diff options
| author | Tom Rini <trini@konsulko.com> | 2022-04-04 10:45:33 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2022-04-04 10:48:44 -0400 |
| commit | 01f1ab67f38882dc7665a0a6eca4bbeba6d84f81 (patch) | |
| tree | 31b1febefe82731d94571f7442877c039efb602c /include | |
| parent | e4b6ebd3de982ae7185dbf689a030e73fd06e0d2 (diff) | |
| parent | 8221c52d88fbe84ca9692dc23827e21403c952e8 (diff) | |
| download | u-boot-01f1ab67f38882dc7665a0a6eca4bbeba6d84f81.zip u-boot-01f1ab67f38882dc7665a0a6eca4bbeba6d84f81.tar.gz u-boot-01f1ab67f38882dc7665a0a6eca4bbeba6d84f81.tar.bz2 | |
Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include')
383 files changed, 1005 insertions, 3366 deletions
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index c2f8fad..beb8bb9 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -20,6 +20,7 @@ */ #ifndef __ASSEMBLY__ +#include <event_internal.h> #include <fdtdec.h> #include <membuff.h> #include <linux/list.h> @@ -66,7 +67,7 @@ struct global_data { * @mem_clk: memory clock rate in Hz */ unsigned long mem_clk; -#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO) +#if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO) /** * @fb_base: base address of frame buffer memory */ @@ -467,6 +468,12 @@ struct global_data { */ char *smbios_version; #endif +#if CONFIG_IS_ENABLED(EVENT) + /** + * @event_state: Points to the current state of events + */ + struct event_state event_state; +#endif }; #ifndef DO_DEPS_ONLY static_assert(sizeof(struct global_data) == GD_SIZE); @@ -532,6 +539,12 @@ static_assert(sizeof(struct global_data) == GD_SIZE); #define gd_set_multi_dtb_fit(_dtb) #endif +#if CONFIG_IS_ENABLED(EVENT_DYNAMIC) +#define gd_event_state() ((struct event_state *)&gd->event_state) +#else +#define gd_event_state() NULL +#endif + /** * enum gd_flags - global data flags * diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index 637de0c..1becc66 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -52,12 +52,6 @@ struct bd_info { unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ -#if defined(CONFIG_CPM2) - unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ - unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ - unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ - unsigned long bi_vco; /* VCO Out from PLL, in MHz */ -#endif #if defined(CONFIG_M68K) unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif diff --git a/include/clk-uclass.h b/include/clk-uclass.h index e44f1ca..65ebff9 100644 --- a/include/clk-uclass.h +++ b/include/clk-uclass.h @@ -32,7 +32,7 @@ struct clk_ops { int (*of_xlate)(struct clk *clock, struct ofnode_phandle_args *args); int (*request)(struct clk *clock); - int (*rfree)(struct clk *clock); + void (*rfree)(struct clk *clock); ulong (*round_rate)(struct clk *clk, ulong rate); ulong (*get_rate)(struct clk *clk); ulong (*set_rate)(struct clk *clk, ulong rate); @@ -81,11 +81,9 @@ int request(struct clk *clock); * rfree() - Free a previously requested clock. * @clock: The clock to free. * - * This is the implementation of the client clk_free() API. - * - * Return: 0 if OK, or a negative error code. + * Free any resources allocated in request(). */ -int rfree(struct clk *clock); +void rfree(struct clk *clock); /** * round_rate() - Adjust a rate to the exact rate a clock can provide. diff --git a/include/clk.h b/include/clk.h index 23e4d4e..76bb64b 100644 --- a/include/clk.h +++ b/include/clk.h @@ -414,9 +414,9 @@ int clk_request(struct udevice *dev, struct clk *clk); * @clk: A clock struct that was previously successfully requested by * clk_request/get_by_*(). * - * Return: 0 if OK, or a negative error code. + * Free resources allocated by clk_request() (or any clk_get_* function). */ -int clk_free(struct clk *clk); +void clk_free(struct clk *clk); /** * clk_get_rate() - Get current clock rate. @@ -562,9 +562,9 @@ static inline int clk_request(struct udevice *dev, struct clk *clk) return -ENOSYS; } -static inline int clk_free(struct clk *clk) +static inline void clk_free(struct clk *clk) { - return 0; + return; } static inline ulong clk_get_rate(struct clk *clk) diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h index af7e3e4..a59b9bb 100644 --- a/include/config_uncmd_spl.h +++ b/include/config_uncmd_spl.h @@ -13,7 +13,6 @@ #ifndef CONFIG_SPL_DM #undef CONFIG_DM_SERIAL #undef CONFIG_DM_I2C -#undef CONFIG_DM_SPI #endif #undef CONFIG_DM_STDIO diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h index 3b4d1fd..9b4f5fc 100644 --- a/include/configs/10m50_devboard.h +++ b/include/configs/10m50_devboard.h @@ -23,15 +23,8 @@ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* - * NET options - */ -#define CONFIG_SYS_RX_ETH_BUFFER 0 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -/* * BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE /* * MEMORY ORGANIZATION @@ -43,8 +36,5 @@ #define CONFIG_SYS_SDRAM_SIZE 0x08000000 #define CONFIG_MONITOR_IS_IN_RAM #define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_SDRAM_SIZE - \ - CONFIG_SYS_MONITOR_LEN) #endif /* __CONFIG_H */ diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h index 763cb8d..9db0f0e 100644 --- a/include/configs/3c120_devboard.h +++ b/include/configs/3c120_devboard.h @@ -23,17 +23,6 @@ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* - * NET options - */ -#define CONFIG_SYS_RX_ETH_BUFFER 0 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* * MEMORY ORGANIZATION * -Monitor at top of sdram. * -The heap is placed below the monitor @@ -43,8 +32,5 @@ #define CONFIG_SYS_SDRAM_SIZE 0x08000000 #define CONFIG_MONITOR_IS_IN_RAM #define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_SDRAM_SIZE - \ - CONFIG_SYS_MONITOR_LEN) #endif /* __CONFIG_H */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index e6f4255..275fb56 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -18,25 +18,14 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 #ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_HAS_ETH1 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif -/* Timer */ -#define CONFIG_MCFTMR - /* I2C */ #ifdef CONFIG_MCFFEC @@ -92,7 +81,6 @@ #define CONFIG_SYS_SDRAM_EMOD 0x80010000 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 9f4c3af..13743da 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -22,37 +22,21 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - #ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif -/* Timer */ -#define CONFIG_MCFTMR - /* I2C */ #define CONFIG_SYS_I2C_PINMUX_REG (gpio->par_qspi) #define CONFIG_SYS_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) #define CONFIG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) /* this must be included AFTER the definition of CONFIG COMMANDS (if any) */ -#define CONFIG_BOOTFILE "u-boot.bin" #ifdef CONFIG_MCFFEC # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 @@ -102,7 +86,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 @@ -121,7 +104,7 @@ */ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ -#ifdef NORFLASH_PS32BIT +#ifdef CONFIG_NORFLASH_PS32BIT # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT #else # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT @@ -168,7 +151,7 @@ * CS6 - Available * CS7 - Available */ -#ifdef NORFLASH_PS32BIT +#ifdef CONFIG_NORFLASH_PS32BIT # define CONFIG_SYS_CS0_BASE 0xFFC00000 # define CONFIG_SYS_CS0_MASK 0x003f0001 # define CONFIG_SYS_CS0_CTRL 0x00001D00 diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 3267149..f68eb97 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -17,18 +17,12 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCFTMR #define CONFIG_SYS_UART_PORT (0) #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ /* - * BOOTP options - */ -#undef CONFIG_BOOTP_BOOTFILESIZE - -/* * Clock configuration: enable only one of the following options */ @@ -70,8 +64,6 @@ #define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ #endif -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) - #define CONFIG_SYS_MONITOR_LEN 0x20000 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index c27f0a5..b7fdd71 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -8,8 +8,6 @@ #include <linux/stringify.h> -#define CONFIG_MCFTMR - #define CONFIG_SYS_UART_PORT (0) @@ -93,12 +91,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#ifdef CONFIG_MONITOR_IS_IN_RAM -# define CONFIG_SYS_MONITOR_BASE 0x20000 -#else -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - #define CONFIG_SYS_MONITOR_LEN 0x40000 #define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index df89a0f..b891868 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -16,7 +16,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCFTMR #define CONFIG_SYS_UART_PORT (0) @@ -32,24 +31,12 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text); -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - #ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif @@ -101,12 +88,6 @@ #define CONFIG_SYS_SDRAM_SIZE 4 /* SDRAM size in MB */ #define CONFIG_SYS_FLASH_BASE 0xffe00000 -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - #define CONFIG_SYS_MONITOR_LEN 0x20000 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 7926ed4..68e3c89 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -21,8 +21,6 @@ * (easy to change) */ -#define CONFIG_MCFTMR - #define CONFIG_SYS_UART_PORT (0) /* Configuration for environment @@ -33,27 +31,14 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text); -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* Available command configuration */ #ifdef CONFIG_MCFFEC -#define CONFIG_MII_INIT 1 #define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_HAS_ETH1 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ #ifndef CONFIG_SYS_DISCOVER_PHY #define FECDUPLEX FULL #define FECSPEED _100BASET -#else -#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#endif #endif #endif @@ -63,7 +48,6 @@ #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) #ifdef CONFIG_MCFFEC -# define CONFIG_NET_RETRY_COUNT 5 # define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ @@ -106,12 +90,6 @@ #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - #define CONFIG_SYS_MONITOR_LEN 0x20000 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index df95eea..b6e569d 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -16,7 +16,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCFTMR #define CONFIG_SYS_UART_PORT (0) @@ -30,24 +29,12 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text*); -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - #ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif @@ -104,14 +91,6 @@ #define CONFIG_SYS_INT_FLASH_BASE 0xf0000000 #define CONFIG_SYS_INT_FLASH_ENABLE 0x21 -/* If M5282 port is fully implemented the monitor base will be behind - * the vector table. */ -#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ -#endif - #define CONFIG_SYS_MONITOR_LEN 0x20000 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index ec70186..34b5ceb 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -25,33 +25,20 @@ #define CONFIG_SYS_UNIFY_CACHE #ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 # define CONFIG_SYS_TX_ETH_BUFFER 8 # define CONFIG_SYS_FEC_BUF_USE_SRAM -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_HAS_ETH1 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif -#define CONFIG_MCFRTC -#undef RTC_DEBUG #define CONFIG_SYS_RTC_CNT (0x8000) #define CONFIG_SYS_RTC_SETUP (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN) -/* Timer */ -#define CONFIG_MCFTMR - /* I2C */ #ifdef CONFIG_MCFFEC @@ -108,7 +95,6 @@ #define CONFIG_SYS_SDRAM_EMOD 0x80010000 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 865d23c..673b0dc 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -25,27 +25,14 @@ #define CONFIG_SYS_UNIFY_CACHE #ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif -#define CONFIG_MCFRTC -#undef RTC_DEBUG - -/* Timer */ -#define CONFIG_MCFTMR - /* I2C */ #ifdef CONFIG_MCFFEC @@ -104,7 +91,6 @@ #define CONFIG_SYS_SDRAM_EMOD 0x40010000 #define CONFIG_SYS_SDRAM_MODE 0x018D0000 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 @@ -126,7 +112,7 @@ # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ #endif -#ifdef CONFIG_NANDFLASH_SIZE +#ifdef CONFIG_CMD_NAND # define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE # define CONFIG_SYS_NAND_SIZE 1 @@ -178,9 +164,9 @@ #define CONFIG_SYS_CS1_MASK 0x001f0001 #define CONFIG_SYS_CS1_CTRL 0x002A3780 -#ifdef CONFIG_NANDFLASH_SIZE +#ifdef CONFIG_CMD_NAND #define CONFIG_SYS_CS2_BASE 0x20000000 -#define CONFIG_SYS_CS2_MASK ((CONFIG_NANDFLASH_SIZE << 20) | 1) +#define CONFIG_SYS_CS2_MASK (16 << 20) #define CONFIG_SYS_CS2_CTRL 0x00001f60 #endif diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index ca13c8c..4c9fc43 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -27,27 +27,14 @@ #define CONFIG_SYS_UNIFY_CACHE #ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif -#define CONFIG_MCFRTC -#undef RTC_DEBUG - -/* Timer */ -#define CONFIG_MCFTMR - /* I2C */ #ifdef CONFIG_MCFFEC @@ -106,7 +93,6 @@ #define CONFIG_SYS_SDRAM_EMOD 0x40010000 #define CONFIG_SYS_SDRAM_MODE 0x018D0000 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 @@ -128,13 +114,11 @@ # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ #endif -#ifdef CONFIG_NANDFLASH_SIZE # define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 -#endif #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE @@ -180,10 +164,8 @@ #define CONFIG_SYS_CS1_MASK 0x001f0001 #define CONFIG_SYS_CS1_CTRL 0x002A3780 -#ifdef CONFIG_NANDFLASH_SIZE #define CONFIG_SYS_CS2_BASE 0x20000000 -#define CONFIG_SYS_CS2_MASK ((CONFIG_NANDFLASH_SIZE << 20) | 1) +#define CONFIG_SYS_CS2_MASK (16 << 20) #define CONFIG_SYS_CS2_CTRL 0x00001f60 -#endif #endif /* _M5373EVB_H */ diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h index 4a26ae8..01b33c7 100644 --- a/include/configs/MCR3000.h +++ b/include/configs/MCR3000.h @@ -80,7 +80,6 @@ */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) #define CONFIG_SYS_MONITOR_LEN (320 << 10) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Environment Configuration */ @@ -88,7 +87,6 @@ /* Ethernet configuration part */ #define CONFIG_SYS_DISCOVER_PHY 1 -#define CONFIG_MII_INIT 1 /* NAND configuration part */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 538d9c2..4c4d2c0 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -13,7 +13,6 @@ /* * High Level Configuration Options */ -#define CONFIG_E300 1 /* E300 family */ #define CONFIG_HWCONFIG @@ -127,7 +126,6 @@ /* * The reserved memory */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_RAMBOOT @@ -250,7 +248,6 @@ #define CONFIG_TSEC1 #ifdef CONFIG_TSEC1 -#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 2 @@ -259,17 +256,12 @@ #endif #ifdef CONFIG_TSEC2 -#define CONFIG_HAS_ETH1 #define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_SYS_TSEC2_OFFSET 0x25000 #define TSEC2_PHY_ADDR 0x1c #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define TSEC2_PHYIDX 0 #endif - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC0" - #endif /* @@ -295,11 +287,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR @@ -329,7 +316,6 @@ #define CONFIG_HOSTNAME "mpc837x_rdb" #define CONFIG_ROOTPATH "/nfsroot" #define CONFIG_RAMDISKFILE "rootfs.ext2.gz.uboot" -#define CONFIG_BOOTFILE "uImage" /* U-Boot image on TFTP server */ #define CONFIG_UBOOTPATH "u-boot.bin" #define CONFIG_FDTFILE "mpc8379_rdb.dtb" diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h deleted file mode 100644 index 57097b1..0000000 --- a/include/configs/MPC8540ADS.h +++ /dev/null @@ -1,303 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2004, 2011 Freescale Semiconductor. - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - */ - -/* - * mpc8540ads board configuration file - * - * Please refer to doc/README.mpc85xx for more info. - * - * Make sure you change the MAC address and other network params first, - * search for CONFIG_SERVERIP, etc in this file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * default CCARBAR is at 0xff700000 - * assume U-Boot is less than 0.5MB - */ - -#ifndef CONFIG_HAS_FEC -#define CONFIG_HAS_FEC 1 /* 8540 has FEC */ -#endif - -/* - * sysclk for MPC85xx - * - * Two valid values are: - * 33000000 - * 66000000 - * - * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz - * is likely the desired value here, so that is now the default. - * The board, however, can run at 66MHz. In any event, this value - * must match the settings of some switches. Details can be found - * in the README.mpc85xxads. - * - * XXX -- Can't we run at 66 MHz, anyway? PCI should drop to - * 33MHz to accommodate, based on a PCI pin. - * Note that PCI-X won't work at 33MHz. - */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 128 /* DDR is 128MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 /* 0-128MB */ -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000002 -#define CONFIG_SYS_DDR_TIMING_1 0x37344321 -#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ -#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ -#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ -#define CONFIG_SYS_DDR_INTERVAL 0x05200100 /* autocharge,no open page */ - -/* - * SDRAM on the Local Bus - */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ - -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* - * Local Bus Definitions - */ - -/* - * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. - * - * For BR2, need: - * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 - * port-size = 32-bits = BR2[19:20] = 11 - * no parity checking = BR2[21:22] = 00 - * SDRAM for MSEL = BR2[24:26] = 011 - * Valid = BR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 - * - * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into - * FIXME: the top 17 bits of BR2. - */ - -/* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. - * - * For OR2, need: - * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 - * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 - * EAD set for extra time OR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 - */ - -#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/ - -#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_BSMA1516 \ - | LSDMR_RFCR5 \ - | LSDMR_PRETOACT3 \ - | LSDMR_ACTTORW3 \ - | LSDMR_BL8 \ - | LSDMR_WRC2 \ - | LSDMR_CL3 \ - | LSDMR_RFEN \ - ) - -/* - * SDRAM Controller configuration sequence. - */ -#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) -#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) -#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) - -/* - * 32KB, 8-bit wide for ADS config reg - */ -#define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ - -/* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* - * I2C - */ -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* RapidIO MMU */ -#define CONFIG_SYS_RIO_MEM_VIRT 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_BUS 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_PHYS 0xc0000000 -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 -#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */ - -#if defined(CONFIG_PCI) - -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ -#endif - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT - -#if CONFIG_HAS_FEC -#define CONFIG_MPC85XX_FEC 1 -#define CONFIG_MPC85XX_FEC_NAME "FEC" -#define FEC_PHY_ADDR 3 -#define FEC_PHYIDX 0 -#define FEC_FLAGS 0 -#endif - -/* Options are: TSEC[0-1], FEC */ -#define CONFIG_ETHPRIME "TSEC0" - -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Miscellaneous configurable options - */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#endif - -#define CONFIG_IPADDR 192.168.1.253 - -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/nfsroot" -#define CONFIG_BOOTFILE "your.uImage" - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=1000000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=your.fdt.dtb\0" - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index e16d870..3467a51 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -30,7 +30,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ /* * Only possible on E500 Version 2 or newer cores. @@ -49,7 +48,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ @@ -138,8 +136,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_HWCONFIG /* enable hwconfig */ @@ -326,14 +322,6 @@ #endif #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ -#ifdef CONFIG_LEGACY -#define BRIDGE_ID 17 -#define VIA_ID 2 -#else -#define BRIDGE_ID 28 -#define VIA_ID 4 -#endif - #if defined(CONFIG_PCI) #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ @@ -363,9 +351,6 @@ #define TSEC2_FLAGS TSEC_GIGABIT #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -/* Options are: eTSEC[0-3] */ -#define CONFIG_ETHPRIME "eTSEC0" #endif /* CONFIG_TSEC_ENET */ /* @@ -376,11 +361,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* * Miscellaneous configurable options */ @@ -395,18 +375,11 @@ /* * Environment Configuration */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#endif #define CONFIG_IPADDR 192.168.1.253 #define CONFIG_HOSTNAME "unknown" #define CONFIG_ROOTPATH "/nfsroot" -#define CONFIG_BOOTFILE "8548cds/uImage.uboot" #define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ #define CONFIG_SERVERIP 192.168.1.1 diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h deleted file mode 100644 index d23cf0e..0000000 --- a/include/configs/MPC8560ADS.h +++ /dev/null @@ -1,292 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2004, 2011 Freescale Semiconductor. - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - */ - -/* - * mpc8560ads board configuration file - * - * Please refer to doc/README.mpc85xx for more info. - * - * Make sure you change the MAC address and other network params first, - * search for CONFIG_SERVERIP, etc. in this file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <linux/delay.h> - -/* High Level Configuration Options */ -#define CONFIG_CPM2 1 /* has CPM2 */ - -/* - * default CCARBAR is at 0xff700000 - * assume U-Boot is less than 0.5MB - */ - -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -/* - * sysclk for MPC85xx - * - * Two valid values are: - * 33000000 - * 66000000 - * - * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz - * is likely the desired value here, so that is now the default. - * The board, however, can run at 66MHz. In any event, this value - * must match the settings of some switches. Details can be found - * in the README.mpc85xxads. - */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ - -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 128 /* DDR is 128MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 /* 0-128MB */ -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000002 -#define CONFIG_SYS_DDR_TIMING_1 0x37344321 -#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ -#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ -#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ -#define CONFIG_SYS_DDR_INTERVAL 0x05200100 /* autocharge,no open page */ - -/* - * SDRAM on the Local Bus - */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ - -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* - * Local Bus Definitions - */ - -/* - * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. - * - * For BR2, need: - * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 - * port-size = 32-bits = BR2[19:20] = 11 - * no parity checking = BR2[21:22] = 00 - * SDRAM for MSEL = BR2[24:26] = 011 - * Valid = BR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 - * - * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into - * FIXME: the top 17 bits of BR2. - */ - -/* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. - * - * For OR2, need: - * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 - * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 - * EAD set for extra time OR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 - */ - -#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/ - -#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_BSMA1516 \ - | LSDMR_RFCR5 \ - | LSDMR_PRETOACT3 \ - | LSDMR_ACTTORW3 \ - | LSDMR_BL8 \ - | LSDMR_WRC2 \ - | LSDMR_CL3 \ - | LSDMR_RFEN \ - ) - -/* - * SDRAM Controller configuration sequence. - */ -#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) -#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) -#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) - -/* - * 32KB, 8-bit wide for ADS config reg - */ -#define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ - -/* Serial Port */ -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -/* - * I2C - */ -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* RapidIO MMU */ -#define CONFIG_SYS_RIO_MEM_VIRT 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_BUS 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_PHYS 0xc0000000 -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 -#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */ - -#if defined(CONFIG_PCI) - -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ -#endif - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_TSEC_ENET - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC0" - -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#endif - -#define CONFIG_IPADDR 192.168.1.253 - -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/nfsroot" -#define CONFIG_BOOTFILE "your.uImage" - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyCPM\0" \ - "ramdiskaddr=1000000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=mpc8560ads.dtb\0" - -#endif /* __CONFIG_H */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 106d1e6..3826f41 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -97,14 +97,6 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE 0xD0001000 -#elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - /* High Level Configuration Options */ #if defined(CONFIG_PCI) @@ -151,7 +143,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ENABLE_36BIT_PHYS @@ -171,7 +162,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 /* DDR3 Controller Settings */ #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f @@ -413,12 +403,6 @@ extern unsigned long get_sdram_size(void); #undef CONFIG_SYS_RAMBOOT #endif -#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 -#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) -#define CONFIG_A003399_NOR_WORKAROUND -#endif -#endif - #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ @@ -528,8 +512,6 @@ extern unsigned long get_sdram_size(void); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 -#define CONFIG_ETHPRIME "eTSEC1" - /* TBI PHY configuration for SGMII mode */ #define CONFIG_TSEC_TBICR_SETTINGS ( \ TBICR_PHY_RESET \ @@ -606,14 +588,7 @@ extern unsigned long get_sdram_size(void); * Environment Configuration */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#endif - #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -643,10 +618,10 @@ extern unsigned long get_sdram_size(void); "ext2load usb 0:4 $fdtaddr $fdtfile;" \ "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - CONFIG_BOOTMODE + BOOTMODE #if defined(CONFIG_TARGET_P1010RDB_PA) -#define CONFIG_BOOTMODE \ +#define BOOTMODE \ "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ @@ -655,7 +630,7 @@ extern unsigned long get_sdram_size(void); "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" #elif defined(CONFIG_TARGET_P1010RDB_PB) -#define CONFIG_BOOTMODE \ +#define BOOTMODE \ "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index e6d5321..adc2be8 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -56,9 +56,7 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ENABLE_36BIT_PHYS @@ -94,7 +92,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x52 @@ -146,8 +143,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #if defined(CONFIG_RAMBOOT_PBL) #define CONFIG_SYS_RAMBOOT #endif @@ -374,7 +369,6 @@ #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0 #define CONFIG_SYS_TBIPA_VALUE 8 -#define CONFIG_ETHPRIME "FM1@DTSEC1" #endif /* @@ -414,7 +408,6 @@ * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin #define __USB_PHY_TYPE utmi diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index dbaffc6..8114373 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -46,7 +46,6 @@ #include <asm/arch/config.h> /* There is no PHY directly connected so don't ask it for link status */ -#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* * Ethernet Driver configuration diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index bbd3ccc..b70829c 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -51,7 +51,6 @@ #include <asm/arch/config.h> /* There is no PHY directly connected so don't ask it for link status */ -#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* * Ethernet Driver configuration diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index d24cfce..2e7bb67 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -20,11 +20,6 @@ #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS -/* support deep sleep */ -#ifdef CONFIG_ARCH_T1024 -#define CONFIG_DEEP_SLEEP -#endif - #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_PAD_TO 0x40000 @@ -119,9 +114,7 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -153,7 +146,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #if defined(CONFIG_TARGET_T1024RDB) #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 @@ -319,12 +311,6 @@ #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 #endif -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#endif - #if defined(CONFIG_RAMBOOT_PBL) #define CONFIG_SYS_RAMBOOT #endif @@ -368,19 +354,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Video */ -#undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS -/* - * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so - * disable empty flash sector detection, which is I/O-intensive. - */ -#undef CONFIG_SYS_FLASH_EMPTY_INFO -#endif - /* I2C */ #define I2C_PCA6408_BUS_NUM 1 @@ -505,10 +478,6 @@ #endif #endif -#ifdef CONFIG_FMAN_ENET -#define CONFIG_ETHPRIME "FM1@DTSEC4" -#endif - /* * Dynamic MTD Partition support with mtdparts */ @@ -535,25 +504,25 @@ * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi #ifdef CONFIG_ARCH_T1024 -#define CONFIG_BOARDNAME t1024rdb -#define BANK_INTLV cs0_cs1 +#define ARCH_EXTRA_ENV_SETTINGS \ + "bank_intlv=cs0_cs1\0" \ + "ramdiskfile=t1024rdb/ramdisk.uboot\0" \ + "fdtfile=t1024rdb/t1024rdb.dtb\0" #else -#define CONFIG_BOARDNAME t1023rdb -#define BANK_INTLV null +#define ARCH_EXTRA_ENV_SETTINGS \ + "bank_intlv=null\0" \ + "ramdiskfile=t1023rdb/ramdisk.uboot\0" \ + "fdtfile=t1023rdb/t1023rdb.dtb\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + ARCH_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=" __stringify(BANK_INTLV) "\0" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ - "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ - "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ - __stringify(CONFIG_BOARDNAME) ".dtb\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 9433f14..57a7875 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -70,9 +70,6 @@ /* High Level Configuration Options */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -/* support deep sleep */ -#define CONFIG_DEEP_SLEEP - #ifndef CONFIG_RESET_VECTOR_ADDRESS #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif @@ -96,9 +93,7 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -133,7 +128,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 @@ -302,22 +296,10 @@ #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 #endif -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - #if defined(CONFIG_RAMBOOT_PBL) #define CONFIG_SYS_RAMBOOT #endif -#ifdef CONFIG_SYS_FSL_ERRATUM_A008044 -#if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_A008044_WORKAROUND -#endif -#endif - #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ @@ -354,19 +336,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB) -/* Video */ -#define CONFIG_FSL_DIU_FB - -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_FSL_DIU_CH7301 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#define CONFIG_VIDEO_BMP_LOGO -#endif -#endif - -/* I2C */ - /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 #define I2C_MUX_CH_DEFAULT 0x8 @@ -523,8 +492,6 @@ #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c #endif #endif - -#define CONFIG_ETHPRIME "FM1@DTSEC4" #endif /* @@ -553,7 +520,6 @@ * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #define __USB_PHY_TYPE utmi @@ -571,18 +537,11 @@ #define FDTFILE "t1042rdb/t1042d4rdb.dtb" #endif -#ifdef CONFIG_FSL_DIU_FB -#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi" -#else -#define DIU_ENVIRONMENT -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "video-mode=" __stringify(DIU_ENVIRONMENT) "\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index a41f9f0..1ff2a61 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -88,7 +88,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BTB /* toggle branch predition */ #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -118,7 +117,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 2 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ #define SPD_EEPROM_ADDRESS1 0x51 @@ -298,12 +296,6 @@ #define CONFIG_SYS_RAMBOOT #endif -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ @@ -480,10 +472,6 @@ #define SGMII_CARD_PORT4_PHY_ADDR 0x1F #endif -#ifdef CONFIG_FMAN_ENET -#define CONFIG_ETHPRIME "FM1@DTSEC3" -#endif - /* * SATA */ @@ -539,7 +527,6 @@ * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 7165ba0..5cd987b 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -83,7 +83,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BTB /* toggle branch predition */ #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -113,7 +112,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ #define SPD_EEPROM_ADDRESS1 0x51 @@ -256,12 +254,6 @@ #define CONFIG_SYS_RAMBOOT #endif -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ @@ -435,10 +427,6 @@ #define AQR113C_PHY_ADDR2 0x08 #endif -#ifdef CONFIG_FMAN_ENET -#define CONFIG_ETHPRIME "FM1@DTSEC3" -#endif - /* * SATA */ @@ -492,7 +480,6 @@ * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index daccd81..610e36e 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -65,7 +65,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BTB /* toggle branch predition */ #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -94,7 +93,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 /* * IFC Definitions @@ -102,12 +100,6 @@ #define CONFIG_SYS_FLASH_BASE 0xe0000000 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#endif - #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ @@ -190,10 +182,6 @@ #define CONFIG_LBA48 #endif -#ifdef CONFIG_FMAN_ENET -#define CONFIG_ETHPRIME "FM1@DTSEC1" -#endif - /* * Environment */ @@ -216,7 +204,6 @@ * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #define HVBOOT \ @@ -475,10 +462,6 @@ #define CONFIG_LBA48 #endif -#ifdef CONFIG_FMAN_ENET -#define CONFIG_ETHPRIME "FM1@DTSEC1" -#endif - /* * USB */ diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index cac7847..7dd2dc4 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -17,12 +17,6 @@ #define CONFIG_SKIP_TRUNOFF_WATCHDOG -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_SEPARATE -#endif -#endif - /* * Timer */ @@ -158,7 +152,6 @@ #define PHYS_FLASH_1 0x88000000 /* BANK 0 */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index d05a4d0..3766081 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -19,12 +19,6 @@ #define CONFIG_MEM_REMAP #endif -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_SEPARATE -#endif -#endif - /* * Timer */ @@ -274,7 +268,6 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ diff --git a/include/configs/alt.h b/include/configs/alt.h index 37b5800..acc416d 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -31,7 +31,6 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 9070845..748cbe3 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -196,38 +196,6 @@ #endif #endif /* !CONFIG_MTD_RAW_NAND */ -/* - * For NOR boot, we must set this to the start of where NOR is mapped - * in memory. - */ - -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif - -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER) -/* Remove other SPL modes. */ -/* disable host part of MUSB in SPL */ -/* disable EFI partitions and partition UUID support */ -#endif - /* USB Device Firmware Update support */ #ifndef CONFIG_SPL_BUILD #define DFUARGS \ @@ -272,12 +240,6 @@ #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #endif /* NOR support */ -#ifdef CONFIG_DRIVER_TI_CPSW -#define CONFIG_CLOCK_SYNTHESIZER -#define CLK_SYNTHESIZER_I2C_ADDR 0x65 -#endif - #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index 10a95a1..608a22d 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -129,9 +129,4 @@ #endif /* CONFIG_MTD_RAW_NAND */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - #endif /* ! __CONFIG_AM335X_GUARDIAN_H */ diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 5ed4eb3..4c8df57 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -24,16 +24,6 @@ #define CONFIG_HSMMC2_8BIT -#ifndef CONFIG_SHC_ICT -/* - * In builds other than ICT, reset to retry after timeout - * Define a timeout after which a stopped bootloader continues autoboot - * (only works with CONFIG_RESET_TO_RETRY) - */ -# define CONFIG_BOOT_RETRY_TIME 30 -# define CONFIG_RESET_TO_RETRY -#endif - #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ @@ -158,16 +148,4 @@ /* PMIC support */ #define CONFIG_POWER_TPS65217 -/* SPL */ - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif - -#define CONFIG_NET_RETRY_COUNT 10 #endif /* ! __CONFIG_AM335X_SHC_H */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 63805d3..b872ade 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -14,9 +14,6 @@ #include <configs/ti_omap3_common.h> -/* Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 - /* Board NAND Info. */ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, \ @@ -44,9 +41,6 @@ #endif /* CONFIG_MTD_RAW_NAND */ /* Environment information */ - -#define CONFIG_BOOTFILE "uImage" - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \ @@ -117,9 +111,6 @@ #define CONFIG_SYS_FLASH_BASE NAND_BASE #endif -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ /* Defines for SPL */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 7bea61e..5057441 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -56,28 +56,6 @@ #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 #endif -#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET) -#undef CONFIG_USB_DWC3_PHY_OMAP -#undef CONFIG_USB_DWC3_OMAP -#undef CONFIG_USB_DWC3 -#undef CONFIG_USB_DWC3_GADGET - -#undef CONFIG_USB_GADGET_DOWNLOAD -#undef CONFIG_USB_GADGET_VBUS_DRAW -#undef CONFIG_USB_GADGET_MANUFACTURER -#undef CONFIG_USB_GADGET_VENDOR_NUM -#undef CONFIG_USB_GADGET_PRODUCT_NUM -#undef CONFIG_USB_GADGET_DUALSPEED -#endif - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_TIMER -#endif - #ifndef CONFIG_SPL_BUILD /* USB Device Firmware Update support */ #define DFUARGS \ @@ -145,15 +123,8 @@ #endif -#ifndef CONFIG_SPL_BUILD -/* CPSW Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 -#endif - #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ -#define CONFIG_SYS_RX_ETH_BUFFER 64 - /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND /* NAND: device related configs */ diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index ff0498a..c36311e 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -45,7 +45,6 @@ #define CONFIG_HSMMC2_8BIT /* CPSW Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ /* diff --git a/include/configs/amcore.h b/include/configs/amcore.h index ae8aa35..898978e 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -10,7 +10,6 @@ #define CONFIG_HOSTNAME "AMCORE" -#define CONFIG_MCFTMR #define CONFIG_SYS_UART_PORT 0 #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -46,7 +45,6 @@ /* amcore design has flash data bytes wired swapped */ #define CONFIG_SYS_WRITE_SWAPPED_DATA /* reserve 128-4KB */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) #define CONFIG_SYS_MONITOR_LEN ((128 - 4) * 1024) #define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) diff --git a/include/configs/ap121.h b/include/configs/ap121.h index 70cd2ee..e1c2e06 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -9,8 +9,6 @@ #define CONFIG_SYS_MHZ 200 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/ap143.h b/include/configs/ap143.h index 167cc47..37fc196 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -9,8 +9,6 @@ #define CONFIG_SYS_MHZ 325 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/ap152.h b/include/configs/ap152.h index 5bfca42..9f47633 100644 --- a/include/configs/ap152.h +++ b/include/configs/ap152.h @@ -9,8 +9,6 @@ #define CONFIG_SYS_MHZ 375 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h index 8a6f294..71a80f3 100644 --- a/include/configs/apalis-imx8x.h +++ b/include/configs/apalis-imx8x.h @@ -122,8 +122,6 @@ #define CONFIG_FEC_ENET_DEV 0 #define IMX_FEC_BASE 0x5b040000 #define CONFIG_FEC_MXC_PHYADDR 0x4 -#define CONFIG_ETHPRIME "eth0" -#define CONFIG_FEC_XCV_TYPE RGMII #define PHY_ANEG_TIMEOUT 20000 #endif /* __APALIS_IMX8X_H */ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 5719264..da935f7 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -114,8 +114,4 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -/* Reserve top 1M for secure RAM */ -#define CONFIG_ARMV7_SECURE_BASE 0xfff00000 -#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000 - #endif /* __CONFIG_H */ diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index bbdcab2..ea5711d 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -45,7 +45,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index e639737..611b6d7 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -21,8 +21,6 @@ #define CONSOLE_DEV "ttymxc0" #endif -#define CONFIG_FEC_XCV_TYPE RGMII - /* Framebuffer */ #define CONFIG_SYS_LDB_CLOCK 28341000 @@ -34,7 +32,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 0 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN @@ -415,8 +412,6 @@ HAB_EXTRA_SETTINGS \ EXTRA_ENV_BOARD_SETTINGS -#define CONFIG_ARP_TIMEOUT 200UL - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -443,7 +438,6 @@ /* Framebuffer */ /* check this console not needed, after test remove it */ #define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX6_PWM_PER_CLK 66000000 diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index d24ba2f..18e1e40 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_SDRAM_BASE (ARMADILLO_800EVA_SDRAM_BASE) #define CONFIG_SYS_SDRAM_SIZE (ARMADILLO_800EVA_SDRAM_SIZE) -#define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) @@ -68,7 +67,6 @@ #define CONFIG_SH_ETHER_BASE_ADDR 0xe9a00000 #define CONFIG_SH_ETHER_SH7734_MII (0x01) #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ #define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() diff --git a/include/configs/aspeed-common.h b/include/configs/aspeed-common.h index 96526e1..0954bc0 100644 --- a/include/configs/aspeed-common.h +++ b/include/configs/aspeed-common.h @@ -33,9 +33,4 @@ * NS16550 Configuration */ -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - #endif /* __AST_COMMON_CONFIG_H */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 4f6fb41..9d1203f 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -51,12 +51,6 @@ #define ENABLE_JFFS 1 #endif -#define CONFIG_MCFRTC -#undef RTC_DEBUG - -/* Timer */ -#define CONFIG_MCFTMR - /* I2C */ /* @@ -207,12 +201,6 @@ #define CONFIG_SYS_FLASH_BASE 0x00000000 -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#else -/* This is mainly used during relocation in start.S */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index b93c67b..669a8ec 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -15,11 +15,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - #ifdef CONFIG_SD_BOOT #else diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index c9344e8..f5cc0b2 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -27,23 +27,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ -/* Define actual evaluation board type from used processor type */ -#ifdef CONFIG_AT91SAM9G20 -# define CONFIG_AT91SAM9G20EK /* It's an Atmel AT91SAM9G20 EK */ -#else -# define CONFIG_AT91SAM9260EK /* It's an Atmel AT91SAM9260 EK */ -#endif - -/* Misc CPU related */ - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 - /* * SDRAM: 1 bank, min 32, max 128 MB * Initialized before u-boot gets started. @@ -84,16 +67,4 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#elif defined(CONFIG_SYS_USE_NANDFLASH) - -/* bootstrap + u-boot + env + linux in nandflash */ - -#else /* CONFIG_SYS_USE_MMC */ -/* bootstrap + u-boot + env + linux in mmc */ -/* For FAT system, most cases it should be in the reserved sector */ -#endif - #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 7fce98f..55ddb38 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -14,35 +14,14 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ -#ifdef CONFIG_AT91SAM9G10 -#define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/ -#else -#define CONFIG_AT91SAM9261EK /* It's an Atmel AT91SAM9261 EK*/ -#endif - #include <asm/hardware.h> -#define CONFIG_ATMEL_LEGACY - /* * Hardware drivers */ /* LCD */ #define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_LCD -#ifdef CONFIG_AT91SAM9261EK -#define CONFIG_ATMEL_LCD_BGR555 -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 @@ -71,8 +50,6 @@ #define DM9000_DATA (CONFIG_DM9000_BASE + 4) #define CONFIG_DM9000_USE_16BIT #define CONFIG_DM9000_NO_SROM -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R /* USB */ #define CONFIG_USB_ATMEL @@ -87,17 +64,4 @@ #endif #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ - -#elif CONFIG_SYS_USE_DATAFLASH_CS3 - -/* bootstrap + u-boot + env + linux in dataflash on CS3 */ - -#else /* CONFIG_SYS_USE_NANDFLASH */ - -/* bootstrap + u-boot + env + linux in nandflash */ -#endif - #endif diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 485211c..b63cd4b 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -22,29 +22,12 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#ifndef CONFIG_SYS_USE_BOOT_NORFLASH -#else -#define CONFIG_SYS_USE_NORFLASH -#endif - /* * Hardware drivers */ -#define CONFIG_ATMEL_LEGACY /* LCD */ #define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 @@ -60,7 +43,6 @@ #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_MONITOR_SEC 1:0-3 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Address and size of Primary Environment Sector */ @@ -190,10 +172,6 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 #endif -/* Ethernet */ -#define CONFIG_RESET_PHY_R 1 -#define CONFIG_AT91_WANTS_COMMON_PHY - /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB @@ -203,13 +181,4 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ - -#elif CONFIG_SYS_USE_NANDFLASH - -/* bootstrap + u-boot + env + linux in nandflash */ -#endif - #endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 973e889..014a7c9 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -10,32 +10,14 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_AT91SAM9M10G45EK - /* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* LCD */ #define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_LCD -#define CONFIG_ATMEL_LCD_RGB565 -/* board specific(not enough SRAM) */ -#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x70000000 @@ -58,10 +40,6 @@ #endif -/* Ethernet */ -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY - #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ #elif CONFIG_SD_BOOT @@ -94,7 +72,6 @@ 56, 57, 58, 59, 60, 61, 62, 63, } #endif -#define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK 132096000 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 #define CONFIG_SYS_MCKR 0x1301 diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index f102dbe..cd7c271 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -18,15 +18,6 @@ /* LCD */ #define LCD_BPP LCD_COLOR16 #define LCD_OUTPUT_BPP 24 -#define CONFIG_LCD_LOGO -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_LCD_RGB565 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 5bc47d6..e0aeae8 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -16,20 +16,12 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */ -#define CONFIG_ATMEL_LEGACY - /* * Hardware drivers */ /* LCD */ #define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_RGB565 1 /* Let board_init_f handle the framebuffer allocation */ #undef CONFIG_FB_ADDR @@ -54,18 +46,4 @@ #endif -/* Ethernet - not present */ - -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ - -#elif CONFIG_SYS_USE_NANDFLASH - -/* bootstrap + u-boot + env + linux in nandflash */ - -#else /* CONFIG_SYS_USE_MMC */ - -/* bootstrap + u-boot + env + linux in mmc */ -#endif #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index e6d5b99..013c7cf 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -13,12 +13,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ /* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE /* * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0) @@ -60,14 +54,6 @@ #endif #endif -#ifdef CONFIG_NAND_BOOT -/* bootstrap + u-boot + env + linux in nandflash */ -#elif defined(CONFIG_SPI_BOOT) -/* bootstrap + u-boot + env + linux in spi flash */ -#elif defined(CONFIG_SYS_USE_DATAFLASH) -/* bootstrap + u-boot + env + linux in data flash */ -#endif - /* SPL */ #define CONFIG_SPL_MAX_SIZE 0x6000 #define CONFIG_SPL_STACK 0x308000 diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index 3903dcf..ba31402 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -82,7 +82,6 @@ #define PHYS_FLASH_1 0x88000000 /* BANK 0 */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index c02d25c..cb400be 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -18,7 +18,6 @@ /* * Memory configuration */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -58,11 +57,6 @@ "; fi\0" /* - * Environment configuration - */ -#define CONFIG_BOOTFILE "uImage" - -/* * Console configuration */ diff --git a/include/configs/baltos.h b/include/configs/baltos.h index f4ab664..b881d8c 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -214,18 +214,6 @@ #endif #endif -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_HOST -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_OTG - /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND #define GPMC_NAND_ECC_LP_x8_LAYOUT 1 diff --git a/include/configs/beacon-rzg2m.h b/include/configs/beacon-rzg2m.h index 7eaafb0..2713b15 100644 --- a/include/configs/beacon-rzg2m.h +++ b/include/configs/beacon-rzg2m.h @@ -8,9 +8,6 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index e0508b0..762d198 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -34,12 +34,6 @@ /* Enable PREBOOT variable */ -/* Set ARP_TIMEOUT to 500ms */ -#define CONFIG_ARP_TIMEOUT 500UL - -/* Set ARP_TIMEOUT_COUNT to 3 repetitions */ -#define CONFIG_NET_RETRY_COUNT 5 - /* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */ #define BK4_NET_INIT "run set_gpio122;" diff --git a/include/configs/blanche.h b/include/configs/blanche.h index 2135ba7..4f8da59 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -29,7 +29,6 @@ #define CONFIG_SH_QSPI_BASE 0xE6B10000 #else #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_BASE 0x00000000 #define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ diff --git a/include/configs/bmips_common.h b/include/configs/bmips_common.h index 0f63239..899a538 100644 --- a/include/configs/bmips_common.h +++ b/include/configs/bmips_common.h @@ -8,10 +8,6 @@ #include <linux/sizes.h> -/* ETH */ -#define CONFIG_PHY_RESET_DELAY 20 -#define CONFIG_SYS_RX_ETH_BUFFER 6 - /* UART */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 500000, 1500000 } @@ -21,7 +17,4 @@ #define CONFIG_SYS_BOOTPARAMS_LEN SZ_128K #define CONFIG_SYS_CBSIZE SZ_512 -/* U-Boot */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #endif /* __CONFIG_BMIPS_COMMON_H */ diff --git a/include/configs/boston.h b/include/configs/boston.h index 347b178..3bf85b6 100644 --- a/include/configs/boston.h +++ b/include/configs/boston.h @@ -31,8 +31,6 @@ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - /* * Console */ diff --git a/include/configs/broadcom_bcm96753ref.h b/include/configs/broadcom_bcm96753ref.h new file mode 100644 index 0000000..c002985 --- /dev/null +++ b/include/configs/broadcom_bcm96753ref.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com> + */ + +#include <linux/sizes.h> + +/* + * common + */ + +/* UART */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ + 230400, 500000, 1500000 } +/* Memory usage */ +#define CONFIG_SYS_MAXARGS 24 + +/* + * 6853 + */ + +/* RAM */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +/* U-Boot */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) + +#ifdef CONFIG_MTD_RAW_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* CONFIG_MTD_RAW_NAND */ + +/* + * 96753ref + */ diff --git a/include/configs/brppt2.h b/include/configs/brppt2.h index 7ab7f55..92f69ba 100644 --- a/include/configs/brppt2.h +++ b/include/configs/brppt2.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_PL310_BASE L2_PL310_BASE #endif /* !CONFIG_SYS_L2CACHE_OFF */ -#define CONFIG_BOARD_POSTCLK_INIT #define CONFIG_MXC_GPT_HCLK /* MMC */ @@ -88,9 +87,7 @@ BUR_COMMON_ENV \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Ethernet */ -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_FIXED_SPEED _1000BASET -#define CONFIG_ARP_TIMEOUT 1500UL /* USB Configs */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h index 05915b4..6985011 100644 --- a/include/configs/bur_cfg_common.h +++ b/include/configs/bur_cfg_common.h @@ -23,11 +23,7 @@ "setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ "setenv stdout nc;setenv stdin nc;setenv stderr nc\0" -/* Network defines */ -#define CONFIG_NET_RETRY_COUNT 10 - /* Network console */ -#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ /* As stated above, the following choices are optional. */ diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 70689a6..58d7a3a 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -32,13 +32,9 @@ #define CONFIG_FACTORYSET -/* ENET Config */ -#define CONFIG_FEC_XCV_TYPE RMII - /* ENET1 connects to base board and MUX with ESAI */ #define CONFIG_FEC_ENET_DEV 1 #define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_ETHPRIME "eth1" /* I2C Configuration */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index 2c406d3..1cc8609 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -28,8 +28,4 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -/* Reserve top 1M for secure RAM */ -#define CONFIG_ARMV7_SECURE_BASE 0xfff00000 -#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000 - #endif /* __CONFIG_H */ diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index ce36b2e..bd5c072 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -136,7 +136,6 @@ /* Networking */ #define CONFIG_FEC_MXC_PHYADDR -1 -#define CONFIG_FEC_XCV_TYPE RGMII #define FEC_QUIRK_ENET_MAC #endif /* __CGTQMX8_H */ diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index fe49627..ad1cd86 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -125,20 +125,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -/* NAND: SPL related configs */ - -/* USB configuration */ -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif #if defined(CONFIG_ENV_IS_IN_NAND) #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE diff --git a/include/configs/chromebook_samus.h b/include/configs/chromebook_samus.h index 9d5a63c..e29be3f 100644 --- a/include/configs/chromebook_samus.h +++ b/include/configs/chromebook_samus.h @@ -15,9 +15,6 @@ #include <configs/x86-common.h> #include <configs/x86-chromebook.h> -/* We can rely on running natively, and this saves code size */ -#undef CONFIG_BIOSEMU - #undef CONFIG_STD_DEVICES_SETTINGS #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ "stdout=vidconsole,serial\0" \ diff --git a/include/configs/ci20.h b/include/configs/ci20.h index 17954fe..ea9440d 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -20,8 +20,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* cached (KSEG0) address */ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - /* NS16550-ish UARTs */ #define CONFIG_SYS_NS16550_CLK 48000000 diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index a5bf6cc..8af80f5 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -13,8 +13,6 @@ #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR /* Network */ -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 0 /* ENET1 */ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index c19aaac..f836f92 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -147,11 +147,7 @@ /* Ethernet */ #define CONFIG_FEC_MXC_PHYADDR 0 -#define CONFIG_FEC_XCV_TYPE RGMII #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_ETHPRIME "FEC0" -#define CONFIG_ARP_TIMEOUT 200UL -#define CONFIG_NET_RETRY_COUNT 5 /* USB */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) @@ -175,8 +171,6 @@ /* Display */ #define CONFIG_IMX_HDMI -#define CONFIG_VIDEO_BMP_LOGO - /* EEPROM */ #endif /* __CONFIG_CM_FX6_H */ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 2d09a6f..eb015e1 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -32,9 +32,6 @@ 42, 43, 44, 45, 46, 47, 48, 49, \ 50, 51, 52, 53, 54, 55, 56, 57, } -/* CPSW Ethernet support */ -#define CONFIG_SYS_RX_ETH_BUFFER 64 - /* Power */ #define CONFIG_POWER_TPS65218 diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 