Convert CONFIG_SPL_DRIVERS_MISC et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_DRIVERS_MISC
   CONFIG_SPL_ENV_SUPPORT
   CONFIG_SPL_GPIO
   CONFIG_SPL_I2C
   CONFIG_SPL_LDSCRIPT
   CONFIG_SPL_LIBCOMMON_SUPPORT
   CONFIG_SPL_LIBGENERIC_SUPPORT
   CONFIG_SPL_LOAD_FIT_ADDRESS
   CONFIG_SPL_MMC
   CONFIG_SPL_NAND_SUPPORT
   CONFIG_SPL_NO_CPU_SUPPORT
   CONFIG_SPL_OS_BOOT
   CONFIG_SPL_POWER
   CONFIG_SPL_STACK_R
   CONFIG_SPL_STACK_R_ADDR
   CONFIG_SPL_WATCHDOG
   CONFIG_SPL_TEXT_BASE

Signed-off-by: Tom Rini <trini@konsulko.com>

25 files changed, 1 insertions, 85 deletions

diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h
index 59e827e..58ab1b7 100644
--- a/include/configs/capricorn-common.h
+++ b/include/configs/capricorn-common.h
@@ -21,7 +21,6 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x800
 
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x013E000
 #define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h
index 11b186a..7ddd731 100644
--- a/include/configs/cgtqmx8.h
+++ b/include/configs/cgtqmx8.h
@@ -12,13 +12,11 @@
 #include <asm/arch/imx-regs.h>
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_TEXT_BASE				0x0
 #define CONFIG_SPL_MAX_SIZE				(124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x800
 
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x013E000
 #define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index 21e61e5..5120c7b 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -72,13 +72,8 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((212 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_I2C
-
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 /* SPL related MMC defines */
-#define CONFIG_SPL_MMC
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
 #endif
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 238d615..fed6545 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -162,12 +162,6 @@
 
 /* SPL */
 #ifdef CONFIG_SPL
-# ifdef CONFIG_ENV_IS_IN_NAND
-#  define CONFIG_SPL_NAND_SUPPORT
-# else
-#  define CONFIG_SPL_MMC
-# endif
-
 # include "imx6_spl.h"
 #endif
 
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index 2427603..1c636d9 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -20,7 +20,6 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x960000
 #define CONFIG_SPL_BSS_START_ADDR	0x0098FC00
 #define CONFIG_SPL_BSS_MAX_SIZE		0x400	/* 1 KB */
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index dd768eb..53fbeff 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -19,16 +19,7 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_DRIVERS_MISC
-#define CONFIG_SPL_POWER
-#define CONFIG_SPL_I2C
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x187FF0
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO
-#define CONFIG_SPL_MMC
 #define CONFIG_SPL_BSS_START_ADDR      0x00180000
 #define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index e6575da..d17f70f 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -16,16 +16,7 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_DRIVERS_MISC
-#define CONFIG_SPL_POWER
-#define CONFIG_SPL_I2C
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x187FF0
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO
-#define CONFIG_SPL_MMC
 #define CONFIG_SPL_BSS_START_ADDR      0x00180000
 #define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index d3c3e58..11b5c16 100644
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -18,7 +18,6 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x800
 
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x013E000
 #define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 3b1f957..f59a9ef 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -16,7 +16,6 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x800
 
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x013E000
 #define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h
index 8e9a159..919eb5f 100644
--- a/include/configs/imx8ulp_evk.h
+++ b/include/configs/imx8ulp_evk.h
@@ -18,7 +18,6 @@
 #define CONFIG_SYS_UBOOT_BASE	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x22050000
 #define CONFIG_SPL_BSS_START_ADDR	0x22048000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x2000	/* 8 KB */
@@ -27,8 +26,6 @@
 
 #define CONFIG_MALLOC_F_ADDR		0x22040000
 
-#define CONFIG_SPL_LOAD_FIT_ADDRESS	0x95000000 /* SPL_RAM needed */
-
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */
 
 #endif
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 7a7640a..f73dafe 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -48,12 +48,6 @@
 #define SDRAM_CFG_BI			0x00000001
 
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_I2C
-#define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_MMC
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
 
