Convert CONFIG_SPL_BSS_START_ADDR to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_BSS_START_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>

107 files changed, 2 insertions, 198 deletions

diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h
index d7ec317..b8a25e9 100644
--- a/include/configs/am64x_evm.h
+++ b/include/configs/am64x_evm.h
@@ -18,17 +18,7 @@
 /* DDR Configuration */
 #define CONFIG_SYS_SDRAM_BASE1		0x880000000
 
-#if defined(CONFIG_TARGET_AM642_A53_EVM)
-#else
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(TI_SRAM_SCRATCH_BOARD_EEPROM_START -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
+#if !defined(CONFIG_TARGET_AM642_A53_EVM)
 /* Set the stack right below the SPL BSS section */
 /* Configure R5 SPL post-relocation malloc pool in DDR */
 #define CONFIG_SYS_SPL_MALLOC_START    0x84000000
diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h
index 7849976..06aade0 100644
--- a/include/configs/am65x_evm.h
+++ b/include/configs/am65x_evm.h
@@ -18,17 +18,7 @@
 #define CONFIG_SYS_SDRAM_BASE1		0x880000000
 
 /* SPL Loader Configuration */
-#ifdef CONFIG_TARGET_AM654_A53_EVM
-#else
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
+#ifndef CONFIG_TARGET_AM654_A53_EVM
 /* Set the stack right below the SPL BSS section */
 /* Configure R5 SPL post-relocation malloc pool in DDR */
 #define CONFIG_SYS_SPL_MALLOC_START	0x84000000
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 85732e3..17e2d2d 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -41,7 +41,6 @@
 
 #ifdef CONFIG_SD_BOOT
 
-#define CONFIG_SPL_BSS_START_ADDR	0x70000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x70080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
 
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index b6346ae..d9b7269 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -53,7 +53,6 @@
 
 /* SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 446c5e1..f436e8a 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -53,7 +53,6 @@
 
 /* SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
index 7ca83a8..7a1b9db 100644
--- a/include/configs/ax25-ae350.h
+++ b/include/configs/ax25-ae350.h
@@ -7,10 +7,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_SPL
-#define CONFIG_SPL_BSS_START_ADDR	0x04000000
-#endif
-
 #define RISCV_MMODE_TIMERBASE           0xe6000000
 #define RISCV_MMODE_TIMER_FREQ          60000000
 
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 6591de4..0f3b53c 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -68,7 +68,6 @@
  *
  * ----------------------------------------------------------------------------
  */
-#define CONFIG_SPL_BSS_START_ADDR	0x80A00000
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h
index b22fc6c..ad28251 100644
--- a/include/configs/capricorn-common.h
+++ b/include/configs/capricorn-common.h
@@ -17,7 +17,6 @@
 
 #define CONFIG_SYS_MONITOR_LEN		(1024 * 1024)
 
-#define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SYS_SPL_MALLOC_START	0x00120000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
 #define CONFIG_MALLOC_F_ADDR		0x00120000
diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h
index d12feda..2c029f4 100644
--- a/include/configs/cgtqmx8.h
+++ b/include/configs/cgtqmx8.h
@@ -14,7 +14,6 @@
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
 
-#define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SYS_SPL_MALLOC_START	0x00120000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
 #define CONFIG_SERIAL_LPUART_BASE	0x5a060000
diff --git a/include/configs/ci20.h b/include/configs/ci20.h
index f049740..bcec884 100644
--- a/include/configs/ci20.h
+++ b/include/configs/ci20.h
@@ -32,8 +32,6 @@
 
 /* SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	0xf4004000
-
 #define CONFIG_SPL_START_S_PATH		"arch/mips/mach-jz47xx"
 
 #endif /* __CONFIG_CI20_H__ */
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 03f7ceb..c2aef08 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -45,8 +45,6 @@
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-
 #if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) || defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA)
 /* SPL related MMC defines */
 #ifdef CONFIG_SPL_BUILD
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index 62465ac..914d7ec 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -37,8 +37,6 @@
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(160 << 10)
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 /* SPL related MMC defines */
 #ifdef CONFIG_SPL_BUILD
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index f15e158..864a793 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -55,8 +55,6 @@
 
 /* Defines for SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
-
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 209a142..b488819 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -32,7 +32,6 @@
 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
 #define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
-#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE
 /* memtest start addr */
 
 /* memtest will be run on 16MB */
diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h
index e97ff21..7357f98 100644
--- a/include/configs/db-88f6720.h
+++ b/include/configs/db-88f6720.h
@@ -35,6 +35,4 @@
 /* SPL */
 /* Defines for SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
-
 #endif /* _CONFIG_DB_88F6720_H */
diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index 727756d..0b814f5 100644
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -42,8 +42,6 @@
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index c6ce784..fe75666 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -42,8 +42,6 @@
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 /* SPL related MMC defines */
 #ifdef CONFIG_SPL_BUILD
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index cade78b..808debc 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -54,8 +54,6 @@
 /* SPL */
 /* Defines for SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
-
 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 #define CONFIG_SPD_EEPROM		0x4e
 
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 6d0f63d..b46f622 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -23,8 +23,6 @@
  * other needs.
  */
 
-#define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
-
 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
 
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 16d59ed..7fa1a4e 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -46,8 +46,6 @@
 /* SPL */
 /* Defines for SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
-
 /* Default Environment */
 
 #define CONFIG_EXTRA_ENV_SETTINGS				\
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 2bc9c99..1c260c7 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -15,7 +15,6 @@
  * SPL
  */
 
-#define CONFIG_SPL_BSS_START_ADDR	0x00020000
 #define CONFIG_SYS_SPL_MALLOC_START	0x00040000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x0001ffff
 #define CONFIG_SYS_UBOOT_BASE		0xfff90000
diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index 380622c..ea54d99 100644
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -34,7 +34,6 @@
 
 /* SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h
index c012931..d21a9b9 100644
--- a/include/configs/gardena-smart-gateway-mt7688.h
+++ b/include/configs/gardena-smart-gateway-mt7688.h
@@ -17,7 +17,6 @@
 /* SPL */
 
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SPL_BSS_START_ADDR	0x80010000
 
 /* Dummy value */
 #define CONFIG_SYS_UBOOT_BASE		0
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index 86d441b..90a631c 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -45,8 +45,6 @@
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-
 #if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) || defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA)
 /* SPL related MMC defines */
 #ifdef CONFIG_SPL_BUILD
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index daf4429..0b0cf9d 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -20,11 +20,9 @@
 
 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
 	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
-#define CONFIG_SPL_BSS_START_ADDR      0x88200000
 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000		/* 1 MB */
 #else
-#define CONFIG_SPL_BSS_START_ADDR	0x18200000
 #define CONFIG_SYS_SPL_MALLOC_START	0x18300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
 #endif
diff --git a/include/configs/imx7_spl.h b/include/configs/imx7_spl.h
index 9fe0dbd..6f7ec9e 100644
--- a/include/configs/imx7_spl.h
+++ b/include/configs/imx7_spl.h
@@ -17,7 +17,6 @@
 #define CONFIG_SYS_MONITOR_LEN			409600	/* 400 KB */
 #endif
 
-#define CONFIG_SPL_BSS_START_ADDR      0x88200000
 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000		/* 1 MB */
 
diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h
index 0e16d14..638e8cc 100644
--- a/include/configs/imx8mm-cl-iot-gate.h
+++ b/include/configs/imx8mm-cl-iot-gate.h
@@ -17,7 +17,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h
index d28774c..09788eb 100644
--- a/include/configs/imx8mm_beacon.h
+++ b/include/configs/imx8mm_beacon.h
@@ -14,7 +14,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h
index ed819e3..17d0f19 100644
--- a/include/configs/imx8mm_data_modul_edm_sbc.h
+++ b/include/configs/imx8mm_data_modul_edm_sbc.h
@@ -15,7 +15,6 @@
 #define CONFIG_SYS_MONITOR_LEN		SZ_1M
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_16M	/* 16 MiB */
 
diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index b6dda33..a6ae1ab 100644
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -16,7 +16,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h
index ffe88f7..b3ee0e2 100644
--- a/include/configs/imx8mm_icore_mx8mm.h
+++ b/include/configs/imx8mm_icore_mx8mm.h
@@ -15,7 +15,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-# define CONFIG_SPL_BSS_START_ADDR	0x910000
 # define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 # define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 
diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h
index eb30ed1..4b41f35 100644
--- a/include/configs/imx8mm_venice.h
+++ b/include/configs/imx8mm_venice.h
@@ -14,7 +14,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_1M
 
diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h
index 3b99ba4..5fac4ad 100644
--- a/include/configs/imx8mn_beacon.h
+++ b/include/configs/imx8mn_beacon.h
@@ -14,7 +14,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x0095e000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 
diff --git a/include/configs/imx8mn_bsh_smm_s2_common.h b/include/configs/imx8mn_bsh_smm_s2_common.h
index 60faedb..5aa5a31 100644
--- a/include/configs/imx8mn_bsh_smm_s2_common.h
+++ b/include/configs/imx8mn_bsh_smm_s2_common.h
@@ -16,7 +16,6 @@
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
-#define CONFIG_SPL_BSS_START_ADDR	0x950000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 
diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index fac2c26..8f19967 100644
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -17,7 +17,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x950000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h
index 699a51c..d9cf466 100644
--- a/include/configs/imx8mn_var_som.h
+++ b/include/configs/imx8mn_var_som.h
@@ -16,7 +16,6 @@
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
-#define CONFIG_SPL_BSS_START_ADDR	0x950000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 
diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h
index 5807da5..7a449c9 100644
--- a/include/configs/imx8mn_venice.h
+++ b/include/configs/imx8mn_venice.h
@@ -14,7 +14,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x950000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/imx8mp_dhcom_pdk2.h b/include/configs/imx8mp_dhcom_pdk2.h
index abe2457..33b101d 100644
--- a/include/configs/imx8mp_dhcom_pdk2.h
+++ b/include/configs/imx8mp_dhcom_pdk2.h
@@ -15,7 +15,6 @@
 #define CONFIG_SYS_MONITOR_LEN		SZ_1M
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x0096FC00
 #define CONFIG_SYS_SPL_MALLOC_START	0x4c000000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 kiB */
 
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index 1cfd63d..ba059f7 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -17,7 +17,6 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_BSS_START_ADDR	0x0098FC00
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h
index 97f66bd..f98f04b 100644
--- a/include/configs/imx8mp_rsb3720.h
+++ b/include/configs/imx8mp_rsb3720.h
@@ -27,7 +27,6 @@
 		 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x0098FC00
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h
index 074f5b0..2933e4a 100644
--- a/include/configs/imx8mp_venice.h
+++ b/include/configs/imx8mp_venice.h
@@ -14,7 +14,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x0098FC00
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index fc4b1c5..11ed33d 100644
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -15,7 +15,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000	/* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index 179c5123..b9dbbb7 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -16,7 +16,6 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000	/* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index bc74953..4507d7c 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -13,7 +13,6 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000	/* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index 4f3e004..6971941 100644
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -15,7 +15,6 @@
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
 
-#define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SYS_SPL_MALLOC_START	0x00120000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
 #define CONFIG_SERIAL_LPUART_BASE	0x5a060000
diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h
index 1f86b79..88d38a1 100644
--- a/include/configs/imx8qm_rom7720.h
+++ b/include/configs/imx8qm_rom7720.h
@@ -10,8 +10,6 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SPL_BSS_START_ADDR	0x00128000
-
 #define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define USDHC1_BASE_ADDR		0x5B010000
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 7afc648..0a6746c 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -13,7 +13,6 @@
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
 
-#define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SYS_SPL_MALLOC_START	0x00120000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
 #define CONFIG_SERIAL_LPUART_BASE	0x5a060000
diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h
index 55b1795..34ebfda 100644
--- a/include/configs/imx8ulp_evk.h
+++ b/include/configs/imx8ulp_evk.h
@@ -14,7 +14,6 @@
 #define CONFIG_SYS_UBOOT_BASE	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x22048000
 #define CONFIG_SYS_SPL_MALLOC_START	0x22040000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x8000	/* 32 KB */
 
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index ba3f9de..8e7861f 100644
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -24,15 +24,6 @@
 /* Image load address in RAM for DFU boot*/
 #else
 #define CONFIG_SYS_UBOOT_BASE		0x50080000
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
 /* Set the stack right below the SPL BSS section */
 /* Configure R5 SPL post-relocation malloc pool in DDR */
 #define CONFIG_SYS_SPL_MALLOC_START	0x84000000
diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h
index 3103fac..6099db1 100644
--- a/include/configs/j721s2_evm.h
+++ b/include/configs/j721s2_evm.h
@@ -25,15 +25,6 @@
 /* Image load address in RAM for DFU boot*/
 #else
 #define CONFIG_SYS_UBOOT_BASE		0x50080000
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(0x41c80000 -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
 /* Set the stack right below the SPL BSS section */
 /* Configure R5 SPL post-relocation malloc pool in DDR */
 #define CONFIG_SYS_SPL_MALLOC_START	0x84000000
diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h
index b2c826b..eb6c5e6 100644
--- a/include/configs/kontron-sl-mx8mm.h
+++ b/include/configs/kontron-sl-mx8mm.h
@@ -55,7 +55,6 @@
 #define CONFIG_SYS_BOOTM_LEN		SZ_64M
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h
index 08c6b80..f86b7fd 100644
--- a/include/configs/kontron_pitx_imx8m.h
+++ b/include/configs/kontron_pitx_imx8m.h
@@ -17,7 +17,6 @@
 		 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR       0x00180000
 #define CONFIG_SYS_SPL_MALLOC_START     0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE      SZ_512K
 #define CONFIG_SYS_SPL_PTE_RAM_BASE     0x41580000
diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index 52778dd..676e2c6 100644
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -41,7 +41,6 @@
 #define COUNTER_FREQUENCY_REAL		(get_board_sys_clk() / 4)
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
 
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h
index 56a0c99..2e077dd 100644
--- a/include/configs/linkit-smart-7688.h
+++ b/include/configs/linkit-smart-7688.h
@@ -17,7 +17,6 @@
 /* SPL */
 
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SPL_BSS_START_ADDR	0x80010000
 
 /* Dummy value */
 #define CONFIG_SYS_UBOOT_BASE		0
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 614b399..b592786 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -45,7 +45,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
 		CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SYS_MONITOR_LEN		0x80000
 #endif
 
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index fb50c82..bddd6be 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -14,7 +14,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
 		CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SYS_MONITOR_LEN		0xc0000
 #endif
 
@@ -25,7 +24,6 @@
 
 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SYS_MONITOR_LEN		0x80000
 #endif
 
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 3e9175f..97c3bbe 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -47,7 +47,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
 		CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
 
 #ifdef CONFIG_U_BOOT_HDR_SIZE
 /*
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 4470d97..1141a9b 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -49,7 +49,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
 		CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
 
 #ifdef CONFIG_U_BOOT_HDR_SIZE
 /*
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index a09486a..fee760f 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -49,7 +49,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_START_ADDR	0x8f000000
 
 #ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
@@ -70,7 +69,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
 #ifdef CONFIG_NXP_ESBC
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 92fcc45..d283c85 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -46,7 +46,6 @@
 
 /* SD boot SPL */
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_BSS_START_ADDR	0x8f000000
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
@@ -67,7 +66,6 @@
 
 #if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
 #define CONFIG_SPL_TARGET		"spl/u-boot-spl.pbl"
-#define CONFIG_SPL_BSS_START_ADDR	0x8f000000
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
@@ -79,7 +77,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SPL_BSS_START_ADDR	0x8f000000
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 1b8180f..83dcdda 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -144,7 +144,6 @@ unsigned long long get_qixis_addr(void);
 #endif
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index f33e369..e32159b 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -137,7 +137,6 @@ unsigned long long get_qixis_addr(void);
 	"mcinitcmd=fsl_mc start mc 0x580a00000"	\
 	" 0x580e00000 \0"
 
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
 #ifdef CONFIG_NAND_BOOT
diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index d728c1f..db84302 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -46,13 +46,6 @@
  * L2 cache thus cannot be used.
  */
 
-/* SPL */
-/* Defines for SPL */
-
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
-
-/* SPL related SPI defines */
-
 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 #define CONFIG_SYS_SDRAM_SIZE		SZ_1G
 
diff --git a/include/configs/mt7620.h b/include/configs/mt7620.h
index 9ecc55c..db4d68d 100644
--- a/include/configs/mt7620.h
+++ b/include/configs/mt7620.h
@@ -19,7 +19,6 @@
 /* SPL */
 