81315f6..1822ce5 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -32,9 +32,6 @@ #define CONFIG_SYS_CLK 66000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -/* Enable Dma Timer */ -#define CONFIG_MCFTMR - /* --- * Define baudrate for UART1 (console output, tftp, ...) * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud @@ -88,24 +85,12 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text); -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - #ifdef CONFIG_MCFFEC -# define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif @@ -204,12 +189,6 @@ enter a valid image address in flash */ #define CONFIG_SYS_FLASH_BASE 0xffe00000 -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - #define CONFIG_SYS_MONITOR_LEN 0x20000 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index 91f0f95..53bfab4 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -165,7 +165,6 @@ #if defined(CONFIG_DM_VIDEO) #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR -#define CONFIG_VIDEO_BMP_LOGO #endif #endif /* __COLIBRI_IMX6ULL_CONFIG_H */ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 1dbc77d..0d1a1bc 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -35,7 +35,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 92e24ea..0382724 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -201,8 +201,4 @@ #define CONFIG_USBD_HS -#if defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_BMP_LOGO -#endif - #endif diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 975f745..99645f3 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -38,7 +38,6 @@ #ifdef CONFIG_LCD #define CONFIG_PXA_LCD #define CONFIG_PXA_VGA -#define CONFIG_LCD_LOGO #endif /* @@ -50,9 +49,6 @@ #define CONFIG_DM9000_BASE 0x08000000 #define DM9000_IO (CONFIG_DM9000_BASE) #define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_NET_RETRY_COUNT 10 - -#define CONFIG_BOOTP_BOOTFILESIZE #endif /* @@ -90,7 +86,6 @@ #define CONFIG_SYS_FLASH_UNLOCK_TOUT (25 * CONFIG_SYS_HZ) #endif -#define CONFIG_SYS_MONITOR_BASE 0x0 #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Skip factory configuration block */ diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index c377187..c45016a 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -15,9 +15,6 @@ #define CONFIG_TEGRA_UARTA_SDIO1 #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* LCD support */ -#define CONFIG_LCD_LOGO - /* NAND support */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 62f8518..2e7b640 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -14,14 +14,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_SYS_FSL_DCU_LE - -#define CONFIG_SYS_DCU_ADDR DCU0_BASE_ADDR -#define DCU_LAYER_MAX_NUM 64 -#endif - /* NAND support */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/condor.h b/include/configs/condor.h index 822ef71..213e68f 100644 --- a/include/configs/condor.h +++ b/include/configs/condor.h @@ -11,9 +11,6 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Environment compatibility */ /* SH Ether */ @@ -23,7 +20,6 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ /* XTAL_CLK : 33.33MHz */ diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 7fb96e8..a7d922c 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -27,11 +27,6 @@ #define CONFIG_PCI_SCAN_SHOW #endif -/* - * Software (bit-bang) MII driver configuration - */ -#define CONFIG_BITBANGMII_MULTI - /* SPL */ /* * Select the boot device here @@ -76,7 +71,6 @@ #define CONFIG_HOSTNAME "ccdc" #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "ccdc.img" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth1\0" \ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index bd26412..3a939b0 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -57,9 +57,7 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -97,7 +95,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS1 0x51 @@ -144,8 +141,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - #if defined(CONFIG_RAMBOOT_PBL) #define CONFIG_SYS_RAMBOOT #endif @@ -371,7 +366,6 @@ #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 #define CONFIG_SYS_TBIPA_VALUE 8 -#define CONFIG_ETHPRIME "FM1@DTSEC1" #endif /* @@ -411,7 +405,6 @@ * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #ifdef CONFIG_TARGET_P4080DS diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 27284f7..bb73201 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -23,31 +23,18 @@ * hex number here! */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - /* serial console */ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS /* LED */ -#define CONFIG_AT91_LED #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 @@ -68,11 +55,6 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 #endif -/* Ethernet */ -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91_WANTS_COMMON_PHY - /* DFU class support */ #define DFU_MANIFEST_POLL_TIMEOUT 25000 @@ -97,7 +79,6 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } -#define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK 132096000 #define AT91_PLL_LOCK_TIMEOUT 1000000 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 956a965..855711e 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -137,13 +137,6 @@ #define CONFIG_SYS_NAND_ECCBYTES 10 #endif -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_NET_RETRY_COUNT 10 -#endif - #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ #define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE @@ -155,7 +148,6 @@ /* * U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ @@ -184,10 +176,6 @@ "console=ttyS2,115200n8\0" \ "hwconfig=dsp:wake=yes" -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - /* USB Configs */ #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h index fcdf7e9..ad28fa0 100644 --- a/include/configs/dart_6ul.h +++ b/include/configs/dart_6ul.h @@ -22,11 +22,6 @@ #ifdef CONFIG_CMD_NET #define CONFIG_FEC_ENET_DEV 0 -#if (CONFIG_FEC_ENET_DEV == 0) -#define CONFIG_ETHPRIME "eth0" -#elif (CONFIG_FEC_ENET_DEV == 1) -#define CONFIG_ETHPRIME "eth1" -#endif #endif /* Environment settings */ diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 7baae3b..d6850bd 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -7,11 +7,6 @@ #define _CONFIG_DB_MV7846MP_GP_H /* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_DB_784MP_GP /* Board target name for DDR training */ - -/* * TEXT_BASE needs to be below 16MiB, since this area is scrubbed * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. @@ -72,6 +67,5 @@ /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SPD_EEPROM 0x4e -#define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index f30958f..bc5282a 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -30,13 +30,6 @@ */ /* - * Ethernet - */ -#define CONFIG_RMII -#define CONFIG_LPC32XX_ETH -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -/* * NOR Flash */ #define CONFIG_SYS_MAX_FLASH_SECT 71 @@ -94,8 +87,6 @@ * U-Boot Commands */ -#define CONFIG_BOOTFILE "uImage" - /* * SPL specific defines */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 3059bc0..16b3650 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -35,7 +35,6 @@ /* Hardware drivers */ /* DM9000 */ -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_DRIVER_DM9000 1 #define CONFIG_DM9000_BASE 0x2c000000 #define DM9000_IO CONFIG_DM9000_BASE @@ -47,10 +46,6 @@ /* TWL4030 */ /* BOOTP/DHCP options */ -#define CONFIG_BOOTP_NISDOMAIN -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_TIMEOFFSET -#undef CONFIG_BOOTP_VENDOREX /* Environment information */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 72843c9..3d3fab5 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -32,10 +32,7 @@ /* FEC ethernet */ #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 7 -#define CONFIG_ARP_TIMEOUT 200UL /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/display5.h b/include/configs/display5.h index 72526d9..7bd6533 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -33,12 +33,6 @@ * 0x1F00000 - 0x2000000 : SPI.factory (1MiB) */ -/* SPI Flash Configs */ -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_DM_SPI -#undef CONFIG_DM_SPI_FLASH -#endif - /* Below values are "dummy" - only to avoid build break */ #define CONFIG_SYS_SPI_KERNEL_OFFS 0x150000 #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 736c724..381a189 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -35,8 +35,5 @@ */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#ifdef CONFIG_RESET_PHY_R -#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ -#endif #endif /* _CONFIG_DOCKSTAR_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 711e37c..e16af88 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -55,9 +55,6 @@ /* Enhance our eMMC support / experience. */ #define CONFIG_HSMMC2_8BIT -/* CPSW Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 - /* * Default to using SPI for environment, etc. * 0x000000 - 0x040000 : QSPI.SPL (256KiB) @@ -101,7 +98,6 @@ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ #define CONFIG_SYS_FLASH_BASE (0x08000000) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Reduce SPL size by removing unlikey targets */ #endif /* NOR support */ diff --git a/include/configs/draak.h b/include/configs/draak.h index e3e2b6a..5bd8740 100644 --- a/include/configs/draak.h +++ b/include/configs/draak.h @@ -11,15 +11,11 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index 9f765fa..43a179f 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -30,9 +30,6 @@ * it has to be done after each HCD reset */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/dragonboard820c.h b/include/configs/dragonboard820c.h index e71dd24..229e1a3 100644 --- a/include/configs/dragonboard820c.h +++ b/include/configs/dragonboard820c.h @@ -26,9 +26,6 @@ /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 19000000 -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - #ifndef CONFIG_SPL_BUILD #include <config_distro_bootcmd.h> #endif diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index fd12a39..07e2b87 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -29,9 +29,6 @@ */ #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ #define CONFIG_PHY_BASE_ADR 0 -#ifdef CONFIG_RESET_PHY_R -#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ -#endif /* * SATA Driver configuration diff --git a/include/configs/eagle.h b/include/configs/eagle.h index b8a7b5a..42fe057 100644 --- a/include/configs/eagle.h +++ b/include/configs/eagle.h @@ -11,9 +11,6 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Environment compatibility */ /* Board Clock */ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 6ad8722..28bf35c 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -22,9 +22,6 @@ * Options * *----------------------------------------------------------------------*/ -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_RESET_TO_RETRY - #define STATUS_LED_ACTIVE 0 /*----------------------------------------------------------------------* @@ -32,13 +29,6 @@ * Environment is in the second sector of the first 256k of flash * *----------------------------------------------------------------------*/ -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_MCFTMR - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE @@ -60,10 +50,7 @@ *----------------------------------------------------------------------*/ #ifdef CONFIG_MCFFEC -#define CONFIG_MII_INIT 1 #define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN #define CONFIG_OVERWRITE_ETHADDR_ONCE #endif diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index 178b050..ce31a46 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -13,15 +13,11 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } diff --git a/include/configs/edison.h b/include/configs/edison.h index 02f33f3..70cccc6 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_STACK_SIZE (32 * 1024) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* RTC */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index a599722..8e2c245 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -100,8 +100,6 @@ #define CONFIG_MVGBE_PORTS {1} /* enable port 0 only */ #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION /* don't randomize MAC */ #define CONFIG_PHY_BASE_ADR 0x8 -#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ #endif /* diff --git a/include/configs/efi-x86_app.h b/include/configs/efi-x86_app.h index 33afb7c..6061a6d 100644 --- a/include/configs/efi-x86_app.h +++ b/include/configs/efi-x86_app.h @@ -10,33 +10,8 @@ #undef CONFIG_TPM_TIS_BASE_ADDRESS -/* - * Select the output device: Put an 'x' prefix before one of these to disable it - */ - -/* - * Video output - can normally continue after exit_boot_services has been - * called, since output to the display does not require EFI services at that - * point. U-Boot sets up the console memory and does its own drawing. - */ #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=vidconsole\0" \ "stderr=vidconsole\0" -/* - * Serial output with no console. Run qemu with: - * - * -display none -serial mon:stdio - * - * This will hang or fail to output on the console after exit_boot_services is - * called. - */ -#define xCONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" - -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTCOMMAND "part list efi 0; fatls efi 0:1" - #endif diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h index 279d712..bcd7b84 100644 --- a/include/configs/el6x_common.h +++ b/include/configs/el6x_common.h @@ -10,8 +10,6 @@ #include <linux/stringify.h> -#define CONFIG_BOARD_NAME EL6Q - #include "mx6_common.h" #ifdef CONFIG_SPL @@ -30,10 +28,8 @@ #define CONFIG_MXC_UART_BASE UART2_BASE -#define CONFIG_BOARD_NAME EL6Q - #define CONFIG_EXTRA_ENV_SETTINGS \ - "board="__stringify(CONFIG_BOARD_NAME)"\0" \ + "board=EL6Q\0" \ "cma_size="__stringify(EL6Q_CMA_SIZE)"\0" \ "chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0" \ "console=" CONSOLE_DEV "\0" \ @@ -55,8 +51,6 @@ #include <config_distro_bootcmd.h> -#define CONFIG_ARP_TIMEOUT 200UL - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 8ac92e4..1bf564c 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -25,8 +25,6 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_ARP_TIMEOUT 200UL - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -52,7 +50,6 @@ #endif /* Framebuffer */ -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/emsdp.h b/include/configs/emsdp.h index 2ceefed..a560673 100644 --- a/include/configs/emsdp.h +++ b/include/configs/emsdp.h @@ -8,8 +8,6 @@ #include <linux/sizes.h> -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_SYS_SDRAM_BASE 0x10000000 #define CONFIG_SYS_SDRAM_SIZE SZ_16M @@ -18,7 +16,6 @@ /* * Environment */ -#define CONFIG_BOOTFILE "app.bin" #define CONFIG_EXTRA_ENV_SETTINGS \ "upgrade_image=u-boot.bin\0" \ diff --git a/include/configs/espresso7420.h b/include/configs/espresso7420.h index 2495db9..d936b7f 100644 --- a/include/configs/espresso7420.h +++ b/include/configs/espresso7420.h @@ -10,8 +10,6 @@ #include <configs/exynos7420-common.h> -#define CONFIG_BOARD_COMMON - #define CONFIG_ESPRESSO7420 #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index d88c14a..3231f3c 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -54,8 +54,6 @@ /* JFFS2 */ /* Ethernet */ -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RMII #define CONFIG_PHY_ID 0 #define CONFIG_MACB_SEARCH_PHY @@ -105,7 +103,6 @@ /* DHCP/BOOTP options */ #ifdef CONFIG_CMD_DHCP -#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_SYS_AUTOLOAD "n" #endif diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 52dcf7a..4202c62 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -12,8 +12,6 @@ #include "exynos-common.h" -#define CONFIG_BOARD_COMMON - /* SD/MMC configuration */ #define CONFIG_MMC_DEFAULT_DEV 0 diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 90d095d..7ab821d 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -56,32 +56,6 @@ #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -#define CONFIG_SECURE_BL1_ONLY - -/* Secure FW size configuration */ -#ifdef CONFIG_SECURE_BL1_ONLY -#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ -#else -#define CONFIG_SEC_FW_SIZE 0 -#endif - -/* Configuration of BL1, BL2, ENV Blocks on mmc */ -#define CONFIG_RES_BLOCK_SIZE (512) -#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ -#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ - -#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) -#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) - -/* U-Boot copy size from boot Media to DRAM.*/ -#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) -#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) - -#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 -#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) - /* SPI */ /* Ethernet Controllor Driver */ diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index 00b6778..bcbdfa7 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -21,8 +21,6 @@ #define FLASH_SIZE (4 << 20) #define CONFIG_SPI_BOOTING -#define CONFIG_BOARD_COMMON - /* Display */ #ifdef CONFIG_LCD #define CONFIG_EXYNOS_FB diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index 7762c77..51f9f22 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -18,9 +18,6 @@ #define CONFIG_SPL_MAX_FOOTPRINT (30 * 1024) -#define CONFIG_DEVICE_TREE_LIST "exynos5800-peach-pi" \ - "exynos5420-peach-pit exynos5420-smdk5420" - #define CONFIG_PHY_IRAM_BASE 0x02020000 /* Address for relocating helper code (Last 4 KB of IRAM) */ diff --git a/include/configs/exynos7420-common.h b/include/configs/exynos7420-common.h index 464f927..fcb238f 100644 --- a/include/configs/exynos7420-common.h +++ b/include/configs/exynos7420-common.h @@ -27,9 +27,6 @@ /* Timer input clock frequency */ #define COUNTER_FREQUENCY 24000000 -/* Device Tree */ -#define CONFIG_DEVICE_TREE_LIST "exynos7420-espresso7420" - /* IRAM Layout */ #define CONFIG_IRAM_BASE 0x02100000 #define CONFIG_IRAM_SIZE 0x58000 diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 8d3449f..53396aa 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -28,16 +28,11 @@ /* Timer input clock frequency */ #define COUNTER_FREQUENCY 26000000 -/* Device Tree */ -#define CONFIG_DEVICE_TREE_LIST "EXYNOS78x0-a5y17lte" - #define CPU_RELEASE_ADDR secondary_boot_addr #define CONFIG_SYS_BAUDRATE_TABLE \ {9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600} -#define CONFIG_BOARD_COMMON - #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - GENERATED_GBL_DATA_SIZE) /* DRAM Memory Banks */ diff --git a/include/configs/falcon.h b/include/configs/falcon.h index 1d6a9b9..52dcf19 100644 --- a/include/configs/falcon.h +++ b/include/configs/falcon.h @@ -21,9 +21,6 @@ #define GICD_BASE 0xF1000000 #define GICR_BASE 0xF1060000 -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Board Clock */ /* XTAL_CLK : 16.66MHz */ diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h index 9d96dfc..5e6a8ee 100644 --- a/include/configs/gardena-smart-gateway-at91sam.h +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -17,9 +17,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */ diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index d287942..8b80841 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -44,9 +44,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) #define CONFIG_SYS_CBSIZE 512 -/* U-Boot */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - /* Environment settings */ /* diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h index 7e13464..6b910d5 100644 --- a/include/configs/gazerbeam.h +++ b/include/configs/gazerbeam.h @@ -24,7 +24,6 @@ /* * The reserved memory */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ @@ -77,13 +76,9 @@ * Environment Configuration */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 - /* TODO: Turn into string option and migrate to Kconfig */ #define CONFIG_HOSTNAME "gazerbeam" #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 402c5bf..8d467e4 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -14,8 +14,6 @@ #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> -#define CONFIG_BOARD_NAME "General Electric Bx50v3" - #include "mx6_common.h" #include <linux/sizes.h> diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 51e671a..832441a 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -43,9 +43,6 @@ */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#ifdef CONFIG_RESET_PHY_R -#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ -#endif /* SATA driver configuration */ #define CONFIG_LBA48 diff --git a/include/configs/gose.h b/include/configs/gose.h index 01657d7..dfa139d 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -27,7 +27,6 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index fb01c56..347845f 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -28,6 +28,5 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI #endif /* __GRPEACH_H */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 668d00c..8158222 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -72,7 +72,6 @@ /* Framebuffer and LCD */ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */ /* Miscellaneous configurable options */ diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 55c874b..0ff70fd 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -16,9 +16,6 @@ #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_RESET_TO_RETRY - /* * Miscellaneous configurable options */ diff --git a/include/configs/hihope-rzg2.h b/include/configs/hihope-rzg2.h index 68a5117..e46eb07 100644 --- a/include/configs/hihope-rzg2.h +++ b/include/configs/hihope-rzg2.h @@ -11,9 +11,6 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/hikey.h b/include/configs/hikey.h index c5f9bce..29a0d94 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -41,9 +41,6 @@ #define CONFIG_HIKEY_GPIO -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* Initial environment variables */ /* diff --git a/include/configs/hsdk-4xd.h b/include/configs/hsdk-4xd.h index 21a984a..d3d8896 100644 --- a/include/configs/hsdk-4xd.h +++ b/include/configs/hsdk-4xd.h @@ -20,7 +20,6 @@ /* * Memory configuration */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -104,7 +103,6 @@ setenv core_iccm_3 0x6; setenv core_dccm_3 0x6;\0" /* * Environment configuration */ -#define CONFIG_BOOTFILE "uImage" /* Cli configuration */ #define CONFIG_SYS_CBSIZE SZ_2K diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index c8c28bb..64dce52 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -19,7 +19,6 @@ /* * Memory configuration */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -100,11 +99,6 @@ setenv core_iccm_1 0x6; setenv core_dccm_1 0x6; \ setenv core_iccm_2 0x10; setenv core_dccm_2 0x10; \ setenv core_iccm_3 0x6; setenv core_dccm_3 0x6;\0" -/* - * Environment configuration - */ -#define CONFIG_BOOTFILE "uImage" - /* Cli configuration */ #define CONFIG_SYS_CBSIZE SZ_2K diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 2598dea..aff948c 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -32,7 +32,6 @@ #ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#undef CONFIG_RESET_PHY_R #endif /* CONFIG_CMD_NET */ /* diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index 44a4b44..cb4cf9b 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -26,9 +26,6 @@ #ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 11 -#ifdef CONFIG_RESET_PHY_R -#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ -#endif #endif /* CONFIG_CMD_NET */ #endif /* _CONFIG_ICONNECT_H */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 8de89a4..356bf6c 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -16,9 +16,6 @@ /* * High Level Configuration Options */ -#define CONFIG_BOOT_RETRY_TIME 900 -#define CONFIG_BOOT_RETRY_MIN 30 -#define CONFIG_RESET_TO_RETRY #define CONFIG_SYS_SICRH 0x00000000 #define CONFIG_SYS_SICRL (SICRL_LBC | SICRL_SPI_D) @@ -163,7 +160,6 @@ * Ethernet setup */ #ifdef CONFIG_TSEC1 -#define CONFIG_HAS_ETH0 #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1 @@ -172,14 +168,12 @@ #endif #ifdef CONFIG_TSEC2 -#define CONFIG_HAS_ETH1 #define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_SYS_TSEC2_OFFSET 0x25000 #define TSEC2_PHY_ADDR 0x3 #define TSEC2_FLAGS TSEC_GIGABIT #define TSEC2_PHYIDX 0 #endif -#define CONFIG_ETHPRIME "TSEC1" /* * Serial Port @@ -199,12 +193,10 @@ /* * U-Boot environment setup */ -#define CONFIG_BOOTP_BOOTFILESIZE /* * The reserved memory */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (768 * 1024) /* @@ -214,7 +206,6 @@ #define CONFIG_NETDEV eth1 #define CONFIG_HOSTNAME "ids8313" #define CONFIG_ROOTPATH "/opt/eldk-4.2/ppc_6xx" -#define CONFIG_BOOTFILE "ids8313/uImage" #define CONFIG_UBOOTPATH "ids8313/u-boot.bin" #define CONFIG_FDTFILE "ids8313/ids8313.dtb" #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo" diff --git a/include/configs/imgtec_xilfpga.h b/include/configs/imgtec_xilfpga.h index 19d65f5..edd24a4 100644 --- a/include/configs/imgtec_xilfpga.h +++ b/include/configs/imgtec_xilfpga.h @@ -28,8 +28,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 0x1000) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - /*---------------------------------------------------------------------- * Commands */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 641e403..bb53a33 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -83,7 +83,6 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \ CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ /* Address and size of Redundant Environment Sector */ diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index ff774ec..26d7a88 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -152,8 +152,6 @@ /* Framebuffer */ #ifdef CONFIG_VIDEO_IPUV3 # define CONFIG_IMX_VIDEO_SKIP - -# define CONFIG_VIDEO_BMP_LOGO #endif /* SPL */ diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 5a149f8..65f8944 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -23,8 +23,6 @@ /* Ethernet Configs */ -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 0 #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -109,8 +107,6 @@ "fi; " \ "else run netboot; fi" -#define CONFIG_ARP_TIMEOUT 200UL - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 261ed90..46ca1c5 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -12,8 +12,6 @@ #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR -#define CONFIG_ETHPRIME "FEC" - #undef CONFIG_SYS_AUTOLOAD #undef CONFIG_EXTRA_ENV_SETTINGS diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 7e6be60..cd1eafd 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -151,9 +151,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_ETHPRIME "FEC" - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 77f0624..e480595 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -105,8 +105,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* FEC*/ -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC #define IMX_FEC_BASE 0x30BE0000 diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index c7022ef..32c937a 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -83,9 +83,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_ETHPRIME "FEC" - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index d75fcf7..f521add 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -33,7 +33,6 @@ func(MMC, mmc, 2) \ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index 455a8d0..1952bde 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -41,7 +41,6 @@ func(MMC, mmc, 2) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif @@ -101,8 +100,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* FEC */ -#define CONFIG_ETHPRIME "eth0" -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index e2e322b..7fed9a3 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -122,8 +122,6 @@ /* ENET Config */ #if defined(CONFIG_FEC_MXC) -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC #define IMX_FEC_BASE 0x30BE0000 diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h index 1e800f0..318289b 100644 --- a/include/configs/imx8mn_var_som.h +++ b/include/configs/imx8mn_var_som.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -34,12 +32,6 @@ #include <config_distro_bootcmd.h> -/* ENET */ -#if defined(CONFIG_FEC_MXC) -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_XCV_TYPE RGMII -#endif /* CONFIG_FEC_MXC */ - #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ @@ -84,7 +76,4 @@ /* USDHC */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -/* I2C */ -#define CONFIG_SYS_I2C_SPEED 400000 - #endif /* __IMX8MN_VAR_SOM_H */ diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h index 401084c..d954e8e 100644 --- a/include/configs/imx8mn_venice.h +++ b/include/configs/imx8mn_venice.h @@ -38,7 +38,6 @@ func(MMC, mmc, 2) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif @@ -97,8 +96,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* FEC */ -#define CONFIG_ETHPRIME "eth0" -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index b810a55..5b185cf 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -26,16 +26,11 @@ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE -#undef CONFIG_DM_MMC - #define CONFIG_POWER_PCA9450 #endif #if defined(CONFIG_CMD_NET) -#define CONFIG_ETHPRIME "eth1" /* Set eqos to primary since we use its MDIO */ - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 1 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index ac4a7d0..62e06d2 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -12,17 +12,13 @@ #include <asm/arch/imx-regs.h> #include <config_distro_bootcmd.h> -#define CONFIG_HAS_ETH1 - #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x960000 #define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 #define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */ @@ -37,32 +33,14 @@ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #if defined(CONFIG_NAND_BOOT) -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_DMA #define CONFIG_SPL_NAND_MXS -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_IDENT -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000000 /* Put the FIT out of \ - * first 64MB boot area \ - */ - -/* Set a redundant offset in nand FIT mtdpart. The new uuu will burn full - * boot image (not only FIT part) to the mtdpart, so we check both two offsets - */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND \ - (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8400) - #endif #endif -#define CONFIG_REMAKE_ELF /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_ETHPRIME "eth1" /* Set eqos to primary since we use its MDIO */ - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 4 #define FEC_QUIRK_ENET_MAC @@ -186,15 +164,12 @@ #define CONFIG_MXC_UART_BASE UART3_BASE_ADDR /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_CBSIZE 2048 #define CONFIG_SYS_MAXARGS 64 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_IMX_BOOTAUX - #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -213,11 +188,6 @@ /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x20000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_USE_FLASH_BBT #endif /* CONFIG_NAND_MXS */ -#define CONFIG_SYS_I2C_SPEED 100000 - #endif /* __IMX8MP_RSB3720_H */ diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index d3cf7ab..a3bb3c9 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -32,9 +32,6 @@ /* ENET Config */ /* ENET1 */ -#if defined(CONFIG_CMD_NET) -#define CONFIG_ETHPRIME "FEC" -#endif #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 4aaed3a..7389d75 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -29,8 +29,6 @@ /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE -#undef CONFIG_DM_MMC - #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 #endif @@ -38,9 +36,6 @@ /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_ETHPRIME "FEC" - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 16a2c2c..f40caca 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -25,16 +25,11 @@ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE - -#undef CONFIG_DM_MMC #endif /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_ETHPRIME "FEC" - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index c12f383..0fe38e6 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -133,7 +133,4 @@ /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */ -/* Networking */ -#define CONFIG_FEC_XCV_TYPE RGMII - #endif /* __IMX8QM_MEK_H */ diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 5fcc963..7532c6e 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -127,8 +127,5 @@ /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */ -/* Networking */ -#define CONFIG_FEC_XCV_TYPE RGMII - #include <linux/stringify.h> #endif /* __IMX8QM_ROM7720_H */ diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index b1c51e7..beb35c9 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -136,9 +136,6 @@ #define CONFIG_PCA953X #endif -/* Networking */ -#define CONFIG_FEC_XCV_TYPE RGMII - /* Misc configuration */ #define CONFIG_SYS_CBSIZE 2048 #define CONFIG_SYS_MAXARGS 64 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 7da6802..ddb3d44 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -29,10 +29,8 @@ /* ENET Config */ #if defined(CONFIG_FEC_MXC) -#define CONFIG_ETHPRIME "FEC" #define PHY_ANEG_TIMEOUT 20000 -#define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_FEC_MXC_PHYADDR 1 #define IMX_FEC_BASE 0x29950000 diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index b507895..5c2f975 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -21,8 +21,6 @@ DMAMEM_SZ_ALL) #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_BMP_LOGO - #define CONFIG_EXTRA_ENV_SETTINGS \ "stdin=serial\0" \ "stdout=serial,vidconsole\0" \ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 6d7d798..f15a4d5 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -19,11 +19,6 @@ /* Integrator/AP-specific configuration */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* Flash settings */ #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ #define CONFIG_SYS_MAX_FLASH_SECT 128 @@ -32,8 +27,6 @@ * PCI definitions */ -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - /*----------------------------------------------------------------------- * There are various dependencies on the core module (CM) fitted * Users should refer to their CM user guide diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 3ff7bb9..288014c 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -29,7 +29,6 @@ #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_IPADDR 192.168.1.104 -#define CONFIG_BOOTFILE "uImage" /* * Miscellaneous configurable options @@ -38,26 +37,4 @@ #define CONFIG_SYS_MAX_FLASH_SECT 64 #define CONFIG_SYS_MONITOR_LEN 0x00100000 -/* - * Move up the U-Boot & monitor area if more flash is fitted. - * If this U-Boot is to be run on Integrators with varying flash sizes, - * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG - * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE - * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not - * embedded in the boot monitor(s) area - */ -#if ( PHYS_FLASH_SIZE == 0x04000000 ) - -#define CONFIG_SYS_MONITOR_BASE 0x27F40000 - -#elif (PHYS_FLASH_SIZE == 0x02000000 ) - -#define CONFIG_SYS_MONITOR_BASE 0x25F40000 - -#else - -#define CONFIG_SYS_MONITOR_BASE 0x27F40000 - -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/iot_devkit.h b/include/configs/iot_devkit.h index a1b8c06..56a67f2 100644 --- a/include/configs/iot_devkit.h +++ b/include/configs/iot_devkit.h @@ -44,8 +44,6 @@ * - Reading data from weird addresses */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define SRAM_BASE 0x30000000 #define SRAM_SIZE SZ_128K @@ -68,10 +66,4 @@ CONFIG_SYS_SDRAM_BASE) - \ CONFIG_SYS_MALLOC_LEN - \ CONFIG_ENV_SIZE - -/* - * Environment - */ -#define CONFIG_BOOTFILE "app.bin" - #endif /* _CONFIG_IOT_DEVKIT_H_ */ diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index e4b167d..5aaa31e 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -122,9 +122,8 @@ "partitions=" PARTS_DEFAULT /* Set the default list of remote processors to boot */ -#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) +#if defined(CONFIG_TARGET_J7200_A72_EVM) #define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \ - "dorprocboot=1\0" \ "do_main_cpsw0_qsgmii_phyinit=1\0" \ "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;" \ "gpio clear gpio@22_16\0" \ @@ -136,6 +135,22 @@ #ifdef DEFAULT_RPROCS #undef DEFAULT_RPROCS #endif +#elif defined(CONFIG_TARGET_J721E_A72_EVM) +#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \ + "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;" \ + "gpio clear gpio@22_16\0" \ + "main_cpsw0_qsgmii_phyinit=" \ + "if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM " \ + "|| test $board_name = j721e; then " \ + "do_main_cpsw0_qsgmii_phyinit=1; else " \ + "do_main_cpsw0_qsgmii_phyinit=0; fi;" \ + "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \ + "test ${boot} = mmc; then " \ + "run init_main_cpsw0_qsgmii_phy;" \ + "fi;\0" +#ifdef DEFAULT_RPROCS +#undef DEFAULT_RPROCS +#endif #endif #ifdef CONFIG_TARGET_J721E_A72_EVM diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h index 6fd098c..8788464 100644 --- a/include/configs/j721s2_evm.h +++ b/include/configs/j721s2_evm.h @@ -60,9 +60,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #define CONFIG_CQSPI_REF_CLK 133333333 -/* HyperFlash related configuration */ -#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 - /* U-Boot general configuration */ #define EXTRA_ENV_J721S2_BOARD_SETTINGS \ "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index a3c385b..b4c42fd 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -26,8 +26,4 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -/* Reserve top 1M for secure RAM */ -#define CONFIG_ARMV7_SECURE_BASE 0xfff00000 -#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000 - #endif /* __CONFIG_H */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index d321ebd..85cf516 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -27,11 +27,6 @@ #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - #ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS #define CONFIG_KM_DEF_ENV_BOOTPARAMS \ "actual_bank=0\0" diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h index 98204bd..af35e8e 100644 --- a/include/configs/km/km-mpc8309.h +++ b/include/configs/km/km-mpc8309.h @@ -1,7 +1,6 @@ /* * High Level Configuration Options */ -#define CONFIG_E300 1 /* E300 family */ #define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" @@ -115,7 +114,6 @@ /* EEprom support */ /* ethernet port connected to piggy (UEC2) */ -#define CONFIG_HAS_ETH1 #define CONFIG_UEC_ETH2 #define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h index 7c979c5..e1c1615 100644 --- a/include/configs/km/km-mpc83xx.h +++ b/include/configs/km/km-mpc83xx.h @@ -23,7 +23,6 @@ /* * The reserved memory */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #define CONFIG_SYS_FLASH_BASE 0xF0000000 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) @@ -108,12 +107,7 @@ "unlock=yes\0" \ "" -#if defined(CONFIG_UEC_ETH) -#define CONFIG_HAS_ETH0 -#endif - /* * QE UEC ethernet configuration */ #define CONFIG_UEC_ETH -#define CONFIG_ETHPRIME "UEC0" diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 8453be8..3285ae5 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -23,7 +23,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x54 @@ -75,7 +74,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_WRITE_SWAPPED_DATA #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT @@ -178,13 +176,6 @@ {1, {I2C_NULL_HOP} }, \ } -/* - * eTSEC - */ -#ifdef CONFIG_TSEC_ENET -#define CONFIG_ETHPRIME "ethernet@2d90000" -#endif - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define COUNTER_FREQUENCY 8333333 @@ -204,7 +195,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #define CONFIG_SYS_MONITOR_LEN 0x100000 /* 1Mbyte */ #define CONFIG_SYS_BOOTCOUNT_BE @@ -274,6 +264,4 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */ -#define CONFIG_MISC_INIT_F - #endif diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index ca0cb31..dd247ed 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -150,9 +150,7 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ENABLE_36BIT_PHYS @@ -176,7 +174,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x54 @@ -348,7 +345,6 @@ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #define CONFIG_SYS_MONITOR_LEN 0xc0000 /* 768k */ /* @@ -410,7 +406,6 @@ int get_scl(void); /* Qman / Bman */ /* RGMII (FM1@DTESC5) is local managemant interface */ #define CONFIG_SYS_RGMII2_PHY_ADDR 0x11 -#define CONFIG_ETHPRIME "fm1-mac5" /* * Hardware Watchdog diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index eca8998..84603e3 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -27,7 +27,6 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h index 2bac000..7bc402d 100644 --- a/include/configs/kontron-sl-mx6ul.h +++ b/include/configs/kontron-sl-mx6ul.h @@ -32,7 +32,6 @@ /* Board and environment settings */ #define CONFIG_MXC_UART_BASE UART4_BASE #define CONFIG_HOSTNAME "kontron-mx6ul" -#define CONFIG_ETHPRIME "eth0" #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 0f96b90..2c0ad96 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -11,11 +11,8 @@ #define CONFIG_SPL_MAX_SIZE (124 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN (512 * SZ_1K) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x187FF0 #define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SPL_BSS_MAX_SIZE SZ_8K @@ -33,13 +30,8 @@ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 #endif -#define CONFIG_REMAKE_ELF - /* ENET1 Config */ #if defined(CONFIG_CMD_NET) -#define CONFIG_ETHPRIME "FEC" - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 0 #define FEC_QUIRK_ENET_MAC @@ -92,6 +84,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 448749a..77ea132 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -19,7 +19,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define CONFIG_VERY_BIG_RAM -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 @@ -44,9 +43,6 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) -/* ethernet */ -#define CONFIG_SYS_RX_ETH_BUFFER 8 - /* SPL */ #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index 0983d40..534263f 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -60,8 +60,6 @@ #include <config_distro_bootcmd.h> -#define CONFIG_ARP_TIMEOUT 200UL - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index c538085..7d87947 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -18,7 +18,6 @@ /* Miscellaneous configurable options */ /* FEC ethernet */ -#define CONFIG_ARP_TIMEOUT 200UL /* USB Configs */ #ifdef CONFIG_CMD_USB diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 022858f..c20ef5f 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_SDRAM_BASE (KZM_SDRAM_BASE + CONFIG_SDRAM_OFFSET_FOR_RT) #define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_SIZE - CONFIG_SDRAM_OFFSET_FOR_RT) -#define CONFIG_SYS_MONITOR_BASE (KZM_FLASH_BASE) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) #define CONFIG_STANDALONE_LOAD_ADDR 0x41000000 @@ -71,6 +70,4 @@ #define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_NFS_TIMEOUT 10000UL - #endif /* __KZM9G_H */ diff --git a/include/configs/lager.h b/include/configs/lager.h index 4c291aa..8cabad2 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -28,7 +28,6 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index b912db1..4c132c6 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -50,7 +50,6 @@ /* * U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ @@ -94,10 +93,6 @@ "loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \ "bootscript=source ${bootscraddr}\0" -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - /* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index aa2542f..4a19fb8 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -45,9 +45,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) #define CONFIG_SYS_CBSIZE 512 -/* U-Boot */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - /* Environment settings */ /* diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index 3a8dd47..d0960bc 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -115,8 +115,6 @@ #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC" #endif #endif diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index 0263bb8..8191c85 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -10,7 +10,6 @@ /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* SATA */ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index ef57cf6..7735a00 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -10,9 +10,7 @@ /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 #ifndef CONFIG_SPL_BUILD #undef BOOT_TARGET_DEVICES diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index c61865c..7d8d6ee 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -14,10 +14,8 @@ #define BOARD_REV_MASK 0x001A0000 /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define SYS_SDRAM_SIZE_512 0x20000000 #define SYS_SDRAM_SIZE_1024 0x40000000 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 /* ENV */ #define CONFIG_SYS_FSL_QSPI_BASE 0x40000000 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index cbcb3f7..d57f28e 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -11,7 +11,6 @@ /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index c9a152e..c51c4f2 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -11,7 +11,6 @@ /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 2e5b804..9746081 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE @@ -59,8 +57,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 - /* * Serial Port */ @@ -108,12 +104,6 @@ #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC2" - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 #endif /* PCIe */ @@ -152,13 +142,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -/* start of monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#endif - #include <asm/fsl_secure_boot.h> #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 8c4cb7b..16c1741 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -7,10 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - -#define CONFIG_DEEP_SLEEP - #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE @@ -54,7 +50,6 @@ #define CONFIG_SYS_DDR_RAW_TIMING #endif #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -99,7 +94,6 @@ #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_WRITE_SWAPPED_DATA #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ @@ -272,9 +266,7 @@ /* * Serial Port */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#else +#ifndef CONFIG_LPUART #define CONFIG_SYS_NS16550_SERIAL #ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 @@ -304,18 +296,6 @@ */ /* - * Video - */ -#ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_BMP_LOGO - -#define CONFIG_FSL_DIU_CH7301 -#define CONFIG_SYS_I2C_DVI_BUS_NUM 0 -#define CONFIG_SYS_I2C_QIXIS_ADDR 0x66 -#define CONFIG_SYS_I2C_DVI_ADDR 0x75 -#endif - -/* * eTSEC */ @@ -340,12 +320,6 @@ #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 - #define CONFIG_FSL_SGMII_RISER 1 #define SGMII_RISER_PHY_OFFSET 0x1b @@ -397,12 +371,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - /* * Environment */ diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 5f6c2a0..bc2a265 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -6,10 +6,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - -#define CONFIG_DEEP_SLEEP - #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE @@ -77,8 +73,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 - /* Serial Port */ #define CONFIG_SYS_NS16550_SERIAL #ifndef CONFIG_DM_SERIAL @@ -197,12 +191,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - /* Environment */ #define CONFIG_SYS_BOOTM_LEN 0x8000000 /* 128 MB */ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index dcee79d..6b1ab87 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -7,10 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - -#define CONFIG_DEEP_SLEEP - #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE @@ -79,8 +75,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 - /* * IFC Definitions */ @@ -121,7 +115,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_WRITE_SWAPPED_DATA #endif @@ -170,9 +163,7 @@ /* * Serial Port */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#else +#ifndef CONFIG_LPUART #define CONFIG_SYS_NS16550_SERIAL #ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 @@ -190,29 +181,6 @@ #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 1 -/* - * MMC - */ - -/* - * Video - */ -#ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_BMP_LOGO - -#define CONFIG_FSL_DCU_SII9022A -#define CONFIG_SYS_I2C_DVI_BUS_NUM 1 -#define CONFIG_SYS_I2C_DVI_ADDR 0x39 -#endif - -/* - * eTSEC - */ - -#ifdef CONFIG_TSEC_ENET -#define CONFIG_ETHPRIME "ethernet@2d10000" -#endif - /* PCIe */ #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ @@ -378,12 +346,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - /* * Environment */ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index a517346..7bb6d41 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -40,7 +40,6 @@ /* Miscellaneous configurable options */ /* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 @@ -75,8 +74,6 @@ #define OCRAM_NONSECURE_SIZE 0x00010000 #define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ #define I2C_MUX_CH_DEFAULT 0x8 @@ -92,8 +89,4 @@ #include <asm/fsl_secure_boot.h> #endif -/* Ethernet */ -/* smallest ENETC BD ring has 8 entries */ -#define CONFIG_SYS_RX_ETH_BUFFER 8 - #endif /* __L1028A_COMMON_H */ diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 1b4d181..8d60727 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -58,15 +58,8 @@ /* Store environment at top of flash */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#endif - /* LPUART */ #ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG #define CFG_LPUART_MUX_MASK 0xf0 #define CFG_LPUART_EN 0xf0 #endif diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 0770f4e..7de186a 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -16,8 +16,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_QIXIS_I2C_ACCESS /* diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index ea6831b..3ffc4bf 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -12,7 +12,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define SPD_EEPROM_ADDRESS 0x51 #define CONFIG_SYS_SPD_BUS_NUM 0 @@ -40,11 +39,6 @@ #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB #endif -/* LPUART */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#endif - /* SATA */ /* EEPROM */ @@ -92,7 +86,6 @@ #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \ CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_WRITE_SWAPPED_DATA /* @@ -328,12 +321,6 @@ #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - /* * Environment */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 31b578a..cc15462 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -12,7 +12,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_SYS_SPD_BUS_NUM 0 @@ -62,7 +61,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_WRITE_SWAPPED_DATA /* @@ -227,8 +225,6 @@ #define QSGMII_PORT4_PHY_ADDR 0x7 #define FM1_10GEC1_PHY_ADDR 0x1 - -#define CONFIG_ETHPRIME "FM1@DTSEC3" #endif #endif diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index 14ad84a..d803fb7 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -11,7 +11,6 @@ #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_SYS_UBOOT_BASE 0x40100000 @@ -101,8 +100,6 @@ #define FDT_SEQ_MACADDR_FROM_ENV -#define CONFIG_ETHPRIME "FM1@DTSEC3" - #endif #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 3d72c67..434a5e1 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -12,7 +12,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define SPD_EEPROM_ADDRESS 0x51 #define CONFIG_SYS_SPD_BUS_NUM 0 @@ -55,7 +54,6 @@ /* LPUART */ #ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG #define CFG_UART_MUX_MASK 0x6 #define CFG_UART_MUX_SHIFT 1 #define CFG_LPUART_EN 0x2 @@ -105,7 +103,6 @@ #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \ CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_WRITE_SWAPPED_DATA /* @@ -342,8 +339,6 @@ #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - /* * Environment */ diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 8ed1dce..df699bc 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -13,7 +13,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define SPD_EEPROM_ADDRESS 0x51 #define CONFIG_SYS_SPD_BUS_NUM 0 @@ -128,8 +127,6 @@ #define FM1_10GEC1_PHY_ADDR 0x0 #define FDT_SEQ_MACADDR_FROM_ENV - -#define CONFIG_ETHPRIME "FM1@DTSEC3" #endif #endif @@ -143,6 +140,8 @@ #endif #endif +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" + #include <asm/fsl_secure_boot.h> #endif /* __LS1046ARDB_H__ */ diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 33b70c8..0c73a9e 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -17,7 +17,6 @@ #define SPL_NO_SATA #define SPL_NO_QSPI #define SPL_NO_IFC -#undef CONFIG_DISPLAY_CPUINFO #endif #include <asm/arch/stream_id_lsch3.h> @@ -108,11 +107,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 -/* Define phy_reset function to boot the MC based on mcinitcmd. - * This happens late enough to properly fixup u-boot env MAC addresses. - */ -#define CONFIG_RESET_PHY_R - /* * Carve out a DDR region which will not be used by u-boot/Linux * @@ -132,13 +126,10 @@ unsigned long long get_qixis_addr(void); #endif /* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 -/* #define CONFIG_DISPLAY_CPUINFO */ - #ifndef SPL_NO_ENV /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 2d33ab0..9e4db33 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -311,12 +311,6 @@ #endif #endif -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#endif - #define CONFIG_FSL_MEMAC /* MMC */ @@ -516,8 +510,6 @@ #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf -#define CONFIG_ETHPRIME "DPMAC1@xgmii" - #endif #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 4cb5d75..0a1a48b 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -222,12 +222,6 @@ #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#endif - #define CONFIG_FSL_MEMAC #ifndef SPL_NO_ENV @@ -455,8 +449,6 @@ #define QSGMII2_PORT2_PHY_ADDR 0x1d #define QSGMII2_PORT3_PHY_ADDR 0x1e #define QSGMII2_PORT4_PHY_ADDR 0x1f - -#define CONFIG_ETHPRIME "DPMAC1@xgmii" #endif #endif diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index f2725af..9027bd0 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -120,11 +120,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 -/* Define phy_reset function to boot the MC based on mcinitcmd. - * This happens late enough to properly fixup u-boot env MAC addresses. - */ -#define CONFIG_RESET_PHY_R - /* * Carve out a DDR region which will not be used by u-boot/Linux * @@ -139,7 +134,6 @@ unsigned long long get_qixis_addr(void); /* Physical Memory Map */ /* fixme: these need to be checked against the board */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 7554de1..68ccc27 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -27,7 +27,6 @@ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 #endif @@ -444,8 +443,6 @@ #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf -#define CONFIG_ETHPRIME "DPMAC1@xgmii" - #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 1c05b08..1e90f94 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -37,7 +37,6 @@ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 #endif @@ -505,7 +504,6 @@ #define AQ_PHY_ADDR3 0x02 #define AQ_PHY_ADDR4 0x03 #define AQR405_IRQ_MASK 0x36 -#define CONFIG_ETHPRIME "DPMAC1@xgmii" #include <asm/fsl_secure_boot.h> diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 7fa4f00..19fd702 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -92,7 +92,6 @@ #ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ #define CONFIG_PHY_BASE_ADR 7 -#undef CONFIG_RESET_PHY_R #endif /* CONFIG_CMD_NET */ #ifdef CONFIG_SATA diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 4f4b571..38c4c31 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -34,7 +34,6 @@ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 #define CONFIG_SYS_MONITOR_LEN (936 * 1024) /* Miscellaneous configurable options */ @@ -69,11 +68,6 @@ #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 -/* Define phy_reset function to boot the MC based on mcinitcmd. - * This happens late enough to properly fixup u-boot env MAC addresses. - */ -#define CONFIG_RESET_PHY_R - /* * Carve out a DDR region which will not be used by u-boot/Linux * diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index a07ebeb..e7aec6b 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -22,9 +22,6 @@ u8 qixis_esdhc_detect_quirk(void); #endif /* MAC/PHY configuration */ -#if defined(CONFIG_FSL_MC_ENET) -#define CONFIG_ETHPRIME "DPMAC17@rgmii-id" -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index a8a9f82..5c4ea27 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -11,11 +11,6 @@ /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 4 -/* MAC/PHY configuration */ -#if defined(CONFIG_FSL_MC_ENET) -#define CONFIG_ETHPRIME "DPMAC1@xgmii" -#endif - /* EMC2305 */ #define I2C_MUX_CH_EMC2305 0x09 #define I2C_EMC2305_ADDR 0x4D diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h index c2fa579..126d226 100644 --- a/include/configs/lx2162aqds.h +++ b/include/configs/lx2162aqds.h @@ -25,11 +25,6 @@ u8 qixis_esdhc_detect_quirk(void); #define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk() #endif -/* MAC/PHY configuration */ -#if