Squashed 'dts/upstream/' changes from aaba2d45dc2a..b35b9bd1d4ee

b35b9bd1d4ee Merge tag 'v6.8-dts-raw'
1f50937554b4 Merge tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
576ba37bcbf9 Merge tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
c83dc02bae3e Merge tag 'qcom-arm64-fixes-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
fb254675a395 ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix
c748b8a7dbe8 Merge tag 'tegra-for-6.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
a2e893adde74 Merge tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
abb0f1b369e4 Merge tag 'qcom-arm64-fixes-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
f143aa9a89ec Revert "arm64: dts: qcom: msm8996: Hook up MPM"
9a5690b7be49 arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed
ca6dcb63bd34 arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
8532bb680bd0 dt-bindings: net: renesas,ethertsn: Document default for delays
42569705a4a0 Merge tag 'v6.8-rc6-dts-raw'
06c62487a0b4 arm64: dts: imx8mp: Fix LDB clocks property
7c93039778e4 arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
7f9a36c5ce39 ARM: dts: imx7: remove DSI port endpoints
87ea8526eaf3 Merge tag 'loongarch-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
d4a4b892cd33 Merge tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
4faf103c7468 Merge tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
c1858748b935 Merge tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
f1bb487d660f LoongArch: dts: Minor whitespace cleanup
b60485a78d66 Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
d641a222a5d4 arm64: tegra: Fix Tegra234 MGBE power-domains
31aeabc2669e ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
8c5d69d4f1e9 arm64: dts: qcom: Fix interrupt-map cell sizes
43b35c5b7347 arm: dts: Fix dtc interrupt_map warnings
f00ce91341b9 arm64: dts: Fix dtc interrupt_provider warnings
c21ad68d3254 arm: dts: Fix dtc interrupt_provider warnings
20a9f605f025 Merge tag 'v6.8-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
1d9be1dcae7c Merge tag 'imx-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
c27426925b7b Merge tag 'v6.8-rc5-dts-raw'
582c3e28f603 Merge tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
81da29f3007e arm64: tegra: Set the correct PHY mode for MGBE
30e4bc5d76ff Merge tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
f0c34a9f448e riscv: dts: sifive: add missing #interrupt-cells to pmic
db36be2a8839 arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
ec7d411e57d6 arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
105b1e4e5e28 arm64: dts: rockchip: set num-cs property for spi on px30
a05f0ca9a008 arm64: dts: rockchip: minor rk3588 whitespace cleanup
41d6b3786aa9 riscv: dts: starfive: replace underscores in node names
910c8965eb0c dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
d78e8a541b0a net: marvell,prestera: Fix example PCI bus addressing
b40e56bea854 ASoC: dt-bindings: google,sc7280-herobrine: Drop bouncing @codeaurora
48b3246a26fe Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
a1c414f8f89a Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
768ad06f1efa arm64: dts: tqma8mpql: fix audio codec iov-supply
77040f90f388 Merge tag 'v6.8-rc3-dts-raw'
65143ffc8608 arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
39497955d1c0 ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
610e244453be arm64: dts: rockchip: Fix the num-lanes of pcie3x4 on Cool Pi CM5 EVB
d6e600aea013 arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB
6be17990ec10 arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi CM5 EVB
77765eecb670 arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi 4B
7bca62b5ae66 arm64: dts: qcom: sm6115: Fix missing interconnect-names
b2bc58ba4504 arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC
9474eb5c3d86 ALSA: Various fixes for Cirrus Logic CS35L56 support
1e8df48d4da1 dt-bindings: tpm: Drop type from "resets"
4d5c46ab184f dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints
fede8bd8306c dt-bindings: xilinx: replace Piyush Mehta maintainership
eb691d1ece78 Merge tag 'v6.8-rc2-dts-raw'
5b093a56e797 ASoC: sun4i-spdif: Add Allwinner H616 compatible
f2ce9dca7322 ASoC: sun4i-spdif: Fix requirements for H6
fd23c7505f20 arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
cfbd9243ac13 arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
101ce3470b0e Merge tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm
71ca3bf1c96e Merge tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
74c898882ebb riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint format
28b77b56d972 arm64: dts: rockchip: mark system power controller on rk3588-evb1
986a9f1778ef Merge tag 'samsung-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
6cf0227916ec arm64: dts: Fix TPM schema violations
60245a9006e9 ARM: dts: Fix TPM schema violations
92924d8db61a Merge tag 'exynos-drm-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
3b240d0d94a9 dt-bindings: media: Remove K3 Family Prefix from Compatible
186b38b97035 ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
c4f0c99dffb8 arm64: dts: exynos: gs101: comply with the new cmu_misc clock names
429796fee0f1 dt-bindings: clock: gs101: rename cmu_misc clock-names
80d76b25d32f Merge tag 'v6.8-rc1-dts-raw'
339d8d1caab5 Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
df1980733ce9 Merge tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
8c23badf69c3 Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
d5a95e32a555 Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
815e38060bf4 Merge tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
f07a1b362766 Merge tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
9411a3099e9c Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
fcb7108dc362 Merge tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
8e06ce5908ff Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
7b18579c0bef Merge tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
dd4871a00012 Merge tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
8dfd2acd2c0c Merge tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
736ecd5cf03c Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
7d29a06cb311 dt-bindings: i2c: document st,stm32mp25-i2c compatible
365a95704e98 dt-bindings: at24: add ROHM BR24G04
05d2a9834fd6 Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
70a7bee43907 Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
6a04bf7a4f07 Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
e0c35697cd80 Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
cf29a14b0a23 Merge tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
902219ef9ed0 Merge tag 'mailbox-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
c437f65015a8 Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
d0902d05b4a0 Merge tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
8be1d4636d32 Merge tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
6eaaddf12639 Merge tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
2cb012b6fe68 LoongArch: dts: DeviceTree for Loongson-2K2000
6ab0a6f08b83 LoongArch: dts: DeviceTree for Loongson-2K1000
491426707de1 LoongArch: dts: DeviceTree for Loongson-2K0500
c007f27059d1 dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names
d9a3ae336ecb dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names
4ee19a9d7583 dt-bindings: loongarch: Add Loongson SoC boards compatibles
3e99ee3f7c53 dt-bindings: loongarch: Add CPU bindings for LoongArch
e8bc7c9c625e dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
f5918b47370e dt-bindings: rtc: max31335: add max31335 bindings
7e34d7b53615 rtc: rv8803: add wakeup-source support
81d186f05921 Merge branch 'pci/dt-bindings'
8bd798490681 Merge branch 'pci/controller/rcar'
e166e5aad3b0 Merge branch 'pci/controller/cadence'
9de355a75fde dt-bindings: gpio: xilinx: Fix node address in gpio
28bf1e4e9775 dt-bindings: mailbox: qcom-ipcc: document the X1E80100 Inter-Processor Communication Controller
f6b31bdd3c60 dt-bindings: mailbox: add Versal IPI bindings
c3301d070937 dt-bindings: mailbox: zynqmp: extend required list
6bf977408719 dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks
b9ea63718a7e dt-bindings: mailbox: qcom,apcs-kpss-global: drop duplicated qcom,ipq8074-apcs-apps-global
e485b251a3a4 Merge tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
60edd8755b1b Merge tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
f946a0610062 Merge tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
5a9222178c60 Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
0c57fa00ac11 Merge tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
120152dd192c Merge tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
f25acec1f182 Merge tag 'gnss-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss
040b6611cd72 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
432f2b929aa4 Merge tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
5df1a59e6086 Merge tag 'linux-watchdog-6.8-rc1' of git://www.linux-watchdog.org/linux-watchdog
1d81fba29be6 Merge tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
dd7110d3d5d1 Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
c916bd7a1d38 Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm
32704b03c7ec Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
c0d1d21fe5ff dt-bindings: fpga: altera: Convert bridge bindings to yaml
86986ec77fc7 dt-bindings: fpga: Convert bridge binding to yaml
149beabce38e dt-bindings: vendor-prefixes: Add smi
da831df01407 Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
d0949aef9e29 Merge tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
c5ee04d9a430 Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
17d4b2f2c7c6 dt-bindings: riscv: Document cbop-block-size
6361e08793d7 dt-bindings: riscv: permit numbers in "riscv,isa"
99f0fa81f51f dt-bindings: riscv: cpus: Clarify mmu-type interpretation
5744984c407c ARM: dts: usr8200: Fix phy registers
fd6e692990ee dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
db07ea081cee dt-bindings: power: Clarify wording for wakeup-source property
9deb5d7e7649 Merge tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
f412e763e552 dt-bindings: mfd: sprd: Add support for UMS9620
b50b2489e1a2 dt-bindings: input: bindings for Adafruit Seesaw Gamepad
9fcf5401177c Merge patch series "riscv: hwprobe: add Zicond, Zacas and Ztso support"
6b479ffcb9ed dt-bindings: riscv: add Zacas ISA extension description
45e895d242d0 Merge remote-tracking branch 'palmer/fixes' into for-next
129abc9e5b89 Merge tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
72e795875f31 Merge tag 'mtd/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
a0d6ec02f5dd Merge tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
092d72f89f32 Merge tag 'regulator-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
f19bbcb501a1 Merge branch 'clk-rs9' into clk-next
6c5ff3361f38 Merge branches 'clk-zynq', 'clk-xilinx' and 'clk-stm' into clk-next
5348f28123c3 Merge branches 'clk-imx', 'clk-qcom', 'clk-amlogic' and 'clk-mediatek' into clk-next
dde8a0d89600 Merge branches 'clk-versa', 'clk-silabs', 'clk-samsung', 'clk-starfive' and 'clk-sophgo' into clk-next
147299598f64 dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
5e8ad2415574 dt-bindings: tpm: Document Microsoft fTPM bindings
4446def763e6 dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
d46251bba773 dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
4c0c46fcf77f dt-bindings: tpm: Consolidate TCG TIS bindings
fc825b2e9d71 dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
5d51cf126484 dt-bindings: arm: Add remote etm dt-binding
32c458bd3442 dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
c9ab453dff7c media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
481554b6b752 dt-bindings: display: panel: Add synaptics r63353 panel controller
e04e21bef16e dt-bindings: arm: merge qcom,idle-state with idle-state
452e35e6ff26 Merge tag 'irq-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
d35742374b96 dt-bindings: display: samsung,exynos-mixer: Fix 'regs' typo
ac8ffc6d0764 Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
daf5be0b133e Merge tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
b633610fad05 Revert "net: stmmac: Enable Per DMA Channel interrupt"
fc2b6856183b dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example
5c111c61a49a dt-bindings: net: snps,dwmac: per channel irq
94d319464237 ASoC: dt-bindings: move tas2563 from tas2562.yaml to tas2781.yaml
8fbbcaccc3ff Merge tag 'socfpga_dts_updates_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
1161aaee27ae dt-bindings: mmc: add Marvell ac5
e9a747531a5d dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
57b4e3b1199f Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
cab393f5e80d dt-bindings: serial: Describe ARM dcc interface
1d92607a561e dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
cee9797861a0 dt-bindings: usb: xhci: Add num-hc-interrupters definition
4823f8dd230f arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
4a4f48930e20 dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
4ddd871b77e8 arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
5598c7c58459 arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
a06133f3b90d arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
0e31729b965a arm64: dts: qcom: msm8939: Drop RPM bus clocks
a9231f1fa44d arm64: dts: qcom: sdm630: Drop RPM bus clocks
7806d0946f48 arm64: dts: qcom: qcs404: Drop RPM bus clocks
6bbd4a339ffd arm64: dts: qcom: msm8996: Drop RPM bus clocks
6c5785d4dec0 arm64: dts: qcom: msm8916: Drop RPM bus clocks
d99558e0d6ba dt-bindings: usb: qcom,dwc3: Fix SDM660 clock description
0e7834fa9ba2 dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding
f7405c1062e5 dt-bindings: connector: Add child nodes for multiple PD capabilities
a2f2b957f7b0 arm64: dts: intel: minor whitespace cleanup around '='
a21ad91a14ac arm64: dts: socfpga: agilex: drop redundant status
c64326a0161d arm64: dts: socfpga: agilex: add unit address to soc node
70eea150a8db arm64: dts: socfpga: agilex: move firmware out of soc node
056acfded5ce arm64: dts: socfpga: agilex: move FPGA region out of soc node
8e373ef160c7 arm64: dts: socfpga: agilex: align pin-controller name with bindings
56a65e118b36 arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties
5ea405da6608 arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings
0bc2b8deec9a arm64: dts: socfpga: stratix10: add unit address to soc node
3932c6fc63c2 arm64: dts: socfpga: stratix10: move firmware out of soc node
174dfac57ae2 arm64: dts: socfpga: stratix10: move FPGA region out of soc node
e63c11b1c86c arm64: dts: socfpga: stratix10: align pincfg nodes with bindings
5ad3116fb135 arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB
9185b800f9c3 arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
b3832f4d101c ARM: dts: socfpga: align NAND controller name with bindings
7772fcc4eef4 ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
f466442c93ff dt-bindings: clock: mediatek: add clock controllers of MT7988
967ed08fdbd4 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
8bb435f3ea7d dt-bindings: clock: mediatek: add MT7988 clock IDs
8b8c659b2121 dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
b822e804fd2c dt-bindings: gpio: add NPCM sgpio driver bindings
f4c19e862d2b dt-bindings: gpio: realtek: Add realtek,rtd-gpio
6690161ed7a9 Merge branches 'apple/dart', 'arm/rockchip', 'arm/smmu', 'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next
7382fa53a648 dt-bindings: net: renesas,etheravb: Document RZ/G3S support
247b8886892f dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
fec847c57a81 dt-bindings: Add MP2856/MP2857 voltage regulator device
42c42ff6c177 dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml
6c13c9d07051 dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
1e934476b96c dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
82a434279c9e dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
5fa4567d6c4f Merge tag 'v6.8-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
a04786e0b7e0 Merge tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
0bf9a2425459 Merge tag 'qcom-arm64-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
a3fde0732d5b Merge tag 'qcom-arm32-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
62073621d812 Merge tag 'arm-soc/for-6.8/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
4cfe8fd4e2b4 Merge tag 'sprd-dt-6.8-rc1' of https://github.com/lyrazhang/linux into soc/dt
a355b8e8cbdd dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
36a030b546d0 dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
ca1c0a8c8091 dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
7123707b90de dt-bindings: thermal-zones: Document critical-action
c29ec9b83fd7 dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor
5a12787401b5 dt-bindings: thermal: loongson,ls2k-thermal: Fix binding check issues
0a6d923c5231 dt-bindings: thermal: convert Mediatek Thermal to the json-schema
dc5dd3862b77 dt-bindings: input: iqs269a: Add bindings for OTP variants
5aa00301cee3 dt-bindings: input: iqs269a: Add bindings for slider gestures
c4635c803af3 Merge tag 'iio-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
571d91b8d8df arm64: dts: rockchip: Fix led pinctrl of lubancat 1
548cbdf62c21 arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
86c28823371d arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
275bc737b480 arm64: dts: rockchip: support poweroff on the rock-5b
e4f7332bb7f8 arm64: dts: rockchip: Support poweroff on Orange Pi 5
d0c46aeba839 arm64: dts: rockchip: nanopc-t6 sdmmc beautification
df73c00bc509 arm64: dts: sprd: Change UMS512 idle-state nodename to match bindings
12243eba2b74 arm64: dts: sprd: Add clock reference for pll2 on UMS512
af72bfcc73f3 arm64: dts: sprd: Removed unused clock references from etm nodes
d8f5562e697b arm64: dts: sprd: Add support for Unisoc's UMS9620
bd8f67f82f65 dt-bindings: arm: Add compatible strings for Unisoc's UMS9620
9da3db96fae0 arm64: dts: sprd: fix the cpu node for UMS512
3ebc08960525 Merge tag 'v6.7-rc7' into gpio/for-next
cb90fcbed71e dt-bindings: timer: Add StarFive JH8100 clint
6f2b19f4df72 dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
4421b3e3124f dt-bindings: iio: Add AD7091R-8
51a0454cffd6 dt-bindings: power: supply: bq24190: Add BQ24296 compatible
4639caeeab2f dt-bindings: power: reset: xilinx: Rename node names in examples
c873132667ed dt-bindings: power: reset: qcom-pon: fix inconsistent example
64cf7a912b11 arm64: dts: rockchip: Fix rk3588 USB power-domain clocks
815a2542ad42 arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts
9df823a6207b arm64: dts: rockchip: Support poweroff on NanoPC-T6
78bd00069022 arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names cleanup
9d6e0741ae7c arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
a64a2e009e21 dt-bindings: arm: rockchip: Add Cool Pi CM5
4397d62daec8 arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
f1a9c321e26f dt-bindings: arm: rockchip: Add Cool Pi 4B
1e413c69529f dt-bindings: vendor-prefixes: Add Cool Pi
a67ded35095e arm64: dts: rockchip: add gpio-line-names to rk3328-rock-pi-e
e0ec5767b690 ARM: dts: rockchip: Remove rockchip,default-sample-phase from rk3036.dtsi
75e0afe6681c ARM: dts: rockchip: Add stdout-path for rk3036 kylin
5b38dc06a1e9 dt-bindings: watchdog: qcom,pm8916-wdt: add parent spmi node to example
d2f78877f2ea dt-bindings: watchdog: nxp,pnx4008-wdt: convert txt to yaml
af1fdc5cd02d dt-bindings: watchdog: qca,ar7130-wdt: convert txt to yaml
5c3d9631b9ac dt-bindings: watchdog: intel,keembay: reference common watchdog schema
6d86f883fd9c dt-bindings: watchdog: re-order entries to match coding convention
e28051167c06 dt-bindings: touchscreen: neonode,zforce: Use standard properties
3119a224ac1c dt-bindings: touchscreen: convert neonode,zforce to json-schema
15bf36928144 Merge tag 'icc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
dd37eb39a550 dt-bindings: input: convert drv266x to json-schema
795f4eddfec7 Merge tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
991ab34b2120 Merge tag 'reset-for-v6.8' of git://git.pengutronix.de/pza/linux into soc/drivers
4e7b4659bc67 dt-bindings: mtd: partitions: u-boot: Fix typo
35dd951a7fd5 Merge tag 'riscv-cache-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
69b18d58cc6d Merge tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
fc5aa9bf69fd Merge tag 'samsung-drivers-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
84c9739eb5b5 Merge tag 'qcom-drivers-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
0ef14d7a1f46 dt-bindings: crypto: qcom-qce: document the SC7280 crypto engine
2fd8394e6d9f dt-bindings: crypto: qcom-qce: constrain clocks for SM8150-compatible QCE
40fd9d4f3234 dt-bindings: crypto: qcom-qce: constrain clocks for IPQ9574 QCE
30960ac02d6e dt-bindings: rng: starfive: Add jh8100 compatible string
e6272a79f69c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
dcd8ac1c5dd8 dt-bindings: spi: stm32: add st,stm32mp25-spi compatible
87166d1d3f3f Merge tag 'riscv-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
69abc2365d38 dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding
822a13d2bf90 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible
6722c7fe2a57 dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible
a38a399bccf1 dt-bindings: phy: mediatek: tphy: add a property for force-mode switch
ca521e2ecf25 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header
aa156a9707ec Merge tag 'amlogic-arm64-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
e6127e00f352 Merge tag 'mvebu-dt64-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
aad08c0a0671 Merge tag 'mvebu-dt-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
e4320c558711 Merge tag 'samsung-dt64-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
077793e138f6 Merge tag 'qcom-arm32-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
7ff5e1692425 Merge tag 'ti-k3-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
f009c98b2a3f dt-bindings: iio: dac: add MCP4821
e46c2c536959 Merge tag 'ti-keystone-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
edeab43af36b Merge tag 'zynqmp-dt-for-6.8' of https://github.com/Xilinx/linux-xlnx into soc/dt
4e78ad68f722 Merge tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
f4ece4b3d883 Merge tag 'imx-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
1a2b6b1db701 Merge tag 'imx-bindgins-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
71e20fbc3d5b Merge tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
056c9efa37c5 Merge tag 'renesas-dts-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
339491d0999f Merge tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
06086605676a dt-bindings: dma: fsl-edma: Add fsl-edma.h to prevent hardcoding in dts
640904451ab8 dt-bindings: dmaengine: Add Loongson LS2X APB DMA controller
f88d59ec5d12 Merge tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
e833ff47f9b9 Merge tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
9f821c027b01 Merge tag 'juno-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
4bab8a451f49 Merge tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
a4789dd06449 Merge tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
5045526f0b7c Merge tag 'mtk-dts64-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
a7603f8260b8 Merge tag 'samsung-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
16a1d6e0b098 Merge tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
0f1f66f39700 ARM: dts: ste: minor whitespace cleanup around '='
22532c5d3f4a Merge tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
5288e13a2ad4 Merge tag 'hisi-arm64-dt-for-6.8' of https://github.com/hisilicon/linux-hisi into soc/dt
f44f238cabce Merge tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
61f41fa45eaf Merge tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
07d575b06ff9 dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
fc02de1f5dc0 dt-bindings: riscv: cpus: Add AMD MicroBlaze V compatible
780449a81d3c dt-bindings: pwm: remove Xinlei's mail
f96dd7edb887 arm64: dts: qcom: sc8180x: Fix up PCIe nodes
b1ecf20e17e0 arm64: dts: qcom: sc8180x: Mark PCIe hosts cache-coherent
eeed8f113289 dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp
2ef9211e8711 dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent
188c161805d3 dt-bindings: pinctrl: qcom: drop common properties
7834682c0d2c dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings
c31ea3c9600f dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts
6cec6f6f090c dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts
ef7b1c134921 dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts
a3abecdd0e2e dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts
2b1d1c0dd621 dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts
36f8bb953634 dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts
670ced18d87f dt-bindings: pinctrl: qcom: create common LPASS LPI schema
5ca197c58799 dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
8d27a131f7ad dt-bindings: pinctrl: qcom,pmic-mpp: clean up example
6674c2217ce1 Merge tag 'mediatek-drm-next-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
d7dde4a72dfa Merge tag 'drm-msm-next-2023-12-15' of https://gitlab.freedesktop.org/drm/msm into drm-next
64ddcb330a18 arm64: dts: qcom: x1e80100-qcp: Fix supplies for some LDOs in PM8550
206ab99c38ce arm64: dts: qcom: sm8550: Update idle state time requirements
319f395fbc2a arm64: dts: qcom: sm8550: Separate out X3 idle state
af2f75b56294 ARM: dts: qcom: sdx55: Fix the base address of PCIe PHY
4a72661b117b arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK
5b72e989a37a arm64: dts: qcom: x1e80100: align mem timer size cells with bindings
b17d7383c10f arm64: dts: qcom: sc7280: Mark SDHCI hosts as cache-coherent
3840ead2163a ARM: dts: qcom: sdx55: fix USB SS wakeup
9e773fad2487 ARM: dts: qcom: sdx55: fix USB DP/DM HS PHY interrupts
d0728def7588 ARM: dts: qcom: sdx55: fix pdc '#interrupt-cells'
0ee9dac79d46 ASoC: qcom: add sound card support for SM8650
345b970f1857 add es8326 dt-bindings, commonize headset codec
85a45459eeed GPIO inclusion fixes to misc sound drivers
616e88e1109d arm64: dts: qcom: sc8180x: fix USB SS wakeup
f3d1b2acf659 arm64: dts: qcom: sdm670: fix USB SS wakeup
987f42804a25 arm64: dts: qcom: sdm670: fix USB DP/DM HS PHY interrupts
2e58236aa851 ASoC: dt-bindings: qcom,lpass-va-macro: remove spurious contains in if statement
bded77d8cc7b dt-bindings: regulator: qcom,usb-vbus-regulator: clean up example
e1481a467961 powerpc/fsl: Fix fsl,tmu-calibration to match the schema
26e2fad496d4 arm64: dts: amlogic: fix format for s4 uart node
8a5115be3855 arm64: dts: amlogic: drop redundant status=okay
799049c22bf2 arm64: dts: amlogic: enable some nodes for board AQ222
3fea93dcdd73 arm64: dts: amlogic: add some device nodes for S4
44721ac7f4da Merge tag 'drm-misc-next-2023-12-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
d623bb97a280 Merge tag 'samsung-pinctrl-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
81d84dd62616 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS WSA
4f673348bd77 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS VA
d5b1bc404268 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS TX
40420db77069 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS RX
605001444f21 ASoC: dt-bindings: qcom,sm8250: Add X1E80100 sound card
4e179f2c3905 ASoC: dt-bindings: mt8188-mt6359: add es8326 support
0c819517fcb2 ASoC: dt-bindings: qcom,sm8250: document SM8650 sound card
0292b51ac8c4 ASoC: tegra: tegra20_ac97: Convert to use GPIO descriptors
4c6bc6503e5e Merge tag 'device_is_big_endian-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into gpio/for-next
31d8096d43a1 dt-bindings: gpio: dwapb: allow gpio-ranges
873d4c02bbfa dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
bfc73914844a dt-bindings: clock: si5351: add PLL reset mode property
af0493badd9d dt-bindings: clock: si5351: convert to yaml
d1a5fb288be1 dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform
ee353e29bfb4 dt-bindings: clk: rs9: Add 9FGV0841
48b20705829d dt-bindings: clock: brcm,kona-ccu: convert to YAML
b2b282bb3ba9 dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema
e35ce136c12f dt-bindings: clock: xilinx: add versal compatible
746818ace7a3 dt-bindings: rtc: Add Nuvoton ma35d1 rtc
d8c717fd9bc8 dt-bindings: Remove alt_ref from versal
e9caccbf099c arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting
b616df631790 arm64: dts: qcom: sc8180x: Describe the GIC redistributor
ae7e39a80f0f arm64: dts: qcom: sc8180x: Add interconnects to UFS
0f32e7aa54e0 arm64: dts: qcom: sc8180x: Add missing MDP clocks
3641f17d731d arm64: dts: qcom: sc8180x: Add UFS GDSC
2bbb23973697 arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
a5b4605b6fc6 ARM: dts: qcom: msm8974*: Re-enable remoteprocs on various boards
f1ecb44efc55 ARM: dts: qcom: msm8974: Remove bogus cd-gpio pinctrl
9dd85d38d004 ARM: dts: qcom: msm8974-klte: Remove unused property
34c2fdcebf94 arm64: dts: qcom: sc7280: Rename reserved-memory nodes
84a50703ca7d dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
47f83514132e dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
1dce719ef64f arm64: dts: qcom: sc7280: Remove unused second MPSS reg
afedac693f18 arm64: dts: qcom: sdm670: add display subsystem
1d8d2d147ea5 dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
3ea56a52a7c2 dt-bindings: wdt: Add ts72xx
18522cdf3ec6 dt-bindings: watchdog: dlg,da9062-watchdog: Document DA9063 watchdog
688fe0bdd724 dt-bindings: watchdog: dlg,da9062-watchdog: Add fallback for DA9061 watchdog
9054003bb13e dt-bindings: watchdog: mediatek,mtk-wdt: add MT7988 watchdog and toprgu
63d466a6e3b3 dt-bindings: watchdog: realtek,rtd1295-watchdog: convert txt to yaml
5b6c41392896 dt-bindings: watchdog: qcom-wdt: Make the interrupt example edge triggered
4f8423c375eb dt-bindings: iio: chemical: add aosong,ags02ma
766801c2fc4b dt-bindings: vendor-prefixes: add aosong
530dcc2cff54 arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
a63d7ac5c9ca arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
6177bf5ba3b4 arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
cccb449ab331 arm64: dts: qcom: sm8150: add DisplayPort controller
414013ad4921 arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
94e5a8422a14 arm64: dts: qcom: sm8150-hdk: enable HDMI output
94cd2b0ff062 arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
d8577fce5e20 arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes
e14f9c1044bd arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
66e97e0962a7 arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
6437200479ec arm64: dts: qcom: qcm2290: Hook up MPM
75b87eb7e3ee arm64: dts: qcom: msm8996: Hook up MPM
e043072a3a33 arm64: dts: qcom: sm6375: Hook up MPM
623a6180066f dt-bindings: arm: qcom: Add Motorola Moto G 4G (2013)
030e5c73208a arm64: dts: qcom: x1e80100-crd: Fix supplies for some LDOs in PM8550
58e87053c1f0 arm64: dts: qcom: sc7280: add QCrypto nodes
6d138c9b4127 arm64: dts: qcom: sc7180: Switch pompom to the generic edp-panel
9248e79cd654 arm64: dts: qcom: sm8150: fix USB SS wakeup
8143f0f67202 arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts
1d46c82d351b arm64: dts: qcom: sdm845: fix USB SS wakeup
5c261eb8cd11 arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY interrupts
2998fdbc15fe arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts
220ee261025f arm64: dts: qcom: sm8550: drop unneeded assigned-clocks from codec macros
ef2823c0a498 arm64: dts: qcom: sm8550: move Soundwire pinctrl to its nodes
611112fa3972 arm64: dts: qcom: sm8450: drop unneeded assigned-clocks from codec macros
7fe6ee08b28c arm64: dts: qcom: sm8450: move Soundwire pinctrl to its nodes
eb6e95625c03 arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration
6f45533e32ad arm64: dts: qcom: sm8650: drop unneeded assigned-clocks from WSA macro
108c60eb7746 dt-bindings: arm: qcom: Fix up htc-memul compatible
c493fe546f0a arm64: dts: qcom: sm6115: Hook up interconnects
fd22f3a58a9e Merge branch 'icc-sm6115' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into HEAD
85a531800a07 ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree
9c323b20cda8 ARM: dts: qcom: ipq4019: add dedicated SDHCI compatible
2fcaa70bfc3c arm64: dts: qcom: ipq8074: add dedicated SDHCI compatible
757c981838e3 arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports
34e4f27862d1 arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property
61e7df01e058 arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property
786be94e8465 arm64: dts: qcom: qrb5165-rb5: add the Bluetooth node
fe9d727180d2 arm64: dts: qcom: sa8775p: Add missing space between node name and braces
8df2548eb151 arm64: dts: qcom: Use "pcie" as the node name instead of "pci"
756ec289cf35 ARM: dts: qcom: Use "pcie" as the node name instead of "pci"
2066a55949a7 arm64: dts: qcom: acer-aspire1: Add sound
90485d1f88ce arm64: dts: qcom: acer-aspire1: Correct audio codec definition
3d97796b14f9 arm64: dts: qcom: acer-aspire1: Enable RTC
5d870a6a209b arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings
1e57f262d57c arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings
731a9974488a arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings
8a512baad9fa arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings
9c4063711b1f arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings
79c130d88048 arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings
65d88afa8518 arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings
fa34450ebcf9 arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings
2d00768d0566 arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings
6d501541ab8b arm64: dts: qcom: sm8450-hdk: Enable the A730 GPU
9999a06044c2 arm64: dts: qcom: sm8550-mtp: Enable the A740 GPU
1c8862cd1be0 arm64: dts: qcom: sm8550-qrd: Enable the A740 GPU
db2dd74a4321 arm64: dts: qcom: sm8550: Add GPU nodes
41411e46e180 arm64: dts: qcom: sm8450: Add GPU nodes
67082abed4d1 arm64: dts: qcom: msm8939: Make blsp_dma controlled-remotely
b0768548dacf arm64: dts: qcom: msm8916: Make blsp_dma controlled-remotely
e529c8cd00c4 arm64: dts: qcom: msm8939: Add clock-frequency for broadcast timer
dc95d696633b arm64: dts: qcom: Add missing vio-supply for AW2013
ce476167f046 arm64: dts: qcom: ipq6018: Add QUP5 SPI node
4723cf41be1a arm64: dts: qcom: ipq6018: Add remaining QUP UART node
af3ecf0ef5eb Merge branch '20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com' into clk-for-6.8
eeb32e2a4dbd dt-bindings: clock: Update the videocc resets for sm8150
c591d3616c87 arm64: dts: qcom: qrb4210-rb2: Enable MPSS and Wi-Fi
479632ff42dd arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration
4c12613ce6e0 ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node name
e55cb89e6ef8 ARM: dts: imx25: Remove unneeded keypad properties
610b835be6b9 dt-bindings: net: marvell,orion-mdio: Drop "reg" sizes schema
5605354f949e arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default
bb83d09752aa arm64: dts: imx8qxp: Add VPU subsystem file
11f5b7454c94 arm64: dts: imx8qxp-mek: Move port under USB connector
f6d6c203902d arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup
643674137f59 dt-bindings: PCI: qcom: Document the SM8650 PCIe Controller
ddec040496f1 dt-bindings: PCI: dwc: rockchip: Document optional PCIe reference clock input
2d8a490fd767 dt-bindings: PCI: qcom: Correct reset-names property
2bdefbbe9381 dt-bindings: PCI: qcom: Correct clocks for SM8150
01ce80af6cc2 dt-bindings: PCI: qcom: Correct clocks for SC8180x
9c60f1faccc9 dt-bindings: PCI: qcom: Adjust iommu-map for different SoC
c78e4dd9c7c0 arm64: dts: rockchip: make use gpio-keys for buttons on puma-haikou
146cf4124863 arm64: dts: rockchip: expose BIOS Disable feedback pin on rk3399-puma
26575df71b2d arm64: dts: rockchip: fix misleading comment in rk3399-puma-haikou.dts
93c2098cfa35 ARM: dts: ux500-href: Switch HREF520 to AB8505
488dc522177c ARM: dts: ux500-href: Push AB8500 config out
7acade644174 ARM: dts: ux500-href: Push AB8500 inclusion to the top
0043c908a991 dt-bindings: connector: usb: add accessory mode description
7b7f80d863a5 arm64: dts: rockchip: Add vop on rk3588
ef9ea9ea51ca arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode
a843a4a028e7 arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode
83869275890f arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode
237d1d3aa847 arm64: dts: ti: k3-am6*: Add additional regs for DMA components
6540bf190683 arm64: dts: ti: k3-j7*: Add additional regs for DMA components
f584859d0f96 arm64: dts: ti: k3-am65: Add additional regs for DMA components
e76881a36a46 arm64: dts: cn913x: add device trees for COM Express boards
a57b87e79272 dt-bindings: arm64: add Marvell COM Express boards
22b670935a1f arm64: dts: armada-3720-turris-mox: set irq type for RTC
6b8494ce5492 ARM64: dts: Add special compatibles for the Turris Mox
8fcbbd77bc4f ARM64: dts: marvell: Fix some common switch mistakes
61b4fbe68e70 ARM: dts: marvell: make dts use gpio-fan matrix instead of array
1a025bb583e1 ARM: dts: marvell: Fix some common switch mistakes
283f9ebb847c dt-bindings: serial: Add a new compatible string for UMS9620
42414ddb491a dt-bindings: serial: imx: Properly describe the i.MX1 interrupts
a5b226724ae1 dt-bindings: usb: qcom,dwc3: Add X1E80100 binding
a94c79572ac2 dt-bindings: usb: Document WCD939x USB SubSystem Altmode/Analog Audio Switch
6c2112d5f3f3 arm64: dts: qcom: qrb5165-rb5: use u16 for DP altmode svid
79493bc9fc10 dt-bindings: connector: usb: add altmodes description
a98f9ad936ee dt-bindings: usb: nxp,ptn5110: Fix typos in the title
da44f4e15545 dt-bindings: usb: genesys,gl850g: Document 'peer-hub'
c32fd07e4010 dt-bindings: nvmem: add new stm32mp25 compatible for stm32-romem
cc8835249ffb ARM: dts: stm32: add dcmipp support to stm32mp135
dc483bc0495b dt-bindings: gnss: u-blox: add "reset-gpios" binding
82239f64506f dt-bindings: iommu: rockchip: Add Rockchip RK3588
b10f7d79bc86 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
e39b04bbed6e Merge branch 'icc-qcm2290' into icc-next
c95f389c0366 Merge branch 'icc-sm6115' into icc-next
b1f1b32e611b dt-bindings: PCI: rcar-pci-host: Add optional regulators
51eab76bc15c arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box
8f65017d5eb4 dt-bindings: arm: sunxi: document Transpeed 8K618-T board name
a043657dff28 dt-bindings: vendor-prefixes: add Transpeed
b9b13eec182f arm64: dts: st: add bsec support to stm32mp25
4ba9da13226a ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15
3cd8f921b287 ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles
9d7cd7004fbc dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles
3409584c8b1b ARM: dts: stm32: minor whitespace cleanup around '='
46d3a566ba35 regulator: dt-bindings: qcom,rpmh: add compatible for pm8010
b876feae34ef ASoC: dt-bindings: audio-graph-port: Document new DAI link flags playback-only/capture-only
b0c246496fbc dt-bindings: display: msm: dp: declare compatible string for sm8150
363bcab6054e scsi: ufs: qcom: dt-bindings: Add SC7280 compatible string
3d1e051b5db8 arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector
ef545aff5ca3 arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
13069c168986 arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description
c92840a54a7a arm64: dts: imx8mp-venice: Fix USB connector description
d0235ca7db0f arm64: dts: imx8mp-verdin: Fix USB connector description
8e6a721ca452 arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node
7662ace2b978 arm64: dts: imx8mn-evk: Move port under USB connector
92576b82f349 arm64: dts: imx8mm-evk: Move port under USB connector
91c629656840 arm64: dts: freescale: introduce dimonoff-gateway-evk board
8b75c148251b dt-bindings: arm: fsl: add Dimonoff gateway EVK board
192ca710eafd dt-bindings: vendor-prefixes: add dimonoff
edc62a2939e3 arm64: dts: imx8m*-tqma8m*: Add chassis-type
d35e9fd630d7 arm64: dts: imx8mn-beacon: Support overdrive mode
a684f6ef9a40 arm64: dts: imx8mn: Enable Overdrive mode
0c6ce8fb001d arm64: dts: imx8mm-beacon: Enable overdrive mode
42e3d3eaa3cb arm64: dts: imx8mm: Add optional overdrive DTSI
f9b749293626 arm64: dts: imx8mm: Reduce GPU to nominal speed
aadc35d489bd arm64: dts: imx93: Fix the micfil clock-names entries
f8b732c140f6 ARM: dts: imx23/28: Fix the DMA controller node name
9697ec153a9c ARM: dts: imx23-sansa: Use preferred i2c-gpios properties
62875ee7373e ARM: dts: imx27-apf27dev: Fix LED name
6bd0d6d0fb3d ARM: dts: imx25/27: Pass timing0
3cd4341f361d ARM: dts: imx25: Fix the iim compatible string
52eef6a12e21 arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support
b0f009ddef83 arm64: dts: exynos: google: Add initial Google gs101 SoC support
7932b36aab04 dt-bindings: arm: google: Add bindings for Google ARM platforms
c439b1ecd46b dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings
5114ddf2754e dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes
5142777cc846 arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin control
9c5b72f0dbf7 arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces
c20cd1060c83 arm64: dts: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities
d1702886b9b1 arm64: dts: renesas: r9a08g045: Add Ethernet nodes
c8bc29914258 arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node
2ac19b878bcd arm64: zynqmp: Add missing destination mailbox compatible
bfda609d3986 arm64: zynqmp: Fix clock node name in kv260 cards
bf79a715a44c arm64: zynqmp: Move fixed clock to / for kv260
067130bf35dd dt-bindings: soc: Add new board description for MicroBlaze V
3909199b5365 dt-bindings: soc: xilinx: Move xilinx.yaml from arm to soc
5a30f0c409d5 arm64: xilinx: Remove address/size-cells from gem nodes
c7afa96873c9 arm64: xilinx: Remove address/size-cells from flash node
e3a99f7f8d11 arm64: xilinx: Put ethernet phys to mdio node
6f4a9a0c8df9 arm64: xilinx: Remove mt25qu512a compatible string from SOM
e3823e6a85e8 arm64: xilinx: Use lower case for partition address
ee878ab978b7 arm64: xilinx: Do not use '_' in DT node names
edb56e5ac871 riscv: dts: starfive: Enable SDIO wifi on JH7100 boards
738fd2fd6271 riscv: dts: starfive: Enable SD-card on JH7100 boards
4a3456d5f756 riscv: dts: starfive: Add JH7100 MMC nodes
0b98a998f256 riscv: dts: starfive: Add pool for coherent DMA memory on JH7100 boards
b7e59570a83e riscv: dts: starfive: Add JH7100 cache controller
0e3644417255 riscv: dts: starfive: Mark the JH7100 as having non-coherent DMAs
2ce3980ca0ba riscv: dts: starfive: Group tuples in interrupt properties
21bb4608c1f4 arm64: dts: ti: k3-am62-main: Add GPU device node
21dbc3bb6085 dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance
0a5288800340 dt-bindings: rockchip,vop2: Add more endpoint definition
689213783aed dt-bindings: display: vop2: Add rk3588 support
d06f02a431a5 dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6115 bwmon instance
a67732e07f79 arm64: dts: fsd: Add MFC related DT enteries
a8f325704092 arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode
c33d48e723e9 arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE0 Endpoint Mode
411f344456e4 arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs
e88109a7ea70 arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC
8203df16463f arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC
12693cd3a151 arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs
022683d6bab2 arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs
b13637076b0a arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs
073920a8e469 spi: dw: Remove Intel Thunder Bay SOC support
853b38b4ccbe dt-bindings: media: s5p-mfc: Add mfcv12 variant
af1444135df0 dt-bindings: soc: rockchip: add rk3588 vop/vo syscon
ea9d3ade1f63 media: dt-bindings: Add OmniVision OV64A40
eac07152e0b8 media: dt-bindings: media: imx335: Add supply bindings
37535c00a2ec media: dt-bindings: gc0308: add binding
9be8a81b5d55 media: dt-bindings: ov8856: decouple lanes and link frequency from driver
e78a33d58798 media: dt-bindings: alvium: add document YAML binding
123e53dddda5 dt-bindings: vendor-prefixes: Add prefix alliedvision
5367c47d39ee media: dt-bindings: ak7375: Add ak7345 support
33368f1c353f dt-bindings: mfd: pm8008: Clean up example node names
2ab5a6b315e7 dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
fa6a05463677 dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
44e89edff478 dt-bindings: leds: awinic,aw200xx: Add AW20108 device
6cd025d35790 dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
65b3a1cec5b9 dt-bindings: leds: aw200xx: Introduce optional enable-gpios property
48e46bb513fb dt-bindings: leds: Add Allwinner A100 LED controller
193b43eae00d dt-bindings: leds: Fix JSON pointer in max-brightness
ac28e493721a ARM: dts: imx25: Move usbphy nodes out of simple-bus
90f8840e451d ARM: dts: imx1: Use 'bus' for AIPI bus
dfc79426f635 ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus
92c19f27621f ARM: dts: imx27-pdk: Move usbphy0 out of simple-bus
09cddc0d2c3d ARM: dts: imx27: Use 'bus' for EMI bus
e7cd1893e9ea ARM: dts: imx27: Use 'bus' for AIPI bus
81e952ba68c6 media: dt-bindings: media: i2c: Add bindings for TW9900
2ed7758d7c0a dt-bindings: vendor-prefixes: Add techwell vendor prefix
9b5febaeea2a arm64: dts: freescale: add fsl-lx2160a-mblx2160a board
c763b70a3ecc dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards
6c6fc780325f ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix
2571ab1025eb ARM: dts: imx1: Fix sram node
c64c46277345 ARM: dts: imx27: Fix sram node
4606862f29a7 ARM: dts: imx: Use flash@0,0 pattern
e9c196aff7af ARM: dts: imx25/27-eukrea: Fix RTC node name
34087a021485 ARM: dts: imx25-pdk: Pass #sound-dai-cells
f91e9208f059 ARM: dts: imx25: Pass I2C clock-names property
cb93e178f443 arm64: dts: freescale: imx93: add i3c1 and i3c2
3b2d451cf59f arm64: dts: ls1012a: Remove big-endian from thermal
25e47251c772 dt-bindings: input: microchip,cap11xx: add advanced sensitivity settings
a0fb1bc7fd22 Merge tag 'exynos-drm-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
aae3e1a63026 dt-bindings: riscv: add Zfa ISA extension description
ab9eea090f24 dt-bindings: riscv: add Zvfh[min] ISA extension description
7a64028da27c dt-bindings: riscv: add Zihintntl ISA extension description
f4789213e5b6 dt-bindings: riscv: add Zfh[min] ISA extensions description
c5de05064f79 dt-bindings: riscv: add vector crypto ISA extensions description
215c236fe6da dt-bindings: riscv: add scalar crypto ISA extensions description
1a96ef0c118a Merge tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
6dbce6382acc Merge tag 'pef2256-framer' into devel
1c566bdd0e0f dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer
0e2e3f19a42d arm64: dts: rockchip: Add Anbernic RG351V
aa1c981f085f arm64: dts: rockchip: Split RG351M from Odroid Go Advance
5985d0436d7f dt-bindings: arm: rockchip: Add Anbernic RG351V
dddd8bf614e2 arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards
e79626358af1 arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards
c2bbb4cb37ce arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30
5df2cd229ef2 arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328
773747ea9224 arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368
c47780f2190d arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399
0e5a28940713 arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
51d3d03836a0 arm64: dts: rockchip: add gpio alias for gpio dt nodes
5fcf2d67aa35 arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU
80e922961b8e arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi
8f3fbd13ee16 arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi
15b3dffcbe21 arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi
095c6f3ed2af arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi
5dc789289ead arm64: dts: rockchip: add Theobroma Jaguar SBC
bc75d639d8bd dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC
3c240c87c027 arm64: dts: rockchip: Add Powkiddy X55
2496d275584a dt-bindings: arm: rockchip: Add Powkiddy X55
517f4adf026d arm64: dts: rockchip: add USB3 host to rock-5a
d474a82f6b8f arm64: dts: rockchip: add USB3 host to rock-5b
4bf4fdf576e0 arm64: dts: rockchip: add missing tx/rx-fifo-depth for rk3328 gmac
56e0ff652ec1 arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s
36bdcd2e79dd ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin
bd117185d559 ARM: dts: rockchip: fix rk3036 hdmi ports node
2127f8eafedb dt-bindings: clock: google,gs101: fix incorrect numbering and DGB suffix
fff73dbf51fc dt-bindings: soc: samsung: usi: add google,gs101-usi compatible
37ffa8542576 dt-bindings: serial: samsung: Make samsung,uart-fifosize a required property
fd8ed4626aeb dt-bindings: serial: samsung: Add google-gs101-uart compatible
33bfe5e1dc68 dt-bindings: watchdog: Document Google gs101 watchdog bindings
e6381c01b68b riscv: dts: thead: Enable LicheePi 4A eMMC and microSD
3bd0505c030a riscv: dts: thead: Enable BeagleV Ahead eMMC and microSD
a53de85228bf riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock
fd1214b13ed4 ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
5d2956b92dea dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
402b4259739c dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S
150ddb24b2f0 Merge tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
64011b700499 dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU
a5ab14d25e79 dt-bindings: arm-smmu: Add compatible for X1E80100 SoC
aaa9819e17c5 dt-bindings: iommu: arm,smmu: document the SM8650 System MMU
c04ccbbeb58a dt-bindings: iommu: arm,smmu: document clocks for the SM8350 GPU SMMU
b73f681e020f arm64: dts: juno: Align thermal zone names with bindings
8762e182cc34 dt-bindings: hwmon: Add lltc ltc4286 driver bindings
7711cd743748 Merge tag 'exynos-drm-next-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
0c9c816dddb4 Backmerge tag 'v6.7-rc5' into drm-next
cc330eac5dd3 dt-bindings: iio: humidity: Add TI HDC302x support
07a88600291a dt-bindings: iio: light: add ltr390
a803f8c65ec8 dt-bindings: iio: pressure: add honeywell,hsc030
49600f0eeb26 dt-bindings: iio: temperature: add MLX90635 device
5f69a9e8d3dd dt-bindings: hwmon: Increase max number of io-channels
565f404ae838 dt-bindings: hwmon: Add mps mp5990 driver bindings
ad5cba1ee29a ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8650 LPASS WSA
880126e66fb3 ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8650 LPASS VA
19ed8a218bd9 ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8650 LPASS TX
322423704418 ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8650 LPASS RX
f09397ff6cbf dt-bindings: dma: Add dma-channel-mask to nvidia,tegra210-adma
6263d2ffbb0f dt-bindings: dma: sf-pdma: add new compatible name
7581e8bd108d arm64: dts: mediatek: mt8192: Add Smart Voltage Scaling node
de53c9a33f27 arm64: dts: mediatek: mt8195: Add SVS node and reduce LVTS_AP iospace
53ceb33cc2de arm64: dts: mediatek: mt8183: Change iospaces for thermal and svs
d305525393a4 arm64: dts: mediatek: mt8186: fix address warning for ADSP mailboxes
d4dbd2b56a9f arm64: dts: mediatek: mt8186: Fix alias prefix for ovl_2l0
209e23166717 arm64: dts: mt6358: Drop bogus "regulator-fixed" compatible properties
b5aaf3dc3cc4 arm64: dts: mt8183: kukui-jacuzzi: Drop bogus anx7625 panel_flag property
aef30bad7a04 arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile
c8d764a0bbc6 dt-bindings: soc: mediatek: pwrap: Modify compatible for MT8188
1b35e3cf8066 dt-bindings: arm: mediatek: Add mt8188 pericfg compatible
7e4914880550 dt-bindings: arm: Add compatible for MediaTek MT8188
c4c85ca7297e arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes
e7300ae6b913 dt-bindings: display: mediatek: dsi: add compatible for MediaTek MT8195
cebba0dd1a01 arm64: dts: mediatek: mt6358: Merge ldo_vcn33_* regulators
8ac8be12ac45 dt-bindings: arm: mediatek: convert audsys and mt2701-afe-pcm to yaml
275042f3fe7b arm64: dts: mediatek: mt8195: add MDP3 nodes
aba1f17e7acc arm64: dts: mediatek: mt8195: revise VDOSYS RDMA node name
7032d5f144c2 arm64: dts: mediatek: mt8183: correct MDP3 DMA-related nodes
22bae315e031 dt-bindings: display: mediatek: padding: add compatible for MT8195
751c1a1076cb dt-bindings: display: mediatek: split: add compatible for MT8195
e2f195c9941b dt-bindings: display: mediatek: ovl: add compatible for MT8195
98aa994aefee dt-bindings: display: mediatek: merge: add compatible for MT8195
6f5d6cbaa3f9 dt-bindings: display: mediatek: color: add compatible for MT8195
ef86984ae659 dt-bindings: display: mediatek: aal: add compatible for MT8195
8f6efe19695a dt-bindings: media: mediatek: mdp3: add component TDSHP for MT8195
f3a2d9b01651 dt-bindings: media: mediatek: mdp3: add component TCC for MT8195
9952a02bb5ee dt-bindings: media: mediatek: mdp3: add component STITCH for MT8195
6c49acbc4134 dt-bindings: media: mediatek: mdp3: add component HDR for MT8195
d6fdbfb3b4ad dt-bindings: media: mediatek: mdp3: add component FG for MT8195
a7d6e829425b dt-bindings: media: mediatek: mdp3: add compatible for MT8195 WROT
7db0370c2d66 dt-bindings: media: mediatek: mdp3: add compatible for MT8195 RSZ
5620ceb8b6ca dt-bindings: media: mediatek: mdp3: add config for MT8195 RDMA
8f056e0ef45c dt-bindings: media: mediatek: mdp3: merge the indentical RDMA under display
c2d8940ef6fd dt-bindings: media: mediatek: mdp3: correct RDMA and WROT node with generic names
4347ab16a815 media: dt-bindings: mediatek: Add phandle to mediatek,scp on MDP3 RDMA
e14664bd10f6 arm64: dts: mediatek: mt8195-cherry: Assign sram supply to MFG1 pd
0561502a0693 arm64: dts: mediatek: mt8195-cherry: Add MFG0 domain supply
08b52bb4b076 dt-bindings: reset: mt8188: Add VDOSYS reset control bits
10fbcb9df4e2 dt-bindings: arm: mediatek: Add compatible for MT8188
88c996595db3 dt-bindings: display: mediatek: padding: Add MT8188
ca5643fef42b dt-bindings: display: mediatek: merge: Add compatible for MT8188
ae3b78a94c61 dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188
744464b66c7e dt-bindings: display: mediatek: ethdr: Add compatible for MT8188
01b1569a2d88 dt-bindings: thermal: convert Mediatek Thermal to the json-schema
90d08ec14e3c arm64: dts: mt8183: Add jacuzzi pico/pico6 board
5df3f176b5bf dt-bindings: arm64: mediatek: Add mt8183-kukui-jacuzzi-pico
281ab3bf124c arm64: dts: mt8183: Add jacuzzi makomo board
52cfc0fd5dd9 dt-bindings: arm64: mediatek: Add mt8183-kukui-jacuzzi-makomo
19dd875d8e0a arm64: dts: mt8183: Add kukui katsu board
b8dd2f8c3e1c dt-bindings: arm64: mediatek: Add mt8183-kukui-katsu
9a6a916f0bc6 arm64: dts: mediatek: Move MT6358 PMIC interrupts to MT8183 boards
3f27ea46dc3d arm64: dts: mediatek: Use interrupts-extended where possible
ad0c69fd2fa3 arm64: dts: mediatek: mt8173: Use interrupts-extended where possible
c82e8139aeaa arm64: dts: mediatek: mt8183: Use interrupts-extended where possible
d8a485fe96f7 dt-bindings: soc: mediatek: add mt8186 and mt8195 svs dt-bindings
e66d619c0c3a dt-bindings: arm: mediatek: mmsys: Add VPPSYS compatible for MT8188
5e6b938fc74f arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones
e90ef555e054 arm64: dts: mediatek: mt8183: Add decoder
0f0ccec6cc8d arm64: dts: mediatek: mt8173: Drop VDEC_SYS reg from decoder
b6aed11d9548 arm64: dts: mediatek: cherry: Add platform thermal configuration
86760b83d52b dt-bindings: display: simple: Add AUO G156HAN04.0 LVDS display
a9ddc30ef584 dt-bindings: display: panel: Add Ilitek ili9805 panel controller
defac25462fb dt-bindings: display: st7701: Add Anbernic RG-ARC panel
336bc0e68db2 dt-bindings: display: panel: add Fascontek FS035VG158 panel
955ce81826fb dt-bindings: vendor-prefixes: Add fascontek
752a79b7aaef dt-bindings: display: panel: Clean up leadtek,ltk035c5444t properties
770aea203c16 Merge 6.7-rc5 into tty-next
34ef5edc5b88 Merge 6.7-rc5 into usb-next
621073890e71 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
bf94b2d5359e arm64: dts: exynos: add minimal support for exynosautov920 sadk board
e9fd8cf1d2d8 arm64: dts: exynos: add initial support for exynosautov920 SoC
d0863d30608a dt-bindings: pinctrl: samsung: correct ExynosAutov920 wake-up compatibles
9bdf0db8ae4b dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
5b54324e6d5b dt-bindings: dma: Drop undocumented examples
e2fd1a08fd82 Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next
a04c2351b389 dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
9b3c118b3d19 dt-bindings: clock: Add Google gs101 clock management unit bindings
d97b5e938286 dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
6a5a439c0701 dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible
10422d721886 dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible
3a5cb767f670 media: dt-bindings: media: rkisp1: Fix the port description for the parallel interface
1da803cb7af8 arm64: dts: qcom: qcm6490-fairphone-fp5: Enable WiFi
8da528961e4e arm64: dts: qcom: qcm6490-fairphone-fp5: Enable various remoteprocs
e6fa65e6d152 arm64: dts: qcom: sc7280: Add CDSP node
fc9753f721c5 arm64: dts: qcom: sc7280: Add ADSP node
c8ee1d58df76 arm64: dts: qcom: sc7280: Use WPSS PAS instead of PIL
52f7c413fda4 arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS
4df3a7b5d504 arm64: dts: qcom: msm8953: Set initial address for memory
423afe7e3dcb ARM: dts: qcom: msm8226: Add GPU
bba409f9c339 ARM: dts: qcom: Disable pm8941 & pm8226 smbb charger by default
7e9db953a623 arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board
4e3613f89c7f arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc
d8bfc2581200 dt-bindings: input: gpio-mouse: Convert to json-schema
2691fb7a0b13 dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
2dc455b73efa ARM: dts: samsung: exynos4210-i9100: Add accelerometer node
0fab2792a476 ARM: dts: samsung: exynos4210-i9100: Add node for touch keys
7ea4a30a8fd6 ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12
4cee9945012b ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
e76f84dfaedb arm64: dts: qcom: sm8650: Add DisplayPort device nodes
2cfe9148e611 arm64: dts: qcom: pm8550: drop PWM address/size cells
49e3d2a63a49 dt-bindings: display: mediatek: padding: Add MT8188
8c1a5538e89b dt-bindings: display: mediatek: merge: Add compatible for MT8188
29025812d6c3 dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
3e60d5b58b7d dt-bindings: gpu: samsung-scaler: constrain iommus and power-domains
1d6aee346b02 dt-bindings: gpu: samsung-g2d: constrain iommus and power-domains
d4a84a84e922 dt-bindings: gpu: samsung: constrain clocks in top-level properties
1e0b14dc8237 dt-bindings: gpu: samsung: re-order entries to match coding convention
ba50ff463c59 dt-bindings: gpu: samsung-rotator: drop redundant quotes
1a3c1bf5b141 dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188
0a16c7e2c414 dt-bindings: display: mediatek: ethdr: Add compatible for MT8188
925f69a6cc7d dt-bindings: serial: qcom,msm-uartdm: Vote for shared resources
44f4478aa927 dt-bindings: serial: snps-dw-apb-uart: include rs485 schema
fad4b52a0fdb arm64: dts: hisilicon: hikey970-pmic: clean up SPMI node
051c12eb5d46 arm64: dts: hisilicon: hikey970-pmic: fix regulator cells properties
e567127bd619 dt-bindings: hisilicon: Merge hi3620-clock into hisilicon,sysctrl binding
4b823f7042ef arm64: dts: qcom: x1e80100: Add Compute Reference Device
f51679f0f817 arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts
ca121fc146b2 dt-bindings: arm: qcom: Document X1E80100 SoC and boards
c53c3b8c12a4 dt-bindings: arm: cpus: Add qcom,oryon compatible
aa432318faa9 Merge branch 'icc-x1e80100' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8
9eba2f2fb214 Merge branch '20231205061002.30759-4-quic_sibis@quicinc.com' into arm64-for-6.8
f213e67c84b7 Merge branch '20231205061002.30759-4-quic_sibis@quicinc.com' into clk-for-6.8
ecc521e21905 dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100
079af735ef3c dt-bindings: clock: qcom: Add X1E80100 GCC clocks
8f4495322f78 arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers
02b73ff63440 arm64: dts: qcom: sm8650: add Soundwire controllers
e6679602ac09 arm64: dts: qcom: sm8650: add ADSP audio codec macros
5c0a5d9640c3 arm64: dts: qcom: sm8650: add LPASS LPI pin controller
7f6211cc8e63 arm64: dts: qcom: sm8650: add ADSP GPR
b72a9e98977b arm64: dts: qcom: sm8650-qrd: enable IPA
13bdc41575ab arm64: dts: qcom: sm8650: add IPA information
0fd767d395a1 arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes
d68c8f7f237a arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes
900a28b939d2 arm64: dts: qcom: sm8650: add interconnect dependent device nodes
ff01973261d0 arm64: dts: qcom: sm8650: add initial SM8650 QRD dts
185ce15a620b arm64: dts: qcom: sm8650: add initial SM8650 MTP dts
487b5dde17e2 arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable
61ff00c8e1de arm64: dts: qcom: add initial SM8650 dtsi
7266e49a2f3e dt-bindings: arm: qcom: document SM8650 and the reference boards
34a104c65fa9 Merge branch 'icc-sm8650' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8
dc9c79dc36cc Merge branch '20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into arm64-for-6.8
482bf7559678 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
89cdcbe73e3a dt-bindings: display: msm: dp-controller: document SM8650 compatible
6457d6362b66 docs: dt-bindings: add DTS Coding Style document
17bd76b0dcba ARM: dts: rockchip: add gpio alias for gpio dt nodes
1e3bf6cdb555 dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example
ebf62e0e08ff dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding
ff778a37f71a dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference
60bfc8c9aef9 dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
ae3daad140cd arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree
3ab4a6461f9d dt-bindings: arm: qcom: Add Xiaomi Pad 6 (xiaomi-pipa)
a4229e4b1bf7 arm64: dts: qcom: sm8550-qrd: enable IPA
0b02bd1a7f8b arm64: dts: qcom: sm8550: add IPA information
1d704f347212 dt-bindings: firmware: qcom,scm: document SCM on X1E80100 SoCs
a07e2c07074c dt-bindings: arm: qcom-soc: extend pattern matching for X1E80100 SoC
190053cb1ce8 arm64: dts: qcom: minor whitespace cleanup around '='
e5d9eb69d255 ARM: dts: qcom: minor whitespace cleanup around '='
a12829c0d5ea arm64: dts: qcom: ipq8074: Add QUP4 SPI node
81c5f29af493 arm64: dts: qcom: qdu1000: Add ECPRI clock controller
7f8d2a160503 Merge branch '20231123064735.2979802-2-quic_imrashai@quicinc.com' into clk-for-6.8
a7b1e49f140b dt-bindings: clock: qcom: Add ECPRICC clocks for QDU1000 and QRU1000
0d8365b85a68 ARM: dts: qcom: sdx55: fix USB wakeup interrupt types
4e5dc5d2a1e5 arm64: dts: qcom: sm8550: fix USB wakeup interrupt types
b0dd9226dd63 arm64: dts: qcom: sm8150: fix USB wakeup interrupt types
301d240b276b arm64: dts: qcom: sm6375: fix USB wakeup interrupt types
bcfa8e3ed274 arm64: dts: qcom: sdm845: fix USB wakeup interrupt types
20a6fe5d28b2 arm64: dts: qcom: sdm670: fix USB wakeup interrupt types
d2c7cfd6cfc3 arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types
6f29d799b7cf arm64: dts: qcom: sc7280: fix usb_2 wakeup interrupt types
ca84d4480b44 arm64: dts: qcom: sc7280: fix usb_1 wakeup interrupt types
096085135fda arm64: dts: qcom: sc7180: fix USB wakeup interrupt types
6c1f003cc9a1 arm64: dts: qcom: sa8775p: fix USB wakeup interrupt types
45bd09d633c8 arm64: dts: qcom: msm8916-longcheer-l8150: Add battery and charger
195857e6f299 arm64: dts: qcom: pm8916: Add BMS and charger
6caacf1f1bd3 arm64: dts: qcom: sc7280: Add 0xac Adreno speed bin
3ddcb3a31e24 arm64: dts: qcom: sc7280: Mark Adreno SMMU as DMA coherent
b8bf84b9efc0 arm64: dts: qcom: sc7280: Fix up GPU SIDs
0830942e59a4 arm64: dts: qcom: sc7280: Add ZAP shader support
6a2b85d201c9 dt-bindings: arm: qcom-soc: extend pattern for matching existing SoCs
ddd782c9e1e9 dt-bindings: cache: qcom,llcc: Add X1E80100 compatible
573141bcc2f7 arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support
93789523f679 arm64: dts: qcom: Add USB3 and PHY support on SDX75
ddc8552a97e0 arm64: dts: qcom: Add interconnect nodes for SDX75
2f6480d75792 arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
22ab1e4b96e5 arm64: dts: qcom: pm8350k: Remove hanging whitespace
648dd7cb906d arm64: dts: qcom: sm8350: Fix DMA0 address
aa5e755d7246 dt-bindings: iio: adc: qcom: Add Qualcomm smb139x
aee24a669374 arm64: dts: qcom: sc8180x: align APSS with bindings
c51b52a3c7aa arm64: dts: qcom: sm6375-pdx225: add fixed touchscreen AVDD regulator
714c2d01cb79 arm64: dts: qcom: sm6125: add interrupts to DWC3 USB controller
869ed2bf0b06 arm64: dts: qcom: sm6115: align mem timer size cells with bindings
5b01a3bc4e38 arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs
abcbd3630645 arm64: dts: qcom: sc8180x-primus: use 'gpios' suffix for PCI GPIOs
5281b1e2c756 arm64: dts: qcom: sc8180x-flex-5g: use 'gpios' suffix for PCI GPIOs
dbf927ecfde3 arm64: dts: qcom: sdm845: correct Soundwire node name
27d49e38f5d4 arm64: dts: qcom: sdm845-db845c: correct LED panic indicator
85591f38ba27 arm64: dts: qcom: qrb5165-rb5: correct LED panic indicator
65b61add6d70 arm64: dts: qcom: sm8250: Add wakeup-source to usb_1 and usb_2
343c9084fd53 arm64: dts: qcom: sdm850-lenovo-yoga: Add wakeup-sources
eb9d72ac20a4 arm64: dts: qcom: sa8775p-ride: enable pmm8654au_0_pon_resin
e4828a6315b4 arm64: dts: qcom: sm8350: move DPU opp-table to its node
cfa2fb4b7f5b arm64: dts: qcom: sc8280xp-x13s: drop sound-dai-cells from eDisplayPort
927e9926b48f arm64: dts: qcom: sc8180x-primus: drop sound-dai-cells from eDisplayPort
ca8a02834a8f arm64: dts: qcom: sm8250: correct Soundwire node name
682a341c0cdc arm64: dts: qcom: sc8280xp: correct Soundwire node name
13f2dbc0a9cb arm64: dts: qcom: qdu1000-idp: drop unused LLCC multi-ch-bit-off
6cda67d14000 arm64: dts: qcom: qdu1000: correct LLCC reg entries
208a56e344a2 arm64: dts: qcom: sm8450: fix soundwire controllers node name
c7bee631d3e9 arm64: dts: qcom: sm8550: fix soundwire controllers node name
255ca7c95406 Merge branch '20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into clk-for-6.8
52721c372031 dt-bindings: clock: qcom: Document the SM8650 RPMH Clock Controller
a8430c36d8bc dt-bindings: clock: qcom: document the SM8650 GPU Clock Controller
e39f08bf115a dt-bindings: clock: qcom: document the SM8650 Display Clock Controller
076aa9fc05f3 dt-bindings: clock: qcom: document the SM8650 General Clock Controller
abeff2c9f476 dt-bindings: clock: qcom: document the SM8650 TCSR Clock Controller
3714369ceebb dt-bindings: cache: qcom,llcc: Document the SM8650 Last Level Cache Controller
cb0f1e272d52 dt-bindings: clock: qcom,gcc-msm8939: Add CSI2 related clocks
7ee4127b7a3f arm64: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
d380ef670205 Merge branch '20231026105345.3376-3-bryan.odonoghue@linaro.org' into arm64-for-6.8
30a292de3f9a Merge branch '20231026105345.3376-3-bryan.odonoghue@linaro.org' into clk-for-6.8
f007e023cbd5 dt-bindings: clock: Add SC8280XP CAMCC
aec8967c6dce dt-bindings: clock: Use gcc.yaml for common clock properties
7c1eb93bd0d3 dt-bindings: clock: qcom,gcc-ipq6018: split to separate schema
b6364ec8f82d dt-bindings: arm: qcom,ids: Add SoC ID for SM8650
3f482ad7991e arm64: dts: qcom: sm8550: Enable download mode register write
fe077e894545 arm64: dts: qcom: sm8350: Add TCSR halt register space
956699ec82d4 arm64: dts: qcom: sm8250: Add TCSR halt register space
e0bd046de230 arm64: dts: qcom: ipq5018: add few more reserved memory regions
c38c43d3b995 arm64: dts: qcom: ipq5332: add missing properties to the GPIO LED node
0390c1ee5e11 arm64: dts: qcom: ipq9574: enable GPIO based LED
2f9b91c0cf6d arm64: dts: qcom: qrb2210-rb1: use USB host mode
2196010939c0 dt-bindings: firmware: qcom,scm: document SM8650 SCM Firmware Interface
ae8a176c474a dt-bindings: soc: qcom: pmic-glink: document SM8650 compatible
c3cb68af1e5d dt-bindings: soc: qcom,aoss-qmp: document the SM8560 Always-On Subsystem side channel
a6ea4114f911 dt-bindings: mmc: mtk-sd: add tuning steps related property
30e4bc60ac6d dt-bindings: mfd: ti,am3359-tscadc: Allow dmas property to be optional
5c51588d48df dt-bindings: mfd: qcom,spmi-pmic: Add pm8916 vm-bms and lbc
a03962f53dbd dt-bindings: mfd: qcom-spmi-pmic: Document PM8937 PMIC
81a2c830f173 dt-bindings: mfd: qcom,tcsr: Add compatible for sm8250/sm8350
fe50e0fb05fc dt-bindings: mfd: ams,as3711: Convert to json-schema
197c27b6cfaa arm64: dts: fsd: add specific compatibles for Tesla FSD
395fa67b6b72 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
5927c83d20c8 dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
78e4ed4670d7 dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
c168df69f5a1 dt-bindings: serial: samsung: add specific compatible for Tesla FSD
6dedf66f0e8b dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
457e5d03f14d dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
4b7a14529669 dt-bindings: mmc: renesas,sdhi: Document RZ/Five SoC
a135e0045af7 dt-bindings: mmc: arasan,sdci: Add gate property for Xilinx platforms
d0ed6c92c98e dt-bindings: mmc: sdhci-of-dwcmhsc: Add T-Head TH1520 support
f7a9df14027b dt-bindings: net: microchip,ksz: document microchip,rmii-clk-internal
b81aa4a5992d media: dt-bindings: mediatek: Add phandle to mediatek,scp on MDP3 RDMA
b80f939c4051 dt-bindings: iio/adc: qcom,spmi-vadc: clean up examples
44c4f2c40551 dt-bindings: iio/adc: qcom,spmi-vadc: fix example node names
c57fab0a68f9 dt-bindings: iio/adc: qcom,spmi-rradc: clean up example
f330b6a06a10 dt-bindings: iio/adc: qcom,spmi-iadc: clean up example
d089bb38e3f6 dt-bindings: iio/adc: qcom,spmi-iadc: fix example node name
d92310a0b805 dt-bindings: iio/adc: qcom,spmi-iadc: fix reg description
6afb70912c0a Merge tag 'renesas-dts-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
77be7b2ec3d6 arm64: dts: ti: Add verdin am62 mallow board
5fe3785a98a1 dt-bindings: arm: ti: Add verdin am62 mallow board
7bf01a4e3239 ASoC: dt-bindings: fsl,xcvr: Adjust the number of interrupts
568ee5fdf77d dt-bindings: interconnect: Add Qualcomm SM6115 NoC
7549b7adec53 arm64: dts: ti: verdin-am62: Improve spi1 chip-select pinctrl
0b160138fdcc arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Remove HDMI Reset Line Name
42aed107725d arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support
766ac2241c85 arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Lower I2C1 frequency
bcf7dd5b8b09 arm64: dts: ti: phycore-am64: Add R5F DMA Region and Mailboxes
e1dfb1eb87a4 riscv: dts: microchip: add the mpfs' system controller qspi & associated flash
59d2f723c14b dt-bindings: soc: microchip: add a property for system controller flash
4b452a4cfa9e ARM: dts: imx23/28: Remove undocumented "fsl,clkctrl"
485e1601cd25 ARM: dts: bcm2711: Add BCM2711 xHCI support
439353e944b0 dt-bindings: usb: xhci: Add support for BCM2711
4b95e8b40522 ARM: dts: imx28-lwe: Pass device_type to the memory node
ea0431aa1757 ARM: dts: imx23/28: Remove unneeded "fsl,mxs-gpio"
e63738dd96c8 ARM: dts: imx28-tx28: Pass #sound-dai-cells
fc88878c01c0 arm64: dts: imx8mq-phanbell: make dts use gpio-fan matrix instead of array
e21fe3809cd3 arm64: dts: freescale: verdin-imx8mp: add support to mallow board
a75cfdc4a966 arm64: dts: freescale: verdin-imx8mm: add support to mallow board
3b7bee60295f arm64: dts: imx8mm-venice-gw7: Adjust PCI Ethernet nodes
5241ecb06203 dt-bindings: arm: fsl: add verdin imx8mp mallow board
b80ecc880136 dt-bindings: arm: fsl: add verdin imx8mm mallow board
ad1ae2498610 arm64: dts: imx8mm: Slow default video_pll1 clock rate
5aa830cec5a3 arm64: dts: imx8mm: Remove video_pll1 clock rate from clk node
110274d03548 arm64: dts: imx8mm: Simplify mipi_dsi clocks
99d898689e0b ARM: dts: imx7s: Add on-chip memory
29d17af3b09b ARM: dts: imx7: add MIPI-DSI support
d9c25edf04ae scsi: ufs: dt-bindings: Add msi-parent for UFS MCQ
dba1025f17d0 ARM: dts: nxp: Fix some common switch mistakes
4ea7b578957d arm64: dts: freescale: minor whitespace cleanup around '='
dbb52d93894b arm64: dts: imx8dxl-ss-ddr: change ddr_pmu0 compatible
941d70d2ae55 arm64: dts: tqma8mpql: Remove invalid/unused property