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SPL_BSS_START_ADDR	0x80010000
 
 /* Dummy value */
 #define CONFIG_SYS_UBOOT_BASE		0
diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h
index cc02cf0..4dcfa39 100644
--- a/include/configs/mt7628.h
+++ b/include/configs/mt7628.h
@@ -31,7 +31,6 @@
 /* SPL */
 
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SPL_BSS_START_ADDR	0x80010000
 
 /* Dummy value */
 #define CONFIG_SYS_UBOOT_BASE		0
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 6fefb1e..e3a679e 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -28,8 +28,6 @@
 #define PHYS_SDRAM_1_SIZE	(128 << 20) /* SDRAM size 128MB */
 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
 
-#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE
-
 /* memtest start addr */
 
 /* memtest will be run on 16MB */
diff --git a/include/configs/openpiton-riscv64.h b/include/configs/openpiton-riscv64.h
index e194fba..d3b638e 100644
--- a/include/configs/openpiton-riscv64.h
+++ b/include/configs/openpiton-riscv64.h
@@ -18,7 +18,6 @@
 #define CONFIG_SYS_BOOTM_LEN        SZ_256M
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_BSS_START_ADDR   0x82000000
 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
 		CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE  0x0100000
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index 2848914..bf08e7a 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -17,7 +17,6 @@
 		(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 
diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index 99aecda..c2e370d 100644
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -17,7 +17,6 @@
 		(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x98FC00
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 10e3e23..508909a 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -13,7 +13,6 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_BSS_START_ADDR	0x00180000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000	/* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE	0x41580000
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 6f49568..614bfad 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -48,7 +48,6 @@
 
 #ifdef CONFIG_SD_BOOT
 
-#define CONFIG_SPL_BSS_START_ADDR	0x70000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x70080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
 
diff --git a/include/configs/px30_common.h b/include/configs/px30_common.h
index 1cf239f..96dcfb4 100644
--- a/include/configs/px30_common.h
+++ b/include/configs/px30_common.h
@@ -13,7 +13,6 @@
 /* FIXME: ff020000 is pmu_mem (10k), while ff0e0000 is regular int_mem */
 #define CONFIG_IRAM_BASE		0xff020000
 
-#define CONFIG_SPL_BSS_START_ADDR	0x4000000
 #define CONFIG_SYS_BOOTM_LEN		(64 << 20)	/* 64M */
 
 #define GICD_BASE			0xff131000
diff --git a/include/configs/qemu-riscv.h b/include/configs/qemu-riscv.h
index 15e8ae9..9f4752a 100644
--- a/include/configs/qemu-riscv.h
+++ b/include/configs/qemu-riscv.h
@@ -10,7 +10,6 @@
 
 #ifdef CONFIG_SPL
 
-#define CONFIG_SPL_BSS_START_ADDR	0x84000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x84100000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
 
diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h
index 6cda691..ee9fc28 100644
--- a/include/configs/rcar-gen3-common.h
+++ b/include/configs/rcar-gen3-common.h
@@ -43,11 +43,4 @@
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootm_size=0x10000000\0"
 
-/* SPL support */
-#if defined(CONFIG_R8A7795) || defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965)
-#define CONFIG_SPL_BSS_START_ADDR	0xe633f000
-#else
-#define CONFIG_SPL_BSS_START_ADDR	0xe631f000
-#endif
-
 #endif	/* __RCAR_GEN3_COMMON_H */
diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h
index 2b0b367..169cf2a 100644
--- a/include/configs/rk3308_common.h
+++ b/include/configs/rk3308_common.h
@@ -8,8 +8,6 @@
 
 #include "rockchip-common.h"
 
-#define CONFIG_SPL_BSS_START_ADDR	0x00400000
-
 #define CONFIG_SYS_NS16550_MEM32
 
 #define CONFIG_IRAM_BASE		0xfff80000
diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
index 25e2c65..9cdc900 100644
--- a/include/configs/rk3328_common.h
+++ b/include/configs/rk3328_common.h
@@ -10,8 +10,6 @@
 
 #define CONFIG_IRAM_BASE		0xff090000
 
-#define CONFIG_SPL_BSS_START_ADDR	0x2000000
-
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* 64M */
 
