Merge branch '2021-09-25-TI-platform-updates' into next

- Start moving some TI board docs to rST
- Assorted TI-specific Kconfig migrations and namespace cleanups.  This
  also allows for some code cleanups.

17 files changed, 0 insertions, 126 deletions

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index edfd890..e54708c 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -14,21 +14,6 @@
 
 #include <configs/ti_omap3_common.h>
 
-/* Hardware drivers */
-
-/*
- * USB configuration
- * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
- * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_USB_EHCI_OMAP
-#else
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	57
-#endif
-
-/* I2C */
-
 /* Ethernet */
 #define CONFIG_NET_RETRY_COUNT		10
 
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index ff1949e..0042659 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -54,9 +54,6 @@
 
 #if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION		1
-#define CONFIG_USB_XHCI_OMAP
-
-#define CONFIG_AM437X_USB2PHY2_HOST
 #endif
 
 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET)
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 5396586..9568444 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -48,11 +48,6 @@
 #define CONFIG_NET_RETRY_COUNT		10
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */
 
-/* USB xHCI HOST */
-#define CONFIG_USB_XHCI_OMAP
-
-#define CONFIG_OMAP_USB3PHY1_HOST
-
 /* SATA */
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 4ca4f35..38e421e 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -10,8 +10,6 @@
 #ifndef __CONFIG_CM_T335_H
 #define __CONFIG_CM_T335_H
 
-#define CONFIG_CM_T335
-
 #include <configs/ti_am335x_common.h>
 
 #undef CONFIG_MAX_RAM_BANK_SIZE
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index a290cf0..6e5c26e 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -8,7 +8,6 @@
 #ifndef __CONFIG_CM_T43_H
 #define __CONFIG_CM_T43_H
 
-#define CONFIG_CM_T43
 #define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2GB */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 
@@ -45,10 +44,6 @@
 /* CPSW Ethernet support */
 #define CONFIG_SYS_RX_ETH_BUFFER	64
 
-/* USB support */
-#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_AM437X_USB2PHY2_HOST
-
 /* Power */
 #define CONFIG_POWER_TPS65218
 
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 4613834..361ee96 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -74,11 +74,6 @@
 
 /* SPI SPL */
 
-/* USB xHCI HOST */
-#define CONFIG_USB_XHCI_OMAP
-
-#define CONFIG_OMAP_USB2PHY2_HOST
-
 /* SATA */
 #define CONFIG_SCSI_AHCI_PLAT
 
diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
index 35439c0..9b25c34 100644
--- a/include/configs/k2e_evm.h
+++ b/include/configs/k2e_evm.h
@@ -11,9 +11,6 @@
 
 #include <environment/ti/spi.h>
 
-/* Platform type */
-#define CONFIG_SOC_K2E
-
 #ifdef CONFIG_TI_SECURE_DEVICE
 #define DEFAULT_SEC_BOOT_ENV						\
 	DEFAULT_FIT_TI_ARGS						\
diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
index 17245ab..56dd9c7 100644
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@@ -12,9 +12,6 @@
 #include <environment/ti/mmc.h>
 #include <environment/ti/spi.h>
 
-/* Platform type */
-#define CONFIG_SOC_K2G
-
 /* U-Boot general configuration */
 #define ENV_KS2_BOARD_SETTINGS						\
 	DEFAULT_MMC_TI_ARGS						\
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index f5a20ce..cfc34c7 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -11,9 +11,6 @@
 
 #include <environment/ti/spi.h>
 
-/* Platform type */
-#define CONFIG_SOC_K2HK
-
 #ifdef CONFIG_TI_SECURE_DEVICE
 #define DEFAULT_SEC_BOOT_ENV						\
 	DEFAULT_FIT_TI_ARGS						\
diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h
index 97512c9..65988ff 100644
--- a/include/configs/k2l_evm.h
+++ b/include/configs/k2l_evm.h
@@ -11,9 +11,6 @@
 
 #include <environment/ti/spi.h>
 
-/* Platform type */
-#define CONFIG_SOC_K2L
-
 #ifdef CONFIG_TI_SECURE_DEVICE
 #define DEFAULT_SEC_BOOT_ENV						\
 	DEFAULT_FIT_TI_ARGS						\
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 5d300b1..265b1e2 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -41,9 +41,6 @@
 #endif /* CONFIG_SPL_OS_BOOT */
 #endif /* CONFIG_MTD_RAW_NAND */
 
-/* USB EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	147
-
 /* Enable Multi Bus support for I2C */
 #define CONFIG_I2C_MULTI_BUS
 
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 886f2e9..cac35ef 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -14,23 +14,6 @@
 
 #include <configs/ti_omap3_common.h>
 
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
- * order to allow for BCH8 to fit in.
- */
-
-/* Hardware drivers */
-
-/* I2C */
-
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_USB_EHCI_OMAP
-#endif
-#ifdef CONFIG_USB_EHCI_OMAP
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	4
-#endif
-
 /* Board NAND Info. */
 #ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	  /* Max number of */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 14eb363..69749ab 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -11,22 +11,6 @@
 #ifndef __CONFIG_PANDA_H
 #define __CONFIG_PANDA_H
 
-/*
- * High Level Configuration Options
- */
-
-/* USB UHH support options */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
-
-/* USB Networking options */
-
-#define CONFIG_UBOOT_ENABLE_PADS_ALL
-
 #include <configs/ti_omap4_common.h>
 
-/* GPIO */
-
-/* ENV related config options */
-
 #endif /* __CONFIG_PANDA_H */
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index a1f1daf..188ab0b 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -43,9 +43,6 @@
 /* USB UHH support options */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
-#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
-
 /* Enabled commands */
 
 /* USB Networking options */
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index f60d15b..d20c9e2 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -17,7 +17,6 @@
 /*
  * SoC Configuration
  */
-#define CONFIG_MACH_OMAPL138_LCDK
 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 166b839..adbc2ae 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -43,8 +43,6 @@
 
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
-/* EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	25
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 690ef0e..a6d7b8a 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -9,8 +9,6 @@
 #ifndef __CONFIG_KS2_EVM_H
 #define __CONFIG_KS2_EVM_H
 
-#define CONFIG_SOC_KEYSTONE
-
 /* U-Boot Build Configuration */
 
 /* SoC Configuration */
@@ -70,37 +68,6 @@
 #define CONFIG_SYS_SGMII_LINERATE_MHZ	1250
 #define CONFIG_SYS_SGMII_RATESCALE	2
 
-/* Keyston Navigator Configuration */
-#define CONFIG_TI_KSNAV
-#define CONFIG_KSNAV_QM_BASE_ADDRESS		KS2_QM_BASE_ADDRESS
-#define CONFIG_KSNAV_QM_CONF_BASE		KS2_QM_CONF_BASE
-#define CONFIG_KSNAV_QM_DESC_SETUP_BASE		KS2_QM_DESC_SETUP_BASE
-#define CONFIG_KSNAV_QM_STATUS_RAM_BASE		KS2_QM_STATUS_RAM_BASE
-#define CONFIG_KSNAV_QM_INTD_CONF_BASE		KS2_QM_INTD_CONF_BASE
-#define CONFIG_KSNAV_QM_PDSP1_CMD_BASE		KS2_QM_PDSP1_CMD_BASE
-#define CONFIG_KSNAV_QM_PDSP1_CTRL_BASE		KS2_QM_PDSP1_CTRL_BASE
-#define CONFIG_KSNAV_QM_PDSP1_IRAM_BASE		KS2_QM_PDSP1_IRAM_BASE
-#define CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE	KS2_QM_MANAGER_QUEUES_BASE
-#define CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE	KS2_QM_MANAGER_Q_PROXY_BASE
-#define CONFIG_KSNAV_QM_QUEUE_STATUS_BASE	KS2_QM_QUEUE_STATUS_BASE
-#define CONFIG_KSNAV_QM_LINK_RAM_BASE		KS2_QM_LINK_RAM_BASE
-#define CONFIG_KSNAV_QM_REGION_NUM		KS2_QM_REGION_NUM
-#define CONFIG_KSNAV_QM_QPOOL_NUM		KS2_QM_QPOOL_NUM
-
-/* NETCP pktdma */
-#define CONFIG_KSNAV_PKTDMA_NETCP
-#define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE	KS2_NETCP_PDMA_CTRL_BASE
-#define CONFIG_KSNAV_NETCP_PDMA_TX_BASE		KS2_NETCP_PDMA_TX_BASE
-#define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM	KS2_NETCP_PDMA_TX_CH_NUM
-#define CONFIG_KSNAV_NETCP_PDMA_RX_BASE		KS2_NETCP_PDMA_RX_BASE
-#define CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM	KS2_NETCP_PDMA_RX_CH_NUM
-#define CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE	KS2_NETCP_PDMA_SCHED_BASE
-#define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE	KS2_NETCP_PDMA_RX_FLOW_BASE
-#define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM	KS2_NETCP_PDMA_RX_FLOW_NUM
-#define CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE	KS2_NETCP_PDMA_RX_FREE_QUEUE
-#define CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE	KS2_NETCP_PDMA_RX_RCV_QUEUE
-#define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE	KS2_NETCP_PDMA_TX_SND_QUEUE
-
 /* Keystone net */
 #define CONFIG_KSNET_MAC_ID_BASE		KS2_MAC_ID_BASE_ADDR
 #define CONFIG_KSNET_NETCP_BASE			KS2_NETCP_BASE
@@ -108,8 +75,6 @@
 #define CONFIG_KSNET_SERDES_SGMII2_BASE		KS2_SGMII_SERDES2_BASE
 #define CONFIG_KSNET_SERDES_LANES_PER_SGMII	KS2_LANES_PER_SGMII_SERDES
 
-#define CONFIG_AEMIF_CNTRL_BASE		KS2_AEMIF_CNTRL_BASE
-
 /* I2C Configuration */
 #define CONFIG_SYS_DAVINCI_I2C_SPEED	100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE	0x10 /* SMBus host address */
@@ -121,8 +86,6 @@
 /* EEPROM definitions */
 
 /* NAND Configuration */
-#define CONFIG_KEYSTONE_RBL_NAND
-#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE	CONFIG_ENV_OFFSET
 #define CONFIG_SYS_NAND_MASK_CLE		0x4000
 #define CONFIG_SYS_NAND_MASK_ALE		0x2000
 #define CONFIG_SYS_NAND_CS			2