Merge branch 'master' of git://git.denx.de/u-boot-socfpga

5 files changed, 1747 insertions, 0 deletions

diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index eabbf27..edbd520 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,9 +23,11 @@ obj-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
 obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
 obj-$(CONFIG_BFIN_SPI) += bfin_spi.o
 obj-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o
+obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
 obj-$(CONFIG_CF_SPI) += cf_spi.o
 obj-$(CONFIG_CF_QSPI) += cf_qspi.o
 obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
+obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
 obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
 obj-$(CONFIG_FTSSP010_SPI) += ftssp010_spi.o
 obj-$(CONFIG_ICH_SPI) +=  ich.o
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
new file mode 100644
index 0000000..fa95b19
--- /dev/null
+++ b/drivers/spi/cadence_qspi.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (C) 2012
+ * Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/errno.h>
+#include "cadence_qspi.h"
+
+#define CQSPI_STIG_READ			0
+#define CQSPI_STIG_WRITE		1
+#define CQSPI_INDIRECT_READ		2
+#define CQSPI_INDIRECT_WRITE		3
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int cadence_spi_write_speed(struct udevice *bus, uint hz)
+{
+	struct cadence_spi_platdata *plat = bus->platdata;
+	struct cadence_spi_priv *priv = dev_get_priv(bus);
+
+	cadence_qspi_apb_config_baudrate_div(priv->regbase,
+					     CONFIG_CQSPI_REF_CLK, hz);
+
+	/* Reconfigure delay timing if speed is changed. */
+	cadence_qspi_apb_delay(priv->regbase, CONFIG_CQSPI_REF_CLK, hz,
+			       plat->tshsl_ns, plat->tsd2d_ns,
+			       plat->tchsh_ns, plat->tslch_ns);
+
+	return 0;
+}
+
+/* Calibration sequence to determine the read data capture delay register */
+static int spi_calibration(struct udevice *bus)
+{
+	struct cadence_spi_platdata *plat = bus->platdata;
+	struct cadence_spi_priv *priv = dev_get_priv(bus);
+	void *base = priv->regbase;
+	u8 opcode_rdid = 0x9F;
+	unsigned int idcode = 0, temp = 0;
+	int err = 0, i, range_lo = -1, range_hi = -1;
+
+	/* start with slowest clock (1 MHz) */
+	cadence_spi_write_speed(bus, 1000000);
+
+	/* configure the read data capture delay register to 0 */
+	cadence_qspi_apb_readdata_capture(base, 1, 0);
+
+	/* Enable QSPI */
+	cadence_qspi_apb_controller_enable(base);
+
+	/* read the ID which will be our golden value */
+	err = cadence_qspi_apb_command_read(base, 1, &opcode_rdid,
+		3, (u8 *)&idcode);
+	if (err) {
+		puts("SF: Calibration failed (read)\n");
+		return err;
+	}
+
+	/* use back the intended clock and find low range */
+	cadence_spi_write_speed(bus, plat->max_hz);
+	for (i = 0; i < CQSPI_READ_CAPTURE_MAX_DELAY; i++) {
+		/* Disable QSPI */
+		cadence_qspi_apb_controller_disable(base);
+
+		/* reconfigure the read data capture delay register */
+		cadence_qspi_apb_readdata_capture(base, 1, i);
+
+		/* Enable back QSPI */
+		cadence_qspi_apb_controller_enable(base);
+
+		/* issue a RDID to get the ID value */
+		err = cadence_qspi_apb_command_read(base, 1, &opcode_rdid,
+			3, (u8 *)&temp);
+		if (err) {
+			puts("SF: Calibration failed (read)\n");
+			return err;
+		}
+
+		/* search for range lo */
+		if (range_lo == -1 && temp == idcode) {
+			range_lo = i;
+			continue;
+		}
+
+		/* search for range hi */
+		if (range_lo != -1 && temp != idcode) {
+			range_hi = i - 1;
+			break;
+		}
+		range_hi = i;
+	}
+
+	if (range_lo == -1) {
+		puts("SF: Calibration failed (low range)\n");
+		return err;
+	}
+
+	/* Disable QSPI for subsequent initialization */
+	cadence_qspi_apb_controller_disable(base);
+
+	/* configure the final value for read data capture delay register */
+	cadence_qspi_apb_readdata_capture(base, 1, (range_hi + range_lo) / 2);
+	debug("SF: Read data capture delay calibrated to %i (%i - %i)\n",
+	      (range_hi + range_lo) / 2, range_lo, range_hi);
+
+	/* just to ensure we do once only when speed or chip select change */
+	priv->qspi_calibrated_hz = plat->max_hz;
+	priv->qspi_calibrated_cs = spi_chip_select(bus);
+
+	return 0;
+}
+
+static int cadence_spi_set_speed(struct udevice *bus, uint hz)
+{
+	struct cadence_spi_platdata *plat = bus->platdata;
+	struct cadence_spi_priv *priv = dev_get_priv(bus);
+	int err;
+
+	/* Disable QSPI */
+	cadence_qspi_apb_controller_disable(priv->regbase);
+
+	cadence_spi_write_speed(bus, hz);
+
+	/* Calibration required for different SCLK speed or chip select */
+	if (priv->qspi_calibrated_hz != plat->max_hz ||
+	    priv->qspi_calibrated_cs != spi_chip_select(bus)) {
+		err = spi_calibration(bus);
+		if (err)
+			return err;
+	}
+
+	/* Enable QSPI */
+	cadence_qspi_apb_controller_enable(priv->regbase);
+
+	debug("%s: speed=%d\n", __func__, hz);
+
+	return 0;
+}
+
+static int cadence_spi_probe(struct udevice *bus)
+{
+	struct cadence_spi_platdata *plat = bus->platdata;
+	struct cadence_spi_priv *priv = dev_get_priv(bus);
+
+	priv->regbase = plat->regbase;
+	priv->ahbbase = plat->ahbbase;
+
+	if (!priv->qspi_is_init) {
+		cadence_qspi_apb_controller_init(plat);
+		priv->qspi_is_init = 1;
+	}
+
+	return 0;
+}
+
+static int cadence_spi_set_mode(struct udevice *bus, uint mode)
+{
+	struct cadence_spi_priv *priv = dev_get_priv(bus);
+	unsigned int clk_pol = (mode & SPI_CPOL) ? 1 : 0;
+	unsigned int clk_pha = (mode & SPI_CPHA) ? 1 : 0;
+
+	/* Disable QSPI */
+	cadence_qspi_apb_controller_disable(priv->regbase);
+
+	/* Set SPI mode */
+	cadence_qspi_apb_set_clk_mode(priv->regbase, clk_pol, clk_pha);
+
+	/* Enable QSPI */
+	cadence_qspi_apb_controller_enable(priv->regbase);
+
+	return 0;
+}
+
+static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen,
+			    const void *dout, void *din, unsigned long flags)
+{
+	struct udevice *bus = dev->parent;
+	struct cadence_spi_platdata *plat = bus->platdata;
+	struct cadence_spi_priv *priv = dev_get_priv(bus);
+	void *base = priv->regbase;
+	u8 *cmd_buf = priv->cmd_buf;
+	size_t data_bytes;
+	int err = 0;
+	u32 mode = CQSPI_STIG_WRITE;
+
+	if (flags & SPI_XFER_BEGIN) {
+		/* copy command to local buffer */
+		priv->cmd_len = bitlen / 8;
+		memcpy(cmd_buf, dout, priv->cmd_len);
+	}
+
+	if (flags == (SPI_XFER_BEGIN | SPI_XFER_END)) {
+		/* if start and end bit are set, the data bytes is 0. */
+		data_bytes = 0;
+	} else {
+		data_bytes = bitlen / 8;
+	}
+	debug("%s: len=%d [bytes]\n", __func__, data_bytes);
+
+	/* Set Chip select */
+	cadence_qspi_apb_chipselect(base, spi_chip_select(dev),
