Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_NAND_U_BOOT_LOCATIONS
   CONFIG_SYS_NAND_U_BOOT_OFFS

Signed-off-by: Tom Rini <trini@konsulko.com>

40 files changed, 0 insertions, 56 deletions

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 2599d32..dc8c3e2 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -192,7 +192,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
 /* NAND: SPL related configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 1ce0c47..3b70741 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -32,7 +32,6 @@
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
 /* NAND block size is 128 KiB.  Synchronize these values with
  * corresponding Device Tree entries in Linux:
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 309298e..5b7418b 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -183,7 +183,6 @@
 			}
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	26
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00180000
 /* NAND: SPL related configs */
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 6f75ca5..500c9ae 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -93,7 +93,6 @@
 
 #elif CONFIG_NAND_BOOT
 #define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
 
 #define CONFIG_SYS_NAND_ECCSIZE		256
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 48ec065..43f9852 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -114,6 +114,5 @@
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 
 #endif
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 798a100..f15711b 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -97,6 +97,5 @@
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 
 #endif
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 1dfe7d0..caedd30 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -46,7 +46,6 @@
 
 #ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #endif /* CONFIG_MTD_RAW_NAND */
 
 #ifdef CONFIG_MTD_RAW_NAND
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index 3ab973f..c7b2131 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -135,7 +135,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
 /* NAND: SPL related configs */
 
 /* USB configuration */
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 41a0e82..4b6e391 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -98,9 +98,6 @@
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
-#undef CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
-
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x500000
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index de432a4..f0e5bce 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -93,7 +93,6 @@
 
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index d90e944..8e8ea56 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -127,7 +127,6 @@
 #define CONFIG_SPL_PAD_TO		CONFIG_SPL_MAX_SIZE
 
 /* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x60000
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 66c8cd2..8113d75 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -140,7 +140,6 @@
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
 
 /* SPL OS boot options */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 1a0158d..11ef07c 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -91,7 +91,6 @@
 					 50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00140000
 /* NAND: SPL related configs */
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
diff --git a/include/configs/etamin.h b/include/configs/etamin.h
index e084a9f..20a8e26 100644
--- a/include/configs/etamin.h
+++ b/include/configs/etamin.h
@@ -15,7 +15,6 @@
 #include "siemens-am33x-common.h"
 /* NAND specific changes for etamin due to different page size */
 #undef CONFIG_SYS_NAND_ECCPOS
-#undef CONFIG_SYS_NAND_U_BOOT_OFFS
 #undef CONFIG_SYS_ENV_SECT_SIZE
 #undef CONFIG_NAND_OMAP_ECCSCHEME
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
@@ -49,8 +48,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE 512
 #define CONFIG_SYS_NAND_ECCBYTES 26
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x200000
-
 #undef CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_MAX_NAND_DEVICE      3
 #define CONFIG_SYS_NAND_BASE2           (0x18000000)    /* physical address */
diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index 45414f9..9d96dfc 100644
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -55,7 +55,6 @@
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
 #define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0xa0000
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index f028958..3f6afc1 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -8,7 +8,6 @@
 
 /* SPL */
 /* Location in NAND to read U-Boot from */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
 
 /* Falcon Mode */
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 1523e16..9af0a04 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -138,7 +138,6 @@
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
 # define CONFIG_SYS_NAND_BASE		0x40000000
 # define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-# define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
 
 /* MTD device */
 #endif
diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index c14ce83..f1b78c6 100644
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -130,7 +130,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00500000
 
 /* MTD device */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 795c8e5..748c04b 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -46,7 +46,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SPL_PAD_TO		0x1c000
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(400 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 5df42d9..1d15f2f 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -150,7 +150,6 @@ unsigned long get_board_sys_clk(void);
 
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
 #endif
 
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index f367ad6..0d071c4 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -109,7 +109,6 @@
 
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(1024 << 10)
 #endif
 
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index ca4b856..2e38240 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -165,7 +165,6 @@ unsigned long get_board_sys_clk(void);
 
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PAD_TO		0x40000		/* block aligned */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
 #endif
 
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 27fd397..e67dee0 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -208,7 +208,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
 
 #define CONFIG_SPL_PAD_TO		0x20000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
 #endif
 #else
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 928747f..54fab54 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -202,7 +202,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
 
 #define CONFIG_SPL_PAD_TO		0x80000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(1024 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 * 1024)
 #else
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
index 6d107a9..5dd5dda 100644
--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -139,7 +139,6 @@
 #define CONFIG_SPL_PAD_TO		0x8000
 #define CONFIG_SPL_STACK		0x70004000
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
 
 /*
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 30c6d2c..86fc8ed 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -27,7 +27,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 #define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
 /* NAND: SPL falcon mode configs */
 #if defined(CONFIG_SPL_OS_BOOT)
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 6f4bae3..3d039b6 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -83,7 +83,6 @@
 
 #elif CONFIG_NAND_BOOT
 #define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
 
 #define CONFIG_SYS_NAND_ECCSIZE		256
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index f6806f6..119b4a6 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -68,7 +68,6 @@
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 
 /* Falcon boot support on raw MMC */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x100  /* 128 KiB */
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 7a50069..67640f4 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -80,6 +80,5 @@
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 
 #endif
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 9aaafc1..e0e0bc6 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -44,6 +44,5 @@
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 
 #endif
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index c39674d..2549d4c 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -44,6 +44,5 @@
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 
 #endif
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 2c8bda1..fd74d57 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -90,8 +90,6 @@
 
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  * 64 bytes before this address should be set aside for u-boot.img's
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index cc5f538..2538287 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -162,7 +162,6 @@
 #define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h
index 0b37efe..fc1d451 100644
--- a/include/configs/socfpga_arria5_secu1.h
+++ b/include/configs/socfpga_arria5_secu1.h
@@ -111,11 +111,6 @@
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#undef CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-#endif
-
 #undef CONFIG_WATCHDOG_TIMEOUT_MSECS
 #define CONFIG_WATCHDOG_TIMEOUT_MSECS	60000
 
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 28495bc..31f95f5 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -196,13 +196,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 /* SPL QSPI boot support */
 
 /* SPL NAND boot support */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x100000
-#endif
-#endif
 
 /* Extra Environment */
 #ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index a4f1628..ede7199 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -135,7 +135,6 @@
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
 
 /* Setup MTD for NAND on the SOM */
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index fa4b6f4..1dd7823 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -164,7 +164,6 @@
 #define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 3962df5..5964b59 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -69,7 +69,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
 
 /* SPL */
 /* Defines for SPL */
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index cc6b96f..dbd4a00 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -193,8 +193,6 @@
 /* only for SPL */
 #define CONFIG_SPL_STACK		(0x00100000)
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS		0x20000
-
 /* subtract sizeof(struct image_header) */
 #define CONFIG_SYS_UBOOT_BASE			(0x130000 - 0x40)
 
diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index d6addf9..a45d3b4 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -86,7 +86,6 @@
 /* Use the framework and generic lib */
 /* SPL will use serial */
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS  0x00040000
 #define CONFIG_SPL_PAD_TO 0x20000
 /* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
 #define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */