diff options
author | Robert Beckett <bob.beckett@collabora.com> | 2020-01-31 15:08:01 +0200 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2020-02-09 21:47:20 +0100 |
commit | a707281a00f9289175d48c426c3125d63edcc609 (patch) | |
tree | 04dd9e47cc440897fbb83cc1ab3c931df9a1ffb7 /include | |
parent | 2d1ea19b551023bfd14629cdf38718c8e7e57f26 (diff) | |
download | u-boot-a707281a00f9289175d48c426c3125d63edcc609.zip u-boot-a707281a00f9289175d48c426c3125d63edcc609.tar.gz u-boot-a707281a00f9289175d48c426c3125d63edcc609.tar.bz2 |
board: ge: bx50v3: use DM for uart
Remove legacy uart pad and iomux code
Enable DM serial and mxc uart
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/ge_bx50v3.h | 10 |
1 files changed, 2 insertions, 8 deletions
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 46a3c38..98ef71d 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -16,9 +16,6 @@ #define CONFIG_BOARD_NAME "General Electric Bx50v3" -#define CONFIG_MXC_UART_BASE UART3_BASE -#define CONSOLE_DEV "ttymxc2" - #include "mx6_common.h" #include <linux/sizes.h> @@ -28,8 +25,6 @@ #define CONFIG_REVISION_TAG #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) -#define CONFIG_MXC_UART - /* SATA Configs */ #ifdef CONFIG_CMD_SATA #define CONFIG_SYS_SATA_MAX_DEVICE 1 @@ -64,7 +59,7 @@ "setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \ "setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \ "setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \ - "setenv bootargs $bootargs cma=128M bootcause=POR console=${console} ${videoargs} " \ + "setenv bootargs $bootargs cma=128M bootcause=POR ${videoargs} " \ "setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \ "setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \ "networkboot=" \ @@ -89,11 +84,10 @@ "devnum=2\0" \ "rootdev=mmcblk0p\0" \ "quiet=quiet loglevel=0\0" \ - "console=" CONSOLE_DEV "\0" \ "setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \ "ro rootwait cma=128M " \ "bootcause=${bootcause} " \ - "${quiet} console=${console} " \ + "${quiet} " \ "${videoargs}" "\0" \ "doquiet=" \ "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \ |