Merge git://git.denx.de/u-boot-marvell

9 files changed, 120 insertions, 49 deletions

diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h
index bcc2c20..2471266 100644
--- a/include/configs/SBx81LIFKW.h
+++ b/include/configs/SBx81LIFKW.h
@@ -109,11 +109,6 @@
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #endif /* CONFIG_CMD_NET */
 
-/*
- * Time settings
- */
-#define CONFIG_RTC_MV
-
 #define CONFIG_SYS_LOAD_ADDR  0x1000000      /* default location for tftp and bootm */
 
 #endif /* _CONFIG_SBX81LIFKW_H */
diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h
new file mode 100644
index 0000000..0491832
--- /dev/null
+++ b/include/configs/SBx81LIFXCAT.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
+ */
+
+#ifndef _CONFIG_SBX81LIFXCAT_H
+#define _CONFIG_SBX81LIFXCAT_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
+#define CONFIG_KW88F6281	1	/* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+#define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
+#define CONFIG_BUILD_TARGET	"u-boot.kwb"
+
+/* additions for new ARM relocation support */
+#define CONFIG_SYS_SDRAM_BASE	0x00000000
+
+#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
+#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
+#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
+#define CONFIG_KIRKWOOD_GPIO	1
+
+#define CONFIG_MISC_INIT_R		/* call misc_init_r */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
+#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
+
+#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
+#define MTDPARTS_MTDOOPS "errlog"
+#define CONFIG_DOS_PARTITION
+
+/*
+ *  Environment variables configurations
+ */
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		20000000	/* 20Mhz */
+#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SECT_SIZE		0x40000		/* 256K */
+#define CONFIG_ENV_SIZE			0x02000
+#define CONFIG_ENV_OFFSET		0xc0000		/* env starts here - 768K */
+
+/*
+ * U-Boot bootcode configuration
+ */
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for monitor */
+#define CONFIG_SYS_MALLOC_LEN		  (4 << 20)	/* Reserve 4.0 MB for malloc */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
+
+/* size in bytes reserved for initial data */
+
+#include <asm/arch/config.h>
+/* There is no PHY directly connected so don't ask it for link status */
+#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
+#define CONFIG_NR_DRAM_BANKS	4
+#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
+#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NETCONSOLE	/* include NetConsole support */
+#define CONFIG_NET_MULTI	/* specify more that one ports available */
+#define CONFIG_MII		/* expose smi over miiphy interface */
+#define CONFIG_MVGBE	/* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable a single port */
+#define CONFIG_PHY_BASE_ADR	0x01
+#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
+#endif /* CONFIG_CMD_NET */
+
+#define CONFIG_SYS_LOAD_ADDR  0x1000000      /* default location for tftp and bootm */
+
+#endif /* _CONFIG_SBX81LIFXCAT_H */
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 1141aee..7d56dfd 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -70,16 +70,6 @@
 	"initrd_high=0x10000000\0"
 
 /* SPL */
-/*
- * Select the boot device here
- *
- * Currently supported are:
- * SPL_BOOT_SPI_NOR_FLASH	- Booting via SPI NOR flash
- * SPL_BOOT_SDIO_MMC_CARD	- Booting via SDIO/MMC card (partition 1)
- */
-#define SPL_BOOT_SPI_NOR_FLASH		1
-#define SPL_BOOT_SDIO_MMC_CARD		2
-#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SDIO_MMC_CARD
 
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
@@ -96,13 +86,11 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
+#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI)
 /* SPL related SPI defines */
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
+#elif defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC)
 /* SPL related MMC defines */
 #define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
 #define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
diff --git a/include/configs/dns325.h b/include/configs/dns325.h
index 0d52ffb..8658c80 100644
--- a/include/configs/dns325.h
+++ b/include/configs/dns325.h
@@ -55,13 +55,6 @@
 #endif
 
 /*
- * RTC driver configuration
- */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif
-
-/*
  * Enable GPI0 support
  */
 #define CONFIG_KIRKWOOD_GPIO
diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h
index 29e104f..1d69a4e 100644
--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
@@ -93,11 +93,4 @@
 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 #endif /*CONFIG_MVSATA_IDE*/
 
-/*
- *  * RTC driver configuration
- *   */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif /* CONFIG_CMD_DATE */
-
 #endif /* _CONFIG_GOFLEXHOME_H */
diff --git a/include/configs/mv-plug-common.h b/include/configs/mv-plug-common.h
index 81c07a8..f424e2c 100644
--- a/include/configs/mv-plug-common.h
+++ b/include/configs/mv-plug-common.h
@@ -22,11 +22,4 @@
  */
 #include "mv-common.h"
 
-/*
- * RTC driver configuration
- */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif /* CONFIG_CMD_DATE */
-
 #endif /* _CONFIG_MARVELL_PLUG_H */
diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
index d133109..5015bc7 100644
--- a/include/configs/mvebu_armada-37xx.h
+++ b/include/configs/mvebu_armada-37xx.h
@@ -66,6 +66,8 @@
 #define CONFIG_SF_DEFAULT_SPEED		1000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS		/* required for UBI partition support */
 
 /* Environment in SPI NOR flash */
 #define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
diff --git a/include/configs/nas220.h b/include/configs/nas220.h
index b37705e..ca5cb2a 100644
--- a/include/configs/nas220.h
+++ b/include/configs/nas220.h
@@ -107,13 +107,6 @@
  * EFI partition
  */
 
-/*
- *  Date Time
- */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif /* CONFIG_CMD_DATE */
-
 #define CONFIG_KIRKWOOD_GPIO
 
 #endif /* _CONFIG_NAS220_H */
diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 9d4d0df..44d5016 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -93,13 +93,13 @@
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 
-#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_SPI
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
 /* SPL related SPI defines */
 # define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
 # define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
 #endif
 
-#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_MMC
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
 /* SPL related MMC defines */
 # define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
 # define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS