Merge tag 'tegra-for-2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-tegraWIP/18Aug2023

ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and
has some other minor enhancements, such as enabling the poweroff command
on several Tegra210 and Tegra186 boards.

6 files changed, 343 insertions, 5 deletions

diff --git a/include/configs/endeavoru.h b/include/configs/endeavoru.h
new file mode 100644
index 0000000..46c582e
--- /dev/null
+++ b/include/configs/endeavoru.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  (C) Copyright 2010,2012
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ *  (C) Copyright 2022
+ *  Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING		"HTC One X"
+
+#define ENDEAVORU_FLASH_UBOOT \
+	"flash_uboot=echo Preparing RAM;" \
+		"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+		"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+		"echo Reading BCT;" \
+		"mmc dev 0 1;" \
+		"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+		"echo Reading bootloader;" \
+		"if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
+		"then echo Calculating bootloader size;" \
+			"size mmc 0:1 ${bootloader_file};" \
+			"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+			"echo Writing bootloader to eMMC;" \
+			"mmc dev 0 1;" \
+			"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+			"mmc dev 0 2;" \
+			"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+			"echo Bootloader written successfully;" \
+			"pause 'Press ANY key to reboot device...'; reset;" \
+		"else echo Reading bootloader failed;" \
+			"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define ENDEAVORU_BOOTMENU \
+	ENDEAVORU_FLASH_UBOOT \
+	"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+	"bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+	"bootmenu_2=update bootloader=run flash_uboot\0" \
+	"bootmenu_3=reboot RCM=enterrcm\0" \
+	"bootmenu_4=reboot=reset\0" \
+	"bootmenu_5=power off=poweroff\0" \
+	"bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	"boot_block_size_r=0x200000\0" \
+	"boot_block_size=0x1000\0" \
+	"bootloader_file=u-boot-dtb-tegra.bin\0" \
+	"check_button=gpio input 179; test $? -eq 0\0" \
+	"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+	ENDEAVORU_BOOTMENU
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/grouper.h b/include/configs/grouper.h
new file mode 100644
index 0000000..93304dd
--- /dev/null
+++ b/include/configs/grouper.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING		"ASUS Google Nexus 7 (2012)"
+
+#define GROUPER_FLASH_UBOOT \
+	"flash_uboot=echo Preparing RAM;" \
+		"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+		"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+		"echo Reading BCT;" \
+		"mmc dev 0 1;" \
+		"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+		"echo Reading bootloader;" \
+		"if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
+		"then echo Calculating bootloader size;" \
+			"size mmc 0:1 ${bootloader_file};" \
+			"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+			"echo Writing bootloader to eMMC;" \
+			"mmc dev 0 1;" \
+			"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+			"mmc dev 0 2;" \
+			"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+			"echo Bootloader written successfully;" \
+			"pause 'Press ANY key to reboot device...'; reset;" \
+		"else echo Reading bootloader failed;" \
+			"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define GROUPER_BOOTMENU \
+	GROUPER_FLASH_UBOOT \
+	"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+	"bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+	"bootmenu_2=update bootloader=run flash_uboot\0" \
+	"bootmenu_3=reboot RCM=enterrcm\0" \
+	"bootmenu_4=reboot=reset\0" \
+	"bootmenu_5=power off=poweroff\0" \
+	"bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	"boot_block_size_r=0x200000\0" \
+	"boot_block_size=0x1000\0" \
+	"bootloader_file=u-boot-dtb-tegra.bin\0" \
+	"check_button=gpio input 131; test $? -eq 0;\0" \
+	"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+	GROUPER_BOOTMENU
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 991ffbb..0d0965e 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -8,9 +8,21 @@
 #define __TEGRA_COMMON_POST_H
 