defined(CONFIG_FSL_MC_ENET) -#define CONFIG_ETHPRIME "DPMAC17@rgmii-id" -#endif - /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 8486cf8..dd803e7 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -72,8 +72,6 @@ #define IMX_FEC_BASE FEC_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x0 #define CONFIG_DISCOVER_PHY -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC0" #endif #define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */ @@ -119,11 +117,6 @@ /* Watchdog */ /* - * Boot Linux - */ -#define CONFIG_BOOTFILE "boot/fitImage" - -/* * NAND SPL */ #define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx" diff --git a/include/configs/malta.h b/include/configs/malta.h index 6d150fd..84e5f98 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -27,7 +27,6 @@ /* * Memory map */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #ifdef CONFIG_64BIT # define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 073c5a5..e4df9d8 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -64,6 +64,5 @@ /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SYS_SDRAM_SIZE SZ_1G -#define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 55f64b5..6b6c90e 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -38,11 +38,6 @@ */ /* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* * SDRAM: 1 bank, min 32, max 128 MB * Initialized before u-boot gets started. */ @@ -71,24 +66,9 @@ # define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) #endif -/* Ethernet */ -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#undef CONFIG_RESET_PHY_R - /* hw-controller addresses */ #define CONFIG_ET1100_BASE 0x70000000 -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env in dataflash on CS0 */ - -#elif CONFIG_SYS_USE_NANDFLASH - -/* bootstrap + u-boot + env + linux in nandflash */ - -#endif - #define CONFIG_SYS_CBSIZE 512 #endif diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index fd5a9cf..744e20e 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -37,11 +37,6 @@ #define XILINX_DCACHE_BYTE_SIZE 32768 #endif -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* size of console buffer */ #define CONFIG_SYS_CBSIZE 512 /* max number of command args */ @@ -124,10 +119,6 @@ BOOTENV #endif -#if defined(CONFIG_XILINX_AXIEMAC) -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 -#endif - /* SPL part */ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mt7620.h b/include/configs/mt7620.h index 5a88627..703efcd 100644 --- a/include/configs/mt7620.h +++ b/include/configs/mt7620.h @@ -10,8 +10,6 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ 290000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h index 8c4455b..1008aaa 100644 --- a/include/configs/mt7628.h +++ b/include/configs/mt7628.h @@ -10,8 +10,6 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ 290000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index fd9ce34..06882fb 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -40,12 +40,6 @@ */ #define DEFAULT_ENV_IS_RW /* required for configuring default fdtfile= */ -/* - * Ethernet Driver configuration - */ -#define CONFIG_ARP_TIMEOUT 200 -#define CONFIG_NET_RETRY_COUNT 50 - #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) /* diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index 44bba65..8e325e8 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -33,12 +33,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* - * Ethernet Driver configuration - */ -#define CONFIG_ARP_TIMEOUT 200 -#define CONFIG_NET_RETRY_COUNT 50 - #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) /* USB ethernet */ diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index 370f000..ab466b6 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -22,9 +22,6 @@ /* Ethernet */ -/* Booting Linux */ -#define CONFIG_BOOTFILE "uImage" - /* Extra Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ "update_sd_firmware_filename=u-boot.sd\0" \ diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index 552bf5a..3fb0003 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -30,9 +30,6 @@ #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) #endif -/* Boot Linux */ -#define CONFIG_BOOTFILE "uImage" - /* Extra Environments */ #define CONFIG_EXTRA_ENV_SETTINGS \ "update_sd_firmware_filename=u-boot.sd\0" \ diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index caad95b..fe096d4 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -44,9 +44,6 @@ #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) #endif -/* Boot Linux */ -#define CONFIG_BOOTFILE "uImage" - /* Extra Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ "ubifs_file=filesystem.ubifs\0" \ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index dc5891e..f299cc0 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -44,8 +44,6 @@ /* Framebuffer and LCD */ -#define CONFIG_ETHPRIME "FEC0" - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -105,8 +103,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_ARP_TIMEOUT 200UL - /* * Miscellaneous configurable options */ diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index 16c2241..fafc5f1 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -54,8 +54,6 @@ "fdtfile=imx53-cx9020.dtb\0" \ BOOTENV -#define CONFIG_ARP_TIMEOUT 200UL - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 01ed221..43455aa 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -23,7 +23,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* PMIC Controller */ -#define CONFIG_DIALOG_POWER #define CONFIG_POWER_FSL #define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 @@ -31,9 +30,6 @@ /* Command definition */ - -#define CONFIG_ETHPRIME "FEC0" - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -91,8 +87,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_ARP_TIMEOUT 200UL - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 8f8dfe9..572261b 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -85,8 +85,6 @@ "video-mode=" \ "lcd:800x480-24@60,monitor=lcd\0" \ -#define CONFIG_ARP_TIMEOUT 200UL - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 5ff931e..a0e4817 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -18,7 +18,6 @@ #endif #endif -#define CONFIG_BOARD_POSTCLK_INIT #define CONFIG_MXC_GPT_HCLK #define CONFIG_SYS_BOOTM_LEN 0x1000000 diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 1c25857..832f73f 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -24,7 +24,6 @@ #endif /* Framebuffer */ -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index c1c012b..d7408e0 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -136,8 +136,6 @@ "echo WARNING: Could not determine dtb to use; fi; " \ "fi;\0" \ -#define CONFIG_ARP_TIMEOUT 200UL - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -153,7 +151,6 @@ /* Environment organization */ /* Framebuffer */ -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 953f071..372cf8d 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -101,9 +101,6 @@ #define IMX_FEC_BASE ENET2_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" - #ifdef CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 8bc8674..b679d13 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -129,9 +129,6 @@ #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1 -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" - #ifdef CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) @@ -148,7 +145,6 @@ #ifndef CONFIG_SPL_BUILD #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR #endif #endif diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index c24578a..17e7ae0 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -137,19 +137,14 @@ #if (CONFIG_FEC_ENET_DEV == 0) #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x2 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "eth0" #elif (CONFIG_FEC_ENET_DEV == 1) #define IMX_FEC_BASE ENET2_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "eth1" #endif #endif #ifndef CONFIG_SPL_BUILD #if defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif #endif diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 6bcca11..dfcdc00 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -124,11 +124,6 @@ #ifdef CONFIG_CMD_NET #define CONFIG_FEC_ENET_DEV 1 -#if (CONFIG_FEC_ENET_DEV == 0) -#define CONFIG_ETHPRIME "eth0" -#elif (CONFIG_FEC_ENET_DEV == 1) -#define CONFIG_ETHPRIME "eth1" -#endif #endif #endif diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index 2e976df..76c374a 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -31,8 +31,6 @@ /* MMC */ -#define CONFIG_ARMV7_SECURE_BASE 0x00900000 - /* * If we have defined the OPTEE ram size and not OPTEE it means that we were * launched by OPTEE, because of that we shall skip all the low level diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index d5b38fd..d411b1a 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -122,8 +122,4 @@ #define CONFIG_USBD_HS -#ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_BMP_LOGO -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index 75f5cf0..d3ba144 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -15,7 +15,6 @@ #include "imx7ulp_spl.h" #endif -#define CONFIG_BOARD_POSTCLK_INIT #define CONFIG_SYS_BOOTM_LEN 0x1000000 /* @@ -71,7 +70,5 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#define CONFIG_ARMV7_SECURE_BASE 0x2F000000 - #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 8f2cbc6..e80d748 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_BOARD_POSTCLK_INIT #define CONFIG_SYS_BOOTM_LEN 0x1000000 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 591c572..8dcc45c 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -94,16 +94,6 @@ #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } /* Default baudrate can be overridden by board! */ -/* FEC Ethernet on SoC */ -#ifdef CONFIG_FEC_MXC -#ifndef CONFIG_ETHPRIME -#define CONFIG_ETHPRIME "FEC0" -#endif -#ifndef CONFIG_FEC_XCV_TYPE -#define CONFIG_FEC_XCV_TYPE RMII -#endif -#endif - /* NAND */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 678b433..afa4ca5 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -29,8 +29,6 @@ #endif #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 6 /* USB Configs */ diff --git a/include/configs/novena.h b/include/configs/novena.h index 1ce2f4e..dbde7a0 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -25,7 +25,6 @@ */ /* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" #define CONFIG_HOSTNAME "novena" /* Physical Memory Map */ @@ -43,11 +42,6 @@ /* SPL */ #include "imx6_spl.h" /* common IMX6 SPL configuration */ -/* Ethernet Configuration */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_ETH -#endif - /* I2C */ #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h index eb32d83..1e40fad 100644 --- a/include/configs/npi_imx6ull.h +++ b/include/configs/npi_imx6ull.h @@ -48,8 +48,6 @@ #ifdef CONFIG_CMD_NET #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "eth0" #endif #define CONFIG_FEC_ENET_DEV 1 diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index ccf4519..485a3fe 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -27,7 +27,6 @@ #ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 1 -#define CONFIG_RESET_PHY_R #endif /* CONFIG_CMD_NET */ /* SATA driver configuration */ diff --git a/include/configs/nsim.h b/include/configs/nsim.h index 62169af..de07b6b 100644 --- a/include/configs/nsim.h +++ b/include/configs/nsim.h @@ -11,7 +11,6 @@ /* * Memory configuration */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -23,11 +22,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_32M /* - * Environment configuration - */ -#define CONFIG_BOOTFILE "uImage" - -/* * Console configuration */ diff --git a/include/configs/o4-imx6ull-nano.h b/include/configs/o4-imx6ull-nano.h index 72515a3..7777935 100644 --- a/include/configs/o4-imx6ull-nano.h +++ b/include/configs/o4-imx6ull-nano.h @@ -17,10 +17,6 @@ # define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* CONFIG_CMD_USB */ -#if IS_ENABLED(CONFIG_FEC_MXC) -# define CONFIG_FEC_XCV_TYPE RMII -#endif /* CONFIG_FEC_MXC */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "mmcdev=0\0" \ "mmcpart=2\0" \ diff --git a/include/configs/octeon_common.h b/include/configs/octeon_common.h index 23bb4f6..2e4bfd0 100644 --- a/include/configs/octeon_common.h +++ b/include/configs/octeon_common.h @@ -15,7 +15,6 @@ #endif #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index 536dff2..6ec2d3e 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -16,14 +16,6 @@ /** Stack starting address */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xffff0) -/* Autoboot options */ -#define CONFIG_RESET_TO_RETRY -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_BOOT_RETRY_MIN 30 - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - /** Extra environment settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=20080000\0" \ diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 8185f4b..bcf8b41 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -45,14 +45,6 @@ /** Heap size for U-Boot */ -/* Autoboot options */ -#define CONFIG_RESET_TO_RETRY -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_BOOT_RETRY_MIN 30 - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* AHCI support Definitions */ #ifdef CONFIG_DM_SCSI /** Enable 48-bit SATA addressing */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index ed9b41d..42031bb 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -30,8 +30,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - /* Partitions name */ #define PARTS_BOOT "boot" #define PARTS_ROOT "platform" diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index a482598..616f25e 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -10,8 +10,6 @@ #include <configs/exynos5420-common.h> #include <configs/exynos5-common.h> -#define CONFIG_BOARD_COMMON - #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define TZPC_BASE_OFFSET 0x10000 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 4719184..d3839eb 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -157,9 +157,6 @@ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_SIZE 0x4000000 -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ /* Defines for SPL */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 45297b9..0d69316 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -137,16 +137,8 @@ #endif /* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* * U-Boot general configuration */ -#define CONFIG_BOOTFILE "zImage" /* Boot file name */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ @@ -179,10 +171,6 @@ "boot_fit=0\0" \ "console=ttyS2,115200n8\0" -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - /* SD/MMC */ /* defines for SPL */ diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index ac8eb05..1f28871 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -12,10 +12,6 @@ #ifdef CONFIG_SPL #include "imx6_spl.h" - -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_REGULATOR -#endif #endif /* Miscellaneous configurable options */ @@ -41,7 +37,6 @@ /* LCD */ #ifndef CONFIG_SPL_BUILD #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif #endif @@ -49,18 +44,17 @@ /* Environment is stored in the eMMC boot partition */ #define CONFIG_ENV_VERSION 100 -#define CONFIG_BOARD_NAME opos6ul #define ACFG_CONSOLE_DEV ttymxc0 #define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" +#define CONFIG_ROOTPATH "/tftpboot/opos6ul-root" #define CONFIG_EXTRA_ENV_SETTINGS \ "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \ "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \ - "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \ + "board_name=opos6ul\0" \ "fdt_addr=0x88000000\0" \ "fdt_high=0xffffffff\0" \ - "fdt_name=" __stringify(CONFIG_BOARD_NAME) "dev\0" \ + "fdt_name=opos6uldev\0" \ "initrd_high=0xffffffff\0" \ "ip_dyn=yes\0" \ "stdin=serial\0" \ @@ -70,7 +64,7 @@ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ - "kernelimg=" __stringify(CONFIG_BOARD_NAME) "-linux.bin\0" \ + "kernelimg=opos6ul-linux.bin\0" \ "splashpos=0,0\0" \ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \ diff --git a/include/configs/origen.h b/include/configs/origen.h index 1caeed6..278c204 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -21,8 +21,6 @@ #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - /* Power Down Modes */ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 @@ -46,8 +44,6 @@ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" -#define CONFIG_CLK_1000_400_200 - /* MIU (Memory Interleaving Unit) */ #define CONFIG_MIU_2BIT_21_7_INTERLEAVED @@ -58,9 +54,4 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 -/* U-Boot copy size from boot Media to DRAM.*/ -#define COPY_BL2_SIZE 0x80000 -#define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) -#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) - #endif /* __CONFIG_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 92008cd..c2fc3b0 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -13,7 +13,6 @@ #include <linux/stringify.h> #if defined(CONFIG_TARGET_P1020RDB_PC) -#define CONFIG_BOARDNAME "P1020RDB-PC" #define CONFIG_VSC7385_ENET #define CONFIG_SLIC #define __SW_BOOT_MASK 0x03 @@ -39,7 +38,6 @@ * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off */ #if defined(CONFIG_TARGET_P1020RDB_PD) -#define CONFIG_BOARDNAME "P1020RDB-PD" #define CONFIG_VSC7385_ENET #define CONFIG_SLIC #define __SW_BOOT_MASK 0x03 @@ -55,7 +53,6 @@ #endif #if defined(CONFIG_TARGET_P2020RDB) -#define CONFIG_BOARDNAME "P2020RDB-PC" #define CONFIG_VSC7385_ENET #define __SW_BOOT_MASK 0x03 #define __SW_BOOT_NOR 0xc8 @@ -125,16 +122,6 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -#ifndef CONFIG_SYS_MONITOR_BASE -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE 0xf8f81000 -#elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif -#endif - #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ @@ -145,7 +132,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_L2_CACHE -#define CONFIG_BTB #define CONFIG_ENABLE_36BIT_PHYS @@ -165,10 +151,8 @@ #if defined(CONFIG_TARGET_P1020RDB_PD) #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 #else #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 #endif #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 @@ -327,9 +311,6 @@ #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE #endif /* CPLD config size: 1Mb */ -#define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ - BR_PS_8 | BR_V) -#define CONFIG_CPLD_OR_PRELIM (0xfff009f7) #define CONFIG_SYS_PMC_BASE 0xff980000 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE @@ -488,12 +469,6 @@ #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 #endif /* CONFIG_TSEC_ENET */ /* @@ -549,7 +524,6 @@ */ #define CONFIG_HOSTNAME "unknown" #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #ifdef __SW_BOOT_NOR diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index bcc0781..ef3b0f7 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x88000000 #define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Memory Test */ @@ -44,18 +43,6 @@ */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/*----------------------------------------------------------------------- - * Networking Configuration - */ -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_ARP_TIMEOUT 500 /* millisec */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - /*-------------------------------------------------- * USB Configuration */ diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h index 4700fff..536e07b 100644 --- a/include/configs/pico-imx6.h +++ b/include/configs/pico-imx6.h @@ -130,12 +130,9 @@ /* Ethernet Configuration */ #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 1 /* Framebuffer */ -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index d87bcf4..2646f19 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -29,7 +29,6 @@ #define IMX_FEC_BASE ENET2_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1 -#define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_MXC_UART_BASE UART6_BASE_ADDR @@ -130,7 +129,6 @@ #define CONFIG_BOARD_SIZE_LIMIT 715776 #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index eb87073..a90befc 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -119,10 +119,6 @@ #define CONFIG_POWER_PFUZE3000 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 -#ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_BMP_LOGO -#endif - /* FLASH and environment organization */ /* Environment starts at 768k = 768 * 1024 = 786432 */ diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 7bfa790..a7ad4f3 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -25,16 +25,11 @@ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE - -#undef CONFIG_DM_MMC #endif /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_ETHPRIME "FEC" - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 1 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index f3196ee..1db8279 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -130,17 +130,6 @@ /* LCD */ #define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 /* SDRAM */ #define PHYS_SDRAM 0x20000000 @@ -171,35 +160,13 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#undef CONFIG_SYS_USE_DATAFLASH_CS0 -#undef CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SYS_USE_FLASH 1 - -#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ - -#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ - -/* bootstrap + u-boot + env + linux in nandflash */ - -#elif defined (CONFIG_SYS_USE_FLASH) -/* JFFS Partition offset set */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -/* 512k reserved for u-boot */ -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 - -#define CONFIG_CON_ROT "fbcon=rotate:3 " - #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ - CONFIG_CON_ROT \ + "fbcon=rotate:3 " \ "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ "addip=setenv bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ @@ -210,9 +177,6 @@ "run nfsargs;run addip;bootm 22000000\0" \ "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ "" -#else -#error "Undefined memory device" -#endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 4856f61..143e9f5 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -141,19 +141,6 @@ */ /* LCD */ #define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1 - -#define CONFIG_LCD_IN_PSRAM 1 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 /* SDRAM */ #define PHYS_SDRAM 0x20000000 @@ -196,37 +183,13 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USE_FLASH 1 -#undef CONFIG_SYS_USE_DATAFLASH -#undef CONFIG_SYS_USE_NANDFLASH - -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ - -#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ - -/* bootstrap + u-boot + env + linux in nandflash */ - -#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ -/* JFFS Partition offset set */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -/* 512k reserved for u-boot */ -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 - -#define CONFIG_ROOTPATH "/ronetix/rootfs" - -#define CONFIG_CON_ROT "fbcon=rotate:3 " - #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ - CONFIG_CON_ROT \ + "fbcon=rotate:3 " \ "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ "addip=setenv bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ @@ -238,10 +201,6 @@ "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ "" -#else -#error "Undefined memory device" -#endif - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index b205391..b858aaa 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -19,14 +19,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x70000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 @@ -47,10 +39,6 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD3 #endif -/* Ethernet */ -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY - #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ #elif CONFIG_SD_BOOT @@ -83,7 +71,6 @@ 56, 57, 58, 59, 60, 61, 62, 63, } #endif -#define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK 132096000 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 #define CONFIG_SYS_MCKR 0x1301 diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 51c802f..cb22150 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -31,8 +31,5 @@ */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#ifdef CONFIG_RESET_PHY_R -#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ -#endif #endif /* _CONFIG_POGO_E02_H */ diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h index f8555f6..3365ebe 100644 --- a/include/configs/pogo_v4.h +++ b/include/configs/pogo_v4.h @@ -38,9 +38,6 @@ */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#ifdef CONFIG_RESET_PHY_R -#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ -#endif /* * Support large disk for SATA and USB diff --git a/include/configs/pomelo.h b/include/configs/pomelo.h new file mode 100644 index 0000000..cdd6cdb --- /dev/null +++ b/include/configs/pomelo.