+				    CONFIG_CQSPI_DECODER);
+
+	if ((flags & SPI_XFER_END) || (flags == 0)) {
+		if (priv->cmd_len == 0) {
+			printf("QSPI: Error, command is empty.\n");
+			return -1;
+		}
+
+		if (din && data_bytes) {
+			/* read */
+			/* Use STIG if no address. */
+			if (!CQSPI_IS_ADDR(priv->cmd_len))
+				mode = CQSPI_STIG_READ;
+			else
+				mode = CQSPI_INDIRECT_READ;
+		} else if (dout && !(flags & SPI_XFER_BEGIN)) {
+			/* write */
+			if (!CQSPI_IS_ADDR(priv->cmd_len))
+				mode = CQSPI_STIG_WRITE;
+			else
+				mode = CQSPI_INDIRECT_WRITE;
+		}
+
+		switch (mode) {
+		case CQSPI_STIG_READ:
+			err = cadence_qspi_apb_command_read(
+				base, priv->cmd_len, cmd_buf,
+				data_bytes, din);
+
+		break;
+		case CQSPI_STIG_WRITE:
+			err = cadence_qspi_apb_command_write(base,
+				priv->cmd_len, cmd_buf,
+				data_bytes, dout);
+		break;
+		case CQSPI_INDIRECT_READ:
+			err = cadence_qspi_apb_indirect_read_setup(plat,
+				priv->cmd_len, cmd_buf);
+			if (!err) {
+				err = cadence_qspi_apb_indirect_read_execute
+				(plat, data_bytes, din);
+			}
+		break;
+		case CQSPI_INDIRECT_WRITE:
+			err = cadence_qspi_apb_indirect_write_setup
+				(plat, priv->cmd_len, cmd_buf);
+			if (!err) {
+				err = cadence_qspi_apb_indirect_write_execute
+				(plat, data_bytes, dout);
+			}
+		break;
+		default:
+			err = -1;
+			break;
+		}
+
+		if (flags & SPI_XFER_END) {
+			/* clear command buffer */
+			memset(cmd_buf, 0, sizeof(priv->cmd_buf));
+			priv->cmd_len = 0;
+		}
+	}
+
+	return err;
+}
+
+static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
+{
+	struct cadence_spi_platdata *plat = bus->platdata;
+	const void *blob = gd->fdt_blob;
+	int node = bus->of_offset;
+	int subnode;
+	u32 data[4];
+	int ret;
+
+	/* 2 base addresses are needed, lets get them from the DT */
+	ret = fdtdec_get_int_array(blob, node, "reg", data, ARRAY_SIZE(data));
+	if (ret) {
+		printf("Error: Can't get base addresses (ret=%d)!\n", ret);
+		return -ENODEV;
+	}
+
+	plat->regbase = (void *)data[0];
+	plat->ahbbase = (void *)data[2];
+
+	/* Use 500KHz as a suitable default */
+	plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
+				      500000);
+
+	/* All other paramters are embedded in the child node */
+	subnode = fdt_first_subnode(blob, node);
+	if (!subnode) {
+		printf("Error: subnode with SPI flash config missing!\n");
+		return -ENODEV;
+	}
+
+	/* Read other parameters from DT */
+	plat->page_size = fdtdec_get_int(blob, subnode, "page-size", 256);
+	plat->block_size = fdtdec_get_int(blob, subnode, "block-size", 16);
+	plat->tshsl_ns = fdtdec_get_int(blob, subnode, "tshsl-ns", 200);
+	plat->tsd2d_ns = fdtdec_get_int(blob, subnode, "tsd2d-ns", 255);
+	plat->tchsh_ns = fdtdec_get_int(blob, subnode, "tchsh-ns", 20);
+	plat->tslch_ns = fdtdec_get_int(blob, subnode, "tslch-ns", 20);
+
+	debug("%s: regbase=%p ahbbase=%p max-frequency=%d page-size=%d\n",
+	      __func__, plat->regbase, plat->ahbbase, plat->max_hz,
+	      plat->page_size);
+
+	return 0;
+}
+
+static const struct dm_spi_ops cadence_spi_ops = {
+	.xfer		= cadence_spi_xfer,
+	.set_speed	= cadence_spi_set_speed,
+	.set_mode	= cadence_spi_set_mode,
+	/*
+	 * cs_info is not needed, since we require all chip selects to be
+	 * in the device tree explicitly
+	 */
+};
+
+static const struct udevice_id cadence_spi_ids[] = {
+	{ .compatible = "cadence,qspi" },
+	{ }
+};
+
+U_BOOT_DRIVER(cadence_spi) = {
+	.name = "cadence_spi",
+	.id = UCLASS_SPI,
+	.of_match = cadence_spi_ids,
+	.ops = &cadence_spi_ops,
+	.ofdata_to_platdata = cadence_spi_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct cadence_spi_platdata),
+	.priv_auto_alloc_size = sizeof(struct cadence_spi_priv),
+	.per_child_auto_alloc_size = sizeof(struct spi_slave),
+	.probe = cadence_spi_probe,
+};
diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h
new file mode 100644
index 0000000..c9a6142
--- /dev/null
+++ b/drivers/spi/cadence_qspi.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012
+ * Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CADENCE_QSPI_H__
+#define __CADENCE_QSPI_H__
+
+#define CQSPI_IS_ADDR(cmd_len)		(cmd_len > 1 ? 1 : 0)
+
+#define CQSPI_NO_DECODER_MAX_CS		4
+#define CQSPI_DECODER_MAX_CS		16
+#define CQSPI_READ_CAPTURE_MAX_DELAY	16
+
+struct cadence_spi_platdata {
+	unsigned int	max_hz;
+	void		*regbase;
+	void		*ahbbase;
+
+	u32		page_size;
+	u32		block_size;
+	u32		tshsl_ns;
+	u32		tsd2d_ns;
+	u32		tchsh_ns;
+	u32		tslch_ns;
+};
+
+struct cadence_spi_priv {
+	void		*regbase;
+	void		*ahbbase;
+	size_t		cmd_len;
+	u8		cmd_buf[32];
+	size_t		data_len;
+
+	int		qspi_is_init;
+	unsigned int	qspi_calibrated_hz;
+	unsigned int	qspi_calibrated_cs;
+};
+
+/* Functions call declaration */
+void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat);
+void cadence_qspi_apb_controller_enable(void *reg_base_addr);
+void cadence_qspi_apb_controller_disable(void *reg_base_addr);
+
+int cadence_qspi_apb_command_read(void *reg_base_addr,
+	unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen, u8 *rxbuf);
+int cadence_qspi_apb_command_write(void *reg_base_addr,
+	unsigned int cmdlen, const u8 *cmdbuf,
+	unsigned int txlen,  const u8 *txbuf);
+
+int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
+	unsigned int cmdlen, const u8 *cmdbuf);
+int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
+	unsigned int rxlen, u8 *rxbuf);
+int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
+	unsigned int cmdlen, const u8 *cmdbuf);
+int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
+	unsigned int txlen, const u8 *txbuf);
+
+void cadence_qspi_apb_chipselect(void *reg_base,
+	unsigned int chip_select, unsigned int decoder_enable);
+void cadence_qspi_apb_set_clk_mode(void *reg_base_addr,
+	unsigned int clk_pol, unsigned int clk_pha);
+void cadence_qspi_apb_config_baudrate_div(void *reg_base,
+	unsigned int ref_clk_hz, unsigned int sclk_hz);
+void cadence_qspi_apb_delay(void *reg_base,
+	unsigned int ref_clk, unsigned int sclk_hz,
+	unsigned int tshsl_ns, unsigned int tsd2d_ns,
+	unsigned int tchsh_ns, unsigned int tslch_ns);
+void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy);
+void cadence_qspi_apb_readdata_capture(void *reg_base,
+	unsigned int bypass, unsigned int delay);
+
+#endif /* __CADENCE_QSPI_H__ */
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
new file mode 100644
index 0000000..00a115f
--- /dev/null
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -0,0 +1,898 @@
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *  - Neither the name of the Altera Corporation nor the
+ *    names of its contributors may be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include "cadence_qspi.h"
+
+#define CQSPI_REG_POLL_US			(1) /* 1us */
+#define CQSPI_REG_RETRY				(10000)
+#define CQSPI_POLL_IDLE_RETRY			(3)
+
+#define CQSPI_FIFO_WIDTH			(4)
+
+/* Controller sram size in word */
+#define CQSPI_REG_SRAM_SIZE_WORD		(128)
+#define CQSPI_REG_SRAM_RESV_WORDS		(2)
+#define CQSPI_REG_SRAM_PARTITION_WR		(1)
+#define CQSPI_REG_SRAM_PARTITION_RD		\
+	(CQSPI_REG_SRAM_SIZE_WORD - CQSPI_REG_SRAM_RESV_WORDS)
+#define CQSPI_REG_SRAM_THRESHOLD_WORDS		(50)
+
+/* Transfer mode */
+#define CQSPI_INST_TYPE_SINGLE			(0)
+#define CQSPI_INST_TYPE_DUAL			(1)
+#define CQSPI_INST_TYPE_QUAD			(2)
+
+#define CQSPI_STIG_DATA_LEN_MAX			(8)
+#define CQSPI_INDIRECTTRIGGER_ADDR_MASK		(0xFFFFF)
+
+#define CQSPI_DUMMY_CLKS_PER_BYTE		(8)
+#define CQSPI_DUMMY_BYTES_MAX			(4)
+
+
+#define CQSPI_REG_SRAM_FILL_THRESHOLD	\
+	((CQSPI_REG_SRAM_SIZE_WORD / 2) * CQSPI_FIFO_WIDTH)
+/****************************************************************************
+ * Controller's configuration and status register (offset from QSPI_BASE)
+ ****************************************************************************/
+#define	CQSPI_REG_CONFIG			0x00
+#define	CQSPI_REG_CONFIG_CLK_POL_LSB		1
+#define	CQSPI_REG_CONFIG_CLK_PHA_LSB		2
+#define	CQSPI_REG_CONFIG_ENABLE_MASK		(1 << 0)
+#define	CQSPI_REG_CONFIG_DIRECT_MASK		(1 << 7)
+#define	CQSPI_REG_CONFIG_DECODE_MASK		(1 << 9)
+#define	CQSPI_REG_CONFIG_XIP_IMM_MASK		(1 << 18)
+#define	CQSPI_REG_CONFIG_CHIPSELECT_LSB		10
+#define	CQSPI_REG_CONFIG_BAUD_LSB		19
+#define	CQSPI_REG_CONFIG_IDLE_LSB		31
+#define	CQSPI_REG_CONFIG_CHIPSELECT_MASK	0xF
+#define	CQSPI_REG_CONFIG_BAUD_MASK		0xF
+
+#define	CQSPI_REG_RD_INSTR			0x04
+#define	CQSPI_REG_RD_INSTR_OPCODE_LSB		0
+#define	CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB	8
+#define	CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB	12
+#define	CQSPI_REG_RD_INSTR_TYPE_DATA_LSB	16
+#define	CQSPI_REG_RD_INSTR_MODE_EN_LSB		20
+#define	CQSPI_REG_RD_INSTR_DUMMY_LSB		24
+#define	CQSPI_REG_RD_INSTR_TYPE_INSTR_MASK	0x3
+#define	CQSPI_REG_RD_INSTR_TYPE_ADDR_MASK	0x3
+#define	CQSPI_REG_RD_INSTR_TYPE_DATA_MASK	0x3
+#define	CQSPI_REG_RD_INSTR_DUMMY_MASK		0x1F
+
+#define	CQSPI_REG_WR_INSTR			0x08
+#define	CQSPI_REG_WR_INSTR_OPCODE_LSB		0
+
+#define	CQSPI_REG_DELAY				0x0C
+#define	CQSPI_REG_DELAY_TSLCH_LSB		0
+#define	CQSPI_REG_DELAY_TCHSH_LSB		8
+#define	CQSPI_REG_DELAY_TSD2D_LSB		16
+#define	CQSPI_REG_DELAY_TSHSL_LSB		24
+#define	CQSPI_REG_DELAY_TSLCH_MASK		0xFF
+#define	CQSPI_REG_DELAY_TCHSH_MASK		0xFF
+#define	CQSPI_REG_DELAY_TSD2D_MASK		0xFF
+#define	CQSPI_REG_DELAY_TSHSL_MASK		0xFF
+
+#define	CQSPI_READLCAPTURE			0x10
+#define	CQSPI_READLCAPTURE_BYPASS_LSB		0
+#define	CQSPI_READLCAPTURE_DELAY_LSB		1
+#define	CQSPI_READLCAPTURE_DELAY_MASK		0xF
+
+#define	CQSPI_REG_SIZE				0x14
+#define	CQSPI_REG_SIZE_ADDRESS_LSB		0
+#define	CQSPI_REG_SIZE_PAGE_LSB			4
+#define	CQSPI_REG_SIZE_BLOCK_LSB		16
+#define	CQSPI_REG_SIZE_ADDRESS_MASK		0xF
+#define	CQSPI_REG_SIZE_PAGE_MASK		0xFFF
+#define	CQSPI_REG_SIZE_BLOCK_MASK		0x3F
+
+#define	CQSPI_REG_SRAMPARTITION			0x18
+#define	CQSPI_REG_INDIRECTTRIGGER		0x1C
+
+#define	CQSPI_REG_REMAP				0x24
+#define	CQSPI_REG_MODE_BIT			0x28
+
+#define	CQSPI_REG_SDRAMLEVEL			0x2C
+#define	CQSPI_REG_SDRAMLEVEL_RD_LSB		0
+#define	CQSPI_REG_SDRAMLEVEL_WR_LSB		16
+#define	CQSPI_REG_SDRAMLEVEL_RD_MASK		0xFFFF
+#define	CQSPI_REG_SDRAMLEVEL_WR_MASK		0xFFFF
+
+#define	CQSPI_REG_IRQSTATUS			0x40
+#define	CQSPI_REG_IRQMASK			0x44
+
+#define	CQSPI_REG_INDIRECTRD			0x60
+#define	CQSPI_REG_INDIRECTRD_START_MASK		(1 << 0)
+#define	CQSPI_REG_INDIRECTRD_CANCEL_MASK	(1 << 1)
+#define	CQSPI_REG_INDIRECTRD_INPROGRESS_MASK	(1 << 2)
+#define	CQSPI_REG_INDIRECTRD_DONE_MASK		(1 << 5)
+
+#define	CQSPI_REG_INDIRECTRDWATERMARK		0x64
+#define	CQSPI_REG_INDIRECTRDSTARTADDR		0x68
+#define	CQSPI_REG_INDIRECTRDBYTES		0x6C
+
+#define	CQSPI_REG_CMDCTRL			0x90
+#define	CQSPI_REG_CMDCTRL_EXECUTE_MASK		(1 << 0)
+#define	CQSPI_REG_CMDCTRL_INPROGRESS_MASK	(1 << 1)
+#define	CQSPI_REG_CMDCTRL_DUMMY_LSB		7
+#define	CQSPI_REG_CMDCTRL_WR_BYTES_LSB		12
+#define	CQSPI_REG_CMDCTRL_WR_EN_LSB		15
+#define	CQSPI_REG_CMDCTRL_ADD_BYTES_LSB		16
+#define	CQSPI_REG_CMDCTRL_ADDR_EN_LSB		19
+#define	CQSPI_REG_CMDCTRL_RD_BYTES_LSB		20
+#define	CQSPI_REG_CMDCTRL_RD_EN_LSB		23
+#define	CQSPI_REG_CMDCTRL_OPCODE_LSB		24
+#define	CQSPI_REG_CMDCTRL_DUMMY_MASK		0x1F
+#define	CQSPI_REG_CMDCTRL_WR_BYTES_MASK		0x7
+#define	CQSPI_REG_CMDCTRL_ADD_BYTES_MASK	0x3
+#define	CQSPI_REG_CMDCTRL_RD_BYTES_MASK		0x7
+#define	CQSPI_REG_CMDCTRL_OPCODE_MASK		0xFF
+
+#define	CQSPI_REG_INDIRECTWR			0x70
+#define	CQSPI_REG_INDIRECTWR_START_MASK		(1 << 0)
+#define	CQSPI_REG_INDIRECTWR_CANCEL_MASK	(1 << 1)
+#define	CQSPI_REG_INDIRECTWR_INPROGRESS_MASK	(1 << 2)
+#define	CQSPI_REG_INDIRECTWR_DONE_MASK		(1 << 5)
+
+#define	CQSPI_REG_INDIRECTWRWATERMARK		0x74
+#define	CQSPI_REG_INDIRECTWRSTARTADDR		0x78
+#define	CQSPI_REG_INDIRECTWRBYTES		0x7C
+
+#define	CQSPI_REG_CMDADDRESS			0x94
+#define	CQSPI_REG_CMDREADDATALOWER		0xA0
+#define	CQSPI_REG_CMDREADDATAUPPER		0xA4
+#define	CQSPI_REG_CMDWRITEDATALOWER		0xA8
+#define	CQSPI_REG_CMDWRITEDATAUPPER		0xAC
+
+#define CQSPI_REG_IS_IDLE(base)					\
+	((readl(base + CQSPI_REG_CONFIG) >>		\
+		CQSPI_REG_CONFIG_IDLE_LSB) & 0x1)
+
+#define CQSPI_CAL_DELAY(tdelay_ns, tref_ns, tsclk_ns)		\
+	((((tdelay_ns) - (tsclk_ns)) / (tref_ns)))
+
+#define CQSPI_GET_RD_SRAM_LEVEL(reg_base)			\
+	(((readl(reg_base + CQSPI_REG_SDRAMLEVEL)) >>	\
+	CQSPI_REG_SDRAMLEVEL_RD_LSB) & CQSPI_REG_SDRAMLEVEL_RD_MASK)
+
+#define CQSPI_GET_WR_SRAM_LEVEL(reg_base)			\
+	(((readl(reg_base + CQSPI_REG_SDRAMLEVEL)) >>	\
+	CQSPI_REG_SDRAMLEVEL_WR_LSB) & CQSPI_REG_SDRAMLEVEL_WR_MASK)
+
+static unsigned int cadence_qspi_apb_cmd2addr(const unsigned char *addr_buf,
+	unsigned int addr_width)
+{
+	unsigned int addr;
+
+	addr = (addr_buf[0] << 16) | (addr_buf[1] << 8) | addr_buf[2];
+
+	if (addr_width == 4)
+		addr = (addr << 8) | addr_buf[3];
+
+	return addr;
+}
+
+static void cadence_qspi_apb_read_fifo_data(void *dest,
+	const void *src_ahb_addr, unsigned int bytes)
+{
+	unsigned int temp;
+	int remaining = bytes;
+	unsigned int *dest_ptr = (unsigned int *)dest;
+	unsigned int *src_ptr = (unsigned int *)src_ahb_addr;
+
+	while (remaining > 0) {
+		if (remaining >= CQSPI_FIFO_WIDTH) {
+			*dest_ptr = readl(src_ptr);