 #if IS_ENABLED(CONFIG_CMD_USB)
-# define BOOT_TARGET_USB(func) func(USB, usb, 0)
+#define BOOT_TARGET_USB(func) func(USB, usb, 0)
 #else
-# define BOOT_TARGET_USB(func)
+#define BOOT_TARGET_USB(func)
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_DHCP) && CONFIG_IS_ENABLED(CMD_PXE)
+#define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
+#else
+#define BOOT_TARGET_PXE(func)
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_DHCP)
+#define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define BOOT_TARGET_DHCP(func)
 #endif
 
 #ifndef BOOT_TARGET_DEVICES
@@ -18,8 +30,8 @@
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
 	BOOT_TARGET_USB(func) \
-	func(PXE, pxe, na) \
-	func(DHCP, dhcp, na)
+	BOOT_TARGET_PXE(func) \
+	BOOT_TARGET_DHCP(func)
 #endif
 #include <config_distro_bootcmd.h>
 
@@ -35,6 +47,12 @@
 #define STDIN_KBD_USB ""
 #endif
 
+#ifdef CONFIG_BUTTON_KEYBOARD
+#define STDIN_BTN_KBD ",button-kbd"
+#else
+#define STDIN_BTN_KBD ""
+#endif
+
 #ifdef CONFIG_VIDEO
 #define STDOUT_VIDEO ",vidconsole"
 #else
@@ -48,7 +66,7 @@
 #endif
 