 #define CONFIG_SPL_MAX_SIZE		0x1a000
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index f199c94..7822e9d 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -95,14 +95,7 @@
 /* NAND SPL */
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_I2C
-
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC
+
 #define CONFIG_SPL_MAX_SIZE		0x17000		/* 90 KiB */
 #define CONFIG_SPL_STACK		0x1001f000
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 9ae0b8e..c816ee1 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -204,7 +204,6 @@ unsigned long long get_qixis_addr(void);
 #ifdef CONFIG_SPL
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE            0x16000
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h
index a080322..11b9ceb 100644
--- a/include/configs/mccmon6.h
+++ b/include/configs/mccmon6.h
@@ -9,7 +9,6 @@
 
 #include "mx6_common.h"
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
 #include "imx6_spl.h"
 
 #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 5c0b729..983402f 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -39,8 +39,4 @@
 
 /* MMC */
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_DRIVERS_MISC
-#endif
-
 #endif
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index eeb535e..32b44fe 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -38,10 +38,6 @@
 
 #define CONFIG_ARMV7_SECURE_BASE	0x00900000
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_DRIVERS_MISC
-#endif
-
 /*
  * If we have defined the OPTEE ram size and not OPTEE it means that we were
  * launched by OPTEE, because of that we shall skip all the low level
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 51624a2..591c572 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -45,7 +45,6 @@
 
 /* SPL */
 #ifndef CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NO_CPU_SUPPORT
 #define CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/mxs"
 #endif
 
diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index 874c94e..356544a 100644
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -20,7 +20,6 @@
 		(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x960000
 #define CONFIG_SPL_BSS_START_ADDR	0x98FC00
 #define CONFIG_SPL_BSS_MAX_SIZE		SZ_1K
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index f8805a1..2afcf00 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -16,16 +16,7 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_DRIVERS_MISC
-#define CONFIG_SPL_POWER
-#define CONFIG_SPL_I2C
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x187FF0
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO
-#define CONFIG_SPL_MMC
 #define CONFIG_SPL_BSS_START_ADDR	0x00180000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x2000	/* 8 KB */
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
diff --git a/include/configs/sama5d27_wlsom1_ek.h b/include/configs/sama5d27_wlsom1_ek.h
index 09ebf48..e611e7b 100644
--- a/include/configs/sama5d27_wlsom1_ek.h
+++ b/include/configs/sama5d27_wlsom1_ek.h
@@ -27,7 +27,6 @@
 #endif
 
 /* SPL */
-#define CONFIG_SPL_TEXT_BASE		0x200000
 #define CONFIG_SPL_MAX_SIZE		0x10000
 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 2538287..f43304d 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -137,8 +137,6 @@
 
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR		0x301000
-#define CONFIG_SPL_STACK_R
-#define CONFIG_SPL_STACK_R_ADDR		CONFIG_SYS_TEXT_BASE
 #else
 /*
  * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index c576d65..7260eb7 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -48,7 +48,6 @@
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
-#define CONFIG_SPL_STACK_R_ADDR		0x2fe00000
 #define CONFIG_SPL_BSS_START_ADDR	0x2ff80000
 #else
 #define SDRAM_OFFSET(x) 0x4##x
@@ -57,7 +56,6 @@
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
-#define CONFIG_SPL_STACK_R_ADDR		0x4fe00000
 #define CONFIG_SPL_BSS_START_ADDR	0x4ff80000
 #endif
 
diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index 18179e9..cbb5c6d 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -22,9 +22,6 @@
 #define CONFIG_SPL_MAX_FOOTPRINT	CONFIG_SYS_SPI_U_BOOT_OFFS
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 
-/* No falcon support */
-#undef CONFIG_SPL_OS_BOOT
-
 /* FPGA commands that we don't use */
 
 /* Extras */
diff --git a/include/configs/vyasa-rk3288.h b/include/configs/vyasa-rk3288.h
index 3dc10b2..8725925 100644
--- a/include/configs/vyasa-rk3288.h
+++ b/include/configs/vyasa-rk3288.h
@@ -21,9 +21,6 @@
 	func(MMC, mmc, 1) \
 
 #ifndef CONFIG_TPL_BUILD
-
-#define CONFIG_SPL_OS_BOOT
-
 /* Falcon Mode */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME	"args"
 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"uImage"
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index f8607b7..e214805 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -251,7 +251,6 @@
 #endif
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
-# define CONFIG_SPL_ENV_SUPPORT
 # define CONFIG_SPL_HASH
 # define CONFIG_ENV_MAX_ENTRIES	10
 #endif