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2021 + * lixinde <lixinde@phytium.com.cn> + * weichangzheng <weichangzheng@phytium.com.cn> + */ + +#ifndef __POMELO_CONFIG_H__ +#define __POMELO_CONFIG_H__ + +/* SDRAM Bank #1 start address */ +#define CONFIG_SYS_SDRAM_BASE 0x80000000 + +/* SIZE of malloc pool */ +#define CONFIG_SYS_INIT_SP_ADDR (0x29800000 + 0x1a000) + +/*BOOT*/ +#define CONFIG_SYS_BOOTM_LEN 0x3c00000 + +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES(func) \ + func(SCSI, scsi, 0) \ + +#include <config_distro_bootcmd.h> +#endif + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "image=Image\0" \ + BOOTENV \ + "scriptaddr=0x90100000\0" \ + "kernel_addr_r=0x90200000\0" \ + "fdt_addr_r=0x95000000\0" \ + "boot_fit=no\0" \ + "fdtfile=phytium-pomelo.dtb\0" \ + +#endif + diff --git a/include/configs/porter.h b/include/configs/porter.h index 867dada..661b7ea 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -32,7 +32,6 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 30185b1..3295d43 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -36,9 +36,6 @@ #define CONFIG_SYS_SERIAL0 PER_UART0_CFG #define CONFIG_SYS_SERIAL1 PER_UART1_CFG -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* SDRAM Bank #1 */ #define DDR_BASE 0x00000000 #define PHYS_SDRAM_1 DDR_BASE diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 753fc14..7272470 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -74,12 +74,4 @@ #endif #endif /* CONFIG_SPL_BUILD */ -#if defined(CONFIG_VIDEO) -#define CONFIG_VIDEO_DA8XX -#define CONFIG_VIDEO_BMP_LOGO -#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE -#define PWM_TICKS 0x1388 -#define PWM_DUTY 0x200 -#endif - #endif /* ! __CONFIG_PXM2_H */ diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h index d45f606..4f042e5 100644 --- a/include/configs/qemu-arm.h +++ b/include/configs/qemu-arm.h @@ -65,8 +65,6 @@ #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MAX_FLASH_SECT 256 /* Sector: 256K, Bank: 64M */ -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #endif /* __CONFIG_H */ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index e257c0e..136a2df 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -43,12 +43,8 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_CHIP_SELECTS_PER_CTRL 0 - #define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_HWCONFIG #define CONFIG_SYS_INIT_RAM_ADDR 0x00100000 @@ -93,7 +89,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); * Environment Configuration */ #define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #endif /* __QEMU_PPCE500_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 04b3481..869f9f5 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_PBSIZE 256 /* Address of u-boot image in Flash */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index f1f5d07..9bc2443 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -25,19 +25,8 @@ #define CONFIG_SYS_SDRAM_BASE (RCAR_GEN2_SDRAM_BASE) #define CONFIG_SYS_SDRAM_SIZE (RCAR_GEN2_UBOOT_SDRAM_SIZE) -#define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) -/* ENV setting */ - -/* Common ENV setting */ - -/* SF MTD */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_SPI -#undef CONFIG_DM_SPI_FLASH -#endif - /* Timer */ #define CONFIG_TMU_TIMER #define CONFIG_SYS_TIMER_COUNTS_DOWN diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 07a30d0..2422f03 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -41,7 +41,6 @@ #define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE) -#define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_SYS_MONITOR_LEN (1 * 1024 * 1024) #define CONFIG_SYS_BOOTM_LEN (64 << 20) diff --git a/include/configs/rpi.h b/include/configs/rpi.h index d5e064f..7a5f085 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -41,10 +41,7 @@ #endif /* Devices */ -/* GPIO */ -#define CONFIG_BCM2835_GPIO /* LCD */ -#define CONFIG_VIDEO_BCM2835 /* DFU over USB/UDC */ #ifdef CONFIG_CMD_DFU diff --git a/include/configs/rut.h b/include/configs/rut.h index 02d330e..b30b12a 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -67,14 +67,4 @@ #endif /* CONFIG_SPL_BUILD */ -#if defined(CONFIG_VIDEO) -#define CONFIG_VIDEO_DA8XX -#define CONFIG_VIDEO_BMP_LOGO -#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE - -#define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */ -#define CONFIG_FORMIKE -#define DISPL_PLL_SPREAD_SPECTRUM -#endif - #endif /* ! __CONFIG_RUT_H */ diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 632fc0c..882d19a 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -19,7 +19,6 @@ * System memory Configuration */ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MEM_SIZE 0x40000000 #define CONFIG_SYS_SDRAM_BASE 0x71000000 @@ -89,12 +88,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /*----------------------------------------------------------------------- - * Etc Command definition - */ -#undef CONFIG_BOOTM_NETBSD -#undef CONFIG_BOOTM_RTEMS - -/*----------------------------------------------------------------------- * serial console configuration */ #define CONFIG_PL011_CLOCK 50000000 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index e3b091a..0ec60ca 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -134,7 +134,6 @@ #define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */ #define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */ -#define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ /* FLASH and environment organization */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 29adab3..8cbdbc7 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -26,8 +26,6 @@ #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ #define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 9542b0d..764bc1b 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -11,15 +11,11 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index eb96e50..772805d 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -17,14 +17,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID 0 /* ignored in arm */ -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0) * NB: in this case, USB 1.1 devices won't be recognized. diff --git a/include/configs/sama7g5ek.h b/include/configs/sama7g5ek.h index 2aec9ff..bca7166 100644 --- a/include/configs/sama7g5ek.h +++ b/include/configs/sama7g5ek.h @@ -24,7 +24,4 @@ GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_ARP_TIMEOUT 200 -#define CONFIG_NET_RETRY_COUNT 50 - #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 75efbf3..71b4799 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_SDRAM_BASE 0 #define CONFIG_SYS_SDRAM_SIZE \ (SB_TO_UL(CONFIG_SANDBOX_RAM_SIZE_MB) << 20) -#define CONFIG_SYS_MONITOR_BASE 0 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 615458c..bfadf4a 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -104,13 +104,6 @@ */ #ifndef CONFIG_SPL_BUILD -/* - * USB configuration - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST /* USB DRACO ID as default */ #define CONFIG_USBD_HS @@ -133,8 +126,6 @@ * 0x442000 - 0x800000 : Userland */ -#define CONFIG_NET_RETRY_COUNT 10 - /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND /* UBI Support */ @@ -414,8 +405,4 @@ #endif #endif -/* Reboot after 60 sec if bootcmd fails */ -#define CONFIG_RESET_TO_RETRY -#define CONFIG_BOOT_RETRY_TIME 60 - #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ diff --git a/include/configs/silinux-ek874.h b/include/configs/silinux-ek874.h index 25c0cd2..a99babb 100644 --- a/include/configs/silinux-ek874.h +++ b/include/configs/silinux-ek874.h @@ -11,9 +11,6 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/silk.h b/include/configs/silk.h index 29350a6..fa195c6 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -32,7 +32,6 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 8bfd1fc..aca7870 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -46,7 +46,6 @@ /* setting board specific options */ #define CONFIG_SYS_AUTOLOAD "yes" -#define CONFIG_RESET_TO_RETRY /* The LED PINs */ #define CONFIG_RED_LED AT91_PIN_PA9 @@ -73,25 +72,10 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - /* serial console */ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS -/* - * Ethernet configuration - * - */ -#define CONFIG_RMII /* use reduced MII inteface */ -#define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* BOOTP and DHCP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - #if !defined(CONFIG_SPL_BUILD) /* USB configuration */ #define CONFIG_USB_ATMEL @@ -150,7 +134,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K @@ -164,7 +147,6 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } -#define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK (198656000/2) #define AT91_PLL_LOCK_TIMEOUT 1000000 #define CONFIG_SYS_AT91_PLLA 0x2060bf09 diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index d7e86f2..1ea3b65 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -15,6 +15,4 @@ #undef CONFIG_EXYNOS_FB #undef CONFIG_EXYNOS_DP -#define CONFIG_BOARD_COMMON - #endif /* __CONFIG_SMDK_H */ diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 38691b6..f26995d 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -15,8 +15,6 @@ #undef CONFIG_EXYNOS_FB #undef CONFIG_EXYNOS_DP -#define CONFIG_BOARD_COMMON - #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 28ff48b..4401094 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -97,8 +97,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */ -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - /*----------------------------------------------------------------------- * FLASH and environment organization */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index f113fa4..9ff05fc 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -10,7 +10,6 @@ #include "exynos4-common.h" -#undef CONFIG_BOARD_COMMON #undef CONFIG_USB_GADGET_DWC2_OTG_PHY /* High Level Configuration Options */ @@ -39,8 +38,6 @@ /* FLASH and environment organization */ -#define CONFIG_CLK_1000_400_200 - /* MIU (Memory Interleaving Unit) */ #define CONFIG_MIU_2BIT_INTERLEAVED @@ -51,11 +48,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 -/* U-Boot copy size from boot Media to DRAM.*/ -#define COPY_BL2_SIZE 0x80000 -#define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) -#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) - /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_ENV_SROM_BANK 1 diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 10f8fde..f7ee9db 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -37,13 +37,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -/* Ethernet */ -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_TFTP_PORT - /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB @@ -54,8 +47,6 @@ #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 /* GPIOs and IO expander */ -#define CONFIG_ATMEL_LEGACY -#define CONFIG_AT91_GPIO_PULLUP 1 #define CONFIG_PCA953X #define CONFIG_SYS_I2C_PCA953X_ADDR 0x28 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x28, 16} } @@ -91,8 +82,6 @@ /* Boot options */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* Environment settings */ /* Console settings */ diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 3889a88..0e3567f 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -38,27 +38,10 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 -/* Ethernet */ -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_TFTP_PORT - -/* LCD */ -#define CONFIG_ATMEL_LCD -#define CONFIG_GURNARD_SPLASH - -/* GPIOs and IO expander */ -#define CONFIG_ATMEL_LEGACY -#define CONFIG_AT91_GPIO_PULLUP 1 - /* UARTs/Serial console */ /* Boot options */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* Environment settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/snow.h b/include/configs/snow.h index c082b2d8..00d9b4d 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -15,6 +15,4 @@ #include <configs/exynos5-dt-common.h> #include <configs/exynos5-common.h> -#define CONFIG_BOARD_COMMON - #endif /* __CONFIG_SNOW_H */ diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 0935eae..88fd8ae 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -24,23 +24,11 @@ */ #define CONFIG_SYS_I2C_RTC_ADDR 0x68 -/* Booting Linux */ -#define CONFIG_BOOTFILE "zImage" - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Environment settings */ /* - * Autoboot - * - * After 45s of inactivity in the prompt, the board will reset. - * Set 'bootretry' in the environment to -1 to disable this behavior - */ -#define CONFIG_BOOT_RETRY_TIME 45 -#define CONFIG_RESET_TO_RETRY - -/* * FPGA Remote Update related environment * * Note that since those commands access the FPGA, the HPS-to-FPGA diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 5294494..e094bef 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -8,11 +8,6 @@ #include <linux/stringify.h> /* - * High level configuration - */ -#define CONFIG_CLOCKS - -/* * Memory configurations */ #define PHYS_SDRAM_1 0x0 diff --git a/include/configs/socfpga_dbm_soc1.h b/include/configs/socfpga_dbm_soc1.h index 8acddbe..8f1c2de 100644 --- a/include/configs/socfpga_dbm_soc1.h +++ b/include/configs/socfpga_dbm_soc1.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */ -/* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" - /* Environment is in MMC */ /* Extra Environment */ diff --git a/include/configs/socfpga_is1.h b/include/configs/socfpga_is1.h index 06337d4..468a35d 100644 --- a/include/configs/socfpga_is1.h +++ b/include/configs/socfpga_is1.h @@ -11,13 +11,7 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x10000000 -/* Booting Linux */ -#define CONFIG_BOOTFILE "zImage" - /* Ethernet on SoC (EMAC) */ -#if defined(CONFIG_CMD_NET) -#define CONFIG_ARP_TIMEOUT 500UL -#endif /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index 3aa231c..e76438e 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on MCV */ -/* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" - /* Environment is in MMC */ /* Extra Environment */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 51dc2e4..b810567 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -14,7 +14,6 @@ /* * U-Boot general configurations */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */ #define CPU_RELEASE_ADDR 0xFFD12210 @@ -72,13 +71,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); /* * Environment variable */ - -#ifdef CONFIG_FIT -#define CONFIG_BOOTFILE "kernel.itb" -#else -#define CONFIG_BOOTFILE "Image" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "bootfile=" CONFIG_BOOTFILE "\0" \ @@ -144,9 +136,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); /* * L4 Watchdog */ -#ifndef CONFIG_SPL_BUILD -#undef CONFIG_DESIGNWARE_WATCHDOG -#endif #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS #ifdef CONFIG_TARGET_SOCFPGA_STRATIX10 #ifndef __ASSEMBLY__ diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 2905e0e..8469b15 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -11,7 +11,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */ /* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" #define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MiB */ /* Extra Environment */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index a51a162..687e3a8 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -42,7 +42,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ #define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ @@ -61,7 +60,6 @@ #define CONFIG_VERY_BIG_RAM #define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */ @@ -98,8 +96,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -157,10 +153,6 @@ #define TSEC3_FLAGS TSEC_GIGABIT /* Options are: TSEC[0,1] */ -#define CONFIG_ETHPRIME "TSEC0" - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 /* * Environment @@ -170,11 +162,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* * Miscellaneous configurable options */ diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h index 768e33d..9946fe9 100644 --- a/include/configs/somlabs_visionsom_6ull.h +++ b/include/configs/somlabs_visionsom_6ull.h @@ -80,8 +80,6 @@ #ifdef CONFIG_CMD_NET #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x1 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "eth0" #endif #endif diff --git a/include/configs/spring.h b/include/configs/spring.h index 0b05245..2f0a580 100644 --- a/include/configs/spring.h +++ b/include/configs/spring.h @@ -10,6 +10,4 @@ #include <configs/exynos5-dt-common.h> #include <configs/exynos5-common.h> -#define CONFIG_BOARD_COMMON - #endif /* __CONFIG_SPRING_H */ diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h index 4c464cf..3e6feae 100644 --- a/include/configs/stih410-b2260.h +++ b/include/configs/stih410-b2260.h @@ -31,7 +31,6 @@ func(USB, usb, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x40000000\0" \ "fdtfile=stih410-b2260.dtb\0" \ diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index 175d546..6b40cdb 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -10,12 +10,6 @@ #include <linux/sizes.h> #include <asm/arch/stm32.h> -#ifdef CONFIG_ARMV7_PSCI -/* PSCI support */ -#define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE -#define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE -#endif - /* * Configuration of the external SRAM memory used by U-Boot */ diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index 9d9ac03..72f07e1 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -35,17 +35,9 @@ "" /* Realtime clock */ -#undef CONFIG_MCFRTC #define CONFIG_RTC_MCFRRTC #define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 -/* Timer */ -#define CONFIG_MCFTMR - -/* DSPI and Serial Flash */ -#define CONFIG_CF_DSPI -#define CONFIG_SERIAL_FLASH - #define CONFIG_SYS_SBFHDR_SIZE 0x7 /* Input, PCI, Flexbus, and VCO */ @@ -89,12 +81,6 @@ #define CONFIG_SERIAL_BOOT #endif -#if defined(CONFIG_SERIAL_BOOT) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - #define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) @@ -132,18 +118,11 @@ CONFIG_SYS_INIT_RAM_SIZE - 12) #ifdef CONFIG_MCFFEC -#define CONFIG_MII_INIT 1 #define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ #ifndef CONFIG_SYS_DISCOVER_PHY #define FECDUPLEX FULL #define FECSPEED _100BASET -#else -#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#endif #endif /* CONFIG_SYS_DISCOVER_PHY */ #endif #endif /* __STMARK2_CONFIG_H */ diff --git a/include/configs/stout.h b/include/configs/stout.h index df2d967..f9574be 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -36,7 +36,6 @@ #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 -#define CONFIG_BITBANGMII_MULTI /* Board Clock */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index dd94216..feec869 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -29,9 +29,6 @@ #define CONFIG_DW_ALTDESCRIPTOR -/* Command support defines */ -#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ - /* Misc configuration */ /* diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 1e490da..0b1fedd 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -11,13 +11,6 @@ #define __CONFIG_H /* - * A31 specific configuration - */ - -#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE -#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */ - -/* * Include common sunxi configuration where most the settings are */ #include <configs/sunxi-common.h> diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 803a751..bc2779f 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -9,13 +9,6 @@ #define __CONFIG_H /* - * A20 specific configuration - */ - -#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE -#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */ - -/* * Include common sunxi configuration where most the settings are */ #include <configs/sunxi-common.h> diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 5636356..106139d 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -14,16 +14,6 @@ #include <asm/arch/cpu.h> -#ifdef SUNXI_SRAM_A2_SIZE -/* - * If the SoC has enough SRAM A2, use that for the secure monitor. - * Skip the first 16 KiB of SRAM A2, which is not usable, as only certain bytes - * are writable. Reserve the last 17 KiB for the resume shim and SCP firmware. - */ -#define CONFIG_ARMV7_SECURE_BASE (SUNXI_SRAM_A2_BASE + 16 * 1024) -#define CONFIG_ARMV7_SECURE_MAX_SIZE (SUNXI_SRAM_A2_SIZE - 33 * 1024) -#endif - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 4bab917..c467e9b 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -50,26 +50,15 @@ #ifdef CONFIG_MACH_SUN9I #define SDRAM_OFFSET(x) 0x2##x #define CONFIG_SYS_SDRAM_BASE 0x20000000 -/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here - * since it needs to fit in with the other values. By also #defining it - * we get warnings if the Kconfig value mismatches. */ #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 #elif defined(CONFIG_MACH_SUNIV) #define SDRAM_OFFSET(x) 0x8##x #define CONFIG_SYS_SDRAM_BASE 0x80000000 -/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here - * since it needs to fit in with the other values. By also #defining it - * we get warnings if the Kconfig value mismatches. - */ -#define CONFIG_SPL_STACK_R_ADDR 0x81e00000 #define CONFIG_SPL_BSS_START_ADDR 0x81f80000 #else #define SDRAM_OFFSET(x) 0x4##x #define CONFIG_SYS_SDRAM_BASE 0x40000000 /* V3s do not have enough memory to place code at 0x4a000000 */ -/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here - * since it needs to fit in with the other values. By also #defining it - * we get warnings if the Kconfig value mismatches. */ #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 #endif diff --git a/include/configs/taurus.h b/include/configs/taurus.h index e4609b5..77d80bf 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -34,10 +34,6 @@ /* Misc CPU related */ -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS @@ -67,10 +63,6 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 #endif -/* Ethernet */ -#define CONFIG_RMII -#define CONFIG_AT91_WANTS_COMMON_PHY - /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL @@ -160,7 +152,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K @@ -174,7 +165,6 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } -#define CONFIG_SPL_ATMEL_SIZE #define CONFIG_SYS_MASTER_CLOCK 132096000 #define AT91_PLL_LOCK_TIMEOUT 1000000 #define CONFIG_SYS_AT91_PLLA 0x202A3F01 diff --git a/include/configs/tb100.h b/include/configs/tb100.h index 6e31bd5..09766fe 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -11,7 +11,6 @@ /* * Memory configuration */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -46,11 +45,6 @@ #define ETH1_BASE_ADDRESS 0xFE110000 /* - * Environment configuration - */ -#define CONFIG_BOOTFILE "uImage" - -/* * Console configuration */ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 7cb8d64..d9d89b6 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -95,14 +95,4 @@ #define CONFIG_TEGRA_SPI #endif -/* overrides for SPL build here */ -#ifdef CONFIG_SPL_BUILD - -/* remove USB */ -#ifdef CONFIG_USB_EHCI_TEGRA -#undef CONFIG_USB_EHCI_TEGRA -#endif - -#endif /* CONFIG_SPL_BUILD */ - #endif /* __TEGRA_COMMON_POST_H */ diff --git a/include/configs/ten64.h b/include/configs/ten64.h index 54e65f2..1a62ddf 100644 --- a/include/configs/ten64.h +++ b/include/configs/ten64.h @@ -9,7 +9,6 @@ #include "ls1088a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 3d770f8..d07a8fe 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -33,9 +33,6 @@ #define CONFIG_SYS_SERIAL0 0x87e024000000 #define CONFIG_SYS_SERIAL1 0x87e025000000 -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 0f786ab..95434aa 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -114,7 +114,6 @@ */ /* Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_PHY_ET1011C_TX_CLK_FIX #endif /* ! __CONFIG_TI814X_EVM_H */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 533673b..c2dfdeb 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -68,18 +68,4 @@ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE) -#define CONFIG_NET_RETRY_COUNT 10 - -/* Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif #endif diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 10da123..f8bd555 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -25,11 +25,6 @@ #endif #define CONFIG_SYS_NS16550_CLK 48000000 -#ifndef CONFIG_SPL_BUILD -/* Network defines. */ -#define CONFIG_NET_RETRY_COUNT 10 -#endif - /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 0243016..57f013c 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -63,7 +63,6 @@ #define CONFIG_SYS_SPI_CLK ks_clk_get_rate(KS2_CLK1_6) /* Network Configuration */ -#define CONFIG_NET_RETRY_COUNT 32 #define CONFIG_SYS_SGMII_REFCLK_MHZ 312 #define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 #define CONFIG_SYS_SGMII_RATESCALE 2 diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 270ef95..714a1c5 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -307,8 +307,5 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_TIMER -#endif #endif /* __CONFIG_TI_OMAP5_COMMON_H */ diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index ba6c3f0..f859656 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -17,18 +17,10 @@ /* Fixup settings */ /* SPL settings */ -#undef CONFIG_SPL_ETH #undef CONFIG_SPL_MAX_FOOTPRINT #define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -/* FPGA commands that we don't use */ - -/* Extras */ - -/* Faster flash, ours may run at 108 MHz */ -#undef CONFIG_SPI_FLASH_WINBOND - /* Setup proper boot sequences for Miami boards */ #if defined(CONFIG_USB_HOST) diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index 4d5b470..21c351a 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -9,8 +9,6 @@ #define CONFIG_SYS_MHZ 280 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0xa0000000 diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 633b100..c11e5c1 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -57,8 +57,6 @@ #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_ARP_TIMEOUT 200UL - #if defined(CONFIG_TQMA6X_MMC_BOOT) #define TQMA6_UBOOT_OFFSET SZ_1K diff --git a/include/configs/tqma6_mba6.h b/include/configs/tqma6_mba6.h index a19ea35..899c218 100644 --- a/include/configs/tqma6_mba6.h +++ b/include/configs/tqma6_mba6.h @@ -9,9 +9,6 @@ #ifndef __CONFIG_TQMA6_MBA6_H #define __CONFIG_TQMA6_MBA6_H -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" - #define CONFIG_FEC_MXC_PHYADDR 0x03 #define CONFIG_MXC_UART_BASE UART2_BASE diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h index e68e96d..90db965 100644 --- a/include/configs/tqma6_wru4.h +++ b/include/configs/tqma6_wru4.h @@ -7,8 +7,6 @@ #define __CONFIG_TQMA6_WRU4_H /* Ethernet */ -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 0x01 /* UART */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 5217400..41ac609 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -30,8 +30,6 @@ #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - /* Tizen - partitions definitions */ #define PARTS_CSA "csa-mmc" #define PARTS_BOOT "boot" diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 8d4b782..a980e6c 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -29,8 +29,6 @@ #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - /* Tizen - partitions definitions */ #define PARTS_CSA "csa-mmc" #define PARTS_BOOT "boot" diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h index 3cfad7c..dc2fdcc 100644 --- a/include/configs/turris_mox.h +++ b/include/configs/turris_mox.h @@ -21,9 +21,6 @@ 4000000, 4500000, 5000000, 5500000, \ 6000000 } -#define CONFIG_ARP_TIMEOUT 200 -#define CONFIG_NET_RETRY_COUNT 50 - #define CONFIG_USB_MAX_CONTROLLER_COUNT 6 #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index ca79b03..c991bff 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -11,15 +11,11 @@ #include "rcar-gen3-common.h" -/* Ethernet RAVB */ -#define CONFIG_BITBANGMII_MULTI - /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index c9d3c2d..f813f88c 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -39,7 +39,6 @@ #define BOOTENV #endif -#define CONFIG_SYS_MONITOR_BASE 0 #define CONFIG_SYS_MONITOR_LEN 0x00200000 /* 2MB */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -79,7 +78,6 @@ #define CONFIG_ROOTPATH "/nfs/root/path" #ifdef CONFIG_FIT -#define CONFIG_BOOTFILE "fitImage" #define KERNEL_ADDR_R_OFFSET "0x05100000" #define LINUXBOOT_ENV_SETTINGS \ "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ @@ -87,11 +85,9 @@ "__nfsboot=run tftpboot\0" #else #ifdef CONFIG_ARM64 -#define CONFIG_BOOTFILE "Image" #define LINUXBOOT_CMD "booti" #define KERNEL_ADDR_R_OFFSET "0x02080000" #else -#define CONFIG_BOOTFILE "zImage" #define LINUXBOOT_CMD "bootz" #define KERNEL_ADDR_R_OFFSET "0x00208000" #endif diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index ffa6900..2b6078a 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -23,10 +23,6 @@ /* * Hardware drivers */ -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 @@ -47,11 +43,6 @@ #define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) #endif -/* Ethernet */ -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91_WANTS_COMMON_PHY - /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL diff --git a/include/configs/vcoreiii.h b/include/configs/vcoreiii.h index 3b86309..88c3061 100644 --- a/include/configs/vcoreiii.h +++ b/include/configs/vcoreiii.h @@ -32,8 +32,6 @@ #error Unknown DDR size - please add! #endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - #if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT) #define VCOREIII_DEFAULT_MTD_ENV \ "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 17583c0..9fe6231 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -42,7 +42,6 @@ func(MMC, mmc, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif @@ -103,8 +102,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* ENET */ -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 7 #define FEC_QUIRK_ENET_MAC #define IMX_FEC_BASE 0x30BE0000 diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index f8b4bf2..9e29dc1 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -16,7 +16,6 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x960000 #define CONFIG_SPL_BSS_START_ADDR 0x0098fc00 #define CONFIG_SPL_BSS_MAX_SIZE SZ_1K @@ -31,17 +30,11 @@ #define CONFIG_POWER_PCA9450 #define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SPEED 100000 #endif /* CONFIG_SPL_BUILD */ -#define CONFIG_REMAKE_ELF - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_ETHPRIME "eth0" /* eqos is aliased on-module Ethernet interface */ - -#define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_FEC_MXC_PHYADDR 7 #define FEC_QUIRK_ENET_MAC @@ -61,7 +54,6 @@ func(MMC, mmc, 2) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_ISO_PARTITION #else #define BOOTENV #endif diff --git a/include/configs/vexpress_aemv8.h b/include/configs/vexpress_aemv8.h index f0c5ceb..4f0ff23 100644 --- a/include/configs/vexpress_aemv8.h +++ b/include/configs/vexpress_aemv8.h @@ -20,8 +20,13 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* CS register bases for the original memory map. */ -#define V2M_BASE 0x80000000 +#ifdef CONFIG_TARGET_VEXPRESS64_BASER_FVP +#define V2M_DRAM_BASE 0x00000000 +#define V2M_PA_BASE 0x80000000 +#else +#define V2M_DRAM_BASE 0x80000000 #define V2M_PA_BASE 0x00000000 +#endif #define V2M_PA_CS0 (V2M_PA_BASE + 0x00000000) #define V2M_PA_CS1 (V2M_PA_BASE + 0x14000000) @@ -99,13 +104,8 @@ #define CONFIG_PL011_CLOCK 24000000 #endif -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* Miscellaneous configurable options */ - /* Physical Memory Map */ -#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 (V2M_DRAM_BASE) /* SDRAM Bank #1 */ /* Top 16MB reserved for secure world use */ #define DRAM_SEC_SIZE 0x01000000 #define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE @@ -119,11 +119,7 @@ #define PHYS_SDRAM_2_SIZE 0x80000000 #endif -/* Enable memtest */ - -/* Initial environment variables */ -#ifdef CONFIG_TARGET_VEXPRESS64_JUNO -/* Copy the kernel and FDT to DRAM memory and boot */ +/* Copy the kernel, initrd and FDT from NOR flash to DRAM memory and boot. */ #define BOOTENV_DEV_AFS(devtypeu, devtypel, instance) \ "bootcmd_afs=" \ "afs load ${kernel_name} ${kernel_addr_r} ;"\ @@ -146,6 +142,54 @@ "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0" #define BOOTENV_DEV_NAME_AFS(devtypeu, devtypel, instance) "afs " +/* Boot by executing a U-Boot script pre-loaded into DRAM. */ +#define BOOTENV_DEV_MEM(devtypeu, devtypel, instance) \ + "bootcmd_mem= " \ + "source ${scriptaddr}; " \ + "if test $? -eq 1; then " \ + " env import -t ${scriptaddr}; " \ + " if test -n $uenvcmd; then " \ + " echo Running uenvcmd ...; " \ + " run uenvcmd; " \ + " fi; " \ + "fi\0" +#define