 /* FAT sd card locations. */
diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h
index 1bdc8cf..ac88188 100644
--- a/include/configs/rk3368_common.h
+++ b/include/configs/rk3368_common.h
@@ -16,8 +16,6 @@
 
 #define CONFIG_IRAM_BASE		0xff8c0000
 
-#define CONFIG_SPL_BSS_START_ADDR       0x400000
-
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* 64M */
 
 #ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 112b863..3ca80c8 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -11,10 +11,8 @@
 #define CONFIG_IRAM_BASE		0xff8c0000
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
-#define CONFIG_SPL_BSS_START_ADDR	0x00400000
 #else
 /*  BSS setup */
-#define CONFIG_SPL_BSS_START_ADDR       0xff8e0000
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* 64M */
diff --git a/include/configs/rk3568_common.h b/include/configs/rk3568_common.h
index c0721aa..f9c7c23 100644
--- a/include/configs/rk3568_common.h
+++ b/include/configs/rk3568_common.h
@@ -10,8 +10,6 @@
 
 #define CONFIG_IRAM_BASE		0xfdcc0000
 
-#define CONFIG_SPL_BSS_START_ADDR	0x4000000
-
 #define CONFIG_SYS_BOOTM_LEN		(64 << 20)	/* 64M */
 
 #define CONFIG_SYS_SDRAM_BASE		0
diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h
index dd5f8d8..8a39069 100644
--- a/include/configs/sama5d27_som1_ek.h
+++ b/include/configs/sama5d27_som1_ek.h
@@ -15,7 +15,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK      24000000 /* from 24 MHz crystal */
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/sama5d27_wlsom1_ek.h b/include/configs/sama5d27_wlsom1_ek.h
index 728dc9f..14a6e0f 100644
--- a/include/configs/sama5d27_wlsom1_ek.h
+++ b/include/configs/sama5d27_wlsom1_ek.h
@@ -20,7 +20,6 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x10000000
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h
index 0645c21..3b1e809 100644
--- a/include/configs/sama5d2_icp.h
+++ b/include/configs/sama5d2_icp.h
@@ -27,7 +27,6 @@
 #endif
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 8481b02..8802053 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -12,7 +12,6 @@
 #include "at91-sama5_common.h"
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 23ffab2..eb8f15f 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -49,7 +49,6 @@
 #endif
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index e293002..fe3adec 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -61,7 +61,6 @@
 #endif
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 825925c..c589b07 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -26,7 +26,6 @@
 #endif
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index d2466da..d5cfd21 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -26,7 +26,6 @@
 #endif
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 8a81ae4..4d2e927 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -52,8 +52,6 @@
 
 /* Defines for SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	0x80000000
-
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h
index 9a460de..9734e1e 100644
--- a/include/configs/sifive-unleashed.h
+++ b/include/configs/sifive-unleashed.h
@@ -13,7 +13,6 @@
 
 #ifdef CONFIG_SPL
 
-#define CONFIG_SPL_BSS_START_ADDR	0x85000000
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					 CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h
index 6453cc9..be19471 100644
--- a/include/configs/sifive-unmatched.h
+++ b/include/configs/sifive-unmatched.h
@@ -13,7 +13,6 @@
 
 #ifdef CONFIG_SPL
 
-#define CONFIG_SPL_BSS_START_ADDR	0x85000000
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					 CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index d84a2c2..1e50874 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -114,7 +114,6 @@
 
 /* Defines for SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
diff --git a/include/configs/sniper.h b/include/configs/sniper.h
index 923da0e..9f17cd6 100644
--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@@ -48,7 +48,6 @@
  * SPL
  */
 
-#define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	(1024 * 1024)
 
diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h
index b73ce91..a794237 100644
--- a/include/configs/socfpga_soc64_common.h
+++ b/include/configs/socfpga_soc64_common.h
@@ -144,8 +144,6 @@ unsigned int cm_get_l4_sys_free_clk_hz(void);
  *
  */
 #define CONFIG_SPL_TARGET		"spl/u-boot-spl-dtb.hex"
-#define CONFIG_SPL_BSS_START_ADDR	(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \
-					- CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	(CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR \
 					- CONFIG_SYS_SPL_MALLOC_SIZE)
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 3431366..5b543fd 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -49,16 +49,13 @@
 #ifdef CONFIG_MACH_SUN9I
 #define SDRAM_OFFSET(x) 0x2##x
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SPL_BSS_START_ADDR	0x2ff80000
 #elif defined(CONFIG_MACH_SUNIV)
 #define SDRAM_OFFSET(x) 0x8##x
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SPL_BSS_START_ADDR	0x81f80000
 #else
 #define SDRAM_OFFSET(x) 0x4##x
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 /* V3s do not have enough memory to place code at 0x4a000000 */
-#define CONFIG_SPL_BSS_START_ADDR	0x4ff80000
 #endif
 
 /*
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index d7dba72..ef856f0 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -146,8 +146,6 @@
 					CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 
-#define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
-
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index e5e21ef..c81e89e 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -74,8 +74,6 @@
 /* SPL */
 /* Defines for SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
-
 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 #define CONFIG_SYS_SDRAM_SIZE		SZ_2G
 
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 9c1f5ea..777e788 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -86,8 +86,6 @@
 
 /* Defines for SPL */
 
-#define CONFIG_SPL_BSS_START_ADDR	0x80000000
-
 #define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
 
 /*
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 316a215..7a19fc4 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -113,9 +113,6 @@
  * of the BSS area.  We suggest that the stack be placed at 32MiB after the
  * start of DRAM to allow room for all of the above (handled in Kconfig).
  */
-#ifndef CONFIG_SPL_BSS_START_ADDR
-#define CONFIG_SPL_BSS_START_ADDR	0x80a00000
-#endif
 #ifndef CONFIG_SYS_SPL_MALLOC_START
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					 CONFIG_SPL_BSS_MAX_SIZE)
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 1cc593f..4a6d9bf 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -25,8 +25,6 @@
 #endif
 
 /* SPL SPI Loader Configuration */
-#define CONFIG_SPL_BSS_START_ADDR	(CONFIG_ISW_ENTRY_ADDR + \
-					CONFIG_SPL_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	(32 * 1024)
diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 4dc27a3..4bbc992 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -29,8 +29,6 @@
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-
 #ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
 /* SPL related MMC defines */
 # ifdef CONFIG_SPL_BUILD
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index de79691..4fc7617 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -16,7 +16,6 @@
 #define CONFIG_SYS_BOOTM_LEN           SZ_64M
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index e6eb986..47bb532 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -15,7 +15,6 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_BSS_START_ADDR	0x0098fc00
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 
diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h
index 5a215f1..6a7a083 100644
--- a/include/configs/vocore2.h
+++ b/include/configs/vocore2.h
@@ -17,7 +17,6 @@
 /* SPL */
 
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SPL_BSS_START_ADDR	0x80010000
 
 /* Dummy value */
 #define CONFIG_SYS_UBOOT_BASE		0
diff --git a/include/configs/x530.h b/include/configs/x530.h
index 8b690cd..e66d8af 100644
--- a/include/configs/x530.h
+++ b/include/configs/x530.h
@@ -69,6 +69,4 @@
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
 
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-
 #endif /* _CONFIG_X530_H */
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index b6f345b..3e766b5 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -199,9 +199,6 @@
 	"dfu_bufsiz=0x1000\0"
 #endif
 
-/* Just random location in OCM */
-#define CONFIG_SPL_BSS_START_ADDR	0x0
-
 #if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
 # define CONFIG_SYS_SPI_KERNEL_OFFS	0x80000
 # define CONFIG_SYS_SPI_ARGS_OFFS	0xa0000
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index a0e276b..d29d423 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -238,7 +238,4 @@
  * Set it up as limit for now.
  */
 
-/* BSS setup */
-#define CONFIG_SPL_BSS_START_ADDR	0x100000
-
 #endif /* __CONFIG_ZYNQ_COMMON_H */
diff --git a/include/configs/zynq_cse.h b/include/configs/zynq_cse.h
index ff9d6d1..cb982c2 100644
--- a/include/configs/zynq_cse.h
+++ b/include/configs/zynq_cse.h
@@ -18,7 +18,5 @@
 #undef CONFIG_SYS_INIT_RAM_SIZE
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFDE000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#undef CONFIG_SPL_BSS_START_ADDR
-#define CONFIG_SPL_BSS_START_ADDR	0x20000
 
 #endif /* __CONFIG_ZYNQ_CSE_H */