mips: au1x00: Remove support for these SoCs

The only platform left for the AU1x00 SoCs was the pb1x00 platform, an
apparent clone of the dbau1x00 platform.  As pb1x00 had no listed
maintainer I am assuming that it is also orphaned.  Remove this platform
and then remove the unused SoC support.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

3 files changed, 0 insertions, 140 deletions

diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
deleted file mode 100644
index 01296e0..0000000
--- a/include/configs/pb1x00.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-/*
- * This file contains the configuration parameters for the dbau1x00 board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SOC_AU1X00	1  /* alchemy series cpu */
-
-#ifdef CONFIG_PB1000
-#define CONFIG_SOC_AU1000	1
-#else
-#ifdef CONFIG_PB1100
-#define CONFIG_SOC_AU1100	1
-#else
-#ifdef CONFIG_PB1500
-#define CONFIG_SOC_AU1500	1
-#else
-#error "No valid board set"
-#endif
-#endif
-#endif
-
-#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"addmisc=setenv bootargs ${bootargs} "				\
-		"console=ttyS0,${baudrate} "				\
-		"panic=1\0"						\
-	"bootfile=/vmlinux.img\0"				\
-	"load=tftp 80500000 ${u-boot}\0"				\
-	""
-/* Boot from NFS root */
-#define CONFIG_BOOTCOMMAND	"bootp; setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm"
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_MALLOC_LEN		128*1024
-
-#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ	396000000
-
-#define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
-
-#define	CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x80100000
-#undef CONFIG_SYS_MEMTEST_START
-#define CONFIG_SYS_MEMTEST_START       0x80200000
-#define CONFIG_SYS_MEMTEST_END		0x83800000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
-
-#define PHYS_FLASH_1		0xbec00000 /* Flash Bank #1 */
-#define PHYS_FLASH_2		0xbfc00000 /* Flash Bank #2 */
-
-#define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	0x4000000
-
-/* We boot from this flash, selected with dip switch */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_2
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* Address and size of Primary Environment Sector	*/
-#define CONFIG_ENV_ADDR		0xB0030000
-#define CONFIG_ENV_SIZE		0x10000
-
-#define CONFIG_FLASH_16BIT
-
-#define CONFIG_NR_DRAM_BANKS	2
-
-#define CONFIG_MEMSIZE_IN_BYTES
-
-/*---USB -------------------------------------------*/
-#if 0
-#define CONFIG_USB_OHCI
-#endif
-
-/*---ATA PCMCIA ------------------------------------*/
-#if 0
-#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
-#define CONFIG_PCMCIA_SLOT_A
-
-#define CONFIG_ATAPI 1
-
-/* We run CF in "true ide" mode or a harddrive via pcmcia */
-#define CONFIG_IDE_PCMCIA 1
-
-/* We only support one slot for now */
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET     8
-
-/* Offset for normal register accesses  */
-#define CONFIG_SYS_ATA_REG_OFFSET      0
-
-/* Offset for alternate registers       */
-#define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
-
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-
-#endif	/* __CONFIG_H */
diff --git a/include/netdev.h b/include/netdev.h
index f278690..5500162 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -25,7 +25,6 @@ int cpu_eth_init(bd_t *bis);
 
 /* Driver initialization prototypes */
 int at91emac_register(bd_t *bis, unsigned long iobase);
-int au1x00_enet_initialize(bd_t*);
 int ax88180_initialize(bd_t *bis);
 int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
 int bfin_EMAC_initialize(bd_t *bis);
diff --git a/include/serial.h b/include/serial.h
index b9ef6d9..9cd6f10 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -182,7 +182,6 @@ struct serial_dev_priv {
 #define serial_get_ops(dev)	((struct dm_serial_ops *)(dev)->driver->ops)
 
 void atmel_serial_initialize(void);
-void au1x00_serial_initialize(void);
 void mcf_serial_initialize(void);
 void mpc85xx_serial_initialize(void);
 void mpc8xx_serial_initialize(void);