/upstream/include/dt-bindings/clock/loongson,ls2k-clk.h
+++ b/dts/upstream/include/dt-bindings/clock/loongson,ls2k-clk.h
@@ -7,24 +7,40 @@
#ifndef __DT_BINDINGS_CLOCK_LOONGSON2_H
#define __DT_BINDINGS_CLOCK_LOONGSON2_H
-#define LOONGSON2_REF_100M 0
-#define LOONGSON2_NODE_PLL 1
-#define LOONGSON2_DDR_PLL 2
-#define LOONGSON2_DC_PLL 3
-#define LOONGSON2_PIX0_PLL 4
-#define LOONGSON2_PIX1_PLL 5
-#define LOONGSON2_NODE_CLK 6
-#define LOONGSON2_HDA_CLK 7
-#define LOONGSON2_GPU_CLK 8
-#define LOONGSON2_DDR_CLK 9
-#define LOONGSON2_GMAC_CLK 10
-#define LOONGSON2_DC_CLK 11
-#define LOONGSON2_APB_CLK 12
-#define LOONGSON2_USB_CLK 13
-#define LOONGSON2_SATA_CLK 14
-#define LOONGSON2_PIX0_CLK 15
-#define LOONGSON2_PIX1_CLK 16
-#define LOONGSON2_BOOT_CLK 17
-#define LOONGSON2_CLK_END 18
+#define LOONGSON2_REF_100M 0
+#define LOONGSON2_NODE_PLL 1
+#define LOONGSON2_DDR_PLL 2
+#define LOONGSON2_DC_PLL 3
+#define LOONGSON2_PIX0_PLL 4
+#define LOONGSON2_PIX1_PLL 5
+#define LOONGSON2_NODE_CLK 6
+#define LOONGSON2_HDA_CLK 7
+#define LOONGSON2_GPU_CLK 8
+#define LOONGSON2_DDR_CLK 9
+#define LOONGSON2_GMAC_CLK 10
+#define LOONGSON2_DC_CLK 11
+#define LOONGSON2_APB_CLK 12
+#define LOONGSON2_USB_CLK 13
+#define LOONGSON2_SATA_CLK 14
+#define LOONGSON2_PIX0_CLK 15
+#define LOONGSON2_PIX1_CLK 16
+#define LOONGSON2_BOOT_CLK 17
+#define LOONGSON2_OUT0_GATE 18
+#define LOONGSON2_GMAC_GATE 19
+#define LOONGSON2_RIO_GATE 20
+#define LOONGSON2_DC_GATE 21
+#define LOONGSON2_GPU_GATE 22
+#define LOONGSON2_DDR_GATE 23
+#define LOONGSON2_HDA_GATE 24
+#define LOONGSON2_NODE_GATE 25
+#define LOONGSON2_EMMC_GATE 26
+#define LOONGSON2_PIX0_GATE 27
+#define LOONGSON2_PIX1_GATE 28
+#define LOONGSON2_OUT0_CLK 29
+#define LOONGSON2_RIO_CLK 30
+#define LOONGSON2_EMMC_CLK 31
+#define LOONGSON2_DES_CLK 32
+#define LOONGSON2_I2S_CLK 33
+#define LOONGSON2_MISC_CLK 34
#endif
diff --git a/dts/upstream/include/dt-bindings/clock/nxp,imx95-clock.h b/dts/upstream/include/dt-bindings/clock/nxp,imx95-clock.h
new file mode 100644
index 0000000..782662c
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/nxp,imx95-clock.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX95_H
+#define __DT_BINDINGS_CLOCK_IMX95_H
+
+#define IMX95_CLK_VPUBLK_WAVE 0
+#define IMX95_CLK_VPUBLK_JPEG_ENC 1
+#define IMX95_CLK_VPUBLK_JPEG_DEC 2
+
+#define IMX95_CLK_CAMBLK_CSI2_FOR0 0
+#define IMX95_CLK_CAMBLK_CSI2_FOR1 1
+#define IMX95_CLK_CAMBLK_ISP_AXI 2
+#define IMX95_CLK_CAMBLK_ISP_PIXEL 3
+#define IMX95_CLK_CAMBLK_ISP 4
+
+#define IMX95_CLK_DISPMIX_LVDS_PHY_DIV 0
+#define IMX95_CLK_DISPMIX_LVDS_CH0_GATE 1
+#define IMX95_CLK_DISPMIX_LVDS_CH1_GATE 2
+#define IMX95_CLK_DISPMIX_PIX_DI0_GATE 3
+#define IMX95_CLK_DISPMIX_PIX_DI1_GATE 4
+
+#define IMX95_CLK_DISPMIX_ENG0_SEL 0
+#define IMX95_CLK_DISPMIX_ENG1_SEL 1
+
+#endif /* __DT_BINDINGS_CLOCK_IMX95_H */
diff --git a/dts/upstream/include/dt-bindings/clock/r8a73a4-clock.h b/dts/upstream/include/dt-bindings/clock/r8a73a4-clock.h
index 1ec4827..655440a 100644
--- a/dts/upstream/include/dt-bindings/clock/r8a73a4-clock.h
+++ b/dts/upstream/include/dt-bindings/clock/r8a73a4-clock.h
@@ -24,6 +24,10 @@
#define R8A73A4_CLK_ZS 14
#define R8A73A4_CLK_HP 15
+/* MSTP1 */
+#define R8A73A4_CLK_TMU0 25
+#define R8A73A4_CLK_TMU3 21
+
/* MSTP2 */
#define R8A73A4_CLK_DMAC 18
#define R8A73A4_CLK_SCIFB3 17
diff --git a/dts/upstream/include/dt-bindings/clock/r9a07g043-cpg.h b/dts/upstream/include/dt-bindings/clock/r9a07g043-cpg.h
index 77cde8e..1319933 100644
--- a/dts/upstream/include/dt-bindings/clock/r9a07g043-cpg.h
+++ b/dts/upstream/include/dt-bindings/clock/r9a07g043-cpg.h
@@ -16,15 +16,15 @@
#define R9A07G043_CLK_SD0 5
#define R9A07G043_CLK_SD1 6
#define R9A07G043_CLK_M0 7
-#define R9A07G043_CLK_M2 8
-#define R9A07G043_CLK_M3 9
+#define R9A07G043_CLK_M2 8 /* RZ/G2UL Only */
+#define R9A07G043_CLK_M3 9 /* RZ/G2UL Only */
#define R9A07G043_CLK_HP 10
#define R9A07G043_CLK_TSU 11
#define R9A07G043_CLK_ZT 12
#define R9A07G043_CLK_P0 13
#define R9A07G043_CLK_P1 14
#define R9A07G043_CLK_P2 15
-#define R9A07G043_CLK_AT 16
+#define R9A07G043_CLK_AT 16 /* RZ/G2UL Only */
#define R9A07G043_OSCCLK 17
#define R9A07G043_CLK_P0_DIV2 18
@@ -200,5 +200,57 @@
#define R9A07G043_AX45MP_CORE0_RESETN 78 /* RZ/Five Only */
#define R9A07G043_IAX45_RESETN 79 /* RZ/Five Only */
+/* Power domain IDs. */
+#define R9A07G043_PD_ALWAYS_ON 0
+#define R9A07G043_PD_GIC 1 /* RZ/G2UL Only */
+#define R9A07G043_PD_IA55 2 /* RZ/G2UL Only */
+#define R9A07G043_PD_MHU 3 /* RZ/G2UL Only */
+#define R9A07G043_PD_CORESIGHT 4 /* RZ/G2UL Only */
+#define R9A07G043_PD_SYC 5 /* RZ/G2UL Only */
+#define R9A07G043_PD_DMAC 6
+#define R9A07G043_PD_GTM0 7
+#define R9A07G043_PD_GTM1 8
+#define R9A07G043_PD_GTM2 9
+#define R9A07G043_PD_MTU 10
+#define R9A07G043_PD_POE3 11
+#define R9A07G043_PD_WDT0 12
+#define R9A07G043_PD_SPI 13
+#define R9A07G043_PD_SDHI0 14
+#define R9A07G043_PD_SDHI1 15
+#define R9A07G043_PD_ISU 16 /* RZ/G2UL Only */
+#define R9A07G043_PD_CRU 17 /* RZ/G2UL Only */
+#define R9A07G043_PD_LCDC 18 /* RZ/G2UL Only */
+#define R9A07G043_PD_SSI0 19
+#define R9A07G043_PD_SSI1 20
+#define R9A07G043_PD_SSI2 21
+#define R9A07G043_PD_SSI3 22
+#define R9A07G043_PD_SRC 23
+#define R9A07G043_PD_USB0 24
+#define R9A07G043_PD_USB1 25
+#define R9A07G043_PD_USB_PHY 26
+#define R9A07G043_PD_ETHER0 27
+#define R9A07G043_PD_ETHER1 28
+#define R9A07G043_PD_I2C0 29
+#define R9A07G043_PD_I2C1 30
+#define R9A07G043_PD_I2C2 31
+#define R9A07G043_PD_I2C3 32
+#define R9A07G043_PD_SCIF0 33
+#define R9A07G043_PD_SCIF1 34
+#define R9A07G043_PD_SCIF2 35
+#define R9A07G043_PD_SCIF3 36
+#define R9A07G043_PD_SCIF4 37
+#define R9A07G043_PD_SCI0 38
+#define R9A07G043_PD_SCI1 39
+#define R9A07G043_PD_IRDA 40
+#define R9A07G043_PD_RSPI0 41
+#define R9A07G043_PD_RSPI1 42
+#define R9A07G043_PD_RSPI2 43
+#define R9A07G043_PD_CANFD 44
+#define R9A07G043_PD_ADC 45
+#define R9A07G043_PD_TSU 46
+#define R9A07G043_PD_PLIC 47 /* RZ/Five Only */
+#define R9A07G043_PD_IAX45 48 /* RZ/Five Only */
+#define R9A07G043_PD_NCEPLDM 49 /* RZ/Five Only */
+#define R9A07G043_PD_NCEPLMT 50 /* RZ/Five Only */
#endif /* __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/r9a07g044-cpg.h b/dts/upstream/include/dt-bindings/clock/r9a07g044-cpg.h
index 0bb17ff..e209f96 100644
--- a/dts/upstream/include/dt-bindings/clock/r9a07g044-cpg.h
+++ b/dts/upstream/include/dt-bindings/clock/r9a07g044-cpg.h
@@ -217,4 +217,62 @@
#define R9A07G044_ADC_ADRST_N 82
#define R9A07G044_TSU_PRESETN 83
+/* Power domain IDs. */
+#define R9A07G044_PD_ALWAYS_ON 0
+#define R9A07G044_PD_GIC 1
+#define R9A07G044_PD_IA55 2
+#define R9A07G044_PD_MHU 3
+#define R9A07G044_PD_CORESIGHT 4
+#define R9A07G044_PD_SYC 5
+#define R9A07G044_PD_DMAC 6
+#define R9A07G044_PD_GTM0 7
+#define R9A07G044_PD_GTM1 8
+#define R9A07G044_PD_GTM2 9
+#define R9A07G044_PD_MTU 10
+#define R9A07G044_PD_POE3 11
+#define R9A07G044_PD_GPT 12
+#define R9A07G044_PD_POEGA 13
+#define R9A07G044_PD_POEGB 14
+#define R9A07G044_PD_POEGC 15
+#define R9A07G044_PD_POEGD 16
+#define R9A07G044_PD_WDT0 17
+#define R9A07G044_PD_WDT1 18
+#define R9A07G044_PD_SPI 19
+#define R9A07G044_PD_SDHI0 20
+#define R9A07G044_PD_SDHI1 21
+#define R9A07G044_PD_3DGE 22
+#define R9A07G044_PD_ISU 23
+#define R9A07G044_PD_VCPL4 24
+#define R9A07G044_PD_CRU 25
+#define R9A07G044_PD_MIPI_DSI 26
+#define R9A07G044_PD_LCDC 27
+#define R9A07G044_PD_SSI0 28
+#define R9A07G044_PD_SSI1 29
+#define R9A07G044_PD_SSI2 30
+#define R9A07G044_PD_SSI3 31
+#define R9A07G044_PD_SRC 32
+#define R9A07G044_PD_USB0 33
+#define R9A07G044_PD_USB1 34
+#define R9A07G044_PD_USB_PHY 35
+#define R9A07G044_PD_ETHER0 36
+#define R9A07G044_PD_ETHER1 37
+#define R9A07G044_PD_I2C0 38
+#define R9A07G044_PD_I2C1 39
+#define R9A07G044_PD_I2C2 40
+#define R9A07G044_PD_I2C3 41
+#define R9A07G044_PD_SCIF0 42
+#define R9A07G044_PD_SCIF1 43
+#define R9A07G044_PD_SCIF2 44
+#define R9A07G044_PD_SCIF3 45
+#define R9A07G044_PD_SCIF4 46
+#define R9A07G044_PD_SCI0 47
+#define R9A07G044_PD_SCI1 48
+#define R9A07G044_PD_IRDA 49
+#define R9A07G044_PD_RSPI0 50
+#define R9A07G044_PD_RSPI1 51
+#define R9A07G044_PD_RSPI2 52
+#define R9A07G044_PD_CANFD 53
+#define R9A07G044_PD_ADC 54
+#define R9A07G044_PD_TSU 55
+
#endif /* __DT_BINDINGS_CLOCK_R9A07G044_CPG_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/r9a07g054-cpg.h b/dts/upstream/include/dt-bindings/clock/r9a07g054-cpg.h
index 43f4dbd..2c99f89 100644
--- a/dts/upstream/include/dt-bindings/clock/r9a07g054-cpg.h
+++ b/dts/upstream/include/dt-bindings/clock/r9a07g054-cpg.h
@@ -226,4 +226,62 @@
#define R9A07G054_TSU_PRESETN 83
#define R9A07G054_STPAI_ARESETN 84
+/* Power domain IDs. */
+#define R9A07G054_PD_ALWAYS_ON 0
+#define R9A07G054_PD_GIC 1
+#define R9A07G054_PD_IA55 2
+#define R9A07G054_PD_MHU 3
+#define R9A07G054_PD_CORESIGHT 4
+#define R9A07G054_PD_SYC 5
+#define R9A07G054_PD_DMAC 6
+#define R9A07G054_PD_GTM0 7
+#define R9A07G054_PD_GTM1 8
+#define R9A07G054_PD_GTM2 9
+#define R9A07G054_PD_MTU 10
+#define R9A07G054_PD_POE3 11
+#define R9A07G054_PD_GPT 12
+#define R9A07G054_PD_POEGA 13
+#define R9A07G054_PD_POEGB 14
+#define R9A07G054_PD_POEGC 15
+#define R9A07G054_PD_POEGD 16
+#define R9A07G054_PD_WDT0 17
+#define R9A07G054_PD_WDT1 18
+#define R9A07G054_PD_SPI 19
+#define R9A07G054_PD_SDHI0 20
+#define R9A07G054_PD_SDHI1 21
+#define R9A07G054_PD_3DGE 22
+#define R9A07G054_PD_ISU 23
+#define R9A07G054_PD_VCPL4 24
+#define R9A07G054_PD_CRU 25
+#define R9A07G054_PD_MIPI_DSI 26
+#define R9A07G054_PD_LCDC 27
+#define R9A07G054_PD_SSI0 28
+#define R9A07G054_PD_SSI1 29
+#define R9A07G054_PD_SSI2 30
+#define R9A07G054_PD_SSI3 31
+#define R9A07G054_PD_SRC 32
+#define R9A07G054_PD_USB0 33
+#define R9A07G054_PD_USB1 34
+#define R9A07G054_PD_USB_PHY 35
+#define R9A07G054_PD_ETHER0 36
+#define R9A07G054_PD_ETHER1 37
+#define R9A07G054_PD_I2C0 38
+#define R9A07G054_PD_I2C1 39
+#define R9A07G054_PD_I2C2 40
+#define R9A07G054_PD_I2C3 41
+#define R9A07G054_PD_SCIF0 42
+#define R9A07G054_PD_SCIF1 43
+#define R9A07G054_PD_SCIF2 44
+#define R9A07G054_PD_SCIF3 45
+#define R9A07G054_PD_SCIF4 46
+#define R9A07G054_PD_SCI0 47
+#define R9A07G054_PD_SCI1 48
+#define R9A07G054_PD_IRDA 49
+#define R9A07G054_PD_RSPI0 50
+#define R9A07G054_PD_RSPI1 51
+#define R9A07G054_PD_RSPI2 52
+#define R9A07G054_PD_CANFD 53
+#define R9A07G054_PD_ADC 54
+#define R9A07G054_PD_TSU 55
+
#endif /* __DT_BINDINGS_CLOCK_R9A07G054_CPG_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/r9a08g045-cpg.h b/dts/upstream/include/dt-bindings/clock/r9a08g045-cpg.h
index 410725b..8281e9c 100644
--- a/dts/upstream/include/dt-bindings/clock/r9a08g045-cpg.h
+++ b/dts/upstream/include/dt-bindings/clock/r9a08g045-cpg.h
@@ -239,4 +239,74 @@
#define R9A08G045_I3C_PRESETN 92
#define R9A08G045_VBAT_BRESETN 93
+/* Power domain IDs. */
+#define R9A08G045_PD_ALWAYS_ON 0
+#define R9A08G045_PD_GIC 1
+#define R9A08G045_PD_IA55 2
+#define R9A08G045_PD_MHU 3
+#define R9A08G045_PD_CORESIGHT 4
+#define R9A08G045_PD_SYC 5
+#define R9A08G045_PD_DMAC 6
+#define R9A08G045_PD_GTM0 7
+#define R9A08G045_PD_GTM1 8
+#define R9A08G045_PD_GTM2 9
+#define R9A08G045_PD_GTM3 10
+#define R9A08G045_PD_GTM4 11
+#define R9A08G045_PD_GTM5 12
+#define R9A08G045_PD_GTM6 13
+#define R9A08G045_PD_GTM7 14
+#define R9A08G045_PD_MTU 15
+#define R9A08G045_PD_POE3 16
+#define R9A08G045_PD_GPT 17
+#define R9A08G045_PD_POEGA 18
+#define R9A08G045_PD_POEGB 19
+#define R9A08G045_PD_POEGC 20
+#define R9A08G045_PD_POEGD 21
+#define R9A08G045_PD_WDT0 22
+#define R9A08G045_PD_XSPI 23
+#define R9A08G045_PD_SDHI0 24
+#define R9A08G045_PD_SDHI1 25
+#define R9A08G045_PD_SDHI2 26
+#define R9A08G045_PD_SSI0 27
+#define R9A08G045_PD_SSI1 28
+#define R9A08G045_PD_SSI2 29
+#define R9A08G045_PD_SSI3 30
+#define R9A08G045_PD_SRC 31
+#define R9A08G045_PD_USB0 32
+#define R9A08G045_PD_USB1 33
+#define R9A08G045_PD_USB_PHY 34
+#define R9A08G045_PD_ETHER0 35
+#define R9A08G045_PD_ETHER1 36
+#define R9A08G045_PD_I2C0 37
+#define R9A08G045_PD_I2C1 38
+#define R9A08G045_PD_I2C2 39
+#define R9A08G045_PD_I2C3 40
+#define R9A08G045_PD_SCIF0 41
+#define R9A08G045_PD_SCIF1 42
+#define R9A08G045_PD_SCIF2 43
+#define R9A08G045_PD_SCIF3 44
+#define R9A08G045_PD_SCIF4 45
+#define R9A08G045_PD_SCIF5 46
+#define R9A08G045_PD_SCI0 47
+#define R9A08G045_PD_SCI1 48
+#define R9A08G045_PD_IRDA 49
+#define R9A08G045_PD_RSPI0 50
+#define R9A08G045_PD_RSPI1 51
+#define R9A08G045_PD_RSPI2 52
+#define R9A08G045_PD_RSPI3 53
+#define R9A08G045_PD_RSPI4 54
+#define R9A08G045_PD_CANFD 55
+#define R9A08G045_PD_ADC 56
+#define R9A08G045_PD_TSU 57
+#define R9A08G045_PD_OCTA 58
+#define R9A08G045_PD_PDM 59
+#define R9A08G045_PD_PCI 60
+#define R9A08G045_PD_SPDIF 61
+#define R9A08G045_PD_I3C 62
+#define R9A08G045_PD_VBAT 63
+
+#define R9A08G045_PD_DDR 64
+#define R9A08G045_PD_TZCDDR 65
+#define R9A08G045_PD_OTFDE_DDR 66
+
#endif /* __DT_BINDINGS_CLOCK_R9A08G045_CPG_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/rk3568-cru.h b/dts/upstream/include/dt-bindings/clock/rk3568-cru.h
index d298908..5263085 100644
--- a/dts/upstream/include/dt-bindings/clock/rk3568-cru.h
+++ b/dts/upstream/include/dt-bindings/clock/rk3568-cru.h
@@ -78,6 +78,7 @@
#define CPLL_333M 9
#define ARMCLK 10
#define USB480M 11
+#define USB480M_PHY 12
#define ACLK_CORE_NIU2BUS 18
#define CLK_CORE_PVTM 19
#define CLK_CORE_PVTM_CORE 20
diff --git a/dts/upstream/include/dt-bindings/input/linux-event-codes.h b/dts/upstream/include/dt-bindings/input/linux-event-codes.h
index 03edf2c..a420672 100644
--- a/dts/upstream/include/dt-bindings/input/linux-event-codes.h
+++ b/dts/upstream/include/dt-bindings/input/linux-event-codes.h
@@ -618,6 +618,8 @@
#define KEY_CAMERA_ACCESS_ENABLE 0x24b /* Enables programmatic access to camera devices. (HUTRR72) */
#define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access to camera devices. (HUTRR72) */
#define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of the camera access control. (HUTRR72) */
+#define KEY_ACCESSIBILITY 0x24e /* Toggles the system bound accessibility UI/command (HUTRR116) */
+#define KEY_DO_NOT_DISTURB 0x24f /* Toggles the system-wide "Do Not Disturb" control (HUTRR94)*/
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
diff --git a/dts/upstream/include/dt-bindings/leds/common.h b/dts/upstream/include/dt-bindings/leds/common.h
index ecea167..4f017be 100644
--- a/dts/upstream/include/dt-bindings/leds/common.h
+++ b/dts/upstream/include/dt-bindings/leds/common.h
@@ -46,6 +46,7 @@
#define LED_FUNCTION_CAPSLOCK "capslock"
#define LED_FUNCTION_SCROLLLOCK "scrolllock"
#define LED_FUNCTION_NUMLOCK "numlock"
+#define LED_FUNCTION_FNLOCK "fnlock"
/* Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads),
"lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */
#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight"
@@ -90,11 +91,14 @@
#define LED_FUNCTION_INDICATOR "indicator"
#define LED_FUNCTION_LAN "lan"
#define LED_FUNCTION_MAIL "mail"
+#define LED_FUNCTION_MOBILE "mobile"
#define LED_FUNCTION_MTD "mtd"
#define LED_FUNCTION_PANIC "panic"
#define LED_FUNCTION_PROGRAMMING "programming"
#define LED_FUNCTION_RX "rx"
#define LED_FUNCTION_SD "sd"
+#define LED_FUNCTION_SPEED_LAN "speed-lan"
+#define LED_FUNCTION_SPEED_WAN "speed-wan"
#define LED_FUNCTION_STANDBY "standby"
#define LED_FUNCTION_TORCH "torch"
#define LED_FUNCTION_TX "tx"
diff --git a/dts/upstream/include/dt-bindings/net/ti-dp83867.h b/dts/upstream/include/dt-bindings/net/ti-dp83867.h
index 6fc4b44..b8a4f3f 100644
--- a/dts/upstream/include/dt-bindings/net/ti-dp83867.h
+++ b/dts/upstream/include/dt-bindings/net/ti-dp83867.h
@@ -1,10 +1,10 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
/*
* Device Tree constants for the Texas Instruments DP83867 PHY
*
* Author: Dan Murphy <dmurphy@ti.com>
*
- * Copyright: (C) 2015 Texas Instruments, Inc.
+ * Copyright (C) 2015-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef _DT_BINDINGS_TI_DP83867_H
diff --git a/dts/upstream/include/dt-bindings/net/ti-dp83869.h b/dts/upstream/include/dt-bindings/net/ti-dp83869.h
index 218b1a6..917114a 100644
--- a/dts/upstream/include/dt-bindings/net/ti-dp83869.h
+++ b/dts/upstream/include/dt-bindings/net/ti-dp83869.h
@@ -1,10 +1,10 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
/*
* Device Tree constants for the Texas Instruments DP83869 PHY
*
* Author: Dan Murphy <dmurphy@ti.com>
*
- * Copyright: (C) 2019 Texas Instruments, Inc.
+ * Copyright (C) 2015-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef _DT_BINDINGS_TI_DP83869_H
diff --git a/dts/upstream/include/dt-bindings/phy/phy-qcom-qmp.h b/dts/upstream/include/dt-bindings/phy/phy-qcom-qmp.h
index 4edec4c..6b43ea9 100644
--- a/dts/upstream/include/dt-bindings/phy/phy-qcom-qmp.h
+++ b/dts/upstream/include/dt-bindings/phy/phy-qcom-qmp.h
@@ -17,4 +17,8 @@
#define QMP_USB43DP_USB3_PHY 0
#define QMP_USB43DP_DP_PHY 1
+/* QMP PCIE PHYs */
+#define QMP_PCIE_PIPE_CLK 0
+#define QMP_PCIE_PHY_AUX_CLK 1
+
#endif /* _DT_BINDINGS_PHY_QMP */
diff --git a/dts/upstream/include/dt-bindings/pinctrl/samsung.h b/dts/upstream/include/dt-bindings/pinctrl/samsung.h
deleted file mode 100644
index d1da5ff..0000000
--- a/dts/upstream/include/dt-bindings/pinctrl/samsung.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Samsung's Exynos pinctrl bindings
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- * Author: Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#ifndef __DT_BINDINGS_PINCTRL_SAMSUNG_H__
-#define __DT_BINDINGS_PINCTRL_SAMSUNG_H__
-
-/*
- * These bindings are deprecated, because they do not match the actual
- * concept of bindings but rather contain pure register values.
- * Instead include the header in the DTS source directory.
- */
-#warning "These bindings are deprecated. Instead use the header in the DTS source directory."
-
-#define EXYNOS_PIN_PULL_NONE 0
-#define EXYNOS_PIN_PULL_DOWN 1
-#define EXYNOS_PIN_PULL_UP 3
-
-#define S3C64XX_PIN_PULL_NONE 0
-#define S3C64XX_PIN_PULL_DOWN 1
-#define S3C64XX_PIN_PULL_UP 2
-
-/* Pin function in power down mode */
-#define EXYNOS_PIN_PDN_OUT0 0
-#define EXYNOS_PIN_PDN_OUT1 1
-#define EXYNOS_PIN_PDN_INPUT 2
-#define EXYNOS_PIN_PDN_PREV 3
-
-/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */
-#define EXYNOS4_PIN_DRV_LV1 0
-#define EXYNOS4_PIN_DRV_LV2 2
-#define EXYNOS4_PIN_DRV_LV3 1
-#define EXYNOS4_PIN_DRV_LV4 3
-
-/* Drive strengths for Exynos5260 */
-#define EXYNOS5260_PIN_DRV_LV1 0
-#define EXYNOS5260_PIN_DRV_LV2 1
-#define EXYNOS5260_PIN_DRV_LV4 2
-#define EXYNOS5260_PIN_DRV_LV6 3
-
-/*
- * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except
- * GPIO_HSI block)
- */
-#define EXYNOS5420_PIN_DRV_LV1 0
-#define EXYNOS5420_PIN_DRV_LV2 1
-#define EXYNOS5420_PIN_DRV_LV3 2
-#define EXYNOS5420_PIN_DRV_LV4 3
-
-/* Drive strengths for Exynos5433 */
-#define EXYNOS5433_PIN_DRV_FAST_SR1 0
-#define EXYNOS5433_PIN_DRV_FAST_SR2 1
-#define EXYNOS5433_PIN_DRV_FAST_SR3 2
-#define EXYNOS5433_PIN_DRV_FAST_SR4 3
-#define EXYNOS5433_PIN_DRV_FAST_SR5 4
-#define EXYNOS5433_PIN_DRV_FAST_SR6 5
-#define EXYNOS5433_PIN_DRV_SLOW_SR1 8
-#define EXYNOS5433_PIN_DRV_SLOW_SR2 9
-#define EXYNOS5433_PIN_DRV_SLOW_SR3 0xa
-#define EXYNOS5433_PIN_DRV_SLOW_SR4 0xb
-#define EXYNOS5433_PIN_DRV_SLOW_SR5 0xc
-#define EXYNOS5433_PIN_DRV_SLOW_SR6 0xf
-
-/* Drive strengths for Exynos850 GPIO_HSI block */
-#define EXYNOS850_HSI_PIN_DRV_LV1 0 /* 1x */
-#define EXYNOS850_HSI_PIN_DRV_LV1_5 1 /* 1.5x */
-#define EXYNOS850_HSI_PIN_DRV_LV2 2 /* 2x */
-#define EXYNOS850_HSI_PIN_DRV_LV2_5 3 /* 2.5x */
-#define EXYNOS850_HSI_PIN_DRV_LV3 4 /* 3x */
-#define EXYNOS850_HSI_PIN_DRV_LV4 5 /* 4x */
-
-#define EXYNOS_PIN_FUNC_INPUT 0
-#define EXYNOS_PIN_FUNC_OUTPUT 1
-#define EXYNOS_PIN_FUNC_2 2
-#define EXYNOS_PIN_FUNC_3 3
-#define EXYNOS_PIN_FUNC_4 4
-#define EXYNOS_PIN_FUNC_5 5
-#define EXYNOS_PIN_FUNC_6 6
-#define EXYNOS_PIN_FUNC_EINT 0xf
-#define EXYNOS_PIN_FUNC_F EXYNOS_PIN_FUNC_EINT
-
-/* Drive strengths for Exynos7 FSYS1 block */
-#define EXYNOS7_FSYS1_PIN_DRV_LV1 0
-#define EXYNOS7_FSYS1_PIN_DRV_LV2 4
-#define EXYNOS7_FSYS1_PIN_DRV_LV3 2
-#define EXYNOS7_FSYS1_PIN_DRV_LV4 6
-#define EXYNOS7_FSYS1_PIN_DRV_LV5 1
-#define EXYNOS7_FSYS1_PIN_DRV_LV6 5
-
-#endif /* __DT_BINDINGS_PINCTRL_SAMSUNG_H__ */
diff --git a/dts/upstream/include/dt-bindings/reset/rockchip,rk3588-cru.h b/dts/upstream/include/dt-bindings/reset/rockchip,rk3588-cru.h
index d4264db..e2fe4bd 100644
--- a/dts/upstream/include/dt-bindings/reset/rockchip,rk3588-cru.h
+++ b/dts/upstream/include/dt-bindings/reset/rockchip,rk3588-cru.h
@@ -751,4 +751,6 @@
#define SRST_P_TRNG_CHK 658
#define SRST_TRNG_S 659
+#define SRST_A_HDMIRX_BIU 660
+
#endif
diff --git a/dts/upstream/include/dt-bindings/reset/st,stm32mp25-rcc.h b/dts/upstream/include/dt-bindings/reset/st,stm32mp25-rcc.h
index d561593..748e78a 100644
--- a/dts/upstream/include/dt-bindings/reset/st,stm32mp25-rcc.h
+++ b/dts/upstream/include/dt-bindings/reset/st,stm32mp25-rcc.h
@@ -69,7 +69,7 @@
#define ADC3_R 59
#define ETH1_R 60
#define ETH2_R 61
-#define USB2_R 62
+#define USBH_R 62
#define USB2PHY1_R 63
#define USB2PHY2_R 64
#define USB3DR_R 65
diff --git a/dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index 997e2f5..bf95309 100644
--- a/dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -16,6 +16,32 @@
#define MT7988_ETHWARP_0 6
#define MT7988_ETHWARP_1 7
+#define MT8186_LITTLE_CPU0 0
+#define MT8186_LITTLE_CPU1 1
+#define MT8186_LITTLE_CPU2 2
+#define MT8186_CAM 3
+#define MT8186_BIG_CPU0 4
+#define MT8186_BIG_CPU1 5
+#define MT8186_NNA 6
+#define MT8186_ADSP 7
+#define MT8186_MFG 8
+
+#define MT8188_MCU_LITTLE_CPU0 0
+#define MT8188_MCU_LITTLE_CPU1 1
+#define MT8188_MCU_LITTLE_CPU2 2
+#define MT8188_MCU_LITTLE_CPU3 3
+#define MT8188_MCU_BIG_CPU0 4
+#define MT8188_MCU_BIG_CPU1 5
+
+#define MT8188_AP_APU 0
+#define MT8188_AP_GPU1 1
+#define MT8188_AP_GPU2 2
+#define MT8188_AP_SOC1 3
+#define MT8188_AP_SOC2 4
+#define MT8188_AP_SOC3 5
+#define MT8188_AP_CAM1 6
+#define MT8188_AP_CAM2 7
+
#define MT8195_MCU_BIG_CPU0 0
#define MT8195_MCU_BIG_CPU1 1
#define MT8195_MCU_BIG_CPU2 2
diff --git a/dts/upstream/scripts/cronjob b/dts/upstream/scripts/cronjob
index f01166b..6cc1373 100755
--- a/dts/upstream/scripts/cronjob
+++ b/dts/upstream/scripts/cronjob
@@ -6,7 +6,7 @@ cd $(dirname $0)/..
UPSTREAM_GIT="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
-BRANCHES="master filter-state upstream/master upstream/dts"
+BRANCHES="master filter-state-split upstream/master upstream/dts"
if [ ! -f scripts/filter.sh ] ; then
echo "`pwd`: does not appear to be a device-tree.git" 1>&2
@@ -75,7 +75,7 @@ echo "Filtering"
echo
) 2>&1 `
-#git push --dry-run origin filter-state upstream/dts upstream/master
+#git push --dry-run origin filter-state-split upstream/dts upstream/master
#git push --dry-run origin --tags
#echo
diff --git a/dts/upstream/scripts/filter.sh b/dts/upstream/scripts/filter.sh
index 5e10ff4..998b8f0 100755
--- a/dts/upstream/scripts/filter.sh
+++ b/dts/upstream/scripts/filter.sh
@@ -1,6 +1,6 @@
#!/bin/sh
-# git branch -D upstream/rewritten-prev upstream/master upstream/rewritten filter-state
+# git branch -D upstream/rewritten-prev upstream/master upstream/rewritten filter-state-split
set -e
@@ -29,12 +29,12 @@ rm -f .git/refs/original/refs/heads/${UPSTREAM_REWRITTEN}
git branch -f $UPSTREAM_REWRITTEN FETCH_HEAD
-git filter-branch --force \
+PATH=$(git --exec-path):$PATH $SCRIPTS/git-filter-branch --force \
--index-filter ${SCRIPTS}/index-filter.sh \
--msg-filter 'cat && /bin/echo -e "\n[ upstream commit: $GIT_COMMIT ]"' \
--tag-name-filter 'while read t ; do /bin/echo -n $t-dts-raw ; done' \
--parent-filter 'sed "s/-p //g" | xargs -r git show-branch --independent | sed "s/\</-p /g"' \
- --prune-empty --state-branch refs/heads/filter-state \
+ --prune-empty --state-branch refs/heads/filter-state-split \
-- $RANGE
git branch -f $UPSTREAM_MASTER FETCH_HEAD
diff --git a/dts/upstream/scripts/git-filter-branch b/dts/upstream/scripts/git-filter-branch
new file mode 100755
index 0000000..690497c
--- /dev/null
+++ b/dts/upstream/scripts/git-filter-branch
@@ -0,0 +1,673 @@
+#!/bin/sh
+#
+# Rewrite revision history
+# Copyright (c) Petr Baudis, 2006
+# Minimal changes to "port" it to core-git (c) Johannes Schindelin, 2007
+#
+# Lets you rewrite the revision history of the current branch, creating
+# a new branch. You can specify a number of filters to modify the commits,
+# files and trees.
+
+# The following functions will also be available in the commit filter:
+
+functions=$(cat << \EOF
+EMPTY_TREE=$(git hash-object -t tree /dev/null)
+
+warn () {
+ echo "$*" >&2
+}
+
+map()
+{
+ # if it was not rewritten, take the original
+ if test -r "$workdir/../map/$1"
+ then
+ cat "$workdir/../map/$1"
+ else
+ echo "$1"
+ fi
+}
+
+# if you run 'skip_commit "$@"' in a commit filter, it will print
+# the (mapped) parents, effectively skipping the commit.
+
+skip_commit()
+{
+ shift;
+ while [ -n "$1" ];
+ do
+ shift;
+ map "$1";
+ shift;
+ done;
+}
+
+# if you run 'git_commit_non_empty_tree "$@"' in a commit filter,
+# it will skip commits that leave the tree untouched, commit the other.
+git_commit_non_empty_tree()
+{
+ if test $# = 3 && test "$1" = $(git rev-parse "$3^{tree}"); then
+ map "$3"
+ elif test $# = 1 && test "$1" = $EMPTY_TREE; then
+ :
+ else
+ git commit-tree "$@"
+ fi
+}
+# override die(): this version puts in an extra line break, so that
+# the progress is still visible
+
+die()
+{
+ echo >&2
+ echo "$*" >&2
+ exit 1
+}
+EOF
+)
+
+eval "$functions"
+
+finish_ident() {
+ # Ensure non-empty id name.
+ echo "case \"\$GIT_$1_NAME\" in \"\") GIT_$1_NAME=\"\${GIT_$1_EMAIL%%@*}\" && export GIT_$1_NAME;; esac"
+ # And make sure everything is exported.
+ echo "export GIT_$1_NAME"
+ echo "export GIT_$1_EMAIL"
+ echo "export GIT_$1_DATE"
+}
+
+set_ident () {
+ parse_ident_from_commit author AUTHOR committer COMMITTER
+ finish_ident AUTHOR
+ finish_ident COMMITTER
+}
+
+if test -z "$FILTER_BRANCH_SQUELCH_WARNING$GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS"
+then
+ cat <<EOF
+WARNING: git-filter-branch has a glut of gotchas generating mangled history
+ rewrites. Hit Ctrl-C before proceeding to abort, then use an
+ alternative filtering tool such as 'git filter-repo'
+ (https://github.com/newren/git-filter-repo/) instead. See the
+ filter-branch manual page for more details; to squelch this warning,
+ set FILTER_BRANCH_SQUELCH_WARNING=1.
+EOF
+ sleep 10
+ printf "Proceeding with filter-branch...\n\n"
+fi
+
+USAGE="[--setup <command>] [--subdirectory-filter <directory>] [--env-filter <command>]
+ [--tree-filter <command>] [--index-filter <command>]
+ [--parent-filter <command>] [--msg-filter <command>]
+ [--commit-filter <command>] [--tag-name-filter <command>]
+ [--original <namespace>]
+ [-d <directory>] [-f | --force] [--state-branch <branch>]
+ [--] [<rev-list options>...]"
+
+OPTIONS_SPEC=
+. git-sh-setup
+
+if [ "$(is_bare_repository)" = false ]; then
+ require_clean_work_tree 'rewrite branches'
+fi
+
+tempdir=.git-rewrite
+filter_setup=
+filter_env=
+filter_tree=
+filter_index=
+filter_parent=
+filter_msg=cat
+filter_commit=
+filter_tag_name=
+filter_subdir=
+state_branch=
+orig_namespace=refs/original/
+force=
+prune_empty=
+remap_to_ancestor=
+while :
+do
+ case "$1" in
+ --)
+ shift
+ break
+ ;;
+ --force|-f)
+ shift
+ force=t
+ continue
+ ;;
+ --remap-to-ancestor)
+ # deprecated ($remap_to_ancestor is set now automatically)
+ shift
+ remap_to_ancestor=t
+ continue
+ ;;
+ --prune-empty)
+ shift
+ prune_empty=t
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ break;
+ esac
+
+ # all switches take one argument
+ ARG="$1"
+ case "$#" in 1) usage ;; esac
+ shift
+ OPTARG="$1"
+ shift
+
+ case "$ARG" in
+ -d)
+ tempdir="$OPTARG"
+ ;;
+ --setup)
+ filter_setup="$OPTARG"
+ ;;
+ --subdirectory-filter)
+ filter_subdir="$OPTARG"
+ remap_to_ancestor=t
+ ;;
+ --env-filter)
+ filter_env="$OPTARG"
+ ;;
+ --tree-filter)
+ filter_tree="$OPTARG"
+ ;;
+ --index-filter)
+ filter_index="$OPTARG"
+ ;;
+ --parent-filter)
+ filter_parent="$OPTARG"
+ ;;
+ --msg-filter)
+ filter_msg="$OPTARG"
+ ;;
+ --commit-filter)
+ filter_commit="$functions; $OPTARG"
+ ;;
+ --tag-name-filter)
+ filter_tag_name="$OPTARG"
+ ;;
+ --original)
+ orig_namespace=$(expr "$OPTARG/" : '\(.*[^/]\)/*$')/
+ ;;
+ --state-branch)
+ state_branch="$OPTARG"
+ ;;
+ *)
+ usage
+ ;;
+ esac
+done
+
+case "$prune_empty,$filter_commit" in
+,)
+ filter_commit='git commit-tree "$@"';;
+t,)
+ filter_commit="$functions;"' git_commit_non_empty_tree "$@"';;
+,*)
+ ;;
+*)
+ die "Cannot set --prune-empty and --commit-filter at the same time"
+esac
+
+case "$force" in
+t)
+ rm -rf "$tempdir"
+;;
+'')
+ test -d "$tempdir" &&
+ die "$tempdir already exists, please remove it"
+esac
+orig_dir=$(pwd)
+mkdir -p "$tempdir/t" &&
+tempdir="$(cd "$tempdir"; pwd)" &&
+cd "$tempdir/t" &&
+workdir="$(pwd)" ||
+die ""
+
+# Remove tempdir on exit
+trap 'cd "$orig_dir"; rm -rf "$tempdir"' 0
+
+ORIG_GIT_DIR="$GIT_DIR"
+ORIG_GIT_WORK_TREE="$GIT_WORK_TREE"
+ORIG_GIT_INDEX_FILE="$GIT_INDEX_FILE"
+ORIG_GIT_AUTHOR_NAME="$GIT_AUTHOR_NAME"
+ORIG_GIT_AUTHOR_EMAIL="$GIT_AUTHOR_EMAIL"
+ORIG_GIT_AUTHOR_DATE="$GIT_AUTHOR_DATE"
+ORIG_GIT_COMMITTER_NAME="$GIT_COMMITTER_NAME"
+ORIG_GIT_COMMITTER_EMAIL="$GIT_COMMITTER_EMAIL"
+ORIG_GIT_COMMITTER_DATE="$GIT_COMMITTER_DATE"
+
+GIT_WORK_TREE=.
+export GIT_DIR GIT_WORK_TREE
+
+# Make sure refs/original is empty
+git for-each-ref > "$tempdir"/backup-refs || exit
+while read sha1 type name
+do
+ case "$force,$name" in
+ ,$orig_namespace*)
+ die "Cannot create a new backup.
+A previous backup already exists in $orig_namespace
+Force overwriting the backup with -f"
+ ;;
+ t,$orig_namespace*)
+ git update-ref -d "$name" $sha1
+ ;;
+ esac
+done < "$tempdir"/backup-refs
+
+# The refs should be updated if their heads were rewritten
+git rev-parse --no-flags --revs-only --symbolic-full-name \
+ --default HEAD "$@" > "$tempdir"/raw-refs || exit
+while read ref
+do
+ case "$ref" in ^?*) continue ;; esac
+
+ if git rev-parse --verify "$ref"^0 >/dev/null 2>&1
+ then
+ echo "$ref"
+ else
+ warn "WARNING: not rewriting '$ref' (not a committish)"
+ fi
+done >"$tempdir"/heads <"$tempdir"/raw-refs
+
+test -s "$tempdir"/heads ||
+ die "You must specify a ref to rewrite."
+
+GIT_INDEX_FILE="$(pwd)/../index"
+export GIT_INDEX_FILE
+
+# map old->new commit ids for rewriting parents
+mkdir ../map || die "Could not create map/ directory"
+
+state_prefixes="0 1 2 3 4 5 6 7 8 9 a b c d e f"
+
+if test -n "$state_branch"
+then
+ state_commit=$(git rev-parse --no-flags --revs-only "$state_branch")
+ if test -n "$state_commit"
+ then
+ echo "Populating map from $state_branch ($state_commit)" 1>&2
+ for prefix in $state_prefixes ; do
+ perl -e'open(MAP, "-|", "git show $ARGV[0]:$ARGV[1]") or die;
+ while (<MAP>) {
+ m/(.*):(.*)/ or die;
+ open F, ">../map/$1" or die;
+ print F "$2" or die;
+ close(F) or die;
+ }
+ close(MAP) or die;' "$state_commit" "filter_${prefix}.map" \
+ || die "Unable to load state from $state_branch:filter_${prefix}.map"
+ done
+ else
+ echo "Branch $state_branch does not exist. Will create" 1>&2
+ fi
+fi
+
+# we need "--" only if there are no path arguments in $@
+nonrevs=$(git rev-parse --no-revs "$@") || exit
+if test -z "$nonrevs"
+then
+ dashdash=--
+else
+ dashdash=
+ remap_to_ancestor=t
+fi
+
+git rev-parse --revs-only "$@" >../parse
+
+case "$filter_subdir" in
+"")
+ eval set -- "$(git rev-parse --sq --no-revs "$@")"
+ ;;
+*)
+ eval set -- "$(git rev-parse --sq --no-revs "$@" $dashdash \
+ "$filter_subdir")"
+ ;;
+esac
+
+git rev-list --reverse --topo-order --default HEAD \
+ --parents --simplify-merges --stdin "$@" <../parse >../revs ||
+ die "Could not get the commits"
+commits=$(wc -l <../revs | tr -d " ")
+
+test $commits -eq 0 && die_with_status 2 "Found nothing to rewrite"
+
+# Rewrite the commits
+report_progress ()
+{
+ if test -n "$progress" &&
+ test $git_filter_branch__commit_count -gt $next_sample_at
+ then
+ count=$git_filter_branch__commit_count
+
+ now=$(date +%s)
+ elapsed=$(($now - $start_timestamp))
+ remaining=$(( ($commits - $count) * $elapsed / $count ))
+ if test $elapsed -gt 0
+ then
+ next_sample_at=$(( ($elapsed + 1) * $count / $elapsed ))
+ else
+ next_sample_at=$(($next_sample_at + 1))
+ fi
+ progress=" ($elapsed seconds passed, remaining $remaining predicted)"
+ fi
+ printf "\rRewrite $commit ($count/$commits)$progress "
+}
+
+git_filter_branch__commit_count=0
+
+progress= start_timestamp=
+if date '+%s' 2>/dev/null | grep -q '^[0-9][0-9]*$'
+then
+ next_sample_at=0
+ progress="dummy to ensure this is not empty"
+ start_timestamp=$(date '+%s')
+fi
+
+if test -n "$filter_index" ||
+ test -n "$filter_tree" ||
+ test -n "$filter_subdir"
+then
+ need_index=t
+else
+ need_index=
+fi
+
+eval "$filter_setup" < /dev/null ||
+ die "filter setup failed: $filter_setup"
+
+while read commit parents; do
+ git_filter_branch__commit_count=$(($git_filter_branch__commit_count+1))
+
+ report_progress
+ test -f "$workdir"/../map/$commit && continue
+
+ case "$filter_subdir" in
+ "")
+ if test -n "$need_index"
+ then
+ GIT_ALLOW_NULL_SHA1=1 git read-tree -i -m $commit
+ fi
+ ;;
+ *)
+ # The commit may not have the subdirectory at all
+ err=$(GIT_ALLOW_NULL_SHA1=1 \
+ git read-tree -i -m $commit:"$filter_subdir" 2>&1) || {
+ if ! git rev-parse -q --verify $commit:"$filter_subdir"
+ then
+ rm -f "$GIT_INDEX_FILE"
+ else
+ echo >&2 "$err"
+ false
+ fi
+ }
+ esac || die "Could not initialize the index"
+
+ GIT_COMMIT=$commit
+ export GIT_COMMIT
+ git cat-file commit "$commit" >../commit ||
+ die "Cannot read commit $commit"
+
+ eval "$(set_ident <../commit)" ||
+ die "setting author/committer failed for commit $commit"
+ eval "$filter_env" < /dev/null ||
+ die "env filter failed: $filter_env"
+
+ if [ "$filter_tree" ]; then
+ git checkout-index -f -u -a ||
+ die "Could not checkout the index"
+ # files that $commit removed are now still in the working tree;
+ # remove them, else they would be added again
+ git clean -d -q -f -x
+ eval "$filter_tree" < /dev/null ||
+ die "tree filter failed: $filter_tree"
+
+ (
+ git diff-index -r --name-only --ignore-submodules $commit -- &&
+ git ls-files --others
+ ) > "$tempdir"/tree-state || exit
+ git update-index --add --replace --remove --stdin \
+ < "$tempdir"/tree-state || exit
+ fi
+
+ eval "$filter_index" < /dev/null ||
+ die "index filter failed: $filter_index"
+
+ parentstr=
+ for parent in $parents; do
+ for reparent in $(map "$parent"); do
+ case "$parentstr " in
+ *" -p $reparent "*)
+ ;;
+ *)
+ parentstr="$parentstr -p $reparent"
+ ;;
+ esac
+ done
+ done
+ if [ "$filter_parent" ]; then
+ parentstr="$(echo "$parentstr" | eval "$filter_parent")" ||
+ die "parent filter failed: $filter_parent"
+ fi
+
+ {
+ while IFS='' read -r header_line && test -n "$header_line"
+ do
+ # skip header lines...
+ :;
+ done
+ # and output the actual commit message
+ cat
+ } <../commit |
+ eval "$filter_msg" > ../message ||
+ die "msg filter failed: $filter_msg"
+
+ if test -n "$need_index"
+ then
+ tree=$(git write-tree)
+ else
+ tree=$(git rev-parse "$commit^{tree}")
+ fi
+ workdir=$workdir /bin/sh -c "$filter_commit" "git commit-tree" \
+ "$tree" $parentstr < ../message > ../map/$commit ||
+ die "could not write rewritten commit"
+done <../revs
+
+# If we are filtering for paths, as in the case of a subdirectory
+# filter, it is possible that a specified head is not in the set of
+# rewritten commits, because it was pruned by the revision walker.
+# Ancestor remapping fixes this by mapping these heads to the unique
+# nearest ancestor that survived the pruning.
+
+if test "$remap_to_ancestor" = t
+then
+ while read ref
+ do
+ sha1=$(git rev-parse "$ref"^0)
+ test -f "$workdir"/../map/$sha1 && continue
+ ancestor=$(git rev-list --simplify-merges -1 "$ref" "$@")
+ test "$ancestor" && echo $(map $ancestor) >"$workdir"/../map/$sha1
+ done < "$tempdir"/heads
+fi
+
+# Finally update the refs
+
+echo
+while read ref
+do
+ # avoid rewriting a ref twice
+ test -f "$orig_namespace$ref" && continue
+
+ sha1=$(git rev-parse "$ref"^0)
+ rewritten=$(map $sha1)
+
+ test $sha1 = "$rewritten" &&
+ warn "WARNING: Ref '$ref' is unchanged" &&
+ continue
+
+ case "$rewritten" in
+ '')
+ echo "Ref '$ref' was deleted"
+ git update-ref -m "filter-branch: delete" -d "$ref" $sha1 ||
+ die "Could not delete $ref"
+ ;;
+ *)
+ echo "Ref '$ref' was rewritten"
+ if ! git update-ref -m "filter-branch: rewrite" \
+ "$ref" $rewritten $sha1 2>/dev/null; then
+ if test $(git cat-file -t "$ref") = tag; then
+ if test -z "$filter_tag_name"; then
+ warn "WARNING: You said to rewrite tagged commits, but not the corresponding tag."
+ warn "WARNING: Perhaps use '--tag-name-filter cat' to rewrite the tag."
+ fi
+ else
+ die "Could not rewrite $ref"
+ fi
+ fi
+ ;;
+ esac
+ git update-ref -m "filter-branch: backup" "$orig_namespace$ref" $sha1 ||
+ exit
+done < "$tempdir"/heads
+
+# TODO: This should possibly go, with the semantics that all positive given
+# refs are updated, and their original heads stored in refs/original/
+# Filter tags
+
+if [ "$filter_tag_name" ]; then
+ git for-each-ref --format='%(objectname) %(objecttype) %(refname)' refs/tags |
+ while read sha1 type ref; do
+ ref="${ref#refs/tags/}"
+ # XXX: Rewrite tagged trees as well?
+ if [ "$type" != "commit" -a "$type" != "tag" ]; then
+ continue;
+ fi
+
+ if [ "$type" = "tag" ]; then
+ # Dereference to a commit
+ sha1t="$sha1"
+ sha1="$(git rev-parse -q "$sha1"^{commit})" || continue
+ fi
+
+ [ -f "../map/$sha1" ] || continue
+ new_sha1="$(cat "../map/$sha1")"
+ GIT_COMMIT="$sha1"
+ export GIT_COMMIT
+ new_ref="$(echo "$ref" | eval "$filter_tag_name")" ||
+ die "tag name filter failed: $filter_tag_name"
+
+ echo "$ref -> $new_ref ($sha1 -> $new_sha1)"
+
+ if [ "$type" = "tag" ]; then
+ new_sha1=$( ( printf 'object %s\ntype commit\ntag %s\n' \
+ "$new_sha1" "$new_ref"
+ git cat-file tag "$ref" |
+ sed -n \
+ -e '1,/^$/{
+ /^object /d
+ /^type /d
+ /^tag /d
+ }' \
+ -e '/^-----BEGIN PGP SIGNATURE-----/q' \
+ -e 'p' ) |
+ git hash-object -t tag -w --stdin) ||
+ die "Could not create new tag object for $ref"
+ if git cat-file tag "$ref" | \
+ grep '^-----BEGIN PGP SIGNATURE-----' >/dev/null 2>&1
+ then
+ warn "gpg signature stripped from tag object $sha1t"
+ fi
+ fi
+
+ git update-ref "refs/tags/$new_ref" "$new_sha1" ||
+ die "Could not write tag $new_ref"
+ done
+fi
+
+unset GIT_DIR GIT_WORK_TREE GIT_INDEX_FILE
+unset GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL GIT_AUTHOR_DATE
+unset GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL GIT_COMMITTER_DATE
+test -z "$ORIG_GIT_DIR" || {
+ GIT_DIR="$ORIG_GIT_DIR" && export GIT_DIR
+}
+test -z "$ORIG_GIT_WORK_TREE" || {
+ GIT_WORK_TREE="$ORIG_GIT_WORK_TREE" &&
+ export GIT_WORK_TREE
+}
+test -z "$ORIG_GIT_INDEX_FILE" || {
+ GIT_INDEX_FILE="$ORIG_GIT_INDEX_FILE" &&
+ export GIT_INDEX_FILE
+}
+test -z "$ORIG_GIT_AUTHOR_NAME" || {
+ GIT_AUTHOR_NAME="$ORIG_GIT_AUTHOR_NAME" &&
+ export GIT_AUTHOR_NAME
+}
+test -z "$ORIG_GIT_AUTHOR_EMAIL" || {
+ GIT_AUTHOR_EMAIL="$ORIG_GIT_AUTHOR_EMAIL" &&
+ export GIT_AUTHOR_EMAIL
+}
+test -z "$ORIG_GIT_AUTHOR_DATE" || {
+ GIT_AUTHOR_DATE="$ORIG_GIT_AUTHOR_DATE" &&
+ export GIT_AUTHOR_DATE
+}
+test -z "$ORIG_GIT_COMMITTER_NAME" || {
+ GIT_COMMITTER_NAME="$ORIG_GIT_COMMITTER_NAME" &&
+ export GIT_COMMITTER_NAME
+}
+test -z "$ORIG_GIT_COMMITTER_EMAIL" || {
+ GIT_COMMITTER_EMAIL="$ORIG_GIT_COMMITTER_EMAIL" &&
+ export GIT_COMMITTER_EMAIL
+}
+test -z "$ORIG_GIT_COMMITTER_DATE" || {
+ GIT_COMMITTER_DATE="$ORIG_GIT_COMMITTER_DATE" &&
+ export GIT_COMMITTER_DATE
+}
+
+if test -n "$state_branch"
+then
+ echo "Saving rewrite state to $state_branch" 1>&2
+ for prefix in $state_prefixes ; do
+ state_blob=$(
+ perl -e'opendir D, "../map" or die;
+ open H, "|-", "git hash-object -w --stdin" or die;
+ foreach (sort readdir(D)) {
+ next if m/^\.\.?$/;
+ next unless m/^$ARGV[0]/;
+ open F, "<../map/$_" or die;
+ chomp($f = <F>);
+ print H "$_:$f\n" or die;
+ }
+ close(H) or die;' "$prefix" || die "Unable to save state")
+ printf '100644 blob %s\tfilter_%s.map\n' "$state_blob" "$prefix" >> $tempdir/state-branch-tree
+ done
+ state_tree=$(cat $tempdir/state-branch-tree | git mktree)
+
+ if test -n "$state_commit"
+ then
+ state_commit=$(echo "Sync" | git commit-tree "$state_tree" -p "$state_commit")
+ else
+ state_commit=$(echo "Sync" | git commit-tree "$state_tree" )
+ fi
+ git update-ref "$state_branch" "$state_commit"
+fi
+
+cd "$orig_dir"
+rm -rf "$tempdir"
+
+trap - 0
+
+if [ "$(is_bare_repository)" = false ]; then
+ git read-tree -u -m HEAD || exit
+fi
+
+exit 0
diff --git a/dts/upstream/src/arm/allwinner/sun5i-a13-pocketbook-614-plus.dts b/dts/upstream/src/arm/allwinner/sun5i-a13-pocketbook-614-plus.dts
new file mode 100644
index 0000000..ab8d138
--- /dev/null
+++ b/dts/upstream/src/arm/allwinner/sun5i-a13-pocketbook-614-plus.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 Denis Burkov <hitechshell@mail.ru>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "PocketBook 614 Plus";
+ compatible = "pocketbook,614-plus", "allwinner,sun5i-a13";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ linux,default-trigger = "default-on";
+ gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-0 {
+ label = "Right";
+ linux,code = <KEY_NEXT>;
+ gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+ };
+
+ key-1 {
+ label = "Left";
+ linux,code = <KEY_PREVIOUS>;
+ gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+ };
+ };
+
+ reg_3v3_mmc0: regulator-mmc0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-mmc0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+ vin-supply = <&reg_vcc3v3>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ };
+};
+
+&lradc {
+ vref-supply = <&reg_ldo2>;
+ status = "okay";
+
+ button-300 {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ channel = <0>;
+ voltage = <300000>;
+ };
+
+ button-700 {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ channel = <0>;
+ voltage = <700000>;
+ };
+
+ button-1000 {
+ label = "Left";
+ linux,code = <KEY_LEFT>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
+
+ button-1200 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <1200000>;
+ };
+
+ button-1500 {
+ label = "Right";
+ linux,code = <KEY_RIGHT>;
+ channel = <0>;
+ voltage = <1500000>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_3v3_mmc0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_4bit_pc_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+ status = "okay";
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pg_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm/allwinner/sun5i-a13.dtsi b/dts/upstream/src/arm/allwinner/sun5i-a13.dtsi
index 3325ab0..2c9152b 100644
--- a/dts/upstream/src/arm/allwinner/sun5i-a13.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun5i-a13.dtsi
@@ -62,14 +62,14 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
diff --git a/dts/upstream/src/arm/allwinner/sun5i-gr8-chip-pro.dts b/dts/upstream/src/arm/allwinner/sun5i-gr8-chip-pro.dts
index 5c3562b..ffbd99c 100644
--- a/dts/upstream/src/arm/allwinner/sun5i-gr8-chip-pro.dts
+++ b/dts/upstream/src/arm/allwinner/sun5i-gr8-chip-pro.dts
@@ -77,7 +77,7 @@
};
};
- mmc0_pwrseq: mmc0_pwrseq {
+ mmc0_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
};
diff --git a/dts/upstream/src/arm/allwinner/sun5i-r8-chip.dts b/dts/upstream/src/arm/allwinner/sun5i-r8-chip.dts
index 4192c23..8c784a2 100644
--- a/dts/upstream/src/arm/allwinner/sun5i-r8-chip.dts
+++ b/dts/upstream/src/arm/allwinner/sun5i-r8-chip.dts
@@ -77,7 +77,7 @@
};
};
- mmc0_pwrseq: mmc0_pwrseq {
+ mmc0_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
};
diff --git a/dts/upstream/src/arm/allwinner/sun6i-a31-hummingbird.dts b/dts/upstream/src/arm/allwinner/sun6i-a31-hummingbird.dts
index 236ebfc..5bce7a3 100644
--- a/dts/upstream/src/arm/allwinner/sun6i-a31-hummingbird.dts
+++ b/dts/upstream/src/arm/allwinner/sun6i-a31-hummingbird.dts
@@ -109,7 +109,7 @@
};
};
- reg_vga_3v3: vga_3v3_regulator {
+ reg_vga_3v3: vga-3v3-regulator {
compatible = "regulator-fixed";
regulator-name = "vga-3v3";
regulator-min-microvolt = <3300000>;
@@ -119,7 +119,7 @@
gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
diff --git a/dts/upstream/src/arm/allwinner/sun6i-a31.dtsi b/dts/upstream/src/arm/allwinner/sun6i-a31.dtsi
index 5cce491..f0145d6 100644
--- a/dts/upstream/src/arm/allwinner/sun6i-a31.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun6i-a31.dtsi
@@ -179,14 +179,14 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <70000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
@@ -1318,7 +1318,7 @@
compatible = "allwinner,sun6i-a31-prcm";
reg = <0x01f01400 0x200>;
- ar100: ar100_clk {
+ ar100: ar100-clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
clocks = <&rtc CLK_OSC32K>, <&osc24M>,
@@ -1327,7 +1327,7 @@
clock-output-names = "ar100";
};
- ahb0: ahb0_clk {
+ ahb0: ahb0-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -1336,14 +1336,14 @@
clock-output-names = "ahb0";
};
- apb0: apb0_clk {
+ apb0: apb0-clk {
compatible = "allwinner,sun6i-a31-apb0-clk";
#clock-cells = <0>;
clocks = <&ahb0>;
clock-output-names = "apb0";
};
- apb0_gates: apb0_gates_clk {
+ apb0_gates: apb0-gates-clk {
compatible = "allwinner,sun6i-a31-apb0-gates-clk";
#clock-cells = <1>;
clocks = <&apb0>;
@@ -1353,14 +1353,14 @@
"apb0_i2c";
};
- ir_clk: ir_clk {
+ ir_clk: ir-clk {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&rtc CLK_OSC32K>, <&osc24M>;
clock-output-names = "ir";
};
- apb0_rst: apb0_rst {
+ apb0_rst: apb0-rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
diff --git a/dts/upstream/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts b/dts/upstream/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
index 96554ab..f63d67e 100644
--- a/dts/upstream/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/dts/upstream/src/arm/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -75,7 +75,7 @@
};
};
- mmc2_pwrseq: mmc2_pwrseq {
+ mmc2_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
};
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts b/dts/upstream/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts
index caa935c..f2d7fab 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20-bananapi-m1-plus.dts
@@ -86,7 +86,7 @@
};
};
- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
};
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20-cubietruck.dts b/dts/upstream/src/arm/allwinner/sun7i-a20-cubietruck.dts
index 52160e3..be9b31d 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20-cubietruck.dts
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20-cubietruck.dts
@@ -96,7 +96,7 @@
};
};
- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
clocks = <&ccu CLK_OUT_A>;
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20-hummingbird.dts b/dts/upstream/src/arm/allwinner/sun7i-a20-hummingbird.dts
index 3def2a3..f1e26b7 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20-hummingbird.dts
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20-hummingbird.dts
@@ -65,7 +65,7 @@
stdout-path = "serial0:115200n8";
};
- reg_mmc3_vdd: mmc3_vdd {
+ reg_mmc3_vdd: regulator-mmc3-vdd {
compatible = "regulator-fixed";
regulator-name = "mmc3_vdd";
regulator-min-microvolt = <3000000>;
@@ -74,7 +74,7 @@
gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
};
- reg_gmac_vdd: gmac_vdd {
+ reg_gmac_vdd: regulator-gmac-vdd {
compatible = "regulator-fixed";
regulator-name = "gmac_vdd";
regulator-min-microvolt = <3000000>;
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts b/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
index 20bf09b..fb83573 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
@@ -14,7 +14,7 @@
model = "Olimex A20-Olimex-SOM-EVB-eMMC";
compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
- mmc2_pwrseq: mmc2_pwrseq {
+ mmc2_pwrseq: pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
};
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts b/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
index a59755a..e8977c2 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -13,7 +13,7 @@
model = "Olimex A20-SOM204-EVB-eMMC";
compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
- mmc2_pwrseq: mmc2_pwrseq {
+ mmc2_pwrseq: pwrseq-1 {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
};
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts b/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts
index 54af6c1..a554066 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20-olimex-som204-evb.dts
@@ -65,7 +65,7 @@
};
};
- rtl_pwrseq: rtl_pwrseq {
+ rtl_pwrseq: pwrseq-0 {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
};
@@ -177,7 +177,7 @@
non-removable;
status = "okay";
- rtl8723bs: sdio_wifi@1 {
+ rtl8723bs: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts b/dts/upstream/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts
index ecb91fb..435a189 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20-olinuxino-lime2.dts
@@ -82,7 +82,7 @@
};
};
- reg_axp_ipsout: axp_ipsout {
+ reg_axp_ipsout: regulator-axp-ipsout {
compatible = "regulator-fixed";
regulator-name = "axp-ipsout";
regulator-min-microvolt = <5000000>;
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts b/dts/upstream/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
index 3bfae98..29199b6 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
@@ -60,7 +60,7 @@
stdout-path = "serial0:115200n8";
};
- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
};
diff --git a/dts/upstream/src/arm/allwinner/sun7i-a20.dtsi b/dts/upstream/src/arm/allwinner/sun7i-a20.dtsi
index 5574299..5f44f09 100644
--- a/dts/upstream/src/arm/allwinner/sun7i-a20.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun7i-a20.dtsi
@@ -153,14 +153,14 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a23-a33.dtsi b/dts/upstream/src/arm/allwinner/sun8i-a23-a33.dtsi
index cd4bf60..2af8382 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a23-a33.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun8i-a23-a33.dtsi
@@ -108,7 +108,7 @@
#size-cells = <1>;
ranges;
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -116,7 +116,7 @@
clock-output-names = "osc24M";
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -733,7 +733,7 @@
compatible = "allwinner,sun8i-a23-prcm";
reg = <0x01f01400 0x200>;
- ar100: ar100_clk {
+ ar100: ar100-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -742,7 +742,7 @@
clock-output-names = "ar100";
};
- ahb0: ahb0_clk {
+ ahb0: ahb0-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -751,14 +751,14 @@
clock-output-names = "ahb0";
};
- apb0: apb0_clk {
+ apb0: apb0-clk {
compatible = "allwinner,sun8i-a23-apb0-clk";
#clock-cells = <0>;
clocks = <&ahb0>;
clock-output-names = "apb0";
};
- apb0_gates: apb0_gates_clk {
+ apb0_gates: apb0-gates-clk {
compatible = "allwinner,sun8i-a23-apb0-gates-clk";
#clock-cells = <1>;
clocks = <&apb0>;
@@ -767,7 +767,7 @@
"apb0_i2c";
};
- apb0_rst: apb0_rst {
+ apb0_rst: apb0-rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts b/dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
index d5f6aeb..0c585a6 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -52,7 +52,7 @@
ethernet0 = &esp8089;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -76,7 +76,7 @@
non-removable;
status = "okay";
- esp8089: sdio_wifi@1 {
+ esp8089: wifi@1 {
compatible = "esp,esp8089";
reg = <1>;
esp,crystal-26M-en = <2>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts b/dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
index 9f9232a..63cb4e1 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -52,7 +52,7 @@
ethernet0 = &esp8089;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -69,7 +69,7 @@
non-removable;
status = "okay";
- esp8089: sdio_wifi@1 {
+ esp8089: wifi@1 {
compatible = "esp,esp8089";
reg = <1>;
esp,crystal-26M-en = <2>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts b/dts/upstream/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts
index 2dfdd0a..f00ce03 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-a33-ga10h-v1.1.dts
@@ -85,7 +85,7 @@
non-removable;
status = "okay";
- rtl8703as: sdio_wifi@1 {
+ rtl8703as: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts b/dts/upstream/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts
index 065cb62..162ba93 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-a33-inet-d978-rev2.dts
@@ -78,7 +78,7 @@
non-removable;
status = "okay";
- rtl8723bs: sdio_wifi@1 {
+ rtl8723bs: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a33.dtsi b/dts/upstream/src/arm/allwinner/sun8i-a33.dtsi
index 30fdd27..36b2d78 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a33.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun8i-a33.dtsi
@@ -323,35 +323,35 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- gpu_alert0: gpu_alert0 {
+ gpu_alert0: gpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_alert1: cpu_alert1 {
+ cpu_alert1: cpu-alert1 {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
- gpu_alert1: gpu_alert1 {
+ gpu_alert1: gpu-alert1 {
/* milliCelsius */
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <110000>;
hysteresis = <2000>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts b/dts/upstream/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts
index 8d56b10..32e811f 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-a83t-bananapi-m3.dts
@@ -95,7 +95,7 @@
gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts b/dts/upstream/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts
index 8709933..d5e6dda 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-a83t-cubietruck-plus.dts
@@ -144,7 +144,7 @@
compatible = "linux,spdif-dit";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a83t-tbs-a711.dts b/dts/upstream/src/arm/allwinner/sun8i-a83t-tbs-a711.dts
index a7d4ca3..43982b1 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a83t-tbs-a711.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-a83t-tbs-a711.dts
@@ -123,7 +123,7 @@
vin-supply = <&reg_vbat>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
diff --git a/dts/upstream/src/arm/allwinner/sun8i-a83t.dtsi b/dts/upstream/src/arm/allwinner/sun8i-a83t.dtsi
index 94eb3bf..addf0cb 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-a83t.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun8i-a83t.dtsi
@@ -164,7 +164,7 @@
ranges;
/* TODO: PRCM block has a mux for this. */
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -177,14 +177,14 @@
* It is an internal RC-based oscillator.
* TODO: Its controls are in the PRCM block.
*/
- osc16M: osc16M_clk {
+ osc16M: osc16M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-output-names = "osc16M";
};
- osc16Md512: osc16Md512_clk {
+ osc16Md512: osc16Md512-clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <512>;
@@ -1127,7 +1127,7 @@
#reset-cells = <1>;
};
- r_cpucfg@1f01c00 {
+ cpucfg@1f01c00 {
compatible = "allwinner,sun8i-a83t-r-cpucfg";
reg = <0x1f01c00 0x400>;
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts b/dts/upstream/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
index d729b7c..d3a7c9f 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -103,7 +103,7 @@
cpu-supply = <&reg_vcc1v2>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts b/dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts
index 3356f42..79b03b3 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-r1.dts
@@ -43,11 +43,12 @@
/* Orange Pi R1 is based on Orange Pi Zero design */
#include "sun8i-h2-plus-orangepi-zero.dts"
+/delete-node/ &reg_vcc_wifi;
+
/ {
model = "Xunlong Orange Pi R1";
compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
- /delete-node/ reg_vcc_wifi;
/*
* Ths pin of this regulator is the same with the Wi-Fi extra
@@ -89,7 +90,7 @@
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
- rtl8189etv: sdio_wifi@1 {
+ rtl8189etv: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts b/dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts
index 3706216..1b001f2 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -80,7 +80,7 @@
};
};
- reg_vcc_wifi: reg_vcc_wifi {
+ reg_vcc_wifi: reg-vcc-wifi {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -105,7 +105,7 @@
states = <1100000 0>, <1300000 1>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <200>;
@@ -149,7 +149,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- xr819: sdio_wifi@1 {
+ xr819: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-beelink-x2.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-beelink-x2.dts
index a6d38ec..5b77300 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-beelink-x2.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-beelink-x2.dts
@@ -122,7 +122,7 @@
compatible = "linux,spdif-dit";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
@@ -185,7 +185,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- sdiowifi: sdio_wifi@1 {
+ sdiowifi: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts
index 343b02b..2b0566d 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-duo2.dts
@@ -87,7 +87,7 @@
vin-supply = <&reg_vcc5v0>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
@@ -119,7 +119,7 @@
non-removable;
status = "okay";
- sdio_wifi: sdio_wifi@1 {
+ sdio_wifi: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts
index 4ba533b..59bd074 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-m1-plus.dts
@@ -62,7 +62,7 @@
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
@@ -132,7 +132,7 @@
non-removable;
status = "okay";
- sdio_wifi: sdio_wifi@1 {
+ sdio_wifi: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts
index 9e1a33f..6d85370 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -73,7 +73,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-r1.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-r1.dts
index 42cd113..8706497 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-r1.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-nanopi-r1.dts
@@ -43,7 +43,7 @@
<1300000 0x1>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-2.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-2.dts
index f1f9dbe..d2ae47b 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-2.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-2.dts
@@ -105,7 +105,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
};
@@ -169,7 +169,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- rtl8189: sdio_wifi@1 {
+ rtl8189: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-lite.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-lite.dts
index 305b34a..6a4316a 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-lite.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-lite.dts
@@ -143,7 +143,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- rtl8189ftv: sdio_wifi@1 {
+ rtl8189ftv: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts
index babf4cf..8a49b33 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-pc-plus.dts
@@ -63,7 +63,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- rtl8189ftv: sdio_wifi@1 {
+ rtl8189ftv: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts
index 561ea1d..7a6444a 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -92,7 +92,7 @@
regulator-max-microvolt = <3300000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-q8-common.dtsi b/dts/upstream/src/arm/allwinner/sun8i-q8-common.dtsi
index 3d9a152..2725848 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-q8-common.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun8i-q8-common.dtsi
@@ -62,7 +62,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
/*
* Q8 boards use various PL# pins as wifi-en. On other boards
@@ -94,7 +94,7 @@
non-removable;
status = "okay";
- sdio_wifi: sdio_wifi@1 {
+ sdio_wifi: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts b/dts/upstream/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts
index bc39468..f4bf46b 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-r16-bananapi-m2m.dts
@@ -88,7 +88,7 @@
regulator-max-microvolt = <5000000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-r16-parrot.dts b/dts/upstream/src/arm/allwinner/sun8i-r16-parrot.dts
index 95543a9..7506752 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-r16-parrot.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-r16-parrot.dts
@@ -75,7 +75,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
};
diff --git a/dts/upstream/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts b/dts/upstream/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts
index 28197bb..cd2351a 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-r40-bananapi-m2-ultra.dts
@@ -100,7 +100,7 @@
enable-active-high;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
clocks = <&ccu CLK_OUTA>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-r40-oka40i-c.dts b/dts/upstream/src/arm/allwinner/sun8i-r40-oka40i-c.dts
index 0bd1336..15b0b4d 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-r40-oka40i-c.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-r40-oka40i-c.dts
@@ -62,7 +62,7 @@
regulator-max-microvolt = <5000000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
clocks = <&ccu CLK_OUTA>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-s3-pinecube.dts b/dts/upstream/src/arm/allwinner/sun8i-s3-pinecube.dts
index 20966e9..e0d4404 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-s3-pinecube.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-s3-pinecube.dts
@@ -51,7 +51,7 @@
startup-delay-us = <200000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
post-power-on-delay-ms = <200>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-v3s.dtsi b/dts/upstream/src/arm/allwinner/sun8i-v3s.dtsi
index e8a0447..9e13c2a 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-v3s.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun8i-v3s.dtsi
@@ -98,7 +98,7 @@
#size-cells = <1>;
ranges;
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -106,7 +106,7 @@
clock-output-names = "osc24M";
};
- osc32k: osc32k_clk {
+ osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/dts/upstream/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts b/dts/upstream/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts
index 4348710..6575ef2 100644
--- a/dts/upstream/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts
+++ b/dts/upstream/src/arm/allwinner/sun8i-v40-bananapi-m2-berry.dts
@@ -94,7 +94,7 @@
enable-active-high;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
clocks = <&ccu CLK_OUTA>;
diff --git a/dts/upstream/src/arm/allwinner/sun9i-a80.dtsi b/dts/upstream/src/arm/allwinner/sun9i-a80.dtsi
index 7d3f330..a1ae092 100644
--- a/dts/upstream/src/arm/allwinner/sun9i-a80.dtsi
+++ b/dts/upstream/src/arm/allwinner/sun9i-a80.dtsi
@@ -196,14 +196,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: mii_phy_tx_clk {
+ mii_phy_tx_clk: mii-phy-tx-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: gmac_int_tx_clk {
+ gmac_int_tx_clk: gmac-int-tx-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
diff --git a/dts/upstream/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi b/dts/upstream/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi
index 1d1d127..873817d 100644
--- a/dts/upstream/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi
+++ b/dts/upstream/src/arm/allwinner/sunxi-bananapi-m2-plus.dtsi
@@ -98,7 +98,7 @@
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/dts/upstream/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi b/dts/upstream/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
index 60804b0..be5f552 100644
--- a/dts/upstream/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
+++ b/dts/upstream/src/arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
@@ -18,7 +18,7 @@
stdout-path = "serial0:115200n8";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
post-power-on-delay-ms = <200>;
diff --git a/dts/upstream/src/arm/allwinner/sunxi-h3-h5.dtsi b/dts/upstream/src/arm/allwinner/sunxi-h3-h5.dtsi
index ade1cd5..7df6051 100644
--- a/dts/upstream/src/arm/allwinner/sunxi-h3-h5.dtsi
+++ b/dts/upstream/src/arm/allwinner/sunxi-h3-h5.dtsi
@@ -83,7 +83,7 @@
#size-cells = <1>;
ranges;
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -91,7 +91,7 @@
clock-output-names = "osc24M";
};
- osc32k: osc32k_clk {
+ osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index 7b54088..3c89250 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -813,7 +813,6 @@
};
&adc0 {
- ref_voltage = <2500>;
status = "okay";
pinctrl-names = "default";
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
index c4b2efb..bb2e6ef 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -83,6 +83,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <&eth0_macaddress>;
+ nvmem-cell-names = "mac-address";
};
&i2c1 {
@@ -103,6 +106,12 @@
compatible = "st,24c128", "atmel,24c128";
reg = <0x57>;
pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
};
};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
new file mode 100644
index 0000000..9d00ce9
--- /dev/null
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/watchdog/aspeed-wdt.h>
+
+/{
+ model = "ASRock E3C256D4I BMC";
+ compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+
+ i2c20 = &i2c2mux0ch0;
+ i2c21 = &i2c2mux0ch1;
+ i2c22 = &i2c2mux0ch2;
+ i2c23 = &i2c2mux0ch3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* BMC heartbeat */
+ led-0 {
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "timer";
+ };
+
+ /* system fault */
+ led-1 {
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_RED>;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart_routing {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <&eth0_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c2mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c2mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c2mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c2mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ vrm@60 {
+ compatible = "isil,isl69269";
+ reg = <0x60>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ /* FRU eeprom */
+ eeprom@57 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x57>;
+ pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
+ };
+};
+
+&video {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+ status = "okay";
+};
+
+&wdt1 {
+ aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&wdt2 {
+ aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default /* CPU */
+ &pinctrl_pwm2_default /* rear */
+ &pinctrl_pwm4_default>; /* front */
+
+ /* CPU */
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ /* rear */
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ /* front */
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /* A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "",
+ /* B */ "", "", "", "", "", "", "", "",
+ /* C */ "", "", "", "", "", "", "", "",
+ /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+ "", "", "", "",
+ /* E */ "", "", "", "", "", "", "", "",
+ /* F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+ "", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+ /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+ "", "", "", "",
+ /* H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N",
+ "MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+ /* I */ "", "", "", "", "", "", "", "",
+ /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "",
+ /* K */ "", "", "", "", "", "", "", "",
+ /* L */ "", "", "", "", "", "", "", "",
+ /* M */ "", "", "", "", "", "", "", "",
+ /* N */ "", "", "", "", "", "", "", "",
+ /* O */ "", "", "", "", "", "", "", "",
+ /* P */ "", "", "", "", "", "", "", "",
+ /* Q */ "", "", "", "", "", "", "", "",
+ /* R */ "", "", "", "", "", "", "", "",
+ /* S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "",
+ /* T */ "", "", "", "", "", "", "", "",
+ /* U */ "", "", "", "", "", "", "", "",
+ /* V */ "", "", "", "", "", "", "", "",
+ /* W */ "", "", "", "", "", "", "", "",
+ /* X */ "", "", "", "", "", "", "", "",
+ /* Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+ /* Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+ "", "", "", "",
+ /* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+ "", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+ /* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "",
+ /* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+ &pinctrl_adc1_default /* 5VSB */
+ &pinctrl_adc2_default /* CPU1 */
+ &pinctrl_adc3_default /* VCCSA */
+ &pinctrl_adc4_default /* VCCM */
+ &pinctrl_adc5_default /* V10M */
+ &pinctrl_adc6_default /* VCCIO */
+ &pinctrl_adc7_default /* VCCGT */
+ &pinctrl_adc8_default /* VPPM */
+ &pinctrl_adc9_default /* BAT */
+ &pinctrl_adc10_default /* 3V */
+ &pinctrl_adc11_default /* 5V */
+ &pinctrl_adc12_default /* 12V */
+ &pinctrl_adc13_default /* GND */
+ &pinctrl_adc14_default /* GND */
+ &pinctrl_adc15_default>; /* GND */
+};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts
index 4554abf..6dd2216 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -71,6 +71,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <&eth0_macaddress>;
+ nvmem-cell-names = "mac-address";
};
&i2c0 {
@@ -98,14 +101,14 @@
/* IPB PMIC */
lm25066@40 {
- compatible = "lm25066";
+ compatible = "ti,lm25066";
reg = <0x40>;
shunt-resistor-micro-ohms = <1000>;
};
/* 12VSB PMIC */
lm25066@41 {
- compatible = "lm25066";
+ compatible = "ti,lm25066";
reg = <0x41>;
shunt-resistor-micro-ohms = <10000>;
};
@@ -131,6 +134,12 @@
compatible = "st,24c128", "atmel,24c128";
reg = <0x50>;
pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
};
};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
new file mode 100644
index 0000000..5554858
--- /dev/null
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+ model = "ASRock SPC621D8HM3 BMC";
+ compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+
+ i2c20 = &i2c1mux0ch0;
+ i2c21 = &i2c1mux0ch1;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* BMC heartbeat */
+ led-0 {
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "timer";
+ };
+
+ /* system fault */
+ led-1 {
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_RED>;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+ aspeed,lpc-io-reg = <0x2f8>;
+ aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <&eth0_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* hardware monitor/thermal sensor */
+ temperature-sensor@29 {
+ compatible = "nuvoton,nct7802";
+ reg = <0x29>;
+ };
+
+ /* motherboard temp sensor (TMP1, near BMC) */
+ temperature-sensor@4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+
+ /* motherboard FRU eeprom */
+ eeprom@50 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
+ };
+
+ /* M.2 slot smbus mux */
+ i2c-mux@71 {
+ compatible = "nxp,pca9545";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /* A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
+ "BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
+ "", "", "", "",
+ /* B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
+ "", "", "", "GPIO_RST",
+ /* C */ "", "", "", "", "", "", "", "",
+ /* D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
+ "FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
+ "NMI_BTN_N", "BMC_NMI",
+ "", "",
+ /* E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
+ /* F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
+ "FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
+ "FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
+ "FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
+ /* G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
+ "BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
+ /* H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
+ "FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+ /* I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
+ "IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
+ "", "", "", "",
+ /* J */ "", "", "", "", "", "", "", "",
+ /* K */ "", "", "", "", "", "", "", "",
+ /* L */ "", "", "", "", "", "", "", "",
+ /* M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
+ "IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
+ "FM_CPU1_PROCHOT_BMC_LVC3_N", "",
+ "FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
+ /* N */ "", "", "", "", "", "", "", "",
+ /* O */ "", "", "", "", "", "", "", "",
+ /* P */ "", "", "", "", "", "", "", "",
+ /* Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
+ /* R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
+ "", "FM_BMC_PCH_SCI_LPC_N", "", "",
+ /* S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
+ "FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
+ "", "", "", "",
+ /* T */ "", "", "", "", "", "", "", "",
+ /* U */ "", "", "", "", "", "", "", "",
+ /* V */ "", "", "", "", "", "", "", "",
+ /* W */ "", "", "", "", "", "", "", "",
+ /* X */ "", "", "", "", "", "", "", "",
+ /* Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
+ "", "", "", "",
+ /* Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+ "", "", "", "",
+ /* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
+ "FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
+ "", "IRQ_SML0_ALERT_MUX_N",
+ "IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
+ /* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
+ "ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
+ "", "", "", "",
+ /* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+ &pinctrl_adc1_default /* 5VSB */
+ &pinctrl_adc2_default /* CPU1 */
+ &pinctrl_adc3_default /* NC */
+ &pinctrl_adc4_default /* VCCMABCD */
+ &pinctrl_adc5_default /* VCCMEFGH */
+ &pinctrl_adc6_default /* NC */
+ &pinctrl_adc7_default /* NC */
+ &pinctrl_adc8_default /* PVNN_PCH */
+ &pinctrl_adc9_default /* 1P05PCH */
+ &pinctrl_adc10_default /* 1P8PCH */
+ &pinctrl_adc11_default /* BAT */
+ &pinctrl_adc12_default /* 3V */
+ &pinctrl_adc13_default /* 5V */
+ &pinctrl_adc14_default /* 12V */
+ &pinctrl_adc15_default>; /* GND */
+};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-x570d4u.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 0000000..8dee4fa
--- /dev/null
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Asrock Rack X570D4U BMC";
+ compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+ aliases {
+ i2c40 = &i2c4mux0ch0;
+ i2c41 = &i2c4mux0ch1;
+ i2c42 = &i2c4mux0ch2;
+ i2c43 = &i2c4mux0ch3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pci_memory: region@9a000000 {
+ no-map;
+ reg = <0x9a000000 0x00010000>; /* 64K */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02800000>; /* 40M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* led-heartbeat-n */
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "timer";
+ };
+
+ led-1 {
+ /* led-fault-n */
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_FAULT;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+ <&adc 10>, <&adc 11>, <&adc 12>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /* A */ "input-locatorled-n", "", "", "", "", "", "", "",
+ /* B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
+ /* C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
+ /* D */ "button-power-n", "control-power-n", "button-reset-n",
+ "control-reset-n", "", "", "", "",
+ /* E */ "", "", "", "", "", "", "", "",
+ /* F */ "", "", "", "", "", "", "", "",
+ /* G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
+ "input-id2-n", "input-aux-smb-alert-n", "",
+ "input-psu-smb-alert-n", "",
+ /* H */ "", "", "", "", "input-mfg-mode-n", "",
+ "led-heartbeat-n", "input-case-open-n",
+ /* I */ "", "", "", "", "", "", "", "",
+ /* J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
+ /* K */ "", "", "", "", "", "", "", "",
+ /* L */ "", "", "", "", "", "", "", "",
+ /* M */ "", "", "", "", "", "", "", "",
+ /* N */ "", "", "", "", "", "", "", "",
+ /* O */ "", "", "", "", "", "", "", "",
+ /* P */ "", "", "", "", "", "", "", "",
+ /* Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
+ "input-pcie-wake-n",
+ /* R */ "", "", "", "", "", "", "", "",
+ /* S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
+ /* T */ "", "", "", "", "", "", "", "",
+ /* U */ "", "", "", "", "", "", "", "",
+ /* V */ "", "", "", "", "", "", "", "",
+ /* W */ "", "", "", "", "", "", "", "",
+ /* X */ "", "", "", "", "", "", "", "",
+ /* Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
+ "", "",
+ /* Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
+ "", "",
+ /* AA */ "input-cpu1-thermtrip-latch-n", "",
+ "input-cpu1-prochot-n", "", "", "", "", "",
+ /* AB */ "", "input-power-good", "", "", "", "", "", "",
+ /* AC */ "", "", "", "", "", "", "", "";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <&eth0_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+ use-ncsi;
+
+ nvmem-cells = <&eth1_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ /* SMBus on auxiliary panel header (AUX_PANEL1) */
+ status = "okay";
+};
+
+&i2c1 {
+ /* Hardware monitoring SMBus */
+ status = "okay";
+
+ w83773g@4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+};
+
+&i2c2 {
+ /* PSU SMBus (PSU_SMB1) */
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c4mux0ch0: i2c@0 {
+ /* SMBus on PCI express 16x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c4mux0ch1: i2c@1 {
+ /* SMBus on PCI express 8x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c4mux0ch2: i2c@2 {
+ /* Unknown */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c4mux0ch3: i2c@3 {
+ /* SMBus on PCI express 1x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c5 {
+ /* SMBus on BMC connector (BMC_SMB_1) */
+ status = "okay";
+};
+
+&i2c7 {
+ /* FRU and SPD EEPROM SMBus */
+ status = "okay";
+
+ eeprom@57 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x57>;
+ pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
+
+ eth1_macaddress: macaddress@3f88 {
+ reg = <0x3f88 6>;
+ };
+ };
+};
+
+&i2c8 {
+ /* SMBus on intelligent platform management bus header (IPMB_1) */
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&p2a {
+ status = "okay";
+ memory-region = <&pci_memory>;
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default>;
+
+ fan@0 {
+ /* FAN1 (4-pin) */
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ /* FAN2 (4-pin) */
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ /* FAN3 (4-pin) */
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ /* FAN4 (6-pin) */
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+ };
+
+ fan@4 {
+ /* FAN6 (6-pin) */
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+ };
+
+ fan@5 {
+ /* FAN5 (6-pin) */
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+ };
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+ &pinctrl_adc1_default /* 5VSB */
+ &pinctrl_adc2_default /* VCPU */
+ &pinctrl_adc3_default /* VSOC */
+ &pinctrl_adc4_default /* VCCM */
+ &pinctrl_adc5_default /* APU-VDDP */
+ &pinctrl_adc6_default /* PM-VDD-CLDO */
+ &pinctrl_adc7_default /* PM-VDDCR-S5 */
+ &pinctrl_adc8_default /* PM-VDDCR */
+ &pinctrl_adc9_default /* VBAT */
+ &pinctrl_adc10_default /* 3V */
+ &pinctrl_adc11_default /* 5V */
+ &pinctrl_adc12_default>; /* 12V */
+};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-asus-x4tf.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 0000000..64f4ed0
--- /dev/null
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "ASUS-X4TF";
+ compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial4:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ video_engine_memory: video {
+ size = <0x04000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+ <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-heartbeat {
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-uid {
+ gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ default-state = "off";
+ };
+
+ led-status_Y {
+ gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-sys_boot_status {
+ gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+&adc0 {
+ vref = <2500>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref = <2500>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+ status = "okay";
+};
+
+&lpc_snoop {
+ snoop-ports = <0x80>;
+ status = "okay";
+};
+
+&mac2 {
+ status = "okay";
+ phy-mode = "rmii";
+ use-ncsi;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rmii";
+ use-ncsi;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "bios";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+
+ pca9555_4_20: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9555_4_22: gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9555_4_24: gpio@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ /*A0 - A3 0*/ "", "STRAP_BMC_BATTERY_GPIO1", "", "",
+ /*A4 - A7 4*/ "", "", "", "",
+ /*B0 - B7 8*/ "", "", "", "", "", "", "", "";
+ };
+
+ pca9555_4_26: gpio@26 {
+ compatible = "nxp,pca9555";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ status = "okay";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel_1: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_2: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_3: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_4: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ pca9555_5_24: gpio@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ status = "okay";
+ reg = <0x70 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel_5: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ pca9555_5_5_20: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "SYS_FAN6", "SYS_FAN5",
+ "SYS_FAN4", "SYS_FAN3",
+ "SYS_FAN2", "SYS_FAN1";
+ };
+
+ pca9555_5_5_21: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina219";
+ reg = <0x44>;
+ shunt-resistor = <2>;
+ };
+ };
+
+ channel_6: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_7: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_8: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ pca9555_6_27: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9555_6_20: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ /*A0 0*/ "", "", "", "", "", "", "", "",
+ /*B0 8*/ "Drive_NVMe1", "Drive_NVMe2", "", "",
+ /*B4 12*/ "", "", "", "";
+ };
+
+ pca9555_6_21: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ status = "okay";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ idle-state = <1>;
+
+ channel_9: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+
+ power-monitor@40 {
+ compatible = "ti,ina219";
+ reg = <0x40>;
+ shunt-resistor = <2>;
+ };
+
+ power-monitor@41 {
+ compatible = "ti,ina219";
+ reg = <0x41>;
+ shunt-resistor = <5>;
+ };
+ };
+
+ channel_10: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_11: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_12: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ status = "okay";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ channel_13: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_14: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_15: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_16: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ status = "okay";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ channel_17: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_18: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ power-monitor@41 {
+ compatible = "ti,ina219";
+ reg = <0x41>;
+ shunt-resistor = <5>;
+ };
+ };
+
+ channel_19: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_20: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c14 {
+ status = "okay";
+ multi-master;
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c08";
+ reg = <0x51>;
+ };
+};
+
+&sgpiom0 {
+ status = "okay";
+ ngpios = <128>;
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&kcs1 {
+ aspeed,lpc-io-reg = <0xca0>;
+ status = "okay";
+};
+
+&kcs2 {
+ aspeed,lpc-io-reg = <0xca8>;
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart_routing {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0 0*/ "", "", "", "", "", "", "", "",
+ /*B0 8*/ "", "", "", "", "", "", "PS_PWROK", "",
+ /*C0 16*/ "", "", "", "", "", "", "", "",
+ /*D0 24*/ "", "", "", "", "", "", "", "",
+ /*E0 32*/ "", "", "", "", "", "", "", "",
+ /*F0 40*/ "", "", "", "", "", "", "", "",
+ /*G0 48*/ "", "", "", "", "", "", "", "",
+ /*H0 56*/ "", "", "", "", "", "", "", "",
+ /*I0 64*/ "", "", "", "", "", "", "", "",
+ /*J0 72*/ "", "", "", "", "", "", "", "",
+ /*K0 80*/ "", "", "", "", "", "", "", "",
+ /*L0 88*/ "", "", "", "", "", "", "", "",
+ /*M0 96*/ "", "", "", "", "", "", "", "",
+ /*N0 104*/ "", "", "", "",
+ /*N4 108*/ "POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+ /*O0 112*/ "", "", "", "", "", "", "", "",
+ /*P0 120*/ "ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+ /*P4 124*/ "RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+ /*Q0 128*/ "", "", "", "", "", "", "", "",
+ /*R0 136*/ "", "", "", "", "", "", "", "",
+ /*S0 144*/ "", "", "", "", "", "", "", "",
+ /*T0 152*/ "", "", "", "", "", "", "", "",
+ /*U0 160*/ "", "", "", "", "", "", "", "",
+ /*V0 168*/ "", "", "", "", "", "", "", "",
+ /*W0 176*/ "", "", "", "", "", "", "", "",
+ /*X0 184*/ "", "", "", "", "", "", "", "",
+ /*Y0 192*/ "", "", "", "", "", "", "", "",
+ /*Z0 200*/ "", "", "", "", "", "", "", "";
+};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts
index 6600f7e..b6bfdae 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-delta-ahe50dc.dts
@@ -14,11 +14,11 @@
#define EFUSE(hexaddr, num) \
efuse@##hexaddr { \
- compatible = "lm25066"; \
+ compatible = "ti,lm25066"; \
reg = <0x##hexaddr>; \
shunt-resistor-micro-ohms = <675>; \
regulators { \
- efuse##num: vout0 { \
+ efuse##num: vout { \
regulator-name = __stringify(efuse##num##-reg); \
}; \
}; \
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-cloudripper.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-cloudripper.dts
deleted file mode 100644
index d49328f..0000000
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-cloudripper.dts
+++ /dev/null
@@ -1,544 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
- model = "Facebook Cloudripper BMC";
- compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
-
- aliases {
- /*
- * PCA9548 (1-0070) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c16 = &imux16;
- i2c17 = &imux17;
- i2c18 = &imux18;
- i2c19 = &imux19;
- i2c20 = &imux20;
- i2c21 = &imux21;
- i2c22 = &imux22;
- i2c23 = &imux23;
-
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to
- * SCM (System Controller Module).
- */
- i2c24 = &imux24;
- i2c25 = &imux25;
- i2c26 = &imux26;
- i2c27 = &imux27;
- i2c28 = &imux28;
- i2c29 = &imux29;
- i2c30 = &imux30;
- i2c31 = &imux31;
-
- /*
- * PCA9548 (3-0070) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c32 = &imux32;
- i2c33 = &imux33;
- i2c34 = &imux34;
- i2c35 = &imux35;
- i2c36 = &imux36;
- i2c37 = &imux37;
- i2c38 = &imux38;
- i2c39 = &imux39;
-
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to
- * PDB (Power Delivery Board).
- */
- i2c40 = &imux40;
- i2c41 = &imux41;
- i2c42 = &imux42;
- i2c43 = &imux43;
- i2c44 = &imux44;
- i2c45 = &imux45;
- i2c46 = &imux46;
- i2c47 = &imux47;
-
- /*
- * PCA9548 (15-0076) provides 8 channels connecting to
- * FCM (Fan Controller Module).
- */
- i2c48 = &imux48;
- i2c49 = &imux49;
- i2c50 = &imux50;
- i2c51 = &imux51;
- i2c52 = &imux52;
- i2c53 = &imux53;
- i2c54 = &imux54;
- i2c55 = &imux55;
- };
-
- spi_gpio: spi {
- num-chipselects = <2>;
- cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
- <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-
- eeprom@1 {
- compatible = "atmel,at93c46d";
- spi-max-frequency = <250000>;
- data-size = <16>;
- spi-cs-high;
- reg = <1>;
- };
- };
-};
-
-&ehci1 {
- status = "okay";
-};
-
-/*
- * "mdio1" is connected to the MDC/MDIO interface of the on-board
- * management switch (whose ports are connected to BMC, Host and front
- * panel ethernet port).
- */
-&mdio1 {
- status = "okay";
-};
-
-&mdio3 {
- status = "okay";
-
- ethphy1: ethernet-phy@13 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x0d>;
- };
-};
-
-&mac3 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&ethphy1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
-
-&i2c0 {
- multi-master;
- bus-frequency = <1000000>;
-};
-
-&i2c1 {
- /*
- * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
- * Main Board).
- */
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux16: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux17: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux18: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux19: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux20: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux21: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux22: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux23: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c2 {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
- * Controller Module).
- */
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux24: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux25: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux26: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux27: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux28: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux29: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux30: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux31: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c3 {
- /*
- * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
- * Main Board).
- */
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux32: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux33: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux34: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux35: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux36: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux37: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux38: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux39: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c6 {
- lp5012@14 {
- compatible = "ti,lp5012";
- reg = <0x14>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- multi-led@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "sys";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "fan";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "psu";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "scm";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
- };
-};
-
-&i2c8 {
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
- * Delivery Board).
- */
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux40: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux41: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux42: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux43: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux44: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux45: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux46: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux47: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c15 {
- /*
- * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
- * Controller Module).