 #define TEGRA_DEVICE_SETTINGS \
-	"stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB STDOUT_CROS_EC "\0" \
+	"stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB STDOUT_CROS_EC STDIN_BTN_KBD "\0" \
 	"stdout=serial" STDOUT_VIDEO "\0" \
 	"stderr=serial" STDOUT_VIDEO "\0" \
 	""
diff --git a/include/configs/transformer-common.h b/include/configs/transformer-common.h
new file mode 100644
index 0000000..dcdda1e
--- /dev/null
+++ b/include/configs/transformer-common.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022, Svyatoslav Ryhel <clamor95@gmail.com>.
+ */
+
+#ifndef __TRANSFORMER_COMMON_H
+#define __TRANSFORMER_COMMON_H
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING		"ASUS Transformer"
+
+#define TRANSFORMER_FLASH_UBOOT \
+	"flash_uboot=echo Preparing RAM;" \
+		"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+		"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+		"echo Reading BCT;" \
+		"mmc dev 0 1;" \
+		"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+		"echo Reading bootloader;" \
+		"if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
+		"then echo Calculating bootloader size;" \
+			"size mmc 1:1 ${bootloader_file};" \
+			"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+			"echo Writing bootloader to eMMC;" \
+			"mmc dev 0 1;" \
+			"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+			"mmc dev 0 2;" \
+			"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+			"echo Bootloader written successfully;" \
+			"pause 'Press ANY key to reboot device...'; reset;" \
+		"else echo Reading bootloader failed;" \
+			"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define TRANSFORMER_FLASH_SPI \
+	"update_spi=sf probe 0:1;" \
+		"echo Dumping current SPI flash content ...;" \
+		"sf read ${kernel_addr_r} 0x0 ${spi_size};" \
+		"if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};" \
+		"then echo SPI flash content was successfully written into spi-flash-backup.bin;" \
+			"echo Reading SPI flash binary;" \
+			"if load mmc 1:1 ${kernel_addr_r} repart-block.bin;" \
+			"then echo Writing bootloader into SPI flash;" \
+				"sf probe 0:1;" \
+				"sf update ${kernel_addr_r} 0x0 ${spi_size};" \
+				"poweroff;" \
+			"else echo Preparing RAM;" \
+				"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+				"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+				"echo Reading BCT;" \
+				"sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
+				"echo Reading bootloader;" \
+				"if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
+				"then echo Calculating bootloader size;" \
+					"size mmc 1:1 ${bootloader_file};" \
+					"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+					"echo Writing bootloader into SPI flash;" \
+					"sf probe 0:1;" \
+					"sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
+					"sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};" \
+					"echo Bootloader written successfully; poweroff;" \
+				"else echo Reading bootloader failed;" \
+					"poweroff; fi;" \
+			"fi;" \
+		"else echo SPI flash backup FAILED! Aborting ...;" \
+			"poweroff; fi\0"
+
+#define TRANSFORMER_REFRESH_USB \
+	"refresh_usb=usb start; usb reset; usb tree; usb info;" \
+		"pause 'Press ANY key to return to bootmenu...'; bootmenu\0"
+
+#define TRANSFORMER_BOOTMENU \
+	TRANSFORMER_FLASH_UBOOT \
+	TRANSFORMER_FLASH_SPI \
+	TRANSFORMER_REFRESH_USB \
+	"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+	"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
+	"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+	"bootmenu_3=update bootloader=run flash_uboot\0" \
+	"bootmenu_4=refresh USB=run refresh_usb\0" \
+	"bootmenu_5=reboot RCM=enterrcm\0" \
+	"bootmenu_6=reboot=reset\0" \
+	"bootmenu_7=power off=poweroff\0" \
+	"bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	"spi_size=0x400000\0" \
+	"boot_block_size_r=0x200000\0" \
+	"boot_block_size=0x1000\0" \
+	"check_button=gpio input ${gpio_button}; test $? -eq 0;\0" \
+	"bootloader_file=u-boot-dtb-tegra.bin\0" \
+	"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+	TRANSFORMER_BOOTMENU
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/transformer-t30.h b/include/configs/transformer-t30.h
new file mode 100644
index 0000000..d2a16f12
--- /dev/null
+++ b/include/configs/transformer-t30.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  (C) Copyright 2010,2012
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ *  (C) Copyright 2022
+ *  Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+#include "transformer-common.h"
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/x3-t30.h b/include/configs/x3-t30.h
new file mode 100644
index 0000000..d29ea70
--- /dev/null
+++ b/include/configs/x3-t30.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  (C) Copyright 2010,2012
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ *  (C) Copyright 2022
+ *  Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+
+#define CFG_TEGRA_BOARD_STRING		"LG X3 Board"
+
+#ifdef CONFIG_DEVICE_P880
+/* High-level configuration options */
+#undef CFG_TEGRA_BOARD_STRING
+#define CFG_TEGRA_BOARD_STRING		"LG Optimus 4X HD"
+#endif
+
+#ifdef CONFIG_DEVICE_P895
+/* High-level configuration options */
+#undef CFG_TEGRA_BOARD_STRING
+#define CFG_TEGRA_BOARD_STRING		"LG Optimus Vu"
+#endif
+
+#define X3_FLASH_UBOOT \
+	"flash_uboot=echo Preparing RAM;" \
+		"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+		"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+		"echo Reading BCT;" \
+		"mmc dev 0 1;" \
+		"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+		"echo Reading bootloader;" \
+		"if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
+		"then echo Calculating bootloader size;" \
+			"size mmc 0:1 ${bootloader_file};" \
+			"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+			"echo Writing bootloader to eMMC;" \
+			"mmc dev 0 1;" \
+			"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+			"mmc dev 0 2;" \
+			"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+			"echo Bootloader written successfully;" \
+			"pause 'Press ANY key to reboot device...'; reset;" \
+		"else echo Reading bootloader failed;" \
+			"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define X3_BOOTMENU \
+	X3_FLASH_UBOOT \
+	"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+	"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
+	"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+	"bootmenu_3=update bootloader=run flash_uboot\0" \
+	"bootmenu_4=reboot RCM=enterrcm\0" \
+	"bootmenu_5=reboot=reset\0" \
+	"bootmenu_6=power off=poweroff\0" \
+	"bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	"boot_block_size_r=0x200000\0" \
+	"boot_block_size=0x1000\0" \
+	"bootloader_file=u-boot-dtb-tegra.bin\0" \
+	"check_button=gpio input 116; test $? -eq 0\0" \
+	"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+	X3_BOOTMENU
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */