ARM: renesas: Rename ARCH_RMOBILE to ARCH_RENESAS

Rename ARCH_RMOBILE to ARCH_RENESAS because all the chips are made
by Renesas, while only a subset of them is from the R-Mobile
line.

Use the following command to perform the rename:

"
$ git grep -l 'ARCH_RMOBILE' | xargs -I {} sed -i 's@ARCH_RMOBILE@ARCH_RENESAS@g' {}
"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>

10 files changed, 13 insertions, 13 deletions

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index e9296ed..a093027 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -1,6 +1,6 @@
 config CLK_RENESAS
 	bool "Renesas clock drivers"
-	depends on CLK && ARCH_RMOBILE
+	depends on CLK && ARCH_RENESAS
 	help
 	  Enable support for clock present on Renesas SoCs.
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 27df5d8..2df3dc4 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -333,7 +333,7 @@ config PCF8575_GPIO
 
 config RCAR_GPIO
 	bool "Renesas RCar GPIO driver"
-	depends on DM_GPIO && ARCH_RMOBILE
+	depends on DM_GPIO && ARCH_RENESAS
 	help
 	  This driver supports the GPIO banks on Renesas RCar SoCs.
 
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 4f42200..5f919f2 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -544,7 +544,7 @@ config SPL_SYS_I2C_SANDBOX
 
 config SYS_I2C_SH
 	bool "Legacy SuperH I2C interface"
-	depends on ARCH_RMOBILE && SYS_I2C_LEGACY
+	depends on ARCH_RENESAS && SYS_I2C_LEGACY
 	help
 	  Enable the legacy SuperH I2C interface.
 
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 17618c3..cef0579 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -393,7 +393,7 @@ config HSMMC2_8BIT
 
 config SH_MMCIF
 	bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
-	depends on ARCH_RMOBILE || SH
+	depends on ARCH_RENESAS || SH
 	help
 	  Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
 
@@ -408,7 +408,7 @@ config MMC_UNIPHIER
 
 config RENESAS_SDHI
 	bool "Renesas R-Car SD/MMC Host Controller support"
-	depends on ARCH_RMOBILE
+	depends on ARCH_RENESAS
 	depends on BLK && DM_MMC
 	depends on OF_CONTROL
 	select BOUNCE_BUFFER
diff --git a/drivers/mmc/sh_mmcif.h b/drivers/mmc/sh_mmcif.h
index 66341e5..b131b8c 100644
--- a/drivers/mmc/sh_mmcif.h
+++ b/drivers/mmc/sh_mmcif.h
@@ -195,7 +195,7 @@ struct sh_mmcif_regs {
 #define SOFT_RST_OFF		(0 << 31)
 
 #define CLKDEV_EMMC_DATA	52000000	/* 52MHz */
-#ifdef CONFIG_ARCH_RMOBILE
+#ifdef CONFIG_ARCH_RENESAS
 #define MMC_CLK_DIV_MIN(clk)	(clk / (1 << 9))
 #define MMC_CLK_DIV_MAX(clk)	(clk / (1 << 1))
 #else
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 0e929d8..6d7b7cd 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_PINCTRL_INTEL) += intel/
 obj-$(CONFIG_ARCH_MTMIPS) += mtmips/
 obj-$(CONFIG_ARCH_NPCM)         += nuvoton/
 obj-$(CONFIG_PINCTRL_QCOM) += qcom/
-obj-$(CONFIG_ARCH_RMOBILE) += renesas/
+obj-$(CONFIG_ARCH_RENESAS) += renesas/
 obj-$(CONFIG_ARCH_RZN1) += renesas/
 obj-$(CONFIG_PINCTRL_SANDBOX)	+= pinctrl-sandbox.o
 obj-$(CONFIG_PINCTRL_SUNXI)	+= sunxi/
diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig
index 171cd37..57e8860 100644
--- a/drivers/pinctrl/renesas/Kconfig
+++ b/drivers/pinctrl/renesas/Kconfig
@@ -1,8 +1,8 @@
-if ARCH_RMOBILE
+if ARCH_RENESAS
 
 config PINCTRL_PFC
 	bool "Renesas pin control drivers"
-	depends on DM && ARCH_RMOBILE
+	depends on DM && ARCH_RENESAS
 	default n if CPU_RZA1
 	help
 	  Support pin multiplexing control on Renesas SoCs.
diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile
index 985990a..c9c46cc 100644
--- a/drivers/ram/Makefile
+++ b/drivers/ram/Makefile
@@ -28,5 +28,5 @@ obj-$(CONFIG_DRAM_SUN20I_D1) += sunxi/
 
 obj-$(CONFIG_ARCH_OCTEON) += octeon/
 
-obj-$(CONFIG_ARCH_RMOBILE) += renesas/
+obj-$(CONFIG_ARCH_RENESAS) += renesas/
 obj-$(CONFIG_CADENCE_DDR_CTRL) += cadence/
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 26460c4..88d6786 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -433,7 +433,7 @@ config DEBUG_UART_SEMIHOSTING
 
 config DEBUG_UART_SCIF
 	bool "Renesas SCIF UART"
-	depends on SH || ARCH_RMOBILE
+	depends on SH || ARCH_RENESAS
 	help
 	  Select this to enable a debug UART using the serial_sh driver. You
 	  will need to provide parameters to make this work. The driver will
@@ -893,7 +893,7 @@ config SANDBOX_SERIAL
 
 config SCIF_CONSOLE
 	bool "Renesas SCIF UART support"
-	depends on SH || ARCH_RMOBILE
+	depends on SH || ARCH_RENESAS
 	help
 	  Select this to enable Renesas SCIF UART. To operate serial ports
 	  on systems with RCar or SH SoCs, say Y to this option. If unsure,
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index f96027d..6e10b62 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -97,7 +97,7 @@ config USB_XHCI_PCI
 config USB_XHCI_RCAR
 	bool "Renesas RCar USB 3.0 support"
 	default y
-	depends on ARCH_RMOBILE
+	depends on ARCH_RENESAS
 	help
 	  Choose this option to add support for USB 3.0 driver on Renesas
 	  RCar Gen3 SoCs.