Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb,
  ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb.
- Add GICv3 support for ls1028a, ls2088a, ls1088a.
- Add lpuart support on ls1028aqds.
- Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based
  platforms.

7 files changed, 63 insertions, 27 deletions

diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index 6143e97..4d4c1a0 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -33,7 +33,8 @@
 #undef BOOT_TARGET_DEVICES
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
-	func(USB, usb, 0)
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
 #endif
 
 #undef FSL_QSPI_FLASH_SIZE
@@ -102,15 +103,6 @@
 			"env exists secureboot "	\
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"installer=load mmc 0:2 $load_addr "	\
-		   "/flex_installer_arm64.itb; "	\
-		   "bootm $load_addr#$BOARD\0"	\
-	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
-		"sf probe && sf read $load_addr "	\
-		"$kernel_addr $kernel_size; env exists secureboot "	\
-		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
-		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
-		"bootm $load_addr#$BOARD\0"	\
 	"sd_bootcmd=pfe stop; echo Trying load from sd card..;"		\
 		"mmcinfo; mmc read $load_addr "			\
 		"$kernel_addr_sd $kernel_size_sd ;"		\
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index a628985..45ce460 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -297,7 +297,8 @@
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
-	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 $othbootargs\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "	\
+		"cma=64M@0x0-0xb0000000\0" \
 	"initrd_high=0xffffffff\0"      \
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x65000000\0"	\
@@ -353,7 +354,8 @@
 		"$kernel_size && bootm $load_addr#$board\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
-	"bootargs=root=/dev/ram0 rw console=ttyS0,115200 $othbootargs\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyS0,115200 "	\
+		"cma=64M@0x0-0xb0000000\0" \
 	"initrd_high=0xffffffff\0"      \
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x61000000\0"	\
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 818b994..b910169 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -66,6 +66,13 @@
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 #endif
 
+/* LPUART */
+#ifdef CONFIG_LPUART
+#define CONFIG_LPUART_32B_REG
+#define CFG_LPUART_MUX_MASK	0xf0
+#define CFG_LPUART_EN		0xf0
+#endif
+
 /* SATA */
 #define CONFIG_SCSI_AHCI_PLAT
 
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index e80c299..24db23b 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -217,6 +217,10 @@
 #define LS1046A_BOOT_SRC_AND_HDR\
 	"boot_scripts=ls1046afrwy_boot.scr\0"	\
 	"boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
+#elif defined(CONFIG_TARGET_LS1046AQDS)
+#define LS1046A_BOOT_SRC_AND_HDR\
+	"boot_scripts=ls1046aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1046aqds_bs.out\0"
 #else
 #define LS1046A_BOOT_SRC_AND_HDR\
 	"boot_scripts=ls1046ardb_boot.scr\0"	\
@@ -230,7 +234,7 @@
 	"ramdisk_size=0x2000000\0"		\
 	"bootm_size=0x10000000\0"		\
 	"fdt_addr=0x64f00000\0"                 \
-	"kernel_addr=0x65000000\0"              \
+	"kernel_addr=0x61000000\0"              \
 	"scriptaddr=0x80000000\0"               \
 	"scripthdraddr=0x80080000\0"		\
 	"fdtheader_addr_r=0x80100000\0"         \
@@ -277,6 +281,18 @@
 		"&& sf read $kernelheader_addr_r $kernelheader_start "	\
 		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 		"bootm $load_addr#$board\0"		\
+	"nand_bootcmd=echo Trying load from nand..;"      \
+		"nand info; nand read $load_addr "         \
+		"$kernel_start $kernel_size; env exists secureboot "	\
+		"&& nand read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"		\
+	"nor_bootcmd=echo Trying load from nor..;"	\
+		"cp.b $kernel_addr $load_addr "		\
+		"$kernel_size; env exists secureboot "	\
+		"&& cp.b $kernelheader_addr $kernelheader_addr_r "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"	\
 	"sd_bootcmd=echo Trying load from SD ..;"	\
 		"mmcinfo; mmc read $load_addr "		\
 		"$kernel_addr_sd $kernel_size_sd && "	\
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 2a46c98..9ff248c 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -437,19 +437,27 @@ unsigned long get_board_ddr_clk(void);
 
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
-#define QSPI_NOR_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
-					"e0000 f00000 && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND		"mmc info; mmc read $kernel_load"     \
-					"$kernel_addr_sd $kernel_size_sd && bootm $kernel_load"
+#define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd"	\
+			   "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #else
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
-					"e0000 f00000 && bootm $kernel_load"
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #else
-#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #endif
 #endif
 
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index d47abf6..5ab9244 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -207,6 +207,16 @@ unsigned long get_board_ddr_clk(void);
 	"esbc_validate 0x80680000 ;"		\
 	"fsl_mc start mc 0x80a00000 0x80e00000\0"
 
+#define SD2_MC_INIT_CMD				\
+	"mmc dev 1; mmc read 0x80a00000 0x5000 0x1200;"	\
+	"mmc read 0x80e00000 0x7000 0x800;"	\
+	"env exists secureboot && "		\
+	"mmc read 0x80640000 0x3200 0x20 && "	\
+	"mmc read 0x80680000 0x3400 0x20 && "	\
+	"esbc_validate 0x80640000 && "		\
+	"esbc_validate 0x80680000 ;"		\
+	"fsl_mc start mc 0x80a00000 0x80e00000\0"
+
 #define EXTRA_ENV_SETTINGS			\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"ramdisk_addr=0x800000\0"		\
@@ -274,11 +284,11 @@ unsigned long get_board_ddr_clk(void);
 		"env exists secureboot && esbc_halt;"
 
 #define SD2_BOOTCOMMAND						\
-		"env exists mcinitcmd && mmcinfo; "		\
+		"mmc dev 1; env exists mcinitcmd && mmcinfo; "	\
 		"mmc read 0x80d00000 0x6800 0x800; "		\
 		"env exists mcinitcmd && env exists secureboot "	\
-		" && mmc read 0x80780000 0x3C00 0x20 "		\
-		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
+		" && mmc read 0x806C0000 0x3600 0x20 "		\
+		"&& esbc_validate 0x806C0000;env exists mcinitcmd "	\
 		"&& fsl_mc lazyapply dpl 0x80d00000;"		\
 		"run distro_bootcmd;run sd2_bootcmd;"		\
 		"env exists secureboot && esbc_halt;"
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
index b87346c..8857d50 100644
--- a/include/fsl_mdio.h
+++ b/include/fsl_mdio.h
@@ -53,6 +53,7 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
 		int regnum, u16 value);
 int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
 		int regnum);
+int memac_mdio_reset(struct mii_dev *bus);
 
 struct fsl_pq_mdio_info {
 	struct tsec_mii_mng __iomem *regs;