+			remaining -= CQSPI_FIFO_WIDTH;
+		} else {
+			/* dangling bytes */
+			temp = readl(src_ptr);
+			memcpy(dest_ptr, &temp, remaining);
+			break;
+		}
+		dest_ptr++;
+	}
+
+	return;
+}
+
+static void cadence_qspi_apb_write_fifo_data(const void *dest_ahb_addr,
+	const void *src, unsigned int bytes)
+{
+	unsigned int temp;
+	int remaining = bytes;
+	unsigned int *dest_ptr = (unsigned int *)dest_ahb_addr;
+	unsigned int *src_ptr = (unsigned int *)src;
+
+	while (remaining > 0) {
+		if (remaining >= CQSPI_FIFO_WIDTH) {
+			writel(*src_ptr, dest_ptr);
+			remaining -= sizeof(unsigned int);
+		} else {
+			/* dangling bytes */
+			memcpy(&temp, src_ptr, remaining);
+			writel(temp, dest_ptr);
+			break;
+		}
+		src_ptr++;
+	}
+
+	return;
+}
+
+/* Read from SRAM FIFO with polling SRAM fill level. */
+static int qspi_read_sram_fifo_poll(const void *reg_base, void *dest_addr,
+			const void *src_addr,  unsigned int num_bytes)
+{
+	unsigned int remaining = num_bytes;
+	unsigned int retry;
+	unsigned int sram_level = 0;
+	unsigned char *dest = (unsigned char *)dest_addr;
+
+	while (remaining > 0) {
+		retry = CQSPI_REG_RETRY;
+		while (retry--) {
+			sram_level = CQSPI_GET_RD_SRAM_LEVEL(reg_base);
+			if (sram_level)
+				break;
+			udelay(1);
+		}
+
+		if (!retry) {
+			printf("QSPI: No receive data after polling for %d times\n",
+			       CQSPI_REG_RETRY);
+			return -1;
+		}
+
+		sram_level *= CQSPI_FIFO_WIDTH;
+		sram_level = sram_level > remaining ? remaining : sram_level;
+
+		/* Read data from FIFO. */
+		cadence_qspi_apb_read_fifo_data(dest, src_addr, sram_level);
+		dest += sram_level;
+		remaining -= sram_level;
+		udelay(1);
+	}
+	return 0;
+}
+
+/* Write to SRAM FIFO with polling SRAM fill level. */
+static int qpsi_write_sram_fifo_push(struct cadence_spi_platdata *plat,
+				const void *src_addr, unsigned int num_bytes)
+{
+	const void *reg_base = plat->regbase;
+	void *dest_addr = plat->ahbbase;
+	unsigned int retry = CQSPI_REG_RETRY;
+	unsigned int sram_level;
+	unsigned int wr_bytes;
+	unsigned char *src = (unsigned char *)src_addr;
+	int remaining = num_bytes;
+	unsigned int page_size = plat->page_size;
+	unsigned int sram_threshold_words = CQSPI_REG_SRAM_THRESHOLD_WORDS;
+
+	while (remaining > 0) {
+		retry = CQSPI_REG_RETRY;
+		while (retry--) {
+			sram_level = CQSPI_GET_WR_SRAM_LEVEL(reg_base);
+			if (sram_level <= sram_threshold_words)
+				break;
+		}
+		if (!retry) {
+			printf("QSPI: SRAM fill level (0x%08x) not hit lower expected level (0x%08x)",
+			       sram_level, sram_threshold_words);
+			return -1;
+		}
+		/* Write a page or remaining bytes. */
+		wr_bytes = (remaining > page_size) ?
+					page_size : remaining;
+
+		cadence_qspi_apb_write_fifo_data(dest_addr, src, wr_bytes);
+		src += wr_bytes;
+		remaining -= wr_bytes;
+	}
+
+	return 0;
+}
+
+void cadence_qspi_apb_controller_enable(void *reg_base)
+{
+	unsigned int reg;
+	reg = readl(reg_base + CQSPI_REG_CONFIG);
+	reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
+	writel(reg, reg_base + CQSPI_REG_CONFIG);
+	return;
+}
+
+void cadence_qspi_apb_controller_disable(void *reg_base)
+{
+	unsigned int reg;
+	reg = readl(reg_base + CQSPI_REG_CONFIG);
+	reg &= ~CQSPI_REG_CONFIG_ENABLE_MASK;
+	writel(reg, reg_base + CQSPI_REG_CONFIG);
+	return;
+}
+
+/* Return 1 if idle, otherwise return 0 (busy). */
+static unsigned int cadence_qspi_wait_idle(void *reg_base)
+{
+	unsigned int start, count = 0;
+	/* timeout in unit of ms */
+	unsigned int timeout = 5000;
+
+	start = get_timer(0);
+	for ( ; get_timer(start) < timeout ; ) {
+		if (CQSPI_REG_IS_IDLE(reg_base))
+			count++;
+		else
+			count = 0;
+		/*
+		 * Ensure the QSPI controller is in true idle state after
+		 * reading back the same idle status consecutively
+		 */
+		if (count >= CQSPI_POLL_IDLE_RETRY)
+			return 1;
+	}
+
+	/* Timeout, still in busy mode. */
+	printf("QSPI: QSPI is still busy after poll for %d times.\n",
+	       CQSPI_REG_RETRY);
+	return 0;
+}
+
+void cadence_qspi_apb_readdata_capture(void *reg_base,
+				unsigned int bypass, unsigned int delay)
+{
+	unsigned int reg;
+	cadence_qspi_apb_controller_disable(reg_base);
+
+	reg = readl(reg_base + CQSPI_READLCAPTURE);
+
+	if (bypass)
+		reg |= (1 << CQSPI_READLCAPTURE_BYPASS_LSB);
+	else
+		reg &= ~(1 << CQSPI_READLCAPTURE_BYPASS_LSB);
+
+	reg &= ~(CQSPI_READLCAPTURE_DELAY_MASK
+		<< CQSPI_READLCAPTURE_DELAY_LSB);
+
+	reg |= ((delay & CQSPI_READLCAPTURE_DELAY_MASK)
+		<< CQSPI_READLCAPTURE_DELAY_LSB);
+
+	writel(reg, reg_base + CQSPI_READLCAPTURE);
+
+	cadence_qspi_apb_controller_enable(reg_base);
+	return;
+}
+
+void cadence_qspi_apb_config_baudrate_div(void *reg_base,
+	unsigned int ref_clk_hz, unsigned int sclk_hz)
+{
+	unsigned int reg;
+	unsigned int div;
+
+	cadence_qspi_apb_controller_disable(reg_base);
+	reg = readl(reg_base + CQSPI_REG_CONFIG);
+	reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB);
+
+	div = ref_clk_hz / sclk_hz;
+
+	if (div > 32)
+		div = 32;
+
+	/* Check if even number. */
+	if ((div & 1)) {
+		div = (div / 2);
+	} else {
+		if (ref_clk_hz % sclk_hz)
+			/* ensure generated SCLK doesn't exceed user
+			specified sclk_hz */
+			div = (div / 2);
+		else
+			div = (div / 2) - 1;
+	}
+
+	debug("%s: ref_clk %dHz sclk %dHz Div 0x%x\n", __func__,
+	      ref_clk_hz, sclk_hz, div);
+
+	div = (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB;
+	reg |= div;
+	writel(reg, reg_base + CQSPI_REG_CONFIG);
+
+	cadence_qspi_apb_controller_enable(reg_base);
+	return;
+}
+
+void cadence_qspi_apb_set_clk_mode(void *reg_base,
+	unsigned int clk_pol, unsigned int clk_pha)
+{
+	unsigned int reg;
+
+	cadence_qspi_apb_controller_disable(reg_base);
+	reg = readl(reg_base + CQSPI_REG_CONFIG);
+	reg &= ~(1 <<
+		(CQSPI_REG_CONFIG_CLK_POL_LSB | CQSPI_REG_CONFIG_CLK_PHA_LSB));
+
+	reg |= ((clk_pol & 0x1) << CQSPI_REG_CONFIG_CLK_POL_LSB);
+	reg |= ((clk_pha & 0x1) << CQSPI_REG_CONFIG_CLK_PHA_LSB);
+
+	writel(reg, reg_base + CQSPI_REG_CONFIG);
+
+	cadence_qspi_apb_controller_enable(reg_base);
+	return;
+}
+
+void cadence_qspi_apb_chipselect(void *reg_base,
+	unsigned int chip_select, unsigned int decoder_enable)
+{
+	unsigned int reg;
+
+	cadence_qspi_apb_controller_disable(reg_base);
+
+	debug("%s : chipselect %d decode %d\n", __func__, chip_select,
+	      decoder_enable);
+
+	reg = readl(reg_base + CQSPI_REG_CONFIG);
+	/* docoder */
+	if (decoder_enable) {
+		reg |= CQSPI_REG_CONFIG_DECODE_MASK;
+	} else {
+		reg &= ~CQSPI_REG_CONFIG_DECODE_MASK;
+		/* Convert CS if without decoder.
+		 * CS0 to 4b'1110
+		 * CS1 to 4b'1101
+		 * CS2 to 4b'1011
+		 * CS3 to 4b'0111
+		 */
+		chip_select = 0xF & ~(1 << chip_select);
+	}
+
+	reg &= ~(CQSPI_REG_CONFIG_CHIPSELECT_MASK
+			<< CQSPI_REG_CONFIG_CHIPSELECT_LSB);
+	reg |= (chip_select & CQSPI_REG_CONFIG_CHIPSELECT_MASK)
+			<< CQSPI_REG_CONFIG_CHIPSELECT_LSB;
+	writel(reg, reg_base + CQSPI_REG_CONFIG);
+
+	cadence_qspi_apb_controller_enable(reg_base);
+	return;
+}
+
+void cadence_qspi_apb_delay(void *reg_base,
+	unsigned int ref_clk, unsigned int sclk_hz,
+	unsigned int tshsl_ns, unsigned int tsd2d_ns,
+	unsigned int tchsh_ns, unsigned int tslch_ns)
+{
+	unsigned int ref_clk_ns;
+	unsigned int sclk_ns;
+	unsigned int tshsl, tchsh, tslch, tsd2d;
+	unsigned int reg;
+
+	cadence_qspi_apb_controller_disable(reg_base);
+
+	/* Convert to ns. */
+	ref_clk_ns = (1000000000) / ref_clk;
+
+	/* Convert to ns. */
+	sclk_ns = (1000000000) / sclk_hz;
+
+	/* Plus 1 to round up 1 clock cycle. */
+	tshsl = CQSPI_CAL_DELAY(tshsl_ns, ref_clk_ns, sclk_ns) + 1;
+	tchsh = CQSPI_CAL_DELAY(tchsh_ns, ref_clk_ns, sclk_ns) + 1;
+	tslch = CQSPI_CAL_DELAY(tslch_ns, ref_clk_ns, sclk_ns) + 1;
+	tsd2d = CQSPI_CAL_DELAY(tsd2d_ns, ref_clk_ns, sclk_ns) + 1;
+
+	reg = ((tshsl & CQSPI_REG_DELAY_TSHSL_MASK)
+			<< CQSPI_REG_DELAY_TSHSL_LSB);
+	reg |= ((tchsh & CQSPI_REG_DELAY_TCHSH_MASK)
+			<< CQSPI_REG_DELAY_TCHSH_LSB);
+	reg |= ((tslch & CQSPI_REG_DELAY_TSLCH_MASK)
+			<< CQSPI_REG_DELAY_TSLCH_LSB);
+	reg |= ((tsd2d & CQSPI_REG_DELAY_TSD2D_MASK)
+			<< CQSPI_REG_DELAY_TSD2D_LSB);
+	writel(reg, reg_base + CQSPI_REG_DELAY);
+
+	cadence_qspi_apb_controller_enable(reg_base);
+	return;
+}
+
+void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat)
+{
+	unsigned reg;
+
+	cadence_qspi_apb_controller_disable(plat->regbase);
+
+	/* Configure the device size and address bytes */
+	reg = readl(plat->regbase + CQSPI_REG_SIZE);
+	/* Clear the previous value */
+	reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB);
+	reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB);
+	reg |= (plat->page_size << CQSPI_REG_SIZE_PAGE_LSB);
+	reg |= (plat->block_size << CQSPI_REG_SIZE_BLOCK_LSB);
+	writel(reg, plat->regbase + CQSPI_REG_SIZE);
+
+	/* Configure the remap address register, no remap */
+	writel(0, plat->regbase + CQSPI_REG_REMAP);
+
+	/* Disable all interrupts */
+	writel(0, plat->regbase + CQSPI_REG_IRQMASK);
+
+	cadence_qspi_apb_controller_enable(plat->regbase);
+	return;
+}
+
+static int cadence_qspi_apb_exec_flash_cmd(void *reg_base,
+	unsigned int reg)
+{
+	unsigned int retry = CQSPI_REG_RETRY;
+
+	/* Write the CMDCTRL without start execution. */
+	writel(reg, reg_base + CQSPI_REG_CMDCTRL);
+	/* Start execute */
+	reg |= CQSPI_REG_CMDCTRL_EXECUTE_MASK;
+	writel(reg, reg_base + CQSPI_REG_CMDCTRL);
+
+	while (retry--) {
+		reg = readl(reg_base + CQSPI_REG_CMDCTRL);
+		if ((reg & CQSPI_REG_CMDCTRL_INPROGRESS_MASK) == 0)
+			break;
+		udelay(1);
+	}
+
+	if (!retry) {
+		printf("QSPI: flash command execution timeout\n");
+		return -EIO;
+	}
+
+	/* Polling QSPI idle status. */
+	if (!cadence_qspi_wait_idle(reg_base))
+		return -EIO;
+
+	return 0;
+}
+
+/* For command RDID, RDSR. */
+int cadence_qspi_apb_command_read(void *reg_base,
+	unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen,
+	u8 *rxbuf)
+{
+	unsigned int reg;
+	unsigned int read_len;
+	int status;
+
+	if (!cmdlen || rxlen > CQSPI_STIG_DATA_LEN_MAX || rxbuf == NULL) {
+		printf("QSPI: Invalid input arguments cmdlen %d rxlen %d\n",
+		       cmdlen, rxlen);
+		return -EINVAL;
+	}
+
+	reg = cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB;
+
+	reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB);
+
+	/* 0 means 1 byte. */
+	reg |= (((rxlen - 1) & CQSPI_REG_CMDCTRL_RD_BYTES_MASK)
+		<< CQSPI_REG_CMDCTRL_RD_BYTES_LSB);
+	status = cadence_qspi_apb_exec_flash_cmd(reg_base, reg);
+	if (status != 0)
+		return status;
+
+	reg = readl(reg_base + CQSPI_REG_CMDREADDATALOWER);
+
+	/* Put the read value into rx_buf */
+	read_len = (rxlen > 4) ? 4 : rxlen;
+	memcpy(rxbuf, &reg, read_len);
+	rxbuf += read_len;
+
+	if (rxlen > 4) {
+		reg = readl(reg_base + CQSPI_REG_CMDREADDATAUPPER);
+
+		read_len = rxlen - read_len;
+		memcpy(rxbuf, &reg, read_len);
+	}
+	return 0;
+}
+
+/* For commands: WRSR, WREN, WRDI, CHIP_ERASE, BE, etc. */
+int cadence_qspi_apb_command_write(void *reg_base, unsigned int cmdlen,
+	const u8 *cmdbuf, unsigned int txlen,  const u8 *txbuf)
+{
+	unsigned int reg = 0;
+	unsigned int addr_value;
+	unsigned int wr_data;
+	unsigned int wr_len;
+
+	if (!cmdlen || cmdlen > 5 || txlen > 8 || cmdbuf == NULL) {
+		printf("QSPI: Invalid input arguments cmdlen %d txlen %d\n",
+		       cmdlen, txlen);
+		return -EINVAL;
+	}
+
+	reg |= cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB;
+
+	if (cmdlen == 4 || cmdlen == 5) {
+		/* Command with address */
+		reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB);
+		/* Number of bytes to write. */
+		reg |= ((cmdlen - 2) & CQSPI_REG_CMDCTRL_ADD_BYTES_MASK)
+			<< CQSPI_REG_CMDCTRL_ADD_BYTES_LSB;
+		/* Get address */
+		addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1],
+			cmdlen >= 5 ? 4 : 3);
+
+		writel(addr_value, reg_base + CQSPI_REG_CMDADDRESS);
+	}
+
+	if (txlen) {
+		/* writing data = yes */
+		reg |= (0x1 << CQSPI_REG_CMDCTRL_WR_EN_LSB);
+		reg |= ((txlen - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK)
+			<< CQSPI_REG_CMDCTRL_WR_BYTES_LSB;
+
+		wr_len = txlen > 4 ? 4 : txlen;
+		memcpy(&wr_data, txbuf, wr_len);
+		writel(wr_data, reg_base +
+			CQSPI_REG_CMDWRITEDATALOWER);
+
+		if (txlen > 4) {
+			txbuf += wr_len;
+			wr_len = txlen - wr_len;
+			memcpy(&wr_data, txbuf, wr_len);
+			writel(wr_data, reg_base +
+				CQSPI_REG_CMDWRITEDATAUPPER);
+		}
+	}
+
+	/* Execute the command */
+	return cadence_qspi_apb_exec_flash_cmd(reg_base, reg);
+}
+
+/* Opcode + Address (3/4 bytes) + dummy bytes (0-4 bytes) */
+int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
+	unsigned int cmdlen, const u8 *cmdbuf)
+{
+	unsigned int reg;
+	unsigned int rd_reg;
+	unsigned int addr_value;
+	unsigned int dummy_clk;
+	unsigned int dummy_bytes;
+	unsigned int addr_bytes;
+
+	/*
+	 * Identify addr_byte. All NOR flash device drivers are using fast read
+	 * which always expecting 1 dummy byte, 1 cmd byte and 3/4 addr byte.
+	 * With that, the length is in value of 5 or 6. Only FRAM chip from
+	 * ramtron using normal read (which won't need dummy byte).
+	 * Unlikely NOR flash using normal read due to performance issue.
+	 */
+	if (cmdlen >= 5)
+		/* to cater fast read where cmd + addr + dummy */
+		addr_bytes = cmdlen - 2;
+	else
+		/* for normal read (only ramtron as of now) */
+		addr_bytes = cmdlen - 1;
+
+	/* Setup the indirect trigger address */
+	writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
+	       plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
+
+	/* Configure SRAM partition for read. */
+	writel(CQSPI_REG_SRAM_PARTITION_RD, plat->regbase +
+	       CQSPI_REG_SRAMPARTITION);
+
+	/* Configure the opcode */
+	rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB;
+
+#if (CONFIG_SPI_FLASH_QUAD == 1)
+	/* Instruction and address at DQ0, data at DQ0-3. */
+	rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
+#endif
+
+	/* Get address */
+	addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);
+	writel(addr_value, plat->regbase + CQSPI_REG_INDIRECTRDSTARTADDR);
+
+	/* The remaining lenght is dummy bytes. */
+	dummy_bytes = cmdlen - addr_bytes - 1;
+	if (dummy_bytes) {
+		if (dummy_bytes > CQSPI_DUMMY_BYTES_MAX)
+			dummy_bytes = CQSPI_DUMMY_BYTES_MAX;
+
+		rd_reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB);
+#if defined(CONFIG_SPL_SPI_XIP) && defined(CONFIG_SPL_BUILD)
+		writel(0x0, plat->regbase + CQSPI_REG_MODE_BIT);
+#else
+		writel(0xFF, plat->regbase + CQSPI_REG_MODE_BIT);
+#endif
+
+		/* Convert to clock cycles. */
+		dummy_clk = dummy_bytes * CQSPI_DUMMY_CLKS_PER_BYTE;
+		/* Need to minus the mode byte (8 clocks). */
+		dummy_clk -= CQSPI_DUMMY_CLKS_PER_BYTE;
+
+		if (dummy_clk)
+			rd_reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK)
+				<< CQSPI_REG_RD_INSTR_DUMMY_LSB;
+	}
+
+	writel(rd_reg, plat->regbase + CQSPI_REG_RD_INSTR);
+
+	/* set device size */
+	reg = readl(plat->regbase + CQSPI_REG_SIZE);
+	reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
+	reg |= (addr_bytes - 1);
+	writel(reg, plat->regbase + CQSPI_REG_SIZE);
+	return 0;
+}
+
+int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
+	unsigned int rxlen, u8 *rxbuf)
+{
+	unsigned int reg;
+
+	writel(rxlen, plat->regbase + CQSPI_REG_INDIRECTRDBYTES);
+
+	/* Start the indirect read transfer */
+	writel(CQSPI_REG_INDIRECTRD_START_MASK,
+	       plat->regbase + CQSPI_REG_INDIRECTRD);
+
+	if (qspi_read_sram_fifo_poll(plat->regbase, (void *)rxbuf,
+				     (const void *)plat->ahbbase, rxlen))
+		goto failrd;
+
+	/* Check flash indirect controller */
+	reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD);
+	if (!(reg & CQSPI_REG_INDIRECTRD_DONE_MASK)) {
+		reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD);
+		printf("QSPI: indirect completion status error with reg 0x%08x\n",
+		       reg);
+		goto failrd;
+	}
+
+	/* Clear indirect completion status */
+	writel(CQSPI_REG_INDIRECTRD_DONE_MASK,
+	       plat->regbase + CQSPI_REG_INDIRECTRD);
+	return 0;
+
+failrd:
+	/* Cancel the indirect read */
+	writel(CQSPI_REG_INDIRECTRD_CANCEL_MASK,
+	       plat->regbase + CQSPI_REG_INDIRECTRD);
+	return -1;
+}
+
+/* Opcode + Address (3/4 bytes) */
+int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
+	unsigned int cmdlen, const u8 *cmdbuf)
+{
+	unsigned int reg;
+	unsigned int addr_bytes = cmdlen > 4 ? 4 : 3;
+
+	if (cmdlen < 4 || cmdbuf == NULL) {
+		printf("QSPI: iInvalid input argument, len %d cmdbuf 0x%08x\n",
+		       cmdlen, (unsigned int)cmdbuf);
+		return -EINVAL;
+	}
+	/* Setup the indirect trigger address */
+	writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
+	       plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
+
+	writel(CQSPI_REG_SRAM_PARTITION_WR,
+	       plat->regbase + CQSPI_REG_SRAMPARTITION);
+
+	/* Configure the opcode */
+	reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB;
+	writel(reg, plat->regbase + CQSPI_REG_WR_INSTR);
+
+	/* Setup write address. */
+	reg = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);
+	writel(reg, plat->regbase + CQSPI_REG_INDIRECTWRSTARTADDR);
+
+	reg = readl(plat->regbase + CQSPI_REG_SIZE);
+	reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
+	reg |= (addr_bytes - 1);
+	writel(reg, plat->regbase + CQSPI_REG_SIZE);
+	return 0;
+}
+
+int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
+	unsigned int txlen, const u8 *txbuf)
+{
+	unsigned int reg = 0;
+	unsigned int retry;
+
+	/* Configure the indirect read transfer bytes */
+	writel(txlen, plat->regbase + CQSPI_REG_INDIRECTWRBYTES);
+
+	/* Start the indirect write transfer */
+	writel(CQSPI_REG_INDIRECTWR_START_MASK,
+	       plat->regbase + CQSPI_REG_INDIRECTWR);
+
+	if (qpsi_write_sram_fifo_push(plat, (const void *)txbuf, txlen))
+		goto failwr;
+
+	/* Wait until last write is completed (FIFO empty) */
+	retry = CQSPI_REG_RETRY;
+	while (retry--) {
+		reg = CQSPI_GET_WR_SRAM_LEVEL(plat->regbase);
+		if (reg == 0)
+			break;
+
+		udelay(1);
+	}
+
+	if (reg != 0) {
+		printf("QSPI: timeout for indirect write\n");
+		goto failwr;
+	}
+
+	/* Check flash indirect controller status */
+	retry = CQSPI_REG_RETRY;
+	while (retry--) {
+		reg = readl(plat->regbase + CQSPI_REG_INDIRECTWR);
+		if (reg & CQSPI_REG_INDIRECTWR_DONE_MASK)
+			break;
+		udelay(1);
+	}
+
+	if (!(reg & CQSPI_REG_INDIRECTWR_DONE_MASK)) {
+		printf("QSPI: indirect completion status error with reg 0x%08x\n",
+		       reg);
+		goto failwr;
+	}
+
+	/* Clear indirect completion status */
+	writel(CQSPI_REG_INDIRECTWR_DONE_MASK,
+	       plat->regbase + CQSPI_REG_INDIRECTWR);
+	return 0;
+
+failwr:
+	/* Cancel the indirect write */
+	writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK,
+	       plat->regbase + CQSPI_REG_INDIRECTWR);
+	return -1;
+}
+
+void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy)