ec00a410133c arm64: dts: imx8-ss-audio: Remove unexistent'shared-interrupt'
604139ed79f6 arm64: dts: imx93: Remove unexistent 'shared-interrupt'
7a445842e287 arm64: dts: imx8qxp-mek: Fix gpio-sbu-mux compatible
0c2122b767be arm64: dts: imx8mp-debix-model-a: Use phy-mode
2e9827c5e054 arm64: dts: imx8mm-nitrogen-r2: Fix I2C mux subnode name
d1e22a0dfb43 arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names order
6299d7ae35e5 arm64: dts: imx8mm-emcon-avari: Fix gpio-cells
9de3f32f3c7d arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names
6905c613057b arm64: dts: freescale: Add SKOV IMX8MP CPU revB board
b20a05f3b464 arm64: dts: imx8mn-var-som-symphony: add vcc supply for PCA9534
a5a6af3c0bdd arm64: dts: freescale: introduce rve-gateway board
83600000758e arm64: dts: freescale: debix-som-a-bmb-08: Add CSI Power Regulators
b5e632bcd082 arm64: dts: imx8-apalis: add can power-up delay on ixora board
9804057f0f96 arm64: dts: imx8mn-var-som: add fixed 3.3V regulator for EEPROM
e3c93255cfdb arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodes
8357f0b7ae64 arm64: dts: imx8mp: Disable dsp reserved memory by default
3b2b78d127df arm64: dts: imx8mp: Add NPU Node
b13969aeeefc arm64: dts: freescale: debix-som: Add heartbeat LED
5c6068a3aecc arm64: dts: freescale: Add dual-channel LVDS overlay for TQMa8MPxL
37dbfb74c066 arm64: dts: imx8mp-venice-gw74xx: remove unecessary propreties in tpm node
12f50b18b3a5 ARM: dts: nxp: minor whitespace cleanup around '='
7e4a296e0073 ARM: dts: imx7d-colibri-emmc: Add usdhc aliases
aac483d2d190 ARM: dts: imx6qdl-colibri: Add usdhc aliases
534d21c04c41 ARM: dts: imx6qdl-apalis: Add usdhc aliases
4105f51d0c63 ARM: dts: nxp: imx7d-pico: add cpu-supply nodes
4a5f36c1120b dt-bindings: arm: Add compatible for SKOV i.MX8MP RevB board
7efe4371f644 dt-bindings: arm: fsl: add RVE gateway board
3c86e357feb0 dt-bindings: vendor-prefixes: add rve
04660a3dbd9f ARM: dts: broadcom: Add BCM63138's high speed UART
2e36ee7e60cd arm64: dts: ti: k3-am62x: Add overlay for IMX219
8478bfdedc00 arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals
a361c10e44cc arm64: dts: ti: k3-am62x: Add overlays for OV5640
820399f7bf0f arm64: dts: ti: k3-am62x-sk: Enable camera peripherals
4de948eeb982 arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640
8d6be01e5e7c arm64: dts: ti: k3-am62a-main: Enable CSI2-RX
d52951f9d78a arm64: dts: ti: k3-am62-main: Enable CSI2-RX
4d667e27b3fd arm64: dts: ti: k3-am65: Add AM652 dtsi file
3d2161ed0c2b dt-bindings: perf: fsl-imx-ddr: Add i.MX8DXL compatible
189fe310f16e dt-bindings: clock: support i.MX93 ANATOP clock module
b44d3f817227 ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)
b654e96c546e dt-bindings: display: simple: add Evervision VGG644804 panel
05a02c1a58e1 dt-bindings: ili9881c: Add Ampire AM8001280G LCD panel
96be0427a528 ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128
18c0b8b47af4 ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128
0191774d40bb ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
4b6344ed1b32 ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub
3cbab293b053 dt-bindings: arm: rockchip: Add Sonoff iHost
afacdf8be4db ARM: dts: rockchip: Add rv1109 SoC
ad1e5ad721a5 ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126
fc0ef88ee0a1 ARM: dts: rockchip: Add i2c2 node to rv1126
bf739d2f67ae ARM: dts: rockchip: Serial aliases for rv1126
049605e5080d ARM: dts: rockchip: Add alternate UART pins to rv1126
59e8d345382e ARM: dts: rockchip: Enable GPU for XPI-3128
464bddcf0726 ARM: dts: rockchip: Add GPU node for RK3128
8af06043d850 ARM: dts: rockchip: Add power-controller for RK3128
8f65bb97112e dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel
ed2d8407a82d dt-bindings: display: Document Himax HX8394 panel rotation
5319f5062c10 dt-bindings: display: simple: Add boe,bp101wx1-100 panel
db09be0ff97b ARM: dts: imx6q-apalis: add can power-up delay on ixora board
31fdbd1cd6c6 dt-bindings: display: msm: document the SM8650 Mobile Display Subsystem
52e16372d1c6 dt-bindings: display: msm: document the SM8650 DPU
258f55b8a6c7 dt-bindings: display: msm-dsi-controller-main: document the SM8650 DSI Controller
f06034e33173 dt-bindings: display: msm-dsi-phy-7nm: document the SM8650 DSI PHY
e7cafbdafccf dt-bindings: display: msm: Add SDM670 MDSS
58504ed9c645 dt-bindings: display/msm: sdm845-dpu: Describe SDM670
d8b80f6fd0c5 dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible
0c71ce621111 arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name
0895f560a171 arm64: dts: ti: k3-am62a7-sk: Add interrupt support for IO Expander
696f6e8d6176 arm64: dts: ti: k3-am625-verdin: Enable Verdin UART2
145b9a5ffb00 arm64: dts: ti: k3-am62-main: Add gpio-ranges properties
0d95f5e22dde arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level
8ccabbb5322f arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level
4b9d0ee63df8 arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node
b64af72b8e7b arm64: dts: ti: k3-j784s4: Add chipid node to wkup_conf bus
a70ca898f980 arm64: dts: ti: k3-j721s2: Add chipid node to wkup_conf bus
638e0242808a arm64: dts: ti: k3-j721e: Add chipid node to wkup_conf bus
0b0e18c3dce2 arm64: dts: ti: k3-j7200: Add chipid node to wkup_conf bus
16b21e3cf2ea arm64: dts: ti: k3-am65: Add chipid node to wkup_conf bus
ba6541592794 dt-bindings: iio: light: isl76682: Document ISL76682
3678e1e114f2 dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: add X1E80100 LPASS LPI
4854bb4b43e2 dt-bindings: pinctrl: pinctrl-single: add ti,j7200-padconf compatible
062b01e5c736 dt-bindings: iio: light: add support for Vishay VEML6075
3f170ed89d6f dt-bindings: usb: tps6598x: add reset-gpios property
69a424bfd498 dt-bindings: iio/adc: ti,palmas-gpadc: Drop incomplete example
5cf3c6e7327b dt-bindings: adi,ad5791: Add support for controlling RBUF
7a11d1470ed1 dt-bindings: display: bridge: lt8912b: Add power supplies
562bb8392ec6 spi: spl022: fix sleeping in interrupt context
83c535a1ec6b dt-bindings: iio: honeywell,mprls0025pa: drop ref from pressure properties
7cb202a1a899 dt-bindings: media: add bindings for stm32 dcmipp
fce776c784a0 dt-bindings: media: Add bindings for THine THP7312 ISP
23c5bf41000e dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings
e6429afd32f1 dt-bindings: vendor-prefixes: Add prefix for GalaxyCore Inc.
d1287a3d111f dt-bindings: gpio: rockchip: add a pattern for gpio hogs
e08aefe3ce14 Merge tag 'qcom-dts-for-6.7-2' into arm32-for-6.8
66862cc676b1 ARM: dts: qcom: Add support for HTC One Mini 2
ac27d4b5eaa6 Merge tag 'v6.7-rc4' into media_stage
8a745825682b arm64: dts: qcom: sm6350: Make watchdog bark interrupt edge triggered
4de273b8d5cf arm64: dts: qcom: sc8280xp: Make watchdog bark interrupt edge triggered
94d4ed6b0efb arm64: dts: qcom: sa8775p: Make watchdog bark interrupt edge triggered
9e80723d8b4f arm64: dts: qcom: sm8250: Make watchdog bark interrupt edge triggered
ef5fa5d97caa arm64: dts: qcom: sm8150: Make watchdog bark interrupt edge triggered
3879bc4c1c04 arm64: dts: qcom: sdm845: Make watchdog bark interrupt edge triggered
8e7e69e2041a arm64: dts: qcom: sc7280: Make watchdog bark interrupt edge triggered
6584d8b4799e arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered
04f80707bc19 arm64: dts: qcom: sc8180x: drop duplicated PCI iommus property
04597b9d0b6f dt-bindings: arm: qcom: Add HTC One Mini 2
7ff927ff9139 dt-bindings: vendor-prefixes: document HTC Corporation
fa70da0426ea arm64: dts: qcom: sm8550: correct TX Soundwire clock
ed7e07a029d6 arm64: dts: qcom: sm8450: correct TX Soundwire clock
541ded0776d2 arm64: dts: qcom: sc8180x-primus: Fix HALL_INT polarity
39c752cf5603 arm64: dts: qcom: sc8280xp-crd: fix eDP phy compatible
e5319a1187df arm64: dts: qcom: sdm632-fairphone-fp3: Enable LPASS
daf6cf6a007f arm64: dts: qcom: msm8916-acer-a1-724: Add notification LED
2a186fbc9370 arm64: dts: qcom: ipq6018: use CPUFreq NVMEM
91d98fe1640a arm64: dts: qcom: msm8939-huawei-kiwi: Add initial device tree
6718a893d987 dt-bindings: arm: qcom: Add Huawei Honor 5X / GR5 (2016)
f36c60304a90 arm64: dts: qcom: msm8953: Use non-deprecated qcom,domain in LPASS
fa91149122fc arm64: dts: qcom: qrb2210-rb1: add wifi variant property
9862c76b6484 arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller
90510995b456 arm64: dts: qcom: qrb2210-rb1: Set up HDMI
f168a1f5fd2a arm64: dts: qcom: qcm2290: Hook up interconnects
a66c95bb5052 arm64: dts: qcom: qcm2290: Add display nodes
1b3d99e8ad9d arm64: dts: qcom: sc7280: Add the missing MDSS icc path
463b9cc7faa3 arm64: dts: qcom: sc7180: Add the missing MDSS icc path
a2b32f52593b arm64: dts: qcom: sc8280xp: Add QMP handle to RPMh stats
0541077473ea dt-bindings: soc: qcom: stats: Add QMP handle
46fd383def7f arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node and enable usb otg
45ca7aacee21 arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos
9dee357f1ff5 arm64: dts: qcom: msm8939-longcheer-l9100: Add proximity-near-level
d6b8367dbb65 arm64: dts: qcom: qrb4210-rb2: Enable bluetooth
9e8fcdbc4d75 arm64: dts: qcom: sm6115: Add UART3
e88a0c4a9117 arm64: dts: qcom: sdm632-fairphone-fp3: Enable WiFi/Bluetooth
a808b8c6d7f4 dt-bindings: arm: qcom: Fix html link
004244e4cbd5 arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts
3f55e77ebc86 arm64: dts: qcom: Add base qcm6490 idp board dts
9e08836a864f dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board
c538a9224903 arm64: dts: qcom: sm4450-qrd: mark QRD4450 reserved gpios
34764956c2e4 arm64: dts: qcom: sm4450-qrd: add QRD4450 uart support
b5fe030e21e0 arm64: dts: qcom: sm4450: add uart console support
76478ce29df3 arm64: dts: qcom: sm4450: Add RPMH and Global clock
52ea11ee57e9 arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node
d42f9497ccad arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC
9b98d0a1718e dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks
2417b30e3609 arm64: dts: qcom: msm8953: add SPI interfaces
66dd2b49a0b3 arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals
0b651704285a arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMK7325 thermals
8630d7baedf5 arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals
959371b1b650 iio: adc: Add PM7325 PMIC7 ADC bindings
b1e6472aae24 arm64: dts: qcom: sm8250: Add OPP table support to UFSHC
6aeff20d0bd6 arm64: dts: qcom: sdm845: Add OPP table support to UFSHC
e8d1d500097e ARM: dts: qcom: msm8974: Add watchdog node
615027dbbe1d dt-bindings: arm: qcom: drop the IPQ board types
ebb3e763ee5b arm64: dts: qcom: ipq5018: enable the CPUFreq support
3ca74e9810cf dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible
dcbafe8963f4 ARM: dts: qcom: sdx65: correct SPMI node name
98b030d58c93 ARM: dts: qcom: sdx65: add missing GCC clocks
07a16205d0e0 ARM: dts: qcom: sdx65: correct PCIe EP phy-names
fe48cd5331dc dt-bindings: display: msm: Add reg bus and rotator interconnects
8c1892c5f696 dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat
7cfd5769a991 dt-bindings: display/msm: qcom, sm8150-mdss: correct DSI PHY compatible
91abf991ed4a dt-bindings: display/msm: qcom, sm8250-mdss: add DisplayPort controller node
c203dee53e38 ARM: dts: rockchip: Enable gmac for XPI-3128
a31102a06882 ARM: dts: rockchip: Add gmac node for RK3128
d02bab784773 dt-bindings: gpu: mali-utgard: Add Rockchip RK3128 compatible
61b6b8e5340b dt-bindings: net: qcom,ipa: document SM8650 compatible
a0fa8df10233 Merge tag 'renesas-pinctrl-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
6c58c6977828 dt-bindings: gpio: modepin: Describe label property
7f00d1c96321 dt-bindings: display: ti: Add support for am62a7 dss
6bed64726635 arm64: dts: ti: k3-am68-sk-base-board: Add alias for MCU CPSW2G
f494c9948974 arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG2 devices
403938b5222f arm64: dts: ti: iot2050: Refactor the m.2 and minipcie power pin
45e3b6aa9185 arm64: dts: ti: iot2050: Definitions for runtime pinmuxing
b14c51a347fb arm64: dts: ti: iot2050: Drop unused ecap0 PWM
38f52ad2cea9 arm64: dts: ti: iot2050: Re-add aliases
a84e54a6c2a0 arm64: dts: ti: k3-am62x-sk-common: Mark mcu gpio and mcu_gpio_intr as reserved
0baa456c51ce arm64: dts: ti: k3-am62p5-sk: Mark mcu gpio and mcu_gpio_intr as reserved
131aadfec025 arm64: dts: ti: k3-am642-evm/sk: Mark mcu_gpio_intr as reserved
bbda0d8be30e arm64: dts: ti: k3-am64-main: Fix typo in epwm_tbclk node name
5e8876dba890 arm64: dts: ti: k3-am65-main: Fix DSS irq trigger type
fd78a91dedf3 arm64: dts: ti: k3-am62a-main: Fix GPIO pin count in DT nodes
05614d5b4f00 arm64: dts: ti: minor whitespace cleanup around '='
ca6dff24071e ARM: dts: omap4-embt2ws: Add Bluetooth
cff0864e2eea Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
2a2ae1545117 dt-bindings: input: gpio-keys: Allow optional dedicated wakeirq
aed93474ebc0 Merge patch series "Add Huashan Pi board support"
318917bad2c6 riscv: dts: sophgo: add Huashan Pi board device tree
8a2824be66df riscv: dts: sophgo: add initial CV1812H SoC device tree
3ff295494c04 riscv: dts: sophgo: cv18xx: Add gpio devices
dfcd3e4c81d9 riscv: dts: sophgo: Separate compatible specific for CV1800B soc
8c5d4ad957fa dt-bindings: riscv: Add SOPHGO Huashan Pi board compatibles
e393d2e6705e dt-bindings: timer: Add SOPHGO CV1812H clint
65cc6be0d442 dt-bindings: interrupt-controller: Add SOPHGO CV1812H plic
dce8266bb548 ARM: dts: omap: logicpd-torpedo: do not disguise GNSS device
0f0cee70a881 ARM: dts: omap4-embt2ws: enable 32K clock on WLAN
33dfdcf03832 ARM: dts: ti/omap: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
aa5a9a109405 dt-bindings: power: meson-g12a-power: document ISP power domain
a9f86a1f45b5 dt-bindings: marvell: Add Marvell MV88E6060 DSA schema
5024553a10f5 dt-bindings: marvell: Rewrite MV88E6xxx in schema
ad4c44e96eec dt-bindings: net: ethernet-switch: Accept special variants
17baedd697fb dt-bindings: net: mvusb: Fix up DSA example
9c7ccdf2dc30 dt-bindings: net: dsa: Require ports or ethernet-ports
8adbf64f3cdd dt-bindings: input: mediatek,pmic-keys: Drop incomplete example
cdc098b167e1 dt-bindings: input: sprd,sc27xx-vibrator: Drop incomplete example
0629a76a9d04 dt-bindings: correct white-spaces in examples
2f78b6dd5c42 dt-bindings: reset: hisilicon,hi3660-reset: Drop providers and consumers from example
f835598ebf60 dt-bindings: arm/calxeda: drop unneeded quotes
0d2567437a54 dt-bindings: fsl,dpaa2-console: drop unneeded quotes
352ed027a423 dt-bindings: interrupt-controller: qcom,pdc: document pdc on X1E80100
df641036bac4 dt-bindings: qcom,pdc: document the SM8650 Power Domain Controller
1e17b2ba4499 dt-bindings: interrupt-controller: Add SDX75 PDC compatible
c0aff4abb03a dt-bindings: reset: imx-src: Simplify compatible schema and drop unneeded quotes
df20c9f94014 dt-bindings: reset: qcom: drop unneeded quotes
1516b28c7069 dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/Five SoC
a80bc27a0fe8 dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller
0b8db84ecfc4 ASoC: Intel: Soundwire related board and match updates
303600aff1ef Merge v6.7-rc3 into drm-next
d03f6dca688d arm64: dts: rockchip: Use NCM6A-IO board for edgeble-neu6b
2dcf7dbe2812 dt-bindings: arm: rockchip: Update edgeble-neu6 bindings
b2a45d98f95b arm64: dts: rockchip: add USB3 host on rk3588s-orangepi-5
766aa3119c2f ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617
3ea15a23d9c7 ARM: dts: motorola-mapphone: Move handset devices to a common file
5127524f7e6f ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894
7e16bd264a3a dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets
7d420d843f98 ARM: dts: renesas: r9a06g032: Add missing space in compatible
0faa59be192f arm64: dts: renesas: r9a09g011: Add missing space in compatible
807cfe5cde5c dt-bindings: phy: add compatible for Mediatek MT8195
c52707b1bf77 dt-bindings: phy: amlogic,g12a-mipi-dphy-analog: drop unneeded reg property and example
34ec5dda2a01 dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: drop text about parent syscon and drop example
f738d7a9dfab dt-bindings: iommu: dart: Add t8103-usb4-dart compatible
2c963cfa7e8e ARM: dts: renesas: armadillo800eva: Add LCD panel
a35135dad31c dt-bindings: pinctrl: renesas: Drop unneeded quotes
d5212619f0a0 ARM: dts: renesas: r8a7740: Add LCDC nodes
048bdb67a0f6 arm64: dts: renesas: draak: Move HDMI bus properties to correct node
ab52a67f9767 arm64: dts: renesas: draak: Make HDMI the default video input
dab3ba03f28c Merge 6.7-rc3 into usb-next
ec6cd76a8793 arm64: dts: meson-axg: jethub-jxx add support for EEPROM
2da076589eac arm64: dts: amlogic: meson-axg: pinctrl node for NAND
cdc5df918882 arm64: dts: amlogic: minor whitespace cleanup around '='
a5dead35fc4b arm64: dts: Add watchdog node for Amlogic S4 SoCs
37c5369b4667 arm64: dts: Add watchdog node for Amlogic C3 SoCs
1d8b2a265b81 dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl
9556e1708419 ARM: dts: imx7s: Add DMA channels for CSPI peripherals
c1e5b6c6855f arm64: dts: imx8mp-venice-gw72xx: add TPM device
fc1ee0050ce4 arm64: dts: imx8mm-venice-gw72xx: add TPM device
5a125bf20bf1 arm64: dts: imx93: update anatop node
292fc296ecdd arm64: dts: imx93-11x11-evk: add 12 ms delay to make sure the VDD_SD power off
b81451d8d4d3 arm64: dts: imx93: change tuning start to get a large scan range for standard tuning
7ee940495143 arm64: dts: imx93-11x11-evk: set SION for cmd and data pad of USDHC
1b2037987962 arm64: dts: imx8mp: Describe M24C32-D write-lockable page in DH i.MX8MP DHCOM DT
94d5d7d36ba8 ARM: dts: imx6ul: mba6ulx: fix typo in comments
cbbed6036bfe ARM: dts: imx6qdl: mba6: fix typo in comments
e6c50d6fd99e arm64: dts: imx8mp-beacon-kit: Enable DSI to HDMI Bridge
3743277142d0 arm64: dts: imx8mm: Add CCM interrupts
663758efb819 arm64: dts: imx8mn: Add CCM interrupts
88774bafda13 arm64: dts: imx8mp: Add CCM interrupts
e4d9f4208c6c ARM: dts: imx7s: Add missing #thermal-sensor-cells
e4c3f040fee6 ARM: dts: imx7s: Fix nand-controller #size-cells
62a7c97c7c3f ARM: dts: imx7s: Fix lcdif compatible
9f3037b332bf ARM: dts: imx7d: Fix coresight funnel ports
d844fe5270b1 arm64: dts: freescale: add initial device tree for MBa93xxCA starter kit
ad161fbd54ca arm64: dts: freescale: tqma9352-mba93xxla: add 'chassis-type' property
8ec09c8f530c arm64: dts: imx93: Configure clock rate for audio PLL
9d7ba48273ea arm64: dts: imx93: Add audio device nodes
b1553710809c dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator
471ace1f09be dt-bindings: gpio: brcmstb: drop unneeded quotes
f8159413e6f1 ARM: dts: ti: keystone: minor whitespace cleanup around '='
381a63044158 dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids
c1ad3e49f07c dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids
c8fb56a76774 dt-bindings: dma: qcom,gpi: document the SM8650 GPI DMA Engine
8e868f10ea21 dt-bindings: dma: rz-dmac: Document RZ/Five SoC
e1504d7602c0 dt-bindings: net: qcom,ipa: add SM8550 compatible
f118e169a194 dt-bindings: dma: qcom: gpi: add compatible for X1E80100
11518ff4d13c dt-bindings: pinctrl: qcom: Add X1E80100 pinctrl
d3fe1008f0c8 ASoC: dt-bindings: correct white-spaces in examples
f9b11918132f dt-bindings: crypto: convert Inside Secure SafeXcel to the json-schema
52b8a84c5283 dt-bindings: dma: ti: k3-udma: Describe cfg register regions
9b2e4fa1e7f2 dt-bindings: dma: ti: k3-pktdma: Describe cfg register regions
6d91e2a3766b dt-bindings: dma: ti: k3-bcdma: Describe cfg register regions
ea1d92699d2a dt-bindings: dma: ti: k3-*: Add descriptions for register regions
7cf45f021d31 arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
dc0e2a7e69c2 arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
185cc3e40c9f dt-bindings: pinctrl: samsung: use Exynos7 fallbacks for newer wake-up controllers
54829849af39 Merge branch 'icc-x1e80100' into icc-next
8e2202f335a4 dt-bindings: interconnect: Add Qualcomm X1E80100 SoC
54f1f68e019b dt-bindings: interconnect: qcom-bwmon: document SM8650 BWMONs
4e7bf80ce812 dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM8650 SoC
615397ecb02b Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
e673bd9cbb13 dt-bindings: serial: fsl-linflexuart: change the maintainer email address
f79b00fe4cab dt-bindings: serial: renesas,sci: Document RZ/Five SoC
911d5cce2a4e Merge tag 'drm-misc-next-2023-11-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
ab1f350663b1 dt-bindings: power: rpmpd: Update part number to X1E80100
6fe8e1a8dc99 dt-bindings: backlight: mp3309c: Remove two required properties
cc4e22233cb5 dt-bindings: usb: qcom,dwc3: adjust number of interrupts on SM6125
9161184d7271 dt-bindings: net: renesas,ethertsn: Add Ethernet TSN
788d52642da4 Merge tag 'v6.7-rc2' into media_stage
d2975fb00035 dt-bindings: gpu: Add Imagination Technologies PowerVR/IMG GPU
59078ccb21d1 dt-bindings: usb: qcom,dwc3: document the SM8560 SuperSpeed DWC3 USB controller
627316c016dd dt-bindings: usb: renesas,usbhs: Document RZ/Five SoC
99b07ecabc3d dt-bindings: cache: sifive,ccache0: Add StarFive JH7100 compatible
0118ff6d8abd ASoC: dt-bindings: fsl,mqs: Convert format to json-schema
0a9a12593184 ASoC: dt-bindings: sound-card-common: List sound widgets ignoring system suspend
165648aad162 ARM: dts: stm32: add SPI support on STM32F746
8f3fa20269a0 ARM: dts: stm32: add STM32F746 syscfg clock
dc50601ba2d8 dt-bindings: net: xlnx,axi-ethernet: Introduce DMA support
72d23e1de1b0 arm64: dts: imx8mp: Add reserve-memory nodes for DSP
9bab315d31f8 spi: axi-spi-engine improvements
23a75f159231 ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco
4656437906e9 ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128
25251d661471 ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128
2d36fa2aa286 ARM: dts: rockchip: Add USB host clocks for RK3128
4e1bd401bbe3 ARM: dts: rockchip: Add Geniatech XPI-3128 RK3128 board
7e6458d9a7f3 ARM: dts: rockchip: Add sdmmc_det pinctrl for RK3128
12867f1ccb42 dt-bindings: arm: rockchip: Add Geniatech XPI-3128
fda729bcbd69 arm64: dts: rockchip: Add Powkiddy RK2023
317a36f59e1b arm64: dts: rockchip: Update powkiddy,rgb30 include to rk2023 DTSI
dc9a81379af6 dt-bindings: arm: rockchip: Add Powkiddy RK2023
70a31fd9ffa3 dt-bindings: spi: axi-spi-engine: convert to yaml
b68504144dbe Merge tag 'drm-misc-next-2023-11-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
8260e721d1b5 dt-bindings: display: nv3051d: Update NewVision NV3051D compatibles
0a502f9716cc arm64: dts: renesas: rzg3s-smarc: Enable SDHI1
eccf7ee1aefe arm64: dts: renesas: rzg3s-smarc-som: Enable SDHI2
fbd14cd9ff35 ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHY
c86d9749ca2a ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHY
1e1f6887a01b arm64: dts: allwinner: h616: add Orange Pi Zero 2W support
5795c68b5edc dt-bindings: arm: sunxi: add Orange Pi Zero 2W
a5b7fa02fbde dt-bindings: crypto: qcom,prng: document SM8650
53be5450f8ac dt-bindings: crypto: qcom-qce: document the SM8650 crypto engine
e65dc233e98b dt-bindings: crypto: qcom,inline-crypto-engine: document the SM8650 ICE
d2a2bd80cca6 dt-bindings: net: renesas,etheravb: Document RZ/Five SoC
f491b5315b58 dt-bindings: Document Marvell Aquantia PHY
7b52e889e53f arm64: dts: rockchip: add analog audio to RK3588 EVB1
92de4720f37c spi: dt-bindings: renesas,rspi: Document RZ/Five SoC
6e54c4bd7590 ASoC: dt-bindings: renesas,rz-ssi: Document RZ/Five SoC
87bb03481662 dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
91e2c8ceb4de dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property
f9fe5526efd5 dt-bindings: iio: Add MCP9600 thermocouple EMF converter
9942ece9d870 dt-bindings: iio: imu: Add Bosch BMI323
49d380d6e152 dt-bindings: adc: provide max34408/9 device tree binding document
895869158303 dt-bindings: media: wave5: add yaml devicetree bindings
77bf61c28407 dt-bindings: arm: Add support for DSB MSR register
18adf91da0ca dt-bindings: arm: Add support for DSB element size
075ac55ca93b dt-bindings: phy: qcom,snps-eusb2: document the SM8650 Synopsys eUSB2 PHY
fda8409f7058 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: document the SM8650 QMP USB/DP Combo PHY
b0b6815d9143 dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: document the SM8650 QMP PCIe PHYs
db24b834638a dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8650 QMP UFS PHY
6a737e056a8b media: dt-bindings: Add JH7110 Camera Subsystem
716cbea9d35a dt-bindings: power: reset: $ref reboot-mode in nvmem-reboot-mode
c8dedfdf167b dt-bindings: power: reset: $ref reboot-mode in syscon-reboot-mode
6c14a95472bb ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges
866767db6bbb ARM: dts: samsung: exynos4: fix camera unit addresses/ranges
f0d3848e2cef ARM: dts: samsung: exynos4x12: replace duplicate pmu node with phandle
dc6ff9889013 dt-bindings: w1: Add AMD AXI w1 host and MAINTAINERS entry
a8a9188e96a6 dt-bindings: power: fsl,scu-pd: Document imx8dl
f06b78172daa dt-bindings: qcom,pdc: Add compatible for SM8550
7a87643120eb dt-bindings: input: samsung,s6sy761: convert to DT schema
e4ccdd770c53 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64
7b213bd80e13 dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
892b87e000d2 dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
ce1b89aee7ea dt-bindings: pwm: samsung: add exynosautov920 compatible
5e6bd42714ad dt-bindings: serial: samsung: add exynosautov920-uart compatible
3ea12f0eff84 dt-bindings: samsung: usi: add exynosautov920-usi compatible
5b6e042a72b8 dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
2dff85192843 dt-bindings: samsung: exynos-sysreg: add exynosautov920 sysreg
3123103c12c0 dt-bindings: pinctrl: samsung: add exynosautov920
5b929ffdc9be arm64: dts: exynos: add gpio-key node for exynosautov9-sadk
6bc5effbe8dd arm64: dts: exynosautov9: add specific compatibles to several blocks
25addf827769 arm64: dts: exynos850: add specific compatibles to several blocks
5ab70c11f08f arm64: dts: exynos7885: add specific compatibles to several blocks
f7c77a1ea95a arm64: dts: exynos7: add specific compatibles to several blocks
56493af64c01 arm64: dts: exynos5433: add specific compatibles to several blocks
3530786802b6 dt-bindings: pwm: samsung: add specific compatibles for existing SoC
97419692fe3c ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC
7081448ca2cf dt-bindings: iio: samsung,exynos-adc: add specific compatibles for existing SoC
973115e1f51f dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC
6b99281097f0 dt-bindings: samsung: exynos-pmu: add specific compatibles for existing SoC
a893a294345b dt-bindings: serial: samsung: add specific compatibles for existing SoC
2a3d0691d56f dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC
7e49408d51e6 dt-bindings: pinctrl: samsung: add specific compatibles for existing SoC
1bb1eca74ad5 Merge drm/drm-next into drm-misc-next
e9731895ee20 dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC
33b5aa8f7d9a ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
fa1f536e3df0 ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
4e5382dc8820 ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
6be6ba7888ef ARM: dts: qcom: pm8921: Disable keypad by default
5917ae72cd70 ARM: dts: qcom: msm8974: move regulators to board files
551cbcd2547c ARM: dts: qcom: msm8960: drop useless rpm regulators node
6d9878cc6a6a ARM: dts: qcom: msm8660: move RPM regulators to board files
d0ed11e33ba0 ARM: dts: qcom: mdm9615: move RPM regulators to board files
1c636116afea ARM: dts: qcom: apq8064: move RPM regulators to board files
b9d11fecae9e ARM: dts: qcom: pm8058: switch to interrupts-extended
e8a26b432fd4 ARM: dts: qcom: pm8018: switch to interrupts-extended
86831cb445f6 ARM: dts: qcom: pm8921: switch to interrupts-extended
6d6c0b95e077 ARM: dts: qcom: pm8058: use defined IRQ flags
9d0903209824 ARM: dts: qcom: pm8921: move reg property
6a63db48b660 ARM: dts: qcom: pm8018: move reg property
9d6af1dd4790 ARM: dts: qcom: pm8921: reorder nodes
5db5515193a6 ARM: dts: qcom: pm8058: reorder nodes
d4df6f1babb5 ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
c56480ffb4b8 ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
f8574d2c7c62 ARM: dts: qcom: apq8064: split PMICs to separate dtsi files
298695290d90 ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
1c3c930ec46c ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
7f5541db889f ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
812cfe71b26a ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
f5c8a18b7116 ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
b7510b8da2f6 ARM: dts: qcom: msm8960: fix PMIC node labels
6475671dcca1 ARM: dts: qcom: msm8660: fix PMIC node labels
4dfac4d841ef ARM: dts: qcom: mdm9615: fix PMIC node labels
07091c1b87fb ARM: dts: qcom: apq8064: fix PMIC node labels
155004433670 ARM: dts: qcom: strip prefix from PMIC files
21220b16b281 ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
3d3f8059a9f6 ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
b9d136b033b8 ARM: dts: qcom: msm8660-surf: use keypad label directly
fc4f79da1abe ARM: dts: qcom: msm8960: introduce label for PMIC keypad
0e33f3448e7c ARM: dts: qcom: apq8064: correct XOADC register address
9bed8b24890a ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindings
edfbe32172f4 ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindings
c709366fb89e arm64: dts: qcom: sm8350: switch USB QMP PHY to new style of bindings
29a99a6d955d arm64: dts: qcom: sm8250: switch USB QMP PHY to new style of bindings
e13f8dc0ea91 arm64: dts: qcom: sm8150: switch USB QMP PHY to new style of bindings
bed6aed8ceec arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings
7cb8dff829b0 arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings
77a8ce42cb30 arm64: dts: qcom: msm8996: switch USB QMP PHY to new style of bindings
b92a18870b3e arm64: dts: qcom: ipq8074: switch USB QMP PHY to new style of bindings
18dd153b1c8f arm64: dts: qcom: ipq6018: switch USB QMP PHY to new style of bindings
ad3769d7933c Merge tag 'qcom-arm64-for-6.7-2' into arm64-for-6.8
8088e683c89b dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC
c15df41a0c35 dt-bindings: i2c: exynos5: add specific compatibles for existing SoC
d755df63e9df dt-bindings: hwinfo: samsung,exynos-chipid: add specific compatibles for existing SoC
6f4cb3f40711 arm64: dts: renesas: rzg2lc-smarc-som: Enable 4-bit tx support
5ddba1791b2b arm64: dts: renesas: rzg2l-smarc-som: Enable 4-bit tx support
75b8e7f58abe regulator: add under-voltage support (part 2)
791f1550a798 Add DMIC slew rate controls
e128625eb7cb dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer
c3c85cc965c8 dt-bindings: pinctrl: qcom,sm8650-lpass-lpi-pinctrl: add SM8650 LPASS
6da3c9fd1509 ARM: dts: renesas: marzen: Rename keyboard nodes
2d7a77894ba8 ARM: dts: renesas: iwg22d-sodimm: Fix stmpe node names
f4c62eb4fbd6 arm64: dts: renesas: Add missing ADV751[13] power supply properties
a94c426db9b8 ARM: dts: renesas: Add missing ADV751[13] power supply properties
f213adc3b192 ARM: dts: renesas: rcar-gen2: Fix I2C bus demux node names
127c56414e9f riscv: dts: renesas: Convert isa detection to new properties
9836c1c69324 ARM: dts: renesas: blanche: Add FLASH node
d446795daa00 ARM: dts: renesas: marzen: Add FLASH node
9a4a8a78013a spi: add stm32f7-spi compatible
e74e9793f9c7 regulator: dt-bindings: Add 'regulator-uv-less-critical-window-ms' property
eafbf4f37d51 regulator: dt-bindings: Allow system-critical marking for fixed-regulator
52381ed5b4ac regulator: dt-bindings: Add system-critical-regulator property
ec8f058714a6 dt-bindings: regulator: qcom,smd-rpm-regulator: Document PM8937 IC
cf118cc80e89 dt-bindings: regulator: qcom,spmi-regulator: Document PM8937 PMIC
2ae471b5eeb2 ASoC: dt-bindings: use "soundwire" as controller's node name in examples
caa17228e281 ASoC: dt-bindings: qcom,sm8250: add SM8550 sound card
2d2f997a2bdc dt-bindings: es8328: convert to DT schema format
68e113702391 ASoC: dt-bindings: Simplify port schema
eac536a576c7 ASoC: dt-bindings: nau8821: Add DMIC slew rate.
409f501ee9b2 dt-bindings: gpu: v3d: Add BCM2712's compatible
22f7441e8685 dt-bindings: display: ssd132x: Remove '-' before compatible enum
a3de98e60ec5 ARM: dts: qcom: add device tree for Nokia Lumia 830
9ad6bcd4499d ARM: dts: qcom: add device tree for Nokia Lumia 735
41ee9ea2aefd ARM: dts: qcom: add device tree for Microsoft Lumia 640 XL
0dc127c0d612 ARM: dts: qcom: add device tree for Microsoft Lumia 640
d30c995f440e ARM: dts: qcom: add common dt for MSM8x26 Lumias along with Nokia Lumia 630
ed92546211d5 dt-bindings: arm: qcom: Document MSM8x26-based Lumia phones
d783936fa1dc arm64: dts: qcom: msm8939-longcheer-l9100: Enable RGB LED
b14cb550d720 arm64: dts: qcom: msm8916-longcheer-l8910: Enable RGB LED
183a2f447424 arm64: dts: qcom: msm8939-samsung-a7: Add sound and modem
9b7d68606781 arm64: dts: qcom: msm8916-samsung-j5: Add sound and modem
f382f197e0c5 arm64: dts: qcom: msm8916-samsung-gt5: Add sound and modem
59a815c1572d arm64: dts: qcom: msm8916-longcheer-l8910: Add sound and modem
582b4cfec9a9 ARM: dts: qcom: msm8226: provide dsi phy clocks to mmcc
1703230be2a6 ARM: dts: qcom: msm8974: sort nodes by reg
e23f302820cb ARM: dts: qcom: msm8974: replace incorrect indentation in interconnect
373015625e6b arm64: dts: qcom: msm8916-longcheer-l8150: Add sound and modem
c1a66861dc32 arm64: dts: qcom: msm8916-asus-z00l: Add sound and modem
489f91f0dfcc arm64: dts: qcom: msm8916-alcatel-idol347: Add sound and modem
2f81e02a3b04 arm64: dts: qcom: msm8916-wingtech-wt88047: Add sound and modem
07047876d71e arm64: dts: qcom: msm8916-samsung-serranove: Add sound and modem
1d94420f32b0 arm64: dts: qcom: msm8916-samsung-a2015: Add sound and modem
9334b10d351c arm64: dts: qcom: msm8916: Add common msm8916-modem-qdsp6.dtsi
30b857e0f639 arm64: dts: qcom: msm8939: Add QDSP6
5b210c47425a arm64: dts: qcom: msm8916: Add QDSP6
f1aed61c2c48 arm64: dts: qcom: msm8939: Add BAM-DMUX WWAN
702f57c12856 arm64: dts: qcom: sc8280xp-x13s: add missing camera LED pin config
d21fc2d89cfd arm64: dts: qcom: pm7250b: Use correct node name for gpios
ecc4cb08c0f3 arm64: dts: qcom: sc7280: Add Camera Control Interface busses
c01ef95e3aa7 arm64: dts: qcom: sdm845-xiaomi-beryllium: enable flash led
fe3ccb41dafa arm64: dts: qcom: sdm845-oneplus: enable flash LED
0f6538f89c64 arm64: dts: qcom: sc8280xp-x13s: Use the correct DP PHY compatible
c9e8e85b1afd arm64: dts: qcom: msm8916-*: Fix alphabetic node order
9e38e840740d arm64: dts: qcom: msm8939-longcheer-l9100: Enable wcnss_mem
5cdb05e593ef arm64: dts: qcom: msm8916-samsung-gt5: Enable GPU
0d72dfbbf352 arm64: dts: qcom: ipq5332: include the GPLL0 as clock provider for mailbox
13c545bfe884 arm64: dts: qcom: ipq9574: include the GPLL0 as clock provider for mailbox
8b57686e7ad0 arm64: dts: qcom: ipq6018: include the GPLL0 as clock provider for mailbox
11d8f7a1bf44 arm64: dts: qcom: ipq8074: include the GPLL0 as clock provider for mailbox
9b0b036ea0de arm64: dts: qcom: ipq9574: populate the opp table based on the eFuse
f3636ba1edce arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse
8831b26a6579 arm64: dts: qcom: sdm670: add specific cpufreq compatible
8ce87f299cdb arm64: dts: qcom: sm8150: extend the size of the PDC resource
b3cbe4ff9c30 arm64: dts: qcom: ipq5018: add QUP1 SPI controller
f330c2991aa0 arm64: dts: qcom: qrb4210-rb2: don't force usb peripheral mode
daa68cbafb06 arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC
6232143457ae arm64: dts: qcom: sa8775p: Add RPMh sleep stats
973959c2edf1 arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node
4c021a56b758 arm64: dts: qcom: sm6375-pdx225: Add USBPHY regulators
6fb033b4f60e arm64: dts: qcom: sm6375-pdx225: Enable ATH10K WiFi
fa14ce25949b arm64: dts: qcom: sm6375-pdx225: Enable MSS
e77ac5cceb8e arm64: dts: qcom: sm6375: Add UART1
dec2e7998de5 arm64: dts: qcom: ipq9574: Enable WPS buttons
d3619641203e arm64: dts: qcom: ipq9574: Add common RDP dtsi file
9faa71835343 arm64: dts: qcom: ipq5018: Enable USB
71275274da1f arm64: dts: qcom: ipq5018: Add USB related nodes
af8b25f21479 arm64: dts: qcom: sc7280: add TRNG node
00e1b06bb47a arm64: dts: qcom: sa8775p: add TRNG node
ac7c5d2655a7 arm64: dts: qcom: sm8450: add TRNG node
0087dcd6513a arm64: dts: qcom: sm8550: add TRNG node