BOOTENV_DEV_NAME_MEM(devtypeu, devtypel, instance) "mem " + +#ifdef CONFIG_CMD_VIRTIO +#define FUNC_VIRTIO(func) func(VIRTIO, virtio, 0) +#else +#define FUNC_VIRTIO(func) +#endif + +/* + * Boot by loading an Android image, or kernel, initrd and FDT through + * semihosting into DRAM. + */ +#define BOOTENV_DEV_SMH(devtypeu, devtypel, instance) \ + "bootcmd_smh= " \ + "if load hostfs - ${boot_addr_r} ${boot_name}; then" \ + " setenv bootargs;" \ + " abootimg addr ${boot_addr_r};" \ + " abootimg get dtb --index=0 fdt_addr_r;" \ + " bootm ${boot_addr_r} ${boot_addr_r} ${fdt_addr_r};" \ + "else" \ + " if load hostfs - ${kernel_addr_r} ${kernel_name}; then" \ + " setenv fdt_high 0xffffffffffffffff;" \ + " setenv initrd_high 0xffffffffffffffff;" \ + " load hostfs - ${fdt_addr_r} ${fdtfile};" \ + " load hostfs - ${ramdisk_addr_r} ${ramdisk_name};" \ + " fdt addr ${fdt_addr_r};" \ + " fdt resize;" \ + " fdt chosen ${ramdisk_addr_r} ${filesize};" \ + " booti $kernel_addr_r - $fdt_addr_r;" \ + " fi;" \ + "fi\0" +#define BOOTENV_DEV_NAME_SMH(devtypeu, devtypel, instance) "smh " + +/* Boot sources for distro boot and load addresses, per board */ + +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO /* Arm Juno board */ + #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(SATA, sata, 0) \ @@ -154,42 +198,74 @@ func(DHCP, dhcp, na) \ func(AFS, afs, na) -#include <config_distro_bootcmd.h> +#define VEXPRESS_KERNEL_ADDR 0x80080000 +#define VEXPRESS_PXEFILE_ADDR 0x8fb00000 +#define VEXPRESS_FDT_ADDR 0x8fc00000 +#define VEXPRESS_SCRIPT_ADDR 0x8fd00000 +#define VEXPRESS_RAMDISK_ADDR 0x8fe00000 -/* - * Defines where the kernel and FDT exist in NOR flash and where it will - * be copied into DRAM - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_name=norkern\0" \ - "kernel_alt_name=Image\0" \ - "kernel_addr_r=0x80080000\0" \ - "ramdisk_name=ramdisk.img\0" \ - "ramdisk_addr_r=0x88000000\0" \ - "fdtfile=board.dtb\0" \ - "fdt_alt_name=juno\0" \ - "fdt_addr_r=0x80000000\0" \ - BOOTENV - -#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP - -#define VEXPRESS_KERNEL_ADDR 0x80080000 -#define VEXPRESS_FDT_ADDR 0x8fc00000 -#define VEXPRESS_BOOT_ADDR 0x8fd00000 -#define VEXPRESS_RAMDISK_ADDR 0x8fe00000 +#define EXTRA_ENV_NAMES \ + "kernel_name=norkern\0" \ + "kernel_alt_name=Image\0" \ + "ramdisk_name=ramdisk.img\0" \ + "fdtfile=board.dtb\0" \ + "fdt_alt_name=juno\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_name=Image\0" \ - "kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \ - "ramdisk_name=ramdisk.img\0" \ - "ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \ - "fdtfile=devtree.dtb\0" \ - "fdt_addr_r=" __stringify(VEXPRESS_FDT_ADDR) "\0" \ - "boot_name=boot.img\0" \ - "boot_addr_r=" __stringify(VEXPRESS_BOOT_ADDR) "\0" +#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP /* ARMv8-A base model */ + +#define BOOT_TARGET_DEVICES(func) \ + func(SMH, smh, na) \ + func(MEM, mem, na) \ + FUNC_VIRTIO(func) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#define VEXPRESS_KERNEL_ADDR 0x80080000 +#define VEXPRESS_PXEFILE_ADDR 0x8fa00000 +#define VEXPRESS_SCRIPT_ADDR 0x8fb00000 +#define VEXPRESS_FDT_ADDR 0x8fc00000 +#define VEXPRESS_BOOT_ADDR 0x8fd00000 +#define VEXPRESS_RAMDISK_ADDR 0x8fe00000 + +#define EXTRA_ENV_NAMES \ + "kernel_name=Image\0" \ + "ramdisk_name=ramdisk.img\0" \ + "fdtfile=devtree.dtb\0" \ + "boot_name=boot.img\0" \ + "boot_addr_r=" __stringify(VEXPRESS_BOOT_ADDR) "\0" +#elif CONFIG_TARGET_VEXPRESS64_BASER_FVP /* ARMv8-R base model */ + +#define BOOT_TARGET_DEVICES(func) \ + func(MEM, mem, na) \ + FUNC_VIRTIO(func) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#define VEXPRESS_KERNEL_ADDR 0x00200000 +#define VEXPRESS_PXEFILE_ADDR 0x0fb00000 +#define VEXPRESS_FDT_ADDR 0x0fc00000 +#define VEXPRESS_SCRIPT_ADDR 0x0fd00000 +#define VEXPRESS_RAMDISK_ADDR 0x0fe00000 + +#define EXTRA_ENV_NAMES \ + "kernel_name=Image\0" \ + "ramdisk_name=ramdisk.img\0" \ + "fdtfile=board.dtb\0" #endif +#include <config_distro_bootcmd.h> + +/* Default load addresses and names for the different payloads. */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \ + "ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \ + "pxefile_addr_r=" __stringify(VEXPRESS_PXEFILE_ADDR) "\0" \ + "fdt_addr_r=" __stringify(VEXPRESS_FDT_ADDR) "\0" \ + "scriptaddr=" __stringify(VEXPRESS_SCRIPT_ADDR) "\0" \ + EXTRA_ENV_NAMES \ + BOOTENV + /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 64 /* max command args */ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 5f119ae..599caac 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -126,9 +126,6 @@ #define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* Miscellaneous configurable options */ #define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) @@ -178,7 +175,6 @@ #define CONFIG_SYS_FLASH_SIZE 0x04000000 #define CONFIG_SYS_FLASH_BASE0 V2M_NOR0 #define CONFIG_SYS_FLASH_BASE1 V2M_NOR1 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 /* Timeout values in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index d90c2fa..ebae822 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -24,7 +24,6 @@ #define CONFIG_SYS_FSL_ESDHC_NUM 1 #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_FEC_MXC_PHYADDR 0 /* I2C Configs */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 7bd4882..74eccfa 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -30,12 +30,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) -/* SerialFlash */ - -#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI0 -#endif - /* MMC */ #ifdef CONFIG_CMD_MMC @@ -49,8 +43,6 @@ /* USB device */ /* Ethernet Hardware */ -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY #ifdef CONFIG_SPI_BOOT diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index dcdaffc..e101739 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -47,9 +47,6 @@ #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC" - #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index c60da8a..7e3d589 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -38,9 +38,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) #define CONFIG_SYS_CBSIZE 512 -/* U-Boot */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - /* Environment settings */ #endif //__VOCORE2_CONFIG_H__ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 80e8fe1..d44b4a0 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -31,7 +31,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* Framebuffer */ -#define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index a43fd81..3324537 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -22,14 +22,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_512K \ - GENERATED_GBL_DATA_SIZE) -/* - * Ethernet Driver - */ - -#define CONFIG_LPC32XX_ETH -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -/* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */ - #define CONFIG_RTC_DS1374 /* @@ -68,12 +60,6 @@ */ /* - * Boot Linux - */ - -#define CONFIG_BOOTFILE "uImage" - -/* * SPL */ diff --git a/include/configs/x86-chromebook.h b/include/configs/x86-chromebook.h index 0efc715..b45d2bb 100644 --- a/include/configs/x86-chromebook.h +++ b/include/configs/x86-chromebook.h @@ -24,7 +24,6 @@ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0xefff -#define CONFIG_BIOSEMU #define VIDEO_IO_OFFSET 0 #define CONFIG_X86EMU_RAW_IO diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 394978b..a22f970 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -47,7 +47,6 @@ */ #define CONFIG_SYS_STACK_SIZE (32 * 1024) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /*----------------------------------------------------------------------- * Environment configuration @@ -62,12 +61,9 @@ * USB configuration */ -#define CONFIG_BOOTP_BOOTFILESIZE - /* Default environment */ #define CONFIG_ROOTPATH "/opt/nfsroot" #define CONFIG_HOSTNAME "x86" -#define CONFIG_BOOTFILE "bzImage" #define CONFIG_RAMDISK_ADDR 0x4000000 #if defined(CONFIG_GENERATE_ACPI_TABLE) || defined(CONFIG_EFI_STUB) #define CONFIG_OTHBOOTARGS "othbootargs=\0" diff --git a/include/configs/xea.h b/include/configs/xea.h index acaf81d..01942ea 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -31,11 +31,6 @@ #define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -/* Environment */ - -/* Booting Linux */ -#define CONFIG_BOOTFILE "uImage" - /* Extra Environment */ #define CONFIG_HOSTNAME "xea" diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index bc72f5f..60df795 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -10,8 +10,6 @@ #ifndef __XILINX_VERSAL_H #define __XILINX_VERSAL_H -/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ - /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0xF9000000 #define GICR_BASE 0xF9080000 @@ -27,10 +25,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_MAY_FAIL - /* Miscellaneous configurable options */ /* Monitor Command Prompt */ @@ -46,14 +40,11 @@ /* Ethernet driver */ #if defined(CONFIG_ZYNQ_GEM) -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define PHY_ANEG_TIMEOUT 20000 #endif #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) -#define CONFIG_CLOCKS - #define ENV_MEM_LAYOUT_SETTINGS \ "fdt_addr_r=0x40000000\0" \ "fdt_size_r=0x400000\0" \ diff --git a/include/configs/xilinx_versal_mini.h b/include/configs/xilinx_versal_mini.h index 00c9718..a94ab1f 100644 --- a/include/configs/xilinx_versal_mini.h +++ b/include/configs/xilinx_versal_mini.h @@ -17,10 +17,6 @@ /* Undef unneeded configs */ #undef CONFIG_EXTRA_ENV_SETTINGS -/* BOOTP options */ -#undef CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_BOOTP_MAY_FAIL - #undef CONFIG_SYS_CBSIZE #define CONFIG_SYS_CBSIZE 1024 diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index e51d92f..a063c01 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -10,8 +10,6 @@ #ifndef __XILINX_ZYNQMP_H #define __XILINX_ZYNQMP_H -/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ - /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0xF9010000 #define GICC_BASE 0xF9020000 @@ -27,10 +25,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_MAY_FAIL - #ifdef CONFIG_NAND_ARASAN # define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif @@ -61,14 +55,11 @@ /* Ethernet driver */ #if defined(CONFIG_ZYNQ_GEM) -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define PHY_ANEG_TIMEOUT 20000 #endif #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) -#define CONFIG_CLOCKS - #define ENV_MEM_LAYOUT_SETTINGS \ "fdt_addr_r=0x40000000\0" \ "fdt_size_r=0x400000\0" \ diff --git a/include/configs/xilinx_zynqmp_mini.h b/include/configs/xilinx_zynqmp_mini.h index c3c8b4c..baef561 100644 --- a/include/configs/xilinx_zynqmp_mini.h +++ b/include/configs/xilinx_zynqmp_mini.h @@ -18,9 +18,6 @@ #undef CONFIG_EXTRA_ENV_SETTINGS #undef CONFIG_SYS_INIT_SP_ADDR -/* BOOTP options */ -#undef CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_BOOTP_MAY_FAIL #undef CONFIG_SYS_CBSIZE #define CONFIG_SYS_CBSIZE 1024 diff --git a/include/configs/xpress.h b/include/configs/xpress.h index 6d621f2..13cfa2c 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -45,8 +45,6 @@ #define CONFIG_FEC_ENET_DEV 0 #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC" #define CONFIG_UBOOT_SECTOR_START 0x2 #define CONFIG_UBOOT_SECTOR_COUNT 0x3fe diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 8c2cdb5..92e5b43 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -97,9 +97,6 @@ /* U-Boot general configuration */ /*==============================*/ -#define CONFIG_BOARD_POSTCLK_INIT - -#define CONFIG_BOOTFILE "uImage" /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 1024 /* Boot Argument Buffer Size */ @@ -186,19 +183,16 @@ # define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* block size 64KB */ # define CONFIG_SYS_FLASH_PARMSECT_SZ 0x2000 /* param size 8KB */ # define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000) -# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #elif defined(CONFIG_XTFPGA_KC705) # define CONFIG_SYS_FLASH_SIZE 0x8000000 /* 128MB */ # define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */ # define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */ # define CONFIG_SYS_FLASH_BASE IOADDR(0x00000000) -# define CONFIG_SYS_MONITOR_BASE IOADDR(0x06000000) #else # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* 16MB */ # define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */ # define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */ # define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000) -# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #endif #define CONFIG_SYS_MAX_FLASH_SECT \ (CONFIG_SYS_FLASH_SECT_SZ/CONFIG_SYS_FLASH_PARMSECT_SZ + \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 780952c..c92f796 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -26,10 +26,6 @@ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} /* Ethernet driver */ -#if defined(CONFIG_ZYNQ_GEM) -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_BOOTP_MAY_FAIL -#endif /* NOR */ #ifdef CONFIG_MTD_NOR_FLASH @@ -194,7 +190,6 @@ /* Miscellaneous configurable options */ -#define CONFIG_CLOCKS #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h index 02002ac..c420726 100644 --- a/include/dm/device-internal.h +++ b/include/dm/device-internal.h @@ -10,6 +10,7 @@ #ifndef _DM_DEVICE_INTERNAL_H #define _DM_DEVICE_INTERNAL_H +#include <event.h> #include <linker_lists.h> #include <dm/ofnode.h> @@ -426,4 +427,13 @@ static inline void devres_release_all(struct udevice *dev) } #endif /* ! CONFIG_DEVRES */ + +static inline int device_notify(const struct udevice *dev, enum event_t type) +{ +#if CONFIG_IS_ENABLED(DM_EVENT) + return event_notify(type, &dev, sizeof(dev)); +#else + return 0; +#endif +} #endif diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h index 0cb324c..744dffe 100644 --- a/include/dm/ofnode.h +++ b/include/dm/ofnode.h @@ -895,6 +895,19 @@ int ofnode_read_pci_addr(ofnode node, enum fdt_pci_space type, int ofnode_read_pci_vendev(ofnode node, u16 *vendor, u16 *device); /** + * ofnode_read_eth_phy_id() - look up eth phy vendor and device id + * + * Look at the compatible property of a device node that represents a eth phy + * device and extract phy vendor id and device id from it. + * + * @param node node to examine + * @param vendor vendor id of the eth phy device + * @param device device id of the eth phy device + * @return 0 if ok, negative on error + */ +int ofnode_read_eth_phy_id(ofnode node, u16 *vendor, u16 *device); + +/** * ofnode_read_addr_cells() - Get the number of address cells for a node * * This walks back up the tree to find the closest #address-cells property diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h index 8b869c4..a09b242 100644 --- a/include/dm/pinctrl.h +++ b/include/dm/pinctrl.h @@ -7,7 +7,7 @@ #define __PINCTRL_H #define PINNAME_SIZE 10 -#define PINMUX_SIZE 40 +#define PINMUX_SIZE 80 /** * struct pinconf_param - pin config parameters @@ -453,30 +453,30 @@ struct pinctrl_ops { * presented using the packed format. */ enum pin_config_param { - PIN_CONFIG_BIAS_BUS_HOLD, - PIN_CONFIG_BIAS_DISABLE, - PIN_CONFIG_BIAS_HIGH_IMPEDANCE, - PIN_CONFIG_BIAS_PULL_DOWN, - PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, - PIN_CONFIG_BIAS_PULL_UP, - PIN_CONFIG_DRIVE_OPEN_DRAIN, - PIN_CONFIG_DRIVE_OPEN_SOURCE, - PIN_CONFIG_DRIVE_PUSH_PULL, - PIN_CONFIG_DRIVE_STRENGTH, - PIN_CONFIG_DRIVE_STRENGTH_UA, - PIN_CONFIG_INPUT_DEBOUNCE, - PIN_CONFIG_INPUT_ENABLE, - PIN_CONFIG_INPUT_SCHMITT, - PIN_CONFIG_INPUT_SCHMITT_ENABLE, - PIN_CONFIG_LOW_POWER_MODE, - PIN_CONFIG_OUTPUT_ENABLE, - PIN_CONFIG_OUTPUT, - PIN_CONFIG_POWER_SOURCE, - PIN_CONFIG_SLEEP_HARDWARE_STATE, - PIN_CONFIG_SLEW_RATE, - PIN_CONFIG_SKEW_DELAY, - PIN_CONFIG_END = 0x7F, - PIN_CONFIG_MAX = 0xFF, + PIN_CONFIG_BIAS_BUS_HOLD = 0, + PIN_CONFIG_BIAS_DISABLE = 1, + PIN_CONFIG_BIAS_HIGH_IMPEDANCE = 2, + PIN_CONFIG_BIAS_PULL_DOWN = 3, + PIN_CONFIG_BIAS_PULL_PIN_DEFAULT = 4, + PIN_CONFIG_BIAS_PULL_UP = 5, + PIN_CONFIG_DRIVE_OPEN_DRAIN = 6, + PIN_CONFIG_DRIVE_OPEN_SOURCE = 7, + PIN_CONFIG_DRIVE_PUSH_PULL = 8, + PIN_CONFIG_DRIVE_STRENGTH = 9, + PIN_CONFIG_DRIVE_STRENGTH_UA = 10, + PIN_CONFIG_INPUT_DEBOUNCE = 11, + PIN_CONFIG_INPUT_ENABLE = 12, + PIN_CONFIG_INPUT_SCHMITT = 13, + PIN_CONFIG_INPUT_SCHMITT_ENABLE = 14, + PIN_CONFIG_LOW_POWER_MODE = 15, + PIN_CONFIG_OUTPUT_ENABLE = 16, + PIN_CONFIG_OUTPUT = 17, + PIN_CONFIG_POWER_SOURCE = 18, + PIN_CONFIG_SLEEP_HARDWARE_STATE = 19, + PIN_CONFIG_SLEW_RATE = 20, + PIN_CONFIG_SKEW_DELAY = 21, + PIN_CONFIG_END = 127, /* 0x7F */ + PIN_CONFIG_MAX = 255, /* 0xFF */ }; #if CONFIG_IS_ENABLED(PINCTRL_GENERIC) diff --git a/include/env_default.h b/include/env_default.h index 21afd7f..7004a6f 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -77,7 +77,7 @@ const char default_environment[] = { #ifdef CONFIG_HOSTNAME "hostname=" CONFIG_HOSTNAME "\0" #endif -#ifdef CONFIG_BOOTFILE +#ifdef CONFIG_USE_BOOTFILE "bootfile=" CONFIG_BOOTFILE "\0" #endif #ifdef CONFIG_SYS_LOAD_ADDR diff --git a/include/erofs.h b/include/erofs.h new file mode 100644 index 0000000..1fbe82b --- /dev/null +++ b/include/erofs.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _EROFS_H_ +#define _EROFS_H_ + +struct disk_partition; + +int erofs_opendir(const char *filename, struct fs_dir_stream **dirsp); +int erofs_readdir(struct fs_dir_stream *dirs, struct fs_dirent **dentp); +int erofs_probe(struct blk_desc *fs_dev_desc, + struct disk_partition *fs_partition); +int erofs_read(const char *filename, void *buf, loff_t offset, + loff_t len, loff_t *actread); +int erofs_size(const char *filename, loff_t *size); +int erofs_exists(const char *filename); +void erofs_close(void); +void erofs_closedir(struct fs_dir_stream *dirs); +int erofs_uuid(char *uuid_str); + +#endif /* _EROFS_H */ diff --git a/include/event.h b/include/event.h new file mode 100644 index 0000000..62e72a7 --- /dev/null +++ b/include/event.h @@ -0,0 +1,210 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Events provide a general-purpose way to react to / subscribe to changes + * within U-Boot + * + * Copyright 2021 Google LLC + * Written by Simon Glass <sjg@chromium.org> + */ + +#ifndef __event_h +#define __event_h + +/** + * enum event_t - Types of events supported by U-Boot + * + * @EVT_DM_PRE_PROBE: Device is about to be probed + */ +enum event_t { + EVT_NONE, + EVT_TEST, + + /* Events related to driver model */ + EVT_DM_POST_INIT, + EVT_DM_PRE_PROBE, + EVT_DM_POST_PROBE, + EVT_DM_PRE_REMOVE, + EVT_DM_POST_REMOVE, + + /* Init hooks */ + EVT_MISC_INIT_F, + + EVT_COUNT +}; + +union event_data { + /** + * struct event_data_test - test data + * + * @signal: A value to update the state with + */ + struct event_data_test { + int signal; + } test; + + /** + * struct event_dm - driver model event + * + * @dev: Device this event relates to + */ + struct event_dm { + struct udevice *dev; + } dm; +}; + +/** + * struct event - an event that can be sent and received + * + * @type: Event type + * @data: Data for this particular event + */ +struct event { + enum event_t type; + union event_data data; +}; + +/** Function type for event handlers */ +typedef int (*event_handler_t)(void *ctx, struct event *event); + +/** + * struct evspy_info - information about an event spy + * + * @func: Function to call when the event is activated (must be first) + * @type: Event type + * @id: Event id string + */ +struct evspy_info { + event_handler_t func; + enum event_t type; +#if CONFIG_IS_ENABLED(EVENT_DEBUG) + const char *id; +#endif +}; + +/* Declare a new event spy */ +#if CONFIG_IS_ENABLED(EVENT_DEBUG) +#define _ESPY_REC(_type, _func) { _func, _type, #_func, } +#else +#define _ESPY_REC(_type, _func) { _func, _type, } +#endif + +static inline const char *event_spy_id(struct evspy_info *spy) +{ +#if CONFIG_IS_ENABLED(EVENT_DEBUG) + return spy->id; +#else + return "?"; +#endif +} + +/* + * It seems that LTO will drop list entries if it decides they are not used, + * although the conditions that cause this are unclear. + * + * The example found is the following: + * + * static int sandbox_misc_init_f(void *ctx, struct event *event) + * { + * return sandbox_early_getopt_check(); + * } + * EVENT_SPY(EVT_MISC_INIT_F, sandbox_misc_init_f); + * + * where EVENT_SPY uses ll_entry_declare() + * + * In this case, LTO decides to drop the sandbox_misc_init_f() function + * (which is fine) but then drops the linker-list entry too. This means + * that the code no longer works, in this case sandbox no-longer checks its + * command-line arguments properly. + * + * Without LTO, the KEEP() command in the .lds file is enough to keep the + * entry around. But with LTO it seems that the entry has already been + * dropped before the link script is considered. + * + * The only solution I can think of is to mark linker-list entries as 'used' + * using an attribute. This should be safe, since we don't actually want to drop + * any of these. However this does slightly limit LTO's optimisation choices. + */ +#define EVENT_SPY(_type, _func) \ + static __attribute__((used)) ll_entry_declare(struct evspy_info, \ + _type, evspy_info) = \ + _ESPY_REC(_type, _func) + +/** + * event_register - register a new spy + * + * @id: Spy ID + * @type: Event type to subscribe to + * @func: Function to call when the event is sent + * @ctx: Context to pass to the function + * @return 0 if OK, -ve on error + */ +int event_register(const char *id, enum event_t type, event_handler_t func, + void *ctx); + +/** event_show_spy_list( - Show a list of event spies */ +void event_show_spy_list(void); + +#if CONFIG_IS_ENABLED(EVENT) +/** + * event_notify() - notify spies about an event + * + * It is possible to pass in union event_data here but that may not be + * convenient if the data is elsewhere, or is one of the members of the union. + * So this uses a void * for @data, with a separate @size. + * + * @type: Event type + * @data: Event data to be sent (e.g. union_event_data) + * @size: Size of data in bytes + * @return 0 if OK, -ve on error + */ +int event_notify(enum event_t type, void *data, int size); + +/** + * event_notify_null() - notify spies about an event + * + * Data is NULL and the size is 0 + * + * @type: Event type + * @return 0 if OK, -ve on error + */ +int event_notify_null(enum event_t type); +#else +static inline int event_notify(enum event_t type, void *data, int size) +{ + return 0; +} + +static inline int event_notify_null(enum event_t type) +{ + return 0; +} +#endif + +#if CONFIG_IS_ENABLED(EVENT_DYNAMIC) +/** + * event_uninit() - Clean up dynamic events + * + * This removes all dynamic event handlers + */ +int event_uninit(void); + +/** + * event_uninit() - Set up dynamic events + * + * Init a list of dynamic event handlers, so that these can be added as + * needed + */ +int event_init(void); +#else +static inline int event_uninit(void) +{ + return 0; +} + +static inline int event_init(void) +{ + return 0; +} +#endif + +#endif diff --git a/include/event_internal.h b/include/event_internal.h new file mode 100644 index 0000000..8432c6f --- /dev/null +++ b/include/event_internal.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Internal definitions for events + * + * Copyright 2021 Google LLC + * Written by Simon Glass <sjg@chromium.org> + */ + +#ifndef __event_internal_h +#define __event_internal_h + +#include <event.h> +#include <linux/list.h> + +/** + * struct event_spy - a spy that watches for an event of a particular type + * + * @id: Spy ID + * @type: Event type to subscribe to + * @func: Function to call when the event is sent + * @ctx: Context to pass to the function + */ +struct event_spy { + struct list_head sibling_node; + const char *id; + enum event_t type; + event_handler_t func; + void *ctx; +}; + +struct event_state { + struct list_head spy_head; +}; + +#endif diff --git a/include/fs.h b/include/fs.h index c8df388..e2beba3 100644 --- a/include/fs.h +++ b/include/fs.h @@ -17,6 +17,8 @@ struct cmd_tbl; #define FS_TYPE_UBIFS 4 #define FS_TYPE_BTRFS 5 #define FS_TYPE_SQUASHFS 6 +#define FS_TYPE_EROFS 7 +#define FS_TYPE_SEMIHOSTING 8 struct blk_desc; diff --git a/include/fsl_dcu_fb.h b/include/fsl_dcu_fb.h deleted file mode 100644 index 7a5347a..0000000 --- a/include/fsl_dcu_fb.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * - * FSL DCU Framebuffer driver - */ -#include <linux/fb.h> - -int fsl_dcu_init(struct fb_info *fbinfo, - unsigned int xres, - unsigned int yres, - unsigned int pixel_format); - -int fsl_dcu_fixedfb_setup(void *blob); - -/* Prototypes for external board-specific functions */ -int platform_dcu_init(struct fb_info *fbinfo, - unsigned int xres, - unsigned int yres, - const char *port, - struct fb_videomode *dcu_fb_videomode); -unsigned int dcu_set_pixel_clock(unsigned int pixclock); diff --git a/include/fsl_diu_fb.h b/include/fsl_diu_fb.h deleted file mode 100644 index 139851b..0000000 --- a/include/fsl_diu_fb.