- */
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux48: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux49: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux50: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux51: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux52: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux53: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux54: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux55: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts
index 7a53f54..998598c 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -66,7 +66,7 @@
pinctrl-0 = <&pinctrl_rmii4_default>;
no-hw-checksum;
use-ncsi;
- mlx,multi-host;
+ mellanox,multi-host;
ncsi-ctrl,start-redo-probe;
ncsi-ctrl,no-channel-monitor;
ncsi-package = <1>;
@@ -211,7 +211,6 @@
};
&adc0 {
- ref_voltage = <2500>;
status = "okay";
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
&pinctrl_adc2_default &pinctrl_adc3_default
@@ -220,7 +219,6 @@
};
&adc1 {
- ref_voltage = <2500>;
status = "okay";
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
&pinctrl_adc11_default &pinctrl_adc12_default
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-harma.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-harma.dts
new file mode 100644
index 0000000..c118d47
--- /dev/null
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-harma.dts
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Harma";
+ compatible = "facebook,harma-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart4;
+ serial4 = &uart5;
+
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ spi1 = &spi_gpio;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "power_blue";
+ default-state = "off";
+ gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi_gpio: spi-gpio {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+ tpmdev@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+// HOST BIOS Debug
+&uart1 {
+ status = "okay";
+};
+
+// SOL Host Console
+&uart2 {
+ status = "okay";
+ pinctrl-0 = <>;
+};
+
+// SOL BMC Console
+&uart4 {
+ status = "okay";
+ pinctrl-0 = <>;
+};
+
+// BMC Debug Console
+&uart5 {
+ status = "okay";
+};
+
+// MTIA
+&uart6 {
+ status = "okay";
+};
+
+&uart_routing {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ use-ncsi;
+ mellanox,multi-host;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+// BIOS Flash
+&spi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <12000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ pwm@5e{
+ compatible = "max31790";
+ reg = <0x5e>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ // MB NIC FRU
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ pwm@5e{
+ compatible = "max31790";
+ reg = <0x5e>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9543";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imux20: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ //Retimer Flash
+ eeprom@50 {
+ compatible = "atmel,24c2048";
+ reg = <0x50>;
+ pagesize = <128>;
+ };
+ };
+ imux21: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ retimer@24 {
+ compatible = "asteralabs,pt5161l";
+ reg = <0x24>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ // PDB FRU
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ power-monitor@69 {
+ compatible = "pmbus";
+ reg = <0x69>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+
+ power-monitor@22 {
+ compatible = "lltc,ltc4286";
+ reg = <0x22>;
+ adi,vrange-low-enable;
+ shunt-resistor-micro-ohms = <500>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9543";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imux22: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ imux23: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+
+ gpio@30 {
+ compatible = "nxp,pca9555";
+ reg = <0x30>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ gpio@31 {
+ compatible = "nxp,pca9555";
+ reg = <0x31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "","","","",
+ "","","presence-cmm","",
+ "","","","",
+ "","","","";
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ // PTTV FRU
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+ retimer@24 {
+ compatible = "asteralabs,pt5161l";
+ reg = <0x24>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imux28: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ imux29: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ //MB FRU
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+ };
+ imux30: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ imux31: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+// To Debug card
+&i2c14 {
+ status = "okay";
+ multi-master;
+
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ // SCM FRU
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&adc0 {
+ aspeed,int-vref-microvolt = <2500000>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ aspeed,int-vref-microvolt = <2500000>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","",
+ "bmc-spi-mux-select-0","led-identify","","",
+ /*C0-C7*/ "reset-cause-platrst","","","","",
+ "cpu0-err-alert","","",
+ /*D0-D7*/ "","","sol-uart-select","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","",
+ "leakage-detect-alert","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "led-postcode-0","led-postcode-1",
+ "led-postcode-2","led-postcode-3",
+ "led-postcode-4","led-postcode-5",
+ "led-postcode-6","led-postcode-7",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "power-button","power-host-control",
+ "reset-button","","led-power","","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","led-identify-gate","",
+ /*V0-V7*/ "","","","",
+ "rtc-battery-voltage-read-enable","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "ac-power-button","","","","","","","",
+ /*18B0-18B7*/ "","","","","","","","",
+ /*18C0-18C7*/ "","","","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+ status = "okay";
+ max-ngpios = <128>;
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+ gpio-line-names =
+ /*in - out - in - out */
+ /*A0-A3 line 0-7*/
+ "presence-scm-cable","power-config-disable-e1s-0",
+ "","",
+ "","power-config-disable-e1s-1",
+ "","",
+ /*A4-A7 line 8-15*/
+ "","power-config-asic-module-enable",
+ "","power-config-asic-power-good",
+ "","power-config-pdb-power-good",
+ "presence-cpu","smi-control-n",
+ /*B0-B3 line 16-23*/
+ "","nmi-control-n",
+ "","nmi-control-sync-flood-n",
+ "","",
+ "","",
+ /*B4-B7 line 24-31*/
+ "","FM_CPU_SP5R1",
+ "reset-cause-rsmrst","FM_CPU_SP5R2",
+ "","FM_CPU_SP5R3",
+ "","FM_CPU_SP5R4",
+ /*C0-C3 line 32-39*/
+ "","FM_CPU0_SA0",
+ "","FM_CPU0_SA1",
+ "","rt-cpu0-p0-enable",
+ "","rt-cpu0-p1-enable",
+ /*C4-C7 line 40-47*/
+ "","smb-rt-rom-p0-select",
+ "","smb-rt-rom-p1-select",
+ "","i3c-cpu-mux0-oe-n",
+ "","i3c-cpu-mux0-select",
+ /*D0-D3 line 48-55*/
+ "","i3c-cpu-mux1-oe-n",
+ "","i3c-cpu-mux1-select",
+ "","reset-control-bmc",
+ "","reset-control-cpu0-p0-mux",
+ /*D4-D7 line 56-63*/
+ "","reset-control-cpu0-p1-mux",
+ "","reset-control-e1s-mux",
+ "power-host-good","reset-control-mb-mux",
+ "host0-ready","reset-control-smb-e1s-0",
+ /*E0-E3 line 64-71*/
+ "","reset-control-smb-e1s-1",
+ "post-end-n","reset-control-srst",
+ "presence-e1s-0","reset-control-usb-hub",
+ "","reset-control",
+ /*E4-E7 line 72-79*/
+ "presence-e1s-1","reset-control-cpu-kbrst",
+ "","reset-control-platrst",
+ "","bmc-jtag-mux-select-0",
+ "","bmc-jtag-mux-select-1",
+ /*F0-F3 line 80-87*/
+ "","bmc-jtag-select",
+ "","bmc-ready-n",
+ "","bmc-ready-sgpio",
+ "","rt-cpu0-p0-force-enable",
+ /*F4-F7 line 88-95*/
+ "presence-asic-modules-0","rt-cpu0-p1-force-enable",
+ "presence-asic-modules-1","bios-debug-msg-disable",
+ "","uart-control-buffer-select",
+ "","ac-control-n",
+ /*G0-G3 line 96-103*/
+ "FM_CPU_CORETYPE2","",
+ "FM_CPU_CORETYPE1","",
+ "FM_CPU_CORETYPE0","",
+ "FM_BOARD_REV_ID5","",
+ /*G4-G7 line 104-111*/
+ "FM_BOARD_REV_ID4","",
+ "FM_BOARD_REV_ID3","",
+ "FM_BOARD_REV_ID2","",
+ "FM_BOARD_REV_ID1","",
+ /*H0-H3 line 112-119*/
+ "FM_BOARD_REV_ID0","",
+ "","","","","","",
+ /*H4-H7 line 120-127*/
+ "","",
+ "reset-control-pcie-expansion-3","",
+ "reset-control-pcie-expansion-2","",
+ "reset-control-pcie-expansion-1","",
+ /*I0-I3 line 128-135*/
+ "reset-control-pcie-expansion-0","",
+ "FM_EXP_SLOT_ID1","",
+ "FM_EXP_SLOT_ID0","",
+ "","",
+ /*I4-I7 line 136-143*/
+ "","","","","","","","",
+ /*J0-J3 line 144-151*/
+ "","","","","","","","",
+ /*J4-J7 line 152-159*/
+ "SLOT_ID_BCB_0","",
+ "SLOT_ID_BCB_1","",
+ "SLOT_ID_BCB_2","",
+ "SLOT_ID_BCB_3","",
+ /*K0-K3 line 160-167*/
+ "","","","","","","P0_I3C_APML_ALERT_L","",
+ /*K4-K7 line 168-175*/
+ "","","","","","","irq-uv-detect-alert","",
+ /*L0-L3 line 176-183*/
+ "irq-hsc-alert","",
+ "cpu0-prochot-alert","",
+ "cpu0-thermtrip-alert","",
+ "reset-cause-pcie","",
+ /*L4-L7 line 184-191*/
+ "pvdd11-ocp-alert","","","","","","","",
+ /*M0-M3 line 192-199*/
+ "","","","","","","","",
+ /*M4-M7 line 200-207*/
+ "","","","","","","","",
+ /*N0-N3 line 208-215*/
+ "","","","","","","","",
+ /*N4-N7 line 216-223*/
+ "","","","","","","","",
+ /*O0-O3 line 224-231*/
+ "","","","","","","","",
+ /*O4-O7 line 232-239*/
+ "","","","","","","","",
+ /*P0-P3 line 240-247*/
+ "","","","","","","","",
+ /*P4-P7 line 248-255*/
+ "","","","","","","","";
+};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-minerva-cmc.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
deleted file mode 100644
index f04ef90..0000000
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2023 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
- model = "Facebook Minerva CMC";
- compatible = "facebook,minerva-cmc", "aspeed,ast2600";
-
- aliases {
- serial5 = &uart5;
- };
-
- chosen {
- stdout-path = "serial5:57600n8";
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x80000000>;
- };
-
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
- <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
- <&adc1 2>;
- };
-};
-
-&uart6 {
- status = "okay";
-};
-
-&wdt1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdtrst1_default>;
- aspeed,reset-type = "soc";
- aspeed,external-signal;
- aspeed,ext-push-pull;
- aspeed,ext-active-high;
- aspeed,ext-pulse-duration = <256>;
-};
-
-&mac3 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rmii4_default>;
- use-ncsi;
- mlx,multi-host;
-};
-
-&fmc {
- status = "okay";
- flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "bmc";
- spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
- };
- flash@1 {
- status = "okay";
- m25p,fast-read;
- label = "alt-bmc";
- spi-max-frequency = <50000000>;
- };
-};
-
-&rtc {
- status = "okay";
-};
-
-&sgpiom1 {
- status = "okay";
- ngpios = <128>;
- bus-frequency = <2000000>;
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-
- temperature-sensor@4b {
- compatible = "ti,tmp75";
- reg = <0x4B>;
- };
-
- eeprom@51 {
- compatible = "atmel,24c128";
- reg = <0x51>;
- };
-};
-
-&i2c2 {
- status = "okay";
-
- i2c-mux@77 {
- compatible = "nxp,pca9548";
- reg = <0x77>;
- #address-cells = <1>;
- #size-cells = <0>;
- i2c-mux-idle-disconnect;
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
- };
-
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
- };
-
- i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
-
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
- };
-
- i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
-
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
- };
- };
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2c6 {
- status = "okay";
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2c8 {
- status = "okay";
-};
-
-&i2c9 {
- status = "okay";
-};
-
-&i2c10 {
- status = "okay";
-};
-
-&i2c11 {
- status = "okay";
-};
-
-&i2c12 {
- status = "okay";
-};
-
-&i2c13 {
- status = "okay";
-};
-
-&i2c14 {
- status = "okay";
- multi-master;
-
- ipmb@10 {
- compatible = "ipmb-dev";
- reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
- i2c-protocol;
- };
-};
-
-&i2c15 {
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
-};
-
-&adc0 {
- aspeed,int-vref-microvolt = <2500000>;
- status = "okay";
- pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
- &pinctrl_adc2_default &pinctrl_adc3_default
- &pinctrl_adc4_default &pinctrl_adc5_default
- &pinctrl_adc6_default &pinctrl_adc7_default>;
-};
-
-&adc1 {
- aspeed,int-vref-microvolt = <2500000>;
- status = "okay";
- pinctrl-0 = <&pinctrl_adc10_default>;
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&uhci {
- status = "okay";
-};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-minerva.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-minerva.dts
new file mode 100644
index 0000000..942e53d
--- /dev/null
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Minerva CMM";
+ compatible = "facebook,minerva-cmc", "aspeed,ast2600";
+
+ aliases {
+ serial5 = &uart5;
+ /*
+ * PCA9548 (2-0077) provides 8 channels connecting to
+ * 6 pcs of FCB (Fan Controller Board).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ };
+
+ chosen {
+ stdout-path = "serial5:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-fan-fault {
+ label = "led-fan-fault";
+ gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&uart6 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sgpiom0 {
+ status = "okay";
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ power-monitor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@67 {
+ compatible = "adi,ltc2945";
+ reg = <0x67>;
+ };
+
+ power-monitor@68 {
+ compatible = "adi,ltc2945";
+ reg = <0x68>;
+ };
+
+ leds_gpio: gpio@19 {
+ compatible = "nxp,pca9555";
+ reg = <0x19>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ pwm@5e{
+ compatible = "max31790";
+ reg = <0x5e>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ pwm@5e{
+ compatible = "max31790";
+ reg = <0x5e>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ pwm@5e{
+ compatible = "max31790";
+ reg = <0x5e>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ pwm@5e{
+ compatible = "max31790";
+ reg = <0x5e>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ pwm@5e{
+ compatible = "max31790";
+ reg = <0x5e>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ pwm@5e{
+ compatible = "max31790";
+ reg = <0x5e>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&i2c14 {
+ status = "okay";
+ multi-master;
+
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&adc0 {
+ aspeed,int-vref-microvolt = <2500000>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ aspeed,int-vref-microvolt = <2500000>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "","","","","BLADE_UART_SEL2","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","BLADE_UART_SEL0","","","",
+ /*M0-M7*/ "","","","","","BLADE_UART_SEL1","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","BAT_DETECT","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","BLADE_UART_SEL3","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+ gpio-line-names =
+ /*"input pin","output pin"*/
+ /*A0 - A7*/
+ "PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN",
+ "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN",
+ "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN",
+ "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN",
+ "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN",
+ "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN",
+ "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN",
+ "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN",
+ /*B0 - B7*/
+ "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN",
+ "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN",
+ "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN",
+ "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN",
+ "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN",
+ "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN",
+ "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN",
+ "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN",
+ /*C0 - C7*/
+ "PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN",
+ "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN",
+ "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN",
+ "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN",
+ "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN",
+ "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN",
+ "PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN",
+ "PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN",
+ /*D0 - D7*/
+ "PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN",
+ "PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN",
+ "PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE4_HSC_EN",
+ "PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE5_HSC_EN",
+ "PWRGD_MTIA_BLADE0_PWROK_L_BUF","PWREN_MTIA_BLADE6_HSC_EN",
+ "PWRGD_MTIA_BLADE1_PWROK_L_BUF","PWREN_MTIA_BLADE7_HSC_EN",
+ "PWRGD_MTIA_BLADE2_PWROK_L_BUF","PWREN_MTIA_BLADE8_HSC_EN",
+ "PWRGD_MTIA_BLADE3_PWROK_L_BUF","PWREN_MTIA_BLADE9_HSC_EN",
+ /*E0 - E7*/
+ "PWRGD_MTIA_BLADE4_PWROK_L_BUF","PWREN_MTIA_BLADE10_HSC_EN",
+ "PWRGD_MTIA_BLADE5_PWROK_L_BUF","PWREN_MTIA_BLADE11_HSC_EN",
+ "PWRGD_MTIA_BLADE6_PWROK_L_BUF","PWREN_MTIA_BLADE12_HSC_EN",
+ "PWRGD_MTIA_BLADE7_PWROK_L_BUF","PWREN_MTIA_BLADE13_HSC_EN",
+ "PWRGD_MTIA_BLADE8_PWROK_L_BUF","PWREN_MTIA_BLADE14_HSC_EN",
+ "PWRGD_MTIA_BLADE9_PWROK_L_BUF","PWREN_MTIA_BLADE15_HSC_EN",
+ "PWRGD_MTIA_BLADE10_PWROK_L_BUF","PWREN_NW_BLADE0_HSC_EN",
+ "PWRGD_MTIA_BLADE11_PWROK_L_BUF","PWREN_NW_BLADE1_HSC_EN",
+ /*F0 - F7*/
+ "PWRGD_MTIA_BLADE12_PWROK_L_BUF","PWREN_NW_BLADE2_HSC_EN",
+ "PWRGD_MTIA_BLADE13_PWROK_L_BUF","PWREN_NW_BLADE3_HSC_EN",
+ "PWRGD_MTIA_BLADE14_PWROK_L_BUF","PWREN_NW_BLADE4_HSC_EN",
+ "PWRGD_MTIA_BLADE15_PWROK_L_BUF","PWREN_NW_BLADE5_HSC_EN",
+ "PWRGD_NW_BLADE0_PWROK_L_BUF","PWREN_FCB_TOP_L_EN",
+ "PWRGD_NW_BLADE1_PWROK_L_BUF","PWREN_FCB_TOP_R_EN",
+ "PWRGD_NW_BLADE2_PWROK_L_BUF","PWREN_FCB_MIDDLE_L_EN",
+ "PWRGD_NW_BLADE3_PWROK_L_BUF","PWREN_FCB_MIDDLE_R_EN",
+ /*G0 - G7*/
+ "PWRGD_NW_BLADE4_PWROK_L_BUF","PWREN_FCB_BOTTOM_L_EN",
+ "PWRGD_NW_BLADE5_PWROK_L_BUF","PWREN_FCB_BOTTOM_R_EN",
+ "PWRGD_FCB_TOP_0_PWROK_L_BUF","FM_CMM_AC_CYCLE_N",
+ "PWRGD_FCB_TOP_1_PWROK_L_BUF","MGMT_SFP_TX_DIS",
+ "PWRGD_FCB_MIDDLE_0_PWROK_L_BUF","",
+ "PWRGD_FCB_MIDDLE_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE0_1_N",
+ "PWRGD_FCB_BOTTOM_0_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE2_3_N",
+ "PWRGD_FCB_BOTTOM_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE4_5_N",
+ /*H0 - H7*/
+ "LEAK_DETECT_MTIA_BLADE0_N_BUF","RST_I2CRST_MTIA_BLADE6_7_N",
+ "LEAK_DETECT_MTIA_BLADE1_N_BUF","RST_I2CRST_MTIA_BLADE8_9_N",
+ "LEAK_DETECT_MTIA_BLADE2_N_BUF","RST_I2CRST_MTIA_BLADE10_11_N",
+ "LEAK_DETECT_MTIA_BLADE3_N_BUF","RST_I2CRST_MTIA_BLADE12_13_N",
+ "LEAK_DETECT_MTIA_BLADE4_N_BUF","RST_I2CRST_MTIA_BLADE14_15_N",
+ "LEAK_DETECT_MTIA_BLADE5_N_BUF","RST_I2CRST_NW_BLADE0_1_2_N",
+ "LEAK_DETECT_MTIA_BLADE6_N_BUF","RST_I2CRST_NW_BLADE3_4_5_N",
+ "LEAK_DETECT_MTIA_BLADE7_N_BUF","RST_I2CRST_FCB_N",
+ /*I0 - I7*/
+ "LEAK_DETECT_MTIA_BLADE8_N_BUF","RST_I2CRST_FCB_B_L_N",
+ "LEAK_DETECT_MTIA_BLADE9_N_BUF","RST_I2CRST_FCB_B_R_N",
+ "LEAK_DETECT_MTIA_BLADE10_N_BUF","RST_I2CRST_FCB_M_L_N",
+ "LEAK_DETECT_MTIA_BLADE11_N_BUF","RST_I2CRST_FCB_M_R_N",
+ "LEAK_DETECT_MTIA_BLADE12_N_BUF","RST_I2CRST_FCB_T_L_N",
+ "LEAK_DETECT_MTIA_BLADE13_N_BUF","RST_I2CRST_FCB_T_R_N",
+ "LEAK_DETECT_MTIA_BLADE14_N_BUF","BMC_READY",
+ "LEAK_DETECT_MTIA_BLADE15_N_BUF","wFM_88E6393X_BIN_UPDATE_EN_N",
+ /*J0 - J7*/
+ "LEAK_DETECT_NW_BLADE0_N_BUF","WATER_VALVE_CLOSED_N",
+ "LEAK_DETECT_NW_BLADE1_N_BUF","",
+ "LEAK_DETECT_NW_BLADE2_N_BUF","",
+ "LEAK_DETECT_NW_BLADE3_N_BUF","",
+ "LEAK_DETECT_NW_BLADE4_N_BUF","",
+ "LEAK_DETECT_NW_BLADE5_N_BUF","",
+ "MTIA_BLADE0_STATUS_LED","",
+ "MTIA_BLADE1_STATUS_LED","",
+ /*K0 - K7*/
+ "MTIA_BLADE2_STATUS_LED","",
+ "MTIA_BLADE3_STATUS_LED","",
+ "MTIA_BLADE4_STATUS_LED","",
+ "MTIA_BLADE5_STATUS_LED","",
+ "MTIA_BLADE6_STATUS_LED","",
+ "MTIA_BLADE7_STATUS_LED","",
+ "MTIA_BLADE8_STATUS_LED","",
+ "MTIA_BLADE9_STATUS_LED","",
+ /*L0 - L7*/
+ "MTIA_BLADE10_STATUS_LED","",
+ "MTIA_BLADE11_STATUS_LED","",
+ "MTIA_BLADE12_STATUS_LED","",
+ "MTIA_BLADE13_STATUS_LED","",
+ "MTIA_BLADE14_STATUS_LED","",
+ "MTIA_BLADE15_STATUS_LED","",
+ "NW_BLADE0_STATUS_LED","",
+ "NW_BLADE1_STATUS_LED","",
+ /*M0 - M7*/
+ "NW_BLADE2_STATUS_LED","",
+ "NW_BLADE3_STATUS_LED","",
+ "NW_BLADE4_STATUS_LED","",
+ "NW_BLADE5_STATUS_LED","",
+ "RPU_READY","",
+ "IT_GEAR_RPU_LINK_N","",
+ "IT_GEAR_LEAK","",
+ "WATER_VALVE_CLOSED_N","",
+ /*N0 - N7*/
+ "VALVE_STS0","",
+ "VALVE_STS1","",
+ "VALVE_STS2","",
+ "VALVE_STS3","",
+ "CR_TOGGLE_BOOT_BUF_N","",
+ "CMM_LC_RDY_LED_N","",
+ "CMM_LC_UNRDY_LED_N","",
+ "CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
+ /*O0 - O7*/
+ "CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
+ "BOT_BCB_CABLE_PRSNT_N","",
+ "TOP_BCB_CABLE_PRSNT_N","",
+ "CHASSIS0_LEAK_Q_N","",
+ "CHASSIS1_LEAK_Q_N","",
+ "LEAK0_DETECT","",
+ "LEAK1_DETECT","",
+ "MGMT_SFP_PRSNT_N","",
+ /*P0 - P7*/
+ "MGMT_SFP_TX_FAULT","",
+ "MGMT_SFP_RX_LOS","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","";
+};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 64075cc..9847779 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -88,7 +88,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii3_default>;
use-ncsi;
- mlx,multi-host;
+ mellanox,multi-host;
};
&mac3 {
@@ -96,7 +96,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii4_default>;
use-ncsi;
- mlx,multi-host;
+ mellanox,multi-host;
};
&fmc {
@@ -369,7 +369,14 @@
&i2c13 {
status = "okay";
- bus-frequency = <400000>;
+ bus-frequency = <100000>;
+ multi-master;
+
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
};
&i2c14 {
@@ -596,7 +603,6 @@
};
&adc0 {
- ref_voltage = <2500>;
status = "okay";
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
&pinctrl_adc2_default &pinctrl_adc3_default
@@ -605,7 +611,6 @@
};
&adc1 {
- ref_voltage = <2500>;
status = "okay";
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts
index 6bf2ff8..5143f85 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-facebook-yosemitev2.dts
@@ -95,7 +95,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
use-ncsi;
- mlx,multi-host;
+ mellanox,multi-host;
};
&adc {
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts
index cad1b9a..6fdda42 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -488,7 +488,7 @@
#gpio-cells = <2>;
led@0 {
- label = "nvme0";
+ label = "nvme3";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
@@ -496,7 +496,7 @@
};
led@1 {
- label = "nvme1";
+ label = "nvme2";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
@@ -504,7 +504,7 @@
};
led@2 {
- label = "nvme2";
+ label = "nvme1";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
@@ -512,7 +512,7 @@
};
led@3 {
- label = "nvme3";
+ label = "nvme0";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
diff --git a/dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-system1.dts b/dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-system1.dts
new file mode 100644
index 0000000..dcbc163
--- /dev/null
+++ b/dts/upstream/src/arm/aspeed/aspeed-bmc-ibm-system1.dts
@@ -0,0 +1,1623 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "System1";
+ compatible = "ibm,system1-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c16 = &i2c8mux1chn0;
+ i2c17 = &i2c8mux1chn1;
+ i2c18 = &i2c8mux1chn2;
+ i2c19 = &i2c8mux1chn3;
+ i2c20 = &i2c8mux1chn4;
+ i2c21 = &i2c8mux1chn5;
+ i2c22 = &i2c8mux1chn6;
+ i2c23 = &i2c8mux1chn7;
+ i2c24 = &i2c3mux0chn0;
+ i2c25 = &i2c3mux0chn1;
+ i2c26 = &i2c3mux0chn2;
+ i2c27 = &i2c3mux0chn3;
+ i2c28 = &i2c3mux0chn4;
+ i2c29 = &i2c3mux0chn5;
+ i2c30 = &i2c3mux0chn6;
+ i2c31 = &i2c3mux0chn7;
+ i2c32 = &i2c6mux0chn0;
+ i2c33 = &i2c6mux0chn1;
+ i2c34 = &i2c6mux0chn2;
+ i2c35 = &i2c6mux0chn3;
+ i2c36 = &i2c6mux0chn4;
+ i2c37 = &i2c6mux0chn5;
+ i2c38 = &i2c6mux0chn6;
+ i2c39 = &i2c6mux0chn7;
+ i2c40 = &i2c7mux0chn0;
+ i2c41 = &i2c7mux0chn1;
+ i2c42 = &i2c7mux0chn2;
+ i2c43 = &i2c7mux0chn3;
+ i2c44 = &i2c7mux0chn4;
+ i2c45 = &i2c7mux0chn5;
+ i2c46 = &i2c7mux0chn6;
+ i2c47 = &i2c7mux0chn7;
+ i2c48 = &i2c8mux0chn0;
+ i2c49 = &i2c8mux0chn1;
+ i2c50 = &i2c8mux0chn2;
+ i2c51 = &i2c8mux0chn3;
+ i2c52 = &i2c8mux0chn4;
+ i2c53 = &i2c8mux0chn5;
+ i2c54 = &i2c8mux0chn6;
+ i2c55 = &i2c8mux0chn7;
+ i2c56 = &i2c14mux0chn0;
+ i2c57 = &i2c14mux0chn1;
+ i2c58 = &i2c14mux0chn2;
+ i2c59 = &i2c14mux0chn3;
+ i2c60 = &i2c14mux0chn4;
+ i2c61 = &i2c14mux0chn5;
+ i2c62 = &i2c14mux0chn6;
+ i2c63 = &i2c14mux0chn7;
+ i2c64 = &i2c15mux0chn0;
+ i2c65 = &i2c15mux0chn1;
+ i2c66 = &i2c15mux0chn2;
+ i2c67 = &i2c15mux0chn3;
+ i2c68 = &i2c15mux0chn4;
+ i2c69 = &i2c15mux0chn5;
+ i2c70 = &i2c15mux0chn6;
+ i2c71 = &i2c15mux0chn7;
+ };
+
+ chosen {
+ stdout-path = "uart5:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ eventlog: tcg-event-log@b3d00000 {
+ no-map;
+ reg = <0xb3d00000 0x100000>;
+ };
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b4000000 {
+ no-map;
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ no-map;
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-4 {
+ gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-8 {
+ gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-a {
+ gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-b {
+ gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-c {
+ gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-d {
+ gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-e {
+ gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-nvme0-presence {
+ label = "nvme0-presence";
+ gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+ linux,code = <0>;
+ };
+
+ event-nvme1-presence {
+ label = "nvme1-presence";
+ gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+ linux,code = <1>;
+ };
+
+ event-nvme2-presence {
+ label = "nvme2-presence";
+ gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+ linux,code = <2>;
+ };
+
+ event-nvme3-presence {
+ label = "nvme3-presence";
+ gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+ linux,code = <3>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
+ <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+ <&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
+ <&adc1 4>, <&adc0 2>, <&adc1 0>,
+ <&p2v5_aux_vd 0>, <&adc1 7>;
+ };
+
+ p12v_vd: voltage-divider1 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 3>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1127/127 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <15>;
+ full-ohms = <133>;
+ };
+
+ p5v_aux_vd: voltage-divider2 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 5>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1365/365 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <50>;
+ full-ohms = <187>;
+ };
+
+ p5v_bmc_aux_vd: voltage-divider3 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 3>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1365/365 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <50>;
+ full-ohms = <187>;
+ };
+
+ p3v3_aux_vd: voltage-divider4 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 2>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1698/698 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <14>;
+ full-ohms = <34>;
+ };
+
+ p3v3_bmc_aux_vd: voltage-divider5 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 7>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1698/698 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <14>;
+ full-ohms = <34>;
+ };
+
+ p1v8_bmc_aux_vd: voltage-divider6 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 6>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 4000/3000 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <3>;
+ full-ohms = <4>;
+ };
+
+ p2v5_aux_vd: voltage-divider7 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 1>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 2100/1100 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <11>;
+ full-ohms = <21>;
+ };
+
+ p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&adc0 {
+ status = "okay";
+ vref-supply = <&p1v8_bmc_aux>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ status = "okay";
+ vref-supply = <&p1v8_bmc_aux>;
+ aspeed,battery-sensing;
+
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","bmc-tpm-reset","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","bmc-ready",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","bmc-hb",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","power-chassis-good","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ regulator@60 {
+ compatible = "maxim,max8952";
+ reg = <0x60>;
+
+ max8952,default-mode = <0>;
+ max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+ <1050000>, <950000>;
+ max8952,sync-freq = <0>;
+ max8952,ramp-speed = <0>;
+
+ regulator-name = "VR_v77_1v4";
+ regulator-min-microvolt = <770000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ regulator@42 {
+ compatible = "infineon,ir38263";
+ reg = <0x42>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "nic1-perst";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "bmc-perst";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "reset-M2-SSD1-2-perst";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "pcie-perst1";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "pcie-perst2";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "pcie-perst3";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "pcie-perst4";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "pcie-perst5";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "pcie-perst6";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "pcie-perst7";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "pcie-perst8";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "PV-cp0-sw1stk4-perst";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "PV-cp0-sw1stk5-perst";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "pe-cp-drv0-perst";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "pe-cp-drv1-perst";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "lom-perst";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ gpio@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PLUG_DETECT_PCIE_J101_N",
+ "PLUG_DETECT_PCIE_J102_N",
+ "PLUG_DETECT_PCIE_J103_N",
+ "PLUG_DETECT_PCIE_J104_N",
+ "PLUG_DETECT_PCIE_J105_N",
+ "PLUG_DETECT_PCIE_J106_N",
+ "PLUG_DETECT_PCIE_J107_N",
+ "PLUG_DETECT_PCIE_J108_N",
+ "PLUG_DETECT_M2_SSD1_N",
+ "PLUG_DETECT_NIC1_N",
+ "SEL_SMB_DIMM_CPU0",
+ "presence-ps2",
+ "presence-ps3",
+ "", "",
+ "PWRBRD_PLUG_DETECT2_N";
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "ibm,cffps";
+ reg = <0x58>;
+ };
+
+ power-supply@59 {
+ compatible = "ibm,cffps";
+ reg = <0x59>;
+ };
+
+ power-supply@5a {
+ compatible = "ibm,cffps";
+ reg = <0x5a>;
+ };
+
+ power-supply@5b {
+ compatible = "ibm,cffps";
+ reg = <0x5b>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c3mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c3mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c3mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c3mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c3mux0chn4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c3mux0chn5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c3mux0chn6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c3mux0chn7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ regulator@42 {
+ compatible = "infineon,ir38263";
+ reg = <0x42>;
+ };
+
+ regulator@43 {
+ compatible = "infineon,ir38060";
+ reg = <0x43>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ fan-controller@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ };
+
+ fan-controller@54 {
+ compatible = "maxim,max31785a";
+ reg = <0x54>;
+ };
+
+ eeprom@55 {
+ compatible = "atmel,24c64";
+ reg = <0x55>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c6mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c6mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c6mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c6mux0chn4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ humidity-sensor@40 {
+ compatible = "ti,hdc1080";
+ reg = <0x40>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "enclosure-id-led";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "attention-led";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "enclosure-fault-rollup-led";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "power-on-led";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ temperature-sensor@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ };
+ };
+
+ i2c6mux0chn5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c6mux0chn6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c6mux0chn7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ pca3: gpio@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca4: gpio@77 {
+ compatible = "nxp,pca9539";
+ reg = <0x77>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PE_NVMED0_EXP_PRSNT_N",
+ "PE_NVMED1_EXP_PRSNT_N",
+ "PE_NVMED2_EXP_PRSNT_N",
+ "PE_NVMED3_EXP_PRSNT_N",
+ "LED_FAULT_NVMED0",
+ "LED_FAULT_NVMED1",
+ "LED_FAULT_NVMED2",
+ "LED_FAULT_NVMED3",
+ "FAN0_PRESENCE_R_N",
+ "FAN1_PRESENCE_R_N",
+ "FAN2_PRESENCE_R_N",
+ "FAN3_PRESENCE_R_N",
+ "FAN4_PRESENCE_R_N",
+ "FAN5_PRESENCE_N",
+ "FAN6_PRESENCE_N",
+ "";
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c7mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c7mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c7mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c7mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ regulator@58 {
+ compatible = "mps,mp2973";
+ reg = <0x58>;
+ };
+ };
+
+ i2c7mux0chn4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c7mux0chn5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ regulator@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ };
+ };
+
+ i2c7mux0chn6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c7mux0chn7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c8mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ regulator@58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ };
+ };
+
+ i2c8mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ regulator@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ };
+
+ regulator@41 {
+ compatible = "infineon,tda38640";
+ reg = <0x41>;
+ };
+
+ regulator@58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ };
+
+ regulator@5b {
+ compatible = "mps,mp2971";
+ reg = <0x5b>;
+ };
+ };
+
+ i2c8mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c8mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c8mux0chn4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c8mux1chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c8mux1chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c8mux1chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c8mux1chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c8mux1chn4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c8mux1chn5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c8mux1chn6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c8mux1chn7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+ };
+
+ i2c8mux0chn5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c8mux0chn6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+ };
+
+ i2c8mux0chn7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ regulator@40 {
+ compatible = "infineon,ir38060";
+ reg = <0x40>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ regulator@40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+ };
+
+ regulator@41 {
+ compatible = "infineon,ir38263";
+ reg = <0x41>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ regulator@60 {
+ compatible = "maxim,max8952";
+ reg = <0x60>;
+
+ max8952,default-mode = <0>;
+ max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+ <1050000>, <950000>;
+ max8952,sync-freq = <0>;
+ max8952,ramp-speed = <0>;
+
+ regulator-name = "VR_v77_1v4";
+ regulator-min-microvolt = <770000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&eventlog>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+
+ regulator@41 {
+ compatible = "infineon,ir38263";
+ reg = <0x41>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "efuse-12v-slots";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "efuse-3p3v-slot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "nic2-pert";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "pcie-perst9";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "pcie-perst10";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "pcie-perst11";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "pcie-perst12";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "pcie-perst13";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "pcie-perst14";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "pcie-perst15";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "pcie-perst16";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "PV-cp1-sw1stk4-perst";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "PV-cp1-sw1stk5-perst";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "pe-cp-drv2-perst";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "pe-cp-drv3-perst";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ gpio@75 {
+ compatible = "nxp,pca9539";
+ reg = <0x75>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PLUG_DETECT_PCIE_J109_N",
+ "PLUG_DETECT_PCIE_J110_N",
+ "PLUG_DETECT_PCIE_J111_N",
+ "PLUG_DETECT_PCIE_J112_N",
+ "PLUG_DETECT_PCIE_J113_N",
+ "PLUG_DETECT_PCIE_J114_N",
+ "PLUG_DETECT_PCIE_J115_N",
+ "PLUG_DETECT_PCIE_J116_N",
+ "PLUG_DETECT_M2_SSD2_N",
+ "PLUG_DETECT_NIC2_N",
+ "SEL_SMB_DIMM_CPU1",
+ "presence-ps0",
+ "presence-ps1",
+ "", "",
+ "PWRBRD_PLUG_DETECT1_N";
+ };
+
+ gpio@76 {
+ compatible = "nxp,pca9539";
+ reg = <0x76>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SW1_BOOTRCVRYB1_N",
+ "SW1_BOOTRCVRYB0_N",
+ "SW2_BOOTRCVRYB1_N",
+ "SW2_BOOTRCVRYB0_N",
+ "SW3_4_BOOTRCVRYB1_N",
+ "SW3_4_BOOTRCVRYB0_N",
+ "SW5_BOOTRCVRYB1_N",
+ "SW5_BOOTRCVRYB0_N",
+ "SW6_BOOTRCVRYB1_N",
+ "SW6_BOOTRCVRYB0_N",
+ "SW1_RESET_N",
+ "SW3_RESET_N",
+ "SW4_RESET_N",
+ "SW2_RESET_N",
+ "SW5_RESET_N",
+ "SW6_RESET_N";
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c14mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c14mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c14mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c14mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ regulator@58 {
+ compatible = "mps,mp2973";
+ reg = <0x58>;
+ };
+ };
+
+ i2c14mux0chn4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c14mux0chn5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ regulator@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ };
+ };
+
+ i2c14mux0chn6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c14mux0chn7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ regulator@58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ };
+ };
+
+ i2c15mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ regulator@40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ };
+
+ regulator@41 {
+ compatible = "infineon,tda38640";
+ reg = <0x41>;
+ };
+
+ regulator@58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ };
+
+ regulator@5b {
+ compatible = "mps,mp2971";
+ reg = <0x5b>;
+ };
+ };
+
+ i2c15mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c15mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c15mux0chn4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux1chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c15mux1chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c15mux1chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c15mux1chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c15mux1chn4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c15mux1chn5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c15mux1chn6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c15mux1chn7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+ };
+
+ i2c15mux0chn5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c15mux0chn6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+ };
+
+ i2c15mux0chn7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ regulator@40 {
+ compatible = "infineon,ir38060";
+ reg = <0x40>;
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
diff --git a/dts/upstream/src/arm/aspeed/aspeed-g6.dtsi b/dts/upstream/src/arm/aspeed/aspeed-g6.dtsi
index 29f9469..7fb4211 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-g6.dtsi
+++ b/dts/upstream/src/arm/aspeed/aspeed-g6.dtsi
@@ -867,22 +867,26 @@
};
fsim0: fsi@1e79b000 {
+ #interrupt-cells = <1>;
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b000 0x94>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi1_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ interrupt-controller;
status = "disabled";
};
fsim1: fsi@1e79b100 {
+ #interrupt-cells = <1>;
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b100 0x94>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi2_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ interrupt-controller;
status = "disabled";
};
diff --git a/dts/upstream/src/arm/aspeed/ibm-power10-dual.dtsi b/dts/upstream/src/arm/aspeed/ibm-power10-dual.dtsi
index cc46691..07ce3b2 100644
--- a/dts/upstream/src/arm/aspeed/ibm-power10-dual.dtsi
+++ b/dts/upstream/src/arm/aspeed/ibm-power10-dual.dtsi
@@ -165,10 +165,12 @@
};
fsi_hub0: hub@3400 {
+ #interrupt-cells = <1>;
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
+ interrupt-controller;
};
};
};
diff --git a/dts/upstream/src/arm/broadcom/bcm2711-rpi-4-b.dts b/dts/upstream/src/arm/broadcom/bcm2711-rpi-4-b.dts
index d5f8823..353bb50 100644
--- a/dts/upstream/src/arm/broadcom/bcm2711-rpi-4-b.dts
+++ b/dts/upstream/src/arm/broadcom/bcm2711-rpi-4-b.dts
@@ -5,6 +5,7 @@
#include "bcm283x-rpi-led-deprecated.dtsi"
#include "bcm283x-rpi-usb-peripheral.dtsi"
#include "bcm283x-rpi-wifi-bt.dtsi"
+#include <dt-bindings/leds/common.h>
/ {
compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
@@ -15,6 +16,13 @@
stdout-path = "serial1:115200n8";
};
+ cam1_reg: regulator-cam1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam1-reg";
+ enable-active-high;
+ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
sd_io_1v8_reg: regulator-sd-io-1v8 {
compatible = "regulator-gpio";
regulator-name = "vdd-sd-io";
@@ -197,6 +205,27 @@
phy1: ethernet-phy@1 {
/* No PHY interrupt */
reg = <0x1>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* LED1 */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ /* LED2 */
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
};
};
diff --git a/dts/upstream/src/arm/broadcom/bcm2711-rpi-400.dts b/dts/upstream/src/arm/broadcom/bcm2711-rpi-400.dts
index 5a2869a..ca9be91 100644
--- a/dts/upstream/src/arm/broadcom/bcm2711-rpi-400.dts
+++ b/dts/upstream/src/arm/broadcom/bcm2711-rpi-400.dts
@@ -30,6 +30,7 @@
&genet_mdio {
clock-frequency = <1950000>;
+ /delete-node/ leds;
};
&led_pwr {
diff --git a/dts/upstream/src/arm/broadcom/bcm2711-rpi-cm4-io.dts b/dts/upstream/src/arm/broadcom/bcm2711-rpi-cm4-io.dts
index d7ba02f..6bc77dd 100644
--- a/dts/upstream/src/arm/broadcom/bcm2711-rpi-cm4-io.dts
+++ b/dts/upstream/src/arm/broadcom/bcm2711-rpi-cm4-io.dts
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/leds/common.h>
#include "bcm2711-rpi-cm4.dtsi"
#include "bcm283x-rpi-led-deprecated.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
@@ -101,6 +102,38 @@
status = "okay";
};
+&i2c0_1 {
+ rtc@51 {
+ /* Attention: An alarm resets the machine */
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ quartz-load-femtofarads = <7000>;
+ };
+};
+
+&phy1 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* LED2 */
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ /* LED3 */
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+};
+
&led_act {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
};
diff --git a/dts/upstream/src/arm/broadcom/bcm2711-rpi.dtsi b/dts/upstream/src/arm/broadcom/bcm2711-rpi.dtsi
index d233a19..6bf4241 100644
--- a/dts/upstream/src/arm/broadcom/bcm2711-rpi.dtsi
+++ b/dts/upstream/src/arm/broadcom/bcm2711-rpi.dtsi
@@ -17,14 +17,33 @@
pcie0 = &pcie0;
blconfig = &blconfig;
};
-};
-&firmware {
- firmware_clocks: clocks {
- compatible = "raspberrypi,firmware-clocks";
- #clock-cells = <1>;
+ i2c0mux: i2c-mux0 {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&i2c0>;
+
+ pinctrl-names = "i2c0", "i2c0-vc";
+ pinctrl-0 = <&i2c0_gpio0>;
+ pinctrl-1 = <&i2c0_gpio44>;
+
+ i2c0_0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c0_1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
+};
+&firmware {
expgpio: gpio {
compatible = "raspberrypi,firmware-gpio";
gpio-controller;
@@ -54,6 +73,11 @@
clocks = <&firmware_clocks 4>;
};
+&i2c0 {
+ /delete-property/ pinctrl-names;
+ /delete-property/ pinctrl-0;
+};
+
&rmem {
/*
* RPi4's co-processor will copy the board's bootloader configuration
diff --git a/dts/upstream/src/arm/broadcom/bcm2711.dtsi b/dts/upstream/src/arm/broadcom/bcm2711.dtsi
index 22c7f15..e4e42af 100644
--- a/dts/upstream/src/arm/broadcom/bcm2711.dtsi
+++ b/dts/upstream/src/arm/broadcom/bcm2711.dtsi
@@ -432,8 +432,8 @@
};
};
- arm-pmu {
- compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -1114,6 +1114,14 @@
#address-cells = <2>;
};
+&csi0 {
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&csi1 {
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&cma {
/*
* arm64 reserves the CMA by default somewhere in ZONE_DMA32,
diff --git a/dts/upstream/src/arm/broadcom/bcm2835-rpi-common.dtsi b/dts/upstream/src/arm/broadcom/bcm2835-rpi-common.dtsi
index 4e7b4a5..8b3c21d 100644
--- a/dts/upstream/src/arm/broadcom/bcm2835-rpi-common.dtsi
+++ b/dts/upstream/src/arm/broadcom/bcm2835-rpi-common.dtsi
@@ -7,13 +7,6 @@
#include <dt-bindings/power/raspberrypi-power.h>
-&firmware {
- firmware_clocks: clocks {
- compatible = "raspberrypi,firmware-clocks";
- #clock-cells = <1>;
- };
-};
-
&hdmi {
clocks = <&firmware_clocks 9>,
<&firmware_clocks 13>;
diff --git a/dts/upstream/src/arm/broadcom/bcm2835-rpi.dtsi b/dts/upstream/src/arm/broadcom/bcm2835-rpi.dtsi
index f0acc93..e9bf41b 100644
--- a/dts/upstream/src/arm/broadcom/bcm2835-rpi.dtsi
+++ b/dts/upstream/src/arm/broadcom/bcm2835-rpi.dtsi
@@ -4,11 +4,12 @@
soc {
firmware: firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
-
mboxes = <&mailbox>;
- dma-ranges;
+
+ firmware_clocks: clocks {
+ compatible = "raspberrypi,firmware-clocks";
+ #clock-cells = <1>;
+ };
};
power: power {
@@ -25,6 +26,20 @@
};
};
+&csi0 {
+ clocks = <&clocks BCM2835_CLOCK_CAM0>,
+ <&firmware_clocks 4>;
+ clock-names = "lp", "vpu";
+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+};
+
+&csi1 {
+ clocks = <&clocks BCM2835_CLOCK_CAM1>,
+ <&firmware_clocks 4>;
+ clock-names = "lp", "vpu";
+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+};
+
&gpio {
gpioout: gpioout {
brcm,pins = <6>;
diff --git a/dts/upstream/src/arm/broadcom/bcm283x.dtsi b/dts/upstream/src/arm/broadcom/bcm283x.dtsi
index 2ca8a25..69b0919 100644
--- a/dts/upstream/src/arm/broadcom/bcm283x.dtsi
+++ b/dts/upstream/src/arm/broadcom/bcm283x.dtsi
@@ -454,6 +454,30 @@
status = "disabled";
};
+ csi0: csi@7e800000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e800000 0x800>,
+ <0x7e802000 0x4>;
+ reg-names = "unicam", "cmi";
+ interrupts = <2 6>;
+ brcm,num-data-lanes = <2>;
+ status = "disabled";
+ port {
+ };
+ };
+
+ csi1: csi@7e801000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e801000 0x800>,
+ <0x7e802004 0x4>;
+ reg-names = "unicam", "cmi";
+ interrupts = <2 7>;
+ brcm,num-data-lanes = <4>;
+ status = "disabled";
+ port {
+ };
+ };
+
i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
diff --git a/dts/upstream/src/arm/broadcom/bcm4709-asus-rt-ac3200.dts b/dts/upstream/src/arm/broadcom/bcm4709-asus-rt-ac3200.dts
new file mode 100644
index 0000000..53cb0c5
--- /dev/null
+++ b/dts/upstream/src/arm/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
+ model = "ASUS RT-AC3200";
+
+ memory@0 {
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x08000000>;
+ device_type = "memory";
+ };
+
+ nvram@1c080000 {
+ compatible = "brcm,nvram";
+ reg = <0x1c080000 0x00180000>;
+
+ et0macaddr: et0macaddr {
+ #nvmem-cell-cells = <1>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wifi {
+ label = "Wi-Fi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-power {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-wan-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-wps {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_WPS;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&et0macaddr 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ nvmem-cells = <&et0macaddr 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+ nvmem-cells = <&et0macaddr 2>;
+ nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x00000000 0x00080000>;
+ label = "boot";
+ read-only;
+ };
+
+ partition@80000 {
+ reg = <0x00080000 0x00180000>;
+ label = "nvram";
+ };
+
+ partition@200000 {
+ compatible = "brcm,trx";
+ reg = <0x00200000 0x07e00000>;
+ label = "firmware";
+ };
+ };
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ label = "wan";
+ };
+
+ port@1 {
+ label = "lan1";
+ };
+
+ port@2 {
+ label = "lan2";
+ };
+
+ port@3 {
+ label = "lan3";
+ };
+
+ port@4 {
+ label = "lan4";
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts b/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts
index 5f08930..1655ac9 100644
--- a/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts
+++ b/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts
@@ -13,11 +13,22 @@
nvram@1c080000 {
et0macaddr: et0macaddr {
+ #nvmem-cell-cells = <1>;
};
};
};
&gmac0 {
- nvmem-cells = <&et0macaddr>;
+ nvmem-cells = <&et0macaddr 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ nvmem-cells = <&et0macaddr 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+ nvmem-cells = <&et0macaddr 2>;
nvmem-cell-names = "mac-address";
};
diff --git a/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi b/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi
index 09cefce..2cfaaab 100644
--- a/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi
+++ b/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -6,15 +6,13 @@
#include "bcm47094.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
-/ {
- chosen {
- bootargs = "earlycon";
- };
+#include <dt-bindings/leds/common.h>
+/ {
memory@0 {
- device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x18000000>;
+ device_type = "memory";
};
nvram@1c080000 {
@@ -22,76 +20,108 @@
reg = <0x1c080000 0x00180000>;
};
- leds {
- compatible = "gpio-leds";
+ gpio-keys {
+ compatible = "gpio-keys";
- led-power {
- label = "white:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
+ button-led {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
- led-wan-red {
- label = "red:wan";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ button-reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wifi {
+ label = "Wi-Fi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
};
+ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
led-lan {
- label = "white:lan";
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
};
+ led-power {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
led-usb2 {
- label = "white:usb2";
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_USB;
+ function-enumerator = <1>;
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
trigger-sources = <&ehci_port2>;
linux,default-trigger = "usbport";
};
led-usb3 {
- label = "white:usb3";
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_USB;
+ function-enumerator = <2>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
trigger-sources = <&ehci_port1>, <&xhci_port1>;
linux,default-trigger = "usbport";
};
+ led-wan-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ };
+
led-wps {
- label = "white:wps";
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_WPS;
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
};
};
+};
- gpio-keys {
- compatible = "gpio-keys";
-
- button-wps {
- label = "WPS";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
- };
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- button-reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ partition@0 {
+ reg = <0x00000000 0x00080000>;
+ label = "boot";
+ read-only;
};
- button-wifi {
- label = "Wi-Fi";
- linux,code = <KEY_RFKILL>;
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ partition@80000 {
+ reg = <0x00080000 0x00180000>;
+ label = "nvram";
};
- button-led {
- label = "Backlight";
- linux,code = <KEY_BRIGHTNESS_ZERO>;
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ partition@200000 {
+ compatible = "brcm,trx";
+ reg = <0x00200000 0x07e00000>;
+ label = "firmware";
};
};
};
&srab {
- compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
status = "okay";
ports {
@@ -136,28 +166,3 @@
&usb3_phy {
status = "okay";
};
-
-&nandcs {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
-
- partition@80000 {
- label = "nvram";
- reg = <0x00080000 0x00180000>;
- };
-
- partition@200000 {
- label = "firmware";
- reg = <0x00200000 0x07e00000>;
- compatible = "brcm,trx";
- };
- };
-};
diff --git a/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac5300.dts b/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac5300.dts
new file mode 100644
index 0000000..6c666dc
--- /dev/null
+++ b/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708";
+ model = "ASUS RT-AC5300";
+
+ memory@0 {
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x18000000>;
+ device_type = "memory";
+ };
+
+ nvram@1c080000 {
+ compatible = "brcm,nvram";
+ reg = <0x1c080000 0x00180000>;
+
+ et1macaddr: et1macaddr {
+ #nvmem-cell-cells = <1>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wifi {
+ label = "Wi-Fi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-lan {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+ };
+
+ led-power {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-wan-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-wps {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_WPS;
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&et1macaddr 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ nvmem-cells = <&et1macaddr 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+ nvmem-cells = <&et1macaddr 2>;
+ nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x00000000 0x00080000>;
+ label = "boot";
+ read-only;
+ };
+
+ partition@80000 {
+ reg = <0x00080000 0x00180000>;
+ label = "nvram";
+ };
+
+ partition@200000 {
+ compatible = "brcm,trx";
+ reg = <0x00200000 0x07e00000>;
+ label = "firmware";
+ };
+ };
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ label = "lan4";
+ };
+
+ port@1 {
+ label = "lan3";
+ };
+
+ port@2 {
+ label = "lan2";
+ };
+
+ port@3 {
+ label = "lan1";
+ };
+
+ port@4 {
+ label = "wan";
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts b/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts
index fd344b5..a197f44 100644
--- a/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts
+++ b/dts/upstream/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -13,18 +13,40 @@
nvram@1c080000 {
et1macaddr: et1macaddr {
+ #nvmem-cell-cells = <1>;
};
};
switch {
compatible = "realtek,rtl8365mb";
- /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
realtek,disable-leds;
dsa,member = <1 0>;
+ mdio {
+ compatible = "realtek,smi-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -68,29 +90,21 @@
};
};
};
+ };
+};
- mdio {
- compatible = "realtek,smi-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
+&gmac0 {
+ status = "disabled";
+};
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
+&gmac1 {
+ nvmem-cells = <&et1macaddr 0>;
+ nvmem-cell-names = "mac-address";
+};
- ethphy3: ethernet-phy@3 {
- reg = <3>;
- };
- };
- };
+&gmac2 {
+ nvmem-cells = <&et1macaddr 1>;
+ nvmem-cell-names = "mac-address";
};
&srab {
@@ -111,12 +125,3 @@
};
};
};
-
-&gmac0 {
- status = "disabled";
-};
-
-&gmac1 {
- nvmem-cells = <&et1macaddr>;
- nvmem-cell-names = "mac-address";
-};
diff --git a/dts/upstream/src/arm/nvidia/tegra20-colibri.dtsi b/dts/upstream/src/arm/nvidia/tegra20-colibri.dtsi
index 8c1d5c9..2ff7be8 100644
--- a/dts/upstream/src/arm/nvidia/tegra20-colibri.dtsi
+++ b/dts/upstream/src/arm/nvidia/tegra20-colibri.dtsi
@@ -445,9 +445,9 @@
tegra_ac97: ac97@70002000 {
status = "okay";
- nvidia,codec-reset-gpio =
+ nvidia,codec-reset-gpios =
<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
- nvidia,codec-sync-gpio =
+ nvidia,codec-sync-gpios =
<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
};
diff --git a/dts/upstream/src/arm/nvidia/tegra20-paz00.dts b/dts/upstream/src/arm/nvidia/tegra20-paz00.dts
index afb922b..1408e1e 100644
--- a/dts/upstream/src/arm/nvidia/tegra20-paz00.dts
+++ b/dts/upstream/src/arm/nvidia/tegra20-paz00.dts
@@ -533,6 +533,49 @@
0x00000000 0x00000000 0x00000000 0x00000000>;
};
};
+
+ emc-tables@1 {
+ nvidia,ram-code = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ emc-table@166500 {
+ reg = <166500>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <166500>;
+ nvidia,emc-registers = <0x0000000a 0x00000016
+ 0x00000008 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000c 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x000004df
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x0000000a 0x000000c8
+ 0x00000003 0x00000006 0x00000004 0x00000008
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xe03b0323
+ 0x007fe010 0x00001414 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+
+ emc-table@333000 {
+ reg = <333000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <333000>;
+ nvidia,emc-registers = <0x00000018 0x00000033
+ 0x00000012 0x00000004 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000bff
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x00000008
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xf0440303
+ 0x007fe010 0x00001414 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ };
};
usb@c5000000 {
diff --git a/dts/upstream/src/arm/nxp/imx/e60k02.dtsi b/dts/upstream/src/arm/nxp/imx/e60k02.dtsi
index dd03e38..13756d3 100644
--- a/dts/upstream/src/arm/nxp/imx/e60k02.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/e60k02.dtsi
@@ -127,7 +127,7 @@
compatible = "ricoh,rc5t619";
reg = <0x32>;
interrupt-parent = <&gpio5>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
system-power-controller;
regulators {
diff --git a/dts/upstream/src/arm/nxp/imx/e70k02.dtsi b/dts/upstream/src/arm/nxp/imx/e70k02.dtsi
index 4e1bf08..dcc3c9d 100644
--- a/dts/upstream/src/arm/nxp/imx/e70k02.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/e70k02.dtsi
@@ -145,7 +145,7 @@
compatible = "ricoh,rc5t619";
reg = <0x32>;
interrupt-parent = <&gpio4>;
- interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
system-power-controller;
regulators {
diff --git a/dts/upstream/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/dts/upstream/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi
index abc9233..31b3fc9 100644
--- a/dts/upstream/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi
@@ -15,6 +15,22 @@
device_type = "memory";
reg = <0xa0000000 0x08000000>; /* 128MB */
};
+
+ usbotgphy: usbotgphy {
+ compatible = "usb-nop-xceiv";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotgphy>;
+ reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ #phy-cells = <0>;
+ };
+
+ usbh2phy: usbh2phy {
+ compatible = "usb-nop-xceiv";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2phy>;
+ reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ #phy-cells = <0>;
+ };
};
&cspi1 {
@@ -84,6 +100,52 @@
MX27_PAD_NFWE_B__NFWE_B 0x0
>;
};
+
+ pinctrl_usbotgphy: usbotgphygrp {
+ fsl,pins = <
+ MX27_PAD_USBH1_RCV__GPIO2_25 0x1 /* reset gpio */
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+ MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+ MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+ MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+ MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+ MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+ MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+ MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+ MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+ MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+ MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+ MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+ >;
+ };
+
+ pinctrl_usbh2phy: usbh2phygrp {
+ fsl,pins = <
+ MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 /* reset gpio */
+ >;
+ };
+
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+ MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+ MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+ MX27_PAD_USBH2_STP__USBH2_STP 0x0
+ MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+ MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+ MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+ MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+ MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+ MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+ MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+ MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+ >;
+ };
};
};
@@ -95,3 +157,19 @@
nand-on-flash-bbt;
status = "okay";
};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "ulpi";
+ phys = <&usbotgphy>;
+ status = "okay";
+};
+
+&usbh2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2>;
+ phy_type = "ulpi";
+ phys = <&usbh2phy>;
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts b/dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts
index f740872..2bd0761 100644
--- a/dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts
@@ -45,7 +45,7 @@
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 78770>;
+ pwms = <&pwm1 0 78770 0>;
brightness-levels = <0 150 200 255>;
default-brightness-level = <1>;
power-supply = <&backlight_reg>;
@@ -113,7 +113,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm_backlight>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-kp-ddc.dts b/dts/upstream/src/arm/nxp/imx/imx53-kp-ddc.dts
index 0e7f071..f6f1163 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-kp-ddc.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx53-kp-ddc.dts
@@ -13,7 +13,7 @@
backlight_lcd: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 50000>;
+ pwms = <&pwm2 0 50000 0>;
power-supply = <&reg_backlight>;
brightness-levels = <0 24 28 32 36
40 44 48 52 56
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-kp.dtsi b/dts/upstream/src/arm/nxp/imx/imx53-kp.dtsi
index 4508f34..ae5f87b 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-kp.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx53-kp.dtsi
@@ -13,7 +13,7 @@
compatible = "pwm-beeper";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_buzzer>;
- pwms = <&pwm1 0 500000>;
+ pwms = <&pwm1 0 500000 0>;
};
gpio-buttons {
@@ -162,14 +162,6 @@
>;
};
-&pwm1 {
- #pwm-cells = <2>;
-};
-
-&pwm2 {
- #pwm-cells = <2>;
-};
-
&uart1 {
status = "okay";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts b/dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts
index c323b4d..1353d98 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts
@@ -41,7 +41,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 3000>;
+ pwms = <&pwm1 0 3000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_backlight>;
@@ -313,7 +313,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-mba53.dts b/dts/upstream/src/arm/nxp/imx/imx53-mba53.dts
index 6a37616..2117de8 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-mba53.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx53-mba53.dts
@@ -17,7 +17,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 50000>;
+ pwms = <&pwm2 0 50000 0>;
brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
default-brightness-level = <10>;
enable-gpios = <&gpio7 7 0>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-ppd.dts b/dts/upstream/src/arm/nxp/imx/imx53-ppd.dts
index 70c4a48..e939acc 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-ppd.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx53-ppd.dts
@@ -167,7 +167,7 @@
pwm_bl: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 50000>;
+ pwms = <&pwm2 0 50000 0>;
brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
38 40 43 45 48 51 53 56 58 61 63 66 68 71
73 76 79 81 84 86 89 91 94 96 99 102 104
@@ -187,7 +187,7 @@
led-1 {
label = "alarm-brightness";
- pwms = <&pwm1 0 100000>;
+ pwms = <&pwm1 0 100000 0>;
max-brightness = <255>;
};
};
@@ -628,14 +628,12 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-qsb-common.dtsi b/dts/upstream/src/arm/nxp/imx/imx53-qsb-common.dtsi
index d804404..05d7a46 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-qsb-common.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx53-qsb-common.dtsi
@@ -85,7 +85,7 @@
};
};
- panel {
+ panel_dpi: panel {
compatible = "sii,43wvf1g";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_display_power>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-qsb-hdmi.dtso b/dts/upstream/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
index c84e9b0..151e9ce 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
+++ b/dts/upstream/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
@@ -10,8 +10,6 @@
/plugin/;
&{/} {
- /delete-node/ panel;
-
hdmi: connector-hdmi {
compatible = "hdmi-connector";
label = "hdmi";
@@ -82,6 +80,10 @@
};
};
+&panel_dpi {
+ status = "disabled";
+};
+
&tve {
status = "disabled";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-tqma53.dtsi b/dts/upstream/src/arm/nxp/imx/imx53-tqma53.dtsi
index 294811b..b2d7271 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-tqma53.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx53-tqma53.dtsi
@@ -202,14 +202,6 @@
};
};
-&pwm1 {
- #pwm-cells = <2>;
-};
-
-&pwm2 {
- #pwm-cells = <2>;
-};
-
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
index cc861a4..a5ac793 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
@@ -14,7 +14,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
@@ -79,6 +79,5 @@
};
&pwm1 {
- #pwm-cells = <2>;
status = "okay";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
index b6cb788..5a25bdb 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
@@ -49,7 +49,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 3000>;
+ pwms = <&pwm3 0 3000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
pinctrl-names = "default";
@@ -69,6 +69,5 @@
};
&pwm3 {
- #pwm-cells = <2>;
status = "okay";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-mamoj.dts b/dts/upstream/src/arm/nxp/imx/imx6dl-mamoj.dts
index 0289519..72ee236 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6dl-mamoj.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-mamoj.dts
@@ -21,7 +21,7 @@
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+ pwms = <&pwm3 0 25000 0>; /* 25000ns -> 40kHz */
brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
default-brightness-level = <7>;
};
@@ -303,7 +303,6 @@
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-ba16.dtsi b/dts/upstream/src/arm/nxp/imx/imx6q-ba16.dtsi
index f266f1b..09d9ca0 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6q-ba16.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-ba16.dtsi
@@ -55,7 +55,7 @@
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_display>;
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
@@ -349,7 +349,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-bosch-acc.dts b/dts/upstream/src/arm/nxp/imx/imx6q-bosch-acc.dts
index 0264880..d3f14b4 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6q-bosch-acc.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-bosch-acc.dts
@@ -36,7 +36,7 @@
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 200000>;
+ pwms = <&pwm1 0 200000 0>;
brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
num-interpolated-steps = <10>;
default-brightness-level = <60>;
@@ -117,14 +117,14 @@
color = <LED_COLOR_ID_RED>;
max-brightness = <248>;
default-state = "off";
- pwms = <&pwm2 0 500000>;
+ pwms = <&pwm2 0 500000 0>;
};
led_white: led-1 {
color = <LED_COLOR_ID_WHITE>;
max-brightness = <248>;
default-state = "off";
- pwms = <&pwm3 0 500000>;
+ pwms = <&pwm3 0 500000 0>;
linux,default-trigger = "heartbeat";
};
};
@@ -484,28 +484,24 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-kp.dtsi b/dts/upstream/src/arm/nxp/imx/imx6q-kp.dtsi
index 091903f..c425d42 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6q-kp.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-kp.dtsi
@@ -15,7 +15,7 @@
/ {
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 255>;
num-interpolated-steps = <255>;
default-brightness-level = <250>;
@@ -23,7 +23,7 @@
beeper {
compatible = "pwm-beeper";
- pwms = <&pwm2 0 500000>;
+ pwms = <&pwm2 0 500000 0>;
};
lcd_display: display {
@@ -378,14 +378,12 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-novena.dts b/dts/upstream/src/arm/nxp/imx/imx6q-novena.dts
index a7d5a68..d392b5b 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6q-novena.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-novena.dts
@@ -67,7 +67,7 @@
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 10000000>;
+ pwms = <&pwm1 0 10000000 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight_novena>;
power-supply = <&reg_lvds_lcd>;
@@ -465,7 +465,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
status = "okay";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-pistachio.dts b/dts/upstream/src/arm/nxp/imx/imx6q-pistachio.dts
index 46c6b96..56b77cc 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6q-pistachio.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-pistachio.dts
@@ -124,7 +124,7 @@
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 50000>;
+ pwms = <&pwm1 0 50000 0>;
brightness-levels = <
0 /*1 2 3 4 5 6*/ 7 8 9
10 11 12 13 14 15 16 17 18 19
@@ -571,7 +571,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-prti6q.dts b/dts/upstream/src/arm/nxp/imx/imx6q-prti6q.dts
index 3508a2c..a7d5693 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6q-prti6q.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-prti6q.dts
@@ -22,7 +22,7 @@
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 16 64 255>;
num-interpolated-steps = <16>;
default-brightness-level = <1>;
@@ -292,7 +292,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-var-dt6customboard.dts b/dts/upstream/src/arm/nxp/imx/imx6q-var-dt6customboard.dts
index 2290c12..0225a62 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6q-var-dt6customboard.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-var-dt6customboard.dts
@@ -18,7 +18,7 @@
backlight_lvds: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 50000>;
+ pwms = <&pwm2 0 50000 0>;
brightness-levels = <0 4 8 16 32 64 128 248>;
default-brightness-level = <7>;
status = "okay";
@@ -203,7 +203,6 @@
};
&pwm2 {
- #pwm-cells = <2>;
status = "okay";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi
index 338d292..3a46ade 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi
@@ -13,7 +13,7 @@
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 191000>;
+ pwms = <&pwm3 0 191000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <0>;
power-supply = <&reg_5v>;
@@ -212,7 +212,6 @@
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi
index db1bc51..758eaf9 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -46,7 +46,7 @@
/ {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
@@ -346,7 +346,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi
index 1e530d8..761566a 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -64,7 +64,7 @@
active-low;
label = "imx6:red:front";
max-brightness = <248>;
- pwms = <&pwm1 0 50000>;
+ pwms = <&pwm1 0 50000 0>;
};
};
@@ -233,7 +233,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
status = "okay";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-emcon.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-emcon.dtsi
index 42b2ba2..a308a35 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-emcon.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-emcon.dtsi
@@ -66,7 +66,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lvds_bl>;
enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm1 0 50000>;
+ pwms = <&pwm1 0 50000 0>;
brightness-levels = <
0 4 8 16 32 64 80 96 112
128 144 160 176 250
@@ -78,7 +78,7 @@
pwm_fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
- pwms = <&pwm4 0 50000>;
+ pwms = <&pwm4 0 50000 0>;
cooling-levels = <0 64 127 191 255>;
status = "disabled";
};
@@ -145,7 +145,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgb_bl>;
enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm3 0 5000000>;
+ pwms = <&pwm3 0 5000000 0>;
brightness-levels = <
250 176 160 144 128 112
96 80 64 48 32 16 8 1
@@ -736,17 +736,14 @@
};
&pwm1 {
- #pwm-cells = <2>;
status = "okay";
};
&pwm3 {
- #pwm-cells = <2>;
status = "okay";
};
&pwm4 {
- #pwm-cells = <2>;
status = "okay";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
index 535679c..48ffb3e 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -25,7 +25,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
@@ -520,7 +520,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
index 3e1c572..1eae438 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -25,7 +25,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
@@ -517,7 +517,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
index 0ffa035..c2ec857 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -26,7 +26,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
@@ -570,7 +570,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default", "state_dio";
pinctrl-0 = <&pinctrl_pwm4_backlight>;
pinctrl-1 = <&pinctrl_pwm4_dio>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
index 46cf408..7cee983 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
@@ -66,7 +66,7 @@
backlight-display {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <
0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
@@ -619,7 +619,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
index a74cde0..fbc704c 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
@@ -56,7 +56,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <
0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
@@ -502,7 +502,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
index 1e72380..0705062 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
@@ -70,7 +70,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
@@ -586,7 +586,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-icore.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-icore.dtsi
index efe1152..9975b6e 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-icore.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-icore.dtsi
@@ -20,7 +20,7 @@
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 100000>;
+ pwms = <&pwm3 0 100000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
@@ -245,7 +245,6 @@
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6.dtsi
index 4d2abcd..60aa1e9 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6.dtsi
@@ -298,6 +298,7 @@
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ vdd-supply = <&reg_mba6_3p3v>;
ethernet@1 {
compatible = "usb424,9e00";
@@ -441,8 +442,6 @@
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
-
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi
index f2542d7..a30cf0d 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -108,7 +108,7 @@
backlight-lcd {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -117,7 +117,7 @@
backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -499,7 +499,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
@@ -512,7 +511,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi
index 32a110a..33174fe 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -183,7 +183,7 @@
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -192,7 +192,7 @@
backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -201,7 +201,7 @@
backlight_lvds1: backlight-lvds1 {
compatible = "pwm-backlight";
- pwms = <&pwm2 0 5000000>;
+ pwms = <&pwm2 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -735,14 +735,12 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
@@ -755,7 +753,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index 414196b..8e64314 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -17,7 +17,7 @@
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -26,7 +26,7 @@
backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -641,7 +641,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
@@ -654,7 +653,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi
index f278b14..1211772 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -134,7 +134,7 @@
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -143,7 +143,7 @@
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -596,7 +596,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
@@ -609,7 +608,6 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi
index 1ca4d21..0b4c09b 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -15,7 +15,7 @@
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_backlight>;
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
status = "okay";
};
@@ -224,7 +224,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
index 68e9718..6656e2e 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -144,8 +144,8 @@
};
sound-spdif {
- compatible = "fsl,imx-audio-spdif",
- "fsl,imx-sabreauto-spdif";
+ compatible = "fsl,imx-sabreauto-spdif",
+ "fsl,imx-audio-spdif";
model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-in;
@@ -153,7 +153,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 5000000>;
+ pwms = <&pwm3 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
status = "okay";
@@ -802,7 +802,6 @@
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi
index 84c8a95..9c502bf 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -99,7 +99,7 @@
#clock-cells = <0>;
clock-frequency = <22000000>;
clock-output-names = "mipi_pwm3";
- pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
+ pwms = <&pwm3 0 45 0>; /* 1 / 45 ns = 22 MHz */
status = "okay";
};
@@ -162,7 +162,7 @@
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -171,7 +171,7 @@
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_3p3v>;
@@ -654,21 +654,18 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-sabresd.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-sabresd.dtsi
index 4fe5876..8f4f5fb 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-sabresd.dtsi
@@ -119,7 +119,7 @@
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
status = "okay";
@@ -755,7 +755,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-savageboard.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-savageboard.dtsi
index 02e6d36..6823a63 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-savageboard.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-savageboard.dtsi
@@ -83,7 +83,7 @@
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <4>;
power-supply = <&reg_3p3v>;
- pwms = <&pwm1 0 10000>;
+ pwms = <&pwm1 0 10000 0>;
};
reg_3p3v: regulator-3p3v {
@@ -140,7 +140,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
index d59d5d0..6ab71a7 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -282,7 +282,6 @@
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
- #pwm-cells = <2>;
status = "okay";
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-udoo.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-udoo.dtsi
index 647ba5e..14272b4 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-udoo.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-udoo.dtsi
@@ -59,16 +59,6 @@
};
};
- reg_usb_h1_vbus: regulator-usb-h1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
- gpio = <&gpio7 12 0>;
- };
-
reg_panel: regulator-panel {
compatible = "regulator-fixed";
regulator-name = "lcd_panel";
@@ -285,9 +275,18 @@
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh>;
- vbus-supply = <&reg_usb_h1_vbus>;
- clocks = <&clks IMX6QDL_CLK_CKO>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb-port@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ };
};
&usbotg {
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl.dtsi
index 8431b8a..d2200c9 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl.dtsi
@@ -397,11 +397,10 @@
reg = <0x02024000 0x4000>;
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
- <&clks IMX6QDL_CLK_ESAI_MEM>,
<&clks IMX6QDL_CLK_ESAI_EXTAL>,
<&clks IMX6QDL_CLK_ESAI_IPG>,
<&clks IMX6QDL_CLK_SPBA>;
- clock-names = "core", "mem", "extal", "fsys", "spba";
+ clock-names = "core", "extal", "fsys", "spba";
dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
dma-names = "rx", "tx";
status = "disabled";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6sl-evk.dts b/dts/upstream/src/arm/nxp/imx/imx6sl-evk.dts
index 239bc6d..31eee04 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6sl-evk.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6sl-evk.dts
@@ -23,7 +23,7 @@
backlight_display: backlight_display {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
@@ -584,10 +584,8 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
};
&reg_vdd1p1 {
diff --git a/dts/upstream/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts b/dts/upstream/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
index 5636fb3..03d6965 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -138,7 +138,7 @@
pinctrl-0 = <&pinctrl_zforce>;
reg = <0x50>;
interrupt-parent = <&gpio5>;
- interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&ldo1_reg>;
reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <1072>;
@@ -163,7 +163,7 @@
pinctrl-0 = <&pinctrl_ricoh_gpio>;
reg = <0x32>;
interrupt-parent = <&gpio5>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
system-power-controller;
regulators {
diff --git a/dts/upstream/src/arm/nxp/imx/imx6sll-evk.dts b/dts/upstream/src/arm/nxp/imx/imx6sll-evk.dts
index e3e9b0e..febc2dd 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6sll-evk.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6sll-evk.dts
@@ -26,7 +26,7 @@
backlight_display: backlight-display {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -314,10 +314,8 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
};
&snvs_poweroff {
diff --git a/dts/upstream/src/arm/nxp/imx/imx6sll.dtsi b/dts/upstream/src/arm/nxp/imx/imx6sll.dtsi
index 3659fd5..ddeb5b3 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6sll.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6sll.dtsi
@@ -683,7 +683,6 @@
clocks = <&clks IMX6SLL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
- fsl,anatop = <&anatop>;
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts b/dts/upstream/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts
index cd9cbc9..1c1515a 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts
@@ -18,7 +18,7 @@
backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_3p3v>;
@@ -83,7 +83,7 @@
sound {
compatible = "fsl,imx-audio-sgtl5000";
model = "imx6sx-nitrogen6sx-sgtl5000";
- cpu-dai = <&ssi1>;
+ ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
@@ -229,10 +229,8 @@
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
- status = "okay";
};
&ssi1 {
diff --git a/dts/upstream/src/arm/nxp/imx/imx6sx-sdb.dtsi b/dts/upstream/src/arm/nxp/imx/imx6sx-sdb.dtsi
index c6e85e4..7d4170c 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6sx-sdb.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6sx-sdb.dtsi
@@ -23,7 +23,7 @@
backlight_display: backlight-display {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 5000000>;
+ pwms = <&pwm3 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
@@ -184,8 +184,8 @@
};
sound-spdif {
- compatible = "fsl,imx-audio-spdif",
- "fsl,imx6sx-sdb-spdif";
+ compatible = "fsl,imx6sx-sdb-spdif",
+ "fsl,imx-audio-spdif";
model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-out;
@@ -295,10 +295,8 @@
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
- status = "okay";
};
&snvs_poweroff {
diff --git a/dts/upstream/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts b/dts/upstream/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts
index bfcd8f7..f999eb2 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts
@@ -46,19 +46,19 @@
led-1 {
label = "red";
max-brightness = <255>;
- pwms = <&pwm6 0 50000>;
+ pwms = <&pwm6 0 50000 0>;
};
led-2 {
label = "green";
max-brightness = <255>;
- pwms = <&pwm2 0 50000>;
+ pwms = <&pwm2 0 50000 0>;
};
led-3 {
label = "blue";
max-brightness = <255>;
- pwms = <&pwm1 0 50000>;
+ pwms = <&pwm1 0 50000 0>;
};
};
};
@@ -505,24 +505,18 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
};
&pwm2 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
- status = "okay";
};
&pwm6 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
- status = "okay";
};
&reg_arm {
diff --git a/dts/upstream/src/arm/nxp/imx/imx6sx.dtsi b/dts/upstream/src/arm/nxp/imx/imx6sx.dtsi
index 0de359d..b386448 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6sx.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6sx.dtsi
@@ -339,15 +339,14 @@
};
esai: esai@2024000 {
- compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
+ compatible = "fsl,imx35-esai";
reg = <0x02024000 0x4000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
- <&clks IMX6SX_CLK_ESAI_MEM>,
<&clks IMX6SX_CLK_ESAI_EXTAL>,
<&clks IMX6SX_CLK_ESAI_IPG>,
<&clks IMX6SX_CLK_SPBA>;
- clock-names = "core", "mem", "extal",
+ clock-names = "core", "extal",
"fsys", "spba";
dmas = <&sdma 23 21 0>,
<&sdma 24 21 0>;
@@ -929,7 +928,6 @@
clocks = <&clks IMX6SX_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
- fsl,anatop = <&anatop>;
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
@@ -957,7 +955,6 @@
fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc 2>;
phy_type = "hsic";
- fsl,anatop = <&anatop>;
dr_mode = "host";
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi b/dts/upstream/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
index f10f052..9cfb99a 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -16,7 +16,7 @@
backlight_display: backlight-display {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -277,7 +277,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts b/dts/upstream/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
index 1762bc4..ed61ae8 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
@@ -18,7 +18,7 @@
lcd_backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm5 0 50000>;
+ pwms = <&pwm5 0 50000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -168,7 +168,6 @@
};
&pwm5 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm5>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-geam.dts b/dts/upstream/src/arm/nxp/imx/imx6ul-geam.dts
index 2ca18f3..cdbb8c4 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-geam.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-geam.dts
@@ -21,7 +21,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm8 0 100000>;
+ pwms = <&pwm8 0 100000 0>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
@@ -194,7 +194,6 @@
};
&pwm8 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm8>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/dts/upstream/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index af337f1..be3cacb 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -9,7 +9,7 @@
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 191000>;
+ pwms = <&pwm3 0 191000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_5v>;
@@ -143,7 +143,6 @@
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-isiot.dtsi b/dts/upstream/src/arm/nxp/imx/imx6ul-isiot.dtsi
index 14fc482..ee86c36 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-isiot.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-isiot.dtsi
@@ -20,7 +20,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm8 0 100000>;
+ pwms = <&pwm8 0 100000 0>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
@@ -187,7 +187,6 @@
};
&pwm8 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm8>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts b/dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts
index 0c64370..4e8191a 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts
@@ -14,7 +14,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm7 0 5000000>;
+ pwms = <&pwm7 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -41,7 +41,6 @@
};
&pwm7 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm7>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi b/dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi
index 33d5f27..d8f7877 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi
@@ -35,7 +35,7 @@
pwm-beeper {
compatible = "pwm-beeper";
- pwms = <&pwm8 0 5000>;
+ pwms = <&pwm8 0 5000 0>;
};
reg_3v3: regulator-3v3 {
@@ -152,7 +152,6 @@
};
&pwm8 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm8>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-pico.dtsi b/dts/upstream/src/arm/nxp/imx/imx6ul-pico.dtsi
index 07dcecb..fe307f4 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-pico.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-pico.dtsi
@@ -22,7 +22,7 @@
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 5000000>;
+ pwms = <&pwm3 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
@@ -177,7 +177,6 @@
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts b/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
new file mode 100644
index 0000000..cfcd878
--- /dev/null
+++ b/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+ model = "Seeed NPi iMX6ULL Dev Board with NAND";
+ compatible = "seeed,imx6ull-seeed-npi-emmc", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&usdhc2 {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts b/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
new file mode 100644
index 0000000..87c9434
--- /dev/null
+++ b/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+ model = "Seeed NPi iMX6ULL Dev Board with NAND";
+ compatible = "seeed,imx6ull-seeed-npi-nand", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&gpmi {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
new file mode 100644
index 0000000..6bb12e0
--- /dev/null
+++ b/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ gpio_buttons: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_button>;
+
+ button-0 {
+ gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ label = "SW2";
+ linux,code = <KEY_A>;
+ wakeup-source;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-blue {
+ gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ label = "LED_B";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ led-green {
+ gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+ label = "LED_G";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ led-red {
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ label = "LED_R";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ led-user {
+ gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+ label = "User";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ };
+
+ reg_5v_sys: regulator-5v-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&reg_5v_sys>;
+ };
+
+ reg_3v3_in: regulator-3v3-in {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3_IN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&reg_5v_sys>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&reg_3v3_in>;
+ };
+
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vmmc>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <&reg_3v3>;
+ };
+};
+
+&csi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_csi1>;
+ status = "disabled"; /* LED Blue & Green shared */
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&lcdif {
+ pinctrl-0 = <&pinctrl_lcdif>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&reg_dcdc_3v3 {
+ vin-supply = <&reg_3v3_in>;
+};
+
+&sai2 {
+ assigned-clock-rates = <320000000>;
+ assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+ pinctrl-0 = <&pinctrl_sai2>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ dr_mode = "otg";
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_usdhc1_cd>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_usdhc1_cd>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <&reg_sd1_vmmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_button: buttongrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0
+ >;
+ };
+
+ pinctrl_csi1: csi1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
+ MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
+ MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
+ MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
+ MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
+ MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
+ MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
+ MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
+ MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
+ MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
+ MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ >;
+ };
+
+ pinctrl_gpio_leds: ledgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x0b0b0
+ MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x0b0b0
+ MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
+ >;
+ };
+
+ pinctrl_lcdif: lcdif-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x79
+ >;
+ };
+
+ pinctrl_reg_vmmc: usdhc1regvmmc {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059
+ >;
+ };
+
+ pinctrl_sai2: sai2-grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pin = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pin = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
+ MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pin = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1
+ MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pin = <
+ MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pin = <
+ MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pin = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc1_cd: usdhc1cd {
+ fsl,pins = <
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
+ >;
+ };
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi b/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi
new file mode 100644
index 0000000..f5ad6b5
--- /dev/null
+++ b/dts/upstream/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Seeed NPi-iMX6ULL Dev Board";
+ compatible = "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+
+ reg_dcdc_3v3: regulator-dcdc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "DCDC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_dram_1v35: regulator-dram-1v35 {
+ compatible = "regulator-fixed";
+ regulator-name = "DRAM_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ vin-supply = <&reg_dcdc_3v3>;
+ };
+
+ reg_vdd_arm_soc_in: regulator-vdd-arm-soc-in {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ARM_SOC_IN";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ vin-supply = <&reg_dcdc_3v3>;
+ };
+
+ reg_dcdc_1v8: regulator-dcdc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "DCDC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&reg_dcdc_3v3>;
+ };
+
+ reg_sd1_vqmmc: regulator-sd1-vqmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "NVCC_SD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vqmmc>;
+ regulator-always-on;
+ vin-supply = <&reg_dcdc_1v8>;
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "disabled";
+};
+
+&usdhc1 {
+ vqmmc-supply = <&reg_sd1_vqmmc>;
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ keep-power-in-suspend;
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x0b0b1
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1
+ MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x0b0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1
+ >;
+ };
+
+ pinctrl_reg_vqmmc: usdhc1regvqmmc {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
+ >;
+ };
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-master.dts b/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-master.dts
index 67007ce..f9bbd58 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-master.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-master.dts
@@ -45,7 +45,7 @@
interrupts = <19 IRQ_TYPE_EDGE_RISING>;
spi-cpha;
spi-cpol;
- spi-max-frequency = <16000000>;
+ spi-max-frequency = <12000000>;
};
};
@@ -63,7 +63,7 @@
interrupts = <9 IRQ_TYPE_EDGE_RISING>;
spi-cpha;
spi-cpol;
- spi-max-frequency = <16000000>;
+ spi-max-frequency = <12000000>;
};
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slave.dts b/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slave.dts
index cee223b..ef06619 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slave.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slave.dts
@@ -23,7 +23,7 @@
interrupts = <19 IRQ_TYPE_EDGE_RISING>;
spi-cpha;
spi-cpol;
- spi-max-frequency = <16000000>;
+ spi-max-frequency = <12000000>;
};
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts b/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts
index 7fd53b7..83db65b 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts
@@ -45,7 +45,7 @@
interrupts = <19 IRQ_TYPE_EDGE_RISING>;
spi-cpha;
spi-cpol;
- spi-max-frequency = <16000000>;
+ spi-max-frequency = <12000000>;
};
};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ull-uti260b.dts b/dts/upstream/src/arm/nxp/imx/imx6ull-uti260b.dts
new file mode 100644
index 0000000..e4576d5
--- /dev/null
+++ b/dts/upstream/src/arm/nxp/imx/imx6ull-uti260b.dts
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2022-2024 Sebastian Reichel <sre@kernel.org>
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "UNI-T UTi260B Thermal Camera";
+ compatible = "uni-t,uti260b", "fsl,imx6ull";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ panel_backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ enable-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_backlight_enable>;
+ power-supply = <&reg_vsd>;
+ pwms = <&pwm1 0 50000 0>;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ /* generic 26650 battery */
+ device-chemistry = "lithium-ion";
+ charge-full-design-microamp-hours = <5000000>;
+ voltage-max-design-microvolt = <4200000>;
+ voltage-min-design-microvolt = <3300000>;
+ };
+
+ tp5000: charger {
+ compatible = "gpio-charger";
+ charger-type = "usb-sdp";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_charger_stat1>;
+ };
+
+ fuel-gauge {
+ compatible = "adc-battery";
+ charged-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ io-channel-names = "voltage";
+ io-channels = <&adc1 7>;
+ monitored-battery = <&battery>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_charger_stat2>;
+ power-supplies = <&tp5000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_gpio_keys>;
+ autorepeat;
+
+ up-key {
+ label = "Up";
+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ down-key {
+ label = "Down";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+
+ left-key {
+ label = "Left";
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LEFT>;
+ };
+
+ right-key {
+ label = "Right";
+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RIGHT>;
+ };
+
+ ok-key {
+ label = "Ok";
+ gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ return-key {
+ label = "Return";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ESC>;
+ };
+
+ play-key {
+ label = "Media";
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MEDIA>;
+ };
+
+ trigger-key {
+ label = "Trigger";
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_TRIGGER>;
+ };
+
+ power-key {
+ label = "Power";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ light-key {
+ label = "Light";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_led_ctrl>;
+
+ led {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_FLASH;
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_poweroff>;
+ };
+
+ reg_vref: regulator-vref-4v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VREF_4V2";
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ };
+
+ reg_vsd: regulator-vsd {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc1 {
+ #io-channel-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_adc>;
+ vref-supply = <&reg_vref>;
+ status = "okay";
+};
+
+&csi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_csi>;
+ status = "okay";
+
+ port {
+ parallel_from_gc0308: endpoint {
+ remote-endpoint = <&gc0308_to_parallel>;
+ };
+ };
+};
+
+&ecspi3 {
+ cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_spi3>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "inanbo,t28cp45tn89-v17";
+ reg = <0>;
+ backlight = <&panel_backlight>;
+ power-supply = <&reg_vsd>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <1000000>;
+ spi-rx-bus-width = <0>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
+
+&gpio1 {
+ ir-reset-hog {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ line-name = "ir-reset-gpio";
+ output-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_ir_reset>;
+ };
+};
+
+&gpio2 {
+ /* configuring this to output-high results in poweroff */
+ power-en-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ line-name = "power-en-gpio";
+ output-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_poweroff2>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_i2c1>;
+ status = "okay";
+
+ camera@21 {
+ compatible = "galaxycore,gc0308";
+ reg = <0x21>;
+ clocks = <&clks IMX6UL_CLK_CSI>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_gc0308>;
+ powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ vdd28-supply = <&reg_vsd>;
+
+ port {
+ gc0308_to_parallel: endpoint {
+ remote-endpoint = <&parallel_from_gc0308>;
+ bus-width = <8>;
+ data-shift = <2>; /* lines 9:2 are used */
+ hsync-active = <1>; /* active high */
+ vsync-active = <1>; /* active high */
+ data-active = <1>; /* active high */
+ pclk-sample = <1>; /* sample on rising edge */
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_i2c2>;
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&lcdif {
+ assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_lcd_data>, <&mux_lcd_ctrl>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_pwm>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_uart>;
+ status = "okay";
+};
+
+&usbotg1 {
+ /* USB-C connector */
+ disable-over-current;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ /* thermal sensor */
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy1 {
+ fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+ fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+ /* MicroSD */
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ no-1-8-v;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&mux_sdhc1>, <&mux_sdhc1_cd>;
+ pinctrl-1 = <&mux_sdhc1_100mhz>, <&mux_sdhc1_cd>;
+ pinctrl-2 = <&mux_sdhc1_200mhz>, <&mux_sdhc1_cd>;
+ wakeup-source;
+ vmmc-supply = <&reg_vsd>;
+ status = "okay";
+};
+
+&usdhc2 {
+ /* eMMC */
+ keep-power-in-suspend;
+ no-1-8-v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_sdhc2>;
+ wakeup-source;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mux_wdog>;
+};
+
+&iomuxc {
+ mux_adc: adcgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0xb0
+ >;
+ };
+
+ mux_backlight_enable: blenablegrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x3008
+ >;
+ };
+
+ mux_charger_stat1: charger1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3008
+ >;
+ };
+
+ mux_charger_stat2: charger2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x3008
+ >;
+ };
+
+ mux_csi: csi1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
+ MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
+ MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
+ MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
+ MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
+ MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
+ MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
+ MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
+ MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
+ MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
+ MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
+ >;
+ };
+
+ mux_gc0308: gc0308grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1e038
+ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b088
+ MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x1b088
+ >;
+ };
+
+ mux_gpio_keys: gpiokeygrp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x3008
+ MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x3008
+ MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x3008
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x3008
+ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x3008
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x3008
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x3008
+ MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x3008
+ MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x3008
+ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x3008
+ >;
+ };
+
+ mux_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ mux_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8a8
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8a8
+ >;
+ };
+
+ mux_ir_reset: irresetgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x3008
+ >;
+ };
+
+ mux_lcd_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ mux_lcd_data: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
+ mux_led_ctrl: ledctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x3008
+ >;
+ };
+
+ mux_poweroff: poweroffgrp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x3008
+ >;
+ };
+
+ mux_poweroff2: poweroff2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x3008
+ >;
+ };
+
+ mux_pwm: pwm1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
+ >;
+ };
+
+ mux_sdhc1: sdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ mux_sdhc1_100mhz: sdhc1-100mhz-grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ mux_sdhc1_200mhz: sdhc1-200mhz-grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
+ mux_sdhc1_cd: sdhc1-cd-grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
+ >;
+ };
+
+ mux_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+ >;
+ };
+
+ mux_spi3: ecspi3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x100b1
+ MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x100b1
+ MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x3008
+ >;
+ };
+
+ mux_uart: uartgrp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ mux_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx7s.dtsi b/dts/upstream/src/arm/nxp/imx/imx7s.dtsi
index 9c81c6b..22dd724 100644
--- a/dts/upstream/src/arm/nxp/imx/imx7s.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx7s.dtsi
@@ -636,6 +636,15 @@
clock-names = "snvs-rtc";
};
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ value = <0x60>;
+ mask = <0x60>;
+ status = "disabled";
+ };
+
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
diff --git a/dts/upstream/src/arm/qcom/msm8226-motorola-falcon.dts b/dts/upstream/src/arm/qcom/msm8226-motorola-falcon.dts
new file mode 100644
index 0000000..029e1b1
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/msm8226-motorola-falcon.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+ model = "Motorola Moto G (2013)";
+ compatible = "motorola,falcon", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1;
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x03200000 0x800000>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+ vsp-supply = <&reg_lcd_pos>;
+ vsn-supply = <&reg_lcd_neg>;
+ vddio-supply = <&vddio_disp_vreg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ vddio_disp_vreg: regulator-vddio-disp {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio_disp";
+ gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pm8226_l8>;
+ startup-delay-us = <300>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ dhob@f500000 {
+ reg = <0x0f500000 0x40000>;
+ no-map;
+ };
+
+ shob@f540000 {
+ reg = <0x0f540000 0x2000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+
+ /* Actually <0x0fa00000 0x500000>, but first 100000 is smem */
+ reserved@fb00000 {
+ reg = <0x0fb00000 0x400000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ regulator@3e {
+ compatible = "ti,tps65132";
+ reg = <0x3e>;
+ pinctrl-0 = <&reg_lcd_default>;
+ pinctrl-names = "default";
+
+ reg_lcd_pos: outp {
+ regulator-name = "outp";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-active-discharge = <1>;
+ regulator-boot-on;
+ enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_lcd_neg: outn {
+ regulator-name = "outn";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-active-discharge = <1>;
+ regulator-boot-on;
+ enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp108";
+ reg = <0x48>;
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&temp_alert_default>;
+ pinctrl-names = "default";
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&pm8226_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ };
+
+ pm8226_lvs1: lvs1 {
+ regulator-always-on;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <2000000>;
+ qcom,fast-charge-current-limit = <1900000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&tlmm {
+ reg_lcd_default: reg-lcd-default-state {
+ pins = "gpio31", "gpio33";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ reg_vddio_disp_default: reg-vddio-disp-default-state {
+ pins = "gpio34";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ temp_alert_default: temp-alert-default-state {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-disable;
+ };
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-apq8064.dtsi b/dts/upstream/src/arm/qcom/qcom-apq8064.dtsi
index 9a5ba97..11e60b7 100644
--- a/dts/upstream/src/arm/qcom/qcom-apq8064.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-apq8064.dtsi
@@ -87,7 +87,7 @@
};
idle-states {
- CPU_SPC: spc {
+ CPU_SPC: cpu-spc {
compatible = "qcom,idle-state-spc",
"arm,idle-state";
entry-latency-us = <400>;
@@ -1334,6 +1334,16 @@
<&gcc PCIE_PHY_RESET>;
reset-names = "axi", "ahb", "por", "pci", "phy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
hdmi: hdmi-tx@4a00000 {
diff --git a/dts/upstream/src/arm/qcom/qcom-apq8084.dtsi b/dts/upstream/src/arm/qcom/qcom-apq8084.dtsi
index 8204e64..ca53dff 100644
--- a/dts/upstream/src/arm/qcom/qcom-apq8084.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-apq8084.dtsi
@@ -79,7 +79,7 @@
};
idle-states {
- CPU_SPC: spc {
+ CPU_SPC: cpu-spc {
compatible = "qcom,idle-state-spc",
"arm,idle-state";
entry-latency-us = <150>;
diff --git a/dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi b/dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi
index 681cb3f..0fb65f2 100644
--- a/dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi
@@ -470,6 +470,16 @@
"phy_ahb";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
qpic_bam: dma-controller@7984000 {
@@ -598,24 +608,33 @@
reg = <0x90000 0x64>;
status = "disabled";
- ethphy0: ethernet-phy@0 {
+ ethernet-phy-package@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,qca8075-package";
reg = <0>;
- };
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
+ qcom,tx-drive-strength-milliwatt = <300>;
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
- ethphy3: ethernet-phy@3 {
- reg = <3>;
- };
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
- ethphy4: ethernet-phy@4 {
- reg = <4>;
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
};
};
diff --git a/dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi b/dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi
index 2eb6758..f128510 100644
--- a/dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi
@@ -1121,6 +1121,16 @@
status = "disabled";
perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1: pcie@1b700000 {
@@ -1172,6 +1182,16 @@
status = "disabled";
perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie2: pcie@1b900000 {
@@ -1223,6 +1243,16 @@
status = "disabled";
perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
qsgmii_csr: syscon@1bb00000 {
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8916-smp.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8916-smp.dtsi
index 36328db..1ba403b 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8916-smp.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-msm8916-smp.dtsi
@@ -26,7 +26,7 @@
};
&CPU_SLEEP_0 {
- compatible = "qcom,idle-state-spc";
+ compatible = "qcom,idle-state-spc", "arm,idle-state";
};
&cpu0_acc {
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8974.dtsi
index 5efc38d..5651bb3 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8974.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974.dtsi
@@ -14,6 +14,8 @@
#size-cells = <1>;
interrupt-parent = <&intc>;
+ chosen { };
+
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
@@ -85,7 +87,7 @@
};
idle-states {
- CPU_SPC: spc {
+ CPU_SPC: cpu-spc {
compatible = "qcom,idle-state-spc",
"arm,idle-state";
entry-latency-us = <150>;
@@ -103,7 +105,7 @@
};
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0>;
};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte-common.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
new file mode 100644
index 0000000..b5443fd
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
@@ -0,0 +1,818 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pma8084.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &blsp1_uart1;
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_3; /* SDC2 SD card slot */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ key-volume-down {
+ label = "volume_down";
+ gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-home {
+ label = "home_key";
+ gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_HOMEPAGE>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "volume_up";
+ gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ i2c-gpio-touchkey {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_touchkey_pins>;
+
+ touchkey@20 {
+ compatible = "cypress,tm2-touchkey";
+ reg = <0x20>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchkey_pin>;
+
+ vcc-supply = <&max77826_ldo15>;
+ vdd-supply = <&pma8084_l19>;
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+ };
+ };
+
+ i2c_led_gpio: i2c-gpio-led {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_led_gpioex_pins>;
+
+ i2c-gpio,delay-us = <2>;
+
+ gpio_expander: gpio@20 {
+ compatible = "nxp,pcal6416";
+ reg = <0x20>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ vcc-supply = <&pma8084_s4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpioex_pin>;
+
+ reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+ };
+
+ led-controller@30 {
+ compatible = "panasonic,an30259a";
+ reg = <0x30>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vreg_panel: panel-regulator {
+ compatible = "regulator-fixed";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_en_pin>;
+
+ regulator-name = "panel-vddr-reg";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&max77826_ldo13>;
+ vio-supply = <&pma8084_lvs2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pin>;
+
+ syna,startup-delay-ms = <100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ pmic@60 {
+ reg = <0x60>;
+ compatible = "maxim,max77826";
+
+ regulators {
+ max77826_ldo1: LDO1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ max77826_ldo2: LDO2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ max77826_ldo3: LDO3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ max77826_ldo4: LDO4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_ldo5: LDO5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_ldo6: LDO6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo7: LDO7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_ldo8: LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo9: LDO9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_ldo10: LDO10 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ max77826_ldo11: LDO11 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ max77826_ldo12: LDO12 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo13: LDO13 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo14: LDO14 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo15: LDO15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_buck: BUCK {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ max77826_buckboost: BUCKBOOST {
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3400000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_i2c6 {
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+
+ maxim,double-soc;
+ maxim,rcomp = /bits/ 8 <0x56>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fuelgauge_pin>;
+ };
+};
+
+&blsp2_uart2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_pins_active>;
+ pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+
+ bluetooth {
+ compatible = "brcm,bcm43540-bt";
+ max-speed = <3000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pins>;
+ device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ status = "okay";
+
+ vdda-supply = <&pma8084_l2>;
+ vdd-supply = <&pma8084_l22>;
+ vddio-supply = <&pma8084_l12>;
+
+ panel: panel@0 {
+ reg = <0>;
+ compatible = "samsung,s6e3fa2";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+ iovdd-supply = <&pma8084_lvs4>;
+ vddr-supply = <&vreg_panel>;
+
+ reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+
+ vddio-supply = <&pma8084_l12>;
+};
+
+&pma8084_gpios {
+ gpio_keys_pin_a: gpio-keys-active-state {
+ pins = "gpio2", "gpio3", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PMA8084_GPIO_S4>;
+ };
+
+ touchkey_pin: touchkey-int-state {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
+
+ touch_pin: touchscreen-int-state {
+ pins = "gpio8";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
+
+ panel_en_pin: panel-en-state {
+ pins = "gpio14";
+ function = "normal";
+ bias-pull-up;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+
+ wlan_sleep_clk_pin: wlan-sleep-clk-state {
+ pins = "gpio16";
+ function = "func2";
+
+ output-high;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ };
+
+ panel_rst_pin: panel-rst-state {
+ pins = "gpio17";
+ function = "normal";
+ bias-disable;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+
+ fuelgauge_pin: fuelgauge-int-state {
+ pins = "gpio21";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
+};
+
+&remoteproc_adsp {
+ status = "okay";
+ cx-supply = <&pma8084_s2>;
+};
+
+&remoteproc_mss {
+ status = "okay";
+ cx-supply = <&pma8084_s2>;
+ mss-supply = <&pma8084_s6>;
+ mx-supply = <&pma8084_s1>;
+ pll-supply = <&pma8084_l12>;
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pma8084-regulators";
+
+ pma8084_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ };
+
+ pma8084_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pma8084_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pma8084_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pma8084_s6: s6 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pma8084_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pma8084_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pma8084_l3: l3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pma8084_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pma8084_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pma8084_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pma8084_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pma8084_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pma8084_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pma8084_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pma8084_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pma8084_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pma8084_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pma8084_l19: l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pma8084_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pma8084_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pma8084_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pma8084_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pma8084_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pma8084_l25: l25 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ pma8084_l26: l26 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pma8084_l27: l27 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pma8084_lvs1: lvs1 {};
+ pma8084_lvs2: lvs2 {};
+ pma8084_lvs3: lvs3 {};
+ pma8084_lvs4: lvs4 {};
+
+ pma8084_5vs1: 5vs1 {};
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pma8084_l20>;
+ vqmmc-supply = <&pma8084_s4>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+ max-frequency = <100000000>;
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pma8084_s4>;
+ non-removable;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+
+ wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+
+ /*
+ * Allow all klte* variants to load the same NVRAM file,
+ * as they have little difference in the WiFi part.
+ */
+ brcm,board-type = "samsung,klte";
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+ };
+};
+
+&sdhc_3 {
+ status = "okay";
+ max-frequency = <100000000>;
+ vmmc-supply = <&pma8084_l21>;
+ vqmmc-supply = <&pma8084_l13>;
+
+ /*
+ * cd-gpio is intentionally disabled. If enabled, an SD card
+ * present during boot is not initialized correctly. Without
+ * cd-gpios the driver resorts to polling, so hotplug works.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
+ /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+ /* This seems suspicious, but somebody with this device should look into it. */
+ blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "blsp_uart8";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ bt_pins: bt-pins-state {
+ hostwake-pins {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <16>;
+ };
+
+ devwake-pins {
+ pins = "gpio91";
+ function = "gpio";
+ drive-strength = <2>;
+ };
+ };
+
+ sdc1_on: sdhc1-on-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+ };
+
+ sdc3_on: sdc3-on-state {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ sdhc3_cd_pin: sdc3-cd-on-state {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_on: sdhc2-on-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ i2c_touchkey_pins: i2c-touchkey-state {
+ pins = "gpio95", "gpio96";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ i2c_led_gpioex_pins: i2c-led-gpioex-state {
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpioex_pin: gpioex-state {
+ pins = "gpio145";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ wifi_pin: wifi-state {
+ pins = "gpio92";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ panel_te_pin: panel-state {
+ pins = "gpio12";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&usb {
+ status = "okay";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+};
+
+&usb_hs1_phy {
+ status = "okay";
+
+ v1p8-supply = <&pma8084_l6>;
+ v3p3-supply = <&pma8084_l24>;
+
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts b/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
index b93539e..954665f 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,817 +1,16 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pma8084.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
/ {
model = "Samsung Galaxy S5";
compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
- chassis-type = "handset";
-
- aliases {
- serial0 = &blsp1_uart1;
- mmc0 = &sdhc_1; /* SDC1 eMMC slot */
- mmc1 = &sdhc_3; /* SDC2 SD card slot */
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- key-volume-down {
- label = "volume_down";
- gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <15>;
- };
-
- key-home {
- label = "home_key";
- gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_HOMEPAGE>;
- wakeup-source;
- debounce-interval = <15>;
- };
-
- key-volume-up {
- label = "volume_up";
- gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <15>;
- };
- };
-
- i2c-gpio-touchkey {
- compatible = "i2c-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_touchkey_pins>;
-
- touchkey@20 {
- compatible = "cypress,tm2-touchkey";
- reg = <0x20>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&touchkey_pin>;
-
- vcc-supply = <&max77826_ldo15>;
- vdd-supply = <&pma8084_l19>;
-
- linux,keycodes = <KEY_APPSELECT KEY_BACK>;
- };
- };
-
- i2c-gpio-led {
- compatible = "i2c-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_led_gpioex_pins>;
-
- i2c-gpio,delay-us = <2>;
-
- gpio_expander: gpio@20 {
- compatible = "nxp,pcal6416";
- reg = <0x20>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- vcc-supply = <&pma8084_s4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpioex_pin>;
-
- reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
- };
-
- led-controller@30 {
- compatible = "panasonic,an30259a";
- reg = <0x30>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@1 {
- reg = <1>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@2 {
- reg = <2>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@3 {
- reg = <3>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_BLUE>;
- };
- };
- };
-
- vreg_wlan: wlan-regulator {
- compatible = "regulator-fixed";
-
- regulator-name = "wl-reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vreg_panel: panel-regulator {
- compatible = "regulator-fixed";
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_en_pin>;
-
- regulator-name = "panel-vddr-reg";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
-
- gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
-};
-
-&blsp1_i2c2 {
- status = "okay";
-
- touchscreen@20 {
- compatible = "syna,rmi4-i2c";
- reg = <0x20>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
- vdd-supply = <&max77826_ldo13>;
- vio-supply = <&pma8084_lvs2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&touch_pin>;
-
- syna,startup-delay-ms = <100>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- };
- };
-};
-
-&blsp1_i2c6 {
- status = "okay";
-
- pmic@60 {
- reg = <0x60>;
- compatible = "maxim,max77826";
-
- regulators {
- max77826_ldo1: LDO1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- max77826_ldo2: LDO2 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- max77826_ldo3: LDO3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- max77826_ldo4: LDO4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo5: LDO5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo6: LDO6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo7: LDO7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo8: LDO8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo9: LDO9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo10: LDO10 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- max77826_ldo11: LDO11 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2950000>;
- };
-
- max77826_ldo12: LDO12 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo13: LDO13 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo14: LDO14 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo15: LDO15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_buck: BUCK {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- max77826_buckboost: BUCKBOOST {
- regulator-min-microvolt = <3400000>;
- regulator-max-microvolt = <3400000>;
- };
- };
- };
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&blsp2_i2c6 {
- status = "okay";
-
- fuelgauge@36 {
- compatible = "maxim,max17048";
- reg = <0x36>;
-
- maxim,double-soc;
- maxim,rcomp = /bits/ 8 <0x56>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&fuelgauge_pin>;
- };
-};
-
-&blsp2_uart2 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_pins_active>;
- pinctrl-1 = <&blsp2_uart2_pins_sleep>;
-
- bluetooth {
- compatible = "brcm,bcm43540-bt";
- max-speed = <3000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_pins>;
- device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&tlmm>;
- interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wakeup";
- };
-};
-
-&gpu {
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_dsi0 {
- status = "okay";
-
- vdda-supply = <&pma8084_l2>;
- vdd-supply = <&pma8084_l22>;
- vddio-supply = <&pma8084_l12>;
-
- panel: panel@0 {
- reg = <0>;
- compatible = "samsung,s6e3fa2";
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
- iovdd-supply = <&pma8084_lvs4>;
- vddr-supply = <&vreg_panel>;
-
- reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&mdss_dsi0_out>;
- };
- };
- };
-};
-
-&mdss_dsi0_out {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
-};
-
-&mdss_dsi0_phy {
- status = "okay";
-
- vddio-supply = <&pma8084_l12>;
};
-&pma8084_gpios {
- gpio_keys_pin_a: gpio-keys-active-state {
- pins = "gpio2", "gpio3", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- touchkey_pin: touchkey-int-state {
- pins = "gpio6";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- touch_pin: touchscreen-int-state {
- pins = "gpio8";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- panel_en_pin: panel-en-state {
- pins = "gpio14";
- function = "normal";
- bias-pull-up;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
-
- wlan_sleep_clk_pin: wlan-sleep-clk-state {
- pins = "gpio16";
- function = "func2";
-
- output-high;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
- };
-
- panel_rst_pin: panel-rst-state {
- pins = "gpio17";
- function = "normal";
- bias-disable;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
-
- fuelgauge_pin: fuelgauge-int-state {
- pins = "gpio21";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
+&i2c_led_gpio {
+ scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
-&remoteproc_adsp {
- status = "okay";
- cx-supply = <&pma8084_s2>;
-};
-
-&remoteproc_mss {
- status = "okay";
- cx-supply = <&pma8084_s2>;
- mss-supply = <&pma8084_s6>;
- mx-supply = <&pma8084_s1>;
- pll-supply = <&pma8084_l12>;
-};
-
-&rpm_requests {
- regulators-0 {
- compatible = "qcom,rpm-pma8084-regulators";
-
- pma8084_s1: s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- regulator-always-on;
- };
-
- pma8084_s2: s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pma8084_s3: s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pma8084_s4: s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_s5: s5 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
-
- pma8084_s6: s6 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pma8084_l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pma8084_l3: l3 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pma8084_l4: l4 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l8: l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l9: l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l10: l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l11: l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pma8084_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- pma8084_l13: l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l14: l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l15: l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pma8084_l16: l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pma8084_l17: l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pma8084_l18: l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pma8084_l19: l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pma8084_l20: l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-system-load = <200000>;
- regulator-allow-set-load;
- };
-
- pma8084_l21: l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-system-load = <200000>;
- regulator-allow-set-load;
- };
-
- pma8084_l22: l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pma8084_l23: l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pma8084_l24: l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- pma8084_l25: l25 {
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2100000>;
- };
-
- pma8084_l26: l26 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pma8084_l27: l27 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_lvs1: lvs1 {};
- pma8084_lvs2: lvs2 {};
- pma8084_lvs3: lvs3 {};
- pma8084_lvs4: lvs4 {};
-
- pma8084_5vs1: 5vs1 {};
- };
-};
-
-&sdhc_1 {
- status = "okay";
-
- vmmc-supply = <&pma8084_l20>;
- vqmmc-supply = <&pma8084_s4>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_on>;
- pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
- status = "okay";
- max-frequency = <100000000>;
- vmmc-supply = <&vreg_wlan>;
- vqmmc-supply = <&pma8084_s4>;
- non-removable;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_on>;
- pinctrl-1 = <&sdc2_off>;
-
- wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
-
- interrupt-parent = <&tlmm>;
- interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
- };
-};
-
-&sdhc_3 {
- status = "okay";
- max-frequency = <100000000>;
- vmmc-supply = <&pma8084_l21>;
- vqmmc-supply = <&pma8084_l13>;
-
- /*
- * cd-gpio is intentionally disabled. If enabled, an SD card
- * present during boot is not initialized correctly. Without
- * cd-gpios the driver resorts to polling, so hotplug works.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
- /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
-};
-
-&tlmm {
- /* This seems suspicious, but somebody with this device should look into it. */
- blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "blsp_uart8";
- drive-strength = <8>;
- bias-disable;
- };
-
- blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- bt_pins: bt-pins-state {
- hostwake-pins {
- pins = "gpio75";
- function = "gpio";
- drive-strength = <16>;
- };
-
- devwake-pins {
- pins = "gpio91";
- function = "gpio";
- drive-strength = <2>;
- };
- };
-
- sdc1_on: sdhc1-on-state {
- clk-pins {
- pins = "sdc1_clk";
- drive-strength = <4>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <4>;
- bias-pull-up;
- };
- };
-
- sdc3_on: sdc3-on-state {
- pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
- function = "sdc3";
- drive-strength = <8>;
- bias-disable;
- };
-
- sdhc3_cd_pin: sdc3-cd-on-state {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdc2_on: sdhc2-on-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
-
- i2c_touchkey_pins: i2c-touchkey-state {
- pins = "gpio95", "gpio96";
- function = "gpio";
- bias-pull-up;
- };
-
- i2c_led_gpioex_pins: i2c-led-gpioex-state {
- pins = "gpio120", "gpio121";
- function = "gpio";
- bias-pull-down;
- };
-
- gpioex_pin: gpioex-state {
- pins = "gpio145";
- function = "gpio";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- wifi_pin: wifi-state {
- pins = "gpio92";
- function = "gpio";
- bias-pull-down;
- };
-
- panel_te_pin: panel-state {
- pins = "gpio12";
- function = "mdp_vsync";
- drive-strength = <2>;
- bias-disable;
- };
-};
-
-&usb {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-};
-
-&usb_hs1_phy {
- status = "okay";
-
- v1p8-supply = <&pma8084_l6>;
- v3p3-supply = <&pma8084_l24>;
-
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
+&i2c_led_gpioex_pins {
+ pins = "gpio120", "gpio121";
};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-kltechn.dts b/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-kltechn.dts
new file mode 100644
index 0000000..b902e31
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-samsung-kltechn.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
+
+/ {
+ model = "Samsung Galaxy S5 China";
+ compatible = "samsung,kltechn", "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+};
+
+&i2c_led_gpio {
+ scl-gpios = <&tlmm 61 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 60 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_led_gpioex_pins {
+ pins = "gpio60", "gpio61";
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index ee94741..409d179 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,60 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pm8841.dtsi"
-#include "pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
/ {
model = "Sony Xperia Z2 Tablet";
compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
chassis-type = "tablet";
- aliases {
- serial0 = &blsp1_uart2;
- serial1 = &blsp2_uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- key-volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
-
- key-camera-snapshot {
- label = "camera_snapshot";
- gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA>;
- };
-
- key-camera-focus {
- label = "camera_focus";
- gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA_FOCUS>;
- };
-
- key-volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- };
- };
-
vreg_bl_vddio: lcd-backlight-vddio {
compatible = "regulator-fixed";
regulator-name = "vreg_bl_vddio";
@@ -67,107 +18,15 @@
vin-supply = <&pm8941_s3>;
startup-delay-us = <70000>;
- pinctrl-names = "default";
pinctrl-0 = <&lcd_backlight_en_pin_a>;
- };
-
- vreg_vsp: lcd-dcdc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vreg_vsp";
- regulator-min-microvolt = <5600000>;
- regulator-max-microvolt = <5600000>;
-
- gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_dcdc_en_pin_a>;
- };
-
- vreg_boost: vreg-boost {
- compatible = "regulator-fixed";
-
- regulator-name = "vreg-boost";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- regulator-always-on;
- regulator-boot-on;
-
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
pinctrl-names = "default";
- pinctrl-0 = <&boost_bypass_n_pin>;
};
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
-
- vreg_wlan: wlan-regulator {
- compatible = "regulator-fixed";
-
- regulator-name = "wl-reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_regulator_pin>;
- };
-};
-
-&blsp1_uart2 {
- status = "okay";
};
-&blsp2_i2c2 {
- status = "okay";
+&blsp2_i2c5 {
clock-frequency = <355000>;
- synaptics@2c {
- compatible = "syna,rmi4-i2c";
- reg = <0x2c>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd-supply = <&pm8941_l22>;
- vio-supply = <&pm8941_lvs3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts_int_pin>;
-
- syna,startup-delay-ms = <100>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f11@11 {
- reg = <0x11>;
- syna,sensor-type = <1>;
- touchscreen-inverted-x;
- };
- };
-};
-
-&blsp2_i2c5 {
status = "okay";
- clock-frequency = <355000>;
lp8566_wled: backlight@2c {
compatible = "ti,lp8556";
@@ -182,42 +41,52 @@
rom-addr = /bits/ 8 <0xa0>;
rom-val = /bits/ 8 <0xff>;
};
+
rom-a1h {
rom-addr = /bits/ 8 <0xa1>;
rom-val = /bits/ 8 <0x3f>;
};
+
rom-a2h {
rom-addr = /bits/ 8 <0xa2>;
rom-val = /bits/ 8 <0x20>;
};
+
rom-a3h {
rom-addr = /bits/ 8 <0xa3>;
rom-val = /bits/ 8 <0x5e>;
};
+
rom-a4h {
rom-addr = /bits/ 8 <0xa4>;
rom-val = /bits/ 8 <0x02>;
};
+
rom-a5h {
rom-addr = /bits/ 8 <0xa5>;
rom-val = /bits/ 8 <0x04>;
};
+
rom-a6h {
rom-addr = /bits/ 8 <0xa6>;
rom-val = /bits/ 8 <0x80>;
};
+
rom-a7h {
rom-addr = /bits/ 8 <0xa7>;
rom-val = /bits/ 8 <0xf7>;
};
+
rom-a9h {
rom-addr = /bits/ 8 <0xa9>;
rom-val = /bits/ 8 <0x80>;
};
+
rom-aah {
rom-addr = /bits/ 8 <0xaa>;
rom-val = /bits/ 8 <0x0f>;
};
+
rom-aeh {
rom-addr = /bits/ 8 <0xae>;
rom-val = /bits/ 8 <0x0f>;
@@ -232,8 +101,8 @@
compatible = "brcm,bcm43438-bt";
max-speed = <3000000>;
- pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+ pinctrl-names = "default";
host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
@@ -241,339 +110,26 @@
};
};
-&pm8941_coincell {
- status = "okay";
-
- qcom,rset-ohms = <2100>;
- qcom,vset-millivolts = <3000>;
-};
-
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active-state {
- pins = "gpio2", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
-
bt_reg_on_pin: bt-reg-on-state {
pins = "gpio16";
function = "normal";
-
output-low;
power-source = <PM8941_GPIO_S3>;
};
-
- wlan_sleep_clk_pin: wl-sleep-clk-state {
- pins = "gpio17";
- function = "func2";
-
- output-high;
- power-source = <PM8941_GPIO_S3>;
- };
-
- wlan_regulator_pin: wl-reg-active-state {
- pins = "gpio18";
- function = "normal";
-
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- };
-
- lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
- pins = "gpio20";
- function = "normal";
-
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- input-disable;
- output-low;
- };
-
-};
-
-&pm8941_lpg {
- status = "okay";
-
- qcom,power-source = <1>;
-
- multi-led {
- color = <LED_COLOR_ID_RGB>;
- function = LED_FUNCTION_STATUS;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@5 {
- reg = <5>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@6 {
- reg = <6>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@7 {
- reg = <7>;
- color = <LED_COLOR_ID_RED>;
- };
- };
-};
-
-&remoteproc_adsp {
- cx-supply = <&pm8841_s2>;
- status = "okay";
-};
-
-&remoteproc_mss {
- cx-supply = <&pm8841_s2>;
- mss-supply = <&pm8841_s3>;
- mx-supply = <&pm8841_s1>;
- pll-supply = <&pm8941_l12>;
- status = "okay";
};
&rpm_requests {
- regulators-0 {
- compatible = "qcom,rpm-pm8841-regulators";
-
- pm8841_s1: s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s2: s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s3: s3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s4: s4 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
regulators-1 {
- compatible = "qcom,rpm-pm8941-regulators";
-
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- pm8941_s1: s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_s2: s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- pm8941_s3: s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-system-load = <154000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_s4: s4 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- pm8941_l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8941_l3: l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8941_l4: l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pm8941_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- pm8941_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- pm8941_l8: l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l9: l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
pm8941_l11: l11 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
- pm8941_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_l13: l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- regulator-boot-on;
- };
-
- pm8941_l14: l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l15: l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pm8941_l16: l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pm8941_l17: l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pm8941_l18: l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
pm8941_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
-
- pm8941_l20: l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-system-load = <500000>;
- regulator-allow-set-load;
- regulator-boot-on;
- };
-
- pm8941_l21: l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-boot-on;
- };
-
- pm8941_l22: l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pm8941_l23: l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- pm8941_l24: l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- regulator-boot-on;
- };
-
- pm8941_lvs3: lvs3 {};
- };
-};
-
-&sdhc_1 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_on>;
- pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_on>;
- pinctrl-1 = <&sdc2_off>;
-};
-
-&sdhc_3 {
- status = "okay";
-
- max-frequency = <100000000>;
- vmmc-supply = <&vreg_wlan>;
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdc3_on>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- bcrmf@1 {
- compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
- reg = <1>;
-
- brcm,drive-strength = <10>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_sleep_clk_pin>;
};
};
@@ -591,75 +147,13 @@
status = "okay";
};
-&tlmm {
- lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
- pins = "gpio69";
- function = "gpio";
- drive-strength = <10>;
- output-low;
- bias-disable;
- };
-
- sdc1_on: sdc1-on-state {
- clk-pins {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdc2_on: sdc2-on-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
-
- cd-pins {
- pins = "gpio62";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdc3_on: sdc3-on-state {
- clk-pins {
- pins = "gpio40";
- function = "sdc3";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio39";
- function = "sdc3";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio35", "gpio36", "gpio37", "gpio38";
- function = "sdc3";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
+&synaptics_touchscreen {
+ vio-supply = <&pm8941_lvs3>;
+};
- ts_int_pin: ts-int-pin-state {
- pins = "gpio86";
+&tlmm {
+ bt_dev_wake_pin: bt-dev-wake-state {
+ pins = "gpio96";
function = "gpio";
drive-strength = <2>;
bias-disable;
@@ -673,33 +167,11 @@
output-low;
};
- bt_dev_wake_pin: bt-dev-wake-state {
- pins = "gpio96";
+ lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
+ pins = "gpio69";
function = "gpio";
- drive-strength = <2>;
+ drive-strength = <10>;
+ output-low;
bias-disable;
};
};
-
-&usb {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-};
-
-&usb_hs1_phy {
- status = "okay";
-
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
new file mode 100644
index 0000000..e129bb1
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2;
+ serial0 = &blsp1_uart2;
+ serial1 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_pin_a>;
+ pinctrl-names = "default";
+
+ key-volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ vreg_vsp: lcd-dcdc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_vsp";
+ regulator-min-microvolt = <5600000>;
+ regulator-max-microvolt = <5600000>;
+
+ gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+ pinctrl-names = "default";
+ };
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wlan_regulator_pin>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_i2c2 {
+ clock-frequency = <355000>;
+
+ status = "okay";
+
+ synaptics_touchscreen: synaptics@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&pm8941_l22>;
+ /* vio-supply is set in dts */
+
+ pinctrl-0 = <&ts_int_pin>;
+ pinctrl-names = "default";
+
+ syna,startup-delay-ms = <100>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ touchscreen-inverted-x;
+ };
+ };
+};
+
+&pm8941_coincell {
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+
+ status = "okay";
+};
+
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active-state {
+ pins = "gpio2", "gpio5";
+ function = "normal";
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_sleep_clk_pin: wl-sleep-clk-state {
+ pins = "gpio17";
+ function = "func2";
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_regulator_pin: wl-reg-active-state {
+ pins = "gpio18";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
+ pins = "gpio20";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ input-disable;
+ output-low;
+ };
+};
+
+&pm8941_lpg {
+ qcom,power-source = <1>;
+
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ reg = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@7 {
+ reg = <7>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+};
+
+&pm8941_vib {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ cx-supply = <&pm8841_s2>;
+ status = "okay";
+};
+
+&remoteproc_mss {
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <154000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s4: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <500000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
+ };
+
+ pm8941_lvs3: lvs3 {};
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&sdhc_3 {
+ max-frequency = <100000000>;
+ vmmc-supply = <&vreg_wlan>;
+ non-removable;
+
+ pinctrl-0 = <&sdc3_on>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ wifi@1 {
+ compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ brcm,drive-strength = <10>;
+
+ pinctrl-0 = <&wlan_sleep_clk_pin>;
+ pinctrl-names = "default";
+ };
+};
+
+&tlmm {
+ sdc1_on: sdc1-on-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_on: sdc2-on-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ cd-pins {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ sdc3_on: sdc3-on-state {
+ clk-pins {
+ pins = "gpio40";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "gpio39";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ ts_int_pin: ts-int-pin-state {
+ pins = "gpio86";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&usb {
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ status = "okay";
+};
+
+&usb_hs1_phy {
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
new file mode 100644
index 0000000..1ed6e1c
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+ model = "Sony Xperia Z3";
+ compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974";
+ chassis-type = "handset";
+
+ gpio-keys {
+ key-camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ debounce-interval = <15>;
+ };
+
+ key-camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ debounce-interval = <15>;
+ };
+ };
+};
+
+&gpio_keys_pin_a {
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
+};
+
+&smbb {
+ usb-charge-current-limit = <1500000>;
+ qcom,fast-charge-safe-current = <3000000>;
+ qcom,fast-charge-current-limit = <2150000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4280000>;
+ qcom,minimum-input-voltage = <4200000>;
+
+ status = "okay";
+};
+
+&synaptics_touchscreen {
+ vio-supply = <&pm8941_s3>;
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-sdx55.dtsi b/dts/upstream/src/arm/qcom/qcom-sdx55.dtsi
index edc9aaf..68fa585 100644
--- a/dts/upstream/src/arm/qcom/qcom-sdx55.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-sdx55.dtsi
@@ -378,6 +378,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie_ep: pcie-ep@1c00000 {
diff --git a/dts/upstream/src/arm/renesas/r7s72100.dtsi b/dts/upstream/src/arm/renesas/r7s72100.dtsi
index e6d8da6..08ea4c5 100644
--- a/dts/upstream/src/arm/renesas/r7s72100.dtsi
+++ b/dts/upstream/src/arm/renesas/r7s72100.dtsi
@@ -125,6 +125,7 @@
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -138,6 +139,7 @@
<GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -151,6 +153,7 @@
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -164,6 +167,7 @@
<GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -177,6 +181,7 @@
<GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -190,6 +195,7 @@
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -203,6 +209,7 @@
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -216,6 +223,7 @@
<GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
diff --git a/dts/upstream/src/arm/renesas/r8a73a4.dtsi b/dts/upstream/src/arm/renesas/r8a73a4.dtsi
index ac654ff..9a2ae28 100644
--- a/dts/upstream/src/arm/renesas/r8a73a4.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a73a4.dtsi
@@ -60,6 +60,32 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a73a4", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&mstp1_clks R8A73A4_CLK_TMU0>;
+ clock-names = "fck";
+ power-domains = <&pd_c5>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a73a4", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&mstp1_clks R8A73A4_CLK_TMU3>;
+ clock-names = "fck";
+ power-domains = <&pd_a3r>;
+ status = "disabled";
+ };
+
dbsc1: memory-controller@e6790000 {
compatible = "renesas,dbsc-r8a73a4";
reg = <0 0xe6790000 0 0x10000>;
@@ -654,6 +680,17 @@
};
/* Gate clocks */
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+ clocks = <&cp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_TMU0 R8A73A4_CLK_TMU3
+ >;
+ clock-output-names =
+ "tmu0", "tmu3";
+ };
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
diff --git a/dts/upstream/src/arm/renesas/r8a7742.dtsi b/dts/upstream/src/arm/renesas/r8a7742.dtsi
index 16d146db..d55c344 100644
--- a/dts/upstream/src/arm/renesas/r8a7742.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7742.dtsi
@@ -404,6 +404,64 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7742",
"renesas,rcar-gen2-thermal";
diff --git a/dts/upstream/src/arm/renesas/r8a7743.dtsi b/dts/upstream/src/arm/renesas/r8a7743.dtsi
index 2245d19..d917c0a 100644
--- a/dts/upstream/src/arm/renesas/r8a7743.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7743.dtsi
@@ -329,6 +329,64 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7743",
"renesas,rcar-gen2-thermal";
diff --git a/dts/upstream/src/arm/renesas/r8a7744.dtsi b/dts/upstream/src/arm/renesas/r8a7744.dtsi
index aa13841..754859c 100644
--- a/dts/upstream/src/arm/renesas/r8a7744.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7744.dtsi
@@ -329,6 +329,64 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7744",
"renesas,rcar-gen2-thermal";
diff --git a/dts/upstream/src/arm/renesas/r8a7745.dtsi b/dts/upstream/src/arm/renesas/r8a7745.dtsi
index 44688b8..1682983 100644
--- a/dts/upstream/src/arm/renesas/r8a7745.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7745.dtsi
@@ -304,6 +304,64 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7745",
"renesas,ipmmu-vmsa";
diff --git a/dts/upstream/src/arm/renesas/r8a77470.dtsi b/dts/upstream/src/arm/renesas/r8a77470.dtsi
index a5cf663..2375438 100644
--- a/dts/upstream/src/arm/renesas/r8a77470.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a77470.dtsi
@@ -241,6 +241,50 @@
resets = <&cpg 407>;
};
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
diff --git a/dts/upstream/src/arm/renesas/r8a7790.dtsi b/dts/upstream/src/arm/renesas/r8a7790.dtsi
index 46fb81f..583b74a 100644
--- a/dts/upstream/src/arm/renesas/r8a7790.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7790.dtsi
@@ -434,6 +434,64 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7790",
"renesas,rcar-gen2-thermal",
diff --git a/dts/upstream/src/arm/renesas/r8a7791.dtsi b/dts/upstream/src/arm/renesas/r8a7791.dtsi
index b9d3414..de08ceb 100644
--- a/dts/upstream/src/arm/renesas/r8a7791.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7791.dtsi
@@ -351,6 +351,64 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7791",
"renesas,rcar-gen2-thermal",
diff --git a/dts/upstream/src/arm/renesas/r8a7792.dtsi b/dts/upstream/src/arm/renesas/r8a7792.dtsi
index ecfab3f..7defeb8 100644
--- a/dts/upstream/src/arm/renesas/r8a7792.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7792.dtsi
@@ -351,6 +351,65 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
icram0: sram@e63a0000 {
compatible = "mmio-sram";
reg = <0 0xe63a0000 0 0x12000>;
diff --git a/dts/upstream/src/arm/renesas/r8a7793.dtsi b/dts/upstream/src/arm/renesas/r8a7793.dtsi
index f51bf68..d32a9d5 100644
--- a/dts/upstream/src/arm/renesas/r8a7793.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7793.dtsi
@@ -326,6 +326,64 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7793",
"renesas,rcar-gen2-thermal",
diff --git a/dts/upstream/src/arm/renesas/r8a7794.dtsi b/dts/upstream/src/arm/renesas/r8a7794.dtsi
index 371dd47..f37f094 100644
--- a/dts/upstream/src/arm/renesas/r8a7794.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7794.dtsi
@@ -292,6 +292,64 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@fff60000 {
+ compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+ reg = <0 0xfff60000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 111>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 111>;
+ status = "disabled";
+ };
+
+ tmu2: timer@fff70000 {
+ compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+ reg = <0 0xfff70000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu3: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+ reg = <0 0xfff80000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
diff --git a/dts/upstream/src/arm/renesas/r9a06g032.dtsi b/dts/upstream/src/arm/renesas/r9a06g032.dtsi
index fa63e1a..45f60ee 100644
--- a/dts/upstream/src/arm/renesas/r9a06g032.dtsi
+++ b/dts/upstream/src/arm/renesas/r9a06g032.dtsi
@@ -319,7 +319,6 @@
gmac2: ethernet@44002000 {
compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
reg = <0x44002000 0x2000>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/upstream/src/arm/rockchip/rk3066a.dtsi b/dts/upstream/src/arm/rockchip/rk3066a.dtsi
index 30139f2..15cbd94 100644
--- a/dts/upstream/src/arm/rockchip/rk3066a.dtsi
+++ b/dts/upstream/src/arm/rockchip/rk3066a.dtsi
@@ -128,6 +128,7 @@
pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
power-domains = <&power RK3066_PD_VIO>;
rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
status = "disabled";
ports {
diff --git a/dts/upstream/src/arm/samsung/exynos3250.dtsi b/dts/upstream/src/arm/samsung/exynos3250.dtsi
index 3f1015e..b6c3826 100644
--- a/dts/upstream/src/arm/samsung/exynos3250.dtsi
+++ b/dts/upstream/src/arm/samsung/exynos3250.dtsi
@@ -826,6 +826,7 @@
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
+ fifo-depth = <256>;
status = "disabled";
};
@@ -842,6 +843,7 @@
samsung,spi-src-clk = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
+ fifo-depth = <64>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm/samsung/exynos4.dtsi b/dts/upstream/src/arm/samsung/exynos4.dtsi
index 7f981b5..ed47d0c 100644
--- a/dts/upstream/src/arm/samsung/exynos4.dtsi
+++ b/dts/upstream/src/arm/samsung/exynos4.dtsi
@@ -621,6 +621,7 @@
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
+ fifo-depth = <256>;
status = "disabled";
};
@@ -636,6 +637,7 @@
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -651,6 +653,7 @@
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
+ fifo-depth = <64>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm/samsung/exynos4210-smdkv310.dts b/dts/upstream/src/arm/samsung/exynos4210-smdkv310.dts
index b566f87..18f4f49 100644
--- a/dts/upstream/src/arm/samsung/exynos4210-smdkv310.dts
+++ b/dts/upstream/src/arm/samsung/exynos4210-smdkv310.dts
@@ -88,7 +88,7 @@
&keypad {
samsung,keypad-num-rows = <2>;
samsung,keypad-num-columns = <8>;
- linux,keypad-no-autorepeat;
+ linux,input-no-autorepeat;
wakeup-source;
pinctrl-names = "default";
pinctrl-0 = <&keypad_rows &keypad_cols>;
diff --git a/dts/upstream/src/arm/samsung/exynos4212-tab3.dtsi b/dts/upstream/src/arm/samsung/exynos4212-tab3.dtsi
index e5254e3..9bc0596 100644
--- a/dts/upstream/src/arm/samsung/exynos4212-tab3.dtsi
+++ b/dts/upstream/src/arm/samsung/exynos4212-tab3.dtsi
@@ -45,6 +45,12 @@
/* Default S-BOOT bootloader loads initramfs here */
linux,initrd-start = <0x42000000>;
linux,initrd-end = <0x42800000>;
+
+ /*
+ * Stock bootloader provides incorrect memory size in ATAG_MEM;
+ * override it here
+ */
+ linux,usable-memory-range = <0x40000000 0x3fc00000>;
};
firmware@204f000 {
diff --git a/dts/upstream/src/arm/samsung/exynos4412-origen.dts b/dts/upstream/src/arm/samsung/exynos4412-origen.dts
index 23b1516..10ab7bc 100644
--- a/dts/upstream/src/arm/samsung/exynos4412-origen.dts
+++ b/dts/upstream/src/arm/samsung/exynos4412-origen.dts
@@ -453,7 +453,7 @@
&keypad {
samsung,keypad-num-rows = <3>;
samsung,keypad-num-columns = <2>;
- linux,keypad-no-autorepeat;
+ linux,input-no-autorepeat;
wakeup-source;
pinctrl-0 = <&keypad_rows &keypad_cols>;
pinctrl-names = "default";
diff --git a/dts/upstream/src/arm/samsung/exynos4412-smdk4412.dts b/dts/upstream/src/arm/samsung/exynos4412-smdk4412.dts
index 715dfcb..c83fb25 100644
--- a/dts/upstream/src/arm/samsung/exynos4412-smdk4412.dts
+++ b/dts/upstream/src/arm/samsung/exynos4412-smdk4412.dts
@@ -69,7 +69,7 @@
&keypad {
samsung,keypad-num-rows = <3>;
samsung,keypad-num-columns = <8>;
- linux,keypad-no-autorepeat;
+ linux,input-no-autorepeat;
wakeup-source;
pinctrl-0 = <&keypad_rows &keypad_cols>;
pinctrl-names = "default";
@@ -105,31 +105,31 @@
linux,code = <6>;
};
- key-A {
+ key-a {
keypad,row = <2>;
keypad,column = <6>;
linux,code = <30>;
};
- key-B {
+ key-b {
keypad,row = <2>;
keypad,column = <7>;
linux,code = <48>;
};
- key-C {
+ key-c {
keypad,row = <0>;
keypad,column = <5>;
linux,code = <46>;
};
- key-D {
+ key-d {
keypad,row = <2>;
keypad,column = <5>;
linux,code = <32>;
};
- key-E {
+ key-e {
keypad,row = <0>;
keypad,column = <7>;
linux,code = <18>;
diff --git a/dts/upstream/src/arm/samsung/exynos5250.dtsi b/dts/upstream/src/arm/samsung/exynos5250.dtsi
index 99c84be..b9e7c49 100644
--- a/dts/upstream/src/arm/samsung/exynos5250.dtsi
+++ b/dts/upstream/src/arm/samsung/exynos5250.dtsi
@@ -511,6 +511,7 @@
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
+ fifo-depth = <256>;
};
spi_1: spi@12d30000 {
@@ -526,6 +527,7 @@
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
+ fifo-depth = <64>;
};
spi_2: spi@12d40000 {
@@ -541,6 +543,7 @@
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
+ fifo-depth = <64>;
};
mmc_0: mmc@12200000 {
diff --git a/dts/upstream/src/arm/samsung/exynos5420.dtsi b/dts/upstream/src/arm/samsung/exynos5420.dtsi
index 25ed903..196c6d0 100644
--- a/dts/upstream/src/arm/samsung/exynos5420.dtsi
+++ b/dts/upstream/src/arm/samsung/exynos5420.dtsi
@@ -658,6 +658,7 @@
pinctrl-0 = <&spi0_bus>;
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
+ fifo-depth = <256>;
status = "disabled";
};
@@ -674,6 +675,7 @@
pinctrl-0 = <&spi1_bus>;
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
+ fifo-depth = <64>;
status = "disabled";
};
@@ -690,6 +692,7 @@
pinctrl-0 = <&spi2_bus>;
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
+ fifo-depth = <64>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm/samsung/exynos5800-peach-pi.dts b/dts/upstream/src/arm/samsung/exynos5800-peach-pi.dts
index 9bbbdce..bb01986 100644
--- a/dts/upstream/src/arm/samsung/exynos5800-peach-pi.dts
+++ b/dts/upstream/src/arm/samsung/exynos5800-peach-pi.dts
@@ -185,7 +185,7 @@
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
ports {
port {
diff --git a/dts/upstream/src/arm/samsung/s5pv210.dtsi b/dts/upstream/src/arm/samsung/s5pv210.dtsi
index ed560c9..34e8a3d 100644
--- a/dts/upstream/src/arm/samsung/s5pv210.dtsi
+++ b/dts/upstream/src/arm/samsung/s5pv210.dtsi
@@ -72,7 +72,7 @@
#size-cells = <1>;
ranges;
- onenand: onenand@b0600000 {
+ onenand: nand-controller@b0600000 {
compatible = "samsung,s5pv210-onenand";
reg = <0xb0600000 0x2000>,
<0xb0000000 0x20000>,
@@ -82,7 +82,7 @@
clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
clock-names = "bus", "onenand";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -161,6 +161,7 @@
pinctrl-0 = <&spi0_bus>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <256>;
status = "disabled";
};
@@ -177,6 +178,7 @@
pinctrl-0 = <&spi1_bus>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm/st/stm32f746.dtsi b/dts/upstream/src/arm/st/stm32f746.dtsi
index 65c72b6..2537b3d 100644
--- a/dts/upstream/src/arm/st/stm32f746.dtsi
+++ b/dts/upstream/src/arm/st/stm32f746.dtsi
@@ -257,23 +257,6 @@
status = "disabled";
};
- can3: can@40003400 {
- compatible = "st,stm32f4-bxcan";
- reg = <0x40003400 0x200>;
- interrupts = <104>, <105>, <106>, <107>;
- interrupt-names = "tx", "rx0", "rx1", "sce";
- resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
- st,gcan = <&gcan3>;
- status = "disabled";
- };
-
- gcan3: gcan@40003600 {
- compatible = "st,stm32f4-gcan", "syscon";
- reg = <0x40003600 0x200>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
- };
-
spi2: spi@40003800 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/upstream/src/arm/st/stm32f769.dtsi b/dts/upstream/src/arm/st/stm32f769.dtsi
index 4e7d903..e8cbb99 100644
--- a/dts/upstream/src/arm/st/stm32f769.dtsi
+++ b/dts/upstream/src/arm/st/stm32f769.dtsi
@@ -7,6 +7,23 @@
/ {
soc {
+ can3: can@40003400 {
+ compatible = "st,stm32f4-bxcan";
+ reg = <0x40003400 0x200>;
+ interrupts = <104>, <105>, <106>, <107>;
+ interrupt-names = "tx", "rx0", "rx1", "sce";
+ resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+ st,gcan = <&gcan3>;
+ status = "disabled";
+ };
+
+ gcan3: gcan@40003600 {
+ compatible = "st,stm32f4-gcan", "syscon";
+ reg = <0x40003600 0x200>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+ };
+
dsi: dsi@40016c00 {
compatible = "st,stm32-dsi";
reg = <0x40016c00 0x800>;
diff --git a/dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi b/dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi
index 27e0c38..32c5d8a 100644
--- a/dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi
@@ -47,6 +47,63 @@
};
};
+ ltdc_pins_a: ltdc-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 9, AF13)>, /* LCD_CLK */
+ <STM32_PINMUX('C', 6, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('G', 4, AF11)>, /* LCD_VSYNC */
+ <STM32_PINMUX('H', 9, AF11)>, /* LCD_DE */
+ <STM32_PINMUX('G', 7, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('B', 12, AF13)>, /* LCD_R3 */
+ <STM32_PINMUX('D', 14, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('E', 7, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('E', 13, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 9, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('F', 3, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('D', 5, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('G', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('C', 7, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('A', 15, AF11)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('F', 2, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('H', 14, AF11)>, /* LCD_B4 */
+ <STM32_PINMUX('E', 0, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 6, AF7)>, /* LCD_B6 */
+ <STM32_PINMUX('F', 1, AF13)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ ltdc_sleep_pins_a: ltdc-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('C', 6, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('G', 4, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('B', 12, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('D', 14, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('E', 7, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 9, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('F', 3, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('G', 0, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('C', 7, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('A', 15, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('F', 2, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('E', 0, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 6, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('F', 1, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
mcp23017_pins_a: mcp23017-0 {
pins {
pinmux = <STM32_PINMUX('G', 12, GPIO)>;
diff --git a/dts/upstream/src/arm/st/stm32mp131.dtsi b/dts/upstream/src/arm/st/stm32mp131.dtsi
index 3900f32..6704cee 100644
--- a/dts/upstream/src/arm/st/stm32mp131.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp131.dtsi
@@ -745,340 +745,6 @@
dma-channels = <16>;
};
- adc_2: adc@48004000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48004000 0x400>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC2>, <&rcc ADC2_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- adc2: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_2>;
- interrupts = <0>;
- dmas = <&dmamux1 10 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@13 {
- reg = <13>;
- label = "vrefint";
- };
- channel@14 {
- reg = <14>;
- label = "vddcore";
- };
- channel@16 {
- reg = <16>;
- label = "vddcpu";
- };
- channel@17 {
- reg = <17>;
- label = "vddq_ddr";
- };
- };
- };
-
- usbotg_hs: usb@49000000 {
- compatible = "st,stm32mp15-hsotg", "snps,dwc2";
- reg = <0x49000000 0x40000>;
- clocks = <&rcc USBO_K>;
- clock-names = "otg";
- resets = <&rcc USBO_R>;
- reset-names = "dwc2";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <512>;
- g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
- dr_mode = "otg";
- otg-rev = <0x200>;
- usb33d-supply = <&scmi_usb33>;
- status = "disabled";
- };
-
- usart1: serial@4c000000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c000000 0x400>;
- interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART1_K>;
- resets = <&rcc USART1_R>;
- wakeup-source;
- dmas = <&dmamux1 41 0x400 0x5>,
- <&dmamux1 42 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- usart2: serial@4c001000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4c001000 0x400>;
- interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART2_K>;
- resets = <&rcc USART2_R>;
- wakeup-source;
- dmas = <&dmamux1 43 0x400 0x5>,
- <&dmamux1 44 0x400 0x1>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s4: audio-controller@4c002000 {
- compatible = "st,stm32h7-i2s";
- reg = <0x4c002000 0x400>;
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi4: spi@4c002000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c002000 0x400>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI4_K>;
- resets = <&rcc SPI4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 83 0x400 0x01>,
- <&dmamux1 84 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi5: spi@4c003000 {
- compatible = "st,stm32h7-spi";
- reg = <0x4c003000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI5_K>;
- resets = <&rcc SPI5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 85 0x400 0x01>,
- <&dmamux1 86 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c3: i2c@4c004000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c004000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C3_K>;
- resets = <&rcc I2C3_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 73 0x400 0x1>,
- <&dmamux1 74 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x4>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c4: i2c@4c005000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c005000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C4_K>;
- resets = <&rcc I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 75 0x400 0x1>,
- <&dmamux1 76 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x8>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c5: i2c@4c006000 {
- compatible = "st,stm32mp13-i2c";
- reg = <0x4c006000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C5_K>;
- resets = <&rcc I2C5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&dmamux1 115 0x400 0x1>,
- <&dmamux1 116 0x400 0x1>;
- dma-names = "rx", "tx";
- st,syscfg-fmp = <&syscfg 0x4 0x10>;
- i2c-analog-filter;
- status = "disabled";
- };
-
- timers12: timer@4c007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c007000 0x400>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM12_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@11 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
- status = "disabled";
- };
- };
-
- timers13: timer@4c008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c008000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM13_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@12 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
- status = "disabled";
- };
- };
-
- timers14: timer@4c009000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c009000 0x400>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM14_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@13 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
- status = "disabled";
- };
- };
-
- timers15: timer@4c00a000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00a000 0x400>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM15_K>;
- clock-names = "int";
- dmas = <&dmamux1 105 0x400 0x1>,
- <&dmamux1 106 0x400 0x1>,
- <&dmamux1 107 0x400 0x1>,
- <&dmamux1 108 0x400 0x1>;
- dma-names = "ch1", "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@14 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
- status = "disabled";
- };
- };
-
- timers16: timer@4c00b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00b000 0x400>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM16_K>;
- clock-names = "int";
- dmas = <&dmamux1 109 0x400 0x1>,
- <&dmamux1 110 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@15 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
- status = "disabled";
- };
- };
-
- timers17: timer@4c00c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x4c00c000 0x400>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM17_K>;
- clock-names = "int";
- dmas = <&dmamux1 111 0x400 0x1>,
- <&dmamux1 112 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@16 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
- status = "disabled";
- };
- };
-
rcc: rcc@50000000 {
compatible = "st,stm32mp13-rcc", "syscon";
reg = <0x50000000 0x1000>;
@@ -1092,80 +758,113 @@
<&scmi_clk CK_SCMI_LSI>;
};
- exti: interrupt-controller@5000d000 {
- compatible = "st,stm32mp13-exti", "syscon";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000d000 0x400>;
- };
-
- syscfg: syscon@50020000 {
- compatible = "st,stm32mp157-syscfg", "syscon";
- reg = <0x50020000 0x400>;
- clocks = <&rcc SYSCFG>;
- };
-
- lptimer2: timer@50021000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50021000 0x400>;
- interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM2_K>;
- clock-names = "mux";
- wakeup-source;
+ pwr_regulators: pwr@50001000 {
+ compatible = "st,stm32mp1,pwr-reg";
+ reg = <0x50001000 0x10>;
status = "disabled";
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@1 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
- status = "disabled";
+ reg11: reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
};
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
+ reg18: reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
+ usb33: usb33 {
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
};
- lptimer3: timer@50022000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50022000 0x400>;
- interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM3_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@2 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
- status = "disabled";
- };
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ interrupts-extended =
+ <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */
+ <&intc GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */
+ <&intc GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0>, /* EXTI_20 */
+ <&intc GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */
+ <&intc GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>, /* EXTI_40 */
+ <0>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */
+ <0>,
+ <&intc GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>, /* EXTI_60 */
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* EXTI_70 */
+ };
- timer {
- compatible = "st,stm32-lptimer-timer";
- status = "disabled";
- };
+ syscfg: syscon@50020000 {
+ compatible = "st,stm32mp157-syscfg", "syscon";
+ reg = <0x50020000 0x400>;
+ clocks = <&rcc SYSCFG>;
};
lptimer4: timer@50023000 {
@@ -1210,25 +909,6 @@
};
};
- hash: hash@54003000 {
- compatible = "st,stm32mp13-hash";
- reg = <0x54003000 0x400>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
- dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
- dma-names = "in";
- status = "disabled";
- };
-
- rng: rng@54004000 {
- compatible = "st,stm32mp13-rng";
- reg = <0x54004000 0x400>;
- clocks = <&rcc RNG1_K>;
- resets = <&rcc RNG1_R>;
- status = "disabled";
- };
-
mdma: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
@@ -1239,82 +919,6 @@
dma-requests = <48>;
};
- fmc: memory-controller@58002000 {
- compatible = "st,stm32mp1-fmc2-ebi";
- reg = <0x58002000 0x1000>;
- ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
- <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
- <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
- <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
- <4 0 0x80000000 0x10000000>; /* NAND */
- #address-cells = <2>;
- #size-cells = <1>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
-
- nand-controller@4,0 {
- compatible = "st,stm32mp1-fmc2-nfc";
- reg = <4 0x00000000 0x1000>,
- <4 0x08010000 0x1000>,
- <4 0x08020000 0x1000>,
- <4 0x01000000 0x1000>,
- <4 0x09010000 0x1000>,
- <4 0x09020000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
- <&mdma 24 0x2 0x12000a08 0x0 0x0>,
- <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
- status = "disabled";
- };
- };
-
- qspi: spi@58003000 {
- compatible = "st,stm32f469-qspi";
- reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
- <&mdma 26 0x2 0x10100008 0x0 0x0>;
- dma-names = "tx", "rx";
- clocks = <&rcc QSPI_K>;
- resets = <&rcc QSPI_R>;
- status = "disabled";
- };
-
- sdmmc1: mmc@58005000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC1_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC1_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
- sdmmc2: mmc@58007000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x20253180>;
- reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC2_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC2_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <130000000>;
- status = "disabled";
- };
-
crc1: crc@58009000 {
compatible = "st,stm32f7-crc";
reg = <0x58009000 0x400>;
@@ -1349,29 +953,6 @@
status = "disabled";
};
- usbphyc: usbphyc@5a006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <0>;
- compatible = "st,stm32mp1-usbphyc";
- reg = <0x5a006000 0x1000>;
- clocks = <&rcc USBPHY_K>;
- resets = <&rcc USBPHY_R>;
- vdda1v1-supply = <&scmi_reg11>;
- vdda1v8-supply = <&scmi_reg18>;
- status = "disabled";
-
- usbphyc_port0: usb-phy@0 {
- #phy-cells = <0>;
- reg = <0>;
- };
-
- usbphyc_port1: usb-phy@1 {
- #phy-cells = <1>;
- reg = <1>;
- };
- };
-
rtc: rtc@5c004000 {
compatible = "st,stm32mp1-rtc";
reg = <0x5c004000 0x400>;
@@ -1400,6 +981,555 @@
};
};
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32-etzpc", "simple-bus";
+ reg = <0x5c007000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #access-controller-cells = <1>;
+ ranges;
+
+ adc_2: adc@48004000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&etzpc 33>;
+ status = "disabled";
+
+ adc2: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_2>;
+ interrupts = <0>;
+ dmas = <&dmamux1 10 0x400 0x80000001>;
+ dma-names = "rx";
+ status = "disabled";
+
+ channel@13 {
+ reg = <13>;
+ label = "vrefint";
+ };
+ channel@14 {
+ reg = <14>;
+ label = "vddcore";
+ };
+ channel@16 {
+ reg = <16>;
+ label = "vddcpu";
+ };
+ channel@17 {
+ reg = <17>;
+ label = "vddq_ddr";
+ };
+ };
+ };
+
+ usbotg_hs: usb@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x40000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ otg-rev = <0x200>;
+ usb33d-supply = <&scmi_usb33>;
+ access-controllers = <&etzpc 34>;
+ status = "disabled";
+ };
+
+ usart1: serial@4c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ resets = <&rcc USART1_R>;
+ wakeup-source;
+ dmas = <&dmamux1 41 0x400 0x5>,
+ <&dmamux1 42 0x400 0x1>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 16>;
+ status = "disabled";
+ };
+
+ usart2: serial@4c001000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4c001000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ resets = <&rcc USART2_R>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x5>,
+ <&dmamux1 44 0x400 0x1>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 17>;
+ status = "disabled";
+ };
+
+ i2s4: audio-controller@4c002000 {
+ compatible = "st,stm32h7-i2s";
+ reg = <0x4c002000 0x400>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 13>;
+ status = "disabled";
+ };
+
+ spi4: spi@4c002000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c002000 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI4_K>;
+ resets = <&rcc SPI4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 83 0x400 0x01>,
+ <&dmamux1 84 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 18>;
+ status = "disabled";
+ };
+
+ spi5: spi@4c003000 {
+ compatible = "st,stm32h7-spi";
+ reg = <0x4c003000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI5_K>;
+ resets = <&rcc SPI5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 85 0x400 0x01>,
+ <&dmamux1 86 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 19>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@4c004000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c004000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 73 0x400 0x1>,
+ <&dmamux1 74 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 20>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4c005000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c005000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 75 0x400 0x1>,
+ <&dmamux1 76 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 21>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@4c006000 {
+ compatible = "st,stm32mp13-i2c";
+ reg = <0x4c006000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmamux1 115 0x400 0x1>,
+ <&dmamux1 116 0x400 0x1>;
+ dma-names = "rx", "tx";
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 22>;
+ status = "disabled";
+ };
+
+ timers12: timer@4c007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c007000 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ access-controllers = <&etzpc 23>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@4c008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c008000 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ access-controllers = <&etzpc 24>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@4c009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c009000 0x400>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ access-controllers = <&etzpc 25>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ timers15: timer@4c00a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00a000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
+ access-controllers = <&etzpc 26>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@4c00b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00b000 0x400>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
+ access-controllers = <&etzpc 27>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@4c00c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x4c00c000 0x400>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
+ access-controllers = <&etzpc 28>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controllers = <&etzpc 1>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controllers = <&etzpc 2>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-lptimer-timer";
+ status = "disabled";
+ };
+ };
+
+ hash: hash@54003000 {
+ compatible = "st,stm32mp13-hash";
+ reg = <0x54003000 0x400>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
+ dma-names = "in";
+ access-controllers = <&etzpc 41>;
+ status = "disabled";
+ };
+
+ rng: rng@54004000 {
+ compatible = "st,stm32mp13-rng";
+ reg = <0x54004000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ access-controllers = <&etzpc 40>;
+ status = "disabled";
+ };
+
+ fmc: memory-controller@58002000 {
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ access-controllers = <&etzpc 54>;
+ status = "disabled";
+
+ nand-controller@4,0 {
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+ <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+ <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+ <&mdma 26 0x2 0x10100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ access-controllers = <&etzpc 55>;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@58005000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ access-controllers = <&etzpc 50>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
+ access-controllers = <&etzpc 51>;
+ status = "disabled";
+ };
+
+ usbphyc: usbphyc@5a006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc USBPHY_K>;
+ resets = <&rcc USBPHY_R>;
+ vdda1v1-supply = <&scmi_reg11>;
+ vdda1v8-supply = <&scmi_reg18>;
+ access-controllers = <&etzpc 5>;
+ status = "disabled";
+
+ usbphyc_port0: usb-phy@0 {
+ #phy-cells = <0>;
+ reg = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ #phy-cells = <1>;
+ reg = <1>;
+ };
+ };
+ };
+
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
diff --git a/dts/upstream/src/arm/st/stm32mp133.dtsi b/dts/upstream/src/arm/st/stm32mp133.dtsi
index df451c3..3e394c8 100644
--- a/dts/upstream/src/arm/st/stm32mp133.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp133.dtsi
@@ -33,35 +33,38 @@
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
};
+ };
+};
- adc_1: adc@48003000 {
- compatible = "st,stm32mp13-adc-core";
- reg = <0x48003000 0x400>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC1>, <&rcc ADC1_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- #interrupt-cells = <1>;
+&etzpc {
+ adc_1: adc@48003000 {
+ compatible = "st,stm32mp13-adc-core";
+ reg = <0x48003000 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&etzpc 32>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32mp13-adc";
+ #io-channel-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc_1>;
+ interrupts = <0>;
+ dmas = <&dmamux1 9 0x400 0x80000001>;
+ dma-names = "rx";
status = "disabled";
- adc1: adc@0 {
- compatible = "st,stm32mp13-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc_1>;
- interrupts = <0>;
- dmas = <&dmamux1 9 0x400 0x80000001>;
- dma-names = "rx";
- status = "disabled";
-
- channel@18 {
- reg = <18>;
- label = "vrefint";
- };
+ channel@18 {
+ reg = <18>;
+ label = "vrefint";
};
};
};
diff --git a/dts/upstream/src/arm/st/stm32mp135.dtsi b/dts/upstream/src/arm/st/stm32mp135.dtsi
index 68d32f9..834a4d5 100644
--- a/dts/upstream/src/arm/st/stm32mp135.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp135.dtsi
@@ -19,5 +19,16 @@
port {
};
};
+
+ ltdc: display-controller@5a001000 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x5a001000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LTDC_PX>;
+ clock-names = "lcd";
+ resets = <&scmi_reset RST_SCMI_LTDC>;
+ status = "disabled";
+ };
};
};
diff --git a/dts/upstream/src/arm/st/stm32mp135f-dk.dts b/dts/upstream/src/arm/st/stm32mp135f-dk.dts
index 5217121..567e53a 100644
--- a/dts/upstream/src/arm/st/stm32mp135f-dk.dts
+++ b/dts/upstream/src/arm/st/stm32mp135f-dk.dts
@@ -66,6 +66,46 @@
default-state = "off";
};
};
+
+ panel_backlight: panel-backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
+ default-on;
+ status = "okay";
+ };
+
+ panel_rgb: panel-rgb {
+ compatible = "rocktech,rk043fn48h";
+ enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+ backlight = <&panel_backlight>;
+ power-supply = <&scmi_v3v3_sw>;
+ status = "okay";
+
+ width-mm = <105>;
+ height-mm = <67>;
+
+ panel-timing {
+ clock-frequency = <10000000>;
+ hactive = <480>;
+ hback-porch = <43>;
+ hfront-porch = <10>;
+ hsync-len = <1>;
+ hsync-active = <0>;
+ vactive = <272>;
+ vback-porch = <26>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <&ltdc_out_rgb>;
+ };
+ };
+ };
};
&adc_1 {
@@ -168,6 +208,19 @@
status = "okay";
};
+&ltdc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ltdc_pins_a>;
+ pinctrl-1 = <&ltdc_sleep_pins_a>;
+ status = "okay";
+
+ port {
+ ltdc_out_rgb: endpoint {
+ remote-endpoint = <&panel_in_rgb>;
+ };
+ };
+};
+
&rtc {
status = "okay";
};
diff --git a/dts/upstream/src/arm/st/stm32mp13xc.dtsi b/dts/upstream/src/arm/st/stm32mp13xc.dtsi
index 4d00e75..a8bd5fe 100644
--- a/dts/upstream/src/arm/st/stm32mp13xc.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp13xc.dtsi
@@ -4,15 +4,14 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ access-controllers = <&etzpc 42>;
+ status = "disabled";
};
};
diff --git a/dts/upstream/src/arm/st/stm32mp13xf.dtsi b/dts/upstream/src/arm/st/stm32mp13xf.dtsi
index 4d00e75..a8bd5fe 100644
--- a/dts/upstream/src/arm/st/stm32mp13xf.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp13xf.dtsi
@@ -4,15 +4,14 @@
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp: crypto@54002000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ access-controllers = <&etzpc 42>;
+ status = "disabled";
};
};
diff --git a/dts/upstream/src/arm/st/stm32mp151.dtsi b/dts/upstream/src/arm/st/stm32mp151.dtsi
index fa4cbd3..90c5c72 100644
--- a/dts/upstream/src/arm/st/stm32mp151.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp151.dtsi
@@ -122,1042 +122,6 @@
interrupt-parent = <&intc>;
ranges;
- timers2: timer@40000000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40000000 0x400>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM2_K>;
- clock-names = "int";
- dmas = <&dmamux1 18 0x400 0x1>,
- <&dmamux1 19 0x400 0x1>,
- <&dmamux1 20 0x400 0x1>,
- <&dmamux1 21 0x400 0x1>,
- <&dmamux1 22 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@1 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <1>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
- };
-
- timers3: timer@40001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40001000 0x400>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM3_K>;
- clock-names = "int";
- dmas = <&dmamux1 23 0x400 0x1>,
- <&dmamux1 24 0x400 0x1>,
- <&dmamux1 25 0x400 0x1>,
- <&dmamux1 26 0x400 0x1>,
- <&dmamux1 27 0x400 0x1>,
- <&dmamux1 28 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@2 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <2>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
- };
-
- timers4: timer@40002000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40002000 0x400>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM4_K>;
- clock-names = "int";
- dmas = <&dmamux1 29 0x400 0x1>,
- <&dmamux1 30 0x400 0x1>,
- <&dmamux1 31 0x400 0x1>,
- <&dmamux1 32 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@3 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <3>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
- };
-
- timers5: timer@40003000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40003000 0x400>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM5_K>;
- clock-names = "int";
- dmas = <&dmamux1 55 0x400 0x1>,
- <&dmamux1 56 0x400 0x1>,
- <&dmamux1 57 0x400 0x1>,
- <&dmamux1 58 0x400 0x1>,
- <&dmamux1 59 0x400 0x1>,
- <&dmamux1 60 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@4 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <4>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
- };
-
- timers6: timer@40004000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40004000 0x400>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM6_K>;
- clock-names = "int";
- dmas = <&dmamux1 69 0x400 0x1>;
- dma-names = "up";
- status = "disabled";
-
- timer@5 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <5>;
- status = "disabled";
- };
- };
-
- timers7: timer@40005000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40005000 0x400>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM7_K>;
- clock-names = "int";
- dmas = <&dmamux1 70 0x400 0x1>;
- dma-names = "up";
- status = "disabled";
-
- timer@6 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <6>;
- status = "disabled";
- };
- };
-
- timers12: timer@40006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40006000 0x400>;
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM12_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@11 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <11>;
- status = "disabled";
- };
- };
-
- timers13: timer@40007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40007000 0x400>;
- interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM13_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@12 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <12>;
- status = "disabled";
- };
- };
-
- timers14: timer@40008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x40008000 0x400>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM14_K>;
- clock-names = "int";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@13 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <13>;
- status = "disabled";
- };
- };
-
- lptimer1: timer@40009000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x40009000 0x400>;
- interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM1_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@0 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <0>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
- };
- };
-
- spi2: spi@4000b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x4000b000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI2_K>;
- resets = <&rcc SPI2_R>;
- dmas = <&dmamux1 39 0x400 0x05>,
- <&dmamux1 40 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s2: audio-controller@4000b000 {
- compatible = "st,stm32h7-i2s";
- #sound-dai-cells = <0>;
- reg = <0x4000b000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 39 0x400 0x01>,
- <&dmamux1 40 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi3: spi@4000c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x4000c000 0x400>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI3_K>;
- resets = <&rcc SPI3_R>;
- dmas = <&dmamux1 61 0x400 0x05>,
- <&dmamux1 62 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s3: audio-controller@4000c000 {
- compatible = "st,stm32h7-i2s";
- #sound-dai-cells = <0>;
- reg = <0x4000c000 0x400>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 61 0x400 0x01>,
- <&dmamux1 62 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spdifrx: audio-controller@4000d000 {
- compatible = "st,stm32h7-spdifrx";
- #sound-dai-cells = <0>;
- reg = <0x4000d000 0x400>;
- clocks = <&rcc SPDIF_K>;
- clock-names = "kclk";
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 93 0x400 0x01>,
- <&dmamux1 94 0x400 0x01>;
- dma-names = "rx", "rx-ctrl";
- status = "disabled";
- };
-
- usart2: serial@4000e000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4000e000 0x400>;
- interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART2_K>;
- wakeup-source;
- dmas = <&dmamux1 43 0x400 0x15>,
- <&dmamux1 44 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- usart3: serial@4000f000 {
- compatible = "st,stm32h7-uart";
- reg = <0x4000f000 0x400>;
- interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART3_K>;
- wakeup-source;
- dmas = <&dmamux1 45 0x400 0x15>,
- <&dmamux1 46 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart4: serial@40010000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40010000 0x400>;
- interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc UART4_K>;
- wakeup-source;
- dmas = <&dmamux1 63 0x400 0x15>,
- <&dmamux1 64 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart5: serial@40011000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40011000 0x400>;
- interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc UART5_K>;
- wakeup-source;
- dmas = <&dmamux1 65 0x400 0x15>,
- <&dmamux1 66 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c1: i2c@40012000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x40012000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C1_K>;
- resets = <&rcc I2C1_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x1>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c2: i2c@40013000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x40013000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C2_K>;
- resets = <&rcc I2C2_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x2>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c3: i2c@40014000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x40014000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C3_K>;
- resets = <&rcc I2C3_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x4>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
-
- i2c5: i2c@40015000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x40015000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C5_K>;
- resets = <&rcc I2C5_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x10>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
-
- cec: cec@40016000 {
- compatible = "st,stm32-cec";
- reg = <0x40016000 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CEC_K>, <&rcc CEC>;
- clock-names = "cec", "hdmi-cec";
- status = "disabled";
- };
-
- dac: dac@40017000 {
- compatible = "st,stm32h7-dac-core";
- reg = <0x40017000 0x400>;
- clocks = <&rcc DAC12>;
- clock-names = "pclk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- dac1: dac@1 {
- compatible = "st,stm32-dac";
- #io-channel-cells = <1>;
- reg = <1>;
- status = "disabled";
- };
-
- dac2: dac@2 {
- compatible = "st,stm32-dac";
- #io-channel-cells = <1>;
- reg = <2>;
- status = "disabled";
- };
- };
-
- uart7: serial@40018000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40018000 0x400>;
- interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc UART7_K>;
- wakeup-source;
- dmas = <&dmamux1 79 0x400 0x15>,
- <&dmamux1 80 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart8: serial@40019000 {
- compatible = "st,stm32h7-uart";
- reg = <0x40019000 0x400>;
- interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc UART8_K>;
- wakeup-source;
- dmas = <&dmamux1 81 0x400 0x15>,
- <&dmamux1 82 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- timers1: timer@44000000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44000000 0x400>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "brk", "up", "trg-com", "cc";
- clocks = <&rcc TIM1_K>;
- clock-names = "int";
- dmas = <&dmamux1 11 0x400 0x1>,
- <&dmamux1 12 0x400 0x1>,
- <&dmamux1 13 0x400 0x1>,
- <&dmamux1 14 0x400 0x1>,
- <&dmamux1 15 0x400 0x1>,
- <&dmamux1 16 0x400 0x1>,
- <&dmamux1 17 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4",
- "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@0 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <0>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
- };
-
- timers8: timer@44001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44001000 0x400>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "brk", "up", "trg-com", "cc";
- clocks = <&rcc TIM8_K>;
- clock-names = "int";
- dmas = <&dmamux1 47 0x400 0x1>,
- <&dmamux1 48 0x400 0x1>,
- <&dmamux1 49 0x400 0x1>,
- <&dmamux1 50 0x400 0x1>,
- <&dmamux1 51 0x400 0x1>,
- <&dmamux1 52 0x400 0x1>,
- <&dmamux1 53 0x400 0x1>;
- dma-names = "ch1", "ch2", "ch3", "ch4",
- "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@7 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <7>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-timer-counter";
- status = "disabled";
- };
- };
-
- usart6: serial@44003000 {
- compatible = "st,stm32h7-uart";
- reg = <0x44003000 0x400>;
- interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART6_K>;
- wakeup-source;
- dmas = <&dmamux1 71 0x400 0x15>,
- <&dmamux1 72 0x400 0x11>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi1: spi@44004000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x44004000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI1_K>;
- resets = <&rcc SPI1_R>;
- dmas = <&dmamux1 37 0x400 0x05>,
- <&dmamux1 38 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s1: audio-controller@44004000 {
- compatible = "st,stm32h7-i2s";
- #sound-dai-cells = <0>;
- reg = <0x44004000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 37 0x400 0x01>,
- <&dmamux1 38 0x400 0x01>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- spi4: spi@44005000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x44005000 0x400>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI4_K>;
- resets = <&rcc SPI4_R>;
- dmas = <&dmamux1 83 0x400 0x05>,
- <&dmamux1 84 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- timers15: timer@44006000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44006000 0x400>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM15_K>;
- clock-names = "int";
- dmas = <&dmamux1 105 0x400 0x1>,
- <&dmamux1 106 0x400 0x1>,
- <&dmamux1 107 0x400 0x1>,
- <&dmamux1 108 0x400 0x1>;
- dma-names = "ch1", "up", "trig", "com";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@14 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <14>;
- status = "disabled";
- };
- };
-
- timers16: timer@44007000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44007000 0x400>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM16_K>;
- clock-names = "int";
- dmas = <&dmamux1 109 0x400 0x1>,
- <&dmamux1 110 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
- timer@15 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <15>;
- status = "disabled";
- };
- };
-
- timers17: timer@44008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-timers";
- reg = <0x44008000 0x400>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global";
- clocks = <&rcc TIM17_K>;
- clock-names = "int";
- dmas = <&dmamux1 111 0x400 0x1>,
- <&dmamux1 112 0x400 0x1>;
- dma-names = "ch1", "up";
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- timer@16 {
- compatible = "st,stm32h7-timer-trigger";
- reg = <16>;
- status = "disabled";
- };
- };
-
- spi5: spi@44009000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x44009000 0x400>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI5_K>;
- resets = <&rcc SPI5_R>;
- dmas = <&dmamux1 85 0x400 0x05>,
- <&dmamux1 86 0x400 0x05>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- sai1: sai@4400a000 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4400a000 0x400>;
- reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc SAI1_R>;
- status = "disabled";
-
- sai1a: audio-controller@4400a004 {
- #sound-dai-cells = <0>;
-
- compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x20>;
- clocks = <&rcc SAI1_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 87 0x400 0x01>;
- status = "disabled";
- };
-
- sai1b: audio-controller@4400a024 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x20>;
- clocks = <&rcc SAI1_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 88 0x400 0x01>;
- status = "disabled";
- };
- };
-
- sai2: sai@4400b000 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4400b000 0x400>;
- reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc SAI2_R>;
- status = "disabled";
-
- sai2a: audio-controller@4400b004 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x20>;
- clocks = <&rcc SAI2_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 89 0x400 0x01>;
- status = "disabled";
- };
-
- sai2b: audio-controller@4400b024 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x20>;
- clocks = <&rcc SAI2_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 90 0x400 0x01>;
- status = "disabled";
- };
- };
-
- sai3: sai@4400c000 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x4400c000 0x400>;
- reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc SAI3_R>;
- status = "disabled";
-
- sai3a: audio-controller@4400c004 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-a";
- reg = <0x04 0x20>;
- clocks = <&rcc SAI3_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 113 0x400 0x01>;
- status = "disabled";
- };
-
- sai3b: audio-controller@4400c024 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x20>;
- clocks = <&rcc SAI3_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 114 0x400 0x01>;
- status = "disabled";
- };
- };
-
- dfsdm: dfsdm@4400d000 {
- compatible = "st,stm32mp1-dfsdm";
- reg = <0x4400d000 0x800>;
- clocks = <&rcc DFSDM_K>;
- clock-names = "dfsdm";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- dfsdm0: filter@0 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <0>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 101 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
- };
-
- dfsdm1: filter@1 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <1>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 102 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
- };
-
- dfsdm2: filter@2 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <2>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 103 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
- };
-
- dfsdm3: filter@3 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <3>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 104 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
- };
-
- dfsdm4: filter@4 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <4>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 91 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
- };
-
- dfsdm5: filter@5 {
- compatible = "st,stm32-dfsdm-adc";
- #io-channel-cells = <1>;
- reg = <5>;
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmamux1 92 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
- };
- };
-
- dma1: dma-controller@48000000 {
- compatible = "st,stm32-dma";
- reg = <0x48000000 0x400>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc DMA1>;
- resets = <&rcc DMA1_R>;
- #dma-cells = <4>;
- st,mem2mem;
- dma-requests = <8>;
- };
-
- dma2: dma-controller@48001000 {
- compatible = "st,stm32-dma";
- reg = <0x48001000 0x400>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc DMA2>;
- resets = <&rcc DMA2_R>;
- #dma-cells = <4>;
- st,mem2mem;
- dma-requests = <8>;
- };
-
- dmamux1: dma-router@48002000 {
- compatible = "st,stm32h7-dmamux";
- reg = <0x48002000 0x40>;
- #dma-cells = <3>;
- dma-requests = <128>;
- dma-masters = <&dma1 &dma2>;
- dma-channels = <16>;
- clocks = <&rcc DMAMUX>;
- resets = <&rcc DMAMUX_R>;
- };
-
- adc: adc@48003000 {
- compatible = "st,stm32mp1-adc-core";
- reg = <0x48003000 0x400>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc ADC12>, <&rcc ADC12_K>;
- clock-names = "bus", "adc";
- interrupt-controller;
- st,syscfg = <&syscfg>;
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- adc1: adc@0 {
- compatible = "st,stm32mp1-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>;
- interrupt-parent = <&adc>;
- interrupts = <0>;
- dmas = <&dmamux1 9 0x400 0x01>;
- dma-names = "rx";
- status = "disabled";
- };
-
- adc2: adc@100 {
- compatible = "st,stm32mp1-adc";
- #io-channel-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x100>;
- interrupt-parent = <&adc>;
- interrupts = <1>;
- dmas = <&dmamux1 10 0x400 0x01>;
- dma-names = "rx";
- nvmem-cells = <&vrefint>;
- nvmem-cell-names = "vrefint";
- status = "disabled";
- channel@13 {
- reg = <13>;
- label = "vrefint";
- };
- channel@14 {
- reg = <14>;
- label = "vddcore";
- };
- };
- };
-
- sdmmc3: mmc@48004000 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00253180>;
- reg = <0x48004000 0x400>;
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SDMMC3_K>;
- clock-names = "apb_pclk";
- resets = <&rcc SDMMC3_R>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <120000000>;
- status = "disabled";
- };
-
- usbotg_hs: usb-otg@49000000 {
- compatible = "st,stm32mp15-hsotg", "snps,dwc2";
- reg = <0x49000000 0x10000>;
- clocks = <&rcc USBO_K>, <&usbphyc>;
- clock-names = "otg", "utmi";
- resets = <&rcc USBO_R>;
- reset-names = "dwc2";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <512>;
- g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
- dr_mode = "otg";
- otg-rev = <0x200>;
- usb33d-supply = <&usb33>;
- status = "disabled";
- };
-
ipcc: mailbox@4c001000 {
compatible = "st,stm32mp1-ipcc";
#mbox-cells = <1>;
@@ -1172,18 +136,6 @@
status = "disabled";
};
- dcmi: dcmi@4c006000 {
- compatible = "st,stm32-dcmi";
- reg = <0x4c006000 0x400>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc CAMITF_R>;
- clocks = <&rcc DCMI>;
- clock-names = "mclk";
- dmas = <&dmamux1 75 0x400 0x01>;
- dma-names = "tx";
- status = "disabled";
- };
-
rcc: rcc@50000000 {
compatible = "st,stm32mp1-rcc", "syscon";
reg = <0x50000000 0x1000>;
@@ -1224,6 +176,81 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000d000 0x400>;
+ interrupts-extended =
+ <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */
+ <&intc GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */
+ <&intc GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0>, /* EXTI_20 */
+ <&intc GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */
+ <&intc GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>, /* EXTI_40 */
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */
+ <0>,
+ <&intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>, /* EXTI_60 */
+ <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_70 */
+ <0>,
+ <0>,
+ <&intc GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
};
syscfg: syscon@50020000 {
@@ -1232,131 +259,6 @@
clocks = <&rcc SYSCFG>;
};
- lptimer2: timer@50021000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50021000 0x400>;
- interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM2_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@1 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <1>;
- status = "disabled";
- };
-
- counter {
- compatible = "st,stm32-lptimer-counter";
- status = "disabled";
- };
- };
-
- lptimer3: timer@50022000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-lptimer";
- reg = <0x50022000 0x400>;
- interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM3_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- trigger@2 {
- compatible = "st,stm32-lptimer-trigger";
- reg = <2>;
- status = "disabled";
- };
- };
-
- lptimer4: timer@50023000 {
- compatible = "st,stm32-lptimer";
- reg = <0x50023000 0x400>;
- interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM4_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
- };
-
- lptimer5: timer@50024000 {
- compatible = "st,stm32-lptimer";
- reg = <0x50024000 0x400>;
- interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc LPTIM5_K>;
- clock-names = "mux";
- wakeup-source;
- status = "disabled";
-
- pwm {
- compatible = "st,stm32-pwm-lp";
- #pwm-cells = <3>;
- status = "disabled";
- };
- };
-
- vrefbuf: vrefbuf@50025000 {
- compatible = "st,stm32-vrefbuf";
- reg = <0x50025000 0x8>;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2500000>;
- clocks = <&rcc VREF>;
- status = "disabled";
- };
-
- sai4: sai@50027000 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x50027000 0x400>;
- reg = <0x50027000 0x4>, <0x500273f0 0x10>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rcc SAI4_R>;
- status = "disabled";
-
- sai4a: audio-controller@50027004 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-a";
- reg = <0x04 0x20>;
- clocks = <&rcc SAI4_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 99 0x400 0x01>;
- status = "disabled";
- };
-
- sai4b: audio-controller@50027024 {
- #sound-dai-cells = <0>;
- compatible = "st,stm32-sai-sub-b";
- reg = <0x24 0x20>;
- clocks = <&rcc SAI4_K>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 100 0x400 0x01>;
- status = "disabled";
- };
- };
-
dts: thermal@50028000 {
compatible = "st,stm32-thermal";
reg = <0x50028000 0x100>;
@@ -1367,26 +269,6 @@
status = "disabled";
};
- hash1: hash@54002000 {
- compatible = "st,stm32f756-hash";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc HASH1>;
- resets = <&rcc HASH1_R>;
- dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
- dma-names = "in";
- dma-maxburst = <2>;
- status = "disabled";
- };
-
- rng1: rng@54003000 {
- compatible = "st,stm32-rng";
- reg = <0x54003000 0x400>;
- clocks = <&rcc RNG1_K>;
- resets = <&rcc RNG1_R>;
- status = "disabled";
- };
-
mdma1: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
@@ -1398,55 +280,6 @@
dma-requests = <48>;
};
- fmc: memory-controller@58002000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "st,stm32mp1-fmc2-ebi";
- reg = <0x58002000 0x1000>;
- clocks = <&rcc FMC_K>;
- resets = <&rcc FMC_R>;
- status = "disabled";
-
- ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
- <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
- <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
- <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
- <4 0 0x80000000 0x10000000>; /* NAND */
-
- nand-controller@4,0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32mp1-fmc2-nfc";
- reg = <4 0x00000000 0x1000>,
- <4 0x08010000 0x1000>,
- <4 0x08020000 0x1000>,
- <4 0x01000000 0x1000>,
- <4 0x09010000 0x1000>,
- <4 0x09020000 0x1000>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
- <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
- <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
- dma-names = "tx", "rx", "ecc";
- status = "disabled";
- };
- };
-
- qspi: spi@58003000 {
- compatible = "st,stm32f469-qspi";
- reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
- <&mdma1 22 0x2 0x10100008 0x0 0x0>;
- dma-names = "tx", "rx";
- clocks = <&rcc QSPI_K>;
- resets = <&rcc QSPI_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
sdmmc1: mmc@58005000 {
compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
@@ -1482,39 +315,6 @@
status = "disabled";
};
- ethernet0: ethernet@5800a000 {
- compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
- reg = <0x5800a000 0x2000>;
- reg-names = "stmmaceth";
- interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clock-names = "stmmaceth",
- "mac-clk-tx",
- "mac-clk-rx",
- "eth-ck",
- "ptp_ref",
- "ethstp";
- clocks = <&rcc ETHMAC>,
- <&rcc ETHTX>,
- <&rcc ETHRX>,
- <&rcc ETHCK_K>,
- <&rcc ETHPTP_K>,
- <&rcc ETHSTP>;
- st,syscon = <&syscfg 0x4>;
- snps,mixed-burst;
- snps,pbl = <2>;
- snps,en-tx-lpi-clockgating;
- snps,axi-config = <&stmmac_axi_config_0>;
- snps,tso;
- status = "disabled";
-
- stmmac_axi_config_0: stmmac-axi-config {
- snps,wr_osr_lmt = <0x7>;
- snps,rd_osr_lmt = <0x7>;
- snps,blen = <0 0 0 0 16 8 4>;
- };
- };
-
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
@@ -1580,45 +380,6 @@
};
};
- usart1: serial@5c000000 {
- compatible = "st,stm32h7-uart";
- reg = <0x5c000000 0x400>;
- interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc USART1_K>;
- wakeup-source;
- status = "disabled";
- };
-
- spi6: spi@5c001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x5c001000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc SPI6_K>;
- resets = <&rcc SPI6_R>;
- dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
- <&mdma1 35 0x0 0x40002 0x0 0x0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c4: i2c@5c002000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x5c002000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C4_K>;
- resets = <&rcc I2C4_R>;
- #address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x8>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
- };
-
rtc: rtc@5c004000 {
compatible = "st,stm32mp1-rtc";
reg = <0x5c004000 0x400>;
@@ -1647,20 +408,1406 @@
};
};
- i2c6: i2c@5c009000 {
- compatible = "st,stm32mp15-i2c";
- reg = <0x5c009000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C6_K>;
- resets = <&rcc I2C6_R>;
+ etzpc: bus@5c007000 {
+ compatible = "st,stm32-etzpc", "simple-bus";
+ reg = <0x5c007000 0x400>;
#address-cells = <1>;
- #size-cells = <0>;
- st,syscfg-fmp = <&syscfg 0x4 0x20>;
- wakeup-source;
- i2c-analog-filter;
- status = "disabled";
+ #size-cells = <1>;
+ #access-controller-cells = <1>;
+ ranges;
+
+ timers2: timer@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM2_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 18 0x400 0x1>,
+ <&dmamux1 19 0x400 0x1>,
+ <&dmamux1 20 0x400 0x1>,
+ <&dmamux1 21 0x400 0x1>,
+ <&dmamux1 22 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+ access-controllers = <&etzpc 16>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
+
+ timers3: timer@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM3_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 23 0x400 0x1>,
+ <&dmamux1 24 0x400 0x1>,
+ <&dmamux1 25 0x400 0x1>,
+ <&dmamux1 26 0x400 0x1>,
+ <&dmamux1 27 0x400 0x1>,
+ <&dmamux1 28 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+ access-controllers = <&etzpc 17>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
+
+ timers4: timer@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM4_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 29 0x400 0x1>,
+ <&dmamux1 30 0x400 0x1>,
+ <&dmamux1 31 0x400 0x1>,
+ <&dmamux1 32 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4";
+ access-controllers = <&etzpc 18>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
+
+ timers5: timer@40003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40003000 0x400>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM5_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 55 0x400 0x1>,
+ <&dmamux1 56 0x400 0x1>,
+ <&dmamux1 57 0x400 0x1>,
+ <&dmamux1 58 0x400 0x1>,
+ <&dmamux1 59 0x400 0x1>,
+ <&dmamux1 60 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+ access-controllers = <&etzpc 19>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
+
+ timers6: timer@40004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40004000 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM6_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 69 0x400 0x1>;
+ dma-names = "up";
+ access-controllers = <&etzpc 20>;
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ timers7: timer@40005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40005000 0x400>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM7_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 70 0x400 0x1>;
+ dma-names = "up";
+ access-controllers = <&etzpc 21>;
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timer@40006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40006000 0x400>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ access-controllers = <&etzpc 22>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@40007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40007000 0x400>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ access-controllers = <&etzpc 23>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@40008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40008000 0x400>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ access-controllers = <&etzpc 24>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
+ lptimer1: timer@40009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x40009000 0x400>;
+ interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM1_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controllers = <&etzpc 25>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ i2s2: audio-controller@4000b000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 39 0x400 0x01>,
+ <&dmamux1 40 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 27>;
+ status = "disabled";
+ };
+
+ spi2: spi@4000b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI2_K>;
+ resets = <&rcc SPI2_R>;
+ dmas = <&dmamux1 39 0x400 0x05>,
+ <&dmamux1 40 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 27>;
+ status = "disabled";
+ };
+
+ i2s3: audio-controller@4000c000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x4000c000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 61 0x400 0x01>,
+ <&dmamux1 62 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 28>;
+ status = "disabled";
+ };
+
+ spi3: spi@4000c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x4000c000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI3_K>;
+ resets = <&rcc SPI3_R>;
+ dmas = <&dmamux1 61 0x400 0x05>,
+ <&dmamux1 62 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 28>;
+ status = "disabled";
+ };
+
+ spdifrx: audio-controller@4000d000 {
+ compatible = "st,stm32h7-spdifrx";
+ #sound-dai-cells = <0>;
+ reg = <0x4000d000 0x400>;
+ clocks = <&rcc SPDIF_K>;
+ clock-names = "kclk";
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 93 0x400 0x01>,
+ <&dmamux1 94 0x400 0x01>;
+ dma-names = "rx", "rx-ctrl";
+ access-controllers = <&etzpc 29>;
+ status = "disabled";
+ };
+
+ usart2: serial@4000e000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000e000 0x400>;
+ interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART2_K>;
+ wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x15>,
+ <&dmamux1 44 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 30>;
+ status = "disabled";
+ };
+
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x4000f000 0x400>;
+ interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART3_K>;
+ wakeup-source;
+ dmas = <&dmamux1 45 0x400 0x15>,
+ <&dmamux1 46 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 31>;
+ status = "disabled";
+ };
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART4_K>;
+ wakeup-source;
+ dmas = <&dmamux1 63 0x400 0x15>,
+ <&dmamux1 64 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 32>;
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART5_K>;
+ wakeup-source;
+ dmas = <&dmamux1 65 0x400 0x15>,
+ <&dmamux1 66 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 33>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@40012000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40012000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C1_K>;
+ resets = <&rcc I2C1_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x1>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 34>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40013000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40013000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 35>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40014000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40014000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C3_K>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 36>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@40015000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40015000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C5_K>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 37>;
+ status = "disabled";
+ };
+
+ cec: cec@40016000 {
+ compatible = "st,stm32-cec";
+ reg = <0x40016000 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CEC_K>, <&rcc CEC>;
+ clock-names = "cec", "hdmi-cec";
+ access-controllers = <&etzpc 38>;
+ status = "disabled";
+ };
+
+ dac: dac@40017000 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DAC12>;
+ clock-names = "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&etzpc 39>;
+ status = "disabled";
+
+ dac1: dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channel-cells = <1>;
+ reg = <1>;
+ status = "disabled";
+ };
+
+ dac2: dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channel-cells = <1>;
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART7_K>;
+ wakeup-source;
+ dmas = <&dmamux1 79 0x400 0x15>,
+ <&dmamux1 80 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 40>;
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc UART8_K>;
+ wakeup-source;
+ dmas = <&dmamux1 81 0x400 0x15>,
+ <&dmamux1 82 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 41>;
+ status = "disabled";
+ };
+
+ timers1: timer@44000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44000000 0x400>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "brk", "up", "trg-com", "cc";
+ clocks = <&rcc TIM1_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 11 0x400 0x1>,
+ <&dmamux1 12 0x400 0x1>,
+ <&dmamux1 13 0x400 0x1>,
+ <&dmamux1 14 0x400 0x1>,
+ <&dmamux1 15 0x400 0x1>,
+ <&dmamux1 16 0x400 0x1>,
+ <&dmamux1 17 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
+ access-controllers = <&etzpc 48>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
+
+ timers8: timer@44001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44001000 0x400>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "brk", "up", "trg-com", "cc";
+ clocks = <&rcc TIM8_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 47 0x400 0x1>,
+ <&dmamux1 48 0x400 0x1>,
+ <&dmamux1 49 0x400 0x1>,
+ <&dmamux1 50 0x400 0x1>,
+ <&dmamux1 51 0x400 0x1>,
+ <&dmamux1 52 0x400 0x1>,
+ <&dmamux1 53 0x400 0x1>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
+ access-controllers = <&etzpc 49>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+ };
+
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x44003000 0x400>;
+ interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART6_K>;
+ wakeup-source;
+ dmas = <&dmamux1 71 0x400 0x15>,
+ <&dmamux1 72 0x400 0x11>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 51>;
+ status = "disabled";
+ };
+
+ i2s1: audio-controller@44004000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x44004000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 37 0x400 0x01>,
+ <&dmamux1 38 0x400 0x01>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 52>;
+ status = "disabled";
+ };
+
+ spi1: spi@44004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44004000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI1_K>;
+ resets = <&rcc SPI1_R>;
+ dmas = <&dmamux1 37 0x400 0x05>,
+ <&dmamux1 38 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 52>;
+ status = "disabled";
+ };
+
+ spi4: spi@44005000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44005000 0x400>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI4_K>;
+ resets = <&rcc SPI4_R>;
+ dmas = <&dmamux1 83 0x400 0x05>,
+ <&dmamux1 84 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 53>;
+ status = "disabled";
+ };
+
+ timers15: timer@44006000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44006000 0x400>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x1>,
+ <&dmamux1 106 0x400 0x1>,
+ <&dmamux1 107 0x400 0x1>,
+ <&dmamux1 108 0x400 0x1>;
+ dma-names = "ch1", "up", "trig", "com";
+ access-controllers = <&etzpc 54>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@44007000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44007000 0x400>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x1>,
+ <&dmamux1 110 0x400 0x1>;
+ dma-names = "ch1", "up";
+ access-controllers = <&etzpc 55>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ timer@15 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@44008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x44008000 0x400>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x1>,
+ <&dmamux1 112 0x400 0x1>;
+ dma-names = "ch1", "up";
+ access-controllers = <&etzpc 56>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32h7-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
+ spi5: spi@44009000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x44009000 0x400>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI5_K>;
+ resets = <&rcc SPI5_R>;
+ dmas = <&dmamux1 85 0x400 0x05>,
+ <&dmamux1 86 0x400 0x05>;
+ dma-names = "rx", "tx";
+ access-controllers = <&etzpc 57>;
+ status = "disabled";
+ };
+
+ sai1: sai@4400a000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400a000 0x400>;
+ reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI1_R>;
+ access-controllers = <&etzpc 58>;
+ status = "disabled";
+
+ sai1a: audio-controller@4400a004 {
+ #sound-dai-cells = <0>;
+
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x20>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 87 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai1b: audio-controller@4400a024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x20>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 88 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
+ sai2: sai@4400b000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400b000 0x400>;
+ reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI2_R>;
+ access-controllers = <&etzpc 59>;
+ status = "disabled";
+
+ sai2a: audio-controller@4400b004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x20>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 89 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai2b: audio-controller@4400b024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x20>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 90 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
+ sai3: sai@4400c000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400c000 0x400>;
+ reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI3_R>;
+ access-controllers = <&etzpc 60>;
+ status = "disabled";
+
+ sai3a: audio-controller@4400c004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x04 0x20>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 113 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai3b: audio-controller@4400c024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x20>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 114 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
+ dfsdm: dfsdm@4400d000 {
+ compatible = "st,stm32mp1-dfsdm";
+ reg = <0x4400d000 0x800>;
+ clocks = <&rcc DFSDM_K>;
+ clock-names = "dfsdm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&etzpc 61>;
+ status = "disabled";
+
+ dfsdm0: filter@0 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <0>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 101 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm1: filter@1 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <1>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 102 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm2: filter@2 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <2>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 103 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm3: filter@3 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <3>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 104 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm4: filter@4 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <4>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 91 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dfsdm5: filter@5 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <5>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 92 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+ };
+
+ dma1: dma-controller@48000000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48000000 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA1>;
+ resets = <&rcc DMA1_R>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ access-controllers = <&etzpc 88>;
+ };
+
+ dma2: dma-controller@48001000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48001000 0x400>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc DMA2>;
+ resets = <&rcc DMA2_R>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ access-controllers = <&etzpc 89>;
+ };
+
+ dmamux1: dma-router@48002000 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x48002000 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <128>;
+ dma-masters = <&dma1 &dma2>;
+ dma-channels = <16>;
+ clocks = <&rcc DMAMUX>;
+ resets = <&rcc DMAMUX_R>;
+ access-controllers = <&etzpc 90>;
+ };
+
+ adc: adc@48003000 {
+ compatible = "st,stm32mp1-adc-core";
+ reg = <0x48003000 0x400>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+ clock-names = "bus", "adc";
+ interrupt-controller;
+ st,syscfg = <&syscfg>;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&etzpc 72>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32mp1-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ interrupt-parent = <&adc>;
+ interrupts = <0>;
+ dmas = <&dmamux1 9 0x400 0x01>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ adc2: adc@100 {
+ compatible = "st,stm32mp1-adc";
+ #io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x100>;
+ interrupt-parent = <&adc>;
+ interrupts = <1>;
+ dmas = <&dmamux1 10 0x400 0x01>;
+ dma-names = "rx";
+ nvmem-cells = <&vrefint>;
+ nvmem-cell-names = "vrefint";
+ status = "disabled";
+ channel@13 {
+ reg = <13>;
+ label = "vrefint";
+ };
+ channel@14 {
+ reg = <14>;
+ label = "vddcore";
+ };
+ };
+ };
+
+ sdmmc3: mmc@48004000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00253180>;
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SDMMC3_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC3_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ access-controllers = <&etzpc 86>;
+ status = "disabled";
+ };
+
+ usbotg_hs: usb-otg@49000000 {
+ compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+ reg = <0x49000000 0x10000>;
+ clocks = <&rcc USBO_K>, <&usbphyc>;
+ clock-names = "otg", "utmi";
+ resets = <&rcc USBO_R>;
+ reset-names = "dwc2";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+ dr_mode = "otg";
+ otg-rev = <0x200>;
+ usb33d-supply = <&usb33>;
+ access-controllers = <&etzpc 85>;
+ status = "disabled";
+ };
+
+ dcmi: dcmi@4c006000 {
+ compatible = "st,stm32-dcmi";
+ reg = <0x4c006000 0x400>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc CAMITF_R>;
+ clocks = <&rcc DCMI>;
+ clock-names = "mclk";
+ dmas = <&dmamux1 75 0x400 0x01>;
+ dma-names = "tx";
+ access-controllers = <&etzpc 70>;
+ status = "disabled";
+ };
+
+ lptimer2: timer@50021000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50021000 0x400>;
+ interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controllers = <&etzpc 64>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@50022000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x50022000 0x400>;
+ interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controllers = <&etzpc 65>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ lptimer4: timer@50023000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50023000 0x400>;
+ interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM4_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controllers = <&etzpc 66>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ lptimer5: timer@50024000 {
+ compatible = "st,stm32-lptimer";
+ reg = <0x50024000 0x400>;
+ interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LPTIM5_K>;
+ clock-names = "mux";
+ wakeup-source;
+ access-controllers = <&etzpc 67>;
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ vrefbuf: vrefbuf@50025000 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x50025000 0x8>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ clocks = <&rcc VREF>;
+ access-controllers = <&etzpc 69>;
+ status = "disabled";
+ };
+
+ sai4: sai@50027000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50027000 0x400>;
+ reg = <0x50027000 0x4>, <0x500273f0 0x10>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI4_R>;
+ access-controllers = <&etzpc 68>;
+ status = "disabled";
+
+ sai4a: audio-controller@50027004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x04 0x20>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 99 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai4b: audio-controller@50027024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x20>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 100 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
+ hash1: hash@54002000 {
+ compatible = "st,stm32f756-hash";
+ reg = <0x54002000 0x400>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc HASH1>;
+ resets = <&rcc HASH1_R>;
+ dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
+ dma-names = "in";
+ dma-maxburst = <2>;
+ access-controllers = <&etzpc 8>;
+ status = "disabled";
+ };
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ access-controllers = <&etzpc 7>;
+ status = "disabled";
+ };
+
+ fmc: memory-controller@58002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp1-fmc2-ebi";
+ reg = <0x58002000 0x1000>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ access-controllers = <&etzpc 91>;
+ status = "disabled";
+
+ ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+ <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+ <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+ <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+ <4 0 0x80000000 0x10000000>; /* NAND */
+
+ nand-controller@4,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp1-fmc2-nfc";
+ reg = <4 0x00000000 0x1000>,
+ <4 0x08010000 0x1000>,
+ <4 0x08020000 0x1000>,
+ <4 0x01000000 0x1000>,
+ <4 0x09010000 0x1000>,
+ <4 0x09020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+ <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+ <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+ dma-names = "tx", "rx", "ecc";
+ status = "disabled";
+ };
+ };
+
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+ <&mdma1 22 0x2 0x10100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&etzpc 92>;
+ status = "disabled";
+ };
+
+ ethernet0: ethernet@5800a000 {
+ compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "eth-ck",
+ "ptp_ref",
+ "ethstp";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHCK_K>,
+ <&rcc ETHPTP_K>,
+ <&rcc ETHSTP>;
+ st,syscon = <&syscfg 0x4>;
+ snps,mixed-burst;
+ snps,pbl = <2>;
+ snps,en-tx-lpi-clockgating;
+ snps,axi-config = <&stmmac_axi_config_0>;
+ snps,tso;
+ access-controllers = <&etzpc 94>;
+ status = "disabled";
+
+ stmmac_axi_config_0: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+ };
+
+ usart1: serial@5c000000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x5c000000 0x400>;
+ interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc USART1_K>;
+ wakeup-source;
+ access-controllers = <&etzpc 3>;
+ status = "disabled";
+ };
+
+ spi6: spi@5c001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x5c001000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI6_K>;
+ resets = <&rcc SPI6_R>;
+ dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+ <&mdma1 35 0x0 0x40002 0x0 0x0>;
+ access-controllers = <&etzpc 4>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x5c002000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 5>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@5c009000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x5c009000 0x400>;
+ interrupt-names = "event", "error";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C6_K>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ st,syscfg-fmp = <&syscfg 0x4 0x20>;
+ wakeup-source;
+ i2c-analog-filter;
+ access-controllers = <&etzpc 12>;
+ status = "disabled";
+ };
};
tamp: tamp@5c00a000 {
diff --git a/dts/upstream/src/arm/st/stm32mp153.dtsi b/dts/upstream/src/arm/st/stm32mp153.dtsi
index 486084e..4640daf 100644
--- a/dts/upstream/src/arm/st/stm32mp153.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp153.dtsi
@@ -28,32 +28,34 @@
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
+};
- soc {
- m_can1: can@4400e000 {
- compatible = "bosch,m_can";
- reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
- reg-names = "m_can", "message_ram";
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
- status = "disabled";
- };
+&etzpc {
+ m_can1: can@4400e000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ access-controllers = <&etzpc 62>;
+ status = "disabled";
+ };
- m_can2: can@4400f000 {
- compatible = "bosch,m_can";
- reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
- reg-names = "m_can", "message_ram";
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
- status = "disabled";
- };
+ m_can2: can@4400f000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+ access-controllers = <&etzpc 62>;
+ status = "disabled";
};
};
diff --git a/dts/upstream/src/arm/st/stm32mp157c-ed1.dts b/dts/upstream/src/arm/st/stm32mp157c-ed1.dts
index 66ed5f9..9cf5ed1 100644
--- a/dts/upstream/src/arm/st/stm32mp157c-ed1.dts
+++ b/dts/upstream/src/arm/st/stm32mp157c-ed1.dts
@@ -10,6 +10,7 @@
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mfd/st,stpmic1.h>
/ {
@@ -71,6 +72,17 @@
};
};
+ led {
+ compatible = "gpio-leds";
+ led-blue {
+ gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
sd_switch: regulator-sd_switch {
compatible = "regulator-gpio";
regulator-name = "sd_switch";
diff --git a/dts/upstream/src/arm/st/stm32mp15xc.dtsi b/dts/upstream/src/arm/st/stm32mp15xc.dtsi
index b06a55a..9746571 100644
--- a/dts/upstream/src/arm/st/stm32mp15xc.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp15xc.dtsi
@@ -4,15 +4,14 @@
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
-/ {
- soc {
- cryp1: cryp@54001000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54001000 0x400>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
+&etzpc {
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ access-controllers = <&etzpc 9>;
+ status = "disabled";
};
};
diff --git a/dts/upstream/src/arm/ti/keystone/keystone-k2g.dtsi b/dts/upstream/src/arm/ti/keystone/keystone-k2g.dtsi
index 790b29a..dafe485 100644
--- a/dts/upstream/src/arm/ti/keystone/keystone-k2g.dtsi
+++ b/dts/upstream/src/arm/ti/keystone/keystone-k2g.dtsi
@@ -256,11 +256,6 @@
pmmc: system-controller@2921c00 {
compatible = "ti,k2g-sci";
- /*
- * In case of rare platforms that does not use k2g as
- * system master, use /delete-property/
- */
- ti,system-reboot-controller;
mbox-names = "rx", "tx";
mboxes = <&msgmgr 5 2>,
<&msgmgr 0 0>;
diff --git a/dts/upstream/src/arm/ti/omap/am33xx.dtsi b/dts/upstream/src/arm/ti/omap/am33xx.dtsi
index 989d5a6..0614ffd 100644
--- a/dts/upstream/src/arm/ti/omap/am33xx.dtsi
+++ b/dts/upstream/src/arm/ti/omap/am33xx.dtsi
@@ -80,7 +80,7 @@
* because the can not be enabled simultaneously on a
* single SoC.