git-subtree-dir: dts/upstream
git-subtree-split: b35b9bd1d4eed2acf8bc38ec5b1b6eef6261b4f0

280 files changed, 5756 insertions, 2074 deletions

diff --git a/src/arm/amazon/alpine.dtsi b/src/arm/amazon/alpine.dtsi
index ff68dfb..90bd12f 100644
--- a/src/arm/amazon/alpine.dtsi
+++ b/src/arm/amazon/alpine.dtsi
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/src/arm/aspeed/aspeed-bmc-facebook-bletchley.dts b/src/arm/aspeed/aspeed-bmc-facebook-bletchley.dts
index e899de6..5be0e8f 100644
--- a/src/arm/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/src/arm/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -45,8 +45,8 @@
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/src/arm/aspeed/aspeed-bmc-facebook-wedge400.dts b/src/arm/aspeed/aspeed-bmc-facebook-wedge400.dts
index a677c82..5a8169b 100644
--- a/src/arm/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/src/arm/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -80,8 +80,8 @@
 		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/src/arm/aspeed/aspeed-bmc-opp-tacoma.dts b/src/arm/aspeed/aspeed-bmc-opp-tacoma.dts
index 3f6010e..213023b 100644
--- a/src/arm/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/src/arm/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -456,7 +456,7 @@
 	status = "okay";
 
 	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
 	};
 };
diff --git a/src/arm/aspeed/aspeed-g4.dtsi b/src/arm/aspeed/aspeed-g4.dtsi
index 530491a..857cb26 100644
--- a/src/arm/aspeed/aspeed-g4.dtsi
+++ b/src/arm/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git a/src/arm/aspeed/aspeed-g5.dtsi b/src/arm/aspeed/aspeed-g5.dtsi
index 04f98d1..e6f3cf3c 100644
--- a/src/arm/aspeed/aspeed-g5.dtsi
+++ b/src/arm/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -594,7 +595,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git a/src/arm/aspeed/aspeed-g6.dtsi b/src/arm/aspeed/aspeed-g6.dtsi
index c4d1faa..29f9469 100644
--- a/src/arm/aspeed/aspeed-g6.dtsi
+++ b/src/arm/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -488,6 +489,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -902,7 +904,6 @@
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@
 	i2c1: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@
 	i2c2: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@
 	i2c3: i2c-bus@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@
 	i2c4: i2c-bus@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@
 	i2c5: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@
 	i2c6: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@
 	i2c7: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@
 	i2c8: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@
 	i2c9: i2c-bus@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@
 	i2c10: i2c-bus@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@
 	i2c11: i2c-bus@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@
 	i2c12: i2c-bus@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@
 	i2c13: i2c-bus@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@
 	i2c14: i2c-bus@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@
 	i2c15: i2c-bus@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git a/src/arm/aspeed/ast2600-facebook-netbmc-common.dtsi b/src/arm/aspeed/ast2600-facebook-netbmc-common.dtsi
index 31590d3..00e5887 100644
--- a/src/arm/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/src/arm/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -35,8 +35,8 @@
 		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/src/arm/broadcom/bcm-cygnus.dtsi b/src/arm/broadcom/bcm-cygnus.dtsi
index f9f79ed..07ca0d9 100644
--- a/src/arm/broadcom/bcm-cygnus.dtsi
+++ b/src/arm/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git a/src/arm/broadcom/bcm-hr2.dtsi b/src/arm/broadcom/bcm-hr2.dtsi
index 788a680..75545b1 100644
--- a/src/arm/broadcom/bcm-hr2.dtsi
+++ b/src/arm/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/src/arm/broadcom/bcm-nsp.dtsi b/src/arm/broadcom/bcm-nsp.dtsi
index 9d20ba3..6a4482c 100644
--- a/src/arm/broadcom/bcm-nsp.dtsi
+++ b/src/arm/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/src/arm/broadcom/bcm2711-rpi.dtsi b/src/arm/broadcom/bcm2711-rpi.dtsi
index 98817a6..d233a19 100644
--- a/src/arm/broadcom/bcm2711-rpi.dtsi
+++ b/src/arm/broadcom/bcm2711-rpi.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
+#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -76,3 +77,7 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&xhci {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/src/arm/broadcom/bcm2711.dtsi b/src/arm/broadcom/bcm2711.dtsi
index 4a379a1..22c7f15 100644
--- a/src/arm/broadcom/bcm2711.dtsi
+++ b/src/arm/broadcom/bcm2711.dtsi
@@ -604,6 +604,20 @@
 			};
 		};
 
+		xhci: usb@7e9c0000 {
+			compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			/* DWC2 and this IP block share the same USB PHY,
+			 * enabling both at the same time results in lockups.
+			 * So keep this node disabled and let the bootloader
+			 * decide which interface should be enabled.
+			 */
+			status = "disabled";
+		};
+
 		v3d: gpu@7ec00000 {
 			compatible = "brcm,2711-v3d";
 			reg = <0x0 0x7ec00000 0x4000>,
diff --git a/src/arm/broadcom/bcm63138.dtsi b/src/arm/broadcom/bcm63138.dtsi
index 93281c4..4ef0228 100644
--- a/src/arm/broadcom/bcm63138.dtsi
+++ b/src/arm/broadcom/bcm63138.dtsi
@@ -232,6 +232,12 @@
 			interrupt-names = "nand";
 		};
 
+		serial@4400 {
+			compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+			reg = <0x4400 0x1e0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		bootlut: bootlut@8000 {
 			compatible = "brcm,bcm63138-bootlut";
 			reg = <0x8000 0x50>;
diff --git a/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts b/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6a..6d5e690 100644
--- a/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ b/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git a/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts b/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169..5f4c849 100644
--- a/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ b/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git a/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts b/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
index 90fd51b..2c89db3 100644
--- a/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
+++ b/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
@@ -165,6 +165,24 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				/*
+				 * PHY 0..4 are internal to the MV88E6060 switch but appear
+				 * as independent devices.
+				 */
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+
+				/* Altima AMI101L used by the WAN port */
 				phy9: ethernet-phy@9 {
 					reg = <9>;
 				};
@@ -181,21 +199,25 @@
 						port@0 {
 							reg = <0>;
 							label = "lan1";
+							phy-handle = <&phy0>;
 						};
 
 						port@1 {
 							reg = <1>;
 							label = "lan2";
+							phy-handle = <&phy1>;
 						};
 
 						port@2 {
 							reg = <2>;
 							label = "lan3";
+							phy-handle = <&phy2>;
 						};
 
 						port@3 {
 							reg = <3>;
 							label = "lan4";
+							phy-handle = <&phy3>;
 						};
 
 						port@5 {
diff --git a/src/arm/intel/socfpga/socfpga.dtsi b/src/arm/intel/socfpga/socfpga.dtsi
index 4c1d140..35be141 100644
--- a/src/arm/intel/socfpga/socfpga.dtsi
+++ b/src/arm/intel/socfpga/socfpga.dtsi
@@ -768,7 +768,7 @@
 			status = "disabled";
 		};
 
-		nand0: nand@ff900000 {
+		nand0: nand-controller@ff900000 {
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			compatible = "altr,socfpga-denali-nand";
diff --git a/src/arm/intel/socfpga/socfpga_arria10.dtsi b/src/arm/intel/socfpga/socfpga_arria10.dtsi
index f36063c..6b6e775 100644
--- a/src/arm/intel/socfpga/socfpga_arria10.dtsi
+++ b/src/arm/intel/socfpga/socfpga_arria10.dtsi
@@ -669,7 +669,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
diff --git a/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts
index 11ccdc6..0434f1c 100644
--- a/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts
+++ b/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -17,8 +17,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <3>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_arria5_socdk.dts b/src/arm/intel/socfpga/socfpga_arria5_socdk.dts
index c483857..7342f59 100644
--- a/src/arm/intel/socfpga/socfpga_arria5_socdk.dts
+++ b/src/arm/intel/socfpga/socfpga_arria5_socdk.dts
@@ -124,8 +124,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts b/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts
index c7f5fa0..d37a982 100644
--- a/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -129,8 +129,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts b/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts
index 3dd99c7..9e4db74 100644
--- a/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -174,8 +174,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts b/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts
index 2564671..ce0d651 100644
--- a/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -121,8 +121,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index e0630b0..65f390b 100644
--- a/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -229,8 +229,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -246,8 +244,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/marvell/armada-370-rd.dts b/src/arm/marvell/armada-370-rd.dts
index b459a67..f23f6b3 100644
--- a/src/arm/marvell/armada-370-rd.dts
+++ b/src/arm/marvell/armada-370-rd.dts
@@ -95,7 +95,7 @@
 			gpio-fan {
 				compatible = "gpio-fan";
 				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
+				gpio-fan,speed-map = <0 0>, <3000 1>;
 				pinctrl-0 = <&fan_pins>;
 				pinctrl-names = "default";
 			};
@@ -149,39 +149,37 @@
 		};
 	};
 
-	switch: switch@10 {
+	switch: ethernet-switch@10 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x10>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -196,25 +194,25 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switchphy0: switchphy@0 {
+			switchphy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy1: switchphy@1 {
+			switchphy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy2: switchphy@2 {
+			switchphy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy3: switchphy@3 {
+			switchphy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm/marvell/armada-370-seagate-nas-2bay.dts b/src/arm/marvell/armada-370-seagate-nas-2bay.dts
index 8dd242e..6ec3dd3 100644
--- a/src/arm/marvell/armada-370-seagate-nas-2bay.dts
+++ b/src/arm/marvell/armada-370-seagate-nas-2bay.dts
@@ -25,9 +25,9 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
+			<   0 3>,
+			< 950 2>,
+			<1400 1>,
+			<1800 0>;
 	};
 };
diff --git a/src/arm/marvell/armada-370-seagate-nas-4bay.dts b/src/arm/marvell/armada-370-seagate-nas-4bay.dts
index 370ca9c..3011578 100644
--- a/src/arm/marvell/armada-370-seagate-nas-4bay.dts
+++ b/src/arm/marvell/armada-370-seagate-nas-4bay.dts
@@ -106,10 +106,10 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
+			<   0 3>,
+			< 800 2>,
+			<1050 1>,
+			<1300 0>;
 	};
 };
 
diff --git a/src/arm/marvell/armada-370-synology-ds213j.dts b/src/arm/marvell/armada-370-synology-ds213j.dts
index b07d11d..02599a3 100644
--- a/src/arm/marvell/armada-370-synology-ds213j.dts
+++ b/src/arm/marvell/armada-370-synology-ds213j.dts
@@ -113,14 +113,14 @@
 			 &gpio2  0 GPIO_ACTIVE_HIGH
 			 &gpio2  1 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
+		gpio-fan,speed-map = <   0 0>,
+				     <1000 1>,
+				     <1150 2>,
+				     <1350 4>,
+				     <1500 3>,
+				     <1650 5>,
+				     <1750 6>,
+				     <1900 7>;
 	};
 
 	gpio-leds {
diff --git a/src/arm/marvell/armada-381-netgear-gs110emx.dts b/src/arm/marvell/armada-381-netgear-gs110emx.dts
index f4c4b21..5baf83e 100644
--- a/src/arm/marvell/armada-381-netgear-gs110emx.dts
+++ b/src/arm/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@
 	pinctrl-0 = <&mdio_pins>;
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&switch_interrupt_pins>;
 		pinctrl-names = "default";
-		#size-cells = <0>;
 		reg = <0>;
 
 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -142,11 +140,11 @@
 			};
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				ethernet = <&eth0>;
 				phy-mode = "rgmii";
 				reg = <0>;
@@ -158,55 +156,55 @@
 				};
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 				reg = <1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				label = "lan2";
 				phy-handle = <&switch0phy2>;
 				reg = <2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 				reg = <3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 				reg = <4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				label = "lan5";
 				phy-handle = <&switch0phy5>;
 				reg = <5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				label = "lan6";
 				phy-handle = <&switch0phy6>;
 				reg = <6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				label = "lan7";
 				phy-handle = <&switch0phy7>;
 				reg = <7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				label = "lan8";
 				phy-handle = <&switch0phy8>;
 				reg = <8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				/* 88X3310P external phy */
 				label = "lan9";
 				phy-handle = <&phy1>;
@@ -214,7 +212,7 @@
 				reg = <9>;
 			};
 
-			port@a {
+			ethernet-port@a {
 				/* 88X3310P external phy */
 				label = "lan10";
 				phy-handle = <&phy2>;
diff --git a/src/arm/marvell/armada-385-clearfog-gtr-l8.dts b/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d..1707d1b 100644
--- a/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,66 +7,66 @@
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6190";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan8";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan7";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan6";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan5";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "lan3";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "lan2";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "lan1";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@10 {
+			ethernet-port@10 {
 				reg = <10>;
 				phy-mode = "2500base-x";
 
@@ -83,35 +83,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@1 {
+			switch0phy0: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy1: switch0phy1@2 {
+			switch0phy1: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy2: switch0phy2@3 {
+			switch0phy2: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy3: switch0phy3@4 {
+			switch0phy3: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy4: switch0phy4@5 {
+			switch0phy4: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy5: switch0phy5@6 {
+			switch0phy5: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy6: switch0phy6@7 {
+			switch0phy6: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy7: switch0phy7@8 {
+			switch0phy7: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/src/arm/marvell/armada-385-clearfog-gtr-s4.dts b/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad5..a7678a7 100644
--- a/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,42 +11,42 @@
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "2500base-x";
 				ethernet = <&eth1>;
@@ -63,19 +63,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/src/arm/marvell/armada-385-linksys.dtsi b/src/arm/marvell/armada-385-linksys.dtsi
index fc8216f..4116ed6 100644
--- a/src/arm/marvell/armada-385-linksys.dtsi
+++ b/src/arm/marvell/armada-385-linksys.dtsi
@@ -158,42 +158,40 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "sgmii";
 				ethernet = <&eth2>;
diff --git a/src/arm/marvell/armada-385-synology-ds116.dts b/src/arm/marvell/armada-385-synology-ds116.dts
index ea91ff9..6caa5c5 100644
--- a/src/arm/marvell/armada-385-synology-ds116.dts
+++ b/src/arm/marvell/armada-385-synology-ds116.dts
@@ -131,14 +131,14 @@
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
 				<&gpio1 17 GPIO_ACTIVE_HIGH>,
 				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
+			gpio-fan,speed-map = <   0 0>,
+					     <1500 1>,
+					     <2500 2>,
+					     <3000 3>,
+					     <3400 4>,
+					     <3700 5>,
+					     <3900 6>,
+					     <4000 7>;
 			#cooling-cells = <2>;
 		};
 
diff --git a/src/arm/marvell/armada-385-turris-omnia.dts b/src/arm/marvell/armada-385-turris-omnia.dts
index 2d8d319..7b755bb 100644
--- a/src/arm/marvell/armada-385-turris-omnia.dts
+++ b/src/arm/marvell/armada-385-turris-omnia.dts
@@ -435,12 +435,10 @@
 	};
 
 	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
+	ethernet-switch@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		dsa,member = <0 0>;
 		reg = <0x10>;
@@ -448,36 +446,36 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ports@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			ports@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			ports@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			ports@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			ports@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan4";
 			};
 
-			ports@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@
 				};
 			};
 
-			ports@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				ethernet = <&eth0>;
 				phy-mode = "rgmii-id";
diff --git a/src/arm/marvell/armada-388-clearfog.dts b/src/arm/marvell/armada-388-clearfog.dts
index 32c569d..3290cca 100644
--- a/src/arm/marvell/armada-388-clearfog.dts
+++ b/src/arm/marvell/armada-388-clearfog.dts
@@ -92,44 +92,42 @@
 &mdio {
 	status = "okay";
 
-	switch@4 {
+	ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <4>;
 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 		pinctrl-names = "default";
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan5";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan4";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan3";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan1";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "1000base-x";
@@ -140,7 +138,7 @@
 				};
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				/* 88E1512 external phy */
 				reg = <6>;
 				label = "lan6";
diff --git a/src/arm/marvell/armada-388-gp.dts b/src/arm/marvell/armada-388-gp.dts
index e2ba505..1de0a17 100644
--- a/src/arm/marvell/armada-388-gp.dts
+++ b/src/arm/marvell/armada-388-gp.dts
@@ -237,8 +237,8 @@
 		gpio-fan {
 			compatible = "gpio-fan";
 			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
+			gpio-fan,speed-map = <	 0 0>,
+					     <3000 1>;
 		};
 	};
 
diff --git a/src/arm/marvell/armada-xp-linksys-mamba.dts b/src/arm/marvell/armada-xp-linksys-mamba.dts
index 7a0614f..ea859f7 100644
--- a/src/arm/marvell/armada-xp-linksys-mamba.dts
+++ b/src/arm/marvell/armada-xp-linksys-mamba.dts
@@ -265,42 +265,40 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "internet";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;
diff --git a/src/arm/marvell/kirkwood-dnskw.dtsi b/src/arm/marvell/kirkwood-dnskw.dtsi
index eb91746..0738eb6 100644
--- a/src/arm/marvell/kirkwood-dnskw.dtsi
+++ b/src/arm/marvell/kirkwood-dnskw.dtsi
@@ -38,9 +38,9 @@
 		pinctrl-names = "default";
 		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
 			 &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
+		gpio-fan,speed-map = <0    0>,
+				     <3000 1>,
+				     <6000 2>;
 	};
 
 	gpio_poweroff {
diff --git a/src/arm/marvell/kirkwood-l-50.dts b/src/arm/marvell/kirkwood-l-50.dts
index dffb9f8..c841eb8 100644
--- a/src/arm/marvell/kirkwood-l-50.dts
+++ b/src/arm/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@
 			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -79,6 +80,7 @@
 			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
diff --git a/src/arm/marvell/kirkwood-linkstation-6282.dtsi b/src/arm/marvell/kirkwood-linkstation-6282.dtsi
index 377b6e9..dfac204 100644
--- a/src/arm/marvell/kirkwood-linkstation-6282.dtsi
+++ b/src/arm/marvell/kirkwood-linkstation-6282.dtsi
@@ -118,10 +118,11 @@
 		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
 			 &gpio0 16 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm/marvell/kirkwood-linkstation-lswxl.dts b/src/arm/marvell/kirkwood-linkstation-lswxl.dts
index c6024b5..0425df8 100644
--- a/src/arm/marvell/kirkwood-linkstation-lswxl.dts
+++ b/src/arm/marvell/kirkwood-linkstation-lswxl.dts
@@ -69,10 +69,11 @@
 		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
 			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm/marvell/kirkwood-lsxl.dtsi b/src/arm/marvell/kirkwood-lsxl.dtsi
index 88b70ba..f80af24 100644
--- a/src/arm/marvell/kirkwood-lsxl.dtsi
+++ b/src/arm/marvell/kirkwood-lsxl.dtsi
@@ -172,10 +172,11 @@
 		pinctrl-names = "default";
 		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
 		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
+		gpio-fan,speed-map =
+				<0    3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
diff --git a/src/arm/marvell/kirkwood-ns2max.dts b/src/arm/marvell/kirkwood-ns2max.dts
index c0a087e..044958b 100644
--- a/src/arm/marvell/kirkwood-ns2max.dts
+++ b/src/arm/marvell/kirkwood-ns2max.dts
@@ -29,15 +29,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
+			<   0  0>,
+			<1500 15>,
+			<1700 14>,
+			<1800 13>,
+			<2100 12>,
+			<3100 11>,
+			<3300 10>,
+			<4300  9>,
+			<5500  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/src/arm/marvell/kirkwood-ns2mini.dts b/src/arm/marvell/kirkwood-ns2mini.dts
index 5b9fa14..3fbe008 100644
--- a/src/arm/marvell/kirkwood-ns2mini.dts
+++ b/src/arm/marvell/kirkwood-ns2mini.dts
@@ -30,15 +30,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
+			<   0  0>,
+			<3000 15>,
+			<3180 14>,
+			<4140 13>,
+			<4570 12>,
+			<6760 11>,
+			<7140 10>,
+			<7980  9>,
+			<9200  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/src/arm/marvell/kirkwood-synology.dtsi b/src/arm/marvell/kirkwood-synology.dtsi
index 9b66660..20964eb 100644
--- a/src/arm/marvell/kirkwood-synology.dtsi
+++ b/src/arm/marvell/kirkwood-synology.dtsi
@@ -286,14 +286,15 @@
 		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-150-15-18 {
@@ -306,14 +307,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-100-32-35 {
@@ -326,14 +328,15 @@
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-18 {
@@ -346,14 +349,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-1 {
@@ -366,14 +370,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-3 {
@@ -388,14 +393,15 @@
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
 			       &gpio1 12 GPIO_ACTIVE_HIGH
 			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-leds-alarm-12 {
diff --git a/src/arm/marvell/mvebu-linkstation-fan.dtsi b/src/arm/marvell/mvebu-linkstation-fan.dtsi
index e172029..a260c42 100644
--- a/src/arm/marvell/mvebu-linkstation-fan.dtsi
+++ b/src/arm/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@
 		pinctrl-names = "default";
 
 		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
+			<   0 3>,
+			<1500 2>,
+			<3250 1>,
+			<5000 0>;
 	};
 };
 
diff --git a/src/arm/microchip/at91-sam9x60_curiosity.dts b/src/arm/microchip/at91-sam9x60_curiosity.dts
index 83372c1..c6fbdd2 100644
--- a/src/arm/microchip/at91-sam9x60_curiosity.dts
+++ b/src/arm/microchip/at91-sam9x60_curiosity.dts
@@ -249,6 +249,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -353,6 +355,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
diff --git a/src/arm/microchip/at91-sam9x60ek.dts b/src/arm/microchip/at91-sam9x60ek.dts
index 5cd5930..f3cbb67 100644
--- a/src/arm/microchip/at91-sam9x60ek.dts
+++ b/src/arm/microchip/at91-sam9x60ek.dts
@@ -292,6 +292,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -465,6 +467,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
diff --git a/src/arm/microchip/at91-sama5d27_som1_ek.dts b/src/arm/microchip/at91-sama5d27_som1_ek.dts
index d0a6dbd..f3ffb8f 100644
--- a/src/arm/microchip/at91-sama5d27_som1_ek.dts
+++ b/src/arm/microchip/at91-sama5d27_som1_ek.dts
@@ -54,7 +54,6 @@
 
 		sdmmc0: sdio-host@a0000000 {
 			bus-width = <8>;
-			mmc-ddr-3_3v;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			status = "okay";
diff --git a/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts b/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts
index e055b9e..1523983 100644
--- a/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,7 +197,6 @@
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git a/src/arm/nuvoton/nuvoton-wpcm450.dtsi b/src/arm/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7..6e1f0f1 100644
--- a/src/arm/nuvoton/nuvoton-wpcm450.dtsi
+++ b/src/arm/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -128,6 +129,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
diff --git a/src/arm/nvidia/tegra20-colibri.dtsi b/src/arm/nvidia/tegra20-colibri.dtsi
index 16b374e..8c1d5c9 100644
--- a/src/arm/nvidia/tegra20-colibri.dtsi
+++ b/src/arm/nvidia/tegra20-colibri.dtsi
@@ -446,7 +446,7 @@
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
 		nvidia,codec-reset-gpio =
-			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 		nvidia,codec-sync-gpio =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm/nvidia/tegra30-apalis-v1.1.dtsi b/src/arm/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763..ff0d684 100644
--- a/src/arm/nvidia/tegra30-apalis-v1.1.dtsi
+++ b/src/arm/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/src/arm/nvidia/tegra30-apalis.dtsi b/src/arm/nvidia/tegra30-apalis.dtsi
index 3b6fad2..d38f1dd 100644
--- a/src/arm/nvidia/tegra30-apalis.dtsi
+++ b/src/arm/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/src/arm/nvidia/tegra30-colibri.dtsi b/src/arm/nvidia/tegra30-colibri.dtsi
index 4eb526f..81c8a5f 100644
--- a/src/arm/nvidia/tegra30-colibri.dtsi
+++ b/src/arm/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/src/arm/nxp/imx/imx1-ads.dts b/src/arm/nxp/imx/imx1-ads.dts
index 5833fb6..2c817c4 100644
--- a/src/arm/nxp/imx/imx1-ads.dts
+++ b/src/arm/nxp/imx/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git a/src/arm/nxp/imx/imx1-apf9328.dts b/src/arm/nxp/imx/imx1-apf9328.dts
index 1f11e95..e66eef8 100644
--- a/src/arm/nxp/imx/imx1-apf9328.dts
+++ b/src/arm/nxp/imx/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/src/arm/nxp/imx/imx1.dtsi b/src/arm/nxp/imx/imx1.dtsi
index e312f1e..1ac1096 100644
--- a/src/arm/nxp/imx/imx1.dtsi
+++ b/src/arm/nxp/imx/imx1.dtsi
@@ -68,7 +68,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@200000 {
+		bus@200000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -155,7 +155,7 @@
 			};
 		};
 
-		aipi@210000 {
+		bus@210000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/src/arm/nxp/imx/imx25-eukrea-cpuimx25.dtsi b/src/arm/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 0703f62..93a6e4e 100644
--- a/src/arm/nxp/imx/imx25-eukrea-cpuimx25.dtsi
+++ b/src/arm/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index fc8a502..6cddb2c 100644
--- a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96..64b2ffa 100644
--- a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1..fb074bf 100644
--- a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git a/src/arm/nxp/imx/imx25-pdk.dts b/src/arm/nxp/imx/imx25-pdk.dts
index 04f4b12..dd176fb 100644
--- a/src/arm/nxp/imx/imx25-pdk.dts
+++ b/src/arm/nxp/imx/imx25-pdk.dts
@@ -68,7 +68,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
@@ -122,6 +122,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks 129>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/src/arm/nxp/imx/imx25.dtsi b/src/arm/nxp/imx/imx25.dtsi
index 534c70b..9cfff21 100644
--- a/src/arm/nxp/imx/imx25.dtsi
+++ b/src/arm/nxp/imx/imx25.dtsi
@@ -68,6 +68,16 @@
 		};
 	};
 
+	usbphy0: usb-phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usbphy1: usb-phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -93,7 +103,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f80000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <3>;
 				status = "disabled";
 			};
@@ -104,7 +114,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f84000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -151,7 +161,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f98000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <4>;
 				status = "disabled";
 			};
@@ -178,12 +188,9 @@
 			};
 
 			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 				reg = <0x43fa8000 0x4000>;
 				clocks = <&clks 102>;
-				clock-names = "";
 				interrupts = <24>;
 				status = "disabled";
 			};
@@ -542,7 +549,7 @@
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
@@ -597,7 +604,7 @@
 			#size-cells = <1>;
 		};
 