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2007, 2011 Freescale Semiconductor, Inc. - * Authors: York Sun <yorksun@freescale.com> - * Timur Tabi <timur@freescale.com> - * - * FSL DIU Framebuffer driver - */ - -int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix); - -/* Prototypes for external board-specific functions */ -int platform_diu_init(unsigned int xres, unsigned int yres, const char *port); -void diu_set_pixel_clock(unsigned int pixclock); diff --git a/include/image.h b/include/image.h index 97e5f2e..498eb7f 100644 --- a/include/image.h +++ b/include/image.h @@ -48,6 +48,7 @@ struct fdt_region; extern ulong image_load_addr; /* Default Load Address */ extern ulong image_save_addr; /* Default Save Address */ extern ulong image_save_size; /* Default Save Size */ +extern ulong image_load_offset; /* Default Load Address Offset */ /* An invalid size, meaning that the image size is not known */ #define IMAGE_SIZE_INVAL (-1UL) @@ -350,6 +351,7 @@ typedef struct bootm_headers { #define BOOTM_STATE_OS_PREP (0x00000100) #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */ #define BOOTM_STATE_OS_GO (0x00000400) +#define BOOTM_STATE_PRE_LOAD 0x00000800 int state; #if defined(CONFIG_LMB) && !defined(USE_HOSTCC) @@ -1017,6 +1019,21 @@ int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, int fit_set_timestamp(void *fit, int noffset, time_t timestamp); +/** + * fit_pre_load_data() - add public key to fdt blob + * + * Adds public key to the node pre load. + * + * @keydir: Directory containing keys + * @keydest: FDT blob to write public key + * @fit: Pointer to the FIT format image header + * + * returns: + * 0, on success + * < 0, on failure + */ +int fit_pre_load_data(const char *keydir, void *keydest, void *fit); + int fit_cipher_data(const char *keydir, void *keydest, void *fit, const char *comment, int require_keys, const char *engine_id, const char *cmdname); @@ -1324,6 +1341,19 @@ struct crypto_algo *image_get_crypto_algo(const char *full_name); struct padding_algo *image_get_padding_algo(const char *name); /** + * image_pre_load() - Manage pre load header + * + * Manage the pre-load header before launching the image. + * It checks the signature of the image. It also set the + * variable image_load_offset to skip this header before + * launching the image. + * + * @param addr Address of the image + * @return: 0 on success, -ve on error + */ +int image_pre_load(ulong addr); + +/** * fit_image_verify_required_sigs() - Verify signatures marked as 'required' * * @fit: FIT to check diff --git a/include/init.h b/include/init.h index 20c3976..7449650 100644 --- a/include/init.h +++ b/include/init.h @@ -46,17 +46,6 @@ void board_init_f(ulong dummy); int arch_cpu_init(void); /** - * arch_cpu_init_dm() - init CPU after driver model is available - * - * This is called immediately after driver model is available before - * relocation. This is similar to arch_cpu_init() but is able to reference - * devices - * - * Return: 0 if OK, -ve on error - */ -int arch_cpu_init_dm(void); - -/** * mach_cpu_init() - SoC/machine dependent CPU setup * * This is called after arch_cpu_init(). It should handle any @@ -217,7 +206,6 @@ int init_cache_f_r(void); int print_cpuinfo(void); #endif int timer_init(void); -int misc_init_f(void); #if defined(CONFIG_DTB_RESELECT) int embedded_dtb_select(void); diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 9a61166..2d04882 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -254,4 +254,12 @@ const char *clk_hw_get_name(const struct clk *hw); ulong clk_generic_get_rate(struct clk *clk); struct clk *dev_get_clk_ptr(struct udevice *dev); + +ulong ccf_clk_get_rate(struct clk *clk); +ulong ccf_clk_set_rate(struct clk *clk, unsigned long rate); +int ccf_clk_set_parent(struct clk *clk, struct clk *parent); +int ccf_clk_enable(struct clk *clk); +int ccf_clk_disable(struct clk *clk); +extern const struct clk_ops ccf_clk_ops; + #endif /* __LINUX_CLK_PROVIDER_H */ diff --git a/include/linux/math64.h b/include/linux/math64.h index 08584c8..eaa9fd5 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -48,6 +48,9 @@ static inline u64 div64_u64(u64 dividend, u64 divisor) return dividend / divisor; } +#define DIV64_U64_ROUND_UP(ll, d) \ + ({ u64 _tmp = (d); div64_u64((ll) + _tmp - 1, _tmp); }) + /** * div64_s64 - signed 64bit divide with 64bit divisor */ diff --git a/include/log.h b/include/log.h index ce48d51..8f35c10 100644 --- a/include/log.h +++ b/include/log.h @@ -98,6 +98,8 @@ enum log_category_t { LOGC_ACPI, /** @LOGC_BOOT: Related to boot process / boot image processing */ LOGC_BOOT, + /** @LOGC_EVENT: Related to event and event handling */ + LOGC_EVENT, /** @LOGC_COUNT: Number of log categories */ LOGC_COUNT, /** @LOGC_END: Sentinel value for lists of log categories */ diff --git a/include/net.h b/include/net.h index b02e4f6..675bf41 100644 --- a/include/net.h +++ b/include/net.h @@ -35,13 +35,7 @@ struct udevice; * alignment in memory. * */ - -#ifdef CONFIG_SYS_RX_ETH_BUFFER -# define PKTBUFSRX CONFIG_SYS_RX_ETH_BUFFER -#else -# define PKTBUFSRX 4 -#endif - +#define PKTBUFSRX CONFIG_SYS_RX_ETH_BUFFER #define PKTALIGN ARCH_DMA_MINALIGN /* Number of packets processed together */ diff --git a/include/pci.h b/include/pci.h index 673c95c..5dbdcb0 100644 --- a/include/pci.h +++ b/include/pci.h @@ -55,130 +55,7 @@ #define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ #define PCI_CLASS_DEVICE 0x0a /* Device class */ #define PCI_CLASS_CODE 0x0b /* Device class code */ -#define PCI_CLASS_CODE_TOO_OLD 0x00 -#define PCI_CLASS_CODE_STORAGE 0x01 -#define PCI_CLASS_CODE_NETWORK 0x02 -#define PCI_CLASS_CODE_DISPLAY 0x03 -#define PCI_CLASS_CODE_MULTIMEDIA 0x04 -#define PCI_CLASS_CODE_MEMORY 0x05 -#define PCI_CLASS_CODE_BRIDGE 0x06 -#define PCI_CLASS_CODE_COMM 0x07 -#define PCI_CLASS_CODE_PERIPHERAL 0x08 -#define PCI_CLASS_CODE_INPUT 0x09 -#define PCI_CLASS_CODE_DOCKING 0x0A -#define PCI_CLASS_CODE_PROCESSOR 0x0B -#define PCI_CLASS_CODE_SERIAL 0x0C -#define PCI_CLASS_CODE_WIRELESS 0x0D -#define PCI_CLASS_CODE_I2O 0x0E -#define PCI_CLASS_CODE_SATELLITE 0x0F -#define PCI_CLASS_CODE_CRYPTO 0x10 -#define PCI_CLASS_CODE_DATA 0x11 -/* Base Class 0x12 - 0xFE is reserved */ -#define PCI_CLASS_CODE_OTHER 0xFF - #define PCI_CLASS_SUB_CODE 0x0a /* Device sub-class code */ -#define PCI_CLASS_SUB_CODE_TOO_OLD_NOTVGA 0x00 -#define PCI_CLASS_SUB_CODE_TOO_OLD_VGA 0x01 -#define PCI_CLASS_SUB_CODE_STORAGE_SCSI 0x00 -#define PCI_CLASS_SUB_CODE_STORAGE_IDE 0x01 -#define PCI_CLASS_SUB_CODE_STORAGE_FLOPPY 0x02 -#define PCI_CLASS_SUB_CODE_STORAGE_IPIBUS 0x03 -#define PCI_CLASS_SUB_CODE_STORAGE_RAID 0x04 -#define PCI_CLASS_SUB_CODE_STORAGE_ATA 0x05 -#define PCI_CLASS_SUB_CODE_STORAGE_SATA 0x06 -#define PCI_CLASS_SUB_CODE_STORAGE_SAS 0x07 -#define PCI_CLASS_SUB_CODE_STORAGE_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_NETWORK_ETHERNET 0x00 -#define PCI_CLASS_SUB_CODE_NETWORK_TOKENRING 0x01 -#define PCI_CLASS_SUB_CODE_NETWORK_FDDI 0x02 -#define PCI_CLASS_SUB_CODE_NETWORK_ATM 0x03 -#define PCI_CLASS_SUB_CODE_NETWORK_ISDN 0x04 -#define PCI_CLASS_SUB_CODE_NETWORK_WORLDFIP 0x05 -#define PCI_CLASS_SUB_CODE_NETWORK_PICMG 0x06 -#define PCI_CLASS_SUB_CODE_NETWORK_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_DISPLAY_VGA 0x00 -#define PCI_CLASS_SUB_CODE_DISPLAY_XGA 0x01 -#define PCI_CLASS_SUB_CODE_DISPLAY_3D 0x02 -#define PCI_CLASS_SUB_CODE_DISPLAY_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_MULTIMEDIA_VIDEO 0x00 -#define PCI_CLASS_SUB_CODE_MULTIMEDIA_AUDIO 0x01 -#define PCI_CLASS_SUB_CODE_MULTIMEDIA_PHONE 0x02 -#define PCI_CLASS_SUB_CODE_MULTIMEDIA_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_MEMORY_RAM 0x00 -#define PCI_CLASS_SUB_CODE_MEMORY_FLASH 0x01 -#define PCI_CLASS_SUB_CODE_MEMORY_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_BRIDGE_HOST 0x00 -#define PCI_CLASS_SUB_CODE_BRIDGE_ISA 0x01 -#define PCI_CLASS_SUB_CODE_BRIDGE_EISA 0x02 -#define PCI_CLASS_SUB_CODE_BRIDGE_MCA 0x03 -#define PCI_CLASS_SUB_CODE_BRIDGE_PCI 0x04 -#define PCI_CLASS_SUB_CODE_BRIDGE_PCMCIA 0x05 -#define PCI_CLASS_SUB_CODE_BRIDGE_NUBUS 0x06 -#define PCI_CLASS_SUB_CODE_BRIDGE_CARDBUS 0x07 -#define PCI_CLASS_SUB_CODE_BRIDGE_RACEWAY 0x08 -#define PCI_CLASS_SUB_CODE_BRIDGE_SEMI_PCI 0x09 -#define PCI_CLASS_SUB_CODE_BRIDGE_INFINIBAND 0x0A -#define PCI_CLASS_SUB_CODE_BRIDGE_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_COMM_SERIAL 0x00 -#define PCI_CLASS_SUB_CODE_COMM_PARALLEL 0x01 -#define PCI_CLASS_SUB_CODE_COMM_MULTIPORT 0x02 -#define PCI_CLASS_SUB_CODE_COMM_MODEM 0x03 -#define PCI_CLASS_SUB_CODE_COMM_GPIB 0x04 -#define PCI_CLASS_SUB_CODE_COMM_SMARTCARD 0x05 -#define PCI_CLASS_SUB_CODE_COMM_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_PERIPHERAL_PIC 0x00 -#define PCI_CLASS_SUB_CODE_PERIPHERAL_DMA 0x01 -#define PCI_CLASS_SUB_CODE_PERIPHERAL_TIMER 0x02 -#define PCI_CLASS_SUB_CODE_PERIPHERAL_RTC 0x03 -#define PCI_CLASS_SUB_CODE_PERIPHERAL_HOTPLUG 0x04 -#define PCI_CLASS_SUB_CODE_PERIPHERAL_SD 0x05 -#define PCI_CLASS_SUB_CODE_PERIPHERAL_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_INPUT_KEYBOARD 0x00 -#define PCI_CLASS_SUB_CODE_INPUT_DIGITIZER 0x01 -#define PCI_CLASS_SUB_CODE_INPUT_MOUSE 0x02 -#define PCI_CLASS_SUB_CODE_INPUT_SCANNER 0x03 -#define PCI_CLASS_SUB_CODE_INPUT_GAMEPORT 0x04 -#define PCI_CLASS_SUB_CODE_INPUT_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_DOCKING_GENERIC 0x00 -#define PCI_CLASS_SUB_CODE_DOCKING_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_PROCESSOR_386 0x00 -#define PCI_CLASS_SUB_CODE_PROCESSOR_486 0x01 -#define PCI_CLASS_SUB_CODE_PROCESSOR_PENTIUM 0x02 -#define PCI_CLASS_SUB_CODE_PROCESSOR_ALPHA 0x10 -#define PCI_CLASS_SUB_CODE_PROCESSOR_POWERPC 0x20 -#define PCI_CLASS_SUB_CODE_PROCESSOR_MIPS 0x30 -#define PCI_CLASS_SUB_CODE_PROCESSOR_COPROC 0x40 -#define PCI_CLASS_SUB_CODE_SERIAL_1394 0x00 -#define PCI_CLASS_SUB_CODE_SERIAL_ACCESSBUS 0x01 -#define PCI_CLASS_SUB_CODE_SERIAL_SSA 0x02 -#define PCI_CLASS_SUB_CODE_SERIAL_USB 0x03 -#define PCI_CLASS_SUB_CODE_SERIAL_FIBRECHAN 0x04 -#define PCI_CLASS_SUB_CODE_SERIAL_SMBUS 0x05 -#define PCI_CLASS_SUB_CODE_SERIAL_INFINIBAND 0x06 -#define PCI_CLASS_SUB_CODE_SERIAL_IPMI 0x07 -#define PCI_CLASS_SUB_CODE_SERIAL_SERCOS 0x08 -#define PCI_CLASS_SUB_CODE_SERIAL_CANBUS 0x09 -#define PCI_CLASS_SUB_CODE_WIRELESS_IRDA 0x00 -#define PCI_CLASS_SUB_CODE_WIRELESS_IR 0x01 -#define PCI_CLASS_SUB_CODE_WIRELESS_RF 0x10 -#define PCI_CLASS_SUB_CODE_WIRELESS_BLUETOOTH 0x11 -#define PCI_CLASS_SUB_CODE_WIRELESS_BROADBAND 0x12 -#define PCI_CLASS_SUB_CODE_WIRELESS_80211A 0x20 -#define PCI_CLASS_SUB_CODE_WIRELESS_80211B 0x21 -#define PCI_CLASS_SUB_CODE_WIRELESS_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_I2O_V1_0 0x00 -#define PCI_CLASS_SUB_CODE_SATELLITE_TV 0x01 -#define PCI_CLASS_SUB_CODE_SATELLITE_AUDIO 0x02 -#define PCI_CLASS_SUB_CODE_SATELLITE_VOICE 0x03 -#define PCI_CLASS_SUB_CODE_SATELLITE_DATA 0x04 -#define PCI_CLASS_SUB_CODE_CRYPTO_NETWORK 0x00 -#define PCI_CLASS_SUB_CODE_CRYPTO_ENTERTAINMENT 0x10 -#define PCI_CLASS_SUB_CODE_CRYPTO_OTHER 0x80 -#define PCI_CLASS_SUB_CODE_DATA_DPIO 0x00 -#define PCI_CLASS_SUB_CODE_DATA_PERFCNTR 0x01 -#define PCI_CLASS_SUB_CODE_DATA_COMMSYNC 0x10 -#define PCI_CLASS_SUB_CODE_DATA_MGMT 0x20 -#define PCI_CLASS_SUB_CODE_DATA_OTHER 0x80 #define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ #define PCI_LATENCY_TIMER 0x0d /* 8 bits */ diff --git a/include/pci_ids.h b/include/pci_ids.h index 3c5434c..88b0a64 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -55,6 +55,8 @@ #define PCI_CLASS_BRIDGE_EISA 0x0602 #define PCI_CLASS_BRIDGE_MC 0x0603 #define PCI_CLASS_BRIDGE_PCI 0x0604 +#define PCI_CLASS_BRIDGE_PCI_NORMAL 0x060400 +#define PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE 0x060401 #define PCI_CLASS_BRIDGE_PCMCIA 0x0605 #define PCI_CLASS_BRIDGE_NUBUS 0x0606 #define PCI_CLASS_BRIDGE_CARDBUS 0x0607 diff --git a/include/phy.h b/include/phy.h index c66fd43..9ea4bd4 100644 --- a/include/phy.h +++ b/include/phy.h @@ -454,6 +454,32 @@ void phy_connect_dev(struct phy_device *phydev, struct udevice *dev); struct phy_device *phy_connect(struct mii_dev *bus, int addr, struct udevice *dev, phy_interface_t interface); +/** + * phy_device_create() - Create a PHY device + * + * @bus: MII/MDIO bus that hosts the PHY + * @addr: PHY address on MDIO bus + * @phy_id: where to store the ID retrieved + * @is_c45: Device Identifiers if is_c45 + * @interface: interface between the MAC and PHY + * @return: pointer to phy_device if a PHY is found, or NULL otherwise + */ +struct phy_device *phy_device_create(struct mii_dev *bus, int addr, + u32 phy_id, bool is_c45, + phy_interface_t interface); + +/** + * phy_connect_phy_id() - Connect to phy device by reading PHY id + * from phy node. + * + * @bus: MII/MDIO bus that hosts the PHY + * @dev: Ethernet device to associate to the PHY + * @interface: Interface between the MAC and PHY + * @return: pointer to phy_device if a PHY is found, + * or NULL otherwise + */ +struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev, + phy_interface_t interface); static inline ofnode phy_get_ofnode(struct phy_device *phydev) { diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h index f4383ed..278f254 100644 --- a/include/power/pfuze100_pmic.h +++ b/include/power/pfuze100_pmic.h @@ -18,6 +18,11 @@ enum { PFUZE100_REVID = 0x03, PFUZE100_FABID = 0x04, + PFUZE100_MEMA = 0x1c, + PFUZE100_MEMB = 0x1d, + PFUZE100_MEMC = 0x1e, + PFUZE100_MEMD = 0x1f, + PFUZE100_SW1ABVOL = 0x20, PFUZE100_SW1ABSTBY = 0x21, PFUZE100_SW1ABOFF = 0x22, diff --git a/include/scmi_agent.h b/include/scmi_agent.h index 5015c06..18bcd48 100644 --- a/include/scmi_agent.h +++ b/include/scmi_agent.h @@ -51,7 +51,7 @@ struct scmi_msg { * Caller sets scmi_msg::out_msg_sz to the output message buffer size. * On return, scmi_msg::out_msg_sz stores the response payload size. * - * @dev: SCMI agent device + * @dev: SCMI device * @msg: Message structure reference * Return: 0 on success and a negative errno on failure */ diff --git a/include/scmi_protocols.h b/include/scmi_protocols.h index ef26e72..a220cb2 100644 --- a/include/scmi_protocols.h +++ b/include/scmi_protocols.h @@ -41,21 +41,64 @@ enum scmi_status_code { }; /* + * Generic message IDs + */ +enum scmi_discovery_id { + SCMI_PROTOCOL_VERSION = 0x0, + SCMI_PROTOCOL_ATTRIBUTES = 0x1, + SCMI_PROTOCOL_MESSAGE_ATTRIBUTES = 0x2, +}; + +/* * SCMI Clock Protocol */ enum scmi_clock_message_id { + SCMI_CLOCK_ATTRIBUTES = 0x3, SCMI_CLOCK_RATE_SET = 0x5, SCMI_CLOCK_RATE_GET = 0x6, SCMI_CLOCK_CONFIG_SET = 0x7, }; +#define SCMI_CLK_PROTO_ATTR_COUNT_MASK GENMASK(15, 0) #define SCMI_CLK_RATE_ASYNC_NOTIFY BIT(0) #define SCMI_CLK_RATE_ASYNC_NORESP (BIT(0) | BIT(1)) #define SCMI_CLK_RATE_ROUND_DOWN 0 #define SCMI_CLK_RATE_ROUND_UP BIT(2) #define SCMI_CLK_RATE_ROUND_CLOSEST BIT(3) +#define SCMI_CLOCK_NAME_LENGTH_MAX 16 + +/** + * struct scmi_clk_get_nb_out - Response for SCMI_PROTOCOL_ATTRIBUTES command + * @status: SCMI command status + * @attributes: Attributes of the clock protocol, mainly number of clocks exposed + */ +struct scmi_clk_protocol_attr_out { + s32 status; + u32 attributes; +}; + +/** + * struct scmi_clk_attribute_in - Message payload for SCMI_CLOCK_ATTRIBUTES command + * @clock_id: SCMI clock ID + */ +struct scmi_clk_attribute_in { + u32 clock_id; +}; + +/** + * struct scmi_clk_get_nb_out - Response payload for SCMI_CLOCK_ATTRIBUTES command + * @status: SCMI command status + * @attributes: clock attributes + * @clock_name: name of the clock + */ +struct scmi_clk_attribute_out { + s32 status; + u32 attributes; + char clock_name[SCMI_CLOCK_NAME_LENGTH_MAX]; +}; + /** * struct scmi_clk_state_in - Message payload for CLOCK_CONFIG_SET command * @clock_id: SCMI clock ID diff --git a/include/semihosting.h b/include/semihosting.h new file mode 100644 index 0000000..f1f7346 --- /dev/null +++ b/include/semihosting.h @@ -0,0 +1,149 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2022 Sean Anderson <sean.anderson@seco.com> + */ + +#ifndef _SEMIHOSTING_H +#define _SEMIHOSTING_H + +/* + * These are the encoded instructions used to indicate a semihosting trap. They + * are named like SMH_ISA_INSN, where ISA is the instruction set (e.g. + * AArch64), and INSN is the mneumonic for the instruction. + */ +#define SMH_A64_HLT 0xD45E0000 +#define SMH_A32_SVC 0xEF123456 +#define SMH_A32_HLT 0xE10F0070 +#define SMH_T32_SVC 0xDFAB +#define SMH_T32_HLT 0xBABC + +#if CONFIG_IS_ENABLED(SEMIHOSTING_FALLBACK) +/** + * semihosting_enabled() - Determine whether semihosting is supported + * + * Semihosting-based drivers should call this function before making other + * semihosting calls. + * + * Return: %true if a debugger is attached which supports semihosting, %false + * otherwise + */ +bool semihosting_enabled(void); + +/** + * disable_semihosting() - Cause semihosting_enabled() to return false + * + * If U-Boot ever receives an unhandled exception caused by a semihosting trap, + * the trap handler should call this function. + */ +void disable_semihosting(void); +#else +static inline bool semihosting_enabled(void) +{ + return CONFIG_IS_ENABLED(SEMIHOSTING); +} + +static inline void disable_semihosting(void) +{ +} +#endif + +/** + * enum smh_open_mode - Numeric file modes for use with smh_open() + * MODE_READ: 'r' + * MODE_BINARY: 'b' + * MODE_PLUS: '+' + * MODE_WRITE: 'w' + * MODE_APPEND: 'a' + * + * These modes represent the mode string used by fopen(3) in a form which can + * be passed to smh_open(). These do NOT correspond directly to %O_RDONLY, + * %O_CREAT, etc; see fopen(3) for details. In particular, @MODE_PLUS + * effectively results in adding %O_RDWR, and @MODE_WRITE will add %O_TRUNC. + * For compatibility, @MODE_BINARY should be added when opening non-text files + * (such as images). + */ +enum smh_open_mode { + MODE_READ = 0x0, + MODE_BINARY = 0x1, + MODE_PLUS = 0x2, + MODE_WRITE = 0x4, + MODE_APPEND = 0x8, +}; + +/** + * smh_open() - Open a file on the host + * @fname: The name of the file to open + * @mode: The mode to use when opening the file + * + * Return: Either a file descriptor or a negative error on failure + */ +long smh_open(const char *fname, enum smh_open_mode mode); + +/** + * smh_read() - Read data from a file + * @fd: A file descriptor returned from smh_open() + * @memp: Pointer to a buffer of memory of at least @len bytes + * @len: The number of bytes to read + * + * Return: + * * The number of bytes read on success, with 0 indicating %EOF + * * A negative error on failure + */ +long smh_read(long fd, void *memp, size_t len); + +/** + * smh_write() - Write data to a file + * @fd: A file descriptor returned from smh_open() + * @memp: Pointer to a buffer of memory of at least @len bytes + * @len: The number of bytes to read + * @written: Pointer which will be updated with the actual bytes written + * + * Return: 0 on success or negative error on failure + */ +long smh_write(long fd, const void *memp, size_t len, ulong *written); + +/** + * smh_close() - Close an open file + * @fd: A file descriptor returned from smh_open() + * + * Return: 0 on success or negative error on failure + */ +long smh_close(long fd); + +/** + * smh_flen() - Get the length of a file + * @fd: A file descriptor returned from smh_open() + * + * Return: The length of the file, in bytes, or a negative error on failure + */ +long smh_flen(long fd); + +/** + * smh_seek() - Seek to a position in a file + * @fd: A file descriptor returned from smh_open() + * @pos: The offset (in bytes) to seek to + * + * Return: 0 on success or negative error on failure + */ +long smh_seek(long fd, long pos); + +/** + * smh_getc() - Read a character from stdin + * + * Return: The character read, or a negative error on failure + */ +int smh_getc(void); + +/** + * smh_putc() - Print a character on stdout + * @ch: The character to print + */ +void smh_putc(char ch); + +/** + * smh_write0() - Print a nul-terminated string on stdout + * @s: The string to print + */ +void smh_puts(const char *s); + +#endif /* _SEMIHOSTING_H */ diff --git a/include/semihostingfs.h b/include/semihostingfs.h new file mode 100644 index 0000000..25ebdbb --- /dev/null +++ b/include/semihostingfs.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2022, Sean Anderson <sean.anderson@seco.com> + * Copyright (c) 2012, Google Inc. + */ + +#ifndef __SEMIHOSTING_FS__ +#define __SEMIHOSTING_FS__ + +struct blk_desc; +struct disk_partition; + +int smh_fs_set_blk_dev(struct blk_desc *rbdd, struct disk_partition *info); +void smh_fs_close(void); +int smh_fs_size(const char *filename, loff_t *size); +int smh_fs_read(const char *filename, void *buf, loff_t offset, loff_t len, + loff_t *actread); +int smh_fs_write(const char *filename, void *buf, loff_t offset, + loff_t len, loff_t *actwrite); + +#endif diff --git a/include/serial.h b/include/serial.h index 19a8c0c..8c2e7ad 100644 --- a/include/serial.h +++ b/include/serial.h @@ -23,6 +23,7 @@ struct serial_device { void default_serial_puts(const char *s); extern struct serial_device serial_smc_device; +extern struct serial_device serial_smh_device; extern struct serial_device serial_scc_device; extern struct serial_device *default_serial_console(void); @@ -195,6 +196,24 @@ struct dm_serial_ops { */ int (*putc)(struct udevice *dev, const char ch); /** + * puts() - Write a string + * + * This writes a string. This function should be implemented only if + * writing multiple characters at once is more performant than just + * calling putc() in a loop. + * + * If the whole string cannot be written at once, then this function + * should return the number of characters written. Returning a negative + * error code implies that no characters were written. If this function + * returns 0, then it will be called again with the same arguments. + * + * @dev: Device pointer + * @s: The string to write + * @len: The length of the string to write. + * @return The number of characters written on success, or -ve on error + */ + ssize_t (*puts)(struct udevice *dev, const char *s, size_t len); + /** * pending() - Check if input/output characters are waiting * * This can be used to return an indication of the number of waiting diff --git a/include/u-boot/lz4.h b/include/u-boot/lz4.h index e18b39a..655adbf 100644 --- a/include/u-boot/lz4.h +++ b/include/u-boot/lz4.h @@ -21,4 +21,53 @@ */ int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); +/** + * LZ4_decompress_safe() - Decompression protected against buffer overflow + * @source: source address of the compressed data + * @dest: output buffer address of the uncompressed data + * which must be already allocated + * @compressedSize: is the precise full size of the compressed block + * @maxDecompressedSize: is the size of 'dest' buffer + * + * Decompresses data from 'source' into 'dest'. + * If the source stream is detected malformed, the function will + * stop decoding and return a negative result. + * This function is protected against buffer overflow exploits, + * including malicious data packets. It never writes outside output buffer, + * nor reads outside input buffer. + * + * Return: number of bytes decompressed into destination buffer + * (necessarily <= maxDecompressedSize) + * or a negative result in case of error + */ +int LZ4_decompress_safe(const char *source, char *dest, + int compressedSize, int maxDecompressedSize); + +/** + * LZ4_decompress_safe_partial() - Decompress a block of size 'compressedSize' + * at position 'source' into buffer 'dest' + * @source: source address of the compressed data + * @dest: output buffer address of the decompressed data which must be + * already allocated + * @compressedSize: is the precise full size of the compressed block. + * @targetOutputSize: the decompression operation will try + * to stop as soon as 'targetOutputSize' has been reached + * @maxDecompressedSize: is the size of destination buffer + * + * This function decompresses a compressed block of size 'compressedSize' + * at position 'source' into destination buffer 'dest' + * of size 'maxDecompressedSize'. + * The function tries to stop decompressing operation as soon as + * 'targetOutputSize' has been reached, reducing decompression time. + * This function never writes outside of output buffer, + * and never reads outside of input buffer. + * It is therefore protected against malicious data packets. + * + * Return: the number of bytes decoded in the destination buffer + * (necessarily <= maxDecompressedSize) + * or a negative result in case of error + * + */ +int LZ4_decompress_safe_partial(const char *src, char *dst, + int compressedSize, int targetOutputSize, int dstCapacity); #endif diff --git a/include/video.h b/include/video.h index 48a71dc..43e2c89 100644 --- a/include/video.h +++ b/include/video.h @@ -1,13 +1,7 @@ /* - * Video uclass and legacy implementation + * Video uclass to support displays (see also vidconsole for text) * * Copyright (c) 2015 Google, Inc - * - * MPC823 Video Controller - * ======================= - * (C) 2000 by Paolo Scaffardi (arsenio@tin.it) - * AIRVENT SAM s.p.a - RIMINI(ITALY) - * */ #ifndef _VIDEO_H_ @@ -155,7 +149,6 @@ struct video_ops { */ int video_reserve(ulong *addrp); -#ifdef CONFIG_DM_VIDEO /** * video_clear() - Clear a device's frame buffer to background color. * @@ -163,7 +156,6 @@ int video_reserve(ulong *addrp); * Return: 0 */ int video_clear(struct udevice *dev); -#endif /* CONFIG_DM_VIDEO */ /** * video_sync() - Sync a device's frame buffer with its hardware @@ -283,78 +275,4 @@ static inline int video_sync_copy_all(struct udevice *dev) */ bool video_is_active(void); -#ifndef CONFIG_DM_VIDEO - -/* Video functions */ - -/** - * Display a BMP format bitmap on the screen - * - * @param bmp_image Address of BMP image - * @param x X position to draw image - * @param y Y position to draw image - */ -int video_display_bitmap(ulong bmp_image, int x, int y); - -/** - * Get the width of the screen in pixels - * - * Return: width of screen in pixels - */ -int video_get_pixel_width(void); - -/** - * Get the height of the screen in pixels - * - * Return: height of screen in pixels - */ -int video_get_pixel_height(void); - -/** - * Get the number of text lines/rows on the screen - * - * Return: number of rows - */ -int video_get_screen_rows(void); - -/** - * Get the number of text columns on the screen - * - * Return: number of columns - */ -int video_get_screen_columns(void); - -/** - * Set the position of the text cursor - * - * @param col Column to place cursor (0 = left side) - * @param row Row to place cursor (0 = top line) - */ -void video_position_cursor(unsigned col, unsigned row); - -/* Clear the display */ -void video_clear(void); - -#if defined(CONFIG_FORMIKE) -int kwh043st20_f01_spi_startup(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int spi_mode); -#endif -#if defined(CONFIG_LG4573) -int lg4573_spi_startup(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int spi_mode); -#endif - -/* - * video_get_info_str() - obtain a board string: type, speed, etc. - * - * This is called if CONFIG_CONSOLE_EXTRA_INFO is enabled. - * - * line_number: location to place info string beside logo - * info: buffer for info string (empty if nothing to display on this - * line) - */ -void video_get_info_str(int line_number, char *info); - -#endif /* !CONFIG_DM_VIDEO */ - #endif diff --git a/include/video_fb.h b/include/video_fb.h deleted file mode 100644 index e410226..0000000 --- a/include/video_fb.h +++ /dev/null @@ -1,91 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 1997-2002 ELTEC Elektronik AG - * Frank Gottschling <fgottschling@eltec.de> - */ - -/* - * smiLynxEM.h - * Silicon Motion graphic interface for sm810/sm710/sm712 accelerator - * - * - * modification history - * -------------------- - * 04-18-2002 Rewritten for U-Boot <fgottschling@eltec.de>. - */ - -#ifndef _VIDEO_FB_H_ -#define _VIDEO_FB_H_ - -/* - * Graphic Data Format (GDF) bits for VIDEO_DATA_FORMAT - */ -#define GDF__8BIT_INDEX 0 -#define GDF_15BIT_555RGB 1 -#define GDF_16BIT_565RGB 2 -#define GDF_32BIT_X888RGB 3 -#define GDF_24BIT_888RGB 4 -#define GDF__8BIT_332RGB 5 - -/******************************************************************************/ -/* Export Graphic Driver Control */ -/******************************************************************************/ - -typedef struct graphic_device { - unsigned int isaBase; - unsigned int pciBase; - unsigned int dprBase; - unsigned int vprBase; - unsigned int cprBase; - unsigned int frameAdrs; - unsigned int memSize; - unsigned int mode; - unsigned int gdfIndex; - unsigned int gdfBytesPP; - unsigned int fg; - unsigned int bg; - unsigned int plnSizeX; - unsigned int plnSizeY; - unsigned int winSizeX; - unsigned int winSizeY; - char modeIdent[80]; -} GraphicDevice; - - -/******************************************************************************/ -/* Export Graphic Functions */ -/******************************************************************************/ - -void *video_hw_init (void); /* returns GraphicDevice struct or NULL */ - -#ifdef VIDEO_HW_BITBLT -void video_hw_bitblt ( - unsigned int bpp, /* bytes per pixel */ - unsigned int src_x, /* source pos x */ - unsigned int src_y, /* source pos y */ - unsigned int dst_x, /* dest pos x */ - unsigned int dst_y, /* dest pos y */ - unsigned int dim_x, /* frame width */ - unsigned int dim_y /* frame height */ - ); -#endif - -#ifdef VIDEO_HW_RECTFILL -void video_hw_rectfill ( - unsigned int bpp, /* bytes per pixel */ - unsigned int dst_x, /* dest pos x */ - unsigned int dst_y, /* dest pos y */ - unsigned int dim_x, /* frame width */ - unsigned int dim_y, /* frame height */ - unsigned int color /* fill color */ - ); -#endif - -void video_set_lut ( - unsigned int index, /* color number */ - unsigned char r, /* red */ - unsigned char g, /* green */ - unsigned char b /* blue */ - ); - -#endif /*_VIDEO_FB_H_ */ diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h index 50bf4ef..f577008 100644 --- a/include/zynqmp_firmware.h +++ b/include/zynqmp_firmware.h @@ -177,6 +177,49 @@ enum pm_query_id { PM_QID_CLOCK_GET_MAX_DIVISOR = 13, }; +enum pm_pinctrl_config_param { + PM_PINCTRL_CONFIG_SLEW_RATE = 0, + PM_PINCTRL_CONFIG_BIAS_STATUS = 1, + PM_PINCTRL_CONFIG_PULL_CTRL = 2, + PM_PINCTRL_CONFIG_SCHMITT_CMOS = 3, + PM_PINCTRL_CONFIG_DRIVE_STRENGTH = 4, + PM_PINCTRL_CONFIG_VOLTAGE_STATUS = 5, + PM_PINCTRL_CONFIG_TRI_STATE = 6, + PM_PINCTRL_CONFIG_MAX = 7, +}; + +enum pm_pinctrl_slew_rate { + PM_PINCTRL_SLEW_RATE_FAST = 0, + PM_PINCTRL_SLEW_RATE_SLOW = 1, +}; + +enum pm_pinctrl_bias_status { + PM_PINCTRL_BIAS_DISABLE = 0, + PM_PINCTRL_BIAS_ENABLE = 1, +}; + +enum pm_pinctrl_pull_ctrl { + PM_PINCTRL_BIAS_PULL_DOWN = 0, + PM_PINCTRL_BIAS_PULL_UP = 1, +}; + +enum pm_pinctrl_schmitt_cmos { + PM_PINCTRL_INPUT_TYPE_CMOS = 0, + PM_PINCTRL_INPUT_TYPE_SCHMITT = 1, +}; + +enum pm_pinctrl_drive_strength { + PM_PINCTRL_DRIVE_STRENGTH_2MA = 0, + PM_PINCTRL_DRIVE_STRENGTH_4MA = 1, + PM_PINCTRL_DRIVE_STRENGTH_8MA = 2, + PM_PINCTRL_DRIVE_STRENGTH_12MA = 3, +}; + +enum pm_pinctrl_tri_state { + PM_PINCTRL_TRI_STATE_DISABLE = 0, + PM_PINCTRL_TRI_STATE_ENABLE = 1, +}; + enum zynqmp_pm_reset_action { PM_RESET_ACTION_RELEASE = 0, PM_RESET_ACTION_ASSERT = 1, @@ -340,6 +383,29 @@ enum pm_ioctl_id { IOCTL_GET_LAST_RESET_REASON = 23, /* AIE ISR Clear */ IOCTL_AIE_ISR_CLEAR = 24, + /* Register SGI to ATF */ + IOCTL_REGISTER_SGI = 25, + /* Runtime feature configuration */ + IOCTL_SET_FEATURE_CONFIG = 26, + IOCTL_GET_FEATURE_CONFIG = 27, + /* IOCTL for Secure Read/Write Interface */ + IOCTL_READ_REG = 28, + IOCTL_MASK_WRITE_REG = 29, + /* Dynamic SD/GEM/USB configuration */ + IOCTL_SET_SD_CONFIG = 30, + IOCTL_SET_GEM_CONFIG = 31, + IOCTL_SET_USB_CONFIG = 32, + /* AIE/AIEML Operations */ + IOCTL_AIE_OPS = 33, + /* IOCTL to get default/current QoS */ + IOCTL_GET_QOS = 34, +}; + +enum pm_sd_config_type { + SD_CONFIG_EMMC_SEL = 1, /* To set SD_EMMC_SEL in CTRL_REG_SD */ + SD_CONFIG_BASECLK = 2, /* To set SD_BASECLK in SD_CONFIG_REG1 */ + SD_CONFIG_8BIT = 3, /* To set SD_8BIT in SD_CONFIG_REG2 */ + SD_CONFIG_FIXED = 4, /* To set fixed config registers */ }; #define PM_SIP_SVC 0xc2000000 @@ -372,6 +438,8 @@ int zynqmp_pmufw_config_close(void); void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size); int xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 *ret_payload); +int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value); +int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id); /* Type of Config Object */ #define PM_CONFIG_OBJECT_TYPE_BASE 0x1U @@ -403,5 +471,9 @@ enum zynqmp_pm_request_ack { #define ZYNQMP_PM_CAPABILITY_UNUSABLE 0x8U #define ZYNQMP_PM_MAX_QOS 100U +/* Firmware feature check version mask */ +#define FIRMWARE_VERSION_MASK GENMASK(15, 0) +/* PM API versions */ +#define PM_API_VERSION_2 2 #endif /* _ZYNQMP_FIRMWARE_H_ */ |