+{
+	unsigned int reg;
+
+	/* enter XiP mode immediately and enable direct mode */
+	reg = readl(reg_base + CQSPI_REG_CONFIG);
+	reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
+	reg |= CQSPI_REG_CONFIG_DIRECT_MASK;
+	reg |= CQSPI_REG_CONFIG_XIP_IMM_MASK;
+	writel(reg, reg_base + CQSPI_REG_CONFIG);
+
+	/* keep the XiP mode */
+	writel(xip_dummy, reg_base + CQSPI_REG_MODE_BIT);
+
+	/* Enable mode bit at devrd */
+	reg = readl(reg_base + CQSPI_REG_RD_INSTR);
+	reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB);
+	writel(reg, reg_base + CQSPI_REG_RD_INSTR);
+}
diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
new file mode 100644
index 0000000..98c9f03
--- /dev/null
+++ b/drivers/spi/designware_spi.c
@@ -0,0 +1,426 @@
+/*
+ * Designware master SPI core controller driver
+ *
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * Very loosely based on the Linux driver:
+ * drivers/spi/spi-dw.c, which is:
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <malloc.h>
+#include <spi.h>
+#include <fdtdec.h>
+#include <linux/compat.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Register offsets */
+#define DW_SPI_CTRL0			0x00
+#define DW_SPI_CTRL1			0x04
+#define DW_SPI_SSIENR			0x08
+#define DW_SPI_MWCR			0x0c
+#define DW_SPI_SER			0x10
+#define DW_SPI_BAUDR			0x14
+#define DW_SPI_TXFLTR			0x18
+#define DW_SPI_RXFLTR			0x1c
+#define DW_SPI_TXFLR			0x20
+#define DW_SPI_RXFLR			0x24
+#define DW_SPI_SR			0x28
+#define DW_SPI_IMR			0x2c
+#define DW_SPI_ISR			0x30
+#define DW_SPI_RISR			0x34
+#define DW_SPI_TXOICR			0x38
+#define DW_SPI_RXOICR			0x3c
+#define DW_SPI_RXUICR			0x40
+#define DW_SPI_MSTICR			0x44
+#define DW_SPI_ICR			0x48
+#define DW_SPI_DMACR			0x4c
+#define DW_SPI_DMATDLR			0x50
+#define DW_SPI_DMARDLR			0x54
+#define DW_SPI_IDR			0x58
+#define DW_SPI_VERSION			0x5c
+#define DW_SPI_DR			0x60
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET			0
+
+#define SPI_FRF_OFFSET			4
+#define SPI_FRF_SPI			0x0
+#define SPI_FRF_SSP			0x1
+#define SPI_FRF_MICROWIRE		0x2
+#define SPI_FRF_RESV			0x3
+
+#define SPI_MODE_OFFSET			6
+#define SPI_SCPH_OFFSET			6
+#define SPI_SCOL_OFFSET			7
+
+#define SPI_TMOD_OFFSET			8
+#define SPI_TMOD_MASK			(0x3 << SPI_TMOD_OFFSET)
+#define	SPI_TMOD_TR			0x0		/* xmit & recv */
+#define SPI_TMOD_TO			0x1		/* xmit only */
+#define SPI_TMOD_RO			0x2		/* recv only */
+#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET		10
+#define SPI_SRL_OFFSET			11
+#define SPI_CFS_OFFSET			12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK				0x7f		/* cover 7 bits */
+#define SR_BUSY				(1 << 0)
+#define SR_TF_NOT_FULL			(1 << 1)
+#define SR_TF_EMPT			(1 << 2)
+#define SR_RF_NOT_EMPT			(1 << 3)
+#define SR_RF_FULL			(1 << 4)
+#define SR_TX_ERR			(1 << 5)
+#define SR_DCOL				(1 << 6)
+
+#define RX_TIMEOUT			1000		/* timeout in ms */
+
+struct dw_spi_platdata {
+	s32 frequency;		/* Default clock frequency, -1 for none */
+	void __iomem *regs;
+};
+
+struct dw_spi_priv {
+	void __iomem *regs;
+	unsigned int freq;		/* Default frequency */
+	unsigned int mode;
+
+	int bits_per_word;
+	u8 cs;			/* chip select pin */
+	u8 tmode;		/* TR/TO/RO/EEPROM */
+	u8 type;		/* SPI/SSP/MicroWire */
+	int len;
+
+	u32 fifo_len;		/* depth of the FIFO buffer */
+	void *tx;
+	void *tx_end;
+	void *rx;
+	void *rx_end;
+};
+
+static inline u32 dw_readl(struct dw_spi_priv *priv, u32 offset)
+{
+	return __raw_readl(priv->regs + offset);
+}
+
+static inline void dw_writel(struct dw_spi_priv *priv, u32 offset, u32 val)
+{
+	__raw_writel(val, priv->regs + offset);
+}
+
+static inline u16 dw_readw(struct dw_spi_priv *priv, u32 offset)
+{
+	return __raw_readw(priv->regs + offset);
+}
+
+static inline void dw_writew(struct dw_spi_priv *priv, u32 offset, u16 val)
+{
+	__raw_writew(val, priv->regs + offset);
+}
+
+static int dw_spi_ofdata_to_platdata(struct udevice *bus)
+{
+	struct dw_spi_platdata *plat = bus->platdata;
+	const void *blob = gd->fdt_blob;
+	int node = bus->of_offset;
+
+	plat->regs = (struct dw_spi *)fdtdec_get_addr(blob, node, "reg");
+
+	/* Use 500KHz as a suitable default */
+	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
+					500000);
+	debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs,
+	      plat->frequency);
+
+	return 0;
+}
+
+static inline void spi_enable_chip(struct dw_spi_priv *priv, int enable)
+{
+	dw_writel(priv, DW_SPI_SSIENR, (enable ? 1 : 0));
+}
+
+/* Restart the controller, disable all interrupts, clean rx fifo */
+static void spi_hw_init(struct dw_spi_priv *priv)
+{
+	spi_enable_chip(priv, 0);
+	dw_writel(priv, DW_SPI_IMR, 0xff);
+	spi_enable_chip(priv, 1);
+
+	/*
+	 * Try to detect the FIFO depth if not set by interface driver,
+	 * the depth could be from 2 to 256 from HW spec
+	 */
+	if (!priv->fifo_len) {
+		u32 fifo;
+
+		for (fifo = 2; fifo <= 257; fifo++) {
+			dw_writew(priv, DW_SPI_TXFLTR, fifo);
+			if (fifo != dw_readw(priv, DW_SPI_TXFLTR))
+				break;
+		}
+
+		priv->fifo_len = (fifo == 257) ? 0 : fifo;
+		dw_writew(priv, DW_SPI_TXFLTR, 0);
+	}
+	debug("%s: fifo_len=%d\n", __func__, priv->fifo_len);
+}
+
+static int dw_spi_probe(struct udevice *bus)
+{
+	struct dw_spi_platdata *plat = dev_get_platdata(bus);
+	struct dw_spi_priv *priv = dev_get_priv(bus);
+
+	priv->regs = plat->regs;
+	priv->freq = plat->frequency;
+
+	/* Currently only bits_per_word == 8 supported */
+	priv->bits_per_word = 8;
+
+	priv->tmode = 0; /* Tx & Rx */
+
+	/* Basic HW init */
+	spi_hw_init(priv);
+
+	return 0;
+}
+
+/* Return the max entries we can fill into tx fifo */
+static inline u32 tx_max(struct dw_spi_priv *priv)
+{
+	u32 tx_left, tx_room, rxtx_gap;
+
+	tx_left = (priv->tx_end - priv->tx) / (priv->bits_per_word >> 3);
+	tx_room = priv->fifo_len - dw_readw(priv, DW_SPI_TXFLR);
+
+	/*
+	 * Another concern is about the tx/rx mismatch, we
+	 * thought about using (priv->fifo_len - rxflr - txflr) as
+	 * one maximum value for tx, but it doesn't cover the
+	 * data which is out of tx/rx fifo and inside the
+	 * shift registers. So a control from sw point of
+	 * view is taken.