-		emi@80000000 {
+		bus@80000000 {
 			compatible = "fsl,emi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -617,22 +624,4 @@
 			};
 		};
 	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-	};
 };
diff --git a/src/arm/nxp/imx/imx27-apf27dev.dts b/src/arm/nxp/imx/imx27-apf27dev.dts
index a21f1f7..849306c 100644
--- a/src/arm/nxp/imx/imx27-apf27dev.dts
+++ b/src/arm/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
@@ -47,7 +47,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi b/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index 74110bb..c7e9235 100644
--- a/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi
+++ b/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -90,7 +90,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/src/arm/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/src/arm/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 145e459..d787936 100644
--- a/src/arm/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/src/arm/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/src/arm/nxp/imx/imx27-pdk.dts b/src/arm/nxp/imx/imx27-pdk.dts
index 35123b7..21d4369 100644
--- a/src/arm/nxp/imx/imx27-pdk.dts
+++ b/src/arm/nxp/imx/imx27-pdk.dts
@@ -14,18 +14,12 @@
 		reg = <0xa0000000 0x08000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/src/arm/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 25442eb..27c93b9 100644
--- a/src/arm/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ b/src/arm/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
diff --git a/src/arm/nxp/imx/imx27-phytec-phycore-rdk.dts b/src/arm/nxp/imx/imx27-phytec-phycore-rdk.dts
index 7f0cd4d..b8048e1 100644
--- a/src/arm/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ b/src/arm/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
@@ -48,15 +48,12 @@
 		regulator-always-on;
 	};
 
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy2: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_5v0>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx27-phytec-phycore-som.dtsi b/src/arm/nxp/imx/imx27-phytec-phycore-som.dtsi
index 7b2ea4c..e958d72 100644
--- a/src/arm/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/src/arm/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -29,19 +29,13 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&sw3_reg>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
@@ -49,12 +43,12 @@
 	status = "okay";
 
 	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <0xcb205000>;
 	};
 
-	pins4 {
+	mux-pins4 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <0x00001000>;
 	};
@@ -186,7 +180,7 @@
 		reg = <0x52>;
 	};
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -314,7 +308,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/src/arm/nxp/imx/imx27.dtsi b/src/arm/nxp/imx/imx27.dtsi
index faba12e..ec47269 100644
--- a/src/arm/nxp/imx/imx27.dtsi
+++ b/src/arm/nxp/imx/imx27.dtsi
@@ -81,7 +81,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi1: aipi@10000000 { /* AIPI1 */
+		aipi1: bus@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -453,7 +453,7 @@
 			};
 		};
 
-		aipi2: aipi@10020000 { /* AIPI2 */
+		aipi2: bus@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -588,6 +588,9 @@
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/src/arm/nxp/imx/imx53-cx9020.dts b/src/arm/nxp/imx/imx53-cx9020.dts
index 055d23a..0814f56 100644
--- a/src/arm/nxp/imx/imx53-cx9020.dts
+++ b/src/arm/nxp/imx/imx53-cx9020.dts
@@ -22,7 +22,7 @@
 	};
 
 	display-0 {
-		#address-cells =<1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "rgb24";
diff --git a/src/arm/nxp/imx/imx6dl-b105pv2.dts b/src/arm/nxp/imx/imx6dl-b105pv2.dts
index 7d4ae11..63cdf24 100644
--- a/src/arm/nxp/imx/imx6dl-b105pv2.dts
+++ b/src/arm/nxp/imx/imx6dl-b105pv2.dts
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/src/arm/nxp/imx/imx6dl-b105v2.dts b/src/arm/nxp/imx/imx6dl-b105v2.dts
index 9c5938e..2e75d70 100644
--- a/src/arm/nxp/imx/imx6dl-b105v2.dts
+++ b/src/arm/nxp/imx/imx6dl-b105v2.dts
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/src/arm/nxp/imx/imx6dl-b125pv2.dts b/src/arm/nxp/imx/imx6dl-b125pv2.dts
index 01df7cf..94625d5 100644
--- a/src/arm/nxp/imx/imx6dl-b125pv2.dts
+++ b/src/arm/nxp/imx/imx6dl-b125pv2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/src/arm/nxp/imx/imx6dl-b125v2.dts b/src/arm/nxp/imx/imx6dl-b125v2.dts
index a015453..b3cfa81 100644
--- a/src/arm/nxp/imx/imx6dl-b125v2.dts
+++ b/src/arm/nxp/imx/imx6dl-b125v2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/src/arm/nxp/imx/imx6dl-b155v2.dts b/src/arm/nxp/imx/imx6dl-b155v2.dts
index b71ee6b..7edc788 100644
--- a/src/arm/nxp/imx/imx6dl-b155v2.dts
+++ b/src/arm/nxp/imx/imx6dl-b155v2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h84";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		touchscreen-inverted-x;
diff --git a/src/arm/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/src/arm/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 717decd..3ac7a45 100644
--- a/src/arm/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ b/src/arm/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -76,6 +76,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can1_power>;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -85,6 +86,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can2_power>;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx6q-b850v3.dts b/src/arm/nxp/imx/imx6q-b850v3.dts
index db8c332..cad112e 100644
--- a/src/arm/nxp/imx/imx6q-b850v3.dts
+++ b/src/arm/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git a/src/arm/nxp/imx/imx6q-bx50v3.dtsi b/src/arm/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6a..c1ae7c4 100644
--- a/src/arm/nxp/imx/imx6q-bx50v3.dtsi
+++ b/src/arm/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx6q-var-mx6customboard.dts b/src/arm/nxp/imx/imx6q-var-mx6customboard.dts
index 6f9d094..18a6208 100644
--- a/src/arm/nxp/imx/imx6q-var-mx6customboard.dts
+++ b/src/arm/nxp/imx/imx6q-var-mx6customboard.dts
@@ -16,7 +16,7 @@
 	compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q";
 
 	panel0: lvds-panel0 {
-		compatible =  "panel-lvds";
+		compatible = "panel-lvds";
 		backlight = <&backlight_lvds>;
 		width-mm = <152>;
 		height-mm = <91>;
@@ -43,7 +43,7 @@
 	};
 
 	panel1: lvds-panel1 {
-		compatible =  "panel-lvds";
+		compatible = "panel-lvds";
 		width-mm = <152>;
 		height-mm = <91>;
 		data-mapping = "jeida-18";
diff --git a/src/arm/nxp/imx/imx6qdl-apalis.dtsi b/src/arm/nxp/imx/imx6qdl-apalis.dtsi
index 4cc9652..ea40623 100644
--- a/src/arm/nxp/imx/imx6qdl-apalis.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-apalis.dtsi
@@ -12,6 +12,13 @@
 	model = "Toradex Apalis iMX6Q/D Module";
 	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
 
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC1 slot */
+		mmc2 = &usdhc2; /* SD1 slot */
+		/delete-property/ mmc3;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		device_type = "memory";
@@ -166,7 +173,7 @@
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
 		regulator-max-microvolt = <5000000>;
@@ -619,7 +626,6 @@
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/src/arm/nxp/imx/imx6qdl-colibri.dtsi b/src/arm/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a..d3a7a6e 100644
--- a/src/arm/nxp/imx/imx6qdl-colibri.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-colibri.dtsi
@@ -12,6 +12,13 @@
 	model = "Toradex Colibri iMX6DL/S Module";
 	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
 
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD Slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <0 45 63 88 119 158 203 255>;
@@ -543,7 +550,6 @@
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/src/arm/nxp/imx/imx6qdl-emcon-avari.dtsi b/src/arm/nxp/imx/imx6qdl-emcon-avari.dtsi
index f1a41c7..5587069 100644
--- a/src/arm/nxp/imx/imx6qdl-emcon-avari.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-emcon-avari.dtsi
@@ -54,7 +54,7 @@
 	clk_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <12000000>;
+		clock-frequency = <12000000>;
 	};
 
 	sound {
diff --git a/src/arm/nxp/imx/imx6qdl-emcon.dtsi b/src/arm/nxp/imx/imx6qdl-emcon.dtsi
index a63e73a..42b2ba2 100644
--- a/src/arm/nxp/imx/imx6qdl-emcon.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/src/arm/nxp/imx/imx6qdl-mba6.dtsi b/src/arm/nxp/imx/imx6qdl-mba6.dtsi
index da0f8da..4d2abcd 100644
--- a/src/arm/nxp/imx/imx6qdl-mba6.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-mba6.dtsi
@@ -500,21 +500,21 @@
 
 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
 		>;
 	};
diff --git a/src/arm/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/src/arm/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 1139745..c0c47ad 100644
--- a/src/arm/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
 		interrupt-controller;
 
 		regulators {
diff --git a/src/arm/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/src/arm/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269..85e278e 100644
--- a/src/arm/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/src/arm/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/src/arm/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
index b81799d..596b3bb 100644
--- a/src/arm/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
@@ -25,7 +25,7 @@
 		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_touch>;
-		pinctrl-names ="default";
+		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
 		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
 		#io-channel-cells = <1>;
diff --git a/src/arm/nxp/imx/imx6qdl.dtsi b/src/arm/nxp/imx/imx6qdl.dtsi
index bda182e..81142c5 100644
--- a/src/arm/nxp/imx/imx6qdl.dtsi
+++ b/src/arm/nxp/imx/imx6qdl.dtsi
@@ -475,7 +475,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 							"txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
diff --git a/src/arm/nxp/imx/imx6sx.dtsi b/src/arm/nxp/imx/imx6sx.dtsi
index f6b3592..df3a375 100644
--- a/src/arm/nxp/imx/imx6sx.dtsi
+++ b/src/arm/nxp/imx/imx6sx.dtsi
@@ -418,7 +418,7 @@
 					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
@@ -1010,7 +1010,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1024,7 +1024,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1038,7 +1038,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
diff --git a/src/arm/nxp/imx/imx6ul.dtsi b/src/arm/nxp/imx/imx6ul.dtsi
index 3b87d98..a27a755 100644
--- a/src/arm/nxp/imx/imx6ul.dtsi
+++ b/src/arm/nxp/imx/imx6ul.dtsi
@@ -364,7 +364,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
diff --git a/src/arm/nxp/imx/imx6ull-phytec-tauri.dtsi b/src/arm/nxp/imx/imx6ull-phytec-tauri.dtsi
index 44cc4ff..d12fb44 100644
--- a/src/arm/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ b/src/arm/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -116,7 +116,7 @@
 	tpm_tis: tpm@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <1>;
 		spi-max-frequency = <20000000>;
 		interrupt-parent = <&gpio5>;
diff --git a/src/arm/nxp/imx/imx7-tqma7.dtsi b/src/arm/nxp/imx/imx7-tqma7.dtsi
index fe42b0a..3fc3130 100644
--- a/src/arm/nxp/imx/imx7-tqma7.dtsi
+++ b/src/arm/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@
 		};
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
+	/* LM75A temperature sensor, TQMa7x 01xx */
+	lm75a: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
 	se97b: temperature-sensor-eeprom@1e {
 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1e>;
-		status = "okay";
 	};
 
 	/* ST M24C64 */
diff --git a/src/arm/nxp/imx/imx7d-colibri-emmc.dtsi b/src/arm/nxp/imx/imx7d-colibri-emmc.dtsi
index 3740e34..9670f45 100644
--- a/src/arm/nxp/imx/imx7d-colibri-emmc.dtsi
+++ b/src/arm/nxp/imx/imx7d-colibri-emmc.dtsi
@@ -11,6 +11,10 @@
 		/* Required to properly pass MAC addresses from bootloader. */
 		ethernet0 = &fec1;
 		ethernet1 = &fec2;
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	memory@80000000 {
diff --git a/src/arm/nxp/imx/imx7d-flex-concentrator.dts b/src/arm/nxp/imx/imx7d-flex-concentrator.dts
index 3a72384..9984b34 100644
--- a/src/arm/nxp/imx/imx7d-flex-concentrator.dts
+++ b/src/arm/nxp/imx/imx7d-flex-concentrator.dts
@@ -130,7 +130,7 @@
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
-	st33htph: tpm-tis@0 {
+	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
diff --git a/src/arm/nxp/imx/imx7d-meerkat96.dts b/src/arm/nxp/imx/imx7d-meerkat96.dts
index dd8003b..f0fda15 100644
--- a/src/arm/nxp/imx/imx7d-meerkat96.dts
+++ b/src/arm/nxp/imx/imx7d-meerkat96.dts
@@ -212,7 +212,7 @@
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_wlreg_on>;
-	vqmmc-supply =<&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
 	status = "okay";
 
 	brcmf: wifi@1 {
diff --git a/src/arm/nxp/imx/imx7d-pico-dwarf.dts b/src/arm/nxp/imx/imx7d-pico-dwarf.dts
index 12361fc..1b96565 100644
--- a/src/arm/nxp/imx/imx7d-pico-dwarf.dts
+++ b/src/arm/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git a/src/arm/nxp/imx/imx7d-pico.dtsi b/src/arm/nxp/imx/imx7d-pico.dtsi
index c5eefe8..8d5037a 100644
--- a/src/arm/nxp/imx/imx7d-pico.dtsi
+++ b/src/arm/nxp/imx/imx7d-pico.dtsi
@@ -108,6 +108,14 @@
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &ecspi3 {
 	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
diff --git a/src/arm/nxp/imx/imx7d-smegw01.dts b/src/arm/nxp/imx/imx7d-smegw01.dts
index 85b97b5..7ed27c7 100644
--- a/src/arm/nxp/imx/imx7d-smegw01.dts
+++ b/src/arm/nxp/imx/imx7d-smegw01.dts
@@ -149,7 +149,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 =<&pinctrl_i2c2>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	clock-frequency = <100000>;
 	status = "okay";
 
diff --git a/src/arm/nxp/imx/imx7d.dtsi b/src/arm/nxp/imx/imx7d.dtsi
index 4b94b8a..0484e34 100644
--- a/src/arm/nxp/imx/imx7d.dtsi
+++ b/src/arm/nxp/imx/imx7d.dtsi
@@ -217,9 +217,6 @@
 };
 
 &ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
diff --git a/src/arm/nxp/imx/imx7s.dtsi b/src/arm/nxp/imx/imx7s.dtsi
index 5387da8..9c81c6b 100644
--- a/src/arm/nxp/imx/imx7s.dtsi
+++ b/src/arm/nxp/imx/imx7s.dtsi
@@ -183,6 +183,15 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX7D_OCRAM_CLK>;
+		};
+
 		funnel@30041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x30041000 0x1000>;
@@ -190,7 +199,11 @@
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
@@ -605,6 +618,7 @@
 					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -720,6 +734,8 @@
 				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
 					<&clks IMX7D_ECSPI4_ROOT_CLK>;
 				clock-names = "ipg", "per";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
 				status = "disabled";
 			};
 
@@ -811,7 +827,7 @@
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
@@ -850,6 +866,26 @@
 					};
 				};
 			};
+
+			mipi_dsi: dsi@30760000 {
+				compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30760000 0x400>;
+				clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
+						  <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-rates = <0>, <333000000>;
+				power-domains = <&pgc_mipi_phy>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				samsung,burst-clock-frequency = <891000000>;
+				samsung,esc-clock-frequency = <20000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				status = "disabled";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -875,6 +911,8 @@
 					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
 						<&clks IMX7D_ECSPI1_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
 					status = "disabled";
 				};
 
@@ -887,6 +925,8 @@
 					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
 						<&clks IMX7D_ECSPI2_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
 					status = "disabled";
 				};
 
@@ -899,6 +939,8 @@
 					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
 						<&clks IMX7D_ECSPI3_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
 					status = "disabled";
 				};
 
@@ -1275,7 +1317,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm/nxp/imx/mba6ulx.dtsi b/src/arm/nxp/imx/mba6ulx.dtsi
index 5a8b867..e78d0a7 100644
--- a/src/arm/nxp/imx/mba6ulx.dtsi
+++ b/src/arm/nxp/imx/mba6ulx.dtsi
@@ -467,7 +467,7 @@
 
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
 		>;
 	};
diff --git a/src/arm/nxp/lpc/lpc18xx.dtsi b/src/arm/nxp/lpc/lpc18xx.dtsi
index 9cf09c1..6dd7329 100644
--- a/src/arm/nxp/lpc/lpc18xx.dtsi
+++ b/src/arm/nxp/lpc/lpc18xx.dtsi
@@ -74,7 +74,7 @@
 		sct_pwm: pwm@40000000 {
 			compatible = "nxp,lpc1850-sct-pwm";
 			reg = <0x40000000 0x1000>;
-			clocks =<&ccu1 CLK_CPU_SCT>;
+			clocks = <&ccu1 CLK_CPU_SCT>;
 			clock-names = "pwm";
 			resets = <&rgu 37>;
 			#pwm-cells = <3>;
diff --git a/src/arm/nxp/ls/ls1021a.dtsi b/src/arm/nxp/ls/ls1021a.dtsi
index 49c78c8..d471cc5 100644
--- a/src/arm/nxp/ls/ls1021a.dtsi
+++ b/src/arm/nxp/ls/ls1021a.dtsi
@@ -112,7 +112,7 @@
 			compatible = "fsl,ls1021a-msi";
 			reg = <0x0 0x1570e00 0x0 0x8>;
 			msi-controller;
-			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller@1570e08 {
diff --git a/src/arm/nxp/mxs/imx23-sansa.dts b/src/arm/nxp/mxs/imx23-sansa.dts
index 636cf09..b23e7ad 100644
--- a/src/arm/nxp/mxs/imx23-sansa.dts
+++ b/src/arm/nxp/mxs/imx23-sansa.dts
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git a/src/arm/nxp/mxs/imx23.dtsi b/src/arm/nxp/mxs/imx23.dtsi
index fdf18b7..0309592 100644
--- a/src/arm/nxp/mxs/imx23.dtsi
+++ b/src/arm/nxp/mxs/imx23.dtsi
@@ -110,7 +110,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
@@ -120,7 +120,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
@@ -130,7 +130,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
@@ -412,7 +412,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <7>, <5>, <9>, <26>,
@@ -484,7 +484,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx23-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
diff --git a/src/arm/nxp/mxs/imx28-lwe.dtsi b/src/arm/nxp/mxs/imx28-lwe.dtsi
index bb971e6..69fcb0d 100644
--- a/src/arm/nxp/mxs/imx28-lwe.dtsi
+++ b/src/arm/nxp/mxs/imx28-lwe.dtsi
@@ -18,6 +18,7 @@
 
 	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
 	};
 
 	reg_3v3: regulator-reg-3v3 {
diff --git a/src/arm/nxp/mxs/imx28-tx28.dts b/src/arm/nxp/mxs/imx28-tx28.dts
index 153e401..5485fe1 100644
--- a/src/arm/nxp/mxs/imx28-tx28.dts
+++ b/src/arm/nxp/mxs/imx28-tx28.dts
@@ -260,6 +260,7 @@
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&mclk>;
diff --git a/src/arm/nxp/mxs/imx28.dtsi b/src/arm/nxp/mxs/imx28.dtsi
index 6932d23..4817fba 100644
--- a/src/arm/nxp/mxs/imx28.dtsi
+++ b/src/arm/nxp/mxs/imx28.dtsi
@@ -164,7 +164,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
@@ -174,7 +174,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
@@ -184,7 +184,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
@@ -194,7 +194,7 @@
 				};
 
 				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
@@ -204,7 +204,7 @@
 				};
 
 				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
@@ -990,7 +990,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <78>, <79>, <66>, <0>,
@@ -1100,7 +1100,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx28-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
diff --git a/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi b/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi
index 14c411f..5a19da9 100644
--- a/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi
+++ b/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -55,7 +55,7 @@
 	brightness-levels = <0 4 8 16 32 64 128 255>;
 	default-brightness-level = <6>;
 	power-supply = <&reg_3v3>;
-	status  = "okay";
+	status = "okay";
 };
 
 &dcu0 {
diff --git a/src/arm/nxp/vf/vf610-bk4.dts b/src/arm/nxp/vf/vf610-bk4.dts
index e4f691d..722182f 100644
--- a/src/arm/nxp/vf/vf610-bk4.dts
+++ b/src/arm/nxp/vf/vf610-bk4.dts
@@ -68,7 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* PTD12 ->RPIO[91] */
-		sck-gpios  = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
 		/* PTD10 ->RPIO[89] */
 		miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <0>;
@@ -79,7 +79,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			/* PTB18 -> RGPIO[40] */
-			load-gpios  = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			spi-max-frequency = <100000>;
 		};
 	};
diff --git a/src/arm/nxp/vf/vf610-zii-cfu1.dts b/src/arm/nxp/vf/vf610-zii-cfu1.dts
index 1a19aec..7e72f86 100644
--- a/src/arm/nxp/vf/vf610-zii-cfu1.dts
+++ b/src/arm/nxp/vf/vf610-zii-cfu1.dts
@@ -162,7 +162,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6085";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -173,26 +173,26 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_fc_1000_1";
 					phy-mode = "1000base-x";
@@ -200,7 +200,7 @@
 					sfp = <&sff>;
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
diff --git a/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts b/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06..029f49b 100644
--- a/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -294,11 +294,11 @@
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		sck-gpios  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
-			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+			    &gpio1 8 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 
 		flash@0 {
@@ -338,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git a/src/arm/nxp/vf/vf610-zii-scu4-aib.dts b/src/arm/nxp/vf/vf610-zii-scu4-aib.dts
index df13354..77492ee 100644
--- a/src/arm/nxp/vf/vf610-zii-scu4-aib.dts
+++ b/src/arm/nxp/vf/vf610-zii-scu4-aib.dts
@@ -47,17 +47,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0: switch0@0 {
+			switch0: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
+					ethernet-port@0 {
 						reg = <0>;
 						phy-mode = "rmii";
 						ethernet = <&fec1>;
@@ -68,37 +68,37 @@
 						};
 					};
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "aib2main_1";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "aib2main_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_1000_5";
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_cu_1000_6";
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_cu_1000_4";
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_cu_1000_7";
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "modem_pic";
 
@@ -108,7 +108,7 @@
 						};
 					};
 
-					switch0port10: port@10 {
+					switch0port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -130,32 +130,32 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1: switch1@0 {
+			switch1: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "eth_cu_1000_3";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_cu_100_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_100_3";
 					};
 
-					switch1port9: port@9 {
+					switch1port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -168,7 +168,7 @@
 						};
 					};
 
-					switch1port10: port@10 {
+					switch1port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -188,17 +188,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2: switch2@0 {
+			switch2: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 2>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
 						phy-mode = "1000base-x";
@@ -206,7 +206,7 @@
 						sfp = <&sff1>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
 						phy-mode = "1000base-x";
@@ -214,7 +214,7 @@
 						sfp = <&sff2>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
 						phy-mode = "1000base-x";
@@ -222,7 +222,7 @@
 						sfp = <&sff3>;
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
 						phy-mode = "1000base-x";
@@ -230,7 +230,7 @@
 						sfp = <&sff4>;
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
 						phy-mode = "1000base-x";
@@ -238,7 +238,7 @@
 						sfp = <&sff5>;
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
 						phy-mode = "1000base-x";
@@ -246,7 +246,7 @@
 						sfp = <&sff6>;
 					};
 
-					port@9 {
+					ethernet-port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
 						phy-mode = "1000base-x";
@@ -254,7 +254,7 @@
 						sfp = <&sff0>;
 					};
 
-					switch2port10: port@10 {
+					switch2port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "2500base-x";
@@ -276,17 +276,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch3: switch3@0 {
+			switch3: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 3>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
 						phy-mode = "1000base-x";
@@ -294,7 +294,7 @@
 						sfp = <&sff7>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
 						phy-mode = "1000base-x";
@@ -302,7 +302,7 @@
 						sfp = <&sff8>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
 						phy-mode = "1000base-x";
@@ -310,7 +310,7 @@
 						sfp = <&sff9>;
 					};
 
-					switch3port9: port@9 {
+					switch3port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "2500base-x";
@@ -322,7 +322,7 @@
 						};
 					};
 
-					switch3port10: port@10 {
+					switch3port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
diff --git a/src/arm/nxp/vf/vf610-zii-spb4.dts b/src/arm/nxp/vf/vf610-zii-spb4.dts
index 1461804..2a49046 100644
--- a/src/arm/nxp/vf/vf610-zii-spb4.dts
+++ b/src/arm/nxp/vf/vf610-zii-spb4.dts
@@ -123,7 +123,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -134,11 +134,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -149,32 +149,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
diff --git a/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts b/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts
index 463c245..078d869 100644
--- a/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts
+++ b/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -112,7 +112,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -123,11 +123,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -138,27 +138,27 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_100_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@8 {
+				ethernet-port@8 {
 					reg = <8>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@9 {
+				ethernet-port@9 {
 					reg = <9>;
 					label = "eth_cu_1000_2";
 					phy-handle = <&phy9>;
@@ -167,12 +167,12 @@
 				};
 			};
 
-			mdio1 {
+			mdio-external {
 				compatible = "marvell,mv88e6xxx-mdio-external";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy9: phy9@0 {
+				phy9: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					pinctrl-0 = <&pinctrl_gpio_phy9>;
 					pinctrl-names = "default";
diff --git a/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts b/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts
index f5ae0d5..22c8f44 100644
--- a/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts
+++ b/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -137,7 +137,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -148,11 +148,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -163,32 +163,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
diff --git a/src/arm/qcom/pm8018.dtsi b/src/arm/qcom/pm8018.dtsi
new file mode 100644
index 0000000..22f3c7b
--- /dev/null
+++ b/src/arm/qcom/pm8018.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+	pm8018: pmic {
+		compatible = "qcom,pm8018", "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8018-pwrkey",
+				     "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8018_mpps: mpps@50 {
+			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8018_mpps 0 0 6>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8018_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8018_gpio 0 0 6>;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/src/arm/qcom/pm8058.dtsi b/src/arm/qcom/pm8058.dtsi
new file mode 100644
index 0000000..984b797
--- /dev/null
+++ b/src/arm/qcom/pm8058.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8058: pmic {
+		compatible = "qcom,pm8058";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8058-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8058_led48: led@48 {
+			compatible = "qcom,pm8058-keypad-led";
+			reg = <0x48>;
+			status = "disabled";
+		};
+
+		vibrator@4a {
+			compatible = "qcom,pm8058-vib";
+			reg = <0x4a>;
+		};
+
+		pm8058_mpps: mpps@50 {
+			compatible = "qcom,pm8058-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8058_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8058_led131: led@131 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x131>;
+			status = "disabled";
+		};
+
+		pm8058_led132: led@132 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x132>;
+			status = "disabled";
+		};
+
+		pm8058_led133: led@133 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x133>;
+			status = "disabled";
+		};
+
+		pm8058_keypad: keypad@148 {
+			compatible = "qcom,pm8058-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+		};
+
+		pm8058_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8058_gpio 0 0 44>;
+			#gpio-cells = <2>;
+		};
+
+		pm8058_xoadc: xoadc@197 {
+			compatible = "qcom,pm8058-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			ichg: adc-channel@3 {
+				reg = <0x00 0x03>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			ref_325mv: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+
+		rtc@1e8 {
+			compatible = "qcom,pm8058-rtc";
+			reg = <0x1e8>;
+			interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+	};
+};
diff --git a/src/arm/qcom/qcom-pm8226.dtsi b/src/arm/qcom/pm8226.dtsi
index 2413778..2fd4f13 100644
--- a/src/arm/qcom/qcom-pm8226.dtsi
+++ b/src/arm/qcom/pm8226.dtsi
@@ -82,6 +82,8 @@
 					  "usb-valid",
 					  "dc-valid";
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git a/src/arm/qcom/pm8821.dtsi b/src/arm/qcom/pm8821.dtsi
new file mode 100644
index 0000000..064e3ba
--- /dev/null
+++ b/src/arm/qcom/pm8821.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+	pm8821: pmic {
+		compatible = "qcom,pm8821";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8821_mpps: mpps@50 {
+			compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8821_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/src/arm/qcom/qcom-pm8841.dtsi b/src/arm/qcom/pm8841.dtsi
index 3bf2ce5..3bf2ce5 100644
--- a/src/arm/qcom/qcom-pm8841.dtsi
+++ b/src/arm/qcom/pm8841.dtsi
diff --git a/src/arm/qcom/pm8921.dtsi b/src/arm/qcom/pm8921.dtsi
new file mode 100644
index 0000000..058962a
--- /dev/null
+++ b/src/arm/qcom/pm8921.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8921: pmic {
+		compatible = "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8921_mpps: mpps@50 {
+			compatible = "qcom,pm8921-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8921_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8921_keypad: keypad@148 {
+			compatible = "qcom,pm8921-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+			status = "disabled";
+		};
+
+		pm8921_gpio: gpio@150 {
+
+			compatible = "qcom,pm8921-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8921_gpio 0 0 44>;
+			#gpio-cells = <2>;
+
+		};
+
+		pm8921_xoadc: xoadc@197 {
+			compatible = "qcom,pm8921-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			batt_therm: adc-channel@8 {
+				reg = <0x00 0x08>;
+			};
+
+			batt_id: adc-channel@9 {
+				reg = <0x00 0x09>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			chg_temp: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+};
diff --git a/src/arm/qcom/qcom-pm8941.dtsi b/src/arm/qcom/pm8941.dtsi
index ed0ba59..aca0052 100644
--- a/src/arm/qcom/qcom-pm8941.dtsi
+++ b/src/arm/qcom/pm8941.dtsi
@@ -99,6 +99,8 @@
 
 			usb-otg-in-supply = <&pm8941_5vs1>;
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git a/src/arm/qcom/qcom-pma8084.dtsi b/src/arm/qcom/pma8084.dtsi
index 2985f48..2985f48 100644
--- a/src/arm/qcom/qcom-pma8084.dtsi
+++ b/src/arm/qcom/pma8084.dtsi
diff --git a/src/arm/qcom/qcom-pmx55.dtsi b/src/arm/qcom/pmx55.dtsi
index da08511..da08511 100644
--- a/src/arm/qcom/qcom-pmx55.dtsi
+++ b/src/arm/qcom/pmx55.dtsi
diff --git a/src/arm/qcom/qcom-pmx65.dtsi b/src/arm/qcom/pmx65.dtsi
index 1c7fdf5..1c7fdf5 100644
--- a/src/arm/qcom/qcom-pmx65.dtsi
+++ b/src/arm/qcom/pmx65.dtsi
diff --git a/src/arm/qcom/qcom-apq8026-asus-sparrow.dts b/src/arm/qcom/qcom-apq8026-asus-sparrow.dts
index aa0e0e8..a2ca456 100644
--- a/src/arm/qcom/qcom-apq8026-asus-sparrow.dts
+++ b/src/arm/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
@@ -253,6 +253,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4400000>;
 	qcom,auto-recharge-threshold-voltage = <4300000>;
 	qcom,minimum-input-voltage = <4400000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts b/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts
index de19640..ac22896 100644
--- a/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ b/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 #include <dt-bindings/input/ti-drv260x.h>
 
 /delete-node/ &adsp_region;
@@ -335,6 +335,8 @@
 	qcom,fast-charge-current-limit = <300000>;
 	qcom,fast-charge-safe-current = <600000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-apq8026-lg-lenok.dts b/src/arm/qcom/qcom-apq8026-lg-lenok.dts
index b887e53..0a1fd5e 100644
--- a/src/arm/qcom/qcom-apq8026-lg-lenok.dts
+++ b/src/arm/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
@@ -292,6 +292,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index f516e04..cffc069 100644
--- a/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/input/input.h>
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 /delete-node/ &smem_region;
diff --git a/src/arm/qcom/qcom-apq8060-dragonboard.dts b/src/arm/qcom/qcom-apq8060-dragonboard.dts
index 569cbf0..009afd8 100644
--- a/src/arm/qcom/qcom-apq8060-dragonboard.dts
+++ b/src/arm/qcom/qcom-apq8060-dragonboard.dts
@@ -5,6 +5,7 @@
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm APQ8060 Dragonboard";
@@ -71,7 +72,7 @@
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -272,6 +273,10 @@
 	};
 };
 
+&pm8058 {
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8058_gpio {
 	dragon_ethernet_gpios: ethernet-state {
 		pinconf {
@@ -447,6 +452,8 @@
 	 * that means
 	 */
 	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+
 		vdd_l0-supply = <&pm8901_s4>;
 		vdd_l1-supply = <&vph>;
 		vdd_l2-supply = <&vph>;
@@ -464,57 +471,63 @@
 		lvs3_in-supply = <&pm8058_s2>;
 		mvs_in-supply = <&pm8058_s3>;
 
-		l0 {
+		pm8901_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8901_l1: l1 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8901_l2: l2 {
 			/* TMA340 requires strictly 3.3V */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8901_l3: l3 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8901_l4: l4 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8901_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8901_l6: l6 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
 
 		/* s0 and s1 are SAW regulators controlled over SPM */
-		s2 {
+		pm8901_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+		pm8901_s3: s3 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s4 {
+		pm8901_s4: s4 {
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -522,17 +535,22 @@
 		};
 
 		/* LVS0 thru 3 and mvs are just switches */
-		lvs0 {
+		pm8901_lvs0: lvs0 {
 			regulator-always-on;
 		};
-		lvs1 { };
-		lvs2 { };
-		lvs3 { };
-		mvs { };
 
+		pm8901_lvs1: lvs1 { };
+
+		pm8901_lvs2: lvs2 { };
+
+		pm8901_lvs3: lvs3 { };
+
+		pm8901_mvs: mvs { };
 	};
 
 	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+
 		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
 		vdd_l2_l11_l12-supply = <&vph>;
 		vdd_l3_l4_l5-supply = <&vph>;
@@ -554,144 +572,169 @@
 		vdd_s4-supply = <&vph>;
 		vdd_ncp-supply = <&vph>;
 
-		l0 {
+		pm8058_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8058_l1: l1 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8058_l2: l2 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8058_l3: l3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8058_l4: l4 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8058_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8058_l6: l6 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3600000>;
 			bias-pull-down;
 		};
-		l7 {
+
+		pm8058_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l8 {
+
+		pm8058_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <3050000>;
 			bias-pull-down;
 		};
-		l9 {
+
+		pm8058_l9: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l10 {
+
+		pm8058_l10: l10 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l11 {
+
+		pm8058_l11: l11 {
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			bias-pull-down;
 		};
-		l12 {
+
+		pm8058_l12: l12 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
-		l13 {
+
+		pm8058_l13: l13 {
 			regulator-min-microvolt = <2050000>;
 			regulator-max-microvolt = <2050000>;
 			bias-pull-down;
 		};
-		l14 {
+
+		pm8058_l14: l14 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
-		l15 {
+
+		pm8058_l15: l15 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l16 {
+
+		pm8058_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l17 {
+
+		pm8058_l17: l17 {
 			// 1.5V according to schematic
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l18 {
+
+		pm8058_l18: l18 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
-		l19 {
+
+		pm8058_l19: l19 {
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			bias-pull-down;
 		};
-		l20 {
+
+		pm8058_l20: l20 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l21 {
+
+		pm8058_l21: l21 {
 			// 1.1 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l22 {
+
+		pm8058_l22: l22 {
 			// 1.2 V according to schematic
 			regulator-min-microvolt = <1150000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
-		l23 {
+
+		pm8058_l23: l23 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l24 {
+
+		pm8058_l24: l24 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l25 {
+
+		pm8058_l25: l25 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		s0 {
+		pm8058_s0: s0 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1325000>;
 			regulator-min-microvolt = <1100000>;
@@ -699,7 +742,8 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s1 {
+
+		pm8058_s1: s1 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1250000>;
 			regulator-min-microvolt = <1100000>;
@@ -707,21 +751,24 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s2 {
+
+		pm8058_s2: s2 {
 			// 1.3 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+
+		pm8058_s3: s3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
-		s4 {
+
+		pm8058_s4: s4 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -730,14 +777,15 @@
 		};
 
 		/* LVS0 and LVS1 are just switches */
-		lvs0 {
+		pm8058_lvs0: lvs0 {
 			bias-pull-down;
 		};
-		lvs1 {
+
+		pm8058_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		ncp {
+		pm8058_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -944,28 +992,32 @@
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 
 	/* Board-specific channels */
-	mpp5@5 {
+	adc-channel@5 {
 		/* Connected to AOUT of ALS sensor */
 		reg = <0x00 0x05>;
 	};
-	mpp6@6 {
+
+	adc-channel@6 {
 		/* Connected to test point TP43 */
 		reg = <0x00 0x06>;
 	};
-	mpp7@7 {
+
+	adc-channel@7 {
 		/* Connected to battery thermistor */
 		reg = <0x00 0x07>;
 	};
-	mpp8@8 {
+
+	adc-channel@8 {
 		/* Connected to battery ID detector */
 		reg = <0x00 0x08>;
 	};
-	mpp9@9 {
+
+	adc-channel@9 {
 		/* Connected to XO thermistor */
 		reg = <0x00 0x09>;
 	};
diff --git a/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts b/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts
index c0dd639..d460743 100644
--- a/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -1,8 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
@@ -180,24 +184,26 @@
 	status = "okay";
 };
 
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
 &mdp_dsi1_out {
 	remote-endpoint = <&dsi0_in>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
 
-
 		vdd_l24-supply = <&pm8921_s1>;
 		vdd_l25-supply = <&pm8921_s1>;
 		vin_lvs2-supply = <&pm8921_s1>;
@@ -209,7 +215,7 @@
 		vdd_ncp-supply = <&pm8921_l6>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -218,7 +224,7 @@
 		};
 
 		/* msm otg HSUSB_VDDCX */
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
@@ -231,55 +237,58 @@
 		 * tabla2x-slim-CDC_VDD_CP
 		 * tabla2x-slim-VDDIO_CDC
 		 */
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 			regulator-always-on;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
 		/* mipi_dsi.1-dsi1_pll_vdda */
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-always-on;
 		};
 
 		/* msm_otg-HSUSB_3p3 */
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
 		/* msm_otg-HSUSB_1p8 */
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
 		/* msm_sdcc.1-sdc_vdd */
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 		};
 
+		pm8921_l8: l8 {
+		};
+
 		/* mipi_dsi.1-dsi1_avdd */
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
@@ -287,14 +296,14 @@
 		};
 
 		/* pwm_power for backlight */
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			regulator-always-on;
 		};
 
 		/* camera, qdsp6 */
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
@@ -304,37 +313,44 @@
 		 * tabla2x-slim-CDC_VDDA_A_1P2V
 		 * tabla2x-slim-VDDD_CDC_D
 		 */
-		l25 {
+		pm8921_l25: l25 {
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 		/*
 		 * mipi_dsi.1-dsi1_vddio
 		 * pil_riva-pll_vdd
 		 */
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 	};
 };
 
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
 &usb_hs1_phy {
 	v3p3-supply = <&pm8921_l3>;
 	v1p8-supply = <&pm8921_l4>;
diff --git a/src/arm/qcom/qcom-apq8064-cm-qs600.dts b/src/arm/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8..671d58c 100644
--- a/src/arm/qcom/qcom-apq8064-cm-qs600.dts
+++ b/src/arm/qcom/qcom-apq8064-cm-qs600.dts
@@ -1,8 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "CompuLab CM-QS600";
 	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
@@ -69,6 +72,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -82,6 +93,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -93,9 +106,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -103,52 +115,51 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
-
 	};
 };
 
diff --git a/src/arm/qcom/qcom-apq8064-ifc6410.dts b/src/arm/qcom/qcom-apq8064-ifc6410.dts
index b0c5e7b..ed86b24 100644
--- a/src/arm/qcom/qcom-apq8064-ifc6410.dts
+++ b/src/arm/qcom/qcom-apq8064-ifc6410.dts
@@ -1,9 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Qualcomm APQ8064/IFC6410";
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
@@ -170,6 +173,14 @@
 	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -192,6 +203,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -203,9 +216,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -213,59 +225,63 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_hdmi_switch: hdmi-switch {
 			bias-pull-down;
 		};
 	};
diff --git a/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512..2412aa3 100644
--- a/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Sony Xperia Z";
 	compatible = "sony,xperia-yuga", "qcom,apq8064";
@@ -65,6 +68,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio3", "gpio4", "gpio29", "gpio35";
@@ -82,11 +93,25 @@
 &riva {
 	pinctrl-names = "default";
 	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
 	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
 };
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs_1_3_6-supply = <&pm8921_s4>;
 		vin_lvs_4_5_7-supply = <&pm8921_s4>;
@@ -98,7 +123,7 @@
 		vin_l28-supply = <&pm8921_s7>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -106,21 +131,21 @@
 			bias-pull-down;
 		};
 
-		s2 {
+		pm8921_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
 			bias-pull-down;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -129,205 +154,207 @@
 			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s8 {
+		pm8921_s8: s8 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
 		};
 
 		/* PMOS LDO */
-		l1 {
+		pm8921_l1: l1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			bias-pull-down;
 		};
 
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l7 {
+		pm8921_l7: l7 {
 			regulator-min-microvolt = <1850000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l8 {
+		pm8921_l8: l8 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l9 {
+		pm8921_l9: l9 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l10 {
+		pm8921_l10: l10 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
 
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l12 {
+		pm8921_l12: l12 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l14 {
+		pm8921_l14: l14 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l15 {
+		pm8921_l15: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l16 {
+		pm8921_l16: l16 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
-		l18 {
+		pm8921_l18: l18 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l21 {
+		pm8921_l21: l21 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l22 {
+		pm8921_l22: l22 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l24 {
+		pm8921_l24: l24 {
 			regulator-min-microvolt = <750000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
 
-		l25 {
+		pm8921_l25: l25 {
 			regulator-always-on;
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		l27 {
+		pm8921_l27: l27 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 		};
 
-		l28 {
+		pm8921_l28: l28 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l29 {
+		pm8921_l29: l29 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
 		/* Low Voltage Switch */
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs2 {
+		pm8921_lvs2: lvs2 {
 			bias-pull-down;
 		};
 
-		lvs3 {
+		pm8921_lvs3: lvs3 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 
-		usb-switch {};
+		pm8921_usb_switch: usb-switch {};
 
-		hdmi-switch {};
+		pm8921_hdmi_switch: hdmi-switch {
+			bias-pull-down;
+		};
 
-		ncp {
+		pm8921_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
diff --git a/src/arm/qcom/qcom-apq8064.dtsi b/src/arm/qcom/qcom-apq8064.dtsi
index 59fd86b..3faf570 100644
--- a/src/arm/qcom/qcom-apq8064.dtsi
+++ b/src/arm/qcom/qcom-apq8064.dtsi
@@ -284,23 +284,6 @@
 		};
 	};
 
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -655,133 +638,16 @@
 			clock-names = "core";
 		};
 
-		ssbi@c00000 {
+		ssbi2: ssbi@c00000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8821: pmic {
-				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8821_mpps: mpps@50 {
-					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
-					reg = <0x50>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8821_mpps 0 0 4>;
-				};
-			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8921_gpio: gpio@150 {
-
-					compatible = "qcom,pm8921-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8921_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8921_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8921-adc";
-					reg = <197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					batt_therm: adc-channel@8 {
-						reg = <0x00 0x08>;
-					};
-					batt_id: adc-channel@9 {
-						reg = <0x00 0x09>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					chg_temp: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-			};
 		};
 
 		qfprom: qfprom@700000 {
@@ -891,60 +757,6 @@
 				clocks = <&pxo_board>, <&cxo_board>;
 				clock-names = "pxo", "cxo";
 			};
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-
-				pm8921_s1: s1 {};
-				pm8921_s2: s2 {};
-				pm8921_s3: s3 {};
-				pm8921_s4: s4 {};
-				pm8921_s7: s7 {};
-				pm8921_s8: s8 {};
-
-				pm8921_l1: l1 {};
-				pm8921_l2: l2 {};
-				pm8921_l3: l3 {};
-				pm8921_l4: l4 {};
-				pm8921_l5: l5 {};
-				pm8921_l6: l6 {};
-				pm8921_l7: l7 {};
-				pm8921_l8: l8 {};
-				pm8921_l9: l9 {};
-				pm8921_l10: l10 {};
-				pm8921_l11: l11 {};
-				pm8921_l12: l12 {};
-				pm8921_l14: l14 {};
-				pm8921_l15: l15 {};
-				pm8921_l16: l16 {};
-				pm8921_l17: l17 {};
-				pm8921_l18: l18 {};
-				pm8921_l21: l21 {};
-				pm8921_l22: l22 {};
-				pm8921_l23: l23 {};
-				pm8921_l24: l24 {};
-				pm8921_l25: l25 {};
-				pm8921_l26: l26 {};
-				pm8921_l27: l27 {};
-				pm8921_l28: l28 {};
-				pm8921_l29: l29 {};
-
-				pm8921_lvs1: lvs1 {};
-				pm8921_lvs2: lvs2 {};
-				pm8921_lvs3: lvs3 {};
-				pm8921_lvs4: lvs4 {};
-				pm8921_lvs5: lvs5 {};
-				pm8921_lvs6: lvs6 {};
-				pm8921_lvs7: lvs7 {};
-
-				pm8921_usb_switch: usb-switch {};
-
-				pm8921_hdmi_switch: hdmi-switch {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {};
-			};
 		};
 
 		usb1: usb@12500000 {
@@ -1472,7 +1284,7 @@
 			qcom,ncb = <3>;
 		};
 
-		pcie: pci@1b500000 {
+		pcie: pcie@1b500000 {
 			compatible = "qcom,pcie-apq8064";
 			reg = <0x1b500000 0x1000>,
 			      <0x1b502000 0x80>,
@@ -1623,10 +1435,6 @@
 
 			memory-region = <&wcnss_mem>;
 
-			vddcx-supply = <&pm8921_s3>;
-			vddmx-supply = <&pm8921_l24>;
-			vddpx-supply = <&pm8921_s4>;
-
 			status = "disabled";
 
 			iris {
@@ -1634,11 +1442,6 @@
 
 				clocks = <&cxo_board>;
 				clock-names = "xo";
-
-				vddxo-supply = <&pm8921_l4>;
-				vddrfa-supply = <&pm8921_s2>;
-				vddpa-supply = <&pm8921_l10>;
-				vdddig-supply = <&pm8921_lvs2>;
 			};
 
 			smd-edge {
diff --git a/src/arm/qcom/qcom-apq8074-dragonboard.dts b/src/arm/qcom/qcom-apq8074-dragonboard.dts
index 6d1b243..6fce011 100644
--- a/src/arm/qcom/qcom-apq8074-dragonboard.dts
+++ b/src/arm/qcom/qcom-apq8074-dragonboard.dts
@@ -4,8 +4,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 
 /delete-node/ &mpss_region;
 
@@ -49,6 +49,33 @@
 			no-map;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_uart2 {
@@ -403,6 +430,10 @@
 	pinctrl-1 = <&sdc2_off>;
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	sdc1_on: sdc1-on-state {
 		clk-pins {
diff --git a/src/arm/qcom/qcom-apq8084-ifc6540.dts b/src/arm/qcom/qcom-apq8084-ifc6540.dts
index 116e59a..1df24c9 100644
--- a/src/arm/qcom/qcom-apq8084-ifc6540.dts
+++ b/src/arm/qcom/qcom-apq8084-ifc6540.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
diff --git a/src/arm/qcom/qcom-apq8084-mtp.dts b/src/arm/qcom/qcom-apq8084-mtp.dts
index c6b6680..d4e6aee 100644
--- a/src/arm/qcom/qcom-apq8084-mtp.dts
+++ b/src/arm/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ 8084-MTP";
diff --git a/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 468ebc4..374af6d 100644
--- a/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -98,7 +98,7 @@
 			};
 		};
 
-		pci@40000000 {
+		pcie@40000000 {
 			status = "okay";
 			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
diff --git a/src/arm/qcom/qcom-ipq4019.dtsi b/src/arm/qcom/qcom-ipq4019.dtsi
index 9844e0b..f989bd7 100644
--- a/src/arm/qcom/qcom-ipq4019.dtsi
+++ b/src/arm/qcom/qcom-ipq4019.dtsi
@@ -224,7 +224,7 @@
 		};
 
 		sdhci: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,7 +417,7 @@
 			reg = <0x4ab000 0x4>;
 		};
 
-		pcie0: pci@40000000 {
+		pcie0: pcie@40000000 {
 			compatible = "qcom,pcie-ipq4019";
 			reg = <0x40000000 0xf1d>,
 			      <0x40000f20 0xa8>,
diff --git a/src/arm/qcom/qcom-ipq8064.dtsi b/src/arm/qcom/qcom-ipq8064.dtsi
index 6198f42..6a7f4dd 100644
--- a/src/arm/qcom/qcom-ipq8064.dtsi
+++ b/src/arm/qcom/qcom-ipq8064.dtsi
@@ -366,7 +366,7 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
@@ -1076,7 +1076,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@1b500000 {
+		pcie0: pcie@1b500000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b500000 0x1000
 			       0x1b502000 0x80
@@ -1127,7 +1127,7 @@
 			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie1: pci@1b700000 {
+		pcie1: pcie@1b700000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b700000 0x1000
 			       0x1b702000 0x80
@@ -1178,7 +1178,7 @@
 			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie2: pci@1b900000 {
+		pcie2: pcie@1b900000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b900000 0x1000
 			       0x1b902000 0x80
diff --git a/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
index b269fdc..e3b4b93 100644
--- a/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -6,11 +6,11 @@
  * Author : Neil Armstrong <narmstrong@baylibre.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 #include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "MangOH Green with WP8548 Module";
diff --git a/src/arm/qcom/qcom-mdm9615-wp8548.dtsi b/src/arm/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003..0dd52ca 100644
--- a/src/arm/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/src/arm/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
 
 / {
 	model = "Sierra Wireless WP8548 Module";
@@ -76,7 +77,11 @@
 	};
 };
 
-&pmicgpio {
+&pm8018 {
+	interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
@@ -129,6 +134,142 @@
 	pinctrl-names = "default";
 };
 
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8018-regulators";
+
+		vin_lvs1-supply = <&pm8018_s3>;
+
+		vdd_l7-supply = <&pm8018_s4>;
+		vdd_l8-supply = <&pm8018_s3>;
+		vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+		/* Buck SMPS */
+		pm8018_s1: s1 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s2: s2 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s3: s3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s4: s4 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s5: s5 {
+			regulator-always-on;
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8018_l2: l2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l3: l3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l4: l4 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8018_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8018_l8: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8018_l9: l9 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8018_l10: l10 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l11: l11 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l13: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8018_l14: l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8018_lvs1: lvs1 {
+			bias-pull-down;
+		};
+	};
+};
+
 &sdcc1 {
 	status = "okay";
 };
diff --git a/src/arm/qcom/qcom-mdm9615.dtsi b/src/arm/qcom/qcom-mdm9615.dtsi
index 63e21aa2..34c6099 100644
--- a/src/arm/qcom/qcom-mdm9615.dtsi
+++ b/src/arm/qcom/qcom-mdm9615.dtsi
@@ -256,57 +256,10 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8018", "qcom,pm8921";
-				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pmicmpp: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pmicgpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
-			};
 		};
 
 		sdcc1bam: dma-controller@12182000 {
@@ -383,140 +336,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8018-regulators";
-
-				vin_lvs1-supply = <&pm8018_s3>;
-
-				vdd_l7-supply = <&pm8018_s4>;
-				vdd_l8-supply = <&pm8018_s3>;
-				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
-				/* Buck SMPS */
-				pm8018_s1: s1 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s2: s2 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s3: s3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s4: s4 {
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s5: s5 {
-					regulator-always-on;
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8018_l2: l2 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l3: l3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l4: l4 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				pm8018_l5: l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l6: l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l7: l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8018_l8: l8 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8018_l9: l9 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8018_l10: l10 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l11: l11 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l12: l12 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l13: l13 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8018_l14: l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8018_lvs1: lvs1 {
-					bias-pull-down;
-				};
-			};
 		};
 	};
 };
diff --git a/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi b/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi
new file mode 100644
index 0000000..525d8c6
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for Microsoft MSM8x26-based Lumias
+ *
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/input/input.h>
+
+/*
+ * Delete all generic (msm8226.dtsi) reserved
+ * memory mappings which are different on these devices.
+ */
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* microSD */
+		display0 = &framebuffer;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x3200000 0x800000>;
+			format = "a8r8g8b8";
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 4)>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	/*
+	 * This device being a WP platform has a different
+	 * memory layout than other Android based devices.
+	 * This smem memory region is directly copied from
+	 * the original UEFI firmware.
+	 */
+	reserved-memory {
+		display_reserved: framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		/* These values were taken from the original firmware DSDT */
+		pm8226_s1: s1 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2075000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio106", "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git a/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts b/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts
new file mode 100644
index 0000000..2c664b5
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640";
+	compatible = "microsoft,dempsey", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts b/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts
new file mode 100644
index 0000000..731c5c3
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640 XL";
+	compatible = "microsoft,makepeace", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts b/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts
new file mode 100644
index 0000000..992b711
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Nokia Lumia 630";
+	compatible = "microsoft,moneypenny", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <480>;
+	height = <854>;
+	stride = <(480 * 4)>;
+};
diff --git a/src/arm/qcom/qcom-msm8226.dtsi b/src/arm/qcom/qcom-msm8226.dtsi
index 97a377b..b492c95 100644
--- a/src/arm/qcom/qcom-msm8226.dtsi
+++ b/src/arm/qcom/qcom-msm8226.dtsi
@@ -442,8 +442,8 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
 			clock-names = "xo",
 				      "mmss_gpll0_vote",
 				      "gpll0_vote",
@@ -875,8 +875,8 @@
 				offset = <0x65c>;
 
 				mode-bootloader = <0x77665500>;
-				mode-normal     = <0x77665501>;
-				mode-recovery   = <0x77665502>;
+				mode-normal = <0x77665501>;
+				mode-recovery = <0x77665502>;
 			};
 		};
 
@@ -1006,6 +1006,46 @@
 					      "ref";
 			};
 		};
+
+		gpu: adreno@fdb00000 {
+			compatible = "qcom,adreno-305.18", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-19000000 {
+					opp-hz = /bits/ 64 <19000000>;
+				};
+			};
+		};
 	};
 
 	thermal-zones {
diff --git a/src/arm/qcom/qcom-msm8660-surf.dts b/src/arm/qcom/qcom-msm8660-surf.dts
index be18f1b..69fe651 100644
--- a/src/arm/qcom/qcom-msm8660-surf.dts
+++ b/src/arm/qcom/qcom-msm8660-surf.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm MSM8660 SURF";
@@ -35,30 +36,42 @@
 };
 
 &pm8058 {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_FN_F1)
-			MATRIX_KEY(0, 1, KEY_UP)
-			MATRIX_KEY(0, 2, KEY_LEFT)
-			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
-			MATRIX_KEY(1, 0, KEY_FN_F2)
-			MATRIX_KEY(1, 1, KEY_RIGHT)
-			MATRIX_KEY(1, 2, KEY_DOWN)
-			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
-			MATRIX_KEY(2, 3, KEY_ENTER)
-			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(4, 1, KEY_UP)
-			MATRIX_KEY(4, 2, KEY_LEFT)
-			MATRIX_KEY(4, 3, KEY_HOME)
-			MATRIX_KEY(4, 4, KEY_FN_F3)
-			MATRIX_KEY(5, 0, KEY_CAMERA)
-			MATRIX_KEY(5, 1, KEY_RIGHT)
-			MATRIX_KEY(5, 2, KEY_DOWN)
-			MATRIX_KEY(5, 3, KEY_BACK)
-			MATRIX_KEY(5, 4, KEY_MENU)
-			>;
-		keypad,num-rows = <6>;
-		keypad,num-columns = <5>;
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_FN_F1)
+		MATRIX_KEY(0, 1, KEY_UP)
+		MATRIX_KEY(0, 2, KEY_LEFT)
+		MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(1, 0, KEY_FN_F2)
+		MATRIX_KEY(1, 1, KEY_RIGHT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+		MATRIX_KEY(2, 3, KEY_ENTER)
+		MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(4, 1, KEY_UP)
+		MATRIX_KEY(4, 2, KEY_LEFT)
+		MATRIX_KEY(4, 3, KEY_HOME)
+		MATRIX_KEY(4, 4, KEY_FN_F3)
+		MATRIX_KEY(5, 0, KEY_CAMERA)
+		MATRIX_KEY(5, 1, KEY_RIGHT)
+		MATRIX_KEY(5, 2, KEY_DOWN)
+		MATRIX_KEY(5, 3, KEY_BACK)
+		MATRIX_KEY(5, 4, KEY_MENU)
+		>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
+
+&rpm {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
 	};
 };
 
diff --git a/src/arm/qcom/qcom-msm8660.dtsi b/src/arm/qcom/qcom-msm8660.dtsi
index 78023ed..a7c245b 100644
--- a/src/arm/qcom/qcom-msm8660.dtsi
+++ b/src/arm/qcom/qcom-msm8660.dtsi
@@ -73,22 +73,6 @@
 		};
 	};
 
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -334,143 +318,10 @@
 			status = "disabled";
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8058: pmic {
-				compatible = "qcom,pm8058";
-				interrupt-parent = <&tlmm>;
-				interrupts = <88 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8058_gpio: gpio@150 {
-					compatible = "qcom,pm8058-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8058_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8058_mpps: mpps@50 {
-					compatible = "qcom,pm8058-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8058_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8058-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8058_keypad: keypad@148 {
-					compatible = "qcom,pm8058-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <74 1>, <75 1>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8058-adc";
-					reg = <0x197>;
-					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					ichg: adc-channel@3 {
-						reg = <0x00 0x03>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					ref_325mv: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-
-				rtc@1e8 {
-					compatible = "qcom,pm8058-rtc";
-					reg = <0x1e8>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <39 1>;
-					allow-set-time;
-				};
-
-				vibrator@4a {
-					compatible = "qcom,pm8058-vib";
-					reg = <0x4a>;
-				};
-
-				pm8058_led48: led@48 {
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					status = "disabled";
-				};
-
-				pm8058_led131: led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					status = "disabled";
-				};
-
-				pm8058_led132: led@132 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					status = "disabled";
-				};
-
-				pm8058_led133: led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					status = "disabled";
-				};
-
-			};
 		};
 
 		l2cc: clock-controller@2082000 {
@@ -496,72 +347,6 @@
 				clocks = <&pxo_board>;
 				clock-names = "pxo";
 			};
-
-			regulators-0 {
-				compatible = "qcom,rpm-pm8901-regulators";
-
-				pm8901_l0: l0 {};
-				pm8901_l1: l1 {};
-				pm8901_l2: l2 {};
-				pm8901_l3: l3 {};
-				pm8901_l4: l4 {};
-				pm8901_l5: l5 {};
-				pm8901_l6: l6 {};
-
-				/* S0 and S1 Handled as SAW regulators by SPM */
-				pm8901_s2: s2 {};
-				pm8901_s3: s3 {};
-				pm8901_s4: s4 {};
-
-				pm8901_lvs0: lvs0 {};
-				pm8901_lvs1: lvs1 {};
-				pm8901_lvs2: lvs2 {};
-				pm8901_lvs3: lvs3 {};
-
-				pm8901_mvs: mvs {};
-			};
-
-			regulators-1 {
-				compatible = "qcom,rpm-pm8058-regulators";
-
-				pm8058_l0: l0 {};
-				pm8058_l1: l1 {};
-				pm8058_l2: l2 {};
-				pm8058_l3: l3 {};
-				pm8058_l4: l4 {};
-				pm8058_l5: l5 {};
-				pm8058_l6: l6 {};
-				pm8058_l7: l7 {};
-				pm8058_l8: l8 {};
-				pm8058_l9: l9 {};
-				pm8058_l10: l10 {};
-				pm8058_l11: l11 {};
-				pm8058_l12: l12 {};
-				pm8058_l13: l13 {};
-				pm8058_l14: l14 {};
-				pm8058_l15: l15 {};
-				pm8058_l16: l16 {};
-				pm8058_l17: l17 {};
-				pm8058_l18: l18 {};
-				pm8058_l19: l19 {};
-				pm8058_l20: l20 {};
-				pm8058_l21: l21 {};
-				pm8058_l22: l22 {};
-				pm8058_l23: l23 {};
-				pm8058_l24: l24 {};
-				pm8058_l25: l25 {};
-
-				pm8058_s0: s0 {};
-				pm8058_s1: s1 {};
-				pm8058_s2: s2 {};
-				pm8058_s3: s3 {};
-				pm8058_s4: s4 {};
-
-				pm8058_lvs0: lvs0 {};
-				pm8058_lvs1: lvs1 {};
-
-				pm8058_ncp: ncp {};
-			};
 		};
 
 		amba {
diff --git a/src/arm/qcom/qcom-msm8926-htc-memul.dts b/src/arm/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 0000000..ed328b2
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "HTC One Mini 2";
+	compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		unknown@5b00000 {
+			reg = <0x05b00000 0x200000>;
+			no-map;
+		};
+
+		unknown@7500000 {
+			reg = <0x07500000 0xb00000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x4f00000>;
+			no-map;
+		};
+
+		unknown@cf00000 {
+			reg = <0x0cf00000 0x200000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x3a000>;
+			no-map;
+		};
+
+		unknown@d13a000 {
+			reg = <0x0d13a000 0xc6000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0x650000>;
+			no-map;
+		};
+
+		unknown@d850000 {
+			reg = <0x0d850000 0x3b0000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1400000>;
+			no-map;
+		};
+
+		unknown@f000000 {
+			reg = <0x0f000000 0x500000>;
+			no-map;
+		};
+
+		venus_region: venus@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		unknown@fb00000 {
+			reg = <0x0fb00000 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/msm8926/memul/adsp.mbn";
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0x0d>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_l28>;
+	};
+
+	accelerometer@18 {
+		compatible = "bosch,bma250e";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_l28>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* TFA9887 @ 34 */
+	/* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	/* NCP6924 Camera Regulators @ 10 */
+	/* PN544 NFC @ 28 */
+	/* TPS61310 Flash/Torch @ 33 */
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1750000>;
+	qcom,fast-charge-current-limit = <1750000>;
+	qcom,fast-charge-safe-voltage = <4360000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts b/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts
new file mode 100644
index 0000000..9b48661
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c3 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 735";
+	compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
diff --git a/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts b/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts
new file mode 100644
index 0000000..53a6d4e
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c1 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 830";
+	compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
+
+&gpio_keys {
+	key-camera-snapshot {
+		label = "Camera Snapshot";
+		gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key-camera-focus {
+		label = "Camera Focus";
+		gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+};
diff --git a/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts b/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 0000000..0cbe2d2
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G 4G (2013)";
+	compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			/* Pull-up for I2C lines */
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/src/arm/qcom/qcom-msm8960-cdp.dts b/src/arm/qcom/qcom-msm8960-cdp.dts
index 6c1bc38..36f4c99 100644
--- a/src/arm/qcom/qcom-msm8960-cdp.dts
+++ b/src/arm/qcom/qcom-msm8960-cdp.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
 
 / {
 	model = "Qualcomm MSM8960 CDP";
@@ -88,17 +89,21 @@
 	};
 };
 
-&pmicintc {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(0, 3, KEY_CAMERA)
-			>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <5>;
-	};
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(0, 3, KEY_CAMERA)
+		>;
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
 };
 
 &rpm {
diff --git a/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts b/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c2..1a51163 100644
--- a/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
 
 #include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
 
 / {
 	model = "Samsung Galaxy Express SGH-I437";
@@ -84,6 +85,10 @@
 	};
 };
 
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
 		compatible = "qcom,rpm-pm8921-regulators";
diff --git a/src/arm/qcom/qcom-msm8960.dtsi b/src/arm/qcom/qcom-msm8960.dtsi
index d13080f..f420740 100644
--- a/src/arm/qcom/qcom-msm8960.dtsi
+++ b/src/arm/qcom/qcom-msm8960.dtsi
@@ -200,10 +200,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-			};
 		};
 
 		acc0: clock-controller@2088000 {
@@ -259,49 +255,10 @@
 			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&msmgpio>;
-				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				keypad@148 {
-					compatible = "qcom,pm8921-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
-						     <75 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-			};
 		};
 
 		rng@1a500000 {
diff --git a/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfdd..4aaae85 100644
--- a/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -60,6 +60,33 @@
 		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -340,6 +367,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -347,6 +375,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
diff --git a/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 68a2f90..d34659e 100644
--- a/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -65,6 +65,33 @@
 			pmsg-size = <0x80000>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -190,6 +217,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -197,6 +225,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -425,6 +454,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-msm8974.dtsi b/src/arm/qcom/qcom-msm8974.dtsi
index 0bc2e66..b141398 100644
--- a/src/arm/qcom/qcom-msm8974.dtsi
+++ b/src/arm/qcom/qcom-msm8974.dtsi
@@ -346,6 +346,20 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -405,52 +419,46 @@
 			};
 		};
 
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
 		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -1063,6 +1071,15 @@
 			};
 		};
 
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8974";
 			#clock-cells = <1>;
@@ -1101,22 +1118,13 @@
 			};
 		};
 
-		bimc: interconnect@fc380000 {
-			reg = <0xfc380000 0x6a000>;
-			compatible = "qcom,msm8974-bimc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
 		snoc: interconnect@fc460000 {
 			reg = <0xfc460000 0x4000>;
 			compatible = "qcom,msm8974-snoc";
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		pnoc: interconnect@fc468000 {
@@ -1125,7 +1133,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		ocmemnoc: interconnect@fc470000 {
@@ -1134,7 +1142,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+				 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
 		};
 
 		mmssnoc: interconnect@fc478000 {
@@ -1143,7 +1151,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&mmcc MMSS_S0_AXI_CLK>,
-			         <&mmcc MMSS_S0_AXI_CLK>;
+				 <&mmcc MMSS_S0_AXI_CLK>;
 		};
 
 		cnoc: interconnect@fc480000 {
@@ -1152,7 +1160,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@fc4a9000 {
@@ -1633,13 +1641,6 @@
 					bias-pull-up;
 					drive-strength = <2>;
 				};
-
-				cd-pins {
-					pins = "gpio54";
-					function = "gpio";
-					bias-disable;
-					drive-strength = <2>;
-				};
 			};
 
 			blsp1_uart2_default: blsp1-uart2-default-state {
@@ -2408,31 +2409,4 @@
 			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
 };
diff --git a/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts b/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 42d253b..fe227fd 100644
--- a/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ b/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -57,6 +57,33 @@
 		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&pm8941_l18>;
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -381,6 +408,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts b/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 8230d0e..4c8edad 100644
--- a/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
@@ -51,6 +51,33 @@
 			debounce-interval = <150>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c1 {
@@ -433,6 +460,10 @@
 	status = "okay";
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio68";
diff --git a/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts b/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
index 3e2c865..b93539e 100644
--- a/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/leds/common.h>
@@ -155,7 +155,15 @@
 		enable-active-high;
 	};
 
-	/delete-node/ vreg-boost;
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -355,7 +363,6 @@
 		vddr-supply = <&vreg_panel>;
 
 		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
 		port {
 			panel_in: endpoint {
diff --git a/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 11468d1..ee94741 100644
--- a/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -84,6 +84,33 @@
 		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -297,6 +324,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -304,6 +332,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -558,6 +587,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-sdx55-mtp.dts b/src/arm/qcom/qcom-sdx55-mtp.dts
index 7e97ad5..2470693 100644
--- a/src/arm/qcom/qcom-sdx55-mtp.dts
+++ b/src/arm/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
 #include "qcom-sdx55.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX55 MTP";
diff --git a/src/arm/qcom/qcom-sdx55-t55.dts b/src/arm/qcom/qcom-sdx55-t55.dts
index 51058b0..082f7ed 100644
--- a/src/arm/qcom/qcom-sdx55-t55.dts
+++ b/src/arm/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Thundercomm T55 Development Kit";
diff --git a/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts b/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts
index 8fadc6e..e336a15 100644
--- a/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts
+++ b/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Telit FN980 TLB";
diff --git a/src/arm/qcom/qcom-sdx55.dtsi b/src/arm/qcom/qcom-sdx55.dtsi
index 2aa5089..27429d0 100644
--- a/src/arm/qcom/qcom-sdx55.dtsi
+++ b/src/arm/qcom/qcom-sdx55.dtsi
@@ -228,31 +228,26 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6200 0x170>,
-				      <0x00ff6400 0x200>,
-				      <0x00ff6800 0x800>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
 		};
 
 		mc_virt: interconnect@1100000 {
@@ -345,10 +340,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
@@ -436,9 +431,9 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@1c07000 {
+		pcie_phy: phy@1c06000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
-			reg = <0x01c07000 0x2000>;
+			reg = <0x01c06000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -585,10 +580,10 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -603,7 +598,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -612,7 +607,7 @@
 			compatible = "qcom,sdx55-pdc", "qcom,pdc";
 			reg = <0x0b210000 0x30000>;
 			qcom,pdc-ranges = <0 179 52>;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
 		};
diff --git a/src/arm/qcom/qcom-sdx65-mtp.dts b/src/arm/qcom/qcom-sdx65-mtp.dts
index 9649c85..07c10c8 100644
--- a/src/arm/qcom/qcom-sdx65-mtp.dts
+++ b/src/arm/qcom/qcom-sdx65-mtp.dts
@@ -12,7 +12,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>
 #include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
diff --git a/src/arm/qcom/qcom-sdx65.dtsi b/src/arm/qcom/qcom-sdx65.dtsi
index e559ada..40591a4 100644
--- a/src/arm/qcom/qcom-sdx65.dtsi
+++ b/src/arm/qcom/qcom-sdx65.dtsi
@@ -204,8 +204,16 @@
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sdx65";
 			reg = <0x00100000 0x001f7400>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
-			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie_phy>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_pipe_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
 			#power-domain-cells = <1>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -233,32 +241,27 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c8>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x2000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
 			status = "disabled";
 
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6e00 0x160>,
-				      <0x00ff7000 0x1ec>,
-				      <0x00ff6200 0x1e00>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
 		};
 
 		system_noc: interconnect@1620000 {
@@ -338,7 +341,7 @@
 			power-domains = <&gcc PCIE_GDSC>;
 
 			phys = <&pcie_phy>;
-			phy-names = "pcie-phy";
+			phy-names = "pciephy";
 
 			max-link-speed = <3>;
 			num-lanes = <2>;
@@ -520,7 +523,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -530,7 +533,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0xd00>,
 				<0xc600000 0x2000000>,
diff --git a/src/arm/renesas/iwg20d-q7-dbcm-ca.dtsi b/src/arm/renesas/iwg20d-q7-dbcm-ca.dtsi
index e10f992..de52218 100644
--- a/src/arm/renesas/iwg20d-q7-dbcm-ca.dtsi
+++ b/src/arm/renesas/iwg20d-q7-dbcm-ca.dtsi
@@ -27,6 +27,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -69,6 +78,12 @@
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/src/arm/renesas/r8a7740-armadillo800eva.dts b/src/arm/renesas/r8a7740-armadillo800eva.dts
index d21e00e..e1ac2c1 100644
--- a/src/arm/renesas/r8a7740-armadillo800eva.dts
+++ b/src/arm/renesas/r8a7740-armadillo800eva.dts
@@ -132,7 +132,7 @@
 		i2c-gpio,delay-us = <5>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
@@ -143,6 +143,18 @@
 		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
 	};
 
+	panel {
+		compatible = "ampire,am-800480l1tmqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&reg_5p0v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdc0_rgb>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 
@@ -228,10 +240,22 @@
 	};
 };
 
-&pfc {
+&lcdc0 {
 	pinctrl-0 = <&lcd0_pins>;
 	pinctrl-names = "default";
 
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pfc {
 	ether_pins: ether {
 		groups = "gether_mii", "gether_int";
 		function = "gether";
diff --git a/src/arm/renesas/r8a7740.dtsi b/src/arm/renesas/r8a7740.dtsi
index 1b2cf5f..55884ec 100644
--- a/src/arm/renesas/r8a7740.dtsi
+++ b/src/arm/renesas/r8a7740.dtsi
@@ -398,6 +398,61 @@
 		status = "disabled";
 	};
 
+	lcdc0: lcd-controller@fe940000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe940000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc0_rgb: endpoint {
+				};
+			};
+		};
+	};
+
+	lcdc1: lcd-controller@fe944000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe944000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC1>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc1_rgb: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lcdc1_hdmi: endpoint {
+				};
+			};
+		};
+	};
+
 	tmu0: timer@fff80000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff80000 0x2c>;
@@ -474,6 +529,16 @@
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
+		lcdlclk0_clk: lcdlclk0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		lcdlclk1_clk: lcdlclk1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
 
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
diff --git a/src/arm/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/src/arm/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index b1f679d..a0b5743 100644
--- a/src/arm/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/src/arm/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -34,6 +34,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &du {
@@ -81,6 +90,12 @@
 		clock-names = "cec";
 		pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/src/arm/renesas/r8a7745-iwg22d-sodimm.dts b/src/arm/renesas/r8a7745-iwg22d-sodimm.dts
index c105932..2441104 100644
--- a/src/arm/renesas/r8a7745-iwg22d-sodimm.dts
+++ b/src/arm/renesas/r8a7745-iwg22d-sodimm.dts
@@ -182,7 +182,7 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	stmpe811@44 {
+	port-expander@44 {
 		compatible = "st,stmpe811";
 		reg = <0x44>;
 		interrupt-parent = <&gpio4>;
@@ -197,7 +197,7 @@
 		/* internal ADC reference */
 		st,ref-sel = <0>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
diff --git a/src/arm/renesas/r8a7779-marzen.dts b/src/arm/renesas/r8a7779-marzen.dts
index 08ea149..9b13e8d 100644
--- a/src/arm/renesas/r8a7779-marzen.dts
+++ b/src/arm/renesas/r8a7779-marzen.dts
@@ -52,10 +52,10 @@
 		states = <3300000 1>, <1800000 0>;
 	};
 
-	keyboard-irq {
+	keypad-0 {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&keyboard_irq_pins>;
+		pinctrl-0 = <&keypad0_pins>;
 		pinctrl-names = "default";
 
 		interrupt-parent = <&gpio0>;
@@ -76,11 +76,11 @@
 		};
 	};
 
-	keyboard-gpio {
+	keypad-1 {
 		compatible = "gpio-keys-polled";
 		poll-interval = <50>;
 
-		pinctrl-0 = <&keyboard_gpio_pins>;
+		pinctrl-0 = <&keypad1_pins>;
 		pinctrl-names = "default";
 
 		key-3 {
@@ -193,7 +193,7 @@
 };
 
 &gpio0 {
-	keyboard-irq-hog {
+	keypad0-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
 		input;
@@ -215,6 +215,35 @@
 };
 
 &lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18000000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
@@ -266,6 +295,11 @@
 		};
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	scif2_pins: scif2 {
 		groups = "scif2_data_c";
 		function = "scif2";
@@ -286,11 +320,11 @@
 		function = "hspi0";
 	};
 
-	keyboard_irq_pins: keyboard-irq {
+	keypad0_pins: keypad-0 {
 		pins = "GP_0_17", "GP_0_18";
 		bias-pull-up;
 	};
-	keyboard_gpio_pins: keyboard-gpio {
+	keypad1_pins: keypad-1 {
 		pins = "GP_0_19", "GP_0_20";
 		bias-pull-up;
 	};
diff --git a/src/arm/renesas/r8a7790-lager.dts b/src/arm/renesas/r8a7790-lager.dts
index 4d666ad..8590981 100644
--- a/src/arm/renesas/r8a7790-lager.dts
+++ b/src/arm/renesas/r8a7790-lager.dts
@@ -122,6 +122,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -303,7 +312,7 @@
 	 *
 	 * IIC0/I2C0 does not appear to support fallback to GPIO.
 	 */
-	i2cexio0: i2c-10 {
+	i2cexio0: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic0>, <&i2c0>;
 		i2c-bus-name = "i2c-exio0";
@@ -316,7 +325,7 @@
 	 * This is similar to the arangement described for i2cexio0 (above)
 	 * with a fallback to GPIO also provided.
 	 */
-	i2cexio1: i2c-11 {
+	i2cexio1: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -328,7 +337,7 @@
 	 * IIC2 and I2C2 may be switched using pinmux.
 	 * A fallback to GPIO is also provided.
 	 */
-	i2chdmi: i2c-12 {
+	i2chdmi: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -361,6 +370,12 @@
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&fixedregulator1v8>;
+			dvdd-supply = <&fixedregulator1v8>;
+			pvdd-supply = <&fixedregulator1v8>;
+			dvdd-3v-supply = <&fixedregulator3v3>;
+			bgvdd-supply = <&fixedregulator1v8>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -417,7 +432,7 @@
 	 * IIC3 and I2C3 may be switched using pinmux.
 	 * IIC3/I2C3 does not appear to support fallback to GPIO.
 	 */
-	i2cpwr: i2c-13 {
+	i2cpwr: i2c-mux4 {
 		compatible = "i2c-demux-pinctrl";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins>;
@@ -432,6 +447,7 @@
 			interrupt-parent = <&irqc0>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7790-stout.dts b/src/arm/renesas/r8a7790-stout.dts
index fe14727..683f739 100644
--- a/src/arm/renesas/r8a7790-stout.dts
+++ b/src/arm/renesas/r8a7790-stout.dts
@@ -44,6 +44,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -296,6 +305,12 @@
 		clocks = <&osc4_clk>;
 		clock-names = "cec";
 
+		avdd-supply = <&fixedregulator1v8>;
+		dvdd-supply = <&fixedregulator1v8>;
+		pvdd-supply = <&fixedregulator1v8>;
+		dvdd-3v-supply = <&fixedregulator3v3>;
+		bgvdd-supply = <&fixedregulator1v8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -332,6 +347,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/src/arm/renesas/r8a7791-koelsch.dts b/src/arm/renesas/r8a7791-koelsch.dts
index 545515b..0efd9f9 100644
--- a/src/arm/renesas/r8a7791-koelsch.dts
+++ b/src/arm/renesas/r8a7791-koelsch.dts
@@ -174,6 +174,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -340,7 +358,7 @@
 	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio1: i2c-12 {
+	i2cexio1: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -351,7 +369,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-13 {
+	i2chdmi: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -384,6 +402,12 @@
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -446,7 +470,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -795,6 +819,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7791-porter.dts b/src/arm/renesas/r8a7791-porter.dts
index ec0a20d..93c86e9 100644
--- a/src/arm/renesas/r8a7791-porter.dts
+++ b/src/arm/renesas/r8a7791-porter.dts
@@ -47,6 +47,24 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -148,7 +166,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -179,6 +197,12 @@
 			interrupt-parent = <&gpio3>;
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -389,6 +413,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
diff --git a/src/arm/renesas/r8a7792-blanche.dts b/src/arm/renesas/r8a7792-blanche.dts
index e793134..540a9ad 100644
--- a/src/arm/renesas/r8a7792-blanche.dts
+++ b/src/arm/renesas/r8a7792-blanche.dts
@@ -30,6 +30,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -182,6 +191,35 @@
 };
 
 &lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x00000000 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18000000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
@@ -240,6 +278,11 @@
 		function = "du1";
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	keyboard_pins: keyboard {
 		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
 		bias-pull-up;
@@ -296,6 +339,12 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -332,6 +381,7 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7792-wheat.dts b/src/arm/renesas/r8a7792-wheat.dts
index f87e78f..000f21a 100644
--- a/src/arm/renesas/r8a7792-wheat.dts
+++ b/src/arm/renesas/r8a7792-wheat.dts
@@ -29,6 +29,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -254,6 +263,12 @@
 		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -283,6 +298,12 @@
 		reg = <0x39>, <0x49>, <0x29>, <0x59>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/src/arm/renesas/r8a7793-gose.dts b/src/arm/renesas/r8a7793-gose.dts
index 79b537b..1ea6c75 100644
--- a/src/arm/renesas/r8a7793-gose.dts
+++ b/src/arm/renesas/r8a7793-gose.dts
@@ -165,6 +165,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -324,7 +342,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -368,6 +386,12 @@
 			interrupt-parent = <&gpio3>;
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -430,7 +454,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-12 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -735,6 +759,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7794-alt.dts b/src/arm/renesas/r8a7794-alt.dts
index 08df031..b5ecafb 100644
--- a/src/arm/renesas/r8a7794-alt.dts
+++ b/src/arm/renesas/r8a7794-alt.dts
@@ -192,7 +192,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -222,7 +222,7 @@
 	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -453,6 +453,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7794-silk.dts b/src/arm/renesas/r8a7794-silk.dts
index b7af1be..595e074 100644
--- a/src/arm/renesas/r8a7794-silk.dts
+++ b/src/arm/renesas/r8a7794-silk.dts
@@ -102,6 +102,15 @@
 		};
 	};
 
+	d1_8v: regulator-d1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-d3-3v {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -225,7 +234,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -256,6 +265,12 @@
 			interrupt-parent = <&gpio5>;
 			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&d1_8v>;
+			dvdd-supply = <&d1_8v>;
+			pvdd-supply = <&d1_8v>;
+			dvdd-3v-supply = <&d3_3v>;
+			bgvdd-supply = <&d1_8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -424,6 +439,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/src/arm/renesas/r9a06g032.dtsi b/src/arm/renesas/r9a06g032.dtsi
index 0fa565a..fa63e1a 100644
--- a/src/arm/renesas/r9a06g032.dtsi
+++ b/src/arm/renesas/r9a06g032.dtsi
@@ -437,7 +437,7 @@
 		};
 
 		can0: can@52104000 {
-			compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
 			reg = <0x52104000 0x800>;
 			reg-io-width = <4>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm/rockchip/rk3036-kylin.dts b/src/arm/rockchip/rk3036-kylin.dts
index 67e1e04..e32c73d 100644
--- a/src/arm/rockchip/rk3036-kylin.dts
+++ b/src/arm/rockchip/rk3036-kylin.dts
@@ -8,11 +8,26 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x20000000>;
 	};
 
+	hdmi_con: hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
@@ -110,6 +125,12 @@
 	status = "okay";
 };
 
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
diff --git a/src/arm/rockchip/rk3036.dtsi b/src/arm/rockchip/rk3036.dtsi
index 78686fc..04af224 100644
--- a/src/arm/rockchip/rk3036.dtsi
+++ b/src/arm/rockchip/rk3036.dtsi
@@ -17,6 +17,9 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -282,7 +285,6 @@
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		rockchip,default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
 		dma-names = "rx-tx";
@@ -402,12 +404,20 @@
 		pinctrl-0 = <&hdmi_ctl>;
 		status = "disabled";
 
-		hdmi_in: port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			hdmi_in_vop: endpoint@0 {
+
+			hdmi_in: port@0 {
 				reg = <0>;
-				remote-endpoint = <&vop_out_hdmi>;
+
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
 			};
 		};
 	};
diff --git a/src/arm/rockchip/rk3066a.dtsi b/src/arm/rockchip/rk3066a.dtsi
index de9915d..30139f2 100644
--- a/src/arm/rockchip/rk3066a.dtsi
+++ b/src/arm/rockchip/rk3066a.dtsi
@@ -13,6 +13,11 @@
 / {
 	compatible = "rockchip,rk3066a";
 
+	aliases {
+		gpio4 = &gpio4;
+		gpio6 = &gpio6;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/src/arm/rockchip/rk3128-evb.dts b/src/arm/rockchip/rk3128-evb.dts
index c38f424..c7ab7fc 100644
--- a/src/arm/rockchip/rk3128-evb.dts
+++ b/src/arm/rockchip/rk3128-evb.dts
@@ -12,11 +12,6 @@
 	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		i2c1 = &i2c1;
 		mmc0 = &emmc;
 	};
 
diff --git a/src/arm/rockchip/rk3128-xpi-3128.dts b/src/arm/rockchip/rk3128-xpi-3128.dts
new file mode 100644
index 0000000..03a9788
--- /dev/null
+++ b/src/arm/rockchip/rk3128-xpi-3128.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3128.dtsi"
+
+/ {
+	model = "Geniatech XPI-3128";
+	compatible = "geniatech,xpi-3128", "rockchip,rk3128";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <3300000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	dc_5v: dc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * This is a vbus-supply, which also supplies the GL852G usb hub,
+	 * thus has to be always-on
+	 */
+	host_pwr_5v: host-pwr-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1500>;
+		regulator-name = "HOST_PWR_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+		};
+
+		led-spd {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			/*
+			 * currently not allowed to be set as per
+			 * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml
+			 * and needs to set in userspace:
+			 *
+			 * linux,default-trigger = "netdev";
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&spd_led>;
+		};
+	};
+
+	mcu3v3: mcu3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "MCU3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_ddr: vcc-ddr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DDR";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_IO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_LAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <500>;
+		regulator-name = "VCC_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc33_hdmi: vcc33-hdmi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC33_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcca_33>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcca_33: vcca-33-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCA_33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_11: vdd-11-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd11_hdmi: vdd11-hdmi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD11_HDMI";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vdd_11>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_arm: vdd-arm-regulator {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_ARM";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV.
+	 * Since there are HW blocks in PD_LOGIC (which are all driven by
+	 * this supply), that either do not have a driver at all or the
+	 * driver does not implement regulator support we have to make
+	 * sure here that the voltage never drops below 1050 mV.
+	 */
+	vdd_log: vdd-log-regulator {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_LOG";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-dutycycle-range = <30 100>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <4000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	vmmc-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates= <50000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "HEADER_5", "HEADER_3",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "HEADER_22", "HEADER_23", "", "HEADER_19",
+			  "HEADER_26", "HEADER_21", "HEADER_24", "",
+			  /* GPIO0 C0-C7 */
+			  "", "HEADER_18", "", "",
+			  "", "", "", "",
+			  /* GPIO0 D0-D7 */
+			  "HEADER_36", "", "", "",
+			  "", "", "HEADER_13", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37",
+			  "HEADER_40", "HEADER_38", "", "",
+			  /* GPIO1 B0-B7 */
+			  "HEADER_11", "", "", "HEADER_29",
+			  "HEADER_31", "", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 C0-C7 */
+			  "", "", "", "",
+			  "HEADER_27", "", "", "",
+			  /* GPIO2 D0-D7 */
+			  "", "", "HEADER_8", "HEADER_10",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 C0-C7 */
+			  "", "HEADER_32", "", "",
+			  "", "", "", "HEADER_12",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "HEADER_15",
+			  "", "", "", "";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		max-speed = <100>;
+		/* T2.2.4 min. 1 us */
+		reset-assert-us = <10>;
+		/* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */
+		reset-deassert-us = <20>;
+		reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp83848c_rst>;
+	};
+};
+
+&pinctrl {
+	dp83848c {
+		dp83848c_rst: dp83848c-rst {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		spd_led: spd-led {
+			rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		host_drv: host-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	vmmc-supply = <&vcc_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	vusb_a-supply = <&vcc_io>;
+	vusb_d-supply = <&vdd_11>;
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
diff --git a/src/arm/rockchip/rk3128.dtsi b/src/arm/rockchip/rk3128.dtsi
index 01edf24..e2264c4 100644
--- a/src/arm/rockchip/rk3128.dtsi
+++ b/src/arm/rockchip/rk3128.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3128-power.h>
 
 / {
 	compatible = "rockchip,rk3128";
@@ -15,6 +16,20 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -100,6 +115,27 @@
 		};
 	};
 
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <975000 975000 1250000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1250000 1250000 1250000>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
@@ -130,9 +166,119 @@
 		};
 	};
 
+	gpu: gpu@10090000 {
+		compatible = "rockchip,rk3128-mali", "arm,mali-400";
+		reg = <0x10090000 0x10000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		operating-points-v2 = <&gpu_opp_table>;
+		resets = <&cru SRST_GPU>;
+		power-domains = <&power RK3128_PD_GPU>;
+		status = "disabled";
+	};
+
 	pmu: syscon@100a0000 {
 		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
 		reg = <0x100a0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3128-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3128_PD_VIO {
+				reg = <RK3128_PD_VIO>;
+				clocks = <&cru ACLK_CIF>,
+					 <&cru HCLK_CIF>,
+					 <&cru DCLK_EBC>,
+					 <&cru HCLK_EBC>,
+					 <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>,
+					 <&cru ACLK_LCDC0>,
+					 <&cru HCLK_LCDC0>,
+					 <&cru PCLK_MIPI>,
+					 <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>,
+					 <&cru ACLK_VIO0>,
+					 <&cru ACLK_VIO1>,
+					 <&cru HCLK_VIO>,
+					 <&cru HCLK_VIO_H2P>,
+					 <&cru DCLK_VOP>,
+					 <&cru SCLK_VOP>;
+				pm_qos = <&qos_ebc>,
+					 <&qos_iep>,
+					 <&qos_lcdc>,
+					 <&qos_rga>,
+					 <&qos_vip>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_VIDEO {
+				reg = <RK3128_PD_VIDEO>;
+				clocks = <&cru ACLK_VDPU>,
+					 <&cru HCLK_VDPU>,
+					 <&cru ACLK_VEPU>,
+					 <&cru HCLK_VEPU>,
+					 <&cru SCLK_HEVC_CORE>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_GPU {
+				reg = <RK3128_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	qos_gpu: qos@1012d000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012d000 0x20>;
+	};
+
+	qos_vpu: qos@1012e000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012e000 0x20>;
+	};
+
+	qos_rga: qos@1012f000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f000 0x20>;
+	};
+
+	qos_ebc: qos@1012f080 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f080 0x20>;
+	};
+
+	qos_iep: qos@1012f100 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f100 0x20>;
+	};
+
+	qos_lcdc: qos@1012f180 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f180 0x20>;
+	};
+
+	qos_vip: qos@1012f200 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f200 0x20>;
 	};
 
 	gic: interrupt-controller@10139000 {
@@ -154,6 +300,9 @@
 		clocks = <&cru HCLK_OTG>;
 		clock-names = "otg";
 		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
 		phys = <&usb2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -163,6 +312,7 @@
 		compatible = "generic-ehci";
 		reg = <0x101c0000 0x20000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
 		phys = <&usb2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -172,6 +322,7 @@
 		compatible = "generic-ohci";
 		reg = <0x101e0000 0x20000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
 		phys = <&usb2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -261,6 +412,8 @@
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
 			#clock-cells = <0>;
 			status = "disabled";
 
@@ -518,6 +671,34 @@
 		#dma-cells = <1>;
 	};
 
+	gmac: ethernet@2008c000 {
+		compatible = "rockchip,rk3128-gmac";
+		reg = <0x2008c000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_MAC>,
+			 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			 <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+			 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			      "mac_clk_rx", "mac_clk_tx",
+			      "clk_mac_ref", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		rx-fifo-depth = <4096>;
+		tx-fifo-depth = <2048>;
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3128-pinctrl";
 		rockchip,grf = <&grf>;
@@ -843,6 +1024,10 @@
 				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
 			};
 
+			sdmmc_det: sdmmc-det {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+			};
+
 			sdmmc_wp: sdmmc-wp {
 				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
 			};
diff --git a/src/arm/rockchip/rk322x.dtsi b/src/arm/rockchip/rk322x.dtsi
index a721744..831561f 100644
--- a/src/arm/rockchip/rk322x.dtsi
+++ b/src/arm/rockchip/rk322x.dtsi
@@ -15,6 +15,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
diff --git a/src/arm/rockchip/rk3288.dtsi b/src/arm/rockchip/rk3288.dtsi
index cb9cdad..ead343d 100644
--- a/src/arm/rockchip/rk3288.dtsi
+++ b/src/arm/rockchip/rk3288.dtsi
@@ -19,6 +19,15 @@
 
 	aliases {
 		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		gpio8 = &gpio8;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/src/arm/rockchip/rk3xxx.dtsi b/src/arm/rockchip/rk3xxx.dtsi
index cb4e42e..f37137f 100644
--- a/src/arm/rockchip/rk3xxx.dtsi
+++ b/src/arm/rockchip/rk3xxx.dtsi
@@ -16,6 +16,10 @@
 
 	aliases {
 		ethernet0 = &emac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/src/arm/rockchip/rv1108.dtsi b/src/arm/rockchip/rv1108.dtsi
index abf3006..f3291f3 100644
--- a/src/arm/rockchip/rv1108.dtsi
+++ b/src/arm/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
diff --git a/src/arm/rockchip/rv1109-sonoff-ihost.dts b/src/arm/rockchip/rv1109-sonoff-ihost.dts
new file mode 100644
index 0000000..45dced8
--- /dev/null
+++ b/src/arm/rockchip/rv1109-sonoff-ihost.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 2G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1109";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git a/src/arm/rockchip/rv1109.dtsi b/src/arm/rockchip/rv1109.dtsi
new file mode 100644
index 0000000..9cbaa08
--- /dev/null
+++ b/src/arm/rockchip/rv1109.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rv1126.dtsi"
+
+/ {
+	compatible = "rockchip,rv1109";
+
+	cpus {
+		/delete-node/ cpu@f02;
+		/delete-node/ cpu@f03;
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/src/arm/rockchip/rv1126-edgeble-neu2-io.dts b/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
index f09be84..0c2396b 100644
--- a/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
+++ b/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
@@ -61,7 +61,7 @@
 	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>;
 	tx_delay = <0x2a>;
 	rx_delay = <0x1a>;
 	status = "okay";
diff --git a/src/arm/rockchip/rv1126-pinctrl.dtsi b/src/arm/rockchip/rv1126-pinctrl.dtsi
index bb34b0c..06b1d7f 100644
--- a/src/arm/rockchip/rv1126-pinctrl.dtsi
+++ b/src/arm/rockchip/rv1126-pinctrl.dtsi
@@ -87,6 +87,16 @@
 				<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
 		};
 	};
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2_xfer: i2c2-xfer {
+			rockchip,pins =
+				/* i2c2_scl */
+				<0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>,
+				/* i2c2_sda */
+				<0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
+		};
+	};
 	pwm2 {
 		/omit-if-no-ref/
 		pwm2m0_pins: pwm2m0-pins {
@@ -105,36 +115,56 @@
 	};
 	rgmii {
 		/omit-if-no-ref/
-		rgmiim1_pins: rgmiim1-pins {
+		rgmiim1_miim: rgmiim1-miim {
 			rockchip,pins =
 				/* rgmii_mdc_m1 */
 				<2 RK_PC2 2 &pcfg_pull_none>,
 				/* rgmii_mdio_m1 */
-				<2 RK_PC1 2 &pcfg_pull_none>,
-				/* rgmii_rxclk_m1 */
-				<2 RK_PD3 2 &pcfg_pull_none>,
+				<2 RK_PC1 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_rxer: rgmiim1-rxer {
+			rockchip,pins =
+				/* rgmii_rxer_m1 */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus2: rgmiim1-bus2 {
+			rockchip,pins =
 				/* rgmii_rxd0_m1 */
 				<2 RK_PB5 2 &pcfg_pull_none>,
 				/* rgmii_rxd1_m1 */
 				<2 RK_PB6 2 &pcfg_pull_none>,
-				/* rgmii_rxd2_m1 */
-				<2 RK_PC7 2 &pcfg_pull_none>,
-				/* rgmii_rxd3_m1 */
-				<2 RK_PD0 2 &pcfg_pull_none>,
 				/* rgmii_rxdv_m1 */
 				<2 RK_PB4 2 &pcfg_pull_none>,
-				/* rgmii_txclk_m1 */
-				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd0_m1 */
 				<2 RK_PC3 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd1_m1 */
 				<2 RK_PC4 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txen_m1 */
+				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus4: rgmiim1-bus4 {
+			rockchip,pins =
+				/* rgmii_rxclk_m1 */
+				<2 RK_PD3 2 &pcfg_pull_none>,
+				/* rgmii_rxd2_m1 */
+				<2 RK_PC7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m1 */
+				<2 RK_PD0 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m1 */
+				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd2_m1 */
 				<2 RK_PD1 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd3_m1 */
-				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>,
-				/* rgmii_txen_m1 */
-				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_mclkinout: rgmiim1-mclkinout {
+			rockchip,pins =
+				/* rgmii_clk_m1 */
+				<2 RK_PB7 2 &pcfg_pull_none>;
 		};
 	};
 	sdmmc0 {
@@ -263,6 +293,14 @@
 				/* uart3_tx_m0 */
 				<3 RK_PC6 4 &pcfg_pull_up>;
 		};
+		/omit-if-no-ref/
+		uart3m2_xfer: uart3m2-xfer {
+			rockchip,pins =
+				/* uart3_rx_m2 */
+				<3 RK_PA1 4 &pcfg_pull_up>,
+				/* uart3_tx_m2 */
+				<3 RK_PA0 4 &pcfg_pull_up>;
+		};
 	};
 	uart4 {
 		/omit-if-no-ref/
@@ -273,6 +311,14 @@
 				/* uart4_tx_m0 */
 				<3 RK_PA4 4 &pcfg_pull_up>;
 		};
+		/omit-if-no-ref/
+		uart4m2_xfer: uart4m2-xfer {
+			rockchip,pins =
+				/* uart4_rx_m2 */
+				<1 RK_PD4 3 &pcfg_pull_up>,
+				/* uart4_tx_m2 */
+				<1 RK_PD5 3 &pcfg_pull_up>;
+		};
 	};
 	uart5 {
 		/omit-if-no-ref/
diff --git a/src/arm/rockchip/rv1126-sonoff-ihost.dts b/src/arm/rockchip/rv1126-sonoff-ihost.dts
new file mode 100644
index 0000000..77386a4
--- /dev/null
+++ b/src/arm/rockchip/rv1126-sonoff-ihost.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 4G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1126";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git a/src/arm/rockchip/rv1126-sonoff-ihost.dtsi b/src/arm/rockchip/rv1126-sonoff-ihost.dtsi
new file mode 100644
index 0000000..32b329e
--- /dev/null
+++ b/src/arm/rockchip/rv1126-sonoff-ihost.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
+			  <&cru CLK_GMAC_TX_RX>;
+	assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
+				 <&cru RMII_MODE_CLK>;
+	assigned-clock-rates = <0>, <50000000>;
+	clock_in_out = "output";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
+	status = "okay";
+};
+
+&mdio {
+	phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-active-low;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <10000>;
+		reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vcc_1v8>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_dovdd>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_dovdd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
+		enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m2_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m2_xfer>;
+	status = "okay";
+};
diff --git a/src/arm/rockchip/rv1126.dtsi b/src/arm/rockchip/rv1126.dtsi
index 9ccd1ba..bb603ca 100644
--- a/src/arm/rockchip/rv1126.dtsi
+++ b/src/arm/rockchip/rv1126.dtsi
@@ -21,6 +21,13 @@
 
 	aliases {
 		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
 	};
 
 	cpus {
@@ -231,6 +238,20 @@
 		status = "disabled";
 	};
 
+	i2c2: i2c@ff400000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff400000 0x1000>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	uart1: serial@ff410000 {
 		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
 		reg = <0xff410000 0x100>;
diff --git a/src/arm/samsung/exynos4.dtsi b/src/arm/samsung/exynos4.dtsi
index f775b93..7f981b5 100644
--- a/src/arm/samsung/exynos4.dtsi
+++ b/src/arm/samsung/exynos4.dtsi
@@ -203,16 +203,16 @@
 
 		camera: camera@11800000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0x11800000 0xa0000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			fimc_0: fimc@11800000 {
+			fimc_0: fimc@0 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11800000 0x1000>;
+				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC0>,
 					 <&clock CLK_SCLK_FIMC0>;
@@ -223,9 +223,9 @@
 				status = "disabled";
 			};
 
-			fimc_1: fimc@11810000 {
+			fimc_1: fimc@10000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11810000 0x1000>;
+				reg = <0x00010000 0x1000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC1>,
 					 <&clock CLK_SCLK_FIMC1>;
@@ -236,9 +236,9 @@
 				status = "disabled";
 			};
 
-			fimc_2: fimc@11820000 {
+			fimc_2: fimc@20000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11820000 0x1000>;
+				reg = <0x00020000 0x1000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC2>,
 					 <&clock CLK_SCLK_FIMC2>;
@@ -249,9 +249,9 @@
 				status = "disabled";
 			};
 
-			fimc_3: fimc@11830000 {
+			fimc_3: fimc@30000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11830000 0x1000>;
+				reg = <0x00030000 0x1000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC3>,
 					 <&clock CLK_SCLK_FIMC3>;
@@ -262,9 +262,9 @@
 				status = "disabled";
 			};
 
-			csis_0: csis@11880000 {
+			csis_0: csis@80000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11880000 0x4000>;
+				reg = <0x00080000 0x4000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS0>,
 					 <&clock CLK_SCLK_CSIS0>;
@@ -278,9 +278,9 @@
 				#size-cells = <0>;
 			};
 
-			csis_1: csis@11890000 {
+			csis_1: csis@90000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11890000 0x4000>;
+				reg = <0x00090000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS1>,
 					 <&clock CLK_SCLK_CSIS1>;
diff --git a/src/arm/samsung/exynos4210-i9100.dts b/src/arm/samsung/exynos4210-i9100.dts
index a9ec1f6..0d84957 100644
--- a/src/arm/samsung/exynos4210-i9100.dts
+++ b/src/arm/samsung/exynos4210-i9100.dts
@@ -184,6 +184,28 @@
 		};
 	};
 
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		touchscreen@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpl0>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vtouchled_reg>;
+			vcc-supply = <&vtouch_reg>;
+			linux,keycodes = <KEY_MENU>, <KEY_BACK>;
+		};
+	};
+
 	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -380,6 +402,23 @@
 	vusb_a-supply = <&vusbdac_reg>;
 };
 
+&i2c_1 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	lis3dh: accelerometer@19 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x19>;
+
+		mount-matrix = "0", "-1", "0",
+			       "1", "0", "0",
+			       "0", "0", "1";
+	};
+};
+
 &i2c_3 {
 	status = "okay";
 
@@ -513,7 +552,6 @@
 				regulator-name = "TOUCH_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 			};
 
 			vpll_reg: LDO10 {
@@ -527,6 +565,14 @@
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				/*
+				 * Force-enable this regulator; otherwise the
+				 * kernel hangs very early in the boot process
+				 * for about 12 seconds, without apparent
+				 * reason.
+				 */
+				regulator-always-on;
 			};
 
 			vcclcd_reg: LDO13 {
diff --git a/src/arm/samsung/exynos4212-tab3.dtsi b/src/arm/samsung/exynos4212-tab3.dtsi
index d7954ff..e5254e3 100644
--- a/src/arm/samsung/exynos4212-tab3.dtsi
+++ b/src/arm/samsung/exynos4212-tab3.dtsi
@@ -434,6 +434,7 @@
 };
 
 &fimd {
+	samsung,invert-vclk;
 	status = "okay";
 };
 
diff --git a/src/arm/samsung/exynos4x12.dtsi b/src/arm/samsung/exynos4x12.dtsi
index 84c1db2..b4b5e76 100644
--- a/src/arm/samsung/exynos4x12.dtsi
+++ b/src/arm/samsung/exynos4x12.dtsi
@@ -451,14 +451,15 @@
 };
 
 &camera {
+	ranges = <0x0 0x11800000 0xba1000>;
 	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
 		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
+	fimc_lite_0: fimc-lite@b90000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
+		reg = <0x00b90000 0x1000>;
 		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
@@ -467,9 +468,9 @@
 		status = "disabled";
 	};
 
-	fimc_lite_1: fimc-lite@123a0000 {
+	fimc_lite_1: fimc-lite@ba0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123a0000 0x1000>;
+		reg = <0x00ba0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -478,9 +479,9 @@
 		status = "disabled";
 	};
 
-	fimc_is: fimc-is@12000000 {
+	fimc_is: fimc-is@800000 {
 		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
+		reg = <0x00800000 0x260000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
@@ -516,18 +517,15 @@
 		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
 			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
 		iommu-names = "isp", "drc", "fd", "mcuctl";
+		samsung,pmu-syscon = <&pmu_system_controller>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		status = "disabled";
 
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
+		i2c1_isp: i2c-isp@940000 {
 			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
+			reg = <0x00940000 0x100>;
 			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
 			clock-names = "i2c_isp";
 			#address-cells = <1>;
diff --git a/src/arm/samsung/s5pv210.dtsi b/src/arm/samsung/s5pv210.dtsi
index f7de5b5..ed560c9 100644
--- a/src/arm/samsung/s5pv210.dtsi
+++ b/src/arm/samsung/s5pv210.dtsi
@@ -549,17 +549,17 @@
 
 		camera: camera@fa600000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0xfa600000 0xe01000>;
 			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
 			clock-names = "sclk_cam0", "sclk_cam1";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			csis0: csis@fa600000 {
+			csis0: csis@0 {
 				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
+				reg = <0x00000000 0x4000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
@@ -572,9 +572,9 @@
 				#size-cells = <0>;
 			};
 
-			fimc0: fimc@fb200000 {
+			fimc0: fimc@c00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
+				reg = <0x00c00000 0x1000>;
 				interrupts = <5>;
 				interrupt-parent = <&vic2>;
 				clocks = <&clocks CLK_FIMC0>,
@@ -586,9 +586,9 @@
 				samsung,cam-if;
 			};
 
-			fimc1: fimc@fb300000 {
+			fimc1: fimc@d00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
+				reg = <0x00d00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <6>;
 				clocks = <&clocks CLK_FIMC1>,
@@ -602,9 +602,9 @@
 				samsung,lcd-wb;
 			};
 