*/
- opp-50-300000000{
+ opp-50-300000000 {
/* OPP50 */
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <950000 931000 969000>;
@@ -88,7 +88,7 @@
opp-suspend;
};
- opp-100-275000000{
+ opp-100-275000000 {
/* OPP100-1 */
opp-hz = /bits/ 64 <275000000>;
opp-microvolt = <1100000 1078000 1122000>;
@@ -96,7 +96,7 @@
opp-suspend;
};
- opp-100-300000000{
+ opp-100-300000000 {
/* OPP100-2 */
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1100000 1078000 1122000>;
@@ -104,7 +104,7 @@
opp-suspend;
};
- opp-100-500000000{
+ opp-100-500000000 {
/* OPP100-3 */
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1100000 1078000 1122000>;
diff --git a/dts/upstream/src/arm/ti/omap/am4372.dtsi b/dts/upstream/src/arm/ti/omap/am4372.dtsi
index 5fd1b38..0a1df30 100644
--- a/dts/upstream/src/arm/ti/omap/am4372.dtsi
+++ b/dts/upstream/src/arm/ti/omap/am4372.dtsi
@@ -92,7 +92,7 @@
opp-supported-hw = <0xFF 0x08>;
};
- opp-800000000{
+ opp-800000000 {
/* OPP Turbo */
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1260000 1234800 1285200>;
diff --git a/dts/upstream/src/arm/ti/omap/dra76x.dtsi b/dts/upstream/src/arm/ti/omap/dra76x.dtsi
index 1045eb2..50a02c3 100644
--- a/dts/upstream/src/arm/ti/omap/dra76x.dtsi
+++ b/dts/upstream/src/arm/ti/omap/dra76x.dtsi
@@ -84,35 +84,44 @@
};
&scm_conf_clocks {
- dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll_gmac_x2_ck>;
- ti,max-div = <63>;
- reg = <0x03fc>;
- ti,bit-shift = <20>;
- ti,latch-bit = <26>;
- assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
- assigned-clock-rates = <80000000>;
- };
-
- dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+ /* CTRL_CORE_SMA_SW_0 */
+ clock@3fc {
+ compatible = "ti,clksel";
reg = <0x3fc>;
- ti,bit-shift = <29>;
- ti,latch-bit = <26>;
- assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
- assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
- };
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_gmac_h14x2_ctrl_ck: clock@20 {
+ reg = <20>;
+ clock-output-names = "dpll_gmac_h14x2_ctrl_ck";
+ compatible = "ti,divider-clock";
+ clocks = <&dpll_gmac_x2_ck>;
+ ti,max-div = <63>;
+ ti,latch-bit = <26>;
+ assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+ assigned-clock-rates = <80000000>;
+ #clock-cells = <0>;
+ };
- mcan_clk: mcan_clk@3fc {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
- ti,bit-shift = <27>;
- reg = <0x3fc>;
+ mcan_clk: clock@27 {
+ reg = <27>;
+ clock-output-names = "mcan_clk";
+ compatible = "ti,gate-clock";
+ clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+ #clock-cells = <0>;
+ };
+
+ dpll_gmac_h14x2_ctrl_mux_ck: clock@29 {
+ reg = <29>;
+ clock-output-names = "dpll_gmac_h14x2_ctrl_mux_ck";
+ compatible = "ti,mux-clock";
+ clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+ ti,latch-bit = <26>;
+ assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+ assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+ #clock-cells = <0>;
+ };
};
};
diff --git a/dts/upstream/src/arm/ti/omap/dra7xx-clocks.dtsi b/dts/upstream/src/arm/ti/omap/dra7xx-clocks.dtsi
index 06466d3..04f08b8 100644
--- a/dts/upstream/src/arm/ti/omap/dra7xx-clocks.dtsi
+++ b/dts/upstream/src/arm/ti/omap/dra7xx-clocks.dtsi
@@ -285,13 +285,21 @@
ti,invert-autoidle-bit;
};
- dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_core_byp_mux";
- clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
- ti,bit-shift = <23>;
- reg = <0x012c>;
+ /* CM_CLKSEL_DPLL_CORE */
+ clock@12c {
+ compatible = "ti,clksel";
+ reg = <0x12c>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_core_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_core_byp_mux";
+ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+ #clock-cells = <0>;
+ };
};
dpll_core_ck: clock@120 {
@@ -368,13 +376,21 @@
clock-div = <1>;
};
- dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_dsp_byp_mux";
- clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
- ti,bit-shift = <23>;
- reg = <0x0240>;
+ /* CM_CLKSEL_DPLL_DSP */
+ clock@240 {
+ compatible = "ti,clksel";
+ reg = <0x240>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_dsp_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_dsp_byp_mux";
+ clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+ #clock-cells = <0>;
+ };
};
dpll_dsp_ck: clock@234 {
@@ -410,13 +426,21 @@
clock-div = <1>;
};
- dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_iva_byp_mux";
- clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
- ti,bit-shift = <23>;
- reg = <0x01ac>;
+ /* CM_CLKSEL_DPLL_IVA */
+ clock@1ac {
+ compatible = "ti,clksel";
+ reg = <0x1ac>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_iva_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_iva_byp_mux";
+ clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+ #clock-cells = <0>;
+ };
};
dpll_iva_ck: clock@1a0 {
@@ -452,13 +476,21 @@
clock-div = <1>;
};
- dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_gpu_byp_mux";
- clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
- ti,bit-shift = <23>;
- reg = <0x02e4>;
+ /* CM_CLKSEL_DPLL_GPU */
+ clock@2e4 {
+ compatible = "ti,clksel";
+ reg = <0x2e4>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_gpu_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_gpu_byp_mux";
+ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+ #clock-cells = <0>;
+ };
};
dpll_gpu_ck: clock@2d8 {
@@ -506,13 +538,21 @@
clock-div = <1>;
};
- dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_ddr_byp_mux";
- clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
- ti,bit-shift = <23>;
- reg = <0x021c>;
+ /* CM_CLKSEL_DPLL_DDR */
+ clock@21c {
+ compatible = "ti,clksel";
+ reg = <0x21c>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_ddr_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_ddr_byp_mux";
+ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+ #clock-cells = <0>;
+ };
};
dpll_ddr_ck: clock@210 {
@@ -535,13 +575,21 @@
ti,invert-autoidle-bit;
};
- dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_gmac_byp_mux";
- clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
- ti,bit-shift = <23>;
- reg = <0x02b4>;
+ /* CM_CLKSEL_DPLL_GMAC */
+ clock@2b4 {
+ compatible = "ti,clksel";
+ reg = <0x2b4>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_gmac_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_gmac_byp_mux";
+ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+ #clock-cells = <0>;
+ };
};
dpll_gmac_ck: clock@2a8 {
@@ -618,13 +666,21 @@
clock-div = <1>;
};
- dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_eve_byp_mux";
- clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
- ti,bit-shift = <23>;
- reg = <0x0290>;
+ /* CM_CLKSEL_DPLL_EVE */
+ clock@290 {
+ compatible = "ti,clksel";
+ reg = <0x290>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_eve_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_eve_byp_mux";
+ clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+ #clock-cells = <0>;
+ };
};
dpll_eve_ck: clock@284 {
@@ -838,15 +894,23 @@
clock-div = <1>;
};
- l3_iclk_div: clock-l3-iclk-div-4@100 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clock-output-names = "l3_iclk_div";
- ti,max-div = <2>;
- ti,bit-shift = <4>;
- reg = <0x0100>;
- clocks = <&dpll_core_h12x2_ck>;
- ti,index-power-of-two;
+ /* CM_CLKSEL_CORE */
+ clock@100 {
+ compatible = "ti,clksel";
+ reg = <0x100>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ l3_iclk_div: clock@4 {
+ reg = <4>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3_iclk_div";
+ ti,max-div = <2>;
+ clocks = <&dpll_core_h12x2_ck>;
+ ti,index-power-of-two;
+ #clock-cells = <0>;
+ };
};
l4_root_clk_div: clock-l4-root-clk-div {
@@ -911,12 +975,21 @@
ti,index-starts-at-one;
};
- abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "abe_dpll_sys_clk_mux";
- clocks = <&sys_clkin1>, <&sys_clkin2>;
- reg = <0x0118>;
+ /* CM_CLKSEL_ABE_PLL_SYS */
+ clock@118 {
+ compatible = "ti,clksel";
+ reg = <0x118>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ abe_dpll_sys_clk_mux: clock@0 {
+ reg = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_sys_clk_mux";
+ clocks = <&sys_clkin1>, <&sys_clkin2>;
+ #clock-cells = <0>;
+ };
};
abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
@@ -1018,14 +1091,23 @@
ti,index-power-of-two;
};
- dsp_gclk_div: clock-dsp-gclk-div@18c {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clock-output-names = "dsp_gclk_div";
- clocks = <&dpll_dsp_m2_ck>;
- ti,max-div = <64>;
- reg = <0x018c>;
- ti,index-power-of-two;
+ /* CM_CLKSEL_DPLL_USB */
+ clock@18c {
+ compatible = "ti,clksel";
+ reg = <0x18c>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsp_gclk_div: clock@0 {
+ reg = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dsp_gclk_div";
+ clocks = <&dpll_dsp_m2_ck>;
+ ti,max-div = <64>;
+ ti,index-power-of-two;
+ #clock-cells = <0>;
+ };
};
gpu_dclk: clock-gpu-dclk@1a0 {
@@ -1326,13 +1408,21 @@
clock-div = <1>;
};
- dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_per_byp_mux";
- clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
- ti,bit-shift = <23>;
- reg = <0x014c>;
+ /* CM_CLKSEL_DPLL_PER */
+ clock@14c {
+ compatible = "ti,clksel";
+ reg = <0x14c>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_per_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_per_byp_mux";
+ clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+ #clock-cells = <0>;
+ };
};
dpll_per_ck: clock@140 {
@@ -1364,13 +1454,21 @@
clock-div = <1>;
};
- dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clock-output-names = "dpll_usb_byp_mux";
- clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
- ti,bit-shift = <23>;
- reg = <0x018c>;
+ /* CM_CLKSEL_DPLL_USB */
+ clock@18c {
+ compatible = "ti,clksel";
+ reg = <0x18c>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll_usb_byp_mux: clock@23 {
+ reg = <23>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "dpll_usb_byp_mux";
+ clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+ #clock-cells = <0>;
+ };
};
dpll_usb_ck: clock@180 {
diff --git a/dts/upstream/src/arm/ti/omap/omap3-n900.dts b/dts/upstream/src/arm/ti/omap/omap3-n900.dts
index d334853..07c5b96 100644
--- a/dts/upstream/src/arm/ti/omap/omap3-n900.dts
+++ b/dts/upstream/src/arm/ti/omap/omap3-n900.dts
@@ -754,7 +754,7 @@
ti,current-limit = <100>;
ti,weak-battery-voltage = <3400>;
ti,battery-regulation-voltage = <4200>;
- ti,charge-current = <650>;
+ ti,charge-current = <950>;
ti,termination-current = <100>;
ti,resistor-sense = <68>;
diff --git a/dts/upstream/src/arm64/actions/s700-cubieboard7.dts b/dts/upstream/src/arm64/actions/s700-cubieboard7.dts
index 63e375c..bd54b51 100644
--- a/dts/upstream/src/arm64/actions/s700-cubieboard7.dts
+++ b/dts/upstream/src/arm64/actions/s700-cubieboard7.dts
@@ -24,7 +24,7 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- memory@1,e0000000 {
+ memory@1e0000000 {
device_type = "memory";
reg = <0x1 0xe0000000 0x0 0x0>;
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
index e6d5bc0..d1f415a 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
@@ -53,7 +53,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts
index 0af6dcd..dec9960 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts
@@ -41,7 +41,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-olinuxino.dts
index bfb806c..fd37946 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-olinuxino.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-olinuxino.dts
@@ -52,7 +52,7 @@
status = "okay";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-orangepi-win.dts
index 4f8529d..c8303a6 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-orangepi-win.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-orangepi-win.dts
@@ -68,7 +68,7 @@
status = "okay";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts
index 50ed2e9..6c65d5b 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts
@@ -79,7 +79,7 @@
enable-active-high;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinephone.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
index 8784711..6eab61a 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
@@ -39,25 +39,35 @@
leds {
compatible = "gpio-leds";
- led-0 {
+ led0: led-0 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ retain-state-suspended;
};
- led-1 {
+ led1: led-1 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+ retain-state-suspended;
};
- led-2 {
+ led2: led-2 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+ retain-state-suspended;
};
};
+ multi-led {
+ compatible = "leds-group-multicolor";
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ leds = <&led0>, <&led1>, <&led2>;
+ };
+
reg_ps: ps-regulator {
compatible = "regulator-fixed";
regulator-name = "ps";
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts
index 0a5607f..c6007df 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts
@@ -98,7 +98,7 @@
enable-active-high;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
post-power-on-delay-ms = <200>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-teres-i.dts
index 1128030..b407e1d 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-teres-i.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-teres-i.dts
@@ -74,7 +74,7 @@
status = "okay";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi
index 57ac187..ce4aa44 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi
@@ -107,27 +107,19 @@
gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
- opp-120000000 {
- opp-hz = /bits/ 64 <120000000>;
- };
-
- opp-312000000 {
- opp-hz = /bits/ 64 <312000000>;
- };
-
opp-432000000 {
opp-hz = /bits/ 64 <432000000>;
};
};
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc32k: osc32k_clk {
+ osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -216,21 +208,21 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_alert1: cpu_alert1 {
+ cpu_alert1: cpu-alert1 {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <110000>;
hysteresis = <2000>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h313-tanix-tx1.dts b/dts/upstream/src/arm64/allwinner/sun50i-h313-tanix-tx1.dts
new file mode 100644
index 0000000..bb2cde5
--- /dev/null
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h313-tanix-tx1.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Tanix TX1";
+ compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &sdio_wifi;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key {
+ label = "hidden";
+ linux,code = <BTN_0>;
+ gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ default-state = "on";
+ };
+ };
+
+ wifi_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "ext_clock";
+ pinctrl-0 = <&x32clk_fanout_pin>;
+ pinctrl-names = "default";
+ reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <&reg_dldo1>;
+ vqmmc-supply = <&reg_aldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ sdio_wifi: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_dldo1>;
+ vqmmc-supply = <&reg_aldo1>;
+ bus-width = <8>;
+ non-removable;
+ max-frequency = <100000000>;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <&reg_aldo1>;
+ vcc-pf-supply = <&reg_dldo1>;
+ vcc-pg-supply = <&reg_aldo1>;
+ vcc-ph-supply = <&reg_dldo1>;
+ vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp313: pmic@36 {
+ compatible = "x-powers,axp313a";
+ reg = <0x36>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+
+ vin1-supply = <&reg_vcc5v>;
+ vin2-supply = <&reg_vcc5v>;
+ vin3-supply = <&reg_vcc5v>;
+
+ regulators {
+ /* Supplies VCC-PLL, so needs to be always on. */
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ /* Supplies VCC-IO, so needs to be always on. */
+ reg_dldo1: dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3";
+ };
+
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd-dram";
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host"; /* USB A type receptable */
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 4c3921a..b69032c 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -68,7 +68,7 @@
states = <1100000 0>, <1300000 1>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
post-power-on-delay-ms = <200>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts
index a3e040d..3a7ee44 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -103,7 +103,7 @@
states = <1100000 0x0>, <1300000 0x1>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
post-power-on-delay-ms = <200>;
@@ -170,7 +170,7 @@
non-removable;
status = "okay";
- rtl8189etv: sdio_wifi@1 {
+ rtl8189etv: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts b/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
index d7f8bad..b699bb9 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
@@ -85,7 +85,7 @@
status = "okay";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts b/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts
index 7ec5ac8..ae85131 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -97,7 +97,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- rtl8189ftv: sdio_wifi@1 {
+ rtl8189ftv: wifi@1 {
reg = <1>;
};
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index 22530ac..734481e 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -52,7 +52,7 @@
regulator-max-microvolt = <3300000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts b/dts/upstream/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
index 381d58c..3be1e8c 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
@@ -34,7 +34,7 @@
};
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-3.dts b/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
index 6fc65e8..6c3bfe3 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
@@ -33,7 +33,7 @@
};
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts b/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts
index fb31dcb..a3f65a4 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -11,7 +11,7 @@
serial1 = &uart1; /* BT-UART */
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
index 9274512..13b0714 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
@@ -32,7 +32,7 @@
};
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts b/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
index b710f1a..66fe039 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -5,13 +5,13 @@
#include "sun50i-h6-pine-h64.dts"
+/delete-node/ &reg_gmac_3v3;
+
/ {
model = "Pine H64 model B";
compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
- /delete-node/ reg_gmac_3v3;
-
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts b/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts
index 1ffd68f..3910393 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts
@@ -22,7 +22,7 @@
stdout-path = "serial0:115200n8";
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi
index d11e504..8a8591c 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi
@@ -68,7 +68,7 @@
status = "disabled";
};
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
index af421ba..d12b01c 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -62,6 +63,10 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&mmc0 {
vmmc-supply = <&reg_dldo1>;
/* Card detection pin is not connected */
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi
new file mode 100644
index 0000000..aca22a7
--- /dev/null
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2023 Martin Botka <martin@somainline.org>
+
+/ {
+ cpu_opp_table: opp-table-cpu {
+ compatible = "allwinner,sun50i-h616-operating-points";
+ nvmem-cells = <&cpu_speed_grade>;
+ opp-shared;
+
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x1f>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x12>;
+ };
+
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0d>;
+ };
+
+ opp-792000000 {
+ opp-hz = /bits/ 64 <792000000>;
+ opp-microvolt-speed1 = <900000>;
+ opp-microvolt-speed4 = <940000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x12>;
+ };
+
+ opp-936000000 {
+ opp-hz = /bits/ 64 <936000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0d>;
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt-speed0 = <950000>;
+ opp-microvolt-speed1 = <940000>;
+ opp-microvolt-speed2 = <950000>;
+ opp-microvolt-speed3 = <950000>;
+ opp-microvolt-speed4 = <1020000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x1f>;
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt-speed0 = <1000000>;
+ opp-microvolt-speed2 = <1000000>;
+ opp-microvolt-speed3 = <1000000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0d>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-speed0 = <1050000>;
+ opp-microvolt-speed1 = <1020000>;
+ opp-microvolt-speed2 = <1050000>;
+ opp-microvolt-speed3 = <1050000>;
+ opp-microvolt-speed4 = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x1f>;
+ };
+
+ opp-1320000000 {
+ opp-hz = /bits/ 64 <1320000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x1d>;
+ };
+
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0d>;
+ };
+
+ opp-1512000000 {
+ opp-hz = /bits/ 64 <1512000000>;
+ opp-microvolt-speed1 = <1100000>;
+ opp-microvolt-speed3 = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0a>;
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts b/dts/upstream/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts
index b5d7139..a360d85 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -6,12 +6,17 @@
/dts-v1/;
#include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
/ {
model = "OrangePi Zero2";
compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
};
+&cpu0 {
+ cpu-supply = <&reg_dcdca>;
+};
+
&emac0 {
allwinner,rx-delay-ps = <3100>;
allwinner,tx-delay-ps = <700>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h616-x96-mate.dts b/dts/upstream/src/arm64/allwinner/sun50i-h616-x96-mate.dts
index 959b6fd..26d25b5 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h616-x96-mate.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h616-x96-mate.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -32,6 +33,10 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdca>;
+};
+
&ehci0 {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi
index b2e85e5..921d5f6 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi
@@ -26,6 +26,7 @@
reg = <0>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -34,6 +35,7 @@
reg = <1>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
@@ -42,6 +44,7 @@
reg = <2>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
@@ -50,6 +53,7 @@
reg = <3>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
+ #cooling-cells = <2>;
};
};
@@ -156,6 +160,10 @@
ths_calibration: thermal-sensor-calibration@14 {
reg = <0x14 0x8>;
};
+
+ cpu_speed_grade: cpu-speed-grade@0 {
+ reg = <0x0 2>;
+ };
};
watchdog: watchdog@30090a0 {
@@ -194,7 +202,7 @@
};
i2c0_pins: i2c0-pins {
- pins = "PI6", "PI7";
+ pins = "PI5", "PI6";
function = "i2c0";
};
@@ -775,6 +783,15 @@
#reset-cells = <1>;
};
+ nmi_intc: interrupt-controller@7010320 {
+ compatible = "allwinner,sun50i-h616-nmi",
+ "allwinner,sun9i-a80-nmi";
+ reg = <0x07010320 0xc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
r_pio: pinctrl@7022000 {
compatible = "allwinner,sun50i-h616-r-pinctrl";
reg = <0x07022000 0x400>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi
index 8c1263a..e92d150 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi
@@ -4,6 +4,11 @@
*/
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
&mmc2 {
pinctrl-names = "default";
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts b/dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts
index 21ca197..6a4f0da 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -53,6 +54,10 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&ehci1 {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts b/dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts
index b3b1b86..e1cd757 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -6,12 +6,17 @@
/dts-v1/;
#include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
/ {
model = "OrangePi Zero3";
compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&emac0 {
allwinner,tx-delay-ps = <700>;
phy-mode = "rgmii-rxid";
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts b/dts/upstream/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
index ac0a2b7..d6631bf 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -41,7 +42,7 @@
regulator-always-on;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
@@ -51,6 +52,10 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&ehci0 {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts b/dts/upstream/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts
index b6e3c16..ce90327 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts
@@ -42,7 +42,7 @@
regulator-always-on;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
post-power-on-delay-ms = <200>;
@@ -191,7 +191,7 @@
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en;
vin1-supply = <&reg_vcc5v>;
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
new file mode 100644
index 0000000..ee30584
--- /dev/null
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Anbernic RG35XX 2024";
+ chassis-type = "handset";
+ compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio_keys_gamepad: gpio-keys-gamepad {
+ compatible = "gpio-keys";
+
+ button-a {
+ label = "Action-Pad A";
+ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_EAST>;
+ };
+
+ button-b {
+ label = "Action-Pad B";
+ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_SOUTH>;
+ };
+
+ button-down {
+ label = "D-Pad Down";
+ gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_DPAD_DOWN>;
+ };
+
+ button-l1 {
+ label = "Key L1";
+ gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_TL>;
+ };
+
+ button-l2 {
+ label = "Key L2";
+ gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_TL2>;
+ };
+
+ button-left {
+ label = "D-Pad left";
+ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_DPAD_LEFT>;
+ };
+
+ button-menu {
+ label = "Key Menu";
+ gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_MODE>;
+ };
+
+ button-r1 {
+ label = "Key R1";
+ gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_TR>;
+ };
+
+ button-r2 {
+ label = "Key R2";
+ gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_TR2>;
+ };
+
+ button-right {
+ label = "D-Pad Right";
+ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_DPAD_RIGHT>;
+ };
+
+ button-select {
+ label = "Key Select";
+ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_SELECT>;
+ };
+ button-start {
+ label = "Key Start";
+ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_START>;
+ };
+
+ button-up {
+ label = "D-Pad Up";
+ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_DPAD_UP>;
+ };
+
+ button-x {
+ label = "Action-Pad X";
+ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_NORTH>;
+ };
+
+ button-y {
+ label = "Action Pad Y";
+ gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_WEST>;
+ };
+ };
+
+ gpio-keys-volume {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button-vol-up {
+ label = "Key Volume Up";
+ gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ button-vol-down {
+ label = "Key Volume Down";
+ gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */
+ default-state = "on";
+ };
+ };
+
+ reg_vcc5v: regulator-vcc5v { /* USB-C power input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc1>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_cldo3>;
+ disable-wp;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pa-supply = <&reg_cldo3>;
+ vcc-pc-supply = <&reg_cldo3>;
+ vcc-pe-supply = <&reg_cldo3>;
+ vcc-pf-supply = <&reg_cldo3>;
+ vcc-pg-supply = <&reg_aldo4>;
+ vcc-ph-supply = <&reg_cldo3>;
+ vcc-pi-supply = <&reg_cldo3>;
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp717: pmic@3a3 {
+ compatible = "x-powers,axp717";
+ reg = <0x3a3>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ vin1-supply = <&reg_vcc5v>;
+ vin2-supply = <&reg_vcc5v>;
+ vin3-supply = <&reg_vcc5v>;
+ vin4-supply = <&reg_vcc5v>;
+
+ regulators {
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <940000>;
+ regulator-max-microvolt = <940000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-dram";
+ };
+
+ reg_aldo1: aldo1 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo2: aldo2 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo3: aldo3 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo4: aldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+ };
+
+ reg_bldo1: bldo1 {
+ /* 1.8v - unused */
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pll";
+ };
+
+ reg_bldo3: bldo3 {
+ /* 2.8v - unused */
+ };
+
+ reg_bldo4: bldo4 {
+ /* 1.2v - unused */
+ };
+
+ reg_cldo1: cldo1 {
+ /* 3.3v - audio codec - not yet implemented */
+ };
+
+ reg_cldo2: cldo2 {
+ /* 3.3v - unused */
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-io";
+ };
+
+ reg_cldo4: cldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+ };
+
+ reg_boost: boost {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5200000>;
+ regulator-name = "boost";
+ };
+
+ reg_cpusldo: cpusldo {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */
+&usbotg {
+ dr_mode = "peripheral"; /* USB type-C receptable */
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
new file mode 100644
index 0000000..6303625
--- /dev/null
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+ model = "Anbernic RG35XX H";
+ compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700";
+};
+
+&gpio_keys_gamepad {
+ button-thumbl {
+ label = "GPIO Thumb Left";
+ gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ label = "GPIO Thumb Right";
+ gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_THUMBR>;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
new file mode 100644
index 0000000..60a8e49
--- /dev/null
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-2024.dts"
+
+/ {
+ model = "Anbernic RG35XX Plus";
+ compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700";
+
+ wifi_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "ext_clock";
+ pinctrl-0 = <&x32clk_fanout_pin>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+ };
+};
+
+/* SDIO WiFi RTL8821CS */
+&mmc1 {
+ vmmc-supply = <&reg_cldo4>;
+ vqmmc-supply = <&reg_aldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ sdio_wifi: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */
+ interrupt-names = "host-wake";
+ };
+};
+
+/* Bluetooth RTL8821CS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+ device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+ enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */
+ host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */
+ };
+};
diff --git a/dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi b/dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi
index 072fe20..cbbc53c 100644
--- a/dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi
+++ b/dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi
@@ -79,7 +79,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <0 170 4>,
<0 171 4>,
<0 172 4>,
diff --git a/dts/upstream/src/arm64/amazon/alpine-v2.dtsi b/dts/upstream/src/arm64/amazon/alpine-v2.dtsi
index dbf2dce..da9de49 100644
--- a/dts/upstream/src/arm64/amazon/alpine-v2.dtsi
+++ b/dts/upstream/src/arm64/amazon/alpine-v2.dtsi
@@ -39,6 +39,7 @@
/ {
model = "Annapurna Labs Alpine v2";
compatible = "al,alpine-v2";
+ interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
@@ -89,6 +90,22 @@
clock-frequency = <1000000>;
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -97,22 +114,6 @@
interrupt-parent = <&gic>;
ranges;
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- };
-
gic: interrupt-controller@f0200000 {
compatible = "arm,gic-v3";
reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */
@@ -150,7 +151,7 @@
al,msi-num-spis = <160>;
};
- io-fabric {
+ io-fabric@fc000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/upstream/src/arm64/amazon/alpine-v3.dtsi b/dts/upstream/src/arm64/amazon/alpine-v3.dtsi
index 3ea178a..8b6156b 100644
--- a/dts/upstream/src/arm64/amazon/alpine-v3.dtsi
+++ b/dts/upstream/src/arm64/amazon/alpine-v3.dtsi
@@ -244,7 +244,7 @@
next-level-cache = <&cluster3_l2>;
};
- cluster0_l2: cache@0 {
+ cluster0_l2: cache-0 {
compatible = "cache";
cache-size = <0x200000>;
cache-line-size = <64>;
@@ -253,7 +253,7 @@
cache-unified;
};
- cluster1_l2: cache@100 {
+ cluster1_l2: cache-100 {
compatible = "cache";
cache-size = <0x200000>;
cache-line-size = <64>;
@@ -262,7 +262,7 @@
cache-unified;
};
- cluster2_l2: cache@200 {
+ cluster2_l2: cache-200 {
compatible = "cache";
cache-size = <0x200000>;
cache-line-size = <64>;
@@ -271,7 +271,7 @@
cache-unified;
};
- cluster3_l2: cache@300 {
+ cluster3_l2: cache-300 {
compatible = "cache";
cache-size = <0x200000>;
cache-line-size = <64>;
@@ -318,7 +318,7 @@
#size-cells = <2>;
ranges;
- gic: interrupt-controller@f0000000 {
+ gic: interrupt-controller@f0800000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-controller;
@@ -361,7 +361,7 @@
interrupt-parent = <&gic>;
};
- io-fabric {
+ io-fabric@fc000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/upstream/src/arm64/amd/elba-16core.dtsi b/dts/upstream/src/arm64/amd/elba-16core.dtsi
index 568bcc3..6c1b7b8 100644
--- a/dts/upstream/src/arm64/amd/elba-16core.dtsi
+++ b/dts/upstream/src/arm64/amd/elba-16core.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Copyright 2020-2023 Advanced Micro Devices, Inc.
*/
diff --git a/dts/upstream/src/arm64/amd/elba-asic-common.dtsi b/dts/upstream/src/arm64/amd/elba-asic-common.dtsi
index 46b6c67..d12e9a7 100644
--- a/dts/upstream/src/arm64/amd/elba-asic-common.dtsi
+++ b/dts/upstream/src/arm64/amd/elba-asic-common.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Copyright 2020-2022 Advanced Micro Devices, Inc.
*/
diff --git a/dts/upstream/src/arm64/amd/elba-asic.dts b/dts/upstream/src/arm64/amd/elba-asic.dts
index c3f4da2..20b0fa0 100644
--- a/dts/upstream/src/arm64/amd/elba-asic.dts
+++ b/dts/upstream/src/arm64/amd/elba-asic.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Device Tree file for AMD Pensando Elba Board.
*
diff --git a/dts/upstream/src/arm64/amd/elba-flash-parts.dtsi b/dts/upstream/src/arm64/amd/elba-flash-parts.dtsi
index cf761a0..6ea2d77 100644
--- a/dts/upstream/src/arm64/amd/elba-flash-parts.dtsi
+++ b/dts/upstream/src/arm64/amd/elba-flash-parts.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Copyright 2020-2023 Advanced Micro Devices, Inc.
*/
diff --git a/dts/upstream/src/arm64/amd/elba.dtsi b/dts/upstream/src/arm64/amd/elba.dtsi
index 674890c..758bce0 100644
--- a/dts/upstream/src/arm64/amd/elba.dtsi
+++ b/dts/upstream/src/arm64/amd/elba.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Copyright 2020-2022 Advanced Micro Devices, Inc.
*/
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-a4-a113l2-ba400.dts b/dts/upstream/src/arm64/amlogic/amlogic-a4-a113l2-ba400.dts
new file mode 100644
index 0000000..ad3127e
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/amlogic-a4-a113l2-ba400.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a4.dtsi"
+
+/ {
+ model = "Amlogic A113L2 ba400 Development Board";
+ compatible = "amlogic,ba400", "amlogic,a4";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_b;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 10 MiB reserved for ARM Trusted Firmware */
+ secmon_reserved: secmon@5000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x05000000 0x0 0xa00000>;
+ no-map;
+ };
+ };
+};
+
+&uart_b {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-a4-common.dtsi b/dts/upstream/src/arm64/amlogic/amlogic-a4-common.dtsi
new file mode 100644
index 0000000..b6106ad
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/amlogic-a4-common.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+/ {
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@fff01000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xfff01000 0 0x1000>,
+ <0x0 0xfff02000 0 0x2000>,
+ <0x0 0xfff04000 0 0x2000>,
+ <0x0 0xfff06000 0 0x2000>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb: bus@fe000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xfe000000 0x0 0x480000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+ uart_b: serial@7a000 {
+ compatible = "amlogic,a4-uart",
+ "amlogic,meson-s4-uart";
+ reg = <0x0 0x7a000 0x0 0x18>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-a4.dtsi b/dts/upstream/src/arm64/amlogic/amlogic-a4.dtsi
new file mode 100644
index 0000000..73ca1d7
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/amlogic-a4.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include "amlogic-a4-common.dtsi"
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+};
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-a5-a113x2-av400.dts b/dts/upstream/src/arm64/amlogic/amlogic-a5-a113x2-av400.dts
new file mode 100644
index 0000000..11d8b88
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/amlogic-a5-a113x2-av400.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a5.dtsi"
+
+/ {
+ model = "Amlogic A113X2 av400 Development Board";
+ compatible = "amlogic,av400", "amlogic,a5";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_b;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 10 MiB reserved for ARM Trusted Firmware */
+ secmon_reserved: secmon@5000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x05000000 0x0 0xa00000>;
+ no-map;
+ };
+ };
+};
+
+&uart_b {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-a5.dtsi b/dts/upstream/src/arm64/amlogic/amlogic-a5.dtsi
new file mode 100644
index 0000000..43f68a7
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/amlogic-a5.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include "amlogic-a4-common.dtsi"
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ };
+ };
+};
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-t7-reset.h b/dts/upstream/src/arm64/amlogic/amlogic-t7-reset.h
new file mode 100644
index 0000000..ec90a11
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/amlogic-t7-reset.h
@@ -0,0 +1,197 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_T7_RESET_H
+#define __DTS_AMLOGIC_T7_RESET_H
+
+/* RESET0 */
+/* 0-3 */
+#define RESET_USB 4
+#define RESET_U2DRD 5
+#define RESET_U3DRD 6
+#define RESET_U3DRD_PIPE0 7
+#define RESET_U2PHY20 8
+#define RESET_U2PHY21 9
+#define RESET_GDC 10
+#define RESET_HDMI20_AES 11
+#define RESET_HDMIRX 12
+#define RESET_HDMIRX_APB 13
+#define RESET_DEWARP 14
+/* 15 */
+#define RESET_HDMITX_CAPB3 16
+#define RESET_BRG_VCBUG_DEC 17
+#define RESET_VCBUS 18
+#define RESET_VID_PLL_DIV 19
+#define RESET_VDI6 20
+#define RESET_GE2D 21
+#define RESET_HDMITXPHY 22
+#define RESET_VID_LOCK 23
+#define RESET_VENC0 24
+#define RESET_VDAC 25
+#define RESET_VENC2 26
+#define RESET_VENC1 27
+#define RESET_RDMA 28
+#define RESET_HDMITX 29
+#define RESET_VIU 30
+#define RESET_VENC 31
+
+/* RESET1 */
+#define RESET_AUDIO 32
+#define RESET_MALI_CAPB3 33
+#define RESET_MALI 34
+#define RESET_DDR_APB 35
+#define RESET_DDR 36
+#define RESET_DOS_CAPB3 37
+#define RESET_DOS 38
+#define RESET_COMBO_DPHY_CHAN2 39
+#define RESET_DEBUG_B 40
+#define RESET_DEBUG_A 41
+#define RESET_DSP_B 42
+#define RESET_DSP_A 43
+#define RESET_PCIE_A 44
+#define RESET_PCIE_PHY 45
+#define RESET_PCIE_APB 46
+#define RESET_ANAKIN 47
+#define RESET_ETH 48
+#define RESET_EDP0_CTRL 49
+#define RESET_EDP1_CTRL 50
+#define RESET_COMBO_DPHY_CHAN0 51
+#define RESET_COMBO_DPHY_CHAN1 52
+#define RESET_DSI_LVDS_EDP_TOP 53
+#define RESET_PCIE1_PHY 54
+#define RESET_PCIE1_APB 55
+#define RESET_DDR_1 56
+/* 57 */
+#define RESET_EDP1_PIPELINE 58
+#define RESET_EDP0_PIPELINE 59
+#define RESET_MIPI_DSI1_PHY 60
+#define RESET_MIPI_DSI0_PHY 61
+#define RESET_MIPI_DSI_A_HOST 62
+#define RESET_MIPI_DSI_B_HOST 63
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB 64
+#define RESET_IR_CTRL 65
+#define RESET_TS_A73 66
+#define RESET_TS_A53 67
+#define RESET_SPICC_2 68
+#define RESET_SPICC_3 69
+#define RESET_SPICC_4 70
+#define RESET_SPICC_5 71
+#define RESET_SMART_CARD 72
+#define RESET_SPICC_0 73
+#define RESET_SPICC_1 74
+#define RESET_RSA 75
+/* 76-79 */
+#define RESET_MSR_CLK 80
+#define RESET_SPIFC 81
+#define RESET_SAR_ADC 82
+#define RESET_BT 83
+/* 84-87 */
+#define RESET_ACODEC 88
+#define RESET_CEC 89
+#define RESET_AFIFO 90
+#define RESET_WATCHDOG 91
+/* 92-95 */
+
+/* RESET3 */
+#define RESET_BRG_NIC1_GPV 96
+#define RESET_BRG_NIC2_GPV 97
+#define RESET_BRG_NIC3_GPV 98
+#define RESET_BRG_NIC4_GPV 99
+#define RESET_BRG_NIC5_GPV 100
+/* 101-121 */
+#define RESET_MIPI_ISP 122
+#define RESET_BRG_ADB_MALI_1 123
+#define RESET_BRG_ADB_MALI_0 124
+#define RESET_BRG_ADB_A73 125
+#define RESET_BRG_ADB_A53 126
+#define RESET_BRG_CCI 127
+
+/* RESET4 */
+#define RESET_PWM_AO_AB 128
+#define RESET_PWM_AO_CD 129
+#define RESET_PWM_AO_EF 130
+#define RESET_PWM_AO_GH 131
+#define RESET_PWM_AB 132
+#define RESET_PWM_CD 133
+#define RESET_PWM_EF 134
+/* 135-137 */
+#define RESET_UART_A 138
+#define RESET_UART_B 139
+#define RESET_UART_C 140
+#define RESET_UART_D 141
+#define RESET_UART_E 142
+#define RESET_UART_F 143
+#define RESET_I2C_S_A 144
+#define RESET_I2C_M_A 145
+#define RESET_I2C_M_B 146
+#define RESET_I2C_M_C 147
+#define RESET_I2C_M_D 148
+#define RESET_I2C_M_E 149
+#define RESET_I2C_M_F 150
+#define RESET_I2C_M_AO_A 151
+#define RESET_SD_EMMC_A 152
+#define RESET_SD_EMMC_B 153
+#define RESET_SD_EMMC_C 154
+#define RESET_I2C_M_AO_B 155
+#define RESET_TS_GPU 156
+#define RESET_TS_NNA 157
+#define RESET_TS_VPN 158
+#define RESET_TS_HEVC 159
+
+/* RESET5 */
+#define RESET_BRG_NOC_DDR_1 160
+#define RESET_BRG_NOC_DDR_0 161
+#define RESET_BRG_NOC_MAIN 162
+#define RESET_BRG_NOC_ALL 163
+/* 164-167 */
+#define RESET_BRG_NIC2_SYS 168
+#define RESET_BRG_NIC2_MAIN 169
+#define RESET_BRG_NIC2_HDMI 170
+#define RESET_BRG_NIC2_ALL 171
+#define RESET_BRG_NIC3_WAVE 172
+#define RESET_BRG_NIC3_VDEC 173
+#define RESET_BRG_NIC3_HEVCF 174
+#define RESET_BRG_NIC3_HEVCB 175
+#define RESET_BRG_NIC3_HCODEC 176
+#define RESET_BRG_NIC3_GE2D 177
+#define RESET_BRG_NIC3_GDC 178
+#define RESET_BRG_NIC3_AMLOGIC 179
+#define RESET_BRG_NIC3_MAIN 180
+#define RESET_BRG_NIC3_ALL 181
+#define RESET_BRG_NIC5_VPU 182
+/* 183-185 */
+#define RESET_BRG_NIC4_DSPB 186
+#define RESET_BRG_NIC4_DSPA 187
+#define RESET_BRG_NIC4_VAPB 188
+#define RESET_BRG_NIC4_CLK81 189
+#define RESET_BRG_NIC4_MAIN 190
+#define RESET_BRG_NIC4_ALL 191
+
+/* RESET6 */
+#define RESET_BRG_VDEC_PIPEL 192
+#define RESET_BRG_HEVCF_DMC_PIPEL 193
+#define RESET_BRG_NIC2TONIC4_PIPEL 194
+#define RESET_BRG_HDMIRXTONIC2_PIPEL 195
+#define RESET_BRG_SECTONIC4_PIPEL 196
+#define RESET_BRG_VPUTONOC_PIPEL 197
+#define RESET_BRG_NIC4TONOC_PIPEL 198
+#define RESET_BRG_NIC3TONOC_PIPEL 199
+#define RESET_BRG_NIC2TONOC_PIPEL 200
+#define RESET_BRG_NNATONOC_PIPEL 201
+#define RESET_BRG_FRISP3_PIPEL 202
+#define RESET_BRG_FRISP2_PIPEL 203
+#define RESET_BRG_FRISP1_PIPEL 204
+#define RESET_BRG_FRISP0_PIPEL 205
+/* 206-217 */
+#define RESET_BRG_AMPIPE_NAND 218
+#define RESET_BRG_AMPIPE_ETH 219
+/* 220 */
+#define RESET_BRG_AM2AXI0 221
+#define RESET_BRG_AM2AXI1 222
+#define RESET_BRG_AM2AXI2 223
+
+#endif /* ___DTS_AMLOGIC_T7_RESET_H */
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-t7.dtsi b/dts/upstream/src/arm64/amlogic/amlogic-t7.dtsi
index 5248bdf..c23efc6 100644
--- a/dts/upstream/src/arm64/amlogic/amlogic-t7.dtsi
+++ b/dts/upstream/src/arm64/amlogic/amlogic-t7.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/amlogic,t7-pwrc.h>
+#include "amlogic-t7-reset.h"
/ {
interrupt-parent = <&gic>;
@@ -149,6 +150,12 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+ reset: reset-controller@2000 {
+ compatible = "amlogic,t7-reset";
+ reg = <0x0 0x2000 0x0 0x98>;
+ #reset-cells = <1>;
+ };
+
watchdog@2100 {
compatible = "amlogic,t7-wdt";
reg = <0x0 0x2100 0x0 0x10>;
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi b/dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi
index 9d5eab6..b058ed7 100644
--- a/dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi
@@ -1663,9 +1663,28 @@
<250000000>,
<0>; /* Do Nothing */
};
+
+ mipi_analog_dphy: phy {
+ compatible = "amlogic,g12a-mipi-dphy-analog";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
};
+ mipi_dphy: phy@44000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0x0 0x44000 0x0 0x2000>;
+ clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+ clock-names = "pclk";
+ resets = <&reset RESET_MIPI_DSI_PHY>;
+ reset-names = "phy";
+ phys = <&mipi_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
usb3_pcie_phy: phy@46000 {
compatible = "amlogic,g12a-usb3-pcie-phy";
reg = <0x0 0x46000 0x0 0x2000>;
@@ -2152,6 +2171,15 @@
remote-endpoint = <&hdmi_tx_in>;
};
};
+
+ /* DPI output port */
+ dpi_port: port@2 {
+ reg = <2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&mipi_dsi_in>;
+ };
+ };
};
gic: interrupt-controller@ffc01000 {
@@ -2189,6 +2217,48 @@
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
};
+ mipi_dsi: dsi@7000 {
+ compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+ reg = <0x0 0x7000 0x0 0x1000>;
+ resets = <&reset RESET_MIPI_DSI_HOST>;
+ reset-names = "top";
+ clocks = <&clkc CLKID_MIPI_DSI_HOST>,
+ <&clkc CLKID_MIPI_DSI_PXCLK>,
+ <&clkc CLKID_CTS_ENCL>;
+ clock-names = "pclk", "bit", "px";
+ phys = <&mipi_dphy>;
+ phy-names = "dphy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ assigned-clocks = <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+ <&clkc CLKID_CTS_ENCL_SEL>,
+ <&clkc CLKID_VCLK2_SEL>;
+ assigned-clock-parents = <&clkc CLKID_GP0_PLL>,
+ <&clkc CLKID_VCLK2_DIV1>,
+ <&clkc CLKID_GP0_PLL>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ mipi_dsi_venc_port: port@0 {
+ reg = <0>;
+
+ mipi_dsi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ /* DSI Output */
+ mipi_dsi_panel_port: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
watchdog: watchdog@f0d0 {
compatible = "amlogic,meson-gxbb-wdt";
reg = <0x0 0xf0d0 0x0 0x10>;
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/dts/upstream/src/arm64/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
new file mode 100644
index 0000000..003efed
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ * Copyright 2023 MNT Research GmbH
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ model = "MNT Reform 2 with BPI-CM4 Module";
+ compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+ chassis-type = "laptop";
+
+ aliases {
+ ethernet0 = &ethmac;
+ i2c0 = &i2c1;
+ i2c1 = &i2c3;
+ };
+
+ hdmi_connector: hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "MNT-REFORM2-BPI-CM4";
+ audio-widgets = "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker",
+ "Microphone", "Mic Jack";
+ audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>;
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TDMIN_B IN 1", "TDM_B Capture",
+ "TDMIN_B IN 4", "TDM_B Loopback",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "External Speaker", "SPK_LP",
+ "External Speaker", "SPK_LN",
+ "External Speaker", "SPK_RP",
+ "External Speaker", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-6 {
+ sound-dai = <&tdmif_a>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+ };
+ };
+
+ /* Analog Audio */
+ dai-link-7 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&wm8960>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-8 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+
+ reg_main_1v8: regulator-main-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&reg_main_3v3>;
+ };
+
+ reg_main_1v2: regulator-main-1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&reg_main_5v>;
+ };
+
+ reg_main_3v3: regulator-main-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_main_5v: regulator-main-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_main_usb: regulator-main-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_main_5v>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm_AO_ab 0 10000 0>;
+ power-supply = <&reg_main_usb>;
+ enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+ brightness-levels = <0 32 64 128 160 200 255>;
+ default-brightness-level = <6>;
+ };
+
+ panel {
+ compatible = "innolux,n125hce-gn1";
+ power-supply = <&reg_main_3v3>;
+ backlight = <&backlight>;
+ no-hpd;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&edp_bridge_out>;
+ };
+ };
+ };
+
+ clock_12288: clock_12288 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+};
+
+&mipi_analog_dphy {
+ status = "okay";
+};
+
+&mipi_dphy {
+ status = "okay";
+};
+
+&mipi_dsi {
+ status = "okay";
+
+ assigned-clocks = <&clkc CLKID_GP0_PLL>,
+ <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+ <&clkc CLKID_MIPI_DSI_PXCLK>,
+ <&clkc CLKID_CTS_ENCL_SEL>,
+ <&clkc CLKID_VCLK2_SEL>;
+ assigned-clock-parents = <0>,
+ <&clkc CLKID_GP0_PLL>,
+ <0>,
+ <&clkc CLKID_VCLK2_DIV1>,
+ <&clkc CLKID_GP0_PLL>;
+ assigned-clock-rates = <936000000>,
+ <0>,
+ <936000000>,
+ <0>,
+ <0>;
+};
+
+&mipi_dsi_panel_port {
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&edp_bridge_in>;
+ };
+};
+
+&cecb_AO {
+ status = "okay";
+};
+
+&ethmac {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&pwm_AO_ab {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_ao_a_pins>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ edp_bridge: bridge@2c {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+ enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8
+ vccio-supply = <&reg_main_1v8>;
+ vpll-supply = <&reg_main_1v8>;
+ vcca-supply = <&reg_main_1v2>;
+ vcc-supply = <&reg_main_1v2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ edp_bridge_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ edp_bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ wm8960: codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clock_12288>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ wlf,shared-lrclk;
+ };
+
+ rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&sd_emmc_b {
+ status = "okay";
+};
+
+&tdmif_a {
+ status = "okay";
+};
+
+&tdmout_a {
+ status = "okay";
+};
+
+&tdmif_b {
+ pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+ pinctrl-names = "default";
+
+ assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+ <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+ assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+ assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/amlogic/meson-khadas-vim3-ts050.dtso b/dts/upstream/src/arm64/amlogic/meson-khadas-vim3-ts050.dtso
new file mode 100644
index 0000000..a41b4e6
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/meson-khadas-vim3-ts050.dtso
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Enable Khadas TS050 DSI Panel + Touch Controller
+ * on Khadas VIM3 (A311D) and VIM3L (S905D3)
+ */
+
+&{/} {
+ panel_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm_AO_cd 0 25000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <200>;
+ };
+};
+
+&i2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ touch-controller@38 {
+ compatible = "edt,edt-ft5206";
+ reg = <0x38>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <IRQID_GPIOA_5 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ status = "okay";
+ };
+};
+
+&mipi_dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ assigned-clocks = <&clkc CLKID_GP0_PLL>,
+ <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+ <&clkc CLKID_MIPI_DSI_PXCLK>,
+ <&clkc CLKID_CTS_ENCL_SEL>,
+ <&clkc CLKID_VCLK2_SEL>;
+ assigned-clock-parents = <0>,
+ <&clkc CLKID_GP0_PLL>,
+ <0>,
+ <&clkc CLKID_VCLK2_DIV1>,
+ <&clkc CLKID_GP0_PLL>;
+ assigned-clock-rates = <960000000>,
+ <0>,
+ <960000000>,
+ <0>,
+ <0>;
+
+ panel@0 {
+ compatible = "khadas,ts050";
+ reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vcc_3v3>;
+ backlight = <&panel_backlight>;
+ reg = <0>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+};
+
+&mipi_analog_dphy {
+ status = "okay";
+};
+
+&mipi_dphy {
+ status = "okay";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>;
+};
diff --git a/dts/upstream/src/arm64/amlogic/meson-s4.dtsi b/dts/upstream/src/arm64/amlogic/meson-s4.dtsi
index ce90b35..10896f9 100644
--- a/dts/upstream/src/arm64/amlogic/meson-s4.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-s4.dtsi
@@ -65,10 +65,15 @@
#clock-cells = <0>;
};
- pwrc: power-controller {
- compatible = "amlogic,meson-s4-pwrc";
- #power-domain-cells = <1>;
- status = "okay";
+ firmware {
+ sm: secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
+
+ pwrc: power-controller {
+ compatible = "amlogic,meson-s4-pwrc";
+ #power-domain-cells = <1>;
+ };
+ };
};
soc {
diff --git a/dts/upstream/src/arm64/apm/apm-merlin.dts b/dts/upstream/src/arm64/apm/apm-merlin.dts
index 2e80690..6e05cf1a 100644
--- a/dts/upstream/src/arm64/apm/apm-merlin.dts
+++ b/dts/upstream/src/arm64/apm/apm-merlin.dts
@@ -15,7 +15,7 @@
chosen { };
- memory {
+ memory@100000000 {
device_type = "memory";
reg = < 0x1 0x00000000 0x0 0x80000000 >;
};
diff --git a/dts/upstream/src/arm64/apm/apm-mustang.dts b/dts/upstream/src/arm64/apm/apm-mustang.dts
index 033e10e..e7644cd 100644
--- a/dts/upstream/src/arm64/apm/apm-mustang.dts
+++ b/dts/upstream/src/arm64/apm/apm-mustang.dts
@@ -15,7 +15,7 @@
chosen { };
- memory {
+ memory@100000000 {
device_type = "memory";
reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
};
diff --git a/dts/upstream/src/arm64/apm/apm-shadowcat.dtsi b/dts/upstream/src/arm64/apm/apm-shadowcat.dtsi
index 65ebac3..ea5721e 100644
--- a/dts/upstream/src/arm64/apm/apm-shadowcat.dtsi
+++ b/dts/upstream/src/arm64/apm/apm-shadowcat.dtsi
@@ -211,6 +211,13 @@
};
};
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk";
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <1 12 0xff04>;
@@ -236,13 +243,6 @@
#size-cells = <2>;
ranges;
- refclk: refclk {
- compatible = "fixed-clock";
- #clock-cells = <1>;
- clock-frequency = <100000000>;
- clock-output-names = "refclk";
- };
-
pmdpll: pmdpll@170000f0 {
compatible = "apm,xgene-pcppll-v2-clock";
#clock-cells = <1>;
diff --git a/dts/upstream/src/arm64/apm/apm-storm.dtsi b/dts/upstream/src/arm64/apm/apm-storm.dtsi
index 988928c..532401b 100644
--- a/dts/upstream/src/arm64/apm/apm-storm.dtsi
+++ b/dts/upstream/src/arm64/apm/apm-storm.dtsi
@@ -112,6 +112,13 @@
interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
};
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 0 0xff08>, /* Secure Phys IRQ */
@@ -122,7 +129,7 @@
};
pmu {
- compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+ compatible = "apm,potenza-pmu";
interrupts = <1 12 0xff04>;
};
@@ -137,12 +144,6 @@
#address-cells = <2>;
#size-cells = <2>;
ranges;
- refclk: refclk {
- compatible = "fixed-clock";
- #clock-cells = <1>;
- clock-frequency = <100000000>;
- clock-output-names = "refclk";
- };
pcppll: pcppll@17000100 {
compatible = "apm,xgene-pcppll-clock";
diff --git a/dts/upstream/src/arm64/arm/juno-base.dtsi b/dts/upstream/src/arm64/arm/juno-base.dtsi
index b897f55..98ed2b3 100644
--- a/dts/upstream/src/arm64/arm/juno-base.dtsi
+++ b/dts/upstream/src/arm64/arm/juno-base.dtsi
@@ -773,14 +773,14 @@
};
};
- big_cluster_thermal_zone: big-cluster-thermal {
+ big_cluster_thermal_zone: big-cl-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 21>;
status = "disabled";
};
- little_cluster_thermal_zone: little-cluster-thermal {
+ little_cluster_thermal_zone: little-cl-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 22>;
diff --git a/dts/upstream/src/arm64/arm/juno-scmi.dtsi b/dts/upstream/src/arm64/arm/juno-scmi.dtsi
index 31929e2..f38c5b6 100644
--- a/dts/upstream/src/arm64/arm/juno-scmi.dtsi
+++ b/dts/upstream/src/arm64/arm/juno-scmi.dtsi
@@ -84,11 +84,11 @@
thermal-sensors = <&scmi_sensors0 3>;
};
- big-cluster-thermal {
+ big-cl-thermal {
thermal-sensors = <&scmi_sensors0 21>;
};
- little-cluster-thermal {
+ little-cl-thermal {
thermal-sensors = <&scmi_sensors0 22>;
};
diff --git a/dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
index 8db4243..9115c99 100644
--- a/dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -102,7 +102,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/dts/upstream/src/arm64/broadcom/bcmbca/bcm4908.dtsi b/dts/upstream/src/arm64/broadcom/bcmbca/bcm4908.dtsi
index e01cf4f..8b92481 100644
--- a/dts/upstream/src/arm64/broadcom/bcmbca/bcm4908.dtsi
+++ b/dts/upstream/src/arm64/broadcom/bcmbca/bcm4908.dtsi
@@ -594,6 +594,7 @@
reg-names = "nand", "nand-int-base";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "nand_ctlrdy";
+ brcm,wp-not-connected;
status = "disabled";
nandcs: nand@0 {
diff --git a/dts/upstream/src/arm64/broadcom/bcmbca/bcm94908.dts b/dts/upstream/src/arm64/broadcom/bcmbca/bcm94908.dts
index 030ffa5..e5b3764 100644
--- a/dts/upstream/src/arm64/broadcom/bcmbca/bcm94908.dts
+++ b/dts/upstream/src/arm64/broadcom/bcmbca/bcm94908.dts
@@ -34,7 +34,6 @@
};
&nand_controller {
- brcm,wp-not-connected;
status = "okay";
};
diff --git a/dts/upstream/src/arm64/broadcom/northstar2/ns2-svk.dts b/dts/upstream/src/arm64/broadcom/northstar2/ns2-svk.dts
index dec5a11..f43cfe6 100644
--- a/dts/upstream/src/arm64/broadcom/northstar2/ns2-svk.dts
+++ b/dts/upstream/src/arm64/broadcom/northstar2/ns2-svk.dts
@@ -50,7 +50,7 @@
bootargs = "earlycon=uart8250,mmio32,0x66130000";
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
};
diff --git a/dts/upstream/src/arm64/broadcom/northstar2/ns2-xmc.dts b/dts/upstream/src/arm64/broadcom/northstar2/ns2-xmc.dts
index 1d314f1..c50df1d 100644
--- a/dts/upstream/src/arm64/broadcom/northstar2/ns2-xmc.dts
+++ b/dts/upstream/src/arm64/broadcom/northstar2/ns2-xmc.dts
@@ -47,7 +47,7 @@
bootargs = "earlycon=uart8250,mmio32,0x66130000";
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
};
diff --git a/dts/upstream/src/arm64/broadcom/northstar2/ns2.dtsi b/dts/upstream/src/arm64/broadcom/northstar2/ns2.dtsi
index 896d1f3..cfd9fd2 100644
--- a/dts/upstream/src/arm64/broadcom/northstar2/ns2.dtsi
+++ b/dts/upstream/src/arm64/broadcom/northstar2/ns2.dtsi
@@ -102,7 +102,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a57-pmu";
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/broadcom/stingray/stingray.dtsi b/dts/upstream/src/arm64/broadcom/stingray/stingray.dtsi
index d8516ec..857fa42 100644
--- a/dts/upstream/src/arm64/broadcom/stingray/stingray.dtsi
+++ b/dts/upstream/src/arm64/broadcom/stingray/stingray.dtsi
@@ -142,7 +142,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a72-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/dts/upstream/src/arm64/cavium/thunder-88xx.dtsi b/dts/upstream/src/arm64/cavium/thunder-88xx.dtsi
index 8ad31de..cc860a8 100644
--- a/dts/upstream/src/arm64/cavium/thunder-88xx.dtsi
+++ b/dts/upstream/src/arm64/cavium/thunder-88xx.dtsi
@@ -361,24 +361,24 @@
};
pmu {
- compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3";
+ compatible = "cavium,thunder-pmu";
interrupts = <1 7 4>;
};
+ refclk50mhz: refclk50mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "refclk50mhz";
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
- refclk50mhz: refclk50mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <50000000>;
- clock-output-names = "refclk50mhz";
- };
-
- gic0: interrupt-controller@8010,00000000 {
+ gic0: interrupt-controller@801000000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <2>;
@@ -397,7 +397,7 @@
};
};
- uaa0: serial@87e0,24000000 {
+ uaa0: serial@87e024000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x87e0 0x24000000 0x0 0x1000>;
interrupts = <1 21 4>;
@@ -405,7 +405,7 @@
clock-names = "apb_pclk";
};
- uaa1: serial@87e0,25000000 {
+ uaa1: serial@87e025000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x87e0 0x25000000 0x0 0x1000>;
interrupts = <1 22 4>;
diff --git a/dts/upstream/src/arm64/cavium/thunder2-99xx.dts b/dts/upstream/src/arm64/cavium/thunder2-99xx.dts
index d005e1e..89fc410 100644
--- a/dts/upstream/src/arm64/cavium/thunder2-99xx.dts
+++ b/dts/upstream/src/arm64/cavium/thunder2-99xx.dts
@@ -14,7 +14,7 @@
model = "Cavium ThunderX2 CN99XX";
compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
<0x00000008 0x80000000 0x0 0x80000000>; /* 2G @ 34G */
diff --git a/dts/upstream/src/arm64/cavium/thunder2-99xx.dtsi b/dts/upstream/src/arm64/cavium/thunder2-99xx.dtsi
index 3419bd2..6dfe78a 100644
--- a/dts/upstream/src/arm64/cavium/thunder2-99xx.dtsi
+++ b/dts/upstream/src/arm64/cavium/thunder2-99xx.dtsi
@@ -83,7 +83,7 @@
};
pmu {
- compatible = "brcm,vulcan-pmu", "arm,armv8-pmuv3";
+ compatible = "brcm,vulcan-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */
};
@@ -103,7 +103,6 @@
/* ECAM at 0x3000_0000 - 0x4000_0000 */
reg = <0x0 0x30000000 0x0 0x10000000>;
- reg-names = "PCI ECAM";
/*
* PCI ranges:
diff --git a/dts/upstream/src/arm64/exynos/exynos5433.dtsi b/dts/upstream/src/arm64/exynos/exynos5433.dtsi
index 7fbbec0..0b9053b 100644
--- a/dts/upstream/src/arm64/exynos/exynos5433.dtsi
+++ b/dts/upstream/src/arm64/exynos/exynos5433.dtsi
@@ -1468,6 +1468,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
num-cs = <1>;
+ fifo-depth = <256>;
status = "disabled";
};
@@ -1487,6 +1488,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
num-cs = <1>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -1506,6 +1508,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
num-cs = <1>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -1525,6 +1528,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi3_bus>;
num-cs = <1>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -1544,6 +1548,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi4_bus>;
num-cs = <1>;
+ fifo-depth = <64>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm64/exynos/exynos850.dtsi b/dts/upstream/src/arm64/exynos/exynos850.dtsi
index 2ba67c3..0706c85 100644
--- a/dts/upstream/src/arm64/exynos/exynos850.dtsi
+++ b/dts/upstream/src/arm64/exynos/exynos850.dtsi
@@ -93,6 +93,8 @@
compatible = "arm,cortex-a55";
reg = <0x0>;
enable-method = "psci";
+ clocks = <&cmu_cpucl0 CLK_CLUSTER0_SCLK>;
+ clock-names = "cluster0_clk";
};
cpu1: cpu@1 {
device_type = "cpu";
@@ -117,6 +119,8 @@
compatible = "arm,cortex-a55";
reg = <0x100>;
enable-method = "psci";
+ clocks = <&cmu_cpucl1 CLK_CLUSTER1_SCLK>;
+ clock-names = "cluster1_clk";
};
cpu5: cpu@101 {
device_type = "cpu";
@@ -254,6 +258,28 @@
"dout_peri_uart", "dout_peri_ip";
};
+ cmu_cpucl1: clock-controller@10800000 {
+ compatible = "samsung,exynos850-cmu-cpucl1";
+ reg = <0x10800000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL1_SWITCH>,
+ <&cmu_top CLK_DOUT_CPUCL1_DBG>;
+ clock-names = "oscclk", "dout_cpucl1_switch",
+ "dout_cpucl1_dbg";
+ };
+
+ cmu_cpucl0: clock-controller@10900000 {
+ compatible = "samsung,exynos850-cmu-cpucl0";
+ reg = <0x10900000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL0_SWITCH>,
+ <&cmu_top CLK_DOUT_CPUCL0_DBG>;
+ clock-names = "oscclk", "dout_cpucl0_switch",
+ "dout_cpucl0_dbg";
+ };
+
cmu_g3d: clock-controller@11400000 {
compatible = "samsung,exynos850-cmu-g3d";
reg = <0x11400000 0x8000>;
diff --git a/dts/upstream/src/arm64/exynos/exynosautov9.dtsi b/dts/upstream/src/arm64/exynos/exynosautov9.dtsi
index c871a2f..0248329 100644
--- a/dts/upstream/src/arm64/exynos/exynosautov9.dtsi
+++ b/dts/upstream/src/arm64/exynos/exynosautov9.dtsi
@@ -435,6 +435,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <256>;
status = "disabled";
};
@@ -526,6 +527,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <256>;
status = "disabled";
};
@@ -617,6 +619,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -708,6 +711,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -799,6 +803,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -890,6 +895,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -981,6 +987,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <256>;
status = "disabled";
};
@@ -1072,6 +1079,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -1163,6 +1171,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -1254,6 +1263,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -1345,6 +1355,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
@@ -1434,6 +1445,7 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ fifo-depth = <64>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm64/exynos/google/gs101-oriole.dts b/dts/upstream/src/arm64/exynos/google/gs101-oriole.dts
index 6ccade2..5e8ffe0 100644
--- a/dts/upstream/src/arm64/exynos/google/gs101-oriole.dts
+++ b/dts/upstream/src/arm64/exynos/google/gs101-oriole.dts
@@ -29,8 +29,8 @@
gpio-keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+ pinctrl-names = "default";
button-vol-down {
label = "KEY_VOLUMEDOWN";
@@ -53,6 +53,21 @@
wakeup-source;
};
};
+
+ /* TODO: Remove this once PMIC is implemented */
+ reg_placeholder: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "placeholder_reg";
+ };
+
+ /* TODO: Remove this once S2MPG11 slave PMIC is implemented */
+ ufs_0_fixed_vcc_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "ufs-vcc";
+ gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ enable-active-high;
+ };
};
&ext_24_5m {
@@ -103,8 +118,33 @@
};
&serial_0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_bus>;
+ status = "okay";
+};
+
+&ufs_0 {
+ status = "okay";
+ vcc-supply = <&ufs_0_fixed_vcc_reg>;
+};
+
+&ufs_0_phy {
+ status = "okay";
+};
+
+&usbdrd31 {
+ status = "okay";
+ vdd10-supply = <&reg_placeholder>;
+ vdd33-supply = <&reg_placeholder>;
+};
+
+&usbdrd31_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+ role-switch-default-mode = "peripheral";
+ maximum-speed = "super-speed-plus";
+ status = "okay";
+};
+
+&usbdrd31_phy {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/exynos/google/gs101.dtsi b/dts/upstream/src/arm64/exynos/google/gs101.dtsi
index 55e6bcb..a66e996 100644
--- a/dts/upstream/src/arm64/exynos/google/gs101.dtsi
+++ b/dts/upstream/src/arm64/exynos/google/gs101.dtsi
@@ -370,12 +370,398 @@
pinctrl_peric0: pinctrl@10840000 {
compatible = "google,gs101-pinctrl";
reg = <0x10840000 0x00001000>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK>;
+ clock-names = "pclk";
interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
};
+ usi1: usi@109000c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x109000c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x1000>;
+ status = "disabled";
+
+ hsi2c_1: i2c@10900000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10900000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c1_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_1: serial@10900000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10900000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart1_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_1: spi@10900000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10900000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi1_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi2: usi@109100c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x109100c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x1004>;
+ status = "disabled";
+
+ hsi2c_2: i2c@10910000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10910000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c2_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_2: serial@10910000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10910000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart2_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_2: spi@10910000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10910000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi2_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi3: usi@109200c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x109200c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x1008>;
+ status = "disabled";
+
+ hsi2c_3: i2c@10920000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10920000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c3_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_3: serial@10920000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10920000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart3_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_3: spi@10920000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10920000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi3_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi4: usi@109300c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x109300c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x100c>;
+ status = "disabled";
+
+ hsi2c_4: i2c@10930000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10930000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c4_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_4: serial@10930000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10930000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart4_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_4: spi@10930000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10930000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi4_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi5: usi@109400c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x109400c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x1010>;
+ status = "disabled";
+
+ hsi2c_5: i2c@10940000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10940000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c5_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_5: serial@10940000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10940000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart5_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_5: spi@10940000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10940000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi5_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi6: usi@109500c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x109500c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x1014>;
+ status = "disabled";
+
+ hsi2c_6: i2c@10950000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10950000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c6_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_6: serial@10950000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10950000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart6_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_6: spi@10950000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10950000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi6_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi7: usi@109600c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x109600c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x1018>;
+ status = "disabled";
+
+ hsi2c_7: i2c@10960000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10960000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c7_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_7: serial@10960000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10960000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart7_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_7: spi@10960000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10960000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi7_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
usi8: usi@109700c0 {
- compatible = "google,gs101-usi",
- "samsung,exynos850-usi";
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
reg = <0x109700c0 0x20>;
ranges;
#address-cells = <1>;
@@ -393,18 +779,44 @@
interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hsi2c8_bus>;
clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
<&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>;
clock-names = "hsi2c", "hsi2c_pclk";
+ pinctrl-0 = <&hsi2c8_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_8: serial@10970000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10970000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart8_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_8: spi@10970000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10970000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi8_bus>;
+ pinctrl-names = "default";
status = "disabled";
};
};
usi_uart: usi@10a000c0 {
- compatible = "google,gs101-usi",
- "samsung,exynos850-usi";
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
reg = <0x10a000c0 0x20>;
ranges;
#address-cells = <1>;
@@ -419,16 +831,72 @@
serial_0: serial@10a00000 {
compatible = "google,gs101-uart";
reg = <0x10a00000 0xc0>;
- interrupts = <GIC_SPI 634
- IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
<&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
clock-names = "uart", "clk_uart_baud0";
+ pinctrl-0 = <&uart0_bus>;
+ pinctrl-names = "default";
samsung,uart-fifosize = <256>;
status = "disabled";
};
};
+ usi14: usi@10a200c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x10a200c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x1028>;
+ status = "disabled";
+
+ hsi2c_14: i2c@10a20000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10a20000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c14_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_14: serial@10a20000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10a20000 0xc0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart14_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_14: spi@10a20000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10a20000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi14_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
cmu_peric1: clock-controller@10c00000 {
compatible = "google,gs101-cmu-peric1";
reg = <0x10c00000 0x4000>;
@@ -448,12 +916,233 @@
pinctrl_peric1: pinctrl@10c40000 {
compatible = "google,gs101-pinctrl";
reg = <0x10c40000 0x00001000>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK>;
+ clock-names = "pclk";
interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
};
+ usi0: usi@10d100c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x10d100c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric1 0x1000>;
+ status = "disabled";
+
+ hsi2c_0: i2c@10d10000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10d10000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c0_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_usi0: serial@10d10000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10d10000 0xc0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart0_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_0: spi@10d10000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10d10000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi0_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi9: usi@10d200c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x10d200c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric1 0x1004>;
+ status = "disabled";
+
+ hsi2c_9: i2c@10d20000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10d20000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c9_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_9: serial@10d20000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10d20000 0xc0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart9_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_9: spi@10d20000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10d20000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi9_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi10: usi@10d300c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x10d300c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric1 0x1008>;
+ status = "disabled";
+
+ hsi2c_10: i2c@10d30000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10d30000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c10_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_10: serial@10d30000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10d30000 0xc0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart10_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_10: spi@10d30000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10d30000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi10_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi11: usi@10d400c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x10d400c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric1 0x100c>;
+ status = "disabled";
+
+ hsi2c_11: i2c@10d40000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10d40000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c11_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_11: serial@10d40000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10d40000 0xc0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart11_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_11: spi@10d40000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10d40000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi11_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
usi12: usi@10d500c0 {
- compatible = "google,gs101-usi",
- "samsung,exynos850-usi";
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
reg = <0x10d500c0 0x20>;
ranges;
#address-cells = <1>;
@@ -471,11 +1160,148 @@
interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-0 = <&hsi2c12_bus>;
- pinctrl-names = "default";
clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>,
<&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>;
clock-names = "hsi2c", "hsi2c_pclk";
+ pinctrl-0 = <&hsi2c12_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_12: serial@10d50000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10d50000 0xc0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart12_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_12: spi@10d50000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10d50000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi12_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi13: usi@10d600c0 {
+ compatible = "google,gs101-usi", "samsung,exynos850-usi";
+ reg = <0x10d600c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric1 0x1014>;
+ status = "disabled";
+
+ hsi2c_13: i2c@10d60000 {
+ compatible = "google,gs101-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10d60000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c13_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_13: serial@10d60000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10d60000 0xc0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart13_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+
+ spi_13: spi@10d60000 {
+ compatible = "google,gs101-spi";
+ reg = <0x10d60000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+ clock-names = "spi", "spi_busclk0";
+ interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&spi13_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ cmu_hsi0: clock-controller@11000000 {
+ compatible = "google,gs101-cmu-hsi0";
+ reg = <0x11000000 0x4000>;
+ #clock-cells = <1>;
+
+ clocks = <&ext_24_5m>,
+ <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+ <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+ <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+ <&cmu_top CLK_DOUT_CMU_HSI0_USBDPDBG>;
+ clock-names = "oscclk", "bus", "dpgtc", "usb31drd",
+ "usbdpdbg";
+ };
+
+ usbdrd31_phy: phy@11100000 {
+ compatible = "google,gs101-usb31drd-phy";
+ reg = <0x11100000 0x0100>,
+ <0x110f0000 0x0800>,
+ <0x110e0000 0x2800>;
+ reg-names = "phy", "pcs", "pma";
+ clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;
+ clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ usbdrd31: usb@11110000 {
+ compatible = "google,gs101-dwusb3";
+ clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK>;
+ clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x11110000 0x10000>;
+ status = "disabled";
+
+ usbdrd31_dwc3: usb@0 {
+ compatible = "snps,dwc3";
+ clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;
+ clock-names = "ref";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
status = "disabled";
};
};
@@ -483,15 +1309,74 @@
pinctrl_hsi1: pinctrl@11840000 {
compatible = "google,gs101-pinctrl";
reg = <0x11840000 0x00001000>;
+ /* TODO: update once support for this CMU exists */
+ clocks = <0>;
+ clock-names = "pclk";
interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
};
+ cmu_hsi2: clock-controller@14400000 {
+ compatible = "google,gs101-cmu-hsi2";
+ reg = <0x14400000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&ext_24_5m>,
+ <&cmu_top CLK_DOUT_CMU_HSI2_BUS>,
+ <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>,
+ <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>,
+ <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>;
+ clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
+ };
+
+ sysreg_hsi2: syscon@14420000 {
+ compatible = "google,gs101-hsi2-sysreg", "syscon";
+ reg = <0x14420000 0x10000>;
+ clocks = <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+ };
+
pinctrl_hsi2: pinctrl@14440000 {
compatible = "google,gs101-pinctrl";
reg = <0x14440000 0x00001000>;
+ clocks = <&cmu_hsi2 CLK_GOUT_HSI2_GPIO_HSI2_PCLK>;
+ clock-names = "pclk";
interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
};
+ ufs_0: ufs@14700000 {
+ compatible = "google,gs101-ufs";
+ reg = <0x14700000 0x200>,
+ <0x14701100 0x200>,
+ <0x14780000 0xa000>,
+ <0x14600000 0x100>;
+ reg-names = "hci", "vs_hci", "unipro", "ufsp";
+ interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>,
+ <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>,
+ <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>,
+ <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>,
+ <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>,
+ <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+ clock-names = "core_clk", "sclk_unipro_main", "fmp",
+ "aclk", "pclk", "sysreg";
+ freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;
+ pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+ pinctrl-names = "default";
+ phys = <&ufs_0_phy>;
+ phy-names = "ufs-phy";
+ samsung,sysreg = <&sysreg_hsi2 0x710>;
+ status = "disabled";
+ };
+
+ ufs_0_phy: phy@14704000 {
+ compatible = "google,gs101-ufs-phy";
+ reg = <0x14704000 0x3000>;
+ reg-names = "phy-pma";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <0>;
+ clocks = <&ext_24_5m>;
+ clock-names = "ref_clk";
+ status = "disabled";
+ };
+
cmu_apm: clock-controller@17400000 {
compatible = "google,gs101-cmu-apm";
reg = <0x17400000 0x8000>;
@@ -514,6 +1399,8 @@
pinctrl_gpio_alive: pinctrl@174d0000 {
compatible = "google,gs101-pinctrl";
reg = <0x174d0000 0x00001000>;
+ clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_ALIVE_PCLK>;
+ clock-names = "pclk";
wakeup-interrupt-controller {
compatible = "google,gs101-wakeup-eint",
@@ -525,6 +1412,8 @@
pinctrl_far_alive: pinctrl@174e0000 {
compatible = "google,gs101-pinctrl";
reg = <0x174e0000 0x00001000>;
+ clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_FAR_ALIVE_PCLK>;
+ clock-names = "pclk";
wakeup-interrupt-controller {
compatible = "google,gs101-wakeup-eint",
@@ -536,11 +1425,17 @@
pinctrl_gsactrl: pinctrl@17940000 {
compatible = "google,gs101-pinctrl";
reg = <0x17940000 0x00001000>;
+ /* TODO: update once support for this CMU exists */
+ clocks = <0>;
+ clock-names = "pclk";
};
pinctrl_gsacore: pinctrl@17a80000 {
compatible = "google,gs101-pinctrl";
reg = <0x17a80000 0x00001000>;
+ /* TODO: update once support for this CMU exists */
+ clocks = <0>;
+ clock-names = "pclk";
};
cmu_top: clock-controller@1e080000 {
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi
index fe9093b..a0f7bbd 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi
@@ -81,7 +81,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index ed4e69e..195bdba 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -10,7 +10,7 @@
/dts-v1/;
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
-#include "fsl-ls1028a-kontron-sl28.dts"
+#include "fsl-ls1028a-kontron-sl28-var3.dts"
/ {
model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3.dts b/dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3.dts
new file mode 100644
index 0000000..08851ca
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1028a-kontron-sl28-var3.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 3 which has one ethernet ports.
+ *
+ * Copyright (C) 2024 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+ model = "Kontron SMARC-sAL28 (Single PHY)";
+ compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a";
+};
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi
index ae534c2..70b8731 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi
@@ -1099,21 +1099,25 @@
0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000
/* BAR4 (PF5) - non-prefetchable memory */
0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
enetc_port0: ethernet@0,0 {
- compatible = "fsl,enetc";
+ compatible = "pci1957,e100", "fsl,enetc";
reg = <0x000000 0 0 0 0>;
status = "disabled";
};
enetc_port1: ethernet@0,1 {
- compatible = "fsl,enetc";
+ compatible = "pci1957,e100", "fsl,enetc";
reg = <0x000100 0 0 0 0>;
status = "disabled";
};
enetc_port2: ethernet@0,2 {
- compatible = "fsl,enetc";
+ compatible = "pci1957,e100", "fsl,enetc";
reg = <0x000200 0 0 0 0>;
phy-mode = "internal";
status = "disabled";
@@ -1126,14 +1130,14 @@
};
enetc_mdio_pf3: mdio@0,3 {
- compatible = "fsl,enetc-mdio";
+ compatible = "pci1957,ee01", "fsl,enetc-mdio";
reg = <0x000300 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
};
ethernet@0,4 {
- compatible = "fsl,enetc-ptp";
+ compatible = "pci1957,ee02", "fsl,enetc-ptp";
reg = <0x000400 0 0 0 0>;
clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
little-endian;
@@ -1143,7 +1147,7 @@
mscc_felix: ethernet-switch@0,5 {
reg = <0x000500 0 0 0 0>;
/* IEP INT_B */
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <2>;
status = "disabled";
mscc_felix_ports: ports {
@@ -1201,7 +1205,7 @@
};
enetc_port3: ethernet@0,6 {
- compatible = "fsl,enetc";
+ compatible = "pci1957,e100", "fsl,enetc";
reg = <0x000600 0 0 0 0>;
phy-mode = "internal";
status = "disabled";
@@ -1216,7 +1220,7 @@
rcec@1f,0 {
reg = <0x00f800 0 0 0 0>;
/* IEP INT_A */
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <1>;
};
};
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi
index d333b77..8ee6d8c 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi
@@ -276,7 +276,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <0 106 0x4>,
<0 107 0x4>,
<0 95 0x4>,
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi
index 1aa38ed..8352197 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi
@@ -12,6 +12,13 @@
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls208xa.dtsi"
+/ {
+ pmu {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+ };
+};
+
&cpu {
cpu0: cpu@0 {
device_type = "cpu";
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi
index 8581ea5..245bbd6 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi
@@ -12,6 +12,13 @@
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls208xa.dtsi"
+/ {
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
+ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+ };
+};
+
&cpu {
cpu0: cpu@0 {
device_type = "cpu";
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi
index 0b72928..ccba0a1 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi
@@ -247,11 +247,6 @@
<1 10 4>; /* Hypervisor PPI, active-low */
};
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
- };
-
psci {
compatible = "arm,psci-0.2";
method = "smc";
diff --git a/dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi
index e665c62..9605559 100644
--- a/dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi
@@ -748,7 +748,10 @@
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
- scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c0_scl>;
+ pinctrl-1 = <&i2c0_scl_gpio>;
+ scl-gpios = <&gpio0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -761,6 +764,10 @@
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c1_scl>;
+ pinctrl-1 = <&i2c1_scl_gpio>;
+ scl-gpios = <&gpio0 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -773,6 +780,10 @@
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c2_scl>;
+ pinctrl-1 = <&i2c2_scl_gpio>;
+ scl-gpios = <&gpio0 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -785,6 +796,10 @@
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c3_scl>;
+ pinctrl-1 = <&i2c3_scl_gpio>;
+ scl-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -797,7 +812,10 @@
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
- scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c4_scl>;
+ pinctrl-1 = <&i2c4_scl_gpio>;
+ scl-gpios = <&gpio0 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -810,6 +828,10 @@
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c5_scl>;
+ pinctrl-1 = <&i2c5_scl_gpio>;
+ scl-gpios = <&gpio0 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -822,6 +844,10 @@
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c6_scl>;
+ pinctrl-1 = <&i2c6_scl_gpio>;
+ scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -834,6 +860,10 @@
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c7_scl>;
+ pinctrl-1 = <&i2c7_scl_gpio>;
+ scl-gpios = <&gpio1 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -1669,6 +1699,80 @@
};
};
+ pinmux_i2crv: pinmux@70010012c {
+ compatible = "pinctrl-single";
+ reg = <0x00000007 0x0010012c 0x0 0xc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7>;
+
+ i2c1_scl: i2c1-scl-pins {
+ pinctrl-single,bits = <0x0 0 0x7>;
+ };
+
+ i2c1_scl_gpio: i2c1-scl-gpio-pins {
+ pinctrl-single,bits = <0x0 0x1 0x7>;
+ };
+
+ i2c2_scl: i2c2-scl-pins {
+ pinctrl-single,bits = <0x0 0 (0x7 << 3)>;
+ };
+
+ i2c2_scl_gpio: i2c2-scl-gpio-pins {
+ pinctrl-single,bits = <0x0 (0x1 << 3) (0x7 << 3)>;
+ };
+
+ i2c3_scl: i2c3-scl-pins {
+ pinctrl-single,bits = <0x0 0 (0x7 << 6)>;
+ };
+
+ i2c3_scl_gpio: i2c3-scl-gpio-pins {
+ pinctrl-single,bits = <0x0 (0x1 << 6) (0x7 << 6)>;
+ };
+
+ i2c4_scl: i2c4-scl-pins {
+ pinctrl-single,bits = <0x0 0 (0x7 << 9)>;
+ };
+
+ i2c4_scl_gpio: i2c4-scl-gpio-pins {
+ pinctrl-single,bits = <0x0 (0x1 << 9) (0x7 << 9)>;
+ };
+
+ i2c5_scl: i2c5-scl-pins {
+ pinctrl-single,bits = <0x0 0 (0x7 << 12)>;
+ };
+
+ i2c5_scl_gpio: i2c5-scl-gpio-pins {
+ pinctrl-single,bits = <0x0 (0x1 << 12) (0x7 << 12)>;
+ };
+
+ i2c6_scl: i2c6-scl-pins {
+ pinctrl-single,bits = <0x4 0x2 0x7>;
+ };
+
+ i2c6_scl_gpio: i2c6-scl-gpio-pins {
+ pinctrl-single,bits = <0x4 0x1 0x7>;
+ };
+
+ i2c7_scl: i2c7-scl-pins {
+ pinctrl-single,bits = <0x4 0x2 0x7>;
+ };
+
+ i2c7_scl_gpio: i2c7-scl-gpio-pins {
+ pinctrl-single,bits = <0x4 0x1 0x7>;
+ };
+
+ i2c0_scl: i2c0-scl-pins {
+ pinctrl-single,bits = <0x8 0 (0x7 << 10)>;
+ };
+
+ i2c0_scl_gpio: i2c0-scl-gpio-pins {
+ pinctrl-single,bits = <0x8 (0x1 << 10) (0x7 << 10)>;
+ };
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>,
diff --git a/dts/upstream/src/arm64/freescale/fsl-lx2162a-clearfog.dts b/dts/upstream/src/arm64/freescale/fsl-lx2162a-clearfog.dts
index 9f88583..eafef87 100644
--- a/dts/upstream/src/arm64/freescale/fsl-lx2162a-clearfog.dts
+++ b/dts/upstream/src/arm64/freescale/fsl-lx2162a-clearfog.dts
@@ -25,6 +25,7 @@
i2c7 = &mpcie1_i2c;
i2c8 = &mpcie0_i2c;
i2c9 = &pcieclk_i2c;
+ i2c10 = &i2c5;
mmc0 = &esdhc0;
mmc1 = &esdhc1;
serial0 = &uart0;
diff --git a/dts/upstream/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi b/dts/upstream/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi
index 0580ea3..e914291 100644
--- a/dts/upstream/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-lx2162a-sr-som.dtsi
@@ -71,3 +71,12 @@
reg = <0x54>;
};
};
+
+&i2c5 {
+ status = "okay";
+
+ rtc@6f {
+ compatible = "microchip,mcp7940x";
+ reg = <0x6f>;
+ };
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi b/dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi
index 07afeb7..897cbb7 100644
--- a/dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/imx8-clock.h>
#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
#include <dt-bindings/firmware/imx/rsrc.h>
audio_ipg_clk: clock-audio-ipg {
@@ -119,13 +120,96 @@ audio_subsys: bus@59000000 {
#size-cells = <1>;
ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+ asrc0: asrc@59000000 {
+ compatible = "fsl,imx8qm-asrc";
+ reg = <0x59000000 0x10000>;
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+ <&asrc0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div0_lpcg IMX_LPCG_CLK_4>,
+ <&aud_pll_div1_lpcg IMX_LPCG_CLK_4>,
+ <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+ <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "mem", "ipg",
+ "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+ "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+ "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+ "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+ "spba";
+ dmas = <&edma0 0 0 0>,
+ <&edma0 1 0 0>,
+ <&edma0 2 0 0>,
+ <&edma0 3 0 FSL_EDMA_RX>,
+ <&edma0 4 0 FSL_EDMA_RX>,
+ <&edma0 5 0 FSL_EDMA_RX>;
+ /* tx* is output channel of asrc, it is rx channel for eDMA */
+ dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+ fsl,asrc-rate = <8000>;
+ fsl,asrc-width = <16>;
+ fsl,asrc-clk-map = <0>;
+ power-domains = <&pd IMX_SC_R_ASRC_0>;
+ status = "disabled";
+ };
+
+ esai0: esai@59010000 {
+ compatible = "fsl,imx8qm-esai";
+ reg = <0x59010000 0x10000>;
+ interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&esai0_lpcg IMX_LPCG_CLK_4>,
+ <&esai0_lpcg IMX_LPCG_CLK_0>,
+ <&esai0_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>;
+ clock-names = "core", "extal", "fsys", "spba";
+ dmas = <&edma0 6 0 FSL_EDMA_RX>, <&edma0 7 0 0>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd IMX_SC_R_ESAI_0>;
+ status = "disabled";
+ };
+
+ spdif0: spdif@59020000 {
+ compatible = "fsl,imx8qm-spdif";
+ reg = <0x59020000 0x10000>;
+ interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, /* rx */
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; /* tx */
+ clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>, /* core */
+ <&clk_dummy>, /* rxtx0 */
+ <&spdif0_lpcg IMX_LPCG_CLK_0>, /* rxtx1 */
+ <&clk_dummy>, /* rxtx2 */
+ <&clk_dummy>, /* rxtx3 */
+ <&clk_dummy>, /* rxtx4 */
+ <&audio_ipg_clk>, /* rxtx5 */
+ <&clk_dummy>, /* rxtx6 */
+ <&clk_dummy>, /* rxtx7 */
+ <&clk_dummy>; /* spba */
+ clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6", "rxtx7", "spba";
+ dmas = <&edma0 8 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
+ <&edma0 9 0 FSL_EDMA_MULTI_FIFO>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd IMX_SC_R_SPDIF_0>;
+ status = "disabled";
+ };
+
sai0: sai@59040000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59040000 0x10000>;
interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sai0_lpcg 1>,
+ clocks = <&sai0_lpcg IMX_LPCG_CLK_4>,
<&clk_dummy>,
- <&sai0_lpcg 0>,
+ <&sai0_lpcg IMX_LPCG_CLK_0>,
<&clk_dummy>,
<&clk_dummy>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -139,9 +223,9 @@ audio_subsys: bus@59000000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59050000 0x10000>;
interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sai1_lpcg 1>,
+ clocks = <&sai1_lpcg IMX_LPCG_CLK_4>,
<&clk_dummy>,
- <&sai1_lpcg 0>,
+ <&sai1_lpcg IMX_LPCG_CLK_0>,
<&clk_dummy>,
<&clk_dummy>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -155,9 +239,9 @@ audio_subsys: bus@59000000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59060000 0x10000>;
interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sai2_lpcg 1>,
+ clocks = <&sai2_lpcg IMX_LPCG_CLK_4>,
<&clk_dummy>,
- <&sai2_lpcg 0>,
+ <&sai2_lpcg IMX_LPCG_CLK_0>,
<&clk_dummy>,
<&clk_dummy>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -171,9 +255,9 @@ audio_subsys: bus@59000000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59070000 0x10000>;
interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sai3_lpcg 1>,
+ clocks = <&sai3_lpcg IMX_LPCG_CLK_4>,
<&clk_dummy>,
- <&sai3_lpcg 0>,
+ <&sai3_lpcg IMX_LPCG_CLK_0>,
<&clk_dummy>,
<&clk_dummy>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -239,6 +323,40 @@ audio_subsys: bus@59000000 {
<&pd IMX_SC_R_DMA_0_CH23>;
};
+ asrc0_lpcg: clock-controller@59400000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59400000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "asrc0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ASRC_0>;
+ };
+
+ esai0_lpcg: clock-controller@59410000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59410000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "esai0_lpcg_extal_clk",
+ "esai0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ESAI_0>;
+ };
+
+ spdif0_lpcg: clock-controller@59420000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59420000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SPDIF0_TX_CLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "spdif0_lpcg_tx_clk",
+ "spdif0_lpcg_gclkw";
+ power-domains = <&pd IMX_SC_R_SPDIF_0>;
+ };
+
sai0_lpcg: clock-controller@59440000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x59440000 0x10000>;
@@ -333,6 +451,101 @@ audio_subsys: bus@59000000 {
status = "disabled";
};
+ asrc1: asrc@59800000 {
+ compatible = "fsl,imx8qm-asrc";
+ reg = <0x59800000 0x10000>;
+ interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&asrc1_lpcg IMX_LPCG_CLK_4>,
+ <&asrc1_lpcg IMX_LPCG_CLK_4>,
+ <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+ <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+ <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "mem", "ipg",
+ "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+ "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+ "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+ "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+ "spba";
+ dmas = <&edma1 0 0 0>,
+ <&edma1 1 0 0>,
+ <&edma1 2 0 0>,
+ <&edma1 3 0 FSL_EDMA_RX>,
+ <&edma1 4 0 FSL_EDMA_RX>,
+ <&edma1 5 0 FSL_EDMA_RX>;
+ /* tx* is output channel of asrc, it is rx channel for eDMA */
+ dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+ fsl,asrc-rate = <8000>;
+ fsl,asrc-width = <16>;
+ fsl,asrc-clk-map = <1>;
+ power-domains = <&pd IMX_SC_R_ASRC_1>;
+ status = "disabled";
+ };
+
+ sai4: sai@59820000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59820000 0x10000>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai4_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&sai4_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 8 0 FSL_EDMA_RX>, <&edma1 9 0 0>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd IMX_SC_R_SAI_4>;
+ status = "disabled";
+ };
+
+ sai5: sai@59830000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59830000 0x10000>;
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai5_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&sai5_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 10 0 0>;
+ dma-names = "tx";
+ power-domains = <&pd IMX_SC_R_SAI_5>;
+ status = "disabled";
+ };
+
+ amix: amix@59840000 {
+ compatible = "fsl,imx8qm-audmix";
+ reg = <0x59840000 0x10000>;
+ clocks = <&amix_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_AMIX>;
+ dais = <&sai4>, <&sai5>;
+ status = "disabled";
+ };
+
+ mqs: mqs@59850000 {
+ compatible = "fsl,imx8qm-mqs";
+ reg = <0x59850000 0x10000>;
+ clocks = <&mqs0_lpcg IMX_LPCG_CLK_4>, <&mqs0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk", "core";
+ power-domains = <&pd IMX_SC_R_MQS_0>;
+ status = "disabled";
+ };
+
edma1: dma-controller@599f0000 {
compatible = "fsl,imx8qm-edma";
reg = <0x599f0000 0xc0000>;
@@ -481,4 +694,60 @@ audio_subsys: bus@59000000 {
"sai3_rx_bclk",
"sai4_rx_bclk";
};
+
+ asrc1_lpcg: clock-controller@59c00000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c00000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "asrc1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ASRC_1>;
+ };
+
+ sai4_lpcg: clock-controller@59c20000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c20000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "sai4_lpcg_mclk",
+ "sai4_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_4>;
+ };
+
+ sai5_lpcg: clock-controller@59c30000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c30000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "sai5_lpcg_mclk",
+ "sai5_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_5>;
+ };
+
+ amix_lpcg: clock-controller@59c40000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c40000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "amix_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_AMIX>;
+ };
+
+ mqs0_lpcg: clock-controller@59c50000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c50000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_MQS_TX_CLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "mqs0_lpcg_mclk",
+ "mqs0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MQS_0>;
+ };
};
diff --git a/dts/upstream/src/arm64/freescale/imx8-ss-cm40.dtsi b/dts/upstream/src/arm64/freescale/imx8-ss-cm40.dtsi
new file mode 100644
index 0000000..92752c0
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8-ss-cm40.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+cm40_ipg_clk: clock-cm40-ipg {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <132000000>;
+ clock-output-names = "cm40_ipg_clk";
+};
+
+cm40_subsys: bus@34000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x34000000 0x0 0x34000000 0x4000000>;
+ interrupt-parent = <&cm40_intmux>;
+
+ cm40_lpuart: serial@37220000 {
+ compatible = "fsl,imx8qxp-lpuart";
+ reg = <0x37220000 0x1000>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cm40_uart_lpcg IMX_LPCG_CLK_1>, <&cm40_uart_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_M4_0_UART>;
+ status = "disabled";
+ };
+
+ cm40_i2c: i2c@37230000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x37230000 0x1000>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cm40_i2c_lpcg IMX_LPCG_CLK_0>,
+ <&cm40_i2c_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_M4_0_I2C>;
+ status = "disabled";
+ };
+
+ cm40_intmux: intmux@37400000 {
+ compatible = "fsl,imx-intmux";
+ reg = <0x37400000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&cm40_ipg_clk>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_M4_0_INTMUX>;
+ status = "disabled";
+ };
+
+ cm40_uart_lpcg: clock-controller@37620000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x37620000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>,
+ <&cm40_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>;
+ clock-output-names = "cm40_lpcg_uart_clk",
+ "cm40_lpcg_uart_ipg_clk";
+ power-domains = <&pd IMX_SC_R_M4_0_UART>;
+ };
+
+ cm40_i2c_lpcg: clock-controller@37630000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x37630000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>,
+ <&cm40_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "cm40_lpcg_i2c_clk",
+ "cm40_lpcg_i2c_ipg_clk";
+ power-domains = <&pd IMX_SC_R_M4_0_I2C>;
+ };
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8-ss-img.dtsi b/dts/upstream/src/arm64/freescale/imx8-ss-img.dtsi
index e7783cc..77d2928 100644
--- a/dts/upstream/src/arm64/freescale/imx8-ss-img.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8-ss-img.dtsi
@@ -21,7 +21,6 @@ img_subsys: bus@58000000 {
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
<&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
- clock-names = "per", "ipg";
assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
<&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
assigned-clock-rates = <200000000>, <200000000>;
@@ -35,7 +34,6 @@ img_subsys: bus@58000000 {
interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
<&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
- clock-names = "per", "ipg";
assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
<&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
assigned-clock-rates = <200000000>, <200000000>;
diff --git a/dts/upstream/src/arm64/freescale/imx8dx-colibri-aster.dts b/dts/upstream/src/arm64/freescale/imx8dx-colibri-aster.dts
new file mode 100644
index 0000000..c974f5d
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8dx-colibri-aster.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-aster.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX8DX on Aster Board";
+ compatible = "toradex,colibri-imx8x-aster",
+ "toradex,colibri-imx8x",
+ "fsl,imx8dx";
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8dx-colibri-eval-v3.dts b/dts/upstream/src/arm64/freescale/imx8dx-colibri-eval-v3.dts
new file mode 100644
index 0000000..f2bf154
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8dx-colibri-eval-v3.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX8DX on Colibri Evaluation Board V3";
+ compatible = "toradex,colibri-imx8x-eval-v3",
+ "toradex,colibri-imx8x",
+ "fsl,imx8dx";
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8dx-colibri-iris-v2.dts b/dts/upstream/src/arm64/freescale/imx8dx-colibri-iris-v2.dts
new file mode 100644
index 0000000..fd425c7
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8dx-colibri-iris-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-iris-v2.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX8DX on Colibri Iris V2 Board";
+ compatible = "toradex,colibri-imx8x-iris-v2",
+ "toradex,colibri-imx8x",
+ "fsl,imx8dx";
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8dx-colibri-iris.dts b/dts/upstream/src/arm64/freescale/imx8dx-colibri-iris.dts
new file mode 100644
index 0000000..e5e2346
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8dx-colibri-iris.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX8DX on Colibri Iris Board";
+ compatible = "toradex,colibri-imx8x-iris",
+ "toradex,colibri-imx8x",
+ "fsl,imx8dx";
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8dx-colibri.dtsi b/dts/upstream/src/arm64/freescale/imx8dx-colibri.dtsi
new file mode 100644
index 0000000..66b0fcc
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8dx-colibri.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+#include "imx8dx.dtsi"
+#include "imx8x-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX8DX Module";
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8dx.dtsi b/dts/upstream/src/arm64/freescale/imx8dx.dtsi
new file mode 100644
index 0000000..ce76efc
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8dx.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxp.dtsi"
+
+&gpu_3d0 {
+ assigned-clock-rates = <372000000>, <372000000>;
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8dxl-evk.dts b/dts/upstream/src/arm64/freescale/imx8dxl-evk.dts
index 2123d43..2412ab1 100644
--- a/dts/upstream/src/arm64/freescale/imx8dxl-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx8dxl-evk.dts
@@ -16,6 +16,8 @@
mmc0 = &usdhc1;
mmc1 = &usdhc2;
serial0 = &lpuart0;
+ serial1 = &lpuart1;
+ serial6 = &cm40_lpuart;
};
chosen {
@@ -51,6 +53,16 @@
};
};
+ m2_uart1_sel: regulator-m2uart1sel {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "m2_uart1_sel";
+ gpio = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
mux3_en: regulator-0 {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
@@ -340,6 +352,12 @@
status = "okay";
};
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart1>;
+ status = "okay";
+};
+
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
@@ -354,6 +372,16 @@
status = "okay";
};
+&cm40_intmux {
+ status = "disabled";
+};
+
+&cm40_lpuart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cm40_lpuart>;
+ status = "disabled";
+};
+
&lsio_gpio4 {
status = "okay";
};
@@ -595,6 +623,15 @@
>;
};
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins = <
+ IMX8DXL_UART1_TX_ADMA_UART1_TX 0x06000020
+ IMX8DXL_UART1_RX_ADMA_UART1_RX 0x06000020
+ IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B 0x06000020
+ IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B 0x06000020
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
diff --git a/dts/upstream/src/arm64/freescale/imx8dxl.dtsi b/dts/upstream/src/arm64/freescale/imx8dxl.dtsi
index a0674c5..7e54cf2 100644
--- a/dts/upstream/src/arm64/freescale/imx8dxl.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8dxl.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/clock/imx8-clock.h>
#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
#include <dt-bindings/firmware/imx/rsrc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -104,7 +105,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -231,6 +232,7 @@
};
/* sorted in register address */
+ #include "imx8-ss-cm40.dtsi"
#include "imx8-ss-adma.dtsi"
#include "imx8-ss-conn.dtsi"
#include "imx8-ss-ddr.dtsi"
@@ -241,3 +243,14 @@
#include "imx8dxl-ss-conn.dtsi"
#include "imx8dxl-ss-lsio.dtsi"
#include "imx8dxl-ss-ddr.dtsi"
+
+&cm40_intmux {
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi
index bd5b365..90d1901 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi
@@ -72,6 +72,20 @@
enable-active-high;
};
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
reg_vddext_3v3: regulator-vddext-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDEXT_3V3";
@@ -381,7 +395,7 @@
};
ptn5110: tcpc@50 {
- compatible = "nxp,ptn5110";
+ compatible = "nxp,ptn5110", "tcpci";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec1>;
reg = <0x50>;
@@ -441,6 +455,9 @@
assigned-clock-rates = <24000000>;
powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ DOVDD-supply = <&buck5_reg>;
+ AVDD-supply = <&reg_1v8>;
+ DVDD-supply = <&reg_1v5>;
port {
ov5640_to_mipi_csi2: endpoint {
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-var-som-symphony.dts b/dts/upstream/src/arm64/freescale/imx8mm-var-som-symphony.dts
index d643381..affbc67 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-var-som-symphony.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mm-var-som-symphony.dts
@@ -117,7 +117,6 @@
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ptn5150>;
- status = "okay";
};
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
index 41c9661..429be2b 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
@@ -57,7 +57,7 @@
status = "okay";
tpm@1 {
- compatible = "tcg,tpm_tis-spi";
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts
index 5e2cbaf..35ae0fa 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts
@@ -297,7 +297,7 @@
};
tpm@1 {
- compatible = "tcg,tpm_tis-spi";
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi
index 1cff0b8..ce20de2 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-verdin-dahlia.dtsi
@@ -10,7 +10,7 @@
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "imx8mm-wm8904";
+ simple-audio-card,name = "verdin-wm8904";
simple-audio-card,routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
@@ -32,6 +32,25 @@
sound-dai = <&sai2>;
};
};
+
+ reg_usb_hub: regulator-usb-hub {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ regulator-name = "HUB_PWR_EN";
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ regulator-name = "PCIE_1_PWR_EN";
+ startup-delay-us = <100000>;
+ };
};
/* Verdin SPI_1 */
@@ -58,6 +77,11 @@
status = "okay";
};
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
/* Current measurement into module VCC */
&hwmon {
status = "okay";
@@ -93,6 +117,7 @@
/* Verdin PCIE_1 */
&pcie0 {
+ vpcie-supply = <&reg_pcie>;
status = "okay";
};
@@ -115,6 +140,11 @@
status = "okay";
};
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+ status = "disabled";
+};
+
/* Verdin I2S_1 */
&sai2 {
status = "okay";
@@ -143,8 +173,16 @@
/* Verdin USB_2 */
&usbotg2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
disable-over-current;
status = "okay";
+
+ usb-hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ vdd-supply = <&reg_usb_hub>;
+ };
};
/* Verdin SD_1 */
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-verdin-dev.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-verdin-dev.dtsi
index 3c4b8ca..1d8d146 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-verdin-dev.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-verdin-dev.dtsi
@@ -10,7 +10,7 @@
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "imx8mm-nau8822";
+ simple-audio-card,name = "verdin-nau8822";
simple-audio-card,routing =
"Headphones", "LHP",
"Headphones", "RHP",
@@ -78,6 +78,11 @@
status = "okay";
};
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
&gpio_expander_21 {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-verdin-yavia.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-verdin-yavia.dtsi
index 1e28c78..763f069 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-verdin-yavia.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-verdin-yavia.dtsi
@@ -81,6 +81,11 @@
pinctrl-0 = <&pinctrl_gpios_ext_yavia>;
};
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
&hwmon_temp {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi
index 6f08115..9854474 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <dt-bindings/pwm/pwm.h>
#include "imx8mm.dtsi"
+#include "imx8mm-overdrive.dtsi"
/ {
chosen {
@@ -110,6 +111,22 @@
startup-delay-us = <200000>;
};
+ /*
+ * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+ * peripherals on the carrier board powered.
+ * If more granularity or power saving is required this can be disabled
+ * in the carrier board device tree files.
+ */
+ reg_force_sleep_moci: regulator-force-sleep-moci {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "CTRL_SLEEP_MOCI#";
+ };
+
reg_usb_otg1_vbus: regulator-usb-otg1 {
compatible = "regulator-fixed";
enable-active-high;
@@ -333,16 +350,6 @@
"SODIMM_212",
"SODIMM_151",
"SODIMM_153";
-
- ctrl-sleep-moci-hog {
- gpio-hog;
- /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
- gpios = <1 GPIO_ACTIVE_HIGH>;
- line-name = "CTRL_SLEEP_MOCI#";
- output-high;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
- };
};
/* On-module I2C */
@@ -929,7 +936,7 @@
/* Verdin GPIO_9_DSI (pulled-up as active-low) */
pinctrl_gpio_9_dsi: gpio9dsigrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */
+ <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c6>; /* SODIMM 17 */
};
/* Verdin GPIO_10_DSI (pulled-up as active-low) */
diff --git a/dts/upstream/src/arm64/freescale/imx8mm.dtsi b/dts/upstream/src/arm64/freescale/imx8mm.dtsi
index 8a1b42b..9535ded 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm.dtsi
@@ -1168,6 +1168,13 @@
remote-endpoint = <&lcdif_to_dsim>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ mipi_dsi_out: endpoint {
+ };
+ };
};
};
@@ -1253,7 +1260,6 @@
reg = <0x32e40000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
- clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
phys = <&usbphynop1>;
@@ -1274,7 +1280,6 @@
reg = <0x32e50000 0x200>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
- clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
phys = <&usbphynop2>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mn-ddr3l-evk.dts b/dts/upstream/src/arm64/freescale/imx8mn-ddr3l-evk.dts
index 000e2c0..d25032e 100644
--- a/dts/upstream/src/arm64/freescale/imx8mn-ddr3l-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mn-ddr3l-evk.dts
@@ -112,3 +112,19 @@
};
};
};
+
+&i2c2 {
+ hdmi@3d {
+ avdd-supply = <&buck5>;
+ dvdd-supply = <&buck5>;
+ pvdd-supply = <&buck5>;
+ a2vdd-supply = <&buck5>;
+ v1p2-supply = <&buck5>;
+ };
+};
+
+&i2c3 {
+ camera@3c {
+ DOVDD-supply = <&buck5>;
+ };
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mn-ddr4-evk.dts b/dts/upstream/src/arm64/freescale/imx8mn-ddr4-evk.dts
index cc2ff59..6d85a0b 100644
--- a/dts/upstream/src/arm64/freescale/imx8mn-ddr4-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mn-ddr4-evk.dts
@@ -158,3 +158,19 @@
};
};
};
+
+&i2c2 {
+ hdmi@3d {
+ avdd-supply = <&buck5_reg>;
+ dvdd-supply = <&buck5_reg>;
+ pvdd-supply = <&buck5_reg>;
+ a2vdd-supply = <&buck5_reg>;
+ v1p2-supply = <&buck5_reg>;
+ };
+};
+
+&i2c3 {
+ camera@3c {
+ DOVDD-supply = <&buck5_reg>;
+ };
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mn-evk.dts b/dts/upstream/src/arm64/freescale/imx8mn-evk.dts
index 0b71f50..4133021 100644
--- a/dts/upstream/src/arm64/freescale/imx8mn-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mn-evk.dts
@@ -125,3 +125,19 @@
};
};
};
+
+&i2c2 {
+ hdmi@3d {
+ avdd-supply = <&buck5>;
+ dvdd-supply = <&buck5>;
+ pvdd-supply = <&buck5>;
+ a2vdd-supply = <&buck5>;
+ v1p2-supply = <&buck5>;
+ };
+};
+
+&i2c3 {
+ camera@3c {
+ DOVDD-supply = <&buck5>;
+ };
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mn-evk.dtsi b/dts/upstream/src/arm64/freescale/imx8mn-evk.dtsi
index 269e70f..9e0259d 100644
--- a/dts/upstream/src/arm64/freescale/imx8mn-evk.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mn-evk.dtsi
@@ -30,7 +30,7 @@
port {
hdmi_connector_in: endpoint {
- remote-endpoint = <&adv7533_out>;
+ remote-endpoint = <&adv7535_out>;
};
};
};
@@ -52,6 +52,27 @@
enable-active-high;
};
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vddext_3v3: regulator-vddext-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDEXT_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
@@ -193,15 +214,11 @@
hdmi@3d {
compatible = "adi,adv7535";
- reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
- reg-names = "main", "cec", "edid", "packet";
+ reg = <0x3d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
adi,dsi-lanes = <4>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
+ v3p3-supply = <&reg_vddext_3v3>;
ports {
#address-cells = <1>;
@@ -210,7 +227,7 @@
port@0 {
reg = <0>;
- adv7533_in: endpoint {
+ adv7535_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
@@ -218,7 +235,7 @@
port@1 {
reg = <1>;
- adv7533_out: endpoint {
+ adv7535_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
@@ -227,7 +244,7 @@
};
ptn5110: tcpc@50 {
- compatible = "nxp,ptn5110";
+ compatible = "nxp,ptn5110", "tcpci";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec1>;
reg = <0x50>;
@@ -284,6 +301,8 @@
assigned-clock-rates = <24000000>;
powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <&reg_1v8>;
+ DVDD-supply = <&reg_1v5>;
port {
ov5640_to_mipi_csi2: endpoint {
@@ -335,7 +354,7 @@
reg = <1>;
dsi_out: endpoint {
- remote-endpoint = <&adv7533_in>;
+ remote-endpoint = <&adv7535_in>;
data-lanes = <1 2 3 4>;
};
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mn-var-som-symphony.dts b/dts/upstream/src/arm64/freescale/imx8mn-var-som-symphony.dts
index a6b94d1..3434b18 100644
--- a/dts/upstream/src/arm64/freescale/imx8mn-var-som-symphony.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mn-var-som-symphony.dts
@@ -126,7 +126,6 @@
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ptn5150>;
- status = "okay";
port {
typec1_dr_sw: endpoint {
diff --git a/dts/upstream/src/arm64/freescale/imx8mn.dtsi b/dts/upstream/src/arm64/freescale/imx8mn.dtsi
index 932c8b0..a5f9cfb 100644
--- a/dts/upstream/src/arm64/freescale/imx8mn.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mn.dtsi
@@ -1104,6 +1104,13 @@
remote-endpoint = <&lcdif_to_dsim>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ mipi_dsi_out: endpoint {
+ };
+ };
};
};
@@ -1213,7 +1220,6 @@
reg = <0x32e40000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
- clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
phys = <&usbphynop1>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts b/dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts
index a080574..e5d3901 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts
@@ -340,7 +340,7 @@
&i2c3 {
/* Connected to USB Hub */
usb-typec@52 {
- compatible = "nxp,ptn5110";
+ compatible = "nxp,ptn5110", "tcpci";
reg = <0x52>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts b/dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts
index 2c19766..9b8f97a 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts
@@ -197,10 +197,8 @@
};
&i2c2 {
- clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
};
&i2c3 {
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts b/dts/upstream/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts
index b11d694..d241db3 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -144,7 +144,6 @@
pinctrl-0 = <&pinctrl_eqos>;
nvmem-cells = <&ethmac1>;
nvmem-cell-names = "mac-address";
- phy-supply = <&reg_baseboard_vdd3v3>;
phy-handle = <&ethphy0>;
phy-mode = "rgmii-id";
status = "okay";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts
index b749e28..ac7ec75 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts
@@ -167,6 +167,16 @@
VDDIO-supply = <&reg_vdd_3p3v_awo>;
};
+ csi2exp: gpio@24 {
+ compatible = "nxp,pca9570";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "CSI2_#RESET", "CSI2_#PWDN",
+ "CSI_#PWDN", "CSI_#RESET";
+ };
+
typec@3d {
compatible = "nxp,ptn5150";
reg = <0x3d>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi
index 43f1d45..f5115f9 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi
@@ -254,7 +254,7 @@
<&clk IMX8MP_CLK_CLKOUT2>,
<&clk IMX8MP_AUDIO_PLL2_OUT>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
- assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+ assigned-clock-rates = <13000000>, <13000000>, <208000000>;
reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
status = "disabled";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-evk.dts b/dts/upstream/src/arm64/freescale/imx8mp-evk.dts
index 9beba8d..8be5b2a 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-evk.dts
@@ -145,6 +145,27 @@
};
+ sound-hdmi {
+ compatible = "fsl,imx-audio-hdmi";
+ model = "audio-hdmi";
+ audio-cpu = <&aud2htx>;
+ hdmi-out;
+ };
+
+ sound-micfil {
+ compatible = "fsl,imx-audio-card";
+ model = "micfil-audio";
+
+ pri-dai-link {
+ link-name = "micfil hifi";
+ format = "i2s";
+
+ cpu {
+ sound-dai = <&micfil>;
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -198,6 +219,10 @@
cpu-supply = <&reg_arm>;
};
+&aud2htx {
+ status = "okay";
+};
+
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
@@ -524,6 +549,16 @@
status = "okay";
};
+&micfil {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdm>;
+ assigned-clocks = <&clk IMX8MP_CLK_PDM>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <196608000>;
+ status = "okay";
+};
+
&mipi_dsi {
samsung,esc-clock-frequency = <10000000>;
status = "okay";
@@ -790,6 +825,16 @@
>;
};
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK 0xd6
+ MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00 0xd6
+ MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01 0xd6
+ MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02 0xd6
+ MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03 0xd6
+ >;
+ };
+
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s.dtsi
index 61c2a63..0fd5c3a 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s.dtsi
@@ -200,8 +200,11 @@
};
&i2c1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <400000>;
status = "okay";
@@ -241,8 +244,11 @@
};
&i2c6 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c6>;
+ pinctrl-1 = <&pinctrl_i2c6_gpio>;
+ scl-gpios = <&gpio3 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <400000>;
status = "okay";
@@ -602,38 +608,50 @@
pinctrl_i2c1: i2c1grp {
fsl,pins =
- <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3>,
- <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3>;
+ <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001e0>,
+ <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001e0>;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e0>,
+ <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e0>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins =
- <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3>,
- <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3>;
+ <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e0>,
+ <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e0>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins =
- <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3>,
- <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3>;
+ <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001e0>,
+ <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001e0>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins =
- <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3>,
- <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3>;
+ <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001e0>,
+ <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001e0>;
};
pinctrl_i2c5: i2c5grp {
fsl,pins =
- <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3>,
- <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3>;
+ <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001e0>,
+ <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001e0>;
};
pinctrl_i2c6: i2c6grp {
fsl,pins =
- <MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3>,
- <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3>;
+ <MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001e0>,
+ <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001e0>;
+ };
+
+ pinctrl_i2c6_gpio: i2c6gpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x1e0>,
+ <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x1e0>;
};
pinctrl_lcd0_backlight: lcd0-backlightgrp {
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-navqp.dts b/dts/upstream/src/arm64/freescale/imx8mp-navqp.dts
new file mode 100644
index 0000000..5fd1614
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8mp-navqp.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Emcraft Systems
+ * Copyright 2024 Gilles Talis <gilles.talis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mp.dtsi"
+
+/ {
+ model = "Emcraft Systems i.MX8MPlus NavQ+ Kit";
+ compatible = "emcraft,imx8mp-navqp", "fsl,imx8mp";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ off-on-delay-us = <12000>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <10000>;
+ qca,disable-smarteee;
+ qca,disable-hibernation-mode;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ };
+};
+
+&uart2 {
+ /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* SD Card */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x110
+ >;
+ };
+
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 86d3da3..c51ed7d 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -135,6 +135,18 @@
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "X44";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
display: display {
/*
* Display is not fixed, so compatible has to be added from
@@ -470,6 +482,28 @@
"", "", "", "";
};
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
&i2c2 {
clock-frequency = <384000>;
pinctrl-names = "default", "gpio";
@@ -531,6 +565,10 @@
status = "okay";
};
+&lcdif3 {
+ status = "okay";
+};
+
&pcf85063 {
/* RTC_EVENT# is connected on MBa8MPxL */
pinctrl-names = "default";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
index e7bf032..2f740d7 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
@@ -68,7 +68,7 @@
status = "okay";
tpm@1 {
- compatible = "tcg,tpm_tis-spi";
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
index f24b147..5ab3ffe 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
@@ -8,6 +8,10 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
+ aliases {
+ ethernet1 = &eth1;
+ };
+
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
@@ -152,6 +156,38 @@
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@3,0 {
+ reg = <0x1800 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ eth1: ethernet@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+ };
};
/* GPS */
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
index f5491a6..e2b5e7a 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
@@ -8,6 +8,10 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
+ aliases {
+ ethernet1 = &eth1;
+ };
+
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
@@ -164,6 +168,38 @@
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@4,0 {
+ reg = <0x2000 0 0 0 0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ eth1: ethernet@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+ };
};
/* GPS */
@@ -183,7 +219,7 @@
bluetooth {
compatible = "brcm,bcm4330-bt";
- shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso
index 270a911..edf22ff 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso
+++ b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx-imx219.dtso
@@ -62,12 +62,25 @@
status = "okay";
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
+ reg = <0>;
+
mipi_csi_0_in: endpoint {
remote-endpoint = <&imx219_to_mipi_csi2>;
data-lanes = <1 2>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi_0_out: endpoint {
+ remote-endpoint = <&isi_in_0>;
+ };
+ };
};
};
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts
index cae586c..a77e9a4 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts
@@ -404,6 +404,12 @@
label = "vdd_dram";
};
+ channel@9e {
+ gw,mode = <2>;
+ reg = <0x9e>;
+ label = "vdd_1p0";
+ };
+
channel@a2 {
gw,mode = <2>;
reg = <0xa2>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
index 7e9e4b1..6e6b9c2 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
@@ -10,7 +10,7 @@
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&codec_dai>;
simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "imx8mp-wm8904";
+ simple-audio-card,name = "verdin-wm8904";
simple-audio-card,routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
@@ -32,6 +32,25 @@
sound-dai = <&sai1>;
};
};
+
+ reg_usb_hub: regulator-usb-hub {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ regulator-name = "HUB_PWR_EN";
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ regulator-name = "PCIE_1_PWR_EN";
+ startup-delay-us = <100000>;
+ };
};
&backlight {
@@ -70,6 +89,11 @@
status = "okay";
};
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
/* Current measurement into module VCC */
&hwmon {
status = "okay";
@@ -110,8 +134,14 @@
};
};
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+ status = "okay";
+};
+
/* Verdin PCIE_1 */
&pcie {
+ vpcie-supply = <&reg_pcie>;
status = "okay";
};
@@ -138,6 +168,11 @@
vin-supply = <&reg_3p3v>;
};
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+ status = "disabled";
+};
+
/* Verdin I2S_1 */
&sai1 {
assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
@@ -181,6 +216,25 @@
status = "okay";
};
+&usb_dwc3_1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_hub_3_0: usb-hub@1 {
+ compatible = "usb424,5744";
+ reg = <1>;
+ peer-hub = <&usb_hub_2_0>;
+ vdd-supply = <&reg_usb_hub>;
+ };
+
+ usb_hub_2_0: usb-hub@2 {
+ compatible = "usb424,2744";
+ reg = <2>;
+ peer-hub = <&usb_hub_3_0>;
+ vdd-supply = <&reg_usb_hub>;
+ };
+};
+
/* Verdin SD_1 */
&usdhc2 {
status = "okay";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi
index a509b2b..42ed44a 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi
@@ -22,7 +22,7 @@
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&codec_dai>;
simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "imx8mp-nau8822";
+ simple-audio-card,name = "verdin-nau8822";
simple-audio-card,routing =
"Headphones", "LHP",
"Headphones", "RHP",
@@ -93,6 +93,11 @@
status = "okay";
};
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
&gpio_expander_21 {
status = "okay";
vcc-supply = <&reg_1p8v>;
@@ -131,6 +136,11 @@
};
};
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+ status = "okay";
+};
+
/* Verdin PCIE_1 */
&pcie {
status = "okay";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
index 8482393..1d15f74 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
@@ -112,6 +112,11 @@
status = "okay";
};
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+ status = "okay";
+};
+
/* Verdin PCIE_1 */
&pcie {
status = "okay";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi
index db1722f..a7b261f 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi
@@ -100,6 +100,11 @@
status = "okay";
};
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
&hwmon_temp {
status = "okay";
};
@@ -117,6 +122,11 @@
status = "okay";
};
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+ status = "okay";
+};
+
/* Verdin PCIE_1 */
&pcie {
status = "okay";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi
index faa17cb..aef4bef 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi
@@ -116,6 +116,22 @@
vin-supply = <&reg_vdd_3v3>;
};
+ /*
+ * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+ * peripherals on the carrier board powered.
+ * If more granularity or power saving is required this can be disabled
+ * in the carrier board device tree files.
+ */
+ reg_force_sleep_moci: regulator-force-sleep-moci {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "CTRL_SLEEP_MOCI#";
+ };
+
reg_usb1_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
enable-active-high;
@@ -439,16 +455,6 @@
"SODIMM_256",
"SODIMM_48",
"SODIMM_44";
-
- ctrl-sleep-moci-hog {
- gpio-hog;
- /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
- gpios = <29 GPIO_ACTIVE_HIGH>;
- line-name = "CTRL_SLEEP_MOCI#";
- output-high;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
- };
};
/* On-module I2C */
@@ -664,8 +670,6 @@
};
};
-/* TODO: Verdin I2C_3_HDMI */
-
/* Verdin I2C_4_CSI */
&i2c3 {
clock-frequency = <400000>;
@@ -764,6 +768,16 @@
};
};
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c5>;
+ pinctrl-1 = <&pinctrl_i2c5_gpio>;
+ scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
/* Verdin PCIE_1 */
&pcie {
pinctrl-names = "default";
@@ -1106,8 +1120,6 @@
pinctrl_hdmi_hog: hdmihoggrp {
fsl,pins =
<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019>, /* SODIMM 63 */
- <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3>, /* SODIMM 59 */
- <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3>, /* SODIMM 57 */
<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019>; /* SODIMM 61 */
};
@@ -1163,6 +1175,19 @@
<MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001c6>; /* SODIMM 12 */
};
+ /* Verdin I2C_3_HDMI */
+ pinctrl_i2c5: i2c5grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x400001c6>, /* SODIMM 59 */
+ <MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x400001c6>; /* SODIMM 57 */
+ };
+
+ pinctrl_i2c5_gpio: i2c5gpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x400001c6>, /* SODIMM 59 */
+ <MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x400001c6>; /* SODIMM 57 */
+ };
+
/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
fsl,pins =
diff --git a/dts/upstream/src/arm64/freescale/imx8mp.dtsi b/dts/upstream/src/arm64/freescale/imx8mp.dtsi
index 8141926..b92abb5 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp.dtsi
@@ -836,6 +836,23 @@
<&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
};
+ pgc_hdmimix: power-domain@14 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>;
+ clocks = <&clk IMX8MP_CLK_HDMI_ROOT>,
+ <&clk IMX8MP_CLK_HDMI_APB>;
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+ <&clk IMX8MP_CLK_HDMI_APB>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+ <&clk IMX8MP_SYS_PLL1_133M>;
+ assigned-clock-rates = <500000000>, <133000000>;
+ };
+
+ pgc_hdmi_phy: power-domain@15 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_HDMI_PHY>;
+ };
+
pgc_mipi_phy2: power-domain@16 {
#power-domain-cells = <0>;
reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
@@ -1513,6 +1530,16 @@
status = "disabled";
};
+ aud2htx: aud2htx@30cb0000 {
+ compatible = "fsl,imx8mp-aud2htx";
+ reg = <0x30cb0000 0x10000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>;
+ clock-names = "bus";
+ dmas = <&sdma2 26 2 0>;
+ dma-names = "tx";
+ status = "disabled";
+ };
};
sdma3: dma-controller@30e00000 {
@@ -1630,7 +1657,7 @@
compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
reg = <0x32e40000 0x10000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <500000000>;
+ clock-frequency = <266000000>;
clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
<&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
<&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
@@ -1640,7 +1667,7 @@
<&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
<&clk IMX8MP_CLK_24M>;
- assigned-clock-rates = <500000000>;
+ assigned-clock-rates = <266000000>;
power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
status = "disabled";
@@ -1725,6 +1752,13 @@
remote-endpoint = <&lcdif1_to_dsim>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ mipi_dsi_out: endpoint {
+ };
+ };
};
};
@@ -1889,6 +1923,136 @@
#power-domain-cells = <1>;
#clock-cells = <0>;
};
+
+ hdmi_blk_ctrl: blk-ctrl@32fc0000 {
+ compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+ reg = <0x32fc0000 0x1000>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_ROOT>,
+ <&clk IMX8MP_CLK_HDMI_REF_266M>,
+ <&clk IMX8MP_CLK_HDMI_24M>,
+ <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+ clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
+ power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>,
+ <&pgc_hdmimix>, <&pgc_hdmimix>,
+ <&pgc_hdmimix>, <&pgc_hdmimix>,
+ <&pgc_hdmimix>, <&pgc_hdmi_phy>,
+ <&pgc_hdmimix>, <&pgc_hdmimix>;
+ power-domain-names = "bus", "irqsteer", "lcdif",
+ "pai", "pvi", "trng",
+ "hdmi-tx", "hdmi-tx-phy",
+ "hdcp", "hrv";
+ #power-domain-cells = <1>;
+ };
+
+ irqsteer_hdmi: interrupt-controller@32fc2000 {
+ compatible = "fsl,imx-irqsteer";
+ reg = <0x32fc2000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ fsl,channel = <1>;
+ fsl,num-irqs = <64>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>;
+ clock-names = "ipg";
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
+ };
+
+ hdmi_pvi: display-bridge@32fc4000 {
+ compatible = "fsl,imx8mp-hdmi-pvi";
+ reg = <0x32fc4000 0x1000>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ interrupts = <12>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pvi_from_lcdif3: endpoint {
+ remote-endpoint = <&lcdif3_to_pvi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pvi_to_hdmi_tx: endpoint {
+ remote-endpoint = <&hdmi_tx_from_pvi>;
+ };
+ };
+ };
+ };
+
+ lcdif3: display-controller@32fc6000 {
+ compatible = "fsl,imx8mp-lcdif";
+ reg = <0x32fc6000 0x1000>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ interrupts = <8>;
+ clocks = <&hdmi_tx_phy>,
+ <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_ROOT>;
+ clock-names = "pix", "axi", "disp_axi";
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
+ status = "disabled";
+
+ port {
+ lcdif3_to_pvi: endpoint {
+ remote-endpoint = <&pvi_from_lcdif3>;
+ };
+ };
+ };
+
+ hdmi_tx: hdmi@32fd8000 {
+ compatible = "fsl,imx8mp-hdmi-tx";
+ reg = <0x32fd8000 0x7eff>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ interrupts = <0>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_REF_266M>,
+ <&clk IMX8MP_CLK_32K>,
+ <&hdmi_tx_phy>;
+ clock-names = "iahb", "isfr", "cec", "pix";
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+ reg-io-width = <1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_tx_from_pvi: endpoint {
+ remote-endpoint = <&pvi_to_hdmi_tx>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ /* Point endpoint to the HDMI connector */
+ };
+ };
+ };
+
+ hdmi_tx_phy: phy@32fdff00 {
+ compatible = "fsl,imx8mp-hdmi-phy";
+ reg = <0x32fdff00 0x100>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_24M>;
+ clock-names = "apb", "ref";
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
pcie: pcie@33800000 {
diff --git a/dts/upstream/src/arm64/freescale/imx8mq-hummingboard-pulse.dts b/dts/upstream/src/arm64/freescale/imx8mq-hummingboard-pulse.dts
index 366693f..e92b5d5 100644
--- a/dts/upstream/src/arm64/freescale/imx8mq-hummingboard-pulse.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mq-hummingboard-pulse.dts
@@ -42,7 +42,7 @@
status = "okay";
typec_ptn5100: usb-typec@50 {
- compatible = "nxp,ptn5110";
+ compatible = "nxp,ptn5110", "tcpci";
reg = <0x50>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mq-librem5-devkit.dts b/dts/upstream/src/arm64/freescale/imx8mq-librem5-devkit.dts
index 8055a2c..b268ba7 100644
--- a/dts/upstream/src/arm64/freescale/imx8mq-librem5-devkit.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mq-librem5-devkit.dts
@@ -429,7 +429,7 @@
};
typec_ptn5100: usb-typec@52 {
- compatible = "nxp,ptn5110";
+ compatible = "nxp,ptn5110", "tcpci";
reg = <0x52>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mq.dtsi b/dts/upstream/src/arm64/freescale/imx8mq.dtsi
index c6dc3ba..e03186b 100644
--- a/dts/upstream/src/arm64/freescale/imx8mq.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mq.dtsi
@@ -1290,6 +1290,13 @@
remote-endpoint = <&lcdif_mipi_dsi>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ mipi_dsi_out: endpoint {
+ };
+ };
};
};
diff --git a/dts/upstream/src/arm64/freescale/imx8qm-mek.dts b/dts/upstream/src/arm64/freescale/imx8qm-mek.dts
index 77ac0ef..6e05361 100644
--- a/dts/upstream/src/arm64/freescale/imx8qm-mek.dts
+++ b/dts/upstream/src/arm64/freescale/imx8qm-mek.dts
@@ -36,9 +36,23 @@
regulator-name = "SD1_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ reg_vref_1v8: regulator-adc-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&adc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0>;
+ vref-supply = <&reg_vref_1v8>;
+ status = "okay";
};
&i2c1 {
@@ -71,6 +85,37 @@
status = "okay";
};
+&lpspi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>;
+ cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ spidev0: spi@0 {
+ reg = <0>;
+ compatible = "rohm,dh2228fv";
+ spi-max-frequency = <30000000>;
+ };
+};
+
+&flexspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi0>;
+ status = "okay";
+
+ flash0: flash@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <133000000>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ };
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
@@ -130,6 +175,12 @@
>;
};
+ pinctrl_adc0: adc0grp {
+ fsl,pins = <
+ IMX8QM_ADC_IN0_DMA_ADC0_IN0 0xc0000060
+ >;
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020
@@ -149,6 +200,41 @@
>;
};
+ pinctrl_lpspi2: lpspi2grp {
+ fsl,pins = <
+ IMX8QM_SPI2_SCK_DMA_SPI2_SCK 0x06000040
+ IMX8QM_SPI2_SDO_DMA_SPI2_SDO 0x06000040
+ IMX8QM_SPI2_SDI_DMA_SPI2_SDI 0x06000040
+ >;
+ };
+
+ pinctrl_lpspi2_cs: lpspi2csgrp {
+ fsl,pins = <
+ IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10 0x21
+ >;
+ };
+
+ pinctrl_flexspi0: flexspi0grp {
+ fsl,pins = <
+ IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021
+ IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021
+ IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021
+ IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021
+ IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021
+ IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021
+ IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021
+ IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021
+ IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021
+ IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021
+ IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021
+ IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021
+ IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021
+ IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021
+ IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021
+ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021
+ >;
+ };
+
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020
diff --git a/dts/upstream/src/arm64/freescale/imx8qxp-mek.dts b/dts/upstream/src/arm64/freescale/imx8qxp-mek.dts
index 8360bb8..cee13e5 100644
--- a/dts/upstream/src/arm64/freescale/imx8qxp-mek.dts
+++ b/dts/upstream/src/arm64/freescale/imx8qxp-mek.dts
@@ -44,6 +44,22 @@
};
};
};
+
+ sound-wm8960 {
+ compatible = "fsl,imx-audio-wm8960";
+ model = "wm8960-audio";
+ audio-cpu = <&sai1>;
+ audio-codec = <&wm8960>;
+ hp-det-gpio = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+ audio-routing = "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB";
+ };
};
&dsp {
@@ -149,7 +165,7 @@
};
ptn5110: tcpc@50 {
- compatible = "nxp,ptn5110";
+ compatible = "nxp,ptn5110", "tcpci";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec>;
reg = <0x50>;
@@ -188,6 +204,47 @@
};
+&cm40_i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_cm40_i2c>;
+ pinctrl-1 = <&pinctrl_cm40_i2c_gpio>;
+ scl-gpios = <&lsio_gpio1 10 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&lsio_gpio1 9 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ wm8960: audio-codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk";
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>,
+ <49152000>,
+ <12288000>,
+ <12288000>;
+ wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ };
+
+ pca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&cm40_intmux {
+ status = "okay";
+};
+
&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
@@ -218,6 +275,53 @@
status = "okay";
};
+&sai0 {
+ #sound-dai-cells = <0>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai0>;
+ status = "okay";
+};
+
+&sai1 {
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ status = "okay";
+};
+
+&sai4 {
+ assigned-clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai4_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+ fsl,sai-asynchronous;
+ status = "okay";
+};
+
+&sai5 {
+ assigned-clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai5_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+ fsl,sai-asynchronous;
+ status = "okay";
+};
+
&thermal_zones {
pmic-thermal {
polling-delay-passive = <250>;
@@ -314,6 +418,21 @@
};
&iomuxc {
+
+ pinctrl_cm40_i2c: cm40i2cgrp {
+ fsl,pins = <
+ IMX8QXP_ADC_IN1_M40_I2C0_SDA 0x0600004c
+ IMX8QXP_ADC_IN0_M40_I2C0_SCL 0x0600004c
+ >;
+ };
+
+ pinctrl_cm40_i2c_gpio: cm40i2cgpio-grp {
+ fsl,pins = <
+ IMX8QXP_ADC_IN1_LSIO_GPIO1_IO09 0xc600004c
+ IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10 0xc600004c
+ >;
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020
@@ -385,6 +504,25 @@
>;
};
+ pinctrl_sai0: sai0grp {
+ fsl,pins = <
+ IMX8QXP_SAI0_TXD_ADMA_SAI0_TXD 0x06000060
+ IMX8QXP_SAI0_RXD_ADMA_SAI0_RXD 0x06000040
+ IMX8QXP_SAI0_TXC_ADMA_SAI0_TXC 0x06000040
+ IMX8QXP_SAI0_TXFS_ADMA_SAI0_TXFS 0x06000040
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD 0x06000040
+ IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC 0x06000040
+ IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS 0x06000040
+ IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD 0x06000060
+ IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x06000040
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
diff --git a/dts/upstream/src/arm64/freescale/imx8qxp.dtsi b/dts/upstream/src/arm64/freescale/imx8qxp.dtsi
index 10e16d8..0313f29 100644
--- a/dts/upstream/src/arm64/freescale/imx8qxp.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8qxp.dtsi
@@ -317,6 +317,7 @@
/* sorted in register address */
#include "imx8-ss-img.dtsi"
#include "imx8-ss-vpu.dtsi"
+ #include "imx8-ss-cm40.dtsi"
#include "imx8-ss-gpu0.dtsi"
#include "imx8-ss-adma.dtsi"
#include "imx8-ss-conn.dtsi"
diff --git a/dts/upstream/src/arm64/freescale/imx8ulp-evk.dts b/dts/upstream/src/arm64/freescale/imx8ulp-evk.dts
index 24bb253..e937e5f 100644
--- a/dts/upstream/src/arm64/freescale/imx8ulp-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx8ulp-evk.dts
@@ -127,12 +127,70 @@
pinctrl-1 = <&pinctrl_lpi2c7>;
status = "okay";
+ ptn5150_1: typec@1d {
+ compatible = "nxp,ptn5150";
+ reg = <0x1d>;
+ int-gpios = <&gpiof 3 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec1>;
+ status = "disabled";
+ };
+
pcal6408: gpio@21 {
compatible = "nxp,pcal9554b";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
+
+ ptn5150_2: typec@3d {
+ compatible = "nxp,ptn5150";
+ reg = <0x3d>;
+ int-gpios = <&gpiof 5 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec2>;
+ status = "disabled";
+ };
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ over-current-active-low;
+ status = "okay";
+};
+
+&usbphy1 {
+ fsl,tx-d-cal = <110>;
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ over-current-active-low;
+ status = "okay";
+};
+
+&usbphy2 {
+ fsl,tx-d-cal = <110>;
+ status = "okay";
+};
+
+&usbmisc2 {
+ status = "okay";
};
&usdhc0 {
@@ -224,6 +282,32 @@
>;
};
+ pinctrl_typec1: typec1grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF3__PTF3 0x3
+ >;
+ };
+
+ pinctrl_typec2: typec2grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF5__PTF5 0x3
+ >;
+ };
+
+ pinctrl_usb1: usb1grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF2__USB0_ID 0x10003
+ MX8ULP_PAD_PTF4__USB0_OC 0x10003
+ >;
+ };
+
+ pinctrl_usb2: usb2grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTD23__USB1_ID 0x10003
+ MX8ULP_PAD_PTF6__USB1_OC 0x10003
+ >;
+ };
+
pinctrl_usdhc0: usdhc0grp {
fsl,pins = <
MX8ULP_PAD_PTD1__SDHC0_CMD 0x3
diff --git a/dts/upstream/src/arm64/freescale/imx8ulp.dtsi b/dts/upstream/src/arm64/freescale/imx8ulp.dtsi
index c4a0082..e32d5af 100644
--- a/dts/upstream/src/arm64/freescale/imx8ulp.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8ulp.dtsi
@@ -252,6 +252,38 @@
#reset-cells = <1>;
};
+ crypto: crypto@292e0000 {
+ compatible = "fsl,sec-v4.0";
+ reg = <0x292e0000 0x10000>;
+ ranges = <0 0x292e0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
tpm5: tpm@29340000 {
compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
reg = <0x29340000 0x1000>;
@@ -472,6 +504,68 @@
status = "disabled";
};
+ usbotg1: usb@29900000 {
+ compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+ reg = <0x29900000 0x200>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_USB0>;
+ power-domains = <&scmi_devpd IMX8ULP_PD_USB0>;
+ phys = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x8>;
+ rx-burst-size-dword = <0x8>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@29900200 {
+ compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ reg = <0x29900200 0x200>;
+ #index-cells = <1>;
+ status = "disabled";
+ };
+
+ usbphy1: usb-phy@29910000 {
+ compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+ reg = <0x29910000 0x10000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@29920000 {
+ compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+ reg = <0x29920000 0x200>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_USB1>;
+ power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+ phys = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x8>;
+ rx-burst-size-dword = <0x8>;
+ status = "disabled";
+ };
+
+ usbmisc2: usbmisc@29920200 {
+ compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ reg = <0x29920200 0x200>;
+ #index-cells = <1>;
+ status = "disabled";
+ };
+
+ usbphy2: usb-phy@29930000 {
+ compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+ reg = <0x29930000 0x10000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
fec: ethernet@29950000 {
compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
reg = <0x29950000 0x10000>;
diff --git a/dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts b/dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts
index 9921ea13..bd98eff 100644
--- a/dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/usb/pd.h>
#include "imx93.dtsi"
/ {
@@ -38,7 +39,7 @@
no-map;
};
- vdev1vring0: vdev1vring0@a4000000 {
+ vdev1vring0: vdev1vring0@a4010000 {
reg = <0 0xa4010000 0 0x8000>;
no-map;
};
@@ -48,8 +49,8 @@
no-map;
};
- rsc_table: rsc-table@2021f000 {
- reg = <0 0x2021f000 0 0x1000>;
+ rsc_table: rsc-table@2021e000 {
+ reg = <0 0x2021e000 0 0x1000>;
no-map;
};
@@ -104,9 +105,85 @@
status = "okay";
};
-&eqos {
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ ptn5110: tcpc@50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+ typec1_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ op-sink-microwatt = <15000000>;
+ self-powered;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+
+ ptn5110_2: tcpc@51 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x51>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+ typec2_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ op-sink-microwatt = <15000000>;
+ self-powered;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec2_dr_sw: endpoint {
+ remote-endpoint = <&usb2_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&eqos {
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_eqos>;
+ pinctrl-1 = <&pinctrl_eqos_sleep>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy1>;
status = "okay";
@@ -120,13 +197,17 @@
ethphy1: ethernet-phy@1 {
reg = <1>;
eee-broken-1000t;
+ reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
};
};
};
&fec {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy2>;
fsl,magic-packet;
@@ -140,6 +221,9 @@
ethphy2: ethernet-phy@2 {
reg = <2>;
eee-broken-1000t;
+ reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
};
};
};
@@ -156,26 +240,62 @@
status = "okay";
};
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
+&usbotg2 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ disable-over-current;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+ port {
+ usb2_drd_sw: endpoint {
+ remote-endpoint = <&typec2_dr_sw>;
+ };
+ };
+};
+
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1>;
- pinctrl-2 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&usdhc2 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
- no-sdio;
no-mmc;
};
@@ -183,6 +303,118 @@
status = "okay";
};
+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-1 = <&pinctrl_lpi2c2>;
+ status = "okay";
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ reg = <0x22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <610000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <670000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4{
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5{
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1060000>;
+ regulator-max-microvolt = <1140000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <840000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&lpi2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ pcf2131: rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
@@ -203,6 +435,25 @@
>;
};
+ pinctrl_eqos_sleep: eqossleepgrp {
+ fsl,pins = <
+ MX93_PAD_ENET1_MDC__GPIO4_IO00 0x31e
+ MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x31e
+ MX93_PAD_ENET1_RD0__GPIO4_IO10 0x31e
+ MX93_PAD_ENET1_RD1__GPIO4_IO11 0x31e
+ MX93_PAD_ENET1_RD2__GPIO4_IO12 0x31e
+ MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e
+ MX93_PAD_ENET1_RXC__GPIO4_IO09 0x31e
+ MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x31e
+ MX93_PAD_ENET1_TD0__GPIO4_IO05 0x31e
+ MX93_PAD_ENET1_TD1__GPIO4_IO04 0x31e
+ MX93_PAD_ENET1_TD2__GPIO4_IO03 0x31e
+ MX93_PAD_ENET1_TD3__GPIO4_IO02 0x31e
+ MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e
+ MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x31e
+ >;
+ };
+
pinctrl_fec: fecgrp {
fsl,pins = <
MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e
@@ -222,6 +473,32 @@
>;
};
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_fec_sleep: fecsleepgrp {
+ fsl,pins = <
+ MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e
+ MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e
+ MX93_PAD_ENET2_RD0__GPIO4_IO24 0x51e
+ MX93_PAD_ENET2_RD1__GPIO4_IO25 0x51e
+ MX93_PAD_ENET2_RD2__GPIO4_IO26 0x51e
+ MX93_PAD_ENET2_RD3__GPIO4_IO27 0x51e
+ MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e
+ MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
+ MX93_PAD_ENET2_TD0__GPIO4_IO19 0x51e
+ MX93_PAD_ENET2_TD1__GPIO4_IO18 0x51e
+ MX93_PAD_ENET2_TD2__GPIO4_IO17 0x51e
+ MX93_PAD_ENET2_TD3__GPIO4_IO16 0x51e
+ MX93_PAD_ENET2_TXC__GPIO4_IO21 0x51e
+ MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
@@ -238,9 +515,63 @@
>;
};
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
+ MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_pcal6524: pcal6524grp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
+ >;
+ };
+
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
+ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
@@ -267,9 +598,41 @@
>;
};
+ pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x51e
+ >;
+ };
+
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
@@ -279,4 +642,17 @@
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
+
+ pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CLK__GPIO3_IO01 0x51e
+ MX93_PAD_SD2_CMD__GPIO3_IO02 0x51e
+ MX93_PAD_SD2_DATA0__GPIO3_IO03 0x51e
+ MX93_PAD_SD2_DATA1__GPIO3_IO04 0x51e
+ MX93_PAD_SD2_DATA2__GPIO3_IO05 0x51e
+ MX93_PAD_SD2_DATA3__GPIO3_IO06 0x51e
+ MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
+ >;
+ };
+
};
diff --git a/dts/upstream/src/arm64/freescale/imx93.dtsi b/dts/upstream/src/arm64/freescale/imx93.dtsi
index 601c94e..4a3f423 100644
--- a/dts/upstream/src/arm64/freescale/imx93.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx93.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -183,6 +184,20 @@
status = "disabled";
};
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+ clock-names = "main_clk";
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+ clock-names = "main_clk";
+ };
+
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -316,6 +331,8 @@
clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
<&clk IMX93_CLK_BUS_AON>;
clock-names = "per", "ipg";
+ dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -328,6 +345,8 @@
clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
<&clk IMX93_CLK_BUS_AON>;
clock-names = "per", "ipg";
+ dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -340,6 +359,8 @@
clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
<&clk IMX93_CLK_BUS_AON>;
clock-names = "per", "ipg";
+ dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -352,6 +373,8 @@
clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
<&clk IMX93_CLK_BUS_AON>;
clock-names = "per", "ipg";
+ dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -361,7 +384,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART1_GATE>;
clock-names = "ipg";
- dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
+ dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -372,7 +395,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART2_GATE>;
clock-names = "ipg";
- dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
+ dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -400,7 +423,7 @@
<&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+ dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -509,8 +532,7 @@
reg = <0x44530000 0x10000>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_ADC1_GATE>;
clock-names = "ipg";
#io-channel-cells = <1>;
@@ -693,6 +715,8 @@
clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -705,6 +729,8 @@
clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -717,6 +743,8 @@
clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -729,6 +757,8 @@
clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -738,7 +768,7 @@
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART3_GATE>;
clock-names = "ipg";
- dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
+ dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -749,7 +779,7 @@
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART4_GATE>;
clock-names = "ipg";
- dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
+ dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -760,7 +790,7 @@
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART5_GATE>;
clock-names = "ipg";
- dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
+ dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -771,7 +801,7 @@
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART6_GATE>;
clock-names = "ipg";
- dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
+ dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -814,7 +844,7 @@
<&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+ dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -827,7 +857,7 @@
<&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+ dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -846,7 +876,7 @@
<&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_AUD_XCVR_GATE>;
clock-names = "ipg", "phy", "spba", "pll_ipg";
- dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+ dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -857,7 +887,7 @@
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART7_GATE>;
clock-names = "ipg";
- dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
+ dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -868,7 +898,7 @@
interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART8_GATE>;
clock-names = "ipg";
- dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
+ dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -882,6 +912,8 @@
clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -894,6 +926,8 @@
clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -906,6 +940,8 @@
clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -918,6 +954,8 @@
clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -930,6 +968,8 @@
clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -942,6 +982,8 @@
clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -954,6 +996,8 @@
clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -966,6 +1010,8 @@
clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
<&clk IMX93_CLK_BUS_WAKEUP>;
clock-names = "per", "ipg";
+ dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -986,6 +1032,9 @@
<&clk IMX93_CLK_WAKEUP_AXI>,
<&clk IMX93_CLK_USDHC1_GATE>;
clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX93_CLK_USDHC1>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
@@ -1000,6 +1049,9 @@
<&clk IMX93_CLK_WAKEUP_AXI>,
<&clk IMX93_CLK_USDHC2_GATE>;
clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX93_CLK_USDHC2>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+ assigned-clock-rates = <400000000>;
bus-width = <4>;
fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
@@ -1030,6 +1082,8 @@
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+ nvmem-cells = <&eth_mac1>;
+ nvmem-cell-names = "mac-address";
status = "disabled";
};
@@ -1052,6 +1106,8 @@
assigned-clock-rates = <100000000>, <250000000>;
intf_mode = <&wakeupmix_gpr 0x28>;
snps,clk-csr = <0>;
+ nvmem-cells = <&eth_mac2>;
+ nvmem-cell-names = "mac-address";
status = "disabled";
};
@@ -1063,6 +1119,9 @@
<&clk IMX93_CLK_WAKEUP_AXI>,
<&clk IMX93_CLK_USDHC3_GATE>;
clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX93_CLK_USDHC3>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+ assigned-clock-rates = <400000000>;
bus-width = <4>;
fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
@@ -1136,6 +1195,15 @@
reg = <0x47510000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ eth_mac1: mac-address@4ec {
+ reg = <0x4ec 0x6>;
+ };
+
+ eth_mac2: mac-address@4f2 {
+ reg = <0x4f2 0x6>;
+ };
+
};
s4muap: mailbox@47520000 {
@@ -1167,6 +1235,50 @@
status = "disabled";
};
+ usbotg1: usb@4c100000 {
+ compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x4c100000 0x200>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+ <&clk IMX93_CLK_HSIO_32K_GATE>;
+ clock-names = "usb_ctrl_root", "usb_wakeup";
+ assigned-clocks = <&clk IMX93_CLK_HSIO>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+ assigned-clock-rates = <133000000>;
+ phys = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@4c100200 {
+ compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ reg = <0x4c100200 0x200>;
+ #index-cells = <1>;
+ };
+
+ usbotg2: usb@4c200000 {
+ compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x4c200000 0x200>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+ <&clk IMX93_CLK_HSIO_32K_GATE>;
+ clock-names = "usb_ctrl_root", "usb_wakeup";
+ assigned-clocks = <&clk IMX93_CLK_HSIO>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+ assigned-clock-rates = <133000000>;
+ phys = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ status = "disabled";
+ };
+
+ usbmisc2: usbmisc@4c200200 {
+ compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ reg = <0x4c200200 0x200>;
+ #index-cells = <1>;
+ };
+
ddr-pmu@4e300dc0 {
compatible = "fsl,imx93-ddr-pmu";
reg = <0x4e300dc0 0x200>;
diff --git a/dts/upstream/src/arm64/freescale/mba8mx.dtsi b/dts/upstream/src/arm64/freescale/mba8mx.dtsi
index 427467d..8152415 100644
--- a/dts/upstream/src/arm64/freescale/mba8mx.dtsi
+++ b/dts/upstream/src/arm64/freescale/mba8mx.dtsi
@@ -316,17 +316,11 @@
&mipi_dsi {
samsung,burst-clock-frequency = <891000000>;
samsung,esc-clock-frequency = <20000000>;
+};
- ports {
- port@1 {
- reg = <1>;
-
- mipi_dsi_out: endpoint {
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&lvds_bridge_in>;
- };
- };
- };
+&mipi_dsi_out {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&lvds_bridge_in>;
};
&pwm3 {
diff --git a/dts/upstream/src/arm64/freescale/s32g2.dtsi b/dts/upstream/src/arm64/freescale/s32g2.dtsi
index 5ac1cc9..fc19ae2 100644
--- a/dts/upstream/src/arm64/freescale/s32g2.dtsi
+++ b/dts/upstream/src/arm64/freescale/s32g2.dtsi
@@ -3,7 +3,7 @@
* NXP S32G2 SoC family
*
* Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2017-2021 NXP
+ * Copyright 2017-2021, 2024 NXP
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -14,6 +14,18 @@
#address-cells = <2>;
#size-cells = <2>;
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scmi_buf: shm@d0000000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0000000 0x0 0x80>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -77,6 +89,19 @@
};
firmware {
+ scmi {
+ compatible = "arm,scmi-smc";
+ arm,smc-id = <0xc20000fe>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shmem = <&scmi_buf>;
+
+ clks: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -113,6 +138,16 @@
status = "disabled";
};
+ usdhc0: mmc@402f0000 {
+ compatible = "nxp,s32g2-usdhc";
+ reg = <0x402f0000 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 32>, <&clks 31>, <&clks 33>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <8>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@50800000 {
compatible = "arm,gic-v3";
reg = <0x50800000 0x10000>,
diff --git a/dts/upstream/src/arm64/freescale/s32g274a-evb.dts b/dts/upstream/src/arm64/freescale/s32g274a-evb.dts
index 9118d8d..00070c9 100644
--- a/dts/upstream/src/arm64/freescale/s32g274a-evb.dts
+++ b/dts/upstream/src/arm64/freescale/s32g274a-evb.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2019-2021 NXP
+ * Copyright 2019-2021, 2024 NXP
*/
/dts-v1/;
@@ -32,3 +32,7 @@
&uart0 {
status = "okay";
};
+
+&usdhc0 {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/freescale/s32g274a-rdb2.dts b/dts/upstream/src/arm64/freescale/s32g274a-rdb2.dts
index e05ee85..b3fc128 100644
--- a/dts/upstream/src/arm64/freescale/s32g274a-rdb2.dts
+++ b/dts/upstream/src/arm64/freescale/s32g274a-rdb2.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2019-2021 NXP
+ * Copyright 2019-2021, 2024 NXP
*/
/dts-v1/;
@@ -38,3 +38,7 @@
&uart1 {
status = "okay";
};
+
+&usdhc0 {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/freescale/s32g3.dtsi b/dts/upstream/src/arm64/freescale/s32g3.dtsi
new file mode 100644
index 0000000..c1b0899
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/s32g3.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2021-2023 NXP
+ *
+ * Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
+ * Ciprian Costea <ciprianmarian.costea@nxp.com>
+ * Andra-Teodora Ilie <andra.ilie@nxp.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "nxp,s32g3";
+ interrupt-parent = <&gic>;
+ #address-cells = <0x02>;
+ #size-cells = <0x02>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+
+ core1 {
+ cpu = <&cpu5>;
+ };
+
+ core2 {
+ cpu = <&cpu6>;
+ };
+
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ clocks = <&dfs 0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ clocks = <&dfs 0>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ enable-method = "psci";
+ clocks = <&dfs 0>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ enable-method = "psci";
+ clocks = <&dfs 0>;
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x100>;
+ enable-method = "psci";
+ clocks = <&dfs 0>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x101>;
+ enable-method = "psci";
+ clocks = <&dfs 0>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x102>;
+ enable-method = "psci";
+ clocks = <&dfs 0>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x103>;
+ enable-method = "psci";
+ clocks = <&dfs 0>;
+ };
+ };
+
+ firmware {
+ scmi: scmi {
+ compatible = "arm,scmi-smc";
+ shmem = <&scmi_shmem>;
+ arm,smc-id = <0xc20000fe>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dfs: protocol@13 {
+ reg = <0x13>;
+ #clock-cells = <1>;
+ };
+
+ clks: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+
+ psci: psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+ };
+
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scmi_shmem: shm@d0000000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0000000 0x0 0x80>;
+ no-map;
+ };
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x80000000>;
+
+ uart0: serial@401c8000 {
+ compatible = "nxp,s32g3-linflexuart",
+ "fsl,s32v234-linflexuart";
+ reg = <0x401c8000 0x3000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ uart1: serial@401cc000 {
+ compatible = "nxp,s32g3-linflexuart",
+ "fsl,s32v234-linflexuart";
+ reg = <0x401cc000 0x3000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ uart2: serial@402bc000 {
+ compatible = "nxp,s32g3-linflexuart",
+ "fsl,s32v234-linflexuart";
+ reg = <0x402bc000 0x3000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ usdhc0: mmc@402f0000 {
+ compatible = "nxp,s32g3-usdhc",
+ "nxp,s32g2-usdhc";
+ reg = <0x402f0000 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 32>,
+ <&clks 31>,
+ <&clks 33>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@50800000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x50800000 0x10000>,
+ <0x50900000 0x200000>,
+ <0x50400000 0x2000>,
+ <0x50410000 0x2000>,
+ <0x50420000 0x2000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* sec-phys */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* phys */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* virt */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, /* hyp-phys */
+ <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; /* hyp-virt */
+ arm,no-tick-in-suspend;
+ };
+};
diff --git a/dts/upstream/src/arm64/freescale/s32g399a-rdb3.dts b/dts/upstream/src/arm64/freescale/s32g399a-rdb3.dts
new file mode 100644
index 0000000..9d67481
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/s32g399a-rdb3.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2021-2023 NXP
+ *
+ * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)
+ */
+
+/dts-v1/;
+
+#include "s32g3.dtsi"
+
+/ {
+ model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)";
+ compatible = "nxp,s32g399a-rdb3", "nxp,s32g3";
+
+ aliases {
+ mmc0 = &usdhc0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* 4GiB RAM */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0 0x80000000>,
+ <0x8 0x80000000 0 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usdhc0 {
+ bus-width = <8>;
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/hisilicon/hi3798cv200.dtsi b/dts/upstream/src/arm64/hisilicon/hi3798cv200.dtsi
index ed1b5a7..f6bc001 100644
--- a/dts/upstream/src/arm64/hisilicon/hi3798cv200.dtsi
+++ b/dts/upstream/src/arm64/hisilicon/hi3798cv200.dtsi
@@ -31,6 +31,13 @@
device_type = "cpu";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-size = <0x8000>; /* 32 KiB */
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>; /* 32 KiB */
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&L2>;
};
cpu@1 {
@@ -38,6 +45,13 @@
device_type = "cpu";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-size = <0x8000>; /* 32 KiB */
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>; /* 32 KiB */
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&L2>;
};
cpu@2 {
@@ -45,6 +59,13 @@
device_type = "cpu";
reg = <0x0 0x2>;
enable-method = "psci";
+ d-cache-size = <0x8000>; /* 32 KiB */
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>; /* 32 KiB */
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&L2>;
};
cpu@3 {
@@ -52,13 +73,33 @@
device_type = "cpu";
reg = <0x0 0x3>;
enable-method = "psci";
+ d-cache-size = <0x8000>; /* 32 KiB */
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>; /* 32 KiB */
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&L2>;
};
};
+ L2: l2-cache {
+ compatible = "cache";
+ cache-unified;
+ cache-size = <0x80000>; /* 512 KiB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-level = <2>;
+ };
+
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */
- <0x0 0xf1002000 0x0 0x100>; /* GICC */
+ <0x0 0xf1002000 0x0 0x2000>, /* GICC */
+ <0x0 0xf1004000 0x0 0x2000>, /* GICH */
+ <0x0 0xf1006000 0x0 0x2000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
#address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
diff --git a/dts/upstream/src/arm64/hisilicon/hi6220-hikey.dts b/dts/upstream/src/arm64/hisilicon/hi6220-hikey.dts
index f0672ec..2d304ef 100644
--- a/dts/upstream/src/arm64/hisilicon/hi6220-hikey.dts
+++ b/dts/upstream/src/arm64/hisilicon/hi6220-hikey.dts
@@ -82,7 +82,7 @@
};
};
- reg_sys_5v: regulator@0 {
+ reg_sys_5v: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "SYS_5V";
regulator-min-microvolt = <5000000>;
@@ -91,7 +91,7 @@
regulator-always-on;
};
- reg_vdd_3v3: regulator@1 {
+ reg_vdd_3v3: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
@@ -101,7 +101,7 @@
vin-supply = <&reg_sys_5v>;
};
- reg_5v_hub: regulator@2 {
+ reg_5v_hub: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "5V_HUB";
regulator-min-microvolt = <5000000>;
@@ -514,6 +514,7 @@
#address-cells = <1>;
#size-cells = <0>;
port@0 {
+ reg = <0>;
adv7533_in: endpoint {
remote-endpoint = <&dsi_out0>;
};
diff --git a/dts/upstream/src/arm64/hisilicon/hi6220.dtsi b/dts/upstream/src/arm64/hisilicon/hi6220.dtsi
index be808bb..a589954 100644
--- a/dts/upstream/src/arm64/hisilicon/hi6220.dtsi
+++ b/dts/upstream/src/arm64/hisilicon/hi6220.dtsi
@@ -852,7 +852,7 @@
clock-names = "wdog_clk", "apb_pclk";
};
- tsensor: tsensor@0,f7030700 {
+ tsensor: tsensor@f7030700 {
compatible = "hisilicon,tsensor";
reg = <0x0 0xf7030700 0x0 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/upstream/src/arm64/hisilicon/hip05-d02.dts b/dts/upstream/src/arm64/hisilicon/hip05-d02.dts
index c4eaebb..b7792d4 100644
--- a/dts/upstream/src/arm64/hisilicon/hip05-d02.dts
+++ b/dts/upstream/src/arm64/hisilicon/hip05-d02.dts
@@ -54,7 +54,7 @@
ranges = <0 0 0x0 0x90000000 0x08000000>,
<1 0 0x0 0x98000000 0x08000000>;
- nor-flash@0,0 {
+ nor-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "numonyx,js28f00a", "cfi-flash";
@@ -75,7 +75,7 @@
};
};
- cpld@1,0 {
+ cpld@100000000 {
compatible = "hisilicon,hip05-cpld";
reg = <1 0x0 0x100>;
};
diff --git a/dts/upstream/src/arm64/hisilicon/hip05.dtsi b/dts/upstream/src/arm64/hisilicon/hip05.dtsi
index 65ddc06..d0912ca 100644
--- a/dts/upstream/src/arm64/hisilicon/hip05.dtsi
+++ b/dts/upstream/src/arm64/hisilicon/hip05.dtsi
@@ -279,6 +279,12 @@
};
};
+ refclk200mhz: refclk200mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -298,12 +304,6 @@
#size-cells = <2>;
ranges;
- refclk200mhz: refclk200mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
uart0: serial@80300000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x80300000 0x0 0x10000>;
diff --git a/dts/upstream/src/arm64/hisilicon/hip06.dtsi b/dts/upstream/src/arm64/hisilicon/hip06.dtsi
index f46c33d..3d7285e 100644
--- a/dts/upstream/src/arm64/hisilicon/hip06.dtsi
+++ b/dts/upstream/src/arm64/hisilicon/hip06.dtsi
@@ -258,6 +258,48 @@
};
};
+ eth2: ethernet-0 {
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <0>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth3: ethernet-1 {
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth0: ethernet-4 {
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <4>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth1: ethernet-5 {
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <5>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ refclk: refclk {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ #clock-cells = <0>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -374,12 +416,6 @@
};
};
- refclk: refclk {
- compatible = "fixed-clock";
- clock-frequency = <50000000>;
- #clock-cells = <0>;
- };
-
usb_ohci: usb@a7030000 {
compatible = "generic-ohci";
reg = <0x0 0xa7030000 0x0 0x10000>;
@@ -436,7 +472,7 @@
};
};
- dsaf0: dsa@c7000000 {
+ dsaf0: dsa@c5000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "hisilicon,hns-dsaf-v2";
@@ -570,42 +606,6 @@
};
};
- eth0: ethernet-4 {
- compatible = "hisilicon,hns-nic-v2";
- ae-handle = <&dsaf0>;
- port-idx-in-ae = <4>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
- dma-coherent;
- };
-
- eth1: ethernet-5 {
- compatible = "hisilicon,hns-nic-v2";
- ae-handle = <&dsaf0>;
- port-idx-in-ae = <5>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
- dma-coherent;
- };
-
- eth2: ethernet-0 {
- compatible = "hisilicon,hns-nic-v2";
- ae-handle = <&dsaf0>;
- port-idx-in-ae = <0>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
- dma-coherent;
- };
-
- eth3: ethernet-1 {
- compatible = "hisilicon,hns-nic-v2";
- ae-handle = <&dsaf0>;
- port-idx-in-ae = <1>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
- dma-coherent;
- };
-
sas0: sas@c3000000 {
compatible = "hisilicon,hip06-sas-v2";
reg = <0 0xc3000000 0 0x10000>;
@@ -733,7 +733,7 @@
status = "disabled";
};
- pcie0: pcie@a0090000 {
+ pcie0: pcie@b0000000 {
compatible = "hisilicon,hip06-pcie-ecam";
reg = <0 0xb0000000 0 0x2000000>,
<0 0xa0090000 0 0x10000>;
diff --git a/dts/upstream/src/arm64/hisilicon/hip07.dtsi b/dts/upstream/src/arm64/hisilicon/hip07.dtsi
index 81d907e..00a6bfa 100644
--- a/dts/upstream/src/arm64/hisilicon/hip07.dtsi
+++ b/dts/upstream/src/arm64/hisilicon/hip07.dtsi
@@ -1013,6 +1013,42 @@
};
};
+ eth0: ethernet-0 {
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <4>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth1: ethernet-1 {
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <5>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth2: ethernet-2 {
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <0>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
+ eth3: ethernet-3 {
+ compatible = "hisilicon,hns-nic-v2";
+ ae-handle = <&dsaf0>;
+ port-idx-in-ae = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ dma-coherent;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -1343,7 +1379,7 @@
};
};
- dsaf0: dsa@c7000000 {
+ dsaf0: dsa@c5000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "hisilicon,hns-dsaf-v2";
@@ -1483,42 +1519,6 @@
};
};
- eth0: ethernet@4 {
- compatible = "hisilicon,hns-nic-v2";
- ae-handle = <&dsaf0>;
- port-idx-in-ae = <4>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
- dma-coherent;
- };
-
- eth1: ethernet@5 {
- compatible = "hisilicon,hns-nic-v2";
- ae-handle = <&dsaf0>;
- port-idx-in-ae = <5>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
- dma-coherent;
- };
-
- eth2: ethernet@0 {
- compatible = "hisilicon,hns-nic-v2";
- ae-handle = <&dsaf0>;
- port-idx-in-ae = <0>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
- dma-coherent;
- };
-
- eth3: ethernet@1 {
- compatible = "hisilicon,hns-nic-v2";
- ae-handle = <&dsaf0>;
- port-idx-in-ae = <1>;
- local-mac-address = [00 00 00 00 00 00];
- status = "disabled";
- dma-coherent;
- };
-
infiniband@c4000000 {
compatible = "hisilicon,hns-roce-v1";
reg = <0x0 0xc4000000 0x0 0x100000>;
@@ -1724,7 +1724,7 @@
status = "disabled";
};
- p0_pcie2_a: pcie@a00a0000 {
+ p0_pcie2_a: pcie@af800000 {
compatible = "hisilicon,hip07-pcie-ecam";
reg = <0 0xaf800000 0 0x800000>,
<0 0xa00a0000 0 0x10000>;
@@ -1745,7 +1745,7 @@
0x0 0 0 4 &mbigen_pcie2_a 671 4>;
status = "disabled";
};
- p0_sec_a: crypto@d2000000 {
+ p0_sec_a: crypto@d0000000 {
compatible = "hisilicon,hip07-sec";
reg = <0x0 0xd0000000 0x0 0x10000>,
<0x0 0xd2000000 0x0 0x10000>,
@@ -1786,7 +1786,7 @@
<605 1>, <606 4>,
<607 1>, <608 4>;
};
- p0_sec_b: crypto@8,d2000000 {
+ p0_sec_b: crypto@8d0000000 {
compatible = "hisilicon,hip07-sec";
reg = <0x8 0xd0000000 0x0 0x10000>,
<0x8 0xd2000000 0x0 0x10000>,
@@ -1827,7 +1827,7 @@
<605 1>, <606 4>,
<607 1>, <608 4>;
};
- p1_sec_a: crypto@400,d2000000 {
+ p1_sec_a: crypto@400d0000000 {
compatible = "hisilicon,hip07-sec";
reg = <0x400 0xd0000000 0x0 0x10000>,
<0x400 0xd2000000 0x0 0x10000>,
@@ -1868,7 +1868,7 @@
<605 1>, <606 4>,
<607 1>, <608 4>;
};
- p1_sec_b: crypto@408,d2000000 {
+ p1_sec_b: crypto@408d0000000 {
compatible = "hisilicon,hip07-sec";
reg = <0x408 0xd0000000 0x0 0x10000>,
<0x408 0xd2000000 0x0 0x10000>,
diff --git a/dts/upstream/src/arm64/intel/keembay-soc.dtsi b/dts/upstream/src/arm64/intel/keembay-soc.dtsi
index 781761d..ae00e9e 100644
--- a/dts/upstream/src/arm64/intel/keembay-soc.dtsi
+++ b/dts/upstream/src/arm64/intel/keembay-soc.dtsi
@@ -70,7 +70,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/dts/upstream/src/arm64/intel/socfpga_agilex.dtsi b/dts/upstream/src/arm64/intel/socfpga_agilex.dtsi
index 76aafa1..2a5eeb2 100644
--- a/dts/upstream/src/arm64/intel/socfpga_agilex.dtsi
+++ b/dts/upstream/src/arm64/intel/socfpga_agilex.dtsi
@@ -80,7 +80,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/lg/lg1312-ref.dts b/dts/upstream/src/arm64/lg/lg1312-ref.dts
index 260a2c5..cdd10f1 100644
--- a/dts/upstream/src/arm64/lg/lg1312-ref.dts
+++ b/dts/upstream/src/arm64/lg/lg1312-ref.dts
@@ -22,7 +22,7 @@
serial2 = &uart2;
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x20000000>;
};
diff --git a/dts/upstream/src/arm64/lg/lg1313-ref.dts b/dts/upstream/src/arm64/lg/lg1313-ref.dts
index e89ae85..6ace977 100644
--- a/dts/upstream/src/arm64/lg/lg1313-ref.dts
+++ b/dts/upstream/src/arm64/lg/lg1313-ref.dts
@@ -22,7 +22,7 @@
serial2 = &uart2;
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x20000000>;
};
diff --git a/dts/upstream/src/arm64/marvell/ac5-98dx25xx.dtsi b/dts/upstream/src/arm64/marvell/ac5-98dx25xx.dtsi
index 5591939..75377c2 100644
--- a/dts/upstream/src/arm64/marvell/ac5-98dx25xx.dtsi
+++ b/dts/upstream/src/arm64/marvell/ac5-98dx25xx.dtsi
@@ -68,7 +68,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/dts/upstream/src/arm64/marvell/armada-3720-eDPU.dts b/dts/upstream/src/arm64/marvell/armada-3720-eDPU.dts
index d6d37a1..91c2f8b 100644
--- a/dts/upstream/src/arm64/marvell/armada-3720-eDPU.dts
+++ b/dts/upstream/src/arm64/marvell/armada-3720-eDPU.dts
@@ -25,8 +25,6 @@
/* Actual device is MV88E6361 */
switch: switch@0 {
compatible = "marvell,mv88e6190";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
status = "disabled";
diff --git a/dts/upstream/src/arm64/marvell/armada-3720-espressobin-ultra.dts b/dts/upstream/src/arm64/marvell/armada-3720-espressobin-ultra.dts
index 870bb38..b3cc2b7 100644
--- a/dts/upstream/src/arm64/marvell/armada-3720-espressobin-ultra.dts
+++ b/dts/upstream/src/arm64/marvell/armada-3720-espressobin-ultra.dts
@@ -114,54 +114,84 @@
};
&mdio {
+ /* Switch is @3, not @1 */
+ /delete-node/ ethernet-switch@1;
extphy: ethernet-phy@1 {
reg = <1>;
reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
};
-};
-&switch0 {
- reg = <3>;
+ switch0: ethernet-switch@3 {
+ compatible = "marvell,mv88e6085";
+ reg = <3>;
- reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+ dsa,member = <0 0>;
- ethernet-ports {
- switch0port1: ethernet-port@1 {
- reg = <1>;
- label = "lan0";
- phy-handle = <&switch0phy0>;
- };
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0port0: ethernet-port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
- switch0port2: ethernet-port@2 {
- reg = <2>;
- label = "lan1";
- phy-handle = <&switch0phy1>;
- };
+ switch0port1: ethernet-port@1 {
+ reg = <1>;
+ label = "lan0";
+ phy-handle = <&switch0phy0>;
+ };
- switch0port3: ethernet-port@3 {
- reg = <3>;
- label = "lan2";
- phy-handle = <&switch0phy2>;
- };
+ switch0port2: ethernet-port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
- switch0port4: ethernet-port@4 {
- reg = <4>;
- label = "lan3";
- phy-handle = <&switch0phy3>;
- };
+ switch0port3: ethernet-port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ };
- switch0port5: ethernet-port@5 {
- reg = <5>;
- label = "wan";
- phy-handle = <&extphy>;
- phy-mode = "sgmii";
+ switch0port4: ethernet-port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ switch0port5: ethernet-port@5 {
+ reg = <5>;
+ label = "wan";
+ phy-handle = <&extphy>;
+ phy-mode = "sgmii";
+ };
};
- };
- mdio {
- switch0phy3: ethernet-phy@14 {
- reg = <0x14>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+ switch0phy1: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+ switch0phy2: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+ switch0phy3: ethernet-phy@14 {
+ reg = <0x14>;
+ };
};
};
};
diff --git a/dts/upstream/src/arm64/marvell/armada-3720-turris-mox.dts b/dts/upstream/src/arm64/marvell/armada-3720-turris-mox.dts
index f1a9f22..54453b0 100644
--- a/dts/upstream/src/arm64/marvell/armada-3720-turris-mox.dts
+++ b/dts/upstream/src/arm64/marvell/armada-3720-turris-mox.dts
@@ -216,8 +216,6 @@
assigned-clock-rates = <20000000>;
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
diff --git a/dts/upstream/src/arm64/marvell/armada-37xx.dtsi b/dts/upstream/src/arm64/marvell/armada-37xx.dtsi
index 1cc3fa1..9603223 100644
--- a/dts/upstream/src/arm64/marvell/armada-37xx.dtsi
+++ b/dts/upstream/src/arm64/marvell/armada-37xx.dtsi
@@ -68,7 +68,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/dts/upstream/src/arm64/marvell/armada-ap80x.dtsi b/dts/upstream/src/arm64/marvell/armada-ap80x.dtsi
index 7ec7c78..fdf88cd 100644
--- a/dts/upstream/src/arm64/marvell/armada-ap80x.dtsi
+++ b/dts/upstream/src/arm64/marvell/armada-ap80x.dtsi
@@ -61,7 +61,7 @@
compatible = "simple-bus";
ranges = <0x0 0x0 0xf0000000 0x1000000>;
- smmu: iommu@5000000 {
+ smmu: iommu@100000 {
compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
reg = <0x100000 0x100000>;
dma-coherent;
diff --git a/dts/upstream/src/arm64/marvell/cn9130-crb.dtsi b/dts/upstream/src/arm64/marvell/cn9130-crb.dtsi
index 6fcc34f..5e7d6de 100644
--- a/dts/upstream/src/arm64/marvell/cn9130-crb.dtsi
+++ b/dts/upstream/src/arm64/marvell/cn9130-crb.dtsi
@@ -26,7 +26,7 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+ ap0_reg_mmc_vccq: regulator-1 {
compatible = "regulator-gpio";
regulator-name = "ap0_mmc_vccq";
regulator-min-microvolt = <1800000>;
@@ -36,7 +36,7 @@
3300000 0x0>;
};
- cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ cp0_reg_usb3_vbus1: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -45,16 +45,16 @@
gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
};
- cp0_usb3_0_phy0: cp0_usb3_phy0 {
+ cp0_usb3_0_phy0: usb-phy-1 {
compatible = "usb-nop-xceiv";
};
- cp0_usb3_0_phy1: cp0_usb3_phy1 {
+ cp0_usb3_0_phy1: usb-phy-2 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus1>;
};
- cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ cp0_reg_sd_vccq: regulator-3 {
compatible = "regulator-gpio";
regulator-name = "cp0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@
3300000 0x0>;
};
- cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ cp0_reg_sd_vcc: regulator-4 {
compatible = "regulator-fixed";
regulator-name = "cp0_sd_vcc";
regulator-min-microvolt = <3300000>;
@@ -82,7 +82,6 @@
tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
- status = "okay";
};
};
diff --git a/dts/upstream/src/arm64/marvell/cn9130-db.dtsi b/dts/upstream/src/arm64/marvell/cn9130-db.dtsi
index 6eb6a17..be56a23 100644
--- a/dts/upstream/src/arm64/marvell/cn9130-db.dtsi
+++ b/dts/upstream/src/arm64/marvell/cn9130-db.dtsi
@@ -30,7 +30,7 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+ ap0_reg_sd_vccq: regulator-1 {
compatible = "regulator-gpio";
regulator-name = "ap0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -39,7 +39,7 @@
states = <1800000 0x1 3300000 0x0>;
};
- cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+ cp0_reg_usb3_vbus0: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci0-vbus";
regulator-min-microvolt = <5000000>;
@@ -48,12 +48,12 @@
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
- cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+ cp0_usb3_0_phy0: usb-phy-1 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus0>;
};
- cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ cp0_reg_usb3_vbus1: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -62,12 +62,12 @@
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
- cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+ cp0_usb3_0_phy1: usb-phy-2 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus1>;
};
- cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ cp0_reg_sd_vccq: regulator-4 {
compatible = "regulator-gpio";
regulator-name = "cp0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@
3300000 0x0>;
};
- cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ cp0_reg_sd_vcc: regulator-5 {
compatible = "regulator-fixed";
regulator-name = "cp0_sd_vcc";
regulator-min-microvolt = <3300000>;
@@ -87,7 +87,7 @@
regulator-always-on;
};
- cp0_sfp_eth0: sfp-eth@0 {
+ cp0_sfp_eth0: sfp-eth-1 {
compatible = "sff,sfp";
i2c-bus = <&cp0_sfpp0_i2c>;
los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
@@ -311,8 +311,6 @@
reg = <0x700680 0x50>;
flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
/* On-board MUX does not allow higher frequencies */
diff --git a/dts/upstream/src/arm64/marvell/cn9131-db.dtsi b/dts/upstream/src/arm64/marvell/cn9131-db.dtsi
index ff8422f..ad7360c 100644
--- a/dts/upstream/src/arm64/marvell/cn9131-db.dtsi
+++ b/dts/upstream/src/arm64/marvell/cn9131-db.dtsi
@@ -18,7 +18,7 @@
ethernet4 = &cp1_eth1;
};
- cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+ cp1_reg_usb3_vbus0: regulator-6 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&cp1_xhci0_vbus_pins>;
@@ -29,12 +29,12 @@
gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
};
- cp1_usb3_0_phy0: cp1_usb3_phy0 {
+ cp1_usb3_0_phy0: usb-phy-3 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp1_reg_usb3_vbus0>;
};
- cp1_sfp_eth1: sfp-eth1 {
+ cp1_sfp_eth1: sfp-eth-2 {
compatible = "sff,sfp";
i2c-bus = <&cp1_i2c0>;
los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
@@ -138,8 +138,6 @@
reg = <0x700680 0x50>;
flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
/* On-board MUX does not allow higher frequencies */
diff --git a/dts/upstream/src/arm64/marvell/cn9132-db.dtsi b/dts/upstream/src/arm64/marvell/cn9132-db.dtsi
index 512a4fa..e753cfd 100644
--- a/dts/upstream/src/arm64/marvell/cn9132-db.dtsi
+++ b/dts/upstream/src/arm64/marvell/cn9132-db.dtsi
@@ -17,7 +17,7 @@
ethernet5 = &cp2_eth0;
};
- cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+ cp2_reg_usb3_vbus0: regulator-7 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci0-vbus";
regulator-min-microvolt = <5000000>;
@@ -26,12 +26,12 @@
gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
};
- cp2_usb3_0_phy0: cp2_usb3_phy0 {
+ cp2_usb3_0_phy0: usb-phy-4 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp2_reg_usb3_vbus0>;
};
- cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+ cp2_reg_usb3_vbus1: regulator-8 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -40,12 +40,12 @@
gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
};
- cp2_usb3_0_phy1: cp2_usb3_phy1 {
+ cp2_usb3_0_phy1: usb-phy-5 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp2_reg_usb3_vbus1>;
};
- cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+ cp2_reg_sd_vccq: regulator-9 {
compatible = "regulator-gpio";
regulator-name = "cp2_sd_vcc";
regulator-min-microvolt = <1800000>;
@@ -54,7 +54,7 @@
states = <1800000 0x1 3300000 0x0>;
};
- cp2_sfp_eth0: sfp-eth0 {
+ cp2_sfp_eth0: sfp-eth-3 {
compatible = "sff,sfp";
i2c-bus = <&cp2_sfpp0_i2c>;
los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
diff --git a/dts/upstream/src/arm64/mediatek/mt8516.dtsi b/dts/upstream/src/arm64/mediatek/mt8516.dtsi
index 9cbd6dd..d0b03dc 100644
--- a/dts/upstream/src/arm64/mediatek/mt8516.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8516.dtsi
@@ -165,7 +165,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
diff --git a/dts/upstream/src/arm64/microchip/sparx5.dtsi b/dts/upstream/src/arm64/microchip/sparx5.dtsi
index 24075cd..c3029e0 100644
--- a/dts/upstream/src/arm64/microchip/sparx5.dtsi
+++ b/dts/upstream/src/arm64/microchip/sparx5.dtsi
@@ -447,7 +447,7 @@
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x6 0x110102d4 0x24>;
+ reg = <0x6 0x110102f8 0x24>;
};
mdio3: mdio@61101031c {
@@ -460,7 +460,7 @@
reg = <0x6 0x1101031c 0x24>;
};
- serdes: serdes@10808000 {
+ serdes: serdes@610808000 {
compatible = "microchip,sparx5-serdes";
#phy-cells = <1>;
clocks = <&sys_clk>;
diff --git a/dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi b/dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi
index f3e226d..2c55747 100644
--- a/dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi
+++ b/dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi
@@ -15,234 +15,234 @@
leds {
compatible = "gpio-leds";
- led@0 {
+ led-0 {
label = "twr0:green";
gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
};
- led@1 {
+ led-1 {
label = "twr0:yellow";
gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
};
- led@2 {
+ led-2 {
label = "twr1:green";
gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
};
- led@3 {
+ led-3 {
label = "twr1:yellow";
gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
};
- led@4 {
+ led-4 {
label = "twr2:green";
gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
};
- led@5 {
+ led-5 {
label = "twr2:yellow";
gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
};
- led@6 {
+ led-6 {
label = "twr3:green";
gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
};
- led@7 {
+ led-7 {
label = "twr3:yellow";
gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
};
- led@8 {
+ led-8 {
label = "eth12:green";
gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@9 {
+ led-9 {
label = "eth12:yellow";
gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@10 {
+ led-10 {
label = "eth13:green";
gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@11 {
+ led-11 {
label = "eth13:yellow";
gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@12 {
+ led-12 {
label = "eth14:green";
gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@13 {
+ led-13 {
label = "eth14:yellow";
gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@14 {
+ led-14 {
label = "eth15:green";
gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@15 {
+ led-15 {
label = "eth15:yellow";
gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@16 {
+ led-16 {
label = "eth48:green";
gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@17 {
+ led-17 {
label = "eth48:yellow";
gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@18 {
+ led-18 {
label = "eth49:green";
gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@19 {
+ led-19 {
label = "eth49:yellow";
gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@20 {
+ led-20 {
label = "eth50:green";
gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@21 {
+ led-21 {
label = "eth50:yellow";
gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@22 {
+ led-22 {
label = "eth51:green";
gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@23 {
+ led-23 {
label = "eth51:yellow";
gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@24 {
+ led-24 {
label = "eth52:green";
gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@25 {
+ led-25 {
label = "eth52:yellow";
gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@26 {
+ led-26 {
label = "eth53:green";
gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@27 {
+ led-27 {
label = "eth53:yellow";
gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@28 {
+ led-28 {
label = "eth54:green";
gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@29 {
+ led-29 {
label = "eth54:yellow";
gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@30 {
+ led-30 {
label = "eth55:green";
gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@31 {
+ led-31 {
label = "eth55:yellow";
gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@32 {
+ led-32 {
label = "eth56:green";
gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@33 {
+ led-33 {
label = "eth56:yellow";
gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@34 {
+ led-34 {
label = "eth57:green";
gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@35 {
+ led-35 {
label = "eth57:yellow";
gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@36 {
+ led-36 {
label = "eth58:green";
gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@37 {
+ led-37 {
label = "eth58:yellow";
gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@38 {
+ led-38 {
label = "eth59:green";
gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@39 {
+ led-39 {
label = "eth59:yellow";
gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@40 {
+ led-40 {
label = "eth60:green";
gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@41 {
+ led-41 {
label = "eth60:yellow";
gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@42 {
+ led-42 {
label = "eth61:green";
gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@43 {
+ led-43 {
label = "eth61:yellow";
gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@44 {
+ led-44 {
label = "eth62:green";
gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@45 {
+ led-45 {
label = "eth62:yellow";
gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@46 {
+ led-46 {
label = "eth63:green";
gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@47 {
+ led-47 {
label = "eth63:yellow";
gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
@@ -274,15 +274,6 @@
&spi0 {
status = "okay";
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <8000000>;
- reg = <0>;
- };
-};
-
-&spi0 {
- status = "okay";
spi@0 {
compatible = "spi-mux";
mux-controls = <&mux>;
@@ -395,13 +386,13 @@
};
&axi {
- i2c0_imux: i2c0-imux@0 {
+ i2c0_imux: i2c-mux-0 {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
- i2c0_emux: i2c0-emux@0 {
+ i2c0_emux: i2c-mux-1 {
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
@@ -427,62 +418,62 @@
pinctrl-10 = <&i2cmux_10>;
pinctrl-11 = <&i2cmux_11>;
pinctrl-12 = <&i2cmux_pins_i>;
- i2c_sfp1: i2c_sfp1 {
+ i2c_sfp1: i2c@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp2: i2c_sfp2 {
+ i2c_sfp2: i2c@1 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp3: i2c_sfp3 {
+ i2c_sfp3: i2c@2 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp4: i2c_sfp4 {
+ i2c_sfp4: i2c@3 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp5: i2c_sfp5 {
+ i2c_sfp5: i2c@4 {
reg = <0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp6: i2c_sfp6 {
+ i2c_sfp6: i2c@5 {
reg = <0x5>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp7: i2c_sfp7 {
+ i2c_sfp7: i2c@6 {
reg = <0x6>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp8: i2c_sfp8 {
+ i2c_sfp8: i2c@7 {
reg = <0x7>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp9: i2c_sfp9 {
+ i2c_sfp9: i2c@8 {
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp10: i2c_sfp10 {
+ i2c_sfp10: i2c@9 {
reg = <0x9>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp11: i2c_sfp11 {
+ i2c_sfp11: i2c@a {
reg = <0xa>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp12: i2c_sfp12 {
+ i2c_sfp12: i2c@b {
reg = <0xb>;
#address-cells = <1>;
#size-cells = <0>;
@@ -495,42 +486,42 @@
&gpio 61 GPIO_ACTIVE_HIGH
&gpio 54 GPIO_ACTIVE_HIGH>;
idle-state = <0x8>;
- i2c_sfp13: i2c_sfp13 {
+ i2c_sfp13: i2c@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp14: i2c_sfp14 {
+ i2c_sfp14: i2c@1 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp15: i2c_sfp15 {
+ i2c_sfp15: i2c@2 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp16: i2c_sfp16 {
+ i2c_sfp16: i2c@3 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp17: i2c_sfp17 {
+ i2c_sfp17: i2c@4 {
reg = <0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp18: i2c_sfp18 {
+ i2c_sfp18: i2c@5 {
reg = <0x5>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp19: i2c_sfp19 {
+ i2c_sfp19: i2c@6 {
reg = <0x6>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp20: i2c_sfp20 {
+ i2c_sfp20: i2c@7 {
reg = <0x7>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi b/dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi
index 82ce007..af2f183 100644
--- a/dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi
+++ b/dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi
@@ -15,42 +15,42 @@
leds {
compatible = "gpio-leds";
- led@0 {
+ led-0 {
label = "eth60:yellow";
gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@1 {
+ led-1 {
label = "eth60:green";
gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@2 {
+ led-2 {
label = "eth61:yellow";
gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@3 {
+ led-3 {
label = "eth61:green";
gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@4 {
+ led-4 {
label = "eth62:yellow";
gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@5 {
+ led-5 {
label = "eth62:green";
gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@6 {
+ led-6 {
label = "eth63:yellow";
gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@7 {
+ led-7 {
label = "eth63:green";
gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>;
default-state = "off";
@@ -89,15 +89,6 @@
&spi0 {
status = "okay";
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <8000000>;
- reg = <0>;
- };
-};
-
-&spi0 {
- status = "okay";
spi@0 {
compatible = "spi-mux";
mux-controls = <&mux>;
@@ -129,7 +120,7 @@
};
&axi {
- i2c0_imux: i2c0-imux@0 {
+ i2c0_imux: i2c-mux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
@@ -146,22 +137,22 @@
pinctrl-2 = <&i2cmux_s31>;
pinctrl-3 = <&i2cmux_s32>;
pinctrl-4 = <&i2cmux_pins_i>;
- i2c_sfp1: i2c_sfp1 {
+ i2c_sfp1: i2c@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp2: i2c_sfp2 {
+ i2c_sfp2: i2c@1 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp3: i2c_sfp3 {
+ i2c_sfp3: i2c@2 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
- i2c_sfp4: i2c_sfp4 {
+ i2c_sfp4: i2c@3 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/upstream/src/arm64/nuvoton/nuvoton-npcm845-evb.dts b/dts/upstream/src/arm64/nuvoton/nuvoton-npcm845-evb.dts
index a5ab2bc..eeceb5b 100644
--- a/dts/upstream/src/arm64/nuvoton/nuvoton-npcm845-evb.dts
+++ b/dts/upstream/src/arm64/nuvoton/nuvoton-npcm845-evb.dts
@@ -16,7 +16,7 @@
stdout-path = &serial0;
};
- memory {
+ memory@0 {
reg = <0x0 0x0 0x0 0x40000000>;
};
};
diff --git a/dts/upstream/src/arm64/nvidia/tegra132-norrin.dts b/dts/upstream/src/arm64/nvidia/tegra132-norrin.dts
index 14d5885..683ac12 100644
--- a/dts/upstream/src/arm64/nvidia/tegra132-norrin.dts
+++ b/dts/upstream/src/arm64/nvidia/tegra132-norrin.dts
@@ -9,8 +9,8 @@
compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
aliases {
- rtc0 = "/i2c@7000d000/as3722@40";
- rtc1 = "/rtc@7000e000";
+ rtc0 = &as3722;
+ rtc1 = &tegra_rtc;
serial0 = &uarta;
};
diff --git a/dts/upstream/src/arm64/nvidia/tegra132.dtsi b/dts/upstream/src/arm64/nvidia/tegra132.dtsi
index 7e24a21..5bcccfe 100644
--- a/dts/upstream/src/arm64/nvidia/tegra132.dtsi
+++ b/dts/upstream/src/arm64/nvidia/tegra132.dtsi
@@ -572,7 +572,7 @@
status = "disabled";
};
- rtc@7000e000 {
+ tegra_rtc: rtc@7000e000 {
compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
reg = <0x0 0x7000e000 0x0 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/upstream/src/arm64/nvidia/tegra210-smaug.dts b/dts/upstream/src/arm64/nvidia/tegra210-smaug.dts
index 9ebb736..2e5b6b2 100644
--- a/dts/upstream/src/arm64/nvidia/tegra210-smaug.dts
+++ b/dts/upstream/src/arm64/nvidia/tegra210-smaug.dts
@@ -25,7 +25,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0xc0000000>;
};
diff --git a/dts/upstream/src/arm64/nvidia/tegra210.dtsi b/dts/upstream/src/arm64/nvidia/tegra210.dtsi
index 47f8268..882b1d1 100644
--- a/dts/upstream/src/arm64/nvidia/tegra210.dtsi
+++ b/dts/upstream/src/arm64/nvidia/tegra210.dtsi
@@ -2004,7 +2004,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a57-pmu";
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/nvidia/tegra234.dtsi b/dts/upstream/src/arm64/nvidia/tegra234.dtsi
index 78cbfdd..f2e2d8d 100644
--- a/dts/upstream/src/arm64/nvidia/tegra234.dtsi
+++ b/dts/upstream/src/arm64/nvidia/tegra234.dtsi
@@ -4406,6 +4406,22 @@
*/
status = "disabled";
};
+
+ crypto@15820000 {
+ compatible = "nvidia,tegra234-se-aes";
+ reg = <0x00 0x15820000 0x00 0x10000>;
+ clocks = <&bpmp TEGRA234_CLK_SE>;
+ iommus = <&smmu_niso1 TEGRA234_SID_SES_SE1>;
+ dma-coherent;
+ };
+
+ crypto@15840000 {
+ compatible = "nvidia,tegra234-se-hash";
+ reg = <0x00 0x15840000 0x00 0x10000>;
+ clocks = <&bpmp TEGRA234_CLK_SE>;
+ iommus = <&smmu_niso1 TEGRA234_SID_SES_SE2>;
+ dma-coherent;
+ };
};
pcie@140a0000 {
diff --git a/dts/upstream/src/arm64/qcom/apq8016-sbc.dts b/dts/upstream/src/arm64/qcom/apq8016-sbc.dts
index 9ffad7d..aba0842 100644
--- a/dts/upstream/src/arm64/qcom/apq8016-sbc.dts
+++ b/dts/upstream/src/arm64/qcom/apq8016-sbc.dts
@@ -91,7 +91,7 @@
compatible = "gpio-leds";
- led@1 {
+ led-1 {
label = "apq8016-sbc:green:user1";
function = LED_FUNCTION_HEARTBEAT;
color = <LED_COLOR_ID_GREEN>;
@@ -100,7 +100,7 @@
default-state = "off";
};
- led@2 {
+ led-2 {
label = "apq8016-sbc:green:user2";
function = LED_FUNCTION_DISK_ACTIVITY;
color = <LED_COLOR_ID_GREEN>;
@@ -109,7 +109,7 @@
default-state = "off";
};
- led@3 {
+ led-3 {
label = "apq8016-sbc:green:user3";
function = LED_FUNCTION_DISK_ACTIVITY;
color = <LED_COLOR_ID_GREEN>;
@@ -118,7 +118,7 @@
default-state = "off";
};
- led@4 {
+ led-4 {
label = "apq8016-sbc:green:user4";
color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
@@ -127,7 +127,7 @@
default-state = "off";
};
- led@5 {
+ led-5 {
label = "apq8016-sbc:yellow:wlan";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_YELLOW>;
@@ -136,7 +136,7 @@
default-state = "off";
};
- led@6 {
+ led-6 {
label = "apq8016-sbc:blue:bt";
function = LED_FUNCTION_BLUETOOTH;
color = <LED_COLOR_ID_BLUE>;
diff --git a/dts/upstream/src/arm64/qcom/ipq6018.dtsi b/dts/upstream/src/arm64/qcom/ipq6018.dtsi
index 4e29ade..17ab6c4 100644
--- a/dts/upstream/src/arm64/qcom/ipq6018.dtsi
+++ b/dts/upstream/src/arm64/qcom/ipq6018.dtsi
@@ -907,6 +907,16 @@
"axi_s_sticky";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/ipq8074-hk10.dtsi b/dts/upstream/src/arm64/qcom/ipq8074-hk10.dtsi
index 1b8379b..34e2f80 100644
--- a/dts/upstream/src/arm64/qcom/ipq8074-hk10.dtsi
+++ b/dts/upstream/src/arm64/qcom/ipq8074-hk10.dtsi
@@ -16,7 +16,7 @@
stdout-path = "serial0";
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
diff --git a/dts/upstream/src/arm64/qcom/ipq8074.dtsi b/dts/upstream/src/arm64/qcom/ipq8074.dtsi
index e5b8975..5d42de8 100644
--- a/dts/upstream/src/arm64/qcom/ipq8074.dtsi
+++ b/dts/upstream/src/arm64/qcom/ipq8074.dtsi
@@ -323,6 +323,13 @@
bias-disable;
};
+ serial_5_pins: serial5-state {
+ pins = "gpio9", "gpio16";
+ function = "blsp5_uart";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
i2c_0_pins: i2c-0-state {
pins = "gpio42", "gpio43";
function = "blsp1_i2c";
@@ -349,7 +356,7 @@
"gpio5", "gpio6", "gpio7",
"gpio8", "gpio10", "gpio11",
"gpio12", "gpio13", "gpio14",
- "gpio15", "gpio16", "gpio17";
+ "gpio15", "gpio17";
function = "qpic";
drive-strength = <8>;
bias-disable;
@@ -471,6 +478,18 @@
status = "disabled";
};
+ blsp1_uart6: serial@78b4000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b4000 0x200>;
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-0 = <&serial_5_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
blsp1_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
@@ -864,6 +883,16 @@
"ahb",
"axi_m_sticky";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0: pcie@20000000 {
@@ -929,6 +958,16 @@
"axi_m_sticky",
"axi_s_sticky";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-longcheer-l8150.dts b/dts/upstream/src/arm64/qcom/msm8916-longcheer-l8150.dts
index 3a3e794..7f0c2c1 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-longcheer-l8150.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-longcheer-l8150.dts
@@ -12,7 +12,7 @@
/ {
model = "Longcheer L8150";
- compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
+ compatible = "longcheer,l8150", "qcom,msm8916";
chassis-type = "handset";
aliases {
diff --git a/dts/upstream/src/arm64/qcom/msm8916-mtp.dts b/dts/upstream/src/arm64/qcom/msm8916-mtp.dts
index ac527a3..c11a845 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-mtp.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-mtp.dts
@@ -9,7 +9,7 @@
/ {
model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
- compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
+ compatible = "qcom,msm8916-mtp", "qcom,msm8916";
chassis-type = "handset";
aliases {
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
index 2937495..4bbbee8 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
@@ -128,6 +128,12 @@
pinctrl-names = "default";
pinctrl-0 = <&muic_int_default>;
+
+ usb_con: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
index 3c49dac..c50f81a 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
@@ -23,6 +23,12 @@
pinctrl-names = "default";
pinctrl-0 = <&muic_int_default>;
+
+ usb_con: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
index c2800ad..5e933fb 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -26,6 +26,30 @@
};
};
+ clk_pwm_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&clk_pwm 0 100000>;
+
+ enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <128>;
+
+ pinctrl-0 = <&backlight_en_default>;
+ pinctrl-names = "default";
+ };
+
+ clk_pwm: pwm {
+ compatible = "clk-pwm";
+ #pwm-cells = <2>;
+
+ clocks = <&gcc GCC_GP2_CLK>;
+
+ pinctrl-0 = <&backlight_pwm_default>;
+ pinctrl-names = "default";
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -66,6 +90,19 @@
pinctrl-0 = <&motor_en_default>;
pinctrl-names = "default";
};
+
+ reg_vdd_tsp_a: regulator-vdd-tsp-a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_tsp_a";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&tsp_en_default>;
+ pinctrl-names = "default";
+ };
};
&blsp_i2c1 {
@@ -94,6 +131,26 @@
};
};
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen: touchscreen@20 {
+ compatible = "zinitix,bt541";
+ reg = <0x20>;
+
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-size-x = <540>;
+ touchscreen-size-y = <960>;
+
+ vcca-supply = <&reg_vdd_tsp_a>;
+ vdd-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&tsp_int_default>;
+ pinctrl-names = "default";
+ };
+};
+
&blsp_uart2 {
status = "okay";
};
@@ -166,6 +223,18 @@
};
&tlmm {
+ backlight_en_default: backlight-en-default-state {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ backlight_pwm_default: backlight-pwm-default-state {
+ pins = "gpio50";
+ function = "gcc_gp2_clk_a";
+ };
+
fg_alert_default: fg-alert-default-state {
pins = "gpio121";
function = "gpio";
@@ -200,4 +269,18 @@
drive-strength = <2>;
bias-disable;
};
+
+ tsp_en_default: tsp-en-default-state {
+ pins = "gpio73";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_int_default: tsp-int-default-state {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
index 4284377..b438fa8 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
@@ -5,6 +5,9 @@
/* SM5504 MUIC instead of SM5502 */
/delete-node/ &muic;
+/* Touchscreen varies depending on model variant */
+/delete-node/ &touchscreen;
+
&blsp_i2c1 {
muic: extcon@14 {
compatible = "siliconmitus,sm5504-muic";
@@ -14,3 +17,12 @@
pinctrl-names = "default";
};
};
+
+/* On rossa backlight is controlled with MIPI DCS commands */
+&clk_pwm {
+ status = "disabled";
+};
+
+&clk_pwm_backlight {
+ status = "disabled";
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts b/dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts
index aa6c394..0c599e7 100644
--- a/dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts
+++ b/dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts
@@ -286,6 +286,12 @@
pinctrl-0 = <&muic_int_default>;
pinctrl-names = "default";
+
+ usb_con: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/msm8953.dtsi b/dts/upstream/src/arm64/qcom/msm8953.dtsi
index f1011bb..5d818fe 100644
--- a/dts/upstream/src/arm64/qcom/msm8953.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8953.dtsi
@@ -1323,6 +1323,20 @@
snps,hird-threshold = /bits/ 8 <0x00>;
maximum-speed = "high-speed";
+
+ usb-role-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dwc3_hs: endpoint {
+ };
+ };
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/msm8996.dtsi b/dts/upstream/src/arm64/qcom/msm8996.dtsi
index 1601e46..8d2cb6f 100644
--- a/dts/upstream/src/arm64/qcom/msm8996.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8996.dtsi
@@ -1929,6 +1929,16 @@
"cfg",
"bus_master",
"bus_slave";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1: pcie@608000 {
@@ -1982,6 +1992,16 @@
"cfg",
"bus_master",
"bus_slave";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie2: pcie@610000 {
@@ -2032,6 +2052,16 @@
"cfg",
"bus_master",
"bus_slave";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi b/dts/upstream/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
index 876c692..d8cc0d7 100644
--- a/dts/upstream/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -98,30 +98,35 @@
gpio-keys {
compatible = "gpio-keys";
label = "Side buttons";
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
pinctrl-names = "default";
- pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
- button-vol-down {
- label = "Volume Down";
- gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_KEY>;
- linux,code = <KEY_VOLUMEDOWN>;
- wakeup-source;
+ button-camera-focus {
+ label = "Camera Focus";
+ gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA_FOCUS>;
debounce-interval = <15>;
};
button-camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_KEY>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
};
- button-camera-focus {
- label = "Camera Focus";
- gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_KEY>;
- linux,code = <KEY_CAMERA_FOCUS>;
+ button-vol-down {
+ label = "Volume Down";
+ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button-vol-up {
+ label = "Volume Up";
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
debounce-interval = <15>;
};
};
@@ -345,6 +350,14 @@
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
+ vol_up_n: vol-up-n-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-pull-up;
+ input-enable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+
focus_n: focus-n-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -405,9 +418,33 @@
};
};
-&pm8998_resin {
- linux,code = <KEY_VOLUMEUP>;
+&pmi8998_lpg {
+ qcom,power-source = <1>;
+
status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@4 {
+ reg = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
};
&qusb2phy {
diff --git a/dts/upstream/src/arm64/qcom/msm8998.dtsi b/dts/upstream/src/arm64/qcom/msm8998.dtsi
index 4dfe2d0..d795b2b 100644
--- a/dts/upstream/src/arm64/qcom/msm8998.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8998.dtsi
@@ -972,6 +972,16 @@
power-domains = <&gcc PCIE_0_GDSC>;
iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie_phy: phy@1c06000 {
diff --git a/dts/upstream/src/arm64/qcom/pm6150.dtsi b/dts/upstream/src/arm64/qcom/pm6150.dtsi
index 11158c2..6de6ed5 100644
--- a/dts/upstream/src/arm64/qcom/pm6150.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm6150.dtsi
@@ -64,15 +64,15 @@
};
pm6150_vbus: usb-vbus-regulator@1100 {
- compatible = "qcom,pm6150-vbus-reg,
- qcom,pm8150b-vbus-reg";
+ compatible = "qcom,pm6150-vbus-reg",
+ "qcom,pm8150b-vbus-reg";
reg = <0x1100>;
status = "disabled";
};
pm6150_typec: typec@1500 {
- compatible = "qcom,pm6150-typec,
- qcom,pm8150b-typec";
+ compatible = "qcom,pm6150-typec",
+ "qcom,pm8150b-typec";
reg = <0x1500>, <0x1700>;
interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
<0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
diff --git a/dts/upstream/src/arm64/qcom/pm6150l.dtsi b/dts/upstream/src/arm64/qcom/pm6150l.dtsi
index d13a1ab..0fce452 100644
--- a/dts/upstream/src/arm64/qcom/pm6150l.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm6150l.dtsi
@@ -118,6 +118,16 @@
status = "disabled";
};
+ pm6150l_lpg: pwm {
+ compatible = "qcom,pm6150l-lpg", "qcom,pm8150l-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
+
pm6150l_wled: leds@d800 {
compatible = "qcom,pm6150l-wled";
reg = <0xd800>, <0xd900>;
diff --git a/dts/upstream/src/arm64/qcom/qcm2290.dtsi b/dts/upstream/src/arm64/qcom/qcm2290.dtsi
index 89beac8..106110a 100644
--- a/dts/upstream/src/arm64/qcom/qcm2290.dtsi
+++ b/dts/upstream/src/arm64/qcom/qcm2290.dtsi
@@ -165,7 +165,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -694,10 +694,31 @@
clock-output-names = "usb3_phy_pipe_clk_src";
#phy-cells = <0>;
+ orientation-switch;
qcom,tcsr-reg = <&tcsr_regs 0xb244>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_dwc3_ss>;
+ };
+ };
+ };
};
system_noc: interconnect@1880000 {
@@ -1380,6 +1401,27 @@
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
dr_mode = "otg";
+ usb-role-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+ };
+ };
+ };
};
};
@@ -1858,7 +1900,7 @@
compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
reg = <0x0 0x0f521000 0x0 0x1000>;
reg-names = "freq-domain0";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&lmh_cluster 0>;
interrupt-names = "dcvsh-irq-0";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
@@ -1866,6 +1908,18 @@
#freq-domain-cells = <1>;
#clock-cells = <1>;
};
+
+ lmh_cluster: lmh@f550800 {
+ compatible = "qcom,qcm2290-lmh", "qcom,sm8150-lmh";
+ reg = <0x0 0x0f550800 0x0 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ cpus = <&CPU0>;
+ qcom,lmh-temp-arm-millicelsius = <65000>;
+ qcom,lmh-temp-low-millicelsius = <94500>;
+ qcom,lmh-temp-high-millicelsius = <95000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
thermal-zones {
diff --git a/dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts b/dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts
index 4ff9fc2..f343270 100644
--- a/dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts
+++ b/dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts
@@ -77,6 +77,8 @@
#address-cells = <1>;
#size-cells = <0>;
+ orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
diff --git a/dts/upstream/src/arm64/qcom/qcm6490-idp.dts b/dts/upstream/src/arm64/qcom/qcm6490-idp.dts
index e4bfad5..47ca2d0 100644
--- a/dts/upstream/src/arm64/qcom/qcm6490-idp.dts
+++ b/dts/upstream/src/arm64/qcom/qcm6490-idp.dts
@@ -9,7 +9,9 @@
#define PM7250B_SID 8
#define PM7250B_SID1 9
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc7280.dtsi"
#include "pm7250b.dtsi"
@@ -35,10 +37,45 @@
serial0 = &uart5;
};
+ pm8350c_pwm_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8350c_pwm 3 65535>;
+ enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pmic_lcd_bl_en>;
+ pinctrl-names = "default";
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
+ lcd_disp_bias: regulator-lcd-disp-bias {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_disp_bias";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ gpio = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-0 = <&lcd_disp_bias_en>;
+ pinctrl-names = "default";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_vol_up_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume_up";
+ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+ };
+
reserved-memory {
xbl_mem: xbl@80700000 {
reg = <0x0 0x80700000 0x0 0x100000>;
@@ -158,129 +195,151 @@
vdd-l14-l16-supply = <&vreg_s8b_1p272>;
vreg_s1b_1p872: smps1 {
+ regulator-name = "vreg_s1b_1p872";
regulator-min-microvolt = <1840000>;
regulator-max-microvolt = <2040000>;
};
vreg_s2b_0p876: smps2 {
+ regulator-name = "vreg_s2b_0p876";
regulator-min-microvolt = <570070>;
regulator-max-microvolt = <1050000>;
};
vreg_s7b_0p972: smps7 {
+ regulator-name = "vreg_s7b_0p972";
regulator-min-microvolt = <535000>;
regulator-max-microvolt = <1120000>;
};
vreg_s8b_1p272: smps8 {
+ regulator-name = "vreg_s8b_1p272";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1500000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
};
vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <925000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p072: ldo2 {
+ regulator-name = "vreg_l2b_3p072";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3b_0p504: ldo3 {
+ regulator-name = "vreg_l3b_0p504";
regulator-min-microvolt = <312000>;
regulator-max-microvolt = <910000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4b_0p752: ldo4 {
+ regulator-name = "vreg_l4b_0p752";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <820000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
reg_l5b_0p752: ldo5 {
+ regulator-name = "reg_l5b_0p752";
regulator-min-microvolt = <552000>;
regulator-max-microvolt = <832000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1260000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p952: ldo7 {
+ regulator-name = "vreg_l7b_2p952";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_0p904: ldo8 {
+ regulator-name = "vreg_l8b_0p904";
regulator-min-microvolt = <870000>;
regulator-max-microvolt = <970000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b_1p504: ldo11 {
+ regulator-name = "vreg_l11b_1p504";
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_0p751: ldo12 {
+ regulator-name = "vreg_l12b_0p751";
regulator-min-microvolt = <751000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_0p53: ldo13 {
+ regulator-name = "vreg_l13b_0p53";
regulator-min-microvolt = <530000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_1p08: ldo14 {
+ regulator-name = "vreg_l14b_1p08";
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_0p765: ldo15 {
+ regulator-name = "vreg_l15b_0p765";
regulator-min-microvolt = <765000>;
regulator-max-microvolt = <1020000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b_1p1: ldo16 {
+ regulator-name = "vreg_l16b_1p1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_1p7: ldo17 {
+ regulator-name = "vreg_l17b_1p7";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18b_1p8: ldo18 {
+ regulator-name = "vreg_l18b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l19b_1p8: ldo19 {
+ regulator-name = "vreg_l19b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -312,116 +371,217 @@
vdd-bob-supply = <&vph_pwr>;
vreg_s1c_2p19: smps1 {
+ regulator-name = "vreg_s1c_2p19";
regulator-min-microvolt = <2190000>;
regulator-max-microvolt = <2210000>;
};
vreg_s2c_0p752: smps2 {
+ regulator-name = "vreg_s2c_0p752";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <800000>;
};
vreg_s5c_0p752: smps5 {
+ regulator-name = "vreg_s5c_0p752";
regulator-min-microvolt = <465000>;
regulator-max-microvolt = <1050000>;
};
vreg_s7c_0p752: smps7 {
+ regulator-name = "vreg_s7c_0p752";
regulator-min-microvolt = <465000>;
regulator-max-microvolt = <800000>;
};
vreg_s9c_1p084: smps9 {
+ regulator-name = "vreg_s9c_1p084";
regulator-min-microvolt = <1010000>;
regulator-max-microvolt = <1170000>;
};
vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1980000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p62: ldo2 {
+ regulator-name = "vreg_l2c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <1980000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_2p8: ldo3 {
+ regulator-name = "vreg_l3c_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3540000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p62: ldo4 {
+ regulator-name = "vreg_l4c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p62: ldo5 {
+ regulator-name = "vreg_l5c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
+ regulator-name = "vreg_l7c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p62: ldo8 {
+ regulator-name = "vreg_l8c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <35440000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_0p88: ldo10 {
+ regulator-name = "vreg_l10c_0p88";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1050000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_2p8: ldo11 {
+ regulator-name = "vreg_l11c_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12c_1p65: ldo12 {
+ regulator-name = "vreg_l12c_1p65";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c_2p7: ldo13 {
+ regulator-name = "vreg_l13c_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob_3p296: bob {
+ regulator-name = "vreg_bob_3p296";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
};
};
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi {
+ vdda-supply = <&vreg_l6b_1p2>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "novatek,nt36672e";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+ vddi-supply = <&vreg_l8c_1p62>;
+ avdd-supply = <&lcd_disp_bias>;
+ avee-supply = <&lcd_disp_bias>;
+
+ backlight = <&pm8350c_pwm_backlight>;
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi_phy {
+ vdds-supply = <&vreg_l10c_0p88>;
+ status = "okay";
+};
+
+&pm7250b_gpios {
+ lcd_disp_bias_en: lcd-disp-bias-en-state {
+ pins = "gpio2";
+ function = "func1";
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ input-disable;
+ output-enable;
+ power-source = <0>;
+ };
+};
+
+&pm8350c_gpios {
+ pmic_lcd_bl_en: pmic-lcd-bl-en-state {
+ pins = "gpio7";
+ function = "normal";
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ output-low;
+ power-source = <0>;
+ };
+
+ pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state {
+ pins = "gpio8";
+ function = "func1";
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ output-low;
+ power-source = <0>;
+ };
+};
+
+&pm7325_gpios {
+ key_vol_up_default: key-vol-up-state {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
&pm8350c_pwm {
+ pinctrl-0 = <&pmic_lcd_bl_pwm>;
+ pinctrl-names = "default";
status = "okay";
multi-led {
@@ -448,10 +608,39 @@
};
};
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/qcm6490/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcm6490/cdsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/qcm6490/modem.mbn";
+ status = "okay";
+};
+
+&remoteproc_wpss {
+ firmware-name = "qcom/qcm6490/wpss.mbn";
+ status = "okay";
+};
+
&sdhc_1 {
non-removable;
no-sd;
diff --git a/dts/upstream/src/arm64/qcom/qcs404-evb.dtsi b/dts/upstream/src/arm64/qcom/qcs404-evb.dtsi
index 1065540..a22b450 100644
--- a/dts/upstream/src/arm64/qcom/qcs404-evb.dtsi
+++ b/dts/upstream/src/arm64/qcom/qcs404-evb.dtsi
@@ -62,7 +62,7 @@
vddrf-supply = <&vreg_l1_1p3>;
vddch0-supply = <&vdd_ch0_3p3>;
- local-bd-address = [ 02 00 00 00 5a ad ];
+ local-bd-address = [ 00 00 00 00 00 00 ];
max-speed = <3200000>;
};
diff --git a/dts/upstream/src/arm64/qcom/qcs404.dtsi b/dts/upstream/src/arm64/qcom/qcs404.dtsi
index a05d023..ac451f3 100644
--- a/dts/upstream/src/arm64/qcom/qcs404.dtsi
+++ b/dts/upstream/src/arm64/qcom/qcs404.dtsi
@@ -1516,6 +1516,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts b/dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts
index 97824c7..a085ff5 100644
--- a/dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts
+++ b/dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts
@@ -17,7 +17,6 @@
#include "pmk8350.dtsi"
/delete-node/ &ipa_fw_mem;
-/delete-node/ &remoteproc_mpss;
/delete-node/ &rmtfs_mem;
/delete-node/ &adsp_mem;
/delete-node/ &cdsp_mem;
@@ -39,6 +38,20 @@
stdout-path = "serial0:115200n8";
};
+ dp-connector {
+ compatible = "dp-connector";
+ label = "DP";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp_connector_in: endpoint {
+ remote-endpoint = <&mdss_edp_out>;
+ };
+ };
+ };
+
reserved-memory {
xbl_mem: xbl@80700000 {
reg = <0x0 0x80700000 0x0 0x100000>;
@@ -121,6 +134,49 @@
};
};
+ pmic-glink {
+ compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&redriver_usb_con_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu_in: endpoint {
+ remote-endpoint = <&redriver_usb_con_sbu>;
+ };
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -153,129 +209,154 @@
vdd-l14-l16-supply = <&vreg_s8b_1p272>;
vreg_s1b_1p872: smps1 {
+ regulator-name = "vreg_s1b_1p872";
regulator-min-microvolt = <1840000>;
regulator-max-microvolt = <2040000>;
};
vreg_s2b_0p876: smps2 {
+ regulator-name = "vreg_s2b_0p876";
regulator-min-microvolt = <570070>;
regulator-max-microvolt = <1050000>;
};
vreg_s7b_0p972: smps7 {
+ regulator-name = "vreg_s7b_0p972";
regulator-min-microvolt = <535000>;
regulator-max-microvolt = <1120000>;
};
vreg_s8b_1p272: smps8 {
+ regulator-name = "vreg_s8b_1p272";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1500000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
};
vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <925000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p072: ldo2 {
+ regulator-name = "vreg_l2b_3p072";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3b_0p504: ldo3 {
+ regulator-name = "vreg_l3b_0p504";
regulator-min-microvolt = <312000>;
regulator-max-microvolt = <910000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4b_0p752: ldo4 {
+ regulator-name = "vreg_l4b_0p752";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <820000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
reg_l5b_0p752: ldo5 {
+ regulator-name = "reg_l5b_0p752";
regulator-min-microvolt = <552000>;
regulator-max-microvolt = <832000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1260000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p952: ldo7 {
- regulator-min-microvolt = <2400000>;
- regulator-max-microvolt = <3544000>;
+ regulator-name = "vreg_l7b_2p952";
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <2952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_0p904: ldo8 {
+ regulator-name = "vreg_l8b_0p904";
regulator-min-microvolt = <870000>;
regulator-max-microvolt = <970000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1304000>;
+ regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b_1p504: ldo11 {
+ regulator-name = "vreg_l11b_1p504";
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_0p751: ldo12 {
+ regulator-name = "vreg_l12b_0p751";
regulator-min-microvolt = <751000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_0p53: ldo13 {
+ regulator-name = "vreg_l13b_0p53";
regulator-min-microvolt = <530000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_1p08: ldo14 {
+ regulator-name = "vreg_l14b_1p08";
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_0p765: ldo15 {
+ regulator-name = "vreg_l15b_0p765";
regulator-min-microvolt = <765000>;
regulator-max-microvolt = <1020000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b_1p1: ldo16 {
+ regulator-name = "vreg_l16b_1p1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_1p7: ldo17 {
+ regulator-name = "vreg_l17b_1p7";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18b_1p8: ldo18 {
+ regulator-name = "vreg_l18b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l19b_1p8: ldo19 {
+ regulator-name = "vreg_l19b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -304,109 +385,128 @@
vdd-bob-supply = <&vph_pwr>;
vreg_s1c_2p19: smps1 {
+ regulator-name = "vreg_s1c_2p19";
regulator-min-microvolt = <2190000>;
regulator-max-microvolt = <2210000>;
};
vreg_s2c_0p752: smps2 {
+ regulator-name = "vreg_s2c_0p752";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <800000>;
};
vreg_s5c_0p752: smps5 {
+ regulator-name = "vreg_s5c_0p752";
regulator-min-microvolt = <465000>;
regulator-max-microvolt = <1050000>;
};
vreg_s7c_0p752: smps7 {
+ regulator-name = "vreg_s7c_0p752";
regulator-min-microvolt = <465000>;
regulator-max-microvolt = <800000>;
};
vreg_s9c_1p084: smps9 {
+ regulator-name = "vreg_s9c_1p084";
regulator-min-microvolt = <1010000>;
regulator-max-microvolt = <1170000>;
};
vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1980000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p62: ldo2 {
+ regulator-name = "vreg_l2c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <1980000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_2p8: ldo3 {
+ regulator-name = "vreg_l3c_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3540000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p62: ldo4 {
+ regulator-name = "vreg_l4c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p62: ldo5 {
+ regulator-name = "vreg_l5c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
+ regulator-name = "vreg_l7c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p62: ldo8 {
+ regulator-name = "vreg_l8c_1p62";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <35440000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_0p88: ldo10 {
+ regulator-name = "vreg_l10c_0p88";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1050000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_2p8: ldo11 {
+ regulator-name = "vreg_l11c_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12c_1p65: ldo12 {
+ regulator-name = "vreg_l12c_1p65";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c_2p7: ldo13 {
+ regulator-name = "vreg_l13c_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob_3p296: bob {
+ regulator-name = "vreg_bob_3p296";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
};
@@ -430,10 +530,102 @@
<GCC_WPSS_RSCP_CLK>;
};
+&i2c1 {
+ status = "okay";
+
+ typec-mux@1c {
+ compatible = "onnn,nb7vpq904m";
+ reg = <0x1c>;
+
+ vcc-supply = <&vreg_l18b_1p8>;
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ redriver_usb_con_ss: endpoint {
+ remote-endpoint = <&pmic_glink_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ redriver_phy_con_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ redriver_usb_con_sbu: endpoint {
+ remote-endpoint = <&pmic_glink_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp {
+ status = "okay";
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
+&mdss_edp {
+ status = "okay";
+};
+
+&mdss_edp_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&dp_connector_in>;
+};
+
+&mdss_edp_phy {
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs6490/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs6490/cdsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/qcs6490/modem.mdt";
+ status = "okay";
+};
+
+&remoteproc_wpss {
+ firmware-name = "qcom/qcs6490/wpss.mbn";
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
@@ -449,7 +641,16 @@
};
&usb_1_dwc3 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
&usb_1_hsphy {
@@ -464,9 +665,49 @@
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l1b_0p912>;
+ orientation-switch;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&redriver_phy_con_ss>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&usb_dp_qmpphy_dp_in {
+ remote-endpoint = <&mdss_dp_out>;
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l7b_2p952>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <900000>;
+ vccq2-supply = <&vreg_l9b_1p2>;
+ vccq2-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
status = "okay";
};
&wifi {
memory-region = <&wlan_fw_mem>;
};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&edp_hot_plug_det {
+ function = "gpio";
+ bias-disable;
+};
diff --git a/dts/upstream/src/arm64/qcom/qdu1000.dtsi b/dts/upstream/src/arm64/qcom/qdu1000.dtsi
index 832f472..f90f03f 100644
--- a/dts/upstream/src/arm64/qcom/qdu1000.dtsi
+++ b/dts/upstream/src/arm64/qcom/qdu1000.dtsi
@@ -177,7 +177,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -1459,9 +1459,23 @@
system-cache-controller@19200000 {
compatible = "qcom,qdu1000-llcc";
- reg = <0 0x19200000 0 0xd80000>,
+ reg = <0 0x19200000 0 0x80000>,
+ <0 0x19300000 0 0x80000>,
+ <0 0x19600000 0 0x80000>,
+ <0 0x19700000 0 0x80000>,
+ <0 0x19a00000 0 0x80000>,
+ <0 0x19b00000 0 0x80000>,
+ <0 0x19e00000 0 0x80000>,
+ <0 0x19f00000 0 0x80000>,
<0 0x1a200000 0 0x80000>;
reg-names = "llcc0_base",
+ "llcc1_base",
+ "llcc2_base",
+ "llcc3_base",
+ "llcc4_base",
+ "llcc5_base",
+ "llcc6_base",
+ "llcc7_base",
"llcc_broadcast_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/dts/upstream/src/arm64/qcom/qrb2210-rb1.dts b/dts/upstream/src/arm64/qcom/qrb2210-rb1.dts
index 6e9dd03..bb519142 100644
--- a/dts/upstream/src/arm64/qcom/qrb2210-rb1.dts
+++ b/dts/upstream/src/arm64/qcom/qrb2210-rb1.dts
@@ -262,6 +262,46 @@
status = "okay";
};
+&pm4125_typec {
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "dual";
+ data-role = "dual";
+ self-powered;
+
+ typec-power-opmode = "default";
+ pd-disable;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pm4125_hs_in: endpoint {
+ remote-endpoint = <&usb_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pm4125_ss_in: endpoint {
+ remote-endpoint = <&usb_qmpphy_out>;
+ };
+ };
+ };
+ };
+};
+
+&pm4125_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <500000>;
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -535,14 +575,8 @@
status = "okay";
};
-&usb_qmpphy {
- vdda-phy-supply = <&pm4125_l12>;
- vdda-pll-supply = <&pm4125_l13>;
- status = "okay";
-};
-
-&usb_dwc3 {
- dr_mode = "host";
+&usb_dwc3_hs {
+ remote-endpoint = <&pm4125_hs_in>;
};
&usb_hsphy {
@@ -552,12 +586,23 @@
status = "okay";
};
+&usb_qmpphy {
+ vdda-phy-supply = <&pm4125_l12>;
+ vdda-pll-supply = <&pm4125_l13>;
+ status = "okay";
+};
+
+&usb_qmpphy_out {
+ remote-endpoint = <&pm4125_ss_in>;
+};
+
&wifi {
vdd-0.8-cx-mx-supply = <&pm4125_l7>;
vdd-1.8-xo-supply = <&pm4125_l13>;
vdd-1.3-rfa-supply = <&pm4125_l10>;
vdd-3.3-ch0-supply = <&pm4125_l22>;
qcom,ath10k-calibration-variant = "Thundercomm_RB1";
+ firmware-name = "qcm2290";
status = "okay";
};
diff --git a/dts/upstream/src/arm64/qcom/qrb4210-rb2.dts b/dts/upstream/src/arm64/qcom/qrb4210-rb2.dts
index 696d6d4..2c39bb1 100644
--- a/dts/upstream/src/arm64/qcom/qrb4210-rb2.dts
+++ b/dts/upstream/src/arm64/qcom/qrb4210-rb2.dts
@@ -678,6 +678,7 @@
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+ firmware-name = "qrb4210";
status = "okay";
};
diff --git a/dts/upstream/src/arm64/qcom/sa8155p-adp.dts b/dts/upstream/src/arm64/qcom/sa8155p-adp.dts
index b2cf2c9..9e9c7f8 100644
--- a/dts/upstream/src/arm64/qcom/sa8155p-adp.dts
+++ b/dts/upstream/src/arm64/qcom/sa8155p-adp.dts
@@ -283,7 +283,7 @@
vreg_l13c_2p96: ldo13 {
regulator-name = "vreg_l13c_2p96";
- regulator-min-microvolt = <2504000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
diff --git a/dts/upstream/src/arm64/qcom/sa8775p.dtsi b/dts/upstream/src/arm64/qcom/sa8775p.dtsi
index 231cea1..1b3dc0e 100644
--- a/dts/upstream/src/arm64/qcom/sa8775p.dtsi
+++ b/dts/upstream/src/arm64/qcom/sa8775p.dtsi
@@ -3605,7 +3605,7 @@
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
pcie0: pcie@1c00000 {
@@ -3677,6 +3677,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c04000 {
@@ -3777,6 +3787,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c14000 {
diff --git a/dts/upstream/src/arm64/qcom/sc7180-acer-aspire1.dts b/dts/upstream/src/arm64/qcom/sc7180-acer-aspire1.dts
index 5afcb82..3f0d3e3 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-acer-aspire1.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-acer-aspire1.dts
@@ -255,7 +255,25 @@
clock-frequency = <400000>;
status = "okay";
- /* embedded-controller@76 */
+ embedded-controller@76 {
+ compatible = "acer,aspire1-ec";
+ reg = <0x76>;
+
+ interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&ec_int_default>;
+ pinctrl-names = "default";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ port {
+ ec_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp_out>;
+ };
+ };
+ };
+ };
};
&i2c4 {
@@ -419,6 +437,19 @@
status = "okay";
};
+&mdss_dp {
+ data-lanes = <0 1>;
+
+ vdda-1p2-supply = <&vreg_l3c_1p2>;
+ vdda-0p9-supply = <&vreg_l4a_0p8>;
+
+ status = "okay";
+};
+
+&mdss_dp_out {
+ remote-endpoint = <&ec_dp_in>;
+};
+
&mdss_dsi0 {
vdda-supply = <&vreg_l3c_1p2>;
status = "okay";
@@ -857,6 +888,13 @@
bias-disable;
};
+ ec_int_default: ec-int-default-state {
+ pins = "gpio30";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
edp_bridge_irq_default: edp-bridge-irq-default-state {
pins = "gpio11";
function = "gpio";
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi
index 5260c63..8513be2 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi
@@ -1167,6 +1167,7 @@ ap_spi_fp: &spi10 {
};
&pm6150l_gpios {
+ status = "disabled"; /* No GPIOs are consumed or configured */
gpio-line-names = "AP_SUSPEND",
"",
"",
diff --git a/dts/upstream/src/arm64/qcom/sc7180.dtsi b/dts/upstream/src/arm64/qcom/sc7180.dtsi
index 2b481e2..4774a85 100644
--- a/dts/upstream/src/arm64/qcom/sc7180.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180.dtsi
@@ -1585,9 +1585,12 @@
compatible = "qcom,sc7180-qmp-ufs-phy",
"qcom,sm7150-qmp-ufs-phy";
reg = <0 0x01d87000 0 0x1000>;
- clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
- clock-names = "ref", "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&gcc GCC_UFS_MEM_CLKREF_CLK>;
+ clock-names = "ref",
+ "ref_aux",
+ "qref";
power-domains = <&gcc UFS_PHY_GDSC>;
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
@@ -2309,6 +2312,7 @@
compatible = "qcom,sc7180-dcc", "qcom,dcc";
reg = <0x0 0x010a2000 0x0 0x1000>,
<0x0 0x010ae000 0x0 0x2000>;
+ status = "disabled";
};
stm@6002000 {
diff --git a/dts/upstream/src/arm64/qcom/sc7280.dtsi b/dts/upstream/src/arm64/qcom/sc7280.dtsi
index 41f51d3..fc9ec36 100644
--- a/dts/upstream/src/arm64/qcom/sc7280.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7280.dtsi
@@ -2273,6 +2273,16 @@
<0x100 &apps_smmu 0x1c81 0x1>;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0e000 {
@@ -2352,6 +2362,8 @@
<0 0>,
<0 0>,
<0 0>;
+ qcom,ice = <&ice>;
+
status = "disabled";
};
@@ -2374,6 +2386,13 @@
status = "disabled";
};
+ ice: crypto@1d88000 {
+ compatible = "qcom,sc7280-inline-crypto-engine",
+ "qcom,inline-crypto-engine";
+ reg = <0 0x01d88000 0 0x8000>;
+ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ };
+
cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
reg = <0x0 0x01dc4000 0x0 0x28000>;
@@ -4458,6 +4477,11 @@
opp-hz = /bits/ 64 <506666667>;
required-opps = <&rpmhpd_opp_nom>;
};
+
+ opp-608000000 {
+ opp-hz = /bits/ 64 <608000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
};
};
diff --git a/dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts b/dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
index 0c22f3e..6af9911 100644
--- a/dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
@@ -51,6 +51,8 @@
#address-cells = <1>;
#size-cells = <0>;
+ orientation-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>,
+ <&tlmm 58 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
@@ -329,12 +331,18 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
};
vreg_l10e_2p9: ldo10 {
regulator-min-microvolt = <2904000>;
regulator-max-microvolt = <2904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
};
vreg_l16e_3p0: ldo16 {
@@ -350,49 +358,58 @@
zap-shader {
memory-region = <&gpu_mem>;
- firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+ firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn";
};
};
&i2c1 {
clock-frequency = <100000>;
- pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+ pinctrl-0 = <&i2c1_active>;
pinctrl-names = "default";
status = "okay";
- hid@10 {
+ touchscreen@10 {
compatible = "hid-over-i2c";
reg = <0x10>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&ts_int_default>;
+ pinctrl-names = "default";
};
};
&i2c7 {
- clock-frequency = <100000>;
+ clock-frequency = <1000000>;
- pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+ pinctrl-0 = <&i2c7_active>;
pinctrl-names = "default";
status = "okay";
- hid@5 {
+ keyboard@5 {
compatible = "hid-over-i2c";
reg = <0x5>;
hid-descr-addr = <0x20>;
interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&kb_int_default>;
+ pinctrl-names = "default";
};
- hid@2c {
+ touchpad@2c {
compatible = "hid-over-i2c";
reg = <0x2c>;
hid-descr-addr = <0x20>;
interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&tp_int_default>;
+ pinctrl-names = "default";
};
};
@@ -669,14 +686,6 @@
drive-strength = <2>;
};
- i2c1_hid_active: i2c1-hid-active-state {
- pins = "gpio122";
- function = "gpio";
-
- bias-pull-up;
- drive-strength = <2>;
- };
-
i2c7_active: i2c7-active-state {
pins = "gpio98", "gpio99";
function = "qup7";
@@ -685,8 +694,8 @@
drive-strength = <2>;
};
- i2c7_hid_active: i2c7-hid-active-state {
- pins = "gpio37", "gpio24";
+ kb_int_default: kb-int-default-state {
+ pins = "gpio37";
function = "gpio";
bias-pull-up;
@@ -718,6 +727,22 @@
};
};
+ tp_int_default: tp-int-default-state {
+ pins = "gpio24";
+ function = "gpio";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ ts_int_default: ts-int-default-state {
+ pins = "gpio122";
+ function = "gpio";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
usbprim_sbu_default: usbprim-sbu-state {
oe-n-pins {
pins = "gpio152";
diff --git a/dts/upstream/src/arm64/qcom/sc8180x.dtsi b/dts/upstream/src/arm64/qcom/sc8180x.dtsi
index 053f786..581a70c 100644
--- a/dts/upstream/src/arm64/qcom/sc8180x.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc8180x.dtsi
@@ -1777,6 +1777,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -1888,6 +1898,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie3_phy: phy@1c0c000 {
@@ -2000,6 +2020,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c16000 {
@@ -2112,6 +2142,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie2_phy: phy@1c1c000 {
@@ -2225,7 +2265,6 @@
gpu: gpu@2c00000 {
compatible = "qcom,adreno-680.1", "qcom,adreno";
- #stream-id-cells = <16>;
reg = <0 0x02c00000 0 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
@@ -2608,11 +2647,14 @@
system-cache-controller@9200000 {
compatible = "qcom,sc8180x-llcc";
- reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
- <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
- <0 0x09600000 0 0x50000>;
+ reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+ <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+ <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+ <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+ <0 0x09600000 0 0x58000>;
reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
- "llcc3_base", "llcc_broadcast_base";
+ "llcc3_base", "llcc4_base", "llcc5_base",
+ "llcc6_base", "llcc7_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -2805,7 +2847,7 @@
power-domains = <&rpmhpd SC8180X_MMCX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
ports {
#address-cells = <1>;
@@ -2878,7 +2920,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -2964,7 +3006,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
@@ -3030,7 +3072,8 @@
reg = <0 0xae90000 0 0x200>,
<0 0xae90200 0 0x200>,
<0 0xae90400 0 0x600>,
- <0 0xae90a00 0 0x400>;
+ <0 0xae90a00 0 0x400>,
+ <0 0xae91000 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3106,7 +3149,8 @@
reg = <0 0xae98000 0 0x200>,
<0 0xae98200 0 0x200>,
<0 0xae98400 0 0x600>,
- <0 0xae98a00 0 0x400>;
+ <0 0xae98a00 0 0x400>,
+ <0 0xae99000 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <13>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
diff --git a/dts/upstream/src/arm64/qcom/sc8280xp-crd.dts b/dts/upstream/src/arm64/qcom/sc8280xp-crd.dts
index 4121556..372b35f 100644
--- a/dts/upstream/src/arm64/qcom/sc8280xp-crd.dts
+++ b/dts/upstream/src/arm64/qcom/sc8280xp-crd.dts
@@ -977,8 +977,7 @@
reset-n-pins {
pins = "gpio99";
function = "gpio";
- output-high;
- drive-strength = <16>;
+ bias-disable;
};
};
diff --git a/dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 15ae94c..4bf99b6 100644
--- a/dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -100,6 +100,8 @@
#address-cells = <1>;
#size-cells = <0>;
+ orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
+ <&tlmm 49 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
@@ -414,6 +416,13 @@
regulator-always-on;
};
+ vreg_l1b: ldo1 {
+ regulator-name = "vreg_l1b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_l3b: ldo3 {
regulator-name = "vreg_l3b";
regulator-min-microvolt = <1200000>;
@@ -464,6 +473,13 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_l12c: ldo12 {
regulator-name = "vreg_l12c";
regulator-min-microvolt = <1800000>;
@@ -497,6 +513,13 @@
vdd-l6-l9-l10-supply = <&vreg_s12b>;
vdd-l8-supply = <&vreg_s12b>;
+ vreg_l2d: ldo2 {
+ regulator-name = "vreg_l2d";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_l3d: ldo3 {
regulator-name = "vreg_l3d";
regulator-min-microvolt = <1200000>;
@@ -525,12 +548,26 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vreg_l8d: ldo8 {
+ regulator-name = "vreg_l8d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_l9d: ldo9 {
regulator-name = "vreg_l9d";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+
+ vreg_l10d: ldo10 {
+ regulator-name = "vreg_l10d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
};
};
@@ -618,15 +655,16 @@
status = "okay";
- /* FIXME: verify */
touchscreen@10 {
- compatible = "hid-over-i2c";
+ compatible = "elan,ekth5015m", "elan,ekth6915";
reg = <0x10>;
- hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
- vddl-supply = <&vreg_s10b>;
+ reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+ no-reset-on-power-off;
+
+ vcc33-supply = <&vreg_misc_3p3>;
+ vccio-supply = <&vreg_misc_3p3>;
pinctrl-names = "default";
pinctrl-0 = <&ts0_default>;
@@ -731,22 +769,14 @@
pinctrl-0 = <&pcie4_default>;
status = "okay";
+};
- pcie@0 {
- device_type = "pci";
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- bus-range = <0x01 0xff>;
-
- wifi@0 {
- compatible = "pci17cb,1103";
- reg = <0x10000 0x0 0x0 0x0 0x0>;
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
- qcom,ath11k-calibration-variant = "LE_X13S";
- };
+ qcom,ath11k-calibration-variant = "LE_X13S";
};
};
@@ -1168,6 +1198,56 @@
remote-endpoint = <&pmic_glink_con1_hs>;
};
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_hsphy0 {
+ vdda-pll-supply = <&vreg_l1b>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy1 {
+ vdda-pll-supply = <&vreg_l8d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy2 {
+ vdda-pll-supply = <&vreg_l10d>;
+ vdda18-supply = <&vreg_l8c>;
+ vdda33-supply = <&vreg_l2d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy3 {
+ vdda-pll-supply = <&vreg_l10d>;
+ vdda18-supply = <&vreg_l8c>;
+ vdda33-supply = <&vreg_l2d>;
+
+ status = "okay";
+};
+
+&usb_2_qmpphy0 {
+ vdda-phy-supply = <&vreg_l1b>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
+&usb_2_qmpphy1 {
+ vdda-phy-supply = <&vreg_l8d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
&vamacro {
pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
pinctrl-names = "default";
@@ -1417,8 +1497,8 @@
reset-n-pins {
pins = "gpio99";
function = "gpio";
- output-high;
- drive-strength = <16>;
+ drive-strength = <2>;
+ bias-disable;
};
};
diff --git a/dts/upstream/src/arm64/qcom/sc8280xp.dtsi b/dts/upstream/src/arm64/qcom/sc8280xp.dtsi
index d0f82e1..59f0a85 100644
--- a/dts/upstream/src/arm64/qcom/sc8280xp.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc8280xp.dtsi
@@ -50,7 +50,8 @@
reg = <0x0 0x0>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
- capacity-dmips-mhz = <602>;
+ capacity-dmips-mhz = <981>;
+ dynamic-power-coefficient = <549>;
next-level-cache = <&L2_0>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
@@ -77,7 +78,8 @@
reg = <0x0 0x100>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
- capacity-dmips-mhz = <602>;
+ capacity-dmips-mhz = <981>;
+ dynamic-power-coefficient = <549>;
next-level-cache = <&L2_100>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
@@ -99,7 +101,8 @@
reg = <0x0 0x200>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
- capacity-dmips-mhz = <602>;
+ capacity-dmips-mhz = <981>;
+ dynamic-power-coefficient = <549>;
next-level-cache = <&L2_200>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
@@ -121,7 +124,8 @@
reg = <0x0 0x300>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
- capacity-dmips-mhz = <602>;
+ capacity-dmips-mhz = <981>;
+ dynamic-power-coefficient = <549>;
next-level-cache = <&L2_300>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
@@ -144,6 +148,7 @@
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <590>;
next-level-cache = <&L2_400>;
power-domains = <&CPU_PD4>;
power-domain-names = "psci";
@@ -166,6 +171,7 @@
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <590>;
next-level-cache = <&L2_500>;
power-domains = <&CPU_PD5>;
power-domain-names = "psci";
@@ -188,6 +194,7 @@
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <590>;
next-level-cache = <&L2_600>;
power-domains = <&CPU_PD6>;
power-domain-names = "psci";
@@ -210,6 +217,7 @@
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <590>;
next-level-cache = <&L2_700>;
power-domains = <&CPU_PD7>;
power-domain-names = "psci";
@@ -300,6 +308,7 @@
scm: scm {
compatible = "qcom,scm-sc8280xp", "qcom,scm";
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+ qcom,dload-mode = <&tcsr 0x13000>;
};
};
@@ -862,6 +871,18 @@
#mbox-cells = <2>;
};
+ qfprom: efuse@784000 {
+ compatible = "qcom,sc8280xp-qfprom", "qcom,qfprom";
+ reg = <0 0x00784000 0 0x3000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpu_speed_bin: gpu-speed-bin@18b {
+ reg = <0x18b 0x1>;
+ bits = <5 3>;
+ };
+ };
+
qup2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x2000>;
@@ -1731,6 +1752,8 @@
linux,pci-domain = <6>;
num-lanes = <1>;
+ msi-map = <0x0 &its 0xe0000 0x10000>;
+
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
@@ -1780,6 +1803,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie4_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie4_phy: phy@1c06000 {
@@ -1832,6 +1865,8 @@
linux,pci-domain = <5>;
num-lanes = <2>;
+ msi-map = <0x0 &its 0xd0000 0x10000>;
+
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
@@ -1879,6 +1914,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie3b_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie3b_phy: phy@1c0e000 {
@@ -1931,6 +1976,8 @@
linux,pci-domain = <4>;
num-lanes = <4>;
+ msi-map = <0x0 &its 0xc0000 0x10000>;
+
interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
@@ -1978,6 +2025,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie3a_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie3a_phy: phy@1c14000 {
@@ -2033,6 +2090,8 @@
linux,pci-domain = <3>;
num-lanes = <2>;
+ msi-map = <0x0 &its 0xb0000 0x10000>;
+
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
@@ -2080,6 +2139,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie2b_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie2b_phy: phy@1c1e000 {
@@ -2132,6 +2201,8 @@
linux,pci-domain = <2>;
num-lanes = <4>;
+ msi-map = <0x0 &its 0xa0000 0x10000>;
+
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
@@ -2179,6 +2250,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie2a_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie2a_phy: phy@1c24000 {
@@ -3342,6 +3423,88 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ usb_2: usb@a4f8800 {
+ compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
+ reg = <0 0x0a4f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_SLEEP_CLK>,
+ <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+ "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 859 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 127 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 126 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 129 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 128 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 131 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 130 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 133 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 132 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "pwr_event_1", "pwr_event_2",
+ "pwr_event_3", "pwr_event_4",
+ "hs_phy_1", "hs_phy_2",
+ "hs_phy_3", "hs_phy_4",
+ "dp_hs_phy_1", "dm_hs_phy_1",
+ "dp_hs_phy_2", "dm_hs_phy_2",
+ "dp_hs_phy_3", "dm_hs_phy_3",
+ "dp_hs_phy_4", "dm_hs_phy_4",
+ "ss_phy_1", "ss_phy_2";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_MP_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_MP 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_MP 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_2_dwc3: usb@a400000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a400000 0 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x800 0x0>;
+ phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
+ <&usb_2_hsphy1>, <&usb_2_qmpphy1>,
+ <&usb_2_hsphy2>,
+ <&usb_2_hsphy3>;
+ phy-names = "usb2-0", "usb3-0",
+ "usb2-1", "usb3-1",
+ "usb2-2",
+ "usb2-3";
+ dr_mode = "host";
+ };
+ };
+
usb_0: usb@a6f8800 {
compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
@@ -3366,10 +3529,12 @@
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
+ "hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
"ss_phy_irq";
@@ -3426,10 +3591,12 @@
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 12 IRQ_TYPE_EDGE_BOTH>,
<&pdc 13 IRQ_TYPE_EDGE_BOTH>,
<&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
+ "hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
"ss_phy_irq";
@@ -4453,6 +4620,13 @@
#thermal-sensor-cells = <1>;
};
+ restart@c264000 {
+ compatible = "qcom,pshold";
+ reg = <0 0x0c264000 0 0x4>;
+ /* TZ seems to block access */
+ status = "reserved";
+ };
+
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
@@ -4804,7 +4978,7 @@
#size-cells = <2>;
ranges;
- msi-controller@17a40000 {
+ its: msi-controller@17a40000 {
compatible = "arm,gic-v3-its";
reg = <0 0x17a40000 0 0x20000>;
msi-controller;
@@ -4971,6 +5145,11 @@
<0 0x18592000 0 0x1000>;
reg-names = "freq-domain0", "freq-domain1";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dcvsh-irq-0",
+ "dcvsh-irq-1";
+
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
clock-names = "xo", "alternate";
diff --git a/dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
index 819a5f8..a4b722e 100644
--- a/dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
@@ -90,6 +90,8 @@
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
key-camera-focus {
label = "Camera Focus";
@@ -645,6 +647,13 @@
bias-disable;
};
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio64", "gpio113";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
imx300_vana_default: imx300-vana-default-state {
pins = "gpio50";
function = "gpio";
diff --git a/dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts b/dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts
index 057579a..e2708c7 100644
--- a/dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts
+++ b/dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts
@@ -116,6 +116,33 @@
};
};
+&pmi632_typec {
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "dual";
+ data-role = "dual";
+ self-powered;
+
+ typec-power-opmode = "default";
+ pd-disable;
+
+ port {
+ pmi632_hs_in: endpoint {
+ remote-endpoint = <&usb_dwc3_hs>;
+ };
+ };
+ };
+};
+
+&pmi632_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <1000000>;
+ status = "okay";
+};
+
&sdhc_1 {
status = "okay";
vmmc-supply = <&pm8953_l8>;
@@ -240,8 +267,8 @@
status = "okay";
};
-&usb3_dwc3 {
- dr_mode = "peripheral";
+&usb_dwc3_hs {
+ remote-endpoint = <&pmi632_hs_in>;
};
&wcnss {
diff --git a/dts/upstream/src/arm64/qcom/sdm670-google-sargo.dts b/dts/upstream/src/arm64/qcom/sdm670-google-sargo.dts
index 32a7bd5..176b011 100644
--- a/dts/upstream/src/arm64/qcom/sdm670-google-sargo.dts
+++ b/dts/upstream/src/arm64/qcom/sdm670-google-sargo.dts
@@ -441,6 +441,47 @@
};
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l1a_1p225>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "samsung,s6e3fa7-ams559nk06";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_default>;
+
+ power-supply = <&vreg_l6b_3p3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l1b_0p925>;
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
&pm660l_gpios {
vol_up_pin: vol-up-state {
pins = "gpio7";
@@ -481,6 +522,29 @@
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
+ panel_default: panel-default-state {
+ te-pins {
+ pins = "gpio10";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ reset-pins {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ mode-pins {
+ pins = "gpio76";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
touchscreen_default: ts-default-state {
ts-reset-pins {
pins = "gpio99";
diff --git a/dts/upstream/src/arm64/qcom/sdm845-db845c.dts b/dts/upstream/src/arm64/qcom/sdm845-db845c.dts
index 1f51732..9a6d3d0 100644
--- a/dts/upstream/src/arm64/qcom/sdm845-db845c.dts
+++ b/dts/upstream/src/arm64/qcom/sdm845-db845c.dts
@@ -195,6 +195,12 @@
gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /*
+ * FIXME: this regulator is responsible for VBUS on the left USB
+ * port. Keep it always on until we can correctly model this
+ * relationship.
+ */
+ regulator-always-on;
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pwren_state>;
diff --git a/dts/upstream/src/arm64/qcom/sdm845.dtsi b/dts/upstream/src/arm64/qcom/sdm845.dtsi
index 2f20be9..10de2bd 100644
--- a/dts/upstream/src/arm64/qcom/sdm845.dtsi
+++ b/dts/upstream/src/arm64/qcom/sdm845.dtsi
@@ -2375,6 +2375,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -2479,6 +2489,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0a000 {
diff --git a/dts/upstream/src/arm64/qcom/sdx75.dtsi b/dts/upstream/src/arm64/qcom/sdx75.dtsi
index 7dbdf8c..da17040 100644
--- a/dts/upstream/src/arm64/qcom/sdx75.dtsi
+++ b/dts/upstream/src/arm64/qcom/sdx75.dtsi
@@ -224,7 +224,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -411,7 +411,7 @@
hwlocks = <&tcsr_mutex 3>;
};
- soc: soc {
+ soc: soc@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
diff --git a/dts/upstream/src/arm64/qcom/sm6115.dtsi b/dts/upstream/src/arm64/qcom/sm6115.dtsi
index aca0a87..9ed0621 100644
--- a/dts/upstream/src/arm64/qcom/sm6115.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm6115.dtsi
@@ -1090,6 +1090,7 @@
power-domains = <&rpmpd SM6115_VDDCX>;
operating-points-v2 = <&sdhc1_opp_table>;
+ iommus = <&apps_smmu 0x00c0 0x0>;
interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
&bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
diff --git a/dts/upstream/src/arm64/qcom/sm6350.dtsi b/dts/upstream/src/arm64/qcom/sm6350.dtsi
index 0be0535..84ff20a 100644
--- a/dts/upstream/src/arm64/qcom/sm6350.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm6350.dtsi
@@ -1205,6 +1205,37 @@
status = "disabled";
};
+ cryptobam: dma-controller@1dc4000 {
+ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+ reg = <0 0x01dc4000 0 0x24000>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <16>;
+ qcom,num-ees = <4>;
+ iommus = <&apps_smmu 0x426 0x11>,
+ <&apps_smmu 0x432 0x0>,
+ <&apps_smmu 0x436 0x11>,
+ <&apps_smmu 0x438 0x1>,
+ <&apps_smmu 0x43f 0x0>;
+ };
+
+ crypto: crypto@1dfa000 {
+ compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce";
+ reg = <0 0x01dfa000 0 0x6000>;
+ dmas = <&cryptobam 4>, <&cryptobam 5>;
+ dma-names = "rx", "tx";
+ iommus = <&apps_smmu 0x426 0x11>,
+ <&apps_smmu 0x432 0x0>,
+ <&apps_smmu 0x436 0x11>,
+ <&apps_smmu 0x438 0x1>,
+ <&apps_smmu 0x43f 0x0>;
+ interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "memory";
+ };
+
ipa: ipa@1e40000 {
compatible = "qcom,sm6350-ipa";
@@ -2033,6 +2064,14 @@
remote-endpoint = <&mdss_dsi0_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp_in>;
+ };
+ };
};
mdp_opp_table: opp-table {
@@ -2070,6 +2109,86 @@
};
};
+ mdss_dp: displayport-controller@ae90000 {
+ compatible = "qcom,sm6350-dp", "qcom,sm8350-dp";
+ reg = <0 0xae90000 0 0x200>,
+ <0 0xae90200 0 0x200>,
+ <0 0xae90400 0 0x600>,
+ <0 0xae91000 0 0x400>,
+ <0 0xae91400 0 0x400>;
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SM6350_CX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp_out: endpoint {
+ };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
mdss_dsi0: dsi@ae94000 {
compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae94000 0 0x400>;
diff --git a/dts/upstream/src/arm64/qcom/sm8150-hdk.dts b/dts/upstream/src/arm64/qcom/sm8150-hdk.dts
index de670b4..6cb6f50 100644
--- a/dts/upstream/src/arm64/qcom/sm8150-hdk.dts
+++ b/dts/upstream/src/arm64/qcom/sm8150-hdk.dts
@@ -609,6 +609,11 @@
firmware-name = "qcom/sm8150/cdsp.mbn";
};
+&remoteproc_mpss {
+ firmware-name = "qcom/sm8150/modem.mbn";
+ status = "okay";
+};
+
&remoteproc_slpi {
status = "okay";
@@ -713,3 +718,14 @@
&usb_2_dwc3 {
dr_mode = "host";
};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+
+ qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk";
+};
diff --git a/dts/upstream/src/arm64/qcom/sm8150.dtsi b/dts/upstream/src/arm64/qcom/sm8150.dtsi
index a35c085..ff22e43 100644
--- a/dts/upstream/src/arm64/qcom/sm8150.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8150.dtsi
@@ -1901,6 +1901,16 @@
pinctrl-0 = <&pcie0_default_state>;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -2011,6 +2021,16 @@
pinctrl-0 = <&pcie1_default_state>;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0e000 {
diff --git a/dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi b/dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
index 6f54f50..41f1174 100644
--- a/dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -636,7 +636,8 @@
connector {
compatible = "usb-c-connector";
- power-role = "source";
+ op-sink-microwatt = <10000000>;
+ power-role = "dual";
data-role = "dual";
self-powered;
@@ -645,6 +646,12 @@
PDO_FIXED_USB_COMM |
PDO_FIXED_DATA_SWAP)>;
+ sink-pdos = <PDO_FIXED(5000, 3000,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)
+ PDO_VAR(5000, 12000, 5000)>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -661,6 +668,8 @@
};
&pm8150b_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
status = "okay";
};
diff --git a/dts/upstream/src/arm64/qcom/sm8250.dtsi b/dts/upstream/src/arm64/qcom/sm8250.dtsi
index 7f2333c..8ccade6 100644
--- a/dts/upstream/src/arm64/qcom/sm8250.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8250.dtsi
@@ -2203,6 +2203,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -2318,6 +2328,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0e000 {
@@ -2433,6 +2453,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie2_phy: phy@1c16000 {
diff --git a/dts/upstream/src/arm64/qcom/sm8350-hdk.dts b/dts/upstream/src/arm64/qcom/sm8350-hdk.dts
index b43d264..4c25ab2 100644
--- a/dts/upstream/src/arm64/qcom/sm8350-hdk.dts
+++ b/dts/upstream/src/arm64/qcom/sm8350-hdk.dts
@@ -42,6 +42,7 @@
compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
+ orientation-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
diff --git a/dts/upstream/src/arm64/qcom/sm8350.dtsi b/dts/upstream/src/arm64/qcom/sm8350.dtsi
index a5e7dbb..f7c4700 100644
--- a/dts/upstream/src/arm64/qcom/sm8350.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8350.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
@@ -1572,6 +1573,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -1669,6 +1680,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0e000 {
@@ -1730,6 +1751,11 @@
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ufs-ddr", "cpu-ufs";
freq-table-hz =
<75000000 300000000>,
<0 0>,
diff --git a/dts/upstream/src/arm64/qcom/sm8450-hdk.dts b/dts/upstream/src/arm64/qcom/sm8450-hdk.dts
index 0786cff..3be46b5 100644
--- a/dts/upstream/src/arm64/qcom/sm8450-hdk.dts
+++ b/dts/upstream/src/arm64/qcom/sm8450-hdk.dts
@@ -95,6 +95,7 @@
compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
+ orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
diff --git a/dts/upstream/src/arm64/qcom/sm8450-qrd.dts b/dts/upstream/src/arm64/qcom/sm8450-qrd.dts
index c7d0594..7b62ead 100644
--- a/dts/upstream/src/arm64/qcom/sm8450-qrd.dts
+++ b/dts/upstream/src/arm64/qcom/sm8450-qrd.dts
@@ -467,6 +467,14 @@
vdda-pll-supply = <&vreg_l5b_0p88>;
vdda18-supply = <&vreg_l1c_1p8>;
vdda33-supply = <&vreg_l2b_3p07>;
+ qcom,squelch-detector-bp = <(-2090)>;
+ qcom,hs-disconnect-bp = <1743>;
+ qcom,pre-emphasis-amplitude-bp = <40000>;
+ qcom,pre-emphasis-duration-bp = <20000>;
+ qcom,hs-amplitude-bp = <2000>;
+ qcom,hs-output-impedance-micro-ohms = <2600000>;
+ qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+ qcom,hs-rise-fall-time-bp = <(-4100)>;
};
&usb_1_qmpphy {
diff --git a/dts/upstream/src/arm64/qcom/sm8450.dtsi b/dts/upstream/src/arm64/qcom/sm8450.dtsi
index 024d265..616461f 100644
--- a/dts/upstream/src/arm64/qcom/sm8450.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8450.dtsi
@@ -1846,6 +1846,16 @@
pinctrl-0 = <&pcie0_default_state>;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -1963,6 +1973,16 @@
pinctrl-0 = <&pcie1_default_state>;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0e000 {
@@ -2355,6 +2375,7 @@
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "sdsp";
+ qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
@@ -2657,6 +2678,7 @@
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "adsp";
+ qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
@@ -2723,6 +2745,7 @@
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "cdsp";
+ qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/upstream/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/dts/upstream/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts
new file mode 100644
index 0000000..85e0d3d
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/cs35l45.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+/* TODO: Only one SID of PMR735D seems accessible? */
+
+/delete-node/ &hwfence_shbuf;
+/delete-node/ &mpss_mem;
+/delete-node/ &rmtfs_mem;
+/ {
+ model = "Sony Xperia 1 V";
+ compatible = "sony,pdx234", "qcom,sm8550";
+ chassis-type = "handset";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c4 = &i2c4;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c16 = &i2c_hub_2;
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ label = "gpio-keys";
+
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+ pinctrl-names = "default";
+
+ key-camera-focus {
+ label = "Camera Focus";
+ linux,code = <KEY_CAMERA_FOCUS>;
+ gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ key-camera-snapshot {
+ label = "Camera Snapshot";
+ gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+ orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ };
+ };
+ };
+ };
+ };
+
+ reserved-memory {
+ mpss_mem: mpss-region@89800000 {
+ reg = <0x0 0x89800000 0x0 0x10800000>;
+ no-map;
+ };
+
+ splash@b8000000 {
+ reg = <0x0 0xb8000000 0x0 0x2b00000>;
+ no-map;
+ };
+
+ hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+ reg = <0x0 0xe6440000 0x0 0x2dd000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@f8b00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0xf8b00000 0x0 0x280000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+ };
+
+ ramoops@ffd00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffd00000 0x0 0xc0000>;
+ console-size = <0x40000>;
+ record-size = <0x1000>;
+ pmsg-size = <0x40000>;
+ ecc-size = <16>;
+ };
+
+ rdtag-store-region@ffdc0000 {
+ reg = <0x0 0xffdc0000 0x0 0x40000>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ pm8550_bob1: bob1 {
+ regulator-name = "pm8550_bob1";
+ regulator-min-microvolt = <3416000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */
+
+ pm8550_l1: ldo1 {
+ regulator-name = "pm8550_l1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l2: ldo2 {
+ regulator-name = "pm8550_l2";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L4 exists in cmd-db, but the board seems to crash on access */
+
+ pm8550_l5: ldo5 {
+ regulator-name = "pm8550_l5";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l6: ldo6 {
+ regulator-name = "pm8550_l6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l7: ldo7 {
+ regulator-name = "pm8550_l7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l8: ldo8 {
+ regulator-name = "pm8550_l8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l9: ldo9 {
+ regulator-name = "pm8550_l9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l10: ldo10 {
+ regulator-name = "pm8550_l10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l11: ldo11 {
+ regulator-name = "pm8550_l11";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l12: ldo12 {
+ regulator-name = "pm8550_l12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l13: ldo13 {
+ regulator-name = "pm8550_l13";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l14: ldo14 {
+ regulator-name = "pm8550_l14";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l15: ldo15 {
+ regulator-name = "pm8550_l15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l16: ldo16 {
+ regulator-name = "pm8550_l16";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550_l17: ldo17 {
+ regulator-name = "pm8550_l17";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ pm8550vs_0_l1: ldo1 {
+ regulator-name = "pm8550vs_0_l1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_0_l3: ldo3 {
+ regulator-name = "pm8550vs_0_l3";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ pm8550vs_1_l1: ldo1 {
+ regulator-name = "pm8550vs_1_l1";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L3 exists in cmd-db, but the board seems to crash on access */
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ pm8550vs_2_s4: smps4 {
+ regulator-name = "pm8550vs_2_s4";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_2_s5: smps5 {
+ regulator-name = "pm8550vs_2_s5";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_2_l1: ldo1 {
+ regulator-name = "pm8550vs_2_l1";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_2_l2: ldo2 {
+ regulator-name = "pm8550vs_2_l2";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <968000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_2_l3: ldo3 {
+ regulator-name = "pm8550vs_2_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ pm8550ve_s4: smps4 {
+ regulator-name = "pm8550ve_s4";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550ve_l1: ldo1 {
+ regulator-name = "pm8550ve_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550ve_l2: ldo2 {
+ regulator-name = "pm8550ve_l2";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550ve_l3: ldo3 {
+ regulator-name = "pm8550ve_l3";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "g";
+
+ pm8550vs_3_s1: smps1 {
+ regulator-name = "pm8550vs_3_s1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s2: smps2 {
+ regulator-name = "pm8550vs_3_s2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1036000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s3: smps3 {
+ regulator-name = "pm8550vs_3_s3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s4: smps4 {
+ regulator-name = "pm8550vs_3_s4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s5: smps5 {
+ regulator-name = "pm8550vs_3_s5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_s6: smps6 {
+ regulator-name = "pm8550vs_3_s6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_l1: ldo1 {
+ regulator-name = "pm8550vs_3_l1";
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_l2: ldo2 {
+ regulator-name = "pm8550vs_3_l2";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8550vs_3_l3: ldo3 {
+ regulator-name = "pm8550vs_3_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&i2c_hub_2 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic@75 {
+ compatible = "dlg,slg51000";
+ reg = <0x75>;
+ dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&cam_pwr_a_cs>;
+ pinctrl-names = "default";
+
+ regulators {
+ slg51000_a_ldo1: ldo1 {
+ regulator-name = "slg51000_a_ldo1";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_a_ldo2: ldo2 {
+ regulator-name = "slg51000_a_ldo2";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_a_ldo3: ldo3 {
+ regulator-name = "slg51000_a_ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_a_ldo4: ldo4 {
+ regulator-name = "slg51000_a_ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_a_ldo5: ldo5 {
+ regulator-name = "slg51000_a_ldo5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_a_ldo6: ldo6 {
+ regulator-name = "slg51000_a_ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_a_ldo7: ldo7 {
+ regulator-name = "slg51000_a_ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+ };
+ };
+};
+
+&i2c_master_hub_0 {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <1000000>;
+ status = "okay";
+
+ /* NXP NFC @ 28 */
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* LX Semi SW82907 touchscreen @ 28 */
+};
+
+&i2c10 {
+ clock-frequency = <1000000>;
+ status = "okay";
+
+ /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&i2c11 {
+ clock-frequency = <1000000>;
+ status = "okay";
+
+ cs35l41_l: speaker-amp@30 {
+ compatible = "cirrus,cs35l45";
+ reg = <0x30>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+ cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+ #sound-dai-cells = <1>;
+
+ cirrus,gpio-ctrl2 {
+ gpio-ctrl = <0x2>;
+ };
+ };
+
+ cs35l41_r: speaker-amp@31 {
+ compatible = "cirrus,cs35l45";
+ reg = <0x31>;
+ interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+ cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
+ #sound-dai-cells = <1>;
+
+ cirrus,gpio-ctrl2 {
+ gpio-ctrl = <0x2>;
+ };
+ };
+};
+
+&pcie0 {
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&pm8550vs_2_l1>;
+ vdda-pll-supply = <&pm8550vs_2_l3>;
+
+ status = "okay";
+};
+
+&pm8550_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>, <4>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1000000>;
+ flash-max-timeout-us = <1280000>;
+ function-enumerator = <0>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <2>, <3>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1000000>;
+ flash-max-timeout-us = <1280000>;
+ function-enumerator = <1>;
+ };
+};
+
+&pm8550_gpios {
+ vol_down_n: volume-down-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+
+ sdc2_card_det_n: sd-card-det-n-state {
+ pins = "gpio12";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-down;
+ output-disable;
+ input-enable;
+ };
+};
+
+&pm8550b_gpios {
+ snapshot_n: snapshot-n-state {
+ pins = "gpio7";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+
+ focus_n: focus-n-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pm8550vs_g_gpios {
+ cam_pwr_a_cs: cam-pwr-a-cs-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <0x01>;
+ drive-push-pull;
+ output-low;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ };
+};
+
+&pm8550b_eusb2_repeater {
+ qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
+ qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
+ qcom,tune-usb2-preem = /bits/ 8 <0x7>;
+ vdd18-supply = <&pm8550_l15>;
+ vdd3-supply = <&pm8550_l5>;
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEUP>;
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",
+ "qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",
+ "qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+ vmmc-supply = <&pm8550_l9>;
+ vqmmc-supply = <&pm8550_l8>;
+ no-sdio;
+ no-mmc;
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <32 8>;
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&pm8550vs_2_l1>;
+ vdda12-supply = <&pm8550vs_2_l3>;
+ phys = <&pm8550b_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&pm8550vs_2_l3>;
+ vdda-pll-supply = <&pm8550ve_l3>;
+ orientation-switch;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
diff --git a/dts/upstream/src/arm64/qcom/sm8550.dtsi b/dts/upstream/src/arm64/qcom/sm8550.dtsi
index 3348bc0..bc5aeb0 100644
--- a/dts/upstream/src/arm64/qcom/sm8550.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8550.dtsi
@@ -812,6 +812,7 @@
dma-channels = <12>;
dma-channel-mask = <0x3e>;
iommus = <&apps_smmu 0x436 0>;
+ dma-coherent;
status = "disabled";
};
@@ -823,6 +824,7 @@
clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
iommus = <&apps_smmu 0x423 0>;
+ dma-coherent;
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
@@ -1322,6 +1324,7 @@
dma-channels = <12>;
dma-channel-mask = <0x1e>;
iommus = <&apps_smmu 0xb6 0>;
+ dma-coherent;
status = "disabled";
};
@@ -1335,6 +1338,7 @@
iommus = <&apps_smmu 0xa3 0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
interconnect-names = "qup-core";
+ dma-coherent;
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
@@ -1769,6 +1773,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -1881,6 +1895,16 @@
phy-names = "pciephy";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0e000 {
@@ -3225,12 +3249,21 @@
reg = <0x0 0x0a600000 0x0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x40 0x0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,usb3_lpm_capable;
phys = <&usb_1_hsphy>,
<&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+ dma-coherent;
ports {
#address-cells = <1>;
@@ -3966,6 +3999,7 @@
<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
};
intc: interrupt-controller@17100000 {
@@ -4314,6 +4348,7 @@
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "adsp";
+ qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
@@ -4452,6 +4487,7 @@
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "cdsp";
+ qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/upstream/src/arm64/qcom/sm8650-mtp.dts b/dts/upstream/src/arm64/qcom/sm8650-mtp.dts
index 4450273..d04ceaa 100644
--- a/dts/upstream/src/arm64/qcom/sm8650-mtp.dts
+++ b/dts/upstream/src/arm64/qcom/sm8650-mtp.dts
@@ -641,10 +641,6 @@
status = "okay";
};
-&mdss_mdp {
- status = "okay";
-};
-
&pcie_1_phy_aux_clk {
clock-frequency = <1000>;
};
diff --git a/dts/upstream/src/arm64/qcom/sm8650-qrd.dts b/dts/upstream/src/arm64/qcom/sm8650-qrd.dts
index b07cac2..4e94f7f 100644
--- a/dts/upstream/src/arm64/qcom/sm8650-qrd.dts
+++ b/dts/upstream/src/arm64/qcom/sm8650-qrd.dts
@@ -766,6 +766,14 @@
status = "okay";
};
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ firmware-name = "qcom/sm8650/gen70900_zap.mbn";
+ };
+};
+
&lpass_tlmm {
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
pins = "gpio21";
@@ -827,10 +835,6 @@
remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};
-&mdss_mdp {
- status = "okay";
-};
-
&pcie_1_phy_aux_clk {
clock-frequency = <1000>;
};
diff --git a/dts/upstream/src/arm64/qcom/sm8650.dtsi b/dts/upstream/src/arm64/qcom/sm8650.dtsi
index eb11786..62a6e77 100644
--- a/dts/upstream/src/arm64/qcom/sm8650.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8650.dtsi
@@ -485,9 +485,9 @@
no-map;
};
- /* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+ /* Merged aop_config, tme_crash_dump, tme_log, uefi_log, and chipinfo regions */
aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
- reg = <0 0x81c80000 0 0x74000>;
+ reg = <0 0x81c80000 0 0x75000>;
no-map;
};
@@ -2293,6 +2293,16 @@
dma-coherent;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_phy: phy@1c06000 {
@@ -2420,6 +2430,16 @@
<0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie1_phy: phy@1c0e000 {
@@ -2589,6 +2609,143 @@
#reset-cells = <1>;
};
+ gpu: gpu@3d00000 {
+ compatible = "qcom,adreno-43051401", "qcom,adreno";
+ reg = <0x0 0x03d00000 0x0 0x40000>,
+ <0x0 0x03d9e000 0x0 0x2000>,
+ <0x0 0x03d61000 0x0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory",
+ "cx_mem",
+ "cx_dbgc";
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0 0x0>,
+ <&adreno_smmu 1 0x0>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&gpu_micro_code_mem>;
+ };
+
+ /* Speedbin needs more work on A740+, keep only lower freqs */
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-231000000 {
+ opp-hz = /bits/ 64 <231000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ };
+
+ opp-310000000 {
+ opp-hz = /bits/ 64 <310000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+
+ opp-366000000 {
+ opp-hz = /bits/ 64 <366000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ };
+
+ opp-422000000 {
+ opp-hz = /bits/ 64 <422000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ opp-578000000 {
+ opp-hz = /bits/ 64 <578000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-629000000 {
+ opp-hz = /bits/ 64 <629000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ opp-680000000 {
+ opp-hz = /bits/ 64 <680000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ };
+
+ opp-770000000 {
+ opp-hz = /bits/ 64 <770000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ opp-834000000 {
+ opp-hz = /bits/ 64 <834000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-750.1", "qcom,adreno-gmu";
+ reg = <0x0 0x03d6a000 0x0 0x35000>,
+ <0x0 0x03d50000 0x0 0x10000>,
+ <0x0 0x0b280000 0x0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_DEMET_CLK>;
+ clock-names = "ahb",
+ "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "hub",
+ "demet";
+
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+
+ iommus = <&adreno_smmu 5 0x0>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-260000000 {
+ opp-hz = /bits/ 64 <260000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ opp-625000000 {
+ opp-hz = /bits/ 64 <625000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+ };
+ };
+
gpucc: clock-controller@3d90000 {
compatible = "qcom,sm8650-gpucc";
reg = <0 0x03d90000 0 0xa000>;
@@ -2602,6 +2759,50 @@
#power-domain-cells = <1>;
};
+ adreno_smmu: iommu@3da0000 {
+ compatible = "qcom,sm8650-smmu-500", "qcom,adreno-smmu",
+ "qcom,smmu-500", "arm,mmu-500";
+ reg = <0x0 0x03da0000 0x0 0x40000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>;
+ clock-names = "hlos",
+ "bus",
+ "iface",
+ "ahb";
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ dma-coherent;
+ };
+
ipa: ipa@3f40000 {
compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
@@ -3582,14 +3783,16 @@
compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
- interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_RISING>,
<&pdc 15 IRQ_TYPE_EDGE_RISING>,
- <&pdc 14 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "hs_phy_irq",
- "ss_phy_irq",
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
"dm_hs_phy_irq",
- "dp_hs_phy_irq";
+ "ss_phy_irq";
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4843,6 +5046,8 @@
label = "adsp";
+ qcom,non-secure-domain;
+
#address-cells = <1>;
#size-cells = <0>;
@@ -5000,6 +5205,8 @@
label = "cdsp";
+ qcom,non-secure-domain;
+
#address-cells = <1>;
#size-cells = <0>;
@@ -5082,6 +5289,38 @@
<&apps_smmu 0x19c8 0x0>;
dma-coherent;
};
+
+ /* note: secure cb9 in downstream */
+
+ compute-cb@10 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+
+ iommus = <&apps_smmu 0x196c 0x0>,
+ <&apps_smmu 0x0c0c 0x20>,
+ <&apps_smmu 0x19cc 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+
+ iommus = <&apps_smmu 0x196d 0x0>,
+ <&apps_smmu 0x0c0d 0x20>,
+ <&apps_smmu 0x19cd 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <14>;
+
+ iommus = <&apps_smmu 0x196e 0x0>,
+ <&apps_smmu 0x0c0e 0x20>,
+ <&apps_smmu 0x19ce 0x0>;
+ dma-coherent;
+ };
};
};
};
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-crd.dts b/dts/upstream/src/arm64/qcom/x1e80100-crd.dts
index 6a0a545..be6b1e7 100644
--- a/dts/upstream/src/arm64/qcom/x1e80100-crd.dts
+++ b/dts/upstream/src/arm64/qcom/x1e80100-crd.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
/ {
model = "Qualcomm Technologies, Inc. X1E80100 CRD";
@@ -48,6 +49,15 @@
stdout-path = "serial0:115200n8";
};
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
sound {
compatible = "qcom,x1e80100-sndcard";
model = "X1E80100-CRD";
@@ -92,7 +102,7 @@
};
codec {
- sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+ sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
};
platform {
@@ -598,8 +608,6 @@
compatible = "qcom,x1e80100-dp";
/delete-property/ #sound-dai-cells;
- data-lanes = <0 1 2 3>;
-
status = "okay";
aux-bus {
@@ -619,6 +627,9 @@
port@1 {
reg = <1>;
mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
remote-endpoint = <&edp_panel_in>;
};
};
@@ -680,16 +691,32 @@
status = "okay";
};
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l8b_3p0>;
+};
+
&swr0 {
status = "okay";
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
/* WSA8845, Left Woofer */
left_woofer: speaker@0,0 {
compatible = "sdw20217020400";
reg = <0 0>;
- pinctrl-0 = <&spkr_01_sd_n_active>;
- pinctrl-names = "default";
- powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "WooferLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -700,8 +727,7 @@
left_tweeter: speaker@0,1 {
compatible = "sdw20217020400";
reg = <0 1>;
- /* pinctrl in left_woofer node because of sharing the GPIO*/
- powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "TwitterLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -727,20 +753,21 @@
wcd_tx: codec@0,3 {
compatible = "sdw20217010d00";
reg = <0 3>;
- qcom,tx-port-mapping = <1 1 2 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
};
};
&swr3 {
status = "okay";
+ pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+ pinctrl-names = "default";
+
/* WSA8845, Right Woofer */
right_woofer: speaker@0,0 {
compatible = "sdw20217020400";
reg = <0 0>;
- pinctrl-0 = <&spkr_23_sd_n_active>;
- pinctrl-names = "default";
- powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "WooferRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -751,8 +778,7 @@
right_tweeter: speaker@0,1 {
compatible = "sdw20217020400";
reg = <0 1>;
- /* pinctrl in right_woofer node because of sharing the GPIO*/
- powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "TwitterRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -817,6 +843,8 @@
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_0_eusb2_repeater>;
+
status = "okay";
};
@@ -837,6 +865,8 @@
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_1_eusb2_repeater>;
+
status = "okay";
};
@@ -857,6 +887,8 @@
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_2_eusb2_repeater>;
+
status = "okay";
};
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-pmics.dtsi b/dts/upstream/src/arm64/qcom/x1e80100-pmics.dtsi
new file mode 100644
index 0000000..04301f7
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/x1e80100-pmics.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+};
+
+&spmi_bus1 {
+ smb2360_0: pmic@7 {
+ compatible = "qcom,smb2360", "qcom,spmi-pmic";
+ reg = <0x7 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2360_0_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2360-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+
+ smb2360_1: pmic@a {
+ compatible = "qcom,smb2360", "qcom,spmi-pmic";
+ reg = <0xa SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2360_1_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2360-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+
+ smb2360_2: pmic@b {
+ compatible = "qcom,smb2360", "qcom,spmi-pmic";
+ reg = <0xb SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2360_2_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2360-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+};
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-qcp.dts b/dts/upstream/src/arm64/qcom/x1e80100-qcp.dts
index e76d290..8f67c39 100644
--- a/dts/upstream/src/arm64/qcom/x1e80100-qcp.dts
+++ b/dts/upstream/src/arm64/qcom/x1e80100-qcp.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
/ {
model = "Qualcomm Technologies, Inc. X1E80100 QCP";
@@ -22,6 +23,15 @@
stdout-path = "serial0:115200n8";
};
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
@@ -409,8 +419,6 @@
compatible = "qcom,x1e80100-dp";
/delete-property/ #sound-dai-cells;
- data-lanes = <0 1 2 3>;
-
status = "okay";
aux-bus {
@@ -430,6 +438,9 @@
port@1 {
reg = <1>;
mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
remote-endpoint = <&edp_panel_in>;
};
};
@@ -491,6 +502,21 @@
status = "okay";
};
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l8b_3p0>;
+};
+
&tlmm {
gpio-reserved-ranges = <33 3>, /* Unused */
<44 4>, /* SPI (TPM) */
@@ -513,6 +539,8 @@
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_0_eusb2_repeater>;
+
status = "okay";
};
@@ -533,6 +561,8 @@
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_1_eusb2_repeater>;
+
status = "okay";
};
@@ -553,6 +583,8 @@
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_2_eusb2_repeater>;
+
status = "okay";
};
diff --git a/dts/upstream/src/arm64/qcom/x1e80100.dtsi b/dts/upstream/src/arm64/qcom/x1e80100.dtsi
index 6b40082..05e4d49 100644
--- a/dts/upstream/src/arm64/qcom/x1e80100.dtsi
+++ b/dts/upstream/src/arm64/qcom/x1e80100.dtsi
@@ -2737,15 +2737,17 @@
device_type = "pci";
compatible = "qcom,pcie-x1e80100";
reg = <0 0x01bf8000 0 0x3000>,
- <0 0x70000000 0 0xf1d>,
- <0 0x70000f20 0 0xa8>,
+ <0 0x70000000 0 0xf20>,
+ <0 0x70000f40 0 0xa8>,
<0 0x70001000 0 0x1000>,
- <0 0x70100000 0 0x100000>;
+ <0 0x70100000 0 0x100000>,
+ <0 0x01bfb000 0 0x1000>;
reg-names = "parf",
"dbi",
"elbi",
"atu",
- "config";
+ "config",
+ "mhi";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
@@ -3088,7 +3090,7 @@
qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
- qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
@@ -4095,8 +4097,6 @@
mdss_dp3_in: endpoint {
remote-endpoint = <&mdss_intf5_out>;
-
- link-frequencies = /bits/ 64 <8100000000>;
};
};
@@ -4221,6 +4221,48 @@
#clock-cells = <0>;
};
+ spmi: arbiter@c400000 {
+ compatible = "qcom,x1e80100-spmi-pmic-arb";
+ reg = <0 0x0c400000 0 0x3000>,
+ <0 0x0c500000 0 0x400000>,
+ <0 0x0c440000 0 0x80000>;
+ reg-names = "core", "chnls", "obsrvr";
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ spmi_bus0: spmi@c42d000 {
+ reg = <0 0x0c42d000 0 0x4000>,
+ <0 0x0c4c0000 0 0x10000>;
+ reg-names = "cnfg", "intr";
+
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ spmi_bus1: spmi@c432000 {
+ reg = <0 0x0c432000 0 0x4000>,
+ <0 0x0c4d0000 0 0x10000>;
+ reg-names = "cnfg", "intr";
+
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
tlmm: pinctrl@f100000 {
compatible = "qcom,x1e80100-tlmm";
diff --git a/dts/upstream/src/arm64/realtek/rtd129x.dtsi b/dts/upstream/src/arm64/realtek/rtd129x.dtsi
index 39aefe6..ba50e29 100644
--- a/dts/upstream/src/arm64/realtek/rtd129x.dtsi
+++ b/dts/upstream/src/arm64/realtek/rtd129x.dtsi
@@ -48,7 +48,7 @@
clock-output-names = "osc27M";
};
- soc {
+ soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/upstream/src/arm64/realtek/rtd139x.dtsi b/dts/upstream/src/arm64/realtek/rtd139x.dtsi
index a3c10ce..e8af391 100644
--- a/dts/upstream/src/arm64/realtek/rtd139x.dtsi
+++ b/dts/upstream/src/arm64/realtek/rtd139x.dtsi
@@ -47,7 +47,7 @@
clock-output-names = "osc27M";
};
- soc {
+ soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/upstream/src/arm64/realtek/rtd16xx.dtsi b/dts/upstream/src/arm64/realtek/rtd16xx.dtsi
index 34802cc..3a7f6e3 100644
--- a/dts/upstream/src/arm64/realtek/rtd16xx.dtsi
+++ b/dts/upstream/src/arm64/realtek/rtd16xx.dtsi
@@ -109,7 +109,7 @@
};
arm_pmu: pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>,
<&cpu3>, <&cpu4>, <&cpu5>;
@@ -127,7 +127,7 @@
#clock-cells = <0>;
};
- soc {
+ soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/upstream/src/arm64/renesas/r8a77970-eagle-function-expansion.dtso b/dts/upstream/src/arm64/renesas/r8a77970-eagle-function-expansion.dtso
new file mode 100644
index 0000000..3aa243c
--- /dev/null
+++ b/dts/upstream/src/arm64/renesas/r8a77970-eagle-function-expansion.dtso
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Eagle V3M Function expansion board.
+ *
+ * Copyright (C) 2024 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ /* CN4 */
+ /* Eagle: SW18 set to OFF */
+ cvbs-in-cn4 {
+ compatible = "composite-video-connector";
+ label = "CVBS IN CN4";
+
+ port {
+ cvbs_con: endpoint {
+ remote-endpoint = <&adv7482_ain7>;
+ };
+ };
+ };
+
+ /* CN2 */
+ /* Eagle: SW35 set 5, 6 and 8 to OFF */
+ hdmi-in-cn2 {
+ compatible = "hdmi-connector";
+ label = "HDMI IN CN2";
+ type = "a";
+
+ port {
+ hdmi_in_con2: endpoint {
+ remote-endpoint = <&adv7612_in>;
+ };
+ };
+ };
+
+ /* CN3 */
+ /* Eagle: SW18 set to OFF */
+ hdmi-in-cn3 {
+ compatible = "hdmi-connector";
+ label = "HDMI IN CN3";
+ type = "a";
+
+ port {
+ hdmi_in_con: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+};
+
+/* Disconnect MAX9286 GMSL I2C. */
+&i2c3 {
+ status = "disabled";
+};
+
+/* Connect expansion board I2C. */
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@27 {
+ compatible = "onnn,pca9654";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ vin0_adv7612_en {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "VIN0_ADV7612_ENn";
+ };
+ };
+
+ hdmi-decoder@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>, <0x50>, <0x52>, <0x54>, <0x56>, <0x58>;
+ reg-names = "main", "afe", "rep", "edid", "hdmi", "cp";
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ default-input = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_in_con2>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ adv7612_out: endpoint {
+ remote-endpoint = <&vin0_in>;
+ };
+ };
+ };
+ };
+
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70 0x71 0x72 0x73 0x74 0x75
+ 0x60 0x61 0x62 0x63 0x64 0x65>;
+ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+ "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
+ interrupt-parent = <&gpio3>;
+ interrupts = <03 IRQ_TYPE_LEVEL_LOW>, <04 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "intrq1", "intrq2";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
+ };
+
+ port@a {
+ reg = <10>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+ };
+
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
+ };
+};
+
+&pfc {
+ vin0_pins_parallel: vin0 {
+ groups = "vin0_data12", "vin0_sync", "vin0_clk", "vin0_clkenb";
+ function = "vin0";
+ };
+};
+
+&vin0 {
+ status = "okay";
+
+ pinctrl-0 = <&vin0_pins_parallel>;
+ pinctrl-names = "default";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vin0_in: endpoint {
+ pclk-sample = <0>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ remote-endpoint = <&adv7612_out>;
+ };
+ };
+ };
+};
+
+&vin1 {
+ status = "okay";
+};
+
+&vin2 {
+ status = "okay";
+};
+
+&vin3 {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts b/dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts
index abfda5c..bc65a7b 100644
--- a/dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts
+++ b/dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts
@@ -14,9 +14,9 @@
compatible = "renesas,s4sk", "renesas,r8a779f4", "renesas,r8a779f0";
aliases {
- serial0 = &hscif0;
- serial1 = &hscif1;
- eth0 = &rswitch;
+ serial0 = &hscif0;
+ serial1 = &hscif1;
+ ethernet0 = &rswitch;
};
chosen {
diff --git a/dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts b/dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
index bc8616a..cfbe8c8 100644
--- a/dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
+++ b/dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
@@ -18,11 +18,12 @@
aliases {
serial0 = &hscif0;
+ serial1 = &hscif2;
ethernet0 = &avb0;
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:921600n8";
};
@@ -90,6 +91,14 @@
status = "okay";
};
+&hscif2 {
+ pinctrl-0 = <&hscif2_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
@@ -144,7 +153,7 @@
};
&pfc {
- pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>;
pinctrl-names = "default";
avb0_pins: avb0 {
@@ -170,6 +179,11 @@
function = "hscif0";
};
+ hscif2_pins: hscif2 {
+ groups = "hscif2_data", "hscif2_ctrl";
+ function = "hscif2";
+ };
+
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
@@ -190,6 +204,11 @@
groups = "scif_clk";
function = "scif_clk";
};
+
+ scif_clk2_pins: scif-clk2 {
+ groups = "scif_clk2";
+ function = "scif_clk2";
+ };
};
&rpc {
@@ -228,3 +247,7 @@
&scif_clk {
clock-frequency = <24000000>;
};
+
+&scif_clk2 {
+ clock-frequency = <24000000>;
+};
diff --git a/dts/upstream/src/arm64/renesas/r8a779h0.dtsi b/dts/upstream/src/arm64/renesas/r8a779h0.dtsi
index 1188572..6d79102 100644
--- a/dts/upstream/src/arm64/renesas/r8a779h0.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a779h0.dtsi
@@ -144,13 +144,19 @@
method = "smc";
};
- /* External SCIF clock - to be overridden by boards that provide it */
+ /* External SCIF clocks - to be overridden by boards that provide them */
scif_clk: scif-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
+ scif_clk2: scif-clk2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -297,6 +303,76 @@
resets = <&cpg 917>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a779h0-cmt0",
+ "renesas,rcar-gen4-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 910>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a779h0-cmt1",
+ "renesas,rcar-gen4-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 911>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a779h0-cmt1",
+ "renesas,rcar-gen4-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 912>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a779h0-cmt1",
+ "renesas,rcar-gen4-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 913>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 913>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a779h0-cpg-mssr";
reg = <0 0xe6150000 0 0x4000>;
@@ -318,6 +394,106 @@
#power-domain-cells = <1>;
};
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a779h0-thermal";
+ reg = <0 0xe6198000 0 0x200>,
+ <0 0xe61a0000 0 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a779h0", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 611>;
+ };
+
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2";
+ clocks = <&cpg CPG_MOD 713>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 714>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 715>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 716>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a779h0", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg CPG_MOD 717>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779h0",
"renesas,rcar-gen4-i2c";
@@ -403,6 +579,57 @@
status = "disabled";
};
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a779h0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>,
+ <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a779h0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+ <&scif_clk2>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a779h0",
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+ <&dmac2 0x37>, <&dmac2 0x36>;
+ dma-names = "tx", "rx", "tx", "rx";
+ status = "disabled";
+ };
+
avb0: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a779h0",
"renesas,etheravb-rcar-gen4";
@@ -446,6 +673,7 @@
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
+ iommus = <&ipmmu_hc 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -547,6 +775,170 @@
status = "disabled";
};
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a779h0",
+ "renesas,rcar-gen4-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>,
+ <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a779h0",
+ "renesas,rcar-gen4-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>,
+ <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a779h0",
+ "renesas,rcar-gen4-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>,
+ <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+ <&dmac2 0x57>, <&dmac2 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a779h0",
+ "renesas,rcar-gen4-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>,
+ <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+ <&scif_clk2>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+ <&dmac2 0x59>, <&dmac2 0x58>;
+ dma-names = "tx", "rx", "tx", "rx";
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a779h0",
+ "renesas,rcar-gen4-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 618>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 618>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a779h0",
+ "renesas,rcar-gen4-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 619>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 619>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a779h0",
+ "renesas,rcar-gen4-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 620>;
+ dmas = <&dmac1 0x45>, <&dmac1 0x44>,
+ <&dmac2 0x45>, <&dmac2 0x44>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 620>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a779h0",
+ "renesas,rcar-gen4-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 621>;
+ dmas = <&dmac1 0x47>, <&dmac1 0x46>,
+ <&dmac2 0x47>, <&dmac2 0x46>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 621>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof4: spi@e6c20000 {
+ compatible = "renesas,msiof-r8a779h0",
+ "renesas,rcar-gen4-msiof";
+ reg = <0 0xe6c20000 0 0x0064>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ dmas = <&dmac1 0x49>, <&dmac1 0x48>,
+ <&dmac2 0x49>, <&dmac2 0x48>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof5: spi@e6c28000 {
+ compatible = "renesas,msiof-r8a779h0",
+ "renesas,rcar-gen4-msiof";
+ reg = <0 0xe6c28000 0 0x0064>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ dmas = <&dmac1 0x4b>, <&dmac1 0x4a>,
+ <&dmac2 0x4b>, <&dmac2 0x4a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
dmac1: dma-controller@e7350000 {
compatible = "renesas,dmac-r8a779h0",
"renesas,rcar-gen4-dmac";
@@ -580,6 +972,14 @@
resets = <&cpg 709>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
};
dmac2: dma-controller@e7351000 {
@@ -605,6 +1005,10 @@
resets = <&cpg 710>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+ <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+ <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+ <&ipmmu_ds0 22>, <&ipmmu_ds0 23>;
};
mmc0: mmc@ee140000 {
@@ -618,6 +1022,7 @@
power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
resets = <&cpg 706>;
max-frequency = <200000000>;
+ iommus = <&ipmmu_ds0 32>;
status = "disabled";
};
@@ -637,6 +1042,106 @@
status = "disabled";
};
+ ipmmu_rt0: iommu@ee480000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xee480000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_rt1: iommu@ee4c0000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xee4c0000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ds0: iommu@eed00000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeed00000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_hc: iommu@eed40000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeed40000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_C4>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ir: iommu@eed80000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeed80000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_C4>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vc: iommu@eedc0000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeedc0000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_C4>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_3dg: iommu@eee00000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeee00000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_C4>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi0: iommu@eee80000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeee80000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_C4>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi1: iommu@eeec0000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeeec0000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_C4>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip0: iommu@eef00000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeef00000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm>;
+ power-domains = <&sysc R8A779H0_PD_C4>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: iommu@eefc0000 {
+ compatible = "renesas,ipmmu-r8a779h0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeefc0000 0 0x20000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
gic: interrupt-controller@f1000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
@@ -653,6 +1158,36 @@
};
};
+ thermal-zones {
+ sensor_thermal_cr52: sensor1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal_ca76: sensor2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
diff --git a/dts/upstream/src/arm64/renesas/r9a07g043.dtsi b/dts/upstream/src/arm64/renesas/r9a07g043.dtsi
index 8721f4c..6212ee5 100644
--- a/dts/upstream/src/arm64/renesas/r9a07g043.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a07g043.dtsi
@@ -598,6 +598,7 @@
gpio-ranges = <&pinctrl 0 0 152>;
#interrupt-cells = <2>;
interrupt-controller;
+ interrupt-parent = <&irqc>;
clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>;
power-domains = <&cpg>;
resets = <&cpg R9A07G043_GPIO_RSTN>,
@@ -812,7 +813,7 @@
hsusb: usb@11c60000 {
compatible = "renesas,usbhs-r9a07g043",
- "renesas,rza2-usbhs";
+ "renesas,rzg2l-usbhs";
reg = <0 0x11c60000 0 0x10000>;
interrupts = <SOC_PERIPHERAL_IRQ(100) IRQ_TYPE_EDGE_RISING>,
<SOC_PERIPHERAL_IRQ(101) IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/renesas/r9a07g043u.dtsi b/dts/upstream/src/arm64/renesas/r9a07g043u.dtsi
index 964b0a4..165bfcf 100644
--- a/dts/upstream/src/arm64/renesas/r9a07g043u.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a07g043u.dtsi
@@ -54,10 +54,6 @@
};
};
-&pinctrl {
- interrupt-parent = <&irqc>;
-};
-
&soc {
interrupt-parent = <&gic>;
diff --git a/dts/upstream/src/arm64/renesas/r9a07g044.dtsi b/dts/upstream/src/arm64/renesas/r9a07g044.dtsi
index 9f00b75..88634ae 100644
--- a/dts/upstream/src/arm64/renesas/r9a07g044.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a07g044.dtsi
@@ -1217,7 +1217,7 @@
hsusb: usb@11c60000 {
compatible = "renesas,usbhs-r9a07g044",
- "renesas,rza2-usbhs";
+ "renesas,rzg2l-usbhs";
reg = <0 0x11c60000 0 0x10000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/renesas/r9a07g054.dtsi b/dts/upstream/src/arm64/renesas/r9a07g054.dtsi
index 53d8905..e89bfe4 100644
--- a/dts/upstream/src/arm64/renesas/r9a07g054.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a07g054.dtsi
@@ -1225,7 +1225,7 @@
hsusb: usb@11c60000 {
compatible = "renesas,usbhs-r9a07g054",
- "renesas,rza2-usbhs";
+ "renesas,rzg2l-usbhs";
reg = <0 0x11c60000 0 0x10000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/renesas/rzg2ul-smarc.dtsi b/dts/upstream/src/arm64/renesas/rzg2ul-smarc.dtsi
index de59099..4338609 100644
--- a/dts/upstream/src/arm64/renesas/rzg2ul-smarc.dtsi
+++ b/dts/upstream/src/arm64/renesas/rzg2ul-smarc.dtsi
@@ -5,6 +5,7 @@
* Copyright (C) 2022 Renesas Electronics Corp.
