Finish CONFIG_VID et al conversion to Kconfig

This converts the following to Kconfig:
   CONFIG_VID
   CONFIG_VOL_MONITOR_INA220
   CONFIG_VOL_MONITOR_IR36021_READ
   CONFIG_VOL_MONITOR_IR36021_SET
   CONFIG_VOL_MONITOR_LTC3882_READ
   CONFIG_VOL_MONITOR_LTC3882_SET

To finish this migration, we first need to introduce CONFIG_SPL_VID as
some platforms only use this code in full U-Boot while others use it in
SPL as well.  To make the Kconfig logic clearer, guard all of the
sub-options with a if VID || SPL_VID check.  Finally, add Kconfig
options for the remaining related options that did not previously have
one.

Signed-off-by: Tom Rini <trini@konsulko.com>

11 files changed, 0 insertions, 66 deletions

diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index bfd06a5..0542db5 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -360,12 +360,6 @@ unsigned long get_board_sys_clk(void);
 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 
-#define CONFIG_VID_FLS_ENV		"t208xqds_vdd_mv"
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_VID
-#endif
-#define CONFIG_VOL_MONITOR_IR36021_SET
-#define CONFIG_VOL_MONITOR_IR36021_READ
 /* The lowest and highest voltage allowed for T208xQDS */
 #define VDD_MV_MIN			819
 #define VDD_MV_MAX			1212
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index afd9367..1a8d51c 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -312,12 +312,6 @@ unsigned long get_board_sys_clk(void);
 
 #define I2C_MUX_CH_VOL_MONITOR	0xa
 
-#define CONFIG_VID_FLS_ENV		"t208xrdb_vdd_mv"
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_VID
-#endif
-#define CONFIG_VOL_MONITOR_IR36021_SET
-#define CONFIG_VOL_MONITOR_IR36021_READ
 /* The lowest and highest voltage allowed for T208xRDB */
 #define VDD_MV_MIN			819
 #define VDD_MV_MAX			1212
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 9c412ec..6a67212 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -408,12 +408,6 @@ unsigned long get_board_sys_clk(void);
 #define I2C_VOL_MONITOR_BUS_V_OVF	0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT	3
 
-#define CONFIG_VID_FLS_ENV		"t4240rdb_vdd_mv"
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_VID
-#endif
-#define CONFIG_VOL_MONITOR_IR36021_SET
-#define CONFIG_VOL_MONITOR_IR36021_READ
 /* The lowest and highest voltage allowed for T4240RDB */
 #define VDD_MV_MIN			819
 #define VDD_MV_MAX			1212
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index ee56605..929830e 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -330,12 +330,6 @@ unsigned long get_board_sys_clk(void);
 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 
-#define CONFIG_VID_FLS_ENV		"ls1043aqds_vdd_mv"
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_VID
-#endif
-#define CONFIG_VOL_MONITOR_IR36021_SET
-#define CONFIG_VOL_MONITOR_INA220
 /* The lowest and highest voltage allowed for LS1043AQDS */
 #define VDD_MV_MIN			819
 #define VDD_MV_MAX			1212
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index c032ebe..d1803d2 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -338,12 +338,6 @@ unsigned long get_board_sys_clk(void);
 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 
-#define CONFIG_VID_FLS_ENV		"ls1046aqds_vdd_mv"
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_VID
-#endif
-#define CONFIG_VOL_MONITOR_IR36021_SET
-#define CONFIG_VOL_MONITOR_INA220
 /* The lowest and highest voltage allowed for LS1046AQDS */
 #define VDD_MV_MIN			819
 #define VDD_MV_MAX			1212
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 0c22fa9..dcf73a9 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -298,16 +298,10 @@ unsigned long get_board_sys_clk(void);
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 #define I2C_SVDD_MONITOR_ADDR           0x4F
 
-#define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
-#define CONFIG_VID
-
 /* The lowest and highest voltage allowed for LS1088AQDS */
 #define VDD_MV_MIN			819
 #define VDD_MV_MAX			1212
 
-#define CONFIG_VOL_MONITOR_LTC3882_SET
-#define CONFIG_VOL_MONITOR_LTC3882_READ
-
 #define PWM_CHANNEL0                    0x0
 
 /*
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 9351042..0f7778c 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -197,16 +197,10 @@
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 #define I2C_SVDD_MONITOR_ADDR		0x4F
 
-#define CONFIG_VID_FLS_ENV              "ls1088ardb_vdd_mv"
-#define CONFIG_VID
-
 /* The lowest and highest voltage allowed for LS1088ARDB */
 #define VDD_MV_MIN			819
 #define VDD_MV_MAX			1212
 
-#define CONFIG_VOL_MONITOR_LTC3882_SET
-#define CONFIG_VOL_MONITOR_LTC3882_READ
-
 #define PWM_CHANNEL0                    0x0
 
 /*
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 50d6b03..96b804b 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -17,13 +17,7 @@
 
 #define I2C_MUX_CH_VOL_MONITOR		0xa
 #define I2C_VOL_MONITOR_ADDR		0x38
-#define CONFIG_VOL_MONITOR_IR36021_READ
-#define CONFIG_VOL_MONITOR_IR36021_SET
 
-#define CONFIG_VID_FLS_ENV		"ls2080ardb_vdd_mv"
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_VID
-#endif
 /* step the IR regulator in 5mV increments */
 #define IR_VDD_STEP_DOWN		5
 #define IR_VDD_STEP_UP			5
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index a04bbb6..a07ebeb 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -8,12 +8,6 @@
 
 #include "lx2160a_common.h"
 
-/* VID */
-#define CONFIG_VID_FLS_ENV		"lx2160aqds_vdd_mv"
-#define CONFIG_VID
-#define CONFIG_VOL_MONITOR_LTC3882_SET
-#define CONFIG_VOL_MONITOR_LTC3882_READ
-
 /* RTC */
 #define CONFIG_SYS_RTC_BUS_NUM		0
 
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index 4fd3e54..a8a9f82 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -8,12 +8,6 @@
 
 #include "lx2160a_common.h"
 
-/* VID */
-#define CONFIG_VID_FLS_ENV		"lx2160ardb_vdd_mv"
-#define CONFIG_VID
-#define CONFIG_VOL_MONITOR_LTC3882_SET
-#define CONFIG_VOL_MONITOR_LTC3882_READ
-
 /* RTC */
 #define CONFIG_SYS_RTC_BUS_NUM		4
 
diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h
index 67c469c..c2fa579 100644
--- a/include/configs/lx2162aqds.h
+++ b/include/configs/lx2162aqds.h
@@ -12,12 +12,6 @@
 #undef CONFIG_USB_MAX_CONTROLLER_COUNT
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 
-/* Voltage monitor on channel 2*/
-#define CONFIG_VID_FLS_ENV		"lx2162aqds_vdd_mv"
-#define CONFIG_VID
-#define CONFIG_VOL_MONITOR_LTC3882_SET
-#define CONFIG_VOL_MONITOR_LTC3882_READ
-
 /* RTC */
 #define CONFIG_SYS_RTC_BUS_NUM		0