-			fimc2: fimc@fb400000 {
+			fimc2: fimc@e00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
+				reg = <0x00e00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <7>;
 				clocks = <&clocks CLK_FIMC2>,
diff --git a/src/arm/st/ste-dbx5x0.dtsi b/src/arm/st/ste-dbx5x0.dtsi
index d5d8877..0f87abe 100644
--- a/src/arm/st/ste-dbx5x0.dtsi
+++ b/src/arm/st/ste-dbx5x0.dtsi
@@ -425,7 +425,7 @@
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
+			reg = <0x8012e000 0x80>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -440,7 +440,7 @@
 		gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
+			reg = <0x8012e080 0x80>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -455,7 +455,7 @@
 		gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
+			reg = <0x8000e000 0x80>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -470,7 +470,7 @@
 		gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
+			reg = <0x8000e080 0x80>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -485,7 +485,7 @@
 		gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
+			reg = <0x8000e100 0x80>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -500,7 +500,7 @@
 		gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
+			reg = <0x8000e180 0x80>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -515,7 +515,7 @@
 		gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
+			reg = <0x8011e000 0x80>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -530,7 +530,7 @@
 		gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
+			reg = <0x8011e080 0x80>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -545,7 +545,7 @@
 		gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
+			reg = <0xa03fe000 0x80>;
 			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/src/arm/st/ste-href-ab8500.dtsi b/src/arm/st/ste-href-ab8500.dtsi
index e1de9d3..5eeb44c 100644
--- a/src/arm/st/ste-href-ab8500.dtsi
+++ b/src/arm/st/ste-href-ab8500.dtsi
@@ -9,6 +9,54 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
 				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
diff --git a/src/arm/st/ste-href-ab8505.dtsi b/src/arm/st/ste-href-ab8505.dtsi
new file mode 100644
index 0000000..268db68
--- /dev/null
+++ b/src/arm/st/ste-href-ab8505.dtsi
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include "ste-ab8505.dtsi"
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
+				gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio2_a_1";
+							};
+							default_cfg {
+								pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio4_a_1";
+							};
+							default_cfg {
+								pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio10_d_1";
+							};
+							default_cfg {
+								pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio11_d_1";
+							};
+							default_cfg {
+								pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio12_d_1";
+							};
+							default_cfg {
+								pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio13_d_1";
+							};
+							default_cfg {
+								pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio16_a_1";
+							};
+							default_cfg {
+								pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio24_a_1";
+							};
+							default_cfg {
+								pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio25_a_1";
+							};
+							default_cfg {
+								pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio36_a_1";
+							};
+							default_cfg {
+								pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio37_a_1";
+							};
+							default_cfg {
+								pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio38_a_1";
+							};
+							default_cfg {
+								pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio39_a_1";
+							};
+							default_cfg {
+								pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio42_a_1";
+							};
+							default_cfg {
+								pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio26_d_1";
+							};
+							default_cfg {
+								pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio35_d_1";
+							};
+							default_cfg {
+								pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								function = "ycbcr";
+								groups = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								function = "pwmout";
+								groups = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								function = "adi1";
+								groups = "adi1_d_1";
+							};
+							default_cfg {
+								pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								function = "usbuicc";
+								groups = "usbuicc_d_1";
+							};
+							default_cfg {
+								pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								function = "dmic";
+								groups = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								function = "extcpena";
+								groups = "extcpena_d_1";
+							};
+							default_cfg {
+								pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								function = "modsclsda";
+								groups = "modsclsda_d_1";
+							};
+							default_cfg {
+								pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio1_a_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio3_a_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+				/*
+				 * Charging is not working on the HREF unless an actual battery is
+				 * mounted, most HREFs have a DC cable in to the "battery power"
+				 * which means this will only be cofusing. So do not enable charging
+				 * of the HREFs.
+				 */
+				ab8500_fg {
+					status = "disabled";
+				};
+				ab8500_btemp {
+					status = "disabled";
+				};
+				ab8500_charger {
+					status = "disabled";
+				};
+				ab8500_chargalg {
+					status = "disabled";
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/st/ste-href.dtsi b/src/arm/st/ste-href.dtsi
index 13b11db..fbf0309 100644
--- a/src/arm/st/ste-href.dtsi
+++ b/src/arm/st/ste-href.dtsi
@@ -242,61 +242,6 @@
 			status = "okay";
 		};
 
-		prcmu@80157000 {
-			ab8500 {
-				gpio {
-				};
-
-				phy {
-					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&usb_a_1_default>;
-					pinctrl-1 = <&usb_a_1_sleep>;
-				};
-
-				regulator {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
 		pinctrl {
 			sdi0 {
 				sdi0_default_mode: sdi0_default {
diff --git a/src/arm/st/ste-href520-tvk.dts b/src/arm/st/ste-href520-tvk.dts
index 7f661f8..5677df4 100644
--- a/src/arm/st/ste-href520-tvk.dts
+++ b/src/arm/st/ste-href520-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8520.dtsi"
+#include "ste-href-ab8505.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r3.dtsi"
 
diff --git a/src/arm/st/ste-hrefprev60-stuib.dts b/src/arm/st/ste-hrefprev60-stuib.dts
index a29e345..b142bb2 100644
--- a/src/arm/st/ste-hrefprev60-stuib.dts
+++ b/src/arm/st/ste-hrefprev60-stuib.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-stuib.dtsi"
 
diff --git a/src/arm/st/ste-hrefprev60-tvk.dts b/src/arm/st/ste-hrefprev60-tvk.dts
index 1968bd1..5da1ff4 100644
--- a/src/arm/st/ste-hrefprev60-tvk.dts
+++ b/src/arm/st/ste-hrefprev60-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
diff --git a/src/arm/st/ste-hrefprev60.dtsi b/src/arm/st/ste-hrefprev60.dtsi
index 9859ee9..c87fd27 100644
--- a/src/arm/st/ste-hrefprev60.dtsi
+++ b/src/arm/st/ste-hrefprev60.dtsi
@@ -62,7 +62,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		pinctrl {
diff --git a/src/arm/st/ste-hrefv60plus-stuib.dts b/src/arm/st/ste-hrefv60plus-stuib.dts
index 7a5b6aa..c4abe24 100644
--- a/src/arm/st/ste-hrefv60plus-stuib.dts
+++ b/src/arm/st/ste-hrefv60plus-stuib.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-stuib.dtsi"
 
diff --git a/src/arm/st/ste-hrefv60plus-tvk.dts b/src/arm/st/ste-hrefv60plus-tvk.dts
index d5af3f3..f55e8de 100644
--- a/src/arm/st/ste-hrefv60plus-tvk.dts
+++ b/src/arm/st/ste-hrefv60plus-tvk.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
diff --git a/src/arm/st/ste-hrefv60plus.dtsi b/src/arm/st/ste-hrefv60plus.dtsi
index e66fa59..b23966c 100644
--- a/src/arm/st/ste-hrefv60plus.dtsi
+++ b/src/arm/st/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
  * Copyright 2012 ST-Ericsson AB
  */
 
-#include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
 / {
@@ -191,7 +190,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
+			cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
 		};
 
 		pinctrl {
diff --git a/src/arm/st/ste-nomadik-stn8815.dtsi b/src/arm/st/ste-nomadik-stn8815.dtsi
index 6816eef..4d37c5f 100644
--- a/src/arm/st/ste-nomadik-stn8815.dtsi
+++ b/src/arm/st/ste-nomadik-stn8815.dtsi
@@ -52,7 +52,7 @@
 
 	gpio0: gpio@101e4000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e4000 0x80>;
+		reg = <0x101e4000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <6>;
 		interrupt-controller;
@@ -66,7 +66,7 @@
 
 	gpio1: gpio@101e5000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e5000 0x80>;
+		reg = <0x101e5000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <7>;
 		interrupt-controller;
@@ -80,7 +80,7 @@
 
 	gpio2: gpio@101e6000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e6000 0x80>;
+		reg = <0x101e6000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <8>;
 		interrupt-controller;
@@ -94,7 +94,7 @@
 
 	gpio3: gpio@101e7000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e7000 0x80>;
+		reg = <0x101e7000 0x80>;
 		ngpio = <28>;
 		interrupt-parent = <&vica>;
 		interrupts = <9>;
diff --git a/src/arm/st/ste-snowball.dts b/src/arm/st/ste-snowball.dts
index 27c2ec5..1322abf 100644
--- a/src/arm/st/ste-snowball.dts
+++ b/src/arm/st/ste-snowball.dts
@@ -266,7 +266,7 @@
 			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			/* GPIO218 MMC_CD */
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
diff --git a/src/arm/st/ste-ux500-samsung-codina-tmo.dts b/src/arm/st/ste-ux500-samsung-codina-tmo.dts
index 463942a..c623cc3 100644
--- a/src/arm/st/ste-ux500-samsung-codina-tmo.dts
+++ b/src/arm/st/ste-ux500-samsung-codina-tmo.dts
@@ -310,7 +310,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/src/arm/st/ste-ux500-samsung-codina.dts b/src/arm/st/ste-ux500-samsung-codina.dts
index c1ae0e2..2355ca6 100644
--- a/src/arm/st/ste-ux500-samsung-codina.dts
+++ b/src/arm/st/ste-ux500-samsung-codina.dts
@@ -402,7 +402,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/src/arm/st/ste-ux500-samsung-gavini.dts b/src/arm/st/ste-ux500-samsung-gavini.dts
index b21e40d..ad9a20c 100644
--- a/src/arm/st/ste-ux500-samsung-gavini.dts
+++ b/src/arm/st/ste-ux500-samsung-gavini.dts
@@ -362,7 +362,7 @@
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
 			/* "flash detect" actually card detect */
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 
diff --git a/src/arm/st/ste-ux500-samsung-janice.dts b/src/arm/st/ste-ux500-samsung-janice.dts
index 6e586e8..229f7c3 100644
--- a/src/arm/st/ste-ux500-samsung-janice.dts
+++ b/src/arm/st/ste-ux500-samsung-janice.dts
@@ -412,7 +412,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/src/arm/st/ste-ux500-samsung-kyle.dts b/src/arm/st/ste-ux500-samsung-kyle.dts
index ba44210..cdb147d 100644
--- a/src/arm/st/ste-ux500-samsung-kyle.dts
+++ b/src/arm/st/ste-ux500-samsung-kyle.dts
@@ -238,7 +238,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_1_default>;
 			pinctrl-1 = <&mc0_a_1_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/src/arm/st/stm32429i-eval.dts b/src/arm/st/stm32429i-eval.dts
index 576235e..afa417b 100644
--- a/src/arm/st/stm32429i-eval.dts
+++ b/src/arm/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git a/src/arm/st/stm32f469-disco.dts b/src/arm/st/stm32f469-disco.dts
index cbbd521..8a4f8dd 100644
--- a/src/arm/st/stm32f469-disco.dts
+++ b/src/arm/st/stm32f469-disco.dts
@@ -69,16 +69,9 @@
 		serial0 = &usart3;
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vdd_dsi: vdd-dsi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_dsi";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -164,7 +157,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_dsi>;
+		power-supply = <&vcc_3v3>;
 		status = "okay";
 
 		port {
@@ -219,7 +212,7 @@
 
 &sdio {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain";
diff --git a/src/arm/st/stm32f746.dtsi b/src/arm/st/stm32f746.dtsi
index 53a8e2d..65c72b6 100644
--- a/src/arm/st/stm32f746.dtsi
+++ b/src/arm/st/stm32f746.dtsi
@@ -274,6 +274,26 @@
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
 		};
 
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>;
+			status = "disabled";
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>;
+			status = "disabled";
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
@@ -491,9 +511,30 @@
 			status = "disabled";
 		};
 
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>;
+			status = "disabled";
+		};
+
 		syscfg: syscon@40013800 {
 			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>;
 		};
 
 		exti: interrupt-controller@40013c00 {
@@ -554,6 +595,26 @@
 			};
 		};
 
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>;
+			status = "disabled";
+		};
+
+		spi6: spi@40015400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015400 0x400>;
+			interrupts = <86>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>;
+			status = "disabled";
+		};
+
 		ltdc: display-controller@40016800 {
 			compatible = "st,stm32-ltdc";
 			reg = <0x40016800 0x200>;
diff --git a/src/arm/st/stm32mp135.dtsi b/src/arm/st/stm32mp135.dtsi
index abf2acd..68d32f9 100644
--- a/src/arm/st/stm32mp135.dtsi
+++ b/src/arm/st/stm32mp135.dtsi
@@ -8,5 +8,16 @@
 
 / {
 	soc {
+		dcmipp: dcmipp@5a000000 {
+			compatible = "st,stm32mp13-dcmipp";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc DCMIPP_R>;
+			clocks = <&rcc DCMIPP_K>;
+			status = "disabled";
+
+			port {
+			};
+		};
 	};
 };
diff --git a/src/arm/st/stm32mp151.dtsi b/src/arm/st/stm32mp151.dtsi
index 6150891..fa4cbd3 100644
--- a/src/arm/st/stm32mp151.dtsi
+++ b/src/arm/st/stm32mp151.dtsi
@@ -1521,6 +1521,8 @@
 			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -1531,6 +1533,8 @@
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			companion = <&usbh_ohci>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
diff --git a/src/arm/st/stm32mp151a-prtt1l.dtsi b/src/arm/st/stm32mp151a-prtt1l.dtsi
index dd23de8..3938d35 100644
--- a/src/arm/st/stm32mp151a-prtt1l.dtsi
+++ b/src/arm/st/stm32mp151a-prtt1l.dtsi
@@ -206,8 +206,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp157a-dk1-scmi.dts b/src/arm/st/stm32mp157a-dk1-scmi.dts
index afcd628..ce59372 100644
--- a/src/arm/st/stm32mp157a-dk1-scmi.dts
+++ b/src/arm/st/stm32mp157a-dk1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
-	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -59,7 +59,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/src/arm/st/stm32mp157a-stinger96.dtsi b/src/arm/st/stm32mp157a-stinger96.dtsi
index 5f85598..5c1cc48 100644
--- a/src/arm/st/stm32mp157a-stinger96.dtsi
+++ b/src/arm/st/stm32mp157a-stinger96.dtsi
@@ -313,8 +313,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp157c-dk2-scmi.dts b/src/arm/st/stm32mp157c-dk2-scmi.dts
index 39358d9..c20a738 100644
--- a/src/arm/st/stm32mp157c-dk2-scmi.dts
+++ b/src/arm/st/stm32mp157c-dk2-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
-	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -65,7 +65,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/src/arm/st/stm32mp157c-dk2.dts b/src/arm/st/stm32mp157c-dk2.dts
index 510cca5..7a701f7 100644
--- a/src/arm/st/stm32mp157c-dk2.dts
+++ b/src/arm/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@
 		reg = <0x38>;
 		interrupts = <2 2>;
 		interrupt-parent = <&gpiof>;
-		interrupt-controller;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
 		status = "okay";
diff --git a/src/arm/st/stm32mp157c-ed1-scmi.dts b/src/arm/st/stm32mp157c-ed1-scmi.dts
index 07ea765..5e2eaf5 100644
--- a/src/arm/st/stm32mp157c-ed1-scmi.dts
+++ b/src/arm/st/stm32mp157c-ed1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
-	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -64,7 +64,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/src/arm/st/stm32mp157c-emstamp-argon.dtsi b/src/arm/st/stm32mp157c-emstamp-argon.dtsi
index f928cfb..4792004 100644
--- a/src/arm/st/stm32mp157c-emstamp-argon.dtsi
+++ b/src/arm/st/stm32mp157c-emstamp-argon.dtsi
@@ -500,14 +500,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp157c-ev1-scmi.dts b/src/arm/st/stm32mp157c-ev1-scmi.dts
index 813086e..3226fb9 100644
--- a/src/arm/st/stm32mp157c-ev1-scmi.dts
+++ b/src/arm/st/stm32mp157c-ev1-scmi.dts
@@ -11,8 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
-	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
-		     "st,stm32mp157";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -70,7 +69,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/src/arm/st/stm32mp157c-ev1.dts b/src/arm/st/stm32mp157c-ev1.dts
index cd9c3ff..9eb9a1b 100644
--- a/src/arm/st/stm32mp157c-ev1.dts
+++ b/src/arm/st/stm32mp157c-ev1.dts
@@ -362,7 +362,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/src/arm/st/stm32mp157c-osd32mp1-red.dts b/src/arm/st/stm32mp157c-osd32mp1-red.dts
index bd67a1d..527c33b 100644
--- a/src/arm/st/stm32mp157c-osd32mp1-red.dts
+++ b/src/arm/st/stm32mp157c-osd32mp1-red.dts
@@ -197,14 +197,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/src/arm/st/stm32mp157c-phycore-stm32mp15-som.dtsi
index 4e8b2d2..bf0c320 100644
--- a/src/arm/st/stm32mp157c-phycore-stm32mp15-som.dtsi
+++ b/src/arm/st/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -547,14 +547,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xc-lxa-tac.dtsi b/src/arm/st/stm32mp15xc-lxa-tac.dtsi
index f09b7c3..fc3a238 100644
--- a/src/arm/st/stm32mp15xc-lxa-tac.dtsi
+++ b/src/arm/st/stm32mp15xc-lxa-tac.dtsi
@@ -567,9 +567,6 @@ baseboard_eeprom: &sip_eeprom {
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
-
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcom-drc02.dtsi b/src/arm/st/stm32mp15xx-dhcom-drc02.dtsi
index 35b1034..bb4f8a0 100644
--- a/src/arm/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -152,7 +152,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcom-pdk2.dtsi b/src/arm/st/stm32mp15xx-dhcom-pdk2.dtsi
index 46b87a2..466d970 100644
--- a/src/arm/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -305,7 +305,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcom-picoitx.dtsi b/src/arm/st/stm32mp15xx-dhcom-picoitx.dtsi
index abc5953..b5bc53acc 100644
--- a/src/arm/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -119,12 +119,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcor-avenger96.dtsi b/src/arm/st/stm32mp15xx-dhcor-avenger96.dtsi
index 0069ad7..343a461 100644
--- a/src/arm/st/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcor-avenger96.dtsi
@@ -489,8 +489,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcor-drc-compact.dtsi b/src/arm/st/stm32mp15xx-dhcor-drc-compact.dtsi
index 92d906b..bc4ddcb 100644
--- a/src/arm/st/stm32mp15xx-dhcor-drc-compact.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -312,12 +312,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcor-testbench.dtsi b/src/arm/st/stm32mp15xx-dhcor-testbench.dtsi
index ab7f0ba..6e79c4b 100644
--- a/src/arm/st/stm32mp15xx-dhcor-testbench.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcor-testbench.dtsi
@@ -168,12 +168,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dkx.dtsi b/src/arm/st/stm32mp15xx-dkx.dtsi
index 511113f..f7634c5 100644
--- a/src/arm/st/stm32mp15xx-dkx.dtsi
+++ b/src/arm/st/stm32mp15xx-dkx.dtsi
@@ -680,7 +680,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/src/arm/ti/keystone/keystone-k2e-netcp.dtsi b/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
index bff73a0..5c88a90 100644
--- a/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git a/src/arm/ti/keystone/keystone-k2g-evm.dts b/src/arm/ti/keystone/keystone-k2g-evm.dts
index 7bfc80f..f0ddbbc 100644
--- a/src/arm/ti/keystone/keystone-k2g-evm.dts
+++ b/src/arm/ti/keystone/keystone-k2g-evm.dts
@@ -9,7 +9,7 @@
 #include "keystone-k2g.dtsi"
 
 / {
-	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
+	compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
 	model = "Texas Instruments K2G General Purpose EVM";
 
 	memory@800000000 {
diff --git a/src/arm/ti/keystone/keystone-k2g-netcp.dtsi b/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
index f630693..7109ca0 100644
--- a/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
@@ -37,9 +37,9 @@ qmss: qmss@4020000 {
 		qpend {
 			qpend-0 {
 				qrange = <77 8>;
-				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
-					     0 311 0xf04 0 312 0xf04 0 313 0xf04
-					     0 314 0xf04 0 315 0xf04>;
+				interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04
+					      0 311 0xf04 0 312 0xf04 0 313 0xf04
+					      0 314 0xf04 0 315 0xf04>;
 				qalloc-by-id;
 			};
 		};
diff --git a/src/arm/ti/keystone/keystone-k2hk-evm.dts b/src/arm/ti/keystone/keystone-k2hk-evm.dts
index 206df8a..8dfb542 100644
--- a/src/arm/ti/keystone/keystone-k2hk-evm.dts
+++ b/src/arm/ti/keystone/keystone-k2hk-evm.dts
@@ -10,7 +10,7 @@
 #include "keystone-k2hk.dtsi"
 
 / {
-	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+	compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
 
 	reserved-memory {
diff --git a/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi b/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
index 8a421c6..c2ee775 100644
--- a/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -49,9 +49,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <8704 16>;
diff --git a/src/arm/ti/keystone/keystone-k2l-netcp.dtsi b/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
index 5ec6680..1afebd7 100644
--- a/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git a/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi b/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi
index b8730aa..a59331a 100644
--- a/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi
+++ b/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins>;
 
-	tpm_spi_tis@0 {
+	tpm@0 {
 		compatible = "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <500000>;
diff --git a/src/arm/ti/omap/am571x-idk.dts b/src/arm/ti/omap/am571x-idk.dts
index 4842502..322cf79 100644
--- a/src/arm/ti/omap/am571x-idk.dts
+++ b/src/arm/ti/omap/am571x-idk.dts
@@ -168,8 +168,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git a/src/arm/ti/omap/am5729-beagleboneai.dts b/src/arm/ti/omap/am5729-beagleboneai.dts
index 9a234dc..3e834fc 100644
--- a/src/arm/ti/omap/am5729-beagleboneai.dts
+++ b/src/arm/ti/omap/am5729-beagleboneai.dts
@@ -197,7 +197,7 @@
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
 		ti,enable-id-detection;
-		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -415,7 +415,6 @@
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
diff --git a/src/arm/ti/omap/am572x-idk-common.dtsi b/src/arm/ti/omap/am572x-idk-common.dtsi
index 1d66278..3fca848 100644
--- a/src/arm/ti/omap/am572x-idk-common.dtsi
+++ b/src/arm/ti/omap/am572x-idk-common.dtsi
@@ -169,8 +169,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git a/src/arm/ti/omap/dra7-evm-common.dtsi b/src/arm/ti/omap/dra7-evm-common.dtsi
index 4cdffd6..ed5199d 100644
--- a/src/arm/ti/omap/dra7-evm-common.dtsi
+++ b/src/arm/ti/omap/dra7-evm-common.dtsi
@@ -15,12 +15,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	sound0: sound0 {
diff --git a/src/arm/ti/omap/dra71-evm.dts b/src/arm/ti/omap/dra71-evm.dts
index a643644..f747ac5 100644
--- a/src/arm/ti/omap/dra71-evm.dts
+++ b/src/arm/ti/omap/dra71-evm.dts
@@ -293,11 +293,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &ipu2 {
diff --git a/src/arm/ti/omap/dra72-evm-common.dtsi b/src/arm/ti/omap/dra72-evm-common.dtsi
index 31ab0c6..f8151c6 100644
--- a/src/arm/ti/omap/dra72-evm-common.dtsi
+++ b/src/arm/ti/omap/dra72-evm-common.dtsi
@@ -96,12 +96,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	hdmi0: connector {
diff --git a/src/arm/ti/omap/dra76-evm.dts b/src/arm/ti/omap/dra76-evm.dts
index 57868ac..cf9c3d3 100644
--- a/src/arm/ti/omap/dra76-evm.dts
+++ b/src/arm/ti/omap/dra76-evm.dts
@@ -533,11 +533,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &m_can0 {
diff --git a/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts b/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts
index 533ce7c..fbff15a 100644
--- a/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts
+++ b/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts
@@ -52,7 +52,7 @@
 
 &uart2 {
 	/delete-property/dma-names;
-	bluetooth {
+	bluetooth-gnss {
 		compatible = "ti,wl1283-st";
 		enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
 		max-speed = <3000000>;
diff --git a/src/arm/ti/omap/motorola-mapphone-common.dtsi b/src/arm/ti/omap/motorola-mapphone-common.dtsi
index a2bb360..a0c53d9 100644
--- a/src/arm/ti/omap/motorola-mapphone-common.dtsi
+++ b/src/arm/ti/omap/motorola-mapphone-common.dtsi
@@ -6,15 +6,6 @@
 #include "motorola-cpcap-mapphone.dtsi"
 
 / {
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
 	/*
 	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
 	 * then 1023 - 1024 seems to contain mbm.
@@ -63,46 +54,6 @@
 		regulator-always-on;
 	};
 
-	/* FS USB Host PHY on port 1 for mdm6600 */
-	fsusb1_phy: usb-phy@1 {
-		compatible = "motorola,mapphone-mdm6600";
-		pinctrl-0 = <&usb_mdm6600_pins>;
-		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
-		pinctrl-names = "default", "sleep";
-		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
-		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
-		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
-		/* mode: gpio_148 gpio_149 */
-		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
-				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
-		/* cmd: gpio_103 gpio_104 gpio_142 */
-		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
-				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
-				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
-		/* status: gpio_52 gpio_53 gpio_55 */
-		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
-					<&gpio2 21 GPIO_ACTIVE_HIGH>,
-					<&gpio2 23 GPIO_ACTIVE_HIGH>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB host TLL nop-phy on port 2 for w3glte */
-	hsusb2_phy: usb-phy@2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	/* LCD regulator from sw5 source */
-	lcd_regulator: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd";
-		regulator-min-microvolt = <5050000>;
-		regulator-max-microvolt = <5050000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
-		enable-active-high;
-		vin-supply = <&sw5>;
-	};
-
 	/* This is probably coming straight from the battery.. */
 	wl12xx_vmmc: regulator-wl12xx {
 		compatible = "regulator-fixed";
@@ -133,41 +84,6 @@
 
 		dais = <&mcbsp2_port>, <&mcbsp3_port>;
 	};
-
-	pwm8: pwm-8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: pwm-9 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <10000000>;
-	};
-
-	backlight: backlight {
-		compatible = "led-backlight";
-
-		leds = <&backlight_led>;
-		brightness-levels = <31 63 95 127 159 191 223 255>;
-		default-brightness-level = <6>;
-	};
 };
 
 &cpu_thermal {
@@ -197,57 +113,6 @@
 	status = "okay";
 };
 
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcsi>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "motorola,droid4-panel", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-
-		backlight = <&backlight>;
-
-		width-mm = <50>;
-		height-mm = <89>;
-		rotation = <90>;
-
-		panel-timing {
-			clock-frequency = <0>;		/* Calculated by dsi */
-
-			hback-porch = <2>;
-			hactive = <540>;
-			hfront-porch = <0>;
-			hsync-len = <2>;
-
-			vback-porch = <1>;
-			vactive = <960>;
-			vfront-porch = <0>;
-			vsync-len = <1>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
 &hdmi {
 	status = "okay";
 	pinctrl-0 = <&dss_hdmi_pins>;
@@ -262,13 +127,6 @@
 	};
 };
 
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
-	pinctrl-0 = <&hdq_pins>;
-	pinctrl-names = "default";
-	ti,mode = "1w";
-};
-
 &i2c1 {
 	tmp105@48 {
 		compatible = "ti,tmp105";
@@ -322,34 +180,6 @@
 	};
 };
 
-&i2c2 {
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
-
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
-		/* gpio_183 with sys_nirq2 pad as wakeup */
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
-				      <&omap4_pmx_core 0x160>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-
-	isl29030@44 {
-		compatible = "isil,isl29030";
-		reg = <0x44>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&als_proximity_pins>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
-	};
-};
-
 &omap4_pmx_core {
 
 	/* hdmi_hpd.gpio_63 */
@@ -359,13 +189,6 @@
 		>;
 	};
 
-	hdq_pins: hdq-pins {
-		pinctrl-single,pins = <
-		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
-		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
@@ -427,73 +250,6 @@
 		>;
 	};
 
-	touchscreen_pins: touchscreen-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	als_proximity_pins: als-proximity-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_mdm6600_pins: usb-mdm6600-pins {
-		pinctrl-single,pins = <
-		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
-		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
-		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
-		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
-		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
-		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
-		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
-		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	/* Modem sleep pins to keep gpio_49 high with internal pull */
-	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
 	usb_ulpi_pins: usb-ulpi-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x196, MUX_MODE7)
@@ -601,18 +357,6 @@
 		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
 		>;
 	};
-
-	vibrator_direction_pin: vibrator-direction-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: vibrator-enable-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
 };
 
 &omap4_pmx_wkup {
@@ -629,17 +373,6 @@
 	status = "disabled";
 };
 
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
-	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_32k_ck>;
-};
-
-&timer9 {
-	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_32k_ck>;
-};
-
 /*
  * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
  * for wake-up events for both the USB PHY and the UART. We can use gpio_149
@@ -672,20 +405,6 @@
 	};
 };
 
-&usbhsohci {
-	phys = <&fsusb1_phy>;
-	phy-names = "usb";
-};
-
-&usbhsehci {
-	phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
-	port1-mode = "ohci-phy-4pin-dpdm";
-	port2-mode = "ehci-tll";
-};
-
 /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
 &usb_otg_hs {
 	interface-type = <1>;
@@ -698,23 +417,6 @@
 	power = <150>;
 };
 
-&i2c4 {
-	ak8975: magnetometer@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
-		rotation-matrix = "-1", "0", "0",
-				  "0", "1", "0",
-				  "0", "0", "-1";
-
-	};
-};
-
 &mcbsp2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
diff --git a/src/arm/ti/omap/motorola-mapphone-handset.dtsi b/src/arm/ti/omap/motorola-mapphone-handset.dtsi
new file mode 100644
index 0000000..f3f9ff0
--- /dev/null
+++ b/src/arm/ti/omap/motorola-mapphone-handset.dtsi
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+	/* FS USB Host PHY on port 1 for mdm6600 */
+	fsusb1_phy: usb-phy@1 {
+		compatible = "motorola,mapphone-mdm6600";
+		pinctrl-0 = <&usb_mdm6600_pins>;
+		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+		pinctrl-names = "default", "sleep";
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
+		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
+		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
+		/* mode: gpio_148 gpio_149 */
+		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
+		/* cmd: gpio_103 gpio_104 gpio_142 */
+		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
+				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
+		/* status: gpio_52 gpio_53 gpio_55 */
+		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+					<&gpio2 21 GPIO_ACTIVE_HIGH>,
+					<&gpio2 23 GPIO_ACTIVE_HIGH>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB host TLL nop-phy on port 2 for w3glte */
+	hsusb2_phy: usb-phy@2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	pwm8: pwm-8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_direction_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer8>;
+		ti,clock-source = <0x01>;
+	};
+
+	pwm9: pwm-9 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_enable_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x01>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwm-names = "enable", "direction";
+		direction-duty-cycle-ns = <10000000>;
+	};
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
+&i2c2 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+		/* gpio_183 with sys_nirq2 pad as wakeup */
+		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+				      <&omap4_pmx_core 0x160>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+
+	isl29030@44 {
+		compatible = "isil,isl29030";
+		reg = <0x44>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&als_proximity_pins>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+	};
+};
+
+&omap4_pmx_core {
+	hdq_pins: hdq-pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/* kpd_row0.gpio_178 */
+	tmp105_irq: tmp105-irq-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_mdm6600_pins: usb-mdm6600-pins {
+		pinctrl-single,pins = <
+		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	/* Modem sleep pins to keep gpio_49 high with internal pull */
+	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	als_proximity_pins: als-proximity-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	vibrator_direction_pin: vibrator-direction-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
+		>;
+	};
+
+	vibrator_enable_pin: vibrator-enable-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
+		>;
+	};
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&usbhsohci {
+	phys = <&fsusb1_phy>;
+	phy-names = "usb";
+};
+
+&usbhsehci {
+	phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+	port1-mode = "ohci-phy-4pin-dpdm";
+	port2-mode = "ehci-tll";
+};
+
+&i2c4 {
+	ak8975: magnetometer@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+		rotation-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+
+	};
+};
diff --git a/src/arm/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/src/arm/ti/omap/motorola-mapphone-mz607-mz617.dtsi
new file mode 100644
index 0000000..a356b3a
--- /dev/null
+++ b/src/arm/ti/omap/motorola-mapphone-mz607-mz617.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+		       <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+	vmmc-supply = <&vsimcard>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio_176 */
+};
diff --git a/src/arm/ti/omap/motorola-mapphone-xt8xx.dtsi b/src/arm/ti/omap/motorola-mapphone-xt8xx.dtsi
new file mode 100644
index 0000000..8b8de92
--- /dev/null
+++ b/src/arm/ti/omap/motorola-mapphone-xt8xx.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-handset.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+
+	/* LCD regulator from sw5 source */
+	lcd_regulator: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
+		enable-active-high;
+		vin-supply = <&sw5>;
+	};
+};
+
+&dsi1 {
+	status = "okay";
+	vdd-supply = <&vcsi>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "motorola,droid4-panel", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+		vddi-supply = <&lcd_regulator>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		backlight = <&backlight>;
+
+		width-mm = <50>;
+		height-mm = <89>;
+		rotation = <90>;
+
+		panel-timing {
+			clock-frequency = <0>;		/* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <540>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <960>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
diff --git a/src/arm/ti/omap/omap4-droid-bionic-xt875.dts b/src/arm/ti/omap/omap4-droid-bionic-xt875.dts
index ccf03a7..1d9000f 100644
--- a/src/arm/ti/omap/omap4-droid-bionic-xt875.dts
+++ b/src/arm/ti/omap/omap4-droid-bionic-xt875.dts
@@ -1,11 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
 	model = "Motorola Droid Bionic XT875";
 	compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
 };
 
 &keypad {
diff --git a/src/arm/ti/omap/omap4-droid4-xt894.dts b/src/arm/ti/omap/omap4-droid4-xt894.dts
index e833c21..cc3f3e1 100644
--- a/src/arm/ti/omap/omap4-droid4-xt894.dts
+++ b/src/arm/ti/omap/omap4-droid4-xt894.dts
@@ -1,9 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
+	model = "Motorola Droid 4 XT894";
+	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -33,11 +45,6 @@
 	};
 };
 
-/ {
-	model = "Motorola Droid 4 XT894";
-	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
 &keypad {
 	keypad,num-rows = <8>;
 	keypad,num-columns = <8>;
diff --git a/src/arm/ti/omap/omap4-epson-embt2ws.dts b/src/arm/ti/omap/omap4-epson-embt2ws.dts
index 01d7838..24f7d02 100644
--- a/src/arm/ti/omap/omap4-epson-embt2ws.dts
+++ b/src/arm/ti/omap/omap4-epson-embt2ws.dts
@@ -51,6 +51,12 @@
 		regulator-name = "unknown";
 	};
 
+	wl12xx_pwrseq: wl12xx-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
+
        /* regulator for wl12xx on sdio2 */
 	wl12xx_vmmc: wl12xx-vmmc {
 		pinctrl-names = "default";
@@ -74,6 +80,7 @@
 	twl: pmic@48 {
 		compatible = "ti,twl6032";
 		reg = <0x48>;
+		#clock-cells = <1>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-controller;
@@ -294,6 +301,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wl12xx_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
+	mmc-pwrseq = <&wl12xx_pwrseq>;
 	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0x12e>;
 	non-removable;
@@ -454,10 +462,12 @@
 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART2_RX>;
 
-	/*
-	 * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic
-	 * which does not have a driver
-	 */
+	bluetooth-gnss {
+		compatible = "ti,wl1283-st";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;	/* GPIO_25 */
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
 };
 
 &uart3 {
diff --git a/src/arm/ti/omap/omap4-xyboard-mz609.dts b/src/arm/ti/omap/omap4-xyboard-mz609.dts
new file mode 100644
index 0000000..762934e
--- /dev/null
+++ b/src/arm/ti/omap/omap4-xyboard-mz609.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ609";
+	compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&i2c1 {
+	led-controller@38 {
+		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x38>;
+
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
+
+		backlight_led: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = ":backlight";
+		};
+	};
+};
diff --git a/src/arm/ti/omap/omap4-xyboard-mz617.dts b/src/arm/ti/omap/omap4-xyboard-mz617.dts
new file mode 100644
index 0000000..b9caea3
--- /dev/null
+++ b/src/arm/ti/omap/omap4-xyboard-mz617.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ617";
+	compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+};