*/
+#include <dt-bindings/gpio/gpio.h>
#include "rzg2ul-smarc-pinfunction.dtsi"
#include "rz-smarc-common.dtsi"
@@ -23,6 +24,63 @@
&i2c0 {
clock-frequency = <400000>;
+ da9062: pmic@58 {
+ compatible = "dlg,da9062";
+ reg = <0x58>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio {
+ compatible = "dlg,da9062-gpio";
+ };
+
+ onkey {
+ compatible = "dlg,da9062-onkey";
+ };
+
+ pmic-good-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PMIC_PGOOD";
+ };
+
+ rtc {
+ compatible = "dlg,da9062-rtc";
+ };
+
+ sd0-pwr-sel-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "SD0_PWR_SEL";
+ };
+
+ sd1-pwr-sel-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "SD1_PWR_SEL";
+ };
+
+ sw-et0-en-hog {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "SW_ET0_EN#";
+ };
+
+ thermal {
+ compatible = "dlg,da9062-thermal";
+ status = "disabled";
+ };
+
+ watchdog {
+ compatible = "dlg,da9062-watchdog";
+ status = "disabled";
+ };
+ };
+
versa3: clock-generator@68 {
compatible = "renesas,5p35023";
reg = <0x68>;
diff --git a/dts/upstream/src/arm64/renesas/rzg3s-smarc-som.dtsi b/dts/upstream/src/arm64/renesas/rzg3s-smarc-som.dtsi
index acac466..8a3d302 100644
--- a/dts/upstream/src/arm64/renesas/rzg3s-smarc-som.dtsi
+++ b/dts/upstream/src/arm64/renesas/rzg3s-smarc-som.dtsi
@@ -25,7 +25,7 @@
* SW_OFF - SD2 is connected to SoC
* SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
*/
-#define SW_CONFIG2 SW_ON
+#define SW_CONFIG2 SW_OFF
#define SW_CONFIG3 SW_ON
/ {
@@ -36,8 +36,8 @@
#if SW_CONFIG3 == SW_OFF
mmc2 = &sdhi2;
#else
- eth0 = &eth0;
- eth1 = &eth1;
+ ethernet0 = &eth0;
+ ethernet1 = &eth1;
#endif
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts b/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
index b47fe02..079101c 100644
--- a/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
@@ -5,6 +5,8 @@
*/
/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
#include "rk3308.dtsi"
/ {
@@ -24,17 +26,21 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+ pinctrl-0 = <&green_led>, <&heartbeat_led>;
green-led {
+ color = <LED_COLOR_ID_GREEN>;
default-state = "on";
+ function = LED_FUNCTION_POWER;
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
label = "rockpis:green:power";
linux,default-trigger = "default-on";
};
blue-led {
+ color = <LED_COLOR_ID_BLUE>;
default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "rockpis:blue:user";
linux,default-trigger = "heartbeat";
@@ -126,10 +132,12 @@
};
&emmc {
- bus-width = <4>;
cap-mmc-highspeed;
- mmc-hs200-1_8v;
+ cap-sd-highspeed;
+ no-sdio;
non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
vmmc-supply = <&vcc_io>;
status = "okay";
};
@@ -214,11 +222,11 @@
pinctrl-0 = <&rtc_32k>;
leds {
- green_led_gio: green-led-gpio {
+ green_led: green-led {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- heartbeat_led_gpio: heartbeat-led-gpio {
+ heartbeat_led: heartbeat-led {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3308.dtsi b/dts/upstream/src/arm64/rockchip/rk3308.dtsi
index cfc0a87..c00da15 100644
--- a/dts/upstream/src/arm64/rockchip/rk3308.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3308.dtsi
@@ -578,6 +578,48 @@
#dma-cells = <1>;
};
+ /*
+ * - can be clock producer or consumer
+ * - up to 8 capture channels and 2 playback channels
+ * - connected internally to audio codec
+ */
+ i2s_8ch_2: i2s@ff320000 {
+ compatible = "rockchip,rk3308-i2s-tdm";
+ reg = <0x0 0xff320000 0x0 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ clocks = <&cru SCLK_I2S2_8CH_TX>,
+ <&cru SCLK_I2S2_8CH_RX>,
+ <&cru HCLK_I2S2_8CH>;
+ dmas = <&dmac1 5>, <&dmac1 4>;
+ dma-names = "rx", "tx";
+ resets = <&cru SRST_I2S2_8CH_TX_M>, <&cru SRST_I2S2_8CH_RX_M>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ /*
+ * - can be clock consumer only
+ * - up to 4 capture channels, no playback
+ * - connected internally to audio codec
+ */
+ i2s_8ch_3: i2s@ff330000 {
+ compatible = "rockchip,rk3308-i2s-tdm";
+ reg = <0x0 0xff330000 0x0 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ clocks = <&cru SCLK_I2S3_8CH_TX>,
+ <&cru SCLK_I2S3_8CH_RX>,
+ <&cru HCLK_I2S3_8CH>;
+ dmas = <&dmac1 7>;
+ dma-names = "rx";
+ resets = <&cru SRST_I2S3_8CH_TX_M>, <&cru SRST_I2S3_8CH_RX_M>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
i2s_2ch_0: i2s@ff350000 {
compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff350000 0x0 0x1000>;
@@ -761,6 +803,20 @@
assigned-clock-rates = <32768>;
};
+ codec: codec@ff560000 {
+ compatible = "rockchip,rk3308-codec";
+ reg = <0x0 0xff560000 0x0 0x10000>;
+ rockchip,grf = <&grf>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ clocks = <&cru SCLK_I2S2_8CH_TX_OUT>,
+ <&cru SCLK_I2S2_8CH_RX_OUT>,
+ <&cru PCLK_ACODEC>;
+ reset-names = "codec";
+ resets = <&cru SRST_ACODEC_P>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@ff580000 {
compatible = "arm,gic-400";
reg = <0x0 0xff581000 0x0 0x1000>,
diff --git a/dts/upstream/src/arm64/rockchip/rk3326-gameforce-chi.dts b/dts/upstream/src/arm64/rockchip/rk3326-gameforce-chi.dts
new file mode 100644
index 0000000..579261b
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3326-gameforce-chi.dts
@@ -0,0 +1,809 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Chris Morgan <macromorgan@hotmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+ model = "GameForce Chi";
+ compatible = "gameforce,chi", "rockchip,rk3326";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ adc_joystick: adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&saradc 0>,
+ <&saradc 1>;
+ poll-interval = <100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <850 175>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <10>;
+ abs-fuzz = <10>;
+ abs-range = <800 190>;
+ linux,code = <ABS_X>;
+ };
+ };
+
+ adc_keys: adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 2>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <60>;
+
+ button-1 {
+ label = "HAPPY1";
+ linux,code = <BTN_TRIGGER_HAPPY1>;
+ press-threshold-microvolt = <15000>;
+ };
+
+ button-2 {
+ label = "HAPPY2";
+ linux,code = <BTN_TRIGGER_HAPPY2>;
+ press-threshold-microvolt = <300000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc_bl>;
+ pwms = <&pwm1 0 25000 0>;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3000000>;
+ charge-term-current-microamp = <300000>;
+ constant-charge-current-max-microamp = <1500000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <180000>;
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4106000 100>, <4071000 95>, <4018000 90>, <3975000 85>,
+ <3946000 80>, <3908000 75>, <3877000 70>, <3853000 65>,
+ <3834000 60>, <3816000 55>, <3802000 50>, <3788000 45>,
+ <3774000 40>, <3760000 35>, <3748000 30>, <3735000 25>,
+ <3718000 20>, <3697000 15>, <3685000 10>, <3625000 5>,
+ <3400000 0>;
+ voltage-max-design-microvolt = <4250000>;
+ voltage-min-design-microvolt = <3400000>;
+ };
+
+ gpio_leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ red_led: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ };
+
+ green_led: led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue_led: led-2 {
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
+ };
+
+ white_led: led-3 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ chg_led: led-4 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_CHARGING;
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+ };
+
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&btn_pins_ctrl>;
+ pinctrl-names = "default";
+
+ button-a {
+ gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
+ label = "EAST";
+ linux,code = <BTN_EAST>;
+ };
+
+ button-b {
+ gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ label = "SOUTH";
+ linux,code = <BTN_SOUTH>;
+ };
+
+ button-down {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>;
+ };
+
+ button-home {
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "HOME";
+ linux,code = <BTN_MODE>;
+ };
+
+ button-l1 {
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "TL";
+ linux,code = <BTN_TL>;
+ };
+
+ button-l2 {
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "TL2";
+ linux,code = <BTN_TL2>;
+ };
+
+ button-left {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>;
+ };
+
+ button-r1 {
+ gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "TR";
+ linux,code = <BTN_TR>;
+ };
+
+ button-r2 {
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "TR2";
+ linux,code = <BTN_TR2>;
+ };
+
+ button-right {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>;
+ };
+
+ button-select {
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "SELECT";
+ linux,code = <BTN_SELECT>;
+ };
+
+ button-start {
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "START";
+ linux,code = <BTN_START>;
+ };
+
+ button-up {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "DPAD-UP";
+ linux,code = <BTN_DPAD_UP>;
+ };
+
+ button-x {
+ gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+ label = "NORTH";
+ linux,code = <BTN_NORTH>;
+ };
+
+ button-y {
+ gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "WEST";
+ linux,code = <BTN_WEST>;
+ };
+ };
+
+ multi-led {
+ compatible = "leds-group-multicolor";
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ leds = <&red_led>, <&green_led>, <&blue_led>;
+ };
+
+ spk_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&spk_amp_enable_h>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ pinctrl-0 = <&hp_det>;
+ pinctrl-names = "default";
+ simple-audio-card,name = "rk817_ext";
+ simple-audio-card,aux-devs = <&spk_amp>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones",
+ "Speaker", "Internal Speakers";
+ simple-audio-card,routing =
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Internal Speakers", "Speaker Amp OUTL",
+ "Internal Speakers", "Speaker Amp OUTR",
+ "Speaker Amp INL", "HPOL",
+ "Speaker Amp INR", "HPOR";
+ simple-audio-card,pin-switches = "Internal Speakers";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_2ch>;
+ };
+ };
+
+ vibrator_left: pwm-vibrator-l {
+ compatible = "pwm-vibrator";
+ pwm-names = "enable";
+ pwms = <&pwm4 0 25000 0>;
+ };
+
+ vibrator_right: pwm-vibrator-r {
+ compatible = "pwm-vibrator";
+ pwm-names = "enable";
+ pwms = <&pwm5 0 25000 0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk817 1>;
+ clock-names = "ext_clock";
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+ };
+
+ vccsys: vccsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v8_sys";
+ regulator-always-on;
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi {
+ status = "okay";
+
+ internal_display: panel@0 {
+ reg = <0>;
+ compatible = "gameforce,chi-panel";
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_lcd>;
+ vcc-supply = <&vcc_lcd>;
+ reset-gpios = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+
+ ports {
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <16>;
+ i2c-scl-rising-time-ns = <280>;
+ status = "okay";
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ #clock-cells = <1>;
+ clock-names = "mclk";
+ clock-output-names = "rk808-clkout1", "xin32k";
+ clocks = <&cru SCLK_I2S1_OUT>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+ pinctrl-names = "default";
+ #sound-dai-cells = <0>;
+ system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vccsys>;
+ vcc2-supply = <&vccsys>;
+ vcc3-supply = <&vccsys>;
+ vcc4-supply = <&vccsys>;
+ vcc5-supply = <&vccsys>;
+ vcc6-supply = <&vccsys>;
+ vcc7-supply = <&vcc_3v0>;
+ vcc8-supply = <&vccsys>;
+ vcc9-supply = <&dcdc_boost>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1150000>;
+ regulator-min-microvolt = <950000>;
+ regulator-name = "vdd_logic";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <950000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v0: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc_3v0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-name = "vdd_1v0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_3v0_pmu: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc_3v0_pmu";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vccio_sd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG6 {
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_bl: LDO_REG7 {
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_bl";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_lcd: LDO_REG8 {
+ regulator-max-microvolt = <2800000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-name = "vcc_lcd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <2800000>;
+ };
+ };
+
+ vcc_wifi: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_wifi";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ dcdc_boost: BOOST {
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "dcdc_boost";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ otg_switch: OTG_SWITCH {
+ regulator-name = "otg_switch";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+
+ rk817_charger: charger {
+ monitored-battery = <&battery>;
+ rockchip,resistor-sense-micro-ohms = <10000>;
+ rockchip,sleep-enter-current-microamp = <300000>;
+ rockchip,sleep-filter-current-microamp = <100000>;
+ };
+ };
+};
+
+&i2s1_2ch {
+ status = "okay";
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_3v0_pmu>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_3v0>;
+ vccio4-supply = <&vcc_3v0>;
+ vccio5-supply = <&vcc_3v0>;
+ vccio6-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ bluetooth-pins {
+ bt_reset: bt-reset {
+ rockchip,pins =
+ <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_dev: bt-wake-dev {
+ rockchip,pins =
+ <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins =
+ <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-btns {
+ btn_pins_ctrl: btn-pins-ctrl {
+ rockchip,pins =
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-leds {
+ led_pins: led-pins {
+ rockchip,pins =
+ <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins =
+ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins =
+ <0 RK_PA4 2 &pcfg_pull_none>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins =
+ <0 RK_PA4 1 &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ speaker {
+ spk_amp_enable_h: spk-amp-enable-h {
+ rockchip,pins =
+ <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc_1v8>;
+ pmuio2-supply = <&vcc_3v0_pmu>;
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&pwm5 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ non-removable;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ no-sdio;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sfc {
+ #address-cells = <1>;
+ pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+ pinctrl-names = "default";
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+/*
+ * The right ADC joystick exists connected to an unknown ADC
+ * controller which can be communicated with via uart0. This ADC device
+ * is an 8-pin SOIC with no markings located right next to the left ADC
+ * joystick ribbon cable. The pinout for this ADC controller appears to
+ * be pin 1 - VCC (2.8v), pin 2 - 1.8v (clk maybe?), pin 3 - GPIO 10,
+ * pin 4 - unknown, pin 5 - unknown, pin 6 - analog in, pin 7 - analog in,
+ * pin 8 - ground. There is currently a userspace UART driver for this
+ * device but it only works with the BSP joystick driver.
+ */
+&uart0 {
+ status = "okay";
+};
+
+/*
+ * Bluetooth was not working on BSP and is not currently working on
+ * mainline due to missing firmware. Bluetooth requires removal of DMA
+ * or else it will not probe.
+ */
+&uart1 {
+ /delete-property/ dma-names;
+ /delete-property/ dmas;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth: bluetooth {
+ compatible = "realtek,rtl8723ds-bt";
+ device-wake-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
+ pinctrl-names = "default";
+ };
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m1_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts b/dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts
index f09d60b..a608a21 100644
--- a/dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts
@@ -241,8 +241,8 @@
rk805: pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
- interrupt-parent = <&gpio2>;
- interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk805-clkout2";
gpio-controller;
diff --git a/dts/upstream/src/arm64/rockchip/rk3328.dtsi b/dts/upstream/src/arm64/rockchip/rk3328.dtsi
index b6f0450..07dcc94 100644
--- a/dts/upstream/src/arm64/rockchip/rk3328.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3328.dtsi
@@ -46,8 +46,14 @@
cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
- next-level-cache = <&l2>;
operating-points-v2 = <&cpu0_opp_table>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu1: cpu@1 {
@@ -59,8 +65,14 @@
cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
- next-level-cache = <&l2>;
operating-points-v2 = <&cpu0_opp_table>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu2: cpu@2 {
@@ -72,8 +84,14 @@
cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
- next-level-cache = <&l2>;
operating-points-v2 = <&cpu0_opp_table>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu3: cpu@3 {
@@ -85,8 +103,14 @@
cpu-idle-states = <&CPU_SLEEP>;
dynamic-power-coefficient = <120>;
enable-method = "psci";
- next-level-cache = <&l2>;
operating-points-v2 = <&cpu0_opp_table>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
idle-states {
@@ -102,10 +126,13 @@
};
};
- l2: l2-cache0 {
+ l2_cache: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
+ cache-size = <0x40000>;
+ cache-line-size = <64>;
+ cache-sets = <256>;
};
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3368-evb.dtsi b/dts/upstream/src/arm64/rockchip/rk3368-evb.dtsi
index b48b98c..e5c0dbf 100644
--- a/dts/upstream/src/arm64/rockchip/rk3368-evb.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3368-evb.dtsi
@@ -17,7 +17,7 @@
stdout-path = "serial2:115200n8";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/dts/upstream/src/arm64/rockchip/rk3368-orion-r68-meta.dts
index dcee2e2..23ae2d9 100644
--- a/dts/upstream/src/arm64/rockchip/rk3368-orion-r68-meta.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3368-orion-r68-meta.dts
@@ -21,7 +21,7 @@
stdout-path = "serial2:115200n8";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3368-r88.dts b/dts/upstream/src/arm64/rockchip/rk3368-r88.dts
index b16b7ca..7f14206 100644
--- a/dts/upstream/src/arm64/rockchip/rk3368-r88.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3368-r88.dts
@@ -21,7 +21,7 @@
stdout-path = "serial2:115200n8";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3368.dtsi b/dts/upstream/src/arm64/rockchip/rk3368.dtsi
index 62af0cb..73618df 100644
--- a/dts/upstream/src/arm64/rockchip/rk3368.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3368.dtsi
@@ -141,7 +141,7 @@
};
arm-pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -793,6 +793,7 @@
dma-names = "tx";
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx>;
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -804,6 +805,7 @@
clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
dmas = <&dmac_bus 6>, <&dmac_bus 7>;
dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -817,6 +819,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s_8ch_bus>;
+ #sound-dai-cells = <0>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3399-gru.dtsi b/dts/upstream/src/arm64/rockchip/rk3399-gru.dtsi
index 789fd0d..3cd63d1 100644
--- a/dts/upstream/src/arm64/rockchip/rk3399-gru.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3399-gru.dtsi
@@ -450,7 +450,7 @@ ap_i2c_audio: &i2c8 {
dlg,btn-cfg = <50>;
dlg,mic-det-thr = <500>;
dlg,jack-ins-deb = <20>;
- dlg,jack-det-rate = "32ms_64ms";
+ dlg,jack-det-rate = "32_64";
dlg,jack-rem-deb = <1>;
dlg,a-d-btn-thr = <0xa>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts b/dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts
index 61f3fec..e5709c7 100644
--- a/dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts
@@ -16,7 +16,7 @@
#include "rk3399-opp.dtsi"
/ {
- model = "Pine64 PinePhonePro";
+ model = "Pine64 PinePhone Pro";
compatible = "pine64,pinephone-pro", "rockchip,rk3399";
chassis-type = "handset";
diff --git a/dts/upstream/src/arm64/rockchip/rk3399-rock-4c-plus.dts b/dts/upstream/src/arm64/rockchip/rk3399-rock-4c-plus.dts
index 7baf9d1..972aea8 100644
--- a/dts/upstream/src/arm64/rockchip/rk3399-rock-4c-plus.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3399-rock-4c-plus.dts
@@ -151,6 +151,7 @@
};
&emmc_phy {
+ rockchip,enable-strobe-pulldown;
status = "okay";
};
@@ -549,7 +550,8 @@
&sdhci {
max-frequency = <150000000>;
bus-width = <8>;
- mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3399-rock-pi-4.dtsi b/dts/upstream/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
index 281a121..b9d6284 100644
--- a/dts/upstream/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
@@ -194,6 +194,7 @@
};
&emmc_phy {
+ rockchip,enable-strobe-pulldown;
status = "okay";
};
@@ -648,7 +649,8 @@
&sdhci {
max-frequency = <150000000>;
bus-width = <8>;
- mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353p.dts b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353p.dts
index 8aa93c6..a73cf30 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353p.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353p.dts
@@ -8,7 +8,7 @@
#include "rk3566-anbernic-rg353x.dtsi"
/ {
- model = "RG353P";
+ model = "Anbernic RG353P";
compatible = "anbernic,rg353p", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts
index b211973..ca5284e 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353ps.dts
@@ -8,7 +8,7 @@
#include "rk3566-anbernic-rg353x.dtsi"
/ {
- model = "RG353PS";
+ model = "Anbernic RG353PS";
compatible = "anbernic,rg353ps", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353v.dts b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353v.dts
index f49ce29..e9954a3 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353v.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353v.dts
@@ -8,7 +8,7 @@
#include "rk3566-anbernic-rg353x.dtsi"
/ {
- model = "RG353V";
+ model = "Anbernic RG353V";
compatible = "anbernic,rg353v", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts
index a7dc462..90da438 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg353vs.dts
@@ -8,7 +8,7 @@
#include "rk3566-anbernic-rg353x.dtsi"
/ {
- model = "RG353VS";
+ model = "Anbernic RG353VS";
compatible = "anbernic,rg353vs", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg503.dts b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg503.dts
index 94e6dd6..74cf313 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg503.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rg503.dts
@@ -8,7 +8,7 @@
#include "rk3566-anbernic-rgxx3.dtsi"
/ {
- model = "RG503";
+ model = "Anbernic RG503";
compatible = "anbernic,rg503", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
index 18b8c2e..233eade 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -10,6 +10,8 @@
#include "rk3566.dtsi"
/ {
+ chassis-type = "handset";
+
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
@@ -623,9 +625,12 @@
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
non-removable;
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
pinctrl-names = "default";
+ sd-uhs-sdr50;
vmmc-supply = <&vcc_wifi>;
vqmmc-supply = <&vcca1v8_pmu>;
status = "okay";
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts b/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
index 1f567a1..952b1b2 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
@@ -8,7 +8,7 @@
#include "rk3566-powkiddy-rk2023.dtsi"
/ {
- model = "RGB30";
+ model = "Powkiddy RGB30";
compatible = "powkiddy,rgb30", "rockchip,rk3566";
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts b/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
index bc9933d..72890f7 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
@@ -8,7 +8,7 @@
#include "rk3566-powkiddy-rk2023.dtsi"
/ {
- model = "RK2023";
+ model = "Powkiddy RK2023";
compatible = "powkiddy,rk2023", "rockchip,rk3566";
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
index 3ab751a..bd33271 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
@@ -10,6 +10,8 @@
#include "rk3566.dtsi"
/ {
+ chassis-type = "handset";
+
aliases {
mmc1 = &sdmmc0;
mmc2 = &sdmmc1;
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-x55.dts b/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-x55.dts
index 4786b19..5a648db 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-x55.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-powkiddy-x55.dts
@@ -11,6 +11,7 @@
/ {
model = "Powkiddy x55";
+ chassis-type = "handset";
compatible = "powkiddy,x55", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts b/dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts
index 59843a7..0b191d8 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts
@@ -8,7 +8,7 @@
#include "rk3566.dtsi"
/ {
- model = "Pine64 RK3566 Quartz64-A Board";
+ model = "Pine64 Quartz64 Model A";
compatible = "pine64,quartz64-a", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts b/dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts
index 2d92713..b908ce0 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts
@@ -8,7 +8,7 @@
#include "rk3566.dtsi"
/ {
- model = "Pine64 RK3566 Quartz64-B Board";
+ model = "Pine64 Quartz64 Model B";
compatible = "pine64,quartz64-b", "rockchip,rk3566";
aliases {
@@ -289,7 +289,7 @@
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts b/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts
new file mode 100644
index 0000000..b242409
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+ model = "Radxa ROCK 3C";
+ compatible = "radxa,rock-3c", "rockchip,rk3566";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ mmc2 = &sdmmc1;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac1_clkin: external-gmac1-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac1_clkin";
+ #clock-cells = <0>;
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led2>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <5000000>;
+ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc5v_dcin: vcc5v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v_dcin>;
+ };
+
+ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb30_host_en>;
+ regulator-name = "vcc5v0_usb30_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_cam: vcc-cam-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_cam_en>;
+ regulator-name = "vcc_cam";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_mipi: vcc-mipi-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_mipi_en>;
+ regulator-name = "vcc_mipi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+ clock_in_out = "input";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_rgmii_bus
+ &gmac1m1_clkinout>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+ system-power-controller;
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "belling,bl24c16a", "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_h>;
+ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ bluetooth {
+ bt_reg_on_h: bt-reg-on-h {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_h: bt-wake-host-h {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_h: bt-host-wake-h {
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ cam {
+ vcc_cam_en: vcc_cam_en {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ display {
+ vcc_mipi_en: vcc_mipi_en {
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ user_led2: user-led2 {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_reset_h: pcie-reset-h {
+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake_h: wifi-host-wake-h {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcca1v8_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcca1v8_pmu>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr50;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vcca1v8_pmu>;
+ status = "okay";
+};
+
+&sfc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <120000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb30_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ phy-supply = <&vcc5v0_usb30_host>;
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_usb30_host>;
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-soquartz-blade.dts b/dts/upstream/src/arm64/rockchip/rk3566-soquartz-blade.dts
index fdbf1c7..fdbb4a6 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-soquartz-blade.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-soquartz-blade.dts
@@ -10,7 +10,7 @@
#include "rk3566-soquartz.dtsi"
/ {
- model = "PINE64 RK3566 SOQuartz on Blade carrier board";
+ model = "Pine64 SOQuartz on Blade carrier board";
compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-soquartz-cm4.dts b/dts/upstream/src/arm64/rockchip/rk3566-soquartz-cm4.dts
index 6ed3fa4..2b6f0df 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-soquartz-cm4.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-soquartz-cm4.dts
@@ -5,7 +5,7 @@
#include "rk3566-soquartz.dtsi"
/ {
- model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
+ model = "Pine64 SOQuartz on CM4-IO carrier board";
compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-soquartz-model-a.dts b/dts/upstream/src/arm64/rockchip/rk3566-soquartz-model-a.dts
index f2095df..9a6a632 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-soquartz-model-a.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-soquartz-model-a.dts
@@ -5,7 +5,7 @@
#include "rk3566-soquartz.dtsi"
/ {
- model = "PINE64 RK3566 SOQuartz on Model A carrier board";
+ model = "Pine64 SOQuartz on Model A carrier board";
compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi
index bfb7b95..dd4e9c1 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi
@@ -8,7 +8,7 @@
#include "rk3566.dtsi"
/ {
- model = "Pine64 RK3566 SoQuartz SOM";
+ model = "Pine64 SOQuartz system on module";
compatible = "pine64,soquartz", "rockchip,rk3566";
aliases {
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-mecsbc.dts b/dts/upstream/src/arm64/rockchip/rk3568-mecsbc.dts
new file mode 100644
index 0000000..c2dfffc
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3568-mecsbc.dts
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3568.dtsi"
+
+/ {
+ model = "Protonic MECSBC";
+ compatible = "prt,mecsbc", "rockchip,rk3568";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ tas2562-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Speaker";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tas2562>;
+ };
+ };
+
+ vdd_gpu: regulator-vdd-gpu {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <915000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-settling-time-up-us = <250>;
+ pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
+ };
+
+ p3v3: regulator-p3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ p1v8: regulator-p1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_sd: regulator-sd {
+ compatible = "regulator-gpio";
+ enable-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ regulator-name = "sdcard-gpio-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <1800000 0x1>, <3300000 0x0>;
+ };
+
+ vdd_npu: regulator-vdd-npu {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ regulator-name = "vdd_npu";
+ regulator-min-microvolt = <915000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-settling-time-up-us = <250>;
+ pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
+ };
+};
+
+&combphy0 {
+ status = "okay";
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ clock_in_out = "output";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_clkinout
+ &gmac1m1_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&gpu_opp_table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <915000>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <915000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <915000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <920000>;
+ };
+
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <950000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2m0_xfer>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+ status = "okay";
+
+ tas2562: amplifier@4c {
+ compatible = "ti,tas2562";
+ reg = <0x4c>;
+ #sound-dai-cells = <0>;
+ shutdown-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tas2562>;
+ interrupts = <RK_PD1 IRQ_TYPE_LEVEL_LOW>;
+ ti,imon-slot-no = <0>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp1075";
+ reg = <0x48>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf85363";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "rtcic_32kout";
+ };
+};
+
+&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth_phy1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20m1_pins>;
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x2m1_pins>;
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&p3v3>;
+ status = "okay";
+};
+
+&pinctrl {
+ ethernet {
+ eth_phy1_rst: eth-phy1-rst {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ tas2562 {
+ pinctrl_tas2562: tas2562 {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&p3v3>;
+ pmuio2-supply = <&p3v3>;
+ vccio1-supply = <&p1v8>;
+ vccio2-supply = <&p1v8>;
+ vccio3-supply = <&vcc_sd>;
+ vccio4-supply = <&p1v8>;
+ vccio5-supply = <&p3v3>;
+ vccio6-supply = <&p1v8>;
+ vccio7-supply = <&p3v3>;
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1m0_pins>;
+};
+
+&pwm2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m0_pins>;
+};
+
+&saradc {
+ vref-supply = <&p1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&p3v3>;
+ vqmmc-supply = <&p1v8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&p3v3>;
+ vqmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "host";
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts b/dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts
index a5e974e..ebdedea 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts
@@ -8,7 +8,7 @@
#include "rk3568.dtsi"
/ {
- model = "Radxa ROCK3 Model A";
+ model = "Radxa ROCK 3A";
compatible = "radxa,rock3a", "rockchip,rk3568";
aliases {
@@ -757,6 +757,20 @@
status = "okay";
};
+&sfc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <104000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-wolfvision-pf5-io-expander.dtso b/dts/upstream/src/arm64/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
new file mode 100644
index 0000000..ebcaeaf
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device tree overlay for the WolfVision PF5 IO Expander board.
+ *
+ * Copyright (C) 2024 WolfVision GmbH.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rk3568-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+ gmac0_clkin: external-gmac0-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ clock-output-names = "gmac0_clkin";
+ #clock-cells = <0>;
+ };
+
+ usb_host_vbus: usb-host-vbus-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_vbus_en>;
+ regulator-name = "usb_host_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v_in>;
+ };
+
+ vcc1v8_eth: vcc1v8-eth-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc1v8_eth_en>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "1v8_eth";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_eth: vcc3v3-eth-regulator {
+ compatible = "regulator-fixed";
+ enable-active-low;
+ gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc3v3_eth_enn>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "3v3_eth";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+};
+
+&gmac0 {
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>,
+ <&cru SCLK_GMAC0>;
+ assigned-clock-parents = <&cru SCLK_GMAC0_RMII_SPEED>,
+ <&gmac0_clkin>;
+ clock_in_out = "input";
+ phy-handle = <&dp83826>;
+ phy-mode = "rmii";
+ phy-supply = <&vcc3v3_eth>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_clkinout
+ &gmac0_rx_er
+ &gmac0_rx_bus2
+ &gmac0_tx_bus2>;
+ status = "okay";
+};
+
+&mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp83826: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth_wake_intn &eth_phy_rstn>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <2000>;
+ reset-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+};
+
+&pinctrl {
+ ethernet {
+ eth_wake_intn: eth-wake-intn-pinctrl {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ eth_phy_rstn: eth-phy-rstn-pinctrl {
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc1v8_eth_en: vcc1v8-eth-en-pinctrl {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc3v3_eth_enn: vcc3v3-eth-enn-pinctrl {
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb_host_vbus_en: usb-host-vbus-en-pinctrl {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&usb_host1_xhci {
+ maximum-speed = "high-speed";
+ phys = <&usb2phy0_host>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&usb_host_vbus>;
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-wolfvision-pf5.dts b/dts/upstream/src/arm64/rockchip/rk3568-wolfvision-pf5.dts
new file mode 100644
index 0000000..170b14f
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3568-wolfvision-pf5.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device tree for the WolfVision PF5 mainboard.
+ *
+ * Copyright (C) 2024 WolfVision GmbH.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/regulator/ti,tps62864.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+ model = "WolfVision PF5";
+ compatible = "wolfvision,rk3568-pf5", "rockchip,rk3568";
+
+ aliases {
+ ethernet0 = &gmac0;
+ mmc0 = &sdhci;
+ rtc0 = &pcf85623;
+ rtc1 = &rk809;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ hdmi_tx: hdmi-tx-connector {
+ compatible = "hdmi-connector";
+ hdmi-pwr-supply = <&hdmi_tx_5v>;
+ type = "a";
+
+ port {
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
+ hdmi_tx_5v: hdmi-tx-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_tx_5v_en>;
+ regulator-name = "hdmi_tx_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v_in>;
+ };
+
+ pdm_codec: pdm-codec {
+ compatible = "dmic-codec";
+ num-channels = <1>;
+ #sound-dai-cells = <0>;
+ };
+
+ pdm_sound: pdm-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "microphone";
+
+ simple-audio-card,cpu {
+ sound-dai = <&pdm>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&pdm_codec>;
+ };
+ };
+
+ vcc12v_cam: vcc12v-cam-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc12v_cam_en>;
+ regulator-name = "12v_cam";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc12v_in>;
+ };
+
+ vcc12v_in: vcc12v-in-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "12v_in";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v8_cam: vcc3v8-cam-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc3v8_cam_en>;
+ regulator-name = "3v8_cam";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ vin-supply = <&vcc5v_in>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v_in>;
+ };
+
+ vcc5v_in: vcc5v-in-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "5v_in";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_in>;
+ };
+};
+
+&combphy0 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vcc0v9_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vcc0v9_cpu>;
+};
+
+&gpu {
+ mali-supply = <&vcc0v9_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vcc0v9a_image>;
+ avdd-1v8-supply = <&vcc1v8a_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_tx_in>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ vcc1-supply = <&vcc5v_in>;
+ vcc2-supply = <&vcc5v_in>;
+ vcc3-supply = <&vcc5v_in>;
+ vcc4-supply = <&vcc5v_in>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc5v_in>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ wakeup-source;
+
+ regulators {
+ vcc0v9_logic: DCDC_REG1 {
+ regulator-name = "0v9_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9_gpu: DCDC_REG2 {
+ regulator-name = "0v9_gpu";
+ regulator-always-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v1_ddr4: DCDC_REG3 {
+ regulator-name = "1v1_ddr4";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc0v9_npu: DCDC_REG4 {
+ regulator-name = "0v9_npu";
+ regulator-always-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8: DCDC_REG5 {
+ regulator-name = "1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9a_image: LDO_REG1 {
+ regulator-name = "0v9a_image";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9a: LDO_REG2 {
+ regulator-name = "0v9a";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9a_pmu: LDO_REG3 {
+ regulator-name = "0v9a_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc3v3_acodec: LDO_REG4 {
+ regulator-name = "3v3_acodec";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: LDO_REG5 {
+ regulator-name = "3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc1v8a: LDO_REG7 {
+ regulator-name = "1v8a";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8a_pmu: LDO_REG8 {
+ regulator-name = "1v8a_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8a_image: LDO_REG9 {
+ regulator-name = "1v8a_image";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sw: SWITCH_REG1 {
+ regulator-name = "3v3_sw";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ regulator@42 {
+ compatible = "ti,tps62869";
+ reg = <0x42>;
+
+ regulators {
+ vcc0v9_cpu: SW {
+ regulator-name = "0v9_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <TPS62864_MODE_FPWM>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1150000>;
+ vin-supply = <&vcc5v_in>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ pcf85623: rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk32k_in>;
+ quartz-load-femtofarads = <12500>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m1_xfer>;
+};
+
+&pdm {
+ pinctrl-0 = <&pdmm0_clk
+ &pdmm0_sdi0>;
+ status = "okay";
+};
+
+&pinctrl {
+ cam {
+ vcc12v_cam_en: vcc12v-cam-en-pinctrl {
+ rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc3v8_cam_en: vcc3v8-cam-en-pinctrl {
+ rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hdmitx {
+ hdmi_tx_5v_en: hdmi-tx-5v-en-pinctrl {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l-pinctrl {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vcc3v3_acodec>;
+ vccio2-supply = <&vcc1v8>;
+ vccio3-supply = <&vcc3v3_sd>;
+ vccio4-supply = <&vcc1v8>;
+ vccio5-supply = <&vcc1v8>;
+ vccio6-supply = <&vcc3v3_sw>;
+ vccio7-supply = <&vcc3v3_sw>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc1v8a>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc3v3_sw>;
+ vqmmc-supply = <&vcc1v8>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "peripheral";
+ /* The following quirks are required since the bInterval is 1 and we
+ * handle steady ISOC streaming. See Usecase 3 in commit 729dcffd1ed3
+ * ("usb: dwc3: gadget: Add support for disabling U1 and U2 entries").
+ */
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ /*
+ * Without this quirk the available fifosize seems to be miscalculated
+ * in cases where many endpoints are used. In one particular situation
+ * 8 IN EPs and 3 OUT EPs where selected and lead to stalled transfers
+ * without the resize quirk.
+ */
+ tx-fifo-resize;
+
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP2>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk356x.dtsi b/dts/upstream/src/arm64/rockchip/rk356x.dtsi
index 92f96ec..d8543b5 100644
--- a/dts/upstream/src/arm64/rockchip/rk356x.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk356x.dtsi
@@ -57,6 +57,13 @@
#cooling-cells = <2>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l3_cache>;
};
cpu1: cpu@100 {
@@ -66,6 +73,13 @@
#cooling-cells = <2>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l3_cache>;
};
cpu2: cpu@200 {
@@ -75,6 +89,13 @@
#cooling-cells = <2>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l3_cache>;
};
cpu3: cpu@300 {
@@ -84,9 +105,29 @@
#cooling-cells = <2>;
enable-method = "psci";
operating-points-v2 = <&cpu0_opp_table>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l3_cache>;
};
};
+ /*
+ * There are no private per-core L2 caches, but only the
+ * L3 cache that appears to the CPU cores as L2 caches
+ */
+ l3_cache: l3-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
cpu0_opp_table: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
index 170501a..fde8b22 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
@@ -136,6 +136,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
index d9bf675..709d348 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
@@ -162,6 +162,8 @@
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ system-power-controller;
+
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi
index 963e880..7b13178 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi
@@ -68,6 +68,10 @@
status = "okay";
};
+&combphy2_psu {
+ status = "okay";
+};
+
&i2c6 {
status = "okay";
@@ -230,3 +234,7 @@
&usb_host1_ohci {
status = "okay";
};
+
+&usb_host2_xhci {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts b/dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts
index de30c26..7be2190 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
/ {
@@ -159,6 +160,18 @@
vin-supply = <&avcc_1v8_s0>;
};
+ vbus5v0_typec: vbus5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec5v_pwren>;
+ regulator-name = "vbus5v0_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -281,9 +294,68 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ sram-supply = <&vdd_gpu_mem_s0>;
+ status = "okay";
+};
+
&i2c2 {
status = "okay";
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus5v0_typec>;
+ status = "okay";
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
@@ -410,6 +482,16 @@
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ usb-typec {
+ typec5v_pwren: typec5v-pwren {
+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usbc0_int: usbc0-int {
+ rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
};
&pwm2 {
@@ -484,12 +566,16 @@
regulators {
vdd_gpu_s0: dcdc-reg1 {
+ /* regulator coupling requires always-on */
+ regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_gpu_s0";
regulator-enable-ramp-delay = <400>;
+ regulator-coupled-with = <&vdd_gpu_mem_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -534,12 +620,16 @@
};
vdd_gpu_mem_s0: dcdc-reg5 {
+ /* regulator coupling requires always-on */
+ regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <400>;
regulator-name = "vdd_gpu_mem_s0";
+ regulator-coupled-with = <&vdd_gpu_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -1041,6 +1131,22 @@
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
@@ -1079,3 +1185,58 @@
&usb_host1_ohci {
status = "okay";
};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};
+
+&usbdp_phy1 {
+ /*
+ * USBDP PHY1 is wired to a female USB3 Type-A connector. Additionally
+ * the differential pairs 2+3 and the aux channel are wired to a RTD2166,
+ * which converts the DP signal into VGA. This is exposed on the
+ * board via a female VGA connector.
+ */
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-fet3588-c.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-fet3588-c.dtsi
new file mode 100644
index 0000000..47e64d5
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-fet3588-c.dtsi
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3588.dtsi"
+
+/ {
+ compatible = "forlinx,fet3588-c", "rockchip,rk3588";
+
+ aliases {
+ mmc0 = &sdhci;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_rgb_b>;
+
+ io-led {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ pcie20_avdd0v85: pcie20-avdd0v85-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie20_avdd0v85";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ vin-supply = <&vdd_0v85_s0>;
+ };
+
+ pcie20_avdd1v8: pcie20-avdd1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie20_avdd1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&avcc_1v8_s0>;
+ };
+
+ pcie30_avdd0v75: pcie30-avdd0v75-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie30_avdd0v75";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ vin-supply = <&avdd_0v75_s0>;
+ };
+
+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie30_avdd1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&avcc_1v8_s0>;
+ };
+
+ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc4v0_sys: vcc4v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc4v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+ mem-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+ mem-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+ mem-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+ mem-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m2_xfer>;
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&pinctrl {
+ leds {
+ led_rgb_b: led-rgb-b {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
+};
+
+&spi2 {
+ status = "okay";
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ num-cs = <1>;
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ spi-max-frequency = <1000000>;
+ reg = <0x0>;
+
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+ system-power-controller;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts b/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts
index 678ed8b..31d2f89 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts
@@ -266,6 +266,11 @@
};
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-ok3588-c.dts b/dts/upstream/src/arm64/rockchip/rk3588-ok3588-c.dts
new file mode 100644
index 0000000..009566d
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-ok3588-c.dts
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3588-fet3588-c.dtsi"
+
+/ {
+ model = "Forlinx OK3588-C Board";
+ compatible = "forlinx,ok3588-c", "forlinx,fet3588-c", "rockchip,rk3588";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ mmc1 = &sdmmc;
+ };
+
+ adc-keys-0 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "Maskrom";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <400>;
+ };
+ };
+
+ adc-keys-1 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-volume-up {
+ label = "V+/Recovery";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <17000>;
+ };
+
+ button-volume-down {
+ label = "V-";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <417000>;
+ };
+
+ button-menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <890000>;
+ };
+
+ button-escape {
+ label = "ESC";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <1235000>;
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <0 95 145 195 255>;
+ fan-supply = <&vcc12v_dcin>;
+ pwms = <&pwm2 0 50000 0>;
+ #cooling-cells = <2>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,name = "RK3588 OK3588-C Audio";
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,pin-switches = "Headphones", "Speaker";
+ simple-audio-card,widgets =
+ "Headphones", "Headphones",
+ "Speaker", "Speaker",
+ "Microphone", "Internal Microphone",
+ "Microphone", "Headset Microphone";
+ simple-audio-card,routing =
+ "Headphones", "LHP",
+ "Headphones", "RHP",
+ "Speaker", "LSPK",
+ "Speaker", "RSPK",
+ "LMICP", "Headset Microphone",
+ "RMICP", "Internal Microphone";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&nau8822>;
+ };
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc1v8_sys: vcc1v8-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie2x1l0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie2x1l2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_pcie30: vcc3v3_pcie30-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie30";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+};
+
+&gmac0 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy0>;
+ phy-mode = "rgmii-rxid";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus>;
+ tx_delay = <0x44>;
+ rx_delay = <0x00>;
+ status = "okay";
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-rxid";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus>;
+ tx_delay = <0x44>;
+ rx_delay = <0x00>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ tca6424a: gpio@23 {
+ compatible = "ti,tca6424";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6424a_int>;
+ vcc-supply = <&vcc3v3_sys>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5m2_xfer>;
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ nau8822: audio-codec@1a {
+ compatible = "nuvoton,nau8822";
+ reg = <0x1a>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+};
+
+&mdio0 {
+ rgmii_phy0: ethernet-phy@1 {
+ /* RTL8211F */
+ compatible = "ethernet-phy-id001c.c916",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8211f_0_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@2 {
+ /* RTL8211F */
+ compatible = "ethernet-phy-id001c.c916",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0x2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8211f_1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie2x1l0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_rst>;
+ reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+ status = "okay";
+};
+
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_2_rst>;
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+ status = "okay";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3_rst>;
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie30>;
+ status = "okay";
+};
+
+&pinctrl {
+ pcie2 {
+ pcie2_0_rst: pcie2-0-rst {
+ rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_2_rst: pcie2-2-rst {
+ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie3 {
+ pcie3_rst: pcie3-rst {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtl8211f {
+ rtl8211f_0_rst: rtl8211f-0-rst {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ rtl8211f_1_rst: rtl8211f-1-rst {
+ rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ tca6424a {
+ tca6424a_int: tca6424a-int {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&avcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-orangepi-5-plus.dts b/dts/upstream/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
index 1a60442..e748714 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
@@ -444,6 +444,7 @@
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts b/dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts
index 22bbfbe..e80caa3 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts
@@ -13,7 +13,7 @@
#include "rk3588.dtsi"
/ {
- model = "PINE64 QuartzPro64";
+ model = "Pine64 QuartzPro64";
compatible = "pine64,quartzpro64", "rockchip,rk3588";
aliases {
@@ -285,6 +285,12 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ sram-supply = <&vdd_gpu_mem_s0>;
+ status = "okay";
+};
+
&i2c2 {
status = "okay";
@@ -429,6 +435,7 @@
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
@@ -492,11 +499,15 @@
regulators {
vdd_gpu_s0: dcdc-reg1 {
regulator-name = "vdd_gpu_s0";
+ /* regulator coupling requires always-on */
+ regulator-always-on;
regulator-boot-on;
regulator-enable-ramp-delay = <400>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
+ regulator-coupled-with = <&vdd_gpu_mem_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -546,11 +557,15 @@
vdd_gpu_mem_s0: dcdc-reg5 {
regulator-name = "vdd_gpu_mem_s0";
+ /* regulator coupling requires always-on */
+ regulator-always-on;
regulator-boot-on;
regulator-enable-ramp-delay = <400>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
+ regulator-coupled-with = <&vdd_gpu_s0>;
+ regulator-coupled-max-spread = <10000>;
regulator-state-mem {
regulator-off-in-suspend;
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts b/dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts
index 1fe8b2a..2e75126 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts
@@ -7,7 +7,7 @@
#include "rk3588.dtsi"
/ {
- model = "Radxa ROCK 5 Model B";
+ model = "Radxa ROCK 5B";
compatible = "radxa,rock-5b", "rockchip,rk3588";
aliases {
@@ -180,6 +180,11 @@
cpu-supply = <&vdd_cpu_lit_s0>;
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
@@ -378,6 +383,7 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
@@ -742,6 +748,14 @@
status = "okay";
};
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
@@ -761,6 +775,10 @@
status = "okay";
};
+&usbdp_phy1 {
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
@@ -777,6 +795,11 @@
status = "okay";
};
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host2_xhci {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi
index aebe1fe..615094b 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi
@@ -344,6 +344,11 @@
};
};
+&pwm0 {
+ pinctrl-0 = <&pwm0m1_pins>;
+ pinctrl-names = "default";
+};
+
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts b/dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts
index 7f4d7bb..074c316 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588s-coolpi-4b.dts
@@ -203,6 +203,11 @@
cpu-supply = <&vdd_cpu_big1_s0>;
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
@@ -283,9 +288,9 @@
pinctrl-0 = <&i2c7m0_xfer>;
status = "okay";
- es8316: audio-codec@11 {
+ es8316: audio-codec@10 {
compatible = "everest,es8316";
- reg = <0x11>;
+ reg = <0x10>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts b/dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
index a5b76e2..d8c50fd 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
@@ -316,7 +316,7 @@
pinctrl-names = "default";
vbus-supply = <&vbus5v0_typec>;
- connector {
+ usb_con: connector {
compatible = "usb-c-connector";
data-role = "dual";
label = "USB-C";
@@ -325,6 +325,32 @@
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
op-sink-microwatt = <1000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
};
};
@@ -788,6 +814,14 @@
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
@@ -839,6 +873,17 @@
status = "okay";
};
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ dwc3_0_role_switch: endpoint {
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
&usb_host1_ehci {
status = "okay";
};
@@ -850,3 +895,27 @@
&usb_host2_xhci {
status = "okay";
};
+
+&usbdp_phy0 {
+ orientation-switch;
+ mode-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-khadas-edge2.dts b/dts/upstream/src/arm64/rockchip/rk3588s-khadas-edge2.dts
index f53e993..dbddfc3 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588s-khadas-edge2.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588s-khadas-edge2.dts
@@ -3,7 +3,9 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/leds/common.h>
#include "rk3588s.dtsi"
/ {
@@ -12,11 +14,298 @@
aliases {
mmc0 = &sdhci;
+ mmc1 = &sdmmc;
};
chosen {
stdout-path = "serial2:1500000n8";
};
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-function {
+ label = "Function";
+ linux,code = <KEY_FN>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_receiver_pin>;
+ };
+
+ leds {
+ compatible = "pwm-leds";
+
+ red_led: led-0 {
+ label = "red_led";
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ linux,default-trigger = "none";
+ max-brightness = <255>;
+ pwms = <&pwm11 0 25000 0>;
+ };
+
+ green_led: led-1 {
+ label = "green_led";
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+ linux,default-trigger = "default-on";
+ max-brightness = <255>;
+ pwms = <&pwm14 0 25000 0>;
+ };
+
+ blue_led: led-2 {
+ label = "blue_led";
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ linux,default-trigger = "none";
+ max-brightness = <255>;
+ pwms = <&pwm15 0 25000 0>;
+ };
+ };
+
+ vcc3v3_pcie_wl: vcc3v3-pcie-wl-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_2_vcc3v3_en>;
+ regulator-name = "vcc3v3_pcie_wl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_3v3_sd: vdd-3v3-sd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_sd";
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ enable-active-high;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_sd_en>;
+ };
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ wakeup-source;
+ };
+};
+
+&pinctrl {
+ vdd_sd {
+ vdd_sd_en: vdd-sd-en {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie2 {
+ pcie2_2_rst: pcie2-2-rst {
+ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_2_vcc3v3_en: pcie2-2-vcc-en {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir-receiver {
+ ir_receiver_pin: ir-receiver-pin {
+ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wireless-bluetooth {
+ bt_reset_pin: bt-reset-pin {
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_pin: bt-wake-pin {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ bt_wake_host_irq: bt-wake-host-irq {
+ rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_2_rst>;
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie_wl>;
+ status = "okay";
+};
+
+&pwm11 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm11m1_pins>;
+ status = "okay";
+};
+
+&pwm14 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm14m1_pins>;
+ status = "okay";
+};
+
+&pwm15 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm15m1_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&avcc_1v8_s0>;
+ status = "okay";
};
&sdhci {
@@ -29,7 +318,403 @@
status = "okay";
};
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ no-mmc;
+ no-sdio;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vdd_3v3_sd>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <100000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&spi2 {
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <400>;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_log_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_vdenc_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd_ddr_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
+
+&uart9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host2_xhci {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts b/dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts
index 73700d7..feea6b2 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588s-orangepi-5.dts
@@ -6,6 +6,7 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"
/ {
@@ -146,6 +147,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
@@ -212,6 +218,56 @@
pinctrl-0 = <&i2c6m3_xfer>;
status = "okay";
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus_typec>;
+ status = "okay";
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_hs: endpoint {
+ remote-endpoint = <&usb_host0_xhci_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_ss: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ usbc0_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_sbu>;
+ };
+ };
+ };
+ };
+ };
+
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
@@ -625,6 +681,14 @@
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
@@ -646,6 +710,29 @@
status = "okay";
};
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_typec_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_ss>;
+ };
+
+ usbdp_phy0_typec_sbu: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_sbu>;
+ };
+ };
+};
+
&usb_host0_ehci {
status = "okay";
};
@@ -654,6 +741,18 @@
status = "okay";
};
+&usb_host0_xhci {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ usb_host0_xhci_drd_sw: endpoint {
+ remote-endpoint = <&usbc0_hs>;
+ };
+ };
+};
+
&usb_host1_ehci {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts b/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts
index 5c99636..3b9a349 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts
@@ -8,7 +8,7 @@
#include "rk3588s.dtsi"
/ {
- model = "Radxa ROCK 5 Model A";
+ model = "Radxa ROCK 5A";
compatible = "radxa,rock-5a", "rockchip,rk3588s";
aliases {
@@ -366,6 +366,7 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
@@ -393,6 +394,7 @@
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
+ system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
@@ -697,6 +699,14 @@
};
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
@@ -720,6 +730,11 @@
status = "okay";
};
+&usbdp_phy0 {
+ status = "okay";
+ rockchip,dp-lane-mux = <2 3>;
+};
+
&usb_host0_ehci {
status = "okay";
pinctrl-names = "default";
@@ -730,6 +745,11 @@
status = "okay";
};
+&usb_host0_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host1_ehci {
status = "okay";
};
diff --git a/dts/upstream/src/arm64/socionext/uniphier-ld11-global.dts b/dts/upstream/src/arm64/socionext/uniphier-ld11-global.dts
index da44a15..a251c43 100644
--- a/dts/upstream/src/arm64/socionext/uniphier-ld11-global.dts
+++ b/dts/upstream/src/arm64/socionext/uniphier-ld11-global.dts
@@ -111,7 +111,7 @@
&i2c0 {
status = "okay";
- tas5707a@1d {
+ audio-codec@1d {
compatible = "ti,tas5711";
reg = <0x1d>;
reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>;
@@ -124,7 +124,7 @@
PVDD_C-supply = <&amp_vcc_reg>;
PVDD_D-supply = <&amp_vcc_reg>;
- port@0 {
+ port {
tas_speaker: endpoint {
dai-format = "i2s";
remote-endpoint = <&i2s_hpcmout1>;
diff --git a/dts/upstream/src/arm64/socionext/uniphier-ld20-global.dts b/dts/upstream/src/arm64/socionext/uniphier-ld20-global.dts
index a01579c..79f6db2 100644
--- a/dts/upstream/src/arm64/socionext/uniphier-ld20-global.dts
+++ b/dts/upstream/src/arm64/socionext/uniphier-ld20-global.dts
@@ -111,7 +111,7 @@
&i2c0 {
status = "okay";
- tas5707@1b {
+ audio-codec@1b {
compatible = "ti,tas5711";
reg = <0x1b>;
reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>;
@@ -124,7 +124,7 @@
PVDD_C-supply = <&amp_vcc_reg>;
PVDD_D-supply = <&amp_vcc_reg>;
- port@0 {
+ port {
tas_speaker: endpoint {
dai-format = "i2s";
remote-endpoint = <&i2s_hpcmout1>;
diff --git a/dts/upstream/src/arm64/sprd/sc9860.dtsi b/dts/upstream/src/arm64/sprd/sc9860.dtsi
index e27eb3e..31952d3 100644
--- a/dts/upstream/src/arm64/sprd/sc9860.dtsi
+++ b/dts/upstream/src/arm64/sprd/sc9860.dtsi
@@ -113,7 +113,7 @@
};
};
- idle-states{
+ idle-states {
entry-method = "psci";
CORE_PD: core_pd {
@@ -135,18 +135,6 @@
};
};
- gic: interrupt-controller@12001000 {
- compatible = "arm,gic-400";
- reg = <0 0x12001000 0 0x1000>,
- <0 0x12002000 0 0x2000>,
- <0 0x12004000 0 0x2000>,
- <0 0x12006000 0 0x2000>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
- | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -165,7 +153,7 @@
};
pmu {
- compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
@@ -185,6 +173,18 @@
};
soc {
+ gic: interrupt-controller@12001000 {
+ compatible = "arm,gic-400";
+ reg = <0 0x12001000 0 0x1000>,
+ <0 0x12002000 0 0x2000>,
+ <0 0x12004000 0 0x2000>,
+ <0 0x12006000 0 0x2000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
pmu_gate: pmu-gate {
compatible = "sprd,sc9860-pmu-gate";
sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
@@ -207,7 +207,7 @@
#clock-cells = <1>;
};
- aon_prediv: aon-prediv {
+ aon_prediv: aon-prediv@402d0000 {
compatible = "sprd,sc9860-aon-prediv";
reg = <0 0x402d0000 0 0x400>;
clocks = <&ext_26m>, <&pll 0>,
@@ -684,33 +684,5 @@
};
};
};
-
- gpio-keys {
- compatible = "gpio-keys";
-
- key-volumedown {
- label = "Volume Down Key";
- linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <2>;
- wakeup-source;
- };
-
- key-volumeup {
- label = "Volume Up Key";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>;
- debounce-interval = <2>;
- wakeup-source;
- };
-
- key-power {
- label = "Power Key";
- linux,code = <KEY_POWER>;
- gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>;
- debounce-interval = <2>;
- wakeup-source;
- };
- };
};
};
diff --git a/dts/upstream/src/arm64/sprd/sc9863a.dtsi b/dts/upstream/src/arm64/sprd/sc9863a.dtsi
index 22d81ac..53e5b77 100644
--- a/dts/upstream/src/arm64/sprd/sc9863a.dtsi
+++ b/dts/upstream/src/arm64/sprd/sc9863a.dtsi
@@ -134,7 +134,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/sprd/sharkl3.dtsi b/dts/upstream/src/arm64/sprd/sharkl3.dtsi
index 206a4af..9b4ee0b 100644
--- a/dts/upstream/src/arm64/sprd/sharkl3.dtsi
+++ b/dts/upstream/src/arm64/sprd/sharkl3.dtsi
@@ -24,7 +24,7 @@
#size-cells = <1>;
ranges = <0 0 0x20e00000 0x4000>;
- apahb_gate: apahb-gate {
+ apahb_gate: apahb-gate@0 {
compatible = "sprd,sc9863a-apahb-gate";
reg = <0x0 0x1020>;
#clock-cells = <1>;
@@ -39,7 +39,7 @@
#size-cells = <1>;
ranges = <0 0 0x402b0000 0x4000>;
- pmu_gate: pmu-gate {
+ pmu_gate: pmu-gate@0 {
compatible = "sprd,sc9863a-pmu-gate";
reg = <0 0x1200>;
clocks = <&ext_26m>;
@@ -56,7 +56,7 @@
#size-cells = <1>;
ranges = <0 0 0x402e0000 0x4000>;
- aonapb_gate: aonapb-gate {
+ aonapb_gate: aonapb-gate@0 {
compatible = "sprd,sc9863a-aonapb-gate";
reg = <0 0x1100>;
#clock-cells = <1>;
@@ -71,7 +71,7 @@
#size-cells = <1>;
ranges = <0 0 0x40353000 0x3000>;
- pll: pll {
+ pll: pll@0 {
compatible = "sprd,sc9863a-pll";
reg = <0 0x100>;
clocks = <&ext_26m>;
@@ -88,7 +88,7 @@
#size-cells = <1>;
ranges = <0 0 0x40359000 0x3000>;
- mpll: mpll {
+ mpll: mpll@0 {
compatible = "sprd,sc9863a-mpll";
reg = <0 0x100>;
#clock-cells = <1>;
@@ -103,7 +103,7 @@
#size-cells = <1>;
ranges = <0 0 0x4035c000 0x3000>;
- rpll: rpll {
+ rpll: rpll@0 {
compatible = "sprd,sc9863a-rpll";
reg = <0 0x100>;
clocks = <&ext_26m>;
@@ -120,7 +120,7 @@
#size-cells = <1>;
ranges = <0 0 0x40363000 0x3000>;
- dpll: dpll {
+ dpll: dpll@0 {
compatible = "sprd,sc9863a-dpll";
reg = <0 0x100>;
#clock-cells = <1>;
@@ -135,7 +135,7 @@
#size-cells = <1>;
ranges = <0 0 0x60800000 0x3000>;
- mm_gate: mm-gate {
+ mm_gate: mm-gate@0 {
compatible = "sprd,sc9863a-mm-gate";
reg = <0 0x1100>;
#clock-cells = <1>;
@@ -150,7 +150,7 @@
#size-cells = <1>;
ranges = <0 0 0x71300000 0x4000>;
- apapb_gate: apapb-gate {
+ apapb_gate: apapb-gate@0 {
compatible = "sprd,sc9863a-apapb-gate";
reg = <0 0x1000>;
clocks = <&ext_26m>;
diff --git a/dts/upstream/src/arm64/sprd/sp9860g-1h10.dts b/dts/upstream/src/arm64/sprd/sp9860g-1h10.dts
index 6b95fd9..1ce3cbb 100644
--- a/dts/upstream/src/arm64/sprd/sp9860g-1h10.dts
+++ b/dts/upstream/src/arm64/sprd/sp9860g-1h10.dts
@@ -24,7 +24,7 @@
spi0 = &adi_bus;
};
- memory{
+ memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x60000000>,
<0x1 0x80000000 0 0x60000000>;
@@ -34,6 +34,34 @@
stdout-path = "serial1:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-volumedown {
+ label = "Volume Down Key";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <2>;
+ wakeup-source;
+ };
+
+ key-volumeup {
+ label = "Volume Up Key";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <2>;
+ wakeup-source;
+ };
+
+ key-power {
+ label = "Power Key";
+ linux,code = <KEY_POWER>;
+ gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <2>;
+ wakeup-source;
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
diff --git a/dts/upstream/src/arm64/sprd/whale2.dtsi b/dts/upstream/src/arm64/sprd/whale2.dtsi
index fece497..7068bfd 100644
--- a/dts/upstream/src/arm64/sprd/whale2.dtsi
+++ b/dts/upstream/src/arm64/sprd/whale2.dtsi
@@ -64,7 +64,7 @@
reg = <0 0x70b00000 0 0x40000>;
};
- ap-apb {
+ ap-apb@70000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi b/dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi
index 66791a9..7a82896 100644
--- a/dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi
+++ b/dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi
@@ -6,6 +6,23 @@
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
&pinctrl {
+ i2c2_pins_a: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, AF9)>, /* I2C2_SCL */
+ <STM32_PINMUX('B', 4, AF9)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_sleep_pins_a: i2c2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, ANALOG)>, /* I2C2_SCL */
+ <STM32_PINMUX('B', 4, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
@@ -60,6 +77,28 @@
};
};
+ spi3_pins_a: spi3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 7, AF1)>, /* SPI3_SCK */
+ <STM32_PINMUX('B', 8, AF1)>; /* SPI3_MOSI */
+ drive-push-pull;
+ bias-disable;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 10, AF1)>; /* SPI3_MISO */
+ bias-disable;
+ };
+ };
+
+ spi3_sleep_pins_a: spi3-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 7, ANALOG)>, /* SPI3_SCK */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* SPI3_MOSI */
+ <STM32_PINMUX('B', 10, ANALOG)>; /* SPI3_MISO */
+ };
+ };
+
usart2_pins_a: usart2-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
@@ -90,3 +129,46 @@
};
};
};
+
+&pinctrl_z {
+ i2c8_pins_a: i2c8-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF8)>, /* I2C8_SCL */
+ <STM32_PINMUX('Z', 3, AF8)>; /* I2C8_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c8_sleep_pins_a: i2c8-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C8_SCL */
+ <STM32_PINMUX('Z', 3, ANALOG)>; /* I2C8_SDA */
+ };
+ };
+};
+
+&pinctrl_z {
+ spi8_pins_a: spi8-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('Z', 2, AF3)>, /* SPI8_SCK */
+ <STM32_PINMUX('Z', 0, AF3)>; /* SPI8_MOSI */
+ drive-push-pull;
+ bias-disable;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('Z', 1, AF3)>; /* SPI8_MISO */
+ bias-disable;
+ };
+ };
+
+ spi8_sleep_pins_a: spi8-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('Z', 2, ANALOG)>, /* SPI8_SCK */
+ <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI8_MOSI */
+ <STM32_PINMUX('Z', 1, ANALOG)>; /* SPI8_MISO */
+ };
+ };
+};
diff --git a/dts/upstream/src/arm64/st/stm32mp251.dtsi b/dts/upstream/src/arm64/st/stm32mp251.dtsi
index 5dd4f35..dcd0656 100644
--- a/dts/upstream/src/arm64/st/stm32mp251.dtsi
+++ b/dts/upstream/src/arm64/st/stm32mp251.dtsi
@@ -3,7 +3,9 @@
* Copyright (C) STMicroelectronics 2023 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
+#include <dt-bindings/clock/st,stm32mp25-rcc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/st,stm32mp25-rcc.h>
/ {
#address-cells = <2>;
@@ -35,34 +37,16 @@
};
clocks {
- ck_flexgen_08: ck-flexgen-08 {
+ clk_dsi_txbyte: txbyteclk {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <100000000>;
+ clock-frequency = <0>;
};
- ck_flexgen_51: ck-flexgen-51 {
+ clk_rcbsec: clk-rcbsec {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <200000000>;
- };
-
- ck_icn_ls_mcu: ck-icn-ls-mcu {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- };
-
- ck_icn_p_vdec: ck-icn-p-vdec {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- };
-
- ck_icn_p_venc: ck-icn-p-venc {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
+ clock-frequency = <64000000>;
};
};
@@ -109,10 +93,10 @@
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&intc>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
always-on;
};
@@ -123,18 +107,220 @@
interrupt-parent = <&intc>;
ranges = <0x0 0x0 0x0 0x80000000>;
- rifsc: rifsc-bus@42080000 {
- compatible = "simple-bus";
+ rifsc: bus@42080000 {
+ compatible = "st,stm32mp25-rifsc", "simple-bus";
reg = <0x42080000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ #access-controller-cells = <1>;
ranges;
+ spi2: spi@400b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp25-spi";
+ reg = <0x400b0000 0x400>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_SPI2>;
+ resets = <&rcc SPI2_R>;
+ access-controllers = <&rifsc 23>;
+ status = "disabled";
+ };
+
+ spi3: spi@400c0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp25-spi";
+ reg = <0x400c0000 0x400>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_SPI3>;
+ resets = <&rcc SPI3_R>;
+ access-controllers = <&rifsc 24>;
+ status = "disabled";
+ };
+
usart2: serial@400e0000 {
compatible = "st,stm32h7-uart";
reg = <0x400e0000 0x400>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ck_flexgen_08>;
+ clocks = <&rcc CK_KER_USART2>;
+ access-controllers = <&rifsc 32>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@40120000 {
+ compatible = "st,stm32mp25-i2c";
+ reg = <0x40120000 0x400>;
+ interrupt-names = "event";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_I2C1>;
+ resets = <&rcc I2C1_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 41>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40130000 {
+ compatible = "st,stm32mp25-i2c";
+ reg = <0x40130000 0x400>;
+ interrupt-names = "event";
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_I2C2>;
+ resets = <&rcc I2C2_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 42>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40140000 {
+ compatible = "st,stm32mp25-i2c";
+ reg = <0x40140000 0x400>;
+ interrupt-names = "event";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_I2C3>;
+ resets = <&rcc I2C3_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 43>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@40150000 {
+ compatible = "st,stm32mp25-i2c";
+ reg = <0x40150000 0x400>;
+ interrupt-names = "event";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_I2C4>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 44>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@40160000 {
+ compatible = "st,stm32mp25-i2c";
+ reg = <0x40160000 0x400>;
+ interrupt-names = "event";
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_I2C5>;
+ resets = <&rcc I2C5_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 45>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@40170000 {
+ compatible = "st,stm32mp25-i2c";
+ reg = <0x40170000 0x400>;
+ interrupt-names = "event";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_I2C6>;
+ resets = <&rcc I2C6_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 46>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@40180000 {
+ compatible = "st,stm32mp25-i2c";
+ reg = <0x40180000 0x400>;
+ interrupt-names = "event";
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_I2C7>;
+ resets = <&rcc I2C7_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 47>;
+ status = "disabled";
+ };
+
+ spi1: spi@40230000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp25-spi";
+ reg = <0x40230000 0x400>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_SPI1>;
+ resets = <&rcc SPI1_R>;
+ access-controllers = <&rifsc 22>;
+ status = "disabled";
+ };
+
+ spi4: spi@40240000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp25-spi";
+ reg = <0x40240000 0x400>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_SPI4>;
+ resets = <&rcc SPI4_R>;
+ access-controllers = <&rifsc 25>;
+ status = "disabled";
+ };
+
+ spi5: spi@40280000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp25-spi";
+ reg = <0x40280000 0x400>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_SPI5>;
+ resets = <&rcc SPI5_R>;
+ access-controllers = <&rifsc 26>;
+ status = "disabled";
+ };
+
+ spi6: spi@40350000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp25-spi";
+ reg = <0x40350000 0x400>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_SPI6>;
+ resets = <&rcc SPI6_R>;
+ access-controllers = <&rifsc 27>;
+ status = "disabled";
+ };
+
+ spi7: spi@40360000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp25-spi";
+ reg = <0x40360000 0x400>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_SPI7>;
+ resets = <&rcc SPI7_R>;
+ access-controllers = <&rifsc 28>;
+ status = "disabled";
+ };
+
+ spi8: spi@46020000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp25-spi";
+ reg = <0x46020000 0x400>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_SPI8>;
+ resets = <&rcc SPI8_R>;
+ access-controllers = <&rifsc 29>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@46040000 {
+ compatible = "st,stm32mp25-i2c";
+ reg = <0x46040000 0x400>;
+ interrupt-names = "event";
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_I2C8>;
+ resets = <&rcc I2C8_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 48>;
status = "disabled";
};
@@ -143,11 +329,13 @@
arm,primecell-periphid = <0x00353180>;
reg = <0x48220000 0x400>, <0x44230400 0x8>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ck_flexgen_51>;
+ clocks = <&rcc CK_KER_SDMMC1 >;
clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <120000000>;
+ access-controllers = <&rifsc 76>;
status = "disabled";
};
};
@@ -168,6 +356,186 @@
};
};
+ rcc: clock-controller@44200000 {
+ compatible = "st,stm32mp25-rcc";
+ reg = <0x44200000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_MSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>,
+ <&scmi_clk CK_SCMI_HSE_DIV2>,
+ <&scmi_clk CK_SCMI_ICN_HS_MCU>,
+ <&scmi_clk CK_SCMI_ICN_LS_MCU>,
+ <&scmi_clk CK_SCMI_ICN_SDMMC>,
+ <&scmi_clk CK_SCMI_ICN_DDR>,
+ <&scmi_clk CK_SCMI_ICN_DISPLAY>,
+ <&scmi_clk CK_SCMI_ICN_HSL>,
+ <&scmi_clk CK_SCMI_ICN_NIC>,
+ <&scmi_clk CK_SCMI_ICN_VID>,
+ <&scmi_clk CK_SCMI_FLEXGEN_07>,
+ <&scmi_clk CK_SCMI_FLEXGEN_08>,
+ <&scmi_clk CK_SCMI_FLEXGEN_09>,
+ <&scmi_clk CK_SCMI_FLEXGEN_10>,
+ <&scmi_clk CK_SCMI_FLEXGEN_11>,
+ <&scmi_clk CK_SCMI_FLEXGEN_12>,
+ <&scmi_clk CK_SCMI_FLEXGEN_13>,
+ <&scmi_clk CK_SCMI_FLEXGEN_14>,
+ <&scmi_clk CK_SCMI_FLEXGEN_15>,
+ <&scmi_clk CK_SCMI_FLEXGEN_16>,
+ <&scmi_clk CK_SCMI_FLEXGEN_17>,
+ <&scmi_clk CK_SCMI_FLEXGEN_18>,
+ <&scmi_clk CK_SCMI_FLEXGEN_19>,
+ <&scmi_clk CK_SCMI_FLEXGEN_20>,
+ <&scmi_clk CK_SCMI_FLEXGEN_21>,
+ <&scmi_clk CK_SCMI_FLEXGEN_22>,
+ <&scmi_clk CK_SCMI_FLEXGEN_23>,
+ <&scmi_clk CK_SCMI_FLEXGEN_24>,
+ <&scmi_clk CK_SCMI_FLEXGEN_25>,
+ <&scmi_clk CK_SCMI_FLEXGEN_26>,
+ <&scmi_clk CK_SCMI_FLEXGEN_27>,
+ <&scmi_clk CK_SCMI_FLEXGEN_28>,
+ <&scmi_clk CK_SCMI_FLEXGEN_29>,
+ <&scmi_clk CK_SCMI_FLEXGEN_30>,
+ <&scmi_clk CK_SCMI_FLEXGEN_31>,
+ <&scmi_clk CK_SCMI_FLEXGEN_32>,
+ <&scmi_clk CK_SCMI_FLEXGEN_33>,
+ <&scmi_clk CK_SCMI_FLEXGEN_34>,
+ <&scmi_clk CK_SCMI_FLEXGEN_35>,
+ <&scmi_clk CK_SCMI_FLEXGEN_36>,
+ <&scmi_clk CK_SCMI_FLEXGEN_37>,
+ <&scmi_clk CK_SCMI_FLEXGEN_38>,
+ <&scmi_clk CK_SCMI_FLEXGEN_39>,
+ <&scmi_clk CK_SCMI_FLEXGEN_40>,
+ <&scmi_clk CK_SCMI_FLEXGEN_41>,
+ <&scmi_clk CK_SCMI_FLEXGEN_42>,
+ <&scmi_clk CK_SCMI_FLEXGEN_43>,
+ <&scmi_clk CK_SCMI_FLEXGEN_44>,
+ <&scmi_clk CK_SCMI_FLEXGEN_45>,
+ <&scmi_clk CK_SCMI_FLEXGEN_46>,
+ <&scmi_clk CK_SCMI_FLEXGEN_47>,
+ <&scmi_clk CK_SCMI_FLEXGEN_48>,
+ <&scmi_clk CK_SCMI_FLEXGEN_49>,
+ <&scmi_clk CK_SCMI_FLEXGEN_50>,
+ <&scmi_clk CK_SCMI_FLEXGEN_51>,
+ <&scmi_clk CK_SCMI_FLEXGEN_52>,
+ <&scmi_clk CK_SCMI_FLEXGEN_53>,
+ <&scmi_clk CK_SCMI_FLEXGEN_54>,
+ <&scmi_clk CK_SCMI_FLEXGEN_55>,
+ <&scmi_clk CK_SCMI_FLEXGEN_56>,
+ <&scmi_clk CK_SCMI_FLEXGEN_57>,
+ <&scmi_clk CK_SCMI_FLEXGEN_58>,
+ <&scmi_clk CK_SCMI_FLEXGEN_59>,
+ <&scmi_clk CK_SCMI_FLEXGEN_60>,
+ <&scmi_clk CK_SCMI_FLEXGEN_61>,
+ <&scmi_clk CK_SCMI_FLEXGEN_62>,
+ <&scmi_clk CK_SCMI_FLEXGEN_63>,
+ <&scmi_clk CK_SCMI_ICN_APB1>,
+ <&scmi_clk CK_SCMI_ICN_APB2>,
+ <&scmi_clk CK_SCMI_ICN_APB3>,
+ <&scmi_clk CK_SCMI_ICN_APB4>,
+ <&scmi_clk CK_SCMI_ICN_APBDBG>,
+ <&scmi_clk CK_SCMI_TIMG1>,
+ <&scmi_clk CK_SCMI_TIMG2>,
+ <&scmi_clk CK_SCMI_PLL3>,
+ <&clk_dsi_txbyte>;
+ };
+
+ exti1: interrupt-controller@44220000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x44220000 0x400>;
+ interrupts-extended =
+ <&intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */
+ <&intc GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */
+ <&intc GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <0>, /* EXTI_20 */
+ <&intc GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */
+ <&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_40 */
+ <&intc GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0>, /* EXTI_60 */
+ <&intc GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_70 */
+ <0>,
+ <&intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <0>, /* EXTI_80 */
+ <0>,
+ <0>,
+ <&intc GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
syscfg: syscon@44230000 {
compatible = "st,stm32mp25-syscfg", "syscon";
reg = <0x44230000 0x10000>;
@@ -178,6 +546,8 @@
#size-cells = <1>;
compatible = "st,stm32mp257-pinctrl";
ranges = <0 0x44240000 0xa0400>;
+ interrupt-parent = <&exti1>;
+ st,syscfg = <&exti1 0x60 0xff>;
pins-are-numbered;
gpioa: gpio@44240000 {
@@ -186,7 +556,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOA>;
st,bank-name = "GPIOA";
status = "disabled";
};
@@ -197,7 +567,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x10000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOB>;
st,bank-name = "GPIOB";
status = "disabled";
};
@@ -208,7 +578,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x20000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOC>;
st,bank-name = "GPIOC";
status = "disabled";
};
@@ -219,7 +589,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x30000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOD>;
st,bank-name = "GPIOD";
status = "disabled";
};
@@ -230,7 +600,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x40000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOE>;
st,bank-name = "GPIOE";
status = "disabled";
};
@@ -241,7 +611,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x50000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOF>;
st,bank-name = "GPIOF";
status = "disabled";
};
@@ -252,7 +622,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x60000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOG>;
st,bank-name = "GPIOG";
status = "disabled";
};
@@ -263,7 +633,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x70000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOH>;
st,bank-name = "GPIOH";
status = "disabled";
};
@@ -274,7 +644,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x80000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOI>;
st,bank-name = "GPIOI";
status = "disabled";
};
@@ -285,7 +655,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x90000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOJ>;
st,bank-name = "GPIOJ";
status = "disabled";
};
@@ -296,7 +666,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xa0000 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOK>;
st,bank-name = "GPIOK";
status = "disabled";
};
@@ -307,6 +677,8 @@
#size-cells = <1>;
compatible = "st,stm32mp257-z-pinctrl";
ranges = <0 0x46200000 0x400>;
+ interrupt-parent = <&exti1>;
+ st,syscfg = <&exti1 0x60 0xff>;
pins-are-numbered;
gpioz: gpio@46200000 {
@@ -315,12 +687,91 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x400>;
- clocks = <&ck_icn_ls_mcu>;
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
st,bank-name = "GPIOZ";
st,bank-ioport = <11>;
status = "disabled";
};
};
+
+ exti2: interrupt-controller@46230000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x46230000 0x400>;
+ interrupts-extended =
+ <&intc GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */
+ <&intc GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */
+ <&intc GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <0>, /* EXTI_20 */
+ <&intc GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */
+ <&intc GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_40 */
+ <0>,
+ <0>,
+ <&intc GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */
+ <&intc GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>, /* EXTI_60 */
+ <&intc GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <&intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>,
+ <&intc GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; /* EXTI_70 */
+ };
};
};
diff --git a/dts/upstream/src/arm64/st/stm32mp253.dtsi b/dts/upstream/src/arm64/st/stm32mp253.dtsi
index af48e82..029f889 100644
--- a/dts/upstream/src/arm64/st/stm32mp253.dtsi
+++ b/dts/upstream/src/arm64/st/stm32mp253.dtsi
@@ -20,4 +20,11 @@
<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
};
+
+ timer {
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
};
diff --git a/dts/upstream/src/arm64/st/stm32mp255.dtsi b/dts/upstream/src/arm64/st/stm32mp255.dtsi
index 17f197c..f689b47 100644
--- a/dts/upstream/src/arm64/st/stm32mp255.dtsi
+++ b/dts/upstream/src/arm64/st/stm32mp255.dtsi
@@ -5,22 +5,21 @@
*/
#include "stm32mp253.dtsi"
-/ {
- soc@0 {
- rifsc: rifsc-bus@42080000 {
- vdec: vdec@480d0000 {
- compatible = "st,stm32mp25-vdec";
- reg = <0x480d0000 0x3c8>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ck_icn_p_vdec>;
- };
+&rifsc {
+ vdec: vdec@480d0000 {
+ compatible = "st,stm32mp25-vdec";
+ reg = <0x480d0000 0x3c8>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_BUS_VDEC>;
+ access-controllers = <&rifsc 89>;
- venc: venc@480e0000 {
- compatible = "st,stm32mp25-venc";
- reg = <0x480e0000 0x800>;
- interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ck_icn_ls_mcu>;
- };
- };
};
-};
+
+ venc: venc@480e0000 {
+ compatible = "st,stm32mp25-venc";
+ reg = <0x480e0000 0x800>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_BUS_VENC>;
+ access-controllers = <&rifsc 90>;
+ };
+}; \ No newline at end of file
diff --git a/dts/upstream/src/arm64/st/stm32mp257f-ev1.dts b/dts/upstream/src/arm64/st/stm32mp257f-ev1.dts
index b2d3afb..27b7360 100644
--- a/dts/upstream/src/arm64/st/stm32mp257f-ev1.dts
+++ b/dts/upstream/src/arm64/st/stm32mp257f-ev1.dts
@@ -55,6 +55,26 @@
status = "okay";
};
+&i2c2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_pins_a>;
+ pinctrl-1 = <&i2c2_sleep_pins_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <13>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c8 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c8_pins_a>;
+ pinctrl-1 = <&i2c8_sleep_pins_a>;
+ i2c-scl-rising-time-ns = <57>;
+ i2c-scl-falling-time-ns = <7>;
+ clock-frequency = <400000>;
+ status = "disabled";
+};
+
&sdmmc1 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc1_b4_pins_a>;
@@ -68,6 +88,20 @@
status = "okay";
};
+&spi3 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi3_pins_a>;
+ pinctrl-1 = <&spi3_sleep_pins_a>;
+ status = "disabled";
+};
+
+&spi8 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi8_pins_a>;
+ pinctrl-1 = <&spi8_sleep_pins_a>;
+ status = "disabled";
+};
+
&usart2 {
pinctrl-names = "default", "idle", "sleep";
pinctrl-0 = <&usart2_pins_a>;
diff --git a/dts/upstream/src/arm64/synaptics/berlin4ct.dtsi b/dts/upstream/src/arm64/synaptics/berlin4ct.dtsi
index 53d616c..71e4bfc 100644
--- a/dts/upstream/src/arm64/synaptics/berlin4ct.dtsi
+++ b/dts/upstream/src/arm64/synaptics/berlin4ct.dtsi
@@ -88,7 +88,7 @@
};
pmu {
- compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/tesla/fsd.dtsi b/dts/upstream/src/arm64/tesla/fsd.dtsi
index 047a83c..690b4ed 100644
--- a/dts/upstream/src/arm64/tesla/fsd.dtsi
+++ b/dts/upstream/src/arm64/tesla/fsd.dtsi
@@ -304,7 +304,7 @@
};
arm-pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a72-pmu";
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts b/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts
index c414905..9a17bd3 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts
@@ -166,7 +166,6 @@
interrupt-parent = <&gic500>;
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
- ti,power-button;
regulators {
buck1_reg: buck1 {
diff --git a/dts/upstream/src/arm64/ti/k3-am62-main.dtsi b/dts/upstream/src/arm64/ti/k3-am62-main.dtsi
index e9cffca..448a59d 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-main.dtsi
@@ -619,10 +619,11 @@
usbss0: dwc3-usb@f900000 {
compatible = "ti,am62-usb";
- reg = <0x00 0x0f900000 0x00 0x800>;
+ reg = <0x00 0x0f900000 0x00 0x800>,
+ <0x00 0x0f908000 0x00 0x400>;
clocks = <&k3_clks 161 3>;
clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+ ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
#address-cells = <2>;
#size-cells = <2>;
power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
@@ -644,10 +645,11 @@
usbss1: dwc3-usb@f910000 {
compatible = "ti,am62-usb";
- reg = <0x00 0x0f910000 0x00 0x800>;
+ reg = <0x00 0x0f910000 0x00 0x800>,
+ <0x00 0x0f918000 0x00 0x400>;
clocks = <&k3_clks 162 3>;
clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+ ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
#address-cells = <2>;
#size-cells = <2>;
power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
diff --git a/dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi b/dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
index 6c4cec8..e8f4d13 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
@@ -22,6 +22,7 @@
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&codec_dai>;
simple-audio-card,name = "verdin-wm8904";
+ simple-audio-card,mclk-fs = <256>;
simple-audio-card,routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
@@ -35,7 +36,6 @@
"Line", "Line In Jack";
codec_dai: simple-audio-card,codec {
- clocks = <&audio_refclk1>;
sound-dai = <&wm8904_1a>;
};
@@ -43,6 +43,15 @@
sound-dai = <&mcasp0>;
};
};
+
+ reg_usb_hub: regulator-usb-hub {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ regulator-name = "HUB_PWR_EN";
+ };
};
/* Verdin ETHs */
@@ -160,7 +169,8 @@
pinctrl-0 = <&pinctrl_gpio_1>,
<&pinctrl_gpio_2>,
<&pinctrl_gpio_3>,
- <&pinctrl_gpio_4>;
+ <&pinctrl_gpio_4>,
+ <&pinctrl_pcie_1_reset>;
};
/* Verdin I2C_3_HDMI */
@@ -183,6 +193,11 @@
status = "okay";
};
+/* Do not force CTRL_SLEEP_MOCI# always enabled */
+&reg_force_sleep_moci {
+ status = "disabled";
+};
+
/* Verdin SD_1 */
&sdhci1 {
status = "okay";
@@ -203,7 +218,15 @@
};
&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ usb-hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ vdd-supply = <&reg_usb_hub>;
+ };
};
/* Verdin CTRL_WAKE1_MICO# */
@@ -211,6 +234,11 @@
status = "okay";
};
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+ status = "okay";
+};
+
/* Verdin UART_2 */
&wkup_uart0 {
status = "okay";
diff --git a/dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi b/dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi
index be62648..74eec1a 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi
@@ -181,7 +181,8 @@
pinctrl-0 = <&pinctrl_gpio_1>,
<&pinctrl_gpio_2>,
<&pinctrl_gpio_3>,
- <&pinctrl_gpio_4>;
+ <&pinctrl_gpio_4>,
+ <&pinctrl_pcie_1_reset>;
};
/* Verdin I2C_3_HDMI */
@@ -232,6 +233,11 @@
status = "okay";
};
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+ status = "okay";
+};
+
/* Verdin UART_2 */
&wkup_uart0 {
status = "okay";
diff --git a/dts/upstream/src/arm64/ti/k3-am62-verdin-mallow.dtsi b/dts/upstream/src/arm64/ti/k3-am62-verdin-mallow.dtsi
index 77b1beb..754216d 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-verdin-mallow.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-verdin-mallow.dtsi
@@ -81,10 +81,10 @@
&main_gpio0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
- <&pinctrl_gpio_1>,
- <&pinctrl_gpio_2>,
- <&pinctrl_gpio_3>,
- <&pinctrl_gpio_4>;
+ <&pinctrl_gpio_5>,
+ <&pinctrl_gpio_6>,
+ <&pinctrl_gpio_7>,
+ <&pinctrl_gpio_8>;
};
/* Verdin I2C_1 */
@@ -149,6 +149,15 @@
status = "okay";
};
+&mcu_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_1>,
+ <&pinctrl_gpio_2>,
+ <&pinctrl_gpio_3>,
+ <&pinctrl_gpio_4>,
+ <&pinctrl_pcie_1_reset>;
+};
+
/* Verdin I2C_3_HDMI */
&mcu_i2c0 {
status = "okay";
@@ -192,6 +201,11 @@
status = "okay";
};
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+ status = "okay";
+};
+
/* Verdin UART_2 */
&wkup_uart0 {
status = "okay";
diff --git a/dts/upstream/src/arm64/ti/k3-am62-verdin-yavia.dtsi b/dts/upstream/src/arm64/ti/k3-am62-verdin-yavia.dtsi
index 997dfaf..7372d39 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-verdin-yavia.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-verdin-yavia.dtsi
@@ -159,7 +159,8 @@
pinctrl-0 = <&pinctrl_gpio_1>,
<&pinctrl_gpio_2>,
<&pinctrl_gpio_3>,
- <&pinctrl_gpio_4>;
+ <&pinctrl_gpio_4>,
+ <&pinctrl_pcie_1_reset>;
};
/* Verdin I2C_3_HDMI */
@@ -205,6 +206,11 @@
status = "okay";
};
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+ status = "okay";
+};
+
/* Verdin UART_2 */
&wkup_uart0 {
status = "okay";
diff --git a/dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi b/dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi
index e8d8857..2038c5e 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi
@@ -76,7 +76,7 @@
memory@80000000 {
device_type = "memory";
- reg = <0x00000000 0x80000000 0x00000000 0x40000000>; /* 1G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; /* 2G RAM */
};
opp-table {
@@ -138,6 +138,22 @@
vin-supply = <&reg_1v8>;
};
+ /*
+ * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+ * peripherals on the carrier board powered.
+ * If more granularity or power saving is required this can be disabled
+ * in the carrier board device tree files.