+	 */
+	rxtx_gap = ((priv->rx_end - priv->rx) - (priv->tx_end - priv->tx)) /
+		(priv->bits_per_word >> 3);
+
+	return min3(tx_left, tx_room, (u32)(priv->fifo_len - rxtx_gap));
+}
+
+/* Return the max entries we should read out of rx fifo */
+static inline u32 rx_max(struct dw_spi_priv *priv)
+{
+	u32 rx_left = (priv->rx_end - priv->rx) / (priv->bits_per_word >> 3);
+
+	return min_t(u32, rx_left, dw_readw(priv, DW_SPI_RXFLR));
+}
+
+static void dw_writer(struct dw_spi_priv *priv)
+{
+	u32 max = tx_max(priv);
+	u16 txw = 0;
+
+	while (max--) {
+		/* Set the tx word if the transfer's original "tx" is not null */
+		if (priv->tx_end - priv->len) {
+			if (priv->bits_per_word == 8)
+				txw = *(u8 *)(priv->tx);
+			else
+				txw = *(u16 *)(priv->tx);
+		}
+		dw_writew(priv, DW_SPI_DR, txw);
+		debug("%s: tx=0x%02x\n", __func__, txw);
+		priv->tx += priv->bits_per_word >> 3;
+	}
+}
+
+static int dw_reader(struct dw_spi_priv *priv)
+{
+	unsigned start = get_timer(0);
+	u32 max;
+	u16 rxw;
+
+	/* Wait for rx data to be ready */
+	while (rx_max(priv) == 0) {
+		if (get_timer(start) > RX_TIMEOUT)
+			return -ETIMEDOUT;
+	}
+
+	max = rx_max(priv);
+
+	while (max--) {
+		rxw = dw_readw(priv, DW_SPI_DR);
+		debug("%s: rx=0x%02x\n", __func__, rxw);
+
+		/*
+		 * Care about rx only if the transfer's original "rx" is
+		 * not null
+		 */
+		if (priv->rx_end - priv->len) {
+			if (priv->bits_per_word == 8)
+				*(u8 *)(priv->rx) = rxw;
+			else
+				*(u16 *)(priv->rx) = rxw;
+		}
+		priv->rx += priv->bits_per_word >> 3;
+	}
+
+	return 0;
+}
+
+static int poll_transfer(struct dw_spi_priv *priv)
+{
+	int ret;
+
+	do {
+		dw_writer(priv);
+		ret = dw_reader(priv);
+		if (ret < 0)
+			return ret;
+	} while (priv->rx_end > priv->rx);
+
+	return 0;
+}
+
+static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
+		       const void *dout, void *din, unsigned long flags)
+{
+	struct udevice *bus = dev->parent;
+	struct dw_spi_priv *priv = dev_get_priv(bus);
+	const u8 *tx = dout;
+	u8 *rx = din;
+	int ret = 0;
+	u32 cr0 = 0;
+	u32 cs;
+
+	/* spi core configured to do 8 bit transfers */
+	if (bitlen % 8) {
+		debug("Non byte aligned SPI transfer.\n");
+		return -1;
+	}
+
+	cr0 = (priv->bits_per_word - 1) | (priv->type << SPI_FRF_OFFSET) |
+		(priv->mode << SPI_MODE_OFFSET) |
+		(priv->tmode << SPI_TMOD_OFFSET);
+
+	if (rx && tx)
+		priv->tmode = SPI_TMOD_TR;
+	else if (rx)
+		priv->tmode = SPI_TMOD_RO;
+	else
+		priv->tmode = SPI_TMOD_TO;
+
+	cr0 &= ~SPI_TMOD_MASK;
+	cr0 |= (priv->tmode << SPI_TMOD_OFFSET);
+
+	priv->len = bitlen >> 3;
+	debug("%s: rx=%p tx=%p len=%d [bytes]\n", __func__, rx, tx, priv->len);
+
+	priv->tx = (void *)tx;
+	priv->tx_end = priv->tx + priv->len;
+	priv->rx = rx;
+	priv->rx_end = priv->rx + priv->len;
+
+	/* Disable controller before writing control registers */
+	spi_enable_chip(priv, 0);
+
+	debug("%s: cr0=%08x\n", __func__, cr0);
+	/* Reprogram cr0 only if changed */
+	if (dw_readw(priv, DW_SPI_CTRL0) != cr0)
+		dw_writew(priv, DW_SPI_CTRL0, cr0);
+
+	/*
+	 * Configure the desired SS (slave select 0...3) in the controller
+	 * The DW SPI controller will activate and deactivate this CS
+	 * automatically. So no cs_activate() etc is needed in this driver.
+	 */
+	cs = spi_chip_select(dev);
+	dw_writel(priv, DW_SPI_SER, 1 << cs);
+
+	/* Enable controller after writing control registers */
+	spi_enable_chip(priv, 1);
+
+	/* Start transfer in a polling loop */
+	ret = poll_transfer(priv);
+
+	return ret;
+}
+
+static int dw_spi_set_speed(struct udevice *bus, uint speed)
+{
+	struct dw_spi_platdata *plat = bus->platdata;
+	struct dw_spi_priv *priv = dev_get_priv(bus);
+	u16 clk_div;
+
+	if (speed > plat->frequency)
+		speed = plat->frequency;
+
+	/* Disable controller before writing control registers */
+	spi_enable_chip(priv, 0);
+
+	/* clk_div doesn't support odd number */
+	clk_div = cm_get_spi_controller_clk_hz() / speed;
+	clk_div = (clk_div + 1) & 0xfffe;
+	dw_writel(priv, DW_SPI_BAUDR, clk_div);
+
+	/* Enable controller after writing control registers */
+	spi_enable_chip(priv, 1);
+
+	priv->freq = speed;
+	debug("%s: regs=%p speed=%d clk_div=%d\n", __func__, priv->regs,
+	      priv->freq, clk_div);
+
+	return 0;
+}
+
+static int dw_spi_set_mode(struct udevice *bus, uint mode)
+{
+	struct dw_spi_priv *priv = dev_get_priv(bus);
+
+	/*
+	 * Can't set mode yet. Since this depends on if rx, tx, or
+	 * rx & tx is requested. So we have to defer this to the
+	 * real transfer function.
+	 */
+	priv->mode = mode;
+	debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
+
+	return 0;
+}
+
+static const struct dm_spi_ops dw_spi_ops = {
+	.xfer		= dw_spi_xfer,
+	.set_speed	= dw_spi_set_speed,
+	.set_mode	= dw_spi_set_mode,
+	/*
+	 * cs_info is not needed, since we require all chip selects to be
+	 * in the device tree explicitly
+	 */
+};
+
+static const struct udevice_id dw_spi_ids[] = {
+	{ .compatible = "snps,dw-spi-mmio" },
+	{ }
+};
+
+U_BOOT_DRIVER(dw_spi) = {
+	.name = "dw_spi",
+	.id = UCLASS_SPI,
+	.of_match = dw_spi_ids,
+	.ops = &dw_spi_ops,
+	.ofdata_to_platdata = dw_spi_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct dw_spi_platdata),
+	.priv_auto_alloc_size = sizeof(struct dw_spi_priv),
+	.per_child_auto_alloc_size = sizeof(struct spi_slave),
+	.probe = dw_spi_probe,
+};