+ */
+ reg_force_sleep_moci: regulator-force-sleep-moci {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "CTRL_SLEEP_MOCI#";
+ };
+
/* Verdin SD_1 Power Supply */
reg_sdhc1_vmmc: regulator-sdhci1 {
compatible = "regulator-fixed";
@@ -457,6 +473,13 @@
>;
};
+ /* Verdin SD_1_CD# as GPIO */
+ pinctrl_sd1_cd_gpio: main-gpio1-48-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 7) /* (D17) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */
+ >;
+ };
+
/* Verdin DSI_1_INT# (pulled-up as active-low) */
pinctrl_dsi1_int: main-gpio1-49-default-pins {
pinctrl-single,pins = <
@@ -571,7 +594,6 @@
AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ /* SODIMM 82 */
AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ /* SODIMM 70 */
AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ /* SODIMM 72 */
- AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ /* SODIMM 84 */
>;
};
@@ -979,14 +1001,6 @@
"",
"",
"";
-
- verdin_ctrl_sleep_moci: ctrl-sleep-moci-hog {
- gpio-hog;
- /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
- gpios = <31 GPIO_ACTIVE_HIGH>;
- line-name = "CTRL_SLEEP_MOCI#";
- output-high;
- };
};
&main_gpio1 {
@@ -1407,6 +1421,15 @@
"",
"",
"";
+
+ verdin_pcie_1_reset_hog: pcie-1-reset-hog {
+ gpio-hog;
+ /* Verdin PCIE_1_RESET# (SODIMM 244) */
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ line-name = "PCIE_1_RESET#";
+ output-low;
+ status = "disabled";
+ };
};
/* Verdin CAN_2 */
@@ -1441,10 +1464,12 @@
/* Verdin SD_1 */
&sdhci1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sdhci1>;
+ pinctrl-0 = <&pinctrl_sdhci1>, <&pinctrl_sd1_cd_gpio>;
+ cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
disable-wp;
vmmc-supply = <&reg_sdhc1_vmmc>;
vqmmc-supply = <&reg_sdhc1_vqmmc>;
+ ti,fails-without-test-cd;
status = "disabled";
};
diff --git a/dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi
index 23ce1bf..66ddf2d 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi
@@ -21,6 +21,16 @@
compatible = "ti,am654-chipid";
reg = <0x14 0x4>;
};
+
+ usb0_phy_ctrl: syscon@4008 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4008 0x4>;
+ };
+
+ usb1_phy_ctrl: syscon@4018 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4018 0x4>;
+ };
};
target-module@2b300050 {
diff --git a/dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts b/dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts
index a34e0df..18e3070 100644
--- a/dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts
+++ b/dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts
@@ -82,6 +82,17 @@
};
};
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_en_pins_default>;
+ /* Internal power on time(Figure 8-3) * 2 */
+ post-power-on-delay-ms = <10>;
+ /* Re-enable time(Figure 8-2) + 20uS */
+ power-off-delay-us = <80>;
+ reset-gpios = <&main_gpio0 38 GPIO_ACTIVE_LOW>;
+ };
+
vsys_5v0: regulator-1 {
bootph-all;
compatible = "regulator-fixed";
@@ -104,20 +115,6 @@
regulator-boot-on;
};
- wlan_en: regulator-3 {
- /* OUTPUT of SN74AVC2T244DQMR */
- compatible = "regulator-fixed";
- regulator-name = "wlan_en";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- regulator-always-on;
- vin-supply = <&vdd_3v3>;
- gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_en_pins_default>;
- };
-
vdd_3v3_sd: regulator-4 {
/* output of TPS22918DBVR-U21 */
bootph-all;
@@ -292,6 +289,8 @@
pinctrl-single,pins = <
AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
+ AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */
+ AM62X_IOPAD(0x018c, PIN_INPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
>;
};
@@ -383,7 +382,6 @@
AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
- AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
>;
@@ -597,6 +595,9 @@
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
+ reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <50000>;
};
cpsw3g_phy1: ethernet-phy@1 {
@@ -615,7 +616,7 @@
"USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */
"EEPROM_WP", /* 10 */
"CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */
- "CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "", /* 13-17 */
+ "CC1352P7_BOOT", "CC1352P7_RSTN", "GBE_RSTN", "", "", /* 13-17 */
"USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */
"", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */
"", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
@@ -839,13 +840,13 @@
};
&sdhci2 {
- vmmc-supply = <&wlan_en>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
non-removable;
ti,fails-without-test-cd;
cap-power-off-card;
keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
assigned-clocks = <&k3_clks 157 158>;
assigned-clock-parents = <&k3_clks 157 160>;
#address-cells = <1>;
diff --git a/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts b/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
index a83a904..50d2573 100644
--- a/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -31,7 +31,7 @@
can_tc1: can-phy0 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
- max-bitrate = <5000000>;
+ max-bitrate = <8000000>;
standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
};
@@ -66,6 +66,35 @@
};
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "phyBOARD-Lyra";
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker";
+ simple-audio-card,routing =
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "External Speaker", "SPOP",
+ "External Speaker", "SPOM";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp2>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&audio_codec>;
+ clocks = <&audio_refclk1>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -82,6 +111,15 @@
};
};
+ vcc_1v8: regulator-vcc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vcc_3v3_mmc: regulator-vcc-3v3-mmc {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3_MMC";
@@ -90,9 +128,24 @@
regulator-always-on;
regulator-boot-on;
};
+
+ vcc_3v3_sw: regulator-vcc-3v3-sw {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&main_pmx0 {
+ audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
+ >;
+ };
+
gpio_keys_pins_default: gpio-keys-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
@@ -150,6 +203,15 @@
>;
};
+ main_mcasp2_pins_default: main-mcasp2-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */
+ AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */
+ AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */
+ AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */
+ >;
+ };
+
main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
@@ -254,6 +316,21 @@
clock-frequency = <100000>;
status = "okay";
+ audio_codec: audio-codec@18 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_ext_refclk1_pins_default>;
+
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3007";
+ reg = <0x18>;
+ ai3x-micbias-vg = <2>;
+
+ AVDD-supply = <&vcc_3v3_sw>;
+ IOVDD-supply = <&vcc_3v3_sw>;
+ DRVDD-supply = <&vcc_3v3_sw>;
+ DVDD-supply = <&vcc_1v8>;
+ };
+
gpio_exp: gpio-expander@21 {
pinctrl-names = "default";
pinctrl-0 = <&gpio_exp_int_pins_default>;
@@ -271,6 +348,24 @@
"GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
};
+ usb-pd@22 {
+ compatible = "ti,tps6598x";
+ reg = <0x22>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ self-powered;
+ data-role = "dual";
+ power-role = "sink";
+ port {
+ usb_con_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
+ };
+ };
+
sii9022: bridge-hdmi@39 {
compatible = "sil,sii9022";
reg = <0x39>;
@@ -329,6 +424,28 @@
status = "okay";
};
+&mcasp2 {
+ #sound-dai-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcasp2_pins_default>;
+
+ /* MCASP_IIS_MODE */
+ op-mode = <0>;
+ tdm-slots = <2>;
+
+ /* 0: INACTIVE, 1: TX, 2: RX */
+ serial-dir = <
+ 0 0 1 2
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+ status = "okay";
+};
+
&sdhci1 {
vmmc-supply = <&vcc_3v3_mmc>;
vqmmc-supply = <&vddshv5_sdio>;
@@ -350,7 +467,13 @@
};
&usb0 {
- dr_mode = "peripheral";
+ usb-role-switch;
+
+ port {
+ typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
};
&usb1 {
diff --git a/dts/upstream/src/arm64/ti/k3-am62a-main.dtsi b/dts/upstream/src/arm64/ti/k3-am62a-main.dtsi
index aa1e057..bf9c2d9 100644
--- a/dts/upstream/src/arm64/ti/k3-am62a-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62a-main.dtsi
@@ -573,7 +573,6 @@
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
status = "disabled";
};
@@ -597,16 +596,16 @@
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
status = "disabled";
};
usbss0: dwc3-usb@f900000 {
compatible = "ti,am62-usb";
- reg = <0x00 0x0f900000 0x00 0x800>;
+ reg = <0x00 0x0f900000 0x00 0x800>,
+ <0x00 0x0f908000 0x00 0x400>;
clocks = <&k3_clks 161 3>;
clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+ ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
#address-cells = <2>;
#size-cells = <2>;
power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
@@ -621,15 +620,18 @@
interrupt-names = "host", "peripheral";
maximum-speed = "high-speed";
dr_mode = "otg";
+ snps,usb2-gadget-lpm-disable;
+ snps,usb2-lpm-disable;
};
};
usbss1: dwc3-usb@f910000 {
compatible = "ti,am62-usb";
- reg = <0x00 0x0f910000 0x00 0x800>;
+ reg = <0x00 0x0f910000 0x00 0x800>,
+ <0x00 0x0f918000 0x00 0x400>;
clocks = <&k3_clks 162 3>;
clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+ ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
#address-cells = <2>;
#size-cells = <2>;
power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
@@ -644,6 +646,8 @@
interrupt-names = "host", "peripheral";
maximum-speed = "high-speed";
dr_mode = "otg";
+ snps,usb2-gadget-lpm-disable;
+ snps,usb2-lpm-disable;
};
};
@@ -1051,4 +1055,11 @@
#size-cells = <0>;
};
};
+
+ vpu: video-codec@30210000 {
+ compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+ reg = <0x00 0x30210000 0x00 0x10000>;
+ clocks = <&k3_clks 204 2>;
+ power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
+ };
};
diff --git a/dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi
index f7bec48..98043e9 100644
--- a/dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi
@@ -17,6 +17,16 @@
compatible = "ti,am654-chipid";
reg = <0x14 0x4>;
};
+
+ usb0_phy_ctrl: syscon@4008 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4008 0x4>;
+ };
+
+ usb1_phy_ctrl: syscon@4018 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4018 0x4>;
+ };
};
wkup_uart0: serial@2b300000 {
diff --git a/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts b/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts
index f241637..fa43cd0 100644
--- a/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts
@@ -113,6 +113,20 @@
regulator-boot-on;
};
+ vddshv_sdio: regulator-5 {
+ compatible = "regulator-gpio";
+ regulator-name = "vddshv_sdio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vddshv_sdio_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&ldo1>;
+ gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -342,6 +356,12 @@
AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
>;
};
+
+ vddshv_sdio_pins_default: vddshv-sdio-default-pins {
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
+ >;
+ };
};
&mcu_pmx0 {
@@ -580,6 +600,7 @@
/* SD/MMC */
status = "okay";
vmmc-supply = <&vdd_mmc1>;
+ vqmmc-supply = <&vddshv_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
diff --git a/dts/upstream/src/arm64/ti/k3-am62p-main.dtsi b/dts/upstream/src/arm64/ti/k3-am62p-main.dtsi
index 7337a9e..900d1f9 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62p-main.dtsi
@@ -635,6 +635,58 @@
status = "disabled";
};
+ usbss0: usb@f900000 {
+ compatible = "ti,am62-usb";
+ reg = <0x00 0x0f900000 0x00 0x800>,
+ <0x00 0x0f908000 0x00 0x400>;
+ clocks = <&k3_clks 161 3>;
+ clock-names = "ref";
+ ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+ ranges;
+ status = "disabled";
+
+ usb0: usb@31000000 {
+ compatible = "snps,dwc3";
+ reg = <0x00 0x31000000 0x00 0x50000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+ interrupt-names = "host", "peripheral";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ snps,usb2-gadget-lpm-disable;
+ snps,usb2-lpm-disable;
+ };
+ };
+
+ usbss1: usb@f910000 {
+ compatible = "ti,am62-usb";
+ reg = <0x00 0x0f910000 0x00 0x800>,
+ <0x00 0x0f918000 0x00 0x400>;
+ clocks = <&k3_clks 162 3>;
+ clock-names = "ref";
+ ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+ ranges;
+ status = "disabled";
+
+ usb1: usb@31100000 {
+ compatible = "snps,dwc3";
+ reg = <0x00 0x31100000 0x00 0x50000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+ interrupt-names = "host", "peripheral";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ snps,usb2-gadget-lpm-disable;
+ snps,usb2-lpm-disable;
+ };
+ };
+
fss: bus@fc00000 {
compatible = "simple-bus";
reg = <0x00 0x0fc00000 0x00 0x70000>;
@@ -673,6 +725,7 @@
assigned-clock-parents = <&k3_clks 13 11>;
clock-names = "fck";
power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
dmas = <&main_pktdma 0xc600 15>,
<&main_pktdma 0xc601 15>,
@@ -696,6 +749,7 @@
label = "port1";
phys = <&phy_gmii_sel 1>;
mac-address = [00 00 00 00 00 00];
+ status = "disabled";
};
cpsw_port2: port@2 {
@@ -704,6 +758,7 @@
label = "port2";
phys = <&phy_gmii_sel 2>;
mac-address = [00 00 00 00 00 00];
+ status = "disabled";
};
};
diff --git a/dts/upstream/src/arm64/ti/k3-am62p-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-am62p-wakeup.dtsi
index a84756c..c71d962 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62p-wakeup.dtsi
@@ -18,6 +18,16 @@
reg = <0x14 0x4>;
bootph-all;
};
+
+ usb0_phy_ctrl: syscon@4008 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4008 0x4>;
+ };
+
+ usb1_phy_ctrl: syscon@4018 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4018 0x4>;
+ };
};
wkup_uart0: serial@2b300000 {
diff --git a/dts/upstream/src/arm64/ti/k3-am62p5-sk.dts b/dts/upstream/src/arm64/ti/k3-am62p5-sk.dts
index e86f34e..6e72346 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p5-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am62p5-sk.dts
@@ -27,6 +27,8 @@
spi0 = &ospi0;
ethernet0 = &cpsw_port1;
ethernet1 = &cpsw_port2;
+ usb0 = &usb0;
+ usb1 = &usb1;
};
chosen {
@@ -297,6 +299,12 @@
bootph-all;
};
+ main_usb1_pins_default: main-usb1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0258, PIN_INPUT, 0) /* (G21) USB1_DRVVBUS */
+ >;
+ };
+
main_wlirq_pins_default: main-wlirq-default-pins {
pinctrl-single,pins = <
AM62PX_IOPAD(0x0128, PIN_INPUT, 7) /* (K25) MMC2_SDWP.GPIO0_72 */
@@ -340,6 +348,36 @@
};
};
+&main_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ typec_pd0: usb-power-controller@3f {
+ compatible = "ti,tps6598x";
+ reg = <0x3f>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ self-powered;
+ data-role = "dual";
+ power-role = "sink";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ usb_con_hs: endpoint {
+ remote-endpoint = <&usb0_hs_ep>;
+ };
+ };
+ };
+ };
+ };
+};
+
&main_i2c1 {
status = "okay";
pinctrl-names = "default";
@@ -431,16 +469,19 @@
pinctrl-names = "default";
pinctrl-0 = <&main_rgmii1_pins_default>,
<&main_rgmii2_pins_default>;
+ status = "okay";
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
+ status = "okay";
};
&cpsw_port2 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy1>;
+ status = "okay";
};
&cpsw3g_mdio {
@@ -463,6 +504,35 @@
};
};
+&usbss0 {
+ status = "okay";
+ ti,vbus-divider;
+};
+
+&usbss1 {
+ status = "okay";
+ ti,vbus-divider;
+};
+
+&usb0 {
+ usb-role-switch;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb0_hs_ep: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_usb1_pins_default>;
+};
+
&mcasp1 {
status = "okay";
#sound-dai-cells = <0>;
@@ -493,7 +563,7 @@
pinctrl-0 = <&ospi0_pins_default>;
bootph-all;
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
diff --git a/dts/upstream/src/arm64/ti/k3-am642-evm.dts b/dts/upstream/src/arm64/ti/k3-am642-evm.dts
index 53fe1d0..e20e4ff 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-evm.dts
+++ b/dts/upstream/src/arm64/ti/k3-am642-evm.dts
@@ -473,7 +473,6 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
- current-speed = <115200>;
};
/* main_uart1 is reserved for firmware usage */
diff --git a/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-gpio-fan.dtso b/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-gpio-fan.dtso
new file mode 100644
index 0000000..5057658
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-gpio-fan.dtso
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ fan: gpio-fan {
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 8600 1>;
+ gpios = <&main_gpio0 28 GPIO_ACTIVE_LOW>;
+ #cooling-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_fan_pins_default>;
+ };
+};
+
+&main_pmx0 {
+ gpio_fan_pins_default: gpio-fan-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x070, PIN_OUTPUT, 7) /* (V18) GPMC0_AD13.GPIO0_28 */
+ >;
+ };
+};
+
+&thermal_zones {
+ main0_thermal: main0-thermal {
+ trips {
+ main0_thermal_trip0: main0-thermal-trip {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&main0_thermal_trip0>;
+ cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts b/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
index 8237b8c..6df331c 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
@@ -42,7 +42,7 @@
pinctrl-names = "default";
pinctrl-0 = <&can_tc1_pins_default>;
#phy-cells = <0>;
- max-bitrate = <5000000>;
+ max-bitrate = <8000000>;
standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
};
@@ -51,7 +51,7 @@
pinctrl-names = "default";
pinctrl-0 = <&can_tc2_pins_default>;
#phy-cells = <0>;
- max-bitrate = <5000000>;
+ max-bitrate = <8000000>;
standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
};
@@ -275,7 +275,6 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
- current-speed = <115200>;
};
&main_uart1 {
@@ -283,7 +282,6 @@
pinctrl-names = "default";
pinctrl-0 = <&main_uart1_pins_default>;
uart-has-rtscts;
- current-speed = <115200>;
};
&sdhci1 {
diff --git a/dts/upstream/src/arm64/ti/k3-am642-sk.dts b/dts/upstream/src/arm64/ti/k3-am642-sk.dts
index 67cd41b..5b028b3 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am642-sk.dts
@@ -381,7 +381,6 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
- current-speed = <115200>;
};
&main_uart1 {
diff --git a/dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi b/dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
index c50a585..ef78977 100644
--- a/dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -43,9 +43,33 @@
};
&icssg0_eth {
- status = "disabled";
-};
+ compatible = "ti,am654-sr1-icssg-prueth";
-&icssg0_mdio {
- status = "disabled";
+ ti,prus = <&pru0_0>, <&rtu0_0>, <&pru0_1>, <&rtu0_1>;
+ firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-rtu1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>, /* MII mode */
+ <2>;
+
+ dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+ <&main_udmap 0xc101>, /* egress slice 0 */
+ <&main_udmap 0xc102>, /* egress slice 0 */
+ <&main_udmap 0xc103>, /* egress slice 0 */
+ <&main_udmap 0xc104>, /* egress slice 1 */
+ <&main_udmap 0xc105>, /* egress slice 1 */
+ <&main_udmap 0xc106>, /* egress slice 1 */
+ <&main_udmap 0xc107>, /* egress slice 1 */
+ <&main_udmap 0x4100>, /* ingress slice 0 */
+ <&main_udmap 0x4101>, /* ingress slice 1 */
+ <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */
+ <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1",
+ "rxmgm0", "rxmgm1";
};
diff --git a/dts/upstream/src/arm64/ti/k3-am65-main.dtsi b/dts/upstream/src/arm64/ti/k3-am65-main.dtsi
index ff85711..ed71561 100644
--- a/dts/upstream/src/arm64/ti/k3-am65-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am65-main.dtsi
@@ -66,7 +66,7 @@
assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
ti,serdes-clk = <&serdes0_clk>;
#clock-cells = <1>;
- mux-controls = <&serdes_mux 0>;
+ mux-controls = <&serdes0_mux 0>;
};
serdes1: serdes@910000 {
@@ -81,7 +81,7 @@
assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
ti,serdes-clk = <&serdes1_clk>;
#clock-cells = <1>;
- mux-controls = <&serdes_mux 1>;
+ mux-controls = <&serdes1_mux 0>;
};
main_uart0: serial@2800000 {
@@ -89,7 +89,6 @@
reg = <0x00 0x02800000 0x00 0x100>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
@@ -436,18 +435,13 @@
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
- ti,otap-del-sel-sdr50 = <0x8>;
- ti,otap-del-sel-sdr104 = <0x7>;
- ti,otap-del-sel-ddr50 = <0x5>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x5>;
- ti,otap-del-sel-hs400 = <0x0>;
- ti,trm-icp = <0x8>;
+ ti,itap-del-sel-ddr52 = <0x0>;
dma-coherent;
status = "disabled";
};
@@ -459,18 +453,19 @@
clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
clock-names = "clk_ahb", "clk_xin";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0x8>;
ti,otap-del-sel-sdr104 = <0x7>;
ti,otap-del-sel-ddr50 = <0x4>;
- ti,otap-del-sel-ddr52 = <0x4>;
- ti,otap-del-sel-hs200 = <0x7>;
- ti,clkbuf-sel = <0x7>;
- ti,trm-icp = <0x8>;
+ ti,itap-del-sel-legacy = <0xa>;
+ ti,itap-del-sel-sd-hs = <0x1>;
+ ti,itap-del-sel-sdr12 = <0xa>;
+ ti,itap-del-sel-sdr25 = <0x1>;
dma-coherent;
status = "disabled";
};
@@ -483,20 +478,25 @@
ranges = <0x0 0x0 0x00100000 0x1c000>;
serdes0_clk: clock@4080 {
- compatible = "syscon";
- reg = <0x00004080 0x4>;
+ compatible = "ti,am654-serdes-ctrl", "syscon";
+ reg = <0x4080 0x4>;
+
+ serdes0_mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x0 0x3>; /* lane select */
+ };
};
serdes1_clk: clock@4090 {
- compatible = "syscon";
- reg = <0x00004090 0x4>;
- };
+ compatible = "ti,am654-serdes-ctrl", "syscon";
+ reg = <0x4090 0x4>;
- serdes_mux: mux-controller {
- compatible = "mmio-mux";
- #mux-control-cells = <1>;
- mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
- <0x4090 0x3>; /* SERDES1 lane select */
+ serdes1_mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x0 0x3>; /* lane select */
+ };
};
dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
diff --git a/dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi b/dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi
index 6ff3ccc..8feab93 100644
--- a/dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi
@@ -43,7 +43,6 @@
reg = <0x00 0x40a00000 0x00 0x100>;
interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
@@ -286,7 +285,11 @@
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+ <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+ <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
+ <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */
+ <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
ospi0: spi@47040000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
diff --git a/dts/upstream/src/arm64/ti/k3-am65-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-am65-wakeup.dtsi
index 3752789..eee072e 100644
--- a/dts/upstream/src/arm64/ti/k3-am65-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am65-wakeup.dtsi
@@ -59,7 +59,6 @@
reg = <0x42300000 0x100>;
interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm64/ti/k3-am69-sk.dts b/dts/upstream/src/arm64/ti/k3-am69-sk.dts
index 50de2a4..d88651c 100644
--- a/dts/upstream/src/arm64/ti/k3-am69-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am69-sk.dts
@@ -517,18 +517,18 @@
wkup_uart0_pins_default: wkup-uart0-default-pins {
bootph-all;
pinctrl-single,pins = <
- J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
- J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
- J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
- J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+ J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_UART0_CTSn */
+ J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_UART0_RTSn */
+ J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+ J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
>;
};
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
bootph-all;
pinctrl-single,pins = <
- J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
- J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+ J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+ J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
>;
};
diff --git a/dts/upstream/src/arm64/ti/k3-j7200-main.dtsi b/dts/upstream/src/arm64/ti/k3-j7200-main.dtsi
index 657f9cc..9386bf3 100644
--- a/dts/upstream/src/arm64/ti/k3-j7200-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j7200-main.dtsi
@@ -440,7 +440,6 @@
reg = <0x00 0x02800000 0x00 0x100>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 146 2>;
clock-names = "fclk";
@@ -452,7 +451,6 @@
reg = <0x00 0x02810000 0x00 0x100>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 278 2>;
clock-names = "fclk";
@@ -464,7 +462,6 @@
reg = <0x00 0x02820000 0x00 0x100>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 279 2>;
clock-names = "fclk";
@@ -476,7 +473,6 @@
reg = <0x00 0x02830000 0x00 0x100>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 280 2>;
clock-names = "fclk";
@@ -488,7 +484,6 @@
reg = <0x00 0x02840000 0x00 0x100>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 281 2>;
clock-names = "fclk";
@@ -500,7 +495,6 @@
reg = <0x00 0x02850000 0x00 0x100>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 282 2>;
clock-names = "fclk";
@@ -512,7 +506,6 @@
reg = <0x00 0x02860000 0x00 0x100>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 283 2>;
clock-names = "fclk";
@@ -524,7 +517,6 @@
reg = <0x00 0x02870000 0x00 0x100>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 284 2>;
clock-names = "fclk";
@@ -536,7 +528,6 @@
reg = <0x00 0x02880000 0x00 0x100>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 285 2>;
clock-names = "fclk";
@@ -548,7 +539,6 @@
reg = <0x00 0x02890000 0x00 0x100>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 286 2>;
clock-names = "fclk";
diff --git a/dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
index 7cf21c9..fccaabf 100644
--- a/dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
@@ -259,7 +259,6 @@
reg = <0x00 0x42300000 0x00 0x100>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 287 2>;
clock-names = "fclk";
@@ -271,7 +270,6 @@
reg = <0x00 0x40a00000 0x00 0x100>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 149 2>;
clock-names = "fclk";
@@ -520,10 +518,12 @@
fss: bus@47000000 {
compatible = "simple-bus";
- reg = <0x00 0x47000000 0x00 0x100>;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+ <0x0 0x47034000 0x0 0x47040000 0x0 0x100>, /* HBMC Control */
+ <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+ <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>; /* HBMC/OSPI0 Memory */
hbmc_mux: mux-controller@47000004 {
compatible = "reg-mux";
diff --git a/dts/upstream/src/arm64/ti/k3-j721e-main.dtsi b/dts/upstream/src/arm64/ti/k3-j721e-main.dtsi
index c7eafbc..0da785b 100644
--- a/dts/upstream/src/arm64/ti/k3-j721e-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721e-main.dtsi
@@ -1337,7 +1337,6 @@
reg = <0x00 0x02800000 0x00 0x100>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 146 0>;
clock-names = "fclk";
@@ -1349,7 +1348,6 @@
reg = <0x00 0x02810000 0x00 0x100>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 278 0>;
clock-names = "fclk";
@@ -1361,7 +1359,6 @@
reg = <0x00 0x02820000 0x00 0x100>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 279 0>;
clock-names = "fclk";
@@ -1373,7 +1370,6 @@
reg = <0x00 0x02830000 0x00 0x100>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 280 0>;
clock-names = "fclk";
@@ -1385,7 +1381,6 @@
reg = <0x00 0x02840000 0x00 0x100>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 281 0>;
clock-names = "fclk";
@@ -1397,7 +1392,6 @@
reg = <0x00 0x02850000 0x00 0x100>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 282 0>;
clock-names = "fclk";
@@ -1409,7 +1403,6 @@
reg = <0x00 0x02860000 0x00 0x100>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 283 0>;
clock-names = "fclk";
@@ -1421,7 +1414,6 @@
reg = <0x00 0x02870000 0x00 0x100>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 284 0>;
clock-names = "fclk";
@@ -1433,7 +1425,6 @@
reg = <0x00 0x02880000 0x00 0x100>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 285 0>;
clock-names = "fclk";
@@ -1445,7 +1436,6 @@
reg = <0x00 0x02890000 0x00 0x100>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 286 0>;
clock-names = "fclk";
diff --git a/dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
index 4618b69..9349ae0 100644
--- a/dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
@@ -243,7 +243,6 @@
reg = <0x00 0x42300000 0x00 0x100>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 287 0>;
clock-names = "fclk";
@@ -255,7 +254,6 @@
reg = <0x00 0x40a00000 0x00 0x100>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
- current-speed = <115200>;
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 149 0>;
clock-names = "fclk";
@@ -346,10 +344,14 @@
fss: bus@47000000 {
compatible = "simple-bus";
- reg = <0x0 0x47000000 0x0 0x100>;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+ <0x0 0x47034000 0x0 0x47034000 0x0 0x100>, /* HBMC Control */
+ <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+ <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
+ <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* HBMC/OSPI0 Memory */
+ <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
hbmc_mux: mux-controller@47000004 {
compatible = "reg-mux";
diff --git a/dts/upstream/src/arm64/ti/k3-j721s2-main.dtsi b/dts/upstream/src/arm64/ti/k3-j721s2-main.dtsi
index b70c861..9ed6949 100644
--- a/dts/upstream/src/arm64/ti/k3-j721s2-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721s2-main.dtsi
@@ -459,7 +459,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x200>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 146 3>;
clock-names = "fclk";
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
@@ -470,7 +469,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x200>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 350 3>;
clock-names = "fclk";
power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
@@ -481,7 +479,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x200>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 351 3>;
clock-names = "fclk";
power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
@@ -492,7 +489,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02830000 0x00 0x200>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 352 3>;
clock-names = "fclk";
power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
@@ -503,7 +499,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02840000 0x00 0x200>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 353 3>;
clock-names = "fclk";
power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
@@ -514,7 +509,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02850000 0x00 0x200>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 354 3>;
clock-names = "fclk";
power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
@@ -525,7 +519,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02860000 0x00 0x200>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 355 3>;
clock-names = "fclk";
power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
@@ -536,7 +529,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02870000 0x00 0x200>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 356 3>;
clock-names = "fclk";
power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
@@ -547,7 +539,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02880000 0x00 0x200>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 357 3>;
clock-names = "fclk";
power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
@@ -558,7 +549,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02890000 0x00 0x200>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 358 3>;
clock-names = "fclk";
power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
@@ -778,8 +768,6 @@
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
- /* Masking support for SDR104 capability */
- sdhci-caps-mask = <0x00000003 0x00000000>;
status = "disabled";
};
diff --git a/dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
index eaf7f70..5ccb04c 100644
--- a/dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -298,7 +298,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x200>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 359 3>;
clock-names = "fclk";
power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
@@ -309,7 +308,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x200>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 149 3>;
clock-names = "fclk";
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
diff --git a/dts/upstream/src/arm64/ti/k3-j721s2.dtsi b/dts/upstream/src/arm64/ti/k3-j721s2.dtsi
index be4502f..568e6a0 100644
--- a/dts/upstream/src/arm64/ti/k3-j721s2.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721s2.dtsi
@@ -117,6 +117,7 @@
#size-cells = <2>;
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+ <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
<0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe Core*/
<0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
diff --git a/dts/upstream/src/arm64/ti/k3-j722s-evm.dts b/dts/upstream/src/arm64/ti/k3-j722s-evm.dts
index cee3a86..bf3c246 100644
--- a/dts/upstream/src/arm64/ti/k3-j722s-evm.dts
+++ b/dts/upstream/src/arm64/ti/k3-j722s-evm.dts
@@ -226,10 +226,7 @@
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw_port2 {
- status = "disabled";
+ status = "okay";
};
&main_gpio1 {
@@ -369,6 +366,13 @@
};
+&sdhci0 {
+ disable-wp;
+ bootph-all;
+ ti,driver-strength-ohm = <50>;
+ status = "okay";
+};
+
&sdhci1 {
/* SD/MMC */
vmmc-supply = <&vdd_mmc1>;
@@ -377,7 +381,6 @@
pinctrl-0 = <&main_mmc1_pins_default>;
ti,driver-strength-ohm = <50>;
disable-wp;
- no-1-8-v;
status = "okay";
bootph-all;
};
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-evm.dts b/dts/upstream/src/arm64/ti/k3-j784s4-evm.dts
index 81fd7af..d511b25 100644
--- a/dts/upstream/src/arm64/ti/k3-j784s4-evm.dts
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-evm.dts
@@ -343,16 +343,16 @@
wkup_uart0_pins_default: wkup-uart0-default-pins {
bootph-all;
pinctrl-single,pins = <
- J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
- J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+ J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+ J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
>;
};
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
bootph-all;
pinctrl-single,pins = <
- J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
- J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+ J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+ J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
>;
};
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi b/dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi
index b67c374..6a4554c 100644
--- a/dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi
@@ -404,7 +404,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x200>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 146 0>;
clock-names = "fclk";
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
@@ -415,7 +414,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x200>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 388 0>;
clock-names = "fclk";
power-domains = <&k3_pds 388 TI_SCI_PD_EXCLUSIVE>;
@@ -426,7 +424,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x200>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 389 0>;
clock-names = "fclk";
power-domains = <&k3_pds 389 TI_SCI_PD_EXCLUSIVE>;
@@ -437,7 +434,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02830000 0x00 0x200>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 390 0>;
clock-names = "fclk";
power-domains = <&k3_pds 390 TI_SCI_PD_EXCLUSIVE>;
@@ -448,7 +444,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02840000 0x00 0x200>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 391 0>;
clock-names = "fclk";
power-domains = <&k3_pds 391 TI_SCI_PD_EXCLUSIVE>;
@@ -459,7 +454,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02850000 0x00 0x200>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 392 0>;
clock-names = "fclk";
power-domains = <&k3_pds 392 TI_SCI_PD_EXCLUSIVE>;
@@ -470,7 +464,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02860000 0x00 0x200>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 393 0>;
clock-names = "fclk";
power-domains = <&k3_pds 393 TI_SCI_PD_EXCLUSIVE>;
@@ -481,7 +474,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02870000 0x00 0x200>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 394 0>;
clock-names = "fclk";
power-domains = <&k3_pds 394 TI_SCI_PD_EXCLUSIVE>;
@@ -492,7 +484,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02880000 0x00 0x200>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 395 0>;
clock-names = "fclk";
power-domains = <&k3_pds 395 TI_SCI_PD_EXCLUSIVE>;
@@ -503,7 +494,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02890000 0x00 0x200>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 396 0>;
clock-names = "fclk";
power-domains = <&k3_pds 396 TI_SCI_PD_EXCLUSIVE>;
@@ -914,8 +904,6 @@
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
- sdhci-caps-mask = <0x00000003 0x00000000>;
- no-1-8-v;
status = "disabled";
};
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
index 77a8d99..2e18d91 100644
--- a/dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -304,7 +304,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x200>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 397 0>;
clock-names = "fclk";
power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
@@ -315,7 +314,6 @@
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x200>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
- current-speed = <115200>;
clocks = <&k3_clks 149 0>;
clock-names = "fclk";
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
@@ -674,10 +672,13 @@
fss: bus@47000000 {
compatible = "simple-bus";
- reg = <0x00 0x47000000 0x00 0x100>;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+ <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+ <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
+ <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */
+ <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
ospi0: spi@47040000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4.dtsi b/dts/upstream/src/arm64/ti/k3-j784s4.dtsi
index 6e2e92f..da7368e 100644
--- a/dts/upstream/src/arm64/ti/k3-j784s4.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j784s4.dtsi
@@ -234,6 +234,7 @@
#size-cells = <2>;
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+ <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
<0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
<0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */
diff --git a/dts/upstream/src/arm64/xilinx/zynqmp.dtsi b/dts/upstream/src/arm64/xilinx/zynqmp.dtsi
index 25d20d8..d99830c 100644
--- a/dts/upstream/src/arm64/xilinx/zynqmp.dtsi
+++ b/dts/upstream/src/arm64/xilinx/zynqmp.dtsi
@@ -169,7 +169,7 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
@@ -906,6 +906,7 @@
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_0>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_UART0>;
};
uart1: serial@ff010000 {
@@ -917,6 +918,7 @@
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_1>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_UART1>;
};
usb0: usb@ff9d0000 {
diff --git a/dts/upstream/src/loongarch/loongson-2k0500-ref.dts b/dts/upstream/src/loongarch/loongson-2k0500-ref.dts
index 8aefb0c..a34734a 100644
--- a/dts/upstream/src/loongarch/loongson-2k0500-ref.dts
+++ b/dts/upstream/src/loongarch/loongson-2k0500-ref.dts
@@ -44,14 +44,14 @@
&gmac0 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
bus_id = <0x0>;
};
&gmac1 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
bus_id = <0x1>;
};
diff --git a/dts/upstream/src/loongarch/loongson-2k0500.dtsi b/dts/upstream/src/loongarch/loongson-2k0500.dtsi
index 444779c..3b38ff8 100644
--- a/dts/upstream/src/loongarch/loongson-2k0500.dtsi
+++ b/dts/upstream/src/loongarch/loongson-2k0500.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
/ {
#address-cells = <2>;
@@ -19,14 +20,15 @@
compatible = "loongson,la264";
device_type = "cpu";
reg = <0x0>;
- clocks = <&cpu_clk>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
};
};
- cpu_clk: cpu-clk {
+ ref_100m: clock-ref-100m {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <500000000>;
+ clock-frequency = <100000000>;
+ clock-output-names = "ref_100m";
};
cpuintc: interrupt-controller {
@@ -35,6 +37,28 @@
interrupt-controller;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tsensor 0>;
+
+ trips {
+ cpu-alert {
+ temperature = <33000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu-crit {
+ temperature = <85000>;
+ hysteresis = <5000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
bus@10000000 {
compatible = "simple-bus";
ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
@@ -52,6 +76,54 @@
ranges = <1 0x0 0x0 0x16400000 0x4000>;
};
+ clk: clock-controller@1fe10400 {
+ compatible = "loongson,ls2k0500-clk";
+ reg = <0x0 0x1fe10400 0x0 0x2c>;
+ #clock-cells = <1>;
+ clocks = <&ref_100m>;
+ clock-names = "ref_100m";
+ };
+
+ dma-controller@1fe10c00 {
+ compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+ reg = <0 0x1fe10c00 0 0x8>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <67>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ dma-controller@1fe10c10 {
+ compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+ reg = <0 0x1fe10c10 0 0x8>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <68>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ dma-controller@1fe10c20 {
+ compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+ reg = <0 0x1fe10c20 0 0x8>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <69>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ dma-controller@1fe10c30 {
+ compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+ reg = <0 0x1fe10c30 0 0x8>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <70>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
liointc0: interrupt-controller@1fe11400 {
compatible = "loongson,liointc-2.0";
reg = <0x0 0x1fe11400 0x0 0x40>,
@@ -139,6 +211,14 @@
status = "disabled";
};
+ tsensor: thermal-sensor@1fe11500 {
+ compatible = "loongson,ls2k0500-thermal", "loongson,ls2k1000-thermal";
+ reg = <0x0 0x1fe11500 0x0 0x30>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
uart0: serial@1ff40800 {
compatible = "ns16550a";
reg = <0x0 0x1ff40800 0x0 0x10>;
diff --git a/dts/upstream/src/loongarch/loongson-2k1000-ref.dts b/dts/upstream/src/loongarch/loongson-2k1000-ref.dts
index ed4d324..23cf26c 100644
--- a/dts/upstream/src/loongarch/loongson-2k1000-ref.dts
+++ b/dts/upstream/src/loongarch/loongson-2k1000-ref.dts
@@ -43,7 +43,7 @@
&gmac0 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy0>;
mdio {
compatible = "snps,dwmac-mdio";
@@ -58,7 +58,7 @@
&gmac1 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy1>;
mdio {
compatible = "snps,dwmac-mdio";
@@ -113,10 +113,6 @@
status = "okay";
};
-&clk {
- status = "okay";
-};
-
&rtc0 {
status = "okay";
};
diff --git a/dts/upstream/src/loongarch/loongson-2k1000.dtsi b/dts/upstream/src/loongarch/loongson-2k1000.dtsi
index b6aeb1f..9218014 100644
--- a/dts/upstream/src/loongarch/loongson-2k1000.dtsi
+++ b/dts/upstream/src/loongarch/loongson-2k1000.dtsi
@@ -159,7 +159,6 @@
#clock-cells = <1>;
clocks = <&ref_100m>;
clock-names = "ref_100m";
- status = "disabled";
};
gpio0: gpio@1fe00500 {
diff --git a/dts/upstream/src/loongarch/loongson-2k2000-ref.dts b/dts/upstream/src/loongarch/loongson-2k2000-ref.dts
index 74b99bd..ea9e698 100644
--- a/dts/upstream/src/loongarch/loongson-2k2000-ref.dts
+++ b/dts/upstream/src/loongarch/loongson-2k2000-ref.dts
@@ -92,7 +92,7 @@
&gmac2 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy2>;
mdio {
compatible = "snps,dwmac-mdio";
diff --git a/dts/upstream/src/loongarch/loongson-2k2000.dtsi b/dts/upstream/src/loongarch/loongson-2k2000.dtsi
index 9eab2d0..0953c57 100644
--- a/dts/upstream/src/loongarch/loongson-2k2000.dtsi
+++ b/dts/upstream/src/loongarch/loongson-2k2000.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
/ {
#address-cells = <2>;
@@ -19,21 +20,22 @@
compatible = "loongson,la364";
device_type = "cpu";
reg = <0x0>;
- clocks = <&cpu_clk>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
};
cpu1: cpu@2 {
compatible = "loongson,la364";
device_type = "cpu";
reg = <0x1>;
- clocks = <&cpu_clk>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
};
};
- cpu_clk: cpu-clk {
+ ref_100m: clock-ref-100m {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <1400000000>;
+ clock-frequency = <100000000>;
+ clock-output-names = "ref_100m";
};
cpuintc: interrupt-controller {
@@ -42,6 +44,28 @@
interrupt-controller;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tsensor 0>;
+
+ trips {
+ cpu-alert {
+ temperature = <40000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu-crit {
+ temperature = <85000>;
+ hysteresis = <5000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
bus@10000000 {
compatible = "simple-bus";
ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
@@ -58,6 +82,14 @@
ranges = <1 0x0 0x0 0x18400000 0x4000>;
};
+ clk: clock-controller@10010480 {
+ compatible = "loongson,ls2k2000-clk";
+ reg = <0x0 0x10010480 0x0 0x100>;
+ #clock-cells = <1>;
+ clocks = <&ref_100m>;
+ clock-names = "ref_100m";
+ };
+
pmc: power-management@100d0000 {
compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
reg = <0x0 0x100d0000 0x0 0x58>;
@@ -80,6 +112,15 @@
};
};
+ tsensor: thermal-sensor@1fe01460 {
+ compatible = "loongson,ls2k2000-thermal";
+ reg = <0x0 0x1fe01460 0x0 0x30>,
+ <0x0 0x1fe0019c 0x0 0x4>;
+ interrupt-parent = <&liointc>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
liointc: interrupt-controller@1fe01400 {
compatible = "loongson,liointc-1.0";
reg = <0x0 0x1fe01400 0x0 0x64>;
diff --git a/dts/upstream/src/mips/ralink/mt7621.dtsi b/dts/upstream/src/mips/ralink/mt7621.dtsi
index 6e95e6f..0704eab 100644
--- a/dts/upstream/src/mips/ralink/mt7621.dtsi
+++ b/dts/upstream/src/mips/ralink/mt7621.dtsi
@@ -5,50 +5,143 @@
#include <dt-bindings/reset/mt7621-reset.h>
/ {
+ compatible = "mediatek,mt7621-soc";
+
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mediatek,mt7621-soc";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
- device_type = "cpu";
compatible = "mips,mips1004Kc";
reg = <0>;
+ device_type = "cpu";
};
cpu@1 {
- device_type = "cpu";
compatible = "mips,mips1004Kc";
reg = <1>;
+ device_type = "cpu";
};
};
cpuintc: cpuintc {
+ compatible = "mti,cpu-interrupt-controller";
+
#address-cells = <0>;
#interrupt-cells = <1>;
+
interrupt-controller;
- compatible = "mti,cpu-interrupt-controller";
};
mmc_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
- regulator-name = "mmc_power";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+
enable-active-high;
+
regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "mmc_power";
};
mmc_fixed_1v8_io: regulator-1v8 {
compatible = "regulator-fixed";
- regulator-name = "mmc_io";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+
enable-active-high;
+
regulator-always-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "mmc_io";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "ralink,mt7621-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+
+ mdio_pins: mdio0-pins {
+ pinmux {
+ groups = "mdio";
+ function = "mdio";
+ };
+ };
+
+ nand_pins: nand0-pins {
+ sdhci-pinmux {
+ groups = "sdhci";
+ function = "nand2";
+ };
+
+ spi-pinmux {
+ groups = "spi";
+ function = "nand1";
+ };
+ };
+
+ pcie_pins: pcie0-pins {
+ pinmux {
+ groups = "pcie";
+ function = "gpio";
+ };
+ };
+
+ rgmii1_pins: rgmii1-pins {
+ pinmux {
+ groups = "rgmii1";
+ function = "rgmii1";
+ };
+ };
+
+ rgmii2_pins: rgmii2-pins {
+ pinmux {
+ groups = "rgmii2";
+ function = "rgmii2";
+ };
+ };
+
+ sdhci_pins: sdhci0-pins {
+ pinmux {
+ groups = "sdhci";
+ function = "sdhci";
+ };
+ };
+
+ spi_pins: spi0-pins {
+ pinmux {
+ groups = "spi";
+ function = "spi";
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ pinmux {
+ groups = "uart1";
+ function = "uart1";
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ pinmux {
+ groups = "uart2";
+ function = "uart2";
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ pinmux {
+ groups = "uart3";
+ function = "uart3";
+ };
+ };
};
palmbus: palmbus@1e000000 {
@@ -62,12 +155,15 @@
sysc: syscon@0 {
compatible = "mediatek,mt7621-sysc", "syscon";
reg = <0x0 0x100>;
+
#clock-cells = <1>;
#reset-cells = <1>;
- ralink,memctl = <&memc>;
+
clock-output-names = "xtal", "cpu", "bus",
"50m", "125m", "150m",
"250m", "270m";
+
+ ralink,memctl = <&memc>;
};
wdt: watchdog@100 {
@@ -77,13 +173,16 @@
};
gpio: gpio@600 {
+ compatible = "mediatek,mt7621-gpio";
+ reg = <0x600 0x100>;
+
#gpio-cells = <2>;
#interrupt-cells = <2>;
- compatible = "mediatek,mt7621-gpio";
+
gpio-controller;
gpio-ranges = <&pinctrl 0 0 95>;
+
interrupt-controller;
- reg = <0x600 0x100>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -92,18 +191,19 @@
compatible = "mediatek,mt7621-i2c";
reg = <0x900 0x100>;
- clocks = <&sysc MT7621_CLK_I2C>;
- clock-names = "i2c";
- resets = <&sysc MT7621_RST_I2C>;
- reset-names = "i2c";
-
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
+ clocks = <&sysc MT7621_CLK_I2C>;
+ clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins>;
+
+ resets = <&sysc MT7621_RST_I2C>;
+ reset-names = "i2c";
+
+ status = "disabled";
};
memc: memory-controller@5000 {
@@ -170,135 +270,53 @@
};
spi0: spi@b00 {
- status = "disabled";
-
compatible = "ralink,mt7621-spi";
reg = <0xb00 0x100>;
- clocks = <&sysc MT7621_CLK_SPI>;
- clock-names = "spi";
-
- resets = <&sysc MT7621_RST_SPI>;
- reset-names = "spi";
-
#address-cells = <1>;
#size-cells = <0>;
+ clock-names = "spi";
+ clocks = <&sysc MT7621_CLK_SPI>;
+
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>;
- };
- };
-
- pinctrl: pinctrl {
- compatible = "ralink,mt7621-pinctrl";
-
- i2c_pins: i2c0-pins {
- pinmux {
- groups = "i2c";
- function = "i2c";
- };
- };
-
- spi_pins: spi0-pins {
- pinmux {
- groups = "spi";
- function = "spi";
- };
- };
-
- uart1_pins: uart1-pins {
- pinmux {
- groups = "uart1";
- function = "uart1";
- };
- };
-
- uart2_pins: uart2-pins {
- pinmux {
- groups = "uart2";
- function = "uart2";
- };
- };
-
- uart3_pins: uart3-pins {
- pinmux {
- groups = "uart3";
- function = "uart3";
- };
- };
-
- rgmii1_pins: rgmii1-pins {
- pinmux {
- groups = "rgmii1";
- function = "rgmii1";
- };
- };
-
- rgmii2_pins: rgmii2-pins {
- pinmux {
- groups = "rgmii2";
- function = "rgmii2";
- };
- };
-
- mdio_pins: mdio0-pins {
- pinmux {
- groups = "mdio";
- function = "mdio";
- };
- };
-
- pcie_pins: pcie0-pins {
- pinmux {
- groups = "pcie";
- function = "gpio";
- };
- };
-
- nand_pins: nand0-pins {
- spi-pinmux {
- groups = "spi";
- function = "nand1";
- };
- sdhci-pinmux {
- groups = "sdhci";
- function = "nand2";
- };
- };
+ reset-names = "spi";
+ resets = <&sysc MT7621_RST_SPI>;
- sdhci_pins: sdhci0-pins {
- pinmux {
- groups = "sdhci";
- function = "sdhci";
- };
+ status = "disabled";
};
};
mmc: mmc@1e130000 {
- status = "disabled";
-
compatible = "mediatek,mt7620-mmc";
reg = <0x1e130000 0x4000>;
bus-width = <4>;
- max-frequency = <48000000>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- vmmc-supply = <&mmc_fixed_3v3>;
- vqmmc-supply = <&mmc_fixed_1v8_io>;
- disable-wp;
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sdhci_pins>;
- pinctrl-1 = <&sdhci_pins>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
clocks = <&sysc MT7621_CLK_SHXC>,
<&sysc MT7621_CLK_50M>;
clock-names = "source", "hclk";
+ disable-wp;
+
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+
+ max-frequency = <48000000>;
+
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sdhci_pins>;
+ pinctrl-1 = <&sdhci_pins>;
+
+ vmmc-supply = <&mmc_fixed_3v3>;
+ vqmmc-supply = <&mmc_fixed_1v8_io>;
+
+ status = "disabled";
};
usb: usb@1e1c0000 {
@@ -321,15 +339,15 @@
compatible = "mti,gic";
reg = <0x1fbc0000 0x2000>;
- interrupt-controller;
#interrupt-cells = <3>;
+ interrupt-controller;
mti,reserved-cpu-vectors = <7>;
timer {
compatible = "mti,gic-timer";
- interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
clocks = <&sysc MT7621_CLK_CPU>;
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
};
};
@@ -347,46 +365,22 @@
compatible = "mediatek,mt7621-eth";
reg = <0x1e100000 0x10000>;
- clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>;
- clock-names = "fe", "ethif";
-
#address-cells = <1>;
#size-cells = <0>;
- resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>;
- reset-names = "fe", "eth";
+ clock-names = "fe", "ethif";
+ clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
- mediatek,ethsys = <&sysc>;
-
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>, <&rgmii2_pins>;
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "trgmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
-
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "rgmii";
+ reset-names = "fe", "eth";
+ resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
+ mediatek,ethsys = <&sysc>;
mdio: mdio-bus {
#address-cells = <1>;
@@ -395,73 +389,105 @@
switch0: switch@1f {
compatible = "mediatek,mt7621";
reg = <0x1f>;
- mediatek,mcm;
- resets = <&sysc MT7621_RST_MCM>;
- reset-names = "mcm";
- interrupt-controller;
+
#interrupt-cells = <1>;
+ interrupt-controller;
interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+ reset-names = "mcm";
+ resets = <&sysc MT7621_RST_MCM>;
+
+ mediatek,mcm;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
- status = "disabled";
reg = <0>;
label = "swp0";
+ status = "disabled";
};
port@1 {
- status = "disabled";
reg = <1>;
label = "swp1";
+ status = "disabled";
};
port@2 {
- status = "disabled";
reg = <2>;
label = "swp2";
+ status = "disabled";
};
port@3 {
- status = "disabled";
reg = <3>;
label = "swp3";
+ status = "disabled";
};
port@4 {
- status = "disabled";
reg = <4>;
label = "swp4";
+ status = "disabled";
};
port@5 {
reg = <5>;
+
ethernet = <&gmac1>;
phy-mode = "rgmii";
fixed-link {
- speed = <1000>;
full-duplex;
pause;
+ speed = <1000>;
};
};
port@6 {
reg = <6>;
+
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
- speed = <1000>;
full-duplex;
pause;
+ speed = <1000>;
};
};
};
};
};
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+
+ phy-mode = "trgmii";
+
+ fixed-link {
+ full-duplex;
+ pause;
+ speed = <1000>;
+ };
+ };
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+
+ phy-mode = "rgmii";
+
+ fixed-link {
+ full-duplex;
+ pause;
+ speed = <1000>;
+ };
+ };
+
};
pcie: pcie@1e140000 {
@@ -470,84 +496,106 @@
<0x1e142000 0x100>, /* pcie port 0 RC control registers */
<0x1e143000 0x100>, /* pcie port 1 RC control registers */
<0x1e144000 0x100>; /* pcie port 2 RC control registers */
+ ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */
+ <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
+
#address-cells = <3>;
+ #interrupt-cells = <1>;
#size-cells = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pins>;
-
device_type = "pci";
- ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */
- <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0xF800 0 0 0>;
- interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+ interrupt-map-mask = <0xf800 0 0 0>;
+ interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
<0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
<0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
+ ranges;
+
#address-cells = <3>;
+ #interrupt-cells = <1>;
#size-cells = <2>;
+
+ clocks = <&sysc MT7621_CLK_PCIE0>;
+
device_type = "pci";
- #interrupt-cells = <1>;
+
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&sysc MT7621_RST_PCIE0>;
- clocks = <&sysc MT7621_CLK_PCIE0>;
- phys = <&pcie0_phy 1>;
+
phy-names = "pcie-phy0";
- ranges;
+ phys = <&pcie0_phy 1>;
+
+ resets = <&sysc MT7621_RST_PCIE0>;
};
pcie@1,0 {
reg = <0x0800 0 0 0 0>;
+ ranges;
+
#address-cells = <3>;
+ #interrupt-cells = <1>;
#size-cells = <2>;
+
+ clocks = <&sysc MT7621_CLK_PCIE1>;
+
device_type = "pci";
- #interrupt-cells = <1>;
+
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&sysc MT7621_RST_PCIE1>;
- clocks = <&sysc MT7621_CLK_PCIE1>;
- phys = <&pcie0_phy 1>;
+
phy-names = "pcie-phy1";
- ranges;
+ phys = <&pcie0_phy 1>;
+
+ resets = <&sysc MT7621_RST_PCIE1>;
};
pcie@2,0 {
reg = <0x1000 0 0 0 0>;
+ ranges;
+
#address-cells = <3>;
+ #interrupt-cells = <1>;
#size-cells = <2>;
+
+ clocks = <&sysc MT7621_CLK_PCIE2>;
+
device_type = "pci";
- #interrupt-cells = <1>;
+
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&sysc MT7621_RST_PCIE2>;
- clocks = <&sysc MT7621_CLK_PCIE2>;
- phys = <&pcie2_phy 0>;
+
phy-names = "pcie-phy2";
- ranges;
+ phys = <&pcie2_phy 0>;
+
+ resets = <&sysc MT7621_RST_PCIE2>;
};
};
pcie0_phy: pcie-phy@1e149000 {
compatible = "mediatek,mt7621-pci-phy";
reg = <0x1e149000 0x0700>;
- clocks = <&sysc MT7621_CLK_XTAL>;
+
#phy-cells = <1>;
+
+ clocks = <&sysc MT7621_CLK_XTAL>;
};
pcie2_phy: pcie-phy@1e14a000 {
compatible = "mediatek,mt7621-pci-phy";
reg = <0x1e14a000 0x0700>;
- clocks = <&sysc MT7621_CLK_XTAL>;
+
#phy-cells = <1>;
+
+ clocks = <&sysc MT7621_CLK_XTAL>;
};
};
diff --git a/dts/upstream/src/powerpc/acadia.dts b/dts/upstream/src/powerpc/acadia.dts
index deb52e4..5fedda8 100644
--- a/dts/upstream/src/powerpc/acadia.dts
+++ b/dts/upstream/src/powerpc/acadia.dts
@@ -172,7 +172,7 @@
reg = <0xef602800 0x60>;
interrupt-parent = <&UIC0>;
interrupts = <0x4 0x4>;
- /* This thing is a bit weird. It has it's own UIC
+ /* This thing is a bit weird. It has its own UIC
* that it uses to generate snapshot triggers. We
* don't really support this device yet, and it needs
* work to figure this out.
diff --git a/dts/upstream/src/powerpc/fsl/b4si-post.dtsi b/dts/upstream/src/powerpc/fsl/b4si-post.dtsi
index 4f044b4..fb3200b 100644
--- a/dts/upstream/src/powerpc/fsl/b4si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/b4si-post.dtsi
@@ -50,7 +50,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
interrupts = <25 2 0 0>;
};
diff --git a/dts/upstream/src/powerpc/fsl/bsc9131rdb.dts b/dts/upstream/src/powerpc/fsl/bsc9131rdb.dts
index 8da9842..0ba86a6 100644
--- a/dts/upstream/src/powerpc/fsl/bsc9131rdb.dts
+++ b/dts/upstream/src/powerpc/fsl/bsc9131rdb.dts
@@ -15,7 +15,7 @@
device_type = "memory";
};
- board_ifc: ifc: ifc@ff71e000 {
+ board_ifc: ifc: memory-controller@ff71e000 {
/* NAND Flash on board */
ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
reg = <0x0 0xff71e000 0x0 0x2000>;
diff --git a/dts/upstream/src/powerpc/fsl/bsc9131si-post.dtsi b/dts/upstream/src/powerpc/fsl/bsc9131si-post.dtsi
index 2a677fd..5c53cee 100644
--- a/dts/upstream/src/powerpc/fsl/bsc9131si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/bsc9131si-post.dtsi
@@ -35,7 +35,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
interrupts = <16 2 0 0 20 2 0 0>;
};
diff --git a/dts/upstream/src/powerpc/fsl/bsc9132qds.dts b/dts/upstream/src/powerpc/fsl/bsc9132qds.dts
index 7cb2158..ce642e8 100644
--- a/dts/upstream/src/powerpc/fsl/bsc9132qds.dts
+++ b/dts/upstream/src/powerpc/fsl/bsc9132qds.dts
@@ -15,7 +15,7 @@
device_type = "memory";
};
- ifc: ifc@ff71e000 {
+ ifc: memory-controller@ff71e000 {
/* NOR, NAND Flash on board */
ranges = <0x0 0x0 0x0 0x88000000 0x08000000
0x1 0x0 0x0 0xff800000 0x00010000>;
diff --git a/dts/upstream/src/powerpc/fsl/bsc9132si-post.dtsi b/dts/upstream/src/powerpc/fsl/bsc9132si-post.dtsi
index b8e0edd..4da451e 100644
--- a/dts/upstream/src/powerpc/fsl/bsc9132si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/bsc9132si-post.dtsi
@@ -35,7 +35,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
/* FIXME: Test whether interrupts are split */
interrupts = <16 2 0 0 20 2 0 0>;
};
diff --git a/dts/upstream/src/powerpc/fsl/c293pcie.dts b/dts/upstream/src/powerpc/fsl/c293pcie.dts
index 5e905e0..e2fdac2 100644
--- a/dts/upstream/src/powerpc/fsl/c293pcie.dts
+++ b/dts/upstream/src/powerpc/fsl/c293pcie.dts
@@ -42,7 +42,7 @@
device_type = "memory";
};
- ifc: ifc@fffe1e000 {
+ ifc: memory-controller@fffe1e000 {
reg = <0xf 0xffe1e000 0 0x2000>;
ranges = <0x0 0x0 0xf 0xec000000 0x04000000
0x1 0x0 0xf 0xff800000 0x00010000
diff --git a/dts/upstream/src/powerpc/fsl/c293si-post.dtsi b/dts/upstream/src/powerpc/fsl/c293si-post.dtsi
index f208fb8..2d443d5 100644
--- a/dts/upstream/src/powerpc/fsl/c293si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/c293si-post.dtsi
@@ -35,7 +35,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
interrupts = <19 2 0 0>;
};
diff --git a/dts/upstream/src/powerpc/fsl/mpc8536si-post.dtsi b/dts/upstream/src/powerpc/fsl/mpc8536si-post.dtsi
index 4193570..fba40a1 100644
--- a/dts/upstream/src/powerpc/fsl/mpc8536si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/mpc8536si-post.dtsi
@@ -199,6 +199,10 @@
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-etsec1-0.dtsi"
+ enet0: ethernet@24000 {
+ fsl,wake-on-filer;
+ fsl,pmc-handle = <&etsec1_clk>;
+ };
/include/ "pq3-etsec1-timer-0.dtsi"
usb@22000 {
@@ -222,9 +226,10 @@
};
/include/ "pq3-etsec1-2.dtsi"
-
- ethernet@26000 {
+ enet2: ethernet@26000 {
cell-index = <1>;
+ fsl,wake-on-filer;
+ fsl,pmc-handle = <&etsec3_clk>;
};
usb@2b000 {
@@ -249,4 +254,9 @@
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
+
+/include/ "pq3-power.dtsi"
+ power@e0070 {
+ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+ };
};
diff --git a/dts/upstream/src/powerpc/fsl/mpc8544si-post.dtsi b/dts/upstream/src/powerpc/fsl/mpc8544si-post.dtsi
index b68eb11..ea7416af 100644
--- a/dts/upstream/src/powerpc/fsl/mpc8544si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/mpc8544si-post.dtsi
@@ -188,4 +188,6 @@
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
+
+/include/ "pq3-power.dtsi"
};
diff --git a/dts/upstream/src/powerpc/fsl/mpc8548si-post.dtsi b/dts/upstream/src/powerpc/fsl/mpc8548si-post.dtsi
index 579d76c..dddb737 100644
--- a/dts/upstream/src/powerpc/fsl/mpc8548si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/mpc8548si-post.dtsi
@@ -156,4 +156,6 @@
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
+
+/include/ "pq3-power.dtsi"
};
diff --git a/dts/upstream/src/powerpc/fsl/mpc8572si-post.dtsi b/dts/upstream/src/powerpc/fsl/mpc8572si-post.dtsi
index 49294cf..40a6cff 100644
--- a/dts/upstream/src/powerpc/fsl/mpc8572si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/mpc8572si-post.dtsi
@@ -193,4 +193,6 @@
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
+
+/include/ "pq3-power.dtsi"
};
diff --git a/dts/upstream/src/powerpc/fsl/p1010rdb-pb.dts b/dts/upstream/src/powerpc/fsl/p1010rdb-pb.dts
index 3a94acb..ce3346d 100644
--- a/dts/upstream/src/powerpc/fsl/p1010rdb-pb.dts
+++ b/dts/upstream/src/powerpc/fsl/p1010rdb-pb.dts
@@ -29,3 +29,19 @@
};
/include/ "p1010si-post.dtsi"
+
+&pci0 {
+ pcie@0 {
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ /*
+ *irq[4:5] are active-high
+ *irq[6:7] are active-low
+ */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
diff --git a/dts/upstream/src/powerpc/fsl/p1010rdb-pb_36b.dts b/dts/upstream/src/powerpc/fsl/p1010rdb-pb_36b.dts
index 4cf255f..8359035 100644
--- a/dts/upstream/src/powerpc/fsl/p1010rdb-pb_36b.dts
+++ b/dts/upstream/src/powerpc/fsl/p1010rdb-pb_36b.dts
@@ -56,3 +56,19 @@
};
/include/ "p1010si-post.dtsi"
+
+&pci0 {
+ pcie@0 {
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ /*
+ *irq[4:5] are active-high
+ *irq[6:7] are active-low
+ */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
diff --git a/dts/upstream/src/powerpc/fsl/p1010rdb.dtsi b/dts/upstream/src/powerpc/fsl/p1010rdb.dtsi
index 2ca9cee..ef49a7d 100644
--- a/dts/upstream/src/powerpc/fsl/p1010rdb.dtsi
+++ b/dts/upstream/src/powerpc/fsl/p1010rdb.dtsi
@@ -215,19 +215,3 @@
phy-connection-type = "sgmii";
};
};
-
-&pci0 {
- pcie@0 {
- interrupt-map = <
- /* IDSEL 0x0 */
- /*
- *irq[4:5] are active-high
- *irq[6:7] are active-low
- */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
- 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
- >;
- };
-};
diff --git a/dts/upstream/src/powerpc/fsl/p1010rdb_32b.dtsi b/dts/upstream/src/powerpc/fsl/p1010rdb_32b.dtsi
index fdc19aa..583a6cd 100644
--- a/dts/upstream/src/powerpc/fsl/p1010rdb_32b.dtsi
+++ b/dts/upstream/src/powerpc/fsl/p1010rdb_32b.dtsi
@@ -36,7 +36,7 @@ memory {
device_type = "memory";
};
-board_ifc: ifc: ifc@ffe1e000 {
+board_ifc: ifc: memory-controller@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
diff --git a/dts/upstream/src/powerpc/fsl/p1010rdb_36b.dtsi b/dts/upstream/src/powerpc/fsl/p1010rdb_36b.dtsi
index de2fcee..4d41efe 100644
--- a/dts/upstream/src/powerpc/fsl/p1010rdb_36b.dtsi
+++ b/dts/upstream/src/powerpc/fsl/p1010rdb_36b.dtsi
@@ -36,7 +36,7 @@ memory {
device_type = "memory";
};
-board_ifc: ifc: ifc@fffe1e000 {
+board_ifc: ifc: memory-controller@fffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0xf 0xee000000 0x02000000
0x1 0x0 0xf 0xff800000 0x00010000
diff --git a/dts/upstream/src/powerpc/fsl/p1010si-post.dtsi b/dts/upstream/src/powerpc/fsl/p1010si-post.dtsi
index ccda0a9..2d25507 100644
--- a/dts/upstream/src/powerpc/fsl/p1010si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/p1010si-post.dtsi
@@ -35,7 +35,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
interrupts = <16 2 0 0 19 2 0 0>;
};
@@ -183,9 +183,23 @@
/include/ "pq3-etsec2-1.dtsi"
/include/ "pq3-etsec2-2.dtsi"
+ enet0: ethernet@b0000 {
+ fsl,pmc-handle = <&etsec1_clk>;
+ };
+
+ enet1: ethernet@b1000 {
+ fsl,pmc-handle = <&etsec2_clk>;
+ };
+
+ enet2: ethernet@b2000 {
+ fsl,pmc-handle = <&etsec3_clk>;
+ };
+
global-utilities@e0000 {
compatible = "fsl,p1010-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
+
+/include/ "pq3-power.dtsi"
};
diff --git a/dts/upstream/src/powerpc/fsl/p1020si-post.dtsi b/dts/upstream/src/powerpc/fsl/p1020si-post.dtsi
index 642dc3a..cc4c746 100644
--- a/dts/upstream/src/powerpc/fsl/p1020si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/p1020si-post.dtsi
@@ -163,14 +163,17 @@
/include/ "pq3-etsec2-0.dtsi"
enet0: enet0_grp2: ethernet@b0000 {
+ fsl,pmc-handle = <&etsec1_clk>;
};
/include/ "pq3-etsec2-1.dtsi"
enet1: enet1_grp2: ethernet@b1000 {
+ fsl,pmc-handle = <&etsec2_clk>;
};
/include/ "pq3-etsec2-2.dtsi"
enet2: enet2_grp2: ethernet@b2000 {
+ fsl,pmc-handle = <&etsec3_clk>;
};
global-utilities@e0000 {
@@ -178,6 +181,8 @@
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
+
+/include/ "pq3-power.dtsi"
};
/include/ "pq3-etsec2-grp2-0.dtsi"
diff --git a/dts/upstream/src/powerpc/fsl/p1021si-post.dtsi b/dts/upstream/src/powerpc/fsl/p1021si-post.dtsi
index 407cb5f..378195d 100644
--- a/dts/upstream/src/powerpc/fsl/p1021si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/p1021si-post.dtsi
@@ -159,14 +159,17 @@
/include/ "pq3-etsec2-0.dtsi"
enet0: enet0_grp2: ethernet@b0000 {
+ fsl,pmc-handle = <&etsec1_clk>;
};
/include/ "pq3-etsec2-1.dtsi"
enet1: enet1_grp2: ethernet@b1000 {
+ fsl,pmc-handle = <&etsec2_clk>;
};
/include/ "pq3-etsec2-2.dtsi"
enet2: enet2_grp2: ethernet@b2000 {
+ fsl,pmc-handle = <&etsec3_clk>;
};
global-utilities@e0000 {
@@ -174,6 +177,8 @@
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
+
+/include/ "pq3-power.dtsi"
};
&qe {
diff --git a/dts/upstream/src/powerpc/fsl/p1022si-post.dtsi b/dts/upstream/src/powerpc/fsl/p1022si-post.dtsi
index 093e4e3..6ac21e8 100644
--- a/dts/upstream/src/powerpc/fsl/p1022si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/p1022si-post.dtsi
@@ -225,11 +225,13 @@
/include/ "pq3-etsec2-0.dtsi"
enet0: enet0_grp2: ethernet@b0000 {
fsl,wake-on-filer;
+ fsl,pmc-handle = <&etsec1_clk>;
};
/include/ "pq3-etsec2-1.dtsi"
enet1: enet1_grp2: ethernet@b1000 {
fsl,wake-on-filer;
+ fsl,pmc-handle = <&etsec2_clk>;
};
global-utilities@e0000 {
@@ -238,9 +240,10 @@
fsl,has-rstcr;
};
+/include/ "pq3-power.dtsi"
power@e0070 {
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
- reg = <0xe0070 0x20>;
+ compatible = "fsl,p1022-pmc", "fsl,mpc8536-pmc",
+ "fsl,mpc8548-pmc";
};
};
diff --git a/dts/upstream/src/powerpc/fsl/p2020si-post.dtsi b/dts/upstream/src/powerpc/fsl/p2020si-post.dtsi
index 81b9ab2..d410082 100644
--- a/dts/upstream/src/powerpc/fsl/p2020si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/p2020si-post.dtsi
@@ -178,6 +178,10 @@
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-etsec1-0.dtsi"
+ enet0: ethernet@24000 {
+ fsl,pmc-handle = <&etsec1_clk>;
+
+ };
/include/ "pq3-etsec1-timer-0.dtsi"
ptp_clock@24e00 {
@@ -186,7 +190,15 @@
/include/ "pq3-etsec1-1.dtsi"
+ enet1: ethernet@25000 {
+ fsl,pmc-handle = <&etsec2_clk>;
+ };
+
/include/ "pq3-etsec1-2.dtsi"
+ enet2: ethernet@26000 {
+ fsl,pmc-handle = <&etsec3_clk>;
+ };
+
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
compatible = "fsl,p2020-esdhc", "fsl,esdhc";
@@ -202,8 +214,5 @@
fsl,has-rstcr;
};
- pmc: power@e0070 {
- compatible = "fsl,mpc8548-pmc";
- reg = <0xe0070 0x20>;
- };
+/include/ "pq3-power.dtsi"
};
diff --git a/dts/upstream/src/powerpc/fsl/pq3-power.dtsi b/dts/upstream/src/powerpc/fsl/pq3-power.dtsi
new file mode 100644
index 0000000..6af1240
--- /dev/null
+++ b/dts/upstream/src/powerpc/fsl/pq3-power.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright 2024 NXP
+ */
+
+power@e0070 {
+ compatible = "fsl,mpc8548-pmc";
+ reg = <0xe0070 0x20>;
+
+ etsec1_clk: soc-clk@24 {
+ fsl,pmcdr-mask = <0x00000080>;
+ };
+ etsec2_clk: soc-clk@25 {
+ fsl,pmcdr-mask = <0x00000040>;
+ };
+ etsec3_clk: soc-clk@26 {
+ fsl,pmcdr-mask = <0x00000020>;
+ };
+};
diff --git a/dts/upstream/src/powerpc/fsl/t1023si-post.dtsi b/dts/upstream/src/powerpc/fsl/t1023si-post.dtsi
index aa5152c..8ef0c02 100644
--- a/dts/upstream/src/powerpc/fsl/t1023si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/t1023si-post.dtsi
@@ -52,7 +52,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
interrupts = <25 2 0 0>;
};
diff --git a/dts/upstream/src/powerpc/fsl/t1024rdb.dts b/dts/upstream/src/powerpc/fsl/t1024rdb.dts
index 270aaf6..7d003e0 100644
--- a/dts/upstream/src/powerpc/fsl/t1024rdb.dts
+++ b/dts/upstream/src/powerpc/fsl/t1024rdb.dts
@@ -91,7 +91,7 @@
board-control@2,0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,t1024-cpld";
+ compatible = "fsl,t1024-cpld", "fsl,deepsleep-cpld";
reg = <3 0 0x300>;
ranges = <0 3 0 0x300>;
bank-width = <1>;
diff --git a/dts/upstream/src/powerpc/fsl/t1040rdb.dts b/dts/upstream/src/powerpc/fsl/t1040rdb.dts
index dd3aab8..4347924 100644
--- a/dts/upstream/src/powerpc/fsl/t1040rdb.dts
+++ b/dts/upstream/src/powerpc/fsl/t1040rdb.dts
@@ -104,7 +104,7 @@
ifc: localbus@ffe124000 {
cpld@3,0 {
- compatible = "fsl,t1040rdb-cpld";
+ compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
};
};
};
diff --git a/dts/upstream/src/powerpc/fsl/t1040si-post.dtsi b/dts/upstream/src/powerpc/fsl/t1040si-post.dtsi
index 7767886..c9542b7 100644
--- a/dts/upstream/src/powerpc/fsl/t1040si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/t1040si-post.dtsi
@@ -52,7 +52,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
interrupts = <25 2 0 0>;
};
diff --git a/dts/upstream/src/powerpc/fsl/t1042rdb.dts b/dts/upstream/src/powerpc/fsl/t1042rdb.dts
index 3ebb712..0997643 100644
--- a/dts/upstream/src/powerpc/fsl/t1042rdb.dts
+++ b/dts/upstream/src/powerpc/fsl/t1042rdb.dts
@@ -68,7 +68,7 @@
ifc: localbus@ffe124000 {
cpld@3,0 {
- compatible = "fsl,t1042rdb-cpld";
+ compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
};
};
};
diff --git a/dts/upstream/src/powerpc/fsl/t1042rdb_pi.dts b/dts/upstream/src/powerpc/fsl/t1042rdb_pi.dts
index 8ec3ff4..b10cab1 100644
--- a/dts/upstream/src/powerpc/fsl/t1042rdb_pi.dts
+++ b/dts/upstream/src/powerpc/fsl/t1042rdb_pi.dts
@@ -41,7 +41,7 @@
ifc: localbus@ffe124000 {
cpld@3,0 {
- compatible = "fsl,t1042rdb_pi-cpld";
+ compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
};
};
diff --git a/dts/upstream/src/powerpc/fsl/t2081si-post.dtsi b/dts/upstream/src/powerpc/fsl/t2081si-post.dtsi
index 27714dc..6bb9587 100644
--- a/dts/upstream/src/powerpc/fsl/t2081si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/t2081si-post.dtsi
@@ -50,7 +50,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
interrupts = <25 2 0 0>;
};
diff --git a/dts/upstream/src/powerpc/fsl/t4240si-post.dtsi b/dts/upstream/src/powerpc/fsl/t4240si-post.dtsi
index fcac734..65f3e17 100644
--- a/dts/upstream/src/powerpc/fsl/t4240si-post.dtsi
+++ b/dts/upstream/src/powerpc/fsl/t4240si-post.dtsi
@@ -50,7 +50,7 @@
&ifc {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
+ compatible = "fsl,ifc";
interrupts = <25 2 0 0>;
};
diff --git a/dts/upstream/src/riscv/canaan/canaan_kd233.dts b/dts/upstream/src/riscv/canaan/canaan_kd233.dts
index 8df4cf3..a7d753b 100644
--- a/dts/upstream/src/riscv/canaan/canaan_kd233.dts
+++ b/dts/upstream/src/riscv/canaan/canaan_kd233.dts
@@ -15,6 +15,10 @@
model = "Kendryte KD233";
compatible = "canaan,kendryte-kd233", "canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -46,7 +50,6 @@
&fpioa {
pinctrl-0 = <&jtag_pinctrl>;
pinctrl-names = "default";
- status = "okay";
jtag_pinctrl: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -118,6 +121,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&spi0 {
@@ -125,6 +129,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "canaan,kd233-tft", "ilitek,ili9341";
diff --git a/dts/upstream/src/riscv/canaan/k210.dtsi b/dts/upstream/src/riscv/canaan/k210.dtsi
index f87c516..4f5d40f 100644
--- a/dts/upstream/src/riscv/canaan/k210.dtsi
+++ b/dts/upstream/src/riscv/canaan/k210.dtsi
@@ -16,13 +16,6 @@
#size-cells = <1>;
compatible = "canaan,kendryte-k210";
- aliases {
- serial0 = &uarths0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- };
-
/*
* The K210 has an sv39 MMU following the privileged specification v1.9.
* Since this is a non-ratified draft specification, the kernel does not
@@ -137,6 +130,7 @@
reg = <0x38000000 0x1000>;
interrupts = <33>;
clocks = <&sysclk K210_CLK_CPU>;
+ status = "disabled";
};
gpio0: gpio-controller@38001000 {
@@ -152,6 +146,7 @@
<62>, <63>, <64>, <65>;
gpio-controller;
ngpios = <32>;
+ status = "disabled";
};
dmac0: dma-controller@50000000 {
@@ -187,6 +182,7 @@
<&sysclk K210_CLK_GPIO>;
clock-names = "bus", "db";
resets = <&sysrst K210_RST_GPIO>;
+ status = "disabled";
gpio1_0: gpio-port@0 {
#gpio-cells = <2>;
@@ -214,6 +210,7 @@
dsr-override;
cts-override;
ri-override;
+ status = "disabled";
};
uart2: serial@50220000 {
@@ -230,6 +227,7 @@
dsr-override;
cts-override;
ri-override;
+ status = "disabled";
};
uart3: serial@50230000 {
@@ -246,6 +244,7 @@
dsr-override;
cts-override;
ri-override;
+ status = "disabled";
};
spi2: spi@50240000 {
@@ -259,6 +258,7 @@
<&sysclk K210_CLK_APB0>;
clock-names = "ssi_clk", "pclk";
resets = <&sysrst K210_RST_SPI2>;
+ status = "disabled";
};
i2s0: i2s@50250000 {
@@ -268,6 +268,7 @@
clocks = <&sysclk K210_CLK_I2S0>;
clock-names = "i2sclk";
resets = <&sysrst K210_RST_I2S0>;
+ status = "disabled";
};
i2s1: i2s@50260000 {
@@ -277,6 +278,7 @@
clocks = <&sysclk K210_CLK_I2S1>;
clock-names = "i2sclk";
resets = <&sysrst K210_RST_I2S1>;
+ status = "disabled";
};
i2s2: i2s@50270000 {
@@ -286,6 +288,7 @@
clocks = <&sysclk K210_CLK_I2S2>;
clock-names = "i2sclk";
resets = <&sysrst K210_RST_I2S2>;
+ status = "disabled";
};
i2c0: i2c@50280000 {
@@ -296,6 +299,7 @@
<&sysclk K210_CLK_APB0>;
clock-names = "ref", "pclk";
resets = <&sysrst K210_RST_I2C0>;
+ status = "disabled";
};
i2c1: i2c@50290000 {
@@ -306,6 +310,7 @@
<&sysclk K210_CLK_APB0>;
clock-names = "ref", "pclk";
resets = <&sysrst K210_RST_I2C1>;
+ status = "disabled";
};
i2c2: i2c@502a0000 {
@@ -316,6 +321,7 @@
<&sysclk K210_CLK_APB0>;
clock-names = "ref", "pclk";
resets = <&sysrst K210_RST_I2C2>;
+ status = "disabled";
};
fpioa: pinmux@502b0000 {
@@ -464,6 +470,7 @@
reset-names = "spi";
num-cs = <4>;
reg-io-width = <4>;
+ status = "disabled";
};
spi1: spi@53000000 {
@@ -479,6 +486,7 @@
reset-names = "spi";
num-cs = <4>;
reg-io-width = <4>;
+ status = "disabled";
};
spi3: spi@54000000 {
@@ -495,6 +503,7 @@
num-cs = <4>;
reg-io-width = <4>;
+ status = "disabled";
};
};
};
diff --git a/dts/upstream/src/riscv/canaan/k210_generic.dts b/dts/upstream/src/riscv/canaan/k210_generic.dts
index 396c8ca..5734cc0 100644
--- a/dts/upstream/src/riscv/canaan/k210_generic.dts
+++ b/dts/upstream/src/riscv/canaan/k210_generic.dts
@@ -15,6 +15,10 @@
model = "Kendryte K210 generic";
compatible = "canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -24,7 +28,6 @@
&fpioa {
pinctrl-0 = <&jtag_pins>;
pinctrl-names = "default";
- status = "okay";
jtag_pins: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
diff --git a/dts/upstream/src/riscv/canaan/sipeed_maix_bit.dts b/dts/upstream/src/riscv/canaan/sipeed_maix_bit.dts
index 6d25bf0..2ab376d 100644
--- a/dts/upstream/src/riscv/canaan/sipeed_maix_bit.dts
+++ b/dts/upstream/src/riscv/canaan/sipeed_maix_bit.dts
@@ -17,6 +17,10 @@
compatible = "sipeed,maix-bit", "sipeed,maix-bitm",
"canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -58,7 +62,6 @@
&fpioa {
pinctrl-names = "default";
pinctrl-0 = <&jtag_pinctrl>;
- status = "okay";
jtag_pinctrl: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -156,6 +159,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&i2c1 {
@@ -170,6 +174,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "sitronix,st7789v";
@@ -199,6 +204,8 @@
};
&spi3 {
+ status = "okay";
+
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
diff --git a/dts/upstream/src/riscv/canaan/sipeed_maix_dock.dts b/dts/upstream/src/riscv/canaan/sipeed_maix_dock.dts
index f4f4d8d..d98e207 100644
--- a/dts/upstream/src/riscv/canaan/sipeed_maix_dock.dts
+++ b/dts/upstream/src/riscv/canaan/sipeed_maix_dock.dts
@@ -17,6 +17,10 @@
compatible = "sipeed,maix-dock-m1", "sipeed,maix-dock-m1w",
"canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -63,7 +67,6 @@
&fpioa {
pinctrl-0 = <&jtag_pinctrl>;
pinctrl-names = "default";
- status = "okay";
jtag_pinctrl: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -159,6 +162,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&i2c1 {
@@ -173,6 +177,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "sitronix,st7789v";
diff --git a/dts/upstream/src/riscv/canaan/sipeed_maix_go.dts b/dts/upstream/src/riscv/canaan/sipeed_maix_go.dts
index 0d86df4..79ecd54 100644
--- a/dts/upstream/src/riscv/canaan/sipeed_maix_go.dts
+++ b/dts/upstream/src/riscv/canaan/sipeed_maix_go.dts
@@ -16,6 +16,10 @@
model = "SiPeed MAIX GO";
compatible = "sipeed,maix-go", "canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -69,7 +73,6 @@
&fpioa {
pinctrl-0 = <&jtag_pinctrl>;
pinctrl-names = "default";
- status = "okay";
jtag_pinctrl: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -167,6 +170,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&i2c1 {
@@ -181,6 +185,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "sitronix,st7789v";
@@ -209,6 +214,8 @@
};
&spi3 {
+ status = "okay";
+
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
diff --git a/dts/upstream/src/riscv/canaan/sipeed_maixduino.dts b/dts/upstream/src/riscv/canaan/sipeed_maixduino.dts
index 5c05c49..019c03a 100644
--- a/dts/upstream/src/riscv/canaan/sipeed_maixduino.dts
+++ b/dts/upstream/src/riscv/canaan/sipeed_maixduino.dts
@@ -15,6 +15,10 @@
model = "SiPeed MAIXDUINO";
compatible = "sipeed,maixduino", "canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -39,8 +43,6 @@
};
&fpioa {
- status = "okay";
-
uarths_pinctrl: uarths-pinmux {
pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
<K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
@@ -132,6 +134,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&i2c1 {
@@ -146,6 +149,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "sitronix,st7789v";
@@ -174,6 +178,8 @@
};
&spi3 {
+ status = "okay";
+
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
diff --git a/dts/upstream/src/riscv/microchip/mpfs-icicle-kit.dts b/dts/upstream/src/riscv/microchip/mpfs-icicle-kit.dts
index 222a39d..f80df22 100644
--- a/dts/upstream/src/riscv/microchip/mpfs-icicle-kit.dts
+++ b/dts/upstream/src/riscv/microchip/mpfs-icicle-kit.dts
@@ -100,6 +100,38 @@
&i2c1 {
status = "okay";
+
+ power-monitor@10 {
+ compatible = "microchip,pac1934";
+ reg = <0x10>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@1 {
+ reg = <0x1>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDDREG";
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDDA25";
+ };
+
+ channel@3 {
+ reg = <0x3>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDD25";
+ };
+
+ channel@4 {
+ reg = <0x4>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDDA_REG";
+ };
+ };
};
&i2c2 {
diff --git a/dts/upstream/src/riscv/renesas/r9a07g043f.dtsi b/dts/upstream/src/riscv/renesas/r9a07g043f.dtsi
index f35324b..e0ddf8f 100644
--- a/dts/upstream/src/riscv/renesas/r9a07g043f.dtsi
+++ b/dts/upstream/src/riscv/renesas/r9a07g043f.dtsi
@@ -54,6 +54,81 @@
dma-noncoherent;
interrupt-parent = <&plic>;
+ irqc: interrupt-controller@110a0000 {
+ compatible = "renesas,r9a07g043f-irqc";
+ reg = <0 0x110a0000 0 0x20000>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH>,
+ <34 IRQ_TYPE_LEVEL_HIGH>,
+ <35 IRQ_TYPE_LEVEL_HIGH>,
+ <36 IRQ_TYPE_LEVEL_HIGH>,
+ <37 IRQ_TYPE_LEVEL_HIGH>,
+ <38 IRQ_TYPE_LEVEL_HIGH>,
+ <39 IRQ_TYPE_LEVEL_HIGH>,
+ <40 IRQ_TYPE_LEVEL_HIGH>,
+ <476 IRQ_TYPE_LEVEL_HIGH>,
+ <477 IRQ_TYPE_LEVEL_HIGH>,
+ <478 IRQ_TYPE_LEVEL_HIGH>,
+ <479 IRQ_TYPE_LEVEL_HIGH>,
+ <480 IRQ_TYPE_LEVEL_HIGH>,
+ <481 IRQ_TYPE_LEVEL_HIGH>,
+ <482 IRQ_TYPE_LEVEL_HIGH>,
+ <483 IRQ_TYPE_LEVEL_HIGH>,
+ <484 IRQ_TYPE_LEVEL_HIGH>,
+ <485 IRQ_TYPE_LEVEL_HIGH>,
+ <486 IRQ_TYPE_LEVEL_HIGH>,
+ <487 IRQ_TYPE_LEVEL_HIGH>,
+ <488 IRQ_TYPE_LEVEL_HIGH>,
+ <489 IRQ_TYPE_LEVEL_HIGH>,
+ <490 IRQ_TYPE_LEVEL_HIGH>,
+ <491 IRQ_TYPE_LEVEL_HIGH>,
+ <492 IRQ_TYPE_LEVEL_HIGH>,
+ <493 IRQ_TYPE_LEVEL_HIGH>,
+ <494 IRQ_TYPE_LEVEL_HIGH>,
+ <495 IRQ_TYPE_LEVEL_HIGH>,
+ <496 IRQ_TYPE_LEVEL_HIGH>,
+ <497 IRQ_TYPE_LEVEL_HIGH>,
+ <498 IRQ_TYPE_LEVEL_HIGH>,
+ <499 IRQ_TYPE_LEVEL_HIGH>,
+ <500 IRQ_TYPE_LEVEL_HIGH>,
+ <501 IRQ_TYPE_LEVEL_HIGH>,
+ <502 IRQ_TYPE_LEVEL_HIGH>,
+ <503 IRQ_TYPE_LEVEL_HIGH>,
+ <504 IRQ_TYPE_LEVEL_HIGH>,
+ <505 IRQ_TYPE_LEVEL_HIGH>,
+ <506 IRQ_TYPE_LEVEL_HIGH>,
+ <507 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <66 IRQ_TYPE_EDGE_RISING>,
+ <67 IRQ_TYPE_EDGE_RISING>,
+ <68 IRQ_TYPE_EDGE_RISING>,
+ <69 IRQ_TYPE_EDGE_RISING>,
+ <70 IRQ_TYPE_EDGE_RISING>,
+ <71 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "nmi",
+ "irq0", "irq1", "irq2", "irq3",
+ "irq4", "irq5", "irq6", "irq7",
+ "tint0", "tint1", "tint2", "tint3",
+ "tint4", "tint5", "tint6", "tint7",
+ "tint8", "tint9", "tint10", "tint11",
+ "tint12", "tint13", "tint14", "tint15",
+ "tint16", "tint17", "tint18", "tint19",
+ "tint20", "tint21", "tint22", "tint23",
+ "tint24", "tint25", "tint26", "tint27",
+ "tint28", "tint29", "tint30", "tint31",
+ "bus-err", "ec7tie1-0", "ec7tie2-0",
+ "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+ "ec7tiovf-1";
+ clocks = <&cpg CPG_MOD R9A07G043_IAX45_CLK>,
+ <&cpg CPG_MOD R9A07G043_IAX45_PCLK>;
+ clock-names = "clk", "pclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_IAX45_RESETN>;
+ };
+
plic: interrupt-controller@12c00000 {
compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
#interrupt-cells = <2>;
diff --git a/dts/upstream/src/riscv/renesas/rzfive-smarc-som.dtsi b/dts/upstream/src/riscv/renesas/rzfive-smarc-som.dtsi
index 433ab5c..5e80824 100644
--- a/dts/upstream/src/riscv/renesas/rzfive-smarc-som.dtsi
+++ b/dts/upstream/src/riscv/renesas/rzfive-smarc-som.dtsi
@@ -6,19 +6,3 @@
*/
#include <arm64/renesas/rzg2ul-smarc-som.dtsi>
-
-#if (!SW_ET0_EN_N)
-&eth0 {
- phy0: ethernet-phy@7 {
- /delete-property/ interrupt-parent;
- /delete-property/ interrupts;
- };
-};
-#endif
-
-&eth1 {
- phy1: ethernet-phy@7 {
- /delete-property/ interrupt-parent;
- /delete-property/ interrupts;
- };
-};
diff --git a/dts/upstream/src/riscv/sophgo/cv1800b-milkv-duo.dts b/dts/upstream/src/riscv/sophgo/cv1800b-milkv-duo.dts
index 3af9e34..375ff26 100644
--- a/dts/upstream/src/riscv/sophgo/cv1800b-milkv-duo.dts
+++ b/dts/upstream/src/riscv/sophgo/cv1800b-milkv-duo.dts
@@ -23,9 +23,15 @@
stdout-path = "serial0:115200n8";
};
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x3f40000>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ coprocessor_rtos: region@83f40000 {
+ reg = <0x83f40000 0xc0000>;
+ no-map;
+ };
};
};
@@ -33,6 +39,15 @@
clock-frequency = <25000000>;
};
+&sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ no-mmc;
+ no-sdio;
+ disable-wp;
+};
+
&uart0 {
status = "okay";
};
diff --git a/dts/upstream/src/riscv/sophgo/cv1800b.dtsi b/dts/upstream/src/riscv/sophgo/cv1800b.dtsi
index 165e9e3..ec95309 100644
--- a/dts/upstream/src/riscv/sophgo/cv1800b.dtsi
+++ b/dts/upstream/src/riscv/sophgo/cv1800b.dtsi
@@ -7,6 +7,11 @@
/ {
compatible = "sophgo,cv1800b";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x4000000>;
+ };
};
&plic {
@@ -16,3 +21,7 @@
&clint {
compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
};
+
+&clk {
+ compatible = "sophgo,cv1800-clk";
+};
diff --git a/dts/upstream/src/riscv/sophgo/cv1812h.dtsi b/dts/upstream/src/riscv/sophgo/cv1812h.dtsi
index 3e7a942..7fa4c1e 100644
--- a/dts/upstream/src/riscv/sophgo/cv1812h.dtsi
+++ b/dts/upstream/src/riscv/sophgo/cv1812h.dtsi
@@ -22,3 +22,7 @@
&clint {
compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
};
+
+&clk {
+ compatible = "sophgo,cv1810-clk";
+};
diff --git a/dts/upstream/src/riscv/sophgo/cv18xx.dtsi b/dts/upstream/src/riscv/sophgo/cv18xx.dtsi
index 2d6f4a4..891932a 100644
--- a/dts/upstream/src/riscv/sophgo/cv18xx.dtsi
+++ b/dts/upstream/src/riscv/sophgo/cv18xx.dtsi
@@ -4,6 +4,8 @@
* Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
*/
+#include <dt-bindings/clock/sophgo,cv1800.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -53,6 +55,12 @@
dma-noncoherent;
ranges;
+ clk: clock-controller@3002000 {
+ reg = <0x03002000 0x1000>;
+ clocks = <&osc>;
+ #clock-cells = <1>;
+ };
+
gpio0: gpio@3020000 {
compatible = "snps,dw-apb-gpio";
reg = <0x3020000 0x1000>;
@@ -125,11 +133,67 @@
};
};
+ i2c0: i2c@4000000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04000000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
+ clock-names = "ref", "pclk";
+ interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@4010000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04010000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
+ clock-names = "ref", "pclk";
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@4020000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04020000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
+ clock-names = "ref", "pclk";
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@4030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04030000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
+ clock-names = "ref", "pclk";
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4040000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x04040000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
+ clock-names = "ref", "pclk";
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
uart0: serial@4140000 {
compatible = "snps,dw-apb-uart";
reg = <0x04140000 0x100>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
+ clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -139,7 +203,8 @@
compatible = "snps,dw-apb-uart";
reg = <0x04150000 0x100>;
interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
+ clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -149,7 +214,8 @@
compatible = "snps,dw-apb-uart";
reg = <0x04160000 0x100>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
+ clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -159,22 +225,78 @@
compatible = "snps,dw-apb-uart";
reg = <0x04170000 0x100>;
interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
+ clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
+ spi0: spi@4180000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0x04180000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
+ clock-names = "ssi_clk", "pclk";
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ spi1: spi@4190000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0x04190000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
+ clock-names = "ssi_clk", "pclk";
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ spi2: spi@41a0000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0x041a0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
+ clock-names = "ssi_clk", "pclk";
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ spi3: spi@41b0000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0x041b0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
+ clock-names = "ssi_clk", "pclk";
+ interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
uart4: serial@41c0000 {
compatible = "snps,dw-apb-uart";
reg = <0x041c0000 0x100>;
interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
+ clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
+ sdhci0: mmc@4310000 {
+ compatible = "sophgo,cv1800b-dwcmshc";
+ reg = <0x4310000 0x1000>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk CLK_AXI4_SD0>,
+ <&clk CLK_SD0>;
+ clock-names = "core", "bus";
+ status = "disabled";
+ };
+
plic: interrupt-controller@70000000 {
reg = <0x70000000 0x4000000>;
interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
diff --git a/dts/upstream/src/riscv/starfive/jh7100.dtsi b/dts/upstream/src/riscv/starfive/jh7100.dtsi
index 9a2e958..7de0732 100644
--- a/dts/upstream/src/riscv/starfive/jh7100.dtsi
+++ b/dts/upstream/src/riscv/starfive/jh7100.dtsi
@@ -13,7 +13,7 @@
#address-cells = <2>;
#size-cells = <2>;
- cpus {
+ cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/upstream/src/riscv/starfive/jh7110-common.dtsi b/dts/upstream/src/riscv/starfive/jh7110-common.dtsi
new file mode 100644
index 0000000..68d1671
--- /dev/null
+++ b/dts/upstream/src/riscv/starfive/jh7110-common.dtsi
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110.dtsi"
+#include "jh7110-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ ethernet0 = &gmac0;
+ i2c0 = &i2c0;
+ i2c2 = &i2c2;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x1 0x0>;
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
+ priority = <224>;
+ };
+
+ pwmdac_codec: audio-codec {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "left_j";
+ bitclock-master = <&sndcpu0>;
+ frame-master = <&sndcpu0>;
+
+ sndcpu0: cpu {
+ sound-dai = <&pwmdac>;
+ };
+
+ codec {
+ sound-dai = <&pwmdac_codec>;
+ };
+ };
+ };
+};
+
+&cpus {
+ timebase-frequency = <4000000>;
+};
+
+&dvp_clk {
+ clock-frequency = <74250000>;
+};
+
+&gmac0_rgmii_rxin {
+ clock-frequency = <125000000>;
+};
+
+&gmac0_rmii_refin {
+ clock-frequency = <50000000>;
+};
+
+&gmac1_rgmii_rxin {
+ clock-frequency = <125000000>;
+};
+
+&gmac1_rmii_refin {
+ clock-frequency = <50000000>;
+};
+
+&hdmitx0_pixelclk {
+ clock-frequency = <297000000>;
+};
+
+&i2srx_bclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&i2srx_lrck_ext {
+ clock-frequency = <192000>;
+};
+
+&i2stx_bclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&i2stx_lrck_ext {
+ clock-frequency = <192000>;
+};
+
+&mclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&osc {
+ clock-frequency = <24000000>;
+};
+
+&rtc_osc {
+ clock-frequency = <32768>;
+};
+
+&tdm_ext {
+ clock-frequency = <49152000>;
+};
+
+&camss {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+ <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
+ assigned-clock-rates = <49500000>, <198000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ camss_from_csi2rx: endpoint {
+ remote-endpoint = <&csi2rx_to_camss>;
+ };
+ };
+ };
+};
+
+&csi2rx {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
+ assigned-clock-rates = <297000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ /* remote MIPI sensor endpoint */
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi2rx_to_camss: endpoint {
+ remote-endpoint = <&camss_from_csi2rx>;
+ };
+ };
+ };
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&i2c5 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ status = "okay";
+
+ axp15060: pmic@36 {
+ compatible = "x-powers,axp15060";
+ reg = <0x36>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ vcc_3v3: dcdc1 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3";
+ };
+
+ vdd_cpu: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1540000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ emmc_vdd: aldo4 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "emmc_vdd";
+ };
+ };
+ };
+};
+
+&i2c6 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ max-frequency = <100000000>;
+ assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+ assigned-clock-rates = <50000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ cap-mmc-hw-reset;
+ post-power-on-delay-ms = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&emmc_vdd>;
+ status = "okay";
+};
+
+&mmc1 {
+ max-frequency = <100000000>;
+ assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+ assigned-clock-rates = <50000000>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ cap-sd-highspeed;
+ post-power-on-delay-ms = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ status = "okay";
+};
+
+&pwmdac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwmdac_pins>;
+ status = "okay";
+};
+
+&qspi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ nor_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ cdns,read-delay = <5>;
+ spi-max-frequency = <12000000>;
+ cdns,tshsl-ns = <1>;
+ cdns,tsd2d-ns = <1>;
+ cdns,tchsh-ns = <1>;
+ cdns,tslch-ns = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ spl@0 {
+ reg = <0x0 0x80000>;
+ };
+ uboot-env@f0000 {
+ reg = <0xf0000 0x10000>;
+ };
+ uboot@100000 {
+ reg = <0x100000 0x400000>;
+ };
+ reserved-data@600000 {
+ reg = <0x600000 0xa00000>;
+ };
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+
+ spi_dev0: spi@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&sysgpio {
+ i2c0_pins: i2c0-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(57, GPOUT_LOW,
+ GPOEN_SYS_I2C0_CLK,
+ GPI_SYS_I2C0_CLK)>,
+ <GPIOMUX(58, GPOUT_LOW,
+ GPOEN_SYS_I2C0_DATA,
+ GPI_SYS_I2C0_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c2_pins: i2c2-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(3, GPOUT_LOW,
+ GPOEN_SYS_I2C2_CLK,
+ GPI_SYS_I2C2_CLK)>,
+ <GPIOMUX(2, GPOUT_LOW,
+ GPOEN_SYS_I2C2_DATA,
+ GPI_SYS_I2C2_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c5_pins: i2c5-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(19, GPOUT_LOW,
+ GPOEN_SYS_I2C5_CLK,
+ GPI_SYS_I2C5_CLK)>,
+ <GPIOMUX(20, GPOUT_LOW,
+ GPOEN_SYS_I2C5_DATA,
+ GPI_SYS_I2C5_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c6_pins: i2c6-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(16, GPOUT_LOW,
+ GPOEN_SYS_I2C6_CLK,
+ GPI_SYS_I2C6_CLK)>,
+ <GPIOMUX(17, GPOUT_LOW,
+ GPOEN_SYS_I2C6_DATA,
+ GPI_SYS_I2C6_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ mmc0_pins: mmc0-0 {
+ rst-pins {
+ pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ mmc-pins {
+ pinmux = <PINMUX(64, 0)>,
+ <PINMUX(65, 0)>,
+ <PINMUX(66, 0)>,
+ <PINMUX(67, 0)>,
+ <PINMUX(68, 0)>,
+ <PINMUX(69, 0)>,
+ <PINMUX(70, 0)>,
+ <PINMUX(71, 0)>,
+ <PINMUX(72, 0)>,
+ <PINMUX(73, 0)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-enable;
+ };
+ };
+
+ mmc1_pins: mmc1-0 {
+ clk-pins {
+ pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ mmc-pins {
+ pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
+ GPOEN_SYS_SDIO1_CMD,
+ GPI_SYS_SDIO1_CMD)>,
+ <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
+ GPOEN_SYS_SDIO1_DATA0,
+ GPI_SYS_SDIO1_DATA0)>,
+ <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
+ GPOEN_SYS_SDIO1_DATA1,
+ GPI_SYS_SDIO1_DATA1)>,
+ <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
+ GPOEN_SYS_SDIO1_DATA2,
+ GPI_SYS_SDIO1_DATA2)>,
+ <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
+ GPOEN_SYS_SDIO1_DATA3,
+ GPI_SYS_SDIO1_DATA3)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+
+ pwmdac_pins: pwmdac-0 {
+ pwmdac-pins {
+ pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
+ GPOEN_ENABLE,
+ GPI_NONE)>,
+ <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm_pins: pwm-0 {
+ pwm-pins {
+ pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+ GPOEN_SYS_PWM0_CHANNEL0,
+ GPI_NONE)>,
+ <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+ GPOEN_SYS_PWM0_CHANNEL1,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ spi0_pins: spi0-0 {
+ mosi-pins {
+ pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+
+ miso-pins {
+ pinmux = <GPIOMUX(53, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_SPI0_RXD)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+
+ sck-pins {
+ pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
+ GPOEN_ENABLE,
+ GPI_SYS_SPI0_CLK)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+
+ ss-pins {
+ pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
+ GPOEN_ENABLE,
+ GPI_SYS_SPI0_FSS)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+ };
+
+ uart0_pins: uart0-0 {
+ tx-pins {
+ pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ rx-pins {
+ pinmux = <GPIOMUX(6, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_UART0_RX)>;
+ bias-disable; /* external pull-up */
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&U74_1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+ cpu-supply = <&vdd_cpu>;
+};
diff --git a/dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dts b/dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dts
new file mode 100644
index 0000000..fa0eac7
--- /dev/null
+++ b/dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+/dts-v1/;
+#include "jh7110-common.dtsi"
+
+/ {
+ model = "Milk-V Mars";
+ compatible = "milkv,mars", "starfive,jh7110";
+};
+
+&gmac0 {
+ starfive,tx-use-rgmii-clk;
+ assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+ assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+
+&phy0 {
+ motorcomm,tx-clk-adj-enabled;
+ motorcomm,tx-clk-10-inverted;
+ motorcomm,tx-clk-100-inverted;
+ motorcomm,tx-clk-1000-inverted;
+ motorcomm,rx-clk-drv-microamp = <3970>;
+ motorcomm,rx-data-drv-microamp = <2910>;
+ rx-internal-delay-ps = <1500>;
+ tx-internal-delay-ps = <1500>;
+};
diff --git a/dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi b/dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
index 45b58b6..9d70f21 100644
--- a/dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -5,188 +5,11 @@
*/
/dts-v1/;
-#include "jh7110.dtsi"
-#include "jh7110-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
+#include "jh7110-common.dtsi"
/ {
aliases {
- ethernet0 = &gmac0;
ethernet1 = &gmac1;
- i2c0 = &i2c0;
- i2c2 = &i2c2;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- mmc0 = &mmc0;
- mmc1 = &mmc1;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cpus {
- timebase-frequency = <4000000>;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0x1 0x0>;
- };
-
- gpio-restart {
- compatible = "gpio-restart";
- gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
- priority = <224>;
- };
-
- pwmdac_codec: pwmdac-codec {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
- };
-
- sound-pwmdac {
- compatible = "simple-audio-card";
- simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
- #address-cells = <1>;
- #size-cells = <0>;
-
- simple-audio-card,dai-link@0 {
- reg = <0>;
- format = "left_j";
- bitclock-master = <&sndcpu0>;
- frame-master = <&sndcpu0>;
-
- sndcpu0: cpu {
- sound-dai = <&pwmdac>;
- };
-
- codec {
- sound-dai = <&pwmdac_codec>;
- };
- };
- };
-};
-
-&dvp_clk {
- clock-frequency = <74250000>;
-};
-
-&gmac0_rgmii_rxin {
- clock-frequency = <125000000>;
-};
-
-&gmac0_rmii_refin {
- clock-frequency = <50000000>;
-};
-
-&gmac1_rgmii_rxin {
- clock-frequency = <125000000>;
-};
-
-&gmac1_rmii_refin {
- clock-frequency = <50000000>;
-};
-
-&hdmitx0_pixelclk {
- clock-frequency = <297000000>;
-};
-
-&i2srx_bclk_ext {
- clock-frequency = <12288000>;
-};
-
-&i2srx_lrck_ext {
- clock-frequency = <192000>;
-};
-
-&i2stx_bclk_ext {
- clock-frequency = <12288000>;
-};
-
-&i2stx_lrck_ext {
- clock-frequency = <192000>;
-};
-
-&mclk_ext {
- clock-frequency = <12288000>;
-};
-
-&osc {
- clock-frequency = <24000000>;
-};
-
-&rtc_osc {
- clock-frequency = <32768>;
-};
-
-&tdm_ext {
- clock-frequency = <49152000>;
-};
-
-&camss {
- assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
- <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
- assigned-clock-rates = <49500000>, <198000000>;
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- };
-
- port@1 {
- reg = <1>;
-
- camss_from_csi2rx: endpoint {
- remote-endpoint = <&csi2rx_to_camss>;
- };
- };
- };
-};
-
-&csi2rx {
- assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
- assigned-clock-rates = <297000000>;
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- /* remote MIPI sensor endpoint */
- };
-
- port@1 {
- reg = <1>;
-
- csi2rx_to_camss: endpoint {
- remote-endpoint = <&camss_from_csi2rx>;
- };
- };
- };
-};
-
-&gmac0 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
};
};
@@ -206,510 +29,6 @@
};
};
-&i2c0 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&i2c5 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_pins>;
- status = "okay";
-
- axp15060: pmic@36 {
- compatible = "x-powers,axp15060";
- reg = <0x36>;
- interrupts = <0>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- regulators {
- vcc_3v3: dcdc1 {
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_3v3";
- };
-
- vdd_cpu: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1540000>;
- regulator-name = "vdd-cpu";
- };
-
- emmc_vdd: aldo4 {
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "emmc_vdd";
- };
- };
- };
-};
-
-&i2c6 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
- status = "okay";
-};
-
-&i2srx {
- pinctrl-names = "default";
- pinctrl-0 = <&i2srx_pins>;
- status = "okay";
-};
-
-&i2stx0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mclk_ext_pins>;
- status = "okay";
-};
-
-&i2stx1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2stx1_pins>;
- status = "okay";
-};
-
&mmc0 {
- max-frequency = <100000000>;
- assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
- assigned-clock-rates = <50000000>;
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
non-removable;
- cap-mmc-hw-reset;
- post-power-on-delay-ms = <200>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&emmc_vdd>;
- status = "okay";
-};
-
-&mmc1 {
- max-frequency = <100000000>;
- assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
- assigned-clock-rates = <50000000>;
- bus-width = <4>;
- no-sdio;
- no-mmc;
- broken-cd;
- cap-sd-highspeed;
- post-power-on-delay-ms = <200>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- status = "okay";
-};
-
-&pwmdac {
- pinctrl-names = "default";
- pinctrl-0 = <&pwmdac_pins>;
- status = "okay";
-};
-
-&qspi {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- nor_flash: flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- cdns,read-delay = <5>;
- spi-max-frequency = <12000000>;
- cdns,tshsl-ns = <1>;
- cdns,tsd2d-ns = <1>;
- cdns,tchsh-ns = <1>;
- cdns,tslch-ns = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- spl@0 {
- reg = <0x0 0x80000>;
- };
- uboot-env@f0000 {
- reg = <0xf0000 0x10000>;
- };
- uboot@100000 {
- reg = <0x100000 0x400000>;
- };
- reserved-data@600000 {
- reg = <0x600000 0xa00000>;
- };
- };
- };
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm_pins>;
- status = "okay";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
- status = "okay";
-
- spi_dev0: spi@0 {
- compatible = "rohm,dh2228fv";
- reg = <0>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&sysgpio {
- i2c0_pins: i2c0-0 {
- i2c-pins {
- pinmux = <GPIOMUX(57, GPOUT_LOW,
- GPOEN_SYS_I2C0_CLK,
- GPI_SYS_I2C0_CLK)>,
- <GPIOMUX(58, GPOUT_LOW,
- GPOEN_SYS_I2C0_DATA,
- GPI_SYS_I2C0_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c2_pins: i2c2-0 {
- i2c-pins {
- pinmux = <GPIOMUX(3, GPOUT_LOW,
- GPOEN_SYS_I2C2_CLK,
- GPI_SYS_I2C2_CLK)>,
- <GPIOMUX(2, GPOUT_LOW,
- GPOEN_SYS_I2C2_DATA,
- GPI_SYS_I2C2_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c5_pins: i2c5-0 {
- i2c-pins {
- pinmux = <GPIOMUX(19, GPOUT_LOW,
- GPOEN_SYS_I2C5_CLK,
- GPI_SYS_I2C5_CLK)>,
- <GPIOMUX(20, GPOUT_LOW,
- GPOEN_SYS_I2C5_DATA,
- GPI_SYS_I2C5_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c6_pins: i2c6-0 {
- i2c-pins {
- pinmux = <GPIOMUX(16, GPOUT_LOW,
- GPOEN_SYS_I2C6_CLK,
- GPI_SYS_I2C6_CLK)>,
- <GPIOMUX(17, GPOUT_LOW,
- GPOEN_SYS_I2C6_DATA,
- GPI_SYS_I2C6_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2srx_pins: i2srx-0 {
- clk-sd-pins {
- pinmux = <GPIOMUX(38, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_BCLK)>,
- <GPIOMUX(63, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_LRCK)>,
- <GPIOMUX(38, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2STX1_BCLK)>,
- <GPIOMUX(63, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2STX1_LRCK)>,
- <GPIOMUX(61, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_SDIN0)>;
- input-enable;
- };
- };
-
- i2stx1_pins: i2stx1-0 {
- sd-pins {
- pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- input-disable;
- };
- };
-
- mclk_ext_pins: mclk-ext-0 {
- mclk-ext-pins {
- pinmux = <GPIOMUX(4, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_MCLK_EXT)>;
- input-enable;
- };
- };
-
- mmc0_pins: mmc0-0 {
- rst-pins {
- pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- mmc-pins {
- pinmux = <PINMUX(64, 0)>,
- <PINMUX(65, 0)>,
- <PINMUX(66, 0)>,
- <PINMUX(67, 0)>,
- <PINMUX(68, 0)>,
- <PINMUX(69, 0)>,
- <PINMUX(70, 0)>,
- <PINMUX(71, 0)>,
- <PINMUX(72, 0)>,
- <PINMUX(73, 0)>;
- bias-pull-up;
- drive-strength = <12>;
- input-enable;
- };
- };
-
- mmc1_pins: mmc1-0 {
- clk-pins {
- pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- mmc-pins {
- pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
- GPOEN_SYS_SDIO1_CMD,
- GPI_SYS_SDIO1_CMD)>,
- <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
- GPOEN_SYS_SDIO1_DATA0,
- GPI_SYS_SDIO1_DATA0)>,
- <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
- GPOEN_SYS_SDIO1_DATA1,
- GPI_SYS_SDIO1_DATA1)>,
- <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
- GPOEN_SYS_SDIO1_DATA2,
- GPI_SYS_SDIO1_DATA2)>,
- <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
- GPOEN_SYS_SDIO1_DATA3,
- GPI_SYS_SDIO1_DATA3)>;
- bias-pull-up;
- drive-strength = <12>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- };
-
- pwmdac_pins: pwmdac-0 {
- pwmdac-pins {
- pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
- GPOEN_ENABLE,
- GPI_NONE)>,
- <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- drive-strength = <2>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- pwm_pins: pwm-0 {
- pwm-pins {
- pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
- GPOEN_SYS_PWM0_CHANNEL0,
- GPI_NONE)>,
- <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
- GPOEN_SYS_PWM0_CHANNEL1,
- GPI_NONE)>;
- bias-disable;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- spi0_pins: spi0-0 {
- mosi-pins {
- pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
-
- miso-pins {
- pinmux = <GPIOMUX(53, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_SPI0_RXD)>;
- bias-pull-up;
- input-enable;
- input-schmitt-enable;
- };
-
- sck-pins {
- pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
- GPOEN_ENABLE,
- GPI_SYS_SPI0_CLK)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
-
- ss-pins {
- pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
- GPOEN_ENABLE,
- GPI_SYS_SPI0_FSS)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
- };
-
- tdm_pins: tdm-0 {
- tx-pins {
- pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <2>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- rx-pins {
- pinmux = <GPIOMUX(61, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_RXD)>;
- input-enable;
- };
-
- sync-pins {
- pinmux = <GPIOMUX(63, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_SYNC)>;
- input-enable;
- };
-
- pcmclk-pins {
- pinmux = <GPIOMUX(38, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_CLK)>;
- input-enable;
- };
- };
-
- uart0_pins: uart0-0 {
- tx-pins {
- pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- rx-pins {
- pinmux = <GPIOMUX(6, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_UART0_RX)>;
- bias-disable; /* external pull-up */
- drive-strength = <2>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- };
-};
-
-&tdm {
- pinctrl-names = "default";
- pinctrl-0 = <&tdm_pins>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&usb0 {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&U74_1 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_2 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_3 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_4 {
- cpu-supply = <&vdd_cpu>;
};
diff --git a/dts/upstream/src/riscv/starfive/jh7110.dtsi b/dts/upstream/src/riscv/starfive/jh7110.dtsi
index 4a5708f..1804719 100644
--- a/dts/upstream/src/riscv/starfive/jh7110.dtsi
+++ b/dts/upstream/src/riscv/starfive/jh7110.dtsi
@@ -15,7 +15,7 @@
#address-cells = <2>;
#size-cells = <2>;
- cpus {
+ cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/dts/upstream/src/riscv/thead/th1520.dtsi b/dts/upstream/src/riscv/thead/th1520.dtsi
index 8b915e2..d2fa258 100644
--- a/dts/upstream/src/riscv/thead/th1520.dtsi
+++ b/dts/upstream/src/riscv/thead/th1520.dtsi
@@ -193,6 +193,33 @@
status = "disabled";
};
+ emmc: mmc@ffe7080000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe7080000 0x0 0x10000>;
+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ sdio0: mmc@ffe7090000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe7090000 0x0 0x10000>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ sdio1: mmc@ffe70a0000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe70a0000 0x0 0x10000>;
+ interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
uart1: serial@ffe7f00000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f00000 0x0 0x100>;
@@ -311,33 +338,6 @@
status = "disabled";
};
- emmc: mmc@ffe7080000 {
- compatible = "thead,th1520-dwcmshc";
- reg = <0xff 0xe7080000 0x0 0x10000>;
- interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
- clock-names = "core";
- status = "disabled";
- };
-
- sdio0: mmc@ffe7090000 {
- compatible = "thead,th1520-dwcmshc";
- reg = <0xff 0xe7090000 0x0 0x10000>;
- interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
- clock-names = "core";
- status = "disabled";
- };
-
- sdio1: mmc@ffe70a0000 {
- compatible = "thead,th1520-dwcmshc";
- reg = <0xff 0xe70a0000 0x0 0x10000>;
- interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdhci_clk>;
- clock-names = "core";
- status = "disabled";
- };
-
timer0: timer@ffefc32000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32000 0x0 0x14>;
diff --git a/dts/upstream/src/sh/j2_mimas_v2.dts b/dts/upstream/src/sh/j2_mimas_v2.dts
index fa9562f..faf884f 100644
--- a/dts/upstream/src/sh/j2_mimas_v2.dts
+++ b/dts/upstream/src/sh/j2_mimas_v2.dts
@@ -71,8 +71,6 @@
#address-cells = <1>;
#size-cells = <0>;
- spi-max-frequency = <25000000>;
-
reg = <0x40 0x8>;
sdcard@0 {